From ac28b9f8cd66d6bc54f8063df59e99abd62173a4 Mon Sep 17 00:00:00 2001 From: David Daney Date: Wed, 27 Jun 2012 07:33:35 +0000 Subject: netdev/phy: Handle IEEE802.3 clause 45 Ethernet PHYs The IEEE802.3 clause 45 MDIO bus protocol allows for directly addressing PHY registers using a 21 bit address, and is used by many 10G Ethernet PHYS. Already existing is the ability of MDIO bus drivers to use clause 45, with the MII_ADDR_C45 flag. Here we add struct phy_c45_device_ids to hold the device identifier registers present in clause 45. struct phy_device gets a couple of new fields: c45_ids to hold the identifiers and is_c45 to signal that it is clause 45. get_phy_device() gets a new parameter is_c45 to indicate that the PHY device should use the clause 45 protocol, and its callers are adjusted to pass false. The follow-on patch to of_mdio.c will pass true where appropriate. EXPORT phy_device_create() so that the follow-on patch to of_mdio.c can use it to create phy devices for PHYs, that have non-standard device identifier registers, based on the device tree bindings. Signed-off-by: David Daney Signed-off-by: David S. Miller diff --git a/drivers/net/phy/mdio_bus.c b/drivers/net/phy/mdio_bus.c index 31470b0..2cee6d2 100644 --- a/drivers/net/phy/mdio_bus.c +++ b/drivers/net/phy/mdio_bus.c @@ -232,7 +232,7 @@ struct phy_device *mdiobus_scan(struct mii_bus *bus, int addr) struct phy_device *phydev; int err; - phydev = get_phy_device(bus, addr); + phydev = get_phy_device(bus, addr, false); if (IS_ERR(phydev) || phydev == NULL) return phydev; diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c index 18ab0da..ef4cdee 100644 --- a/drivers/net/phy/phy_device.c +++ b/drivers/net/phy/phy_device.c @@ -152,8 +152,8 @@ int phy_scan_fixups(struct phy_device *phydev) } EXPORT_SYMBOL(phy_scan_fixups); -static struct phy_device* phy_device_create(struct mii_bus *bus, - int addr, int phy_id) +struct phy_device *phy_device_create(struct mii_bus *bus, int addr, int phy_id, + bool is_c45, struct phy_c45_device_ids *c45_ids) { struct phy_device *dev; @@ -174,8 +174,11 @@ static struct phy_device* phy_device_create(struct mii_bus *bus, dev->autoneg = AUTONEG_ENABLE; + dev->is_c45 = is_c45; dev->addr = addr; dev->phy_id = phy_id; + if (c45_ids) + dev->c45_ids = *c45_ids; dev->bus = bus; dev->dev.parent = bus->parent; dev->dev.bus = &mdio_bus_type; @@ -200,20 +203,99 @@ static struct phy_device* phy_device_create(struct mii_bus *bus, return dev; } +EXPORT_SYMBOL(phy_device_create); + +/** + * get_phy_c45_ids - reads the specified addr for its 802.3-c45 IDs. + * @bus: the target MII bus + * @addr: PHY address on the MII bus + * @phy_id: where to store the ID retrieved. + * @c45_ids: where to store the c45 ID information. + * + * If the PHY devices-in-package appears to be valid, it and the + * corresponding identifiers are stored in @c45_ids, zero is stored + * in @phy_id. Otherwise 0xffffffff is stored in @phy_id. Returns + * zero on success. + * + */ +static int get_phy_c45_ids(struct mii_bus *bus, int addr, u32 *phy_id, + struct phy_c45_device_ids *c45_ids) { + int phy_reg; + int i, reg_addr; + const int num_ids = ARRAY_SIZE(c45_ids->device_ids); + + /* Find first non-zero Devices In package. Device + * zero is reserved, so don't probe it. + */ + for (i = 1; + i < num_ids && c45_ids->devices_in_package == 0; + i++) { + reg_addr = MII_ADDR_C45 | i << 16 | 6; + phy_reg = mdiobus_read(bus, addr, reg_addr); + if (phy_reg < 0) + return -EIO; + c45_ids->devices_in_package = (phy_reg & 0xffff) << 16; + + reg_addr = MII_ADDR_C45 | i << 16 | 5; + phy_reg = mdiobus_read(bus, addr, reg_addr); + if (phy_reg < 0) + return -EIO; + c45_ids->devices_in_package |= (phy_reg & 0xffff); + + /* If mostly Fs, there is no device there, + * let's get out of here. + */ + if ((c45_ids->devices_in_package & 0x1fffffff) == 0x1fffffff) { + *phy_id = 0xffffffff; + return 0; + } + } + + /* Now probe Device Identifiers for each device present. */ + for (i = 1; i < num_ids; i++) { + if (!(c45_ids->devices_in_package & (1 << i))) + continue; + + reg_addr = MII_ADDR_C45 | i << 16 | MII_PHYSID1; + phy_reg = mdiobus_read(bus, addr, reg_addr); + if (phy_reg < 0) + return -EIO; + c45_ids->device_ids[i] = (phy_reg & 0xffff) << 16; + + reg_addr = MII_ADDR_C45 | i << 16 | MII_PHYSID2; + phy_reg = mdiobus_read(bus, addr, reg_addr); + if (phy_reg < 0) + return -EIO; + c45_ids->device_ids[i] |= (phy_reg & 0xffff); + } + *phy_id = 0; + return 0; +} /** * get_phy_id - reads the specified addr for its ID. * @bus: the target MII bus * @addr: PHY address on the MII bus * @phy_id: where to store the ID retrieved. + * @is_c45: If true the PHY uses the 802.3 clause 45 protocol + * @c45_ids: where to store the c45 ID information. + * + * Description: In the case of a 802.3-c22 PHY, reads the ID registers + * of the PHY at @addr on the @bus, stores it in @phy_id and returns + * zero on success. + * + * In the case of a 802.3-c45 PHY, get_phy_c45_ids() is invoked, and + * its return value is in turn returned. * - * Description: Reads the ID registers of the PHY at @addr on the - * @bus, stores it in @phy_id and returns zero on success. */ -static int get_phy_id(struct mii_bus *bus, int addr, u32 *phy_id) +static int get_phy_id(struct mii_bus *bus, int addr, u32 *phy_id, + bool is_c45, struct phy_c45_device_ids *c45_ids) { int phy_reg; + if (is_c45) + return get_phy_c45_ids(bus, addr, phy_id, c45_ids); + /* Grab the bits from PHYIR1, and put them * in the upper half */ phy_reg = mdiobus_read(bus, addr, MII_PHYSID1); @@ -238,17 +320,19 @@ static int get_phy_id(struct mii_bus *bus, int addr, u32 *phy_id) * get_phy_device - reads the specified PHY device and returns its @phy_device struct * @bus: the target MII bus * @addr: PHY address on the MII bus + * @is_c45: If true the PHY uses the 802.3 clause 45 protocol * * Description: Reads the ID registers of the PHY at @addr on the * @bus, then allocates and returns the phy_device to represent it. */ -struct phy_device * get_phy_device(struct mii_bus *bus, int addr) +struct phy_device *get_phy_device(struct mii_bus *bus, int addr, bool is_c45) { struct phy_device *dev = NULL; u32 phy_id; + struct phy_c45_device_ids c45_ids = {0}; int r; - r = get_phy_id(bus, addr, &phy_id); + r = get_phy_id(bus, addr, &phy_id, is_c45, &c45_ids); if (r) return ERR_PTR(r); @@ -256,7 +340,7 @@ struct phy_device * get_phy_device(struct mii_bus *bus, int addr) if ((phy_id & 0x1fffffff) == 0x1fffffff) return NULL; - dev = phy_device_create(bus, addr, phy_id); + dev = phy_device_create(bus, addr, phy_id, is_c45, &c45_ids); return dev; } @@ -449,6 +533,11 @@ static int phy_attach_direct(struct net_device *dev, struct phy_device *phydev, /* Assume that if there is no driver, that it doesn't * exist, and we should use the genphy driver. */ if (NULL == d->driver) { + if (phydev->is_c45) { + pr_err("No driver for phy %x\n", phydev->phy_id); + return -ENODEV; + } + d->driver = &genphy_driver.driver; err = d->driver->probe(d); diff --git a/drivers/of/of_mdio.c b/drivers/of/of_mdio.c index 2574abd..6c24cad 100644 --- a/drivers/of/of_mdio.c +++ b/drivers/of/of_mdio.c @@ -79,7 +79,7 @@ int of_mdiobus_register(struct mii_bus *mdio, struct device_node *np) mdio->irq[addr] = PHY_POLL; } - phy = get_phy_device(mdio, addr); + phy = get_phy_device(mdio, addr, false); if (!phy || IS_ERR(phy)) { dev_err(&mdio->dev, "error probing PHY at address %i\n", addr); diff --git a/include/linux/phy.h b/include/linux/phy.h index c291cae..597d05d 100644 --- a/include/linux/phy.h +++ b/include/linux/phy.h @@ -243,6 +243,15 @@ enum phy_state { PHY_RESUMING }; +/** + * struct phy_c45_device_ids - 802.3-c45 Device Identifiers + * @devices_in_package: Bit vector of devices present. + * @device_ids: The device identifer for each present device. + */ +struct phy_c45_device_ids { + u32 devices_in_package; + u32 device_ids[8]; +}; /* phy_device: An instance of a PHY * @@ -250,6 +259,8 @@ enum phy_state { * bus: Pointer to the bus this PHY is on * dev: driver model device structure for this PHY * phy_id: UID for this device found during discovery + * c45_ids: 802.3-c45 Device Identifers if is_c45. + * is_c45: Set to true if this phy uses clause 45 addressing. * state: state of the PHY for management purposes * dev_flags: Device-specific flags used by the PHY driver. * addr: Bus address of PHY @@ -285,6 +296,9 @@ struct phy_device { u32 phy_id; + struct phy_c45_device_ids c45_ids; + bool is_c45; + enum phy_state state; u32 dev_flags; @@ -480,7 +494,9 @@ static inline int phy_write(struct phy_device *phydev, u32 regnum, u16 val) return mdiobus_write(phydev->bus, phydev->addr, regnum, val); } -struct phy_device* get_phy_device(struct mii_bus *bus, int addr); +struct phy_device *phy_device_create(struct mii_bus *bus, int addr, int phy_id, + bool is_c45, struct phy_c45_device_ids *c45_ids); +struct phy_device *get_phy_device(struct mii_bus *bus, int addr, bool is_c45); int phy_device_register(struct phy_device *phy); int phy_init_hw(struct phy_device *phydev); struct phy_device * phy_attach(struct net_device *dev, -- cgit v0.10.2