From c0285f8ca8b8a4a1830b6071d6680bde447ff51c Mon Sep 17 00:00:00 2001 From: "Milo(Woogyom) Kim" Date: Tue, 5 Feb 2013 20:22:48 +0900 Subject: Documentation: leds: update LP55xx family devices Update changed platform data information. Add leds-lp55xx.txt which includes the firmware interface description. Signed-off-by: Milo(Woogyom) Kim Signed-off-by: Bryan Wu diff --git a/Documentation/leds/00-INDEX b/Documentation/leds/00-INDEX index 5fefe37..5246090 100644 --- a/Documentation/leds/00-INDEX +++ b/Documentation/leds/00-INDEX @@ -6,5 +6,7 @@ leds-lp5521.txt - notes on how to use the leds-lp5521 driver. leds-lp5523.txt - notes on how to use the leds-lp5523 driver. +leds-lp55xx.txt + - description about lp55xx common driver. leds-lm3556.txt - notes on how to use the leds-lm3556 driver. diff --git a/Documentation/leds/leds-lp5521.txt b/Documentation/leds/leds-lp5521.txt index 0e542ab..270f571 100644 --- a/Documentation/leds/leds-lp5521.txt +++ b/Documentation/leds/leds-lp5521.txt @@ -17,19 +17,8 @@ lp5521:channelx, where x is 0 .. 2 All three channels can be also controlled using the engine micro programs. More details of the instructions can be found from the public data sheet. -Control interface for the engines: -x is 1 .. 3 -enginex_mode : disabled, load, run -enginex_load : store program (visible only in engine load mode) - -Example (start to blink the channel 2 led): -cd /sys/class/leds/lp5521:channel2/device -echo "load" > engine3_mode -echo "037f4d0003ff6000" > engine3_load -echo "run" > engine3_mode - -stop the engine: -echo "disabled" > engine3_mode +LP5521 has the internal program memory for running various LED patterns. +For the details, please refer to 'firmware' section in leds-lp55xx.txt sysfs contains a selftest entry. The test communicates with the chip and checks that @@ -47,7 +36,7 @@ The name of each channel can be configurable. If the name field is not defined, the default name will be set to 'xxxx:channelN' (XXXX : pdata->label or i2c client name, N : channel number) -static struct lp5521_led_config lp5521_led_config[] = { +static struct lp55xx_led_config lp5521_led_config[] = { { .name = "red", .chan_nr = 0, @@ -81,10 +70,10 @@ static void lp5521_enable(bool state) /* Control of chip enable signal */ } -static struct lp5521_platform_data lp5521_platform_data = { +static struct lp55xx_platform_data lp5521_platform_data = { .led_config = lp5521_led_config, .num_channels = ARRAY_SIZE(lp5521_led_config), - .clock_mode = LP5521_CLOCK_EXT, + .clock_mode = LP55XX_CLOCK_EXT, .setup_resources = lp5521_setup, .release_resources = lp5521_release, .enable = lp5521_enable, @@ -105,47 +94,9 @@ example of update_config : LP5521_CP_MODE_AUTO | LP5521_R_TO_BATT | \ LP5521_CLK_INT) -static struct lp5521_platform_data lp5521_pdata = { +static struct lp55xx_platform_data lp5521_pdata = { .led_config = lp5521_led_config, .num_channels = ARRAY_SIZE(lp5521_led_config), - .clock_mode = LP5521_CLOCK_INT, + .clock_mode = LP55XX_CLOCK_INT, .update_config = LP5521_CONFIGS, }; - -LED patterns : LP5521 has autonomous operation without external control. -Pattern data can be defined in the platform data. - -example of led pattern data : - -/* RGB(50,5,0) 500ms on, 500ms off, infinite loop */ -static u8 pattern_red[] = { - 0x40, 0x32, 0x60, 0x00, 0x40, 0x00, 0x60, 0x00, - }; - -static u8 pattern_green[] = { - 0x40, 0x05, 0x60, 0x00, 0x40, 0x00, 0x60, 0x00, - }; - -static struct lp5521_led_pattern board_led_patterns[] = { - { - .r = pattern_red, - .g = pattern_green, - .size_r = ARRAY_SIZE(pattern_red), - .size_g = ARRAY_SIZE(pattern_green), - }, -}; - -static struct lp5521_platform_data lp5521_platform_data = { - .led_config = lp5521_led_config, - .num_channels = ARRAY_SIZE(lp5521_led_config), - .clock_mode = LP5521_CLOCK_EXT, - .patterns = board_led_patterns, - .num_patterns = ARRAY_SIZE(board_led_patterns), -}; - -Then predefined led pattern(s) can be executed via the sysfs. -To start the pattern #1, -# echo 1 > /sys/bus/i2c/devices/xxxx/led_pattern -(xxxx : i2c bus & slave address) -To end the pattern, -# echo 0 > /sys/bus/i2c/devices/xxxx/led_pattern diff --git a/Documentation/leds/leds-lp5523.txt b/Documentation/leds/leds-lp5523.txt index c2743f5..899fdad 100644 --- a/Documentation/leds/leds-lp5523.txt +++ b/Documentation/leds/leds-lp5523.txt @@ -27,25 +27,8 @@ c) Default If both fields are NULL, 'lp5523' is used by default. /sys/class/leds/lp5523:channelN (N: 0 ~ 8) -The chip provides 3 engines. Each engine can control channels without -interaction from the main CPU. Details of the micro engine code can be found -from the public data sheet. Leds can be muxed to different channels. - -Control interface for the engines: -x is 1 .. 3 -enginex_mode : disabled, load, run -enginex_load : microcode load (visible only in load mode) -enginex_leds : led mux control (visible only in load mode) - -cd /sys/class/leds/lp5523:channel2/device -echo "load" > engine3_mode -echo "9d80400004ff05ff437f0000" > engine3_load -echo "111111111" > engine3_leds -echo "run" > engine3_mode - -sysfs contains a selftest entry. It measures each channel -voltage level and checks if it looks reasonable. If the level is too high, -the led is missing; if the level is too low, there is a short circuit. +LP5523 has the internal program memory for running various LED patterns. +For the details, please refer to 'firmware' section in leds-lp55xx.txt Selftest uses always the current from the platform data. @@ -58,7 +41,7 @@ Example platform data: Note - chan_nr can have values between 0 and 8. -static struct lp5523_led_config lp5523_led_config[] = { +static struct lp55xx_led_config lp5523_led_config[] = { { .name = "D1", .chan_nr = 0, @@ -88,10 +71,10 @@ static void lp5523_enable(bool state) /* Control chip enable signal */ } -static struct lp5523_platform_data lp5523_platform_data = { +static struct lp55xx_platform_data lp5523_platform_data = { .led_config = lp5523_led_config, .num_channels = ARRAY_SIZE(lp5523_led_config), - .clock_mode = LP5523_CLOCK_EXT, + .clock_mode = LP55XX_CLOCK_EXT, .setup_resources = lp5523_setup, .release_resources = lp5523_release, .enable = lp5523_enable, diff --git a/Documentation/leds/leds-lp55xx.txt b/Documentation/leds/leds-lp55xx.txt new file mode 100644 index 0000000..ced4186 --- /dev/null +++ b/Documentation/leds/leds-lp55xx.txt @@ -0,0 +1,118 @@ +LP5521/LP5523/LP55231 Common Driver +=================================== + +Authors: Milo(Woogyom) Kim + +Description +----------- +LP5521, LP5523/55231 have common features as below. + + Register access via the I2C + Device initialization/deinitialization + Create LED class devices for multiple output channels + Device attributes for user-space interface + Program memory for running LED patterns + +The LP55xx common driver provides these features using exported functions. + lp55xx_init_device() / lp55xx_deinit_device() + lp55xx_register_leds() / lp55xx_unregister_leds() + lp55xx_regsister_sysfs() / lp55xx_unregister_sysfs() + +( Driver Structure Data ) + +In lp55xx common driver, two different data structure is used. + +o lp55xx_led + control multi output LED channels such as led current, channel index. +o lp55xx_chip + general chip control such like the I2C and platform data. + +For example, LP5521 has maximum 3 LED channels. +LP5523/55231 has 9 output channels. + +lp55xx_chip for LP5521 ... lp55xx_led #1 + lp55xx_led #2 + lp55xx_led #3 + +lp55xx_chip for LP5523 ... lp55xx_led #1 + lp55xx_led #2 + . + . + lp55xx_led #9 + +( Chip Dependent Code ) + +To support device specific configurations, special structure +'lpxx_device_config' is used. + + Maximum number of channels + Reset command, chip enable command + Chip specific initialization + Brightness control register access + Setting LED output current + Program memory address access for running patterns + Additional device specific attributes + +( Firmware Interface ) + +LP55xx family devices have the internal program memory for running +various LED patterns. +This pattern data is saved as a file in the user-land or +hex byte string is written into the memory through the I2C. +LP55xx common driver supports the firmware interface. + +LP55xx chips have three program engines. +To load and run the pattern, the programming sequence is following. + (1) Select an engine number (1/2/3) + (2) Mode change to load + (3) Write pattern data into selected area + (4) Mode change to run + +The LP55xx common driver provides simple interfaces as below. +select_engine : Select which engine is used for running program +run_engine : Start program which is loaded via the firmware interface +firmware : Load program data + +For example, run blinking pattern in engine #1 of LP5521 +echo 1 > /sys/bus/i2c/devices/xxxx/select_engine +echo 1 > /sys/class/firmware/lp5521/loading +echo "4000600040FF6000" > /sys/class/firmware/lp5521/data +echo 0 > /sys/class/firmware/lp5521/loading +echo 1 > /sys/bus/i2c/devices/xxxx/run_engine + +For example, run blinking pattern in engine #3 of LP55231 +echo 3 > /sys/bus/i2c/devices/xxxx/select_engine +echo 1 > /sys/class/firmware/lp55231/loading +echo "9d0740ff7e0040007e00a0010000" > /sys/class/firmware/lp55231/data +echo 0 > /sys/class/firmware/lp55231/loading +echo 1 > /sys/bus/i2c/devices/xxxx/run_engine + +To start blinking patterns in engine #2 and #3 simultaneously, +for idx in 2 3 +do + echo $idx > /sys/class/leds/red/device/select_engine + sleep 0.1 + echo 1 > /sys/class/firmware/lp5521/loading + echo "4000600040FF6000" > /sys/class/firmware/lp5521/data + echo 0 > /sys/class/firmware/lp5521/loading +done +echo 1 > /sys/class/leds/red/device/run_engine + +Here is another example for LP5523. +echo 2 > /sys/bus/i2c/devices/xxxx/select_engine +echo 1 > /sys/class/firmware/lp5523/loading +echo "9d80400004ff05ff437f0000" > /sys/class/firmware/lp5523/data +echo 0 > /sys/class/firmware/lp5523/loading +echo 1 > /sys/bus/i2c/devices/xxxx/run_engine + +As soon as 'loading' is set to 0, registered callback is called. +Inside the callback, the selected engine is loaded and memory is updated. +To run programmed pattern, 'run_engine' attribute should be enabled. + +( 'run_engine' and 'firmware_cb' ) +The sequence of running the program data is common. +But each device has own specific register addresses for commands. +To support this, 'run_engine' and 'firmware_cb' are configurable in each driver. +run_engine : Control the selected engine +firmware_cb : The callback function after loading the firmware is done. + Chip specific commands for loading and updating program memory. -- cgit v0.10.2