From 04bea68b2f0eeebb089ecc67b618795925268b4a Mon Sep 17 00:00:00 2001 From: Sebastian Andrzej Siewior Date: Mon, 24 Jan 2011 09:58:55 +0530 Subject: of/pci: move of_irq_map_pci() into generic code There is a tiny difference between PPC32 and PPC64. Microblaze uses the PPC32 variant. Signed-off-by: Sebastian Andrzej Siewior [grant.likely@secretlab.ca: Added comment to #endif, moved documentation block to function implementation, fixed for non ppc and microblaze compiles] Signed-off-by: Grant Likely diff --git a/arch/microblaze/include/asm/pci-bridge.h b/arch/microblaze/include/asm/pci-bridge.h index 0c68764..1071766 100644 --- a/arch/microblaze/include/asm/pci-bridge.h +++ b/arch/microblaze/include/asm/pci-bridge.h @@ -104,11 +104,22 @@ struct pci_controller { int global_number; /* PCI domain number */ }; +#ifdef CONFIG_PCI static inline struct pci_controller *pci_bus_to_host(const struct pci_bus *bus) { return bus->sysdata; } +static inline struct device_node *pci_bus_to_OF_node(struct pci_bus *bus) +{ + struct pci_controller *host; + + if (bus->self) + return pci_device_to_OF_node(bus->self); + host = pci_bus_to_host(bus); + return host ? host->dn : NULL; +} + static inline int isa_vaddr_is_ioport(void __iomem *address) { /* No specific ISA handling on ppc32 at this stage, it @@ -116,6 +127,7 @@ static inline int isa_vaddr_is_ioport(void __iomem *address) */ return 0; } +#endif /* CONFIG_PCI */ /* These are used for config access before all the PCI probing has been done. */ diff --git a/arch/microblaze/include/asm/prom.h b/arch/microblaze/include/asm/prom.h index 2e72af0..d0890d3 100644 --- a/arch/microblaze/include/asm/prom.h +++ b/arch/microblaze/include/asm/prom.h @@ -64,21 +64,6 @@ extern void kdump_move_device_tree(void); /* CPU OF node matching */ struct device_node *of_get_cpu_node(int cpu, unsigned int *thread); -/** - * of_irq_map_pci - Resolve the interrupt for a PCI device - * @pdev: the device whose interrupt is to be resolved - * @out_irq: structure of_irq filled by this function - * - * This function resolves the PCI interrupt for a given PCI device. If a - * device-node exists for a given pci_dev, it will use normal OF tree - * walking. If not, it will implement standard swizzling and walk up the - * PCI tree until an device-node is found, at which point it will finish - * resolving using the OF tree walking. - */ -struct pci_dev; -struct of_irq; -extern int of_irq_map_pci(struct pci_dev *pdev, struct of_irq *out_irq); - #endif /* __ASSEMBLY__ */ #endif /* __KERNEL__ */ diff --git a/arch/microblaze/kernel/prom_parse.c b/arch/microblaze/kernel/prom_parse.c index 9ae24f4..47187cc 100644 --- a/arch/microblaze/kernel/prom_parse.c +++ b/arch/microblaze/kernel/prom_parse.c @@ -2,88 +2,11 @@ #include #include -#include #include #include #include #include #include -#include - -#ifdef CONFIG_PCI -int of_irq_map_pci(struct pci_dev *pdev, struct of_irq *out_irq) -{ - struct device_node *dn, *ppnode; - struct pci_dev *ppdev; - u32 lspec; - u32 laddr[3]; - u8 pin; - int rc; - - /* Check if we have a device node, if yes, fallback to standard OF - * parsing - */ - dn = pci_device_to_OF_node(pdev); - if (dn) - return of_irq_map_one(dn, 0, out_irq); - - /* Ok, we don't, time to have fun. Let's start by building up an - * interrupt spec. we assume #interrupt-cells is 1, which is standard - * for PCI. If you do different, then don't use that routine. - */ - rc = pci_read_config_byte(pdev, PCI_INTERRUPT_PIN, &pin); - if (rc != 0) - return rc; - /* No pin, exit */ - if (pin == 0) - return -ENODEV; - - /* Now we walk up the PCI tree */ - lspec = pin; - for (;;) { - /* Get the pci_dev of our parent */ - ppdev = pdev->bus->self; - - /* Ouch, it's a host bridge... */ - if (ppdev == NULL) { - struct pci_controller *host; - host = pci_bus_to_host(pdev->bus); - ppnode = host ? host->dn : NULL; - /* No node for host bridge ? give up */ - if (ppnode == NULL) - return -EINVAL; - } else - /* We found a P2P bridge, check if it has a node */ - ppnode = pci_device_to_OF_node(ppdev); - - /* Ok, we have found a parent with a device-node, hand over to - * the OF parsing code. - * We build a unit address from the linux device to be used for - * resolution. Note that we use the linux bus number which may - * not match your firmware bus numbering. - * Fortunately, in most cases, interrupt-map-mask doesn't - * include the bus number as part of the matching. - * You should still be careful about that though if you intend - * to rely on this function (you ship a firmware that doesn't - * create device nodes for all PCI devices). - */ - if (ppnode) - break; - - /* We can only get here if we hit a P2P bridge with no node, - * let's do standard swizzling and try again - */ - lspec = pci_swizzle_interrupt_pin(pdev, lspec); - pdev = ppdev; - } - - laddr[0] = (pdev->bus->number << 16) - | (pdev->devfn << 8); - laddr[1] = laddr[2] = 0; - return of_irq_map_raw(ppnode, &lspec, 1, laddr, out_irq); -} -EXPORT_SYMBOL_GPL(of_irq_map_pci); -#endif /* CONFIG_PCI */ void of_parse_dma_window(struct device_node *dn, const void *dma_window_prop, unsigned long *busno, unsigned long *phys, unsigned long *size) diff --git a/arch/microblaze/pci/pci-common.c b/arch/microblaze/pci/pci-common.c index e363615..1e01a12 100644 --- a/arch/microblaze/pci/pci-common.c +++ b/arch/microblaze/pci/pci-common.c @@ -29,6 +29,7 @@ #include #include #include +#include #include #include diff --git a/arch/powerpc/include/asm/pci-bridge.h b/arch/powerpc/include/asm/pci-bridge.h index 51e9e6f..edeb80f 100644 --- a/arch/powerpc/include/asm/pci-bridge.h +++ b/arch/powerpc/include/asm/pci-bridge.h @@ -171,6 +171,16 @@ static inline struct pci_controller *pci_bus_to_host(const struct pci_bus *bus) return bus->sysdata; } +static inline struct device_node *pci_bus_to_OF_node(struct pci_bus *bus) +{ + struct pci_controller *host; + + if (bus->self) + return pci_device_to_OF_node(bus->self); + host = pci_bus_to_host(bus); + return host ? host->dn : NULL; +} + static inline int isa_vaddr_is_ioport(void __iomem *address) { /* No specific ISA handling on ppc32 at this stage, it diff --git a/arch/powerpc/include/asm/prom.h b/arch/powerpc/include/asm/prom.h index d727575..c189aa5 100644 --- a/arch/powerpc/include/asm/prom.h +++ b/arch/powerpc/include/asm/prom.h @@ -70,21 +70,6 @@ static inline int of_node_to_nid(struct device_node *device) { return 0; } #endif #define of_node_to_nid of_node_to_nid -/** - * of_irq_map_pci - Resolve the interrupt for a PCI device - * @pdev: the device whose interrupt is to be resolved - * @out_irq: structure of_irq filled by this function - * - * This function resolves the PCI interrupt for a given PCI device. If a - * device-node exists for a given pci_dev, it will use normal OF tree - * walking. If not, it will implement standard swizzling and walk up the - * PCI tree until an device-node is found, at which point it will finish - * resolving using the OF tree walking. - */ -struct pci_dev; -struct of_irq; -extern int of_irq_map_pci(struct pci_dev *pdev, struct of_irq *out_irq); - extern void of_instantiate_rtc(void); /* These includes are put at the bottom because they may contain things diff --git a/arch/powerpc/kernel/pci-common.c b/arch/powerpc/kernel/pci-common.c index 10a44e6..eb341be 100644 --- a/arch/powerpc/kernel/pci-common.c +++ b/arch/powerpc/kernel/pci-common.c @@ -22,6 +22,7 @@ #include #include #include +#include #include #include #include diff --git a/arch/powerpc/kernel/prom_parse.c b/arch/powerpc/kernel/prom_parse.c index c2b7a07..47187cc 100644 --- a/arch/powerpc/kernel/prom_parse.c +++ b/arch/powerpc/kernel/prom_parse.c @@ -2,95 +2,11 @@ #include #include -#include #include #include #include #include #include -#include - -#ifdef CONFIG_PCI -int of_irq_map_pci(struct pci_dev *pdev, struct of_irq *out_irq) -{ - struct device_node *dn, *ppnode; - struct pci_dev *ppdev; - u32 lspec; - u32 laddr[3]; - u8 pin; - int rc; - - /* Check if we have a device node, if yes, fallback to standard OF - * parsing - */ - dn = pci_device_to_OF_node(pdev); - if (dn) { - rc = of_irq_map_one(dn, 0, out_irq); - if (!rc) - return rc; - } - - /* Ok, we don't, time to have fun. Let's start by building up an - * interrupt spec. we assume #interrupt-cells is 1, which is standard - * for PCI. If you do different, then don't use that routine. - */ - rc = pci_read_config_byte(pdev, PCI_INTERRUPT_PIN, &pin); - if (rc != 0) - return rc; - /* No pin, exit */ - if (pin == 0) - return -ENODEV; - - /* Now we walk up the PCI tree */ - lspec = pin; - for (;;) { - /* Get the pci_dev of our parent */ - ppdev = pdev->bus->self; - - /* Ouch, it's a host bridge... */ - if (ppdev == NULL) { -#ifdef CONFIG_PPC64 - ppnode = pci_bus_to_OF_node(pdev->bus); -#else - struct pci_controller *host; - host = pci_bus_to_host(pdev->bus); - ppnode = host ? host->dn : NULL; -#endif - /* No node for host bridge ? give up */ - if (ppnode == NULL) - return -EINVAL; - } else - /* We found a P2P bridge, check if it has a node */ - ppnode = pci_device_to_OF_node(ppdev); - - /* Ok, we have found a parent with a device-node, hand over to - * the OF parsing code. - * We build a unit address from the linux device to be used for - * resolution. Note that we use the linux bus number which may - * not match your firmware bus numbering. - * Fortunately, in most cases, interrupt-map-mask doesn't include - * the bus number as part of the matching. - * You should still be careful about that though if you intend - * to rely on this function (you ship a firmware that doesn't - * create device nodes for all PCI devices). - */ - if (ppnode) - break; - - /* We can only get here if we hit a P2P bridge with no node, - * let's do standard swizzling and try again - */ - lspec = pci_swizzle_interrupt_pin(pdev, lspec); - pdev = ppdev; - } - - laddr[0] = (pdev->bus->number << 16) - | (pdev->devfn << 8); - laddr[1] = laddr[2] = 0; - return of_irq_map_raw(ppnode, &lspec, 1, laddr, out_irq); -} -EXPORT_SYMBOL_GPL(of_irq_map_pci); -#endif /* CONFIG_PCI */ void of_parse_dma_window(struct device_node *dn, const void *dma_window_prop, unsigned long *busno, unsigned long *phys, unsigned long *size) diff --git a/drivers/of/Kconfig b/drivers/of/Kconfig index 3c6e100..efabbf9 100644 --- a/drivers/of/Kconfig +++ b/drivers/of/Kconfig @@ -69,4 +69,10 @@ config OF_MDIO help OpenFirmware MDIO bus (Ethernet PHY) accessors +config OF_PCI + def_tristate PCI + depends on PCI && (PPC || MICROBLAZE) + help + OpenFirmware PCI bus accessors + endmenu # OF diff --git a/drivers/of/Makefile b/drivers/of/Makefile index 3ab21a0..f7861ed 100644 --- a/drivers/of/Makefile +++ b/drivers/of/Makefile @@ -9,3 +9,4 @@ obj-$(CONFIG_OF_I2C) += of_i2c.o obj-$(CONFIG_OF_NET) += of_net.o obj-$(CONFIG_OF_SPI) += of_spi.o obj-$(CONFIG_OF_MDIO) += of_mdio.o +obj-$(CONFIG_OF_PCI) += of_pci.o diff --git a/drivers/of/of_pci.c b/drivers/of/of_pci.c new file mode 100644 index 0000000..314535f --- /dev/null +++ b/drivers/of/of_pci.c @@ -0,0 +1,91 @@ +#include +#include +#include + +/** + * of_irq_map_pci - Resolve the interrupt for a PCI device + * @pdev: the device whose interrupt is to be resolved + * @out_irq: structure of_irq filled by this function + * + * This function resolves the PCI interrupt for a given PCI device. If a + * device-node exists for a given pci_dev, it will use normal OF tree + * walking. If not, it will implement standard swizzling and walk up the + * PCI tree until an device-node is found, at which point it will finish + * resolving using the OF tree walking. + */ +int of_irq_map_pci(struct pci_dev *pdev, struct of_irq *out_irq) +{ + struct device_node *dn, *ppnode; + struct pci_dev *ppdev; + u32 lspec; + __be32 lspec_be; + __be32 laddr[3]; + u8 pin; + int rc; + + /* Check if we have a device node, if yes, fallback to standard + * device tree parsing + */ + dn = pci_device_to_OF_node(pdev); + if (dn) { + rc = of_irq_map_one(dn, 0, out_irq); + if (!rc) + return rc; + } + + /* Ok, we don't, time to have fun. Let's start by building up an + * interrupt spec. we assume #interrupt-cells is 1, which is standard + * for PCI. If you do different, then don't use that routine. + */ + rc = pci_read_config_byte(pdev, PCI_INTERRUPT_PIN, &pin); + if (rc != 0) + return rc; + /* No pin, exit */ + if (pin == 0) + return -ENODEV; + + /* Now we walk up the PCI tree */ + lspec = pin; + for (;;) { + /* Get the pci_dev of our parent */ + ppdev = pdev->bus->self; + + /* Ouch, it's a host bridge... */ + if (ppdev == NULL) { + ppnode = pci_bus_to_OF_node(pdev->bus); + + /* No node for host bridge ? give up */ + if (ppnode == NULL) + return -EINVAL; + } else { + /* We found a P2P bridge, check if it has a node */ + ppnode = pci_device_to_OF_node(ppdev); + } + + /* Ok, we have found a parent with a device-node, hand over to + * the OF parsing code. + * We build a unit address from the linux device to be used for + * resolution. Note that we use the linux bus number which may + * not match your firmware bus numbering. + * Fortunately, in most cases, interrupt-map-mask doesn't + * include the bus number as part of the matching. + * You should still be careful about that though if you intend + * to rely on this function (you ship a firmware that doesn't + * create device nodes for all PCI devices). + */ + if (ppnode) + break; + + /* We can only get here if we hit a P2P bridge with no node, + * let's do standard swizzling and try again + */ + lspec = pci_swizzle_interrupt_pin(pdev, lspec); + pdev = ppdev; + } + + lspec_be = cpu_to_be32(lspec); + laddr[0] = cpu_to_be32((pdev->bus->number << 16) | (pdev->devfn << 8)); + laddr[1] = laddr[2] = cpu_to_be32(0); + return of_irq_map_raw(ppnode, &lspec_be, 1, laddr, out_irq); +} +EXPORT_SYMBOL_GPL(of_irq_map_pci); diff --git a/include/linux/of_pci.h b/include/linux/of_pci.h new file mode 100644 index 0000000..85a27b6 --- /dev/null +++ b/include/linux/of_pci.h @@ -0,0 +1,9 @@ +#ifndef __OF_PCI_H +#define __OF_PCI_H + +#include + +struct pci_dev; +struct of_irq; +int of_irq_map_pci(struct pci_dev *pdev, struct of_irq *out_irq); +#endif -- cgit v0.10.2