From 06d141e9b6f1e75fc2057af915c92cc9857a24cb Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Wed, 1 Aug 2012 17:38:14 -0300 Subject: i2c: imx: Use dev_info to indicate that i2c driver was succesfully registered It is useful information in dmesg to have a message indicating that the i2c driver was succesfully registered, so promote it to dev_info. Signed-off-by: Fabio Estevam Acked-by: Sascha Hauer Signed-off-by: Wolfram Sang diff --git a/drivers/i2c/busses/i2c-imx.c b/drivers/i2c/busses/i2c-imx.c index 0722f86..e143629 100644 --- a/drivers/i2c/busses/i2c-imx.c +++ b/drivers/i2c/busses/i2c-imx.c @@ -564,7 +564,7 @@ static int __init i2c_imx_probe(struct platform_device *pdev) resource_size(res), res->start); dev_dbg(&i2c_imx->adapter.dev, "adapter name: \"%s\"\n", i2c_imx->adapter.name); - dev_dbg(&i2c_imx->adapter.dev, "IMX I2C adapter registered\n"); + dev_info(&i2c_imx->adapter.dev, "IMX I2C adapter registered\n"); return 0; /* Return OK */ } -- cgit v0.10.2 From 002f002d956e6b01700ab8753c6f268c9aafc34a Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Wed, 1 Aug 2012 17:38:15 -0300 Subject: i2c: imx: Use dev_dbg logging style Use dev_dbg logging style as it is done in other parts of this driver. Signed-off-by: Fabio Estevam Acked-by: Sascha Hauer Signed-off-by: Wolfram Sang diff --git a/drivers/i2c/busses/i2c-imx.c b/drivers/i2c/busses/i2c-imx.c index e143629..2e1d5f4 100644 --- a/drivers/i2c/busses/i2c-imx.c +++ b/drivers/i2c/busses/i2c-imx.c @@ -272,9 +272,9 @@ static void __init i2c_imx_set_clk(struct imx_i2c_struct *i2c_imx, /* dev_dbg() can't be used, because adapter is not yet registered */ #ifdef CONFIG_I2C_DEBUG_BUS - printk(KERN_DEBUG "I2C: <%s> I2C_CLK=%d, REQ DIV=%d\n", + dev_dbg(&i2c_imx->adapter.dev, "<%s> I2C_CLK=%d, REQ DIV=%d\n", __func__, i2c_clk_rate, div); - printk(KERN_DEBUG "I2C: <%s> IFDR[IC]=0x%x, REAL DIV=%d\n", + dev_dbg(&i2c_imx->adapter.dev, "<%s> IFDR[IC]=0x%x, REAL DIV=%d\n", __func__, i2c_clk_div[i][1], i2c_clk_div[i][0]); #endif } -- cgit v0.10.2 From 5c3d8a46ac9778d117ca26f4fec18d7b8c8831ed Mon Sep 17 00:00:00 2001 From: Heiko Schocher Date: Mon, 30 Jul 2012 07:21:12 +0000 Subject: i2c: davinci: add OF support add of support for the davinci i2c driver. Signed-off-by: Heiko Schocher Signed-off-by: Sekhar Nori [wsa: fix indentation in the binding description] Signed-off-by: Wolfram Sang diff --git a/Documentation/devicetree/bindings/i2c/davinci.txt b/Documentation/devicetree/bindings/i2c/davinci.txt new file mode 100644 index 0000000..2dc935b --- /dev/null +++ b/Documentation/devicetree/bindings/i2c/davinci.txt @@ -0,0 +1,28 @@ +* Texas Instruments Davinci I2C + +This file provides information, what the device node for the +davinci i2c interface contain. + +Required properties: +- compatible: "ti,davinci-i2c"; +- reg : Offset and length of the register set for the device + +Recommended properties : +- interrupts : standard interrupt property. +- clock-frequency : desired I2C bus clock frequency in Hz. + +Example (enbw_cmc board): + i2c@1c22000 { + compatible = "ti,davinci-i2c"; + reg = <0x22000 0x1000>; + clock-frequency = <100000>; + interrupts = <15>; + interrupt-parent = <&intc>; + #address-cells = <1>; + #size-cells = <0>; + + dtt@48 { + compatible = "national,lm75"; + reg = <0x48>; + }; + }; diff --git a/drivers/i2c/busses/i2c-davinci.c b/drivers/i2c/busses/i2c-davinci.c index 79b4bcb..b6185dc 100644 --- a/drivers/i2c/busses/i2c-davinci.c +++ b/drivers/i2c/busses/i2c-davinci.c @@ -38,6 +38,8 @@ #include #include #include +#include +#include #include #include @@ -114,6 +116,7 @@ struct davinci_i2c_dev { struct completion xfr_complete; struct notifier_block freq_transition; #endif + struct davinci_i2c_platform_data *pdata; }; /* default platform data to use if not supplied in the platform_device */ @@ -155,7 +158,7 @@ static void generic_i2c_clock_pulse(unsigned int scl_pin) static void i2c_recover_bus(struct davinci_i2c_dev *dev) { u32 flag = 0; - struct davinci_i2c_platform_data *pdata = dev->dev->platform_data; + struct davinci_i2c_platform_data *pdata = dev->pdata; dev_err(dev->dev, "initiating i2c bus recovery\n"); /* Send NACK to the slave */ @@ -163,8 +166,7 @@ static void i2c_recover_bus(struct davinci_i2c_dev *dev) flag |= DAVINCI_I2C_MDR_NACK; /* write the data into mode register */ davinci_i2c_write_reg(dev, DAVINCI_I2C_MDR_REG, flag); - if (pdata) - generic_i2c_clock_pulse(pdata->scl_pin); + generic_i2c_clock_pulse(pdata->scl_pin); /* Send STOP */ flag = davinci_i2c_read_reg(dev, DAVINCI_I2C_MDR_REG); flag |= DAVINCI_I2C_MDR_STP; @@ -187,7 +189,7 @@ static inline void davinci_i2c_reset_ctrl(struct davinci_i2c_dev *i2c_dev, static void i2c_davinci_calc_clk_dividers(struct davinci_i2c_dev *dev) { - struct davinci_i2c_platform_data *pdata = dev->dev->platform_data; + struct davinci_i2c_platform_data *pdata = dev->pdata; u16 psc; u32 clk; u32 d; @@ -235,10 +237,7 @@ static void i2c_davinci_calc_clk_dividers(struct davinci_i2c_dev *dev) */ static int i2c_davinci_init(struct davinci_i2c_dev *dev) { - struct davinci_i2c_platform_data *pdata = dev->dev->platform_data; - - if (!pdata) - pdata = &davinci_i2c_platform_data_default; + struct davinci_i2c_platform_data *pdata = dev->pdata; /* put I2C into reset */ davinci_i2c_reset_ctrl(dev, 0); @@ -260,6 +259,7 @@ static int i2c_davinci_init(struct davinci_i2c_dev *dev) dev_dbg(dev->dev, "bus_freq = %dkHz, bus_delay = %d\n", pdata->bus_freq, pdata->bus_delay); + /* Take the I2C module out of reset: */ davinci_i2c_reset_ctrl(dev, 1); @@ -308,13 +308,11 @@ static int i2c_davinci_xfer_msg(struct i2c_adapter *adap, struct i2c_msg *msg, int stop) { struct davinci_i2c_dev *dev = i2c_get_adapdata(adap); - struct davinci_i2c_platform_data *pdata = dev->dev->platform_data; + struct davinci_i2c_platform_data *pdata = dev->pdata; u32 flag; u16 w; int r; - if (!pdata) - pdata = &davinci_i2c_platform_data_default; /* Introduce a delay, required for some boards (e.g Davinci EVM) */ if (pdata->bus_delay) udelay(pdata->bus_delay); @@ -635,6 +633,12 @@ static struct i2c_algorithm i2c_davinci_algo = { .functionality = i2c_davinci_func, }; +static const struct of_device_id davinci_i2c_of_match[] = { + {.compatible = "ti,davinci-i2c", }, + {}, +}; +MODULE_DEVICE_TABLE(of, davinci_i2c_of_match); + static int davinci_i2c_probe(struct platform_device *pdev) { struct davinci_i2c_dev *dev; @@ -674,8 +678,27 @@ static int davinci_i2c_probe(struct platform_device *pdev) #endif dev->dev = get_device(&pdev->dev); dev->irq = irq->start; + dev->pdata = dev->dev->platform_data; platform_set_drvdata(pdev, dev); + if (!dev->pdata && pdev->dev.of_node) { + u32 prop; + + dev->pdata = devm_kzalloc(&pdev->dev, + sizeof(struct davinci_i2c_platform_data), GFP_KERNEL); + if (!dev->pdata) { + r = -ENOMEM; + goto err_free_mem; + } + memcpy(dev->pdata, &davinci_i2c_platform_data_default, + sizeof(struct davinci_i2c_platform_data)); + if (!of_property_read_u32(pdev->dev.of_node, "clock-frequency", + &prop)) + dev->pdata->bus_freq = prop / 1000; + } else if (!dev->pdata) { + dev->pdata = &davinci_i2c_platform_data_default; + } + dev->clk = clk_get(&pdev->dev, NULL); if (IS_ERR(dev->clk)) { r = -ENODEV; @@ -711,6 +734,7 @@ static int davinci_i2c_probe(struct platform_device *pdev) adap->algo = &i2c_davinci_algo; adap->dev.parent = &pdev->dev; adap->timeout = DAVINCI_I2C_TIMEOUT; + adap->dev.of_node = pdev->dev.of_node; adap->nr = pdev->id; r = i2c_add_numbered_adapter(adap); @@ -718,6 +742,7 @@ static int davinci_i2c_probe(struct platform_device *pdev) dev_err(&pdev->dev, "failure adding adapter\n"); goto err_free_irq; } + of_i2c_register_devices(adap); return 0; @@ -809,6 +834,7 @@ static struct platform_driver davinci_i2c_driver = { .name = "i2c_davinci", .owner = THIS_MODULE, .pm = davinci_i2c_pm_ops, + .of_match_table = of_match_ptr(davinci_i2c_of_match), }, }; -- cgit v0.10.2 From e89cec7ff86febe51eff001c0bf2c81ce601cfe4 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Tue, 21 Aug 2012 10:45:09 +0200 Subject: i2c: nomadik: stop fetching the regulator The regulator fetched by the Nomadik I2C driver is actually a voltage domain regulator. Stop doing this in the driver and let the power domain code handle any regulators, as discussed on the list. Cc: Mark Brown Signed-off-by: Linus Walleij Signed-off-by: Wolfram Sang diff --git a/drivers/i2c/busses/i2c-nomadik.c b/drivers/i2c/busses/i2c-nomadik.c index 61b00ed..1b898b6 100644 --- a/drivers/i2c/busses/i2c-nomadik.c +++ b/drivers/i2c/busses/i2c-nomadik.c @@ -22,7 +22,6 @@ #include #include #include -#include #include #include @@ -146,7 +145,6 @@ struct i2c_nmk_client { * @stop: stop condition. * @xfer_complete: acknowledge completion for a I2C message. * @result: controller propogated result. - * @regulator: pointer to i2c regulator. * @busy: Busy doing transfer. */ struct nmk_i2c_dev { @@ -160,7 +158,6 @@ struct nmk_i2c_dev { int stop; struct completion xfer_complete; int result; - struct regulator *regulator; bool busy; }; @@ -643,8 +640,6 @@ static int nmk_i2c_xfer(struct i2c_adapter *i2c_adap, dev->busy = true; - if (dev->regulator) - regulator_enable(dev->regulator); pm_runtime_get_sync(&dev->adev->dev); clk_enable(dev->clk); @@ -676,8 +671,6 @@ static int nmk_i2c_xfer(struct i2c_adapter *i2c_adap, out: clk_disable(dev->clk); pm_runtime_put_sync(&dev->adev->dev); - if (dev->regulator) - regulator_disable(dev->regulator); dev->busy = false; @@ -957,12 +950,6 @@ static int nmk_i2c_probe(struct amba_device *adev, const struct amba_id *id) goto err_irq; } - dev->regulator = regulator_get(&adev->dev, "v-i2c"); - if (IS_ERR(dev->regulator)) { - dev_warn(&adev->dev, "could not get i2c regulator\n"); - dev->regulator = NULL; - } - pm_suspend_ignore_children(&adev->dev, true); dev->clk = clk_get(&adev->dev, NULL); @@ -1009,8 +996,6 @@ static int nmk_i2c_probe(struct amba_device *adev, const struct amba_id *id) err_add_adap: clk_put(dev->clk); err_no_clk: - if (dev->regulator) - regulator_put(dev->regulator); free_irq(dev->irq, dev); err_irq: iounmap(dev->virtbase); @@ -1038,8 +1023,6 @@ static int nmk_i2c_remove(struct amba_device *adev) if (res) release_mem_region(res->start, resource_size(res)); clk_put(dev->clk); - if (dev->regulator) - regulator_put(dev->regulator); pm_runtime_disable(&adev->dev); amba_set_drvdata(adev, NULL); kfree(dev); -- cgit v0.10.2 From af2a5f09fb6d317a0ec4b5026cd50f0b49a60419 Mon Sep 17 00:00:00 2001 From: Nikolaus Voss Date: Tue, 8 Nov 2011 12:09:30 +0100 Subject: Replace clk_lookup.con_id with clk_lookup.dev_id entries for twi clk The old driver used con_id clock entries. Convert to use dev_id for clock lookup via standard method. Signed-off-by: Nikolaus Voss Tested-by: Ludovic Desroches Reviewed-by: Nicolas Ferre Signed-off-by: Wolfram Sang diff --git a/arch/arm/mach-at91/at91rm9200.c b/arch/arm/mach-at91/at91rm9200.c index 6f50c67..f2112f9c 100644 --- a/arch/arm/mach-at91/at91rm9200.c +++ b/arch/arm/mach-at91/at91rm9200.c @@ -187,6 +187,7 @@ static struct clk_lookup periph_clocks_lookups[] = { CLKDEV_CON_DEV_ID("pclk", "ssc.0", &ssc0_clk), CLKDEV_CON_DEV_ID("pclk", "ssc.1", &ssc1_clk), CLKDEV_CON_DEV_ID("pclk", "ssc.2", &ssc2_clk), + CLKDEV_CON_DEV_ID(NULL, "at91_i2c", &twi_clk), /* fake hclk clock */ CLKDEV_CON_DEV_ID("hclk", "at91_ohci", &ohci_clk), CLKDEV_CON_ID("pioA", &pioA_clk), diff --git a/arch/arm/mach-at91/at91sam9260.c b/arch/arm/mach-at91/at91sam9260.c index 30c7f26..57c79ee 100644 --- a/arch/arm/mach-at91/at91sam9260.c +++ b/arch/arm/mach-at91/at91sam9260.c @@ -211,6 +211,7 @@ static struct clk_lookup periph_clocks_lookups[] = { CLKDEV_CON_DEV_ID("t1_clk", "atmel_tcb.1", &tc4_clk), CLKDEV_CON_DEV_ID("t2_clk", "atmel_tcb.1", &tc5_clk), CLKDEV_CON_DEV_ID("pclk", "ssc.0", &ssc_clk), + CLKDEV_CON_DEV_ID(NULL, "at91_i2c", &twi_clk), /* more usart lookup table for DT entries */ CLKDEV_CON_DEV_ID("usart", "fffff200.serial", &mck), CLKDEV_CON_DEV_ID("usart", "fffb0000.serial", &usart0_clk), diff --git a/arch/arm/mach-at91/at91sam9261.c b/arch/arm/mach-at91/at91sam9261.c index f40762c..71ca1e0 100644 --- a/arch/arm/mach-at91/at91sam9261.c +++ b/arch/arm/mach-at91/at91sam9261.c @@ -178,6 +178,7 @@ static struct clk_lookup periph_clocks_lookups[] = { CLKDEV_CON_DEV_ID("pclk", "ssc.1", &ssc1_clk), CLKDEV_CON_DEV_ID("pclk", "ssc.2", &ssc2_clk), CLKDEV_CON_DEV_ID("hclk", "at91_ohci", &hck0), + CLKDEV_CON_DEV_ID(NULL, "at91_i2c", &twi_clk), CLKDEV_CON_ID("pioA", &pioA_clk), CLKDEV_CON_ID("pioB", &pioB_clk), CLKDEV_CON_ID("pioC", &pioC_clk), diff --git a/arch/arm/mach-at91/at91sam9263.c b/arch/arm/mach-at91/at91sam9263.c index 84b3810..2a08305 100644 --- a/arch/arm/mach-at91/at91sam9263.c +++ b/arch/arm/mach-at91/at91sam9263.c @@ -193,6 +193,7 @@ static struct clk_lookup periph_clocks_lookups[] = { CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.0", &spi0_clk), CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.1", &spi1_clk), CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0", &tcb_clk), + CLKDEV_CON_DEV_ID(NULL, "at91_i2c", &twi_clk), /* fake hclk clock */ CLKDEV_CON_DEV_ID("hclk", "at91_ohci", &ohci_clk), CLKDEV_CON_ID("pioA", &pioA_clk), diff --git a/arch/arm/mach-at91/at91sam9g45.c b/arch/arm/mach-at91/at91sam9g45.c index ef6cedd..ddf3d37 100644 --- a/arch/arm/mach-at91/at91sam9g45.c +++ b/arch/arm/mach-at91/at91sam9g45.c @@ -237,6 +237,8 @@ static struct clk_lookup periph_clocks_lookups[] = { CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.1", &spi1_clk), CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0", &tcb0_clk), CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.1", &tcb0_clk), + CLKDEV_CON_DEV_ID(NULL, "at91_i2c.0", &twi0_clk), + CLKDEV_CON_DEV_ID(NULL, "at91_i2c.1", &twi1_clk), CLKDEV_CON_DEV_ID("pclk", "ssc.0", &ssc0_clk), CLKDEV_CON_DEV_ID("pclk", "ssc.1", &ssc1_clk), CLKDEV_CON_DEV_ID(NULL, "atmel-trng", &trng_clk), diff --git a/arch/arm/mach-at91/at91sam9rl.c b/arch/arm/mach-at91/at91sam9rl.c index 72ce50a..bf79c1f 100644 --- a/arch/arm/mach-at91/at91sam9rl.c +++ b/arch/arm/mach-at91/at91sam9rl.c @@ -186,6 +186,8 @@ static struct clk_lookup periph_clocks_lookups[] = { CLKDEV_CON_DEV_ID("t2_clk", "atmel_tcb.0", &tc2_clk), CLKDEV_CON_DEV_ID("pclk", "ssc.0", &ssc0_clk), CLKDEV_CON_DEV_ID("pclk", "ssc.1", &ssc1_clk), + CLKDEV_CON_DEV_ID(NULL, "at91_i2c.0", &twi0_clk), + CLKDEV_CON_DEV_ID(NULL, "at91_i2c.1", &twi1_clk), CLKDEV_CON_ID("pioA", &pioA_clk), CLKDEV_CON_ID("pioB", &pioB_clk), CLKDEV_CON_ID("pioC", &pioC_clk), diff --git a/arch/arm/mach-at91/at91sam9x5.c b/arch/arm/mach-at91/at91sam9x5.c index 477cf9d..4bad4a2 100644 --- a/arch/arm/mach-at91/at91sam9x5.c +++ b/arch/arm/mach-at91/at91sam9x5.c @@ -231,6 +231,9 @@ static struct clk_lookup periph_clocks_lookups[] = { CLKDEV_CON_DEV_ID("t0_clk", "f800c000.timer", &tcb0_clk), CLKDEV_CON_DEV_ID("dma_clk", "ffffec00.dma-controller", &dma0_clk), CLKDEV_CON_DEV_ID("dma_clk", "ffffee00.dma-controller", &dma1_clk), + CLKDEV_CON_DEV_ID(NULL, "at91_i2c.0", &twi0_clk), + CLKDEV_CON_DEV_ID(NULL, "at91_i2c.1", &twi1_clk), + CLKDEV_CON_DEV_ID(NULL, "at91_i2c.2", &twi2_clk), CLKDEV_CON_ID("pioA", &pioAB_clk), CLKDEV_CON_ID("pioB", &pioAB_clk), CLKDEV_CON_ID("pioC", &pioCD_clk), -- cgit v0.10.2 From a879e9c34b93ee43f5caa7f94eb17e7af4f6ef50 Mon Sep 17 00:00:00 2001 From: Nikolaus Voss Date: Tue, 8 Nov 2011 11:49:24 +0100 Subject: i2c: at91: remove old polling driver It will get replaced by a superior one. Safe to remove since this one depends on BROKEN anyhow. Signed-off-by: Nikolaus Voss Tested-by: Ludovic Desroches Reviewed-by: Nicolas Ferre [wsa: added commit message] Signed-off-by: Wolfram Sang diff --git a/arch/arm/mach-at91/include/mach/at91_twi.h b/arch/arm/mach-at91/include/mach/at91_twi.h deleted file mode 100644 index bb2880f..0000000 --- a/arch/arm/mach-at91/include/mach/at91_twi.h +++ /dev/null @@ -1,68 +0,0 @@ -/* - * arch/arm/mach-at91/include/mach/at91_twi.h - * - * Copyright (C) 2005 Ivan Kokshaysky - * Copyright (C) SAN People - * - * Two-wire Interface (TWI) registers. - * Based on AT91RM9200 datasheet revision E. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#ifndef AT91_TWI_H -#define AT91_TWI_H - -#define AT91_TWI_CR 0x00 /* Control Register */ -#define AT91_TWI_START (1 << 0) /* Send a Start Condition */ -#define AT91_TWI_STOP (1 << 1) /* Send a Stop Condition */ -#define AT91_TWI_MSEN (1 << 2) /* Master Transfer Enable */ -#define AT91_TWI_MSDIS (1 << 3) /* Master Transfer Disable */ -#define AT91_TWI_SVEN (1 << 4) /* Slave Transfer Enable [SAM9260 only] */ -#define AT91_TWI_SVDIS (1 << 5) /* Slave Transfer Disable [SAM9260 only] */ -#define AT91_TWI_SWRST (1 << 7) /* Software Reset */ - -#define AT91_TWI_MMR 0x04 /* Master Mode Register */ -#define AT91_TWI_IADRSZ (3 << 8) /* Internal Device Address Size */ -#define AT91_TWI_IADRSZ_NO (0 << 8) -#define AT91_TWI_IADRSZ_1 (1 << 8) -#define AT91_TWI_IADRSZ_2 (2 << 8) -#define AT91_TWI_IADRSZ_3 (3 << 8) -#define AT91_TWI_MREAD (1 << 12) /* Master Read Direction */ -#define AT91_TWI_DADR (0x7f << 16) /* Device Address */ - -#define AT91_TWI_SMR 0x08 /* Slave Mode Register [SAM9260 only] */ -#define AT91_TWI_SADR (0x7f << 16) /* Slave Address */ - -#define AT91_TWI_IADR 0x0c /* Internal Address Register */ - -#define AT91_TWI_CWGR 0x10 /* Clock Waveform Generator Register */ -#define AT91_TWI_CLDIV (0xff << 0) /* Clock Low Divisor */ -#define AT91_TWI_CHDIV (0xff << 8) /* Clock High Divisor */ -#define AT91_TWI_CKDIV (7 << 16) /* Clock Divider */ - -#define AT91_TWI_SR 0x20 /* Status Register */ -#define AT91_TWI_TXCOMP (1 << 0) /* Transmission Complete */ -#define AT91_TWI_RXRDY (1 << 1) /* Receive Holding Register Ready */ -#define AT91_TWI_TXRDY (1 << 2) /* Transmit Holding Register Ready */ -#define AT91_TWI_SVREAD (1 << 3) /* Slave Read [SAM9260 only] */ -#define AT91_TWI_SVACC (1 << 4) /* Slave Access [SAM9260 only] */ -#define AT91_TWI_GACC (1 << 5) /* General Call Access [SAM9260 only] */ -#define AT91_TWI_OVRE (1 << 6) /* Overrun Error [AT91RM9200 only] */ -#define AT91_TWI_UNRE (1 << 7) /* Underrun Error [AT91RM9200 only] */ -#define AT91_TWI_NACK (1 << 8) /* Not Acknowledged */ -#define AT91_TWI_ARBLST (1 << 9) /* Arbitration Lost [SAM9260 only] */ -#define AT91_TWI_SCLWS (1 << 10) /* Clock Wait State [SAM9260 only] */ -#define AT91_TWI_EOSACC (1 << 11) /* End of Slave Address [SAM9260 only] */ - -#define AT91_TWI_IER 0x24 /* Interrupt Enable Register */ -#define AT91_TWI_IDR 0x28 /* Interrupt Disable Register */ -#define AT91_TWI_IMR 0x2c /* Interrupt Mask Register */ -#define AT91_TWI_RHR 0x30 /* Receive Holding Register */ -#define AT91_TWI_THR 0x34 /* Transmit Holding Register */ - -#endif - diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile index ce3c2be..4f46873 100644 --- a/drivers/i2c/busses/Makefile +++ b/drivers/i2c/busses/Makefile @@ -28,7 +28,6 @@ obj-$(CONFIG_I2C_HYDRA) += i2c-hydra.o obj-$(CONFIG_I2C_POWERMAC) += i2c-powermac.o # Embedded system I2C/SMBus host controller drivers -obj-$(CONFIG_I2C_AT91) += i2c-at91.o obj-$(CONFIG_I2C_AU1550) += i2c-au1550.o obj-$(CONFIG_I2C_BLACKFIN_TWI) += i2c-bfin-twi.o obj-$(CONFIG_I2C_CPM) += i2c-cpm.o diff --git a/drivers/i2c/busses/i2c-at91.c b/drivers/i2c/busses/i2c-at91.c deleted file mode 100644 index e24484b..0000000 --- a/drivers/i2c/busses/i2c-at91.c +++ /dev/null @@ -1,315 +0,0 @@ -/* - i2c Support for Atmel's AT91 Two-Wire Interface (TWI) - - Copyright (C) 2004 Rick Bronson - Converted to 2.6 by Andrew Victor - - Borrowed heavily from original work by: - Copyright (C) 2000 Philip Edelbrock - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. -*/ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include - -#define TWI_CLOCK 100000 /* Hz. max 400 Kbits/sec */ - - -static struct clk *twi_clk; -static void __iomem *twi_base; - -#define at91_twi_read(reg) __raw_readl(twi_base + (reg)) -#define at91_twi_write(reg, val) __raw_writel((val), twi_base + (reg)) - - -/* - * Initialize the TWI hardware registers. - */ -static void __devinit at91_twi_hwinit(void) -{ - unsigned long cdiv, ckdiv; - - at91_twi_write(AT91_TWI_IDR, 0xffffffff); /* Disable all interrupts */ - at91_twi_write(AT91_TWI_CR, AT91_TWI_SWRST); /* Reset peripheral */ - at91_twi_write(AT91_TWI_CR, AT91_TWI_MSEN); /* Set Master mode */ - - /* Calcuate clock dividers */ - cdiv = (clk_get_rate(twi_clk) / (2 * TWI_CLOCK)) - 3; - cdiv = cdiv + 1; /* round up */ - ckdiv = 0; - while (cdiv > 255) { - ckdiv++; - cdiv = cdiv >> 1; - } - - if (cpu_is_at91rm9200()) { /* AT91RM9200 Errata #22 */ - if (ckdiv > 5) { - printk(KERN_ERR "AT91 I2C: Invalid TWI_CLOCK value!\n"); - ckdiv = 5; - } - } - - at91_twi_write(AT91_TWI_CWGR, (ckdiv << 16) | (cdiv << 8) | cdiv); -} - -/* - * Poll the i2c status register until the specified bit is set. - * Returns 0 if timed out (100 msec). - */ -static short at91_poll_status(unsigned long bit) -{ - int loop_cntr = 10000; - - do { - udelay(10); - } while (!(at91_twi_read(AT91_TWI_SR) & bit) && (--loop_cntr > 0)); - - return (loop_cntr > 0); -} - -static int xfer_read(struct i2c_adapter *adap, unsigned char *buf, int length) -{ - /* Send Start */ - at91_twi_write(AT91_TWI_CR, AT91_TWI_START); - - /* Read data */ - while (length--) { - if (!length) /* need to send Stop before reading last byte */ - at91_twi_write(AT91_TWI_CR, AT91_TWI_STOP); - if (!at91_poll_status(AT91_TWI_RXRDY)) { - dev_dbg(&adap->dev, "RXRDY timeout\n"); - return -ETIMEDOUT; - } - *buf++ = (at91_twi_read(AT91_TWI_RHR) & 0xff); - } - - return 0; -} - -static int xfer_write(struct i2c_adapter *adap, unsigned char *buf, int length) -{ - /* Load first byte into transmitter */ - at91_twi_write(AT91_TWI_THR, *buf++); - - /* Send Start */ - at91_twi_write(AT91_TWI_CR, AT91_TWI_START); - - do { - if (!at91_poll_status(AT91_TWI_TXRDY)) { - dev_dbg(&adap->dev, "TXRDY timeout\n"); - return -ETIMEDOUT; - } - - length--; /* byte was transmitted */ - - if (length > 0) /* more data to send? */ - at91_twi_write(AT91_TWI_THR, *buf++); - } while (length); - - /* Send Stop */ - at91_twi_write(AT91_TWI_CR, AT91_TWI_STOP); - - return 0; -} - -/* - * Generic i2c master transfer entrypoint. - * - * Note: We do not use Atmel's feature of storing the "internal device address". - * Instead the "internal device address" has to be written using a separate - * i2c message. - * http://lists.arm.linux.org.uk/pipermail/linux-arm-kernel/2004-September/024411.html - */ -static int at91_xfer(struct i2c_adapter *adap, struct i2c_msg *pmsg, int num) -{ - int i, ret; - - dev_dbg(&adap->dev, "at91_xfer: processing %d messages:\n", num); - - for (i = 0; i < num; i++) { - dev_dbg(&adap->dev, " #%d: %sing %d byte%s %s 0x%02x\n", i, - pmsg->flags & I2C_M_RD ? "read" : "writ", - pmsg->len, pmsg->len > 1 ? "s" : "", - pmsg->flags & I2C_M_RD ? "from" : "to", pmsg->addr); - - at91_twi_write(AT91_TWI_MMR, (pmsg->addr << 16) - | ((pmsg->flags & I2C_M_RD) ? AT91_TWI_MREAD : 0)); - - if (pmsg->len && pmsg->buf) { /* sanity check */ - if (pmsg->flags & I2C_M_RD) - ret = xfer_read(adap, pmsg->buf, pmsg->len); - else - ret = xfer_write(adap, pmsg->buf, pmsg->len); - - if (ret) - return ret; - - /* Wait until transfer is finished */ - if (!at91_poll_status(AT91_TWI_TXCOMP)) { - dev_dbg(&adap->dev, "TXCOMP timeout\n"); - return -ETIMEDOUT; - } - } - dev_dbg(&adap->dev, "transfer complete\n"); - pmsg++; /* next message */ - } - return i; -} - -/* - * Return list of supported functionality. - */ -static u32 at91_func(struct i2c_adapter *adapter) -{ - return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL; -} - -static struct i2c_algorithm at91_algorithm = { - .master_xfer = at91_xfer, - .functionality = at91_func, -}; - -/* - * Main initialization routine. - */ -static int __devinit at91_i2c_probe(struct platform_device *pdev) -{ - struct i2c_adapter *adapter; - struct resource *res; - int rc; - - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!res) - return -ENXIO; - - if (!request_mem_region(res->start, resource_size(res), "at91_i2c")) - return -EBUSY; - - twi_base = ioremap(res->start, resource_size(res)); - if (!twi_base) { - rc = -ENOMEM; - goto fail0; - } - - twi_clk = clk_get(NULL, "twi_clk"); - if (IS_ERR(twi_clk)) { - dev_err(&pdev->dev, "no clock defined\n"); - rc = -ENODEV; - goto fail1; - } - - adapter = kzalloc(sizeof(struct i2c_adapter), GFP_KERNEL); - if (adapter == NULL) { - dev_err(&pdev->dev, "can't allocate inteface!\n"); - rc = -ENOMEM; - goto fail2; - } - snprintf(adapter->name, sizeof(adapter->name), "AT91"); - adapter->algo = &at91_algorithm; - adapter->class = I2C_CLASS_HWMON; - adapter->dev.parent = &pdev->dev; - /* adapter->id == 0 ... only one TWI controller for now */ - - platform_set_drvdata(pdev, adapter); - - clk_enable(twi_clk); /* enable peripheral clock */ - at91_twi_hwinit(); /* initialize TWI controller */ - - rc = i2c_add_numbered_adapter(adapter); - if (rc) { - dev_err(&pdev->dev, "Adapter %s registration failed\n", - adapter->name); - goto fail3; - } - - dev_info(&pdev->dev, "AT91 i2c bus driver.\n"); - return 0; - -fail3: - platform_set_drvdata(pdev, NULL); - kfree(adapter); - clk_disable(twi_clk); -fail2: - clk_put(twi_clk); -fail1: - iounmap(twi_base); -fail0: - release_mem_region(res->start, resource_size(res)); - - return rc; -} - -static int __devexit at91_i2c_remove(struct platform_device *pdev) -{ - struct i2c_adapter *adapter = platform_get_drvdata(pdev); - struct resource *res; - int rc; - - rc = i2c_del_adapter(adapter); - platform_set_drvdata(pdev, NULL); - - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - iounmap(twi_base); - release_mem_region(res->start, resource_size(res)); - - clk_disable(twi_clk); /* disable peripheral clock */ - clk_put(twi_clk); - - return rc; -} - -#ifdef CONFIG_PM - -/* NOTE: could save a few mA by keeping clock off outside of at91_xfer... */ - -static int at91_i2c_suspend(struct device *dev) -{ - clk_disable(twi_clk); - return 0; -} - -static int at91_i2c_resume(struct device *dev) -{ - return clk_enable(twi_clk); -} - -static SIMPLE_DEV_PM_OPS(at91_i2c_pm, at91_i2c_suspend, at91_i2c_resume); -#define AT91_I2C_PM (&at91_i2c_pm) - -#else -#define AT91_I2C_PM NULL -#endif - -static struct platform_driver at91_i2c_driver = { - .probe = at91_i2c_probe, - .remove = __devexit_p(at91_i2c_remove), - .driver = { - .name = "at91_i2c", - .owner = THIS_MODULE, - .pm = AT91_I2C_PM, - }, -}; - -module_platform_driver(at91_i2c_driver); - -MODULE_AUTHOR("Rick Bronson"); -MODULE_DESCRIPTION("I2C (TWI) driver for Atmel AT91"); -MODULE_LICENSE("GPL"); -MODULE_ALIAS("platform:at91_i2c"); -- cgit v0.10.2 From fac368a040484293006bb488e67972aafcf88ec7 Mon Sep 17 00:00:00 2001 From: Nikolaus Voss Date: Tue, 8 Nov 2011 11:49:46 +0100 Subject: i2c: at91: add new driver This driver has the following properties compared to the old driver: 1. Support for multiple interfaces. 2. Interrupt driven I/O as opposed to polling/busy waiting. 3. Support for _one_ repeated start (Sr) condition, which is enough for most real-world applications including all SMBus transfer types. (The hardware does not support issuing arbitrary Sr conditions on the bus.) testing: SoC: at91sam9g45 - BQ20Z80 battery SMBus client. - on a 2.6.38 kernel with several i2c clients (temp-sensor, audio-codec, touchscreen-controller, w1-bridge, io-expanders) Signed-off-by: Nikolaus Voss Reviewed-by: Felipe Balbi Tested-by: Hubert Feurstein Tested-by: Ludovic Desroches Reviewed-by: Nicolas Ferre [wsa: squashed with the following patches from Ludovic to have some flaws fixed: i2c: at91: use managed resources i2c: at91: add warning about transmission issues for some devices i2c: at91: use an id table for SoC dependent parameters ] Signed-off-by: Ludovic Desroches Signed-off-by: Wolfram Sang diff --git a/arch/arm/mach-at91/at91rm9200.c b/arch/arm/mach-at91/at91rm9200.c index f2112f9c..b4f0565 100644 --- a/arch/arm/mach-at91/at91rm9200.c +++ b/arch/arm/mach-at91/at91rm9200.c @@ -187,7 +187,7 @@ static struct clk_lookup periph_clocks_lookups[] = { CLKDEV_CON_DEV_ID("pclk", "ssc.0", &ssc0_clk), CLKDEV_CON_DEV_ID("pclk", "ssc.1", &ssc1_clk), CLKDEV_CON_DEV_ID("pclk", "ssc.2", &ssc2_clk), - CLKDEV_CON_DEV_ID(NULL, "at91_i2c", &twi_clk), + CLKDEV_CON_DEV_ID(NULL, "i2c-at91rm9200", &twi_clk), /* fake hclk clock */ CLKDEV_CON_DEV_ID("hclk", "at91_ohci", &ohci_clk), CLKDEV_CON_ID("pioA", &pioA_clk), diff --git a/arch/arm/mach-at91/at91rm9200_devices.c b/arch/arm/mach-at91/at91rm9200_devices.c index 01fb732..0b972f2 100644 --- a/arch/arm/mach-at91/at91rm9200_devices.c +++ b/arch/arm/mach-at91/at91rm9200_devices.c @@ -495,7 +495,7 @@ static struct resource twi_resources[] = { }; static struct platform_device at91rm9200_twi_device = { - .name = "at91_i2c", + .name = "i2c-at91rm9200", .id = -1, .resource = twi_resources, .num_resources = ARRAY_SIZE(twi_resources), diff --git a/arch/arm/mach-at91/at91sam9260.c b/arch/arm/mach-at91/at91sam9260.c index 57c79ee..5bd19a4 100644 --- a/arch/arm/mach-at91/at91sam9260.c +++ b/arch/arm/mach-at91/at91sam9260.c @@ -211,7 +211,8 @@ static struct clk_lookup periph_clocks_lookups[] = { CLKDEV_CON_DEV_ID("t1_clk", "atmel_tcb.1", &tc4_clk), CLKDEV_CON_DEV_ID("t2_clk", "atmel_tcb.1", &tc5_clk), CLKDEV_CON_DEV_ID("pclk", "ssc.0", &ssc_clk), - CLKDEV_CON_DEV_ID(NULL, "at91_i2c", &twi_clk), + CLKDEV_CON_DEV_ID(NULL, "i2c-at91sam9260", &twi_clk), + CLKDEV_CON_DEV_ID(NULL, "i2c-at91sam9g20", &twi_clk), /* more usart lookup table for DT entries */ CLKDEV_CON_DEV_ID("usart", "fffff200.serial", &mck), CLKDEV_CON_DEV_ID("usart", "fffb0000.serial", &usart0_clk), diff --git a/arch/arm/mach-at91/at91sam9260_devices.c b/arch/arm/mach-at91/at91sam9260_devices.c index bce572a..95fc23a 100644 --- a/arch/arm/mach-at91/at91sam9260_devices.c +++ b/arch/arm/mach-at91/at91sam9260_devices.c @@ -503,7 +503,6 @@ static struct resource twi_resources[] = { }; static struct platform_device at91sam9260_twi_device = { - .name = "at91_i2c", .id = -1, .resource = twi_resources, .num_resources = ARRAY_SIZE(twi_resources), @@ -511,6 +510,13 @@ static struct platform_device at91sam9260_twi_device = { void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices) { + /* IP version is not the same on 9260 and g20 */ + if (cpu_is_at91sam9g20()) { + at91sam9260_twi_device.name = "i2c-at91sam9g20"; + } else { + at91sam9260_twi_device.name = "i2c-at91sam9260"; + } + /* pins used for TWI interface */ at91_set_A_periph(AT91_PIN_PA23, 0); /* TWD */ at91_set_multi_drive(AT91_PIN_PA23, 1); diff --git a/arch/arm/mach-at91/at91sam9261.c b/arch/arm/mach-at91/at91sam9261.c index 71ca1e0..8d999eb 100644 --- a/arch/arm/mach-at91/at91sam9261.c +++ b/arch/arm/mach-at91/at91sam9261.c @@ -178,7 +178,8 @@ static struct clk_lookup periph_clocks_lookups[] = { CLKDEV_CON_DEV_ID("pclk", "ssc.1", &ssc1_clk), CLKDEV_CON_DEV_ID("pclk", "ssc.2", &ssc2_clk), CLKDEV_CON_DEV_ID("hclk", "at91_ohci", &hck0), - CLKDEV_CON_DEV_ID(NULL, "at91_i2c", &twi_clk), + CLKDEV_CON_DEV_ID(NULL, "i2c-at91sam9261", &twi_clk), + CLKDEV_CON_DEV_ID(NULL, "i2c-at91sam9g10", &twi_clk), CLKDEV_CON_ID("pioA", &pioA_clk), CLKDEV_CON_ID("pioB", &pioB_clk), CLKDEV_CON_ID("pioC", &pioC_clk), diff --git a/arch/arm/mach-at91/at91sam9261_devices.c b/arch/arm/mach-at91/at91sam9261_devices.c index bc2590d..29188ef 100644 --- a/arch/arm/mach-at91/at91sam9261_devices.c +++ b/arch/arm/mach-at91/at91sam9261_devices.c @@ -317,7 +317,6 @@ static struct resource twi_resources[] = { }; static struct platform_device at91sam9261_twi_device = { - .name = "at91_i2c", .id = -1, .resource = twi_resources, .num_resources = ARRAY_SIZE(twi_resources), @@ -325,6 +324,13 @@ static struct platform_device at91sam9261_twi_device = { void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices) { + /* IP version is not the same on 9261 and g10 */ + if (cpu_is_at91sam9g10()) { + at91sam9261_twi_device.name = "i2c-at91sam9g10"; + } else { + at91sam9261_twi_device.name = "i2c-at91sam9261"; + } + /* pins used for TWI interface */ at91_set_A_periph(AT91_PIN_PA7, 0); /* TWD */ at91_set_multi_drive(AT91_PIN_PA7, 1); diff --git a/arch/arm/mach-at91/at91sam9263.c b/arch/arm/mach-at91/at91sam9263.c index 2a08305..e6b5956 100644 --- a/arch/arm/mach-at91/at91sam9263.c +++ b/arch/arm/mach-at91/at91sam9263.c @@ -193,7 +193,7 @@ static struct clk_lookup periph_clocks_lookups[] = { CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.0", &spi0_clk), CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.1", &spi1_clk), CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0", &tcb_clk), - CLKDEV_CON_DEV_ID(NULL, "at91_i2c", &twi_clk), + CLKDEV_CON_DEV_ID(NULL, "i2c-at91sam9260", &twi_clk), /* fake hclk clock */ CLKDEV_CON_DEV_ID("hclk", "at91_ohci", &ohci_clk), CLKDEV_CON_ID("pioA", &pioA_clk), diff --git a/arch/arm/mach-at91/at91sam9263_devices.c b/arch/arm/mach-at91/at91sam9263_devices.c index 9b6ca73..3f5288e 100644 --- a/arch/arm/mach-at91/at91sam9263_devices.c +++ b/arch/arm/mach-at91/at91sam9263_devices.c @@ -574,7 +574,7 @@ static struct resource twi_resources[] = { }; static struct platform_device at91sam9263_twi_device = { - .name = "at91_i2c", + .name = "i2c-at91sam9260", .id = -1, .resource = twi_resources, .num_resources = ARRAY_SIZE(twi_resources), diff --git a/arch/arm/mach-at91/at91sam9g45.c b/arch/arm/mach-at91/at91sam9g45.c index ddf3d37..858f032 100644 --- a/arch/arm/mach-at91/at91sam9g45.c +++ b/arch/arm/mach-at91/at91sam9g45.c @@ -237,8 +237,8 @@ static struct clk_lookup periph_clocks_lookups[] = { CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.1", &spi1_clk), CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0", &tcb0_clk), CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.1", &tcb0_clk), - CLKDEV_CON_DEV_ID(NULL, "at91_i2c.0", &twi0_clk), - CLKDEV_CON_DEV_ID(NULL, "at91_i2c.1", &twi1_clk), + CLKDEV_CON_DEV_ID(NULL, "i2c-at91sam9g10.0", &twi0_clk), + CLKDEV_CON_DEV_ID(NULL, "i2c-at91sam9g10.1", &twi1_clk), CLKDEV_CON_DEV_ID("pclk", "ssc.0", &ssc0_clk), CLKDEV_CON_DEV_ID("pclk", "ssc.1", &ssc1_clk), CLKDEV_CON_DEV_ID(NULL, "atmel-trng", &trng_clk), diff --git a/arch/arm/mach-at91/at91sam9g45_devices.c b/arch/arm/mach-at91/at91sam9g45_devices.c index 1b47319..ac1b0f8 100644 --- a/arch/arm/mach-at91/at91sam9g45_devices.c +++ b/arch/arm/mach-at91/at91sam9g45_devices.c @@ -653,7 +653,7 @@ static struct resource twi0_resources[] = { }; static struct platform_device at91sam9g45_twi0_device = { - .name = "at91_i2c", + .name = "i2c-at91sam9g10", .id = 0, .resource = twi0_resources, .num_resources = ARRAY_SIZE(twi0_resources), @@ -673,7 +673,7 @@ static struct resource twi1_resources[] = { }; static struct platform_device at91sam9g45_twi1_device = { - .name = "at91_i2c", + .name = "i2c-at91sam9g10", .id = 1, .resource = twi1_resources, .num_resources = ARRAY_SIZE(twi1_resources), diff --git a/arch/arm/mach-at91/at91sam9rl.c b/arch/arm/mach-at91/at91sam9rl.c index bf79c1f..72e9084 100644 --- a/arch/arm/mach-at91/at91sam9rl.c +++ b/arch/arm/mach-at91/at91sam9rl.c @@ -186,8 +186,8 @@ static struct clk_lookup periph_clocks_lookups[] = { CLKDEV_CON_DEV_ID("t2_clk", "atmel_tcb.0", &tc2_clk), CLKDEV_CON_DEV_ID("pclk", "ssc.0", &ssc0_clk), CLKDEV_CON_DEV_ID("pclk", "ssc.1", &ssc1_clk), - CLKDEV_CON_DEV_ID(NULL, "at91_i2c.0", &twi0_clk), - CLKDEV_CON_DEV_ID(NULL, "at91_i2c.1", &twi1_clk), + CLKDEV_CON_DEV_ID(NULL, "i2c-at91sam9g20.0", &twi0_clk), + CLKDEV_CON_DEV_ID(NULL, "i2c-at91sam9g20.1", &twi1_clk), CLKDEV_CON_ID("pioA", &pioA_clk), CLKDEV_CON_ID("pioB", &pioB_clk), CLKDEV_CON_ID("pioC", &pioC_clk), diff --git a/arch/arm/mach-at91/at91sam9rl_devices.c b/arch/arm/mach-at91/at91sam9rl_devices.c index b3d365d..0794954 100644 --- a/arch/arm/mach-at91/at91sam9rl_devices.c +++ b/arch/arm/mach-at91/at91sam9rl_devices.c @@ -346,7 +346,7 @@ static struct resource twi_resources[] = { }; static struct platform_device at91sam9rl_twi_device = { - .name = "at91_i2c", + .name = "i2c-at91sam9g20", .id = -1, .resource = twi_resources, .num_resources = ARRAY_SIZE(twi_resources), diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig index b4aaa1b..da77c37 100644 --- a/drivers/i2c/busses/Kconfig +++ b/drivers/i2c/busses/Kconfig @@ -290,18 +290,21 @@ comment "I2C system bus drivers (mostly embedded / system-on-chip)" config I2C_AT91 tristate "Atmel AT91 I2C Two-Wire interface (TWI)" - depends on ARCH_AT91 && EXPERIMENTAL && BROKEN + depends on ARCH_AT91 && EXPERIMENTAL help This supports the use of the I2C interface on Atmel AT91 processors. - This driver is BROKEN because the controller which it uses - will easily trigger RX overrun and TX underrun errors. Using - low I2C clock rates may partially work around those issues - on some systems. Another serious problem is that there is no - documented way to issue repeated START conditions, as needed + A serious problem is that there is no documented way to issue + repeated START conditions for more than two messages, as needed to support combined I2C messages. Use the i2c-gpio driver - unless your system can cope with those limitations. + unless your system can cope with this limitation. + + Caution! at91rm9200, at91sam9261, at91sam9260, at91sam9263 devices + don't have clock stretching in transmission mode. For that reason, + you can encounter underrun issues causing premature stop sendings if + the latency to fill the transmission register is too long. If you + are facing this situation, use the i2c-gpio driver. config I2C_AU1550 tristate "Au1550/Au1200/Au1300 SMBus interface" diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile index 4f46873..ce3c2be 100644 --- a/drivers/i2c/busses/Makefile +++ b/drivers/i2c/busses/Makefile @@ -28,6 +28,7 @@ obj-$(CONFIG_I2C_HYDRA) += i2c-hydra.o obj-$(CONFIG_I2C_POWERMAC) += i2c-powermac.o # Embedded system I2C/SMBus host controller drivers +obj-$(CONFIG_I2C_AT91) += i2c-at91.o obj-$(CONFIG_I2C_AU1550) += i2c-au1550.o obj-$(CONFIG_I2C_BLACKFIN_TWI) += i2c-bfin-twi.o obj-$(CONFIG_I2C_CPM) += i2c-cpm.o diff --git a/drivers/i2c/busses/i2c-at91.c b/drivers/i2c/busses/i2c-at91.c new file mode 100644 index 0000000..78bcad0 --- /dev/null +++ b/drivers/i2c/busses/i2c-at91.c @@ -0,0 +1,505 @@ +/* + * i2c Support for Atmel's AT91 Two-Wire Interface (TWI) + * + * Copyright (C) 2011 Weinmann Medical GmbH + * Author: Nikolaus Voss + * + * Evolved from original work by: + * Copyright (C) 2004 Rick Bronson + * Converted to 2.6 by Andrew Victor + * + * Borrowed heavily from original work by: + * Copyright (C) 2000 Philip Edelbrock + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define TWI_CLK_HZ 100000 /* max 400 Kbits/s */ +#define AT91_I2C_TIMEOUT msecs_to_jiffies(100) /* transfer timeout */ + +/* AT91 TWI register definitions */ +#define AT91_TWI_CR 0x0000 /* Control Register */ +#define AT91_TWI_START 0x0001 /* Send a Start Condition */ +#define AT91_TWI_STOP 0x0002 /* Send a Stop Condition */ +#define AT91_TWI_MSEN 0x0004 /* Master Transfer Enable */ +#define AT91_TWI_SVDIS 0x0020 /* Slave Transfer Disable */ +#define AT91_TWI_SWRST 0x0080 /* Software Reset */ + +#define AT91_TWI_MMR 0x0004 /* Master Mode Register */ +#define AT91_TWI_IADRSZ_1 0x0100 /* Internal Device Address Size */ +#define AT91_TWI_MREAD 0x1000 /* Master Read Direction */ + +#define AT91_TWI_IADR 0x000c /* Internal Address Register */ + +#define AT91_TWI_CWGR 0x0010 /* Clock Waveform Generator Reg */ + +#define AT91_TWI_SR 0x0020 /* Status Register */ +#define AT91_TWI_TXCOMP 0x0001 /* Transmission Complete */ +#define AT91_TWI_RXRDY 0x0002 /* Receive Holding Register Ready */ +#define AT91_TWI_TXRDY 0x0004 /* Transmit Holding Register Ready */ + +#define AT91_TWI_OVRE 0x0040 /* Overrun Error */ +#define AT91_TWI_UNRE 0x0080 /* Underrun Error */ +#define AT91_TWI_NACK 0x0100 /* Not Acknowledged */ + +#define AT91_TWI_IER 0x0024 /* Interrupt Enable Register */ +#define AT91_TWI_IDR 0x0028 /* Interrupt Disable Register */ +#define AT91_TWI_IMR 0x002c /* Interrupt Mask Register */ +#define AT91_TWI_RHR 0x0030 /* Receive Holding Register */ +#define AT91_TWI_THR 0x0034 /* Transmit Holding Register */ + +struct at91_twi_pdata { + unsigned clk_max_div; + unsigned clk_offset; + bool has_unre_flag; +}; + +struct at91_twi_dev { + struct device *dev; + void __iomem *base; + struct completion cmd_complete; + struct clk *clk; + u8 *buf; + size_t buf_len; + struct i2c_msg *msg; + int irq; + unsigned transfer_status; + struct i2c_adapter adapter; + unsigned twi_cwgr_reg; + struct at91_twi_pdata *pdata; +}; + +static unsigned at91_twi_read(struct at91_twi_dev *dev, unsigned reg) +{ + return readl_relaxed(dev->base + reg); +} + +static void at91_twi_write(struct at91_twi_dev *dev, unsigned reg, unsigned val) +{ + writel_relaxed(val, dev->base + reg); +} + +static void at91_disable_twi_interrupts(struct at91_twi_dev *dev) +{ + at91_twi_write(dev, AT91_TWI_IDR, + AT91_TWI_TXCOMP | AT91_TWI_RXRDY | AT91_TWI_TXRDY); +} + +static void at91_init_twi_bus(struct at91_twi_dev *dev) +{ + at91_disable_twi_interrupts(dev); + at91_twi_write(dev, AT91_TWI_CR, AT91_TWI_SWRST); + at91_twi_write(dev, AT91_TWI_CR, AT91_TWI_MSEN); + at91_twi_write(dev, AT91_TWI_CR, AT91_TWI_SVDIS); + at91_twi_write(dev, AT91_TWI_CWGR, dev->twi_cwgr_reg); +} + +/* + * Calculate symmetric clock as stated in datasheet: + * twi_clk = F_MAIN / (2 * (cdiv * (1 << ckdiv) + offset)) + */ +static void __devinit at91_calc_twi_clock(struct at91_twi_dev *dev, int twi_clk) +{ + int ckdiv, cdiv, div; + struct at91_twi_pdata *pdata = dev->pdata; + int offset = pdata->clk_offset; + int max_ckdiv = pdata->clk_max_div; + + div = max(0, (int)DIV_ROUND_UP(clk_get_rate(dev->clk), + 2 * twi_clk) - offset); + ckdiv = fls(div >> 8); + cdiv = div >> ckdiv; + + if (ckdiv > max_ckdiv) { + dev_warn(dev->dev, "%d exceeds ckdiv max value which is %d.\n", + ckdiv, max_ckdiv); + ckdiv = max_ckdiv; + cdiv = 255; + } + + dev->twi_cwgr_reg = (ckdiv << 16) | (cdiv << 8) | cdiv; + dev_dbg(dev->dev, "cdiv %d ckdiv %d\n", cdiv, ckdiv); +} + +static void at91_twi_write_next_byte(struct at91_twi_dev *dev) +{ + if (dev->buf_len <= 0) + return; + + at91_twi_write(dev, AT91_TWI_THR, *dev->buf); + + /* send stop when last byte has been written */ + if (--dev->buf_len == 0) + at91_twi_write(dev, AT91_TWI_CR, AT91_TWI_STOP); + + dev_dbg(dev->dev, "wrote 0x%x, to go %d\n", *dev->buf, dev->buf_len); + + ++dev->buf; +} + +static void at91_twi_read_next_byte(struct at91_twi_dev *dev) +{ + if (dev->buf_len <= 0) + return; + + *dev->buf = at91_twi_read(dev, AT91_TWI_RHR) & 0xff; + --dev->buf_len; + + /* handle I2C_SMBUS_BLOCK_DATA */ + if (unlikely(dev->msg->flags & I2C_M_RECV_LEN)) { + dev->msg->flags &= ~I2C_M_RECV_LEN; + dev->buf_len += *dev->buf; + dev->msg->len = dev->buf_len + 1; + dev_dbg(dev->dev, "received block length %d\n", dev->buf_len); + } + + /* send stop if second but last byte has been read */ + if (dev->buf_len == 1) + at91_twi_write(dev, AT91_TWI_CR, AT91_TWI_STOP); + + dev_dbg(dev->dev, "read 0x%x, to go %d\n", *dev->buf, dev->buf_len); + + ++dev->buf; +} + +static irqreturn_t atmel_twi_interrupt(int irq, void *dev_id) +{ + struct at91_twi_dev *dev = dev_id; + const unsigned status = at91_twi_read(dev, AT91_TWI_SR); + const unsigned irqstatus = status & at91_twi_read(dev, AT91_TWI_IMR); + + if (!irqstatus) + return IRQ_NONE; + else if (irqstatus & AT91_TWI_RXRDY) + at91_twi_read_next_byte(dev); + else if (irqstatus & AT91_TWI_TXRDY) + at91_twi_write_next_byte(dev); + + /* catch error flags */ + dev->transfer_status |= status; + + if (irqstatus & AT91_TWI_TXCOMP) { + at91_disable_twi_interrupts(dev); + complete(&dev->cmd_complete); + } + + return IRQ_HANDLED; +} + +static int at91_do_twi_transfer(struct at91_twi_dev *dev) +{ + int ret; + bool has_unre_flag = dev->pdata->has_unre_flag; + + dev_dbg(dev->dev, "transfer: %s %d bytes.\n", + (dev->msg->flags & I2C_M_RD) ? "read" : "write", dev->buf_len); + + INIT_COMPLETION(dev->cmd_complete); + dev->transfer_status = 0; + if (dev->msg->flags & I2C_M_RD) { + unsigned start_flags = AT91_TWI_START; + + if (at91_twi_read(dev, AT91_TWI_SR) & AT91_TWI_RXRDY) { + dev_err(dev->dev, "RXRDY still set!"); + at91_twi_read(dev, AT91_TWI_RHR); + } + + /* if only one byte is to be read, immediately stop transfer */ + if (dev->buf_len <= 1 && !(dev->msg->flags & I2C_M_RECV_LEN)) + start_flags |= AT91_TWI_STOP; + at91_twi_write(dev, AT91_TWI_CR, start_flags); + at91_twi_write(dev, AT91_TWI_IER, + AT91_TWI_TXCOMP | AT91_TWI_RXRDY); + } else { + at91_twi_write_next_byte(dev); + at91_twi_write(dev, AT91_TWI_IER, + AT91_TWI_TXCOMP | AT91_TWI_TXRDY); + } + + ret = wait_for_completion_interruptible_timeout(&dev->cmd_complete, + dev->adapter.timeout); + if (ret == 0) { + dev_err(dev->dev, "controller timed out\n"); + at91_init_twi_bus(dev); + return -ETIMEDOUT; + } + if (dev->transfer_status & AT91_TWI_NACK) { + dev_dbg(dev->dev, "received nack\n"); + return -EREMOTEIO; + } + if (dev->transfer_status & AT91_TWI_OVRE) { + dev_err(dev->dev, "overrun while reading\n"); + return -EIO; + } + if (has_unre_flag && dev->transfer_status & AT91_TWI_UNRE) { + dev_err(dev->dev, "underrun while writing\n"); + return -EIO; + } + dev_dbg(dev->dev, "transfer complete\n"); + + return 0; +} + +static int at91_twi_xfer(struct i2c_adapter *adap, struct i2c_msg *msg, int num) +{ + struct at91_twi_dev *dev = i2c_get_adapdata(adap); + int ret; + unsigned int_addr_flag = 0; + struct i2c_msg *m_start = msg; + + dev_dbg(&adap->dev, "at91_xfer: processing %d messages:\n", num); + + /* + * The hardware can handle at most two messages concatenated by a + * repeated start via it's internal address feature. + */ + if (num > 2) { + dev_err(dev->dev, + "cannot handle more than two concatenated messages.\n"); + return 0; + } else if (num == 2) { + int internal_address = 0; + int i; + + if (msg->flags & I2C_M_RD) { + dev_err(dev->dev, "first transfer must be write.\n"); + return -EINVAL; + } + if (msg->len > 3) { + dev_err(dev->dev, "first message size must be <= 3.\n"); + return -EINVAL; + } + + /* 1st msg is put into the internal address, start with 2nd */ + m_start = &msg[1]; + for (i = 0; i < msg->len; ++i) { + const unsigned addr = msg->buf[msg->len - 1 - i]; + + internal_address |= addr << (8 * i); + int_addr_flag += AT91_TWI_IADRSZ_1; + } + at91_twi_write(dev, AT91_TWI_IADR, internal_address); + } + + at91_twi_write(dev, AT91_TWI_MMR, (m_start->addr << 16) | int_addr_flag + | ((m_start->flags & I2C_M_RD) ? AT91_TWI_MREAD : 0)); + + dev->buf_len = m_start->len; + dev->buf = m_start->buf; + dev->msg = m_start; + + ret = at91_do_twi_transfer(dev); + + return (ret < 0) ? ret : num; +} + +static u32 at91_twi_func(struct i2c_adapter *adapter) +{ + return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL + | I2C_FUNC_SMBUS_READ_BLOCK_DATA; +} + +static struct i2c_algorithm at91_twi_algorithm = { + .master_xfer = at91_twi_xfer, + .functionality = at91_twi_func, +}; + +static struct at91_twi_pdata at91rm9200_config = { + .clk_max_div = 5, + .clk_offset = 3, + .has_unre_flag = true, +}; + +static struct at91_twi_pdata at91sam9261_config = { + .clk_max_div = 5, + .clk_offset = 4, + .has_unre_flag = false, +}; + +static struct at91_twi_pdata at91sam9260_config = { + .clk_max_div = 7, + .clk_offset = 4, + .has_unre_flag = false, +}; + +static struct at91_twi_pdata at91sam9g20_config = { + .clk_max_div = 7, + .clk_offset = 4, + .has_unre_flag = false, +}; + +static struct at91_twi_pdata at91sam9g10_config = { + .clk_max_div = 7, + .clk_offset = 4, + .has_unre_flag = false, +}; + +static const struct platform_device_id at91_twi_devtypes[] = { + { + .name = "i2c-at91rm9200", + .driver_data = (unsigned long) &at91rm9200_config, + }, { + .name = "i2c-at91sam9261", + .driver_data = (unsigned long) &at91sam9261_config, + }, { + .name = "i2c-at91sam9260", + .driver_data = (unsigned long) &at91sam9260_config, + }, { + .name = "i2c-at91sam9g20", + .driver_data = (unsigned long) &at91sam9g20_config, + }, { + .name = "i2c-at91sam9g10", + .driver_data = (unsigned long) &at91sam9g10_config, + }, { + /* sentinel */ + } +}; + +static int __devinit at91_twi_probe(struct platform_device *pdev) +{ + struct at91_twi_dev *dev; + struct resource *mem; + int rc; + + dev = devm_kzalloc(&pdev->dev, sizeof(*dev), GFP_KERNEL); + if (!dev) + return -ENOMEM; + init_completion(&dev->cmd_complete); + dev->dev = &pdev->dev; + + mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!mem) + return -ENODEV; + + dev->pdata = at91_twi_get_driver_data(pdev); + if (!dev->pdata) + return -ENODEV; + + dev->base = devm_request_and_ioremap(&pdev->dev, mem); + if (!dev->base) + return -EBUSY; + + dev->irq = platform_get_irq(pdev, 0); + if (dev->irq < 0) + return dev->irq; + + rc = devm_request_irq(&pdev->dev, dev->irq, atmel_twi_interrupt, 0, + dev_name(dev->dev), dev); + if (rc) { + dev_err(dev->dev, "Cannot get irq %d: %d\n", dev->irq, rc); + return rc; + } + + platform_set_drvdata(pdev, dev); + + dev->clk = devm_clk_get(dev->dev, NULL); + if (IS_ERR(dev->clk)) { + dev_err(dev->dev, "no clock defined\n"); + return -ENODEV; + } + clk_prepare_enable(dev->clk); + + at91_calc_twi_clock(dev, TWI_CLK_HZ); + at91_init_twi_bus(dev); + + snprintf(dev->adapter.name, sizeof(dev->adapter.name), "AT91"); + i2c_set_adapdata(&dev->adapter, dev); + dev->adapter.owner = THIS_MODULE; + dev->adapter.class = I2C_CLASS_HWMON; + dev->adapter.algo = &at91_twi_algorithm; + dev->adapter.dev.parent = dev->dev; + dev->adapter.nr = pdev->id; + dev->adapter.timeout = AT91_I2C_TIMEOUT; + + rc = i2c_add_numbered_adapter(&dev->adapter); + if (rc) { + dev_err(dev->dev, "Adapter %s registration failed\n", + dev->adapter.name); + clk_disable_unprepare(dev->clk); + return rc; + } + + dev_info(dev->dev, "AT91 i2c bus driver.\n"); + return 0; +} + +static int __devexit at91_twi_remove(struct platform_device *pdev) +{ + struct at91_twi_dev *dev = platform_get_drvdata(pdev); + int rc; + + rc = i2c_del_adapter(&dev->adapter); + clk_disable_unprepare(dev->clk); + + return rc; +} + +#ifdef CONFIG_PM + +static int at91_twi_runtime_suspend(struct device *dev) +{ + struct at91_twi_dev *twi_dev = dev_get_drvdata(dev); + + clk_disable(twi_dev->clk); + + return 0; +} + +static int at91_twi_runtime_resume(struct device *dev) +{ + struct at91_twi_dev *twi_dev = dev_get_drvdata(dev); + + return clk_enable(twi_dev->clk); +} + +static const struct dev_pm_ops at91_twi_pm = { + .runtime_suspend = at91_twi_runtime_suspend, + .runtime_resume = at91_twi_runtime_resume, +}; + +#define at91_twi_pm_ops (&at91_twi_pm) +#else +#define at91_twi_pm_ops NULL +#endif + +static struct platform_driver at91_twi_driver = { + .probe = at91_twi_probe, + .remove = __devexit_p(at91_twi_remove), + .id_table = at91_twi_devtypes, + .driver = { + .name = "at91_i2c", + .owner = THIS_MODULE, + .pm = at91_twi_pm_ops, + }, +}; + +static int __init at91_twi_init(void) +{ + return platform_driver_register(&at91_twi_driver); +} + +static void __exit at91_twi_exit(void) +{ + platform_driver_unregister(&at91_twi_driver); +} + +subsys_initcall(at91_twi_init); +module_exit(at91_twi_exit); + +MODULE_AUTHOR("Nikolaus Voss "); +MODULE_DESCRIPTION("I2C (TWI) driver for Atmel AT91"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:at91_i2c"); -- cgit v0.10.2 From 774c8018d2566207c92f47b6421dad7d88bbfd49 Mon Sep 17 00:00:00 2001 From: Nikolaus Voss Date: Tue, 8 Nov 2011 12:11:03 +0100 Subject: arm: at91: G45 TWI: remove open drain setting for twi function gpios The G45 datasheets explicitly states that setting the open drain property on peripheral function gpios is not allowed. (How about other A91 chips?) Signed-off-by: Nikolaus Voss Tested-by: Ludovic Desroches Reviewed-by: Nicolas Ferre Signed-off-by: Wolfram Sang diff --git a/arch/arm/mach-at91/at91sam9g45_devices.c b/arch/arm/mach-at91/at91sam9g45_devices.c index ac1b0f8..0fcd871 100644 --- a/arch/arm/mach-at91/at91sam9g45_devices.c +++ b/arch/arm/mach-at91/at91sam9g45_devices.c @@ -686,18 +686,12 @@ void __init at91_add_device_i2c(short i2c_id, struct i2c_board_info *devices, in /* pins used for TWI interface */ if (i2c_id == 0) { at91_set_A_periph(AT91_PIN_PA20, 0); /* TWD */ - at91_set_multi_drive(AT91_PIN_PA20, 1); - at91_set_A_periph(AT91_PIN_PA21, 0); /* TWCK */ - at91_set_multi_drive(AT91_PIN_PA21, 1); platform_device_register(&at91sam9g45_twi0_device); } else { at91_set_A_periph(AT91_PIN_PB10, 0); /* TWD */ - at91_set_multi_drive(AT91_PIN_PB10, 1); - at91_set_A_periph(AT91_PIN_PB11, 0); /* TWCK */ - at91_set_multi_drive(AT91_PIN_PB11, 1); platform_device_register(&at91sam9g45_twi1_device); } -- cgit v0.10.2 From 94e734655fbe294c50d304547cae033e87ec229e Mon Sep 17 00:00:00 2001 From: Ludovic Desroches Date: Wed, 12 Sep 2012 08:42:13 +0200 Subject: ARM: at91: do not configure at91sam9g10 twi pio as open-drain As indicated in the datasheet, TWD and TWCK must not be programmed as open-drain. Signed-off-by: Ludovic Desroches Acked-by: Nikolaus Voss Acked-by: Nicolas Ferre Signed-off-by: Wolfram Sang diff --git a/arch/arm/mach-at91/at91sam9261_devices.c b/arch/arm/mach-at91/at91sam9261_devices.c index 29188ef..50d3179 100644 --- a/arch/arm/mach-at91/at91sam9261_devices.c +++ b/arch/arm/mach-at91/at91sam9261_devices.c @@ -327,16 +327,16 @@ void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices) /* IP version is not the same on 9261 and g10 */ if (cpu_is_at91sam9g10()) { at91sam9261_twi_device.name = "i2c-at91sam9g10"; + /* I2C PIO must not be configured as open-drain on this chip */ } else { at91sam9261_twi_device.name = "i2c-at91sam9261"; + at91_set_multi_drive(AT91_PIN_PA7, 1); + at91_set_multi_drive(AT91_PIN_PA8, 1); } /* pins used for TWI interface */ at91_set_A_periph(AT91_PIN_PA7, 0); /* TWD */ - at91_set_multi_drive(AT91_PIN_PA7, 1); - at91_set_A_periph(AT91_PIN_PA8, 0); /* TWCK */ - at91_set_multi_drive(AT91_PIN_PA8, 1); i2c_register_board_info(0, devices, nr_devices); platform_device_register(&at91sam9261_twi_device); -- cgit v0.10.2 From 70d46a241ed3bb0d1bb2bc15720b6f7c215c37f5 Mon Sep 17 00:00:00 2001 From: Ludovic Desroches Date: Wed, 12 Sep 2012 08:42:14 +0200 Subject: i2c: at91: add dt support to i2c-at91 Signed-off-by: Ludovic Desroches Acked-by: Nikolaus Voss Acked-by: Nicolas Ferre Signed-off-by: Wolfram Sang diff --git a/Documentation/devicetree/bindings/i2c/atmel-i2c.txt b/Documentation/devicetree/bindings/i2c/atmel-i2c.txt new file mode 100644 index 0000000..b689a0d --- /dev/null +++ b/Documentation/devicetree/bindings/i2c/atmel-i2c.txt @@ -0,0 +1,30 @@ +I2C for Atmel platforms + +Required properties : +- compatible : Must be "atmel,at91rm9200-i2c", "atmel,at91sam9261-i2c", + "atmel,at91sam9260-i2c", "atmel,at91sam9g20-i2c", "atmel,at91sam9g10-i2c" + or "atmel,at91sam9x5-i2c" +- reg: physical base address of the controller and length of memory mapped + region. +- interrupts: interrupt number to the cpu. +- #address-cells = <1>; +- #size-cells = <0>; + +Optional properties: +- Child nodes conforming to i2c bus binding + +Examples : + +i2c0: i2c@fff84000 { + compatible = "atmel,at91sam9g20-i2c"; + reg = <0xfff84000 0x100>; + interrupts = <12 4 6>; + #address-cells = <1>; + #size-cells = <0>; + + 24c512@50 { + compatible = "24c512"; + reg = <0x50>; + pagesize = <128>; + } +} diff --git a/drivers/i2c/busses/i2c-at91.c b/drivers/i2c/busses/i2c-at91.c index 78bcad0..aa59a25 100644 --- a/drivers/i2c/busses/i2c-at91.c +++ b/drivers/i2c/busses/i2c-at91.c @@ -24,6 +24,9 @@ #include #include #include +#include +#include +#include #include #include @@ -347,6 +350,12 @@ static struct at91_twi_pdata at91sam9g10_config = { .has_unre_flag = false, }; +static struct at91_twi_pdata at91sam9x5_config = { + .clk_max_div = 7, + .clk_offset = 4, + .has_unre_flag = false, +}; + static const struct platform_device_id at91_twi_devtypes[] = { { .name = "i2c-at91rm9200", @@ -368,6 +377,42 @@ static const struct platform_device_id at91_twi_devtypes[] = { } }; +#if defined(CONFIG_OF) +static const struct of_device_id atmel_twi_dt_ids[] = { + { + .compatible = "atmel,at91sam9260-i2c", + .data = &at91sam9260_config, + } , { + .compatible = "atmel,at91sam9g20-i2c", + .data = &at91sam9g20_config, + } , { + .compatible = "atmel,at91sam9g10-i2c", + .data = &at91sam9g10_config, + }, { + .compatible = "atmel,at91sam9x5-i2c", + .data = &at91sam9x5_config, + }, { + /* sentinel */ + } +}; +MODULE_DEVICE_TABLE(of, atmel_twi_dt_ids); +#else +#define atmel_twi_dt_ids NULL +#endif + +static struct at91_twi_pdata * __devinit at91_twi_get_driver_data( + struct platform_device *pdev) +{ + if (pdev->dev.of_node) { + const struct of_device_id *match; + match = of_match_node(atmel_twi_dt_ids, pdev->dev.of_node); + if (!match) + return NULL; + return match->data; + } + return (struct at91_twi_pdata *) platform_get_device_id(pdev)->driver_data; +} + static int __devinit at91_twi_probe(struct platform_device *pdev) { struct at91_twi_dev *dev; @@ -423,6 +468,7 @@ static int __devinit at91_twi_probe(struct platform_device *pdev) dev->adapter.dev.parent = dev->dev; dev->adapter.nr = pdev->id; dev->adapter.timeout = AT91_I2C_TIMEOUT; + dev->adapter.dev.of_node = pdev->dev.of_node; rc = i2c_add_numbered_adapter(&dev->adapter); if (rc) { @@ -432,6 +478,8 @@ static int __devinit at91_twi_probe(struct platform_device *pdev) return rc; } + of_i2c_register_devices(&dev->adapter); + dev_info(dev->dev, "AT91 i2c bus driver.\n"); return 0; } @@ -482,6 +530,7 @@ static struct platform_driver at91_twi_driver = { .driver = { .name = "at91_i2c", .owner = THIS_MODULE, + .of_match_table = atmel_twi_dt_ids, .pm = at91_twi_pm_ops, }, }; -- cgit v0.10.2 From f7d19b9065569268dd13307213c40d168fb0be82 Mon Sep 17 00:00:00 2001 From: Ludovic Desroches Date: Wed, 12 Sep 2012 08:42:15 +0200 Subject: ARM: at91: add clocks for I2C DT entries Signed-off-by: Ludovic Desroches Acked-by: Nikolaus Voss Acked-by: Nicolas Ferre Signed-off-by: Wolfram Sang diff --git a/arch/arm/mach-at91/at91sam9260.c b/arch/arm/mach-at91/at91sam9260.c index 5bd19a4..ad29f93 100644 --- a/arch/arm/mach-at91/at91sam9260.c +++ b/arch/arm/mach-at91/at91sam9260.c @@ -221,6 +221,7 @@ static struct clk_lookup periph_clocks_lookups[] = { CLKDEV_CON_DEV_ID("usart", "fffd0000.serial", &usart3_clk), CLKDEV_CON_DEV_ID("usart", "fffd4000.serial", &usart4_clk), CLKDEV_CON_DEV_ID("usart", "fffd8000.serial", &usart5_clk), + CLKDEV_CON_DEV_ID(NULL, "fffac000.i2c", &twi_clk), /* more tc lookup table for DT entries */ CLKDEV_CON_DEV_ID("t0_clk", "fffa0000.timer", &tc0_clk), CLKDEV_CON_DEV_ID("t1_clk", "fffa0000.timer", &tc1_clk), diff --git a/arch/arm/mach-at91/at91sam9263.c b/arch/arm/mach-at91/at91sam9263.c index e6b5956..200d5a7b 100644 --- a/arch/arm/mach-at91/at91sam9263.c +++ b/arch/arm/mach-at91/at91sam9263.c @@ -211,6 +211,7 @@ static struct clk_lookup periph_clocks_lookups[] = { CLKDEV_CON_DEV_ID("hclk", "a00000.ohci", &ohci_clk), CLKDEV_CON_DEV_ID("spi_clk", "fffa4000.spi", &spi0_clk), CLKDEV_CON_DEV_ID("spi_clk", "fffa8000.spi", &spi1_clk), + CLKDEV_CON_DEV_ID(NULL, "fff88000.i2c", &twi_clk), }; static struct clk_lookup usart_clocks_lookups[] = { diff --git a/arch/arm/mach-at91/at91sam9g45.c b/arch/arm/mach-at91/at91sam9g45.c index 858f032..84af1b5 100644 --- a/arch/arm/mach-at91/at91sam9g45.c +++ b/arch/arm/mach-at91/at91sam9g45.c @@ -256,6 +256,8 @@ static struct clk_lookup periph_clocks_lookups[] = { CLKDEV_CON_DEV_ID("t0_clk", "fffd4000.timer", &tcb0_clk), CLKDEV_CON_DEV_ID("hclk", "700000.ohci", &uhphs_clk), CLKDEV_CON_DEV_ID("ehci_clk", "800000.ehci", &uhphs_clk), + CLKDEV_CON_DEV_ID(NULL, "fff84000.i2c", &twi0_clk), + CLKDEV_CON_DEV_ID(NULL, "fff88000.i2c", &twi1_clk), /* fake hclk clock */ CLKDEV_CON_DEV_ID("hclk", "at91_ohci", &uhphs_clk), CLKDEV_CON_ID("pioA", &pioA_clk), diff --git a/arch/arm/mach-at91/at91sam9n12.c b/arch/arm/mach-at91/at91sam9n12.c index 0849466..732d3d3 100644 --- a/arch/arm/mach-at91/at91sam9n12.c +++ b/arch/arm/mach-at91/at91sam9n12.c @@ -169,6 +169,8 @@ static struct clk_lookup periph_clocks_lookups[] = { CLKDEV_CON_DEV_ID("t0_clk", "f8008000.timer", &tcb_clk), CLKDEV_CON_DEV_ID("t0_clk", "f800c000.timer", &tcb_clk), CLKDEV_CON_DEV_ID("dma_clk", "ffffec00.dma-controller", &dma_clk), + CLKDEV_CON_DEV_ID(NULL, "f8010000.i2c", &twi0_clk), + CLKDEV_CON_DEV_ID(NULL, "f8014000.i2c", &twi1_clk), CLKDEV_CON_ID("pioA", &pioAB_clk), CLKDEV_CON_ID("pioB", &pioAB_clk), CLKDEV_CON_ID("pioC", &pioCD_clk), diff --git a/arch/arm/mach-at91/at91sam9x5.c b/arch/arm/mach-at91/at91sam9x5.c index 4bad4a2..e503538 100644 --- a/arch/arm/mach-at91/at91sam9x5.c +++ b/arch/arm/mach-at91/at91sam9x5.c @@ -231,9 +231,9 @@ static struct clk_lookup periph_clocks_lookups[] = { CLKDEV_CON_DEV_ID("t0_clk", "f800c000.timer", &tcb0_clk), CLKDEV_CON_DEV_ID("dma_clk", "ffffec00.dma-controller", &dma0_clk), CLKDEV_CON_DEV_ID("dma_clk", "ffffee00.dma-controller", &dma1_clk), - CLKDEV_CON_DEV_ID(NULL, "at91_i2c.0", &twi0_clk), - CLKDEV_CON_DEV_ID(NULL, "at91_i2c.1", &twi1_clk), - CLKDEV_CON_DEV_ID(NULL, "at91_i2c.2", &twi2_clk), + CLKDEV_CON_DEV_ID(NULL, "f8010000.i2c", &twi0_clk), + CLKDEV_CON_DEV_ID(NULL, "f8014000.i2c", &twi1_clk), + CLKDEV_CON_DEV_ID(NULL, "f8018000.i2c", &twi2_clk), CLKDEV_CON_ID("pioA", &pioAB_clk), CLKDEV_CON_ID("pioB", &pioAB_clk), CLKDEV_CON_ID("pioC", &pioCD_clk), -- cgit v0.10.2 From 05dcd361a2785c3fcb9c43a621da4434cf1519b4 Mon Sep 17 00:00:00 2001 From: Ludovic Desroches Date: Wed, 12 Sep 2012 08:42:16 +0200 Subject: ARM: dts: add twi nodes for atmel SoCs Add TWI nodes for atmel SoCs but keep i2c-gpio ones in order to let the choice to the user in dts files. Signed-off-by: Ludovic Desroches Acked-by: Nicolas Ferre Signed-off-by: Wolfram Sang diff --git a/arch/arm/boot/dts/at91sam9260.dtsi b/arch/arm/boot/dts/at91sam9260.dtsi index 66389c1..edef452 100644 --- a/arch/arm/boot/dts/at91sam9260.dtsi +++ b/arch/arm/boot/dts/at91sam9260.dtsi @@ -28,6 +28,7 @@ gpio2 = &pioC; tcb0 = &tcb0; tcb1 = &tcb1; + i2c0 = &i2c0; }; cpus { cpu@0 { @@ -199,6 +200,15 @@ status = "disabled"; }; + i2c0: i2c@fffac000 { + compatible = "atmel,at91sam9260-i2c"; + reg = <0xfffac000 0x100>; + interrupts = <11 4 6>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + adc0: adc@fffe0000 { compatible = "atmel,at91sam9260-adc"; reg = <0xfffe0000 0x100>; diff --git a/arch/arm/boot/dts/at91sam9263.dtsi b/arch/arm/boot/dts/at91sam9263.dtsi index b460d6c..e7942c7 100644 --- a/arch/arm/boot/dts/at91sam9263.dtsi +++ b/arch/arm/boot/dts/at91sam9263.dtsi @@ -24,6 +24,7 @@ gpio3 = &pioD; gpio4 = &pioE; tcb0 = &tcb0; + i2c0 = &i2c0; }; cpus { cpu@0 { @@ -180,6 +181,15 @@ interrupts = <24 4 2>; status = "disabled"; }; + + i2c0: i2c@fff88000 { + compatible = "atmel,at91sam9263-i2c"; + reg = <0xfff88000 0x100>; + interrupts = <13 4 6>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; }; nand0: nand@40000000 { diff --git a/arch/arm/boot/dts/at91sam9g20.dtsi b/arch/arm/boot/dts/at91sam9g20.dtsi index 2a1d1ca..75ce6e7 100644 --- a/arch/arm/boot/dts/at91sam9g20.dtsi +++ b/arch/arm/boot/dts/at91sam9g20.dtsi @@ -18,6 +18,10 @@ ahb { apb { + i2c0: i2c@fffac000 { + compatible = "atmel,at91sam9g20-i2c"; + }; + adc0: adc@fffe0000 { atmel,adc-startup-time = <40>; }; diff --git a/arch/arm/boot/dts/at91sam9g45.dtsi b/arch/arm/boot/dts/at91sam9g45.dtsi index bafa880..ae4bb6d 100644 --- a/arch/arm/boot/dts/at91sam9g45.dtsi +++ b/arch/arm/boot/dts/at91sam9g45.dtsi @@ -29,6 +29,8 @@ gpio4 = &pioE; tcb0 = &tcb0; tcb1 = &tcb1; + i2c0 = &i2c0; + i2c1 = &i2c1; }; cpus { cpu@0 { @@ -201,6 +203,24 @@ status = "disabled"; }; + i2c0: i2c@fff84000 { + compatible = "atmel,at91sam9g10-i2c"; + reg = <0xfff84000 0x100>; + interrupts = <12 4 6>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c1: i2c@fff88000 { + compatible = "atmel,at91sam9g10-i2c"; + reg = <0xfff88000 0x100>; + interrupts = <13 4 6>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + adc0: adc@fffb0000 { compatible = "atmel,at91sam9260-adc"; reg = <0xfffb0000 0x100>; diff --git a/arch/arm/boot/dts/at91sam9n12.dtsi b/arch/arm/boot/dts/at91sam9n12.dtsi index bfac0df..42e9fba 100644 --- a/arch/arm/boot/dts/at91sam9n12.dtsi +++ b/arch/arm/boot/dts/at91sam9n12.dtsi @@ -26,6 +26,8 @@ gpio3 = &pioD; tcb0 = &tcb0; tcb1 = &tcb1; + i2c0 = &i2c0; + i2c1 = &i2c1; }; cpus { cpu@0 { @@ -178,6 +180,24 @@ atmel,use-dma-tx; status = "disabled"; }; + + i2c0: i2c@f8010000 { + compatible = "atmel,at91sam9x5-i2c"; + reg = <0xf8010000 0x100>; + interrupts = <9 4 6>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c1: i2c@f8014000 { + compatible = "atmel,at91sam9x5-i2c"; + reg = <0xf8014000 0x100>; + interrupts = <10 4 6>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; }; nand0: nand@40000000 { diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi index 4a18c39..e05afbc 100644 --- a/arch/arm/boot/dts/at91sam9x5.dtsi +++ b/arch/arm/boot/dts/at91sam9x5.dtsi @@ -27,6 +27,9 @@ gpio3 = &pioD; tcb0 = &tcb0; tcb1 = &tcb1; + i2c0 = &i2c0; + i2c1 = &i2c1; + i2c2 = &i2c2; }; cpus { cpu@0 { @@ -192,6 +195,33 @@ status = "disabled"; }; + i2c0: i2c@f8010000 { + compatible = "atmel,at91sam9x5-i2c"; + reg = <0xf8010000 0x100>; + interrupts = <9 4 6>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c1: i2c@f8014000 { + compatible = "atmel,at91sam9x5-i2c"; + reg = <0xf8014000 0x100>; + interrupts = <10 4 6>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c2: i2c@f8018000 { + compatible = "atmel,at91sam9x5-i2c"; + reg = <0xf8018000 0x100>; + interrupts = <11 4 6>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + adc0: adc@f804c000 { compatible = "atmel,at91sam9260-adc"; reg = <0xf804c000 0x100>; -- cgit v0.10.2 From fbc1871511ed201504d6e5b36f13ea77e4be2907 Mon Sep 17 00:00:00 2001 From: Ludovic Desroches Date: Wed, 12 Sep 2012 08:42:17 +0200 Subject: ARM: dts: add twi nodes for atmel boards Still use i2c-gpio on boards which have a SoC with a TWI IP which doesn't have clock stretching in transmission mode. Signed-off-by: Ludovic Desroches Acked-by: Nicolas Ferre Signed-off-by: Wolfram Sang diff --git a/arch/arm/boot/dts/at91sam9g25ek.dts b/arch/arm/boot/dts/at91sam9g25ek.dts index 96514c1..877c08f 100644 --- a/arch/arm/boot/dts/at91sam9g25ek.dts +++ b/arch/arm/boot/dts/at91sam9g25ek.dts @@ -32,6 +32,18 @@ phy-mode = "rmii"; status = "okay"; }; + + i2c0: i2c@f8010000 { + status = "okay"; + }; + + i2c1: i2c@f8014000 { + status = "okay"; + }; + + i2c2: i2c@f8018000 { + status = "okay"; + }; }; usb0: ohci@00600000 { diff --git a/arch/arm/boot/dts/at91sam9m10g45ek.dts b/arch/arm/boot/dts/at91sam9m10g45ek.dts index a3633bd..15e1dd4 100644 --- a/arch/arm/boot/dts/at91sam9m10g45ek.dts +++ b/arch/arm/boot/dts/at91sam9m10g45ek.dts @@ -46,6 +46,14 @@ phy-mode = "rmii"; status = "okay"; }; + + i2c0: i2c@fff84000 { + status = "okay"; + }; + + i2c1: i2c@fff88000 { + status = "okay"; + }; }; nand0: nand@40000000 { diff --git a/arch/arm/boot/dts/at91sam9n12ek.dts b/arch/arm/boot/dts/at91sam9n12ek.dts index f4e43e3..912b2c2 100644 --- a/arch/arm/boot/dts/at91sam9n12ek.dts +++ b/arch/arm/boot/dts/at91sam9n12ek.dts @@ -37,6 +37,14 @@ dbgu: serial@fffff200 { status = "okay"; }; + + i2c0: i2c@f8010000 { + status = "okay"; + }; + + i2c1: i2c@f8014000 { + status = "okay"; + }; }; nand0: nand@40000000 { -- cgit v0.10.2 From d9ebd04d3476634c29ce0feffbc982e1cb25ed80 Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Wed, 12 Sep 2012 16:27:55 +0530 Subject: i2c: omap: switch to devm_* API that helps deleting some boiler plate code and lets driver-core manage our resources for us. Signed-off-by: Felipe Balbi Signed-off-by: Shubhrajyoti D Signed-off-by: Wolfram Sang diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c index 5d19a49..2d9b03c 100644 --- a/drivers/i2c/busses/i2c-omap.c +++ b/drivers/i2c/busses/i2c-omap.c @@ -943,7 +943,7 @@ omap_i2c_probe(struct platform_device *pdev) { struct omap_i2c_dev *dev; struct i2c_adapter *adap; - struct resource *mem, *irq, *ioarea; + struct resource *mem, *irq; struct omap_i2c_bus_platform_data *pdata = pdev->dev.platform_data; struct device_node *node = pdev->dev.of_node; const struct of_device_id *match; @@ -962,17 +962,16 @@ omap_i2c_probe(struct platform_device *pdev) return -ENODEV; } - ioarea = request_mem_region(mem->start, resource_size(mem), - pdev->name); - if (!ioarea) { - dev_err(&pdev->dev, "I2C region already claimed\n"); - return -EBUSY; + dev = devm_kzalloc(&pdev->dev, sizeof(struct omap_i2c_dev), GFP_KERNEL); + if (!dev) { + dev_err(&pdev->dev, "Menory allocation failed\n"); + return -ENOMEM; } - dev = kzalloc(sizeof(struct omap_i2c_dev), GFP_KERNEL); - if (!dev) { - r = -ENOMEM; - goto err_release_region; + dev->base = devm_request_and_ioremap(&pdev->dev, mem); + if (!dev->base) { + dev_err(&pdev->dev, "I2C region already claimed\n"); + return -ENOMEM; } match = of_match_device(of_match_ptr(omap_i2c_of_match), &pdev->dev); @@ -995,11 +994,6 @@ omap_i2c_probe(struct platform_device *pdev) dev->dev = &pdev->dev; dev->irq = irq->start; - dev->base = ioremap(mem->start, resource_size(mem)); - if (!dev->base) { - r = -ENOMEM; - goto err_free_mem; - } platform_set_drvdata(pdev, dev); init_completion(&dev->cmd_complete); @@ -1057,7 +1051,8 @@ omap_i2c_probe(struct platform_device *pdev) isr = (dev->rev < OMAP_I2C_OMAP1_REV_2) ? omap_i2c_omap1_isr : omap_i2c_isr; - r = request_irq(dev->irq, isr, IRQF_NO_SUSPEND, pdev->name, dev); + r = devm_request_irq(&pdev->dev, dev->irq, isr, IRQF_NO_SUSPEND, + pdev->name, dev); if (r) { dev_err(dev->dev, "failure requesting irq %i\n", dev->irq); @@ -1081,7 +1076,7 @@ omap_i2c_probe(struct platform_device *pdev) r = i2c_add_numbered_adapter(adap); if (r) { dev_err(dev->dev, "failure adding adapter\n"); - goto err_free_irq; + goto err_unuse_clocks; } of_i2c_register_devices(adap); @@ -1090,18 +1085,12 @@ omap_i2c_probe(struct platform_device *pdev) return 0; -err_free_irq: - free_irq(dev->irq, dev); err_unuse_clocks: omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, 0); pm_runtime_put(dev->dev); - iounmap(dev->base); pm_runtime_disable(&pdev->dev); err_free_mem: platform_set_drvdata(pdev, NULL); - kfree(dev); -err_release_region: - release_mem_region(mem->start, resource_size(mem)); return r; } @@ -1109,12 +1098,10 @@ err_release_region: static int __devexit omap_i2c_remove(struct platform_device *pdev) { struct omap_i2c_dev *dev = platform_get_drvdata(pdev); - struct resource *mem; int ret; platform_set_drvdata(pdev, NULL); - free_irq(dev->irq, dev); i2c_del_adapter(&dev->adapter); ret = pm_runtime_get_sync(&pdev->dev); if (IS_ERR_VALUE(ret)) @@ -1123,10 +1110,6 @@ static int __devexit omap_i2c_remove(struct platform_device *pdev) omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, 0); pm_runtime_put(&pdev->dev); pm_runtime_disable(&pdev->dev); - iounmap(dev->base); - kfree(dev); - mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); - release_mem_region(mem->start, resource_size(mem)); return 0; } -- cgit v0.10.2 From baf3d7b7210c705bf8ca7afb03cd7f0b61d27058 Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Wed, 12 Sep 2012 16:27:56 +0530 Subject: i2c: omap: simplify num_bytes handling trivial patch, no functional changes If the fifo is disabled or fifo_size is 0 the num_bytes is set to 1. Else it is set to fifo_size or in case of a draining interrupt the remaining bytes in the buff stat. So the zero check is redundant and can be safely optimised. Signed-off-by: Felipe Balbi Reviewed-by : Santosh Shilimkar Signed-off-by: Shubhrajyoti D Signed-off-by: Wolfram Sang diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c index 2d9b03c..236cb38 100644 --- a/drivers/i2c/busses/i2c-omap.c +++ b/drivers/i2c/busses/i2c-omap.c @@ -812,8 +812,7 @@ complete: OMAP_I2C_BUFSTAT_REG) >> 8) & 0x3F; } - while (num_bytes) { - num_bytes--; + while (num_bytes--) { w = omap_i2c_read_reg(dev, OMAP_I2C_DATA_REG); if (dev->buf_len) { *dev->buf++ = w; @@ -855,8 +854,7 @@ complete: OMAP_I2C_BUFSTAT_REG) & 0x3F; } - while (num_bytes) { - num_bytes--; + while (num_bytes--) { w = 0; if (dev->buf_len) { w = *dev->buf++; -- cgit v0.10.2 From 2049b5bcdd2172424c1ffc9b87d8f40020e9ebd6 Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Wed, 12 Sep 2012 16:27:57 +0530 Subject: i2c: omap: decrease indentation level on data handling The patch intends to decrease the indentation level on the data handling by using the fact that else of if (dev->buf_len) is same as if (!dev->buf_len) if (dev->buf_len) { aaa; } else { bbb; break; } to if (!dev->buf_len) { bbb; break; } aaa; Hence no functional changes. Signed-off-by: Felipe Balbi Reviewed-by : Santosh Shilimkar Signed-off-by: Shubhrajyoti D Signed-off-by: Wolfram Sang diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c index 236cb38..0dd647a 100644 --- a/drivers/i2c/busses/i2c-omap.c +++ b/drivers/i2c/busses/i2c-omap.c @@ -813,22 +813,7 @@ complete: >> 8) & 0x3F; } while (num_bytes--) { - w = omap_i2c_read_reg(dev, OMAP_I2C_DATA_REG); - if (dev->buf_len) { - *dev->buf++ = w; - dev->buf_len--; - /* - * Data reg in 2430, omap3 and - * omap4 is 8 bit wide - */ - if (dev->flags & - OMAP_I2C_FLAG_16BIT_DATA_REG) { - if (dev->buf_len) { - *dev->buf++ = w >> 8; - dev->buf_len--; - } - } - } else { + if (!dev->buf_len) { if (stat & OMAP_I2C_STAT_RRDY) dev_err(dev->dev, "RRDY IRQ while no data" @@ -839,6 +824,21 @@ complete: " requested\n"); break; } + + w = omap_i2c_read_reg(dev, OMAP_I2C_DATA_REG); + *dev->buf++ = w; + dev->buf_len--; + /* + * Data reg in 2430, omap3 and + * omap4 is 8 bit wide + */ + if (dev->flags & + OMAP_I2C_FLAG_16BIT_DATA_REG) { + if (dev->buf_len) { + *dev->buf++ = w >> 8; + dev->buf_len--; + } + } } omap_i2c_ack_stat(dev, stat & (OMAP_I2C_STAT_RRDY | OMAP_I2C_STAT_RDR)); @@ -855,22 +855,7 @@ complete: & 0x3F; } while (num_bytes--) { - w = 0; - if (dev->buf_len) { - w = *dev->buf++; - dev->buf_len--; - /* - * Data reg in 2430, omap3 and - * omap4 is 8 bit wide - */ - if (dev->flags & - OMAP_I2C_FLAG_16BIT_DATA_REG) { - if (dev->buf_len) { - w |= *dev->buf++ << 8; - dev->buf_len--; - } - } - } else { + if (!dev->buf_len) { if (stat & OMAP_I2C_STAT_XRDY) dev_err(dev->dev, "XRDY IRQ while no " @@ -882,6 +867,20 @@ complete: break; } + w = *dev->buf++; + dev->buf_len--; + /* + * Data reg in 2430, omap3 and + * omap4 is 8 bit wide + */ + if (dev->flags & + OMAP_I2C_FLAG_16BIT_DATA_REG) { + if (dev->buf_len) { + w |= *dev->buf++ << 8; + dev->buf_len--; + } + } + if ((dev->errata & I2C_OMAP_ERRATA_I462) && errata_omap3_i462(dev, &stat, &err)) goto complete; -- cgit v0.10.2 From c55edb99028f4d2cd5ad4700447451725835a7bc Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Wed, 12 Sep 2012 16:27:58 +0530 Subject: i2c: omap: add blank lines trivial patch to aid readability. No functional changes. Signed-off-by: Felipe Balbi Signed-off-by: Shubhrajyoti D Signed-off-by: Wolfram Sang diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c index 0dd647a..30ea63c 100644 --- a/drivers/i2c/busses/i2c-omap.c +++ b/drivers/i2c/busses/i2c-omap.c @@ -786,6 +786,7 @@ complete: dev_err(dev->dev, "Arbitration lost\n"); err |= OMAP_I2C_STAT_AL; } + /* * ProDB0017052: Clear ARDY bit twice */ @@ -798,6 +799,7 @@ complete: omap_i2c_complete_cmd(dev, err); return IRQ_HANDLED; } + if (stat & (OMAP_I2C_STAT_RRDY | OMAP_I2C_STAT_RDR)) { u8 num_bytes = 1; @@ -844,6 +846,7 @@ complete: stat & (OMAP_I2C_STAT_RRDY | OMAP_I2C_STAT_RDR)); continue; } + if (stat & (OMAP_I2C_STAT_XRDY | OMAP_I2C_STAT_XDR)) { u8 num_bytes = 1; if (dev->fifo_size) { @@ -891,10 +894,12 @@ complete: stat & (OMAP_I2C_STAT_XRDY | OMAP_I2C_STAT_XDR)); continue; } + if (stat & OMAP_I2C_STAT_ROVR) { dev_err(dev->dev, "Receive overrun\n"); dev->cmd_err |= OMAP_I2C_STAT_ROVR; } + if (stat & OMAP_I2C_STAT_XUDF) { dev_err(dev->dev, "Transmit underflow\n"); dev->cmd_err |= OMAP_I2C_STAT_XUDF; -- cgit v0.10.2 From 540a4790f7da0d3ca5ad9d726f198a5eb4db05ec Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Wed, 12 Sep 2012 16:27:59 +0530 Subject: i2c: omap: simplify omap_i2c_ack_stat() stat & BIT(1) is the same as BIT(1), so let's simplify things a bit by removing "stat &" from all omap_i2c_ack_stat() calls. Code snippet (extremely simplified): if (stat & NACK) { ... omap_i2c_ack_stat(dev, stat & NACK); } if (stat & RDR) { ... omap_i2c_ack_stat(dev, stat & RDR); } and so on. The tricky place is only WRT errata handling, for example: if (*stat & (NACK | AL)) { omap_i2c_ack_stat(dev, *stat & (XRDY | XDR)); ... } but in this case, the errata says we must clear XRDY and XDR if that errata triggers, so if they just got enabled or not, it doesn't matter. Another tricky place is RDR | RRDY (likewise for XDR | XRDY): if (stat & (RDR | RRDY)) { ... omap_i2c_ack_stat(dev, stat & (RDR | RRDY)); } again here there will be no issues because those IRQs never fire simultaneously and one will only after after we have handled the previous, that's because the same FIFO is used anyway and we won't shift data into FIFO until we tell the IP "hey, I'm done with the FIFO, you can shift more data" Signed-off-by: Felipe Balbi Reviewed-by : Santosh Shilimkar [Added the explaination from the discurssion to the commit logs] Signed-off-by: Shubhrajyoti D Signed-off-by: Wolfram Sang diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c index 30ea63c..f24eae9 100644 --- a/drivers/i2c/busses/i2c-omap.c +++ b/drivers/i2c/busses/i2c-omap.c @@ -731,7 +731,7 @@ static int errata_omap3_i462(struct omap_i2c_dev *dev, u16 *stat, int *err) while (--timeout && !(*stat & OMAP_I2C_STAT_XUDF)) { if (*stat & (OMAP_I2C_STAT_NACK | OMAP_I2C_STAT_AL)) { - omap_i2c_ack_stat(dev, *stat & (OMAP_I2C_STAT_XRDY | + omap_i2c_ack_stat(dev, (OMAP_I2C_STAT_XRDY | OMAP_I2C_STAT_XDR)); return -ETIMEDOUT; } @@ -792,10 +792,11 @@ complete: */ if (stat & (OMAP_I2C_STAT_ARDY | OMAP_I2C_STAT_NACK | OMAP_I2C_STAT_AL)) { - omap_i2c_ack_stat(dev, stat & - (OMAP_I2C_STAT_RRDY | OMAP_I2C_STAT_RDR | - OMAP_I2C_STAT_XRDY | OMAP_I2C_STAT_XDR | - OMAP_I2C_STAT_ARDY)); + omap_i2c_ack_stat(dev, (OMAP_I2C_STAT_RRDY | + OMAP_I2C_STAT_RDR | + OMAP_I2C_STAT_XRDY | + OMAP_I2C_STAT_XDR | + OMAP_I2C_STAT_ARDY)); omap_i2c_complete_cmd(dev, err); return IRQ_HANDLED; } @@ -842,8 +843,8 @@ complete: } } } - omap_i2c_ack_stat(dev, - stat & (OMAP_I2C_STAT_RRDY | OMAP_I2C_STAT_RDR)); + omap_i2c_ack_stat(dev, (OMAP_I2C_STAT_RRDY | + OMAP_I2C_STAT_RDR)); continue; } @@ -890,8 +891,8 @@ complete: omap_i2c_write_reg(dev, OMAP_I2C_DATA_REG, w); } - omap_i2c_ack_stat(dev, - stat & (OMAP_I2C_STAT_XRDY | OMAP_I2C_STAT_XDR)); + omap_i2c_ack_stat(dev, (OMAP_I2C_STAT_XRDY | + OMAP_I2C_STAT_XDR)); continue; } -- cgit v0.10.2 From 6d9939f651419a63e091105663821f9c7d3fec37 Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Wed, 12 Sep 2012 16:28:00 +0530 Subject: i2c: omap: split out [XR]DR and [XR]RDY While they do pretty much the same thing, there are a few peculiarities. Specially WRT erratas, it's best to split those out and re-factor the read/write loop to another function which both cases call. This last part will be done on another patch. While at that, also avoid an unncessary register read since dev->fifo_len will always contain the correct amount of data to be transferred. Signed-off-by: Felipe Balbi Signed-off-by: Shubhrajyoti D Signed-off-by: Wolfram Sang diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c index f24eae9..815577b 100644 --- a/drivers/i2c/busses/i2c-omap.c +++ b/drivers/i2c/busses/i2c-omap.c @@ -801,36 +801,62 @@ complete: return IRQ_HANDLED; } - if (stat & (OMAP_I2C_STAT_RRDY | OMAP_I2C_STAT_RDR)) { + if (stat & OMAP_I2C_STAT_RDR) { u8 num_bytes = 1; + if (dev->fifo_size) + num_bytes = dev->buf_len; + + while (num_bytes--) { + if (!dev->buf_len) { + dev_err(dev->dev, + "RDR IRQ while no data" + " requested\n"); + break; + } + + w = omap_i2c_read_reg(dev, OMAP_I2C_DATA_REG); + *dev->buf++ = w; + dev->buf_len--; + + /* + * Data reg in 2430, omap3 and + * omap4 is 8 bit wide + */ + if (dev->flags & + OMAP_I2C_FLAG_16BIT_DATA_REG) { + if (dev->buf_len) { + *dev->buf++ = w >> 8; + dev->buf_len--; + } + } + } + if (dev->errata & I2C_OMAP_ERRATA_I207) i2c_omap_errata_i207(dev, stat); - if (dev->fifo_size) { - if (stat & OMAP_I2C_STAT_RRDY) - num_bytes = dev->fifo_size; - else /* read RXSTAT on RDR interrupt */ - num_bytes = (omap_i2c_read_reg(dev, - OMAP_I2C_BUFSTAT_REG) - >> 8) & 0x3F; - } + omap_i2c_ack_stat(dev, OMAP_I2C_STAT_RDR); + continue; + } + + if (stat & OMAP_I2C_STAT_RRDY) { + u8 num_bytes = 1; + + if (dev->fifo_size) + num_bytes = dev->fifo_size; + while (num_bytes--) { if (!dev->buf_len) { - if (stat & OMAP_I2C_STAT_RRDY) - dev_err(dev->dev, + dev_err(dev->dev, "RRDY IRQ while no data" - " requested\n"); - if (stat & OMAP_I2C_STAT_RDR) - dev_err(dev->dev, - "RDR IRQ while no data" - " requested\n"); + " requested\n"); break; } w = omap_i2c_read_reg(dev, OMAP_I2C_DATA_REG); *dev->buf++ = w; dev->buf_len--; + /* * Data reg in 2430, omap3 and * omap4 is 8 bit wide @@ -843,36 +869,68 @@ complete: } } } - omap_i2c_ack_stat(dev, (OMAP_I2C_STAT_RRDY | - OMAP_I2C_STAT_RDR)); + + omap_i2c_ack_stat(dev, OMAP_I2C_STAT_RRDY); continue; } - if (stat & (OMAP_I2C_STAT_XRDY | OMAP_I2C_STAT_XDR)) { + if (stat & OMAP_I2C_STAT_XDR) { u8 num_bytes = 1; - if (dev->fifo_size) { - if (stat & OMAP_I2C_STAT_XRDY) - num_bytes = dev->fifo_size; - else /* read TXSTAT on XDR interrupt */ - num_bytes = omap_i2c_read_reg(dev, - OMAP_I2C_BUFSTAT_REG) - & 0x3F; + + if (dev->fifo_size) + num_bytes = dev->buf_len; + + while (num_bytes--) { + if (!dev->buf_len) { + dev_err(dev->dev, + "XDR IRQ while no " + "data to send\n"); + break; + } + + w = *dev->buf++; + dev->buf_len--; + + /* + * Data reg in 2430, omap3 and + * omap4 is 8 bit wide + */ + if (dev->flags & + OMAP_I2C_FLAG_16BIT_DATA_REG) { + if (dev->buf_len) { + w |= *dev->buf++ << 8; + dev->buf_len--; + } + } + + if ((dev->errata & I2C_OMAP_ERRATA_I462) && + errata_omap3_i462(dev, &stat, &err)) + goto complete; + + omap_i2c_write_reg(dev, OMAP_I2C_DATA_REG, w); } + + omap_i2c_ack_stat(dev, OMAP_I2C_STAT_XDR); + continue; + } + + if (stat & OMAP_I2C_STAT_XRDY) { + u8 num_bytes = 1; + + if (dev->fifo_size) + num_bytes = dev->fifo_size; + while (num_bytes--) { if (!dev->buf_len) { - if (stat & OMAP_I2C_STAT_XRDY) - dev_err(dev->dev, + dev_err(dev->dev, "XRDY IRQ while no " "data to send\n"); - if (stat & OMAP_I2C_STAT_XDR) - dev_err(dev->dev, - "XDR IRQ while no " - "data to send\n"); break; } w = *dev->buf++; dev->buf_len--; + /* * Data reg in 2430, omap3 and * omap4 is 8 bit wide @@ -891,8 +949,8 @@ complete: omap_i2c_write_reg(dev, OMAP_I2C_DATA_REG, w); } - omap_i2c_ack_stat(dev, (OMAP_I2C_STAT_XRDY | - OMAP_I2C_STAT_XDR)); + + omap_i2c_ack_stat(dev, OMAP_I2C_STAT_XRDY); continue; } -- cgit v0.10.2 From 4151e74177b68c40079d8fe98f2fda4b9792a998 Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Wed, 12 Sep 2012 16:28:01 +0530 Subject: i2c: omap: improve i462 errata handling Make it not depend on ISR's local variables in order to make it easier to re-factor the transmit data loop. Also since we are waiting for XUDF(Transmitter underflow) just before writing data lets not flag the underflow. This is anyways going to go once we write the data. Signed-off-by: Felipe Balbi Signed-off-by: Shubhrajyoti D Signed-off-by: Wolfram Sang diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c index 815577b..fb57221 100644 --- a/drivers/i2c/busses/i2c-omap.c +++ b/drivers/i2c/busses/i2c-omap.c @@ -725,27 +725,30 @@ omap_i2c_omap1_isr(int this_irq, void *dev_id) * data to DATA_REG. Otherwise some data bytes can be lost while transferring * them from the memory to the I2C interface. */ -static int errata_omap3_i462(struct omap_i2c_dev *dev, u16 *stat, int *err) +static int errata_omap3_i462(struct omap_i2c_dev *dev) { unsigned long timeout = 10000; + u16 stat; - while (--timeout && !(*stat & OMAP_I2C_STAT_XUDF)) { - if (*stat & (OMAP_I2C_STAT_NACK | OMAP_I2C_STAT_AL)) { + do { + stat = omap_i2c_read_reg(dev, OMAP_I2C_STAT_REG); + if (stat & OMAP_I2C_STAT_XUDF) + break; + + if (stat & (OMAP_I2C_STAT_NACK | OMAP_I2C_STAT_AL)) { omap_i2c_ack_stat(dev, (OMAP_I2C_STAT_XRDY | OMAP_I2C_STAT_XDR)); - return -ETIMEDOUT; + return -EIO; } cpu_relax(); - *stat = omap_i2c_read_reg(dev, OMAP_I2C_STAT_REG); - } + } while (--timeout); if (!timeout) { dev_err(dev->dev, "timeout waiting on XUDF bit\n"); return 0; } - *err |= OMAP_I2C_STAT_XUDF; return 0; } @@ -903,9 +906,16 @@ complete: } } - if ((dev->errata & I2C_OMAP_ERRATA_I462) && - errata_omap3_i462(dev, &stat, &err)) - goto complete; + if (dev->errata & I2C_OMAP_ERRATA_I462) { + int ret; + + ret = errata_omap3_i462(dev); + stat = omap_i2c_read_reg(dev, + OMAP_I2C_STAT_REG); + + if (ret < 0) + goto complete; + } omap_i2c_write_reg(dev, OMAP_I2C_DATA_REG, w); } @@ -943,9 +953,16 @@ complete: } } - if ((dev->errata & I2C_OMAP_ERRATA_I462) && - errata_omap3_i462(dev, &stat, &err)) - goto complete; + if (dev->errata & I2C_OMAP_ERRATA_I462) { + int ret; + + ret = errata_omap3_i462(dev); + stat = omap_i2c_read_reg(dev, + OMAP_I2C_STAT_REG); + + if (ret < 0) + goto complete; + } omap_i2c_write_reg(dev, OMAP_I2C_DATA_REG, w); } -- cgit v0.10.2 From 3312d25e1abdc41be8a75a1b2c3ccaa39a14ed99 Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Wed, 12 Sep 2012 16:28:02 +0530 Subject: i2c: omap: re-factor receive/transmit data loop re-factor the common parts to a separate function, so that code is easier to read and understand. No functional changes. Signed-off-by: Felipe Balbi Signed-off-by: Shubhrajyoti D Signed-off-by: Wolfram Sang diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c index fb57221..2c7d7cc 100644 --- a/drivers/i2c/busses/i2c-omap.c +++ b/drivers/i2c/busses/i2c-omap.c @@ -752,12 +752,81 @@ static int errata_omap3_i462(struct omap_i2c_dev *dev) return 0; } +static void omap_i2c_receive_data(struct omap_i2c_dev *dev, u8 num_bytes, + bool is_rdr) +{ + u16 w; + + while (num_bytes--) { + if (!dev->buf_len) { + dev_err(dev->dev, "%s without data", + is_rdr ? "RDR" : "RRDY"); + break; + } + + w = omap_i2c_read_reg(dev, OMAP_I2C_DATA_REG); + *dev->buf++ = w; + dev->buf_len--; + + /* + * Data reg in 2430, omap3 and + * omap4 is 8 bit wide + */ + if (dev->flags & OMAP_I2C_FLAG_16BIT_DATA_REG) { + if (dev->buf_len) { + *dev->buf++ = w >> 8; + dev->buf_len--; + } + } + } +} + +static int omap_i2c_transmit_data(struct omap_i2c_dev *dev, u8 num_bytes, + bool is_xdr) +{ + u16 w; + + while (num_bytes--) { + if (!dev->buf_len) { + dev_err(dev->dev, "%s without data", + is_xdr ? "XDR" : "XRDY"); + break; + } + + w = *dev->buf++; + dev->buf_len--; + + /* + * Data reg in 2430, omap3 and + * omap4 is 8 bit wide + */ + if (dev->flags & OMAP_I2C_FLAG_16BIT_DATA_REG) { + if (dev->buf_len) { + w |= *dev->buf++ << 8; + dev->buf_len--; + } + } + + if (dev->errata & I2C_OMAP_ERRATA_I462) { + int ret; + + ret = errata_omap3_i462(dev); + if (ret < 0) + return ret; + } + + omap_i2c_write_reg(dev, OMAP_I2C_DATA_REG, w); + } + + return 0; +} + static irqreturn_t omap_i2c_isr(int this_irq, void *dev_id) { struct omap_i2c_dev *dev = dev_id; u16 bits; - u16 stat, w; + u16 stat; int err, count = 0; if (pm_runtime_suspended(dev->dev)) @@ -810,30 +879,7 @@ complete: if (dev->fifo_size) num_bytes = dev->buf_len; - while (num_bytes--) { - if (!dev->buf_len) { - dev_err(dev->dev, - "RDR IRQ while no data" - " requested\n"); - break; - } - - w = omap_i2c_read_reg(dev, OMAP_I2C_DATA_REG); - *dev->buf++ = w; - dev->buf_len--; - - /* - * Data reg in 2430, omap3 and - * omap4 is 8 bit wide - */ - if (dev->flags & - OMAP_I2C_FLAG_16BIT_DATA_REG) { - if (dev->buf_len) { - *dev->buf++ = w >> 8; - dev->buf_len--; - } - } - } + omap_i2c_receive_data(dev, num_bytes, true); if (dev->errata & I2C_OMAP_ERRATA_I207) i2c_omap_errata_i207(dev, stat); @@ -848,77 +894,22 @@ complete: if (dev->fifo_size) num_bytes = dev->fifo_size; - while (num_bytes--) { - if (!dev->buf_len) { - dev_err(dev->dev, - "RRDY IRQ while no data" - " requested\n"); - break; - } - - w = omap_i2c_read_reg(dev, OMAP_I2C_DATA_REG); - *dev->buf++ = w; - dev->buf_len--; - - /* - * Data reg in 2430, omap3 and - * omap4 is 8 bit wide - */ - if (dev->flags & - OMAP_I2C_FLAG_16BIT_DATA_REG) { - if (dev->buf_len) { - *dev->buf++ = w >> 8; - dev->buf_len--; - } - } - } - + omap_i2c_receive_data(dev, num_bytes, false); omap_i2c_ack_stat(dev, OMAP_I2C_STAT_RRDY); continue; } if (stat & OMAP_I2C_STAT_XDR) { u8 num_bytes = 1; + int ret; if (dev->fifo_size) num_bytes = dev->buf_len; - while (num_bytes--) { - if (!dev->buf_len) { - dev_err(dev->dev, - "XDR IRQ while no " - "data to send\n"); - break; - } - - w = *dev->buf++; - dev->buf_len--; - - /* - * Data reg in 2430, omap3 and - * omap4 is 8 bit wide - */ - if (dev->flags & - OMAP_I2C_FLAG_16BIT_DATA_REG) { - if (dev->buf_len) { - w |= *dev->buf++ << 8; - dev->buf_len--; - } - } - - if (dev->errata & I2C_OMAP_ERRATA_I462) { - int ret; - - ret = errata_omap3_i462(dev); - stat = omap_i2c_read_reg(dev, - OMAP_I2C_STAT_REG); - - if (ret < 0) - goto complete; - } - - omap_i2c_write_reg(dev, OMAP_I2C_DATA_REG, w); - } + ret = omap_i2c_transmit_data(dev, num_bytes, true); + stat = omap_i2c_read_reg(dev, OMAP_I2C_STAT_REG); + if (ret < 0) + goto complete; omap_i2c_ack_stat(dev, OMAP_I2C_STAT_XDR); continue; @@ -926,46 +917,15 @@ complete: if (stat & OMAP_I2C_STAT_XRDY) { u8 num_bytes = 1; + int ret; if (dev->fifo_size) num_bytes = dev->fifo_size; - while (num_bytes--) { - if (!dev->buf_len) { - dev_err(dev->dev, - "XRDY IRQ while no " - "data to send\n"); - break; - } - - w = *dev->buf++; - dev->buf_len--; - - /* - * Data reg in 2430, omap3 and - * omap4 is 8 bit wide - */ - if (dev->flags & - OMAP_I2C_FLAG_16BIT_DATA_REG) { - if (dev->buf_len) { - w |= *dev->buf++ << 8; - dev->buf_len--; - } - } - - if (dev->errata & I2C_OMAP_ERRATA_I462) { - int ret; - - ret = errata_omap3_i462(dev); - stat = omap_i2c_read_reg(dev, - OMAP_I2C_STAT_REG); - - if (ret < 0) - goto complete; - } - - omap_i2c_write_reg(dev, OMAP_I2C_DATA_REG, w); - } + ret = omap_i2c_transmit_data(dev, num_bytes, false); + stat = omap_i2c_read_reg(dev, OMAP_I2C_STAT_REG); + if (ret < 0) + goto complete; omap_i2c_ack_stat(dev, OMAP_I2C_STAT_XRDY); continue; -- cgit v0.10.2 From 66b9298878742f08cb6e79b7c7d5632d782fd1e1 Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Wed, 12 Sep 2012 16:28:03 +0530 Subject: i2c: omap: switch over to do {} while loop this will make sure that we execute at least once. No functional changes otherwise. Signed-off-by: Felipe Balbi Signed-off-by: Shubhrajyoti D Signed-off-by: Wolfram Sang diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c index 2c7d7cc..4045134 100644 --- a/drivers/i2c/busses/i2c-omap.c +++ b/drivers/i2c/busses/i2c-omap.c @@ -827,20 +827,28 @@ omap_i2c_isr(int this_irq, void *dev_id) struct omap_i2c_dev *dev = dev_id; u16 bits; u16 stat; - int err, count = 0; + int err = 0, count = 0; if (pm_runtime_suspended(dev->dev)) return IRQ_NONE; - bits = omap_i2c_read_reg(dev, OMAP_I2C_IE_REG); - while ((stat = (omap_i2c_read_reg(dev, OMAP_I2C_STAT_REG))) & bits) { + do { + bits = omap_i2c_read_reg(dev, OMAP_I2C_IE_REG); + stat = omap_i2c_read_reg(dev, OMAP_I2C_STAT_REG); + stat &= bits; + + if (!stat) { + /* my work here is done */ + return IRQ_HANDLED; + } + dev_dbg(dev->dev, "IRQ (ISR = 0x%04x)\n", stat); if (count++ == 100) { dev_warn(dev->dev, "Too much work in one IRQ\n"); - break; + omap_i2c_complete_cmd(dev, err); + return IRQ_HANDLED; } - err = 0; complete: /* * Ack the stat in one go, but [R/X]DR and [R/X]RDY should be @@ -940,7 +948,7 @@ complete: dev_err(dev->dev, "Transmit underflow\n"); dev->cmd_err |= OMAP_I2C_STAT_XUDF; } - } + } while (stat); return count ? IRQ_HANDLED : IRQ_NONE; } -- cgit v0.10.2 From 1d7afc95946487945cc7f5019b41255b72224b70 Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Wed, 12 Sep 2012 16:28:04 +0530 Subject: i2c: omap: ack IRQ in parts According to flow diagrams on OMAP TRMs, we should ACK the IRQ as they happen. Signed-off-by: Felipe Balbi [Ack the stat OMAP_I2C_STAT_AL in case of arbitration lost] Signed-off-by: Shubhrajyoti D Signed-off-by: Wolfram Sang diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c index 4045134..bac1f11 100644 --- a/drivers/i2c/busses/i2c-omap.c +++ b/drivers/i2c/busses/i2c-omap.c @@ -850,21 +850,19 @@ omap_i2c_isr(int this_irq, void *dev_id) } complete: - /* - * Ack the stat in one go, but [R/X]DR and [R/X]RDY should be - * acked after the data operation is complete. - * Ref: TRM SWPU114Q Figure 18-31 - */ - omap_i2c_write_reg(dev, OMAP_I2C_STAT_REG, stat & - ~(OMAP_I2C_STAT_RRDY | OMAP_I2C_STAT_RDR | - OMAP_I2C_STAT_XRDY | OMAP_I2C_STAT_XDR)); - - if (stat & OMAP_I2C_STAT_NACK) + if (stat & OMAP_I2C_STAT_NACK) { err |= OMAP_I2C_STAT_NACK; + omap_i2c_ack_stat(dev, OMAP_I2C_STAT_NACK); + omap_i2c_complete_cmd(dev, err); + return IRQ_HANDLED; + } if (stat & OMAP_I2C_STAT_AL) { dev_err(dev->dev, "Arbitration lost\n"); err |= OMAP_I2C_STAT_AL; + omap_i2c_ack_stat(dev, OMAP_I2C_STAT_AL); + omap_i2c_complete_cmd(dev, err); + return IRQ_HANDLED; } /* @@ -941,12 +939,18 @@ complete: if (stat & OMAP_I2C_STAT_ROVR) { dev_err(dev->dev, "Receive overrun\n"); - dev->cmd_err |= OMAP_I2C_STAT_ROVR; + err |= OMAP_I2C_STAT_ROVR; + omap_i2c_ack_stat(dev, OMAP_I2C_STAT_ROVR); + omap_i2c_complete_cmd(dev, err); + return IRQ_HANDLED; } if (stat & OMAP_I2C_STAT_XUDF) { dev_err(dev->dev, "Transmit underflow\n"); - dev->cmd_err |= OMAP_I2C_STAT_XUDF; + err |= OMAP_I2C_STAT_XUDF; + omap_i2c_ack_stat(dev, OMAP_I2C_STAT_XUDF); + omap_i2c_complete_cmd(dev, err); + return IRQ_HANDLED; } } while (stat); -- cgit v0.10.2 From ac79e4b24972c69debef90a5e16b145e59222388 Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Wed, 12 Sep 2012 16:28:05 +0530 Subject: i2c: omap: switch to platform_get_irq() that's a nice helper from drivers core which will give us the exact IRQ number, instead of a pointer to an IRQ resource. Signed-off-by: Felipe Balbi Signed-off-by: Shubhrajyoti D Signed-off-by: Wolfram Sang diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c index bac1f11..0da8169 100644 --- a/drivers/i2c/busses/i2c-omap.c +++ b/drivers/i2c/busses/i2c-omap.c @@ -993,11 +993,12 @@ omap_i2c_probe(struct platform_device *pdev) { struct omap_i2c_dev *dev; struct i2c_adapter *adap; - struct resource *mem, *irq; + struct resource *mem; struct omap_i2c_bus_platform_data *pdata = pdev->dev.platform_data; struct device_node *node = pdev->dev.of_node; const struct of_device_id *match; irq_handler_t isr; + int irq; int r; /* NOTE: driver uses the static register mapping */ @@ -1006,10 +1007,11 @@ omap_i2c_probe(struct platform_device *pdev) dev_err(&pdev->dev, "no mem resource?\n"); return -ENODEV; } - irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0); - if (!irq) { + + irq = platform_get_irq(pdev, 0); + if (irq < 0) { dev_err(&pdev->dev, "no irq resource?\n"); - return -ENODEV; + return irq; } dev = devm_kzalloc(&pdev->dev, sizeof(struct omap_i2c_dev), GFP_KERNEL); @@ -1043,7 +1045,7 @@ omap_i2c_probe(struct platform_device *pdev) } dev->dev = &pdev->dev; - dev->irq = irq->start; + dev->irq = irq; platform_set_drvdata(pdev, dev); init_completion(&dev->cmd_complete); -- cgit v0.10.2 From 079d8af24b948261e1dae5d7df6b31b7bf205cb4 Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Wed, 12 Sep 2012 16:28:06 +0530 Subject: i2c: omap: bus: add a receiver flag that way we can ignore TX IRQs while in receiver mode and ignore RX IRQs while in transmitter mode. Signed-off-by: Felipe Balbi [Remove unnecessary braces] Signed-off-by: Shubhrajyoti D Signed-off-by: Wolfram Sang diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c index 0da8169..3be147a 100644 --- a/drivers/i2c/busses/i2c-omap.c +++ b/drivers/i2c/busses/i2c-omap.c @@ -199,6 +199,7 @@ struct omap_i2c_dev { */ u8 rev; unsigned b_hw:1; /* bad h/w fixes */ + unsigned receiver:1; /* true when we're in receiver mode */ u16 iestate; /* Saved interrupt register */ u16 pscstate; u16 scllstate; @@ -492,6 +493,7 @@ static int omap_i2c_xfer_msg(struct i2c_adapter *adap, INIT_COMPLETION(dev->cmd_complete); dev->cmd_err = 0; + dev->receiver = !!(msg->flags & I2C_M_RD); w = OMAP_I2C_CON_EN | OMAP_I2C_CON_MST | OMAP_I2C_CON_STT; @@ -837,6 +839,12 @@ omap_i2c_isr(int this_irq, void *dev_id) stat = omap_i2c_read_reg(dev, OMAP_I2C_STAT_REG); stat &= bits; + /* If we're in receiver mode, ignore XDR/XRDY */ + if (dev->receiver) + stat &= ~(OMAP_I2C_STAT_XDR | OMAP_I2C_STAT_XRDY); + else + stat &= ~(OMAP_I2C_STAT_RDR | OMAP_I2C_STAT_RRDY); + if (!stat) { /* my work here is done */ return IRQ_HANDLED; -- cgit v0.10.2 From 3ff4443f888207359a561db60a9cb96aa136b8f3 Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Wed, 12 Sep 2012 16:28:07 +0530 Subject: i2c: omap: simplify errata check omap_i2c_dev is allocated with kzalloc(), so we need not initialize b_hw to zero. Signed-off-by: Felipe Balbi Signed-off-by: Shubhrajyoti D Signed-off-by: Wolfram Sang diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c index 3be147a..7918e48 100644 --- a/drivers/i2c/busses/i2c-omap.c +++ b/drivers/i2c/busses/i2c-omap.c @@ -1095,9 +1095,7 @@ omap_i2c_probe(struct platform_device *pdev) dev->fifo_size = (dev->fifo_size / 2); - if (dev->rev >= OMAP_I2C_REV_ON_3630_4430) - dev->b_hw = 0; /* Disable hardware fixes */ - else + if (dev->rev < OMAP_I2C_REV_ON_3630_4430) dev->b_hw = 1; /* Enable hardware fixes */ /* calculate wakeup latency constraint for MPU */ -- cgit v0.10.2 From 6a85ced2cf299b916c04499b2c3d7b353cc2101f Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Wed, 12 Sep 2012 16:28:08 +0530 Subject: i2c: omap: always return IRQ_HANDLED Always return IRQ_HANDLED otherwise we could get our IRQ line disabled due to many spurious IRQs. Signed-off-by: Felipe Balbi [Trivial changes to commitlogs] Signed-off-by: Shubhrajyoti D Signed-off-by: Wolfram Sang diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c index 7918e48..96fd528 100644 --- a/drivers/i2c/busses/i2c-omap.c +++ b/drivers/i2c/busses/i2c-omap.c @@ -962,7 +962,7 @@ complete: } } while (stat); - return count ? IRQ_HANDLED : IRQ_NONE; + return IRQ_HANDLED; } static const struct i2c_algorithm omap_i2c_algo = { -- cgit v0.10.2 From 4a7ec4eda58269a507501f240955d99312fdfd5f Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Wed, 12 Sep 2012 16:28:09 +0530 Subject: i2c: omap: simplify IRQ exit path instead of having multiple return points, use a goto statement to make that clearer. Signed-off-by: Felipe Balbi Signed-off-by: Shubhrajyoti D Signed-off-by: Wolfram Sang diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c index 96fd528..4af123f 100644 --- a/drivers/i2c/busses/i2c-omap.c +++ b/drivers/i2c/busses/i2c-omap.c @@ -853,24 +853,21 @@ omap_i2c_isr(int this_irq, void *dev_id) dev_dbg(dev->dev, "IRQ (ISR = 0x%04x)\n", stat); if (count++ == 100) { dev_warn(dev->dev, "Too much work in one IRQ\n"); - omap_i2c_complete_cmd(dev, err); - return IRQ_HANDLED; + goto out; } complete: if (stat & OMAP_I2C_STAT_NACK) { err |= OMAP_I2C_STAT_NACK; omap_i2c_ack_stat(dev, OMAP_I2C_STAT_NACK); - omap_i2c_complete_cmd(dev, err); - return IRQ_HANDLED; + goto out; } if (stat & OMAP_I2C_STAT_AL) { dev_err(dev->dev, "Arbitration lost\n"); err |= OMAP_I2C_STAT_AL; omap_i2c_ack_stat(dev, OMAP_I2C_STAT_AL); - omap_i2c_complete_cmd(dev, err); - return IRQ_HANDLED; + goto out; } /* @@ -883,8 +880,7 @@ complete: OMAP_I2C_STAT_XRDY | OMAP_I2C_STAT_XDR | OMAP_I2C_STAT_ARDY)); - omap_i2c_complete_cmd(dev, err); - return IRQ_HANDLED; + goto out; } if (stat & OMAP_I2C_STAT_RDR) { @@ -949,19 +945,19 @@ complete: dev_err(dev->dev, "Receive overrun\n"); err |= OMAP_I2C_STAT_ROVR; omap_i2c_ack_stat(dev, OMAP_I2C_STAT_ROVR); - omap_i2c_complete_cmd(dev, err); - return IRQ_HANDLED; + goto out; } if (stat & OMAP_I2C_STAT_XUDF) { dev_err(dev->dev, "Transmit underflow\n"); err |= OMAP_I2C_STAT_XUDF; omap_i2c_ack_stat(dev, OMAP_I2C_STAT_XUDF); - omap_i2c_complete_cmd(dev, err); - return IRQ_HANDLED; + goto out; } } while (stat); +out: + omap_i2c_complete_cmd(dev, err); return IRQ_HANDLED; } -- cgit v0.10.2 From dd74548ddece4b9d68e5528287a272fa552c81d0 Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Wed, 12 Sep 2012 16:28:10 +0530 Subject: i2c: omap: resize fifos before each message This patch will try to avoid the usage of draining feature by reconfiguring the FIFO the start condition of each message based on the message's size. By doing that, we will be better utilizing the FIFO when doing big transfers. While at that also drop the now unneeded check for dev->buf_len as we always know the amount of data to be transmitted. Signed-off-by: Felipe Balbi Signed-off-by: Shubhrajyoti D Signed-off-by: Wolfram Sang diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c index 4af123f..f33bc5a 100644 --- a/drivers/i2c/busses/i2c-omap.c +++ b/drivers/i2c/busses/i2c-omap.c @@ -193,6 +193,7 @@ struct omap_i2c_dev { u8 *regs; size_t buf_len; struct i2c_adapter adapter; + u8 threshold; u8 fifo_size; /* use as flag and value * fifo_size==0 implies no fifo * if set, should be trsh+1 @@ -418,13 +419,6 @@ static int omap_i2c_init(struct omap_i2c_dev *dev) omap_i2c_write_reg(dev, OMAP_I2C_SCLL_REG, scll); omap_i2c_write_reg(dev, OMAP_I2C_SCLH_REG, sclh); - if (dev->fifo_size) { - /* Note: setup required fifo size - 1. RTRSH and XTRSH */ - buf = (dev->fifo_size - 1) << 8 | OMAP_I2C_BUF_RXFIF_CLR | - (dev->fifo_size - 1) | OMAP_I2C_BUF_TXFIF_CLR; - omap_i2c_write_reg(dev, OMAP_I2C_BUF_REG, buf); - } - /* Take the I2C module out of reset: */ omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, OMAP_I2C_CON_EN); @@ -462,6 +456,45 @@ static int omap_i2c_wait_for_bb(struct omap_i2c_dev *dev) return 0; } +static void omap_i2c_resize_fifo(struct omap_i2c_dev *dev, u8 size, bool is_rx) +{ + u16 buf; + + if (dev->flags & OMAP_I2C_FLAG_NO_FIFO) + return; + + /* + * Set up notification threshold based on message size. We're doing + * this to try and avoid draining feature as much as possible. Whenever + * we have big messages to transfer (bigger than our total fifo size) + * then we might use draining feature to transfer the remaining bytes. + */ + + dev->threshold = clamp(size, (u8) 1, dev->fifo_size); + + buf = omap_i2c_read_reg(dev, OMAP_I2C_BUF_REG); + + if (is_rx) { + /* Clear RX Threshold */ + buf &= ~(0x3f << 8); + buf |= ((dev->threshold - 1) << 8) | OMAP_I2C_BUF_RXFIF_CLR; + } else { + /* Clear TX Threshold */ + buf &= ~0x3f; + buf |= (dev->threshold - 1) | OMAP_I2C_BUF_TXFIF_CLR; + } + + omap_i2c_write_reg(dev, OMAP_I2C_BUF_REG, buf); + + if (dev->rev < OMAP_I2C_REV_ON_3630_4430) + dev->b_hw = 1; /* Enable hardware fixes */ + + /* calculate wakeup latency constraint for MPU */ + if (dev->set_mpu_wkup_lat != NULL) + dev->latency = (1000000 * dev->threshold) / + (1000 * dev->speed / 8); +} + /* * Low level master read/write transaction. */ @@ -478,6 +511,9 @@ static int omap_i2c_xfer_msg(struct i2c_adapter *adap, if (msg->len == 0) return -EINVAL; + dev->receiver = !!(msg->flags & I2C_M_RD); + omap_i2c_resize_fifo(dev, msg->len, dev->receiver); + omap_i2c_write_reg(dev, OMAP_I2C_SA_REG, msg->addr); /* REVISIT: Could the STB bit of I2C_CON be used with probing? */ @@ -493,7 +529,6 @@ static int omap_i2c_xfer_msg(struct i2c_adapter *adap, INIT_COMPLETION(dev->cmd_complete); dev->cmd_err = 0; - dev->receiver = !!(msg->flags & I2C_M_RD); w = OMAP_I2C_CON_EN | OMAP_I2C_CON_MST | OMAP_I2C_CON_STT; @@ -760,12 +795,6 @@ static void omap_i2c_receive_data(struct omap_i2c_dev *dev, u8 num_bytes, u16 w; while (num_bytes--) { - if (!dev->buf_len) { - dev_err(dev->dev, "%s without data", - is_rdr ? "RDR" : "RRDY"); - break; - } - w = omap_i2c_read_reg(dev, OMAP_I2C_DATA_REG); *dev->buf++ = w; dev->buf_len--; @@ -775,10 +804,8 @@ static void omap_i2c_receive_data(struct omap_i2c_dev *dev, u8 num_bytes, * omap4 is 8 bit wide */ if (dev->flags & OMAP_I2C_FLAG_16BIT_DATA_REG) { - if (dev->buf_len) { - *dev->buf++ = w >> 8; - dev->buf_len--; - } + *dev->buf++ = w >> 8; + dev->buf_len--; } } } @@ -789,12 +816,6 @@ static int omap_i2c_transmit_data(struct omap_i2c_dev *dev, u8 num_bytes, u16 w; while (num_bytes--) { - if (!dev->buf_len) { - dev_err(dev->dev, "%s without data", - is_xdr ? "XDR" : "XRDY"); - break; - } - w = *dev->buf++; dev->buf_len--; @@ -803,10 +824,8 @@ static int omap_i2c_transmit_data(struct omap_i2c_dev *dev, u8 num_bytes, * omap4 is 8 bit wide */ if (dev->flags & OMAP_I2C_FLAG_16BIT_DATA_REG) { - if (dev->buf_len) { - w |= *dev->buf++ << 8; - dev->buf_len--; - } + w |= *dev->buf++ << 8; + dev->buf_len--; } if (dev->errata & I2C_OMAP_ERRATA_I462) { @@ -901,8 +920,8 @@ complete: if (stat & OMAP_I2C_STAT_RRDY) { u8 num_bytes = 1; - if (dev->fifo_size) - num_bytes = dev->fifo_size; + if (dev->threshold) + num_bytes = dev->threshold; omap_i2c_receive_data(dev, num_bytes, false); omap_i2c_ack_stat(dev, OMAP_I2C_STAT_RRDY); @@ -929,8 +948,8 @@ complete: u8 num_bytes = 1; int ret; - if (dev->fifo_size) - num_bytes = dev->fifo_size; + if (dev->threshold) + num_bytes = dev->threshold; ret = omap_i2c_transmit_data(dev, num_bytes, false); stat = omap_i2c_read_reg(dev, OMAP_I2C_STAT_REG); -- cgit v0.10.2 From b07be0f3b9e1bed6cbd29117d7f0519d114fbd82 Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Wed, 12 Sep 2012 16:28:11 +0530 Subject: i2c: omap: get rid of the "complete" label we can ack stat and complete the command from the errata handling itself. Signed-off-by: Felipe Balbi Signed-off-by: Shubhrajyoti D Signed-off-by: Wolfram Sang diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c index f33bc5a..5d4bad4 100644 --- a/drivers/i2c/busses/i2c-omap.c +++ b/drivers/i2c/busses/i2c-omap.c @@ -775,6 +775,17 @@ static int errata_omap3_i462(struct omap_i2c_dev *dev) if (stat & (OMAP_I2C_STAT_NACK | OMAP_I2C_STAT_AL)) { omap_i2c_ack_stat(dev, (OMAP_I2C_STAT_XRDY | OMAP_I2C_STAT_XDR)); + if (stat & OMAP_I2C_STAT_NACK) { + dev->cmd_err |= OMAP_I2C_STAT_NACK; + omap_i2c_ack_stat(dev, OMAP_I2C_STAT_NACK); + } + + if (stat & OMAP_I2C_STAT_AL) { + dev_err(dev->dev, "Arbitration lost\n"); + dev->cmd_err |= OMAP_I2C_STAT_AL; + omap_i2c_ack_stat(dev, OMAP_I2C_STAT_NACK); + } + return -EIO; } @@ -875,7 +886,6 @@ omap_i2c_isr(int this_irq, void *dev_id) goto out; } -complete: if (stat & OMAP_I2C_STAT_NACK) { err |= OMAP_I2C_STAT_NACK; omap_i2c_ack_stat(dev, OMAP_I2C_STAT_NACK); @@ -938,7 +948,7 @@ complete: ret = omap_i2c_transmit_data(dev, num_bytes, true); stat = omap_i2c_read_reg(dev, OMAP_I2C_STAT_REG); if (ret < 0) - goto complete; + goto out; omap_i2c_ack_stat(dev, OMAP_I2C_STAT_XDR); continue; @@ -954,7 +964,7 @@ complete: ret = omap_i2c_transmit_data(dev, num_bytes, false); stat = omap_i2c_read_reg(dev, OMAP_I2C_STAT_REG); if (ret < 0) - goto complete; + goto out; omap_i2c_ack_stat(dev, OMAP_I2C_STAT_XRDY); continue; -- cgit v0.10.2 From d741d0c792bda4761fd3f0089e7b0d34e99acbff Mon Sep 17 00:00:00 2001 From: Shubhrajyoti D Date: Wed, 12 Sep 2012 16:28:12 +0530 Subject: i2c: omap: remove redundant status read Currently omap_i2c_ack_stat doesn't use the stat variable. After the read of the I2C_STAT_REG it is not used. Remove the redundant read of the status register. Signed-off-by: Shubhrajyoti D Signed-off-by: Wolfram Sang diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c index 5d4bad4..498a462 100644 --- a/drivers/i2c/busses/i2c-omap.c +++ b/drivers/i2c/busses/i2c-omap.c @@ -946,7 +946,6 @@ omap_i2c_isr(int this_irq, void *dev_id) num_bytes = dev->buf_len; ret = omap_i2c_transmit_data(dev, num_bytes, true); - stat = omap_i2c_read_reg(dev, OMAP_I2C_STAT_REG); if (ret < 0) goto out; @@ -962,7 +961,6 @@ omap_i2c_isr(int this_irq, void *dev_id) num_bytes = dev->threshold; ret = omap_i2c_transmit_data(dev, num_bytes, false); - stat = omap_i2c_read_reg(dev, OMAP_I2C_STAT_REG); if (ret < 0) goto out; -- cgit v0.10.2 From 3b2f8f82dad7d1f79cdc8fc05bd1c94baf109bde Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Wed, 12 Sep 2012 16:28:13 +0530 Subject: i2c: omap: switch to threaded IRQ support for OMAP2, we can easily switch over to threaded IRQs on the I2C driver. This will allow us to spend less time in hardirq context. Signed-off-by: Felipe Balbi [Trivial formating changes] Signed-off-by: Shubhrajyoti D Signed-off-by: Wolfram Sang diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c index 498a462..049331c 100644 --- a/drivers/i2c/busses/i2c-omap.c +++ b/drivers/i2c/busses/i2c-omap.c @@ -176,6 +176,7 @@ enum { #define I2C_OMAP_ERRATA_I462 (1 << 1) struct omap_i2c_dev { + spinlock_t lock; /* IRQ synchronization */ struct device *dev; void __iomem *base; /* virtual */ int irq; @@ -854,9 +855,30 @@ static int omap_i2c_transmit_data(struct omap_i2c_dev *dev, u8 num_bytes, } static irqreturn_t -omap_i2c_isr(int this_irq, void *dev_id) +omap_i2c_isr(int irq, void *dev_id) { struct omap_i2c_dev *dev = dev_id; + irqreturn_t ret = IRQ_HANDLED; + u16 mask; + u16 stat; + + spin_lock(&dev->lock); + mask = omap_i2c_read_reg(dev, OMAP_I2C_IE_REG); + stat = omap_i2c_read_reg(dev, OMAP_I2C_STAT_REG); + + if (stat & mask) + ret = IRQ_WAKE_THREAD; + + spin_unlock(&dev->lock); + + return ret; +} + +static irqreturn_t +omap_i2c_isr_thread(int this_irq, void *dev_id) +{ + struct omap_i2c_dev *dev = dev_id; + unsigned long flags; u16 bits; u16 stat; int err = 0, count = 0; @@ -864,6 +886,7 @@ omap_i2c_isr(int this_irq, void *dev_id) if (pm_runtime_suspended(dev->dev)) return IRQ_NONE; + spin_lock_irqsave(&dev->lock, flags); do { bits = omap_i2c_read_reg(dev, OMAP_I2C_IE_REG); stat = omap_i2c_read_reg(dev, OMAP_I2C_STAT_REG); @@ -877,6 +900,7 @@ omap_i2c_isr(int this_irq, void *dev_id) if (!stat) { /* my work here is done */ + spin_unlock_irqrestore(&dev->lock, flags); return IRQ_HANDLED; } @@ -985,6 +1009,8 @@ omap_i2c_isr(int this_irq, void *dev_id) out: omap_i2c_complete_cmd(dev, err); + spin_unlock_irqrestore(&dev->lock, flags); + return IRQ_HANDLED; } @@ -1028,7 +1054,6 @@ omap_i2c_probe(struct platform_device *pdev) struct omap_i2c_bus_platform_data *pdata = pdev->dev.platform_data; struct device_node *node = pdev->dev.of_node; const struct of_device_id *match; - irq_handler_t isr; int irq; int r; @@ -1078,6 +1103,8 @@ omap_i2c_probe(struct platform_device *pdev) dev->dev = &pdev->dev; dev->irq = irq; + spin_lock_init(&dev->lock); + platform_set_drvdata(pdev, dev); init_completion(&dev->cmd_complete); @@ -1130,10 +1157,14 @@ omap_i2c_probe(struct platform_device *pdev) /* reset ASAP, clearing any IRQs */ omap_i2c_init(dev); - isr = (dev->rev < OMAP_I2C_OMAP1_REV_2) ? omap_i2c_omap1_isr : - omap_i2c_isr; - r = devm_request_irq(&pdev->dev, dev->irq, isr, IRQF_NO_SUSPEND, - pdev->name, dev); + if (dev->rev < OMAP_I2C_OMAP1_REV_2) + r = devm_request_irq(&pdev->dev, dev->irq, omap_i2c_omap1_isr, + IRQF_NO_SUSPEND, pdev->name, dev); + else + r = devm_request_threaded_irq(&pdev->dev, dev->irq, + omap_i2c_isr, omap_i2c_isr_thread, + IRQF_NO_SUSPEND | IRQF_ONESHOT, + pdev->name, dev); if (r) { dev_err(dev->dev, "failure requesting irq %i\n", dev->irq); -- cgit v0.10.2 From e3a36b207f76364c281aeecaf14c1b22a7247278 Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Wed, 12 Sep 2012 16:28:14 +0530 Subject: i2c: omap: remove unnecessary pm_runtime_suspended check before starting any messages we call pm_runtime_get_sync() which will make sure that by the time we program a transfer and our IRQ handler gets called, we're not suspended anymore. Signed-off-by: Felipe Balbi Signed-off-by: Shubhrajyoti D Signed-off-by: Wolfram Sang diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c index 049331c..6d38a57 100644 --- a/drivers/i2c/busses/i2c-omap.c +++ b/drivers/i2c/busses/i2c-omap.c @@ -883,9 +883,6 @@ omap_i2c_isr_thread(int this_irq, void *dev_id) u16 stat; int err = 0, count = 0; - if (pm_runtime_suspended(dev->dev)) - return IRQ_NONE; - spin_lock_irqsave(&dev->lock, flags); do { bits = omap_i2c_read_reg(dev, OMAP_I2C_IE_REG); -- cgit v0.10.2 From 6d8451d55a2a9467bc9647aafe8b6faee0251687 Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Wed, 12 Sep 2012 16:28:15 +0530 Subject: i2c: omap: switch over to autosuspend API this helps us reduce unnecessary pm transitions in case we have another i2c message starting soon. Signed-off-by: Felipe Balbi Signed-off-by: Shubhrajyoti D Signed-off-by: Wolfram Sang diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c index 6d38a57..122f517 100644 --- a/drivers/i2c/busses/i2c-omap.c +++ b/drivers/i2c/busses/i2c-omap.c @@ -55,6 +55,9 @@ /* timeout waiting for the controller to respond */ #define OMAP_I2C_TIMEOUT (msecs_to_jiffies(1000)) +/* timeout for pm runtime autosuspend */ +#define OMAP_I2C_PM_TIMEOUT 1000 /* ms */ + /* For OMAP3 I2C_IV has changed to I2C_WE (wakeup enable) */ enum { OMAP_I2C_REV_REG = 0, @@ -645,7 +648,8 @@ omap_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num) omap_i2c_wait_for_bb(dev); out: - pm_runtime_put(dev->dev); + pm_runtime_mark_last_busy(dev->dev); + pm_runtime_put_autosuspend(dev->dev); return r; } @@ -1113,6 +1117,9 @@ omap_i2c_probe(struct platform_device *pdev) dev->regs = (u8 *)reg_map_ip_v1; pm_runtime_enable(dev->dev); + pm_runtime_set_autosuspend_delay(dev->dev, OMAP_I2C_PM_TIMEOUT); + pm_runtime_use_autosuspend(dev->dev); + r = pm_runtime_get_sync(dev->dev); if (IS_ERR_VALUE(r)) goto err_free_mem; @@ -1190,7 +1197,8 @@ omap_i2c_probe(struct platform_device *pdev) of_i2c_register_devices(adap); - pm_runtime_put(dev->dev); + pm_runtime_mark_last_busy(dev->dev); + pm_runtime_put_autosuspend(dev->dev); return 0; -- cgit v0.10.2 From 0bdfe0cb803dce699ff337c35d8e97ac355fa417 Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Wed, 12 Sep 2012 16:28:16 +0530 Subject: i2c: omap: sanitize exit path move the goto out label one line down, so that it can be used when stat is read as zero. All other exits, can be done with a break statement. While at that, also break out as soon as we complete draining IRQ, since at that time we know we transferred everything there was to be transferred. Signed-off-by: Felipe Balbi Signed-off-by: Shubhrajyoti D Signed-off-by: Wolfram Sang diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c index 122f517..b149e32 100644 --- a/drivers/i2c/busses/i2c-omap.c +++ b/drivers/i2c/busses/i2c-omap.c @@ -901,27 +901,26 @@ omap_i2c_isr_thread(int this_irq, void *dev_id) if (!stat) { /* my work here is done */ - spin_unlock_irqrestore(&dev->lock, flags); - return IRQ_HANDLED; + goto out; } dev_dbg(dev->dev, "IRQ (ISR = 0x%04x)\n", stat); if (count++ == 100) { dev_warn(dev->dev, "Too much work in one IRQ\n"); - goto out; + break; } if (stat & OMAP_I2C_STAT_NACK) { err |= OMAP_I2C_STAT_NACK; omap_i2c_ack_stat(dev, OMAP_I2C_STAT_NACK); - goto out; + break; } if (stat & OMAP_I2C_STAT_AL) { dev_err(dev->dev, "Arbitration lost\n"); err |= OMAP_I2C_STAT_AL; omap_i2c_ack_stat(dev, OMAP_I2C_STAT_AL); - goto out; + break; } /* @@ -934,7 +933,7 @@ omap_i2c_isr_thread(int this_irq, void *dev_id) OMAP_I2C_STAT_XRDY | OMAP_I2C_STAT_XDR | OMAP_I2C_STAT_ARDY)); - goto out; + break; } if (stat & OMAP_I2C_STAT_RDR) { @@ -949,7 +948,7 @@ omap_i2c_isr_thread(int this_irq, void *dev_id) i2c_omap_errata_i207(dev, stat); omap_i2c_ack_stat(dev, OMAP_I2C_STAT_RDR); - continue; + break; } if (stat & OMAP_I2C_STAT_RRDY) { @@ -972,10 +971,10 @@ omap_i2c_isr_thread(int this_irq, void *dev_id) ret = omap_i2c_transmit_data(dev, num_bytes, true); if (ret < 0) - goto out; + break; omap_i2c_ack_stat(dev, OMAP_I2C_STAT_XDR); - continue; + break; } if (stat & OMAP_I2C_STAT_XRDY) { @@ -987,7 +986,7 @@ omap_i2c_isr_thread(int this_irq, void *dev_id) ret = omap_i2c_transmit_data(dev, num_bytes, false); if (ret < 0) - goto out; + break; omap_i2c_ack_stat(dev, OMAP_I2C_STAT_XRDY); continue; @@ -997,19 +996,20 @@ omap_i2c_isr_thread(int this_irq, void *dev_id) dev_err(dev->dev, "Receive overrun\n"); err |= OMAP_I2C_STAT_ROVR; omap_i2c_ack_stat(dev, OMAP_I2C_STAT_ROVR); - goto out; + break; } if (stat & OMAP_I2C_STAT_XUDF) { dev_err(dev->dev, "Transmit underflow\n"); err |= OMAP_I2C_STAT_XUDF; omap_i2c_ack_stat(dev, OMAP_I2C_STAT_XUDF); - goto out; + break; } } while (stat); -out: omap_i2c_complete_cmd(dev, err); + +out: spin_unlock_irqrestore(&dev->lock, flags); return IRQ_HANDLED; -- cgit v0.10.2 From c5d3cd6dc2dc106ca9fcc8cb6587754ee6cfc86e Mon Sep 17 00:00:00 2001 From: Florian Vaussard Date: Fri, 31 Aug 2012 13:02:55 +0200 Subject: omap-i2c: fix incorrect log message when using a device tree When booting using a device tree, the adapter number is dynamically assigned after the log message is sent. This patch modifies the log message to get a correct adapter id. Signed-off-by: Florian Vaussard Tested-by: Benoit Cousson Acked-by: Shubhrajyoti D Signed-off-by: Wolfram Sang diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c index b149e32..c78431a 100644 --- a/drivers/i2c/busses/i2c-omap.c +++ b/drivers/i2c/busses/i2c-omap.c @@ -1175,9 +1175,6 @@ omap_i2c_probe(struct platform_device *pdev) goto err_unuse_clocks; } - dev_info(dev->dev, "bus %d rev%d.%d.%d at %d kHz\n", pdev->id, - dev->dtrev, dev->rev >> 4, dev->rev & 0xf, dev->speed); - adap = &dev->adapter; i2c_set_adapdata(adap, dev); adap->owner = THIS_MODULE; @@ -1195,6 +1192,9 @@ omap_i2c_probe(struct platform_device *pdev) goto err_unuse_clocks; } + dev_info(dev->dev, "bus %d rev%d.%d.%d at %d kHz\n", adap->nr, + dev->dtrev, dev->rev >> 4, dev->rev & 0xf, dev->speed); + of_i2c_register_devices(adap); pm_runtime_mark_last_busy(dev->dev); -- cgit v0.10.2 From 2bdbfa9c4a14f0015d1e189b17175a989d7c2a40 Mon Sep 17 00:00:00 2001 From: Murali Karicheri Date: Thu, 30 Aug 2012 18:10:36 +0000 Subject: i2c: davinci: preparation for switch to common clock framework As a first step towards migrating davinci platforms to use common clock framework, replace all instances of clk_enable() with clk_prepare_enable() and clk_disable() with clk_disable_unprepare(). Until the platform is switched to use the CONFIG_HAVE_CLK_PREPARE Kconfig variable, this just adds a might_sleep() call and would work without any issues. This will make it easy later to switch to common clk based implementation of clk driver from DaVinci specific driver. Signed-off-by: Murali Karicheri Signed-off-by: Wolfram Sang diff --git a/drivers/i2c/busses/i2c-davinci.c b/drivers/i2c/busses/i2c-davinci.c index b6185dc..85ce548 100644 --- a/drivers/i2c/busses/i2c-davinci.c +++ b/drivers/i2c/busses/i2c-davinci.c @@ -704,7 +704,7 @@ static int davinci_i2c_probe(struct platform_device *pdev) r = -ENODEV; goto err_free_mem; } - clk_enable(dev->clk); + clk_prepare_enable(dev->clk); dev->base = ioremap(mem->start, resource_size(mem)); if (!dev->base) { @@ -751,7 +751,7 @@ err_free_irq: err_unuse_clocks: iounmap(dev->base); err_mem_ioremap: - clk_disable(dev->clk); + clk_disable_unprepare(dev->clk); clk_put(dev->clk); dev->clk = NULL; err_free_mem: @@ -775,7 +775,7 @@ static int davinci_i2c_remove(struct platform_device *pdev) i2c_del_adapter(&dev->adapter); put_device(&pdev->dev); - clk_disable(dev->clk); + clk_disable_unprepare(dev->clk); clk_put(dev->clk); dev->clk = NULL; @@ -797,7 +797,7 @@ static int davinci_i2c_suspend(struct device *dev) /* put I2C into reset */ davinci_i2c_reset_ctrl(i2c_dev, 0); - clk_disable(i2c_dev->clk); + clk_disable_unprepare(i2c_dev->clk); return 0; } @@ -807,7 +807,7 @@ static int davinci_i2c_resume(struct device *dev) struct platform_device *pdev = to_platform_device(dev); struct davinci_i2c_dev *i2c_dev = platform_get_drvdata(pdev); - clk_enable(i2c_dev->clk); + clk_prepare_enable(i2c_dev->clk); /* take I2C out of reset */ davinci_i2c_reset_ctrl(i2c_dev, 1); -- cgit v0.10.2 From 0c25aefa35c2fb5592895615f77d9f6fa36a849d Mon Sep 17 00:00:00 2001 From: Joakim Tjernlund Date: Thu, 30 Aug 2012 12:40:04 +0200 Subject: i2c: mpc: Wait for STOP to hit the bus mpc_i2c_stop() only initiates STOP but does not wait for it to hit the I2C bus. This is a problem when using I2C devices which uses fairly long clock stretching just before STOP if you also have an i2c-mux which may switch to another bus before STOP has been processed. Signed-off-by: Joakim Tjernlund Signed-off-by: Wolfram Sang diff --git a/drivers/i2c/busses/i2c-mpc.c b/drivers/i2c/busses/i2c-mpc.c index b76731e..64b0b4d 100644 --- a/drivers/i2c/busses/i2c-mpc.c +++ b/drivers/i2c/busses/i2c-mpc.c @@ -576,7 +576,23 @@ static int mpc_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num) mpc_write(i2c, pmsg->addr, pmsg->buf, pmsg->len, i); } } - mpc_i2c_stop(i2c); + mpc_i2c_stop(i2c); /* Initiate STOP */ + orig_jiffies = jiffies; + /* Wait until STOP is seen, allow up to 1 s */ + while (readb(i2c->base + MPC_I2C_SR) & CSR_MBB) { + if (time_after(jiffies, orig_jiffies + HZ)) { + u8 status = readb(i2c->base + MPC_I2C_SR); + + dev_dbg(i2c->dev, "timeout\n"); + if ((status & (CSR_MCF | CSR_MBB | CSR_RXAK)) != 0) { + writeb(status & ~CSR_MAL, + i2c->base + MPC_I2C_SR); + mpc_i2c_fixup(i2c); + } + return -EIO; + } + cond_resched(); + } return (ret < 0) ? ret : num; } -- cgit v0.10.2 From a76e7c6821b5dddf69db9d76ec282819545f5b73 Mon Sep 17 00:00:00 2001 From: Thomas Kavanagh Date: Thu, 20 Sep 2012 20:20:46 -0700 Subject: i2c: algo: pca: Fix chip reset function for PCA9665 The parameter passed to pca9665_reset is adap->data (which is bus driver specific), not i2c_algp_pca_data *adap. pca9665_reset expects it to be i2c_algp_pca_data *adap. All other wrappers from the algo call back to the bus driver, which knows to handle its custom data. Only pca9665_reset resides inside the algorithm code and does not know how to handle a custom data structure. This can result in a kernel crash. Fix by re-factoring pca_reset() from a macro to a function handling chip specific code, and only call adap->reset_chip() if the chip is not PCA9665. Signed-off-by: Thomas Kavanagh Signed-off-by: Guenter Roeck Signed-off-by: Wolfram Sang diff --git a/drivers/i2c/algos/i2c-algo-pca.c b/drivers/i2c/algos/i2c-algo-pca.c index 73133b1..07ccbef 100644 --- a/drivers/i2c/algos/i2c-algo-pca.c +++ b/drivers/i2c/algos/i2c-algo-pca.c @@ -46,14 +46,19 @@ static int i2c_debug; #define pca_set_con(adap, val) pca_outw(adap, I2C_PCA_CON, val) #define pca_get_con(adap) pca_inw(adap, I2C_PCA_CON) #define pca_wait(adap) adap->wait_for_completion(adap->data) -#define pca_reset(adap) adap->reset_chip(adap->data) -static void pca9665_reset(void *pd) +static void pca_reset(struct i2c_algo_pca_data *adap) { - struct i2c_algo_pca_data *adap = pd; - pca_outw(adap, I2C_PCA_INDPTR, I2C_PCA_IPRESET); - pca_outw(adap, I2C_PCA_IND, 0xA5); - pca_outw(adap, I2C_PCA_IND, 0x5A); + if (adap->chip == I2C_PCA_CHIP_9665) { + /* Ignore the reset function from the module, + * we can use the parallel bus reset. + */ + pca_outw(adap, I2C_PCA_INDPTR, I2C_PCA_IPRESET); + pca_outw(adap, I2C_PCA_IND, 0xA5); + pca_outw(adap, I2C_PCA_IND, 0x5A); + } else { + adap->reset_chip(adap->data); + } } /* @@ -378,11 +383,12 @@ static unsigned int pca_probe_chip(struct i2c_adapter *adap) pca_outw(pca_data, I2C_PCA_INDPTR, I2C_PCA_IADR); if (pca_inw(pca_data, I2C_PCA_IND) == 0xAA) { printk(KERN_INFO "%s: PCA9665 detected.\n", adap->name); - return I2C_PCA_CHIP_9665; + pca_data->chip = I2C_PCA_CHIP_9665; } else { printk(KERN_INFO "%s: PCA9564 detected.\n", adap->name); - return I2C_PCA_CHIP_9564; + pca_data->chip = I2C_PCA_CHIP_9564; } + return pca_data->chip; } static int pca_init(struct i2c_adapter *adap) @@ -456,11 +462,6 @@ static int pca_init(struct i2c_adapter *adap) */ int raise_fall_time; - /* Ignore the reset function from the module, - * we can use the parallel bus reset - */ - pca_data->reset_chip = pca9665_reset; - if (pca_data->i2c_clock > 1265800) { printk(KERN_WARNING "%s: I2C clock speed too high." " Using 1265.8kHz.\n", adap->name); diff --git a/include/linux/i2c-algo-pca.h b/include/linux/i2c-algo-pca.h index 1364d62..a3c3ecd 100644 --- a/include/linux/i2c-algo-pca.h +++ b/include/linux/i2c-algo-pca.h @@ -62,6 +62,7 @@ struct i2c_algo_pca_data { * 330000, 288000, 217000, 146000, 88000, 59000, 44000, 36000 * For PCA9665, use the frequency you want here. */ unsigned int i2c_clock; + unsigned int chip; }; int i2c_pca_add_bus(struct i2c_adapter *); -- cgit v0.10.2 From 43fea5813c56e4327371fd3c2209791ef7822de2 Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Mon, 6 Aug 2012 11:09:57 +0100 Subject: i2c: nomadik: Add Device Tree support to the Nomadik I2C driver Here we apply the bindings required for successful Device Tree probing of the i2c-nomadik driver. Signed-off-by: Lee Jones Acked-by: Linus Walleij Signed-off-by: Wolfram Sang diff --git a/Documentation/devicetree/bindings/i2c/nomadik.txt b/Documentation/devicetree/bindings/i2c/nomadik.txt new file mode 100644 index 0000000..72065b0 --- /dev/null +++ b/Documentation/devicetree/bindings/i2c/nomadik.txt @@ -0,0 +1,23 @@ +I2C for Nomadik based systems + +Required (non-standard) properties: + - Nil + +Recommended (non-standard) properties: + - clock-frequency : Maximum bus clock frequency for the device + +Optional (non-standard) properties: + - Nil + +Example : + +i2c@80004000 { + compatible = "stericsson,db8500-i2c", "st,nomadik-i2c"; + reg = <0x80004000 0x1000>; + interrupts = <0 21 0x4>; + #address-cells = <1>; + #size-cells = <0>; + v-i2c-supply = <&db8500_vape_reg>; + + clock-frequency = <400000>; +}; diff --git a/drivers/i2c/busses/i2c-nomadik.c b/drivers/i2c/busses/i2c-nomadik.c index 1b898b6..698d7ac 100644 --- a/drivers/i2c/busses/i2c-nomadik.c +++ b/drivers/i2c/busses/i2c-nomadik.c @@ -24,6 +24,8 @@ #include #include #include +#include +#include #define DRIVER_NAME "nmk-i2c" @@ -913,18 +915,42 @@ static struct nmk_i2c_controller u8500_i2c = { .sm = I2C_FREQ_MODE_FAST, }; +static void nmk_i2c_of_probe(struct device_node *np, + struct nmk_i2c_controller *pdata) +{ + of_property_read_u32(np, "clock-frequency", &pdata->clk_freq); + + /* This driver only supports 'standard' and 'fast' modes of operation. */ + if (pdata->clk_freq <= 100000) + pdata->sm = I2C_FREQ_MODE_STANDARD; + else + pdata->sm = I2C_FREQ_MODE_FAST; +} + static atomic_t adapter_id = ATOMIC_INIT(0); static int nmk_i2c_probe(struct amba_device *adev, const struct amba_id *id) { int ret = 0; struct nmk_i2c_controller *pdata = adev->dev.platform_data; + struct device_node *np = adev->dev.of_node; struct nmk_i2c_dev *dev; struct i2c_adapter *adap; - if (!pdata) - /* No i2c configuration found, using the default. */ - pdata = &u8500_i2c; + if (!pdata) { + if (np) { + pdata = devm_kzalloc(&adev->dev, sizeof(*pdata), GFP_KERNEL); + if (!pdata) { + ret = -ENOMEM; + goto err_no_mem; + } + /* Provide the default configuration as a base. */ + memcpy(pdata, &u8500_i2c, sizeof(struct nmk_i2c_controller)); + nmk_i2c_of_probe(np, pdata); + } else + /* No i2c configuration found, using the default. */ + pdata = &u8500_i2c; + } dev = kzalloc(sizeof(struct nmk_i2c_dev), GFP_KERNEL); if (!dev) { @@ -960,6 +986,7 @@ static int nmk_i2c_probe(struct amba_device *adev, const struct amba_id *id) } adap = &dev->adap; + adap->dev.of_node = np; adap->dev.parent = &adev->dev; adap->owner = THIS_MODULE; adap->class = I2C_CLASS_HWMON | I2C_CLASS_SPD; @@ -989,6 +1016,8 @@ static int nmk_i2c_probe(struct amba_device *adev, const struct amba_id *id) goto err_add_adap; } + of_i2c_register_devices(adap); + pm_runtime_put(&adev->dev); return 0; diff --git a/include/linux/platform_data/i2c-nomadik.h b/include/linux/platform_data/i2c-nomadik.h index c2303c3..3a8be9c 100644 --- a/include/linux/platform_data/i2c-nomadik.h +++ b/include/linux/platform_data/i2c-nomadik.h @@ -28,7 +28,7 @@ enum i2c_freq_mode { * @sm: speed mode */ struct nmk_i2c_controller { - unsigned long clk_freq; + u32 clk_freq; unsigned short slsu; unsigned char tft; unsigned char rft; -- cgit v0.10.2 From 3db11feffc1ad2ab9dea27789e6b5b3032827adc Mon Sep 17 00:00:00 2001 From: Jean Pihet Date: Thu, 20 Sep 2012 18:08:03 +0200 Subject: ARM: OMAP: convert I2C driver to PM QoS for MPU latency constraints Convert the driver from the outdated omap_pm_set_max_mpu_wakeup_lat API to the new PM QoS API. Since the constraint is on the MPU subsystem, use the PM_QOS_CPU_DMA_LATENCY class of PM QoS. The resulting MPU constraints are used by cpuidle to decide the next power state of the MPU subsystem. The I2C device latency timing is derived from the FIFO size and the clock speed and so is applicable to all OMAP SoCs. Signed-off-by: Jean Pihet Acked-by: Shubhrajyoti D Acked-by: Tony Lindgren Acked-by: Kevin Hilman Signed-off-by: Wolfram Sang diff --git a/arch/arm/plat-omap/i2c.c b/arch/arm/plat-omap/i2c.c index db071bc..dba8338 100644 --- a/arch/arm/plat-omap/i2c.c +++ b/arch/arm/plat-omap/i2c.c @@ -26,7 +26,6 @@ #include #include #include -#include #include #include #include @@ -34,7 +33,6 @@ #include #include #include -#include #include #define OMAP_I2C_SIZE 0x3f @@ -129,16 +127,6 @@ static inline int omap1_i2c_add_bus(int bus_id) #ifdef CONFIG_ARCH_OMAP2PLUS -/* - * XXX This function is a temporary compatibility wrapper - only - * needed until the I2C driver can be converted to call - * omap_pm_set_max_dev_wakeup_lat() and handle a return code. - */ -static void omap_pm_set_max_mpu_wakeup_lat_compat(struct device *dev, long t) -{ - omap_pm_set_max_mpu_wakeup_lat(dev, t); -} - static inline int omap2_i2c_add_bus(int bus_id) { int l; @@ -170,15 +158,6 @@ static inline int omap2_i2c_add_bus(int bus_id) dev_attr = (struct omap_i2c_dev_attr *)oh->dev_attr; pdata->flags = dev_attr->flags; - /* - * When waiting for completion of a i2c transfer, we need to - * set a wake up latency constraint for the MPU. This is to - * ensure quick enough wakeup from idle, when transfer - * completes. - * Only omap3 has support for constraints - */ - if (cpu_is_omap34xx()) - pdata->set_mpu_wkup_lat = omap_pm_set_max_mpu_wakeup_lat_compat; pdev = omap_device_build(name, bus_id, oh, pdata, sizeof(struct omap_i2c_bus_platform_data), NULL, 0, 0); diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c index c78431a..b6c6b95 100644 --- a/drivers/i2c/busses/i2c-omap.c +++ b/drivers/i2c/busses/i2c-omap.c @@ -43,6 +43,7 @@ #include #include #include +#include /* I2C controller revisions */ #define OMAP_I2C_OMAP1_REV_2 0x20 @@ -186,9 +187,8 @@ struct omap_i2c_dev { int reg_shift; /* bit shift for I2C register addresses */ struct completion cmd_complete; struct resource *ioarea; - u32 latency; /* maximum mpu wkup latency */ - void (*set_mpu_wkup_lat)(struct device *dev, - long latency); + u32 latency; /* maximum MPU wkup latency */ + struct pm_qos_request pm_qos_request; u32 speed; /* Speed of bus in kHz */ u32 dtrev; /* extra revision from DT */ u32 flags; @@ -494,9 +494,7 @@ static void omap_i2c_resize_fifo(struct omap_i2c_dev *dev, u8 size, bool is_rx) dev->b_hw = 1; /* Enable hardware fixes */ /* calculate wakeup latency constraint for MPU */ - if (dev->set_mpu_wkup_lat != NULL) - dev->latency = (1000000 * dev->threshold) / - (1000 * dev->speed / 8); + dev->latency = (1000000 * dev->threshold) / (1000 * dev->speed / 8); } /* @@ -631,8 +629,16 @@ omap_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num) if (r < 0) goto out; - if (dev->set_mpu_wkup_lat != NULL) - dev->set_mpu_wkup_lat(dev->dev, dev->latency); + /* + * When waiting for completion of a i2c transfer, we need to + * set a wake up latency constraint for the MPU. This is to + * ensure quick enough wakeup from idle, when transfer + * completes. + */ + if (dev->latency) + pm_qos_add_request(&dev->pm_qos_request, + PM_QOS_CPU_DMA_LATENCY, + dev->latency); for (i = 0; i < num; i++) { r = omap_i2c_xfer_msg(adap, &msgs[i], (i == (num - 1))); @@ -640,8 +646,8 @@ omap_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num) break; } - if (dev->set_mpu_wkup_lat != NULL) - dev->set_mpu_wkup_lat(dev->dev, -1); + if (dev->latency) + pm_qos_remove_request(&dev->pm_qos_request); if (r == 0) r = num; @@ -1097,7 +1103,6 @@ omap_i2c_probe(struct platform_device *pdev) } else if (pdata != NULL) { dev->speed = pdata->clkrate; dev->flags = pdata->flags; - dev->set_mpu_wkup_lat = pdata->set_mpu_wkup_lat; dev->dtrev = pdata->rev; } @@ -1153,9 +1158,8 @@ omap_i2c_probe(struct platform_device *pdev) dev->b_hw = 1; /* Enable hardware fixes */ /* calculate wakeup latency constraint for MPU */ - if (dev->set_mpu_wkup_lat != NULL) - dev->latency = (1000000 * dev->fifo_size) / - (1000 * dev->speed / 8); + dev->latency = (1000000 * dev->fifo_size) / + (1000 * dev->speed / 8); } /* reset ASAP, clearing any IRQs */ diff --git a/include/linux/i2c-omap.h b/include/linux/i2c-omap.h index 92a0dc7..df804ba 100644 --- a/include/linux/i2c-omap.h +++ b/include/linux/i2c-omap.h @@ -34,7 +34,6 @@ struct omap_i2c_bus_platform_data { u32 clkrate; u32 rev; u32 flags; - void (*set_mpu_wkup_lat)(struct device *dev, long set); }; #endif -- cgit v0.10.2 From d3b64c59341ac88b37a4474f8dee86b0d37accca Mon Sep 17 00:00:00 2001 From: Thomas Abraham Date: Wed, 3 Oct 2012 08:26:39 +0900 Subject: i2c: s3c2410: use clk_prepare_enable and clk_disable_unprepare Convert clk_enable/clk_disable to clk_prepare_enable/clk_disable_unprepare calls as required by common clock framework. Signed-off-by: Thomas Abraham Signed-off-by: Wolfram Sang diff --git a/drivers/i2c/busses/i2c-s3c2410.c b/drivers/i2c/busses/i2c-s3c2410.c index 5ae3b02..59cfcb4 100644 --- a/drivers/i2c/busses/i2c-s3c2410.c +++ b/drivers/i2c/busses/i2c-s3c2410.c @@ -601,14 +601,14 @@ static int s3c24xx_i2c_xfer(struct i2c_adapter *adap, int ret; pm_runtime_get_sync(&adap->dev); - clk_enable(i2c->clk); + clk_prepare_enable(i2c->clk); for (retry = 0; retry < adap->retries; retry++) { ret = s3c24xx_i2c_doxfer(i2c, msgs, num); if (ret != -EAGAIN) { - clk_disable(i2c->clk); + clk_disable_unprepare(i2c->clk); pm_runtime_put(&adap->dev); return ret; } @@ -618,7 +618,7 @@ static int s3c24xx_i2c_xfer(struct i2c_adapter *adap, udelay(100); } - clk_disable(i2c->clk); + clk_disable_unprepare(i2c->clk); pm_runtime_put(&adap->dev); return -EREMOTEIO; } @@ -977,7 +977,7 @@ static int s3c24xx_i2c_probe(struct platform_device *pdev) dev_dbg(&pdev->dev, "clock source %p\n", i2c->clk); - clk_enable(i2c->clk); + clk_prepare_enable(i2c->clk); /* map the registers */ @@ -1065,7 +1065,7 @@ static int s3c24xx_i2c_probe(struct platform_device *pdev) pm_runtime_enable(&i2c->adap.dev); dev_info(&pdev->dev, "%s: S3C I2C adapter\n", dev_name(&i2c->adap.dev)); - clk_disable(i2c->clk); + clk_disable_unprepare(i2c->clk); return 0; err_cpufreq: @@ -1082,7 +1082,7 @@ static int s3c24xx_i2c_probe(struct platform_device *pdev) kfree(i2c->ioarea); err_clk: - clk_disable(i2c->clk); + clk_disable_unprepare(i2c->clk); clk_put(i2c->clk); err_noclk: @@ -1106,7 +1106,7 @@ static int s3c24xx_i2c_remove(struct platform_device *pdev) i2c_del_adapter(&i2c->adap); free_irq(i2c->irq, i2c); - clk_disable(i2c->clk); + clk_disable_unprepare(i2c->clk); clk_put(i2c->clk); iounmap(i2c->regs); @@ -1135,9 +1135,9 @@ static int s3c24xx_i2c_resume(struct device *dev) struct s3c24xx_i2c *i2c = platform_get_drvdata(pdev); i2c->suspended = 0; - clk_enable(i2c->clk); + clk_prepare_enable(i2c->clk); s3c24xx_i2c_init(i2c); - clk_disable(i2c->clk); + clk_disable_unprepare(i2c->clk); return 0; } -- cgit v0.10.2 From 6ccbe607132bd823abbad8d32b13af89161707da Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Thu, 27 Sep 2012 23:44:25 -0700 Subject: i2c: add Renesas R-Car I2C driver R-Car I2C is similar with SH7760 I2C. But the SH7760 I2C driver had many workaround operations, since H/W had bugs. Thus, it was pointless to keep compatible between SH7760 and R-Car I2C drivers. This patch creates new Renesas R-Car I2C driver. Signed-off-by: Kuninori Morimoto Signed-off-by: Wolfram Sang diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig index da77c37..c8c11b2 100644 --- a/drivers/i2c/busses/Kconfig +++ b/drivers/i2c/busses/Kconfig @@ -712,6 +712,16 @@ config I2C_XLR This driver can also be built as a module. If so, the module will be called i2c-xlr. +config I2C_RCAR + tristate "Renesas R-Car I2C Controller" + depends on ARCH_SHMOBILE && I2C + help + If you say yes to this option, support will be included for the + R-Car I2C controller. + + This driver can also be built as a module. If so, the module + will be called i2c-rcar. + comment "External I2C/SMBus adapter drivers" config I2C_DIOLAN_U2C diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile index ce3c2be..e98ff51 100644 --- a/drivers/i2c/busses/Makefile +++ b/drivers/i2c/busses/Makefile @@ -70,6 +70,7 @@ obj-$(CONFIG_I2C_VERSATILE) += i2c-versatile.o obj-$(CONFIG_I2C_OCTEON) += i2c-octeon.o obj-$(CONFIG_I2C_XILINX) += i2c-xiic.o obj-$(CONFIG_I2C_XLR) += i2c-xlr.o +obj-$(CONFIG_I2C_RCAR) += i2c-rcar.o # External I2C/SMBus adapter drivers obj-$(CONFIG_I2C_DIOLAN_U2C) += i2c-diolan-u2c.o diff --git a/drivers/i2c/busses/i2c-rcar.c b/drivers/i2c/busses/i2c-rcar.c new file mode 100644 index 0000000..f9399d1 --- /dev/null +++ b/drivers/i2c/busses/i2c-rcar.c @@ -0,0 +1,709 @@ +/* + * drivers/i2c/busses/i2c-rcar.c + * + * Copyright (C) 2012 Renesas Solutions Corp. + * Kuninori Morimoto + * + * This file is based on the drivers/i2c/busses/i2c-sh7760.c + * (c) 2005-2008 MSC Vertriebsges.m.b.H, Manuel Lauss + * + * This file used out-of-tree driver i2c-rcar.c + * Copyright (C) 2011-2012 Renesas Electronics Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* register offsets */ +#define ICSCR 0x00 /* slave ctrl */ +#define ICMCR 0x04 /* master ctrl */ +#define ICSSR 0x08 /* slave status */ +#define ICMSR 0x0C /* master status */ +#define ICSIER 0x10 /* slave irq enable */ +#define ICMIER 0x14 /* master irq enable */ +#define ICCCR 0x18 /* clock dividers */ +#define ICSAR 0x1C /* slave address */ +#define ICMAR 0x20 /* master address */ +#define ICRXTX 0x24 /* data port */ + +/* ICMCR */ +#define MDBS (1 << 7) /* non-fifo mode switch */ +#define FSCL (1 << 6) /* override SCL pin */ +#define FSDA (1 << 5) /* override SDA pin */ +#define OBPC (1 << 4) /* override pins */ +#define MIE (1 << 3) /* master if enable */ +#define TSBE (1 << 2) +#define FSB (1 << 1) /* force stop bit */ +#define ESG (1 << 0) /* en startbit gen */ + +/* ICMSR */ +#define MNR (1 << 6) /* nack received */ +#define MAL (1 << 5) /* arbitration lost */ +#define MST (1 << 4) /* sent a stop */ +#define MDE (1 << 3) +#define MDT (1 << 2) +#define MDR (1 << 1) +#define MAT (1 << 0) /* slave addr xfer done */ + +/* ICMIE */ +#define MNRE (1 << 6) /* nack irq en */ +#define MALE (1 << 5) /* arblos irq en */ +#define MSTE (1 << 4) /* stop irq en */ +#define MDEE (1 << 3) +#define MDTE (1 << 2) +#define MDRE (1 << 1) +#define MATE (1 << 0) /* address sent irq en */ + + +enum { + RCAR_BUS_PHASE_ADDR, + RCAR_BUS_PHASE_DATA, + RCAR_BUS_PHASE_STOP, +}; + +enum { + RCAR_IRQ_CLOSE, + RCAR_IRQ_OPEN_FOR_SEND, + RCAR_IRQ_OPEN_FOR_RECV, + RCAR_IRQ_OPEN_FOR_STOP, +}; + +/* + * flags + */ +#define ID_LAST_MSG (1 << 0) +#define ID_IOERROR (1 << 1) +#define ID_DONE (1 << 2) +#define ID_ARBLOST (1 << 3) +#define ID_NACK (1 << 4) + +struct rcar_i2c_priv { + void __iomem *io; + struct i2c_adapter adap; + struct i2c_msg *msg; + + spinlock_t lock; + wait_queue_head_t wait; + + int pos; + int irq; + u32 icccr; + u32 flags; +}; + +#define rcar_i2c_priv_to_dev(p) ((p)->adap.dev.parent) +#define rcar_i2c_is_recv(p) ((p)->msg->flags & I2C_M_RD) + +#define rcar_i2c_flags_set(p, f) ((p)->flags |= (f)) +#define rcar_i2c_flags_has(p, f) ((p)->flags & (f)) + +#define LOOP_TIMEOUT 1024 + +/* + * basic functions + */ +static void rcar_i2c_write(struct rcar_i2c_priv *priv, int reg, u32 val) +{ + writel(val, priv->io + reg); +} + +static u32 rcar_i2c_read(struct rcar_i2c_priv *priv, int reg) +{ + return readl(priv->io + reg); +} + +static void rcar_i2c_init(struct rcar_i2c_priv *priv) +{ + /* + * reset slave mode. + * slave mode is not used on this driver + */ + rcar_i2c_write(priv, ICSIER, 0); + rcar_i2c_write(priv, ICSAR, 0); + rcar_i2c_write(priv, ICSCR, 0); + rcar_i2c_write(priv, ICSSR, 0); + + /* reset master mode */ + rcar_i2c_write(priv, ICMIER, 0); + rcar_i2c_write(priv, ICMCR, 0); + rcar_i2c_write(priv, ICMSR, 0); + rcar_i2c_write(priv, ICMAR, 0); +} + +static void rcar_i2c_irq_mask(struct rcar_i2c_priv *priv, int open) +{ + u32 val = MNRE | MALE | MSTE | MATE; /* default */ + + switch (open) { + case RCAR_IRQ_OPEN_FOR_SEND: + val |= MDEE; /* default + send */ + break; + case RCAR_IRQ_OPEN_FOR_RECV: + val |= MDRE; /* default + read */ + break; + case RCAR_IRQ_OPEN_FOR_STOP: + val = MSTE; /* stop irq only */ + break; + case RCAR_IRQ_CLOSE: + default: + val = 0; /* all close */ + break; + } + rcar_i2c_write(priv, ICMIER, val); +} + +static void rcar_i2c_set_addr(struct rcar_i2c_priv *priv, u32 recv) +{ + rcar_i2c_write(priv, ICMAR, (priv->msg->addr << 1) | recv); +} + +/* + * bus control functions + */ +static int rcar_i2c_bus_barrier(struct rcar_i2c_priv *priv) +{ + int i; + + for (i = 0; i < LOOP_TIMEOUT; i++) { + /* make sure that bus is not busy */ + if (!(rcar_i2c_read(priv, ICMCR) & FSDA)) + return 0; + udelay(1); + } + + return -EBUSY; +} + +static void rcar_i2c_bus_phase(struct rcar_i2c_priv *priv, int phase) +{ + switch (phase) { + case RCAR_BUS_PHASE_ADDR: + rcar_i2c_write(priv, ICMCR, MDBS | MIE | ESG); + break; + case RCAR_BUS_PHASE_DATA: + rcar_i2c_write(priv, ICMCR, MDBS | MIE); + break; + case RCAR_BUS_PHASE_STOP: + rcar_i2c_write(priv, ICMCR, MDBS | MIE | FSB); + break; + } +} + +/* + * clock function + */ +static int rcar_i2c_clock_calculate(struct rcar_i2c_priv *priv, + u32 bus_speed, + struct device *dev) +{ + struct clk *clkp = clk_get(NULL, "peripheral_clk"); + u32 scgd, cdf; + u32 round, ick; + u32 scl; + + if (!clkp) { + dev_err(dev, "there is no peripheral_clk\n"); + return -EIO; + } + + /* + * calculate SCL clock + * see + * ICCCR + * + * ick = clkp / (1 + CDF) + * SCL = ick / (20 + SCGD * 8 + F[(ticf + tr + intd) * ick]) + * + * ick : I2C internal clock < 20 MHz + * ticf : I2C SCL falling time = 35 ns here + * tr : I2C SCL rising time = 200 ns here + * intd : LSI internal delay = 50 ns here + * clkp : peripheral_clk + * F[] : integer up-valuation + */ + for (cdf = 0; cdf < 4; cdf++) { + ick = clk_get_rate(clkp) / (1 + cdf); + if (ick < 20000000) + goto ick_find; + } + dev_err(dev, "there is no best CDF\n"); + return -EIO; + +ick_find: + /* + * it is impossible to calculate large scale + * number on u32. separate it + * + * F[(ticf + tr + intd) * ick] + * = F[(35 + 200 + 50)ns * ick] + * = F[285 * ick / 1000000000] + * = F[(ick / 1000000) * 285 / 1000] + */ + round = (ick + 500000) / 1000000 * 285; + round = (round + 500) / 1000; + + /* + * SCL = ick / (20 + SCGD * 8 + F[(ticf + tr + intd) * ick]) + * + * Calculation result (= SCL) should be less than + * bus_speed for hardware safety + */ + for (scgd = 0; scgd < 0x40; scgd++) { + scl = ick / (20 + (scgd * 8) + round); + if (scl <= bus_speed) + goto scgd_find; + } + dev_err(dev, "it is impossible to calculate best SCL\n"); + return -EIO; + +scgd_find: + dev_dbg(dev, "clk %d/%d(%lu), round %u, CDF:0x%x, SCGD: 0x%x\n", + scl, bus_speed, clk_get_rate(clkp), round, cdf, scgd); + + /* + * keep icccr value + */ + priv->icccr = (scgd << 2 | cdf); + + return 0; +} + +static void rcar_i2c_clock_start(struct rcar_i2c_priv *priv) +{ + rcar_i2c_write(priv, ICCCR, priv->icccr); +} + +/* + * status functions + */ +static u32 rcar_i2c_status_get(struct rcar_i2c_priv *priv) +{ + return rcar_i2c_read(priv, ICMSR); +} + +#define rcar_i2c_status_clear(priv) rcar_i2c_status_bit_clear(priv, 0xffffffff) +static void rcar_i2c_status_bit_clear(struct rcar_i2c_priv *priv, u32 bit) +{ + rcar_i2c_write(priv, ICMSR, ~bit); +} + +/* + * recv/send functions + */ +static int rcar_i2c_recv(struct rcar_i2c_priv *priv) +{ + rcar_i2c_set_addr(priv, 1); + rcar_i2c_status_clear(priv); + rcar_i2c_bus_phase(priv, RCAR_BUS_PHASE_ADDR); + rcar_i2c_irq_mask(priv, RCAR_IRQ_OPEN_FOR_RECV); + + return 0; +} + +static int rcar_i2c_send(struct rcar_i2c_priv *priv) +{ + int ret; + + /* + * It should check bus status when send case + */ + ret = rcar_i2c_bus_barrier(priv); + if (ret < 0) + return ret; + + rcar_i2c_set_addr(priv, 0); + rcar_i2c_status_clear(priv); + rcar_i2c_bus_phase(priv, RCAR_BUS_PHASE_ADDR); + rcar_i2c_irq_mask(priv, RCAR_IRQ_OPEN_FOR_SEND); + + return 0; +} + +#define rcar_i2c_send_restart(priv) rcar_i2c_status_bit_clear(priv, (MAT | MDE)) +#define rcar_i2c_recv_restart(priv) rcar_i2c_status_bit_clear(priv, (MAT | MDR)) + +/* + * interrupt functions + */ +static int rcar_i2c_irq_send(struct rcar_i2c_priv *priv, u32 msr) +{ + struct i2c_msg *msg = priv->msg; + + /* + * FIXME + * sometimes, unknown interrupt happened. + * Do nothing + */ + if (!(msr & MDE)) + return 0; + + /* + * If address transfer phase finished, + * goto data phase. + */ + if (msr & MAT) + rcar_i2c_bus_phase(priv, RCAR_BUS_PHASE_DATA); + + if (priv->pos < msg->len) { + /* + * Prepare next data to ICRXTX register. + * This data will go to _SHIFT_ register. + * + * * + * [ICRXTX] -> [SHIFT] -> [I2C bus] + */ + rcar_i2c_write(priv, ICRXTX, msg->buf[priv->pos]); + priv->pos++; + + } else { + /* + * The last data was pushed to ICRXTX on _PREV_ empty irq. + * It is on _SHIFT_ register, and will sent to I2C bus. + * + * * + * [ICRXTX] -> [SHIFT] -> [I2C bus] + */ + + if (priv->flags & ID_LAST_MSG) + /* + * If current msg is the _LAST_ msg, + * prepare stop condition here. + * ID_DONE will be set on STOP irq. + */ + rcar_i2c_bus_phase(priv, RCAR_BUS_PHASE_STOP); + else + /* + * If current msg is _NOT_ last msg, + * it doesn't call stop phase. + * thus, there is no STOP irq. + * return ID_DONE here. + */ + return ID_DONE; + } + + rcar_i2c_send_restart(priv); + + return 0; +} + +static int rcar_i2c_irq_recv(struct rcar_i2c_priv *priv, u32 msr) +{ + struct i2c_msg *msg = priv->msg; + + /* + * FIXME + * sometimes, unknown interrupt happened. + * Do nothing + */ + if (!(msr & MDR)) + return 0; + + if (msr & MAT) { + /* + * Address transfer phase finished, + * but, there is no data at this point. + * Do nothing. + */ + } else if (priv->pos < msg->len) { + /* + * get received data + */ + msg->buf[priv->pos] = rcar_i2c_read(priv, ICRXTX); + priv->pos++; + } + + /* + * If next received data is the _LAST_, + * go to STOP phase, + * otherwise, go to DATA phase. + */ + if (priv->pos + 1 >= msg->len) + rcar_i2c_bus_phase(priv, RCAR_BUS_PHASE_STOP); + else + rcar_i2c_bus_phase(priv, RCAR_BUS_PHASE_DATA); + + rcar_i2c_recv_restart(priv); + + return 0; +} + +static irqreturn_t rcar_i2c_irq(int irq, void *ptr) +{ + struct rcar_i2c_priv *priv = ptr; + struct device *dev = rcar_i2c_priv_to_dev(priv); + u32 msr; + + /*-------------- spin lock -----------------*/ + spin_lock(&priv->lock); + + msr = rcar_i2c_status_get(priv); + + /* + * Arbitration lost + */ + if (msr & MAL) { + /* + * CAUTION + * + * When arbitration lost, device become _slave_ mode. + */ + dev_dbg(dev, "Arbitration Lost\n"); + rcar_i2c_flags_set(priv, (ID_DONE | ID_ARBLOST)); + goto out; + } + + /* + * Stop + */ + if (msr & MST) { + dev_dbg(dev, "Stop\n"); + rcar_i2c_flags_set(priv, ID_DONE); + goto out; + } + + /* + * Nack + */ + if (msr & MNR) { + dev_dbg(dev, "Nack\n"); + + /* go to stop phase */ + rcar_i2c_bus_phase(priv, RCAR_BUS_PHASE_STOP); + rcar_i2c_irq_mask(priv, RCAR_IRQ_OPEN_FOR_STOP); + rcar_i2c_flags_set(priv, ID_NACK); + goto out; + } + + /* + * recv/send + */ + if (rcar_i2c_is_recv(priv)) + rcar_i2c_flags_set(priv, rcar_i2c_irq_recv(priv, msr)); + else + rcar_i2c_flags_set(priv, rcar_i2c_irq_send(priv, msr)); + +out: + if (rcar_i2c_flags_has(priv, ID_DONE)) { + rcar_i2c_irq_mask(priv, RCAR_IRQ_CLOSE); + rcar_i2c_status_clear(priv); + wake_up(&priv->wait); + } + + spin_unlock(&priv->lock); + /*-------------- spin unlock -----------------*/ + + return IRQ_HANDLED; +} + +static int rcar_i2c_master_xfer(struct i2c_adapter *adap, + struct i2c_msg *msgs, + int num) +{ + struct rcar_i2c_priv *priv = i2c_get_adapdata(adap); + struct device *dev = rcar_i2c_priv_to_dev(priv); + unsigned long flags; + int i, ret, timeout; + + pm_runtime_get_sync(dev); + + /*-------------- spin lock -----------------*/ + spin_lock_irqsave(&priv->lock, flags); + + rcar_i2c_init(priv); + rcar_i2c_clock_start(priv); + + spin_unlock_irqrestore(&priv->lock, flags); + /*-------------- spin unlock -----------------*/ + + ret = -EINVAL; + for (i = 0; i < num; i++) { + /*-------------- spin lock -----------------*/ + spin_lock_irqsave(&priv->lock, flags); + + /* init each data */ + priv->msg = &msgs[i]; + priv->pos = 0; + priv->flags = 0; + if (priv->msg == &msgs[num - 1]) + rcar_i2c_flags_set(priv, ID_LAST_MSG); + + /* start send/recv */ + if (rcar_i2c_is_recv(priv)) + ret = rcar_i2c_recv(priv); + else + ret = rcar_i2c_send(priv); + + spin_unlock_irqrestore(&priv->lock, flags); + /*-------------- spin unlock -----------------*/ + + if (ret < 0) + break; + + /* + * wait result + */ + timeout = wait_event_timeout(priv->wait, + rcar_i2c_flags_has(priv, ID_DONE), + 5 * HZ); + if (!timeout) { + ret = -ETIMEDOUT; + break; + } + + /* + * error handling + */ + if (rcar_i2c_flags_has(priv, ID_NACK)) { + ret = -EREMOTEIO; + break; + } + + if (rcar_i2c_flags_has(priv, ID_ARBLOST)) { + ret = -EAGAIN; + break; + } + + if (rcar_i2c_flags_has(priv, ID_IOERROR)) { + ret = -EIO; + break; + } + + ret = i + 1; /* The number of transfer */ + } + + pm_runtime_put(dev); + + if (ret < 0) + dev_err(dev, "error %d : %x\n", ret, priv->flags); + + return ret; +} + +static u32 rcar_i2c_func(struct i2c_adapter *adap) +{ + return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL; +} + +static const struct i2c_algorithm rcar_i2c_algo = { + .master_xfer = rcar_i2c_master_xfer, + .functionality = rcar_i2c_func, +}; + +static int __devinit rcar_i2c_probe(struct platform_device *pdev) +{ + struct i2c_rcar_platform_data *pdata = pdev->dev.platform_data; + struct rcar_i2c_priv *priv; + struct i2c_adapter *adap; + struct resource *res; + struct device *dev = &pdev->dev; + u32 bus_speed; + int ret; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) { + dev_err(dev, "no mmio resources\n"); + return -ENODEV; + } + + priv = devm_kzalloc(dev, sizeof(struct rcar_i2c_priv), GFP_KERNEL); + if (!priv) { + dev_err(dev, "no mem for private data\n"); + return -ENOMEM; + } + + bus_speed = 100000; /* default 100 kHz */ + if (pdata && pdata->bus_speed) + bus_speed = pdata->bus_speed; + ret = rcar_i2c_clock_calculate(priv, bus_speed, dev); + if (ret < 0) + return ret; + + priv->io = devm_ioremap(dev, res->start, resource_size(res)); + if (!priv->io) { + dev_err(dev, "cannot ioremap\n"); + return -ENODEV; + } + + priv->irq = platform_get_irq(pdev, 0); + init_waitqueue_head(&priv->wait); + spin_lock_init(&priv->lock); + + adap = &priv->adap; + adap->nr = pdev->id; + adap->algo = &rcar_i2c_algo; + adap->class = I2C_CLASS_HWMON | I2C_CLASS_SPD; + adap->retries = 3; + adap->dev.parent = dev; + i2c_set_adapdata(adap, priv); + strlcpy(adap->name, pdev->name, sizeof(adap->name)); + + ret = devm_request_irq(dev, priv->irq, rcar_i2c_irq, 0, + dev_name(dev), priv); + if (ret < 0) { + dev_err(dev, "cannot get irq %d\n", priv->irq); + return ret; + } + + ret = i2c_add_numbered_adapter(adap); + if (ret < 0) { + dev_err(dev, "reg adap failed: %d\n", ret); + return ret; + } + + pm_runtime_enable(dev); + platform_set_drvdata(pdev, priv); + + dev_info(dev, "probed\n"); + + return 0; +} + +static int __devexit rcar_i2c_remove(struct platform_device *pdev) +{ + struct rcar_i2c_priv *priv = platform_get_drvdata(pdev); + struct device *dev = &pdev->dev; + + i2c_del_adapter(&priv->adap); + pm_runtime_disable(dev); + + return 0; +} + +static struct platform_driver rcar_i2c_drv = { + .driver = { + .name = "i2c-rcar", + .owner = THIS_MODULE, + }, + .probe = rcar_i2c_probe, + .remove = __devexit_p(rcar_i2c_remove), +}; + +module_platform_driver(rcar_i2c_drv); + +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("Renesas R-Car I2C bus driver"); +MODULE_AUTHOR("Kuninori Morimoto "); diff --git a/include/linux/i2c/i2c-rcar.h b/include/linux/i2c/i2c-rcar.h new file mode 100644 index 0000000..496f5c2 --- /dev/null +++ b/include/linux/i2c/i2c-rcar.h @@ -0,0 +1,10 @@ +#ifndef __I2C_R_CAR_H__ +#define __I2C_R_CAR_H__ + +#include + +struct i2c_rcar_platform_data { + u32 bus_speed; +}; + +#endif /* __I2C_R_CAR_H__ */ -- cgit v0.10.2 From 62885f59a26195d9f6a3f8c795225dfbab62a110 Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Fri, 24 Aug 2012 05:44:31 +0200 Subject: MXS: Implement DMA support into mxs-i2c This patch implements DMA support into mxs-i2c. DMA transfers are now enabled via DT. The DMA operation is enabled by default. Signed-off-by: Marek Vasut Tested-by: Fabio Estevam [wsa: rebased to 3.6-rc7] Signed-off-by: Wolfram Sang diff --git a/Documentation/devicetree/bindings/i2c/i2c-mxs.txt b/Documentation/devicetree/bindings/i2c/i2c-mxs.txt index 30ac3a0..7a3fe9e 100644 --- a/Documentation/devicetree/bindings/i2c/i2c-mxs.txt +++ b/Documentation/devicetree/bindings/i2c/i2c-mxs.txt @@ -6,6 +6,7 @@ Required properties: - interrupts: Should contain ERROR and DMA interrupts - clock-frequency: Desired I2C bus clock frequency in Hz. Only 100000Hz and 400000Hz modes are supported. +- fsl,i2c-dma-channel: APBX DMA channel for the I2C Examples: @@ -16,4 +17,5 @@ i2c0: i2c@80058000 { reg = <0x80058000 2000>; interrupts = <111 68>; clock-frequency = <100000>; + fsl,i2c-dma-channel = <6>; }; diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi index 3fa6d19..ba8227e 100644 --- a/arch/arm/boot/dts/imx28.dtsi +++ b/arch/arm/boot/dts/imx28.dtsi @@ -661,6 +661,7 @@ reg = <0x80058000 0x2000>; interrupts = <111 68>; clock-frequency = <100000>; + fsl,i2c-dma-channel = <6>; status = "disabled"; }; @@ -671,6 +672,7 @@ reg = <0x8005a000 0x2000>; interrupts = <110 69>; clock-frequency = <100000>; + fsl,i2c-dma-channel = <7>; status = "disabled"; }; diff --git a/drivers/i2c/busses/i2c-mxs.c b/drivers/i2c/busses/i2c-mxs.c index 51f05b8..1f58197 100644 --- a/drivers/i2c/busses/i2c-mxs.c +++ b/drivers/i2c/busses/i2c-mxs.c @@ -7,8 +7,6 @@ * * Copyright (C) 2009-2010 Freescale Semiconductor, Inc. All Rights Reserved. * - * TODO: add dma-support if platform-support for it is available - * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or @@ -31,9 +29,16 @@ #include #include #include +#include +#include +#include #define DRIVER_NAME "mxs-i2c" +static bool use_pioqueue; +module_param(use_pioqueue, bool, 0); +MODULE_PARM_DESC(use_pioqueue, "Use PIOQUEUE mode for transfer instead of DMA"); + #define MXS_I2C_CTRL0 (0x00) #define MXS_I2C_CTRL0_SET (0x04) @@ -146,6 +151,16 @@ struct mxs_i2c_dev { u32 cmd_err; struct i2c_adapter adapter; const struct mxs_i2c_speed_config *speed; + + /* DMA support components */ + bool dma_mode; + int dma_channel; + struct dma_chan *dmach; + struct mxs_dma_data dma_data; + uint32_t pio_data[2]; + uint32_t addr_data; + struct scatterlist sg_io[2]; + bool dma_read; }; static void mxs_i2c_reset(struct mxs_i2c_dev *i2c) @@ -157,7 +172,11 @@ static void mxs_i2c_reset(struct mxs_i2c_dev *i2c) writel(i2c->speed->timing2, i2c->regs + MXS_I2C_TIMING2); writel(MXS_I2C_IRQ_MASK << 8, i2c->regs + MXS_I2C_CTRL1_SET); - writel(MXS_I2C_QUEUECTRL_PIO_QUEUE_MODE, + if (i2c->dma_mode) + writel(MXS_I2C_QUEUECTRL_PIO_QUEUE_MODE, + i2c->regs + MXS_I2C_QUEUECTRL_CLR); + else + writel(MXS_I2C_QUEUECTRL_PIO_QUEUE_MODE, i2c->regs + MXS_I2C_QUEUECTRL_SET); } @@ -248,6 +267,150 @@ static int mxs_i2c_finish_read(struct mxs_i2c_dev *i2c, u8 *buf, int len) return 0; } +static void mxs_i2c_dma_finish(struct mxs_i2c_dev *i2c) +{ + if (i2c->dma_read) { + dma_unmap_sg(i2c->dev, &i2c->sg_io[0], 1, DMA_TO_DEVICE); + dma_unmap_sg(i2c->dev, &i2c->sg_io[1], 1, DMA_FROM_DEVICE); + } else { + dma_unmap_sg(i2c->dev, i2c->sg_io, 2, DMA_TO_DEVICE); + } +} + +static void mxs_i2c_dma_irq_callback(void *param) +{ + struct mxs_i2c_dev *i2c = param; + + complete(&i2c->cmd_complete); + mxs_i2c_dma_finish(i2c); +} + +static int mxs_i2c_dma_setup_xfer(struct i2c_adapter *adap, + struct i2c_msg *msg, uint32_t flags) +{ + struct dma_async_tx_descriptor *desc; + struct mxs_i2c_dev *i2c = i2c_get_adapdata(adap); + + if (msg->flags & I2C_M_RD) { + i2c->dma_read = 1; + i2c->addr_data = (msg->addr << 1) | I2C_SMBUS_READ; + + /* + * SELECT command. + */ + + /* Queue the PIO register write transfer. */ + i2c->pio_data[0] = MXS_CMD_I2C_SELECT; + desc = dmaengine_prep_slave_sg(i2c->dmach, + (struct scatterlist *)&i2c->pio_data[0], + 1, DMA_TRANS_NONE, 0); + if (!desc) { + dev_err(i2c->dev, + "Failed to get PIO reg. write descriptor.\n"); + goto select_init_pio_fail; + } + + /* Queue the DMA data transfer. */ + sg_init_one(&i2c->sg_io[0], &i2c->addr_data, 1); + dma_map_sg(i2c->dev, &i2c->sg_io[0], 1, DMA_TO_DEVICE); + desc = dmaengine_prep_slave_sg(i2c->dmach, &i2c->sg_io[0], 1, + DMA_MEM_TO_DEV, + DMA_PREP_INTERRUPT | DMA_CTRL_ACK); + if (!desc) { + dev_err(i2c->dev, + "Failed to get DMA data write descriptor.\n"); + goto select_init_dma_fail; + } + + /* + * READ command. + */ + + /* Queue the PIO register write transfer. */ + i2c->pio_data[1] = flags | MXS_CMD_I2C_READ | + MXS_I2C_CTRL0_XFER_COUNT(msg->len); + desc = dmaengine_prep_slave_sg(i2c->dmach, + (struct scatterlist *)&i2c->pio_data[1], + 1, DMA_TRANS_NONE, DMA_PREP_INTERRUPT); + if (!desc) { + dev_err(i2c->dev, + "Failed to get PIO reg. write descriptor.\n"); + goto select_init_dma_fail; + } + + /* Queue the DMA data transfer. */ + sg_init_one(&i2c->sg_io[1], msg->buf, msg->len); + dma_map_sg(i2c->dev, &i2c->sg_io[1], 1, DMA_FROM_DEVICE); + desc = dmaengine_prep_slave_sg(i2c->dmach, &i2c->sg_io[1], 1, + DMA_DEV_TO_MEM, + DMA_PREP_INTERRUPT | DMA_CTRL_ACK); + if (!desc) { + dev_err(i2c->dev, + "Failed to get DMA data write descriptor.\n"); + goto read_init_dma_fail; + } + } else { + i2c->dma_read = 0; + i2c->addr_data = (msg->addr << 1) | I2C_SMBUS_WRITE; + + /* + * WRITE command. + */ + + /* Queue the PIO register write transfer. */ + i2c->pio_data[0] = flags | MXS_CMD_I2C_WRITE | + MXS_I2C_CTRL0_XFER_COUNT(msg->len + 1); + desc = dmaengine_prep_slave_sg(i2c->dmach, + (struct scatterlist *)&i2c->pio_data[0], + 1, DMA_TRANS_NONE, 0); + if (!desc) { + dev_err(i2c->dev, + "Failed to get PIO reg. write descriptor.\n"); + goto write_init_pio_fail; + } + + /* Queue the DMA data transfer. */ + sg_init_table(i2c->sg_io, 2); + sg_set_buf(&i2c->sg_io[0], &i2c->addr_data, 1); + sg_set_buf(&i2c->sg_io[1], msg->buf, msg->len); + dma_map_sg(i2c->dev, i2c->sg_io, 2, DMA_TO_DEVICE); + desc = dmaengine_prep_slave_sg(i2c->dmach, i2c->sg_io, 2, + DMA_MEM_TO_DEV, + DMA_PREP_INTERRUPT | DMA_CTRL_ACK); + if (!desc) { + dev_err(i2c->dev, + "Failed to get DMA data write descriptor.\n"); + goto write_init_dma_fail; + } + } + + /* + * The last descriptor must have this callback, + * to finish the DMA transaction. + */ + desc->callback = mxs_i2c_dma_irq_callback; + desc->callback_param = i2c; + + /* Start the transfer. */ + dmaengine_submit(desc); + dma_async_issue_pending(i2c->dmach); + return 0; + +/* Read failpath. */ +read_init_dma_fail: + dma_unmap_sg(i2c->dev, &i2c->sg_io[1], 1, DMA_FROM_DEVICE); +select_init_dma_fail: + dma_unmap_sg(i2c->dev, &i2c->sg_io[0], 1, DMA_TO_DEVICE); +select_init_pio_fail: + return -EINVAL; + +/* Write failpath. */ +write_init_dma_fail: + dma_unmap_sg(i2c->dev, i2c->sg_io, 2, DMA_TO_DEVICE); +write_init_pio_fail: + return -EINVAL; +} + /* * Low level master read/write transaction. */ @@ -258,6 +421,8 @@ static int mxs_i2c_xfer_msg(struct i2c_adapter *adap, struct i2c_msg *msg, int ret; int flags; + flags = stop ? MXS_I2C_CTRL0_POST_SEND_STOP : 0; + dev_dbg(i2c->dev, "addr: 0x%04x, len: %d, flags: 0x%x, stop: %d\n", msg->addr, msg->len, msg->flags, stop); @@ -267,23 +432,29 @@ static int mxs_i2c_xfer_msg(struct i2c_adapter *adap, struct i2c_msg *msg, init_completion(&i2c->cmd_complete); i2c->cmd_err = 0; - flags = stop ? MXS_I2C_CTRL0_POST_SEND_STOP : 0; - - if (msg->flags & I2C_M_RD) - mxs_i2c_pioq_setup_read(i2c, msg->addr, msg->len, flags); - else - mxs_i2c_pioq_setup_write(i2c, msg->addr, msg->buf, msg->len, - flags); + if (i2c->dma_mode) { + ret = mxs_i2c_dma_setup_xfer(adap, msg, flags); + if (ret) + return ret; + } else { + if (msg->flags & I2C_M_RD) { + mxs_i2c_pioq_setup_read(i2c, msg->addr, + msg->len, flags); + } else { + mxs_i2c_pioq_setup_write(i2c, msg->addr, msg->buf, + msg->len, flags); + } - writel(MXS_I2C_QUEUECTRL_QUEUE_RUN, + writel(MXS_I2C_QUEUECTRL_QUEUE_RUN, i2c->regs + MXS_I2C_QUEUECTRL_SET); + } ret = wait_for_completion_timeout(&i2c->cmd_complete, msecs_to_jiffies(1000)); if (ret == 0) goto timeout; - if ((!i2c->cmd_err) && (msg->flags & I2C_M_RD)) { + if (!i2c->dma_mode && !i2c->cmd_err && (msg->flags & I2C_M_RD)) { ret = mxs_i2c_finish_read(i2c, msg->buf, msg->len); if (ret) goto timeout; @@ -301,6 +472,8 @@ static int mxs_i2c_xfer_msg(struct i2c_adapter *adap, struct i2c_msg *msg, timeout: dev_dbg(i2c->dev, "Timeout!\n"); + if (i2c->dma_mode) + mxs_i2c_dma_finish(i2c); mxs_i2c_reset(i2c); return -ETIMEDOUT; } @@ -342,11 +515,13 @@ static irqreturn_t mxs_i2c_isr(int this_irq, void *dev_id) /* MXS_I2C_CTRL1_OVERSIZE_XFER_TERM_IRQ is only for slaves */ i2c->cmd_err = -EIO; - is_last_cmd = (readl(i2c->regs + MXS_I2C_QUEUESTAT) & - MXS_I2C_QUEUESTAT_WRITE_QUEUE_CNT_MASK) == 0; + if (!i2c->dma_mode) { + is_last_cmd = (readl(i2c->regs + MXS_I2C_QUEUESTAT) & + MXS_I2C_QUEUESTAT_WRITE_QUEUE_CNT_MASK) == 0; - if (is_last_cmd || i2c->cmd_err) - complete(&i2c->cmd_complete); + if (is_last_cmd || i2c->cmd_err) + complete(&i2c->cmd_complete); + } writel(stat, i2c->regs + MXS_I2C_CTRL1_CLR); @@ -358,6 +533,21 @@ static const struct i2c_algorithm mxs_i2c_algo = { .functionality = mxs_i2c_func, }; +static bool mxs_i2c_dma_filter(struct dma_chan *chan, void *param) +{ + struct mxs_i2c_dev *i2c = param; + + if (!mxs_dma_is_apbx(chan)) + return false; + + if (chan->chan_id != i2c->dma_channel) + return false; + + chan->private = &i2c->dma_data; + + return true; +} + static int mxs_i2c_get_ofdata(struct mxs_i2c_dev *i2c) { uint32_t speed; @@ -365,6 +555,26 @@ static int mxs_i2c_get_ofdata(struct mxs_i2c_dev *i2c) struct device_node *node = dev->of_node; int ret; + /* + * The MXS I2C DMA mode is prefered and enabled by default. + * The PIO mode is still supported, but should be used only + * for debuging purposes etc. + */ + i2c->dma_mode = !use_pioqueue; + if (!i2c->dma_mode) + dev_info(dev, "Using PIOQUEUE mode for I2C transfers!\n"); + + /* + * TODO: This is a temporary solution and should be changed + * to use generic DMA binding later when the helpers get in. + */ + ret = of_property_read_u32(node, "fsl,i2c-dma-channel", + &i2c->dma_channel); + if (ret) { + dev_warn(dev, "Failed to get DMA channel, using PIOQUEUE!\n"); + i2c->dma_mode = 0; + } + ret = of_property_read_u32(node, "clock-frequency", &speed); if (ret) dev_warn(dev, "No I2C speed selected, using 100kHz\n"); @@ -384,7 +594,8 @@ static int __devinit mxs_i2c_probe(struct platform_device *pdev) struct pinctrl *pinctrl; struct resource *res; resource_size_t res_size; - int err, irq; + int err, irq, dmairq; + dma_cap_mask_t mask; pinctrl = devm_pinctrl_get_select_default(dev); if (IS_ERR(pinctrl)) @@ -395,7 +606,10 @@ static int __devinit mxs_i2c_probe(struct platform_device *pdev) return -ENOMEM; res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!res) + irq = platform_get_irq(pdev, 0); + dmairq = platform_get_irq(pdev, 1); + + if (!res || irq < 0 || dmairq < 0) return -ENOENT; res_size = resource_size(res); @@ -406,10 +620,6 @@ static int __devinit mxs_i2c_probe(struct platform_device *pdev) if (!i2c->regs) return -EBUSY; - irq = platform_get_irq(pdev, 0); - if (irq < 0) - return irq; - err = devm_request_irq(dev, irq, mxs_i2c_isr, 0, dev_name(dev), i2c); if (err) return err; @@ -423,6 +633,18 @@ static int __devinit mxs_i2c_probe(struct platform_device *pdev) return err; } + /* Setup the DMA */ + if (i2c->dma_mode) { + dma_cap_zero(mask); + dma_cap_set(DMA_SLAVE, mask); + i2c->dma_data.chan_irq = dmairq; + i2c->dmach = dma_request_channel(mask, mxs_i2c_dma_filter, i2c); + if (!i2c->dmach) { + dev_err(dev, "Failed to request dma\n"); + return -ENODEV; + } + } + platform_set_drvdata(pdev, i2c); /* Do reset to enforce correct startup after pinmuxing */ @@ -458,6 +680,9 @@ static int __devexit mxs_i2c_remove(struct platform_device *pdev) if (ret) return -EBUSY; + if (i2c->dmach) + dma_release_channel(i2c->dmach); + writel(MXS_I2C_CTRL0_SFTRST, i2c->regs + MXS_I2C_CTRL0_SET); platform_set_drvdata(pdev, NULL); -- cgit v0.10.2