From 49c34b8e0f43a6a9179b9d9894868b911da8501e Mon Sep 17 00:00:00 2001 From: Jacek Anaszewski Date: Thu, 30 Apr 2015 03:34:57 -0700 Subject: leds: Add driver for AAT1290 flash LED controller This patch adds a driver for the 1.5A Step-Up Current Regulator for Flash LEDs. The device is programmed through a Skyworks proprietary AS2Cwire serial digital interface. Signed-off-by: Jacek Anaszewski Acked-by: Kyungmin Park Acked-by: Sakari Ailus Cc: Richard Purdie Signed-off-by: Bryan Wu diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig index 62be033..dd7834c 100644 --- a/drivers/leds/Kconfig +++ b/drivers/leds/Kconfig @@ -42,6 +42,14 @@ config LEDS_88PM860X This option enables support for on-chip LED drivers found on Marvell Semiconductor 88PM8606 PMIC. +config LEDS_AAT1290 + tristate "LED support for the AAT1290" + depends on LEDS_CLASS_FLASH + depends on GPIOLIB + depends on OF + help + This option enables support for the LEDs on the AAT1290. + config LEDS_LM3530 tristate "LCD Backlight driver for LM3530" depends on LEDS_CLASS diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile index 8bddae6..71f7c9a 100644 --- a/drivers/leds/Makefile +++ b/drivers/leds/Makefile @@ -7,6 +7,7 @@ obj-$(CONFIG_LEDS_TRIGGERS) += led-triggers.o # LED Platform Drivers obj-$(CONFIG_LEDS_88PM860X) += leds-88pm860x.o +obj-$(CONFIG_LEDS_AAT1290) += leds-aat1290.o obj-$(CONFIG_LEDS_BD2802) += leds-bd2802.o obj-$(CONFIG_LEDS_LOCOMO) += leds-locomo.o obj-$(CONFIG_LEDS_LM3530) += leds-lm3530.o diff --git a/drivers/leds/leds-aat1290.c b/drivers/leds/leds-aat1290.c new file mode 100644 index 0000000..6ea1d54 --- /dev/null +++ b/drivers/leds/leds-aat1290.c @@ -0,0 +1,451 @@ +/* + * LED Flash class driver for the AAT1290 + * 1.5A Step-Up Current Regulator for Flash LEDs + * + * Copyright (C) 2015, Samsung Electronics Co., Ltd. + * Author: Jacek Anaszewski + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define AAT1290_MOVIE_MODE_CURRENT_ADDR 17 +#define AAT1290_MAX_MM_CURR_PERCENT_0 16 +#define AAT1290_MAX_MM_CURR_PERCENT_100 1 + +#define AAT1290_FLASH_SAFETY_TIMER_ADDR 18 + +#define AAT1290_MOVIE_MODE_CONFIG_ADDR 19 +#define AAT1290_MOVIE_MODE_OFF 1 +#define AAT1290_MOVIE_MODE_ON 3 + +#define AAT1290_MM_CURRENT_RATIO_ADDR 20 +#define AAT1290_MM_TO_FL_1_92 1 + +#define AAT1290_MM_TO_FL_RATIO 1000 / 1920 +#define AAT1290_MAX_MM_CURRENT(fl_max) (fl_max * AAT1290_MM_TO_FL_RATIO) + +#define AAT1290_LATCH_TIME_MIN_US 500 +#define AAT1290_LATCH_TIME_MAX_US 1000 +#define AAT1290_EN_SET_TICK_TIME_US 1 +#define AAT1290_FLEN_OFF_DELAY_TIME_US 10 +#define AAT1290_FLASH_TM_NUM_LEVELS 16 +#define AAT1290_MM_CURRENT_SCALE_SIZE 15 + + +struct aat1290_led_config_data { + /* maximum LED current in movie mode */ + u32 max_mm_current; + /* maximum LED current in flash mode */ + u32 max_flash_current; + /* maximum flash timeout */ + u32 max_flash_tm; + /* max LED brightness level */ + enum led_brightness max_brightness; +}; + +struct aat1290_led { + /* platform device data */ + struct platform_device *pdev; + /* secures access to the device */ + struct mutex lock; + + /* corresponding LED Flash class device */ + struct led_classdev_flash fled_cdev; + + /* FLEN pin */ + struct gpio_desc *gpio_fl_en; + /* EN|SET pin */ + struct gpio_desc *gpio_en_set; + /* movie mode current scale */ + int *mm_current_scale; + /* device mode */ + bool movie_mode; + + /* brightness cache */ + unsigned int torch_brightness; + /* assures led-triggers compatibility */ + struct work_struct work_brightness_set; +}; + +static struct aat1290_led *fled_cdev_to_led( + struct led_classdev_flash *fled_cdev) +{ + return container_of(fled_cdev, struct aat1290_led, fled_cdev); +} + +static void aat1290_as2cwire_write(struct aat1290_led *led, int addr, int value) +{ + int i; + + gpiod_direction_output(led->gpio_fl_en, 0); + gpiod_direction_output(led->gpio_en_set, 0); + + udelay(AAT1290_FLEN_OFF_DELAY_TIME_US); + + /* write address */ + for (i = 0; i < addr; ++i) { + udelay(AAT1290_EN_SET_TICK_TIME_US); + gpiod_direction_output(led->gpio_en_set, 0); + udelay(AAT1290_EN_SET_TICK_TIME_US); + gpiod_direction_output(led->gpio_en_set, 1); + } + + usleep_range(AAT1290_LATCH_TIME_MIN_US, AAT1290_LATCH_TIME_MAX_US); + + /* write data */ + for (i = 0; i < value; ++i) { + udelay(AAT1290_EN_SET_TICK_TIME_US); + gpiod_direction_output(led->gpio_en_set, 0); + udelay(AAT1290_EN_SET_TICK_TIME_US); + gpiod_direction_output(led->gpio_en_set, 1); + } + + usleep_range(AAT1290_LATCH_TIME_MIN_US, AAT1290_LATCH_TIME_MAX_US); +} + +static void aat1290_set_flash_safety_timer(struct aat1290_led *led, + unsigned int micro_sec) +{ + struct led_classdev_flash *fled_cdev = &led->fled_cdev; + struct led_flash_setting *flash_tm = &fled_cdev->timeout; + int flash_tm_reg = AAT1290_FLASH_TM_NUM_LEVELS - + (micro_sec / flash_tm->step) + 1; + + aat1290_as2cwire_write(led, AAT1290_FLASH_SAFETY_TIMER_ADDR, + flash_tm_reg); +} + +static void aat1290_brightness_set(struct aat1290_led *led, + enum led_brightness brightness) +{ + mutex_lock(&led->lock); + + if (brightness == 0) { + gpiod_direction_output(led->gpio_fl_en, 0); + gpiod_direction_output(led->gpio_en_set, 0); + led->movie_mode = false; + } else { + if (!led->movie_mode) { + aat1290_as2cwire_write(led, + AAT1290_MM_CURRENT_RATIO_ADDR, + AAT1290_MM_TO_FL_1_92); + led->movie_mode = true; + } + + aat1290_as2cwire_write(led, AAT1290_MOVIE_MODE_CURRENT_ADDR, + AAT1290_MAX_MM_CURR_PERCENT_0 - brightness); + aat1290_as2cwire_write(led, AAT1290_MOVIE_MODE_CONFIG_ADDR, + AAT1290_MOVIE_MODE_ON); + } + + mutex_unlock(&led->lock); +} + +/* LED subsystem callbacks */ + +static void aat1290_brightness_set_work(struct work_struct *work) +{ + struct aat1290_led *led = + container_of(work, struct aat1290_led, work_brightness_set); + + aat1290_brightness_set(led, led->torch_brightness); +} + +static void aat1290_led_brightness_set(struct led_classdev *led_cdev, + enum led_brightness brightness) +{ + struct led_classdev_flash *fled_cdev = lcdev_to_flcdev(led_cdev); + struct aat1290_led *led = fled_cdev_to_led(fled_cdev); + + led->torch_brightness = brightness; + schedule_work(&led->work_brightness_set); +} + +static int aat1290_led_brightness_set_sync(struct led_classdev *led_cdev, + enum led_brightness brightness) +{ + struct led_classdev_flash *fled_cdev = lcdev_to_flcdev(led_cdev); + struct aat1290_led *led = fled_cdev_to_led(fled_cdev); + + aat1290_brightness_set(led, brightness); + + return 0; +} + +static int aat1290_led_flash_strobe_set(struct led_classdev_flash *fled_cdev, + bool state) + +{ + struct aat1290_led *led = fled_cdev_to_led(fled_cdev); + struct led_classdev *led_cdev = &fled_cdev->led_cdev; + struct led_flash_setting *timeout = &fled_cdev->timeout; + + mutex_lock(&led->lock); + + if (state) { + aat1290_set_flash_safety_timer(led, timeout->val); + gpiod_direction_output(led->gpio_fl_en, 1); + } else { + gpiod_direction_output(led->gpio_fl_en, 0); + gpiod_direction_output(led->gpio_en_set, 0); + } + + /* + * To reenter movie mode after a flash event the part must be cycled + * off and back on to reset the movie mode and reprogrammed via the + * AS2Cwire. Therefore the brightness and movie_mode properties needs + * to be updated here to reflect the actual state. + */ + led_cdev->brightness = 0; + led->movie_mode = false; + + mutex_unlock(&led->lock); + + return 0; +} + +static int aat1290_led_flash_timeout_set(struct led_classdev_flash *fled_cdev, + u32 timeout) +{ + /* + * Don't do anything - flash timeout is cached in the led-class-flash + * core and will be applied in the strobe_set op, as writing the + * safety timer register spuriously turns the torch mode on. + */ + + return 0; +} + +static int aat1290_led_parse_dt(struct aat1290_led *led, + struct aat1290_led_config_data *cfg) +{ + struct led_classdev *led_cdev = &led->fled_cdev.led_cdev; + struct device *dev = &led->pdev->dev; + struct device_node *child_node; + int ret = 0; + + led->gpio_fl_en = devm_gpiod_get(dev, "flen"); + if (IS_ERR(led->gpio_fl_en)) { + ret = PTR_ERR(led->gpio_fl_en); + dev_err(dev, "Unable to claim gpio \"flen\".\n"); + return ret; + } + + led->gpio_en_set = devm_gpiod_get(dev, "enset"); + if (IS_ERR(led->gpio_en_set)) { + ret = PTR_ERR(led->gpio_en_set); + dev_err(dev, "Unable to claim gpio \"enset\".\n"); + return ret; + } + + child_node = of_get_next_available_child(dev->of_node, NULL); + if (!child_node) { + dev_err(dev, "No DT child node found for connected LED.\n"); + return -EINVAL; + } + + led_cdev->name = of_get_property(child_node, "label", NULL) ? : + child_node->name; + + ret = of_property_read_u32(child_node, "led-max-microamp", + &cfg->max_mm_current); + /* + * led-max-microamp will default to 1/20 of flash-max-microamp + * in case it is missing. + */ + if (ret < 0) + dev_warn(dev, + "led-max-microamp DT property missing\n"); + + ret = of_property_read_u32(child_node, "flash-max-microamp", + &cfg->max_flash_current); + if (ret < 0) { + dev_err(dev, + "flash-max-microamp DT property missing\n"); + return ret; + } + + ret = of_property_read_u32(child_node, "flash-max-timeout-us", + &cfg->max_flash_tm); + if (ret < 0) { + dev_err(dev, + "flash-max-timeout-us DT property missing\n"); + return ret; + } + + of_node_put(child_node); + + return ret; +} + +static void aat1290_led_validate_mm_current(struct aat1290_led *led, + struct aat1290_led_config_data *cfg) +{ + int i, b = 0, e = AAT1290_MM_CURRENT_SCALE_SIZE; + + while (e - b > 1) { + i = b + (e - b) / 2; + if (cfg->max_mm_current < led->mm_current_scale[i]) + e = i; + else + b = i; + } + + cfg->max_mm_current = led->mm_current_scale[b]; + cfg->max_brightness = b + 1; +} + +int init_mm_current_scale(struct aat1290_led *led, + struct aat1290_led_config_data *cfg) +{ + int max_mm_current_percent[] = { 20, 22, 25, 28, 32, 36, 40, 45, 50, 56, + 63, 71, 79, 89, 100 }; + int i, max_mm_current = + AAT1290_MAX_MM_CURRENT(cfg->max_flash_current); + + led->mm_current_scale = kzalloc(sizeof(max_mm_current_percent), + GFP_KERNEL); + if (!led->mm_current_scale) + return -ENOMEM; + + for (i = 0; i < AAT1290_MM_CURRENT_SCALE_SIZE; ++i) + led->mm_current_scale[i] = max_mm_current * + max_mm_current_percent[i] / 100; + + return 0; +} + +static int aat1290_led_get_configuration(struct aat1290_led *led, + struct aat1290_led_config_data *cfg) +{ + int ret; + + ret = aat1290_led_parse_dt(led, cfg); + if (ret < 0) + return ret; + /* + * Init non-linear movie mode current scale basing + * on the max flash current from led configuration. + */ + ret = init_mm_current_scale(led, cfg); + if (ret < 0) + return ret; + + aat1290_led_validate_mm_current(led, cfg); + + kfree(led->mm_current_scale); + + return 0; +} + +static void aat1290_init_flash_timeout(struct aat1290_led *led, + struct aat1290_led_config_data *cfg) +{ + struct led_classdev_flash *fled_cdev = &led->fled_cdev; + struct led_flash_setting *setting; + + /* Init flash timeout setting */ + setting = &fled_cdev->timeout; + setting->min = cfg->max_flash_tm / AAT1290_FLASH_TM_NUM_LEVELS; + setting->max = cfg->max_flash_tm; + setting->step = setting->min; + setting->val = setting->max; +} + +static const struct led_flash_ops flash_ops = { + .strobe_set = aat1290_led_flash_strobe_set, + .timeout_set = aat1290_led_flash_timeout_set, +}; + +static int aat1290_led_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct aat1290_led *led; + struct led_classdev *led_cdev; + struct led_classdev_flash *fled_cdev; + struct aat1290_led_config_data led_cfg = {}; + int ret; + + led = devm_kzalloc(dev, sizeof(*led), GFP_KERNEL); + if (!led) + return -ENOMEM; + + led->pdev = pdev; + platform_set_drvdata(pdev, led); + + fled_cdev = &led->fled_cdev; + fled_cdev->ops = &flash_ops; + led_cdev = &fled_cdev->led_cdev; + + ret = aat1290_led_get_configuration(led, &led_cfg); + if (ret < 0) + return ret; + + mutex_init(&led->lock); + + /* Initialize LED Flash class device */ + led_cdev->brightness_set = aat1290_led_brightness_set; + led_cdev->brightness_set_sync = aat1290_led_brightness_set_sync; + led_cdev->max_brightness = led_cfg.max_brightness; + led_cdev->flags |= LED_DEV_CAP_FLASH; + INIT_WORK(&led->work_brightness_set, aat1290_brightness_set_work); + + aat1290_init_flash_timeout(led, &led_cfg); + + /* Register LED Flash class device */ + ret = led_classdev_flash_register(&pdev->dev, fled_cdev); + if (ret < 0) + goto err_flash_register; + + return 0; + +err_flash_register: + mutex_destroy(&led->lock); + + return ret; +} + +static int aat1290_led_remove(struct platform_device *pdev) +{ + struct aat1290_led *led = platform_get_drvdata(pdev); + + led_classdev_flash_unregister(&led->fled_cdev); + cancel_work_sync(&led->work_brightness_set); + + mutex_destroy(&led->lock); + + return 0; +} + +static const struct of_device_id aat1290_led_dt_match[] = { + { .compatible = "skyworks,aat1290" }, + {}, +}; + +static struct platform_driver aat1290_led_driver = { + .probe = aat1290_led_probe, + .remove = aat1290_led_remove, + .driver = { + .name = "aat1290", + .of_match_table = aat1290_led_dt_match, + }, +}; + +module_platform_driver(aat1290_led_driver); + +MODULE_AUTHOR("Jacek Anaszewski "); +MODULE_DESCRIPTION("Skyworks Current Regulator for Flash LEDs"); +MODULE_LICENSE("GPL v2"); -- cgit v0.10.2