From 64ec42fe272322c73ee159c68f7fb31896f65d1a Mon Sep 17 00:00:00 2001 From: Moritz Fischer Date: Tue, 29 Mar 2016 19:11:12 -0700 Subject: net: macb: Fix coding style warnings This commit takes care of the coding style warnings that are mostly due to a different comment style and lines over 80 chars, as well as a dangling else. Acked-by: Nicolas Ferre Signed-off-by: Moritz Fischer Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/cadence/macb.c b/drivers/net/ethernet/cadence/macb.c index b5aa96e..f25681b 100644 --- a/drivers/net/ethernet/cadence/macb.c +++ b/drivers/net/ethernet/cadence/macb.c @@ -61,8 +61,7 @@ #define MACB_WOL_HAS_MAGIC_PACKET (0x1 << 0) #define MACB_WOL_ENABLED (0x1 << 1) -/* - * Graceful stop timeouts in us. We should allow up to +/* Graceful stop timeouts in us. We should allow up to * 1 frame time (10 Mbits/s, full-duplex, ignoring collisions) */ #define MACB_HALT_TIMEOUT 1230 @@ -130,8 +129,7 @@ static void hw_writel(struct macb *bp, int offset, u32 value) writel_relaxed(value, bp->regs + offset); } -/* - * Find the CPU endianness by using the loopback bit of NCR register. When the +/* Find the CPU endianness by using the loopback bit of NCR register. When the * CPU is in big endian we need to program swaped mode for management * descriptor access. */ @@ -386,7 +384,8 @@ static int macb_mii_probe(struct net_device *dev) pdata = dev_get_platdata(&bp->pdev->dev); if (pdata && gpio_is_valid(pdata->phy_irq_pin)) { - ret = devm_gpio_request(&bp->pdev->dev, pdata->phy_irq_pin, "phy int"); + ret = devm_gpio_request(&bp->pdev->dev, pdata->phy_irq_pin, + "phy int"); if (!ret) { phy_irq = gpio_to_irq(pdata->phy_irq_pin); phydev->irq = (phy_irq < 0) ? PHY_POLL : phy_irq; @@ -452,7 +451,8 @@ static int macb_mii_init(struct macb *bp) err = of_mdiobus_register(bp->mii_bus, np); /* fallback to standard phy registration if no phy were - found during dt phy registration */ + * found during dt phy registration + */ if (!err && !phy_find_first(bp->mii_bus)) { for (i = 0; i < PHY_MAX_ADDR; i++) { struct phy_device *phydev; @@ -567,8 +567,7 @@ static void macb_tx_error_task(struct work_struct *work) /* Make sure nobody is trying to queue up new packets */ netif_tx_stop_all_queues(bp->dev); - /* - * Stop transmission now + /* Stop transmission now * (in case we have just queued new packets) * macb/gem must be halted to write TBQP register */ @@ -576,8 +575,7 @@ static void macb_tx_error_task(struct work_struct *work) /* Just complain for now, reinitializing TX path can be good */ netdev_err(bp->dev, "BUG: halt tx timed out\n"); - /* - * Treat frames in TX queue including the ones that caused the error. + /* Treat frames in TX queue including the ones that caused the error. * Free transmit buffers in upper layer. */ for (tail = queue->tx_tail; tail != queue->tx_head; tail++) { @@ -607,10 +605,9 @@ static void macb_tx_error_task(struct work_struct *work) bp->stats.tx_bytes += skb->len; } } else { - /* - * "Buffers exhausted mid-frame" errors may only happen - * if the driver is buggy, so complain loudly about those. - * Statistics are updated by hardware. + /* "Buffers exhausted mid-frame" errors may only happen + * if the driver is buggy, so complain loudly about + * those. Statistics are updated by hardware. */ if (ctrl & MACB_BIT(TX_BUF_EXHAUSTED)) netdev_err(bp->dev, @@ -722,7 +719,8 @@ static void gem_rx_refill(struct macb *bp) struct sk_buff *skb; dma_addr_t paddr; - while (CIRC_SPACE(bp->rx_prepared_head, bp->rx_tail, RX_RING_SIZE) > 0) { + while (CIRC_SPACE(bp->rx_prepared_head, bp->rx_tail, + RX_RING_SIZE) > 0) { entry = macb_rx_ring_wrap(bp->rx_prepared_head); /* Make hw descriptor updates visible to CPU */ @@ -741,7 +739,8 @@ static void gem_rx_refill(struct macb *bp) /* now fill corresponding descriptor entry */ paddr = dma_map_single(&bp->pdev->dev, skb->data, - bp->rx_buffer_size, DMA_FROM_DEVICE); + bp->rx_buffer_size, + DMA_FROM_DEVICE); if (dma_mapping_error(&bp->pdev->dev, paddr)) { dev_kfree_skb(skb); break; @@ -777,14 +776,14 @@ static void discard_partial_frame(struct macb *bp, unsigned int begin, for (frag = begin; frag != end; frag++) { struct macb_dma_desc *desc = macb_rx_desc(bp, frag); + desc->addr &= ~MACB_BIT(RX_USED); } /* Make descriptor updates visible to hardware */ wmb(); - /* - * When this happens, the hardware stats registers for + /* When this happens, the hardware stats registers for * whatever caused this is updated, so we don't have to record * anything. */ @@ -883,8 +882,7 @@ static int macb_rx_frame(struct macb *bp, unsigned int first_frag, macb_rx_ring_wrap(first_frag), macb_rx_ring_wrap(last_frag), len); - /* - * The ethernet header starts NET_IP_ALIGN bytes into the + /* The ethernet header starts NET_IP_ALIGN bytes into the * first buffer. Since the header is 14 bytes, this makes the * payload word-aligned. * @@ -1099,8 +1097,7 @@ static irqreturn_t macb_interrupt(int irq, void *dev_id) (unsigned long)status); if (status & MACB_RX_INT_FLAGS) { - /* - * There's no point taking any more interrupts + /* There's no point taking any more interrupts * until we have processed the buffers. The * scheduling call may fail if the poll routine * is already scheduled, so disable interrupts @@ -1129,8 +1126,7 @@ static irqreturn_t macb_interrupt(int irq, void *dev_id) if (status & MACB_BIT(TCOMP)) macb_tx_interrupt(queue); - /* - * Link change detection isn't possible with RMII, so we'll + /* Link change detection isn't possible with RMII, so we'll * add that if/when we get our hands on a full-blown MII PHY. */ @@ -1161,8 +1157,7 @@ static irqreturn_t macb_interrupt(int irq, void *dev_id) } if (status & MACB_BIT(HRESP)) { - /* - * TODO: Reset the hardware, and maybe move the + /* TODO: Reset the hardware, and maybe move the * netdev_err to a lower-priority context as well * (work queue?) */ @@ -1181,8 +1176,7 @@ static irqreturn_t macb_interrupt(int irq, void *dev_id) } #ifdef CONFIG_NET_POLL_CONTROLLER -/* - * Polling receive - used by netconsole and other diagnostic tools +/* Polling receive - used by netconsole and other diagnostic tools * to allow network i/o with interrupts disabled. */ static void macb_poll_controller(struct net_device *dev) @@ -1478,10 +1472,10 @@ static int gem_alloc_rx_buffers(struct macb *bp) bp->rx_skbuff = kzalloc(size, GFP_KERNEL); if (!bp->rx_skbuff) return -ENOMEM; - else - netdev_dbg(bp->dev, - "Allocated %d RX struct sk_buff entries at %p\n", - RX_RING_SIZE, bp->rx_skbuff); + + netdev_dbg(bp->dev, + "Allocated %d RX struct sk_buff entries at %p\n", + RX_RING_SIZE, bp->rx_skbuff); return 0; } @@ -1494,10 +1488,10 @@ static int macb_alloc_rx_buffers(struct macb *bp) &bp->rx_buffers_dma, GFP_KERNEL); if (!bp->rx_buffers) return -ENOMEM; - else - netdev_dbg(bp->dev, - "Allocated RX buffers of %d bytes at %08lx (mapped %p)\n", - size, (unsigned long)bp->rx_buffers_dma, bp->rx_buffers); + + netdev_dbg(bp->dev, + "Allocated RX buffers of %d bytes at %08lx (mapped %p)\n", + size, (unsigned long)bp->rx_buffers_dma, bp->rx_buffers); return 0; } @@ -1588,8 +1582,7 @@ static void macb_reset_hw(struct macb *bp) struct macb_queue *queue; unsigned int q; - /* - * Disable RX and TX (XXX: Should we halt the transmission + /* Disable RX and TX (XXX: Should we halt the transmission * more gracefully?) */ macb_writel(bp, NCR, 0); @@ -1652,8 +1645,7 @@ static u32 macb_mdc_clk_div(struct macb *bp) return config; } -/* - * Get the DMA bus width field of the network configuration register that we +/* Get the DMA bus width field of the network configuration register that we * should program. We find the width from decoding the design configuration * register to find the maximum supported data bus width. */ @@ -1673,8 +1665,7 @@ static u32 macb_dbw(struct macb *bp) } } -/* - * Configure the receive DMA engine +/* Configure the receive DMA engine * - use the correct receive buffer size * - set best burst length for DMA operations * (if not supported by FIFO, it will fallback to default) @@ -1762,8 +1753,7 @@ static void macb_init_hw(struct macb *bp) macb_writel(bp, NCR, MACB_BIT(RE) | MACB_BIT(TE) | MACB_BIT(MPE)); } -/* - * The hash address register is 64 bits long and takes up two +/* The hash address register is 64 bits long and takes up two * locations in the memory map. The least significant bits are stored * in EMAC_HSL and the most significant bits in EMAC_HSH. * @@ -1803,9 +1793,7 @@ static inline int hash_bit_value(int bitnr, __u8 *addr) return 0; } -/* - * Return the hash index value for the specified address. - */ +/* Return the hash index value for the specified address. */ static int hash_get_index(__u8 *addr) { int i, j, bitval; @@ -1821,9 +1809,7 @@ static int hash_get_index(__u8 *addr) return hash_index; } -/* - * Add multicast addresses to the internal multicast-hash table. - */ +/* Add multicast addresses to the internal multicast-hash table. */ static void macb_sethashtable(struct net_device *dev) { struct netdev_hw_addr *ha; @@ -1842,9 +1828,7 @@ static void macb_sethashtable(struct net_device *dev) macb_or_gem_writel(bp, HRT, mc_filter[1]); } -/* - * Enable/Disable promiscuous and multicast modes. - */ +/* Enable/Disable promiscuous and multicast modes. */ static void macb_set_rx_mode(struct net_device *dev) { unsigned long cfg; @@ -2161,9 +2145,8 @@ static void macb_get_regs(struct net_device *dev, struct ethtool_regs *regs, if (!(bp->caps & MACB_CAPS_USRIO_DISABLED)) regs_buff[12] = macb_or_gem_readl(bp, USRIO); - if (macb_is_gem(bp)) { + if (macb_is_gem(bp)) regs_buff[13] = gem_readl(bp, DMACFG); - } } static void macb_get_wol(struct net_device *netdev, struct ethtool_wolinfo *wol) @@ -2286,11 +2269,11 @@ static const struct net_device_ops macb_netdev_ops = { .ndo_set_features = macb_set_features, }; -/* - * Configure peripheral capabilities according to device tree +/* Configure peripheral capabilities according to device tree * and integration options used */ -static void macb_configure_caps(struct macb *bp, const struct macb_config *dt_conf) +static void macb_configure_caps(struct macb *bp, + const struct macb_config *dt_conf) { u32 dcfg; @@ -2996,6 +2979,7 @@ static int macb_probe(struct platform_device *pdev) phy_node = of_get_next_available_child(np, NULL); if (phy_node) { int gpio = of_get_named_gpio(phy_node, "reset-gpios", 0); + if (gpio_is_valid(gpio)) { bp->reset_gpio = gpio_to_desc(gpio); gpiod_direction_output(bp->reset_gpio, 1); -- cgit v0.10.2