From cd9d11820f4232856d6254a29fbb9c4f51a981c2 Mon Sep 17 00:00:00 2001
From: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Date: Mon, 12 Aug 2013 14:14:48 -0300
Subject: mtd: nand: pxa3xx: Handle ECC and DMA enable/disable properly

When ECC is not selected, the ECC enable bit must be cleared
in the NAND control register. Same applies to DMA.

Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Tested-by: Daniel Mack <zonque@gmail.com>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>

diff --git a/drivers/mtd/nand/pxa3xx_nand.c b/drivers/mtd/nand/pxa3xx_nand.c
index c4bff66..1dcda6b 100644
--- a/drivers/mtd/nand/pxa3xx_nand.c
+++ b/drivers/mtd/nand/pxa3xx_nand.c
@@ -314,8 +314,17 @@ static void pxa3xx_nand_start(struct pxa3xx_nand_info *info)
 	uint32_t ndcr;
 
 	ndcr = host->reg_ndcr;
-	ndcr |= info->use_ecc ? NDCR_ECC_EN : 0;
-	ndcr |= info->use_dma ? NDCR_DMA_EN : 0;
+
+	if (info->use_ecc)
+		ndcr |= NDCR_ECC_EN;
+	else
+		ndcr &= ~NDCR_ECC_EN;
+
+	if (info->use_dma)
+		ndcr |= NDCR_DMA_EN;
+	else
+		ndcr &= ~NDCR_DMA_EN;
+
 	ndcr |= NDCR_ND_RUN;
 
 	/* clear status bits and run */
-- 
cgit v0.10.2