From 8125450cd855839c2f6d0eec86c560ffd02db374 Mon Sep 17 00:00:00 2001 From: Masahiro Yamada Date: Tue, 16 Sep 2014 20:04:25 +0900 Subject: mtd: denali: fix indents and other trivial things - Fix indents - Do not break a line unless it is longer than 80 columns - Do not insert a whitespace before ';' - Use whitespaces around operators - Use braces for a "else" block where the "if" block uses ones. Besides, eliminate all the warnings reported by checkpatch.pl: - WARNING: quoted string split across lines - WARNING: else is not generally useful after a break or return - WARNING: Missing a blank line after declarations - WARNING: Avoid line continuations in quoted strings Signed-off-by: Masahiro Yamada Signed-off-by: Brian Norris diff --git a/drivers/mtd/nand/denali.c b/drivers/mtd/nand/denali.c index 945943e..b3b7ca1 100644 --- a/drivers/mtd/nand/denali.c +++ b/drivers/mtd/nand/denali.c @@ -37,8 +37,8 @@ MODULE_LICENSE("GPL"); static int onfi_timing_mode = NAND_DEFAULT_TIMINGS; module_param(onfi_timing_mode, int, S_IRUGO); -MODULE_PARM_DESC(onfi_timing_mode, "Overrides default ONFI setting." - " -1 indicates use default timings"); +MODULE_PARM_DESC(onfi_timing_mode, + "Overrides default ONFI setting. -1 indicates use default timings"); #define DENALI_NAND_NAME "denali-nand" @@ -162,8 +162,7 @@ static void read_status(struct denali_nand_info *denali) static void reset_bank(struct denali_nand_info *denali) { uint32_t irq_status; - uint32_t irq_mask = INTR_STATUS__RST_COMP | - INTR_STATUS__TIME_OUT; + uint32_t irq_mask = INTR_STATUS__RST_COMP | INTR_STATUS__TIME_OUT; clear_interrupts(denali); @@ -181,16 +180,15 @@ static uint16_t denali_nand_reset(struct denali_nand_info *denali) int i; dev_dbg(denali->dev, "%s, Line %d, Function: %s\n", - __FILE__, __LINE__, __func__); + __FILE__, __LINE__, __func__); - for (i = 0 ; i < denali->max_banks; i++) + for (i = 0; i < denali->max_banks; i++) iowrite32(INTR_STATUS__RST_COMP | INTR_STATUS__TIME_OUT, denali->flash_reg + INTR_STATUS(i)); - for (i = 0 ; i < denali->max_banks; i++) { + for (i = 0; i < denali->max_banks; i++) { iowrite32(1 << i, denali->flash_reg + DEVICE_RESET); - while (!(ioread32(denali->flash_reg + - INTR_STATUS(i)) & + while (!(ioread32(denali->flash_reg + INTR_STATUS(i)) & (INTR_STATUS__RST_COMP | INTR_STATUS__TIME_OUT))) cpu_relax(); if (ioread32(denali->flash_reg + INTR_STATUS(i)) & @@ -201,7 +199,7 @@ static uint16_t denali_nand_reset(struct denali_nand_info *denali) for (i = 0; i < denali->max_banks; i++) iowrite32(INTR_STATUS__RST_COMP | INTR_STATUS__TIME_OUT, - denali->flash_reg + INTR_STATUS(i)); + denali->flash_reg + INTR_STATUS(i)); return PASS; } @@ -235,7 +233,7 @@ static void nand_onfi_timing_set(struct denali_nand_info *denali, uint16_t addr_2_data, re_2_we, re_2_re, we_2_re, cs_cnt; dev_dbg(denali->dev, "%s, Line %d, Function: %s\n", - __FILE__, __LINE__, __func__); + __FILE__, __LINE__, __func__); en_lo = CEIL_DIV(Trp[mode], CLK_X); en_hi = CEIL_DIV(Treh[mode], CLK_X); @@ -255,9 +253,8 @@ static void nand_onfi_timing_set(struct denali_nand_info *denali, data_invalid_rloh = (en_lo + en_hi) * CLK_X + Trloh[mode]; - data_invalid = - data_invalid_rhoh < - data_invalid_rloh ? data_invalid_rhoh : data_invalid_rloh; + data_invalid = data_invalid_rhoh < data_invalid_rloh ? + data_invalid_rhoh : data_invalid_rloh; dv_window = data_invalid - Trea[mode]; @@ -272,7 +269,7 @@ static void nand_onfi_timing_set(struct denali_nand_info *denali, if (data_invalid - acc_clks * CLK_X < 2) dev_warn(denali->dev, "%s, Line %d: Warning!\n", - __FILE__, __LINE__); + __FILE__, __LINE__); addr_2_data = CEIL_DIV(Tadl[mode], CLK_X); re_2_we = CEIL_DIV(Trhw[mode], CLK_X); @@ -406,9 +403,9 @@ static void get_hynix_nand_para(struct denali_nand_info *denali, break; default: dev_warn(denali->dev, - "Spectra: Unknown Hynix NAND (Device ID: 0x%x)." - "Will use default parameter values instead.\n", - device_id); + "Spectra: Unknown Hynix NAND (Device ID: 0x%x).\n" + "Will use default parameter values instead.\n", + device_id); } } @@ -425,8 +422,7 @@ static void find_valid_banks(struct denali_nand_info *denali) for (i = 0; i < denali->max_banks; i++) { index_addr(denali, MODE_11 | (i << 24) | 0, 0x90); index_addr(denali, MODE_11 | (i << 24) | 1, 0); - index_addr_read_data(denali, - MODE_11 | (i << 24) | 2, &id[i]); + index_addr_read_data(denali, MODE_11 | (i << 24) | 2, &id[i]); dev_dbg(denali->dev, "Return 1st ID for bank[%d]: %x\n", i, id[i]); @@ -450,8 +446,7 @@ static void find_valid_banks(struct denali_nand_info *denali) */ if (denali->total_used_banks != 1) { dev_err(denali->dev, - "Sorry, Intel CE4100 only supports " - "a single NAND device.\n"); + "Sorry, Intel CE4100 only supports a single NAND device.\n"); BUG(); } } @@ -489,10 +484,12 @@ static void detect_partition_feature(struct denali_nand_info *denali) + (ioread32(denali->flash_reg + MIN_BLK_ADDR(1)) & MIN_BLK_ADDR__VALUE); - } else + } else { denali->fwblks = SPECTRA_START_BLOCK; - } else + } + } else { denali->fwblks = SPECTRA_START_BLOCK; + } } static uint16_t denali_nand_timing_set(struct denali_nand_info *denali) @@ -502,8 +499,7 @@ static uint16_t denali_nand_timing_set(struct denali_nand_info *denali) uint8_t maf_id, device_id; int i; - dev_dbg(denali->dev, - "%s, Line %d, Function: %s\n", + dev_dbg(denali->dev, "%s, Line %d, Function: %s\n", __FILE__, __LINE__, __func__); /* @@ -532,7 +528,7 @@ static uint16_t denali_nand_timing_set(struct denali_nand_info *denali) } dev_info(denali->dev, - "Dump timing register values:" + "Dump timing register values:\n" "acc_clks: %d, re_2_we: %d, re_2_re: %d\n" "we_2_re: %d, addr_2_data: %d, rdwr_en_lo_cnt: %d\n" "rdwr_en_hi_cnt: %d, cs_setup_cnt: %d\n", @@ -563,7 +559,7 @@ static void denali_set_intr_modes(struct denali_nand_info *denali, uint16_t INT_ENABLE) { dev_dbg(denali->dev, "%s, Line %d, Function: %s\n", - __FILE__, __LINE__, __func__); + __FILE__, __LINE__, __func__); if (INT_ENABLE) iowrite32(1, denali->flash_reg + GLOBAL_INT_ENABLE); @@ -710,13 +706,13 @@ static uint32_t wait_for_irq(struct denali_nand_info *denali, uint32_t irq_mask) spin_unlock_irq(&denali->irq_lock); /* our interrupt was detected */ break; - } else { - /* - * these are not the interrupts you are looking for - - * need to wait again - */ - spin_unlock_irq(&denali->irq_lock); } + + /* + * these are not the interrupts you are looking for - + * need to wait again + */ + spin_unlock_irq(&denali->irq_lock); } while (comp_res != 0); if (comp_res == 0) { @@ -744,8 +740,7 @@ static void setup_ecc_for_xfer(struct denali_nand_info *denali, bool ecc_en, /* Enable spare area/ECC per user's request. */ iowrite32(ecc_en_flag, denali->flash_reg + ECC_ENABLE); - iowrite32(transfer_spare_flag, - denali->flash_reg + TRANSFER_SPARE_REG); + iowrite32(transfer_spare_flag, denali->flash_reg + TRANSFER_SPARE_REG); } /* @@ -753,10 +748,8 @@ static void setup_ecc_for_xfer(struct denali_nand_info *denali, bool ecc_en, * controller's user guide for more information (section 4.2.3.6). */ static int denali_send_pipeline_cmd(struct denali_nand_info *denali, - bool ecc_en, - bool transfer_spare, - int access_type, - int op) + bool ecc_en, bool transfer_spare, + int access_type, int op) { int status = PASS; uint32_t page_count = 1; @@ -811,9 +804,8 @@ static int denali_send_pipeline_cmd(struct denali_nand_info *denali, if (irq_status == 0) { dev_err(denali->dev, - "cmd, page, addr on timeout " - "(0x%x, 0x%x, 0x%x)\n", - cmd, denali->page, addr); + "cmd, page, addr on timeout (0x%x, 0x%x, 0x%x)\n", + cmd, denali->page, addr); status = FAIL; } else { cmd = MODE_01 | addr; @@ -826,8 +818,7 @@ static int denali_send_pipeline_cmd(struct denali_nand_info *denali, /* helper function that simply writes a buffer to the flash */ static int write_data_to_flash_mem(struct denali_nand_info *denali, - const uint8_t *buf, - int len) + const uint8_t *buf, int len) { uint32_t *buf32; int i; @@ -842,13 +833,12 @@ static int write_data_to_flash_mem(struct denali_nand_info *denali, buf32 = (uint32_t *)buf; for (i = 0; i < len / 4; i++) iowrite32(*buf32++, denali->flash_mem + 0x10); - return i*4; /* intent is to return the number of bytes read */ + return i * 4; /* intent is to return the number of bytes read */ } /* helper function that simply reads a buffer from the flash */ static int read_data_from_flash_mem(struct denali_nand_info *denali, - uint8_t *buf, - int len) + uint8_t *buf, int len) { uint32_t *buf32; int i; @@ -865,7 +855,7 @@ static int read_data_from_flash_mem(struct denali_nand_info *denali, buf32 = (uint32_t *)buf; for (i = 0; i < len / 4; i++) *buf32++ = ioread32(denali->flash_mem + 0x10); - return i*4; /* intent is to return the number of bytes read */ + return i * 4; /* intent is to return the number of bytes read */ } /* writes OOB data to the device */ @@ -941,6 +931,7 @@ static void read_oob_data(struct mtd_info *mtd, uint8_t *buf, int page) static bool is_erased(uint8_t *buf, int len) { int i; + for (i = 0; i < len; i++) if (buf[i] != 0xFF) return false; @@ -990,6 +981,7 @@ static bool handle_ecc(struct denali_nand_info *denali, uint8_t *buf, */ if (err_byte < ECC_SECTOR_SIZE) { int offset; + offset = (err_sector * ECC_SECTOR_SIZE + err_byte) * @@ -1063,10 +1055,8 @@ static int write_page(struct mtd_info *mtd, struct nand_chip *chip, const uint8_t *buf, bool raw_xfer) { struct denali_nand_info *denali = mtd_to_denali(mtd); - dma_addr_t addr = denali->buf.dma_buf; size_t size = denali->mtd.writesize + denali->mtd.oobsize; - uint32_t irq_status; uint32_t irq_mask = INTR_STATUS__DMA_CMD_COMP | INTR_STATUS__PROGRAM_FAIL; @@ -1099,9 +1089,8 @@ static int write_page(struct mtd_info *mtd, struct nand_chip *chip, irq_status = wait_for_irq(denali, irq_mask); if (irq_status == 0) { - dev_err(denali->dev, - "timeout on write_page (type = %d)\n", - raw_xfer); + dev_err(denali->dev, "timeout on write_page (type = %d)\n", + raw_xfer); denali->status = NAND_STATUS_FAIL; } @@ -1172,9 +1161,9 @@ static int denali_read_page(struct mtd_info *mtd, struct nand_chip *chip, bool check_erased_page = false; if (page != denali->page) { - dev_err(denali->dev, "IN %s: page %d is not" - " equal to denali->page %d, investigate!!", - __func__, page, denali->page); + dev_err(denali->dev, + "IN %s: page %d is not equal to denali->page %d", + __func__, page, denali->page); BUG(); } @@ -1214,16 +1203,14 @@ static int denali_read_page_raw(struct mtd_info *mtd, struct nand_chip *chip, uint8_t *buf, int oob_required, int page) { struct denali_nand_info *denali = mtd_to_denali(mtd); - dma_addr_t addr = denali->buf.dma_buf; size_t size = denali->mtd.writesize + denali->mtd.oobsize; - uint32_t irq_mask = INTR_STATUS__DMA_CMD_COMP; if (page != denali->page) { - dev_err(denali->dev, "IN %s: page %d is not" - " equal to denali->page %d, investigate!!", - __func__, page, denali->page); + dev_err(denali->dev, + "IN %s: page %d is not equal to denali->page %d", + __func__, page, denali->page); BUG(); } @@ -1272,6 +1259,7 @@ static int denali_waitfunc(struct mtd_info *mtd, struct nand_chip *chip) { struct denali_nand_info *denali = mtd_to_denali(mtd); int status = denali->status; + denali->status = 0; return status; @@ -1321,9 +1309,7 @@ static void denali_cmdfunc(struct mtd_info *mtd, unsigned int cmd, int col, index_addr(denali, addr | 0, 0x90); index_addr(denali, addr | 1, 0); for (i = 0; i < 8; i++) { - index_addr_read_data(denali, - addr | 2, - &id); + index_addr_read_data(denali, addr | 2, &id); write_byte_to_buf(denali, id); } break; @@ -1348,8 +1334,8 @@ static int denali_ecc_calculate(struct mtd_info *mtd, const uint8_t *data, uint8_t *ecc_code) { struct denali_nand_info *denali = mtd_to_denali(mtd); - dev_err(denali->dev, - "denali_ecc_calculate called unexpectedly\n"); + + dev_err(denali->dev, "denali_ecc_calculate called unexpectedly\n"); BUG(); return -EIO; } @@ -1358,8 +1344,8 @@ static int denali_ecc_correct(struct mtd_info *mtd, uint8_t *data, uint8_t *read_ecc, uint8_t *calc_ecc) { struct denali_nand_info *denali = mtd_to_denali(mtd); - dev_err(denali->dev, - "denali_ecc_correct called unexpectedly\n"); + + dev_err(denali->dev, "denali_ecc_correct called unexpectedly\n"); BUG(); return -EIO; } @@ -1367,8 +1353,8 @@ static int denali_ecc_correct(struct mtd_info *mtd, uint8_t *data, static void denali_ecc_hwctl(struct mtd_info *mtd, int mode) { struct denali_nand_info *denali = mtd_to_denali(mtd); - dev_err(denali->dev, - "denali_ecc_hwctl called unexpectedly\n"); + + dev_err(denali->dev, "denali_ecc_hwctl called unexpectedly\n"); BUG(); } /* end NAND core entry points */ @@ -1596,8 +1582,7 @@ int denali_init(struct denali_nand_info *denali) } else if (denali->mtd.oobsize < (denali->bbtskipbytes + ECC_8BITS * (denali->mtd.writesize / ECC_SECTOR_SIZE))) { - pr_err("Your NAND chip OOB is not large enough to \ - contain 8bit ECC correction codes"); + pr_err("Your NAND chip OOB is not large enough to contain 8bit ECC correction codes"); goto failed_req_irq; } else { denali->nand.ecc.strength = 8; @@ -1621,8 +1606,7 @@ int denali_init(struct denali_nand_info *denali) * contained by each nand chip. blksperchip will help driver to * know how many blocks is taken by FW. */ - denali->totalblks = denali->mtd.size >> - denali->nand.phys_erase_shift; + denali->totalblks = denali->mtd.size >> denali->nand.phys_erase_shift; denali->blksperchip = denali->totalblks / denali->nand.numchips; /* @@ -1669,7 +1653,7 @@ void denali_remove(struct denali_nand_info *denali) { denali_irq_cleanup(denali->irq, denali); dma_unmap_single(denali->dev, denali->buf.dma_buf, - denali->mtd.writesize + denali->mtd.oobsize, - DMA_BIDIRECTIONAL); + denali->mtd.writesize + denali->mtd.oobsize, + DMA_BIDIRECTIONAL); } EXPORT_SYMBOL(denali_remove); -- cgit v0.10.2