From 34bfff404ca2eb2f0e60f82f301ad6abcdd22150 Mon Sep 17 00:00:00 2001 From: "Lendacky, Thomas" Date: Thu, 14 May 2015 11:44:21 -0500 Subject: amd-xgbe: Support defining PHY resources in ETH device node Simplify the device tree support of the amd-xgbe driver by defining the PHY-related resources within the ethernet device node. The support provides backwards compatibility with the original way. Update the driver version to 1.0.2. Signed-off-by: Tom Lendacky Signed-off-by: David S. Miller diff --git a/Documentation/devicetree/bindings/net/amd-xgbe.txt b/Documentation/devicetree/bindings/net/amd-xgbe.txt index 5dbc55a..4bb624a 100644 --- a/Documentation/devicetree/bindings/net/amd-xgbe.txt +++ b/Documentation/devicetree/bindings/net/amd-xgbe.txt @@ -1,16 +1,20 @@ * AMD 10GbE driver (amd-xgbe) -Required properties (ethernet device): +Required properties: - compatible: Should be "amd,xgbe-seattle-v1a" - reg: Address and length of the register sets for the device - MAC registers - PCS registers + - SerDes Rx/Tx registers + - SerDes integration registers (1/2) + - SerDes integration registers (2/2) - interrupt-parent: Should be the phandle for the interrupt controller that services interrupts for this device - interrupts: Should contain the amd-xgbe interrupt(s). The first interrupt listed is required and is the general device interrupt. If the optional amd,per-channel-interrupt property is specified, then one additional - interrupt for each DMA channel supported by the device should be specified + interrupt for each DMA channel supported by the device should be specified. + The last interrupt listed should be the PCS auto-negotiation interrupt. - clocks: - DMA clock for the amd-xgbe device (used for calculating the correct Rx interrupt watchdog timer value on a DMA channel @@ -19,28 +23,15 @@ Required properties (ethernet device): - clock-names: Should be the names of the clocks - "dma_clk" for the DMA clock - "ptp_clk" for the PTP clock -- phy-handle: See ethernet.txt file in the same directory - phy-mode: See ethernet.txt file in the same directory -Optional properties (ethernet device): +Optional properties: - mac-address: mac address to be assigned to the device. Can be overridden by UEFI. - dma-coherent: Present if dma operations are coherent - amd,per-channel-interrupt: Indicates that Rx and Tx complete will generate a unique interrupt for each DMA channel - this requires an additional interrupt be configured for each DMA channel - -Required properties (phy device): -- compatible: Should be "amd,xgbe-phy-seattle-v1a" -- reg: Address and length of the register sets for the device - - SerDes Rx/Tx registers - - SerDes integration registers (1/2) - - SerDes integration registers (2/2) -- interrupt-parent: Should be the phandle for the interrupt controller - that services interrupts for this device -- interrupts: Should contain the amd-xgbe-phy interrupt. - -Optional properties (phy device): - amd,speed-set: Speed capabilities of the device 0 - 1GbE and 10GbE (default) 1 - 2.5GbE and 10GbE @@ -63,25 +54,19 @@ Example: xgbe@e0700000 { compatible = "amd,xgbe-seattle-v1a"; reg = <0 0xe0700000 0 0x80000>, - <0 0xe0780000 0 0x80000>; + <0 0xe0780000 0 0x80000>, + <0 0xe1240800 0 0x00400>, + <0 0xe1250000 0 0x00060>, + <0 0xe1250080 0 0x00004>; interrupt-parent = <&gic>; interrupts = <0 325 4>, - <0 326 1>, <0 327 1>, <0 328 1>, <0 329 1>; + <0 326 1>, <0 327 1>, <0 328 1>, <0 329 1>, + <0 323 4>; amd,per-channel-interrupt; clocks = <&xgbe_dma_clk>, <&xgbe_ptp_clk>; clock-names = "dma_clk", "ptp_clk"; - phy-handle = <&xgbe_phy>; phy-mode = "xgmii"; mac-address = [ 02 a1 a2 a3 a4 a5 ]; - }; - - xgbe_phy@e1240800 { - compatible = "amd,xgbe-phy-seattle-v1a"; - reg = <0 0xe1240800 0 0x00400>, - <0 0xe1250000 0 0x00060>, - <0 0xe1250080 0 0x00004>; - interrupt-parent = <&gic>; - interrupts = <0 323 4>; amd,speed-set = <0>; amd,serdes-blwc = <1>, <1>, <0>; amd,serdes-cdr-rate = <2>, <2>, <7>; diff --git a/drivers/net/ethernet/amd/xgbe/xgbe-main.c b/drivers/net/ethernet/amd/xgbe/xgbe-main.c index 0c219b3..34c521d 100644 --- a/drivers/net/ethernet/amd/xgbe/xgbe-main.c +++ b/drivers/net/ethernet/amd/xgbe/xgbe-main.c @@ -300,14 +300,21 @@ static struct platform_device *xgbe_of_get_phy_pdev(struct xgbe_prv_data *pdata) struct platform_device *phy_pdev; phy_node = of_parse_phandle(dev->of_node, "phy-handle", 0); - if (!phy_node) { - dev_err(dev, "unable to locate phy device\n"); - return NULL; + if (phy_node) { + /* Old style device tree: + * The XGBE and PHY resources are separate + */ + phy_pdev = of_find_device_by_node(phy_node); + of_node_put(phy_node); + } else { + /* New style device tree: + * The XGBE and PHY resources are grouped together with + * the PHY resources listed last + */ + get_device(dev); + phy_pdev = pdata->pdev; } - phy_pdev = of_find_device_by_node(phy_node); - of_node_put(phy_node); - return phy_pdev; } #else /* CONFIG_OF */ @@ -401,14 +408,14 @@ static int xgbe_probe(struct platform_device *pdev) phy_dev = &phy_pdev->dev; if (pdev == phy_pdev) { - /* ACPI: + /* New style device tree or ACPI: * The XGBE and PHY resources are grouped together with * the PHY resources listed last */ phy_memnum = xgbe_resource_count(pdev, IORESOURCE_MEM) - 3; phy_irqnum = xgbe_resource_count(pdev, IORESOURCE_IRQ) - 1; } else { - /* Device tree: + /* Old style device tree: * The XGBE and PHY resources are separate */ phy_memnum = 0; diff --git a/drivers/net/ethernet/amd/xgbe/xgbe.h b/drivers/net/ethernet/amd/xgbe/xgbe.h index b6aecc9..f535d19 100644 --- a/drivers/net/ethernet/amd/xgbe/xgbe.h +++ b/drivers/net/ethernet/amd/xgbe/xgbe.h @@ -129,7 +129,7 @@ #include #define XGBE_DRV_NAME "amd-xgbe" -#define XGBE_DRV_VERSION "1.0.1" +#define XGBE_DRV_VERSION "1.0.2" #define XGBE_DRV_DESC "AMD 10 Gigabit Ethernet Driver" /* Descriptor related defines */ -- cgit v0.10.2