From 58968625c496c2e39545781915dbb848b38bd249 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Thu, 10 Apr 2014 16:47:19 -0700 Subject: pinctrl: single: Clear pin interrupts enabled by bootloader Since we set up device wake-up interrupts as pinctrl-single interrupts, we now must use the standard request_irq and related functions to manage them. If the pin interrupts are enabled for some pins at boot, the wake-up events can show up as constantly pending at least on omaps and will hang the system unless the related device driver clears the event at the device. To fix this, let's clear the interrupt flags during init, and print out a warning so the board maintainers can update their drivers to do proper request_irq for the driver specific wake-up events. Cc: Haojian Zhuang Cc: Linus Walleij Signed-off-by: Tony Lindgren Signed-off-by: Linus Walleij diff --git a/drivers/pinctrl/pinctrl-single.c b/drivers/pinctrl/pinctrl-single.c index 81075f2..2960557 100644 --- a/drivers/pinctrl/pinctrl-single.c +++ b/drivers/pinctrl/pinctrl-single.c @@ -810,6 +810,7 @@ static const struct pinconf_ops pcs_pinconf_ops = { static int pcs_add_pin(struct pcs_device *pcs, unsigned offset, unsigned pin_pos) { + struct pcs_soc_data *pcs_soc = &pcs->socdata; struct pinctrl_pin_desc *pin; struct pcs_name *pn; int i; @@ -821,6 +822,18 @@ static int pcs_add_pin(struct pcs_device *pcs, unsigned offset, return -ENOMEM; } + if (pcs_soc->irq_enable_mask) { + unsigned val; + + val = pcs->read(pcs->base + offset); + if (val & pcs_soc->irq_enable_mask) { + dev_dbg(pcs->dev, "irq enabled at boot for pin at %lx (%x), clearing\n", + (unsigned long)pcs->res->start + offset, val); + val &= ~pcs_soc->irq_enable_mask; + pcs->write(val, pcs->base + offset); + } + } + pin = &pcs->pins.pa[i]; pn = &pcs->names[i]; sprintf(pn->name, "%lx.%d", -- cgit v0.10.2