From b7be755733dc44c72956c91876e5d86c56052a54 Mon Sep 17 00:00:00 2001 From: Alec Leamas Date: Thu, 12 Nov 2015 16:03:00 -0200 Subject: [media] bz#75751: Move internal header file lirc.h to uapi/ The file include/media/lirc.h describes a public interface and should thus be a public header. See kernel bug https://bugzilla.kernel.org/show_bug.cgi?id=75751 which has a manpage describing the interface + an acknowledgment that this info belongs to uapi. Signed-off-by: Mauro Carvalho Chehab diff --git a/include/media/lirc.h b/include/media/lirc.h index 4b3ab29..554988c 100644 --- a/include/media/lirc.h +++ b/include/media/lirc.h @@ -1,168 +1 @@ -/* - * lirc.h - linux infrared remote control header file - * last modified 2010/07/13 by Jarod Wilson - */ - -#ifndef _LINUX_LIRC_H -#define _LINUX_LIRC_H - -#include -#include - -#define PULSE_BIT 0x01000000 -#define PULSE_MASK 0x00FFFFFF - -#define LIRC_MODE2_SPACE 0x00000000 -#define LIRC_MODE2_PULSE 0x01000000 -#define LIRC_MODE2_FREQUENCY 0x02000000 -#define LIRC_MODE2_TIMEOUT 0x03000000 - -#define LIRC_VALUE_MASK 0x00FFFFFF -#define LIRC_MODE2_MASK 0xFF000000 - -#define LIRC_SPACE(val) (((val)&LIRC_VALUE_MASK) | LIRC_MODE2_SPACE) -#define LIRC_PULSE(val) (((val)&LIRC_VALUE_MASK) | LIRC_MODE2_PULSE) -#define LIRC_FREQUENCY(val) (((val)&LIRC_VALUE_MASK) | LIRC_MODE2_FREQUENCY) -#define LIRC_TIMEOUT(val) (((val)&LIRC_VALUE_MASK) | LIRC_MODE2_TIMEOUT) - -#define LIRC_VALUE(val) ((val)&LIRC_VALUE_MASK) -#define LIRC_MODE2(val) ((val)&LIRC_MODE2_MASK) - -#define LIRC_IS_SPACE(val) (LIRC_MODE2(val) == LIRC_MODE2_SPACE) -#define LIRC_IS_PULSE(val) (LIRC_MODE2(val) == LIRC_MODE2_PULSE) -#define LIRC_IS_FREQUENCY(val) (LIRC_MODE2(val) == LIRC_MODE2_FREQUENCY) -#define LIRC_IS_TIMEOUT(val) (LIRC_MODE2(val) == LIRC_MODE2_TIMEOUT) - -/* used heavily by lirc userspace */ -#define lirc_t int - -/*** lirc compatible hardware features ***/ - -#define LIRC_MODE2SEND(x) (x) -#define LIRC_SEND2MODE(x) (x) -#define LIRC_MODE2REC(x) ((x) << 16) -#define LIRC_REC2MODE(x) ((x) >> 16) - -#define LIRC_MODE_RAW 0x00000001 -#define LIRC_MODE_PULSE 0x00000002 -#define LIRC_MODE_MODE2 0x00000004 -#define LIRC_MODE_LIRCCODE 0x00000010 - - -#define LIRC_CAN_SEND_RAW LIRC_MODE2SEND(LIRC_MODE_RAW) -#define LIRC_CAN_SEND_PULSE LIRC_MODE2SEND(LIRC_MODE_PULSE) -#define LIRC_CAN_SEND_MODE2 LIRC_MODE2SEND(LIRC_MODE_MODE2) -#define LIRC_CAN_SEND_LIRCCODE LIRC_MODE2SEND(LIRC_MODE_LIRCCODE) - -#define LIRC_CAN_SEND_MASK 0x0000003f - -#define LIRC_CAN_SET_SEND_CARRIER 0x00000100 -#define LIRC_CAN_SET_SEND_DUTY_CYCLE 0x00000200 -#define LIRC_CAN_SET_TRANSMITTER_MASK 0x00000400 - -#define LIRC_CAN_REC_RAW LIRC_MODE2REC(LIRC_MODE_RAW) -#define LIRC_CAN_REC_PULSE LIRC_MODE2REC(LIRC_MODE_PULSE) -#define LIRC_CAN_REC_MODE2 LIRC_MODE2REC(LIRC_MODE_MODE2) -#define LIRC_CAN_REC_LIRCCODE LIRC_MODE2REC(LIRC_MODE_LIRCCODE) - -#define LIRC_CAN_REC_MASK LIRC_MODE2REC(LIRC_CAN_SEND_MASK) - -#define LIRC_CAN_SET_REC_CARRIER (LIRC_CAN_SET_SEND_CARRIER << 16) -#define LIRC_CAN_SET_REC_DUTY_CYCLE (LIRC_CAN_SET_SEND_DUTY_CYCLE << 16) - -#define LIRC_CAN_SET_REC_DUTY_CYCLE_RANGE 0x40000000 -#define LIRC_CAN_SET_REC_CARRIER_RANGE 0x80000000 -#define LIRC_CAN_GET_REC_RESOLUTION 0x20000000 -#define LIRC_CAN_SET_REC_TIMEOUT 0x10000000 -#define LIRC_CAN_SET_REC_FILTER 0x08000000 - -#define LIRC_CAN_MEASURE_CARRIER 0x02000000 -#define LIRC_CAN_USE_WIDEBAND_RECEIVER 0x04000000 - -#define LIRC_CAN_SEND(x) ((x)&LIRC_CAN_SEND_MASK) -#define LIRC_CAN_REC(x) ((x)&LIRC_CAN_REC_MASK) - -#define LIRC_CAN_NOTIFY_DECODE 0x01000000 - -/*** IOCTL commands for lirc driver ***/ - -#define LIRC_GET_FEATURES _IOR('i', 0x00000000, __u32) - -#define LIRC_GET_SEND_MODE _IOR('i', 0x00000001, __u32) -#define LIRC_GET_REC_MODE _IOR('i', 0x00000002, __u32) -#define LIRC_GET_SEND_CARRIER _IOR('i', 0x00000003, __u32) -#define LIRC_GET_REC_CARRIER _IOR('i', 0x00000004, __u32) -#define LIRC_GET_SEND_DUTY_CYCLE _IOR('i', 0x00000005, __u32) -#define LIRC_GET_REC_DUTY_CYCLE _IOR('i', 0x00000006, __u32) -#define LIRC_GET_REC_RESOLUTION _IOR('i', 0x00000007, __u32) - -#define LIRC_GET_MIN_TIMEOUT _IOR('i', 0x00000008, __u32) -#define LIRC_GET_MAX_TIMEOUT _IOR('i', 0x00000009, __u32) - -#define LIRC_GET_MIN_FILTER_PULSE _IOR('i', 0x0000000a, __u32) -#define LIRC_GET_MAX_FILTER_PULSE _IOR('i', 0x0000000b, __u32) -#define LIRC_GET_MIN_FILTER_SPACE _IOR('i', 0x0000000c, __u32) -#define LIRC_GET_MAX_FILTER_SPACE _IOR('i', 0x0000000d, __u32) - -/* code length in bits, currently only for LIRC_MODE_LIRCCODE */ -#define LIRC_GET_LENGTH _IOR('i', 0x0000000f, __u32) - -#define LIRC_SET_SEND_MODE _IOW('i', 0x00000011, __u32) -#define LIRC_SET_REC_MODE _IOW('i', 0x00000012, __u32) -/* Note: these can reset the according pulse_width */ -#define LIRC_SET_SEND_CARRIER _IOW('i', 0x00000013, __u32) -#define LIRC_SET_REC_CARRIER _IOW('i', 0x00000014, __u32) -#define LIRC_SET_SEND_DUTY_CYCLE _IOW('i', 0x00000015, __u32) -#define LIRC_SET_REC_DUTY_CYCLE _IOW('i', 0x00000016, __u32) -#define LIRC_SET_TRANSMITTER_MASK _IOW('i', 0x00000017, __u32) - -/* - * when a timeout != 0 is set the driver will send a - * LIRC_MODE2_TIMEOUT data packet, otherwise LIRC_MODE2_TIMEOUT is - * never sent, timeout is disabled by default - */ -#define LIRC_SET_REC_TIMEOUT _IOW('i', 0x00000018, __u32) - -/* 1 enables, 0 disables timeout reports in MODE2 */ -#define LIRC_SET_REC_TIMEOUT_REPORTS _IOW('i', 0x00000019, __u32) - -/* - * pulses shorter than this are filtered out by hardware (software - * emulation in lirc_dev?) - */ -#define LIRC_SET_REC_FILTER_PULSE _IOW('i', 0x0000001a, __u32) -/* - * spaces shorter than this are filtered out by hardware (software - * emulation in lirc_dev?) - */ -#define LIRC_SET_REC_FILTER_SPACE _IOW('i', 0x0000001b, __u32) -/* - * if filter cannot be set independently for pulse/space, this should - * be used - */ -#define LIRC_SET_REC_FILTER _IOW('i', 0x0000001c, __u32) - -/* - * if enabled from the next key press on the driver will send - * LIRC_MODE2_FREQUENCY packets - */ -#define LIRC_SET_MEASURE_CARRIER_MODE _IOW('i', 0x0000001d, __u32) - -/* - * to set a range use - * LIRC_SET_REC_DUTY_CYCLE_RANGE/LIRC_SET_REC_CARRIER_RANGE with the - * lower bound first and later - * LIRC_SET_REC_DUTY_CYCLE/LIRC_SET_REC_CARRIER with the upper bound - */ - -#define LIRC_SET_REC_DUTY_CYCLE_RANGE _IOW('i', 0x0000001e, __u32) -#define LIRC_SET_REC_CARRIER_RANGE _IOW('i', 0x0000001f, __u32) - -#define LIRC_NOTIFY_DECODE _IO('i', 0x00000020) - -#define LIRC_SETUP_START _IO('i', 0x00000021) -#define LIRC_SETUP_END _IO('i', 0x00000022) - -#define LIRC_SET_WIDEBAND_RECEIVER _IOW('i', 0x00000023, __u32) - -#endif +#include diff --git a/include/uapi/linux/lirc.h b/include/uapi/linux/lirc.h new file mode 100644 index 0000000..4b3ab29 --- /dev/null +++ b/include/uapi/linux/lirc.h @@ -0,0 +1,168 @@ +/* + * lirc.h - linux infrared remote control header file + * last modified 2010/07/13 by Jarod Wilson + */ + +#ifndef _LINUX_LIRC_H +#define _LINUX_LIRC_H + +#include +#include + +#define PULSE_BIT 0x01000000 +#define PULSE_MASK 0x00FFFFFF + +#define LIRC_MODE2_SPACE 0x00000000 +#define LIRC_MODE2_PULSE 0x01000000 +#define LIRC_MODE2_FREQUENCY 0x02000000 +#define LIRC_MODE2_TIMEOUT 0x03000000 + +#define LIRC_VALUE_MASK 0x00FFFFFF +#define LIRC_MODE2_MASK 0xFF000000 + +#define LIRC_SPACE(val) (((val)&LIRC_VALUE_MASK) | LIRC_MODE2_SPACE) +#define LIRC_PULSE(val) (((val)&LIRC_VALUE_MASK) | LIRC_MODE2_PULSE) +#define LIRC_FREQUENCY(val) (((val)&LIRC_VALUE_MASK) | LIRC_MODE2_FREQUENCY) +#define LIRC_TIMEOUT(val) (((val)&LIRC_VALUE_MASK) | LIRC_MODE2_TIMEOUT) + +#define LIRC_VALUE(val) ((val)&LIRC_VALUE_MASK) +#define LIRC_MODE2(val) ((val)&LIRC_MODE2_MASK) + +#define LIRC_IS_SPACE(val) (LIRC_MODE2(val) == LIRC_MODE2_SPACE) +#define LIRC_IS_PULSE(val) (LIRC_MODE2(val) == LIRC_MODE2_PULSE) +#define LIRC_IS_FREQUENCY(val) (LIRC_MODE2(val) == LIRC_MODE2_FREQUENCY) +#define LIRC_IS_TIMEOUT(val) (LIRC_MODE2(val) == LIRC_MODE2_TIMEOUT) + +/* used heavily by lirc userspace */ +#define lirc_t int + +/*** lirc compatible hardware features ***/ + +#define LIRC_MODE2SEND(x) (x) +#define LIRC_SEND2MODE(x) (x) +#define LIRC_MODE2REC(x) ((x) << 16) +#define LIRC_REC2MODE(x) ((x) >> 16) + +#define LIRC_MODE_RAW 0x00000001 +#define LIRC_MODE_PULSE 0x00000002 +#define LIRC_MODE_MODE2 0x00000004 +#define LIRC_MODE_LIRCCODE 0x00000010 + + +#define LIRC_CAN_SEND_RAW LIRC_MODE2SEND(LIRC_MODE_RAW) +#define LIRC_CAN_SEND_PULSE LIRC_MODE2SEND(LIRC_MODE_PULSE) +#define LIRC_CAN_SEND_MODE2 LIRC_MODE2SEND(LIRC_MODE_MODE2) +#define LIRC_CAN_SEND_LIRCCODE LIRC_MODE2SEND(LIRC_MODE_LIRCCODE) + +#define LIRC_CAN_SEND_MASK 0x0000003f + +#define LIRC_CAN_SET_SEND_CARRIER 0x00000100 +#define LIRC_CAN_SET_SEND_DUTY_CYCLE 0x00000200 +#define LIRC_CAN_SET_TRANSMITTER_MASK 0x00000400 + +#define LIRC_CAN_REC_RAW LIRC_MODE2REC(LIRC_MODE_RAW) +#define LIRC_CAN_REC_PULSE LIRC_MODE2REC(LIRC_MODE_PULSE) +#define LIRC_CAN_REC_MODE2 LIRC_MODE2REC(LIRC_MODE_MODE2) +#define LIRC_CAN_REC_LIRCCODE LIRC_MODE2REC(LIRC_MODE_LIRCCODE) + +#define LIRC_CAN_REC_MASK LIRC_MODE2REC(LIRC_CAN_SEND_MASK) + +#define LIRC_CAN_SET_REC_CARRIER (LIRC_CAN_SET_SEND_CARRIER << 16) +#define LIRC_CAN_SET_REC_DUTY_CYCLE (LIRC_CAN_SET_SEND_DUTY_CYCLE << 16) + +#define LIRC_CAN_SET_REC_DUTY_CYCLE_RANGE 0x40000000 +#define LIRC_CAN_SET_REC_CARRIER_RANGE 0x80000000 +#define LIRC_CAN_GET_REC_RESOLUTION 0x20000000 +#define LIRC_CAN_SET_REC_TIMEOUT 0x10000000 +#define LIRC_CAN_SET_REC_FILTER 0x08000000 + +#define LIRC_CAN_MEASURE_CARRIER 0x02000000 +#define LIRC_CAN_USE_WIDEBAND_RECEIVER 0x04000000 + +#define LIRC_CAN_SEND(x) ((x)&LIRC_CAN_SEND_MASK) +#define LIRC_CAN_REC(x) ((x)&LIRC_CAN_REC_MASK) + +#define LIRC_CAN_NOTIFY_DECODE 0x01000000 + +/*** IOCTL commands for lirc driver ***/ + +#define LIRC_GET_FEATURES _IOR('i', 0x00000000, __u32) + +#define LIRC_GET_SEND_MODE _IOR('i', 0x00000001, __u32) +#define LIRC_GET_REC_MODE _IOR('i', 0x00000002, __u32) +#define LIRC_GET_SEND_CARRIER _IOR('i', 0x00000003, __u32) +#define LIRC_GET_REC_CARRIER _IOR('i', 0x00000004, __u32) +#define LIRC_GET_SEND_DUTY_CYCLE _IOR('i', 0x00000005, __u32) +#define LIRC_GET_REC_DUTY_CYCLE _IOR('i', 0x00000006, __u32) +#define LIRC_GET_REC_RESOLUTION _IOR('i', 0x00000007, __u32) + +#define LIRC_GET_MIN_TIMEOUT _IOR('i', 0x00000008, __u32) +#define LIRC_GET_MAX_TIMEOUT _IOR('i', 0x00000009, __u32) + +#define LIRC_GET_MIN_FILTER_PULSE _IOR('i', 0x0000000a, __u32) +#define LIRC_GET_MAX_FILTER_PULSE _IOR('i', 0x0000000b, __u32) +#define LIRC_GET_MIN_FILTER_SPACE _IOR('i', 0x0000000c, __u32) +#define LIRC_GET_MAX_FILTER_SPACE _IOR('i', 0x0000000d, __u32) + +/* code length in bits, currently only for LIRC_MODE_LIRCCODE */ +#define LIRC_GET_LENGTH _IOR('i', 0x0000000f, __u32) + +#define LIRC_SET_SEND_MODE _IOW('i', 0x00000011, __u32) +#define LIRC_SET_REC_MODE _IOW('i', 0x00000012, __u32) +/* Note: these can reset the according pulse_width */ +#define LIRC_SET_SEND_CARRIER _IOW('i', 0x00000013, __u32) +#define LIRC_SET_REC_CARRIER _IOW('i', 0x00000014, __u32) +#define LIRC_SET_SEND_DUTY_CYCLE _IOW('i', 0x00000015, __u32) +#define LIRC_SET_REC_DUTY_CYCLE _IOW('i', 0x00000016, __u32) +#define LIRC_SET_TRANSMITTER_MASK _IOW('i', 0x00000017, __u32) + +/* + * when a timeout != 0 is set the driver will send a + * LIRC_MODE2_TIMEOUT data packet, otherwise LIRC_MODE2_TIMEOUT is + * never sent, timeout is disabled by default + */ +#define LIRC_SET_REC_TIMEOUT _IOW('i', 0x00000018, __u32) + +/* 1 enables, 0 disables timeout reports in MODE2 */ +#define LIRC_SET_REC_TIMEOUT_REPORTS _IOW('i', 0x00000019, __u32) + +/* + * pulses shorter than this are filtered out by hardware (software + * emulation in lirc_dev?) + */ +#define LIRC_SET_REC_FILTER_PULSE _IOW('i', 0x0000001a, __u32) +/* + * spaces shorter than this are filtered out by hardware (software + * emulation in lirc_dev?) + */ +#define LIRC_SET_REC_FILTER_SPACE _IOW('i', 0x0000001b, __u32) +/* + * if filter cannot be set independently for pulse/space, this should + * be used + */ +#define LIRC_SET_REC_FILTER _IOW('i', 0x0000001c, __u32) + +/* + * if enabled from the next key press on the driver will send + * LIRC_MODE2_FREQUENCY packets + */ +#define LIRC_SET_MEASURE_CARRIER_MODE _IOW('i', 0x0000001d, __u32) + +/* + * to set a range use + * LIRC_SET_REC_DUTY_CYCLE_RANGE/LIRC_SET_REC_CARRIER_RANGE with the + * lower bound first and later + * LIRC_SET_REC_DUTY_CYCLE/LIRC_SET_REC_CARRIER with the upper bound + */ + +#define LIRC_SET_REC_DUTY_CYCLE_RANGE _IOW('i', 0x0000001e, __u32) +#define LIRC_SET_REC_CARRIER_RANGE _IOW('i', 0x0000001f, __u32) + +#define LIRC_NOTIFY_DECODE _IO('i', 0x00000020) + +#define LIRC_SETUP_START _IO('i', 0x00000021) +#define LIRC_SETUP_END _IO('i', 0x00000022) + +#define LIRC_SET_WIDEBAND_RECEIVER _IOW('i', 0x00000023, __u32) + +#endif -- cgit v0.10.2