From 436d42c61c3eef1d02256174c8615046c61a28ad Mon Sep 17 00:00:00 2001
From: Arnd Bergmann <arnd@arndb.de>
Date: Fri, 24 Aug 2012 15:22:12 +0200
Subject: ARM: samsung: move platform_data definitions

Platform data for device drivers should be defined in
include/linux/platform_data/*.h, not in the architecture
and platform specific directories.

This moves such data out of the samsung include directories

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Nicolas Pitre <nico@linaro.org>
Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Cc: Kukjin Kim <kgene.kim@samsung.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Ben Dooks <ben-linux@fluff.org>
Cc: Jeff Garzik <jgarzik@pobox.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: "Wolfram Sang (embedded platforms)" <w.sang@pengutronix.de>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Bryan Wu <bryan.wu@canonical.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Cc: Sylwester Nawrocki <s.nawrocki@samsung.com>
Cc: Chris Ball <cjb@laptop.org>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: Felipe Balbi <balbi@ti.com>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Sangbeom Kim <sbkim73@samsung.com>
Cc: Liam Girdwood <lrg@ti.com>
Cc: linux-samsung-soc@vger.kernel.org

diff --git a/arch/arm/mach-exynos/dev-audio.c b/arch/arm/mach-exynos/dev-audio.c
index b33a5b6..ae321c7 100644
--- a/arch/arm/mach-exynos/dev-audio.c
+++ b/arch/arm/mach-exynos/dev-audio.c
@@ -16,7 +16,7 @@
 #include <linux/gpio.h>
 
 #include <plat/gpio-cfg.h>
-#include <plat/audio.h>
+#include <linux/platform_data/asoc-s3c.h>
 
 #include <mach/map.h>
 #include <mach/dma.h>
diff --git a/arch/arm/mach-exynos/dev-ohci.c b/arch/arm/mach-exynos/dev-ohci.c
index b8e7530..14ed795 100644
--- a/arch/arm/mach-exynos/dev-ohci.c
+++ b/arch/arm/mach-exynos/dev-ohci.c
@@ -15,7 +15,7 @@
 
 #include <mach/irqs.h>
 #include <mach/map.h>
-#include <mach/ohci.h>
+#include <linux/platform_data/usb-exynos.h>
 
 #include <plat/devs.h>
 #include <plat/usb-phy.h>
diff --git a/arch/arm/mach-exynos/include/mach/ohci.h b/arch/arm/mach-exynos/include/mach/ohci.h
deleted file mode 100644
index c256c59..0000000
--- a/arch/arm/mach-exynos/include/mach/ohci.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/*
- * Copyright (C) 2011 Samsung Electronics Co.Ltd
- *		http://www.samsung.com/
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-#ifndef __MACH_EXYNOS_OHCI_H
-#define __MACH_EXYNOS_OHCI_H
-
-struct exynos4_ohci_platdata {
-	int (*phy_init)(struct platform_device *pdev, int type);
-	int (*phy_exit)(struct platform_device *pdev, int type);
-};
-
-extern void exynos4_ohci_set_platdata(struct exynos4_ohci_platdata *pd);
-
-#endif /* __MACH_EXYNOS_OHCI_H */
diff --git a/arch/arm/mach-exynos/mach-nuri.c b/arch/arm/mach-exynos/mach-nuri.c
index ea785fc..393d2ce 100644
--- a/arch/arm/mach-exynos/mach-nuri.c
+++ b/arch/arm/mach-exynos/mach-nuri.c
@@ -45,14 +45,14 @@
 #include <plat/devs.h>
 #include <plat/fb.h>
 #include <plat/sdhci.h>
-#include <plat/ehci.h>
+#include <linux/platform_data/usb-ehci-s5p.h>
 #include <plat/clock.h>
 #include <plat/gpio-cfg.h>
-#include <plat/iic.h>
+#include <linux/platform_data/i2c-s3c2410.h>
 #include <plat/mfc.h>
 #include <plat/fimc-core.h>
 #include <plat/camport.h>
-#include <plat/mipi_csis.h>
+#include <linux/platform_data/mipi-csis.h>
 
 #include <mach/map.h>
 
diff --git a/arch/arm/mach-exynos/mach-origen.c b/arch/arm/mach-exynos/mach-origen.c
index 5ca8030..4a531dc 100644
--- a/arch/arm/mach-exynos/mach-origen.c
+++ b/arch/arm/mach-exynos/mach-origen.c
@@ -35,15 +35,15 @@
 #include <plat/cpu.h>
 #include <plat/devs.h>
 #include <plat/sdhci.h>
-#include <plat/iic.h>
-#include <plat/ehci.h>
+#include <linux/platform_data/i2c-s3c2410.h>
+#include <linux/platform_data/usb-ehci-s5p.h>
 #include <plat/clock.h>
 #include <plat/gpio-cfg.h>
 #include <plat/backlight.h>
 #include <plat/fb.h>
 #include <plat/mfc.h>
 
-#include <mach/ohci.h>
+#include <linux/platform_data/usb-exynos.h>
 #include <mach/map.h>
 
 #include <drm/exynos_drm.h>
diff --git a/arch/arm/mach-exynos/mach-smdk4x12.c b/arch/arm/mach-exynos/mach-smdk4x12.c
index b26beb1..6a791fd 100644
--- a/arch/arm/mach-exynos/mach-smdk4x12.c
+++ b/arch/arm/mach-exynos/mach-smdk4x12.c
@@ -32,7 +32,7 @@
 #include <plat/devs.h>
 #include <plat/fb.h>
 #include <plat/gpio-cfg.h>
-#include <plat/iic.h>
+#include <linux/platform_data/i2c-s3c2410.h>
 #include <plat/keypad.h>
 #include <plat/mfc.h>
 #include <plat/regs-fb.h>
diff --git a/arch/arm/mach-exynos/mach-smdkv310.c b/arch/arm/mach-exynos/mach-smdkv310.c
index 3cfa688..fa2ada6 100644
--- a/arch/arm/mach-exynos/mach-smdkv310.c
+++ b/arch/arm/mach-exynos/mach-smdkv310.c
@@ -34,15 +34,15 @@
 #include <plat/fb.h>
 #include <plat/keypad.h>
 #include <plat/sdhci.h>
-#include <plat/iic.h>
+#include <linux/platform_data/i2c-s3c2410.h>
 #include <plat/gpio-cfg.h>
 #include <plat/backlight.h>
 #include <plat/mfc.h>
-#include <plat/ehci.h>
+#include <linux/platform_data/usb-ehci-s5p.h>
 #include <plat/clock.h>
 
 #include <mach/map.h>
-#include <mach/ohci.h>
+#include <linux/platform_data/usb-exynos.h>
 
 #include <drm/exynos_drm.h>
 #include "common.h"
diff --git a/arch/arm/mach-exynos/mach-universal_c210.c b/arch/arm/mach-exynos/mach-universal_c210.c
index 4d1f40d..bc49e5a 100644
--- a/arch/arm/mach-exynos/mach-universal_c210.c
+++ b/arch/arm/mach-exynos/mach-universal_c210.c
@@ -34,7 +34,7 @@
 #include <plat/clock.h>
 #include <plat/cpu.h>
 #include <plat/devs.h>
-#include <plat/iic.h>
+#include <linux/platform_data/i2c-s3c2410.h>
 #include <plat/gpio-cfg.h>
 #include <plat/fb.h>
 #include <plat/mfc.h>
@@ -43,7 +43,7 @@
 #include <plat/fimc-core.h>
 #include <plat/s5p-time.h>
 #include <plat/camport.h>
-#include <plat/mipi_csis.h>
+#include <linux/platform_data/mipi-csis.h>
 
 #include <mach/map.h>
 
diff --git a/arch/arm/mach-exynos/setup-i2c0.c b/arch/arm/mach-exynos/setup-i2c0.c
index b90d94c..5700f23 100644
--- a/arch/arm/mach-exynos/setup-i2c0.c
+++ b/arch/arm/mach-exynos/setup-i2c0.c
@@ -14,7 +14,7 @@
 struct platform_device; /* don't need the contents */
 
 #include <linux/gpio.h>
-#include <plat/iic.h>
+#include <linux/platform_data/i2c-s3c2410.h>
 #include <plat/gpio-cfg.h>
 #include <plat/cpu.h>
 
diff --git a/arch/arm/mach-exynos/setup-i2c1.c b/arch/arm/mach-exynos/setup-i2c1.c
index fd7235a..8d2279cc 100644
--- a/arch/arm/mach-exynos/setup-i2c1.c
+++ b/arch/arm/mach-exynos/setup-i2c1.c
@@ -13,7 +13,7 @@
 struct platform_device; /* don't need the contents */
 
 #include <linux/gpio.h>
-#include <plat/iic.h>
+#include <linux/platform_data/i2c-s3c2410.h>
 #include <plat/gpio-cfg.h>
 
 void s3c_i2c1_cfg_gpio(struct platform_device *dev)
diff --git a/arch/arm/mach-exynos/setup-i2c2.c b/arch/arm/mach-exynos/setup-i2c2.c
index 2694b19..0ed62fc 100644
--- a/arch/arm/mach-exynos/setup-i2c2.c
+++ b/arch/arm/mach-exynos/setup-i2c2.c
@@ -13,7 +13,7 @@
 struct platform_device; /* don't need the contents */
 
 #include <linux/gpio.h>
-#include <plat/iic.h>
+#include <linux/platform_data/i2c-s3c2410.h>
 #include <plat/gpio-cfg.h>
 
 void s3c_i2c2_cfg_gpio(struct platform_device *dev)
diff --git a/arch/arm/mach-exynos/setup-i2c3.c b/arch/arm/mach-exynos/setup-i2c3.c
index 379bd30..7787fd2 100644
--- a/arch/arm/mach-exynos/setup-i2c3.c
+++ b/arch/arm/mach-exynos/setup-i2c3.c
@@ -13,7 +13,7 @@
 struct platform_device; /* don't need the contents */
 
 #include <linux/gpio.h>
-#include <plat/iic.h>
+#include <linux/platform_data/i2c-s3c2410.h>
 #include <plat/gpio-cfg.h>
 
 void s3c_i2c3_cfg_gpio(struct platform_device *dev)
diff --git a/arch/arm/mach-exynos/setup-i2c4.c b/arch/arm/mach-exynos/setup-i2c4.c
index 9f3c048..edc847f 100644
--- a/arch/arm/mach-exynos/setup-i2c4.c
+++ b/arch/arm/mach-exynos/setup-i2c4.c
@@ -13,7 +13,7 @@
 struct platform_device; /* don't need the contents */
 
 #include <linux/gpio.h>
-#include <plat/iic.h>
+#include <linux/platform_data/i2c-s3c2410.h>
 #include <plat/gpio-cfg.h>
 
 void s3c_i2c4_cfg_gpio(struct platform_device *dev)
diff --git a/arch/arm/mach-exynos/setup-i2c5.c b/arch/arm/mach-exynos/setup-i2c5.c
index 77e1a1e..d88af7f 100644
--- a/arch/arm/mach-exynos/setup-i2c5.c
+++ b/arch/arm/mach-exynos/setup-i2c5.c
@@ -13,7 +13,7 @@
 struct platform_device; /* don't need the contents */
 
 #include <linux/gpio.h>
-#include <plat/iic.h>
+#include <linux/platform_data/i2c-s3c2410.h>
 #include <plat/gpio-cfg.h>
 
 void s3c_i2c5_cfg_gpio(struct platform_device *dev)
diff --git a/arch/arm/mach-exynos/setup-i2c6.c b/arch/arm/mach-exynos/setup-i2c6.c
index 284d12b..c590286 100644
--- a/arch/arm/mach-exynos/setup-i2c6.c
+++ b/arch/arm/mach-exynos/setup-i2c6.c
@@ -13,7 +13,7 @@
 struct platform_device; /* don't need the contents */
 
 #include <linux/gpio.h>
-#include <plat/iic.h>
+#include <linux/platform_data/i2c-s3c2410.h>
 #include <plat/gpio-cfg.h>
 
 void s3c_i2c6_cfg_gpio(struct platform_device *dev)
diff --git a/arch/arm/mach-exynos/setup-i2c7.c b/arch/arm/mach-exynos/setup-i2c7.c
index b7611ee..1bba755 100644
--- a/arch/arm/mach-exynos/setup-i2c7.c
+++ b/arch/arm/mach-exynos/setup-i2c7.c
@@ -13,7 +13,7 @@
 struct platform_device; /* don't need the contents */
 
 #include <linux/gpio.h>
-#include <plat/iic.h>
+#include <linux/platform_data/i2c-s3c2410.h>
 #include <plat/gpio-cfg.h>
 
 void s3c_i2c7_cfg_gpio(struct platform_device *dev)
diff --git a/arch/arm/mach-s3c24xx/common-smdk.c b/arch/arm/mach-s3c24xx/common-smdk.c
index 87e75a2..3b2cf6d 100644
--- a/arch/arm/mach-s3c24xx/common-smdk.c
+++ b/arch/arm/mach-s3c24xx/common-smdk.c
@@ -37,9 +37,9 @@
 #include <asm/irq.h>
 
 #include <mach/regs-gpio.h>
-#include <mach/leds-gpio.h>
+#include <linux/platform_data/leds-s3c24xx.h>
 
-#include <plat/nand.h>
+#include <linux/platform_data/mtd-nand-s3c2410.h>
 
 #include <plat/common-smdk.h>
 #include <plat/gpio-cfg.h>
diff --git a/arch/arm/mach-s3c24xx/include/mach/leds-gpio.h b/arch/arm/mach-s3c24xx/include/mach/leds-gpio.h
deleted file mode 100644
index d8a7672..0000000
--- a/arch/arm/mach-s3c24xx/include/mach/leds-gpio.h
+++ /dev/null
@@ -1,28 +0,0 @@
-/* arch/arm/mach-s3c2410/include/mach/leds-gpio.h
- *
- * Copyright (c) 2006 Simtec Electronics
- *	http://armlinux.simtec.co.uk/
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C24XX - LEDs GPIO connector
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_LEDSGPIO_H
-#define __ASM_ARCH_LEDSGPIO_H "leds-gpio.h"
-
-#define S3C24XX_LEDF_ACTLOW	(1<<0)		/* LED is on when GPIO low */
-#define S3C24XX_LEDF_TRISTATE	(1<<1)		/* tristate to turn off */
-
-struct s3c24xx_led_platdata {
-	unsigned int		 gpio;
-	unsigned int		 flags;
-
-	char			*name;
-	char			*def_trigger;
-};
-
-#endif /* __ASM_ARCH_LEDSGPIO_H */
diff --git a/arch/arm/mach-s3c24xx/mach-amlm5900.c b/arch/arm/mach-s3c24xx/mach-amlm5900.c
index ea2c4b0..f4ad99c 100644
--- a/arch/arm/mach-s3c24xx/mach-amlm5900.c
+++ b/arch/arm/mach-s3c24xx/mach-amlm5900.c
@@ -53,7 +53,7 @@
 #include <mach/regs-lcd.h>
 #include <mach/regs-gpio.h>
 
-#include <plat/iic.h>
+#include <linux/platform_data/i2c-s3c2410.h>
 #include <plat/devs.h>
 #include <plat/cpu.h>
 #include <plat/gpio-cfg.h>
diff --git a/arch/arm/mach-s3c24xx/mach-anubis.c b/arch/arm/mach-s3c24xx/mach-anubis.c
index 5a7d0c0..df890fb 100644
--- a/arch/arm/mach-s3c24xx/mach-anubis.c
+++ b/arch/arm/mach-s3c24xx/mach-anubis.c
@@ -40,8 +40,8 @@
 #include <mach/regs-gpio.h>
 #include <mach/regs-mem.h>
 #include <mach/regs-lcd.h>
-#include <plat/nand.h>
-#include <plat/iic.h>
+#include <linux/platform_data/mtd-nand-s3c2410.h>
+#include <linux/platform_data/i2c-s3c2410.h>
 
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/nand.h>
@@ -53,7 +53,7 @@
 #include <plat/clock.h>
 #include <plat/devs.h>
 #include <plat/cpu.h>
-#include <plat/audio-simtec.h>
+#include <linux/platform_data/asoc-s3c24xx_simtec.h>
 
 #include "simtec.h"
 #include "common.h"
diff --git a/arch/arm/mach-s3c24xx/mach-at2440evb.c b/arch/arm/mach-s3c24xx/mach-at2440evb.c
index 7a05abf..00381fe 100644
--- a/arch/arm/mach-s3c24xx/mach-at2440evb.c
+++ b/arch/arm/mach-s3c24xx/mach-at2440evb.c
@@ -36,8 +36,8 @@
 #include <mach/regs-gpio.h>
 #include <mach/regs-mem.h>
 #include <mach/regs-lcd.h>
-#include <plat/nand.h>
-#include <plat/iic.h>
+#include <linux/platform_data/mtd-nand-s3c2410.h>
+#include <linux/platform_data/i2c-s3c2410.h>
 
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/nand.h>
@@ -47,7 +47,7 @@
 #include <plat/clock.h>
 #include <plat/devs.h>
 #include <plat/cpu.h>
-#include <plat/mci.h>
+#include <linux/platform_data/mmc-s3cmci.h>
 
 #include "common.h"
 
diff --git a/arch/arm/mach-s3c24xx/mach-bast.c b/arch/arm/mach-s3c24xx/mach-bast.c
index 1cf1720..6a30ce7 100644
--- a/arch/arm/mach-s3c24xx/mach-bast.c
+++ b/arch/arm/mach-s3c24xx/mach-bast.c
@@ -45,9 +45,9 @@
 #include <mach/regs-mem.h>
 #include <mach/regs-lcd.h>
 
-#include <plat/hwmon.h>
-#include <plat/nand.h>
-#include <plat/iic.h>
+#include <linux/platform_data/hwmon-s3c.h>
+#include <linux/platform_data/mtd-nand-s3c2410.h>
+#include <linux/platform_data/i2c-s3c2410.h>
 #include <mach/fb.h>
 
 #include <linux/mtd/mtd.h>
@@ -62,7 +62,7 @@
 #include <plat/cpu.h>
 #include <plat/cpu-freq.h>
 #include <plat/gpio-cfg.h>
-#include <plat/audio-simtec.h>
+#include <linux/platform_data/asoc-s3c24xx_simtec.h>
 
 #include "simtec.h"
 #include "common.h"
diff --git a/arch/arm/mach-s3c24xx/mach-gta02.c b/arch/arm/mach-s3c24xx/mach-gta02.c
index 92e1f93..4a96346 100644
--- a/arch/arm/mach-s3c24xx/mach-gta02.c
+++ b/arch/arm/mach-s3c24xx/mach-gta02.c
@@ -73,21 +73,21 @@
 #include <mach/regs-gpio.h>
 #include <mach/fb.h>
 
-#include <plat/usb-control.h>
+#include <linux/platform_data/usb-ohci-s3c2410.h>
 #include <mach/regs-mem.h>
 #include <mach/hardware.h>
 
 #include <mach/gta02.h>
 
 #include <plat/regs-serial.h>
-#include <plat/nand.h>
+#include <linux/platform_data/mtd-nand-s3c2410.h>
 #include <plat/devs.h>
 #include <plat/cpu.h>
 #include <plat/pm.h>
-#include <plat/udc.h>
+#include <linux/platform_data/usb-s3c2410_udc.h>
 #include <plat/gpio-cfg.h>
-#include <plat/iic.h>
-#include <plat/ts.h>
+#include <linux/platform_data/i2c-s3c2410.h>
+#include <linux/platform_data/touchscreen-s3c2410.h>
 
 #include "common.h"
 
diff --git a/arch/arm/mach-s3c24xx/mach-h1940.c b/arch/arm/mach-s3c24xx/mach-h1940.c
index bb8d008..9638b33 100644
--- a/arch/arm/mach-s3c24xx/mach-h1940.c
+++ b/arch/arm/mach-s3c24xx/mach-h1940.c
@@ -56,8 +56,8 @@
 #include <mach/h1940.h>
 #include <mach/h1940-latch.h>
 #include <mach/fb.h>
-#include <plat/udc.h>
-#include <plat/iic.h>
+#include <linux/platform_data/usb-s3c2410_udc.h>
+#include <linux/platform_data/i2c-s3c2410.h>
 
 #include <plat/gpio-cfg.h>
 #include <plat/clock.h>
@@ -65,8 +65,8 @@
 #include <plat/cpu.h>
 #include <plat/pll.h>
 #include <plat/pm.h>
-#include <plat/mci.h>
-#include <plat/ts.h>
+#include <linux/platform_data/mmc-s3cmci.h>
+#include <linux/platform_data/touchscreen-s3c2410.h>
 
 #include <sound/uda1380.h>
 
diff --git a/arch/arm/mach-s3c24xx/mach-jive.c b/arch/arm/mach-s3c24xx/mach-jive.c
index ae73ba3..28ad25b 100644
--- a/arch/arm/mach-s3c24xx/mach-jive.c
+++ b/arch/arm/mach-s3c24xx/mach-jive.c
@@ -32,8 +32,8 @@
 #include <asm/mach/irq.h>
 
 #include <plat/regs-serial.h>
-#include <plat/nand.h>
-#include <plat/iic.h>
+#include <linux/platform_data/mtd-nand-s3c2410.h>
+#include <linux/platform_data/i2c-s3c2410.h>
 
 #include <mach/regs-power.h>
 #include <mach/regs-gpio.h>
@@ -54,7 +54,7 @@
 #include <plat/devs.h>
 #include <plat/cpu.h>
 #include <plat/pm.h>
-#include <plat/udc.h>
+#include <linux/platform_data/usb-s3c2410_udc.h>
 
 static struct map_desc jive_iodesc[] __initdata = {
 };
diff --git a/arch/arm/mach-s3c24xx/mach-mini2440.c b/arch/arm/mach-s3c24xx/mach-mini2440.c
index bd6d252..c676b8e 100644
--- a/arch/arm/mach-s3c24xx/mach-mini2440.c
+++ b/arch/arm/mach-s3c24xx/mach-mini2440.c
@@ -39,14 +39,14 @@
 
 #include <plat/regs-serial.h>
 #include <mach/regs-gpio.h>
-#include <mach/leds-gpio.h>
+#include <linux/platform_data/leds-s3c24xx.h>
 #include <mach/regs-mem.h>
 #include <mach/regs-lcd.h>
 #include <mach/irqs.h>
-#include <plat/nand.h>
-#include <plat/iic.h>
-#include <plat/mci.h>
-#include <plat/udc.h>
+#include <linux/platform_data/mtd-nand-s3c2410.h>
+#include <linux/platform_data/i2c-s3c2410.h>
+#include <linux/platform_data/mmc-s3cmci.h>
+#include <linux/platform_data/usb-s3c2410_udc.h>
 
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/nand.h>
diff --git a/arch/arm/mach-s3c24xx/mach-n30.c b/arch/arm/mach-s3c24xx/mach-n30.c
index 383d00c..c53a9bf 100644
--- a/arch/arm/mach-s3c24xx/mach-n30.c
+++ b/arch/arm/mach-s3c24xx/mach-n30.c
@@ -33,7 +33,7 @@
 #include <asm/mach-types.h>
 
 #include <mach/fb.h>
-#include <mach/leds-gpio.h>
+#include <linux/platform_data/leds-s3c24xx.h>
 #include <mach/regs-gpio.h>
 #include <mach/regs-lcd.h>
 
@@ -41,15 +41,15 @@
 #include <asm/mach/irq.h>
 #include <asm/mach/map.h>
 
-#include <plat/iic.h>
+#include <linux/platform_data/i2c-s3c2410.h>
 #include <plat/regs-serial.h>
 
 #include <plat/clock.h>
 #include <plat/cpu.h>
 #include <plat/devs.h>
-#include <plat/mci.h>
+#include <linux/platform_data/mmc-s3cmci.h>
 #include <plat/s3c2410.h>
-#include <plat/udc.h>
+#include <linux/platform_data/usb-s3c2410_udc.h>
 
 #include "common.h"
 
diff --git a/arch/arm/mach-s3c24xx/mach-nexcoder.c b/arch/arm/mach-s3c24xx/mach-nexcoder.c
index 5c05ba1..7841321 100644
--- a/arch/arm/mach-s3c24xx/mach-nexcoder.c
+++ b/arch/arm/mach-s3c24xx/mach-nexcoder.c
@@ -38,7 +38,7 @@
 //#include <asm/debug-ll.h>
 #include <mach/regs-gpio.h>
 #include <plat/regs-serial.h>
-#include <plat/iic.h>
+#include <linux/platform_data/i2c-s3c2410.h>
 
 #include <plat/gpio-cfg.h>
 #include <plat/s3c2410.h>
diff --git a/arch/arm/mach-s3c24xx/mach-osiris.c b/arch/arm/mach-s3c24xx/mach-osiris.c
index 95d0772..63c2001 100644
--- a/arch/arm/mach-s3c24xx/mach-osiris.c
+++ b/arch/arm/mach-s3c24xx/mach-osiris.c
@@ -41,8 +41,8 @@
 #include <mach/regs-gpio.h>
 #include <mach/regs-mem.h>
 #include <mach/regs-lcd.h>
-#include <plat/nand.h>
-#include <plat/iic.h>
+#include <linux/platform_data/mtd-nand-s3c2410.h>
+#include <linux/platform_data/i2c-s3c2410.h>
 
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/nand.h>
diff --git a/arch/arm/mach-s3c24xx/mach-otom.c b/arch/arm/mach-s3c24xx/mach-otom.c
index bc4b6ef..bca39f0 100644
--- a/arch/arm/mach-s3c24xx/mach-otom.c
+++ b/arch/arm/mach-s3c24xx/mach-otom.c
@@ -35,7 +35,7 @@
 #include <plat/s3c2410.h>
 #include <plat/clock.h>
 #include <plat/devs.h>
-#include <plat/iic.h>
+#include <linux/platform_data/i2c-s3c2410.h>
 #include <plat/cpu.h>
 
 #include "common.h"
diff --git a/arch/arm/mach-s3c24xx/mach-qt2410.c b/arch/arm/mach-s3c24xx/mach-qt2410.c
index 678bbca..7b6ba13 100644
--- a/arch/arm/mach-s3c24xx/mach-qt2410.c
+++ b/arch/arm/mach-s3c24xx/mach-qt2410.c
@@ -47,13 +47,13 @@
 #include <asm/irq.h>
 #include <asm/mach-types.h>
 
-#include <mach/leds-gpio.h>
+#include <linux/platform_data/leds-s3c24xx.h>
 #include <mach/regs-lcd.h>
 #include <plat/regs-serial.h>
 #include <mach/fb.h>
-#include <plat/nand.h>
-#include <plat/udc.h>
-#include <plat/iic.h>
+#include <linux/platform_data/mtd-nand-s3c2410.h>
+#include <linux/platform_data/usb-s3c2410_udc.h>
+#include <linux/platform_data/i2c-s3c2410.h>
 
 #include <plat/common-smdk.h>
 #include <plat/gpio-cfg.h>
diff --git a/arch/arm/mach-s3c24xx/mach-rx1950.c b/arch/arm/mach-s3c24xx/mach-rx1950.c
index 7ee73f2..379fde5 100644
--- a/arch/arm/mach-s3c24xx/mach-rx1950.c
+++ b/arch/arm/mach-s3c24xx/mach-rx1950.c
@@ -49,15 +49,15 @@
 #include <plat/clock.h>
 #include <plat/regs-serial.h>
 #include <plat/regs-iic.h>
-#include <plat/mci.h>
-#include <plat/udc.h>
-#include <plat/nand.h>
-#include <plat/iic.h>
+#include <linux/platform_data/mmc-s3cmci.h>
+#include <linux/platform_data/usb-s3c2410_udc.h>
+#include <linux/platform_data/mtd-nand-s3c2410.h>
+#include <linux/platform_data/i2c-s3c2410.h>
 #include <plat/devs.h>
 #include <plat/cpu.h>
 #include <plat/pm.h>
 #include <plat/irq.h>
-#include <plat/ts.h>
+#include <linux/platform_data/touchscreen-s3c2410.h>
 
 #include <sound/uda1380.h>
 
diff --git a/arch/arm/mach-s3c24xx/mach-rx3715.c b/arch/arm/mach-s3c24xx/mach-rx3715.c
index 56af354..dacbb9a 100644
--- a/arch/arm/mach-s3c24xx/mach-rx3715.c
+++ b/arch/arm/mach-s3c24xx/mach-rx3715.c
@@ -43,7 +43,7 @@
 #include <mach/regs-lcd.h>
 
 #include <mach/h1940.h>
-#include <plat/nand.h>
+#include <linux/platform_data/mtd-nand-s3c2410.h>
 #include <mach/fb.h>
 
 #include <plat/clock.h>
diff --git a/arch/arm/mach-s3c24xx/mach-smdk2410.c b/arch/arm/mach-s3c24xx/mach-smdk2410.c
index bdc27e7..82796b9 100644
--- a/arch/arm/mach-s3c24xx/mach-smdk2410.c
+++ b/arch/arm/mach-s3c24xx/mach-smdk2410.c
@@ -47,7 +47,7 @@
 #include <asm/mach-types.h>
 
 #include <plat/regs-serial.h>
-#include <plat/iic.h>
+#include <linux/platform_data/i2c-s3c2410.h>
 
 #include <plat/devs.h>
 #include <plat/cpu.h>
diff --git a/arch/arm/mach-s3c24xx/mach-smdk2413.c b/arch/arm/mach-s3c24xx/mach-smdk2413.c
index b11451b..ce99fd8 100644
--- a/arch/arm/mach-s3c24xx/mach-smdk2413.c
+++ b/arch/arm/mach-s3c24xx/mach-smdk2413.c
@@ -38,8 +38,8 @@
 #include <mach/regs-lcd.h>
 
 #include <mach/idle.h>
-#include <plat/udc.h>
-#include <plat/iic.h>
+#include <linux/platform_data/usb-s3c2410_udc.h>
+#include <linux/platform_data/i2c-s3c2410.h>
 #include <mach/fb.h>
 
 #include <plat/s3c2410.h>
diff --git a/arch/arm/mach-s3c24xx/mach-smdk2416.c b/arch/arm/mach-s3c24xx/mach-smdk2416.c
index c3100a0..db2787a 100644
--- a/arch/arm/mach-s3c24xx/mach-smdk2416.c
+++ b/arch/arm/mach-s3c24xx/mach-smdk2416.c
@@ -39,17 +39,17 @@
 #include <mach/regs-s3c2443-clock.h>
 
 #include <mach/idle.h>
-#include <mach/leds-gpio.h>
-#include <plat/iic.h>
+#include <linux/platform_data/leds-s3c24xx.h>
+#include <linux/platform_data/i2c-s3c2410.h>
 
 #include <plat/s3c2416.h>
 #include <plat/gpio-cfg.h>
 #include <plat/clock.h>
 #include <plat/devs.h>
 #include <plat/cpu.h>
-#include <plat/nand.h>
+#include <linux/platform_data/mtd-nand-s3c2410.h>
 #include <plat/sdhci.h>
-#include <plat/udc.h>
+#include <linux/platform_data/usb-s3c2410_udc.h>
 #include <linux/platform_data/s3c-hsudc.h>
 
 #include <plat/regs-fb-v4.h>
diff --git a/arch/arm/mach-s3c24xx/mach-smdk2440.c b/arch/arm/mach-s3c24xx/mach-smdk2440.c
index 83a1036..b7ff882 100644
--- a/arch/arm/mach-s3c24xx/mach-smdk2440.c
+++ b/arch/arm/mach-s3c24xx/mach-smdk2440.c
@@ -37,7 +37,7 @@
 
 #include <mach/idle.h>
 #include <mach/fb.h>
-#include <plat/iic.h>
+#include <linux/platform_data/i2c-s3c2410.h>
 
 #include <plat/s3c2410.h>
 #include <plat/s3c244x.h>
diff --git a/arch/arm/mach-s3c24xx/mach-smdk2443.c b/arch/arm/mach-s3c24xx/mach-smdk2443.c
index 2092369..2568656 100644
--- a/arch/arm/mach-s3c24xx/mach-smdk2443.c
+++ b/arch/arm/mach-s3c24xx/mach-smdk2443.c
@@ -37,7 +37,7 @@
 
 #include <mach/idle.h>
 #include <mach/fb.h>
-#include <plat/iic.h>
+#include <linux/platform_data/i2c-s3c2410.h>
 
 #include <plat/s3c2410.h>
 #include <plat/s3c2443.h>
diff --git a/arch/arm/mach-s3c24xx/mach-tct_hammer.c b/arch/arm/mach-s3c24xx/mach-tct_hammer.c
index fe99028..495bf5c 100644
--- a/arch/arm/mach-s3c24xx/mach-tct_hammer.c
+++ b/arch/arm/mach-s3c24xx/mach-tct_hammer.c
@@ -45,7 +45,7 @@
 #include <asm/mach-types.h>
 
 #include <plat/regs-serial.h>
-#include <plat/iic.h>
+#include <linux/platform_data/i2c-s3c2410.h>
 #include <plat/devs.h>
 #include <plat/cpu.h>
 
diff --git a/arch/arm/mach-s3c24xx/mach-vr1000.c b/arch/arm/mach-s3c24xx/mach-vr1000.c
index bd5f189..14d5b12 100644
--- a/arch/arm/mach-s3c24xx/mach-vr1000.c
+++ b/arch/arm/mach-s3c24xx/mach-vr1000.c
@@ -43,13 +43,13 @@
 
 #include <plat/regs-serial.h>
 #include <mach/regs-gpio.h>
-#include <mach/leds-gpio.h>
+#include <linux/platform_data/leds-s3c24xx.h>
 
 #include <plat/clock.h>
 #include <plat/devs.h>
 #include <plat/cpu.h>
-#include <plat/iic.h>
-#include <plat/audio-simtec.h>
+#include <linux/platform_data/i2c-s3c2410.h>
+#include <linux/platform_data/asoc-s3c24xx_simtec.h>
 
 #include "simtec.h"
 #include "common.h"
diff --git a/arch/arm/mach-s3c24xx/mach-vstms.c b/arch/arm/mach-s3c24xx/mach-vstms.c
index 94bfaa1..f1d44ae 100644
--- a/arch/arm/mach-s3c24xx/mach-vstms.c
+++ b/arch/arm/mach-s3c24xx/mach-vstms.c
@@ -39,8 +39,8 @@
 #include <mach/idle.h>
 #include <mach/fb.h>
 
-#include <plat/iic.h>
-#include <plat/nand.h>
+#include <linux/platform_data/i2c-s3c2410.h>
+#include <linux/platform_data/mtd-nand-s3c2410.h>
 
 #include <plat/s3c2410.h>
 #include <plat/s3c2412.h>
diff --git a/arch/arm/mach-s3c24xx/setup-i2c.c b/arch/arm/mach-s3c24xx/setup-i2c.c
index 9e90a7c..7b4f333 100644
--- a/arch/arm/mach-s3c24xx/setup-i2c.c
+++ b/arch/arm/mach-s3c24xx/setup-i2c.c
@@ -16,7 +16,7 @@
 struct platform_device;
 
 #include <plat/gpio-cfg.h>
-#include <plat/iic.h>
+#include <linux/platform_data/i2c-s3c2410.h>
 #include <mach/hardware.h>
 #include <mach/regs-gpio.h>
 
diff --git a/arch/arm/mach-s3c24xx/simtec-audio.c b/arch/arm/mach-s3c24xx/simtec-audio.c
index 11881c9..fd0ef05 100644
--- a/arch/arm/mach-s3c24xx/simtec-audio.c
+++ b/arch/arm/mach-s3c24xx/simtec-audio.c
@@ -24,7 +24,7 @@
 #include <mach/hardware.h>
 #include <mach/regs-gpio.h>
 
-#include <plat/audio-simtec.h>
+#include <linux/platform_data/asoc-s3c24xx_simtec.h>
 #include <plat/devs.h>
 
 #include "simtec.h"
diff --git a/arch/arm/mach-s3c24xx/simtec-usb.c b/arch/arm/mach-s3c24xx/simtec-usb.c
index d91c1a7..17f8356 100644
--- a/arch/arm/mach-s3c24xx/simtec-usb.c
+++ b/arch/arm/mach-s3c24xx/simtec-usb.c
@@ -34,7 +34,7 @@
 #include <mach/hardware.h>
 #include <asm/irq.h>
 
-#include <plat/usb-control.h>
+#include <linux/platform_data/usb-ohci-s3c2410.h>
 #include <plat/devs.h>
 
 #include "simtec.h"
diff --git a/arch/arm/mach-s3c64xx/dev-audio.c b/arch/arm/mach-s3c64xx/dev-audio.c
index 124fd5d..35f3e07 100644
--- a/arch/arm/mach-s3c64xx/dev-audio.c
+++ b/arch/arm/mach-s3c64xx/dev-audio.c
@@ -20,7 +20,7 @@
 #include <mach/dma.h>
 
 #include <plat/devs.h>
-#include <plat/audio.h>
+#include <linux/platform_data/asoc-s3c.h>
 #include <plat/gpio-cfg.h>
 
 static const char *rclksrc[] = {
diff --git a/arch/arm/mach-s3c64xx/mach-anw6410.c b/arch/arm/mach-s3c64xx/mach-anw6410.c
index ffa29dd..15c58df 100644
--- a/arch/arm/mach-s3c64xx/mach-anw6410.c
+++ b/arch/arm/mach-s3c64xx/mach-anw6410.c
@@ -42,7 +42,7 @@
 #include <asm/mach-types.h>
 
 #include <plat/regs-serial.h>
-#include <plat/iic.h>
+#include <linux/platform_data/i2c-s3c2410.h>
 #include <plat/fb.h>
 #include <plat/regs-fb-v4.h>
 
diff --git a/arch/arm/mach-s3c64xx/mach-crag6410-module.c b/arch/arm/mach-s3c64xx/mach-crag6410-module.c
index 9e382e7..181aa99 100644
--- a/arch/arm/mach-s3c64xx/mach-crag6410-module.c
+++ b/arch/arm/mach-s3c64xx/mach-crag6410-module.c
@@ -24,7 +24,7 @@
 #include <sound/wm8962.h>
 #include <sound/wm9081.h>
 
-#include <plat/s3c64xx-spi.h>
+#include <linux/platform_data/spi-s3c64xx.h>
 
 #include <mach/crag6410.h>
 
diff --git a/arch/arm/mach-s3c64xx/mach-crag6410.c b/arch/arm/mach-s3c64xx/mach-crag6410.c
index 09cd812..717d675 100644
--- a/arch/arm/mach-s3c64xx/mach-crag6410.c
+++ b/arch/arm/mach-s3c64xx/mach-crag6410.c
@@ -61,14 +61,14 @@
 #include <plat/fb.h>
 #include <plat/sdhci.h>
 #include <plat/gpio-cfg.h>
-#include <plat/s3c64xx-spi.h>
+#include <linux/platform_data/spi-s3c64xx.h>
 
 #include <plat/keypad.h>
 #include <plat/clock.h>
 #include <plat/devs.h>
 #include <plat/cpu.h>
 #include <plat/adc.h>
-#include <plat/iic.h>
+#include <linux/platform_data/i2c-s3c2410.h>
 #include <plat/pm.h>
 
 #include "common.h"
diff --git a/arch/arm/mach-s3c64xx/mach-hmt.c b/arch/arm/mach-s3c64xx/mach-hmt.c
index 6890881..02222b3 100644
--- a/arch/arm/mach-s3c64xx/mach-hmt.c
+++ b/arch/arm/mach-s3c64xx/mach-hmt.c
@@ -34,9 +34,9 @@
 #include <asm/mach-types.h>
 
 #include <plat/regs-serial.h>
-#include <plat/iic.h>
+#include <linux/platform_data/i2c-s3c2410.h>
 #include <plat/fb.h>
-#include <plat/nand.h>
+#include <linux/platform_data/mtd-nand-s3c2410.h>
 
 #include <plat/clock.h>
 #include <plat/devs.h>
diff --git a/arch/arm/mach-s3c64xx/mach-mini6410.c b/arch/arm/mach-s3c64xx/mach-mini6410.c
index 5539a255..09311cc 100644
--- a/arch/arm/mach-s3c64xx/mach-mini6410.c
+++ b/arch/arm/mach-s3c64xx/mach-mini6410.c
@@ -38,9 +38,9 @@
 #include <plat/cpu.h>
 #include <plat/devs.h>
 #include <plat/fb.h>
-#include <plat/nand.h>
+#include <linux/platform_data/mtd-nand-s3c2410.h>
 #include <plat/regs-serial.h>
-#include <plat/ts.h>
+#include <linux/platform_data/touchscreen-s3c2410.h>
 #include <plat/regs-fb-v4.h>
 
 #include <video/platform_lcd.h>
diff --git a/arch/arm/mach-s3c64xx/mach-ncp.c b/arch/arm/mach-s3c64xx/mach-ncp.c
index cad2e05..46ee88d 100644
--- a/arch/arm/mach-s3c64xx/mach-ncp.c
+++ b/arch/arm/mach-s3c64xx/mach-ncp.c
@@ -37,7 +37,7 @@
 #include <asm/mach-types.h>
 
 #include <plat/regs-serial.h>
-#include <plat/iic.h>
+#include <linux/platform_data/i2c-s3c2410.h>
 #include <plat/fb.h>
 
 #include <plat/clock.h>
diff --git a/arch/arm/mach-s3c64xx/mach-real6410.c b/arch/arm/mach-s3c64xx/mach-real6410.c
index 326b216..6daca20 100644
--- a/arch/arm/mach-s3c64xx/mach-real6410.c
+++ b/arch/arm/mach-s3c64xx/mach-real6410.c
@@ -39,9 +39,9 @@
 #include <plat/cpu.h>
 #include <plat/devs.h>
 #include <plat/fb.h>
-#include <plat/nand.h>
+#include <linux/platform_data/mtd-nand-s3c2410.h>
 #include <plat/regs-serial.h>
-#include <plat/ts.h>
+#include <linux/platform_data/touchscreen-s3c2410.h>
 #include <plat/regs-fb-v4.h>
 
 #include <video/platform_lcd.h>
diff --git a/arch/arm/mach-s3c64xx/mach-smartq.c b/arch/arm/mach-s3c64xx/mach-smartq.c
index ceeb1de..c6d7390 100644
--- a/arch/arm/mach-s3c64xx/mach-smartq.c
+++ b/arch/arm/mach-s3c64xx/mach-smartq.c
@@ -30,13 +30,13 @@
 #include <plat/clock.h>
 #include <plat/cpu.h>
 #include <plat/devs.h>
-#include <plat/iic.h>
+#include <linux/platform_data/i2c-s3c2410.h>
 #include <plat/gpio-cfg.h>
-#include <plat/hwmon.h>
+#include <linux/platform_data/hwmon-s3c.h>
 #include <plat/regs-serial.h>
-#include <plat/usb-control.h>
+#include <linux/platform_data/usb-ohci-s3c2410.h>
 #include <plat/sdhci.h>
-#include <plat/ts.h>
+#include <linux/platform_data/touchscreen-s3c2410.h>
 
 #include <video/platform_lcd.h>
 
diff --git a/arch/arm/mach-s3c64xx/mach-smdk6400.c b/arch/arm/mach-s3c64xx/mach-smdk6400.c
index b0f4525..a928fae 100644
--- a/arch/arm/mach-s3c64xx/mach-smdk6400.c
+++ b/arch/arm/mach-s3c64xx/mach-smdk6400.c
@@ -35,7 +35,7 @@
 #include <plat/clock.h>
 #include <plat/devs.h>
 #include <plat/cpu.h>
-#include <plat/iic.h>
+#include <linux/platform_data/i2c-s3c2410.h>
 
 #include "common.h"
 
diff --git a/arch/arm/mach-s3c64xx/mach-smdk6410.c b/arch/arm/mach-s3c64xx/mach-smdk6410.c
index 0fe4f15..2547a88 100644
--- a/arch/arm/mach-s3c64xx/mach-smdk6410.c
+++ b/arch/arm/mach-s3c64xx/mach-smdk6410.c
@@ -60,8 +60,8 @@
 #include <mach/regs-gpio.h>
 #include <mach/regs-sys.h>
 #include <mach/regs-srom.h>
-#include <plat/ata.h>
-#include <plat/iic.h>
+#include <linux/platform_data/ata-samsung_cf.h>
+#include <linux/platform_data/i2c-s3c2410.h>
 #include <plat/fb.h>
 #include <plat/gpio-cfg.h>
 
@@ -69,7 +69,7 @@
 #include <plat/devs.h>
 #include <plat/cpu.h>
 #include <plat/adc.h>
-#include <plat/ts.h>
+#include <linux/platform_data/touchscreen-s3c2410.h>
 #include <plat/keypad.h>
 #include <plat/backlight.h>
 #include <plat/regs-fb-v4.h>
diff --git a/arch/arm/mach-s3c64xx/setup-i2c0.c b/arch/arm/mach-s3c64xx/setup-i2c0.c
index 241af94..40666ba 100644
--- a/arch/arm/mach-s3c64xx/setup-i2c0.c
+++ b/arch/arm/mach-s3c64xx/setup-i2c0.c
@@ -18,7 +18,7 @@
 
 struct platform_device; /* don't need the contents */
 
-#include <plat/iic.h>
+#include <linux/platform_data/i2c-s3c2410.h>
 #include <plat/gpio-cfg.h>
 
 void s3c_i2c0_cfg_gpio(struct platform_device *dev)
diff --git a/arch/arm/mach-s3c64xx/setup-i2c1.c b/arch/arm/mach-s3c64xx/setup-i2c1.c
index 3d13a96..3fdb24c 100644
--- a/arch/arm/mach-s3c64xx/setup-i2c1.c
+++ b/arch/arm/mach-s3c64xx/setup-i2c1.c
@@ -18,7 +18,7 @@
 
 struct platform_device; /* don't need the contents */
 
-#include <plat/iic.h>
+#include <linux/platform_data/i2c-s3c2410.h>
 #include <plat/gpio-cfg.h>
 
 void s3c_i2c1_cfg_gpio(struct platform_device *dev)
diff --git a/arch/arm/mach-s3c64xx/setup-ide.c b/arch/arm/mach-s3c64xx/setup-ide.c
index 41b4256..648d8b8 100644
--- a/arch/arm/mach-s3c64xx/setup-ide.c
+++ b/arch/arm/mach-s3c64xx/setup-ide.c
@@ -17,7 +17,7 @@
 #include <mach/map.h>
 #include <mach/regs-clock.h>
 #include <plat/gpio-cfg.h>
-#include <plat/ata.h>
+#include <linux/platform_data/ata-samsung_cf.h>
 
 void s3c64xx_ide_setup_gpio(void)
 {
diff --git a/arch/arm/mach-s5p64x0/dev-audio.c b/arch/arm/mach-s5p64x0/dev-audio.c
index 91113dd..a0d6edf 100644
--- a/arch/arm/mach-s5p64x0/dev-audio.c
+++ b/arch/arm/mach-s5p64x0/dev-audio.c
@@ -13,7 +13,7 @@
 #include <linux/gpio.h>
 
 #include <plat/gpio-cfg.h>
-#include <plat/audio.h>
+#include <linux/platform_data/asoc-s3c.h>
 
 #include <mach/map.h>
 #include <mach/dma.h>
diff --git a/arch/arm/mach-s5p64x0/mach-smdk6440.c b/arch/arm/mach-s5p64x0/mach-smdk6440.c
index 92fefad..dea78a8 100644
--- a/arch/arm/mach-s5p64x0/mach-smdk6440.c
+++ b/arch/arm/mach-s5p64x0/mach-smdk6440.c
@@ -45,10 +45,10 @@
 #include <plat/clock.h>
 #include <plat/devs.h>
 #include <plat/cpu.h>
-#include <plat/iic.h>
+#include <linux/platform_data/i2c-s3c2410.h>
 #include <plat/pll.h>
 #include <plat/adc.h>
-#include <plat/ts.h>
+#include <linux/platform_data/touchscreen-s3c2410.h>
 #include <plat/s5p-time.h>
 #include <plat/backlight.h>
 #include <plat/fb.h>
diff --git a/arch/arm/mach-s5p64x0/mach-smdk6450.c b/arch/arm/mach-s5p64x0/mach-smdk6450.c
index e2335ec..6f14fc7 100644
--- a/arch/arm/mach-s5p64x0/mach-smdk6450.c
+++ b/arch/arm/mach-s5p64x0/mach-smdk6450.c
@@ -45,10 +45,10 @@
 #include <plat/clock.h>
 #include <plat/devs.h>
 #include <plat/cpu.h>
-#include <plat/iic.h>
+#include <linux/platform_data/i2c-s3c2410.h>
 #include <plat/pll.h>
 #include <plat/adc.h>
-#include <plat/ts.h>
+#include <linux/platform_data/touchscreen-s3c2410.h>
 #include <plat/s5p-time.h>
 #include <plat/backlight.h>
 #include <plat/fb.h>
diff --git a/arch/arm/mach-s5p64x0/setup-i2c0.c b/arch/arm/mach-s5p64x0/setup-i2c0.c
index 46b4639..a32edc5 100644
--- a/arch/arm/mach-s5p64x0/setup-i2c0.c
+++ b/arch/arm/mach-s5p64x0/setup-i2c0.c
@@ -19,7 +19,7 @@
 struct platform_device; /* don't need the contents */
 
 #include <plat/gpio-cfg.h>
-#include <plat/iic.h>
+#include <linux/platform_data/i2c-s3c2410.h>
 
 #include <mach/i2c.h>
 
diff --git a/arch/arm/mach-s5p64x0/setup-i2c1.c b/arch/arm/mach-s5p64x0/setup-i2c1.c
index 6ad3b98..ca2c5c7 100644
--- a/arch/arm/mach-s5p64x0/setup-i2c1.c
+++ b/arch/arm/mach-s5p64x0/setup-i2c1.c
@@ -19,7 +19,7 @@
 struct platform_device; /* don't need the contents */
 
 #include <plat/gpio-cfg.h>
-#include <plat/iic.h>
+#include <linux/platform_data/i2c-s3c2410.h>
 
 #include <mach/i2c.h>
 
diff --git a/arch/arm/mach-s5pc100/dev-audio.c b/arch/arm/mach-s5pc100/dev-audio.c
index 9d4bde3..1cc252c 100644
--- a/arch/arm/mach-s5pc100/dev-audio.c
+++ b/arch/arm/mach-s5pc100/dev-audio.c
@@ -13,7 +13,7 @@
 #include <linux/gpio.h>
 
 #include <plat/gpio-cfg.h>
-#include <plat/audio.h>
+#include <linux/platform_data/asoc-s3c.h>
 
 #include <mach/map.h>
 #include <mach/dma.h>
diff --git a/arch/arm/mach-s5pc100/mach-smdkc100.c b/arch/arm/mach-s5pc100/mach-smdkc100.c
index 0c3ae38..5d2c093 100644
--- a/arch/arm/mach-s5pc100/mach-smdkc100.c
+++ b/arch/arm/mach-s5pc100/mach-smdkc100.c
@@ -44,12 +44,12 @@
 #include <plat/devs.h>
 #include <plat/cpu.h>
 #include <plat/fb.h>
-#include <plat/iic.h>
-#include <plat/ata.h>
+#include <linux/platform_data/i2c-s3c2410.h>
+#include <linux/platform_data/ata-samsung_cf.h>
 #include <plat/adc.h>
 #include <plat/keypad.h>
-#include <plat/ts.h>
-#include <plat/audio.h>
+#include <linux/platform_data/touchscreen-s3c2410.h>
+#include <linux/platform_data/asoc-s3c.h>
 #include <plat/backlight.h>
 #include <plat/regs-fb-v4.h>
 
diff --git a/arch/arm/mach-s5pc100/setup-i2c0.c b/arch/arm/mach-s5pc100/setup-i2c0.c
index eaef7a3..89a6a76 100644
--- a/arch/arm/mach-s5pc100/setup-i2c0.c
+++ b/arch/arm/mach-s5pc100/setup-i2c0.c
@@ -18,7 +18,7 @@
 struct platform_device; /* don't need the contents */
 
 #include <linux/gpio.h>
-#include <plat/iic.h>
+#include <linux/platform_data/i2c-s3c2410.h>
 #include <plat/gpio-cfg.h>
 
 void s3c_i2c0_cfg_gpio(struct platform_device *dev)
diff --git a/arch/arm/mach-s5pc100/setup-i2c1.c b/arch/arm/mach-s5pc100/setup-i2c1.c
index aaff74a..faa667e 100644
--- a/arch/arm/mach-s5pc100/setup-i2c1.c
+++ b/arch/arm/mach-s5pc100/setup-i2c1.c
@@ -18,7 +18,7 @@
 struct platform_device; /* don't need the contents */
 
 #include <linux/gpio.h>
-#include <plat/iic.h>
+#include <linux/platform_data/i2c-s3c2410.h>
 #include <plat/gpio-cfg.h>
 
 void s3c_i2c1_cfg_gpio(struct platform_device *dev)
diff --git a/arch/arm/mach-s5pv210/dev-audio.c b/arch/arm/mach-s5pv210/dev-audio.c
index 8367749..0a5480b 100644
--- a/arch/arm/mach-s5pv210/dev-audio.c
+++ b/arch/arm/mach-s5pv210/dev-audio.c
@@ -13,7 +13,7 @@
 #include <linux/gpio.h>
 
 #include <plat/gpio-cfg.h>
-#include <plat/audio.h>
+#include <linux/platform_data/asoc-s3c.h>
 
 #include <mach/map.h>
 #include <mach/dma.h>
diff --git a/arch/arm/mach-s5pv210/mach-goni.c b/arch/arm/mach-s5pv210/mach-goni.c
index 822a559..00f1e47 100644
--- a/arch/arm/mach-s5pv210/mach-goni.c
+++ b/arch/arm/mach-s5pv210/mach-goni.c
@@ -43,7 +43,7 @@
 #include <plat/devs.h>
 #include <plat/cpu.h>
 #include <plat/fb.h>
-#include <plat/iic.h>
+#include <linux/platform_data/i2c-s3c2410.h>
 #include <plat/keypad.h>
 #include <plat/sdhci.h>
 #include <plat/clock.h>
diff --git a/arch/arm/mach-s5pv210/mach-smdkc110.c b/arch/arm/mach-s5pv210/mach-smdkc110.c
index dfc2923..d9c99fc 100644
--- a/arch/arm/mach-s5pv210/mach-smdkc110.c
+++ b/arch/arm/mach-s5pv210/mach-smdkc110.c
@@ -27,8 +27,8 @@
 #include <plat/regs-serial.h>
 #include <plat/devs.h>
 #include <plat/cpu.h>
-#include <plat/ata.h>
-#include <plat/iic.h>
+#include <linux/platform_data/ata-samsung_cf.h>
+#include <linux/platform_data/i2c-s3c2410.h>
 #include <plat/pm.h>
 #include <plat/s5p-time.h>
 #include <plat/mfc.h>
diff --git a/arch/arm/mach-s5pv210/mach-smdkv210.c b/arch/arm/mach-s5pv210/mach-smdkv210.c
index 918b23d..7d6fab4 100644
--- a/arch/arm/mach-s5pv210/mach-smdkv210.c
+++ b/arch/arm/mach-s5pv210/mach-smdkv210.c
@@ -38,9 +38,9 @@
 #include <plat/devs.h>
 #include <plat/cpu.h>
 #include <plat/adc.h>
-#include <plat/ts.h>
-#include <plat/ata.h>
-#include <plat/iic.h>
+#include <linux/platform_data/touchscreen-s3c2410.h>
+#include <linux/platform_data/ata-samsung_cf.h>
+#include <linux/platform_data/i2c-s3c2410.h>
 #include <plat/keypad.h>
 #include <plat/pm.h>
 #include <plat/fb.h>
diff --git a/arch/arm/mach-s5pv210/mach-torbreck.c b/arch/arm/mach-s5pv210/mach-torbreck.c
index 74e99bc..18785cb 100644
--- a/arch/arm/mach-s5pv210/mach-torbreck.c
+++ b/arch/arm/mach-s5pv210/mach-torbreck.c
@@ -26,7 +26,7 @@
 #include <plat/regs-serial.h>
 #include <plat/devs.h>
 #include <plat/cpu.h>
-#include <plat/iic.h>
+#include <linux/platform_data/i2c-s3c2410.h>
 #include <plat/s5p-time.h>
 
 #include "common.h"
diff --git a/arch/arm/mach-s5pv210/setup-i2c0.c b/arch/arm/mach-s5pv210/setup-i2c0.c
index 0f1cc3a..4a15849 100644
--- a/arch/arm/mach-s5pv210/setup-i2c0.c
+++ b/arch/arm/mach-s5pv210/setup-i2c0.c
@@ -18,7 +18,7 @@
 
 struct platform_device; /* don't need the contents */
 
-#include <plat/iic.h>
+#include <linux/platform_data/i2c-s3c2410.h>
 #include <plat/gpio-cfg.h>
 
 void s3c_i2c0_cfg_gpio(struct platform_device *dev)
diff --git a/arch/arm/mach-s5pv210/setup-i2c1.c b/arch/arm/mach-s5pv210/setup-i2c1.c
index f61365a..4777f6b 100644
--- a/arch/arm/mach-s5pv210/setup-i2c1.c
+++ b/arch/arm/mach-s5pv210/setup-i2c1.c
@@ -18,7 +18,7 @@
 
 struct platform_device; /* don't need the contents */
 
-#include <plat/iic.h>
+#include <linux/platform_data/i2c-s3c2410.h>
 #include <plat/gpio-cfg.h>
 
 void s3c_i2c1_cfg_gpio(struct platform_device *dev)
diff --git a/arch/arm/mach-s5pv210/setup-i2c2.c b/arch/arm/mach-s5pv210/setup-i2c2.c
index 2f91b5c..bbce6c7 100644
--- a/arch/arm/mach-s5pv210/setup-i2c2.c
+++ b/arch/arm/mach-s5pv210/setup-i2c2.c
@@ -18,7 +18,7 @@
 
 struct platform_device; /* don't need the contents */
 
-#include <plat/iic.h>
+#include <linux/platform_data/i2c-s3c2410.h>
 #include <plat/gpio-cfg.h>
 
 void s3c_i2c2_cfg_gpio(struct platform_device *dev)
diff --git a/arch/arm/plat-samsung/devs.c b/arch/arm/plat-samsung/devs.c
index 74e31ce..07913ac 100644
--- a/arch/arm/plat-samsung/devs.c
+++ b/arch/arm/plat-samsung/devs.c
@@ -46,24 +46,24 @@
 #include <plat/cpu.h>
 #include <plat/devs.h>
 #include <plat/adc.h>
-#include <plat/ata.h>
-#include <plat/ehci.h>
+#include <linux/platform_data/ata-samsung_cf.h>
+#include <linux/platform_data/usb-ehci-s5p.h>
 #include <plat/fb.h>
 #include <plat/fb-s3c2410.h>
-#include <plat/hwmon.h>
-#include <plat/iic.h>
+#include <linux/platform_data/hwmon-s3c.h>
+#include <linux/platform_data/i2c-s3c2410.h>
 #include <plat/keypad.h>
-#include <plat/mci.h>
-#include <plat/nand.h>
+#include <linux/platform_data/mmc-s3cmci.h>
+#include <linux/platform_data/mtd-nand-s3c2410.h>
 #include <plat/sdhci.h>
-#include <plat/ts.h>
-#include <plat/udc.h>
-#include <plat/usb-control.h>
+#include <linux/platform_data/touchscreen-s3c2410.h>
+#include <linux/platform_data/usb-s3c2410_udc.h>
+#include <linux/platform_data/usb-ohci-s3c2410.h>
 #include <plat/usb-phy.h>
 #include <plat/regs-iic.h>
 #include <plat/regs-serial.h>
 #include <plat/regs-spi.h>
-#include <plat/s3c64xx-spi.h>
+#include <linux/platform_data/spi-s3c64xx.h>
 
 static u64 samsung_device_dma_mask = DMA_BIT_MASK(32);
 
diff --git a/arch/arm/plat-samsung/include/plat/ata.h b/arch/arm/plat-samsung/include/plat/ata.h
deleted file mode 100644
index 2a3855a..0000000
--- a/arch/arm/plat-samsung/include/plat/ata.h
+++ /dev/null
@@ -1,36 +0,0 @@
-/* linux/arch/arm/plat-samsung/include/plat/ata.h
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * Samsung CF-ATA platform_device info
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_PLAT_ATA_H
-#define __ASM_PLAT_ATA_H __FILE__
-
-/**
- * struct s3c_ide_platdata - S3C IDE driver platform data.
- * @setup_gpio: Setup the external GPIO pins to the right state for data
- * transfer in true-ide mode.
- */
-struct s3c_ide_platdata {
-	void (*setup_gpio)(void);
-};
-
-/*
- * s3c_ide_set_platdata() - Setup the platform specifc data for IDE driver.
- * @pdata: Platform data for IDE driver.
- */
-extern void s3c_ide_set_platdata(struct s3c_ide_platdata *pdata);
-
-/* architecture-specific IDE configuration */
-extern void s3c64xx_ide_setup_gpio(void);
-extern void s5pc100_ide_setup_gpio(void);
-extern void s5pv210_ide_setup_gpio(void);
-
-#endif /*__ASM_PLAT_ATA_H */
diff --git a/arch/arm/plat-samsung/include/plat/audio-simtec.h b/arch/arm/plat-samsung/include/plat/audio-simtec.h
deleted file mode 100644
index 376af52..0000000
--- a/arch/arm/plat-samsung/include/plat/audio-simtec.h
+++ /dev/null
@@ -1,34 +0,0 @@
-/* arch/arm/plat-samsung/include/plat/audio-simtec.h
- *
- * Copyright 2008 Simtec Electronics
- *	http://armlinux.simtec.co.uk/
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * Simtec Audio support.
-*/
-
-/**
- * struct s3c24xx_audio_simtec_pdata - platform data for simtec audio
- * @use_mpllin: Select codec clock from MPLLin
- * @output_cdclk: Need to output CDCLK to the codec
- * @have_mic: Set if we have a MIC socket
- * @have_lout: Set if we have a LineOut socket
- * @amp_gpio: GPIO pin to enable the AMP
- * @amp_gain: Option GPIO to control AMP gain
- */
-struct s3c24xx_audio_simtec_pdata {
-	unsigned int	use_mpllin:1;
-	unsigned int	output_cdclk:1;
-
-	unsigned int	have_mic:1;
-	unsigned int	have_lout:1;
-
-	int		amp_gpio;
-	int		amp_gain[2];
-
-	void	(*startup)(void);
-};
diff --git a/arch/arm/plat-samsung/include/plat/audio.h b/arch/arm/plat-samsung/include/plat/audio.h
deleted file mode 100644
index aa9875f..0000000
--- a/arch/arm/plat-samsung/include/plat/audio.h
+++ /dev/null
@@ -1,59 +0,0 @@
-/* arch/arm/plat-samsung/include/plat/audio.h
- *
- * Copyright (c) 2009 Samsung Electronics Co. Ltd
- * Author: Jaswinder Singh <jassi.brar@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-/* The machine init code calls s3c*_ac97_setup_gpio with
- * one of these defines in order to select appropriate bank
- * of GPIO for AC97 pins
- */
-#define S3C64XX_AC97_GPD  0
-#define S3C64XX_AC97_GPE  1
-extern void s3c64xx_ac97_setup_gpio(int);
-
-/*
- * The machine init code calls s5p*_spdif_setup_gpio with
- * one of these defines in order to select appropriate bank
- * of GPIO for S/PDIF pins
- */
-#define S5PC100_SPDIF_GPD  0
-#define S5PC100_SPDIF_GPG3 1
-extern void s5pc100_spdif_setup_gpio(int);
-
-struct samsung_i2s {
-/* If the Primary DAI has 5.1 Channels */
-#define QUIRK_PRI_6CHAN		(1 << 0)
-/* If the I2S block has a Stereo Overlay Channel */
-#define QUIRK_SEC_DAI		(1 << 1)
-/*
- * If the I2S block has no internal prescalar or MUX (I2SMOD[10] bit)
- * The Machine driver must provide suitably set clock to the I2S block.
- */
-#define QUIRK_NO_MUXPSR		(1 << 2)
-#define QUIRK_NEED_RSTCLR	(1 << 3)
-	/* Quirks of the I2S controller */
-	u32 quirks;
-
-	/*
-	 * Array of clock names that can be used to generate I2S signals.
-	 * Also corresponds to clocks of I2SMOD[10]
-	 */
-	const char **src_clk;
-	dma_addr_t idma_addr;
-};
-
-/**
- * struct s3c_audio_pdata - common platform data for audio device drivers
- * @cfg_gpio: Callback function to setup mux'ed pins in I2S/PCM/AC97 mode
- */
-struct s3c_audio_pdata {
-	int (*cfg_gpio)(struct platform_device *);
-	union {
-		struct samsung_i2s i2s;
-	} type;
-};
diff --git a/arch/arm/plat-samsung/include/plat/ehci.h b/arch/arm/plat-samsung/include/plat/ehci.h
deleted file mode 100644
index 5f28cae..0000000
--- a/arch/arm/plat-samsung/include/plat/ehci.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/*
- * Copyright (C) 2011 Samsung Electronics Co.Ltd
- * Author: Joonyoung Shim <jy0922.shim@samsung.com>
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-#ifndef __PLAT_SAMSUNG_EHCI_H
-#define __PLAT_SAMSUNG_EHCI_H __FILE__
-
-struct s5p_ehci_platdata {
-	int (*phy_init)(struct platform_device *pdev, int type);
-	int (*phy_exit)(struct platform_device *pdev, int type);
-};
-
-extern void s5p_ehci_set_platdata(struct s5p_ehci_platdata *pd);
-
-#endif /* __PLAT_SAMSUNG_EHCI_H */
diff --git a/arch/arm/plat-samsung/include/plat/hwmon.h b/arch/arm/plat-samsung/include/plat/hwmon.h
deleted file mode 100644
index c167e44..0000000
--- a/arch/arm/plat-samsung/include/plat/hwmon.h
+++ /dev/null
@@ -1,51 +0,0 @@
-/* linux/arch/arm/plat-s3c/include/plat/hwmon.h
- *
- * Copyright 2005 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *	http://armlinux.simtec.co.uk/
- *
- * S3C - HWMon interface for ADC
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_ADC_HWMON_H
-#define __ASM_ARCH_ADC_HWMON_H __FILE__
-
-/**
- * s3c_hwmon_chcfg - channel configuration
- * @name: The name to give this channel.
- * @mult: Multiply the ADC value read by this.
- * @div: Divide the value from the ADC by this.
- *
- * The value read from the ADC is converted to a value that
- * hwmon expects (mV) by result = (value_read * @mult) / @div.
- */
-struct s3c_hwmon_chcfg {
-	const char	*name;
-	unsigned int	mult;
-	unsigned int	div;
-};
-
-/**
- * s3c_hwmon_pdata - HWMON platform data
- * @in: One configuration for each possible channel used.
- */
-struct s3c_hwmon_pdata {
-	struct s3c_hwmon_chcfg	*in[8];
-};
-
-/**
- * s3c_hwmon_set_platdata - Set platform data for S3C HWMON device
- * @pd: Platform data to register to device.
- *
- * Register the given platform data for use with the S3C HWMON device.
- * The call will copy the platform data, so the board definitions can
- * make the structure itself __initdata.
- */
-extern void __init s3c_hwmon_set_platdata(struct s3c_hwmon_pdata *pd);
-
-#endif /* __ASM_ARCH_ADC_HWMON_H */
-
diff --git a/arch/arm/plat-samsung/include/plat/iic.h b/arch/arm/plat-samsung/include/plat/iic.h
deleted file mode 100644
index 51d52e7..0000000
--- a/arch/arm/plat-samsung/include/plat/iic.h
+++ /dev/null
@@ -1,77 +0,0 @@
-/* arch/arm/plat-s3c/include/plat/iic.h
- *
- * Copyright 2004-2009 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C - I2C Controller platform_device info
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_IIC_H
-#define __ASM_ARCH_IIC_H __FILE__
-
-#define S3C_IICFLG_FILTER	(1<<0)	/* enable s3c2440 filter */
-
-/**
- *	struct s3c2410_platform_i2c - Platform data for s3c I2C.
- *	@bus_num: The bus number to use (if possible).
- *	@flags: Any flags for the I2C bus (E.g. S3C_IICFLK_FILTER).
- *	@slave_addr: The I2C address for the slave device (if enabled).
- *	@frequency: The desired frequency in Hz of the bus.  This is
- *                  guaranteed to not be exceeded.  If the caller does
- *                  not care, use zero and the driver will select a
- *                  useful default.
- *	@sda_delay: The delay (in ns) applied to SDA edges.
- *	@cfg_gpio: A callback to configure the pins for I2C operation.
- */
-struct s3c2410_platform_i2c {
-	int		bus_num;
-	unsigned int	flags;
-	unsigned int	slave_addr;
-	unsigned long	frequency;
-	unsigned int	sda_delay;
-
-	void	(*cfg_gpio)(struct platform_device *dev);
-};
-
-/**
- * s3c_i2c0_set_platdata - set platform data for i2c0 device
- * @i2c: The platform data to set, or NULL for default data.
- *
- * Register the given platform data for use with the i2c0 device. This
- * call copies the platform data, so the caller can use __initdata for
- * their copy.
- *
- * This call will set cfg_gpio if is null to the default platform
- * implementation.
- *
- * Any user of s3c_device_i2c0 should call this, even if it is with
- * NULL to ensure that the device is given the default platform data
- * as the driver will no longer carry defaults.
- */
-extern void s3c_i2c0_set_platdata(struct s3c2410_platform_i2c *i2c);
-extern void s3c_i2c1_set_platdata(struct s3c2410_platform_i2c *i2c);
-extern void s3c_i2c2_set_platdata(struct s3c2410_platform_i2c *i2c);
-extern void s3c_i2c3_set_platdata(struct s3c2410_platform_i2c *i2c);
-extern void s3c_i2c4_set_platdata(struct s3c2410_platform_i2c *i2c);
-extern void s3c_i2c5_set_platdata(struct s3c2410_platform_i2c *i2c);
-extern void s3c_i2c6_set_platdata(struct s3c2410_platform_i2c *i2c);
-extern void s3c_i2c7_set_platdata(struct s3c2410_platform_i2c *i2c);
-extern void s5p_i2c_hdmiphy_set_platdata(struct s3c2410_platform_i2c *i2c);
-
-/* defined by architecture to configure gpio */
-extern void s3c_i2c0_cfg_gpio(struct platform_device *dev);
-extern void s3c_i2c1_cfg_gpio(struct platform_device *dev);
-extern void s3c_i2c2_cfg_gpio(struct platform_device *dev);
-extern void s3c_i2c3_cfg_gpio(struct platform_device *dev);
-extern void s3c_i2c4_cfg_gpio(struct platform_device *dev);
-extern void s3c_i2c5_cfg_gpio(struct platform_device *dev);
-extern void s3c_i2c6_cfg_gpio(struct platform_device *dev);
-extern void s3c_i2c7_cfg_gpio(struct platform_device *dev);
-
-extern struct s3c2410_platform_i2c default_i2c_data;
-
-#endif /* __ASM_ARCH_IIC_H */
diff --git a/arch/arm/plat-samsung/include/plat/mci.h b/arch/arm/plat-samsung/include/plat/mci.h
deleted file mode 100644
index c42d317..0000000
--- a/arch/arm/plat-samsung/include/plat/mci.h
+++ /dev/null
@@ -1,52 +0,0 @@
-#ifndef _ARCH_MCI_H
-#define _ARCH_MCI_H
-
-/**
- * struct s3c24xx_mci_pdata - sd/mmc controller platform data
- * @no_wprotect: Set this to indicate there is no write-protect switch.
- * @no_detect: Set this if there is no detect switch.
- * @wprotect_invert: Invert the default sense of the write protect switch.
- * @detect_invert: Invert the default sense of the write protect switch.
- * @use_dma: Set to allow the use of DMA.
- * @gpio_detect: GPIO number for the card detect line.
- * @gpio_wprotect: GPIO number for the write protect line.
- * @ocr_avail: The mask of the available power states, non-zero to use.
- * @set_power: Callback to control the power mode.
- *
- * The @gpio_detect is used for card detection when @no_wprotect is unset,
- * and the default sense is that 0 returned from gpio_get_value() means
- * that a card is inserted. If @detect_invert is set, then the value from
- * gpio_get_value() is inverted, which makes 1 mean card inserted.
- *
- * The driver will use @gpio_wprotect to signal whether the card is write
- * protected if @no_wprotect is not set. A 0 returned from gpio_get_value()
- * means the card is read/write, and 1 means read-only. The @wprotect_invert
- * will invert the value returned from gpio_get_value().
- *
- * Card power is set by @ocr_availa, using MCC_VDD_ constants if it is set
- * to a non-zero value, otherwise the default of 3.2-3.4V is used.
- */
-struct s3c24xx_mci_pdata {
-	unsigned int	no_wprotect:1;
-	unsigned int	no_detect:1;
-	unsigned int	wprotect_invert:1;
-	unsigned int	detect_invert:1;	/* set => detect active high */
-	unsigned int	use_dma:1;
-
-	unsigned int	gpio_detect;
-	unsigned int	gpio_wprotect;
-	unsigned long	ocr_avail;
-	void		(*set_power)(unsigned char power_mode,
-				     unsigned short vdd);
-};
-
-/**
- * s3c24xx_mci_set_platdata - set platform data for mmc/sdi device
- * @pdata: The platform data
- *
- * Copy the platform data supplied by @pdata so that this can be marked
- * __initdata.
- */
-extern void s3c24xx_mci_set_platdata(struct s3c24xx_mci_pdata *pdata);
-
-#endif /* _ARCH_NCI_H */
diff --git a/arch/arm/plat-samsung/include/plat/mipi_csis.h b/arch/arm/plat-samsung/include/plat/mipi_csis.h
deleted file mode 100644
index c45b1e8..0000000
--- a/arch/arm/plat-samsung/include/plat/mipi_csis.h
+++ /dev/null
@@ -1,43 +0,0 @@
-/*
- * Copyright (C) 2010-2011 Samsung Electronics Co., Ltd.
- *
- * S5P series MIPI CSI slave device support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __PLAT_SAMSUNG_MIPI_CSIS_H_
-#define __PLAT_SAMSUNG_MIPI_CSIS_H_ __FILE__
-
-struct platform_device;
-
-/**
- * struct s5p_platform_mipi_csis - platform data for S5P MIPI-CSIS driver
- * @clk_rate: bus clock frequency
- * @lanes: number of data lanes used
- * @alignment: data alignment in bits
- * @hs_settle: HS-RX settle time
- * @fixed_phy_vdd: false to enable external D-PHY regulator management in the
- *		   driver or true in case this regulator has no enable function
- * @phy_enable: pointer to a callback controlling D-PHY enable/reset
- */
-struct s5p_platform_mipi_csis {
-	unsigned long clk_rate;
-	u8 lanes;
-	u8 alignment;
-	u8 hs_settle;
-	bool fixed_phy_vdd;
-	int (*phy_enable)(struct platform_device *pdev, bool on);
-};
-
-/**
- * s5p_csis_phy_enable - global MIPI-CSI receiver D-PHY control
- * @pdev: MIPI-CSIS platform device
- * @on: true to enable D-PHY and deassert its reset
- *	false to disable D-PHY
- */
-int s5p_csis_phy_enable(struct platform_device *pdev, bool on);
-
-#endif /* __PLAT_SAMSUNG_MIPI_CSIS_H_ */
diff --git a/arch/arm/plat-samsung/include/plat/nand.h b/arch/arm/plat-samsung/include/plat/nand.h
deleted file mode 100644
index b64115f..0000000
--- a/arch/arm/plat-samsung/include/plat/nand.h
+++ /dev/null
@@ -1,67 +0,0 @@
-/* arch/arm/mach-s3c2410/include/mach/nand.h
- *
- * Copyright (c) 2004 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C2410 - NAND device controller platform_device info
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-/**
- * struct s3c2410_nand_set - define a set of one or more nand chips
- * @disable_ecc:	Entirely disable ECC - Dangerous
- * @flash_bbt: 		Openmoko u-boot can create a Bad Block Table
- *			Setting this flag will allow the kernel to
- *			look for it at boot time and also skip the NAND
- *			scan.
- * @options:		Default value to set into 'struct nand_chip' options.
- * @nr_chips:		Number of chips in this set
- * @nr_partitions:	Number of partitions pointed to by @partitions
- * @name:		Name of set (optional)
- * @nr_map:		Map for low-layer logical to physical chip numbers (option)
- * @partitions:		The mtd partition list
- *
- * define a set of one or more nand chips registered with an unique mtd. Also
- * allows to pass flag to the underlying NAND layer. 'disable_ecc' will trigger
- * a warning at boot time.
- */
-struct s3c2410_nand_set {
-	unsigned int		disable_ecc:1;
-	unsigned int		flash_bbt:1;
-
-	unsigned int		options;
-	int			nr_chips;
-	int			nr_partitions;
-	char			*name;
-	int			*nr_map;
-	struct mtd_partition	*partitions;
-	struct nand_ecclayout	*ecc_layout;
-};
-
-struct s3c2410_platform_nand {
-	/* timing information for controller, all times in nanoseconds */
-
-	int	tacls;	/* time for active CLE/ALE to nWE/nOE */
-	int	twrph0;	/* active time for nWE/nOE */
-	int	twrph1;	/* time for release CLE/ALE from nWE/nOE inactive */
-
-	unsigned int	ignore_unset_ecc:1;
-
-	int			nr_sets;
-	struct s3c2410_nand_set *sets;
-
-	void			(*select_chip)(struct s3c2410_nand_set *,
-					       int chip);
-};
-
-/**
- * s3c_nand_set_platdata() - register NAND platform data.
- * @nand: The NAND platform data to register with s3c_device_nand.
- *
- * This function copies the given NAND platform data, @nand and registers
- * it with the s3c_device_nand. This allows @nand to be __initdata.
-*/
-extern void s3c_nand_set_platdata(struct s3c2410_platform_nand *nand);
diff --git a/arch/arm/plat-samsung/include/plat/s3c64xx-spi.h b/arch/arm/plat-samsung/include/plat/s3c64xx-spi.h
deleted file mode 100644
index ceba18d..0000000
--- a/arch/arm/plat-samsung/include/plat/s3c64xx-spi.h
+++ /dev/null
@@ -1,68 +0,0 @@
-/* linux/arch/arm/plat-samsung/include/plat/s3c64xx-spi.h
- *
- * Copyright (C) 2009 Samsung Electronics Ltd.
- *	Jaswinder Singh <jassi.brar@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __S3C64XX_PLAT_SPI_H
-#define __S3C64XX_PLAT_SPI_H
-
-struct platform_device;
-
-/**
- * struct s3c64xx_spi_csinfo - ChipSelect description
- * @fb_delay: Slave specific feedback delay.
- *            Refer to FB_CLK_SEL register definition in SPI chapter.
- * @line: Custom 'identity' of the CS line.
- *
- * This is per SPI-Slave Chipselect information.
- * Allocate and initialize one in machine init code and make the
- * spi_board_info.controller_data point to it.
- */
-struct s3c64xx_spi_csinfo {
-	u8 fb_delay;
-	unsigned line;
-};
-
-/**
- * struct s3c64xx_spi_info - SPI Controller defining structure
- * @src_clk_nr: Clock source index for the CLK_CFG[SPI_CLKSEL] field.
- * @num_cs: Number of CS this controller emulates.
- * @cfg_gpio: Configure pins for this SPI controller.
- */
-struct s3c64xx_spi_info {
-	int src_clk_nr;
-	int num_cs;
-	int (*cfg_gpio)(void);
-};
-
-/**
- * s3c64xx_spi_set_platdata - SPI Controller configure callback by the board
- *				initialization code.
- * @cfg_gpio: Pointer to gpio setup function.
- * @src_clk_nr: Clock the SPI controller is to use to generate SPI clocks.
- * @num_cs: Number of elements in the 'cs' array.
- *
- * Call this from machine init code for each SPI Controller that
- * has some chips attached to it.
- */
-extern void s3c64xx_spi0_set_platdata(int (*cfg_gpio)(void), int src_clk_nr,
-						int num_cs);
-extern void s3c64xx_spi1_set_platdata(int (*cfg_gpio)(void), int src_clk_nr,
-						int num_cs);
-extern void s3c64xx_spi2_set_platdata(int (*cfg_gpio)(void), int src_clk_nr,
-						int num_cs);
-
-/* defined by architecture to configure gpio */
-extern int s3c64xx_spi0_cfg_gpio(void);
-extern int s3c64xx_spi1_cfg_gpio(void);
-extern int s3c64xx_spi2_cfg_gpio(void);
-
-extern struct s3c64xx_spi_info s3c64xx_spi0_pdata;
-extern struct s3c64xx_spi_info s3c64xx_spi1_pdata;
-extern struct s3c64xx_spi_info s3c64xx_spi2_pdata;
-#endif /* __S3C64XX_PLAT_SPI_H */
diff --git a/arch/arm/plat-samsung/include/plat/ts.h b/arch/arm/plat-samsung/include/plat/ts.h
deleted file mode 100644
index 26fdb22..0000000
--- a/arch/arm/plat-samsung/include/plat/ts.h
+++ /dev/null
@@ -1,25 +0,0 @@
-/* arch/arm/plat-samsung/include/plat/ts.h
- *
- * Copyright (c) 2005 Arnaud Patard <arnaud.patard@rtp-net.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARM_TS_H
-#define __ASM_ARM_TS_H
-
-struct s3c2410_ts_mach_info {
-       int             delay;
-       int             presc;
-       int             oversampling_shift;
-	void    (*cfg_gpio)(struct platform_device *dev);
-};
-
-extern void s3c24xx_ts_set_platdata(struct s3c2410_ts_mach_info *);
-
-/* defined by architecture to configure gpio */
-extern void s3c24xx_ts_cfg_gpio(struct platform_device *dev);
-
-#endif /* __ASM_ARM_TS_H */
diff --git a/arch/arm/plat-samsung/include/plat/udc.h b/arch/arm/plat-samsung/include/plat/udc.h
deleted file mode 100644
index de8e228..0000000
--- a/arch/arm/plat-samsung/include/plat/udc.h
+++ /dev/null
@@ -1,44 +0,0 @@
-/* arch/arm/plat-samsung/include/plat/udc.h
- *
- * Copyright (c) 2005 Arnaud Patard <arnaud.patard@rtp-net.org>
- *
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- *
- *  Changelog:
- *	14-Mar-2005	RTP	Created file
- *	02-Aug-2005	RTP	File rename
- *	07-Sep-2005	BJD	Minor cleanups, changed cmd to enum
- *	18-Jan-2007	HMW	Add per-platform vbus_draw function
-*/
-
-#ifndef __ASM_ARM_ARCH_UDC_H
-#define __ASM_ARM_ARCH_UDC_H
-
-enum s3c2410_udc_cmd_e {
-	S3C2410_UDC_P_ENABLE	= 1,	/* Pull-up enable        */
-	S3C2410_UDC_P_DISABLE	= 2,	/* Pull-up disable       */
-	S3C2410_UDC_P_RESET	= 3,	/* UDC reset, in case of */
-};
-
-struct s3c2410_udc_mach_info {
-	void	(*udc_command)(enum s3c2410_udc_cmd_e);
-	void	(*vbus_draw)(unsigned int ma);
-
-	unsigned int pullup_pin;
-	unsigned int pullup_pin_inverted;
-
-	unsigned int vbus_pin;
-	unsigned char vbus_pin_inverted;
-};
-
-extern void __init s3c24xx_udc_set_platdata(struct s3c2410_udc_mach_info *);
-
-struct s3c24xx_hsudc_platdata;
-
-extern void __init s3c24xx_hsudc_set_platdata(struct s3c24xx_hsudc_platdata *pd);
-
-#endif /* __ASM_ARM_ARCH_UDC_H */
diff --git a/arch/arm/plat-samsung/include/plat/usb-control.h b/arch/arm/plat-samsung/include/plat/usb-control.h
deleted file mode 100644
index 7fa1fbe..0000000
--- a/arch/arm/plat-samsung/include/plat/usb-control.h
+++ /dev/null
@@ -1,43 +0,0 @@
-/* arch/arm/plat-samsung/include/plat/usb-control.h
- *
- * Copyright (c) 2004 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C - USB host port information
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_USBCONTROL_H
-#define __ASM_ARCH_USBCONTROL_H
-
-#define S3C_HCDFLG_USED	(1)
-
-struct s3c2410_hcd_port {
-	unsigned char	flags;
-	unsigned char	power;
-	unsigned char	oc_status;
-	unsigned char	oc_changed;
-};
-
-struct s3c2410_hcd_info {
-	struct usb_hcd		*hcd;
-	struct s3c2410_hcd_port	port[2];
-
-	void		(*power_control)(int port, int to);
-	void		(*enable_oc)(struct s3c2410_hcd_info *, int on);
-	void		(*report_oc)(struct s3c2410_hcd_info *, int ports);
-};
-
-static void inline s3c2410_usb_report_oc(struct s3c2410_hcd_info *info, int ports)
-{
-	if (info->report_oc != NULL) {
-		(info->report_oc)(info, ports);
-	}
-}
-
-extern void s3c_ohci_set_platdata(struct s3c2410_hcd_info *info);
-
-#endif /*__ASM_ARCH_USBCONTROL_H */
diff --git a/drivers/ata/pata_samsung_cf.c b/drivers/ata/pata_samsung_cf.c
index 1b372c2..63ffb00 100644
--- a/drivers/ata/pata_samsung_cf.c
+++ b/drivers/ata/pata_samsung_cf.c
@@ -23,7 +23,7 @@
 #include <linux/platform_device.h>
 #include <linux/slab.h>
 
-#include <plat/ata.h>
+#include <linux/platform_data/ata-samsung_cf.h>
 #include <plat/regs-ata.h>
 
 #define DRV_NAME "pata_samsung_cf"
diff --git a/drivers/hwmon/s3c-hwmon.c b/drivers/hwmon/s3c-hwmon.c
index b7975f8..fe11b95 100644
--- a/drivers/hwmon/s3c-hwmon.c
+++ b/drivers/hwmon/s3c-hwmon.c
@@ -34,7 +34,7 @@
 #include <linux/hwmon-sysfs.h>
 
 #include <plat/adc.h>
-#include <plat/hwmon.h>
+#include <linux/platform_data/hwmon-s3c.h>
 
 struct s3c_hwmon_attr {
 	struct sensor_device_attribute	in;
diff --git a/drivers/i2c/busses/i2c-s3c2410.c b/drivers/i2c/busses/i2c-s3c2410.c
index 5ae3b02..4d07dea 100644
--- a/drivers/i2c/busses/i2c-s3c2410.c
+++ b/drivers/i2c/busses/i2c-s3c2410.c
@@ -42,7 +42,7 @@
 #include <asm/irq.h>
 
 #include <plat/regs-iic.h>
-#include <plat/iic.h>
+#include <linux/platform_data/i2c-s3c2410.h>
 
 /* Treat S3C2410 as baseline hardware, anything else is supported via quirks */
 #define QUIRK_S3C2440		(1 << 0)
diff --git a/drivers/input/touchscreen/s3c2410_ts.c b/drivers/input/touchscreen/s3c2410_ts.c
index bf1a064..df9e816 100644
--- a/drivers/input/touchscreen/s3c2410_ts.c
+++ b/drivers/input/touchscreen/s3c2410_ts.c
@@ -37,7 +37,7 @@
 
 #include <plat/adc.h>
 #include <plat/regs-adc.h>
-#include <plat/ts.h>
+#include <linux/platform_data/touchscreen-s3c2410.h>
 
 #define TSC_SLEEP  (S3C2410_ADCTSC_PULL_UP_DISABLE | S3C2410_ADCTSC_XY_PST(0))
 
diff --git a/drivers/leds/leds-s3c24xx.c b/drivers/leds/leds-s3c24xx.c
index 942f0ea..e1a0df6 100644
--- a/drivers/leds/leds-s3c24xx.c
+++ b/drivers/leds/leds-s3c24xx.c
@@ -21,7 +21,7 @@
 
 #include <mach/hardware.h>
 #include <mach/regs-gpio.h>
-#include <mach/leds-gpio.h>
+#include <linux/platform_data/leds-s3c24xx.h>
 
 /* our context */
 
diff --git a/drivers/media/video/s5p-fimc/mipi-csis.c b/drivers/media/video/s5p-fimc/mipi-csis.c
index 2f73d9e..5e89843 100644
--- a/drivers/media/video/s5p-fimc/mipi-csis.c
+++ b/drivers/media/video/s5p-fimc/mipi-csis.c
@@ -26,7 +26,7 @@
 #include <linux/spinlock.h>
 #include <linux/videodev2.h>
 #include <media/v4l2-subdev.h>
-#include <plat/mipi_csis.h>
+#include <linux/platform_data/mipi-csis.h>
 #include "mipi-csis.h"
 
 static int debug;
diff --git a/drivers/mmc/host/s3cmci.c b/drivers/mmc/host/s3cmci.c
index bd5a5cc..4638dda 100644
--- a/drivers/mmc/host/s3cmci.c
+++ b/drivers/mmc/host/s3cmci.c
@@ -27,7 +27,7 @@
 
 #include <mach/regs-sdi.h>
 
-#include <plat/mci.h>
+#include <linux/platform_data/mmc-s3cmci.h>
 
 #include "s3cmci.h"
 
diff --git a/drivers/mtd/nand/s3c2410.c b/drivers/mtd/nand/s3c2410.c
index 91121f3..d804061 100644
--- a/drivers/mtd/nand/s3c2410.c
+++ b/drivers/mtd/nand/s3c2410.c
@@ -46,7 +46,7 @@
 #include <asm/io.h>
 
 #include <plat/regs-nand.h>
-#include <plat/nand.h>
+#include <linux/platform_data/mtd-nand-s3c2410.h>
 
 #ifdef CONFIG_MTD_NAND_S3C2410_HWECC
 static int hardware_ecc = 1;
diff --git a/drivers/spi/spi-s3c64xx.c b/drivers/spi/spi-s3c64xx.c
index d1c8441f..0e2a022 100644
--- a/drivers/spi/spi-s3c64xx.c
+++ b/drivers/spi/spi-s3c64xx.c
@@ -32,7 +32,7 @@
 #include <linux/of_gpio.h>
 
 #include <mach/dma.h>
-#include <plat/s3c64xx-spi.h>
+#include <linux/platform_data/spi-s3c64xx.h>
 
 #define MAX_SPI_PORTS		3
 
diff --git a/drivers/usb/gadget/s3c2410_udc.c b/drivers/usb/gadget/s3c2410_udc.c
index f2e51f5..f006045 100644
--- a/drivers/usb/gadget/s3c2410_udc.c
+++ b/drivers/usb/gadget/s3c2410_udc.c
@@ -43,7 +43,7 @@
 #include <mach/hardware.h>
 
 #include <plat/regs-udc.h>
-#include <plat/udc.h>
+#include <linux/platform_data/usb-s3c2410_udc.h>
 
 
 #include "s3c2410_udc.h"
diff --git a/drivers/usb/host/ehci-s5p.c b/drivers/usb/host/ehci-s5p.c
index 9d8f1dd..dfb14c7 100644
--- a/drivers/usb/host/ehci-s5p.c
+++ b/drivers/usb/host/ehci-s5p.c
@@ -16,7 +16,7 @@
 #include <linux/of.h>
 #include <linux/platform_device.h>
 #include <linux/of_gpio.h>
-#include <plat/ehci.h>
+#include <linux/platform_data/usb-ehci-s5p.h>
 #include <plat/usb-phy.h>
 
 #define EHCI_INSNREG00(base)			(base + 0x90)
diff --git a/drivers/usb/host/ohci-exynos.c b/drivers/usb/host/ohci-exynos.c
index fc3091b..20a5008 100644
--- a/drivers/usb/host/ohci-exynos.c
+++ b/drivers/usb/host/ohci-exynos.c
@@ -14,7 +14,7 @@
 #include <linux/clk.h>
 #include <linux/of.h>
 #include <linux/platform_device.h>
-#include <mach/ohci.h>
+#include <linux/platform_data/usb-exynos.h>
 #include <plat/usb-phy.h>
 
 struct exynos_ohci_hcd {
diff --git a/drivers/usb/host/ohci-s3c2410.c b/drivers/usb/host/ohci-s3c2410.c
index 664c869..0d2309c 100644
--- a/drivers/usb/host/ohci-s3c2410.c
+++ b/drivers/usb/host/ohci-s3c2410.c
@@ -21,7 +21,7 @@
 
 #include <linux/platform_device.h>
 #include <linux/clk.h>
-#include <plat/usb-control.h>
+#include <linux/platform_data/usb-ohci-s3c2410.h>
 
 #define valid_port(idx) ((idx) == 1 || (idx) == 2)
 
diff --git a/include/linux/platform_data/asoc-s3c.h b/include/linux/platform_data/asoc-s3c.h
new file mode 100644
index 0000000..aa9875f
--- /dev/null
+++ b/include/linux/platform_data/asoc-s3c.h
@@ -0,0 +1,59 @@
+/* arch/arm/plat-samsung/include/plat/audio.h
+ *
+ * Copyright (c) 2009 Samsung Electronics Co. Ltd
+ * Author: Jaswinder Singh <jassi.brar@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/* The machine init code calls s3c*_ac97_setup_gpio with
+ * one of these defines in order to select appropriate bank
+ * of GPIO for AC97 pins
+ */
+#define S3C64XX_AC97_GPD  0
+#define S3C64XX_AC97_GPE  1
+extern void s3c64xx_ac97_setup_gpio(int);
+
+/*
+ * The machine init code calls s5p*_spdif_setup_gpio with
+ * one of these defines in order to select appropriate bank
+ * of GPIO for S/PDIF pins
+ */
+#define S5PC100_SPDIF_GPD  0
+#define S5PC100_SPDIF_GPG3 1
+extern void s5pc100_spdif_setup_gpio(int);
+
+struct samsung_i2s {
+/* If the Primary DAI has 5.1 Channels */
+#define QUIRK_PRI_6CHAN		(1 << 0)
+/* If the I2S block has a Stereo Overlay Channel */
+#define QUIRK_SEC_DAI		(1 << 1)
+/*
+ * If the I2S block has no internal prescalar or MUX (I2SMOD[10] bit)
+ * The Machine driver must provide suitably set clock to the I2S block.
+ */
+#define QUIRK_NO_MUXPSR		(1 << 2)
+#define QUIRK_NEED_RSTCLR	(1 << 3)
+	/* Quirks of the I2S controller */
+	u32 quirks;
+
+	/*
+	 * Array of clock names that can be used to generate I2S signals.
+	 * Also corresponds to clocks of I2SMOD[10]
+	 */
+	const char **src_clk;
+	dma_addr_t idma_addr;
+};
+
+/**
+ * struct s3c_audio_pdata - common platform data for audio device drivers
+ * @cfg_gpio: Callback function to setup mux'ed pins in I2S/PCM/AC97 mode
+ */
+struct s3c_audio_pdata {
+	int (*cfg_gpio)(struct platform_device *);
+	union {
+		struct samsung_i2s i2s;
+	} type;
+};
diff --git a/include/linux/platform_data/asoc-s3c24xx_simtec.h b/include/linux/platform_data/asoc-s3c24xx_simtec.h
new file mode 100644
index 0000000..376af52
--- /dev/null
+++ b/include/linux/platform_data/asoc-s3c24xx_simtec.h
@@ -0,0 +1,34 @@
+/* arch/arm/plat-samsung/include/plat/audio-simtec.h
+ *
+ * Copyright 2008 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Simtec Audio support.
+*/
+
+/**
+ * struct s3c24xx_audio_simtec_pdata - platform data for simtec audio
+ * @use_mpllin: Select codec clock from MPLLin
+ * @output_cdclk: Need to output CDCLK to the codec
+ * @have_mic: Set if we have a MIC socket
+ * @have_lout: Set if we have a LineOut socket
+ * @amp_gpio: GPIO pin to enable the AMP
+ * @amp_gain: Option GPIO to control AMP gain
+ */
+struct s3c24xx_audio_simtec_pdata {
+	unsigned int	use_mpllin:1;
+	unsigned int	output_cdclk:1;
+
+	unsigned int	have_mic:1;
+	unsigned int	have_lout:1;
+
+	int		amp_gpio;
+	int		amp_gain[2];
+
+	void	(*startup)(void);
+};
diff --git a/include/linux/platform_data/ata-samsung_cf.h b/include/linux/platform_data/ata-samsung_cf.h
new file mode 100644
index 0000000..2a3855a
--- /dev/null
+++ b/include/linux/platform_data/ata-samsung_cf.h
@@ -0,0 +1,36 @@
+/* linux/arch/arm/plat-samsung/include/plat/ata.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Samsung CF-ATA platform_device info
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_PLAT_ATA_H
+#define __ASM_PLAT_ATA_H __FILE__
+
+/**
+ * struct s3c_ide_platdata - S3C IDE driver platform data.
+ * @setup_gpio: Setup the external GPIO pins to the right state for data
+ * transfer in true-ide mode.
+ */
+struct s3c_ide_platdata {
+	void (*setup_gpio)(void);
+};
+
+/*
+ * s3c_ide_set_platdata() - Setup the platform specifc data for IDE driver.
+ * @pdata: Platform data for IDE driver.
+ */
+extern void s3c_ide_set_platdata(struct s3c_ide_platdata *pdata);
+
+/* architecture-specific IDE configuration */
+extern void s3c64xx_ide_setup_gpio(void);
+extern void s5pc100_ide_setup_gpio(void);
+extern void s5pv210_ide_setup_gpio(void);
+
+#endif /*__ASM_PLAT_ATA_H */
diff --git a/include/linux/platform_data/hwmon-s3c.h b/include/linux/platform_data/hwmon-s3c.h
new file mode 100644
index 0000000..c167e44
--- /dev/null
+++ b/include/linux/platform_data/hwmon-s3c.h
@@ -0,0 +1,51 @@
+/* linux/arch/arm/plat-s3c/include/plat/hwmon.h
+ *
+ * Copyright 2005 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	http://armlinux.simtec.co.uk/
+ *
+ * S3C - HWMon interface for ADC
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_ADC_HWMON_H
+#define __ASM_ARCH_ADC_HWMON_H __FILE__
+
+/**
+ * s3c_hwmon_chcfg - channel configuration
+ * @name: The name to give this channel.
+ * @mult: Multiply the ADC value read by this.
+ * @div: Divide the value from the ADC by this.
+ *
+ * The value read from the ADC is converted to a value that
+ * hwmon expects (mV) by result = (value_read * @mult) / @div.
+ */
+struct s3c_hwmon_chcfg {
+	const char	*name;
+	unsigned int	mult;
+	unsigned int	div;
+};
+
+/**
+ * s3c_hwmon_pdata - HWMON platform data
+ * @in: One configuration for each possible channel used.
+ */
+struct s3c_hwmon_pdata {
+	struct s3c_hwmon_chcfg	*in[8];
+};
+
+/**
+ * s3c_hwmon_set_platdata - Set platform data for S3C HWMON device
+ * @pd: Platform data to register to device.
+ *
+ * Register the given platform data for use with the S3C HWMON device.
+ * The call will copy the platform data, so the board definitions can
+ * make the structure itself __initdata.
+ */
+extern void __init s3c_hwmon_set_platdata(struct s3c_hwmon_pdata *pd);
+
+#endif /* __ASM_ARCH_ADC_HWMON_H */
+
diff --git a/include/linux/platform_data/i2c-s3c2410.h b/include/linux/platform_data/i2c-s3c2410.h
new file mode 100644
index 0000000..51d52e7
--- /dev/null
+++ b/include/linux/platform_data/i2c-s3c2410.h
@@ -0,0 +1,77 @@
+/* arch/arm/plat-s3c/include/plat/iic.h
+ *
+ * Copyright 2004-2009 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C - I2C Controller platform_device info
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_IIC_H
+#define __ASM_ARCH_IIC_H __FILE__
+
+#define S3C_IICFLG_FILTER	(1<<0)	/* enable s3c2440 filter */
+
+/**
+ *	struct s3c2410_platform_i2c - Platform data for s3c I2C.
+ *	@bus_num: The bus number to use (if possible).
+ *	@flags: Any flags for the I2C bus (E.g. S3C_IICFLK_FILTER).
+ *	@slave_addr: The I2C address for the slave device (if enabled).
+ *	@frequency: The desired frequency in Hz of the bus.  This is
+ *                  guaranteed to not be exceeded.  If the caller does
+ *                  not care, use zero and the driver will select a
+ *                  useful default.
+ *	@sda_delay: The delay (in ns) applied to SDA edges.
+ *	@cfg_gpio: A callback to configure the pins for I2C operation.
+ */
+struct s3c2410_platform_i2c {
+	int		bus_num;
+	unsigned int	flags;
+	unsigned int	slave_addr;
+	unsigned long	frequency;
+	unsigned int	sda_delay;
+
+	void	(*cfg_gpio)(struct platform_device *dev);
+};
+
+/**
+ * s3c_i2c0_set_platdata - set platform data for i2c0 device
+ * @i2c: The platform data to set, or NULL for default data.
+ *
+ * Register the given platform data for use with the i2c0 device. This
+ * call copies the platform data, so the caller can use __initdata for
+ * their copy.
+ *
+ * This call will set cfg_gpio if is null to the default platform
+ * implementation.
+ *
+ * Any user of s3c_device_i2c0 should call this, even if it is with
+ * NULL to ensure that the device is given the default platform data
+ * as the driver will no longer carry defaults.
+ */
+extern void s3c_i2c0_set_platdata(struct s3c2410_platform_i2c *i2c);
+extern void s3c_i2c1_set_platdata(struct s3c2410_platform_i2c *i2c);
+extern void s3c_i2c2_set_platdata(struct s3c2410_platform_i2c *i2c);
+extern void s3c_i2c3_set_platdata(struct s3c2410_platform_i2c *i2c);
+extern void s3c_i2c4_set_platdata(struct s3c2410_platform_i2c *i2c);
+extern void s3c_i2c5_set_platdata(struct s3c2410_platform_i2c *i2c);
+extern void s3c_i2c6_set_platdata(struct s3c2410_platform_i2c *i2c);
+extern void s3c_i2c7_set_platdata(struct s3c2410_platform_i2c *i2c);
+extern void s5p_i2c_hdmiphy_set_platdata(struct s3c2410_platform_i2c *i2c);
+
+/* defined by architecture to configure gpio */
+extern void s3c_i2c0_cfg_gpio(struct platform_device *dev);
+extern void s3c_i2c1_cfg_gpio(struct platform_device *dev);
+extern void s3c_i2c2_cfg_gpio(struct platform_device *dev);
+extern void s3c_i2c3_cfg_gpio(struct platform_device *dev);
+extern void s3c_i2c4_cfg_gpio(struct platform_device *dev);
+extern void s3c_i2c5_cfg_gpio(struct platform_device *dev);
+extern void s3c_i2c6_cfg_gpio(struct platform_device *dev);
+extern void s3c_i2c7_cfg_gpio(struct platform_device *dev);
+
+extern struct s3c2410_platform_i2c default_i2c_data;
+
+#endif /* __ASM_ARCH_IIC_H */
diff --git a/include/linux/platform_data/leds-s3c24xx.h b/include/linux/platform_data/leds-s3c24xx.h
new file mode 100644
index 0000000..d8a7672
--- /dev/null
+++ b/include/linux/platform_data/leds-s3c24xx.h
@@ -0,0 +1,28 @@
+/* arch/arm/mach-s3c2410/include/mach/leds-gpio.h
+ *
+ * Copyright (c) 2006 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C24XX - LEDs GPIO connector
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_LEDSGPIO_H
+#define __ASM_ARCH_LEDSGPIO_H "leds-gpio.h"
+
+#define S3C24XX_LEDF_ACTLOW	(1<<0)		/* LED is on when GPIO low */
+#define S3C24XX_LEDF_TRISTATE	(1<<1)		/* tristate to turn off */
+
+struct s3c24xx_led_platdata {
+	unsigned int		 gpio;
+	unsigned int		 flags;
+
+	char			*name;
+	char			*def_trigger;
+};
+
+#endif /* __ASM_ARCH_LEDSGPIO_H */
diff --git a/include/linux/platform_data/mipi-csis.h b/include/linux/platform_data/mipi-csis.h
new file mode 100644
index 0000000..c45b1e8
--- /dev/null
+++ b/include/linux/platform_data/mipi-csis.h
@@ -0,0 +1,43 @@
+/*
+ * Copyright (C) 2010-2011 Samsung Electronics Co., Ltd.
+ *
+ * S5P series MIPI CSI slave device support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __PLAT_SAMSUNG_MIPI_CSIS_H_
+#define __PLAT_SAMSUNG_MIPI_CSIS_H_ __FILE__
+
+struct platform_device;
+
+/**
+ * struct s5p_platform_mipi_csis - platform data for S5P MIPI-CSIS driver
+ * @clk_rate: bus clock frequency
+ * @lanes: number of data lanes used
+ * @alignment: data alignment in bits
+ * @hs_settle: HS-RX settle time
+ * @fixed_phy_vdd: false to enable external D-PHY regulator management in the
+ *		   driver or true in case this regulator has no enable function
+ * @phy_enable: pointer to a callback controlling D-PHY enable/reset
+ */
+struct s5p_platform_mipi_csis {
+	unsigned long clk_rate;
+	u8 lanes;
+	u8 alignment;
+	u8 hs_settle;
+	bool fixed_phy_vdd;
+	int (*phy_enable)(struct platform_device *pdev, bool on);
+};
+
+/**
+ * s5p_csis_phy_enable - global MIPI-CSI receiver D-PHY control
+ * @pdev: MIPI-CSIS platform device
+ * @on: true to enable D-PHY and deassert its reset
+ *	false to disable D-PHY
+ */
+int s5p_csis_phy_enable(struct platform_device *pdev, bool on);
+
+#endif /* __PLAT_SAMSUNG_MIPI_CSIS_H_ */
diff --git a/include/linux/platform_data/mmc-s3cmci.h b/include/linux/platform_data/mmc-s3cmci.h
new file mode 100644
index 0000000..c42d317
--- /dev/null
+++ b/include/linux/platform_data/mmc-s3cmci.h
@@ -0,0 +1,52 @@
+#ifndef _ARCH_MCI_H
+#define _ARCH_MCI_H
+
+/**
+ * struct s3c24xx_mci_pdata - sd/mmc controller platform data
+ * @no_wprotect: Set this to indicate there is no write-protect switch.
+ * @no_detect: Set this if there is no detect switch.
+ * @wprotect_invert: Invert the default sense of the write protect switch.
+ * @detect_invert: Invert the default sense of the write protect switch.
+ * @use_dma: Set to allow the use of DMA.
+ * @gpio_detect: GPIO number for the card detect line.
+ * @gpio_wprotect: GPIO number for the write protect line.
+ * @ocr_avail: The mask of the available power states, non-zero to use.
+ * @set_power: Callback to control the power mode.
+ *
+ * The @gpio_detect is used for card detection when @no_wprotect is unset,
+ * and the default sense is that 0 returned from gpio_get_value() means
+ * that a card is inserted. If @detect_invert is set, then the value from
+ * gpio_get_value() is inverted, which makes 1 mean card inserted.
+ *
+ * The driver will use @gpio_wprotect to signal whether the card is write
+ * protected if @no_wprotect is not set. A 0 returned from gpio_get_value()
+ * means the card is read/write, and 1 means read-only. The @wprotect_invert
+ * will invert the value returned from gpio_get_value().
+ *
+ * Card power is set by @ocr_availa, using MCC_VDD_ constants if it is set
+ * to a non-zero value, otherwise the default of 3.2-3.4V is used.
+ */
+struct s3c24xx_mci_pdata {
+	unsigned int	no_wprotect:1;
+	unsigned int	no_detect:1;
+	unsigned int	wprotect_invert:1;
+	unsigned int	detect_invert:1;	/* set => detect active high */
+	unsigned int	use_dma:1;
+
+	unsigned int	gpio_detect;
+	unsigned int	gpio_wprotect;
+	unsigned long	ocr_avail;
+	void		(*set_power)(unsigned char power_mode,
+				     unsigned short vdd);
+};
+
+/**
+ * s3c24xx_mci_set_platdata - set platform data for mmc/sdi device
+ * @pdata: The platform data
+ *
+ * Copy the platform data supplied by @pdata so that this can be marked
+ * __initdata.
+ */
+extern void s3c24xx_mci_set_platdata(struct s3c24xx_mci_pdata *pdata);
+
+#endif /* _ARCH_NCI_H */
diff --git a/include/linux/platform_data/mtd-nand-s3c2410.h b/include/linux/platform_data/mtd-nand-s3c2410.h
new file mode 100644
index 0000000..b64115f
--- /dev/null
+++ b/include/linux/platform_data/mtd-nand-s3c2410.h
@@ -0,0 +1,67 @@
+/* arch/arm/mach-s3c2410/include/mach/nand.h
+ *
+ * Copyright (c) 2004 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C2410 - NAND device controller platform_device info
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/**
+ * struct s3c2410_nand_set - define a set of one or more nand chips
+ * @disable_ecc:	Entirely disable ECC - Dangerous
+ * @flash_bbt: 		Openmoko u-boot can create a Bad Block Table
+ *			Setting this flag will allow the kernel to
+ *			look for it at boot time and also skip the NAND
+ *			scan.
+ * @options:		Default value to set into 'struct nand_chip' options.
+ * @nr_chips:		Number of chips in this set
+ * @nr_partitions:	Number of partitions pointed to by @partitions
+ * @name:		Name of set (optional)
+ * @nr_map:		Map for low-layer logical to physical chip numbers (option)
+ * @partitions:		The mtd partition list
+ *
+ * define a set of one or more nand chips registered with an unique mtd. Also
+ * allows to pass flag to the underlying NAND layer. 'disable_ecc' will trigger
+ * a warning at boot time.
+ */
+struct s3c2410_nand_set {
+	unsigned int		disable_ecc:1;
+	unsigned int		flash_bbt:1;
+
+	unsigned int		options;
+	int			nr_chips;
+	int			nr_partitions;
+	char			*name;
+	int			*nr_map;
+	struct mtd_partition	*partitions;
+	struct nand_ecclayout	*ecc_layout;
+};
+
+struct s3c2410_platform_nand {
+	/* timing information for controller, all times in nanoseconds */
+
+	int	tacls;	/* time for active CLE/ALE to nWE/nOE */
+	int	twrph0;	/* active time for nWE/nOE */
+	int	twrph1;	/* time for release CLE/ALE from nWE/nOE inactive */
+
+	unsigned int	ignore_unset_ecc:1;
+
+	int			nr_sets;
+	struct s3c2410_nand_set *sets;
+
+	void			(*select_chip)(struct s3c2410_nand_set *,
+					       int chip);
+};
+
+/**
+ * s3c_nand_set_platdata() - register NAND platform data.
+ * @nand: The NAND platform data to register with s3c_device_nand.
+ *
+ * This function copies the given NAND platform data, @nand and registers
+ * it with the s3c_device_nand. This allows @nand to be __initdata.
+*/
+extern void s3c_nand_set_platdata(struct s3c2410_platform_nand *nand);
diff --git a/include/linux/platform_data/spi-s3c64xx.h b/include/linux/platform_data/spi-s3c64xx.h
new file mode 100644
index 0000000..ceba18d
--- /dev/null
+++ b/include/linux/platform_data/spi-s3c64xx.h
@@ -0,0 +1,68 @@
+/* linux/arch/arm/plat-samsung/include/plat/s3c64xx-spi.h
+ *
+ * Copyright (C) 2009 Samsung Electronics Ltd.
+ *	Jaswinder Singh <jassi.brar@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __S3C64XX_PLAT_SPI_H
+#define __S3C64XX_PLAT_SPI_H
+
+struct platform_device;
+
+/**
+ * struct s3c64xx_spi_csinfo - ChipSelect description
+ * @fb_delay: Slave specific feedback delay.
+ *            Refer to FB_CLK_SEL register definition in SPI chapter.
+ * @line: Custom 'identity' of the CS line.
+ *
+ * This is per SPI-Slave Chipselect information.
+ * Allocate and initialize one in machine init code and make the
+ * spi_board_info.controller_data point to it.
+ */
+struct s3c64xx_spi_csinfo {
+	u8 fb_delay;
+	unsigned line;
+};
+
+/**
+ * struct s3c64xx_spi_info - SPI Controller defining structure
+ * @src_clk_nr: Clock source index for the CLK_CFG[SPI_CLKSEL] field.
+ * @num_cs: Number of CS this controller emulates.
+ * @cfg_gpio: Configure pins for this SPI controller.
+ */
+struct s3c64xx_spi_info {
+	int src_clk_nr;
+	int num_cs;
+	int (*cfg_gpio)(void);
+};
+
+/**
+ * s3c64xx_spi_set_platdata - SPI Controller configure callback by the board
+ *				initialization code.
+ * @cfg_gpio: Pointer to gpio setup function.
+ * @src_clk_nr: Clock the SPI controller is to use to generate SPI clocks.
+ * @num_cs: Number of elements in the 'cs' array.
+ *
+ * Call this from machine init code for each SPI Controller that
+ * has some chips attached to it.
+ */
+extern void s3c64xx_spi0_set_platdata(int (*cfg_gpio)(void), int src_clk_nr,
+						int num_cs);
+extern void s3c64xx_spi1_set_platdata(int (*cfg_gpio)(void), int src_clk_nr,
+						int num_cs);
+extern void s3c64xx_spi2_set_platdata(int (*cfg_gpio)(void), int src_clk_nr,
+						int num_cs);
+
+/* defined by architecture to configure gpio */
+extern int s3c64xx_spi0_cfg_gpio(void);
+extern int s3c64xx_spi1_cfg_gpio(void);
+extern int s3c64xx_spi2_cfg_gpio(void);
+
+extern struct s3c64xx_spi_info s3c64xx_spi0_pdata;
+extern struct s3c64xx_spi_info s3c64xx_spi1_pdata;
+extern struct s3c64xx_spi_info s3c64xx_spi2_pdata;
+#endif /* __S3C64XX_PLAT_SPI_H */
diff --git a/include/linux/platform_data/touchscreen-s3c2410.h b/include/linux/platform_data/touchscreen-s3c2410.h
new file mode 100644
index 0000000..26fdb22
--- /dev/null
+++ b/include/linux/platform_data/touchscreen-s3c2410.h
@@ -0,0 +1,25 @@
+/* arch/arm/plat-samsung/include/plat/ts.h
+ *
+ * Copyright (c) 2005 Arnaud Patard <arnaud.patard@rtp-net.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARM_TS_H
+#define __ASM_ARM_TS_H
+
+struct s3c2410_ts_mach_info {
+       int             delay;
+       int             presc;
+       int             oversampling_shift;
+	void    (*cfg_gpio)(struct platform_device *dev);
+};
+
+extern void s3c24xx_ts_set_platdata(struct s3c2410_ts_mach_info *);
+
+/* defined by architecture to configure gpio */
+extern void s3c24xx_ts_cfg_gpio(struct platform_device *dev);
+
+#endif /* __ASM_ARM_TS_H */
diff --git a/include/linux/platform_data/usb-ehci-s5p.h b/include/linux/platform_data/usb-ehci-s5p.h
new file mode 100644
index 0000000..5f28cae
--- /dev/null
+++ b/include/linux/platform_data/usb-ehci-s5p.h
@@ -0,0 +1,21 @@
+/*
+ * Copyright (C) 2011 Samsung Electronics Co.Ltd
+ * Author: Joonyoung Shim <jy0922.shim@samsung.com>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#ifndef __PLAT_SAMSUNG_EHCI_H
+#define __PLAT_SAMSUNG_EHCI_H __FILE__
+
+struct s5p_ehci_platdata {
+	int (*phy_init)(struct platform_device *pdev, int type);
+	int (*phy_exit)(struct platform_device *pdev, int type);
+};
+
+extern void s5p_ehci_set_platdata(struct s5p_ehci_platdata *pd);
+
+#endif /* __PLAT_SAMSUNG_EHCI_H */
diff --git a/include/linux/platform_data/usb-exynos.h b/include/linux/platform_data/usb-exynos.h
new file mode 100644
index 0000000..c256c59
--- /dev/null
+++ b/include/linux/platform_data/usb-exynos.h
@@ -0,0 +1,21 @@
+/*
+ * Copyright (C) 2011 Samsung Electronics Co.Ltd
+ *		http://www.samsung.com/
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#ifndef __MACH_EXYNOS_OHCI_H
+#define __MACH_EXYNOS_OHCI_H
+
+struct exynos4_ohci_platdata {
+	int (*phy_init)(struct platform_device *pdev, int type);
+	int (*phy_exit)(struct platform_device *pdev, int type);
+};
+
+extern void exynos4_ohci_set_platdata(struct exynos4_ohci_platdata *pd);
+
+#endif /* __MACH_EXYNOS_OHCI_H */
diff --git a/include/linux/platform_data/usb-ohci-s3c2410.h b/include/linux/platform_data/usb-ohci-s3c2410.h
new file mode 100644
index 0000000..7fa1fbe
--- /dev/null
+++ b/include/linux/platform_data/usb-ohci-s3c2410.h
@@ -0,0 +1,43 @@
+/* arch/arm/plat-samsung/include/plat/usb-control.h
+ *
+ * Copyright (c) 2004 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C - USB host port information
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_USBCONTROL_H
+#define __ASM_ARCH_USBCONTROL_H
+
+#define S3C_HCDFLG_USED	(1)
+
+struct s3c2410_hcd_port {
+	unsigned char	flags;
+	unsigned char	power;
+	unsigned char	oc_status;
+	unsigned char	oc_changed;
+};
+
+struct s3c2410_hcd_info {
+	struct usb_hcd		*hcd;
+	struct s3c2410_hcd_port	port[2];
+
+	void		(*power_control)(int port, int to);
+	void		(*enable_oc)(struct s3c2410_hcd_info *, int on);
+	void		(*report_oc)(struct s3c2410_hcd_info *, int ports);
+};
+
+static void inline s3c2410_usb_report_oc(struct s3c2410_hcd_info *info, int ports)
+{
+	if (info->report_oc != NULL) {
+		(info->report_oc)(info, ports);
+	}
+}
+
+extern void s3c_ohci_set_platdata(struct s3c2410_hcd_info *info);
+
+#endif /*__ASM_ARCH_USBCONTROL_H */
diff --git a/include/linux/platform_data/usb-s3c2410_udc.h b/include/linux/platform_data/usb-s3c2410_udc.h
new file mode 100644
index 0000000..de8e228
--- /dev/null
+++ b/include/linux/platform_data/usb-s3c2410_udc.h
@@ -0,0 +1,44 @@
+/* arch/arm/plat-samsung/include/plat/udc.h
+ *
+ * Copyright (c) 2005 Arnaud Patard <arnaud.patard@rtp-net.org>
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ *
+ *  Changelog:
+ *	14-Mar-2005	RTP	Created file
+ *	02-Aug-2005	RTP	File rename
+ *	07-Sep-2005	BJD	Minor cleanups, changed cmd to enum
+ *	18-Jan-2007	HMW	Add per-platform vbus_draw function
+*/
+
+#ifndef __ASM_ARM_ARCH_UDC_H
+#define __ASM_ARM_ARCH_UDC_H
+
+enum s3c2410_udc_cmd_e {
+	S3C2410_UDC_P_ENABLE	= 1,	/* Pull-up enable        */
+	S3C2410_UDC_P_DISABLE	= 2,	/* Pull-up disable       */
+	S3C2410_UDC_P_RESET	= 3,	/* UDC reset, in case of */
+};
+
+struct s3c2410_udc_mach_info {
+	void	(*udc_command)(enum s3c2410_udc_cmd_e);
+	void	(*vbus_draw)(unsigned int ma);
+
+	unsigned int pullup_pin;
+	unsigned int pullup_pin_inverted;
+
+	unsigned int vbus_pin;
+	unsigned char vbus_pin_inverted;
+};
+
+extern void __init s3c24xx_udc_set_platdata(struct s3c2410_udc_mach_info *);
+
+struct s3c24xx_hsudc_platdata;
+
+extern void __init s3c24xx_hsudc_set_platdata(struct s3c24xx_hsudc_platdata *pd);
+
+#endif /* __ASM_ARM_ARCH_UDC_H */
diff --git a/sound/soc/samsung/ac97.c b/sound/soc/samsung/ac97.c
index 3d04c1f..14fbcd3 100644
--- a/sound/soc/samsung/ac97.c
+++ b/sound/soc/samsung/ac97.c
@@ -21,7 +21,7 @@
 
 #include <mach/dma.h>
 #include <plat/regs-ac97.h>
-#include <plat/audio.h>
+#include <linux/platform_data/asoc-s3c.h>
 
 #include "dma.h"
 
diff --git a/sound/soc/samsung/i2s.c b/sound/soc/samsung/i2s.c
index 6ac7b82..40b00a1 100644
--- a/sound/soc/samsung/i2s.c
+++ b/sound/soc/samsung/i2s.c
@@ -20,7 +20,7 @@
 #include <sound/soc.h>
 #include <sound/pcm_params.h>
 
-#include <plat/audio.h>
+#include <linux/platform_data/asoc-s3c.h>
 
 #include "dma.h"
 #include "idma.h"
diff --git a/sound/soc/samsung/pcm.c b/sound/soc/samsung/pcm.c
index 89b0646..c860819 100644
--- a/sound/soc/samsung/pcm.c
+++ b/sound/soc/samsung/pcm.c
@@ -19,7 +19,7 @@
 #include <sound/soc.h>
 #include <sound/pcm_params.h>
 
-#include <plat/audio.h>
+#include <linux/platform_data/asoc-s3c.h>
 #include <mach/dma.h>
 
 #include "dma.h"
diff --git a/sound/soc/samsung/s3c24xx_simtec.c b/sound/soc/samsung/s3c24xx_simtec.c
index 656d5af..335a7d8 100644
--- a/sound/soc/samsung/s3c24xx_simtec.c
+++ b/sound/soc/samsung/s3c24xx_simtec.c
@@ -13,7 +13,7 @@
 
 #include <sound/soc.h>
 
-#include <plat/audio-simtec.h>
+#include <linux/platform_data/asoc-s3c24xx_simtec.h>
 
 #include "s3c24xx-i2s.h"
 #include "s3c24xx_simtec.h"
diff --git a/sound/soc/samsung/spdif.c b/sound/soc/samsung/spdif.c
index a5a56a1..bc24c7a 100644
--- a/sound/soc/samsung/spdif.c
+++ b/sound/soc/samsung/spdif.c
@@ -17,7 +17,7 @@
 #include <sound/soc.h>
 #include <sound/pcm_params.h>
 
-#include <plat/audio.h>
+#include <linux/platform_data/asoc-s3c.h>
 #include <mach/dma.h>
 
 #include "dma.h"
-- 
cgit v0.10.2