From 9f37e90efaf0772b8f98bc347b9db77a3f0c27eb Mon Sep 17 00:00:00 2001 From: Tero Kristo Date: Tue, 3 Mar 2015 15:28:53 +0200 Subject: clk: ti: dflt: move support for default gate clock to clock driver With the legacy support gone, OMAP2+ default gate clock can be moved under clock driver. Create a new file for the purpose, and clean-up the header exports a bit as some clock APIs are no longer needed outside clock driver itself. Signed-off-by: Tero Kristo diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c index 6c17adf..38a336b 100644 --- a/arch/arm/mach-omap2/clock.c +++ b/arch/arm/mach-omap2/clock.c @@ -40,12 +40,6 @@ #include "cm-regbits-34xx.h" #include "common.h" -/* - * MAX_MODULE_ENABLE_WAIT: maximum of number of microseconds to wait - * for a module to indicate that it is no longer in idle - */ -#define MAX_MODULE_ENABLE_WAIT 100000 - u16 cpu_mask; /* DPLL valid Fint frequency band limits - from 34xx TRM Section 4.7.6.2 */ @@ -176,77 +170,6 @@ void __init omap2_clk_legacy_provider_init(int index, void __iomem *mem) /* Private functions */ - -/** - * _wait_idlest_generic - wait for a module to leave the idle state - * @clk: module clock to wait for (needed for register offsets) - * @reg: virtual address of module IDLEST register - * @mask: value to mask against to determine if the module is active - * @idlest: idle state indicator (0 or 1) for the clock - * @name: name of the clock (for printk) - * - * Wait for a module to leave idle, where its idle-status register is - * not inside the CM module. Returns 1 if the module left idle - * promptly, or 0 if the module did not leave idle before the timeout - * elapsed. XXX Deprecated - should be moved into drivers for the - * individual IP block that the IDLEST register exists in. - */ -static int _wait_idlest_generic(struct clk_hw_omap *clk, void __iomem *reg, - u32 mask, u8 idlest, const char *name) -{ - int i = 0, ena = 0; - - ena = (idlest) ? 0 : mask; - - omap_test_timeout(((omap2_clk_readl(clk, reg) & mask) == ena), - MAX_MODULE_ENABLE_WAIT, i); - - if (i < MAX_MODULE_ENABLE_WAIT) - pr_debug("omap clock: module associated with clock %s ready after %d loops\n", - name, i); - else - pr_err("omap clock: module associated with clock %s didn't enable in %d tries\n", - name, MAX_MODULE_ENABLE_WAIT); - - return (i < MAX_MODULE_ENABLE_WAIT) ? 1 : 0; -}; - -/** - * _omap2_module_wait_ready - wait for an OMAP module to leave IDLE - * @clk: struct clk * belonging to the module - * - * If the necessary clocks for the OMAP hardware IP block that - * corresponds to clock @clk are enabled, then wait for the module to - * indicate readiness (i.e., to leave IDLE). This code does not - * belong in the clock code and will be moved in the medium term to - * module-dependent code. No return value. - */ -static void _omap2_module_wait_ready(struct clk_hw_omap *clk) -{ - void __iomem *companion_reg, *idlest_reg; - u8 other_bit, idlest_bit, idlest_val, idlest_reg_id; - s16 prcm_mod; - int r; - - /* Not all modules have multiple clocks that their IDLEST depends on */ - if (clk->ops->find_companion) { - clk->ops->find_companion(clk, &companion_reg, &other_bit); - if (!(omap2_clk_readl(clk, companion_reg) & (1 << other_bit))) - return; - } - - clk->ops->find_idlest(clk, &idlest_reg, &idlest_bit, &idlest_val); - r = cm_split_idlest_reg(idlest_reg, &prcm_mod, &idlest_reg_id); - if (r) { - /* IDLEST register not in the CM module */ - _wait_idlest_generic(clk, idlest_reg, (1 << idlest_bit), - idlest_val, __clk_get_name(clk->hw.clk)); - } else { - omap_cm_wait_module_ready(0, prcm_mod, idlest_reg_id, - idlest_bit); - }; -} - /* Public functions */ /** @@ -280,174 +203,6 @@ void omap2_init_clk_clkdm(struct clk_hw *hw) } /** - * omap2_clk_dflt_find_companion - find companion clock to @clk - * @clk: struct clk * to find the companion clock of - * @other_reg: void __iomem ** to return the companion clock CM_*CLKEN va in - * @other_bit: u8 ** to return the companion clock bit shift in - * - * Note: We don't need special code here for INVERT_ENABLE for the - * time being since INVERT_ENABLE only applies to clocks enabled by - * CM_CLKEN_PLL - * - * Convert CM_ICLKEN* <-> CM_FCLKEN*. This conversion assumes it's - * just a matter of XORing the bits. - * - * Some clocks don't have companion clocks. For example, modules with - * only an interface clock (such as MAILBOXES) don't have a companion - * clock. Right now, this code relies on the hardware exporting a bit - * in the correct companion register that indicates that the - * nonexistent 'companion clock' is active. Future patches will - * associate this type of code with per-module data structures to - * avoid this issue, and remove the casts. No return value. - */ -void omap2_clk_dflt_find_companion(struct clk_hw_omap *clk, - void __iomem **other_reg, u8 *other_bit) -{ - u32 r; - - /* - * Convert CM_ICLKEN* <-> CM_FCLKEN*. This conversion assumes - * it's just a matter of XORing the bits. - */ - r = ((__force u32)clk->enable_reg ^ (CM_FCLKEN ^ CM_ICLKEN)); - - *other_reg = (__force void __iomem *)r; - *other_bit = clk->enable_bit; -} - -/** - * omap2_clk_dflt_find_idlest - find CM_IDLEST reg va, bit shift for @clk - * @clk: struct clk * to find IDLEST info for - * @idlest_reg: void __iomem ** to return the CM_IDLEST va in - * @idlest_bit: u8 * to return the CM_IDLEST bit shift in - * @idlest_val: u8 * to return the idle status indicator - * - * Return the CM_IDLEST register address and bit shift corresponding - * to the module that "owns" this clock. This default code assumes - * that the CM_IDLEST bit shift is the CM_*CLKEN bit shift, and that - * the IDLEST register address ID corresponds to the CM_*CLKEN - * register address ID (e.g., that CM_FCLKEN2 corresponds to - * CM_IDLEST2). This is not true for all modules. No return value. - */ -void omap2_clk_dflt_find_idlest(struct clk_hw_omap *clk, - void __iomem **idlest_reg, u8 *idlest_bit, u8 *idlest_val) -{ - u32 r; - - r = (((__force u32)clk->enable_reg & ~0xf0) | 0x20); - *idlest_reg = (__force void __iomem *)r; - *idlest_bit = clk->enable_bit; - - /* - * 24xx uses 0 to indicate not ready, and 1 to indicate ready. - * 34xx reverses this, just to keep us on our toes - * AM35xx uses both, depending on the module. - */ - *idlest_val = ti_clk_get_features()->cm_idlest_val; -} - -/** - * omap2_dflt_clk_enable - enable a clock in the hardware - * @hw: struct clk_hw * of the clock to enable - * - * Enable the clock @hw in the hardware. We first call into the OMAP - * clockdomain code to "enable" the corresponding clockdomain if this - * is the first enabled user of the clockdomain. Then program the - * hardware to enable the clock. Then wait for the IP block that uses - * this clock to leave idle (if applicable). Returns the error value - * from clkdm_clk_enable() if it terminated with an error, or -EINVAL - * if @hw has a null clock enable_reg, or zero upon success. - */ -int omap2_dflt_clk_enable(struct clk_hw *hw) -{ - struct clk_hw_omap *clk; - u32 v; - int ret = 0; - bool clkdm_control; - - if (ti_clk_get_features()->flags & TI_CLK_DISABLE_CLKDM_CONTROL) - clkdm_control = false; - else - clkdm_control = true; - - clk = to_clk_hw_omap(hw); - - if (clkdm_control && clk->clkdm) { - ret = clkdm_clk_enable(clk->clkdm, hw->clk); - if (ret) { - WARN(1, "%s: could not enable %s's clockdomain %s: %d\n", - __func__, __clk_get_name(hw->clk), - clk->clkdm->name, ret); - return ret; - } - } - - if (unlikely(clk->enable_reg == NULL)) { - pr_err("%s: %s missing enable_reg\n", __func__, - __clk_get_name(hw->clk)); - ret = -EINVAL; - goto err; - } - - /* FIXME should not have INVERT_ENABLE bit here */ - v = omap2_clk_readl(clk, clk->enable_reg); - if (clk->flags & INVERT_ENABLE) - v &= ~(1 << clk->enable_bit); - else - v |= (1 << clk->enable_bit); - omap2_clk_writel(v, clk, clk->enable_reg); - v = omap2_clk_readl(clk, clk->enable_reg); /* OCP barrier */ - - if (clk->ops && clk->ops->find_idlest) - _omap2_module_wait_ready(clk); - - return 0; - -err: - if (clkdm_control && clk->clkdm) - clkdm_clk_disable(clk->clkdm, hw->clk); - return ret; -} - -/** - * omap2_dflt_clk_disable - disable a clock in the hardware - * @hw: struct clk_hw * of the clock to disable - * - * Disable the clock @hw in the hardware, and call into the OMAP - * clockdomain code to "disable" the corresponding clockdomain if all - * clocks/hwmods in that clockdomain are now disabled. No return - * value. - */ -void omap2_dflt_clk_disable(struct clk_hw *hw) -{ - struct clk_hw_omap *clk; - u32 v; - - clk = to_clk_hw_omap(hw); - if (!clk->enable_reg) { - /* - * 'independent' here refers to a clock which is not - * controlled by its parent. - */ - pr_err("%s: independent clock %s has no enable_reg\n", - __func__, __clk_get_name(hw->clk)); - return; - } - - v = omap2_clk_readl(clk, clk->enable_reg); - if (clk->flags & INVERT_ENABLE) - v |= (1 << clk->enable_bit); - else - v &= ~(1 << clk->enable_bit); - omap2_clk_writel(v, clk, clk->enable_reg); - /* No OCP barrier needed here since it is a disable operation */ - - if (!(ti_clk_get_features()->flags & TI_CLK_DISABLE_CLKDM_CONTROL) && - clk->clkdm) - clkdm_clk_disable(clk->clkdm, hw->clk); -} - -/** * omap2_clkops_enable_clkdm - increment usecount on clkdm of @hw * @hw: struct clk_hw * of the clock being enabled * @@ -523,29 +278,6 @@ void omap2_clkops_disable_clkdm(struct clk_hw *hw) clkdm_clk_disable(clk->clkdm, hw->clk); } -/** - * omap2_dflt_clk_is_enabled - is clock enabled in the hardware? - * @hw: struct clk_hw * to check - * - * Return 1 if the clock represented by @hw is enabled in the - * hardware, or 0 otherwise. Intended for use in the struct - * clk_ops.is_enabled function pointer. - */ -int omap2_dflt_clk_is_enabled(struct clk_hw *hw) -{ - struct clk_hw_omap *clk = to_clk_hw_omap(hw); - u32 v; - - v = omap2_clk_readl(clk, clk->enable_reg); - - if (clk->flags & INVERT_ENABLE) - v ^= BIT(clk->enable_bit); - - v &= BIT(clk->enable_bit); - - return v ? 1 : 0; -} - static int __initdata mpurate; /* @@ -566,11 +298,6 @@ static int __init omap_clk_setup(char *str) } __setup("mpurate=", omap_clk_setup); -const struct clk_hw_omap_ops clkhwops_wait = { - .find_idlest = omap2_clk_dflt_find_idlest, - .find_companion = omap2_clk_dflt_find_companion, -}; - /** * omap2_clk_print_new_rates - print summary of current clock tree rates * @hfclkin_ck_name: clk name for the off-chip HF oscillator diff --git a/drivers/clk/ti/Makefile b/drivers/clk/ti/Makefile index 05a0294..9b93e69 100644 --- a/drivers/clk/ti/Makefile +++ b/drivers/clk/ti/Makefile @@ -1,7 +1,7 @@ obj-y += clk.o autoidle.o clockdomain.o clk-common = dpll.o composite.o divider.o gate.o \ fixed-factor.o mux.o apll.o \ - clkt_dpll.o clkt_iclk.o + clkt_dpll.o clkt_iclk.o clkt_dflt.o obj-$(CONFIG_SOC_AM33XX) += $(clk-common) clk-33xx.o dpll3xxx.o obj-$(CONFIG_SOC_TI81XX) += $(clk-common) fapll.o clk-816x.o obj-$(CONFIG_ARCH_OMAP2) += $(clk-common) interface.o clk-2xxx.o diff --git a/drivers/clk/ti/clkt_dflt.c b/drivers/clk/ti/clkt_dflt.c new file mode 100644 index 0000000..a176b8a --- /dev/null +++ b/drivers/clk/ti/clkt_dflt.c @@ -0,0 +1,316 @@ +/* + * Default clock type + * + * Copyright (C) 2005-2008, 2015 Texas Instruments, Inc. + * Copyright (C) 2004-2010 Nokia Corporation + * + * Contacts: + * Richard Woodruff + * Paul Walmsley + * Tero Kristo + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include +#include +#include +#include +#include +#include + +#include "clock.h" + +/* + * MAX_MODULE_ENABLE_WAIT: maximum of number of microseconds to wait + * for a module to indicate that it is no longer in idle + */ +#define MAX_MODULE_ENABLE_WAIT 100000 + +/* + * CM module register offsets, used for calculating the companion + * register addresses. + */ +#define CM_FCLKEN 0x0000 +#define CM_ICLKEN 0x0010 + +/** + * _wait_idlest_generic - wait for a module to leave the idle state + * @clk: module clock to wait for (needed for register offsets) + * @reg: virtual address of module IDLEST register + * @mask: value to mask against to determine if the module is active + * @idlest: idle state indicator (0 or 1) for the clock + * @name: name of the clock (for printk) + * + * Wait for a module to leave idle, where its idle-status register is + * not inside the CM module. Returns 1 if the module left idle + * promptly, or 0 if the module did not leave idle before the timeout + * elapsed. XXX Deprecated - should be moved into drivers for the + * individual IP block that the IDLEST register exists in. + */ +static int _wait_idlest_generic(struct clk_hw_omap *clk, void __iomem *reg, + u32 mask, u8 idlest, const char *name) +{ + int i = 0, ena = 0; + + ena = (idlest) ? 0 : mask; + + /* Wait until module enters enabled state */ + for (i = 0; i < MAX_MODULE_ENABLE_WAIT; i++) { + if ((ti_clk_ll_ops->clk_readl(reg) & mask) == ena) + break; + udelay(1); + } + + if (i < MAX_MODULE_ENABLE_WAIT) + pr_debug("omap clock: module associated with clock %s ready after %d loops\n", + name, i); + else + pr_err("omap clock: module associated with clock %s didn't enable in %d tries\n", + name, MAX_MODULE_ENABLE_WAIT); + + return (i < MAX_MODULE_ENABLE_WAIT) ? 1 : 0; +} + +/** + * _omap2_module_wait_ready - wait for an OMAP module to leave IDLE + * @clk: struct clk * belonging to the module + * + * If the necessary clocks for the OMAP hardware IP block that + * corresponds to clock @clk are enabled, then wait for the module to + * indicate readiness (i.e., to leave IDLE). This code does not + * belong in the clock code and will be moved in the medium term to + * module-dependent code. No return value. + */ +static void _omap2_module_wait_ready(struct clk_hw_omap *clk) +{ + void __iomem *companion_reg, *idlest_reg; + u8 other_bit, idlest_bit, idlest_val, idlest_reg_id; + s16 prcm_mod; + int r; + + /* Not all modules have multiple clocks that their IDLEST depends on */ + if (clk->ops->find_companion) { + clk->ops->find_companion(clk, &companion_reg, &other_bit); + if (!(ti_clk_ll_ops->clk_readl(companion_reg) & + (1 << other_bit))) + return; + } + + clk->ops->find_idlest(clk, &idlest_reg, &idlest_bit, &idlest_val); + r = ti_clk_ll_ops->cm_split_idlest_reg(idlest_reg, &prcm_mod, + &idlest_reg_id); + if (r) { + /* IDLEST register not in the CM module */ + _wait_idlest_generic(clk, idlest_reg, (1 << idlest_bit), + idlest_val, __clk_get_name(clk->hw.clk)); + } else { + ti_clk_ll_ops->cm_wait_module_ready(0, prcm_mod, idlest_reg_id, + idlest_bit); + } +} + +/** + * omap2_clk_dflt_find_companion - find companion clock to @clk + * @clk: struct clk * to find the companion clock of + * @other_reg: void __iomem ** to return the companion clock CM_*CLKEN va in + * @other_bit: u8 ** to return the companion clock bit shift in + * + * Note: We don't need special code here for INVERT_ENABLE for the + * time being since INVERT_ENABLE only applies to clocks enabled by + * CM_CLKEN_PLL + * + * Convert CM_ICLKEN* <-> CM_FCLKEN*. This conversion assumes it's + * just a matter of XORing the bits. + * + * Some clocks don't have companion clocks. For example, modules with + * only an interface clock (such as MAILBOXES) don't have a companion + * clock. Right now, this code relies on the hardware exporting a bit + * in the correct companion register that indicates that the + * nonexistent 'companion clock' is active. Future patches will + * associate this type of code with per-module data structures to + * avoid this issue, and remove the casts. No return value. + */ +void omap2_clk_dflt_find_companion(struct clk_hw_omap *clk, + void __iomem **other_reg, u8 *other_bit) +{ + u32 r; + + /* + * Convert CM_ICLKEN* <-> CM_FCLKEN*. This conversion assumes + * it's just a matter of XORing the bits. + */ + r = ((__force u32)clk->enable_reg ^ (CM_FCLKEN ^ CM_ICLKEN)); + + *other_reg = (__force void __iomem *)r; + *other_bit = clk->enable_bit; +} + +/** + * omap2_clk_dflt_find_idlest - find CM_IDLEST reg va, bit shift for @clk + * @clk: struct clk * to find IDLEST info for + * @idlest_reg: void __iomem ** to return the CM_IDLEST va in + * @idlest_bit: u8 * to return the CM_IDLEST bit shift in + * @idlest_val: u8 * to return the idle status indicator + * + * Return the CM_IDLEST register address and bit shift corresponding + * to the module that "owns" this clock. This default code assumes + * that the CM_IDLEST bit shift is the CM_*CLKEN bit shift, and that + * the IDLEST register address ID corresponds to the CM_*CLKEN + * register address ID (e.g., that CM_FCLKEN2 corresponds to + * CM_IDLEST2). This is not true for all modules. No return value. + */ +void omap2_clk_dflt_find_idlest(struct clk_hw_omap *clk, + void __iomem **idlest_reg, u8 *idlest_bit, + u8 *idlest_val) +{ + u32 r; + + r = (((__force u32)clk->enable_reg & ~0xf0) | 0x20); + *idlest_reg = (__force void __iomem *)r; + *idlest_bit = clk->enable_bit; + + /* + * 24xx uses 0 to indicate not ready, and 1 to indicate ready. + * 34xx reverses this, just to keep us on our toes + * AM35xx uses both, depending on the module. + */ + *idlest_val = ti_clk_get_features()->cm_idlest_val; +} + +/** + * omap2_dflt_clk_enable - enable a clock in the hardware + * @hw: struct clk_hw * of the clock to enable + * + * Enable the clock @hw in the hardware. We first call into the OMAP + * clockdomain code to "enable" the corresponding clockdomain if this + * is the first enabled user of the clockdomain. Then program the + * hardware to enable the clock. Then wait for the IP block that uses + * this clock to leave idle (if applicable). Returns the error value + * from clkdm_clk_enable() if it terminated with an error, or -EINVAL + * if @hw has a null clock enable_reg, or zero upon success. + */ +int omap2_dflt_clk_enable(struct clk_hw *hw) +{ + struct clk_hw_omap *clk; + u32 v; + int ret = 0; + bool clkdm_control; + + if (ti_clk_get_features()->flags & TI_CLK_DISABLE_CLKDM_CONTROL) + clkdm_control = false; + else + clkdm_control = true; + + clk = to_clk_hw_omap(hw); + + if (clkdm_control && clk->clkdm) { + ret = ti_clk_ll_ops->clkdm_clk_enable(clk->clkdm, hw->clk); + if (ret) { + WARN(1, + "%s: could not enable %s's clockdomain %s: %d\n", + __func__, __clk_get_name(hw->clk), + clk->clkdm_name, ret); + return ret; + } + } + + if (unlikely(!clk->enable_reg)) { + pr_err("%s: %s missing enable_reg\n", __func__, + __clk_get_name(hw->clk)); + ret = -EINVAL; + goto err; + } + + /* FIXME should not have INVERT_ENABLE bit here */ + v = ti_clk_ll_ops->clk_readl(clk->enable_reg); + if (clk->flags & INVERT_ENABLE) + v &= ~(1 << clk->enable_bit); + else + v |= (1 << clk->enable_bit); + ti_clk_ll_ops->clk_writel(v, clk->enable_reg); + v = ti_clk_ll_ops->clk_readl(clk->enable_reg); /* OCP barrier */ + + if (clk->ops && clk->ops->find_idlest) + _omap2_module_wait_ready(clk); + + return 0; + +err: + if (clkdm_control && clk->clkdm) + ti_clk_ll_ops->clkdm_clk_disable(clk->clkdm, hw->clk); + return ret; +} + +/** + * omap2_dflt_clk_disable - disable a clock in the hardware + * @hw: struct clk_hw * of the clock to disable + * + * Disable the clock @hw in the hardware, and call into the OMAP + * clockdomain code to "disable" the corresponding clockdomain if all + * clocks/hwmods in that clockdomain are now disabled. No return + * value. + */ +void omap2_dflt_clk_disable(struct clk_hw *hw) +{ + struct clk_hw_omap *clk; + u32 v; + + clk = to_clk_hw_omap(hw); + if (!clk->enable_reg) { + /* + * 'independent' here refers to a clock which is not + * controlled by its parent. + */ + pr_err("%s: independent clock %s has no enable_reg\n", + __func__, __clk_get_name(hw->clk)); + return; + } + + v = ti_clk_ll_ops->clk_readl(clk->enable_reg); + if (clk->flags & INVERT_ENABLE) + v |= (1 << clk->enable_bit); + else + v &= ~(1 << clk->enable_bit); + ti_clk_ll_ops->clk_writel(v, clk->enable_reg); + /* No OCP barrier needed here since it is a disable operation */ + + if (!(ti_clk_get_features()->flags & TI_CLK_DISABLE_CLKDM_CONTROL) && + clk->clkdm) + ti_clk_ll_ops->clkdm_clk_disable(clk->clkdm, hw->clk); +} + +/** + * omap2_dflt_clk_is_enabled - is clock enabled in the hardware? + * @hw: struct clk_hw * to check + * + * Return 1 if the clock represented by @hw is enabled in the + * hardware, or 0 otherwise. Intended for use in the struct + * clk_ops.is_enabled function pointer. + */ +int omap2_dflt_clk_is_enabled(struct clk_hw *hw) +{ + struct clk_hw_omap *clk = to_clk_hw_omap(hw); + u32 v; + + v = ti_clk_ll_ops->clk_readl(clk->enable_reg); + + if (clk->flags & INVERT_ENABLE) + v ^= BIT(clk->enable_bit); + + v &= BIT(clk->enable_bit); + + return v ? 1 : 0; +} + +const struct clk_hw_omap_ops clkhwops_wait = { + .find_idlest = omap2_clk_dflt_find_idlest, + .find_companion = omap2_clk_dflt_find_companion, +}; diff --git a/drivers/clk/ti/clock.h b/drivers/clk/ti/clock.h index 688d9e4..f215383 100644 --- a/drivers/clk/ti/clock.h +++ b/drivers/clk/ti/clock.h @@ -175,9 +175,14 @@ void omap2_clk_enable_init_clocks(const char **clk_names, u8 num_clocks); extern const struct clk_hw_omap_ops clkhwops_omap3_dpll; extern const struct clk_hw_omap_ops clkhwops_omap4_dpllmx; +extern const struct clk_hw_omap_ops clkhwops_wait; extern const struct clk_hw_omap_ops clkhwops_iclk; extern const struct clk_hw_omap_ops clkhwops_iclk_wait; +int omap2_dflt_clk_enable(struct clk_hw *hw); +void omap2_dflt_clk_disable(struct clk_hw *hw); +int omap2_dflt_clk_is_enabled(struct clk_hw *hw); + u8 omap2_init_dpll_parent(struct clk_hw *hw); int omap3_noncore_dpll_enable(struct clk_hw *hw); void omap3_noncore_dpll_disable(struct clk_hw *hw); diff --git a/include/linux/clk/ti.h b/include/linux/clk/ti.h index fbb65e4..81a913e 100644 --- a/include/linux/clk/ti.h +++ b/include/linux/clk/ti.h @@ -278,9 +278,6 @@ int omap2_clk_disable_autoidle_all(void); int omap2_clk_enable_autoidle_all(void); int omap2_clk_allow_idle(struct clk *clk); int omap2_clk_deny_idle(struct clk *clk); -int omap2_dflt_clk_enable(struct clk_hw *hw); -void omap2_dflt_clk_disable(struct clk_hw *hw); -int omap2_dflt_clk_is_enabled(struct clk_hw *hw); void omap2_clkt_iclk_allow_idle(struct clk_hw_omap *clk); void omap2_clkt_iclk_deny_idle(struct clk_hw_omap *clk); void omap2_clk_dflt_find_companion(struct clk_hw_omap *clk, @@ -337,7 +334,6 @@ const struct ti_clk_features *ti_clk_get_features(void); extern const struct clk_hw_omap_ops clkhwops_omap2xxx_dpll; extern const struct clk_hw_omap_ops clkhwops_omap2430_i2chs_wait; -extern const struct clk_hw_omap_ops clkhwops_wait; extern const struct clk_hw_omap_ops clkhwops_omap3430es2_dss_usbhost_wait; extern const struct clk_hw_omap_ops clkhwops_am35xx_ipss_module_wait; extern const struct clk_hw_omap_ops clkhwops_am35xx_ipss_wait; -- cgit v0.10.2