From 56bf882230d2266a2e07b7f404dc96d157a65daa Mon Sep 17 00:00:00 2001 From: "John W. Linville" Date: Fri, 4 Jun 2010 14:47:35 -0400 Subject: Revert "wireless: hostap, fix oops due to early probing interrupt" This reverts commit 15920d8afc87861672e16fa95ae2764b065d6dd3. This patch was discovered to cause some hostap devices to fail to initialized. https://bugzilla.kernel.org/show_bug.cgi?id=16111 Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/hostap/hostap_hw.c b/drivers/net/wireless/hostap/hostap_hw.c index d707328..ff9b5c8 100644 --- a/drivers/net/wireless/hostap/hostap_hw.c +++ b/drivers/net/wireless/hostap/hostap_hw.c @@ -2618,15 +2618,6 @@ static irqreturn_t prism2_interrupt(int irq, void *dev_id) int events = 0; u16 ev; - /* Detect early interrupt before driver is fully configued */ - if (!dev->base_addr) { - if (net_ratelimit()) { - printk(KERN_DEBUG "%s: Interrupt, but dev not configured\n", - dev->name); - } - return IRQ_HANDLED; - } - iface = netdev_priv(dev); local = iface->local; -- cgit v0.10.2 From 8b9a4e6e442756f670ef507f09bbc6c11dc0fca6 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Fri, 28 May 2010 15:22:58 +0200 Subject: mac80211: process station blockack action frames from work Processing an association response could take a bit of time while we set up the hardware etc. During that time, the AP might already send a blockack request. If this happens very quickly on a fairly slow machine, we can end up processing the blockack request before the association processing has finished. Since the blockack processing cannot sleep right now, we also cannot make it wait in the driver. As a result, sometimes on slow machines the iwlagn driver gets totally confused, and no traffic can pass when the aggregation setup was done before the assoc setup completed. I'm working on a proper fix for this, which involves queuing all blockack category action frames from a work struct, and also allowing the ampdu_action driver callback to sleep, which will generally clean up the code and make things easier. However, this is a very involved and complex change. To fix the problem at hand in a way that can also be backported to stable, I've come up with this patch. Here, I simply process all aggregation action frames from the managed interface skb queue, which means their processing will be serialized with processing the association response, thereby fixing the problem. Signed-off-by: Johannes Berg Cc: stable@kernel.org Signed-off-by: John W. Linville diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index 0839c4e..3310e70 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -1692,14 +1692,52 @@ static void ieee80211_sta_rx_queued_mgmt(struct ieee80211_sub_if_data *sdata, rma = ieee80211_rx_mgmt_disassoc(sdata, mgmt, skb->len); break; case IEEE80211_STYPE_ACTION: - if (mgmt->u.action.category != WLAN_CATEGORY_SPECTRUM_MGMT) + switch (mgmt->u.action.category) { + case WLAN_CATEGORY_BACK: { + struct ieee80211_local *local = sdata->local; + int len = skb->len; + struct sta_info *sta; + + rcu_read_lock(); + sta = sta_info_get(sdata, mgmt->sa); + if (!sta) { + rcu_read_unlock(); + break; + } + + local_bh_disable(); + + switch (mgmt->u.action.u.addba_req.action_code) { + case WLAN_ACTION_ADDBA_REQ: + if (len < (IEEE80211_MIN_ACTION_SIZE + + sizeof(mgmt->u.action.u.addba_req))) + break; + ieee80211_process_addba_request(local, sta, mgmt, len); + break; + case WLAN_ACTION_ADDBA_RESP: + if (len < (IEEE80211_MIN_ACTION_SIZE + + sizeof(mgmt->u.action.u.addba_resp))) + break; + ieee80211_process_addba_resp(local, sta, mgmt, len); + break; + case WLAN_ACTION_DELBA: + if (len < (IEEE80211_MIN_ACTION_SIZE + + sizeof(mgmt->u.action.u.delba))) + break; + ieee80211_process_delba(sdata, sta, mgmt, len); + break; + } + local_bh_enable(); + rcu_read_unlock(); break; - - ieee80211_sta_process_chanswitch(sdata, - &mgmt->u.action.u.chan_switch.sw_elem, - (void *)ifmgd->associated->priv, - rx_status->mactime); - break; + } + case WLAN_CATEGORY_SPECTRUM_MGMT: + ieee80211_sta_process_chanswitch(sdata, + &mgmt->u.action.u.chan_switch.sw_elem, + (void *)ifmgd->associated->priv, + rx_status->mactime); + break; + } } mutex_unlock(&ifmgd->mtx); diff --git a/net/mac80211/rx.c b/net/mac80211/rx.c index 5e0b654..be9abc2 100644 --- a/net/mac80211/rx.c +++ b/net/mac80211/rx.c @@ -1944,6 +1944,9 @@ ieee80211_rx_h_action(struct ieee80211_rx_data *rx) if (len < IEEE80211_MIN_ACTION_SIZE + 1) break; + if (sdata->vif.type == NL80211_IFTYPE_STATION) + return ieee80211_sta_rx_mgmt(sdata, rx->skb); + switch (mgmt->u.action.u.addba_req.action_code) { case WLAN_ACTION_ADDBA_REQ: if (len < (IEEE80211_MIN_ACTION_SIZE + -- cgit v0.10.2 From e307139d7ad532761cdbf2a665f3c53c509a2d0e Mon Sep 17 00:00:00 2001 From: Tobias Doerffel Date: Sun, 30 May 2010 00:02:18 +0200 Subject: ath5k: depend on CONFIG_PM_SLEEP for suspend/resume functions MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit When building a kernel with CONFIG_PM=y but neither suspend nor hibernate support, the compiler complains about the static functions ath5k_pci_suspend() and ath5k_pci_resume() not being used: drivers/net/wireless/ath/ath5k/base.c:713:12: warning: ‘ath5k_pci_suspend’ defined but not used drivers/net/wireless/ath/ath5k/base.c:722:12: warning: ‘ath5k_pci_resume’ defined but not used Depending on CONFIG_PM_SLEEP rather than CONFIG_PM fixes the issue. Signed-off-by: Tobias Doerffel Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ath/ath5k/base.c b/drivers/net/wireless/ath/ath5k/base.c index 2978359..53d95c8 100644 --- a/drivers/net/wireless/ath/ath5k/base.c +++ b/drivers/net/wireless/ath/ath5k/base.c @@ -195,7 +195,7 @@ static const struct ieee80211_rate ath5k_rates[] = { static int __devinit ath5k_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id); static void __devexit ath5k_pci_remove(struct pci_dev *pdev); -#ifdef CONFIG_PM +#ifdef CONFIG_PM_SLEEP static int ath5k_pci_suspend(struct device *dev); static int ath5k_pci_resume(struct device *dev); @@ -203,7 +203,7 @@ static SIMPLE_DEV_PM_OPS(ath5k_pm_ops, ath5k_pci_suspend, ath5k_pci_resume); #define ATH5K_PM_OPS (&ath5k_pm_ops) #else #define ATH5K_PM_OPS NULL -#endif /* CONFIG_PM */ +#endif /* CONFIG_PM_SLEEP */ static struct pci_driver ath5k_pci_driver = { .name = KBUILD_MODNAME, @@ -708,7 +708,7 @@ ath5k_pci_remove(struct pci_dev *pdev) ieee80211_free_hw(hw); } -#ifdef CONFIG_PM +#ifdef CONFIG_PM_SLEEP static int ath5k_pci_suspend(struct device *dev) { struct ieee80211_hw *hw = pci_get_drvdata(to_pci_dev(dev)); @@ -734,7 +734,7 @@ static int ath5k_pci_resume(struct device *dev) ath5k_led_enable(sc); return 0; } -#endif /* CONFIG_PM */ +#endif /* CONFIG_PM_SLEEP */ /***********************\ -- cgit v0.10.2 From 6b5dcccb495b66b3b0b9581cdccfed038e5d68a2 Mon Sep 17 00:00:00 2001 From: Bob Copeland Date: Fri, 4 Jun 2010 08:14:14 -0400 Subject: ath5k: retain promiscuous setting Commit 56d1de0a21db28e41741cfa0a66e18bc8d920554, "ath5k: clean up filter flags setting" introduced a regression in monitor mode such that the promisc filter flag would get lost. Although we set the promisc flag when it changed, we did not preserve it across subsequent calls to configure_filter. This patch restores the original functionality. Cc: stable@kernel.org Bisected-by: weedy2887@gmail.com Tested-by: weedy2887@gmail.com Tested-by: Rick Farina Signed-off-by: Bob Copeland Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ath/ath5k/base.c b/drivers/net/wireless/ath/ath5k/base.c index 53d95c8..648972d 100644 --- a/drivers/net/wireless/ath/ath5k/base.c +++ b/drivers/net/wireless/ath/ath5k/base.c @@ -3140,13 +3140,15 @@ static void ath5k_configure_filter(struct ieee80211_hw *hw, if (changed_flags & (FIF_PROMISC_IN_BSS | FIF_OTHER_BSS)) { if (*new_flags & FIF_PROMISC_IN_BSS) { - rfilt |= AR5K_RX_FILTER_PROM; __set_bit(ATH_STAT_PROMISC, sc->status); } else { __clear_bit(ATH_STAT_PROMISC, sc->status); } } + if (test_bit(ATH_STAT_PROMISC, sc->status)) + rfilt |= AR5K_RX_FILTER_PROM; + /* Note, AR5K_RX_FILTER_MCAST is already enabled */ if (*new_flags & FIF_ALLMULTI) { mfilt[0] = ~0; -- cgit v0.10.2 From a6866ac93e6cb68091326e80b4fa4619a5957644 Mon Sep 17 00:00:00 2001 From: Reinette Chatre Date: Thu, 20 May 2010 10:54:40 -0700 Subject: iwl3945: enable stuck queue detection on 3945 We learn from http://bugzilla.intellinuxwireless.org/show_bug.cgi?id=1834 and https://bugzilla.redhat.com/show_bug.cgi?id=589777 that 3945 can also suffer from a stuck command queue. Enable stuck queue detection for iwl3945 to enable recovery in this case. Signed-off-by: Reinette Chatre diff --git a/drivers/net/wireless/iwlwifi/iwl-3945.c b/drivers/net/wireless/iwlwifi/iwl-3945.c index 068f7f8..c44a303 100644 --- a/drivers/net/wireless/iwlwifi/iwl-3945.c +++ b/drivers/net/wireless/iwlwifi/iwl-3945.c @@ -2852,6 +2852,7 @@ static struct iwl_lib_ops iwl3945_lib = { .isr = iwl_isr_legacy, .config_ap = iwl3945_config_ap, .manage_ibss_station = iwl3945_manage_ibss_station, + .recover_from_tx_stall = iwl_bg_monitor_recover, .check_plcp_health = iwl3945_good_plcp_health, .debugfs_ops = { -- cgit v0.10.2 From 1402364162afbaac1b8a74ee21aeb013e817ac7d Mon Sep 17 00:00:00 2001 From: Abhijeet Kolekar Date: Wed, 2 Jun 2010 21:15:10 -0700 Subject: iwl3945: fix internal scan Port of internal scan to iwl3945 missed introduction of iwl3945_get_single_channel_for_scan. Fix the following bug by introducing the iwl3945_get_single_channel_for_scan http://bugzilla.intellinuxwireless.org/show_bug.cgi?id=2208 Signed-off-by: Abhijeet Kolekar Signed-off-by: Reinette Chatre diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-lib.c b/drivers/net/wireless/iwlwifi/iwl-agn-lib.c index 1004cfc..0f292a2 100644 --- a/drivers/net/wireless/iwlwifi/iwl-agn-lib.c +++ b/drivers/net/wireless/iwlwifi/iwl-agn-lib.c @@ -1119,10 +1119,9 @@ static int iwl_get_single_channel_for_scan(struct iwl_priv *priv, struct iwl_scan_channel *scan_ch) { const struct ieee80211_supported_band *sband; - const struct iwl_channel_info *ch_info; u16 passive_dwell = 0; u16 active_dwell = 0; - int i, added = 0; + int added = 0; u16 channel = 0; sband = iwl_get_hw_mode(priv, band); @@ -1137,32 +1136,7 @@ static int iwl_get_single_channel_for_scan(struct iwl_priv *priv, if (passive_dwell <= active_dwell) passive_dwell = active_dwell + 1; - /* only scan single channel, good enough to reset the RF */ - /* pick the first valid not in-use channel */ - if (band == IEEE80211_BAND_5GHZ) { - for (i = 14; i < priv->channel_count; i++) { - if (priv->channel_info[i].channel != - le16_to_cpu(priv->staging_rxon.channel)) { - channel = priv->channel_info[i].channel; - ch_info = iwl_get_channel_info(priv, - band, channel); - if (is_channel_valid(ch_info)) - break; - } - } - } else { - for (i = 0; i < 14; i++) { - if (priv->channel_info[i].channel != - le16_to_cpu(priv->staging_rxon.channel)) { - channel = - priv->channel_info[i].channel; - ch_info = iwl_get_channel_info(priv, - band, channel); - if (is_channel_valid(ch_info)) - break; - } - } - } + channel = iwl_get_single_channel_number(priv, band); if (channel) { scan_ch->channel = cpu_to_le16(channel); scan_ch->type = SCAN_CHANNEL_TYPE_PASSIVE; diff --git a/drivers/net/wireless/iwlwifi/iwl-core.c b/drivers/net/wireless/iwlwifi/iwl-core.c index 5a7eca8..426e955 100644 --- a/drivers/net/wireless/iwlwifi/iwl-core.c +++ b/drivers/net/wireless/iwlwifi/iwl-core.c @@ -854,6 +854,45 @@ void iwl_set_rxon_chain(struct iwl_priv *priv) } EXPORT_SYMBOL(iwl_set_rxon_chain); +/* Return valid channel */ +u8 iwl_get_single_channel_number(struct iwl_priv *priv, + enum ieee80211_band band) +{ + const struct iwl_channel_info *ch_info; + int i; + u8 channel = 0; + + /* only scan single channel, good enough to reset the RF */ + /* pick the first valid not in-use channel */ + if (band == IEEE80211_BAND_5GHZ) { + for (i = 14; i < priv->channel_count; i++) { + if (priv->channel_info[i].channel != + le16_to_cpu(priv->staging_rxon.channel)) { + channel = priv->channel_info[i].channel; + ch_info = iwl_get_channel_info(priv, + band, channel); + if (is_channel_valid(ch_info)) + break; + } + } + } else { + for (i = 0; i < 14; i++) { + if (priv->channel_info[i].channel != + le16_to_cpu(priv->staging_rxon.channel)) { + channel = + priv->channel_info[i].channel; + ch_info = iwl_get_channel_info(priv, + band, channel); + if (is_channel_valid(ch_info)) + break; + } + } + } + + return channel; +} +EXPORT_SYMBOL(iwl_get_single_channel_number); + /** * iwl_set_rxon_channel - Set the phymode and channel values in staging RXON * @phymode: MODE_IEEE80211A sets to 5.2GHz; all else set to 2.4GHz diff --git a/drivers/net/wireless/iwlwifi/iwl-core.h b/drivers/net/wireless/iwlwifi/iwl-core.h index 7e5a5ba..31775bd 100644 --- a/drivers/net/wireless/iwlwifi/iwl-core.h +++ b/drivers/net/wireless/iwlwifi/iwl-core.h @@ -343,6 +343,8 @@ int iwl_check_rxon_cmd(struct iwl_priv *priv); int iwl_full_rxon_required(struct iwl_priv *priv); void iwl_set_rxon_chain(struct iwl_priv *priv); int iwl_set_rxon_channel(struct iwl_priv *priv, struct ieee80211_channel *ch); +u8 iwl_get_single_channel_number(struct iwl_priv *priv, + enum ieee80211_band band); void iwl_set_rxon_ht(struct iwl_priv *priv, struct iwl_ht_config *ht_conf); u8 iwl_is_ht40_tx_allowed(struct iwl_priv *priv, struct ieee80211_sta_ht_cap *sta_ht_inf); diff --git a/drivers/net/wireless/iwlwifi/iwl3945-base.c b/drivers/net/wireless/iwlwifi/iwl3945-base.c index 3e5bffb..6c353ca 100644 --- a/drivers/net/wireless/iwlwifi/iwl3945-base.c +++ b/drivers/net/wireless/iwlwifi/iwl3945-base.c @@ -1844,6 +1844,49 @@ static void iwl3945_irq_tasklet(struct iwl_priv *priv) #endif } +static int iwl3945_get_single_channel_for_scan(struct iwl_priv *priv, + struct ieee80211_vif *vif, + enum ieee80211_band band, + struct iwl3945_scan_channel *scan_ch) +{ + const struct ieee80211_supported_band *sband; + u16 passive_dwell = 0; + u16 active_dwell = 0; + int added = 0; + u8 channel = 0; + + sband = iwl_get_hw_mode(priv, band); + if (!sband) { + IWL_ERR(priv, "invalid band\n"); + return added; + } + + active_dwell = iwl_get_active_dwell_time(priv, band, 0); + passive_dwell = iwl_get_passive_dwell_time(priv, band, vif); + + if (passive_dwell <= active_dwell) + passive_dwell = active_dwell + 1; + + + channel = iwl_get_single_channel_number(priv, band); + + if (channel) { + scan_ch->channel = channel; + scan_ch->type = 0; /* passive */ + scan_ch->active_dwell = cpu_to_le16(active_dwell); + scan_ch->passive_dwell = cpu_to_le16(passive_dwell); + /* Set txpower levels to defaults */ + scan_ch->tpc.dsp_atten = 110; + if (band == IEEE80211_BAND_5GHZ) + scan_ch->tpc.tx_gain = ((1 << 5) | (3 << 3)) | 3; + else + scan_ch->tpc.tx_gain = ((1 << 5) | (5 << 3)); + added++; + } else + IWL_ERR(priv, "no valid channel found\n"); + return added; +} + static int iwl3945_get_channels_for_scan(struct iwl_priv *priv, enum ieee80211_band band, u8 is_active, u8 n_probes, @@ -2992,9 +3035,16 @@ void iwl3945_request_scan(struct iwl_priv *priv, struct ieee80211_vif *vif) /* select Rx antennas */ scan->flags |= iwl3945_get_antenna_flags(priv); - scan->channel_count = - iwl3945_get_channels_for_scan(priv, band, is_active, n_probes, - (void *)&scan->data[le16_to_cpu(scan->tx_cmd.len)], vif); + if (priv->is_internal_short_scan) { + scan->channel_count = + iwl3945_get_single_channel_for_scan(priv, vif, band, + (void *)&scan->data[le16_to_cpu( + scan->tx_cmd.len)]); + } else { + scan->channel_count = + iwl3945_get_channels_for_scan(priv, band, is_active, n_probes, + (void *)&scan->data[le16_to_cpu(scan->tx_cmd.len)], vif); + } if (scan->channel_count == 0) { IWL_DEBUG_SCAN(priv, "channel count %d\n", scan->channel_count); -- cgit v0.10.2 From 9edc71b746efeaadc40e668964b76cda81fef386 Mon Sep 17 00:00:00 2001 From: Wey-Yi Guy Date: Wed, 2 Jun 2010 15:17:49 -0700 Subject: iwlwifi: add name to Maintainers list Add "Wey-Yi Guy" to maintainers list for iwlwifi. Signed-off-by: Wey-Yi Guy Signed-off-by: Reinette Chatre diff --git a/MAINTAINERS b/MAINTAINERS index 22a49e6..8d51903 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -3009,6 +3009,7 @@ F: include/linux/wimax/i2400m.h INTEL WIRELESS WIFI LINK (iwlwifi) M: Zhu Yi M: Reinette Chatre +M: Wey-Yi Guy M: Intel Linux Wireless L: linux-wireless@vger.kernel.org W: http://intellinuxwireless.org -- cgit v0.10.2 From 7d47618a2ade0cb6d8a0b2597029c383c1662fa0 Mon Sep 17 00:00:00 2001 From: Emmanuel Grumbach Date: Sun, 23 May 2010 00:14:08 -0700 Subject: iwlwifi: move sysfs_create_group to post request firmware Move the sysfs_create_group to iwl_ucode_callback after we have safely got the firmware. The motivation to do this comes from a warning from lockdep which detected that we request priv->mutex while holding s_active during a sysfs request (show_statistics in the example copy pasted). The reverse order exists upon request_firmware: request_firmware which is a sysfs operation that requires s_active is run under priv->mutex. This ensures that we don't get sysfs request before we finish to request the firmware, avoiding this deadlock. ======================================================= [ INFO: possible circular locking dependency detected ] ------------------------------------------------------- cat/2595 is trying to acquire lock: (&priv->mutex){+.+.+.}, at: [] show_statistics+0x48/0x100 [iwlagn] but task is already holding lock: (s_active){++++.+}, at: [] sysfs_get_active_two+0x1d/0x50 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (s_active){++++.+}: [] __lock_acquire+0xc44/0x1230 [] lock_acquire+0x8d/0x110 [] sysfs_addrm_finish+0xe9/0x180 [] sysfs_hash_and_remove+0x4a/0x80 [] sysfs_remove_group+0x44/0xd0 [] dpm_sysfs_remove+0x15/0x20 [] device_del+0x38/0x170 [] device_unregister+0x1e/0x60 [] _request_firmware+0x29d/0x550 [] request_firmware+0x17/0x20 [] iwl_mac_start+0xb1/0x1230 [iwlagn] [] ieee80211_open+0x436/0x6f0 [mac80211] [] dev_open+0x92/0xf0 [] dev_change_flags+0x7b/0x190 [] do_setlink+0x178/0x3b0 [] rtnl_setlink+0xf9/0x130 [] rtnetlink_rcv_msg+0x1bb/0x1f0 [] netlink_rcv_skb+0x86/0xa0 [] rtnetlink_rcv+0x1c/0x30 [] netlink_unicast+0x263/0x290 [] netlink_sendmsg+0x1c8/0x2a0 [] sock_sendmsg+0xcd/0x100 [] sys_sendmsg+0x15d/0x290 [] sys_socketcall+0xeb/0x2a0 [] sysenter_do_call+0x12/0x38 -> #0 (&priv->mutex){+.+.+.}: [] __lock_acquire+0x1054/0x1230 [] lock_acquire+0x8d/0x110 [] __mutex_lock_common+0x58/0x470 [] mutex_lock_nested+0x3a/0x50 [] show_statistics+0x48/0x100 [iwlagn] [] dev_attr_show+0x29/0x50 [] sysfs_read_file+0xdd/0x190 [] vfs_read+0x9f/0x190 [] sys_read+0x42/0x70 [] sysenter_do_call+0x12/0x38 other info that might help us debug this: 3 locks held by cat/2595: #0: (&buffer->mutex){+.+.+.}, at: [] sysfs_read_file+0x35/0x190 #1: (s_active){++++.+}, at: [] sysfs_get_active_two+0x2d/0x50 #2: (s_active){++++.+}, at: [] sysfs_get_active_two+0x1d/0x50 stack backtrace: Pid: 2595, comm: cat Not tainted 2.6.33-tp-rc4 #2 Call Trace: [] ? printk+0x1d/0x22 [] print_circular_bug+0xc2/0xd0 [] __lock_acquire+0x1054/0x1230 [] ? sched_clock_cpu+0x121/0x180 [] lock_acquire+0x8d/0x110 [] ? show_statistics+0x48/0x100 [iwlagn] [] __mutex_lock_common+0x58/0x470 [] ? show_statistics+0x48/0x100 [iwlagn] [] mutex_lock_nested+0x3a/0x50 [] ? show_statistics+0x48/0x100 [iwlagn] [] show_statistics+0x48/0x100 [iwlagn] [] ? sysfs_get_active+0x69/0xb0 [] ? show_statistics+0x0/0x100 [iwlagn] [] dev_attr_show+0x29/0x50 [] sysfs_read_file+0xdd/0x190 [] ? security_file_permission+0x14/0x20 [] ? rw_verify_area+0x62/0xd0 [] vfs_read+0x9f/0x190 [] ? up_read+0x1b/0x30 [] ? sysfs_read_file+0x0/0x190 [] ? audit_syscall_entry+0x1f4/0x220 [] sys_read+0x42/0x70 [] sysenter_do_call+0x12/0x38 Signed-off-by: Emmanuel Grumbach Signed-off-by: Reinette Chatre diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.c b/drivers/net/wireless/iwlwifi/iwl-agn.c index aef4f71..7726e67 100644 --- a/drivers/net/wireless/iwlwifi/iwl-agn.c +++ b/drivers/net/wireless/iwlwifi/iwl-agn.c @@ -1484,6 +1484,156 @@ bool iwl_good_ack_health(struct iwl_priv *priv, } +/***************************************************************************** + * + * sysfs attributes + * + *****************************************************************************/ + +#ifdef CONFIG_IWLWIFI_DEBUG + +/* + * The following adds a new attribute to the sysfs representation + * of this device driver (i.e. a new file in /sys/class/net/wlan0/device/) + * used for controlling the debug level. + * + * See the level definitions in iwl for details. + * + * The debug_level being managed using sysfs below is a per device debug + * level that is used instead of the global debug level if it (the per + * device debug level) is set. + */ +static ssize_t show_debug_level(struct device *d, + struct device_attribute *attr, char *buf) +{ + struct iwl_priv *priv = dev_get_drvdata(d); + return sprintf(buf, "0x%08X\n", iwl_get_debug_level(priv)); +} +static ssize_t store_debug_level(struct device *d, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct iwl_priv *priv = dev_get_drvdata(d); + unsigned long val; + int ret; + + ret = strict_strtoul(buf, 0, &val); + if (ret) + IWL_ERR(priv, "%s is not in hex or decimal form.\n", buf); + else { + priv->debug_level = val; + if (iwl_alloc_traffic_mem(priv)) + IWL_ERR(priv, + "Not enough memory to generate traffic log\n"); + } + return strnlen(buf, count); +} + +static DEVICE_ATTR(debug_level, S_IWUSR | S_IRUGO, + show_debug_level, store_debug_level); + + +#endif /* CONFIG_IWLWIFI_DEBUG */ + + +static ssize_t show_temperature(struct device *d, + struct device_attribute *attr, char *buf) +{ + struct iwl_priv *priv = dev_get_drvdata(d); + + if (!iwl_is_alive(priv)) + return -EAGAIN; + + return sprintf(buf, "%d\n", priv->temperature); +} + +static DEVICE_ATTR(temperature, S_IRUGO, show_temperature, NULL); + +static ssize_t show_tx_power(struct device *d, + struct device_attribute *attr, char *buf) +{ + struct iwl_priv *priv = dev_get_drvdata(d); + + if (!iwl_is_ready_rf(priv)) + return sprintf(buf, "off\n"); + else + return sprintf(buf, "%d\n", priv->tx_power_user_lmt); +} + +static ssize_t store_tx_power(struct device *d, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct iwl_priv *priv = dev_get_drvdata(d); + unsigned long val; + int ret; + + ret = strict_strtoul(buf, 10, &val); + if (ret) + IWL_INFO(priv, "%s is not in decimal form.\n", buf); + else { + ret = iwl_set_tx_power(priv, val, false); + if (ret) + IWL_ERR(priv, "failed setting tx power (0x%d).\n", + ret); + else + ret = count; + } + return ret; +} + +static DEVICE_ATTR(tx_power, S_IWUSR | S_IRUGO, show_tx_power, store_tx_power); + +static ssize_t show_rts_ht_protection(struct device *d, + struct device_attribute *attr, char *buf) +{ + struct iwl_priv *priv = dev_get_drvdata(d); + + return sprintf(buf, "%s\n", + priv->cfg->use_rts_for_ht ? "RTS/CTS" : "CTS-to-self"); +} + +static ssize_t store_rts_ht_protection(struct device *d, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct iwl_priv *priv = dev_get_drvdata(d); + unsigned long val; + int ret; + + ret = strict_strtoul(buf, 10, &val); + if (ret) + IWL_INFO(priv, "Input is not in decimal form.\n"); + else { + if (!iwl_is_associated(priv)) + priv->cfg->use_rts_for_ht = val ? true : false; + else + IWL_ERR(priv, "Sta associated with AP - " + "Change protection mechanism is not allowed\n"); + ret = count; + } + return ret; +} + +static DEVICE_ATTR(rts_ht_protection, S_IWUSR | S_IRUGO, + show_rts_ht_protection, store_rts_ht_protection); + + +static struct attribute *iwl_sysfs_entries[] = { + &dev_attr_temperature.attr, + &dev_attr_tx_power.attr, + &dev_attr_rts_ht_protection.attr, +#ifdef CONFIG_IWLWIFI_DEBUG + &dev_attr_debug_level.attr, +#endif + NULL +}; + +static struct attribute_group iwl_attribute_group = { + .name = NULL, /* put in device directory */ + .attrs = iwl_sysfs_entries, +}; + /****************************************************************************** * * uCode download functions @@ -1965,6 +2115,13 @@ static void iwl_ucode_callback(const struct firmware *ucode_raw, void *context) if (err) IWL_ERR(priv, "failed to create debugfs files. Ignoring error: %d\n", err); + err = sysfs_create_group(&priv->pci_dev->dev.kobj, + &iwl_attribute_group); + if (err) { + IWL_ERR(priv, "failed to create sysfs device attributes\n"); + goto out_unbind; + } + /* We have our copies now, allow OS release its copies */ release_firmware(ucode_raw); complete(&priv->_agn.firmware_loading_complete); @@ -3264,141 +3421,6 @@ static int iwlagn_mac_sta_add(struct ieee80211_hw *hw, /***************************************************************************** * - * sysfs attributes - * - *****************************************************************************/ - -#ifdef CONFIG_IWLWIFI_DEBUG - -/* - * The following adds a new attribute to the sysfs representation - * of this device driver (i.e. a new file in /sys/class/net/wlan0/device/) - * used for controlling the debug level. - * - * See the level definitions in iwl for details. - * - * The debug_level being managed using sysfs below is a per device debug - * level that is used instead of the global debug level if it (the per - * device debug level) is set. - */ -static ssize_t show_debug_level(struct device *d, - struct device_attribute *attr, char *buf) -{ - struct iwl_priv *priv = dev_get_drvdata(d); - return sprintf(buf, "0x%08X\n", iwl_get_debug_level(priv)); -} -static ssize_t store_debug_level(struct device *d, - struct device_attribute *attr, - const char *buf, size_t count) -{ - struct iwl_priv *priv = dev_get_drvdata(d); - unsigned long val; - int ret; - - ret = strict_strtoul(buf, 0, &val); - if (ret) - IWL_ERR(priv, "%s is not in hex or decimal form.\n", buf); - else { - priv->debug_level = val; - if (iwl_alloc_traffic_mem(priv)) - IWL_ERR(priv, - "Not enough memory to generate traffic log\n"); - } - return strnlen(buf, count); -} - -static DEVICE_ATTR(debug_level, S_IWUSR | S_IRUGO, - show_debug_level, store_debug_level); - - -#endif /* CONFIG_IWLWIFI_DEBUG */ - - -static ssize_t show_temperature(struct device *d, - struct device_attribute *attr, char *buf) -{ - struct iwl_priv *priv = dev_get_drvdata(d); - - if (!iwl_is_alive(priv)) - return -EAGAIN; - - return sprintf(buf, "%d\n", priv->temperature); -} - -static DEVICE_ATTR(temperature, S_IRUGO, show_temperature, NULL); - -static ssize_t show_tx_power(struct device *d, - struct device_attribute *attr, char *buf) -{ - struct iwl_priv *priv = dev_get_drvdata(d); - - if (!iwl_is_ready_rf(priv)) - return sprintf(buf, "off\n"); - else - return sprintf(buf, "%d\n", priv->tx_power_user_lmt); -} - -static ssize_t store_tx_power(struct device *d, - struct device_attribute *attr, - const char *buf, size_t count) -{ - struct iwl_priv *priv = dev_get_drvdata(d); - unsigned long val; - int ret; - - ret = strict_strtoul(buf, 10, &val); - if (ret) - IWL_INFO(priv, "%s is not in decimal form.\n", buf); - else { - ret = iwl_set_tx_power(priv, val, false); - if (ret) - IWL_ERR(priv, "failed setting tx power (0x%d).\n", - ret); - else - ret = count; - } - return ret; -} - -static DEVICE_ATTR(tx_power, S_IWUSR | S_IRUGO, show_tx_power, store_tx_power); - -static ssize_t show_rts_ht_protection(struct device *d, - struct device_attribute *attr, char *buf) -{ - struct iwl_priv *priv = dev_get_drvdata(d); - - return sprintf(buf, "%s\n", - priv->cfg->use_rts_for_ht ? "RTS/CTS" : "CTS-to-self"); -} - -static ssize_t store_rts_ht_protection(struct device *d, - struct device_attribute *attr, - const char *buf, size_t count) -{ - struct iwl_priv *priv = dev_get_drvdata(d); - unsigned long val; - int ret; - - ret = strict_strtoul(buf, 10, &val); - if (ret) - IWL_INFO(priv, "Input is not in decimal form.\n"); - else { - if (!iwl_is_associated(priv)) - priv->cfg->use_rts_for_ht = val ? true : false; - else - IWL_ERR(priv, "Sta associated with AP - " - "Change protection mechanism is not allowed\n"); - ret = count; - } - return ret; -} - -static DEVICE_ATTR(rts_ht_protection, S_IWUSR | S_IRUGO, - show_rts_ht_protection, store_rts_ht_protection); - - -/***************************************************************************** - * * driver setup and teardown * *****************************************************************************/ @@ -3550,21 +3572,6 @@ static void iwl_uninit_drv(struct iwl_priv *priv) kfree(priv->scan_cmd); } -static struct attribute *iwl_sysfs_entries[] = { - &dev_attr_temperature.attr, - &dev_attr_tx_power.attr, - &dev_attr_rts_ht_protection.attr, -#ifdef CONFIG_IWLWIFI_DEBUG - &dev_attr_debug_level.attr, -#endif - NULL -}; - -static struct attribute_group iwl_attribute_group = { - .name = NULL, /* put in device directory */ - .attrs = iwl_sysfs_entries, -}; - static struct ieee80211_ops iwl_hw_ops = { .tx = iwl_mac_tx, .start = iwl_mac_start, @@ -3750,11 +3757,6 @@ static int iwl_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent) IWL_ERR(priv, "Error allocating IRQ %d\n", priv->pci_dev->irq); goto out_disable_msi; } - err = sysfs_create_group(&pdev->dev.kobj, &iwl_attribute_group); - if (err) { - IWL_ERR(priv, "failed to create sysfs device attributes\n"); - goto out_free_irq; - } iwl_setup_deferred_work(priv); iwl_setup_rx_handlers(priv); @@ -3788,15 +3790,13 @@ static int iwl_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent) err = iwl_request_firmware(priv, true); if (err) - goto out_remove_sysfs; + goto out_destroy_workqueue; return 0; - out_remove_sysfs: + out_destroy_workqueue: destroy_workqueue(priv->workqueue); priv->workqueue = NULL; - sysfs_remove_group(&pdev->dev.kobj, &iwl_attribute_group); - out_free_irq: free_irq(priv->pci_dev->irq, priv); iwl_free_isr_ict(priv); out_disable_msi: -- cgit v0.10.2 From aa679c36756003f1fabdb9fc6f00eb159559f7c3 Mon Sep 17 00:00:00 2001 From: Grazvydas Ignotas Date: Sat, 5 Jun 2010 02:25:47 +0300 Subject: wl1251: fix a memory leak in probe wl1251_sdio_probe() error path is missing wl1251_free_hw, add it. Signed-off-by: Grazvydas Ignotas Acked-by: Kalle Valo Cc: stable@kernel.org Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/wl12xx/wl1251_sdio.c b/drivers/net/wireless/wl12xx/wl1251_sdio.c index d234285..c561332 100644 --- a/drivers/net/wireless/wl12xx/wl1251_sdio.c +++ b/drivers/net/wireless/wl12xx/wl1251_sdio.c @@ -259,6 +259,7 @@ disable: sdio_disable_func(func); release: sdio_release_host(func); + wl1251_free_hw(wl); return ret; } -- cgit v0.10.2 From 0f666a08901f8b01f294ca0ad751019375240ae3 Mon Sep 17 00:00:00 2001 From: Jason Dravet Date: Sat, 5 Jun 2010 15:08:29 -0500 Subject: p54usb: Add device ID for Dell WLA3310 USB Add Dell WLA3310 USB wireless card, which has a Z-Com XG-705A chipset, to the USB Ids in p54usb. Signed-off-by: Jason Dravet Tested-by: Richard Gregory Tillmore Signed-off-by: Larry Finger Acked-by: Christian Lamparter Cc: Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/p54/p54usb.c b/drivers/net/wireless/p54/p54usb.c index d5b197b..7307325 100644 --- a/drivers/net/wireless/p54/p54usb.c +++ b/drivers/net/wireless/p54/p54usb.c @@ -80,6 +80,7 @@ static struct usb_device_id p54u_table[] __devinitdata = { {USB_DEVICE(0x1413, 0x5400)}, /* Telsey 802.11g USB2.0 Adapter */ {USB_DEVICE(0x1435, 0x0427)}, /* Inventel UR054G */ {USB_DEVICE(0x2001, 0x3704)}, /* DLink DWL-G122 rev A2 */ + {USB_DEVICE(0x413c, 0x5513)}, /* Dell WLA3310 USB Wireless Adapter */ {USB_DEVICE(0x413c, 0x8102)}, /* Spinnaker DUT */ {USB_DEVICE(0x413c, 0x8104)}, /* Cohiba Proto board */ {} -- cgit v0.10.2 From 436c109adb54433fff689abd71c23a6505e46bb0 Mon Sep 17 00:00:00 2001 From: Bruno Randolf Date: Mon, 7 Jun 2010 13:11:19 +0900 Subject: ath5k: fix NULL pointer in antenna configuration If the channel is not set yet and we configure the antennas just store the setting. It will be activated during the next reset, when the channel is set. Signed-off-by: Bruno Randolf Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ath/ath5k/phy.c b/drivers/net/wireless/ath/ath5k/phy.c index 1b81c47..492cbb1 100644 --- a/drivers/net/wireless/ath/ath5k/phy.c +++ b/drivers/net/wireless/ath/ath5k/phy.c @@ -1814,6 +1814,13 @@ ath5k_hw_set_antenna_mode(struct ath5k_hw *ah, u8 ant_mode) u8 def_ant, tx_ant, ee_mode; u32 sta_id1 = 0; + /* if channel is not initialized yet we can't set the antennas + * so just store the mode. it will be set on the next reset */ + if (channel == NULL) { + ah->ah_ant_mode = ant_mode; + return; + } + def_ant = ah->ah_def_ant; ATH5K_TRACE(ah->ah_sc); -- cgit v0.10.2 From e500ae5b535a5209fd397fcc542e3b3290fc2fc5 Mon Sep 17 00:00:00 2001 From: Zhu Yi Date: Mon, 7 Jun 2010 14:15:43 +0800 Subject: wireless: remove my name from the maintainer list Remove my name from the MAINTAINERS file. Signed-off-by: Zhu Yi Signed-off-by: John W. Linville diff --git a/MAINTAINERS b/MAINTAINERS index 8d51903..83be538 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -2966,7 +2966,6 @@ F: drivers/net/ixgb/ F: drivers/net/ixgbe/ INTEL PRO/WIRELESS 2100 NETWORK CONNECTION SUPPORT -M: Zhu Yi M: Reinette Chatre M: Intel Linux Wireless L: linux-wireless@vger.kernel.org @@ -2976,7 +2975,6 @@ F: Documentation/networking/README.ipw2100 F: drivers/net/wireless/ipw2x00/ipw2100.* INTEL PRO/WIRELESS 2915ABG NETWORK CONNECTION SUPPORT -M: Zhu Yi M: Reinette Chatre M: Intel Linux Wireless L: linux-wireless@vger.kernel.org @@ -3007,7 +3005,6 @@ F: drivers/net/wimax/i2400m/ F: include/linux/wimax/i2400m.h INTEL WIRELESS WIFI LINK (iwlwifi) -M: Zhu Yi M: Reinette Chatre M: Wey-Yi Guy M: Intel Linux Wireless @@ -3019,7 +3016,6 @@ F: drivers/net/wireless/iwlwifi/ INTEL WIRELESS MULTICOMM 3200 WIFI (iwmc3200wifi) M: Samuel Ortiz -M: Zhu Yi M: Intel Linux Wireless L: linux-wireless@vger.kernel.org S: Supported -- cgit v0.10.2 From 35dd0509b21e4b5bab36b9eb80c8dab0322f5007 Mon Sep 17 00:00:00 2001 From: Holger Schurig Date: Mon, 7 Jun 2010 16:33:49 +0200 Subject: mac80211: fix function pointer check This makes "iw wlan0 dump survey" work again with mac80211-based drivers that support it, e.g. ath5k. Signed-off-by: Holger Schurig Signed-off-by: John W. Linville diff --git a/net/mac80211/driver-ops.h b/net/mac80211/driver-ops.h index 4f22713..9c1da08 100644 --- a/net/mac80211/driver-ops.h +++ b/net/mac80211/driver-ops.h @@ -349,7 +349,7 @@ static inline int drv_get_survey(struct ieee80211_local *local, int idx, struct survey_info *survey) { int ret = -EOPNOTSUPP; - if (local->ops->conf_tx) + if (local->ops->get_survey) ret = local->ops->get_survey(&local->hw, idx, survey); /* trace_drv_get_survey(local, idx, survey, ret); */ return ret; -- cgit v0.10.2 From 6db6340c42d027b6364d49fa99d69019aca24de4 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Mon, 7 Jun 2010 21:20:38 +0200 Subject: iwlwifi: add missing rcu_read_lock Using ieee80211_find_sta() needs to be under RCU read lock, which iwlwifi currently misses, so fix it. Cc: stable@kernel.org Reported-by: Miles Lane Signed-off-by: Johannes Berg Acked-by: Reinette Chatre Tested-by: Miles Lane Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-tx.c b/drivers/net/wireless/iwlwifi/iwl-agn-tx.c index c402bfc..a732f10 100644 --- a/drivers/net/wireless/iwlwifi/iwl-agn-tx.c +++ b/drivers/net/wireless/iwlwifi/iwl-agn-tx.c @@ -1125,6 +1125,7 @@ static void iwlagn_tx_status(struct iwl_priv *priv, struct sk_buff *skb) struct ieee80211_sta *sta; struct iwl_station_priv *sta_priv; + rcu_read_lock(); sta = ieee80211_find_sta(priv->vif, hdr->addr1); if (sta) { sta_priv = (void *)sta->drv_priv; @@ -1133,6 +1134,7 @@ static void iwlagn_tx_status(struct iwl_priv *priv, struct sk_buff *skb) atomic_dec_return(&sta_priv->pending_frames) == 0) ieee80211_sta_block_awake(priv->hw, sta, false); } + rcu_read_unlock(); ieee80211_tx_status_irqsafe(priv->hw, skb); } -- cgit v0.10.2 From b054b747a694927879c94dd11af54d04346aed7d Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Mon, 7 Jun 2010 21:50:07 +0200 Subject: mac80211: fix deauth before assoc When we receive a deauthentication frame before having successfully associated, we neither print a message nor abort assocation. The former makes it hard to debug, while the latter later causes a warning in cfg80211 when, as will typically be the case, association timed out. This warning was reported by many, e.g. in https://bugzilla.kernel.org/show_bug.cgi?id=15981, but I couldn't initially pinpoint it. I verified the fix by hacking hostapd to send a deauth frame instead of an association response. Cc: stable@kernel.org Signed-off-by: Johannes Berg Tested-by: Miles Lane Signed-off-by: John W. Linville diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index 3310e70..f803f8b 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -1760,9 +1760,45 @@ static void ieee80211_sta_rx_queued_mgmt(struct ieee80211_sub_if_data *sdata, mutex_unlock(&ifmgd->mtx); if (skb->len >= 24 + 2 /* mgmt + deauth reason */ && - (fc & IEEE80211_FCTL_STYPE) == IEEE80211_STYPE_DEAUTH) - cfg80211_send_deauth(sdata->dev, (u8 *)mgmt, skb->len); + (fc & IEEE80211_FCTL_STYPE) == IEEE80211_STYPE_DEAUTH) { + struct ieee80211_local *local = sdata->local; + struct ieee80211_work *wk; + + mutex_lock(&local->work_mtx); + list_for_each_entry(wk, &local->work_list, list) { + if (wk->sdata != sdata) + continue; + + if (wk->type != IEEE80211_WORK_ASSOC) + continue; + + if (memcmp(mgmt->bssid, wk->filter_ta, ETH_ALEN)) + continue; + if (memcmp(mgmt->sa, wk->filter_ta, ETH_ALEN)) + continue; + /* + * Printing the message only here means we can't + * spuriously print it, but it also means that it + * won't be printed when the frame comes in before + * we even tried to associate or in similar cases. + * + * Ultimately, I suspect cfg80211 should print the + * messages instead. + */ + printk(KERN_DEBUG + "%s: deauthenticated from %pM (Reason: %u)\n", + sdata->name, mgmt->bssid, + le16_to_cpu(mgmt->u.deauth.reason_code)); + + list_del_rcu(&wk->list); + free_work(wk); + break; + } + mutex_unlock(&local->work_mtx); + + cfg80211_send_deauth(sdata->dev, (u8 *)mgmt, skb->len); + } out: kfree_skb(skb); } -- cgit v0.10.2