From 040f6b4f14adb2ca5babb84e9fb2ebc6661e0be2 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Mon, 18 Jan 2010 07:22:23 +0000 Subject: tx493xide: use ->pio_mode value to determine pair device speed Use the current PIO mode value instead of the physical maximum one of the pair device on the port to determine PIO commmand timings used for both devices on the port. Signed-off-by: Bartlomiej Zolnierkiewicz Signed-off-by: David S. Miller diff --git a/drivers/ide/tx4938ide.c b/drivers/ide/tx4938ide.c index 326d468..1d80f1f 100644 --- a/drivers/ide/tx4938ide.c +++ b/drivers/ide/tx4938ide.c @@ -64,7 +64,7 @@ static void tx4938ide_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive) pair = ide_get_pair_dev(drive); if (pair) - safe = min(safe, ide_get_best_pio_mode(pair, 255, 5)); + safe = min(safe, pair->pio_mode - XFER_PIO_0); tx4938ide_tune_ebusc(pdata->ebus_ch, pdata->gbus_clock, safe); } diff --git a/drivers/ide/tx4939ide.c b/drivers/ide/tx4939ide.c index f210633..3c73677 100644 --- a/drivers/ide/tx4939ide.c +++ b/drivers/ide/tx4939ide.c @@ -114,7 +114,7 @@ static void tx4939ide_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive) pair = ide_get_pair_dev(drive); if (pair) - safe = min(safe, ide_get_best_pio_mode(pair, 255, 4)); + safe = min(safe, pair->pio_mode - XFER_PIO_0); /* * Update Command Transfer Mode for master/slave and Data * Transfer Mode for this drive. -- cgit v0.10.2