From 5d67c1c593d005653357d638569d85ede4a365a3 Mon Sep 17 00:00:00 2001 From: Yuval Mintz Date: Thu, 25 Jun 2015 15:19:22 +0300 Subject: bnx2x: Correct speed from baseT into KR. ethtool shows KR supported/advertised speeds incorrectly as baseT in cases the board is in fact KR-base. Signed-off-by: Yaniv Rosner Signed-off-by: Yuval Mintz Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c index 48ed005..733b0fc 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c @@ -257,14 +257,15 @@ static int bnx2x_get_settings(struct net_device *dev, struct ethtool_cmd *cmd) { struct bnx2x *bp = netdev_priv(dev); int cfg_idx = bnx2x_get_link_cfg_idx(bp); + u32 media_type; /* Dual Media boards present all available port types */ cmd->supported = bp->port.supported[cfg_idx] | (bp->port.supported[cfg_idx ^ 1] & (SUPPORTED_TP | SUPPORTED_FIBRE)); cmd->advertising = bp->port.advertising[cfg_idx]; - if (bp->link_params.phy[bnx2x_get_cur_phy_idx(bp)].media_type == - ETH_PHY_SFP_1G_FIBER) { + media_type = bp->link_params.phy[bnx2x_get_cur_phy_idx(bp)].media_type; + if (media_type == ETH_PHY_SFP_1G_FIBER) { cmd->supported &= ~(SUPPORTED_10000baseT_Full); cmd->advertising &= ~(ADVERTISED_10000baseT_Full); } @@ -312,12 +313,26 @@ static int bnx2x_get_settings(struct net_device *dev, struct ethtool_cmd *cmd) cmd->lp_advertising |= ADVERTISED_100baseT_Full; if (status & LINK_STATUS_LINK_PARTNER_1000THD_CAPABLE) cmd->lp_advertising |= ADVERTISED_1000baseT_Half; - if (status & LINK_STATUS_LINK_PARTNER_1000TFD_CAPABLE) - cmd->lp_advertising |= ADVERTISED_1000baseT_Full; + if (status & LINK_STATUS_LINK_PARTNER_1000TFD_CAPABLE) { + if (media_type == ETH_PHY_KR) { + cmd->lp_advertising |= + ADVERTISED_1000baseKX_Full; + } else { + cmd->lp_advertising |= + ADVERTISED_1000baseT_Full; + } + } if (status & LINK_STATUS_LINK_PARTNER_2500XFD_CAPABLE) cmd->lp_advertising |= ADVERTISED_2500baseX_Full; - if (status & LINK_STATUS_LINK_PARTNER_10GXFD_CAPABLE) - cmd->lp_advertising |= ADVERTISED_10000baseT_Full; + if (status & LINK_STATUS_LINK_PARTNER_10GXFD_CAPABLE) { + if (media_type == ETH_PHY_KR) { + cmd->lp_advertising |= + ADVERTISED_10000baseKR_Full; + } else { + cmd->lp_advertising |= + ADVERTISED_10000baseT_Full; + } + } if (status & LINK_STATUS_LINK_PARTNER_20GXFD_CAPABLE) cmd->lp_advertising |= ADVERTISED_20000baseKR2_Full; } @@ -564,15 +579,20 @@ static int bnx2x_set_settings(struct net_device *dev, struct ethtool_cmd *cmd) return -EINVAL; } - if (!(bp->port.supported[cfg_idx] & - SUPPORTED_1000baseT_Full)) { + if (bp->port.supported[cfg_idx] & + SUPPORTED_1000baseT_Full) { + advertising = (ADVERTISED_1000baseT_Full | + ADVERTISED_TP); + + } else if (bp->port.supported[cfg_idx] & + SUPPORTED_1000baseKX_Full) { + advertising = ADVERTISED_1000baseKX_Full; + } else { DP(BNX2X_MSG_ETHTOOL, "1G full not supported\n"); return -EINVAL; } - advertising = (ADVERTISED_1000baseT_Full | - ADVERTISED_TP); break; case SPEED_2500: @@ -600,17 +620,22 @@ static int bnx2x_set_settings(struct net_device *dev, struct ethtool_cmd *cmd) return -EINVAL; } phy_idx = bnx2x_get_cur_phy_idx(bp); - if (!(bp->port.supported[cfg_idx] - & SUPPORTED_10000baseT_Full) || - (bp->link_params.phy[phy_idx].media_type == + if ((bp->port.supported[cfg_idx] & + SUPPORTED_10000baseT_Full) && + (bp->link_params.phy[phy_idx].media_type != ETH_PHY_SFP_1G_FIBER)) { + advertising = (ADVERTISED_10000baseT_Full | + ADVERTISED_FIBRE); + } else if (bp->port.supported[cfg_idx] & + SUPPORTED_10000baseKR_Full) { + advertising = (ADVERTISED_10000baseKR_Full | + ADVERTISED_FIBRE); + } else { DP(BNX2X_MSG_ETHTOOL, "10G full not supported\n"); return -EINVAL; } - advertising = (ADVERTISED_10000baseT_Full | - ADVERTISED_FIBRE); break; default: diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c index b287fc8..a0b03c2 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c @@ -11493,7 +11493,9 @@ static const struct bnx2x_phy phy_warpcore = { SUPPORTED_100baseT_Half | SUPPORTED_100baseT_Full | SUPPORTED_1000baseT_Full | + SUPPORTED_1000baseKX_Full | SUPPORTED_10000baseT_Full | + SUPPORTED_10000baseKR_Full | SUPPORTED_20000baseKR2_Full | SUPPORTED_20000baseMLD2_Full | SUPPORTED_FIBRE | @@ -11999,8 +12001,8 @@ static int bnx2x_populate_int_phy(struct bnx2x *bp, u32 shmem_base, u8 port, break; case PORT_HW_CFG_NET_SERDES_IF_KR: phy->media_type = ETH_PHY_KR; - phy->supported &= (SUPPORTED_1000baseT_Full | - SUPPORTED_10000baseT_Full | + phy->supported &= (SUPPORTED_1000baseKX_Full | + SUPPORTED_10000baseKR_Full | SUPPORTED_FIBRE | SUPPORTED_Autoneg | SUPPORTED_Pause | @@ -12018,8 +12020,8 @@ static int bnx2x_populate_int_phy(struct bnx2x *bp, u32 shmem_base, u8 port, phy->media_type = ETH_PHY_KR; phy->flags |= FLAGS_WC_DUAL_MODE; phy->supported &= (SUPPORTED_20000baseKR2_Full | - SUPPORTED_10000baseT_Full | - SUPPORTED_1000baseT_Full | + SUPPORTED_10000baseKR_Full | + SUPPORTED_1000baseKX_Full | SUPPORTED_Autoneg | SUPPORTED_FIBRE | SUPPORTED_Pause | diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c index a03a9f2..bf5f5df 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c @@ -11143,6 +11143,12 @@ static void bnx2x_link_settings_requested(struct bnx2x *bp) bp->port.advertising[idx] |= (ADVERTISED_1000baseT_Full | ADVERTISED_TP); + } else if (bp->port.supported[idx] & + SUPPORTED_1000baseKX_Full) { + bp->link_params.req_line_speed[idx] = + SPEED_1000; + bp->port.advertising[idx] |= + ADVERTISED_1000baseKX_Full; } else { BNX2X_ERR("NVRAM config error. Invalid link_config 0x%x speed_cap_mask 0x%x\n", link_config, @@ -11175,6 +11181,13 @@ static void bnx2x_link_settings_requested(struct bnx2x *bp) bp->port.advertising[idx] |= (ADVERTISED_10000baseT_Full | ADVERTISED_FIBRE); + } else if (bp->port.supported[idx] & + SUPPORTED_10000baseKR_Full) { + bp->link_params.req_line_speed[idx] = + SPEED_10000; + bp->port.advertising[idx] |= + (ADVERTISED_10000baseKR_Full | + ADVERTISED_FIBRE); } else { BNX2X_ERR("NVRAM config error. Invalid link_config 0x%x speed_cap_mask 0x%x\n", link_config, -- cgit v0.10.2