From 1678847ec93040ae8280d19c42ae0ba8a4233e6d Mon Sep 17 00:00:00 2001 From: Finn Thain Date: Tue, 23 Feb 2016 10:07:05 +1100 Subject: ncr5380: Dont release lock for PIO transfer The calls to NCR5380_transfer_pio() for DATA IN and DATA OUT phases will modify cmd->SCp.this_residual, cmd->SCp.ptr and cmd->SCp.buffer. That works as long as EH does not intervene, which became possible in atari_NCR5380.c when I changed the locking to bring it closer to NCR5380.c. If error recovery aborts the command, the scsi_cmnd in question and its buffer will be returned to the mid-layer. So the transfer has to cease, but it can't be stopped by the initiator because the target controls the bus phase. The problem does not arise if the lock is not released. That was fine for atari_scsi, because it implements DMA. For the other drivers, we have to release the lock and re-enable interrupts for long PIO data transfers. The solution is to split the transfer into small chunks. In between chunks the main loop releases the lock and re-enables interrupts. Thus interrupts can be serviced and eh_bus_reset_handler can intervene if need be. This fixes an oops in NCR5380_transfer_pio() that can happen when the EH abort handler is invoked during DATA IN or DATA OUT phase. Fixes: 11d2f63b9cf5 ("ncr5380: Change instance->host_lock to hostdata->lock") Reported-and-tested-by: Michael Schmitz Cc: # 4.5 Signed-off-by: Finn Thain Signed-off-by: Martin K. Petersen diff --git a/drivers/scsi/NCR5380.c b/drivers/scsi/NCR5380.c index ce577f4..0e00d48 100644 --- a/drivers/scsi/NCR5380.c +++ b/drivers/scsi/NCR5380.c @@ -1759,9 +1759,7 @@ static void NCR5380_information_transfer(struct Scsi_Host *instance) unsigned char msgout = NOP; int sink = 0; int len; -#if defined(PSEUDO_DMA) || defined(REAL_DMA_POLL) int transfersize; -#endif unsigned char *data; unsigned char phase, tmp, extended_msg[10], old_phase = 0xff; struct scsi_cmnd *cmd; @@ -1854,13 +1852,17 @@ static void NCR5380_information_transfer(struct Scsi_Host *instance) } else #endif /* defined(PSEUDO_DMA) || defined(REAL_DMA_POLL) */ { - spin_unlock_irq(&hostdata->lock); - NCR5380_transfer_pio(instance, &phase, - (int *)&cmd->SCp.this_residual, + /* Break up transfer into 3 ms chunks, + * presuming 6 accesses per handshake. + */ + transfersize = min((unsigned long)cmd->SCp.this_residual, + hostdata->accesses_per_ms / 2); + len = transfersize; + NCR5380_transfer_pio(instance, &phase, &len, (unsigned char **)&cmd->SCp.ptr); - spin_lock_irq(&hostdata->lock); + cmd->SCp.this_residual -= transfersize - len; } - break; + return; case PHASE_MSGIN: len = 1; data = &tmp; diff --git a/drivers/scsi/atari_NCR5380.c b/drivers/scsi/atari_NCR5380.c index af04218..d382e71 100644 --- a/drivers/scsi/atari_NCR5380.c +++ b/drivers/scsi/atari_NCR5380.c @@ -1838,9 +1838,7 @@ static void NCR5380_information_transfer(struct Scsi_Host *instance) unsigned char msgout = NOP; int sink = 0; int len; -#if defined(REAL_DMA) int transfersize; -#endif unsigned char *data; unsigned char phase, tmp, extended_msg[10], old_phase = 0xff; struct scsi_cmnd *cmd; @@ -1983,18 +1981,22 @@ static void NCR5380_information_transfer(struct Scsi_Host *instance) } else #endif /* defined(REAL_DMA) */ { - spin_unlock_irq(&hostdata->lock); - NCR5380_transfer_pio(instance, &phase, - (int *)&cmd->SCp.this_residual, + /* Break up transfer into 3 ms chunks, + * presuming 6 accesses per handshake. + */ + transfersize = min((unsigned long)cmd->SCp.this_residual, + hostdata->accesses_per_ms / 2); + len = transfersize; + NCR5380_transfer_pio(instance, &phase, &len, (unsigned char **)&cmd->SCp.ptr); - spin_lock_irq(&hostdata->lock); + cmd->SCp.this_residual -= transfersize - len; } #if defined(CONFIG_SUN3) && defined(REAL_DMA) /* if we had intended to dma that command clear it */ if (sun3_dma_setup_done == cmd) sun3_dma_setup_done = NULL; #endif - break; + return; case PHASE_MSGIN: len = 1; data = &tmp; -- cgit v0.10.2