From 192b775cc811b0e9e0d174ffdd5a814794392482 Mon Sep 17 00:00:00 2001
From: Maxime Austruy <maxime@tralhalla.org>
Date: Mon, 29 Jan 2007 00:59:51 +0000
Subject: [PATCH] zd1211rw: fix potential leak in usb_init

usb_init should call destroy_workqueue when usb_register fails.

Signed-off-by: Maxime Austruy <maxime@tralhalla.org>
Signed-off-by: Ulrich Kunitz <kune@deine-taler.de>
Signed-off-by: Daniel Drake <dsd@gentoo.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

diff --git a/drivers/net/wireless/zd1211rw/zd_usb.c b/drivers/net/wireless/zd1211rw/zd_usb.c
index 605e96e..2468ad6 100644
--- a/drivers/net/wireless/zd1211rw/zd_usb.c
+++ b/drivers/net/wireless/zd1211rw/zd_usb.c
@@ -1128,6 +1128,7 @@ static int __init usb_init(void)
 
 	r = usb_register(&driver);
 	if (r) {
+		destroy_workqueue(zd_workqueue);
 		printk(KERN_ERR "%s usb_register() failed. Error number %d\n",
 		       driver.name, r);
 		return r;
-- 
cgit v0.10.2


From 471030390d4561f430c9aea36e72d96bd2ee48f1 Mon Sep 17 00:00:00 2001
From: Larry Finger <Larry.Finger@lwfinger.net>
Date: Sun, 21 Jan 2007 22:27:35 -0600
Subject: [PATCH] bcm43xx: Fix problem with >1 GB RAM

Some versions of the bcm43xx chips only support 30-bit DMA, which means
that the descriptors and buffers must be in the first 1 GB of RAM. On
the i386 and x86_64 architectures with more than 1 GB RAM, an incorrect
assignment may occur. This patch ensures that the various DMA addresses
are within the capability of the chip. Testing has been limited to x86_64
as no one has an i386 system with more than 1 GB RAM.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

diff --git a/drivers/net/wireless/bcm43xx/bcm43xx.h b/drivers/net/wireless/bcm43xx/bcm43xx.h
index 8286678..4168b1a 100644
--- a/drivers/net/wireless/bcm43xx/bcm43xx.h
+++ b/drivers/net/wireless/bcm43xx/bcm43xx.h
@@ -766,6 +766,7 @@ struct bcm43xx_private {
 	 * This is currently always BCM43xx_BUSTYPE_PCI
 	 */
 	u8 bustype;
+	u64 dma_mask;
 
 	u16 board_vendor;
 	u16 board_type;
diff --git a/drivers/net/wireless/bcm43xx/bcm43xx_dma.c b/drivers/net/wireless/bcm43xx/bcm43xx_dma.c
index 978ed09..6e0dc76 100644
--- a/drivers/net/wireless/bcm43xx/bcm43xx_dma.c
+++ b/drivers/net/wireless/bcm43xx/bcm43xx_dma.c
@@ -145,16 +145,14 @@ dma_addr_t map_descbuffer(struct bcm43xx_dmaring *ring,
 			  int tx)
 {
 	dma_addr_t dmaaddr;
+	int direction = PCI_DMA_FROMDEVICE;
 
-	if (tx) {
-		dmaaddr = dma_map_single(&ring->bcm->pci_dev->dev,
-					 buf, len,
-					 DMA_TO_DEVICE);
-	} else {
-		dmaaddr = dma_map_single(&ring->bcm->pci_dev->dev,
+	if (tx)
+		direction = PCI_DMA_TODEVICE;
+
+	dmaaddr = pci_map_single(ring->bcm->pci_dev,
 					 buf, len,
-					 DMA_FROM_DEVICE);
-	}
+					 direction);
 
 	return dmaaddr;
 }
@@ -166,13 +164,13 @@ void unmap_descbuffer(struct bcm43xx_dmaring *ring,
 		      int tx)
 {
 	if (tx) {
-		dma_unmap_single(&ring->bcm->pci_dev->dev,
+		pci_unmap_single(ring->bcm->pci_dev,
 				 addr, len,
-				 DMA_TO_DEVICE);
+				 PCI_DMA_TODEVICE);
 	} else {
-		dma_unmap_single(&ring->bcm->pci_dev->dev,
+		pci_unmap_single(ring->bcm->pci_dev,
 				 addr, len,
-				 DMA_FROM_DEVICE);
+				 PCI_DMA_FROMDEVICE);
 	}
 }
 
@@ -183,8 +181,8 @@ void sync_descbuffer_for_cpu(struct bcm43xx_dmaring *ring,
 {
 	assert(!ring->tx);
 
-	dma_sync_single_for_cpu(&ring->bcm->pci_dev->dev,
-				addr, len, DMA_FROM_DEVICE);
+	pci_dma_sync_single_for_cpu(ring->bcm->pci_dev,
+				    addr, len, PCI_DMA_FROMDEVICE);
 }
 
 static inline
@@ -194,8 +192,8 @@ void sync_descbuffer_for_device(struct bcm43xx_dmaring *ring,
 {
 	assert(!ring->tx);
 
-	dma_sync_single_for_device(&ring->bcm->pci_dev->dev,
-				   addr, len, DMA_FROM_DEVICE);
+	pci_dma_sync_single_for_cpu(ring->bcm->pci_dev,
+				    addr, len, PCI_DMA_TODEVICE);
 }
 
 /* Unmap and free a descriptor buffer. */
@@ -214,17 +212,53 @@ void free_descriptor_buffer(struct bcm43xx_dmaring *ring,
 
 static int alloc_ringmemory(struct bcm43xx_dmaring *ring)
 {
-	struct device *dev = &(ring->bcm->pci_dev->dev);
-
-	ring->descbase = dma_alloc_coherent(dev, BCM43xx_DMA_RINGMEMSIZE,
-					    &(ring->dmabase), GFP_KERNEL);
+	ring->descbase = pci_alloc_consistent(ring->bcm->pci_dev, BCM43xx_DMA_RINGMEMSIZE,
+					    &(ring->dmabase));
 	if (!ring->descbase) {
-		printk(KERN_ERR PFX "DMA ringmemory allocation failed\n");
-		return -ENOMEM;
+		/* Allocation may have failed due to pci_alloc_consistent
+		   insisting on use of GFP_DMA, which is more restrictive
+		   than necessary...  */
+		struct dma_desc *rx_ring;
+		dma_addr_t rx_ring_dma;
+
+		rx_ring = kzalloc(BCM43xx_DMA_RINGMEMSIZE, GFP_KERNEL);
+		if (!rx_ring)
+			goto out_err;
+
+		rx_ring_dma = pci_map_single(ring->bcm->pci_dev, rx_ring,
+					     BCM43xx_DMA_RINGMEMSIZE,
+					     PCI_DMA_BIDIRECTIONAL);
+
+		if (pci_dma_mapping_error(rx_ring_dma) ||
+		    rx_ring_dma + BCM43xx_DMA_RINGMEMSIZE > ring->bcm->dma_mask) {
+			/* Sigh... */
+			if (!pci_dma_mapping_error(rx_ring_dma))
+				pci_unmap_single(ring->bcm->pci_dev,
+						 rx_ring_dma, BCM43xx_DMA_RINGMEMSIZE,
+						 PCI_DMA_BIDIRECTIONAL);
+			rx_ring_dma = pci_map_single(ring->bcm->pci_dev,
+						 rx_ring, BCM43xx_DMA_RINGMEMSIZE,
+						 PCI_DMA_BIDIRECTIONAL);
+			if (pci_dma_mapping_error(rx_ring_dma) ||
+			    rx_ring_dma + BCM43xx_DMA_RINGMEMSIZE > ring->bcm->dma_mask) {
+				assert(0);
+				if (!pci_dma_mapping_error(rx_ring_dma))
+					pci_unmap_single(ring->bcm->pci_dev,
+							 rx_ring_dma, BCM43xx_DMA_RINGMEMSIZE,
+							 PCI_DMA_BIDIRECTIONAL);
+				goto out_err;
+			}
+                }
+
+                ring->descbase = rx_ring;
+                ring->dmabase = rx_ring_dma;
 	}
 	memset(ring->descbase, 0, BCM43xx_DMA_RINGMEMSIZE);
 
 	return 0;
+out_err:
+	printk(KERN_ERR PFX "DMA ringmemory allocation failed\n");
+	return -ENOMEM;
 }
 
 static void free_ringmemory(struct bcm43xx_dmaring *ring)
@@ -407,6 +441,29 @@ static int setup_rx_descbuffer(struct bcm43xx_dmaring *ring,
 	if (unlikely(!skb))
 		return -ENOMEM;
 	dmaaddr = map_descbuffer(ring, skb->data, ring->rx_buffersize, 0);
+	/* This hardware bug work-around adapted from the b44 driver.
+	   The chip may be unable to do PCI DMA to/from anything above 1GB */
+	if (pci_dma_mapping_error(dmaaddr) ||
+	    dmaaddr + ring->rx_buffersize > ring->bcm->dma_mask) {
+		/* This one has 30-bit addressing... */
+		if (!pci_dma_mapping_error(dmaaddr))
+			pci_unmap_single(ring->bcm->pci_dev,
+					 dmaaddr, ring->rx_buffersize,
+					 PCI_DMA_FROMDEVICE);
+		dev_kfree_skb_any(skb);
+		skb = __dev_alloc_skb(ring->rx_buffersize,GFP_DMA);
+		if (skb == NULL)
+			return -ENOMEM;
+		dmaaddr = pci_map_single(ring->bcm->pci_dev,
+					 skb->data, ring->rx_buffersize,
+					 PCI_DMA_FROMDEVICE);
+		if (pci_dma_mapping_error(dmaaddr) ||
+		    dmaaddr + ring->rx_buffersize > ring->bcm->dma_mask) {
+			assert(0);
+			dev_kfree_skb_any(skb);
+			return -ENOMEM;
+		}
+	}
 	meta->skb = skb;
 	meta->dmaaddr = dmaaddr;
 	skb->dev = ring->bcm->net_dev;
@@ -636,8 +693,10 @@ struct bcm43xx_dmaring * bcm43xx_setup_dmaring(struct bcm43xx_private *bcm,
 	err = dmacontroller_setup(ring);
 	if (err)
 		goto err_free_ringmemory;
+	return ring;
 
 out:
+	printk(KERN_ERR PFX "Error in bcm43xx_setup_dmaring\n");
 	return ring;
 
 err_free_ringmemory:
@@ -705,30 +764,16 @@ int bcm43xx_dma_init(struct bcm43xx_private *bcm)
 	struct bcm43xx_dmaring *ring;
 	int err = -ENOMEM;
 	int dma64 = 0;
-	u64 mask = bcm43xx_get_supported_dma_mask(bcm);
-	int nobits;
 
-	if (mask == DMA_64BIT_MASK) {
+	bcm->dma_mask = bcm43xx_get_supported_dma_mask(bcm);
+	if (bcm->dma_mask == DMA_64BIT_MASK)
 		dma64 = 1;
-		nobits = 64;
-	} else if (mask == DMA_32BIT_MASK)
-		nobits = 32;
-	else
-		nobits = 30;
-	err = pci_set_dma_mask(bcm->pci_dev, mask);
-	err |= pci_set_consistent_dma_mask(bcm->pci_dev, mask);
-	if (err) {
-#ifdef CONFIG_BCM43XX_PIO
-		printk(KERN_WARNING PFX "DMA not supported on this device."
-					" Falling back to PIO.\n");
-		bcm->__using_pio = 1;
-		return -ENOSYS;
-#else
-		printk(KERN_ERR PFX "FATAL: DMA not supported and PIO not configured. "
-				    "Please recompile the driver with PIO support.\n");
-		return -ENODEV;
-#endif /* CONFIG_BCM43XX_PIO */
-	}
+	err = pci_set_dma_mask(bcm->pci_dev, bcm->dma_mask);
+	if (err)
+		goto no_dma;
+	err = pci_set_consistent_dma_mask(bcm->pci_dev, bcm->dma_mask);
+	if (err)
+		goto no_dma;
 
 	/* setup TX DMA channels. */
 	ring = bcm43xx_setup_dmaring(bcm, 0, 1, dma64);
@@ -774,7 +819,9 @@ int bcm43xx_dma_init(struct bcm43xx_private *bcm)
 		dma->rx_ring3 = ring;
 	}
 
-	dprintk(KERN_INFO PFX "%d-bit DMA initialized\n", nobits);
+	dprintk(KERN_INFO PFX "%d-bit DMA initialized\n",
+		(bcm->dma_mask == DMA_64BIT_MASK) ? 64 :
+		(bcm->dma_mask == DMA_32BIT_MASK) ? 32 : 30);
 	err = 0;
 out:
 	return err;
@@ -800,7 +847,17 @@ err_destroy_tx1:
 err_destroy_tx0:
 	bcm43xx_destroy_dmaring(dma->tx_ring0);
 	dma->tx_ring0 = NULL;
-	goto out;
+no_dma:
+#ifdef CONFIG_BCM43XX_PIO
+	printk(KERN_WARNING PFX "DMA not supported on this device."
+				" Falling back to PIO.\n");
+	bcm->__using_pio = 1;
+	return -ENOSYS;
+#else
+	printk(KERN_ERR PFX "FATAL: DMA not supported and PIO not configured. "
+			    "Please recompile the driver with PIO support.\n");
+	return -ENODEV;
+#endif /* CONFIG_BCM43XX_PIO */
 }
 
 /* Generate a cookie for the TX header. */
@@ -905,6 +962,7 @@ static void dma_tx_fragment(struct bcm43xx_dmaring *ring,
 	struct bcm43xx_dmadesc_generic *desc;
 	struct bcm43xx_dmadesc_meta *meta;
 	dma_addr_t dmaaddr;
+	struct sk_buff *bounce_skb;
 
 	assert(skb_shinfo(skb)->nr_frags == 0);
 
@@ -924,9 +982,28 @@ static void dma_tx_fragment(struct bcm43xx_dmaring *ring,
 			       skb->len - sizeof(struct bcm43xx_txhdr),
 			       (cur_frag == 0),
 			       generate_cookie(ring, slot));
+	dmaaddr = map_descbuffer(ring, skb->data, skb->len, 1);
+	if (dma_mapping_error(dmaaddr) || dmaaddr + skb->len > ring->bcm->dma_mask) {
+		/* chip cannot handle DMA to/from > 1GB, use bounce buffer (copied from b44 driver) */
+		if (!dma_mapping_error(dmaaddr))
+			unmap_descbuffer(ring, dmaaddr, skb->len, 1);
+		bounce_skb = __dev_alloc_skb(skb->len, GFP_ATOMIC|GFP_DMA);
+		if (!bounce_skb)
+			return;
+		dmaaddr = map_descbuffer(ring, bounce_skb->data, bounce_skb->len, 1);
+		if (dma_mapping_error(dmaaddr) || dmaaddr + skb->len > ring->bcm->dma_mask) {
+			if (!dma_mapping_error(dmaaddr))
+				unmap_descbuffer(ring, dmaaddr, skb->len, 1);
+			dev_kfree_skb_any(bounce_skb);
+			assert(0);
+			return;
+		}
+		memcpy(skb_put(bounce_skb, skb->len), skb->data, skb->len);
+		dev_kfree_skb_any(skb);
+		skb = bounce_skb;
+	}
 
 	meta->skb = skb;
-	dmaaddr = map_descbuffer(ring, skb->data, skb->len, 1);
 	meta->dmaaddr = dmaaddr;
 
 	fill_descriptor(ring, desc, dmaaddr,
-- 
cgit v0.10.2


From 36ad8cd7b1215ed896cab1b59a7a94577e7c4f6b Mon Sep 17 00:00:00 2001
From: Larry Finger <Larry.Finger@lwfinger.net>
Date: Tue, 23 Jan 2007 14:26:35 -0600
Subject: [PATCH] bcm43xx: Fix scaling error for 'iwlist rate' information

The bcm43xx scales the rate information supplied to a WE iwlist rate
call incorrectly.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

diff --git a/drivers/net/wireless/bcm43xx/bcm43xx_wx.c b/drivers/net/wireless/bcm43xx/bcm43xx_wx.c
index a659442..5b18852 100644
--- a/drivers/net/wireless/bcm43xx/bcm43xx_wx.c
+++ b/drivers/net/wireless/bcm43xx/bcm43xx_wx.c
@@ -261,22 +261,22 @@ static int bcm43xx_wx_get_rangeparams(struct net_device *net_dev,
 	if (phy->type == BCM43xx_PHYTYPE_A ||
 	    phy->type == BCM43xx_PHYTYPE_G) {
 		range->num_bitrates = 8;
-		range->bitrate[i++] = IEEE80211_OFDM_RATE_6MB;
-		range->bitrate[i++] = IEEE80211_OFDM_RATE_9MB;
-		range->bitrate[i++] = IEEE80211_OFDM_RATE_12MB;
-		range->bitrate[i++] = IEEE80211_OFDM_RATE_18MB;
-		range->bitrate[i++] = IEEE80211_OFDM_RATE_24MB;
-		range->bitrate[i++] = IEEE80211_OFDM_RATE_36MB;
-		range->bitrate[i++] = IEEE80211_OFDM_RATE_48MB;
-		range->bitrate[i++] = IEEE80211_OFDM_RATE_54MB;
+		range->bitrate[i++] = IEEE80211_OFDM_RATE_6MB * 500000;
+		range->bitrate[i++] = IEEE80211_OFDM_RATE_9MB * 500000;
+		range->bitrate[i++] = IEEE80211_OFDM_RATE_12MB * 500000;
+		range->bitrate[i++] = IEEE80211_OFDM_RATE_18MB * 500000;
+		range->bitrate[i++] = IEEE80211_OFDM_RATE_24MB * 500000;
+		range->bitrate[i++] = IEEE80211_OFDM_RATE_36MB * 500000;
+		range->bitrate[i++] = IEEE80211_OFDM_RATE_48MB * 500000;
+		range->bitrate[i++] = IEEE80211_OFDM_RATE_54MB * 500000;
 	}
 	if (phy->type == BCM43xx_PHYTYPE_B ||
 	    phy->type == BCM43xx_PHYTYPE_G) {
 		range->num_bitrates += 4;
-		range->bitrate[i++] = IEEE80211_CCK_RATE_1MB;
-		range->bitrate[i++] = IEEE80211_CCK_RATE_2MB;
-		range->bitrate[i++] = IEEE80211_CCK_RATE_5MB;
-		range->bitrate[i++] = IEEE80211_CCK_RATE_11MB;
+		range->bitrate[i++] = IEEE80211_CCK_RATE_1MB * 500000;
+		range->bitrate[i++] = IEEE80211_CCK_RATE_2MB * 500000;
+		range->bitrate[i++] = IEEE80211_CCK_RATE_5MB * 500000;
+		range->bitrate[i++] = IEEE80211_CCK_RATE_11MB * 500000;
 	}
 
 	geo = ieee80211_get_geo(bcm->ieee);
-- 
cgit v0.10.2


From d1dbd283d68cace314edd186cf530324186dd26e Mon Sep 17 00:00:00 2001
From: Larry Finger <Larry.Finger@lwfinger.net>
Date: Tue, 23 Jan 2007 16:43:26 -0600
Subject: [PATCH] bcm43xx: Fix scaling error for 'iwlist freq' information

The bcm43xx driver returns the available frequencies to 'iwlist freq'
with the wrong scaling.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

diff --git a/drivers/net/wireless/bcm43xx/bcm43xx_wx.c b/drivers/net/wireless/bcm43xx/bcm43xx_wx.c
index 5b18852..6961be6 100644
--- a/drivers/net/wireless/bcm43xx/bcm43xx_wx.c
+++ b/drivers/net/wireless/bcm43xx/bcm43xx_wx.c
@@ -286,7 +286,7 @@ static int bcm43xx_wx_get_rangeparams(struct net_device *net_dev,
 		if (j == IW_MAX_FREQUENCIES)
 			break;
 		range->freq[j].i = j + 1;
-		range->freq[j].m = geo->a[i].freq;//FIXME?
+		range->freq[j].m = geo->a[i].freq * 100000;
 		range->freq[j].e = 1;
 		j++;
 	}
@@ -294,7 +294,7 @@ static int bcm43xx_wx_get_rangeparams(struct net_device *net_dev,
 		if (j == IW_MAX_FREQUENCIES)
 			break;
 		range->freq[j].i = j + 1;
-		range->freq[j].m = geo->bg[i].freq;//FIXME?
+		range->freq[j].m = geo->bg[i].freq * 100000;
 		range->freq[j].e = 1;
 		j++;
 	}
-- 
cgit v0.10.2


From 95c777956d64c60631a637eb9a142fea88fb1e78 Mon Sep 17 00:00:00 2001
From: Michael Buesch <mb@bu3sch.de>
Date: Sun, 28 Jan 2007 14:32:52 -0600
Subject: [PATCH] bcm43xx: Enable fwpostfix in nondebug bcm43xx

The in-kernel bcm43xx driver only works with V3 firmware, whereas the
experimental version that incorporates the d80211 stack requires V4
firmware. In bcm43xx-d80211, the fwpostfix module parameter is used
to differentiate between the versions. In bcm43xx-softmac, this
module parameter is only enabled when debugging is on. This patch
makes the module parameter available unconditionaly, and should
ease the future transition from softmac to d80211.

Signed-off-by: Michael Buesch <mb@bu3sch.de>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

diff --git a/drivers/net/wireless/bcm43xx/bcm43xx_main.c b/drivers/net/wireless/bcm43xx/bcm43xx_main.c
index 91b752e..62c6235 100644
--- a/drivers/net/wireless/bcm43xx/bcm43xx_main.c
+++ b/drivers/net/wireless/bcm43xx/bcm43xx_main.c
@@ -95,13 +95,9 @@ static int modparam_noleds;
 module_param_named(noleds, modparam_noleds, int, 0444);
 MODULE_PARM_DESC(noleds, "Turn off all LED activity");
 
-#ifdef CONFIG_BCM43XX_DEBUG
 static char modparam_fwpostfix[64];
 module_param_string(fwpostfix, modparam_fwpostfix, 64, 0444);
-MODULE_PARM_DESC(fwpostfix, "Postfix for .fw files. Useful for debugging.");
-#else
-# define modparam_fwpostfix  ""
-#endif /* CONFIG_BCM43XX_DEBUG*/
+MODULE_PARM_DESC(fwpostfix, "Postfix for .fw files. Useful for using multiple firmware image versions.");
 
 
 /* If you want to debug with just a single device, enable this,
-- 
cgit v0.10.2


From 6e3632f66110b144183d53d550a51cbbbabc178f Mon Sep 17 00:00:00 2001
From: Ulrich Kunitz <kune@deine-taler.de>
Date: Mon, 29 Jan 2007 00:59:28 +0000
Subject: [PATCH] zd1211rw: Reset device in the probe call

This resets the device in the probe call. It does work with
2.6.19.2 including the softmac patches. It might fix the
reboot/reset problems a lot of people reported.

Signed-off-by: Ulrich Kunitz <kune@deine-taler.de>
Signed-off-by: Daniel Drake <dsd@gentoo.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

diff --git a/drivers/net/wireless/zd1211rw/zd_usb.c b/drivers/net/wireless/zd1211rw/zd_usb.c
index 2468ad6..3ac308a 100644
--- a/drivers/net/wireless/zd1211rw/zd_usb.c
+++ b/drivers/net/wireless/zd1211rw/zd_usb.c
@@ -1027,6 +1027,8 @@ static int probe(struct usb_interface *intf, const struct usb_device_id *id)
 		goto error;
 	}
 
+	usb_reset_device(interface_to_usbdev(intf));
+
 	netdev = zd_netdev_alloc(intf);
 	if (netdev == NULL) {
 		r = -ENOMEM;
-- 
cgit v0.10.2


From fa8e29cff748efc7118c66b51f1241a927d86b98 Mon Sep 17 00:00:00 2001
From: Ulrich Kunitz <kune@deine-taler.de>
Date: Mon, 29 Jan 2007 00:59:40 +0000
Subject: [PATCH] zd1211rw: Fixed array size issue in reset_mode

Andy Green found this issue.

Signed-off-by: Daniel Drake <dsd@gentoo.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

diff --git a/drivers/net/wireless/zd1211rw/zd_mac.c b/drivers/net/wireless/zd1211rw/zd_mac.c
index a085241..1379c91 100644
--- a/drivers/net/wireless/zd1211rw/zd_mac.c
+++ b/drivers/net/wireless/zd1211rw/zd_mac.c
@@ -156,7 +156,7 @@ void zd_mac_clear(struct zd_mac *mac)
 static int reset_mode(struct zd_mac *mac)
 {
 	struct ieee80211_device *ieee = zd_mac_to_ieee80211(mac);
-	struct zd_ioreq32 ioreqs[3] = {
+	struct zd_ioreq32 ioreqs[] = {
 		{ CR_RX_FILTER, STA_RX_FILTER },
 		{ CR_SNIFFER_ON, 0U },
 	};
@@ -164,10 +164,9 @@ static int reset_mode(struct zd_mac *mac)
 	if (ieee->iw_mode == IW_MODE_MONITOR) {
 		ioreqs[0].value = 0xffffffff;
 		ioreqs[1].value = 0x1;
-		ioreqs[2].value = ENC_SNIFFER;
 	}
 
-	return zd_iowrite32a(&mac->chip, ioreqs, 3);
+	return zd_iowrite32a(&mac->chip, ioreqs, ARRAY_SIZE(ioreqs));
 }
 
 int zd_mac_open(struct net_device *netdev)
-- 
cgit v0.10.2


From 22d3405f62c1cef6661ced96a64458235f9c5fe5 Mon Sep 17 00:00:00 2001
From: Ulrich Kunitz <kune@deine-taler.de>
Date: Mon, 29 Jan 2007 01:00:03 +0000
Subject: [PATCH] zd1211rw: Added error stats update

Added update of network device error statistics.

Based on earlier work by Maxime Austruy.

Signed-off-by: Ulrich Kunitz <kune@deine-taler.de>
Signed-off-by: Daniel Drake <dsd@gentoo.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

diff --git a/drivers/net/wireless/zd1211rw/zd_mac.c b/drivers/net/wireless/zd1211rw/zd_mac.c
index 1379c91..7070781 100644
--- a/drivers/net/wireless/zd1211rw/zd_mac.c
+++ b/drivers/net/wireless/zd1211rw/zd_mac.c
@@ -903,16 +903,21 @@ static int fill_ctrlset(struct zd_mac *mac,
 static int zd_mac_tx(struct zd_mac *mac, struct ieee80211_txb *txb, int pri)
 {
 	int i, r;
+	struct ieee80211_device *ieee = zd_mac_to_ieee80211(mac);
 
 	for (i = 0; i < txb->nr_frags; i++) {
 		struct sk_buff *skb = txb->fragments[i];
 
 		r = fill_ctrlset(mac, txb, i);
-		if (r)
+		if (r) {
+			ieee->stats.tx_dropped++;
 			return r;
+		}
 		r = zd_usb_tx(&mac->chip.usb, skb->data, skb->len);
-		if (r)
+		if (r) {
+			ieee->stats.tx_dropped++;
 			return r;
+		}
 	}
 
 	/* FIXME: shouldn't this be handled by the upper layers? */
@@ -1062,9 +1067,23 @@ static int fill_rx_stats(struct ieee80211_rx_stats *stats,
 
 	*pstatus = status = zd_tail(buffer, length, sizeof(struct rx_status));
 	if (status->frame_status & ZD_RX_ERROR) {
-		/* FIXME: update? */
+		struct ieee80211_device *ieee = zd_mac_to_ieee80211(mac);
+		ieee->stats.rx_errors++;
+		if (status->frame_status & ZD_RX_TIMEOUT_ERROR)
+			ieee->stats.rx_missed_errors++;
+		else if (status->frame_status & ZD_RX_FIFO_OVERRUN_ERROR)
+			ieee->stats.rx_fifo_errors++;
+		else if (status->frame_status & ZD_RX_DECRYPTION_ERROR)
+			ieee->ieee_stats.rx_discards_undecryptable++;
+		else if (status->frame_status & ZD_RX_CRC32_ERROR) {
+			ieee->stats.rx_crc_errors++;
+			ieee->ieee_stats.rx_fcs_errors++;
+		}
+		else if (status->frame_status & ZD_RX_CRC16_ERROR)
+			ieee->stats.rx_crc_errors++;
 		return -EINVAL;
 	}
+
 	memset(stats, 0, sizeof(struct ieee80211_rx_stats));
 	stats->len = length - (ZD_PLCP_HEADER_SIZE + IEEE80211_FCS_LEN +
 		               + sizeof(struct rx_status));
@@ -1093,6 +1112,8 @@ static void zd_mac_rx(struct zd_mac *mac, struct sk_buff *skb)
 	if (skb->len < ZD_PLCP_HEADER_SIZE + IEEE80211_1ADDR_LEN +
 	               IEEE80211_FCS_LEN + sizeof(struct rx_status))
 	{
+		ieee->stats.rx_errors++;
+		ieee->stats.rx_length_errors++;
 		dev_dbg_f(zd_mac_dev(mac), "Packet with length %u to small.\n",
 			 skb->len);
 		goto free_skb;
@@ -1100,7 +1121,9 @@ static void zd_mac_rx(struct zd_mac *mac, struct sk_buff *skb)
 
 	r = fill_rx_stats(&stats, &status, mac, skb->data, skb->len);
 	if (r) {
-		/* Only packets with rx errors are included here. */
+		/* Only packets with rx errors are included here.
+		 * The error stats have already been set in fill_rx_stats.
+		 */
 		goto free_skb;
 	}
 
@@ -1113,8 +1136,10 @@ static void zd_mac_rx(struct zd_mac *mac, struct sk_buff *skb)
 
 	r = filter_rx(ieee, skb->data, skb->len, &stats);
 	if (r <= 0) {
-		if (r < 0)
+		if (r < 0) {
+			ieee->stats.rx_errors++;
 			dev_dbg_f(zd_mac_dev(mac), "Error in packet.\n");
+		}
 		goto free_skb;
 	}
 
@@ -1145,7 +1170,9 @@ int zd_mac_rx_irq(struct zd_mac *mac, const u8 *buffer, unsigned int length)
 
 	skb = dev_alloc_skb(sizeof(struct zd_rt_hdr) + length);
 	if (!skb) {
+		struct ieee80211_device *ieee = zd_mac_to_ieee80211(mac);
 		dev_warn(zd_mac_dev(mac), "Could not allocate skb.\n");
+		ieee->stats.rx_dropped++;
 		return -ENOMEM;
 	}
 	skb_reserve(skb, sizeof(struct zd_rt_hdr));
diff --git a/drivers/net/wireless/zd1211rw/zd_usb.c b/drivers/net/wireless/zd1211rw/zd_usb.c
index 3ac308a..a3217a8 100644
--- a/drivers/net/wireless/zd1211rw/zd_usb.c
+++ b/drivers/net/wireless/zd1211rw/zd_usb.c
@@ -401,6 +401,12 @@ out:
 
 static inline void handle_retry_failed_int(struct urb *urb)
 {
+	struct zd_usb *usb = urb->context;
+	struct zd_mac *mac = zd_usb_to_mac(usb);
+	struct ieee80211_device *ieee = zd_mac_to_ieee80211(mac);
+
+	ieee->stats.tx_errors++;
+	ieee->ieee_stats.tx_retry_limit_exceeded++;
 	dev_dbg_f(urb_dev(urb), "retry failed interrupt\n");
 }
 
@@ -575,6 +581,9 @@ static void handle_rx_packet(struct zd_usb *usb, const u8 *buffer,
 
 	if (length < sizeof(struct rx_length_info)) {
 		/* It's not a complete packet anyhow. */
+		struct ieee80211_device *ieee = zd_mac_to_ieee80211(mac);
+		ieee->stats.rx_errors++;
+		ieee->stats.rx_length_errors++;
 		return;
 	}
 	length_info = (struct rx_length_info *)
-- 
cgit v0.10.2


From 48f33c95291e429963dcd2dfe625d189d83e3925 Mon Sep 17 00:00:00 2001
From: Daniel Drake <dsd@gentoo.org>
Date: Mon, 29 Jan 2007 01:00:30 +0000
Subject: [PATCH] zd1211rw: Remove noisy debug message

This causes a lot of uninteresting output in noisy environments, and
doesn't really serve any purpose.

Signed-off-by: Daniel Drake <dsd@gentoo.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

diff --git a/drivers/net/wireless/zd1211rw/zd_mac.c b/drivers/net/wireless/zd1211rw/zd_mac.c
index 7070781..4c5f78e 100644
--- a/drivers/net/wireless/zd1211rw/zd_mac.c
+++ b/drivers/net/wireless/zd1211rw/zd_mac.c
@@ -1114,8 +1114,6 @@ static void zd_mac_rx(struct zd_mac *mac, struct sk_buff *skb)
 	{
 		ieee->stats.rx_errors++;
 		ieee->stats.rx_length_errors++;
-		dev_dbg_f(zd_mac_dev(mac), "Packet with length %u to small.\n",
-			 skb->len);
 		goto free_skb;
 	}
 
-- 
cgit v0.10.2


From ae80031a171b81d28b92877e7a9ce9b26cbfe051 Mon Sep 17 00:00:00 2001
From: "Robert P. J. Day" <rpjday@mindspring.com>
Date: Wed, 31 Jan 2007 02:39:40 -0500
Subject: [PATCH] Rename IPW2100 debugging macros to not look like config
 options.

  Rename some internal ipw2100 debugging macros to not look like
user-settable kernel config settings.

Signed-off-by: Robert P. J. Day <rpjday@mindspring.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

diff --git a/drivers/net/wireless/ipw2100.c b/drivers/net/wireless/ipw2100.c
index b85857a..d0639a4 100644
--- a/drivers/net/wireless/ipw2100.c
+++ b/drivers/net/wireless/ipw2100.c
@@ -175,7 +175,7 @@ that only one external action is invoked at a time.
 
 /* Debugging stuff */
 #ifdef CONFIG_IPW2100_DEBUG
-#define CONFIG_IPW2100_RX_DEBUG	/* Reception debugging */
+#define IPW2100_RX_DEBUG	/* Reception debugging */
 #endif
 
 MODULE_DESCRIPTION(DRV_DESCRIPTION);
@@ -2239,7 +2239,7 @@ static void ipw2100_snapshot_free(struct ipw2100_priv *priv)
 	priv->snapshot[0] = NULL;
 }
 
-#ifdef CONFIG_IPW2100_DEBUG_C3
+#ifdef IPW2100_DEBUG_C3
 static int ipw2100_snapshot_alloc(struct ipw2100_priv *priv)
 {
 	int i;
@@ -2314,13 +2314,13 @@ static u32 ipw2100_match_buf(struct ipw2100_priv *priv, u8 * in_buf,
  * The size of the constructed ethernet
  *
  */
-#ifdef CONFIG_IPW2100_RX_DEBUG
+#ifdef IPW2100_RX_DEBUG
 static u8 packet_data[IPW_RX_NIC_BUFFER_LENGTH];
 #endif
 
 static void ipw2100_corruption_detected(struct ipw2100_priv *priv, int i)
 {
-#ifdef CONFIG_IPW2100_DEBUG_C3
+#ifdef IPW2100_DEBUG_C3
 	struct ipw2100_status *status = &priv->status_queue.drv[i];
 	u32 match, reg;
 	int j;
@@ -2342,7 +2342,7 @@ static void ipw2100_corruption_detected(struct ipw2100_priv *priv, int i)
 	}
 #endif
 
-#ifdef CONFIG_IPW2100_DEBUG_C3
+#ifdef IPW2100_DEBUG_C3
 	/* Halt the fimrware so we can get a good image */
 	write_register(priv->net_dev, IPW_REG_RESET_REG,
 		       IPW_AUX_HOST_RESET_REG_STOP_MASTER);
@@ -2413,7 +2413,7 @@ static void isr_rx(struct ipw2100_priv *priv, int i,
 
 	skb_put(packet->skb, status->frame_size);
 
-#ifdef CONFIG_IPW2100_RX_DEBUG
+#ifdef IPW2100_RX_DEBUG
 	/* Make a copy of the frame so we can dump it to the logs if
 	 * ieee80211_rx fails */
 	memcpy(packet_data, packet->skb->data,
@@ -2421,7 +2421,7 @@ static void isr_rx(struct ipw2100_priv *priv, int i,
 #endif
 
 	if (!ieee80211_rx(priv->ieee, packet->skb, stats)) {
-#ifdef CONFIG_IPW2100_RX_DEBUG
+#ifdef IPW2100_RX_DEBUG
 		IPW_DEBUG_DROP("%s: Non consumed packet:\n",
 			       priv->net_dev->name);
 		printk_buf(IPW_DL_DROP, packet_data, status->frame_size);
@@ -4912,7 +4912,7 @@ static int ipw2100_set_power_mode(struct ipw2100_priv *priv, int power_level)
 	else
 		priv->power_mode = IPW_POWER_ENABLED | power_level;
 
-#ifdef CONFIG_IPW2100_TX_POWER
+#ifdef IPW2100_TX_POWER
 	if (priv->port_type == IBSS && priv->adhoc_power != DFTL_IBSS_TX_POWER) {
 		/* Set beacon interval */
 		cmd.host_command = TX_POWER_INDEX;
-- 
cgit v0.10.2


From 9d4a6040fc6222ca57c271289a7540292640a5a4 Mon Sep 17 00:00:00 2001
From: "Robert P. J. Day" <rpjday@mindspring.com>
Date: Mon, 5 Feb 2007 16:41:36 -0800
Subject: [PATCH] Replace incorrect macro name "WIRELESS_EXT" with
 "CONFIG_WIRELESS_EXT"

Rename the (apparently) incorrect macro name WIRELESS_EXT to
CONFIG_WIRELESS_EXT.

Signed-off-by: Robert P. J. Day <rpjday@mindspring.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

diff --git a/net/core/net-sysfs.c b/net/core/net-sysfs.c
index f47f319..44e69a21 100644
--- a/net/core/net-sysfs.c
+++ b/net/core/net-sysfs.c
@@ -329,7 +329,7 @@ static struct attribute_group netstat_group = {
 	.attrs  = netstat_attrs,
 };
 
-#ifdef WIRELESS_EXT
+#ifdef CONFIG_WIRELESS_EXT
 /* helper function that does all the locking etc for wireless stats */
 static ssize_t wireless_show(struct class_device *cd, char *buf,
 			     ssize_t (*format)(const struct iw_statistics *,
@@ -462,7 +462,7 @@ int netdev_register_sysfs(struct net_device *net)
 	if (net->get_stats)
 		*groups++ = &netstat_group;
 
-#ifdef WIRELESS_EXT
+#ifdef CONFIG_WIRELESS_EXT
 	if (net->wireless_handlers && net->wireless_handlers->get_wireless_stats)
 		*groups++ = &wireless_group;
 #endif
-- 
cgit v0.10.2


From cad8cd9c3160e7e2e65c6999b58b3fde8de56aca Mon Sep 17 00:00:00 2001
From: Larry Finger <Larry.Finger@lwfinger.net>
Date: Thu, 18 Jan 2007 22:06:59 -0600
Subject: [PATCH] bcm43xx: Check error returns in initialization routines

A number of the calls in the initialization routines fail to check the returned value for
errors. This patch adds the necessary checks and logs any errors found when appropriate.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

diff --git a/drivers/net/wireless/bcm43xx/bcm43xx_main.c b/drivers/net/wireless/bcm43xx/bcm43xx_main.c
index 62c6235..63fc16f 100644
--- a/drivers/net/wireless/bcm43xx/bcm43xx_main.c
+++ b/drivers/net/wireless/bcm43xx/bcm43xx_main.c
@@ -2976,8 +2976,10 @@ static int bcm43xx_chipset_attach(struct bcm43xx_private *bcm)
 	err = bcm43xx_pctl_set_crystal(bcm, 1);
 	if (err)
 		goto out;
-	bcm43xx_pci_read_config16(bcm, PCI_STATUS, &pci_status);
-	bcm43xx_pci_write_config16(bcm, PCI_STATUS, pci_status & ~PCI_STATUS_SIG_TARGET_ABORT);
+	err = bcm43xx_pci_read_config16(bcm, PCI_STATUS, &pci_status);
+	if (err)
+		goto out;
+	err = bcm43xx_pci_write_config16(bcm, PCI_STATUS, pci_status & ~PCI_STATUS_SIG_TARGET_ABORT);
 
 out:
 	return err;
@@ -3774,12 +3776,18 @@ static int bcm43xx_attach_board(struct bcm43xx_private *bcm)
 	}
 	net_dev->base_addr = (unsigned long)bcm->mmio_addr;
 
-	bcm43xx_pci_read_config16(bcm, PCI_SUBSYSTEM_VENDOR_ID,
+	err = bcm43xx_pci_read_config16(bcm, PCI_SUBSYSTEM_VENDOR_ID,
 	                          &bcm->board_vendor);
-	bcm43xx_pci_read_config16(bcm, PCI_SUBSYSTEM_ID,
+	if (err)
+		goto err_iounmap;
+	err = bcm43xx_pci_read_config16(bcm, PCI_SUBSYSTEM_ID,
 	                          &bcm->board_type);
-	bcm43xx_pci_read_config16(bcm, PCI_REVISION_ID,
+	if (err)
+		goto err_iounmap;
+	err = bcm43xx_pci_read_config16(bcm, PCI_REVISION_ID,
 	                          &bcm->board_revision);
+	if (err)
+		goto err_iounmap;
 
 	err = bcm43xx_chipset_attach(bcm);
 	if (err)
@@ -3870,6 +3878,7 @@ err_pci_release:
 	pci_release_regions(pci_dev);
 err_pci_disable:
 	pci_disable_device(pci_dev);
+	printk(KERN_ERR PFX "Unable to attach board\n");
 	goto out;
 }
 
-- 
cgit v0.10.2


From 46b8c85e1df091fe2d53ae7d02addb0dc58a9123 Mon Sep 17 00:00:00 2001
From: Larry Finger <Larry.Finger@lwfinger.net>
Date: Wed, 31 Jan 2007 18:50:19 -0600
Subject: [PATCH] ieee80211: Fix sparse warning

Sparse issues the warning "warning: symbol 'crypt' shadows an earlier one"
in net/ieee80211/ieee80211_tx.c.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

diff --git a/net/ieee80211/ieee80211_tx.c b/net/ieee80211/ieee80211_tx.c
index 854fc13..54e0116 100644
--- a/net/ieee80211/ieee80211_tx.c
+++ b/net/ieee80211/ieee80211_tx.c
@@ -502,9 +502,6 @@ int ieee80211_xmit(struct sk_buff *skb, struct net_device *dev)
 		if (host_encrypt)
 			ieee80211_encrypt_fragment(ieee, skb_frag, hdr_len);
 		else if (host_build_iv) {
-			struct ieee80211_crypt_data *crypt;
-
-			crypt = ieee->crypt[ieee->tx_keyidx];
 			atomic_inc(&crypt->refcnt);
 			if (crypt->ops->build_iv)
 				crypt->ops->build_iv(skb_frag, hdr_len,
-- 
cgit v0.10.2


From d2db9eea7901d83e494340c93d131fc1fd463e4c Mon Sep 17 00:00:00 2001
From: Jan-Bernd Themann <ossthema@de.ibm.com>
Date: Fri, 9 Feb 2007 09:10:51 +0100
Subject: ehea: Fixed error recovery

Error recovery for QP errors: Reset QPs and dump error information

Signed-off-by: Jan-Bernd Themann <themann@de.ibm.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

diff --git a/drivers/net/ehea/ehea.h b/drivers/net/ehea/ehea.h
index 272e1ec..42295d6 100644
--- a/drivers/net/ehea/ehea.h
+++ b/drivers/net/ehea/ehea.h
@@ -39,7 +39,7 @@
 #include <asm/io.h>
 
 #define DRV_NAME	"ehea"
-#define DRV_VERSION	"EHEA_0045"
+#define DRV_VERSION	"EHEA_0046"
 
 #define EHEA_MSG_DEFAULT (NETIF_MSG_LINK | NETIF_MSG_TIMER \
 	| NETIF_MSG_RX_ERR | NETIF_MSG_TX_ERR)
diff --git a/drivers/net/ehea/ehea_main.c b/drivers/net/ehea/ehea_main.c
index 9de2d38..1ef3846 100644
--- a/drivers/net/ehea/ehea_main.c
+++ b/drivers/net/ehea/ehea_main.c
@@ -76,7 +76,7 @@ void ehea_dump(void *adr, int len, char *msg) {
 	int x;
 	unsigned char *deb = adr;
 	for (x = 0; x < len; x += 16) {
-		printk(DRV_NAME "%s adr=%p ofs=%04x %016lx %016lx\n", msg,
+		printk(DRV_NAME " %s adr=%p ofs=%04x %016lx %016lx\n", msg,
 			  deb, x, *((u64*)&deb[0]), *((u64*)&deb[8]));
 		deb += 16;
 	}
@@ -555,6 +555,7 @@ static irqreturn_t ehea_qp_aff_irq_handler(int irq, void *param)
 {
 	struct ehea_port *port = param;
 	struct ehea_eqe *eqe;
+	struct ehea_qp *qp;
 	u32 qp_token;
 
 	eqe = ehea_poll_eq(port->qp_eq);
@@ -563,9 +564,14 @@ static irqreturn_t ehea_qp_aff_irq_handler(int irq, void *param)
 		qp_token = EHEA_BMASK_GET(EHEA_EQE_QP_TOKEN, eqe->entry);
 		ehea_error("QP aff_err: entry=0x%lx, token=0x%x",
 			   eqe->entry, qp_token);
+
+		qp = port->port_res[qp_token].qp;
+		ehea_error_data(port->adapter, qp->fw_handle);
 		eqe = ehea_poll_eq(port->qp_eq);
 	}
 
+	queue_work(port->adapter->ehea_wq, &port->reset_task);
+
 	return IRQ_HANDLED;
 }
 
diff --git a/drivers/net/ehea/ehea_phyp.c b/drivers/net/ehea/ehea_phyp.c
index 37716e05e8..bc3c005 100644
--- a/drivers/net/ehea/ehea_phyp.c
+++ b/drivers/net/ehea/ehea_phyp.c
@@ -612,3 +612,13 @@ u64 ehea_h_reset_events(const u64 adapter_handle, const u64 neq_handle,
 				       event_mask,		/* R6 */
 				       0, 0, 0, 0);		/* R7-R12 */
 }
+
+u64 ehea_h_error_data(const u64 adapter_handle, const u64 ressource_handle,
+		      void *rblock)
+{
+	return ehea_plpar_hcall_norets(H_ERROR_DATA,
+				       adapter_handle,          /* R4 */
+				       ressource_handle,        /* R5 */
+				       virt_to_abs(rblock),     /* R6 */
+				       0, 0, 0, 0);             /* R7-R12 */
+}
diff --git a/drivers/net/ehea/ehea_phyp.h b/drivers/net/ehea/ehea_phyp.h
index 919f94b..90acddb 100644
--- a/drivers/net/ehea/ehea_phyp.h
+++ b/drivers/net/ehea/ehea_phyp.h
@@ -454,4 +454,7 @@ u64 ehea_h_reg_dereg_bcmc(const u64 adapter_handle, const u16 port_num,
 u64 ehea_h_reset_events(const u64 adapter_handle, const u64 neq_handle,
 			const u64 event_mask);
 
+u64 ehea_h_error_data(const u64 adapter_handle, const u64 ressource_handle,
+		      void *rblock);
+
 #endif	/* __EHEA_PHYP_H__ */
diff --git a/drivers/net/ehea/ehea_qmr.c b/drivers/net/ehea/ehea_qmr.c
index f143e13..96ff3b6 100644
--- a/drivers/net/ehea/ehea_qmr.c
+++ b/drivers/net/ehea/ehea_qmr.c
@@ -486,6 +486,7 @@ int ehea_destroy_qp(struct ehea_qp *qp)
 	if (!qp)
 		return 0;
 
+	ehea_h_disable_and_get_hea(qp->adapter->handle, qp->fw_handle);
 	hret = ehea_h_free_resource(qp->adapter->handle, qp->fw_handle);
 	if (hret != H_SUCCESS) {
 		ehea_error("destroy_qp failed");
@@ -581,4 +582,45 @@ out:
 	return ret;
 }
 
+void print_error_data(u64 *data)
+{
+	int length;
+	u64 type = EHEA_BMASK_GET(ERROR_DATA_TYPE, data[2]);
+	u64 resource = data[1];
+
+	length = EHEA_BMASK_GET(ERROR_DATA_LENGTH, data[0]);
+
+	if (length > EHEA_PAGESIZE)
+		length = EHEA_PAGESIZE;
+
+	if (type == 0x8) /* Queue Pair */
+		ehea_error("QP (resource=%lX) state: AER=0x%lX, AERR=0x%lX, "
+			   "port=%lX", resource, data[6], data[12], data[22]);
+
+	ehea_dump(data, length, "error data");
+}
+
+void ehea_error_data(struct ehea_adapter *adapter, u64 res_handle)
+{
+	unsigned long ret;
+	u64 *rblock;
+
+	rblock = kzalloc(PAGE_SIZE, GFP_KERNEL);
+	if (!rblock) {
+		ehea_error("Cannot allocate rblock memory.");
+		return;
+	}
 
+	ret = ehea_h_error_data(adapter->handle,
+				res_handle,
+				rblock);
+
+	if (ret == H_R_STATE)
+		ehea_error("No error data is available: %lX.", res_handle);
+	else if (ret == H_SUCCESS)
+		print_error_data(rblock);
+	else
+		ehea_error("Error data could not be fetched: %lX", res_handle);
+
+	kfree(rblock);
+}
diff --git a/drivers/net/ehea/ehea_qmr.h b/drivers/net/ehea/ehea_qmr.h
index 7efdc96..1ff6098 100644
--- a/drivers/net/ehea/ehea_qmr.h
+++ b/drivers/net/ehea/ehea_qmr.h
@@ -180,6 +180,9 @@ struct ehea_eqe {
 	u64 entry;
 };
 
+#define ERROR_DATA_LENGTH  EHEA_BMASK_IBM(52,63)
+#define ERROR_DATA_TYPE    EHEA_BMASK_IBM(0,7)
+
 static inline void *hw_qeit_calc(struct hw_queue *queue, u64 q_offset)
 {
 	struct ehea_page *current_page;
@@ -355,4 +358,6 @@ int ehea_destroy_qp(struct ehea_qp *qp);
 
 int ehea_reg_mr_adapter(struct ehea_adapter *adapter);
 
+void ehea_error_data(struct ehea_adapter *adapter, u64 res_handle);
+
 #endif	/* __EHEA_QMR_H__ */
-- 
cgit v0.10.2


From 9b41011724024238c94b4c5469df11bb4fd3ba12 Mon Sep 17 00:00:00 2001
From: "Amit S. Kale" <amitkale@netxen.com>
Date: Fri, 9 Feb 2007 05:45:18 -0800
Subject: NetXen: Fixes for ppc architecture.

NetXen: Fixes for ppc architecture.

Signed-off-by: Amit S. Kale <amitkale@netxen.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

diff --git a/drivers/net/netxen/netxen_nic_hw.c b/drivers/net/netxen/netxen_nic_hw.c
index f263232..7195af3 100644
--- a/drivers/net/netxen/netxen_nic_hw.c
+++ b/drivers/net/netxen/netxen_nic_hw.c
@@ -420,6 +420,7 @@ static int netxen_get_flash_block(struct netxen_adapter *adapter, int base,
 	for (i = 0; i < size / sizeof(u32); i++) {
 		if (netxen_rom_fast_read(adapter, addr, ptr32) == -1)
 			return -1;
+		*ptr32 = cpu_to_le32(*ptr32);
 		ptr32++;
 		addr += sizeof(u32);
 	}
@@ -428,6 +429,7 @@ static int netxen_get_flash_block(struct netxen_adapter *adapter, int base,
 
 		if (netxen_rom_fast_read(adapter, addr, &local) == -1)
 			return -1;
+		local = cpu_to_le32(local);
 		memcpy(ptr32, &local, (char *)buf + size - (char *)ptr32);
 	}
 
diff --git a/drivers/net/netxen/netxen_nic_init.c b/drivers/net/netxen/netxen_nic_init.c
index f7bb8c9..c243c16 100644
--- a/drivers/net/netxen/netxen_nic_init.c
+++ b/drivers/net/netxen/netxen_nic_init.c
@@ -1246,7 +1246,7 @@ int netxen_process_cmd_ring(unsigned long data)
 	 * the netdev which is associated with that device.
 	 */
 
-	consumer = *(adapter->cmd_consumer);
+	consumer = le32_to_cpu(*(adapter->cmd_consumer));
 	if (last_consumer == consumer) {	/* Ring is empty    */
 		DPRINTK(INFO, "last_consumer %d == consumer %d\n",
 			last_consumer, consumer);
@@ -1340,7 +1340,7 @@ int netxen_process_cmd_ring(unsigned long data)
 	if (adapter->last_cmd_consumer == consumer &&
 	    (((adapter->cmd_producer + 1) %
 	      adapter->max_tx_desc_count) == adapter->last_cmd_consumer)) {
-		consumer = *(adapter->cmd_consumer);
+		consumer = le32_to_cpu(*(adapter->cmd_consumer));
 	}
 	done = (adapter->last_cmd_consumer == consumer);
 
diff --git a/drivers/net/netxen/netxen_nic_main.c b/drivers/net/netxen/netxen_nic_main.c
index 69c1b9d..c2da7ec 100644
--- a/drivers/net/netxen/netxen_nic_main.c
+++ b/drivers/net/netxen/netxen_nic_main.c
@@ -434,12 +434,13 @@ netxen_nic_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 		adapter->port_count++;
 		adapter->port[i] = port;
 	}
-
+#ifndef CONFIG_PPC64
 	writel(0, NETXEN_CRB_NORMALIZE(adapter, CRB_CMDPEG_STATE));
 	netxen_pinit_from_rom(adapter, 0);
 	udelay(500);
 	netxen_load_firmware(adapter);
 	netxen_phantom_init(adapter, NETXEN_NIC_PEG_TUNE);
+#endif
 	/*
 	 * delay a while to ensure that the Pegs are up & running.
 	 * Otherwise, we might see some flaky behaviour.
diff --git a/drivers/net/netxen/netxen_nic_niu.c b/drivers/net/netxen/netxen_nic_niu.c
index 40d7003..d5d9507 100644
--- a/drivers/net/netxen/netxen_nic_niu.c
+++ b/drivers/net/netxen/netxen_nic_niu.c
@@ -458,7 +458,7 @@ int netxen_niu_gbe_init_port(struct netxen_adapter *adapter, int port)
 
 int netxen_niu_xg_init_port(struct netxen_adapter *adapter, int port)
 {
-	long reg = 0, ret = 0;
+	u32 reg = 0, ret = 0;
 
 	if (adapter->ahw.boardcfg.board_type == NETXEN_BRDTYPE_P2_SB31_10G_IMEZ) {
 		netxen_crb_writelit_adapter(adapter,
-- 
cgit v0.10.2


From e45d9ab4051d99c9f237c96e75c4dd6671661236 Mon Sep 17 00:00:00 2001
From: "Amit S. Kale" <amitkale@netxen.com>
Date: Fri, 9 Feb 2007 05:49:08 -0800
Subject: NetXen: Updates for ethtool support

NetXen: Updates for ethtool support.

Signed-off-by: Amit S. Kale <amitkale@netxen.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

diff --git a/drivers/net/netxen/netxen_nic.h b/drivers/net/netxen/netxen_nic.h
index 3f3896e..e021a30 100644
--- a/drivers/net/netxen/netxen_nic.h
+++ b/drivers/net/netxen/netxen_nic.h
@@ -1040,6 +1040,7 @@ int netxen_flash_unlock(struct netxen_adapter *adapter);
 int netxen_backup_crbinit(struct netxen_adapter *adapter);
 int netxen_flash_erase_secondary(struct netxen_adapter *adapter);
 int netxen_flash_erase_primary(struct netxen_adapter *adapter);
+void netxen_halt_pegs(struct netxen_adapter *adapter);
 
 int netxen_rom_fast_write(struct netxen_adapter *adapter, int addr, int data);
 int netxen_rom_se(struct netxen_adapter *adapter, int addr);
diff --git a/drivers/net/netxen/netxen_nic_ethtool.c b/drivers/net/netxen/netxen_nic_ethtool.c
index cc0efe2..6252e9a 100644
--- a/drivers/net/netxen/netxen_nic_ethtool.c
+++ b/drivers/net/netxen/netxen_nic_ethtool.c
@@ -402,7 +402,7 @@ netxen_nic_get_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
 	wol->wolopts = 0;
 }
 
-static u32 netxen_nic_get_link(struct net_device *dev)
+static u32 netxen_nic_test_link(struct net_device *dev)
 {
 	struct netxen_port *port = netdev_priv(dev);
 	struct netxen_adapter *adapter = port->adapter;
@@ -459,6 +459,7 @@ netxen_nic_set_eeprom(struct net_device *dev, struct ethtool_eeprom *eeprom,
 	int ret;
 
 	if (flash_start == 0) {
+		netxen_halt_pegs(adapter);
 		ret = netxen_flash_unlock(adapter);
 		if (ret < 0) {
 			printk(KERN_ERR "%s: Flash unlock failed.\n",
@@ -712,7 +713,7 @@ netxen_nic_diag_test(struct net_device *dev, struct ethtool_test *eth_test,
 {
 	if (eth_test->flags == ETH_TEST_FL_OFFLINE) {	/* offline tests */
 		/* link test */
-		if (!(data[4] = (u64) netxen_nic_get_link(dev)))
+		if (!(data[4] = (u64) netxen_nic_test_link(dev)))
 			eth_test->flags |= ETH_TEST_FL_FAILED;
 
 		if (netif_running(dev))
@@ -727,7 +728,7 @@ netxen_nic_diag_test(struct net_device *dev, struct ethtool_test *eth_test,
 			dev->open(dev);
 	} else {		/* online tests */
 		/* link test */
-		if (!(data[4] = (u64) netxen_nic_get_link(dev)))
+		if (!(data[4] = (u64) netxen_nic_test_link(dev)))
 			eth_test->flags |= ETH_TEST_FL_FAILED;
 
 		/* other tests pass by default */
@@ -783,7 +784,7 @@ struct ethtool_ops netxen_nic_ethtool_ops = {
 	.get_regs_len = netxen_nic_get_regs_len,
 	.get_regs = netxen_nic_get_regs,
 	.get_wol = netxen_nic_get_wol,
-	.get_link = netxen_nic_get_link,
+	.get_link = ethtool_op_get_link,
 	.get_eeprom_len = netxen_nic_get_eeprom_len,
 	.get_eeprom = netxen_nic_get_eeprom,
 	.set_eeprom = netxen_nic_set_eeprom,
diff --git a/drivers/net/netxen/netxen_nic_init.c b/drivers/net/netxen/netxen_nic_init.c
index c243c16..2f32436 100644
--- a/drivers/net/netxen/netxen_nic_init.c
+++ b/drivers/net/netxen/netxen_nic_init.c
@@ -717,6 +717,14 @@ netxen_flash_erase_primary(struct netxen_adapter *adapter)
 	return ret;
 }
 
+void netxen_halt_pegs(struct netxen_adapter *adapter)
+{
+	 netxen_crb_writelit_adapter(adapter, NETXEN_CRB_PEG_NET_0 + 0x3c, 1);
+	 netxen_crb_writelit_adapter(adapter, NETXEN_CRB_PEG_NET_1 + 0x3c, 1);
+	 netxen_crb_writelit_adapter(adapter, NETXEN_CRB_PEG_NET_2 + 0x3c, 1);
+	 netxen_crb_writelit_adapter(adapter, NETXEN_CRB_PEG_NET_3 + 0x3c, 1);
+}
+
 int netxen_flash_unlock(struct netxen_adapter *adapter)
 {
 	int ret = 0;
-- 
cgit v0.10.2


From 1a1689344add3333d28d1b5495d8043a3877d01c Mon Sep 17 00:00:00 2001
From: Randy Dunlap <randy.dunlap@oracle.com>
Date: Mon, 5 Feb 2007 10:44:20 -0800
Subject: phy devices: use same arg types

sparse complains about differing types from prototype to
definition, so change the u32 to phy_interface_t:

drivers/net/phy/phy_device.c:140:19: error: symbol 'phy_connect' redeclared with different type (originally declared at include/linux/phy.h:362) - incompatible argument 5 (different signedness)
drivers/net/phy/phy_device.c:190:19: error: symbol 'phy_attach' redeclared with different type (originally declared at include/linux/phy.h:360) - incompatible argument 4 (different signedness)

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c
index a4d7529..deda210 100644
--- a/drivers/net/phy/phy_device.c
+++ b/drivers/net/phy/phy_device.c
@@ -139,7 +139,7 @@ void phy_prepare_link(struct phy_device *phydev,
  */
 struct phy_device * phy_connect(struct net_device *dev, const char *phy_id,
 		void (*handler)(struct net_device *), u32 flags,
-		u32 interface)
+		phy_interface_t interface)
 {
 	struct phy_device *phydev;
 
@@ -188,7 +188,7 @@ static int phy_compare_id(struct device *dev, void *data)
 }
 
 struct phy_device *phy_attach(struct net_device *dev,
-		const char *phy_id, u32 flags, u32 interface)
+		const char *phy_id, u32 flags, phy_interface_t interface)
 {
 	struct bus_type *bus = &mdio_bus_type;
 	struct phy_device *phydev;
-- 
cgit v0.10.2


From 4409d28140d9a6e6e3f4f1fdaf7234c4b965d954 Mon Sep 17 00:00:00 2001
From: Kumar Gala <galak@kernel.crashing.org>
Date: Mon, 12 Feb 2007 23:40:06 -0600
Subject: Convert network devices to use struct device instead of class_device

Convert network devices to use struct device instead of class_device.  Greg
missed this one in his cleanup path.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

diff --git a/drivers/net/gianfar_sysfs.c b/drivers/net/gianfar_sysfs.c
index 9dd387f..6e2166a 100644
--- a/drivers/net/gianfar_sysfs.c
+++ b/drivers/net/gianfar_sysfs.c
@@ -39,13 +39,15 @@
 #include "gianfar.h"
 
 #define GFAR_ATTR(_name) \
-static ssize_t gfar_show_##_name(struct class_device *cdev, char *buf); \
-static ssize_t gfar_set_##_name(struct class_device *cdev, \
+static ssize_t gfar_show_##_name(struct device *dev, \
+	 struct device_attribute *attr, char *buf); \
+static ssize_t gfar_set_##_name(struct device *dev, \
+		struct device_attribute *attr, \
 		const char *buf, size_t count); \
-static CLASS_DEVICE_ATTR(_name, 0644, gfar_show_##_name, gfar_set_##_name)
+static DEVICE_ATTR(_name, 0644, gfar_show_##_name, gfar_set_##_name)
 
 #define GFAR_CREATE_FILE(_dev, _name) \
-	class_device_create_file(&_dev->class_dev, &class_device_attr_##_name)
+	device_create_file(&_dev->dev, &dev_attr_##_name)
 
 GFAR_ATTR(bd_stash);
 GFAR_ATTR(rx_stash_size);
@@ -54,29 +56,28 @@ GFAR_ATTR(fifo_threshold);
 GFAR_ATTR(fifo_starve);
 GFAR_ATTR(fifo_starve_off);
 
-#define to_net_dev(cd) container_of(cd, struct net_device, class_dev)
-
-static ssize_t gfar_show_bd_stash(struct class_device *cdev, char *buf)
+static ssize_t gfar_show_bd_stash(struct device *dev,
+				  struct device_attribute *attr, char *buf)
 {
-	struct net_device *dev = to_net_dev(cdev);
-	struct gfar_private *priv = netdev_priv(dev);
+	struct gfar_private *priv = netdev_priv(to_net_dev(dev));
 
-	return sprintf(buf, "%s\n", priv->bd_stash_en? "on" : "off");
+	return sprintf(buf, "%s\n", priv->bd_stash_en ? "on" : "off");
 }
 
-static ssize_t gfar_set_bd_stash(struct class_device *cdev,
-		const char *buf, size_t count)
+static ssize_t gfar_set_bd_stash(struct device *dev,
+				 struct device_attribute *attr,
+				 const char *buf, size_t count)
 {
-	struct net_device *dev = to_net_dev(cdev);
-	struct gfar_private *priv = netdev_priv(dev);
+	struct gfar_private *priv = netdev_priv(to_net_dev(dev));
 	int new_setting = 0;
 	u32 temp;
 	unsigned long flags;
 
 	/* Find out the new setting */
-	if (!strncmp("on", buf, count-1) || !strncmp("1", buf, count-1))
+	if (!strncmp("on", buf, count - 1) || !strncmp("1", buf, count - 1))
 		new_setting = 1;
-	else if (!strncmp("off", buf, count-1) || !strncmp("0", buf, count-1))
+	else if (!strncmp("off", buf, count - 1)
+		 || !strncmp("0", buf, count - 1))
 		new_setting = 0;
 	else
 		return count;
@@ -100,19 +101,19 @@ static ssize_t gfar_set_bd_stash(struct class_device *cdev,
 	return count;
 }
 
-static ssize_t gfar_show_rx_stash_size(struct class_device *cdev, char *buf)
+static ssize_t gfar_show_rx_stash_size(struct device *dev,
+				       struct device_attribute *attr, char *buf)
 {
-	struct net_device *dev = to_net_dev(cdev);
-	struct gfar_private *priv = netdev_priv(dev);
+	struct gfar_private *priv = netdev_priv(to_net_dev(dev));
 
 	return sprintf(buf, "%d\n", priv->rx_stash_size);
 }
 
-static ssize_t gfar_set_rx_stash_size(struct class_device *cdev,
-		const char *buf, size_t count)
+static ssize_t gfar_set_rx_stash_size(struct device *dev,
+				      struct device_attribute *attr,
+				      const char *buf, size_t count)
 {
-	struct net_device *dev = to_net_dev(cdev);
-	struct gfar_private *priv = netdev_priv(dev);
+	struct gfar_private *priv = netdev_priv(to_net_dev(dev));
 	unsigned int length = simple_strtoul(buf, NULL, 0);
 	u32 temp;
 	unsigned long flags;
@@ -146,21 +147,21 @@ static ssize_t gfar_set_rx_stash_size(struct class_device *cdev,
 	return count;
 }
 
-
 /* Stashing will only be enabled when rx_stash_size != 0 */
-static ssize_t gfar_show_rx_stash_index(struct class_device *cdev, char *buf)
+static ssize_t gfar_show_rx_stash_index(struct device *dev,
+					struct device_attribute *attr,
+					char *buf)
 {
-	struct net_device *dev = to_net_dev(cdev);
-	struct gfar_private *priv = netdev_priv(dev);
+	struct gfar_private *priv = netdev_priv(to_net_dev(dev));
 
 	return sprintf(buf, "%d\n", priv->rx_stash_index);
 }
 
-static ssize_t gfar_set_rx_stash_index(struct class_device *cdev,
-		const char *buf, size_t count)
+static ssize_t gfar_set_rx_stash_index(struct device *dev,
+				       struct device_attribute *attr,
+				       const char *buf, size_t count)
 {
-	struct net_device *dev = to_net_dev(cdev);
-	struct gfar_private *priv = netdev_priv(dev);
+	struct gfar_private *priv = netdev_priv(to_net_dev(dev));
 	unsigned short index = simple_strtoul(buf, NULL, 0);
 	u32 temp;
 	unsigned long flags;
@@ -184,19 +185,20 @@ static ssize_t gfar_set_rx_stash_index(struct class_device *cdev,
 	return count;
 }
 
-static ssize_t gfar_show_fifo_threshold(struct class_device *cdev, char *buf)
+static ssize_t gfar_show_fifo_threshold(struct device *dev,
+					struct device_attribute *attr,
+					char *buf)
 {
-	struct net_device *dev = to_net_dev(cdev);
-	struct gfar_private *priv = netdev_priv(dev);
+	struct gfar_private *priv = netdev_priv(to_net_dev(dev));
 
 	return sprintf(buf, "%d\n", priv->fifo_threshold);
 }
 
-static ssize_t gfar_set_fifo_threshold(struct class_device *cdev,
-		const char *buf, size_t count)
+static ssize_t gfar_set_fifo_threshold(struct device *dev,
+				       struct device_attribute *attr,
+				       const char *buf, size_t count)
 {
-	struct net_device *dev = to_net_dev(cdev);
-	struct gfar_private *priv = netdev_priv(dev);
+	struct gfar_private *priv = netdev_priv(to_net_dev(dev));
 	unsigned int length = simple_strtoul(buf, NULL, 0);
 	u32 temp;
 	unsigned long flags;
@@ -218,20 +220,19 @@ static ssize_t gfar_set_fifo_threshold(struct class_device *cdev,
 	return count;
 }
 
-static ssize_t gfar_show_fifo_starve(struct class_device *cdev, char *buf)
+static ssize_t gfar_show_fifo_starve(struct device *dev,
+				     struct device_attribute *attr, char *buf)
 {
-	struct net_device *dev = to_net_dev(cdev);
-	struct gfar_private *priv = netdev_priv(dev);
+	struct gfar_private *priv = netdev_priv(to_net_dev(dev));
 
 	return sprintf(buf, "%d\n", priv->fifo_starve);
 }
 
-
-static ssize_t gfar_set_fifo_starve(struct class_device *cdev,
-		const char *buf, size_t count)
+static ssize_t gfar_set_fifo_starve(struct device *dev,
+				    struct device_attribute *attr,
+				    const char *buf, size_t count)
 {
-	struct net_device *dev = to_net_dev(cdev);
-	struct gfar_private *priv = netdev_priv(dev);
+	struct gfar_private *priv = netdev_priv(to_net_dev(dev));
 	unsigned int num = simple_strtoul(buf, NULL, 0);
 	u32 temp;
 	unsigned long flags;
@@ -253,19 +254,20 @@ static ssize_t gfar_set_fifo_starve(struct class_device *cdev,
 	return count;
 }
 
-static ssize_t gfar_show_fifo_starve_off(struct class_device *cdev, char *buf)
+static ssize_t gfar_show_fifo_starve_off(struct device *dev,
+					 struct device_attribute *attr,
+					 char *buf)
 {
-	struct net_device *dev = to_net_dev(cdev);
-	struct gfar_private *priv = netdev_priv(dev);
+	struct gfar_private *priv = netdev_priv(to_net_dev(dev));
 
 	return sprintf(buf, "%d\n", priv->fifo_starve_off);
 }
 
-static ssize_t gfar_set_fifo_starve_off(struct class_device *cdev,
-		const char *buf, size_t count)
+static ssize_t gfar_set_fifo_starve_off(struct device *dev,
+					struct device_attribute *attr,
+					const char *buf, size_t count)
 {
-	struct net_device *dev = to_net_dev(cdev);
-	struct gfar_private *priv = netdev_priv(dev);
+	struct gfar_private *priv = netdev_priv(to_net_dev(dev));
 	unsigned int num = simple_strtoul(buf, NULL, 0);
 	u32 temp;
 	unsigned long flags;
-- 
cgit v0.10.2


From 76884679c644a34ead40d74f4df6075a61d51990 Mon Sep 17 00:00:00 2001
From: Andy Fleming <afleming@freescale.com>
Date: Fri, 9 Feb 2007 18:13:58 -0600
Subject: phylib: Add support for Marvell 88e1111S and 88e1145

Changes include:
* New support for 88e1145
* New support for 88e111s
* Fixing 88e1101 driver to not match non-88e1101 PHYs
* Increases in feature support across Marvell PHY product line
* Fixes a bunch of whitespace issues found by Lindent

Signed-off-by: Andrew Fleming <afleming@freescale.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

diff --git a/drivers/net/phy/marvell.c b/drivers/net/phy/marvell.c
index f4d4eb6..22aec5c 100644
--- a/drivers/net/phy/marvell.c
+++ b/drivers/net/phy/marvell.c
@@ -42,6 +42,19 @@
 #define MII_M1011_IMASK_INIT		0x6400
 #define MII_M1011_IMASK_CLEAR		0x0000
 
+#define MII_M1011_PHY_SCR		0x10
+#define MII_M1011_PHY_SCR_AUTO_CROSS	0x0060
+
+#define MII_M1145_PHY_EXT_CR		0x14
+#define MII_M1145_RGMII_RX_DELAY	0x0080
+#define MII_M1145_RGMII_TX_DELAY	0x0002
+
+#define M1145_DEV_FLAGS_RESISTANCE	0x00000001
+
+#define MII_M1111_PHY_LED_CONTROL	0x18
+#define MII_M1111_PHY_LED_DIRECT	0x4100
+#define MII_M1111_PHY_LED_COMBINE	0x411c
+
 MODULE_DESCRIPTION("Marvell PHY driver");
 MODULE_AUTHOR("Andy Fleming");
 MODULE_LICENSE("GPL");
@@ -63,7 +76,7 @@ static int marvell_config_intr(struct phy_device *phydev)
 {
 	int err;
 
-	if(phydev->interrupts == PHY_INTERRUPT_ENABLED)
+	if (phydev->interrupts == PHY_INTERRUPT_ENABLED)
 		err = phy_write(phydev, MII_M1011_IMASK, MII_M1011_IMASK_INIT);
 	else
 		err = phy_write(phydev, MII_M1011_IMASK, MII_M1011_IMASK_CLEAR);
@@ -103,34 +116,153 @@ static int marvell_config_aneg(struct phy_device *phydev)
 	if (err < 0)
 		return err;
 
+	err = phy_write(phydev, MII_M1011_PHY_SCR,
+			MII_M1011_PHY_SCR_AUTO_CROSS);
+	if (err < 0)
+		return err;
+
+	err = phy_write(phydev, MII_M1111_PHY_LED_CONTROL,
+			MII_M1111_PHY_LED_DIRECT);
+	if (err < 0)
+		return err;
 
 	err = genphy_config_aneg(phydev);
 
 	return err;
 }
 
+static int m88e1145_config_init(struct phy_device *phydev)
+{
+	int err;
+
+	/* Take care of errata E0 & E1 */
+	err = phy_write(phydev, 0x1d, 0x001b);
+	if (err < 0)
+		return err;
+
+	err = phy_write(phydev, 0x1e, 0x418f);
+	if (err < 0)
+		return err;
+
+	err = phy_write(phydev, 0x1d, 0x0016);
+	if (err < 0)
+		return err;
+
+	err = phy_write(phydev, 0x1e, 0xa2da);
+	if (err < 0)
+		return err;
+
+	if (phydev->interface == PHY_INTERFACE_MODE_RGMII) {
+		int temp = phy_read(phydev, MII_M1145_PHY_EXT_CR);
+		if (temp < 0)
+			return temp;
+
+		temp |= (MII_M1145_RGMII_RX_DELAY | MII_M1145_RGMII_TX_DELAY);
+
+		err = phy_write(phydev, MII_M1145_PHY_EXT_CR, temp);
+		if (err < 0)
+			return err;
+
+		if (phydev->dev_flags & M1145_DEV_FLAGS_RESISTANCE) {
+			err = phy_write(phydev, 0x1d, 0x0012);
+			if (err < 0)
+				return err;
+
+			temp = phy_read(phydev, 0x1e);
+			if (temp < 0)
+				return temp;
+
+			temp &= 0xf03f;
+			temp |= 2 << 9;	/* 36 ohm */
+			temp |= 2 << 6;	/* 39 ohm */
+
+			err = phy_write(phydev, 0x1e, temp);
+			if (err < 0)
+				return err;
+
+			err = phy_write(phydev, 0x1d, 0x3);
+			if (err < 0)
+				return err;
+
+			err = phy_write(phydev, 0x1e, 0x8000);
+			if (err < 0)
+				return err;
+		}
+	}
+
+	return 0;
+}
 
 static struct phy_driver m88e1101_driver = {
-	.phy_id		= 0x01410c00,
-	.phy_id_mask	= 0xffffff00,
-	.name		= "Marvell 88E1101",
-	.features	= PHY_GBIT_FEATURES,
-	.flags		= PHY_HAS_INTERRUPT,
-	.config_aneg	= &marvell_config_aneg,
-	.read_status	= &genphy_read_status,
-	.ack_interrupt	= &marvell_ack_interrupt,
-	.config_intr	= &marvell_config_intr,
-	.driver 	= { .owner = THIS_MODULE,},
+	.phy_id = 0x01410c60,
+	.phy_id_mask = 0xfffffff0,
+	.name = "Marvell 88E1101",
+	.features = PHY_GBIT_FEATURES,
+	.flags = PHY_HAS_INTERRUPT,
+	.config_aneg = &marvell_config_aneg,
+	.read_status = &genphy_read_status,
+	.ack_interrupt = &marvell_ack_interrupt,
+	.config_intr = &marvell_config_intr,
+	.driver = {.owner = THIS_MODULE,},
+};
+
+static struct phy_driver m88e1111s_driver = {
+	.phy_id = 0x01410cc0,
+	.phy_id_mask = 0xfffffff0,
+	.name = "Marvell 88E1111",
+	.features = PHY_GBIT_FEATURES,
+	.flags = PHY_HAS_INTERRUPT,
+	.config_aneg = &marvell_config_aneg,
+	.read_status = &genphy_read_status,
+	.ack_interrupt = &marvell_ack_interrupt,
+	.config_intr = &marvell_config_intr,
+	.driver = {.owner = THIS_MODULE,},
+};
+
+static struct phy_driver m88e1145_driver = {
+	.phy_id = 0x01410cd0,
+	.phy_id_mask = 0xfffffff0,
+	.name = "Marvell 88E1145",
+	.features = PHY_GBIT_FEATURES,
+	.flags = PHY_HAS_INTERRUPT,
+	.config_init = &m88e1145_config_init,
+	.config_aneg = &marvell_config_aneg,
+	.read_status = &genphy_read_status,
+	.ack_interrupt = &marvell_ack_interrupt,
+	.config_intr = &marvell_config_intr,
+	.driver = {.owner = THIS_MODULE,},
 };
 
 static int __init marvell_init(void)
 {
-	return phy_driver_register(&m88e1101_driver);
+	int ret;
+
+	ret = phy_driver_register(&m88e1101_driver);
+	if (ret)
+		return ret;
+
+	ret = phy_driver_register(&m88e1111s_driver);
+	if (ret)
+		goto err1111s;
+
+	ret = phy_driver_register(&m88e1145_driver);
+	if (ret)
+		goto err1145;
+
+	return 0;
+
+      err1145:
+	phy_driver_unregister(&m88e1111s_driver);
+      err1111s:
+	phy_driver_unregister(&m88e1101_driver);
+	return ret;
 }
 
 static void __exit marvell_exit(void)
 {
 	phy_driver_unregister(&m88e1101_driver);
+	phy_driver_unregister(&m88e1111s_driver);
+	phy_driver_unregister(&m88e1145_driver);
 }
 
 module_init(marvell_init);
-- 
cgit v0.10.2


From e363d138ed37138eb6c892b4195fa2d03fb33af6 Mon Sep 17 00:00:00 2001
From: Komuro <komurojun-mbn@nifty.com>
Date: Sat, 10 Feb 2007 11:57:35 +0900
Subject: PCMCIA-NETDEV : the 2nd argument of el3_interrrupt and smc_interrupt
 is struct net_device*

Signed-off-by: Komuro <komurojun-mbn@nifty.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

diff --git a/drivers/net/pcmcia/3c574_cs.c b/drivers/net/pcmcia/3c574_cs.c
index 448bf4a..c7bd9c1 100644
--- a/drivers/net/pcmcia/3c574_cs.c
+++ b/drivers/net/pcmcia/3c574_cs.c
@@ -915,7 +915,7 @@ static void media_check(unsigned long arg)
 	if ((inw(ioaddr + EL3_STATUS) & IntLatch) && (inb(ioaddr + Timer) == 0xff)) {
 		if (!lp->fast_poll)
 			printk(KERN_INFO "%s: interrupt(s) dropped!\n", dev->name);
-		el3_interrupt(dev->irq, lp);
+		el3_interrupt(dev->irq, dev);
 		lp->fast_poll = HZ;
 	}
 	if (lp->fast_poll) {
diff --git a/drivers/net/pcmcia/smc91c92_cs.c b/drivers/net/pcmcia/smc91c92_cs.c
index 530df88..2561f76 100644
--- a/drivers/net/pcmcia/smc91c92_cs.c
+++ b/drivers/net/pcmcia/smc91c92_cs.c
@@ -1927,7 +1927,7 @@ static void media_check(u_long arg)
     if (smc->watchdog++ && ((i>>8) & i)) {
 	if (!smc->fast_poll)
 	    printk(KERN_INFO "%s: interrupt(s) dropped!\n", dev->name);
-	smc_interrupt(dev->irq, smc);
+	smc_interrupt(dev->irq, dev);
 	smc->fast_poll = HZ;
     }
     if (smc->fast_poll) {
-- 
cgit v0.10.2


From a1ca14b1f4ff62e14e5c23dbbfee41ab73d29f82 Mon Sep 17 00:00:00 2001
From: Jay Cliburn <jacliburn@bellsouth.net>
Date: Wed, 14 Feb 2007 20:12:13 -0600
Subject: atl1: drop NET_PCI from Kconfig

The atl1 driver doesn't need NET_PCI.  Remove it from Kconfig.
Noticed by Chad Sprouse.

Signed-off-by: Jay Cliburn <jacliburn@bellsouth.net>
Signed-off-by: Chris Snook <csnook@redhat.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 38f41a5..9603126 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -2337,7 +2337,7 @@ config QLA3XXX
 
 config ATL1
 	tristate "Attansic L1 Gigabit Ethernet support (EXPERIMENTAL)"
-	depends on NET_PCI && PCI && EXPERIMENTAL
+	depends on PCI && EXPERIMENTAL
 	select CRC32
 	select MII
 	help
-- 
cgit v0.10.2


From a62daa4c7544a0f0ca94d61458e3f78f630e0c05 Mon Sep 17 00:00:00 2001
From: Al Viro <viro@zeniv.linux.org.uk>
Date: Wed, 14 Feb 2007 20:13:39 -0600
Subject: atl1: fix bad ioread address

An ioread32 statement reads the wrong address.  Fix it.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Jay Cliburn <jacliburn@bellsouth.net>
Signed-off-by: Chris Snook <csnook@redhat.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

diff --git a/drivers/net/atl1/atl1_hw.c b/drivers/net/atl1/atl1_hw.c
index 08b2d78..e28707a 100644
--- a/drivers/net/atl1/atl1_hw.c
+++ b/drivers/net/atl1/atl1_hw.c
@@ -357,7 +357,7 @@ void atl1_hash_set(struct atl1_hw *hw, u32 hash_value)
 	 */
 	hash_reg = (hash_value >> 31) & 0x1;
 	hash_bit = (hash_value >> 26) & 0x1F;
-	mta = ioread32((hw + REG_RX_HASH_TABLE) + (hash_reg << 2));
+	mta = ioread32((hw->hw_addr + REG_RX_HASH_TABLE) + (hash_reg << 2));
 	mta |= (1 << hash_bit);
 	iowrite32(mta, (hw->hw_addr + REG_RX_HASH_TABLE) + (hash_reg << 2));
 }
-- 
cgit v0.10.2


From fd8c5a7da3c48e53c7859d9f0c1d82ba02ca0a20 Mon Sep 17 00:00:00 2001
From: Jay Cliburn <jacliburn@bellsouth.net>
Date: Wed, 14 Feb 2007 20:14:55 -0600
Subject: atl1: read MAC address from register

On some Asus motherboards containing the L1 NIC, the MAC address is
written by the BIOS directly to the MAC register during POST, and is
not stored in eeprom.  If we don't succeed in fetching the MAC address
from eeprom or spi, try reading it directly from the MAC register.
Suggested by Xiong Huang.

And do some cleanup while we've got the hood up...

Signed-off-by: Jay Cliburn <jacliburn@bellsouth.net>
Signed-off-by: Chris Snook <csnook@redhat.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

diff --git a/drivers/net/atl1/atl1_hw.c b/drivers/net/atl1/atl1_hw.c
index e28707a..314dbaa 100644
--- a/drivers/net/atl1/atl1_hw.c
+++ b/drivers/net/atl1/atl1_hw.c
@@ -243,14 +243,8 @@ static int atl1_get_permanent_address(struct atl1_hw *hw)
 			i += 4;
 		}
 
-/*
- * The following 2 lines are the Attansic originals.  Saving for posterity.
- *		*(u32 *) & eth_addr[2] = LONGSWAP(addr[0]);
- *		*(u16 *) & eth_addr[0] = SHORTSWAP(*(u16 *) & addr[1]);
- */
-		*(u32 *) & eth_addr[2] = swab32(addr[0]);
-		*(u16 *) & eth_addr[0] = swab16(*(u16 *) & addr[1]);
-
+		*(u32 *) &eth_addr[2] = swab32(addr[0]);
+		*(u16 *) &eth_addr[0] = swab16(*(u16 *) &addr[1]);
 		if (is_valid_ether_addr(eth_addr)) {
 			memcpy(hw->perm_mac_addr, eth_addr, ETH_ALEN);
 			return 0;
@@ -281,17 +275,28 @@ static int atl1_get_permanent_address(struct atl1_hw *hw)
 		i += 4;
 	}
 
-/*
- * The following 2 lines are the Attansic originals.  Saving for posterity.
- *	*(u32 *) & eth_addr[2] = LONGSWAP(addr[0]);
- *	*(u16 *) & eth_addr[0] = SHORTSWAP(*(u16 *) & addr[1]);
- */
-	*(u32 *) & eth_addr[2] = swab32(addr[0]);
-	*(u16 *) & eth_addr[0] = swab16(*(u16 *) & addr[1]);
+	*(u32 *) &eth_addr[2] = swab32(addr[0]);
+	*(u16 *) &eth_addr[0] = swab16(*(u16 *) &addr[1]);
 	if (is_valid_ether_addr(eth_addr)) {
 		memcpy(hw->perm_mac_addr, eth_addr, ETH_ALEN);
 		return 0;
 	}
+
+	/*
+	 * On some motherboards, the MAC address is written by the
+	 * BIOS directly to the MAC register during POST, and is
+	 * not stored in eeprom.  If all else thus far has failed
+	 * to fetch the permanent MAC address, try reading it directly.
+	 */
+	addr[0] = ioread32(hw->hw_addr + REG_MAC_STA_ADDR);
+	addr[1] = ioread16(hw->hw_addr + (REG_MAC_STA_ADDR + 4));
+	*(u32 *) &eth_addr[2] = swab32(addr[0]);
+	*(u16 *) &eth_addr[0] = swab16(*(u16 *) &addr[1]);
+	if (is_valid_ether_addr(eth_addr)) {
+		memcpy(hw->perm_mac_addr, eth_addr, ETH_ALEN);
+		return 0;
+	}
+
 	return 1;
 }
 
-- 
cgit v0.10.2


From f1e5a1a00d3991eabda41dde69d1905cad4980a0 Mon Sep 17 00:00:00 2001
From: Chris Snook <csnook@redhat.com>
Date: Wed, 14 Feb 2007 20:16:00 -0600
Subject: atl1: remove unused define

Remove unused define from atl1_main.c.

Signed-off-by: Chris Snook <csnook@redhat.com>
Signed-off-by: Jay Cliburn <jacliburn@bellsouth.net>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

diff --git a/drivers/net/atl1/atl1_main.c b/drivers/net/atl1/atl1_main.c
index 6655640..abce97e 100644
--- a/drivers/net/atl1/atl1_main.c
+++ b/drivers/net/atl1/atl1_main.c
@@ -82,7 +82,6 @@
 
 #include "atl1.h"
 
-#define RUN_REALTIME 0
 #define DRIVER_VERSION "2.0.6"
 
 char atl1_driver_name[] = "atl1";
-- 
cgit v0.10.2


From e81e557a8f1e22fab1b1bdc649ac0d24017ddce2 Mon Sep 17 00:00:00 2001
From: Chris Snook <csnook@redhat.com>
Date: Wed, 14 Feb 2007 20:17:01 -0600
Subject: atl1: add L1 device id to pci_ids, then use it

Add device id for the Attansic L1 chip to pci_ids.h, then use it.

Signed-off-by: Chris Snook <csnook@redhat.com>
Signed-off-by: Jay Cliburn <jacliburn@bellsouth.net>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

diff --git a/drivers/net/atl1/atl1_main.c b/drivers/net/atl1/atl1_main.c
index abce97e..09f3375 100644
--- a/drivers/net/atl1/atl1_main.c
+++ b/drivers/net/atl1/atl1_main.c
@@ -99,7 +99,7 @@ MODULE_VERSION(DRIVER_VERSION);
  * atl1_pci_tbl - PCI Device ID Table
  */
 static const struct pci_device_id atl1_pci_tbl[] = {
-	{PCI_DEVICE(PCI_VENDOR_ID_ATTANSIC, 0x1048)},
+	{PCI_DEVICE(PCI_VENDOR_ID_ATTANSIC, PCI_DEVICE_ID_ATTANSIC_L1)},
 	/* required last entry */
 	{0,}
 };
diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h
index 182a96f..600308f 100644
--- a/include/linux/pci_ids.h
+++ b/include/linux/pci_ids.h
@@ -2089,6 +2089,7 @@
 #define PCI_VENDOR_ID_PASEMI		0x1959
 
 #define PCI_VENDOR_ID_ATTANSIC		0x1969
+#define PCI_DEVICE_ID_ATTANSIC_L1	0x1048
 
 #define PCI_VENDOR_ID_JMICRON		0x197B
 #define PCI_DEVICE_ID_JMICRON_JMB360	0x2360
-- 
cgit v0.10.2


From 9cc6d14e90c36eccf371d3c477211594bc274d0a Mon Sep 17 00:00:00 2001
From: Jay Cliburn <jacliburn@bellsouth.net>
Date: Wed, 14 Feb 2007 20:18:05 -0600
Subject: atl1: bump version number

Bump the version number.

Signed-off-by: Jay Cliburn <jacliburn@bellsouth.net>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

diff --git a/drivers/net/atl1/atl1_main.c b/drivers/net/atl1/atl1_main.c
index 09f3375..6567348 100644
--- a/drivers/net/atl1/atl1_main.c
+++ b/drivers/net/atl1/atl1_main.c
@@ -82,7 +82,7 @@
 
 #include "atl1.h"
 
-#define DRIVER_VERSION "2.0.6"
+#define DRIVER_VERSION "2.0.7"
 
 char atl1_driver_name[] = "atl1";
 static const char atl1_driver_string[] = "Attansic L1 Ethernet Network Driver";
-- 
cgit v0.10.2


From 11cc3bb522ddb3962fb7134ffc5e27c487746193 Mon Sep 17 00:00:00 2001
From: Richard Knutsson <ricknu-0@student.ltu.se>
Date: Wed, 14 Feb 2007 01:40:21 +0100
Subject: net/wan/pc300too.c: pci_module_init to pci_register_driver

Convert pci_module_init() to pci_register_driver().

Signed-off-by: Richard Knutsson <ricknu-0@student.ltu.se>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

diff --git a/drivers/net/wan/pc300too.c b/drivers/net/wan/pc300too.c
index bc156b5..aff05db 100644
--- a/drivers/net/wan/pc300too.c
+++ b/drivers/net/wan/pc300too.c
@@ -542,7 +542,7 @@ static int __init pc300_init_module(void)
 
 	CLOCK_BASE = use_crystal_clock ? 24576000 : pci_clock_freq;
 
-	return pci_module_init(&pc300_pci_driver);
+	return pci_register_driver(&pc300_pci_driver);
 }
 
 
-- 
cgit v0.10.2


From 825811749b00f670b53e35ed342d5dc10d71c9de Mon Sep 17 00:00:00 2001
From: "Amit S. Kale" <amitkale@netxen.com>
Date: Mon, 12 Feb 2007 04:33:38 -0800
Subject: NetXen: Fix to get the driver working after sparse changes

Signed-off-by: Amit S. Kale <amitkale@netxen.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

diff --git a/drivers/net/netxen/netxen_nic.h b/drivers/net/netxen/netxen_nic.h
index e021a30..2807ef4 100644
--- a/drivers/net/netxen/netxen_nic.h
+++ b/drivers/net/netxen/netxen_nic.h
@@ -252,7 +252,7 @@ typedef u32 netxen_ctx_msg;
 #define netxen_set_msg_ctxid(config_word, val)	\
 	((config_word) &= ~(0x3ff<<18), (config_word) |= (val & 0x3ff) << 18)
 #define netxen_set_msg_opcode(config_word, val)	\
-	((config_word) &= ~(0xf<<24), (config_word) |= (val & 0xf) << 24)
+	((config_word) &= ~(0xf<<28), (config_word) |= (val & 0xf) << 28)
 
 struct netxen_rcv_context {
 	__le64 rcv_ring_addr;
@@ -303,14 +303,14 @@ struct netxen_ring_ctx {
 	(cmd_desc)->flags_opcode |= cpu_to_le16((val) & 0x7f))
 #define netxen_set_cmd_desc_opcode(cmd_desc, val)	\
 	((cmd_desc)->flags_opcode &= ~cpu_to_le16(0x3f<<7), \
-	(cmd_desc)->flags_opcode |= cpu_to_le16((val) & (0x3f<<7)))
+	(cmd_desc)->flags_opcode |= cpu_to_le16(((val & 0x3f)<<7)))
 
 #define netxen_set_cmd_desc_num_of_buff(cmd_desc, val)	\
 	((cmd_desc)->num_of_buffers_total_length &= ~cpu_to_le32(0xff), \
 	(cmd_desc)->num_of_buffers_total_length |= cpu_to_le32((val) & 0xff))
 #define netxen_set_cmd_desc_totallength(cmd_desc, val)	\
-	((cmd_desc)->num_of_buffers_total_length &= cpu_to_le32(0xff), \
-	(cmd_desc)->num_of_buffers_total_length |= cpu_to_le32(val << 24))
+	((cmd_desc)->num_of_buffers_total_length &= ~cpu_to_le32(0xffffff00), \
+	(cmd_desc)->num_of_buffers_total_length |= cpu_to_le32(val << 8))
 
 #define netxen_get_cmd_desc_opcode(cmd_desc)	\
 	((le16_to_cpu((cmd_desc)->flags_opcode) >> 7) & 0x003F)
-- 
cgit v0.10.2


From 538cc7ee7dddaedf9442f32ec4cc617a070ef341 Mon Sep 17 00:00:00 2001
From: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Date: Thu, 15 Feb 2007 17:56:01 +0400
Subject: gianfar: don't duplicate gfar_error()

It was hardly necessary to repeat most of the code from gfar_error() in
gfar_interrupt(), especially having some inconsistencies between the two.
So, make the gfar_interrupt() just call gfar_error(), and not acknowledge
the interrupts itself as gfar_{receive/transmit/error}() do it anyway.
While at it, also clarify/cleanup debug messages in gfar_error()...

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

diff --git a/drivers/net/gianfar.c b/drivers/net/gianfar.c
index 1be4a84..1f83988 100644
--- a/drivers/net/gianfar.c
+++ b/drivers/net/gianfar.c
@@ -10,6 +10,7 @@
  * Maintainer: Kumar Gala
  *
  * Copyright (c) 2002-2006 Freescale Semiconductor, Inc.
+ * Copyright (c) 2007 MontaVista Software, Inc.
  *
  * This program is free software; you can redistribute  it and/or modify it
  * under  the terms of  the GNU General  Public License as published by the
@@ -1612,71 +1613,17 @@ static irqreturn_t gfar_interrupt(int irq, void *dev_id)
 	/* Save ievent for future reference */
 	u32 events = gfar_read(&priv->regs->ievent);
 
-	/* Clear IEVENT */
-	gfar_write(&priv->regs->ievent, events);
-
 	/* Check for reception */
-	if ((events & IEVENT_RXF0) || (events & IEVENT_RXB0))
+	if (events & IEVENT_RX_MASK)
 		gfar_receive(irq, dev_id);
 
 	/* Check for transmit completion */
-	if ((events & IEVENT_TXF) || (events & IEVENT_TXB))
+	if (events & IEVENT_TX_MASK)
 		gfar_transmit(irq, dev_id);
 
-	/* Update error statistics */
-	if (events & IEVENT_TXE) {
-		priv->stats.tx_errors++;
-
-		if (events & IEVENT_LC)
-			priv->stats.tx_window_errors++;
-		if (events & IEVENT_CRL)
-			priv->stats.tx_aborted_errors++;
-		if (events & IEVENT_XFUN) {
-			if (netif_msg_tx_err(priv))
-				printk(KERN_WARNING "%s: tx underrun. dropped packet\n", dev->name);
-			priv->stats.tx_dropped++;
-			priv->extra_stats.tx_underrun++;
-
-			/* Reactivate the Tx Queues */
-			gfar_write(&priv->regs->tstat, TSTAT_CLEAR_THALT);
-		}
-	}
-	if (events & IEVENT_BSY) {
-		priv->stats.rx_errors++;
-		priv->extra_stats.rx_bsy++;
-
-		gfar_receive(irq, dev_id);
-
-#ifndef CONFIG_GFAR_NAPI
-		/* Clear the halt bit in RSTAT */
-		gfar_write(&priv->regs->rstat, RSTAT_CLEAR_RHALT);
-#endif
-
-		if (netif_msg_rx_err(priv))
-			printk(KERN_DEBUG "%s: busy error (rhalt: %x)\n",
-					dev->name,
-					gfar_read(&priv->regs->rstat));
-	}
-	if (events & IEVENT_BABR) {
-		priv->stats.rx_errors++;
-		priv->extra_stats.rx_babr++;
-
-		if (netif_msg_rx_err(priv))
-			printk(KERN_DEBUG "%s: babbling error\n", dev->name);
-	}
-	if (events & IEVENT_EBERR) {
-		priv->extra_stats.eberr++;
-		if (netif_msg_rx_err(priv))
-			printk(KERN_DEBUG "%s: EBERR\n", dev->name);
-	}
-	if ((events & IEVENT_RXC) && (netif_msg_rx_err(priv)))
-			printk(KERN_DEBUG "%s: control frame\n", dev->name);
-
-	if (events & IEVENT_BABT) {
-		priv->extra_stats.tx_babt++;
-		if (netif_msg_rx_err(priv))
-			printk(KERN_DEBUG "%s: babt error\n", dev->name);
-	}
+	/* Check for errors */
+	if (events & IEVENT_ERR_MASK)
+		gfar_error(irq, dev_id);
 
 	return IRQ_HANDLED;
 }
@@ -1938,7 +1885,7 @@ static irqreturn_t gfar_error(int irq, void *dev_id)
 	/* Hmm... */
 	if (netif_msg_rx_err(priv) || netif_msg_tx_err(priv))
 		printk(KERN_DEBUG "%s: error interrupt (ievent=0x%08x imask=0x%08x)\n",
-				dev->name, events, gfar_read(&priv->regs->imask));
+		       dev->name, events, gfar_read(&priv->regs->imask));
 
 	/* Update the error counters */
 	if (events & IEVENT_TXE) {
@@ -1950,8 +1897,8 @@ static irqreturn_t gfar_error(int irq, void *dev_id)
 			priv->stats.tx_aborted_errors++;
 		if (events & IEVENT_XFUN) {
 			if (netif_msg_tx_err(priv))
-				printk(KERN_DEBUG "%s: underrun.  packet dropped.\n",
-						dev->name);
+				printk(KERN_DEBUG "%s: TX FIFO underrun, "
+				       "packet dropped.\n", dev->name);
 			priv->stats.tx_dropped++;
 			priv->extra_stats.tx_underrun++;
 
@@ -1973,30 +1920,28 @@ static irqreturn_t gfar_error(int irq, void *dev_id)
 #endif
 
 		if (netif_msg_rx_err(priv))
-			printk(KERN_DEBUG "%s: busy error (rhalt: %x)\n",
-					dev->name,
-					gfar_read(&priv->regs->rstat));
+			printk(KERN_DEBUG "%s: busy error (rstat: %x)\n",
+			       dev->name, gfar_read(&priv->regs->rstat));
 	}
 	if (events & IEVENT_BABR) {
 		priv->stats.rx_errors++;
 		priv->extra_stats.rx_babr++;
 
 		if (netif_msg_rx_err(priv))
-			printk(KERN_DEBUG "%s: babbling error\n", dev->name);
+			printk(KERN_DEBUG "%s: babbling RX error\n", dev->name);
 	}
 	if (events & IEVENT_EBERR) {
 		priv->extra_stats.eberr++;
 		if (netif_msg_rx_err(priv))
-			printk(KERN_DEBUG "%s: EBERR\n", dev->name);
+			printk(KERN_DEBUG "%s: bus error\n", dev->name);
 	}
 	if ((events & IEVENT_RXC) && netif_msg_rx_status(priv))
-		if (netif_msg_rx_status(priv))
-			printk(KERN_DEBUG "%s: control frame\n", dev->name);
+		printk(KERN_DEBUG "%s: control frame\n", dev->name);
 
 	if (events & IEVENT_BABT) {
 		priv->extra_stats.tx_babt++;
 		if (netif_msg_tx_err(priv))
-			printk(KERN_DEBUG "%s: babt error\n", dev->name);
+			printk(KERN_DEBUG "%s: babbling TX error\n", dev->name);
 	}
 	return IRQ_HANDLED;
 }
-- 
cgit v0.10.2


From 0f4e7b45b99f3bf437bc73997fb861cd039ffeb6 Mon Sep 17 00:00:00 2001
From: Steve Wise <swise@opengridcomputing.com>
Date: Thu, 15 Feb 2007 13:53:09 -0600
Subject: cxgb3 Fix copyrights in the cxgb3 driver.

Fix copyrights in the cxgb3 driver.

Remove the Open Grid Computing copyright.  It shouldn't be there.

Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

diff --git a/drivers/net/cxgb3/cxgb3_defs.h b/drivers/net/cxgb3/cxgb3_defs.h
index 16e0049..e14862b 100644
--- a/drivers/net/cxgb3/cxgb3_defs.h
+++ b/drivers/net/cxgb3/cxgb3_defs.h
@@ -1,6 +1,5 @@
 /*
  * Copyright (c) 2006-2007 Chelsio, Inc. All rights reserved.
- * Copyright (c) 2006-2007 Open Grid Computing, Inc. All rights reserved.
  *
  * This software is available to you under a choice of one of two
  * licenses.  You may choose to be licensed under the terms of the GNU
diff --git a/drivers/net/cxgb3/cxgb3_offload.c b/drivers/net/cxgb3/cxgb3_offload.c
index c6b7266..b2cf5f6 100644
--- a/drivers/net/cxgb3/cxgb3_offload.c
+++ b/drivers/net/cxgb3/cxgb3_offload.c
@@ -1,6 +1,5 @@
 /*
  * Copyright (c) 2006-2007 Chelsio, Inc. All rights reserved.
- * Copyright (c) 2006-2007 Open Grid Computing, Inc. All rights reserved.
  *
  * This software is available to you under a choice of one of two
  * licenses.  You may choose to be licensed under the terms of the GNU
diff --git a/drivers/net/cxgb3/cxgb3_offload.h b/drivers/net/cxgb3/cxgb3_offload.h
index 0e6beb6..f15446a 100644
--- a/drivers/net/cxgb3/cxgb3_offload.h
+++ b/drivers/net/cxgb3/cxgb3_offload.h
@@ -1,6 +1,5 @@
 /*
  * Copyright (c) 2006-2007 Chelsio, Inc. All rights reserved.
- * Copyright (c) 2006-2007 Open Grid Computing, Inc. All rights reserved.
  *
  * This software is available to you under a choice of one of two
  * licenses.  You may choose to be licensed under the terms of the GNU
diff --git a/drivers/net/cxgb3/l2t.c b/drivers/net/cxgb3/l2t.c
index 3c0cb85..d660af7 100644
--- a/drivers/net/cxgb3/l2t.c
+++ b/drivers/net/cxgb3/l2t.c
@@ -1,6 +1,5 @@
 /*
  * Copyright (c) 2003-2007 Chelsio, Inc. All rights reserved.
- * Copyright (c) 2006-2007 Open Grid Computing, Inc. All rights reserved.
  *
  * This software is available to you under a choice of one of two
  * licenses.  You may choose to be licensed under the terms of the GNU
diff --git a/drivers/net/cxgb3/l2t.h b/drivers/net/cxgb3/l2t.h
index ba5d2cb..d790013 100644
--- a/drivers/net/cxgb3/l2t.h
+++ b/drivers/net/cxgb3/l2t.h
@@ -1,6 +1,5 @@
 /*
  * Copyright (c) 2003-2007 Chelsio, Inc. All rights reserved.
- * Copyright (c) 2006-2007 Open Grid Computing, Inc. All rights reserved.
  *
  * This software is available to you under a choice of one of two
  * licenses.  You may choose to be licensed under the terms of the GNU
diff --git a/drivers/net/cxgb3/t3cdev.h b/drivers/net/cxgb3/t3cdev.h
index 9af3bcd..fa4099b 100644
--- a/drivers/net/cxgb3/t3cdev.h
+++ b/drivers/net/cxgb3/t3cdev.h
@@ -1,6 +1,5 @@
 /*
  * Copyright (C) 2006-2007 Chelsio Communications.  All rights reserved.
- * Copyright (C) 2006-2007 Open Grid Computing, Inc.  All rights reserved.
  *
  * This software is available to you under a choice of one of two
  * licenses.  You may choose to be licensed under the terms of the GNU
-- 
cgit v0.10.2


From 7e7c0982218a70d9bab06efcae66d02f172260e7 Mon Sep 17 00:00:00 2001
From: Stephen Hemminger <shemminger@linux-foundation.org>
Date: Thu, 15 Feb 2007 16:40:30 -0800
Subject: sky2: dont flush good pause frames

Don't mark pause frames as errors. This problem caused transmitter not
to pause and would effectively take out a gigabit switch because the
it can't handle overrun.

Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

diff --git a/drivers/net/sky2.h b/drivers/net/sky2.h
index 3b01895..cbca27a 100644
--- a/drivers/net/sky2.h
+++ b/drivers/net/sky2.h
@@ -1589,7 +1589,7 @@ enum {
 
 	GMR_FS_ANY_ERR	= GMR_FS_RX_FF_OV | GMR_FS_CRC_ERR |
 			  GMR_FS_FRAGMENT | GMR_FS_LONG_ERR |
-		  	  GMR_FS_MII_ERR | GMR_FS_GOOD_FC | GMR_FS_BAD_FC |
+		  	  GMR_FS_MII_ERR | GMR_FS_BAD_FC |
 			  GMR_FS_UN_SIZE | GMR_FS_JABBER,
 };
 
-- 
cgit v0.10.2


From 7a7b5181517752005fd0dc822176a6975218ec0f Mon Sep 17 00:00:00 2001
From: Stephen Hemminger <shemminger@linux-foundation.org>
Date: Thu, 15 Feb 2007 16:40:31 -0800
Subject: sky2: no need to reset pause bits on shutdown

Resetting the pause bits on shutdown is not necessary.
The code was inherited from the vendor driver, and it is currently #ifdef'd
out there as well.

Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c
index f2ab3d5..e567996 100644
--- a/drivers/net/sky2.c
+++ b/drivers/net/sky2.c
@@ -1742,13 +1742,6 @@ static void sky2_link_down(struct sky2_port *sky2)
 	reg &= ~(GM_GPCR_RX_ENA | GM_GPCR_TX_ENA);
 	gma_write16(hw, port, GM_GP_CTRL, reg);
 
-	if (sky2->flow_status == FC_RX) {
-		/* restore Asymmetric Pause bit */
-		gm_phy_write(hw, port, PHY_MARV_AUNE_ADV,
-			     gm_phy_read(hw, port, PHY_MARV_AUNE_ADV)
-			     | PHY_M_AN_ASP);
-	}
-
 	netif_carrier_off(sky2->netdev);
 	netif_stop_queue(sky2->netdev);
 
-- 
cgit v0.10.2


From da4c1ff475d82585e3206f0270cb1ba55bcf3c74 Mon Sep 17 00:00:00 2001
From: Stephen Hemminger <shemminger@linux-foundation.org>
Date: Thu, 15 Feb 2007 16:40:32 -0800
Subject: sky2: flow control negotiation for Yukon-FE

The Yukon-FE chip doesn't do gigabit and has a differen PHY internally.
On this chip, phy status register doesn't properly reflect the result
of flow control negotiation. To workaround the problem and avoid having
to have so much chip dependent code; compute the result of flow control
by looking at the local and remote advertised bits.

Signed-off-by: Stephen Hemmminger <shemminger@linux-foundation.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c
index e567996..2c91181 100644
--- a/drivers/net/sky2.c
+++ b/drivers/net/sky2.c
@@ -1766,10 +1766,10 @@ static int sky2_autoneg_done(struct sky2_port *sky2, u16 aux)
 {
 	struct sky2_hw *hw = sky2->hw;
 	unsigned port = sky2->port;
-	u16 lpa;
+	u16 advert, lpa;
 
+	advert = gm_phy_read(hw, port, PHY_MARV_AUNE_ADV);
 	lpa = gm_phy_read(hw, port, PHY_MARV_AUNE_LP);
-
 	if (lpa & PHY_M_AN_RF) {
 		printk(KERN_ERR PFX "%s: remote fault", sky2->netdev->name);
 		return -1;
@@ -1784,20 +1784,40 @@ static int sky2_autoneg_done(struct sky2_port *sky2, u16 aux)
 	sky2->speed = sky2_phy_speed(hw, aux);
 	sky2->duplex = (aux & PHY_M_PS_FULL_DUP) ? DUPLEX_FULL : DUPLEX_HALF;
 
-	/* Pause bits are offset (9..8) */
-	if (hw->chip_id == CHIP_ID_YUKON_XL
-	    || hw->chip_id == CHIP_ID_YUKON_EC_U
-	    || hw->chip_id == CHIP_ID_YUKON_EX)
-		aux >>= 6;
-
-	sky2->flow_status = sky2_flow(aux & PHY_M_PS_RX_P_EN,
-				      aux & PHY_M_PS_TX_P_EN);
+	/* Since the pause result bits seem to in different positions on
+	 * different chips. look at registers.
+	 */
+	if (!sky2_is_copper(hw)) {
+		/* Shift for bits in fiber PHY */
+		advert &= ~(ADVERTISE_PAUSE_CAP|ADVERTISE_PAUSE_ASYM);
+		lpa &= ~(LPA_PAUSE_CAP|LPA_PAUSE_ASYM);
+
+		if (advert & ADVERTISE_1000XPAUSE)
+			advert |= ADVERTISE_PAUSE_CAP;
+		if (advert & ADVERTISE_1000XPSE_ASYM)
+			advert |= ADVERTISE_PAUSE_ASYM;
+		if (lpa & LPA_1000XPAUSE)
+			lpa |= LPA_PAUSE_CAP;
+		if (lpa & LPA_1000XPAUSE_ASYM)
+			lpa |= LPA_PAUSE_ASYM;
+	}
+
+	sky2->flow_status = FC_NONE;
+	if (advert & ADVERTISE_PAUSE_CAP) {
+		if (lpa & LPA_PAUSE_CAP)
+			sky2->flow_status = FC_BOTH;
+		else if (advert & ADVERTISE_PAUSE_ASYM)
+			sky2->flow_status = FC_RX;
+	} else if (advert & ADVERTISE_PAUSE_ASYM) {
+		if ((lpa & LPA_PAUSE_CAP) && (lpa & LPA_PAUSE_ASYM))
+			sky2->flow_status = FC_TX;
+	}
 
 	if (sky2->duplex == DUPLEX_HALF && sky2->speed < SPEED_1000
 	    && !(hw->chip_id == CHIP_ID_YUKON_EC_U || hw->chip_id == CHIP_ID_YUKON_EX))
 		sky2->flow_status = FC_NONE;
 
-	if (aux & PHY_M_PS_RX_P_EN)
+	if (sky2->flow_status & FC_TX)
 		sky2_write8(hw, SK_REG(port, GMAC_CTRL), GMC_PAUSE_ON);
 	else
 		sky2_write8(hw, SK_REG(port, GMAC_CTRL), GMC_PAUSE_OFF);
-- 
cgit v0.10.2


From 819067916d785cac0369b8d6e187b4a83fd17785 Mon Sep 17 00:00:00 2001
From: Stephen Hemminger <shemminger@linux-foundation.org>
Date: Thu, 15 Feb 2007 16:40:33 -0800
Subject: sky2: transmit timeout

The transmit timeout code could hang, and it would not clear out
problems if the hardware was stuck.  Change the code to effectively do
a device down/up similar to the suspend/resume code.

Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c
index 2c91181..fafa402 100644
--- a/drivers/net/sky2.c
+++ b/drivers/net/sky2.c
@@ -1866,16 +1866,13 @@ out:
 	spin_unlock(&sky2->phy_lock);
 }
 
-
 /* Transmit timeout is only called if we are running, carrier is up
  * and tx queue is full (stopped).
- * Called with netif_tx_lock held.
  */
 static void sky2_tx_timeout(struct net_device *dev)
 {
 	struct sky2_port *sky2 = netdev_priv(dev);
 	struct sky2_hw *hw = sky2->hw;
-	u32 imask;
 
 	if (netif_msg_timer(sky2))
 		printk(KERN_ERR PFX "%s: tx timeout\n", dev->name);
@@ -1885,19 +1882,8 @@ static void sky2_tx_timeout(struct net_device *dev)
 	       sky2_read16(hw, sky2->port == 0 ? STAT_TXA1_RIDX : STAT_TXA2_RIDX),
 	       sky2_read16(hw, Q_ADDR(txqaddr[sky2->port], Q_DONE)));
 
-	imask = sky2_read32(hw, B0_IMSK);	/* block IRQ in hw */
-	sky2_write32(hw, B0_IMSK, 0);
-	sky2_read32(hw, B0_IMSK);
-
-	netif_poll_disable(hw->dev[0]);		/* stop NAPI poll */
-	synchronize_irq(hw->pdev->irq);
-
-	netif_start_queue(dev);			/* don't wakeup during flush */
-	sky2_tx_complete(sky2, sky2->tx_prod);	/* Flush transmit queue */
-
-	sky2_write32(hw, B0_IMSK, imask);
-
-	sky2_phy_reinit(sky2);			/* this clears flow control etc */
+	/* can't restart safely under softirq */
+	schedule_work(&hw->restart_work);
 }
 
 static int sky2_change_mtu(struct net_device *dev, int new_mtu)
@@ -2651,6 +2637,49 @@ static void sky2_reset(struct sky2_hw *hw)
 	sky2_write8(hw, STAT_ISR_TIMER_CTRL, TIM_START);
 }
 
+static void sky2_restart(struct work_struct *work)
+{
+	struct sky2_hw *hw = container_of(work, struct sky2_hw, restart_work);
+	struct net_device *dev;
+	int i, err;
+
+	dev_dbg(&hw->pdev->dev, "restarting\n");
+
+	del_timer_sync(&hw->idle_timer);
+
+	rtnl_lock();
+	sky2_write32(hw, B0_IMSK, 0);
+	sky2_read32(hw, B0_IMSK);
+
+	netif_poll_disable(hw->dev[0]);
+
+	for (i = 0; i < hw->ports; i++) {
+		dev = hw->dev[i];
+		if (netif_running(dev))
+			sky2_down(dev);
+	}
+
+	sky2_reset(hw);
+	sky2_write32(hw, B0_IMSK, Y2_IS_BASE);
+	netif_poll_enable(hw->dev[0]);
+
+	for (i = 0; i < hw->ports; i++) {
+		dev = hw->dev[i];
+		if (netif_running(dev)) {
+			err = sky2_up(dev);
+			if (err) {
+				printk(KERN_INFO PFX "%s: could not restart %d\n",
+				       dev->name, err);
+				dev_close(dev);
+			}
+		}
+	}
+
+	sky2_idle_start(hw);
+
+	rtnl_unlock();
+}
+
 static inline u8 sky2_wol_supported(const struct sky2_hw *hw)
 {
 	return sky2_is_copper(hw) ? (WAKE_PHY | WAKE_MAGIC) : 0;
@@ -3613,6 +3642,8 @@ static int __devinit sky2_probe(struct pci_dev *pdev,
 	}
 
 	setup_timer(&hw->idle_timer, sky2_idle, (unsigned long) hw);
+	INIT_WORK(&hw->restart_work, sky2_restart);
+
 	sky2_idle_start(hw);
 
 	pci_set_drvdata(pdev, hw);
@@ -3649,6 +3680,8 @@ static void __devexit sky2_remove(struct pci_dev *pdev)
 
 	del_timer_sync(&hw->idle_timer);
 
+	flush_scheduled_work();
+
 	sky2_write32(hw, B0_IMSK, 0);
 	synchronize_irq(hw->pdev->irq);
 
diff --git a/drivers/net/sky2.h b/drivers/net/sky2.h
index cbca27a..ac24bdc 100644
--- a/drivers/net/sky2.h
+++ b/drivers/net/sky2.h
@@ -1933,6 +1933,7 @@ struct sky2_hw {
 	dma_addr_t   	     st_dma;
 
 	struct timer_list    idle_timer;
+	struct work_struct   restart_work;
 	int		     msi;
 	wait_queue_head_t    msi_wait;
 };
-- 
cgit v0.10.2


From a79abdc6eeca745b2af04fc03f9a04da0d294094 Mon Sep 17 00:00:00 2001
From: Stephen Hemminger <shemminger@linux-foundation.org>
Date: Thu, 15 Feb 2007 16:40:34 -0800
Subject: sky2: receive error handling improvements

Don't drop oversize frame it might be a VLAN (untagged).
Use different counter for fifo overrun vs fifo error.
Print error on fifo overrrun.

Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c
index fafa402..c058117 100644
--- a/drivers/net/sky2.c
+++ b/drivers/net/sky2.c
@@ -2056,9 +2056,6 @@ static struct sk_buff *sky2_receive(struct net_device *dev,
 	if (!(status & GMR_FS_RX_OK))
 		goto resubmit;
 
-	if (length > dev->mtu + ETH_HLEN)
-		goto oversize;
-
 	if (length < copybreak)
 		skb = receive_copy(sky2, re, length);
 	else
@@ -2068,14 +2065,10 @@ resubmit:
 
 	return skb;
 
-oversize:
-	++sky2->net_stats.rx_over_errors;
-	goto resubmit;
-
 error:
 	++sky2->net_stats.rx_errors;
 	if (status & GMR_FS_RX_FF_OV) {
-		sky2->net_stats.rx_fifo_errors++;
+		sky2->net_stats.rx_over_errors++;
 		goto resubmit;
 	}
 
-- 
cgit v0.10.2


From 62ba7e6cfdf6a6e20c77bacdfa15e07859fced45 Mon Sep 17 00:00:00 2001
From: Stephen Hemminger <shemminger@linux-foundation.org>
Date: Thu, 15 Feb 2007 16:40:35 -0800
Subject: sky2: v1.13

New version.

Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c
index c058117..52edbd7 100644
--- a/drivers/net/sky2.c
+++ b/drivers/net/sky2.c
@@ -49,7 +49,7 @@
 #include "sky2.h"
 
 #define DRV_NAME		"sky2"
-#define DRV_VERSION		"1.12"
+#define DRV_VERSION		"1.13"
 #define PFX			DRV_NAME " "
 
 /*
-- 
cgit v0.10.2


From daeafdc360f91d286490105e67b13f094381e23f Mon Sep 17 00:00:00 2001
From: Ralf Baechle <ralf@linux-mips.org>
Date: Fri, 16 Feb 2007 12:52:17 +0000
Subject: Convert meth to netdev_priv

And while at it loose plenty of useless casts.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

diff --git a/drivers/net/meth.c b/drivers/net/meth.c
index d38b7c7..7e69ca6 100644
--- a/drivers/net/meth.c
+++ b/drivers/net/meth.c
@@ -170,7 +170,7 @@ static int mdio_probe(struct meth_private *priv)
 
 static void meth_check_link(struct net_device *dev)
 {
-	struct meth_private *priv = (struct meth_private *) dev->priv;
+	struct meth_private *priv = netdev_priv(dev);
 	unsigned long mii_advertising = mdio_read(priv, 4);
 	unsigned long mii_partner = mdio_read(priv, 5);
 	unsigned long negotiated = mii_advertising & mii_partner;
@@ -268,7 +268,7 @@ static void meth_free_rx_ring(struct meth_private *priv)
 
 int meth_reset(struct net_device *dev)
 {
-	struct meth_private *priv = (struct meth_private *) dev->priv;
+	struct meth_private *priv = netdev_priv(dev);
 
 	/* Reset card */
 	mace->eth.mac_ctrl = SGI_MAC_RESET;
@@ -310,7 +310,7 @@ int meth_reset(struct net_device *dev)
  */
 static int meth_open(struct net_device *dev)
 {
-	struct meth_private *priv = dev->priv;
+	struct meth_private *priv = netdev_priv(dev);
 	int ret;
 
 	priv->phy_addr = -1;    /* No PHY is known yet... */
@@ -354,7 +354,7 @@ out_free_tx_ring:
 
 static int meth_release(struct net_device *dev)
 {
-	struct meth_private *priv = dev->priv;
+	struct meth_private *priv = netdev_priv(dev);
 
 	DPRINTK("Stopping queue\n");
 	netif_stop_queue(dev); /* can't transmit any more */
@@ -376,7 +376,7 @@ static void meth_rx(struct net_device* dev, unsigned long int_status)
 {
 	struct sk_buff *skb;
 	unsigned long status;
-	struct meth_private *priv = (struct meth_private *) dev->priv;
+	struct meth_private *priv = netdev_priv(dev);
 	unsigned long fifo_rptr = (int_status & METH_INT_RX_RPTR_MASK) >> 8;
 
 	spin_lock(&priv->meth_lock);
@@ -466,14 +466,14 @@ static void meth_rx(struct net_device* dev, unsigned long int_status)
 
 static int meth_tx_full(struct net_device *dev)
 {
-	struct meth_private *priv = (struct meth_private *) dev->priv;
+	struct meth_private *priv = netdev_priv(dev);
 
 	return (priv->tx_count >= TX_RING_ENTRIES - 1);
 }
 
 static void meth_tx_cleanup(struct net_device* dev, unsigned long int_status)
 {
-	struct meth_private *priv = dev->priv;
+	struct meth_private *priv = netdev_priv(dev);
 	unsigned long status;
 	struct sk_buff *skb;
 	unsigned long rptr = (int_status&TX_INFO_RPTR) >> 16;
@@ -536,7 +536,7 @@ static void meth_tx_cleanup(struct net_device* dev, unsigned long int_status)
 
 static void meth_error(struct net_device* dev, unsigned status)
 {
-	struct meth_private *priv = (struct meth_private *) dev->priv;
+	struct meth_private *priv = netdev_priv(dev);
 
 	printk(KERN_WARNING "meth: error status: 0x%08x\n",status);
 	/* check for errors too... */
@@ -570,7 +570,7 @@ static void meth_error(struct net_device* dev, unsigned status)
 static irqreturn_t meth_interrupt(int irq, void *dev_id)
 {
 	struct net_device *dev = (struct net_device *)dev_id;
-	struct meth_private *priv = (struct meth_private *) dev->priv;
+	struct meth_private *priv = netdev_priv(dev);
 	unsigned long status;
 
 	status = mace->eth.int_stat;
@@ -695,7 +695,7 @@ static void meth_add_to_tx_ring(struct meth_private *priv, struct sk_buff *skb)
  */
 static int meth_tx(struct sk_buff *skb, struct net_device *dev)
 {
-	struct meth_private *priv = (struct meth_private *) dev->priv;
+	struct meth_private *priv = netdev_priv(dev);
 	unsigned long flags;
 
 	spin_lock_irqsave(&priv->meth_lock, flags);
@@ -726,7 +726,7 @@ static int meth_tx(struct sk_buff *skb, struct net_device *dev)
  */
 static void meth_tx_timeout(struct net_device *dev)
 {
-	struct meth_private *priv = (struct meth_private *) dev->priv;
+	struct meth_private *priv = netdev_priv(dev);
 	unsigned long flags;
 
 	printk(KERN_WARNING "%s: transmit timed out\n", dev->name);
@@ -778,7 +778,7 @@ static int meth_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
  */
 static struct net_device_stats *meth_stats(struct net_device *dev)
 {
-	struct meth_private *priv = (struct meth_private *) dev->priv;
+	struct meth_private *priv = netdev_priv(dev);
 	return &priv->stats;
 }
 
@@ -807,7 +807,7 @@ static struct net_device *meth_init(void)
 	dev->irq	     = MACE_ETHERNET_IRQ;
 	dev->base_addr	     = (unsigned long)&mace->eth;
 
-	priv = (struct meth_private *) dev->priv;
+	priv = netdev_priv(dev);
 	spin_lock_init(&priv->meth_lock);
 
 	ret = register_netdev(dev);
-- 
cgit v0.10.2


From 140e807dd7d6aa68e601f50a10abd5351e06126f Mon Sep 17 00:00:00 2001
From: Haavard Skinnemoen <hskinnemoen@atmel.com>
Date: Fri, 16 Feb 2007 15:59:06 +0100
Subject: macb: Remove inappropriate spinlocks around mii calls

Remove spin_lock_irqsave() around mii_ethtool_gset, mii_ethtool_sset
and generic_mii_ioctl. These are unnecessary and harmful because
the mii calls may call back into the mdio functions, which may sleep.

Pointed out by David Brownell.

Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

diff --git a/drivers/net/macb.c b/drivers/net/macb.c
index a41418b..2e9571b 100644
--- a/drivers/net/macb.c
+++ b/drivers/net/macb.c
@@ -881,27 +881,15 @@ static struct net_device_stats *macb_get_stats(struct net_device *dev)
 static int macb_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
 {
 	struct macb *bp = netdev_priv(dev);
-	int ret;
-	unsigned long flags;
-
-	spin_lock_irqsave(&bp->lock, flags);
-	ret = mii_ethtool_gset(&bp->mii, cmd);
-	spin_unlock_irqrestore(&bp->lock, flags);
 
-	return ret;
+	return mii_ethtool_gset(&bp->mii, cmd);
 }
 
 static int macb_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
 {
 	struct macb *bp = netdev_priv(dev);
-	int ret;
-	unsigned long flags;
-
-	spin_lock_irqsave(&bp->lock, flags);
-	ret = mii_ethtool_sset(&bp->mii, cmd);
-	spin_unlock_irqrestore(&bp->lock, flags);
 
-	return ret;
+	return mii_ethtool_sset(&bp->mii, cmd);
 }
 
 static void macb_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info)
@@ -930,17 +918,11 @@ static struct ethtool_ops macb_ethtool_ops = {
 static int macb_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
 {
 	struct macb *bp = netdev_priv(dev);
-	int ret;
-	unsigned long flags;
 
 	if (!netif_running(dev))
 		return -EINVAL;
 
-	spin_lock_irqsave(&bp->lock, flags);
-	ret = generic_mii_ioctl(&bp->mii, if_mii(rq), cmd, NULL);
-	spin_unlock_irqrestore(&bp->lock, flags);
-
-	return ret;
+	return generic_mii_ioctl(&bp->mii, if_mii(rq), cmd, NULL);
 }
 
 static ssize_t macb_mii_show(const struct device *_dev, char *buf,
-- 
cgit v0.10.2


From 04ce09481b90dd0645fe034c74a3344d712e347f Mon Sep 17 00:00:00 2001
From: "pcnet32@verizon.net" <pcnet32@verizon.net>
Date: Fri, 16 Feb 2007 10:07:12 -0600
Subject: MAINTAINER

After being the defacto maintainer for a couple of years, I can now become the official maintainer.

Signed-off-by:  Don Fry <pcnet32@verizon.net>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

diff --git a/MAINTAINERS b/MAINTAINERS
index b0fd71b..c0f9a1a 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -2623,8 +2623,8 @@ T:	git kernel.org:/pub/scm/linux/kernel/git/brodo/pcmcia-2.6.git
 S:	Maintained
 
 PCNET32 NETWORK DRIVER
-P:	Thomas Bogendörfer
-M:	tsbogend@alpha.franken.de
+P:	Don Fry
+M:	pcnet32@verizon.net
 L:	netdev@vger.kernel.org
 S:	Maintained
 
-- 
cgit v0.10.2


From 659dd8351a0acbf6b057ebddd4388a97cdf0feb2 Mon Sep 17 00:00:00 2001
From: "pcnet32@verizon.net" <pcnet32@verizon.net>
Date: Fri, 16 Feb 2007 10:09:57 -0600
Subject: pcnet32 NAPI no longer experimental

Remove the experimental tag for the pcnet32 NAPI implementation.

Signed-off-by:  Don Fry <pcnet32@verizon.net>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 9603126..bd76b12 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -1284,8 +1284,8 @@ config PCNET32
 	  will be called pcnet32.
 
 config PCNET32_NAPI
-	bool "Use RX polling (NAPI) (EXPERIMENTAL)"
-	depends on PCNET32 && EXPERIMENTAL
+	bool "Use RX polling (NAPI)"
+	depends on PCNET32
 	help
 	  NAPI is a new driver API designed to reduce CPU and interrupt load
 	  when the driver is receiving lots of packets from the card. It is
-- 
cgit v0.10.2


From 52edc17f94f7bd4d9a66bb13d9142f4072c7a82d Mon Sep 17 00:00:00 2001
From: Jeff Morrow <jmorrow@jmorrow.org>
Date: Fri, 16 Feb 2007 01:42:27 -0800
Subject: bugfixes and new hardware support for arcnet driver

The modifications and bug fixes noted below were done by Realtime Control
Works and Contemporary Control Systems, Inc, Jan 2005.  They were
incorporated into the 2.6 kernel by Jeff Morrow of Sierra Analytics, Feb
2007.  <jmorrow@massspec.com>

The changes have been tested on a Contemporary Controls PCI20U-4000.

Summary of changes:

Arc-rawmode.c:
      rx():
      - Fixed error in received packet lengths; 256 byte packets were
        being received as 257 bytes packets.

      prepare_tx():
      - Fixed error in transmit length calcs; 257 byte packets were being
        transmitted as 260 byte packets.

com20020.c:
      com20020_check():
      - We now load the SETUP2 register if the 'clockm' parameter is
        non-zero, instead of checking for ARC_CAN_10MBIT. The user is
        now responsible for whether or not SETUP2 is loaded.  If the
        clock multiplier is non-zero, this means that the user wants a
        baud rate greater than 2.5Mbps. This is not possible unless the
        SETUP2 register is present (COM20020D, or COM20022). So, we're
        relying on the user to be smart about what kind of chip he's
        dealing with...

com20020-pci.c
      - Added several entries to com20020pci_id_table[].

Signed-off-by: Jeff Morrow <jmorrow@massspec.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jeff Garzik <jeff@garzik.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

diff --git a/drivers/net/arcnet/arc-rawmode.c b/drivers/net/arcnet/arc-rawmode.c
index e7555d4..6318814 100644
--- a/drivers/net/arcnet/arc-rawmode.c
+++ b/drivers/net/arcnet/arc-rawmode.c
@@ -94,7 +94,7 @@ static void rx(struct net_device *dev, int bufnum,
 
 	BUGMSG(D_DURING, "it's a raw packet (length=%d)\n", length);
 
-	if (length >= MinTU)
+	if (length > MTU)
 		ofs = 512 - length;
 	else
 		ofs = 256 - length;
@@ -183,7 +183,7 @@ static int prepare_tx(struct net_device *dev, struct archdr *pkt, int length,
 		       length, XMTU);
 		length = XMTU;
 	}
-	if (length > MinTU) {
+	if (length >= MinTU) {
 		hard->offset[0] = 0;
 		hard->offset[1] = ofs = 512 - length;
 	} else if (length > MTU) {
diff --git a/drivers/net/arcnet/arcnet.c b/drivers/net/arcnet/arcnet.c
index 4e91dab..83004fd 100644
--- a/drivers/net/arcnet/arcnet.c
+++ b/drivers/net/arcnet/arcnet.c
@@ -41,7 +41,7 @@
  *     <jojo@repas.de>
  */
 
-#define VERSION "arcnet: v3.93 BETA 2000/04/29 - by Avery Pennarun et al.\n"
+#define VERSION "arcnet: v3.94 BETA 2007/02/08 - by Avery Pennarun et al.\n"
 
 #include <linux/module.h>
 #include <linux/types.h>
diff --git a/drivers/net/arcnet/com20020-pci.c b/drivers/net/arcnet/com20020-pci.c
index 98d326b..b8c0fa6 100644
--- a/drivers/net/arcnet/com20020-pci.c
+++ b/drivers/net/arcnet/com20020-pci.c
@@ -155,6 +155,7 @@ static struct pci_device_id com20020pci_id_table[] = {
 	{ 0x1571, 0xa00b, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ARC_IS_5MBIT },
 	{ 0x1571, 0xa00c, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ARC_IS_5MBIT },
 	{ 0x1571, 0xa00d, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ARC_IS_5MBIT },
+	{ 0x1571, 0xa00e, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ARC_IS_5MBIT },
 	{ 0x1571, 0xa201, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ARC_CAN_10MBIT },
 	{ 0x1571, 0xa202, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ARC_CAN_10MBIT },
 	{ 0x1571, 0xa203, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ARC_CAN_10MBIT },
@@ -163,6 +164,8 @@ static struct pci_device_id com20020pci_id_table[] = {
 	{ 0x1571, 0xa206, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ARC_CAN_10MBIT },
 	{ 0x10B5, 0x9030, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ARC_CAN_10MBIT },
 	{ 0x10B5, 0x9050, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ARC_CAN_10MBIT },
+	{ 0x14BA, 0x6000, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ARC_CAN_10MBIT },
+	{ 0x10B5, 0x2200, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ARC_CAN_10MBIT },
 	{0,}
 };
 
diff --git a/drivers/net/arcnet/com20020.c b/drivers/net/arcnet/com20020.c
index 4218075..7cf0a25 100644
--- a/drivers/net/arcnet/com20020.c
+++ b/drivers/net/arcnet/com20020.c
@@ -104,7 +104,7 @@ int com20020_check(struct net_device *dev)
 	SET_SUBADR(SUB_SETUP1);
 	outb(lp->setup, _XREG);
 
-	if (lp->card_flags & ARC_CAN_10MBIT)
+	if (lp->clockm != 0)
 	{
 		SET_SUBADR(SUB_SETUP2);
 		outb(lp->setup2, _XREG);
-- 
cgit v0.10.2


From 36fe55d6a3c7096a7dc852010865c63d572aeaf4 Mon Sep 17 00:00:00 2001
From: "Ahmed S. Darwish" <darwish.07@gmail.com>
Date: Fri, 16 Feb 2007 01:42:23 -0800
Subject: atm: Use ARRAY_SIZE macro when appropriate

Use ARRAY_SIZE macro already defined in kernel.h for ATM
drivers.

Signed-off-by: Ahmed S. Darwish <darwish.07@gmail.com>
Cc: Jeff Garzik <jeff@garzik.org>
Cc: chas williams <chas@cmf.nrl.navy.mil>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

diff --git a/drivers/atm/he.c b/drivers/atm/he.c
index db33f6f..8510026 100644
--- a/drivers/atm/he.c
+++ b/drivers/atm/he.c
@@ -3017,7 +3017,7 @@ read_prom_byte(struct he_dev *he_dev, int addr)
 	he_writel(he_dev, val, HOST_CNTL);
        
 	/* Send READ instruction */
-	for (i = 0; i < sizeof(readtab)/sizeof(readtab[0]); i++) {
+	for (i = 0; i < ARRAY_SIZE(readtab); i++) {
 		he_writel(he_dev, val | readtab[i], HOST_CNTL);
 		udelay(EEPROM_DELAY);
 	}
diff --git a/drivers/atm/idt77252.c b/drivers/atm/idt77252.c
index f407861..b4b8014 100644
--- a/drivers/atm/idt77252.c
+++ b/drivers/atm/idt77252.c
@@ -388,7 +388,7 @@ idt77252_eeprom_read_status(struct idt77252_dev *card)
 
 	gp = idt77252_read_gp(card) & ~(SAR_GP_EESCLK|SAR_GP_EECS|SAR_GP_EEDO);
 
-	for (i = 0; i < sizeof(rdsrtab)/sizeof(rdsrtab[0]); i++) {
+	for (i = 0; i < ARRAY_SIZE(rdsrtab); i++) {
 		idt77252_write_gp(card, gp | rdsrtab[i]);
 		udelay(5);
 	}
@@ -422,7 +422,7 @@ idt77252_eeprom_read_byte(struct idt77252_dev *card, u8 offset)
 
 	gp = idt77252_read_gp(card) & ~(SAR_GP_EESCLK|SAR_GP_EECS|SAR_GP_EEDO);
 
-	for (i = 0; i < sizeof(rdtab)/sizeof(rdtab[0]); i++) {
+	for (i = 0; i < ARRAY_SIZE(rdtab); i++) {
 		idt77252_write_gp(card, gp | rdtab[i]);
 		udelay(5);
 	}
@@ -469,14 +469,14 @@ idt77252_eeprom_write_byte(struct idt77252_dev *card, u8 offset, u8 data)
 
 	gp = idt77252_read_gp(card) & ~(SAR_GP_EESCLK|SAR_GP_EECS|SAR_GP_EEDO);
 
-	for (i = 0; i < sizeof(wrentab)/sizeof(wrentab[0]); i++) {
+	for (i = 0; i < ARRAY_SIZE(wrentab); i++) {
 		idt77252_write_gp(card, gp | wrentab[i]);
 		udelay(5);
 	}
 	idt77252_write_gp(card, gp | SAR_GP_EECS);
 	udelay(5);
 
-	for (i = 0; i < sizeof(wrtab)/sizeof(wrtab[0]); i++) {
+	for (i = 0; i < ARRAY_SIZE(wrtab); i++) {
 		idt77252_write_gp(card, gp | wrtab[i]);
 		udelay(5);
 	}
diff --git a/drivers/atm/nicstarmac.c b/drivers/atm/nicstarmac.c
index 2c5e3ae..480947f 100644
--- a/drivers/atm/nicstarmac.c
+++ b/drivers/atm/nicstarmac.c
@@ -7,6 +7,8 @@
  * Read this ForeRunner's MAC address from eprom/eeprom
  */
 
+#include <linux/kernel.h>
+
 typedef void __iomem *virt_addr_t;
 
 #define CYCLE_DELAY 5
@@ -176,7 +178,7 @@ read_eprom_byte(virt_addr_t base, u_int8_t offset)
    val = NICSTAR_REG_READ( base, NICSTAR_REG_GENERAL_PURPOSE ) & 0xFFFFFFF0;
 
    /* Send READ instruction */
-   for (i=0; i<sizeof readtab/sizeof readtab[0]; i++)
+   for (i=0; i<ARRAY_SIZE(readtab); i++)
    {
 	NICSTAR_REG_WRITE( base, NICSTAR_REG_GENERAL_PURPOSE,
 		(val | readtab[i]) );
-- 
cgit v0.10.2


From d2ed16356ff4fb9de23fbc5e5d582ce580390106 Mon Sep 17 00:00:00 2001
From: "Kok, Auke" <auke-jan.h.kok@intel.com>
Date: Fri, 16 Feb 2007 14:39:26 -0800
Subject: e1000: fix shared interrupt warning message

Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c
index 619c892..f293690 100644
--- a/drivers/net/e1000/e1000_main.c
+++ b/drivers/net/e1000/e1000_main.c
@@ -1417,10 +1417,6 @@ e1000_open(struct net_device *netdev)
 	if ((err = e1000_setup_all_rx_resources(adapter)))
 		goto err_setup_rx;
 
-	err = e1000_request_irq(adapter);
-	if (err)
-		goto err_req_irq;
-
 	e1000_power_up_phy(adapter);
 
 	if ((err = e1000_up(adapter)))
@@ -1431,6 +1427,10 @@ e1000_open(struct net_device *netdev)
 		e1000_update_mng_vlan(adapter);
 	}
 
+	err = e1000_request_irq(adapter);
+	if (err)
+		goto err_req_irq;
+
 	/* If AMT is enabled, let the firmware know that the network
 	 * interface is now open */
 	if (adapter->hw.mac_type == e1000_82573 &&
@@ -1439,10 +1439,10 @@ e1000_open(struct net_device *netdev)
 
 	return E1000_SUCCESS;
 
+err_req_irq:
+	e1000_down(adapter);
 err_up:
 	e1000_power_down_phy(adapter);
-	e1000_free_irq(adapter);
-err_req_irq:
 	e1000_free_all_rx_resources(adapter);
 err_setup_rx:
 	e1000_free_all_tx_resources(adapter);
-- 
cgit v0.10.2


From 1d33e9c606bcf3d00bf67477e34253e861bb71c3 Mon Sep 17 00:00:00 2001
From: "Kok, Auke" <auke-jan.h.kok@intel.com>
Date: Fri, 16 Feb 2007 14:39:28 -0800
Subject: e1000: remove obsolete custom pci_save_state code

Now that 2.6.19 provides a proper implementation that saves MSI, PCI-E
config space, we can have the e1000 driver use those instead of it's
custom implementation.

Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

diff --git a/drivers/net/e1000/e1000.h b/drivers/net/e1000/e1000.h
index 689f158..dd4b728 100644
--- a/drivers/net/e1000/e1000.h
+++ b/drivers/net/e1000/e1000.h
@@ -337,7 +337,6 @@ struct e1000_adapter {
 	struct e1000_rx_ring test_rx_ring;
 
 
-	uint32_t *config_space;
 	int msg_enable;
 #ifdef CONFIG_PCI_MSI
 	boolean_t have_msi;
diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c
index f293690..a710237 100644
--- a/drivers/net/e1000/e1000_main.c
+++ b/drivers/net/e1000/e1000_main.c
@@ -5071,58 +5071,6 @@ e1000_set_spd_dplx(struct e1000_adapter *adapter, uint16_t spddplx)
 	return 0;
 }
 
-#ifdef CONFIG_PM
-/* Save/restore 16 or 64 dwords of PCI config space depending on which
- * bus we're on (PCI(X) vs. PCI-E)
- */
-#define PCIE_CONFIG_SPACE_LEN 256
-#define PCI_CONFIG_SPACE_LEN 64
-static int
-e1000_pci_save_state(struct e1000_adapter *adapter)
-{
-	struct pci_dev *dev = adapter->pdev;
-	int size;
-	int i;
-
-	if (adapter->hw.mac_type >= e1000_82571)
-		size = PCIE_CONFIG_SPACE_LEN;
-	else
-		size = PCI_CONFIG_SPACE_LEN;
-
-	WARN_ON(adapter->config_space != NULL);
-
-	adapter->config_space = kmalloc(size, GFP_KERNEL);
-	if (!adapter->config_space) {
-		DPRINTK(PROBE, ERR, "unable to allocate %d bytes\n", size);
-		return -ENOMEM;
-	}
-	for (i = 0; i < (size / 4); i++)
-		pci_read_config_dword(dev, i * 4, &adapter->config_space[i]);
-	return 0;
-}
-
-static void
-e1000_pci_restore_state(struct e1000_adapter *adapter)
-{
-	struct pci_dev *dev = adapter->pdev;
-	int size;
-	int i;
-
-	if (adapter->config_space == NULL)
-		return;
-
-	if (adapter->hw.mac_type >= e1000_82571)
-		size = PCIE_CONFIG_SPACE_LEN;
-	else
-		size = PCI_CONFIG_SPACE_LEN;
-	for (i = 0; i < (size / 4); i++)
-		pci_write_config_dword(dev, i * 4, adapter->config_space[i]);
-	kfree(adapter->config_space);
-	adapter->config_space = NULL;
-	return;
-}
-#endif /* CONFIG_PM */
-
 static int
 e1000_suspend(struct pci_dev *pdev, pm_message_t state)
 {
@@ -5142,9 +5090,7 @@ e1000_suspend(struct pci_dev *pdev, pm_message_t state)
 	}
 
 #ifdef CONFIG_PM
-	/* Implement our own version of pci_save_state(pdev) because pci-
-	 * express adapters have 256-byte config spaces. */
-	retval = e1000_pci_save_state(adapter);
+	retval = pci_save_state(pdev);
 	if (retval)
 		return retval;
 #endif
@@ -5231,7 +5177,7 @@ e1000_resume(struct pci_dev *pdev)
 	uint32_t err;
 
 	pci_set_power_state(pdev, PCI_D0);
-	e1000_pci_restore_state(adapter);
+	pci_restore_state(pdev);
 	if ((err = pci_enable_device(pdev))) {
 		printk(KERN_ERR "e1000: Cannot enable PCI device from suspend\n");
 		return err;
-- 
cgit v0.10.2


From ca6efb7d6c9336acda2e7b76a39b59bbfe77ec13 Mon Sep 17 00:00:00 2001
From: "Kok, Auke" <auke-jan.h.kok@intel.com>
Date: Fri, 16 Feb 2007 14:39:30 -0800
Subject: e1000: allow ethtool to see link status when down

By reading the MAC status register we can detect whether the MAC has
seen the PHY see link. This allows us to show the link properties before
the device is up in ethtool.

Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

diff --git a/drivers/net/e1000/e1000_ethtool.c b/drivers/net/e1000/e1000_ethtool.c
index 44ebc72..6777887 100644
--- a/drivers/net/e1000/e1000_ethtool.c
+++ b/drivers/net/e1000/e1000_ethtool.c
@@ -166,7 +166,7 @@ e1000_get_settings(struct net_device *netdev, struct ethtool_cmd *ecmd)
 			ecmd->transceiver = XCVR_EXTERNAL;
 	}
 
-	if (netif_carrier_ok(adapter->netdev)) {
+	if (E1000_READ_REG(&adapter->hw, STATUS) & E1000_STATUS_LU) {
 
 		e1000_get_speed_and_duplex(hw, &adapter->link_speed,
 		                                   &adapter->link_duplex);
-- 
cgit v0.10.2


From 97db9ee7ee86aba1117ea6605413e0972b506fbc Mon Sep 17 00:00:00 2001
From: Gary Zambrano <zambrano@broadcom.com>
Date: Fri, 16 Feb 2007 13:27:23 -0800
Subject: b44: replace define

Replaced B44_DMA_MASK with DMA_30BIT_MASK.

Signed-off by: Gary Zambrano <zambrano@broadcom.com>

Signed-off-by: Jeff Garzik <jeff@garzik.org>

diff --git a/drivers/net/b44.c b/drivers/net/b44.c
index 5ff7882..9332f4c 100644
--- a/drivers/net/b44.c
+++ b/drivers/net/b44.c
@@ -59,7 +59,6 @@
 #define B44_DEF_TX_RING_PENDING		(B44_TX_RING_SIZE - 1)
 #define B44_TX_RING_BYTES	(sizeof(struct dma_desc) * \
 				 B44_TX_RING_SIZE)
-#define B44_DMA_MASK 0x3fffffff
 
 #define TX_RING_GAP(BP)	\
 	(B44_TX_RING_SIZE - (BP)->tx_pending)
@@ -665,7 +664,7 @@ static int b44_alloc_rx_skb(struct b44 *bp, int src_idx, u32 dest_idx_unmasked)
 	/* Hardware bug work-around, the chip is unable to do PCI DMA
 	   to/from anything above 1GB :-( */
 	if (dma_mapping_error(mapping) ||
-		mapping + RX_PKT_BUF_SZ > B44_DMA_MASK) {
+		mapping + RX_PKT_BUF_SZ > DMA_30BIT_MASK) {
 		/* Sigh... */
 		if (!dma_mapping_error(mapping))
 			pci_unmap_single(bp->pdev, mapping, RX_PKT_BUF_SZ,PCI_DMA_FROMDEVICE);
@@ -677,7 +676,7 @@ static int b44_alloc_rx_skb(struct b44 *bp, int src_idx, u32 dest_idx_unmasked)
 					 RX_PKT_BUF_SZ,
 					 PCI_DMA_FROMDEVICE);
 		if (dma_mapping_error(mapping) ||
-			mapping + RX_PKT_BUF_SZ > B44_DMA_MASK) {
+			mapping + RX_PKT_BUF_SZ > DMA_30BIT_MASK) {
 			if (!dma_mapping_error(mapping))
 				pci_unmap_single(bp->pdev, mapping, RX_PKT_BUF_SZ,PCI_DMA_FROMDEVICE);
 			dev_kfree_skb_any(skb);
@@ -988,7 +987,7 @@ static int b44_start_xmit(struct sk_buff *skb, struct net_device *dev)
 	}
 
 	mapping = pci_map_single(bp->pdev, skb->data, len, PCI_DMA_TODEVICE);
-	if (dma_mapping_error(mapping) || mapping + len > B44_DMA_MASK) {
+	if (dma_mapping_error(mapping) || mapping + len > DMA_30BIT_MASK) {
 		/* Chip can't handle DMA to/from >1GB, use bounce buffer */
 		if (!dma_mapping_error(mapping))
 			pci_unmap_single(bp->pdev, mapping, len, PCI_DMA_TODEVICE);
@@ -1000,7 +999,7 @@ static int b44_start_xmit(struct sk_buff *skb, struct net_device *dev)
 
 		mapping = pci_map_single(bp->pdev, bounce_skb->data,
 					 len, PCI_DMA_TODEVICE);
-		if (dma_mapping_error(mapping) || mapping + len > B44_DMA_MASK) {
+		if (dma_mapping_error(mapping) || mapping + len > DMA_30BIT_MASK) {
 			if (!dma_mapping_error(mapping))
 				pci_unmap_single(bp->pdev, mapping,
 					 len, PCI_DMA_TODEVICE);
@@ -1227,7 +1226,7 @@ static int b44_alloc_consistent(struct b44 *bp)
 		                             DMA_BIDIRECTIONAL);
 
 		if (dma_mapping_error(rx_ring_dma) ||
-			rx_ring_dma + size > B44_DMA_MASK) {
+			rx_ring_dma + size > DMA_30BIT_MASK) {
 			kfree(rx_ring);
 			goto out_err;
 		}
@@ -1254,7 +1253,7 @@ static int b44_alloc_consistent(struct b44 *bp)
 		                             DMA_TO_DEVICE);
 
 		if (dma_mapping_error(tx_ring_dma) ||
-			tx_ring_dma + size > B44_DMA_MASK) {
+			tx_ring_dma + size > DMA_30BIT_MASK) {
 			kfree(tx_ring);
 			goto out_err;
 		}
@@ -2151,13 +2150,13 @@ static int __devinit b44_init_one(struct pci_dev *pdev,
 
 	pci_set_master(pdev);
 
-	err = pci_set_dma_mask(pdev, (u64) B44_DMA_MASK);
+	err = pci_set_dma_mask(pdev, (u64) DMA_30BIT_MASK);
 	if (err) {
 		dev_err(&pdev->dev, "No usable DMA configuration, aborting.\n");
 		goto err_out_free_res;
 	}
 
-	err = pci_set_consistent_dma_mask(pdev, (u64) B44_DMA_MASK);
+	err = pci_set_consistent_dma_mask(pdev, (u64) DMA_30BIT_MASK);
 	if (err) {
 		dev_err(&pdev->dev, "No usable DMA configuration, aborting.\n");
 		goto err_out_free_res;
-- 
cgit v0.10.2


From 40ee8c768cbb57aac7e55f7b54572afa8a9eac5a Mon Sep 17 00:00:00 2001
From: Gary Zambrano <zambrano@broadcom.com>
Date: Fri, 16 Feb 2007 13:27:27 -0800
Subject: B44: increase wait loop

The b44 Enet control disable bit may take longer to clear on some
systems, so the loop count is increased with this patch. Functionality
is not compromised, but a debug message can be seen when the bit is not
cleared within the count value.
Thanks to Vasileios Lourdas who reported the problem.

Signed-off by: Gary Zambrano <zambrano@broadcom.com>

Signed-off-by: Jeff Garzik <jeff@garzik.org>

diff --git a/drivers/net/b44.c b/drivers/net/b44.c
index 9332f4c..aaada57 100644
--- a/drivers/net/b44.c
+++ b/drivers/net/b44.c
@@ -1288,7 +1288,7 @@ static void b44_chip_reset(struct b44 *bp)
 	if (ssb_is_core_up(bp)) {
 		bw32(bp, B44_RCV_LAZY, 0);
 		bw32(bp, B44_ENET_CTRL, ENET_CTRL_DISABLE);
-		b44_wait_bit(bp, B44_ENET_CTRL, ENET_CTRL_DISABLE, 100, 1);
+		b44_wait_bit(bp, B44_ENET_CTRL, ENET_CTRL_DISABLE, 200, 1);
 		bw32(bp, B44_DMATX_CTRL, 0);
 		bp->tx_prod = bp->tx_cons = 0;
 		if (br32(bp, B44_DMARX_STAT) & DMARX_STAT_EMASK) {
-- 
cgit v0.10.2


From 8765c125e05167b5b7669961b44f50902d4bb36d Mon Sep 17 00:00:00 2001
From: Stephen Hemminger <shemminger@linux-foundation.org>
Date: Fri, 16 Feb 2007 15:07:53 -0800
Subject: sk98lin: planned removal

Nag message about planned sk98lin removal.

Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

diff --git a/drivers/net/sk98lin/skge.c b/drivers/net/sk98lin/skge.c
index 92d11b9..e94ab25 100644
--- a/drivers/net/sk98lin/skge.c
+++ b/drivers/net/sk98lin/skge.c
@@ -5188,6 +5188,9 @@ static struct pci_driver skge_driver = {
 
 static int __init skge_init(void)
 {
+	printk(KERN_NOTICE "sk98lin: driver has been replaced by the skge driver"
+	       " and is scheduled for removal\n");
+
 	return pci_register_driver(&skge_driver);
 }
 
-- 
cgit v0.10.2


From f0ba73583aa7617d77346b3ee418f2f58a9a2204 Mon Sep 17 00:00:00 2001
From: Ralf Baechle <ralf@linux-mips.org>
Date: Sat, 17 Feb 2007 02:51:15 +0000
Subject: Fix link autonegotiation timer.

Start link negotiation in the open method.  Previously it was started
on driver initialialization and shutdown on close so an ifdown would
have results in closing negotiation for good.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

diff --git a/drivers/net/ioc3-eth.c b/drivers/net/ioc3-eth.c
index f0d30cf..4ad7807 100644
--- a/drivers/net/ioc3-eth.c
+++ b/drivers/net/ioc3-eth.c
@@ -836,13 +836,17 @@ static int ioc3_mii_init(struct ioc3_private *ip)
 	}
 
 	ip->mii.phy_id = i;
+
+out:
+	return res;
+}
+
+static void ioc3_mii_start(struct ioc3_private *ip)
+{
 	ip->ioc3_timer.expires = jiffies + (12 * HZ)/10;  /* 1.2 sec. */
 	ip->ioc3_timer.data = (unsigned long) ip;
 	ip->ioc3_timer.function = &ioc3_timer;
 	add_timer(&ip->ioc3_timer);
-
-out:
-	return res;
 }
 
 static inline void ioc3_clean_rx_ring(struct ioc3_private *ip)
@@ -1071,6 +1075,7 @@ static int ioc3_open(struct net_device *dev)
 	ip->ehar_h = 0;
 	ip->ehar_l = 0;
 	ioc3_init(dev);
+	ioc3_mii_start(ip);
 
 	netif_start_queue(dev);
 	return 0;
@@ -1274,6 +1279,7 @@ static int ioc3_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 		goto out_stop;
 	}
 
+	ioc3_mii_start(ip);
 	ioc3_ssram_disc(ip);
 	ioc3_get_eaddr(ip);
 
@@ -1314,6 +1320,7 @@ static int ioc3_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 
 out_stop:
 	ioc3_stop(ip);
+	del_timer_sync(&ip->ioc3_timer);
 	ioc3_free_rings(ip);
 out_res:
 	pci_release_regions(pdev);
@@ -1335,6 +1342,8 @@ static void __devexit ioc3_remove_one (struct pci_dev *pdev)
 	struct ioc3 *ioc3 = ip->regs;
 
 	unregister_netdev(dev);
+	del_timer_sync(&ip->ioc3_timer);
+
 	iounmap(ioc3);
 	pci_release_regions(pdev);
 	free_netdev(dev);
@@ -1492,6 +1501,7 @@ static void ioc3_timeout(struct net_device *dev)
 	ioc3_stop(ip);
 	ioc3_init(dev);
 	ioc3_mii_init(ip);
+	ioc3_mii_start(ip);
 
 	spin_unlock_irq(&ip->ioc3_lock);
 
-- 
cgit v0.10.2


From bdcac1878c80b068d8e073c1691d4bd09ba9996d Mon Sep 17 00:00:00 2001
From: Baruch Even <baruch@ev-en.org>
Date: Sat, 17 Feb 2007 16:37:52 +0200
Subject: Hostess SV-11 depends on INET

Comtrol Hostess SV-11 driver uses features from INET but doesn't depend on it.
The simple solution is to make it depend on INET as happens for the sealevel
driver.

Fixes bug #7930.

Signed-Off-By: Baruch Even <baruch@ev-en.org>

Signed-off-by: Jeff Garzik <jeff@garzik.org>

diff --git a/drivers/net/wan/Kconfig b/drivers/net/wan/Kconfig
index 61708cf..8897f53 100644
--- a/drivers/net/wan/Kconfig
+++ b/drivers/net/wan/Kconfig
@@ -26,7 +26,7 @@ config WAN
 # There is no way to detect a comtrol sv11 - force it modular for now.
 config HOSTESS_SV11
 	tristate "Comtrol Hostess SV-11 support"
-	depends on WAN && ISA && m && ISA_DMA_API
+	depends on WAN && ISA && m && ISA_DMA_API && INET
 	help
 	  Driver for Comtrol Hostess SV-11 network card which
 	  operates on low speed synchronous serial links at up to
-- 
cgit v0.10.2


From 0b3581e26d4807f36b2294366d6fbd506c30d68a Mon Sep 17 00:00:00 2001
From: Daniel Drake <dsd@gentoo.org>
Date: Sat, 10 Feb 2007 03:48:17 +0000
Subject: sk98lin: mark deprecated in Kconfig

sk98lin is scheduled for removal in July 2007. This patch makes the
deprecation more obvious in the configuration interface. FWIW, Gentoo have
been shipping a patch very similar to this for a long time.

Signed-off-by: Daniel Drake <dsd@gentoo.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index bd76b12..d9400ef 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -2125,14 +2125,16 @@ config SKY2
 	  will be called sky2.  This is recommended.
 
 config SK98LIN
-	tristate "Marvell Yukon Chipset / SysKonnect SK-98xx Support"
+	tristate "Marvell Yukon Chipset / SysKonnect SK-98xx Support (DEPRECATED)"
 	depends on PCI
 	---help---
 	  Say Y here if you have a Marvell Yukon or SysKonnect SK-98xx/SK-95xx
 	  compliant Gigabit Ethernet Adapter.
 
-	  This driver supports the original Yukon chipset. A cleaner driver is 
-	  also available (skge) which seems to work better than this one.
+	  This driver supports the original Yukon chipset. This driver is
+	  deprecated and will be removed from the kernel in the near future,
+	  it has been replaced by the skge driver. skge is cleaner and
+	  seems to work better.
 
 	  This driver does not support the newer Yukon2 chipset. A separate
 	  driver, sky2, is provided to support Yukon2-based adapters.
-- 
cgit v0.10.2