From 45361a4fe4464180815157654aabbd2afb4848ad Mon Sep 17 00:00:00 2001 From: Thomas Petazzoni Date: Thu, 16 May 2013 17:55:22 +0200 Subject: pci: PCIe driver for Marvell Armada 370/XP systems This driver implements the support for the PCIe interfaces on the Marvell Armada 370/XP ARM SoCs. In the future, it might be extended to cover earlier families of Marvell SoCs, such as Dove, Orion and Kirkwood. The driver implements the hw_pci operations needed by the core ARM PCI code to setup PCI devices and get their corresponding IRQs, and the pci_ops operations that are used by the PCI core to read/write the configuration space of PCI devices. Since the PCIe interfaces of Marvell SoCs are completely separate and not linked together in a bus, this driver sets up an emulated PCI host bridge, with one PCI-to-PCI bridge as child for each hardware PCIe interface. In addition, this driver enumerates the different PCIe slots, and for those having a device plugged in, it sets up the necessary address decoding windows, using the mvebu-mbus driver. Signed-off-by: Thomas Petazzoni Acked-by: Bjorn Helgaas Signed-off-by: Jason Cooper diff --git a/Documentation/devicetree/bindings/pci/mvebu-pci.txt b/Documentation/devicetree/bindings/pci/mvebu-pci.txt new file mode 100644 index 0000000..eb69d92 --- /dev/null +++ b/Documentation/devicetree/bindings/pci/mvebu-pci.txt @@ -0,0 +1,220 @@ +* Marvell EBU PCIe interfaces + +Mandatory properties: +- compatible: one of the following values: + marvell,armada-370-pcie + marvell,armada-xp-pcie +- #address-cells, set to <3> +- #size-cells, set to <2> +- #interrupt-cells, set to <1> +- bus-range: PCI bus numbers covered +- device_type, set to "pci" +- ranges: ranges for the PCI memory and I/O regions, as well as the + MMIO registers to control the PCIe interfaces. + +In addition, the Device Tree node must have sub-nodes describing each +PCIe interface, having the following mandatory properties: +- reg: used only for interrupt mapping, so only the first four bytes + are used to refer to the correct bus number and device number. +- assigned-addresses: reference to the MMIO registers used to control + this PCIe interface. +- clocks: the clock associated to this PCIe interface +- marvell,pcie-port: the physical PCIe port number +- status: either "disabled" or "okay" +- device_type, set to "pci" +- #address-cells, set to <3> +- #size-cells, set to <2> +- #interrupt-cells, set to <1> +- ranges, empty property. +- interrupt-map-mask and interrupt-map, standard PCI properties to + define the mapping of the PCIe interface to interrupt numbers. + +and the following optional properties: +- marvell,pcie-lane: the physical PCIe lane number, for ports having + multiple lanes. If this property is not found, we assume that the + value is 0. + +Example: + +pcie-controller { + compatible = "marvell,armada-xp-pcie"; + status = "disabled"; + device_type = "pci"; + + #address-cells = <3>; + #size-cells = <2>; + + bus-range = <0x00 0xff>; + + ranges = <0x82000000 0 0xd0040000 0xd0040000 0 0x00002000 /* Port 0.0 registers */ + 0x82000000 0 0xd0042000 0xd0042000 0 0x00002000 /* Port 2.0 registers */ + 0x82000000 0 0xd0044000 0xd0044000 0 0x00002000 /* Port 0.1 registers */ + 0x82000000 0 0xd0048000 0xd0048000 0 0x00002000 /* Port 0.2 registers */ + 0x82000000 0 0xd004c000 0xd004c000 0 0x00002000 /* Port 0.3 registers */ + 0x82000000 0 0xd0080000 0xd0080000 0 0x00002000 /* Port 1.0 registers */ + 0x82000000 0 0xd0082000 0xd0082000 0 0x00002000 /* Port 3.0 registers */ + 0x82000000 0 0xd0084000 0xd0084000 0 0x00002000 /* Port 1.1 registers */ + 0x82000000 0 0xd0088000 0xd0088000 0 0x00002000 /* Port 1.2 registers */ + 0x82000000 0 0xd008c000 0xd008c000 0 0x00002000 /* Port 1.3 registers */ + 0x82000000 0 0xe0000000 0xe0000000 0 0x08000000 /* non-prefetchable memory */ + 0x81000000 0 0 0xe8000000 0 0x00100000>; /* downstream I/O */ + + pcie@1,0 { + device_type = "pci"; + assigned-addresses = <0x82000800 0 0xd0040000 0 0x2000>; + reg = <0x0800 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &mpic 58>; + marvell,pcie-port = <0>; + marvell,pcie-lane = <0>; + clocks = <&gateclk 5>; + status = "disabled"; + }; + + pcie@2,0 { + device_type = "pci"; + assigned-addresses = <0x82001000 0 0xd0044000 0 0x2000>; + reg = <0x1000 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &mpic 59>; + marvell,pcie-port = <0>; + marvell,pcie-lane = <1>; + clocks = <&gateclk 6>; + status = "disabled"; + }; + + pcie@3,0 { + device_type = "pci"; + assigned-addresses = <0x82001800 0 0xd0048000 0 0x2000>; + reg = <0x1800 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &mpic 60>; + marvell,pcie-port = <0>; + marvell,pcie-lane = <2>; + clocks = <&gateclk 7>; + status = "disabled"; + }; + + pcie@4,0 { + device_type = "pci"; + assigned-addresses = <0x82002000 0 0xd004c000 0 0x2000>; + reg = <0x2000 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &mpic 61>; + marvell,pcie-port = <0>; + marvell,pcie-lane = <3>; + clocks = <&gateclk 8>; + status = "disabled"; + }; + + pcie@5,0 { + device_type = "pci"; + assigned-addresses = <0x82002800 0 0xd0080000 0 0x2000>; + reg = <0x2800 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &mpic 62>; + marvell,pcie-port = <1>; + marvell,pcie-lane = <0>; + clocks = <&gateclk 9>; + status = "disabled"; + }; + + pcie@6,0 { + device_type = "pci"; + assigned-addresses = <0x82003000 0 0xd0084000 0 0x2000>; + reg = <0x3000 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &mpic 63>; + marvell,pcie-port = <1>; + marvell,pcie-lane = <1>; + clocks = <&gateclk 10>; + status = "disabled"; + }; + + pcie@7,0 { + device_type = "pci"; + assigned-addresses = <0x82003800 0 0xd0088000 0 0x2000>; + reg = <0x3800 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &mpic 64>; + marvell,pcie-port = <1>; + marvell,pcie-lane = <2>; + clocks = <&gateclk 11>; + status = "disabled"; + }; + + pcie@8,0 { + device_type = "pci"; + assigned-addresses = <0x82004000 0 0xd008c000 0 0x2000>; + reg = <0x4000 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &mpic 65>; + marvell,pcie-port = <1>; + marvell,pcie-lane = <3>; + clocks = <&gateclk 12>; + status = "disabled"; + }; + pcie@9,0 { + device_type = "pci"; + assigned-addresses = <0x82004800 0 0xd0042000 0 0x2000>; + reg = <0x4800 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &mpic 99>; + marvell,pcie-port = <2>; + marvell,pcie-lane = <0>; + clocks = <&gateclk 26>; + status = "disabled"; + }; + + pcie@10,0 { + device_type = "pci"; + assigned-addresses = <0x82005000 0 0xd0082000 0 0x2000>; + reg = <0x5000 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &mpic 103>; + marvell,pcie-port = <3>; + marvell,pcie-lane = <0>; + clocks = <&gateclk 27>; + status = "disabled"; + }; +}; diff --git a/drivers/pci/Kconfig b/drivers/pci/Kconfig index 6d51aa6..ac45398 100644 --- a/drivers/pci/Kconfig +++ b/drivers/pci/Kconfig @@ -119,3 +119,5 @@ config PCI_IOAPIC config PCI_LABEL def_bool y if (DMI || ACPI) select NLS + +source "drivers/pci/host/Kconfig" diff --git a/drivers/pci/Makefile b/drivers/pci/Makefile index 0c3efcf..6ebf5bf 100644 --- a/drivers/pci/Makefile +++ b/drivers/pci/Makefile @@ -67,3 +67,6 @@ obj-$(CONFIG_XEN_PCIDEV_FRONTEND) += xen-pcifront.o obj-$(CONFIG_OF) += of.o ccflags-$(CONFIG_PCI_DEBUG) := -DDEBUG + +# PCI host controller drivers +obj-y += host/ diff --git a/drivers/pci/host/Kconfig b/drivers/pci/host/Kconfig new file mode 100644 index 0000000..6918fbc --- /dev/null +++ b/drivers/pci/host/Kconfig @@ -0,0 +1,8 @@ +menu "PCI host controller drivers" + depends on PCI + +config PCI_MVEBU + bool "Marvell EBU PCIe controller" + depends on ARCH_MVEBU + +endmenu diff --git a/drivers/pci/host/Makefile b/drivers/pci/host/Makefile new file mode 100644 index 0000000..5ea2d8b --- /dev/null +++ b/drivers/pci/host/Makefile @@ -0,0 +1 @@ +obj-$(CONFIG_PCI_MVEBU) += pci-mvebu.o diff --git a/drivers/pci/host/pci-mvebu.c b/drivers/pci/host/pci-mvebu.c new file mode 100644 index 0000000..ad1c46b --- /dev/null +++ b/drivers/pci/host/pci-mvebu.c @@ -0,0 +1,880 @@ +/* + * PCIe driver for Marvell Armada 370 and Armada XP SoCs + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* + * PCIe unit register offsets. + */ +#define PCIE_DEV_ID_OFF 0x0000 +#define PCIE_CMD_OFF 0x0004 +#define PCIE_DEV_REV_OFF 0x0008 +#define PCIE_BAR_LO_OFF(n) (0x0010 + ((n) << 3)) +#define PCIE_BAR_HI_OFF(n) (0x0014 + ((n) << 3)) +#define PCIE_HEADER_LOG_4_OFF 0x0128 +#define PCIE_BAR_CTRL_OFF(n) (0x1804 + (((n) - 1) * 4)) +#define PCIE_WIN04_CTRL_OFF(n) (0x1820 + ((n) << 4)) +#define PCIE_WIN04_BASE_OFF(n) (0x1824 + ((n) << 4)) +#define PCIE_WIN04_REMAP_OFF(n) (0x182c + ((n) << 4)) +#define PCIE_WIN5_CTRL_OFF 0x1880 +#define PCIE_WIN5_BASE_OFF 0x1884 +#define PCIE_WIN5_REMAP_OFF 0x188c +#define PCIE_CONF_ADDR_OFF 0x18f8 +#define PCIE_CONF_ADDR_EN 0x80000000 +#define PCIE_CONF_REG(r) ((((r) & 0xf00) << 16) | ((r) & 0xfc)) +#define PCIE_CONF_BUS(b) (((b) & 0xff) << 16) +#define PCIE_CONF_DEV(d) (((d) & 0x1f) << 11) +#define PCIE_CONF_FUNC(f) (((f) & 0x7) << 8) +#define PCIE_CONF_ADDR(bus, devfn, where) \ + (PCIE_CONF_BUS(bus) | PCIE_CONF_DEV(PCI_SLOT(devfn)) | \ + PCIE_CONF_FUNC(PCI_FUNC(devfn)) | PCIE_CONF_REG(where) | \ + PCIE_CONF_ADDR_EN) +#define PCIE_CONF_DATA_OFF 0x18fc +#define PCIE_MASK_OFF 0x1910 +#define PCIE_MASK_ENABLE_INTS 0x0f000000 +#define PCIE_CTRL_OFF 0x1a00 +#define PCIE_CTRL_X1_MODE 0x0001 +#define PCIE_STAT_OFF 0x1a04 +#define PCIE_STAT_BUS 0xff00 +#define PCIE_STAT_LINK_DOWN BIT(0) +#define PCIE_DEBUG_CTRL 0x1a60 +#define PCIE_DEBUG_SOFT_RESET BIT(20) + +/* + * This product ID is registered by Marvell, and used when the Marvell + * SoC is not the root complex, but an endpoint on the PCIe bus. It is + * therefore safe to re-use this PCI ID for our emulated PCI-to-PCI + * bridge. + */ +#define MARVELL_EMULATED_PCI_PCI_BRIDGE_ID 0x7846 + +/* PCI configuration space of a PCI-to-PCI bridge */ +struct mvebu_sw_pci_bridge { + u16 vendor; + u16 device; + u16 command; + u16 status; + u16 class; + u8 interface; + u8 revision; + u8 bist; + u8 header_type; + u8 latency_timer; + u8 cache_line_size; + u32 bar[2]; + u8 primary_bus; + u8 secondary_bus; + u8 subordinate_bus; + u8 secondary_latency_timer; + u8 iobase; + u8 iolimit; + u16 secondary_status; + u16 membase; + u16 memlimit; + u16 prefmembase; + u16 prefmemlimit; + u32 prefbaseupper; + u32 preflimitupper; + u16 iobaseupper; + u16 iolimitupper; + u8 cappointer; + u8 reserved1; + u16 reserved2; + u32 romaddr; + u8 intline; + u8 intpin; + u16 bridgectrl; +}; + +struct mvebu_pcie_port; + +/* Structure representing all PCIe interfaces */ +struct mvebu_pcie { + struct platform_device *pdev; + struct mvebu_pcie_port *ports; + struct resource io; + struct resource realio; + struct resource mem; + struct resource busn; + int nports; +}; + +/* Structure representing one PCIe interface */ +struct mvebu_pcie_port { + char *name; + void __iomem *base; + spinlock_t conf_lock; + int haslink; + u32 port; + u32 lane; + int devfn; + struct clk *clk; + struct mvebu_sw_pci_bridge bridge; + struct device_node *dn; + struct mvebu_pcie *pcie; + phys_addr_t memwin_base; + size_t memwin_size; + phys_addr_t iowin_base; + size_t iowin_size; +}; + +static bool mvebu_pcie_link_up(struct mvebu_pcie_port *port) +{ + return !(readl(port->base + PCIE_STAT_OFF) & PCIE_STAT_LINK_DOWN); +} + +static void mvebu_pcie_set_local_bus_nr(struct mvebu_pcie_port *port, int nr) +{ + u32 stat; + + stat = readl(port->base + PCIE_STAT_OFF); + stat &= ~PCIE_STAT_BUS; + stat |= nr << 8; + writel(stat, port->base + PCIE_STAT_OFF); +} + +/* + * Setup PCIE BARs and Address Decode Wins: + * BAR[0,2] -> disabled, BAR[1] -> covers all DRAM banks + * WIN[0-3] -> DRAM bank[0-3] + */ +static void __init mvebu_pcie_setup_wins(struct mvebu_pcie_port *port) +{ + const struct mbus_dram_target_info *dram; + u32 size; + int i; + + dram = mv_mbus_dram_info(); + + /* First, disable and clear BARs and windows. */ + for (i = 1; i < 3; i++) { + writel(0, port->base + PCIE_BAR_CTRL_OFF(i)); + writel(0, port->base + PCIE_BAR_LO_OFF(i)); + writel(0, port->base + PCIE_BAR_HI_OFF(i)); + } + + for (i = 0; i < 5; i++) { + writel(0, port->base + PCIE_WIN04_CTRL_OFF(i)); + writel(0, port->base + PCIE_WIN04_BASE_OFF(i)); + writel(0, port->base + PCIE_WIN04_REMAP_OFF(i)); + } + + writel(0, port->base + PCIE_WIN5_CTRL_OFF); + writel(0, port->base + PCIE_WIN5_BASE_OFF); + writel(0, port->base + PCIE_WIN5_REMAP_OFF); + + /* Setup windows for DDR banks. Count total DDR size on the fly. */ + size = 0; + for (i = 0; i < dram->num_cs; i++) { + const struct mbus_dram_window *cs = dram->cs + i; + + writel(cs->base & 0xffff0000, + port->base + PCIE_WIN04_BASE_OFF(i)); + writel(0, port->base + PCIE_WIN04_REMAP_OFF(i)); + writel(((cs->size - 1) & 0xffff0000) | + (cs->mbus_attr << 8) | + (dram->mbus_dram_target_id << 4) | 1, + port->base + PCIE_WIN04_CTRL_OFF(i)); + + size += cs->size; + } + + /* Round up 'size' to the nearest power of two. */ + if ((size & (size - 1)) != 0) + size = 1 << fls(size); + + /* Setup BAR[1] to all DRAM banks. */ + writel(dram->cs[0].base, port->base + PCIE_BAR_LO_OFF(1)); + writel(0, port->base + PCIE_BAR_HI_OFF(1)); + writel(((size - 1) & 0xffff0000) | 1, + port->base + PCIE_BAR_CTRL_OFF(1)); +} + +static void __init mvebu_pcie_setup_hw(struct mvebu_pcie_port *port) +{ + u16 cmd; + u32 mask; + + /* Point PCIe unit MBUS decode windows to DRAM space. */ + mvebu_pcie_setup_wins(port); + + /* Master + slave enable. */ + cmd = readw(port->base + PCIE_CMD_OFF); + cmd |= PCI_COMMAND_IO; + cmd |= PCI_COMMAND_MEMORY; + cmd |= PCI_COMMAND_MASTER; + writew(cmd, port->base + PCIE_CMD_OFF); + + /* Enable interrupt lines A-D. */ + mask = readl(port->base + PCIE_MASK_OFF); + mask |= PCIE_MASK_ENABLE_INTS; + writel(mask, port->base + PCIE_MASK_OFF); +} + +static int mvebu_pcie_hw_rd_conf(struct mvebu_pcie_port *port, + struct pci_bus *bus, + u32 devfn, int where, int size, u32 *val) +{ + writel(PCIE_CONF_ADDR(bus->number, devfn, where), + port->base + PCIE_CONF_ADDR_OFF); + + *val = readl(port->base + PCIE_CONF_DATA_OFF); + + if (size == 1) + *val = (*val >> (8 * (where & 3))) & 0xff; + else if (size == 2) + *val = (*val >> (8 * (where & 3))) & 0xffff; + + return PCIBIOS_SUCCESSFUL; +} + +static int mvebu_pcie_hw_wr_conf(struct mvebu_pcie_port *port, + struct pci_bus *bus, + u32 devfn, int where, int size, u32 val) +{ + int ret = PCIBIOS_SUCCESSFUL; + + writel(PCIE_CONF_ADDR(bus->number, devfn, where), + port->base + PCIE_CONF_ADDR_OFF); + + if (size == 4) + writel(val, port->base + PCIE_CONF_DATA_OFF); + else if (size == 2) + writew(val, port->base + PCIE_CONF_DATA_OFF + (where & 3)); + else if (size == 1) + writeb(val, port->base + PCIE_CONF_DATA_OFF + (where & 3)); + else + ret = PCIBIOS_BAD_REGISTER_NUMBER; + + return ret; +} + +static void mvebu_pcie_handle_iobase_change(struct mvebu_pcie_port *port) +{ + phys_addr_t iobase; + + /* Are the new iobase/iolimit values invalid? */ + if (port->bridge.iolimit < port->bridge.iobase || + port->bridge.iolimitupper < port->bridge.iobaseupper) { + + /* If a window was configured, remove it */ + if (port->iowin_base) { + mvebu_mbus_del_window(port->iowin_base, + port->iowin_size); + port->iowin_base = 0; + port->iowin_size = 0; + } + + return; + } + + /* + * We read the PCI-to-PCI bridge emulated registers, and + * calculate the base address and size of the address decoding + * window to setup, according to the PCI-to-PCI bridge + * specifications. iobase is the bus address, port->iowin_base + * is the CPU address. + */ + iobase = ((port->bridge.iobase & 0xF0) << 8) | + (port->bridge.iobaseupper << 16); + port->iowin_base = port->pcie->io.start + iobase; + port->iowin_size = ((0xFFF | ((port->bridge.iolimit & 0xF0) << 8) | + (port->bridge.iolimitupper << 16)) - + iobase); + + mvebu_mbus_add_window_remap_flags(port->name, port->iowin_base, + port->iowin_size, + iobase, + MVEBU_MBUS_PCI_IO); + + pci_ioremap_io(iobase, port->iowin_base); +} + +static void mvebu_pcie_handle_membase_change(struct mvebu_pcie_port *port) +{ + /* Are the new membase/memlimit values invalid? */ + if (port->bridge.memlimit < port->bridge.membase) { + + /* If a window was configured, remove it */ + if (port->memwin_base) { + mvebu_mbus_del_window(port->memwin_base, + port->memwin_size); + port->memwin_base = 0; + port->memwin_size = 0; + } + + return; + } + + /* + * We read the PCI-to-PCI bridge emulated registers, and + * calculate the base address and size of the address decoding + * window to setup, according to the PCI-to-PCI bridge + * specifications. + */ + port->memwin_base = ((port->bridge.membase & 0xFFF0) << 16); + port->memwin_size = + (((port->bridge.memlimit & 0xFFF0) << 16) | 0xFFFFF) - + port->memwin_base; + + mvebu_mbus_add_window_remap_flags(port->name, port->memwin_base, + port->memwin_size, + MVEBU_MBUS_NO_REMAP, + MVEBU_MBUS_PCI_MEM); +} + +/* + * Initialize the configuration space of the PCI-to-PCI bridge + * associated with the given PCIe interface. + */ +static void mvebu_sw_pci_bridge_init(struct mvebu_pcie_port *port) +{ + struct mvebu_sw_pci_bridge *bridge = &port->bridge; + + memset(bridge, 0, sizeof(struct mvebu_sw_pci_bridge)); + + bridge->status = PCI_STATUS_CAP_LIST; + bridge->class = PCI_CLASS_BRIDGE_PCI; + bridge->vendor = PCI_VENDOR_ID_MARVELL; + bridge->device = MARVELL_EMULATED_PCI_PCI_BRIDGE_ID; + bridge->header_type = PCI_HEADER_TYPE_BRIDGE; + bridge->cache_line_size = 0x10; + + /* We support 32 bits I/O addressing */ + bridge->iobase = PCI_IO_RANGE_TYPE_32; + bridge->iolimit = PCI_IO_RANGE_TYPE_32; +} + +/* + * Read the configuration space of the PCI-to-PCI bridge associated to + * the given PCIe interface. + */ +static int mvebu_sw_pci_bridge_read(struct mvebu_pcie_port *port, + unsigned int where, int size, u32 *value) +{ + struct mvebu_sw_pci_bridge *bridge = &port->bridge; + + switch (where & ~3) { + case PCI_VENDOR_ID: + *value = bridge->device << 16 | bridge->vendor; + break; + + case PCI_COMMAND: + *value = bridge->status << 16 | bridge->command; + break; + + case PCI_CLASS_REVISION: + *value = bridge->class << 16 | bridge->interface << 8 | + bridge->revision; + break; + + case PCI_CACHE_LINE_SIZE: + *value = bridge->bist << 24 | bridge->header_type << 16 | + bridge->latency_timer << 8 | bridge->cache_line_size; + break; + + case PCI_BASE_ADDRESS_0 ... PCI_BASE_ADDRESS_1: + *value = bridge->bar[((where & ~3) - PCI_BASE_ADDRESS_0) / 4]; + break; + + case PCI_PRIMARY_BUS: + *value = (bridge->secondary_latency_timer << 24 | + bridge->subordinate_bus << 16 | + bridge->secondary_bus << 8 | + bridge->primary_bus); + break; + + case PCI_IO_BASE: + *value = (bridge->secondary_status << 16 | + bridge->iolimit << 8 | + bridge->iobase); + break; + + case PCI_MEMORY_BASE: + *value = (bridge->memlimit << 16 | bridge->membase); + break; + + case PCI_PREF_MEMORY_BASE: + *value = (bridge->prefmemlimit << 16 | bridge->prefmembase); + break; + + case PCI_PREF_BASE_UPPER32: + *value = bridge->prefbaseupper; + break; + + case PCI_PREF_LIMIT_UPPER32: + *value = bridge->preflimitupper; + break; + + case PCI_IO_BASE_UPPER16: + *value = (bridge->iolimitupper << 16 | bridge->iobaseupper); + break; + + case PCI_ROM_ADDRESS1: + *value = 0; + break; + + default: + *value = 0xffffffff; + return PCIBIOS_BAD_REGISTER_NUMBER; + } + + if (size == 2) + *value = (*value >> (8 * (where & 3))) & 0xffff; + else if (size == 1) + *value = (*value >> (8 * (where & 3))) & 0xff; + + return PCIBIOS_SUCCESSFUL; +} + +/* Write to the PCI-to-PCI bridge configuration space */ +static int mvebu_sw_pci_bridge_write(struct mvebu_pcie_port *port, + unsigned int where, int size, u32 value) +{ + struct mvebu_sw_pci_bridge *bridge = &port->bridge; + u32 mask, reg; + int err; + + if (size == 4) + mask = 0x0; + else if (size == 2) + mask = ~(0xffff << ((where & 3) * 8)); + else if (size == 1) + mask = ~(0xff << ((where & 3) * 8)); + else + return PCIBIOS_BAD_REGISTER_NUMBER; + + err = mvebu_sw_pci_bridge_read(port, where & ~3, 4, ®); + if (err) + return err; + + value = (reg & mask) | value << ((where & 3) * 8); + + switch (where & ~3) { + case PCI_COMMAND: + bridge->command = value & 0xffff; + bridge->status = value >> 16; + break; + + case PCI_BASE_ADDRESS_0 ... PCI_BASE_ADDRESS_1: + bridge->bar[((where & ~3) - PCI_BASE_ADDRESS_0) / 4] = value; + break; + + case PCI_IO_BASE: + /* + * We also keep bit 1 set, it is a read-only bit that + * indicates we support 32 bits addressing for the + * I/O + */ + bridge->iobase = (value & 0xff) | PCI_IO_RANGE_TYPE_32; + bridge->iolimit = ((value >> 8) & 0xff) | PCI_IO_RANGE_TYPE_32; + bridge->secondary_status = value >> 16; + mvebu_pcie_handle_iobase_change(port); + break; + + case PCI_MEMORY_BASE: + bridge->membase = value & 0xffff; + bridge->memlimit = value >> 16; + mvebu_pcie_handle_membase_change(port); + break; + + case PCI_PREF_MEMORY_BASE: + bridge->prefmembase = value & 0xffff; + bridge->prefmemlimit = value >> 16; + break; + + case PCI_PREF_BASE_UPPER32: + bridge->prefbaseupper = value; + break; + + case PCI_PREF_LIMIT_UPPER32: + bridge->preflimitupper = value; + break; + + case PCI_IO_BASE_UPPER16: + bridge->iobaseupper = value & 0xffff; + bridge->iolimitupper = value >> 16; + mvebu_pcie_handle_iobase_change(port); + break; + + case PCI_PRIMARY_BUS: + bridge->primary_bus = value & 0xff; + bridge->secondary_bus = (value >> 8) & 0xff; + bridge->subordinate_bus = (value >> 16) & 0xff; + bridge->secondary_latency_timer = (value >> 24) & 0xff; + mvebu_pcie_set_local_bus_nr(port, bridge->secondary_bus); + break; + + default: + break; + } + + return PCIBIOS_SUCCESSFUL; +} + +static inline struct mvebu_pcie *sys_to_pcie(struct pci_sys_data *sys) +{ + return sys->private_data; +} + +static struct mvebu_pcie_port * +mvebu_pcie_find_port(struct mvebu_pcie *pcie, struct pci_bus *bus, + int devfn) +{ + int i; + + for (i = 0; i < pcie->nports; i++) { + struct mvebu_pcie_port *port = &pcie->ports[i]; + if (bus->number == 0 && port->devfn == devfn) + return port; + if (bus->number != 0 && + port->bridge.secondary_bus == bus->number) + return port; + } + + return NULL; +} + +/* PCI configuration space write function */ +static int mvebu_pcie_wr_conf(struct pci_bus *bus, u32 devfn, + int where, int size, u32 val) +{ + struct mvebu_pcie *pcie = sys_to_pcie(bus->sysdata); + struct mvebu_pcie_port *port; + unsigned long flags; + int ret; + + port = mvebu_pcie_find_port(pcie, bus, devfn); + if (!port) + return PCIBIOS_DEVICE_NOT_FOUND; + + /* Access the emulated PCI-to-PCI bridge */ + if (bus->number == 0) + return mvebu_sw_pci_bridge_write(port, where, size, val); + + if (!port->haslink || PCI_SLOT(devfn) != 0) + return PCIBIOS_DEVICE_NOT_FOUND; + + /* Access the real PCIe interface */ + spin_lock_irqsave(&port->conf_lock, flags); + ret = mvebu_pcie_hw_wr_conf(port, bus, + PCI_DEVFN(1, PCI_FUNC(devfn)), + where, size, val); + spin_unlock_irqrestore(&port->conf_lock, flags); + + return ret; +} + +/* PCI configuration space read function */ +static int mvebu_pcie_rd_conf(struct pci_bus *bus, u32 devfn, int where, + int size, u32 *val) +{ + struct mvebu_pcie *pcie = sys_to_pcie(bus->sysdata); + struct mvebu_pcie_port *port; + unsigned long flags; + int ret; + + port = mvebu_pcie_find_port(pcie, bus, devfn); + if (!port) { + *val = 0xffffffff; + return PCIBIOS_DEVICE_NOT_FOUND; + } + + /* Access the emulated PCI-to-PCI bridge */ + if (bus->number == 0) + return mvebu_sw_pci_bridge_read(port, where, size, val); + + if (!port->haslink || PCI_SLOT(devfn) != 0) { + *val = 0xffffffff; + return PCIBIOS_DEVICE_NOT_FOUND; + } + + /* Access the real PCIe interface */ + spin_lock_irqsave(&port->conf_lock, flags); + ret = mvebu_pcie_hw_rd_conf(port, bus, + PCI_DEVFN(1, PCI_FUNC(devfn)), + where, size, val); + spin_unlock_irqrestore(&port->conf_lock, flags); + + return ret; +} + +static struct pci_ops mvebu_pcie_ops = { + .read = mvebu_pcie_rd_conf, + .write = mvebu_pcie_wr_conf, +}; + +static int __init mvebu_pcie_setup(int nr, struct pci_sys_data *sys) +{ + struct mvebu_pcie *pcie = sys_to_pcie(sys); + int i; + + pci_add_resource_offset(&sys->resources, &pcie->realio, sys->io_offset); + pci_add_resource_offset(&sys->resources, &pcie->mem, sys->mem_offset); + pci_add_resource(&sys->resources, &pcie->busn); + + for (i = 0; i < pcie->nports; i++) { + struct mvebu_pcie_port *port = &pcie->ports[i]; + mvebu_pcie_setup_hw(port); + } + + return 1; +} + +static int __init mvebu_pcie_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) +{ + struct of_irq oirq; + int ret; + + ret = of_irq_map_pci(dev, &oirq); + if (ret) + return ret; + + return irq_create_of_mapping(oirq.controller, oirq.specifier, + oirq.size); +} + +static struct pci_bus *mvebu_pcie_scan_bus(int nr, struct pci_sys_data *sys) +{ + struct mvebu_pcie *pcie = sys_to_pcie(sys); + struct pci_bus *bus; + + bus = pci_create_root_bus(&pcie->pdev->dev, sys->busnr, + &mvebu_pcie_ops, sys, &sys->resources); + if (!bus) + return NULL; + + pci_scan_child_bus(bus); + + return bus; +} + +resource_size_t mvebu_pcie_align_resource(struct pci_dev *dev, + const struct resource *res, + resource_size_t start, + resource_size_t size, + resource_size_t align) +{ + if (dev->bus->number != 0) + return start; + + /* + * On the PCI-to-PCI bridge side, the I/O windows must have at + * least a 64 KB size and be aligned on their size, and the + * memory windows must have at least a 1 MB size and be + * aligned on their size + */ + if (res->flags & IORESOURCE_IO) + return round_up(start, max((resource_size_t)SZ_64K, size)); + else if (res->flags & IORESOURCE_MEM) + return round_up(start, max((resource_size_t)SZ_1M, size)); + else + return start; +} + +static void __init mvebu_pcie_enable(struct mvebu_pcie *pcie) +{ + struct hw_pci hw; + + memset(&hw, 0, sizeof(hw)); + + hw.nr_controllers = 1; + hw.private_data = (void **)&pcie; + hw.setup = mvebu_pcie_setup; + hw.scan = mvebu_pcie_scan_bus; + hw.map_irq = mvebu_pcie_map_irq; + hw.ops = &mvebu_pcie_ops; + hw.align_resource = mvebu_pcie_align_resource; + + pci_common_init(&hw); +} + +/* + * Looks up the list of register addresses encoded into the reg = + * <...> property for one that matches the given port/lane. Once + * found, maps it. + */ +static void __iomem * __init +mvebu_pcie_map_registers(struct platform_device *pdev, + struct device_node *np, + struct mvebu_pcie_port *port) +{ + struct resource regs; + int ret = 0; + + ret = of_address_to_resource(np, 0, ®s); + if (ret) + return NULL; + + return devm_request_and_ioremap(&pdev->dev, ®s); +} + +static int __init mvebu_pcie_probe(struct platform_device *pdev) +{ + struct mvebu_pcie *pcie; + struct device_node *np = pdev->dev.of_node; + struct of_pci_range range; + struct of_pci_range_parser parser; + struct device_node *child; + int i, ret; + + pcie = devm_kzalloc(&pdev->dev, sizeof(struct mvebu_pcie), + GFP_KERNEL); + if (!pcie) + return -ENOMEM; + + pcie->pdev = pdev; + + if (of_pci_range_parser_init(&parser, np)) + return -EINVAL; + + /* Get the I/O and memory ranges from DT */ + for_each_of_pci_range(&parser, &range) { + unsigned long restype = range.flags & IORESOURCE_TYPE_BITS; + if (restype == IORESOURCE_IO) { + of_pci_range_to_resource(&range, np, &pcie->io); + of_pci_range_to_resource(&range, np, &pcie->realio); + pcie->io.name = "I/O"; + pcie->realio.start = max_t(resource_size_t, + PCIBIOS_MIN_IO, + range.pci_addr); + pcie->realio.end = min_t(resource_size_t, + IO_SPACE_LIMIT, + range.pci_addr + range.size); + } + if (restype == IORESOURCE_MEM) { + of_pci_range_to_resource(&range, np, &pcie->mem); + pcie->mem.name = "MEM"; + } + } + + /* Get the bus range */ + ret = of_pci_parse_bus_range(np, &pcie->busn); + if (ret) { + dev_err(&pdev->dev, "failed to parse bus-range property: %d\n", + ret); + return ret; + } + + for_each_child_of_node(pdev->dev.of_node, child) { + if (!of_device_is_available(child)) + continue; + pcie->nports++; + } + + pcie->ports = devm_kzalloc(&pdev->dev, pcie->nports * + sizeof(struct mvebu_pcie_port), + GFP_KERNEL); + if (!pcie->ports) + return -ENOMEM; + + i = 0; + for_each_child_of_node(pdev->dev.of_node, child) { + struct mvebu_pcie_port *port = &pcie->ports[i]; + + if (!of_device_is_available(child)) + continue; + + port->pcie = pcie; + + if (of_property_read_u32(child, "marvell,pcie-port", + &port->port)) { + dev_warn(&pdev->dev, + "ignoring PCIe DT node, missing pcie-port property\n"); + continue; + } + + if (of_property_read_u32(child, "marvell,pcie-lane", + &port->lane)) + port->lane = 0; + + port->name = kasprintf(GFP_KERNEL, "pcie%d.%d", + port->port, port->lane); + + port->devfn = of_pci_get_devfn(child); + if (port->devfn < 0) + continue; + + port->base = mvebu_pcie_map_registers(pdev, child, port); + if (!port->base) { + dev_err(&pdev->dev, "PCIe%d.%d: cannot map registers\n", + port->port, port->lane); + continue; + } + + if (mvebu_pcie_link_up(port)) { + port->haslink = 1; + dev_info(&pdev->dev, "PCIe%d.%d: link up\n", + port->port, port->lane); + } else { + port->haslink = 0; + dev_info(&pdev->dev, "PCIe%d.%d: link down\n", + port->port, port->lane); + } + + port->clk = of_clk_get_by_name(child, NULL); + if (!port->clk) { + dev_err(&pdev->dev, "PCIe%d.%d: cannot get clock\n", + port->port, port->lane); + iounmap(port->base); + port->haslink = 0; + continue; + } + + port->dn = child; + + clk_prepare_enable(port->clk); + spin_lock_init(&port->conf_lock); + + mvebu_sw_pci_bridge_init(port); + + i++; + } + + mvebu_pcie_enable(pcie); + + return 0; +} + +static const struct of_device_id mvebu_pcie_of_match_table[] = { + { .compatible = "marvell,armada-xp-pcie", }, + { .compatible = "marvell,armada-370-pcie", }, + {}, +}; +MODULE_DEVICE_TABLE(of, mvebu_pcie_of_match_table); + +static struct platform_driver mvebu_pcie_driver = { + .driver = { + .owner = THIS_MODULE, + .name = "mvebu-pcie", + .of_match_table = + of_match_ptr(mvebu_pcie_of_match_table), + }, +}; + +static int __init mvebu_pcie_init(void) +{ + return platform_driver_probe(&mvebu_pcie_driver, + mvebu_pcie_probe); +} + +subsys_initcall(mvebu_pcie_init); + +MODULE_AUTHOR("Thomas Petazzoni "); +MODULE_DESCRIPTION("Marvell EBU PCIe driver"); +MODULE_LICENSE("GPLv2"); -- cgit v0.10.2