From 7bcdca95c039d1cd1cfddd6aa012026b409ddb14 Mon Sep 17 00:00:00 2001
From: Alexander Clouter <alex@digriz.org.uk>
Date: Sun, 6 Mar 2011 10:04:31 +0000
Subject: ARM: orion5x: replace printk with pr_{err,info,...} in ts78xx-setup.c

Signed-off-by: Alexander Clouter <alex@digriz.org.uk>
Signed-off-by: Nicolas Pitre <nico@fluxnic.net>

diff --git a/arch/arm/mach-orion5x/ts78xx-setup.c b/arch/arm/mach-orion5x/ts78xx-setup.c
index 8554707..edb1dd2 100644
--- a/arch/arm/mach-orion5x/ts78xx-setup.c
+++ b/arch/arm/mach-orion5x/ts78xx-setup.c
@@ -402,7 +402,7 @@ static void ts78xx_fpga_supports(void)
 		/* enable devices if magic matches */
 		switch ((ts78xx_fpga.id >> 8) & 0xffffff) {
 		case TS7800_FPGA_MAGIC:
-			printk(KERN_WARNING "TS-7800 FPGA: unrecognized revision 0x%.2x\n",
+			pr_warning("TS-7800 FPGA: unrecognized revision 0x%.2x\n",
 					ts78xx_fpga.id & 0xff);
 			ts78xx_fpga.supports.ts_rtc.present = 1;
 			ts78xx_fpga.supports.ts_nand.present = 1;
@@ -423,7 +423,7 @@ static int ts78xx_fpga_load_devices(void)
 	if (ts78xx_fpga.supports.ts_rtc.present == 1) {
 		tmp = ts78xx_ts_rtc_load();
 		if (tmp) {
-			printk(KERN_INFO "TS-78xx: RTC not registered\n");
+			pr_info("TS-78xx: RTC not registered\n");
 			ts78xx_fpga.supports.ts_rtc.present = 0;
 		}
 		ret |= tmp;
@@ -431,7 +431,7 @@ static int ts78xx_fpga_load_devices(void)
 	if (ts78xx_fpga.supports.ts_nand.present == 1) {
 		tmp = ts78xx_ts_nand_load();
 		if (tmp) {
-			printk(KERN_INFO "TS-78xx: NAND not registered\n");
+			pr_info("TS-78xx: NAND not registered\n");
 			ts78xx_fpga.supports.ts_nand.present = 0;
 		}
 		ret |= tmp;
@@ -439,7 +439,7 @@ static int ts78xx_fpga_load_devices(void)
 	if (ts78xx_fpga.supports.ts_rng.present == 1) {
 		tmp = ts78xx_ts_rng_load();
 		if (tmp) {
-			printk(KERN_INFO "TS-78xx: RNG not registered\n");
+			pr_info("TS-78xx: RNG not registered\n");
 			ts78xx_fpga.supports.ts_rng.present = 0;
 		}
 		ret |= tmp;
@@ -466,7 +466,7 @@ static int ts78xx_fpga_load(void)
 {
 	ts78xx_fpga.id = readl(TS78XX_FPGA_REGS_VIRT_BASE);
 
-	printk(KERN_INFO "TS-78xx FPGA: magic=0x%.6x, rev=0x%.2x\n",
+	pr_info("TS-78xx FPGA: magic=0x%.6x, rev=0x%.2x\n",
 			(ts78xx_fpga.id >> 8) & 0xffffff,
 			ts78xx_fpga.id & 0xff);
 
@@ -494,7 +494,7 @@ static int ts78xx_fpga_unload(void)
 	 * UrJTAG SVN since r1381 can be used to reprogram the FPGA
 	 */
 	if (ts78xx_fpga.id != fpga_id) {
-		printk(KERN_ERR	"TS-78xx FPGA: magic/rev mismatch\n"
+		pr_err("TS-78xx FPGA: magic/rev mismatch\n"
 			"TS-78xx FPGA: was 0x%.6x/%.2x but now 0x%.6x/%.2x\n",
 			(ts78xx_fpga.id >> 8) & 0xffffff, ts78xx_fpga.id & 0xff,
 			(fpga_id >> 8) & 0xffffff, fpga_id & 0xff);
@@ -525,7 +525,7 @@ static ssize_t ts78xx_fpga_store(struct kobject *kobj,
 	int value, ret;
 
 	if (ts78xx_fpga.state < 0) {
-		printk(KERN_ERR "TS-78xx FPGA: borked, you must powercycle asap\n");
+		pr_err("TS-78xx FPGA: borked, you must powercycle asap\n");
 		return -EBUSY;
 	}
 
@@ -534,7 +534,7 @@ static ssize_t ts78xx_fpga_store(struct kobject *kobj,
 	else if (strncmp(buf, "offline", sizeof("offline") - 1) == 0)
 		value = 0;
 	else {
-		printk(KERN_ERR "ts78xx_fpga_store: Invalid value\n");
+		pr_err("ts78xx_fpga_store: Invalid value\n");
 		return -EINVAL;
 	}
 
@@ -616,7 +616,7 @@ static void __init ts78xx_init(void)
 	ret = ts78xx_fpga_load();
 	ret = sysfs_create_file(power_kobj, &ts78xx_fpga_attr.attr);
 	if (ret)
-		printk(KERN_ERR "sysfs_create_file failed: %d\n", ret);
+		pr_err("sysfs_create_file failed: %d\n", ret);
 }
 
 MACHINE_START(TS78XX, "Technologic Systems TS-78xx SBC")
-- 
cgit v0.10.2


From 7428fff20494935b4ce767d7c80de077e8d1d745 Mon Sep 17 00:00:00 2001
From: Marek Vasut <marek.vasut@gmail.com>
Date: Sat, 15 Jan 2011 17:55:45 +0100
Subject: ARM: pxa: PalmTE2: Use gpio arrays in backlight init

Use gpio_request_array() / gpio_free_array() in backlight init and exit
functions. This makes the code cleaner and less error prone.

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>

diff --git a/arch/arm/mach-pxa/palmte2.c b/arch/arm/mach-pxa/palmte2.c
index 3f25014..66311c7 100644
--- a/arch/arm/mach-pxa/palmte2.c
+++ b/arch/arm/mach-pxa/palmte2.c
@@ -136,30 +136,14 @@ static struct platform_device palmte2_pxa_keys = {
 /******************************************************************************
  * Backlight
  ******************************************************************************/
+static struct gpio palmte_bl_gpios[] = {
+	{ GPIO_NR_PALMTE2_BL_POWER, GPIOF_INIT_LOW, "Backlight power" },
+	{ GPIO_NR_PALMTE2_LCD_POWER, GPIOF_INIT_LOW, "LCD power" },
+};
+
 static int palmte2_backlight_init(struct device *dev)
 {
-	int ret;
-
-	ret = gpio_request(GPIO_NR_PALMTE2_BL_POWER, "BL POWER");
-	if (ret)
-		goto err;
-	ret = gpio_direction_output(GPIO_NR_PALMTE2_BL_POWER, 0);
-	if (ret)
-		goto err2;
-	ret = gpio_request(GPIO_NR_PALMTE2_LCD_POWER, "LCD POWER");
-	if (ret)
-		goto err2;
-	ret = gpio_direction_output(GPIO_NR_PALMTE2_LCD_POWER, 0);
-	if (ret)
-		goto err3;
-
-	return 0;
-err3:
-	gpio_free(GPIO_NR_PALMTE2_LCD_POWER);
-err2:
-	gpio_free(GPIO_NR_PALMTE2_BL_POWER);
-err:
-	return ret;
+	return gpio_request_array(ARRAY_AND_SIZE(palmte_bl_gpios));
 }
 
 static int palmte2_backlight_notify(struct device *dev, int brightness)
@@ -171,8 +155,7 @@ static int palmte2_backlight_notify(struct device *dev, int brightness)
 
 static void palmte2_backlight_exit(struct device *dev)
 {
-	gpio_free(GPIO_NR_PALMTE2_BL_POWER);
-	gpio_free(GPIO_NR_PALMTE2_LCD_POWER);
+	gpio_free_array(ARRAY_AND_SIZE(palmte_bl_gpios));
 }
 
 static struct platform_pwm_backlight_data palmte2_backlight_data = {
-- 
cgit v0.10.2


From e593106ca409e5e37d18121d922fc4f449c60d41 Mon Sep 17 00:00:00 2001
From: Marek Vasut <marek.vasut@gmail.com>
Date: Sat, 15 Jan 2011 18:40:49 +0100
Subject: ARM: pxa: Use gpio arrays in colibri_pcmcia driver

Use gpio_request_array() / gpio_free_array(), this makes the code cleaner and
less error prone.

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>

diff --git a/drivers/pcmcia/pxa2xx_colibri.c b/drivers/pcmcia/pxa2xx_colibri.c
index a520395..443cb7f 100644
--- a/drivers/pcmcia/pxa2xx_colibri.c
+++ b/drivers/pcmcia/pxa2xx_colibri.c
@@ -34,14 +34,24 @@
 #define	COLIBRI320_DETECT_GPIO	81
 #define	COLIBRI320_READY_GPIO	29
 
-static struct {
-	int	reset_gpio;
-	int	ppen_gpio;
-	int	bvd1_gpio;
-	int	bvd2_gpio;
-	int	detect_gpio;
-	int	ready_gpio;
-} colibri_pcmcia_gpio;
+enum {
+	DETECT = 0,
+	READY = 1,
+	BVD1 = 2,
+	BVD2 = 3,
+	PPEN = 4,
+	RESET = 5,
+};
+
+/* Contents of this array are configured on-the-fly in init function */
+static struct gpio colibri_pcmcia_gpios[] = {
+	{ 0,	GPIOF_IN,	"PCMCIA Detect" },
+	{ 0,	GPIOF_IN,	"PCMCIA Ready" },
+	{ 0,	GPIOF_IN,	"PCMCIA BVD1" },
+	{ 0,	GPIOF_IN,	"PCMCIA BVD2" },
+	{ 0,	GPIOF_INIT_LOW,	"PCMCIA PPEN" },
+	{ 0,	GPIOF_INIT_HIGH,"PCMCIA Reset" },
+};
 
 static struct pcmcia_irqs colibri_irqs[] = {
 	{
@@ -54,88 +64,42 @@ static int colibri_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
 {
 	int ret;
 
-	ret = gpio_request(colibri_pcmcia_gpio.detect_gpio, "DETECT");
+	ret = gpio_request_array(colibri_pcmcia_gpios,
+				ARRAY_SIZE(colibri_pcmcia_gpios));
 	if (ret)
 		goto err1;
-	ret = gpio_direction_input(colibri_pcmcia_gpio.detect_gpio);
-	if (ret)
-		goto err2;
-
-	ret = gpio_request(colibri_pcmcia_gpio.ready_gpio, "READY");
-	if (ret)
-		goto err2;
-	ret = gpio_direction_input(colibri_pcmcia_gpio.ready_gpio);
-	if (ret)
-		goto err3;
 
-	ret = gpio_request(colibri_pcmcia_gpio.bvd1_gpio, "BVD1");
-	if (ret)
-		goto err3;
-	ret = gpio_direction_input(colibri_pcmcia_gpio.bvd1_gpio);
-	if (ret)
-		goto err4;
+	colibri_irqs[0].irq = gpio_to_irq(colibri_pcmcia_gpios[DETECT].gpio);
+	skt->socket.pci_irq = gpio_to_irq(colibri_pcmcia_gpios[READY].gpio);
 
-	ret = gpio_request(colibri_pcmcia_gpio.bvd2_gpio, "BVD2");
-	if (ret)
-		goto err4;
-	ret = gpio_direction_input(colibri_pcmcia_gpio.bvd2_gpio);
-	if (ret)
-		goto err5;
-
-	ret = gpio_request(colibri_pcmcia_gpio.ppen_gpio, "PPEN");
-	if (ret)
-		goto err5;
-	ret = gpio_direction_output(colibri_pcmcia_gpio.ppen_gpio, 0);
-	if (ret)
-		goto err6;
-
-	ret = gpio_request(colibri_pcmcia_gpio.reset_gpio, "RESET");
-	if (ret)
-		goto err6;
-	ret = gpio_direction_output(colibri_pcmcia_gpio.reset_gpio, 1);
+	ret = soc_pcmcia_request_irqs(skt, colibri_irqs,
+					ARRAY_SIZE(colibri_irqs));
 	if (ret)
-		goto err7;
-
-	colibri_irqs[0].irq = gpio_to_irq(colibri_pcmcia_gpio.detect_gpio);
-	skt->socket.pci_irq = gpio_to_irq(colibri_pcmcia_gpio.ready_gpio);
+		goto err2;
 
-	return soc_pcmcia_request_irqs(skt, colibri_irqs,
-					ARRAY_SIZE(colibri_irqs));
+	return ret;
 
-err7:
-	gpio_free(colibri_pcmcia_gpio.detect_gpio);
-err6:
-	gpio_free(colibri_pcmcia_gpio.ready_gpio);
-err5:
-	gpio_free(colibri_pcmcia_gpio.bvd1_gpio);
-err4:
-	gpio_free(colibri_pcmcia_gpio.bvd2_gpio);
-err3:
-	gpio_free(colibri_pcmcia_gpio.reset_gpio);
 err2:
-	gpio_free(colibri_pcmcia_gpio.ppen_gpio);
+	gpio_free_array(colibri_pcmcia_gpios,
+			ARRAY_SIZE(colibri_pcmcia_gpios));
 err1:
 	return ret;
 }
 
 static void colibri_pcmcia_hw_shutdown(struct soc_pcmcia_socket *skt)
 {
-	gpio_free(colibri_pcmcia_gpio.detect_gpio);
-	gpio_free(colibri_pcmcia_gpio.ready_gpio);
-	gpio_free(colibri_pcmcia_gpio.bvd1_gpio);
-	gpio_free(colibri_pcmcia_gpio.bvd2_gpio);
-	gpio_free(colibri_pcmcia_gpio.reset_gpio);
-	gpio_free(colibri_pcmcia_gpio.ppen_gpio);
+	gpio_free_array(colibri_pcmcia_gpios,
+			ARRAY_SIZE(colibri_pcmcia_gpios));
 }
 
 static void colibri_pcmcia_socket_state(struct soc_pcmcia_socket *skt,
 					struct pcmcia_state *state)
 {
 
-	state->detect = !!gpio_get_value(colibri_pcmcia_gpio.detect_gpio);
-	state->ready  = !!gpio_get_value(colibri_pcmcia_gpio.ready_gpio);
-	state->bvd1   = !!gpio_get_value(colibri_pcmcia_gpio.bvd1_gpio);
-	state->bvd2   = !!gpio_get_value(colibri_pcmcia_gpio.bvd2_gpio);
+	state->detect = !!gpio_get_value(colibri_pcmcia_gpios[DETECT].gpio);
+	state->ready  = !!gpio_get_value(colibri_pcmcia_gpios[READY].gpio);
+	state->bvd1   = !!gpio_get_value(colibri_pcmcia_gpios[BVD1].gpio);
+	state->bvd2   = !!gpio_get_value(colibri_pcmcia_gpios[BVD2].gpio);
 	state->wrprot = 0;
 	state->vs_3v  = 1;
 	state->vs_Xv  = 0;
@@ -145,9 +109,10 @@ static int
 colibri_pcmcia_configure_socket(struct soc_pcmcia_socket *skt,
 				const socket_state_t *state)
 {
-	gpio_set_value(colibri_pcmcia_gpio.ppen_gpio,
+	gpio_set_value(colibri_pcmcia_gpios[PPEN].gpio,
 			!(state->Vcc == 33 && state->Vpp < 50));
-	gpio_set_value(colibri_pcmcia_gpio.reset_gpio, state->flags & SS_RESET);
+	gpio_set_value(colibri_pcmcia_gpios[RESET].gpio,
+			state->flags & SS_RESET);
 	return 0;
 }
 
@@ -190,20 +155,20 @@ static int __init colibri_pcmcia_init(void)
 
 	/* Colibri PXA270 */
 	if (machine_is_colibri()) {
-		colibri_pcmcia_gpio.reset_gpio	= COLIBRI270_RESET_GPIO;
-		colibri_pcmcia_gpio.ppen_gpio	= COLIBRI270_PPEN_GPIO;
-		colibri_pcmcia_gpio.bvd1_gpio	= COLIBRI270_BVD1_GPIO;
-		colibri_pcmcia_gpio.bvd2_gpio	= COLIBRI270_BVD2_GPIO;
-		colibri_pcmcia_gpio.detect_gpio	= COLIBRI270_DETECT_GPIO;
-		colibri_pcmcia_gpio.ready_gpio	= COLIBRI270_READY_GPIO;
+		colibri_pcmcia_gpios[RESET].gpio	= COLIBRI270_RESET_GPIO;
+		colibri_pcmcia_gpios[PPEN].gpio		= COLIBRI270_PPEN_GPIO;
+		colibri_pcmcia_gpios[BVD1].gpio		= COLIBRI270_BVD1_GPIO;
+		colibri_pcmcia_gpios[BVD2].gpio		= COLIBRI270_BVD2_GPIO;
+		colibri_pcmcia_gpios[DETECT].gpio	= COLIBRI270_DETECT_GPIO;
+		colibri_pcmcia_gpios[READY].gpio	= COLIBRI270_READY_GPIO;
 	/* Colibri PXA320 */
 	} else if (machine_is_colibri320()) {
-		colibri_pcmcia_gpio.reset_gpio	= COLIBRI320_RESET_GPIO;
-		colibri_pcmcia_gpio.ppen_gpio	= COLIBRI320_PPEN_GPIO;
-		colibri_pcmcia_gpio.bvd1_gpio	= COLIBRI320_BVD1_GPIO;
-		colibri_pcmcia_gpio.bvd2_gpio	= COLIBRI320_BVD2_GPIO;
-		colibri_pcmcia_gpio.detect_gpio	= COLIBRI320_DETECT_GPIO;
-		colibri_pcmcia_gpio.ready_gpio	= COLIBRI320_READY_GPIO;
+		colibri_pcmcia_gpios[RESET].gpio	= COLIBRI320_RESET_GPIO;
+		colibri_pcmcia_gpios[PPEN].gpio		= COLIBRI320_PPEN_GPIO;
+		colibri_pcmcia_gpios[BVD1].gpio		= COLIBRI320_BVD1_GPIO;
+		colibri_pcmcia_gpios[BVD2].gpio		= COLIBRI320_BVD2_GPIO;
+		colibri_pcmcia_gpios[DETECT].gpio	= COLIBRI320_DETECT_GPIO;
+		colibri_pcmcia_gpios[READY].gpio	= COLIBRI320_READY_GPIO;
 	}
 
 	ret = platform_device_add_data(colibri_pcmcia_device,
-- 
cgit v0.10.2


From 2070417dffa9e75b370a5c0dee8c5dc3605e1c4d Mon Sep 17 00:00:00 2001
From: Marek Vasut <marek.vasut@gmail.com>
Date: Sat, 15 Jan 2011 18:49:07 +0100
Subject: ARM: pxa: Use gpio arrays in palmld_pcmcia driver

Use gpio_request_array() / gpio_free_array(), this makes the code
cleaner and less error prone.

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>

diff --git a/drivers/pcmcia/pxa2xx_palmld.c b/drivers/pcmcia/pxa2xx_palmld.c
index 6fb6f7f..59f8405 100644
--- a/drivers/pcmcia/pxa2xx_palmld.c
+++ b/drivers/pcmcia/pxa2xx_palmld.c
@@ -20,49 +20,27 @@
 #include <mach/palmld.h>
 #include "soc_common.h"
 
+static struct gpio palmld_pcmcia_gpios[] = {
+	{ GPIO_NR_PALMLD_PCMCIA_POWER,	GPIOF_INIT_LOW,	"PCMCIA Power" },
+	{ GPIO_NR_PALMLD_PCMCIA_RESET,	GPIOF_INIT_HIGH,"PCMCIA Reset" },
+	{ GPIO_NR_PALMLD_PCMCIA_READY,	GPIOF_IN,	"PCMCIA Ready" },
+};
+
 static int palmld_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
 {
 	int ret;
 
-	ret = gpio_request(GPIO_NR_PALMLD_PCMCIA_POWER, "PCMCIA PWR");
-	if (ret)
-		goto err1;
-	ret = gpio_direction_output(GPIO_NR_PALMLD_PCMCIA_POWER, 0);
-	if (ret)
-		goto err2;
-
-	ret = gpio_request(GPIO_NR_PALMLD_PCMCIA_RESET, "PCMCIA RST");
-	if (ret)
-		goto err2;
-	ret = gpio_direction_output(GPIO_NR_PALMLD_PCMCIA_RESET, 1);
-	if (ret)
-		goto err3;
-
-	ret = gpio_request(GPIO_NR_PALMLD_PCMCIA_READY, "PCMCIA RDY");
-	if (ret)
-		goto err3;
-	ret = gpio_direction_input(GPIO_NR_PALMLD_PCMCIA_READY);
-	if (ret)
-		goto err4;
+	ret = gpio_request_array(palmld_pcmcia_gpios,
+				ARRAY_SIZE(palmld_pcmcia_gpios));
 
 	skt->socket.pci_irq = IRQ_GPIO(GPIO_NR_PALMLD_PCMCIA_READY);
-	return 0;
 
-err4:
-	gpio_free(GPIO_NR_PALMLD_PCMCIA_READY);
-err3:
-	gpio_free(GPIO_NR_PALMLD_PCMCIA_RESET);
-err2:
-	gpio_free(GPIO_NR_PALMLD_PCMCIA_POWER);
-err1:
 	return ret;
 }
 
 static void palmld_pcmcia_hw_shutdown(struct soc_pcmcia_socket *skt)
 {
-	gpio_free(GPIO_NR_PALMLD_PCMCIA_READY);
-	gpio_free(GPIO_NR_PALMLD_PCMCIA_RESET);
-	gpio_free(GPIO_NR_PALMLD_PCMCIA_POWER);
+	gpio_free_array(palmld_pcmcia_gpios, ARRAY_SIZE(palmld_pcmcia_gpios));
 }
 
 static void palmld_pcmcia_socket_state(struct soc_pcmcia_socket *skt,
-- 
cgit v0.10.2


From ba388307946cf86050d63cd398b4b341e2fb5043 Mon Sep 17 00:00:00 2001
From: Marek Vasut <marek.vasut@gmail.com>
Date: Sat, 15 Jan 2011 18:59:43 +0100
Subject: ARM: pxa: Use gpio arrays in palmtc_pcmcia driver

Use gpio_request_array() / gpio_free_array(), this makes the code
cleaner and less error prone.

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>

diff --git a/drivers/pcmcia/pxa2xx_palmtc.c b/drivers/pcmcia/pxa2xx_palmtc.c
index 459a232..e655af9 100644
--- a/drivers/pcmcia/pxa2xx_palmtc.c
+++ b/drivers/pcmcia/pxa2xx_palmtc.c
@@ -21,79 +21,30 @@
 #include <mach/palmtc.h>
 #include "soc_common.h"
 
+static struct gpio palmtc_pcmcia_gpios[] = {
+	{ GPIO_NR_PALMTC_PCMCIA_POWER1,	GPIOF_INIT_LOW,	"PCMCIA Power 1" },
+	{ GPIO_NR_PALMTC_PCMCIA_POWER2,	GPIOF_INIT_LOW,	"PCMCIA Power 2" },
+	{ GPIO_NR_PALMTC_PCMCIA_POWER3,	GPIOF_INIT_LOW,	"PCMCIA Power 3" },
+	{ GPIO_NR_PALMTC_PCMCIA_RESET,	GPIOF_INIT_HIGH,"PCMCIA Reset" },
+	{ GPIO_NR_PALMTC_PCMCIA_READY,	GPIOF_IN,	"PCMCIA Ready" },
+	{ GPIO_NR_PALMTC_PCMCIA_PWRREADY, GPIOF_IN,	"PCMCIA Power Ready" },
+};
+
 static int palmtc_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
 {
 	int ret;
 
-	ret = gpio_request(GPIO_NR_PALMTC_PCMCIA_POWER1, "PCMCIA PWR1");
-	if (ret)
-		goto err1;
-	ret = gpio_direction_output(GPIO_NR_PALMTC_PCMCIA_POWER1, 0);
-	if (ret)
-		goto err2;
-
-	ret = gpio_request(GPIO_NR_PALMTC_PCMCIA_POWER2, "PCMCIA PWR2");
-	if (ret)
-		goto err2;
-	ret = gpio_direction_output(GPIO_NR_PALMTC_PCMCIA_POWER2, 0);
-	if (ret)
-		goto err3;
-
-	ret = gpio_request(GPIO_NR_PALMTC_PCMCIA_POWER3, "PCMCIA PWR3");
-	if (ret)
-		goto err3;
-	ret = gpio_direction_output(GPIO_NR_PALMTC_PCMCIA_POWER3, 0);
-	if (ret)
-		goto err4;
-
-	ret = gpio_request(GPIO_NR_PALMTC_PCMCIA_RESET, "PCMCIA RST");
-	if (ret)
-		goto err4;
-	ret = gpio_direction_output(GPIO_NR_PALMTC_PCMCIA_RESET, 1);
-	if (ret)
-		goto err5;
-
-	ret = gpio_request(GPIO_NR_PALMTC_PCMCIA_READY, "PCMCIA RDY");
-	if (ret)
-		goto err5;
-	ret = gpio_direction_input(GPIO_NR_PALMTC_PCMCIA_READY);
-	if (ret)
-		goto err6;
-
-	ret = gpio_request(GPIO_NR_PALMTC_PCMCIA_PWRREADY, "PCMCIA PWRRDY");
-	if (ret)
-		goto err6;
-	ret = gpio_direction_input(GPIO_NR_PALMTC_PCMCIA_PWRREADY);
-	if (ret)
-		goto err7;
+	ret = gpio_request_array(palmtc_pcmcia_gpios,
+				ARRAY_SIZE(palmtc_pcmcia_gpios));
 
 	skt->socket.pci_irq = IRQ_GPIO(GPIO_NR_PALMTC_PCMCIA_READY);
-	return 0;
 
-err7:
-	gpio_free(GPIO_NR_PALMTC_PCMCIA_PWRREADY);
-err6:
-	gpio_free(GPIO_NR_PALMTC_PCMCIA_READY);
-err5:
-	gpio_free(GPIO_NR_PALMTC_PCMCIA_RESET);
-err4:
-	gpio_free(GPIO_NR_PALMTC_PCMCIA_POWER3);
-err3:
-	gpio_free(GPIO_NR_PALMTC_PCMCIA_POWER2);
-err2:
-	gpio_free(GPIO_NR_PALMTC_PCMCIA_POWER1);
-err1:
 	return ret;
 }
 
 static void palmtc_pcmcia_hw_shutdown(struct soc_pcmcia_socket *skt)
 {
-	gpio_free(GPIO_NR_PALMTC_PCMCIA_PWRREADY);
-	gpio_free(GPIO_NR_PALMTC_PCMCIA_READY);
-	gpio_free(GPIO_NR_PALMTC_PCMCIA_RESET);
-	gpio_free(GPIO_NR_PALMTC_PCMCIA_POWER3);
-	gpio_free(GPIO_NR_PALMTC_PCMCIA_POWER2);
-	gpio_free(GPIO_NR_PALMTC_PCMCIA_POWER1);
+	gpio_free_array(palmtc_pcmcia_gpios, ARRAY_SIZE(palmtc_pcmcia_gpios));
 }
 
 static void palmtc_pcmcia_socket_state(struct soc_pcmcia_socket *skt,
-- 
cgit v0.10.2


From 235a175c401ab2d79d63f08257acebe1558a0621 Mon Sep 17 00:00:00 2001
From: Marek Vasut <marek.vasut@gmail.com>
Date: Sat, 15 Jan 2011 18:59:55 +0100
Subject: ARM: pxa: Use gpio arrays in palmtx_pcmcia driver

Use gpio_request_array() / gpio_free_array(), this makes the code
cleaner and less error prone.

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>

diff --git a/drivers/pcmcia/pxa2xx_palmtx.c b/drivers/pcmcia/pxa2xx_palmtx.c
index b07b247..06f7f14 100644
--- a/drivers/pcmcia/pxa2xx_palmtx.c
+++ b/drivers/pcmcia/pxa2xx_palmtx.c
@@ -13,67 +13,34 @@
 
 #include <linux/module.h>
 #include <linux/platform_device.h>
+#include <linux/gpio.h>
 
 #include <asm/mach-types.h>
-
-#include <mach/gpio.h>
 #include <mach/palmtx.h>
-
 #include "soc_common.h"
 
+static struct gpio palmtx_pcmcia_gpios[] = {
+	{ GPIO_NR_PALMTX_PCMCIA_POWER1,	GPIOF_INIT_LOW,	"PCMCIA Power 1" },
+	{ GPIO_NR_PALMTX_PCMCIA_POWER2,	GPIOF_INIT_LOW,	"PCMCIA Power 2" },
+	{ GPIO_NR_PALMTX_PCMCIA_RESET,	GPIOF_INIT_HIGH,"PCMCIA Reset" },
+	{ GPIO_NR_PALMTX_PCMCIA_READY,	GPIOF_IN,	"PCMCIA Ready" },
+};
+
 static int palmtx_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
 {
 	int ret;
 
-	ret = gpio_request(GPIO_NR_PALMTX_PCMCIA_POWER1, "PCMCIA PWR1");
-	if (ret)
-		goto err1;
-	ret = gpio_direction_output(GPIO_NR_PALMTX_PCMCIA_POWER1, 0);
-	if (ret)
-		goto err2;
-
-	ret = gpio_request(GPIO_NR_PALMTX_PCMCIA_POWER2, "PCMCIA PWR2");
-	if (ret)
-		goto err2;
-	ret = gpio_direction_output(GPIO_NR_PALMTX_PCMCIA_POWER2, 0);
-	if (ret)
-		goto err3;
-
-	ret = gpio_request(GPIO_NR_PALMTX_PCMCIA_RESET, "PCMCIA RST");
-	if (ret)
-		goto err3;
-	ret = gpio_direction_output(GPIO_NR_PALMTX_PCMCIA_RESET, 1);
-	if (ret)
-		goto err4;
-
-	ret = gpio_request(GPIO_NR_PALMTX_PCMCIA_READY, "PCMCIA RDY");
-	if (ret)
-		goto err4;
-	ret = gpio_direction_input(GPIO_NR_PALMTX_PCMCIA_READY);
-	if (ret)
-		goto err5;
+	ret = gpio_request_array(palmtx_pcmcia_gpios,
+				ARRAY_SIZE(palmtx_pcmcia_gpios));
 
 	skt->socket.pci_irq = gpio_to_irq(GPIO_NR_PALMTX_PCMCIA_READY);
-	return 0;
 
-err5:
-	gpio_free(GPIO_NR_PALMTX_PCMCIA_READY);
-err4:
-	gpio_free(GPIO_NR_PALMTX_PCMCIA_RESET);
-err3:
-	gpio_free(GPIO_NR_PALMTX_PCMCIA_POWER2);
-err2:
-	gpio_free(GPIO_NR_PALMTX_PCMCIA_POWER1);
-err1:
 	return ret;
 }
 
 static void palmtx_pcmcia_hw_shutdown(struct soc_pcmcia_socket *skt)
 {
-	gpio_free(GPIO_NR_PALMTX_PCMCIA_READY);
-	gpio_free(GPIO_NR_PALMTX_PCMCIA_RESET);
-	gpio_free(GPIO_NR_PALMTX_PCMCIA_POWER2);
-	gpio_free(GPIO_NR_PALMTX_PCMCIA_POWER1);
+	gpio_free_array(palmtx_pcmcia_gpios, ARRAY_SIZE(palmtx_pcmcia_gpios));
 }
 
 static void palmtx_pcmcia_socket_state(struct soc_pcmcia_socket *skt,
-- 
cgit v0.10.2


From e27af7edda008d225ad542c3b6645483683a7e91 Mon Sep 17 00:00:00 2001
From: Marek Vasut <marek.vasut@gmail.com>
Date: Sat, 15 Jan 2011 19:11:16 +0100
Subject: ARM: pxa: Use gpio arrays in vpac270_pcmcia driver

Use gpio_request_array() / gpio_free_array(), this makes the code
cleaner and less error prone.

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>

diff --git a/drivers/pcmcia/pxa2xx_vpac270.c b/drivers/pcmcia/pxa2xx_vpac270.c
index 55627ec..c13f411 100644
--- a/drivers/pcmcia/pxa2xx_vpac270.c
+++ b/drivers/pcmcia/pxa2xx_vpac270.c
@@ -22,6 +22,19 @@
 
 #include "soc_common.h"
 
+static struct gpio vpac270_pcmcia_gpios[] = {
+	{ GPIO84_VPAC270_PCMCIA_CD,	GPIOF_IN,	"PCMCIA Card Detect" },
+	{ GPIO35_VPAC270_PCMCIA_RDY,	GPIOF_IN,	"PCMCIA Ready" },
+	{ GPIO107_VPAC270_PCMCIA_PPEN,	GPIOF_INIT_LOW,	"PCMCIA PPEN" },
+	{ GPIO11_VPAC270_PCMCIA_RESET,	GPIOF_INIT_LOW,	"PCMCIA Reset" },
+};
+
+static struct gpio vpac270_cf_gpios[] = {
+	{ GPIO17_VPAC270_CF_CD,		GPIOF_IN,	"CF Card Detect" },
+	{ GPIO12_VPAC270_CF_RDY,	GPIOF_IN,	"CF Ready" },
+	{ GPIO16_VPAC270_CF_RESET,	GPIOF_INIT_LOW,	"CF Reset" },
+};
+
 static struct pcmcia_irqs cd_irqs[] = {
 	{
 		.sock = 0,
@@ -40,96 +53,34 @@ static int vpac270_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
 	int ret;
 
 	if (skt->nr == 0) {
-		ret = gpio_request(GPIO84_VPAC270_PCMCIA_CD, "PCMCIA CD");
-		if (ret)
-			goto err1;
-		ret = gpio_direction_input(GPIO84_VPAC270_PCMCIA_CD);
-		if (ret)
-			goto err2;
-
-		ret = gpio_request(GPIO35_VPAC270_PCMCIA_RDY, "PCMCIA RDY");
-		if (ret)
-			goto err2;
-		ret = gpio_direction_input(GPIO35_VPAC270_PCMCIA_RDY);
-		if (ret)
-			goto err3;
-
-		ret = gpio_request(GPIO107_VPAC270_PCMCIA_PPEN, "PCMCIA PPEN");
-		if (ret)
-			goto err3;
-		ret = gpio_direction_output(GPIO107_VPAC270_PCMCIA_PPEN, 0);
-		if (ret)
-			goto err4;
-
-		ret = gpio_request(GPIO11_VPAC270_PCMCIA_RESET, "PCMCIA RESET");
-		if (ret)
-			goto err4;
-		ret = gpio_direction_output(GPIO11_VPAC270_PCMCIA_RESET, 0);
-		if (ret)
-			goto err5;
+		ret = gpio_request_array(vpac270_pcmcia_gpios,
+				ARRAY_SIZE(vpac270_pcmcia_gpios));
 
 		skt->socket.pci_irq = gpio_to_irq(GPIO35_VPAC270_PCMCIA_RDY);
 
-		return soc_pcmcia_request_irqs(skt, &cd_irqs[0], 1);
-
-err5:
-		gpio_free(GPIO11_VPAC270_PCMCIA_RESET);
-err4:
-		gpio_free(GPIO107_VPAC270_PCMCIA_PPEN);
-err3:
-		gpio_free(GPIO35_VPAC270_PCMCIA_RDY);
-err2:
-		gpio_free(GPIO84_VPAC270_PCMCIA_CD);
-err1:
-		return ret;
-
+		if (!ret)
+			ret = soc_pcmcia_request_irqs(skt, &cd_irqs[0], 1);
 	} else {
-		ret = gpio_request(GPIO17_VPAC270_CF_CD, "CF CD");
-		if (ret)
-			goto err6;
-		ret = gpio_direction_input(GPIO17_VPAC270_CF_CD);
-		if (ret)
-			goto err7;
-
-		ret = gpio_request(GPIO12_VPAC270_CF_RDY, "CF RDY");
-		if (ret)
-			goto err7;
-		ret = gpio_direction_input(GPIO12_VPAC270_CF_RDY);
-		if (ret)
-			goto err8;
-
-		ret = gpio_request(GPIO16_VPAC270_CF_RESET, "CF RESET");
-		if (ret)
-			goto err8;
-		ret = gpio_direction_output(GPIO16_VPAC270_CF_RESET, 0);
-		if (ret)
-			goto err9;
+		ret = gpio_request_array(vpac270_cf_gpios,
+				ARRAY_SIZE(vpac270_cf_gpios));
 
 		skt->socket.pci_irq = gpio_to_irq(GPIO12_VPAC270_CF_RDY);
 
-		return soc_pcmcia_request_irqs(skt, &cd_irqs[1], 1);
-
-err9:
-		gpio_free(GPIO16_VPAC270_CF_RESET);
-err8:
-		gpio_free(GPIO12_VPAC270_CF_RDY);
-err7:
-		gpio_free(GPIO17_VPAC270_CF_CD);
-err6:
-		return ret;
-
+		if (!ret)
+			ret = soc_pcmcia_request_irqs(skt, &cd_irqs[1], 1);
 	}
+
+	return ret;
 }
 
 static void vpac270_pcmcia_hw_shutdown(struct soc_pcmcia_socket *skt)
 {
-	gpio_free(GPIO11_VPAC270_PCMCIA_RESET);
-	gpio_free(GPIO107_VPAC270_PCMCIA_PPEN);
-	gpio_free(GPIO35_VPAC270_PCMCIA_RDY);
-	gpio_free(GPIO84_VPAC270_PCMCIA_CD);
-	gpio_free(GPIO16_VPAC270_CF_RESET);
-	gpio_free(GPIO12_VPAC270_CF_RDY);
-	gpio_free(GPIO17_VPAC270_CF_CD);
+	if (skt->nr == 0)
+		gpio_request_array(vpac270_pcmcia_gpios,
+					ARRAY_SIZE(vpac270_pcmcia_gpios));
+	else
+		gpio_request_array(vpac270_cf_gpios,
+					ARRAY_SIZE(vpac270_cf_gpios));
 }
 
 static void vpac270_pcmcia_socket_state(struct soc_pcmcia_socket *skt,
-- 
cgit v0.10.2


From 6b1e3fca6ffb981db05688b1660a5d03d242edd4 Mon Sep 17 00:00:00 2001
From: Marek Vasut <marek.vasut@gmail.com>
Date: Sat, 15 Jan 2011 19:19:05 +0100
Subject: ARM: pxa: Use gpio arrays in palmld_hdd driver

Use gpio_request_array() / gpio_free_array(), this makes the code
cleaner and less error prone.

This patch also properly frees GPIOs in case ata_host_activate() call fails.

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>

diff --git a/drivers/ata/pata_palmld.c b/drivers/ata/pata_palmld.c
index 11fb4cc..fecf527 100644
--- a/drivers/ata/pata_palmld.c
+++ b/drivers/ata/pata_palmld.c
@@ -33,6 +33,11 @@
 
 #define DRV_NAME "pata_palmld"
 
+static struct gpio palmld_hdd_gpios[] = {
+	{ GPIO_NR_PALMLD_IDE_PWEN,	GPIOF_INIT_HIGH,	"HDD Power" },
+	{ GPIO_NR_PALMLD_IDE_RESET,	GPIOF_INIT_LOW,		"HDD Reset" },
+};
+
 static struct scsi_host_template palmld_sht = {
 	ATA_PIO_SHT(DRV_NAME),
 };
@@ -52,28 +57,23 @@ static __devinit int palmld_pata_probe(struct platform_device *pdev)
 
 	/* allocate host */
 	host = ata_host_alloc(&pdev->dev, 1);
-	if (!host)
-		return -ENOMEM;
+	if (!host) {
+		ret = -ENOMEM;
+		goto err1;
+	}
 
 	/* remap drive's physical memory address */
 	mem = devm_ioremap(&pdev->dev, PALMLD_IDE_PHYS, 0x1000);
-	if (!mem)
-		return -ENOMEM;
+	if (!mem) {
+		ret = -ENOMEM;
+		goto err1;
+	}
 
 	/* request and activate power GPIO, IRQ GPIO */
-	ret = gpio_request(GPIO_NR_PALMLD_IDE_PWEN, "HDD PWR");
+	ret = gpio_request_array(palmld_hdd_gpios,
+				ARRAY_SIZE(palmld_hdd_gpios));
 	if (ret)
 		goto err1;
-	ret = gpio_direction_output(GPIO_NR_PALMLD_IDE_PWEN, 1);
-	if (ret)
-		goto err2;
-
-	ret = gpio_request(GPIO_NR_PALMLD_IDE_RESET, "HDD RST");
-	if (ret)
-		goto err2;
-	ret = gpio_direction_output(GPIO_NR_PALMLD_IDE_RESET, 0);
-	if (ret)
-		goto err3;
 
 	/* reset the drive */
 	gpio_set_value(GPIO_NR_PALMLD_IDE_RESET, 0);
@@ -96,13 +96,15 @@ static __devinit int palmld_pata_probe(struct platform_device *pdev)
 	ata_sff_std_ports(&ap->ioaddr);
 
 	/* activate host */
-	return ata_host_activate(host, 0, NULL, IRQF_TRIGGER_RISING,
+	ret = ata_host_activate(host, 0, NULL, IRQF_TRIGGER_RISING,
 					&palmld_sht);
+	if (ret)
+		goto err2;
+
+	return ret;
 
-err3:
-	gpio_free(GPIO_NR_PALMLD_IDE_RESET);
 err2:
-	gpio_free(GPIO_NR_PALMLD_IDE_PWEN);
+	gpio_free_array(palmld_hdd_gpios, ARRAY_SIZE(palmld_hdd_gpios));
 err1:
 	return ret;
 }
@@ -116,8 +118,7 @@ static __devexit int palmld_pata_remove(struct platform_device *dev)
 	/* power down the HDD */
 	gpio_set_value(GPIO_NR_PALMLD_IDE_PWEN, 0);
 
-	gpio_free(GPIO_NR_PALMLD_IDE_RESET);
-	gpio_free(GPIO_NR_PALMLD_IDE_PWEN);
+	gpio_free_array(palmld_hdd_gpios, ARRAY_SIZE(palmld_hdd_gpios));
 
 	return 0;
 }
-- 
cgit v0.10.2


From 9ed3fbf1cbc2b747b3532985059f4738c15f4c07 Mon Sep 17 00:00:00 2001
From: Marek Vasut <marek.vasut@gmail.com>
Date: Sat, 15 Jan 2011 19:22:19 +0100
Subject: ARM: pxa: Update copyright notices for Palm devices

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>

diff --git a/arch/arm/mach-pxa/palm27x.c b/arch/arm/mach-pxa/palm27x.c
index 35572c4..4c9a938 100644
--- a/arch/arm/mach-pxa/palm27x.c
+++ b/arch/arm/mach-pxa/palm27x.c
@@ -1,8 +1,7 @@
 /*
  * Common code for Palm LD, T5, TX, Z72
  *
- * Copyright (C) 2010
- * Marek Vasut <marek.vasut@gmail.com>
+ * Copyright (C) 2010-2011 Marek Vasut <marek.vasut@gmail.com>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
diff --git a/drivers/pcmcia/pxa2xx_palmld.c b/drivers/pcmcia/pxa2xx_palmld.c
index 59f8405..69f7367 100644
--- a/drivers/pcmcia/pxa2xx_palmld.c
+++ b/drivers/pcmcia/pxa2xx_palmld.c
@@ -4,7 +4,7 @@
  * Driver for Palm LifeDrive PCMCIA
  *
  * Copyright (C) 2006 Alex Osborne <ato@meshy.org>
- * Copyright (C) 2007-2008 Marek Vasut <marek.vasut@gmail.com>
+ * Copyright (C) 2007-2011 Marek Vasut <marek.vasut@gmail.com>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
diff --git a/drivers/pcmcia/pxa2xx_palmtc.c b/drivers/pcmcia/pxa2xx_palmtc.c
index e655af9..d0ad6a7 100644
--- a/drivers/pcmcia/pxa2xx_palmtc.c
+++ b/drivers/pcmcia/pxa2xx_palmtc.c
@@ -4,7 +4,7 @@
  * Driver for Palm Tungsten|C PCMCIA
  *
  * Copyright (C) 2008 Alex Osborne <ato@meshy.org>
- * Copyright (C) 2009 Marek Vasut <marek.vasut@gmail.com>
+ * Copyright (C) 2009-2011 Marek Vasut <marek.vasut@gmail.com>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
diff --git a/drivers/pcmcia/pxa2xx_palmtx.c b/drivers/pcmcia/pxa2xx_palmtx.c
index 06f7f14..1a25804 100644
--- a/drivers/pcmcia/pxa2xx_palmtx.c
+++ b/drivers/pcmcia/pxa2xx_palmtx.c
@@ -3,7 +3,7 @@
  *
  * Driver for Palm T|X PCMCIA
  *
- * Copyright (C) 2007-2008 Marek Vasut <marek.vasut@gmail.com>
+ * Copyright (C) 2007-2011 Marek Vasut <marek.vasut@gmail.com>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
diff --git a/drivers/pcmcia/pxa2xx_vpac270.c b/drivers/pcmcia/pxa2xx_vpac270.c
index c13f411..435002d 100644
--- a/drivers/pcmcia/pxa2xx_vpac270.c
+++ b/drivers/pcmcia/pxa2xx_vpac270.c
@@ -3,8 +3,7 @@
  *
  * Driver for Voipac PXA270 PCMCIA and CF sockets
  *
- * Copyright (C) 2010
- * Marek Vasut <marek.vasut@gmail.com>
+ * Copyright (C) 2010-2011 Marek Vasut <marek.vasut@gmail.com>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
-- 
cgit v0.10.2


From 54a93b69a4341a14acb67e0bb19b9bf1cc878cb2 Mon Sep 17 00:00:00 2001
From: Marek Vasut <marek.vasut@gmail.com>
Date: Thu, 13 Jan 2011 11:45:30 +0100
Subject: ARM: pxa: PalmZ72: Add OV9640 camera support

Rework of patch from 2009:
PalmZ72: Add support for OV9640 camera sensor

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>

diff --git a/arch/arm/mach-pxa/include/mach/palmz72.h b/arch/arm/mach-pxa/include/mach/palmz72.h
index 2bbcf70..0d4700a 100644
--- a/arch/arm/mach-pxa/include/mach/palmz72.h
+++ b/arch/arm/mach-pxa/include/mach/palmz72.h
@@ -44,6 +44,11 @@
 #define GPIO_NR_PALMZ72_BT_POWER		17
 #define GPIO_NR_PALMZ72_BT_RESET		83
 
+/* Camera */
+#define GPIO_NR_PALMZ72_CAM_PWDN		56
+#define GPIO_NR_PALMZ72_CAM_RESET		57
+#define GPIO_NR_PALMZ72_CAM_POWER		91
+
 /** Initial values **/
 
 /* Battery */
diff --git a/arch/arm/mach-pxa/palmz72.c b/arch/arm/mach-pxa/palmz72.c
index 7bf4017..27a8e6d 100644
--- a/arch/arm/mach-pxa/palmz72.c
+++ b/arch/arm/mach-pxa/palmz72.c
@@ -30,6 +30,7 @@
 #include <linux/wm97xx.h>
 #include <linux/power_supply.h>
 #include <linux/usb/gpio_vbus.h>
+#include <linux/i2c-gpio.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -47,6 +48,9 @@
 #include <mach/palm27x.h>
 
 #include <mach/pm.h>
+#include <mach/camera.h>
+
+#include <media/soc_camera.h>
 
 #include "generic.h"
 #include "devices.h"
@@ -103,6 +107,28 @@ static unsigned long palmz72_pin_config[] __initdata = {
 	GPIO22_GPIO,	/* LCD border color */
 	GPIO96_GPIO,	/* lcd power */
 
+	/* PXA Camera */
+	GPIO81_CIF_DD_0,
+	GPIO48_CIF_DD_5,
+	GPIO50_CIF_DD_3,
+	GPIO51_CIF_DD_2,
+	GPIO52_CIF_DD_4,
+	GPIO53_CIF_MCLK,
+	GPIO54_CIF_PCLK,
+	GPIO55_CIF_DD_1,
+	GPIO84_CIF_FV,
+	GPIO85_CIF_LV,
+	GPIO93_CIF_DD_6,
+	GPIO108_CIF_DD_7,
+
+	GPIO56_GPIO,	/* OV9640 Powerdown */
+	GPIO57_GPIO,	/* OV9640 Reset */
+	GPIO91_GPIO,	/* OV9640 Power */
+
+	/* I2C */
+	GPIO117_GPIO,	/* I2C_SCL */
+	GPIO118_GPIO,	/* I2C_SDA */
+
 	/* Misc. */
 	GPIO0_GPIO	| WAKEUP_ON_LEVEL_HIGH,	/* power detect */
 	GPIO88_GPIO,				/* green led */
@@ -254,6 +280,106 @@ device_initcall(palmz72_pm_init);
 #endif
 
 /******************************************************************************
+ * SoC Camera
+ ******************************************************************************/
+#if defined(CONFIG_SOC_CAMERA_OV9640) || \
+	defined(CONFIG_SOC_CAMERA_OV9640_MODULE)
+static struct pxacamera_platform_data palmz72_pxacamera_platform_data = {
+	.flags		= PXA_CAMERA_MASTER | PXA_CAMERA_DATAWIDTH_8 |
+			PXA_CAMERA_PCLK_EN | PXA_CAMERA_MCLK_EN,
+	.mclk_10khz	= 2600,
+};
+
+/* Board I2C devices. */
+static struct i2c_board_info palmz72_i2c_device[] = {
+	{
+		I2C_BOARD_INFO("ov9640", 0x30),
+	}
+};
+
+static int palmz72_camera_power(struct device *dev, int power)
+{
+	gpio_set_value(GPIO_NR_PALMZ72_CAM_PWDN, !power);
+	mdelay(50);
+	return 0;
+}
+
+static int palmz72_camera_reset(struct device *dev)
+{
+	gpio_set_value(GPIO_NR_PALMZ72_CAM_RESET, 1);
+	mdelay(50);
+	gpio_set_value(GPIO_NR_PALMZ72_CAM_RESET, 0);
+	mdelay(50);
+	return 0;
+}
+
+static struct soc_camera_link palmz72_iclink = {
+	.bus_id		= 0, /* Match id in pxa27x_device_camera in device.c */
+	.board_info	= &palmz72_i2c_device[0],
+	.i2c_adapter_id	= 0,
+	.module_name	= "ov96xx",
+	.power		= &palmz72_camera_power,
+	.reset		= &palmz72_camera_reset,
+	.flags		= SOCAM_DATAWIDTH_8,
+};
+
+static struct i2c_gpio_platform_data palmz72_i2c_bus_data = {
+	.sda_pin	= 118,
+	.scl_pin	= 117,
+	.udelay		= 10,
+	.timeout	= 100,
+};
+
+static struct platform_device palmz72_i2c_bus_device = {
+	.name		= "i2c-gpio",
+	.id		= 0, /* we use this as a replacement for i2c-pxa */
+	.dev		= {
+		.platform_data	= &palmz72_i2c_bus_data,
+	}
+};
+
+static struct platform_device palmz72_camera = {
+	.name	= "soc-camera-pdrv",
+	.id	= -1,
+	.dev	= {
+		.platform_data	= &palmz72_iclink,
+	},
+};
+
+/* Here we request the camera GPIOs and configure them. We power up the camera
+ * module, deassert the reset pin, but put it into powerdown (low to no power
+ * consumption) mode. This allows us to later bring the module up fast. */
+static struct gpio palmz72_camera_gpios[] = {
+	{ GPIO_NR_PALMZ72_CAM_POWER,	GPIOF_INIT_HIGH,"Camera DVDD" },
+	{ GPIO_NR_PALMZ72_CAM_RESET,	GPIOF_INIT_LOW,	"Camera RESET" },
+	{ GPIO_NR_PALMZ72_CAM_PWDN,	GPIOF_INIT_LOW,	"Camera PWDN" },
+};
+
+static inline void __init palmz72_cam_gpio_init(void)
+{
+	int ret;
+
+	ret = gpio_request_array(ARRAY_AND_SIZE(palmz72_camera_gpios));
+	if (!ret)
+		gpio_free_array(ARRAY_AND_SIZE(palmz72_camera_gpios));
+	else
+		printk(KERN_ERR "Camera GPIO init failed!\n");
+
+	return;
+}
+
+static void __init palmz72_camera_init(void)
+{
+	palmz72_cam_gpio_init();
+	pxa_set_camera_info(&palmz72_pxacamera_platform_data);
+	platform_device_register(&palmz72_i2c_bus_device);
+	platform_device_register(&palmz72_camera);
+}
+#else
+static inline void palmz72_camera_init(void) {}
+#endif
+
+/******************************************************************************
  * Machine init
  ******************************************************************************/
 static void __init palmz72_init(void)
@@ -276,6 +402,7 @@ static void __init palmz72_init(void)
 	palm27x_pmic_init();
 	palmz72_kpc_init();
 	palmz72_leds_init();
+	palmz72_camera_init();
 }
 
 MACHINE_START(PALMZ72, "Palm Zire72")
-- 
cgit v0.10.2


From 4321e1a12b811c02441240aa6183156791204f3f Mon Sep 17 00:00:00 2001
From: Russell King - ARM Linux <linux@arm.linux.org.uk>
Date: Tue, 15 Feb 2011 15:37:30 +0800
Subject: ARM: pxa: clean up set_pxa_fb_info

set_pxa_fb_info() has been a long-standing wart in the naming scheme
of the pxa_set_xxx_info() functions.  This renames the function, and
combines set_pxa_fb_parent() with set_pxa_fb_info().

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Acked-by: Igor Grinberg <grinberg@compulab.co.il>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>

diff --git a/arch/arm/mach-pxa/am200epd.c b/arch/arm/mach-pxa/am200epd.c
index 3499fad..10964e3 100644
--- a/arch/arm/mach-pxa/am200epd.c
+++ b/arch/arm/mach-pxa/am200epd.c
@@ -194,7 +194,7 @@ static struct notifier_block am200_fb_notif = {
 };
 
 /* this gets called as part of our init. these steps must be done now so
- * that we can use set_pxa_fb_info */
+ * that we can use pxa_set_fb_info */
 static void __init am200_presetup_fb(void)
 {
 	int fw;
@@ -249,7 +249,7 @@ static void __init am200_presetup_fb(void)
 	/* we divide since we told the LCD controller we're 16bpp */
 	am200_fb_info.modes->xres /= 2;
 
-	set_pxa_fb_info(&am200_fb_info);
+	pxa_set_fb_info(NULL, &am200_fb_info);
 
 }
 
diff --git a/arch/arm/mach-pxa/balloon3.c b/arch/arm/mach-pxa/balloon3.c
index a134a14..1539577 100644
--- a/arch/arm/mach-pxa/balloon3.c
+++ b/arch/arm/mach-pxa/balloon3.c
@@ -264,7 +264,7 @@ static void __init balloon3_lcd_init(void)
 	}
 
 	balloon3_lcd_screen.pxafb_backlight_power = balloon3_backlight_power;
-	set_pxa_fb_info(&balloon3_lcd_screen);
+	pxa_set_fb_info(NULL, &balloon3_lcd_screen);
 	return;
 
 err2:
diff --git a/arch/arm/mach-pxa/cm-x2xx.c b/arch/arm/mach-pxa/cm-x2xx.c
index b734d84..8225e2e 100644
--- a/arch/arm/mach-pxa/cm-x2xx.c
+++ b/arch/arm/mach-pxa/cm-x2xx.c
@@ -379,7 +379,7 @@ __setup("monitor=", cmx2xx_set_display);
 
 static void __init cmx2xx_init_display(void)
 {
-	set_pxa_fb_info(cmx2xx_display);
+	pxa_set_fb_info(NULL, cmx2xx_display);
 }
 #else
 static inline void cmx2xx_init_display(void) {}
diff --git a/arch/arm/mach-pxa/cm-x300.c b/arch/arm/mach-pxa/cm-x300.c
index 7984268..0c9cfbc 100644
--- a/arch/arm/mach-pxa/cm-x300.c
+++ b/arch/arm/mach-pxa/cm-x300.c
@@ -296,7 +296,7 @@ static struct pxafb_mach_info cm_x300_lcd = {
 
 static void __init cm_x300_init_lcd(void)
 {
-	set_pxa_fb_info(&cm_x300_lcd);
+	pxa_set_fb_info(NULL, &cm_x300_lcd);
 }
 #else
 static inline void cm_x300_init_lcd(void) {}
diff --git a/arch/arm/mach-pxa/colibri-pxa270-income.c b/arch/arm/mach-pxa/colibri-pxa270-income.c
index 07b62a0..c2f164b 100644
--- a/arch/arm/mach-pxa/colibri-pxa270-income.c
+++ b/arch/arm/mach-pxa/colibri-pxa270-income.c
@@ -176,7 +176,7 @@ static struct pxafb_mach_info income_lcd_screen = {
 
 static void __init income_lcd_init(void)
 {
-	set_pxa_fb_info(&income_lcd_screen);
+	pxa_set_fb_info(NULL, &income_lcd_screen);
 }
 #else
 static inline void income_lcd_init(void) {}
diff --git a/arch/arm/mach-pxa/colibri-pxa3xx.c b/arch/arm/mach-pxa/colibri-pxa3xx.c
index 96b2d9f..3f9be41 100644
--- a/arch/arm/mach-pxa/colibri-pxa3xx.c
+++ b/arch/arm/mach-pxa/colibri-pxa3xx.c
@@ -105,7 +105,7 @@ void __init colibri_pxa3xx_init_lcd(int bl_pin)
 	lcd_bl_pin = bl_pin;
 	gpio_request(bl_pin, "lcd backlight");
 	gpio_direction_output(bl_pin, 0);
-	set_pxa_fb_info(&sharp_lq43_info);
+	pxa_set_fb_info(NULL, &sharp_lq43_info);
 }
 #endif
 
diff --git a/arch/arm/mach-pxa/devices.c b/arch/arm/mach-pxa/devices.c
index 4c766e3..edfe803 100644
--- a/arch/arm/mach-pxa/devices.c
+++ b/arch/arm/mach-pxa/devices.c
@@ -188,16 +188,12 @@ struct platform_device pxa_device_fb = {
 	.resource	= pxafb_resources,
 };
 
-void __init set_pxa_fb_info(struct pxafb_mach_info *info)
+void __init pxa_set_fb_info(struct device *parent, struct pxafb_mach_info *info)
 {
+	pxa_device_fb.dev.parent = parent;
 	pxa_register_device(&pxa_device_fb, info);
 }
 
-void __init set_pxa_fb_parent(struct device *parent_dev)
-{
-	pxa_device_fb.dev.parent = parent_dev;
-}
-
 static struct resource pxa_resource_ffuart[] = {
 	{
 		.start	= 0x40100000,
diff --git a/arch/arm/mach-pxa/em-x270.c b/arch/arm/mach-pxa/em-x270.c
index a78bb30..2da03a4 100644
--- a/arch/arm/mach-pxa/em-x270.c
+++ b/arch/arm/mach-pxa/em-x270.c
@@ -689,7 +689,7 @@ static struct pxafb_mach_info em_x270_lcd = {
 
 static void __init em_x270_init_lcd(void)
 {
-	set_pxa_fb_info(&em_x270_lcd);
+	pxa_set_fb_info(NULL, &em_x270_lcd);
 }
 #else
 static inline void em_x270_init_lcd(void) {}
diff --git a/arch/arm/mach-pxa/eseries.c b/arch/arm/mach-pxa/eseries.c
index edca0a0..8fdf5a3 100644
--- a/arch/arm/mach-pxa/eseries.c
+++ b/arch/arm/mach-pxa/eseries.c
@@ -344,7 +344,7 @@ static void __init e400_init(void)
 	/* Fixme - e400 may have a switched clock */
 	eseries_register_clks();
 	eseries_get_tmio_gpios();
-	set_pxa_fb_info(&e400_pxafb_mach_info);
+	pxa_set_fb_info(NULL, &e400_pxafb_mach_info);
 	platform_add_devices(ARRAY_AND_SIZE(e400_devices));
 	pxa_set_udc_info(&e7xx_udc_mach_info);
 }
diff --git a/arch/arm/mach-pxa/ezx.c b/arch/arm/mach-pxa/ezx.c
index 87cec0a..fcd366a 100644
--- a/arch/arm/mach-pxa/ezx.c
+++ b/arch/arm/mach-pxa/ezx.c
@@ -783,7 +783,7 @@ static void __init a780_init(void)
 
 	pxa_set_i2c_info(NULL);
 
-	set_pxa_fb_info(&ezx_fb_info_1);
+	pxa_set_fb_info(NULL, &ezx_fb_info_1);
 
 	pxa_set_keypad_info(&a780_keypad_platform_data);
 
@@ -853,7 +853,7 @@ static void __init e680_init(void)
 	pxa_set_i2c_info(NULL);
 	i2c_register_board_info(0, ARRAY_AND_SIZE(e680_i2c_board_info));
 
-	set_pxa_fb_info(&ezx_fb_info_1);
+	pxa_set_fb_info(NULL, &ezx_fb_info_1);
 
 	pxa_set_keypad_info(&e680_keypad_platform_data);
 
@@ -918,7 +918,7 @@ static void __init a1200_init(void)
 	pxa_set_i2c_info(NULL);
 	i2c_register_board_info(0, ARRAY_AND_SIZE(a1200_i2c_board_info));
 
-	set_pxa_fb_info(&ezx_fb_info_2);
+	pxa_set_fb_info(NULL, &ezx_fb_info_2);
 
 	pxa_set_keypad_info(&a1200_keypad_platform_data);
 
@@ -1103,7 +1103,7 @@ static void __init a910_init(void)
 	pxa_set_i2c_info(NULL);
 	i2c_register_board_info(0, ARRAY_AND_SIZE(a910_i2c_board_info));
 
-	set_pxa_fb_info(&ezx_fb_info_2);
+	pxa_set_fb_info(NULL, &ezx_fb_info_2);
 
 	pxa_set_keypad_info(&a910_keypad_platform_data);
 
@@ -1173,7 +1173,7 @@ static void __init e6_init(void)
 	pxa_set_i2c_info(NULL);
 	i2c_register_board_info(0, ARRAY_AND_SIZE(e6_i2c_board_info));
 
-	set_pxa_fb_info(&ezx_fb_info_2);
+	pxa_set_fb_info(NULL, &ezx_fb_info_2);
 
 	pxa_set_keypad_info(&e6_keypad_platform_data);
 
@@ -1212,7 +1212,7 @@ static void __init e2_init(void)
 	pxa_set_i2c_info(NULL);
 	i2c_register_board_info(0, ARRAY_AND_SIZE(e2_i2c_board_info));
 
-	set_pxa_fb_info(&ezx_fb_info_2);
+	pxa_set_fb_info(NULL, &ezx_fb_info_2);
 
 	pxa_set_keypad_info(&e2_keypad_platform_data);
 
diff --git a/arch/arm/mach-pxa/idp.c b/arch/arm/mach-pxa/idp.c
index dd40e4a..f7fb64f 100644
--- a/arch/arm/mach-pxa/idp.c
+++ b/arch/arm/mach-pxa/idp.c
@@ -167,7 +167,7 @@ static void __init idp_init(void)
 
 	platform_device_register(&smc91x_device);
 	//platform_device_register(&mst_audio_device);
-	set_pxa_fb_info(&sharp_lm8v31);
+	pxa_set_fb_info(NULL, &sharp_lm8v31);
 	pxa_set_mci_info(&idp_mci_platform_data);
 }
 
diff --git a/arch/arm/mach-pxa/include/mach/pxafb.h b/arch/arm/mach-pxa/include/mach/pxafb.h
index 160ec83..01a45ac4 100644
--- a/arch/arm/mach-pxa/include/mach/pxafb.h
+++ b/arch/arm/mach-pxa/include/mach/pxafb.h
@@ -154,8 +154,8 @@ struct pxafb_mach_info {
 	void (*pxafb_lcd_power)(int, struct fb_var_screeninfo *);
 	void (*smart_update)(struct fb_info *);
 };
-void set_pxa_fb_info(struct pxafb_mach_info *hard_pxa_fb_info);
-void set_pxa_fb_parent(struct device *parent_dev);
+
+void pxa_set_fb_info(struct device *, struct pxafb_mach_info *);
 unsigned long pxafb_get_hsync_time(struct device *dev);
 
 extern int pxafb_smart_queue(struct fb_info *info, uint16_t *cmds, int);
diff --git a/arch/arm/mach-pxa/littleton.c b/arch/arm/mach-pxa/littleton.c
index ccb7bfa..4b2c45f 100644
--- a/arch/arm/mach-pxa/littleton.c
+++ b/arch/arm/mach-pxa/littleton.c
@@ -185,7 +185,7 @@ static struct pxafb_mach_info littleton_lcd_info = {
 
 static void littleton_init_lcd(void)
 {
-	set_pxa_fb_info(&littleton_lcd_info);
+	pxa_set_fb_info(NULL, &littleton_lcd_info);
 }
 #else
 static inline void littleton_init_lcd(void) {};
diff --git a/arch/arm/mach-pxa/lpd270.c b/arch/arm/mach-pxa/lpd270.c
index c9a3e77..8aebc58 100644
--- a/arch/arm/mach-pxa/lpd270.c
+++ b/arch/arm/mach-pxa/lpd270.c
@@ -480,7 +480,7 @@ static void __init lpd270_init(void)
 	pxa_set_ac97_info(NULL);
 
 	if (lpd270_lcd_to_use != NULL)
-		set_pxa_fb_info(lpd270_lcd_to_use);
+		pxa_set_fb_info(NULL, lpd270_lcd_to_use);
 
 	pxa_set_ohci_info(&lpd270_ohci_platform_data);
 }
diff --git a/arch/arm/mach-pxa/lubbock.c b/arch/arm/mach-pxa/lubbock.c
index dca20de..12a2a56 100644
--- a/arch/arm/mach-pxa/lubbock.c
+++ b/arch/arm/mach-pxa/lubbock.c
@@ -521,7 +521,7 @@ static void __init lubbock_init(void)
 
 	clk_add_alias("SA1111_CLK", NULL, "GPIO11_CLK", NULL);
 	pxa_set_udc_info(&udc_info);
-	set_pxa_fb_info(&sharp_lm8v31);
+	pxa_set_fb_info(NULL, &sharp_lm8v31);
 	pxa_set_mci_info(&lubbock_mci_platform_data);
 	pxa_set_ficp_info(&lubbock_ficp_platform_data);
 	pxa_set_ac97_info(NULL);
diff --git a/arch/arm/mach-pxa/magician.c b/arch/arm/mach-pxa/magician.c
index 41198f0..ad70264 100644
--- a/arch/arm/mach-pxa/magician.c
+++ b/arch/arm/mach-pxa/magician.c
@@ -757,7 +757,7 @@ static void __init magician_init(void)
 		gpio_direction_output(GPIO104_MAGICIAN_LCD_POWER_1, 0);
 		gpio_direction_output(GPIO105_MAGICIAN_LCD_POWER_2, 0);
 		gpio_direction_output(GPIO106_MAGICIAN_LCD_POWER_3, 0);
-		set_pxa_fb_info(lcd_select ? &samsung_info : &toppoly_info);
+		pxa_set_fb_info(NULL, lcd_select ? &samsung_info : &toppoly_info);
 	} else
 		pr_err("LCD detection: CPLD mapping failed\n");
 }
diff --git a/arch/arm/mach-pxa/mainstone.c b/arch/arm/mach-pxa/mainstone.c
index d4b6f23..a58f522 100644
--- a/arch/arm/mach-pxa/mainstone.c
+++ b/arch/arm/mach-pxa/mainstone.c
@@ -592,7 +592,7 @@ static void __init mainstone_init(void)
 	else
 		mainstone_pxafb_info.modes = &toshiba_ltm035a776c_mode;
 
-	set_pxa_fb_info(&mainstone_pxafb_info);
+	pxa_set_fb_info(NULL, &mainstone_pxafb_info);
 	mainstone_backlight_register();
 
 	pxa_set_mci_info(&mainstone_mci_platform_data);
diff --git a/arch/arm/mach-pxa/mioa701.c b/arch/arm/mach-pxa/mioa701.c
index faafea3..18e05b1 100644
--- a/arch/arm/mach-pxa/mioa701.c
+++ b/arch/arm/mach-pxa/mioa701.c
@@ -795,7 +795,7 @@ static void __init mioa701_machine_init(void)
 	pxa_set_stuart_info(NULL);
 	mio_gpio_request(ARRAY_AND_SIZE(global_gpios));
 	bootstrap_init();
-	set_pxa_fb_info(&mioa701_pxafb_info);
+	pxa_set_fb_info(NULL, &mioa701_pxafb_info);
 	pxa_set_mci_info(&mioa701_mci_info);
 	pxa_set_keypad_info(&mioa701_keypad_info);
 	pxa_set_udc_info(&mioa701_udc_info);
diff --git a/arch/arm/mach-pxa/palm27x.c b/arch/arm/mach-pxa/palm27x.c
index 4c9a938..5c93728 100644
--- a/arch/arm/mach-pxa/palm27x.c
+++ b/arch/arm/mach-pxa/palm27x.c
@@ -158,7 +158,7 @@ void __init palm27x_lcd_init(int power, struct pxafb_mode_info *mode)
 		palm27x_lcd_screen.pxafb_lcd_power = palm27x_lcd_ctl;
 	}
 
-	set_pxa_fb_info(&palm27x_lcd_screen);
+	pxa_set_fb_info(NULL, &palm27x_lcd_screen);
 }
 #endif
 
diff --git a/arch/arm/mach-pxa/palmtc.c b/arch/arm/mach-pxa/palmtc.c
index a09a237..fb06bd0 100644
--- a/arch/arm/mach-pxa/palmtc.c
+++ b/arch/arm/mach-pxa/palmtc.c
@@ -507,7 +507,7 @@ static struct pxafb_mach_info palmtc_lcd_screen = {
 
 static void __init palmtc_lcd_init(void)
 {
-	set_pxa_fb_info(&palmtc_lcd_screen);
+	pxa_set_fb_info(NULL, &palmtc_lcd_screen);
 }
 #else
 static inline void palmtc_lcd_init(void) {}
diff --git a/arch/arm/mach-pxa/palmte2.c b/arch/arm/mach-pxa/palmte2.c
index 66311c7..726f5b9 100644
--- a/arch/arm/mach-pxa/palmte2.c
+++ b/arch/arm/mach-pxa/palmte2.c
@@ -346,7 +346,7 @@ static void __init palmte2_init(void)
 	pxa_set_btuart_info(NULL);
 	pxa_set_stuart_info(NULL);
 
-	set_pxa_fb_info(&palmte2_lcd_screen);
+	pxa_set_fb_info(NULL, &palmte2_lcd_screen);
 	pxa_set_mci_info(&palmte2_mci_platform_data);
 	palmte2_udc_init();
 	pxa_set_ac97_info(&palmte2_ac97_pdata);
diff --git a/arch/arm/mach-pxa/pcm990-baseboard.c b/arch/arm/mach-pxa/pcm990-baseboard.c
index 90820fa..c1a6448 100644
--- a/arch/arm/mach-pxa/pcm990-baseboard.c
+++ b/arch/arm/mach-pxa/pcm990-baseboard.c
@@ -515,7 +515,7 @@ void __init pcm990_baseboard_init(void)
 	pcm990_init_irq();
 
 #ifndef CONFIG_PCM990_DISPLAY_NONE
-	set_pxa_fb_info(&pcm990_fbinfo);
+	pxa_set_fb_info(NULL, &pcm990_fbinfo);
 #endif
 	platform_device_register(&pcm990_backlight_device);
 
diff --git a/arch/arm/mach-pxa/poodle.c b/arch/arm/mach-pxa/poodle.c
index 4f0ff1a..be68ec5 100644
--- a/arch/arm/mach-pxa/poodle.c
+++ b/arch/arm/mach-pxa/poodle.c
@@ -445,8 +445,7 @@ static void __init poodle_init(void)
 	if (ret)
 		pr_warning("poodle: Unable to register LoCoMo device\n");
 
-	set_pxa_fb_parent(&poodle_locomo_device.dev);
-	set_pxa_fb_info(&poodle_fb_info);
+	pxa_set_fb_info(&poodle_locomo_device.dev, &poodle_fb_info);
 	pxa_set_udc_info(&udc_info);
 	pxa_set_mci_info(&poodle_mci_platform_data);
 	pxa_set_ficp_info(&poodle_ficp_platform_data);
diff --git a/arch/arm/mach-pxa/raumfeld.c b/arch/arm/mach-pxa/raumfeld.c
index 8361151..d9a5791 100644
--- a/arch/arm/mach-pxa/raumfeld.c
+++ b/arch/arm/mach-pxa/raumfeld.c
@@ -597,7 +597,7 @@ static void __init raumfeld_lcd_init(void)
 {
 	int ret;
 
-	set_pxa_fb_info(&raumfeld_sharp_lcd_info);
+	pxa_set_fb_info(NULL, &raumfeld_sharp_lcd_info);
 
 	/* Earlier devices had the backlight regulator controlled
 	 * via PWM, later versions use another controller for that */
diff --git a/arch/arm/mach-pxa/saar.c b/arch/arm/mach-pxa/saar.c
index c1ca8cb..dd0118f 100644
--- a/arch/arm/mach-pxa/saar.c
+++ b/arch/arm/mach-pxa/saar.c
@@ -473,7 +473,7 @@ static struct pxafb_mach_info saar_lcd_info = {
 
 static void __init saar_init_lcd(void)
 {
-	set_pxa_fb_info(&saar_lcd_info);
+	pxa_set_fb_info(NULL, &saar_lcd_info);
 }
 #else
 static inline void saar_init_lcd(void) {}
diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c
index b49a2c2..e646b6d 100644
--- a/arch/arm/mach-pxa/spitz.c
+++ b/arch/arm/mach-pxa/spitz.c
@@ -725,7 +725,7 @@ static struct pxafb_mach_info spitz_pxafb_info = {
 
 static void __init spitz_lcd_init(void)
 {
-	set_pxa_fb_info(&spitz_pxafb_info);
+	pxa_set_fb_info(NULL, &spitz_pxafb_info);
 }
 #else
 static inline void spitz_lcd_init(void) {}
diff --git a/arch/arm/mach-pxa/tavorevb.c b/arch/arm/mach-pxa/tavorevb.c
index 9cecf83..53d4a47 100644
--- a/arch/arm/mach-pxa/tavorevb.c
+++ b/arch/arm/mach-pxa/tavorevb.c
@@ -466,7 +466,7 @@ static void __init tavorevb_init_lcd(void)
 {
 	platform_device_register(&tavorevb_backlight_devices[0]);
 	platform_device_register(&tavorevb_backlight_devices[1]);
-	set_pxa_fb_info(&tavorevb_lcd_info);
+	pxa_set_fb_info(NULL, &tavorevb_lcd_info);
 }
 #else
 static inline void tavorevb_init_lcd(void) {}
diff --git a/arch/arm/mach-pxa/trizeps4.c b/arch/arm/mach-pxa/trizeps4.c
index 423261d..fa510fd 100644
--- a/arch/arm/mach-pxa/trizeps4.c
+++ b/arch/arm/mach-pxa/trizeps4.c
@@ -516,9 +516,9 @@ static void __init trizeps4_init(void)
 	pxa_set_stuart_info(NULL);
 
 	if (0)	/* dont know how to determine LCD */
-		set_pxa_fb_info(&sharp_lcd);
+		pxa_set_fb_info(NULL, &sharp_lcd);
 	else
-		set_pxa_fb_info(&toshiba_lcd);
+		pxa_set_fb_info(NULL, &toshiba_lcd);
 
 	pxa_set_mci_info(&trizeps4_mci_platform_data);
 #ifndef STATUS_LEDS_ON_STUART_PINS
diff --git a/arch/arm/mach-pxa/viper.c b/arch/arm/mach-pxa/viper.c
index 49eeeab..53b2495 100644
--- a/arch/arm/mach-pxa/viper.c
+++ b/arch/arm/mach-pxa/viper.c
@@ -932,7 +932,7 @@ static void __init viper_init(void)
 	/* Wake-up serial console */
 	viper_init_serial_gpio();
 
-	set_pxa_fb_info(&fb_info);
+	pxa_set_fb_info(NULL, &fb_info);
 
 	/* v1 hardware cannot use the datacs line */
 	version = viper_hw_version();
diff --git a/arch/arm/mach-pxa/vpac270.c b/arch/arm/mach-pxa/vpac270.c
index b9b5797..a46f8d1 100644
--- a/arch/arm/mach-pxa/vpac270.c
+++ b/arch/arm/mach-pxa/vpac270.c
@@ -573,7 +573,7 @@ static void __init vpac270_lcd_init(void)
 	}
 
 	vpac270_lcd_screen.pxafb_lcd_power = vpac270_lcd_power;
-	set_pxa_fb_info(&vpac270_lcd_screen);
+	pxa_set_fb_info(NULL, &vpac270_lcd_screen);
 	return;
 
 err2:
diff --git a/arch/arm/mach-pxa/z2.c b/arch/arm/mach-pxa/z2.c
index a323e07..084c724 100644
--- a/arch/arm/mach-pxa/z2.c
+++ b/arch/arm/mach-pxa/z2.c
@@ -272,7 +272,7 @@ static struct pxafb_mach_info z2_lcd_screen = {
 
 static void __init z2_lcd_init(void)
 {
-	set_pxa_fb_info(&z2_lcd_screen);
+	pxa_set_fb_info(NULL, &z2_lcd_screen);
 }
 #else
 static inline void z2_lcd_init(void) {}
diff --git a/arch/arm/mach-pxa/zeus.c b/arch/arm/mach-pxa/zeus.c
index f4b053b..3db0ba4 100644
--- a/arch/arm/mach-pxa/zeus.c
+++ b/arch/arm/mach-pxa/zeus.c
@@ -847,7 +847,7 @@ static void __init zeus_init(void)
 	if (zeus_setup_fb_gpios())
 		pr_err("Failed to setup fb gpios\n");
 	else
-		set_pxa_fb_info(&zeus_fb_info);
+		pxa_set_fb_info(NULL, &zeus_fb_info);
 
 	pxa_set_mci_info(&zeus_mci_platform_data);
 	pxa_set_udc_info(&zeus_udc_info);
diff --git a/arch/arm/mach-pxa/zylonite.c b/arch/arm/mach-pxa/zylonite.c
index a4c784a..5821185 100644
--- a/arch/arm/mach-pxa/zylonite.c
+++ b/arch/arm/mach-pxa/zylonite.c
@@ -208,7 +208,7 @@ static void __init zylonite_init_lcd(void)
 	platform_device_register(&zylonite_backlight_device);
 
 	if (lcd_id & 0x20) {
-		set_pxa_fb_info(&zylonite_sharp_lcd_info);
+		pxa_set_fb_info(NULL, &zylonite_sharp_lcd_info);
 		return;
 	}
 
@@ -220,7 +220,7 @@ static void __init zylonite_init_lcd(void)
 	else
 		zylonite_toshiba_lcd_info.modes = &toshiba_ltm04c380k_mode;
 
-	set_pxa_fb_info(&zylonite_toshiba_lcd_info);
+	pxa_set_fb_info(NULL, &zylonite_toshiba_lcd_info);
 }
 #else
 static inline void zylonite_init_lcd(void) {}
-- 
cgit v0.10.2


From ccc46e29a63c88aa9ac72aac86ff0cfd5c627a11 Mon Sep 17 00:00:00 2001
From: Haojian Zhuang <haojian.zhuang@marvell.com>
Date: Wed, 24 Nov 2010 11:54:23 +0800
Subject: ARM: pxa: auto compute shift and mult of timer

Use auto-computed shift and mult of timer with new API
clocksource_calc_mult_shift()/clockevents_calc_mult_shift().

Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
Cc: Nicolas Pitre <nico@fluxnic.net>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>

diff --git a/arch/arm/mach-pxa/time.c b/arch/arm/mach-pxa/time.c
index e7f64d9..428da3f 100644
--- a/arch/arm/mach-pxa/time.c
+++ b/arch/arm/mach-pxa/time.c
@@ -100,7 +100,6 @@ pxa_osmr0_set_mode(enum clock_event_mode mode, struct clock_event_device *dev)
 static struct clock_event_device ckevt_pxa_osmr0 = {
 	.name		= "osmr0",
 	.features	= CLOCK_EVT_FEAT_ONESHOT,
-	.shift		= 32,
 	.rating		= 200,
 	.set_next_event	= pxa_osmr0_set_next_event,
 	.set_mode	= pxa_osmr0_set_mode,
@@ -135,8 +134,8 @@ static void __init pxa_timer_init(void)
 
 	init_sched_clock(&cd, pxa_update_sched_clock, 32, clock_tick_rate);
 
-	ckevt_pxa_osmr0.mult =
-		div_sc(clock_tick_rate, NSEC_PER_SEC, ckevt_pxa_osmr0.shift);
+	clocksource_calc_mult_shift(&cksrc_pxa_oscr0, clock_tick_rate, 4);
+	clockevents_calc_mult_shift(&ckevt_pxa_osmr0, clock_tick_rate, 4);
 	ckevt_pxa_osmr0.max_delta_ns =
 		clockevent_delta2ns(0x7fffffff, &ckevt_pxa_osmr0);
 	ckevt_pxa_osmr0.min_delta_ns =
-- 
cgit v0.10.2


From 133dce0687b4c38184609fa921d060a54dff93e9 Mon Sep 17 00:00:00 2001
From: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Date: Mon, 14 Feb 2011 15:33:16 +0300
Subject: ARM: pxa/eseries: switch to using gpio-vbus transceiver

Switch from handling gpio-vbus in pxa25x_udc to using standard gpio-vbus
tranceiver.

Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Cc: Ian Molton <spyro@f2s.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>

diff --git a/arch/arm/mach-pxa/eseries.c b/arch/arm/mach-pxa/eseries.c
index 8fdf5a3..2e3970f 100644
--- a/arch/arm/mach-pxa/eseries.c
+++ b/arch/arm/mach-pxa/eseries.c
@@ -20,6 +20,7 @@
 #include <linux/mfd/t7l66xb.h>
 #include <linux/mtd/nand.h>
 #include <linux/mtd/partitions.h>
+#include <linux/usb/gpio_vbus.h>
 
 #include <video/w100fb.h>
 
@@ -51,12 +52,20 @@ void __init eseries_fixup(struct machine_desc *desc,
 		mi->bank[0].size = (64*1024*1024);
 }
 
-struct pxa2xx_udc_mach_info e7xx_udc_mach_info = {
+struct gpio_vbus_mach_info e7xx_udc_info = {
 	.gpio_vbus   = GPIO_E7XX_USB_DISC,
 	.gpio_pullup = GPIO_E7XX_USB_PULLUP,
 	.gpio_pullup_inverted = 1
 };
 
+static struct platform_device e7xx_gpio_vbus = {
+	.name	= "gpio-vbus",
+	.id	= -1,
+	.dev	= {
+		.platform_data	= &e7xx_udc_info,
+	},
+};
+
 struct pxaficp_platform_data e7xx_ficp_platform_data = {
 	.gpio_pwdown		= GPIO_E7XX_IR_OFF,
 	.transceiver_cap	= IR_SIRMODE | IR_OFF,
@@ -165,6 +174,7 @@ static struct platform_device e330_tc6387xb_device = {
 
 static struct platform_device *e330_devices[] __initdata = {
 	&e330_tc6387xb_device,
+	&e7xx_gpio_vbus,
 };
 
 static void __init e330_init(void)
@@ -175,7 +185,6 @@ static void __init e330_init(void)
 	eseries_register_clks();
 	eseries_get_tmio_gpios();
 	platform_add_devices(ARRAY_AND_SIZE(e330_devices));
-	pxa_set_udc_info(&e7xx_udc_mach_info);
 }
 
 MACHINE_START(E330, "Toshiba e330")
@@ -214,6 +223,7 @@ static struct platform_device e350_t7l66xb_device = {
 
 static struct platform_device *e350_devices[] __initdata = {
 	&e350_t7l66xb_device,
+	&e7xx_gpio_vbus,
 };
 
 static void __init e350_init(void)
@@ -224,7 +234,6 @@ static void __init e350_init(void)
 	eseries_register_clks();
 	eseries_get_tmio_gpios();
 	platform_add_devices(ARRAY_AND_SIZE(e350_devices));
-	pxa_set_udc_info(&e7xx_udc_mach_info);
 }
 
 MACHINE_START(E350, "Toshiba e350")
@@ -333,6 +342,7 @@ static struct platform_device e400_t7l66xb_device = {
 
 static struct platform_device *e400_devices[] __initdata = {
 	&e400_t7l66xb_device,
+	&e7xx_gpio_vbus,
 };
 
 static void __init e400_init(void)
@@ -346,7 +356,6 @@ static void __init e400_init(void)
 	eseries_get_tmio_gpios();
 	pxa_set_fb_info(NULL, &e400_pxafb_mach_info);
 	platform_add_devices(ARRAY_AND_SIZE(e400_devices));
-	pxa_set_udc_info(&e7xx_udc_mach_info);
 }
 
 MACHINE_START(E400, "Toshiba e400")
@@ -519,6 +528,7 @@ static struct platform_device e740_t7l66xb_device = {
 static struct platform_device *e740_devices[] __initdata = {
 	&e740_fb_device,
 	&e740_t7l66xb_device,
+	&e7xx_gpio_vbus,
 };
 
 static void __init e740_init(void)
@@ -532,7 +542,6 @@ static void __init e740_init(void)
 			"UDCCLK", &pxa25x_device_udc.dev),
 	eseries_get_tmio_gpios();
 	platform_add_devices(ARRAY_AND_SIZE(e740_devices));
-	pxa_set_udc_info(&e7xx_udc_mach_info);
 	pxa_set_ac97_info(NULL);
 	pxa_set_ficp_info(&e7xx_ficp_platform_data);
 }
@@ -711,6 +720,7 @@ static struct platform_device e750_tc6393xb_device = {
 static struct platform_device *e750_devices[] __initdata = {
 	&e750_fb_device,
 	&e750_tc6393xb_device,
+	&e7xx_gpio_vbus,
 };
 
 static void __init e750_init(void)
@@ -723,7 +733,6 @@ static void __init e750_init(void)
 			"GPIO11_CLK", NULL),
 	eseries_get_tmio_gpios();
 	platform_add_devices(ARRAY_AND_SIZE(e750_devices));
-	pxa_set_udc_info(&e7xx_udc_mach_info);
 	pxa_set_ac97_info(NULL);
 	pxa_set_ficp_info(&e7xx_ficp_platform_data);
 }
@@ -873,12 +882,21 @@ static struct platform_device e800_fb_device = {
 
 /* --------------------------- UDC definitions --------------------------- */
 
-static struct pxa2xx_udc_mach_info e800_udc_mach_info = {
+static struct gpio_vbus_mach_info e800_udc_info = {
 	.gpio_vbus   = GPIO_E800_USB_DISC,
 	.gpio_pullup = GPIO_E800_USB_PULLUP,
 	.gpio_pullup_inverted = 1
 };
 
+static struct platform_device e800_gpio_vbus = {
+	.name	= "gpio-vbus",
+	.id	= -1,
+	.dev	= {
+		.platform_data	= &e800_udc_info,
+	},
+};
+
+
 /* ----------------- e800 tc6393xb parameters ------------------ */
 
 static struct tc6393xb_platform_data e800_tc6393xb_info = {
@@ -907,6 +925,7 @@ static struct platform_device e800_tc6393xb_device = {
 static struct platform_device *e800_devices[] __initdata = {
 	&e800_fb_device,
 	&e800_tc6393xb_device,
+	&e800_gpio_vbus,
 };
 
 static void __init e800_init(void)
@@ -919,7 +938,6 @@ static void __init e800_init(void)
 			"GPIO11_CLK", NULL),
 	eseries_get_tmio_gpios();
 	platform_add_devices(ARRAY_AND_SIZE(e800_devices));
-	pxa_set_udc_info(&e800_udc_mach_info);
 	pxa_set_ac97_info(NULL);
 }
 
-- 
cgit v0.10.2


From d19f4cbd4ba08d32d5e5d0cbc98f920fcc225448 Mon Sep 17 00:00:00 2001
From: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Date: Mon, 14 Feb 2011 15:33:17 +0300
Subject: ARM: pxa/gumstix: switch to using gpio-vbus transceiver

Switch from handling gpio-vbus in pxa25x_udc to using standard gpio-vbus
tranceiver.

Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Cc: Steve Sakoman <sakoman@gmail.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>

diff --git a/arch/arm/mach-pxa/gumstix.c b/arch/arm/mach-pxa/gumstix.c
index 6fd319e..d65e4bd 100644
--- a/arch/arm/mach-pxa/gumstix.c
+++ b/arch/arm/mach-pxa/gumstix.c
@@ -26,6 +26,7 @@
 #include <linux/gpio.h>
 #include <linux/err.h>
 #include <linux/clk.h>
+#include <linux/usb/gpio_vbus.h>
 
 #include <asm/setup.h>
 #include <asm/memory.h>
@@ -106,14 +107,22 @@ static void __init gumstix_mmc_init(void)
 #endif
 
 #ifdef CONFIG_USB_GADGET_PXA25X
-static struct pxa2xx_udc_mach_info gumstix_udc_info __initdata = {
+static struct gpio_vbus_mach_info gumstix_udc_info = {
 	.gpio_vbus		= GPIO_GUMSTIX_USB_GPIOn,
 	.gpio_pullup		= GPIO_GUMSTIX_USB_GPIOx,
 };
 
+static struct platform_device gumstix_gpio_vbus = {
+	.name	= "gpio-vbus",
+	.id	= -1,
+	.dev	= {
+		.platform_data	= &gumstix_udc_info,
+	},
+};
+
 static void __init gumstix_udc_init(void)
 {
-	pxa_set_udc_info(&gumstix_udc_info);
+	platform_device_register(&gumstix_gpio_vbus);
 }
 #else
 static void gumstix_udc_init(void)
-- 
cgit v0.10.2


From ef8b3cc68a1df83717bc8f9e7737084246a56ce2 Mon Sep 17 00:00:00 2001
From: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Date: Mon, 14 Feb 2011 15:33:18 +0300
Subject: ARM: pxa/tosa: switch to using gpio-vbus transceiver

Switch from handling gpio-vbus in pxa25x_udc to using standard gpio-vbus
tranceiver.

Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>

diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c
index f2582ec..93a8903 100644
--- a/arch/arm/mach-pxa/tosa.c
+++ b/arch/arm/mach-pxa/tosa.c
@@ -34,6 +34,7 @@
 #include <linux/spi/spi.h>
 #include <linux/spi/pxa2xx_spi.h>
 #include <linux/input/matrix_keypad.h>
+#include <linux/usb/gpio_vbus.h>
 
 #include <asm/setup.h>
 #include <asm/mach-types.h>
@@ -240,12 +241,20 @@ static struct scoop_pcmcia_config tosa_pcmcia_config = {
 /*
  * USB Device Controller
  */
-static struct pxa2xx_udc_mach_info udc_info __initdata = {
+static struct gpio_vbus_mach_info tosa_udc_info = {
 	.gpio_pullup		= TOSA_GPIO_USB_PULLUP,
 	.gpio_vbus		= TOSA_GPIO_USB_IN,
 	.gpio_vbus_inverted	= 1,
 };
 
+static struct platform_device tosa_gpio_vbus = {
+	.name	= "gpio-vbus",
+	.id	= -1,
+	.dev	= {
+		.platform_data	= &tosa_udc_info,
+	},
+};
+
 /*
  * MMC/SD Device
  */
@@ -891,6 +900,7 @@ static struct platform_device *devices[] __initdata = {
 	&tosa_bt_device,
 	&sharpsl_rom_device,
 	&wm9712_device,
+	&tosa_gpio_vbus,
 };
 
 static void tosa_poweroff(void)
@@ -937,7 +947,6 @@ static void __init tosa_init(void)
 	dummy = gpiochip_reserve(TOSA_TC6393XB_GPIO_BASE, 16);
 
 	pxa_set_mci_info(&tosa_mci_platform_data);
-	pxa_set_udc_info(&udc_info);
 	pxa_set_ficp_info(&tosa_ficp_platform_data);
 	pxa_set_i2c_info(NULL);
 	pxa_set_ac97_info(NULL);
-- 
cgit v0.10.2


From a8ecc860ef117f9405758d8d1378553afcdd9ca3 Mon Sep 17 00:00:00 2001
From: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Date: Mon, 14 Feb 2011 15:33:19 +0300
Subject: ARM: pxa25x_udc: stop handling gpio-vbus internally

Stop handling gpio-vbus internally. All boards that depended on this
functionality have been converted to use gpio-vbus tranceiver. All
new boards can use it right from the start. Drop unused code.

Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>

diff --git a/drivers/usb/gadget/pxa25x_udc.c b/drivers/usb/gadget/pxa25x_udc.c
index b37f92c..444b60a 100644
--- a/drivers/usb/gadget/pxa25x_udc.c
+++ b/drivers/usb/gadget/pxa25x_udc.c
@@ -139,24 +139,6 @@ static const char ep0name [] = "ep0";
 static void pxa25x_ep_fifo_flush (struct usb_ep *ep);
 static void nuke (struct pxa25x_ep *, int status);
 
-/* one GPIO should be used to detect VBUS from the host */
-static int is_vbus_present(void)
-{
-	struct pxa2xx_udc_mach_info		*mach = the_controller->mach;
-
-	if (gpio_is_valid(mach->gpio_vbus)) {
-		int value = gpio_get_value(mach->gpio_vbus);
-
-		if (mach->gpio_vbus_inverted)
-			return !value;
-		else
-			return !!value;
-	}
-	if (mach->udc_is_connected)
-		return mach->udc_is_connected();
-	return 1;
-}
-
 /* one GPIO should control a D+ pullup, so host sees this device (or not) */
 static void pullup_off(void)
 {
@@ -1055,7 +1037,7 @@ udc_seq_show(struct seq_file *m, void *_d)
 		"%s version: %s\nGadget driver: %s\nHost %s\n\n",
 		driver_name, DRIVER_VERSION SIZE_STR "(pio)",
 		dev->driver ? dev->driver->driver.name : "(none)",
-		is_vbus_present() ? "full speed" : "disconnected");
+		dev->gadget.speed == USB_SPEED_FULL ? "full speed" : "disconnected");
 
 	/* registers for device and ep0 */
 	seq_printf(m,
@@ -1094,7 +1076,7 @@ udc_seq_show(struct seq_file *m, void *_d)
 			(tmp & UDCCFR_ACM) ? " acm" : "");
 	}
 
-	if (!is_vbus_present() || !dev->driver)
+	if (dev->gadget.speed != USB_SPEED_FULL || !dev->driver)
 		goto done;
 
 	seq_printf(m, "ep0 IN %lu/%lu, OUT %lu/%lu\nirqs %lu\n\n",
@@ -1435,14 +1417,6 @@ lubbock_vbus_irq(int irq, void *_dev)
 
 #endif
 
-static irqreturn_t udc_vbus_irq(int irq, void *_dev)
-{
-	struct pxa25x_udc	*dev = _dev;
-
-	pxa25x_udc_vbus_session(&dev->gadget, is_vbus_present());
-	return IRQ_HANDLED;
-}
-
 
 /*-------------------------------------------------------------------------*/
 
@@ -1766,12 +1740,9 @@ pxa25x_udc_irq(int irq, void *_dev)
 		if (unlikely(udccr & UDCCR_SUSIR)) {
 			udc_ack_int_UDCCR(UDCCR_SUSIR);
 			handled = 1;
-			DBG(DBG_VERBOSE, "USB suspend%s\n", is_vbus_present()
-				? "" : "+disconnect");
+			DBG(DBG_VERBOSE, "USB suspend\n");
 
-			if (!is_vbus_present())
-				stop_activity(dev, dev->driver);
-			else if (dev->gadget.speed != USB_SPEED_UNKNOWN
+			if (dev->gadget.speed != USB_SPEED_UNKNOWN
 					&& dev->driver
 					&& dev->driver->suspend)
 				dev->driver->suspend(&dev->gadget);
@@ -1786,8 +1757,7 @@ pxa25x_udc_irq(int irq, void *_dev)
 
 			if (dev->gadget.speed != USB_SPEED_UNKNOWN
 					&& dev->driver
-					&& dev->driver->resume
-					&& is_vbus_present())
+					&& dev->driver->resume)
 				dev->driver->resume(&dev->gadget);
 		}
 
@@ -2137,7 +2107,7 @@ static struct pxa25x_udc memory = {
 static int __init pxa25x_udc_probe(struct platform_device *pdev)
 {
 	struct pxa25x_udc *dev = &memory;
-	int retval, vbus_irq, irq;
+	int retval, irq;
 	u32 chiprev;
 
 	/* insist on Intel/ARM/XScale */
@@ -2199,19 +2169,6 @@ static int __init pxa25x_udc_probe(struct platform_device *pdev)
 
 	dev->transceiver = otg_get_transceiver();
 
-	if (gpio_is_valid(dev->mach->gpio_vbus)) {
-		if ((retval = gpio_request(dev->mach->gpio_vbus,
-				"pxa25x_udc GPIO VBUS"))) {
-			dev_dbg(&pdev->dev,
-				"can't get vbus gpio %d, err: %d\n",
-				dev->mach->gpio_vbus, retval);
-			goto err_gpio_vbus;
-		}
-		gpio_direction_input(dev->mach->gpio_vbus);
-		vbus_irq = gpio_to_irq(dev->mach->gpio_vbus);
-	} else
-		vbus_irq = 0;
-
 	if (gpio_is_valid(dev->mach->gpio_pullup)) {
 		if ((retval = gpio_request(dev->mach->gpio_pullup,
 				"pca25x_udc GPIO PULLUP"))) {
@@ -2237,7 +2194,7 @@ static int __init pxa25x_udc_probe(struct platform_device *pdev)
 	udc_disable(dev);
 	udc_reinit(dev);
 
-	dev->vbus = !!is_vbus_present();
+	dev->vbus = 0;
 
 	/* irq setup after old hardware state is cleaned up */
 	retval = request_irq(irq, pxa25x_udc_irq,
@@ -2273,22 +2230,10 @@ lubbock_fail0:
 		}
 	} else
 #endif
-	if (vbus_irq) {
-		retval = request_irq(vbus_irq, udc_vbus_irq,
-				IRQF_DISABLED | IRQF_SAMPLE_RANDOM |
-				IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
-				driver_name, dev);
-		if (retval != 0) {
-			pr_err("%s: can't get irq %i, err %d\n",
-				driver_name, vbus_irq, retval);
-			goto err_vbus_irq;
-		}
-	}
 	create_debug_files(dev);
 
 	return 0;
 
- err_vbus_irq:
 #ifdef	CONFIG_ARCH_LUBBOCK
 	free_irq(LUBBOCK_USB_DISC_IRQ, dev);
  err_irq_lub:
@@ -2298,9 +2243,6 @@ lubbock_fail0:
 	if (gpio_is_valid(dev->mach->gpio_pullup))
 		gpio_free(dev->mach->gpio_pullup);
  err_gpio_pullup:
-	if (gpio_is_valid(dev->mach->gpio_vbus))
-		gpio_free(dev->mach->gpio_vbus);
- err_gpio_vbus:
 	if (dev->transceiver) {
 		otg_put_transceiver(dev->transceiver);
 		dev->transceiver = NULL;
@@ -2337,10 +2279,6 @@ static int __exit pxa25x_udc_remove(struct platform_device *pdev)
 		free_irq(LUBBOCK_USB_IRQ, dev);
 	}
 #endif
-	if (gpio_is_valid(dev->mach->gpio_vbus)) {
-		free_irq(gpio_to_irq(dev->mach->gpio_vbus), dev);
-		gpio_free(dev->mach->gpio_vbus);
-	}
 	if (gpio_is_valid(dev->mach->gpio_pullup))
 		gpio_free(dev->mach->gpio_pullup);
 
-- 
cgit v0.10.2


From 1014cc38280f29ea0a39ec9a853fa0c3fdfebc7c Mon Sep 17 00:00:00 2001
From: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Date: Mon, 14 Feb 2011 15:33:20 +0300
Subject: ARM: pxa: drop gpio_vbus field from pxa2xx_udc_mach_info

Neither pxa25x_udc, nor pxa27x_udc use gpio_vbus/gpio_vbus_inverted
anymore. Drop those two fields from udc info completely.

Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>

diff --git a/arch/arm/include/asm/mach/udc_pxa2xx.h b/arch/arm/include/asm/mach/udc_pxa2xx.h
index 833306e..ea297ac 100644
--- a/arch/arm/include/asm/mach/udc_pxa2xx.h
+++ b/arch/arm/include/asm/mach/udc_pxa2xx.h
@@ -20,8 +20,6 @@ struct pxa2xx_udc_mach_info {
 	 * VBUS IRQ and omit the methods above.  Store the GPIO number
 	 * here.  Note that sometimes the signals go through inverters...
 	 */
-	bool	gpio_vbus_inverted;
-	int	gpio_vbus;			/* high == vbus present */
 	bool	gpio_pullup_inverted;
 	int	gpio_pullup;			/* high == pullup activated */
 };
diff --git a/arch/arm/mach-pxa/corgi.c b/arch/arm/mach-pxa/corgi.c
index a5452a3..002be00 100644
--- a/arch/arm/mach-pxa/corgi.c
+++ b/arch/arm/mach-pxa/corgi.c
@@ -462,7 +462,6 @@ static struct pxaficp_platform_data corgi_ficp_platform_data = {
  * USB Device Controller
  */
 static struct pxa2xx_udc_mach_info udc_info __initdata = {
-	.gpio_vbus		= -1,
 	/* no connect GPIO; corgi can't tell connection status */
 	.gpio_pullup		= CORGI_GPIO_USB_PULLUP,
 };
diff --git a/arch/arm/mach-pxa/devices.c b/arch/arm/mach-pxa/devices.c
index edfe803..8dcc92b 100644
--- a/arch/arm/mach-pxa/devices.c
+++ b/arch/arm/mach-pxa/devices.c
@@ -90,7 +90,6 @@ void __init pxa_set_mci_info(struct pxamci_platform_data *info)
 
 static struct pxa2xx_udc_mach_info pxa_udc_info = {
 	.gpio_pullup = -1,
-	.gpio_vbus   = -1,
 };
 
 void __init pxa_set_udc_info(struct pxa2xx_udc_mach_info *info)
-- 
cgit v0.10.2


From 1b98d7c4491e5eaba7c403ec1bc5997e6596e569 Mon Sep 17 00:00:00 2001
From: Vasily Khoruzhick <anarsoul@gmail.com>
Date: Fri, 11 Mar 2011 11:20:47 +0200
Subject: ARM: pxafb: rework pxafb overlay memory management

PXAFB overlay memory management is something messy:
- it allocates memory dynamically on open/release, and it results
  in memory allocation failure after ~1h of uptime (system does not have
  115k of physically contiguous memory)
- in release callback it tries to free memory even if it was not
  allocated.

Also driver touches FDADR1 on main plane reconfiguration, and it can cause
problems if overlay1 is enabled.

This patch attempts to fix those issues.

Patch is based on Russell King's work.

Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>

diff --git a/drivers/video/pxafb.c b/drivers/video/pxafb.c
index 825b665..0764759 100644
--- a/drivers/video/pxafb.c
+++ b/drivers/video/pxafb.c
@@ -627,7 +627,12 @@ static void overlay1fb_enable(struct pxafb_layer *ofb)
 
 static void overlay1fb_disable(struct pxafb_layer *ofb)
 {
-	uint32_t lccr5 = lcd_readl(ofb->fbi, LCCR5);
+	uint32_t lccr5;
+
+	if (!(lcd_readl(ofb->fbi, OVL1C1) & OVLxC1_OEN))
+		return;
+
+	lccr5 = lcd_readl(ofb->fbi, LCCR5);
 
 	lcd_writel(ofb->fbi, OVL1C1, ofb->control[0] & ~OVLxC1_OEN);
 
@@ -685,7 +690,12 @@ static void overlay2fb_enable(struct pxafb_layer *ofb)
 
 static void overlay2fb_disable(struct pxafb_layer *ofb)
 {
-	uint32_t lccr5 = lcd_readl(ofb->fbi, LCCR5);
+	uint32_t lccr5;
+
+	if (!(lcd_readl(ofb->fbi, OVL2C1) & OVLxC1_OEN))
+		return;
+
+	lccr5 = lcd_readl(ofb->fbi, LCCR5);
 
 	lcd_writel(ofb->fbi, OVL2C1, ofb->control[0] & ~OVLxC1_OEN);
 
@@ -720,12 +730,10 @@ static int overlayfb_open(struct fb_info *info, int user)
 	if (user == 0)
 		return -ENODEV;
 
-	/* allow only one user at a time */
-	if (atomic_inc_and_test(&ofb->usage))
-		return -EBUSY;
+	if (ofb->usage++ == 0)
+		/* unblank the base framebuffer */
+		fb_blank(&ofb->fbi->fb, FB_BLANK_UNBLANK);
 
-	/* unblank the base framebuffer */
-	fb_blank(&ofb->fbi->fb, FB_BLANK_UNBLANK);
 	return 0;
 }
 
@@ -733,12 +741,15 @@ static int overlayfb_release(struct fb_info *info, int user)
 {
 	struct pxafb_layer *ofb = (struct pxafb_layer*) info;
 
-	atomic_dec(&ofb->usage);
-	ofb->ops->disable(ofb);
+	if (ofb->usage == 1) {
+		ofb->ops->disable(ofb);
+		ofb->fb.var.height	= -1;
+		ofb->fb.var.width	= -1;
+		ofb->fb.var.xres = ofb->fb.var.xres_virtual = 0;
+		ofb->fb.var.yres = ofb->fb.var.yres_virtual = 0;
 
-	free_pages_exact(ofb->video_mem, ofb->video_mem_size);
-	ofb->video_mem = NULL;
-	ofb->video_mem_size = 0;
+		ofb->usage--;
+	}
 	return 0;
 }
 
@@ -794,7 +805,7 @@ static int overlayfb_check_var(struct fb_var_screeninfo *var,
 	return 0;
 }
 
-static int overlayfb_map_video_memory(struct pxafb_layer *ofb)
+static int overlayfb_check_video_memory(struct pxafb_layer *ofb)
 {
 	struct fb_var_screeninfo *var = &ofb->fb.var;
 	int pfor = NONSTD_TO_PFOR(var->nonstd);
@@ -812,27 +823,11 @@ static int overlayfb_map_video_memory(struct pxafb_layer *ofb)
 
 	size = PAGE_ALIGN(ofb->fb.fix.line_length * var->yres_virtual);
 
-	/* don't re-allocate if the original video memory is enough */
 	if (ofb->video_mem) {
 		if (ofb->video_mem_size >= size)
 			return 0;
-
-		free_pages_exact(ofb->video_mem, ofb->video_mem_size);
 	}
-
-	ofb->video_mem = alloc_pages_exact(size, GFP_KERNEL | __GFP_ZERO);
-	if (ofb->video_mem == NULL)
-		return -ENOMEM;
-
-	ofb->video_mem_phys = virt_to_phys(ofb->video_mem);
-	ofb->video_mem_size = size;
-
-	mutex_lock(&ofb->fb.mm_lock);
-	ofb->fb.fix.smem_start	= ofb->video_mem_phys;
-	ofb->fb.fix.smem_len	= ofb->fb.fix.line_length * var->yres_virtual;
-	mutex_unlock(&ofb->fb.mm_lock);
-	ofb->fb.screen_base	= ofb->video_mem;
-	return 0;
+	return -EINVAL;
 }
 
 static int overlayfb_set_par(struct fb_info *info)
@@ -841,7 +836,7 @@ static int overlayfb_set_par(struct fb_info *info)
 	struct fb_var_screeninfo *var = &info->var;
 	int xpos, ypos, pfor, bpp, ret;
 
-	ret = overlayfb_map_video_memory(ofb);
+	ret = overlayfb_check_video_memory(ofb);
 	if (ret)
 		return ret;
 
@@ -891,7 +886,7 @@ static void __devinit init_pxafb_overlay(struct pxafb_info *fbi,
 
 	ofb->id = id;
 	ofb->ops = &ofb_ops[id];
-	atomic_set(&ofb->usage, 0);
+	ofb->usage = 0;
 	ofb->fbi = fbi;
 	init_completion(&ofb->branch_done);
 }
@@ -904,20 +899,54 @@ static inline int pxafb_overlay_supported(void)
 	return 0;
 }
 
-static int __devinit pxafb_overlay_init(struct pxafb_info *fbi)
+static int __devinit pxafb_overlay_map_video_memory(struct pxafb_info *pxafb,
+	struct pxafb_layer *ofb)
+{
+	/* We assume that user will use at most video_mem_size for overlay fb,
+	 * anyway, it's useless to use 16bpp main plane and 24bpp overlay
+	 */
+	ofb->video_mem = alloc_pages_exact(PAGE_ALIGN(pxafb->video_mem_size),
+		GFP_KERNEL | __GFP_ZERO);
+	if (ofb->video_mem == NULL)
+		return -ENOMEM;
+
+	ofb->video_mem_phys = virt_to_phys(ofb->video_mem);
+	ofb->video_mem_size = PAGE_ALIGN(pxafb->video_mem_size);
+
+	mutex_lock(&ofb->fb.mm_lock);
+	ofb->fb.fix.smem_start	= ofb->video_mem_phys;
+	ofb->fb.fix.smem_len	= pxafb->video_mem_size;
+	mutex_unlock(&ofb->fb.mm_lock);
+
+	ofb->fb.screen_base	= ofb->video_mem;
+
+	return 0;
+}
+
+static void __devinit pxafb_overlay_init(struct pxafb_info *fbi)
 {
 	int i, ret;
 
 	if (!pxafb_overlay_supported())
-		return 0;
+		return;
 
 	for (i = 0; i < 2; i++) {
-		init_pxafb_overlay(fbi, &fbi->overlay[i], i);
-		ret = register_framebuffer(&fbi->overlay[i].fb);
+		struct pxafb_layer *ofb = &fbi->overlay[i];
+		init_pxafb_overlay(fbi, ofb, i);
+		ret = register_framebuffer(&ofb->fb);
 		if (ret) {
 			dev_err(fbi->dev, "failed to register overlay %d\n", i);
-			return ret;
+			continue;
+		}
+		ret = pxafb_overlay_map_video_memory(fbi, ofb);
+		if (ret) {
+			dev_err(fbi->dev,
+				"failed to map video memory for overlay %d\n",
+				i);
+			unregister_framebuffer(&ofb->fb);
+			continue;
 		}
+		ofb->registered = 1;
 	}
 
 	/* mask all IU/BS/EOF/SOF interrupts */
@@ -926,7 +955,6 @@ static int __devinit pxafb_overlay_init(struct pxafb_info *fbi)
 	/* place overlay(s) on top of base */
 	fbi->lccr0 |= LCCR0_OUC;
 	pr_info("PXA Overlay driver loaded successfully!\n");
-	return 0;
 }
 
 static void __devexit pxafb_overlay_exit(struct pxafb_info *fbi)
@@ -936,8 +964,15 @@ static void __devexit pxafb_overlay_exit(struct pxafb_info *fbi)
 	if (!pxafb_overlay_supported())
 		return;
 
-	for (i = 0; i < 2; i++)
-		unregister_framebuffer(&fbi->overlay[i].fb);
+	for (i = 0; i < 2; i++) {
+		struct pxafb_layer *ofb = &fbi->overlay[i];
+		if (ofb->registered) {
+			if (ofb->video_mem)
+				free_pages_exact(ofb->video_mem,
+					ofb->video_mem_size);
+			unregister_framebuffer(&ofb->fb);
+		}
+	}
 }
 #else
 static inline void pxafb_overlay_init(struct pxafb_info *fbi) {}
@@ -1368,7 +1403,8 @@ static int pxafb_activate_var(struct fb_var_screeninfo *var,
 	    (lcd_readl(fbi, LCCR3) != fbi->reg_lccr3) ||
 	    (lcd_readl(fbi, LCCR4) != fbi->reg_lccr4) ||
 	    (lcd_readl(fbi, FDADR0) != fbi->fdadr[0]) ||
-	    (lcd_readl(fbi, FDADR1) != fbi->fdadr[1]))
+	    ((fbi->lccr0 & LCCR0_SDS) &&
+	    (lcd_readl(fbi, FDADR1) != fbi->fdadr[1])))
 		pxafb_schedule_work(fbi, C_REENABLE);
 
 	return 0;
@@ -1420,7 +1456,8 @@ static void pxafb_enable_controller(struct pxafb_info *fbi)
 	lcd_writel(fbi, LCCR0, fbi->reg_lccr0 & ~LCCR0_ENB);
 
 	lcd_writel(fbi, FDADR0, fbi->fdadr[0]);
-	lcd_writel(fbi, FDADR1, fbi->fdadr[1]);
+	if (fbi->lccr0 & LCCR0_SDS)
+		lcd_writel(fbi, FDADR1, fbi->fdadr[1]);
 	lcd_writel(fbi, LCCR0, fbi->reg_lccr0 | LCCR0_ENB);
 }
 
diff --git a/drivers/video/pxafb.h b/drivers/video/pxafb.h
index 2353521..26ba9fa 100644
--- a/drivers/video/pxafb.h
+++ b/drivers/video/pxafb.h
@@ -92,7 +92,8 @@ struct pxafb_layer_ops {
 struct pxafb_layer {
 	struct fb_info		fb;
 	int			id;
-	atomic_t		usage;
+	int			registered;
+	uint32_t		usage;
 	uint32_t		control[2];
 
 	struct pxafb_layer_ops	*ops;
-- 
cgit v0.10.2


From 7779cee3f45122d2f81397f55d7a14f654a0b276 Mon Sep 17 00:00:00 2001
From: Vasily Khoruzhick <anarsoul@gmail.com>
Date: Fri, 11 Mar 2011 11:20:48 +0200
Subject: ARM: pxafb: fix plane Z-ordering problem

pxafb_overlay_init is not right place to change Z-ordering,
move it to main plane initialization.

Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>

diff --git a/drivers/video/pxafb.c b/drivers/video/pxafb.c
index 0764759..e2f643e 100644
--- a/drivers/video/pxafb.c
+++ b/drivers/video/pxafb.c
@@ -952,8 +952,6 @@ static void __devinit pxafb_overlay_init(struct pxafb_info *fbi)
 	/* mask all IU/BS/EOF/SOF interrupts */
 	lcd_writel(fbi, LCCR5, ~0);
 
-	/* place overlay(s) on top of base */
-	fbi->lccr0 |= LCCR0_OUC;
 	pr_info("PXA Overlay driver loaded successfully!\n");
 }
 
@@ -1843,6 +1841,12 @@ static struct pxafb_info * __devinit pxafb_init_fbinfo(struct device *dev)
 
 	pxafb_decode_mach_info(fbi, inf);
 
+#ifdef CONFIG_FB_PXA_OVERLAY
+	/* place overlay(s) on top of base */
+	if (pxafb_overlay_supported())
+		fbi->lccr0 |= LCCR0_OUC;
+#endif
+
 	init_waitqueue_head(&fbi->ctrlr_wait);
 	INIT_WORK(&fbi->task, pxafb_task);
 	mutex_init(&fbi->ctrlr_lock);
-- 
cgit v0.10.2


From dcf8eee94f7eb2671e6d5774e81d45ad06b4f980 Mon Sep 17 00:00:00 2001
From: Vasily Khoruzhick <anarsoul@gmail.com>
Date: Fri, 11 Mar 2011 11:20:49 +0200
Subject: ARM: pxafb: fix typo in ypos assignment

Sascha Hauer <s.hauer@pengutronix.de> pointed that
ypos takes value of xpos due to typo.

Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>

diff --git a/drivers/video/pxafb.c b/drivers/video/pxafb.c
index e2f643e..a3bdcc1 100644
--- a/drivers/video/pxafb.c
+++ b/drivers/video/pxafb.c
@@ -761,7 +761,7 @@ static int overlayfb_check_var(struct fb_var_screeninfo *var,
 	int xpos, ypos, pfor, bpp;
 
 	xpos = NONSTD_TO_XPOS(var->nonstd);
-	ypos = NONSTD_TO_XPOS(var->nonstd);
+	ypos = NONSTD_TO_YPOS(var->nonstd);
 	pfor = NONSTD_TO_PFOR(var->nonstd);
 
 	bpp = pxafb_var_to_bpp(var);
@@ -842,7 +842,7 @@ static int overlayfb_set_par(struct fb_info *info)
 
 	bpp  = pxafb_var_to_bpp(var);
 	xpos = NONSTD_TO_XPOS(var->nonstd);
-	ypos = NONSTD_TO_XPOS(var->nonstd);
+	ypos = NONSTD_TO_YPOS(var->nonstd);
 	pfor = NONSTD_TO_PFOR(var->nonstd);
 
 	ofb->control[0] = OVLxC1_PPL(var->xres) | OVLxC1_LPO(var->yres) |
-- 
cgit v0.10.2


From 27be9a9e378dad166fc81df310e052e7b67cb667 Mon Sep 17 00:00:00 2001
From: Vasily Khoruzhick <anarsoul@gmail.com>
Date: Fri, 11 Mar 2011 11:20:50 +0200
Subject: ARM: pxafb: don't disable controller on cpufreq transition if overlay
 in use

It's not safe to disable controller if overlay(s) is enabled (results in
system hang). So we avoid to disable controller in this case. Userspace
should choose proper governor to avoid freq changing when overlay is in
use, otherwise LCD may blink.

Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>

diff --git a/drivers/video/pxafb.c b/drivers/video/pxafb.c
index a3bdcc1..a2e5b51 100644
--- a/drivers/video/pxafb.c
+++ b/drivers/video/pxafb.c
@@ -1648,7 +1648,8 @@ pxafb_freq_transition(struct notifier_block *nb, unsigned long val, void *data)
 
 	switch (val) {
 	case CPUFREQ_PRECHANGE:
-		set_ctrlr_state(fbi, C_DISABLE_CLKCHANGE);
+		if (!fbi->overlay[0].usage && !fbi->overlay[1].usage)
+			set_ctrlr_state(fbi, C_DISABLE_CLKCHANGE);
 		break;
 
 	case CPUFREQ_POSTCHANGE:
-- 
cgit v0.10.2


From 2e62344de8e2a7e402fe2a009c3d09bc6fd589e6 Mon Sep 17 00:00:00 2001
From: Vasily Khoruzhick <anarsoul@gmail.com>
Date: Sun, 13 Mar 2011 17:19:17 +0200
Subject: ARM: PXA: Z2: Use only power button as wake source

It's very easy to press some keypad key when Z2 is closed,
so to prevent unexpected wakeups, use only 'Power' key to wake
Z2 from sleep.

Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Acked-by: Marek Vasut <marek.vasut@gmail.com>

diff --git a/arch/arm/mach-pxa/z2.c b/arch/arm/mach-pxa/z2.c
index 084c724..db6199c 100644
--- a/arch/arm/mach-pxa/z2.c
+++ b/arch/arm/mach-pxa/z2.c
@@ -92,13 +92,13 @@ static unsigned long z2_pin_config[] = {
 	GPIO47_STUART_TXD,
 
 	/* Keypad */
-	GPIO100_KP_MKIN_0	| WAKEUP_ON_LEVEL_HIGH,
-	GPIO101_KP_MKIN_1	| WAKEUP_ON_LEVEL_HIGH,
-	GPIO102_KP_MKIN_2	| WAKEUP_ON_LEVEL_HIGH,
-	GPIO34_KP_MKIN_3	| WAKEUP_ON_LEVEL_HIGH,
-	GPIO38_KP_MKIN_4	| WAKEUP_ON_LEVEL_HIGH,
-	GPIO16_KP_MKIN_5	| WAKEUP_ON_LEVEL_HIGH,
-	GPIO17_KP_MKIN_6	| WAKEUP_ON_LEVEL_HIGH,
+	GPIO100_KP_MKIN_0,
+	GPIO101_KP_MKIN_1,
+	GPIO102_KP_MKIN_2,
+	GPIO34_KP_MKIN_3,
+	GPIO38_KP_MKIN_4,
+	GPIO16_KP_MKIN_5,
+	GPIO17_KP_MKIN_6,
 	GPIO103_KP_MKOUT_0,
 	GPIO104_KP_MKOUT_1,
 	GPIO105_KP_MKOUT_2,
@@ -428,8 +428,22 @@ static inline void z2_mkp_init(void) {}
  ******************************************************************************/
 #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
 static struct gpio_keys_button z2_pxa_buttons[] = {
-	{KEY_POWER, GPIO1_ZIPITZ2_POWER_BUTTON, 0, "Power Button" },
-	{KEY_CLOSE, GPIO98_ZIPITZ2_LID_BUTTON, 0, "Lid Button" },
+	{
+		.code		= KEY_POWER,
+		.gpio		= GPIO1_ZIPITZ2_POWER_BUTTON,
+		.active_low	= 0,
+		.desc		= "Power Button",
+		.wakeup		= 1,
+		.type		= EV_KEY,
+	},
+	{
+		.code		= KEY_CLOSE,
+		.gpio		= GPIO98_ZIPITZ2_LID_BUTTON,
+		.active_low	= 0,
+		.desc		= "Lid Button",
+		.wakeup		= 0
+		.type		= EV_KEY,
+	},
 };
 
 static struct gpio_keys_platform_data z2_pxa_keys_data = {
-- 
cgit v0.10.2


From 233cdbce55b8948b46fcd76ad77c1f33b8c01095 Mon Sep 17 00:00:00 2001
From: Vasily Khoruzhick <anarsoul@gmail.com>
Date: Sun, 13 Mar 2011 17:19:18 +0200
Subject: ARM: PXA: Z2: Fix battery pdata

Fix coefficients to get actual voltage, and make
voltage_max/voltage_min looks like values for LiIon battery.

Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Acked-by: Marek Vasut <marek.vasut@gmail.com>

diff --git a/arch/arm/mach-pxa/z2.c b/arch/arm/mach-pxa/z2.c
index db6199c..31db09b 100644
--- a/arch/arm/mach-pxa/z2.c
+++ b/arch/arm/mach-pxa/z2.c
@@ -476,9 +476,9 @@ static struct z2_battery_info batt_chip_info = {
 	.batt_I2C_addr	= 0x55,
 	.batt_I2C_reg	= 2,
 	.charge_gpio	= GPIO0_ZIPITZ2_AC_DETECT,
-	.min_voltage	= 2400000,
-	.max_voltage	= 3700000,
-	.batt_div	= 69,
+	.min_voltage	= 3475000,
+	.max_voltage	= 4190000,
+	.batt_div	= 59,
 	.batt_mult	= 1000000,
 	.batt_tech	= POWER_SUPPLY_TECHNOLOGY_LION,
 	.batt_name	= "Z2",
-- 
cgit v0.10.2


From b8f56a78e3a161f10bfd4e648a3d3828718aaa80 Mon Sep 17 00:00:00 2001
From: Vasily Khoruzhick <anarsoul@gmail.com>
Date: Sun, 13 Mar 2011 17:19:19 +0200
Subject: ARM: PXA: Z2: Fix libertas init/tear down sequences

GPIO15 seems to be not related to WiFi, so don't touch it.

Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Acked-by: Marek Vasut <marek.vasut@gmail.com>

diff --git a/arch/arm/mach-pxa/include/mach/z2.h b/arch/arm/mach-pxa/include/mach/z2.h
index 8835c16..7b0f71e 100644
--- a/arch/arm/mach-pxa/include/mach/z2.h
+++ b/arch/arm/mach-pxa/include/mach/z2.h
@@ -25,8 +25,7 @@
 #define	GPIO98_ZIPITZ2_LID_BUTTON	98
 
 /* Libertas GSPI8686 WiFi */
-#define	GPIO14_ZIPITZ2_WIFI_RESET	14
-#define	GPIO15_ZIPITZ2_WIFI_POWER	15
+#define	GPIO14_ZIPITZ2_WIFI_POWER	14
 #define	GPIO24_ZIPITZ2_WIFI_CS		24
 #define	GPIO36_ZIPITZ2_WIFI_IRQ		36
 
diff --git a/arch/arm/mach-pxa/z2.c b/arch/arm/mach-pxa/z2.c
index 31db09b..4df1ecb 100644
--- a/arch/arm/mach-pxa/z2.c
+++ b/arch/arm/mach-pxa/z2.c
@@ -139,8 +139,7 @@ static unsigned long z2_pin_config[] = {
 	GPIO1_GPIO,		/* Power button */
 	GPIO37_GPIO,		/* Headphone detect */
 	GPIO98_GPIO,		/* Lid switch */
-	GPIO14_GPIO,		/* WiFi Reset */
-	GPIO15_GPIO,		/* WiFi Power */
+	GPIO14_GPIO,		/* WiFi Power */
 	GPIO24_GPIO,		/* WiFi CS */
 	GPIO36_GPIO,		/* WiFi IRQ */
 	GPIO88_GPIO,		/* LCD CS */
@@ -512,26 +511,16 @@ static int z2_lbs_spi_setup(struct spi_device *spi)
 {
 	int ret = 0;
 
-	ret = gpio_request(GPIO15_ZIPITZ2_WIFI_POWER, "WiFi Power");
+	ret = gpio_request(GPIO14_ZIPITZ2_WIFI_POWER, "WiFi Power");
 	if (ret)
 		goto err;
 
-	ret = gpio_direction_output(GPIO15_ZIPITZ2_WIFI_POWER, 1);
+	ret = gpio_direction_output(GPIO14_ZIPITZ2_WIFI_POWER, 1);
 	if (ret)
 		goto err2;
 
-	ret = gpio_request(GPIO14_ZIPITZ2_WIFI_RESET, "WiFi Reset");
-	if (ret)
-		goto err2;
-
-	ret = gpio_direction_output(GPIO14_ZIPITZ2_WIFI_RESET, 0);
-	if (ret)
-		goto err3;
-
-	/* Reset the card */
+	/* Wait until card is powered on */
 	mdelay(180);
-	gpio_set_value(GPIO14_ZIPITZ2_WIFI_RESET, 1);
-	mdelay(20);
 
 	spi->bits_per_word = 16;
 	spi->mode = SPI_MODE_2,
@@ -540,22 +529,18 @@ static int z2_lbs_spi_setup(struct spi_device *spi)
 
 	return 0;
 
-err3:
-	gpio_free(GPIO14_ZIPITZ2_WIFI_RESET);
 err2:
-	gpio_free(GPIO15_ZIPITZ2_WIFI_POWER);
+	gpio_free(GPIO14_ZIPITZ2_WIFI_POWER);
 err:
 	return ret;
 };
 
 static int z2_lbs_spi_teardown(struct spi_device *spi)
 {
-	gpio_set_value(GPIO14_ZIPITZ2_WIFI_RESET, 0);
-	gpio_set_value(GPIO15_ZIPITZ2_WIFI_POWER, 0);
-	gpio_free(GPIO14_ZIPITZ2_WIFI_RESET);
-	gpio_free(GPIO15_ZIPITZ2_WIFI_POWER);
-	return 0;
+	gpio_set_value(GPIO14_ZIPITZ2_WIFI_POWER, 0);
+	gpio_free(GPIO14_ZIPITZ2_WIFI_POWER);
 
+	return 0;
 };
 
 static struct pxa2xx_spi_chip z2_lbs_chip_info = {
-- 
cgit v0.10.2


From 034e17563b90fa20342b78a2faac9cba3a1c4a38 Mon Sep 17 00:00:00 2001
From: Vasily Khoruzhick <anarsoul@gmail.com>
Date: Sun, 13 Mar 2011 17:19:20 +0200
Subject: ARM: PXA: Z2: Keep kbd backlight disabled by default

It eats too much power, and anyway it's not usefull
during boot process. Userspace can enable it later.

Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Acked-by: Marek Vasut <marek.vasut@gmail.com>

diff --git a/arch/arm/mach-pxa/z2.c b/arch/arm/mach-pxa/z2.c
index 4df1ecb..9b6ab07 100644
--- a/arch/arm/mach-pxa/z2.c
+++ b/arch/arm/mach-pxa/z2.c
@@ -204,7 +204,7 @@ static struct platform_pwm_backlight_data z2_backlight_data[] = {
 		/* Keypad Backlight */
 		.pwm_id		= 1,
 		.max_brightness	= 1023,
-		.dft_brightness	= 512,
+		.dft_brightness	= 0,
 		.pwm_period_ns	= 1260320,
 	},
 	[1] = {
-- 
cgit v0.10.2


From 54d5710058ebe34451f4ab1d73d86cd8214897b7 Mon Sep 17 00:00:00 2001
From: Vasily Khoruzhick <anarsoul@gmail.com>
Date: Sun, 13 Mar 2011 17:19:21 +0200
Subject: ARM: PXA: Z2: Add default triggers for LEDs

So user can see if there's any mmc activity and if device's
charging.

Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Acked-by: Marek Vasut <marek.vasut@gmail.com>

diff --git a/arch/arm/mach-pxa/z2.c b/arch/arm/mach-pxa/z2.c
index 9b6ab07..3ab73f3 100644
--- a/arch/arm/mach-pxa/z2.c
+++ b/arch/arm/mach-pxa/z2.c
@@ -309,12 +309,12 @@ struct gpio_led z2_gpio_leds[] = {
 	.active_low		= 1,
 }, {
 	.name			= "z2:green:charged",
-	.default_trigger	= "none",
+	.default_trigger	= "mmc0",
 	.gpio			= GPIO85_ZIPITZ2_LED_CHARGED,
 	.active_low		= 1,
 }, {
 	.name			= "z2:amber:charging",
-	.default_trigger	= "none",
+	.default_trigger	= "Z2-charging-or-full",
 	.gpio			= GPIO83_ZIPITZ2_LED_CHARGING,
 	.active_low		= 1,
 },
-- 
cgit v0.10.2


From e3b1ceedf7adc4adfc989ee78a30fca7b62480b5 Mon Sep 17 00:00:00 2001
From: Vasily Khoruzhick <anarsoul@gmail.com>
Date: Sun, 13 Mar 2011 17:19:22 +0200
Subject: ARM: PXA: Z2: Use switch event for lid

Otherwise userspace might be confused.

Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Acked-by: Marek Vasut <marek.vasut@gmail.com>

diff --git a/arch/arm/mach-pxa/z2.c b/arch/arm/mach-pxa/z2.c
index 3ab73f3..d9322dd 100644
--- a/arch/arm/mach-pxa/z2.c
+++ b/arch/arm/mach-pxa/z2.c
@@ -436,12 +436,12 @@ static struct gpio_keys_button z2_pxa_buttons[] = {
 		.type		= EV_KEY,
 	},
 	{
-		.code		= KEY_CLOSE,
+		.code		= SW_LID,
 		.gpio		= GPIO98_ZIPITZ2_LID_BUTTON,
-		.active_low	= 0,
-		.desc		= "Lid Button",
-		.wakeup		= 0
-		.type		= EV_KEY,
+		.active_low	= 1,
+		.desc		= "Lid Switch",
+		.wakeup		= 0,
+		.type		= EV_SW,
 	},
 };
 
-- 
cgit v0.10.2


From 8aad172e6c54c74b1effe88ded2f308db3e1b658 Mon Sep 17 00:00:00 2001
From: Axel Lin <axel.lin@gmail.com>
Date: Mon, 7 Mar 2011 13:55:15 +0800
Subject: ARM: pxa/am200epd: fix leak in am200_init_gpio_regs error path

If gpio_request fails when i > 0, gpios[0] is not freed in current
implementation.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>

diff --git a/arch/arm/mach-pxa/am200epd.c b/arch/arm/mach-pxa/am200epd.c
index 10964e3..4cb069f 100644
--- a/arch/arm/mach-pxa/am200epd.c
+++ b/arch/arm/mach-pxa/am200epd.c
@@ -128,8 +128,8 @@ static int am200_init_gpio_regs(struct metronomefb_par *par)
 	return 0;
 
 err_req_gpio:
-	while (i > 0)
-		gpio_free(gpios[i--]);
+	while (--i >= 0)
+		gpio_free(gpios[i]);
 
 	return err;
 }
-- 
cgit v0.10.2


From 5898eb79fb45d4fd4ce22139c168de937bfaab38 Mon Sep 17 00:00:00 2001
From: Axel Lin <axel.lin@gmail.com>
Date: Mon, 7 Mar 2011 13:56:11 +0800
Subject: ARM: pxa/am300epd: fix leak in am300_init_gpio_regs error path

If gpio_request fails when i > 0, gpios[0] is not freed in current
implementation.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>

diff --git a/arch/arm/mach-pxa/am300epd.c b/arch/arm/mach-pxa/am300epd.c
index 993d75e..fa8bad2 100644
--- a/arch/arm/mach-pxa/am300epd.c
+++ b/arch/arm/mach-pxa/am300epd.c
@@ -125,10 +125,7 @@ static int am300_init_gpio_regs(struct broadsheetfb_par *par)
 		if (err) {
 			dev_err(&am300_device->dev, "failed requesting "
 				"gpio %d, err=%d\n", i, err);
-			while (i >= DB0_GPIO_PIN)
-				gpio_free(i--);
-			i = ARRAY_SIZE(gpios) - 1;
-			goto err_req_gpio;
+			goto err_req_gpio2;
 		}
 	}
 
@@ -159,9 +156,13 @@ static int am300_init_gpio_regs(struct broadsheetfb_par *par)
 
 	return 0;
 
+err_req_gpio2:
+	while (--i >= DB0_GPIO_PIN)
+		gpio_free(i);
+	i = ARRAY_SIZE(gpios);
 err_req_gpio:
-	while (i > 0)
-		gpio_free(gpios[i--]);
+	while (--i >= 0)
+		gpio_free(gpios[i]);
 
 	return err;
 }
-- 
cgit v0.10.2


From 7780c803bd103895a9c1c9a3c91db5b45c66e367 Mon Sep 17 00:00:00 2001
From: Robin Becker <replabrobin@gmail.com>
Date: Sat, 12 Mar 2011 15:32:45 +0000
Subject: arm: mach-kirkwood: add led in sheevaplug-setup.c

This patch adds a second, red, led for the standard sheevaplug.
The sheeva_esata mpp config is left unchanged.

Tested on a standard sheevaplug

Signed-off-by: Robin Becker <robin@reportlab.com>
Acked-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: Nicolas Pitre <nico@fluxnic.net>

diff --git a/arch/arm/mach-kirkwood/sheevaplug-setup.c b/arch/arm/mach-kirkwood/sheevaplug-setup.c
index 0a95063..17de0bf 100644
--- a/arch/arm/mach-kirkwood/sheevaplug-setup.c
+++ b/arch/arm/mach-kirkwood/sheevaplug-setup.c
@@ -58,6 +58,12 @@ static struct mvsdio_platform_data sheeva_esata_mvsdio_data = {
 
 static struct gpio_led sheevaplug_led_pins[] = {
 	{
+		.name			= "plug:red:misc",
+		.default_trigger	= "none",
+		.gpio			= 46,
+		.active_low		= 1,
+	},
+	{
 		.name			= "plug:green:health",
 		.default_trigger	= "default-on",
 		.gpio			= 49,
@@ -80,6 +86,7 @@ static struct platform_device sheevaplug_leds = {
 
 static unsigned int sheevaplug_mpp_config[] __initdata = {
 	MPP29_GPIO,	/* USB Power Enable */
+	MPP46_GPIO,	/* LED Red */
 	MPP49_GPIO,	/* LED */
 	0
 };
-- 
cgit v0.10.2


From a3b55791b5b2b4b6d31ece9b3975466ec2f07b1b Mon Sep 17 00:00:00 2001
From: Peter Ujfalusi <peter.ujfalusi@nokia.com>
Date: Fri, 18 Mar 2011 15:15:11 +0200
Subject: ASoC: tlv320dac33: Fix inconsistent spinlock usage

The lock is used within the interrupt handler.
Correct the spinlock usage, and use irqsave/irqrestore
flavour of spin_lock/unlock.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>

diff --git a/sound/soc/codecs/tlv320dac33.c b/sound/soc/codecs/tlv320dac33.c
index 71d7be8..93f38b1 100644
--- a/sound/soc/codecs/tlv320dac33.c
+++ b/sound/soc/codecs/tlv320dac33.c
@@ -670,6 +670,7 @@ static inline void dac33_prefill_handler(struct tlv320dac33_priv *dac33)
 {
 	struct snd_soc_codec *codec = dac33->codec;
 	unsigned int delay;
+	unsigned long flags;
 
 	switch (dac33->fifo_mode) {
 	case DAC33_FIFO_MODE1:
@@ -677,10 +678,10 @@ static inline void dac33_prefill_handler(struct tlv320dac33_priv *dac33)
 			DAC33_THRREG(dac33->nsample));
 
 		/* Take the timestamps */
-		spin_lock_irq(&dac33->lock);
+		spin_lock_irqsave(&dac33->lock, flags);
 		dac33->t_stamp2 = ktime_to_us(ktime_get());
 		dac33->t_stamp1 = dac33->t_stamp2;
-		spin_unlock_irq(&dac33->lock);
+		spin_unlock_irqrestore(&dac33->lock, flags);
 
 		dac33_write16(codec, DAC33_PREFILL_MSB,
 				DAC33_THRREG(dac33->alarm_threshold));
@@ -692,11 +693,11 @@ static inline void dac33_prefill_handler(struct tlv320dac33_priv *dac33)
 		break;
 	case DAC33_FIFO_MODE7:
 		/* Take the timestamp */
-		spin_lock_irq(&dac33->lock);
+		spin_lock_irqsave(&dac33->lock, flags);
 		dac33->t_stamp1 = ktime_to_us(ktime_get());
 		/* Move back the timestamp with drain time */
 		dac33->t_stamp1 -= dac33->mode7_us_to_lthr;
-		spin_unlock_irq(&dac33->lock);
+		spin_unlock_irqrestore(&dac33->lock, flags);
 
 		dac33_write16(codec, DAC33_PREFILL_MSB,
 				DAC33_THRREG(DAC33_MODE7_MARGIN));
@@ -714,13 +715,14 @@ static inline void dac33_prefill_handler(struct tlv320dac33_priv *dac33)
 static inline void dac33_playback_handler(struct tlv320dac33_priv *dac33)
 {
 	struct snd_soc_codec *codec = dac33->codec;
+	unsigned long flags;
 
 	switch (dac33->fifo_mode) {
 	case DAC33_FIFO_MODE1:
 		/* Take the timestamp */
-		spin_lock_irq(&dac33->lock);
+		spin_lock_irqsave(&dac33->lock, flags);
 		dac33->t_stamp2 = ktime_to_us(ktime_get());
-		spin_unlock_irq(&dac33->lock);
+		spin_unlock_irqrestore(&dac33->lock, flags);
 
 		dac33_write16(codec, DAC33_NSAMPLE_MSB,
 				DAC33_THRREG(dac33->nsample));
@@ -773,10 +775,11 @@ static irqreturn_t dac33_interrupt_handler(int irq, void *dev)
 {
 	struct snd_soc_codec *codec = dev;
 	struct tlv320dac33_priv *dac33 = snd_soc_codec_get_drvdata(codec);
+	unsigned long flags;
 
-	spin_lock(&dac33->lock);
+	spin_lock_irqsave(&dac33->lock, flags);
 	dac33->t_stamp1 = ktime_to_us(ktime_get());
-	spin_unlock(&dac33->lock);
+	spin_unlock_irqrestore(&dac33->lock, flags);
 
 	/* Do not schedule the workqueue in Mode7 */
 	if (dac33->fifo_mode != DAC33_FIFO_MODE7)
@@ -1173,15 +1176,16 @@ static snd_pcm_sframes_t dac33_dai_delay(
 	unsigned int time_delta, uthr;
 	int samples_out, samples_in, samples;
 	snd_pcm_sframes_t delay = 0;
+	unsigned long flags;
 
 	switch (dac33->fifo_mode) {
 	case DAC33_FIFO_BYPASS:
 		break;
 	case DAC33_FIFO_MODE1:
-		spin_lock(&dac33->lock);
+		spin_lock_irqsave(&dac33->lock, flags);
 		t0 = dac33->t_stamp1;
 		t1 = dac33->t_stamp2;
-		spin_unlock(&dac33->lock);
+		spin_unlock_irqrestore(&dac33->lock, flags);
 		t_now = ktime_to_us(ktime_get());
 
 		/* We have not started to fill the FIFO yet, delay is 0 */
@@ -1246,10 +1250,10 @@ static snd_pcm_sframes_t dac33_dai_delay(
 		}
 		break;
 	case DAC33_FIFO_MODE7:
-		spin_lock(&dac33->lock);
+		spin_lock_irqsave(&dac33->lock, flags);
 		t0 = dac33->t_stamp1;
 		uthr = dac33->uthr;
-		spin_unlock(&dac33->lock);
+		spin_unlock_irqrestore(&dac33->lock, flags);
 		t_now = ktime_to_us(ktime_get());
 
 		/* We have not started to fill the FIFO yet, delay is 0 */
-- 
cgit v0.10.2


From 76422dbf3ccdd46d925cdb0909445e4616b55187 Mon Sep 17 00:00:00 2001
From: Fabio Estevam <festevam@gmail.com>
Date: Thu, 17 Mar 2011 23:32:11 -0300
Subject: ARM: mx51: Print silicon revision on boot

Having the silicon revision to appear on the boot log is a useful information.

MX31 and MX35 already show the silicon revision on boot.

Add support for displaying such information for MX51 as well.

Tested on a MX51EVK, where it shows:

CPU identified as i.MX51, silicon rev 3.0

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

diff --git a/arch/arm/mach-mx5/clock-mx51-mx53.c b/arch/arm/mach-mx5/clock-mx51-mx53.c
index 652ace4..cc6ad1c 100644
--- a/arch/arm/mach-mx5/clock-mx51-mx53.c
+++ b/arch/arm/mach-mx5/clock-mx51-mx53.c
@@ -1511,6 +1511,7 @@ int __init mx51_clocks_init(unsigned long ckil, unsigned long osc,
 	clk_enable(&iim_clk);
 	mx51_revision();
 	clk_disable(&iim_clk);
+	mx51_display_revision();
 
 	/* move usb_phy_clk to 24MHz */
 	clk_set_parent(&usb_phy1_clk, &osc_clk);
diff --git a/arch/arm/mach-mx5/cpu.c b/arch/arm/mach-mx5/cpu.c
index df46b5e..3b4c307 100644
--- a/arch/arm/mach-mx5/cpu.c
+++ b/arch/arm/mach-mx5/cpu.c
@@ -51,6 +51,26 @@ int mx51_revision(void)
 }
 EXPORT_SYMBOL(mx51_revision);
 
+void mx51_display_revision(void)
+{
+	int rev;
+	char *srev;
+	rev = mx51_revision();
+
+	switch (rev) {
+	case IMX_CHIP_REVISION_2_0:
+		srev = IMX_CHIP_REVISION_2_0_STRING;
+		break;
+	case IMX_CHIP_REVISION_3_0:
+		srev = IMX_CHIP_REVISION_3_0_STRING;
+		break;
+	default:
+		srev = IMX_CHIP_REVISION_UNKNOWN_STRING;
+	}
+	printk(KERN_INFO "CPU identified as i.MX51, silicon rev %s\n", srev);
+}
+EXPORT_SYMBOL(mx51_display_revision);
+
 #ifdef CONFIG_NEON
 
 /*
diff --git a/arch/arm/plat-mxc/include/mach/mx51.h b/arch/arm/plat-mxc/include/mach/mx51.h
index 1eb339e..dede19a 100644
--- a/arch/arm/plat-mxc/include/mach/mx51.h
+++ b/arch/arm/plat-mxc/include/mach/mx51.h
@@ -347,6 +347,7 @@
 
 #if !defined(__ASSEMBLY__) && !defined(__MXC_BOOT_UNCOMPRESS)
 extern int mx51_revision(void);
+extern void mx51_display_revision(void);
 #endif
 
 /* tape-out 1 defines */
diff --git a/arch/arm/plat-mxc/include/mach/mxc.h b/arch/arm/plat-mxc/include/mach/mxc.h
index 7e07263..3322c7a 100644
--- a/arch/arm/plat-mxc/include/mach/mxc.h
+++ b/arch/arm/plat-mxc/include/mach/mxc.h
@@ -51,6 +51,20 @@
 #define IMX_CHIP_REVISION_3_3		0x33
 #define IMX_CHIP_REVISION_UNKNOWN	0xff
 
+#define IMX_CHIP_REVISION_1_0_STRING		"1.0"
+#define IMX_CHIP_REVISION_1_1_STRING		"1.1"
+#define IMX_CHIP_REVISION_1_2_STRING		"1.2"
+#define IMX_CHIP_REVISION_1_3_STRING		"1.3"
+#define IMX_CHIP_REVISION_2_0_STRING		"2.0"
+#define IMX_CHIP_REVISION_2_1_STRING		"2.1"
+#define IMX_CHIP_REVISION_2_2_STRING		"2.2"
+#define IMX_CHIP_REVISION_2_3_STRING		"2.3"
+#define IMX_CHIP_REVISION_3_0_STRING		"3.0"
+#define IMX_CHIP_REVISION_3_1_STRING		"3.1"
+#define IMX_CHIP_REVISION_3_2_STRING		"3.2"
+#define IMX_CHIP_REVISION_3_3_STRING		"3.3"
+#define IMX_CHIP_REVISION_UNKNOWN_STRING	"unknown"
+
 #ifndef __ASSEMBLY__
 extern unsigned int __mxc_cpu_type;
 #endif
-- 
cgit v0.10.2


From 14fb20c9d25be4ee115cafd7201d4833664ae59d Mon Sep 17 00:00:00 2001
From: Frank Li <Frank.Li@freescale.com>
Date: Tue, 15 Mar 2011 17:04:10 +0800
Subject: ARM: mx53_loco: Add GPIO Keypad support

Signed-off-by: Frank Li <Frank.Li@freescale.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

diff --git a/arch/arm/mach-mx5/Kconfig b/arch/arm/mach-mx5/Kconfig
index 83ee088..159340d 100644
--- a/arch/arm/mach-mx5/Kconfig
+++ b/arch/arm/mach-mx5/Kconfig
@@ -165,6 +165,7 @@ config MACH_MX53_LOCO
 	select IMX_HAVE_PLATFORM_IMX_I2C
 	select IMX_HAVE_PLATFORM_IMX_UART
 	select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
+	select IMX_HAVE_PLATFORM_GPIO_KEYS
 	help
 	  Include support for MX53 LOCO platform. This includes specific
 	  configurations for the board and its peripherals.
diff --git a/arch/arm/mach-mx5/board-mx53_loco.c b/arch/arm/mach-mx5/board-mx53_loco.c
index 0a18f8d..10a1bea 100644
--- a/arch/arm/mach-mx5/board-mx53_loco.c
+++ b/arch/arm/mach-mx5/board-mx53_loco.c
@@ -36,6 +36,9 @@
 #include "crm_regs.h"
 #include "devices-imx53.h"
 
+#define MX53_LOCO_POWER			IMX_GPIO_NR(1, 8)
+#define MX53_LOCO_UI1			IMX_GPIO_NR(2, 14)
+#define MX53_LOCO_UI2			IMX_GPIO_NR(2, 15)
 #define LOCO_FEC_PHY_RST		IMX_GPIO_NR(7, 6)
 
 static iomux_v3_cfg_t mx53_loco_pads[] = {
@@ -180,6 +183,27 @@ static iomux_v3_cfg_t mx53_loco_pads[] = {
 	MX53_PAD_GPIO_8__GPIO1_8,
 };
 
+#define GPIO_BUTTON(gpio_num, ev_code, act_low, descr, wake)	\
+{								\
+	.gpio		= gpio_num,				\
+	.type		= EV_KEY,				\
+	.code		= ev_code,				\
+	.active_low	= act_low,				\
+	.desc		= "btn " descr,				\
+	.wakeup		= wake,					\
+}
+
+static const struct gpio_keys_button loco_buttons[] __initconst = {
+	GPIO_BUTTON(MX53_LOCO_POWER, KEY_POWER, 1, "power", 0),
+	GPIO_BUTTON(MX53_LOCO_UI1, KEY_VOLUMEUP, 1, "volume-up", 0),
+	GPIO_BUTTON(MX53_LOCO_UI2, KEY_VOLUMEDOWN, 1, "volume-down", 0),
+};
+
+static const struct gpio_keys_platform_data loco_button_data __initconst = {
+	.buttons        = loco_buttons,
+	.nbuttons       = ARRAY_SIZE(loco_buttons),
+};
+
 static inline void mx53_loco_fec_reset(void)
 {
 	int ret;
@@ -215,6 +239,7 @@ static void __init mx53_loco_board_init(void)
 	imx53_add_imx_i2c(1, &mx53_loco_i2c_data);
 	imx53_add_sdhci_esdhc_imx(0, NULL);
 	imx53_add_sdhci_esdhc_imx(2, NULL);
+	imx_add_gpio_keys(&loco_button_data);
 }
 
 static void __init mx53_loco_timer_init(void)
-- 
cgit v0.10.2


From ce191e415cd0c6d5240caf5c6827500842868da2 Mon Sep 17 00:00:00 2001
From: Fabio Estevam <festevam@gmail.com>
Date: Wed, 16 Mar 2011 22:52:31 -0300
Subject: ARM: mx5/babbage: Use gpio_request_one in babbage_fec_reset
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Current code inside babbage_fec_reset uses gpio_direction_output with initial value of the GPIO and also sets
the GPIO value via gpio_set_value to the same level right after. This is not needed.

By using gpio_request_one it is possible to set the direction and initial value in one shot.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

diff --git a/arch/arm/mach-mx5/board-mx51_babbage.c b/arch/arm/mach-mx5/board-mx51_babbage.c
index b2ecd19..bea4e41 100644
--- a/arch/arm/mach-mx5/board-mx51_babbage.c
+++ b/arch/arm/mach-mx5/board-mx51_babbage.c
@@ -228,13 +228,12 @@ static inline void babbage_fec_reset(void)
 	int ret;
 
 	/* reset FEC PHY */
-	ret = gpio_request(BABBAGE_FEC_PHY_RESET, "fec-phy-reset");
+	ret = gpio_request_one(BABBAGE_FEC_PHY_RESET,
+					GPIOF_OUT_INIT_LOW, "fec-phy-reset");
 	if (ret) {
 		printk(KERN_ERR"failed to get GPIO_FEC_PHY_RESET: %d\n", ret);
 		return;
 	}
-	gpio_direction_output(BABBAGE_FEC_PHY_RESET, 0);
-	gpio_set_value(BABBAGE_FEC_PHY_RESET, 0);
 	msleep(1);
 	gpio_set_value(BABBAGE_FEC_PHY_RESET, 1);
 }
-- 
cgit v0.10.2


From 6ea6392cc4ff9214c7356e8ca71244c006a95ddb Mon Sep 17 00:00:00 2001
From: Fabio Estevam <festevam@gmail.com>
Date: Wed, 16 Mar 2011 22:52:33 -0300
Subject: ARM: mx5/mx53_evk: Use gpio_request_one in mx53_evk_fec_reset
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Current code inside mx53_evk_fec_reset uses gpio_direction_output with initial value of the GPIO and also sets
the GPIO value via gpio_set_value right after. This is not needed.

By using gpio_request_one it is possible to set the direction and initial value in one shot.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

diff --git a/arch/arm/mach-mx5/board-mx53_evk.c b/arch/arm/mach-mx5/board-mx53_evk.c
index 7b5735c..d771999 100644
--- a/arch/arm/mach-mx5/board-mx53_evk.c
+++ b/arch/arm/mach-mx5/board-mx53_evk.c
@@ -82,13 +82,12 @@ static inline void mx53_evk_fec_reset(void)
 	int ret;
 
 	/* reset FEC PHY */
-	ret = gpio_request(SMD_FEC_PHY_RST, "fec-phy-reset");
+	ret = gpio_request_one(SMD_FEC_PHY_RST, GPIOF_OUT_INIT_LOW,
+							"fec-phy-reset");
 	if (ret) {
 		printk(KERN_ERR"failed to get GPIO_FEC_PHY_RESET: %d\n", ret);
 		return;
 	}
-	gpio_direction_output(SMD_FEC_PHY_RST, 0);
-	gpio_set_value(SMD_FEC_PHY_RST, 0);
 	msleep(1);
 	gpio_set_value(SMD_FEC_PHY_RST, 1);
 }
-- 
cgit v0.10.2


From 350ac9ddce074855030b88c9e8c016574d2e9097 Mon Sep 17 00:00:00 2001
From: Fabio Estevam <festevam@gmail.com>
Date: Wed, 16 Mar 2011 22:52:34 -0300
Subject: ARM: mx5/mx53_evk: Make the reset pin name more meaningful
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

As there is a mx53_smd board in the kernel, using SMD_FEC_PHY_RST as the pin name can be misleading when used
on a MX53_EVK board.

Change the pin name to reflect the board name.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

diff --git a/arch/arm/mach-mx5/board-mx53_evk.c b/arch/arm/mach-mx5/board-mx53_evk.c
index d771999..2af3f43 100644
--- a/arch/arm/mach-mx5/board-mx53_evk.c
+++ b/arch/arm/mach-mx5/board-mx53_evk.c
@@ -34,7 +34,7 @@
 #include <mach/imx-uart.h>
 #include <mach/iomux-mx53.h>
 
-#define SMD_FEC_PHY_RST		IMX_GPIO_NR(7, 6)
+#define MX53_EVK_FEC_PHY_RST	IMX_GPIO_NR(7, 6)
 #define EVK_ECSPI1_CS0		IMX_GPIO_NR(2, 30)
 #define EVK_ECSPI1_CS1		IMX_GPIO_NR(3, 19)
 
@@ -82,14 +82,14 @@ static inline void mx53_evk_fec_reset(void)
 	int ret;
 
 	/* reset FEC PHY */
-	ret = gpio_request_one(SMD_FEC_PHY_RST, GPIOF_OUT_INIT_LOW,
+	ret = gpio_request_one(MX53_EVK_FEC_PHY_RST, GPIOF_OUT_INIT_LOW,
 							"fec-phy-reset");
 	if (ret) {
 		printk(KERN_ERR"failed to get GPIO_FEC_PHY_RESET: %d\n", ret);
 		return;
 	}
 	msleep(1);
-	gpio_set_value(SMD_FEC_PHY_RST, 1);
+	gpio_set_value(MX53_EVK_FEC_PHY_RST, 1);
 }
 
 static struct fec_platform_data mx53_evk_fec_pdata = {
-- 
cgit v0.10.2


From 93b20e4fdbe1ddc4bef79d968cb1ba453324a499 Mon Sep 17 00:00:00 2001
From: Jan Weitzel <j.weitzel@phytec.de>
Date: Thu, 17 Mar 2011 13:44:29 +0100
Subject: ARM: mxc: Add dummy_get_cycles to avoid access before init is done

this is needed to use get_cycles with sched_clock. Accessing timer
without enabled clk will result in crash

Signed-off-by: Jan Weitzel <j.weitzel@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

diff --git a/arch/arm/plat-mxc/time.c b/arch/arm/plat-mxc/time.c
index 9f0c261..0142e4b 100644
--- a/arch/arm/plat-mxc/time.c
+++ b/arch/arm/plat-mxc/time.c
@@ -105,6 +105,11 @@ static void gpt_irq_acknowledge(void)
 		__raw_writel(V2_TSTAT_OF1, timer_base + V2_TSTAT);
 }
 
+static cycle_t dummy_get_cycles(struct clocksource *cs)
+{
+	return 0;
+}
+
 static cycle_t mx1_2_get_cycles(struct clocksource *cs)
 {
 	return __raw_readl(timer_base + MX1_2_TCN);
@@ -118,7 +123,7 @@ static cycle_t v2_get_cycles(struct clocksource *cs)
 static struct clocksource clocksource_mxc = {
 	.name 		= "mxc_timer1",
 	.rating		= 200,
-	.read		= mx1_2_get_cycles,
+	.read		= dummy_get_cycles,
 	.mask		= CLOCKSOURCE_MASK(32),
 	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
 };
@@ -129,6 +134,8 @@ static int __init mxc_clocksource_init(struct clk *timer_clk)
 
 	if (timer_is_v2())
 		clocksource_mxc.read = v2_get_cycles;
+	else
+		clocksource_mxc.read = mx1_2_get_cycles;
 
 	clocksource_register_hz(&clocksource_mxc, c);
 
-- 
cgit v0.10.2


From c124befc0d1981f5f3e438d06313fa8270a9edb6 Mon Sep 17 00:00:00 2001
From: Jan Weitzel <j.weitzel@phytec.de>
Date: Thu, 17 Mar 2011 13:44:30 +0100
Subject: ARM: mxc: Add sched_clock to mxc platform

Add sched_clock using cyc_to_sched_clock and update_sched_clock
with HAVE_SCHED_CLOCK
tested on iMX27 and iMX35

Signed-off-by: Jan Weitzel <j.weitzel@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 599e163..f4027ab 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -362,6 +362,7 @@ config ARCH_MXC
 	select GENERIC_CLOCKEVENTS
 	select ARCH_REQUIRE_GPIOLIB
 	select CLKDEV_LOOKUP
+	select HAVE_SCHED_CLOCK
 	help
 	  Support for Freescale MXC/iMX-based family of processors
 
diff --git a/arch/arm/plat-mxc/time.c b/arch/arm/plat-mxc/time.c
index 0142e4b..2237ff8 100644
--- a/arch/arm/plat-mxc/time.c
+++ b/arch/arm/plat-mxc/time.c
@@ -27,6 +27,7 @@
 #include <linux/clk.h>
 
 #include <mach/hardware.h>
+#include <asm/sched_clock.h>
 #include <asm/mach/time.h>
 #include <mach/common.h>
 
@@ -128,6 +129,20 @@ static struct clocksource clocksource_mxc = {
 	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
 };
 
+static DEFINE_CLOCK_DATA(cd);
+unsigned long long notrace sched_clock(void)
+{
+	cycle_t cyc = clocksource_mxc.read(&clocksource_mxc);
+
+	return cyc_to_sched_clock(&cd, cyc, (u32)~0);
+}
+
+static void notrace mxc_update_sched_clock(void)
+{
+	cycle_t cyc = clocksource_mxc.read(&clocksource_mxc);
+	update_sched_clock(&cd, cyc, (u32)~0);
+}
+
 static int __init mxc_clocksource_init(struct clk *timer_clk)
 {
 	unsigned int c = clk_get_rate(timer_clk);
@@ -137,6 +152,7 @@ static int __init mxc_clocksource_init(struct clk *timer_clk)
 	else
 		clocksource_mxc.read = mx1_2_get_cycles;
 
+	init_sched_clock(&cd, mxc_update_sched_clock, 32, c);
 	clocksource_register_hz(&clocksource_mxc, c);
 
 	return 0;
-- 
cgit v0.10.2


From 0ff2593bf6c06cd99f5414295ecb31bc629b3d15 Mon Sep 17 00:00:00 2001
From: Julien Boibessot <julien.boibessot@armadeus.com>
Date: Fri, 18 Mar 2011 09:31:46 +0100
Subject: MX51: Add AUDMUX ports definitions

Signed-off-by: Julien Boibessot <julien.boibessot@armadeus.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

diff --git a/arch/arm/plat-mxc/include/mach/audmux.h b/arch/arm/plat-mxc/include/mach/audmux.h
index 5cd6466..6fda788 100644
--- a/arch/arm/plat-mxc/include/mach/audmux.h
+++ b/arch/arm/plat-mxc/include/mach/audmux.h
@@ -15,6 +15,14 @@
 #define MX31_AUDMUX_PORT5_SSI_PINS_5	4
 #define MX31_AUDMUX_PORT6_SSI_PINS_6	5
 
+#define MX51_AUDMUX_PORT1_SSI0		0
+#define MX51_AUDMUX_PORT2_SSI1		1
+#define MX51_AUDMUX_PORT3		2
+#define MX51_AUDMUX_PORT4		3
+#define MX51_AUDMUX_PORT5		4
+#define MX51_AUDMUX_PORT6		5
+#define MX51_AUDMUX_PORT7		6
+
 /* Register definitions for the i.MX21/27 Digital Audio Multiplexer */
 #define MXC_AUDMUX_V1_PCR_INMMASK(x)	((x) & 0xff)
 #define MXC_AUDMUX_V1_PCR_INMEN		(1 << 8)
@@ -28,7 +36,7 @@
 #define MXC_AUDMUX_V1_PCR_TCLKDIR	(1 << 30)
 #define MXC_AUDMUX_V1_PCR_TFSDIR	(1 << 31)
 
-/* Register definitions for the i.MX25/31/35 Digital Audio Multiplexer */
+/* Register definitions for the i.MX25/31/35/51 Digital Audio Multiplexer */
 #define MXC_AUDMUX_V2_PTCR_TFSDIR	(1 << 31)
 #define MXC_AUDMUX_V2_PTCR_TFSEL(x)	(((x) & 0xf) << 27)
 #define MXC_AUDMUX_V2_PTCR_TCLKDIR	(1 << 26)
-- 
cgit v0.10.2


From 5658bff6c2c4a07fb25195eac70205934b8f5a0d Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Uwe=20Kleine-K=C3=B6nig?= <u.kleine-koenig@pengutronix.de>
Date: Fri, 18 Mar 2011 12:24:08 +0100
Subject: ARM: imx: let MACH_IMX27_VISSTRIM_M10 select
 IMX_HAVE_PLATFORM_IMX_SSI
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

mach-imx27_visstrim_m10.c uses imx27_add_imx_ssi() so it needs to select
IMX_HAVE_PLATFORM_IMX_SSI to fix:

	arch/arm/mach-imx/built-in.o: In function `visstrim_m10_board_init':
	mach-imx27_visstrim_m10.c:(.init.text+0x308): undefined reference to `imx_add_imx_ssi'
	mach-imx27_visstrim_m10.c:(.init.text+0x394): undefined reference to `imx27_imx_ssi_data'

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
index 5eec099..56b930a 100644
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@@ -255,6 +255,7 @@ config MACH_IMX27_VISSTRIM_M10
 	bool "Vista Silicon i.MX27 Visstrim_m10"
 	select SOC_IMX27
 	select IMX_HAVE_PLATFORM_IMX_I2C
+	select IMX_HAVE_PLATFORM_IMX_SSI
 	select IMX_HAVE_PLATFORM_IMX_UART
 	select IMX_HAVE_PLATFORM_MXC_MMC
 	select IMX_HAVE_PLATFORM_MXC_EHCI
-- 
cgit v0.10.2


From 65047a0f695ed975855e9b83bb922ecb1ff250ab Mon Sep 17 00:00:00 2001
From: Huang Weiyi <weiyi.huang@gmail.com>
Date: Fri, 18 Mar 2011 22:05:55 +0800
Subject: ARM i.MX: remove duplicated #include

Remove duplicated #include('s) in
  arch/arm/mach-mx5/mx51_efika.c

Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

diff --git a/arch/arm/mach-mx5/mx51_efika.c b/arch/arm/mach-mx5/mx51_efika.c
index 51a67fc..07aea9c 100644
--- a/arch/arm/mach-mx5/mx51_efika.c
+++ b/arch/arm/mach-mx5/mx51_efika.c
@@ -42,7 +42,6 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/time.h>
-#include <asm/mach-types.h>
 
 #include "devices-imx51.h"
 #include "devices.h"
-- 
cgit v0.10.2


From 5d18724588a4f632e836357a43b33bf4b538af82 Mon Sep 17 00:00:00 2001
From: Shawn Guo <shawn.guo@linaro.org>
Date: Sun, 20 Mar 2011 11:17:59 +0800
Subject: ARM: mxc: fix buggy '.end' of IORESOURCE_MEM in device codes
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Acked-by: Wolfram Sang <w.sang@pengutronix.de>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

diff --git a/arch/arm/plat-mxc/devices/platform-fec.c b/arch/arm/plat-mxc/devices/platform-fec.c
index 6561c9d..ccc789e 100644
--- a/arch/arm/plat-mxc/devices/platform-fec.c
+++ b/arch/arm/plat-mxc/devices/platform-fec.c
@@ -53,7 +53,7 @@ struct platform_device *__init imx_add_fec(
 	struct resource res[] = {
 		{
 			.start = data->iobase,
-			.end = data->iobase + SZ_4K,
+			.end = data->iobase + SZ_4K - 1,
 			.flags = IORESOURCE_MEM,
 		}, {
 			.start = data->irq,
diff --git a/arch/arm/plat-mxc/devices/platform-imxdi_rtc.c b/arch/arm/plat-mxc/devices/platform-imxdi_rtc.c
index 10653cc..805336f 100644
--- a/arch/arm/plat-mxc/devices/platform-imxdi_rtc.c
+++ b/arch/arm/plat-mxc/devices/platform-imxdi_rtc.c
@@ -27,7 +27,7 @@ struct platform_device *__init imx_add_imxdi_rtc(
 	struct resource res[] = {
 		{
 			.start = data->iobase,
-			.end = data->iobase + SZ_16K,
+			.end = data->iobase + SZ_16K - 1,
 			.flags = IORESOURCE_MEM,
 		}, {
 			.start = data->irq,
-- 
cgit v0.10.2


From 021ebc2da02a7f3107a8f31d8a0ebfbe4175429e Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Lothar=20Wa=C3=9Fmann?= <LW@KARO-electronics.de>
Date: Mon, 21 Mar 2011 17:48:05 +0100
Subject: ARM: mxs: configure and register the second FEC device on
 TX28/STK5-V4
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

diff --git a/arch/arm/mach-mxs/module-tx28.c b/arch/arm/mach-mxs/module-tx28.c
index fa0b154..0fcff47 100644
--- a/arch/arm/mach-mxs/module-tx28.c
+++ b/arch/arm/mach-mxs/module-tx28.c
@@ -45,7 +45,7 @@ static const iomux_cfg_t tx28_fec_gpio_pads[] __initconst = {
 };
 
 #define FEC_MODE (MXS_PAD_8MA | MXS_PAD_PULLUP | MXS_PAD_3V3)
-static const iomux_cfg_t tx28_fec_pads[] __initconst = {
+static const iomux_cfg_t tx28_fec0_pads[] __initconst = {
 	MX28_PAD_ENET0_MDC__ENET0_MDC | FEC_MODE,
 	MX28_PAD_ENET0_MDIO__ENET0_MDIO | FEC_MODE,
 	MX28_PAD_ENET0_RX_EN__ENET0_RX_EN | FEC_MODE,
@@ -57,7 +57,20 @@ static const iomux_cfg_t tx28_fec_pads[] __initconst = {
 	MX28_PAD_ENET_CLK__CLKCTRL_ENET | FEC_MODE,
 };
 
-static const struct fec_platform_data tx28_fec_data __initconst = {
+static const iomux_cfg_t tx28_fec1_pads[] __initconst = {
+	MX28_PAD_ENET0_RXD2__ENET1_RXD0,
+	MX28_PAD_ENET0_RXD3__ENET1_RXD1,
+	MX28_PAD_ENET0_TXD2__ENET1_TXD0,
+	MX28_PAD_ENET0_TXD3__ENET1_TXD1,
+	MX28_PAD_ENET0_COL__ENET1_TX_EN,
+	MX28_PAD_ENET0_CRS__ENET1_RX_EN,
+};
+
+static struct fec_platform_data tx28_fec0_data = {
+	.phy = PHY_INTERFACE_MODE_RMII,
+};
+
+static struct fec_platform_data tx28_fec1_data = {
 	.phy = PHY_INTERFACE_MODE_RMII,
 };
 
@@ -108,15 +121,15 @@ int __init tx28_add_fec0(void)
 	pr_debug("%s: Deasserting FEC PHY RESET\n", __func__);
 	gpio_set_value(TX28_FEC_PHY_RESET, 1);
 
-	ret = mxs_iomux_setup_multiple_pads(tx28_fec_pads,
-			ARRAY_SIZE(tx28_fec_pads));
+	ret = mxs_iomux_setup_multiple_pads(tx28_fec0_pads,
+			ARRAY_SIZE(tx28_fec0_pads));
 	if (ret) {
 		pr_debug("%s: mxs_iomux_setup_multiple_pads() failed with rc: %d\n",
 				__func__, ret);
 		goto free_gpios;
 	}
-	pr_debug("%s: Registering FEC device\n", __func__);
-	mx28_add_fec(0, &tx28_fec_data);
+	pr_debug("%s: Registering FEC0 device\n", __func__);
+	mx28_add_fec(0, &tx28_fec0_data);
 	return 0;
 
 free_gpios:
@@ -129,3 +142,19 @@ free_gpios:
 
 	return ret;
 }
+
+int __init tx28_add_fec1(void)
+{
+	int ret;
+
+	ret = mxs_iomux_setup_multiple_pads(tx28_fec1_pads,
+			ARRAY_SIZE(tx28_fec1_pads));
+	if (ret) {
+		pr_debug("%s: mxs_iomux_setup_multiple_pads() failed with rc: %d\n",
+				__func__, ret);
+		return ret;
+	}
+	pr_debug("%s: Registering FEC1 device\n", __func__);
+	mx28_add_fec(1, &tx28_fec1_data);
+	return 0;
+}
diff --git a/arch/arm/mach-mxs/module-tx28.h b/arch/arm/mach-mxs/module-tx28.h
index df9e1b6..8ed4254 100644
--- a/arch/arm/mach-mxs/module-tx28.h
+++ b/arch/arm/mach-mxs/module-tx28.h
@@ -7,3 +7,4 @@
  * Free Software Foundation.
  */
 int __init tx28_add_fec0(void);
+int __init tx28_add_fec1(void);
-- 
cgit v0.10.2


From 16f246e69b8857c6a2993f1b6663e92d4d4e5395 Mon Sep 17 00:00:00 2001
From: Dinh Nguyen <Dinh.Nguyen@freescale.com>
Date: Mon, 21 Mar 2011 16:30:35 -0500
Subject: ARM: mx50: Add support to get the silicon revision

For MX50, the HW_ADADIG_DIGPROG register in the ANATOP module will
have the correct silicon revision:

Major       Minor   Description
0x50        0x0     TO1.0
0x50        0x1     TO1.1

Signed-off-by: Dinh Nguyen <Dinh.Nguyen@freescale.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

diff --git a/arch/arm/mach-mx5/cpu.c b/arch/arm/mach-mx5/cpu.c
index 3b4c307..472bdfa 100644
--- a/arch/arm/mach-mx5/cpu.c
+++ b/arch/arm/mach-mx5/cpu.c
@@ -21,6 +21,7 @@
 static int cpu_silicon_rev = -1;
 
 #define IIM_SREV 0x24
+#define MX50_HW_ADADIG_DIGPROG	0xB0
 
 static int get_mx51_srev(void)
 {
@@ -127,6 +128,44 @@ int mx53_revision(void)
 }
 EXPORT_SYMBOL(mx53_revision);
 
+static int get_mx50_srev(void)
+{
+	void __iomem *anatop = ioremap(MX50_ANATOP_BASE_ADDR, SZ_8K);
+	u32 rev;
+
+	if (!anatop) {
+		cpu_silicon_rev = -EINVAL;
+		return 0;
+	}
+
+	rev = readl(anatop + MX50_HW_ADADIG_DIGPROG);
+	rev &= 0xff;
+
+	iounmap(anatop);
+	if (rev == 0x0)
+		return IMX_CHIP_REVISION_1_0;
+	else if (rev == 0x1)
+		return IMX_CHIP_REVISION_1_1;
+	return 0;
+}
+
+/*
+ * Returns:
+ *	the silicon revision of the cpu
+ *	-EINVAL - not a mx50
+ */
+int mx50_revision(void)
+{
+	if (!cpu_is_mx50())
+		return -EINVAL;
+
+	if (cpu_silicon_rev == -1)
+		cpu_silicon_rev = get_mx50_srev();
+
+	return cpu_silicon_rev;
+}
+EXPORT_SYMBOL(mx50_revision);
+
 static int __init post_cpu_init(void)
 {
 	unsigned int reg;
diff --git a/arch/arm/plat-mxc/include/mach/mx50.h b/arch/arm/plat-mxc/include/mach/mx50.h
index aaec2a6..5f2da75a 100644
--- a/arch/arm/plat-mxc/include/mach/mx50.h
+++ b/arch/arm/plat-mxc/include/mach/mx50.h
@@ -282,4 +282,8 @@
 #define MX50_INT_APBHDMA_CHAN6	116
 #define MX50_INT_APBHDMA_CHAN7	117
 
+#if !defined(__ASSEMBLY__) && !defined(__MXC_BOOT_UNCOMPRESS)
+extern int mx50_revision(void);
+#endif
+
 #endif /* ifndef __MACH_MX50_H__ */
-- 
cgit v0.10.2


From b6e89b21824cc37ab19e0209a7754c74d237a123 Mon Sep 17 00:00:00 2001
From: Dinh Nguyen <Dinh.Nguyen@freescale.com>
Date: Mon, 21 Mar 2011 16:30:36 -0500
Subject: ARM: mx51: Add entry for gpc_dvfs_clk

For MX51 SRPG, we need to turn on the GPC clock in order to set the
SRPG registers.

Signed-off-by: Dinh Nguyen <Dinh.Nguyen@freescale.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

diff --git a/arch/arm/mach-mx5/clock-mx51-mx53.c b/arch/arm/mach-mx5/clock-mx51-mx53.c
index cc6ad1c..fdbc05e 100644
--- a/arch/arm/mach-mx5/clock-mx51-mx53.c
+++ b/arch/arm/mach-mx5/clock-mx51-mx53.c
@@ -865,6 +865,13 @@ static struct clk aips_tz2_clk = {
 	.disable = _clk_ccgr_disable_inwait,
 };
 
+static struct clk gpc_dvfs_clk = {
+	.enable_reg = MXC_CCM_CCGR5,
+	.enable_shift = MXC_CCM_CCGRx_CG12_OFFSET,
+	.enable = _clk_ccgr_enable,
+	.disable = _clk_ccgr_disable,
+};
+
 static struct clk gpt_32k_clk = {
 	.id = 0,
 	.parent = &ckil_clk,
@@ -1448,6 +1455,7 @@ static struct clk_lookup mx51_lookups[] = {
 	_REGISTER_CLOCK("imx-ipuv3", NULL, ipu_clk)
 	_REGISTER_CLOCK("imx-ipuv3", "di0", ipu_di0_clk)
 	_REGISTER_CLOCK("imx-ipuv3", "di1", ipu_di1_clk)
+	_REGISTER_CLOCK(NULL, "gpc_dvfs", gpc_dvfs_clk)
 };
 
 static struct clk_lookup mx53_lookups[] = {
-- 
cgit v0.10.2


From 0adf882b6894cd150392400e9642787cf691016a Mon Sep 17 00:00:00 2001
From: Dinh Nguyen <Dinh.Nguyen@freescale.com>
Date: Mon, 21 Mar 2011 16:30:37 -0500
Subject: ARM: mx51: Implement code to allow mx51 to enter WFI

Implement code for MX51 that allows the SoC to enter WFI when
arch_idle is called.

This patch is also necessary for correctly suspending the system.

Signed-off-by: Dinh Nguyen <Dinh.Nguyen@freescale.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

diff --git a/arch/arm/mach-mx5/Makefile b/arch/arm/mach-mx5/Makefile
index 4f63048..0b9338c 100644
--- a/arch/arm/mach-mx5/Makefile
+++ b/arch/arm/mach-mx5/Makefile
@@ -3,7 +3,7 @@
 #
 
 # Object file lists.
-obj-y   := cpu.o mm.o clock-mx51-mx53.o devices.o ehci.o
+obj-y   := cpu.o mm.o clock-mx51-mx53.o devices.o ehci.o system.o
 obj-$(CONFIG_SOC_IMX50) += mm-mx50.o
 
 obj-$(CONFIG_CPU_FREQ_IMX)    += cpu_op-mx51.o
diff --git a/arch/arm/mach-mx5/system.c b/arch/arm/mach-mx5/system.c
new file mode 100644
index 0000000..76ae8dc
--- /dev/null
+++ b/arch/arm/mach-mx5/system.c
@@ -0,0 +1,84 @@
+/*
+ * Copyright (C) 2011 Freescale Semiconductor, Inc. All Rights Reserved.
+ */
+
+/*
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <mach/hardware.h>
+#include "crm_regs.h"
+
+/* set cpu low power mode before WFI instruction. This function is called
+  * mx5 because it can be used for mx50, mx51, and mx53.*/
+void mx5_cpu_lp_set(enum mxc_cpu_pwr_mode mode)
+{
+	u32 plat_lpc, arm_srpgcr, ccm_clpcr;
+	u32 empgc0, empgc1;
+	int stop_mode = 0;
+
+	/* always allow platform to issue a deep sleep mode request */
+	plat_lpc = __raw_readl(MXC_CORTEXA8_PLAT_LPC) &
+	    ~(MXC_CORTEXA8_PLAT_LPC_DSM);
+	ccm_clpcr = __raw_readl(MXC_CCM_CLPCR) & ~(MXC_CCM_CLPCR_LPM_MASK);
+	arm_srpgcr = __raw_readl(MXC_SRPG_ARM_SRPGCR) & ~(MXC_SRPGCR_PCR);
+	empgc0 = __raw_readl(MXC_SRPG_EMPGC0_SRPGCR) & ~(MXC_SRPGCR_PCR);
+	empgc1 = __raw_readl(MXC_SRPG_EMPGC1_SRPGCR) & ~(MXC_SRPGCR_PCR);
+
+	switch (mode) {
+	case WAIT_CLOCKED:
+		break;
+	case WAIT_UNCLOCKED:
+		ccm_clpcr |= 0x1 << MXC_CCM_CLPCR_LPM_OFFSET;
+		break;
+	case WAIT_UNCLOCKED_POWER_OFF:
+	case STOP_POWER_OFF:
+		plat_lpc |= MXC_CORTEXA8_PLAT_LPC_DSM
+			    | MXC_CORTEXA8_PLAT_LPC_DBG_DSM;
+		if (mode == WAIT_UNCLOCKED_POWER_OFF) {
+			ccm_clpcr |= 0x1 << MXC_CCM_CLPCR_LPM_OFFSET;
+			ccm_clpcr &= ~MXC_CCM_CLPCR_VSTBY;
+			ccm_clpcr &= ~MXC_CCM_CLPCR_SBYOS;
+			stop_mode = 0;
+		} else {
+			ccm_clpcr |= 0x2 << MXC_CCM_CLPCR_LPM_OFFSET;
+			ccm_clpcr |= 0x3 << MXC_CCM_CLPCR_STBY_COUNT_OFFSET;
+			ccm_clpcr |= MXC_CCM_CLPCR_VSTBY;
+			ccm_clpcr |= MXC_CCM_CLPCR_SBYOS;
+			stop_mode = 1;
+		}
+		arm_srpgcr |= MXC_SRPGCR_PCR;
+
+		if (tzic_enable_wake(1) != 0)
+			return;
+		break;
+	case STOP_POWER_ON:
+		ccm_clpcr |= 0x2 << MXC_CCM_CLPCR_LPM_OFFSET;
+		break;
+	default:
+		printk(KERN_WARNING "UNKNOWN cpu power mode: %d\n", mode);
+		return;
+	}
+
+	__raw_writel(plat_lpc, MXC_CORTEXA8_PLAT_LPC);
+	__raw_writel(ccm_clpcr, MXC_CCM_CLPCR);
+	__raw_writel(arm_srpgcr, MXC_SRPG_ARM_SRPGCR);
+
+	/* Enable NEON SRPG for all but MX50TO1.0. */
+	if (mx50_revision() != IMX_CHIP_REVISION_1_0)
+		__raw_writel(arm_srpgcr, MXC_SRPG_NEON_SRPGCR);
+
+	if (stop_mode) {
+		empgc0 |= MXC_SRPGCR_PCR;
+		empgc1 |= MXC_SRPGCR_PCR;
+
+		__raw_writel(empgc0, MXC_SRPG_EMPGC0_SRPGCR);
+		__raw_writel(empgc1, MXC_SRPG_EMPGC1_SRPGCR);
+	}
+}
diff --git a/arch/arm/plat-mxc/include/mach/mxc.h b/arch/arm/plat-mxc/include/mach/mxc.h
index 3322c7a..1aea818 100644
--- a/arch/arm/plat-mxc/include/mach/mxc.h
+++ b/arch/arm/plat-mxc/include/mach/mxc.h
@@ -195,6 +195,15 @@ struct cpu_op {
 	u32 cpu_rate;
 };
 
+int tzic_enable_wake(int is_idle);
+enum mxc_cpu_pwr_mode {
+	WAIT_CLOCKED,		/* wfi only */
+	WAIT_UNCLOCKED,		/* WAIT */
+	WAIT_UNCLOCKED_POWER_OFF,	/* WAIT + SRPG */
+	STOP_POWER_ON,		/* just STOP */
+	STOP_POWER_OFF,		/* STOP + SRPG */
+};
+
 extern struct cpu_op *(*get_cpu_op)(int *op);
 #endif
 
diff --git a/arch/arm/plat-mxc/include/mach/system.h b/arch/arm/plat-mxc/include/mach/system.h
index 95be51b..0417da9 100644
--- a/arch/arm/plat-mxc/include/mach/system.h
+++ b/arch/arm/plat-mxc/include/mach/system.h
@@ -20,6 +20,8 @@
 #include <mach/hardware.h>
 #include <mach/common.h>
 
+extern void mx5_cpu_lp_set(enum mxc_cpu_pwr_mode mode);
+
 static inline void arch_idle(void)
 {
 #ifdef CONFIG_ARCH_MXC91231
@@ -54,7 +56,9 @@ static inline void arch_idle(void)
 			"orr %0, %0, #0x00000004\n"
 			"mcr p15, 0, %0, c1, c0, 0\n"
 			: "=r" (reg));
-	} else
+	} else if (cpu_is_mx51())
+		mx5_cpu_lp_set(WAIT_UNCLOCKED_POWER_OFF);
+	else
 		cpu_do_idle();
 }
 
-- 
cgit v0.10.2


From 0ca03cd7d0fa3bfbd56958136a10f19733c4ce12 Mon Sep 17 00:00:00 2001
From: Mark Brown <broonie@opensource.wolfsonmicro.com>
Date: Wed, 23 Mar 2011 20:45:40 +0000
Subject: ASoC: Explicitly say registerless widgets have no register

This stops code that handles widgets generically from attempting to access
registers for these widgets.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@ti.com>
Cc: stable@kernel.org

diff --git a/include/sound/soc-dapm.h b/include/sound/soc-dapm.h
index 979ed84..ddc2b3d 100644
--- a/include/sound/soc-dapm.h
+++ b/include/sound/soc-dapm.h
@@ -45,25 +45,25 @@
 /* platform domain */
 #define SND_SOC_DAPM_INPUT(wname) \
 {	.id = snd_soc_dapm_input, .name = wname, .kcontrols = NULL, \
-	.num_kcontrols = 0}
+	.num_kcontrols = 0, .reg = SND_SOC_NOPM }
 #define SND_SOC_DAPM_OUTPUT(wname) \
 {	.id = snd_soc_dapm_output, .name = wname, .kcontrols = NULL, \
-	.num_kcontrols = 0}
+	.num_kcontrols = 0, .reg = SND_SOC_NOPM }
 #define SND_SOC_DAPM_MIC(wname, wevent) \
 {	.id = snd_soc_dapm_mic, .name = wname, .kcontrols = NULL, \
-	.num_kcontrols = 0, .event = wevent, \
+	.num_kcontrols = 0, .reg = SND_SOC_NOPM, .event = wevent, \
 	.event_flags = SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMD}
 #define SND_SOC_DAPM_HP(wname, wevent) \
 {	.id = snd_soc_dapm_hp, .name = wname, .kcontrols = NULL, \
-	.num_kcontrols = 0, .event = wevent, \
+	.num_kcontrols = 0, .reg = SND_SOC_NOPM, .event = wevent, \
 	.event_flags = SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_PRE_PMD}
 #define SND_SOC_DAPM_SPK(wname, wevent) \
 {	.id = snd_soc_dapm_spk, .name = wname, .kcontrols = NULL, \
-	.num_kcontrols = 0, .event = wevent, \
+	.num_kcontrols = 0, .reg = SND_SOC_NOPM, .event = wevent, \
 	.event_flags = SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_PRE_PMD}
 #define SND_SOC_DAPM_LINE(wname, wevent) \
 {	.id = snd_soc_dapm_line, .name = wname, .kcontrols = NULL, \
-	.num_kcontrols = 0, .event = wevent, \
+	.num_kcontrols = 0, .reg = SND_SOC_NOPM, .event = wevent, \
 	.event_flags = SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_PRE_PMD}
 
 /* path domain */
@@ -189,11 +189,11 @@
 /* events that are pre and post DAPM */
 #define SND_SOC_DAPM_PRE(wname, wevent) \
 {	.id = snd_soc_dapm_pre, .name = wname, .kcontrols = NULL, \
-	.num_kcontrols = 0, .event = wevent, \
+	.num_kcontrols = 0, .reg = SND_SOC_NOPM, .event = wevent, \
 	.event_flags = SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_PRE_PMD}
 #define SND_SOC_DAPM_POST(wname, wevent) \
 {	.id = snd_soc_dapm_post, .name = wname, .kcontrols = NULL, \
-	.num_kcontrols = 0, .event = wevent, \
+	.num_kcontrols = 0, .reg = SND_SOC_NOPM, .event = wevent, \
 	.event_flags = SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_POST_PMD}
 
 /* stream domain */
-- 
cgit v0.10.2


From 914a76ca5eedc9f286a36f61c4eaa95b451ba3e6 Mon Sep 17 00:00:00 2001
From: Andi Kleen <ak@linux.intel.com>
Date: Wed, 16 Mar 2011 15:44:33 -0400
Subject: oprofile, x86: Allow setting EDGE/INV/CMASK for counter events

For some performance events it's useful to set the EDGE and INV
bits and the CMASK mask in the counter control register. The list
of predefined events Intel releases for each CPU has some events which
require these settings to get more "natural" to use higher level events.

oprofile currently doesn't allow this.

This patch adds new extra configuration fields for them, so that
they can be specified in oprofilefs.

An updated oprofile daemon can then make use of this to set them.

v2: Write back masked extra value to variable.

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Robert Richter <robert.richter@amd.com>

diff --git a/arch/x86/oprofile/nmi_int.c b/arch/x86/oprofile/nmi_int.c
index e2b7b0c..ee165f1 100644
--- a/arch/x86/oprofile/nmi_int.c
+++ b/arch/x86/oprofile/nmi_int.c
@@ -49,6 +49,10 @@ u64 op_x86_get_ctrl(struct op_x86_model_spec const *model,
 	val |= counter_config->user ? ARCH_PERFMON_EVENTSEL_USR : 0;
 	val |= counter_config->kernel ? ARCH_PERFMON_EVENTSEL_OS : 0;
 	val |= (counter_config->unit_mask & 0xFF) << 8;
+	counter_config->extra &= (ARCH_PERFMON_EVENTSEL_INV |
+				  ARCH_PERFMON_EVENTSEL_EDGE |
+				  ARCH_PERFMON_EVENTSEL_CMASK);
+	val |= counter_config->extra;
 	event &= model->event_mask ? model->event_mask : 0xFF;
 	val |= event & 0xFF;
 	val |= (event & 0x0F00) << 24;
@@ -440,6 +444,7 @@ static int nmi_create_files(struct super_block *sb, struct dentry *root)
 		oprofilefs_create_ulong(sb, dir, "unit_mask", &counter_config[i].unit_mask);
 		oprofilefs_create_ulong(sb, dir, "kernel", &counter_config[i].kernel);
 		oprofilefs_create_ulong(sb, dir, "user", &counter_config[i].user);
+		oprofilefs_create_ulong(sb, dir, "extra", &counter_config[i].extra);
 	}
 
 	return 0;
diff --git a/arch/x86/oprofile/op_counter.h b/arch/x86/oprofile/op_counter.h
index e28398d..0b7b7b1 100644
--- a/arch/x86/oprofile/op_counter.h
+++ b/arch/x86/oprofile/op_counter.h
@@ -22,6 +22,7 @@ struct op_counter_config {
 	unsigned long kernel;
 	unsigned long user;
 	unsigned long unit_mask;
+	unsigned long extra;
 };
 
 extern struct op_counter_config counter_config[];
-- 
cgit v0.10.2


From 6ee3b5a12740eddc5a76e130b6cc7cc64468d1f7 Mon Sep 17 00:00:00 2001
From: Chris Wilson <chris@chris-wilson.co.uk>
Date: Thu, 24 Mar 2011 13:26:43 +0000
Subject: drm/i915/lvds: Always return connected in the absence of better
 information

The LVDS connector should default to connected. We tried our best to
verify the claims of the BIOS that the hardware exists during init(),
and then during detect() we then try to verify that the panel is open.
In the event of an unsuccessful query, we should then always report
that the LVDS panel is connected. This was only the case for gen2/3,
later generations leaked the return value from the panel probe instead.

Reported-and-tested-by: Alessandro Suardi <alessandro.suardi@gmail.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Keith Packard <keithp@keithp.com>

diff --git a/drivers/gpu/drm/i915/intel_lvds.c b/drivers/gpu/drm/i915/intel_lvds.c
index 1a311ad..86cd30b 100644
--- a/drivers/gpu/drm/i915/intel_lvds.c
+++ b/drivers/gpu/drm/i915/intel_lvds.c
@@ -473,19 +473,13 @@ static enum drm_connector_status
 intel_lvds_detect(struct drm_connector *connector, bool force)
 {
 	struct drm_device *dev = connector->dev;
-	enum drm_connector_status status = connector_status_connected;
+	enum drm_connector_status status;
 
 	status = intel_panel_detect(dev);
 	if (status != connector_status_unknown)
 		return status;
 
-	/* ACPI lid methods were generally unreliable in this generation, so
-	 * don't even bother.
-	 */
-	if (IS_GEN2(dev) || IS_GEN3(dev))
-		return connector_status_connected;
-
-	return status;
+	return connector_status_connected;
 }
 
 /**
-- 
cgit v0.10.2


From 63a8588debd4dc72becb9e27add9343c76301c7d Mon Sep 17 00:00:00 2001
From: Marc-Antoine Perennou <Marc-Antoine@Perennou.com>
Date: Thu, 24 Mar 2011 14:51:21 -0300
Subject: Bluetooth: add support for Apple MacBook Pro 8,2

Just adding the vendor details makes it work fine.

Signed-off-by: Marc-Antoine Perennou <Marc-Antoine@Perennou.com>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>

diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index 8668114..2af2e77 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -71,6 +71,9 @@ static struct usb_device_id btusb_table[] = {
 	/* Apple MacBookAir3,1, MacBookAir3,2 */
 	{ USB_DEVICE(0x05ac, 0x821b) },
 
+	/* Apple MacBookPro8,2 */
+	{ USB_DEVICE(0x05ac, 0x821a) },
+
 	/* AVM BlueFRITZ! USB v2.0 */
 	{ USB_DEVICE(0x057c, 0x3800) },
 
-- 
cgit v0.10.2


From 52cb1c0d208565d8f06b743cdc6596d744f92e3b Mon Sep 17 00:00:00 2001
From: Suraj Sumangala <suraj@atheros.com>
Date: Wed, 9 Mar 2011 14:44:05 +0530
Subject: Bluetooth: Increment unacked_frames count only the first transmit

This patch lets 'l2cap_pinfo.unacked_frames' be incremented only
the first time a frame is transmitted.

Previously it was being incremented for retransmitted packets
too resulting the value to cross the transmit window size.

Signed-off-by: Suraj Sumangala <suraj@atheros.com>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>

diff --git a/net/bluetooth/l2cap_core.c b/net/bluetooth/l2cap_core.c
index c9f9cec..ca27f3a 100644
--- a/net/bluetooth/l2cap_core.c
+++ b/net/bluetooth/l2cap_core.c
@@ -1116,7 +1116,9 @@ int l2cap_ertm_send(struct sock *sk)
 		bt_cb(skb)->tx_seq = pi->next_tx_seq;
 		pi->next_tx_seq = (pi->next_tx_seq + 1) % 64;
 
-		pi->unacked_frames++;
+		if (bt_cb(skb)->retries == 1)
+			pi->unacked_frames++;
+
 		pi->frames_sent++;
 
 		if (skb_queue_is_last(TX_QUEUE(sk), skb))
-- 
cgit v0.10.2


From f630cf0d5434e3923e1b8226ffa2753ead6b0ce5 Mon Sep 17 00:00:00 2001
From: "Gustavo F. Padovan" <padovan@profusion.mobi>
Date: Wed, 16 Mar 2011 15:36:29 -0300
Subject: Bluetooth: Fix HCI_RESET command synchronization

We can't send new commands before a cmd_complete for the HCI_RESET command
shows up.

Reported-by: Mikko Vinni <mmvinni@yahoo.com>
Reported-by: Justin P. Mattock <justinmattock@gmail.com>
Reported-by: Ed Tomlinson <edt@aei.ca>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
Tested-by: Justin P. Mattock <justinmattock@gmail.com>
Tested-by: Mikko Vinni <mmvinni@yahoo.com>
Tested-by: Ed Tomlinson <edt@aei.ca>

diff --git a/include/net/bluetooth/hci.h b/include/net/bluetooth/hci.h
index ec6acf2..2c0d309 100644
--- a/include/net/bluetooth/hci.h
+++ b/include/net/bluetooth/hci.h
@@ -84,6 +84,8 @@ enum {
 	HCI_SERVICE_CACHE,
 	HCI_LINK_KEYS,
 	HCI_DEBUG_KEYS,
+
+	HCI_RESET,
 };
 
 /* HCI ioctl defines */
diff --git a/net/bluetooth/hci_core.c b/net/bluetooth/hci_core.c
index b372fb8..92b48e2 100644
--- a/net/bluetooth/hci_core.c
+++ b/net/bluetooth/hci_core.c
@@ -186,6 +186,7 @@ static void hci_reset_req(struct hci_dev *hdev, unsigned long opt)
 	BT_DBG("%s %ld", hdev->name, opt);
 
 	/* Reset device */
+	set_bit(HCI_RESET, &hdev->flags);
 	hci_send_cmd(hdev, HCI_OP_RESET, 0, NULL);
 }
 
@@ -213,8 +214,10 @@ static void hci_init_req(struct hci_dev *hdev, unsigned long opt)
 	/* Mandatory initialization */
 
 	/* Reset */
-	if (!test_bit(HCI_QUIRK_NO_RESET, &hdev->quirks))
+	if (!test_bit(HCI_QUIRK_NO_RESET, &hdev->quirks)) {
+			set_bit(HCI_RESET, &hdev->flags);
 			hci_send_cmd(hdev, HCI_OP_RESET, 0, NULL);
+	}
 
 	/* Read Local Supported Features */
 	hci_send_cmd(hdev, HCI_OP_READ_LOCAL_FEATURES, 0, NULL);
@@ -1074,6 +1077,7 @@ static void hci_cmd_timer(unsigned long arg)
 
 	BT_ERR("%s command tx timeout", hdev->name);
 	atomic_set(&hdev->cmd_cnt, 1);
+	clear_bit(HCI_RESET, &hdev->flags);
 	tasklet_schedule(&hdev->cmd_task);
 }
 
diff --git a/net/bluetooth/hci_event.c b/net/bluetooth/hci_event.c
index 3fbfa50..cebe7588 100644
--- a/net/bluetooth/hci_event.c
+++ b/net/bluetooth/hci_event.c
@@ -183,6 +183,8 @@ static void hci_cc_reset(struct hci_dev *hdev, struct sk_buff *skb)
 
 	BT_DBG("%s status 0x%x", hdev->name, status);
 
+	clear_bit(HCI_RESET, &hdev->flags);
+
 	hci_req_complete(hdev, HCI_OP_RESET, status);
 }
 
@@ -1847,7 +1849,7 @@ static inline void hci_cmd_status_evt(struct hci_dev *hdev, struct sk_buff *skb)
 	if (ev->opcode != HCI_OP_NOP)
 		del_timer(&hdev->cmd_timer);
 
-	if (ev->ncmd) {
+	if (ev->ncmd && !test_bit(HCI_RESET, &hdev->flags)) {
 		atomic_set(&hdev->cmd_cnt, 1);
 		if (!skb_queue_empty(&hdev->cmd_q))
 			tasklet_schedule(&hdev->cmd_task);
-- 
cgit v0.10.2


From 8763b4da41132e2d5a896cd5e629c3c0a652205e Mon Sep 17 00:00:00 2001
From: Vinicius Costa Gomes <vinicius.gomes@openbossa.org>
Date: Mon, 14 Mar 2011 18:20:33 -0300
Subject: Bluetooth: Fix sending LE data over USB

Now that we have support for LE connections, before discarding a
frame we must check if there's a LE connection over that transport.

Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@openbossa.org>
Acked-by: Ville Tervo <ville.tervo@nokia.com>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>

diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index 2af2e77..762a510 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -693,7 +693,8 @@ static int btusb_send_frame(struct sk_buff *skb)
 		break;
 
 	case HCI_ACLDATA_PKT:
-		if (!data->bulk_tx_ep || hdev->conn_hash.acl_num < 1)
+		if (!data->bulk_tx_ep || (hdev->conn_hash.acl_num < 1 &&
+						hdev->conn_hash.le_num < 1))
 			return -ENODEV;
 
 		urb = usb_alloc_urb(0, GFP_ATOMIC);
-- 
cgit v0.10.2


From 6994ca5e8ade57d18b7d1e05aad040c441a2ad37 Mon Sep 17 00:00:00 2001
From: Johan Hedberg <johan.hedberg@nokia.com>
Date: Wed, 16 Mar 2011 14:29:34 +0200
Subject: Bluetooth: Fix missing hci_dev_lock_bh in user_confirm_reply

The code was correctly calling _unlock at the end of the function but
there was no actual _lock call anywhere.

Signed-off-by: Johan Hedberg <johan.hedberg@nokia.com>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>

diff --git a/net/bluetooth/mgmt.c b/net/bluetooth/mgmt.c
index 0054c74..4476d8e 100644
--- a/net/bluetooth/mgmt.c
+++ b/net/bluetooth/mgmt.c
@@ -1230,6 +1230,8 @@ static int user_confirm_reply(struct sock *sk, u16 index, unsigned char *data,
 	if (!hdev)
 		return cmd_status(sk, index, mgmt_op, ENODEV);
 
+	hci_dev_lock_bh(hdev);
+
 	if (!test_bit(HCI_UP, &hdev->flags)) {
 		err = cmd_status(sk, index, mgmt_op, ENETDOWN);
 		goto failed;
-- 
cgit v0.10.2


From a0cc9a1b5712ea52aaa4e7abfa0ec2dbe0d820ff Mon Sep 17 00:00:00 2001
From: Andrei Emeltchenko <andrei.emeltchenko@nokia.com>
Date: Thu, 24 Mar 2011 17:16:08 +0200
Subject: Bluetooth: delete hanging L2CAP channel

Sometimes L2CAP connection remains hanging. Make sure that
L2CAP channel is deleted.

Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@nokia.com>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>

diff --git a/net/bluetooth/l2cap_sock.c b/net/bluetooth/l2cap_sock.c
index fc85e7a..f77308e 100644
--- a/net/bluetooth/l2cap_sock.c
+++ b/net/bluetooth/l2cap_sock.c
@@ -923,8 +923,9 @@ void __l2cap_sock_close(struct sock *sk, int reason)
 			rsp.status = cpu_to_le16(L2CAP_CS_NO_INFO);
 			l2cap_send_cmd(conn, l2cap_pi(sk)->ident,
 					L2CAP_CONN_RSP, sizeof(rsp), &rsp);
-		} else
-			l2cap_chan_del(sk, reason);
+		}
+
+		l2cap_chan_del(sk, reason);
 		break;
 
 	case BT_CONNECT:
-- 
cgit v0.10.2


From b77dcf8460ae57d4eb9fd3633eb4f97b8fb20716 Mon Sep 17 00:00:00 2001
From: Thomas Gleixner <tglx@linutronix.de>
Date: Thu, 24 Mar 2011 20:16:42 +0100
Subject: Bluetooth: Fix warning with hci_cmd_timer

After we made debugobjects working again, we got the following:

WARNING: at lib/debugobjects.c:262 debug_print_object+0x8e/0xb0()
Hardware name: System Product Name
ODEBUG: free active (active state 0) object type: timer_list hint: hci_cmd_timer+0x0/0x60
Pid: 2125, comm: dmsetup Tainted: G        W   2.6.38-06707-gc62b389 #110375
Call Trace:
 [<ffffffff8104700a>] warn_slowpath_common+0x7a/0xb0
 [<ffffffff810470b6>] warn_slowpath_fmt+0x46/0x50
 [<ffffffff812d3a5e>] debug_print_object+0x8e/0xb0
 [<ffffffff81bd8810>] ? hci_cmd_timer+0x0/0x60
 [<ffffffff812d4685>] debug_check_no_obj_freed+0x125/0x230
 [<ffffffff810f1063>] ? check_object+0xb3/0x2b0
 [<ffffffff810f3630>] kfree+0x150/0x190
 [<ffffffff81be4d06>] ? bt_host_release+0x16/0x20
 [<ffffffff81be4d06>] bt_host_release+0x16/0x20
 [<ffffffff813a1907>] device_release+0x27/0xa0
 [<ffffffff812c519c>] kobject_release+0x4c/0xa0
 [<ffffffff812c5150>] ? kobject_release+0x0/0xa0
 [<ffffffff812c61f6>] kref_put+0x36/0x70
 [<ffffffff812c4d37>] kobject_put+0x27/0x60
 [<ffffffff813a21f7>] put_device+0x17/0x20
 [<ffffffff81bda4f9>] hci_free_dev+0x29/0x30
 [<ffffffff81928be6>] vhci_release+0x36/0x70
 [<ffffffff810fb366>] fput+0xd6/0x1f0
 [<ffffffff810f8fe6>] filp_close+0x66/0x90
 [<ffffffff810f90a9>] sys_close+0x99/0xf0
 [<ffffffff81d4c96b>] system_call_fastpath+0x16/0x1b

That timer was introduced with commit 6bd32326cda(Bluetooth: Use
proper timer for hci command timout)

Timer seems to be running when the thing is closed. Removing the timer
unconditionally fixes the problem. And yes, it needs to be fixed
before the HCI_UP check.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>

diff --git a/net/bluetooth/hci_core.c b/net/bluetooth/hci_core.c
index 92b48e2..2216620 100644
--- a/net/bluetooth/hci_core.c
+++ b/net/bluetooth/hci_core.c
@@ -587,6 +587,9 @@ static int hci_dev_do_close(struct hci_dev *hdev)
 	hci_req_cancel(hdev, ENODEV);
 	hci_req_lock(hdev);
 
+	/* Stop timer, it might be running */
+	del_timer_sync(&hdev->cmd_timer);
+
 	if (!test_and_clear_bit(HCI_UP, &hdev->flags)) {
 		hci_req_unlock(hdev);
 		return 0;
@@ -626,7 +629,6 @@ static int hci_dev_do_close(struct hci_dev *hdev)
 
 	/* Drop last sent command */
 	if (hdev->sent_cmd) {
-		del_timer_sync(&hdev->cmd_timer);
 		kfree_skb(hdev->sent_cmd);
 		hdev->sent_cmd = NULL;
 	}
-- 
cgit v0.10.2


From 58d5ad5e3c39311835ffcf80353d1318e4f9c155 Mon Sep 17 00:00:00 2001
From: Julien Boibessot <julien.boibessot@armadeus.com>
Date: Thu, 24 Mar 2011 17:29:15 +0100
Subject: mx2/iomux: Set direction for CSPI2 pins

Signed-off-by: Julien Boibessot <julien.boibessot@armadeus.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx2x.h b/arch/arm/plat-mxc/include/mach/iomux-mx2x.h
index c4f116d..7a9b20a 100644
--- a/arch/arm/plat-mxc/include/mach/iomux-mx2x.h
+++ b/arch/arm/plat-mxc/include/mach/iomux-mx2x.h
@@ -90,12 +90,12 @@
 #define PC31_PF_SSI3_CLK	(GPIO_PORTC | GPIO_PF | GPIO_IN | 31)
 #define PD17_PF_I2C_DATA	(GPIO_PORTD | GPIO_PF | GPIO_OUT | 17)
 #define PD18_PF_I2C_CLK		(GPIO_PORTD | GPIO_PF | GPIO_OUT | 18)
-#define PD19_PF_CSPI2_SS2	(GPIO_PORTD | GPIO_PF | 19)
-#define PD20_PF_CSPI2_SS1	(GPIO_PORTD | GPIO_PF | 20)
-#define PD21_PF_CSPI2_SS0	(GPIO_PORTD | GPIO_PF | 21)
-#define PD22_PF_CSPI2_SCLK	(GPIO_PORTD | GPIO_PF | 22)
-#define PD23_PF_CSPI2_MISO	(GPIO_PORTD | GPIO_PF | 23)
-#define PD24_PF_CSPI2_MOSI	(GPIO_PORTD | GPIO_PF | 24)
+#define PD19_PF_CSPI2_SS2	(GPIO_PORTD | GPIO_PF | GPIO_OUT | 19)
+#define PD20_PF_CSPI2_SS1	(GPIO_PORTD | GPIO_PF | GPIO_OUT | 20)
+#define PD21_PF_CSPI2_SS0	(GPIO_PORTD | GPIO_PF | GPIO_OUT | 21)
+#define PD22_PF_CSPI2_SCLK	(GPIO_PORTD | GPIO_PF | GPIO_OUT | 22)
+#define PD23_PF_CSPI2_MISO	(GPIO_PORTD | GPIO_PF | GPIO_IN | 23)
+#define PD24_PF_CSPI2_MOSI	(GPIO_PORTD | GPIO_PF | GPIO_OUT | 24)
 #define PD25_PF_CSPI1_RDY	(GPIO_PORTD | GPIO_PF | GPIO_OUT | 25)
 #define PD26_PF_CSPI1_SS2	(GPIO_PORTD | GPIO_PF | GPIO_OUT | 26)
 #define PD27_PF_CSPI1_SS1	(GPIO_PORTD | GPIO_PF | GPIO_OUT | 27)
-- 
cgit v0.10.2


From 251290a6078cb88382344b3ee535ae8c6254c1b5 Mon Sep 17 00:00:00 2001
From: Andres Salomon <dilinger@queued.net>
Date: Fri, 4 Mar 2011 08:06:53 -0800
Subject: ARM: mx51_efika: update platform data for new mfd changes

Note that this relies on stuff currently in mfd's next tree, but this
is also a newer driver.  I'm not sure which tree it should go through,
as it's a problem that shows up in next.

From: Andres Salomon <dilinger@queued.net>

MFD changes in c738892f cause the mc13xxx_platform_data struct
to change.  This changes one more (new) user of it, fixing a build
error.

Signed-off-by: Andres Salomon <dilinger@queued.net>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

diff --git a/arch/arm/mach-mx5/mx51_efika.c b/arch/arm/mach-mx5/mx51_efika.c
index 07aea9c..d0c7075 100644
--- a/arch/arm/mach-mx5/mx51_efika.c
+++ b/arch/arm/mach-mx5/mx51_efika.c
@@ -571,8 +571,10 @@ static struct mc13xxx_regulator_init_data mx51_efika_regulators[] = {
 
 static struct mc13xxx_platform_data mx51_efika_mc13892_data = {
 	.flags = MC13XXX_USE_RTC | MC13XXX_USE_REGULATOR,
-	.num_regulators = ARRAY_SIZE(mx51_efika_regulators),
-	.regulators = mx51_efika_regulators,
+	.regulators = {
+		.num_regulators = ARRAY_SIZE(mx51_efika_regulators),
+		.regulators = mx51_efika_regulators,
+	},
 };
 
 static struct spi_board_info mx51_efika_spi_board_info[] __initdata = {
-- 
cgit v0.10.2


From 47babe692e90e0333b2448969639b8f0940e3682 Mon Sep 17 00:00:00 2001
From: Shawn Guo <shawn.guo@freescale.com>
Date: Wed, 16 Mar 2011 11:31:06 +0100
Subject: ARM: mxs: dynamically allocate mmc device
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
[ukleinek: fix naming to include complete device name in functions]
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

diff --git a/arch/arm/mach-mxs/clock-mx23.c b/arch/arm/mach-mxs/clock-mx23.c
index d133c7f..c3577ea 100644
--- a/arch/arm/mach-mxs/clock-mx23.c
+++ b/arch/arm/mach-mxs/clock-mx23.c
@@ -521,6 +521,15 @@ static int clk_misc_init(void)
 	__raw_writel(BM_CLKCTRL_CPU_INTERRUPT_WAIT,
 			CLKCTRL_BASE_ADDR + HW_CLKCTRL_CPU_SET);
 
+	/*
+	 * 480 MHz seems too high to be ssp clock source directly,
+	 * so set frac to get a 288 MHz ref_io.
+	 */
+	reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_FRAC);
+	reg &= ~BM_CLKCTRL_FRAC_IOFRAC;
+	reg |= 30 << BP_CLKCTRL_FRAC_IOFRAC;
+	__raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_FRAC);
+
 	return 0;
 }
 
@@ -528,6 +537,12 @@ int __init mx23_clocks_init(void)
 {
 	clk_misc_init();
 
+	/*
+	 * source ssp clock from ref_io than ref_xtal,
+	 * as ref_xtal only provides 24 MHz as maximum.
+	 */
+	clk_set_parent(&ssp_clk, &ref_io_clk);
+
 	clk_enable(&cpu_clk);
 	clk_enable(&hbus_clk);
 	clk_enable(&xbus_clk);
diff --git a/arch/arm/mach-mxs/clock-mx28.c b/arch/arm/mach-mxs/clock-mx28.c
index 5e489a2..1ad97fe 100644
--- a/arch/arm/mach-mxs/clock-mx28.c
+++ b/arch/arm/mach-mxs/clock-mx28.c
@@ -618,6 +618,8 @@ static struct clk_lookup lookups[] = {
 	_REGISTER_CLOCK("pll2", NULL, pll2_clk)
 	_REGISTER_CLOCK("mxs-dma-apbh", NULL, hbus_clk)
 	_REGISTER_CLOCK("mxs-dma-apbx", NULL, xbus_clk)
+	_REGISTER_CLOCK("mxs-mmc.0", NULL, ssp0_clk)
+	_REGISTER_CLOCK("mxs-mmc.1", NULL, ssp1_clk)
 	_REGISTER_CLOCK("flexcan.0", NULL, can0_clk)
 	_REGISTER_CLOCK("flexcan.1", NULL, can1_clk)
 	_REGISTER_CLOCK(NULL, "usb0", usb0_clk)
@@ -737,6 +739,15 @@ static int clk_misc_init(void)
 	reg |= BM_CLKCTRL_ENET_CLK_OUT_EN;
 	__raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_ENET);
 
+	/*
+	 * 480 MHz seems too high to be ssp clock source directly,
+	 * so set frac0 to get a 288 MHz ref_io0.
+	 */
+	reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_FRAC0);
+	reg &= ~BM_CLKCTRL_FRAC0_IO0FRAC;
+	reg |= 30 << BP_CLKCTRL_FRAC0_IO0FRAC;
+	__raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_FRAC0);
+
 	return 0;
 }
 
@@ -744,6 +755,13 @@ int __init mx28_clocks_init(void)
 {
 	clk_misc_init();
 
+	/*
+	 * source ssp clock from ref_io0 than ref_xtal,
+	 * as ref_xtal only provides 24 MHz as maximum.
+	 */
+	clk_set_parent(&ssp0_clk, &ref_io0_clk);
+	clk_set_parent(&ssp1_clk, &ref_io0_clk);
+
 	clk_enable(&cpu_clk);
 	clk_enable(&hbus_clk);
 	clk_enable(&xbus_clk);
diff --git a/arch/arm/mach-mxs/devices-mx23.h b/arch/arm/mach-mxs/devices-mx23.h
index c7e14f4..c6f345f 100644
--- a/arch/arm/mach-mxs/devices-mx23.h
+++ b/arch/arm/mach-mxs/devices-mx23.h
@@ -21,6 +21,10 @@ extern const struct mxs_auart_data mx23_auart_data[] __initconst;
 #define mx23_add_auart0()		mx23_add_auart(0)
 #define mx23_add_auart1()		mx23_add_auart(1)
 
+extern const struct mxs_mxs_mmc_data mx23_mxs_mmc_data[] __initconst;
+#define mx23_add_mxs_mmc(id, pdata) \
+	mxs_add_mxs_mmc(&mx23_mxs_mmc_data[id], pdata)
+
 #define mx23_add_mxs_pwm(id)		mxs_add_mxs_pwm(MX23_PWM_BASE_ADDR, id)
 
 struct platform_device *__init mx23_add_mxsfb(
diff --git a/arch/arm/mach-mxs/devices-mx28.h b/arch/arm/mach-mxs/devices-mx28.h
index 9d08555..c473edd 100644
--- a/arch/arm/mach-mxs/devices-mx28.h
+++ b/arch/arm/mach-mxs/devices-mx28.h
@@ -37,6 +37,10 @@ extern const struct mxs_flexcan_data mx28_flexcan_data[] __initconst;
 extern const struct mxs_i2c_data mx28_mxs_i2c_data[] __initconst;
 #define mx28_add_mxs_i2c(id)		mxs_add_mxs_i2c(&mx28_mxs_i2c_data[id])
 
+extern const struct mxs_mxs_mmc_data mx28_mxs_mmc_data[] __initconst;
+#define mx28_add_mxs_mmc(id, pdata) \
+	mxs_add_mxs_mmc(&mx28_mxs_mmc_data[id], pdata)
+
 #define mx28_add_mxs_pwm(id)		mxs_add_mxs_pwm(MX28_PWM_BASE_ADDR, id)
 
 struct platform_device *__init mx28_add_mxsfb(
diff --git a/arch/arm/mach-mxs/devices/Kconfig b/arch/arm/mach-mxs/devices/Kconfig
index 1451ad06..acf9eea 100644
--- a/arch/arm/mach-mxs/devices/Kconfig
+++ b/arch/arm/mach-mxs/devices/Kconfig
@@ -15,6 +15,9 @@ config MXS_HAVE_PLATFORM_FLEXCAN
 config MXS_HAVE_PLATFORM_MXS_I2C
 	bool
 
+config MXS_HAVE_PLATFORM_MXS_MMC
+	bool
+
 config MXS_HAVE_PLATFORM_MXS_PWM
 	bool
 
diff --git a/arch/arm/mach-mxs/devices/Makefile b/arch/arm/mach-mxs/devices/Makefile
index 0d9bea3..324f282 100644
--- a/arch/arm/mach-mxs/devices/Makefile
+++ b/arch/arm/mach-mxs/devices/Makefile
@@ -4,5 +4,6 @@ obj-y += platform-dma.o
 obj-$(CONFIG_MXS_HAVE_PLATFORM_FEC) += platform-fec.o
 obj-$(CONFIG_MXS_HAVE_PLATFORM_FLEXCAN) += platform-flexcan.o
 obj-$(CONFIG_MXS_HAVE_PLATFORM_MXS_I2C) += platform-mxs-i2c.o
+obj-$(CONFIG_MXS_HAVE_PLATFORM_MXS_MMC) += platform-mxs-mmc.o
 obj-$(CONFIG_MXS_HAVE_PLATFORM_MXS_PWM) += platform-mxs-pwm.o
 obj-$(CONFIG_MXS_HAVE_PLATFORM_MXSFB) += platform-mxsfb.o
diff --git a/arch/arm/mach-mxs/devices/platform-mxs-mmc.c b/arch/arm/mach-mxs/devices/platform-mxs-mmc.c
new file mode 100644
index 0000000..382dacb
--- /dev/null
+++ b/arch/arm/mach-mxs/devices/platform-mxs-mmc.c
@@ -0,0 +1,73 @@
+/*
+ * Copyright (C) 2010 Pengutronix
+ * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
+ *
+ * Copyright 2011 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation.
+ */
+
+#include <linux/compiler.h>
+#include <linux/err.h>
+#include <linux/init.h>
+
+#include <mach/mx23.h>
+#include <mach/mx28.h>
+#include <mach/devices-common.h>
+
+#define mxs_mxs_mmc_data_entry_single(soc, _id, hwid)			\
+	{								\
+		.id = _id,						\
+		.iobase = soc ## _SSP ## hwid ## _BASE_ADDR,		\
+		.dma = soc ## _DMA_SSP ## hwid,				\
+		.irq_err = soc ## _INT_SSP ## hwid ## _ERROR,		\
+		.irq_dma = soc ## _INT_SSP ## hwid ## _DMA,		\
+	}
+
+#define mxs_mxs_mmc_data_entry(soc, _id, hwid)				\
+	[_id] = mxs_mxs_mmc_data_entry_single(soc, _id, hwid)
+
+
+#ifdef CONFIG_SOC_IMX23
+const struct mxs_mxs_mmc_data mx23_mxs_mmc_data[] __initconst = {
+	mxs_mxs_mmc_data_entry(MX23, 0, 1),
+	mxs_mxs_mmc_data_entry(MX23, 1, 2),
+};
+#endif
+
+#ifdef CONFIG_SOC_IMX28
+const struct mxs_mxs_mmc_data mx28_mxs_mmc_data[] __initconst = {
+	mxs_mxs_mmc_data_entry(MX28, 0, 0),
+	mxs_mxs_mmc_data_entry(MX28, 1, 1),
+};
+#endif
+
+struct platform_device *__init mxs_add_mxs_mmc(
+		const struct mxs_mxs_mmc_data *data,
+		const struct mxs_mmc_platform_data *pdata)
+{
+	struct resource res[] = {
+		{
+			.start	= data->iobase,
+			.end	= data->iobase + SZ_8K - 1,
+			.flags	= IORESOURCE_MEM,
+		}, {
+			.start	= data->dma,
+			.end	= data->dma,
+			.flags	= IORESOURCE_DMA,
+		}, {
+			.start	= data->irq_err,
+			.end	= data->irq_err,
+			.flags	= IORESOURCE_IRQ,
+		}, {
+			.start	= data->irq_dma,
+			.end	= data->irq_dma,
+			.flags	= IORESOURCE_IRQ,
+		},
+	};
+
+	return mxs_add_platform_device("mxs-mmc", data->id,
+			res, ARRAY_SIZE(res), pdata, sizeof(*pdata));
+}
diff --git a/arch/arm/mach-mxs/include/mach/devices-common.h b/arch/arm/mach-mxs/include/mach/devices-common.h
index 71f2448..c5137f1 100644
--- a/arch/arm/mach-mxs/include/mach/devices-common.h
+++ b/arch/arm/mach-mxs/include/mach/devices-common.h
@@ -73,6 +73,19 @@ struct mxs_i2c_data {
 };
 struct platform_device * __init mxs_add_mxs_i2c(const struct mxs_i2c_data *data);
 
+/* mmc */
+#include <mach/mmc.h>
+struct mxs_mxs_mmc_data {
+	int id;
+	resource_size_t iobase;
+	resource_size_t dma;
+	resource_size_t irq_err;
+	resource_size_t irq_dma;
+};
+struct platform_device *__init mxs_add_mxs_mmc(
+		const struct mxs_mxs_mmc_data *data,
+		const struct mxs_mmc_platform_data *pdata);
+
 /* pwm */
 struct platform_device *__init mxs_add_mxs_pwm(
 		resource_size_t iobase, int id);
-- 
cgit v0.10.2


From 1b6f1e885ef08c6fda87979a2ca05e910d479985 Mon Sep 17 00:00:00 2001
From: Shawn Guo <shawn.guo@freescale.com>
Date: Tue, 22 Feb 2011 16:49:19 +0800
Subject: ARM: mxs/mx23evk: add mmc device

Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Acked-by: Wolfram Sang <w.sang@pengutronix.de>
Acked-by: Marc Kleine-Budde <mkl@pengutronix.de>
[sha: updated to Uwes v4 version]
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

diff --git a/arch/arm/mach-mxs/Kconfig b/arch/arm/mach-mxs/Kconfig
index 4f6f174..9e81526 100644
--- a/arch/arm/mach-mxs/Kconfig
+++ b/arch/arm/mach-mxs/Kconfig
@@ -22,6 +22,7 @@ config MACH_MX23EVK
 	select SOC_IMX23
 	select MXS_HAVE_AMBA_DUART
 	select MXS_HAVE_PLATFORM_AUART
+	select MXS_HAVE_PLATFORM_MXS_MMC
 	select MXS_HAVE_PLATFORM_MXSFB
 	default y
 	help
diff --git a/arch/arm/mach-mxs/mach-mx23evk.c b/arch/arm/mach-mxs/mach-mx23evk.c
index a66994f..214e5b6 100644
--- a/arch/arm/mach-mxs/mach-mx23evk.c
+++ b/arch/arm/mach-mxs/mach-mx23evk.c
@@ -28,6 +28,8 @@
 
 #define MX23EVK_LCD_ENABLE	MXS_GPIO_NR(1, 18)
 #define MX23EVK_BL_ENABLE	MXS_GPIO_NR(1, 28)
+#define MX23EVK_MMC0_WRITE_PROTECT	MXS_GPIO_NR(1, 30)
+#define MX23EVK_MMC0_SLOT_POWER		MXS_GPIO_NR(1, 29)
 
 static const iomux_cfg_t mx23evk_pads[] __initconst = {
 	/* duart */
@@ -73,6 +75,36 @@ static const iomux_cfg_t mx23evk_pads[] __initconst = {
 	MX23_PAD_LCD_RESET__GPIO_1_18 | MXS_PAD_CTRL,
 	/* backlight control */
 	MX23_PAD_PWM2__GPIO_1_28 | MXS_PAD_CTRL,
+
+	/* mmc */
+	MX23_PAD_SSP1_DATA0__SSP1_DATA0 |
+		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+	MX23_PAD_SSP1_DATA1__SSP1_DATA1 |
+		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+	MX23_PAD_SSP1_DATA2__SSP1_DATA2 |
+		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+	MX23_PAD_SSP1_DATA3__SSP1_DATA3 |
+		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+	MX23_PAD_GPMI_D08__SSP1_DATA4 |
+		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+	MX23_PAD_GPMI_D09__SSP1_DATA5 |
+		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+	MX23_PAD_GPMI_D10__SSP1_DATA6 |
+		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+	MX23_PAD_GPMI_D11__SSP1_DATA7 |
+		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+	MX23_PAD_SSP1_CMD__SSP1_CMD |
+		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+	MX23_PAD_SSP1_DETECT__SSP1_DETECT |
+		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
+	MX23_PAD_SSP1_SCK__SSP1_SCK |
+		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
+	/* write protect */
+	MX23_PAD_PWM4__GPIO_1_30 |
+		(MXS_PAD_4MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
+	/* slot power enable */
+	MX23_PAD_PWM3__GPIO_1_29 |
+		(MXS_PAD_4MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
 };
 
 /* mxsfb (lcdif) */
@@ -101,6 +133,11 @@ static const struct mxsfb_platform_data mx23evk_mxsfb_pdata __initconst = {
 	.ld_intf_width	= STMLCDIF_24BIT,
 };
 
+static struct mxs_mmc_platform_data mx23evk_mmc_pdata __initdata = {
+	.wp_gpio = MX23EVK_MMC0_WRITE_PROTECT,
+	.flags = SLOTF_8_BIT_CAPABLE,
+};
+
 static void __init mx23evk_init(void)
 {
 	int ret;
@@ -110,6 +147,13 @@ static void __init mx23evk_init(void)
 	mx23_add_duart();
 	mx23_add_auart0();
 
+	/* power on mmc slot by writing 0 to the gpio */
+	ret = gpio_request_one(MX23EVK_MMC0_SLOT_POWER, GPIOF_DIR_OUT,
+			       "mmc0-slot-power");
+	if (ret)
+		pr_warn("failed to request gpio mmc0-slot-power: %d\n", ret);
+	mx23_add_mxs_mmc(0, &mx23evk_mmc_pdata);
+
 	ret = gpio_request_one(MX23EVK_LCD_ENABLE, GPIOF_DIR_OUT, "lcd-enable");
 	if (ret)
 		pr_warn("failed to request gpio lcd-enable: %d\n", ret);
-- 
cgit v0.10.2


From 5bb2c828420992357cfe66ceb6f4c3d4121ae1ce Mon Sep 17 00:00:00 2001
From: Shawn Guo <shawn.guo@freescale.com>
Date: Tue, 22 Feb 2011 16:50:24 +0800
Subject: ARM: mxs/mx28evk: add mmc device

Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Acked-by: Wolfram Sang <w.sang@pengutronix.de>
Tested-by: Marc Kleine-Budde <mkl@pengutronix.de>
[sha: updated to Uwes v4 version]
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

diff --git a/arch/arm/mach-mxs/Kconfig b/arch/arm/mach-mxs/Kconfig
index 9e81526..4522fbb 100644
--- a/arch/arm/mach-mxs/Kconfig
+++ b/arch/arm/mach-mxs/Kconfig
@@ -36,6 +36,7 @@ config MACH_MX28EVK
 	select MXS_HAVE_PLATFORM_AUART
 	select MXS_HAVE_PLATFORM_FEC
 	select MXS_HAVE_PLATFORM_FLEXCAN
+	select MXS_HAVE_PLATFORM_MXS_MMC
 	select MXS_HAVE_PLATFORM_MXSFB
 	select MXS_OCOTP
 	default y
diff --git a/arch/arm/mach-mxs/mach-mx28evk.c b/arch/arm/mach-mxs/mach-mx28evk.c
index 08002d0..bb329b9 100644
--- a/arch/arm/mach-mxs/mach-mx28evk.c
+++ b/arch/arm/mach-mxs/mach-mx28evk.c
@@ -34,6 +34,11 @@
 #define MX28EVK_LCD_ENABLE	MXS_GPIO_NR(3, 30)
 #define MX28EVK_FEC_PHY_RESET	MXS_GPIO_NR(4, 13)
 
+#define MX28EVK_MMC0_WRITE_PROTECT	MXS_GPIO_NR(2, 12)
+#define MX28EVK_MMC1_WRITE_PROTECT	MXS_GPIO_NR(0, 28)
+#define MX28EVK_MMC0_SLOT_POWER		MXS_GPIO_NR(3, 28)
+#define MX28EVK_MMC1_SLOT_POWER		MXS_GPIO_NR(3, 29)
+
 static const iomux_cfg_t mx28evk_pads[] __initconst = {
 	/* duart */
 	MX28_PAD_PWM0__DUART_RX | MXS_PAD_CTRL,
@@ -115,6 +120,65 @@ static const iomux_cfg_t mx28evk_pads[] __initconst = {
 	MX28_PAD_LCD_RESET__GPIO_3_30 | MXS_PAD_CTRL,
 	/* backlight control */
 	MX28_PAD_PWM2__GPIO_3_18 | MXS_PAD_CTRL,
+	/* mmc0 */
+	MX28_PAD_SSP0_DATA0__SSP0_D0 |
+		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+	MX28_PAD_SSP0_DATA1__SSP0_D1 |
+		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+	MX28_PAD_SSP0_DATA2__SSP0_D2 |
+		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+	MX28_PAD_SSP0_DATA3__SSP0_D3 |
+		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+	MX28_PAD_SSP0_DATA4__SSP0_D4 |
+		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+	MX28_PAD_SSP0_DATA5__SSP0_D5 |
+		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+	MX28_PAD_SSP0_DATA6__SSP0_D6 |
+		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+	MX28_PAD_SSP0_DATA7__SSP0_D7 |
+		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+	MX28_PAD_SSP0_CMD__SSP0_CMD |
+		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+	MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT |
+		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
+	MX28_PAD_SSP0_SCK__SSP0_SCK |
+		(MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
+	/* write protect */
+	MX28_PAD_SSP1_SCK__GPIO_2_12 |
+		(MXS_PAD_4MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
+	/* slot power enable */
+	MX28_PAD_PWM3__GPIO_3_28 |
+		(MXS_PAD_4MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
+
+	/* mmc1 */
+	MX28_PAD_GPMI_D00__SSP1_D0 |
+		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+	MX28_PAD_GPMI_D01__SSP1_D1 |
+		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+	MX28_PAD_GPMI_D02__SSP1_D2 |
+		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+	MX28_PAD_GPMI_D03__SSP1_D3 |
+		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+	MX28_PAD_GPMI_D04__SSP1_D4 |
+		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+	MX28_PAD_GPMI_D05__SSP1_D5 |
+		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+	MX28_PAD_GPMI_D06__SSP1_D6 |
+		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+	MX28_PAD_GPMI_D07__SSP1_D7 |
+		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+	MX28_PAD_GPMI_RDY1__SSP1_CMD |
+		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+	MX28_PAD_GPMI_RDY0__SSP1_CARD_DETECT |
+		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
+	MX28_PAD_GPMI_WRN__SSP1_SCK |
+		(MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
+	/* write protect */
+	MX28_PAD_GPMI_RESETN__GPIO_0_28 |
+		(MXS_PAD_4MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
+	/* slot power enable */
+	MX28_PAD_PWM4__GPIO_3_29 |
+		(MXS_PAD_4MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
 };
 
 /* fec */
@@ -258,6 +322,18 @@ static const struct mxsfb_platform_data mx28evk_mxsfb_pdata __initconst = {
 	.ld_intf_width	= STMLCDIF_24BIT,
 };
 
+static struct mxs_mmc_platform_data mx28evk_mmc_pdata[] __initdata = {
+	{
+		/* mmc0 */
+		.wp_gpio = MX28EVK_MMC0_WRITE_PROTECT,
+		.flags = SLOTF_8_BIT_CAPABLE,
+	}, {
+		/* mmc1 */
+		.wp_gpio = MX28EVK_MMC1_WRITE_PROTECT,
+		.flags = SLOTF_8_BIT_CAPABLE,
+	},
+};
+
 static void __init mx28evk_init(void)
 {
 	int ret;
@@ -297,6 +373,19 @@ static void __init mx28evk_init(void)
 		gpio_set_value(MX28EVK_BL_ENABLE, 1);
 
 	mx28_add_mxsfb(&mx28evk_mxsfb_pdata);
+
+	/* power on mmc slot by writing 0 to the gpio */
+	ret = gpio_request_one(MX28EVK_MMC0_SLOT_POWER, GPIOF_DIR_OUT,
+			       "mmc0-slot-power");
+	if (ret)
+		pr_warn("failed to request gpio mmc0-slot-power: %d\n", ret);
+	mx28_add_mxs_mmc(0, &mx28evk_mmc_pdata[0]);
+
+	ret = gpio_request_one(MX28EVK_MMC1_SLOT_POWER, GPIOF_DIR_OUT,
+			       "mmc1-slot-power");
+	if (ret)
+		pr_warn("failed to request gpio mmc1-slot-power: %d\n", ret);
+	mx28_add_mxs_mmc(1, &mx28evk_mmc_pdata[1]);
 }
 
 static void __init mx28evk_timer_init(void)
-- 
cgit v0.10.2


From da8db3aab55142ad39061e6b0db1e7b065eac61a Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Eric=20B=C3=A9nard?= <eric@eukrea.com>
Date: Fri, 25 Feb 2011 13:49:57 +0100
Subject: mx3/eukrea_mbimxsd-baseboard: fix gpio request
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

without this patch, we get :
------------[ cut here ]------------
WARNING: at drivers/gpio/gpiolib.c:99 gpio_ensure_requested+0x4c/0x104()
autorequest GPIO-4
.../...
[<c01bcfb0>] (platform_lcd_set_power+0x34/0x40) from [<c033954c>] (platform_lcd_probe+0xb8/0xd8)

Signed-off-by: Eric Bénard <eric@eukrea.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

diff --git a/arch/arm/mach-mx3/eukrea_mbimxsd-baseboard.c b/arch/arm/mach-mx3/eukrea_mbimxsd-baseboard.c
index 8076147..3f67eb6 100644
--- a/arch/arm/mach-mx3/eukrea_mbimxsd-baseboard.c
+++ b/arch/arm/mach-mx3/eukrea_mbimxsd-baseboard.c
@@ -167,7 +167,7 @@ static iomux_v3_cfg_t eukrea_mbimxsd_pads[] = {
 
 #define GPIO_LED1	IMX_GPIO_NR(3, 29)
 #define GPIO_SWITCH1	IMX_GPIO_NR(3, 25)
-#define GPIO_LCDPWR	(4)
+#define GPIO_LCDPWR	IMX_GPIO_NR(1, 4)
 
 static void eukrea_mbimxsd_lcd_power_set(struct plat_lcd_data *pd,
 				   unsigned int power)
@@ -301,7 +301,6 @@ void __init eukrea_mbimxsd35_baseboard_init(void)
 
 	gpio_request(GPIO_LCDPWR, "LCDPWR");
 	gpio_direction_output(GPIO_LCDPWR, 1);
-	gpio_free(GPIO_LCDPWR);
 
 	i2c_register_board_info(0, eukrea_mbimxsd_i2c_devices,
 				ARRAY_SIZE(eukrea_mbimxsd_i2c_devices));
-- 
cgit v0.10.2


From d335cf97060c44e9beb2a25151b5fba8740e1929 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Eric=20B=C3=A9nard?= <eric@eukrea.com>
Date: Fri, 25 Feb 2011 13:49:58 +0100
Subject: mx3/eukrea_mbimxsd-baseboard: add SD card detect support
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Signed-off-by: Eric Bénard <eric@eukrea.com>
Acked-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

diff --git a/arch/arm/mach-mx3/eukrea_mbimxsd-baseboard.c b/arch/arm/mach-mx3/eukrea_mbimxsd-baseboard.c
index 3f67eb6..2e288b3 100644
--- a/arch/arm/mach-mx3/eukrea_mbimxsd-baseboard.c
+++ b/arch/arm/mach-mx3/eukrea_mbimxsd-baseboard.c
@@ -43,6 +43,7 @@
 #include <mach/ipu.h>
 #include <mach/mx3fb.h>
 #include <mach/audmux.h>
+#include <mach/esdhc.h>
 
 #include "devices-imx35.h"
 #include "devices.h"
@@ -163,11 +164,14 @@ static iomux_v3_cfg_t eukrea_mbimxsd_pads[] = {
 	MX35_PAD_SD1_DATA1__ESDHC1_DAT1,
 	MX35_PAD_SD1_DATA2__ESDHC1_DAT2,
 	MX35_PAD_SD1_DATA3__ESDHC1_DAT3,
+	/* SD1 CD */
+	MX35_PAD_LD18__GPIO3_24,
 };
 
 #define GPIO_LED1	IMX_GPIO_NR(3, 29)
 #define GPIO_SWITCH1	IMX_GPIO_NR(3, 25)
 #define GPIO_LCDPWR	IMX_GPIO_NR(1, 4)
+#define GPIO_SD1CD	IMX_GPIO_NR(3, 24)
 
 static void eukrea_mbimxsd_lcd_power_set(struct plat_lcd_data *pd,
 				   unsigned int power)
@@ -254,6 +258,11 @@ struct imx_ssi_platform_data eukrea_mbimxsd_ssi_pdata __initconst = {
 	.flags = IMX_SSI_SYN | IMX_SSI_NET | IMX_SSI_USE_I2S_SLAVE,
 };
 
+static struct esdhc_platform_data sd1_pdata = {
+	.cd_gpio = GPIO_SD1CD,
+	.wp_gpio = -EINVAL,
+};
+
 /*
  * system init for baseboard usage. Will be called by cpuimx35 init.
  *
@@ -289,7 +298,7 @@ void __init eukrea_mbimxsd35_baseboard_init(void)
 	imx35_add_imx_ssi(0, &eukrea_mbimxsd_ssi_pdata);
 
 	imx35_add_flexcan1(NULL);
-	imx35_add_sdhci_esdhc_imx(0, NULL);
+	imx35_add_sdhci_esdhc_imx(0, &sd1_pdata);
 
 	gpio_request(GPIO_LED1, "LED1");
 	gpio_direction_output(GPIO_LED1, 1);
-- 
cgit v0.10.2


From 01ea9aeae84536e2afe769be69b994de9f7ceed7 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Eric=20B=C3=A9nard?= <eric@eukrea.com>
Date: Fri, 25 Feb 2011 13:49:14 +0100
Subject: eukrea_mbimxsd25-baseboard: add SD card detect
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Signed-off-by: Eric Bénard <eric@eukrea.com>
Acked-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

diff --git a/arch/arm/mach-imx/eukrea_mbimxsd25-baseboard.c b/arch/arm/mach-imx/eukrea_mbimxsd25-baseboard.c
index cb705c2..6269053 100644
--- a/arch/arm/mach-imx/eukrea_mbimxsd25-baseboard.c
+++ b/arch/arm/mach-imx/eukrea_mbimxsd25-baseboard.c
@@ -34,6 +34,7 @@
 #include <mach/mx25.h>
 #include <mach/imx-uart.h>
 #include <mach/audmux.h>
+#include <mach/esdhc.h>
 
 #include "devices-imx25.h"
 
@@ -242,6 +243,11 @@ struct imx_ssi_platform_data eukrea_mbimxsd_ssi_pdata __initconst = {
 	.flags = IMX_SSI_SYN | IMX_SSI_NET | IMX_SSI_USE_I2S_SLAVE,
 };
 
+static struct esdhc_platform_data sd1_pdata = {
+	.cd_gpio = GPIO_SD1CD,
+	.wp_gpio = -EINVAL,
+};
+
 /*
  * system init for baseboard usage. Will be called by cpuimx25 init.
  *
@@ -275,7 +281,7 @@ void __init eukrea_mbimxsd25_baseboard_init(void)
 	imx25_add_imx_ssi(0, &eukrea_mbimxsd_ssi_pdata);
 
 	imx25_add_flexcan1(NULL);
-	imx25_add_sdhci_esdhc_imx(0, NULL);
+	imx25_add_sdhci_esdhc_imx(0, &sd1_pdata);
 
 	gpio_request(GPIO_LED1, "LED1");
 	gpio_direction_output(GPIO_LED1, 1);
-- 
cgit v0.10.2


From ef560bfe01eff692a307b7d73e60625ccdf05d87 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Eric=20B=C3=A9nard?= <eric@eukrea.com>
Date: Fri, 25 Feb 2011 14:38:31 +0100
Subject: eukrea_mbimxsd51: add SD Card detect
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Signed-off-by: Eric Bénard <eric@eukrea.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

diff --git a/arch/arm/mach-mx5/eukrea_mbimxsd-baseboard.c b/arch/arm/mach-mx5/eukrea_mbimxsd-baseboard.c
index c372a43..e6c1119 100644
--- a/arch/arm/mach-mx5/eukrea_mbimxsd-baseboard.c
+++ b/arch/arm/mach-mx5/eukrea_mbimxsd-baseboard.c
@@ -67,6 +67,10 @@ static iomux_v3_cfg_t eukrea_mbimxsd_pads[] = {
 	MX51_PAD_SD1_DATA1__SD1_DATA1,
 	MX51_PAD_SD1_DATA2__SD1_DATA2,
 	MX51_PAD_SD1_DATA3__SD1_DATA3,
+	/* SD1 CD */
+	_MX51_PAD_GPIO1_0__SD1_CD | MUX_PAD_CTRL(PAD_CTL_PUS_22K_UP |
+			PAD_CTL_PKE | PAD_CTL_SRE_FAST |
+			PAD_CTL_DSE_HIGH | PAD_CTL_PUE | PAD_CTL_HYS),
 };
 
 #define GPIO_LED1	IMX_GPIO_NR(3, 30)
-- 
cgit v0.10.2


From a10aabd5e313ec6481569be20d120191692b4ca6 Mon Sep 17 00:00:00 2001
From: Wolfram Sang <w.sang@pengutronix.de>
Date: Wed, 23 Feb 2011 14:51:57 +0100
Subject: arm: mach-mx3: pcm043: add write-protect and card-detect for SD1

Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

diff --git a/arch/arm/mach-mx3/mach-pcm043.c b/arch/arm/mach-mx3/mach-pcm043.c
index b3ecfb2..036ba1a 100644
--- a/arch/arm/mach-mx3/mach-pcm043.c
+++ b/arch/arm/mach-mx3/mach-pcm043.c
@@ -40,6 +40,7 @@
 #include <mach/mx3fb.h>
 #include <mach/ulpi.h>
 #include <mach/audmux.h>
+#include <mach/esdhc.h>
 
 #include "devices-imx35.h"
 #include "devices.h"
@@ -217,11 +218,15 @@ static iomux_v3_cfg_t pcm043_pads[] = {
 	MX35_PAD_SD1_DATA1__ESDHC1_DAT1,
 	MX35_PAD_SD1_DATA2__ESDHC1_DAT2,
 	MX35_PAD_SD1_DATA3__ESDHC1_DAT3,
+	MX35_PAD_ATA_DATA10__GPIO2_23, /* WriteProtect */
+	MX35_PAD_ATA_DATA11__GPIO2_24, /* CardDetect */
 };
 
 #define AC97_GPIO_TXFS	IMX_GPIO_NR(2, 31)
 #define AC97_GPIO_TXD	IMX_GPIO_NR(2, 28)
 #define AC97_GPIO_RESET	IMX_GPIO_NR(2, 0)
+#define SD1_GPIO_WP	IMX_GPIO_NR(2, 23)
+#define SD1_GPIO_CD	IMX_GPIO_NR(2, 24)
 
 static void pcm043_ac97_warm_reset(struct snd_ac97 *ac97)
 {
@@ -346,6 +351,11 @@ static int __init pcm043_otg_mode(char *options)
 }
 __setup("otg_mode=", pcm043_otg_mode);
 
+static struct esdhc_platform_data sd1_pdata = {
+	.wp_gpio = SD1_GPIO_WP,
+	.cd_gpio = SD1_GPIO_CD,
+};
+
 /*
  * Board specific initialization.
  */
@@ -395,7 +405,7 @@ static void __init pcm043_init(void)
 		imx35_add_fsl_usb2_udc(&otg_device_pdata);
 
 	imx35_add_flexcan1(NULL);
-	imx35_add_sdhci_esdhc_imx(0, NULL);
+	imx35_add_sdhci_esdhc_imx(0, &sd1_pdata);
 }
 
 static void __init pcm043_timer_init(void)
-- 
cgit v0.10.2


From ef550f6f4f6c9345a27ec85d98f4f7de1adce79c Mon Sep 17 00:00:00 2001
From: Sage Weil <sage@newdream.net>
Date: Fri, 25 Mar 2011 13:27:48 -0700
Subject: ceph: flush msgr_wq during mds_client shutdown

The release method for mds connections uses a backpointer to the
mds_client, so we need to flush the workqueue of any pending work (and
ceph_connection references) prior to freeing the mds_client.  This fixes
an oops easily triggered under UML by

 while true ; do mount ... ; umount ... ; done

Also fix an outdated comment: the flush in ceph_destroy_client only flushes
OSD connections out.  This bug is basically an artifact of the ceph ->
ceph+libceph conversion.

Signed-off-by: Sage Weil <sage@newdream.net>

diff --git a/fs/ceph/mds_client.c b/fs/ceph/mds_client.c
index a1ee8fa..f60b07b 100644
--- a/fs/ceph/mds_client.c
+++ b/fs/ceph/mds_client.c
@@ -3215,9 +3215,15 @@ void ceph_mdsc_destroy(struct ceph_fs_client *fsc)
 {
 	struct ceph_mds_client *mdsc = fsc->mdsc;
 
+	dout("mdsc_destroy %p\n", mdsc);
 	ceph_mdsc_stop(mdsc);
+
+	/* flush out any connection work with references to us */
+	ceph_msgr_flush();
+
 	fsc->mdsc = NULL;
 	kfree(mdsc);
+	dout("mdsc_destroy %p done\n", mdsc);
 }
 
 
diff --git a/net/ceph/ceph_common.c b/net/ceph/ceph_common.c
index 95f96ab..9bbb356 100644
--- a/net/ceph/ceph_common.c
+++ b/net/ceph/ceph_common.c
@@ -394,8 +394,8 @@ void ceph_destroy_client(struct ceph_client *client)
 	ceph_osdc_stop(&client->osdc);
 
 	/*
-	 * make sure mds and osd connections close out before destroying
-	 * the auth module, which is needed to free those connections'
+	 * make sure osd connections close out before destroying the
+	 * auth module, which is needed to free those connections'
 	 * ceph_authorizers.
 	 */
 	ceph_msgr_flush();
-- 
cgit v0.10.2


From b75a9e6bfba5c7343391ac1bacd44d6652dde8da Mon Sep 17 00:00:00 2001
From: Joe Perches <joe@perches.com>
Date: Wed, 20 Oct 2010 11:11:51 -0700
Subject: Blackfin: use more standard pr_fmt in the module loader

Changed pr_fmt(fmt) to make the format arguments match the format.
Changed an argument name in apply_relocate from me to mod so that
the pr_err is consistent with the other uses.
Added missing '\n' to a format.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>

diff --git a/arch/blackfin/kernel/module.c b/arch/blackfin/kernel/module.c
index a6dfa6b..35e350c 100644
--- a/arch/blackfin/kernel/module.c
+++ b/arch/blackfin/kernel/module.c
@@ -4,7 +4,7 @@
  * Licensed under the GPL-2 or later
  */
 
-#define pr_fmt(fmt) "module %s: " fmt
+#define pr_fmt(fmt) "module %s: " fmt, mod->name
 
 #include <linux/moduleloader.h>
 #include <linux/elf.h>
@@ -57,8 +57,7 @@ module_frob_arch_sections(Elf_Ehdr *hdr, Elf_Shdr *sechdrs,
 			dest = l1_inst_sram_alloc(s->sh_size);
 			mod->arch.text_l1 = dest;
 			if (dest == NULL) {
-				pr_err("L1 inst memory allocation failed\n",
-					mod->name);
+				pr_err("L1 inst memory allocation failed\n");
 				return -1;
 			}
 			dma_memcpy(dest, (void *)s->sh_addr, s->sh_size);
@@ -70,8 +69,7 @@ module_frob_arch_sections(Elf_Ehdr *hdr, Elf_Shdr *sechdrs,
 			dest = l1_data_sram_alloc(s->sh_size);
 			mod->arch.data_a_l1 = dest;
 			if (dest == NULL) {
-				pr_err("L1 data memory allocation failed\n",
-					mod->name);
+				pr_err("L1 data memory allocation failed\n");
 				return -1;
 			}
 			memcpy(dest, (void *)s->sh_addr, s->sh_size);
@@ -83,8 +81,7 @@ module_frob_arch_sections(Elf_Ehdr *hdr, Elf_Shdr *sechdrs,
 			dest = l1_data_sram_zalloc(s->sh_size);
 			mod->arch.bss_a_l1 = dest;
 			if (dest == NULL) {
-				pr_err("L1 data memory allocation failed\n",
-					mod->name);
+				pr_err("L1 data memory allocation failed\n");
 				return -1;
 			}
 
@@ -93,8 +90,7 @@ module_frob_arch_sections(Elf_Ehdr *hdr, Elf_Shdr *sechdrs,
 			dest = l1_data_B_sram_alloc(s->sh_size);
 			mod->arch.data_b_l1 = dest;
 			if (dest == NULL) {
-				pr_err("L1 data memory allocation failed\n",
-					mod->name);
+				pr_err("L1 data memory allocation failed\n");
 				return -1;
 			}
 			memcpy(dest, (void *)s->sh_addr, s->sh_size);
@@ -104,8 +100,7 @@ module_frob_arch_sections(Elf_Ehdr *hdr, Elf_Shdr *sechdrs,
 			dest = l1_data_B_sram_alloc(s->sh_size);
 			mod->arch.bss_b_l1 = dest;
 			if (dest == NULL) {
-				pr_err("L1 data memory allocation failed\n",
-					mod->name);
+				pr_err("L1 data memory allocation failed\n");
 				return -1;
 			}
 			memset(dest, 0, s->sh_size);
@@ -117,8 +112,7 @@ module_frob_arch_sections(Elf_Ehdr *hdr, Elf_Shdr *sechdrs,
 			dest = l2_sram_alloc(s->sh_size);
 			mod->arch.text_l2 = dest;
 			if (dest == NULL) {
-				pr_err("L2 SRAM allocation failed\n",
-					mod->name);
+				pr_err("L2 SRAM allocation failed\n");
 				return -1;
 			}
 			memcpy(dest, (void *)s->sh_addr, s->sh_size);
@@ -130,8 +124,7 @@ module_frob_arch_sections(Elf_Ehdr *hdr, Elf_Shdr *sechdrs,
 			dest = l2_sram_alloc(s->sh_size);
 			mod->arch.data_l2 = dest;
 			if (dest == NULL) {
-				pr_err("L2 SRAM allocation failed\n",
-					mod->name);
+				pr_err("L2 SRAM allocation failed\n");
 				return -1;
 			}
 			memcpy(dest, (void *)s->sh_addr, s->sh_size);
@@ -143,8 +136,7 @@ module_frob_arch_sections(Elf_Ehdr *hdr, Elf_Shdr *sechdrs,
 			dest = l2_sram_zalloc(s->sh_size);
 			mod->arch.bss_l2 = dest;
 			if (dest == NULL) {
-				pr_err("L2 SRAM allocation failed\n",
-					mod->name);
+				pr_err("L2 SRAM allocation failed\n");
 				return -1;
 			}
 
@@ -160,9 +152,9 @@ module_frob_arch_sections(Elf_Ehdr *hdr, Elf_Shdr *sechdrs,
 
 int
 apply_relocate(Elf_Shdr * sechdrs, const char *strtab,
-	       unsigned int symindex, unsigned int relsec, struct module *me)
+	       unsigned int symindex, unsigned int relsec, struct module *mod)
 {
-	pr_err(".rel unsupported\n", me->name);
+	pr_err(".rel unsupported\n");
 	return -ENOEXEC;
 }
 
@@ -186,7 +178,7 @@ apply_relocate_add(Elf_Shdr *sechdrs, const char *strtab,
 	Elf32_Sym *sym;
 	unsigned long location, value, size;
 
-	pr_debug("applying relocate section %u to %u\n", mod->name,
+	pr_debug("applying relocate section %u to %u\n",
 		relsec, sechdrs[relsec].sh_info);
 
 	for (i = 0; i < sechdrs[relsec].sh_size / sizeof(*rel); i++) {
@@ -203,14 +195,14 @@ apply_relocate_add(Elf_Shdr *sechdrs, const char *strtab,
 
 #ifdef CONFIG_SMP
 		if (location >= COREB_L1_DATA_A_START) {
-			pr_err("cannot relocate in L1: %u (SMP kernel)",
-				mod->name, ELF32_R_TYPE(rel[i].r_info));
+			pr_err("cannot relocate in L1: %u (SMP kernel)\n",
+				ELF32_R_TYPE(rel[i].r_info));
 			return -ENOEXEC;
 		}
 #endif
 
 		pr_debug("location is %lx, value is %lx type is %d\n",
-			mod->name, location, value, ELF32_R_TYPE(rel[i].r_info));
+			location, value, ELF32_R_TYPE(rel[i].r_info));
 
 		switch (ELF32_R_TYPE(rel[i].r_info)) {
 
@@ -230,11 +222,11 @@ apply_relocate_add(Elf_Shdr *sechdrs, const char *strtab,
 		case R_BFIN_PCREL12_JUMP_S:
 		case R_BFIN_PCREL10:
 			pr_err("unsupported relocation: %u (no -mlong-calls?)\n",
-				mod->name, ELF32_R_TYPE(rel[i].r_info));
+				ELF32_R_TYPE(rel[i].r_info));
 			return -ENOEXEC;
 
 		default:
-			pr_err("unknown relocation: %u\n", mod->name,
+			pr_err("unknown relocation: %u\n",
 				ELF32_R_TYPE(rel[i].r_info));
 			return -ENOEXEC;
 		}
@@ -251,8 +243,7 @@ apply_relocate_add(Elf_Shdr *sechdrs, const char *strtab,
 			isram_memcpy((void *)location, &value, size);
 			break;
 		default:
-			pr_err("invalid relocation for %#lx\n",
-				mod->name, location);
+			pr_err("invalid relocation for %#lx\n", location);
 			return -ENOEXEC;
 		}
 	}
-- 
cgit v0.10.2


From 901c23fb18fad6506c90e17fa265970c311b9227 Mon Sep 17 00:00:00 2001
From: Mike Frysinger <vapier@gentoo.org>
Date: Thu, 24 Mar 2011 02:34:42 -0400
Subject: Blackfin: defconfigs: update after misc devices defaulted to N
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

The default value for misc devices was changed from Y to N which
causes problems for mini defconfigs that were relying on this
defaulting to Y.  So update all of the defconfigs accordingly.

Reported-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>

diff --git a/arch/blackfin/configs/BF527-AD7160-EVAL_defconfig b/arch/blackfin/configs/BF527-AD7160-EVAL_defconfig
index 362f59d..ad0881b 100644
--- a/arch/blackfin/configs/BF527-AD7160-EVAL_defconfig
+++ b/arch/blackfin/configs/BF527-AD7160-EVAL_defconfig
@@ -46,7 +46,6 @@ CONFIG_UNIX=y
 # CONFIG_WIRELESS is not set
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_RAM=y
-# CONFIG_MISC_DEVICES is not set
 # CONFIG_INPUT_MOUSEDEV is not set
 CONFIG_INPUT_EVDEV=y
 # CONFIG_INPUT_KEYBOARD is not set
diff --git a/arch/blackfin/configs/BF538-EZKIT_defconfig b/arch/blackfin/configs/BF538-EZKIT_defconfig
index 6883803..580bf42 100644
--- a/arch/blackfin/configs/BF538-EZKIT_defconfig
+++ b/arch/blackfin/configs/BF538-EZKIT_defconfig
@@ -70,7 +70,6 @@ CONFIG_MTD_ROM=m
 CONFIG_MTD_PHYSMAP=m
 CONFIG_MTD_NAND=m
 CONFIG_BLK_DEV_RAM=y
-# CONFIG_MISC_DEVICES is not set
 CONFIG_NETDEVICES=y
 CONFIG_PHYLIB=y
 CONFIG_SMSC_PHY=y
diff --git a/arch/blackfin/configs/BF561-ACVILON_defconfig b/arch/blackfin/configs/BF561-ACVILON_defconfig
index b7c8451..77a27e3 100644
--- a/arch/blackfin/configs/BF561-ACVILON_defconfig
+++ b/arch/blackfin/configs/BF561-ACVILON_defconfig
@@ -63,7 +63,6 @@ CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=2
 CONFIG_BLK_DEV_RAM_SIZE=16384
-# CONFIG_MISC_DEVICES is not set
 CONFIG_SCSI=y
 # CONFIG_SCSI_PROC_FS is not set
 CONFIG_BLK_DEV_SD=y
diff --git a/arch/blackfin/configs/BlackStamp_defconfig b/arch/blackfin/configs/BlackStamp_defconfig
index 97ebe09..8501431 100644
--- a/arch/blackfin/configs/BlackStamp_defconfig
+++ b/arch/blackfin/configs/BlackStamp_defconfig
@@ -58,6 +58,7 @@ CONFIG_MTD_M25P80=y
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_NBD=y
 CONFIG_BLK_DEV_RAM=y
+CONFIG_MISC_DEVICES=y
 CONFIG_EEPROM_AT25=y
 CONFIG_NETDEVICES=y
 CONFIG_NET_ETHERNET=y
diff --git a/arch/blackfin/configs/CM-BF527_defconfig b/arch/blackfin/configs/CM-BF527_defconfig
index c245754..dbf750c 100644
--- a/arch/blackfin/configs/CM-BF527_defconfig
+++ b/arch/blackfin/configs/CM-BF527_defconfig
@@ -64,7 +64,6 @@ CONFIG_MTD_ROM=m
 CONFIG_MTD_COMPLEX_MAPPINGS=y
 CONFIG_MTD_GPIO_ADDR=y
 CONFIG_BLK_DEV_RAM=y
-# CONFIG_MISC_DEVICES is not set
 CONFIG_SCSI=y
 CONFIG_BLK_DEV_SD=y
 # CONFIG_SCSI_LOWLEVEL is not set
diff --git a/arch/blackfin/configs/CM-BF533_defconfig b/arch/blackfin/configs/CM-BF533_defconfig
index baf1c15..07ffbda 100644
--- a/arch/blackfin/configs/CM-BF533_defconfig
+++ b/arch/blackfin/configs/CM-BF533_defconfig
@@ -44,7 +44,6 @@ CONFIG_MTD_CFI=y
 CONFIG_MTD_CFI_INTELEXT=y
 CONFIG_MTD_RAM=y
 CONFIG_MTD_PHYSMAP=y
-# CONFIG_MISC_DEVICES is not set
 CONFIG_NETDEVICES=y
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
diff --git a/arch/blackfin/configs/CM-BF548_defconfig b/arch/blackfin/configs/CM-BF548_defconfig
index df26758..31d9542 100644
--- a/arch/blackfin/configs/CM-BF548_defconfig
+++ b/arch/blackfin/configs/CM-BF548_defconfig
@@ -63,7 +63,6 @@ CONFIG_MTD_RAM=y
 CONFIG_MTD_COMPLEX_MAPPINGS=y
 CONFIG_MTD_PHYSMAP=y
 CONFIG_BLK_DEV_RAM=y
-# CONFIG_MISC_DEVICES is not set
 CONFIG_SCSI=m
 CONFIG_BLK_DEV_SD=m
 # CONFIG_SCSI_LOWLEVEL is not set
diff --git a/arch/blackfin/configs/DNP5370_defconfig b/arch/blackfin/configs/DNP5370_defconfig
index f503136..b192acf 100644
--- a/arch/blackfin/configs/DNP5370_defconfig
+++ b/arch/blackfin/configs/DNP5370_defconfig
@@ -55,7 +55,6 @@ CONFIG_MTD_NAND=y
 CONFIG_MTD_NAND_PLATFORM=y
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_RAM=y
-# CONFIG_MISC_DEVICES is not set
 CONFIG_NETDEVICES=y
 CONFIG_DAVICOM_PHY=y
 CONFIG_NET_ETHERNET=y
diff --git a/arch/blackfin/configs/H8606_defconfig b/arch/blackfin/configs/H8606_defconfig
index 7450127..06e9f49 100644
--- a/arch/blackfin/configs/H8606_defconfig
+++ b/arch/blackfin/configs/H8606_defconfig
@@ -45,6 +45,7 @@ CONFIG_MTD_COMPLEX_MAPPINGS=y
 CONFIG_MTD_M25P80=y
 # CONFIG_M25PXX_USE_FAST_READ is not set
 CONFIG_BLK_DEV_RAM=y
+CONFIG_MISC_DEVICES=y
 CONFIG_EEPROM_AT25=y
 CONFIG_NETDEVICES=y
 CONFIG_NET_ETHERNET=y
diff --git a/arch/blackfin/configs/SRV1_defconfig b/arch/blackfin/configs/SRV1_defconfig
index 8538095..12e66cd 100644
--- a/arch/blackfin/configs/SRV1_defconfig
+++ b/arch/blackfin/configs/SRV1_defconfig
@@ -48,6 +48,7 @@ CONFIG_MTD_COMPLEX_MAPPINGS=y
 CONFIG_MTD_UCLINUX=y
 CONFIG_MTD_NAND=m
 CONFIG_BLK_DEV_RAM=y
+CONFIG_MISC_DEVICES=y
 CONFIG_EEPROM_AT25=m
 CONFIG_NETDEVICES=y
 # CONFIG_NETDEV_1000 is not set
-- 
cgit v0.10.2


From 92a19d66a3cc17feae20b4c1147e8b4dbf7b2282 Mon Sep 17 00:00:00 2001
From: Mike Frysinger <vapier@gentoo.org>
Date: Fri, 25 Mar 2011 16:24:36 -0400
Subject: Blackfin: bitops: fix include order after little endian inclusion

The le.h header requires things like test_bit to be declared, so we need
to move its inclusion to after the point where that happens.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>

diff --git a/arch/blackfin/include/asm/bitops.h b/arch/blackfin/include/asm/bitops.h
index 49762c6..8a0fed1 100644
--- a/arch/blackfin/include/asm/bitops.h
+++ b/arch/blackfin/include/asm/bitops.h
@@ -25,7 +25,6 @@
 #include <asm-generic/bitops/const_hweight.h>
 #include <asm-generic/bitops/lock.h>
 
-#include <asm-generic/bitops/le.h>
 #include <asm-generic/bitops/ext2-atomic.h>
 
 #ifndef CONFIG_SMP
@@ -113,6 +112,9 @@ static inline int test_and_change_bit(int nr, volatile unsigned long *addr)
 
 #endif /* CONFIG_SMP */
 
+/* Needs to be after test_bit and friends */
+#include <asm-generic/bitops/le.h>
+
 /*
  * hweightN: returns the hamming weight (i.e. the number
  * of bits set) of a N-bit word
-- 
cgit v0.10.2


From 0efc48ecaf0f84430524a1759ab9c60aad8eab1e Mon Sep 17 00:00:00 2001
From: Pawel Moll <pawel.moll@arm.com>
Date: Thu, 17 Mar 2011 13:10:22 +0100
Subject: ARM: 6807/1: realview: Fix secondary GIC initialisation for EB with
 MPCore tile

The second GIC, present when EB board is used with a MPCore tile,
was initialised starting with irq number 64, which made interrupts
64-95 in the primary GIC unusable.

Signed-off-by: Pawel Moll <pawel.moll@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

diff --git a/arch/arm/mach-realview/realview_eb.c b/arch/arm/mach-realview/realview_eb.c
index 2ecc1d9..10e75fa 100644
--- a/arch/arm/mach-realview/realview_eb.c
+++ b/arch/arm/mach-realview/realview_eb.c
@@ -348,7 +348,7 @@ static void __init gic_init_irq(void)
 
 #ifndef CONFIG_REALVIEW_EB_ARM11MP_REVB
 		/* board GIC, secondary */
-		gic_init(1, 64, __io_address(REALVIEW_EB_GIC_DIST_BASE),
+		gic_init(1, 96, __io_address(REALVIEW_EB_GIC_DIST_BASE),
 			 __io_address(REALVIEW_EB_GIC_CPU_BASE));
 		gic_cascade_irq(1, IRQ_EB11MP_EB_IRQ1);
 #endif
-- 
cgit v0.10.2


From fb4fe87d79511398a68000d2100c825f54b51652 Mon Sep 17 00:00:00 2001
From: Nicolas Pitre <nicolas.pitre@linaro.org>
Date: Tue, 22 Mar 2011 19:09:14 +0100
Subject: ARM: 6825/1: kernel/sleep.S: fix Thumb2 compilation issues

Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>
Reviewed-by: Dave Martin <dave.martin@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

diff --git a/arch/arm/kernel/sleep.S b/arch/arm/kernel/sleep.S
index bfad698..6398ead 100644
--- a/arch/arm/kernel/sleep.S
+++ b/arch/arm/kernel/sleep.S
@@ -119,11 +119,19 @@ ENTRY(cpu_resume)
 #else
 	ldr	r0, sleep_save_sp	@ stack phys addr
 #endif
-	msr	cpsr_c, #PSR_I_BIT | PSR_F_BIT | SVC_MODE @ set SVC, irqs off
+	setmode	PSR_I_BIT | PSR_F_BIT | SVC_MODE, r1  @ set SVC, irqs off
 #ifdef MULTI_CPU
-	ldmia	r0!, {r1, sp, lr, pc}	@ load v:p, stack, return fn, resume fn
+	@ load v:p, stack, return fn, resume fn
+  ARM(	ldmia	r0!, {r1, sp, lr, pc}	)
+THUMB(	ldmia	r0!, {r1, r2, r3, r4}	)
+THUMB(	mov	sp, r2			)
+THUMB(	mov	lr, r3			)
+THUMB(	bx	r4			)
 #else
-	ldmia	r0!, {r1, sp, lr}	@ load v:p, stack, return fn
+	@ load v:p, stack, return fn
+  ARM(	ldmia	r0!, {r1, sp, lr}	)
+THUMB(	ldmia	r0!, {r1, r2, lr}	)
+THUMB(	mov	sp, r2			)
 	b	cpu_do_resume
 #endif
 ENDPROC(cpu_resume)
-- 
cgit v0.10.2


From d25d3b4c4d0e27975ee659a64b6d29f02fdbfde4 Mon Sep 17 00:00:00 2001
From: Will Deacon <will.deacon@arm.com>
Date: Fri, 25 Mar 2011 13:12:23 +0100
Subject: ARM: 6833/1: perf: add required isbs() to ARMv7 backend

The ARMv7 architecture does not guarantee that effects from co-processor
writes are immediately visible to following instructions.

This patch adds two isbs to the ARMv7 perf code:

(1) Immediately after selecting an event register, so that the PMU state
    following this instruction is consistent with the new event.

(2) Immediately before writing to the PMCR, so that any previous writes
    to the PMU have taken effect before (typically) enabling the
    counters.

Acked-by: Jean Pihet <j-pihet@ti.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

diff --git a/arch/arm/kernel/perf_event_v7.c b/arch/arm/kernel/perf_event_v7.c
index 2e14025..d6c9dcd 100644
--- a/arch/arm/kernel/perf_event_v7.c
+++ b/arch/arm/kernel/perf_event_v7.c
@@ -466,6 +466,7 @@ static inline unsigned long armv7_pmnc_read(void)
 static inline void armv7_pmnc_write(unsigned long val)
 {
 	val &= ARMV7_PMNC_MASK;
+	isb();
 	asm volatile("mcr p15, 0, %0, c9, c12, 0" : : "r"(val));
 }
 
@@ -502,6 +503,7 @@ static inline int armv7_pmnc_select_counter(unsigned int idx)
 
 	val = (idx - ARMV7_EVENT_CNT_TO_CNTx) & ARMV7_SELECT_MASK;
 	asm volatile("mcr p15, 0, %0, c9, c12, 5" : : "r" (val));
+	isb();
 
 	return idx;
 }
-- 
cgit v0.10.2


From 574b69cbb633037a9c305d2993aeb680f4a8badd Mon Sep 17 00:00:00 2001
From: Will Deacon <will.deacon@arm.com>
Date: Fri, 25 Mar 2011 13:13:34 +0100
Subject: ARM: 6834/1: perf: reset counters on all CPUs during initialisation

ARMv7 dictates that the interrupt-enable and count-enable registers for
each PMU counter are UNKNOWN following core reset.

This patch adds a new (optional) function pointer to struct arm_pmu for
resetting the PMU state during init. The reset function is called on
each CPU via an arch_initcall in the generic ARM perf_event code and
allows the PMU backend to write sane values to any UNKNOWN registers.

Acked-by: Jean Pihet <j-pihet@ti.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

diff --git a/arch/arm/kernel/perf_event.c b/arch/arm/kernel/perf_event.c
index 22e194eb..e422f4c 100644
--- a/arch/arm/kernel/perf_event.c
+++ b/arch/arm/kernel/perf_event.c
@@ -79,6 +79,7 @@ struct arm_pmu {
 	void		(*write_counter)(int idx, u32 val);
 	void		(*start)(void);
 	void		(*stop)(void);
+	void		(*reset)(void *);
 	const unsigned	(*cache_map)[PERF_COUNT_HW_CACHE_MAX]
 				    [PERF_COUNT_HW_CACHE_OP_MAX]
 				    [PERF_COUNT_HW_CACHE_RESULT_MAX];
@@ -624,6 +625,19 @@ static struct pmu pmu = {
 #include "perf_event_v6.c"
 #include "perf_event_v7.c"
 
+/*
+ * Ensure the PMU has sane values out of reset.
+ * This requires SMP to be available, so exists as a separate initcall.
+ */
+static int __init
+armpmu_reset(void)
+{
+	if (armpmu && armpmu->reset)
+		return on_each_cpu(armpmu->reset, NULL, 1);
+	return 0;
+}
+arch_initcall(armpmu_reset);
+
 static int __init
 init_hw_perf_events(void)
 {
diff --git a/arch/arm/kernel/perf_event_v7.c b/arch/arm/kernel/perf_event_v7.c
index d6c9dcd..c08d07a 100644
--- a/arch/arm/kernel/perf_event_v7.c
+++ b/arch/arm/kernel/perf_event_v7.c
@@ -849,6 +849,18 @@ static int armv7pmu_get_event_idx(struct cpu_hw_events *cpuc,
 	}
 }
 
+static void armv7pmu_reset(void *info)
+{
+	u32 idx, nb_cnt = armpmu->num_events;
+
+	/* The counter and interrupt enable registers are unknown at reset. */
+	for (idx = 1; idx < nb_cnt; ++idx)
+		armv7pmu_disable_event(NULL, idx);
+
+	/* Initialize & Reset PMNC: C and P bits */
+	armv7_pmnc_write(ARMV7_PMNC_P | ARMV7_PMNC_C);
+}
+
 static struct arm_pmu armv7pmu = {
 	.handle_irq		= armv7pmu_handle_irq,
 	.enable			= armv7pmu_enable_event,
@@ -858,17 +870,15 @@ static struct arm_pmu armv7pmu = {
 	.get_event_idx		= armv7pmu_get_event_idx,
 	.start			= armv7pmu_start,
 	.stop			= armv7pmu_stop,
+	.reset			= armv7pmu_reset,
 	.raw_event_mask		= 0xFF,
 	.max_period		= (1LLU << 32) - 1,
 };
 
-static u32 __init armv7_reset_read_pmnc(void)
+static u32 __init armv7_read_num_pmnc_events(void)
 {
 	u32 nb_cnt;
 
-	/* Initialize & Reset PMNC: C and P bits */
-	armv7_pmnc_write(ARMV7_PMNC_P | ARMV7_PMNC_C);
-
 	/* Read the nb of CNTx counters supported from PMNC */
 	nb_cnt = (armv7_pmnc_read() >> ARMV7_PMNC_N_SHIFT) & ARMV7_PMNC_N_MASK;
 
@@ -882,7 +892,7 @@ static const struct arm_pmu *__init armv7_a8_pmu_init(void)
 	armv7pmu.name		= "ARMv7 Cortex-A8";
 	armv7pmu.cache_map	= &armv7_a8_perf_cache_map;
 	armv7pmu.event_map	= &armv7_a8_perf_map;
-	armv7pmu.num_events	= armv7_reset_read_pmnc();
+	armv7pmu.num_events	= armv7_read_num_pmnc_events();
 	return &armv7pmu;
 }
 
@@ -892,7 +902,7 @@ static const struct arm_pmu *__init armv7_a9_pmu_init(void)
 	armv7pmu.name		= "ARMv7 Cortex-A9";
 	armv7pmu.cache_map	= &armv7_a9_perf_cache_map;
 	armv7pmu.event_map	= &armv7_a9_perf_map;
-	armv7pmu.num_events	= armv7_reset_read_pmnc();
+	armv7pmu.num_events	= armv7_read_num_pmnc_events();
 	return &armv7pmu;
 }
 #else
-- 
cgit v0.10.2


From a737823d37666255e3e74ce84bc9611a038e0888 Mon Sep 17 00:00:00 2001
From: Will Deacon <will.deacon@arm.com>
Date: Fri, 25 Mar 2011 17:12:37 +0100
Subject: ARM: 6835/1: perf: ensure overflows aren't missed due to IRQ latency

If a counter overflows during a perf stat profiling run it may overtake
the last known value of the counter:

    0        prev     new                0xffffffff
    |----------|-------|----------------------|

In this case, the number of events that have occurred is
(0xffffffff - prev) + new. Unfortunately, the event update code will
not realise an overflow has occurred and will instead report the event
delta as (new - prev) which may be considerably smaller than the real
count.

This patch adds an extra argument to armpmu_event_update which indicates
whether or not an overflow has occurred. If an overflow has occurred
then we use the maximum period of the counter to calculate the elapsed
events.

Acked-by: Jamie Iles <jamie@jamieiles.com>
Reported-by: Ashwin Chaugule <ashwinc@codeaurora.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

diff --git a/arch/arm/kernel/perf_event.c b/arch/arm/kernel/perf_event.c
index e422f4c..69cfee0 100644
--- a/arch/arm/kernel/perf_event.c
+++ b/arch/arm/kernel/perf_event.c
@@ -205,11 +205,9 @@ armpmu_event_set_period(struct perf_event *event,
 static u64
 armpmu_event_update(struct perf_event *event,
 		    struct hw_perf_event *hwc,
-		    int idx)
+		    int idx, int overflow)
 {
-	int shift = 64 - 32;
-	s64 prev_raw_count, new_raw_count;
-	u64 delta;
+	u64 delta, prev_raw_count, new_raw_count;
 
 again:
 	prev_raw_count = local64_read(&hwc->prev_count);
@@ -219,8 +217,13 @@ again:
 			     new_raw_count) != prev_raw_count)
 		goto again;
 
-	delta = (new_raw_count << shift) - (prev_raw_count << shift);
-	delta >>= shift;
+	new_raw_count &= armpmu->max_period;
+	prev_raw_count &= armpmu->max_period;
+
+	if (overflow)
+		delta = armpmu->max_period - prev_raw_count + new_raw_count;
+	else
+		delta = new_raw_count - prev_raw_count;
 
 	local64_add(delta, &event->count);
 	local64_sub(delta, &hwc->period_left);
@@ -237,7 +240,7 @@ armpmu_read(struct perf_event *event)
 	if (hwc->idx < 0)
 		return;
 
-	armpmu_event_update(event, hwc, hwc->idx);
+	armpmu_event_update(event, hwc, hwc->idx, 0);
 }
 
 static void
@@ -255,7 +258,7 @@ armpmu_stop(struct perf_event *event, int flags)
 	if (!(hwc->state & PERF_HES_STOPPED)) {
 		armpmu->disable(hwc, hwc->idx);
 		barrier(); /* why? */
-		armpmu_event_update(event, hwc, hwc->idx);
+		armpmu_event_update(event, hwc, hwc->idx, 0);
 		hwc->state |= PERF_HES_STOPPED | PERF_HES_UPTODATE;
 	}
 }
diff --git a/arch/arm/kernel/perf_event_v6.c b/arch/arm/kernel/perf_event_v6.c
index 6fc2d22..f1e8dd9 100644
--- a/arch/arm/kernel/perf_event_v6.c
+++ b/arch/arm/kernel/perf_event_v6.c
@@ -474,7 +474,7 @@ armv6pmu_handle_irq(int irq_num,
 			continue;
 
 		hwc = &event->hw;
-		armpmu_event_update(event, hwc, idx);
+		armpmu_event_update(event, hwc, idx, 1);
 		data.period = event->hw.last_period;
 		if (!armpmu_event_set_period(event, hwc, idx))
 			continue;
diff --git a/arch/arm/kernel/perf_event_v7.c b/arch/arm/kernel/perf_event_v7.c
index c08d07a..4960686 100644
--- a/arch/arm/kernel/perf_event_v7.c
+++ b/arch/arm/kernel/perf_event_v7.c
@@ -782,7 +782,7 @@ static irqreturn_t armv7pmu_handle_irq(int irq_num, void *dev)
 			continue;
 
 		hwc = &event->hw;
-		armpmu_event_update(event, hwc, idx);
+		armpmu_event_update(event, hwc, idx, 1);
 		data.period = event->hw.last_period;
 		if (!armpmu_event_set_period(event, hwc, idx))
 			continue;
diff --git a/arch/arm/kernel/perf_event_xscale.c b/arch/arm/kernel/perf_event_xscale.c
index 28cd3b0..39affbe 100644
--- a/arch/arm/kernel/perf_event_xscale.c
+++ b/arch/arm/kernel/perf_event_xscale.c
@@ -246,7 +246,7 @@ xscale1pmu_handle_irq(int irq_num, void *dev)
 			continue;
 
 		hwc = &event->hw;
-		armpmu_event_update(event, hwc, idx);
+		armpmu_event_update(event, hwc, idx, 1);
 		data.period = event->hw.last_period;
 		if (!armpmu_event_set_period(event, hwc, idx))
 			continue;
@@ -578,7 +578,7 @@ xscale2pmu_handle_irq(int irq_num, void *dev)
 			continue;
 
 		hwc = &event->hw;
-		armpmu_event_update(event, hwc, idx);
+		armpmu_event_update(event, hwc, idx, 1);
 		data.period = event->hw.last_period;
 		if (!armpmu_event_set_period(event, hwc, idx))
 			continue;
-- 
cgit v0.10.2


From 56a3536c226f58497a8b1b7959b581983bcf04c9 Mon Sep 17 00:00:00 2001
From: Peter Ujfalusi <peter.ujfalusi@nokia.com>
Date: Thu, 24 Mar 2011 08:58:05 +0200
Subject: ASoC: tlv320dac33: Restore L/R DAC power control register

Register 0x40, 0x41 need to be restored after power up, since
it contains gain related fields, which affects playback volume.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>

diff --git a/sound/soc/codecs/tlv320dac33.c b/sound/soc/codecs/tlv320dac33.c
index 93f38b1..6c3735d 100644
--- a/sound/soc/codecs/tlv320dac33.c
+++ b/sound/soc/codecs/tlv320dac33.c
@@ -324,6 +324,10 @@ static void dac33_init_chip(struct snd_soc_codec *codec)
 	dac33_write(codec, DAC33_OUT_AMP_CTRL,
 		    dac33_read_reg_cache(codec, DAC33_OUT_AMP_CTRL));
 
+	dac33_write(codec, DAC33_LDAC_PWR_CTRL,
+		    dac33_read_reg_cache(codec, DAC33_LDAC_PWR_CTRL));
+	dac33_write(codec, DAC33_RDAC_PWR_CTRL,
+		    dac33_read_reg_cache(codec, DAC33_RDAC_PWR_CTRL));
 }
 
 static inline int dac33_read_id(struct snd_soc_codec *codec)
-- 
cgit v0.10.2


From 19aab08d69e05c8d9a9ad315e59dd0493bf86045 Mon Sep 17 00:00:00 2001
From: Axel Lin <axel.lin@gmail.com>
Date: Sat, 26 Mar 2011 15:53:58 +0800
Subject: ASoC: twl6040: Return -ENOMEM if create_singlethread_workqueue fails

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>

diff --git a/sound/soc/codecs/twl6040.c b/sound/soc/codecs/twl6040.c
index 482fcdb..255901c 100644
--- a/sound/soc/codecs/twl6040.c
+++ b/sound/soc/codecs/twl6040.c
@@ -1629,8 +1629,10 @@ static int twl6040_probe(struct snd_soc_codec *codec)
 	priv->naudint = naudint;
 	priv->workqueue = create_singlethread_workqueue("twl6040-codec");
 
-	if (!priv->workqueue)
+	if (!priv->workqueue) {
+		ret = -ENOMEM;
 		goto work_err;
+	}
 
 	INIT_DELAYED_WORK(&priv->delayed_work, twl6040_accessory_work);
 
-- 
cgit v0.10.2


From 2c4cf17a52f04fbe929977252d5b8ab81d2c6e9b Mon Sep 17 00:00:00 2001
From: Wolfram Sang <w.sang@pengutronix.de>
Date: Fri, 25 Mar 2011 16:51:44 +0100
Subject: ASoC: imx: set watermarks for mx2-dma

They got accidently removed by f0fba2a (ASoC: multi-component - ASoC
Multi-Component Support). Reintroduce them and get rid of the
superfluous defines because the fiq-driver has its own hardcoded values.

Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Acked-by: Liam Girdwood <lrg@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Cc: stable@kernel.org

diff --git a/sound/soc/imx/imx-pcm-dma-mx2.c b/sound/soc/imx/imx-pcm-dma-mx2.c
index 671ef8d..b2ed764 100644
--- a/sound/soc/imx/imx-pcm-dma-mx2.c
+++ b/sound/soc/imx/imx-pcm-dma-mx2.c
@@ -303,6 +303,11 @@ static struct snd_soc_platform_driver imx_soc_platform_mx2 = {
 
 static int __devinit imx_soc_platform_probe(struct platform_device *pdev)
 {
+	struct imx_ssi *ssi = platform_get_drvdata(pdev);
+
+	ssi->dma_params_tx.burstsize = 6;
+	ssi->dma_params_rx.burstsize = 4;
+
 	return snd_soc_register_platform(&pdev->dev, &imx_soc_platform_mx2);
 }
 
diff --git a/sound/soc/imx/imx-ssi.h b/sound/soc/imx/imx-ssi.h
index a4406a1..dc8a875 100644
--- a/sound/soc/imx/imx-ssi.h
+++ b/sound/soc/imx/imx-ssi.h
@@ -234,7 +234,4 @@ void imx_pcm_free(struct snd_pcm *pcm);
  */
 #define IMX_SSI_DMABUF_SIZE	(64 * 1024)
 
-#define DMA_RXFIFO_BURST      0x4
-#define DMA_TXFIFO_BURST      0x6
-
 #endif /* _IMX_SSI_H */
-- 
cgit v0.10.2


From e1bb31b444668bc957c337d33803db7cb3330745 Mon Sep 17 00:00:00 2001
From: Wolfram Sang <w.sang@pengutronix.de>
Date: Fri, 25 Mar 2011 16:51:45 +0100
Subject: ASoC: imx: fix burstsize for DMA

SSI counts in words, the DMA engine in bytes. (Wrong) factor got removed
in bf974a0 (ASoC i.MX: switch to new DMA api).

Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Acked-by: Liam Girdwood <lrg@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Cc: stable@kernel.org

diff --git a/sound/soc/imx/imx-pcm-dma-mx2.c b/sound/soc/imx/imx-pcm-dma-mx2.c
index b2ed764..aab7765 100644
--- a/sound/soc/imx/imx-pcm-dma-mx2.c
+++ b/sound/soc/imx/imx-pcm-dma-mx2.c
@@ -110,12 +110,12 @@ static int imx_ssi_dma_alloc(struct snd_pcm_substream *substream,
 		slave_config.direction = DMA_TO_DEVICE;
 		slave_config.dst_addr = dma_params->dma_addr;
 		slave_config.dst_addr_width = buswidth;
-		slave_config.dst_maxburst = dma_params->burstsize;
+		slave_config.dst_maxburst = dma_params->burstsize * buswidth;
 	} else {
 		slave_config.direction = DMA_FROM_DEVICE;
 		slave_config.src_addr = dma_params->dma_addr;
 		slave_config.src_addr_width = buswidth;
-		slave_config.src_maxburst = dma_params->burstsize;
+		slave_config.src_maxburst = dma_params->burstsize * buswidth;
 	}
 
 	ret = dmaengine_slave_config(iprtd->dma_chan, &slave_config);
-- 
cgit v0.10.2


From 6b0ae4097c1ebad98c7b33f83b4ca7e93890ed12 Mon Sep 17 00:00:00 2001
From: Mariusz Kozlowski <mk@lab.zgora.pl>
Date: Sat, 26 Mar 2011 19:29:34 +0100
Subject: ceph: fix possible NULL pointer dereference

This patch fixes 'event_work' dereference before it is checked for NULL.

Signed-off-by: Mariusz Kozlowski <mk@lab.zgora.pl>
Signed-off-by: Sage Weil <sage@newdream.net>

diff --git a/net/ceph/osd_client.c b/net/ceph/osd_client.c
index 02212ed..b6776cb 100644
--- a/net/ceph/osd_client.c
+++ b/net/ceph/osd_client.c
@@ -1602,11 +1602,11 @@ void handle_watch_notify(struct ceph_osd_client *osdc, struct ceph_msg *msg)
 	     cookie, ver, event);
 	if (event) {
 		event_work = kmalloc(sizeof(*event_work), GFP_NOIO);
-		INIT_WORK(&event_work->work, do_event_work);
 		if (!event_work) {
 			dout("ERROR: could not allocate event_work\n");
 			goto done_err;
 		}
+		INIT_WORK(&event_work->work, do_event_work);
 		event_work->event = event;
 		event_work->ver = ver;
 		event_work->notify_id = notify_id;
-- 
cgit v0.10.2


From 7b824bbdd6210155bac9e1a1d795f94f8f2927b2 Mon Sep 17 00:00:00 2001
From: Ping Cheng <pinglinux@gmail.com>
Date: Sat, 26 Mar 2011 21:16:04 -0700
Subject: Input: wacom - constify wacom_features for a new missed Bamboo models

Signed-off-by: Ping Cheng <pingc@wacom.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

diff --git a/drivers/input/tablet/wacom_wac.c b/drivers/input/tablet/wacom_wac.c
index 5597637..ba6e17c 100644
--- a/drivers/input/tablet/wacom_wac.c
+++ b/drivers/input/tablet/wacom_wac.c
@@ -1366,23 +1366,23 @@ static const struct wacom_features wacom_features_0xE3 =
 	{ "Wacom ISDv4 E3",       WACOM_PKGLEN_TPC2FG,    26202, 16325,  255,  0, TABLETPC2FG };
 static const struct wacom_features wacom_features_0x47 =
 	{ "Wacom Intuos2 6x8",    WACOM_PKGLEN_INTUOS,    20320, 16240, 1023, 31, INTUOS };
-static struct wacom_features wacom_features_0xD0 =
+static const struct wacom_features wacom_features_0xD0 =
 	{ "Wacom Bamboo 2FG",     WACOM_PKGLEN_BBFUN,     14720,  9200, 1023, 63, BAMBOO_PT };
-static struct wacom_features wacom_features_0xD1 =
+static const struct wacom_features wacom_features_0xD1 =
 	{ "Wacom Bamboo 2FG 4x5", WACOM_PKGLEN_BBFUN,     14720,  9200, 1023, 63, BAMBOO_PT };
-static struct wacom_features wacom_features_0xD2 =
+static const struct wacom_features wacom_features_0xD2 =
 	{ "Wacom Bamboo Craft",   WACOM_PKGLEN_BBFUN,     14720,  9200, 1023, 63, BAMBOO_PT };
-static struct wacom_features wacom_features_0xD3 =
+static const struct wacom_features wacom_features_0xD3 =
 	{ "Wacom Bamboo 2FG 6x8", WACOM_PKGLEN_BBFUN,     21648, 13530, 1023, 63, BAMBOO_PT };
 static const struct wacom_features wacom_features_0xD4 =
 	{ "Wacom Bamboo Pen",     WACOM_PKGLEN_BBFUN,     14720,  9200,  255, 63, BAMBOO_PT };
-static struct wacom_features wacom_features_0xD6 =
+static const struct wacom_features wacom_features_0xD6 =
 	{ "Wacom BambooPT 2FG 4x5", WACOM_PKGLEN_BBFUN,   14720,  9200, 1023, 63, BAMBOO_PT };
-static struct wacom_features wacom_features_0xD7 =
+static const struct wacom_features wacom_features_0xD7 =
 	{ "Wacom BambooPT 2FG Small", WACOM_PKGLEN_BBFUN, 14720,  9200, 1023, 63, BAMBOO_PT };
-static struct wacom_features wacom_features_0xD8 =
+static const struct wacom_features wacom_features_0xD8 =
 	{ "Wacom Bamboo Comic 2FG", WACOM_PKGLEN_BBFUN,   21648, 13530, 1023, 63, BAMBOO_PT };
-static struct wacom_features wacom_features_0xDA =
+static const struct wacom_features wacom_features_0xDA =
 	{ "Wacom Bamboo 2FG 4x5 SE", WACOM_PKGLEN_BBFUN,  14720,  9200, 1023, 63, BAMBOO_PT };
 static struct wacom_features wacom_features_0xDB =
 	{ "Wacom Bamboo 2FG 6x8 SE", WACOM_PKGLEN_BBFUN,  21648, 13530, 1023, 63, BAMBOO_PT };
-- 
cgit v0.10.2


From e35fb8c1db2d6fc92783d492e458d19b06502742 Mon Sep 17 00:00:00 2001
From: Ping Cheng <pinglinux@gmail.com>
Date: Sat, 26 Mar 2011 21:16:05 -0700
Subject: Input: wacom - report resolution for pen devices

Touch resolution is reported to the userland by retrieving the value
from the HID descriptor. But pen resolution is not since it can not
be retrieved. The current Wacom X driver has a resolution table.
To centralize the source of these values, the resolution entries are
added in the wacom_features struct for x and y coordinates respectively.
The values are then reported to the userland.

Signed-off-by: Ping Cheng <pingc@wacom.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

diff --git a/drivers/input/tablet/wacom_wac.c b/drivers/input/tablet/wacom_wac.c
index ba6e17c..c87d94f 100644
--- a/drivers/input/tablet/wacom_wac.c
+++ b/drivers/input/tablet/wacom_wac.c
@@ -16,6 +16,14 @@
 #include "wacom.h"
 #include <linux/input/mt.h>
 
+/* resolution for penabled devices */
+#define WACOM_PL_RES		20
+#define WACOM_PENPRTN_RES	40
+#define WACOM_VOLITO_RES	50
+#define WACOM_GRAPHIRE_RES	80
+#define WACOM_INTUOS_RES	100
+#define WACOM_INTUOS3_RES	200
+
 static int wacom_penpartner_irq(struct wacom_wac *wacom)
 {
 	unsigned char *data = wacom->data;
@@ -1055,6 +1063,19 @@ void wacom_setup_input_capabilities(struct input_dev *input_dev,
 	input_set_abs_params(input_dev, ABS_PRESSURE, 0, features->pressure_max,
 			     features->pressure_fuzz, 0);
 
+	if (features->device_type == BTN_TOOL_PEN) {
+		/* penabled devices have fixed resolution for each model */
+		input_abs_set_res(input_dev, ABS_X, features->x_resolution);
+		input_abs_set_res(input_dev, ABS_Y, features->y_resolution);
+	} else {
+		input_abs_set_res(input_dev, ABS_X,
+			wacom_calculate_touch_res(features->x_max,
+						features->x_phy));
+		input_abs_set_res(input_dev, ABS_Y,
+			wacom_calculate_touch_res(features->y_max,
+						features->y_phy));
+	}
+
 	__set_bit(ABS_MISC, input_dev->absbit);
 
 	switch (wacom_wac->features.type) {
@@ -1171,15 +1192,9 @@ void wacom_setup_input_capabilities(struct input_dev *input_dev,
 	case TABLETPC:
 		__clear_bit(ABS_MISC, input_dev->absbit);
 
-		if (features->device_type != BTN_TOOL_PEN) {
-			input_abs_set_res(input_dev, ABS_X,
-				wacom_calculate_touch_res(features->x_max,
-							features->x_phy));
-			input_abs_set_res(input_dev, ABS_Y,
-				wacom_calculate_touch_res(features->y_max,
-							features->y_phy));
+		if (features->device_type != BTN_TOOL_PEN)
 			break;  /* no need to process stylus stuff */
-		}
+
 		/* fall through */
 
 	case PL:
@@ -1216,12 +1231,6 @@ void wacom_setup_input_capabilities(struct input_dev *input_dev,
 			input_set_abs_params(input_dev, ABS_MT_PRESSURE,
 					     0, features->pressure_max,
 					     features->pressure_fuzz, 0);
-			input_abs_set_res(input_dev, ABS_X,
-				wacom_calculate_touch_res(features->x_max,
-							features->x_phy));
-			input_abs_set_res(input_dev, ABS_Y,
-				wacom_calculate_touch_res(features->y_max,
-							features->y_phy));
 		} else if (features->device_type == BTN_TOOL_PEN) {
 			__set_bit(BTN_TOOL_RUBBER, input_dev->keybit);
 			__set_bit(BTN_TOOL_PEN, input_dev->keybit);
@@ -1233,161 +1242,239 @@ void wacom_setup_input_capabilities(struct input_dev *input_dev,
 }
 
 static const struct wacom_features wacom_features_0x00 =
-	{ "Wacom Penpartner",     WACOM_PKGLEN_PENPRTN,    5040,  3780,  255,  0, PENPARTNER };
+	{ "Wacom Penpartner",     WACOM_PKGLEN_PENPRTN,    5040,  3780,  255,
+	  0, PENPARTNER, WACOM_PENPRTN_RES, WACOM_PENPRTN_RES };
 static const struct wacom_features wacom_features_0x10 =
-	{ "Wacom Graphire",       WACOM_PKGLEN_GRAPHIRE,  10206,  7422,  511, 63, GRAPHIRE };
+	{ "Wacom Graphire",       WACOM_PKGLEN_GRAPHIRE,  10206,  7422,  511,
+	  63, GRAPHIRE, WACOM_GRAPHIRE_RES, WACOM_GRAPHIRE_RES };
 static const struct wacom_features wacom_features_0x11 =
-	{ "Wacom Graphire2 4x5",  WACOM_PKGLEN_GRAPHIRE,  10206,  7422,  511, 63, GRAPHIRE };
+	{ "Wacom Graphire2 4x5",  WACOM_PKGLEN_GRAPHIRE,  10206,  7422,  511,
+	  63, GRAPHIRE, WACOM_GRAPHIRE_RES, WACOM_GRAPHIRE_RES };
 static const struct wacom_features wacom_features_0x12 =
-	{ "Wacom Graphire2 5x7",  WACOM_PKGLEN_GRAPHIRE,  13918, 10206,  511, 63, GRAPHIRE };
+	{ "Wacom Graphire2 5x7",  WACOM_PKGLEN_GRAPHIRE,  13918, 10206,  511,
+	  63, GRAPHIRE, WACOM_GRAPHIRE_RES, WACOM_GRAPHIRE_RES };
 static const struct wacom_features wacom_features_0x13 =
-	{ "Wacom Graphire3",      WACOM_PKGLEN_GRAPHIRE,  10208,  7424,  511, 63, GRAPHIRE };
+	{ "Wacom Graphire3",      WACOM_PKGLEN_GRAPHIRE,  10208,  7424,  511,
+	  63, GRAPHIRE, WACOM_GRAPHIRE_RES, WACOM_GRAPHIRE_RES };
 static const struct wacom_features wacom_features_0x14 =
-	{ "Wacom Graphire3 6x8",  WACOM_PKGLEN_GRAPHIRE,  16704, 12064,  511, 63, GRAPHIRE };
+	{ "Wacom Graphire3 6x8",  WACOM_PKGLEN_GRAPHIRE,  16704, 12064,  511,
+	  63, GRAPHIRE, WACOM_GRAPHIRE_RES, WACOM_GRAPHIRE_RES };
 static const struct wacom_features wacom_features_0x15 =
-	{ "Wacom Graphire4 4x5",  WACOM_PKGLEN_GRAPHIRE,  10208,  7424,  511, 63, WACOM_G4 };
+	{ "Wacom Graphire4 4x5",  WACOM_PKGLEN_GRAPHIRE,  10208,  7424,  511,
+	  63, WACOM_G4, WACOM_GRAPHIRE_RES, WACOM_GRAPHIRE_RES };
 static const struct wacom_features wacom_features_0x16 =
-	{ "Wacom Graphire4 6x8",  WACOM_PKGLEN_GRAPHIRE,  16704, 12064,  511, 63, WACOM_G4 };
+	{ "Wacom Graphire4 6x8",  WACOM_PKGLEN_GRAPHIRE,  16704, 12064,  511,
+	  63, WACOM_G4, WACOM_GRAPHIRE_RES, WACOM_GRAPHIRE_RES };
 static const struct wacom_features wacom_features_0x17 =
-	{ "Wacom BambooFun 4x5",  WACOM_PKGLEN_BBFUN,     14760,  9225,  511, 63, WACOM_MO };
+	{ "Wacom BambooFun 4x5",  WACOM_PKGLEN_BBFUN,     14760,  9225,  511,
+	  63, WACOM_MO, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
 static const struct wacom_features wacom_features_0x18 =
-	{ "Wacom BambooFun 6x8",  WACOM_PKGLEN_BBFUN,     21648, 13530,  511, 63, WACOM_MO };
+	{ "Wacom BambooFun 6x8",  WACOM_PKGLEN_BBFUN,     21648, 13530,  511,
+	  63, WACOM_MO, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
 static const struct wacom_features wacom_features_0x19 =
-	{ "Wacom Bamboo1 Medium", WACOM_PKGLEN_GRAPHIRE,  16704, 12064,  511, 63, GRAPHIRE };
+	{ "Wacom Bamboo1 Medium", WACOM_PKGLEN_GRAPHIRE,  16704, 12064,  511,
+	  63, GRAPHIRE, WACOM_GRAPHIRE_RES, WACOM_GRAPHIRE_RES };
 static const struct wacom_features wacom_features_0x60 =
-	{ "Wacom Volito",         WACOM_PKGLEN_GRAPHIRE,   5104,  3712,  511, 63, GRAPHIRE };
+	{ "Wacom Volito",         WACOM_PKGLEN_GRAPHIRE,   5104,  3712,  511,
+	  63, GRAPHIRE, WACOM_VOLITO_RES, WACOM_VOLITO_RES };
 static const struct wacom_features wacom_features_0x61 =
-	{ "Wacom PenStation2",    WACOM_PKGLEN_GRAPHIRE,   3250,  2320,  255, 63, GRAPHIRE };
+	{ "Wacom PenStation2",    WACOM_PKGLEN_GRAPHIRE,   3250,  2320,  255,
+	  63, GRAPHIRE, WACOM_VOLITO_RES, WACOM_VOLITO_RES };
 static const struct wacom_features wacom_features_0x62 =
-	{ "Wacom Volito2 4x5",    WACOM_PKGLEN_GRAPHIRE,   5104,  3712,  511, 63, GRAPHIRE };
+	{ "Wacom Volito2 4x5",    WACOM_PKGLEN_GRAPHIRE,   5104,  3712,  511,
+	  63, GRAPHIRE, WACOM_VOLITO_RES, WACOM_VOLITO_RES };
 static const struct wacom_features wacom_features_0x63 =
-	{ "Wacom Volito2 2x3",    WACOM_PKGLEN_GRAPHIRE,   3248,  2320,  511, 63, GRAPHIRE };
+	{ "Wacom Volito2 2x3",    WACOM_PKGLEN_GRAPHIRE,   3248,  2320,  511,
+	  63, GRAPHIRE, WACOM_VOLITO_RES, WACOM_VOLITO_RES };
 static const struct wacom_features wacom_features_0x64 =
-	{ "Wacom PenPartner2",    WACOM_PKGLEN_GRAPHIRE,   3250,  2320,  511, 63, GRAPHIRE };
+	{ "Wacom PenPartner2",    WACOM_PKGLEN_GRAPHIRE,   3250,  2320,  511,
+	  63, GRAPHIRE, WACOM_VOLITO_RES, WACOM_VOLITO_RES };
 static const struct wacom_features wacom_features_0x65 =
-	{ "Wacom Bamboo",         WACOM_PKGLEN_BBFUN,     14760,  9225,  511, 63, WACOM_MO };
+	{ "Wacom Bamboo",         WACOM_PKGLEN_BBFUN,     14760,  9225,  511,
+	  63, WACOM_MO, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
 static const struct wacom_features wacom_features_0x69 =
-	{ "Wacom Bamboo1",        WACOM_PKGLEN_GRAPHIRE,   5104,  3712,  511, 63, GRAPHIRE };
+	{ "Wacom Bamboo1",        WACOM_PKGLEN_GRAPHIRE,   5104,  3712,  511,
+	  63, GRAPHIRE, WACOM_PENPRTN_RES, WACOM_PENPRTN_RES };
 static const struct wacom_features wacom_features_0x20 =
-	{ "Wacom Intuos 4x5",     WACOM_PKGLEN_INTUOS,    12700, 10600, 1023, 31, INTUOS };
+	{ "Wacom Intuos 4x5",     WACOM_PKGLEN_INTUOS,    12700, 10600, 1023,
+	  31, INTUOS, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
 static const struct wacom_features wacom_features_0x21 =
-	{ "Wacom Intuos 6x8",     WACOM_PKGLEN_INTUOS,    20320, 16240, 1023, 31, INTUOS };
+	{ "Wacom Intuos 6x8",     WACOM_PKGLEN_INTUOS,    20320, 16240, 1023,
+	  31, INTUOS, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
 static const struct wacom_features wacom_features_0x22 =
-	{ "Wacom Intuos 9x12",    WACOM_PKGLEN_INTUOS,    30480, 24060, 1023, 31, INTUOS };
+	{ "Wacom Intuos 9x12",    WACOM_PKGLEN_INTUOS,    30480, 24060, 1023,
+	  31, INTUOS, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
 static const struct wacom_features wacom_features_0x23 =
-	{ "Wacom Intuos 12x12",   WACOM_PKGLEN_INTUOS,    30480, 31680, 1023, 31, INTUOS };
+	{ "Wacom Intuos 12x12",   WACOM_PKGLEN_INTUOS,    30480, 31680, 1023,
+	  31, INTUOS, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
 static const struct wacom_features wacom_features_0x24 =
-	{ "Wacom Intuos 12x18",   WACOM_PKGLEN_INTUOS,    45720, 31680, 1023, 31, INTUOS };
+	{ "Wacom Intuos 12x18",   WACOM_PKGLEN_INTUOS,    45720, 31680, 1023,
+	  31, INTUOS, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
 static const struct wacom_features wacom_features_0x30 =
-	{ "Wacom PL400",          WACOM_PKGLEN_GRAPHIRE,   5408,  4056,  255,  0, PL };
+	{ "Wacom PL400",          WACOM_PKGLEN_GRAPHIRE,   5408,  4056,  255,
+	  0, PL, WACOM_PL_RES, WACOM_PL_RES };
 static const struct wacom_features wacom_features_0x31 =
-	{ "Wacom PL500",          WACOM_PKGLEN_GRAPHIRE,   6144,  4608,  255,  0, PL };
+	{ "Wacom PL500",          WACOM_PKGLEN_GRAPHIRE,   6144,  4608,  255,
+	  0, PL, WACOM_PL_RES, WACOM_PL_RES };
 static const struct wacom_features wacom_features_0x32 =
-	{ "Wacom PL600",          WACOM_PKGLEN_GRAPHIRE,   6126,  4604,  255,  0, PL };
+	{ "Wacom PL600",          WACOM_PKGLEN_GRAPHIRE,   6126,  4604,  255,
+	  0, PL, WACOM_PL_RES, WACOM_PL_RES };
 static const struct wacom_features wacom_features_0x33 =
-	{ "Wacom PL600SX",        WACOM_PKGLEN_GRAPHIRE,   6260,  5016,  255,  0, PL };
+	{ "Wacom PL600SX",        WACOM_PKGLEN_GRAPHIRE,   6260,  5016,  255,
+	  0, PL, WACOM_PL_RES, WACOM_PL_RES };
 static const struct wacom_features wacom_features_0x34 =
-	{ "Wacom PL550",          WACOM_PKGLEN_GRAPHIRE,   6144,  4608,  511,  0, PL };
+	{ "Wacom PL550",          WACOM_PKGLEN_GRAPHIRE,   6144,  4608,  511,
+	  0, PL, WACOM_PL_RES, WACOM_PL_RES };
 static const struct wacom_features wacom_features_0x35 =
-	{ "Wacom PL800",          WACOM_PKGLEN_GRAPHIRE,   7220,  5780,  511,  0, PL };
+	{ "Wacom PL800",          WACOM_PKGLEN_GRAPHIRE,   7220,  5780,  511,
+	  0, PL, WACOM_PL_RES, WACOM_PL_RES };
 static const struct wacom_features wacom_features_0x37 =
-	{ "Wacom PL700",          WACOM_PKGLEN_GRAPHIRE,   6758,  5406,  511,  0, PL };
+	{ "Wacom PL700",          WACOM_PKGLEN_GRAPHIRE,   6758,  5406,  511,
+	  0, PL, WACOM_PL_RES, WACOM_PL_RES };
 static const struct wacom_features wacom_features_0x38 =
-	{ "Wacom PL510",          WACOM_PKGLEN_GRAPHIRE,   6282,  4762,  511,  0, PL };
+	{ "Wacom PL510",          WACOM_PKGLEN_GRAPHIRE,   6282,  4762,  511,
+	  0, PL, WACOM_PL_RES, WACOM_PL_RES };
 static const struct wacom_features wacom_features_0x39 =
-	{ "Wacom DTU710",         WACOM_PKGLEN_GRAPHIRE,  34080, 27660,  511,  0, PL };
+	{ "Wacom DTU710",         WACOM_PKGLEN_GRAPHIRE,  34080, 27660,  511,
+	  0, PL, WACOM_PL_RES, WACOM_PL_RES };
 static const struct wacom_features wacom_features_0xC4 =
-	{ "Wacom DTF521",         WACOM_PKGLEN_GRAPHIRE,   6282,  4762,  511,  0, PL };
+	{ "Wacom DTF521",         WACOM_PKGLEN_GRAPHIRE,   6282,  4762,  511,
+	  0, PL, WACOM_PL_RES, WACOM_PL_RES };
 static const struct wacom_features wacom_features_0xC0 =
-	{ "Wacom DTF720",         WACOM_PKGLEN_GRAPHIRE,   6858,  5506,  511,  0, PL };
+	{ "Wacom DTF720",         WACOM_PKGLEN_GRAPHIRE,   6858,  5506,  511,
+	  0, PL, WACOM_PL_RES, WACOM_PL_RES };
 static const struct wacom_features wacom_features_0xC2 =
-	{ "Wacom DTF720a",        WACOM_PKGLEN_GRAPHIRE,   6858,  5506,  511,  0, PL };
+	{ "Wacom DTF720a",        WACOM_PKGLEN_GRAPHIRE,   6858,  5506,  511,
+	  0, PL, WACOM_PL_RES, WACOM_PL_RES };
 static const struct wacom_features wacom_features_0x03 =
-	{ "Wacom Cintiq Partner", WACOM_PKGLEN_GRAPHIRE,  20480, 15360,  511,  0, PTU };
+	{ "Wacom Cintiq Partner", WACOM_PKGLEN_GRAPHIRE,  20480, 15360,  511,
+	  0, PTU, WACOM_PL_RES, WACOM_PL_RES };
 static const struct wacom_features wacom_features_0x41 =
-	{ "Wacom Intuos2 4x5",    WACOM_PKGLEN_INTUOS,    12700, 10600, 1023, 31, INTUOS };
+	{ "Wacom Intuos2 4x5",    WACOM_PKGLEN_INTUOS,    12700, 10600, 1023,
+	  31, INTUOS, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
 static const struct wacom_features wacom_features_0x42 =
-	{ "Wacom Intuos2 6x8",    WACOM_PKGLEN_INTUOS,    20320, 16240, 1023, 31, INTUOS };
+	{ "Wacom Intuos2 6x8",    WACOM_PKGLEN_INTUOS,    20320, 16240, 1023,
+	  31, INTUOS, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
 static const struct wacom_features wacom_features_0x43 =
-	{ "Wacom Intuos2 9x12",   WACOM_PKGLEN_INTUOS,    30480, 24060, 1023, 31, INTUOS };
+	{ "Wacom Intuos2 9x12",   WACOM_PKGLEN_INTUOS,    30480, 24060, 1023,
+	  31, INTUOS, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
 static const struct wacom_features wacom_features_0x44 =
-	{ "Wacom Intuos2 12x12",  WACOM_PKGLEN_INTUOS,    30480, 31680, 1023, 31, INTUOS };
+	{ "Wacom Intuos2 12x12",  WACOM_PKGLEN_INTUOS,    30480, 31680, 1023,
+	  31, INTUOS, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
 static const struct wacom_features wacom_features_0x45 =
-	{ "Wacom Intuos2 12x18",  WACOM_PKGLEN_INTUOS,    45720, 31680, 1023, 31, INTUOS };
+	{ "Wacom Intuos2 12x18",  WACOM_PKGLEN_INTUOS,    45720, 31680, 1023,
+	  31, INTUOS, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
 static const struct wacom_features wacom_features_0xB0 =
-	{ "Wacom Intuos3 4x5",    WACOM_PKGLEN_INTUOS,    25400, 20320, 1023, 63, INTUOS3S };
+	{ "Wacom Intuos3 4x5",    WACOM_PKGLEN_INTUOS,    25400, 20320, 1023,
+	  63, INTUOS3S, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES };
 static const struct wacom_features wacom_features_0xB1 =
-	{ "Wacom Intuos3 6x8",    WACOM_PKGLEN_INTUOS,    40640, 30480, 1023, 63, INTUOS3 };
+	{ "Wacom Intuos3 6x8",    WACOM_PKGLEN_INTUOS,    40640, 30480, 1023,
+	  63, INTUOS3, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES };
 static const struct wacom_features wacom_features_0xB2 =
-	{ "Wacom Intuos3 9x12",   WACOM_PKGLEN_INTUOS,    60960, 45720, 1023, 63, INTUOS3 };
+	{ "Wacom Intuos3 9x12",   WACOM_PKGLEN_INTUOS,    60960, 45720, 1023,
+	  63, INTUOS3, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES };
 static const struct wacom_features wacom_features_0xB3 =
-	{ "Wacom Intuos3 12x12",  WACOM_PKGLEN_INTUOS,    60960, 60960, 1023, 63, INTUOS3L };
+	{ "Wacom Intuos3 12x12",  WACOM_PKGLEN_INTUOS,    60960, 60960, 1023,
+	  63, INTUOS3L, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES };
 static const struct wacom_features wacom_features_0xB4 =
-	{ "Wacom Intuos3 12x19",  WACOM_PKGLEN_INTUOS,    97536, 60960, 1023, 63, INTUOS3L };
+	{ "Wacom Intuos3 12x19",  WACOM_PKGLEN_INTUOS,    97536, 60960, 1023,
+	  63, INTUOS3L, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES };
 static const struct wacom_features wacom_features_0xB5 =
-	{ "Wacom Intuos3 6x11",   WACOM_PKGLEN_INTUOS,    54204, 31750, 1023, 63, INTUOS3 };
+	{ "Wacom Intuos3 6x11",   WACOM_PKGLEN_INTUOS,    54204, 31750, 1023,
+	  63, INTUOS3, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES };
 static const struct wacom_features wacom_features_0xB7 =
-	{ "Wacom Intuos3 4x6",    WACOM_PKGLEN_INTUOS,    31496, 19685, 1023, 63, INTUOS3S };
+	{ "Wacom Intuos3 4x6",    WACOM_PKGLEN_INTUOS,    31496, 19685, 1023,
+	  63, INTUOS3S, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES };
 static const struct wacom_features wacom_features_0xB8 =
-	{ "Wacom Intuos4 4x6",    WACOM_PKGLEN_INTUOS,    31496, 19685, 2047, 63, INTUOS4S };
+	{ "Wacom Intuos4 4x6",    WACOM_PKGLEN_INTUOS,    31496, 19685, 2047,
+	  63, INTUOS4S, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES };
 static const struct wacom_features wacom_features_0xB9 =
-	{ "Wacom Intuos4 6x9",    WACOM_PKGLEN_INTUOS,    44704, 27940, 2047, 63, INTUOS4 };
+	{ "Wacom Intuos4 6x9",    WACOM_PKGLEN_INTUOS,    44704, 27940, 2047,
+	  63, INTUOS4, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES };
 static const struct wacom_features wacom_features_0xBA =
-	{ "Wacom Intuos4 8x13",   WACOM_PKGLEN_INTUOS,    65024, 40640, 2047, 63, INTUOS4L };
+	{ "Wacom Intuos4 8x13",   WACOM_PKGLEN_INTUOS,    65024, 40640, 2047,
+	  63, INTUOS4L, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES };
 static const struct wacom_features wacom_features_0xBB =
-	{ "Wacom Intuos4 12x19",  WACOM_PKGLEN_INTUOS,    97536, 60960, 2047, 63, INTUOS4L };
+	{ "Wacom Intuos4 12x19",  WACOM_PKGLEN_INTUOS,    97536, 60960, 2047,
+	  63, INTUOS4L, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES };
 static const struct wacom_features wacom_features_0xBC =
-	{ "Wacom Intuos4 WL",     WACOM_PKGLEN_INTUOS,    40840, 25400, 2047, 63, INTUOS4 };
+	{ "Wacom Intuos4 WL",     WACOM_PKGLEN_INTUOS,    40840, 25400, 2047,
+	  63, INTUOS4, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES };
 static const struct wacom_features wacom_features_0x3F =
-	{ "Wacom Cintiq 21UX",    WACOM_PKGLEN_INTUOS,    87200, 65600, 1023, 63, CINTIQ };
+	{ "Wacom Cintiq 21UX",    WACOM_PKGLEN_INTUOS,    87200, 65600, 1023,
+	  63, CINTIQ, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES };
 static const struct wacom_features wacom_features_0xC5 =
-	{ "Wacom Cintiq 20WSX",   WACOM_PKGLEN_INTUOS,    86680, 54180, 1023, 63, WACOM_BEE };
+	{ "Wacom Cintiq 20WSX",   WACOM_PKGLEN_INTUOS,    86680, 54180, 1023,
+	  63, WACOM_BEE, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES };
 static const struct wacom_features wacom_features_0xC6 =
-	{ "Wacom Cintiq 12WX",    WACOM_PKGLEN_INTUOS,    53020, 33440, 1023, 63, WACOM_BEE };
+	{ "Wacom Cintiq 12WX",    WACOM_PKGLEN_INTUOS,    53020, 33440, 1023,
+	  63, WACOM_BEE, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES };
 static const struct wacom_features wacom_features_0xC7 =
-	{ "Wacom DTU1931",        WACOM_PKGLEN_GRAPHIRE,  37832, 30305,  511,  0, PL };
+	{ "Wacom DTU1931",        WACOM_PKGLEN_GRAPHIRE,  37832, 30305,  511,
+	  0, PL, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
 static const struct wacom_features wacom_features_0xCE =
-	{ "Wacom DTU2231",        WACOM_PKGLEN_GRAPHIRE,  47864, 27011,  511,  0, DTU };
+	{ "Wacom DTU2231",        WACOM_PKGLEN_GRAPHIRE,  47864, 27011,  511,
+	  0, DTU, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
 static const struct wacom_features wacom_features_0xF0 =
-	{ "Wacom DTU1631",        WACOM_PKGLEN_GRAPHIRE,  34623, 19553,  511,  0, DTU };
+	{ "Wacom DTU1631",        WACOM_PKGLEN_GRAPHIRE,  34623, 19553,  511,
+	  0, DTU, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
 static const struct wacom_features wacom_features_0xCC =
-	{ "Wacom Cintiq 21UX2",   WACOM_PKGLEN_INTUOS,    87200, 65600, 2047, 63, WACOM_21UX2 };
+	{ "Wacom Cintiq 21UX2",   WACOM_PKGLEN_INTUOS,    87200, 65600, 2047,
+	  63, WACOM_21UX2, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES };
 static const struct wacom_features wacom_features_0x90 =
-	{ "Wacom ISDv4 90",       WACOM_PKGLEN_GRAPHIRE,  26202, 16325,  255,  0, TABLETPC };
+	{ "Wacom ISDv4 90",       WACOM_PKGLEN_GRAPHIRE,  26202, 16325,  255,
+	  0, TABLETPC, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
 static const struct wacom_features wacom_features_0x93 =
-	{ "Wacom ISDv4 93",       WACOM_PKGLEN_GRAPHIRE,  26202, 16325,  255,  0, TABLETPC };
+	{ "Wacom ISDv4 93",       WACOM_PKGLEN_GRAPHIRE,  26202, 16325,  255,
+	  0, TABLETPC, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
 static const struct wacom_features wacom_features_0x9A =
-	{ "Wacom ISDv4 9A",       WACOM_PKGLEN_GRAPHIRE,  26202, 16325,  255,  0, TABLETPC };
+	{ "Wacom ISDv4 9A",       WACOM_PKGLEN_GRAPHIRE,  26202, 16325,  255,
+	  0, TABLETPC, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
 static const struct wacom_features wacom_features_0x9F =
-	{ "Wacom ISDv4 9F",       WACOM_PKGLEN_GRAPHIRE,  26202, 16325,  255,  0, TABLETPC };
+	{ "Wacom ISDv4 9F",       WACOM_PKGLEN_GRAPHIRE,  26202, 16325,  255,
+	  0, TABLETPC, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
 static const struct wacom_features wacom_features_0xE2 =
-	{ "Wacom ISDv4 E2",       WACOM_PKGLEN_TPC2FG,    26202, 16325,  255,  0, TABLETPC2FG };
+	{ "Wacom ISDv4 E2",       WACOM_PKGLEN_TPC2FG,    26202, 16325,  255,
+	  0, TABLETPC2FG, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
 static const struct wacom_features wacom_features_0xE3 =
-	{ "Wacom ISDv4 E3",       WACOM_PKGLEN_TPC2FG,    26202, 16325,  255,  0, TABLETPC2FG };
+	{ "Wacom ISDv4 E3",       WACOM_PKGLEN_TPC2FG,    26202, 16325,  255,
+	  0, TABLETPC2FG, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
 static const struct wacom_features wacom_features_0x47 =
-	{ "Wacom Intuos2 6x8",    WACOM_PKGLEN_INTUOS,    20320, 16240, 1023, 31, INTUOS };
+	{ "Wacom Intuos2 6x8",    WACOM_PKGLEN_INTUOS,    20320, 16240, 1023,
+	  31, INTUOS, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
 static const struct wacom_features wacom_features_0xD0 =
-	{ "Wacom Bamboo 2FG",     WACOM_PKGLEN_BBFUN,     14720,  9200, 1023, 63, BAMBOO_PT };
+	{ "Wacom Bamboo 2FG",     WACOM_PKGLEN_BBFUN,     14720,  9200, 1023,
+	  63, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
 static const struct wacom_features wacom_features_0xD1 =
-	{ "Wacom Bamboo 2FG 4x5", WACOM_PKGLEN_BBFUN,     14720,  9200, 1023, 63, BAMBOO_PT };
+	{ "Wacom Bamboo 2FG 4x5", WACOM_PKGLEN_BBFUN,     14720,  9200, 1023,
+	  63, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
 static const struct wacom_features wacom_features_0xD2 =
-	{ "Wacom Bamboo Craft",   WACOM_PKGLEN_BBFUN,     14720,  9200, 1023, 63, BAMBOO_PT };
+	{ "Wacom Bamboo Craft",   WACOM_PKGLEN_BBFUN,     14720,  9200, 1023,
+	  63, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
 static const struct wacom_features wacom_features_0xD3 =
-	{ "Wacom Bamboo 2FG 6x8", WACOM_PKGLEN_BBFUN,     21648, 13530, 1023, 63, BAMBOO_PT };
+	{ "Wacom Bamboo 2FG 6x8", WACOM_PKGLEN_BBFUN,     21648, 13530, 1023,
+	  63, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
 static const struct wacom_features wacom_features_0xD4 =
-	{ "Wacom Bamboo Pen",     WACOM_PKGLEN_BBFUN,     14720,  9200,  255, 63, BAMBOO_PT };
+	{ "Wacom Bamboo Pen",     WACOM_PKGLEN_BBFUN,     14720,  9200,  255,
+	  63, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
 static const struct wacom_features wacom_features_0xD6 =
-	{ "Wacom BambooPT 2FG 4x5", WACOM_PKGLEN_BBFUN,   14720,  9200, 1023, 63, BAMBOO_PT };
+	{ "Wacom BambooPT 2FG 4x5", WACOM_PKGLEN_BBFUN,   14720,  9200, 1023,
+	  63, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
 static const struct wacom_features wacom_features_0xD7 =
-	{ "Wacom BambooPT 2FG Small", WACOM_PKGLEN_BBFUN, 14720,  9200, 1023, 63, BAMBOO_PT };
+	{ "Wacom BambooPT 2FG Small", WACOM_PKGLEN_BBFUN, 14720,  9200, 1023,
+	  63, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
 static const struct wacom_features wacom_features_0xD8 =
-	{ "Wacom Bamboo Comic 2FG", WACOM_PKGLEN_BBFUN,   21648, 13530, 1023, 63, BAMBOO_PT };
+	{ "Wacom Bamboo Comic 2FG", WACOM_PKGLEN_BBFUN,   21648, 13530, 1023,
+	  63, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
 static const struct wacom_features wacom_features_0xDA =
-	{ "Wacom Bamboo 2FG 4x5 SE", WACOM_PKGLEN_BBFUN,  14720,  9200, 1023, 63, BAMBOO_PT };
+	{ "Wacom Bamboo 2FG 4x5 SE", WACOM_PKGLEN_BBFUN,  14720,  9200, 1023,
+	  63, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
 static struct wacom_features wacom_features_0xDB =
-	{ "Wacom Bamboo 2FG 6x8 SE", WACOM_PKGLEN_BBFUN,  21648, 13530, 1023, 63, BAMBOO_PT };
+	{ "Wacom Bamboo 2FG 6x8 SE", WACOM_PKGLEN_BBFUN,  21648, 13530, 1023,
+	  63, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
 static const struct wacom_features wacom_features_0x6004 =
-	{ "ISD-V4",               WACOM_PKGLEN_GRAPHIRE,  12800, 8000, 255, 0, TABLETPC };
+	{ "ISD-V4",               WACOM_PKGLEN_GRAPHIRE,  12800,  8000,  255,
+	  0, TABLETPC, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
 
 #define USB_DEVICE_WACOM(prod)					\
 	USB_DEVICE(USB_VENDOR_ID_WACOM, prod),			\
diff --git a/drivers/input/tablet/wacom_wac.h b/drivers/input/tablet/wacom_wac.h
index 835f756..53eb71b 100644
--- a/drivers/input/tablet/wacom_wac.h
+++ b/drivers/input/tablet/wacom_wac.h
@@ -74,6 +74,8 @@ struct wacom_features {
 	int pressure_max;
 	int distance_max;
 	int type;
+	int x_resolution;
+	int y_resolution;
 	int device_type;
 	int x_phy;
 	int y_phy;
-- 
cgit v0.10.2


From d51ca07634b8a441f731e087e93775a67d629a8c Mon Sep 17 00:00:00 2001
From: Sylvestre Ledru <sylvestre.ledru@scilab.org>
Date: Sat, 26 Mar 2011 22:52:25 -0700
Subject: Input: h3600_ts_input - fix a spelling error

Signed-off-by: Sylvestre Ledru <sylvestre.ledru@scilab.org>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

diff --git a/drivers/input/touchscreen/h3600_ts_input.c b/drivers/input/touchscreen/h3600_ts_input.c
index b4d7f63..efa0688 100644
--- a/drivers/input/touchscreen/h3600_ts_input.c
+++ b/drivers/input/touchscreen/h3600_ts_input.c
@@ -62,7 +62,7 @@ MODULE_LICENSE("GPL");
         Programmer has no control over these numbers.
         TODO there are holes - specifically  1,7,0x0a
 */
-#define VERSION_ID              0       /* Get Version (request/respose) */
+#define VERSION_ID              0       /* Get Version (request/response) */
 #define KEYBD_ID                2       /* Keyboard (event) */
 #define TOUCHS_ID               3       /* Touch Screen (event)*/
 #define EEPROM_READ_ID          4       /* (request/response) */
-- 
cgit v0.10.2


From dc7b602dd481cad61fc4f18874bbdc5b04b5ee3e Mon Sep 17 00:00:00 2001
From: Konstantin Porotchkin <kostap@marvell.com>
Date: Sun, 27 Mar 2011 11:54:49 +0200
Subject: Fix the broken build for Marvell Dove platform.

Remove call to the old GPIO init function.
Fix old MPP control offset value.

Signed-off-by: Konstantin Porotchkin <kostap@marvell.com>
Acked-by: Saeed Bishara <saeed.bishara@gmail.com>
Signed-off-by: Nicolas Pitre <nico@fluxnic.net>

diff --git a/arch/arm/mach-dove/include/mach/dove.h b/arch/arm/mach-dove/include/mach/dove.h
index e5fcdd3..b20ec9a 100644
--- a/arch/arm/mach-dove/include/mach/dove.h
+++ b/arch/arm/mach-dove/include/mach/dove.h
@@ -136,7 +136,7 @@
 #define DOVE_MPP_GENERAL_VIRT_BASE	(DOVE_SB_REGS_VIRT_BASE | 0xe803c)
 #define  DOVE_AU1_SPDIFO_GPIO_EN	(1 << 1)
 #define  DOVE_NAND_GPIO_EN		(1 << 0)
-#define DOVE_MPP_CTRL4_VIRT_BASE	(DOVE_GPIO_VIRT_BASE + 0x40)
+#define DOVE_MPP_CTRL4_VIRT_BASE	(DOVE_GPIO_LO_VIRT_BASE + 0x40)
 #define  DOVE_SPI_GPIO_SEL		(1 << 5)
 #define  DOVE_UART1_GPIO_SEL		(1 << 4)
 #define  DOVE_AU1_GPIO_SEL		(1 << 3)
diff --git a/arch/arm/mach-dove/mpp.c b/arch/arm/mach-dove/mpp.c
index 71db2bd..c66c763 100644
--- a/arch/arm/mach-dove/mpp.c
+++ b/arch/arm/mach-dove/mpp.c
@@ -147,9 +147,6 @@ void __init dove_mpp_conf(unsigned int *mpp_list)
 	u32 pmu_sig_ctrl[PMU_SIG_REGS];
 	int i;
 
-	/* Initialize gpiolib. */
-	orion_gpio_init();
-
 	for (i = 0; i < MPP_NR_REGS; i++)
 		mpp_ctrl[i] = readl(MPP_CTRL(i));
 
-- 
cgit v0.10.2


From c6b358748e19ce7e230b0926ac42696bc485a562 Mon Sep 17 00:00:00 2001
From: Takashi Iwai <tiwai@suse.de>
Date: Mon, 28 Mar 2011 12:05:31 +0200
Subject: ALSA: hda - Fix pin-config of Gigabyte mobo

Use pin-fix instead of the static quirk for Gigabyte mobos 1458:a002.

Bugzilla: https://bugzilla.novell.com/show_bug.cgi?id=677256
Signed-off-by: Takashi Iwai <tiwai@suse.de>

diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c
index 0ef0035..12c6f45 100644
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -9863,7 +9863,6 @@ static struct snd_pci_quirk alc882_cfg_tbl[] = {
 	SND_PCI_QUIRK(0x1071, 0x8258, "Evesham Voyaeger", ALC883_LAPTOP_EAPD),
 	SND_PCI_QUIRK(0x10f1, 0x2350, "TYAN-S2350", ALC888_6ST_DELL),
 	SND_PCI_QUIRK(0x108e, 0x534d, NULL, ALC883_3ST_6ch),
-	SND_PCI_QUIRK(0x1458, 0xa002, "Gigabyte P35 DS3R", ALC882_6ST_DIG),
 
 	SND_PCI_QUIRK(0x1462, 0x0349, "MSI", ALC883_TARGA_2ch_DIG),
 	SND_PCI_QUIRK(0x1462, 0x040d, "MSI", ALC883_TARGA_2ch_DIG),
@@ -10700,6 +10699,7 @@ enum {
 	PINFIX_LENOVO_Y530,
 	PINFIX_PB_M5210,
 	PINFIX_ACER_ASPIRE_7736,
+	PINFIX_GIGABYTE_880GM,
 };
 
 static const struct alc_fixup alc882_fixups[] = {
@@ -10731,6 +10731,13 @@ static const struct alc_fixup alc882_fixups[] = {
 		.type = ALC_FIXUP_SKU,
 		.v.sku = ALC_FIXUP_SKU_IGNORE,
 	},
+	[PINFIX_GIGABYTE_880GM] = {
+		.type = ALC_FIXUP_PINS,
+		.v.pins = (const struct alc_pincfg[]) {
+			{ 0x14, 0x1114410 }, /* set as speaker */
+			{ }
+		}
+	},
 };
 
 static struct snd_pci_quirk alc882_fixup_tbl[] = {
@@ -10738,6 +10745,7 @@ static struct snd_pci_quirk alc882_fixup_tbl[] = {
 	SND_PCI_QUIRK(0x17aa, 0x3a0d, "Lenovo Y530", PINFIX_LENOVO_Y530),
 	SND_PCI_QUIRK(0x147b, 0x107a, "Abit AW9D-MAX", PINFIX_ABIT_AW9D_MAX),
 	SND_PCI_QUIRK(0x1025, 0x0296, "Acer Aspire 7736z", PINFIX_ACER_ASPIRE_7736),
+	SND_PCI_QUIRK(0x1458, 0xa002, "Gigabyte", PINFIX_GIGABYTE_880GM),
 	{}
 };
 
@@ -18774,8 +18782,6 @@ static struct snd_pci_quirk alc662_cfg_tbl[] = {
 		      ALC662_3ST_6ch_DIG),
 	SND_PCI_QUIRK(0x1179, 0xff6e, "Toshiba NB20x", ALC662_AUTO),
 	SND_PCI_QUIRK(0x144d, 0xca00, "Samsung NC10", ALC272_SAMSUNG_NC10),
-	SND_PCI_QUIRK(0x1458, 0xa002, "Gigabyte 945GCM-S2L",
-		      ALC662_3ST_6ch_DIG),
 	SND_PCI_QUIRK(0x152d, 0x2304, "Quanta WH1", ALC663_ASUS_H13),
 	SND_PCI_QUIRK(0x1565, 0x820f, "Biostar TA780G M2+", ALC662_3ST_6ch_DIG),
 	SND_PCI_QUIRK(0x1631, 0xc10c, "PB RS65", ALC663_ASUS_M51VA),
@@ -19449,6 +19455,7 @@ enum {
 	ALC662_FIXUP_IDEAPAD,
 	ALC272_FIXUP_MARIO,
 	ALC662_FIXUP_CZC_P10T,
+	ALC662_FIXUP_GIGABYTE,
 };
 
 static const struct alc_fixup alc662_fixups[] = {
@@ -19477,12 +19484,20 @@ static const struct alc_fixup alc662_fixups[] = {
 			{}
 		}
 	},
+	[ALC662_FIXUP_GIGABYTE] = {
+		.type = ALC_FIXUP_PINS,
+		.v.pins = (const struct alc_pincfg[]) {
+			{ 0x14, 0x1114410 }, /* set as speaker */
+			{ }
+		}
+	},
 };
 
 static struct snd_pci_quirk alc662_fixup_tbl[] = {
 	SND_PCI_QUIRK(0x1025, 0x0308, "Acer Aspire 8942G", ALC662_FIXUP_ASPIRE),
 	SND_PCI_QUIRK(0x1025, 0x038b, "Acer Aspire 8943G", ALC662_FIXUP_ASPIRE),
 	SND_PCI_QUIRK(0x144d, 0xc051, "Samsung R720", ALC662_FIXUP_IDEAPAD),
+	SND_PCI_QUIRK(0x1458, 0xa002, "Gigabyte", ALC662_FIXUP_GIGABYTE),
 	SND_PCI_QUIRK(0x17aa, 0x38af, "Lenovo Ideapad Y550P", ALC662_FIXUP_IDEAPAD),
 	SND_PCI_QUIRK(0x17aa, 0x3a0d, "Lenovo Ideapad Y550", ALC662_FIXUP_IDEAPAD),
 	SND_PCI_QUIRK(0x1b35, 0x2206, "CZC P10T", ALC662_FIXUP_CZC_P10T),
-- 
cgit v0.10.2


From ccd0d44fad38dc1bb4b26dcc7a30e9f2c3b36870 Mon Sep 17 00:00:00 2001
From: Steven Rostedt <srostedt@redhat.com>
Date: Fri, 25 Mar 2011 16:21:06 -0400
Subject: WARN_ON_SMP(): Add comment to explain ({0;})

The define to use ({0;}) for the !CONFIG_SMP case of WARN_ON_SMP()
can be confusing. As the WARN_ON_SMP() needs to be a nop when
CONFIG_SMP is not set, including all its parameters must not be
evaluated, and that it must work as both a stand alone statement
and inside an if condition, we define it to a funky ({0;}).

A simple "0" will not work as it causes gcc to give the warning that
the statement has no effect.

As this strange definition has raised a few eyebrows from some
major kernel developers, it is wise to document why we create such
a work of art.

Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

diff --git a/include/asm-generic/bug.h b/include/asm-generic/bug.h
index f2d2faf..e5a3f58 100644
--- a/include/asm-generic/bug.h
+++ b/include/asm-generic/bug.h
@@ -194,6 +194,13 @@ extern void warn_slowpath_null(const char *file, const int line);
 #ifdef CONFIG_SMP
 # define WARN_ON_SMP(x)			WARN_ON(x)
 #else
+/*
+ * Use of ({0;}) because WARN_ON_SMP(x) may be used either as
+ * a stand alone line statement or as a condition in an if ()
+ * statement.
+ * A simple "0" would cause gcc to give a "statement has no effect"
+ * warning.
+ */
 # define WARN_ON_SMP(x)			({0;})
 #endif
 
-- 
cgit v0.10.2


From 6c6804fb2cef2d6aceb38b0eb0803210d77ff390 Mon Sep 17 00:00:00 2001
From: Andrew Lutomirski <luto@mit.edu>
Date: Thu, 24 Mar 2011 00:36:56 -0400
Subject: perf symbols: Fix vsyscall symbol lookup

Perf can't currently trace into the vsyscall page.  It looks like it was
meant to work.

Tested on 2.6.38 and today's -git.

The bug is easy to reproduce.  Compile this:

int main()
{
	int i;
	struct timespec t;
	for(i = 0; i < 10000000; i++)
		clock_gettime(CLOCK_MONOTONIC, &t);
	return 0;
}

and run it through perf record; perf report.  The top entry shows
"[unknown]" and you can't zoom in.

It looks like there are two issues.  The first is a that a test for user
mode executing in kernel space is backwards.  (That's the first hunk
below).  The second (I think) is that something's wrong with the code
that generates lots of little struct dso objects for different sections
-- when it runs on vmlinux it results in bogus long_name values which
cause objdump to fail.

Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
LPU-Reference: <AANLkTikxSw5+wJZUWNz++nL7mgivCh_Zf=2Kq6=f9Ce_@mail.gmail.com>
Signed-off-by: Andy Lutomirski <luto@mit.edu>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

diff --git a/tools/perf/util/event.c b/tools/perf/util/event.c
index 2b15c36..1023f67 100644
--- a/tools/perf/util/event.c
+++ b/tools/perf/util/event.c
@@ -710,7 +710,7 @@ try_again:
 		 * in the whole kernel symbol list.
 		 */
 		if ((long long)al->addr < 0 &&
-		    cpumode == PERF_RECORD_MISC_KERNEL &&
+		    cpumode == PERF_RECORD_MISC_USER &&
 		    machine && mg != &machine->kmaps) {
 			mg = &machine->kmaps;
 			goto try_again;
diff --git a/tools/perf/util/symbol.c b/tools/perf/util/symbol.c
index 17df793..8f73907 100644
--- a/tools/perf/util/symbol.c
+++ b/tools/perf/util/symbol.c
@@ -1196,6 +1196,8 @@ static int dso__load_sym(struct dso *self, struct map *map, const char *name,
 				if (curr_dso == NULL)
 					goto out_elf_end;
 				curr_dso->kernel = self->kernel;
+				curr_dso->long_name = self->long_name;
+				curr_dso->long_name_len = self->long_name_len;
 				curr_map = map__new2(start, curr_dso,
 						     map->type);
 				if (curr_map == NULL) {
@@ -1842,6 +1844,7 @@ int dso__load_vmlinux(struct dso *self, struct map *map,
 	if (fd < 0)
 		return -1;
 
+	dso__set_long_name(self, (char *)vmlinux);
 	dso__set_loaded(self, map->type);
 	err = dso__load_sym(self, map, symfs_vmlinux, fd, filter, 0, 0);
 	close(fd);
-- 
cgit v0.10.2


From 0652f067360fc3be2c3e668085f5fb2b76402928 Mon Sep 17 00:00:00 2001
From: Viktor Rosendahl <viktor.rosendahl@nokia.com>
Date: Sat, 26 Mar 2011 18:11:01 +0100
Subject: ARM: 6836/1: kprobes/fix emulation of LDR/STR instruction when Rn ==
 PC

The Rn value from the emulation is unconditionally written back;
this is fine as long as Rn != PC because in that case, even if the
instruction isn't a write back instruction, it will only result in the
same value being written back.

In case Rn == PC, then the emulated instruction doesn't have the
actual PC value in Rn but an adjusted value; when this is written
back, it will result in the PC being incorrectly updated.

An altenative solution would be to check bits 24 and 22 to see whether
the instruction actually is a write back instruction or not. I think
it's enough to check whether Rn != PC,  because:
- it's looks cheaper than the alternative
- to my understaning it's not permitted to update the PC with a write
back instruction, so we don't lose any ability to emulate legal
instructions.
- in case of writing back for non write back instructions where Rn != PC, it doesn't matter because the values are the same.

Regarding the second point above, it would possibly be prudent to add
some checking to prep_emulate_ldr_str(), so that instructions with
both write back and Rn == PC would be rejected.

Signed-off-by: Viktor Rosendahl <viktor.rosendahl@nokia.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

diff --git a/arch/arm/kernel/kprobes-decode.c b/arch/arm/kernel/kprobes-decode.c
index 8f6ed43..2389131 100644
--- a/arch/arm/kernel/kprobes-decode.c
+++ b/arch/arm/kernel/kprobes-decode.c
@@ -594,7 +594,8 @@ static void __kprobes emulate_ldr(struct kprobe *p, struct pt_regs *regs)
 	long cpsr = regs->ARM_cpsr;
 
 	fnr.dr = insnslot_llret_3arg_rflags(rnv, 0, rmv, cpsr, i_fn);
-	regs->uregs[rn] = fnr.r0;  /* Save Rn in case of writeback. */
+	if (rn != 15)
+		regs->uregs[rn] = fnr.r0;  /* Save Rn in case of writeback. */
 	rdv = fnr.r1;
 
 	if (rd == 15) {
@@ -622,10 +623,11 @@ static void __kprobes emulate_str(struct kprobe *p, struct pt_regs *regs)
 	long rdv = (rd == 15) ? iaddr + str_pc_offset : regs->uregs[rd];
 	long rnv = (rn == 15) ? iaddr +  8 : regs->uregs[rn];
 	long rmv = regs->uregs[rm];  /* rm/rmv may be invalid, don't care. */
+	long rnv_wb;
 
-	/* Save Rn in case of writeback. */
-	regs->uregs[rn] =
-		insnslot_3arg_rflags(rnv, rdv, rmv, regs->ARM_cpsr, i_fn);
+	rnv_wb = insnslot_3arg_rflags(rnv, rdv, rmv, regs->ARM_cpsr, i_fn);
+	if (rn != 15)
+		regs->uregs[rn] = rnv_wb;  /* Save Rn in case of writeback. */
 }
 
 static void __kprobes emulate_mrrc(struct kprobe *p, struct pt_regs *regs)
-- 
cgit v0.10.2


From 7f479c64a52094354c10309fcacaa71de015dc9e Mon Sep 17 00:00:00 2001
From: Colin Cross <ccross@android.com>
Date: Sun, 27 Mar 2011 00:45:25 +0100
Subject: ARM: 6837/1: remove unused pci_fixup_prpmc1100

The PrPMC1100 machine was removed in 2.6.11, but left a reference to machine_is_prpmc1100 in arch/arm/kernel/bios32.c.  6f82f4db80189281a8ac42f2e72396accb719b57 removed the machine type, which causes a build failure:

CC      arch/arm/kernel/bios32.o
arch/arm/kernel/bios32.c: In function 'pci_fixup_prpmc1100':
arch/arm/kernel/bios32.c:174: error: implicit declaration of function 'machine_is_prpmc1100'

Remove the unused pci_fixup_prpcm1100.

Signed-off-by: Colin Cross <ccross@android.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

diff --git a/arch/arm/kernel/bios32.c b/arch/arm/kernel/bios32.c
index d86fcd4..e4ee050 100644
--- a/arch/arm/kernel/bios32.c
+++ b/arch/arm/kernel/bios32.c
@@ -159,31 +159,6 @@ static void __devinit pci_fixup_dec21285(struct pci_dev *dev)
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_DEC, PCI_DEVICE_ID_DEC_21285, pci_fixup_dec21285);
 
 /*
- * Same as above. The PrPMC800 carrier board for the PrPMC1100 
- * card maps the host-bridge @ 00:01:00 for some reason and it
- * ends up getting scanned. Note that we only want to do this
- * fixup when we find the IXP4xx on a PrPMC system, which is why
- * we check the machine type. We could be running on a board
- * with an IXP4xx target device and we don't want to kill the
- * resources in that case.
- */
-static void __devinit pci_fixup_prpmc1100(struct pci_dev *dev)
-{
-	int i;
-
-	if (machine_is_prpmc1100()) {
-		dev->class &= 0xff;
-		dev->class |= PCI_CLASS_BRIDGE_HOST << 8;
-		for (i = 0; i < PCI_NUM_RESOURCES; i++) {
-			dev->resource[i].start = 0;
-			dev->resource[i].end   = 0;
-			dev->resource[i].flags = 0;
-		}
-	}
-}
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_IXP4XX, pci_fixup_prpmc1100);
-
-/*
  * PCI IDE controllers use non-standard I/O port decoding, respect it.
  */
 static void __devinit pci_fixup_ide_bases(struct pci_dev *dev)
-- 
cgit v0.10.2


From 8e8806990cfd91a4ec25df6f00528008c4b0087a Mon Sep 17 00:00:00 2001
From: Ming Lei <tom.leiming@gmail.com>
Date: Mon, 28 Mar 2011 06:10:25 +0100
Subject: ARM: 6838/1: etm: fix section mismatch warning

The patch fixes the warning below:

WARNING: arch/arm/kernel/built-in.o(.data+0x27c): Section mismatch in reference from the variable etb_driver to the function .init.text:etb_probe()
The variable etb_driver references
the function __init etb_probe()
If the reference is valid then annotate the
variable with __init* or __refdata (see linux/init.h) or name the variable:
*_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console,

WARNING: arch/arm/kernel/built-in.o(.data+0x2cc): Section mismatch in reference from the variable etm_driver to the function .init.text:etm_probe()
The variable etm_driver references
the function __init etm_probe()
If the reference is valid then annotate the
variable with __init* or __refdata (see linux/init.h) or name the variable:
*_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console,

Signed-off-by: Ming Lei <tom.leiming@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

diff --git a/arch/arm/kernel/etm.c b/arch/arm/kernel/etm.c
index 052b509..1bec8b5 100644
--- a/arch/arm/kernel/etm.c
+++ b/arch/arm/kernel/etm.c
@@ -338,7 +338,7 @@ static struct miscdevice etb_miscdev = {
 	.fops = &etb_fops,
 };
 
-static int __init etb_probe(struct amba_device *dev, const struct amba_id *id)
+static int __devinit etb_probe(struct amba_device *dev, const struct amba_id *id)
 {
 	struct tracectx *t = &tracer;
 	int ret = 0;
@@ -530,7 +530,7 @@ static ssize_t trace_mode_store(struct kobject *kobj,
 static struct kobj_attribute trace_mode_attr =
 	__ATTR(trace_mode, 0644, trace_mode_show, trace_mode_store);
 
-static int __init etm_probe(struct amba_device *dev, const struct amba_id *id)
+static int __devinit etm_probe(struct amba_device *dev, const struct amba_id *id)
 {
 	struct tracectx *t = &tracer;
 	int ret = 0;
-- 
cgit v0.10.2


From dfad549d98b60160547d1b8299051b9456c8da85 Mon Sep 17 00:00:00 2001
From: Stephen Boyd <sboyd@codeaurora.org>
Date: Wed, 23 Mar 2011 22:46:15 +0100
Subject: ARM: 6826/1: Merge v6 and v7 DEBUG_LL DCC support

The inline assembly differences for v6 vs. v7 are purely
optimizations. On a v7 processor, an mrc with the pc sets the
condition codes to the 28-31 bits of the register being read. It
just so happens that the TX/RX full bits the DCC support code is
testing for are high enough in the register to be put into the
condition codes. On a v6 processor, this "feature" isn't
implemented and thus we have to do the usual read, mask, test
operations to check for TX/RX full. Thus, we can drop the v7
implementation and just use the v6 implementation for both.

Cc: Tony Lindgren <tony@atomide.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S
index 84ac4d6..adf583c 100644
--- a/arch/arm/boot/compressed/head.S
+++ b/arch/arm/boot/compressed/head.S
@@ -21,20 +21,12 @@
 
 #if defined(CONFIG_DEBUG_ICEDCC)
 
-#if defined(CONFIG_CPU_V6) || defined(CONFIG_CPU_V6K)
+#if defined(CONFIG_CPU_V6) || defined(CONFIG_CPU_V6K) || defined(CONFIG_CPU_V7)
 		.macro	loadsp, rb, tmp
 		.endm
 		.macro	writeb, ch, rb
 		mcr	p14, 0, \ch, c0, c5, 0
 		.endm
-#elif defined(CONFIG_CPU_V7)
-		.macro	loadsp, rb, tmp
-		.endm
-		.macro	writeb, ch, rb
-wait:		mrc	p14, 0, pc, c0, c1, 0
-		bcs	wait
-		mcr	p14, 0, \ch, c0, c5, 0
-		.endm
 #elif defined(CONFIG_CPU_XSCALE)
 		.macro	loadsp, rb, tmp
 		.endm
diff --git a/arch/arm/boot/compressed/misc.c b/arch/arm/boot/compressed/misc.c
index 4657e87..2df3826 100644
--- a/arch/arm/boot/compressed/misc.c
+++ b/arch/arm/boot/compressed/misc.c
@@ -36,7 +36,7 @@ extern void error(char *x);
 
 #ifdef CONFIG_DEBUG_ICEDCC
 
-#if defined(CONFIG_CPU_V6) || defined(CONFIG_CPU_V6K)
+#if defined(CONFIG_CPU_V6) || defined(CONFIG_CPU_V6K) || defined(CONFIG_CPU_V7)
 
 static void icedcc_putc(int ch)
 {
@@ -52,16 +52,6 @@ static void icedcc_putc(int ch)
 	asm("mcr p14, 0, %0, c0, c5, 0" : : "r" (ch));
 }
 
-#elif defined(CONFIG_CPU_V7)
-
-static void icedcc_putc(int ch)
-{
-	asm(
-	"wait:	mrc	p14, 0, pc, c0, c1, 0			\n\
-		bcs	wait					\n\
-		mcr     p14, 0, %0, c0, c5, 0			"
-	: : "r" (ch));
-}
 
 #elif defined(CONFIG_CPU_XSCALE)
 
diff --git a/arch/arm/kernel/debug.S b/arch/arm/kernel/debug.S
index d2d983b..bcd66e0 100644
--- a/arch/arm/kernel/debug.S
+++ b/arch/arm/kernel/debug.S
@@ -25,7 +25,7 @@
 		.macro	addruart, rp, rv
 		.endm
 
-#if defined(CONFIG_CPU_V6) || defined(CONFIG_CPU_V6K)
+#if defined(CONFIG_CPU_V6) || defined(CONFIG_CPU_V6K) || defined(CONFIG_CPU_V7)
 
 		.macro	senduart, rd, rx
 		mcr	p14, 0, \rd, c0, c5, 0
@@ -49,23 +49,6 @@
 1002:
 		.endm
 
-#elif defined(CONFIG_CPU_V7)
-
-		.macro	senduart, rd, rx
-		mcr	p14, 0, \rd, c0, c5, 0
-		.endm
-
-		.macro	busyuart, rd, rx
-busy:		mrc	p14, 0, pc, c0, c1, 0
-		bcs	busy
-		.endm
-
-		.macro	waituart, rd, rx
-wait:		mrc	p14, 0, pc, c0, c1, 0
-		bcs	wait
-
-		.endm
-
 #elif defined(CONFIG_CPU_XSCALE)
 
 		.macro	senduart, rd, rx
-- 
cgit v0.10.2


From 4dc217df68a17a57f8464c74c1b4785e40bddf77 Mon Sep 17 00:00:00 2001
From: Felix Fietkau <nbd@openwrt.org>
Date: Fri, 25 Mar 2011 15:30:38 +0100
Subject: mac80211: fix a crash in minstrel_ht in HT mode with no supported MCS
 rates

When a client connects in HT mode but does not provide any valid MCS
rates, the function that finds the next sample rate gets stuck in an
infinite loop.
Fix this by falling back to legacy rates if no usable MCS rates are found.

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Cc: stable@kernel.org
Signed-off-by: John W. Linville <linville@tuxdriver.com>

diff --git a/net/mac80211/rc80211_minstrel_ht.c b/net/mac80211/rc80211_minstrel_ht.c
index 8212a8b..dbdebeda 100644
--- a/net/mac80211/rc80211_minstrel_ht.c
+++ b/net/mac80211/rc80211_minstrel_ht.c
@@ -659,18 +659,14 @@ minstrel_ht_update_caps(void *priv, struct ieee80211_supported_band *sband,
 	struct ieee80211_mcs_info *mcs = &sta->ht_cap.mcs;
 	struct ieee80211_local *local = hw_to_local(mp->hw);
 	u16 sta_cap = sta->ht_cap.cap;
+	int n_supported = 0;
 	int ack_dur;
 	int stbc;
 	int i;
 
 	/* fall back to the old minstrel for legacy stations */
-	if (!sta->ht_cap.ht_supported) {
-		msp->is_ht = false;
-		memset(&msp->legacy, 0, sizeof(msp->legacy));
-		msp->legacy.r = msp->ratelist;
-		msp->legacy.sample_table = msp->sample_table;
-		return mac80211_minstrel.rate_init(priv, sband, sta, &msp->legacy);
-	}
+	if (!sta->ht_cap.ht_supported)
+		goto use_legacy;
 
 	BUILD_BUG_ON(ARRAY_SIZE(minstrel_mcs_groups) !=
 		MINSTREL_MAX_STREAMS * MINSTREL_STREAM_GROUPS);
@@ -725,7 +721,22 @@ minstrel_ht_update_caps(void *priv, struct ieee80211_supported_band *sband,
 
 		mi->groups[i].supported =
 			mcs->rx_mask[minstrel_mcs_groups[i].streams - 1];
+
+		if (mi->groups[i].supported)
+			n_supported++;
 	}
+
+	if (!n_supported)
+		goto use_legacy;
+
+	return;
+
+use_legacy:
+	msp->is_ht = false;
+	memset(&msp->legacy, 0, sizeof(msp->legacy));
+	msp->legacy.r = msp->ratelist;
+	msp->legacy.sample_table = msp->sample_table;
+	return mac80211_minstrel.rate_init(priv, sband, sta, &msp->legacy);
 }
 
 static void
-- 
cgit v0.10.2


From f62d816fc4324afbb7cf90110c70b6a14139b225 Mon Sep 17 00:00:00 2001
From: Felix Fietkau <nbd@openwrt.org>
Date: Fri, 25 Mar 2011 17:43:41 +0100
Subject: ath9k: fix a chip wakeup related crash in ath9k_start

When the chip is still asleep when ath9k_start is called,
ath9k_hw_configpcipowersave can trigger a data bus error.

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Cc: stable@kernel.org
Signed-off-by: John W. Linville <linville@tuxdriver.com>

diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c
index 5248257..dddb85d 100644
--- a/drivers/net/wireless/ath/ath9k/main.c
+++ b/drivers/net/wireless/ath/ath9k/main.c
@@ -1048,6 +1048,8 @@ static int ath9k_start(struct ieee80211_hw *hw)
 		"Starting driver with initial channel: %d MHz\n",
 		curchan->center_freq);
 
+	ath9k_ps_wakeup(sc);
+
 	mutex_lock(&sc->mutex);
 
 	/* setup initial channel */
@@ -1143,6 +1145,8 @@ static int ath9k_start(struct ieee80211_hw *hw)
 mutex_unlock:
 	mutex_unlock(&sc->mutex);
 
+	ath9k_ps_restore(sc);
+
 	return r;
 }
 
-- 
cgit v0.10.2


From 1f951a7f8ba05192291f781ef99a892697e47d62 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Petr=20=C5=A0tetiar?= <ynezz@true.cz>
Date: Sun, 27 Mar 2011 13:31:26 +0200
Subject: mac80211: fix NULL pointer dereference in ieee80211_key_alloc()
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

The ieee80211_key struct can be kfree()d several times in the function, for
example if some of the key setup functions fails beforehand, but there's no
check if the struct is still valid before we call memcpy() and INIT_LIST_HEAD()
on it.  In some cases (like it was in my case), if there's missing aes-generic
module it could lead to the following kernel OOPS:

	Unable to handle kernel NULL pointer dereference at virtual address 0000018c
	....
	PC is at memcpy+0x80/0x29c
	...
	Backtrace:
	[<bf11c5e4>] (ieee80211_key_alloc+0x0/0x234 [mac80211]) from [<bf1148b4>] (ieee80211_add_key+0x70/0x12c [mac80211])
	[<bf114844>] (ieee80211_add_key+0x0/0x12c [mac80211]) from [<bf070cc0>] (__cfg80211_set_encryption+0x2a8/0x464 [cfg80211])

Signed-off-by: Petr Štetiar <ynezz@true.cz>
Reviewed-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

diff --git a/net/mac80211/key.c b/net/mac80211/key.c
index 8c02469..09cf1f2 100644
--- a/net/mac80211/key.c
+++ b/net/mac80211/key.c
@@ -342,7 +342,7 @@ struct ieee80211_key *ieee80211_key_alloc(u32 cipher, int idx, size_t key_len,
 		if (IS_ERR(key->u.ccmp.tfm)) {
 			err = PTR_ERR(key->u.ccmp.tfm);
 			kfree(key);
-			key = ERR_PTR(err);
+			return ERR_PTR(err);
 		}
 		break;
 	case WLAN_CIPHER_SUITE_AES_CMAC:
@@ -360,7 +360,7 @@ struct ieee80211_key *ieee80211_key_alloc(u32 cipher, int idx, size_t key_len,
 		if (IS_ERR(key->u.aes_cmac.tfm)) {
 			err = PTR_ERR(key->u.aes_cmac.tfm);
 			kfree(key);
-			key = ERR_PTR(err);
+			return ERR_PTR(err);
 		}
 		break;
 	}
-- 
cgit v0.10.2


From 67aa030c0dff6095128bcb4e8043b48360f32331 Mon Sep 17 00:00:00 2001
From: Mariusz Kozlowski <mk@lab.zgora.pl>
Date: Sat, 26 Mar 2011 18:58:51 +0100
Subject: mac80211: fix possible NULL pointer dereference

This patch moves 'key' dereference after BUG_ON(!key) so that when key is NULL
we will see proper trace instead of oops.

Signed-off-by: Mariusz Kozlowski <mk@lab.zgora.pl>
Acked-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

diff --git a/net/mac80211/key.c b/net/mac80211/key.c
index 09cf1f2..af3c564 100644
--- a/net/mac80211/key.c
+++ b/net/mac80211/key.c
@@ -400,11 +400,12 @@ int ieee80211_key_link(struct ieee80211_key *key,
 {
 	struct ieee80211_key *old_key;
 	int idx, ret;
-	bool pairwise = key->conf.flags & IEEE80211_KEY_FLAG_PAIRWISE;
+	bool pairwise;
 
 	BUG_ON(!sdata);
 	BUG_ON(!key);
 
+	pairwise = key->conf.flags & IEEE80211_KEY_FLAG_PAIRWISE;
 	idx = key->conf.keyidx;
 	key->local = sdata->local;
 	key->sdata = sdata;
-- 
cgit v0.10.2


From bef9bacc4ec7ea6a02876164cd6ccaa4759edce4 Mon Sep 17 00:00:00 2001
From: Mariusz Kozlowski <mk@lab.zgora.pl>
Date: Sat, 26 Mar 2011 19:26:55 +0100
Subject: cfg80211:: fix possible NULL pointer dereference

In cfg80211_inform_bss_frame() wiphy is first dereferenced on privsz
initialisation and then it is checked for NULL. This patch fixes that.

Signed-off-by: Mariusz Kozlowski <mk@lab.zgora.pl>
Acked-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

diff --git a/net/wireless/scan.c b/net/wireless/scan.c
index ea427f4..300c11d 100644
--- a/net/wireless/scan.c
+++ b/net/wireless/scan.c
@@ -585,16 +585,23 @@ cfg80211_inform_bss_frame(struct wiphy *wiphy,
 	struct cfg80211_internal_bss *res;
 	size_t ielen = len - offsetof(struct ieee80211_mgmt,
 				      u.probe_resp.variable);
-	size_t privsz = wiphy->bss_priv_size;
+	size_t privsz;
+
+	if (WARN_ON(!mgmt))
+		return NULL;
+
+	if (WARN_ON(!wiphy))
+		return NULL;
 
 	if (WARN_ON(wiphy->signal_type == CFG80211_SIGNAL_TYPE_UNSPEC &&
 	            (signal < 0 || signal > 100)))
 		return NULL;
 
-	if (WARN_ON(!mgmt || !wiphy ||
-		    len < offsetof(struct ieee80211_mgmt, u.probe_resp.variable)))
+	if (WARN_ON(len < offsetof(struct ieee80211_mgmt, u.probe_resp.variable)))
 		return NULL;
 
+	privsz = wiphy->bss_priv_size;
+
 	res = kzalloc(sizeof(*res) + privsz + ielen, gfp);
 	if (!res)
 		return NULL;
-- 
cgit v0.10.2


From 2b78ac9bfc7483ba4bda9ad3d10dd4afcf88337c Mon Sep 17 00:00:00 2001
From: Juuso Oikarinen <juuso.oikarinen@nokia.com>
Date: Mon, 28 Mar 2011 14:32:32 +0300
Subject: cfg80211: fix BSS double-unlinking (continued)

This patch adds to the fix "fix BSS double-unlinking"
(commit 3207390a8b58bfc1335750f91cf6783c48ca19ca) by Johannes Berg.

It turns out, that the double-unlinking scenario can also occur if expired
BSS elements are removed whilst an interface is performing association.

To work around that, replace list_del with list_del_init also in the
"cfg80211_bss_expire" function, so that the check for whether the BSS still is
in the list works correctly in cfg80211_unlink_bss.

Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com>
Reviewed-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

diff --git a/net/wireless/scan.c b/net/wireless/scan.c
index 300c11d..fbf6f33 100644
--- a/net/wireless/scan.c
+++ b/net/wireless/scan.c
@@ -124,6 +124,15 @@ void cfg80211_bss_age(struct cfg80211_registered_device *dev,
 }
 
 /* must hold dev->bss_lock! */
+static void __cfg80211_unlink_bss(struct cfg80211_registered_device *dev,
+				  struct cfg80211_internal_bss *bss)
+{
+	list_del_init(&bss->list);
+	rb_erase(&bss->rbn, &dev->bss_tree);
+	kref_put(&bss->ref, bss_release);
+}
+
+/* must hold dev->bss_lock! */
 void cfg80211_bss_expire(struct cfg80211_registered_device *dev)
 {
 	struct cfg80211_internal_bss *bss, *tmp;
@@ -134,9 +143,7 @@ void cfg80211_bss_expire(struct cfg80211_registered_device *dev)
 			continue;
 		if (!time_after(jiffies, bss->ts + IEEE80211_SCAN_RESULT_EXPIRE))
 			continue;
-		list_del(&bss->list);
-		rb_erase(&bss->rbn, &dev->bss_tree);
-		kref_put(&bss->ref, bss_release);
+		__cfg80211_unlink_bss(dev, bss);
 		expired = true;
 	}
 
@@ -669,11 +676,8 @@ void cfg80211_unlink_bss(struct wiphy *wiphy, struct cfg80211_bss *pub)
 
 	spin_lock_bh(&dev->bss_lock);
 	if (!list_empty(&bss->list)) {
-		list_del_init(&bss->list);
+		__cfg80211_unlink_bss(dev, bss);
 		dev->bss_generation++;
-		rb_erase(&bss->rbn, &dev->bss_tree);
-
-		kref_put(&bss->ref, bss_release);
 	}
 	spin_unlock_bh(&dev->bss_lock);
 }
-- 
cgit v0.10.2


From 499fe9a419d43410be576bcc825658997b6ce822 Mon Sep 17 00:00:00 2001
From: Daniel Halperin <dhalperi@cs.washington.edu>
Date: Thu, 24 Mar 2011 16:01:48 -0700
Subject: mac80211: fix aggregation frame release during timeout

Suppose the aggregation reorder buffer looks like this:

x-T-R1-y-R2,

where x and y are frames that have not been received, T is a received
frame that has timed out, and R1,R2 are received frames that have not
yet timed out. The proper behavior in this scenario is to move the
window past x (skipping it), release T and R1, and leave the window at y
until y is received or R2 times out.

As written, this code will instead leave the window at R1, because it
has not yet timed out. Fix this by exiting the reorder loop only when
the frame that has not timed out AND there are skipped frames earlier in
the current valid window.

Signed-off-by: Daniel Halperin <dhalperi@cs.washington.edu>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

diff --git a/net/mac80211/rx.c b/net/mac80211/rx.c
index 5c1930ba..aa5cc37 100644
--- a/net/mac80211/rx.c
+++ b/net/mac80211/rx.c
@@ -612,7 +612,8 @@ static void ieee80211_sta_reorder_release(struct ieee80211_hw *hw,
 				skipped++;
 				continue;
 			}
-			if (!time_after(jiffies, tid_agg_rx->reorder_time[j] +
+			if (skipped &&
+			    !time_after(jiffies, tid_agg_rx->reorder_time[j] +
 					HT_RX_REORDER_BUF_TIMEOUT))
 				goto set_release_timer;
 
-- 
cgit v0.10.2


From f3cf5c4fedbe13880cd80a9fa1aebae79ebef20e Mon Sep 17 00:00:00 2001
From: Seth Forshee <seth.forshee@canonical.com>
Date: Sat, 26 Mar 2011 22:53:34 -0700
Subject: Input: sparse-keymap - report scancodes with key events

Scancodes are useful debugging aids when incorrect keycodes
are being sent, as is common with laptop hotkeys.

Signed-off-by: Seth Forshee <seth.forshee@canonical.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

diff --git a/drivers/input/sparse-keymap.c b/drivers/input/sparse-keymap.c
index 337bf51..74bca5d 100644
--- a/drivers/input/sparse-keymap.c
+++ b/drivers/input/sparse-keymap.c
@@ -208,6 +208,11 @@ int sparse_keymap_setup(struct input_dev *dev,
 		}
 	}
 
+	if (test_bit(EV_KEY, dev->evbit)) {
+		__set_bit(EV_MSC, dev->evbit);
+		__set_bit(MSC_SCAN, dev->mscbit);
+	}
+
 	dev->keycode = map;
 	dev->keycodemax = map_size;
 	dev->getkeycode = sparse_keymap_getkeycode;
@@ -268,6 +273,7 @@ void sparse_keymap_report_entry(struct input_dev *dev, const struct key_entry *k
 {
 	switch (ke->type) {
 	case KE_KEY:
+		input_event(dev, EV_MSC, MSC_SCAN, ke->code);
 		input_report_key(dev, ke->keycode, value);
 		input_sync(dev);
 		if (value && autorelease) {
-- 
cgit v0.10.2


From 170531bae648c0ef8d56b44dc5bd8d67717b0db9 Mon Sep 17 00:00:00 2001
From: Seth Forshee <seth.forshee@canonical.com>
Date: Sat, 26 Mar 2011 22:53:34 -0700
Subject: Input: sparse-keymap - report KEY_UNKNOWN for unknown scan codes

This allows for debugging non-functional keys easily from
userspace.

Signed-off-by: Seth Forshee <seth.forshee@canonical.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

diff --git a/drivers/input/sparse-keymap.c b/drivers/input/sparse-keymap.c
index 74bca5d..fdb6a39 100644
--- a/drivers/input/sparse-keymap.c
+++ b/drivers/input/sparse-keymap.c
@@ -209,6 +209,7 @@ int sparse_keymap_setup(struct input_dev *dev,
 	}
 
 	if (test_bit(EV_KEY, dev->evbit)) {
+		__set_bit(KEY_UNKNOWN, dev->keybit);
 		__set_bit(EV_MSC, dev->evbit);
 		__set_bit(MSC_SCAN, dev->mscbit);
 	}
@@ -311,12 +312,19 @@ bool sparse_keymap_report_event(struct input_dev *dev, unsigned int code,
 {
 	const struct key_entry *ke =
 		sparse_keymap_entry_from_scancode(dev, code);
+	struct key_entry unknown_ke;
 
 	if (ke) {
 		sparse_keymap_report_entry(dev, ke, value, autorelease);
 		return true;
 	}
 
+	/* Report an unknown key event as a debugging aid */
+	unknown_ke.type = KE_KEY;
+	unknown_ke.code = code;
+	unknown_ke.keycode = KEY_UNKNOWN;
+	sparse_keymap_report_entry(dev, &unknown_ke, value, true);
+
 	return false;
 }
 EXPORT_SYMBOL(sparse_keymap_report_event);
-- 
cgit v0.10.2


From ca444564a947034557a85357b3911d067cac4b8f Mon Sep 17 00:00:00 2001
From: Jean Delvare <khali@linux-fr.org>
Date: Fri, 25 Mar 2011 15:20:14 +0100
Subject: x86: Stop including <linux/delay.h> in two asm header files

Stop including <linux/delay.h> in x86 header files which don't
need it. This will let the compiler complain when this header is
not included by source files when it should, so that
contributors can fix the problem before building on other
architectures starts to fail.

Credits go to Geert for the idea.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: James E.J. Bottomley <James.Bottomley@suse.de>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
LKML-Reference: <20110325152014.297890ec@endymion.delvare>
[ this also fixes an upstream build bug in drivers/media/rc/ite-cir.c ]
Signed-off-by: Ingo Molnar <mingo@elte.hu>

diff --git a/arch/x86/include/asm/apic.h b/arch/x86/include/asm/apic.h
index a279d98..2b7d573 100644
--- a/arch/x86/include/asm/apic.h
+++ b/arch/x86/include/asm/apic.h
@@ -2,7 +2,6 @@
 #define _ASM_X86_APIC_H
 
 #include <linux/cpumask.h>
-#include <linux/delay.h>
 #include <linux/pm.h>
 
 #include <asm/alternative.h>
diff --git a/arch/x86/include/asm/dma.h b/arch/x86/include/asm/dma.h
index 97b6d81..057099e 100644
--- a/arch/x86/include/asm/dma.h
+++ b/arch/x86/include/asm/dma.h
@@ -10,7 +10,6 @@
 
 #include <linux/spinlock.h>	/* And spinlocks */
 #include <asm/io.h>		/* need byte IO */
-#include <linux/delay.h>
 
 #ifdef HAVE_REALLY_SLOW_DMA_CONTROLLER
 #define dma_outb	outb_p
diff --git a/arch/x86/kernel/apic/hw_nmi.c b/arch/x86/kernel/apic/hw_nmi.c
index c4e557a..5260fe9 100644
--- a/arch/x86/kernel/apic/hw_nmi.c
+++ b/arch/x86/kernel/apic/hw_nmi.c
@@ -16,6 +16,7 @@
 #include <linux/kprobes.h>
 #include <linux/nmi.h>
 #include <linux/module.h>
+#include <linux/delay.h>
 
 #ifdef CONFIG_HARDLOCKUP_DETECTOR
 u64 hw_nmi_get_sample_period(void)
diff --git a/arch/x86/kernel/apic/x2apic_uv_x.c b/arch/x86/kernel/apic/x2apic_uv_x.c
index 3c28928..d2cf39b 100644
--- a/arch/x86/kernel/apic/x2apic_uv_x.c
+++ b/arch/x86/kernel/apic/x2apic_uv_x.c
@@ -23,6 +23,7 @@
 #include <linux/io.h>
 #include <linux/pci.h>
 #include <linux/kdebug.h>
+#include <linux/delay.h>
 
 #include <asm/uv/uv_mmrs.h>
 #include <asm/uv/uv_hub.h>
diff --git a/arch/x86/kernel/irq.c b/arch/x86/kernel/irq.c
index 948a31e..1cb0b9f 100644
--- a/arch/x86/kernel/irq.c
+++ b/arch/x86/kernel/irq.c
@@ -8,6 +8,7 @@
 #include <linux/seq_file.h>
 #include <linux/smp.h>
 #include <linux/ftrace.h>
+#include <linux/delay.h>
 
 #include <asm/apic.h>
 #include <asm/io_apic.h>
diff --git a/arch/x86/kernel/reboot.c b/arch/x86/kernel/reboot.c
index d3ce37e..08c44b0 100644
--- a/arch/x86/kernel/reboot.c
+++ b/arch/x86/kernel/reboot.c
@@ -6,6 +6,7 @@
 #include <linux/dmi.h>
 #include <linux/sched.h>
 #include <linux/tboot.h>
+#include <linux/delay.h>
 #include <acpi/reboot.h>
 #include <asm/io.h>
 #include <asm/apic.h>
diff --git a/arch/x86/platform/uv/tlb_uv.c b/arch/x86/platform/uv/tlb_uv.c
index a7b38d3..7cb6424 100644
--- a/arch/x86/platform/uv/tlb_uv.c
+++ b/arch/x86/platform/uv/tlb_uv.c
@@ -11,6 +11,7 @@
 #include <linux/debugfs.h>
 #include <linux/kernel.h>
 #include <linux/slab.h>
+#include <linux/delay.h>
 
 #include <asm/mmu_context.h>
 #include <asm/uv/uv.h>
diff --git a/drivers/media/rc/ite-cir.c b/drivers/media/rc/ite-cir.c
index ac0e42b..accaf6c 100644
--- a/drivers/media/rc/ite-cir.c
+++ b/drivers/media/rc/ite-cir.c
@@ -41,6 +41,7 @@
 #include <linux/bitops.h>
 #include <media/rc-core.h>
 #include <linux/pci_ids.h>
+#include <linux/delay.h>
 
 #include "ite-cir.h"
 
diff --git a/drivers/scsi/ultrastor.c b/drivers/scsi/ultrastor.c
index 0571ef96..9f4b58b 100644
--- a/drivers/scsi/ultrastor.c
+++ b/drivers/scsi/ultrastor.c
@@ -138,6 +138,7 @@
 #include <linux/spinlock.h>
 #include <linux/stat.h>
 #include <linux/bitops.h>
+#include <linux/delay.h>
 
 #include <asm/io.h>
 #include <asm/system.h>
-- 
cgit v0.10.2


From 4ac5fc6a3e4d90120f292526bcaa5ee182a7411b Mon Sep 17 00:00:00 2001
From: Xiaotian Feng <dfeng@redhat.com>
Date: Tue, 29 Mar 2011 16:34:32 +0800
Subject: x86, microcode: Unregister syscore_ops after microcode unloaded

Currently, microcode doesn't unregister syscore_ops after it's
unloaded. So if we modprobe then rmmod microcode, the stale
microcode syscore_ops info will stay on syscore_ops_list.

Later when we're trying to reboot/halt/shutdown the machine, kernel
will panic on syscore_shutdown().

With the patch applied, I can reboot/halt/shutdown my machine successfully.

Signed-off-by: Xiaotian Feng <dfeng@redhat.com>
Cc: Tigran Aivazian <tigran@aivazian.fsnet.co.uk>
Cc: Rafael J. Wysocki <rjw@sisk.pl>
LKML-Reference: <1301387672-23661-1-git-send-email-dfeng@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

diff --git a/arch/x86/kernel/microcode_core.c b/arch/x86/kernel/microcode_core.c
index 5ed0ab5..f924280 100644
--- a/arch/x86/kernel/microcode_core.c
+++ b/arch/x86/kernel/microcode_core.c
@@ -550,6 +550,7 @@ static void __exit microcode_exit(void)
 	microcode_dev_exit();
 
 	unregister_hotcpu_notifier(&mc_cpu_notifier);
+	unregister_syscore_ops(&mc_syscore_ops);
 
 	get_online_cpus();
 	mutex_lock(&microcode_mutex);
-- 
cgit v0.10.2


From 234af26ff123dfb2aa48772124721b1354c8e0a5 Mon Sep 17 00:00:00 2001
From: Dan Carpenter <error27@gmail.com>
Date: Tue, 29 Mar 2011 06:25:59 +0300
Subject: ceph: unlock on error in ceph_osdc_start_request()

There was a missing unlock on the error path if __map_request() failed.

Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Sage Weil <sage@newdream.net>

diff --git a/net/ceph/osd_client.c b/net/ceph/osd_client.c
index b6776cb..03740e8 100644
--- a/net/ceph/osd_client.c
+++ b/net/ceph/osd_client.c
@@ -1672,7 +1672,7 @@ int ceph_osdc_start_request(struct ceph_osd_client *osdc,
 	if (req->r_sent == 0) {
 		rc = __map_request(osdc, req);
 		if (rc < 0)
-			return rc;
+			goto out_unlock;
 		if (req->r_osd == NULL) {
 			dout("send_request %p no up osds in pg\n", req);
 			ceph_monc_request_next_osdmap(&osdc->client->monc);
@@ -1689,6 +1689,8 @@ int ceph_osdc_start_request(struct ceph_osd_client *osdc,
 			}
 		}
 	}
+
+out_unlock:
 	mutex_unlock(&osdc->request_mutex);
 	up_read(&osdc->map_sem);
 	return rc;
-- 
cgit v0.10.2


From c286c419c784c238cd699be37fec7a9acc30d89f Mon Sep 17 00:00:00 2001
From: Arnaldo Carvalho de Melo <acme@redhat.com>
Date: Mon, 28 Mar 2011 09:50:11 -0300
Subject: perf tools: Fixup exit path when not able to open events

We have to deal with the TUI mode in perf top, so that we don't end up
with a garbled screen when, say, a non root user on a machine with a
paranoid setting (the default) tries to use 'perf top'.

Introduce a ui__warning_paranoid() routine shared by top and record that
tells the user the valid values for /proc/sys/kernel/perf_event_paranoid.

Cc: David Ahern <daahern@cisco.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

diff --git a/tools/perf/builtin-record.c b/tools/perf/builtin-record.c
index 6febcc1..623695e 100644
--- a/tools/perf/builtin-record.c
+++ b/tools/perf/builtin-record.c
@@ -275,11 +275,10 @@ try_again:
 				     !no_inherit) < 0) {
 			int err = errno;
 
-			if (err == EPERM || err == EACCES)
-				die("Permission error - are you root?\n"
-					"\t Consider tweaking"
-					" /proc/sys/kernel/perf_event_paranoid.\n");
-			else if (err ==  ENODEV && cpu_list) {
+			if (err == EPERM || err == EACCES) {
+				ui__warning_paranoid();
+				exit(EXIT_FAILURE);
+			} else if (err ==  ENODEV && cpu_list) {
 				die("No such device - did you specify"
 					" an out-of-range profile CPU?\n");
 			} else if (err == EINVAL && sample_id_all_avail) {
diff --git a/tools/perf/builtin-top.c b/tools/perf/builtin-top.c
index 676b4fb..935fc4f 100644
--- a/tools/perf/builtin-top.c
+++ b/tools/perf/builtin-top.c
@@ -850,10 +850,10 @@ try_again:
 				     top.evlist->threads, group, inherit) < 0) {
 			int err = errno;
 
-			if (err == EPERM || err == EACCES)
-				die("Permission error - are you root?\n"
-					"\t Consider tweaking"
-					" /proc/sys/kernel/perf_event_paranoid.\n");
+			if (err == EPERM || err == EACCES) {
+				ui__warning_paranoid();
+				goto out_err;
+			}
 			/*
 			 * If it's cycles then fall back to hrtimer
 			 * based cpu-clock-tick sw counter, which
@@ -861,25 +861,35 @@ try_again:
 			 */
 			if (attr->type == PERF_TYPE_HARDWARE &&
 			    attr->config == PERF_COUNT_HW_CPU_CYCLES) {
-
 				if (verbose)
-					warning(" ... trying to fall back to cpu-clock-ticks\n");
+					ui__warning("Cycles event not supported,\n"
+						    "trying to fall back to cpu-clock-ticks\n");
 
 				attr->type = PERF_TYPE_SOFTWARE;
 				attr->config = PERF_COUNT_SW_CPU_CLOCK;
 				goto try_again;
 			}
-			printf("\n");
-			error("sys_perf_event_open() syscall returned with %d "
-			      "(%s).  /bin/dmesg may provide additional information.\n",
-			      err, strerror(err));
-			die("No CONFIG_PERF_EVENTS=y kernel support configured?\n");
-			exit(-1);
+
+			ui__warning("The sys_perf_event_open() syscall "
+				    "returned with %d (%s).  /bin/dmesg "
+				    "may provide additional information.\n"
+				    "No CONFIG_PERF_EVENTS=y kernel support "
+				    "configured?\n", err, strerror(err));
+			goto out_err;
 		}
 	}
 
-	if (perf_evlist__mmap(evlist, mmap_pages, false) < 0)
-		die("failed to mmap with %d (%s)\n", errno, strerror(errno));
+	if (perf_evlist__mmap(evlist, mmap_pages, false) < 0) {
+		ui__warning("Failed to mmap with %d (%s)\n",
+			    errno, strerror(errno));
+		goto out_err;
+	}
+
+	return;
+
+out_err:
+	exit_browser(0);
+	exit(0);
 }
 
 static int __cmd_top(void)
diff --git a/tools/perf/util/debug.c b/tools/perf/util/debug.c
index d4536a9..155749d 100644
--- a/tools/perf/util/debug.c
+++ b/tools/perf/util/debug.c
@@ -57,6 +57,16 @@ void ui__warning(const char *format, ...)
 }
 #endif
 
+void ui__warning_paranoid(void)
+{
+	ui__warning("Permission error - are you root?\n"
+		    "Consider tweaking /proc/sys/kernel/perf_event_paranoid:\n"
+		    " -1 - Not paranoid at all\n"
+		    "  0 - Disallow raw tracepoint access for unpriv\n"
+		    "  1 - Disallow cpu events for unpriv\n"
+		    "  2 - Disallow kernel profiling for unpriv\n");
+}
+
 void trace_event(union perf_event *event)
 {
 	unsigned char *raw_event = (void *)event;
diff --git a/tools/perf/util/debug.h b/tools/perf/util/debug.h
index 93516cf4..fd53db4 100644
--- a/tools/perf/util/debug.h
+++ b/tools/perf/util/debug.h
@@ -36,5 +36,6 @@ int ui_helpline__show_help(const char *format, va_list ap);
 #endif
 
 void ui__warning(const char *format, ...) __attribute__((format(printf, 1, 2)));
+void ui__warning_paranoid(void);
 
 #endif	/* __PERF_DEBUG_H */
-- 
cgit v0.10.2


From ca6a42586fae639ff9e5285d9bdc550fcb1b8d41 Mon Sep 17 00:00:00 2001
From: David Ahern <daahern@cisco.com>
Date: Fri, 25 Mar 2011 13:11:11 -0600
Subject: perf tools: Emit clearer message for sys_perf_event_open ENOENT
 return

Resend of patch sent back in January 2011 in light of recent confusion around
unsupported events for a given platform.

Improve sys_perf_event_open ENOENT return handling in top and record, just
like 5a3446b does for stat.

Retry of Arnaldo's patch using ui_warning instead of die which allows the
fallback from hardware cycles to software clock.

Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
LKML-Reference: <1301080271-20945-1-git-send-email-daahern@cisco.com>
Signed-off-by: David Ahern <daahern@cisco.com>
[ committer note: Some adjustments to make it apply to newer codebase ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

diff --git a/tools/perf/builtin-record.c b/tools/perf/builtin-record.c
index 623695e..db6adec 100644
--- a/tools/perf/builtin-record.c
+++ b/tools/perf/builtin-record.c
@@ -301,11 +301,19 @@ try_again:
 					&& attr->config == PERF_COUNT_HW_CPU_CYCLES) {
 
 				if (verbose)
-					warning(" ... trying to fall back to cpu-clock-ticks\n");
+					ui__warning("The cycles event is not supported, "
+						    "trying to fall back to cpu-clock-ticks\n");
 				attr->type = PERF_TYPE_SOFTWARE;
 				attr->config = PERF_COUNT_SW_CPU_CLOCK;
 				goto try_again;
 			}
+
+			if (err == ENOENT) {
+				ui__warning("The %s event is not supported.\n",
+					    event_name(pos));
+				exit(EXIT_FAILURE);
+			}
+
 			printf("\n");
 			error("sys_perf_event_open() syscall returned with %d (%s).  /bin/dmesg may provide additional information.\n",
 			      err, strerror(err));
diff --git a/tools/perf/builtin-top.c b/tools/perf/builtin-top.c
index 935fc4f..fc1273e 100644
--- a/tools/perf/builtin-top.c
+++ b/tools/perf/builtin-top.c
@@ -870,6 +870,12 @@ try_again:
 				goto try_again;
 			}
 
+			if (err == ENOENT) {
+				ui__warning("The %s event is not supported.\n",
+					    event_name(counter));
+				goto out_err;
+			}
+
 			ui__warning("The sys_perf_event_open() syscall "
 				    "returned with %d (%s).  /bin/dmesg "
 				    "may provide additional information.\n"
-- 
cgit v0.10.2


From 4d439517561d009e170e2fe20be1ba25e19abe75 Mon Sep 17 00:00:00 2001
From: "David S. Miller" <davem@davemloft.net>
Date: Tue, 29 Mar 2011 14:18:39 -0300
Subject: perf symbols: Properly align symbol_conf.priv_size

If symbol_conf.priv_size is not a multiple of "sizeof(u64)" we'll bus
error on sparc64 in symbol__new because the "struct symbol *" pointer
is computed by adding symbol_conf.priv_size to the memory allocated.

We cannot isolate the fix to symbol__new and symbol__delete since the
private area is computed by subtracting the priv_size value from a
"struct symbol" pointer, so then the private area can still be
potentially unaligned.

So, simply align the symbol_conf.priv_size value in symbol__init()

Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <20110328.175849.112593455.davem@davemloft.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

diff --git a/tools/perf/util/symbol.c b/tools/perf/util/symbol.c
index 8f73907..f06c10f 100644
--- a/tools/perf/util/symbol.c
+++ b/tools/perf/util/symbol.c
@@ -2406,6 +2406,8 @@ int symbol__init(void)
 	if (symbol_conf.initialized)
 		return 0;
 
+	symbol_conf.priv_size = ALIGN(symbol_conf.priv_size, sizeof(u64));
+
 	elf_version(EV_CURRENT);
 	if (symbol_conf.sort_by_name)
 		symbol_conf.priv_size += (sizeof(struct symbol_name_rb_node) -
-- 
cgit v0.10.2


From fbdb9190482fd83a3eb20cdeb0da454759f479d7 Mon Sep 17 00:00:00 2001
From: Sage Weil <sage@newdream.net>
Date: Tue, 29 Mar 2011 12:11:06 -0700
Subject: libceph: fix null dereference when unregistering linger requests

We should only clear r_osd if we are neither registered as a linger or a
regular request.  We may unregister as a linger while still registered as
a regular request (e.g., in reset_osd).  Incorrectly clearing r_osd there
leads to a null pointer dereference in __send_request.

Also simplify the parallel check in __unregister_request() where we just
removed r_osd_item and know it's empty.

Signed-off-by: Sage Weil <sage@newdream.net>

diff --git a/net/ceph/osd_client.c b/net/ceph/osd_client.c
index 03740e8..3b91d65 100644
--- a/net/ceph/osd_client.c
+++ b/net/ceph/osd_client.c
@@ -837,8 +837,7 @@ static void __unregister_request(struct ceph_osd_client *osdc,
 			dout("moving osd to %p lru\n", req->r_osd);
 			__move_osd_to_lru(osdc, req->r_osd);
 		}
-		if (list_empty(&req->r_osd_item) &&
-		    list_empty(&req->r_linger_item))
+		if (list_empty(&req->r_linger_item))
 			req->r_osd = NULL;
 	}
 
@@ -883,7 +882,8 @@ static void __unregister_linger_request(struct ceph_osd_client *osdc,
 			dout("moving osd to %p lru\n", req->r_osd);
 			__move_osd_to_lru(osdc, req->r_osd);
 		}
-		req->r_osd = NULL;
+		if (list_empty(&req->r_osd_item))
+			req->r_osd = NULL;
 	}
 }
 
-- 
cgit v0.10.2


From 8323c3aa74cd92465350294567142d12ffdcc963 Mon Sep 17 00:00:00 2001
From: Tommi Virtanen <tommi.virtanen@dreamhost.com>
Date: Fri, 25 Mar 2011 16:32:57 -0700
Subject: ceph: Move secret key parsing earlier.

This makes the base64 logic be contained in mount option parsing,
and prepares us for replacing the homebew key management with the
kernel key retention service.

Signed-off-by: Tommi Virtanen <tommi.virtanen@dreamhost.com>
Signed-off-by: Sage Weil <sage@newdream.net>

diff --git a/fs/ceph/super.c b/fs/ceph/super.c
index a9e78b4..f2f77fd 100644
--- a/fs/ceph/super.c
+++ b/fs/ceph/super.c
@@ -353,7 +353,7 @@ static int ceph_show_options(struct seq_file *m, struct vfsmount *mnt)
 
 	if (opt->name)
 		seq_printf(m, ",name=%s", opt->name);
-	if (opt->secret)
+	if (opt->key)
 		seq_puts(m, ",secret=<hidden>");
 
 	if (opt->mount_timeout != CEPH_MOUNT_TIMEOUT_DEFAULT)
diff --git a/include/linux/ceph/auth.h b/include/linux/ceph/auth.h
index 7fff521..aa13392 100644
--- a/include/linux/ceph/auth.h
+++ b/include/linux/ceph/auth.h
@@ -67,12 +67,12 @@ struct ceph_auth_client {
 	bool negotiating;       /* true if negotiating protocol */
 	const char *name;       /* entity name */
 	u64 global_id;          /* our unique id in system */
-	const char *secret;     /* our secret key */
+	const struct ceph_crypto_key *key;     /* our secret key */
 	unsigned want_keys;     /* which services we want */
 };
 
 extern struct ceph_auth_client *ceph_auth_init(const char *name,
-					       const char *secret);
+					       const struct ceph_crypto_key *key);
 extern void ceph_auth_destroy(struct ceph_auth_client *ac);
 
 extern void ceph_auth_reset(struct ceph_auth_client *ac);
diff --git a/include/linux/ceph/libceph.h b/include/linux/ceph/libceph.h
index 0d2e0ff..6365f04 100644
--- a/include/linux/ceph/libceph.h
+++ b/include/linux/ceph/libceph.h
@@ -61,7 +61,7 @@ struct ceph_options {
 					      pointer type of args */
 	int num_mon;
 	char *name;
-	char *secret;
+	struct ceph_crypto_key *key;
 };
 
 /*
diff --git a/net/ceph/auth.c b/net/ceph/auth.c
index 549c1f4..b4bf4ac 100644
--- a/net/ceph/auth.c
+++ b/net/ceph/auth.c
@@ -35,12 +35,12 @@ static int ceph_auth_init_protocol(struct ceph_auth_client *ac, int protocol)
 /*
  * setup, teardown.
  */
-struct ceph_auth_client *ceph_auth_init(const char *name, const char *secret)
+struct ceph_auth_client *ceph_auth_init(const char *name, const struct ceph_crypto_key *key)
 {
 	struct ceph_auth_client *ac;
 	int ret;
 
-	dout("auth_init name '%s' secret '%s'\n", name, secret);
+	dout("auth_init name '%s'\n", name);
 
 	ret = -ENOMEM;
 	ac = kzalloc(sizeof(*ac), GFP_NOFS);
@@ -52,8 +52,8 @@ struct ceph_auth_client *ceph_auth_init(const char *name, const char *secret)
 		ac->name = name;
 	else
 		ac->name = CEPH_AUTH_NAME_DEFAULT;
-	dout("auth_init name %s secret %s\n", ac->name, secret);
-	ac->secret = secret;
+	dout("auth_init name %s\n", ac->name);
+	ac->key = key;
 	return ac;
 
 out:
diff --git a/net/ceph/auth_x.c b/net/ceph/auth_x.c
index 7fd5dfc..1587dc6 100644
--- a/net/ceph/auth_x.c
+++ b/net/ceph/auth_x.c
@@ -662,14 +662,16 @@ int ceph_x_init(struct ceph_auth_client *ac)
 		goto out;
 
 	ret = -EINVAL;
-	if (!ac->secret) {
+	if (!ac->key) {
 		pr_err("no secret set (for auth_x protocol)\n");
 		goto out_nomem;
 	}
 
-	ret = ceph_crypto_key_unarmor(&xi->secret, ac->secret);
-	if (ret)
+	ret = ceph_crypto_key_clone(&xi->secret, ac->key);
+	if (ret < 0) {
+		pr_err("cannot clone key: %d\n", ret);
 		goto out_nomem;
+	}
 
 	xi->starting = true;
 	xi->ticket_handlers = RB_ROOT;
diff --git a/net/ceph/ceph_common.c b/net/ceph/ceph_common.c
index 9bbb356..02e084f 100644
--- a/net/ceph/ceph_common.c
+++ b/net/ceph/ceph_common.c
@@ -20,6 +20,7 @@
 #include <linux/ceph/decode.h>
 #include <linux/ceph/mon_client.h>
 #include <linux/ceph/auth.h>
+#include "crypto.h"
 
 
 
@@ -117,9 +118,29 @@ int ceph_compare_options(struct ceph_options *new_opt,
 	if (ret)
 		return ret;
 
-	ret = strcmp_null(opt1->secret, opt2->secret);
-	if (ret)
-		return ret;
+	if (opt1->key && !opt2->key)
+		return -1;
+	if (!opt1->key && opt2->key)
+		return 1;
+	if (opt1->key && opt2->key) {
+		if (opt1->key->type != opt2->key->type)
+			return -1;
+		if (opt1->key->created.tv_sec != opt2->key->created.tv_sec)
+			return -1;
+		if (opt1->key->created.tv_nsec != opt2->key->created.tv_nsec)
+			return -1;
+		if (opt1->key->len != opt2->key->len)
+			return -1;
+		if (opt1->key->key && !opt2->key->key)
+			return -1;
+		if (!opt1->key->key && opt2->key->key)
+			return 1;
+		if (opt1->key->key && opt2->key->key) {
+			ret = memcmp(opt1->key->key, opt2->key->key, opt1->key->len);
+			if (ret)
+				return ret;
+		}
+	}
 
 	/* any matching mon ip implies a match */
 	for (i = 0; i < opt1->num_mon; i++) {
@@ -203,7 +224,10 @@ void ceph_destroy_options(struct ceph_options *opt)
 {
 	dout("destroy_options %p\n", opt);
 	kfree(opt->name);
-	kfree(opt->secret);
+	if (opt->key) {
+		ceph_crypto_key_destroy(opt->key);
+		kfree(opt->key);
+	}
 	kfree(opt);
 }
 EXPORT_SYMBOL(ceph_destroy_options);
@@ -295,9 +319,14 @@ int ceph_parse_options(struct ceph_options **popt, char *options,
 					      GFP_KERNEL);
 			break;
 		case Opt_secret:
-			opt->secret = kstrndup(argstr[0].from,
-						argstr[0].to-argstr[0].from,
-						GFP_KERNEL);
+		        opt->key = kzalloc(sizeof(*opt->key), GFP_KERNEL);
+			if (!opt->key) {
+				err = -ENOMEM;
+				goto out;
+			}
+			err = ceph_crypto_key_unarmor(opt->key, argstr[0].from);
+			if (err < 0)
+				goto out;
 			break;
 
 			/* misc */
diff --git a/net/ceph/crypto.c b/net/ceph/crypto.c
index 7b505b0..75f0893 100644
--- a/net/ceph/crypto.c
+++ b/net/ceph/crypto.c
@@ -9,6 +9,17 @@
 #include <linux/ceph/decode.h>
 #include "crypto.h"
 
+int ceph_crypto_key_clone(struct ceph_crypto_key *dst,
+			  const struct ceph_crypto_key *src)
+{
+	memcpy(dst, src, sizeof(struct ceph_crypto_key));
+	dst->key = kmalloc(src->len, GFP_NOFS);
+	if (!dst->key)
+		return -ENOMEM;
+	memcpy(dst->key, src->key, src->len);
+	return 0;
+}
+
 int ceph_crypto_key_encode(struct ceph_crypto_key *key, void **p, void *end)
 {
 	if (*p + sizeof(u16) + sizeof(key->created) +
diff --git a/net/ceph/crypto.h b/net/ceph/crypto.h
index f9eccac..6cf6edc 100644
--- a/net/ceph/crypto.h
+++ b/net/ceph/crypto.h
@@ -19,6 +19,8 @@ static inline void ceph_crypto_key_destroy(struct ceph_crypto_key *key)
 	kfree(key->key);
 }
 
+extern int ceph_crypto_key_clone(struct ceph_crypto_key *dst,
+				 const struct ceph_crypto_key *src);
 extern int ceph_crypto_key_encode(struct ceph_crypto_key *key,
 				  void **p, void *end);
 extern int ceph_crypto_key_decode(struct ceph_crypto_key *key,
diff --git a/net/ceph/mon_client.c b/net/ceph/mon_client.c
index 8a07939..cbe31fa 100644
--- a/net/ceph/mon_client.c
+++ b/net/ceph/mon_client.c
@@ -759,7 +759,7 @@ int ceph_monc_init(struct ceph_mon_client *monc, struct ceph_client *cl)
 
 	/* authentication */
 	monc->auth = ceph_auth_init(cl->options->name,
-				    cl->options->secret);
+				    cl->options->key);
 	if (IS_ERR(monc->auth))
 		return PTR_ERR(monc->auth);
 	monc->auth->want_keys =
-- 
cgit v0.10.2


From e2c3d29b4295c3eec18294bc34f0c99a7b9ae413 Mon Sep 17 00:00:00 2001
From: Tommi Virtanen <tommi.virtanen@dreamhost.com>
Date: Fri, 25 Mar 2011 16:40:48 -0700
Subject: libceph: Get secret from the kernel keys api when mounting with
 key=NAME.

Signed-off-by: Tommi Virtanen <tommi.virtanen@dreamhost.com>
Signed-off-by: Sage Weil <sage@newdream.net>

diff --git a/net/ceph/Kconfig b/net/ceph/Kconfig
index ad42404..be683f2 100644
--- a/net/ceph/Kconfig
+++ b/net/ceph/Kconfig
@@ -4,6 +4,7 @@ config CEPH_LIB
 	select LIBCRC32C
 	select CRYPTO_AES
 	select CRYPTO
+	select KEYS
 	default n
 	help
 	  Choose Y or M here to include cephlib, which provides the
diff --git a/net/ceph/ceph_common.c b/net/ceph/ceph_common.c
index 02e084f..c92bc8d 100644
--- a/net/ceph/ceph_common.c
+++ b/net/ceph/ceph_common.c
@@ -5,6 +5,8 @@
 #include <linux/fs.h>
 #include <linux/inet.h>
 #include <linux/in6.h>
+#include <linux/key.h>
+#include <keys/user-type.h>
 #include <linux/module.h>
 #include <linux/mount.h>
 #include <linux/parser.h>
@@ -197,6 +199,7 @@ enum {
 	Opt_fsid,
 	Opt_name,
 	Opt_secret,
+	Opt_key,
 	Opt_ip,
 	Opt_last_string,
 	/* string args above */
@@ -213,6 +216,7 @@ static match_table_t opt_tokens = {
 	{Opt_fsid, "fsid=%s"},
 	{Opt_name, "name=%s"},
 	{Opt_secret, "secret=%s"},
+	{Opt_key, "key=%s"},
 	{Opt_ip, "ip=%s"},
 	/* string args above */
 	{Opt_noshare, "noshare"},
@@ -232,6 +236,50 @@ void ceph_destroy_options(struct ceph_options *opt)
 }
 EXPORT_SYMBOL(ceph_destroy_options);
 
+/* get secret from key store */
+static int get_secret(struct ceph_crypto_key *dst, const char *name) {
+	struct key *ukey;
+	int key_err;
+	int err = 0;
+	struct user_key_payload *payload;
+	void *p;
+
+	ukey = request_key(&key_type_user, name, NULL);
+	if (!ukey || IS_ERR(ukey)) {
+		/* request_key errors don't map nicely to mount(2)
+		   errors; don't even try, but still printk */
+		key_err = PTR_ERR(ukey);
+		switch (key_err) {
+		case -ENOKEY:
+			pr_warning("ceph: Mount failed due to key not found: %s\n", name);
+			break;
+		case -EKEYEXPIRED:
+			pr_warning("ceph: Mount failed due to expired key: %s\n", name);
+			break;
+		case -EKEYREVOKED:
+			pr_warning("ceph: Mount failed due to revoked key: %s\n", name);
+			break;
+		default:
+			pr_warning("ceph: Mount failed due to unknown key error"
+			       " %d: %s\n", key_err, name);
+		}
+		err = -EPERM;
+		goto out;
+	}
+
+	payload = ukey->payload.data;
+	p = payload->data;
+	err = ceph_crypto_key_decode(dst, &p, p + payload->datalen);
+	if (err)
+		goto out_key;
+	/* pass through, err is 0 */
+
+out_key:
+	key_put(ukey);
+out:
+	return err;
+}
+
 int ceph_parse_options(struct ceph_options **popt, char *options,
 		       const char *dev_name, const char *dev_name_end,
 		       int (*parse_extra_token)(char *c, void *private),
@@ -328,6 +376,16 @@ int ceph_parse_options(struct ceph_options **popt, char *options,
 			if (err < 0)
 				goto out;
 			break;
+		case Opt_key:
+		        opt->key = kzalloc(sizeof(*opt->key), GFP_KERNEL);
+			if (!opt->key) {
+				err = -ENOMEM;
+				goto out;
+			}
+			err = get_secret(opt->key, argstr[0].from);
+			if (err < 0)
+				goto out;
+			break;
 
 			/* misc */
 		case Opt_osdtimeout:
-- 
cgit v0.10.2


From 4b2a58abd1e17c0ee53c8dded879e015917cca67 Mon Sep 17 00:00:00 2001
From: Tommi Virtanen <tommi.virtanen@dreamhost.com>
Date: Mon, 28 Mar 2011 14:59:38 -0700
Subject: libceph: Create a new key type "ceph".

This allows us to use existence of the key type as a feature test,
from userspace.

Signed-off-by: Tommi Virtanen <tommi.virtanen@dreamhost.com>
Signed-off-by: Sage Weil <sage@newdream.net>

diff --git a/include/keys/ceph-type.h b/include/keys/ceph-type.h
new file mode 100644
index 0000000..f69c4ac
--- /dev/null
+++ b/include/keys/ceph-type.h
@@ -0,0 +1,8 @@
+#ifndef _KEYS_CEPH_TYPE_H
+#define _KEYS_CEPH_TYPE_H
+
+#include <linux/key.h>
+
+extern struct key_type key_type_ceph;
+
+#endif
diff --git a/net/ceph/ceph_common.c b/net/ceph/ceph_common.c
index c92bc8d..132963a 100644
--- a/net/ceph/ceph_common.c
+++ b/net/ceph/ceph_common.c
@@ -6,7 +6,7 @@
 #include <linux/inet.h>
 #include <linux/in6.h>
 #include <linux/key.h>
-#include <keys/user-type.h>
+#include <keys/ceph-type.h>
 #include <linux/module.h>
 #include <linux/mount.h>
 #include <linux/parser.h>
@@ -241,10 +241,9 @@ static int get_secret(struct ceph_crypto_key *dst, const char *name) {
 	struct key *ukey;
 	int key_err;
 	int err = 0;
-	struct user_key_payload *payload;
-	void *p;
+	struct ceph_crypto_key *ckey;
 
-	ukey = request_key(&key_type_user, name, NULL);
+	ukey = request_key(&key_type_ceph, name, NULL);
 	if (!ukey || IS_ERR(ukey)) {
 		/* request_key errors don't map nicely to mount(2)
 		   errors; don't even try, but still printk */
@@ -267,9 +266,8 @@ static int get_secret(struct ceph_crypto_key *dst, const char *name) {
 		goto out;
 	}
 
-	payload = ukey->payload.data;
-	p = payload->data;
-	err = ceph_crypto_key_decode(dst, &p, p + payload->datalen);
+	ckey = ukey->payload.data;
+	err = ceph_crypto_key_clone(dst, ckey);
 	if (err)
 		goto out_key;
 	/* pass through, err is 0 */
@@ -583,10 +581,14 @@ static int __init init_ceph_lib(void)
 	if (ret < 0)
 		goto out;
 
-	ret = ceph_msgr_init();
+	ret = ceph_crypto_init();
 	if (ret < 0)
 		goto out_debugfs;
 
+	ret = ceph_msgr_init();
+	if (ret < 0)
+		goto out_crypto;
+
 	pr_info("loaded (mon/osd proto %d/%d, osdmap %d/%d %d/%d)\n",
 		CEPH_MONC_PROTOCOL, CEPH_OSDC_PROTOCOL,
 		CEPH_OSDMAP_VERSION, CEPH_OSDMAP_VERSION_EXT,
@@ -594,6 +596,8 @@ static int __init init_ceph_lib(void)
 
 	return 0;
 
+out_crypto:
+	ceph_crypto_shutdown();
 out_debugfs:
 	ceph_debugfs_cleanup();
 out:
@@ -604,6 +608,7 @@ static void __exit exit_ceph_lib(void)
 {
 	dout("exit_ceph_lib\n");
 	ceph_msgr_exit();
+	ceph_crypto_shutdown();
 	ceph_debugfs_cleanup();
 }
 
diff --git a/net/ceph/crypto.c b/net/ceph/crypto.c
index 75f0893..5a8009c 100644
--- a/net/ceph/crypto.c
+++ b/net/ceph/crypto.c
@@ -5,7 +5,9 @@
 #include <linux/scatterlist.h>
 #include <linux/slab.h>
 #include <crypto/hash.h>
+#include <linux/key-type.h>
 
+#include <keys/ceph-type.h>
 #include <linux/ceph/decode.h>
 #include "crypto.h"
 
@@ -421,3 +423,63 @@ int ceph_encrypt2(struct ceph_crypto_key *secret, void *dst, size_t *dst_len,
 		return -EINVAL;
 	}
 }
+
+int ceph_key_instantiate(struct key *key, const void *data, size_t datalen)
+{
+	struct ceph_crypto_key *ckey;
+	int ret;
+	void *p;
+
+	ret = -EINVAL;
+	if (datalen <= 0 || datalen > 32767 || !data)
+		goto err;
+
+	ret = key_payload_reserve(key, datalen);
+	if (ret < 0)
+		goto err;
+
+	ret = -ENOMEM;
+	ckey = kmalloc(sizeof(*ckey), GFP_KERNEL);
+	if (!ckey)
+		goto err;
+
+	/* TODO ceph_crypto_key_decode should really take const input */
+	p = (void*)data;
+	ret = ceph_crypto_key_decode(ckey, &p, (char*)data+datalen);
+	if (ret < 0)
+		goto err_ckey;
+
+	key->payload.data = ckey;
+	return 0;
+
+err_ckey:
+	kfree(ckey);
+err:
+	return ret;
+}
+
+int ceph_key_match(const struct key *key, const void *description)
+{
+	return strcmp(key->description, description) == 0;
+}
+
+void ceph_key_destroy(struct key *key) {
+	struct ceph_crypto_key *ckey = key->payload.data;
+
+	ceph_crypto_key_destroy(ckey);
+}
+
+struct key_type key_type_ceph = {
+	.name		= "ceph",
+	.instantiate	= ceph_key_instantiate,
+	.match		= ceph_key_match,
+	.destroy	= ceph_key_destroy,
+};
+
+int ceph_crypto_init(void) {
+	return register_key_type(&key_type_ceph);
+}
+
+void ceph_crypto_shutdown(void) {
+	unregister_key_type(&key_type_ceph);
+}
diff --git a/net/ceph/crypto.h b/net/ceph/crypto.h
index 6cf6edc..1919d15 100644
--- a/net/ceph/crypto.h
+++ b/net/ceph/crypto.h
@@ -42,6 +42,8 @@ extern int ceph_encrypt2(struct ceph_crypto_key *secret,
 			 void *dst, size_t *dst_len,
 			 const void *src1, size_t src1_len,
 			 const void *src2, size_t src2_len);
+extern int ceph_crypto_init(void);
+extern void ceph_crypto_shutdown(void);
 
 /* armor.c */
 extern int ceph_armor(char *dst, const char *src, const char *end);
-- 
cgit v0.10.2


From 3bda50e3eaf58a4b9c4ce34204e5faa15c8b1b97 Mon Sep 17 00:00:00 2001
From: Stanislaw Gruszka <sgruszka@redhat.com>
Date: Mon, 14 Mar 2011 14:15:06 +0100
Subject: iwl3945: do not deprecate software scan

Software scanning can be used for workaround some performance problems,
so do not deprecate it.

Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Acked-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

diff --git a/drivers/net/wireless/iwlegacy/iwl3945-base.c b/drivers/net/wireless/iwlegacy/iwl3945-base.c
index ab87e1b..b6c5209 100644
--- a/drivers/net/wireless/iwlegacy/iwl3945-base.c
+++ b/drivers/net/wireless/iwlegacy/iwl3945-base.c
@@ -3960,8 +3960,7 @@ static int iwl3945_pci_probe(struct pci_dev *pdev, const struct pci_device_id *e
 	 * "the hard way", rather than using device's scan.
 	 */
 	if (iwl3945_mod_params.disable_hw_scan) {
-		dev_printk(KERN_DEBUG, &(pdev->dev),
-			"sw scan support is deprecated\n");
+		IWL_DEBUG_INFO(priv, "Disabling hw_scan\n");
 		iwl3945_hw_ops.hw_scan = NULL;
 	}
 
@@ -4280,8 +4279,7 @@ MODULE_PARM_DESC(swcrypto,
 		"using software crypto (default 1 [software])");
 module_param_named(disable_hw_scan, iwl3945_mod_params.disable_hw_scan,
 		int, S_IRUGO);
-MODULE_PARM_DESC(disable_hw_scan,
-		"disable hardware scanning (default 0) (deprecated)");
+MODULE_PARM_DESC(disable_hw_scan, "disable hardware scanning (default 0)");
 #ifdef CONFIG_IWLWIFI_LEGACY_DEBUG
 module_param_named(debug, iwlegacy_debug_level, uint, S_IRUGO | S_IWUSR);
 MODULE_PARM_DESC(debug, "debug output mask");
-- 
cgit v0.10.2


From 8d4ca61a10feea9583dc62ec1514722e99bdcd3d Mon Sep 17 00:00:00 2001
From: Xose Vazquez Perez <xose.vazquez@gmail.com>
Date: Sun, 27 Mar 2011 20:33:06 +0200
Subject: wireless: rt2x00: rt2800usb.c add and identify ids

taken from staging/rt2860
0x0411,0x016f de37cd49b5a54facef174cf34496919857436e8f MelCo(Buffalo) WLI-UC-G301N
0x050d,0x825b 12840c63b0679f7fab88ea1cc26b52db8b574ce7 Belkin F5D8055
0x050d,0x935a 705059a670f3af2b37695e82de0ee58e75e656ed Belkin F6D4050 v1
0x050d,0x935b 5d92fe3387d086fc2f10426fbdb6b86d6cce5a47 Belkin F6D4050 v2

identifed from ralink driverss
0x0930,0x0a07 RT35xx TOSHIBA 2010_1215_RT3572_Linux_STA_v2.5.0.0.DPO
0x1d4d,0x0011 3072 Pegatron 2011_0107_RT3070_RT3370_Linux_STA_v2.5.0.1_DPO

Signed-off-by: Xose Vazquez Perez <xose.vazquez@gmail.com>
Acked-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

diff --git a/drivers/net/wireless/rt2x00/rt2800usb.c b/drivers/net/wireless/rt2x00/rt2800usb.c
index 4e36865..37509d0 100644
--- a/drivers/net/wireless/rt2x00/rt2800usb.c
+++ b/drivers/net/wireless/rt2x00/rt2800usb.c
@@ -730,8 +730,12 @@ static struct usb_device_id rt2800usb_device_table[] = {
 	{ USB_DEVICE(0x050d, 0x8053), USB_DEVICE_DATA(&rt2800usb_ops) },
 	{ USB_DEVICE(0x050d, 0x805c), USB_DEVICE_DATA(&rt2800usb_ops) },
 	{ USB_DEVICE(0x050d, 0x815c), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x050d, 0x825b), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x050d, 0x935a), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x050d, 0x935b), USB_DEVICE_DATA(&rt2800usb_ops) },
 	/* Buffalo */
 	{ USB_DEVICE(0x0411, 0x00e8), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x0411, 0x016f), USB_DEVICE_DATA(&rt2800usb_ops) },
 	/* Conceptronic */
 	{ USB_DEVICE(0x14b2, 0x3c06), USB_DEVICE_DATA(&rt2800usb_ops) },
 	{ USB_DEVICE(0x14b2, 0x3c07), USB_DEVICE_DATA(&rt2800usb_ops) },
@@ -818,6 +822,7 @@ static struct usb_device_id rt2800usb_device_table[] = {
 	/* Pegatron */
 	{ USB_DEVICE(0x1d4d, 0x000c), USB_DEVICE_DATA(&rt2800usb_ops) },
 	{ USB_DEVICE(0x1d4d, 0x000e), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x1d4d, 0x0011), USB_DEVICE_DATA(&rt2800usb_ops) },
 	/* Philips */
 	{ USB_DEVICE(0x0471, 0x200f), USB_DEVICE_DATA(&rt2800usb_ops) },
 	/* Planex */
@@ -899,6 +904,8 @@ static struct usb_device_id rt2800usb_device_table[] = {
 	{ USB_DEVICE(0x148f, 0x3572), USB_DEVICE_DATA(&rt2800usb_ops) },
 	/* Sitecom */
 	{ USB_DEVICE(0x0df6, 0x0041), USB_DEVICE_DATA(&rt2800usb_ops) },
+	/* Toshiba */
+	{ USB_DEVICE(0x0930, 0x0a07), USB_DEVICE_DATA(&rt2800usb_ops) },
 	/* Zinwell */
 	{ USB_DEVICE(0x5a57, 0x0284), USB_DEVICE_DATA(&rt2800usb_ops) },
 #endif
@@ -961,7 +968,6 @@ static struct usb_device_id rt2800usb_device_table[] = {
 	{ USB_DEVICE(0x05a6, 0x0101), USB_DEVICE_DATA(&rt2800usb_ops) },
 	{ USB_DEVICE(0x1d4d, 0x0002), USB_DEVICE_DATA(&rt2800usb_ops) },
 	{ USB_DEVICE(0x1d4d, 0x0010), USB_DEVICE_DATA(&rt2800usb_ops) },
-	{ USB_DEVICE(0x1d4d, 0x0011), USB_DEVICE_DATA(&rt2800usb_ops) },
 	/* Planex */
 	{ USB_DEVICE(0x2019, 0x5201), USB_DEVICE_DATA(&rt2800usb_ops) },
 	{ USB_DEVICE(0x2019, 0xab24), USB_DEVICE_DATA(&rt2800usb_ops) },
@@ -975,8 +981,6 @@ static struct usb_device_id rt2800usb_device_table[] = {
 	/* Sweex */
 	{ USB_DEVICE(0x177f, 0x0153), USB_DEVICE_DATA(&rt2800usb_ops) },
 	{ USB_DEVICE(0x177f, 0x0313), USB_DEVICE_DATA(&rt2800usb_ops) },
-	/* Toshiba */
-	{ USB_DEVICE(0x0930, 0x0a07), USB_DEVICE_DATA(&rt2800usb_ops) },
 	/* Zyxel */
 	{ USB_DEVICE(0x0586, 0x341a), USB_DEVICE_DATA(&rt2800usb_ops) },
 #endif
-- 
cgit v0.10.2


From 0263aa45293838b514b8af674a03faf040991a90 Mon Sep 17 00:00:00 2001
From: Stanislaw Gruszka <sgruszka@redhat.com>
Date: Tue, 29 Mar 2011 11:24:21 +0200
Subject: iwl3945: disable hw scan by default

After new NetworkManager 0.8.996 changes, hardware scanning is causing
microcode errors as reported here:
https://bugzilla.redhat.com/show_bug.cgi?id=683571
and sometimes kernel crashes:
https://bugzilla.redhat.com/show_bug.cgi?id=688252

Also with hw scan there are very bad performance on some systems
as reported here:
https://bugzilla.redhat.com/show_bug.cgi?id=671366

Since Intel no longer supports 3945, there is no chance to get proper
firmware fixes, we need workaround problems by disable hardware scanning
by default.

Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

diff --git a/drivers/net/wireless/iwlegacy/iwl3945-base.c b/drivers/net/wireless/iwlegacy/iwl3945-base.c
index b6c5209..28eb3d8 100644
--- a/drivers/net/wireless/iwlegacy/iwl3945-base.c
+++ b/drivers/net/wireless/iwlegacy/iwl3945-base.c
@@ -93,6 +93,7 @@ MODULE_LICENSE("GPL");
 struct iwl_mod_params iwl3945_mod_params = {
 	.sw_crypto = 1,
 	.restart_fw = 1,
+	.disable_hw_scan = 1,
 	/* the rest are 0 by default */
 };
 
@@ -4279,7 +4280,7 @@ MODULE_PARM_DESC(swcrypto,
 		"using software crypto (default 1 [software])");
 module_param_named(disable_hw_scan, iwl3945_mod_params.disable_hw_scan,
 		int, S_IRUGO);
-MODULE_PARM_DESC(disable_hw_scan, "disable hardware scanning (default 0)");
+MODULE_PARM_DESC(disable_hw_scan, "disable hardware scanning (default 1)");
 #ifdef CONFIG_IWLWIFI_LEGACY_DEBUG
 module_param_named(debug, iwlegacy_debug_level, uint, S_IRUGO | S_IWUSR);
 MODULE_PARM_DESC(debug, "debug output mask");
-- 
cgit v0.10.2


From 24047e2c4feb8c126e92cc5bb7a863115c89bd72 Mon Sep 17 00:00:00 2001
From: Christian Lamparter <chunkeey@googlemail.com>
Date: Tue, 29 Mar 2011 13:43:14 +0200
Subject: carl9170: Fix tx aggregation problems with some clients

Some clients seem to rely upon the reception of BlockAckReqs to flush
their rx reorder buffer. In order to fix aggregation for these clients
carl9170 should set IEEE80211_TX_STAT_AMPDU_NO_BACK to generate a
BlockAckReq if the transmission of an AMPDU subframe fails.

This fixes aggregation problems with Intel 5100 Windows STAs (and maybe
others as well).

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

diff --git a/drivers/net/wireless/ath/carl9170/carl9170.h b/drivers/net/wireless/ath/carl9170/carl9170.h
index c6a5fae..9cad061 100644
--- a/drivers/net/wireless/ath/carl9170/carl9170.h
+++ b/drivers/net/wireless/ath/carl9170/carl9170.h
@@ -443,6 +443,7 @@ struct carl9170_ba_stats {
 	u8 ampdu_len;
 	u8 ampdu_ack_len;
 	bool clear;
+	bool req;
 };
 
 struct carl9170_sta_info {
diff --git a/drivers/net/wireless/ath/carl9170/main.c b/drivers/net/wireless/ath/carl9170/main.c
index ede3d7e..89fe60a 100644
--- a/drivers/net/wireless/ath/carl9170/main.c
+++ b/drivers/net/wireless/ath/carl9170/main.c
@@ -1355,6 +1355,7 @@ static int carl9170_op_ampdu_action(struct ieee80211_hw *hw,
 		tid_info = rcu_dereference(sta_info->agg[tid]);
 
 		sta_info->stats[tid].clear = true;
+		sta_info->stats[tid].req = false;
 
 		if (tid_info) {
 			bitmap_zero(tid_info->bitmap, CARL9170_BAW_SIZE);
diff --git a/drivers/net/wireless/ath/carl9170/tx.c b/drivers/net/wireless/ath/carl9170/tx.c
index 0ef70b6..cb70ed7 100644
--- a/drivers/net/wireless/ath/carl9170/tx.c
+++ b/drivers/net/wireless/ath/carl9170/tx.c
@@ -383,6 +383,7 @@ static void carl9170_tx_status_process_ampdu(struct ar9170 *ar,
 
 	if (sta_info->stats[tid].clear) {
 		sta_info->stats[tid].clear = false;
+		sta_info->stats[tid].req = false;
 		sta_info->stats[tid].ampdu_len = 0;
 		sta_info->stats[tid].ampdu_ack_len = 0;
 	}
@@ -391,10 +392,16 @@ static void carl9170_tx_status_process_ampdu(struct ar9170 *ar,
 	if (txinfo->status.rates[0].count == 1)
 		sta_info->stats[tid].ampdu_ack_len++;
 
+	if (!(txinfo->flags & IEEE80211_TX_STAT_ACK))
+		sta_info->stats[tid].req = true;
+
 	if (super->f.mac_control & cpu_to_le16(AR9170_TX_MAC_IMM_BA)) {
 		super->s.rix = sta_info->stats[tid].ampdu_len;
 		super->s.cnt = sta_info->stats[tid].ampdu_ack_len;
 		txinfo->flags |= IEEE80211_TX_STAT_AMPDU;
+		if (sta_info->stats[tid].req)
+			txinfo->flags |= IEEE80211_TX_STAT_AMPDU_NO_BACK;
+
 		sta_info->stats[tid].clear = true;
 	}
 	spin_unlock_bh(&tid_info->lock);
-- 
cgit v0.10.2


From ffd8c746fbef50cf12df239f9d23c2afe1a2c3cb Mon Sep 17 00:00:00 2001
From: Johannes Berg <johannes.berg@intel.com>
Date: Tue, 29 Mar 2011 15:28:11 +0200
Subject: iwlegacy: fix bugs in change_interface

If change_interface gets invoked during a firmware
restart, it may crash; prevent that from happening
by checking if ctx->vif is assigned.

Additionally, in my initial commit I forgot to set
the vif->p2p variable correctly, so fix that too.

Cc: stable@kernel.org [2.6.38+]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

diff --git a/drivers/net/wireless/iwlegacy/iwl-core.c b/drivers/net/wireless/iwlegacy/iwl-core.c
index d418b64..a209a0e 100644
--- a/drivers/net/wireless/iwlegacy/iwl-core.c
+++ b/drivers/net/wireless/iwlegacy/iwl-core.c
@@ -1805,6 +1805,15 @@ iwl_legacy_mac_change_interface(struct ieee80211_hw *hw,
 
 	mutex_lock(&priv->mutex);
 
+	if (!ctx->vif || !iwl_legacy_is_ready_rf(priv)) {
+		/*
+		 * Huh? But wait ... this can maybe happen when
+		 * we're in the middle of a firmware restart!
+		 */
+		err = -EBUSY;
+		goto out;
+	}
+
 	interface_modes = ctx->interface_modes | ctx->exclusive_interface_modes;
 
 	if (!(interface_modes & BIT(newtype))) {
@@ -1832,6 +1841,7 @@ iwl_legacy_mac_change_interface(struct ieee80211_hw *hw,
 	/* success */
 	iwl_legacy_teardown_interface(priv, vif, true);
 	vif->type = newtype;
+	vif->p2p = newp2p;
 	err = iwl_legacy_setup_interface(priv, ctx);
 	WARN_ON(err);
 	/*
-- 
cgit v0.10.2


From 1b7155f7de119870f0d3fad89f125de2ff6c16be Mon Sep 17 00:00:00 2001
From: Robert Richter <robert.richter@amd.com>
Date: Tue, 29 Mar 2011 20:02:57 +0200
Subject: perf tools: Fix NO_NEWT=1 python build error

Fix the following build error:

     GEN python/perf.so
 In file included from util/evsel.h:10,
                  from util/python.c:6:
 util/hist.h:106:18: error: newt.h: No such file or directory
 error: command 'x86_64-pc-linux-gnu-gcc' failed with exit status 1
 make: *** [python/perf.so] Error 1

by passing BASIC_CFLAGS to setup.py. BASIC_CFLAGS variable contains
the -DNO_NEWT_SUPPORT switch which prevents building python c
extension with newt.

Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
LKML-Reference: <20110329180236.GA19366@erda.amd.com>
Signed-off-by: Robert Richter <robert.richter@amd.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

diff --git a/tools/perf/Makefile b/tools/perf/Makefile
index 158c30e..207dee5 100644
--- a/tools/perf/Makefile
+++ b/tools/perf/Makefile
@@ -165,8 +165,12 @@ grep-libs = $(filter -l%,$(1))
 strip-libs = $(filter-out -l%,$(1))
 
 $(OUTPUT)python/perf.so: $(PYRF_OBJS)
-	$(QUIET_GEN)python util/setup.py --quiet  build_ext --build-lib='$(OUTPUT)python' \
-						--build-temp='$(OUTPUT)python/temp'
+	$(QUIET_GEN)( \
+		export CFLAGS="$(BASIC_CFLAGS)"; \
+		python util/setup.py --quiet  build_ext --build-lib='$(OUTPUT)python' \
+			--build-temp='$(OUTPUT)python/temp' \
+	)
+
 #
 # No Perl scripts right now:
 #
diff --git a/tools/perf/util/setup.py b/tools/perf/util/setup.py
index e24ffad..bbc982f 100644
--- a/tools/perf/util/setup.py
+++ b/tools/perf/util/setup.py
@@ -1,13 +1,18 @@
 #!/usr/bin/python2
 
 from distutils.core import setup, Extension
+from os import getenv
+
+cflags = ['-fno-strict-aliasing', '-Wno-write-strings']
+cflags += getenv('CFLAGS', '').split()
 
 perf = Extension('perf',
 		  sources = ['util/python.c', 'util/ctype.c', 'util/evlist.c',
 			     'util/evsel.c', 'util/cpumap.c', 'util/thread_map.c',
 			     'util/util.c', 'util/xyarray.c', 'util/cgroup.c'],
 		  include_dirs = ['util/include'],
-		  extra_compile_args = ['-fno-strict-aliasing', '-Wno-write-strings'])
+		  extra_compile_args = cflags,
+                 )
 
 setup(name='perf',
       version='0.1',
-- 
cgit v0.10.2


From 353c8ed44f8f7414be614685ed29d1e23f5fa76b Mon Sep 17 00:00:00 2001
From: Thomas Gleixner <tglx@linutronix.de>
Date: Tue, 29 Mar 2011 22:18:28 +0200
Subject: genirq: Fix misnamed label in handle_edge_eoi_irq

Reported-by: michael@ellerman.id.au
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: linuxppc-dev@lists.ozlabs.org

diff --git a/kernel/irq/chip.c b/kernel/irq/chip.c
index 616ec1c..1dafc86 100644
--- a/kernel/irq/chip.c
+++ b/kernel/irq/chip.c
@@ -514,7 +514,7 @@ void handle_edge_eoi_irq(unsigned int irq, struct irq_desc *desc)
 	} while ((desc->istate & IRQS_PENDING) &&
 		 !irqd_irq_disabled(&desc->irq_data));
 
-out_unlock:
+out_eoi:
 	chip->irq_eoi(&desc->irq_data);
 	raw_spin_unlock(&desc->lock);
 }
-- 
cgit v0.10.2


From 326b9bdc2a0e4d556a0f444085dca103bcd505de Mon Sep 17 00:00:00 2001
From: Mark Brown <broonie@opensource.wolfsonmicro.com>
Date: Sun, 27 Mar 2011 14:40:01 +0100
Subject: ASoC: Fix CODEC device name for Corgi

Got typoed in the multi-component changes.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@ti.com>
Cc: stable@kernel.org

diff --git a/sound/soc/pxa/corgi.c b/sound/soc/pxa/corgi.c
index 784cff5..9027da4 100644
--- a/sound/soc/pxa/corgi.c
+++ b/sound/soc/pxa/corgi.c
@@ -310,7 +310,7 @@ static struct snd_soc_dai_link corgi_dai = {
 	.cpu_dai_name = "pxa2xx-i2s",
 	.codec_dai_name = "wm8731-hifi",
 	.platform_name = "pxa-pcm-audio",
-	.codec_name = "wm8731-codec-0.001b",
+	.codec_name = "wm8731-codec.0-001b",
 	.init = corgi_wm8731_init,
 	.ops = &corgi_ops,
 };
-- 
cgit v0.10.2


From 86cc8dfc211695193a060a240ac9c9287606e5d8 Mon Sep 17 00:00:00 2001
From: Thomas Gleixner <tglx@linutronix.de>
Date: Wed, 30 Mar 2011 00:09:01 +0200
Subject: x86: apb_timer: Fixup genirq fallout

The lonely user of the internal interface was not in the coccinelle
script.

Reported-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

diff --git a/arch/x86/kernel/apb_timer.c b/arch/x86/kernel/apb_timer.c
index 1293c70..cd1ffed 100644
--- a/arch/x86/kernel/apb_timer.c
+++ b/arch/x86/kernel/apb_timer.c
@@ -316,7 +316,7 @@ static void apbt_setup_irq(struct apbt_dev *adev)
 	irq_modify_status(adev->irq, 0, IRQ_MOVE_PCNTXT);
 	irq_set_affinity(adev->irq, cpumask_of(adev->cpu));
 	/* APB timer irqs are set up as mp_irqs, timer is edge type */
-	__set_irq_handler(adev->irq, handle_edge_irq, 0, "edge");
+	__irq_set_handler(adev->irq, handle_edge_irq, 0, "edge");
 
 	if (system_state == SYSTEM_BOOTING) {
 		if (request_irq(adev->irq, apbt_interrupt_handler,
-- 
cgit v0.10.2


From 286b9bfe8ef6d97213c86bbaf30c250fd1f67568 Mon Sep 17 00:00:00 2001
From: Thomas Gleixner <tglx@linutronix.de>
Date: Wed, 30 Mar 2011 00:15:49 +0200
Subject: sh: Fix irq cleanup fallout

I missed that coccinelle does not fix up header files by default.

Reported-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: <lethal@linux-sh.org>

diff --git a/drivers/sh/intc/internals.h b/drivers/sh/intc/internals.h
index df36a42..5b93485 100644
--- a/drivers/sh/intc/internals.h
+++ b/drivers/sh/intc/internals.h
@@ -86,7 +86,7 @@ enum {	MODE_ENABLE_REG = 0, /* Bit(s) set -> interrupt enabled */
 
 static inline struct intc_desc_int *get_intc_desc(unsigned int irq)
 {
-	struct irq_chip *chip = get_irq_chip(irq);
+	struct irq_chip *chip = irq_get_chip(irq);
 
 	return container_of(chip, struct intc_desc_int, chip);
 }
@@ -103,7 +103,7 @@ static inline void activate_irq(int irq)
 	set_irq_flags(irq, IRQF_VALID);
 #else
 	/* same effect on other architectures */
-	set_irq_noprobe(irq);
+	irq_set_noprobe(irq);
 #endif
 }
 
-- 
cgit v0.10.2


From 380a26be7d5af83f3831c3b6697031dffbb1c8f3 Mon Sep 17 00:00:00 2001
From: Thomas Gleixner <tglx@linutronix.de>
Date: Wed, 30 Mar 2011 00:35:34 +0200
Subject: genirq: Remove now obsolete set_irq_wake()

Missed that one in the big compat remval patch

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

diff --git a/include/linux/interrupt.h b/include/linux/interrupt.h
index 59b72ca..943c9b5 100644
--- a/include/linux/interrupt.h
+++ b/include/linux/interrupt.h
@@ -338,14 +338,6 @@ static inline void enable_irq_lockdep_irqrestore(unsigned int irq, unsigned long
 /* IRQ wakeup (PM) control: */
 extern int irq_set_irq_wake(unsigned int irq, unsigned int on);
 
-#ifndef CONFIG_GENERIC_HARDIRQS_NO_COMPAT
-/* Please do not use: Use the replacement functions instead */
-static inline int set_irq_wake(unsigned int irq, unsigned int on)
-{
-	return irq_set_irq_wake(irq, on);
-}
-#endif
-
 static inline int enable_irq_wake(unsigned int irq)
 {
 	return irq_set_irq_wake(irq, 1);
-- 
cgit v0.10.2


From 28959f268f910b2cd1c25e838b63c342062e28f2 Mon Sep 17 00:00:00 2001
From: Thomas Gleixner <tglx@linutronix.de>
Date: Wed, 30 Mar 2011 00:37:41 +0200
Subject: genirq: Remove obsolete comment

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

diff --git a/include/linux/irq.h b/include/linux/irq.h
index 2a375a7..09a3080 100644
--- a/include/linux/irq.h
+++ b/include/linux/irq.h
@@ -64,13 +64,6 @@ typedef	void (*irq_preflow_handler_t)(struct irq_data *data);
  * IRQ_NO_BALANCING		- Interrupt cannot be balanced (affinity set)
  * IRQ_MOVE_PCNTXT		- Interrupt can be migrated from process context
  * IRQ_NESTED_TRHEAD		- Interrupt nests into another thread
- *
- * Deprecated bits. They are kept updated as long as
- * CONFIG_GENERIC_HARDIRQS_NO_COMPAT is not set. Will go away soon. These bits
- * are internal state of the core code and if you really need to acces
- * them then talk to the genirq maintainer instead of hacking
- * something weird.
- *
  */
 enum {
 	IRQ_TYPE_NONE		= 0x00000000,
-- 
cgit v0.10.2


From 458f7f8f819b63431f1098a086fafce4a503fb77 Mon Sep 17 00:00:00 2001
From: Thomas Gleixner <tglx@linutronix.de>
Date: Wed, 30 Mar 2011 00:39:44 +0200
Subject: sound: Fixup the last user of the old irq functions

I had seen that before, but now that I removed set_irq_wake it broke.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

diff --git a/sound/soc/soc-jack.c b/sound/soc/soc-jack.c
index fcab80b..fc017c0 100644
--- a/sound/soc/soc-jack.c
+++ b/sound/soc/soc-jack.c
@@ -331,7 +331,7 @@ int snd_soc_jack_add_gpios(struct snd_soc_jack *jack, int count,
 			goto err;
 
 		if (gpios[i].wake) {
-			ret = set_irq_wake(gpio_to_irq(gpios[i].gpio), 1);
+			ret = irq_set_irq_wake(gpio_to_irq(gpios[i].gpio), 1);
 			if (ret != 0)
 				printk(KERN_ERR
 				  "Failed to mark GPIO %d as wake source: %d\n",
-- 
cgit v0.10.2


From 84ac7cdbdd0f04df6b96153f7a79127fd6e45467 Mon Sep 17 00:00:00 2001
From: Suresh Siddha <suresh.b.siddha@intel.com>
Date: Tue, 29 Mar 2011 15:38:12 -0700
Subject: x86, mtrr, pat: Fix one cpu getting out of sync during resume

On laptops with core i5/i7, there were reports that after resume
graphics workloads were performing poorly on a specific AP, while
the other cpu's were ok. This was observed on a 32bit kernel
specifically.

Debug showed that the PAT init was not happening on that AP
during resume and hence it contributing to the poor workload
performance on that cpu.

On this system, resume flow looked like this:

1. BP starts the resume sequence and we reinit BP's MTRR's/PAT
   early on using mtrr_bp_restore()

2. Resume sequence brings all AP's online

3. Resume sequence now kicks off the MTRR reinit on all the AP's.

4. For some reason, between point 2 and 3, we moved from BP
   to one of the AP's. My guess is that printk() during resume
   sequence is contributing to this. We don't see similar
   behavior with the 64bit kernel but there is no guarantee that
   at this point the remaining resume sequence (after AP's bringup)
   has to happen on BP.

5. set_mtrr() was assuming that we are still on BP and skipped the
   MTRR/PAT init on that cpu (because of 1 above)

6. But we were on an AP and this led to not reprogramming PAT
   on this cpu leading to bad performance.

Fix this by doing unconditional mtrr_if->set_all() in set_mtrr()
during MTRR/PAT init. This might be unnecessary if we are still
running on BP. But it is of no harm and will guarantee that after
resume, all the cpu's will be in sync with respect to the
MTRR/PAT registers.

Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
LKML-Reference: <1301438292-28370-1-git-send-email-eric@anholt.net>
Signed-off-by: Eric Anholt <eric@anholt.net>
Tested-by: Keith Packard <keithp@keithp.com>
Cc: stable@kernel.org	[v2.6.32+]
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>

diff --git a/arch/x86/kernel/cpu/mtrr/main.c b/arch/x86/kernel/cpu/mtrr/main.c
index 307dfbb..929739a 100644
--- a/arch/x86/kernel/cpu/mtrr/main.c
+++ b/arch/x86/kernel/cpu/mtrr/main.c
@@ -293,14 +293,24 @@ set_mtrr(unsigned int reg, unsigned long base, unsigned long size, mtrr_type typ
 
 	/*
 	 * HACK!
-	 * We use this same function to initialize the mtrrs on boot.
-	 * The state of the boot cpu's mtrrs has been saved, and we want
-	 * to replicate across all the APs.
-	 * If we're doing that @reg is set to something special...
+	 *
+	 * We use this same function to initialize the mtrrs during boot,
+	 * resume, runtime cpu online and on an explicit request to set a
+	 * specific MTRR.
+	 *
+	 * During boot or suspend, the state of the boot cpu's mtrrs has been
+	 * saved, and we want to replicate that across all the cpus that come
+	 * online (either at the end of boot or resume or during a runtime cpu
+	 * online). If we're doing that, @reg is set to something special and on
+	 * this cpu we still do mtrr_if->set_all(). During boot/resume, this
+	 * is unnecessary if at this point we are still on the cpu that started
+	 * the boot/resume sequence. But there is no guarantee that we are still
+	 * on the same cpu. So we do mtrr_if->set_all() on this cpu aswell to be
+	 * sure that we are in sync with everyone else.
 	 */
 	if (reg != ~0U)
 		mtrr_if->set(reg, base, size, type);
-	else if (!mtrr_aps_delayed_init)
+	else
 		mtrr_if->set_all();
 
 	/* Wait for the others */
-- 
cgit v0.10.2


From ff56535d294245b75fd8f79633b935a3b85993c8 Mon Sep 17 00:00:00 2001
From: Stephen Rothwell <sfr@canb.auug.org.au>
Date: Fri, 25 Mar 2011 21:11:29 +0000
Subject: powerpc: Restore some misc devices to our configs
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Uwe Kleine-König reported:

	while working on an defconfig (arm/mx27) I noticed that just updating
	it[1] results in removing CONFIG_EEPROM_AT24=y.  The reason is that
	since commit

		v2.6.36-5965-g5f2365d (misc devices: do not enable by default)

	MISC_DEVICES isn't enabled anymore by default.  So all defconfigs that
	have CONFIG_SOME_SYMBOL=y (or =m) (with SOME_SYMBOL depending on
	MISC_DEVICES) but not CONFIG_MISC_DEVICES=y suffer from the same
	problem.

This restores those misc devices to the powerpc defconfigs.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Uwe Kleine-König <u.kleine-koenig@pengutronix.de
Acked-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
Acked-by: Uwe Kleine-König
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

diff --git a/arch/powerpc/configs/44x/warp_defconfig b/arch/powerpc/configs/44x/warp_defconfig
index 6cf9d66..abf74dc 100644
--- a/arch/powerpc/configs/44x/warp_defconfig
+++ b/arch/powerpc/configs/44x/warp_defconfig
@@ -47,6 +47,7 @@ CONFIG_MTD_NAND_NDFC=y
 CONFIG_MTD_UBI=y
 CONFIG_PROC_DEVICETREE=y
 CONFIG_BLK_DEV_RAM=y
+CONFIG_MISC_DEVICES=y
 CONFIG_EEPROM_AT24=y
 CONFIG_SCSI=y
 CONFIG_BLK_DEV_SD=y
diff --git a/arch/powerpc/configs/52xx/motionpro_defconfig b/arch/powerpc/configs/52xx/motionpro_defconfig
index 6828eda..0c7de96 100644
--- a/arch/powerpc/configs/52xx/motionpro_defconfig
+++ b/arch/powerpc/configs/52xx/motionpro_defconfig
@@ -43,6 +43,7 @@ CONFIG_PROC_DEVICETREE=y
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_SIZE=32768
+CONFIG_MISC_DEVICES=y
 CONFIG_EEPROM_LEGACY=y
 CONFIG_SCSI_TGT=y
 CONFIG_BLK_DEV_SD=y
diff --git a/arch/powerpc/configs/86xx/gef_ppc9a_defconfig b/arch/powerpc/configs/86xx/gef_ppc9a_defconfig
index 4b24412..d41857a 100644
--- a/arch/powerpc/configs/86xx/gef_ppc9a_defconfig
+++ b/arch/powerpc/configs/86xx/gef_ppc9a_defconfig
@@ -85,6 +85,7 @@ CONFIG_BLK_DEV_CRYPTOLOOP=m
 CONFIG_BLK_DEV_NBD=m
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_SIZE=131072
+CONFIG_MISC_DEVICES=y
 CONFIG_DS1682=y
 CONFIG_IDE=y
 CONFIG_BLK_DEV_IDECS=y
diff --git a/arch/powerpc/configs/86xx/gef_sbc310_defconfig b/arch/powerpc/configs/86xx/gef_sbc310_defconfig
index a360ba4..38303ec 100644
--- a/arch/powerpc/configs/86xx/gef_sbc310_defconfig
+++ b/arch/powerpc/configs/86xx/gef_sbc310_defconfig
@@ -85,6 +85,7 @@ CONFIG_BLK_DEV_CRYPTOLOOP=m
 CONFIG_BLK_DEV_NBD=m
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_SIZE=131072
+CONFIG_MISC_DEVICES=y
 CONFIG_DS1682=y
 CONFIG_IDE=y
 CONFIG_BLK_DEV_IDECS=y
diff --git a/arch/powerpc/configs/86xx/gef_sbc610_defconfig b/arch/powerpc/configs/86xx/gef_sbc610_defconfig
index be2829d..9853397 100644
--- a/arch/powerpc/configs/86xx/gef_sbc610_defconfig
+++ b/arch/powerpc/configs/86xx/gef_sbc610_defconfig
@@ -138,6 +138,7 @@ CONFIG_BLK_DEV_CRYPTOLOOP=m
 CONFIG_BLK_DEV_NBD=m
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_SIZE=131072
+CONFIG_MISC_DEVICES=y
 CONFIG_DS1682=y
 CONFIG_BLK_DEV_SD=y
 CONFIG_CHR_DEV_ST=y
diff --git a/arch/powerpc/configs/86xx/mpc8641_hpcn_defconfig b/arch/powerpc/configs/86xx/mpc8641_hpcn_defconfig
index 0c9c7ed..b614508d 100644
--- a/arch/powerpc/configs/86xx/mpc8641_hpcn_defconfig
+++ b/arch/powerpc/configs/86xx/mpc8641_hpcn_defconfig
@@ -63,6 +63,7 @@ CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_NBD=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_SIZE=131072
+CONFIG_MISC_DEVICES=y
 CONFIG_EEPROM_LEGACY=y
 CONFIG_BLK_DEV_SD=y
 CONFIG_CHR_DEV_ST=y
diff --git a/arch/powerpc/configs/e55xx_smp_defconfig b/arch/powerpc/configs/e55xx_smp_defconfig
index 06f9549..9fa1613 100644
--- a/arch/powerpc/configs/e55xx_smp_defconfig
+++ b/arch/powerpc/configs/e55xx_smp_defconfig
@@ -32,6 +32,7 @@ CONFIG_PROC_DEVICETREE=y
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_SIZE=131072
+CONFIG_MISC_DEVICES=y
 CONFIG_EEPROM_LEGACY=y
 CONFIG_INPUT_FF_MEMLESS=m
 # CONFIG_INPUT_MOUSEDEV is not set
diff --git a/arch/powerpc/configs/linkstation_defconfig b/arch/powerpc/configs/linkstation_defconfig
index f39d0cf..8a874b9 100644
--- a/arch/powerpc/configs/linkstation_defconfig
+++ b/arch/powerpc/configs/linkstation_defconfig
@@ -78,6 +78,7 @@ CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=2
 CONFIG_BLK_DEV_RAM_SIZE=8192
+CONFIG_MISC_DEVICES=y
 CONFIG_EEPROM_LEGACY=m
 CONFIG_BLK_DEV_SD=y
 CONFIG_CHR_DEV_SG=y
diff --git a/arch/powerpc/configs/mpc512x_defconfig b/arch/powerpc/configs/mpc512x_defconfig
index 62db8a3..c02bbb2 100644
--- a/arch/powerpc/configs/mpc512x_defconfig
+++ b/arch/powerpc/configs/mpc512x_defconfig
@@ -61,6 +61,7 @@ CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=1
 CONFIG_BLK_DEV_RAM_SIZE=8192
 CONFIG_BLK_DEV_XIP=y
+CONFIG_MISC_DEVICES=y
 CONFIG_EEPROM_AT24=y
 CONFIG_SCSI=y
 # CONFIG_SCSI_PROC_FS is not set
diff --git a/arch/powerpc/configs/mpc5200_defconfig b/arch/powerpc/configs/mpc5200_defconfig
index 7376e27..e63f537 100644
--- a/arch/powerpc/configs/mpc5200_defconfig
+++ b/arch/powerpc/configs/mpc5200_defconfig
@@ -52,6 +52,7 @@ CONFIG_PROC_DEVICETREE=y
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_SIZE=32768
+CONFIG_MISC_DEVICES=y
 CONFIG_EEPROM_AT24=y
 CONFIG_SCSI_TGT=y
 CONFIG_BLK_DEV_SD=y
diff --git a/arch/powerpc/configs/mpc85xx_defconfig b/arch/powerpc/configs/mpc85xx_defconfig
index 99a19d1..c06a86c 100644
--- a/arch/powerpc/configs/mpc85xx_defconfig
+++ b/arch/powerpc/configs/mpc85xx_defconfig
@@ -82,6 +82,7 @@ CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_NBD=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_SIZE=131072
+CONFIG_MISC_DEVICES=y
 CONFIG_EEPROM_LEGACY=y
 CONFIG_BLK_DEV_SD=y
 CONFIG_CHR_DEV_ST=y
diff --git a/arch/powerpc/configs/mpc85xx_smp_defconfig b/arch/powerpc/configs/mpc85xx_smp_defconfig
index c636f23..942ced9 100644
--- a/arch/powerpc/configs/mpc85xx_smp_defconfig
+++ b/arch/powerpc/configs/mpc85xx_smp_defconfig
@@ -84,6 +84,7 @@ CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_NBD=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_SIZE=131072
+CONFIG_MISC_DEVICES=y
 CONFIG_EEPROM_LEGACY=y
 CONFIG_BLK_DEV_SD=y
 CONFIG_CHR_DEV_ST=y
diff --git a/arch/powerpc/configs/mpc86xx_defconfig b/arch/powerpc/configs/mpc86xx_defconfig
index 55b5431..038a308 100644
--- a/arch/powerpc/configs/mpc86xx_defconfig
+++ b/arch/powerpc/configs/mpc86xx_defconfig
@@ -66,6 +66,7 @@ CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_NBD=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_SIZE=131072
+CONFIG_MISC_DEVICES=y
 CONFIG_EEPROM_LEGACY=y
 CONFIG_BLK_DEV_SD=y
 CONFIG_CHR_DEV_ST=y
diff --git a/arch/powerpc/configs/pasemi_defconfig b/arch/powerpc/configs/pasemi_defconfig
index edd2d54..f4deb0b 100644
--- a/arch/powerpc/configs/pasemi_defconfig
+++ b/arch/powerpc/configs/pasemi_defconfig
@@ -59,6 +59,7 @@ CONFIG_PROC_DEVICETREE=y
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_SIZE=16384
+CONFIG_MISC_DEVICES=y
 CONFIG_EEPROM_LEGACY=y
 CONFIG_IDE=y
 CONFIG_BLK_DEV_IDECD=y
diff --git a/arch/powerpc/configs/ppc6xx_defconfig b/arch/powerpc/configs/ppc6xx_defconfig
index 9d64a68..0a10fb0 100644
--- a/arch/powerpc/configs/ppc6xx_defconfig
+++ b/arch/powerpc/configs/ppc6xx_defconfig
@@ -398,6 +398,7 @@ CONFIG_BLK_DEV_RAM_SIZE=16384
 CONFIG_CDROM_PKTCDVD=m
 CONFIG_VIRTIO_BLK=m
 CONFIG_BLK_DEV_HD=y
+CONFIG_MISC_DEVICES=y
 CONFIG_ENCLOSURE_SERVICES=m
 CONFIG_SENSORS_TSL2550=m
 CONFIG_EEPROM_AT24=m
-- 
cgit v0.10.2


From 15d260b36facc1aa769fb39b0efc41f4c8c44729 Mon Sep 17 00:00:00 2001
From: Jim Keniston <jkenisto@us.ibm.com>
Date: Fri, 25 Mar 2011 12:47:58 +0000
Subject: powerpc/nvram: Don't overwrite oops/panic report on normal shutdown

For normal halt, reboot, and poweroff events, refrain from overwriting
the lnx,oops-log partition.  Also, don't save the dmesg buffer on an
emergency-restart event if we've already saved it earlier in panic().

Signed-off-by: Jim Keniston <jkenisto@us.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

diff --git a/arch/powerpc/platforms/pseries/nvram.c b/arch/powerpc/platforms/pseries/nvram.c
index 419707b..00cc3a0 100644
--- a/arch/powerpc/platforms/pseries/nvram.c
+++ b/arch/powerpc/platforms/pseries/nvram.c
@@ -480,8 +480,32 @@ static void oops_to_nvram(struct kmsg_dumper *dumper,
 		const char *new_msgs, unsigned long new_len)
 {
 	static unsigned int oops_count = 0;
+	static bool panicking = false;
 	size_t text_len;
 
+	switch (reason) {
+	case KMSG_DUMP_RESTART:
+	case KMSG_DUMP_HALT:
+	case KMSG_DUMP_POWEROFF:
+		/* These are almost always orderly shutdowns. */
+		return;
+	case KMSG_DUMP_OOPS:
+	case KMSG_DUMP_KEXEC:
+		break;
+	case KMSG_DUMP_PANIC:
+		panicking = true;
+		break;
+	case KMSG_DUMP_EMERG:
+		if (panicking)
+			/* Panic report already captured. */
+			return;
+		break;
+	default:
+		pr_err("%s: ignoring unrecognized KMSG_DUMP_* reason %d\n",
+						__FUNCTION__, (int) reason);
+		return;
+	}
+
 	if (clobbering_unread_rtas_event())
 		return;
 
-- 
cgit v0.10.2


From 6090912c4abcfc6c81b156cf2bb4cda23ae6e847 Mon Sep 17 00:00:00 2001
From: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Date: Thu, 24 Mar 2011 20:50:06 +0000
Subject: powerpc: Implement dma_mmap_coherent()

This is used by Alsa to mmap buffers allocated with dma_alloc_coherent()
into userspace. We need a special variant to handle machines with
non-coherent DMAs as those buffers have "special" virt addresses and
require non-cachable mappings

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

diff --git a/arch/powerpc/include/asm/dma-mapping.h b/arch/powerpc/include/asm/dma-mapping.h
index 6d2416a..dd70fac 100644
--- a/arch/powerpc/include/asm/dma-mapping.h
+++ b/arch/powerpc/include/asm/dma-mapping.h
@@ -42,6 +42,7 @@ extern void __dma_free_coherent(size_t size, void *vaddr);
 extern void __dma_sync(void *vaddr, size_t size, int direction);
 extern void __dma_sync_page(struct page *page, unsigned long offset,
 				 size_t size, int direction);
+extern unsigned long __dma_get_coherent_pfn(unsigned long cpu_addr);
 
 #else /* ! CONFIG_NOT_COHERENT_CACHE */
 /*
@@ -198,6 +199,11 @@ static inline phys_addr_t dma_to_phys(struct device *dev, dma_addr_t daddr)
 #define dma_alloc_noncoherent(d, s, h, f) dma_alloc_coherent(d, s, h, f)
 #define dma_free_noncoherent(d, s, v, h) dma_free_coherent(d, s, v, h)
 
+extern int dma_mmap_coherent(struct device *, struct vm_area_struct *,
+			     void *, dma_addr_t, size_t);
+#define ARCH_HAS_DMA_MMAP_COHERENT
+
+
 static inline void dma_cache_sync(struct device *dev, void *vaddr, size_t size,
 		enum dma_data_direction direction)
 {
diff --git a/arch/powerpc/kernel/dma.c b/arch/powerpc/kernel/dma.c
index cf02cad..d238c08 100644
--- a/arch/powerpc/kernel/dma.c
+++ b/arch/powerpc/kernel/dma.c
@@ -179,3 +179,21 @@ static int __init dma_init(void)
        return 0;
 }
 fs_initcall(dma_init);
+
+int dma_mmap_coherent(struct device *dev, struct vm_area_struct *vma,
+		      void *cpu_addr, dma_addr_t handle, size_t size)
+{
+	unsigned long pfn;
+
+#ifdef CONFIG_NOT_COHERENT_CACHE
+	vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot);
+	pfn = __dma_get_coherent_pfn((unsigned long)cpu_addr);
+#else
+	pfn = page_to_pfn(virt_to_page(cpu_addr));
+#endif
+	return remap_pfn_range(vma, vma->vm_start,
+			       pfn + vma->vm_pgoff,
+			       vma->vm_end - vma->vm_start,
+			       vma->vm_page_prot);
+}
+EXPORT_SYMBOL_GPL(dma_mmap_coherent);
diff --git a/arch/powerpc/mm/dma-noncoherent.c b/arch/powerpc/mm/dma-noncoherent.c
index 757c0be..b42f76c 100644
--- a/arch/powerpc/mm/dma-noncoherent.c
+++ b/arch/powerpc/mm/dma-noncoherent.c
@@ -399,3 +399,23 @@ void __dma_sync_page(struct page *page, unsigned long offset,
 #endif
 }
 EXPORT_SYMBOL(__dma_sync_page);
+
+/*
+ * Return the PFN for a given cpu virtual address returned by
+ * __dma_alloc_coherent. This is used by dma_mmap_coherent()
+ */
+unsigned long __dma_get_coherent_pfn(unsigned long cpu_addr)
+{
+	/* This should always be populated, so we don't test every
+	 * level. If that fails, we'll have a nice crash which
+	 * will be as good as a BUG_ON()
+	 */
+	pgd_t *pgd = pgd_offset_k(cpu_addr);
+	pud_t *pud = pud_offset(pgd, cpu_addr);
+	pmd_t *pmd = pmd_offset(pud, cpu_addr);
+	pte_t *ptep = pte_offset_kernel(pmd, cpu_addr);
+
+	if (pte_none(*ptep) || !pte_present(*ptep))
+		return 0;
+	return pte_pfn(*ptep);
+}
-- 
cgit v0.10.2


From 67eb54944bb9de5f568ea2c28d4f20a5b7d2611d Mon Sep 17 00:00:00 2001
From: Scott Wood <scottwood@freescale.com>
Date: Thu, 24 Mar 2011 11:51:19 +0000
Subject: powerpc: ARCH_PFN_OFFSET should be unsigned long

pfns are unsigned long, but MEMORY_START is phys_addr_t.  This leads
to page_to_pfn() returning phys_addr_t, and thus type mismatches in a few
print statements.

Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

diff --git a/arch/powerpc/include/asm/page.h b/arch/powerpc/include/asm/page.h
index da4b200..2cd664e 100644
--- a/arch/powerpc/include/asm/page.h
+++ b/arch/powerpc/include/asm/page.h
@@ -100,7 +100,7 @@ extern phys_addr_t kernstart_addr;
 #endif
 
 #ifdef CONFIG_FLATMEM
-#define ARCH_PFN_OFFSET		(MEMORY_START >> PAGE_SHIFT)
+#define ARCH_PFN_OFFSET		((unsigned long)(MEMORY_START >> PAGE_SHIFT))
 #define pfn_valid(pfn)		((pfn) >= ARCH_PFN_OFFSET && (pfn) < max_mapnr)
 #endif
 
-- 
cgit v0.10.2


From 05e02d7f88a08b500f0a100733109e4b09ffbeb2 Mon Sep 17 00:00:00 2001
From: Varun Sethi <Varun.Sethi@freescale.com>
Date: Thu, 24 Mar 2011 11:50:26 +0000
Subject: powerpc/booke: Correct the SPRN_MAS5 definition.

339 is the SPR number for MAS5 documented by Power ISA 2.06, and
implemented by e500mc.  It is not yet used anywhere in the kernel,
so nothing should be relying on the wrong number.

Signed-off-by: Varun Sethi <Varun.Sethi@freescale.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

diff --git a/arch/powerpc/include/asm/reg_booke.h b/arch/powerpc/include/asm/reg_booke.h
index 86ad812..3b1a9b7 100644
--- a/arch/powerpc/include/asm/reg_booke.h
+++ b/arch/powerpc/include/asm/reg_booke.h
@@ -110,7 +110,7 @@
 #define SPRN_MAS2	0x272	/* MMU Assist Register 2 */
 #define SPRN_MAS3	0x273	/* MMU Assist Register 3 */
 #define SPRN_MAS4	0x274	/* MMU Assist Register 4 */
-#define SPRN_MAS5	0x275	/* MMU Assist Register 5 */
+#define SPRN_MAS5	0x153	/* MMU Assist Register 5 */
 #define SPRN_MAS6	0x276	/* MMU Assist Register 6 */
 #define SPRN_PID1	0x279	/* Process ID Register 1 */
 #define SPRN_PID2	0x27A	/* Process ID Register 2 */
-- 
cgit v0.10.2


From 834796a8493809ae6667b65c4c044066f41d32c7 Mon Sep 17 00:00:00 2001
From: Stephen Rothwell <sfr@canb.auug.org.au>
Date: Wed, 23 Mar 2011 18:40:47 +0000
Subject: powerpc: Wire up new syscalls

These syscalls have been added recently:
	name_to_handle_at
	open_by_handle_at
	clock_adjtime
	syncfs

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

diff --git a/arch/powerpc/include/asm/systbl.h b/arch/powerpc/include/asm/systbl.h
index aa0f1eb..60f64b1 100644
--- a/arch/powerpc/include/asm/systbl.h
+++ b/arch/powerpc/include/asm/systbl.h
@@ -348,3 +348,7 @@ COMPAT_SYS_SPU(sendmsg)
 COMPAT_SYS_SPU(recvmsg)
 COMPAT_SYS_SPU(recvmmsg)
 SYSCALL_SPU(accept4)
+SYSCALL_SPU(name_to_handle_at)
+COMPAT_SYS_SPU(open_by_handle_at)
+COMPAT_SYS_SPU(clock_adjtime)
+SYSCALL_SPU(syncfs)
diff --git a/arch/powerpc/include/asm/unistd.h b/arch/powerpc/include/asm/unistd.h
index 6151937..3c21564 100644
--- a/arch/powerpc/include/asm/unistd.h
+++ b/arch/powerpc/include/asm/unistd.h
@@ -367,10 +367,14 @@
 #define __NR_recvmsg		342
 #define __NR_recvmmsg		343
 #define __NR_accept4		344
+#define __NR_name_to_handle_at	345
+#define __NR_open_by_handle_at	346
+#define __NR_clock_adjtime	347
+#define __NR_syncfs		348
 
 #ifdef __KERNEL__
 
-#define __NR_syscalls		345
+#define __NR_syscalls		349
 
 #define __NR__exit __NR_exit
 #define NR_syscalls	__NR_syscalls
-- 
cgit v0.10.2


From 4f1fc48a73a49a60b3e03e6d8fb363d1b328bd4e Mon Sep 17 00:00:00 2001
From: Milton Miller <miltonm@bga.com>
Date: Mon, 21 Mar 2011 11:38:02 +0000
Subject: powerpc/xics: Fix numberspace mismatch from irq_desc conversion

commit 79f26c268ebad29bd75d078cfc09d3d82b30ccbd (powerpc:
platforms/pseries irq_data conversion) pushed irq_desc down into many
functions, dererencing the descriptor irq field as late as possible.

But it incorrectly passed a linix virtural irq number to RTAS,
resulting in the interrupt not being disabled and possibly
other bad things, such as another interrupt being disabled and/or
a checkstop.

In addition this missed the point of xics_mask_unknown_vec and
the seperation of xics_mask_real_irq from xics_mask_irq.  When
xics_mask_unknown_vec is called it's because the hardware delivered an
irq source for which we have no linux irq allocated, and thefore we can
not have an irq_desc allocated.

Revert xics_mask_real_irq to its prior version, naming the argument
hwirq to highlight the difference.

Signed-off-by: Milton Miller <miltonm@bga.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

diff --git a/arch/powerpc/platforms/pseries/xics.c b/arch/powerpc/platforms/pseries/xics.c
index 6c1e638..9e7ff87 100644
--- a/arch/powerpc/platforms/pseries/xics.c
+++ b/arch/powerpc/platforms/pseries/xics.c
@@ -250,26 +250,26 @@ static unsigned int xics_startup(struct irq_data *d)
 	return 0;
 }
 
-static void xics_mask_real_irq(struct irq_data *d)
+static void xics_mask_real_irq(unsigned int hwirq)
 {
 	int call_status;
 
-	if (d->irq == XICS_IPI)
+	if (hwirq == XICS_IPI)
 		return;
 
-	call_status = rtas_call(ibm_int_off, 1, 1, NULL, d->irq);
+	call_status = rtas_call(ibm_int_off, 1, 1, NULL, hwirq);
 	if (call_status != 0) {
 		printk(KERN_ERR "%s: ibm_int_off irq=%u returned %d\n",
-			__func__, d->irq, call_status);
+			__func__, hwirq, call_status);
 		return;
 	}
 
 	/* Have to set XIVE to 0xff to be able to remove a slot */
-	call_status = rtas_call(ibm_set_xive, 3, 1, NULL, d->irq,
+	call_status = rtas_call(ibm_set_xive, 3, 1, NULL, hwirq,
 				default_server, 0xff);
 	if (call_status != 0) {
 		printk(KERN_ERR "%s: ibm_set_xive(0xff) irq=%u returned %d\n",
-			__func__, d->irq, call_status);
+			__func__, hwirq, call_status);
 		return;
 	}
 }
@@ -283,13 +283,13 @@ static void xics_mask_irq(struct irq_data *d)
 	irq = (unsigned int)irq_map[d->irq].hwirq;
 	if (irq == XICS_IPI || irq == XICS_IRQ_SPURIOUS)
 		return;
-	xics_mask_real_irq(d);
+	xics_mask_real_irq(irq);
 }
 
 static void xics_mask_unknown_vec(unsigned int vec)
 {
 	printk(KERN_ERR "Interrupt %u (real) is invalid, disabling it.\n", vec);
-	xics_mask_real_irq(irq_get_irq_data(vec));
+	xics_mask_real_irq(vec);
 }
 
 static inline unsigned int xics_xirr_vector(unsigned int xirr)
-- 
cgit v0.10.2


From 943739fd59d3b77e1020ca788bc64439d679693f Mon Sep 17 00:00:00 2001
From: Milton Miller <miltonm@bga.com>
Date: Mon, 21 Mar 2011 08:12:13 +0000
Subject: powerpc/xics: Use hwirq for xics domain irq number

To try to avoid future confusion, rename irq to hwirq when it refers
to a xics domain number instead of a linux irq number.

Signed-off-by: Milton Miller <miltonm@bga.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

diff --git a/arch/powerpc/platforms/pseries/xics.c b/arch/powerpc/platforms/pseries/xics.c
index 9e7ff87..ec8fe22 100644
--- a/arch/powerpc/platforms/pseries/xics.c
+++ b/arch/powerpc/platforms/pseries/xics.c
@@ -204,33 +204,33 @@ static int get_irq_server(unsigned int virq, const struct cpumask *cpumask,
 
 static void xics_unmask_irq(struct irq_data *d)
 {
-	unsigned int irq;
+	unsigned int hwirq;
 	int call_status;
 	int server;
 
 	pr_devel("xics: unmask virq %d\n", d->irq);
 
-	irq = (unsigned int)irq_map[d->irq].hwirq;
-	pr_devel(" -> map to hwirq 0x%x\n", irq);
-	if (irq == XICS_IPI || irq == XICS_IRQ_SPURIOUS)
+	hwirq = (unsigned int)irq_map[d->irq].hwirq;
+	pr_devel(" -> map to hwirq 0x%x\n", hwirq);
+	if (hwirq == XICS_IPI || hwirq == XICS_IRQ_SPURIOUS)
 		return;
 
 	server = get_irq_server(d->irq, d->affinity, 0);
 
-	call_status = rtas_call(ibm_set_xive, 3, 1, NULL, irq, server,
+	call_status = rtas_call(ibm_set_xive, 3, 1, NULL, hwirq, server,
 				DEFAULT_PRIORITY);
 	if (call_status != 0) {
 		printk(KERN_ERR
 			"%s: ibm_set_xive irq %u server %x returned %d\n",
-			__func__, irq, server, call_status);
+			__func__, hwirq, server, call_status);
 		return;
 	}
 
 	/* Now unmask the interrupt (often a no-op) */
-	call_status = rtas_call(ibm_int_on, 1, 1, NULL, irq);
+	call_status = rtas_call(ibm_int_on, 1, 1, NULL, hwirq);
 	if (call_status != 0) {
 		printk(KERN_ERR "%s: ibm_int_on irq=%u returned %d\n",
-			__func__, irq, call_status);
+			__func__, hwirq, call_status);
 		return;
 	}
 }
@@ -276,14 +276,14 @@ static void xics_mask_real_irq(unsigned int hwirq)
 
 static void xics_mask_irq(struct irq_data *d)
 {
-	unsigned int irq;
+	unsigned int hwirq;
 
 	pr_devel("xics: mask virq %d\n", d->irq);
 
-	irq = (unsigned int)irq_map[d->irq].hwirq;
-	if (irq == XICS_IPI || irq == XICS_IRQ_SPURIOUS)
+	hwirq = (unsigned int)irq_map[d->irq].hwirq;
+	if (hwirq == XICS_IPI || hwirq == XICS_IRQ_SPURIOUS)
 		return;
-	xics_mask_real_irq(irq);
+	xics_mask_real_irq(hwirq);
 }
 
 static void xics_mask_unknown_vec(unsigned int vec)
@@ -373,37 +373,37 @@ static unsigned char pop_cppr(void)
 
 static void xics_eoi_direct(struct irq_data *d)
 {
-	unsigned int irq = (unsigned int)irq_map[d->irq].hwirq;
+	unsigned int hwirq = (unsigned int)irq_map[d->irq].hwirq;
 
 	iosync();
-	direct_xirr_info_set((pop_cppr() << 24) | irq);
+	direct_xirr_info_set((pop_cppr() << 24) | hwirq);
 }
 
 static void xics_eoi_lpar(struct irq_data *d)
 {
-	unsigned int irq = (unsigned int)irq_map[d->irq].hwirq;
+	unsigned int hwirq = (unsigned int)irq_map[d->irq].hwirq;
 
 	iosync();
-	lpar_xirr_info_set((pop_cppr() << 24) | irq);
+	lpar_xirr_info_set((pop_cppr() << 24) | hwirq);
 }
 
 static int
 xics_set_affinity(struct irq_data *d, const struct cpumask *cpumask, bool force)
 {
-	unsigned int irq;
+	unsigned int hwirq;
 	int status;
 	int xics_status[2];
 	int irq_server;
 
-	irq = (unsigned int)irq_map[d->irq].hwirq;
-	if (irq == XICS_IPI || irq == XICS_IRQ_SPURIOUS)
+	hwirq = (unsigned int)irq_map[d->irq].hwirq;
+	if (hwirq == XICS_IPI || hwirq == XICS_IRQ_SPURIOUS)
 		return -1;
 
-	status = rtas_call(ibm_get_xive, 1, 3, xics_status, irq);
+	status = rtas_call(ibm_get_xive, 1, 3, xics_status, hwirq);
 
 	if (status) {
 		printk(KERN_ERR "%s: ibm,get-xive irq=%u returns %d\n",
-			__func__, irq, status);
+			__func__, hwirq, status);
 		return -1;
 	}
 
@@ -418,11 +418,11 @@ xics_set_affinity(struct irq_data *d, const struct cpumask *cpumask, bool force)
 	}
 
 	status = rtas_call(ibm_set_xive, 3, 1, NULL,
-				irq, irq_server, xics_status[1]);
+				hwirq, irq_server, xics_status[1]);
 
 	if (status) {
 		printk(KERN_ERR "%s: ibm,set-xive irq=%u returns %d\n",
-			__func__, irq, status);
+			__func__, hwirq, status);
 		return -1;
 	}
 
@@ -874,7 +874,7 @@ void xics_kexec_teardown_cpu(int secondary)
 void xics_migrate_irqs_away(void)
 {
 	int cpu = smp_processor_id(), hw_cpu = hard_smp_processor_id();
-	unsigned int irq, virq;
+	int virq;
 
 	/* If we used to be the default server, move to the new "boot_cpuid" */
 	if (hw_cpu == default_server)
@@ -892,6 +892,7 @@ void xics_migrate_irqs_away(void)
 	for_each_irq(virq) {
 		struct irq_desc *desc;
 		struct irq_chip *chip;
+		unsigned int hwirq;
 		int xics_status[2];
 		int status;
 		unsigned long flags;
@@ -901,9 +902,9 @@ void xics_migrate_irqs_away(void)
 			continue;
 		if (irq_map[virq].host != xics_host)
 			continue;
-		irq = (unsigned int)irq_map[virq].hwirq;
+		hwirq = (unsigned int)irq_map[virq].hwirq;
 		/* We need to get IPIs still. */
-		if (irq == XICS_IPI || irq == XICS_IRQ_SPURIOUS)
+		if (hwirq == XICS_IPI || hwirq == XICS_IRQ_SPURIOUS)
 			continue;
 
 		desc = irq_to_desc(virq);
@@ -918,10 +919,10 @@ void xics_migrate_irqs_away(void)
 
 		raw_spin_lock_irqsave(&desc->lock, flags);
 
-		status = rtas_call(ibm_get_xive, 1, 3, xics_status, irq);
+		status = rtas_call(ibm_get_xive, 1, 3, xics_status, hwirq);
 		if (status) {
 			printk(KERN_ERR "%s: ibm,get-xive irq=%u returns %d\n",
-					__func__, irq, status);
+					__func__, hwirq, status);
 			goto unlock;
 		}
 
-- 
cgit v0.10.2


From 2d86938a4eacb4acf5c4466171ea577d7b8dc4d4 Mon Sep 17 00:00:00 2001
From: Milton Miller <miltonm@bga.com>
Date: Mon, 21 Mar 2011 08:12:13 +0000
Subject: powerpc/pseries/smp: query-cpu-stopped-state support won't change

If a given firmware doesn't have a token to support query-cpu-stopped-state,
its not likely to change during the lifetime of the kernel.

Only print this information once, not once per secondary thread.

While here, make the line wrap grep friendly.

Signed-off-by: Milton Miller <miltonm@bga.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

diff --git a/arch/powerpc/platforms/pseries/smp.c b/arch/powerpc/platforms/pseries/smp.c
index 0317cce..d6479f9 100644
--- a/arch/powerpc/platforms/pseries/smp.c
+++ b/arch/powerpc/platforms/pseries/smp.c
@@ -64,8 +64,8 @@ int smp_query_cpu_stopped(unsigned int pcpu)
 	int qcss_tok = rtas_token("query-cpu-stopped-state");
 
 	if (qcss_tok == RTAS_UNKNOWN_SERVICE) {
-		printk(KERN_INFO "Firmware doesn't support "
-				"query-cpu-stopped-state\n");
+		printk_once(KERN_INFO
+			"Firmware doesn't support query-cpu-stopped-state\n");
 		return QCSS_HARDWARE_ERROR;
 	}
 
-- 
cgit v0.10.2


From ad5d1c888e556bc00c4e86f452cad4a3a87d22c1 Mon Sep 17 00:00:00 2001
From: Anton Blanchard <anton@samba.org>
Date: Sun, 20 Mar 2011 15:28:03 +0000
Subject: powerpc: Fix accounting of softirq time when idle

commit cf9efce0ce31 (powerpc: Account time using timebase rather
than PURR) used in_irq() to detect if the time was spent in
interrupt processing. This only catches hardirq context so if we
are in softirq context and in the idle loop we end up accounting it
as idle time. If we instead use in_interrupt() we catch both softirq
and hardirq time.

The issue was found when running a network intensive workload. top
showed the following:

0.0%us,  1.1%sy,  0.0%ni, 85.7%id,  0.0%wa,  9.9%hi,  3.3%si,  0.0%st

85.7% idle. But this was wildly different to the perf events data.
To confirm the suspicion I ran something to keep the core busy:

# yes > /dev/null &

8.2%us,  0.0%sy,  0.0%ni,  0.0%id,  0.0%wa, 10.3%hi, 81.4%si,  0.0%st

We only got 8.2% of the CPU for the userspace task and softirq has
shot up to 81.4%.

With the patch below top shows the correct stats:

0.0%us,  0.0%sy,  0.0%ni,  5.3%id,  0.0%wa, 13.3%hi, 81.3%si,  0.0%st

Signed-off-by: Anton Blanchard <anton@samba.org>
Cc: stable@kernel.org
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

diff --git a/arch/powerpc/kernel/time.c b/arch/powerpc/kernel/time.c
index 09d31db..aa92696 100644
--- a/arch/powerpc/kernel/time.c
+++ b/arch/powerpc/kernel/time.c
@@ -356,7 +356,7 @@ void account_system_vtime(struct task_struct *tsk)
 	}
 	get_paca()->user_time_scaled += user_scaled;
 
-	if (in_irq() || idle_task(smp_processor_id()) != tsk) {
+	if (in_interrupt() || idle_task(smp_processor_id()) != tsk) {
 		account_system_time(tsk, 0, delta, sys_scaled);
 		if (stolen)
 			account_steal_time(stolen);
-- 
cgit v0.10.2


From 84493804bbbc10291492661440728668b2b06abe Mon Sep 17 00:00:00 2001
From: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Date: Sun, 6 Mar 2011 18:09:07 +0000
Subject: powerpc/mm: Move the STAB0 location to 0x8000 to make room in low
 memory

Recent upstream builds with allmodconfig fail due to lack of space
between 0x3000 and 0x6000. We have a hard block at 0x7000 but we can
spare a page by moving the STAB0 from 0x6000 to 0x8000.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

diff --git a/arch/powerpc/include/asm/mmu-hash64.h b/arch/powerpc/include/asm/mmu-hash64.h
index acac35d..ae7b3ef 100644
--- a/arch/powerpc/include/asm/mmu-hash64.h
+++ b/arch/powerpc/include/asm/mmu-hash64.h
@@ -27,7 +27,7 @@
 #define STE_VSID_SHIFT	12
 
 /* Location of cpu0's segment table */
-#define STAB0_PAGE	0x6
+#define STAB0_PAGE	0x8
 #define STAB0_OFFSET	(STAB0_PAGE << 12)
 #define STAB0_PHYS_ADDR	(STAB0_OFFSET + PHYSICAL_START)
 
diff --git a/arch/powerpc/kernel/exceptions-64s.S b/arch/powerpc/kernel/exceptions-64s.S
index 8a81799..c532cb2 100644
--- a/arch/powerpc/kernel/exceptions-64s.S
+++ b/arch/powerpc/kernel/exceptions-64s.S
@@ -977,20 +977,6 @@ _GLOBAL(do_stab_bolted)
 	rfid
 	b	.	/* prevent speculative execution */
 
-/*
- * Space for CPU0's segment table.
- *
- * On iSeries, the hypervisor must fill in at least one entry before
- * we get control (with relocate on).  The address is given to the hv
- * as a page number (see xLparMap below), so this must be at a
- * fixed address (the linker can't compute (u64)&initial_stab >>
- * PAGE_SHIFT).
- */
-	. = STAB0_OFFSET	/* 0x6000 */
-	.globl initial_stab
-initial_stab:
-	.space	4096
-
 #ifdef CONFIG_PPC_PSERIES
 /*
  * Data area reserved for FWNMI option.
@@ -1027,3 +1013,17 @@ xLparMap:
 #ifdef CONFIG_PPC_PSERIES
         . = 0x8000
 #endif /* CONFIG_PPC_PSERIES */
+
+/*
+ * Space for CPU0's segment table.
+ *
+ * On iSeries, the hypervisor must fill in at least one entry before
+ * we get control (with relocate on).  The address is given to the hv
+ * as a page number (see xLparMap above), so this must be at a
+ * fixed address (the linker can't compute (u64)&initial_stab >>
+ * PAGE_SHIFT).
+ */
+	. = STAB0_OFFSET	/* 0x8000 */
+	.globl initial_stab
+initial_stab:
+	.space	4096
-- 
cgit v0.10.2


From 23c621104360b71fd6d713142a24e6583418c3e1 Mon Sep 17 00:00:00 2001
From: Anton Blanchard <anton@au1.ibm.com>
Date: Sat, 5 Mar 2011 02:00:26 +0000
Subject: powerpc/pseries: Enable Chelsio network and iWARP drivers

Ensure the Chelsio T3/T4 network drivers and iWARP drivers are
enabled in the pseries config.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

diff --git a/arch/powerpc/configs/pseries_defconfig b/arch/powerpc/configs/pseries_defconfig
index 9c3f22c..249ddd0 100644
--- a/arch/powerpc/configs/pseries_defconfig
+++ b/arch/powerpc/configs/pseries_defconfig
@@ -189,6 +189,7 @@ CONFIG_TIGON3=y
 CONFIG_BNX2=m
 CONFIG_CHELSIO_T1=m
 CONFIG_CHELSIO_T3=m
+CONFIG_CHELSIO_T4=m
 CONFIG_EHEA=y
 CONFIG_IXGBE=m
 CONFIG_IXGB=m
@@ -255,6 +256,8 @@ CONFIG_INFINIBAND_USER_MAD=m
 CONFIG_INFINIBAND_USER_ACCESS=m
 CONFIG_INFINIBAND_MTHCA=m
 CONFIG_INFINIBAND_EHCA=m
+CONFIG_INFINIBAND_CXGB3=m
+CONFIG_INFINIBAND_CXGB4=m
 CONFIG_MLX4_INFINIBAND=m
 CONFIG_INFINIBAND_IPOIB=m
 CONFIG_INFINIBAND_IPOIB_CM=y
-- 
cgit v0.10.2


From 8987eccde8abce02a4fc765d81a4c5de3d110ab5 Mon Sep 17 00:00:00 2001
From: Thomas Gleixner <tglx@linutronix.de>
Date: Tue, 29 Mar 2011 10:37:28 +0000
Subject: powerpc/cell: Use handle_edge_eoi_irq for real

Missed one instance when moving that to the core code.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: linuxppc-dev@lists.ozlabs.org
Cc: michael@ellerman.id.au
Cc: mingo@elte.hu
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

diff --git a/arch/powerpc/platforms/cell/interrupt.c b/arch/powerpc/platforms/cell/interrupt.c
index a19bec0..44cfd1b 100644
--- a/arch/powerpc/platforms/cell/interrupt.c
+++ b/arch/powerpc/platforms/cell/interrupt.c
@@ -244,7 +244,7 @@ static int iic_host_map(struct irq_host *h, unsigned int virq,
 		break;
 	case IIC_IRQ_TYPE_IOEXC:
 		irq_set_chip_and_handler(virq, &iic_ioexc_chip,
-					 handle_iic_irq);
+					 handle_edge_eoi_irq);
 		break;
 	default:
 		irq_set_chip_and_handler(virq, &iic_chip, handle_edge_eoi_irq);
-- 
cgit v0.10.2


From ac0e0447be3b7a3dd583193b0230bfe3ddef0442 Mon Sep 17 00:00:00 2001
From: Stephen Rothwell <sfr@canb.auug.org.au>
Date: Wed, 30 Mar 2011 10:55:12 +1100
Subject: genirq: fix CONFIG_IRQ_EDGE_EOI_HANDLER build

Fixes these errors:

  kernel/irq/chip.c: In function 'handle_edge_eoi_irq':
  kernel/irq/chip.c:517: warning: label 'out_unlock' defined but not used
  kernel/irq/chip.c:503: error: label 'out_eoi' used but not defined

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

diff --git a/kernel/irq/chip.c b/kernel/irq/chip.c
index 616ec1c..1dafc86 100644
--- a/kernel/irq/chip.c
+++ b/kernel/irq/chip.c
@@ -514,7 +514,7 @@ void handle_edge_eoi_irq(unsigned int irq, struct irq_desc *desc)
 	} while ((desc->istate & IRQS_PENDING) &&
 		 !irqd_irq_disabled(&desc->irq_data));
 
-out_unlock:
+out_eoi:
 	chip->irq_eoi(&desc->irq_data);
 	raw_spin_unlock(&desc->lock);
 }
-- 
cgit v0.10.2


From e122996ae1edf2caf19643cb79366fc2117a6188 Mon Sep 17 00:00:00 2001
From: Stephen Rothwell <sfr@canb.auug.org.au>
Date: Wed, 30 Mar 2011 10:48:28 +1100
Subject: powerpc/cell: fixup for removal of handle_iic_irq

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

diff --git a/arch/powerpc/platforms/cell/interrupt.c b/arch/powerpc/platforms/cell/interrupt.c
index a19bec0..44cfd1b 100644
--- a/arch/powerpc/platforms/cell/interrupt.c
+++ b/arch/powerpc/platforms/cell/interrupt.c
@@ -244,7 +244,7 @@ static int iic_host_map(struct irq_host *h, unsigned int virq,
 		break;
 	case IIC_IRQ_TYPE_IOEXC:
 		irq_set_chip_and_handler(virq, &iic_ioexc_chip,
-					 handle_iic_irq);
+					 handle_edge_eoi_irq);
 		break;
 	default:
 		irq_set_chip_and_handler(virq, &iic_chip, handle_edge_eoi_irq);
-- 
cgit v0.10.2


From b3cf2bb3d5de306aebfd1dfbcb0c8d33c0214046 Mon Sep 17 00:00:00 2001
From: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Date: Wed, 30 Mar 2011 11:07:13 +1100
Subject: powerpc/8xx: Fix another breakage from the irq_data conversion

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

diff --git a/arch/powerpc/sysdev/mpc8xx_pic.c b/arch/powerpc/sysdev/mpc8xx_pic.c
index f550e23..a88800f 100644
--- a/arch/powerpc/sysdev/mpc8xx_pic.c
+++ b/arch/powerpc/sysdev/mpc8xx_pic.c
@@ -80,7 +80,7 @@ static int mpc8xx_set_irq_type(struct irq_data *d, unsigned int flow_type)
 		if ((hw & 1) == 0) {
 			siel |= (0x80000000 >> hw);
 			out_be32(&siu_reg->sc_siel, siel);
-			__irq_set_handler_locked(irq, handle_edge_irq);
+			__irq_set_handler_locked(d->irq, handle_edge_irq);
 		}
 	}
 	return 0;
-- 
cgit v0.10.2


From d4db35e8dc963cf2aca15fc22cc5e5a7d98f9255 Mon Sep 17 00:00:00 2001
From: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Date: Wed, 30 Mar 2011 11:17:15 +1100
Subject: powerpc/qe_ic: Fix another breakage from the irq_data conversion

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

diff --git a/arch/powerpc/include/asm/qe_ic.h b/arch/powerpc/include/asm/qe_ic.h
index 9e2cb20..5f53dba 100644
--- a/arch/powerpc/include/asm/qe_ic.h
+++ b/arch/powerpc/include/asm/qe_ic.h
@@ -81,7 +81,7 @@ int qe_ic_set_high_priority(unsigned int virq, unsigned int priority, int high);
 static inline void qe_ic_cascade_low_ipic(unsigned int irq,
 					  struct irq_desc *desc)
 {
-	struct qe_ic *qe_ic = get_irq_desc_data(desc);
+	struct qe_ic *qe_ic = irq_desc_get_chip_data(desc);
 	unsigned int cascade_irq = qe_ic_get_low_irq(qe_ic);
 
 	if (cascade_irq != NO_IRQ)
@@ -91,7 +91,7 @@ static inline void qe_ic_cascade_low_ipic(unsigned int irq,
 static inline void qe_ic_cascade_high_ipic(unsigned int irq,
 					   struct irq_desc *desc)
 {
-	struct qe_ic *qe_ic = get_irq_desc_data(desc);
+	struct qe_ic *qe_ic = irq_desc_get_chip_data(desc);
 	unsigned int cascade_irq = qe_ic_get_high_irq(qe_ic);
 
 	if (cascade_irq != NO_IRQ)
@@ -101,9 +101,9 @@ static inline void qe_ic_cascade_high_ipic(unsigned int irq,
 static inline void qe_ic_cascade_low_mpic(unsigned int irq,
 					  struct irq_desc *desc)
 {
-	struct qe_ic *qe_ic = get_irq_desc_data(desc);
+	struct qe_ic *qe_ic = irq_desc_get_chip_data(desc);
 	unsigned int cascade_irq = qe_ic_get_low_irq(qe_ic);
-	struct irq_chip *chip = get_irq_desc_chip(desc);
+	struct irq_chip *chip = irq_desc_get_chip(desc);
 
 	if (cascade_irq != NO_IRQ)
 		generic_handle_irq(cascade_irq);
@@ -114,9 +114,9 @@ static inline void qe_ic_cascade_low_mpic(unsigned int irq,
 static inline void qe_ic_cascade_high_mpic(unsigned int irq,
 					   struct irq_desc *desc)
 {
-	struct qe_ic *qe_ic = get_irq_desc_data(desc);
+	struct qe_ic *qe_ic = irq_desc_get_chip_data(desc);
 	unsigned int cascade_irq = qe_ic_get_high_irq(qe_ic);
-	struct irq_chip *chip = get_irq_desc_chip(desc);
+	struct irq_chip *chip = irq_desc_get_chip(desc);
 
 	if (cascade_irq != NO_IRQ)
 		generic_handle_irq(cascade_irq);
@@ -127,9 +127,9 @@ static inline void qe_ic_cascade_high_mpic(unsigned int irq,
 static inline void qe_ic_cascade_muxed_mpic(unsigned int irq,
 					    struct irq_desc *desc)
 {
-	struct qe_ic *qe_ic = get_irq_desc_data(desc);
+	struct qe_ic *qe_ic = irq_desc_get_chip_data(desc);
 	unsigned int cascade_irq;
-	struct irq_chip *chip = get_irq_desc_chip(desc);
+	struct irq_chip *chip = irq_desc_get_chip(desc);
 
 	cascade_irq = qe_ic_get_high_irq(qe_ic);
 	if (cascade_irq == NO_IRQ)
-- 
cgit v0.10.2


From 5e42d10adcf717e0cf10ae5da4998d5b74889db0 Mon Sep 17 00:00:00 2001
From: Tony Luck <tony.luck@intel.com>
Date: Tue, 29 Mar 2011 17:22:23 -0700
Subject: [IA64] Fix build breakage - sn_force_interrupt_flag: undefined

Latest irq changes removed the need for this forcing flag, and the
definition - but missed the code that allowed it to be tweaked via
/proc.  Delete accessor functions too.

Signed-off-by: Tony Luck <tony.luck@intel.com>

diff --git a/arch/ia64/sn/kernel/sn2/sn_proc_fs.c b/arch/ia64/sn/kernel/sn2/sn_proc_fs.c
index c76d8dc..7aab87f 100644
--- a/arch/ia64/sn/kernel/sn2/sn_proc_fs.c
+++ b/arch/ia64/sn/kernel/sn2/sn_proc_fs.c
@@ -45,38 +45,6 @@ static int licenseID_open(struct inode *inode, struct file *file)
 	return single_open(file, licenseID_show, NULL);
 }
 
-/*
- * Enable forced interrupt by default.
- * When set, the sn interrupt handler writes the force interrupt register on
- * the bridge chip.  The hardware will then send an interrupt message if the
- * interrupt line is active.  This mimics a level sensitive interrupt.
- */
-extern int sn_force_interrupt_flag;
-
-static int sn_force_interrupt_show(struct seq_file *s, void *p)
-{
-	seq_printf(s, "Force interrupt is %s\n",
-		sn_force_interrupt_flag ? "enabled" : "disabled");
-	return 0;
-}
-
-static ssize_t sn_force_interrupt_write_proc(struct file *file,
-		const char __user *buffer, size_t count, loff_t *data)
-{
-	char val;
-
-	if (copy_from_user(&val, buffer, 1))
-		return -EFAULT;
-
-	sn_force_interrupt_flag = (val == '0') ? 0 : 1;
-	return count;
-}
-
-static int sn_force_interrupt_open(struct inode *inode, struct file *file)
-{
-	return single_open(file, sn_force_interrupt_show, NULL);
-}
-
 static int coherence_id_show(struct seq_file *s, void *p)
 {
 	seq_printf(s, "%d\n", partition_coherence_id());
@@ -114,14 +82,6 @@ static const struct file_operations proc_license_id_fops = {
 	.release	= single_release,
 };
 
-static const struct file_operations proc_sn_force_intr_fops = {
-	.open		= sn_force_interrupt_open,
-	.read		= seq_read,
-	.write		= sn_force_interrupt_write_proc,
-	.llseek		= seq_lseek,
-	.release	= single_release,
-};
-
 static const struct file_operations proc_coherence_id_fops = {
 	.open		= coherence_id_open,
 	.read		= seq_read,
@@ -149,8 +109,6 @@ void register_sn_procfs(void)
 	proc_create("system_serial_number", 0444, sgi_proc_dir,
 		    &proc_system_sn_fops);
 	proc_create("licenseID", 0444, sgi_proc_dir, &proc_license_id_fops);
-	proc_create("sn_force_interrupt", 0644, sgi_proc_dir,
-		    &proc_sn_force_intr_fops);
 	proc_create("coherence_id", 0444, sgi_proc_dir,
 		    &proc_coherence_id_fops);
 	proc_create("sn_topology", 0444, sgi_proc_dir, &proc_sn_topo_fops);
-- 
cgit v0.10.2


From c4757ee58ae08fa6eb4df6d5e0f417e11d40bc0e Mon Sep 17 00:00:00 2001
From: Axel Lin <axel.lin@gmail.com>
Date: Mon, 7 Mar 2011 11:05:33 +0800
Subject: hwmon: twl4030-madc-hwmon: add "platform:" prefix for platform
 modalias

Since 43cc71eed1250755986da4c0f9898f9a635cb3bf (platform: prefix MODALIAS
with "platform:"), the platform modalias is prefixed with "platform:".

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Cc: J Keerthy <j-keerthy@ti.com>
Cc: Samuel Ortiz <sameo@linux.intel.com>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>

diff --git a/drivers/hwmon/twl4030-madc-hwmon.c b/drivers/hwmon/twl4030-madc-hwmon.c
index 97e22be..de58191 100644
--- a/drivers/hwmon/twl4030-madc-hwmon.c
+++ b/drivers/hwmon/twl4030-madc-hwmon.c
@@ -154,4 +154,4 @@ module_exit(twl4030_madc_hwmon_exit);
 MODULE_DESCRIPTION("TWL4030 ADC Hwmon driver");
 MODULE_LICENSE("GPL");
 MODULE_AUTHOR("J Keerthy");
-MODULE_ALIAS("twl4030_madc_hwmon");
+MODULE_ALIAS("platform:twl4030_madc_hwmon");
-- 
cgit v0.10.2


From 34094537943113467faee98fe67c8a3d3f9a0a8b Mon Sep 17 00:00:00 2001
From: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Date: Sun, 27 Mar 2011 22:50:49 +0900
Subject: nilfs2: fix data loss in mmap page write for hole blocks

From the result of a function test of mmap, mmap write to shared pages
turned out to be broken for hole blocks.  It doesn't write out filled
blocks and the data will be lost after umount.  This is due to a bug
that the target file is not queued for log writer when filling hole
blocks.

Also, nilfs_page_mkwrite function exits normal code path even after
successfully filled hole blocks due to a change of block_page_mkwrite
function; just after nilfs was merged into the mainline,
block_page_mkwrite() started to return VM_FAULT_LOCKED instead of zero
by the patch "mm: close page_mkwrite races" (commit:
b827e496c893de0c).  The current nilfs_page_mkwrite() is not handling
this value properly.

This corrects nilfs_page_mkwrite() and will resolve the data loss
problem in mmap write.

[This should be applied to every kernel since 2.6.30 but a fix is
 needed for 2.6.37 and prior kernels]

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Tested-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Cc: stable <stable@kernel.org>  [2.6.38]

diff --git a/fs/nilfs2/file.c b/fs/nilfs2/file.c
index 93589fc..397e732 100644
--- a/fs/nilfs2/file.c
+++ b/fs/nilfs2/file.c
@@ -72,10 +72,9 @@ static int nilfs_page_mkwrite(struct vm_area_struct *vma, struct vm_fault *vmf)
 	/*
 	 * check to see if the page is mapped already (no holes)
 	 */
-	if (PageMappedToDisk(page)) {
-		unlock_page(page);
+	if (PageMappedToDisk(page))
 		goto mapped;
-	}
+
 	if (page_has_buffers(page)) {
 		struct buffer_head *bh, *head;
 		int fully_mapped = 1;
@@ -90,7 +89,6 @@ static int nilfs_page_mkwrite(struct vm_area_struct *vma, struct vm_fault *vmf)
 
 		if (fully_mapped) {
 			SetPageMappedToDisk(page);
-			unlock_page(page);
 			goto mapped;
 		}
 	}
@@ -105,16 +103,17 @@ static int nilfs_page_mkwrite(struct vm_area_struct *vma, struct vm_fault *vmf)
 		return VM_FAULT_SIGBUS;
 
 	ret = block_page_mkwrite(vma, vmf, nilfs_get_block);
-	if (unlikely(ret)) {
+	if (ret != VM_FAULT_LOCKED) {
 		nilfs_transaction_abort(inode->i_sb);
 		return ret;
 	}
+	nilfs_set_file_dirty(inode, 1 << (PAGE_SHIFT - inode->i_blkbits));
 	nilfs_transaction_commit(inode->i_sb);
 
  mapped:
 	SetPageChecked(page);
 	wait_on_page_writeback(page);
-	return 0;
+	return VM_FAULT_LOCKED;
 }
 
 static const struct vm_operations_struct nilfs_file_vm_ops = {
-- 
cgit v0.10.2


From 97c278e31c7c3e10a3288b53f1b0a1733eacec5a Mon Sep 17 00:00:00 2001
From: "David S. Miller" <davem@davemloft.net>
Date: Tue, 29 Mar 2011 23:09:09 -0700
Subject: sparc: Hook up syncfs system call.

Signed-off-by: David S. Miller <davem@davemloft.net>

diff --git a/arch/sparc/include/asm/unistd.h b/arch/sparc/include/asm/unistd.h
index 2f475d7..9d897b6 100644
--- a/arch/sparc/include/asm/unistd.h
+++ b/arch/sparc/include/asm/unistd.h
@@ -403,8 +403,9 @@
 #define __NR_name_to_handle_at	332
 #define __NR_open_by_handle_at	333
 #define __NR_clock_adjtime	334
+#define __NR_syncfs		335
 
-#define NR_syscalls		335
+#define NR_syscalls		336
 
 #ifdef __32bit_syscall_numbers__
 /* Sparc 32-bit only has the "setresuid32", "getresuid32" variants,
diff --git a/arch/sparc/kernel/systbls_32.S b/arch/sparc/kernel/systbls_32.S
index 4b86eaf..47ac73c 100644
--- a/arch/sparc/kernel/systbls_32.S
+++ b/arch/sparc/kernel/systbls_32.S
@@ -84,4 +84,4 @@ sys_call_table:
 /*320*/	.long sys_dup3, sys_pipe2, sys_inotify_init1, sys_accept4, sys_preadv
 /*325*/	.long sys_pwritev, sys_rt_tgsigqueueinfo, sys_perf_event_open, sys_recvmmsg, sys_fanotify_init
 /*330*/	.long sys_fanotify_mark, sys_prlimit64, sys_name_to_handle_at, sys_open_by_handle_at, sys_clock_adjtime
-
+/*335*/	.long sys_syncfs
diff --git a/arch/sparc/kernel/systbls_64.S b/arch/sparc/kernel/systbls_64.S
index 0331baf..4f3170c 100644
--- a/arch/sparc/kernel/systbls_64.S
+++ b/arch/sparc/kernel/systbls_64.S
@@ -85,6 +85,7 @@ sys_call_table32:
 /*320*/	.word sys_dup3, sys_pipe2, sys_inotify_init1, sys_accept4, compat_sys_preadv
 	.word compat_sys_pwritev, compat_sys_rt_tgsigqueueinfo, sys_perf_event_open, compat_sys_recvmmsg, sys_fanotify_init
 /*330*/	.word sys32_fanotify_mark, sys_prlimit64, sys_name_to_handle_at, compat_sys_open_by_handle_at, compat_sys_clock_adjtime
+	.word sys_syncfs
 
 #endif /* CONFIG_COMPAT */
 
@@ -161,3 +162,4 @@ sys_call_table:
 /*320*/	.word sys_dup3, sys_pipe2, sys_inotify_init1, sys_accept4, sys_preadv
 	.word sys_pwritev, sys_rt_tgsigqueueinfo, sys_perf_event_open, sys_recvmmsg, sys_fanotify_init
 /*330*/	.word sys_fanotify_mark, sys_prlimit64, sys_name_to_handle_at, sys_open_by_handle_at, sys_clock_adjtime
+	.word sys_syncfs
-- 
cgit v0.10.2


From eec009548e98f6b6d514ff5bb8a8627b8dd17a49 Mon Sep 17 00:00:00 2001
From: "David S. Miller" <davem@davemloft.net>
Date: Tue, 29 Mar 2011 23:34:08 -0700
Subject: net: Fix warnings caused by MAX_SKB_FRAGS change.
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

After commit a715dea3c8e9ef2771c534e05ee1d36f65987e64 ("net: Always
allocate at least 16 skb frags regardless of page size"), the value
of MAX_SKB_FRAGS can now take on either an "unsigned long" or an
"int" value.

This causes warnings like:

net/packet/af_packet.c: In function ‘tpacket_fill_skb’:
net/packet/af_packet.c:948: warning: format ‘%lu’ expects type ‘long unsigned int’, but argument 2 has type ‘int’

Fix by forcing the constant to be unsigned long, otherwise we have
a situation where the type of a system wide constant is variable.

Signed-off-by: David S. Miller <davem@davemloft.net>

diff --git a/include/linux/skbuff.h b/include/linux/skbuff.h
index 239083b..d9e52fa 100644
--- a/include/linux/skbuff.h
+++ b/include/linux/skbuff.h
@@ -126,7 +126,7 @@ struct sk_buff;
  * GRO uses frags we allocate at least 16 regardless of page size.
  */
 #if (65536/PAGE_SIZE + 2) < 16
-#define MAX_SKB_FRAGS 16
+#define MAX_SKB_FRAGS 16UL
 #else
 #define MAX_SKB_FRAGS (65536/PAGE_SIZE + 2)
 #endif
-- 
cgit v0.10.2


From 1459a3cc51d90d78027c7b5c1790e5d22751c8eb Mon Sep 17 00:00:00 2001
From: Balaji G <balajig81@gmail.com>
Date: Tue, 29 Mar 2011 06:20:04 +0000
Subject: bridge: Fix compilation warning in function
 br_stp_recalculate_bridge_id()
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

net/bridge/br_stp_if.c: In function ‘br_stp_recalculate_bridge_id’:
net/bridge/br_stp_if.c:216:3: warning: ‘return’ with no value, in function returning non-void

Signed-off-by: G.Balaji <balajig81@gmail.com>
Acked-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

diff --git a/net/bridge/br_stp_if.c b/net/bridge/br_stp_if.c
index 5593f5a..9b61d09 100644
--- a/net/bridge/br_stp_if.c
+++ b/net/bridge/br_stp_if.c
@@ -213,7 +213,7 @@ bool br_stp_recalculate_bridge_id(struct net_bridge *br)
 
 	/* user has chosen a value so keep it */
 	if (br->flags & BR_SET_MAC_ADDR)
-		return;
+		return false;
 
 	list_for_each_entry(p, &br->port_list, list) {
 		if (addr == br_mac_zero ||
-- 
cgit v0.10.2


From 6ff674615c91d942e4cfb4880c14733b616c9032 Mon Sep 17 00:00:00 2001
From: Clemens Ladisch <clemens@ladisch.de>
Date: Wed, 30 Mar 2011 08:24:00 +0200
Subject: ALSA: firewire-speakers: fix hang when unplugging a running device

When aborting a PCM stream, the xrun is signaled only if the stream is
running.  When disconnecting a PCM stream, calling snd_card_disconnect()
too early would change the stream into a non-running state and thus
prevent the xrun from being noticed by user space.

To prevent this, move the snd_card_disconnect() call after the xrun.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

diff --git a/sound/firewire/speakers.c b/sound/firewire/speakers.c
index 0fce921..5466de8 100644
--- a/sound/firewire/speakers.c
+++ b/sound/firewire/speakers.c
@@ -778,10 +778,9 @@ static int __devexit fwspk_remove(struct device *dev)
 {
 	struct fwspk *fwspk = dev_get_drvdata(dev);
 
-	snd_card_disconnect(fwspk->card);
-
 	mutex_lock(&fwspk->mutex);
 	amdtp_out_stream_pcm_abort(&fwspk->stream);
+	snd_card_disconnect(fwspk->card);
 	fwspk_stop_stream(fwspk);
 	mutex_unlock(&fwspk->mutex);
 
-- 
cgit v0.10.2


From 6ebb8a4a43e34f999ab36f27f972f3cd751cda4f Mon Sep 17 00:00:00 2001
From: Clemens Ladisch <clemens@ladisch.de>
Date: Wed, 30 Mar 2011 08:24:25 +0200
Subject: ALSA: ens1371: fix Creative Ectiva support

To make the EV1938 chip work, add a magic bit and an extra delay.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Tested-by: Tino Schmidt <mailtinoshomepage@gmx.net>
Cc: all 2.6.x <stable@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

diff --git a/sound/pci/ens1370.c b/sound/pci/ens1370.c
index 537cfba..863eafe 100644
--- a/sound/pci/ens1370.c
+++ b/sound/pci/ens1370.c
@@ -229,6 +229,7 @@ MODULE_PARM_DESC(lineio, "Line In to Rear Out (0 = auto, 1 = force).");
 #define ES_REG_1371_CODEC 0x14	/* W/R: Codec Read/Write register address */
 #define   ES_1371_CODEC_RDY	   (1<<31)	/* codec ready */
 #define   ES_1371_CODEC_WIP	   (1<<30)	/* codec register access in progress */
+#define   EV_1938_CODEC_MAGIC	   (1<<26)
 #define   ES_1371_CODEC_PIRD	   (1<<23)	/* codec read/write select register */
 #define   ES_1371_CODEC_WRITE(a,d) ((((a)&0x7f)<<16)|(((d)&0xffff)<<0))
 #define   ES_1371_CODEC_READS(a)   ((((a)&0x7f)<<16)|ES_1371_CODEC_PIRD)
@@ -603,12 +604,18 @@ static void snd_es1370_codec_write(struct snd_ak4531 *ak4531,
 
 #ifdef CHIP1371
 
+static inline bool is_ev1938(struct ensoniq *ensoniq)
+{
+	return ensoniq->pci->device == 0x8938;
+}
+
 static void snd_es1371_codec_write(struct snd_ac97 *ac97,
 				   unsigned short reg, unsigned short val)
 {
 	struct ensoniq *ensoniq = ac97->private_data;
-	unsigned int t, x;
+	unsigned int t, x, flag;
 
+	flag = is_ev1938(ensoniq) ? EV_1938_CODEC_MAGIC : 0;
 	mutex_lock(&ensoniq->src_mutex);
 	for (t = 0; t < POLL_COUNT; t++) {
 		if (!(inl(ES_REG(ensoniq, 1371_CODEC)) & ES_1371_CODEC_WIP)) {
@@ -630,7 +637,8 @@ static void snd_es1371_codec_write(struct snd_ac97 *ac97,
 				    0x00010000)
 					break;
 			}
-			outl(ES_1371_CODEC_WRITE(reg, val), ES_REG(ensoniq, 1371_CODEC));
+			outl(ES_1371_CODEC_WRITE(reg, val) | flag,
+			     ES_REG(ensoniq, 1371_CODEC));
 			/* restore SRC reg */
 			snd_es1371_wait_src_ready(ensoniq);
 			outl(x, ES_REG(ensoniq, 1371_SMPRATE));
@@ -647,8 +655,9 @@ static unsigned short snd_es1371_codec_read(struct snd_ac97 *ac97,
 					    unsigned short reg)
 {
 	struct ensoniq *ensoniq = ac97->private_data;
-	unsigned int t, x, fail = 0;
+	unsigned int t, x, flag, fail = 0;
 
+	flag = is_ev1938(ensoniq) ? EV_1938_CODEC_MAGIC : 0;
       __again:
 	mutex_lock(&ensoniq->src_mutex);
 	for (t = 0; t < POLL_COUNT; t++) {
@@ -671,7 +680,8 @@ static unsigned short snd_es1371_codec_read(struct snd_ac97 *ac97,
 				    0x00010000)
 					break;
 			}
-			outl(ES_1371_CODEC_READS(reg), ES_REG(ensoniq, 1371_CODEC));
+			outl(ES_1371_CODEC_READS(reg) | flag,
+			     ES_REG(ensoniq, 1371_CODEC));
 			/* restore SRC reg */
 			snd_es1371_wait_src_ready(ensoniq);
 			outl(x, ES_REG(ensoniq, 1371_SMPRATE));
@@ -683,6 +693,11 @@ static unsigned short snd_es1371_codec_read(struct snd_ac97 *ac97,
 			/* now wait for the stinkin' data (RDY) */
 			for (t = 0; t < POLL_COUNT; t++) {
 				if ((x = inl(ES_REG(ensoniq, 1371_CODEC))) & ES_1371_CODEC_RDY) {
+					if (is_ev1938(ensoniq)) {
+						for (t = 0; t < 100; t++)
+							inl(ES_REG(ensoniq, CONTROL));
+						x = inl(ES_REG(ensoniq, 1371_CODEC));
+					}
 					mutex_unlock(&ensoniq->src_mutex);
 					return ES_1371_CODEC_READ(x);
 				}
-- 
cgit v0.10.2


From 93ca3bb5df9bc8b2c60485e1cc6507c3d7c8e1fa Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Timo=20Ter=C3=A4s?= <timo.teras@iki.fi>
Date: Mon, 28 Mar 2011 22:40:53 +0000
Subject: net: gre: provide multicast mappings for ipv4 and ipv6
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

My commit 6d55cb91a0020ac0 (gre: fix hard header destination
address checking) broke multicast.

The reason is that ip_gre used to get ipgre_header() calls with
zero destination if we have NOARP or multicast destination. Instead
the actual target was decided at ipgre_tunnel_xmit() time based on
per-protocol dissection.

Instead of allowing the "abuse" of ->header() calls with invalid
destination, this creates multicast mappings for ip_gre. This also
fixes "ip neigh show nud noarp" to display the proper multicast
mappings used by the gre device.

Reported-by: Doug Kehn <rdkehn@yahoo.com>
Signed-off-by: Timo Teräs <timo.teras@iki.fi>
Acked-by: Doug Kehn <rdkehn@yahoo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

diff --git a/include/net/if_inet6.h b/include/net/if_inet6.h
index 04977ee..fccc218 100644
--- a/include/net/if_inet6.h
+++ b/include/net/if_inet6.h
@@ -286,5 +286,21 @@ static inline void ipv6_ib_mc_map(const struct in6_addr *addr,
 	buf[9]  = broadcast[9];
 	memcpy(buf + 10, addr->s6_addr + 6, 10);
 }
+
+static inline int ipv6_ipgre_mc_map(const struct in6_addr *addr,
+				    const unsigned char *broadcast, char *buf)
+{
+	if ((broadcast[0] | broadcast[1] | broadcast[2] | broadcast[3]) != 0) {
+		memcpy(buf, broadcast, 4);
+	} else {
+		/* v4mapped? */
+		if ((addr->s6_addr32[0] | addr->s6_addr32[1] |
+		     (addr->s6_addr32[2] ^ htonl(0x0000ffff))) != 0)
+			return -EINVAL;
+		memcpy(buf, &addr->s6_addr32[3], 4);
+	}
+	return 0;
+}
+
 #endif
 #endif
diff --git a/include/net/ip.h b/include/net/ip.h
index a4f6311..7c41658 100644
--- a/include/net/ip.h
+++ b/include/net/ip.h
@@ -339,6 +339,14 @@ static inline void ip_ib_mc_map(__be32 naddr, const unsigned char *broadcast, ch
 	buf[16] = addr & 0x0f;
 }
 
+static inline void ip_ipgre_mc_map(__be32 naddr, const unsigned char *broadcast, char *buf)
+{
+	if ((broadcast[0] | broadcast[1] | broadcast[2] | broadcast[3]) != 0)
+		memcpy(buf, broadcast, 4);
+	else
+		memcpy(buf, &naddr, sizeof(naddr));
+}
+
 #if defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE)
 #include <linux/ipv6.h>
 #endif
diff --git a/net/ipv4/arp.c b/net/ipv4/arp.c
index 090d273..1b74d3b 100644
--- a/net/ipv4/arp.c
+++ b/net/ipv4/arp.c
@@ -215,6 +215,9 @@ int arp_mc_map(__be32 addr, u8 *haddr, struct net_device *dev, int dir)
 	case ARPHRD_INFINIBAND:
 		ip_ib_mc_map(addr, dev->broadcast, haddr);
 		return 0;
+	case ARPHRD_IPGRE:
+		ip_ipgre_mc_map(addr, dev->broadcast, haddr);
+		return 0;
 	default:
 		if (dir) {
 			memcpy(haddr, dev->broadcast, dev->addr_len);
diff --git a/net/ipv6/ndisc.c b/net/ipv6/ndisc.c
index 0e49c9d..92f952d 100644
--- a/net/ipv6/ndisc.c
+++ b/net/ipv6/ndisc.c
@@ -341,6 +341,8 @@ int ndisc_mc_map(struct in6_addr *addr, char *buf, struct net_device *dev, int d
 	case ARPHRD_INFINIBAND:
 		ipv6_ib_mc_map(addr, dev->broadcast, buf);
 		return 0;
+	case ARPHRD_IPGRE:
+		return ipv6_ipgre_mc_map(addr, dev->broadcast, buf);
 	default:
 		if (dir) {
 			memcpy(buf, dev->broadcast, dev->addr_len);
-- 
cgit v0.10.2


From abc45592bce8267a8e651c12ce94a1f83eaac7a6 Mon Sep 17 00:00:00 2001
From: Ben Hutchings <ben@decadent.org.uk>
Date: Mon, 28 Mar 2011 17:10:43 +0000
Subject: via-ircc: Use pci_{get, set}_drvdata() instead of static pointer
 variable

via-ircc still maintains its own array of device pointers in Linux 2.4
style.  Worse, it always uses index 0, so it will crash if there are
multiple suitable devices in the system.

Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>

diff --git a/drivers/net/irda/via-ircc.c b/drivers/net/irda/via-ircc.c
index 67c0ad4..cc6faca 100644
--- a/drivers/net/irda/via-ircc.c
+++ b/drivers/net/irda/via-ircc.c
@@ -75,15 +75,9 @@ static int dongle_id = 0;	/* default: probe */
 /* We can't guess the type of connected dongle, user *must* supply it. */
 module_param(dongle_id, int, 0);
 
-/* FIXME : we should not need this, because instances should be automatically
- * managed by the PCI layer. Especially that we seem to only be using the
- * first entry. Jean II */
-/* Max 4 instances for now */
-static struct via_ircc_cb *dev_self[] = { NULL, NULL, NULL, NULL };
-
 /* Some prototypes */
-static int via_ircc_open(int i, chipio_t * info, unsigned int id);
-static int via_ircc_close(struct via_ircc_cb *self);
+static int via_ircc_open(struct pci_dev *pdev, chipio_t * info,
+			 unsigned int id);
 static int via_ircc_dma_receive(struct via_ircc_cb *self);
 static int via_ircc_dma_receive_complete(struct via_ircc_cb *self,
 					 int iobase);
@@ -215,7 +209,7 @@ static int __devinit via_init_one (struct pci_dev *pcidev, const struct pci_devi
 			pci_write_config_byte(pcidev,0x42,(bTmp | 0xf0));
 			pci_write_config_byte(pcidev,0x5a,0xc0);
 			WriteLPCReg(0x28, 0x70 );
-			if (via_ircc_open(0, &info,0x3076) == 0)
+			if (via_ircc_open(pcidev, &info, 0x3076) == 0)
 				rc=0;
 		} else
 			rc = -ENODEV; //IR not turn on	 
@@ -254,7 +248,7 @@ static int __devinit via_init_one (struct pci_dev *pcidev, const struct pci_devi
 			info.irq=FirIRQ;
 			info.dma=FirDRQ1;
 			info.dma2=FirDRQ0;
-			if (via_ircc_open(0, &info,0x3096) == 0)
+			if (via_ircc_open(pcidev, &info, 0x3096) == 0)
 				rc=0;
 		} else
 			rc = -ENODEV; //IR not turn on !!!!!
@@ -264,48 +258,10 @@ static int __devinit via_init_one (struct pci_dev *pcidev, const struct pci_devi
 	return rc;
 }
 
-/*
- * Function via_ircc_clean ()
- *
- *    Close all configured chips
- *
- */
-static void via_ircc_clean(void)
-{
-	int i;
-
-	IRDA_DEBUG(3, "%s()\n", __func__);
-
-	for (i=0; i < ARRAY_SIZE(dev_self); i++) {
-		if (dev_self[i])
-			via_ircc_close(dev_self[i]);
-	}
-}
-
-static void __devexit via_remove_one (struct pci_dev *pdev)
-{
-	IRDA_DEBUG(3, "%s()\n", __func__);
-
-	/* FIXME : This is ugly. We should use pci_get_drvdata(pdev);
-	 * to get our driver instance and call directly via_ircc_close().
-	 * See vlsi_ir for details...
-	 * Jean II */
-	via_ircc_clean();
-
-	/* FIXME : This should be in via_ircc_close(), because here we may
-	 * theoritically disable still configured devices :-( - Jean II */
-	pci_disable_device(pdev);
-}
-
 static void __exit via_ircc_cleanup(void)
 {
 	IRDA_DEBUG(3, "%s()\n", __func__);
 
-	/* FIXME : This should be redundant, as pci_unregister_driver()
-	 * should call via_remove_one() on each device.
-	 * Jean II */
-	via_ircc_clean();
-
 	/* Cleanup all instances of the driver */
 	pci_unregister_driver (&via_driver); 
 }
@@ -324,12 +280,13 @@ static const struct net_device_ops via_ircc_fir_ops = {
 };
 
 /*
- * Function via_ircc_open (iobase, irq)
+ * Function via_ircc_open(pdev, iobase, irq)
  *
  *    Open driver instance
  *
  */
-static __devinit int via_ircc_open(int i, chipio_t * info, unsigned int id)
+static __devinit int via_ircc_open(struct pci_dev *pdev, chipio_t * info,
+				   unsigned int id)
 {
 	struct net_device *dev;
 	struct via_ircc_cb *self;
@@ -337,9 +294,6 @@ static __devinit int via_ircc_open(int i, chipio_t * info, unsigned int id)
 
 	IRDA_DEBUG(3, "%s()\n", __func__);
 
-	if (i >= ARRAY_SIZE(dev_self))
-		return -ENOMEM;
-
 	/* Allocate new instance of the driver */
 	dev = alloc_irdadev(sizeof(struct via_ircc_cb));
 	if (dev == NULL) 
@@ -349,13 +303,8 @@ static __devinit int via_ircc_open(int i, chipio_t * info, unsigned int id)
 	self->netdev = dev;
 	spin_lock_init(&self->lock);
 
-	/* FIXME : We should store our driver instance in the PCI layer,
-	 * using pci_set_drvdata(), not in this array.
-	 * See vlsi_ir for details... - Jean II */
-	/* FIXME : 'i' is always 0 (see via_init_one()) :-( - Jean II */
-	/* Need to store self somewhere */
-	dev_self[i] = self;
-	self->index = i;
+	pci_set_drvdata(pdev, self);
+
 	/* Initialize Resource */
 	self->io.cfg_base = info->cfg_base;
 	self->io.fir_base = info->fir_base;
@@ -463,25 +412,24 @@ static __devinit int via_ircc_open(int i, chipio_t * info, unsigned int id)
  err_out2:
 	release_region(self->io.fir_base, self->io.fir_ext);
  err_out1:
+	pci_set_drvdata(pdev, NULL);
 	free_netdev(dev);
-	dev_self[i] = NULL;
 	return err;
 }
 
 /*
- * Function via_ircc_close (self)
+ * Function via_remove_one(pdev)
  *
  *    Close driver instance
  *
  */
-static int via_ircc_close(struct via_ircc_cb *self)
+static void __devexit via_remove_one(struct pci_dev *pdev)
 {
+	struct via_ircc_cb *self = pci_get_drvdata(pdev);
 	int iobase;
 
 	IRDA_DEBUG(3, "%s()\n", __func__);
 
-	IRDA_ASSERT(self != NULL, return -1;);
-
 	iobase = self->io.fir_base;
 
 	ResetChip(iobase, 5);	//hardware reset.
@@ -498,11 +446,11 @@ static int via_ircc_close(struct via_ircc_cb *self)
 	if (self->rx_buff.head)
 		dma_free_coherent(NULL, self->rx_buff.truesize,
 				  self->rx_buff.head, self->rx_buff_dma);
-	dev_self[self->index] = NULL;
+	pci_set_drvdata(pdev, NULL);
 
 	free_netdev(self->netdev);
 
-	return 0;
+	pci_disable_device(pdev);
 }
 
 /*
-- 
cgit v0.10.2


From fd1d9188f2cb81fe63c789d9f5463dca402ade12 Mon Sep 17 00:00:00 2001
From: Ben Hutchings <ben@decadent.org.uk>
Date: Mon, 28 Mar 2011 17:12:52 +0000
Subject: via-ircc: Pass PCI device pointer to dma_{alloc, free}_coherent()

via-ircc has been passing a NULL pointer to DMA allocation functions,
which is completely invalid and results in a BUG on PowerPC.  Now
that we always have the device pointer available, pass it in.

Reference: http://bugs.debian.org/619450
Reported-by: Andrew Buckeridge <andrewb@bgc.com.au>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Tested-by: Andrew Buckeridge <andrewb@bgc.com.au> [against 2.6.32]
Signed-off-by: David S. Miller <davem@davemloft.net>

diff --git a/drivers/net/irda/via-ircc.c b/drivers/net/irda/via-ircc.c
index cc6faca..186cd28 100644
--- a/drivers/net/irda/via-ircc.c
+++ b/drivers/net/irda/via-ircc.c
@@ -363,7 +363,7 @@ static __devinit int via_ircc_open(struct pci_dev *pdev, chipio_t * info,
 
 	/* Allocate memory if needed */
 	self->rx_buff.head =
-		dma_alloc_coherent(NULL, self->rx_buff.truesize,
+		dma_alloc_coherent(&pdev->dev, self->rx_buff.truesize,
 				   &self->rx_buff_dma, GFP_KERNEL);
 	if (self->rx_buff.head == NULL) {
 		err = -ENOMEM;
@@ -372,7 +372,7 @@ static __devinit int via_ircc_open(struct pci_dev *pdev, chipio_t * info,
 	memset(self->rx_buff.head, 0, self->rx_buff.truesize);
 
 	self->tx_buff.head =
-		dma_alloc_coherent(NULL, self->tx_buff.truesize,
+		dma_alloc_coherent(&pdev->dev, self->tx_buff.truesize,
 				   &self->tx_buff_dma, GFP_KERNEL);
 	if (self->tx_buff.head == NULL) {
 		err = -ENOMEM;
@@ -404,10 +404,10 @@ static __devinit int via_ircc_open(struct pci_dev *pdev, chipio_t * info,
 	via_hw_init(self);
 	return 0;
  err_out4:
-	dma_free_coherent(NULL, self->tx_buff.truesize,
+	dma_free_coherent(&pdev->dev, self->tx_buff.truesize,
 			  self->tx_buff.head, self->tx_buff_dma);
  err_out3:
-	dma_free_coherent(NULL, self->rx_buff.truesize,
+	dma_free_coherent(&pdev->dev, self->rx_buff.truesize,
 			  self->rx_buff.head, self->rx_buff_dma);
  err_out2:
 	release_region(self->io.fir_base, self->io.fir_ext);
@@ -441,10 +441,10 @@ static void __devexit via_remove_one(struct pci_dev *pdev)
 		   __func__, self->io.fir_base);
 	release_region(self->io.fir_base, self->io.fir_ext);
 	if (self->tx_buff.head)
-		dma_free_coherent(NULL, self->tx_buff.truesize,
+		dma_free_coherent(&pdev->dev, self->tx_buff.truesize,
 				  self->tx_buff.head, self->tx_buff_dma);
 	if (self->rx_buff.head)
-		dma_free_coherent(NULL, self->rx_buff.truesize,
+		dma_free_coherent(&pdev->dev, self->rx_buff.truesize,
 				  self->rx_buff.head, self->rx_buff_dma);
 	pci_set_drvdata(pdev, NULL);
 
-- 
cgit v0.10.2


From d611b22f1a5ddd0823e9d6a30bac91219f800e41 Mon Sep 17 00:00:00 2001
From: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Date: Wed, 30 Mar 2011 11:49:20 +0900
Subject: nilfs2: fix oops due to a bad aops initialization

Nilfs in 2.6.39-rc1 hit the following oops:

 BUG: unable to handle kernel NULL pointer dereference at 0000000000000048
 IP: [<ffffffff810ac235>] try_to_release_page+0x2a/0x3d
 PGD 234cb6067 PUD 234c72067 PMD 0
 Oops: 0000 [#1] SMP
 <snip>
 Process truncate (pid: 10995, threadinfo ffff8802353c2000, task ffff880234cfa000)
 Stack:
  ffff8802333c77b8 ffffffff810b64b0 0000000000003802 ffffffffa0052cca
  0000000000000000 ffff8802353c3b58 0000000000000000 ffff8802353c3b58
  0000000000000001 0000000000000000 ffffea0007b92308 ffffea0007b92308
 Call Trace:
  [<ffffffff810b64b0>] ? invalidate_inode_pages2_range+0x15f/0x273
  [<ffffffffa0052cca>] ? nilfs_palloc_get_block+0x2d/0xaf [nilfs2]
  [<ffffffff810589e7>] ? bit_waitqueue+0x14/0xa1
  [<ffffffff81058ab1>] ? wake_up_bit+0x10/0x20
  [<ffffffffa00433fd>] ? nilfs_forget_buffer+0x66/0x7a [nilfs2]
  [<ffffffffa00467b8>] ? nilfs_btree_concat_left+0x5c/0x77 [nilfs2]
  [<ffffffffa00471fc>] ? nilfs_btree_delete+0x395/0x3cf [nilfs2]
  [<ffffffffa00449a3>] ? nilfs_bmap_do_delete+0x6e/0x79 [nilfs2]
  [<ffffffffa0045845>] ? nilfs_btree_last_key+0x14b/0x15e [nilfs2]
  [<ffffffffa00449dd>] ? nilfs_bmap_truncate+0x2f/0x83 [nilfs2]
  [<ffffffffa0044ab2>] ? nilfs_bmap_last_key+0x35/0x62 [nilfs2]
  [<ffffffffa003e99b>] ? nilfs_truncate_bmap+0x6b/0xc7 [nilfs2]
  [<ffffffffa003ee4a>] ? nilfs_truncate+0x79/0xe4 [nilfs2]
  [<ffffffff810b6c00>] ? vmtruncate+0x33/0x3b
  [<ffffffffa003e8f1>] ? nilfs_setattr+0x4d/0x8c [nilfs2]
  [<ffffffff81026106>] ? do_page_fault+0x31b/0x356
  [<ffffffff810f9d61>] ? notify_change+0x17d/0x262
  [<ffffffff810e5046>] ? do_truncate+0x65/0x80
  [<ffffffff810e52af>] ? sys_ftruncate+0xf1/0xf6
  [<ffffffff8132c012>] ? system_call_fastpath+0x16/0x1b
 Code: c3 48 83 ec 08 48 8b 17 48 8b 47 18 80 e2 01 75 04 0f 0b eb fe 48 8b 17 80 e6 20 74 05 31 c0 41 59 c3 48 85 c0 74 11 48 8b 40 58
  8b 40 48 48 85 c0 74 04 41 58 ff e0 59 e9 b1 b5 05 00 41 54
 RIP  [<ffffffff810ac235>] try_to_release_page+0x2a/0x3d
  RSP <ffff8802353c3b08>
 CR2: 0000000000000048

This oops was brought in by the change "block: remove per-queue
plugging" (commit: 7eaceaccab5f40bb).  It initializes mapping->a_ops
with a NULL pointer for some pages in nilfs (e.g. btree node pages),
but mm code doesn't NULL pointer checks against mapping->a_ops. (the
check is done for each callback function)

This corrects the aops initialization and fixes the oops.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Acked-by: Jens Axboe <jaxboe@fusionio.com>

diff --git a/fs/nilfs2/page.c b/fs/nilfs2/page.c
index 4d2a1ee..9d2dc6b 100644
--- a/fs/nilfs2/page.c
+++ b/fs/nilfs2/page.c
@@ -495,12 +495,14 @@ unsigned nilfs_page_count_clean_buffers(struct page *page,
 void nilfs_mapping_init(struct address_space *mapping,
 			struct backing_dev_info *bdi)
 {
+	static const struct address_space_operations empty_aops;
+
 	mapping->host = NULL;
 	mapping->flags = 0;
 	mapping_set_gfp_mask(mapping, GFP_NOFS);
 	mapping->assoc_mapping = NULL;
 	mapping->backing_dev_info = bdi;
-	mapping->a_ops = NULL;
+	mapping->a_ops = &empty_aops;
 }
 
 /*
-- 
cgit v0.10.2


From af71dda0b8e667d03eec21d25f90265eec5efea1 Mon Sep 17 00:00:00 2001
From: Nicolas Kaiser <nikai@nikai.net>
Date: Sat, 19 Mar 2011 16:47:54 +0100
Subject: nilfs2: fix whitespace coding style issues

Fixes whitespace coding style issues.

Signed-off-by: Nicolas Kaiser <nikai@nikai.net>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>

diff --git a/fs/nilfs2/nilfs.h b/fs/nilfs2/nilfs.h
index 856e8e4..a8dd344 100644
--- a/fs/nilfs2/nilfs.h
+++ b/fs/nilfs2/nilfs.h
@@ -114,19 +114,19 @@ enum {
  * Macros to check inode numbers
  */
 #define NILFS_MDT_INO_BITS   \
-  ((unsigned int)(1 << NILFS_DAT_INO | 1 << NILFS_CPFILE_INO |		\
-		  1 << NILFS_SUFILE_INO | 1 << NILFS_IFILE_INO |	\
-		  1 << NILFS_ATIME_INO | 1 << NILFS_SKETCH_INO))
+	((unsigned int)(1 << NILFS_DAT_INO | 1 << NILFS_CPFILE_INO |	\
+			1 << NILFS_SUFILE_INO | 1 << NILFS_IFILE_INO |	\
+			1 << NILFS_ATIME_INO | 1 << NILFS_SKETCH_INO))
 
 #define NILFS_SYS_INO_BITS   \
-  ((unsigned int)(1 << NILFS_ROOT_INO) | NILFS_MDT_INO_BITS)
+	((unsigned int)(1 << NILFS_ROOT_INO) | NILFS_MDT_INO_BITS)
 
 #define NILFS_FIRST_INO(sb) (((struct the_nilfs *)sb->s_fs_info)->ns_first_ino)
 
 #define NILFS_MDT_INODE(sb, ino) \
-  ((ino) < NILFS_FIRST_INO(sb) && (NILFS_MDT_INO_BITS & (1 << (ino))))
+	((ino) < NILFS_FIRST_INO(sb) && (NILFS_MDT_INO_BITS & (1 << (ino))))
 #define NILFS_VALID_INODE(sb, ino) \
-  ((ino) >= NILFS_FIRST_INO(sb) || (NILFS_SYS_INO_BITS & (1 << (ino))))
+	((ino) >= NILFS_FIRST_INO(sb) || (NILFS_SYS_INO_BITS & (1 << (ino))))
 
 /**
  * struct nilfs_transaction_info: context information for synchronization
@@ -285,7 +285,7 @@ extern void nilfs_destroy_inode(struct inode *);
 extern void nilfs_error(struct super_block *, const char *, const char *, ...)
 	__attribute__ ((format (printf, 3, 4)));
 extern void nilfs_warning(struct super_block *, const char *, const char *, ...)
-       __attribute__ ((format (printf, 3, 4)));
+	__attribute__ ((format (printf, 3, 4)));
 extern struct nilfs_super_block *
 nilfs_read_super_block(struct super_block *, u64, int, struct buffer_head **);
 extern int nilfs_store_magic_and_option(struct super_block *,
-- 
cgit v0.10.2


From ff9a57a62afbbe2d0f3a09af321f1fd7645f38a5 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Linus=20L=C3=BCssing?= <linus.luessing@web.de>
Date: Sat, 26 Mar 2011 20:27:24 +0000
Subject: bridge: mcast snooping, fix length check of snooped MLDv1/2
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

"len = ntohs(ip6h->payload_len)" does not include the length of the ipv6
header itself, which the rest of this function assumes, though.

This leads to a length check less restrictive as it should be in the
following line for one thing. For another, it very likely leads to an
integer underrun when substracting the offset and therefore to a very
high new value of 'len' due to its unsignedness. This will ultimately
lead to the pskb_trim_rcsum() practically never being called, even in
the cases where it should.

Signed-off-by: Linus Lüssing <linus.luessing@web.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

diff --git a/net/bridge/br_multicast.c b/net/bridge/br_multicast.c
index f61eb2e..59660c9 100644
--- a/net/bridge/br_multicast.c
+++ b/net/bridge/br_multicast.c
@@ -1475,7 +1475,7 @@ static int br_multicast_ipv6_rcv(struct net_bridge *br,
 	    ip6h->payload_len == 0)
 		return 0;
 
-	len = ntohs(ip6h->payload_len);
+	len = ntohs(ip6h->payload_len) + sizeof(*ip6h);
 	if (skb->len < len)
 		return -EINVAL;
 
-- 
cgit v0.10.2


From d005a09edf8b12dd1bec651b2cf94caa0e7bb1be Mon Sep 17 00:00:00 2001
From: Marc Kleine-Budde <mkl@pengutronix.de>
Date: Mon, 28 Mar 2011 14:54:08 +0000
Subject: phylib: phy_attach_direct: phy_init_hw can fail, add cleanup

The function phy_attach_direct attaches the phy and calls phy_init_hw.
phy_init_hw can fail, but the phy is still marked as attached. Successive
calls to phy_attach_direct will fail because the phy is busy.

[    1.020000] eth0: Freescale FEC PHY driver [Generic PHY] (mii_bus:phy_addr=1:00, irq=-1)
[    1.030000] eth1: Freescale FEC PHY driver [Generic PHY] (mii_bus:phy_addr=1:01, irq=-1)
[    2.050000] Sending DHCP requests .
[    3.020000] PHY: 1:00 - Link is Up - 100/Full
[    5.110000] ..... timed out!
[   87.660000] IP-Config: Reopening network devices...
[   88.190000] FEC: MDIO read timeout
[   88.190000] eth0: could not attach to PHY
[   88.190000] IP-Config: Failed to open eth0
[   88.210000] FEC: MDIO read timeout
[   88.210000] eth1: could not attach to PHY
[   88.210000] IP-Config: Failed to open eth1
[   88.220000] IP-Config: No network devices available.
[   88.220000] Freeing init memory: 6968K

[...]

starting network interfaces...
ip: RTNETLINK answers: File exists
[   94.000000] net eth0: PHY already attached
[   94.010000] eth0: could not attach to PHY
ip: SIOCSIFFLAGS: Device or resource busy

This patch adds phy_detach to clean up if phy_init_hw fails.

Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c
index 993c52c..e870c06 100644
--- a/drivers/net/phy/phy_device.c
+++ b/drivers/net/phy/phy_device.c
@@ -442,11 +442,11 @@ static int phy_attach_direct(struct net_device *dev, struct phy_device *phydev,
 			     u32 flags, phy_interface_t interface)
 {
 	struct device *d = &phydev->dev;
+	int err;
 
 	/* Assume that if there is no driver, that it doesn't
 	 * exist, and we should use the genphy driver. */
 	if (NULL == d->driver) {
-		int err;
 		d->driver = &genphy_driver.driver;
 
 		err = d->driver->probe(d);
@@ -474,7 +474,11 @@ static int phy_attach_direct(struct net_device *dev, struct phy_device *phydev,
 	/* Do initial configuration here, now that
 	 * we have certain key parameters
 	 * (dev_flags and interface) */
-	return phy_init_hw(phydev);
+	err = phy_init_hw(phydev);
+	if (err)
+		phy_detach(phydev);
+
+	return err;
 }
 
 /**
-- 
cgit v0.10.2


From 7a635ea989991d7f12d57a12f2ba7cb6d211e083 Mon Sep 17 00:00:00 2001
From: Andrzej Zaborowski <andrew.zaborowski@intel.com>
Date: Mon, 28 Mar 2011 12:56:33 +0000
Subject: net/usb: Ethernet quirks for the LG-VL600 4G modem

This adds a driver for the CDC Ethernet part of this modem.  The
device's ID is blacklisted in cdc_ether.c and is white-listed in
this new driver because of the quirks needed to make it useful.
The modem's firmware exposes a CDC ACM port for modem control and a
CDC Ethernet port for network data.  The descriptors look fine but
both ports actually are some sort of multiplexers requiring non-
standard headers added/removed from every packet or they get
ignored.  All information is based on a usb traffic log from a
Windows machine.

On the Verizon 4G network I've seen speeds up to 1.1MB/s so far with
this driver, a speed-o-meter site reports 16.2Mbps/10.5Mbps.
Userspace scripts are required to talk to the CDC ACM port.

Signed-off-by: Andrzej Zaborowski <balrogg@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

diff --git a/drivers/net/usb/Kconfig b/drivers/net/usb/Kconfig
index 6f600cc..3ec22c3 100644
--- a/drivers/net/usb/Kconfig
+++ b/drivers/net/usb/Kconfig
@@ -433,4 +433,19 @@ config USB_SIERRA_NET
 	  To compile this driver as a module, choose M here: the
 	  module will be called sierra_net.
 
+config USB_VL600
+	tristate "LG VL600 modem dongle"
+	depends on USB_NET_CDCETHER
+	select USB_ACM
+	help
+	  Select this if you want to use an LG Electronics 4G/LTE usb modem
+	  called VL600.  This driver only handles the ethernet
+	  interface exposed by the modem firmware.  To establish a connection
+	  you will first need a userspace program that sends the right
+	  command to the modem through its CDC ACM port, and most
+	  likely also a DHCP client.  See this thread about using the
+	  4G modem from Verizon:
+
+	  http://ubuntuforums.org/showpost.php?p=10589647&postcount=17
+
 endmenu
diff --git a/drivers/net/usb/Makefile b/drivers/net/usb/Makefile
index cac1703..c7ec8a5 100644
--- a/drivers/net/usb/Makefile
+++ b/drivers/net/usb/Makefile
@@ -27,4 +27,5 @@ obj-$(CONFIG_USB_IPHETH)	+= ipheth.o
 obj-$(CONFIG_USB_SIERRA_NET)	+= sierra_net.o
 obj-$(CONFIG_USB_NET_CX82310_ETH)	+= cx82310_eth.o
 obj-$(CONFIG_USB_NET_CDC_NCM)	+= cdc_ncm.o
+obj-$(CONFIG_USB_VL600)		+= lg-vl600.o
 
diff --git a/drivers/net/usb/cdc_ether.c b/drivers/net/usb/cdc_ether.c
index 9a60e41..51c259b 100644
--- a/drivers/net/usb/cdc_ether.c
+++ b/drivers/net/usb/cdc_ether.c
@@ -378,7 +378,7 @@ static void dumpspeed(struct usbnet *dev, __le32 *speeds)
 		   __le32_to_cpu(speeds[1]) / 1000);
 }
 
-static void cdc_status(struct usbnet *dev, struct urb *urb)
+void usbnet_cdc_status(struct usbnet *dev, struct urb *urb)
 {
 	struct usb_cdc_notification	*event;
 
@@ -418,8 +418,9 @@ static void cdc_status(struct usbnet *dev, struct urb *urb)
 		break;
 	}
 }
+EXPORT_SYMBOL_GPL(usbnet_cdc_status);
 
-static int cdc_bind(struct usbnet *dev, struct usb_interface *intf)
+int usbnet_cdc_bind(struct usbnet *dev, struct usb_interface *intf)
 {
 	int				status;
 	struct cdc_state		*info = (void *) &dev->data;
@@ -441,6 +442,7 @@ static int cdc_bind(struct usbnet *dev, struct usb_interface *intf)
 	 */
 	return 0;
 }
+EXPORT_SYMBOL_GPL(usbnet_cdc_bind);
 
 static int cdc_manage_power(struct usbnet *dev, int on)
 {
@@ -452,18 +454,18 @@ static const struct driver_info	cdc_info = {
 	.description =	"CDC Ethernet Device",
 	.flags =	FLAG_ETHER,
 	// .check_connect = cdc_check_connect,
-	.bind =		cdc_bind,
+	.bind =		usbnet_cdc_bind,
 	.unbind =	usbnet_cdc_unbind,
-	.status =	cdc_status,
+	.status =	usbnet_cdc_status,
 	.manage_power =	cdc_manage_power,
 };
 
 static const struct driver_info mbm_info = {
 	.description =	"Mobile Broadband Network Device",
 	.flags =	FLAG_WWAN,
-	.bind = 	cdc_bind,
+	.bind =		usbnet_cdc_bind,
 	.unbind =	usbnet_cdc_unbind,
-	.status =	cdc_status,
+	.status =	usbnet_cdc_status,
 	.manage_power =	cdc_manage_power,
 };
 
@@ -560,6 +562,13 @@ static const struct usb_device_id	products [] = {
 	.driver_info		= 0,
 },
 
+/* LG Electronics VL600 wants additional headers on every frame */
+{
+	USB_DEVICE_AND_INTERFACE_INFO(0x1004, 0x61aa, USB_CLASS_COMM,
+			USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
+	.driver_info		= 0,
+},
+
 /*
  * WHITELIST!!!
  *
diff --git a/drivers/net/usb/lg-vl600.c b/drivers/net/usb/lg-vl600.c
new file mode 100644
index 0000000..1d83ccf
--- /dev/null
+++ b/drivers/net/usb/lg-vl600.c
@@ -0,0 +1,346 @@
+/*
+ * Ethernet interface part of the LG VL600 LTE modem (4G dongle)
+ *
+ * Copyright (C) 2011 Intel Corporation
+ * Author: Andrzej Zaborowski <balrogg@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#include <linux/etherdevice.h>
+#include <linux/ethtool.h>
+#include <linux/mii.h>
+#include <linux/usb.h>
+#include <linux/usb/cdc.h>
+#include <linux/usb/usbnet.h>
+#include <linux/if_ether.h>
+#include <linux/if_arp.h>
+#include <linux/inetdevice.h>
+
+/*
+ * The device has a CDC ACM port for modem control (it claims to be
+ * CDC ACM anyway) and a CDC Ethernet port for actual network data.
+ * It will however ignore data on both ports that is not encapsulated
+ * in a specific way, any data returned is also encapsulated the same
+ * way.  The headers don't seem to follow any popular standard.
+ *
+ * This driver adds and strips these headers from the ethernet frames
+ * sent/received from the CDC Ethernet port.  The proprietary header
+ * replaces the standard ethernet header in a packet so only actual
+ * ethernet frames are allowed.  The headers allow some form of
+ * multiplexing by using non standard values of the .h_proto field.
+ * Windows/Mac drivers do send a couple of such frames to the device
+ * during initialisation, with protocol set to 0x0906 or 0x0b06 and (what
+ * seems to be) a flag in the .dummy_flags.  This doesn't seem necessary
+ * for modem operation but can possibly be used for GPS or other funcitons.
+ */
+
+struct vl600_frame_hdr {
+	__le32 len;
+	__le32 serial;
+	__le32 pkt_cnt;
+	__le32 dummy_flags;
+	__le32 dummy;
+	__le32 magic;
+} __attribute__((packed));
+
+struct vl600_pkt_hdr {
+	__le32 dummy[2];
+	__le32 len;
+	__be16 h_proto;
+} __attribute__((packed));
+
+struct vl600_state {
+	struct sk_buff *current_rx_buf;
+};
+
+static int vl600_bind(struct usbnet *dev, struct usb_interface *intf)
+{
+	int ret;
+	struct vl600_state *s = kzalloc(sizeof(struct vl600_state), GFP_KERNEL);
+
+	if (!s)
+		return -ENOMEM;
+
+	ret = usbnet_cdc_bind(dev, intf);
+	if (ret) {
+		kfree(s);
+		return ret;
+	}
+
+	dev->driver_priv = s;
+
+	/* ARP packets don't go through, but they're also of no use.  The
+	 * subnet has only two hosts anyway: us and the gateway / DHCP
+	 * server (probably simulated by modem firmware or network operator)
+	 * whose address changes everytime we connect to the intarwebz and
+	 * who doesn't bother answering ARP requests either.  So hardware
+	 * addresses have no meaning, the destination and the source of every
+	 * packet depend only on whether it is on the IN or OUT endpoint.  */
+	dev->net->flags |= IFF_NOARP;
+
+	return ret;
+}
+
+static void vl600_unbind(struct usbnet *dev, struct usb_interface *intf)
+{
+	struct vl600_state *s = dev->driver_priv;
+
+	if (s->current_rx_buf)
+		dev_kfree_skb(s->current_rx_buf);
+
+	kfree(s);
+
+	return usbnet_cdc_unbind(dev, intf);
+}
+
+static int vl600_rx_fixup(struct usbnet *dev, struct sk_buff *skb)
+{
+	struct vl600_frame_hdr *frame;
+	struct vl600_pkt_hdr *packet;
+	struct ethhdr *ethhdr;
+	int packet_len, count;
+	struct sk_buff *buf = skb;
+	struct sk_buff *clone;
+	struct vl600_state *s = dev->driver_priv;
+
+	/* Frame lengths are generally 4B multiplies but every couple of
+	 * hours there's an odd number of bytes sized yet correct frame,
+	 * so don't require this.  */
+
+	/* Allow a packet (or multiple packets batched together) to be
+	 * split across many frames.  We don't allow a new batch to
+	 * begin in the same frame another one is ending however, and no
+	 * leading or trailing pad bytes.  */
+	if (s->current_rx_buf) {
+		frame = (struct vl600_frame_hdr *) s->current_rx_buf->data;
+		if (skb->len + s->current_rx_buf->len >
+				le32_to_cpup(&frame->len)) {
+			netif_err(dev, ifup, dev->net, "Fragment too long\n");
+			dev->net->stats.rx_length_errors++;
+			goto error;
+		}
+
+		buf = s->current_rx_buf;
+		memcpy(skb_put(buf, skb->len), skb->data, skb->len);
+	} else if (skb->len < 4) {
+		netif_err(dev, ifup, dev->net, "Frame too short\n");
+		dev->net->stats.rx_length_errors++;
+		goto error;
+	}
+
+	frame = (struct vl600_frame_hdr *) buf->data;
+	/* NOTE: Should check that frame->magic == 0x53544448?
+	 * Otherwise if we receive garbage at the beginning of the frame
+	 * we may end up allocating a huge buffer and saving all the
+	 * future incoming data into it.  */
+
+	if (buf->len < sizeof(*frame) ||
+			buf->len != le32_to_cpup(&frame->len)) {
+		/* Save this fragment for later assembly */
+		if (s->current_rx_buf)
+			return 0;
+
+		s->current_rx_buf = skb_copy_expand(skb, 0,
+				le32_to_cpup(&frame->len), GFP_ATOMIC);
+		if (!s->current_rx_buf) {
+			netif_err(dev, ifup, dev->net, "Reserving %i bytes "
+					"for packet assembly failed.\n",
+					le32_to_cpup(&frame->len));
+			dev->net->stats.rx_errors++;
+		}
+
+		return 0;
+	}
+
+	count = le32_to_cpup(&frame->pkt_cnt);
+
+	skb_pull(buf, sizeof(*frame));
+
+	while (count--) {
+		if (buf->len < sizeof(*packet)) {
+			netif_err(dev, ifup, dev->net, "Packet too short\n");
+			goto error;
+		}
+
+		packet = (struct vl600_pkt_hdr *) buf->data;
+		packet_len = sizeof(*packet) + le32_to_cpup(&packet->len);
+		if (packet_len > buf->len) {
+			netif_err(dev, ifup, dev->net,
+					"Bad packet length stored in header\n");
+			goto error;
+		}
+
+		/* Packet header is same size as the ethernet header
+		 * (sizeof(*packet) == sizeof(*ethhdr)), additionally
+		 * the h_proto field is in the same place so we just leave it
+		 * alone and fill in the remaining fields.
+		 */
+		ethhdr = (struct ethhdr *) skb->data;
+		if (be16_to_cpup(&ethhdr->h_proto) == ETH_P_ARP &&
+				buf->len > 0x26) {
+			/* Copy the addresses from packet contents */
+			memcpy(ethhdr->h_source,
+					&buf->data[sizeof(*ethhdr) + 0x8],
+					ETH_ALEN);
+			memcpy(ethhdr->h_dest,
+					&buf->data[sizeof(*ethhdr) + 0x12],
+					ETH_ALEN);
+		} else {
+			memset(ethhdr->h_source, 0, ETH_ALEN);
+			memcpy(ethhdr->h_dest, dev->net->dev_addr, ETH_ALEN);
+		}
+
+		if (count) {
+			/* Not the last packet in this batch */
+			clone = skb_clone(buf, GFP_ATOMIC);
+			if (!clone)
+				goto error;
+
+			skb_trim(clone, packet_len);
+			usbnet_skb_return(dev, clone);
+
+			skb_pull(buf, (packet_len + 3) & ~3);
+		} else {
+			skb_trim(buf, packet_len);
+
+			if (s->current_rx_buf) {
+				usbnet_skb_return(dev, buf);
+				s->current_rx_buf = NULL;
+				return 0;
+			}
+
+			return 1;
+		}
+	}
+
+error:
+	if (s->current_rx_buf) {
+		dev_kfree_skb_any(s->current_rx_buf);
+		s->current_rx_buf = NULL;
+	}
+	dev->net->stats.rx_errors++;
+	return 0;
+}
+
+static struct sk_buff *vl600_tx_fixup(struct usbnet *dev,
+		struct sk_buff *skb, gfp_t flags)
+{
+	struct sk_buff *ret;
+	struct vl600_frame_hdr *frame;
+	struct vl600_pkt_hdr *packet;
+	static uint32_t serial = 1;
+	int orig_len = skb->len - sizeof(struct ethhdr);
+	int full_len = (skb->len + sizeof(struct vl600_frame_hdr) + 3) & ~3;
+
+	frame = (struct vl600_frame_hdr *) skb->data;
+	if (skb->len > sizeof(*frame) && skb->len == le32_to_cpup(&frame->len))
+		return skb; /* Already encapsulated? */
+
+	if (skb->len < sizeof(struct ethhdr))
+		/* Drop, device can only deal with ethernet packets */
+		return NULL;
+
+	if (!skb_cloned(skb)) {
+		int headroom = skb_headroom(skb);
+		int tailroom = skb_tailroom(skb);
+
+		if (tailroom >= full_len - skb->len - sizeof(*frame) &&
+				headroom >= sizeof(*frame))
+			/* There's enough head and tail room */
+			goto encapsulate;
+
+		if (headroom + tailroom + skb->len >= full_len) {
+			/* There's enough total room, just readjust */
+			skb->data = memmove(skb->head + sizeof(*frame),
+					skb->data, skb->len);
+			skb_set_tail_pointer(skb, skb->len);
+			goto encapsulate;
+		}
+	}
+
+	/* Alloc a new skb with the required size */
+	ret = skb_copy_expand(skb, sizeof(struct vl600_frame_hdr), full_len -
+			skb->len - sizeof(struct vl600_frame_hdr), flags);
+	dev_kfree_skb_any(skb);
+	if (!ret)
+		return ret;
+	skb = ret;
+
+encapsulate:
+	/* Packet header is same size as ethernet packet header
+	 * (sizeof(*packet) == sizeof(struct ethhdr)), additionally the
+	 * h_proto field is in the same place so we just leave it alone and
+	 * overwrite the remaining fields.
+	 */
+	packet = (struct vl600_pkt_hdr *) skb->data;
+	memset(&packet->dummy, 0, sizeof(packet->dummy));
+	packet->len = cpu_to_le32(orig_len);
+
+	frame = (struct vl600_frame_hdr *) skb_push(skb, sizeof(*frame));
+	memset(frame, 0, sizeof(*frame));
+	frame->len = cpu_to_le32(full_len);
+	frame->serial = cpu_to_le32(serial++);
+	frame->pkt_cnt = cpu_to_le32(1);
+
+	if (skb->len < full_len) /* Pad */
+		skb_put(skb, full_len - skb->len);
+
+	return skb;
+}
+
+static const struct driver_info	vl600_info = {
+	.description	= "LG VL600 modem",
+	.flags		= FLAG_ETHER | FLAG_RX_ASSEMBLE,
+	.bind		= vl600_bind,
+	.unbind		= vl600_unbind,
+	.status		= usbnet_cdc_status,
+	.rx_fixup	= vl600_rx_fixup,
+	.tx_fixup	= vl600_tx_fixup,
+};
+
+static const struct usb_device_id products[] = {
+	{
+		USB_DEVICE_AND_INTERFACE_INFO(0x1004, 0x61aa, USB_CLASS_COMM,
+				USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
+		.driver_info	= (unsigned long) &vl600_info,
+	},
+	{},	/* End */
+};
+MODULE_DEVICE_TABLE(usb, products);
+
+static struct usb_driver lg_vl600_driver = {
+	.name		= "lg-vl600",
+	.id_table	= products,
+	.probe		= usbnet_probe,
+	.disconnect	= usbnet_disconnect,
+	.suspend	= usbnet_suspend,
+	.resume		= usbnet_resume,
+};
+
+static int __init vl600_init(void)
+{
+	return usb_register(&lg_vl600_driver);
+}
+module_init(vl600_init);
+
+static void __exit vl600_exit(void)
+{
+	usb_deregister(&lg_vl600_driver);
+}
+module_exit(vl600_exit);
+
+MODULE_AUTHOR("Anrzej Zaborowski");
+MODULE_DESCRIPTION("LG-VL600 modem's ethernet link");
+MODULE_LICENSE("GPL");
diff --git a/drivers/net/usb/usbnet.c b/drivers/net/usb/usbnet.c
index 95c41d5..cf58b76 100644
--- a/drivers/net/usb/usbnet.c
+++ b/drivers/net/usb/usbnet.c
@@ -387,8 +387,12 @@ static int rx_submit (struct usbnet *dev, struct urb *urb, gfp_t flags)
 static inline void rx_process (struct usbnet *dev, struct sk_buff *skb)
 {
 	if (dev->driver_info->rx_fixup &&
-	    !dev->driver_info->rx_fixup (dev, skb))
-		goto error;
+	    !dev->driver_info->rx_fixup (dev, skb)) {
+		/* With RX_ASSEMBLE, rx_fixup() must update counters */
+		if (!(dev->driver_info->flags & FLAG_RX_ASSEMBLE))
+			dev->net->stats.rx_errors++;
+		goto done;
+	}
 	// else network stack removes extra byte if we forced a short packet
 
 	if (skb->len) {
@@ -401,8 +405,8 @@ static inline void rx_process (struct usbnet *dev, struct sk_buff *skb)
 	}
 
 	netif_dbg(dev, rx_err, dev->net, "drop\n");
-error:
 	dev->net->stats.rx_errors++;
+done:
 	skb_queue_tail(&dev->done, skb);
 }
 
diff --git a/include/linux/usb/usbnet.h b/include/linux/usb/usbnet.h
index 44842c8..201f222 100644
--- a/include/linux/usb/usbnet.h
+++ b/include/linux/usb/usbnet.h
@@ -102,6 +102,7 @@ struct driver_info {
  * Affects statistic (counters) and short packet handling.
  */
 #define FLAG_MULTI_PACKET	0x1000
+#define FLAG_RX_ASSEMBLE	0x2000	/* rx packets may span >1 frames */
 
 	/* init device ... can sleep, or cause probe() failure */
 	int	(*bind)(struct usbnet *, struct usb_interface *);
@@ -172,7 +173,9 @@ struct cdc_state {
 };
 
 extern int usbnet_generic_cdc_bind(struct usbnet *, struct usb_interface *);
+extern int usbnet_cdc_bind(struct usbnet *, struct usb_interface *);
 extern void usbnet_cdc_unbind(struct usbnet *, struct usb_interface *);
+extern void usbnet_cdc_status(struct usbnet *, struct urb *);
 
 /* CDC and RNDIS support the same host-chosen packet filters for IN transfers */
 #define	DEFAULT_FILTER	(USB_CDC_PACKET_TYPE_BROADCAST \
-- 
cgit v0.10.2


From 79b569f0ec53a14c4d71e79d93a8676d9a0fda6d Mon Sep 17 00:00:00 2001
From: Daniel Lezcano <daniel.lezcano@free.fr>
Date: Wed, 30 Mar 2011 02:42:17 -0700
Subject: netdev: fix mtu check when TSO is enabled

In case the device where is coming from the packet has TSO enabled,
we should not check the mtu size value as this one could be bigger
than the expected value.

This is the case for the macvlan driver when the lower device has
TSO enabled. The macvlan inherit this feature and forward the packets
without fragmenting them. Then the packets go through dev_forward_skb
and are dropped. This patch fix this by checking TSO is not enabled
when we want to check the mtu size.

Signed-off-by: Daniel Lezcano <daniel.lezcano@free.fr>
Acked-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

diff --git a/net/core/dev.c b/net/core/dev.c
index 563ddc2..3da9fb0 100644
--- a/net/core/dev.c
+++ b/net/core/dev.c
@@ -1454,6 +1454,27 @@ static inline void net_timestamp_check(struct sk_buff *skb)
 		__net_timestamp(skb);
 }
 
+static inline bool is_skb_forwardable(struct net_device *dev,
+				      struct sk_buff *skb)
+{
+	unsigned int len;
+
+	if (!(dev->flags & IFF_UP))
+		return false;
+
+	len = dev->mtu + dev->hard_header_len + VLAN_HLEN;
+	if (skb->len <= len)
+		return true;
+
+	/* if TSO is enabled, we don't care about the length as the packet
+	 * could be forwarded without being segmented before
+	 */
+	if (skb_is_gso(skb))
+		return true;
+
+	return false;
+}
+
 /**
  * dev_forward_skb - loopback an skb to another netif
  *
@@ -1477,8 +1498,7 @@ int dev_forward_skb(struct net_device *dev, struct sk_buff *skb)
 	skb_orphan(skb);
 	nf_reset(skb);
 
-	if (unlikely(!(dev->flags & IFF_UP) ||
-		     (skb->len > (dev->mtu + dev->hard_header_len + VLAN_HLEN)))) {
+	if (unlikely(!is_skb_forwardable(dev, skb))) {
 		atomic_long_inc(&dev->rx_dropped);
 		kfree_skb(skb);
 		return NET_RX_DROP;
-- 
cgit v0.10.2


From ad19031b5f6ede5b2df057e3e1b4f82a2ef7f75f Mon Sep 17 00:00:00 2001
From: Jesper Juhl <jj@chaosbits.net>
Date: Sun, 27 Mar 2011 09:16:12 +0000
Subject: Atheros, atl2: Fix mem leaks in error paths of atl2_set_eeprom

We leak in some error paths of drivers/net/atlx/atl2.c:atl2_set_eeprom().
The memory allocated to 'eeprom_buff' is not freed when we return -EIO.
This patch fixes that up and also removes a pointless explicit cast.

Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

diff --git a/drivers/net/atlx/atl2.c b/drivers/net/atlx/atl2.c
index e637e9f..937ef1a 100644
--- a/drivers/net/atlx/atl2.c
+++ b/drivers/net/atlx/atl2.c
@@ -1996,13 +1996,15 @@ static int atl2_set_eeprom(struct net_device *netdev,
 	if (!eeprom_buff)
 		return -ENOMEM;
 
-	ptr = (u32 *)eeprom_buff;
+	ptr = eeprom_buff;
 
 	if (eeprom->offset & 3) {
 		/* need read/modify/write of first changed EEPROM word */
 		/* only the second byte of the word is being modified */
-		if (!atl2_read_eeprom(hw, first_dword*4, &(eeprom_buff[0])))
-			return -EIO;
+		if (!atl2_read_eeprom(hw, first_dword*4, &(eeprom_buff[0]))) {
+			ret_val = -EIO;
+			goto out;
+		}
 		ptr++;
 	}
 	if (((eeprom->offset + eeprom->len) & 3)) {
@@ -2011,18 +2013,22 @@ static int atl2_set_eeprom(struct net_device *netdev,
 		 * only the first byte of the word is being modified
 		 */
 		if (!atl2_read_eeprom(hw, last_dword * 4,
-			&(eeprom_buff[last_dword - first_dword])))
-			return -EIO;
+					&(eeprom_buff[last_dword - first_dword]))) {
+			ret_val = -EIO;
+			goto out;
+		}
 	}
 
 	/* Device's eeprom is always little-endian, word addressable */
 	memcpy(ptr, bytes, eeprom->len);
 
 	for (i = 0; i < last_dword - first_dword + 1; i++) {
-		if (!atl2_write_eeprom(hw, ((first_dword+i)*4), eeprom_buff[i]))
-			return -EIO;
+		if (!atl2_write_eeprom(hw, ((first_dword+i)*4), eeprom_buff[i])) {
+			ret_val = -EIO;
+			goto out;
+		}
 	}
-
+ out:
 	kfree(eeprom_buff);
 	return ret_val;
 }
-- 
cgit v0.10.2


From e282326600f31ab38d8814fd6deb277a48850c35 Mon Sep 17 00:00:00 2001
From: Grant Likely <grant.likely@secretlab.ca>
Date: Wed, 30 Mar 2011 00:02:29 -0600
Subject: arm: versatile : Fix typo introduced in irq namespace cleanup

Commit 6845664(arm: Cleanup the irq namespace) introduces a typo
causing a build failure for the versatile platform.

[ tglx: Sorry, my bad. Have no idea how I fatfingered that ]

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: linux-arm-kernel@lists.infradead.org
LKML-Reference: <20110330060229.27397.7628.stgit@ponder>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

diff --git a/arch/arm/mach-versatile/core.c b/arch/arm/mach-versatile/core.c
index 96e59e3..eb7ffa0 100644
--- a/arch/arm/mach-versatile/core.c
+++ b/arch/arm/mach-versatile/core.c
@@ -314,7 +314,7 @@ static struct mmci_platform_data mmc0_plat_data = {
 	.gpio_cd	= -1,
 };
 
-static struct resource chalcd_resources[] = {
+static struct resource char_lcd_resources[] = {
 	{
 		.start = VERSATILE_CHAR_LCD_BASE,
 		.end   = (VERSATILE_CHAR_LCD_BASE + SZ_4K - 1),
-- 
cgit v0.10.2


From 10544f128c338aeb7f63c002ad7eee67aa0e6acf Mon Sep 17 00:00:00 2001
From: Daniel Hellstrom <daniel@gaisler.com>
Date: Wed, 30 Mar 2011 01:12:40 +0000
Subject: sparc32, leon: APBUART driver must use archdata to get IRQ number

See Commit id 1636f8ac2b08410df4766449f7c86b912443cd99 (sparc/of:
Move of_device fields into struct pdev_archdata), this patch
is similar to 19e4875fb21a69fbf620e84769a74d189c69c58d (of/sparc:
fix build regression from of_device changes)

Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

diff --git a/drivers/tty/serial/apbuart.c b/drivers/tty/serial/apbuart.c
index 1ab999b..12d4e7c 100644
--- a/drivers/tty/serial/apbuart.c
+++ b/drivers/tty/serial/apbuart.c
@@ -555,10 +555,9 @@ static struct uart_driver grlib_apbuart_driver = {
 
 static int __devinit apbuart_probe(struct platform_device *op)
 {
-	int i = -1;
+	int i;
 	struct uart_port *port = NULL;
 
-	i = 0;
 	for (i = 0; i < grlib_apbuart_port_nr; i++) {
 		if (op->dev.of_node == grlib_apbuart_nodes[i])
 			break;
@@ -566,6 +565,7 @@ static int __devinit apbuart_probe(struct platform_device *op)
 
 	port = &grlib_apbuart_ports[i];
 	port->dev = &op->dev;
+	port->irq = op->archdata.irqs[0];
 
 	uart_add_one_port(&grlib_apbuart_driver, (struct uart_port *) port);
 
@@ -615,7 +615,7 @@ static int grlib_apbuart_configure(void)
 	freq_khz = *prop;
 
 	for_each_matching_node(np, apbuart_match) {
-		const int *irqs, *ampopts;
+		const int *ampopts;
 		const struct amba_prom_registers *regs;
 		struct uart_port *port;
 		unsigned long addr;
@@ -623,11 +623,9 @@ static int grlib_apbuart_configure(void)
 		ampopts = of_get_property(np, "ampopts", NULL);
 		if (ampopts && (*ampopts == 0))
 			continue; /* Ignore if used by another OS instance */
-
-		irqs = of_get_property(np, "interrupts", NULL);
 		regs = of_get_property(np, "reg", NULL);
 
-		if (!irqs || !regs)
+		if (!regs)
 			continue;
 
 		grlib_apbuart_nodes[line] = np;
@@ -638,7 +636,7 @@ static int grlib_apbuart_configure(void)
 
 		port->mapbase = addr;
 		port->membase = ioremap(addr, sizeof(struct grlib_apbuart_regs_map));
-		port->irq = *irqs;
+		port->irq = 0;
 		port->iotype = UPIO_MEM;
 		port->ops = &grlib_apbuart_ops;
 		port->flags = UPF_BOOT_AUTOCONF;
-- 
cgit v0.10.2


From c897dcf6311ea9c8d24e96cc7f7fe9de58a0a6a2 Mon Sep 17 00:00:00 2001
From: Daniel Hellstrom <daniel@gaisler.com>
Date: Wed, 30 Mar 2011 01:12:41 +0000
Subject: sparc32,leon: Fixed APBUART frequency detection

The UARTs may be located on different APB buses, thus have

different UART clock frequency. The system frequency is not
the same (but often) as the UART frequency, rather the APB bus
frequency that the APBUART is located at has the same
frequency, so this looks at the "freq" property instead.

Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

diff --git a/drivers/tty/serial/apbuart.c b/drivers/tty/serial/apbuart.c
index 12d4e7c..19a9436 100644
--- a/drivers/tty/serial/apbuart.c
+++ b/drivers/tty/serial/apbuart.c
@@ -598,24 +598,12 @@ static struct platform_driver grlib_apbuart_of_driver = {
 
 static int grlib_apbuart_configure(void)
 {
-	struct device_node *np, *rp;
-	const u32 *prop;
-	int freq_khz, line = 0;
-
-	/* Get bus frequency */
-	rp = of_find_node_by_path("/");
-	if (!rp)
-		return -ENODEV;
-	rp = of_get_next_child(rp, NULL);
-	if (!rp)
-		return -ENODEV;
-	prop = of_get_property(rp, "clock-frequency", NULL);
-	if (!prop)
-		return -ENODEV;
-	freq_khz = *prop;
+	struct device_node *np;
+	int line = 0;
 
 	for_each_matching_node(np, apbuart_match) {
 		const int *ampopts;
+		const u32 *freq_hz;
 		const struct amba_prom_registers *regs;
 		struct uart_port *port;
 		unsigned long addr;
@@ -624,8 +612,10 @@ static int grlib_apbuart_configure(void)
 		if (ampopts && (*ampopts == 0))
 			continue; /* Ignore if used by another OS instance */
 		regs = of_get_property(np, "reg", NULL);
+		/* Frequency of APB Bus is frequency of UART */
+		freq_hz = of_get_property(np, "freq", NULL);
 
-		if (!regs)
+		if (!regs || !freq_hz || (*freq_hz == 0))
 			continue;
 
 		grlib_apbuart_nodes[line] = np;
@@ -641,7 +631,7 @@ static int grlib_apbuart_configure(void)
 		port->ops = &grlib_apbuart_ops;
 		port->flags = UPF_BOOT_AUTOCONF;
 		port->line = line;
-		port->uartclk = freq_khz * 1000;
+		port->uartclk = *freq_hz;
 		port->fifosize = apbuart_scan_fifo_size((struct uart_port *) port, line);
 		line++;
 
-- 
cgit v0.10.2


From 78c89825649a9a5ed526c507603196f467d781a5 Mon Sep 17 00:00:00 2001
From: Thomas Gleixner <tglx@linutronix.de>
Date: Wed, 30 Mar 2011 14:13:23 +0200
Subject: genirq: Remove the now obsolete config options and select statements

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

diff --git a/arch/alpha/Kconfig b/arch/alpha/Kconfig
index bd4160c..9808998 100644
--- a/arch/alpha/Kconfig
+++ b/arch/alpha/Kconfig
@@ -12,7 +12,6 @@ config ALPHA
 	select GENERIC_IRQ_PROBE
 	select AUTO_IRQ_AFFINITY if SMP
 	select GENERIC_IRQ_SHOW
-	select GENERIC_HARDIRQS_NO_DEPRECATED
 	help
 	  The Alpha is a 64-bit general-purpose processor designed and
 	  marketed by the Digital Equipment Corporation of blessed memory,
diff --git a/arch/avr32/Kconfig b/arch/avr32/Kconfig
index 49642b5..e9d689b 100644
--- a/arch/avr32/Kconfig
+++ b/arch/avr32/Kconfig
@@ -10,7 +10,6 @@ config AVR32
 	select GENERIC_IRQ_PROBE
 	select HARDIRQS_SW_RESEND
 	select GENERIC_IRQ_SHOW
-	select GENERIC_HARDIRQS_NO_DEPRECATED
 	help
 	  AVR32 is a high-performance 32-bit RISC microprocessor core,
 	  designed for cost-sensitive embedded applications, with particular
diff --git a/arch/blackfin/Kconfig b/arch/blackfin/Kconfig
index 672c216..8addb12 100644
--- a/arch/blackfin/Kconfig
+++ b/arch/blackfin/Kconfig
@@ -34,7 +34,6 @@ config BLACKFIN
 	select GENERIC_ATOMIC64
 	select GENERIC_IRQ_PROBE
 	select IRQ_PER_CPU if SMP
-	select GENERIC_HARDIRQS_NO_DEPRECATED
 
 config GENERIC_CSUM
 	def_bool y
diff --git a/arch/cris/Kconfig b/arch/cris/Kconfig
index 617925d..a6d0306 100644
--- a/arch/cris/Kconfig
+++ b/arch/cris/Kconfig
@@ -55,7 +55,6 @@ config CRIS
 	default y
 	select HAVE_IDE
 	select HAVE_GENERIC_HARDIRQS
-	select GENERIC_HARDIRQS_NO_DEPRECATED
 	select GENERIC_IRQ_SHOW
 
 config HZ
diff --git a/arch/frv/Kconfig b/arch/frv/Kconfig
index 6db8aea..064f621 100644
--- a/arch/frv/Kconfig
+++ b/arch/frv/Kconfig
@@ -7,7 +7,6 @@ config FRV
 	select HAVE_PERF_EVENTS
 	select HAVE_GENERIC_HARDIRQS
 	select GENERIC_IRQ_SHOW
-	select GENERIC_HARDIRQS_NO_DEPRECATED
 
 config ZONE_DMA
 	bool
diff --git a/arch/h8300/Kconfig b/arch/h8300/Kconfig
index 931a1ac..e20322f 100644
--- a/arch/h8300/Kconfig
+++ b/arch/h8300/Kconfig
@@ -3,7 +3,6 @@ config H8300
 	default y
 	select HAVE_IDE
 	select HAVE_GENERIC_HARDIRQS
-	select GENERIC_HARDIRQS_NO_DEPRECATED
 	select GENERIC_IRQ_SHOW
 
 config SYMBOL_PREFIX
diff --git a/arch/m32r/Kconfig b/arch/m32r/Kconfig
index b28d090..736b808 100644
--- a/arch/m32r/Kconfig
+++ b/arch/m32r/Kconfig
@@ -8,7 +8,6 @@ config M32R
 	select HAVE_KERNEL_BZIP2
 	select HAVE_KERNEL_LZMA
 	select HAVE_GENERIC_HARDIRQS
-	select GENERIC_HARDIRQS_NO_DEPRECATED
 	select GENERIC_IRQ_PROBE
 	select GENERIC_IRQ_SHOW
 
diff --git a/arch/m68k/Kconfig b/arch/m68k/Kconfig
index 6e056d3..75531da 100644
--- a/arch/m68k/Kconfig
+++ b/arch/m68k/Kconfig
@@ -5,7 +5,6 @@ config M68K
 	select HAVE_AOUT if MMU
 	select GENERIC_ATOMIC64 if MMU
 	select HAVE_GENERIC_HARDIRQS if !MMU
-	select GENERIC_HARDIRQS_NO_DEPRECATED if !MMU
 
 config RWSEM_GENERIC_SPINLOCK
 	bool
diff --git a/arch/microblaze/Kconfig b/arch/microblaze/Kconfig
index c49c326..851b3bf 100644
--- a/arch/microblaze/Kconfig
+++ b/arch/microblaze/Kconfig
@@ -17,7 +17,6 @@ config MICROBLAZE
 	select OF_EARLY_FLATTREE
 	select HAVE_GENERIC_HARDIRQS
 	select GENERIC_IRQ_PROBE
-	select GENERIC_HARDIRQS_NO_DEPRECATED
 	select GENERIC_IRQ_SHOW
 
 config SWAP
diff --git a/arch/mn10300/Kconfig b/arch/mn10300/Kconfig
index a523c94..feaf09c 100644
--- a/arch/mn10300/Kconfig
+++ b/arch/mn10300/Kconfig
@@ -2,7 +2,6 @@ config MN10300
 	def_bool y
 	select HAVE_OPROFILE
 	select HAVE_GENERIC_HARDIRQS
-	select GENERIC_HARDIRQS_NO_DEPRECATED
 	select GENERIC_IRQ_SHOW
 	select HAVE_ARCH_TRACEHOOK
 	select HAVE_ARCH_KGDB
diff --git a/arch/parisc/Kconfig b/arch/parisc/Kconfig
index 9b1f427..69ff049 100644
--- a/arch/parisc/Kconfig
+++ b/arch/parisc/Kconfig
@@ -15,7 +15,6 @@ config PARISC
 	select HAVE_GENERIC_HARDIRQS
 	select GENERIC_IRQ_PROBE
 	select IRQ_PER_CPU
-	select GENERIC_HARDIRQS_NO_DEPRECATED
 
 	help
 	  The PA-RISC microprocessor is designed by Hewlett-Packard and used
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index d0e8a1d..b6ff882 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -138,7 +138,6 @@ config PPC
 	select HAVE_GENERIC_HARDIRQS
 	select HAVE_SPARSE_IRQ
 	select IRQ_PER_CPU
-	select GENERIC_HARDIRQS_NO_DEPRECATED
 	select GENERIC_IRQ_SHOW
 	select GENERIC_IRQ_SHOW_LEVEL
 
diff --git a/arch/score/Kconfig b/arch/score/Kconfig
index 4278bbc..e73bc78 100644
--- a/arch/score/Kconfig
+++ b/arch/score/Kconfig
@@ -3,7 +3,6 @@ menu "Machine selection"
 config SCORE
        def_bool y
        select HAVE_GENERIC_HARDIRQS
-       select GENERIC_HARDIRQS_NO_DEPRECATED
        select GENERIC_IRQ_SHOW
 
 choice
diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig
index 9af3c8d..bc439de 100644
--- a/arch/sh/Kconfig
+++ b/arch/sh/Kconfig
@@ -23,7 +23,6 @@ config SUPERH
 	select HAVE_SPARSE_IRQ
 	select RTC_LIB
 	select GENERIC_ATOMIC64
-	select GENERIC_HARDIRQS_NO_DEPRECATED
 	select GENERIC_IRQ_SHOW
 	help
 	  The SuperH is a RISC processor targeted for use in embedded systems
diff --git a/arch/sparc/Kconfig b/arch/sparc/Kconfig
index 14b2346..e560d10 100644
--- a/arch/sparc/Kconfig
+++ b/arch/sparc/Kconfig
@@ -51,7 +51,6 @@ config SPARC64
 	select HAVE_PERF_EVENTS
 	select PERF_USE_VMALLOC
 	select HAVE_GENERIC_HARDIRQS
-	select GENERIC_HARDIRQS_NO_DEPRECATED
 	select GENERIC_IRQ_SHOW
 	select IRQ_PREFLOW_FASTEOI
 
diff --git a/arch/tile/Kconfig b/arch/tile/Kconfig
index 5e34a9f..6e2cdd5 100644
--- a/arch/tile/Kconfig
+++ b/arch/tile/Kconfig
@@ -11,7 +11,6 @@ config TILE
 	select HAVE_GENERIC_HARDIRQS
 	select GENERIC_IRQ_PROBE
 	select GENERIC_PENDING_IRQ if SMP
-	select GENERIC_HARDIRQS_NO_DEPRECATED
 	select GENERIC_IRQ_SHOW
 
 # FIXME: investigate whether we need/want these options.
diff --git a/arch/um/Kconfig.common b/arch/um/Kconfig.common
index 109ddc0..a923483 100644
--- a/arch/um/Kconfig.common
+++ b/arch/um/Kconfig.common
@@ -7,7 +7,6 @@ config UML
 	bool
 	default y
 	select HAVE_GENERIC_HARDIRQS
-	select GENERIC_HARDIRQS_NO_DEPRECATED
 	select GENERIC_IRQ_SHOW
 
 config MMU
diff --git a/arch/unicore32/Kconfig b/arch/unicore32/Kconfig
index 04e0249..d3a3032 100644
--- a/arch/unicore32/Kconfig
+++ b/arch/unicore32/Kconfig
@@ -10,7 +10,6 @@ config UNICORE32
 	select HAVE_KERNEL_LZMA
 	select GENERIC_FIND_FIRST_BIT
 	select GENERIC_IRQ_PROBE
-	select GENERIC_HARDIRQS_NO_DEPRECATED
 	select GENERIC_IRQ_SHOW
 	select ARCH_WANT_FRAME_POINTERS
 	help
diff --git a/arch/xtensa/Kconfig b/arch/xtensa/Kconfig
index 1d730b5..7c275f5 100644
--- a/arch/xtensa/Kconfig
+++ b/arch/xtensa/Kconfig
@@ -9,7 +9,6 @@ config XTENSA
 	select HAVE_IDE
 	select HAVE_GENERIC_HARDIRQS
 	select GENERIC_IRQ_SHOW
-	select GENERIC_HARDIRQS_NO_DEPRECATED
 	help
 	  Xtensa processors are 32-bit RISC machines designed by Tensilica
 	  primarily for embedded systems.  These processors are both
diff --git a/kernel/irq/Kconfig b/kernel/irq/Kconfig
index a69c333..c574f9a 100644
--- a/kernel/irq/Kconfig
+++ b/kernel/irq/Kconfig
@@ -10,9 +10,6 @@ menu "IRQ subsystem"
 config GENERIC_HARDIRQS
        def_bool y
 
-config GENERIC_HARDIRQS_NO_COMPAT
-       bool
-
 # Options selectable by the architecture code
 
 # Make sparse irq Kconfig switch below available
-- 
cgit v0.10.2


From eead4d5c63ff9200a46d71345227f2b2f3eb86c0 Mon Sep 17 00:00:00 2001
From: Richard Cochran <richardcochran@gmail.com>
Date: Wed, 30 Mar 2011 15:25:04 +0200
Subject: powerpc: qe_ic: Rename get_irq_desc_data and get_irq_desc_chip

These two functions disappeared in commit

    0c6f8a8b917ad361319c8ace3e9f28e69bfdb4c1
    "genirq: Remove compat code"

but they still exist in qe_ic.h.
This patch renames the function to their new names.

Signed-off-by: Richard Cochran <richard.cochran@omicron.at>
Cc: linuxppc-dev@lists.ozlabs.org
Cc: Lennert Buytenhek <buytenh@secretlab.ca>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
LKML-Reference: <20110330132504.GA31832@riccoc20.at.omicron.at>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

diff --git a/arch/powerpc/include/asm/qe_ic.h b/arch/powerpc/include/asm/qe_ic.h
index 9e2cb20..f706164 100644
--- a/arch/powerpc/include/asm/qe_ic.h
+++ b/arch/powerpc/include/asm/qe_ic.h
@@ -81,7 +81,7 @@ int qe_ic_set_high_priority(unsigned int virq, unsigned int priority, int high);
 static inline void qe_ic_cascade_low_ipic(unsigned int irq,
 					  struct irq_desc *desc)
 {
-	struct qe_ic *qe_ic = get_irq_desc_data(desc);
+	struct qe_ic *qe_ic = irq_desc_get_handler_data(desc);
 	unsigned int cascade_irq = qe_ic_get_low_irq(qe_ic);
 
 	if (cascade_irq != NO_IRQ)
@@ -91,7 +91,7 @@ static inline void qe_ic_cascade_low_ipic(unsigned int irq,
 static inline void qe_ic_cascade_high_ipic(unsigned int irq,
 					   struct irq_desc *desc)
 {
-	struct qe_ic *qe_ic = get_irq_desc_data(desc);
+	struct qe_ic *qe_ic = irq_desc_get_handler_data(desc);
 	unsigned int cascade_irq = qe_ic_get_high_irq(qe_ic);
 
 	if (cascade_irq != NO_IRQ)
@@ -101,9 +101,9 @@ static inline void qe_ic_cascade_high_ipic(unsigned int irq,
 static inline void qe_ic_cascade_low_mpic(unsigned int irq,
 					  struct irq_desc *desc)
 {
-	struct qe_ic *qe_ic = get_irq_desc_data(desc);
+	struct qe_ic *qe_ic = irq_desc_get_handler_data(desc);
 	unsigned int cascade_irq = qe_ic_get_low_irq(qe_ic);
-	struct irq_chip *chip = get_irq_desc_chip(desc);
+	struct irq_chip *chip = irq_desc_get_chip(desc);
 
 	if (cascade_irq != NO_IRQ)
 		generic_handle_irq(cascade_irq);
@@ -114,9 +114,9 @@ static inline void qe_ic_cascade_low_mpic(unsigned int irq,
 static inline void qe_ic_cascade_high_mpic(unsigned int irq,
 					   struct irq_desc *desc)
 {
-	struct qe_ic *qe_ic = get_irq_desc_data(desc);
+	struct qe_ic *qe_ic = irq_desc_get_handler_data(desc);
 	unsigned int cascade_irq = qe_ic_get_high_irq(qe_ic);
-	struct irq_chip *chip = get_irq_desc_chip(desc);
+	struct irq_chip *chip = irq_desc_get_chip(desc);
 
 	if (cascade_irq != NO_IRQ)
 		generic_handle_irq(cascade_irq);
@@ -127,9 +127,9 @@ static inline void qe_ic_cascade_high_mpic(unsigned int irq,
 static inline void qe_ic_cascade_muxed_mpic(unsigned int irq,
 					    struct irq_desc *desc)
 {
-	struct qe_ic *qe_ic = get_irq_desc_data(desc);
+	struct qe_ic *qe_ic = irq_desc_get_handler_data(desc);
 	unsigned int cascade_irq;
-	struct irq_chip *chip = get_irq_desc_chip(desc);
+	struct irq_chip *chip = irq_desc_get_chip(desc);
 
 	cascade_irq = qe_ic_get_high_irq(qe_ic);
 	if (cascade_irq == NO_IRQ)
-- 
cgit v0.10.2


From dd8ea6af1b9f4cedefb718dbfff60203c458d7ab Mon Sep 17 00:00:00 2001
From: Thomas Gleixner <tglx@linutronix.de>
Date: Wed, 30 Mar 2011 15:33:51 +0200
Subject: avr32: Fix missing irq namespace conversion

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

diff --git a/arch/avr32/mach-at32ap/pio.c b/arch/avr32/mach-at32ap/pio.c
index 3753410..f308e1d 100644
--- a/arch/avr32/mach-at32ap/pio.c
+++ b/arch/avr32/mach-at32ap/pio.c
@@ -282,7 +282,7 @@ static struct irq_chip gpio_irqchip = {
 
 static void gpio_irq_handler(unsigned irq, struct irq_desc *desc)
 {
-	struct pio_device	*pio = get_irq_desc_chip_data(desc);
+	struct pio_device	*pio = irq_desc_get_chip_data(desc);
 	unsigned		gpio_irq;
 
 	gpio_irq = (unsigned) irq_get_handler_data(irq);
-- 
cgit v0.10.2


From 1e19e658567472c46c9b4d27acdb804de04dfdac Mon Sep 17 00:00:00 2001
From: "Philip A. Prindeville" <philipp@redfish-solutions.com>
Date: Wed, 30 Mar 2011 13:22:45 +0000
Subject: atm/solos-pci: Use VPI.VCI notation uniformly.

Use VPI.VCI notation consistently throughout the module. This is the
one remaining place where the VCI is used before the VPI in any output.

Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

diff --git a/drivers/atm/solos-pci.c b/drivers/atm/solos-pci.c
index 25ef1a4..2c4146a 100644
--- a/drivers/atm/solos-pci.c
+++ b/drivers/atm/solos-pci.c
@@ -710,8 +710,8 @@ void solos_bh(unsigned long card_arg)
 					       le16_to_cpu(header->vci));
 				if (!vcc) {
 					if (net_ratelimit())
-						dev_warn(&card->dev->dev, "Received packet for unknown VCI.VPI %d.%d on port %d\n",
-							 le16_to_cpu(header->vci), le16_to_cpu(header->vpi),
+						dev_warn(&card->dev->dev, "Received packet for unknown VPI.VCI %d.%d on port %d\n",
+							 le16_to_cpu(header->vpi), le16_to_cpu(header->vci),
 							 port);
 					continue;
 				}
-- 
cgit v0.10.2


From 18b429e74eeafe42e947b1b0f9a760c7153a0b5c Mon Sep 17 00:00:00 2001
From: "Philip A. Prindeville" <philipp@redfish-solutions.com>
Date: Wed, 30 Mar 2011 12:59:26 +0000
Subject: atm/solos-pci: Don't include frame pseudo-header on transmit hex-dump

Omit pkt_hdr preamble when dumping transmitted packet as hex-dump;
we can pull this up because the frame has already been sent, and
dumping it is the last thing we do with it before freeing it.

Also include the size, vpi, and vci in the debug as is done on
receive.

Use "port" consistently instead of "device" intermittently.

Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

diff --git a/drivers/atm/solos-pci.c b/drivers/atm/solos-pci.c
index 2c4146a..968f022 100644
--- a/drivers/atm/solos-pci.c
+++ b/drivers/atm/solos-pci.c
@@ -697,7 +697,7 @@ void solos_bh(unsigned long card_arg)
 					      size);
 			}
 			if (atmdebug) {
-				dev_info(&card->dev->dev, "Received: device %d\n", port);
+				dev_info(&card->dev->dev, "Received: port %d\n", port);
 				dev_info(&card->dev->dev, "size: %d VPI: %d VCI: %d\n",
 					 size, le16_to_cpu(header->vpi),
 					 le16_to_cpu(header->vci));
@@ -1018,8 +1018,15 @@ static uint32_t fpga_tx(struct solos_card *card)
 
 			/* Clean up and free oldskb now it's gone */
 			if (atmdebug) {
+				struct pkt_hdr *header = (void *)oldskb->data;
+				int size = le16_to_cpu(header->size);
+
+				skb_pull(oldskb, sizeof(*header));
 				dev_info(&card->dev->dev, "Transmitted: port %d\n",
 					 port);
+				dev_info(&card->dev->dev, "size: %d VPI: %d VCI: %d\n",
+					 size, le16_to_cpu(header->vpi),
+					 le16_to_cpu(header->vci));
 				print_buffer(oldskb);
 			}
 
-- 
cgit v0.10.2


From c031235b395433350f25943b7580a5e343c7b7b2 Mon Sep 17 00:00:00 2001
From: "Philip A. Prindeville" <philipp@redfish-solutions.com>
Date: Wed, 30 Mar 2011 13:17:04 +0000
Subject: atm/solos-pci: Don't flap VCs when carrier state changes

Don't flap VCs when carrier state changes; higher-level protocols
can detect loss of connectivity and act accordingly. This is more
consistent with how other network interfaces work.

We no longer use release_vccs() so we can delete it.

release_vccs() was duplicated from net/atm/common.c; make the
corresponding function exported, since other code duplicates it
and could leverage it if it were public.

Signed-off-by: Philip A. Prindeville <philipp@redfish-solutions.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

diff --git a/drivers/atm/solos-pci.c b/drivers/atm/solos-pci.c
index 968f022..cd0ff66 100644
--- a/drivers/atm/solos-pci.c
+++ b/drivers/atm/solos-pci.c
@@ -165,7 +165,6 @@ static uint32_t fpga_tx(struct solos_card *);
 static irqreturn_t solos_irq(int irq, void *dev_id);
 static struct atm_vcc* find_vcc(struct atm_dev *dev, short vpi, int vci);
 static int list_vccs(int vci);
-static void release_vccs(struct atm_dev *dev);
 static int atm_init(struct solos_card *, struct device *);
 static void atm_remove(struct solos_card *);
 static int send_command(struct solos_card *card, int dev, const char *buf, size_t size);
@@ -384,7 +383,6 @@ static int process_status(struct solos_card *card, int port, struct sk_buff *skb
 	/* Anything but 'Showtime' is down */
 	if (strcmp(state_str, "Showtime")) {
 		atm_dev_signal_change(card->atmdev[port], ATM_PHY_SIG_LOST);
-		release_vccs(card->atmdev[port]);
 		dev_info(&card->dev->dev, "Port %d: %s\n", port, state_str);
 		return 0;
 	}
@@ -830,28 +828,6 @@ static int list_vccs(int vci)
 	return num_found;
 }
 
-static void release_vccs(struct atm_dev *dev)
-{
-        int i;
-
-        write_lock_irq(&vcc_sklist_lock);
-        for (i = 0; i < VCC_HTABLE_SIZE; i++) {
-                struct hlist_head *head = &vcc_hash[i];
-                struct hlist_node *node, *tmp;
-                struct sock *s;
-                struct atm_vcc *vcc;
-
-                sk_for_each_safe(s, node, tmp, head) {
-                        vcc = atm_sk(s);
-                        if (vcc->dev == dev) {
-                                vcc_release_async(vcc, -EPIPE);
-                                sk_del_node_init(s);
-                        }
-                }
-        }
-        write_unlock_irq(&vcc_sklist_lock);
-}
-
 
 static int popen(struct atm_vcc *vcc)
 {
@@ -1269,7 +1245,7 @@ static int atm_init(struct solos_card *card, struct device *parent)
 		card->atmdev[i]->ci_range.vci_bits = 16;
 		card->atmdev[i]->dev_data = card;
 		card->atmdev[i]->phy_data = (void *)(unsigned long)i;
-		atm_dev_signal_change(card->atmdev[i], ATM_PHY_SIG_UNKNOWN);
+		atm_dev_signal_change(card->atmdev[i], ATM_PHY_SIG_FOUND);
 
 		skb = alloc_skb(sizeof(*header), GFP_ATOMIC);
 		if (!skb) {
diff --git a/include/linux/atmdev.h b/include/linux/atmdev.h
index 475f8c4..381f4ce 100644
--- a/include/linux/atmdev.h
+++ b/include/linux/atmdev.h
@@ -443,6 +443,7 @@ void atm_dev_signal_change(struct atm_dev *dev, char signal);
 
 void vcc_insert_socket(struct sock *sk);
 
+void atm_dev_release_vccs(struct atm_dev *dev);
 
 /*
  * This is approximately the algorithm used by alloc_skb.
diff --git a/net/atm/common.c b/net/atm/common.c
index 1b9c52a..22b963d 100644
--- a/net/atm/common.c
+++ b/net/atm/common.c
@@ -252,6 +252,7 @@ void atm_dev_release_vccs(struct atm_dev *dev)
 	}
 	write_unlock_irq(&vcc_sklist_lock);
 }
+EXPORT_SYMBOL(atm_dev_release_vccs);
 
 static int adjust_tp(struct atm_trafprm *tp, unsigned char aal)
 {
-- 
cgit v0.10.2


From e2666f84958adb3a034b98e99699b55705117e01 Mon Sep 17 00:00:00 2001
From: Eric Dumazet <eric.dumazet@gmail.com>
Date: Wed, 30 Mar 2011 16:57:46 -0700
Subject: fib: add rtnl locking in ip_fib_net_exit

Daniel J Blueman reported a lockdep splat in trie_firstleaf(), caused by
RTNL being not locked before a call to fib_table_flush()

Reported-by: Daniel J Blueman <daniel.blueman@gmail.com>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

diff --git a/net/ipv4/fib_frontend.c b/net/ipv4/fib_frontend.c
index f116ce8..4510883 100644
--- a/net/ipv4/fib_frontend.c
+++ b/net/ipv4/fib_frontend.c
@@ -1068,6 +1068,7 @@ static void ip_fib_net_exit(struct net *net)
 	fib4_rules_exit(net);
 #endif
 
+	rtnl_lock();
 	for (i = 0; i < FIB_TABLE_HASHSZ; i++) {
 		struct fib_table *tb;
 		struct hlist_head *head;
@@ -1080,6 +1081,7 @@ static void ip_fib_net_exit(struct net *net)
 			fib_free_table(tb);
 		}
 	}
+	rtnl_unlock();
 	kfree(net->ipv4.fib_table_hash);
 }
 
-- 
cgit v0.10.2


From 04f482faf50535229a5a5c8d629cf963899f857c Mon Sep 17 00:00:00 2001
From: Patrick McHardy <kaber@trash.net>
Date: Mon, 28 Mar 2011 08:39:36 +0000
Subject: connector: convert to synchronous netlink message processing

Commits 01a16b21 (netlink: kill eff_cap from struct netlink_skb_parms)
and c53fa1ed (netlink: kill loginuid/sessionid/sid members from struct
netlink_skb_parms) removed some members from struct netlink_skb_parms
that depend on the current context, all netlink users are now required
to do synchronous message processing.

connector however queues received messages and processes them in a work
queue, which is not valid anymore. This patch converts connector to do
synchronous message processing by invoking the registered callback handler
directly from the netlink receive function.

In order to avoid invoking the callback with connector locks held, a
reference count is added to struct cn_callback_entry, the reference
is taken when finding a matching callback entry on the device's queue_list
and released after the callback handler has been invoked.

Signed-off-by: Patrick McHardy <kaber@trash.net>
Acked-by: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

diff --git a/drivers/connector/cn_queue.c b/drivers/connector/cn_queue.c
index 55653ab..c42c9d5 100644
--- a/drivers/connector/cn_queue.c
+++ b/drivers/connector/cn_queue.c
@@ -31,24 +31,9 @@
 #include <linux/connector.h>
 #include <linux/delay.h>
 
-void cn_queue_wrapper(struct work_struct *work)
-{
-	struct cn_callback_entry *cbq =
-		container_of(work, struct cn_callback_entry, work);
-	struct cn_callback_data *d = &cbq->data;
-	struct cn_msg *msg = NLMSG_DATA(nlmsg_hdr(d->skb));
-	struct netlink_skb_parms *nsp = &NETLINK_CB(d->skb);
-
-	d->callback(msg, nsp);
-
-	kfree_skb(d->skb);
-	d->skb = NULL;
-
-	kfree(d->free);
-}
-
 static struct cn_callback_entry *
-cn_queue_alloc_callback_entry(const char *name, struct cb_id *id,
+cn_queue_alloc_callback_entry(struct cn_queue_dev *dev, const char *name,
+			      struct cb_id *id,
 			      void (*callback)(struct cn_msg *, struct netlink_skb_parms *))
 {
 	struct cn_callback_entry *cbq;
@@ -59,17 +44,23 @@ cn_queue_alloc_callback_entry(const char *name, struct cb_id *id,
 		return NULL;
 	}
 
+	atomic_set(&cbq->refcnt, 1);
+
+	atomic_inc(&dev->refcnt);
+	cbq->pdev = dev;
+
 	snprintf(cbq->id.name, sizeof(cbq->id.name), "%s", name);
 	memcpy(&cbq->id.id, id, sizeof(struct cb_id));
-	cbq->data.callback = callback;
-
-	INIT_WORK(&cbq->work, &cn_queue_wrapper);
+	cbq->callback = callback;
 	return cbq;
 }
 
-static void cn_queue_free_callback(struct cn_callback_entry *cbq)
+void cn_queue_release_callback(struct cn_callback_entry *cbq)
 {
-	flush_workqueue(cbq->pdev->cn_queue);
+	if (!atomic_dec_and_test(&cbq->refcnt))
+		return;
+
+	atomic_dec(&cbq->pdev->refcnt);
 	kfree(cbq);
 }
 
@@ -85,13 +76,10 @@ int cn_queue_add_callback(struct cn_queue_dev *dev, const char *name,
 	struct cn_callback_entry *cbq, *__cbq;
 	int found = 0;
 
-	cbq = cn_queue_alloc_callback_entry(name, id, callback);
+	cbq = cn_queue_alloc_callback_entry(dev, name, id, callback);
 	if (!cbq)
 		return -ENOMEM;
 
-	atomic_inc(&dev->refcnt);
-	cbq->pdev = dev;
-
 	spin_lock_bh(&dev->queue_lock);
 	list_for_each_entry(__cbq, &dev->queue_list, callback_entry) {
 		if (cn_cb_equal(&__cbq->id.id, id)) {
@@ -104,8 +92,7 @@ int cn_queue_add_callback(struct cn_queue_dev *dev, const char *name,
 	spin_unlock_bh(&dev->queue_lock);
 
 	if (found) {
-		cn_queue_free_callback(cbq);
-		atomic_dec(&dev->refcnt);
+		cn_queue_release_callback(cbq);
 		return -EINVAL;
 	}
 
@@ -130,10 +117,8 @@ void cn_queue_del_callback(struct cn_queue_dev *dev, struct cb_id *id)
 	}
 	spin_unlock_bh(&dev->queue_lock);
 
-	if (found) {
-		cn_queue_free_callback(cbq);
-		atomic_dec(&dev->refcnt);
-	}
+	if (found)
+		cn_queue_release_callback(cbq);
 }
 
 struct cn_queue_dev *cn_queue_alloc_dev(const char *name, struct sock *nls)
@@ -151,12 +136,6 @@ struct cn_queue_dev *cn_queue_alloc_dev(const char *name, struct sock *nls)
 
 	dev->nls = nls;
 
-	dev->cn_queue = alloc_ordered_workqueue(dev->name, 0);
-	if (!dev->cn_queue) {
-		kfree(dev);
-		return NULL;
-	}
-
 	return dev;
 }
 
@@ -164,9 +143,6 @@ void cn_queue_free_dev(struct cn_queue_dev *dev)
 {
 	struct cn_callback_entry *cbq, *n;
 
-	flush_workqueue(dev->cn_queue);
-	destroy_workqueue(dev->cn_queue);
-
 	spin_lock_bh(&dev->queue_lock);
 	list_for_each_entry_safe(cbq, n, &dev->queue_list, callback_entry)
 		list_del(&cbq->callback_entry);
diff --git a/drivers/connector/connector.c b/drivers/connector/connector.c
index f7554de..d770058 100644
--- a/drivers/connector/connector.c
+++ b/drivers/connector/connector.c
@@ -122,51 +122,28 @@ EXPORT_SYMBOL_GPL(cn_netlink_send);
  */
 static int cn_call_callback(struct sk_buff *skb)
 {
-	struct cn_callback_entry *__cbq, *__new_cbq;
+	struct cn_callback_entry *i, *cbq = NULL;
 	struct cn_dev *dev = &cdev;
 	struct cn_msg *msg = NLMSG_DATA(nlmsg_hdr(skb));
+	struct netlink_skb_parms *nsp = &NETLINK_CB(skb);
 	int err = -ENODEV;
 
 	spin_lock_bh(&dev->cbdev->queue_lock);
-	list_for_each_entry(__cbq, &dev->cbdev->queue_list, callback_entry) {
-		if (cn_cb_equal(&__cbq->id.id, &msg->id)) {
-			if (likely(!work_pending(&__cbq->work) &&
-					__cbq->data.skb == NULL)) {
-				__cbq->data.skb = skb;
-
-				if (queue_work(dev->cbdev->cn_queue,
-					       &__cbq->work))
-					err = 0;
-				else
-					err = -EINVAL;
-			} else {
-				struct cn_callback_data *d;
-
-				err = -ENOMEM;
-				__new_cbq = kzalloc(sizeof(struct cn_callback_entry), GFP_ATOMIC);
-				if (__new_cbq) {
-					d = &__new_cbq->data;
-					d->skb = skb;
-					d->callback = __cbq->data.callback;
-					d->free = __new_cbq;
-
-					INIT_WORK(&__new_cbq->work,
-							&cn_queue_wrapper);
-
-					if (queue_work(dev->cbdev->cn_queue,
-						       &__new_cbq->work))
-						err = 0;
-					else {
-						kfree(__new_cbq);
-						err = -EINVAL;
-					}
-				}
-			}
+	list_for_each_entry(i, &dev->cbdev->queue_list, callback_entry) {
+		if (cn_cb_equal(&i->id.id, &msg->id)) {
+			atomic_inc(&i->refcnt);
+			cbq = i;
 			break;
 		}
 	}
 	spin_unlock_bh(&dev->cbdev->queue_lock);
 
+	if (cbq != NULL) {
+		cbq->callback(msg, nsp);
+		kfree_skb(skb);
+		cn_queue_release_callback(cbq);
+	}
+
 	return err;
 }
 
diff --git a/include/linux/connector.h b/include/linux/connector.h
index bcafc94..7c60d09 100644
--- a/include/linux/connector.h
+++ b/include/linux/connector.h
@@ -88,8 +88,6 @@ struct cn_queue_dev {
 	atomic_t refcnt;
 	unsigned char name[CN_CBQ_NAMELEN];
 
-	struct workqueue_struct *cn_queue;
-
 	struct list_head queue_list;
 	spinlock_t queue_lock;
 
@@ -101,20 +99,13 @@ struct cn_callback_id {
 	struct cb_id id;
 };
 
-struct cn_callback_data {
-	struct sk_buff *skb;
-	void (*callback) (struct cn_msg *, struct netlink_skb_parms *);
-
-	void *free;
-};
-
 struct cn_callback_entry {
 	struct list_head callback_entry;
-	struct work_struct work;
+	atomic_t refcnt;
 	struct cn_queue_dev *pdev;
 
 	struct cn_callback_id id;
-	struct cn_callback_data data;
+	void (*callback) (struct cn_msg *, struct netlink_skb_parms *);
 
 	u32 seq, group;
 };
@@ -138,13 +129,12 @@ int cn_queue_add_callback(struct cn_queue_dev *dev, const char *name,
 			  struct cb_id *id,
 			  void (*callback)(struct cn_msg *, struct netlink_skb_parms *));
 void cn_queue_del_callback(struct cn_queue_dev *dev, struct cb_id *id);
+void cn_queue_release_callback(struct cn_callback_entry *);
 
 struct cn_queue_dev *cn_queue_alloc_dev(const char *name, struct sock *);
 void cn_queue_free_dev(struct cn_queue_dev *dev);
 
 int cn_cb_equal(struct cb_id *, struct cb_id *);
 
-void cn_queue_wrapper(struct work_struct *work);
-
 #endif				/* __KERNEL__ */
 #endif				/* __CONNECTOR_H */
-- 
cgit v0.10.2


From 3628aa0657e7bb3548a25fa3ea47510327d35efc Mon Sep 17 00:00:00 2001
From: "David S. Miller" <davem@davemloft.net>
Date: Wed, 30 Mar 2011 17:37:56 -0700
Subject: sparc64: Fix section mis-match errors.

Fix all of the problems spotted by CONFIG_DEBUG_SECTION_MISMATCH under
arch/sparc during a 64-bit defconfig build.

They fall into two categorites:

1) of_device_id is marked as __initdata, and we can never do this
   since these objects sit in the device core data structures way
   past boot.  So even if a driver will never be reloaded, we have
   to keep the device ID table around.

   Mark such cases const instead.

2) The bootmem alloc/free handling code in mdesc.c was not fully
   marked __init as it should be, thus generating a reference
   to free_bootmem_late() (which is __init) from non-__init code.

Signed-off-by: David S. Miller <davem@davemloft.net>

diff --git a/arch/sparc/kernel/auxio_64.c b/arch/sparc/kernel/auxio_64.c
index 2abace0..773091a 100644
--- a/arch/sparc/kernel/auxio_64.c
+++ b/arch/sparc/kernel/auxio_64.c
@@ -93,7 +93,7 @@ void auxio_set_lte(int on)
 }
 EXPORT_SYMBOL(auxio_set_lte);
 
-static struct of_device_id __initdata auxio_match[] = {
+static const struct of_device_id auxio_match[] = {
 	{
 		.name = "auxio",
 	},
diff --git a/arch/sparc/kernel/central.c b/arch/sparc/kernel/central.c
index 136d371..7eef3f7 100644
--- a/arch/sparc/kernel/central.c
+++ b/arch/sparc/kernel/central.c
@@ -140,7 +140,7 @@ out_free:
 	goto out;
 }
 
-static struct of_device_id __initdata clock_board_match[] = {
+static const struct of_device_id clock_board_match[] = {
 	{
 		.name = "clock-board",
 	},
@@ -245,7 +245,7 @@ out_free:
 	goto out;
 }
 
-static struct of_device_id __initdata fhc_match[] = {
+static const struct of_device_id fhc_match[] = {
 	{
 		.name = "fhc",
 	},
diff --git a/arch/sparc/kernel/ds.c b/arch/sparc/kernel/ds.c
index 4a700f4..3add4de 100644
--- a/arch/sparc/kernel/ds.c
+++ b/arch/sparc/kernel/ds.c
@@ -1218,7 +1218,7 @@ static int ds_remove(struct vio_dev *vdev)
 	return 0;
 }
 
-static struct vio_device_id __initdata ds_match[] = {
+static const struct vio_device_id ds_match[] = {
 	{
 		.type = "domain-services-port",
 	},
diff --git a/arch/sparc/kernel/mdesc.c b/arch/sparc/kernel/mdesc.c
index 6addb91..56db064 100644
--- a/arch/sparc/kernel/mdesc.c
+++ b/arch/sparc/kernel/mdesc.c
@@ -107,7 +107,7 @@ static struct mdesc_handle * __init mdesc_memblock_alloc(unsigned int mdesc_size
 	return hp;
 }
 
-static void mdesc_memblock_free(struct mdesc_handle *hp)
+static void __init mdesc_memblock_free(struct mdesc_handle *hp)
 {
 	unsigned int alloc_size;
 	unsigned long start;
diff --git a/arch/sparc/kernel/pci_fire.c b/arch/sparc/kernel/pci_fire.c
index 3d70f83..d29a32f 100644
--- a/arch/sparc/kernel/pci_fire.c
+++ b/arch/sparc/kernel/pci_fire.c
@@ -496,7 +496,7 @@ out_err:
 	return err;
 }
 
-static struct of_device_id __initdata fire_match[] = {
+static const struct of_device_id fire_match[] = {
 	{
 		.name = "pci",
 		.compatible = "pciex108e,80f0",
diff --git a/arch/sparc/kernel/pci_psycho.c b/arch/sparc/kernel/pci_psycho.c
index 56ee745..86ae08d 100644
--- a/arch/sparc/kernel/pci_psycho.c
+++ b/arch/sparc/kernel/pci_psycho.c
@@ -592,7 +592,7 @@ out_err:
 	return err;
 }
 
-static struct of_device_id __initdata psycho_match[] = {
+static const struct of_device_id psycho_match[] = {
 	{
 		.name = "pci",
 		.compatible = "pci108e,8000",
diff --git a/arch/sparc/kernel/pci_sabre.c b/arch/sparc/kernel/pci_sabre.c
index 2857073..948068a 100644
--- a/arch/sparc/kernel/pci_sabre.c
+++ b/arch/sparc/kernel/pci_sabre.c
@@ -581,7 +581,7 @@ out_err:
 	return err;
 }
 
-static struct of_device_id __initdata sabre_match[] = {
+static const struct of_device_id sabre_match[] = {
 	{
 		.name = "pci",
 		.compatible = "pci108e,a001",
diff --git a/arch/sparc/kernel/pci_schizo.c b/arch/sparc/kernel/pci_schizo.c
index 1d41af7..fecfcb2 100644
--- a/arch/sparc/kernel/pci_schizo.c
+++ b/arch/sparc/kernel/pci_schizo.c
@@ -1470,7 +1470,7 @@ static int __devinit schizo_probe(struct platform_device *op)
  * and pci108e,8001.  So list the chips in reverse chronological
  * order.
  */
-static struct of_device_id __initdata schizo_match[] = {
+static const struct of_device_id schizo_match[] = {
 	{
 		.name = "pci",
 		.compatible = "pci108e,a801",
diff --git a/arch/sparc/kernel/pci_sun4v.c b/arch/sparc/kernel/pci_sun4v.c
index 6cf5346..b01a06e 100644
--- a/arch/sparc/kernel/pci_sun4v.c
+++ b/arch/sparc/kernel/pci_sun4v.c
@@ -998,7 +998,7 @@ out_err:
 	return err;
 }
 
-static struct of_device_id __initdata pci_sun4v_match[] = {
+static const struct of_device_id pci_sun4v_match[] = {
 	{
 		.name = "pci",
 		.compatible = "SUNW,sun4v-pci",
diff --git a/arch/sparc/kernel/power.c b/arch/sparc/kernel/power.c
index cd725fe..cb4c0f5 100644
--- a/arch/sparc/kernel/power.c
+++ b/arch/sparc/kernel/power.c
@@ -52,7 +52,7 @@ static int __devinit power_probe(struct platform_device *op)
 	return 0;
 }
 
-static struct of_device_id __initdata power_match[] = {
+static const struct of_device_id power_match[] = {
 	{
 		.name = "power",
 	},
diff --git a/arch/sparc/kernel/time_64.c b/arch/sparc/kernel/time_64.c
index 95ec25f..2b8d54b 100644
--- a/arch/sparc/kernel/time_64.c
+++ b/arch/sparc/kernel/time_64.c
@@ -442,7 +442,7 @@ static int __devinit rtc_probe(struct platform_device *op)
 	return platform_device_register(&rtc_cmos_device);
 }
 
-static struct of_device_id __initdata rtc_match[] = {
+static const struct of_device_id rtc_match[] = {
 	{
 		.name = "rtc",
 		.compatible = "m5819",
@@ -487,7 +487,7 @@ static int __devinit bq4802_probe(struct platform_device *op)
 	return platform_device_register(&rtc_bq4802_device);
 }
 
-static struct of_device_id __initdata bq4802_match[] = {
+static const struct of_device_id bq4802_match[] = {
 	{
 		.name = "rtc",
 		.compatible = "bq4802",
@@ -552,7 +552,7 @@ static int __devinit mostek_probe(struct platform_device *op)
 	return platform_device_register(&m48t59_rtc);
 }
 
-static struct of_device_id __initdata mostek_match[] = {
+static const struct of_device_id mostek_match[] = {
 	{
 		.name = "eeprom",
 	},
-- 
cgit v0.10.2


From a84b50ceb7d640437d0dc28a2bef0d0de054de89 Mon Sep 17 00:00:00 2001
From: "David S. Miller" <davem@davemloft.net>
Date: Wed, 30 Mar 2011 17:51:36 -0700
Subject: sctp: Pass __GFP_NOWARN to hash table allocation attempts.

Like DCCP and other similar pieces of code, there are mechanisms
here to try allocating smaller hash tables if the allocation
fails.  So pass in __GFP_NOWARN like the others do instead of
emitting a scary message.

Reported-by: Dave Jones <davej@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

diff --git a/net/sctp/protocol.c b/net/sctp/protocol.c
index 152976e..d5bf91d 100644
--- a/net/sctp/protocol.c
+++ b/net/sctp/protocol.c
@@ -1205,7 +1205,7 @@ SCTP_STATIC __init int sctp_init(void)
 		if ((sctp_assoc_hashsize > (64 * 1024)) && order > 0)
 			continue;
 		sctp_assoc_hashtable = (struct sctp_hashbucket *)
-					__get_free_pages(GFP_ATOMIC, order);
+			__get_free_pages(GFP_ATOMIC|__GFP_NOWARN, order);
 	} while (!sctp_assoc_hashtable && --order > 0);
 	if (!sctp_assoc_hashtable) {
 		pr_err("Failed association hash alloc\n");
@@ -1238,7 +1238,7 @@ SCTP_STATIC __init int sctp_init(void)
 		if ((sctp_port_hashsize > (64 * 1024)) && order > 0)
 			continue;
 		sctp_port_hashtable = (struct sctp_bind_hashbucket *)
-					__get_free_pages(GFP_ATOMIC, order);
+			__get_free_pages(GFP_ATOMIC|__GFP_NOWARN, order);
 	} while (!sctp_port_hashtable && --order > 0);
 	if (!sctp_port_hashtable) {
 		pr_err("Failed bind hash alloc\n");
-- 
cgit v0.10.2


From 6cd7a63756a68ad5e718b42aa108e27c19425743 Mon Sep 17 00:00:00 2001
From: "David S. Miller" <davem@davemloft.net>
Date: Wed, 30 Mar 2011 21:11:35 -0700
Subject: apbuart: Depend upon sparc.

It absolutely needs to be able to get at pdev_archdata members
which are sparc specific.

Signed-off-by: David S. Miller <davem@davemloft.net>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>

diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
index e1aee37..80484af 100644
--- a/drivers/tty/serial/Kconfig
+++ b/drivers/tty/serial/Kconfig
@@ -1506,7 +1506,7 @@ config SERIAL_BCM63XX_CONSOLE
 
 config SERIAL_GRLIB_GAISLER_APBUART
 	tristate "GRLIB APBUART serial support"
-	depends on OF
+	depends on OF && SPARC
 	select SERIAL_CORE
 	---help---
 	Add support for the GRLIB APBUART serial port.
-- 
cgit v0.10.2


From 438008af63f8fb3a061c31d331e150fba6eaa103 Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Thu, 13 Nov 2008 11:51:57 +0100
Subject: sound: Add delay.h to sound/soc/codecs/sn95031.c
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

This is further fallout from delay.h removal from asm/apic.h and asm/dma.h:

  ca444564a947: x86: Stop including <linux/delay.h> in two asm header files

Which caused this build failure:

  sound/soc/codecs/sn95031.c: In function ‘sn95031_get_mic_bias’:
  sound/soc/codecs/sn95031.c:153:2: error: implicit declaration of function ‘msleep’ [-Werror=implicit-function-declaration]

Cc: Jean Delvare <khali@linux-fr.org>
Cc: James E.J. Bottomley <James.Bottomley@suse.de>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
LKML-Reference: <20110325152014.297890ec@endymion.delvare>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

diff --git a/sound/soc/codecs/sn95031.c b/sound/soc/codecs/sn95031.c
index 2a30eae..a54d2a5 100644
--- a/sound/soc/codecs/sn95031.c
+++ b/sound/soc/codecs/sn95031.c
@@ -26,7 +26,9 @@
 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
 
 #include <linux/platform_device.h>
+#include <linux/delay.h>
 #include <linux/slab.h>
+
 #include <asm/intel_scu_ipc.h>
 #include <sound/pcm.h>
 #include <sound/pcm_params.h>
-- 
cgit v0.10.2


From cb6c8520f6f6bba7b7e1a6de3360a8edfd8243b6 Mon Sep 17 00:00:00 2001
From: Borislav Petkov <bp@amd64.org>
Date: Wed, 30 Mar 2011 20:34:47 +0200
Subject: x86, amd-nb: Rename CPU PCI id define for F4

With increasing number of PCI function ids, add the PCI function
id in the define name instead of its symbolic name in the BKDG
for more clarity. This renames function 4 define.

Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
LKML-Reference: <20110330183447.GA3668@aftab>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

diff --git a/arch/x86/kernel/amd_nb.c b/arch/x86/kernel/amd_nb.c
index 6801959..4c39baa 100644
--- a/arch/x86/kernel/amd_nb.c
+++ b/arch/x86/kernel/amd_nb.c
@@ -21,7 +21,7 @@ const struct pci_device_id amd_nb_misc_ids[] = {
 EXPORT_SYMBOL(amd_nb_misc_ids);
 
 static struct pci_device_id amd_nb_link_ids[] = {
-	{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_15H_NB_LINK) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_15H_NB_F4) },
 	{}
 };
 
diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h
index 11fd381..4e2c915 100644
--- a/include/linux/pci_ids.h
+++ b/include/linux/pci_ids.h
@@ -518,7 +518,7 @@
 #define PCI_DEVICE_ID_AMD_11H_NB_MISC	0x1303
 #define PCI_DEVICE_ID_AMD_11H_NB_LINK	0x1304
 #define PCI_DEVICE_ID_AMD_15H_NB_F3	0x1603
-#define PCI_DEVICE_ID_AMD_15H_NB_LINK	0x1604
+#define PCI_DEVICE_ID_AMD_15H_NB_F4	0x1604
 #define PCI_DEVICE_ID_AMD_CNB17H_F3	0x1703
 #define PCI_DEVICE_ID_AMD_LANCE		0x2000
 #define PCI_DEVICE_ID_AMD_LANCE_HOME	0x2001
-- 
cgit v0.10.2


From a718d79cc0e0c2f0aa82ba2c54383a18f15b7738 Mon Sep 17 00:00:00 2001
From: Peter Hutterer <peter.hutterer@who-t.net>
Date: Wed, 30 Mar 2011 22:25:34 -0700
Subject: Input: uinput - allow for 0/0 min/max on absolute axes.

Some devices provide absolute axes with min/max of 0/0 (e.g. wacom's
ABS_MISC axis). Current uinput restrictions do not allow duplication of
these devices and require hacks in userspace to work around this.

If the kernel accepts physical devices with a min/max of 0/0, uinput
shouldn't disallow the same range.

Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

diff --git a/drivers/input/misc/uinput.c b/drivers/input/misc/uinput.c
index 364bdf4..7360568 100644
--- a/drivers/input/misc/uinput.c
+++ b/drivers/input/misc/uinput.c
@@ -302,10 +302,14 @@ static int uinput_validate_absbits(struct input_dev *dev)
 	int retval = 0;
 
 	for (cnt = 0; cnt < ABS_CNT; cnt++) {
+		int min, max;
 		if (!test_bit(cnt, dev->absbit))
 			continue;
 
-		if (input_abs_get_max(dev, cnt) <= input_abs_get_min(dev, cnt)) {
+		min = input_abs_get_min(dev, cnt);
+		max = input_abs_get_max(dev, cnt);
+
+		if ((min != 0 || max != 0) && max <= min) {
 			printk(KERN_DEBUG
 				"%s: invalid abs[%02x] min:%d max:%d\n",
 				UINPUT_NAME, cnt,
-- 
cgit v0.10.2


From 799a2a215ed7f9398a8d528767e64b8e39904105 Mon Sep 17 00:00:00 2001
From: Rajeev Kumar <rajeev-dlh.kumar@st.com>
Date: Wed, 30 Mar 2011 22:33:42 -0700
Subject: Input: spear-keyboard - fix inverted condition in interrupt handler

We should return IRQ_NONE from interrupt handler in case keyboard
does not report DATA_AVAIL condition.

Signed-off-by: Rajeev Kumar <rajeev-dlh.kumar@st.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

diff --git a/drivers/input/keyboard/spear-keyboard.c b/drivers/input/keyboard/spear-keyboard.c
index bee03d6..d712dff 100644
--- a/drivers/input/keyboard/spear-keyboard.c
+++ b/drivers/input/keyboard/spear-keyboard.c
@@ -69,7 +69,7 @@ static irqreturn_t spear_kbd_interrupt(int irq, void *dev_id)
 	u8 sts, val;
 
 	sts = readb(kbd->io_base + STATUS_REG);
-	if (sts & DATA_AVAIL)
+	if (!(sts & DATA_AVAIL))
 		return IRQ_NONE;
 
 	if (kbd->last_key != KEY_RESERVED) {
-- 
cgit v0.10.2


From 708748670c7c6dd5bd3b141473086e6937e72737 Mon Sep 17 00:00:00 2001
From: Jan Beulich <JBeulich@novell.com>
Date: Thu, 31 Mar 2011 00:01:58 -0700
Subject: Input: synaptics - fix crash in synaptics_module_init()

'struct dmi_system_id' arrays must always have a terminator to keep
dmi_check_system() from looking at data (and possibly crashing) it
isn't supposed to look at.

The issue went unnoticed until ef8313bb1a22e7d2125d9d758aa8a81f1de91d81,
but was introduced about a year earlier with
7705d548cbe33f18ea7713b9a07aa11047aaeca4 (which also similarly changed
lifebook.c, but the problem there got eliminated shortly afterwards).

The first hunk therefore is a stable candidate back to 2.6.33, while
the full change is needed only on 2.6.38.

Signed-off-by: Jan Beulich <jbeulich@novell.com>
Cc: stable@kernel.org
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

diff --git a/drivers/input/mouse/synaptics.c b/drivers/input/mouse/synaptics.c
index aa186cf..e06e045 100644
--- a/drivers/input/mouse/synaptics.c
+++ b/drivers/input/mouse/synaptics.c
@@ -836,8 +836,8 @@ static const struct dmi_system_id __initconst toshiba_dmi_table[] = {
 		},
 
 	},
-	{ }
 #endif
+	{ }
 };
 
 static bool broken_olpc_ec;
@@ -851,8 +851,8 @@ static const struct dmi_system_id __initconst olpc_dmi_table[] = {
 			DMI_MATCH(DMI_PRODUCT_NAME, "XO"),
 		},
 	},
-	{ }
 #endif
+	{ }
 };
 
 void __init synaptics_module_init(void)
-- 
cgit v0.10.2


From a2a94e7323dad972f23b9000cab150026c929b9f Mon Sep 17 00:00:00 2001
From: Paul Bolle <pebolle@tiscali.nl>
Date: Thu, 31 Mar 2011 00:11:48 -0700
Subject: Input: i8042 - downgrade selftest error message to dbg()

On a "really fragile" laptop I noticed a single
    i8042.c: i8042 controller selftest failed. (0x1 != 0x55)

error in the log. But there's no reason to print this message at
KERN_ERR level each time that loop fails, especially since the message
telling about the overall selftest failure is printed at KERN_INFO level
(on X86).

Add an actual error message for non-X86 systems, where a selftest
failure is (apparently) more serious. Remove a space in an another error
message.

Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

diff --git a/drivers/input/serio/i8042.c b/drivers/input/serio/i8042.c
index ac4c936..d37a48e 100644
--- a/drivers/input/serio/i8042.c
+++ b/drivers/input/serio/i8042.c
@@ -869,15 +869,15 @@ static int i8042_controller_selftest(void)
 	do {
 
 		if (i8042_command(&param, I8042_CMD_CTL_TEST)) {
-			pr_err("i8042 controller self test timeout\n");
+			pr_err("i8042 controller selftest timeout\n");
 			return -ENODEV;
 		}
 
 		if (param == I8042_RET_CTL_TEST)
 			return 0;
 
-		pr_err("i8042 controller selftest failed. (%#x != %#x)\n",
-		       param, I8042_RET_CTL_TEST);
+		dbg("i8042 controller selftest: %#x != %#x\n",
+		    param, I8042_RET_CTL_TEST);
 		msleep(50);
 	} while (i++ < 5);
 
@@ -891,6 +891,7 @@ static int i8042_controller_selftest(void)
 	pr_info("giving up on controller selftest, continuing anyway...\n");
 	return 0;
 #else
+	pr_err("i8042 controller selftest failed\n");
 	return -EIO;
 #endif
 }
-- 
cgit v0.10.2


From 47c7c97a93a5b8f719093dbf83555090b3b8228b Mon Sep 17 00:00:00 2001
From: Tkhai Kirill <tkhai@yandex.ru>
Date: Thu, 31 Mar 2011 00:52:38 -0700
Subject: sparc32: Pass task_struct to schedule_tail() in ret_from_fork

We have to pass task_struct of previous process to function
schedule_tail(). Currently in ret_from_fork previous thread_info
is passed:

switch_to: mov %g6, %g3 /* previous thread_info in g6 */

ret_from_fork: call    schedule_tail
                mov    %g3, %o0 /* previous thread_info is passed */

void schedule_tail(struct task_struct *prev);

Signed-off-by: Tkhai Kirill <tkhai@yandex.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>

diff --git a/arch/sparc/kernel/entry.S b/arch/sparc/kernel/entry.S
index 1504df8..906ee3e 100644
--- a/arch/sparc/kernel/entry.S
+++ b/arch/sparc/kernel/entry.S
@@ -1283,7 +1283,7 @@ linux_syscall_trace:
 	.globl	ret_from_fork
 ret_from_fork:
 	call	schedule_tail
-	 mov	%g3, %o0
+	 ld	[%g3 + TI_TASK], %o0
 	b	ret_sys_call
 	 ld	[%sp + STACKFRAME_SZ + PT_I0], %o0
 
-- 
cgit v0.10.2


From 9f01b25048ad12b5d71f4f7d3b62ef737639a08d Mon Sep 17 00:00:00 2001
From: Chris Wilson <chris@chris-wilson.co.uk>
Date: Thu, 24 Mar 2011 11:37:03 +0000
Subject: drm/i915: Busy-spin wait_for condition in atomic contexts

During modesetting, we need to wait for the hardware to report
readiness by polling the registers. Normally, we call msleep() between
reads, because some state changes may take a whole vblank or more
to complete. However during a panic, we are in an atomic context and
cannot sleep. Instead, busy spin polling the termination condition.

References: https://bugzilla.kernel.org/show_bug.cgi?id=31772
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>

diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
index 5daa991..f5b0d83 100644
--- a/drivers/gpu/drm/i915/intel_drv.h
+++ b/drivers/gpu/drm/i915/intel_drv.h
@@ -39,7 +39,7 @@
 			ret__ = -ETIMEDOUT;				\
 			break;						\
 		}							\
-		if (W && !in_dbg_master()) msleep(W);			\
+		if (W && !(in_atomic() || in_dbg_master())) msleep(W);	\
 	}								\
 	ret__;								\
 })
-- 
cgit v0.10.2


From 7f58aabc369014fda3a4a33604ba0a1b63b941ac Mon Sep 17 00:00:00 2001
From: Chris Wilson <chris@chris-wilson.co.uk>
Date: Wed, 30 Mar 2011 16:20:43 +0100
Subject: drm/i915: Reset GMBUS controller after NAK

Once a NAK has been asserted by the slave, we need to reset the GMBUS
controller in order to continue. This is done by asserting the Software
Clear Interrupt bit and then clearing it again to restore operations.

If we don't clear the NAK, then all future GMBUS xfers will fail,
including DDC probes and EDID retrieval.

v2: Add some comments as suggested by Keith Packard.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=35781
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Keith Packard <keithp@keithp.com>
Tested-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Tested-by: "Mengmeng Meng" <mengmeng.meng@intel.com>

diff --git a/drivers/gpu/drm/i915/intel_i2c.c b/drivers/gpu/drm/i915/intel_i2c.c
index 82d04c5..d3b903b 100644
--- a/drivers/gpu/drm/i915/intel_i2c.c
+++ b/drivers/gpu/drm/i915/intel_i2c.c
@@ -259,7 +259,7 @@ gmbus_xfer(struct i2c_adapter *adapter,
 				if (wait_for(I915_READ(GMBUS2 + reg_offset) & (GMBUS_SATOER | GMBUS_HW_RDY), 50))
 					goto timeout;
 				if (I915_READ(GMBUS2 + reg_offset) & GMBUS_SATOER)
-					return 0;
+					goto clear_err;
 
 				val = I915_READ(GMBUS3 + reg_offset);
 				do {
@@ -287,7 +287,7 @@ gmbus_xfer(struct i2c_adapter *adapter,
 				if (wait_for(I915_READ(GMBUS2 + reg_offset) & (GMBUS_SATOER | GMBUS_HW_RDY), 50))
 					goto timeout;
 				if (I915_READ(GMBUS2 + reg_offset) & GMBUS_SATOER)
-					return 0;
+					goto clear_err;
 
 				val = loop = 0;
 				do {
@@ -302,14 +302,31 @@ gmbus_xfer(struct i2c_adapter *adapter,
 		if (i + 1 < num && wait_for(I915_READ(GMBUS2 + reg_offset) & (GMBUS_SATOER | GMBUS_HW_WAIT_PHASE), 50))
 			goto timeout;
 		if (I915_READ(GMBUS2 + reg_offset) & GMBUS_SATOER)
-			return 0;
+			goto clear_err;
 	}
 
-	return num;
+	goto done;
+
+clear_err:
+	/* Toggle the Software Clear Interrupt bit. This has the effect
+	 * of resetting the GMBUS controller and so clearing the
+	 * BUS_ERROR raised by the slave's NAK.
+	 */
+	I915_WRITE(GMBUS1 + reg_offset, GMBUS_SW_CLR_INT);
+	I915_WRITE(GMBUS1 + reg_offset, 0);
+
+done:
+	/* Mark the GMBUS interface as disabled. We will re-enable it at the
+	 * start of the next xfer, till then let it sleep.
+	 */
+	I915_WRITE(GMBUS0 + reg_offset, 0);
+	return i;
 
 timeout:
 	DRM_INFO("GMBUS timed out, falling back to bit banging on pin %d [%s]\n",
 		 bus->reg0 & 0xff, bus->adapter.name);
+	I915_WRITE(GMBUS0 + reg_offset, 0);
+
 	/* Hardware may not support GMBUS over these pins? Try GPIO bitbanging instead. */
 	bus->force_bit = intel_gpio_create(dev_priv, bus->reg0 & 0xff);
 	if (!bus->force_bit)
-- 
cgit v0.10.2


From 5e8996e72899847269ca36061ea33ea24bf6cb90 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Peter=20Pan=28=E6=BD=98=E5=8D=AB=E5=B9=B3=29?=
 <panweiping3@gmail.com>
Date: Wed, 30 Mar 2011 20:46:19 +0000
Subject: bonding:typo in comment

use accumulates instead of acumulates.

Signed-off-by: Pan Weiping <panweiping3@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

diff --git a/drivers/net/bonding/bond_alb.h b/drivers/net/bonding/bond_alb.h
index 118c28a..4b3e358 100644
--- a/drivers/net/bonding/bond_alb.h
+++ b/drivers/net/bonding/bond_alb.h
@@ -74,7 +74,7 @@ struct tlb_client_info {
 				 * packets to a Client that the Hash function
 				 * gave this entry index.
 				 */
-	u32 tx_bytes;		/* Each Client acumulates the BytesTx that
+	u32 tx_bytes;		/* Each Client accumulates the BytesTx that
 				 * were tranmitted to it, and after each
 				 * CallBack the LoadHistory is devided
 				 * by the balance interval
-- 
cgit v0.10.2


From 53020092bd89b0d4ccc5368a3956f43cb43e5665 Mon Sep 17 00:00:00 2001
From: Yevgeny Petrilin <yevgenyp@mellanox.co.il>
Date: Wed, 30 Mar 2011 23:28:52 +0000
Subject: mlx4: Fixing use after free

In case of allocation failure, tried to use the promiscuous QP
entry that was previously freed.
Now freeing this entry only in case we will not put it back to the list
of promiscuous entries.

Reported-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il>
Signed-off-by: David S. Miller <davem@davemloft.net>

diff --git a/drivers/net/mlx4/mcg.c b/drivers/net/mlx4/mcg.c
index e71372a..37150b2 100644
--- a/drivers/net/mlx4/mcg.c
+++ b/drivers/net/mlx4/mcg.c
@@ -469,7 +469,6 @@ static int remove_promisc_qp(struct mlx4_dev *dev, u8 vep_num, u8 port,
 
 	/*remove from list of promisc qps */
 	list_del(&pqp->list);
-	kfree(pqp);
 
 	/* set the default entry not to include the removed one */
 	mailbox = mlx4_alloc_cmd_mailbox(dev);
@@ -528,6 +527,8 @@ out_mailbox:
 out_list:
 	if (back_to_list)
 		list_add_tail(&pqp->list, &s_steer->promisc_qps[steer]);
+	else
+		kfree(pqp);
 out_mutex:
 	mutex_unlock(&priv->mcg_table.mutex);
 	return err;
-- 
cgit v0.10.2


From c37947459172a02691ccd48cb967e8b605d38c56 Mon Sep 17 00:00:00 2001
From: Yevgeny Petrilin <yevgenyp@mellanox.co.il>
Date: Wed, 30 Mar 2011 23:30:17 +0000
Subject: mlx4: Fixing bad size of event queue buffer

We should reduce the number of reserved completion queues from the total
number of entries. Since the queue size is power of two, not reducing the
reserved entries, caused a double queue size, which may lead to allocation
failures in some cases.

Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il>
Signed-off-by: David S. Miller <davem@davemloft.net>

diff --git a/drivers/net/mlx4/eq.c b/drivers/net/mlx4/eq.c
index 506cfd0..1ad1f60 100644
--- a/drivers/net/mlx4/eq.c
+++ b/drivers/net/mlx4/eq.c
@@ -603,7 +603,9 @@ int mlx4_init_eq_table(struct mlx4_dev *dev)
 	}
 
 	for (i = 0; i < dev->caps.num_comp_vectors; ++i) {
-		err = mlx4_create_eq(dev, dev->caps.num_cqs + MLX4_NUM_SPARE_EQE,
+		err = mlx4_create_eq(dev, dev->caps.num_cqs -
+					  dev->caps.reserved_cqs +
+					  MLX4_NUM_SPARE_EQE,
 				     (dev->flags & MLX4_FLAG_MSI_X) ? i : 0,
 				     &priv->eq_table.eq[i]);
 		if (err) {
-- 
cgit v0.10.2


From a51e91981870d013fcfcc08b0117997edbcbc7a7 Mon Sep 17 00:00:00 2001
From: Dario Faggioli <raistlin@linux.it>
Date: Thu, 24 Mar 2011 14:00:18 +0100
Subject: sched: Leave sched_setscheduler() earlier if possible, do not disturb
 SCHED_FIFO tasks

sched_setscheduler() (in sched.c) is called in order of changing the
scheduling policy and/or the real-time priority of a task. Thus,
if we find out that neither of those are actually being modified, it
is possible to return earlier and save the overhead of a full
deactivate+activate cycle of the task in question.

Beside that, if we have more than one SCHED_FIFO task with the same
priority on the same rq (which means they share the same priority queue)
having one of them changing its position in the priority queue because of
a sched_setscheduler (as it happens by means of the deactivate+activate)
that does not actually change the priority violates POSIX which states,
for SCHED_FIFO:

  "If a thread whose policy or priority has been modified by
   pthread_setschedprio() is a running thread or is runnable, the effect on
   its position in the thread list depends on the direction of the
   modification, as follows: a. <...> b. If the priority is unchanged, the
   thread does not change position in the thread list. c. <...>"

     http://pubs.opengroup.org/onlinepubs/009695399/functions/xsh_chap02_08.html

 (ed: And the POSIX specification here does, briefly and somewhat unexpectedly,
      match what common sense tells us as well. )

Signed-off-by: Dario Faggioli <raistlin@linux.it>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1300971618.3960.82.camel@Palantir>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

diff --git a/kernel/sched.c b/kernel/sched.c
index f592ce6..a884551 100644
--- a/kernel/sched.c
+++ b/kernel/sched.c
@@ -5011,6 +5011,17 @@ recheck:
 		return -EINVAL;
 	}
 
+	/*
+	 * If not changing anything there's no need to proceed further:
+	 */
+	if (unlikely(policy == p->policy && (!rt_policy(policy) ||
+			param->sched_priority == p->rt_priority))) {
+
+		__task_rq_unlock(rq);
+		raw_spin_unlock_irqrestore(&p->pi_lock, flags);
+		return 0;
+	}
+
 #ifdef CONFIG_RT_GROUP_SCHED
 	if (user) {
 		/*
-- 
cgit v0.10.2


From e2495b577324938f0209b4f895c5f205c7e47854 Mon Sep 17 00:00:00 2001
From: Borislav Petkov <bp@alien8.de>
Date: Sun, 27 Mar 2011 17:57:13 +0200
Subject: sched, doc: Beef up load balancing description

Correct all function names pertaining to load balancing and explain
shortly how load balancing is performed.

Signed-off-by: Borislav Petkov <bp@alien8.de>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1301241433-3790-1-git-send-email-bp@alien8.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

diff --git a/Documentation/scheduler/sched-domains.txt b/Documentation/scheduler/sched-domains.txt
index 373ceac..b7ee379 100644
--- a/Documentation/scheduler/sched-domains.txt
+++ b/Documentation/scheduler/sched-domains.txt
@@ -1,8 +1,7 @@
-Each CPU has a "base" scheduling domain (struct sched_domain). These are
-accessed via cpu_sched_domain(i) and this_sched_domain() macros. The domain
+Each CPU has a "base" scheduling domain (struct sched_domain). The domain
 hierarchy is built from these base domains via the ->parent pointer. ->parent
-MUST be NULL terminated, and domain structures should be per-CPU as they
-are locklessly updated.
+MUST be NULL terminated, and domain structures should be per-CPU as they are
+locklessly updated.
 
 Each scheduling domain spans a number of CPUs (stored in the ->span field).
 A domain's span MUST be a superset of it child's span (this restriction could
@@ -26,11 +25,26 @@ is treated as one entity. The load of a group is defined as the sum of the
 load of each of its member CPUs, and only when the load of a group becomes
 out of balance are tasks moved between groups.
 
-In kernel/sched.c, rebalance_tick is run periodically on each CPU. This
-function takes its CPU's base sched domain and checks to see if has reached
-its rebalance interval. If so, then it will run load_balance on that domain.
-rebalance_tick then checks the parent sched_domain (if it exists), and the
-parent of the parent and so forth.
+In kernel/sched.c, trigger_load_balance() is run periodically on each CPU
+through scheduler_tick(). It raises a softirq after the next regularly scheduled
+rebalancing event for the current runqueue has arrived. The actual load
+balancing workhorse, run_rebalance_domains()->rebalance_domains(), is then run
+in softirq context (SCHED_SOFTIRQ).
+
+The latter function takes two arguments: the current CPU and whether it was idle
+at the time the scheduler_tick() happened and iterates over all sched domains
+our CPU is on, starting from its base domain and going up the ->parent chain.
+While doing that, it checks to see if the current domain has exhausted its
+rebalance interval. If so, it runs load_balance() on that domain. It then checks
+the parent sched_domain (if it exists), and the parent of the parent and so
+forth.
+
+Initially, load_balance() finds the busiest group in the current sched domain.
+If it succeeds, it looks for the busiest runqueue of all the CPUs' runqueues in
+that group. If it manages to find such a runqueue, it locks both our initial
+CPU's runqueue and the newly found busiest one and starts moving tasks from it
+to our runqueue. The exact number of tasks amounts to an imbalance previously
+computed while iterating over this sched domain's groups.
 
 *** Implementing sched domains ***
 The "base" domain will "span" the first level of the hierarchy. In the case
-- 
cgit v0.10.2


From 3436ae1298cb22d722a6520fc97f112dd767a9e1 Mon Sep 17 00:00:00 2001
From: Sisir Koppaka <sisir.koppaka@gmail.com>
Date: Sat, 26 Mar 2011 18:22:55 +0530
Subject: sched: Fix rebalance interval calculation

The interval for checking scheduling domains if they are due to be
balanced currently depends on boot state NR_CPUS, which may not
accurately reflect the number of online CPUs at the time of check.

Thus replace NR_CPUS with num_online_cpus().

 (ed: Should only affect those who set NR_CPUS really high, such as 4096
      or so :-)

Signed-off-by: Sisir Koppaka <sisir.koppaka@gmail.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <AANLkTikqHWid2Q93F5U5Qw5snJH8C5PXoa7J6=6hYO94@mail.gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

diff --git a/kernel/sched_fair.c b/kernel/sched_fair.c
index 3f7ec9e..c7ec5c8 100644
--- a/kernel/sched_fair.c
+++ b/kernel/sched_fair.c
@@ -22,6 +22,7 @@
 
 #include <linux/latencytop.h>
 #include <linux/sched.h>
+#include <linux/cpumask.h>
 
 /*
  * Targeted preemption latency for CPU-bound tasks:
@@ -3850,8 +3851,8 @@ static void rebalance_domains(int cpu, enum cpu_idle_type idle)
 		interval = msecs_to_jiffies(interval);
 		if (unlikely(!interval))
 			interval = 1;
-		if (interval > HZ*NR_CPUS/10)
-			interval = HZ*NR_CPUS/10;
+		if (interval > HZ*num_online_cpus()/10)
+			interval = HZ*num_online_cpus()/10;
 
 		need_serialize = sd->flags & SD_SERIALIZE;
 
-- 
cgit v0.10.2


From 20443384fe090c5f8aeb016e7e85659c5bbdd69f Mon Sep 17 00:00:00 2001
From: Frederic Weisbecker <fweisbec@gmail.com>
Date: Thu, 31 Mar 2011 03:33:29 +0200
Subject: perf: Rebase max unprivileged mlock threshold on top of page size

Ensure we allow 512 kiB + 1 page for user control without
assuming a 4096 bytes page size.

Reported-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: <stable@kernel.org>
LKML-Reference: <1301535209-9679-1-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

diff --git a/kernel/perf_event.c b/kernel/perf_event.c
index c75925c..2616909 100644
--- a/kernel/perf_event.c
+++ b/kernel/perf_event.c
@@ -145,8 +145,8 @@ static struct srcu_struct pmus_srcu;
  */
 int sysctl_perf_event_paranoid __read_mostly = 1;
 
-/* Minimum for 128 pages + 1 for the user control page */
-int sysctl_perf_event_mlock __read_mostly = 516; /* 'free' kb per user */
+/* Minimum for 512 kiB + 1 user control page */
+int sysctl_perf_event_mlock __read_mostly = 512 + (PAGE_SIZE / 1024); /* 'free' kiB per user */
 
 /*
  * max perf event sample rate
-- 
cgit v0.10.2


From 800cd25c12981c99e5401c3551ffffd99f1c6c85 Mon Sep 17 00:00:00 2001
From: Frederic Weisbecker <fweisbec@gmail.com>
Date: Thu, 31 Mar 2011 03:35:24 +0200
Subject: perf: mmap 512 kiB by default

The default setting of perf record is to mmap 128 pages if the user
did not override with -m.

However the page size may vary accross different architecture
settings, giving different default size between each.

Moreover the kernel side still has a default max number of mlocked
pages of 512 kiB + 1 page for unprivileged users. 128 + 1 pages
with page size > 4096 overlaps this threshold.

Thus, better adapt to this limitation and set the default number of
pages to fit those 512 kiB + 1 page.

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Stephane Eranian <eranian@google.com>
LKML-Reference: <1301535324-9735-1-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

diff --git a/tools/perf/builtin-record.c b/tools/perf/builtin-record.c
index db6adec..17d1dcb 100644
--- a/tools/perf/builtin-record.c
+++ b/tools/perf/builtin-record.c
@@ -41,7 +41,7 @@ static u64			user_interval			= ULLONG_MAX;
 static u64			default_interval		=      0;
 
 static unsigned int		page_size;
-static unsigned int		mmap_pages			=    128;
+static unsigned int		mmap_pages			= UINT_MAX;
 static unsigned int		user_freq 			= UINT_MAX;
 static int			freq				=   1000;
 static int			output;
@@ -513,6 +513,10 @@ static int __cmd_record(int argc, const char **argv)
 	if (have_tracepoints(&evsel_list->entries))
 		perf_header__set_feat(&session->header, HEADER_TRACE_INFO);
 
+	/* 512 kiB: default amount of unprivileged mlocked memory */
+	if (mmap_pages == UINT_MAX)
+		mmap_pages = (512 * 1024) / page_size;
+
 	if (forks) {
 		child_pid = fork();
 		if (child_pid < 0) {
-- 
cgit v0.10.2


From ab711fe08297de1485fff0a366e6db8828cafd6a Mon Sep 17 00:00:00 2001
From: Peter Zijlstra <a.p.zijlstra@chello.nl>
Date: Thu, 31 Mar 2011 10:29:26 +0200
Subject: perf: Fix task context scheduling

Jiri reported:

 |
 | - once an event is created by sys_perf_event_open, task context
 |   is created and it stays even if the event is closed, until the
 |   task is finished ... thats what I see in code and I assume it's
 |   correct
 |
 | - when the task opens event, perf_sched_events jump label is
 |   incremented and following callbacks are started from scheduler
 |
 |         __perf_event_task_sched_in
 |         __perf_event_task_sched_out
 |
 |   These callback *in/out set/unset cpuctx->task_ctx value to the
 |   task context.
 |
 | - close is called on event on CPU 0:
 |         - the task is scheduled on CPU 0
 |         - __perf_event_task_sched_in is called
 |         - cpuctx->task_ctx is set
 |         - perf_sched_events jump label is decremented and == 0
 |         - __perf_event_task_sched_out is not called
 |         - cpuctx->task_ctx on CPU 0 stays set
 |
 | - exit is called on CPU 1:
 |         - the task is scheduled on CPU 1
 |         - perf_event_exit_task is called
 |         - task_ctx_sched_out unsets cpuctx->task_ctx on CPU 1
 |         - put_ctx destroys the context
 |
 | - another call of perf_rotate_context on CPU 0 will use invalid
 |   task_ctx pointer, and eventualy panic.
 |

Cure this the simplest possibly way by partially reverting the
jump_label optimization for the sched_out case.

Reported-and-tested-by: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: <stable@kernel.org> # .37+
LKML-Reference: <1301520405.4859.213.camel@twins>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

diff --git a/include/linux/perf_event.h b/include/linux/perf_event.h
index 311b4dc..04d75a8 100644
--- a/include/linux/perf_event.h
+++ b/include/linux/perf_event.h
@@ -1086,7 +1086,7 @@ void perf_event_task_sched_out(struct task_struct *task, struct task_struct *nex
 {
 	perf_sw_event(PERF_COUNT_SW_CONTEXT_SWITCHES, 1, 1, NULL, 0);
 
-	COND_STMT(&perf_sched_events, __perf_event_task_sched_out(task, next));
+	__perf_event_task_sched_out(task, next);
 }
 
 extern void perf_event_mmap(struct vm_area_struct *vma);
-- 
cgit v0.10.2


From fd1edb3aa2c1d92618d8f0c6d15d44ea41fcac6a Mon Sep 17 00:00:00 2001
From: Peter Zijlstra <a.p.zijlstra@chello.nl>
Date: Mon, 28 Mar 2011 13:13:56 +0200
Subject: perf: Fix task_struct reference leak

sys_perf_event_open() had an imbalance in the number of task refs it
took causing memory leakage

Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: stable@kernel.org # .37+
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

diff --git a/kernel/perf_event.c b/kernel/perf_event.c
index 2616909..27960f1 100644
--- a/kernel/perf_event.c
+++ b/kernel/perf_event.c
@@ -6531,6 +6531,11 @@ SYSCALL_DEFINE5(perf_event_open,
 		goto err_alloc;
 	}
 
+	if (task) {
+		put_task_struct(task);
+		task = NULL;
+	}
+
 	/*
 	 * Look up the group leader (we will attach this event to it):
 	 */
-- 
cgit v0.10.2


From 818987e9a19c52240ba9b1c20f28f047eef76072 Mon Sep 17 00:00:00 2001
From: Cliff Wickman <cpw@sgi.com>
Date: Thu, 31 Mar 2011 09:32:02 -0500
Subject: x86, UV: Fix kdump reboot

After a crash dump on an SGI Altix UV system the crash kernel
fails to cause a reboot.  EFI mode is disabled in the kdump
kernel, so only the reboot_type of BOOT_ACPI works.

Signed-off-by: Cliff Wickman <cpw@sgi.com>
Cc: rja@sgi.com
LKML-Reference: <E1Q5Iuo-00013b-UK@eag09.americas.sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

diff --git a/arch/x86/kernel/apic/x2apic_uv_x.c b/arch/x86/kernel/apic/x2apic_uv_x.c
index d2cf39b..33b10a0 100644
--- a/arch/x86/kernel/apic/x2apic_uv_x.c
+++ b/arch/x86/kernel/apic/x2apic_uv_x.c
@@ -24,6 +24,7 @@
 #include <linux/pci.h>
 #include <linux/kdebug.h>
 #include <linux/delay.h>
+#include <linux/crash_dump.h>
 
 #include <asm/uv/uv_mmrs.h>
 #include <asm/uv/uv_hub.h>
@@ -35,6 +36,7 @@
 #include <asm/ipi.h>
 #include <asm/smp.h>
 #include <asm/x86_init.h>
+#include <asm/emergency-restart.h>
 
 DEFINE_PER_CPU(int, x2apic_extra_bits);
 
@@ -811,4 +813,11 @@ void __init uv_system_init(void)
 
 	/* register Legacy VGA I/O redirection handler */
 	pci_register_set_vga_state(uv_set_vga_state);
+
+	/*
+	 * For a kdump kernel the reset must be BOOT_ACPI, not BOOT_EFI, as
+	 * EFI is not enabled in the kdump kernel.
+	 */
+	if (is_kdump_kernel())
+		reboot_type = BOOT_ACPI;
 }
-- 
cgit v0.10.2


From 840126579da56edae8ecc4a0d85198f742982f10 Mon Sep 17 00:00:00 2001
From: David Henningsson <david.henningsson@canonical.com>
Date: Thu, 31 Mar 2011 09:36:19 +0200
Subject: ALSA: HDA: Add dock mic quirk for Lenovo Thinkpad X220

This quirk is needed for the docking station mic of
Lenovo Thinkpad X220 to function correctly.

BugLink: http://bugs.launchpad.net/bugs/746259
Cc: stable@kernel.org
Tested-by: James Ferguson <james.ferguson@canonical.com>
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

diff --git a/sound/pci/hda/patch_conexant.c b/sound/pci/hda/patch_conexant.c
index d08cf31..69e3386 100644
--- a/sound/pci/hda/patch_conexant.c
+++ b/sound/pci/hda/patch_conexant.c
@@ -3034,6 +3034,7 @@ static struct snd_pci_quirk cxt5066_cfg_tbl[] = {
 	SND_PCI_QUIRK(0x17aa, 0x21c5, "Thinkpad Edge 13", CXT5066_THINKPAD),
 	SND_PCI_QUIRK(0x17aa, 0x21c6, "Thinkpad Edge 13", CXT5066_ASUS),
  	SND_PCI_QUIRK(0x17aa, 0x215e, "Lenovo Thinkpad", CXT5066_THINKPAD),
+	SND_PCI_QUIRK(0x17aa, 0x21da, "Lenovo X220", CXT5066_THINKPAD),
 	SND_PCI_QUIRK(0x17aa, 0x38af, "Lenovo G560", CXT5066_ASUS),
 	SND_PCI_QUIRK_VENDOR(0x17aa, "Lenovo", CXT5066_IDEAPAD), /* Fallback for Lenovos without dock mic */
 	{}
-- 
cgit v0.10.2


From 92ce52695ccf2b6c4ef7eb02e1bee1bcbf5fde89 Mon Sep 17 00:00:00 2001
From: Randy Dunlap <randy.dunlap@oracle.com>
Date: Mon, 28 Mar 2011 12:23:05 -0300
Subject: [media] staging: altera-jtag needs delay.h

altera-jtag.c needs to include <linux/delay.h> to fix a build error:

drivers/staging/altera-stapl/altera-jtag.c:398: error: implicit declaration of function 'udelay'

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Igor M. Liplianin <liplianin@netup.ru>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

diff --git a/drivers/staging/altera-stapl/altera-jtag.c b/drivers/staging/altera-stapl/altera-jtag.c
index 6b633b1..8763088 100644
--- a/drivers/staging/altera-stapl/altera-jtag.c
+++ b/drivers/staging/altera-stapl/altera-jtag.c
@@ -23,6 +23,7 @@
  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  */
 
+#include <linux/delay.h>
 #include <linux/firmware.h>
 #include <linux/slab.h>
 #include <staging/altera.h>
-- 
cgit v0.10.2


From 6705a9cc52733cb5cbdbee72be66ab462d8fb46f Mon Sep 17 00:00:00 2001
From: Manjunatha Halli <manjunatha_halli@ti.com>
Date: Wed, 23 Mar 2011 07:44:30 -0300
Subject: [media] radio: wl128x: Update registration process with ST

As underlying ST driver registration API's have changed with
latest 2.6.38-rc8 kernel this patch will update the FM driver
accordingly.

Signed-off-by: Manjunatha Halli <manjunatha_halli@ti.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

diff --git a/drivers/media/radio/wl128x/fmdrv_common.c b/drivers/media/radio/wl128x/fmdrv_common.c
index 64454d3..ecfd9fb 100644
--- a/drivers/media/radio/wl128x/fmdrv_common.c
+++ b/drivers/media/radio/wl128x/fmdrv_common.c
@@ -1494,12 +1494,17 @@ u32 fmc_prepare(struct fmdev *fmdev)
 	}
 
 	memset(&fm_st_proto, 0, sizeof(fm_st_proto));
-	fm_st_proto.type = ST_FM;
 	fm_st_proto.recv = fm_st_receive;
 	fm_st_proto.match_packet = NULL;
 	fm_st_proto.reg_complete_cb = fm_st_reg_comp_cb;
 	fm_st_proto.write = NULL; /* TI ST driver will fill write pointer */
 	fm_st_proto.priv_data = fmdev;
+	fm_st_proto.chnl_id = 0x08;
+	fm_st_proto.max_frame_size = 0xff;
+	fm_st_proto.hdr_len = 1;
+	fm_st_proto.offset_len_in_hdr = 0;
+	fm_st_proto.len_size = 1;
+	fm_st_proto.reserve = 1;
 
 	ret = st_register(&fm_st_proto);
 	if (ret == -EINPROGRESS) {
@@ -1532,7 +1537,7 @@ u32 fmc_prepare(struct fmdev *fmdev)
 		g_st_write = fm_st_proto.write;
 	} else {
 		fmerr("Failed to get ST write func pointer\n");
-		ret = st_unregister(ST_FM);
+		ret = st_unregister(&fm_st_proto);
 		if (ret < 0)
 			fmerr("st_unregister failed %d\n", ret);
 		return -EAGAIN;
@@ -1586,6 +1591,7 @@ u32 fmc_prepare(struct fmdev *fmdev)
  */
 u32 fmc_release(struct fmdev *fmdev)
 {
+	static struct st_proto_s fm_st_proto;
 	u32 ret;
 
 	if (!test_bit(FM_CORE_READY, &fmdev->flag)) {
@@ -1604,7 +1610,11 @@ u32 fmc_release(struct fmdev *fmdev)
 	fmdev->resp_comp = NULL;
 	fmdev->rx.freq = 0;
 
-	ret = st_unregister(ST_FM);
+	memset(&fm_st_proto, 0, sizeof(fm_st_proto));
+	fm_st_proto.chnl_id = 0x08;
+
+	ret = st_unregister(&fm_st_proto);
+
 	if (ret < 0)
 		fmerr("Failed to de-register FM from ST %d\n", ret);
 	else
-- 
cgit v0.10.2


From 97ea530f6fac1f9632b0c4792a2a56411454adbe Mon Sep 17 00:00:00 2001
From: John Lindgren <john.lindgren@tds.net>
Date: Thu, 24 Mar 2011 23:28:31 +0000
Subject: drm/radeon/kms: add some sanity checks to obj info record parsingi
 (v2)

Fixes:
https://bugs.freedesktop.org/show_bug.cgi?id=35502

agd5f: also add sanity check to connector records.

v2: fix one more case.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Cc: stable@kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>

diff --git a/drivers/gpu/drm/radeon/radeon_atombios.c b/drivers/gpu/drm/radeon/radeon_atombios.c
index 02d5c41..99768d9 100644
--- a/drivers/gpu/drm/radeon/radeon_atombios.c
+++ b/drivers/gpu/drm/radeon/radeon_atombios.c
@@ -675,7 +675,8 @@ bool radeon_get_atom_connector_info_from_object_table(struct drm_device *dev)
 							ATOM_ENCODER_CAP_RECORD *cap_record;
 							u16 caps = 0;
 
-							while (record->ucRecordType > 0 &&
+							while (record->ucRecordSize > 0 &&
+							       record->ucRecordType > 0 &&
 							       record->ucRecordType <= ATOM_MAX_OBJECT_RECORD_NUMBER) {
 								switch (record->ucRecordType) {
 								case ATOM_ENCODER_CAP_RECORD_TYPE:
@@ -720,7 +721,8 @@ bool radeon_get_atom_connector_info_from_object_table(struct drm_device *dev)
 									break;
 							}
 
-							while (record->ucRecordType > 0 &&
+							while (record->ucRecordSize > 0 &&
+							       record->ucRecordType > 0 &&
 							       record->ucRecordType <= ATOM_MAX_OBJECT_RECORD_NUMBER) {
 								switch (record->ucRecordType) {
 								case ATOM_I2C_RECORD_TYPE:
@@ -782,10 +784,9 @@ bool radeon_get_atom_connector_info_from_object_table(struct drm_device *dev)
 						ATOM_HPD_INT_RECORD *hpd_record;
 						ATOM_I2C_ID_CONFIG_ACCESS *i2c_config;
 
-						while (record->ucRecordType > 0
-						       && record->
-						       ucRecordType <=
-						       ATOM_MAX_OBJECT_RECORD_NUMBER) {
+						while (record->ucRecordSize > 0 &&
+						       record->ucRecordType > 0 &&
+						       record->ucRecordType <= ATOM_MAX_OBJECT_RECORD_NUMBER) {
 							switch (record->ucRecordType) {
 							case ATOM_I2C_RECORD_TYPE:
 								i2c_record =
-- 
cgit v0.10.2


From eccaca28e29861a63ebc067bfff59c7efa427371 Mon Sep 17 00:00:00 2001
From: Ben Skeggs <bskeggs@redhat.com>
Date: Wed, 30 Mar 2011 05:03:47 +0000
Subject: drm: export drm_find_cea_extension to drivers

Nouveau needs access to this structure to build an ELD block for use
by the HDA audio codec.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

diff --git a/drivers/gpu/drm/drm_edid.c b/drivers/gpu/drm/drm_edid.c
index 9c595e3..adc9358 100644
--- a/drivers/gpu/drm/drm_edid.c
+++ b/drivers/gpu/drm/drm_edid.c
@@ -1297,7 +1297,7 @@ add_detailed_modes(struct drm_connector *connector, struct edid *edid,
 /**
  * Search EDID for CEA extension block.
  */
-static u8 *drm_find_cea_extension(struct edid *edid)
+u8 *drm_find_cea_extension(struct edid *edid)
 {
 	u8 *edid_ext = NULL;
 	int i;
@@ -1318,6 +1318,7 @@ static u8 *drm_find_cea_extension(struct edid *edid)
 
 	return edid_ext;
 }
+EXPORT_SYMBOL(drm_find_cea_extension);
 
 /**
  * drm_detect_hdmi_monitor - detect whether monitor is hdmi.
diff --git a/include/drm/drm_crtc.h b/include/drm/drm_crtc.h
index 60edf9b..aaec097 100644
--- a/include/drm/drm_crtc.h
+++ b/include/drm/drm_crtc.h
@@ -778,6 +778,7 @@ extern int drm_mode_gamma_get_ioctl(struct drm_device *dev,
 				    void *data, struct drm_file *file_priv);
 extern int drm_mode_gamma_set_ioctl(struct drm_device *dev,
 				    void *data, struct drm_file *file_priv);
+extern u8 *drm_find_cea_extension(struct edid *edid);
 extern bool drm_detect_hdmi_monitor(struct edid *edid);
 extern bool drm_detect_monitor_audio(struct edid *edid);
 extern int drm_mode_page_flip_ioctl(struct drm_device *dev,
-- 
cgit v0.10.2


From c100c8f4c3c6f2a407bdbaaad2c4f1062e6a473a Mon Sep 17 00:00:00 2001
From: "David S. Miller" <davem@davemloft.net>
Date: Thu, 31 Mar 2011 18:59:10 -0700
Subject: appletalk: Fix OOPS in atalk_release().

Commit 60d9f461a20ba59219fdcdc30cbf8e3a4ad3f625 ("appletalk: remove
the BKL") added a dereference of "sk" before checking for NULL in
atalk_release().

Guard the code block completely, rather than partially, with the
NULL check.

Reported-by: Dave Jones <davej@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

diff --git a/net/appletalk/ddp.c b/net/appletalk/ddp.c
index 206e771..956a530 100644
--- a/net/appletalk/ddp.c
+++ b/net/appletalk/ddp.c
@@ -1051,16 +1051,17 @@ static int atalk_release(struct socket *sock)
 {
 	struct sock *sk = sock->sk;
 
-	sock_hold(sk);
-	lock_sock(sk);
 	if (sk) {
+		sock_hold(sk);
+		lock_sock(sk);
+
 		sock_orphan(sk);
 		sock->sk = NULL;
 		atalk_destroy_socket(sk);
-	}
-	release_sock(sk);
-	sock_put(sk);
 
+		release_sock(sk);
+		sock_put(sk);
+	}
 	return 0;
 }
 
-- 
cgit v0.10.2


From 963e5d3b76d657f1ebcf3561446d2ba1872bbfa2 Mon Sep 17 00:00:00 2001
From: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Date: Tue, 29 Mar 2011 14:51:10 +1100
Subject: powerpc: Make decrementer interrupt robust against offlined CPUs

With some implementations, it is possible that a timer interrupt
occurs every few seconds on an offline CPU. In this case, just
re-arm the decrementer and return immediately

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

diff --git a/arch/powerpc/kernel/time.c b/arch/powerpc/kernel/time.c
index aa92696..375480c 100644
--- a/arch/powerpc/kernel/time.c
+++ b/arch/powerpc/kernel/time.c
@@ -577,14 +577,21 @@ void timer_interrupt(struct pt_regs * regs)
 	struct clock_event_device *evt = &decrementer->event;
 	u64 now;
 
+	/* Ensure a positive value is written to the decrementer, or else
+	 * some CPUs will continue to take decrementer exceptions.
+	 */
+	set_dec(DECREMENTER_MAX);
+
+	/* Some implementations of hotplug will get timer interrupts while
+	 * offline, just ignore these
+	 */
+	if (!cpu_online(smp_processor_id()))
+		return;
+
 	trace_timer_interrupt_entry(regs);
 
 	__get_cpu_var(irq_stat).timer_irqs++;
 
-	/* Ensure a positive value is written to the decrementer, or else
-	 * some CPUs will continuue to take decrementer exceptions */
-	set_dec(DECREMENTER_MAX);
-
 #if defined(CONFIG_PPC32) && defined(CONFIG_PMAC)
 	if (atomic_read(&ppc_n_lost_interrupts) != 0)
 		do_IRQ(regs);
-- 
cgit v0.10.2


From fa3f82c8bb7acbe049ea71f258b3ae0a33d9d40b Mon Sep 17 00:00:00 2001
From: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Date: Thu, 10 Feb 2011 18:45:24 +1100
Subject: powerpc/smp: soft-replugged CPUs must go back to start_secondary

Various thing are torn down when a CPU is hot-unplugged. That CPU
is expected to go back to start_secondary when re-plugged to re
initialize everything, such as clock sources, maps, ...

Some implementations just return from cpu_die() callback
in the idle loop when the CPU is "re-plugged". This is not enough.

We fix it using a little asm trampoline which resets the stack
and calls back into start_secondary as if we were all fresh from
boot. The trampoline already existed on ppc64, but we add it for
ppc32

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

diff --git a/arch/powerpc/include/asm/smp.h b/arch/powerpc/include/asm/smp.h
index 66e237b..1de0e97 100644
--- a/arch/powerpc/include/asm/smp.h
+++ b/arch/powerpc/include/asm/smp.h
@@ -36,6 +36,7 @@ extern void cpu_die(void);
 
 extern void smp_send_debugger_break(int cpu);
 extern void smp_message_recv(int);
+extern void start_secondary_resume(void);
 
 DECLARE_PER_CPU(unsigned int, cpu_pvr);
 
diff --git a/arch/powerpc/kernel/head_32.S b/arch/powerpc/kernel/head_32.S
index 98c4b29..c5c24be 100644
--- a/arch/powerpc/kernel/head_32.S
+++ b/arch/powerpc/kernel/head_32.S
@@ -890,6 +890,15 @@ __secondary_start:
 	mtspr	SPRN_SRR1,r4
 	SYNC
 	RFI
+
+_GLOBAL(start_secondary_resume)
+	/* Reset stack */
+	rlwinm	r1,r1,0,0,(31-THREAD_SHIFT)	/* current_thread_info() */
+	addi	r1,r1,THREAD_SIZE-STACK_FRAME_OVERHEAD
+	li	r3,0
+	std	r3,0(r1)		/* Zero the stack frame pointer	*/
+	bl	start_secondary
+	b	.
 #endif /* CONFIG_SMP */
 
 #ifdef CONFIG_KVM_BOOK3S_HANDLER
diff --git a/arch/powerpc/kernel/smp.c b/arch/powerpc/kernel/smp.c
index 9813605..1c9956c 100644
--- a/arch/powerpc/kernel/smp.c
+++ b/arch/powerpc/kernel/smp.c
@@ -502,7 +502,7 @@ static struct device_node *cpu_to_l2cache(int cpu)
 }
 
 /* Activate a secondary processor. */
-int __devinit start_secondary(void *unused)
+void __devinit start_secondary(void *unused)
 {
 	unsigned int cpu = smp_processor_id();
 	struct device_node *l2_cache;
@@ -558,7 +558,8 @@ int __devinit start_secondary(void *unused)
 	local_irq_enable();
 
 	cpu_idle();
-	return 0;
+
+	BUG();
 }
 
 int setup_profiling_timer(unsigned int multiplier)
@@ -660,5 +661,9 @@ void cpu_die(void)
 {
 	if (ppc_md.cpu_die)
 		ppc_md.cpu_die();
+
+	/* If we return, we re-enter start_secondary */
+	start_secondary_resume();
 }
+
 #endif
diff --git a/arch/powerpc/platforms/pseries/offline_states.h b/arch/powerpc/platforms/pseries/offline_states.h
index 75a6f48..08672d9 100644
--- a/arch/powerpc/platforms/pseries/offline_states.h
+++ b/arch/powerpc/platforms/pseries/offline_states.h
@@ -34,6 +34,4 @@ static inline void set_default_offline_state(int cpu)
 #endif
 
 extern enum cpu_state_vals get_preferred_offline_state(int cpu);
-extern int start_secondary(void);
-extern void start_secondary_resume(void);
 #endif
-- 
cgit v0.10.2


From 4fcb8833af3355065bd8bffcd338eabc6f3a38a0 Mon Sep 17 00:00:00 2001
From: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Date: Thu, 10 Feb 2011 18:46:50 +1100
Subject: powerpc/smp: Fix generic_mach_cpu_die()

This is used by some "soft" hotplug implementations. I needs to
call idle_task_exit() when the CPU is going away, and we remove
the now no-longer needed set_cpu_online() and local_irq_enable()
which are handled by the return to start_secondary

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

diff --git a/arch/powerpc/kernel/smp.c b/arch/powerpc/kernel/smp.c
index 1c9956c..3c0fab5 100644
--- a/arch/powerpc/kernel/smp.c
+++ b/arch/powerpc/kernel/smp.c
@@ -362,14 +362,13 @@ void generic_mach_cpu_die(void)
 	unsigned int cpu;
 
 	local_irq_disable();
+	idle_task_exit();
 	cpu = smp_processor_id();
 	printk(KERN_DEBUG "CPU%d offline\n", cpu);
 	__get_cpu_var(cpu_state) = CPU_DEAD;
 	smp_wmb();
 	while (__get_cpu_var(cpu_state) != CPU_UP_PREPARE)
 		cpu_relax();
-	set_cpu_online(cpu, true);
-	local_irq_enable();
 }
 #endif
 
-- 
cgit v0.10.2


From b527d07114fdab83f39040c69b4b0a4b1b232c16 Mon Sep 17 00:00:00 2001
From: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Date: Fri, 11 Feb 2011 12:46:41 +1100
Subject: powerpc/smp: Remove unused generic_cpu_enable()

Nobody uses it, besides we should always use the normal __cpu_up
path anyways

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

diff --git a/arch/powerpc/include/asm/smp.h b/arch/powerpc/include/asm/smp.h
index 1de0e97..a629b6f 100644
--- a/arch/powerpc/include/asm/smp.h
+++ b/arch/powerpc/include/asm/smp.h
@@ -43,7 +43,6 @@ DECLARE_PER_CPU(unsigned int, cpu_pvr);
 #ifdef CONFIG_HOTPLUG_CPU
 extern void fixup_irqs(const struct cpumask *map);
 int generic_cpu_disable(void);
-int generic_cpu_enable(unsigned int cpu);
 void generic_cpu_die(unsigned int cpu);
 void generic_mach_cpu_die(void);
 #endif
diff --git a/arch/powerpc/kernel/smp.c b/arch/powerpc/kernel/smp.c
index 3c0fab5..19d0c25 100644
--- a/arch/powerpc/kernel/smp.c
+++ b/arch/powerpc/kernel/smp.c
@@ -322,28 +322,6 @@ int generic_cpu_disable(void)
 	return 0;
 }
 
-int generic_cpu_enable(unsigned int cpu)
-{
-	/* Do the normal bootup if we haven't
-	 * already bootstrapped. */
-	if (system_state != SYSTEM_RUNNING)
-		return -ENOSYS;
-
-	/* get the target out of it's holding state */
-	per_cpu(cpu_state, cpu) = CPU_UP_PREPARE;
-	smp_wmb();
-
-	while (!cpu_online(cpu))
-		cpu_relax();
-
-#ifdef CONFIG_PPC64
-	fixup_irqs(cpu_online_mask);
-	/* counter the irq disable in fixup_irqs */
-	local_irq_enable();
-#endif
-	return 0;
-}
-
 void generic_cpu_die(unsigned int cpu)
 {
 	int i;
-- 
cgit v0.10.2


From 7a53a4fe707a93a33f6c5d42173bf213cb6ff71d Mon Sep 17 00:00:00 2001
From: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Date: Fri, 11 Feb 2011 12:49:01 +1100
Subject: powerpc/smp: Remove unused smp_ops->cpu_enable()

Remove the last remnants of cpu_enable(), everybody uses the normal
__cpu_up() path now

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

diff --git a/arch/powerpc/include/asm/machdep.h b/arch/powerpc/include/asm/machdep.h
index fe56a23..bcfc0da 100644
--- a/arch/powerpc/include/asm/machdep.h
+++ b/arch/powerpc/include/asm/machdep.h
@@ -37,7 +37,6 @@ struct smp_ops_t {
 	void  (*setup_cpu)(int nr);
 	void  (*take_timebase)(void);
 	void  (*give_timebase)(void);
-	int   (*cpu_enable)(unsigned int nr);
 	int   (*cpu_disable)(void);
 	void  (*cpu_die)(unsigned int nr);
 	int   (*cpu_bootable)(unsigned int nr);
diff --git a/arch/powerpc/kernel/smp.c b/arch/powerpc/kernel/smp.c
index 19d0c25..be7d728 100644
--- a/arch/powerpc/kernel/smp.c
+++ b/arch/powerpc/kernel/smp.c
@@ -350,21 +350,11 @@ void generic_mach_cpu_die(void)
 }
 #endif
 
-static int __devinit cpu_enable(unsigned int cpu)
-{
-	if (smp_ops && smp_ops->cpu_enable)
-		return smp_ops->cpu_enable(cpu);
-
-	return -ENOSYS;
-}
-
 int __cpuinit __cpu_up(unsigned int cpu)
 {
 	int c;
 
 	secondary_ti = current_set[cpu];
-	if (!cpu_enable(cpu))
-		return 0;
 
 	if (smp_ops == NULL ||
 	    (smp_ops->cpu_bootable && !smp_ops->cpu_bootable(cpu)))
diff --git a/arch/powerpc/platforms/powermac/smp.c b/arch/powerpc/platforms/powermac/smp.c
index c95215f..ebd2b7e 100644
--- a/arch/powerpc/platforms/powermac/smp.c
+++ b/arch/powerpc/platforms/powermac/smp.c
@@ -923,8 +923,6 @@ struct smp_ops_t core99_smp_ops = {
 # if defined(CONFIG_PPC64)
 	.cpu_disable	= generic_cpu_disable,
 	.cpu_die	= generic_cpu_die,
-	/* intentionally do *NOT* assign cpu_enable,
-	 * the generic code will use kick_cpu then! */
 # endif
 #endif
 };
-- 
cgit v0.10.2


From fb49f864c3c3f8ac5b68563774171fe43634ffeb Mon Sep 17 00:00:00 2001
From: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Date: Fri, 11 Feb 2011 14:09:32 +1100
Subject: powerpc/pmac/smp: Fix 32-bit PowerMac cpu_die

Use generic cpu_state, call idle_task_exit() properly, and
remove smp_core99_cpu_die() which isn't useful, the generic
function does the job just fine.

diff --git a/arch/powerpc/include/asm/smp.h b/arch/powerpc/include/asm/smp.h
index a629b6f..9fe5597 100644
--- a/arch/powerpc/include/asm/smp.h
+++ b/arch/powerpc/include/asm/smp.h
@@ -45,6 +45,7 @@ extern void fixup_irqs(const struct cpumask *map);
 int generic_cpu_disable(void);
 void generic_cpu_die(unsigned int cpu);
 void generic_mach_cpu_die(void);
+DECLARE_PER_CPU(int, cpu_state);
 #endif
 
 #ifdef CONFIG_PPC64
diff --git a/arch/powerpc/platforms/powermac/smp.c b/arch/powerpc/platforms/powermac/smp.c
index ebd2b7e..e0ac7bb 100644
--- a/arch/powerpc/platforms/powermac/smp.c
+++ b/arch/powerpc/platforms/powermac/smp.c
@@ -880,31 +880,17 @@ int smp_core99_cpu_disable(void)
 	return 0;
 }
 
-static int cpu_dead[NR_CPUS];
-
 void pmac32_cpu_die(void)
 {
 	local_irq_disable();
-	cpu_dead[smp_processor_id()] = 1;
+	idle_task_exit();
+	printk(KERN_DEBUG "CPU%d offline\n", smp_processor_id());
+	__get_cpu_var(cpu_state) = CPU_DEAD;
+	smp_wmb();
 	mb();
 	low_cpu_die();
 }
 
-void smp_core99_cpu_die(unsigned int cpu)
-{
-	int timeout;
-
-	timeout = 1000;
-	while (!cpu_dead[cpu]) {
-		if (--timeout == 0) {
-			printk("CPU %u refused to die!\n", cpu);
-			break;
-		}
-		msleep(1);
-	}
-	cpu_dead[cpu] = 0;
-}
-
 #endif /* CONFIG_HOTPLUG_CPU && CONFIG_PP32 */
 
 /* Core99 Macs (dual G4s and G5s) */
@@ -918,12 +904,11 @@ struct smp_ops_t core99_smp_ops = {
 #if defined(CONFIG_HOTPLUG_CPU)
 # if defined(CONFIG_PPC32)
 	.cpu_disable	= smp_core99_cpu_disable,
-	.cpu_die	= smp_core99_cpu_die,
 # endif
 # if defined(CONFIG_PPC64)
 	.cpu_disable	= generic_cpu_disable,
-	.cpu_die	= generic_cpu_die,
 # endif
+	.cpu_die	= generic_cpu_die,
 #endif
 };
 
-- 
cgit v0.10.2


From 1c91cc570576dfd0f288d664c095d64d11aaace4 Mon Sep 17 00:00:00 2001
From: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Date: Fri, 11 Feb 2011 13:05:17 +1100
Subject: powerpc/pmac/smp: Rename fixup_irqs() to migrate_irqs() and use it on
 ppc32

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

diff --git a/arch/powerpc/include/asm/smp.h b/arch/powerpc/include/asm/smp.h
index 9fe5597..7e99771 100644
--- a/arch/powerpc/include/asm/smp.h
+++ b/arch/powerpc/include/asm/smp.h
@@ -41,7 +41,7 @@ extern void start_secondary_resume(void);
 DECLARE_PER_CPU(unsigned int, cpu_pvr);
 
 #ifdef CONFIG_HOTPLUG_CPU
-extern void fixup_irqs(const struct cpumask *map);
+extern void migrate_irqs(void);
 int generic_cpu_disable(void);
 void generic_cpu_die(unsigned int cpu);
 void generic_mach_cpu_die(void);
diff --git a/arch/powerpc/kernel/irq.c b/arch/powerpc/kernel/irq.c
index 63625e0..f621b7d 100644
--- a/arch/powerpc/kernel/irq.c
+++ b/arch/powerpc/kernel/irq.c
@@ -246,12 +246,13 @@ u64 arch_irq_stat_cpu(unsigned int cpu)
 }
 
 #ifdef CONFIG_HOTPLUG_CPU
-void fixup_irqs(const struct cpumask *map)
+void migrate_irqs(void)
 {
 	struct irq_desc *desc;
 	unsigned int irq;
 	static int warned;
 	cpumask_var_t mask;
+	const struct cpumask *map = cpu_online_mask;
 
 	alloc_cpumask_var(&mask, GFP_KERNEL);
 
diff --git a/arch/powerpc/kernel/smp.c b/arch/powerpc/kernel/smp.c
index be7d728..f6cc5c1 100644
--- a/arch/powerpc/kernel/smp.c
+++ b/arch/powerpc/kernel/smp.c
@@ -317,8 +317,8 @@ int generic_cpu_disable(void)
 	set_cpu_online(cpu, false);
 #ifdef CONFIG_PPC64
 	vdso_data->processorCount--;
-	fixup_irqs(cpu_online_mask);
 #endif
+	migrate_irqs();
 	return 0;
 }
 
-- 
cgit v0.10.2


From 45e07fd045153c0049c99b0cf6cf7254c164d37b Mon Sep 17 00:00:00 2001
From: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Date: Mon, 21 Feb 2011 16:31:49 +1100
Subject: powerpc/pmac/smp: Fixup smp_core99_cpu_disable() and use it on 64-bit

Use the generic code, just add the MPIC priority setting,

I don't see any use in mucking around with the decrementer,
as 32-bit will have EE off all along, and 64-bit will be able
to deal with it.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

diff --git a/arch/powerpc/platforms/powermac/smp.c b/arch/powerpc/platforms/powermac/smp.c
index e0ac7bb..eda4709 100644
--- a/arch/powerpc/platforms/powermac/smp.c
+++ b/arch/powerpc/platforms/powermac/smp.c
@@ -867,16 +867,14 @@ static void __devinit smp_core99_setup_cpu(int cpu_nr)
 
 #if defined(CONFIG_HOTPLUG_CPU) && defined(CONFIG_PPC32)
 
-int smp_core99_cpu_disable(void)
+static int smp_core99_cpu_disable(void)
 {
-	set_cpu_online(smp_processor_id(), false);
+	int rc = generic_cpu_disable();
+	if (rc)
+		return rc;
 
-	/* XXX reset cpu affinity here */
 	mpic_cpu_set_priority(0xf);
-	asm volatile("mtdec %0" : : "r" (0x7fffffff));
-	mb();
-	udelay(20);
-	asm volatile("mtdec %0" : : "r" (0x7fffffff));
+
 	return 0;
 }
 
@@ -902,12 +900,7 @@ struct smp_ops_t core99_smp_ops = {
 	.give_timebase	= smp_core99_give_timebase,
 	.take_timebase	= smp_core99_take_timebase,
 #if defined(CONFIG_HOTPLUG_CPU)
-# if defined(CONFIG_PPC32)
 	.cpu_disable	= smp_core99_cpu_disable,
-# endif
-# if defined(CONFIG_PPC64)
-	.cpu_disable	= generic_cpu_disable,
-# endif
 	.cpu_die	= generic_cpu_die,
 #endif
 };
-- 
cgit v0.10.2


From 4c6130d9bba78e7ac44584378660a1204c5297d1 Mon Sep 17 00:00:00 2001
From: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Date: Fri, 11 Feb 2011 14:03:20 +1100
Subject: powerpc/pmac/smp: Consolidate 32-bit and 64-bit PowerMac cpu_die in
 one file

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

diff --git a/arch/powerpc/platforms/powermac/pmac.h b/arch/powerpc/platforms/powermac/pmac.h
index f0bc08f..20468f4 100644
--- a/arch/powerpc/platforms/powermac/pmac.h
+++ b/arch/powerpc/platforms/powermac/pmac.h
@@ -33,7 +33,6 @@ extern void pmac_setup_pci_dma(void);
 extern void pmac_check_ht_link(void);
 
 extern void pmac_setup_smp(void);
-extern void pmac32_cpu_die(void);
 extern void low_cpu_die(void) __attribute__((noreturn));
 
 extern int pmac_nvram_init(void);
diff --git a/arch/powerpc/platforms/powermac/setup.c b/arch/powerpc/platforms/powermac/setup.c
index d5aceb7..aa45281 100644
--- a/arch/powerpc/platforms/powermac/setup.c
+++ b/arch/powerpc/platforms/powermac/setup.c
@@ -650,51 +650,6 @@ static int pmac_pci_probe_mode(struct pci_bus *bus)
 		return PCI_PROBE_NORMAL;
 	return PCI_PROBE_DEVTREE;
 }
-
-#ifdef CONFIG_HOTPLUG_CPU
-/* access per cpu vars from generic smp.c */
-DECLARE_PER_CPU(int, cpu_state);
-
-static void pmac64_cpu_die(void)
-{
-	/*
-	 * turn off as much as possible, we'll be
-	 * kicked out as this will only be invoked
-	 * on core99 platforms for now ...
-	 */
-
-	printk(KERN_INFO "CPU#%d offline\n", smp_processor_id());
-	__get_cpu_var(cpu_state) = CPU_DEAD;
-	smp_wmb();
-
-	/*
-	 * during the path that leads here preemption is disabled,
-	 * reenable it now so that when coming up preempt count is
-	 * zero correctly
-	 */
-	preempt_enable();
-
-	/*
-	 * hard-disable interrupts for the non-NAP case, the NAP code
-	 * needs to re-enable interrupts (but soft-disables them)
-	 */
-	hard_irq_disable();
-
-	while (1) {
-		/* let's not take timer interrupts too often ... */
-		set_dec(0x7fffffff);
-
-		/* should always be true at this point */
-		if (cpu_has_feature(CPU_FTR_CAN_NAP))
-			power4_cpu_offline_powersave();
-		else {
-			HMT_low();
-			HMT_very_low();
-		}
-	}
-}
-#endif /* CONFIG_HOTPLUG_CPU */
-
 #endif /* CONFIG_PPC64 */
 
 define_machine(powermac) {
@@ -726,15 +681,4 @@ define_machine(powermac) {
 	.pcibios_after_init	= pmac_pcibios_after_init,
 	.phys_mem_access_prot	= pci_phys_mem_access_prot,
 #endif
-#ifdef CONFIG_HOTPLUG_CPU
-#ifdef CONFIG_PPC64
-	.cpu_die		= pmac64_cpu_die,
-#endif
-#ifdef CONFIG_PPC32
-	.cpu_die		= pmac32_cpu_die,
-#endif
-#endif
-#if defined(CONFIG_HOTPLUG_CPU) && defined(CONFIG_PPC32)
-	.cpu_die		= generic_mach_cpu_die,
-#endif
 };
diff --git a/arch/powerpc/platforms/powermac/smp.c b/arch/powerpc/platforms/powermac/smp.c
index eda4709..50e15b4 100644
--- a/arch/powerpc/platforms/powermac/smp.c
+++ b/arch/powerpc/platforms/powermac/smp.c
@@ -865,7 +865,7 @@ static void __devinit smp_core99_setup_cpu(int cpu_nr)
 }
 
 
-#if defined(CONFIG_HOTPLUG_CPU) && defined(CONFIG_PPC32)
+#ifdef CONFIG_HOTPLUG_CPU
 
 static int smp_core99_cpu_disable(void)
 {
@@ -878,7 +878,9 @@ static int smp_core99_cpu_disable(void)
 	return 0;
 }
 
-void pmac32_cpu_die(void)
+#ifdef CONFIG_PPC32
+
+static void pmac_cpu_die(void)
 {
 	local_irq_disable();
 	idle_task_exit();
@@ -889,7 +891,52 @@ void pmac32_cpu_die(void)
 	low_cpu_die();
 }
 
-#endif /* CONFIG_HOTPLUG_CPU && CONFIG_PP32 */
+#else /* CONFIG_PPC32 */
+
+static void pmac_cpu_die(void)
+{
+	local_irq_disable();
+	idle_task_exit();
+
+	/*
+	 * turn off as much as possible, we'll be
+	 * kicked out as this will only be invoked
+	 * on core99 platforms for now ...
+	 */
+
+	printk(KERN_INFO "CPU#%d offline\n", smp_processor_id());
+	__get_cpu_var(cpu_state) = CPU_DEAD;
+	smp_wmb();
+
+	/*
+	 * during the path that leads here preemption is disabled,
+	 * reenable it now so that when coming up preempt count is
+	 * zero correctly
+	 */
+	preempt_enable();
+
+	/*
+	 * hard-disable interrupts for the non-NAP case, the NAP code
+	 * needs to re-enable interrupts (but soft-disables them)
+	 */
+	hard_irq_disable();
+
+	while (1) {
+		/* let's not take timer interrupts too often ... */
+		set_dec(0x7fffffff);
+
+		/* should always be true at this point */
+		if (cpu_has_feature(CPU_FTR_CAN_NAP))
+			power4_cpu_offline_powersave();
+		else {
+			HMT_low();
+			HMT_very_low();
+		}
+	}
+}
+
+#endif /* else CONFIG_PPC32 */
+#endif /* CONFIG_HOTPLUG_CPU */
 
 /* Core99 Macs (dual G4s and G5s) */
 struct smp_ops_t core99_smp_ops = {
@@ -933,5 +980,10 @@ void __init pmac_setup_smp(void)
 		smp_ops = &psurge_smp_ops;
 	}
 #endif /* CONFIG_PPC32 */
+
+#ifdef CONFIG_HOTPLUG_CPU
+	ppc_md.cpu_die = pmac_cpu_die;
+#endif
 }
 
+
-- 
cgit v0.10.2


From e872e41b79f61dbc22f85577613925a4a7de1c1a Mon Sep 17 00:00:00 2001
From: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Date: Fri, 11 Feb 2011 14:55:42 +1100
Subject: powerpc/pmac/smp: Remove HMT changes for PowerMac offline code

Those instructions do nothing on non-threaded processors such
as 970's used on those machines.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

diff --git a/arch/powerpc/platforms/powermac/smp.c b/arch/powerpc/platforms/powermac/smp.c
index 50e15b4..53bee66 100644
--- a/arch/powerpc/platforms/powermac/smp.c
+++ b/arch/powerpc/platforms/powermac/smp.c
@@ -928,10 +928,6 @@ static void pmac_cpu_die(void)
 		/* should always be true at this point */
 		if (cpu_has_feature(CPU_FTR_CAN_NAP))
 			power4_cpu_offline_powersave();
-		else {
-			HMT_low();
-			HMT_very_low();
-		}
 	}
 }
 
-- 
cgit v0.10.2


From 62cc67b9df273be18fcb09a071592dedf751c90a Mon Sep 17 00:00:00 2001
From: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Date: Mon, 21 Feb 2011 16:49:58 +1100
Subject: powerpc/pmac/smp: Properly NAP offlined CPU on G5

The current code soft-disables, and then goes to NAP mode which
turns interrupts on. That means that if an interrupt occurs, we
will hit the masked interrupt code path which isn't what we want,
as it will return with EE off, which will either get us out of
NAP mode, or fail to enter it (according to spec).

Instead, let's just rely on the fact that it is safe to take
decrementer interrupts on an offline CPU and leave interrupts
enabled. We can also get rid of the special case in asm for
power4_cpu_offline_powersave() and just use power4_idle().

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

diff --git a/arch/powerpc/include/asm/machdep.h b/arch/powerpc/include/asm/machdep.h
index bcfc0da..578d330 100644
--- a/arch/powerpc/include/asm/machdep.h
+++ b/arch/powerpc/include/asm/machdep.h
@@ -266,7 +266,6 @@ struct machdep_calls {
 
 extern void e500_idle(void);
 extern void power4_idle(void);
-extern void power4_cpu_offline_powersave(void);
 extern void ppc6xx_idle(void);
 extern void book3e_idle(void);
 
diff --git a/arch/powerpc/kernel/head_64.S b/arch/powerpc/kernel/head_64.S
index 782f23d..271140b 100644
--- a/arch/powerpc/kernel/head_64.S
+++ b/arch/powerpc/kernel/head_64.S
@@ -536,6 +536,13 @@ _GLOBAL(pmac_secondary_start)
 	add	r13,r13,r4		/* for this processor.		*/
 	mtspr	SPRN_SPRG_PACA,r13	/* Save vaddr of paca in an SPRG*/
 
+	/* Mark interrupts soft and hard disabled (they might be enabled
+	 * in the PACA when doing hotplug)
+	 */
+	li	r0,0
+	stb	r0,PACASOFTIRQEN(r13)
+	stb	r0,PACAHARDIRQEN(r13)
+
 	/* Create a temp kernel stack for use before relocation is on.	*/
 	ld	r1,PACAEMERGSP(r13)
 	subi	r1,r1,STACK_FRAME_OVERHEAD
diff --git a/arch/powerpc/kernel/idle_power4.S b/arch/powerpc/kernel/idle_power4.S
index 5328709..ba31954 100644
--- a/arch/powerpc/kernel/idle_power4.S
+++ b/arch/powerpc/kernel/idle_power4.S
@@ -53,24 +53,3 @@ END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC)
 	isync
 	b	1b
 
-_GLOBAL(power4_cpu_offline_powersave)
-	/* Go to NAP now */
-	mfmsr	r7
-	rldicl	r0,r7,48,1
-	rotldi	r0,r0,16
-	mtmsrd	r0,1			/* hard-disable interrupts */
-	li	r0,1
-	li	r6,0
-	stb	r0,PACAHARDIRQEN(r13)	/* we'll hard-enable shortly */
-	stb	r6,PACASOFTIRQEN(r13)	/* soft-disable irqs */
-BEGIN_FTR_SECTION
-	DSSALL
-	sync
-END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC)
-	ori	r7,r7,MSR_EE
-	oris	r7,r7,MSR_POW@h
-	sync
-	isync
-	mtmsrd	r7
-	isync
-	blr
diff --git a/arch/powerpc/platforms/powermac/smp.c b/arch/powerpc/platforms/powermac/smp.c
index 53bee66..837989e 100644
--- a/arch/powerpc/platforms/powermac/smp.c
+++ b/arch/powerpc/platforms/powermac/smp.c
@@ -916,18 +916,20 @@ static void pmac_cpu_die(void)
 	preempt_enable();
 
 	/*
-	 * hard-disable interrupts for the non-NAP case, the NAP code
-	 * needs to re-enable interrupts (but soft-disables them)
+	 * Re-enable interrupts. The NAP code needs to enable them
+	 * anyways, do it now so we deal with the case where one already
+	 * happened while soft-disabled.
+	 * We shouldn't get any external interrupts, only decrementer, and the
+	 * decrementer handler is safe for use on offline CPUs
 	 */
-	hard_irq_disable();
+	local_irq_enable();
 
 	while (1) {
 		/* let's not take timer interrupts too often ... */
 		set_dec(0x7fffffff);
 
-		/* should always be true at this point */
-		if (cpu_has_feature(CPU_FTR_CAN_NAP))
-			power4_cpu_offline_powersave();
+		/* Enter NAP mode */
+		power4_idle();
 	}
 }
 
-- 
cgit v0.10.2


From 65e646ac509ff45e9f35e7fc1fea0d2b6723679f Mon Sep 17 00:00:00 2001
From: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Date: Mon, 7 Mar 2011 17:02:49 +1100
Subject: powerpc/pmac: Rename cpu_state in therm_pm72 to avoid collision

This collides with the cpu_state in our SMP code, use processor_state
instead.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

diff --git a/drivers/macintosh/therm_pm72.c b/drivers/macintosh/therm_pm72.c
index bca2af2..c987033 100644
--- a/drivers/macintosh/therm_pm72.c
+++ b/drivers/macintosh/therm_pm72.c
@@ -153,7 +153,7 @@ static struct i2c_adapter *		u3_0;
 static struct i2c_adapter *		u3_1;
 static struct i2c_adapter *		k2;
 static struct i2c_client *		fcu;
-static struct cpu_pid_state		cpu_state[2];
+static struct cpu_pid_state		processor_state[2];
 static struct basckside_pid_params	backside_params;
 static struct backside_pid_state	backside_state;
 static struct drives_pid_state		drives_state;
@@ -664,8 +664,8 @@ static int read_eeprom(int cpu, struct mpu_data *out)
 
 static void fetch_cpu_pumps_minmax(void)
 {
-	struct cpu_pid_state *state0 = &cpu_state[0];
-	struct cpu_pid_state *state1 = &cpu_state[1];
+	struct cpu_pid_state *state0 = &processor_state[0];
+	struct cpu_pid_state *state1 = &processor_state[1];
 	u16 pump_min = 0, pump_max = 0xffff;
 	u16 tmp[4];
 
@@ -717,17 +717,17 @@ static ssize_t show_##name(struct device *dev, struct device_attribute *attr, ch
 	return sprintf(buf, "%d", data);			\
 }
 
-BUILD_SHOW_FUNC_FIX(cpu0_temperature, cpu_state[0].last_temp)
-BUILD_SHOW_FUNC_FIX(cpu0_voltage, cpu_state[0].voltage)
-BUILD_SHOW_FUNC_FIX(cpu0_current, cpu_state[0].current_a)
-BUILD_SHOW_FUNC_INT(cpu0_exhaust_fan_rpm, cpu_state[0].rpm)
-BUILD_SHOW_FUNC_INT(cpu0_intake_fan_rpm, cpu_state[0].intake_rpm)
+BUILD_SHOW_FUNC_FIX(cpu0_temperature, processor_state[0].last_temp)
+BUILD_SHOW_FUNC_FIX(cpu0_voltage, processor_state[0].voltage)
+BUILD_SHOW_FUNC_FIX(cpu0_current, processor_state[0].current_a)
+BUILD_SHOW_FUNC_INT(cpu0_exhaust_fan_rpm, processor_state[0].rpm)
+BUILD_SHOW_FUNC_INT(cpu0_intake_fan_rpm, processor_state[0].intake_rpm)
 
-BUILD_SHOW_FUNC_FIX(cpu1_temperature, cpu_state[1].last_temp)
-BUILD_SHOW_FUNC_FIX(cpu1_voltage, cpu_state[1].voltage)
-BUILD_SHOW_FUNC_FIX(cpu1_current, cpu_state[1].current_a)
-BUILD_SHOW_FUNC_INT(cpu1_exhaust_fan_rpm, cpu_state[1].rpm)
-BUILD_SHOW_FUNC_INT(cpu1_intake_fan_rpm, cpu_state[1].intake_rpm)
+BUILD_SHOW_FUNC_FIX(cpu1_temperature, processor_state[1].last_temp)
+BUILD_SHOW_FUNC_FIX(cpu1_voltage, processor_state[1].voltage)
+BUILD_SHOW_FUNC_FIX(cpu1_current, processor_state[1].current_a)
+BUILD_SHOW_FUNC_INT(cpu1_exhaust_fan_rpm, processor_state[1].rpm)
+BUILD_SHOW_FUNC_INT(cpu1_intake_fan_rpm, processor_state[1].intake_rpm)
 
 BUILD_SHOW_FUNC_FIX(backside_temperature, backside_state.last_temp)
 BUILD_SHOW_FUNC_INT(backside_fan_pwm, backside_state.pwm)
@@ -919,8 +919,8 @@ static void do_cpu_pid(struct cpu_pid_state *state, s32 temp, s32 power)
 
 static void do_monitor_cpu_combined(void)
 {
-	struct cpu_pid_state *state0 = &cpu_state[0];
-	struct cpu_pid_state *state1 = &cpu_state[1];
+	struct cpu_pid_state *state0 = &processor_state[0];
+	struct cpu_pid_state *state1 = &processor_state[1];
 	s32 temp0, power0, temp1, power1;
 	s32 temp_combi, power_combi;
 	int rc, intake, pump;
@@ -1150,7 +1150,7 @@ static void do_monitor_cpu_rack(struct cpu_pid_state *state)
 /*
  * Initialize the state structure for one CPU control loop
  */
-static int init_cpu_state(struct cpu_pid_state *state, int index)
+static int init_processor_state(struct cpu_pid_state *state, int index)
 {
 	int err;
 
@@ -1205,7 +1205,7 @@ static int init_cpu_state(struct cpu_pid_state *state, int index)
 /*
  * Dispose of the state data for one CPU control loop
  */
-static void dispose_cpu_state(struct cpu_pid_state *state)
+static void dispose_processor_state(struct cpu_pid_state *state)
 {
 	if (state->monitor == NULL)
 		return;
@@ -1804,9 +1804,9 @@ static int main_control_loop(void *x)
 		set_pwm_fan(SLOTS_FAN_PWM_INDEX, SLOTS_FAN_DEFAULT_PWM);
 
 	/* Initialize ADCs */
-	initialize_adc(&cpu_state[0]);
-	if (cpu_state[1].monitor != NULL)
-		initialize_adc(&cpu_state[1]);
+	initialize_adc(&processor_state[0]);
+	if (processor_state[1].monitor != NULL)
+		initialize_adc(&processor_state[1]);
 
 	fcu_tickle_ticks = FCU_TICKLE_TICKS;
 
@@ -1833,14 +1833,14 @@ static int main_control_loop(void *x)
 		if (cpu_pid_type == CPU_PID_TYPE_COMBINED)
 			do_monitor_cpu_combined();
 		else if (cpu_pid_type == CPU_PID_TYPE_RACKMAC) {
-			do_monitor_cpu_rack(&cpu_state[0]);
-			if (cpu_state[1].monitor != NULL)
-				do_monitor_cpu_rack(&cpu_state[1]);
+			do_monitor_cpu_rack(&processor_state[0]);
+			if (processor_state[1].monitor != NULL)
+				do_monitor_cpu_rack(&processor_state[1]);
 			// better deal with UP
 		} else {
-			do_monitor_cpu_split(&cpu_state[0]);
-			if (cpu_state[1].monitor != NULL)
-				do_monitor_cpu_split(&cpu_state[1]);
+			do_monitor_cpu_split(&processor_state[0]);
+			if (processor_state[1].monitor != NULL)
+				do_monitor_cpu_split(&processor_state[1]);
 			// better deal with UP
 		}
 		/* Then, the rest */
@@ -1885,8 +1885,8 @@ static int main_control_loop(void *x)
  */
 static void dispose_control_loops(void)
 {
-	dispose_cpu_state(&cpu_state[0]);
-	dispose_cpu_state(&cpu_state[1]);
+	dispose_processor_state(&processor_state[0]);
+	dispose_processor_state(&processor_state[1]);
 	dispose_backside_state(&backside_state);
 	dispose_drives_state(&drives_state);
 	dispose_slots_state(&slots_state);
@@ -1928,12 +1928,12 @@ static int create_control_loops(void)
 	/* Create control loops for everything. If any fail, everything
 	 * fails
 	 */
-	if (init_cpu_state(&cpu_state[0], 0))
+	if (init_processor_state(&processor_state[0], 0))
 		goto fail;
 	if (cpu_pid_type == CPU_PID_TYPE_COMBINED)
 		fetch_cpu_pumps_minmax();
 
-	if (cpu_count > 1 && init_cpu_state(&cpu_state[1], 1))
+	if (cpu_count > 1 && init_processor_state(&processor_state[1], 1))
 		goto fail;
 	if (init_backside_state(&backside_state))
 		goto fail;
-- 
cgit v0.10.2


From d72944457bb7d5c4be43aa1b741cb93c69484c20 Mon Sep 17 00:00:00 2001
From: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Date: Tue, 8 Mar 2011 13:50:37 +1100
Subject: powerpc/smp: Add a smp_ops->bringup_up() done callback

This allows us to stop abusing smp_ops->setup_cpu() for cleanup
tasks that have to take place after the initial boot time CPU
bringup.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

diff --git a/arch/powerpc/include/asm/machdep.h b/arch/powerpc/include/asm/machdep.h
index 578d330..e4f0191 100644
--- a/arch/powerpc/include/asm/machdep.h
+++ b/arch/powerpc/include/asm/machdep.h
@@ -35,6 +35,7 @@ struct smp_ops_t {
 	int   (*probe)(void);
 	void  (*kick_cpu)(int nr);
 	void  (*setup_cpu)(int nr);
+	void  (*bringup_done)(void);
 	void  (*take_timebase)(void);
 	void  (*give_timebase)(void);
 	int   (*cpu_disable)(void);
diff --git a/arch/powerpc/kernel/smp.c b/arch/powerpc/kernel/smp.c
index f6cc5c1..df37397 100644
--- a/arch/powerpc/kernel/smp.c
+++ b/arch/powerpc/kernel/smp.c
@@ -553,7 +553,11 @@ void __init smp_cpus_done(unsigned int max_cpus)
 
 	free_cpumask_var(old_mask);
 
+	if (smp_ops && smp_ops->bringup_done)
+		smp_ops->bringup_done();
+
 	dump_numa_cpu_topology();
+
 }
 
 int arch_sd_sibling_asym_packing(void)
-- 
cgit v0.10.2


From 734796f12351f9a0f38c47b981414f82d852f222 Mon Sep 17 00:00:00 2001
From: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Date: Tue, 8 Mar 2011 13:54:50 +1100
Subject: powerpc/pmac/smp: Fix CPU hotplug crashes on some machines

On some machines that use i2c to synchronize the timebases (such
as PowerMac7,2/7,3 G5 machines), hotplug CPU would crash when
putting back a new CPU online due to the underlying i2c bus being
closed.

This uses the newly added bringup_done() callback to move the close
along with other housekeeping calls, and adds a CPU notifier to
re-open the i2c bus around subsequent hotplug operations

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

diff --git a/arch/powerpc/platforms/powermac/smp.c b/arch/powerpc/platforms/powermac/smp.c
index 837989e..74a43c6 100644
--- a/arch/powerpc/platforms/powermac/smp.c
+++ b/arch/powerpc/platforms/powermac/smp.c
@@ -840,30 +840,68 @@ static void __devinit smp_core99_setup_cpu(int cpu_nr)
 
 	/* Setup openpic */
 	mpic_setup_this_cpu();
+}
 
-	if (cpu_nr == 0) {
-#ifdef CONFIG_PPC64
-		extern void g5_phy_disable_cpu1(void);
+#ifdef CONFIG_HOTPLUG_CPU
+static int smp_core99_cpu_notify(struct notifier_block *self,
+				 unsigned long action, void *hcpu)
+{
+	int rc;
 
-		/* Close i2c bus if it was used for tb sync */
+	switch(action) {
+	case CPU_UP_PREPARE:
+	case CPU_UP_PREPARE_FROZEN:
+		/* Open i2c bus if it was used for tb sync */
 		if (pmac_tb_clock_chip_host) {
-			pmac_i2c_close(pmac_tb_clock_chip_host);
-			pmac_tb_clock_chip_host	= NULL;
+			rc = pmac_i2c_open(pmac_tb_clock_chip_host, 1);
+			if (rc) {
+				pr_err("Failed to open i2c bus for time sync\n");
+				return notifier_from_errno(rc);
+			}
 		}
+		break;
+	case CPU_ONLINE:
+	case CPU_UP_CANCELED:
+		/* Close i2c bus if it was used for tb sync */
+		if (pmac_tb_clock_chip_host)
+			pmac_i2c_close(pmac_tb_clock_chip_host);
+		break;
+	default:
+		break;
+	}
+	return NOTIFY_OK;
+}
 
-		/* If we didn't start the second CPU, we must take
-		 * it off the bus
-		 */
-		if (of_machine_is_compatible("MacRISC4") &&
-		    num_online_cpus() < 2)		
-			g5_phy_disable_cpu1();
-#endif /* CONFIG_PPC64 */
+static struct notifier_block __cpuinitdata smp_core99_cpu_nb = {
+	.notifier_call	= smp_core99_cpu_notify,
+};
+#endif /* CONFIG_HOTPLUG_CPU */
 
-		if (ppc_md.progress)
-			ppc_md.progress("core99_setup_cpu 0 done", 0x349);
+static void __init smp_core99_bringup_done(void)
+{
+#ifdef CONFIG_PPC64
+	extern void g5_phy_disable_cpu1(void);
+
+	/* Close i2c bus if it was used for tb sync */
+	if (pmac_tb_clock_chip_host)
+		pmac_i2c_close(pmac_tb_clock_chip_host);
+
+	/* If we didn't start the second CPU, we must take
+	 * it off the bus.
+	 */
+	if (of_machine_is_compatible("MacRISC4") &&
+	    num_online_cpus() < 2) {
+		set_cpu_present(1, false);
+		g5_phy_disable_cpu1();
 	}
-}
+#endif /* CONFIG_PPC64 */
 
+#ifdef CONFIG_HOTPLUG_CPU
+	register_cpu_notifier(&smp_core99_cpu_nb);
+#endif
+	if (ppc_md.progress)
+		ppc_md.progress("smp_core99_bringup_done", 0x349);
+}
 
 #ifdef CONFIG_HOTPLUG_CPU
 
@@ -940,6 +978,7 @@ static void pmac_cpu_die(void)
 struct smp_ops_t core99_smp_ops = {
 	.message_pass	= smp_mpic_message_pass,
 	.probe		= smp_core99_probe,
+	.bringup_done	= smp_core99_bringup_done,
 	.kick_cpu	= smp_core99_kick_cpu,
 	.setup_cpu	= smp_core99_setup_cpu,
 	.give_timebase	= smp_core99_give_timebase,
-- 
cgit v0.10.2


From 105765f451d3ff007bb4ae3761e825686d9615db Mon Sep 17 00:00:00 2001
From: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Date: Fri, 1 Apr 2011 09:23:37 +1100
Subject: powerpc/smp: Don't expose per-cpu "cpu_state" array

Instead, keep it static, expose an accessor and use that from
the PowerMac code. Avoids easy namespace collisions and will
make it easier to consolidate with other implementations.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

diff --git a/arch/powerpc/include/asm/smp.h b/arch/powerpc/include/asm/smp.h
index 7e99771..a902a0d 100644
--- a/arch/powerpc/include/asm/smp.h
+++ b/arch/powerpc/include/asm/smp.h
@@ -45,7 +45,7 @@ extern void migrate_irqs(void);
 int generic_cpu_disable(void);
 void generic_cpu_die(unsigned int cpu);
 void generic_mach_cpu_die(void);
-DECLARE_PER_CPU(int, cpu_state);
+void generic_set_cpu_dead(unsigned int cpu);
 #endif
 
 #ifdef CONFIG_PPC64
diff --git a/arch/powerpc/kernel/smp.c b/arch/powerpc/kernel/smp.c
index df37397..d7f8cc1 100644
--- a/arch/powerpc/kernel/smp.c
+++ b/arch/powerpc/kernel/smp.c
@@ -305,7 +305,7 @@ void __devinit smp_prepare_boot_cpu(void)
 
 #ifdef CONFIG_HOTPLUG_CPU
 /* State of each CPU during hotplug phases */
-DEFINE_PER_CPU(int, cpu_state) = { 0 };
+static DEFINE_PER_CPU(int, cpu_state) = { 0 };
 
 int generic_cpu_disable(void)
 {
@@ -348,6 +348,11 @@ void generic_mach_cpu_die(void)
 	while (__get_cpu_var(cpu_state) != CPU_UP_PREPARE)
 		cpu_relax();
 }
+
+void generic_set_cpu_dead(unsigned int cpu)
+{
+	per_cpu(cpu_state, cpu) = CPU_DEAD;
+}
 #endif
 
 int __cpuinit __cpu_up(unsigned int cpu)
diff --git a/arch/powerpc/platforms/powermac/smp.c b/arch/powerpc/platforms/powermac/smp.c
index 74a43c6..ce5b4f5 100644
--- a/arch/powerpc/platforms/powermac/smp.c
+++ b/arch/powerpc/platforms/powermac/smp.c
@@ -920,10 +920,12 @@ static int smp_core99_cpu_disable(void)
 
 static void pmac_cpu_die(void)
 {
+	int cpu = smp_processor_id();
+
 	local_irq_disable();
 	idle_task_exit();
-	printk(KERN_DEBUG "CPU%d offline\n", smp_processor_id());
-	__get_cpu_var(cpu_state) = CPU_DEAD;
+	pr_debug("CPU%d offline\n", cpu);
+	generic_set_cpu_dead(cpu);
 	smp_wmb();
 	mb();
 	low_cpu_die();
@@ -933,6 +935,8 @@ static void pmac_cpu_die(void)
 
 static void pmac_cpu_die(void)
 {
+	int cpu = smp_processor_id();
+
 	local_irq_disable();
 	idle_task_exit();
 
@@ -942,8 +946,8 @@ static void pmac_cpu_die(void)
 	 * on core99 platforms for now ...
 	 */
 
-	printk(KERN_INFO "CPU#%d offline\n", smp_processor_id());
-	__get_cpu_var(cpu_state) = CPU_DEAD;
+	printk(KERN_INFO "CPU#%d offline\n", cpu);
+	generic_set_cpu_dead(cpu);
 	smp_wmb();
 
 	/*
-- 
cgit v0.10.2


From c56e58537d504706954a06570b4034c04e5b7500 Mon Sep 17 00:00:00 2001
From: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Date: Tue, 8 Mar 2011 14:40:04 +1100
Subject: powerpc/smp: Create idle threads on demand and properly reset them

Instead of creating idle threads at boot for all possible CPUs, we
create them on demand, like x86 or ARM, and we properly call init_idle
to re-initialize an idle thread when a CPU was unplugged and is now
re-plugged.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

diff --git a/arch/powerpc/kernel/smp.c b/arch/powerpc/kernel/smp.c
index d7f8cc1..54faff9 100644
--- a/arch/powerpc/kernel/smp.c
+++ b/arch/powerpc/kernel/smp.c
@@ -57,6 +57,25 @@
 #define DBG(fmt...)
 #endif
 
+
+/* Store all idle threads, this can be reused instead of creating
+* a new thread. Also avoids complicated thread destroy functionality
+* for idle threads.
+*/
+#ifdef CONFIG_HOTPLUG_CPU
+/*
+ * Needed only for CONFIG_HOTPLUG_CPU because __cpuinitdata is
+ * removed after init for !CONFIG_HOTPLUG_CPU.
+ */
+static DEFINE_PER_CPU(struct task_struct *, idle_thread_array);
+#define get_idle_for_cpu(x)      (per_cpu(idle_thread_array, x))
+#define set_idle_for_cpu(x, p)   (per_cpu(idle_thread_array, x) = (p))
+#else
+static struct task_struct *idle_thread_array[NR_CPUS] __cpuinitdata ;
+#define get_idle_for_cpu(x)      (idle_thread_array[(x)])
+#define set_idle_for_cpu(x, p)   (idle_thread_array[(x)] = (p))
+#endif
+
 struct thread_info *secondary_ti;
 
 DEFINE_PER_CPU(cpumask_var_t, cpu_sibling_map);
@@ -238,23 +257,6 @@ static void __devinit smp_store_cpu_info(int id)
 	per_cpu(cpu_pvr, id) = mfspr(SPRN_PVR);
 }
 
-static void __init smp_create_idle(unsigned int cpu)
-{
-	struct task_struct *p;
-
-	/* create a process for the processor */
-	p = fork_idle(cpu);
-	if (IS_ERR(p))
-		panic("failed fork for CPU %u: %li", cpu, PTR_ERR(p));
-#ifdef CONFIG_PPC64
-	paca[cpu].__current = p;
-	paca[cpu].kstack = (unsigned long) task_thread_info(p)
-		+ THREAD_SIZE - STACK_FRAME_OVERHEAD;
-#endif
-	current_set[cpu] = task_thread_info(p);
-	task_thread_info(p)->cpu = cpu;
-}
-
 void __init smp_prepare_cpus(unsigned int max_cpus)
 {
 	unsigned int cpu;
@@ -288,10 +290,6 @@ void __init smp_prepare_cpus(unsigned int max_cpus)
 			max_cpus = NR_CPUS;
 	else
 		max_cpus = 1;
-
-	for_each_possible_cpu(cpu)
-		if (cpu != boot_cpuid)
-			smp_create_idle(cpu);
 }
 
 void __devinit smp_prepare_boot_cpu(void)
@@ -355,9 +353,62 @@ void generic_set_cpu_dead(unsigned int cpu)
 }
 #endif
 
+struct create_idle {
+	struct work_struct work;
+	struct task_struct *idle;
+	struct completion done;
+	int cpu;
+};
+
+static void __cpuinit do_fork_idle(struct work_struct *work)
+{
+	struct create_idle *c_idle =
+		container_of(work, struct create_idle, work);
+
+	c_idle->idle = fork_idle(c_idle->cpu);
+	complete(&c_idle->done);
+}
+
+static int __cpuinit create_idle(unsigned int cpu)
+{
+	struct thread_info *ti;
+	struct create_idle c_idle = {
+		.cpu	= cpu,
+		.done	= COMPLETION_INITIALIZER_ONSTACK(c_idle.done),
+	};
+	INIT_WORK_ONSTACK(&c_idle.work, do_fork_idle);
+
+	c_idle.idle = get_idle_for_cpu(cpu);
+
+	/* We can't use kernel_thread since we must avoid to
+	 * reschedule the child. We use a workqueue because
+	 * we want to fork from a kernel thread, not whatever
+	 * userspace process happens to be trying to online us.
+	 */
+	if (!c_idle.idle) {
+		schedule_work(&c_idle.work);
+		wait_for_completion(&c_idle.done);
+	} else
+		init_idle(c_idle.idle, cpu);
+	if (IS_ERR(c_idle.idle)) {		
+		pr_err("Failed fork for CPU %u: %li", cpu, PTR_ERR(c_idle.idle));
+		return PTR_ERR(c_idle.idle);
+	}
+	ti = task_thread_info(c_idle.idle);
+
+#ifdef CONFIG_PPC64
+	paca[cpu].__current = c_idle.idle;
+	paca[cpu].kstack = (unsigned long)ti + THREAD_SIZE - STACK_FRAME_OVERHEAD;
+#endif
+	ti->cpu = cpu;
+	current_set[cpu] = ti;
+
+	return 0;
+}
+
 int __cpuinit __cpu_up(unsigned int cpu)
 {
-	int c;
+	int rc, c;
 
 	secondary_ti = current_set[cpu];
 
@@ -365,6 +416,11 @@ int __cpuinit __cpu_up(unsigned int cpu)
 	    (smp_ops->cpu_bootable && !smp_ops->cpu_bootable(cpu)))
 		return -EINVAL;
 
+	/* Make sure we have an idle thread */
+	rc = create_idle(cpu);
+	if (rc)
+		return rc;
+
 	/* Make sure callin-map entry is 0 (can be leftover a CPU
 	 * hotplug
 	 */
-- 
cgit v0.10.2


From aeeafbfa7a5692c68d306043878aa2dd785e5230 Mon Sep 17 00:00:00 2001
From: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Date: Tue, 8 Mar 2011 14:49:33 +1100
Subject: powerpc/smp: Increase vdso_data->processorCount, not just decrease it

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

diff --git a/arch/powerpc/kernel/smp.c b/arch/powerpc/kernel/smp.c
index 54faff9..cbdbb14 100644
--- a/arch/powerpc/kernel/smp.c
+++ b/arch/powerpc/kernel/smp.c
@@ -551,6 +551,10 @@ void __devinit start_secondary(void *unused)
 
 	secondary_cpu_time_init();
 
+#ifdef CONFIG_PPC64
+	if (system_state == SYSTEM_RUNNING)
+		vdso_data->processorCount++;
+#endif
 	ipi_call_lock();
 	notify_cpu_starting(cpu);
 	set_cpu_online(cpu, true);
-- 
cgit v0.10.2


From 76d479a7caff58b1e5f31d80805f7f65f9177696 Mon Sep 17 00:00:00 2001
From: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Date: Tue, 8 Mar 2011 14:57:26 +1100
Subject: powerpc/pmac/smp: Remove no-longer needed preempt workaround

The generic code properly re-initializes the preempt count in the
idle thread now

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

diff --git a/arch/powerpc/platforms/powermac/smp.c b/arch/powerpc/platforms/powermac/smp.c
index ce5b4f5..a830c5e 100644
--- a/arch/powerpc/platforms/powermac/smp.c
+++ b/arch/powerpc/platforms/powermac/smp.c
@@ -951,13 +951,6 @@ static void pmac_cpu_die(void)
 	smp_wmb();
 
 	/*
-	 * during the path that leads here preemption is disabled,
-	 * reenable it now so that when coming up preempt count is
-	 * zero correctly
-	 */
-	preempt_enable();
-
-	/*
 	 * Re-enable interrupts. The NAP code needs to enable them
 	 * anyways, do it now so we deal with the case where one already
 	 * happened while soft-disabled.
-- 
cgit v0.10.2


From c0bb9e45f3a7f67fc358946727bc3d5f23d0f55d Mon Sep 17 00:00:00 2001
From: Anton Blanchard <anton@samba.org>
Date: Wed, 25 Aug 2010 10:22:58 +1000
Subject: kdump: Allow shrinking of kdump region to be overridden

On ppc64 the crashkernel region almost always overlaps an area of firmware.
This works fine except when using the sysfs interface to reduce the kdump
region. If we free the firmware area we are guaranteed to crash.

Rename free_reserved_phys_range to crash_free_reserved_phys_range and make
it a weak function so we can override it.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

diff --git a/include/linux/kexec.h b/include/linux/kexec.h
index 03e8e8d..c2478a3 100644
--- a/include/linux/kexec.h
+++ b/include/linux/kexec.h
@@ -208,6 +208,7 @@ int __init parse_crashkernel(char *cmdline, unsigned long long system_ram,
 		unsigned long long *crash_size, unsigned long long *crash_base);
 int crash_shrink_memory(unsigned long new_size);
 size_t crash_get_memory_size(void);
+void crash_free_reserved_phys_range(unsigned long begin, unsigned long end);
 
 #else /* !CONFIG_KEXEC */
 struct pt_regs;
diff --git a/kernel/kexec.c b/kernel/kexec.c
index ec19b92..4e240a3 100644
--- a/kernel/kexec.c
+++ b/kernel/kexec.c
@@ -1099,7 +1099,8 @@ size_t crash_get_memory_size(void)
 	return size;
 }
 
-static void free_reserved_phys_range(unsigned long begin, unsigned long end)
+void __weak crash_free_reserved_phys_range(unsigned long begin,
+					   unsigned long end)
 {
 	unsigned long addr;
 
@@ -1135,7 +1136,7 @@ int crash_shrink_memory(unsigned long new_size)
 	start = roundup(start, PAGE_SIZE);
 	end = roundup(start + new_size, PAGE_SIZE);
 
-	free_reserved_phys_range(end, crashk_res.end);
+	crash_free_reserved_phys_range(end, crashk_res.end);
 
 	if ((start == end) && (crashk_res.parent != NULL))
 		release_resource(&crashk_res);
-- 
cgit v0.10.2


From 26fcd2a7618db6c16be6aa3e56c0f3c25381e5a3 Mon Sep 17 00:00:00 2001
From: Manoj Iyer <manoj.iyer@canonical.com>
Date: Thu, 31 Mar 2011 22:39:43 -0700
Subject: Input: wacom - add support for Lenovo tablet ID (0xE6)

Signed-off-by: Manoj Iyer <manoj.iyer@canonical.com>
Acked-by: Ping Cheng <pingc@wacom.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

diff --git a/drivers/input/tablet/wacom_wac.c b/drivers/input/tablet/wacom_wac.c
index c87d94f..08ba5ad 100644
--- a/drivers/input/tablet/wacom_wac.c
+++ b/drivers/input/tablet/wacom_wac.c
@@ -1439,6 +1439,9 @@ static const struct wacom_features wacom_features_0xE2 =
 static const struct wacom_features wacom_features_0xE3 =
 	{ "Wacom ISDv4 E3",       WACOM_PKGLEN_TPC2FG,    26202, 16325,  255,
 	  0, TABLETPC2FG, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
+static const struct wacom_features wacom_features_0xE6 =
+	{ "Wacom ISDv4 E6",       WACOM_PKGLEN_TPC2FG,    27760, 15694,  255,
+	  0, TABLETPC2FG, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
 static const struct wacom_features wacom_features_0x47 =
 	{ "Wacom Intuos2 6x8",    WACOM_PKGLEN_INTUOS,    20320, 16240, 1023,
 	  31, INTUOS, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
@@ -1561,6 +1564,7 @@ const struct usb_device_id wacom_ids[] = {
 	{ USB_DEVICE_WACOM(0x9F) },
 	{ USB_DEVICE_WACOM(0xE2) },
 	{ USB_DEVICE_WACOM(0xE3) },
+	{ USB_DEVICE_WACOM(0xE6) },
 	{ USB_DEVICE_WACOM(0x47) },
 	{ USB_DEVICE_LENOVO(0x6004) },
 	{ }
-- 
cgit v0.10.2


From 56d448010f4cde5293fe3adfbc636ede827fdfb0 Mon Sep 17 00:00:00 2001
From: Michal Simek <monstr@monstr.eu>
Date: Wed, 30 Mar 2011 13:13:38 +0200
Subject: microblaze: Fix level/edge irq sensibility

Patches:
"microblaze: Convert to new irq function names"
sha (4adc192ec7d977c74c750320f289af9d61c1caca)
and
"microblaze: Use generic show_interrupts()"
sha(9d61c18b25726306c9231428c17db42e3ff29ba7)

should also setup edge/level in irq_set_chip_and_handler_name
name parameter.

Error log:
~ # cat /proc/interrupts
           CPU0
  2:          2  Xilinx INTC-Xilinx INTC  eth0
  3:          2  Xilinx INTC-Xilinx INTC  eth0
  4:        241  Xilinx INTC-Xilinx INTC  timer
  6:        108  Xilinx INTC-Xilinx INTC  serial

Fixed:
~ # cat /proc/interrupts
           CPU0
  2:          2  Xilinx INTC-level     eth0
  3:          2  Xilinx INTC-level     eth0
  4:        238  Xilinx INTC-edge      timer
  6:        108  Xilinx INTC-level     serial

Signed-off-by: Michal Simek <monstr@monstr.eu>
Acked-by: Thomas Gleixner <tglx@linutronix.de>

---

v2: Fix exchanged edge and level

diff --git a/arch/microblaze/kernel/intc.c b/arch/microblaze/kernel/intc.c
index 5ba7e16..c88f066 100644
--- a/arch/microblaze/kernel/intc.c
+++ b/arch/microblaze/kernel/intc.c
@@ -158,11 +158,11 @@ void __init init_IRQ(void)
 	for (i = 0; i < nr_irq; ++i) {
 		if (intr_type & (0x00000001 << i)) {
 			irq_set_chip_and_handler_name(i, &intc_dev,
-				handle_edge_irq, intc_dev.name);
+				handle_edge_irq, "edge");
 			irq_clear_status_flags(i, IRQ_LEVEL);
 		} else {
 			irq_set_chip_and_handler_name(i, &intc_dev,
-				handle_level_irq, intc_dev.name);
+				handle_level_irq, "level");
 			irq_set_status_flags(i, IRQ_LEVEL);
 		}
 	}
-- 
cgit v0.10.2


From 57bd35d414c453fea2b08e9dad6067ee7e6c188a Mon Sep 17 00:00:00 2001
From: Michal Simek <monstr@monstr.eu>
Date: Thu, 31 Mar 2011 08:11:47 +0200
Subject: microblaze: Wire up new syscalls

Hook up name_to_handle_at, open_by_handle_at, clock_adjtime, syncfs

Signed-off-by: Michal Simek <monstr@monstr.eu>

diff --git a/arch/microblaze/include/asm/unistd.h b/arch/microblaze/include/asm/unistd.h
index d770b00..30edd61 100644
--- a/arch/microblaze/include/asm/unistd.h
+++ b/arch/microblaze/include/asm/unistd.h
@@ -386,8 +386,12 @@
 #define __NR_fanotify_init	368
 #define __NR_fanotify_mark	369
 #define __NR_prlimit64		370
+#define __NR_name_to_handle_at	371
+#define __NR_open_by_handle_at	372
+#define __NR_clock_adjtime	373
+#define __NR_syncfs		374
 
-#define __NR_syscalls		371
+#define __NR_syscalls		375
 
 #ifdef __KERNEL__
 #ifndef __ASSEMBLY__
diff --git a/arch/microblaze/kernel/syscall_table.S b/arch/microblaze/kernel/syscall_table.S
index e88a930..85cea81 100644
--- a/arch/microblaze/kernel/syscall_table.S
+++ b/arch/microblaze/kernel/syscall_table.S
@@ -375,3 +375,7 @@ ENTRY(sys_call_table)
 	.long sys_fanotify_init
 	.long sys_fanotify_mark
 	.long sys_prlimit64	/* 370 */
+	.long sys_name_to_handle_at
+	.long sys_open_by_handle_at
+	.long sys_clock_adjtime
+	.long sys_syncfs
-- 
cgit v0.10.2


From 9e1491de519712c73ec621c4ef4872eca6f2bb57 Mon Sep 17 00:00:00 2001
From: Michal Simek <monstr@monstr.eu>
Date: Fri, 18 Mar 2011 13:52:27 +0100
Subject: microblaze: Fix ftrace

- Do not trace idle loop which takes a lot time
- Fix cache handling in generic ftrace code
- Do not trace lib functions ashldi3, ashrdi3, lshrdi3
  Functions are called from generic ftrace code which
  can't be traced

Signed-off-by: Michal Simek <monstr@monstr.eu>

diff --git a/arch/microblaze/kernel/Makefile b/arch/microblaze/kernel/Makefile
index f0cb5c2..494b63b 100644
--- a/arch/microblaze/kernel/Makefile
+++ b/arch/microblaze/kernel/Makefile
@@ -10,6 +10,7 @@ CFLAGS_REMOVE_early_printk.o = -pg
 CFLAGS_REMOVE_selfmod.o = -pg
 CFLAGS_REMOVE_heartbeat.o = -pg
 CFLAGS_REMOVE_ftrace.o = -pg
+CFLAGS_REMOVE_process.o = -pg
 endif
 
 extra-y := head.o vmlinux.lds
diff --git a/arch/microblaze/kernel/ftrace.c b/arch/microblaze/kernel/ftrace.c
index 515feb4..357d56a 100644
--- a/arch/microblaze/kernel/ftrace.c
+++ b/arch/microblaze/kernel/ftrace.c
@@ -51,6 +51,9 @@ void prepare_ftrace_return(unsigned long *parent, unsigned long self_addr)
 			: "r" (parent), "r" (return_hooker)
 	);
 
+	flush_dcache_range((u32)parent, (u32)parent + 4);
+	flush_icache_range((u32)parent, (u32)parent + 4);
+
 	if (unlikely(faulted)) {
 		ftrace_graph_stop();
 		WARN_ON(1);
@@ -95,6 +98,9 @@ static int ftrace_modify_code(unsigned long addr, unsigned int value)
 	if (unlikely(faulted))
 		return -EFAULT;
 
+	flush_dcache_range(addr, addr + 4);
+	flush_icache_range(addr, addr + 4);
+
 	return 0;
 }
 
@@ -195,8 +201,6 @@ int ftrace_update_ftrace_func(ftrace_func_t func)
 	ret += ftrace_modify_code((unsigned long)&ftrace_caller,
 				  MICROBLAZE_NOP);
 
-	/* All changes are done - lets do caches consistent */
-	flush_icache();
 	return ret;
 }
 
@@ -210,7 +214,6 @@ int ftrace_enable_ftrace_graph_caller(void)
 
 	old_jump = *(unsigned int *)ip; /* save jump over instruction */
 	ret = ftrace_modify_code(ip, MICROBLAZE_NOP);
-	flush_icache();
 
 	pr_debug("%s: Replace instruction: 0x%x\n", __func__, old_jump);
 	return ret;
@@ -222,7 +225,6 @@ int ftrace_disable_ftrace_graph_caller(void)
 	unsigned long ip = (unsigned long)(&ftrace_call_graph);
 
 	ret = ftrace_modify_code(ip, old_jump);
-	flush_icache();
 
 	pr_debug("%s\n", __func__);
 	return ret;
diff --git a/arch/microblaze/lib/Makefile b/arch/microblaze/lib/Makefile
index f1fcbff..10c320a 100644
--- a/arch/microblaze/lib/Makefile
+++ b/arch/microblaze/lib/Makefile
@@ -2,6 +2,12 @@
 # Makefile
 #
 
+ifdef CONFIG_FUNCTION_TRACER
+CFLAGS_REMOVE_ashldi3.o = -pg
+CFLAGS_REMOVE_ashrdi3.o = -pg
+CFLAGS_REMOVE_lshrdi3.o = -pg
+endif
+
 lib-y :=  memset.o
 
 ifeq ($(CONFIG_OPT_LIB_ASM),y)
-- 
cgit v0.10.2


From a4dd99250dc49031e6a92a895dbcc230a4832083 Mon Sep 17 00:00:00 2001
From: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Date: Fri, 1 Apr 2011 07:15:14 -0700
Subject: rcu: create new rcu_access_index() and use in mce

The MCE subsystem needs to sample an RCU-protected index outside of
any protection for that index.  If this was a pointer, we would use
rcu_access_pointer(), but there is no corresponding rcu_access_index().
This commit therefore creates an rcu_access_index() and applies it
to MCE.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Tested-by: Zdenek Kabelac <zkabelac@redhat.com>

diff --git a/arch/x86/kernel/cpu/mcheck/mce.c b/arch/x86/kernel/cpu/mcheck/mce.c
index 5a05ef6..3385ea2 100644
--- a/arch/x86/kernel/cpu/mcheck/mce.c
+++ b/arch/x86/kernel/cpu/mcheck/mce.c
@@ -1626,7 +1626,7 @@ out:
 static unsigned int mce_poll(struct file *file, poll_table *wait)
 {
 	poll_wait(file, &mce_wait, wait);
-	if (rcu_dereference_check_mce(mcelog.next))
+	if (rcu_access_index(mcelog.next))
 		return POLLIN | POLLRDNORM;
 	if (!mce_apei_read_done && apei_check_mce())
 		return POLLIN | POLLRDNORM;
diff --git a/include/linux/rcupdate.h b/include/linux/rcupdate.h
index af56148..ff422d2 100644
--- a/include/linux/rcupdate.h
+++ b/include/linux/rcupdate.h
@@ -339,6 +339,12 @@ extern int rcu_my_thread_group_empty(void);
 		((typeof(*p) __force __kernel *)(p)); \
 	})
 
+#define __rcu_access_index(p, space) \
+	({ \
+		typeof(p) _________p1 = ACCESS_ONCE(p); \
+		rcu_dereference_sparse(p, space); \
+		(_________p1); \
+	})
 #define __rcu_dereference_index_check(p, c) \
 	({ \
 		typeof(p) _________p1 = ACCESS_ONCE(p); \
@@ -429,6 +435,20 @@ extern int rcu_my_thread_group_empty(void);
 #define rcu_dereference_raw(p) rcu_dereference_check(p, 1) /*@@@ needed? @@@*/
 
 /**
+ * rcu_access_index() - fetch RCU index with no dereferencing
+ * @p: The index to read
+ *
+ * Return the value of the specified RCU-protected index, but omit the
+ * smp_read_barrier_depends() and keep the ACCESS_ONCE().  This is useful
+ * when the value of this index is accessed, but the index is not
+ * dereferenced, for example, when testing an RCU-protected index against
+ * -1.  Although rcu_access_index() may also be used in cases where
+ * update-side locks prevent the value of the index from changing, you
+ * should instead use rcu_dereference_index_protected() for this use case.
+ */
+#define rcu_access_index(p) __rcu_access_index((p), __rcu)
+
+/**
  * rcu_dereference_index_check() - rcu_dereference for indices with debug checking
  * @p: The pointer to read, prior to dereferencing
  * @c: The conditions under which the dereference will take place
-- 
cgit v0.10.2


From 12ff414e2e4512f59fe191dc18e856e2939a1c79 Mon Sep 17 00:00:00 2001
From: Kelly Anderson <kelly@silka.with-linux.com>
Date: Fri, 1 Apr 2011 11:58:25 +0200
Subject: ALSA: pcm: fix infinite loop in snd_pcm_update_hw_ptr0()

When period interrupts are disabled, snd_pcm_update_hw_ptr0() compares
the current time against the time estimated for the current hardware
pointer to detect xruns.  The somewhat fuzzy threshold in the while loop
makes it possible that hdelta becomes negative; the comparison being
done with unsigned types then makes the loop go through the entire 263
negative range, and, depending on the value, never reach an unsigned
value that is small enough to stop the loop.  Doing this with interrupts
disabled results in the machine locking up.

To prevent this, ensure that the loop condition uses signed types for
both operands so that the comparison is correctly done.

Many thanks to Kelly Anderson for debugging this.

Reported-by: Nix <nix@esperi.org.uk>
Reported-by: "Christopher K." <c.krooss@googlemail.com>
Reported-and-tested-by: Kelly Anderson <kelly@silka.with-linux.com>
Signed-off-by: Kelly Anderson <kelly@silka.with-linux.com>
[cl: remove unneeded casts; use a temp variable]
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Cc: 2.6.38 <stable@kernel.org>

Signed-off-by: Takashi Iwai <tiwai@suse.de>

diff --git a/sound/core/pcm_lib.c b/sound/core/pcm_lib.c
index a82e3756..64449cb 100644
--- a/sound/core/pcm_lib.c
+++ b/sound/core/pcm_lib.c
@@ -375,6 +375,7 @@ static int snd_pcm_update_hw_ptr0(struct snd_pcm_substream *substream,
 	}
 
 	if (runtime->no_period_wakeup) {
+		snd_pcm_sframes_t xrun_threshold;
 		/*
 		 * Without regular period interrupts, we have to check
 		 * the elapsed time to detect xruns.
@@ -383,7 +384,8 @@ static int snd_pcm_update_hw_ptr0(struct snd_pcm_substream *substream,
 		if (jdelta < runtime->hw_ptr_buffer_jiffies / 2)
 			goto no_delta_check;
 		hdelta = jdelta - delta * HZ / runtime->rate;
-		while (hdelta > runtime->hw_ptr_buffer_jiffies / 2 + 1) {
+		xrun_threshold = runtime->hw_ptr_buffer_jiffies / 2 + 1;
+		while (hdelta > xrun_threshold) {
 			delta += runtime->buffer_size;
 			hw_base += runtime->buffer_size;
 			if (hw_base >= runtime->boundary)
-- 
cgit v0.10.2


From 4275f4c8f7589bcac55d880529f58dac39815c95 Mon Sep 17 00:00:00 2001
From: Tony Luck <tony.luck@intel.com>
Date: Fri, 1 Apr 2011 10:56:03 -0700
Subject: [IA64] fix build warning: argument 1 of 'irqd_irq_disabled'

In commit f5e5bf088bd3d30990efb7429aaf9f1e5134ffd6
  ia64: Use irqd_irq_disabled() instead of desc->status access

Thomas forgot to convert from irq to *irq_data.

Add a call to irq_get_irq_data() to fix that.

Signed-off-by: Tony Luck <tony.luck@intel.com>

diff --git a/arch/ia64/sn/kernel/irq.c b/arch/ia64/sn/kernel/irq.c
index 7f399f9..139c018 100644
--- a/arch/ia64/sn/kernel/irq.c
+++ b/arch/ia64/sn/kernel/irq.c
@@ -412,7 +412,7 @@ sn_call_force_intr_provider(struct sn_irq_info *sn_irq_info)
 	pci_provider = sn_pci_provider[sn_irq_info->irq_bridge_type];
 
 	/* Don't force an interrupt if the irq has been disabled */
-	if (!irqd_irq_disabled(sn_irq_info->irq_irq) &&
+	if (!irqd_irq_disabled(irq_get_irq_data(sn_irq_info->irq_irq)) &&
 	    pci_provider && pci_provider->force_interrupt)
 		(*pci_provider->force_interrupt)(sn_irq_info);
 }
-- 
cgit v0.10.2


From 1591cb60838603c8cc2c540192c8244962436539 Mon Sep 17 00:00:00 2001
From: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Date: Fri, 1 Apr 2011 05:27:51 +0000
Subject: starfire: clean up dma_addr_t size test

Now we have CONFIG_ARCH_DMA_ADDR_T_64BIT. We can fix the hacky
dma_addr_t size test cleanly.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: David S. Miller <davem@davemloft.net>

diff --git a/drivers/net/starfire.c b/drivers/net/starfire.c
index a4f2bd5..36045f3 100644
--- a/drivers/net/starfire.c
+++ b/drivers/net/starfire.c
@@ -144,11 +144,7 @@ static int full_duplex[MAX_UNITS] = {0, };
 /* Time in jiffies before concluding the transmitter is hung. */
 #define TX_TIMEOUT	(2 * HZ)
 
-/*
- * This SUCKS.
- * We need a much better method to determine if dma_addr_t is 64-bit.
- */
-#if (defined(__i386__) && defined(CONFIG_HIGHMEM64G)) || defined(__x86_64__) || defined (__ia64__) || defined(__alpha__) || (defined(CONFIG_MIPS) && ((defined(CONFIG_HIGHMEM) && defined(CONFIG_64BIT_PHYS_ADDR)) || defined(CONFIG_64BIT))) || (defined(__powerpc64__) || defined(CONFIG_PHYS_64BIT))
+#ifdef CONFIG_ARCH_DMA_ADDR_T_64BIT
 /* 64-bit dma_addr_t */
 #define ADDR_64BITS	/* This chip uses 64 bit addresses. */
 #define netdrv_addr_t __le64
-- 
cgit v0.10.2


From c261344d3ce3edac781f9d3c7eabe2e96d8e8fe8 Mon Sep 17 00:00:00 2001
From: Arnd Bergmann <arnd.bergmann@linaro.org>
Date: Fri, 1 Apr 2011 20:12:02 -0700
Subject: usbnet: use eth%d name for known ethernet devices

The documentation for the USB ethernet devices suggests that
only some devices are supposed to use usb0 as the network interface
name instead of eth0. The logic used there, and documented in
Kconfig for CDC is that eth0 will be used when the mac address
is a globally assigned one, but usb0 is used for the locally
managed range that is typically used on point-to-point links.

Unfortunately, this has caused a lot of pain on the smsc95xx
device that is used on the popular pandaboard without an
EEPROM to store the MAC address, which causes the driver to
call random_ether_address().

Obviously, there should be a proper MAC addressed assigned to
the device, and discussions are ongoing about how to solve
this, but this patch at least makes sure that the default
interface naming gets a little saner and matches what the
user can expect based on the documentation, including for
new devices.

The approach taken here is to flag whether a device might be a
point-to-point link with the new FLAG_POINTTOPOINT setting in
the usbnet driver_info. A driver can set both FLAG_POINTTOPOINT
and FLAG_ETHER if it is not sure (e.g. cdc_ether), or just one
of the two.  The usbnet framework only looks at the MAC address
for device naming if both flags are set, otherwise it trusts the
flag.

Signed-off-by: Arnd Bergmann <arnd.bergmann@linaro.org>
Tested-by: Andy Green <andy.green@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

diff --git a/drivers/net/usb/cdc_eem.c b/drivers/net/usb/cdc_eem.c
index 5f3b976..8f12854 100644
--- a/drivers/net/usb/cdc_eem.c
+++ b/drivers/net/usb/cdc_eem.c
@@ -340,7 +340,7 @@ next:
 
 static const struct driver_info eem_info = {
 	.description =	"CDC EEM Device",
-	.flags =	FLAG_ETHER,
+	.flags =	FLAG_ETHER | FLAG_POINTTOPOINT,
 	.bind =		eem_bind,
 	.rx_fixup =	eem_rx_fixup,
 	.tx_fixup =	eem_tx_fixup,
diff --git a/drivers/net/usb/cdc_ether.c b/drivers/net/usb/cdc_ether.c
index 51c259b..341f705 100644
--- a/drivers/net/usb/cdc_ether.c
+++ b/drivers/net/usb/cdc_ether.c
@@ -452,7 +452,7 @@ static int cdc_manage_power(struct usbnet *dev, int on)
 
 static const struct driver_info	cdc_info = {
 	.description =	"CDC Ethernet Device",
-	.flags =	FLAG_ETHER,
+	.flags =	FLAG_ETHER | FLAG_POINTTOPOINT,
 	// .check_connect = cdc_check_connect,
 	.bind =		usbnet_cdc_bind,
 	.unbind =	usbnet_cdc_unbind,
diff --git a/drivers/net/usb/cdc_ncm.c b/drivers/net/usb/cdc_ncm.c
index 7113168..967371f 100644
--- a/drivers/net/usb/cdc_ncm.c
+++ b/drivers/net/usb/cdc_ncm.c
@@ -1237,7 +1237,7 @@ static int cdc_ncm_manage_power(struct usbnet *dev, int status)
 
 static const struct driver_info cdc_ncm_info = {
 	.description = "CDC NCM",
-	.flags = FLAG_NO_SETINT | FLAG_MULTI_PACKET,
+	.flags = FLAG_POINTTOPOINT | FLAG_NO_SETINT | FLAG_MULTI_PACKET,
 	.bind = cdc_ncm_bind,
 	.unbind = cdc_ncm_unbind,
 	.check_connect = cdc_ncm_check_connect,
diff --git a/drivers/net/usb/cdc_subset.c b/drivers/net/usb/cdc_subset.c
index ca39ace..fc5f13d 100644
--- a/drivers/net/usb/cdc_subset.c
+++ b/drivers/net/usb/cdc_subset.c
@@ -89,6 +89,7 @@ static int always_connected (struct usbnet *dev)
 
 static const struct driver_info	ali_m5632_info = {
 	.description =	"ALi M5632",
+	.flags       = FLAG_POINTTOPOINT,
 };
 
 #endif
@@ -110,6 +111,7 @@ static const struct driver_info	ali_m5632_info = {
 
 static const struct driver_info	an2720_info = {
 	.description =	"AnchorChips/Cypress 2720",
+	.flags       = FLAG_POINTTOPOINT,
 	// no reset available!
 	// no check_connect available!
 
@@ -132,6 +134,7 @@ static const struct driver_info	an2720_info = {
 
 static const struct driver_info	belkin_info = {
 	.description =	"Belkin, eTEK, or compatible",
+	.flags       = FLAG_POINTTOPOINT,
 };
 
 #endif	/* CONFIG_USB_BELKIN */
@@ -157,6 +160,7 @@ static const struct driver_info	belkin_info = {
 static const struct driver_info	epson2888_info = {
 	.description =	"Epson USB Device",
 	.check_connect = always_connected,
+	.flags = FLAG_POINTTOPOINT,
 
 	.in = 4, .out = 3,
 };
@@ -173,6 +177,7 @@ static const struct driver_info	epson2888_info = {
 #define HAVE_HARDWARE
 static const struct driver_info kc2190_info = {
 	.description =  "KC Technology KC-190",
+	.flags = FLAG_POINTTOPOINT,
 };
 #endif /* CONFIG_USB_KC2190 */
 
@@ -200,16 +205,19 @@ static const struct driver_info kc2190_info = {
 static const struct driver_info	linuxdev_info = {
 	.description =	"Linux Device",
 	.check_connect = always_connected,
+	.flags = FLAG_POINTTOPOINT,
 };
 
 static const struct driver_info	yopy_info = {
 	.description =	"Yopy",
 	.check_connect = always_connected,
+	.flags = FLAG_POINTTOPOINT,
 };
 
 static const struct driver_info	blob_info = {
 	.description =	"Boot Loader OBject",
 	.check_connect = always_connected,
+	.flags = FLAG_POINTTOPOINT,
 };
 
 #endif	/* CONFIG_USB_ARMLINUX */
diff --git a/drivers/net/usb/gl620a.c b/drivers/net/usb/gl620a.c
index dcd57c3..c4cfd1d 100644
--- a/drivers/net/usb/gl620a.c
+++ b/drivers/net/usb/gl620a.c
@@ -193,7 +193,7 @@ static int genelink_bind(struct usbnet *dev, struct usb_interface *intf)
 
 static const struct driver_info	genelink_info = {
 	.description =	"Genesys GeneLink",
-	.flags =	FLAG_FRAMING_GL | FLAG_NO_SETINT,
+	.flags =	FLAG_POINTTOPOINT | FLAG_FRAMING_GL | FLAG_NO_SETINT,
 	.bind =		genelink_bind,
 	.rx_fixup =	genelink_rx_fixup,
 	.tx_fixup =	genelink_tx_fixup,
diff --git a/drivers/net/usb/net1080.c b/drivers/net/usb/net1080.c
index ba72a72..01db460 100644
--- a/drivers/net/usb/net1080.c
+++ b/drivers/net/usb/net1080.c
@@ -560,7 +560,7 @@ static int net1080_bind(struct usbnet *dev, struct usb_interface *intf)
 
 static const struct driver_info	net1080_info = {
 	.description =	"NetChip TurboCONNECT",
-	.flags =	FLAG_FRAMING_NC,
+	.flags =	FLAG_POINTTOPOINT | FLAG_FRAMING_NC,
 	.bind =		net1080_bind,
 	.reset =	net1080_reset,
 	.check_connect = net1080_check_connect,
diff --git a/drivers/net/usb/plusb.c b/drivers/net/usb/plusb.c
index 08ad269..823c537 100644
--- a/drivers/net/usb/plusb.c
+++ b/drivers/net/usb/plusb.c
@@ -96,7 +96,7 @@ static int pl_reset(struct usbnet *dev)
 
 static const struct driver_info	prolific_info = {
 	.description =	"Prolific PL-2301/PL-2302",
-	.flags =	FLAG_NO_SETINT,
+	.flags =	FLAG_POINTTOPOINT | FLAG_NO_SETINT,
 		/* some PL-2302 versions seem to fail usb_set_interface() */
 	.reset =	pl_reset,
 };
diff --git a/drivers/net/usb/rndis_host.c b/drivers/net/usb/rndis_host.c
index dd8a4ad..5994a25 100644
--- a/drivers/net/usb/rndis_host.c
+++ b/drivers/net/usb/rndis_host.c
@@ -573,7 +573,7 @@ EXPORT_SYMBOL_GPL(rndis_tx_fixup);
 
 static const struct driver_info	rndis_info = {
 	.description =	"RNDIS device",
-	.flags =	FLAG_ETHER | FLAG_FRAMING_RN | FLAG_NO_SETINT,
+	.flags =	FLAG_ETHER | FLAG_POINTTOPOINT | FLAG_FRAMING_RN | FLAG_NO_SETINT,
 	.bind =		rndis_bind,
 	.unbind =	rndis_unbind,
 	.status =	rndis_status,
diff --git a/drivers/net/usb/usbnet.c b/drivers/net/usb/usbnet.c
index cf58b76..069c1cf 100644
--- a/drivers/net/usb/usbnet.c
+++ b/drivers/net/usb/usbnet.c
@@ -1380,7 +1380,8 @@ usbnet_probe (struct usb_interface *udev, const struct usb_device_id *prod)
 		// else "eth%d" when there's reasonable doubt.  userspace
 		// can rename the link if it knows better.
 		if ((dev->driver_info->flags & FLAG_ETHER) != 0 &&
-		    (net->dev_addr [0] & 0x02) == 0)
+		    ((dev->driver_info->flags & FLAG_POINTTOPOINT) == 0 ||
+		     (net->dev_addr [0] & 0x02) == 0))
 			strcpy (net->name, "eth%d");
 		/* WLAN devices should always be named "wlan%d" */
 		if ((dev->driver_info->flags & FLAG_WLAN) != 0)
diff --git a/drivers/net/usb/zaurus.c b/drivers/net/usb/zaurus.c
index 3eb0b16..241756e 100644
--- a/drivers/net/usb/zaurus.c
+++ b/drivers/net/usb/zaurus.c
@@ -102,7 +102,7 @@ static int always_connected (struct usbnet *dev)
 
 static const struct driver_info	zaurus_sl5x00_info = {
 	.description =	"Sharp Zaurus SL-5x00",
-	.flags =	FLAG_FRAMING_Z,
+	.flags =	FLAG_POINTTOPOINT | FLAG_FRAMING_Z,
 	.check_connect = always_connected,
 	.bind =		zaurus_bind,
 	.unbind =	usbnet_cdc_unbind,
@@ -112,7 +112,7 @@ static const struct driver_info	zaurus_sl5x00_info = {
 
 static const struct driver_info	zaurus_pxa_info = {
 	.description =	"Sharp Zaurus, PXA-2xx based",
-	.flags =	FLAG_FRAMING_Z,
+	.flags =	FLAG_POINTTOPOINT | FLAG_FRAMING_Z,
 	.check_connect = always_connected,
 	.bind =		zaurus_bind,
 	.unbind =	usbnet_cdc_unbind,
@@ -122,7 +122,7 @@ static const struct driver_info	zaurus_pxa_info = {
 
 static const struct driver_info	olympus_mxl_info = {
 	.description =	"Olympus R1000",
-	.flags =	FLAG_FRAMING_Z,
+	.flags =	FLAG_POINTTOPOINT | FLAG_FRAMING_Z,
 	.check_connect = always_connected,
 	.bind =		zaurus_bind,
 	.unbind =	usbnet_cdc_unbind,
@@ -258,7 +258,7 @@ bad_desc:
 
 static const struct driver_info	bogus_mdlm_info = {
 	.description =	"pseudo-MDLM (BLAN) device",
-	.flags =	FLAG_FRAMING_Z,
+	.flags =	FLAG_POINTTOPOINT | FLAG_FRAMING_Z,
 	.check_connect = always_connected,
 	.tx_fixup =	zaurus_tx_fixup,
 	.bind =		blan_mdlm_bind,
diff --git a/include/linux/usb/usbnet.h b/include/linux/usb/usbnet.h
index 201f222..3c7329b 100644
--- a/include/linux/usb/usbnet.h
+++ b/include/linux/usb/usbnet.h
@@ -97,6 +97,8 @@ struct driver_info {
 
 #define FLAG_LINK_INTR	0x0800		/* updates link (carrier) status */
 
+#define FLAG_POINTTOPOINT 0x1000	/* possibly use "usb%d" names */
+
 /*
  * Indicates to usbnet, that USB driver accumulates multiple IP packets.
  * Affects statistic (counters) and short packet handling.
-- 
cgit v0.10.2


From 4dd5ffe4fc36128dc86568ddeaeae359e6037762 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Micha=C5=82=20Miros=C5=82aw?= <mirq-linux@rere.qmqm.pl>
Date: Wed, 30 Mar 2011 23:58:08 +0000
Subject: net: Fix dev dev_ethtool_get_rx_csum() for forced NETIF_F_RXCSUM
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

dev_ethtool_get_rx_csum() won't report rx checksumming when it's not
changeable and driver is converted to hw_features and friends. Fix this.

(dev->hw_features & NETIF_F_RXCSUM) check is dropped - if the
ethtool_ops->get_rx_csum is set, then driver is not coverted, yet.

Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: David S. Miller <davem@davemloft.net>

diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h
index 5eeb2cd..0249fe7 100644
--- a/include/linux/netdevice.h
+++ b/include/linux/netdevice.h
@@ -2598,8 +2598,8 @@ static inline int dev_ethtool_get_settings(struct net_device *dev,
 
 static inline u32 dev_ethtool_get_rx_csum(struct net_device *dev)
 {
-	if (dev->hw_features & NETIF_F_RXCSUM)
-		return !!(dev->features & NETIF_F_RXCSUM);
+	if (dev->features & NETIF_F_RXCSUM)
+		return 1;
 	if (!dev->ethtool_ops || !dev->ethtool_ops->get_rx_csum)
 		return 0;
 	return dev->ethtool_ops->get_rx_csum(dev);
-- 
cgit v0.10.2


From 028dba0ac3fc3c82da06110b011fce22a5ffad00 Mon Sep 17 00:00:00 2001
From: Wei Yongjun <yjwei@cn.fujitsu.com>
Date: Thu, 31 Mar 2011 23:38:54 +0000
Subject: sctp: fix auth_hmacs field's length of struct sctp_cookie

auth_hmacs field of struct sctp_cookie is used for store
Requested HMAC Algorithm Parameter, and each HMAC Identifier
is 2 bytes, so the length should be:
  SCTP_AUTH_NUM_HMACS * sizeof(__u16) + 2

Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

diff --git a/include/net/sctp/structs.h b/include/net/sctp/structs.h
index cc9185c..0f6e60a 100644
--- a/include/net/sctp/structs.h
+++ b/include/net/sctp/structs.h
@@ -422,7 +422,7 @@ struct sctp_cookie {
 	__u32 adaptation_ind;
 
 	__u8 auth_random[sizeof(sctp_paramhdr_t) + SCTP_AUTH_RANDOM_LENGTH];
-	__u8 auth_hmacs[SCTP_AUTH_NUM_HMACS + 2];
+	__u8 auth_hmacs[SCTP_AUTH_NUM_HMACS * sizeof(__u16) + 2];
 	__u8 auth_chunks[sizeof(sctp_paramhdr_t) + SCTP_AUTH_MAX_CHUNKS];
 
 	/* This is a shim for my peer's INIT packet, followed by
-- 
cgit v0.10.2


From 2cab86bee8e7f353e6ac8c15b3eb906643497644 Mon Sep 17 00:00:00 2001
From: Wei Yongjun <yjwei@cn.fujitsu.com>
Date: Thu, 31 Mar 2011 23:42:55 +0000
Subject: sctp: malloc enough room for asconf-ack chunk

Sometime the ASCONF_ACK parameters can equal to the fourfold of
ASCONF parameters, this only happend in some special case:

  ASCONF parameter is :
    Unrecognized Parameter (4 bytes)
  ASCONF_ACK parameter should be:
    Error Cause Indication parameter (8 bytes header)
     + Error Cause (4 bytes header)
       + Unrecognized Parameter (4bytes)

Four 4bytes Unrecognized Parameters in ASCONF chunk will cause panic.

Pid: 0, comm: swapper Not tainted 2.6.38-next+ #22 Bochs Bochs
EIP: 0060:[<c0717eae>] EFLAGS: 00010246 CPU: 0
EIP is at skb_put+0x60/0x70
EAX: 00000077 EBX: c09060e2 ECX: dec1dc30 EDX: c09469c0
ESI: 00000000 EDI: de3c8d40 EBP: dec1dc58 ESP: dec1dc2c
 DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068
Process swapper (pid: 0, ti=dec1c000 task=c09aef20 task.ti=c0980000)
Stack:
 c09469c0 e1894fa4 00000044 00000004 de3c8d00 de3c8d00 de3c8d44 de3c8d40
 c09060e2 de25dd80 de3c8d40 dec1dc7c e1894fa4 dec1dcb0 00000040 00000004
 00000000 00000800 00000004 00000004 dec1dce0 e1895a2b dec1dcb4 de25d960
Call Trace:
 [<e1894fa4>] ? sctp_addto_chunk+0x4e/0x89 [sctp]
 [<e1894fa4>] sctp_addto_chunk+0x4e/0x89 [sctp]
 [<e1895a2b>] sctp_process_asconf+0x32f/0x3d1 [sctp]
 [<e188d554>] sctp_sf_do_asconf+0xf8/0x173 [sctp]
 [<e1890b02>] sctp_do_sm+0xb8/0x159 [sctp]
 [<e18a2248>] ? sctp_cname+0x0/0x52 [sctp]
 [<e189392d>] sctp_assoc_bh_rcv+0xac/0xe3 [sctp]
 [<e1897d76>] sctp_inq_push+0x2d/0x30 [sctp]
 [<e18a21b2>] sctp_rcv+0x7a7/0x83d [sctp]
 [<c077a95c>] ? ipv4_confirm+0x118/0x125
 [<c073a970>] ? nf_iterate+0x34/0x62
 [<c074789d>] ? ip_local_deliver_finish+0x0/0x194
 [<c074789d>] ? ip_local_deliver_finish+0x0/0x194
 [<c0747992>] ip_local_deliver_finish+0xf5/0x194
 [<c074789d>] ? ip_local_deliver_finish+0x0/0x194
 [<c0747a6e>] NF_HOOK.clone.1+0x3d/0x44
 [<c0747ab3>] ip_local_deliver+0x3e/0x44
 [<c074789d>] ? ip_local_deliver_finish+0x0/0x194
 [<c074775c>] ip_rcv_finish+0x29f/0x2c7
 [<c07474bd>] ? ip_rcv_finish+0x0/0x2c7
 [<c0747a6e>] NF_HOOK.clone.1+0x3d/0x44
 [<c0747cae>] ip_rcv+0x1f5/0x233
 [<c07474bd>] ? ip_rcv_finish+0x0/0x2c7
 [<c071dce3>] __netif_receive_skb+0x310/0x336
 [<c07221f3>] netif_receive_skb+0x4b/0x51
 [<e0a4ed3d>] cp_rx_poll+0x1e7/0x29c [8139cp]
 [<c072275e>] net_rx_action+0x65/0x13a
 [<c0445a54>] __do_softirq+0xa1/0x149
 [<c04459b3>] ? __do_softirq+0x0/0x149
 <IRQ>
 [<c0445891>] ? irq_exit+0x37/0x72
 [<c040a7e9>] ? do_IRQ+0x81/0x95
 [<c07b3670>] ? common_interrupt+0x30/0x38
 [<c0428058>] ? native_safe_halt+0xa/0xc
 [<c040f5d7>] ? default_idle+0x58/0x92
 [<c0408fb0>] ? cpu_idle+0x96/0xb2
 [<c0797989>] ? rest_init+0x5d/0x5f
 [<c09fd90c>] ? start_kernel+0x34b/0x350
 [<c09fd0cb>] ? i386_start_kernel+0xba/0xc1

Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

diff --git a/net/sctp/sm_make_chunk.c b/net/sctp/sm_make_chunk.c
index de98665..b3434cc 100644
--- a/net/sctp/sm_make_chunk.c
+++ b/net/sctp/sm_make_chunk.c
@@ -3106,10 +3106,10 @@ struct sctp_chunk *sctp_process_asconf(struct sctp_association *asoc,
 
 	/* create an ASCONF_ACK chunk.
 	 * Based on the definitions of parameters, we know that the size of
-	 * ASCONF_ACK parameters are less than or equal to the twice of ASCONF
+	 * ASCONF_ACK parameters are less than or equal to the fourfold of ASCONF
 	 * parameters.
 	 */
-	asconf_ack = sctp_make_asconf_ack(asoc, serial, chunk_len * 2);
+	asconf_ack = sctp_make_asconf_ack(asoc, serial, chunk_len * 4);
 	if (!asconf_ack)
 		goto done;
 
-- 
cgit v0.10.2


From 2fceec13375e5d98ef033c6b0ee03943fc460950 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Ilpo=20J=C3=A4rvinen?= <ilpo.jarvinen@helsinki.fi>
Date: Fri, 1 Apr 2011 21:47:41 -0700
Subject: tcp: len check is unnecessarily devastating, change to WARN_ON
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

All callers are prepared for alloc failures anyway, so this error
can safely be boomeranged to the callers domain without super
bad consequences. ...At worst the connection might go into a state
where each RTO tries to (unsuccessfully) re-fragment with such
a mis-sized value and eventually dies.

Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi>
Signed-off-by: David S. Miller <davem@davemloft.net>

diff --git a/net/ipv4/tcp_output.c b/net/ipv4/tcp_output.c
index dfa5beb..8b0d016 100644
--- a/net/ipv4/tcp_output.c
+++ b/net/ipv4/tcp_output.c
@@ -1003,7 +1003,8 @@ int tcp_fragment(struct sock *sk, struct sk_buff *skb, u32 len,
 	int nlen;
 	u8 flags;
 
-	BUG_ON(len > skb->len);
+	if (WARN_ON(len > skb->len))
+		return -EINVAL;
 
 	nsize = skb_headlen(skb) - len;
 	if (nsize < 0)
-- 
cgit v0.10.2


From df93878c9623146de8050308d65bcfeea4fb0aca Mon Sep 17 00:00:00 2001
From: Guan Xuetao <gxt@mprc.pku.edu.cn>
Date: Tue, 29 Mar 2011 21:30:04 +0800
Subject: unicore32 ldscript fix: add cacheline parameter to PERCPU() macro

Also, adjust cacheline parameter of RW_DATA_SECTION and EXCEPTION_TABLE

Signed-off-by: Guan Xuetao <gxt@mprc.pku.edu.cn>
Acked-by: Arnd Bergmann <arnd@arndb.de>

diff --git a/arch/unicore32/kernel/vmlinux.lds.S b/arch/unicore32/kernel/vmlinux.lds.S
index 0b4eb89..9bf7f7a 100644
--- a/arch/unicore32/kernel/vmlinux.lds.S
+++ b/arch/unicore32/kernel/vmlinux.lds.S
@@ -14,6 +14,7 @@
 #include <asm/thread_info.h>
 #include <asm/memory.h>
 #include <asm/page.h>
+#include <asm/cache.h>
 
 OUTPUT_ARCH(unicore32)
 ENTRY(stext)
@@ -29,7 +30,7 @@ SECTIONS
 	HEAD_TEXT_SECTION
 	INIT_TEXT_SECTION(PAGE_SIZE)
 	INIT_DATA_SECTION(16)
-	PERCPU(PAGE_SIZE)
+	PERCPU(L1_CACHE_BYTES, PAGE_SIZE)
 	__init_end = .;
 
 	_stext = .;
@@ -45,10 +46,10 @@ SECTIONS
 
 	_sdata = .;
 	RO_DATA_SECTION(PAGE_SIZE)
-	RW_DATA_SECTION(32, PAGE_SIZE, THREAD_SIZE)
+	RW_DATA_SECTION(L1_CACHE_BYTES, PAGE_SIZE, THREAD_SIZE)
 	_edata = .;
 
-	EXCEPTION_TABLE(32)
+	EXCEPTION_TABLE(L1_CACHE_BYTES)
 	NOTES
 
 	BSS_SECTION(0, 0, 0)
-- 
cgit v0.10.2


From 0bfdc8e121fd61adbc03848af3ca15fcbef2d1d8 Mon Sep 17 00:00:00 2001
From: Guan Xuetao <gxt@mprc.pku.edu.cn>
Date: Tue, 29 Mar 2011 22:17:42 +0800
Subject: unicore32 fix: remove arch-specific futex support

The futex functions in unicore32 are not used and verified,
so just replaced by asm-generic version.

Signed-off-by: Guan Xuetao <gxt@mprc.pku.edu.cn>
Acked-by: Arnd Bergmann <arnd@arndb.de>

diff --git a/arch/unicore32/Makefile b/arch/unicore32/Makefile
index e08d6d3..76a8bee 100644
--- a/arch/unicore32/Makefile
+++ b/arch/unicore32/Makefile
@@ -48,7 +48,7 @@ ASM_GENERIC_HEADERS	+= bitsperlong.h bug.h bugs.h
 ASM_GENERIC_HEADERS	+= cputime.h current.h
 ASM_GENERIC_HEADERS	+= device.h div64.h
 ASM_GENERIC_HEADERS	+= emergency-restart.h errno.h
-ASM_GENERIC_HEADERS	+= fb.h fcntl.h ftrace.h
+ASM_GENERIC_HEADERS	+= fb.h fcntl.h ftrace.h futex.h
 ASM_GENERIC_HEADERS	+= hardirq.h hw_irq.h
 ASM_GENERIC_HEADERS	+= ioctl.h ioctls.h ipcbuf.h irq_regs.h
 ASM_GENERIC_HEADERS	+= kdebug.h kmap_types.h
diff --git a/arch/unicore32/include/asm/futex.h b/arch/unicore32/include/asm/futex.h
deleted file mode 100644
index 07dea61..0000000
--- a/arch/unicore32/include/asm/futex.h
+++ /dev/null
@@ -1,143 +0,0 @@
-/*
- * linux/arch/unicore32/include/asm/futex.h
- *
- * Code specific to PKUnity SoC and UniCore ISA
- *
- * Copyright (C) 2001-2010 GUAN Xue-tao
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __UNICORE_FUTEX_H__
-#define __UNICORE_FUTEX_H__
-
-#ifdef __KERNEL__
-
-#include <linux/futex.h>
-#include <linux/preempt.h>
-#include <linux/uaccess.h>
-#include <linux/errno.h>
-
-#define __futex_atomic_op(insn, ret, oldval, uaddr, oparg)	\
-	__asm__ __volatile__(					\
-	"1:	ldw.u	%1, [%2]\n"				\
-	"	" insn "\n"					\
-	"2:	stw.u	%0, [%2]\n"				\
-	"	mov	%0, #0\n"				\
-	"3:\n"							\
-	"	.pushsection __ex_table,\"a\"\n"		\
-	"	.align	3\n"					\
-	"	.long	1b, 4f, 2b, 4f\n"			\
-	"	.popsection\n"					\
-	"	.pushsection .fixup,\"ax\"\n"			\
-	"4:	mov	%0, %4\n"				\
-	"	b	3b\n"					\
-	"	.popsection"					\
-	: "=&r" (ret), "=&r" (oldval)				\
-	: "r" (uaddr), "r" (oparg), "Ir" (-EFAULT)		\
-	: "cc", "memory")
-
-static inline int
-futex_atomic_op_inuser(int encoded_op, int __user *uaddr)
-{
-	int op = (encoded_op >> 28) & 7;
-	int cmp = (encoded_op >> 24) & 15;
-	int oparg = (encoded_op << 8) >> 20;
-	int cmparg = (encoded_op << 20) >> 20;
-	int oldval = 0, ret;
-
-	if (encoded_op & (FUTEX_OP_OPARG_SHIFT << 28))
-		oparg = 1 << oparg;
-
-	if (!access_ok(VERIFY_WRITE, uaddr, sizeof(int)))
-		return -EFAULT;
-
-	pagefault_disable();	/* implies preempt_disable() */
-
-	switch (op) {
-	case FUTEX_OP_SET:
-		__futex_atomic_op("mov	%0, %3", ret, oldval, uaddr, oparg);
-		break;
-	case FUTEX_OP_ADD:
-		__futex_atomic_op("add	%0, %1, %3", ret, oldval, uaddr, oparg);
-		break;
-	case FUTEX_OP_OR:
-		__futex_atomic_op("or	%0, %1, %3", ret, oldval, uaddr, oparg);
-		break;
-	case FUTEX_OP_ANDN:
-		__futex_atomic_op("and	%0, %1, %3",
-				ret, oldval, uaddr, ~oparg);
-		break;
-	case FUTEX_OP_XOR:
-		__futex_atomic_op("xor	%0, %1, %3", ret, oldval, uaddr, oparg);
-		break;
-	default:
-		ret = -ENOSYS;
-	}
-
-	pagefault_enable();	/* subsumes preempt_enable() */
-
-	if (!ret) {
-		switch (cmp) {
-		case FUTEX_OP_CMP_EQ:
-			ret = (oldval == cmparg);
-			break;
-		case FUTEX_OP_CMP_NE:
-			ret = (oldval != cmparg);
-			break;
-		case FUTEX_OP_CMP_LT:
-			ret = (oldval <  cmparg);
-			break;
-		case FUTEX_OP_CMP_GE:
-			ret = (oldval >= cmparg);
-			break;
-		case FUTEX_OP_CMP_LE:
-			ret = (oldval <= cmparg);
-			break;
-		case FUTEX_OP_CMP_GT:
-			ret = (oldval >  cmparg);
-			break;
-		default:
-			ret = -ENOSYS;
-		}
-	}
-	return ret;
-}
-
-static inline int
-futex_atomic_cmpxchg_inatomic(int __user *uaddr, int oldval, int newval)
-{
-	int val;
-
-	if (!access_ok(VERIFY_WRITE, uaddr, sizeof(int)))
-		return -EFAULT;
-
-	pagefault_disable();	/* implies preempt_disable() */
-
-	__asm__ __volatile__("@futex_atomic_cmpxchg_inatomic\n"
-	"1:	ldw.u	%0, [%3]\n"
-	"	cmpxor.a	%0, %1\n"
-	"	bne	3f\n"
-	"2:	stw.u	%2, [%3]\n"
-	"3:\n"
-	"	.pushsection __ex_table,\"a\"\n"
-	"	.align	3\n"
-	"	.long	1b, 4f, 2b, 4f\n"
-	"	.popsection\n"
-	"	.pushsection .fixup,\"ax\"\n"
-	"4:	mov	%0, %4\n"
-	"	b	3b\n"
-	"	.popsection"
-	: "=&r" (val)
-	: "r" (oldval), "r" (newval), "r" (uaddr), "Ir" (-EFAULT)
-	: "cc", "memory");
-
-	pagefault_enable();	/* subsumes preempt_enable() */
-
-	return val;
-}
-
-#endif /* __KERNEL__ */
-#endif /* __UNICORE_FUTEX_H__ */
-- 
cgit v0.10.2


From 858e4f4ba14441c2d43eed55dcd660c09bae38df Mon Sep 17 00:00:00 2001
From: Guan Xuetao <gxt@mprc.pku.edu.cn>
Date: Tue, 29 Mar 2011 20:38:51 +0800
Subject: unicore32 rtc driver fix: cleanup irq_set_freq and irq_set_state

Signed-off-by: Guan Xuetao <gxt@mprc.pku.edu.cn>

diff --git a/arch/unicore32/kernel/rtc.c b/arch/unicore32/kernel/rtc.c
index c5f0682..8cad70b 100644
--- a/arch/unicore32/kernel/rtc.c
+++ b/arch/unicore32/kernel/rtc.c
@@ -88,11 +88,6 @@ static int puv3_rtc_setpie(struct device *dev, int enabled)
 	return 0;
 }
 
-static int puv3_rtc_setfreq(struct device *dev, int freq)
-{
-	return 0;
-}
-
 /* Time read/write */
 
 static int puv3_rtc_gettime(struct device *dev, struct rtc_time *rtc_tm)
@@ -214,8 +209,6 @@ static const struct rtc_class_ops puv3_rtcops = {
 	.set_time	= puv3_rtc_settime,
 	.read_alarm	= puv3_rtc_getalarm,
 	.set_alarm	= puv3_rtc_setalarm,
-	.irq_set_freq	= puv3_rtc_setfreq,
-	.irq_set_state	= puv3_rtc_setpie,
 	.proc	        = puv3_rtc_proc,
 };
 
@@ -294,8 +287,6 @@ static int puv3_rtc_probe(struct platform_device *pdev)
 
 	puv3_rtc_enable(pdev, 1);
 
-	puv3_rtc_setfreq(&pdev->dev, 1);
-
 	/* register RTC and exit */
 
 	rtc = rtc_device_register("pkunity", &pdev->dev, &puv3_rtcops,
-- 
cgit v0.10.2


From 28e58cc9586ab3f4dbc79c55110955ad192e4c29 Mon Sep 17 00:00:00 2001
From: Huang Weiyi <weiyi.huang@gmail.com>
Date: Sun, 20 Mar 2011 16:56:55 +0800
Subject: unicore32 core architecture: remove duplicated #include

Remove duplicated #include('s) in
  arch/unicore32/kernel/traps.c

Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com>
Acked-by: Guan Xuetao <gxt@mprc.pku.edu.cn>

diff --git a/arch/unicore32/kernel/traps.c b/arch/unicore32/kernel/traps.c
index 25abbb1..254e36f 100644
--- a/arch/unicore32/kernel/traps.c
+++ b/arch/unicore32/kernel/traps.c
@@ -22,7 +22,6 @@
 #include <linux/delay.h>
 #include <linux/hardirq.h>
 #include <linux/init.h>
-#include <linux/uaccess.h>
 #include <linux/atomic.h>
 #include <linux/unistd.h>
 
-- 
cgit v0.10.2


From 6b794743b2c5e21825d35b5d5dd57d6fcc388198 Mon Sep 17 00:00:00 2001
From: Guan Xuetao <gxt@mprc.pku.edu.cn>
Date: Fri, 1 Apr 2011 16:38:59 +0800
Subject: unicore32 framebuffer fix: get videomemory by __get_free_pages() and
 make it floatable

1. get videomemory by __get_free_pages() in fb-puv3.c
2. remove resource reservation for old fixed UNIGFX_MMAP & UVC_MMAP space
3. remove unused macros: PKUNTIY_UNIGFX_MMAP_BASE, PKUNITY_UNIGFX_MMAP_SIZE,
	PKUNITY_UVC_MMAP_BASE, PKUNITY_UVC_MMAP_SIZE and KUSER_UNIGFX_BASE
4. remove unused header linux/vmalloc.h in fb-puv3.h

Signed-off-by: Guan Xuetao <gxt@mprc.pku.edu.cn>
Acked-by: Arnd Bergmann <arnd@arndb.de>

diff --git a/arch/unicore32/include/mach/PKUnity.h b/arch/unicore32/include/mach/PKUnity.h
index a18bdc3..8040d57 100644
--- a/arch/unicore32/include/mach/PKUnity.h
+++ b/arch/unicore32/include/mach/PKUnity.h
@@ -24,16 +24,6 @@
 #define PKUNITY_MMIO_BASE		0x80000000 /* 0x80000000 - 0xFFFFFFFF 2GB */
 
 /*
- * PKUNITY Memory Map Addresses: 0x0D000000 - 0x0EFFFFFF (32MB)
- *	0x0D000000 - 0x0DFFFFFF 16MB: for UVC
- *	0x0E000000 - 0x0EFFFFFF 16MB: for UNIGFX
- */
-#define PKUNITY_UVC_MMAP_BASE		0x0D000000
-#define PKUNITY_UVC_MMAP_SIZE		0x01000000 /* 16MB */
-#define PKUNITY_UNIGFX_MMAP_BASE        0x0E000000
-#define PKUNITY_UNIGFX_MMAP_SIZE        0x01000000 /* 16MB */
-
-/*
  * PKUNITY System Bus Addresses (PCI): 0x80000000 - 0xBFFFFFFF (1GB)
  * 0x80000000 - 0x8000000B 12B    PCI Configuration regs
  * 0x80010000 - 0x80010250 592B   PCI Bridge Base
diff --git a/arch/unicore32/include/mach/memory.h b/arch/unicore32/include/mach/memory.h
index 0bf21c9..4be72c2 100644
--- a/arch/unicore32/include/mach/memory.h
+++ b/arch/unicore32/include/mach/memory.h
@@ -50,7 +50,6 @@ void puv3_pci_adjust_zones(unsigned long *size, unsigned long *holes);
 
 /* kuser area */
 #define KUSER_VECPAGE_BASE	(KUSER_BASE + UL(0x3fff0000))
-#define KUSER_UNIGFX_BASE	(PAGE_OFFSET + PKUNITY_UNIGFX_MMAP_BASE)
 /* kuser_vecpage (0xbfff0000) is ro, and vectors page (0xffff0000) is rw */
 #define kuser_vecpage_to_vectors(x)	((x) - (KUSER_VECPAGE_BASE)	\
 					+ (VECTORS_BASE))
diff --git a/arch/unicore32/kernel/puv3-core.c b/arch/unicore32/kernel/puv3-core.c
index 8b1b6be..1a505a7 100644
--- a/arch/unicore32/kernel/puv3-core.c
+++ b/arch/unicore32/kernel/puv3-core.c
@@ -99,11 +99,6 @@ static struct resource puv3_unigfx_resources[] = {
 		.end	= io_v2p(PKUNITY_UNIGFX_BASE) + 0xfff,
 		.flags	= IORESOURCE_MEM,
 	},
-	[1] = {
-		.start	= PKUNITY_UNIGFX_MMAP_BASE,
-		.end	= PKUNITY_UNIGFX_MMAP_BASE + PKUNITY_UNIGFX_MMAP_SIZE,
-		.flags	= IORESOURCE_MEM,
-	},
 };
 
 static struct resource puv3_rtc_resources[] = {
diff --git a/arch/unicore32/kernel/setup.c b/arch/unicore32/kernel/setup.c
index 1e175a8..471b6bc 100644
--- a/arch/unicore32/kernel/setup.c
+++ b/arch/unicore32/kernel/setup.c
@@ -64,12 +64,6 @@ static char default_command_line[COMMAND_LINE_SIZE] __initdata = CONFIG_CMDLINE;
  */
 static struct resource mem_res[] = {
 	{
-		.name = "Video RAM",
-		.start = 0,
-		.end = 0,
-		.flags = IORESOURCE_MEM
-	},
-	{
 		.name = "Kernel text",
 		.start = 0,
 		.end = 0,
@@ -83,9 +77,8 @@ static struct resource mem_res[] = {
 	}
 };
 
-#define video_ram   mem_res[0]
-#define kernel_code mem_res[1]
-#define kernel_data mem_res[2]
+#define kernel_code mem_res[0]
+#define kernel_data mem_res[1]
 
 /*
  * These functions re-use the assembly code in head.S, which
@@ -224,10 +217,6 @@ request_standard_resources(struct meminfo *mi)
 		    kernel_data.end <= res->end)
 			request_resource(res, &kernel_data);
 	}
-
-	video_ram.start = PKUNITY_UNIGFX_MMAP_BASE;
-	video_ram.end   = PKUNITY_UNIGFX_MMAP_BASE + PKUNITY_UNIGFX_MMAP_SIZE;
-	request_resource(&iomem_resource, &video_ram);
 }
 
 static void (*init_machine)(void) __initdata;
diff --git a/arch/unicore32/mm/mmu.c b/arch/unicore32/mm/mmu.c
index 7bf3d58..db2d334 100644
--- a/arch/unicore32/mm/mmu.c
+++ b/arch/unicore32/mm/mmu.c
@@ -338,15 +338,6 @@ void __init uc32_mm_memblock_reserve(void)
 	 * and can only be in node 0.
 	 */
 	memblock_reserve(__pa(swapper_pg_dir), PTRS_PER_PGD * sizeof(pgd_t));
-
-#ifdef CONFIG_PUV3_UNIGFX
-	/*
-	 * These should likewise go elsewhere.  They pre-reserve the
-	 * screen/video memory region at the 48M~64M of main system memory.
-	 */
-	memblock_reserve(PKUNITY_UNIGFX_MMAP_BASE, PKUNITY_UNIGFX_MMAP_SIZE);
-	memblock_reserve(PKUNITY_UVC_MMAP_BASE, PKUNITY_UVC_MMAP_SIZE);
-#endif
 }
 
 /*
@@ -371,17 +362,6 @@ static void __init devicemaps_init(void)
 		pmd_clear(pmd_off_k(addr));
 
 	/*
-	 * Create a mapping for UniGFX VRAM
-	 */
-#ifdef CONFIG_PUV3_UNIGFX
-	map.pfn = __phys_to_pfn(PKUNITY_UNIGFX_MMAP_BASE);
-	map.virtual = KUSER_UNIGFX_BASE;
-	map.length = PKUNITY_UNIGFX_MMAP_SIZE;
-	map.type = MT_KUSER;
-	create_mapping(&map);
-#endif
-
-	/*
 	 * Create a mapping for the machine vectors at the high-vectors
 	 * location (0xffff0000).  If we aren't using high-vectors, also
 	 * create a mapping at the low-vectors virtual address.
diff --git a/drivers/video/fb-puv3.c b/drivers/video/fb-puv3.c
index dbd2dc4..27f2c57 100644
--- a/drivers/video/fb-puv3.c
+++ b/drivers/video/fb-puv3.c
@@ -13,7 +13,6 @@
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/errno.h>
-#include <linux/vmalloc.h>
 #include <linux/platform_device.h>
 #include <linux/clk.h>
 #include <linux/fb.h>
@@ -531,7 +530,7 @@ static int unifb_set_par(struct fb_info *info)
 		return -EINVAL;
 	}
 
-	writel(PKUNITY_UNIGFX_MMAP_BASE, UDE_FSA);
+	writel(info->fix.smem_start, UDE_FSA);
 	writel(info->var.yres, UDE_LS);
 	writel(get_line_length(info->var.xres,
 			info->var.bits_per_pixel) >> 3, UDE_PS);
@@ -680,13 +679,27 @@ static int unifb_probe(struct platform_device *dev)
 	struct fb_info *info;
 	u32 unifb_regs[UNIFB_REGS_NUM];
 	int retval = -ENOMEM;
-	struct resource *iomem, *mapmem;
+	struct resource *iomem;
+	void *videomemory;
+
+	videomemory = (void *)__get_free_pages(GFP_KERNEL | __GFP_COMP,
+				get_order(UNIFB_MEMSIZE));
+	if (!videomemory)
+		goto err;
+
+	memset(videomemory, 0, UNIFB_MEMSIZE);
+
+	unifb_fix.smem_start = virt_to_phys(videomemory);
+	unifb_fix.smem_len = UNIFB_MEMSIZE;
+
+	iomem = platform_get_resource(dev, IORESOURCE_MEM, 0);
+	unifb_fix.mmio_start = iomem->start;
 
 	info = framebuffer_alloc(sizeof(u32)*256, &dev->dev);
 	if (!info)
 		goto err;
 
-	info->screen_base = (char __iomem *)KUSER_UNIGFX_BASE;
+	info->screen_base = (char __iomem *)videomemory;
 	info->fbops = &unifb_ops;
 
 	retval = fb_find_mode(&info->var, info, NULL,
@@ -695,13 +708,6 @@ static int unifb_probe(struct platform_device *dev)
 	if (!retval || (retval == 4))
 		info->var = unifb_default;
 
-	iomem = platform_get_resource(dev, IORESOURCE_MEM, 0);
-	unifb_fix.mmio_start = iomem->start;
-
-	mapmem = platform_get_resource(dev, IORESOURCE_MEM, 1);
-	unifb_fix.smem_start = mapmem->start;
-	unifb_fix.smem_len = UNIFB_MEMSIZE;
-
 	info->fix = unifb_fix;
 	info->pseudo_palette = info->par;
 	info->par = NULL;
-- 
cgit v0.10.2


From e28e1d93e9591d21e440f5210a9b4317c59445df Mon Sep 17 00:00:00 2001
From: Axel Lin <axel.lin@gmail.com>
Date: Sat, 2 Apr 2011 21:20:24 -0700
Subject: Input: rpckbd - fix a leak of the IRQ during init failure

In rpckbd_open prror path, free_irq() was using NULL rather than the
driver data as the data pointer so free_irq() wouldn't have matched.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

diff --git a/drivers/input/serio/rpckbd.c b/drivers/input/serio/rpckbd.c
index 9da6fbc..7ec3c97 100644
--- a/drivers/input/serio/rpckbd.c
+++ b/drivers/input/serio/rpckbd.c
@@ -90,7 +90,7 @@ static int rpckbd_open(struct serio *port)
 
 	if (request_irq(IRQ_KEYBOARDTX, rpckbd_tx, 0, "rpckbd", port) != 0) {
 		printk(KERN_ERR "rpckbd.c: Could not allocate keyboard transmit IRQ\n");
-		free_irq(IRQ_KEYBOARDRX, NULL);
+		free_irq(IRQ_KEYBOARDRX, port);
 		return -EBUSY;
 	}
 
-- 
cgit v0.10.2


From beb47274116b36e17cf52869a2004e7d12a4ef1d Mon Sep 17 00:00:00 2001
From: Alex Deucher <alexdeucher@gmail.com>
Date: Sat, 2 Apr 2011 09:09:08 -0400
Subject: drm/radeon/kms: Add support for tv-out dongle on G5 9600

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

diff --git a/drivers/gpu/drm/radeon/radeon_combios.c b/drivers/gpu/drm/radeon/radeon_combios.c
index cf602e2..8caf546 100644
--- a/drivers/gpu/drm/radeon/radeon_combios.c
+++ b/drivers/gpu/drm/radeon/radeon_combios.c
@@ -2079,6 +2079,19 @@ bool radeon_get_legacy_connector_info_from_table(struct drm_device *dev)
 					    DRM_MODE_CONNECTOR_DVII, &ddc_i2c,
 					    CONNECTOR_OBJECT_ID_SINGLE_LINK_DVI_I,
 					    &hpd);
+		/* TV - TV DAC */
+		ddc_i2c.valid = false;
+		hpd.hpd = RADEON_HPD_NONE;
+		radeon_add_legacy_encoder(dev,
+					  radeon_get_encoder_enum(dev,
+								ATOM_DEVICE_TV1_SUPPORT,
+								2),
+					  ATOM_DEVICE_TV1_SUPPORT);
+		radeon_add_legacy_connector(dev, 2, ATOM_DEVICE_TV1_SUPPORT,
+					    DRM_MODE_CONNECTOR_SVIDEO,
+					    &ddc_i2c,
+					    CONNECTOR_OBJECT_ID_SVIDEO,
+					    &hpd);
 		break;
 	default:
 		DRM_INFO("Connector table: %d (invalid)\n",
-- 
cgit v0.10.2


From fb9674bd2cd3c18f6c756ee123967e43be501263 Mon Sep 17 00:00:00 2001
From: Alex Deucher <alexdeucher@gmail.com>
Date: Sat, 2 Apr 2011 09:15:50 -0400
Subject: drm/radeon/kms: pageflipping cleanup for avivo+

Avoid touching the flip setup regs while
acceleration is running.  Set them at modeset
rather than during pageflip.  Touching these
regs while acceleration is active caused hangs
on pre-avivo chips.  These chips do not seem
to be affected, but better safe than sorry,
plus it avoids repeatedly reprogramming the
regs every flip.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

diff --git a/drivers/gpu/drm/radeon/atombios_crtc.c b/drivers/gpu/drm/radeon/atombios_crtc.c
index 10e41af..b41ec59 100644
--- a/drivers/gpu/drm/radeon/atombios_crtc.c
+++ b/drivers/gpu/drm/radeon/atombios_crtc.c
@@ -1009,6 +1009,7 @@ static int dce4_crtc_do_set_base(struct drm_crtc *crtc,
 	uint64_t fb_location;
 	uint32_t fb_format, fb_pitch_pixels, tiling_flags;
 	u32 fb_swap = EVERGREEN_GRPH_ENDIAN_SWAP(EVERGREEN_GRPH_ENDIAN_NONE);
+	u32 tmp;
 	int r;
 
 	/* no fb bound */
@@ -1137,6 +1138,15 @@ static int dce4_crtc_do_set_base(struct drm_crtc *crtc,
 	WREG32(EVERGREEN_VIEWPORT_SIZE + radeon_crtc->crtc_offset,
 	       (crtc->mode.hdisplay << 16) | crtc->mode.vdisplay);
 
+	/* pageflip setup */
+	/* make sure flip is at vb rather than hb */
+	tmp = RREG32(EVERGREEN_GRPH_FLIP_CONTROL + radeon_crtc->crtc_offset);
+	tmp &= ~EVERGREEN_GRPH_SURFACE_UPDATE_H_RETRACE_EN;
+	WREG32(EVERGREEN_GRPH_FLIP_CONTROL + radeon_crtc->crtc_offset, tmp);
+
+	/* set pageflip to happen anywhere in vblank interval */
+	WREG32(EVERGREEN_MASTER_UPDATE_MODE + radeon_crtc->crtc_offset, 0);
+
 	if (!atomic && fb && fb != crtc->fb) {
 		radeon_fb = to_radeon_framebuffer(fb);
 		rbo = gem_to_radeon_bo(radeon_fb->obj);
@@ -1167,6 +1177,7 @@ static int avivo_crtc_do_set_base(struct drm_crtc *crtc,
 	uint64_t fb_location;
 	uint32_t fb_format, fb_pitch_pixels, tiling_flags;
 	u32 fb_swap = R600_D1GRPH_SWAP_ENDIAN_NONE;
+	u32 tmp;
 	int r;
 
 	/* no fb bound */
@@ -1294,6 +1305,15 @@ static int avivo_crtc_do_set_base(struct drm_crtc *crtc,
 	WREG32(AVIVO_D1MODE_VIEWPORT_SIZE + radeon_crtc->crtc_offset,
 	       (crtc->mode.hdisplay << 16) | crtc->mode.vdisplay);
 
+	/* pageflip setup */
+	/* make sure flip is at vb rather than hb */
+	tmp = RREG32(AVIVO_D1GRPH_FLIP_CONTROL + radeon_crtc->crtc_offset);
+	tmp &= ~AVIVO_D1GRPH_SURFACE_UPDATE_H_RETRACE_EN;
+	WREG32(AVIVO_D1GRPH_FLIP_CONTROL + radeon_crtc->crtc_offset, tmp);
+
+	/* set pageflip to happen anywhere in vblank interval */
+	WREG32(AVIVO_D1MODE_MASTER_UPDATE_MODE + radeon_crtc->crtc_offset, 0);
+
 	if (!atomic && fb && fb != crtc->fb) {
 		radeon_fb = to_radeon_framebuffer(fb);
 		rbo = gem_to_radeon_bo(radeon_fb->obj);
diff --git a/drivers/gpu/drm/radeon/evergreen.c b/drivers/gpu/drm/radeon/evergreen.c
index 941080a..0b0cc74 100644
--- a/drivers/gpu/drm/radeon/evergreen.c
+++ b/drivers/gpu/drm/radeon/evergreen.c
@@ -43,17 +43,6 @@ static void evergreen_pcie_gen2_enable(struct radeon_device *rdev);
 
 void evergreen_pre_page_flip(struct radeon_device *rdev, int crtc)
 {
-	struct radeon_crtc *radeon_crtc = rdev->mode_info.crtcs[crtc];
-	u32 tmp;
-
-	/* make sure flip is at vb rather than hb */
-	tmp = RREG32(EVERGREEN_GRPH_FLIP_CONTROL + radeon_crtc->crtc_offset);
-	tmp &= ~EVERGREEN_GRPH_SURFACE_UPDATE_H_RETRACE_EN;
-	WREG32(EVERGREEN_GRPH_FLIP_CONTROL + radeon_crtc->crtc_offset, tmp);
-
-	/* set pageflip to happen anywhere in vblank interval */
-	WREG32(EVERGREEN_MASTER_UPDATE_MODE + radeon_crtc->crtc_offset, 0);
-
 	/* enable the pflip int */
 	radeon_irq_kms_pflip_irq_get(rdev, crtc);
 }
diff --git a/drivers/gpu/drm/radeon/rs600.c b/drivers/gpu/drm/radeon/rs600.c
index 19763f5..876cebc 100644
--- a/drivers/gpu/drm/radeon/rs600.c
+++ b/drivers/gpu/drm/radeon/rs600.c
@@ -48,17 +48,6 @@ int rs600_mc_wait_for_idle(struct radeon_device *rdev);
 
 void rs600_pre_page_flip(struct radeon_device *rdev, int crtc)
 {
-	struct radeon_crtc *radeon_crtc = rdev->mode_info.crtcs[crtc];
-	u32 tmp;
-
-	/* make sure flip is at vb rather than hb */
-	tmp = RREG32(AVIVO_D1GRPH_FLIP_CONTROL + radeon_crtc->crtc_offset);
-	tmp &= ~AVIVO_D1GRPH_SURFACE_UPDATE_H_RETRACE_EN;
-	WREG32(AVIVO_D1GRPH_FLIP_CONTROL + radeon_crtc->crtc_offset, tmp);
-
-	/* set pageflip to happen anywhere in vblank interval */
-	WREG32(AVIVO_D1MODE_MASTER_UPDATE_MODE + radeon_crtc->crtc_offset, 0);
-
 	/* enable the pflip int */
 	radeon_irq_kms_pflip_irq_get(rdev, crtc);
 }
-- 
cgit v0.10.2


From a14b289d4614bb3b25d0455d68f72f3c7b4cc8e8 Mon Sep 17 00:00:00 2001
From: Mariusz Kozlowski <mk@lab.zgora.pl>
Date: Sun, 3 Apr 2011 22:04:01 -0700
Subject: mlx4: fix kfree on error path in new_steering_entry()

On error path kfree() should get pointer to memory allocated by
kmalloc() not the address of variable holding it (which is on stack).

Signed-off-by: Mariusz Kozlowski <mk@lab.zgora.pl>
Signed-off-by: David S. Miller <davem@davemloft.net>

diff --git a/drivers/net/mlx4/mcg.c b/drivers/net/mlx4/mcg.c
index 37150b2..c6d336a 100644
--- a/drivers/net/mlx4/mcg.c
+++ b/drivers/net/mlx4/mcg.c
@@ -111,7 +111,7 @@ static int new_steering_entry(struct mlx4_dev *dev, u8 vep_num, u8 port,
 	u32 members_count;
 	struct mlx4_steer_index *new_entry;
 	struct mlx4_promisc_qp *pqp;
-	struct mlx4_promisc_qp *dqp;
+	struct mlx4_promisc_qp *dqp = NULL;
 	u32 prot;
 	int err;
 	u8 pf_num;
@@ -184,7 +184,7 @@ out_mailbox:
 out_alloc:
 	if (dqp) {
 		list_del(&dqp->list);
-		kfree(&dqp);
+		kfree(dqp);
 	}
 	list_del(&new_entry->list);
 	kfree(new_entry);
-- 
cgit v0.10.2


From d2f989262ee713b9a8a9a1baedc2445ed958d986 Mon Sep 17 00:00:00 2001
From: Prabhakar Kushwaha <prabhakar@freescale.com>
Date: Fri, 25 Mar 2011 10:17:45 +0530
Subject: powerpc/85xx: Update dts for PCIe memory maps to match u-boot of
 Px020RDB

PCIe memory address space is 1:1 mapped with u-boot.

Update dts of Px020RDB i.e. P1020RDB and P2020RDB to match the address map
changes in u-boot.

Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

diff --git a/arch/powerpc/boot/dts/p1020rdb.dts b/arch/powerpc/boot/dts/p1020rdb.dts
index 22f64b6..e0668f8 100644
--- a/arch/powerpc/boot/dts/p1020rdb.dts
+++ b/arch/powerpc/boot/dts/p1020rdb.dts
@@ -1,7 +1,7 @@
 /*
  * P1020 RDB Device Tree Source
  *
- * Copyright 2009 Freescale Semiconductor Inc.
+ * Copyright 2009-2011 Freescale Semiconductor Inc.
  *
  * This program is free software; you can redistribute  it and/or modify it
  * under  the terms of  the GNU General  Public License as published by the
@@ -553,7 +553,7 @@
 		reg = <0 0xffe09000 0 0x1000>;
 		bus-range = <0 255>;
 		ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000
-			  0x1000000 0x0 0x00000000 0 0xffc30000 0x0 0x10000>;
+			  0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>;
 		clock-frequency = <33333333>;
 		interrupt-parent = <&mpic>;
 		interrupts = <16 2>;
@@ -580,8 +580,8 @@
 		#address-cells = <3>;
 		reg = <0 0xffe0a000 0 0x1000>;
 		bus-range = <0 255>;
-		ranges = <0x2000000 0x0 0xc0000000 0 0xc0000000 0x0 0x20000000
-			  0x1000000 0x0 0x00000000 0 0xffc20000 0x0 0x10000>;
+		ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>;
 		clock-frequency = <33333333>;
 		interrupt-parent = <&mpic>;
 		interrupts = <16 2>;
@@ -590,8 +590,8 @@
 			#size-cells = <2>;
 			#address-cells = <3>;
 			device_type = "pci";
-			ranges = <0x2000000 0x0 0xc0000000
-				  0x2000000 0x0 0xc0000000
+			ranges = <0x2000000 0x0 0x80000000
+				  0x2000000 0x0 0x80000000
 				  0x0 0x20000000
 
 				  0x1000000 0x0 0x0
diff --git a/arch/powerpc/boot/dts/p2020rdb.dts b/arch/powerpc/boot/dts/p2020rdb.dts
index da4cb0d..e2d48fd 100644
--- a/arch/powerpc/boot/dts/p2020rdb.dts
+++ b/arch/powerpc/boot/dts/p2020rdb.dts
@@ -1,7 +1,7 @@
 /*
  * P2020 RDB Device Tree Source
  *
- * Copyright 2009 Freescale Semiconductor Inc.
+ * Copyright 2009-2011 Freescale Semiconductor Inc.
  *
  * This program is free software; you can redistribute  it and/or modify it
  * under  the terms of  the GNU General  Public License as published by the
@@ -537,7 +537,7 @@
 		reg = <0 0xffe09000 0 0x1000>;
 		bus-range = <0 255>;
 		ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000
-			  0x1000000 0x0 0x00000000 0 0xffc30000 0x0 0x10000>;
+			  0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>;
 		clock-frequency = <33333333>;
 		interrupt-parent = <&mpic>;
 		interrupts = <25 2>;
@@ -564,8 +564,8 @@
 		#address-cells = <3>;
 		reg = <0 0xffe0a000 0 0x1000>;
 		bus-range = <0 255>;
-		ranges = <0x2000000 0x0 0xc0000000 0 0xc0000000 0x0 0x20000000
-			  0x1000000 0x0 0x00000000 0 0xffc20000 0x0 0x10000>;
+		ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>;
 		clock-frequency = <33333333>;
 		interrupt-parent = <&mpic>;
 		interrupts = <26 2>;
@@ -574,8 +574,8 @@
 			#size-cells = <2>;
 			#address-cells = <3>;
 			device_type = "pci";
-			ranges = <0x2000000 0x0 0xc0000000
-				  0x2000000 0x0 0xc0000000
+			ranges = <0x2000000 0x0 0x80000000
+				  0x2000000 0x0 0x80000000
 				  0x0 0x20000000
 
 				  0x1000000 0x0 0x0
diff --git a/arch/powerpc/boot/dts/p2020rdb_camp_core0.dts b/arch/powerpc/boot/dts/p2020rdb_camp_core0.dts
index 0fe93d0..b69c3a5 100644
--- a/arch/powerpc/boot/dts/p2020rdb_camp_core0.dts
+++ b/arch/powerpc/boot/dts/p2020rdb_camp_core0.dts
@@ -6,7 +6,7 @@
  * This dts file allows core0 to have memory, l2, i2c, spi, gpio, dma1, usb,
  * eth1, eth2, sdhc, crypto, global-util, pci0.
  *
- * Copyright 2009 Freescale Semiconductor Inc.
+ * Copyright 2009-2011 Freescale Semiconductor Inc.
  *
  * This program is free software; you can redistribute  it and/or modify it
  * under  the terms of  the GNU General  Public License as published by the
@@ -342,7 +342,7 @@
 		reg = <0 0xffe09000 0 0x1000>;
 		bus-range = <0 255>;
 		ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000
-			  0x1000000 0x0 0x00000000 0 0xffc30000 0x0 0x10000>;
+			  0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>;
 		clock-frequency = <33333333>;
 		interrupt-parent = <&mpic>;
 		interrupts = <25 2>;
diff --git a/arch/powerpc/boot/dts/p2020rdb_camp_core1.dts b/arch/powerpc/boot/dts/p2020rdb_camp_core1.dts
index e95a512..7a31d46c 100644
--- a/arch/powerpc/boot/dts/p2020rdb_camp_core1.dts
+++ b/arch/powerpc/boot/dts/p2020rdb_camp_core1.dts
@@ -7,7 +7,7 @@
  *
  * Please note to add "-b 1" for core1's dts compiling.
  *
- * Copyright 2009 Freescale Semiconductor Inc.
+ * Copyright 2009-2011 Freescale Semiconductor Inc.
  *
  * This program is free software; you can redistribute  it and/or modify it
  * under  the terms of  the GNU General  Public License as published by the
@@ -162,8 +162,8 @@
 		#address-cells = <3>;
 		reg = <0 0xffe0a000 0 0x1000>;
 		bus-range = <0 255>;
-		ranges = <0x2000000 0x0 0xc0000000 0 0xc0000000 0x0 0x20000000
-			  0x1000000 0x0 0x00000000 0 0xffc20000 0x0 0x10000>;
+		ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>;
 		clock-frequency = <33333333>;
 		interrupt-parent = <&mpic>;
 		interrupts = <26 2>;
@@ -172,8 +172,8 @@
 			#size-cells = <2>;
 			#address-cells = <3>;
 			device_type = "pci";
-			ranges = <0x2000000 0x0 0xc0000000
-				  0x2000000 0x0 0xc0000000
+			ranges = <0x2000000 0x0 0x80000000
+				  0x2000000 0x0 0x80000000
 				  0x0 0x20000000
 
 				  0x1000000 0x0 0x0
-- 
cgit v0.10.2


From a94d7b35067ab403485a1ea06b7a3d0172d1a1ba Mon Sep 17 00:00:00 2001
From: Kumar Gala <galak@kernel.crashing.org>
Date: Thu, 31 Mar 2011 17:11:39 -0500
Subject: edac/mpc85xx: Limit setting/clearing of HID1[RFXE] to e500v1/v2 cores

Only the e500v1/v2 cores have HID1[RXFE] so we should attempt to set or
clear this register bit on them.  Otherwise we get crashes like:

NIP: c0579f84 LR: c006d550 CTR: c0579f84
REGS: ef857ec0 TRAP: 0700   Not tainted  (2.6.38.2-00072-gf15ba3c)
MSR: 00021002 <ME,CE>  CR: 22044022  XER: 00000000
TASK = ef8559c0[1] 'swapper' THREAD: ef856000 CPU: 0
GPR00: c006d538 ef857f70 ef8559c0 00000000 00000004 00000000 00000000 00000000
GPR08: c0590000 c30170a8 00000000 c30170a8 00000001 0fffe000 00000000 00000000
GPR16: 00000000 7ffa0e60 00000000 00000000 7ffb0bd8 7ff3b844 c05be000 00000000
GPR24: 00000000 00000000 c05c28b0 c0579fac 00000000 00029002 00000000 c0579f84
NIP [c0579f84] mpc85xx_mc_clear_rfxe+0x0/0x28
LR [c006d550] on_each_cpu+0x34/0x50
Call Trace:
[ef857f70] [c006d538] on_each_cpu+0x1c/0x50 (unreliable)
[ef857f90] [c057a070] mpc85xx_mc_init+0xc4/0xdc
[ef857fa0] [c0001cd4] do_one_initcall+0x34/0x1a8
[ef857fd0] [c055d9d8] kernel_init+0x17c/0x218
[ef857ff0] [c000cda4] kernel_thread+0x4c/0x68
Instruction dump:
40be0018 3c60c052 3863c70c 4be9baad 3be0ffed 4bd7c99d 80010014 7fe3fb78
83e1000c 38210010 7c0803a6 4e800020 <7c11faa6> 54290024 81290008
3d60c06e
Oops: Exception in kernel mode, sig: 4 [#2]
---[ end trace 49ff3b8f93efde1a ]---

Also use the HID1_RFXE define rather than a magic number.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

diff --git a/drivers/edac/mpc85xx_edac.c b/drivers/edac/mpc85xx_edac.c
index ffb5ad0..38ab8e2 100644
--- a/drivers/edac/mpc85xx_edac.c
+++ b/drivers/edac/mpc85xx_edac.c
@@ -1147,13 +1147,14 @@ static struct platform_driver mpc85xx_mc_err_driver = {
 static void __init mpc85xx_mc_clear_rfxe(void *data)
 {
 	orig_hid1[smp_processor_id()] = mfspr(SPRN_HID1);
-	mtspr(SPRN_HID1, (orig_hid1[smp_processor_id()] & ~0x20000));
+	mtspr(SPRN_HID1, (orig_hid1[smp_processor_id()] & ~HID1_RFXE));
 }
 #endif
 
 static int __init mpc85xx_mc_init(void)
 {
 	int res = 0;
+	u32 pvr = 0;
 
 	printk(KERN_INFO "Freescale(R) MPC85xx EDAC driver, "
 	       "(C) 2006 Montavista Software\n");
@@ -1183,12 +1184,17 @@ static int __init mpc85xx_mc_init(void)
 #endif
 
 #ifdef CONFIG_FSL_SOC_BOOKE
-	/*
-	 * need to clear HID1[RFXE] to disable machine check int
-	 * so we can catch it
-	 */
-	if (edac_op_state == EDAC_OPSTATE_INT)
-		on_each_cpu(mpc85xx_mc_clear_rfxe, NULL, 0);
+	pvr = mfspr(SPRN_PVR);
+
+	if ((PVR_VER(pvr) == PVR_VER_E500V1) ||
+	    (PVR_VER(pvr) == PVR_VER_E500V2)) {
+		/*
+		 * need to clear HID1[RFXE] to disable machine check int
+		 * so we can catch it
+		 */
+		if (edac_op_state == EDAC_OPSTATE_INT)
+			on_each_cpu(mpc85xx_mc_clear_rfxe, NULL, 0);
+	}
 #endif
 
 	return 0;
@@ -1206,7 +1212,12 @@ static void __exit mpc85xx_mc_restore_hid1(void *data)
 static void __exit mpc85xx_mc_exit(void)
 {
 #ifdef CONFIG_FSL_SOC_BOOKE
-	on_each_cpu(mpc85xx_mc_restore_hid1, NULL, 0);
+	u32 pvr = mfspr(SPRN_PVR);
+
+	if ((PVR_VER(pvr) == PVR_VER_E500V1) ||
+	    (PVR_VER(pvr) == PVR_VER_E500V2)) {
+		on_each_cpu(mpc85xx_mc_restore_hid1, NULL, 0);
+	}
 #endif
 #ifdef CONFIG_PCI
 	platform_driver_unregister(&mpc85xx_pci_err_driver);
-- 
cgit v0.10.2


From b3b896c73b4b04b506816a09994192e3a54f0fef Mon Sep 17 00:00:00 2001
From: Major Lee <major_lee@wistron.com>
Date: Mon, 4 Apr 2011 11:32:12 +0100
Subject: rtc-mrst: Fix section types

Fix the following section mismatch warning.

  WARNING: drivers/rtc/built-in.o(.data+0xa0): Section mismatch in reference from the variable vrtc_mrst_platform_driver to the function .init.text:vrtc_mrst_platform_probe()
  The variable vrtc_mrst_platform_driver references the function __init vrtc_mrst_platform_probe()
  If the reference is valid then annotate the variable with __init* or __refdata (see linux/init.h) or name the variable:
    *_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console,

Signed-off-by: Major Lee <major_lee@wistron.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

diff --git a/drivers/rtc/rtc-mrst.c b/drivers/rtc/rtc-mrst.c
index b86bc32..332a2c4 100644
--- a/drivers/rtc/rtc-mrst.c
+++ b/drivers/rtc/rtc-mrst.c
@@ -319,7 +319,7 @@ static irqreturn_t mrst_rtc_irq(int irq, void *p)
 	return IRQ_NONE;
 }
 
-static int __init
+static int __devinit
 vrtc_mrst_do_probe(struct device *dev, struct resource *iomem, int rtc_irq)
 {
 	int retval = 0;
@@ -391,7 +391,7 @@ static void rtc_mrst_do_shutdown(void)
 	spin_unlock_irq(&rtc_lock);
 }
 
-static void __exit rtc_mrst_do_remove(struct device *dev)
+static void __devexit rtc_mrst_do_remove(struct device *dev)
 {
 	struct mrst_rtc	*mrst = dev_get_drvdata(dev);
 	struct resource *iomem;
@@ -500,14 +500,14 @@ static inline int mrst_poweroff(struct device *dev)
 
 #endif
 
-static int __init vrtc_mrst_platform_probe(struct platform_device *pdev)
+static int __devinit vrtc_mrst_platform_probe(struct platform_device *pdev)
 {
 	return vrtc_mrst_do_probe(&pdev->dev,
 			platform_get_resource(pdev, IORESOURCE_MEM, 0),
 			platform_get_irq(pdev, 0));
 }
 
-static int __exit vrtc_mrst_platform_remove(struct platform_device *pdev)
+static int __devexit vrtc_mrst_platform_remove(struct platform_device *pdev)
 {
 	rtc_mrst_do_remove(&pdev->dev);
 	return 0;
@@ -525,7 +525,7 @@ MODULE_ALIAS("platform:vrtc_mrst");
 
 static struct platform_driver vrtc_mrst_platform_driver = {
 	.probe		= vrtc_mrst_platform_probe,
-	.remove		= __exit_p(vrtc_mrst_platform_remove),
+	.remove		= __devexit_p(vrtc_mrst_platform_remove),
 	.shutdown	= vrtc_mrst_platform_shutdown,
 	.driver = {
 		.name		= (char *) driver_name,
-- 
cgit v0.10.2


From 4352d9d44b935e4d000be6ec89ddb55c2bf35f24 Mon Sep 17 00:00:00 2001
From: Richard Cochran <richardcochran@gmail.com>
Date: Mon, 4 Apr 2011 08:31:23 -0700
Subject: ntp: fix non privileged system time shifting

The ADJ_SETOFFSET bit added in commit 094aa188 ("ntp: Add ADJ_SETOFFSET
mode bit") also introduced a way for any user to change the system time.
Sneaky or buggy calls to adjtimex() could set

    ADJ_OFFSET_SS_READ | ADJ_SETOFFSET

which would result in a successful call to timekeeping_inject_offset().
This patch fixes the issue by adding the capability check.

Signed-off-by: Richard Cochran <richard.cochran@omicron.at>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

diff --git a/kernel/time/ntp.c b/kernel/time/ntp.c
index 5f1bb8e..f6117a4 100644
--- a/kernel/time/ntp.c
+++ b/kernel/time/ntp.c
@@ -652,6 +652,8 @@ int do_adjtimex(struct timex *txc)
 		struct timespec delta;
 		delta.tv_sec  = txc->time.tv_sec;
 		delta.tv_nsec = txc->time.tv_usec;
+		if (!capable(CAP_SYS_TIME))
+			return -EPERM;
 		if (!(txc->modes & ADJ_NANO))
 			delta.tv_nsec *= 1000;
 		result = timekeeping_inject_offset(&delta);
-- 
cgit v0.10.2


From 4acfaf829dacb8f8170b439d30065e8d2cfdaac9 Mon Sep 17 00:00:00 2001
From: Randy Dunlap <randy.dunlap@oracle.com>
Date: Sun, 3 Apr 2011 11:42:00 -0700
Subject: usb/serial: fix function args warnings, dropping *filp

Fix build warnings caused by removal of *filp arg in struct
usb_serial_driver.

These changes were missed somehow in commits 00a0d0d65b61 ("tty: remove
filp from the USB tty ioctls") and 60b33c133ca0b ("tiocmget: kill off
the passing of the struct file")

  drivers/usb/serial/mct_u232.c:159: warning: initialization from incompatible pointer type
  drivers/usb/serial/opticon.c:627: warning: initialization from incompatible pointer type

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Alan Cox <alan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

diff --git a/drivers/usb/serial/mct_u232.c b/drivers/usb/serial/mct_u232.c
index d2c0196..ba0d287 100644
--- a/drivers/usb/serial/mct_u232.c
+++ b/drivers/usb/serial/mct_u232.c
@@ -106,7 +106,7 @@ static void mct_u232_break_ctl(struct tty_struct *tty, int break_state);
 static int  mct_u232_tiocmget(struct tty_struct *tty);
 static int  mct_u232_tiocmset(struct tty_struct *tty,
 			unsigned int set, unsigned int clear);
-static int  mct_u232_ioctl(struct tty_struct *tty, struct file *file,
+static int  mct_u232_ioctl(struct tty_struct *tty,
 			unsigned int cmd, unsigned long arg);
 static int  mct_u232_get_icount(struct tty_struct *tty,
 			struct serial_icounter_struct *icount);
@@ -874,7 +874,7 @@ static void mct_u232_unthrottle(struct tty_struct *tty)
 	}
 }
 
-static int  mct_u232_ioctl(struct tty_struct *tty, struct file *file,
+static int  mct_u232_ioctl(struct tty_struct *tty,
 			unsigned int cmd, unsigned long arg)
 {
 	DEFINE_WAIT(wait);
diff --git a/drivers/usb/serial/opticon.c b/drivers/usb/serial/opticon.c
index 201f609..a1dd4d4 100644
--- a/drivers/usb/serial/opticon.c
+++ b/drivers/usb/serial/opticon.c
@@ -413,7 +413,7 @@ static int opticon_tiocmget(struct tty_struct *tty)
 	return result;
 }
 
-static int opticon_tiocmset(struct tty_struct *tty, struct file *file,
+static int opticon_tiocmset(struct tty_struct *tty,
 			   unsigned int set, unsigned int clear)
 {
 	struct usb_serial_port *port = tty->driver_data;
-- 
cgit v0.10.2


From 738faca34335cd1d5d87fa7c58703139c7fa15bd Mon Sep 17 00:00:00 2001
From: Boris Ostrovsky <boris.ostrovsky@amd.com>
Date: Mon, 4 Apr 2011 13:07:26 -0700
Subject: ipv6: Don't pass invalid dst_entry pointer to dst_release().

Make sure dst_release() is not called with error pointer. This is
similar to commit 4910ac6c526d2868adcb5893e0c428473de862b5 ("ipv4:
Don't ip_rt_put() an error pointer in RAW sockets.").

Signed-off-by: Boris Ostrovsky <boris.ostrovsky@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

diff --git a/net/ipv6/tcp_ipv6.c b/net/ipv6/tcp_ipv6.c
index 2b0c186..56fa125 100644
--- a/net/ipv6/tcp_ipv6.c
+++ b/net/ipv6/tcp_ipv6.c
@@ -503,6 +503,7 @@ static int tcp_v6_send_synack(struct sock *sk, struct request_sock *req,
 	dst = ip6_dst_lookup_flow(sk, &fl6, final_p, false);
 	if (IS_ERR(dst)) {
 		err = PTR_ERR(dst);
+		dst = NULL;
 		goto done;
 	}
 	skb = tcp_make_synack(sk, dst, req, rvp);
-- 
cgit v0.10.2


From a5660b41af6a28f8004e70eb261e1202ad55c5e3 Mon Sep 17 00:00:00 2001
From: Linus Torvalds <torvalds@linux-foundation.org>
Date: Mon, 4 Apr 2011 14:26:54 -0700
Subject: tty: fix endless work loop when the buffer fills up

Commit f23eb2b2b285 ('tty: stop using "delayed_work" in the tty layer')
ended up causing hung machines on UP with no preemption, because the
work routine to flip the buffer data to the ldisc would endlessly re-arm
itself if the destination buffer had filled up.

With the delayed work, that only caused a timer-driving polling of the
tty state every timer tick, but without the delay we just ended up with
basically a busy loop instead.

Stop the insane polling, and instead make the code that opens up the
receive room re-schedule the buffer flip work.  That's what we should
have been doing anyway.

This same "poll for tty room" issue is almost certainly also the cause
of excessive kworker activity when idle reported by Dave Jones, who also
reported "flush_to_ldisc executing 2500 times a second" back in Nov 2010:

  http://lkml.org/lkml/2010/11/30/592

which is that silly flushing done every timer tick.  Wasting both power
and CPU for no good reason.

Reported-and-tested-by: Alexander Beregalov <a.beregalov@gmail.com>
Reported-and-tested-by: Sitsofe Wheeler <sitsofe@yahoo.com>
Cc: Greg KH <gregkh@suse.de>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Dave Jones <davej@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c
index 428f4fe..0ad3288 100644
--- a/drivers/tty/n_tty.c
+++ b/drivers/tty/n_tty.c
@@ -95,6 +95,7 @@ static void n_tty_set_room(struct tty_struct *tty)
 {
 	/* tty->read_cnt is not read locked ? */
 	int	left = N_TTY_BUF_SIZE - tty->read_cnt - 1;
+	int old_left;
 
 	/*
 	 * If we are doing input canonicalization, and there are no
@@ -104,7 +105,12 @@ static void n_tty_set_room(struct tty_struct *tty)
 	 */
 	if (left <= 0)
 		left = tty->icanon && !tty->canon_data;
+	old_left = tty->receive_room;
 	tty->receive_room = left;
+
+	/* Did this open up the receive buffer? We may need to flip */
+	if (left && !old_left)
+		schedule_work(&tty->buf.work);
 }
 
 static void put_tty_queue_nolock(unsigned char c, struct tty_struct *tty)
diff --git a/drivers/tty/tty_buffer.c b/drivers/tty/tty_buffer.c
index b945121..f1a7918 100644
--- a/drivers/tty/tty_buffer.c
+++ b/drivers/tty/tty_buffer.c
@@ -442,10 +442,8 @@ static void flush_to_ldisc(struct work_struct *work)
 			   line discipline as we want to empty the queue */
 			if (test_bit(TTY_FLUSHPENDING, &tty->flags))
 				break;
-			if (!tty->receive_room || seen_tail) {
-				schedule_work(&tty->buf.work);
+			if (!tty->receive_room || seen_tail)
 				break;
-			}
 			if (count > tty->receive_room)
 				count = tty->receive_room;
 			char_buf = head->char_buf_ptr + head->read;
-- 
cgit v0.10.2


From 758f231ea280d0e5f01d537f26ad8f5c0e3de1cc Mon Sep 17 00:00:00 2001
From: Alex Deucher <alexdeucher@gmail.com>
Date: Mon, 4 Apr 2011 11:03:16 -0400
Subject: drm/radeon/kms: add some new ontario pci ids

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Cc:stable@kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>

diff --git a/include/drm/drm_pciids.h b/include/drm/drm_pciids.h
index 820ee90..816e30c 100644
--- a/include/drm/drm_pciids.h
+++ b/include/drm/drm_pciids.h
@@ -472,6 +472,8 @@
 	{0x1002, 0x9803, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_PALM|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \
 	{0x1002, 0x9804, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_PALM|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \
 	{0x1002, 0x9805, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_PALM|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \
+	{0x1002, 0x9806, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_PALM|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \
+	{0x1002, 0x9807, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_PALM|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \
 	{0, 0, 0}
 
 #define r128_PCI_IDS \
-- 
cgit v0.10.2


From 5df23979bc628934febe02e80f9644ec67603ee8 Mon Sep 17 00:00:00 2001
From: Jan Engelhardt <jengelh@medozas.de>
Date: Mon, 4 Apr 2011 01:25:18 +0200
Subject: drm: fix "persistant" typo

Signed-off-by: Jan Engelhardt <jengelh@medozas.de>
Signed-off-by: Dave Airlie <airlied@redhat.com>

diff --git a/drivers/gpu/drm/nouveau/nouveau_gem.c b/drivers/gpu/drm/nouveau/nouveau_gem.c
index e8b04f4..b52e460 100644
--- a/drivers/gpu/drm/nouveau/nouveau_gem.c
+++ b/drivers/gpu/drm/nouveau/nouveau_gem.c
@@ -97,7 +97,7 @@ nouveau_gem_new(struct drm_device *dev, struct nouveau_channel *chan,
 		return -ENOMEM;
 	}
 
-	nvbo->bo.persistant_swap_storage = nvbo->gem->filp;
+	nvbo->bo.persistent_swap_storage = nvbo->gem->filp;
 	nvbo->gem->driver_private = nvbo;
 	return 0;
 }
diff --git a/drivers/gpu/drm/ttm/ttm_bo.c b/drivers/gpu/drm/ttm/ttm_bo.c
index 0b6a55a..2e618b5 100644
--- a/drivers/gpu/drm/ttm/ttm_bo.c
+++ b/drivers/gpu/drm/ttm/ttm_bo.c
@@ -1168,7 +1168,7 @@ int ttm_bo_init(struct ttm_bo_device *bdev,
 		uint32_t page_alignment,
 		unsigned long buffer_start,
 		bool interruptible,
-		struct file *persistant_swap_storage,
+		struct file *persistent_swap_storage,
 		size_t acc_size,
 		void (*destroy) (struct ttm_buffer_object *))
 {
@@ -1211,7 +1211,7 @@ int ttm_bo_init(struct ttm_bo_device *bdev,
 	bo->priv_flags = 0;
 	bo->mem.placement = (TTM_PL_FLAG_SYSTEM | TTM_PL_FLAG_CACHED);
 	bo->seq_valid = false;
-	bo->persistant_swap_storage = persistant_swap_storage;
+	bo->persistent_swap_storage = persistent_swap_storage;
 	bo->acc_size = acc_size;
 	atomic_inc(&bo->glob->bo_count);
 
@@ -1260,7 +1260,7 @@ int ttm_bo_create(struct ttm_bo_device *bdev,
 			uint32_t page_alignment,
 			unsigned long buffer_start,
 			bool interruptible,
-			struct file *persistant_swap_storage,
+			struct file *persistent_swap_storage,
 			struct ttm_buffer_object **p_bo)
 {
 	struct ttm_buffer_object *bo;
@@ -1282,7 +1282,7 @@ int ttm_bo_create(struct ttm_bo_device *bdev,
 
 	ret = ttm_bo_init(bdev, bo, size, type, placement, page_alignment,
 				buffer_start, interruptible,
-				persistant_swap_storage, acc_size, NULL);
+				persistent_swap_storage, acc_size, NULL);
 	if (likely(ret == 0))
 		*p_bo = bo;
 
@@ -1863,7 +1863,7 @@ static int ttm_bo_swapout(struct ttm_mem_shrink *shrink)
 	if (bo->bdev->driver->swap_notify)
 		bo->bdev->driver->swap_notify(bo);
 
-	ret = ttm_tt_swapout(bo->ttm, bo->persistant_swap_storage);
+	ret = ttm_tt_swapout(bo->ttm, bo->persistent_swap_storage);
 out:
 
 	/**
diff --git a/drivers/gpu/drm/ttm/ttm_tt.c b/drivers/gpu/drm/ttm/ttm_tt.c
index 86d5b17..90e23e0 100644
--- a/drivers/gpu/drm/ttm/ttm_tt.c
+++ b/drivers/gpu/drm/ttm/ttm_tt.c
@@ -332,7 +332,7 @@ void ttm_tt_destroy(struct ttm_tt *ttm)
 		ttm_tt_free_page_directory(ttm);
 	}
 
-	if (!(ttm->page_flags & TTM_PAGE_FLAG_PERSISTANT_SWAP) &&
+	if (!(ttm->page_flags & TTM_PAGE_FLAG_PERSISTENT_SWAP) &&
 	    ttm->swap_storage)
 		fput(ttm->swap_storage);
 
@@ -503,7 +503,7 @@ static int ttm_tt_swapin(struct ttm_tt *ttm)
 		page_cache_release(from_page);
 	}
 
-	if (!(ttm->page_flags & TTM_PAGE_FLAG_PERSISTANT_SWAP))
+	if (!(ttm->page_flags & TTM_PAGE_FLAG_PERSISTENT_SWAP))
 		fput(swap_storage);
 	ttm->swap_storage = NULL;
 	ttm->page_flags &= ~TTM_PAGE_FLAG_SWAPPED;
@@ -514,7 +514,7 @@ out_err:
 	return ret;
 }
 
-int ttm_tt_swapout(struct ttm_tt *ttm, struct file *persistant_swap_storage)
+int ttm_tt_swapout(struct ttm_tt *ttm, struct file *persistent_swap_storage)
 {
 	struct address_space *swap_space;
 	struct file *swap_storage;
@@ -540,7 +540,7 @@ int ttm_tt_swapout(struct ttm_tt *ttm, struct file *persistant_swap_storage)
 		return 0;
 	}
 
-	if (!persistant_swap_storage) {
+	if (!persistent_swap_storage) {
 		swap_storage = shmem_file_setup("ttm swap",
 						ttm->num_pages << PAGE_SHIFT,
 						0);
@@ -549,7 +549,7 @@ int ttm_tt_swapout(struct ttm_tt *ttm, struct file *persistant_swap_storage)
 			return PTR_ERR(swap_storage);
 		}
 	} else
-		swap_storage = persistant_swap_storage;
+		swap_storage = persistent_swap_storage;
 
 	swap_space = swap_storage->f_path.dentry->d_inode->i_mapping;
 
@@ -577,12 +577,12 @@ int ttm_tt_swapout(struct ttm_tt *ttm, struct file *persistant_swap_storage)
 	ttm_tt_free_alloced_pages(ttm);
 	ttm->swap_storage = swap_storage;
 	ttm->page_flags |= TTM_PAGE_FLAG_SWAPPED;
-	if (persistant_swap_storage)
-		ttm->page_flags |= TTM_PAGE_FLAG_PERSISTANT_SWAP;
+	if (persistent_swap_storage)
+		ttm->page_flags |= TTM_PAGE_FLAG_PERSISTENT_SWAP;
 
 	return 0;
 out_err:
-	if (!persistant_swap_storage)
+	if (!persistent_swap_storage)
 		fput(swap_storage);
 
 	return ret;
diff --git a/include/drm/ttm/ttm_bo_api.h b/include/drm/ttm/ttm_bo_api.h
index 50852aa..a6bd117 100644
--- a/include/drm/ttm/ttm_bo_api.h
+++ b/include/drm/ttm/ttm_bo_api.h
@@ -158,9 +158,9 @@ struct ttm_tt;
  * the object is destroyed.
  * @event_queue: Queue for processes waiting on buffer object status change.
  * @mem: structure describing current placement.
- * @persistant_swap_storage: Usually the swap storage is deleted for buffers
+ * @persistent_swap_storage: Usually the swap storage is deleted for buffers
  * pinned in physical memory. If this behaviour is not desired, this member
- * holds a pointer to a persistant shmem object.
+ * holds a pointer to a persistent shmem object.
  * @ttm: TTM structure holding system pages.
  * @evicted: Whether the object was evicted without user-space knowing.
  * @cpu_writes: For synchronization. Number of cpu writers.
@@ -221,7 +221,7 @@ struct ttm_buffer_object {
 	 */
 
 	struct ttm_mem_reg mem;
-	struct file *persistant_swap_storage;
+	struct file *persistent_swap_storage;
 	struct ttm_tt *ttm;
 	bool evicted;
 
@@ -459,9 +459,9 @@ extern void ttm_bo_synccpu_write_release(struct ttm_buffer_object *bo);
  * user buffer object.
  * @interruptible: If needing to sleep to wait for GPU resources,
  * sleep interruptible.
- * @persistant_swap_storage: Usually the swap storage is deleted for buffers
+ * @persistent_swap_storage: Usually the swap storage is deleted for buffers
  * pinned in physical memory. If this behaviour is not desired, this member
- * holds a pointer to a persistant shmem object. Typically, this would
+ * holds a pointer to a persistent shmem object. Typically, this would
  * point to the shmem object backing a GEM object if TTM is used to back a
  * GEM user interface.
  * @acc_size: Accounted size for this object.
@@ -490,7 +490,7 @@ extern int ttm_bo_init(struct ttm_bo_device *bdev,
 			uint32_t page_alignment,
 			unsigned long buffer_start,
 			bool interrubtible,
-			struct file *persistant_swap_storage,
+			struct file *persistent_swap_storage,
 			size_t acc_size,
 			void (*destroy) (struct ttm_buffer_object *));
 /**
@@ -506,9 +506,9 @@ extern int ttm_bo_init(struct ttm_bo_device *bdev,
  * user buffer object.
  * @interruptible: If needing to sleep while waiting for GPU resources,
  * sleep interruptible.
- * @persistant_swap_storage: Usually the swap storage is deleted for buffers
+ * @persistent_swap_storage: Usually the swap storage is deleted for buffers
  * pinned in physical memory. If this behaviour is not desired, this member
- * holds a pointer to a persistant shmem object. Typically, this would
+ * holds a pointer to a persistent shmem object. Typically, this would
  * point to the shmem object backing a GEM object if TTM is used to back a
  * GEM user interface.
  * @p_bo: On successful completion *p_bo points to the created object.
@@ -528,7 +528,7 @@ extern int ttm_bo_create(struct ttm_bo_device *bdev,
 				uint32_t page_alignment,
 				unsigned long buffer_start,
 				bool interruptible,
-				struct file *persistant_swap_storage,
+				struct file *persistent_swap_storage,
 				struct ttm_buffer_object **p_bo);
 
 /**
diff --git a/include/drm/ttm/ttm_bo_driver.h b/include/drm/ttm/ttm_bo_driver.h
index efed082..960b521 100644
--- a/include/drm/ttm/ttm_bo_driver.h
+++ b/include/drm/ttm/ttm_bo_driver.h
@@ -122,7 +122,7 @@ struct ttm_backend {
 #define TTM_PAGE_FLAG_USER_DIRTY      (1 << 2)
 #define TTM_PAGE_FLAG_WRITE           (1 << 3)
 #define TTM_PAGE_FLAG_SWAPPED         (1 << 4)
-#define TTM_PAGE_FLAG_PERSISTANT_SWAP (1 << 5)
+#define TTM_PAGE_FLAG_PERSISTENT_SWAP (1 << 5)
 #define TTM_PAGE_FLAG_ZERO_ALLOC      (1 << 6)
 #define TTM_PAGE_FLAG_DMA32           (1 << 7)
 
@@ -714,7 +714,7 @@ extern void ttm_tt_cache_flush(struct page *pages[], unsigned long num_pages);
  */
 extern int ttm_tt_set_placement_caching(struct ttm_tt *ttm, uint32_t placement);
 extern int ttm_tt_swapout(struct ttm_tt *ttm,
-			  struct file *persistant_swap_storage);
+			  struct file *persistent_swap_storage);
 
 /*
  * ttm_bo.c
-- 
cgit v0.10.2


From 21b86bd5a838ee882d36d354185e29650b0757dd Mon Sep 17 00:00:00 2001
From: Daniel Baluta <dbaluta@ixiacom.com>
Date: Mon, 4 Apr 2011 14:58:03 -0700
Subject: Documentation: update kmemleak arch. info

Besides x86 and arm, kmemleak now supports powerpc, sparc, sh,
microblaze and tile.

Signed-off-by: Daniel Baluta <dbaluta@ixiacom.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

diff --git a/Documentation/kmemleak.txt b/Documentation/kmemleak.txt
index 34f6638..090e6ee 100644
--- a/Documentation/kmemleak.txt
+++ b/Documentation/kmemleak.txt
@@ -11,6 +11,7 @@ with the difference that the orphan objects are not freed but only
 reported via /sys/kernel/debug/kmemleak. A similar method is used by the
 Valgrind tool (memcheck --leak-check) to detect the memory leaks in
 user-space applications.
+Kmemleak is supported on x86, arm, powerpc, sparc, sh, microblaze and tile.
 
 Usage
 -----
@@ -178,5 +179,4 @@ block doesn't need to be freed (some cases in the init_call functions),
 the pointer is calculated by other methods than the usual container_of
 macro or the pointer is stored in a location not scanned by kmemleak.
 
-Page allocations and ioremap are not tracked. Only the ARM and x86
-architectures are currently supported.
+Page allocations and ioremap are not tracked.
-- 
cgit v0.10.2


From 5aba085ededa6c5a1ff465e2aebc3e8eb00a7567 Mon Sep 17 00:00:00 2001
From: Randy Dunlap <randy.dunlap@oracle.com>
Date: Mon, 4 Apr 2011 14:59:31 -0700
Subject: kernel/signal.c: fix typos and coding style

General coding style and comment fixes; no code changes:

 - Use multi-line-comment coding style.
 - Put some function signatures completely on one line.
 - Hyphenate some words.
 - Spell Posix as POSIX.
 - Correct typos & spellos in some comments.
 - Drop trailing whitespace.
 - End sentences with periods.

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

diff --git a/kernel/signal.c b/kernel/signal.c
index 1186cf7..3ab90e8 100644
--- a/kernel/signal.c
+++ b/kernel/signal.c
@@ -226,7 +226,7 @@ static inline void print_dropped_signal(int sig)
 /*
  * allocate a new signal queue record
  * - this may be called without locks if and only if t == current, otherwise an
- *   appopriate lock must be held to stop the target task from exiting
+ *   appropriate lock must be held to stop the target task from exiting
  */
 static struct sigqueue *
 __sigqueue_alloc(int sig, struct task_struct *t, gfp_t flags, int override_rlimit)
@@ -375,15 +375,15 @@ int unhandled_signal(struct task_struct *tsk, int sig)
 	return !tracehook_consider_fatal_signal(tsk, sig);
 }
 
-
-/* Notify the system that a driver wants to block all signals for this
+/*
+ * Notify the system that a driver wants to block all signals for this
  * process, and wants to be notified if any signals at all were to be
  * sent/acted upon.  If the notifier routine returns non-zero, then the
  * signal will be acted upon after all.  If the notifier routine returns 0,
  * then then signal will be blocked.  Only one block per process is
  * allowed.  priv is a pointer to private data that the notifier routine
- * can use to determine if the signal should be blocked or not.  */
-
+ * can use to determine if the signal should be blocked or not.
+ */
 void
 block_all_signals(int (*notifier)(void *priv), void *priv, sigset_t *mask)
 {
@@ -434,9 +434,10 @@ still_pending:
 		copy_siginfo(info, &first->info);
 		__sigqueue_free(first);
 	} else {
-		/* Ok, it wasn't in the queue.  This must be
-		   a fast-pathed signal or we must have been
-		   out of queue space.  So zero out the info.
+		/*
+		 * Ok, it wasn't in the queue.  This must be
+		 * a fast-pathed signal or we must have been
+		 * out of queue space.  So zero out the info.
 		 */
 		info->si_signo = sig;
 		info->si_errno = 0;
@@ -468,7 +469,7 @@ static int __dequeue_signal(struct sigpending *pending, sigset_t *mask,
 }
 
 /*
- * Dequeue a signal and return the element to the caller, which is 
+ * Dequeue a signal and return the element to the caller, which is
  * expected to free it.
  *
  * All callers have to hold the siglock.
@@ -490,7 +491,7 @@ int dequeue_signal(struct task_struct *tsk, sigset_t *mask, siginfo_t *info)
 		 * itimers are process shared and we restart periodic
 		 * itimers in the signal delivery path to prevent DoS
 		 * attacks in the high resolution timer case. This is
-		 * compliant with the old way of self restarting
+		 * compliant with the old way of self-restarting
 		 * itimers, as the SIGALRM is a legacy signal and only
 		 * queued once. Changing the restart behaviour to
 		 * restart the timer in the signal dequeue path is
@@ -923,14 +924,15 @@ static int __send_signal(int sig, struct siginfo *info, struct task_struct *t,
 	if (info == SEND_SIG_FORCED)
 		goto out_set;
 
-	/* Real-time signals must be queued if sent by sigqueue, or
-	   some other real-time mechanism.  It is implementation
-	   defined whether kill() does so.  We attempt to do so, on
-	   the principle of least surprise, but since kill is not
-	   allowed to fail with EAGAIN when low on memory we just
-	   make sure at least one signal gets delivered and don't
-	   pass on the info struct.  */
-
+	/*
+	 * Real-time signals must be queued if sent by sigqueue, or
+	 * some other real-time mechanism.  It is implementation
+	 * defined whether kill() does so.  We attempt to do so, on
+	 * the principle of least surprise, but since kill is not
+	 * allowed to fail with EAGAIN when low on memory we just
+	 * make sure at least one signal gets delivered and don't
+	 * pass on the info struct.
+	 */
 	if (sig < SIGRTMIN)
 		override_rlimit = (is_si_special(info) || info->si_code >= 0);
 	else
@@ -1201,8 +1203,7 @@ retry:
 	return error;
 }
 
-int
-kill_proc_info(int sig, struct siginfo *info, pid_t pid)
+int kill_proc_info(int sig, struct siginfo *info, pid_t pid)
 {
 	int error;
 	rcu_read_lock();
@@ -1299,8 +1300,7 @@ static int kill_something_info(int sig, struct siginfo *info, pid_t pid)
  * These are for backward compatibility with the rest of the kernel source.
  */
 
-int
-send_sig_info(int sig, struct siginfo *info, struct task_struct *p)
+int send_sig_info(int sig, struct siginfo *info, struct task_struct *p)
 {
 	/*
 	 * Make sure legacy kernel users don't send in bad values
@@ -1368,7 +1368,7 @@ EXPORT_SYMBOL(kill_pid);
  * These functions support sending signals using preallocated sigqueue
  * structures.  This is needed "because realtime applications cannot
  * afford to lose notifications of asynchronous events, like timer
- * expirations or I/O completions".  In the case of Posix Timers
+ * expirations or I/O completions".  In the case of POSIX Timers
  * we allocate the sigqueue structure from the timer_create.  If this
  * allocation fails we are able to report the failure to the application
  * with an EAGAIN error.
@@ -1553,7 +1553,7 @@ static void do_notify_parent_cldstop(struct task_struct *tsk, int why)
 	info.si_signo = SIGCHLD;
 	info.si_errno = 0;
 	/*
-	 * see comment in do_notify_parent() abot the following 3 lines
+	 * see comment in do_notify_parent() about the following 4 lines
 	 */
 	rcu_read_lock();
 	info.si_pid = task_pid_nr_ns(tsk, parent->nsproxy->pid_ns);
@@ -1611,7 +1611,7 @@ static inline int may_ptrace_stop(void)
 }
 
 /*
- * Return nonzero if there is a SIGKILL that should be waking us up.
+ * Return non-zero if there is a SIGKILL that should be waking us up.
  * Called with the siglock held.
  */
 static int sigkill_pending(struct task_struct *tsk)
@@ -1735,7 +1735,7 @@ void ptrace_notify(int exit_code)
 /*
  * This performs the stopping for SIGSTOP and other stop signals.
  * We have to stop all threads in the thread group.
- * Returns nonzero if we've actually stopped and released the siglock.
+ * Returns non-zero if we've actually stopped and released the siglock.
  * Returns zero if we didn't stop and still hold the siglock.
  */
 static int do_signal_stop(int signr)
@@ -1823,10 +1823,12 @@ static int ptrace_signal(int signr, siginfo_t *info,
 
 	current->exit_code = 0;
 
-	/* Update the siginfo structure if the signal has
-	   changed.  If the debugger wanted something
-	   specific in the siginfo structure then it should
-	   have updated *info via PTRACE_SETSIGINFO.  */
+	/*
+	 * Update the siginfo structure if the signal has
+	 * changed.  If the debugger wanted something
+	 * specific in the siginfo structure then it should
+	 * have updated *info via PTRACE_SETSIGINFO.
+	 */
 	if (signr != info->si_signo) {
 		info->si_signo = signr;
 		info->si_errno = 0;
@@ -2034,7 +2036,8 @@ void exit_signals(struct task_struct *tsk)
 	if (!signal_pending(tsk))
 		goto out;
 
-	/* It could be that __group_complete_signal() choose us to
+	/*
+	 * It could be that __group_complete_signal() choose us to
 	 * notify about group-wide signal. Another thread should be
 	 * woken now to take the signal since we will not.
 	 */
@@ -2183,7 +2186,7 @@ long do_sigpending(void __user *set, unsigned long sigsetsize)
 
 out:
 	return error;
-}	
+}
 
 SYSCALL_DEFINE2(rt_sigpending, sigset_t __user *, set, size_t, sigsetsize)
 {
@@ -2233,9 +2236,9 @@ int copy_siginfo_to_user(siginfo_t __user *to, siginfo_t *from)
 		err |= __put_user(from->si_trapno, &to->si_trapno);
 #endif
 #ifdef BUS_MCEERR_AO
-		/* 
+		/*
 		 * Other callers might not initialize the si_lsb field,
-	 	 * so check explicitely for the right codes here.
+		 * so check explicitly for the right codes here.
 		 */
 		if (from->si_code == BUS_MCEERR_AR || from->si_code == BUS_MCEERR_AO)
 			err |= __put_user(from->si_addr_lsb, &to->si_addr_lsb);
@@ -2280,7 +2283,7 @@ SYSCALL_DEFINE4(rt_sigtimedwait, const sigset_t __user *, uthese,
 
 	if (copy_from_user(&these, uthese, sizeof(these)))
 		return -EFAULT;
-		
+
 	/*
 	 * Invert the set of allowed signals to get those we
 	 * want to block.
@@ -2305,9 +2308,11 @@ SYSCALL_DEFINE4(rt_sigtimedwait, const sigset_t __user *, uthese,
 				   + (ts.tv_sec || ts.tv_nsec));
 
 		if (timeout) {
-			/* None ready -- temporarily unblock those we're
+			/*
+			 * None ready -- temporarily unblock those we're
 			 * interested while we are sleeping in so that we'll
-			 * be awakened when they arrive.  */
+			 * be awakened when they arrive.
+			 */
 			current->real_blocked = current->blocked;
 			sigandsets(&current->blocked, &current->blocked, &these);
 			recalc_sigpending();
@@ -2553,12 +2558,11 @@ do_sigaltstack (const stack_t __user *uss, stack_t __user *uoss, unsigned long s
 
 		error = -EINVAL;
 		/*
-		 *
-		 * Note - this code used to test ss_flags incorrectly
+		 * Note - this code used to test ss_flags incorrectly:
 		 *  	  old code may have been written using ss_flags==0
 		 *	  to mean ss_flags==SS_ONSTACK (as this was the only
 		 *	  way that worked) - this fix preserves that older
-		 *	  mechanism
+		 *	  mechanism.
 		 */
 		if (ss_flags != SS_DISABLE && ss_flags != SS_ONSTACK && ss_flags != 0)
 			goto out;
@@ -2600,8 +2604,10 @@ SYSCALL_DEFINE1(sigpending, old_sigset_t __user *, set)
 #endif
 
 #ifdef __ARCH_WANT_SYS_SIGPROCMASK
-/* Some platforms have their own version with special arguments others
-   support only sys_rt_sigprocmask.  */
+/*
+ * Some platforms have their own version with special arguments;
+ * others support only sys_rt_sigprocmask.
+ */
 
 SYSCALL_DEFINE3(sigprocmask, int, how, old_sigset_t __user *, set,
 		old_sigset_t __user *, oset)
-- 
cgit v0.10.2


From 41c57892a2895865afc89ff1a21f91a0f1506f66 Mon Sep 17 00:00:00 2001
From: Randy Dunlap <randy.dunlap@oracle.com>
Date: Mon, 4 Apr 2011 15:00:26 -0700
Subject: kernel/signal.c: add kernel-doc notation to syscalls

Add kernel-doc to syscalls in signal.c.

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

diff --git a/kernel/signal.c b/kernel/signal.c
index 3ab90e8..dc17929 100644
--- a/kernel/signal.c
+++ b/kernel/signal.c
@@ -2075,6 +2075,9 @@ EXPORT_SYMBOL(unblock_all_signals);
  * System call entry points.
  */
 
+/**
+ *  sys_restart_syscall - restart a system call
+ */
 SYSCALL_DEFINE0(restart_syscall)
 {
 	struct restart_block *restart = &current_thread_info()->restart_block;
@@ -2128,6 +2131,13 @@ int sigprocmask(int how, sigset_t *set, sigset_t *oldset)
 	return error;
 }
 
+/**
+ *  sys_rt_sigprocmask - change the list of currently blocked signals
+ *  @how: whether to add, remove, or set signals
+ *  @set: stores pending signals
+ *  @oset: previous value of signal mask if non-null
+ *  @sigsetsize: size of sigset_t type
+ */
 SYSCALL_DEFINE4(rt_sigprocmask, int, how, sigset_t __user *, set,
 		sigset_t __user *, oset, size_t, sigsetsize)
 {
@@ -2188,6 +2198,12 @@ out:
 	return error;
 }
 
+/**
+ *  sys_rt_sigpending - examine a pending signal that has been raised
+ *			while blocked
+ *  @set: stores pending signals
+ *  @sigsetsize: size of sigset_t type or larger
+ */
 SYSCALL_DEFINE2(rt_sigpending, sigset_t __user *, set, size_t, sigsetsize)
 {
 	return do_sigpending(set, sigsetsize);
@@ -2267,6 +2283,14 @@ int copy_siginfo_to_user(siginfo_t __user *to, siginfo_t *from)
 
 #endif
 
+/**
+ *  sys_rt_sigtimedwait - synchronously wait for queued signals specified
+ *			in @uthese
+ *  @uthese: queued signals to wait for
+ *  @uinfo: if non-null, the signal's siginfo is returned here
+ *  @uts: upper bound on process time suspension
+ *  @sigsetsize: size of sigset_t type
+ */
 SYSCALL_DEFINE4(rt_sigtimedwait, const sigset_t __user *, uthese,
 		siginfo_t __user *, uinfo, const struct timespec __user *, uts,
 		size_t, sigsetsize)
@@ -2344,6 +2368,11 @@ SYSCALL_DEFINE4(rt_sigtimedwait, const sigset_t __user *, uthese,
 	return ret;
 }
 
+/**
+ *  sys_kill - send a signal to a process
+ *  @pid: the PID of the process
+ *  @sig: signal to be sent
+ */
 SYSCALL_DEFINE2(kill, pid_t, pid, int, sig)
 {
 	struct siginfo info;
@@ -2419,7 +2448,11 @@ SYSCALL_DEFINE3(tgkill, pid_t, tgid, pid_t, pid, int, sig)
 	return do_tkill(tgid, pid, sig);
 }
 
-/*
+/**
+ *  sys_tkill - send signal to one specific task
+ *  @pid: the PID of the task
+ *  @sig: signal to be sent
+ *
  *  Send a signal to only one task, even if it's a CLONE_THREAD task.
  */
 SYSCALL_DEFINE2(tkill, pid_t, pid, int, sig)
@@ -2431,6 +2464,12 @@ SYSCALL_DEFINE2(tkill, pid_t, pid, int, sig)
 	return do_tkill(0, pid, sig);
 }
 
+/**
+ *  sys_rt_sigqueueinfo - send signal information to a signal
+ *  @pid: the PID of the thread
+ *  @sig: signal to be sent
+ *  @uinfo: signal info to be sent
+ */
 SYSCALL_DEFINE3(rt_sigqueueinfo, pid_t, pid, int, sig,
 		siginfo_t __user *, uinfo)
 {
@@ -2596,6 +2635,10 @@ out:
 
 #ifdef __ARCH_WANT_SYS_SIGPENDING
 
+/**
+ *  sys_sigpending - examine pending signals
+ *  @set: where mask of pending signal is returned
+ */
 SYSCALL_DEFINE1(sigpending, old_sigset_t __user *, set)
 {
 	return do_sigpending(set, sizeof(*set));
@@ -2604,7 +2647,12 @@ SYSCALL_DEFINE1(sigpending, old_sigset_t __user *, set)
 #endif
 
 #ifdef __ARCH_WANT_SYS_SIGPROCMASK
-/*
+/**
+ *  sys_sigprocmask - examine and change blocked signals
+ *  @how: whether to add, remove, or set signals
+ *  @set: signals to add or remove (if non-null)
+ *  @oset: previous value of signal mask if non-null
+ *
  * Some platforms have their own version with special arguments;
  * others support only sys_rt_sigprocmask.
  */
@@ -2660,6 +2708,13 @@ out:
 #endif /* __ARCH_WANT_SYS_SIGPROCMASK */
 
 #ifdef __ARCH_WANT_SYS_RT_SIGACTION
+/**
+ *  sys_rt_sigaction - alter an action taken by a process
+ *  @sig: signal to be sent
+ *  @act: the thread group ID of the thread
+ *  @oact: the PID of the thread
+ *  @sigsetsize: size of sigset_t type
+ */
 SYSCALL_DEFINE4(rt_sigaction, int, sig,
 		const struct sigaction __user *, act,
 		struct sigaction __user *, oact,
@@ -2746,6 +2801,12 @@ SYSCALL_DEFINE0(pause)
 #endif
 
 #ifdef __ARCH_WANT_SYS_RT_SIGSUSPEND
+/**
+ *  sys_rt_sigsuspend - replace the signal mask for a value with the
+ *	@unewset value until a signal is received
+ *  @unewset: new signal mask value
+ *  @sigsetsize: size of sigset_t type
+ */
 SYSCALL_DEFINE2(rt_sigsuspend, sigset_t __user *, unewset, size_t, sigsetsize)
 {
 	sigset_t newset;
-- 
cgit v0.10.2


From 44a4dcf75c58157a5d036ff783dfb2254703b93e Mon Sep 17 00:00:00 2001
From: Randy Dunlap <randy.dunlap@oracle.com>
Date: Mon, 4 Apr 2011 15:02:24 -0700
Subject: Documentation: update panic parameter info

Add a little more info for some of the panic-related kernel parameters.
Fix "oops=panic" to fit in 80 columns.

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Reviewed-by: Jesper Juhl <jj@chaosbits.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index c357a31..f2e5f3f 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -1832,15 +1832,17 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 				perfmon on Intel CPUs instead of the
 				CPU specific event set.
 
-	oops=panic	Always panic on oopses. Default is to just kill the process,
-			but there is a small probability of deadlocking the machine.
+	oops=panic	Always panic on oopses. Default is to just kill the
+			process, but there is a small probability of
+			deadlocking the machine.
 			This will also cause panics on machine check exceptions.
 			Useful together with panic=30 to trigger a reboot.
 
 	OSS		[HW,OSS]
 			See Documentation/sound/oss/oss-parameters.txt
 
-	panic=		[KNL] Kernel behaviour on panic
+	panic=		[KNL] Kernel behaviour on panic: delay <timeout>
+			seconds before rebooting
 			Format: <timeout>
 
 	parkbd.port=	[HW] Parallel port number the keyboard adapter is
@@ -2343,6 +2345,7 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 
 	softlockup_panic=
 			[KNL] Should the soft-lockup detector generate panics.
+			Format: <integer>
 
 	sonypi.*=	[HW] Sony Programmable I/O Control Device driver
 			See Documentation/sonypi.txt
@@ -2529,8 +2532,7 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 			reported either.
 
 	unknown_nmi_panic
-			[X86]
-			Set unknown_nmi_panic=1 early on boot.
+			[X86] Cause panic on unknown NMI.
 
 	usbcore.autosuspend=
 			[USB] The autosuspend time delay (in seconds) used
-- 
cgit v0.10.2


From f65e51d740688b8a0ad15cbde34974e6c4559972 Mon Sep 17 00:00:00 2001
From: Sylvestre Ledru <sylvestre.ledru@scilab.org>
Date: Mon, 4 Apr 2011 15:04:46 -0700
Subject: Documentation: fix minor typos/spelling

Fix some minor typos:
 * informations => information
 * there own => their own
 * these => this

Signed-off-by: Sylvestre Ledru <sylvestre.ledru@scilab.org>
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

diff --git a/Documentation/ABI/testing/sysfs-driver-hid-roccat-kone b/Documentation/ABI/testing/sysfs-driver-hid-roccat-kone
index b4c4f15..3ca39711 100644
--- a/Documentation/ABI/testing/sysfs-driver-hid-roccat-kone
+++ b/Documentation/ABI/testing/sysfs-driver-hid-roccat-kone
@@ -40,7 +40,7 @@ What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-
 Date:		March 2010
 Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
 Description:	The mouse can store 5 profiles which can be switched by the
-                press of a button. A profile holds informations like button
+                press of a button. A profile holds information like button
                 mappings, sensitivity, the colors of the 5 leds and light
                 effects.
                 When read, these files return the respective profile. The
diff --git a/Documentation/ABI/testing/sysfs-driver-hid-roccat-koneplus b/Documentation/ABI/testing/sysfs-driver-hid-roccat-koneplus
index 00efced..326e054 100644
--- a/Documentation/ABI/testing/sysfs-driver-hid-roccat-koneplus
+++ b/Documentation/ABI/testing/sysfs-driver-hid-roccat-koneplus
@@ -33,7 +33,7 @@ Date:		August 2010
 Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
 Description:	The mouse can store 5 profiles which can be switched by the
 		press of a button. A profile is split in settings and buttons.
-		profile_buttons holds informations about button layout.
+		profile_buttons holds information about button layout.
 		When written, this file lets one write the respective profile
 		buttons back to the mouse. The data has to be 77 bytes long.
 		The mouse will reject invalid data.
@@ -47,7 +47,7 @@ Date:		August 2010
 Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
 Description:	The mouse can store 5 profiles which can be switched by the
 		press of a button. A profile is split in settings and buttons.
-		profile_buttons holds informations about button layout.
+		profile_buttons holds information about button layout.
 		When read, these files return the respective profile buttons.
 		The returned data is 77 bytes in size.
 		This file is readonly.
@@ -58,7 +58,7 @@ Date:		October 2010
 Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
 Description:	The mouse can store 5 profiles which can be switched by the
 		press of a button. A profile is split in settings and buttons.
-		profile_settings holds informations like resolution, sensitivity
+		profile_settings holds information like resolution, sensitivity
 		and light effects.
 		When written, this file lets one write the respective profile
 		settings back to the mouse. The data has to be 43 bytes long.
@@ -73,7 +73,7 @@ Date:		August 2010
 Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
 Description:	The mouse can store 5 profiles which can be switched by the
 		press of a button. A profile is split in settings and buttons.
-		profile_settings holds informations like resolution, sensitivity
+		profile_settings holds information like resolution, sensitivity
 		and light effects.
 		When read, these files return the respective profile settings.
 		The returned data is 43 bytes in size.
diff --git a/Documentation/ABI/testing/sysfs-driver-hid-roccat-kovaplus b/Documentation/ABI/testing/sysfs-driver-hid-roccat-kovaplus
index fdfa16f..20f937c 100644
--- a/Documentation/ABI/testing/sysfs-driver-hid-roccat-kovaplus
+++ b/Documentation/ABI/testing/sysfs-driver-hid-roccat-kovaplus
@@ -52,7 +52,7 @@ Date:		January 2011
 Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
 Description:	The mouse can store 5 profiles which can be switched by the
 		press of a button. A profile is split in settings and buttons.
-		profile_buttons holds informations about button layout.
+		profile_buttons holds information about button layout.
 		When written, this file lets one write the respective profile
 		buttons back to the mouse. The data has to be 23 bytes long.
 		The mouse will reject invalid data.
@@ -66,7 +66,7 @@ Date:		January 2011
 Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
 Description:	The mouse can store 5 profiles which can be switched by the
 		press of a button. A profile is split in settings and buttons.
-		profile_buttons holds informations about button layout.
+		profile_buttons holds information about button layout.
 		When read, these files return the respective profile buttons.
 		The returned data is 23 bytes in size.
 		This file is readonly.
@@ -77,7 +77,7 @@ Date:		January 2011
 Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
 Description:	The mouse can store 5 profiles which can be switched by the
 		press of a button. A profile is split in settings and buttons.
-		profile_settings holds informations like resolution, sensitivity
+		profile_settings holds information like resolution, sensitivity
 		and light effects.
 		When written, this file lets one write the respective profile
 		settings back to the mouse. The data has to be 16 bytes long.
@@ -92,7 +92,7 @@ Date:		January 2011
 Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
 Description:	The mouse can store 5 profiles which can be switched by the
 		press of a button. A profile is split in settings and buttons.
-		profile_settings holds informations like resolution, sensitivity
+		profile_settings holds information like resolution, sensitivity
 		and light effects.
 		When read, these files return the respective profile settings.
 		The returned data is 16 bytes in size.
diff --git a/Documentation/ABI/testing/sysfs-driver-hid-roccat-pyra b/Documentation/ABI/testing/sysfs-driver-hid-roccat-pyra
index 5fab71a..3f8de50 100644
--- a/Documentation/ABI/testing/sysfs-driver-hid-roccat-pyra
+++ b/Documentation/ABI/testing/sysfs-driver-hid-roccat-pyra
@@ -39,7 +39,7 @@ Date:		August 2010
 Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
 Description:	The mouse can store 5 profiles which can be switched by the
 		press of a button. A profile is split in settings and buttons.
-		profile_settings holds informations like resolution, sensitivity
+		profile_settings holds information like resolution, sensitivity
 		and light effects.
 		When written, this file lets one write the respective profile
 		settings back to the mouse. The data has to be 13 bytes long.
@@ -54,7 +54,7 @@ Date:		August 2010
 Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
 Description:	The mouse can store 5 profiles which can be switched by the
 		press of a button. A profile is split in settings and buttons.
-		profile_settings holds informations like resolution, sensitivity
+		profile_settings holds information like resolution, sensitivity
 		and light effects.
 		When read, these files return the respective profile settings.
 		The returned data is 13 bytes in size.
@@ -66,7 +66,7 @@ Date:		August 2010
 Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
 Description:	The mouse can store 5 profiles which can be switched by the
 		press of a button. A profile is split in settings and buttons.
-		profile_buttons holds informations about button layout.
+		profile_buttons holds information about button layout.
 		When written, this file lets one write the respective profile
 		buttons back to the mouse. The data has to be 19 bytes long.
 		The mouse will reject invalid data.
@@ -80,7 +80,7 @@ Date:		August 2010
 Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
 Description:	The mouse can store 5 profiles which can be switched by the
 		press of a button. A profile is split in settings and buttons.
-		profile_buttons holds informations about button layout.
+		profile_buttons holds information about button layout.
 		When read, these files return the respective profile buttons.
 		The returned data is 19 bytes in size.
 		This file is readonly.
diff --git a/Documentation/ABI/testing/sysfs-platform-asus-laptop b/Documentation/ABI/testing/sysfs-platform-asus-laptop
index 41ff8ae..cd9d667 100644
--- a/Documentation/ABI/testing/sysfs-platform-asus-laptop
+++ b/Documentation/ABI/testing/sysfs-platform-asus-laptop
@@ -27,7 +27,7 @@ KernelVersion:	2.6.20
 Contact:	"Corentin Chary" <corentincj@iksaif.net>
 Description:
 		Some models like the W1N have a LED display that can be
-		used to display several informations.
+		used to display several items of information.
 		To control the LED display, use the following :
 		    echo 0x0T000DDD > /sys/devices/platform/asus_laptop/
 		where T control the 3 letters display, and DDD the 3 digits display.
diff --git a/Documentation/devicetree/booting-without-of.txt b/Documentation/devicetree/booting-without-of.txt
index 55fd262..50619a0 100644
--- a/Documentation/devicetree/booting-without-of.txt
+++ b/Documentation/devicetree/booting-without-of.txt
@@ -138,7 +138,7 @@ and properties to be present. This will be described in detail in
 section III, but, for example, the kernel does not require you to
 create a node for every PCI device in the system. It is a requirement
 to have a node for PCI host bridges in order to provide interrupt
-routing informations and memory/IO ranges, among others. It is also
+routing information and memory/IO ranges, among others. It is also
 recommended to define nodes for on chip devices and other buses that
 don't specifically fit in an existing OF specification. This creates a
 great flexibility in the way the kernel can then probe those and match
@@ -385,7 +385,7 @@ struct boot_param_header {
      among others, by kexec. If you are on an SMP system, this value
      should match the content of the "reg" property of the CPU node in
      the device-tree corresponding to the CPU calling the kernel entry
-     point (see further chapters for more informations on the required
+     point (see further chapters for more information on the required
      device-tree contents)
 
    - size_dt_strings
@@ -553,7 +553,7 @@ looks like in practice.
 
 This tree is almost a minimal tree. It pretty much contains the
 minimal set of required nodes and properties to boot a linux kernel;
-that is, some basic model informations at the root, the CPUs, and the
+that is, some basic model information at the root, the CPUs, and the
 physical memory layout.  It also includes misc information passed
 through /chosen, like in this example, the platform type (mandatory)
 and the kernel command line arguments (optional).
diff --git a/Documentation/dvb/udev.txt b/Documentation/dvb/udev.txt
index 68ee224..412305b 100644
--- a/Documentation/dvb/udev.txt
+++ b/Documentation/dvb/udev.txt
@@ -1,7 +1,7 @@
 The DVB subsystem currently registers to the sysfs subsystem using the
 "class_simple" interface.
 
-This means that only the basic informations like module loading parameters
+This means that only the basic information like module loading parameters
 are presented through sysfs. Other things that might be interesting are
 currently *not* available.
 
diff --git a/Documentation/edac.txt b/Documentation/edac.txt
index 9ee774d..ccc07c2 100644
--- a/Documentation/edac.txt
+++ b/Documentation/edac.txt
@@ -311,7 +311,7 @@ Total Correctable Errors count attribute file:
 	'ce_noinfo_count'
 
 	This attribute file displays the number of CEs that
-	have occurred wherewith no informations as to which DIMM slot
+	have occurred wherewith no information as to which DIMM slot
 	is having errors. Memory is handicapped, but operational,
 	yet no information is available to indicate which slot
 	the failing memory is in. This count field should be also
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index f2e5f3f..d2b5150 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -2478,8 +2478,8 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 	topology=	[S390]
 			Format: {off | on}
 			Specify if the kernel should make use of the cpu
-			topology informations if the hardware supports these.
-			The scheduler will make use of these informations and
+			topology information if the hardware supports this.
+			The scheduler will make use of this information and
 			e.g. base its process migration decisions on it.
 			Default is on.
 
diff --git a/Documentation/laptops/asus-laptop.txt b/Documentation/laptops/asus-laptop.txt
index c1c5be8..803e51f 100644
--- a/Documentation/laptops/asus-laptop.txt
+++ b/Documentation/laptops/asus-laptop.txt
@@ -61,7 +61,7 @@ Usage
   Hotkeys are also reported as input keys (like keyboards) you can check
   which key are supported using "xev" under X11.
 
-  You can get informations on the version of your DSDT table by reading the
+  You can get information on the version of your DSDT table by reading the
   /sys/devices/platform/asus-laptop/infos entry. If you have a question or a
   bug report to do, please include the output of this entry.
 
@@ -178,7 +178,7 @@ LED display
 -----------
 
   Some models like the W1N have a LED display that can be used to display
-  several informations.
+  several items of information.
 
   LED display works for the following models:
     W1000N
diff --git a/Documentation/networking/batman-adv.txt b/Documentation/networking/batman-adv.txt
index 18afcd8..ee496eb 100644
--- a/Documentation/networking/batman-adv.txt
+++ b/Documentation/networking/batman-adv.txt
@@ -72,7 +72,7 @@ folder:
 #  fragmentation    gw_sel_class  vis_mode
 
 
-There is a special folder for debugging informations:
+There is a special folder for debugging information:
 
 #  ls /sys/kernel/debug/batman_adv/bat0/
 #  gateways     socket        transtable_global  vis_data
diff --git a/Documentation/s390/Debugging390.txt b/Documentation/s390/Debugging390.txt
index 86f9f74..efe998b 100644
--- a/Documentation/s390/Debugging390.txt
+++ b/Documentation/s390/Debugging390.txt
@@ -2273,7 +2273,7 @@ IP forwarding is on.
 There is a lot of useful info in here best found by going in & having a look around,
 so I'll take you through some entries I consider important.
 
-All the processes running on the machine have there own entry defined by
+All the processes running on the machine have their own entry defined by
 /proc/<pid>
 So lets have a look at the init process
 cd /proc/1
diff --git a/Documentation/scsi/sym53c8xx_2.txt b/Documentation/scsi/sym53c8xx_2.txt
index 6f63b79..6af8f7a 100644
--- a/Documentation/scsi/sym53c8xx_2.txt
+++ b/Documentation/scsi/sym53c8xx_2.txt
@@ -285,7 +285,7 @@ from the driver.
 
 7. Profiling information
 
-This driver does not provide profiling informations as did its predecessors.
+This driver does not provide profiling information as did its predecessors.
 This feature was not this useful and added complexity to the code. 
 As the driver code got more complex, I have decided to remove everything 
 that didn't seem actually useful.
diff --git a/Documentation/sound/alsa/ALSA-Configuration.txt b/Documentation/sound/alsa/ALSA-Configuration.txt
index 3c1eddd..181ba5b 100644
--- a/Documentation/sound/alsa/ALSA-Configuration.txt
+++ b/Documentation/sound/alsa/ALSA-Configuration.txt
@@ -2229,7 +2229,7 @@ Proc interfaces (/proc/asound)
 
 /proc/asound/card#/pcm#[cp]/oss
 -------------------------------
-  String "erase" - erase all additional informations about OSS applications
+  String "erase" - erase all additional information about OSS applications
   String "<app_name> <fragments> <fragment_size> [<options>]"
 
    <app_name> - name of application with (higher priority) or without path
diff --git a/Documentation/sound/oss/AudioExcelDSP16 b/Documentation/sound/oss/AudioExcelDSP16
index c0f0892..e0dc064 100644
--- a/Documentation/sound/oss/AudioExcelDSP16
+++ b/Documentation/sound/oss/AudioExcelDSP16
@@ -1,10 +1,10 @@
 Driver
 ------
 
-Informations about Audio Excel DSP 16 driver can be found in the source
+Information about Audio Excel DSP 16 driver can be found in the source
 file aedsp16.c
 Please, read the head of the source before using it. It contain useful
-informations.
+information.
 
 Configuration
 -------------
@@ -68,7 +68,7 @@ Sound cards supported
 This driver supports the SC-6000 and SC-6600 based Gallant's sound card.
 It don't support the Audio Excel DSP 16 III (try the SC-6600 code).
 I'm working on the III version of the card: if someone have useful
-informations about it, please let me know.
+information about it, please let me know.
 For all the non-supported audio cards, you have to boot MS-DOS (or WIN95)
 activating the audio card with the MS-DOS device driver, then you have to
 <ctrl>-<alt>-<del> and boot Linux.
diff --git a/Documentation/sound/oss/README.ymfsb b/Documentation/sound/oss/README.ymfsb
index af8a7d3..b6b7790 100644
--- a/Documentation/sound/oss/README.ymfsb
+++ b/Documentation/sound/oss/README.ymfsb
@@ -5,7 +5,7 @@ FIRST OF ALL
 ============
 
   This code references YAMAHA's sample codes and data sheets.
-  I respect and thank for all people they made open the informations
+  I respect and thank for all people they made open the information
   about YMF7xx cards.
 
   And this codes heavily based on Jeff Garzik <jgarzik@pobox.com>'s
diff --git a/Documentation/video4linux/bttv/Insmod-options b/Documentation/video4linux/bttv/Insmod-options
index bbe3ed6..14c065fa 100644
--- a/Documentation/video4linux/bttv/Insmod-options
+++ b/Documentation/video4linux/bttv/Insmod-options
@@ -1,5 +1,5 @@
 
-Note: "modinfo <module>" prints various informations about a kernel
+Note: "modinfo <module>" prints various information about a kernel
 module, among them a complete and up-to-date list of insmod options.
 This list tends to be outdated because it is updated manually ...
 
diff --git a/Documentation/video4linux/bttv/Sound-FAQ b/Documentation/video4linux/bttv/Sound-FAQ
index 1e6328f..bc5e41d 100644
--- a/Documentation/video4linux/bttv/Sound-FAQ
+++ b/Documentation/video4linux/bttv/Sound-FAQ
@@ -8,7 +8,7 @@ completely by the bt8xx chip, which is common on all boards.  But
 sound is handled in slightly different ways on each board.
 
 To handle the grabber boards correctly, there is a array tvcards[] in
-bttv-cards.c, which holds the informations required for each board.
+bttv-cards.c, which holds the information required for each board.
 Sound will work only, if the correct entry is used (for video it often
 makes no difference).  The bttv driver prints a line to the kernel
 log, telling which card type is used.  Like this one:
diff --git a/Documentation/video4linux/et61x251.txt b/Documentation/video4linux/et61x251.txt
index 1247566..e0cdae4 100644
--- a/Documentation/video4linux/et61x251.txt
+++ b/Documentation/video4linux/et61x251.txt
@@ -191,10 +191,10 @@ Syntax:         <n>
 Description:    Debugging information level, from 0 to 3:
 		0 = none (use carefully)
 		1 = critical errors
-		2 = significant informations
+		2 = significant information
 		3 = more verbose messages
 		Level 3 is useful for testing only, when only one device
-		is used at the same time. It also shows some more informations
+		is used at the same time. It also shows some more information
 		about the hardware being detected. This module parameter can be
 		changed at runtime thanks to the /sys filesystem interface.
 Default:        2
diff --git a/Documentation/video4linux/sn9c102.txt b/Documentation/video4linux/sn9c102.txt
index 73de405..b4f6704 100644
--- a/Documentation/video4linux/sn9c102.txt
+++ b/Documentation/video4linux/sn9c102.txt
@@ -214,10 +214,10 @@ Syntax:         <n>
 Description:    Debugging information level, from 0 to 3:
 		0 = none (use carefully)
 		1 = critical errors
-		2 = significant informations
+		2 = significant information
 		3 = more verbose messages
 		Level 3 is useful for testing only. It also shows some more
-		informations about the hardware being detected.
+		information about the hardware being detected.
 		This parameter can be changed at runtime thanks to the /sys
 		filesystem interface.
 Default:        2
diff --git a/Documentation/video4linux/w9968cf.txt b/Documentation/video4linux/w9968cf.txt
index 05138e8..9649450 100644
--- a/Documentation/video4linux/w9968cf.txt
+++ b/Documentation/video4linux/w9968cf.txt
@@ -413,7 +413,7 @@ Syntax:         <n>
 Description:    Debugging information level, from 0 to 6:
 		0 = none (use carefully)
 		1 = critical errors
-		2 = significant informations
+		2 = significant information
 		3 = configuration or general messages
 		4 = warnings
 		5 = called functions
diff --git a/Documentation/video4linux/zc0301.txt b/Documentation/video4linux/zc0301.txt
index befdfdacd..b41c83c 100644
--- a/Documentation/video4linux/zc0301.txt
+++ b/Documentation/video4linux/zc0301.txt
@@ -181,10 +181,10 @@ Syntax:         <n>
 Description:    Debugging information level, from 0 to 3:
 		0 = none (use carefully)
 		1 = critical errors
-		2 = significant informations
+		2 = significant information
 		3 = more verbose messages
 		Level 3 is useful for testing only, when only one device
-		is used at the same time. It also shows some more informations
+		is used at the same time. It also shows some information
 		about the hardware being detected. This module parameter can be
 		changed at runtime thanks to the /sys filesystem interface.
 Default:        2
@@ -261,7 +261,7 @@ the fingerprint is: '88E8 F32F 7244 68BA 3958  5D40 99DA 5D2A FCE6 35A4'.
 
 11. Credits
 ===========
-- Informations about the chip internals needed to enable the I2C protocol have
+- Information about the chip internals needed to enable the I2C protocol have
   been taken from the documentation of the ZC030x Video4Linux1 driver written
   by Andrew Birkett <andy@nobugs.org>;
 - The initialization values of the ZC0301 controller connected to the PAS202BCB
diff --git a/arch/powerpc/mm/tlb_low_64e.S b/arch/powerpc/mm/tlb_low_64e.S
index 8526bd9..2228151 100644
--- a/arch/powerpc/mm/tlb_low_64e.S
+++ b/arch/powerpc/mm/tlb_low_64e.S
@@ -431,7 +431,7 @@ virt_page_table_tlb_miss_fault:
 	 * The thing is, we know that in normal circumstances, this is
 	 * always called as a second level tlb miss for SW load or as a first
 	 * level TLB miss for HW load, so we should be able to peek at the
-	 * relevant informations in the first exception frame in the PACA.
+	 * relevant information in the first exception frame in the PACA.
 	 *
 	 * However, we do need to double check that, because we may just hit
 	 * a stray kernel pointer or a userland attack trying to hit those
diff --git a/arch/powerpc/platforms/Kconfig b/arch/powerpc/platforms/Kconfig
index 2057682..f7b0772 100644
--- a/arch/powerpc/platforms/Kconfig
+++ b/arch/powerpc/platforms/Kconfig
@@ -46,7 +46,7 @@ config PPC_OF_BOOT_TRAMPOLINE
 	help
 	  Support from booting from Open Firmware or yaboot using an
 	  Open Firmware client interface. This enables the kernel to
-	  communicate with open firmware to retrieve system informations
+	  communicate with open firmware to retrieve system information
 	  such as the device tree.
 
 	  In case of doubt, say Y
-- 
cgit v0.10.2


From 9718269a7f5f6f3d723dd34e05269579a3ccfc1e Mon Sep 17 00:00:00 2001
From: Daniel Baluta <dbaluta@ixiacom.com>
Date: Mon, 4 Apr 2011 15:06:44 -0700
Subject: kemleak-test: build as module only

mm/kmemleak-test.c is used to provide an example of how kmemleak
tool works.

Memory is leaked at module unload-time, so building the test
in kernel (Y) makes the leaks impossible and the test useless.

Qualify DEBUG_KMEMLEAK_TEST config symbol with "depends on m",
to restrict module-only building.

Signed-off-by: Daniel Baluta <dbaluta@ixiacom.com>
Acked-by: Pekka Enberg <penberg@kernel.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug
index df9234c..c768bcd 100644
--- a/lib/Kconfig.debug
+++ b/lib/Kconfig.debug
@@ -434,11 +434,9 @@ config DEBUG_KMEMLEAK_EARLY_LOG_SIZE
 
 config DEBUG_KMEMLEAK_TEST
 	tristate "Simple test for the kernel memory leak detector"
-	depends on DEBUG_KMEMLEAK
+	depends on DEBUG_KMEMLEAK && m
 	help
-	  Say Y or M here to build a test for the kernel memory leak
-	  detector. This option enables a module that explicitly leaks
-	  memory.
+	  This option enables a module that explicitly leaks memory.
 
 	  If unsure, say N.
 
-- 
cgit v0.10.2


From 9a684e19afc630e0763246ee79c0578c1a8eaee8 Mon Sep 17 00:00:00 2001
From: Antonio Ospite <ospite@studenti.unina.it>
Date: Mon, 4 Apr 2011 15:08:46 -0700
Subject: Documentation: consolidate leds files to leds/ subdir

leds: move leds-class documentation under the leds/ subdir.
Add also a leds/00-INDEX file describing the files under leds/

Signed-off-by: Antonio Ospite <ospite@studenti.unina.it>
Acked-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

diff --git a/Documentation/00-INDEX b/Documentation/00-INDEX
index f607367..c17cd4b 100644
--- a/Documentation/00-INDEX
+++ b/Documentation/00-INDEX
@@ -206,8 +206,8 @@ laptops/
 	- directory with laptop related info and laptop driver documentation.
 ldm.txt
 	- a brief description of LDM (Windows Dynamic Disks).
-leds-class.txt
-	- documents LED handling under Linux.
+leds/
+	- directory with info about LED handling under Linux.
 local_ops.txt
 	- semantics and behavior of local atomic operations.
 lockdep-design.txt
diff --git a/Documentation/leds-class.txt b/Documentation/leds-class.txt
deleted file mode 100644
index 58b266b..0000000
--- a/Documentation/leds-class.txt
+++ /dev/null
@@ -1,98 +0,0 @@
-
-LED handling under Linux
-========================
-
-If you're reading this and thinking about keyboard leds, these are
-handled by the input subsystem and the led class is *not* needed.
-
-In its simplest form, the LED class just allows control of LEDs from
-userspace. LEDs appear in /sys/class/leds/. The maximum brightness of the
-LED is defined in max_brightness file. The brightness file will set the brightness
-of the LED (taking a value 0-max_brightness). Most LEDs don't have hardware
-brightness support so will just be turned on for non-zero brightness settings.
-
-The class also introduces the optional concept of an LED trigger. A trigger
-is a kernel based source of led events. Triggers can either be simple or
-complex. A simple trigger isn't configurable and is designed to slot into
-existing subsystems with minimal additional code. Examples are the ide-disk,
-nand-disk and sharpsl-charge triggers. With led triggers disabled, the code
-optimises away.
-
-Complex triggers whilst available to all LEDs have LED specific
-parameters and work on a per LED basis. The timer trigger is an example.
-The timer trigger will periodically change the LED brightness between
-LED_OFF and the current brightness setting. The "on" and "off" time can
-be specified via /sys/class/leds/<device>/delay_{on,off} in milliseconds.
-You can change the brightness value of a LED independently of the timer
-trigger. However, if you set the brightness value to LED_OFF it will
-also disable the timer trigger.
-
-You can change triggers in a similar manner to the way an IO scheduler
-is chosen (via /sys/class/leds/<device>/trigger). Trigger specific
-parameters can appear in /sys/class/leds/<device> once a given trigger is
-selected.
-
-
-Design Philosophy
-=================
-
-The underlying design philosophy is simplicity. LEDs are simple devices
-and the aim is to keep a small amount of code giving as much functionality
-as possible.  Please keep this in mind when suggesting enhancements.
-
-
-LED Device Naming
-=================
-
-Is currently of the form:
-
-"devicename:colour:function"
-
-There have been calls for LED properties such as colour to be exported as
-individual led class attributes. As a solution which doesn't incur as much
-overhead, I suggest these become part of the device name. The naming scheme
-above leaves scope for further attributes should they be needed. If sections
-of the name don't apply, just leave that section blank.
-
-
-Hardware accelerated blink of LEDs
-==================================
-
-Some LEDs can be programmed to blink without any CPU interaction. To
-support this feature, a LED driver can optionally implement the
-blink_set() function (see <linux/leds.h>). To set an LED to blinking,
-however, it is better to use use the API function led_blink_set(),
-as it will check and implement software fallback if necessary.
-
-To turn off blinking again, use the API function led_brightness_set()
-as that will not just set the LED brightness but also stop any software
-timers that may have been required for blinking.
-
-The blink_set() function should choose a user friendly blinking value
-if it is called with *delay_on==0 && *delay_off==0 parameters. In this
-case the driver should give back the chosen value through delay_on and
-delay_off parameters to the leds subsystem.
-
-Setting the brightness to zero with brightness_set() callback function
-should completely turn off the LED and cancel the previously programmed
-hardware blinking function, if any.
-
-
-Known Issues
-============
-
-The LED Trigger core cannot be a module as the simple trigger functions
-would cause nightmare dependency issues. I see this as a minor issue
-compared to the benefits the simple trigger functionality brings. The
-rest of the LED subsystem can be modular.
-
-
-Future Development
-==================
-
-At the moment, a trigger can't be created specifically for a single LED.
-There are a number of cases where a trigger might only be mappable to a
-particular LED (ACPI?). The addition of triggers provided by the LED driver
-should cover this option and be possible to add without breaking the
-current interface.
-
diff --git a/Documentation/leds-lp3944.txt b/Documentation/leds-lp3944.txt
deleted file mode 100644
index c6eda18..0000000
--- a/Documentation/leds-lp3944.txt
+++ /dev/null
@@ -1,50 +0,0 @@
-Kernel driver lp3944
-====================
-
-  * National Semiconductor LP3944 Fun-light Chip
-    Prefix: 'lp3944'
-    Addresses scanned: None (see the Notes section below)
-    Datasheet: Publicly available at the National Semiconductor website
-               http://www.national.com/pf/LP/LP3944.html
-
-Authors:
-        Antonio Ospite <ospite@studenti.unina.it>
-
-
-Description
------------
-The LP3944 is a helper chip that can drive up to 8 leds, with two programmable
-DIM modes; it could even be used as a gpio expander but this driver assumes it
-is used as a led controller.
-
-The DIM modes are used to set _blink_ patterns for leds, the pattern is
-specified supplying two parameters:
-  - period: from 0s to 1.6s
-  - duty cycle: percentage of the period the led is on, from 0 to 100
-
-Setting a led in DIM0 or DIM1 mode makes it blink according to the pattern.
-See the datasheet for details.
-
-LP3944 can be found on Motorola A910 smartphone, where it drives the rgb
-leds, the camera flash light and the lcds power.
-
-
-Notes
------
-The chip is used mainly in embedded contexts, so this driver expects it is
-registered using the i2c_board_info mechanism.
-
-To register the chip at address 0x60 on adapter 0, set the platform data
-according to include/linux/leds-lp3944.h, set the i2c board info:
-
-	static struct i2c_board_info __initdata a910_i2c_board_info[] = {
-		{
-			I2C_BOARD_INFO("lp3944", 0x60),
-			.platform_data = &a910_lp3944_leds,
-		},
-	};
-
-and register it in the platform init function
-
-	i2c_register_board_info(0, a910_i2c_board_info,
-			ARRAY_SIZE(a910_i2c_board_info));
diff --git a/Documentation/leds/00-INDEX b/Documentation/leds/00-INDEX
new file mode 100644
index 0000000..29f481d
--- /dev/null
+++ b/Documentation/leds/00-INDEX
@@ -0,0 +1,8 @@
+leds-class.txt
+	- documents LED handling under Linux.
+leds-lp3944.txt
+	- notes on how to use the leds-lp3944 driver.
+leds-lp5521.txt
+	- notes on how to use the leds-lp5521 driver.
+leds-lp5523.txt
+	- notes on how to use the leds-lp5523 driver.
diff --git a/Documentation/leds/leds-class.txt b/Documentation/leds/leds-class.txt
new file mode 100644
index 0000000..4996586
--- /dev/null
+++ b/Documentation/leds/leds-class.txt
@@ -0,0 +1,97 @@
+
+LED handling under Linux
+========================
+
+If you're reading this and thinking about keyboard leds, these are
+handled by the input subsystem and the led class is *not* needed.
+
+In its simplest form, the LED class just allows control of LEDs from
+userspace. LEDs appear in /sys/class/leds/. The maximum brightness of the
+LED is defined in max_brightness file. The brightness file will set the brightness
+of the LED (taking a value 0-max_brightness). Most LEDs don't have hardware
+brightness support so will just be turned on for non-zero brightness settings.
+
+The class also introduces the optional concept of an LED trigger. A trigger
+is a kernel based source of led events. Triggers can either be simple or
+complex. A simple trigger isn't configurable and is designed to slot into
+existing subsystems with minimal additional code. Examples are the ide-disk,
+nand-disk and sharpsl-charge triggers. With led triggers disabled, the code
+optimises away.
+
+Complex triggers whilst available to all LEDs have LED specific
+parameters and work on a per LED basis. The timer trigger is an example.
+The timer trigger will periodically change the LED brightness between
+LED_OFF and the current brightness setting. The "on" and "off" time can
+be specified via /sys/class/leds/<device>/delay_{on,off} in milliseconds.
+You can change the brightness value of a LED independently of the timer
+trigger. However, if you set the brightness value to LED_OFF it will
+also disable the timer trigger.
+
+You can change triggers in a similar manner to the way an IO scheduler
+is chosen (via /sys/class/leds/<device>/trigger). Trigger specific
+parameters can appear in /sys/class/leds/<device> once a given trigger is
+selected.
+
+
+Design Philosophy
+=================
+
+The underlying design philosophy is simplicity. LEDs are simple devices
+and the aim is to keep a small amount of code giving as much functionality
+as possible.  Please keep this in mind when suggesting enhancements.
+
+
+LED Device Naming
+=================
+
+Is currently of the form:
+
+"devicename:colour:function"
+
+There have been calls for LED properties such as colour to be exported as
+individual led class attributes. As a solution which doesn't incur as much
+overhead, I suggest these become part of the device name. The naming scheme
+above leaves scope for further attributes should they be needed. If sections
+of the name don't apply, just leave that section blank.
+
+
+Hardware accelerated blink of LEDs
+==================================
+
+Some LEDs can be programmed to blink without any CPU interaction. To
+support this feature, a LED driver can optionally implement the
+blink_set() function (see <linux/leds.h>). To set an LED to blinking,
+however, it is better to use use the API function led_blink_set(),
+as it will check and implement software fallback if necessary.
+
+To turn off blinking again, use the API function led_brightness_set()
+as that will not just set the LED brightness but also stop any software
+timers that may have been required for blinking.
+
+The blink_set() function should choose a user friendly blinking value
+if it is called with *delay_on==0 && *delay_off==0 parameters. In this
+case the driver should give back the chosen value through delay_on and
+delay_off parameters to the leds subsystem.
+
+Setting the brightness to zero with brightness_set() callback function
+should completely turn off the LED and cancel the previously programmed
+hardware blinking function, if any.
+
+
+Known Issues
+============
+
+The LED Trigger core cannot be a module as the simple trigger functions
+would cause nightmare dependency issues. I see this as a minor issue
+compared to the benefits the simple trigger functionality brings. The
+rest of the LED subsystem can be modular.
+
+
+Future Development
+==================
+
+At the moment, a trigger can't be created specifically for a single LED.
+There are a number of cases where a trigger might only be mappable to a
+particular LED (ACPI?). The addition of triggers provided by the LED driver
+should cover this option and be possible to add without breaking the
+current interface.
diff --git a/Documentation/leds/leds-lp3944.txt b/Documentation/leds/leds-lp3944.txt
new file mode 100644
index 0000000..c6eda18
--- /dev/null
+++ b/Documentation/leds/leds-lp3944.txt
@@ -0,0 +1,50 @@
+Kernel driver lp3944
+====================
+
+  * National Semiconductor LP3944 Fun-light Chip
+    Prefix: 'lp3944'
+    Addresses scanned: None (see the Notes section below)
+    Datasheet: Publicly available at the National Semiconductor website
+               http://www.national.com/pf/LP/LP3944.html
+
+Authors:
+        Antonio Ospite <ospite@studenti.unina.it>
+
+
+Description
+-----------
+The LP3944 is a helper chip that can drive up to 8 leds, with two programmable
+DIM modes; it could even be used as a gpio expander but this driver assumes it
+is used as a led controller.
+
+The DIM modes are used to set _blink_ patterns for leds, the pattern is
+specified supplying two parameters:
+  - period: from 0s to 1.6s
+  - duty cycle: percentage of the period the led is on, from 0 to 100
+
+Setting a led in DIM0 or DIM1 mode makes it blink according to the pattern.
+See the datasheet for details.
+
+LP3944 can be found on Motorola A910 smartphone, where it drives the rgb
+leds, the camera flash light and the lcds power.
+
+
+Notes
+-----
+The chip is used mainly in embedded contexts, so this driver expects it is
+registered using the i2c_board_info mechanism.
+
+To register the chip at address 0x60 on adapter 0, set the platform data
+according to include/linux/leds-lp3944.h, set the i2c board info:
+
+	static struct i2c_board_info __initdata a910_i2c_board_info[] = {
+		{
+			I2C_BOARD_INFO("lp3944", 0x60),
+			.platform_data = &a910_lp3944_leds,
+		},
+	};
+
+and register it in the platform init function
+
+	i2c_register_board_info(0, a910_i2c_board_info,
+			ARRAY_SIZE(a910_i2c_board_info));
-- 
cgit v0.10.2


From 6ad85239da45d035b2c786f73ec3c2798352c820 Mon Sep 17 00:00:00 2001
From: Geunsik Lim <geunsik.lim@samsung.com>
Date: Mon, 4 Apr 2011 15:10:45 -0700
Subject: Documentation: update cgroups info user groups names

Update suitable words to explain / understand cgroups contents.

Signed-off-by: Geunsik Lim <geunsik.lim@samsung.com>
Cc: Paul Menage <menage@google.com>
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

diff --git a/Documentation/cgroups/cgroups.txt b/Documentation/cgroups/cgroups.txt
index cbdfb7d..aedf1bd 100644
--- a/Documentation/cgroups/cgroups.txt
+++ b/Documentation/cgroups/cgroups.txt
@@ -110,22 +110,22 @@ university server with various users - students, professors, system
 tasks etc. The resource planning for this server could be along the
 following lines:
 
-       CPU :           Top cpuset
+       CPU :          "Top cpuset"
                        /       \
                CPUSet1         CPUSet2
-                  |              |
-               (Profs)         (Students)
+                  |               |
+               (Professors)    (Students)
 
                In addition (system tasks) are attached to topcpuset (so
                that they can run anywhere) with a limit of 20%
 
-       Memory : Professors (50%), students (30%), system (20%)
+       Memory : Professors (50%), Students (30%), system (20%)
 
-       Disk : Prof (50%), students (30%), system (20%)
+       Disk : Professors (50%), Students (30%), system (20%)
 
        Network : WWW browsing (20%), Network File System (60%), others (20%)
                                / \
-                       Prof (15%) students (5%)
+               Professors (15%)  students (5%)
 
 Browsers like Firefox/Lynx go into the WWW network class, while (k)nfsd go
 into NFS network class.
-- 
cgit v0.10.2


From c9149235a42ab93914434fff45c44b45023363f3 Mon Sep 17 00:00:00 2001
From: Tsutomu Itoh <t-itoh@jp.fujitsu.com>
Date: Wed, 30 Mar 2011 00:57:23 +0000
Subject: Btrfs: fix compiler warning in file.c

While compiling Btrfs, I got following messages:

  CC [M]  fs/btrfs/file.o
fs/btrfs/file.c: In function '__btrfs_buffered_write':
fs/btrfs/file.c:909: warning: 'ret' may be used uninitialized in this function
  CC [M]  fs/btrfs/tree-defrag.o

This patch fixes compiler warning.

Signed-off-by: Tsutomu Itoh <t-itoh@jp.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>

diff --git a/fs/btrfs/file.c b/fs/btrfs/file.c
index 656bc0a..e621ea5 100644
--- a/fs/btrfs/file.c
+++ b/fs/btrfs/file.c
@@ -906,7 +906,7 @@ static noinline ssize_t __btrfs_buffered_write(struct file *file,
 	unsigned long last_index;
 	size_t num_written = 0;
 	int nrptrs;
-	int ret;
+	int ret = 0;
 
 	nrptrs = min((iov_iter_count(i) + PAGE_CACHE_SIZE - 1) /
 		     PAGE_CACHE_SIZE, PAGE_CACHE_SIZE /
-- 
cgit v0.10.2


From 200da64e0b039f873f0f20481e6a7d056e7cc6c9 Mon Sep 17 00:00:00 2001
From: Tsutomu Itoh <t-itoh@jp.fujitsu.com>
Date: Thu, 31 Mar 2011 00:44:29 +0000
Subject: Btrfs: fix /proc/mounts info.

Some mount options are not displayed by /proc/mounts.
This patch displays the option such as compress_type by /proc/mounts.

Ex.
  [before]
    $ mount | grep sdc2
    /dev/sdc2 on /test12 type btrfs (rw,space_cache,compress=lzo)
    $ cat /proc/mounts | grep sdc2
    /dev/sdc2 /test12 btrfs rw,relatime,compress 0 0

  [after]
    $ mount | grep sdc2
    /dev/sdc2 on /test12 type btrfs (rw,space_cache,compress=lzo)
    $ cat /proc/mounts | grep sdc2
    /dev/sdc2 /test12 btrfs rw,relatime,compress=lzo,space_cache 0 0

Signed-off-by: Tsutomu Itoh <t-itoh@jp.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>

diff --git a/fs/btrfs/super.c b/fs/btrfs/super.c
index 2edfc03..58e7de9 100644
--- a/fs/btrfs/super.c
+++ b/fs/btrfs/super.c
@@ -644,6 +644,7 @@ static int btrfs_show_options(struct seq_file *seq, struct vfsmount *vfs)
 {
 	struct btrfs_root *root = btrfs_sb(vfs->mnt_sb);
 	struct btrfs_fs_info *info = root->fs_info;
+	char *compress_type;
 
 	if (btrfs_test_opt(root, DEGRADED))
 		seq_puts(seq, ",degraded");
@@ -662,8 +663,16 @@ static int btrfs_show_options(struct seq_file *seq, struct vfsmount *vfs)
 	if (info->thread_pool_size !=  min_t(unsigned long,
 					     num_online_cpus() + 2, 8))
 		seq_printf(seq, ",thread_pool=%d", info->thread_pool_size);
-	if (btrfs_test_opt(root, COMPRESS))
-		seq_puts(seq, ",compress");
+	if (btrfs_test_opt(root, COMPRESS)) {
+		if (info->compress_type == BTRFS_COMPRESS_ZLIB)
+			compress_type = "zlib";
+		else
+			compress_type = "lzo";
+		if (btrfs_test_opt(root, FORCE_COMPRESS))
+			seq_printf(seq, ",compress-force=%s", compress_type);
+		else
+			seq_printf(seq, ",compress=%s", compress_type);
+	}
 	if (btrfs_test_opt(root, NOSSD))
 		seq_puts(seq, ",nossd");
 	if (btrfs_test_opt(root, SSD_SPREAD))
@@ -678,6 +687,12 @@ static int btrfs_show_options(struct seq_file *seq, struct vfsmount *vfs)
 		seq_puts(seq, ",discard");
 	if (!(root->fs_info->sb->s_flags & MS_POSIXACL))
 		seq_puts(seq, ",noacl");
+	if (btrfs_test_opt(root, SPACE_CACHE))
+		seq_puts(seq, ",space_cache");
+	if (btrfs_test_opt(root, CLEAR_CACHE))
+		seq_puts(seq, ",clear_cache");
+	if (btrfs_test_opt(root, USER_SUBVOL_RM_ALLOWED))
+		seq_puts(seq, ",user_subvol_rm_allowed");
 	return 0;
 }
 
-- 
cgit v0.10.2


From fe3f566cd19bb6d787c92b2e202c85f929abf3ac Mon Sep 17 00:00:00 2001
From: Li Zefan <lizf@cn.fujitsu.com>
Date: Mon, 28 Mar 2011 08:30:38 +0000
Subject: Btrfs: Fix oops for defrag with compression turned on

When we defrag a file, whose size can be fit into an inline extent,
with compression enabled, the compress type is set to be
fs_info->compress_type, which is 0 if the btrfs filesystem is mounted
without compress option. This leads to oops.

Reported-by: Daniel Blueman <daniel.blueman@gmail.com>
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>

diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c
index 0627418..62ae9d5 100644
--- a/fs/btrfs/inode.c
+++ b/fs/btrfs/inode.c
@@ -111,6 +111,7 @@ static int btrfs_init_inode_security(struct btrfs_trans_handle *trans,
 static noinline int insert_inline_extent(struct btrfs_trans_handle *trans,
 				struct btrfs_root *root, struct inode *inode,
 				u64 start, size_t size, size_t compressed_size,
+				int compress_type,
 				struct page **compressed_pages)
 {
 	struct btrfs_key key;
@@ -125,12 +126,9 @@ static noinline int insert_inline_extent(struct btrfs_trans_handle *trans,
 	size_t cur_size = size;
 	size_t datasize;
 	unsigned long offset;
-	int compress_type = BTRFS_COMPRESS_NONE;
 
-	if (compressed_size && compressed_pages) {
-		compress_type = root->fs_info->compress_type;
+	if (compressed_size && compressed_pages)
 		cur_size = compressed_size;
-	}
 
 	path = btrfs_alloc_path();
 	if (!path)
@@ -220,7 +218,7 @@ fail:
 static noinline int cow_file_range_inline(struct btrfs_trans_handle *trans,
 				 struct btrfs_root *root,
 				 struct inode *inode, u64 start, u64 end,
-				 size_t compressed_size,
+				 size_t compressed_size, int compress_type,
 				 struct page **compressed_pages)
 {
 	u64 isize = i_size_read(inode);
@@ -253,7 +251,7 @@ static noinline int cow_file_range_inline(struct btrfs_trans_handle *trans,
 		inline_len = min_t(u64, isize, actual_end);
 	ret = insert_inline_extent(trans, root, inode, start,
 				   inline_len, compressed_size,
-				   compressed_pages);
+				   compress_type, compressed_pages);
 	BUG_ON(ret);
 	btrfs_delalloc_release_metadata(inode, end + 1 - start);
 	btrfs_drop_extent_cache(inode, start, aligned_end - 1, 0);
@@ -432,12 +430,13 @@ again:
 			 * to make an uncompressed inline extent.
 			 */
 			ret = cow_file_range_inline(trans, root, inode,
-						    start, end, 0, NULL);
+						    start, end, 0, 0, NULL);
 		} else {
 			/* try making a compressed inline extent */
 			ret = cow_file_range_inline(trans, root, inode,
 						    start, end,
-						    total_compressed, pages);
+						    total_compressed,
+						    compress_type, pages);
 		}
 		if (ret == 0) {
 			/*
@@ -791,7 +790,7 @@ static noinline int cow_file_range(struct inode *inode,
 	if (start == 0) {
 		/* lets try to make an inline extent */
 		ret = cow_file_range_inline(trans, root, inode,
-					    start, end, 0, NULL);
+					    start, end, 0, 0, NULL);
 		if (ret == 0) {
 			extent_clear_unlock_delalloc(inode,
 				     &BTRFS_I(inode)->io_tree,
-- 
cgit v0.10.2


From b44c59a80ded004e1a82712e5f9e17b131c03221 Mon Sep 17 00:00:00 2001
From: Johann Lombardi <johann@whamcloud.com>
Date: Thu, 31 Mar 2011 13:23:47 +0000
Subject: Btrfs: fix subvol_sem leak in btrfs_rename()

btrfs_rename() does not release the subvol_sem if the transaction failed to start.

Signed-off-by: Johann Lombardi <johann@whamcloud.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>

diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c
index 62ae9d5..1ca3e68 100644
--- a/fs/btrfs/inode.c
+++ b/fs/btrfs/inode.c
@@ -6961,8 +6961,10 @@ static int btrfs_rename(struct inode *old_dir, struct dentry *old_dentry,
 	 * should cover the worst case number of items we'll modify.
 	 */
 	trans = btrfs_start_transaction(root, 20);
-	if (IS_ERR(trans))
-		return PTR_ERR(trans);
+	if (IS_ERR(trans)) {
+                ret = PTR_ERR(trans);
+                goto out_notrans;
+        }
 
 	btrfs_set_trans_block_group(trans, new_dir);
 
@@ -7062,7 +7064,7 @@ static int btrfs_rename(struct inode *old_dir, struct dentry *old_dentry,
 	}
 out_fail:
 	btrfs_end_transaction_throttle(trans, root);
-
+out_notrans:
 	if (old_inode->i_ino == BTRFS_FIRST_FREE_OBJECTID)
 		up_read(&root->fs_info->subvol_sem);
 
-- 
cgit v0.10.2


From 8b2b2d3cbefb605501342adaf64d601b545ed154 Mon Sep 17 00:00:00 2001
From: Tsutomu Itoh <t-itoh@jp.fujitsu.com>
Date: Mon, 4 Apr 2011 01:52:13 +0000
Subject: Btrfs: fix memory leak in btrfs_ioctl_start_sync()

Call btrfs_end_transaction() if btrfs_commit_transaction_async() fails.

Signed-off-by: Tsutomu Itoh <t-itoh@jp.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>

diff --git a/fs/btrfs/ioctl.c b/fs/btrfs/ioctl.c
index 6b70e0e..255c7c5 100644
--- a/fs/btrfs/ioctl.c
+++ b/fs/btrfs/ioctl.c
@@ -2436,8 +2436,10 @@ static noinline long btrfs_ioctl_start_sync(struct file *file, void __user *argp
 		return PTR_ERR(trans);
 	transid = trans->transid;
 	ret = btrfs_commit_transaction_async(trans, root, 0);
-	if (ret)
+	if (ret) {
+		btrfs_end_transaction(trans, root);
 		return ret;
+	}
 
 	if (argp)
 		if (copy_to_user(argp, &transid, sizeof(transid)))
-- 
cgit v0.10.2


From 6e8df2ae89ab37730c0062782f844c66ecfc97a7 Mon Sep 17 00:00:00 2001
From: Yoshinori Sano <yoshinori.sano@gmail.com>
Date: Sun, 3 Apr 2011 12:31:28 +0000
Subject: Btrfs: fix memory leak in start_transaction()

Free btrfs_trans_handle when join_transaction() fails
in start_transaction()

Signed-off-by: Yoshinori Sano <yoshinori.sano@gmail.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>

diff --git a/fs/btrfs/transaction.c b/fs/btrfs/transaction.c
index ce48eb5..d01cc24 100644
--- a/fs/btrfs/transaction.c
+++ b/fs/btrfs/transaction.c
@@ -197,6 +197,7 @@ again:
 
 	ret = join_transaction(root);
 	if (ret < 0) {
+		kmem_cache_free(btrfs_trans_handle_cachep, h);
 		if (type != TRANS_JOIN_NOLOCK)
 			mutex_unlock(&root->fs_info->trans_mutex);
 		return ERR_PTR(ret);
-- 
cgit v0.10.2


From adae52b94e18afa1f84fab67df2a8a872c2f5533 Mon Sep 17 00:00:00 2001
From: Miao Xie <miaox@cn.fujitsu.com>
Date: Thu, 31 Mar 2011 09:43:23 +0000
Subject: btrfs: clear __GFP_FS flag in the space cache inode

the object id of the space cache inode's key is allocated from the relative
root, just like the regular file. So we can't identify space cache inode by
checking the object id of the inode's key, and we have to clear __GFP_FS flag
at the time we look up the space cache inode.

Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Liu Bo <liubo2009@cn.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>

diff --git a/fs/btrfs/free-space-cache.c b/fs/btrfs/free-space-cache.c
index 0037427..13575de 100644
--- a/fs/btrfs/free-space-cache.c
+++ b/fs/btrfs/free-space-cache.c
@@ -81,6 +81,8 @@ struct inode *lookup_free_space_inode(struct btrfs_root *root,
 		return ERR_PTR(-ENOENT);
 	}
 
+	inode->i_mapping->flags &= ~__GFP_FS;
+
 	spin_lock(&block_group->lock);
 	if (!root->fs_info->closing) {
 		block_group->inode = igrab(inode);
diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c
index 1ca3e68..57a03f6 100644
--- a/fs/btrfs/inode.c
+++ b/fs/btrfs/inode.c
@@ -2535,8 +2535,6 @@ static void btrfs_read_locked_inode(struct inode *inode)
 	BTRFS_I(inode)->flags = btrfs_inode_flags(leaf, inode_item);
 
 	alloc_group_block = btrfs_inode_block_group(leaf, inode_item);
-	if (location.objectid == BTRFS_FREE_SPACE_OBJECTID)
-		inode->i_mapping->flags &= ~__GFP_FS;
 
 	/*
 	 * try to precache a NULL acl entry for files that don't have
-- 
cgit v0.10.2


From 08fe4db170b4193603d9d31f40ebaf652d07ac9c Mon Sep 17 00:00:00 2001
From: Li Zefan <lizf@cn.fujitsu.com>
Date: Mon, 28 Mar 2011 02:01:25 +0000
Subject: Btrfs: Fix uninitialized root flags for subvolumes

root_item->flags and root_item->byte_limit are not initialized when
a subvolume is created. This bug is not revealed until we added
readonly snapshot support - now you mount a btrfs filesystem and you
may find the subvolumes in it are readonly.

To work around this problem, we steal a bit from root_item->inode_item->flags,
and use it to indicate if those fields have been properly initialized.
When we read a tree root from disk, we check if the bit is set, and if
not we'll set the flag and initialize the two fields of the root item.

Reported-by: Andreas Philipp <philipp.andreas@gmail.com>
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Tested-by: Andreas Philipp <philipp.andreas@gmail.com>
cc: stable@kernel.org
Signed-off-by: Chris Mason <chris.mason@oracle.com>

diff --git a/fs/btrfs/ctree.h b/fs/btrfs/ctree.h
index d47ce83..3458b57 100644
--- a/fs/btrfs/ctree.h
+++ b/fs/btrfs/ctree.h
@@ -1284,6 +1284,8 @@ struct btrfs_root {
 #define BTRFS_INODE_DIRSYNC		(1 << 10)
 #define BTRFS_INODE_COMPRESS		(1 << 11)
 
+#define BTRFS_INODE_ROOT_ITEM_INIT	(1 << 31)
+
 /* some macros to generate set/get funcs for the struct fields.  This
  * assumes there is a lefoo_to_cpu for every type, so lets make a simple
  * one for u8:
@@ -2359,6 +2361,8 @@ int btrfs_find_dead_roots(struct btrfs_root *root, u64 objectid);
 int btrfs_find_orphan_roots(struct btrfs_root *tree_root);
 int btrfs_set_root_node(struct btrfs_root_item *item,
 			struct extent_buffer *node);
+void btrfs_check_and_init_root_item(struct btrfs_root_item *item);
+
 /* dir-item.c */
 int btrfs_insert_dir_item(struct btrfs_trans_handle *trans,
 			  struct btrfs_root *root, const char *name,
diff --git a/fs/btrfs/disk-io.c b/fs/btrfs/disk-io.c
index 5cf3aa7..a272bfd 100644
--- a/fs/btrfs/disk-io.c
+++ b/fs/btrfs/disk-io.c
@@ -1276,8 +1276,10 @@ struct btrfs_root *btrfs_read_fs_root_no_radix(struct btrfs_root *tree_root,
 	root->commit_root = btrfs_root_node(root);
 	BUG_ON(!root->node);
 out:
-	if (location->objectid != BTRFS_TREE_LOG_OBJECTID)
+	if (location->objectid != BTRFS_TREE_LOG_OBJECTID) {
 		root->ref_cows = 1;
+		btrfs_check_and_init_root_item(&root->root_item);
+	}
 
 	return root;
 }
diff --git a/fs/btrfs/ioctl.c b/fs/btrfs/ioctl.c
index 255c7c5..f9c93a9 100644
--- a/fs/btrfs/ioctl.c
+++ b/fs/btrfs/ioctl.c
@@ -373,6 +373,10 @@ static noinline int create_subvol(struct btrfs_root *root,
 	inode_item->nbytes = cpu_to_le64(root->leafsize);
 	inode_item->mode = cpu_to_le32(S_IFDIR | 0755);
 
+	root_item.flags = 0;
+	root_item.byte_limit = 0;
+	inode_item->flags = cpu_to_le64(BTRFS_INODE_ROOT_ITEM_INIT);
+
 	btrfs_set_root_bytenr(&root_item, leaf->start);
 	btrfs_set_root_generation(&root_item, trans->transid);
 	btrfs_set_root_level(&root_item, 0);
diff --git a/fs/btrfs/root-tree.c b/fs/btrfs/root-tree.c
index 29b2d7c..6928bff 100644
--- a/fs/btrfs/root-tree.c
+++ b/fs/btrfs/root-tree.c
@@ -473,3 +473,21 @@ again:
 	btrfs_free_path(path);
 	return 0;
 }
+
+/*
+ * Old btrfs forgets to init root_item->flags and root_item->byte_limit
+ * for subvolumes. To work around this problem, we steal a bit from
+ * root_item->inode_item->flags, and use it to indicate if those fields
+ * have been properly initialized.
+ */
+void btrfs_check_and_init_root_item(struct btrfs_root_item *root_item)
+{
+	u64 inode_flags = le64_to_cpu(root_item->inode.flags);
+
+	if (!(inode_flags & BTRFS_INODE_ROOT_ITEM_INIT)) {
+		inode_flags |= BTRFS_INODE_ROOT_ITEM_INIT;
+		root_item->inode.flags = cpu_to_le64(inode_flags);
+		root_item->flags = 0;
+		root_item->byte_limit = 0;
+	}
+}
diff --git a/fs/btrfs/transaction.c b/fs/btrfs/transaction.c
index d01cc24..5b158da 100644
--- a/fs/btrfs/transaction.c
+++ b/fs/btrfs/transaction.c
@@ -976,6 +976,7 @@ static noinline int create_pending_snapshot(struct btrfs_trans_handle *trans,
 	record_root_in_trans(trans, root);
 	btrfs_set_root_last_snapshot(&root->root_item, trans->transid);
 	memcpy(new_root_item, &root->root_item, sizeof(*new_root_item));
+	btrfs_check_and_init_root_item(new_root_item);
 
 	root_flags = btrfs_root_flags(new_root_item);
 	if (pending->readonly)
-- 
cgit v0.10.2


From 43be21462d8c263e2449b52b23326232fd710bee Mon Sep 17 00:00:00 2001
From: Josef Bacik <josef@redhat.com>
Date: Fri, 1 Apr 2011 14:55:00 +0000
Subject: Btrfs: fix free space cache when there are pinned extents and
 clusters V2

I noticed a huge problem with the free space cache that was presenting
as an early ENOSPC.  Turns out when writing the free space cache out I
forgot to take into account pinned extents and more importantly
clusters.  This would result in us leaking free space everytime we
unmounted the filesystem and remounted it.

I fix this by making sure to check and see if the current block group
has a cluster and writing out any entries that are in the cluster to the
cache, as well as writing any pinned extents we currently have to the
cache since those will be available for us to use the next time the fs
mounts.

This patch also adds a check to the end of load_free_space_cache to make
sure we got the right amount of free space cache, and if not make sure
to clear the cache and re-cache the old fashioned way.

Signed-off-by: Josef Bacik <josef@redhat.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>

diff --git a/fs/btrfs/free-space-cache.c b/fs/btrfs/free-space-cache.c
index 13575de..f561c95 100644
--- a/fs/btrfs/free-space-cache.c
+++ b/fs/btrfs/free-space-cache.c
@@ -24,6 +24,7 @@
 #include "free-space-cache.h"
 #include "transaction.h"
 #include "disk-io.h"
+#include "extent_io.h"
 
 #define BITS_PER_BITMAP		(PAGE_CACHE_SIZE * 8)
 #define MAX_CACHE_BYTES_PER_GIG	(32 * 1024)
@@ -224,6 +225,7 @@ int load_free_space_cache(struct btrfs_fs_info *fs_info,
 	u64 num_entries;
 	u64 num_bitmaps;
 	u64 generation;
+	u64 used = btrfs_block_group_used(&block_group->item);
 	u32 cur_crc = ~(u32)0;
 	pgoff_t index = 0;
 	unsigned long first_page_offset;
@@ -469,6 +471,17 @@ next:
 		index++;
 	}
 
+	spin_lock(&block_group->tree_lock);
+	if (block_group->free_space != (block_group->key.offset - used -
+					block_group->bytes_super)) {
+		spin_unlock(&block_group->tree_lock);
+		printk(KERN_ERR "block group %llu has an wrong amount of free "
+		       "space\n", block_group->key.objectid);
+		ret = 0;
+		goto free_cache;
+	}
+	spin_unlock(&block_group->tree_lock);
+
 	ret = 1;
 out:
 	kfree(checksums);
@@ -497,8 +510,11 @@ int btrfs_write_out_cache(struct btrfs_root *root,
 	struct list_head *pos, *n;
 	struct page *page;
 	struct extent_state *cached_state = NULL;
+	struct btrfs_free_cluster *cluster = NULL;
+	struct extent_io_tree *unpin = NULL;
 	struct list_head bitmap_list;
 	struct btrfs_key key;
+	u64 start, end, len;
 	u64 bytes = 0;
 	u32 *crc, *checksums;
 	pgoff_t index = 0, last_index = 0;
@@ -507,6 +523,7 @@ int btrfs_write_out_cache(struct btrfs_root *root,
 	int entries = 0;
 	int bitmaps = 0;
 	int ret = 0;
+	bool next_page = false;
 
 	root = root->fs_info->tree_root;
 
@@ -553,6 +570,18 @@ int btrfs_write_out_cache(struct btrfs_root *root,
 	 */
 	first_page_offset = (sizeof(u32) * num_checksums) + sizeof(u64);
 
+	/* Get the cluster for this block_group if it exists */
+	if (!list_empty(&block_group->cluster_list))
+		cluster = list_entry(block_group->cluster_list.next,
+				     struct btrfs_free_cluster,
+				     block_group_list);
+
+	/*
+	 * We shouldn't have switched the pinned extents yet so this is the
+	 * right one
+	 */
+	unpin = root->fs_info->pinned_extents;
+
 	/*
 	 * Lock all pages first so we can lock the extent safely.
 	 *
@@ -582,6 +611,12 @@ int btrfs_write_out_cache(struct btrfs_root *root,
 	lock_extent_bits(&BTRFS_I(inode)->io_tree, 0, i_size_read(inode) - 1,
 			 0, &cached_state, GFP_NOFS);
 
+	/*
+	 * When searching for pinned extents, we need to start at our start
+	 * offset.
+	 */
+	start = block_group->key.objectid;
+
 	/* Write out the extent entries */
 	do {
 		struct btrfs_free_space_entry *entry;
@@ -589,6 +624,8 @@ int btrfs_write_out_cache(struct btrfs_root *root,
 		unsigned long offset = 0;
 		unsigned long start_offset = 0;
 
+		next_page = false;
+
 		if (index == 0) {
 			start_offset = first_page_offset;
 			offset = start_offset;
@@ -600,7 +637,7 @@ int btrfs_write_out_cache(struct btrfs_root *root,
 		entry = addr + start_offset;
 
 		memset(addr, 0, PAGE_CACHE_SIZE);
-		while (1) {
+		while (node && !next_page) {
 			struct btrfs_free_space *e;
 
 			e = rb_entry(node, struct btrfs_free_space, offset_index);
@@ -616,12 +653,49 @@ int btrfs_write_out_cache(struct btrfs_root *root,
 				entry->type = BTRFS_FREE_SPACE_EXTENT;
 			}
 			node = rb_next(node);
-			if (!node)
-				break;
+			if (!node && cluster) {
+				node = rb_first(&cluster->root);
+				cluster = NULL;
+			}
 			offset += sizeof(struct btrfs_free_space_entry);
 			if (offset + sizeof(struct btrfs_free_space_entry) >=
 			    PAGE_CACHE_SIZE)
+				next_page = true;
+			entry++;
+		}
+
+		/*
+		 * We want to add any pinned extents to our free space cache
+		 * so we don't leak the space
+		 */
+		while (!next_page && (start < block_group->key.objectid +
+				      block_group->key.offset)) {
+			ret = find_first_extent_bit(unpin, start, &start, &end,
+						    EXTENT_DIRTY);
+			if (ret) {
+				ret = 0;
+				break;
+			}
+
+			/* This pinned extent is out of our range */
+			if (start >= block_group->key.objectid +
+			    block_group->key.offset)
 				break;
+
+			len = block_group->key.objectid +
+				block_group->key.offset - start;
+			len = min(len, end + 1 - start);
+
+			entries++;
+			entry->offset = cpu_to_le64(start);
+			entry->bytes = cpu_to_le64(len);
+			entry->type = BTRFS_FREE_SPACE_EXTENT;
+
+			start = end + 1;
+			offset += sizeof(struct btrfs_free_space_entry);
+			if (offset + sizeof(struct btrfs_free_space_entry) >=
+			    PAGE_CACHE_SIZE)
+				next_page = true;
 			entry++;
 		}
 		*crc = ~(u32)0;
@@ -652,7 +726,7 @@ int btrfs_write_out_cache(struct btrfs_root *root,
 		page_cache_release(page);
 
 		index++;
-	} while (node);
+	} while (node || next_page);
 
 	/* Write out the bitmaps */
 	list_for_each_safe(pos, n, &bitmap_list) {
-- 
cgit v0.10.2


From c9ddec74aa950a220cc4caa5215cfc5d886050b7 Mon Sep 17 00:00:00 2001
From: Josef Bacik <josef@redhat.com>
Date: Mon, 28 Mar 2011 13:43:25 +0000
Subject: Btrfs: don't warn in btrfs_add_orphan

When I moved the orphan adding to btrfs_truncate I missed the fact that during
orphan cleanup we just add the orphan items to the orphan list without going
through btrfs_orphan_add, which results in lots of warnings on mount if you have
any orphan items that need to be truncated.  Just remove this warning since it's
ok, this will allow all of the normal space accounting take place.  Thanks,

Signed-off-by: Josef Bacik <josef@redhat.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>

diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c
index 57a03f6..cc60228 100644
--- a/fs/btrfs/inode.c
+++ b/fs/btrfs/inode.c
@@ -2220,8 +2220,6 @@ int btrfs_orphan_add(struct btrfs_trans_handle *trans, struct inode *inode)
 			insert = 1;
 #endif
 		insert = 1;
-	} else {
-		WARN_ON(!BTRFS_I(inode)->orphan_meta_reserved);
 	}
 
 	if (!BTRFS_I(inode)->orphan_meta_reserved) {
-- 
cgit v0.10.2


From b987812b3fcaf70fdf0037589e5d2f5f2453e6ce Mon Sep 17 00:00:00 2001
From: Paul Gortmaker <paul.gortmaker@windriver.com>
Date: Thu, 31 Mar 2011 07:27:20 +0000
Subject: powerpc/kexec: Fix mismatched ifdefs for PPC64/SMP.

Commit b3df895aebe091b1657 "powerpc/kexec: Add support for FSL-BookE"
introduced the original PPC_STD_MMU_64 checks around the function
crash_kexec_wait_realmode().   Then commit c2be05481f61252
"powerpc: Fix default_machine_crash_shutdown #ifdef botch" changed
the ifdef around the calling site to add a check on SMP, but the
ifdef around the function itself was left unchanged, leaving an
unused function for PPC_STD_MMU_64=y and SMP=n

Rather than have two ifdefs that can get out of sync like this,
simply put the corrected conditional around the function and use
a stub to get rid of one set of ifdefs completely.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

diff --git a/arch/powerpc/kernel/crash.c b/arch/powerpc/kernel/crash.c
index 3d569e2..3d3d416 100644
--- a/arch/powerpc/kernel/crash.c
+++ b/arch/powerpc/kernel/crash.c
@@ -163,7 +163,7 @@ static void crash_kexec_prepare_cpus(int cpu)
 }
 
 /* wait for all the CPUs to hit real mode but timeout if they don't come in */
-#ifdef CONFIG_PPC_STD_MMU_64
+#if defined(CONFIG_PPC_STD_MMU_64) && defined(CONFIG_SMP)
 static void crash_kexec_wait_realmode(int cpu)
 {
 	unsigned int msecs;
@@ -188,6 +188,8 @@ static void crash_kexec_wait_realmode(int cpu)
 	}
 	mb();
 }
+#else
+static inline void crash_kexec_wait_realmode(int cpu) {}
 #endif
 
 /*
@@ -344,9 +346,7 @@ void default_machine_crash_shutdown(struct pt_regs *regs)
 	crash_save_cpu(regs, crashing_cpu);
 	crash_kexec_prepare_cpus(crashing_cpu);
 	cpu_set(crashing_cpu, cpus_in_crash);
-#if defined(CONFIG_PPC_STD_MMU_64) && defined(CONFIG_SMP)
 	crash_kexec_wait_realmode(crashing_cpu);
-#endif
 
 	machine_kexec_mask_interrupts();
 
-- 
cgit v0.10.2


From f86d6b9b36a5d0923fa2abaacd425e328668fe16 Mon Sep 17 00:00:00 2001
From: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Date: Thu, 31 Mar 2011 18:49:45 +0000
Subject: powerpc/pseries: Don't register global initcall

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

diff --git a/arch/powerpc/platforms/pseries/setup.c b/arch/powerpc/platforms/pseries/setup.c
index c319d04..0007241 100644
--- a/arch/powerpc/platforms/pseries/setup.c
+++ b/arch/powerpc/platforms/pseries/setup.c
@@ -378,7 +378,7 @@ static int __init pSeries_init_panel(void)
 
 	return 0;
 }
-arch_initcall(pSeries_init_panel);
+machine_arch_initcall(pseries, pSeries_init_panel);
 
 static int pseries_set_dabr(unsigned long dabr)
 {
-- 
cgit v0.10.2


From c1854e00727f50f7ac99e98d26ece04c087ef785 Mon Sep 17 00:00:00 2001
From: Ryan Grimm <grimm@us.ibm.com>
Date: Thu, 31 Mar 2011 19:33:02 +0000
Subject: powerpc: Set nr_cpu_ids early and use it to free PACAs

Without this, "holes" in the CPU numbering can cause us to
free too many PACAs

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

diff --git a/arch/powerpc/kernel/paca.c b/arch/powerpc/kernel/paca.c
index f4adf89..10f0aad 100644
--- a/arch/powerpc/kernel/paca.c
+++ b/arch/powerpc/kernel/paca.c
@@ -203,7 +203,7 @@ void __init free_unused_pacas(void)
 {
 	int new_size;
 
-	new_size = PAGE_ALIGN(sizeof(struct paca_struct) * num_possible_cpus());
+	new_size = PAGE_ALIGN(sizeof(struct paca_struct) * nr_cpu_ids);
 
 	if (new_size >= paca_size)
 		return;
diff --git a/arch/powerpc/kernel/setup-common.c b/arch/powerpc/kernel/setup-common.c
index 9d4882a..21f30cb 100644
--- a/arch/powerpc/kernel/setup-common.c
+++ b/arch/powerpc/kernel/setup-common.c
@@ -509,6 +509,9 @@ void __init smp_setup_cpu_maps(void)
 	 */
 	cpu_init_thread_core_maps(nthreads);
 
+	/* Now that possible cpus are set, set nr_cpu_ids for later use */
+	nr_cpu_ids = find_last_bit(cpumask_bits(cpu_possible_mask),NR_CPUS) + 1;
+
 	free_unused_pacas();
 }
 #endif /* CONFIG_SMP */
-- 
cgit v0.10.2


From c60e65d7863620945d498a8ac60181077879599c Mon Sep 17 00:00:00 2001
From: Matt Evans <matt@ozlabs.au.ibm.com>
Date: Thu, 31 Mar 2011 19:33:08 +0000
Subject: powerpc/pseries: Fix build without CONFIG_HOTPLUG_CPU

Signed-off-by: Matt Evans <matt@ozlabs.au.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

diff --git a/arch/powerpc/platforms/pseries/smp.c b/arch/powerpc/platforms/pseries/smp.c
index d6479f9..a509c52 100644
--- a/arch/powerpc/platforms/pseries/smp.c
+++ b/arch/powerpc/platforms/pseries/smp.c
@@ -112,10 +112,10 @@ static inline int __devinit smp_startup_cpu(unsigned int lcpu)
 
 	/* Fixup atomic count: it exited inside IRQ handler. */
 	task_thread_info(paca[lcpu].__current)->preempt_count	= 0;
-
+#ifdef CONFIG_HOTPLUG_CPU
 	if (get_cpu_current_state(lcpu) == CPU_STATE_INACTIVE)
 		goto out;
-
+#endif
 	/* 
 	 * If the RTAS start-cpu token does not exist then presume the
 	 * cpu is already spinning.
@@ -130,7 +130,9 @@ static inline int __devinit smp_startup_cpu(unsigned int lcpu)
 		return 0;
 	}
 
+#ifdef CONFIG_HOTPLUG_CPU
 out:
+#endif
 	return 1;
 }
 
@@ -144,16 +146,15 @@ static void __devinit smp_xics_setup_cpu(int cpu)
 		vpa_init(cpu);
 
 	cpumask_clear_cpu(cpu, of_spin_mask);
+#ifdef CONFIG_HOTPLUG_CPU
 	set_cpu_current_state(cpu, CPU_STATE_ONLINE);
 	set_default_offline_state(cpu);
-
+#endif
 }
 #endif /* CONFIG_XICS */
 
 static void __devinit smp_pSeries_kick_cpu(int nr)
 {
-	long rc;
-	unsigned long hcpuid;
 	BUG_ON(nr < 0 || nr >= NR_CPUS);
 
 	if (!smp_startup_cpu(nr))
@@ -165,16 +166,20 @@ static void __devinit smp_pSeries_kick_cpu(int nr)
 	 * the processor will continue on to secondary_start
 	 */
 	paca[nr].cpu_start = 1;
-
+#ifdef CONFIG_HOTPLUG_CPU
 	set_preferred_offline_state(nr, CPU_STATE_ONLINE);
 
 	if (get_cpu_current_state(nr) == CPU_STATE_INACTIVE) {
+		long rc;
+		unsigned long hcpuid;
+
 		hcpuid = get_hard_smp_processor_id(nr);
 		rc = plpar_hcall_norets(H_PROD, hcpuid);
 		if (rc != H_SUCCESS)
 			printk(KERN_ERR "Error: Prod to wake up processor %d "
 						"Ret= %ld\n", nr, rc);
 	}
+#endif
 }
 
 static int smp_pSeries_cpu_bootable(unsigned int nr)
-- 
cgit v0.10.2


From 0de009c900e7ebd21097797f723a40813e953879 Mon Sep 17 00:00:00 2001
From: Chris Wilson <chris@chris-wilson.co.uk>
Date: Tue, 5 Apr 2011 16:04:39 +0100
Subject: drm/i915/crt: Remove 0xa0 probe for VGA

This is a moral revert of 6ec3d0c0e9c0c605696e91048eebaca7b0c36695.

Following the fix to reset the GMBUS controller after a NAK, we finally
utilize the 0xa0 probe for a CRT connection. And discover that the code
is broken. Shock.

There are a number of issues, but following a key insight from Dave
Airlie, that 0xA0 is an invalid address on a 7-bit bus (though not if we
were to enable 10-bit addressing), and would look like the EDID port
0x50, it is possible to see where the confusion starts.

In short, a write to 0xA0 is accepted by the GMBUS controller which we
interpreted as meaning the existence of a connection (a slave on the
other end of the wire ACKing the write). That was false.

During testing with a broken GMBUS implementation, which never reset an
earlier NAK, this test always reported a NAK and so we proceeded on to
the next test.

Reported-and-tested-by: Sitsofe Wheeler <sitsofe@yahoo.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=35904
Reported-and-tested-by:  Riccardo Magliocchetti <riccardo.magliocchetti@gmail.com>
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=32612
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Dave Airlie <airlied@linux.ie>
Signed-off-by: Keith Packard <keithp@keithp.com>

diff --git a/drivers/gpu/drm/i915/intel_crt.c b/drivers/gpu/drm/i915/intel_crt.c
index 8342259..d03fc05 100644
--- a/drivers/gpu/drm/i915/intel_crt.c
+++ b/drivers/gpu/drm/i915/intel_crt.c
@@ -269,21 +269,6 @@ static bool intel_crt_detect_hotplug(struct drm_connector *connector)
 	return ret;
 }
 
-static bool intel_crt_ddc_probe(struct drm_i915_private *dev_priv, int ddc_bus)
-{
-	u8 buf;
-	struct i2c_msg msgs[] = {
-		{
-			.addr = 0xA0,
-			.flags = 0,
-			.len = 1,
-			.buf = &buf,
-		},
-	};
-	/* DDC monitor detect: Does it ACK a write to 0xA0? */
-	return i2c_transfer(&dev_priv->gmbus[ddc_bus].adapter, msgs, 1) == 1;
-}
-
 static bool intel_crt_detect_ddc(struct drm_connector *connector)
 {
 	struct intel_crt *crt = intel_attached_crt(connector);
@@ -293,11 +278,6 @@ static bool intel_crt_detect_ddc(struct drm_connector *connector)
 	if (crt->base.type != INTEL_OUTPUT_ANALOG)
 		return false;
 
-	if (intel_crt_ddc_probe(dev_priv, dev_priv->crt_ddc_pin)) {
-		DRM_DEBUG_KMS("CRT detected via DDC:0xa0\n");
-		return true;
-	}
-
 	if (intel_ddc_probe(&crt->base, dev_priv->crt_ddc_pin)) {
 		struct edid *edid;
 		bool is_digital = false;
-- 
cgit v0.10.2


From a6737ad15b4acf88bbf7753e929faf215adeaa3a Mon Sep 17 00:00:00 2001
From: Chris Wilson <chris@chris-wilson.co.uk>
Date: Tue, 5 Apr 2011 16:04:40 +0100
Subject: drm/i915/lvds: Remove 0xa0 DDC probe for LVDS

This is a revert of 428d2e828c0a68206e5158a42451487601dc9194.

This is broken in the same manner as for VGA: trying to write to an
invalid address on the (currently 7-bit) i2c bus.

One notable failure appears to be for MacBooks. The scary part was that
it gave the appearance of working (i.e. reporting the absence of the
panel) on various all-in-one machines with ghost LVDS panels and not
failing for laptops.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Dave Airlie <airlied@linux.ie>
Signed-off-by: Keith Packard <keithp@keithp.com>

diff --git a/drivers/gpu/drm/i915/intel_lvds.c b/drivers/gpu/drm/i915/intel_lvds.c
index 86cd30b..a562bd2 100644
--- a/drivers/gpu/drm/i915/intel_lvds.c
+++ b/drivers/gpu/drm/i915/intel_lvds.c
@@ -829,25 +829,6 @@ static bool lvds_is_present_in_vbt(struct drm_device *dev,
 	return false;
 }
 
-static bool intel_lvds_ddc_probe(struct drm_device *dev, u8 pin)
-{
-	struct drm_i915_private *dev_priv = dev->dev_private;
-	u8 buf = 0;
-	struct i2c_msg msgs[] = {
-		{
-			.addr = 0xA0,
-			.flags = 0,
-			.len = 1,
-			.buf = &buf,
-		},
-	};
-	struct i2c_adapter *i2c = &dev_priv->gmbus[pin].adapter;
-	/* XXX this only appears to work when using GMBUS */
-	if (intel_gmbus_is_forced_bit(i2c))
-		return true;
-	return i2c_transfer(i2c, msgs, 1) == 1;
-}
-
 /**
  * intel_lvds_init - setup LVDS connectors on this device
  * @dev: drm device
@@ -888,11 +869,6 @@ bool intel_lvds_init(struct drm_device *dev)
 		}
 	}
 
-	if (!intel_lvds_ddc_probe(dev, pin)) {
-		DRM_DEBUG_KMS("LVDS did not respond to DDC probe\n");
-		return false;
-	}
-
 	intel_lvds = kzalloc(sizeof(struct intel_lvds), GFP_KERNEL);
 	if (!intel_lvds) {
 		return false;
-- 
cgit v0.10.2


From 8182924bc5850281985d73c312876746acd390b5 Mon Sep 17 00:00:00 2001
From: Jens Axboe <jaxboe@fusionio.com>
Date: Wed, 30 Mar 2011 09:51:33 +0200
Subject: block: dump request state on seeing a corrupted request completion

Currently we just dump a non-informative 'request botched' message.
Lets actually try and print something sane to help debug issues
around this.

Signed-off-by: Jens Axboe <jaxboe@fusionio.com>

diff --git a/block/blk-core.c b/block/blk-core.c
index e0a0623..4fdf895 100644
--- a/block/blk-core.c
+++ b/block/blk-core.c
@@ -2163,7 +2163,7 @@ bool blk_update_request(struct request *req, int error, unsigned int nr_bytes)
 	 * size, something has gone terribly wrong.
 	 */
 	if (blk_rq_bytes(req) < blk_rq_cur_bytes(req)) {
-		printk(KERN_ERR "blk: request botched\n");
+		blk_dump_rq_flags(req, "request botched");
 		req->__data_len = blk_rq_cur_bytes(req);
 	}
 
-- 
cgit v0.10.2


From b710a480554f2be682bac3cb59b0e085ba3d644b Mon Sep 17 00:00:00 2001
From: Jens Axboe <jaxboe@fusionio.com>
Date: Wed, 30 Mar 2011 09:52:30 +0200
Subject: block: get rid of elv_insert() interface

Merge it with __elv_add_request(), it's pretty pointless to
have a function with only two callers. The main interface
is elv_add_request()/__elv_add_request().

Signed-off-by: Jens Axboe <jaxboe@fusionio.com>

diff --git a/block/blk-flush.c b/block/blk-flush.c
index 93d5fd8..d6275cb 100644
--- a/block/blk-flush.c
+++ b/block/blk-flush.c
@@ -261,7 +261,7 @@ static bool blk_kick_flush(struct request_queue *q)
 	q->flush_rq.end_io = flush_end_io;
 
 	q->flush_pending_idx ^= 1;
-	elv_insert(q, &q->flush_rq, ELEVATOR_INSERT_REQUEUE);
+	__elv_add_request(q, &q->flush_rq, ELEVATOR_INSERT_REQUEUE);
 	return true;
 }
 
@@ -281,7 +281,7 @@ static void flush_data_end_io(struct request *rq, int error)
  * blk_insert_flush - insert a new FLUSH/FUA request
  * @rq: request to insert
  *
- * To be called from elv_insert() for %ELEVATOR_INSERT_FLUSH insertions.
+ * To be called from __elv_add_request() for %ELEVATOR_INSERT_FLUSH insertions.
  * @rq is being submitted.  Analyze what needs to be done and put it on the
  * right queue.
  *
diff --git a/block/elevator.c b/block/elevator.c
index c387d31..0cdb4e7 100644
--- a/block/elevator.c
+++ b/block/elevator.c
@@ -610,7 +610,7 @@ void elv_requeue_request(struct request_queue *q, struct request *rq)
 
 	rq->cmd_flags &= ~REQ_STARTED;
 
-	elv_insert(q, rq, ELEVATOR_INSERT_REQUEUE);
+	__elv_add_request(q, rq, ELEVATOR_INSERT_REQUEUE);
 }
 
 void elv_drain_elevator(struct request_queue *q)
@@ -655,12 +655,25 @@ void elv_quiesce_end(struct request_queue *q)
 	queue_flag_clear(QUEUE_FLAG_ELVSWITCH, q);
 }
 
-void elv_insert(struct request_queue *q, struct request *rq, int where)
+void __elv_add_request(struct request_queue *q, struct request *rq, int where)
 {
 	trace_block_rq_insert(q, rq);
 
 	rq->q = q;
 
+	BUG_ON(rq->cmd_flags & REQ_ON_PLUG);
+
+	if (rq->cmd_flags & REQ_SOFTBARRIER) {
+		/* barriers are scheduling boundary, update end_sector */
+		if (rq->cmd_type == REQ_TYPE_FS ||
+		    (rq->cmd_flags & REQ_DISCARD)) {
+			q->end_sector = rq_end_sector(rq);
+			q->boundary_rq = rq;
+		}
+	} else if (!(rq->cmd_flags & REQ_ELVPRIV) &&
+		    where == ELEVATOR_INSERT_SORT)
+		where = ELEVATOR_INSERT_BACK;
+
 	switch (where) {
 	case ELEVATOR_INSERT_REQUEUE:
 	case ELEVATOR_INSERT_FRONT:
@@ -722,24 +735,6 @@ void elv_insert(struct request_queue *q, struct request *rq, int where)
 		BUG();
 	}
 }
-
-void __elv_add_request(struct request_queue *q, struct request *rq, int where)
-{
-	BUG_ON(rq->cmd_flags & REQ_ON_PLUG);
-
-	if (rq->cmd_flags & REQ_SOFTBARRIER) {
-		/* barriers are scheduling boundary, update end_sector */
-		if (rq->cmd_type == REQ_TYPE_FS ||
-		    (rq->cmd_flags & REQ_DISCARD)) {
-			q->end_sector = rq_end_sector(rq);
-			q->boundary_rq = rq;
-		}
-	} else if (!(rq->cmd_flags & REQ_ELVPRIV) &&
-		    where == ELEVATOR_INSERT_SORT)
-		where = ELEVATOR_INSERT_BACK;
-
-	elv_insert(q, rq, where);
-}
 EXPORT_SYMBOL(__elv_add_request);
 
 void elv_add_request(struct request_queue *q, struct request *rq, int where)
diff --git a/include/linux/elevator.h b/include/linux/elevator.h
index d93efcc445..21a8ebf 100644
--- a/include/linux/elevator.h
+++ b/include/linux/elevator.h
@@ -101,7 +101,6 @@ extern void elv_dispatch_sort(struct request_queue *, struct request *);
 extern void elv_dispatch_add_tail(struct request_queue *, struct request *);
 extern void elv_add_request(struct request_queue *, struct request *, int);
 extern void __elv_add_request(struct request_queue *, struct request *, int);
-extern void elv_insert(struct request_queue *, struct request *, int);
 extern int elv_merge(struct request_queue *, struct request **, struct bio *);
 extern int elv_try_merge(struct request *, struct bio *);
 extern void elv_merge_requests(struct request_queue *, struct request *,
-- 
cgit v0.10.2


From 53d63e6b0dfb95882ec0219ba6bbd50cde423794 Mon Sep 17 00:00:00 2001
From: Jens Axboe <jaxboe@fusionio.com>
Date: Wed, 30 Mar 2011 13:27:09 +0200
Subject: block: make the flush insertion use the tail of the dispatch list

It's not a preempt type request, in fact we have to insert it
behind requests that do specify INSERT_FRONT.

Signed-off-by: Jens Axboe <jaxboe@fusionio.com>

diff --git a/block/blk-flush.c b/block/blk-flush.c
index d6275cb..eba4a27 100644
--- a/block/blk-flush.c
+++ b/block/blk-flush.c
@@ -261,7 +261,7 @@ static bool blk_kick_flush(struct request_queue *q)
 	q->flush_rq.end_io = flush_end_io;
 
 	q->flush_pending_idx ^= 1;
-	__elv_add_request(q, &q->flush_rq, ELEVATOR_INSERT_REQUEUE);
+	list_add_tail(&q->flush_rq.queuelist, &q->queue_head);
 	return true;
 }
 
@@ -312,7 +312,7 @@ void blk_insert_flush(struct request *rq)
 	 */
 	if ((policy & REQ_FSEQ_DATA) &&
 	    !(policy & (REQ_FSEQ_PREFLUSH | REQ_FSEQ_POSTFLUSH))) {
-		list_add(&rq->queuelist, &q->queue_head);
+		list_add_tail(&rq->queuelist, &q->queue_head);
 		return;
 	}
 
-- 
cgit v0.10.2


From ee3dea3549444e6e76d27af48b4929983e6f023c Mon Sep 17 00:00:00 2001
From: Christoph Hellwig <hch@lst.de>
Date: Wed, 30 Mar 2011 12:17:43 +0200
Subject: ufs: remove unessecary blk_flush_plug

We already flush the per-process plugging list when context switching,
so a blk_flush_plug call just before a yield() is not needed.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>

diff --git a/fs/ufs/truncate.c b/fs/ufs/truncate.c
index 1101430..5f821db 100644
--- a/fs/ufs/truncate.c
+++ b/fs/ufs/truncate.c
@@ -479,7 +479,6 @@ int ufs_truncate(struct inode *inode, loff_t old_i_size)
 			break;
 		if (IS_SYNC(inode) && (inode->i_state & I_DIRTY))
 			ufs_sync_inode (inode);
-		blk_flush_plug(current);
 		yield();
 	}
 
-- 
cgit v0.10.2


From 6f0379377047b18103b88ce33c03e5b19747ae57 Mon Sep 17 00:00:00 2001
From: Andreas Schwab <schwab@linux-m68k.org>
Date: Wed, 30 Mar 2011 12:21:56 +0200
Subject: blk-throttle: don't call xchg on bool

xchg does not work portably with smaller than 32bit types.

Signed-off-by: Andreas Schwab <schwab@linux-m68k.org>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>

diff --git a/block/blk-throttle.c b/block/blk-throttle.c
index 5352bda..6c98cfe 100644
--- a/block/blk-throttle.c
+++ b/block/blk-throttle.c
@@ -77,7 +77,7 @@ struct throtl_grp {
 	unsigned long slice_end[2];
 
 	/* Some throttle limits got updated for the group */
-	bool limits_changed;
+	int limits_changed;
 };
 
 struct throtl_data
@@ -102,7 +102,7 @@ struct throtl_data
 	/* Work for dispatching throttled bios */
 	struct delayed_work throtl_work;
 
-	bool limits_changed;
+	int limits_changed;
 };
 
 enum tg_state_flags {
-- 
cgit v0.10.2


From 929e27252e8ca69363f81f26af5eaba62cb4c572 Mon Sep 17 00:00:00 2001
From: Jens Axboe <jaxboe@fusionio.com>
Date: Wed, 30 Mar 2011 12:22:23 +0200
Subject: ide: ide_requeue_and_plug() reinstate "always plug" behaviour

We see stalls if we don't always ensure that the queue gets run
again. Even if rq == NULL, we could have other pending requests
in the queue.

Signed-off-by: Jens Axboe <jaxboe@fusionio.com>

diff --git a/drivers/ide/ide-io.c b/drivers/ide/ide-io.c
index 0e406d73..ca27d30 100644
--- a/drivers/ide/ide-io.c
+++ b/drivers/ide/ide-io.c
@@ -570,8 +570,7 @@ void ide_requeue_and_plug(ide_drive_t *drive, struct request *rq)
 	spin_unlock_irqrestore(q->queue_lock, flags);
 
 	/* Use 3ms as that was the old plug delay */
-	if (rq)
-		blk_delay_queue(q, 3);
+	blk_delay_queue(q, 3);
 }
 
 static int drive_is_ready(ide_drive_t *drive)
-- 
cgit v0.10.2


From 7dcda1c96d7c643101d4a05579ef4512a4baa7ef Mon Sep 17 00:00:00 2001
From: Jens Axboe <jaxboe@fusionio.com>
Date: Tue, 5 Apr 2011 23:51:48 +0200
Subject: fs: export empty_aops

With the ->sync_page() hook gone, we have a few users that
add their own static address_space_operations without any
functions defined.

fs/inode.c already has an empty_aops that it uses for init
purposes. Lets export that and use it in the places where
an otherwise empty aops was defined.

Signed-off-by: Jens Axboe <jaxboe@fusionio.com>

diff --git a/fs/inode.c b/fs/inode.c
index 5f4e11a..33c963d 100644
--- a/fs/inode.c
+++ b/fs/inode.c
@@ -125,6 +125,14 @@ __cacheline_aligned_in_smp DEFINE_SPINLOCK(inode_wb_list_lock);
 static DECLARE_RWSEM(iprune_sem);
 
 /*
+ * Empty aops. Can be used for the cases where the user does not
+ * define any of the address_space operations.
+ */
+const struct address_space_operations empty_aops = {
+};
+EXPORT_SYMBOL(empty_aops);
+
+/*
  * Statistics gathering..
  */
 struct inodes_stat_t inodes_stat;
@@ -176,7 +184,6 @@ int proc_nr_inodes(ctl_table *table, int write,
  */
 int inode_init_always(struct super_block *sb, struct inode *inode)
 {
-	static const struct address_space_operations empty_aops;
 	static const struct inode_operations empty_iops;
 	static const struct file_operations empty_fops;
 	struct address_space *const mapping = &inode->i_data;
diff --git a/fs/nilfs2/page.c b/fs/nilfs2/page.c
index 9d2dc6b..1168059 100644
--- a/fs/nilfs2/page.c
+++ b/fs/nilfs2/page.c
@@ -495,8 +495,6 @@ unsigned nilfs_page_count_clean_buffers(struct page *page,
 void nilfs_mapping_init(struct address_space *mapping,
 			struct backing_dev_info *bdi)
 {
-	static const struct address_space_operations empty_aops;
-
 	mapping->host = NULL;
 	mapping->flags = 0;
 	mapping_set_gfp_mask(mapping, GFP_NOFS);
diff --git a/fs/ubifs/xattr.c b/fs/ubifs/xattr.c
index c74400f..3299f46 100644
--- a/fs/ubifs/xattr.c
+++ b/fs/ubifs/xattr.c
@@ -56,6 +56,7 @@
  */
 
 #include "ubifs.h"
+#include <linux/fs.h>
 #include <linux/slab.h>
 #include <linux/xattr.h>
 #include <linux/posix_acl_xattr.h>
@@ -80,7 +81,6 @@ enum {
 };
 
 static const struct inode_operations none_inode_operations;
-static const struct address_space_operations none_address_operations;
 static const struct file_operations none_file_operations;
 
 /**
@@ -130,7 +130,7 @@ static int create_xattr(struct ubifs_info *c, struct inode *host,
 	}
 
 	/* Re-define all operations to be "nothing" */
-	inode->i_mapping->a_ops = &none_address_operations;
+	inode->i_mapping->a_ops = &empty_aops;
 	inode->i_op = &none_inode_operations;
 	inode->i_fop = &none_file_operations;
 
diff --git a/include/linux/fs.h b/include/linux/fs.h
index 52f283c..1b95af3 100644
--- a/include/linux/fs.h
+++ b/include/linux/fs.h
@@ -613,6 +613,8 @@ struct address_space_operations {
 	int (*error_remove_page)(struct address_space *, struct page *);
 };
 
+extern const struct address_space_operations empty_aops;
+
 /*
  * pagecache_write_begin/pagecache_write_end must be used by general code
  * to write into the pagecache.
-- 
cgit v0.10.2


From a63a5cf84dac7a23a57c800eea5734701e7d3c04 Mon Sep 17 00:00:00 2001
From: Mike Snitzer <snitzer@redhat.com>
Date: Fri, 1 Apr 2011 21:02:31 +0200
Subject: dm: improve block integrity support

The current block integrity (DIF/DIX) support in DM is verifying that
all devices' integrity profiles match during DM device resume (which
is past the point of no return).  To some degree that is unavoidable
(stacked DM devices force this late checking).  But for most DM
devices (which aren't stacking on other DM devices) the ideal time to
verify all integrity profiles match is during table load.

Introduce the notion of an "initialized" integrity profile: a profile
that was blk_integrity_register()'d with a non-NULL 'blk_integrity'
template.  Add blk_integrity_is_initialized() to allow checking if a
profile was initialized.

Update DM integrity support to:
- check all devices with _initialized_ integrity profiles match
  during table load; uninitialized profiles (e.g. for underlying DM
  device(s) of a stacked DM device) are ignored.
- disallow a table load that would result in an integrity profile that
  conflicts with a DM device's existing (in-use) integrity profile
- avoid clearing an existing integrity profile
- validate all integrity profiles match during resume; but if they
  don't all we can do is report the mismatch (during resume we're past
  the point of no return)

Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>

diff --git a/block/blk-integrity.c b/block/blk-integrity.c
index 54bcba6..129b9e2 100644
--- a/block/blk-integrity.c
+++ b/block/blk-integrity.c
@@ -30,6 +30,8 @@
 
 static struct kmem_cache *integrity_cachep;
 
+static const char *bi_unsupported_name = "unsupported";
+
 /**
  * blk_rq_count_integrity_sg - Count number of integrity scatterlist elements
  * @q:		request queue
@@ -358,6 +360,14 @@ static struct kobj_type integrity_ktype = {
 	.release	= blk_integrity_release,
 };
 
+bool blk_integrity_is_initialized(struct gendisk *disk)
+{
+	struct blk_integrity *bi = blk_get_integrity(disk);
+
+	return (bi && bi->name && strcmp(bi->name, bi_unsupported_name) != 0);
+}
+EXPORT_SYMBOL(blk_integrity_is_initialized);
+
 /**
  * blk_integrity_register - Register a gendisk as being integrity-capable
  * @disk:	struct gendisk pointer to make integrity-aware
@@ -407,7 +417,7 @@ int blk_integrity_register(struct gendisk *disk, struct blk_integrity *template)
 		bi->get_tag_fn = template->get_tag_fn;
 		bi->tag_size = template->tag_size;
 	} else
-		bi->name = "unsupported";
+		bi->name = bi_unsupported_name;
 
 	return 0;
 }
diff --git a/drivers/md/dm-table.c b/drivers/md/dm-table.c
index 416d4e2..cb8380c 100644
--- a/drivers/md/dm-table.c
+++ b/drivers/md/dm-table.c
@@ -927,20 +927,80 @@ static int dm_table_build_index(struct dm_table *t)
 }
 
 /*
+ * Get a disk whose integrity profile reflects the table's profile.
+ * If %match_all is true, all devices' profiles must match.
+ * If %match_all is false, all devices must at least have an
+ * allocated integrity profile; but uninitialized is ok.
+ * Returns NULL if integrity support was inconsistent or unavailable.
+ */
+static struct gendisk * dm_table_get_integrity_disk(struct dm_table *t,
+						    bool match_all)
+{
+	struct list_head *devices = dm_table_get_devices(t);
+	struct dm_dev_internal *dd = NULL;
+	struct gendisk *prev_disk = NULL, *template_disk = NULL;
+
+	list_for_each_entry(dd, devices, list) {
+		template_disk = dd->dm_dev.bdev->bd_disk;
+		if (!blk_get_integrity(template_disk))
+			goto no_integrity;
+		if (!match_all && !blk_integrity_is_initialized(template_disk))
+			continue; /* skip uninitialized profiles */
+		else if (prev_disk &&
+			 blk_integrity_compare(prev_disk, template_disk) < 0)
+			goto no_integrity;
+		prev_disk = template_disk;
+	}
+
+	return template_disk;
+
+no_integrity:
+	if (prev_disk)
+		DMWARN("%s: integrity not set: %s and %s profile mismatch",
+		       dm_device_name(t->md),
+		       prev_disk->disk_name,
+		       template_disk->disk_name);
+	return NULL;
+}
+
+/*
  * Register the mapped device for blk_integrity support if
- * the underlying devices support it.
+ * the underlying devices have an integrity profile.  But all devices
+ * may not have matching profiles (checking all devices isn't reliable
+ * during table load because this table may use other DM device(s) which
+ * must be resumed before they will have an initialized integity profile).
+ * Stacked DM devices force a 2 stage integrity profile validation:
+ * 1 - during load, validate all initialized integrity profiles match
+ * 2 - during resume, validate all integrity profiles match
  */
 static int dm_table_prealloc_integrity(struct dm_table *t, struct mapped_device *md)
 {
-	struct list_head *devices = dm_table_get_devices(t);
-	struct dm_dev_internal *dd;
+	struct gendisk *template_disk = NULL;
 
-	list_for_each_entry(dd, devices, list)
-		if (bdev_get_integrity(dd->dm_dev.bdev)) {
-			t->integrity_supported = 1;
-			return blk_integrity_register(dm_disk(md), NULL);
-		}
+	template_disk = dm_table_get_integrity_disk(t, false);
+	if (!template_disk)
+		return 0;
 
+	if (!blk_integrity_is_initialized(dm_disk(md))) {
+		t->integrity_supported = 1;
+		return blk_integrity_register(dm_disk(md), NULL);
+	}
+
+	/*
+	 * If DM device already has an initalized integrity
+	 * profile the new profile should not conflict.
+	 */
+	if (blk_integrity_is_initialized(template_disk) &&
+	    blk_integrity_compare(dm_disk(md), template_disk) < 0) {
+		DMWARN("%s: conflict with existing integrity profile: "
+		       "%s profile mismatch",
+		       dm_device_name(t->md),
+		       template_disk->disk_name);
+		return 1;
+	}
+
+	/* Preserve existing initialized integrity profile */
+	t->integrity_supported = 1;
 	return 0;
 }
 
@@ -1094,41 +1154,27 @@ combine_limits:
 
 /*
  * Set the integrity profile for this device if all devices used have
- * matching profiles.
+ * matching profiles.  We're quite deep in the resume path but still
+ * don't know if all devices (particularly DM devices this device
+ * may be stacked on) have matching profiles.  Even if the profiles
+ * don't match we have no way to fail (to resume) at this point.
  */
 static void dm_table_set_integrity(struct dm_table *t)
 {
-	struct list_head *devices = dm_table_get_devices(t);
-	struct dm_dev_internal *prev = NULL, *dd = NULL;
+	struct gendisk *template_disk = NULL;
 
 	if (!blk_get_integrity(dm_disk(t->md)))
 		return;
 
-	list_for_each_entry(dd, devices, list) {
-		if (prev &&
-		    blk_integrity_compare(prev->dm_dev.bdev->bd_disk,
-					  dd->dm_dev.bdev->bd_disk) < 0) {
-			DMWARN("%s: integrity not set: %s and %s mismatch",
-			       dm_device_name(t->md),
-			       prev->dm_dev.bdev->bd_disk->disk_name,
-			       dd->dm_dev.bdev->bd_disk->disk_name);
-			goto no_integrity;
-		}
-		prev = dd;
+	template_disk = dm_table_get_integrity_disk(t, true);
+	if (!template_disk &&
+	    blk_integrity_is_initialized(dm_disk(t->md))) {
+		DMWARN("%s: device no longer has a valid integrity profile",
+		       dm_device_name(t->md));
+		return;
 	}
-
-	if (!prev || !bdev_get_integrity(prev->dm_dev.bdev))
-		goto no_integrity;
-
 	blk_integrity_register(dm_disk(t->md),
-			       bdev_get_integrity(prev->dm_dev.bdev));
-
-	return;
-
-no_integrity:
-	blk_integrity_register(dm_disk(t->md), NULL);
-
-	return;
+			       blk_get_integrity(template_disk));
 }
 
 void dm_table_set_restrictions(struct dm_table *t, struct request_queue *q,
diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h
index 16a902f..32176cc 100644
--- a/include/linux/blkdev.h
+++ b/include/linux/blkdev.h
@@ -1206,6 +1206,7 @@ struct blk_integrity {
 	struct kobject		kobj;
 };
 
+extern bool blk_integrity_is_initialized(struct gendisk *);
 extern int blk_integrity_register(struct gendisk *, struct blk_integrity *);
 extern void blk_integrity_unregister(struct gendisk *);
 extern int blk_integrity_compare(struct gendisk *, struct gendisk *);
@@ -1262,6 +1263,7 @@ queue_max_integrity_segments(struct request_queue *q)
 #define queue_max_integrity_segments(a)		(0)
 #define blk_integrity_merge_rq(a, b, c)		(0)
 #define blk_integrity_merge_bio(a, b, c)	(0)
+#define blk_integrity_is_initialized(a)		(0)
 
 #endif /* CONFIG_BLK_DEV_INTEGRITY */
 
-- 
cgit v0.10.2


From f83e826181f7f8fb152e4190d03854fc3a5dd040 Mon Sep 17 00:00:00 2001
From: Konstantin Khlebnikov <khlebnikov@openvz.org>
Date: Mon, 4 Apr 2011 00:15:02 +0200
Subject: block: fix request sorting at unplug

Comparison function for list_sort() must be anticommutative,
otherwise it is not sorting in ordinary meaning.

But fortunately list_sort() always check ((*cmp)(priv, a, b) <= 0)
it not distinguish negative and zero, so comparison function can
implement only less-or-equal instead of full three-way comparison.

Signed-off-by: Konstantin Khlebnikov <khlebnikov@openvz.org>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>

diff --git a/block/blk-core.c b/block/blk-core.c
index 4fdf895..725091d 100644
--- a/block/blk-core.c
+++ b/block/blk-core.c
@@ -2665,7 +2665,7 @@ static int plug_rq_cmp(void *priv, struct list_head *a, struct list_head *b)
 	struct request *rqa = container_of(a, struct request, queuelist);
 	struct request *rqb = container_of(b, struct request, queuelist);
 
-	return !(rqa->q == rqb->q);
+	return !(rqa->q <= rqb->q);
 }
 
 static void flush_plug_list(struct blk_plug *plug)
-- 
cgit v0.10.2


From 782b86e2656762382ae1c2686d8d5c91f7d5eacf Mon Sep 17 00:00:00 2001
From: Jens Axboe <jaxboe@fusionio.com>
Date: Tue, 5 Apr 2011 03:29:57 +0200
Subject: ide: always ensure that blk_delay_queue() is called if we have
 pending IO

Just because we are not requeuing a request does not mean that
some aren't pending. So always issue a blk_delay_queue() if
either we are requeueing OR there's pending IO.

This fixes a boot problem for some IDE boxes.

Signed-off-by: Jens Axboe <jaxboe@fusionio.com>

diff --git a/drivers/ide/ide-io.c b/drivers/ide/ide-io.c
index ca27d30..177db6d 100644
--- a/drivers/ide/ide-io.c
+++ b/drivers/ide/ide-io.c
@@ -430,6 +430,26 @@ static inline void ide_unlock_host(struct ide_host *host)
 	}
 }
 
+static void __ide_requeue_and_plug(struct request_queue *q, struct request *rq)
+{
+	if (rq)
+		blk_requeue_request(q, rq);
+	if (rq || blk_peek_request(q)) {
+		/* Use 3ms as that was the old plug delay */
+		blk_delay_queue(q, 3);
+	}
+}
+
+void ide_requeue_and_plug(ide_drive_t *drive, struct request *rq)
+{
+	struct request_queue *q = drive->queue;
+	unsigned long flags;
+
+	spin_lock_irqsave(q->queue_lock, flags);
+	__ide_requeue_and_plug(q, rq);
+	spin_unlock_irqrestore(q->queue_lock, flags);
+}
+
 /*
  * Issue a new request to a device.
  */
@@ -550,27 +570,7 @@ plug_device:
 	ide_unlock_host(host);
 plug_device_2:
 	spin_lock_irq(q->queue_lock);
-
-	if (rq) {
-		blk_requeue_request(q, rq);
-		blk_delay_queue(q, queue_run_ms);
-	}
-}
-
-void ide_requeue_and_plug(ide_drive_t *drive, struct request *rq)
-{
-	struct request_queue *q = drive->queue;
-	unsigned long flags;
-
-	spin_lock_irqsave(q->queue_lock, flags);
-
-	if (rq)
-		blk_requeue_request(q, rq);
-
-	spin_unlock_irqrestore(q->queue_lock, flags);
-
-	/* Use 3ms as that was the old plug delay */
-	blk_delay_queue(q, 3);
+	__ide_requeue_and_plug(q, rq);
 }
 
 static int drive_is_ready(ide_drive_t *drive)
-- 
cgit v0.10.2


From d0de4dc584ec6aa3b26fffea320a8457827768fc Mon Sep 17 00:00:00 2001
From: Eric Paris <eparis@redhat.com>
Date: Tue, 5 Apr 2011 17:20:50 -0400
Subject: inotify: fix double free/corruption of stuct user

On an error path in inotify_init1 a normal user can trigger a double
free of struct user.  This is a regression introduced by a2ae4cc9a16e
("inotify: stop kernel memory leak on file creation failure").

We fix this by making sure that if a group exists the user reference is
dropped when the group is cleaned up.  We should not explictly drop the
reference on error and also drop the reference when the group is cleaned
up.

The new lifetime rules are that an inotify group lives from
inotify_new_group to the last fsnotify_put_group.  Since the struct user
and inotify_devs are directly tied to this lifetime they are only
changed/updated in those two locations.  We get rid of all special
casing of struct user or user->inotify_devs.

Signed-off-by: Eric Paris <eparis@redhat.com>
Cc: stable@kernel.org (2.6.37 and up)
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

diff --git a/fs/notify/inotify/inotify_fsnotify.c b/fs/notify/inotify/inotify_fsnotify.c
index a91b69a..0348d0c 100644
--- a/fs/notify/inotify/inotify_fsnotify.c
+++ b/fs/notify/inotify/inotify_fsnotify.c
@@ -198,6 +198,7 @@ static void inotify_free_group_priv(struct fsnotify_group *group)
 	idr_for_each(&group->inotify_data.idr, idr_callback, group);
 	idr_remove_all(&group->inotify_data.idr);
 	idr_destroy(&group->inotify_data.idr);
+	atomic_dec(&group->inotify_data.user->inotify_devs);
 	free_uid(group->inotify_data.user);
 }
 
diff --git a/fs/notify/inotify/inotify_user.c b/fs/notify/inotify/inotify_user.c
index bd46e7c..8445fbc 100644
--- a/fs/notify/inotify/inotify_user.c
+++ b/fs/notify/inotify/inotify_user.c
@@ -290,7 +290,6 @@ static int inotify_fasync(int fd, struct file *file, int on)
 static int inotify_release(struct inode *ignored, struct file *file)
 {
 	struct fsnotify_group *group = file->private_data;
-	struct user_struct *user = group->inotify_data.user;
 
 	pr_debug("%s: group=%p\n", __func__, group);
 
@@ -299,8 +298,6 @@ static int inotify_release(struct inode *ignored, struct file *file)
 	/* free this group, matching get was inotify_init->fsnotify_obtain_group */
 	fsnotify_put_group(group);
 
-	atomic_dec(&user->inotify_devs);
-
 	return 0;
 }
 
@@ -697,7 +694,7 @@ retry:
 	return ret;
 }
 
-static struct fsnotify_group *inotify_new_group(struct user_struct *user, unsigned int max_events)
+static struct fsnotify_group *inotify_new_group(unsigned int max_events)
 {
 	struct fsnotify_group *group;
 
@@ -710,8 +707,14 @@ static struct fsnotify_group *inotify_new_group(struct user_struct *user, unsign
 	spin_lock_init(&group->inotify_data.idr_lock);
 	idr_init(&group->inotify_data.idr);
 	group->inotify_data.last_wd = 0;
-	group->inotify_data.user = user;
 	group->inotify_data.fa = NULL;
+	group->inotify_data.user = get_current_user();
+
+	if (atomic_inc_return(&group->inotify_data.user->inotify_devs) >
+	    inotify_max_user_instances) {
+		fsnotify_put_group(group);
+		return ERR_PTR(-EMFILE);
+	}
 
 	return group;
 }
@@ -721,7 +724,6 @@ static struct fsnotify_group *inotify_new_group(struct user_struct *user, unsign
 SYSCALL_DEFINE1(inotify_init1, int, flags)
 {
 	struct fsnotify_group *group;
-	struct user_struct *user;
 	int ret;
 
 	/* Check the IN_* constants for consistency.  */
@@ -731,31 +733,16 @@ SYSCALL_DEFINE1(inotify_init1, int, flags)
 	if (flags & ~(IN_CLOEXEC | IN_NONBLOCK))
 		return -EINVAL;
 
-	user = get_current_user();
-	if (unlikely(atomic_read(&user->inotify_devs) >=
-			inotify_max_user_instances)) {
-		ret = -EMFILE;
-		goto out_free_uid;
-	}
-
 	/* fsnotify_obtain_group took a reference to group, we put this when we kill the file in the end */
-	group = inotify_new_group(user, inotify_max_queued_events);
-	if (IS_ERR(group)) {
-		ret = PTR_ERR(group);
-		goto out_free_uid;
-	}
-
-	atomic_inc(&user->inotify_devs);
+	group = inotify_new_group(inotify_max_queued_events);
+	if (IS_ERR(group))
+		return PTR_ERR(group);
 
 	ret = anon_inode_getfd("inotify", &inotify_fops, group,
 				  O_RDONLY | flags);
-	if (ret >= 0)
-		return ret;
+	if (ret < 0)
+		fsnotify_put_group(group);
 
-	fsnotify_put_group(group);
-	atomic_dec(&user->inotify_devs);
-out_free_uid:
-	free_uid(user);
 	return ret;
 }
 
-- 
cgit v0.10.2


From 6221f222c0ebf1acdf7abcf927178f40e1a65e2a Mon Sep 17 00:00:00 2001
From: Linus Torvalds <torvalds@linux-foundation.org>
Date: Tue, 5 Apr 2011 18:30:43 -0700
Subject: Linux 2.6.39-rc2


diff --git a/Makefile b/Makefile
index ba7a55c..8392b64 100644
--- a/Makefile
+++ b/Makefile
@@ -1,7 +1,7 @@
 VERSION = 2
 PATCHLEVEL = 6
 SUBLEVEL = 39
-EXTRAVERSION = -rc1
+EXTRAVERSION = -rc2
 NAME = Flesh-Eating Bats with Fangs
 
 # *DOCUMENTATION*
-- 
cgit v0.10.2