From 0a2d4048a22079d7e79d6654bbacbef57bd5728a Mon Sep 17 00:00:00 2001 From: Russell King - ARM Linux Date: Mon, 20 Jun 2011 20:10:08 +0100 Subject: mmc: block: allow get_card_status() to return error status If the MMC_SEND_STATUS command is not successful, we should not return a zero status word, but instead allow the caller to know positively that an error occurred. Convert the open-coded get_card_status() to use the helper function, and provide definitions for the card state field. Signed-off-by: Russell King Acked-by: Linus Walleij Tested-by: Pawel Moll Signed-off-by: Chris Ball diff --git a/drivers/mmc/card/block.c b/drivers/mmc/card/block.c index f85e422..3200e2c 100644 --- a/drivers/mmc/card/block.c +++ b/drivers/mmc/card/block.c @@ -525,7 +525,7 @@ static u32 mmc_sd_num_wr_blocks(struct mmc_card *card) return result; } -static u32 get_card_status(struct mmc_card *card, struct request *req) +static int get_card_status(struct mmc_card *card, u32 *status, int retries) { struct mmc_command cmd = {0}; int err; @@ -534,11 +534,10 @@ static u32 get_card_status(struct mmc_card *card, struct request *req) if (!mmc_host_is_spi(card->host)) cmd.arg = card->rca << 16; cmd.flags = MMC_RSP_SPI_R2 | MMC_RSP_R1 | MMC_CMD_AC; - err = mmc_wait_for_cmd(card->host, &cmd, 0); - if (err) - printk(KERN_ERR "%s: error %d sending status command", - req->rq_disk->disk_name, err); - return cmd.resp[0]; + err = mmc_wait_for_cmd(card->host, &cmd, retries); + if (err == 0) + *status = cmd.resp[0]; + return err; } static int mmc_blk_issue_discard_rq(struct mmc_queue *mq, struct request *req) @@ -686,7 +685,6 @@ static int mmc_blk_issue_rw_rq(struct mmc_queue *mq, struct request *req) (md->flags & MMC_BLK_REL_WR); do { - struct mmc_command cmd = {0}; u32 readcmd, writecmd, status = 0; memset(&brq, 0, sizeof(struct mmc_blk_request)); @@ -817,7 +815,7 @@ static int mmc_blk_issue_rw_rq(struct mmc_queue *mq, struct request *req) disable_multi = 1; continue; } - status = get_card_status(card, req); + get_card_status(card, &status, 0); } if (brq.sbc.error) { @@ -854,12 +852,7 @@ static int mmc_blk_issue_rw_rq(struct mmc_queue *mq, struct request *req) if (!mmc_host_is_spi(card->host) && rq_data_dir(req) != READ) { do { - int err; - - cmd.opcode = MMC_SEND_STATUS; - cmd.arg = card->rca << 16; - cmd.flags = MMC_RSP_R1 | MMC_CMD_AC; - err = mmc_wait_for_cmd(card->host, &cmd, 5); + int err = get_card_status(card, &status, 5); if (err) { printk(KERN_ERR "%s: error %d requesting status\n", req->rq_disk->disk_name, err); @@ -870,16 +863,8 @@ static int mmc_blk_issue_rw_rq(struct mmc_queue *mq, struct request *req) * so make sure to check both the busy * indication and the card state. */ - } while (!(cmd.resp[0] & R1_READY_FOR_DATA) || - (R1_CURRENT_STATE(cmd.resp[0]) == 7)); - -#if 0 - if (cmd.resp[0] & ~0x00000900) - printk(KERN_ERR "%s: status = %08x\n", - req->rq_disk->disk_name, cmd.resp[0]); - if (mmc_decode_status(cmd.resp)) - goto cmd_err; -#endif + } while (!(status & R1_READY_FOR_DATA) || + (R1_CURRENT_STATE(status) == R1_STATE_PRG)); } if (brq.cmd.error || brq.stop.error || brq.data.error) { diff --git a/include/linux/mmc/mmc.h b/include/linux/mmc/mmc.h index 5bade06..5a794cb 100644 --- a/include/linux/mmc/mmc.h +++ b/include/linux/mmc/mmc.h @@ -140,6 +140,16 @@ static inline bool mmc_op_multi(u32 opcode) #define R1_SWITCH_ERROR (1 << 7) /* sx, c */ #define R1_APP_CMD (1 << 5) /* sr, c */ +#define R1_STATE_IDLE 0 +#define R1_STATE_READY 1 +#define R1_STATE_IDENT 2 +#define R1_STATE_STBY 3 +#define R1_STATE_TRAN 4 +#define R1_STATE_DATA 5 +#define R1_STATE_RCV 6 +#define R1_STATE_PRG 7 +#define R1_STATE_DIS 8 + /* * MMC/SD in SPI mode reports R1 status always, and R2 for SEND_STATUS * R1 is the low order byte; R2 is the next highest byte, when present. -- cgit v0.10.2