From 849c45423c0c108e08d67644728cc9b0ed225fa1 Mon Sep 17 00:00:00 2001 From: Emil Tantilov Date: Thu, 3 Jun 2010 16:53:41 +0000 Subject: ixgbe: Use netdev_, dev_, pr_ This patch is alternative to a previous patch submitted by Joe Perches. Create common macros e_ and e_dev_ that use netdev_ and dev_ similar to e1000e. Redefined pr_fmt for driver messages. Use %pM to display MAC address. Aligned text to better match the new format. CC: Joe Perches Signed-off-by: Emil Tantilov Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller diff --git a/drivers/net/ixgbe/ixgbe.h b/drivers/net/ixgbe/ixgbe.h index ffae480..9270089 100644 --- a/drivers/net/ixgbe/ixgbe.h +++ b/drivers/net/ixgbe/ixgbe.h @@ -44,11 +44,9 @@ #include #endif -#define PFX "ixgbe: " -#define DPRINTK(nlevel, klevel, fmt, args...) \ - ((void)((NETIF_MSG_##nlevel & adapter->msg_enable) && \ - printk(KERN_##klevel PFX "%s: %s: " fmt, adapter->netdev->name, \ - __func__ , ## args))) +/* common prefix used by pr_<> macros */ +#undef pr_fmt +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt /* TX/RX descriptor defines */ #define IXGBE_DEFAULT_TXD 512 diff --git a/drivers/net/ixgbe/ixgbe_82599.c b/drivers/net/ixgbe/ixgbe_82599.c index a4e2901..976fd9e 100644 --- a/drivers/net/ixgbe/ixgbe_82599.c +++ b/drivers/net/ixgbe/ixgbe_82599.c @@ -707,9 +707,8 @@ static s32 ixgbe_setup_mac_link_smartspeed(struct ixgbe_hw *hw, out: if (link_up && (link_speed == IXGBE_LINK_SPEED_1GB_FULL)) - netif_info(adapter, hw, adapter->netdev, "Smartspeed has" - " downgraded the link speed from the maximum" - " advertised\n"); + e_info("Smartspeed has downgraded the link speed from " + "the maximum advertised\n"); return status; } diff --git a/drivers/net/ixgbe/ixgbe_common.h b/drivers/net/ixgbe/ixgbe_common.h index 3080afb..d5d3aae 100644 --- a/drivers/net/ixgbe/ixgbe_common.h +++ b/drivers/net/ixgbe/ixgbe_common.h @@ -105,12 +105,26 @@ s32 ixgbe_blink_led_stop_generic(struct ixgbe_hw *hw, u32 index); #define IXGBE_WRITE_FLUSH(a) IXGBE_READ_REG(a, IXGBE_STATUS) -#ifdef DEBUG -extern char *ixgbe_get_hw_dev_name(struct ixgbe_hw *hw); +extern struct net_device *ixgbe_get_hw_dev(struct ixgbe_hw *hw); #define hw_dbg(hw, format, arg...) \ - printk(KERN_DEBUG "%s: " format, ixgbe_get_hw_dev_name(hw), ##arg) -#else -#define hw_dbg(hw, format, arg...) do {} while (0) -#endif + netdev_dbg(ixgbe_get_hw_dev(hw), format, ##arg) +#define e_err(format, arg...) \ + netdev_err(adapter->netdev, format, ## arg) +#define e_info(format, arg...) \ + netdev_info(adapter->netdev, format, ## arg) +#define e_warn(format, arg...) \ + netdev_warn(adapter->netdev, format, ## arg) +#define e_notice(format, arg...) \ + netdev_notice(adapter->netdev, format, ## arg) +#define e_crit(format, arg...) \ + netdev_crit(adapter->netdev, format, ## arg) +#define e_dev_info(format, arg...) \ + dev_info(&adapter->pdev->dev, format, ## arg) +#define e_dev_warn(format, arg...) \ + dev_warn(&adapter->pdev->dev, format, ## arg) +#define e_dev_err(format, arg...) \ + dev_err(&adapter->pdev->dev, format, ## arg) +#define e_dev_notice(format, arg...) \ + dev_notice(&adapter->pdev->dev, format, ## arg) #endif /* IXGBE_COMMON */ diff --git a/drivers/net/ixgbe/ixgbe_dcb_nl.c b/drivers/net/ixgbe/ixgbe_dcb_nl.c index 71da325..6576235 100644 --- a/drivers/net/ixgbe/ixgbe_dcb_nl.c +++ b/drivers/net/ixgbe/ixgbe_dcb_nl.c @@ -121,7 +121,7 @@ static u8 ixgbe_dcbnl_set_state(struct net_device *netdev, u8 state) goto out; if (!(adapter->flags & IXGBE_FLAG_MSIX_ENABLED)) { - DPRINTK(DRV, ERR, "Enable failed, needs MSI-X\n"); + e_err("Enable failed, needs MSI-X\n"); err = 1; goto out; } diff --git a/drivers/net/ixgbe/ixgbe_ethtool.c b/drivers/net/ixgbe/ixgbe_ethtool.c index c50a754..644e3d2 100644 --- a/drivers/net/ixgbe/ixgbe_ethtool.c +++ b/drivers/net/ixgbe/ixgbe_ethtool.c @@ -294,8 +294,7 @@ static int ixgbe_set_settings(struct net_device *netdev, hw->mac.autotry_restart = true; err = hw->mac.ops.setup_link(hw, advertised, true, true); if (err) { - DPRINTK(PROBE, INFO, - "setup link failed with code %d\n", err); + e_info("setup link failed with code %d\n", err); hw->mac.ops.setup_link(hw, old, true, true); } } else { @@ -1188,9 +1187,9 @@ static struct ixgbe_reg_test reg_test_82598[] = { writel((_test[pat] & W), (adapter->hw.hw_addr + R)); \ val = readl(adapter->hw.hw_addr + R); \ if (val != (_test[pat] & W & M)) { \ - DPRINTK(DRV, ERR, "pattern test reg %04X failed: got "\ - "0x%08X expected 0x%08X\n", \ - R, val, (_test[pat] & W & M)); \ + e_err("pattern test reg %04X failed: got " \ + "0x%08X expected 0x%08X\n", \ + R, val, (_test[pat] & W & M)); \ *data = R; \ writel(before, adapter->hw.hw_addr + R); \ return 1; \ @@ -1206,8 +1205,8 @@ static struct ixgbe_reg_test reg_test_82598[] = { writel((W & M), (adapter->hw.hw_addr + R)); \ val = readl(adapter->hw.hw_addr + R); \ if ((W & M) != (val & M)) { \ - DPRINTK(DRV, ERR, "set/check reg %04X test failed: got 0x%08X "\ - "expected 0x%08X\n", R, (val & M), (W & M)); \ + e_err("set/check reg %04X test failed: got 0x%08X " \ + "expected 0x%08X\n", R, (val & M), (W & M)); \ *data = R; \ writel(before, (adapter->hw.hw_addr + R)); \ return 1; \ @@ -1240,8 +1239,8 @@ static int ixgbe_reg_test(struct ixgbe_adapter *adapter, u64 *data) IXGBE_WRITE_REG(&adapter->hw, IXGBE_STATUS, toggle); after = IXGBE_READ_REG(&adapter->hw, IXGBE_STATUS) & toggle; if (value != after) { - DPRINTK(DRV, ERR, "failed STATUS register test got: " - "0x%08X expected: 0x%08X\n", after, value); + e_err("failed STATUS register test got: 0x%08X expected: " + "0x%08X\n", after, value); *data = 1; return 1; } @@ -1341,8 +1340,8 @@ static int ixgbe_intr_test(struct ixgbe_adapter *adapter, u64 *data) *data = 1; return -1; } - DPRINTK(HW, INFO, "testing %s interrupt\n", - (shared_int ? "shared" : "unshared")); + e_info("testing %s interrupt\n", shared_int ? + "shared" : "unshared"); /* Disable all the interrupts */ IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIMC, 0xFFFFFFFF); @@ -1847,7 +1846,7 @@ static void ixgbe_diag_test(struct net_device *netdev, if (eth_test->flags == ETH_TEST_FL_OFFLINE) { /* Offline tests */ - DPRINTK(HW, INFO, "offline testing starting\n"); + e_info("offline testing starting\n"); /* Link test performed before hardware reset so autoneg doesn't * interfere with test result */ @@ -1880,17 +1879,17 @@ static void ixgbe_diag_test(struct net_device *netdev, else ixgbe_reset(adapter); - DPRINTK(HW, INFO, "register testing starting\n"); + e_info("register testing starting\n"); if (ixgbe_reg_test(adapter, &data[0])) eth_test->flags |= ETH_TEST_FL_FAILED; ixgbe_reset(adapter); - DPRINTK(HW, INFO, "eeprom testing starting\n"); + e_info("eeprom testing starting\n"); if (ixgbe_eeprom_test(adapter, &data[1])) eth_test->flags |= ETH_TEST_FL_FAILED; ixgbe_reset(adapter); - DPRINTK(HW, INFO, "interrupt testing starting\n"); + e_info("interrupt testing starting\n"); if (ixgbe_intr_test(adapter, &data[2])) eth_test->flags |= ETH_TEST_FL_FAILED; @@ -1898,14 +1897,13 @@ static void ixgbe_diag_test(struct net_device *netdev, * loopback diagnostic. */ if (adapter->flags & (IXGBE_FLAG_SRIOV_ENABLED | IXGBE_FLAG_VMDQ_ENABLED)) { - DPRINTK(HW, INFO, "Skip MAC loopback diagnostic in VT " - "mode\n"); + e_info("Skip MAC loopback diagnostic in VT mode\n"); data[3] = 0; goto skip_loopback; } ixgbe_reset(adapter); - DPRINTK(HW, INFO, "loopback testing starting\n"); + e_info("loopback testing starting\n"); if (ixgbe_loopback_test(adapter, &data[3])) eth_test->flags |= ETH_TEST_FL_FAILED; @@ -1916,7 +1914,7 @@ skip_loopback: if (if_running) dev_open(netdev); } else { - DPRINTK(HW, INFO, "online testing starting\n"); + e_info("online testing starting\n"); /* Online tests */ if (ixgbe_link_test(adapter, &data[4])) eth_test->flags |= ETH_TEST_FL_FAILED; @@ -2089,8 +2087,8 @@ static bool ixgbe_reenable_rsc(struct ixgbe_adapter *adapter, (adapter->flags2 & IXGBE_FLAG2_RSC_CAPABLE)) { adapter->flags2 |= IXGBE_FLAG2_RSC_ENABLED; adapter->netdev->features |= NETIF_F_LRO; - DPRINTK(PROBE, INFO, "rx-usecs set to %d, re-enabling RSC\n", - ec->rx_coalesce_usecs); + e_info("rx-usecs set to %d, re-enabling RSC\n", + ec->rx_coalesce_usecs); return true; } return false; @@ -2158,8 +2156,7 @@ static int ixgbe_set_coalesce(struct net_device *netdev, if (adapter->flags2 & IXGBE_FLAG2_RSC_ENABLED) { adapter->flags2 &= ~IXGBE_FLAG2_RSC_ENABLED; netdev->features &= ~NETIF_F_LRO; - DPRINTK(PROBE, INFO, - "rx-usecs set to 0, disabling RSC\n"); + e_info("rx-usecs set to 0, disabling RSC\n"); need_reset = true; } diff --git a/drivers/net/ixgbe/ixgbe_fcoe.c b/drivers/net/ixgbe/ixgbe_fcoe.c index 45182ab..84e1194 100644 --- a/drivers/net/ixgbe/ixgbe_fcoe.c +++ b/drivers/net/ixgbe/ixgbe_fcoe.c @@ -25,7 +25,6 @@ *******************************************************************************/ - #include "ixgbe.h" #ifdef CONFIG_IXGBE_DCB #include "ixgbe_dcb_82599.h" @@ -165,20 +164,20 @@ int ixgbe_fcoe_ddp_get(struct net_device *netdev, u16 xid, adapter = netdev_priv(netdev); if (xid >= IXGBE_FCOE_DDP_MAX) { - DPRINTK(DRV, WARNING, "xid=0x%x out-of-range\n", xid); + e_warn("xid=0x%x out-of-range\n", xid); return 0; } fcoe = &adapter->fcoe; if (!fcoe->pool) { - DPRINTK(DRV, WARNING, "xid=0x%x no ddp pool for fcoe\n", xid); + e_warn("xid=0x%x no ddp pool for fcoe\n", xid); return 0; } ddp = &fcoe->ddp[xid]; if (ddp->sgl) { - DPRINTK(DRV, ERR, "xid 0x%x w/ non-null sgl=%p nents=%d\n", - xid, ddp->sgl, ddp->sgc); + e_err("xid 0x%x w/ non-null sgl=%p nents=%d\n", + xid, ddp->sgl, ddp->sgc); return 0; } ixgbe_fcoe_clear_ddp(ddp); @@ -186,14 +185,14 @@ int ixgbe_fcoe_ddp_get(struct net_device *netdev, u16 xid, /* setup dma from scsi command sgl */ dmacount = pci_map_sg(adapter->pdev, sgl, sgc, DMA_FROM_DEVICE); if (dmacount == 0) { - DPRINTK(DRV, ERR, "xid 0x%x DMA map error\n", xid); + e_err("xid 0x%x DMA map error\n", xid); return 0; } /* alloc the udl from our ddp pool */ ddp->udl = pci_pool_alloc(fcoe->pool, GFP_KERNEL, &ddp->udp); if (!ddp->udl) { - DPRINTK(DRV, ERR, "failed allocated ddp context\n"); + e_err("failed allocated ddp context\n"); goto out_noddp_unmap; } ddp->sgl = sgl; @@ -206,10 +205,9 @@ int ixgbe_fcoe_ddp_get(struct net_device *netdev, u16 xid, while (len) { /* max number of buffers allowed in one DDP context */ if (j >= IXGBE_BUFFCNT_MAX) { - netif_err(adapter, drv, adapter->netdev, - "xid=%x:%d,%d,%d:addr=%llx " - "not enough descriptors\n", - xid, i, j, dmacount, (u64)addr); + e_err("xid=%x:%d,%d,%d:addr=%llx " + "not enough descriptors\n", + xid, i, j, dmacount, (u64)addr); goto out_noddp_free; } @@ -387,8 +385,8 @@ int ixgbe_fso(struct ixgbe_adapter *adapter, struct fc_frame_header *fh; if (skb_is_gso(skb) && (skb_shinfo(skb)->gso_type != SKB_GSO_FCOE)) { - DPRINTK(DRV, ERR, "Wrong gso type %d:expecting SKB_GSO_FCOE\n", - skb_shinfo(skb)->gso_type); + e_err("Wrong gso type %d:expecting SKB_GSO_FCOE\n", + skb_shinfo(skb)->gso_type); return -EINVAL; } @@ -414,7 +412,7 @@ int ixgbe_fso(struct ixgbe_adapter *adapter, fcoe_sof_eof |= IXGBE_ADVTXD_FCOEF_SOF; break; default: - DPRINTK(DRV, WARNING, "unknown sof = 0x%x\n", sof); + e_warn("unknown sof = 0x%x\n", sof); return -EINVAL; } @@ -441,7 +439,7 @@ int ixgbe_fso(struct ixgbe_adapter *adapter, fcoe_sof_eof |= IXGBE_ADVTXD_FCOEF_EOF_A; break; default: - DPRINTK(DRV, WARNING, "unknown eof = 0x%x\n", eof); + e_warn("unknown eof = 0x%x\n", eof); return -EINVAL; } @@ -517,8 +515,7 @@ void ixgbe_configure_fcoe(struct ixgbe_adapter *adapter) adapter->pdev, IXGBE_FCPTR_MAX, IXGBE_FCPTR_ALIGN, PAGE_SIZE); if (!fcoe->pool) - DPRINTK(DRV, ERR, - "failed to allocated FCoE DDP pool\n"); + e_err("failed to allocated FCoE DDP pool\n"); spin_lock_init(&fcoe->lock); } @@ -614,7 +611,7 @@ int ixgbe_fcoe_enable(struct net_device *netdev) if (adapter->flags & IXGBE_FLAG_FCOE_ENABLED) goto out_enable; - DPRINTK(DRV, INFO, "Enabling FCoE offload features.\n"); + e_info("Enabling FCoE offload features.\n"); if (netif_running(netdev)) netdev->netdev_ops->ndo_stop(netdev); @@ -660,7 +657,7 @@ int ixgbe_fcoe_disable(struct net_device *netdev) if (!(adapter->flags & IXGBE_FLAG_FCOE_ENABLED)) goto out_disable; - DPRINTK(DRV, INFO, "Disabling FCoE offload features.\n"); + e_info("Disabling FCoE offload features.\n"); if (netif_running(netdev)) netdev->netdev_ops->ndo_stop(netdev); diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c index d571d10..04e64de 100644 --- a/drivers/net/ixgbe/ixgbe_main.c +++ b/drivers/net/ixgbe/ixgbe_main.c @@ -696,19 +696,19 @@ static inline bool ixgbe_check_tx_hang(struct ixgbe_adapter *adapter, /* detected Tx unit hang */ union ixgbe_adv_tx_desc *tx_desc; tx_desc = IXGBE_TX_DESC_ADV(*tx_ring, eop); - DPRINTK(DRV, ERR, "Detected Tx Unit Hang\n" - " Tx Queue <%d>\n" - " TDH, TDT <%x>, <%x>\n" - " next_to_use <%x>\n" - " next_to_clean <%x>\n" - "tx_buffer_info[next_to_clean]\n" - " time_stamp <%lx>\n" - " jiffies <%lx>\n", - tx_ring->queue_index, - IXGBE_READ_REG(hw, tx_ring->head), - IXGBE_READ_REG(hw, tx_ring->tail), - tx_ring->next_to_use, eop, - tx_ring->tx_buffer_info[eop].time_stamp, jiffies); + e_err("Detected Tx Unit Hang\n" + " Tx Queue <%d>\n" + " TDH, TDT <%x>, <%x>\n" + " next_to_use <%x>\n" + " next_to_clean <%x>\n" + "tx_buffer_info[next_to_clean]\n" + " time_stamp <%lx>\n" + " jiffies <%lx>\n", + tx_ring->queue_index, + IXGBE_READ_REG(hw, tx_ring->head), + IXGBE_READ_REG(hw, tx_ring->tail), + tx_ring->next_to_use, eop, + tx_ring->tx_buffer_info[eop].time_stamp, jiffies); return true; } @@ -812,9 +812,8 @@ static bool ixgbe_clean_tx_irq(struct ixgbe_q_vector *q_vector, if (adapter->detect_tx_hung) { if (ixgbe_check_tx_hang(adapter, tx_ring, i)) { /* schedule immediate reset if we believe we hung */ - DPRINTK(PROBE, INFO, - "tx hang %d detected, resetting adapter\n", - adapter->tx_timeout_count + 1); + e_info("tx hang %d detected, resetting adapter\n", + adapter->tx_timeout_count + 1); ixgbe_tx_timeout(adapter->netdev); } } @@ -1653,10 +1652,10 @@ static void ixgbe_check_overtemp_task(struct work_struct *work) return; break; } - DPRINTK(DRV, ERR, "Network adapter has been stopped because it " - "has over heated. Restart the computer. If the problem " - "persists, power off the system and replace the " - "adapter\n"); + e_crit("Network adapter has been stopped because it " + "has over heated. Restart the computer. If the problem " + "persists, power off the system and replace the " + "adapter\n"); /* write to clear the interrupt */ IXGBE_WRITE_REG(hw, IXGBE_EICR, IXGBE_EICR_GPI_SDP0); } @@ -1668,7 +1667,7 @@ static void ixgbe_check_fan_failure(struct ixgbe_adapter *adapter, u32 eicr) if ((adapter->flags & IXGBE_FLAG_FAN_FAIL_CAPABLE) && (eicr & IXGBE_EICR_GPI_SDP1)) { - DPRINTK(PROBE, CRIT, "Fan has stopped, replace the adapter\n"); + e_crit("Fan has stopped, replace the adapter\n"); /* write to clear the interrupt */ IXGBE_WRITE_REG(hw, IXGBE_EICR, IXGBE_EICR_GPI_SDP1); } @@ -2154,9 +2153,8 @@ static int ixgbe_request_msix_irqs(struct ixgbe_adapter *adapter) handler, 0, adapter->name[vector], adapter->q_vector[vector]); if (err) { - DPRINTK(PROBE, ERR, - "request_irq failed for MSIX interrupt " - "Error: %d\n", err); + e_err("request_irq failed for MSIX interrupt: " + "Error: %d\n", err); goto free_queue_irqs; } } @@ -2165,8 +2163,7 @@ static int ixgbe_request_msix_irqs(struct ixgbe_adapter *adapter) err = request_irq(adapter->msix_entries[vector].vector, ixgbe_msix_lsc, 0, adapter->name[vector], netdev); if (err) { - DPRINTK(PROBE, ERR, - "request_irq for msix_lsc failed: %d\n", err); + e_err("request_irq for msix_lsc failed: %d\n", err); goto free_queue_irqs; } @@ -2352,7 +2349,7 @@ static int ixgbe_request_irq(struct ixgbe_adapter *adapter) } if (err) - DPRINTK(PROBE, ERR, "request_irq failed, Error %d\n", err); + e_err("request_irq failed, Error %d\n", err); return err; } @@ -2423,7 +2420,7 @@ static void ixgbe_configure_msi_and_legacy(struct ixgbe_adapter *adapter) map_vector_to_rxq(adapter, 0, 0); map_vector_to_txq(adapter, 0, 0); - DPRINTK(HW, INFO, "Legacy interrupt IVAR setup done\n"); + e_info("Legacy interrupt IVAR setup done\n"); } /** @@ -3257,8 +3254,8 @@ static inline void ixgbe_rx_desc_queue_enable(struct ixgbe_adapter *adapter, msleep(1); } if (k >= IXGBE_MAX_RX_DESC_POLL) { - DPRINTK(DRV, ERR, "RXDCTL.ENABLE on Rx queue %d " - "not set within the polling period\n", rxr); + e_err("RXDCTL.ENABLE on Rx queue %d not set within " + "the polling period\n", rxr); } ixgbe_release_rx_desc(&adapter->hw, adapter->rx_ring[rxr], (adapter->rx_ring[rxr]->count - 1)); @@ -3387,8 +3384,7 @@ static int ixgbe_up_complete(struct ixgbe_adapter *adapter) } while (--wait_loop && !(txdctl & IXGBE_TXDCTL_ENABLE)); if (!wait_loop) - DPRINTK(DRV, ERR, "Could not enable " - "Tx Queue %d\n", j); + e_err("Could not enable Tx Queue %d\n", j); } } @@ -3436,8 +3432,7 @@ static int ixgbe_up_complete(struct ixgbe_adapter *adapter) if (adapter->flags & IXGBE_FLAG_FAN_FAIL_CAPABLE) { u32 esdp = IXGBE_READ_REG(hw, IXGBE_ESDP); if (esdp & IXGBE_ESDP_SDP1) - DPRINTK(DRV, CRIT, - "Fan has stopped, replace the adapter\n"); + e_crit("Fan has stopped, replace the adapter\n"); } /* @@ -3466,7 +3461,7 @@ static int ixgbe_up_complete(struct ixgbe_adapter *adapter) } else { err = ixgbe_non_sfp_link_config(hw); if (err) - DPRINTK(PROBE, ERR, "link_config FAILED %d\n", err); + e_err("link_config FAILED %d\n", err); } for (i = 0; i < adapter->num_tx_queues; i++) @@ -3527,19 +3522,19 @@ void ixgbe_reset(struct ixgbe_adapter *adapter) case IXGBE_ERR_SFP_NOT_PRESENT: break; case IXGBE_ERR_MASTER_REQUESTS_PENDING: - dev_err(&adapter->pdev->dev, "master disable timed out\n"); + e_dev_err("master disable timed out\n"); break; case IXGBE_ERR_EEPROM_VERSION: /* We are running on a pre-production device, log a warning */ - dev_warn(&adapter->pdev->dev, "This device is a pre-production " - "adapter/LOM. Please be aware there may be issues " - "associated with your hardware. If you are " - "experiencing problems please contact your Intel or " - "hardware representative who provided you with this " - "hardware.\n"); + e_dev_warn("This device is a pre-production adapter/LOM. " + "Please be aware there may be issuesassociated with " + "your hardware. If you are experiencing problems " + "please contact your Intel or hardware " + "representative who provided you with this " + "hardware.\n"); break; default: - dev_err(&adapter->pdev->dev, "Hardware Error: %d\n", err); + e_dev_err("Hardware Error: %d\n", err); } /* reprogram the RAR[0] in case user changed it. */ @@ -3920,12 +3915,12 @@ static inline bool ixgbe_set_fcoe_queues(struct ixgbe_adapter *adapter) adapter->num_tx_queues = 1; #ifdef CONFIG_IXGBE_DCB if (adapter->flags & IXGBE_FLAG_DCB_ENABLED) { - DPRINTK(PROBE, INFO, "FCoE enabled with DCB\n"); + e_info("FCoE enabled with DCB\n"); ixgbe_set_dcb_queues(adapter); } #endif if (adapter->flags & IXGBE_FLAG_RSS_ENABLED) { - DPRINTK(PROBE, INFO, "FCoE enabled with RSS\n"); + e_info("FCoE enabled with RSS\n"); if ((adapter->flags & IXGBE_FLAG_FDIR_HASH_CAPABLE) || (adapter->flags & IXGBE_FLAG_FDIR_PERFECT_CAPABLE)) ixgbe_set_fdir_queues(adapter); @@ -4038,7 +4033,8 @@ static void ixgbe_acquire_msix_vectors(struct ixgbe_adapter *adapter, * This just means we'll go with either a single MSI * vector or fall back to legacy interrupts. */ - DPRINTK(HW, DEBUG, "Unable to allocate MSI-X interrupts\n"); + netif_printk(adapter, hw, KERN_DEBUG, adapter->netdev, + "Unable to allocate MSI-X interrupts\n"); adapter->flags &= ~IXGBE_FLAG_MSIX_ENABLED; kfree(adapter->msix_entries); adapter->msix_entries = NULL; @@ -4435,8 +4431,9 @@ static int ixgbe_set_interrupt_capability(struct ixgbe_adapter *adapter) if (!err) { adapter->flags |= IXGBE_FLAG_MSI_ENABLED; } else { - DPRINTK(HW, DEBUG, "Unable to allocate MSI interrupt, " - "falling back to legacy. Error: %d\n", err); + netif_printk(adapter, hw, KERN_DEBUG, adapter->netdev, + "Unable to allocate MSI interrupt, " + "falling back to legacy. Error: %d\n", err); /* reset err */ err = 0; } @@ -4557,27 +4554,25 @@ int ixgbe_init_interrupt_scheme(struct ixgbe_adapter *adapter) err = ixgbe_set_interrupt_capability(adapter); if (err) { - DPRINTK(PROBE, ERR, "Unable to setup interrupt capabilities\n"); + e_dev_err("Unable to setup interrupt capabilities\n"); goto err_set_interrupt; } err = ixgbe_alloc_q_vectors(adapter); if (err) { - DPRINTK(PROBE, ERR, "Unable to allocate memory for queue " - "vectors\n"); + e_dev_err("Unable to allocate memory for queue vectors\n"); goto err_alloc_q_vectors; } err = ixgbe_alloc_queues(adapter); if (err) { - DPRINTK(PROBE, ERR, "Unable to allocate memory for queues\n"); + e_dev_err("Unable to allocate memory for queues\n"); goto err_alloc_queues; } - DPRINTK(DRV, INFO, "Multiqueue %s: Rx Queue count = %u, " - "Tx Queue count = %u\n", - (adapter->num_rx_queues > 1) ? "Enabled" : - "Disabled", adapter->num_rx_queues, adapter->num_tx_queues); + e_dev_info("Multiqueue %s: Rx Queue count = %u, Tx Queue count = %u\n", + (adapter->num_rx_queues > 1) ? "Enabled" : "Disabled", + adapter->num_rx_queues, adapter->num_tx_queues); set_bit(__IXGBE_DOWN, &adapter->state); @@ -4648,15 +4643,13 @@ static void ixgbe_sfp_task(struct work_struct *work) goto reschedule; ret = hw->phy.ops.reset(hw); if (ret == IXGBE_ERR_SFP_NOT_SUPPORTED) { - dev_err(&adapter->pdev->dev, "failed to initialize " - "because an unsupported SFP+ module type " - "was detected.\n" - "Reload the driver after installing a " - "supported module.\n"); + e_dev_err("failed to initialize because an unsupported " + "SFP+ module type was detected.\n"); + e_dev_err("Reload the driver after installing a " + "supported module.\n"); unregister_netdev(adapter->netdev); } else { - DPRINTK(PROBE, INFO, "detected SFP+: %d\n", - hw->phy.sfp_type); + e_info("detected SFP+: %d\n", hw->phy.sfp_type); } /* don't need this routine any more */ clear_bit(__IXGBE_SFP_MODULE_NOT_FOUND, &adapter->state); @@ -4783,7 +4776,7 @@ static int __devinit ixgbe_sw_init(struct ixgbe_adapter *adapter) /* initialize eeprom parameters */ if (ixgbe_init_eeprom_params_generic(hw)) { - dev_err(&pdev->dev, "EEPROM initialization failed\n"); + e_dev_err("EEPROM initialization failed\n"); return -EIO; } @@ -4836,8 +4829,7 @@ int ixgbe_setup_tx_resources(struct ixgbe_adapter *adapter, err: vfree(tx_ring->tx_buffer_info); tx_ring->tx_buffer_info = NULL; - DPRINTK(PROBE, ERR, "Unable to allocate memory for the transmit " - "descriptor ring\n"); + e_err("Unable to allocate memory for the Tx descriptor ring\n"); return -ENOMEM; } @@ -4859,7 +4851,7 @@ static int ixgbe_setup_all_tx_resources(struct ixgbe_adapter *adapter) err = ixgbe_setup_tx_resources(adapter, adapter->tx_ring[i]); if (!err) continue; - DPRINTK(PROBE, ERR, "Allocation for Tx Queue %u failed\n", i); + e_err("Allocation for Tx Queue %u failed\n", i); break; } @@ -4884,8 +4876,7 @@ int ixgbe_setup_rx_resources(struct ixgbe_adapter *adapter, if (!rx_ring->rx_buffer_info) rx_ring->rx_buffer_info = vmalloc(size); if (!rx_ring->rx_buffer_info) { - DPRINTK(PROBE, ERR, - "vmalloc allocation failed for the rx desc ring\n"); + e_err("vmalloc allocation failed for the Rx desc ring\n"); goto alloc_failed; } memset(rx_ring->rx_buffer_info, 0, size); @@ -4898,8 +4889,7 @@ int ixgbe_setup_rx_resources(struct ixgbe_adapter *adapter, &rx_ring->dma, GFP_KERNEL); if (!rx_ring->desc) { - DPRINTK(PROBE, ERR, - "Memory allocation failed for the rx desc ring\n"); + e_err("Memory allocation failed for the Rx desc ring\n"); vfree(rx_ring->rx_buffer_info); goto alloc_failed; } @@ -4932,7 +4922,7 @@ static int ixgbe_setup_all_rx_resources(struct ixgbe_adapter *adapter) err = ixgbe_setup_rx_resources(adapter, adapter->rx_ring[i]); if (!err) continue; - DPRINTK(PROBE, ERR, "Allocation for Rx Queue %u failed\n", i); + e_err("Allocation for Rx Queue %u failed\n", i); break; } @@ -5031,8 +5021,7 @@ static int ixgbe_change_mtu(struct net_device *netdev, int new_mtu) if ((new_mtu < 68) || (max_frame > IXGBE_MAX_JUMBO_FRAME_SIZE)) return -EINVAL; - DPRINTK(PROBE, INFO, "changing MTU from %d to %d\n", - netdev->mtu, new_mtu); + e_info("changing MTU from %d to %d\n", netdev->mtu, new_mtu); /* must set new MTU before calling down or up */ netdev->mtu = new_mtu; @@ -5145,8 +5134,7 @@ static int ixgbe_resume(struct pci_dev *pdev) err = pci_enable_device_mem(pdev); if (err) { - printk(KERN_ERR "ixgbe: Cannot enable PCI device from " - "suspend\n"); + e_dev_err("Cannot enable PCI device from suspend\n"); return err; } pci_set_master(pdev); @@ -5155,8 +5143,7 @@ static int ixgbe_resume(struct pci_dev *pdev) err = ixgbe_init_interrupt_scheme(adapter); if (err) { - printk(KERN_ERR "ixgbe: Cannot initialize interrupts for " - "device\n"); + e_dev_err("Cannot initialize interrupts for device\n"); return err; } @@ -5512,10 +5499,10 @@ static void ixgbe_sfp_config_module_task(struct work_struct *work) err = hw->phy.ops.identify_sfp(hw); if (err == IXGBE_ERR_SFP_NOT_SUPPORTED) { - dev_err(&adapter->pdev->dev, "failed to initialize because " - "an unsupported SFP+ module type was detected.\n" - "Reload the driver after installing a supported " - "module.\n"); + e_dev_err("failed to initialize because an unsupported SFP+ " + "module type was detected.\n"); + e_dev_err("Reload the driver after installing a supported " + "module.\n"); unregister_netdev(adapter->netdev); return; } @@ -5544,8 +5531,8 @@ static void ixgbe_fdir_reinit_task(struct work_struct *work) set_bit(__IXGBE_FDIR_INIT_DONE, &(adapter->tx_ring[i]->reinit_state)); } else { - DPRINTK(PROBE, ERR, "failed to finish FDIR re-initialization, " - "ignored adding FDIR ATR filters\n"); + e_err("failed to finish FDIR re-initialization, " + "ignored adding FDIR ATR filters\n"); } /* Done FDIR Re-initialization, enable transmits */ netif_tx_start_all_queues(adapter->netdev); @@ -5616,16 +5603,14 @@ static void ixgbe_watchdog_task(struct work_struct *work) flow_tx = !!(rmcs & IXGBE_RMCS_TFCE_802_3X); } - printk(KERN_INFO "ixgbe: %s NIC Link is Up %s, " - "Flow Control: %s\n", - netdev->name, + e_info("NIC Link is Up %s, Flow Control: %s\n", (link_speed == IXGBE_LINK_SPEED_10GB_FULL ? - "10 Gbps" : - (link_speed == IXGBE_LINK_SPEED_1GB_FULL ? - "1 Gbps" : "unknown speed")), + "10 Gbps" : + (link_speed == IXGBE_LINK_SPEED_1GB_FULL ? + "1 Gbps" : "unknown speed")), ((flow_rx && flow_tx) ? "RX/TX" : - (flow_rx ? "RX" : - (flow_tx ? "TX" : "None")))); + (flow_rx ? "RX" : + (flow_tx ? "TX" : "None")))); netif_carrier_on(netdev); } else { @@ -5636,8 +5621,7 @@ static void ixgbe_watchdog_task(struct work_struct *work) adapter->link_up = false; adapter->link_speed = 0; if (netif_carrier_ok(netdev)) { - printk(KERN_INFO "ixgbe: %s NIC Link is Down\n", - netdev->name); + e_info("NIC Link is Down\n"); netif_carrier_off(netdev); } } @@ -5813,9 +5797,8 @@ static bool ixgbe_tx_csum(struct ixgbe_adapter *adapter, break; default: if (unlikely(net_ratelimit())) { - DPRINTK(PROBE, WARNING, - "partial checksum but proto=%x!\n", - skb->protocol); + e_warn("partial checksum but " + "proto=%x!\n", skb->protocol); } break; } @@ -5926,7 +5909,7 @@ static int ixgbe_tx_map(struct ixgbe_adapter *adapter, return count; dma_error: - dev_err(&pdev->dev, "TX DMA map failed\n"); + e_dev_err("TX DMA map failed\n"); /* clear timestamp and dma mappings for failed tx_buffer_info map */ tx_buffer_info->dma = 0; @@ -6423,8 +6406,7 @@ static void __devinit ixgbe_probe_vf(struct ixgbe_adapter *adapter, adapter->flags |= IXGBE_FLAG_SRIOV_ENABLED; err = pci_enable_sriov(adapter->pdev, adapter->num_vfs); if (err) { - DPRINTK(PROBE, ERR, - "Failed to enable PCI sriov: %d\n", err); + e_err("Failed to enable PCI sriov: %d\n", err); goto err_novfs; } /* If call to enable VFs succeeded then allocate memory @@ -6448,9 +6430,8 @@ static void __devinit ixgbe_probe_vf(struct ixgbe_adapter *adapter, } /* Oh oh */ - DPRINTK(PROBE, ERR, - "Unable to allocate memory for VF " - "Data Storage - SRIOV disabled\n"); + e_err("Unable to allocate memory for VF Data Storage - SRIOV " + "disabled\n"); pci_disable_sriov(adapter->pdev); err_novfs: @@ -6498,8 +6479,8 @@ static int __devinit ixgbe_probe(struct pci_dev *pdev, err = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32)); if (err) { - dev_err(&pdev->dev, "No usable DMA " - "configuration, aborting\n"); + e_dev_err("No usable DMA configuration, " + "aborting\n"); goto err_dma; } } @@ -6509,8 +6490,7 @@ static int __devinit ixgbe_probe(struct pci_dev *pdev, err = pci_request_selected_regions(pdev, pci_select_bars(pdev, IORESOURCE_MEM), ixgbe_driver_name); if (err) { - dev_err(&pdev->dev, - "pci_request_selected_regions failed 0x%x\n", err); + e_dev_err("pci_request_selected_regions failed 0x%x\n", err); goto err_pci_reg; } @@ -6621,8 +6601,7 @@ static int __devinit ixgbe_probe(struct pci_dev *pdev, if (adapter->flags & IXGBE_FLAG_FAN_FAIL_CAPABLE) { u32 esdp = IXGBE_READ_REG(hw, IXGBE_ESDP); if (esdp & IXGBE_ESDP_SDP1) - DPRINTK(PROBE, CRIT, - "Fan has stopped, replace the adapter\n"); + e_crit("Fan has stopped, replace the adapter\n"); } /* reset_hw fills in the perm_addr as well */ @@ -6641,19 +6620,19 @@ static int __devinit ixgbe_probe(struct pci_dev *pdev, round_jiffies(jiffies + (2 * HZ))); err = 0; } else if (err == IXGBE_ERR_SFP_NOT_SUPPORTED) { - dev_err(&adapter->pdev->dev, "failed to initialize because " - "an unsupported SFP+ module type was detected.\n" - "Reload the driver after installing a supported " - "module.\n"); + e_dev_err("failed to initialize because an unsupported SFP+ " + "module type was detected.\n"); + e_dev_err("Reload the driver after installing a supported " + "module.\n"); goto err_sw_init; } else if (err) { - dev_err(&adapter->pdev->dev, "HW Init failed: %d\n", err); + e_dev_err("HW Init failed: %d\n", err); goto err_sw_init; } ixgbe_probe_vf(adapter, ii); - netdev->features = NETIF_F_SG | + netdev->features = NETIF_F_SG | NETIF_F_IP_CSUM | NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX | @@ -6700,7 +6679,7 @@ static int __devinit ixgbe_probe(struct pci_dev *pdev, /* make sure the EEPROM is good */ if (hw->eeprom.ops.validate_checksum(hw, NULL) < 0) { - dev_err(&pdev->dev, "The EEPROM Checksum Is Not Valid\n"); + e_dev_err("The EEPROM Checksum Is Not Valid\n"); err = -EIO; goto err_eeprom; } @@ -6709,7 +6688,7 @@ static int __devinit ixgbe_probe(struct pci_dev *pdev, memcpy(netdev->perm_addr, hw->mac.perm_addr, netdev->addr_len); if (ixgbe_validate_mac_addr(netdev->perm_addr)) { - dev_err(&pdev->dev, "invalid MAC address\n"); + e_dev_err("invalid MAC address\n"); err = -EIO; goto err_eeprom; } @@ -6744,7 +6723,7 @@ static int __devinit ixgbe_probe(struct pci_dev *pdev, hw->mac.ops.get_bus_info(hw); /* print bus type/speed/width info */ - dev_info(&pdev->dev, "(PCI Express:%s:%s) %pM\n", + e_dev_info("(PCI Express:%s:%s) %pM\n", ((hw->bus.speed == ixgbe_bus_speed_5000) ? "5.0Gb/s": (hw->bus.speed == ixgbe_bus_speed_2500) ? "2.5Gb/s":"Unknown"), ((hw->bus.width == ixgbe_bus_width_pcie_x8) ? "Width x8" : @@ -6754,20 +6733,20 @@ static int __devinit ixgbe_probe(struct pci_dev *pdev, netdev->dev_addr); ixgbe_read_pba_num_generic(hw, &part_num); if (ixgbe_is_sfp(hw) && hw->phy.sfp_type != ixgbe_sfp_type_not_present) - dev_info(&pdev->dev, "MAC: %d, PHY: %d, SFP+: %d, PBA No: %06x-%03x\n", - hw->mac.type, hw->phy.type, hw->phy.sfp_type, - (part_num >> 8), (part_num & 0xff)); + e_dev_info("MAC: %d, PHY: %d, SFP+: %d, " + "PBA No: %06x-%03x\n", + hw->mac.type, hw->phy.type, hw->phy.sfp_type, + (part_num >> 8), (part_num & 0xff)); else - dev_info(&pdev->dev, "MAC: %d, PHY: %d, PBA No: %06x-%03x\n", - hw->mac.type, hw->phy.type, - (part_num >> 8), (part_num & 0xff)); + e_dev_info("MAC: %d, PHY: %d, PBA No: %06x-%03x\n", + hw->mac.type, hw->phy.type, + (part_num >> 8), (part_num & 0xff)); if (hw->bus.width <= ixgbe_bus_width_pcie_x4) { - dev_warn(&pdev->dev, "PCI-Express bandwidth available for " - "this card is not sufficient for optimal " - "performance.\n"); - dev_warn(&pdev->dev, "For optimal performance a x8 " - "PCI-Express slot is required.\n"); + e_dev_warn("PCI-Express bandwidth available for this card is " + "not sufficient for optimal performance.\n"); + e_dev_warn("For optimal performance a x8 PCI-Express slot " + "is required.\n"); } /* save off EEPROM version number */ @@ -6778,12 +6757,12 @@ static int __devinit ixgbe_probe(struct pci_dev *pdev, if (err == IXGBE_ERR_EEPROM_VERSION) { /* We are running on a pre-production device, log a warning */ - dev_warn(&pdev->dev, "This device is a pre-production " - "adapter/LOM. Please be aware there may be issues " - "associated with your hardware. If you are " - "experiencing problems please contact your Intel or " - "hardware representative who provided you with this " - "hardware.\n"); + e_dev_warn("This device is a pre-production adapter/LOM. " + "Please be aware there may be issues associated " + "with your hardware. If you are experiencing " + "problems please contact your Intel or hardware " + "representative who provided you with this " + "hardware.\n"); } strcpy(netdev->name, "eth%d"); err = register_netdev(netdev); @@ -6806,8 +6785,7 @@ static int __devinit ixgbe_probe(struct pci_dev *pdev, } #endif if (adapter->flags & IXGBE_FLAG_SRIOV_ENABLED) { - DPRINTK(PROBE, INFO, "IOV is enabled with %d VFs\n", - adapter->num_vfs); + e_info("IOV is enabled with %d VFs\n", adapter->num_vfs); for (i = 0; i < adapter->num_vfs; i++) ixgbe_vf_configuration(pdev, (i | 0x10000000)); } @@ -6815,7 +6793,7 @@ static int __devinit ixgbe_probe(struct pci_dev *pdev, /* add san mac addr to netdev */ ixgbe_add_sanmac_netdev(netdev); - dev_info(&pdev->dev, "Intel(R) 10 Gigabit Network Connection\n"); + e_dev_info("Intel(R) 10 Gigabit Network Connection\n"); cards_found++; return 0; @@ -6905,7 +6883,7 @@ static void __devexit ixgbe_remove(struct pci_dev *pdev) pci_release_selected_regions(pdev, pci_select_bars(pdev, IORESOURCE_MEM)); - DPRINTK(PROBE, INFO, "complete\n"); + e_dev_info("complete\n"); free_netdev(netdev); @@ -6955,8 +6933,7 @@ static pci_ers_result_t ixgbe_io_slot_reset(struct pci_dev *pdev) int err; if (pci_enable_device_mem(pdev)) { - DPRINTK(PROBE, ERR, - "Cannot re-enable PCI device after reset.\n"); + e_err("Cannot re-enable PCI device after reset.\n"); result = PCI_ERS_RESULT_DISCONNECT; } else { pci_set_master(pdev); @@ -6972,8 +6949,8 @@ static pci_ers_result_t ixgbe_io_slot_reset(struct pci_dev *pdev) err = pci_cleanup_aer_uncorrect_error_status(pdev); if (err) { - dev_err(&pdev->dev, - "pci_cleanup_aer_uncorrect_error_status failed 0x%0x\n", err); + e_dev_err("pci_cleanup_aer_uncorrect_error_status " + "failed 0x%0x\n", err); /* non-fatal, continue */ } @@ -6994,7 +6971,7 @@ static void ixgbe_io_resume(struct pci_dev *pdev) if (netif_running(netdev)) { if (ixgbe_up(adapter)) { - DPRINTK(PROBE, INFO, "ixgbe_up failed after reset\n"); + e_info("ixgbe_up failed after reset\n"); return; } } @@ -7030,10 +7007,9 @@ static struct pci_driver ixgbe_driver = { static int __init ixgbe_init_module(void) { int ret; - printk(KERN_INFO "%s: %s - version %s\n", ixgbe_driver_name, - ixgbe_driver_string, ixgbe_driver_version); - - printk(KERN_INFO "%s: %s\n", ixgbe_driver_name, ixgbe_copyright); + pr_info("%s - version %s\n", ixgbe_driver_string, + ixgbe_driver_version); + pr_info("%s\n", ixgbe_copyright); #ifdef CONFIG_IXGBE_DCA dca_register_notify(&dca_notifier); @@ -7072,18 +7048,17 @@ static int ixgbe_notify_dca(struct notifier_block *nb, unsigned long event, } #endif /* CONFIG_IXGBE_DCA */ -#ifdef DEBUG + /** - * ixgbe_get_hw_dev_name - return device name string + * ixgbe_get_hw_dev return device * used by hardware layer to print debugging information **/ -char *ixgbe_get_hw_dev_name(struct ixgbe_hw *hw) +struct net_device *ixgbe_get_hw_dev(struct ixgbe_hw *hw) { struct ixgbe_adapter *adapter = hw->back; - return adapter->netdev->name; + return adapter->netdev; } -#endif module_exit(ixgbe_exit_module); /* ixgbe_main.c */ diff --git a/drivers/net/ixgbe/ixgbe_sriov.c b/drivers/net/ixgbe/ixgbe_sriov.c index f6cee94..66f6e62 100644 --- a/drivers/net/ixgbe/ixgbe_sriov.c +++ b/drivers/net/ixgbe/ixgbe_sriov.c @@ -25,7 +25,6 @@ *******************************************************************************/ - #include #include #include @@ -174,7 +173,7 @@ int ixgbe_set_vf_mac(struct ixgbe_adapter *adapter, adapter->vfinfo[vf].rar = hw->mac.ops.set_rar(hw, vf + 1, mac_addr, vf, IXGBE_RAH_AV); if (adapter->vfinfo[vf].rar < 0) { - DPRINTK(DRV, ERR, "Could not set MAC Filter for VF %d\n", vf); + e_err("Could not set MAC Filter for VF %d\n", vf); return -1; } @@ -194,11 +193,7 @@ int ixgbe_vf_configuration(struct pci_dev *pdev, unsigned int event_mask) if (enable) { random_ether_addr(vf_mac_addr); - DPRINTK(PROBE, INFO, "IOV: VF %d is enabled " - "mac %02X:%02X:%02X:%02X:%02X:%02X\n", - vfn, - vf_mac_addr[0], vf_mac_addr[1], vf_mac_addr[2], - vf_mac_addr[3], vf_mac_addr[4], vf_mac_addr[5]); + e_info("IOV: VF %d is enabled MAC %pM\n", vfn, vf_mac_addr); /* * Store away the VF "permananet" MAC address, it will ask * for it later. @@ -243,7 +238,7 @@ static int ixgbe_rcv_msg_from_vf(struct ixgbe_adapter *adapter, u32 vf) retval = ixgbe_read_mbx(hw, msgbuf, mbx_size, vf); if (retval) - printk(KERN_ERR "Error receiving message from VF\n"); + pr_err("Error receiving message from VF\n"); /* this is a message we already processed, do nothing */ if (msgbuf[0] & (IXGBE_VT_MSGTYPE_ACK | IXGBE_VT_MSGTYPE_NACK)) @@ -257,7 +252,7 @@ static int ixgbe_rcv_msg_from_vf(struct ixgbe_adapter *adapter, u32 vf) if (msgbuf[0] == IXGBE_VF_RESET) { unsigned char *vf_mac = adapter->vfinfo[vf].vf_mac_addresses; u8 *addr = (u8 *)(&msgbuf[1]); - DPRINTK(PROBE, INFO, "VF Reset msg received from vf %d\n", vf); + e_info("VF Reset msg received from vf %d\n", vf); adapter->vfinfo[vf].clear_to_send = false; ixgbe_vf_reset_msg(adapter, vf); adapter->vfinfo[vf].clear_to_send = true; @@ -310,7 +305,7 @@ static int ixgbe_rcv_msg_from_vf(struct ixgbe_adapter *adapter, u32 vf) retval = ixgbe_set_vf_vlan(adapter, add, vid, vf); break; default: - DPRINTK(DRV, ERR, "Unhandled Msg %8.8x\n", msgbuf[0]); + e_err("Unhandled Msg %8.8x\n", msgbuf[0]); retval = IXGBE_ERR_MBX; break; } -- cgit v0.10.2