From 0207a2efb43d81e29e23662b5d035945688a103f Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Thu, 16 Apr 2009 14:40:56 +0900 Subject: sh: Add support for SH7724 (SH-Mobile R2R) CPU subtype. This implements initial support for the SH-Mobile R2R CPU. Based on Rev 0.11 of the initial SH7724 hardware manual. Signed-off-by: Kuninori Morimoto Signed-off-by: Paul Mundt diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig index e7390dd..505d1ac 100644 --- a/arch/sh/Kconfig +++ b/arch/sh/Kconfig @@ -347,6 +347,15 @@ config CPU_SUBTYPE_SH7723 help Select SH7723 if you have an SH-MobileR2 CPU. +config CPU_SUBTYPE_SH7724 + bool "Support SH7724 processor" + select CPU_SH4A + select CPU_SHX2 + select ARCH_SPARSEMEM_ENABLE + select SYS_SUPPORTS_CMT + help + Select SH7724 if you have an SH-MobileR2R CPU. + config CPU_SUBTYPE_SH7763 bool "Support SH7763 processor" select CPU_SH4A @@ -495,6 +504,7 @@ config SH_PCLK_FREQ CPU_SUBTYPE_SH7203 || CPU_SUBTYPE_SH7206 || \ CPU_SUBTYPE_SH7263 || CPU_SUBTYPE_MXG || \ CPU_SUBTYPE_SH7786 + default "41666666" if CPU_SUBTYPE_SH7724 default "60000000" if CPU_SUBTYPE_SH7751 || CPU_SUBTYPE_SH7751R default "66000000" if CPU_SUBTYPE_SH4_202 default "50000000" diff --git a/arch/sh/include/asm/processor.h b/arch/sh/include/asm/processor.h index 1fd58b4..005c962 100644 --- a/arch/sh/include/asm/processor.h +++ b/arch/sh/include/asm/processor.h @@ -32,7 +32,7 @@ enum cpu_type { /* SH-4A types */ CPU_SH7763, CPU_SH7770, CPU_SH7780, CPU_SH7781, CPU_SH7785, CPU_SH7786, - CPU_SH7723, CPU_SHX3, + CPU_SH7723, CPU_SH7724, CPU_SHX3, /* SH4AL-DSP types */ CPU_SH7343, CPU_SH7722, CPU_SH7366, diff --git a/arch/sh/include/cpu-sh4/cpu/freq.h b/arch/sh/include/cpu-sh4/cpu/freq.h index 749d1c4..ccf1d99 100644 --- a/arch/sh/include/cpu-sh4/cpu/freq.h +++ b/arch/sh/include/cpu-sh4/cpu/freq.h @@ -25,6 +25,24 @@ #elif defined(CONFIG_CPU_SUBTYPE_SH7763) || \ defined(CONFIG_CPU_SUBTYPE_SH7780) #define FRQCR 0xffc80000 +#elif defined(CONFIG_CPU_SUBTYPE_SH7724) +#define FRQCRA 0xa4150000 +#define FRQCRB 0xa4150004 +#define VCLKCR 0xa4150048 + +#define FCLKACR 0xa4150008 +#define FCLKBCR 0xa415000c +#define FRQCR FRQCRA +#define SCLKACR FCLKACR +#define SCLKBCR FCLKBCR +#define FCLKACR 0xa4150008 +#define FCLKBCR 0xa415000c +#define IrDACLKCR 0xa4150018 + +#define MSTPCR0 0xa4150030 +#define MSTPCR1 0xa4150034 +#define MSTPCR2 0xa4150038 + #elif defined(CONFIG_CPU_SUBTYPE_SH7785) #define FRQCR0 0xffc80000 #define FRQCR1 0xffc80004 diff --git a/arch/sh/include/cpu-sh4/cpu/sh7724.h b/arch/sh/include/cpu-sh4/cpu/sh7724.h new file mode 100644 index 0000000..34605c9e3 --- /dev/null +++ b/arch/sh/include/cpu-sh4/cpu/sh7724.h @@ -0,0 +1,255 @@ +#ifndef __ASM_SH7724_H__ +#define __ASM_SH7724_H__ + +enum { + /* PTA */ + GPIO_PTA7, GPIO_PTA6, GPIO_PTA5, GPIO_PTA4, + GPIO_PTA3, GPIO_PTA2, GPIO_PTA1, GPIO_PTA0, + + /* PTB */ + GPIO_PTB7, GPIO_PTB6, GPIO_PTB5, GPIO_PTB4, + GPIO_PTB3, GPIO_PTB2, GPIO_PTB1, GPIO_PTB0, + + /* PTC */ + GPIO_PTC7, GPIO_PTC6, GPIO_PTC5, GPIO_PTC4, + GPIO_PTC3, GPIO_PTC2, GPIO_PTC1, GPIO_PTC0, + + /* PTD */ + GPIO_PTD7, GPIO_PTD6, GPIO_PTD5, GPIO_PTD4, + GPIO_PTD3, GPIO_PTD2, GPIO_PTD1, GPIO_PTD0, + + /* PTE */ + GPIO_PTE7, GPIO_PTE6, GPIO_PTE5, GPIO_PTE4, + GPIO_PTE3, GPIO_PTE2, GPIO_PTE1, GPIO_PTE0, + + /* PTF */ + GPIO_PTF7, GPIO_PTF6, GPIO_PTF5, GPIO_PTF4, + GPIO_PTF3, GPIO_PTF2, GPIO_PTF1, GPIO_PTF0, + + /* PTG */ + GPIO_PTG5, GPIO_PTG4, + GPIO_PTG3, GPIO_PTG2, GPIO_PTG1, GPIO_PTG0, + + /* PTH */ + GPIO_PTH7, GPIO_PTH6, GPIO_PTH5, GPIO_PTH4, + GPIO_PTH3, GPIO_PTH2, GPIO_PTH1, GPIO_PTH0, + + /* PTJ */ + GPIO_PTJ7, GPIO_PTJ6, GPIO_PTJ5, + GPIO_PTJ3, GPIO_PTJ2, GPIO_PTJ1, GPIO_PTJ0, + + /* PTK */ + GPIO_PTK7, GPIO_PTK6, GPIO_PTK5, GPIO_PTK4, + GPIO_PTK3, GPIO_PTK2, GPIO_PTK1, GPIO_PTK0, + + /* PTL */ + GPIO_PTL7, GPIO_PTL6, GPIO_PTL5, GPIO_PTL4, + GPIO_PTL3, GPIO_PTL2, GPIO_PTL1, GPIO_PTL0, + + /* PTM */ + GPIO_PTM7, GPIO_PTM6, GPIO_PTM5, GPIO_PTM4, + GPIO_PTM3, GPIO_PTM2, GPIO_PTM1, GPIO_PTM0, + + /* PTN */ + GPIO_PTN7, GPIO_PTN6, GPIO_PTN5, GPIO_PTN4, + GPIO_PTN3, GPIO_PTN2, GPIO_PTN1, GPIO_PTN0, + + /* PTQ */ + GPIO_PTQ7, GPIO_PTQ6, GPIO_PTQ5, GPIO_PTQ4, + GPIO_PTQ3, GPIO_PTQ2, GPIO_PTQ1, GPIO_PTQ0, + + /* PTR */ + GPIO_PTR7, GPIO_PTR6, GPIO_PTR5, GPIO_PTR4, + GPIO_PTR3, GPIO_PTR2, GPIO_PTR1, GPIO_PTR0, + + /* PTS */ + GPIO_PTS6, GPIO_PTS5, GPIO_PTS4, + GPIO_PTS3, GPIO_PTS2, GPIO_PTS1, GPIO_PTS0, + + /* PTT */ + GPIO_PTT7, GPIO_PTT6, GPIO_PTT5, GPIO_PTT4, + GPIO_PTT3, GPIO_PTT2, GPIO_PTT1, GPIO_PTT0, + + /* PTU */ + GPIO_PTU7, GPIO_PTU6, GPIO_PTU5, GPIO_PTU4, + GPIO_PTU3, GPIO_PTU2, GPIO_PTU1, GPIO_PTU0, + + /* PTV */ + GPIO_PTV7, GPIO_PTV6, GPIO_PTV5, GPIO_PTV4, + GPIO_PTV3, GPIO_PTV2, GPIO_PTV1, GPIO_PTV0, + + /* PTW */ + GPIO_PTW7, GPIO_PTW6, GPIO_PTW5, GPIO_PTW4, + GPIO_PTW3, GPIO_PTW2, GPIO_PTW1, GPIO_PTW0, + + /* PTX */ + GPIO_PTX7, GPIO_PTX6, GPIO_PTX5, GPIO_PTX4, + GPIO_PTX3, GPIO_PTX2, GPIO_PTX1, GPIO_PTX0, + + /* PTY */ + GPIO_PTY7, GPIO_PTY6, GPIO_PTY5, GPIO_PTY4, + GPIO_PTY3, GPIO_PTY2, GPIO_PTY1, GPIO_PTY0, + + /* PTZ */ + GPIO_PTZ7, GPIO_PTZ6, GPIO_PTZ5, GPIO_PTZ4, + GPIO_PTZ3, GPIO_PTZ2, GPIO_PTZ1, GPIO_PTZ0, + + /* BSC (PTA/PTB/PTJ/PTQ/PTR/PTT) */ + GPIO_FN_D31, GPIO_FN_D30, GPIO_FN_D29, GPIO_FN_D28, + GPIO_FN_D27, GPIO_FN_D26, GPIO_FN_D25, GPIO_FN_D24, + GPIO_FN_D23, GPIO_FN_D22, GPIO_FN_D21, GPIO_FN_D20, + GPIO_FN_D19, GPIO_FN_D18, GPIO_FN_D17, GPIO_FN_D16, + GPIO_FN_D15, GPIO_FN_D14, GPIO_FN_D13, GPIO_FN_D12, + GPIO_FN_D11, GPIO_FN_D10, GPIO_FN_D9, GPIO_FN_D8, + GPIO_FN_D7, GPIO_FN_D6, GPIO_FN_D5, GPIO_FN_D4, + GPIO_FN_D3, GPIO_FN_D2, GPIO_FN_D1, GPIO_FN_D0, + GPIO_FN_A25, GPIO_FN_A24, GPIO_FN_A23, GPIO_FN_A22, + GPIO_FN_CS6B_CE1B, GPIO_FN_CS6A_CE2B, + GPIO_FN_CS5B_CE1A, GPIO_FN_CS5A_CE2A, + GPIO_FN_WE3_ICIOWR, GPIO_FN_WE2_ICIORD, + GPIO_FN_IOIS16, GPIO_FN_WAIT, + GPIO_FN_BS, + + /* KEYSC (PTA/PTB)*/ + GPIO_FN_KEYOUT5_IN5, GPIO_FN_KEYOUT4_IN6, GPIO_FN_KEYIN4, + GPIO_FN_KEYIN3, GPIO_FN_KEYIN2, GPIO_FN_KEYIN1, GPIO_FN_KEYIN0, + GPIO_FN_KEYOUT3, GPIO_FN_KEYOUT2, GPIO_FN_KEYOUT1, GPIO_FN_KEYOUT0, + + /* ATAPI (PTA/PTB/PTK/PTR/PTS/PTW) */ + GPIO_FN_IDED15, GPIO_FN_IDED14, GPIO_FN_IDED13, GPIO_FN_IDED12, + GPIO_FN_IDED11, GPIO_FN_IDED10, GPIO_FN_IDED9, GPIO_FN_IDED8, + GPIO_FN_IDED7, GPIO_FN_IDED6, GPIO_FN_IDED5, GPIO_FN_IDED4, + GPIO_FN_IDED3, GPIO_FN_IDED2, GPIO_FN_IDED1, GPIO_FN_IDED0, + GPIO_FN_IDEA2, GPIO_FN_IDEA1, GPIO_FN_IDEA0, GPIO_FN_IDEIOWR, + GPIO_FN_IODREQ, GPIO_FN_IDECS0, GPIO_FN_IDECS1, GPIO_FN_IDEIORD, + GPIO_FN_DIRECTION, GPIO_FN_EXBUF_ENB, GPIO_FN_IDERST, GPIO_FN_IODACK, + GPIO_FN_IDEINT, GPIO_FN_IDEIORDY, + + /* TPU (PTB/PTR/PTS) */ + GPIO_FN_TPUTO3, GPIO_FN_TPUTO2, GPIO_FN_TPUTO1, GPIO_FN_TPUTO0, + GPIO_FN_TPUTI3, GPIO_FN_TPUTI2, + + /* LCDC (PTC/PTD/PTE/PTF/PTM/PTR) */ + GPIO_FN_LCDD23, GPIO_FN_LCDD22, GPIO_FN_LCDD21, GPIO_FN_LCDD20, + GPIO_FN_LCDD19, GPIO_FN_LCDD18, GPIO_FN_LCDD17, GPIO_FN_LCDD16, + GPIO_FN_LCDD15, GPIO_FN_LCDD14, GPIO_FN_LCDD13, GPIO_FN_LCDD12, + GPIO_FN_LCDD11, GPIO_FN_LCDD10, GPIO_FN_LCDD9, GPIO_FN_LCDD8, + GPIO_FN_LCDD7, GPIO_FN_LCDD6, GPIO_FN_LCDD5, GPIO_FN_LCDD4, + GPIO_FN_LCDD3, GPIO_FN_LCDD2, GPIO_FN_LCDD1, GPIO_FN_LCDD0, + GPIO_FN_LCDVSYN, GPIO_FN_LCDDISP, GPIO_FN_LCDRS, GPIO_FN_LCDHSYN, + GPIO_FN_LCDCS, GPIO_FN_LCDDON, GPIO_FN_LCDDCK, GPIO_FN_LCDWR, + GPIO_FN_LCDVEPWC, GPIO_FN_LCDVCPWC, GPIO_FN_LCDRD, GPIO_FN_LCDLCLK, + + /* SCIF0 (PTF/PTM) */ + GPIO_FN_SCIF0_TXD, GPIO_FN_SCIF0_RXD, GPIO_FN_SCIF0_SCK, + + /* SCIF1 (PTL) */ + GPIO_FN_SCIF1_SCK, GPIO_FN_SCIF1_RXD, GPIO_FN_SCIF1_TXD, + + /* SCIF2 (PTE/PTF/PTN) with LCDC, VOU */ + GPIO_FN_SCIF2_L_TXD, GPIO_FN_SCIF2_L_SCK, GPIO_FN_SCIF2_L_RXD, + GPIO_FN_SCIF2_V_TXD, GPIO_FN_SCIF2_V_SCK, GPIO_FN_SCIF2_V_RXD, + + /* SCIF3 (PTL/PTN/PTZ) with VOU, IRQ */ + GPIO_FN_SCIF3_V_SCK, GPIO_FN_SCIF3_V_RXD, GPIO_FN_SCIF3_V_TXD, + GPIO_FN_SCIF3_V_CTS, GPIO_FN_SCIF3_V_RTS, + GPIO_FN_SCIF3_I_SCK, GPIO_FN_SCIF3_I_RXD, GPIO_FN_SCIF3_I_TXD, + GPIO_FN_SCIF3_I_CTS, GPIO_FN_SCIF3_I_RTS, + + /* SCIF4 (PTE) */ + GPIO_FN_SCIF4_SCK, GPIO_FN_SCIF4_RXD, GPIO_FN_SCIF4_TXD, + + /* SCIF5 (PTS) */ + GPIO_FN_SCIF5_SCK, GPIO_FN_SCIF5_RXD, GPIO_FN_SCIF5_TXD, + + /* FSI (PTE/PTU/PTV) */ + GPIO_FN_FSIMCKB, GPIO_FN_FSIMCKA, GPIO_FN_FSIOASD, + GPIO_FN_FSIIABCK, GPIO_FN_FSIIALRCK, GPIO_FN_FSIOABCK, + GPIO_FN_FSIOALRCK, GPIO_FN_CLKAUDIOAO, GPIO_FN_FSIIBSD, + GPIO_FN_FSIOBSD, GPIO_FN_FSIIBBCK, GPIO_FN_FSIIBLRCK, + GPIO_FN_FSIOBBCK, GPIO_FN_FSIOBLRCK, GPIO_FN_CLKAUDIOBO, + GPIO_FN_FSIIASD, + + /* AUD (PTG) */ + GPIO_FN_AUDCK, GPIO_FN_AUDSYNC, GPIO_FN_AUDATA3, + GPIO_FN_AUDATA2, GPIO_FN_AUDATA1, GPIO_FN_AUDATA0, + + /* VIO (PTS) (common?) */ + GPIO_FN_VIO_CKO, + + /* VIO0 (PTH/PTK) */ + GPIO_FN_VIO0_D15, GPIO_FN_VIO0_D14, GPIO_FN_VIO0_D13, GPIO_FN_VIO0_D12, + GPIO_FN_VIO0_D11, GPIO_FN_VIO0_D10, GPIO_FN_VIO0_D9, GPIO_FN_VIO0_D8, + GPIO_FN_VIO0_D7, GPIO_FN_VIO0_D6, GPIO_FN_VIO0_D5, GPIO_FN_VIO0_D4, + GPIO_FN_VIO0_D3, GPIO_FN_VIO0_D2, GPIO_FN_VIO0_D1, GPIO_FN_VIO0_D0, + GPIO_FN_VIO0_VD, GPIO_FN_VIO0_CLK, + GPIO_FN_VIO0_FLD, GPIO_FN_VIO0_HD, + + /* VIO1 (PTK/PTS) */ + GPIO_FN_VIO1_D7, GPIO_FN_VIO1_D6, GPIO_FN_VIO1_D5, GPIO_FN_VIO1_D4, + GPIO_FN_VIO1_D3, GPIO_FN_VIO1_D2, GPIO_FN_VIO1_D1, GPIO_FN_VIO1_D0, + GPIO_FN_VIO1_FLD, GPIO_FN_VIO1_HD, GPIO_FN_VIO1_VD, GPIO_FN_VIO1_CLK, + + /* Eth (PTL/PTN/PTX) */ + GPIO_FN_RMII_RXD0, GPIO_FN_RMII_RXD1, + GPIO_FN_RMII_TXD0, GPIO_FN_RMII_TXD1, + GPIO_FN_RMII_REF_CLK, GPIO_FN_RMII_TX_EN, + GPIO_FN_RMII_RX_ER, GPIO_FN_RMII_CRS_DV, + GPIO_FN_LNKSTA, GPIO_FN_MDIO, + GPIO_FN_MDC, + + /* System (PTJ) */ + GPIO_FN_PDSTATUS, GPIO_FN_STATUS2, GPIO_FN_STATUS0, + + /* VOU (PTL/PTM/PTN*/ + GPIO_FN_DV_D15, GPIO_FN_DV_D14, GPIO_FN_DV_D13, GPIO_FN_DV_D12, + GPIO_FN_DV_D11, GPIO_FN_DV_D10, GPIO_FN_DV_D9, GPIO_FN_DV_D8, + GPIO_FN_DV_D7, GPIO_FN_DV_D6, GPIO_FN_DV_D5, GPIO_FN_DV_D4, + GPIO_FN_DV_D3, GPIO_FN_DV_D2, GPIO_FN_DV_D1, GPIO_FN_DV_D0, + GPIO_FN_DV_CLKI, GPIO_FN_DV_CLK, GPIO_FN_DV_VSYNC, GPIO_FN_DV_HSYNC, + + /* MSIOF0 (PTL/PTM) */ + GPIO_FN_MSIOF0_RXD, GPIO_FN_MSIOF0_TXD, + GPIO_FN_MSIOF0_MCK, GPIO_FN_MSIOF0_TSCK, + GPIO_FN_MSIOF0_SS1, GPIO_FN_MSIOF0_SS2, + GPIO_FN_MSIOF0_TSYNC, GPIO_FN_MSIOF0_RSCK, + GPIO_FN_MSIOF0_RSYNC, + + /* MSIOF1 (PTV) */ + GPIO_FN_MSIOF1_RXD, GPIO_FN_MSIOF1_TXD, + GPIO_FN_MSIOF1_MCK, GPIO_FN_MSIOF1_TSCK, + GPIO_FN_MSIOF1_SS1, GPIO_FN_MSIOF1_SS2, + GPIO_FN_MSIOF1_TSYNC, GPIO_FN_MSIOF1_RSCK, + GPIO_FN_MSIOF1_RSYNC, + + /* DMAC (PTU/PTX) */ + GPIO_FN_DMAC_DACK0, GPIO_FN_DMAC_DREQ0, + GPIO_FN_DMAC_DACK1, GPIO_FN_DMAC_DREQ1, + + /* SDHI0 (PTY) */ + GPIO_FN_SDHI0CD, GPIO_FN_SDHI0WP, GPIO_FN_SDHI0CMD, GPIO_FN_SDHI0CLK, + GPIO_FN_SDHI0D3, GPIO_FN_SDHI0D2, GPIO_FN_SDHI0D1, GPIO_FN_SDHI0D0, + + /* SDHI1 (PTW) */ + GPIO_FN_SDHI1CD, GPIO_FN_SDHI1WP, GPIO_FN_SDHI1CMD, GPIO_FN_SDHI1CLK, + GPIO_FN_SDHI1D3, GPIO_FN_SDHI1D2, GPIO_FN_SDHI1D1, GPIO_FN_SDHI1D0, + + /* MMC (PTW/PTX)*/ + GPIO_FN_MMC_D7, GPIO_FN_MMC_D6, GPIO_FN_MMC_D5, GPIO_FN_MMC_D4, + GPIO_FN_MMC_D3, GPIO_FN_MMC_D2, GPIO_FN_MMC_D1, GPIO_FN_MMC_D0, + GPIO_FN_MMC_CLK, GPIO_FN_MMC_CMD, + + /* IrDA (PTX) */ + GPIO_FN_IRDA_OUT, GPIO_FN_IRDA_IN, + + /* TSIF (PTX) */ + GPIO_FN_TSIF_TS0_SDAT, GPIO_FN_TSIF_TS0_SCK, + GPIO_FN_TSIF_TS0_SDEN, GPIO_FN_TSIF_TS0_SPSYNC, + + /* IRQ (PTZ) */ + GPIO_FN_INTC_IRQ7, GPIO_FN_INTC_IRQ6, GPIO_FN_INTC_IRQ5, + GPIO_FN_INTC_IRQ4, GPIO_FN_INTC_IRQ3, GPIO_FN_INTC_IRQ2, + GPIO_FN_INTC_IRQ1, GPIO_FN_INTC_IRQ0, +}; + +#endif /* __ASM_SH7724_H__ */ diff --git a/arch/sh/kernel/cpu/sh4/probe.c b/arch/sh/kernel/cpu/sh4/probe.c index 91e3677..973ff83 100644 --- a/arch/sh/kernel/cpu/sh4/probe.c +++ b/arch/sh/kernel/cpu/sh4/probe.c @@ -156,6 +156,12 @@ int __init detect_cpu_and_cache_system(void) break; } break; + case 0x300b: + boot_cpu_data.type = CPU_SH7724; + boot_cpu_data.icache.ways = 4; + boot_cpu_data.dcache.ways = 4; + boot_cpu_data.flags |= CPU_HAS_LLSC | CPU_HAS_FPU; + break; case 0x4000: /* 1st cut */ case 0x4001: /* 2nd cut */ boot_cpu_data.type = CPU_SHX3; diff --git a/arch/sh/kernel/cpu/sh4a/Makefile b/arch/sh/kernel/cpu/sh4a/Makefile index 1a92361..afd6fba4 100644 --- a/arch/sh/kernel/cpu/sh4a/Makefile +++ b/arch/sh/kernel/cpu/sh4a/Makefile @@ -11,6 +11,7 @@ obj-$(CONFIG_CPU_SUBTYPE_SH7786) += setup-sh7786.o obj-$(CONFIG_CPU_SUBTYPE_SH7343) += setup-sh7343.o obj-$(CONFIG_CPU_SUBTYPE_SH7722) += setup-sh7722.o obj-$(CONFIG_CPU_SUBTYPE_SH7723) += setup-sh7723.o +obj-$(CONFIG_CPU_SUBTYPE_SH7724) += setup-sh7724.o obj-$(CONFIG_CPU_SUBTYPE_SH7366) += setup-sh7366.o obj-$(CONFIG_CPU_SUBTYPE_SHX3) += setup-shx3.o @@ -26,12 +27,14 @@ clock-$(CONFIG_CPU_SUBTYPE_SH7786) := clock-sh7786.o clock-$(CONFIG_CPU_SUBTYPE_SH7343) := clock-sh7722.o clock-$(CONFIG_CPU_SUBTYPE_SH7722) := clock-sh7722.o clock-$(CONFIG_CPU_SUBTYPE_SH7723) := clock-sh7722.o +clock-$(CONFIG_CPU_SUBTYPE_SH7724) := clock-sh7722.o clock-$(CONFIG_CPU_SUBTYPE_SH7366) := clock-sh7722.o clock-$(CONFIG_CPU_SUBTYPE_SHX3) := clock-shx3.o # Pinmux setup pinmux-$(CONFIG_CPU_SUBTYPE_SH7722) := pinmux-sh7722.o pinmux-$(CONFIG_CPU_SUBTYPE_SH7723) := pinmux-sh7723.o +pinmux-$(CONFIG_CPU_SUBTYPE_SH7724) := pinmux-sh7724.o pinmux-$(CONFIG_CPU_SUBTYPE_SH7785) := pinmux-sh7785.o pinmux-$(CONFIG_CPU_SUBTYPE_SH7786) := pinmux-sh7786.o diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh7722.c b/arch/sh/kernel/cpu/sh4a/clock-sh7722.c index 0e174af..1ccdfc5 100644 --- a/arch/sh/kernel/cpu/sh4a/clock-sh7722.c +++ b/arch/sh/kernel/cpu/sh4a/clock-sh7722.c @@ -130,6 +130,12 @@ static void adjust_clocks(int originate, int *l, unsigned long v[], * is quite simple.. */ +#if defined(CONFIG_CPU_SUBTYPE_SH7724) +#define STCPLL(frqcr) ((((frqcr >> 24) & 0x3f) + 1) * 2) +#else +#define STCPLL(frqcr) (((frqcr >> 24) & 0x1f) + 1) +#endif + /* * Instead of having two separate multipliers/divisors set, like this: * @@ -139,13 +145,17 @@ static void adjust_clocks(int originate, int *l, unsigned long v[], * I created the divisors2 array, which is used to calculate rate like * rate = parent * 2 / divisors2[ divisor ]; */ +#if defined(CONFIG_CPU_SUBTYPE_SH7724) +static int divisors2[] = { 4, 1, 8, 12, 16, 24, 32, 1, 48, 64, 72, 96, 1, 144 }; +#else static int divisors2[] = { 2, 3, 4, 5, 6, 8, 10, 12, 16, 20, 24, 32, 40 }; +#endif static void master_clk_recalc(struct clk *clk) { unsigned frqcr = ctrl_inl(FRQCR); - clk->rate = CONFIG_SH_PCLK_FREQ * (((frqcr >> 24) & 0x1f) + 1); + clk->rate = CONFIG_SH_PCLK_FREQ * STCPLL(frqcr); } static void master_clk_init(struct clk *clk) @@ -161,13 +171,30 @@ static void module_clk_recalc(struct clk *clk) { unsigned long frqcr = ctrl_inl(FRQCR); - clk->rate = clk->parent->rate / (((frqcr >> 24) & 0x1f) + 1); + clk->rate = clk->parent->rate / STCPLL(frqcr); } +#if defined(CONFIG_CPU_SUBTYPE_SH7724) +#define MASTERDIVS { 12, 16, 24, 30, 32, 36, 48 } +#define STCMASK 0x3f +#define DIVCALC(div) (div/2-1) +#define FRQCRKICK 0x80000000 +#elif defined(CONFIG_CPU_SUBTYPE_SH7723) +#define MASTERDIVS { 6, 8, 12, 16 } +#define STCMASK 0x1f +#define DIVCALC(div) (div-1) +#define FRQCRKICK 0x00000000 +#else +#define MASTERDIVS { 2, 3, 4, 6, 8, 16 } +#define STCMASK 0x1f +#define DIVCALC(div) (div-1) +#define FRQCRKICK 0x00000000 +#endif + static int master_clk_setrate(struct clk *clk, unsigned long rate, int id) { int div = rate / clk->rate; - int master_divs[] = { 2, 3, 4, 6, 8, 16 }; + int master_divs[] = MASTERDIVS; int index; unsigned long frqcr; @@ -180,8 +207,9 @@ static int master_clk_setrate(struct clk *clk, unsigned long rate, int id) div = master_divs[index - 1]; frqcr = ctrl_inl(FRQCR); - frqcr &= ~(0xF << 24); - frqcr |= ( (div-1) << 24); + frqcr &= ~(STCMASK << 24); + frqcr |= (DIVCALC(div) << 24); + frqcr |= FRQCRKICK; ctrl_outl(frqcr, FRQCR); return 0; @@ -377,6 +405,7 @@ static int sh7722_frqcr_set_rate(struct clk *clk, unsigned long rate, /* clear FRQCR bits */ frqcr &= ~(ctx.mask << ctx.shift); frqcr |= div << ctx.shift; + frqcr |= FRQCRKICK; /* ...and perform actual change */ ctrl_outl(frqcr, FRQCR); @@ -542,8 +571,8 @@ static struct clk sh7722_r_clock = { .flags = CLK_RATE_PROPAGATES, }; -#ifndef CONFIG_CPU_SUBTYPE_SH7343 - +#if !defined(CONFIG_CPU_SUBTYPE_SH7343) &&\ + !defined(CONFIG_CPU_SUBTYPE_SH7724) /* * these three clocks - SIU A, SIU B, IrDA - share the same clk_ops * methods of clk_ops determine which register they should access by @@ -560,15 +589,16 @@ static struct clk sh7722_siu_b_clock = { .arch_flags = SCLKBCR, .ops = &sh7722_siu_clk_ops, }; +#endif /* CONFIG_CPU_SUBTYPE_SH7343, SH7724 */ -#if defined(CONFIG_CPU_SUBTYPE_SH7722) +#if defined(CONFIG_CPU_SUBTYPE_SH7722) ||\ + defined(CONFIG_CPU_SUBTYPE_SH7724) static struct clk sh7722_irda_clock = { .name = "irda_clk", .arch_flags = IrDACLKCR, .ops = &sh7722_siu_clk_ops, }; #endif -#endif /* CONFIG_CPU_SUBTYPE_SH7343 */ static struct clk sh7722_video_clock = { .name = "video_clk", @@ -715,6 +745,61 @@ static struct clk sh7722_mstpcr_clocks[] = { MSTPCR("vpu0", "bus_clk", 2, 1), MSTPCR("lcdc0", "bus_clk", 2, 0), #endif +#if defined(CONFIG_CPU_SUBTYPE_SH7724) + /* See Datasheet : Overview -> Block Diagram */ + MSTPCR("tlb0", "cpu_clk", 0, 31), + MSTPCR("ic0", "cpu_clk", 0, 30), + MSTPCR("oc0", "cpu_clk", 0, 29), + MSTPCR("rs0", "bus_clk", 0, 28), + MSTPCR("ilmem0", "cpu_clk", 0, 27), + MSTPCR("l2c0", "sh_clk", 0, 26), + MSTPCR("fpu0", "cpu_clk", 0, 24), + MSTPCR("intc0", "peripheral_clk", 0, 22), + MSTPCR("dmac0", "bus_clk", 0, 21), + MSTPCR("sh0", "sh_clk", 0, 20), + MSTPCR("hudi0", "peripheral_clk", 0, 19), + MSTPCR("ubc0", "cpu_clk", 0, 17), + MSTPCR("tmu0", "peripheral_clk", 0, 15), + MSTPCR("cmt0", "r_clk", 0, 14), + MSTPCR("rwdt0", "r_clk", 0, 13), + MSTPCR("dmac1", "bus_clk", 0, 12), + MSTPCR("tmu1", "peripheral_clk", 0, 10), + MSTPCR("scif0", "peripheral_clk", 0, 9), + MSTPCR("scif1", "peripheral_clk", 0, 8), + MSTPCR("scif2", "peripheral_clk", 0, 7), + MSTPCR("scif3", "bus_clk", 0, 6), + MSTPCR("scif4", "bus_clk", 0, 5), + MSTPCR("scif5", "bus_clk", 0, 4), + MSTPCR("msiof0", "bus_clk", 0, 2), + MSTPCR("msiof1", "bus_clk", 0, 1), + MSTPCR("keysc0", "r_clk", 1, 12), + MSTPCR("rtc0", "r_clk", 1, 11), + MSTPCR("i2c0", "peripheral_clk", 1, 9), + MSTPCR("i2c1", "peripheral_clk", 1, 8), + MSTPCR("mmc0", "bus_clk", 2, 29), + MSTPCR("eth0", "bus_clk", 2, 28), + MSTPCR("atapi0", "bus_clk", 2, 26), + MSTPCR("tpu0", "bus_clk", 2, 25), + MSTPCR("irda0", "peripheral_clk", 2, 24), + MSTPCR("tsif0", "bus_clk", 2, 22), + MSTPCR("usb1", "bus_clk", 2, 21), + MSTPCR("usb0", "bus_clk", 2, 20), + MSTPCR("2dg0", "bus_clk", 2, 19), + MSTPCR("sdhi0", "bus_clk", 2, 18), + MSTPCR("sdhi1", "bus_clk", 2, 17), + MSTPCR("veu1", "bus_clk", 2, 15), + MSTPCR("ceu1", "bus_clk", 2, 13), + MSTPCR("beu1", "bus_clk", 2, 12), + MSTPCR("2ddmac0", "sh_clk", 2, 10), + MSTPCR("spu0", "bus_clk", 2, 9), + MSTPCR("jpu0", "bus_clk", 2, 6), + MSTPCR("vou0", "bus_clk", 2, 5), + MSTPCR("beu0", "bus_clk", 2, 4), + MSTPCR("ceu0", "bus_clk", 2, 3), + MSTPCR("veu0", "bus_clk", 2, 2), + MSTPCR("vpu0", "bus_clk", 2, 1), + MSTPCR("lcdc0", "bus_clk", 2, 0), +#endif #if defined(CONFIG_CPU_SUBTYPE_SH7343) MSTPCR("uram0", "umem_clk", 0, 28), MSTPCR("xymem0", "bus_clk", 0, 26), @@ -786,12 +871,15 @@ static struct clk *sh7722_clocks[] = { &sh7722_sh_clock, &sh7722_peripheral_clock, &sh7722_sdram_clock, -#ifndef CONFIG_CPU_SUBTYPE_SH7343 +#if !defined(CONFIG_CPU_SUBTYPE_SH7343) &&\ + !defined(CONFIG_CPU_SUBTYPE_SH7724) &sh7722_siu_a_clock, &sh7722_siu_b_clock, -#if defined(CONFIG_CPU_SUBTYPE_SH7722) - &sh7722_irda_clock, #endif +/* 7724 should support FSI clock */ +#if defined(CONFIG_CPU_SUBTYPE_SH7722) || \ + defined(CONFIG_CPU_SUBTYPE_SH7724) + &sh7722_irda_clock, #endif &sh7722_video_clock, }; diff --git a/arch/sh/kernel/cpu/sh4a/pinmux-sh7724.c b/arch/sh/kernel/cpu/sh4a/pinmux-sh7724.c new file mode 100644 index 0000000..1af0f95 --- /dev/null +++ b/arch/sh/kernel/cpu/sh4a/pinmux-sh7724.c @@ -0,0 +1,2230 @@ +/* + * SH7724 Pinmux + * + * Copyright (C) 2009 Renesas Solutions Corp. + * + * Kuninori Morimoto + * + * Based on SH7723 Pinmux + * Copyright (C) 2008 Magnus Damm + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ + +#include +#include +#include +#include + +enum { + PINMUX_RESERVED = 0, + + PINMUX_DATA_BEGIN, + PTA7_DATA, PTA6_DATA, PTA5_DATA, PTA4_DATA, + PTA3_DATA, PTA2_DATA, PTA1_DATA, PTA0_DATA, + PTB7_DATA, PTB6_DATA, PTB5_DATA, PTB4_DATA, + PTB3_DATA, PTB2_DATA, PTB1_DATA, PTB0_DATA, + PTC7_DATA, PTC6_DATA, PTC5_DATA, PTC4_DATA, + PTC3_DATA, PTC2_DATA, PTC1_DATA, PTC0_DATA, + PTD7_DATA, PTD6_DATA, PTD5_DATA, PTD4_DATA, + PTD3_DATA, PTD2_DATA, PTD1_DATA, PTD0_DATA, + PTE7_DATA, PTE6_DATA, PTE5_DATA, PTE4_DATA, + PTE3_DATA, PTE2_DATA, PTE1_DATA, PTE0_DATA, + PTF7_DATA, PTF6_DATA, PTF5_DATA, PTF4_DATA, + PTF3_DATA, PTF2_DATA, PTF1_DATA, PTF0_DATA, + PTG5_DATA, PTG4_DATA, + PTG3_DATA, PTG2_DATA, PTG1_DATA, PTG0_DATA, + PTH7_DATA, PTH6_DATA, PTH5_DATA, PTH4_DATA, + PTH3_DATA, PTH2_DATA, PTH1_DATA, PTH0_DATA, + PTJ7_DATA, PTJ6_DATA, PTJ5_DATA, + PTJ3_DATA, PTJ2_DATA, PTJ1_DATA, PTJ0_DATA, + PTK7_DATA, PTK6_DATA, PTK5_DATA, PTK4_DATA, + PTK3_DATA, PTK2_DATA, PTK1_DATA, PTK0_DATA, + PTL7_DATA, PTL6_DATA, PTL5_DATA, PTL4_DATA, + PTL3_DATA, PTL2_DATA, PTL1_DATA, PTL0_DATA, + PTM7_DATA, PTM6_DATA, PTM5_DATA, PTM4_DATA, + PTM3_DATA, PTM2_DATA, PTM1_DATA, PTM0_DATA, + PTN7_DATA, PTN6_DATA, PTN5_DATA, PTN4_DATA, + PTN3_DATA, PTN2_DATA, PTN1_DATA, PTN0_DATA, + PTQ7_DATA, PTQ6_DATA, PTQ5_DATA, PTQ4_DATA, + PTQ3_DATA, PTQ2_DATA, PTQ1_DATA, PTQ0_DATA, + PTR7_DATA, PTR6_DATA, PTR5_DATA, PTR4_DATA, + PTR3_DATA, PTR2_DATA, PTR1_DATA, PTR0_DATA, + PTS6_DATA, PTS5_DATA, PTS4_DATA, + PTS3_DATA, PTS2_DATA, PTS1_DATA, PTS0_DATA, + PTT7_DATA, PTT6_DATA, PTT5_DATA, PTT4_DATA, + PTT3_DATA, PTT2_DATA, PTT1_DATA, PTT0_DATA, + PTU7_DATA, PTU6_DATA, PTU5_DATA, PTU4_DATA, + PTU3_DATA, PTU2_DATA, PTU1_DATA, PTU0_DATA, + PTV7_DATA, PTV6_DATA, PTV5_DATA, PTV4_DATA, + PTV3_DATA, PTV2_DATA, PTV1_DATA, PTV0_DATA, + PTW7_DATA, PTW6_DATA, PTW5_DATA, PTW4_DATA, + PTW3_DATA, PTW2_DATA, PTW1_DATA, PTW0_DATA, + PTX7_DATA, PTX6_DATA, PTX5_DATA, PTX4_DATA, + PTX3_DATA, PTX2_DATA, PTX1_DATA, PTX0_DATA, + PTY7_DATA, PTY6_DATA, PTY5_DATA, PTY4_DATA, + PTY3_DATA, PTY2_DATA, PTY1_DATA, PTY0_DATA, + PTZ7_DATA, PTZ6_DATA, PTZ5_DATA, PTZ4_DATA, + PTZ3_DATA, PTZ2_DATA, PTZ1_DATA, PTZ0_DATA, + PINMUX_DATA_END, + + PINMUX_INPUT_BEGIN, + PTA7_IN, PTA6_IN, PTA5_IN, PTA4_IN, + PTA3_IN, PTA2_IN, PTA1_IN, PTA0_IN, + PTB7_IN, PTB6_IN, PTB5_IN, PTB4_IN, + PTB3_IN, PTB2_IN, PTB1_IN, PTB0_IN, + PTC7_IN, PTC6_IN, PTC5_IN, PTC4_IN, + PTC3_IN, PTC2_IN, PTC1_IN, PTC0_IN, + PTD7_IN, PTD6_IN, PTD5_IN, PTD4_IN, + PTD3_IN, PTD2_IN, PTD1_IN, PTD0_IN, + PTE7_IN, PTE6_IN, PTE5_IN, PTE4_IN, + PTE3_IN, PTE2_IN, PTE1_IN, PTE0_IN, + PTF7_IN, PTF6_IN, PTF5_IN, PTF4_IN, + PTF3_IN, PTF2_IN, PTF1_IN, PTF0_IN, + PTH7_IN, PTH6_IN, PTH5_IN, PTH4_IN, + PTH3_IN, PTH2_IN, PTH1_IN, PTH0_IN, + PTJ3_IN, PTJ2_IN, PTJ1_IN, PTJ0_IN, + PTK7_IN, PTK6_IN, PTK5_IN, PTK4_IN, + PTK3_IN, PTK2_IN, PTK1_IN, PTK0_IN, + PTL7_IN, PTL6_IN, PTL5_IN, PTL4_IN, + PTL3_IN, PTL2_IN, PTL1_IN, PTL0_IN, + PTM7_IN, PTM6_IN, PTM5_IN, PTM4_IN, + PTM3_IN, PTM2_IN, PTM1_IN, PTM0_IN, + PTN7_IN, PTN6_IN, PTN5_IN, PTN4_IN, + PTN3_IN, PTN2_IN, PTN1_IN, PTN0_IN, + PTQ7_IN, PTQ6_IN, PTQ5_IN, PTQ4_IN, + PTQ3_IN, PTQ2_IN, PTQ1_IN, PTQ0_IN, + PTR7_IN, PTR6_IN, PTR5_IN, PTR4_IN, + PTR3_IN, PTR2_IN, PTR1_IN, PTR0_IN, + PTS6_IN, PTS5_IN, PTS4_IN, + PTS3_IN, PTS2_IN, PTS1_IN, PTS0_IN, + PTT7_IN, PTT6_IN, PTT5_IN, PTT4_IN, + PTT3_IN, PTT2_IN, PTT1_IN, PTT0_IN, + PTU7_IN, PTU6_IN, PTU5_IN, PTU4_IN, + PTU3_IN, PTU2_IN, PTU1_IN, PTU0_IN, + PTV7_IN, PTV6_IN, PTV5_IN, PTV4_IN, + PTV3_IN, PTV2_IN, PTV1_IN, PTV0_IN, + PTW7_IN, PTW6_IN, PTW5_IN, PTW4_IN, + PTW3_IN, PTW2_IN, PTW1_IN, PTW0_IN, + PTX7_IN, PTX6_IN, PTX5_IN, PTX4_IN, + PTX3_IN, PTX2_IN, PTX1_IN, PTX0_IN, + PTY7_IN, PTY6_IN, PTY5_IN, PTY4_IN, + PTY3_IN, PTY2_IN, PTY1_IN, PTY0_IN, + PTZ7_IN, PTZ6_IN, PTZ5_IN, PTZ4_IN, + PTZ3_IN, PTZ2_IN, PTZ1_IN, PTZ0_IN, + PINMUX_INPUT_END, + + PINMUX_INPUT_PULLUP_BEGIN, + PTA7_IN_PU, PTA6_IN_PU, PTA5_IN_PU, PTA4_IN_PU, + PTA3_IN_PU, PTA2_IN_PU, PTA1_IN_PU, PTA0_IN_PU, + PTB7_IN_PU, PTB6_IN_PU, PTB5_IN_PU, PTB4_IN_PU, + PTB3_IN_PU, PTB2_IN_PU, PTB1_IN_PU, PTB0_IN_PU, + PTC7_IN_PU, PTC6_IN_PU, PTC5_IN_PU, PTC4_IN_PU, + PTC3_IN_PU, PTC2_IN_PU, PTC1_IN_PU, PTC0_IN_PU, + PTD7_IN_PU, PTD6_IN_PU, PTD5_IN_PU, PTD4_IN_PU, + PTD3_IN_PU, PTD2_IN_PU, PTD1_IN_PU, PTD0_IN_PU, + PTE7_IN_PU, PTE6_IN_PU, PTE5_IN_PU, PTE4_IN_PU, + PTE3_IN_PU, PTE2_IN_PU, PTE1_IN_PU, PTE0_IN_PU, + PTF7_IN_PU, PTF6_IN_PU, PTF5_IN_PU, PTF4_IN_PU, + PTF3_IN_PU, PTF2_IN_PU, PTF1_IN_PU, PTF0_IN_PU, + PTH7_IN_PU, PTH6_IN_PU, PTH5_IN_PU, PTH4_IN_PU, + PTH3_IN_PU, PTH2_IN_PU, PTH1_IN_PU, PTH0_IN_PU, + PTJ3_IN_PU, PTJ2_IN_PU, PTJ1_IN_PU, PTJ0_IN_PU, + PTK7_IN_PU, PTK6_IN_PU, PTK5_IN_PU, PTK4_IN_PU, + PTK3_IN_PU, PTK2_IN_PU, PTK1_IN_PU, PTK0_IN_PU, + PTL7_IN_PU, PTL6_IN_PU, PTL5_IN_PU, PTL4_IN_PU, + PTL3_IN_PU, PTL2_IN_PU, PTL1_IN_PU, PTL0_IN_PU, + PTM7_IN_PU, PTM6_IN_PU, PTM5_IN_PU, PTM4_IN_PU, + PTM3_IN_PU, PTM2_IN_PU, PTM1_IN_PU, PTM0_IN_PU, + PTN7_IN_PU, PTN6_IN_PU, PTN5_IN_PU, PTN4_IN_PU, + PTN3_IN_PU, PTN2_IN_PU, PTN1_IN_PU, PTN0_IN_PU, + PTQ7_IN_PU, PTQ6_IN_PU, PTQ5_IN_PU, PTQ4_IN_PU, + PTQ3_IN_PU, PTQ2_IN_PU, PTQ1_IN_PU, PTQ0_IN_PU, + PTR7_IN_PU, PTR6_IN_PU, PTR5_IN_PU, PTR4_IN_PU, + PTR3_IN_PU, PTR2_IN_PU, PTR1_IN_PU, PTR0_IN_PU, + PTS6_IN_PU, PTS5_IN_PU, PTS4_IN_PU, + PTS3_IN_PU, PTS2_IN_PU, PTS1_IN_PU, PTS0_IN_PU, + PTT7_IN_PU, PTT6_IN_PU, PTT5_IN_PU, PTT4_IN_PU, + PTT3_IN_PU, PTT2_IN_PU, PTT1_IN_PU, PTT0_IN_PU, + PTU7_IN_PU, PTU6_IN_PU, PTU5_IN_PU, PTU4_IN_PU, + PTU3_IN_PU, PTU2_IN_PU, PTU1_IN_PU, PTU0_IN_PU, + PTV7_IN_PU, PTV6_IN_PU, PTV5_IN_PU, PTV4_IN_PU, + PTV3_IN_PU, PTV2_IN_PU, PTV1_IN_PU, PTV0_IN_PU, + PTW7_IN_PU, PTW6_IN_PU, PTW5_IN_PU, PTW4_IN_PU, + PTW3_IN_PU, PTW2_IN_PU, PTW1_IN_PU, PTW0_IN_PU, + PTX7_IN_PU, PTX6_IN_PU, PTX5_IN_PU, PTX4_IN_PU, + PTX3_IN_PU, PTX2_IN_PU, PTX1_IN_PU, PTX0_IN_PU, + PTY7_IN_PU, PTY6_IN_PU, PTY5_IN_PU, PTY4_IN_PU, + PTY3_IN_PU, PTY2_IN_PU, PTY1_IN_PU, PTY0_IN_PU, + PTZ7_IN_PU, PTZ6_IN_PU, PTZ5_IN_PU, PTZ4_IN_PU, + PTZ3_IN_PU, PTZ2_IN_PU, PTZ1_IN_PU, PTZ0_IN_PU, + PINMUX_INPUT_PULLUP_END, + + PINMUX_OUTPUT_BEGIN, + PTA7_OUT, PTA6_OUT, PTA5_OUT, PTA4_OUT, + PTA3_OUT, PTA2_OUT, PTA1_OUT, PTA0_OUT, + PTB7_OUT, PTB6_OUT, PTB5_OUT, PTB4_OUT, + PTB3_OUT, PTB2_OUT, PTB1_OUT, PTB0_OUT, + PTC7_OUT, PTC6_OUT, PTC5_OUT, PTC4_OUT, + PTC3_OUT, PTC2_OUT, PTC1_OUT, PTC0_OUT, + PTD7_OUT, PTD6_OUT, PTD5_OUT, PTD4_OUT, + PTD3_OUT, PTD2_OUT, PTD1_OUT, PTD0_OUT, + PTE7_OUT, PTE6_OUT, PTE5_OUT, PTE4_OUT, + PTE3_OUT, PTE2_OUT, PTE1_OUT, PTE0_OUT, + PTF7_OUT, PTF6_OUT, PTF5_OUT, PTF4_OUT, + PTF3_OUT, PTF2_OUT, PTF1_OUT, PTF0_OUT, + PTG5_OUT, PTG4_OUT, + PTG3_OUT, PTG2_OUT, PTG1_OUT, PTG0_OUT, + PTH7_OUT, PTH6_OUT, PTH5_OUT, PTH4_OUT, + PTH3_OUT, PTH2_OUT, PTH1_OUT, PTH0_OUT, + PTJ7_OUT, PTJ6_OUT, PTJ5_OUT, + PTJ3_OUT, PTJ2_OUT, PTJ1_OUT, PTJ0_OUT, + PTK7_OUT, PTK6_OUT, PTK5_OUT, PTK4_OUT, + PTK3_OUT, PTK2_OUT, PTK1_OUT, PTK0_OUT, + PTL7_OUT, PTL6_OUT, PTL5_OUT, PTL4_OUT, + PTL3_OUT, PTL2_OUT, PTL1_OUT, PTL0_OUT, + PTM7_OUT, PTM6_OUT, PTM5_OUT, PTM4_OUT, + PTM3_OUT, PTM2_OUT, PTM1_OUT, PTM0_OUT, + PTN7_OUT, PTN6_OUT, PTN5_OUT, PTN4_OUT, + PTN3_OUT, PTN2_OUT, PTN1_OUT, PTN0_OUT, + PTQ7_OUT, PTQ6_OUT, PTQ5_OUT, PTQ4_OUT, + PTQ3_OUT, PTQ2_OUT, PTQ1_OUT, PTQ0_OUT, + PTR7_OUT, PTR6_OUT, PTR5_OUT, PTR4_OUT, + PTR1_OUT, PTR0_OUT, + PTS6_OUT, PTS5_OUT, PTS4_OUT, + PTS3_OUT, PTS2_OUT, PTS1_OUT, PTS0_OUT, + PTT7_OUT, PTT6_OUT, PTT5_OUT, PTT4_OUT, + PTT3_OUT, PTT2_OUT, PTT1_OUT, PTT0_OUT, + PTU7_OUT, PTU6_OUT, PTU5_OUT, PTU4_OUT, + PTU3_OUT, PTU2_OUT, PTU1_OUT, PTU0_OUT, + PTV7_OUT, PTV6_OUT, PTV5_OUT, PTV4_OUT, + PTV3_OUT, PTV2_OUT, PTV1_OUT, PTV0_OUT, + PTW7_OUT, PTW6_OUT, PTW5_OUT, PTW4_OUT, + PTW3_OUT, PTW2_OUT, PTW1_OUT, PTW0_OUT, + PTX7_OUT, PTX6_OUT, PTX5_OUT, PTX4_OUT, + PTX3_OUT, PTX2_OUT, PTX1_OUT, PTX0_OUT, + PTY7_OUT, PTY6_OUT, PTY5_OUT, PTY4_OUT, + PTY3_OUT, PTY2_OUT, PTY1_OUT, PTY0_OUT, + PTZ7_OUT, PTZ6_OUT, PTZ5_OUT, PTZ4_OUT, + PTZ3_OUT, PTZ2_OUT, PTZ1_OUT, PTZ0_OUT, + PINMUX_OUTPUT_END, + + PINMUX_FUNCTION_BEGIN, + PTA7_FN, PTA6_FN, PTA5_FN, PTA4_FN, + PTA3_FN, PTA2_FN, PTA1_FN, PTA0_FN, + PTB7_FN, PTB6_FN, PTB5_FN, PTB4_FN, + PTB3_FN, PTB2_FN, PTB1_FN, PTB0_FN, + PTC7_FN, PTC6_FN, PTC5_FN, PTC4_FN, + PTC3_FN, PTC2_FN, PTC1_FN, PTC0_FN, + PTD7_FN, PTD6_FN, PTD5_FN, PTD4_FN, + PTD3_FN, PTD2_FN, PTD1_FN, PTD0_FN, + PTE7_FN, PTE6_FN, PTE5_FN, PTE4_FN, + PTE3_FN, PTE2_FN, PTE1_FN, PTE0_FN, + PTF7_FN, PTF6_FN, PTF5_FN, PTF4_FN, + PTF3_FN, PTF2_FN, PTF1_FN, PTF0_FN, + PTG5_FN, PTG4_FN, + PTG3_FN, PTG2_FN, PTG1_FN, PTG0_FN, + PTH7_FN, PTH6_FN, PTH5_FN, PTH4_FN, + PTH3_FN, PTH2_FN, PTH1_FN, PTH0_FN, + PTJ7_FN, PTJ6_FN, PTJ5_FN, + PTJ3_FN, PTJ2_FN, PTJ1_FN, PTJ0_FN, + PTK7_FN, PTK6_FN, PTK5_FN, PTK4_FN, + PTK3_FN, PTK2_FN, PTK1_FN, PTK0_FN, + PTL7_FN, PTL6_FN, PTL5_FN, PTL4_FN, + PTL3_FN, PTL2_FN, PTL1_FN, PTL0_FN, + PTM7_FN, PTM6_FN, PTM5_FN, PTM4_FN, + PTM3_FN, PTM2_FN, PTM1_FN, PTM0_FN, + PTN7_FN, PTN6_FN, PTN5_FN, PTN4_FN, + PTN3_FN, PTN2_FN, PTN1_FN, PTN0_FN, + PTQ7_FN, PTQ6_FN, PTQ5_FN, PTQ4_FN, + PTQ3_FN, PTQ2_FN, PTQ1_FN, PTQ0_FN, + PTR7_FN, PTR6_FN, PTR5_FN, PTR4_FN, + PTR3_FN, PTR2_FN, PTR1_FN, PTR0_FN, + PTS6_FN, PTS5_FN, PTS4_FN, + PTS3_FN, PTS2_FN, PTS1_FN, PTS0_FN, + PTT7_FN, PTT6_FN, PTT5_FN, PTT4_FN, + PTT3_FN, PTT2_FN, PTT1_FN, PTT0_FN, + PTU7_FN, PTU6_FN, PTU5_FN, PTU4_FN, + PTU3_FN, PTU2_FN, PTU1_FN, PTU0_FN, + PTV7_FN, PTV6_FN, PTV5_FN, PTV4_FN, + PTV3_FN, PTV2_FN, PTV1_FN, PTV0_FN, + PTW7_FN, PTW6_FN, PTW5_FN, PTW4_FN, + PTW3_FN, PTW2_FN, PTW1_FN, PTW0_FN, + PTX7_FN, PTX6_FN, PTX5_FN, PTX4_FN, + PTX3_FN, PTX2_FN, PTX1_FN, PTX0_FN, + PTY7_FN, PTY6_FN, PTY5_FN, PTY4_FN, + PTY3_FN, PTY2_FN, PTY1_FN, PTY0_FN, + PTZ7_FN, PTZ6_FN, PTZ5_FN, PTZ4_FN, + PTZ3_FN, PTZ2_FN, PTZ1_FN, PTZ0_FN, + + + PSA15_0, PSA15_1, + PSA14_0, PSA14_1, + PSA13_0, PSA13_1, + PSA12_0, PSA12_1, + PSA10_0, PSA10_1, + PSA9_0, PSA9_1, + PSA8_0, PSA8_1, + PSA7_0, PSA7_1, + PSA6_0, PSA6_1, + PSA5_0, PSA5_1, + PSA3_0, PSA3_1, + PSA2_0, PSA2_1, + PSA1_0, PSA1_1, + PSA0_0, PSA0_1, + + PSB14_0, PSB14_1, + PSB13_0, PSB13_1, + PSB12_0, PSB12_1, + PSB11_0, PSB11_1, + PSB10_0, PSB10_1, + PSB9_0, PSB9_1, + PSB8_0, PSB8_1, + PSB7_0, PSB7_1, + PSB6_0, PSB6_1, + PSB5_0, PSB5_1, + PSB4_0, PSB4_1, + PSB3_0, PSB3_1, + PSB2_0, PSB2_1, + PSB1_0, PSB1_1, + PSB0_0, PSB0_1, + + PSC15_0, PSC15_1, + PSC14_0, PSC14_1, + PSC13_0, PSC13_1, + PSC12_0, PSC12_1, + PSC11_0, PSC11_1, + PSC10_0, PSC10_1, + PSC9_0, PSC9_1, + PSC8_0, PSC8_1, + PSC7_0, PSC7_1, + PSC6_0, PSC6_1, + PSC5_0, PSC5_1, + PSC4_0, PSC4_1, + PSC2_0, PSC2_1, + PSC1_0, PSC1_1, + PSC0_0, PSC0_1, + + PSD15_0, PSD15_1, + PSD14_0, PSD14_1, + PSD13_0, PSD13_1, + PSD12_0, PSD12_1, + PSD11_0, PSD11_1, + PSD10_0, PSD10_1, + PSD9_0, PSD9_1, + PSD8_0, PSD8_1, + PSD7_0, PSD7_1, + PSD6_0, PSD6_1, + PSD5_0, PSD5_1, + PSD4_0, PSD4_1, + PSD3_0, PSD3_1, + PSD2_0, PSD2_1, + PSD1_0, PSD1_1, + PSD0_0, PSD0_1, + + PSE15_0, PSE15_1, + PSE14_0, PSE14_1, + PSE13_0, PSE13_1, + PSE12_0, PSE12_1, + PSE11_0, PSE11_1, + PSE10_0, PSE10_1, + PSE9_0, PSE9_1, + PSE8_0, PSE8_1, + PSE7_0, PSE7_1, + PSE6_0, PSE6_1, + PSE5_0, PSE5_1, + PSE4_0, PSE4_1, + PSE3_0, PSE3_1, + PSE2_0, PSE2_1, + PSE1_0, PSE1_1, + PSE0_0, PSE0_1, + PINMUX_FUNCTION_END, + + PINMUX_MARK_BEGIN, + /*PTA*/ + D23_MARK, KEYOUT2_MARK, IDED15_MARK, + D22_MARK, KEYOUT1_MARK, IDED14_MARK, + D21_MARK, KEYOUT0_MARK, IDED13_MARK, + D20_MARK, KEYIN4_MARK, IDED12_MARK, + D19_MARK, KEYIN3_MARK, IDED11_MARK, + D18_MARK, KEYIN2_MARK, IDED10_MARK, + D17_MARK, KEYIN1_MARK, IDED9_MARK, + D16_MARK, KEYIN0_MARK, IDED8_MARK, + + /*PTB*/ + D31_MARK, TPUTO1_MARK, IDEA1_MARK, + D30_MARK, TPUTO0_MARK, IDEA0_MARK, + D29_MARK, IODREQ_MARK, + D28_MARK, IDECS0_MARK, + D27_MARK, IDECS1_MARK, + D26_MARK, KEYOUT5_IN5_MARK, IDEIORD_MARK, + D25_MARK, KEYOUT4_IN6_MARK, IDEIOWR_MARK, + D24_MARK, KEYOUT3_MARK, IDEINT_MARK, + + /*PTC*/ + LCDD7_MARK, + LCDD6_MARK, + LCDD5_MARK, + LCDD4_MARK, + LCDD3_MARK, + LCDD2_MARK, + LCDD1_MARK, + LCDD0_MARK, + + /*PTD*/ + LCDD15_MARK, + LCDD14_MARK, + LCDD13_MARK, + LCDD12_MARK, + LCDD11_MARK, + LCDD10_MARK, + LCDD9_MARK, + LCDD8_MARK, + + /*PTE*/ + FSIMCKB_MARK, + FSIMCKA_MARK, + LCDD21_MARK, SCIF2_L_TXD_MARK, + LCDD20_MARK, SCIF4_SCK_MARK, + LCDD19_MARK, SCIF4_RXD_MARK, + LCDD18_MARK, SCIF4_TXD_MARK, + LCDD17_MARK, + LCDD16_MARK, + + /*PTF*/ + LCDVSYN_MARK, + LCDDISP_MARK, LCDRS_MARK, + LCDHSYN_MARK, LCDCS_MARK, + LCDDON_MARK, + LCDDCK_MARK, LCDWR_MARK, + LCDVEPWC_MARK, SCIF0_TXD_MARK, + LCDD23_MARK, SCIF2_L_SCK_MARK, + LCDD22_MARK, SCIF2_L_RXD_MARK, + + /*PTG*/ + AUDCK_MARK, + AUDSYNC_MARK, + AUDATA3_MARK, + AUDATA2_MARK, + AUDATA1_MARK, + AUDATA0_MARK, + + /*PTH*/ + VIO0_VD_MARK, + VIO0_CLK_MARK, + VIO0_D7_MARK, + VIO0_D6_MARK, + VIO0_D5_MARK, + VIO0_D4_MARK, + VIO0_D3_MARK, + VIO0_D2_MARK, + + /*PTJ*/ + PDSTATUS_MARK, + STATUS2_MARK, + STATUS0_MARK, + A25_MARK, BS_MARK, + A24_MARK, + A23_MARK, + A22_MARK, + + /*PTK*/ + VIO1_D5_MARK, VIO0_D13_MARK, IDED5_MARK, + VIO1_D4_MARK, VIO0_D12_MARK, IDED4_MARK, + VIO1_D3_MARK, VIO0_D11_MARK, IDED3_MARK, + VIO1_D2_MARK, VIO0_D10_MARK, IDED2_MARK, + VIO1_D1_MARK, VIO0_D9_MARK, IDED1_MARK, + VIO1_D0_MARK, VIO0_D8_MARK, IDED0_MARK, + VIO0_FLD_MARK, + VIO0_HD_MARK, + + /*PTL*/ + DV_D5_MARK, SCIF3_V_SCK_MARK, RMII_RXD0_MARK, + DV_D4_MARK, SCIF3_V_RXD_MARK, RMII_RXD1_MARK, + DV_D3_MARK, SCIF3_V_TXD_MARK, RMII_REF_CLK_MARK, + DV_D2_MARK, SCIF1_SCK_MARK, RMII_TX_EN_MARK, + DV_D1_MARK, SCIF1_RXD_MARK, RMII_TXD0_MARK, + DV_D0_MARK, SCIF1_TXD_MARK, RMII_TXD1_MARK, + DV_D15_MARK, + DV_D14_MARK, MSIOF0_MCK_MARK, + + /*PTM*/ + DV_D13_MARK, MSIOF0_TSCK_MARK, + DV_D12_MARK, MSIOF0_RXD_MARK, + DV_D11_MARK, MSIOF0_TXD_MARK, + DV_D10_MARK, MSIOF0_TSYNC_MARK, + DV_D9_MARK, MSIOF0_SS1_MARK, MSIOF0_RSCK_MARK, + DV_D8_MARK, MSIOF0_SS2_MARK, MSIOF0_RSYNC_MARK, + LCDVCPWC_MARK, SCIF0_RXD_MARK, + LCDRD_MARK, SCIF0_SCK_MARK, + + /*PTN*/ + VIO0_D1_MARK, + VIO0_D0_MARK, + DV_CLKI_MARK, + DV_CLK_MARK, SCIF2_V_SCK_MARK, + DV_VSYNC_MARK, SCIF2_V_RXD_MARK, + DV_HSYNC_MARK, SCIF2_V_TXD_MARK, + DV_D7_MARK, SCIF3_V_CTS_MARK, RMII_RX_ER_MARK, + DV_D6_MARK, SCIF3_V_RTS_MARK, RMII_CRS_DV_MARK, + + /*PTQ*/ + D7_MARK, + D6_MARK, + D5_MARK, + D4_MARK, + D3_MARK, + D2_MARK, + D1_MARK, + D0_MARK, + + /*PTR*/ + CS6B_CE1B_MARK, + CS6A_CE2B_MARK, + CS5B_CE1A_MARK, + CS5A_CE2A_MARK, + IOIS16_MARK, LCDLCLK_MARK, + WAIT_MARK, + WE3_ICIOWR_MARK, TPUTO3_MARK, TPUTI3_MARK, + WE2_ICIORD_MARK, TPUTO2_MARK, IDEA2_MARK, + + /*PTS*/ + VIO_CKO_MARK, + VIO1_FLD_MARK, TPUTI2_MARK, IDEIORDY_MARK, + VIO1_HD_MARK, SCIF5_SCK_MARK, + VIO1_VD_MARK, SCIF5_RXD_MARK, + VIO1_CLK_MARK, SCIF5_TXD_MARK, + VIO1_D7_MARK, VIO0_D15_MARK, IDED7_MARK, + VIO1_D6_MARK, VIO0_D14_MARK, IDED6_MARK, + + /*PTT*/ + D15_MARK, + D14_MARK, + D13_MARK, + D12_MARK, + D11_MARK, + D10_MARK, + D9_MARK, + D8_MARK, + + /*PTU*/ + DMAC_DACK0_MARK, + DMAC_DREQ0_MARK, + FSIOASD_MARK, + FSIIABCK_MARK, + FSIIALRCK_MARK, + FSIOABCK_MARK, + FSIOALRCK_MARK, + CLKAUDIOAO_MARK, + + /*PTV*/ + FSIIBSD_MARK, MSIOF1_SS2_MARK, MSIOF1_RSYNC_MARK, + FSIOBSD_MARK, MSIOF1_SS1_MARK, MSIOF1_RSCK_MARK, + FSIIBBCK_MARK, MSIOF1_RXD_MARK, + FSIIBLRCK_MARK, MSIOF1_TSYNC_MARK, + FSIOBBCK_MARK, MSIOF1_TSCK_MARK, + FSIOBLRCK_MARK, MSIOF1_TXD_MARK, + CLKAUDIOBO_MARK, MSIOF1_MCK_MARK, + FSIIASD_MARK, + + /*PTW*/ + MMC_D7_MARK, SDHI1CD_MARK, IODACK_MARK, + MMC_D6_MARK, SDHI1WP_MARK, IDERST_MARK, + MMC_D5_MARK, SDHI1D3_MARK, EXBUF_ENB_MARK, + MMC_D4_MARK, SDHI1D2_MARK, DIRECTION_MARK, + MMC_D3_MARK, SDHI1D1_MARK, + MMC_D2_MARK, SDHI1D0_MARK, + MMC_D1_MARK, SDHI1CMD_MARK, + MMC_D0_MARK, SDHI1CLK_MARK, + + /*PTX*/ + DMAC_DACK1_MARK, IRDA_OUT_MARK, + DMAC_DREQ1_MARK, IRDA_IN_MARK, + TSIF_TS0_SDAT_MARK, LNKSTA_MARK, + TSIF_TS0_SCK_MARK, MDIO_MARK, + TSIF_TS0_SDEN_MARK, MDC_MARK, + TSIF_TS0_SPSYNC_MARK, + MMC_CLK_MARK, + MMC_CMD_MARK, + + /*PTY*/ + SDHI0CD_MARK, + SDHI0WP_MARK, + SDHI0D3_MARK, + SDHI0D2_MARK, + SDHI0D1_MARK, + SDHI0D0_MARK, + SDHI0CMD_MARK, + SDHI0CLK_MARK, + + /*PTZ*/ + INTC_IRQ7_MARK, SCIF3_I_CTS_MARK, + INTC_IRQ6_MARK, SCIF3_I_RTS_MARK, + INTC_IRQ5_MARK, SCIF3_I_SCK_MARK, + INTC_IRQ4_MARK, SCIF3_I_RXD_MARK, + INTC_IRQ3_MARK, SCIF3_I_TXD_MARK, + INTC_IRQ2_MARK, + INTC_IRQ1_MARK, + INTC_IRQ0_MARK, + PINMUX_MARK_END, +}; + +static pinmux_enum_t pinmux_data[] = { + /* PTA GPIO */ + PINMUX_DATA(PTA7_DATA, PTA7_IN, PTA7_OUT, PTA7_IN_PU), + PINMUX_DATA(PTA6_DATA, PTA6_IN, PTA6_OUT, PTA6_IN_PU), + PINMUX_DATA(PTA5_DATA, PTA5_IN, PTA5_OUT, PTA5_IN_PU), + PINMUX_DATA(PTA4_DATA, PTA4_IN, PTA4_OUT, PTA4_IN_PU), + PINMUX_DATA(PTA3_DATA, PTA3_IN, PTA3_OUT, PTA3_IN_PU), + PINMUX_DATA(PTA2_DATA, PTA2_IN, PTA2_OUT, PTA2_IN_PU), + PINMUX_DATA(PTA1_DATA, PTA1_IN, PTA1_OUT, PTA1_IN_PU), + PINMUX_DATA(PTA0_DATA, PTA0_IN, PTA0_OUT, PTA0_IN_PU), + + /* PTB GPIO */ + PINMUX_DATA(PTB7_DATA, PTB7_IN, PTB7_OUT, PTB7_IN_PU), + PINMUX_DATA(PTB6_DATA, PTB6_IN, PTB6_OUT, PTB6_IN_PU), + PINMUX_DATA(PTB5_DATA, PTB5_IN, PTB5_OUT, PTB5_IN_PU), + PINMUX_DATA(PTB4_DATA, PTB4_IN, PTB4_OUT, PTB4_IN_PU), + PINMUX_DATA(PTB3_DATA, PTB3_IN, PTB3_OUT, PTB3_IN_PU), + PINMUX_DATA(PTB2_DATA, PTB2_IN, PTB2_OUT, PTB2_IN_PU), + PINMUX_DATA(PTB1_DATA, PTB1_IN, PTB1_OUT, PTB1_IN_PU), + PINMUX_DATA(PTB0_DATA, PTB0_IN, PTB0_OUT, PTB0_IN_PU), + + /* PTC GPIO */ + PINMUX_DATA(PTC7_DATA, PTC7_IN, PTC7_OUT, PTC7_IN_PU), + PINMUX_DATA(PTC6_DATA, PTC6_IN, PTC6_OUT, PTC6_IN_PU), + PINMUX_DATA(PTC5_DATA, PTC5_IN, PTC5_OUT, PTC5_IN_PU), + PINMUX_DATA(PTC4_DATA, PTC4_IN, PTC4_OUT, PTC4_IN_PU), + PINMUX_DATA(PTC3_DATA, PTC3_IN, PTC3_OUT, PTC3_IN_PU), + PINMUX_DATA(PTC2_DATA, PTC2_IN, PTC2_OUT, PTC2_IN_PU), + PINMUX_DATA(PTC1_DATA, PTC1_IN, PTC1_OUT, PTC1_IN_PU), + PINMUX_DATA(PTC0_DATA, PTC0_IN, PTC0_OUT, PTC0_IN_PU), + + /* PTD GPIO */ + PINMUX_DATA(PTD7_DATA, PTD7_IN, PTD7_OUT, PTD7_IN_PU), + PINMUX_DATA(PTD6_DATA, PTD6_IN, PTD6_OUT, PTD6_IN_PU), + PINMUX_DATA(PTD5_DATA, PTD5_IN, PTD5_OUT, PTD5_IN_PU), + PINMUX_DATA(PTD4_DATA, PTD4_IN, PTD4_OUT, PTD4_IN_PU), + PINMUX_DATA(PTD3_DATA, PTD3_IN, PTD3_OUT, PTD3_IN_PU), + PINMUX_DATA(PTD2_DATA, PTD2_IN, PTD2_OUT, PTD2_IN_PU), + PINMUX_DATA(PTD1_DATA, PTD1_IN, PTD1_OUT, PTD1_IN_PU), + PINMUX_DATA(PTD0_DATA, PTD0_IN, PTD0_OUT, PTD0_IN_PU), + + /* PTE GPIO */ + PINMUX_DATA(PTE7_DATA, PTE7_IN, PTE7_OUT, PTE7_IN_PU), + PINMUX_DATA(PTE6_DATA, PTE6_IN, PTE6_OUT, PTE6_IN_PU), + PINMUX_DATA(PTE5_DATA, PTE5_IN, PTE5_OUT, PTE5_IN_PU), + PINMUX_DATA(PTE4_DATA, PTE4_IN, PTE4_OUT, PTE4_IN_PU), + PINMUX_DATA(PTE3_DATA, PTE3_IN, PTE3_OUT, PTE3_IN_PU), + PINMUX_DATA(PTE2_DATA, PTE2_IN, PTE2_OUT, PTE2_IN_PU), + PINMUX_DATA(PTE1_DATA, PTE1_IN, PTE1_OUT, PTE1_IN_PU), + PINMUX_DATA(PTE0_DATA, PTE0_IN, PTE0_OUT, PTE0_IN_PU), + + /* PTF GPIO */ + PINMUX_DATA(PTF7_DATA, PTF7_IN, PTF7_OUT, PTF7_IN_PU), + PINMUX_DATA(PTF6_DATA, PTF6_IN, PTF6_OUT, PTF6_IN_PU), + PINMUX_DATA(PTF5_DATA, PTF5_IN, PTF5_OUT, PTF5_IN_PU), + PINMUX_DATA(PTF4_DATA, PTF4_IN, PTF4_OUT, PTF4_IN_PU), + PINMUX_DATA(PTF3_DATA, PTF3_IN, PTF3_OUT, PTF3_IN_PU), + PINMUX_DATA(PTF2_DATA, PTF2_IN, PTF2_OUT, PTF2_IN_PU), + PINMUX_DATA(PTF1_DATA, PTF1_IN, PTF1_OUT, PTF1_IN_PU), + PINMUX_DATA(PTF0_DATA, PTF0_IN, PTF0_OUT, PTF0_IN_PU), + + /* PTG GPIO */ + PINMUX_DATA(PTG5_DATA, PTG5_OUT), + PINMUX_DATA(PTG4_DATA, PTG4_OUT), + PINMUX_DATA(PTG3_DATA, PTG3_OUT), + PINMUX_DATA(PTG2_DATA, PTG2_OUT), + PINMUX_DATA(PTG1_DATA, PTG1_OUT), + PINMUX_DATA(PTG0_DATA, PTG0_OUT), + + /* PTH GPIO */ + PINMUX_DATA(PTH7_DATA, PTH7_IN, PTH7_OUT, PTH7_IN_PU), + PINMUX_DATA(PTH6_DATA, PTH6_IN, PTH6_OUT, PTH6_IN_PU), + PINMUX_DATA(PTH5_DATA, PTH5_IN, PTH5_OUT, PTH5_IN_PU), + PINMUX_DATA(PTH4_DATA, PTH4_IN, PTH4_OUT, PTH4_IN_PU), + PINMUX_DATA(PTH3_DATA, PTH3_IN, PTH3_OUT, PTH3_IN_PU), + PINMUX_DATA(PTH2_DATA, PTH2_IN, PTH2_OUT, PTH2_IN_PU), + PINMUX_DATA(PTH1_DATA, PTH1_IN, PTH1_OUT, PTH1_IN_PU), + PINMUX_DATA(PTH0_DATA, PTH0_IN, PTH0_OUT, PTH0_IN_PU), + + /* PTJ GPIO */ + PINMUX_DATA(PTJ7_DATA, PTJ7_OUT), + PINMUX_DATA(PTJ6_DATA, PTJ6_OUT), + PINMUX_DATA(PTJ5_DATA, PTJ5_OUT), + PINMUX_DATA(PTJ3_DATA, PTJ3_IN, PTJ3_OUT, PTJ3_IN_PU), + PINMUX_DATA(PTJ2_DATA, PTJ2_IN, PTJ2_OUT, PTJ2_IN_PU), + PINMUX_DATA(PTJ1_DATA, PTJ1_IN, PTJ1_OUT, PTJ1_IN_PU), + PINMUX_DATA(PTJ0_DATA, PTJ0_IN, PTJ0_OUT, PTJ0_IN_PU), + + /* PTK GPIO */ + PINMUX_DATA(PTK7_DATA, PTK7_IN, PTK7_OUT, PTK7_IN_PU), + PINMUX_DATA(PTK6_DATA, PTK6_IN, PTK6_OUT, PTK6_IN_PU), + PINMUX_DATA(PTK5_DATA, PTK5_IN, PTK5_OUT, PTK5_IN_PU), + PINMUX_DATA(PTK4_DATA, PTK4_IN, PTK4_OUT, PTK4_IN_PU), + PINMUX_DATA(PTK3_DATA, PTK3_IN, PTK3_OUT, PTK3_IN_PU), + PINMUX_DATA(PTK2_DATA, PTK2_IN, PTK2_OUT, PTK2_IN_PU), + PINMUX_DATA(PTK1_DATA, PTK1_IN, PTK1_OUT, PTK1_IN_PU), + PINMUX_DATA(PTK0_DATA, PTK0_IN, PTK0_OUT, PTK0_IN_PU), + + /* PTL GPIO */ + PINMUX_DATA(PTL7_DATA, PTL7_IN, PTL7_OUT, PTL7_IN_PU), + PINMUX_DATA(PTL6_DATA, PTL6_IN, PTL6_OUT, PTL6_IN_PU), + PINMUX_DATA(PTL5_DATA, PTL5_IN, PTL5_OUT, PTL5_IN_PU), + PINMUX_DATA(PTL4_DATA, PTL4_IN, PTL4_OUT, PTL4_IN_PU), + PINMUX_DATA(PTL3_DATA, PTL3_IN, PTL3_OUT, PTL3_IN_PU), + PINMUX_DATA(PTL2_DATA, PTL2_IN, PTL2_OUT, PTL2_IN_PU), + PINMUX_DATA(PTL1_DATA, PTL1_IN, PTL1_OUT, PTL1_IN_PU), + PINMUX_DATA(PTL0_DATA, PTL0_IN, PTL0_OUT, PTL0_IN_PU), + + /* PTM GPIO */ + PINMUX_DATA(PTM7_DATA, PTM7_IN, PTM7_OUT, PTM7_IN_PU), + PINMUX_DATA(PTM6_DATA, PTM6_IN, PTM6_OUT, PTM6_IN_PU), + PINMUX_DATA(PTM5_DATA, PTM5_IN, PTM5_OUT, PTM5_IN_PU), + PINMUX_DATA(PTM4_DATA, PTM4_IN, PTM4_OUT, PTM4_IN_PU), + PINMUX_DATA(PTM3_DATA, PTM3_IN, PTM3_OUT, PTM3_IN_PU), + PINMUX_DATA(PTM2_DATA, PTM2_IN, PTM2_OUT, PTM2_IN_PU), + PINMUX_DATA(PTM1_DATA, PTM1_IN, PTM1_OUT, PTM1_IN_PU), + PINMUX_DATA(PTM0_DATA, PTM0_IN, PTM0_OUT, PTM0_IN_PU), + + /* PTN GPIO */ + PINMUX_DATA(PTN7_DATA, PTN7_IN, PTN7_OUT, PTN7_IN_PU), + PINMUX_DATA(PTN6_DATA, PTN6_IN, PTN6_OUT, PTN6_IN_PU), + PINMUX_DATA(PTN5_DATA, PTN5_IN, PTN5_OUT, PTN5_IN_PU), + PINMUX_DATA(PTN4_DATA, PTN4_IN, PTN4_OUT, PTN4_IN_PU), + PINMUX_DATA(PTN3_DATA, PTN3_IN, PTN3_OUT, PTN3_IN_PU), + PINMUX_DATA(PTN2_DATA, PTN2_IN, PTN2_OUT, PTN2_IN_PU), + PINMUX_DATA(PTN1_DATA, PTN1_IN, PTN1_OUT, PTN1_IN_PU), + PINMUX_DATA(PTN0_DATA, PTN0_IN, PTN0_OUT, PTN0_IN_PU), + + /* PTQ GPIO */ + PINMUX_DATA(PTQ7_DATA, PTQ7_IN, PTQ7_OUT, PTQ7_IN_PU), + PINMUX_DATA(PTQ6_DATA, PTQ6_IN, PTQ6_OUT, PTQ6_IN_PU), + PINMUX_DATA(PTQ5_DATA, PTQ5_IN, PTQ5_OUT, PTQ5_IN_PU), + PINMUX_DATA(PTQ4_DATA, PTQ4_IN, PTQ4_OUT, PTQ4_IN_PU), + PINMUX_DATA(PTQ3_DATA, PTQ3_IN, PTQ3_OUT, PTQ3_IN_PU), + PINMUX_DATA(PTQ2_DATA, PTQ2_IN, PTQ2_OUT, PTQ2_IN_PU), + PINMUX_DATA(PTQ1_DATA, PTQ1_IN, PTQ1_OUT, PTQ1_IN_PU), + PINMUX_DATA(PTQ0_DATA, PTQ0_IN, PTQ0_OUT, PTQ0_IN_PU), + + /* PTR GPIO */ + PINMUX_DATA(PTR7_DATA, PTR7_IN, PTR7_OUT, PTR7_IN_PU), + PINMUX_DATA(PTR6_DATA, PTR6_IN, PTR6_OUT, PTR6_IN_PU), + PINMUX_DATA(PTR5_DATA, PTR5_IN, PTR5_OUT, PTR5_IN_PU), + PINMUX_DATA(PTR4_DATA, PTR4_IN, PTR4_OUT, PTR4_IN_PU), + PINMUX_DATA(PTR3_DATA, PTR3_IN, PTR3_IN_PU), + PINMUX_DATA(PTR2_DATA, PTR2_IN, PTR2_IN_PU), + PINMUX_DATA(PTR1_DATA, PTR1_IN, PTR1_OUT, PTR1_IN_PU), + PINMUX_DATA(PTR0_DATA, PTR0_IN, PTR0_OUT, PTR0_IN_PU), + + /* PTS GPIO */ + PINMUX_DATA(PTS6_DATA, PTS6_IN, PTS6_OUT, PTS6_IN_PU), + PINMUX_DATA(PTS5_DATA, PTS5_IN, PTS5_OUT, PTS5_IN_PU), + PINMUX_DATA(PTS4_DATA, PTS4_IN, PTS4_OUT, PTS4_IN_PU), + PINMUX_DATA(PTS3_DATA, PTS3_IN, PTS3_OUT, PTS3_IN_PU), + PINMUX_DATA(PTS2_DATA, PTS2_IN, PTS2_OUT, PTS2_IN_PU), + PINMUX_DATA(PTS1_DATA, PTS1_IN, PTS1_OUT, PTS1_IN_PU), + PINMUX_DATA(PTS0_DATA, PTS0_IN, PTS0_OUT, PTS0_IN_PU), + + /* PTT GPIO */ + PINMUX_DATA(PTT7_DATA, PTT7_IN, PTT7_OUT, PTT7_IN_PU), + PINMUX_DATA(PTT6_DATA, PTT6_IN, PTT6_OUT, PTT6_IN_PU), + PINMUX_DATA(PTT5_DATA, PTT5_IN, PTT5_OUT, PTT5_IN_PU), + PINMUX_DATA(PTT4_DATA, PTT4_IN, PTT4_OUT, PTT4_IN_PU), + PINMUX_DATA(PTT3_DATA, PTT3_IN, PTT3_OUT, PTT3_IN_PU), + PINMUX_DATA(PTT2_DATA, PTT2_IN, PTT2_OUT, PTT2_IN_PU), + PINMUX_DATA(PTT1_DATA, PTT1_IN, PTT1_OUT, PTT1_IN_PU), + PINMUX_DATA(PTT0_DATA, PTT0_IN, PTT0_OUT, PTT0_IN_PU), + + /* PTU GPIO */ + PINMUX_DATA(PTU7_DATA, PTU7_IN, PTU7_OUT, PTU7_IN_PU), + PINMUX_DATA(PTU6_DATA, PTU6_IN, PTU6_OUT, PTU6_IN_PU), + PINMUX_DATA(PTU5_DATA, PTU5_IN, PTU5_OUT, PTU5_IN_PU), + PINMUX_DATA(PTU4_DATA, PTU4_IN, PTU4_OUT, PTU4_IN_PU), + PINMUX_DATA(PTU3_DATA, PTU3_IN, PTU3_OUT, PTU3_IN_PU), + PINMUX_DATA(PTU2_DATA, PTU2_IN, PTU2_OUT, PTU2_IN_PU), + PINMUX_DATA(PTU1_DATA, PTU1_IN, PTU1_OUT, PTU1_IN_PU), + PINMUX_DATA(PTU0_DATA, PTU0_IN, PTU0_OUT, PTU0_IN_PU), + + /* PTV GPIO */ + PINMUX_DATA(PTV7_DATA, PTV7_IN, PTV7_OUT, PTV7_IN_PU), + PINMUX_DATA(PTV6_DATA, PTV6_IN, PTV6_OUT, PTV6_IN_PU), + PINMUX_DATA(PTV5_DATA, PTV5_IN, PTV5_OUT, PTV5_IN_PU), + PINMUX_DATA(PTV4_DATA, PTV4_IN, PTV4_OUT, PTV4_IN_PU), + PINMUX_DATA(PTV3_DATA, PTV3_IN, PTV3_OUT, PTV3_IN_PU), + PINMUX_DATA(PTV2_DATA, PTV2_IN, PTV2_OUT, PTV2_IN_PU), + PINMUX_DATA(PTV1_DATA, PTV1_IN, PTV1_OUT, PTV1_IN_PU), + PINMUX_DATA(PTV0_DATA, PTV0_IN, PTV0_OUT, PTV0_IN_PU), + + /* PTW GPIO */ + PINMUX_DATA(PTW7_DATA, PTW7_IN, PTW7_OUT, PTW7_IN_PU), + PINMUX_DATA(PTW6_DATA, PTW6_IN, PTW6_OUT, PTW6_IN_PU), + PINMUX_DATA(PTW5_DATA, PTW5_IN, PTW5_OUT, PTW5_IN_PU), + PINMUX_DATA(PTW4_DATA, PTW4_IN, PTW4_OUT, PTW4_IN_PU), + PINMUX_DATA(PTW3_DATA, PTW3_IN, PTW3_OUT, PTW3_IN_PU), + PINMUX_DATA(PTW2_DATA, PTW2_IN, PTW2_OUT, PTW2_IN_PU), + PINMUX_DATA(PTW1_DATA, PTW1_IN, PTW1_OUT, PTW1_IN_PU), + PINMUX_DATA(PTW0_DATA, PTW0_IN, PTW0_OUT, PTW0_IN_PU), + + /* PTX GPIO */ + PINMUX_DATA(PTX7_DATA, PTX7_IN, PTX7_OUT, PTX7_IN_PU), + PINMUX_DATA(PTX6_DATA, PTX6_IN, PTX6_OUT, PTX6_IN_PU), + PINMUX_DATA(PTX5_DATA, PTX5_IN, PTX5_OUT, PTX5_IN_PU), + PINMUX_DATA(PTX4_DATA, PTX4_IN, PTX4_OUT, PTX4_IN_PU), + PINMUX_DATA(PTX3_DATA, PTX3_IN, PTX3_OUT, PTX3_IN_PU), + PINMUX_DATA(PTX2_DATA, PTX2_IN, PTX2_OUT, PTX2_IN_PU), + PINMUX_DATA(PTX1_DATA, PTX1_IN, PTX1_OUT, PTX1_IN_PU), + PINMUX_DATA(PTX0_DATA, PTX0_IN, PTX0_OUT, PTX0_IN_PU), + + /* PTY GPIO */ + PINMUX_DATA(PTY7_DATA, PTY7_IN, PTY7_OUT, PTY7_IN_PU), + PINMUX_DATA(PTY6_DATA, PTY6_IN, PTY6_OUT, PTY6_IN_PU), + PINMUX_DATA(PTY5_DATA, PTY5_IN, PTY5_OUT, PTY5_IN_PU), + PINMUX_DATA(PTY4_DATA, PTY4_IN, PTY4_OUT, PTY4_IN_PU), + PINMUX_DATA(PTY3_DATA, PTY3_IN, PTY3_OUT, PTY3_IN_PU), + PINMUX_DATA(PTY2_DATA, PTY2_IN, PTY2_OUT, PTY2_IN_PU), + PINMUX_DATA(PTY1_DATA, PTY1_IN, PTY1_OUT, PTY1_IN_PU), + PINMUX_DATA(PTY0_DATA, PTY0_IN, PTY0_OUT, PTY0_IN_PU), + + /* PTZ GPIO */ + PINMUX_DATA(PTZ7_DATA, PTZ7_IN, PTZ7_OUT, PTZ7_IN_PU), + PINMUX_DATA(PTZ6_DATA, PTZ6_IN, PTZ6_OUT, PTZ6_IN_PU), + PINMUX_DATA(PTZ5_DATA, PTZ5_IN, PTZ5_OUT, PTZ5_IN_PU), + PINMUX_DATA(PTZ4_DATA, PTZ4_IN, PTZ4_OUT, PTZ4_IN_PU), + PINMUX_DATA(PTZ3_DATA, PTZ3_IN, PTZ3_OUT, PTZ3_IN_PU), + PINMUX_DATA(PTZ2_DATA, PTZ2_IN, PTZ2_OUT, PTZ2_IN_PU), + PINMUX_DATA(PTZ1_DATA, PTZ1_IN, PTZ1_OUT, PTZ1_IN_PU), + PINMUX_DATA(PTZ0_DATA, PTZ0_IN, PTZ0_OUT, PTZ0_IN_PU), + + /* PTA FN */ + PINMUX_DATA(D23_MARK, PSA15_0, PSA14_0, PTA7_FN), + PINMUX_DATA(D22_MARK, PSA15_0, PSA14_0, PTA6_FN), + PINMUX_DATA(D21_MARK, PSA15_0, PSA14_0, PTA5_FN), + PINMUX_DATA(D20_MARK, PSA15_0, PSA14_0, PTA4_FN), + PINMUX_DATA(D19_MARK, PSA15_0, PSA14_0, PTA3_FN), + PINMUX_DATA(D18_MARK, PSA15_0, PSA14_0, PTA2_FN), + PINMUX_DATA(D17_MARK, PSA15_0, PSA14_0, PTA1_FN), + PINMUX_DATA(D16_MARK, PSA15_0, PSA14_0, PTA0_FN), + + PINMUX_DATA(KEYOUT2_MARK, PSA15_0, PSA14_1, PTA7_FN), + PINMUX_DATA(KEYOUT1_MARK, PSA15_0, PSA14_1, PTA6_FN), + PINMUX_DATA(KEYOUT0_MARK, PSA15_0, PSA14_1, PTA5_FN), + PINMUX_DATA(KEYIN4_MARK, PSA15_0, PSA14_1, PTA4_FN), + PINMUX_DATA(KEYIN3_MARK, PSA15_0, PSA14_1, PTA3_FN), + PINMUX_DATA(KEYIN2_MARK, PSA15_0, PSA14_1, PTA2_FN), + PINMUX_DATA(KEYIN1_MARK, PSA15_0, PSA14_1, PTA1_FN), + PINMUX_DATA(KEYIN0_MARK, PSA15_0, PSA14_1, PTA0_FN), + + PINMUX_DATA(IDED15_MARK, PSA15_1, PSA14_0, PTA7_FN), + PINMUX_DATA(IDED14_MARK, PSA15_1, PSA14_0, PTA6_FN), + PINMUX_DATA(IDED13_MARK, PSA15_1, PSA14_0, PTA5_FN), + PINMUX_DATA(IDED12_MARK, PSA15_1, PSA14_0, PTA4_FN), + PINMUX_DATA(IDED11_MARK, PSA15_1, PSA14_0, PTA3_FN), + PINMUX_DATA(IDED10_MARK, PSA15_1, PSA14_0, PTA2_FN), + PINMUX_DATA(IDED9_MARK, PSA15_1, PSA14_0, PTA1_FN), + PINMUX_DATA(IDED8_MARK, PSA15_1, PSA14_0, PTA0_FN), + + /* PTB FN */ + PINMUX_DATA(D31_MARK, PSE15_0, PSE14_0, PTB7_FN), + PINMUX_DATA(D30_MARK, PSE15_0, PSE14_0, PTB6_FN), + PINMUX_DATA(D29_MARK, PSE11_0, PTB5_FN), + PINMUX_DATA(D28_MARK, PSE11_0, PTB4_FN), + PINMUX_DATA(D27_MARK, PSE11_0, PTB3_FN), + PINMUX_DATA(D26_MARK, PSA15_0, PSA14_0, PTB2_FN), + PINMUX_DATA(D25_MARK, PSA15_0, PSA14_0, PTB1_FN), + PINMUX_DATA(D24_MARK, PSA15_0, PSA14_0, PTB0_FN), + + PINMUX_DATA(IDEA1_MARK, PSE15_1, PSE14_0, PTB7_FN), + PINMUX_DATA(IDEA0_MARK, PSE15_1, PSE14_0, PTB6_FN), + PINMUX_DATA(IODREQ_MARK, PSE11_1, PTB5_FN), + PINMUX_DATA(IDECS0_MARK, PSE11_1, PTB4_FN), + PINMUX_DATA(IDECS1_MARK, PSE11_1, PTB3_FN), + PINMUX_DATA(IDEIORD_MARK, PSA15_1, PSA14_0, PTB2_FN), + PINMUX_DATA(IDEIOWR_MARK, PSA15_1, PSA14_0, PTB1_FN), + PINMUX_DATA(IDEINT_MARK, PSA15_1, PSA14_0, PTB0_FN), + + PINMUX_DATA(TPUTO1_MARK, PSE15_0, PSE14_1, PTB7_FN), + PINMUX_DATA(TPUTO0_MARK, PSE15_0, PSE14_1, PTB6_FN), + + PINMUX_DATA(KEYOUT5_IN5_MARK, PSA15_0, PSA14_1, PTB2_FN), + PINMUX_DATA(KEYOUT4_IN6_MARK, PSA15_0, PSA14_1, PTB1_FN), + PINMUX_DATA(KEYOUT3_MARK, PSA15_0, PSA14_1, PTB0_FN), + + /* PTC FN */ + PINMUX_DATA(LCDD7_MARK, PSD5_0, PTC7_FN), + PINMUX_DATA(LCDD6_MARK, PSD5_0, PTC6_FN), + PINMUX_DATA(LCDD5_MARK, PSD5_0, PTC5_FN), + PINMUX_DATA(LCDD4_MARK, PSD5_0, PTC4_FN), + PINMUX_DATA(LCDD3_MARK, PSD5_0, PTC3_FN), + PINMUX_DATA(LCDD2_MARK, PSD5_0, PTC2_FN), + PINMUX_DATA(LCDD1_MARK, PSD5_0, PTC1_FN), + PINMUX_DATA(LCDD0_MARK, PSD5_0, PTC0_FN), + + /* PTD FN */ + PINMUX_DATA(LCDD15_MARK, PSD5_0, PTD7_FN), + PINMUX_DATA(LCDD14_MARK, PSD5_0, PTD6_FN), + PINMUX_DATA(LCDD13_MARK, PSD5_0, PTD5_FN), + PINMUX_DATA(LCDD12_MARK, PSD5_0, PTD4_FN), + PINMUX_DATA(LCDD11_MARK, PSD5_0, PTD3_FN), + PINMUX_DATA(LCDD10_MARK, PSD5_0, PTD2_FN), + PINMUX_DATA(LCDD9_MARK, PSD5_0, PTD1_FN), + PINMUX_DATA(LCDD8_MARK, PSD5_0, PTD0_FN), + + /* PTE FN */ + PINMUX_DATA(FSIMCKB_MARK, PTE7_FN), + PINMUX_DATA(FSIMCKA_MARK, PTE6_FN), + + PINMUX_DATA(LCDD21_MARK, PSC5_0, PSC4_0, PTE5_FN), + PINMUX_DATA(LCDD20_MARK, PSD3_0, PSD2_0, PTE4_FN), + PINMUX_DATA(LCDD19_MARK, PSA3_0, PSA2_0, PTE3_FN), + PINMUX_DATA(LCDD18_MARK, PSA3_0, PSA2_0, PTE2_FN), + PINMUX_DATA(LCDD17_MARK, PSD5_0, PTE1_FN), + PINMUX_DATA(LCDD16_MARK, PSD5_0, PTE0_FN), + + PINMUX_DATA(SCIF2_L_TXD_MARK, PSC5_0, PSC4_1, PTE5_FN), + PINMUX_DATA(SCIF4_SCK_MARK, PSD3_0, PSD2_1, PTE4_FN), + PINMUX_DATA(SCIF4_RXD_MARK, PSA3_0, PSA2_1, PTE3_FN), + PINMUX_DATA(SCIF4_TXD_MARK, PSA3_0, PSA2_1, PTE2_FN), + + /* PTF FN */ + PINMUX_DATA(LCDVSYN_MARK, PSD8_0, PTF7_FN), + PINMUX_DATA(LCDDISP_MARK, PSD10_0, PSD9_0, PTF6_FN), + PINMUX_DATA(LCDHSYN_MARK, PSD10_0, PSD9_0, PTF5_FN), + PINMUX_DATA(LCDDON_MARK, PSD8_0, PTF4_FN), + PINMUX_DATA(LCDDCK_MARK, PSD10_0, PSD9_0, PTF3_FN), + PINMUX_DATA(LCDVEPWC_MARK, PSA6_0, PTF2_FN), + PINMUX_DATA(LCDD23_MARK, PSC7_0, PSC6_0, PTF1_FN), + PINMUX_DATA(LCDD22_MARK, PSC5_0, PSC4_0, PTF0_FN), + + PINMUX_DATA(LCDRS_MARK, PSD10_0, PSD9_1, PTF6_FN), + PINMUX_DATA(LCDCS_MARK, PSD10_0, PSD9_1, PTF5_FN), + PINMUX_DATA(LCDWR_MARK, PSD10_0, PSD9_1, PTF3_FN), + + PINMUX_DATA(SCIF0_TXD_MARK, PSA6_1, PTF2_FN), + PINMUX_DATA(SCIF2_L_SCK_MARK, PSC7_0, PSC6_1, PTF1_FN), + PINMUX_DATA(SCIF2_L_RXD_MARK, PSC5_0, PSC4_1, PTF0_FN), + + /* PTG FN */ + PINMUX_DATA(AUDCK_MARK, PTG5_FN), + PINMUX_DATA(AUDSYNC_MARK, PTG4_FN), + PINMUX_DATA(AUDATA3_MARK, PTG3_FN), + PINMUX_DATA(AUDATA2_MARK, PTG2_FN), + PINMUX_DATA(AUDATA1_MARK, PTG1_FN), + PINMUX_DATA(AUDATA0_MARK, PTG0_FN), + + /* PTH FN */ + PINMUX_DATA(VIO0_VD_MARK, PTH7_FN), + PINMUX_DATA(VIO0_CLK_MARK, PTH6_FN), + PINMUX_DATA(VIO0_D7_MARK, PTH5_FN), + PINMUX_DATA(VIO0_D6_MARK, PTH4_FN), + PINMUX_DATA(VIO0_D5_MARK, PTH3_FN), + PINMUX_DATA(VIO0_D4_MARK, PTH2_FN), + PINMUX_DATA(VIO0_D3_MARK, PTH1_FN), + PINMUX_DATA(VIO0_D2_MARK, PTH0_FN), + + /* PTJ FN */ + PINMUX_DATA(PDSTATUS_MARK, PTJ7_FN), + PINMUX_DATA(STATUS2_MARK, PTJ6_FN), + PINMUX_DATA(STATUS0_MARK, PTJ5_FN), + PINMUX_DATA(A25_MARK, PSA8_0, PTJ3_FN), + PINMUX_DATA(BS_MARK, PSA8_1, PTJ3_FN), + PINMUX_DATA(A24_MARK, PTJ2_FN), + PINMUX_DATA(A23_MARK, PTJ1_FN), + PINMUX_DATA(A22_MARK, PTJ0_FN), + + /* PTK FN */ + PINMUX_DATA(VIO1_D5_MARK, PSB7_0, PSB6_0, PTK7_FN), + PINMUX_DATA(VIO1_D4_MARK, PSB7_0, PSB6_0, PTK6_FN), + PINMUX_DATA(VIO1_D3_MARK, PSB7_0, PSB6_0, PTK5_FN), + PINMUX_DATA(VIO1_D2_MARK, PSB7_0, PSB6_0, PTK4_FN), + PINMUX_DATA(VIO1_D1_MARK, PSB7_0, PSB6_0, PTK3_FN), + PINMUX_DATA(VIO1_D0_MARK, PSB7_0, PSB6_0, PTK2_FN), + + PINMUX_DATA(VIO0_D13_MARK, PSB7_0, PSB6_1, PTK7_FN), + PINMUX_DATA(VIO0_D12_MARK, PSB7_0, PSB6_1, PTK6_FN), + PINMUX_DATA(VIO0_D11_MARK, PSB7_0, PSB6_1, PTK5_FN), + PINMUX_DATA(VIO0_D10_MARK, PSB7_0, PSB6_1, PTK4_FN), + PINMUX_DATA(VIO0_D9_MARK, PSB7_0, PSB6_1, PTK3_FN), + PINMUX_DATA(VIO0_D8_MARK, PSB7_0, PSB6_1, PTK2_FN), + + PINMUX_DATA(IDED5_MARK, PSB7_1, PSB6_0, PTK7_FN), + PINMUX_DATA(IDED4_MARK, PSB7_1, PSB6_0, PTK6_FN), + PINMUX_DATA(IDED3_MARK, PSB7_1, PSB6_0, PTK5_FN), + PINMUX_DATA(IDED2_MARK, PSB7_1, PSB6_0, PTK4_FN), + PINMUX_DATA(IDED1_MARK, PSB7_1, PSB6_0, PTK3_FN), + PINMUX_DATA(IDED0_MARK, PSB7_1, PSB6_0, PTK2_FN), + + PINMUX_DATA(VIO0_FLD_MARK, PTK1_FN), + PINMUX_DATA(VIO0_HD_MARK, PTK0_FN), + + /* PTL FN */ + PINMUX_DATA(DV_D5_MARK, PSB9_0, PSB8_0, PTL7_FN), + PINMUX_DATA(DV_D4_MARK, PSB9_0, PSB8_0, PTL6_FN), + PINMUX_DATA(DV_D3_MARK, PSE7_0, PSE6_0, PTL5_FN), + PINMUX_DATA(DV_D2_MARK, PSC9_0, PSC8_0, PTL4_FN), + PINMUX_DATA(DV_D1_MARK, PSC9_0, PSC8_0, PTL3_FN), + PINMUX_DATA(DV_D0_MARK, PSC9_0, PSC8_0, PTL2_FN), + PINMUX_DATA(DV_D15_MARK, PSD4_0, PTL1_FN), + PINMUX_DATA(DV_D14_MARK, PSE5_0, PSE4_0, PTL0_FN), + + PINMUX_DATA(SCIF3_V_SCK_MARK, PSB9_0, PSB8_1, PTL7_FN), + PINMUX_DATA(SCIF3_V_RXD_MARK, PSB9_0, PSB8_1, PTL6_FN), + PINMUX_DATA(SCIF3_V_TXD_MARK, PSE7_0, PSE6_1, PTL5_FN), + PINMUX_DATA(SCIF1_SCK_MARK, PSC9_0, PSC8_1, PTL4_FN), + PINMUX_DATA(SCIF1_RXD_MARK, PSC9_0, PSC8_1, PTL3_FN), + PINMUX_DATA(SCIF1_TXD_MARK, PSC9_0, PSC8_1, PTL2_FN), + + PINMUX_DATA(RMII_RXD0_MARK, PSB9_1, PSB8_0, PTL7_FN), + PINMUX_DATA(RMII_RXD1_MARK, PSB9_1, PSB8_0, PTL6_FN), + PINMUX_DATA(RMII_REF_CLK_MARK, PSE7_1, PSE6_0, PTL5_FN), + PINMUX_DATA(RMII_TX_EN_MARK, PSC9_1, PSC8_0, PTL4_FN), + PINMUX_DATA(RMII_TXD0_MARK, PSC9_1, PSC8_0, PTL3_FN), + PINMUX_DATA(RMII_TXD1_MARK, PSC9_1, PSC8_0, PTL2_FN), + + PINMUX_DATA(MSIOF0_MCK_MARK, PSE5_0, PSE4_1, PTL0_FN), + + /* PTM FN */ + PINMUX_DATA(DV_D13_MARK, PSC13_0, PSC12_0, PTM7_FN), + PINMUX_DATA(DV_D12_MARK, PSC13_0, PSC12_0, PTM6_FN), + PINMUX_DATA(DV_D11_MARK, PSC13_0, PSC12_0, PTM5_FN), + PINMUX_DATA(DV_D10_MARK, PSC13_0, PSC12_0, PTM4_FN), + PINMUX_DATA(DV_D9_MARK, PSC11_0, PSC10_0, PTM3_FN), + PINMUX_DATA(DV_D8_MARK, PSC11_0, PSC10_0, PTM2_FN), + + PINMUX_DATA(MSIOF0_TSCK_MARK, PSC13_0, PSC12_1, PTM7_FN), + PINMUX_DATA(MSIOF0_RXD_MARK, PSC13_0, PSC12_1, PTM6_FN), + PINMUX_DATA(MSIOF0_TXD_MARK, PSC13_0, PSC12_1, PTM5_FN), + PINMUX_DATA(MSIOF0_TSYNC_MARK, PSC13_0, PSC12_1, PTM4_FN), + PINMUX_DATA(MSIOF0_SS1_MARK, PSC11_0, PSC10_1, PTM3_FN), + PINMUX_DATA(MSIOF0_RSCK_MARK, PSC11_1, PSC10_0, PTM3_FN), + PINMUX_DATA(MSIOF0_SS2_MARK, PSC11_0, PSC10_1, PTM2_FN), + PINMUX_DATA(MSIOF0_RSYNC_MARK, PSC11_1, PSC10_0, PTM2_FN), + + PINMUX_DATA(LCDVCPWC_MARK, PSA6_0, PTM1_FN), + PINMUX_DATA(LCDRD_MARK, PSA7_0, PTM0_FN), + + PINMUX_DATA(SCIF0_RXD_MARK, PSA6_1, PTM1_FN), + PINMUX_DATA(SCIF0_SCK_MARK, PSA7_1, PTM0_FN), + + /* PTN FN */ + PINMUX_DATA(VIO0_D1_MARK, PTN7_FN), + PINMUX_DATA(VIO0_D0_MARK, PTN6_FN), + + PINMUX_DATA(DV_CLKI_MARK, PSD11_0, PTN5_FN), + PINMUX_DATA(DV_CLK_MARK, PSD13_0, PSD12_0, PTN4_FN), + PINMUX_DATA(DV_VSYNC_MARK, PSD15_0, PSD14_0, PTN3_FN), + PINMUX_DATA(DV_HSYNC_MARK, PSB5_0, PSB4_0, PTN2_FN), + PINMUX_DATA(DV_D7_MARK, PSB3_0, PSB2_0, PTN1_FN), + PINMUX_DATA(DV_D6_MARK, PSB1_0, PSB0_0, PTN0_FN), + + PINMUX_DATA(SCIF2_V_SCK_MARK, PSD13_0, PSD12_1, PTN4_FN), + PINMUX_DATA(SCIF2_V_RXD_MARK, PSD15_0, PSD14_1, PTN3_FN), + PINMUX_DATA(SCIF2_V_TXD_MARK, PSB5_0, PSB4_1, PTN2_FN), + PINMUX_DATA(SCIF3_V_CTS_MARK, PSB3_0, PSB2_1, PTN1_FN), + PINMUX_DATA(SCIF3_V_RTS_MARK, PSB1_0, PSB0_1, PTN0_FN), + + PINMUX_DATA(RMII_RX_ER_MARK, PSB3_1, PSB2_0, PTN1_FN), + PINMUX_DATA(RMII_CRS_DV_MARK, PSB1_1, PSB0_0, PTN0_FN), + + /* PTQ FN */ + PINMUX_DATA(D7_MARK, PTQ7_FN), + PINMUX_DATA(D6_MARK, PTQ6_FN), + PINMUX_DATA(D5_MARK, PTQ5_FN), + PINMUX_DATA(D4_MARK, PTQ4_FN), + PINMUX_DATA(D3_MARK, PTQ3_FN), + PINMUX_DATA(D2_MARK, PTQ2_FN), + PINMUX_DATA(D1_MARK, PTQ1_FN), + PINMUX_DATA(D0_MARK, PTQ0_FN), + + /* PTR FN */ + PINMUX_DATA(CS6B_CE1B_MARK, PTR7_FN), + PINMUX_DATA(CS6A_CE2B_MARK, PTR6_FN), + PINMUX_DATA(CS5B_CE1A_MARK, PTR5_FN), + PINMUX_DATA(CS5A_CE2A_MARK, PTR4_FN), + PINMUX_DATA(IOIS16_MARK, PSA5_0, PTR3_FN), + PINMUX_DATA(WAIT_MARK, PTR2_FN), + PINMUX_DATA(WE3_ICIOWR_MARK, PSA1_0, PSA0_0, PTR1_FN), + PINMUX_DATA(WE2_ICIORD_MARK, PSD1_0, PSD0_0, PTR0_FN), + + PINMUX_DATA(LCDLCLK_MARK, PSA5_1, PTR3_FN), + + PINMUX_DATA(IDEA2_MARK, PSD1_1, PSD0_0, PTR0_FN), + + PINMUX_DATA(TPUTO3_MARK, PSA1_0, PSA0_1, PTR1_FN), + PINMUX_DATA(TPUTI3_MARK, PSA1_1, PSA0_0, PTR1_FN), + PINMUX_DATA(TPUTO2_MARK, PSD1_0, PSD0_1, PTR0_FN), + + /* PTS FN */ + PINMUX_DATA(VIO_CKO_MARK, PTS6_FN), + + PINMUX_DATA(TPUTI2_MARK, PSE9_0, PSE8_1, PTS5_FN), + + PINMUX_DATA(IDEIORDY_MARK, PSE9_1, PSE8_0, PTS5_FN), + + PINMUX_DATA(VIO1_FLD_MARK, PSE9_0, PSE8_0, PTS5_FN), + PINMUX_DATA(VIO1_HD_MARK, PSA10_0, PTS4_FN), + PINMUX_DATA(VIO1_VD_MARK, PSA9_0, PTS3_FN), + PINMUX_DATA(VIO1_CLK_MARK, PSA9_0, PTS2_FN), + PINMUX_DATA(VIO1_D7_MARK, PSB7_0, PSB6_0, PTS1_FN), + PINMUX_DATA(VIO1_D6_MARK, PSB7_0, PSB6_0, PTS0_FN), + + PINMUX_DATA(SCIF5_SCK_MARK, PSA10_1, PTS4_FN), + PINMUX_DATA(SCIF5_RXD_MARK, PSA9_1, PTS3_FN), + PINMUX_DATA(SCIF5_TXD_MARK, PSA9_1, PTS2_FN), + + PINMUX_DATA(VIO0_D15_MARK, PSB7_0, PSB6_1, PTS1_FN), + PINMUX_DATA(VIO0_D14_MARK, PSB7_0, PSB6_1, PTS0_FN), + + PINMUX_DATA(IDED7_MARK, PSB7_1, PSB6_0, PTS1_FN), + PINMUX_DATA(IDED6_MARK, PSB7_1, PSB6_0, PTS0_FN), + + /* PTT FN */ + PINMUX_DATA(D15_MARK, PTT7_FN), + PINMUX_DATA(D14_MARK, PTT6_FN), + PINMUX_DATA(D13_MARK, PTT5_FN), + PINMUX_DATA(D12_MARK, PTT4_FN), + PINMUX_DATA(D11_MARK, PTT3_FN), + PINMUX_DATA(D10_MARK, PTT2_FN), + PINMUX_DATA(D9_MARK, PTT1_FN), + PINMUX_DATA(D8_MARK, PTT0_FN), + + /* PTU FN */ + PINMUX_DATA(DMAC_DACK0_MARK, PTU7_FN), + PINMUX_DATA(DMAC_DREQ0_MARK, PTU6_FN), + + PINMUX_DATA(FSIOASD_MARK, PSE1_0, PTU5_FN), + PINMUX_DATA(FSIIABCK_MARK, PSE1_0, PTU4_FN), + PINMUX_DATA(FSIIALRCK_MARK, PSE1_0, PTU3_FN), + PINMUX_DATA(FSIOABCK_MARK, PSE1_0, PTU2_FN), + PINMUX_DATA(FSIOALRCK_MARK, PSE1_0, PTU1_FN), + PINMUX_DATA(CLKAUDIOAO_MARK, PSE0_0, PTU0_FN), + + /* PTV FN */ + PINMUX_DATA(FSIIBSD_MARK, PSD7_0, PSD6_0, PTV7_FN), + PINMUX_DATA(FSIOBSD_MARK, PSD7_0, PSD6_0, PTV6_FN), + PINMUX_DATA(FSIIBBCK_MARK, PSC15_0, PSC14_0, PTV5_FN), + PINMUX_DATA(FSIIBLRCK_MARK, PSC15_0, PSC14_0, PTV4_FN), + PINMUX_DATA(FSIOBBCK_MARK, PSC15_0, PSC14_0, PTV3_FN), + PINMUX_DATA(FSIOBLRCK_MARK, PSC15_0, PSC14_0, PTV2_FN), + PINMUX_DATA(CLKAUDIOBO_MARK, PSE3_0, PSE2_0, PTV1_FN), + PINMUX_DATA(FSIIASD_MARK, PSE10_0, PTV0_FN), + + PINMUX_DATA(MSIOF1_SS2_MARK, PSD7_0, PSD6_1, PTV7_FN), + PINMUX_DATA(MSIOF1_RSYNC_MARK, PSD7_1, PSD6_0, PTV7_FN), + PINMUX_DATA(MSIOF1_SS1_MARK, PSD7_0, PSD6_1, PTV6_FN), + PINMUX_DATA(MSIOF1_RSCK_MARK, PSD7_1, PSD6_0, PTV6_FN), + PINMUX_DATA(MSIOF1_RXD_MARK, PSC15_0, PSC14_1, PTV5_FN), + PINMUX_DATA(MSIOF1_TSYNC_MARK, PSC15_0, PSC14_1, PTV4_FN), + PINMUX_DATA(MSIOF1_TSCK_MARK, PSC15_0, PSC14_1, PTV3_FN), + PINMUX_DATA(MSIOF1_TXD_MARK, PSC15_0, PSC14_1, PTV2_FN), + PINMUX_DATA(MSIOF1_MCK_MARK, PSE3_0, PSE2_1, PTV1_FN), + + /* PTW FN */ + PINMUX_DATA(MMC_D7_MARK, PSE13_0, PSE12_0, PTW7_FN), + PINMUX_DATA(MMC_D6_MARK, PSE13_0, PSE12_0, PTW6_FN), + PINMUX_DATA(MMC_D5_MARK, PSE13_0, PSE12_0, PTW5_FN), + PINMUX_DATA(MMC_D4_MARK, PSE13_0, PSE12_0, PTW4_FN), + PINMUX_DATA(MMC_D3_MARK, PSA13_0, PTW3_FN), + PINMUX_DATA(MMC_D2_MARK, PSA13_0, PTW2_FN), + PINMUX_DATA(MMC_D1_MARK, PSA13_0, PTW1_FN), + PINMUX_DATA(MMC_D0_MARK, PSA13_0, PTW0_FN), + + PINMUX_DATA(SDHI1CD_MARK, PSE13_0, PSE12_1, PTW7_FN), + PINMUX_DATA(SDHI1WP_MARK, PSE13_0, PSE12_1, PTW6_FN), + PINMUX_DATA(SDHI1D3_MARK, PSE13_0, PSE12_1, PTW5_FN), + PINMUX_DATA(SDHI1D2_MARK, PSE13_0, PSE12_1, PTW4_FN), + PINMUX_DATA(SDHI1D1_MARK, PSA13_1, PTW3_FN), + PINMUX_DATA(SDHI1D0_MARK, PSA13_1, PTW2_FN), + PINMUX_DATA(SDHI1CMD_MARK, PSA13_1, PTW1_FN), + PINMUX_DATA(SDHI1CLK_MARK, PSA13_1, PTW0_FN), + + PINMUX_DATA(IODACK_MARK, PSE13_1, PSE12_0, PTW7_FN), + PINMUX_DATA(IDERST_MARK, PSE13_1, PSE12_0, PTW6_FN), + PINMUX_DATA(EXBUF_ENB_MARK, PSE13_1, PSE12_0, PTW5_FN), + PINMUX_DATA(DIRECTION_MARK, PSE13_1, PSE12_0, PTW4_FN), + + /* PTX FN */ + PINMUX_DATA(DMAC_DACK1_MARK, PSA12_0, PTX7_FN), + PINMUX_DATA(DMAC_DREQ1_MARK, PSA12_0, PTX6_FN), + + PINMUX_DATA(IRDA_OUT_MARK, PSA12_1, PTX7_FN), + PINMUX_DATA(IRDA_IN_MARK, PSA12_1, PTX6_FN), + + PINMUX_DATA(TSIF_TS0_SDAT_MARK, PSC0_0, PTX5_FN), + PINMUX_DATA(TSIF_TS0_SCK_MARK, PSC1_0, PTX4_FN), + PINMUX_DATA(TSIF_TS0_SDEN_MARK, PSC2_0, PTX3_FN), + PINMUX_DATA(TSIF_TS0_SPSYNC_MARK, PTX2_FN), + + PINMUX_DATA(LNKSTA_MARK, PSC0_1, PTX5_FN), + PINMUX_DATA(MDIO_MARK, PSC1_1, PTX4_FN), + PINMUX_DATA(MDC_MARK, PSC2_1, PTX3_FN), + + PINMUX_DATA(MMC_CLK_MARK, PTX1_FN), + PINMUX_DATA(MMC_CMD_MARK, PTX0_FN), + + /* PTY FN */ + PINMUX_DATA(SDHI0CD_MARK, PTY7_FN), + PINMUX_DATA(SDHI0WP_MARK, PTY6_FN), + PINMUX_DATA(SDHI0D3_MARK, PTY5_FN), + PINMUX_DATA(SDHI0D2_MARK, PTY4_FN), + PINMUX_DATA(SDHI0D1_MARK, PTY3_FN), + PINMUX_DATA(SDHI0D0_MARK, PTY2_FN), + PINMUX_DATA(SDHI0CMD_MARK, PTY1_FN), + PINMUX_DATA(SDHI0CLK_MARK, PTY0_FN), + + /* PTZ FN */ + PINMUX_DATA(INTC_IRQ7_MARK, PSB10_0, PTZ7_FN), + PINMUX_DATA(INTC_IRQ6_MARK, PSB11_0, PTZ6_FN), + PINMUX_DATA(INTC_IRQ5_MARK, PSB12_0, PTZ5_FN), + PINMUX_DATA(INTC_IRQ4_MARK, PSB13_0, PTZ4_FN), + PINMUX_DATA(INTC_IRQ3_MARK, PSB14_0, PTZ3_FN), + PINMUX_DATA(INTC_IRQ2_MARK, PTZ2_FN), + PINMUX_DATA(INTC_IRQ1_MARK, PTZ1_FN), + PINMUX_DATA(INTC_IRQ0_MARK, PTZ0_FN), + + PINMUX_DATA(SCIF3_I_CTS_MARK, PSB10_1, PTZ7_FN), + PINMUX_DATA(SCIF3_I_RTS_MARK, PSB11_1, PTZ6_FN), + PINMUX_DATA(SCIF3_I_SCK_MARK, PSB12_1, PTZ5_FN), + PINMUX_DATA(SCIF3_I_RXD_MARK, PSB13_1, PTZ4_FN), + PINMUX_DATA(SCIF3_I_TXD_MARK, PSB14_1, PTZ3_FN), +}; + +static struct pinmux_gpio pinmux_gpios[] = { + /* PTA */ + PINMUX_GPIO(GPIO_PTA7, PTA7_DATA), + PINMUX_GPIO(GPIO_PTA6, PTA6_DATA), + PINMUX_GPIO(GPIO_PTA5, PTA5_DATA), + PINMUX_GPIO(GPIO_PTA4, PTA4_DATA), + PINMUX_GPIO(GPIO_PTA3, PTA3_DATA), + PINMUX_GPIO(GPIO_PTA2, PTA2_DATA), + PINMUX_GPIO(GPIO_PTA1, PTA1_DATA), + PINMUX_GPIO(GPIO_PTA0, PTA0_DATA), + + /* PTB */ + PINMUX_GPIO(GPIO_PTB7, PTB7_DATA), + PINMUX_GPIO(GPIO_PTB6, PTB6_DATA), + PINMUX_GPIO(GPIO_PTB5, PTB5_DATA), + PINMUX_GPIO(GPIO_PTB4, PTB4_DATA), + PINMUX_GPIO(GPIO_PTB3, PTB3_DATA), + PINMUX_GPIO(GPIO_PTB2, PTB2_DATA), + PINMUX_GPIO(GPIO_PTB1, PTB1_DATA), + PINMUX_GPIO(GPIO_PTB0, PTB0_DATA), + + /* PTC */ + PINMUX_GPIO(GPIO_PTC7, PTC7_DATA), + PINMUX_GPIO(GPIO_PTC6, PTC6_DATA), + PINMUX_GPIO(GPIO_PTC5, PTC5_DATA), + PINMUX_GPIO(GPIO_PTC4, PTC4_DATA), + PINMUX_GPIO(GPIO_PTC3, PTC3_DATA), + PINMUX_GPIO(GPIO_PTC2, PTC2_DATA), + PINMUX_GPIO(GPIO_PTC1, PTC1_DATA), + PINMUX_GPIO(GPIO_PTC0, PTC0_DATA), + + /* PTD */ + PINMUX_GPIO(GPIO_PTD7, PTD7_DATA), + PINMUX_GPIO(GPIO_PTD6, PTD6_DATA), + PINMUX_GPIO(GPIO_PTD5, PTD5_DATA), + PINMUX_GPIO(GPIO_PTD4, PTD4_DATA), + PINMUX_GPIO(GPIO_PTD3, PTD3_DATA), + PINMUX_GPIO(GPIO_PTD2, PTD2_DATA), + PINMUX_GPIO(GPIO_PTD1, PTD1_DATA), + PINMUX_GPIO(GPIO_PTD0, PTD0_DATA), + + /* PTE */ + PINMUX_GPIO(GPIO_PTE7, PTE7_DATA), + PINMUX_GPIO(GPIO_PTE6, PTE6_DATA), + PINMUX_GPIO(GPIO_PTE5, PTE5_DATA), + PINMUX_GPIO(GPIO_PTE4, PTE4_DATA), + PINMUX_GPIO(GPIO_PTE3, PTE3_DATA), + PINMUX_GPIO(GPIO_PTE2, PTE2_DATA), + PINMUX_GPIO(GPIO_PTE1, PTE1_DATA), + PINMUX_GPIO(GPIO_PTE0, PTE0_DATA), + + /* PTF */ + PINMUX_GPIO(GPIO_PTF7, PTF7_DATA), + PINMUX_GPIO(GPIO_PTF6, PTF6_DATA), + PINMUX_GPIO(GPIO_PTF5, PTF5_DATA), + PINMUX_GPIO(GPIO_PTF4, PTF4_DATA), + PINMUX_GPIO(GPIO_PTF3, PTF3_DATA), + PINMUX_GPIO(GPIO_PTF2, PTF2_DATA), + PINMUX_GPIO(GPIO_PTF1, PTF1_DATA), + PINMUX_GPIO(GPIO_PTF0, PTF0_DATA), + + /* PTG */ + PINMUX_GPIO(GPIO_PTG5, PTG5_DATA), + PINMUX_GPIO(GPIO_PTG4, PTG4_DATA), + PINMUX_GPIO(GPIO_PTG3, PTG3_DATA), + PINMUX_GPIO(GPIO_PTG2, PTG2_DATA), + PINMUX_GPIO(GPIO_PTG1, PTG1_DATA), + PINMUX_GPIO(GPIO_PTG0, PTG0_DATA), + + /* PTH */ + PINMUX_GPIO(GPIO_PTH7, PTH7_DATA), + PINMUX_GPIO(GPIO_PTH6, PTH6_DATA), + PINMUX_GPIO(GPIO_PTH5, PTH5_DATA), + PINMUX_GPIO(GPIO_PTH4, PTH4_DATA), + PINMUX_GPIO(GPIO_PTH3, PTH3_DATA), + PINMUX_GPIO(GPIO_PTH2, PTH2_DATA), + PINMUX_GPIO(GPIO_PTH1, PTH1_DATA), + PINMUX_GPIO(GPIO_PTH0, PTH0_DATA), + + /* PTJ */ + PINMUX_GPIO(GPIO_PTJ7, PTJ7_DATA), + PINMUX_GPIO(GPIO_PTJ6, PTJ6_DATA), + PINMUX_GPIO(GPIO_PTJ5, PTJ5_DATA), + PINMUX_GPIO(GPIO_PTJ3, PTJ3_DATA), + PINMUX_GPIO(GPIO_PTJ2, PTJ2_DATA), + PINMUX_GPIO(GPIO_PTJ1, PTJ1_DATA), + PINMUX_GPIO(GPIO_PTJ0, PTJ0_DATA), + + /* PTK */ + PINMUX_GPIO(GPIO_PTK7, PTK7_DATA), + PINMUX_GPIO(GPIO_PTK6, PTK6_DATA), + PINMUX_GPIO(GPIO_PTK5, PTK5_DATA), + PINMUX_GPIO(GPIO_PTK4, PTK4_DATA), + PINMUX_GPIO(GPIO_PTK3, PTK3_DATA), + PINMUX_GPIO(GPIO_PTK2, PTK2_DATA), + PINMUX_GPIO(GPIO_PTK1, PTK1_DATA), + PINMUX_GPIO(GPIO_PTK0, PTK0_DATA), + + /* PTL */ + PINMUX_GPIO(GPIO_PTL7, PTL7_DATA), + PINMUX_GPIO(GPIO_PTL6, PTL6_DATA), + PINMUX_GPIO(GPIO_PTL5, PTL5_DATA), + PINMUX_GPIO(GPIO_PTL4, PTL4_DATA), + PINMUX_GPIO(GPIO_PTL3, PTL3_DATA), + PINMUX_GPIO(GPIO_PTL2, PTL2_DATA), + PINMUX_GPIO(GPIO_PTL1, PTL1_DATA), + PINMUX_GPIO(GPIO_PTL0, PTL0_DATA), + + /* PTM */ + PINMUX_GPIO(GPIO_PTM7, PTM7_DATA), + PINMUX_GPIO(GPIO_PTM6, PTM6_DATA), + PINMUX_GPIO(GPIO_PTM5, PTM5_DATA), + PINMUX_GPIO(GPIO_PTM4, PTM4_DATA), + PINMUX_GPIO(GPIO_PTM3, PTM3_DATA), + PINMUX_GPIO(GPIO_PTM2, PTM2_DATA), + PINMUX_GPIO(GPIO_PTM1, PTM1_DATA), + PINMUX_GPIO(GPIO_PTM0, PTM0_DATA), + + /* PTN */ + PINMUX_GPIO(GPIO_PTN7, PTN7_DATA), + PINMUX_GPIO(GPIO_PTN6, PTN6_DATA), + PINMUX_GPIO(GPIO_PTN5, PTN5_DATA), + PINMUX_GPIO(GPIO_PTN4, PTN4_DATA), + PINMUX_GPIO(GPIO_PTN3, PTN3_DATA), + PINMUX_GPIO(GPIO_PTN2, PTN2_DATA), + PINMUX_GPIO(GPIO_PTN1, PTN1_DATA), + PINMUX_GPIO(GPIO_PTN0, PTN0_DATA), + + /* PTQ */ + PINMUX_GPIO(GPIO_PTQ7, PTQ7_DATA), + PINMUX_GPIO(GPIO_PTQ6, PTQ6_DATA), + PINMUX_GPIO(GPIO_PTQ5, PTQ5_DATA), + PINMUX_GPIO(GPIO_PTQ4, PTQ4_DATA), + PINMUX_GPIO(GPIO_PTQ3, PTQ3_DATA), + PINMUX_GPIO(GPIO_PTQ2, PTQ2_DATA), + PINMUX_GPIO(GPIO_PTQ1, PTQ1_DATA), + PINMUX_GPIO(GPIO_PTQ0, PTQ0_DATA), + + /* PTR */ + PINMUX_GPIO(GPIO_PTR7, PTR7_DATA), + PINMUX_GPIO(GPIO_PTR6, PTR6_DATA), + PINMUX_GPIO(GPIO_PTR5, PTR5_DATA), + PINMUX_GPIO(GPIO_PTR4, PTR4_DATA), + PINMUX_GPIO(GPIO_PTR3, PTR3_DATA), + PINMUX_GPIO(GPIO_PTR2, PTR2_DATA), + PINMUX_GPIO(GPIO_PTR1, PTR1_DATA), + PINMUX_GPIO(GPIO_PTR0, PTR0_DATA), + + /* PTS */ + PINMUX_GPIO(GPIO_PTS6, PTS6_DATA), + PINMUX_GPIO(GPIO_PTS5, PTS5_DATA), + PINMUX_GPIO(GPIO_PTS4, PTS4_DATA), + PINMUX_GPIO(GPIO_PTS3, PTS3_DATA), + PINMUX_GPIO(GPIO_PTS2, PTS2_DATA), + PINMUX_GPIO(GPIO_PTS1, PTS1_DATA), + PINMUX_GPIO(GPIO_PTS0, PTS0_DATA), + + /* PTT */ + PINMUX_GPIO(GPIO_PTT7, PTT7_DATA), + PINMUX_GPIO(GPIO_PTT6, PTT6_DATA), + PINMUX_GPIO(GPIO_PTT5, PTT5_DATA), + PINMUX_GPIO(GPIO_PTT4, PTT4_DATA), + PINMUX_GPIO(GPIO_PTT3, PTT3_DATA), + PINMUX_GPIO(GPIO_PTT2, PTT2_DATA), + PINMUX_GPIO(GPIO_PTT1, PTT1_DATA), + PINMUX_GPIO(GPIO_PTT0, PTT0_DATA), + + /* PTU */ + PINMUX_GPIO(GPIO_PTU7, PTU7_DATA), + PINMUX_GPIO(GPIO_PTU6, PTU6_DATA), + PINMUX_GPIO(GPIO_PTU5, PTU5_DATA), + PINMUX_GPIO(GPIO_PTU4, PTU4_DATA), + PINMUX_GPIO(GPIO_PTU3, PTU3_DATA), + PINMUX_GPIO(GPIO_PTU2, PTU2_DATA), + PINMUX_GPIO(GPIO_PTU1, PTU1_DATA), + PINMUX_GPIO(GPIO_PTU0, PTU0_DATA), + + /* PTV */ + PINMUX_GPIO(GPIO_PTV7, PTV7_DATA), + PINMUX_GPIO(GPIO_PTV6, PTV6_DATA), + PINMUX_GPIO(GPIO_PTV5, PTV5_DATA), + PINMUX_GPIO(GPIO_PTV4, PTV4_DATA), + PINMUX_GPIO(GPIO_PTV3, PTV3_DATA), + PINMUX_GPIO(GPIO_PTV2, PTV2_DATA), + PINMUX_GPIO(GPIO_PTV1, PTV1_DATA), + PINMUX_GPIO(GPIO_PTV0, PTV0_DATA), + + /* PTW */ + PINMUX_GPIO(GPIO_PTW7, PTW7_DATA), + PINMUX_GPIO(GPIO_PTW6, PTW6_DATA), + PINMUX_GPIO(GPIO_PTW5, PTW5_DATA), + PINMUX_GPIO(GPIO_PTW4, PTW4_DATA), + PINMUX_GPIO(GPIO_PTW3, PTW3_DATA), + PINMUX_GPIO(GPIO_PTW2, PTW2_DATA), + PINMUX_GPIO(GPIO_PTW1, PTW1_DATA), + PINMUX_GPIO(GPIO_PTW0, PTW0_DATA), + + /* PTX */ + PINMUX_GPIO(GPIO_PTX7, PTX7_DATA), + PINMUX_GPIO(GPIO_PTX6, PTX6_DATA), + PINMUX_GPIO(GPIO_PTX5, PTX5_DATA), + PINMUX_GPIO(GPIO_PTX4, PTX4_DATA), + PINMUX_GPIO(GPIO_PTX3, PTX3_DATA), + PINMUX_GPIO(GPIO_PTX2, PTX2_DATA), + PINMUX_GPIO(GPIO_PTX1, PTX1_DATA), + PINMUX_GPIO(GPIO_PTX0, PTX0_DATA), + + /* PTY */ + PINMUX_GPIO(GPIO_PTY7, PTY7_DATA), + PINMUX_GPIO(GPIO_PTY6, PTY6_DATA), + PINMUX_GPIO(GPIO_PTY5, PTY5_DATA), + PINMUX_GPIO(GPIO_PTY4, PTY4_DATA), + PINMUX_GPIO(GPIO_PTY3, PTY3_DATA), + PINMUX_GPIO(GPIO_PTY2, PTY2_DATA), + PINMUX_GPIO(GPIO_PTY1, PTY1_DATA), + PINMUX_GPIO(GPIO_PTY0, PTY0_DATA), + + /* PTZ */ + PINMUX_GPIO(GPIO_PTZ7, PTZ7_DATA), + PINMUX_GPIO(GPIO_PTZ6, PTZ6_DATA), + PINMUX_GPIO(GPIO_PTZ5, PTZ5_DATA), + PINMUX_GPIO(GPIO_PTZ4, PTZ4_DATA), + PINMUX_GPIO(GPIO_PTZ3, PTZ3_DATA), + PINMUX_GPIO(GPIO_PTZ2, PTZ2_DATA), + PINMUX_GPIO(GPIO_PTZ1, PTZ1_DATA), + PINMUX_GPIO(GPIO_PTZ0, PTZ0_DATA), + + /* BSC */ + PINMUX_GPIO(GPIO_FN_D31, D31_MARK), + PINMUX_GPIO(GPIO_FN_D30, D30_MARK), + PINMUX_GPIO(GPIO_FN_D29, D29_MARK), + PINMUX_GPIO(GPIO_FN_D28, D28_MARK), + PINMUX_GPIO(GPIO_FN_D27, D27_MARK), + PINMUX_GPIO(GPIO_FN_D26, D26_MARK), + PINMUX_GPIO(GPIO_FN_D25, D25_MARK), + PINMUX_GPIO(GPIO_FN_D24, D24_MARK), + PINMUX_GPIO(GPIO_FN_D23, D23_MARK), + PINMUX_GPIO(GPIO_FN_D22, D22_MARK), + PINMUX_GPIO(GPIO_FN_D21, D21_MARK), + PINMUX_GPIO(GPIO_FN_D20, D20_MARK), + PINMUX_GPIO(GPIO_FN_D19, D19_MARK), + PINMUX_GPIO(GPIO_FN_D18, D18_MARK), + PINMUX_GPIO(GPIO_FN_D17, D17_MARK), + PINMUX_GPIO(GPIO_FN_D16, D16_MARK), + PINMUX_GPIO(GPIO_FN_D15, D15_MARK), + PINMUX_GPIO(GPIO_FN_D14, D14_MARK), + PINMUX_GPIO(GPIO_FN_D13, D13_MARK), + PINMUX_GPIO(GPIO_FN_D12, D12_MARK), + PINMUX_GPIO(GPIO_FN_D11, D11_MARK), + PINMUX_GPIO(GPIO_FN_D10, D10_MARK), + PINMUX_GPIO(GPIO_FN_D9, D9_MARK), + PINMUX_GPIO(GPIO_FN_D8, D8_MARK), + PINMUX_GPIO(GPIO_FN_D7, D7_MARK), + PINMUX_GPIO(GPIO_FN_D6, D6_MARK), + PINMUX_GPIO(GPIO_FN_D5, D5_MARK), + PINMUX_GPIO(GPIO_FN_D4, D4_MARK), + PINMUX_GPIO(GPIO_FN_D3, D3_MARK), + PINMUX_GPIO(GPIO_FN_D2, D2_MARK), + PINMUX_GPIO(GPIO_FN_D1, D1_MARK), + PINMUX_GPIO(GPIO_FN_D0, D0_MARK), + PINMUX_GPIO(GPIO_FN_A25, A25_MARK), + PINMUX_GPIO(GPIO_FN_A24, A24_MARK), + PINMUX_GPIO(GPIO_FN_A23, A23_MARK), + PINMUX_GPIO(GPIO_FN_A22, A22_MARK), + PINMUX_GPIO(GPIO_FN_CS6B_CE1B, CS6B_CE1B_MARK), + PINMUX_GPIO(GPIO_FN_CS6A_CE2B, CS6A_CE2B_MARK), + PINMUX_GPIO(GPIO_FN_CS5B_CE1A, CS5B_CE1A_MARK), + PINMUX_GPIO(GPIO_FN_CS5A_CE2A, CS5A_CE2A_MARK), + PINMUX_GPIO(GPIO_FN_WE3_ICIOWR, WE3_ICIOWR_MARK), + PINMUX_GPIO(GPIO_FN_WE2_ICIORD, WE2_ICIORD_MARK), + PINMUX_GPIO(GPIO_FN_IOIS16, IOIS16_MARK), + PINMUX_GPIO(GPIO_FN_WAIT, WAIT_MARK), + PINMUX_GPIO(GPIO_FN_BS, BS_MARK), + + /* KEYSC */ + PINMUX_GPIO(GPIO_FN_KEYOUT5_IN5, KEYOUT5_IN5_MARK), + PINMUX_GPIO(GPIO_FN_KEYOUT4_IN6, KEYOUT4_IN6_MARK), + PINMUX_GPIO(GPIO_FN_KEYIN4, KEYIN4_MARK), + PINMUX_GPIO(GPIO_FN_KEYIN3, KEYIN3_MARK), + PINMUX_GPIO(GPIO_FN_KEYIN2, KEYIN2_MARK), + PINMUX_GPIO(GPIO_FN_KEYIN1, KEYIN1_MARK), + PINMUX_GPIO(GPIO_FN_KEYIN0, KEYIN0_MARK), + PINMUX_GPIO(GPIO_FN_KEYOUT3, KEYOUT3_MARK), + PINMUX_GPIO(GPIO_FN_KEYOUT2, KEYOUT2_MARK), + PINMUX_GPIO(GPIO_FN_KEYOUT1, KEYOUT1_MARK), + PINMUX_GPIO(GPIO_FN_KEYOUT0, KEYOUT0_MARK), + + /* ATAPI */ + PINMUX_GPIO(GPIO_FN_IDED15, IDED15_MARK), + PINMUX_GPIO(GPIO_FN_IDED14, IDED14_MARK), + PINMUX_GPIO(GPIO_FN_IDED13, IDED13_MARK), + PINMUX_GPIO(GPIO_FN_IDED12, IDED12_MARK), + PINMUX_GPIO(GPIO_FN_IDED11, IDED11_MARK), + PINMUX_GPIO(GPIO_FN_IDED10, IDED10_MARK), + PINMUX_GPIO(GPIO_FN_IDED9, IDED9_MARK), + PINMUX_GPIO(GPIO_FN_IDED8, IDED8_MARK), + PINMUX_GPIO(GPIO_FN_IDED7, IDED7_MARK), + PINMUX_GPIO(GPIO_FN_IDED6, IDED6_MARK), + PINMUX_GPIO(GPIO_FN_IDED5, IDED5_MARK), + PINMUX_GPIO(GPIO_FN_IDED4, IDED4_MARK), + PINMUX_GPIO(GPIO_FN_IDED3, IDED3_MARK), + PINMUX_GPIO(GPIO_FN_IDED2, IDED2_MARK), + PINMUX_GPIO(GPIO_FN_IDED1, IDED1_MARK), + PINMUX_GPIO(GPIO_FN_IDED0, IDED0_MARK), + PINMUX_GPIO(GPIO_FN_IDEA2, IDEA2_MARK), + PINMUX_GPIO(GPIO_FN_IDEA1, IDEA1_MARK), + PINMUX_GPIO(GPIO_FN_IDEA0, IDEA0_MARK), + PINMUX_GPIO(GPIO_FN_IDEIOWR, IDEIOWR_MARK), + PINMUX_GPIO(GPIO_FN_IODREQ, IODREQ_MARK), + PINMUX_GPIO(GPIO_FN_IDECS0, IDECS0_MARK), + PINMUX_GPIO(GPIO_FN_IDECS1, IDECS1_MARK), + PINMUX_GPIO(GPIO_FN_IDEIORD, IDEIORD_MARK), + PINMUX_GPIO(GPIO_FN_DIRECTION, DIRECTION_MARK), + PINMUX_GPIO(GPIO_FN_EXBUF_ENB, EXBUF_ENB_MARK), + PINMUX_GPIO(GPIO_FN_IDERST, IDERST_MARK), + PINMUX_GPIO(GPIO_FN_IODACK, IODACK_MARK), + PINMUX_GPIO(GPIO_FN_IDEINT, IDEINT_MARK), + PINMUX_GPIO(GPIO_FN_IDEIORDY, IDEIORDY_MARK), + + /* TPU */ + PINMUX_GPIO(GPIO_FN_TPUTO3, TPUTO3_MARK), + PINMUX_GPIO(GPIO_FN_TPUTO2, TPUTO2_MARK), + PINMUX_GPIO(GPIO_FN_TPUTO1, TPUTO1_MARK), + PINMUX_GPIO(GPIO_FN_TPUTO0, TPUTO0_MARK), + PINMUX_GPIO(GPIO_FN_TPUTI3, TPUTI3_MARK), + PINMUX_GPIO(GPIO_FN_TPUTI2, TPUTI2_MARK), + + /* LCDC */ + PINMUX_GPIO(GPIO_FN_LCDD23, LCDD23_MARK), + PINMUX_GPIO(GPIO_FN_LCDD22, LCDD22_MARK), + PINMUX_GPIO(GPIO_FN_LCDD21, LCDD21_MARK), + PINMUX_GPIO(GPIO_FN_LCDD20, LCDD20_MARK), + PINMUX_GPIO(GPIO_FN_LCDD19, LCDD19_MARK), + PINMUX_GPIO(GPIO_FN_LCDD18, LCDD18_MARK), + PINMUX_GPIO(GPIO_FN_LCDD17, LCDD17_MARK), + PINMUX_GPIO(GPIO_FN_LCDD16, LCDD16_MARK), + PINMUX_GPIO(GPIO_FN_LCDD15, LCDD15_MARK), + PINMUX_GPIO(GPIO_FN_LCDD14, LCDD14_MARK), + PINMUX_GPIO(GPIO_FN_LCDD13, LCDD13_MARK), + PINMUX_GPIO(GPIO_FN_LCDD12, LCDD12_MARK), + PINMUX_GPIO(GPIO_FN_LCDD11, LCDD11_MARK), + PINMUX_GPIO(GPIO_FN_LCDD10, LCDD10_MARK), + PINMUX_GPIO(GPIO_FN_LCDD9, LCDD9_MARK), + PINMUX_GPIO(GPIO_FN_LCDD8, LCDD8_MARK), + PINMUX_GPIO(GPIO_FN_LCDD7, LCDD7_MARK), + PINMUX_GPIO(GPIO_FN_LCDD6, LCDD6_MARK), + PINMUX_GPIO(GPIO_FN_LCDD5, LCDD5_MARK), + PINMUX_GPIO(GPIO_FN_LCDD4, LCDD4_MARK), + PINMUX_GPIO(GPIO_FN_LCDD3, LCDD3_MARK), + PINMUX_GPIO(GPIO_FN_LCDD2, LCDD2_MARK), + PINMUX_GPIO(GPIO_FN_LCDD1, LCDD1_MARK), + PINMUX_GPIO(GPIO_FN_LCDD0, LCDD0_MARK), + PINMUX_GPIO(GPIO_FN_LCDVSYN, LCDVSYN_MARK), + PINMUX_GPIO(GPIO_FN_LCDDISP, LCDDISP_MARK), + PINMUX_GPIO(GPIO_FN_LCDRS, LCDRS_MARK), + PINMUX_GPIO(GPIO_FN_LCDHSYN, LCDHSYN_MARK), + PINMUX_GPIO(GPIO_FN_LCDCS, LCDCS_MARK), + PINMUX_GPIO(GPIO_FN_LCDDON, LCDDON_MARK), + PINMUX_GPIO(GPIO_FN_LCDDCK, LCDDCK_MARK), + PINMUX_GPIO(GPIO_FN_LCDWR, LCDWR_MARK), + PINMUX_GPIO(GPIO_FN_LCDVEPWC, LCDVEPWC_MARK), + PINMUX_GPIO(GPIO_FN_LCDVCPWC, LCDVCPWC_MARK), + PINMUX_GPIO(GPIO_FN_LCDRD, LCDRD_MARK), + PINMUX_GPIO(GPIO_FN_LCDLCLK, LCDLCLK_MARK), + + /* SCIF0 */ + PINMUX_GPIO(GPIO_FN_SCIF0_TXD, SCIF0_TXD_MARK), + PINMUX_GPIO(GPIO_FN_SCIF0_RXD, SCIF0_RXD_MARK), + PINMUX_GPIO(GPIO_FN_SCIF0_SCK, SCIF0_SCK_MARK), + + /* SCIF1 */ + PINMUX_GPIO(GPIO_FN_SCIF1_SCK, SCIF1_SCK_MARK), + PINMUX_GPIO(GPIO_FN_SCIF1_RXD, SCIF1_RXD_MARK), + PINMUX_GPIO(GPIO_FN_SCIF1_TXD, SCIF1_TXD_MARK), + + /* SCIF2 */ + PINMUX_GPIO(GPIO_FN_SCIF2_L_TXD, SCIF2_L_TXD_MARK), + PINMUX_GPIO(GPIO_FN_SCIF2_L_SCK, SCIF2_L_SCK_MARK), + PINMUX_GPIO(GPIO_FN_SCIF2_L_RXD, SCIF2_L_RXD_MARK), + PINMUX_GPIO(GPIO_FN_SCIF2_V_TXD, SCIF2_V_TXD_MARK), + PINMUX_GPIO(GPIO_FN_SCIF2_V_SCK, SCIF2_V_SCK_MARK), + PINMUX_GPIO(GPIO_FN_SCIF2_V_RXD, SCIF2_V_RXD_MARK), + + /* SCIF3 */ + PINMUX_GPIO(GPIO_FN_SCIF3_V_SCK, SCIF3_V_SCK_MARK), + PINMUX_GPIO(GPIO_FN_SCIF3_V_RXD, SCIF3_V_RXD_MARK), + PINMUX_GPIO(GPIO_FN_SCIF3_V_TXD, SCIF3_V_TXD_MARK), + PINMUX_GPIO(GPIO_FN_SCIF3_V_CTS, SCIF3_V_CTS_MARK), + PINMUX_GPIO(GPIO_FN_SCIF3_V_RTS, SCIF3_V_RTS_MARK), + PINMUX_GPIO(GPIO_FN_SCIF3_I_SCK, SCIF3_I_SCK_MARK), + PINMUX_GPIO(GPIO_FN_SCIF3_I_RXD, SCIF3_I_RXD_MARK), + PINMUX_GPIO(GPIO_FN_SCIF3_I_TXD, SCIF3_I_TXD_MARK), + PINMUX_GPIO(GPIO_FN_SCIF3_I_CTS, SCIF3_I_CTS_MARK), + PINMUX_GPIO(GPIO_FN_SCIF3_I_RTS, SCIF3_I_RTS_MARK), + + /* SCIF4 */ + PINMUX_GPIO(GPIO_FN_SCIF4_SCK, SCIF4_SCK_MARK), + PINMUX_GPIO(GPIO_FN_SCIF4_RXD, SCIF4_RXD_MARK), + PINMUX_GPIO(GPIO_FN_SCIF4_TXD, SCIF4_TXD_MARK), + + /* SCIF5 */ + PINMUX_GPIO(GPIO_FN_SCIF5_SCK, SCIF5_SCK_MARK), + PINMUX_GPIO(GPIO_FN_SCIF5_RXD, SCIF5_RXD_MARK), + PINMUX_GPIO(GPIO_FN_SCIF5_TXD, SCIF5_TXD_MARK), + + /* FSI */ + PINMUX_GPIO(GPIO_FN_FSIMCKB, FSIMCKB_MARK), + PINMUX_GPIO(GPIO_FN_FSIMCKA, FSIMCKA_MARK), + PINMUX_GPIO(GPIO_FN_FSIOASD, FSIOASD_MARK), + PINMUX_GPIO(GPIO_FN_FSIIABCK, FSIIABCK_MARK), + PINMUX_GPIO(GPIO_FN_FSIIALRCK, FSIIALRCK_MARK), + PINMUX_GPIO(GPIO_FN_FSIOABCK, FSIOABCK_MARK), + PINMUX_GPIO(GPIO_FN_FSIOALRCK, FSIOALRCK_MARK), + PINMUX_GPIO(GPIO_FN_CLKAUDIOAO, CLKAUDIOAO_MARK), + PINMUX_GPIO(GPIO_FN_FSIIBSD, FSIIBSD_MARK), + PINMUX_GPIO(GPIO_FN_FSIOBSD, FSIOBSD_MARK), + PINMUX_GPIO(GPIO_FN_FSIIBBCK, FSIIBBCK_MARK), + PINMUX_GPIO(GPIO_FN_FSIIBLRCK, FSIIBLRCK_MARK), + PINMUX_GPIO(GPIO_FN_FSIOBBCK, FSIOBBCK_MARK), + PINMUX_GPIO(GPIO_FN_FSIOBLRCK, FSIOBLRCK_MARK), + PINMUX_GPIO(GPIO_FN_CLKAUDIOBO, CLKAUDIOBO_MARK), + PINMUX_GPIO(GPIO_FN_FSIIASD, FSIIASD_MARK), + + /* AUD */ + PINMUX_GPIO(GPIO_FN_AUDCK, AUDCK_MARK), + PINMUX_GPIO(GPIO_FN_AUDSYNC, AUDSYNC_MARK), + PINMUX_GPIO(GPIO_FN_AUDATA3, AUDATA3_MARK), + PINMUX_GPIO(GPIO_FN_AUDATA2, AUDATA2_MARK), + PINMUX_GPIO(GPIO_FN_AUDATA1, AUDATA1_MARK), + PINMUX_GPIO(GPIO_FN_AUDATA0, AUDATA0_MARK), + + /* VIO */ + PINMUX_GPIO(GPIO_FN_VIO_CKO, VIO_CKO_MARK), + + /* VIO0 */ + PINMUX_GPIO(GPIO_FN_VIO0_D15, VIO0_D15_MARK), + PINMUX_GPIO(GPIO_FN_VIO0_D14, VIO0_D14_MARK), + PINMUX_GPIO(GPIO_FN_VIO0_D13, VIO0_D13_MARK), + PINMUX_GPIO(GPIO_FN_VIO0_D12, VIO0_D12_MARK), + PINMUX_GPIO(GPIO_FN_VIO0_D11, VIO0_D11_MARK), + PINMUX_GPIO(GPIO_FN_VIO0_D10, VIO0_D10_MARK), + PINMUX_GPIO(GPIO_FN_VIO0_D9, VIO0_D9_MARK), + PINMUX_GPIO(GPIO_FN_VIO0_D8, VIO0_D8_MARK), + PINMUX_GPIO(GPIO_FN_VIO0_D7, VIO0_D7_MARK), + PINMUX_GPIO(GPIO_FN_VIO0_D6, VIO0_D6_MARK), + PINMUX_GPIO(GPIO_FN_VIO0_D5, VIO0_D5_MARK), + PINMUX_GPIO(GPIO_FN_VIO0_D4, VIO0_D4_MARK), + PINMUX_GPIO(GPIO_FN_VIO0_D3, VIO0_D3_MARK), + PINMUX_GPIO(GPIO_FN_VIO0_D2, VIO0_D2_MARK), + PINMUX_GPIO(GPIO_FN_VIO0_D1, VIO0_D1_MARK), + PINMUX_GPIO(GPIO_FN_VIO0_D0, VIO0_D0_MARK), + PINMUX_GPIO(GPIO_FN_VIO0_VD, VIO0_VD_MARK), + PINMUX_GPIO(GPIO_FN_VIO0_CLK, VIO0_CLK_MARK), + PINMUX_GPIO(GPIO_FN_VIO0_FLD, VIO0_FLD_MARK), + PINMUX_GPIO(GPIO_FN_VIO0_HD, VIO0_HD_MARK), + + /* VIO1 */ + PINMUX_GPIO(GPIO_FN_VIO1_D7, VIO1_D7_MARK), + PINMUX_GPIO(GPIO_FN_VIO1_D6, VIO1_D6_MARK), + PINMUX_GPIO(GPIO_FN_VIO1_D5, VIO1_D5_MARK), + PINMUX_GPIO(GPIO_FN_VIO1_D4, VIO1_D4_MARK), + PINMUX_GPIO(GPIO_FN_VIO1_D3, VIO1_D3_MARK), + PINMUX_GPIO(GPIO_FN_VIO1_D2, VIO1_D2_MARK), + PINMUX_GPIO(GPIO_FN_VIO1_D1, VIO1_D1_MARK), + PINMUX_GPIO(GPIO_FN_VIO1_D0, VIO1_D0_MARK), + PINMUX_GPIO(GPIO_FN_VIO1_FLD, VIO1_FLD_MARK), + PINMUX_GPIO(GPIO_FN_VIO1_HD, VIO1_HD_MARK), + PINMUX_GPIO(GPIO_FN_VIO1_VD, VIO1_VD_MARK), + PINMUX_GPIO(GPIO_FN_VIO1_CLK, VIO1_CLK_MARK), + + /* Eth */ + PINMUX_GPIO(GPIO_FN_RMII_RXD0, RMII_RXD0_MARK), + PINMUX_GPIO(GPIO_FN_RMII_RXD1, RMII_RXD1_MARK), + PINMUX_GPIO(GPIO_FN_RMII_TXD0, RMII_TXD0_MARK), + PINMUX_GPIO(GPIO_FN_RMII_TXD1, RMII_TXD1_MARK), + PINMUX_GPIO(GPIO_FN_RMII_REF_CLK, RMII_REF_CLK_MARK), + PINMUX_GPIO(GPIO_FN_RMII_TX_EN, RMII_TX_EN_MARK), + PINMUX_GPIO(GPIO_FN_RMII_RX_ER, RMII_RX_ER_MARK), + PINMUX_GPIO(GPIO_FN_RMII_CRS_DV, RMII_CRS_DV_MARK), + PINMUX_GPIO(GPIO_FN_LNKSTA, LNKSTA_MARK), + PINMUX_GPIO(GPIO_FN_MDIO, MDIO_MARK), + PINMUX_GPIO(GPIO_FN_MDC, MDC_MARK), + + /* System */ + PINMUX_GPIO(GPIO_FN_PDSTATUS, PDSTATUS_MARK), + PINMUX_GPIO(GPIO_FN_STATUS2, STATUS2_MARK), + PINMUX_GPIO(GPIO_FN_STATUS0, STATUS0_MARK), + + /* VOU */ + PINMUX_GPIO(GPIO_FN_DV_D15, DV_D15_MARK), + PINMUX_GPIO(GPIO_FN_DV_D14, DV_D14_MARK), + PINMUX_GPIO(GPIO_FN_DV_D13, DV_D13_MARK), + PINMUX_GPIO(GPIO_FN_DV_D12, DV_D12_MARK), + PINMUX_GPIO(GPIO_FN_DV_D11, DV_D11_MARK), + PINMUX_GPIO(GPIO_FN_DV_D10, DV_D10_MARK), + PINMUX_GPIO(GPIO_FN_DV_D9, DV_D9_MARK), + PINMUX_GPIO(GPIO_FN_DV_D8, DV_D8_MARK), + PINMUX_GPIO(GPIO_FN_DV_D7, DV_D7_MARK), + PINMUX_GPIO(GPIO_FN_DV_D6, DV_D6_MARK), + PINMUX_GPIO(GPIO_FN_DV_D5, DV_D5_MARK), + PINMUX_GPIO(GPIO_FN_DV_D4, DV_D4_MARK), + PINMUX_GPIO(GPIO_FN_DV_D3, DV_D3_MARK), + PINMUX_GPIO(GPIO_FN_DV_D2, DV_D2_MARK), + PINMUX_GPIO(GPIO_FN_DV_D1, DV_D1_MARK), + PINMUX_GPIO(GPIO_FN_DV_D0, DV_D0_MARK), + PINMUX_GPIO(GPIO_FN_DV_CLKI, DV_CLKI_MARK), + PINMUX_GPIO(GPIO_FN_DV_CLK, DV_CLK_MARK), + PINMUX_GPIO(GPIO_FN_DV_VSYNC, DV_VSYNC_MARK), + PINMUX_GPIO(GPIO_FN_DV_HSYNC, DV_HSYNC_MARK), + + /* MSIOF0 */ + PINMUX_GPIO(GPIO_FN_MSIOF0_RXD, MSIOF0_RXD_MARK), + PINMUX_GPIO(GPIO_FN_MSIOF0_TXD, MSIOF0_TXD_MARK), + PINMUX_GPIO(GPIO_FN_MSIOF0_MCK, MSIOF0_MCK_MARK), + PINMUX_GPIO(GPIO_FN_MSIOF0_TSCK, MSIOF0_TSCK_MARK), + PINMUX_GPIO(GPIO_FN_MSIOF0_SS1, MSIOF0_SS1_MARK), + PINMUX_GPIO(GPIO_FN_MSIOF0_SS2, MSIOF0_SS2_MARK), + PINMUX_GPIO(GPIO_FN_MSIOF0_TSYNC, MSIOF0_TSYNC_MARK), + PINMUX_GPIO(GPIO_FN_MSIOF0_RSCK, MSIOF0_RSCK_MARK), + PINMUX_GPIO(GPIO_FN_MSIOF0_RSYNC, MSIOF0_RSYNC_MARK), + + /* MSIOF1 */ + PINMUX_GPIO(GPIO_FN_MSIOF1_RXD, MSIOF1_RXD_MARK), + PINMUX_GPIO(GPIO_FN_MSIOF1_TXD, MSIOF1_TXD_MARK), + PINMUX_GPIO(GPIO_FN_MSIOF1_MCK, MSIOF1_MCK_MARK), + PINMUX_GPIO(GPIO_FN_MSIOF1_TSCK, MSIOF1_TSCK_MARK), + PINMUX_GPIO(GPIO_FN_MSIOF1_SS1, MSIOF1_SS1_MARK), + PINMUX_GPIO(GPIO_FN_MSIOF1_SS2, MSIOF1_SS2_MARK), + PINMUX_GPIO(GPIO_FN_MSIOF1_TSYNC, MSIOF1_TSYNC_MARK), + PINMUX_GPIO(GPIO_FN_MSIOF1_RSCK, MSIOF1_RSCK_MARK), + PINMUX_GPIO(GPIO_FN_MSIOF1_RSYNC, MSIOF1_RSYNC_MARK), + + /* DMAC */ + PINMUX_GPIO(GPIO_FN_DMAC_DACK0, DMAC_DACK0_MARK), + PINMUX_GPIO(GPIO_FN_DMAC_DREQ0, DMAC_DREQ0_MARK), + PINMUX_GPIO(GPIO_FN_DMAC_DACK1, DMAC_DACK1_MARK), + PINMUX_GPIO(GPIO_FN_DMAC_DREQ1, DMAC_DREQ1_MARK), + + /* SDHI0 */ + PINMUX_GPIO(GPIO_FN_SDHI0CD, SDHI0CD_MARK), + PINMUX_GPIO(GPIO_FN_SDHI0WP, SDHI0WP_MARK), + PINMUX_GPIO(GPIO_FN_SDHI0CMD, SDHI0CMD_MARK), + PINMUX_GPIO(GPIO_FN_SDHI0CLK, SDHI0CLK_MARK), + PINMUX_GPIO(GPIO_FN_SDHI0D3, SDHI0D3_MARK), + PINMUX_GPIO(GPIO_FN_SDHI0D2, SDHI0D2_MARK), + PINMUX_GPIO(GPIO_FN_SDHI0D1, SDHI0D1_MARK), + PINMUX_GPIO(GPIO_FN_SDHI0D0, SDHI0D0_MARK), + + /* SDHI1 */ + PINMUX_GPIO(GPIO_FN_SDHI1CD, SDHI1CD_MARK), + PINMUX_GPIO(GPIO_FN_SDHI1WP, SDHI1WP_MARK), + PINMUX_GPIO(GPIO_FN_SDHI1CMD, SDHI1CMD_MARK), + PINMUX_GPIO(GPIO_FN_SDHI1CLK, SDHI1CLK_MARK), + PINMUX_GPIO(GPIO_FN_SDHI1D3, SDHI1D3_MARK), + PINMUX_GPIO(GPIO_FN_SDHI1D2, SDHI1D2_MARK), + PINMUX_GPIO(GPIO_FN_SDHI1D1, SDHI1D1_MARK), + PINMUX_GPIO(GPIO_FN_SDHI1D0, SDHI1D0_MARK), + + /* MMC */ + PINMUX_GPIO(GPIO_FN_MMC_D7, MMC_D7_MARK), + PINMUX_GPIO(GPIO_FN_MMC_D6, MMC_D6_MARK), + PINMUX_GPIO(GPIO_FN_MMC_D5, MMC_D5_MARK), + PINMUX_GPIO(GPIO_FN_MMC_D4, MMC_D4_MARK), + PINMUX_GPIO(GPIO_FN_MMC_D3, MMC_D3_MARK), + PINMUX_GPIO(GPIO_FN_MMC_D2, MMC_D2_MARK), + PINMUX_GPIO(GPIO_FN_MMC_D1, MMC_D1_MARK), + PINMUX_GPIO(GPIO_FN_MMC_D0, MMC_D0_MARK), + PINMUX_GPIO(GPIO_FN_MMC_CLK, MMC_CLK_MARK), + PINMUX_GPIO(GPIO_FN_MMC_CMD, MMC_CMD_MARK), + + /* IrDA */ + PINMUX_GPIO(GPIO_FN_IRDA_OUT, IRDA_OUT_MARK), + PINMUX_GPIO(GPIO_FN_IRDA_IN, IRDA_IN_MARK), + + /* TSIF */ + PINMUX_GPIO(GPIO_FN_TSIF_TS0_SDAT, TSIF_TS0_SDAT_MARK), + PINMUX_GPIO(GPIO_FN_TSIF_TS0_SCK, TSIF_TS0_SCK_MARK), + PINMUX_GPIO(GPIO_FN_TSIF_TS0_SDEN, TSIF_TS0_SDEN_MARK), + PINMUX_GPIO(GPIO_FN_TSIF_TS0_SPSYNC, TSIF_TS0_SPSYNC_MARK), + + /* IRQ */ + PINMUX_GPIO(GPIO_FN_INTC_IRQ7, INTC_IRQ7_MARK), + PINMUX_GPIO(GPIO_FN_INTC_IRQ6, INTC_IRQ6_MARK), + PINMUX_GPIO(GPIO_FN_INTC_IRQ5, INTC_IRQ5_MARK), + PINMUX_GPIO(GPIO_FN_INTC_IRQ4, INTC_IRQ4_MARK), + PINMUX_GPIO(GPIO_FN_INTC_IRQ3, INTC_IRQ3_MARK), + PINMUX_GPIO(GPIO_FN_INTC_IRQ2, INTC_IRQ2_MARK), + PINMUX_GPIO(GPIO_FN_INTC_IRQ1, INTC_IRQ1_MARK), + PINMUX_GPIO(GPIO_FN_INTC_IRQ0, INTC_IRQ0_MARK), + }; + +static struct pinmux_cfg_reg pinmux_config_regs[] = { + { PINMUX_CFG_REG("PACR", 0xa4050100, 16, 2) { + PTA7_FN, PTA7_OUT, PTA7_IN_PU, PTA7_IN, + PTA6_FN, PTA6_OUT, PTA6_IN_PU, PTA6_IN, + PTA5_FN, PTA5_OUT, PTA5_IN_PU, PTA5_IN, + PTA4_FN, PTA4_OUT, PTA4_IN_PU, PTA4_IN, + PTA3_FN, PTA3_OUT, PTA3_IN_PU, PTA3_IN, + PTA2_FN, PTA2_OUT, PTA2_IN_PU, PTA2_IN, + PTA1_FN, PTA1_OUT, PTA1_IN_PU, PTA1_IN, + PTA0_FN, PTA0_OUT, PTA0_IN_PU, PTA0_IN } + }, + { PINMUX_CFG_REG("PBCR", 0xa4050102, 16, 2) { + PTB7_FN, PTB7_OUT, PTB7_IN_PU, PTB7_IN, + PTB6_FN, PTB6_OUT, PTB6_IN_PU, PTB6_IN, + PTB5_FN, PTB5_OUT, PTB5_IN_PU, PTB5_IN, + PTB4_FN, PTB4_OUT, PTB4_IN_PU, PTB4_IN, + PTB3_FN, PTB3_OUT, PTB3_IN_PU, PTB3_IN, + PTB2_FN, PTB2_OUT, PTB2_IN_PU, PTB2_IN, + PTB1_FN, PTB1_OUT, PTB1_IN_PU, PTB1_IN, + PTB0_FN, PTB0_OUT, PTB0_IN_PU, PTB0_IN } + }, + { PINMUX_CFG_REG("PCCR", 0xa4050104, 16, 2) { + PTC7_FN, PTC7_OUT, PTC7_IN_PU, PTC7_IN, + PTC6_FN, PTC6_OUT, PTC6_IN_PU, PTC6_IN, + PTC5_FN, PTC5_OUT, PTC5_IN_PU, PTC5_IN, + PTC4_FN, PTC4_OUT, PTC4_IN_PU, PTC4_IN, + PTC3_FN, PTC3_OUT, PTC3_IN_PU, PTC3_IN, + PTC2_FN, PTC2_OUT, PTC2_IN_PU, PTC2_IN, + PTC1_FN, PTC1_OUT, PTC1_IN_PU, PTC1_IN, + PTC0_FN, PTC0_OUT, PTC0_IN_PU, PTC0_IN } + }, + { PINMUX_CFG_REG("PDCR", 0xa4050106, 16, 2) { + PTD7_FN, PTD7_OUT, PTD7_IN_PU, PTD7_IN, + PTD6_FN, PTD6_OUT, PTD6_IN_PU, PTD6_IN, + PTD5_FN, PTD5_OUT, PTD5_IN_PU, PTD5_IN, + PTD4_FN, PTD4_OUT, PTD4_IN_PU, PTD4_IN, + PTD3_FN, PTD3_OUT, PTD3_IN_PU, PTD3_IN, + PTD2_FN, PTD2_OUT, PTD2_IN_PU, PTD2_IN, + PTD1_FN, PTD1_OUT, PTD1_IN_PU, PTD1_IN, + PTD0_FN, PTD0_OUT, PTD0_IN_PU, PTD0_IN } + }, + { PINMUX_CFG_REG("PECR", 0xa4050108, 16, 2) { + PTE7_FN, PTE7_OUT, PTE7_IN_PU, PTE7_IN, + PTE6_FN, PTE6_OUT, PTE6_IN_PU, PTE6_IN, + PTE5_FN, PTE5_OUT, PTE5_IN_PU, PTE5_IN, + PTE4_FN, PTE4_OUT, PTE4_IN_PU, PTE4_IN, + PTE3_FN, PTE3_OUT, PTE3_IN_PU, PTE3_IN, + PTE2_FN, PTE2_OUT, PTE2_IN_PU, PTE2_IN, + PTE1_FN, PTE1_OUT, PTE1_IN_PU, PTE1_IN, + PTE0_FN, PTE0_OUT, PTE0_IN_PU, PTE0_IN } + }, + { PINMUX_CFG_REG("PFCR", 0xa405010a, 16, 2) { + PTF7_FN, PTF7_OUT, PTF7_IN_PU, PTF7_IN, + PTF6_FN, PTF6_OUT, PTF6_IN_PU, PTF6_IN, + PTF5_FN, PTF5_OUT, PTF5_IN_PU, PTF5_IN, + PTF4_FN, PTF4_OUT, PTF4_IN_PU, PTF4_IN, + PTF3_FN, PTF3_OUT, PTF3_IN_PU, PTF3_IN, + PTF2_FN, PTF2_OUT, PTF2_IN_PU, PTF2_IN, + PTF1_FN, PTF1_OUT, PTF1_IN_PU, PTF1_IN, + PTF0_FN, PTF0_OUT, PTF0_IN_PU, PTF0_IN } + }, + { PINMUX_CFG_REG("PGCR", 0xa405010c, 16, 2) { + 0, 0, 0, 0, + 0, 0, 0, 0, + PTG5_FN, PTG5_OUT, 0, 0, + PTG4_FN, PTG4_OUT, 0, 0, + PTG3_FN, PTG3_OUT, 0, 0, + PTG2_FN, PTG2_OUT, 0, 0, + PTG1_FN, PTG1_OUT, 0, 0, + PTG0_FN, PTG0_OUT, 0, 0 } + }, + { PINMUX_CFG_REG("PHCR", 0xa405010e, 16, 2) { + PTH7_FN, PTH7_OUT, PTH7_IN_PU, PTH7_IN, + PTH6_FN, PTH6_OUT, PTH6_IN_PU, PTH6_IN, + PTH5_FN, PTH5_OUT, PTH5_IN_PU, PTH5_IN, + PTH4_FN, PTH4_OUT, PTH4_IN_PU, PTH4_IN, + PTH3_FN, PTH3_OUT, PTH3_IN_PU, PTH3_IN, + PTH2_FN, PTH2_OUT, PTH2_IN_PU, PTH2_IN, + PTH1_FN, PTH1_OUT, PTH1_IN_PU, PTH1_IN, + PTH0_FN, PTH0_OUT, PTH0_IN_PU, PTH0_IN } + }, + { PINMUX_CFG_REG("PJCR", 0xa4050110, 16, 2) { + PTJ7_FN, PTJ7_OUT, 0, 0, + PTJ6_FN, PTJ6_OUT, 0, 0, + PTJ5_FN, PTJ5_OUT, 0, 0, + 0, 0, 0, 0, + PTJ3_FN, PTJ3_OUT, PTJ3_IN_PU, PTJ3_IN, + PTJ2_FN, PTJ2_OUT, PTJ2_IN_PU, PTJ2_IN, + PTJ1_FN, PTJ1_OUT, PTJ1_IN_PU, PTJ1_IN, + PTJ0_FN, PTJ0_OUT, PTJ0_IN_PU, PTJ0_IN } + }, + { PINMUX_CFG_REG("PKCR", 0xa4050112, 16, 2) { + PTK7_FN, PTK7_OUT, PTK7_IN_PU, PTK7_IN, + PTK6_FN, PTK6_OUT, PTK6_IN_PU, PTK6_IN, + PTK5_FN, PTK5_OUT, PTK5_IN_PU, PTK5_IN, + PTK4_FN, PTK4_OUT, PTK4_IN_PU, PTK4_IN, + PTK3_FN, PTK3_OUT, PTK3_IN_PU, PTK3_IN, + PTK2_FN, PTK2_OUT, PTK2_IN_PU, PTK2_IN, + PTK1_FN, PTK1_OUT, PTK1_IN_PU, PTK1_IN, + PTK0_FN, PTK0_OUT, PTK0_IN_PU, PTK0_IN } + }, + { PINMUX_CFG_REG("PLCR", 0xa4050114, 16, 2) { + PTL7_FN, PTL7_OUT, PTL7_IN_PU, PTL7_IN, + PTL6_FN, PTL6_OUT, PTL6_IN_PU, PTL6_IN, + PTL5_FN, PTL5_OUT, PTL5_IN_PU, PTL5_IN, + PTL4_FN, PTL4_OUT, PTL4_IN_PU, PTL4_IN, + PTL3_FN, PTL3_OUT, PTL3_IN_PU, PTL3_IN, + PTL2_FN, PTL2_OUT, PTL2_IN_PU, PTL2_IN, + PTL1_FN, PTL1_OUT, PTL1_IN_PU, PTL1_IN, + PTL0_FN, PTL0_OUT, PTL0_IN_PU, PTL0_IN } + }, + { PINMUX_CFG_REG("PMCR", 0xa4050116, 16, 2) { + PTM7_FN, PTM7_OUT, PTM7_IN_PU, PTM7_IN, + PTM6_FN, PTM6_OUT, PTM6_IN_PU, PTM6_IN, + PTM5_FN, PTM5_OUT, PTM5_IN_PU, PTM5_IN, + PTM4_FN, PTM4_OUT, PTM4_IN_PU, PTM4_IN, + PTM3_FN, PTM3_OUT, PTM3_IN_PU, PTM3_IN, + PTM2_FN, PTM2_OUT, PTM2_IN_PU, PTM2_IN, + PTM1_FN, PTM1_OUT, PTM1_IN_PU, PTM1_IN, + PTM0_FN, PTM0_OUT, PTM0_IN_PU, PTM0_IN } + }, + { PINMUX_CFG_REG("PNCR", 0xa4050118, 16, 2) { + PTN7_FN, PTN7_OUT, PTN7_IN_PU, PTN7_IN, + PTN6_FN, PTN6_OUT, PTN6_IN_PU, PTN6_IN, + PTN5_FN, PTN5_OUT, PTN5_IN_PU, PTN5_IN, + PTN4_FN, PTN4_OUT, PTN4_IN_PU, PTN4_IN, + PTN3_FN, PTN3_OUT, PTN3_IN_PU, PTN3_IN, + PTN2_FN, PTN2_OUT, PTN2_IN_PU, PTN2_IN, + PTN1_FN, PTN1_OUT, PTN1_IN_PU, PTN1_IN, + PTN0_FN, PTN0_OUT, PTN0_IN_PU, PTN0_IN } + }, + { PINMUX_CFG_REG("PQCR", 0xa405011a, 16, 2) { + PTQ7_FN, PTQ7_OUT, PTQ7_IN_PU, PTQ7_IN, + PTQ6_FN, PTQ6_OUT, PTQ6_IN_PU, PTQ6_IN, + PTQ5_FN, PTQ5_OUT, PTQ5_IN_PU, PTQ5_IN, + PTQ4_FN, PTQ4_OUT, PTQ4_IN_PU, PTQ4_IN, + PTQ3_FN, PTQ3_OUT, PTQ3_IN_PU, PTQ3_IN, + PTQ2_FN, PTQ2_OUT, PTQ2_IN_PU, PTQ2_IN, + PTQ1_FN, PTQ1_OUT, PTQ1_IN_PU, PTQ1_IN, + PTQ0_FN, PTQ0_OUT, PTQ0_IN_PU, PTQ0_IN } + }, + { PINMUX_CFG_REG("PRCR", 0xa405011c, 16, 2) { + PTR7_FN, PTR7_OUT, PTR7_IN_PU, PTR7_IN, + PTR6_FN, PTR6_OUT, PTR6_IN_PU, PTR6_IN, + PTR5_FN, PTR5_OUT, PTR5_IN_PU, PTR5_IN, + PTR4_FN, PTR4_OUT, PTR4_IN_PU, PTR4_IN, + PTR3_FN, 0, PTR3_IN_PU, PTR3_IN, + PTR2_FN, 0, PTR2_IN_PU, PTR2_IN, + PTR1_FN, PTR1_OUT, PTR1_IN_PU, PTR1_IN, + PTR0_FN, PTR0_OUT, PTR0_IN_PU, PTR0_IN } + }, + { PINMUX_CFG_REG("PSCR", 0xa405011e, 16, 2) { + 0, 0, 0, 0, + PTS6_FN, PTS6_OUT, PTS6_IN_PU, PTS6_IN, + PTS5_FN, PTS5_OUT, PTS5_IN_PU, PTS5_IN, + PTS4_FN, PTS4_OUT, PTS4_IN_PU, PTS4_IN, + PTS3_FN, PTS3_OUT, PTS3_IN_PU, PTS3_IN, + PTS2_FN, PTS2_OUT, PTS2_IN_PU, PTS2_IN, + PTS1_FN, PTS1_OUT, PTS1_IN_PU, PTS1_IN, + PTS0_FN, PTS0_OUT, PTS0_IN_PU, PTS0_IN } + }, + { PINMUX_CFG_REG("PTCR", 0xa4050140, 16, 2) { + PTT7_FN, PTT7_OUT, PTT7_IN_PU, PTT7_IN, + PTT6_FN, PTT6_OUT, PTT6_IN_PU, PTT6_IN, + PTT5_FN, PTT5_OUT, PTT5_IN_PU, PTT5_IN, + PTT4_FN, PTT4_OUT, PTT4_IN_PU, PTT4_IN, + PTT3_FN, PTT3_OUT, PTT3_IN_PU, PTT3_IN, + PTT2_FN, PTT2_OUT, PTT2_IN_PU, PTT2_IN, + PTT1_FN, PTT1_OUT, PTT1_IN_PU, PTT1_IN, + PTT0_FN, PTT0_OUT, PTT0_IN_PU, PTT0_IN } + }, + { PINMUX_CFG_REG("PUCR", 0xa4050142, 16, 2) { + PTU7_FN, PTU7_OUT, PTU7_IN_PU, PTU7_IN, + PTU6_FN, PTU6_OUT, PTU6_IN_PU, PTU6_IN, + PTU5_FN, PTU5_OUT, PTU5_IN_PU, PTU5_IN, + PTU4_FN, PTU4_OUT, PTU4_IN_PU, PTU4_IN, + PTU3_FN, PTU3_OUT, PTU3_IN_PU, PTU3_IN, + PTU2_FN, PTU2_OUT, PTU2_IN_PU, PTU2_IN, + PTU1_FN, PTU1_OUT, PTU1_IN_PU, PTU1_IN, + PTU0_FN, PTU0_OUT, PTU0_IN_PU, PTU0_IN } + }, + { PINMUX_CFG_REG("PVCR", 0xa4050144, 16, 2) { + PTV7_FN, PTV7_OUT, PTV7_IN_PU, PTV7_IN, + PTV6_FN, PTV6_OUT, PTV6_IN_PU, PTV6_IN, + PTV5_FN, PTV5_OUT, PTV5_IN_PU, PTV5_IN, + PTV4_FN, PTV4_OUT, PTV4_IN_PU, PTV4_IN, + PTV3_FN, PTV3_OUT, PTV3_IN_PU, PTV3_IN, + PTV2_FN, PTV2_OUT, PTV2_IN_PU, PTV2_IN, + PTV1_FN, PTV1_OUT, PTV1_IN_PU, PTV1_IN, + PTV0_FN, PTV0_OUT, PTV0_IN_PU, PTV0_IN } + }, + { PINMUX_CFG_REG("PWCR", 0xa4050146, 16, 2) { + PTW7_FN, PTW7_OUT, PTW7_IN_PU, PTW7_IN, + PTW6_FN, PTW6_OUT, PTW6_IN_PU, PTW6_IN, + PTW5_FN, PTW5_OUT, PTW5_IN_PU, PTW5_IN, + PTW4_FN, PTW4_OUT, PTW4_IN_PU, PTW4_IN, + PTW3_FN, PTW3_OUT, PTW3_IN_PU, PTW3_IN, + PTW2_FN, PTW2_OUT, PTW2_IN_PU, PTW2_IN, + PTW1_FN, PTW1_OUT, PTW1_IN_PU, PTW1_IN, + PTW0_FN, PTW0_OUT, PTW0_IN_PU, PTW0_IN } + }, + { PINMUX_CFG_REG("PXCR", 0xa4050148, 16, 2) { + PTX7_FN, PTX7_OUT, PTX7_IN_PU, PTX7_IN, + PTX6_FN, PTX6_OUT, PTX6_IN_PU, PTX6_IN, + PTX5_FN, PTX5_OUT, PTX5_IN_PU, PTX5_IN, + PTX4_FN, PTX4_OUT, PTX4_IN_PU, PTX4_IN, + PTX3_FN, PTX3_OUT, PTX3_IN_PU, PTX3_IN, + PTX2_FN, PTX2_OUT, PTX2_IN_PU, PTX2_IN, + PTX1_FN, PTX1_OUT, PTX1_IN_PU, PTX1_IN, + PTX0_FN, PTX0_OUT, PTX0_IN_PU, PTX0_IN } + }, + { PINMUX_CFG_REG("PYCR", 0xa405014a, 16, 2) { + PTY7_FN, PTY7_OUT, PTY7_IN_PU, PTY7_IN, + PTY6_FN, PTY6_OUT, PTY6_IN_PU, PTY6_IN, + PTY5_FN, PTY5_OUT, PTY5_IN_PU, PTY5_IN, + PTY4_FN, PTY4_OUT, PTY4_IN_PU, PTY4_IN, + PTY3_FN, PTY3_OUT, PTY3_IN_PU, PTY3_IN, + PTY2_FN, PTY2_OUT, PTY2_IN_PU, PTY2_IN, + PTY1_FN, PTY1_OUT, PTY1_IN_PU, PTY1_IN, + PTY0_FN, PTY0_OUT, PTY0_IN_PU, PTY0_IN } + }, + { PINMUX_CFG_REG("PZCR", 0xa405014c, 16, 2) { + PTZ7_FN, PTZ7_OUT, PTZ7_IN_PU, PTZ7_IN, + PTZ6_FN, PTZ6_OUT, PTZ6_IN_PU, PTZ6_IN, + PTZ5_FN, PTZ5_OUT, PTZ5_IN_PU, PTZ5_IN, + PTZ4_FN, PTZ4_OUT, PTZ4_IN_PU, PTZ4_IN, + PTZ3_FN, PTZ3_OUT, PTZ3_IN_PU, PTZ3_IN, + PTZ2_FN, PTZ2_OUT, PTZ2_IN_PU, PTZ2_IN, + PTZ1_FN, PTZ1_OUT, PTZ1_IN_PU, PTZ1_IN, + PTZ0_FN, PTZ0_OUT, PTZ0_IN_PU, PTZ0_IN } + }, + { PINMUX_CFG_REG("PSELA", 0xa405014e, 16, 1) { + PSA15_0, PSA15_1, + PSA14_0, PSA14_1, + PSA13_0, PSA13_1, + PSA12_0, PSA12_1, + 0, 0, + PSA10_0, PSA10_1, + PSA9_0, PSA9_1, + PSA8_0, PSA8_1, + PSA7_0, PSA7_1, + PSA6_0, PSA6_1, + PSA5_0, PSA5_1, + 0, 0, + PSA3_0, PSA3_1, + PSA2_0, PSA2_1, + PSA1_0, PSA1_1, + PSA0_0, PSA0_1} + }, + { PINMUX_CFG_REG("PSELB", 0xa4050150, 16, 1) { + 0, 0, + PSB14_0, PSB14_1, + PSB13_0, PSB13_1, + PSB12_0, PSB12_1, + PSB11_0, PSB11_1, + PSB10_0, PSB10_1, + PSB9_0, PSB9_1, + PSB8_0, PSB8_1, + PSB7_0, PSB7_1, + PSB6_0, PSB6_1, + PSB5_0, PSB5_1, + PSB4_0, PSB4_1, + PSB3_0, PSB3_1, + PSB2_0, PSB2_1, + PSB1_0, PSB1_1, + PSB0_0, PSB0_1} + }, + { PINMUX_CFG_REG("PSELC", 0xa4050152, 16, 1) { + PSC15_0, PSC15_1, + PSC14_0, PSC14_1, + PSC13_0, PSC13_1, + PSC12_0, PSC12_1, + PSC11_0, PSC11_1, + PSC10_0, PSC10_1, + PSC9_0, PSC9_1, + PSC8_0, PSC8_1, + PSC7_0, PSC7_1, + PSC6_0, PSC6_1, + PSC5_0, PSC5_1, + PSC4_0, PSC4_1, + 0, 0, + PSC2_0, PSC2_1, + PSC1_0, PSC1_1, + PSC0_0, PSC0_1} + }, + { PINMUX_CFG_REG("PSELD", 0xa4050154, 16, 1) { + PSD15_0, PSD15_1, + PSD14_0, PSD14_1, + PSD13_0, PSD13_1, + PSD12_0, PSD12_1, + PSD11_0, PSD11_1, + PSD10_0, PSD10_1, + PSD9_0, PSD9_1, + PSD8_0, PSD8_1, + PSD7_0, PSD7_1, + PSD6_0, PSD6_1, + PSD5_0, PSD5_1, + PSD4_0, PSD4_1, + PSD3_0, PSD3_1, + PSD2_0, PSD2_1, + PSD1_0, PSD1_1, + PSD0_0, PSD0_1} + }, + { PINMUX_CFG_REG("PSELE", 0xa4050156, 16, 1) { + PSE15_0, PSE15_1, + PSE14_0, PSE14_1, + PSE13_0, PSE13_1, + PSE12_0, PSE12_1, + PSE11_0, PSE11_1, + PSE10_0, PSE10_1, + PSE9_0, PSE9_1, + PSE8_0, PSE8_1, + PSE7_0, PSE7_1, + PSE6_0, PSE6_1, + PSE5_0, PSE5_1, + PSE4_0, PSE4_1, + PSE3_0, PSE3_1, + PSE2_0, PSE2_1, + PSE1_0, PSE1_1, + PSE0_0, PSE0_1} + }, + {} +}; + +static struct pinmux_data_reg pinmux_data_regs[] = { + { PINMUX_DATA_REG("PADR", 0xa4050120, 8) { + PTA7_DATA, PTA6_DATA, PTA5_DATA, PTA4_DATA, + PTA3_DATA, PTA2_DATA, PTA1_DATA, PTA0_DATA } + }, + { PINMUX_DATA_REG("PBDR", 0xa4050122, 8) { + PTB7_DATA, PTB6_DATA, PTB5_DATA, PTB4_DATA, + PTB3_DATA, PTB2_DATA, PTB1_DATA, PTB0_DATA } + }, + { PINMUX_DATA_REG("PCDR", 0xa4050124, 8) { + PTC7_DATA, PTC6_DATA, PTC5_DATA, PTC4_DATA, + PTC3_DATA, PTC2_DATA, PTC1_DATA, PTC0_DATA } + }, + { PINMUX_DATA_REG("PDDR", 0xa4050126, 8) { + PTD7_DATA, PTD6_DATA, PTD5_DATA, PTD4_DATA, + PTD3_DATA, PTD2_DATA, PTD1_DATA, PTD0_DATA } + }, + { PINMUX_DATA_REG("PEDR", 0xa4050128, 8) { + PTE7_DATA, PTE6_DATA, PTE5_DATA, PTE4_DATA, + PTE3_DATA, PTE2_DATA, PTE1_DATA, PTE0_DATA } + }, + { PINMUX_DATA_REG("PFDR", 0xa405012a, 8) { + PTF7_DATA, PTF6_DATA, PTF5_DATA, PTF4_DATA, + PTF3_DATA, PTF2_DATA, PTF1_DATA, PTF0_DATA } + }, + { PINMUX_DATA_REG("PGDR", 0xa405012c, 8) { + 0, 0, PTG5_DATA, PTG4_DATA, + PTG3_DATA, PTG2_DATA, PTG1_DATA, PTG0_DATA } + }, + { PINMUX_DATA_REG("PHDR", 0xa405012e, 8) { + PTH7_DATA, PTH6_DATA, PTH5_DATA, PTH4_DATA, + PTH3_DATA, PTH2_DATA, PTH1_DATA, PTH0_DATA } + }, + { PINMUX_DATA_REG("PJDR", 0xa4050130, 8) { + PTJ7_DATA, PTJ6_DATA, PTJ5_DATA, 0, + PTJ3_DATA, PTJ2_DATA, PTJ1_DATA, PTJ0_DATA } + }, + { PINMUX_DATA_REG("PKDR", 0xa4050132, 8) { + PTK7_DATA, PTK6_DATA, PTK5_DATA, PTK4_DATA, + PTK3_DATA, PTK2_DATA, PTK1_DATA, PTK0_DATA } + }, + { PINMUX_DATA_REG("PLDR", 0xa4050134, 8) { + PTL7_DATA, PTL6_DATA, PTL5_DATA, PTL4_DATA, + PTL3_DATA, PTL2_DATA, PTL1_DATA, PTL0_DATA } + }, + { PINMUX_DATA_REG("PMDR", 0xa4050136, 8) { + PTM7_DATA, PTM6_DATA, PTM5_DATA, PTM4_DATA, + PTM3_DATA, PTM2_DATA, PTM1_DATA, PTM0_DATA } + }, + { PINMUX_DATA_REG("PNDR", 0xa4050138, 8) { + PTN7_DATA, PTN6_DATA, PTN5_DATA, PTN4_DATA, + PTN3_DATA, PTN2_DATA, PTN1_DATA, PTN0_DATA } + }, + { PINMUX_DATA_REG("PQDR", 0xa405013a, 8) { + PTQ7_DATA, PTQ6_DATA, PTQ5_DATA, PTQ4_DATA, + PTQ3_DATA, PTQ2_DATA, PTQ1_DATA, PTQ0_DATA } + }, + { PINMUX_DATA_REG("PRDR", 0xa405013c, 8) { + PTR7_DATA, PTR6_DATA, PTR5_DATA, PTR4_DATA, + PTR3_DATA, PTR2_DATA, PTR1_DATA, PTR0_DATA } + }, + { PINMUX_DATA_REG("PSDR", 0xa405013e, 8) { + 0, PTS6_DATA, PTS5_DATA, PTS4_DATA, + PTS3_DATA, PTS2_DATA, PTS1_DATA, PTS0_DATA } + }, + { PINMUX_DATA_REG("PTDR", 0xa4050160, 8) { + PTT7_DATA, PTT6_DATA, PTT5_DATA, PTT4_DATA, + PTT3_DATA, PTT2_DATA, PTT1_DATA, PTT0_DATA } + }, + { PINMUX_DATA_REG("PUDR", 0xa4050162, 8) { + PTU7_DATA, PTU6_DATA, PTU5_DATA, PTU4_DATA, + PTU3_DATA, PTU2_DATA, PTU1_DATA, PTU0_DATA } + }, + { PINMUX_DATA_REG("PVDR", 0xa4050164, 8) { + PTV7_DATA, PTV6_DATA, PTV5_DATA, PTV4_DATA, + PTV3_DATA, PTV2_DATA, PTV1_DATA, PTV0_DATA } + }, + { PINMUX_DATA_REG("PWDR", 0xa4050166, 8) { + PTW7_DATA, PTW6_DATA, PTW5_DATA, PTW4_DATA, + PTW3_DATA, PTW2_DATA, PTW1_DATA, PTW0_DATA } + }, + { PINMUX_DATA_REG("PXDR", 0xa4050168, 8) { + PTX7_DATA, PTX6_DATA, PTX5_DATA, PTX4_DATA, + PTX3_DATA, PTX2_DATA, PTX1_DATA, PTX0_DATA } + }, + { PINMUX_DATA_REG("PYDR", 0xa405016a, 8) { + PTY7_DATA, PTY6_DATA, PTY5_DATA, PTY4_DATA, + PTY3_DATA, PTY2_DATA, PTY1_DATA, PTY0_DATA } + }, + { PINMUX_DATA_REG("PZDR", 0xa405016c, 8) { + PTZ7_DATA, PTZ6_DATA, PTZ5_DATA, PTZ4_DATA, + PTZ3_DATA, PTZ2_DATA, PTZ1_DATA, PTZ0_DATA } + }, + { }, +}; + +static struct pinmux_info sh7724_pinmux_info = { + .name = "sh7724_pfc", + .reserved_id = PINMUX_RESERVED, + .data = { PINMUX_DATA_BEGIN, PINMUX_DATA_END }, + .input = { PINMUX_INPUT_BEGIN, PINMUX_INPUT_END }, + .input_pu = { PINMUX_INPUT_PULLUP_BEGIN, PINMUX_INPUT_PULLUP_END }, + .output = { PINMUX_OUTPUT_BEGIN, PINMUX_OUTPUT_END }, + .mark = { PINMUX_MARK_BEGIN, PINMUX_MARK_END }, + .function = { PINMUX_FUNCTION_BEGIN, PINMUX_FUNCTION_END }, + + .first_gpio = GPIO_PTA7, + .last_gpio = GPIO_FN_INTC_IRQ0, + + .gpios = pinmux_gpios, + .cfg_regs = pinmux_config_regs, + .data_regs = pinmux_data_regs, + + .gpio_data = pinmux_data, + .gpio_data_size = ARRAY_SIZE(pinmux_data), +}; + +static int __init plat_pinmux_setup(void) +{ + return register_pinmux(&sh7724_pinmux_info); +} +arch_initcall(plat_pinmux_setup); diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7724.c b/arch/sh/kernel/cpu/sh4a/setup-sh7724.c new file mode 100644 index 0000000..4327b1e --- /dev/null +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7724.c @@ -0,0 +1,371 @@ +/* + * SH7724 Setup + * + * Copyright (C) 2009 Renesas Solutions Corp. + * + * Kuninori Morimoto + * + * Based on SH7723 Setup + * Copyright (C) 2008 Paul Mundt + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* Serial */ +static struct plat_sci_port sci_platform_data[] = { + { + .mapbase = 0xffe00000, + .flags = UPF_BOOT_AUTOCONF, + .type = PORT_SCIF, + .irqs = { 80, 80, 80, 80 }, + }, { + .mapbase = 0xffe10000, + .flags = UPF_BOOT_AUTOCONF, + .type = PORT_SCIF, + .irqs = { 81, 81, 81, 81 }, + }, { + .mapbase = 0xffe20000, + .flags = UPF_BOOT_AUTOCONF, + .type = PORT_SCIF, + .irqs = { 82, 82, 82, 82 }, + }, { + .mapbase = 0xa4e30000, + .flags = UPF_BOOT_AUTOCONF, + .type = PORT_SCIFA, + .irqs = { 56, 56, 56, 56 }, + }, { + .mapbase = 0xa4e40000, + .flags = UPF_BOOT_AUTOCONF, + .type = PORT_SCIFA, + .irqs = { 88, 88, 88, 88 }, + }, { + .mapbase = 0xa4e50000, + .flags = UPF_BOOT_AUTOCONF, + .type = PORT_SCIFA, + .irqs = { 109, 109, 109, 109 }, + }, { + .flags = 0, + } +}; + +static struct platform_device sci_device = { + .name = "sh-sci", + .id = -1, + .dev = { + .platform_data = sci_platform_data, + }, +}; + +/* RTC */ +static struct resource rtc_resources[] = { + [0] = { + .start = 0xa465fec0, + .end = 0xa465fec0 + 0x58 - 1, + .flags = IORESOURCE_IO, + }, + [1] = { + /* Period IRQ */ + .start = 69, + .flags = IORESOURCE_IRQ, + }, + [2] = { + /* Carry IRQ */ + .start = 70, + .flags = IORESOURCE_IRQ, + }, + [3] = { + /* Alarm IRQ */ + .start = 68, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device rtc_device = { + .name = "sh-rtc", + .id = -1, + .num_resources = ARRAY_SIZE(rtc_resources), + .resource = rtc_resources, +}; + +static struct platform_device *sh7724_devices[] __initdata = { + &sci_device, + &rtc_device, +}; + +static int __init sh7724_devices_setup(void) +{ + clk_always_enable("rtc0"); /* RTC */ + + return platform_add_devices(sh7724_devices, + ARRAY_SIZE(sh7724_devices)); +} +device_initcall(sh7724_devices_setup); + +enum { + UNUSED = 0, + + /* interrupt sources */ + IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7, + HUDI, + DMAC1A_DEI0, DMAC1A_DEI1, DMAC1A_DEI2, DMAC1A_DEI3, + _2DG_TRI, _2DG_INI, _2DG_CEI, _2DG_BRK, + DMAC0A_DEI0, DMAC0A_DEI1, DMAC0A_DEI2, DMAC0A_DEI3, + VIO_CEU20I, VIO_BEU20I, VIO_VEU3F1, VIO_VOUI, + SCIFA_SCIFA0, + VPU_VPUI, + TPU_TPUI, + CEU21I, + BEU21I, + USB_USI0, + ATAPI, + RTC_ATI, RTC_PRI, RTC_CUI, + DMAC1B_DEI4, DMAC1B_DEI5, DMAC1B_DADERR, + DMAC0B_DEI4, DMAC0B_DEI5, DMAC0B_DADERR, + KEYSC_KEYI, + SCIF_SCIF0, SCIF_SCIF1, SCIF_SCIF2, + VEU3F0I, + MSIOF_MSIOFI0, MSIOF_MSIOFI1, + SPU_SPUI0, SPU_SPUI1, + SCIFA_SCIFA1, +/* ICB_ICBI, */ + ETHI, + I2C1_ALI, I2C1_TACKI, I2C1_WAITI, I2C1_DTEI, + I2C0_ALI, I2C0_TACKI, I2C0_WAITI, I2C0_DTEI, + SDHI0_SDHII0, SDHI0_SDHII1, SDHI0_SDHII2, + CMT_CMTI, + TSIF_TSIFI, +/* ICB_LMBI, */ + FSI_FSI, + SCIFA_SCIFA2, + TMU0_TUNI0, TMU0_TUNI1, TMU0_TUNI2, + IRDA_IRDAI, + SDHI1_SDHII0, SDHI1_SDHII1, SDHI1_SDHII2, + JPU_JPUI, + MMC_MMCI0, MMC_MMCI1, MMC_MMCI2, + LCDC_LCDCI, + TMU1_TUNI0, TMU1_TUNI1, TMU1_TUNI2, + + /* interrupt groups */ + DMAC1A, _2DG, DMAC0A, VIO, RTC, + DMAC1B, DMAC0B, I2C0, I2C1, SDHI0, SDHI1, SPU, MMC, +}; + +static struct intc_vect vectors[] __initdata = { + INTC_VECT(IRQ0, 0x600), INTC_VECT(IRQ1, 0x620), + INTC_VECT(IRQ2, 0x640), INTC_VECT(IRQ3, 0x660), + INTC_VECT(IRQ4, 0x680), INTC_VECT(IRQ5, 0x6a0), + INTC_VECT(IRQ6, 0x6c0), INTC_VECT(IRQ7, 0x6e0), + + INTC_VECT(DMAC1A_DEI0, 0x700), + INTC_VECT(DMAC1A_DEI1, 0x720), + INTC_VECT(DMAC1A_DEI2, 0x740), + INTC_VECT(DMAC1A_DEI3, 0x760), + + INTC_VECT(_2DG_TRI, 0x780), + INTC_VECT(_2DG_INI, 0x7A0), + INTC_VECT(_2DG_CEI, 0x7C0), + INTC_VECT(_2DG_BRK, 0x7E0), + + INTC_VECT(DMAC0A_DEI0, 0x800), + INTC_VECT(DMAC0A_DEI1, 0x820), + INTC_VECT(DMAC0A_DEI2, 0x840), + INTC_VECT(DMAC0A_DEI3, 0x860), + + INTC_VECT(VIO_CEU20I, 0x880), + INTC_VECT(VIO_BEU20I, 0x8A0), + INTC_VECT(VIO_VEU3F1, 0x8C0), + INTC_VECT(VIO_VOUI, 0x8E0), + + INTC_VECT(SCIFA_SCIFA0, 0x900), + INTC_VECT(VPU_VPUI, 0x980), + INTC_VECT(TPU_TPUI, 0x9A0), + INTC_VECT(CEU21I, 0x9E0), + INTC_VECT(BEU21I, 0xA00), + INTC_VECT(USB_USI0, 0xA20), + INTC_VECT(ATAPI, 0xA60), + + INTC_VECT(RTC_ATI, 0xA80), + INTC_VECT(RTC_PRI, 0xAA0), + INTC_VECT(RTC_CUI, 0xAC0), + + INTC_VECT(DMAC1B_DEI4, 0xB00), + INTC_VECT(DMAC1B_DEI5, 0xB20), + INTC_VECT(DMAC1B_DADERR, 0xB40), + + INTC_VECT(DMAC0B_DEI4, 0xB80), + INTC_VECT(DMAC0B_DEI5, 0xBA0), + INTC_VECT(DMAC0B_DADERR, 0xBC0), + + INTC_VECT(KEYSC_KEYI, 0xBE0), + INTC_VECT(SCIF_SCIF0, 0xC00), + INTC_VECT(SCIF_SCIF1, 0xC20), + INTC_VECT(SCIF_SCIF2, 0xC40), + INTC_VECT(VEU3F0I, 0xC60), + INTC_VECT(MSIOF_MSIOFI0, 0xC80), + INTC_VECT(MSIOF_MSIOFI1, 0xCA0), + INTC_VECT(SPU_SPUI0, 0xCC0), + INTC_VECT(SPU_SPUI1, 0xCE0), + INTC_VECT(SCIFA_SCIFA1, 0xD00), + +/* INTC_VECT(ICB_ICBI, 0xD20), */ + INTC_VECT(ETHI, 0xD60), + + INTC_VECT(I2C1_ALI, 0xD80), + INTC_VECT(I2C1_TACKI, 0xDA0), + INTC_VECT(I2C1_WAITI, 0xDC0), + INTC_VECT(I2C1_DTEI, 0xDE0), + + INTC_VECT(I2C0_ALI, 0xE00), + INTC_VECT(I2C0_TACKI, 0xE20), + INTC_VECT(I2C0_WAITI, 0xE40), + INTC_VECT(I2C0_DTEI, 0xE60), + + INTC_VECT(SDHI0_SDHII0, 0xE80), + INTC_VECT(SDHI0_SDHII1, 0xEA0), + INTC_VECT(SDHI0_SDHII2, 0xEC0), + + INTC_VECT(CMT_CMTI, 0xF00), + INTC_VECT(TSIF_TSIFI, 0xF20), +/* INTC_VECT(ICB_LMBI, 0xF60), */ + INTC_VECT(FSI_FSI, 0xF80), + INTC_VECT(SCIFA_SCIFA2, 0xFA0), + + INTC_VECT(TMU0_TUNI0, 0x400), + INTC_VECT(TMU0_TUNI1, 0x420), + INTC_VECT(TMU0_TUNI2, 0x440), + + INTC_VECT(IRDA_IRDAI, 0x480), + + INTC_VECT(SDHI1_SDHII0, 0x4E0), + INTC_VECT(SDHI1_SDHII1, 0x500), + INTC_VECT(SDHI1_SDHII2, 0x520), + + INTC_VECT(JPU_JPUI, 0x560), + + INTC_VECT(MMC_MMCI0, 0x580), + INTC_VECT(MMC_MMCI1, 0x5A0), + INTC_VECT(MMC_MMCI2, 0x5C0), + + INTC_VECT(LCDC_LCDCI, 0xF40), + + INTC_VECT(TMU1_TUNI0, 0x920), + INTC_VECT(TMU1_TUNI1, 0x940), + INTC_VECT(TMU1_TUNI2, 0x960), +}; + +static struct intc_group groups[] __initdata = { + INTC_GROUP(DMAC1A, DMAC1A_DEI0, DMAC1A_DEI1, DMAC1A_DEI2, DMAC1A_DEI3), + INTC_GROUP(_2DG, _2DG_TRI, _2DG_INI, _2DG_CEI, _2DG_BRK), + INTC_GROUP(DMAC0A, DMAC0A_DEI0, DMAC0A_DEI1, DMAC0A_DEI2, DMAC0A_DEI3), + INTC_GROUP(VIO, VIO_CEU20I, VIO_BEU20I, VIO_VEU3F1, VIO_VOUI), + INTC_GROUP(RTC, RTC_ATI, RTC_PRI, RTC_CUI), + INTC_GROUP(DMAC1B, DMAC1B_DEI4, DMAC1B_DEI5, DMAC1B_DADERR), + INTC_GROUP(DMAC0B, DMAC0B_DEI4, DMAC0B_DEI5, DMAC0B_DADERR), + INTC_GROUP(I2C0, I2C0_ALI, I2C0_TACKI, I2C0_WAITI, I2C0_DTEI), + INTC_GROUP(I2C1, I2C1_ALI, I2C1_TACKI, I2C1_WAITI, I2C1_DTEI), + INTC_GROUP(SDHI0, SDHI0_SDHII0, SDHI0_SDHII1, SDHI0_SDHII2), + INTC_GROUP(SDHI1, SDHI1_SDHII0, SDHI1_SDHII1, SDHI1_SDHII2), + INTC_GROUP(SPU, SPU_SPUI0, SPU_SPUI1), + INTC_GROUP(MMC, MMC_MMCI0, MMC_MMCI1, MMC_MMCI2), +}; + +/* FIXMEEEEEEEEEEEEEEEEEEE !!!!! */ +/* very bad manual !! */ +static struct intc_mask_reg mask_registers[] __initdata = { + { 0xa4080080, 0xa40800c0, 8, /* IMR0 / IMCR0 */ + { 0, TMU1_TUNI2, TMU1_TUNI1, TMU1_TUNI0, + /*SDHII3?*/0, SDHI1_SDHII2, SDHI1_SDHII1, SDHI1_SDHII0 } }, + { 0xa4080084, 0xa40800c4, 8, /* IMR1 / IMCR1 */ + { VIO_VOUI, VIO_VEU3F1, VIO_BEU20I, VIO_CEU20I, + DMAC0A_DEI3, DMAC0A_DEI2, DMAC0A_DEI1, DMAC0A_DEI0 } }, + { 0xa4080088, 0xa40800c8, 8, /* IMR2 / IMCR2 */ + { 0, 0, 0, VPU_VPUI, ATAPI, ETHI, 0, /*SCIFA3*/SCIFA_SCIFA0 } }, + { 0xa408008c, 0xa40800cc, 8, /* IMR3 / IMCR3 */ + { DMAC1A_DEI3, DMAC1A_DEI2, DMAC1A_DEI1, DMAC1A_DEI0, + SPU_SPUI1, SPU_SPUI0, BEU21I, IRDA_IRDAI } }, + { 0xa4080090, 0xa40800d0, 8, /* IMR4 / IMCR4 */ + { 0, TMU0_TUNI2, TMU0_TUNI1, TMU0_TUNI0, + JPU_JPUI, 0, 0, LCDC_LCDCI } }, + { 0xa4080094, 0xa40800d4, 8, /* IMR5 / IMCR5 */ + { KEYSC_KEYI, DMAC0B_DADERR, DMAC0B_DEI5, DMAC0B_DEI4, + VEU3F0I, SCIF_SCIF2, SCIF_SCIF1, SCIF_SCIF0 } }, + { 0xa4080098, 0xa40800d8, 8, /* IMR6 / IMCR6 */ + { 0, 0, /*ICB_ICBI*/0, /*SCIFA4*/SCIFA_SCIFA1, + CEU21I, 0, MSIOF_MSIOFI1, MSIOF_MSIOFI0 } }, + { 0xa408009c, 0xa40800dc, 8, /* IMR7 / IMCR7 */ + { I2C0_DTEI, I2C0_WAITI, I2C0_TACKI, I2C0_ALI, + I2C1_DTEI, I2C1_WAITI, I2C1_TACKI, I2C1_ALI } }, + { 0xa40800a0, 0xa40800e0, 8, /* IMR8 / IMCR8 */ + { /*SDHII3*/0, SDHI0_SDHII2, SDHI0_SDHII1, SDHI0_SDHII0, + 0, 0, /*SCIFA5*/SCIFA_SCIFA2, FSI_FSI } }, + { 0xa40800a4, 0xa40800e4, 8, /* IMR9 / IMCR9 */ + { 0, 0, 0, CMT_CMTI, 0, /*USB1*/0, USB_USI0, 0 } }, + { 0xa40800a8, 0xa40800e8, 8, /* IMR10 / IMCR10 */ + { 0, DMAC1B_DADERR, DMAC1B_DEI5, DMAC1B_DEI4, + 0, RTC_ATI, RTC_PRI, RTC_CUI } }, + { 0xa40800ac, 0xa40800ec, 8, /* IMR11 / IMCR11 */ + { _2DG_BRK, _2DG_CEI, _2DG_INI, _2DG_TRI, + 0, TPU_TPUI, /*ICB_LMBI*/0, TSIF_TSIFI } }, + { 0xa40800b0, 0xa40800f0, 8, /* IMR12 / IMCR12 */ + { 0, 0, 0, 0, 0, 0, 0, 0/*2DDMAC*/ } }, + { 0xa4140044, 0xa4140064, 8, /* INTMSK00 / INTMSKCLR00 */ + { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } }, +}; + +static struct intc_prio_reg prio_registers[] __initdata = { + { 0xa4080000, 0, 16, 4, /* IPRA */ { TMU0_TUNI0, TMU0_TUNI1, + TMU0_TUNI2, IRDA_IRDAI } }, + { 0xa4080004, 0, 16, 4, /* IPRB */ { JPU_JPUI, LCDC_LCDCI, + DMAC1A, BEU21I } }, + { 0xa4080008, 0, 16, 4, /* IPRC */ { TMU1_TUNI0, TMU1_TUNI1, + TMU1_TUNI2, SPU } }, + { 0xa408000c, 0, 16, 4, /* IPRD */ { 0, MMC, 0, ATAPI } }, + { 0xa4080010, 0, 16, 4, /* IPRE */ + { DMAC0A, /*BEU?VEU?*/VIO, /*SCIFA3*/SCIFA_SCIFA0, /*VPU5F*/ + VPU_VPUI } }, + { 0xa4080014, 0, 16, 4, /* IPRF */ { KEYSC_KEYI, DMAC0B, + USB_USI0, CMT_CMTI } }, + { 0xa4080018, 0, 16, 4, /* IPRG */ { SCIF_SCIF0, SCIF_SCIF1, + SCIF_SCIF2, VEU3F0I } }, + { 0xa408001c, 0, 16, 4, /* IPRH */ { MSIOF_MSIOFI0, MSIOF_MSIOFI1, + I2C1, I2C0 } }, + { 0xa4080020, 0, 16, 4, /* IPRI */ { /*SCIFA4*/SCIFA_SCIFA1, /*ICB*/0, + TSIF_TSIFI, _2DG/*ICB?*/ } }, + { 0xa4080024, 0, 16, 4, /* IPRJ */ { CEU21I, ETHI, FSI_FSI, SDHI1 } }, + { 0xa4080028, 0, 16, 4, /* IPRK */ { RTC, DMAC1B, /*ICB?*/0, SDHI0 } }, + { 0xa408002c, 0, 16, 4, /* IPRL */ { /*SCIFA5*/SCIFA_SCIFA2, 0, + TPU_TPUI, /*2DDMAC*/0 } }, + { 0xa4140010, 0, 32, 4, /* INTPRI00 */ + { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } }, +}; + +static struct intc_sense_reg sense_registers[] __initdata = { + { 0xa414001c, 16, 2, /* ICR1 */ + { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } }, +}; + +static struct intc_mask_reg ack_registers[] __initdata = { + { 0xa4140024, 0, 8, /* INTREQ00 */ + { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } }, +}; + +static DECLARE_INTC_DESC_ACK(intc_desc, "sh7724", vectors, groups, + mask_registers, prio_registers, sense_registers, + ack_registers); + +void __init plat_irq_setup(void) +{ + register_intc_controller(&intc_desc); +} diff --git a/arch/sh/kernel/setup.c b/arch/sh/kernel/setup.c index 04a6004..0e6ed80 100644 --- a/arch/sh/kernel/setup.c +++ b/arch/sh/kernel/setup.c @@ -435,7 +435,8 @@ static const char *cpu_name[] = { [CPU_SH7722] = "SH7722", [CPU_SHX3] = "SH-X3", [CPU_SH5_101] = "SH5-101", [CPU_SH5_103] = "SH5-103", [CPU_MXG] = "MX-G", [CPU_SH7723] = "SH7723", - [CPU_SH7366] = "SH7366", [CPU_SH_NONE] = "Unknown" + [CPU_SH7366] = "SH7366", [CPU_SH7724] = "SH7724", + [CPU_SH_NONE] = "Unknown" }; const char *get_cpu_subtype(struct sh_cpuinfo *c) diff --git a/arch/sh/oprofile/common.c b/arch/sh/oprofile/common.c index 1b9d430..44f4e31 100644 --- a/arch/sh/oprofile/common.c +++ b/arch/sh/oprofile/common.c @@ -109,6 +109,7 @@ int __init oprofile_arch_init(struct oprofile_operations *ops) case CPU_SH7785: case CPU_SH7786: case CPU_SH7723: + case CPU_SH7724: case CPU_SHX3: lmodel = &op_model_sh4a_ops; break; -- cgit v0.10.2 From 47948d2bd6d27648a107a27357b3bc5ad054ff64 Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Wed, 15 Apr 2009 11:42:47 +0900 Subject: serial: sh-sci: SH7724 support. Signed-off-by: Kuninori Morimoto Signed-off-by: Paul Mundt diff --git a/drivers/serial/sh-sci.h b/drivers/serial/sh-sci.h index d0aa82d..84cc651 100644 --- a/drivers/serial/sh-sci.h +++ b/drivers/serial/sh-sci.h @@ -91,6 +91,9 @@ # define SCSPTR5 0xa4050128 # define SCIF_ORER 0x0001 /* overrun error bit */ # define SCSCR_INIT(port) 0x0038 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */ +#elif defined(CONFIG_CPU_SUBTYPE_SH7724) +# define SCIF_ORER 0x0001 /* overrun error bit */ +# define SCSCR_INIT(port) 0x0038 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */ #elif defined(CONFIG_CPU_SUBTYPE_SH4_202) # define SCSPTR2 0xffe80020 /* 16 bit SCIF */ # define SCIF_ORER 0x0001 /* overrun error bit */ @@ -361,7 +364,8 @@ h8_sci_offset, h8_sci_size) \ CPU_SCI_FNS(name, h8_sci_offset, h8_sci_size) #define SCIF_FNS(name, sh3_scif_offset, sh3_scif_size, sh4_scif_offset, sh4_scif_size) -#elif defined(CONFIG_CPU_SUBTYPE_SH7723) +#elif defined(CONFIG_CPU_SUBTYPE_SH7723) ||\ + defined(CONFIG_CPU_SUBTYPE_SH7724) #define SCIx_FNS(name, sh4_scifa_offset, sh4_scifa_size, sh4_scif_offset, sh4_scif_size) \ CPU_SCIx_FNS(name, sh4_scifa_offset, sh4_scifa_size, sh4_scif_offset, sh4_scif_size) #define SCIF_FNS(name, sh4_scif_offset, sh4_scif_size) \ @@ -390,7 +394,8 @@ SCIF_FNS(SCFDR, 0x1c, 16) SCIF_FNS(SCxTDR, 0x20, 8) SCIF_FNS(SCxRDR, 0x24, 8) SCIF_FNS(SCLSR, 0x24, 16) -#elif defined(CONFIG_CPU_SUBTYPE_SH7723) +#elif defined(CONFIG_CPU_SUBTYPE_SH7723) ||\ + defined(CONFIG_CPU_SUBTYPE_SH7724) SCIx_FNS(SCSMR, 0x00, 16, 0x00, 16) SCIx_FNS(SCBRR, 0x04, 8, 0x04, 8) SCIx_FNS(SCSCR, 0x08, 16, 0x08, 16) @@ -604,6 +609,17 @@ static inline int sci_rxd_in(struct uart_port *port) return ctrl_inb(SCSPTR5) & 0x0008 ? 1 : 0; /* SCIF5 */ return 1; } +#elif defined(CONFIG_CPU_SUBTYPE_SH7724) +# define SCFSR 0x0010 +# define SCASSR 0x0014 +static inline int sci_rxd_in(struct uart_port *port) +{ + if (port->type == PORT_SCIF) + return ctrl_inw((port->mapbase + SCFSR)) & SCIF_BRK ? 1 : 0; + if (port->type == PORT_SCIFA) + return ctrl_inw((port->mapbase + SCASSR)) & SCIF_BRK ? 1 : 0; + return 1; +} #elif defined(CONFIG_CPU_SUBTYPE_SH5_101) || defined(CONFIG_CPU_SUBTYPE_SH5_103) static inline int sci_rxd_in(struct uart_port *port) { @@ -757,7 +773,8 @@ static inline int sci_rxd_in(struct uart_port *port) defined(CONFIG_CPU_SUBTYPE_SH7720) || \ defined(CONFIG_CPU_SUBTYPE_SH7721) #define SCBRR_VALUE(bps, clk) (((clk*2)+16*bps)/(32*bps)-1) -#elif defined(CONFIG_CPU_SUBTYPE_SH7723) +#elif defined(CONFIG_CPU_SUBTYPE_SH7723) ||\ + defined(CONFIG_CPU_SUBTYPE_SH7724) static inline int scbrr_calc(struct uart_port *port, int bps, int clk) { if (port->type == PORT_SCIF) -- cgit v0.10.2 From 40c7e8be556715079d0a9d7454ceb5371a2f0b39 Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Thu, 16 Apr 2009 13:16:07 +0900 Subject: sh: sh7724: Add I2C support. This adds support for the SH-Mobile I2C controller on the SH7724. Signed-off-by: Kuninori Morimoto Signed-off-by: Paul Mundt diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7724.c b/arch/sh/kernel/cpu/sh4a/setup-sh7724.c index 4327b1e..f17eda6 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7724.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7724.c @@ -99,9 +99,55 @@ static struct platform_device rtc_device = { .resource = rtc_resources, }; +/* I2C0 */ +static struct resource iic0_resources[] = { + [0] = { + .name = "IIC0", + .start = 0x04470000, + .end = 0x04470018 - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 96, + .end = 99, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device iic0_device = { + .name = "i2c-sh_mobile", + .id = 0, /* "i2c0" clock */ + .num_resources = ARRAY_SIZE(iic0_resources), + .resource = iic0_resources, +}; + +/* I2C1 */ +static struct resource iic1_resources[] = { + [0] = { + .name = "IIC1", + .start = 0x04750000, + .end = 0x04750018 - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 92, + .end = 95, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device iic1_device = { + .name = "i2c-sh_mobile", + .id = 1, /* "i2c1" clock */ + .num_resources = ARRAY_SIZE(iic1_resources), + .resource = iic1_resources, +}; + static struct platform_device *sh7724_devices[] __initdata = { &sci_device, &rtc_device, + &iic0_device, + &iic1_device, }; static int __init sh7724_devices_setup(void) -- cgit v0.10.2 From cd5b9ef776feff440e7a889d1a565ceabfecbfa1 Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Wed, 15 Apr 2009 11:43:03 +0900 Subject: sh: sh7724: Add VPU support. This adds uio_pdrv_genirq support for the VPU. Signed-off-by: Kuninori Morimoto Signed-off-by: Paul Mundt diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7724.c b/arch/sh/kernel/cpu/sh4a/setup-sh7724.c index f17eda6..499a6fc 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7724.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7724.c @@ -143,16 +143,49 @@ static struct platform_device iic1_device = { .resource = iic1_resources, }; +/* VPU */ +static struct uio_info vpu_platform_data = { + .name = "VPU5F", + .version = "0", + .irq = 60, +}; + +static struct resource vpu_resources[] = { + [0] = { + .name = "VPU", + .start = 0xfe900000, + .end = 0xfe902807, + .flags = IORESOURCE_MEM, + }, + [1] = { + /* place holder for contiguous memory */ + }, +}; + +static struct platform_device vpu_device = { + .name = "uio_pdrv_genirq", + .id = 0, + .dev = { + .platform_data = &vpu_platform_data, + }, + .resource = vpu_resources, + .num_resources = ARRAY_SIZE(vpu_resources), +}; + static struct platform_device *sh7724_devices[] __initdata = { &sci_device, &rtc_device, &iic0_device, &iic1_device, + &vpu_device, }; static int __init sh7724_devices_setup(void) { clk_always_enable("rtc0"); /* RTC */ + clk_always_enable("vpu0"); /* VPU */ + + platform_resource_setup_memory(&vpu_device, "vpu", 2 << 20); return platform_add_devices(sh7724_devices, ARRAY_SIZE(sh7724_devices)); -- cgit v0.10.2 From ad95b78c9f735da11ff9ec760e9b038cd82aead6 Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Wed, 15 Apr 2009 11:43:07 +0900 Subject: sh: sh7724: Add VEU support. This adds uio_pdrv_genirq support for the VEU. Signed-off-by: Kuninori Morimoto Signed-off-by: Paul Mundt diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7724.c b/arch/sh/kernel/cpu/sh4a/setup-sh7724.c index 499a6fc..65570ed 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7724.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7724.c @@ -172,20 +172,84 @@ static struct platform_device vpu_device = { .num_resources = ARRAY_SIZE(vpu_resources), }; +/* VEU0 */ +static struct uio_info veu0_platform_data = { + .name = "VEU3F0", + .version = "0", + .irq = 83, +}; + +static struct resource veu0_resources[] = { + [0] = { + .name = "VEU3F0", + .start = 0xfe920000, + .end = 0xfe9200cb - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + /* place holder for contiguous memory */ + }, +}; + +static struct platform_device veu0_device = { + .name = "uio_pdrv_genirq", + .id = 1, + .dev = { + .platform_data = &veu0_platform_data, + }, + .resource = veu0_resources, + .num_resources = ARRAY_SIZE(veu0_resources), +}; + +/* VEU1 */ +static struct uio_info veu1_platform_data = { + .name = "VEU3F1", + .version = "0", + .irq = 54, +}; + +static struct resource veu1_resources[] = { + [0] = { + .name = "VEU3F1", + .start = 0xfe924000, + .end = 0xfe9240cb - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + /* place holder for contiguous memory */ + }, +}; + +static struct platform_device veu1_device = { + .name = "uio_pdrv_genirq", + .id = 2, + .dev = { + .platform_data = &veu1_platform_data, + }, + .resource = veu1_resources, + .num_resources = ARRAY_SIZE(veu1_resources), +}; + static struct platform_device *sh7724_devices[] __initdata = { &sci_device, &rtc_device, &iic0_device, &iic1_device, &vpu_device, + &veu0_device, + &veu1_device, }; static int __init sh7724_devices_setup(void) { clk_always_enable("rtc0"); /* RTC */ clk_always_enable("vpu0"); /* VPU */ + clk_always_enable("veu1"); /* VEU3F1 */ + clk_always_enable("veu0"); /* VEU3F0 */ platform_resource_setup_memory(&vpu_device, "vpu", 2 << 20); + platform_resource_setup_memory(&veu0_device, "veu0", 2 << 20); + platform_resource_setup_memory(&veu1_device, "veu1", 2 << 20); return platform_add_devices(sh7724_devices, ARRAY_SIZE(sh7724_devices)); -- cgit v0.10.2 From 6a3395beb99d7ae882ddf701c6fa6005ad7edebf Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Thu, 16 Apr 2009 15:36:13 +0900 Subject: sh: sh7724: Add CMT clockevents support. This enables support for the CMT clockevents driver on SH7724. Signed-off-by: Paul Mundt diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7724.c b/arch/sh/kernel/cpu/sh4a/setup-sh7724.c index 65570ed..8b87ba8 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7724.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7724.c @@ -230,7 +230,40 @@ static struct platform_device veu1_device = { .num_resources = ARRAY_SIZE(veu1_resources), }; +static struct sh_cmt_config cmt_platform_data = { + .name = "CMT", + .channel_offset = 0x60, + .timer_bit = 5, + .clk = "cmt0", + .clockevent_rating = 125, + .clocksource_rating = 200, +}; + +static struct resource cmt_resources[] = { + [0] = { + .name = "CMT", + .start = 0x044a0060, + .end = 0x044a006b, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 104, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device cmt_device = { + .name = "sh_cmt", + .id = 0, + .dev = { + .platform_data = &cmt_platform_data, + }, + .resource = cmt_resources, + .num_resources = ARRAY_SIZE(cmt_resources), +}; + static struct platform_device *sh7724_devices[] __initdata = { + &cmt_device, &sci_device, &rtc_device, &iic0_device, -- cgit v0.10.2 From 59fe700dcbf3d6257ae86ca8c0192fc64b2eea1c Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Thu, 16 Apr 2009 15:43:42 +0900 Subject: sh: Have SH7724 select ARCH_SHMOBILE. This is an SH-Mobile CPU, so select ARCH_SHMOBILE. This enables all of the PM functionality, amongst other things. Signed-off-by: Paul Mundt diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig index 505d1ac..4c68fde 100644 --- a/arch/sh/Kconfig +++ b/arch/sh/Kconfig @@ -351,6 +351,7 @@ config CPU_SUBTYPE_SH7724 bool "Support SH7724 processor" select CPU_SH4A select CPU_SHX2 + select ARCH_SHMOBILE select ARCH_SPARSEMEM_ENABLE select SYS_SUPPORTS_CMT help -- cgit v0.10.2 From bc9f3d4291f8275924a9197a81208a5df0a15095 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Thu, 16 Apr 2009 15:44:58 +0900 Subject: sh: Add a generic defconfig for SH7724 platforms. Signed-off-by: Paul Mundt diff --git a/arch/sh/configs/sh7724_generic_defconfig b/arch/sh/configs/sh7724_generic_defconfig new file mode 100644 index 0000000..268d04e --- /dev/null +++ b/arch/sh/configs/sh7724_generic_defconfig @@ -0,0 +1,707 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.30-rc2 +# Thu Apr 16 15:42:20 2009 +# +CONFIG_SUPERH=y +CONFIG_SUPERH32=y +# CONFIG_SUPERH64 is not set +CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig" +CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_BUG=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y +CONFIG_GENERIC_IRQ_PROBE=y +# CONFIG_GENERIC_GPIO is not set +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_ARCH_SUSPEND_POSSIBLE=y +CONFIG_ARCH_HIBERNATION_POSSIBLE=y +CONFIG_SYS_SUPPORTS_CMT=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_ARCH_NO_VIRT_TO_BUS=y +CONFIG_ARCH_HAS_DEFAULT_IDLE=y +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +# CONFIG_LOCALVERSION_AUTO is not set +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +# CONFIG_BSD_PROCESS_ACCT is not set + +# +# RCU Subsystem +# +# CONFIG_CLASSIC_RCU is not set +CONFIG_TREE_RCU=y +# CONFIG_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=17 +CONFIG_GROUP_SCHED=y +CONFIG_FAIR_GROUP_SCHED=y +CONFIG_RT_GROUP_SCHED=y +CONFIG_USER_SCHED=y +# CONFIG_CGROUP_SCHED is not set +CONFIG_CGROUPS=y +# CONFIG_CGROUP_DEBUG is not set +# CONFIG_CGROUP_NS is not set +# CONFIG_CGROUP_FREEZER is not set +# CONFIG_CGROUP_DEVICE is not set +# CONFIG_CPUSETS is not set +# CONFIG_CGROUP_CPUACCT is not set +# CONFIG_RESOURCE_COUNTERS is not set +# CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set +# CONFIG_BLK_DEV_INITRD is not set +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y +CONFIG_EMBEDDED=y +# CONFIG_UID16 is not set +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_STRIP_ASM_SYMS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_AIO=y +CONFIG_VM_EVENT_COUNTERS=y +# CONFIG_COMPAT_BRK is not set +# CONFIG_SLAB is not set +CONFIG_SLUB=y +# CONFIG_SLOB is not set +CONFIG_PROFILING=y +CONFIG_TRACEPOINTS=y +# CONFIG_MARKERS is not set +CONFIG_OPROFILE=y +CONFIG_HAVE_OPROFILE=y +CONFIG_HAVE_IOREMAP_PROT=y +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_CLK=y +CONFIG_HAVE_DMA_API_DEBUG=y +# CONFIG_SLOW_WORK is not set +CONFIG_HAVE_GENERIC_DMA_COHERENT=y +CONFIG_RT_MUTEXES=y +CONFIG_BASE_SMALL=0 +# CONFIG_MODULES is not set +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_FREEZER=y + +# +# System type +# +CONFIG_CPU_SH4=y +CONFIG_CPU_SH4A=y +CONFIG_CPU_SHX2=y +CONFIG_ARCH_SHMOBILE=y +# CONFIG_CPU_SUBTYPE_SH7619 is not set +# CONFIG_CPU_SUBTYPE_SH7201 is not set +# CONFIG_CPU_SUBTYPE_SH7203 is not set +# CONFIG_CPU_SUBTYPE_SH7206 is not set +# CONFIG_CPU_SUBTYPE_SH7263 is not set +# CONFIG_CPU_SUBTYPE_MXG is not set +# CONFIG_CPU_SUBTYPE_SH7705 is not set +# CONFIG_CPU_SUBTYPE_SH7706 is not set +# CONFIG_CPU_SUBTYPE_SH7707 is not set +# CONFIG_CPU_SUBTYPE_SH7708 is not set +# CONFIG_CPU_SUBTYPE_SH7709 is not set +# CONFIG_CPU_SUBTYPE_SH7710 is not set +# CONFIG_CPU_SUBTYPE_SH7712 is not set +# CONFIG_CPU_SUBTYPE_SH7720 is not set +# CONFIG_CPU_SUBTYPE_SH7721 is not set +# CONFIG_CPU_SUBTYPE_SH7750 is not set +# CONFIG_CPU_SUBTYPE_SH7091 is not set +# CONFIG_CPU_SUBTYPE_SH7750R is not set +# CONFIG_CPU_SUBTYPE_SH7750S is not set +# CONFIG_CPU_SUBTYPE_SH7751 is not set +# CONFIG_CPU_SUBTYPE_SH7751R is not set +# CONFIG_CPU_SUBTYPE_SH7760 is not set +# CONFIG_CPU_SUBTYPE_SH4_202 is not set +# CONFIG_CPU_SUBTYPE_SH7723 is not set +CONFIG_CPU_SUBTYPE_SH7724=y +# CONFIG_CPU_SUBTYPE_SH7763 is not set +# CONFIG_CPU_SUBTYPE_SH7770 is not set +# CONFIG_CPU_SUBTYPE_SH7780 is not set +# CONFIG_CPU_SUBTYPE_SH7785 is not set +# CONFIG_CPU_SUBTYPE_SH7786 is not set +# CONFIG_CPU_SUBTYPE_SHX3 is not set +# CONFIG_CPU_SUBTYPE_SH7343 is not set +# CONFIG_CPU_SUBTYPE_SH7722 is not set +# CONFIG_CPU_SUBTYPE_SH7366 is not set + +# +# Memory management options +# +CONFIG_QUICKLIST=y +CONFIG_MMU=y +CONFIG_PAGE_OFFSET=0x80000000 +CONFIG_MEMORY_START=0x08000000 +CONFIG_MEMORY_SIZE=0x04000000 +CONFIG_29BIT=y +# CONFIG_X2TLB is not set +CONFIG_VSYSCALL=y +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_SPARSEMEM_ENABLE=y +CONFIG_ARCH_SPARSEMEM_DEFAULT=y +CONFIG_MAX_ACTIVE_REGIONS=1 +CONFIG_ARCH_POPULATES_NODE_MAP=y +CONFIG_ARCH_SELECT_MEMORY_MODEL=y +CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y +CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y +CONFIG_PAGE_SIZE_4KB=y +# CONFIG_PAGE_SIZE_8KB is not set +# CONFIG_PAGE_SIZE_16KB is not set +# CONFIG_PAGE_SIZE_64KB is not set +CONFIG_ENTRY_OFFSET=0x00001000 +CONFIG_SELECT_MEMORY_MODEL=y +# CONFIG_FLATMEM_MANUAL is not set +# CONFIG_DISCONTIGMEM_MANUAL is not set +CONFIG_SPARSEMEM_MANUAL=y +CONFIG_SPARSEMEM=y +CONFIG_HAVE_MEMORY_PRESENT=y +CONFIG_SPARSEMEM_STATIC=y + +# +# Memory hotplug is currently incompatible with Software Suspend +# +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_MIGRATION=y +# CONFIG_PHYS_ADDR_T_64BIT is not set +CONFIG_ZONE_DMA_FLAG=0 +CONFIG_NR_QUICK=2 +CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y + +# +# Cache configuration +# +CONFIG_CACHE_WRITEBACK=y +# CONFIG_CACHE_WRITETHROUGH is not set +# CONFIG_CACHE_OFF is not set + +# +# Processor features +# +CONFIG_CPU_LITTLE_ENDIAN=y +# CONFIG_CPU_BIG_ENDIAN is not set +CONFIG_SH_FPU=y +# CONFIG_SH_STORE_QUEUES is not set +CONFIG_CPU_HAS_INTEVT=y +CONFIG_CPU_HAS_SR_RB=y +CONFIG_CPU_HAS_PTEA=y +CONFIG_CPU_HAS_FPU=y + +# +# Board support +# + +# +# Timer and clock configuration +# +CONFIG_SH_TMU=y +CONFIG_SH_TIMER_CMT=y +CONFIG_SH_TIMER_IRQ=16 +CONFIG_SH_PCLK_FREQ=41666666 +CONFIG_TICK_ONESHOT=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y + +# +# CPU Frequency scaling +# +CONFIG_CPU_FREQ=y +CONFIG_CPU_FREQ_TABLE=y +# CONFIG_CPU_FREQ_DEBUG is not set +CONFIG_CPU_FREQ_STAT=y +# CONFIG_CPU_FREQ_STAT_DETAILS is not set +CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y +# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set +CONFIG_CPU_FREQ_GOV_PERFORMANCE=y +# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set +# CONFIG_CPU_FREQ_GOV_USERSPACE is not set +# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set +# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set +CONFIG_SH_CPU_FREQ=y + +# +# DMA support +# +# CONFIG_SH_DMA is not set + +# +# Companion Chips +# + +# +# Additional SuperH Device Drivers +# +# CONFIG_HEARTBEAT is not set +# CONFIG_PUSH_SWITCH is not set + +# +# Kernel features +# +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_300 is not set +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 +CONFIG_SCHED_HRTICK=y +CONFIG_KEXEC=y +# CONFIG_CRASH_DUMP is not set +CONFIG_KEXEC_JUMP=y +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set +CONFIG_GUSA=y + +# +# Boot options +# +CONFIG_ZERO_PAGE_OFFSET=0x00001000 +CONFIG_BOOT_LINK_OFFSET=0x00800000 +# CONFIG_CMDLINE_BOOL is not set + +# +# Bus options +# +# CONFIG_ARCH_SUPPORTS_MSI is not set +# CONFIG_PCCARD is not set + +# +# Executable file formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_HAVE_AOUT is not set +# CONFIG_BINFMT_MISC is not set + +# +# Power management options (EXPERIMENTAL) +# +CONFIG_PM=y +# CONFIG_PM_DEBUG is not set +CONFIG_PM_SLEEP=y +CONFIG_SUSPEND=y +CONFIG_SUSPEND_FREEZER=y +CONFIG_HIBERNATION=y +CONFIG_PM_STD_PARTITION="" +CONFIG_CPU_IDLE=y +CONFIG_CPU_IDLE_GOV_LADDER=y +CONFIG_CPU_IDLE_GOV_MENU=y +# CONFIG_NET is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_STANDALONE=y +# CONFIG_PREVENT_FIRMWARE_BUILD is not set +CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_MTD is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_COW_COMMON is not set +# CONFIG_BLK_DEV_LOOP is not set +# CONFIG_BLK_DEV_RAM is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_BLK_DEV_HD is not set +# CONFIG_MISC_DEVICES is not set +CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +# CONFIG_SCSI is not set +# CONFIG_SCSI_DMA is not set +# CONFIG_SCSI_NETLINK is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set +# CONFIG_PHONE is not set + +# +# Input device support +# +# CONFIG_INPUT is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +# CONFIG_VT is not set +# CONFIG_DEVKMEM is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_SH_SCI=y +CONFIG_SERIAL_SH_SCI_NR_UARTS=6 +CONFIG_SERIAL_SH_SCI_CONSOLE=y +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_UNIX98_PTYS is not set +# CONFIG_LEGACY_PTYS is not set +# CONFIG_IPMI_HANDLER is not set +# CONFIG_HW_RANDOM is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_CHARDEV=y +CONFIG_I2C_HELPER_AUTO=y + +# +# I2C Hardware Bus support +# + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# +# CONFIG_I2C_OCORES is not set +CONFIG_I2C_SH_MOBILE=y +# CONFIG_I2C_SIMTEC is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_TAOS_EVM is not set + +# +# Other I2C/SMBus bus drivers +# +# CONFIG_I2C_PCA_PLATFORM is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_DS1682 is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_PCF8575 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set +# CONFIG_SPI is not set +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set +# CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y + +# +# Sonics Silicon Backplane +# +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_CORE is not set +# CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_TWL4030_CORE is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_PCF50633 is not set +# CONFIG_REGULATOR is not set + +# +# Multimedia devices +# + +# +# Multimedia core support +# +# CONFIG_VIDEO_DEV is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# +# CONFIG_DAB is not set + +# +# Graphics support +# +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +# CONFIG_FB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set +# CONFIG_SOUND is not set +# CONFIG_USB_SUPPORT is not set +# CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set +# CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set + +# +# RTC interfaces +# +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set + +# +# I2C RTC drivers +# +# CONFIG_RTC_DRV_DS1307 is not set +# CONFIG_RTC_DRV_DS1374 is not set +# CONFIG_RTC_DRV_DS1672 is not set +# CONFIG_RTC_DRV_MAX6900 is not set +# CONFIG_RTC_DRV_RS5C372 is not set +# CONFIG_RTC_DRV_ISL1208 is not set +# CONFIG_RTC_DRV_X1205 is not set +# CONFIG_RTC_DRV_PCF8563 is not set +# CONFIG_RTC_DRV_PCF8583 is not set +# CONFIG_RTC_DRV_M41T80 is not set +# CONFIG_RTC_DRV_S35390A is not set +# CONFIG_RTC_DRV_FM3130 is not set +# CONFIG_RTC_DRV_RX8581 is not set + +# +# SPI RTC drivers +# + +# +# Platform RTC drivers +# +# CONFIG_RTC_DRV_DS1286 is not set +# CONFIG_RTC_DRV_DS1511 is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_BQ4802 is not set +# CONFIG_RTC_DRV_V3020 is not set + +# +# on-CPU RTC drivers +# +CONFIG_RTC_DRV_SH=y +# CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set +CONFIG_UIO=y +# CONFIG_UIO_PDRV is not set +CONFIG_UIO_PDRV_GENIRQ=y +# CONFIG_UIO_SMX is not set +# CONFIG_UIO_SERCOS3 is not set +# CONFIG_STAGING is not set + +# +# File systems +# +# CONFIG_EXT2_FS is not set +# CONFIG_EXT3_FS is not set +# CONFIG_EXT4_FS is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y +# CONFIG_XFS_FS is not set +# CONFIG_BTRFS_FS is not set +# CONFIG_DNOTIFY is not set +# CONFIG_INOTIFY is not set +# CONFIG_QUOTA is not set +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# Caches +# +# CONFIG_FSCACHE is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +# CONFIG_PROC_FS is not set +# CONFIG_SYSFS is not set +# CONFIG_TMPFS is not set +# CONFIG_HUGETLBFS is not set +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_MISC_FILESYSTEMS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_NLS is not set + +# +# Kernel hacking +# +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +# CONFIG_PRINTK_TIME is not set +# CONFIG_ENABLE_WARN_DEPRECATED is not set +# CONFIG_ENABLE_MUST_CHECK is not set +CONFIG_FRAME_WARN=1024 +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set +CONFIG_DEBUG_FS=y +# CONFIG_HEADERS_CHECK is not set +# CONFIG_DEBUG_KERNEL is not set +CONFIG_STACKTRACE=y +# CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_LATENCYTOP is not set +# CONFIG_SYSCTL_SYSCALL_CHECK is not set +CONFIG_NOP_TRACER=y +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_RING_BUFFER=y +CONFIG_TRACING=y +CONFIG_TRACING_SUPPORT=y + +# +# Tracers +# +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_FTRACE_STARTUP_TEST is not set +# CONFIG_DYNAMIC_DEBUG is not set +# CONFIG_DMA_API_DEBUG is not set +# CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_SH_STANDARD_BIOS is not set +# CONFIG_EARLY_SCIF_CONSOLE is not set +# CONFIG_MORE_COMPILE_OPTIONS is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITYFS is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +# CONFIG_CRYPTO is not set +CONFIG_BINARY_PRINTF=y + +# +# Library routines +# +CONFIG_GENERIC_FIND_LAST_BIT=y +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set +# CONFIG_CRC_ITU_T is not set +# CONFIG_CRC32 is not set +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y -- cgit v0.10.2 From b8b47bfbe4eb1ae0e6891e49c86a5f4fb00413be Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Wed, 11 Mar 2009 15:41:51 +0900 Subject: sh: pass along struct pci_channel These patches rework the pci code for the sh architecture. Currently each board implements some kind of ioport to address mapping. Some boards use generic_io_base others try passing addresses as io ports. This is the first set of patches that try to unify the pci code as much as possible to avoid duplicated code. This will in the end lead to fewer lines board specific code and more generic code. This patch makes sure a struct pci_channel pointer is passed along to various pci functions such as pci_read_reg(), pci_write_reg(), pci_fixup_pcic(), sh7751_pcic_init() and sh7780_pcic_init(). Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt diff --git a/arch/sh/drivers/pci/fixups-lboxre2.c b/arch/sh/drivers/pci/fixups-lboxre2.c index 1c1d412..a82011d 100644 --- a/arch/sh/drivers/pci/fixups-lboxre2.c +++ b/arch/sh/drivers/pci/fixups-lboxre2.c @@ -9,33 +9,34 @@ * License. See the file "COPYING" in the main directory of this archive * for more details. */ +#include #include "pci-sh4.h" #define PCIMCR_MRSET_OFF 0xBFFFFFFF #define PCIMCR_RFSH_OFF 0xFFFFFFFB -int pci_fixup_pcic(void) +int pci_fixup_pcic(struct pci_channel *chan) { unsigned long bcr1, mcr; bcr1 = ctrl_inl(SH7751_BCR1); bcr1 |= 0x40080000; /* Enable Bit 19 BREQEN, set PCIC to slave */ - pci_write_reg(bcr1, SH4_PCIBCR1); + pci_write_reg(chan, bcr1, SH4_PCIBCR1); /* Enable all interrupts, so we known what to fix */ - pci_write_reg(0x0000c3ff, SH4_PCIINTM); - pci_write_reg(0x0000380f, SH4_PCIAINTM); - pci_write_reg(0xfb900047, SH7751_PCICONF1); - pci_write_reg(0xab000001, SH7751_PCICONF4); + pci_write_reg(chan, 0x0000c3ff, SH4_PCIINTM); + pci_write_reg(chan, 0x0000380f, SH4_PCIAINTM); + pci_write_reg(chan, 0xfb900047, SH7751_PCICONF1); + pci_write_reg(chan, 0xab000001, SH7751_PCICONF4); mcr = ctrl_inl(SH7751_MCR); mcr = (mcr & PCIMCR_MRSET_OFF) & PCIMCR_RFSH_OFF; - pci_write_reg(mcr, SH4_PCIMCR); + pci_write_reg(chan, mcr, SH4_PCIMCR); - pci_write_reg(0x0c000000, SH7751_PCICONF5); - pci_write_reg(0xd0000000, SH7751_PCICONF6); - pci_write_reg(0x0c000000, SH4_PCILAR0); - pci_write_reg(0x00000000, SH4_PCILAR1); + pci_write_reg(chan, 0x0c000000, SH7751_PCICONF5); + pci_write_reg(chan, 0xd0000000, SH7751_PCICONF6); + pci_write_reg(chan, 0x0c000000, SH4_PCILAR0); + pci_write_reg(chan, 0x00000000, SH4_PCILAR1); return 0; } diff --git a/arch/sh/drivers/pci/fixups-r7780rp.c b/arch/sh/drivers/pci/fixups-r7780rp.c index 3e321df..5b25021 100644 --- a/arch/sh/drivers/pci/fixups-r7780rp.c +++ b/arch/sh/drivers/pci/fixups-r7780rp.c @@ -14,32 +14,33 @@ #include "pci-sh4.h" #include -int pci_fixup_pcic(void) +int pci_fixup_pcic(struct pci_channel *chan) { - pci_write_reg(0x000043ff, SH4_PCIINTM); - pci_write_reg(0x0000380f, SH4_PCIAINTM); + pci_write_reg(chan, 0x000043ff, SH4_PCIINTM); + pci_write_reg(chan, 0x0000380f, SH4_PCIAINTM); - pci_write_reg(0xfbb00047, SH7780_PCICMD); - pci_write_reg(0x00000000, SH7780_PCIIBAR); + pci_write_reg(chan, 0xfbb00047, SH7780_PCICMD); + pci_write_reg(chan, 0x00000000, SH7780_PCIIBAR); - pci_write_reg(0x00011912, SH7780_PCISVID); - pci_write_reg(0x08000000, SH7780_PCICSCR0); - pci_write_reg(0x0000001b, SH7780_PCICSAR0); - pci_write_reg(0xfd000000, SH7780_PCICSCR1); - pci_write_reg(0x0000000f, SH7780_PCICSAR1); + pci_write_reg(chan, 0x00011912, SH7780_PCISVID); + pci_write_reg(chan, 0x08000000, SH7780_PCICSCR0); + pci_write_reg(chan, 0x0000001b, SH7780_PCICSAR0); + pci_write_reg(chan, 0xfd000000, SH7780_PCICSCR1); + pci_write_reg(chan, 0x0000000f, SH7780_PCICSAR1); - pci_write_reg(0xfd000000, SH7780_PCIMBR0); - pci_write_reg(0x00fc0000, SH7780_PCIMBMR0); + pci_write_reg(chan, 0xfd000000, SH7780_PCIMBR0); + pci_write_reg(chan, 0x00fc0000, SH7780_PCIMBMR0); #ifdef CONFIG_32BIT - pci_write_reg(0xc0000000, SH7780_PCIMBR2); - pci_write_reg(0x20000000 - SH7780_PCI_IO_SIZE, SH7780_PCIMBMR2); + pci_write_reg(chan, 0xc0000000, SH7780_PCIMBR2); + pci_write_reg(chan, 0x20000000 - SH7780_PCI_IO_SIZE, SH7780_PCIMBMR2); #endif /* Set IOBR for windows containing area specified in pci.h */ - pci_write_reg((PCIBIOS_MIN_IO & ~(SH7780_PCI_IO_SIZE - 1)), + pci_write_reg(chan, (PCIBIOS_MIN_IO & ~(SH7780_PCI_IO_SIZE - 1)), SH7780_PCIIOBR); - pci_write_reg(((SH7780_PCI_IO_SIZE-1) & (7<<18)), SH7780_PCIIOBMR); + pci_write_reg(chan, ((SH7780_PCI_IO_SIZE-1) & (7<<18)), + SH7780_PCIIOBMR); return 0; } diff --git a/arch/sh/drivers/pci/fixups-rts7751r2d.c b/arch/sh/drivers/pci/fixups-rts7751r2d.c index 904bce8..3885233 100644 --- a/arch/sh/drivers/pci/fixups-rts7751r2d.c +++ b/arch/sh/drivers/pci/fixups-rts7751r2d.c @@ -10,34 +10,35 @@ * License. See the file "COPYING" in the main directory of this archive * for more details. */ +#include #include "pci-sh4.h" #define PCIMCR_MRSET_OFF 0xBFFFFFFF #define PCIMCR_RFSH_OFF 0xFFFFFFFB -int pci_fixup_pcic(void) +int pci_fixup_pcic(struct pci_channel *chan) { unsigned long bcr1, mcr; bcr1 = ctrl_inl(SH7751_BCR1); bcr1 |= 0x40080000; /* Enable Bit 19 BREQEN, set PCIC to slave */ - pci_write_reg(bcr1, SH4_PCIBCR1); + pci_write_reg(chan, bcr1, SH4_PCIBCR1); /* Enable all interrupts, so we known what to fix */ - pci_write_reg(0x0000c3ff, SH4_PCIINTM); - pci_write_reg(0x0000380f, SH4_PCIAINTM); + pci_write_reg(chan, 0x0000c3ff, SH4_PCIINTM); + pci_write_reg(chan, 0x0000380f, SH4_PCIAINTM); - pci_write_reg(0xfb900047, SH7751_PCICONF1); - pci_write_reg(0xab000001, SH7751_PCICONF4); + pci_write_reg(chan, 0xfb900047, SH7751_PCICONF1); + pci_write_reg(chan, 0xab000001, SH7751_PCICONF4); mcr = ctrl_inl(SH7751_MCR); mcr = (mcr & PCIMCR_MRSET_OFF) & PCIMCR_RFSH_OFF; - pci_write_reg(mcr, SH4_PCIMCR); + pci_write_reg(chan, mcr, SH4_PCIMCR); - pci_write_reg(0x0c000000, SH7751_PCICONF5); - pci_write_reg(0xd0000000, SH7751_PCICONF6); - pci_write_reg(0x0c000000, SH4_PCILAR0); - pci_write_reg(0x00000000, SH4_PCILAR1); + pci_write_reg(chan, 0x0c000000, SH7751_PCICONF5); + pci_write_reg(chan, 0xd0000000, SH7751_PCICONF6); + pci_write_reg(chan, 0x0c000000, SH4_PCILAR0); + pci_write_reg(chan, 0x00000000, SH4_PCILAR1); return 0; } diff --git a/arch/sh/drivers/pci/fixups-sdk7780.c b/arch/sh/drivers/pci/fixups-sdk7780.c index 2f88630..3f6754a 100644 --- a/arch/sh/drivers/pci/fixups-sdk7780.c +++ b/arch/sh/drivers/pci/fixups-sdk7780.c @@ -14,46 +14,48 @@ #include "pci-sh4.h" #include -int pci_fixup_pcic(void) +int pci_fixup_pcic(struct pci_channel *chan) { ctrl_outl(0x00000001, SH7780_PCI_VCR2); /* Enable all interrupts, so we know what to fix */ - pci_write_reg(0x0000C3FF, SH7780_PCIIMR); - pci_write_reg(0x0000380F, SH7780_PCIAINTM); + pci_write_reg(chan, 0x0000C3FF, SH7780_PCIIMR); + pci_write_reg(chan, 0x0000380F, SH7780_PCIAINTM); /* Set up standard PCI config registers */ - pci_write_reg(0xFB00, SH7780_PCISTATUS); - pci_write_reg(0x0047, SH7780_PCICMD); - pci_write_reg(0x00, SH7780_PCIPIF); - pci_write_reg(0x00, SH7780_PCISUB); - pci_write_reg(0x06, SH7780_PCIBCC); - pci_write_reg(0x1912, SH7780_PCISVID); - pci_write_reg(0x0001, SH7780_PCISID); + pci_write_reg(chan, 0xFB00, SH7780_PCISTATUS); + pci_write_reg(chan, 0x0047, SH7780_PCICMD); + pci_write_reg(chan, 0x00, SH7780_PCIPIF); + pci_write_reg(chan, 0x00, SH7780_PCISUB); + pci_write_reg(chan, 0x06, SH7780_PCIBCC); + pci_write_reg(chan, 0x1912, SH7780_PCISVID); + pci_write_reg(chan, 0x0001, SH7780_PCISID); - pci_write_reg(0x08000000, SH7780_PCIMBAR0); /* PCI */ - pci_write_reg(0x08000000, SH7780_PCILAR0); /* SHwy */ - pci_write_reg(0x07F00001, SH7780_PCILSR); /* size 128M w/ MBAR */ + pci_write_reg(chan, 0x08000000, SH7780_PCIMBAR0); /* PCI */ + pci_write_reg(chan, 0x08000000, SH7780_PCILAR0); /* SHwy */ + pci_write_reg(chan, 0x07F00001, SH7780_PCILSR); /* size 128M w/ MBAR */ - pci_write_reg(0x00000000, SH7780_PCIMBAR1); - pci_write_reg(0x00000000, SH7780_PCILAR1); - pci_write_reg(0x00000000, SH7780_PCILSR1); + pci_write_reg(chan, 0x00000000, SH7780_PCIMBAR1); + pci_write_reg(chan, 0x00000000, SH7780_PCILAR1); + pci_write_reg(chan, 0x00000000, SH7780_PCILSR1); - pci_write_reg(0xAB000801, SH7780_PCIIBAR); + pci_write_reg(chan, 0xAB000801, SH7780_PCIIBAR); /* * Set the MBR so PCI address is one-to-one with window, * meaning all calls go straight through... use ifdef to * catch erroneous assumption. */ - pci_write_reg(0xFD000000 , SH7780_PCIMBR0); - pci_write_reg(0x00FC0000 , SH7780_PCIMBMR0); /* 16M */ + pci_write_reg(chan, 0xFD000000 , SH7780_PCIMBR0); + pci_write_reg(chan, 0x00FC0000 , SH7780_PCIMBMR0); /* 16M */ /* Set IOBR for window containing area specified in pci.h */ - pci_write_reg(PCIBIOS_MIN_IO & ~(SH7780_PCI_IO_SIZE-1), SH7780_PCIIOBR); - pci_write_reg((SH7780_PCI_IO_SIZE-1) & (7 << 18), SH7780_PCIIOBMR); + pci_write_reg(chan, PCIBIOS_MIN_IO & ~(SH7780_PCI_IO_SIZE-1), + SH7780_PCIIOBR); + pci_write_reg(chan, (SH7780_PCI_IO_SIZE-1) & (7 << 18), + SH7780_PCIIOBMR); - pci_write_reg(0xA5000C01, SH7780_PCICR); + pci_write_reg(chan, 0xA5000C01, SH7780_PCICR); return 0; } diff --git a/arch/sh/drivers/pci/fixups-se7780.c b/arch/sh/drivers/pci/fixups-se7780.c index 880cea1..b8e735e 100644 --- a/arch/sh/drivers/pci/fixups-se7780.c +++ b/arch/sh/drivers/pci/fixups-se7780.c @@ -15,13 +15,13 @@ #include "pci-sh4.h" #include -int pci_fixup_pcic(void) +int pci_fixup_pcic(struct pci_channel *chan) { ctrl_outl(0x00000001, SH7780_PCI_VCR2); /* Enable all interrupts, so we know what to fix */ - pci_write_reg(0x0000C3FF, SH7780_PCIIMR); - pci_write_reg(0x0000380F, SH7780_PCIAINTM); + pci_write_reg(chan, 0x0000C3FF, SH7780_PCIIMR); + pci_write_reg(chan, 0x0000380F, SH7780_PCIAINTM); /* Set up standard PCI config registers */ ctrl_outw(0xFB00, PCI_REG(SH7780_PCISTATUS)); @@ -32,29 +32,31 @@ int pci_fixup_pcic(void) ctrl_outw(0x1912, PCI_REG(SH7780_PCISVID)); ctrl_outw(0x0001, PCI_REG(SH7780_PCISID)); - pci_write_reg(0x08000000, SH7780_PCIMBAR0); /* PCI */ - pci_write_reg(0x08000000, SH7780_PCILAR0); /* SHwy */ - pci_write_reg(0x07F00001, SH7780_PCILSR); /* size 128M w/ MBAR */ + pci_write_reg(chan, 0x08000000, SH7780_PCIMBAR0); /* PCI */ + pci_write_reg(chan, 0x08000000, SH7780_PCILAR0); /* SHwy */ + pci_write_reg(chan, 0x07F00001, SH7780_PCILSR); /* size 128M w/ MBAR */ - pci_write_reg(0x00000000, SH7780_PCIMBAR1); - pci_write_reg(0x00000000, SH7780_PCILAR1); - pci_write_reg(0x00000000, SH7780_PCILSR1); + pci_write_reg(chan, 0x00000000, SH7780_PCIMBAR1); + pci_write_reg(chan, 0x00000000, SH7780_PCILAR1); + pci_write_reg(chan, 0x00000000, SH7780_PCILSR1); - pci_write_reg(0xAB000801, SH7780_PCIIBAR); + pci_write_reg(chan, 0xAB000801, SH7780_PCIIBAR); /* * Set the MBR so PCI address is one-to-one with window, * meaning all calls go straight through... use ifdef to * catch erroneous assumption. */ - pci_write_reg(0xFD000000 , SH7780_PCIMBR0); - pci_write_reg(0x00FC0000 , SH7780_PCIMBMR0); /* 16M */ + pci_write_reg(chan, 0xFD000000 , SH7780_PCIMBR0); + pci_write_reg(chan, 0x00FC0000 , SH7780_PCIMBMR0); /* 16M */ /* Set IOBR for window containing area specified in pci.h */ - pci_write_reg(PCIBIOS_MIN_IO & ~(SH7780_PCI_IO_SIZE-1), SH7780_PCIIOBR); - pci_write_reg((SH7780_PCI_IO_SIZE-1) & (7 << 18), SH7780_PCIIOBMR); + pci_write_reg(chan, PCIBIOS_MIN_IO & ~(SH7780_PCI_IO_SIZE-1), + SH7780_PCIIOBR); + pci_write_reg(chan, (SH7780_PCI_IO_SIZE-1) & (7 << 18), + SH7780_PCIIOBMR); - pci_write_reg(0xA5000C01, SH7780_PCICR); + pci_write_reg(chan, 0xA5000C01, SH7780_PCICR); return 0; } diff --git a/arch/sh/drivers/pci/ops-landisk.c b/arch/sh/drivers/pci/ops-landisk.c index bff09ec..343c072 100644 --- a/arch/sh/drivers/pci/ops-landisk.c +++ b/arch/sh/drivers/pci/ops-landisk.c @@ -45,7 +45,7 @@ static struct sh4_pci_address_map sh7751_pci_map = { int __init pcibios_init_platform(void) { - return sh7751_pcic_init(&sh7751_pci_map); + return sh7751_pcic_init(&board_pci_channels[0], &sh7751_pci_map); } int pcibios_map_platform_irq(struct pci_dev *pdev, u8 slot, u8 pin) diff --git a/arch/sh/drivers/pci/ops-lboxre2.c b/arch/sh/drivers/pci/ops-lboxre2.c index 86c0b6f..8bff32a 100644 --- a/arch/sh/drivers/pci/ops-lboxre2.c +++ b/arch/sh/drivers/pci/ops-lboxre2.c @@ -59,5 +59,5 @@ static struct sh4_pci_address_map sh7751_pci_map = { int __init pcibios_init_platform(void) { - return sh7751_pcic_init(&sh7751_pci_map); + return sh7751_pcic_init(&board_pci_channels[0], &sh7751_pci_map); } diff --git a/arch/sh/drivers/pci/ops-r7780rp.c b/arch/sh/drivers/pci/ops-r7780rp.c index 8555238..bf32ee8 100644 --- a/arch/sh/drivers/pci/ops-r7780rp.c +++ b/arch/sh/drivers/pci/ops-r7780rp.c @@ -64,5 +64,5 @@ static struct sh4_pci_address_map sh7780_pci_map = { int __init pcibios_init_platform(void) { - return sh7780_pcic_init(&sh7780_pci_map); + return sh7780_pcic_init(&board_pci_channels[0], &sh7780_pci_map); } diff --git a/arch/sh/drivers/pci/ops-rts7751r2d.c b/arch/sh/drivers/pci/ops-rts7751r2d.c index d6ca74b..e4208a6 100644 --- a/arch/sh/drivers/pci/ops-rts7751r2d.c +++ b/arch/sh/drivers/pci/ops-rts7751r2d.c @@ -69,6 +69,6 @@ static struct sh4_pci_address_map sh7751_pci_map = { int __init pcibios_init_platform(void) { __set_io_port_base(SH7751_PCI_IO_BASE); - return sh7751_pcic_init(&sh7751_pci_map); + return sh7751_pcic_init(&board_pci_channels[0], &sh7751_pci_map); } diff --git a/arch/sh/drivers/pci/ops-sdk7780.c b/arch/sh/drivers/pci/ops-sdk7780.c index 4dcc641..21d59d4 100644 --- a/arch/sh/drivers/pci/ops-sdk7780.c +++ b/arch/sh/drivers/pci/ops-sdk7780.c @@ -69,5 +69,5 @@ static struct sh4_pci_address_map sdk7780_pci_map = { int __init pcibios_init_platform(void) { printk(KERN_INFO "SH7780 PCI: Finished initializing PCI controller\n"); - return sh7780_pcic_init(&sdk7780_pci_map); + return sh7780_pcic_init(&board_pci_channels[0], &sdk7780_pci_map); } diff --git a/arch/sh/drivers/pci/ops-se7780.c b/arch/sh/drivers/pci/ops-se7780.c index 3145c62..78a6f2b 100644 --- a/arch/sh/drivers/pci/ops-se7780.c +++ b/arch/sh/drivers/pci/ops-se7780.c @@ -92,5 +92,5 @@ int __init pcibios_init_platform(void) ctrl_outw(0x0013, FPGA_PCI_INTSEL1); ctrl_outw(0xE402, FPGA_PCI_INTSEL2); - return sh7780_pcic_init(&se7780_pci_map); + return sh7780_pcic_init(&board_pci_channels[0], &se7780_pci_map); } diff --git a/arch/sh/drivers/pci/ops-sh4.c b/arch/sh/drivers/pci/ops-sh4.c index 710a3b0..92d27f7 100644 --- a/arch/sh/drivers/pci/ops-sh4.c +++ b/arch/sh/drivers/pci/ops-sh4.c @@ -34,8 +34,8 @@ static int sh4_pci_read(struct pci_bus *bus, unsigned int devfn, * so we must do byte alignment by hand */ spin_lock_irqsave(&sh4_pci_lock, flags); - pci_write_reg(CONFIG_CMD(bus, devfn, where), SH4_PCIPAR); - data = pci_read_reg(SH4_PCIPDR); + pci_write_reg(NULL, CONFIG_CMD(bus, devfn, where), SH4_PCIPAR); + data = pci_read_reg(NULL, SH4_PCIPDR); spin_unlock_irqrestore(&sh4_pci_lock, flags); switch (size) { @@ -68,8 +68,8 @@ static int sh4_pci_write(struct pci_bus *bus, unsigned int devfn, u32 data; spin_lock_irqsave(&sh4_pci_lock, flags); - pci_write_reg(CONFIG_CMD(bus, devfn, where), SH4_PCIPAR); - data = pci_read_reg(SH4_PCIPDR); + pci_write_reg(NULL, CONFIG_CMD(bus, devfn, where), SH4_PCIPAR); + data = pci_read_reg(NULL, SH4_PCIPDR); spin_unlock_irqrestore(&sh4_pci_lock, flags); switch (size) { @@ -90,7 +90,7 @@ static int sh4_pci_write(struct pci_bus *bus, unsigned int devfn, return PCIBIOS_FUNC_NOT_SUPPORTED; } - pci_write_reg(data, SH4_PCIPDR); + pci_write_reg(NULL, data, SH4_PCIPDR); return PCIBIOS_SUCCESSFUL; } @@ -106,25 +106,25 @@ struct pci_ops sh4_pci_ops = { */ static unsigned int pci_probe = PCI_PROBE_CONF1; -int __init sh4_pci_check_direct(void) +int __init sh4_pci_check_direct(struct pci_channel *chan) { /* * Check if configuration works. */ if (pci_probe & PCI_PROBE_CONF1) { - unsigned int tmp = pci_read_reg(SH4_PCIPAR); + unsigned int tmp = pci_read_reg(chan, SH4_PCIPAR); - pci_write_reg(P1SEG, SH4_PCIPAR); + pci_write_reg(chan, P1SEG, SH4_PCIPAR); - if (pci_read_reg(SH4_PCIPAR) == P1SEG) { - pci_write_reg(tmp, SH4_PCIPAR); + if (pci_read_reg(chan, SH4_PCIPAR) == P1SEG) { + pci_write_reg(chan, tmp, SH4_PCIPAR); printk(KERN_INFO "PCI: Using configuration type 1\n"); request_region(PCI_REG(SH4_PCIPAR), 8, "PCI conf1"); return 0; } - pci_write_reg(tmp, SH4_PCIPAR); + pci_write_reg(chan, tmp, SH4_PCIPAR); } pr_debug("PCI: pci_check_direct failed\n"); @@ -163,7 +163,7 @@ char * __devinit pcibios_setup(char *str) return str; } -int __attribute__((weak)) pci_fixup_pcic(void) +int __attribute__((weak)) pci_fixup_pcic(struct pci_channel *chan) { /* Nothing to do. */ return 0; diff --git a/arch/sh/drivers/pci/ops-snapgear.c b/arch/sh/drivers/pci/ops-snapgear.c index 53dd893..cba8015 100644 --- a/arch/sh/drivers/pci/ops-snapgear.c +++ b/arch/sh/drivers/pci/ops-snapgear.c @@ -66,7 +66,7 @@ static struct sh4_pci_address_map sh7751_pci_map = { */ int __init pcibios_init_platform(void) { - return sh7751_pcic_init(&sh7751_pci_map); + return sh7751_pcic_init(&board_pci_channels[0], &sh7751_pci_map); } int __init pcibios_map_platform_irq(struct pci_dev *pdev, u8 slot, u8 pin) diff --git a/arch/sh/drivers/pci/ops-titan.c b/arch/sh/drivers/pci/ops-titan.c index a8f7801..69fcc5c 100644 --- a/arch/sh/drivers/pci/ops-titan.c +++ b/arch/sh/drivers/pci/ops-titan.c @@ -73,5 +73,5 @@ static struct sh4_pci_address_map sh7751_pci_map = { int __init pcibios_init_platform(void) { - return sh7751_pcic_init(&sh7751_pci_map); + return sh7751_pcic_init(&board_pci_channels[0], &sh7751_pci_map); } diff --git a/arch/sh/drivers/pci/pci-sh4.h b/arch/sh/drivers/pci/pci-sh4.h index a83dcf7..62ba350 100644 --- a/arch/sh/drivers/pci/pci-sh4.h +++ b/arch/sh/drivers/pci/pci-sh4.h @@ -154,8 +154,8 @@ /* arch/sh/kernel/drivers/pci/ops-sh4.c */ extern struct pci_ops sh4_pci_ops; -int sh4_pci_check_direct(void); -int pci_fixup_pcic(void); +int sh4_pci_check_direct(struct pci_channel *chan); +int pci_fixup_pcic(struct pci_channel *chan); struct sh4_pci_address_space { unsigned long base; @@ -168,13 +168,16 @@ struct sh4_pci_address_map { unsigned long flags; }; -static inline void pci_write_reg(unsigned long val, unsigned long reg) +static inline void pci_write_reg(struct pci_channel *chan, + unsigned long val, unsigned long reg) { ctrl_outl(val, PCI_REG(reg)); } -static inline unsigned long pci_read_reg(unsigned long reg) +static inline unsigned long pci_read_reg(struct pci_channel *chan, + unsigned long reg) { return ctrl_inl(PCI_REG(reg)); } + #endif /* __PCI_SH4_H */ diff --git a/arch/sh/drivers/pci/pci-sh7751.c b/arch/sh/drivers/pci/pci-sh7751.c index 3065eb184..9c2c014 100644 --- a/arch/sh/drivers/pci/pci-sh7751.c +++ b/arch/sh/drivers/pci/pci-sh7751.c @@ -40,21 +40,22 @@ static int __init sh7751_pci_init(void) pr_debug("PCI: Starting intialization.\n"); /* check for SH7751/SH7751R hardware */ - id = pci_read_reg(SH7751_PCICONF0); + id = pci_read_reg(NULL, SH7751_PCICONF0); if (id != ((SH7751_DEVICE_ID << 16) | SH7751_VENDOR_ID) && id != ((SH7751R_DEVICE_ID << 16) | SH7751_VENDOR_ID)) { pr_debug("PCI: This is not an SH7751(R) (%x)\n", id); return -ENODEV; } - if ((ret = sh4_pci_check_direct()) != 0) + if ((ret = sh4_pci_check_direct(NULL)) != 0) return ret; return pcibios_init_platform(); } subsys_initcall(sh7751_pci_init); -static int __init __area_sdram_check(unsigned int area) +static int __init __area_sdram_check(struct pci_channel *chan, + unsigned int area) { u32 word; @@ -65,7 +66,7 @@ static int __init __area_sdram_check(unsigned int area) area, word); return 0; } - pci_write_reg(word, SH4_PCIBCR1); + pci_write_reg(chan, word, SH4_PCIBCR1); word = (u16)ctrl_inw(SH7751_BCR2); /* check BCR2 for 32bit SDRAM interface*/ @@ -74,12 +75,13 @@ static int __init __area_sdram_check(unsigned int area) area, word); return 0; } - pci_write_reg(word, SH4_PCIBCR2); + pci_write_reg(chan, word, SH4_PCIBCR2); return 1; } -int __init sh7751_pcic_init(struct sh4_pci_address_map *map) +int __init sh7751_pcic_init(struct pci_channel *chan, + struct sh4_pci_address_map *map) { u32 reg; u32 word; @@ -90,10 +92,10 @@ int __init sh7751_pcic_init(struct sh4_pci_address_map *map) ctrl_outl(reg, SH7751_BCR1); /* Turn the clocks back on (not done in reset)*/ - pci_write_reg(0, SH4_PCICLKR); + pci_write_reg(chan, 0, SH4_PCICLKR); /* Clear Powerdown IRQ's (not done in reset) */ word = SH4_PCIPINT_D3 | SH4_PCIPINT_D0; - pci_write_reg(word, SH4_PCIPINT); + pci_write_reg(chan, word, SH4_PCIPINT); /* * This code is unused for some boards as it is done in the @@ -103,11 +105,11 @@ int __init sh7751_pcic_init(struct sh4_pci_address_map *map) if (!(map->flags & SH4_PCIC_NO_RESET)) { /* toggle PCI reset pin */ word = SH4_PCICR_PREFIX | SH4_PCICR_PRST; - pci_write_reg(word, SH4_PCICR); + pci_write_reg(chan, word, SH4_PCICR); /* Wait for a long time... not 1 sec. but long enough */ mdelay(100); word = SH4_PCICR_PREFIX; - pci_write_reg(word, SH4_PCICR); + pci_write_reg(chan, word, SH4_PCICR); } /* set the command/status bits to: @@ -116,11 +118,11 @@ int __init sh7751_pcic_init(struct sh4_pci_address_map *map) */ word = SH7751_PCICONF1_WCC | SH7751_PCICONF1_PER | SH7751_PCICONF1_BUM | SH7751_PCICONF1_MES; - pci_write_reg(word, SH7751_PCICONF1); + pci_write_reg(chan, word, SH7751_PCICONF1); /* define this host as the host bridge */ word = PCI_BASE_CLASS_BRIDGE << 24; - pci_write_reg(word, SH7751_PCICONF2); + pci_write_reg(chan, word, SH7751_PCICONF2); /* Set IO and Mem windows to local address * Make PCI and local address the same for easy 1 to 1 mapping @@ -128,24 +130,24 @@ int __init sh7751_pcic_init(struct sh4_pci_address_map *map) * Window1 = map->window1.size @ cached area base = SDRAM */ word = map->window0.size - 1; - pci_write_reg(word, SH4_PCILSR0); + pci_write_reg(chan, word, SH4_PCILSR0); word = map->window1.size - 1; - pci_write_reg(word, SH4_PCILSR1); + pci_write_reg(chan, word, SH4_PCILSR1); /* Set the values on window 0 PCI config registers */ word = P2SEGADDR(map->window0.base); - pci_write_reg(word, SH4_PCILAR0); - pci_write_reg(word, SH7751_PCICONF5); + pci_write_reg(chan, word, SH4_PCILAR0); + pci_write_reg(chan, word, SH7751_PCICONF5); /* Set the values on window 1 PCI config registers */ word = PHYSADDR(map->window1.base); - pci_write_reg(word, SH4_PCILAR1); - pci_write_reg(word, SH7751_PCICONF6); + pci_write_reg(chan, word, SH4_PCILAR1); + pci_write_reg(chan, word, SH7751_PCICONF6); /* Set the local 16MB PCI memory space window to * the lowest PCI mapped address */ word = PCIBIOS_MIN_MEM & SH4_PCIMBR_MASK; pr_debug("PCI: Setting upper bits of Memory window to 0x%x\n", word); - pci_write_reg(word , SH4_PCIMBR); + pci_write_reg(chan, word , SH4_PCIMBR); /* Map IO space into PCI IO window * The IO window is 64K-PCIBIOS_MIN_IO in size @@ -160,19 +162,19 @@ int __init sh7751_pcic_init(struct sh4_pci_address_map *map) * correctly */ word = PCIBIOS_MIN_IO & SH4_PCIIOBR_MASK; pr_debug("PCI: Setting upper bits of IO window to 0x%x\n", word); - pci_write_reg(word, SH4_PCIIOBR); + pci_write_reg(chan, word, SH4_PCIIOBR); /* Set PCI WCRx, BCRx's, copy from BSC locations */ /* check BCR for SDRAM in specified area */ switch (map->window0.base) { - case SH7751_CS0_BASE_ADDR: word = __area_sdram_check(0); break; - case SH7751_CS1_BASE_ADDR: word = __area_sdram_check(1); break; - case SH7751_CS2_BASE_ADDR: word = __area_sdram_check(2); break; - case SH7751_CS3_BASE_ADDR: word = __area_sdram_check(3); break; - case SH7751_CS4_BASE_ADDR: word = __area_sdram_check(4); break; - case SH7751_CS5_BASE_ADDR: word = __area_sdram_check(5); break; - case SH7751_CS6_BASE_ADDR: word = __area_sdram_check(6); break; + case SH7751_CS0_BASE_ADDR: word = __area_sdram_check(chan, 0); break; + case SH7751_CS1_BASE_ADDR: word = __area_sdram_check(chan, 1); break; + case SH7751_CS2_BASE_ADDR: word = __area_sdram_check(chan, 2); break; + case SH7751_CS3_BASE_ADDR: word = __area_sdram_check(chan, 3); break; + case SH7751_CS4_BASE_ADDR: word = __area_sdram_check(chan, 4); break; + case SH7751_CS5_BASE_ADDR: word = __area_sdram_check(chan, 5); break; + case SH7751_CS6_BASE_ADDR: word = __area_sdram_check(chan, 6); break; } if (!word) @@ -180,25 +182,25 @@ int __init sh7751_pcic_init(struct sh4_pci_address_map *map) /* configure the wait control registers */ word = ctrl_inl(SH7751_WCR1); - pci_write_reg(word, SH4_PCIWCR1); + pci_write_reg(chan, word, SH4_PCIWCR1); word = ctrl_inl(SH7751_WCR2); - pci_write_reg(word, SH4_PCIWCR2); + pci_write_reg(chan, word, SH4_PCIWCR2); word = ctrl_inl(SH7751_WCR3); - pci_write_reg(word, SH4_PCIWCR3); + pci_write_reg(chan, word, SH4_PCIWCR3); word = ctrl_inl(SH7751_MCR); - pci_write_reg(word, SH4_PCIMCR); + pci_write_reg(chan, word, SH4_PCIMCR); /* NOTE: I'm ignoring the PCI error IRQs for now.. * TODO: add support for the internal error interrupts and * DMA interrupts... */ - pci_fixup_pcic(); + pci_fixup_pcic(chan); /* SH7751 init done, set central function init complete */ /* use round robin mode to stop a device starving/overruning */ word = SH4_PCICR_PREFIX | SH4_PCICR_CFIN | SH4_PCICR_ARBM; - pci_write_reg(word, SH4_PCICR); + pci_write_reg(chan, word, SH4_PCICR); return 1; } diff --git a/arch/sh/drivers/pci/pci-sh7751.h b/arch/sh/drivers/pci/pci-sh7751.h index 68e3cb5..6f101e5 100644 --- a/arch/sh/drivers/pci/pci-sh7751.h +++ b/arch/sh/drivers/pci/pci-sh7751.h @@ -130,6 +130,7 @@ struct sh4_pci_address_map; /* arch/sh/drivers/pci/pci-sh7751.c */ -int sh7751_pcic_init(struct sh4_pci_address_map *map); +int sh7751_pcic_init(struct pci_channel *chan, + struct sh4_pci_address_map *map); #endif /* _PCI_SH7751_H_ */ diff --git a/arch/sh/drivers/pci/pci-sh7780.c b/arch/sh/drivers/pci/pci-sh7780.c index bae6a2c..56f673f 100644 --- a/arch/sh/drivers/pci/pci-sh7780.c +++ b/arch/sh/drivers/pci/pci-sh7780.c @@ -55,7 +55,7 @@ static int __init sh7780_pci_init(void) ctrl_outl(0x00000001, SH7780_PCI_VCR2); /* Enable PCIC */ /* check for SH7780/SH7780R hardware */ - id = pci_read_reg(SH7780_PCIVID); + id = pci_read_reg(NULL, SH7780_PCIVID); if ((id & 0xffff) == SH7780_VENDOR_ID) { switch ((id >> 16) & 0xffff) { case SH7763_DEVICE_ID: @@ -82,14 +82,15 @@ static int __init sh7780_pci_init(void) ctrl_outl(0x33333333, INTC_INTPRI); } - if ((ret = sh4_pci_check_direct()) != 0) + if ((ret = sh4_pci_check_direct(NULL)) != 0) return ret; return pcibios_init_platform(); } core_initcall(sh7780_pci_init); -int __init sh7780_pcic_init(struct sh4_pci_address_map *map) +int __init sh7780_pcic_init(struct pci_channel *chan, + struct sh4_pci_address_map *map) { u32 word; @@ -101,34 +102,34 @@ int __init sh7780_pcic_init(struct sh4_pci_address_map *map) if (!(map->flags & SH4_PCIC_NO_RESET)) { /* toggle PCI reset pin */ word = SH4_PCICR_PREFIX | SH4_PCICR_PRST; - pci_write_reg(word, SH4_PCICR); + pci_write_reg(chan, word, SH4_PCICR); /* Wait for a long time... not 1 sec. but long enough */ mdelay(100); word = SH4_PCICR_PREFIX; - pci_write_reg(word, SH4_PCICR); + pci_write_reg(chan, word, SH4_PCICR); } /* set the command/status bits to: * Wait Cycle Control + Parity Enable + Bus Master + * Mem space enable */ - pci_write_reg(0x00000046, SH7780_PCICMD); + pci_write_reg(chan, 0x00000046, SH7780_PCICMD); /* define this host as the host bridge */ word = PCI_BASE_CLASS_BRIDGE << 24; - pci_write_reg(word, SH7780_PCIRID); + pci_write_reg(chan, word, SH7780_PCIRID); /* Set IO and Mem windows to local address * Make PCI and local address the same for easy 1 to 1 mapping */ - pci_write_reg(map->window0.size - 0xfffff, SH4_PCILSR0); - pci_write_reg(map->window1.size - 0xfffff, SH4_PCILSR1); + pci_write_reg(chan, map->window0.size - 0xfffff, SH4_PCILSR0); + pci_write_reg(chan, map->window1.size - 0xfffff, SH4_PCILSR1); /* Set the values on window 0 PCI config registers */ - pci_write_reg(map->window0.base, SH4_PCILAR0); - pci_write_reg(map->window0.base, SH7780_PCIMBAR0); + pci_write_reg(chan, map->window0.base, SH4_PCILAR0); + pci_write_reg(chan, map->window0.base, SH7780_PCIMBAR0); /* Set the values on window 1 PCI config registers */ - pci_write_reg(map->window1.base, SH4_PCILAR1); - pci_write_reg(map->window1.base, SH7780_PCIMBAR1); + pci_write_reg(chan, map->window1.base, SH4_PCILAR1); + pci_write_reg(chan, map->window1.base, SH7780_PCIMBAR1); /* Map IO space into PCI IO window * The IO window is 64K-PCIBIOS_MIN_IO in size @@ -145,12 +146,12 @@ int __init sh7780_pcic_init(struct sh4_pci_address_map *map) */ /* Apply any last-minute PCIC fixups */ - pci_fixup_pcic(); + pci_fixup_pcic(chan); /* SH7780 init done, set central function init complete */ /* use round robin mode to stop a device starving/overruning */ word = SH4_PCICR_PREFIX | SH4_PCICR_CFIN | SH4_PCICR_FTO; - pci_write_reg(word, SH4_PCICR); + pci_write_reg(chan, word, SH4_PCICR); return 1; } diff --git a/arch/sh/drivers/pci/pci-sh7780.h b/arch/sh/drivers/pci/pci-sh7780.h index 93adc71..d349611 100644 --- a/arch/sh/drivers/pci/pci-sh7780.h +++ b/arch/sh/drivers/pci/pci-sh7780.h @@ -109,6 +109,7 @@ struct sh4_pci_address_map; /* arch/sh/drivers/pci/pci-sh7780.c */ -int sh7780_pcic_init(struct sh4_pci_address_map *map); +int sh7780_pcic_init(struct pci_channel *chan, + struct sh4_pci_address_map *map); #endif /* _PCI_SH7780_H_ */ -- cgit v0.10.2 From d0e3db40e2a1352aa2a2f425a7d4631bddc03d51 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Wed, 11 Mar 2009 15:46:14 +0900 Subject: sh: add init member to pci_channel data This patch adds an init callback to struct pci_channel and makes sure it is initialized properly. Code is added to call this init function from pcibios_init(). Return values are adjusted and a warning is is printed if init fails. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt diff --git a/arch/sh/boards/mach-dreamcast/setup.c b/arch/sh/boards/mach-dreamcast/setup.c index d1bee48..ebe9922 100644 --- a/arch/sh/boards/mach-dreamcast/setup.c +++ b/arch/sh/boards/mach-dreamcast/setup.c @@ -30,7 +30,6 @@ extern struct irq_chip systemasic_int; extern void aica_time_init(void); -extern int gapspci_init(void); extern int systemasic_irq_demux(int); static void __init dreamcast_setup(char **cmdline_p) @@ -51,11 +50,6 @@ static void __init dreamcast_setup(char **cmdline_p) handle_level_irq); board_time_init = aica_time_init; - -#ifdef CONFIG_PCI - if (gapspci_init() < 0) - printk(KERN_WARNING "GAPSPCI was not detected.\n"); -#endif } static struct sh_machine_vector mv_dreamcast __initmv = { diff --git a/arch/sh/drivers/pci/ops-cayman.c b/arch/sh/drivers/pci/ops-cayman.c index 38ef762..f4a5e14 100644 --- a/arch/sh/drivers/pci/ops-cayman.c +++ b/arch/sh/drivers/pci/ops-cayman.c @@ -77,7 +77,7 @@ int __init pcibios_map_platform_irq(struct pci_dev *dev, u8 slot, u8 pin) } struct pci_channel board_pci_channels[] = { - { &sh5_pci_ops, NULL, NULL, 0, 0xff }, + { sh5_pci_init, &sh5_pci_ops, NULL, NULL, 0, 0xff }, { NULL, NULL, NULL, 0, 0 }, }; EXPORT_SYMBOL(board_pci_channels); diff --git a/arch/sh/drivers/pci/ops-dreamcast.c b/arch/sh/drivers/pci/ops-dreamcast.c index f5d2a2a..f62063e 100644 --- a/arch/sh/drivers/pci/ops-dreamcast.c +++ b/arch/sh/drivers/pci/ops-dreamcast.c @@ -42,15 +42,6 @@ static struct resource gapspci_mem_resource = { .flags = IORESOURCE_MEM, }; -static struct pci_ops gapspci_pci_ops; - -struct pci_channel board_pci_channels[] = { - { &gapspci_pci_ops, &gapspci_io_resource, - &gapspci_mem_resource, 0, 1 }, - { 0, } -}; -EXPORT_SYMBOL(board_pci_channels); - /* * The !gapspci_config_access case really shouldn't happen, ever, unless * someone implicitly messes around with the last devfn value.. otherwise we @@ -116,7 +107,7 @@ static struct pci_ops gapspci_pci_ops = { * gapspci init */ -int __init gapspci_init(void) +static int __init gapspci_init(struct pci_channel *chan) { char idbuf[16]; int i; @@ -168,3 +159,10 @@ char * __devinit pcibios_setup(char *str) { return str; } + +struct pci_channel board_pci_channels[] = { + { gapspci_init, &gapspci_pci_ops, &gapspci_io_resource, + &gapspci_mem_resource, 0, 1 }, + { 0, } +}; +EXPORT_SYMBOL(board_pci_channels); diff --git a/arch/sh/drivers/pci/ops-landisk.c b/arch/sh/drivers/pci/ops-landisk.c index 343c072..c46911d9 100644 --- a/arch/sh/drivers/pci/ops-landisk.c +++ b/arch/sh/drivers/pci/ops-landisk.c @@ -30,7 +30,7 @@ static struct resource sh7751_mem_resource = { }; struct pci_channel board_pci_channels[] = { - {&sh4_pci_ops, &sh7751_io_resource, &sh7751_mem_resource, 0, 0x3ff}, + { sh7751_pci_init, &sh4_pci_ops, &sh7751_io_resource, &sh7751_mem_resource, 0, 0x3ff}, {NULL, NULL, NULL, 0, 0}, }; diff --git a/arch/sh/drivers/pci/ops-lboxre2.c b/arch/sh/drivers/pci/ops-lboxre2.c index 8bff32a..f606df2 100644 --- a/arch/sh/drivers/pci/ops-lboxre2.c +++ b/arch/sh/drivers/pci/ops-lboxre2.c @@ -39,7 +39,7 @@ static struct resource sh7751_mem_resource = { extern struct pci_ops sh7751_pci_ops; struct pci_channel board_pci_channels[] = { - { &sh4_pci_ops, &sh7751_io_resource, &sh7751_mem_resource, 0, 0xff }, + { sh7751_pci_init, &sh4_pci_ops, &sh7751_io_resource, &sh7751_mem_resource, 0, 0xff }, { NULL, NULL, NULL, 0, 0 }, }; diff --git a/arch/sh/drivers/pci/ops-r7780rp.c b/arch/sh/drivers/pci/ops-r7780rp.c index bf32ee8..b51b7e4 100644 --- a/arch/sh/drivers/pci/ops-r7780rp.c +++ b/arch/sh/drivers/pci/ops-r7780rp.c @@ -43,7 +43,7 @@ static struct resource sh7780_mem_resource = { extern struct pci_ops sh7780_pci_ops; struct pci_channel board_pci_channels[] = { - { &sh4_pci_ops, &sh7780_io_resource, &sh7780_mem_resource, 0, 0xff }, + { sh7780_pci_init, &sh4_pci_ops, &sh7780_io_resource, &sh7780_mem_resource, 0, 0xff }, { NULL, NULL, NULL, 0, 0 }, }; EXPORT_SYMBOL(board_pci_channels); diff --git a/arch/sh/drivers/pci/ops-rts7751r2d.c b/arch/sh/drivers/pci/ops-rts7751r2d.c index e4208a6..fe5a231 100644 --- a/arch/sh/drivers/pci/ops-rts7751r2d.c +++ b/arch/sh/drivers/pci/ops-rts7751r2d.c @@ -47,7 +47,7 @@ static struct resource sh7751_mem_resource = { extern struct pci_ops sh7751_pci_ops; struct pci_channel board_pci_channels[] = { - { &sh4_pci_ops, &sh7751_io_resource, &sh7751_mem_resource, 0, 0xff }, + { sh7751_pci_init, &sh4_pci_ops, &sh7751_io_resource, &sh7751_mem_resource, 0, 0xff }, { NULL, NULL, NULL, 0, 0 }, }; EXPORT_SYMBOL(board_pci_channels); diff --git a/arch/sh/drivers/pci/ops-sdk7780.c b/arch/sh/drivers/pci/ops-sdk7780.c index 21d59d4..7277cd1 100644 --- a/arch/sh/drivers/pci/ops-sdk7780.c +++ b/arch/sh/drivers/pci/ops-sdk7780.c @@ -49,7 +49,7 @@ static struct resource sdk7780_mem_resource = { }; struct pci_channel board_pci_channels[] = { - { &sh4_pci_ops, &sdk7780_io_resource, &sdk7780_mem_resource, 0, 0xff }, + { sh7780_pci_init, &sh4_pci_ops, &sdk7780_io_resource, &sdk7780_mem_resource, 0, 0xff }, { NULL, NULL, NULL, 0, 0 }, }; EXPORT_SYMBOL(board_pci_channels); diff --git a/arch/sh/drivers/pci/ops-se7780.c b/arch/sh/drivers/pci/ops-se7780.c index 78a6f2b..76a74fb 100644 --- a/arch/sh/drivers/pci/ops-se7780.c +++ b/arch/sh/drivers/pci/ops-se7780.c @@ -58,7 +58,7 @@ static struct resource se7780_mem_resource = { extern struct pci_ops se7780_pci_ops; struct pci_channel board_pci_channels[] = { - { &sh4_pci_ops, &se7780_io_resource, &se7780_mem_resource, 0, 0xff }, + { sh7780_pci_init, &sh4_pci_ops, &se7780_io_resource, &se7780_mem_resource, 0, 0xff }, { NULL, NULL, NULL, 0, 0 }, }; EXPORT_SYMBOL(board_pci_channels); diff --git a/arch/sh/drivers/pci/ops-sh03.c b/arch/sh/drivers/pci/ops-sh03.c index e1703ff..0218135 100644 --- a/arch/sh/drivers/pci/ops-sh03.c +++ b/arch/sh/drivers/pci/ops-sh03.c @@ -39,7 +39,7 @@ static struct resource sh7751_mem_resource = { extern struct pci_ops sh4_pci_ops; struct pci_channel board_pci_channels[] = { - { &sh4_pci_ops, &sh7751_io_resource, &sh7751_mem_resource, 0, 0xff }, + { sh7751_pci_init, &sh4_pci_ops, &sh7751_io_resource, &sh7751_mem_resource, 0, 0xff }, { NULL, NULL, NULL, 0, 0 }, }; diff --git a/arch/sh/drivers/pci/ops-snapgear.c b/arch/sh/drivers/pci/ops-snapgear.c index cba8015..2e254c6 100644 --- a/arch/sh/drivers/pci/ops-snapgear.c +++ b/arch/sh/drivers/pci/ops-snapgear.c @@ -40,7 +40,7 @@ static struct resource sh7751_mem_resource = { }; struct pci_channel board_pci_channels[] = { - { &sh4_pci_ops, &sh7751_io_resource, &sh7751_mem_resource, 0, 0xff }, + { sh7751_pci_init, &sh4_pci_ops, &sh7751_io_resource, &sh7751_mem_resource, 0, 0xff }, { 0, } }; diff --git a/arch/sh/drivers/pci/ops-titan.c b/arch/sh/drivers/pci/ops-titan.c index 69fcc5c..ffa79bd 100644 --- a/arch/sh/drivers/pci/ops-titan.c +++ b/arch/sh/drivers/pci/ops-titan.c @@ -52,7 +52,7 @@ static struct resource sh7751_mem_resource = { }; struct pci_channel board_pci_channels[] = { - { &sh4_pci_ops, &sh7751_io_resource, &sh7751_mem_resource, 0, 0xff }, + { sh7751_pci_init, &sh4_pci_ops, &sh7751_io_resource, &sh7751_mem_resource, 0, 0xff }, { NULL, NULL, NULL, 0, 0 }, }; EXPORT_SYMBOL(board_pci_channels); diff --git a/arch/sh/drivers/pci/pci-sh5.c b/arch/sh/drivers/pci/pci-sh5.c index 7a97438..008a02e 100644 --- a/arch/sh/drivers/pci/pci-sh5.c +++ b/arch/sh/drivers/pci/pci-sh5.c @@ -27,6 +27,12 @@ unsigned long pcicr_virt; unsigned long PCI_IO_AREA; +int __init sh5_pci_init(struct pci_channel *chan) +{ + pr_debug("PCI: Starting intialization.\n"); + return pcibios_init_platform(); +} + /* Rounds a number UP to the nearest power of two. Used for * sizing the PCI window. */ diff --git a/arch/sh/drivers/pci/pci-sh5.h b/arch/sh/drivers/pci/pci-sh5.h index 7cff3fc..af09f38 100644 --- a/arch/sh/drivers/pci/pci-sh5.h +++ b/arch/sh/drivers/pci/pci-sh5.h @@ -108,6 +108,7 @@ extern unsigned long pcicr_virt; extern struct pci_ops sh5_pci_ops; /* arch/sh/drivers/pci/pci-sh5.c */ +int sh5_pci_init(struct pci_channel *chan); int sh5pci_init(unsigned long memStart, unsigned long memSize); #endif /* __PCI_SH5_H */ diff --git a/arch/sh/drivers/pci/pci-sh7751.c b/arch/sh/drivers/pci/pci-sh7751.c index 9c2c014..230db8b 100644 --- a/arch/sh/drivers/pci/pci-sh7751.c +++ b/arch/sh/drivers/pci/pci-sh7751.c @@ -32,7 +32,7 @@ * space mapping) will be called via the platform defined function * pcibios_init_platform(). */ -static int __init sh7751_pci_init(void) +int __init sh7751_pci_init(struct pci_channel *chan) { unsigned int id; int ret; @@ -40,19 +40,18 @@ static int __init sh7751_pci_init(void) pr_debug("PCI: Starting intialization.\n"); /* check for SH7751/SH7751R hardware */ - id = pci_read_reg(NULL, SH7751_PCICONF0); + id = pci_read_reg(chan, SH7751_PCICONF0); if (id != ((SH7751_DEVICE_ID << 16) | SH7751_VENDOR_ID) && id != ((SH7751R_DEVICE_ID << 16) | SH7751_VENDOR_ID)) { pr_debug("PCI: This is not an SH7751(R) (%x)\n", id); return -ENODEV; } - if ((ret = sh4_pci_check_direct(NULL)) != 0) + if ((ret = sh4_pci_check_direct(chan)) != 0) return ret; return pcibios_init_platform(); } -subsys_initcall(sh7751_pci_init); static int __init __area_sdram_check(struct pci_channel *chan, unsigned int area) @@ -178,7 +177,7 @@ int __init sh7751_pcic_init(struct pci_channel *chan, } if (!word) - return 0; + return -1; /* configure the wait control registers */ word = ctrl_inl(SH7751_WCR1); @@ -202,5 +201,5 @@ int __init sh7751_pcic_init(struct pci_channel *chan, word = SH4_PCICR_PREFIX | SH4_PCICR_CFIN | SH4_PCICR_ARBM; pci_write_reg(chan, word, SH4_PCICR); - return 1; + return 0; } diff --git a/arch/sh/drivers/pci/pci-sh7751.h b/arch/sh/drivers/pci/pci-sh7751.h index 6f101e5..0ea4387 100644 --- a/arch/sh/drivers/pci/pci-sh7751.h +++ b/arch/sh/drivers/pci/pci-sh7751.h @@ -130,6 +130,7 @@ struct sh4_pci_address_map; /* arch/sh/drivers/pci/pci-sh7751.c */ +int sh7751_pci_init(struct pci_channel *chan); int sh7751_pcic_init(struct pci_channel *chan, struct sh4_pci_address_map *map); diff --git a/arch/sh/drivers/pci/pci-sh7780.c b/arch/sh/drivers/pci/pci-sh7780.c index 56f673f..4706e88 100644 --- a/arch/sh/drivers/pci/pci-sh7780.c +++ b/arch/sh/drivers/pci/pci-sh7780.c @@ -45,7 +45,7 @@ * space mapping) will be called via the platform defined function * pcibios_init_platform(). */ -static int __init sh7780_pci_init(void) +int __init sh7780_pci_init(struct pci_channel *chan) { unsigned int id; int ret, match = 0; @@ -55,7 +55,7 @@ static int __init sh7780_pci_init(void) ctrl_outl(0x00000001, SH7780_PCI_VCR2); /* Enable PCIC */ /* check for SH7780/SH7780R hardware */ - id = pci_read_reg(NULL, SH7780_PCIVID); + id = pci_read_reg(chan, SH7780_PCIVID); if ((id & 0xffff) == SH7780_VENDOR_ID) { switch ((id >> 16) & 0xffff) { case SH7763_DEVICE_ID: @@ -82,12 +82,11 @@ static int __init sh7780_pci_init(void) ctrl_outl(0x33333333, INTC_INTPRI); } - if ((ret = sh4_pci_check_direct(NULL)) != 0) + if ((ret = sh4_pci_check_direct(chan)) != 0) return ret; return pcibios_init_platform(); } -core_initcall(sh7780_pci_init); int __init sh7780_pcic_init(struct pci_channel *chan, struct sh4_pci_address_map *map) @@ -153,5 +152,5 @@ int __init sh7780_pcic_init(struct pci_channel *chan, word = SH4_PCICR_PREFIX | SH4_PCICR_CFIN | SH4_PCICR_FTO; pci_write_reg(chan, word, SH4_PCICR); - return 1; + return 0; } diff --git a/arch/sh/drivers/pci/pci-sh7780.h b/arch/sh/drivers/pci/pci-sh7780.h index d349611..2f3c920 100644 --- a/arch/sh/drivers/pci/pci-sh7780.h +++ b/arch/sh/drivers/pci/pci-sh7780.h @@ -109,6 +109,7 @@ struct sh4_pci_address_map; /* arch/sh/drivers/pci/pci-sh7780.c */ +int sh7780_pci_init(struct pci_channel *chan); int sh7780_pcic_init(struct pci_channel *chan, struct sh4_pci_address_map *map); diff --git a/arch/sh/drivers/pci/pci.c b/arch/sh/drivers/pci/pci.c index 0d6ac7a1..29ec16e 100644 --- a/arch/sh/drivers/pci/pci.c +++ b/arch/sh/drivers/pci/pci.c @@ -28,18 +28,31 @@ static int __init pcibios_init(void) struct pci_bus *bus; int busno; + /* init channels */ + busno = 0; + for (p = board_pci_channels; p->init; p++) { + if (p->init(p) == 0) + p->enabled = 1; + else + pr_err("Unable to init pci channel %d\n", busno); + busno++; + } + #ifdef CONFIG_PCI_AUTO /* assign resources */ busno = 0; - for (p = board_pci_channels; p->pci_ops != NULL; p++) - busno = pciauto_assign_resources(busno, p) + 1; + for (p = board_pci_channels; p->init; p++) + if (p->enabled) + busno = pciauto_assign_resources(busno, p) + 1; #endif /* scan the buses */ busno = 0; - for (p = board_pci_channels; p->pci_ops != NULL; p++) { - bus = pci_scan_bus(busno, p->pci_ops, p); - busno = bus->subordinate + 1; + for (p = board_pci_channels; p->init; p++) { + if (p->enabled) { + bus = pci_scan_bus(busno, p->pci_ops, p); + busno = bus->subordinate + 1; + } } pci_fixup_irqs(pci_common_swizzle, pcibios_map_platform_irq); diff --git a/arch/sh/include/asm/pci.h b/arch/sh/include/asm/pci.h index df1d383..5c7a8f1 100644 --- a/arch/sh/include/asm/pci.h +++ b/arch/sh/include/asm/pci.h @@ -17,11 +17,13 @@ * external) PCI controllers. */ struct pci_channel { + int (*init)(struct pci_channel *chan); struct pci_ops *pci_ops; struct resource *io_resource; struct resource *mem_resource; int first_devfn; int last_devfn; + int enabled; }; /* -- cgit v0.10.2 From 710fa3c81151948ac4d836ef52b57cef91b0ab72 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Wed, 11 Mar 2009 15:47:23 +0900 Subject: sh: avoid using PCIBIOS_MIN_xxx Replaces PCIBIOS_MIN_IO and PCIBIOS_MIN_MEM with direct struct pci_channel access. This allows us to have more than one pci channel. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt diff --git a/arch/sh/drivers/pci/fixups-r7780rp.c b/arch/sh/drivers/pci/fixups-r7780rp.c index 5b25021..31f8dfb 100644 --- a/arch/sh/drivers/pci/fixups-r7780rp.c +++ b/arch/sh/drivers/pci/fixups-r7780rp.c @@ -37,7 +37,7 @@ int pci_fixup_pcic(struct pci_channel *chan) #endif /* Set IOBR for windows containing area specified in pci.h */ - pci_write_reg(chan, (PCIBIOS_MIN_IO & ~(SH7780_PCI_IO_SIZE - 1)), + pci_write_reg(chan, chan->io_resource->start & ~(SH7780_PCI_IO_SIZE-1), SH7780_PCIIOBR); pci_write_reg(chan, ((SH7780_PCI_IO_SIZE-1) & (7<<18)), SH7780_PCIIOBMR); diff --git a/arch/sh/drivers/pci/fixups-sdk7780.c b/arch/sh/drivers/pci/fixups-sdk7780.c index 3f6754a..c295731 100644 --- a/arch/sh/drivers/pci/fixups-sdk7780.c +++ b/arch/sh/drivers/pci/fixups-sdk7780.c @@ -50,7 +50,7 @@ int pci_fixup_pcic(struct pci_channel *chan) pci_write_reg(chan, 0x00FC0000 , SH7780_PCIMBMR0); /* 16M */ /* Set IOBR for window containing area specified in pci.h */ - pci_write_reg(chan, PCIBIOS_MIN_IO & ~(SH7780_PCI_IO_SIZE-1), + pci_write_reg(chan, chan->io_resource->start & ~(SH7780_PCI_IO_SIZE-1), SH7780_PCIIOBR); pci_write_reg(chan, (SH7780_PCI_IO_SIZE-1) & (7 << 18), SH7780_PCIIOBMR); diff --git a/arch/sh/drivers/pci/fixups-se7780.c b/arch/sh/drivers/pci/fixups-se7780.c index b8e735e..a968af7 100644 --- a/arch/sh/drivers/pci/fixups-se7780.c +++ b/arch/sh/drivers/pci/fixups-se7780.c @@ -51,7 +51,7 @@ int pci_fixup_pcic(struct pci_channel *chan) pci_write_reg(chan, 0x00FC0000 , SH7780_PCIMBMR0); /* 16M */ /* Set IOBR for window containing area specified in pci.h */ - pci_write_reg(chan, PCIBIOS_MIN_IO & ~(SH7780_PCI_IO_SIZE-1), + pci_write_reg(chan, chan->io_resource->start & ~(SH7780_PCI_IO_SIZE-1), SH7780_PCIIOBR); pci_write_reg(chan, (SH7780_PCI_IO_SIZE-1) & (7 << 18), SH7780_PCIIOBMR); diff --git a/arch/sh/drivers/pci/pci-sh5.c b/arch/sh/drivers/pci/pci-sh5.c index 008a02e..7750da2 100644 --- a/arch/sh/drivers/pci/pci-sh5.c +++ b/arch/sh/drivers/pci/pci-sh5.c @@ -206,6 +206,9 @@ int __init sh5pci_init(unsigned long memStart, unsigned long memSize) return 0; } +#define xPCIBIOS_MIN_IO board_pci_channels->io_resource->start +#define xPCIBIOS_MIN_MEM board_pci_channels->mem_resource->start + void __devinit pcibios_fixup_bus(struct pci_bus *bus) { struct pci_dev *dev = bus->self; @@ -223,9 +226,9 @@ void __devinit pcibios_fixup_bus(struct pci_bus *bus) /* For now, propagate host limits to the bus; * we'll adjust them later. */ bus->resource[0]->end = 64*1024 - 1 ; - bus->resource[1]->end = PCIBIOS_MIN_MEM+(256*1024*1024)-1; - bus->resource[0]->start = PCIBIOS_MIN_IO; - bus->resource[1]->start = PCIBIOS_MIN_MEM; + bus->resource[1]->end = xPCIBIOS_MIN_MEM+(256*1024*1024)-1; + bus->resource[0]->start = xPCIBIOS_MIN_IO; + bus->resource[1]->start = xPCIBIOS_MIN_MEM; /* Turn off downstream PF memory address range by default */ bus->resource[2]->start = 1024*1024; diff --git a/arch/sh/drivers/pci/pci-sh7751.c b/arch/sh/drivers/pci/pci-sh7751.c index 230db8b..447234c 100644 --- a/arch/sh/drivers/pci/pci-sh7751.c +++ b/arch/sh/drivers/pci/pci-sh7751.c @@ -144,22 +144,20 @@ int __init sh7751_pcic_init(struct pci_channel *chan, /* Set the local 16MB PCI memory space window to * the lowest PCI mapped address */ - word = PCIBIOS_MIN_MEM & SH4_PCIMBR_MASK; + word = chan->mem_resource->start & SH4_PCIMBR_MASK; pr_debug("PCI: Setting upper bits of Memory window to 0x%x\n", word); pci_write_reg(chan, word , SH4_PCIMBR); - /* Map IO space into PCI IO window - * The IO window is 64K-PCIBIOS_MIN_IO in size - * IO addresses will be translated to the - * PCI IO window base address + /* Map IO space into PCI IO window: + * IO addresses will be translated to the PCI IO window base address */ pr_debug("PCI: Mapping IO address 0x%x - 0x%x to base 0x%x\n", - PCIBIOS_MIN_IO, (64 << 10), - SH7751_PCI_IO_BASE + PCIBIOS_MIN_IO); + chan->io_resource->start, chan->io_resource->end, + SH7751_PCI_IO_BASE + chan->io_resource->start); /* Make sure the MSB's of IO window are set to access PCI space * correctly */ - word = PCIBIOS_MIN_IO & SH4_PCIIOBR_MASK; + word = chan->io_resource->start & SH4_PCIIOBR_MASK; pr_debug("PCI: Setting upper bits of IO window to 0x%x\n", word); pci_write_reg(chan, word, SH4_PCIIOBR); diff --git a/arch/sh/drivers/pci/pci-sh7780.c b/arch/sh/drivers/pci/pci-sh7780.c index 4706e88..e8f3a30 100644 --- a/arch/sh/drivers/pci/pci-sh7780.c +++ b/arch/sh/drivers/pci/pci-sh7780.c @@ -130,14 +130,12 @@ int __init sh7780_pcic_init(struct pci_channel *chan, pci_write_reg(chan, map->window1.base, SH4_PCILAR1); pci_write_reg(chan, map->window1.base, SH7780_PCIMBAR1); - /* Map IO space into PCI IO window - * The IO window is 64K-PCIBIOS_MIN_IO in size - * IO addresses will be translated to the - * PCI IO window base address + /* Map IO space into PCI IO window: + * IO addresses will be translated to the PCI IO window base address */ pr_debug("PCI: Mapping IO address 0x%x - 0x%x to base 0x%x\n", - PCIBIOS_MIN_IO, (64 << 10), - SH7780_PCI_IO_BASE + PCIBIOS_MIN_IO); + chan->io_resource->start, chan->io_resource->end, + SH7780_PCI_IO_BASE + chan->io_resource->start); /* NOTE: I'm ignoring the PCI error IRQs for now.. * TODO: add support for the internal error interrupts and -- cgit v0.10.2 From b6706ef10f75921733d7275fd45d268f2f6254c8 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Tue, 19 Feb 2008 21:34:55 +0900 Subject: sh: hook in struct pci_channel in sysdata Store a struct pci_channel pointer in bus->sysdata. This makes whatever struct pci_channel assigned to a bus available for sh4_pci_read() and sh4_pci_write(). We also modify PCIBIOS_MIN_IO and PCIBIOS_MIN_MEM to use bus->sysdata - this to gives us support for multiple pci channels. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt diff --git a/arch/sh/drivers/pci/ops-sh4.c b/arch/sh/drivers/pci/ops-sh4.c index 92d27f7..ee62e6d 100644 --- a/arch/sh/drivers/pci/ops-sh4.c +++ b/arch/sh/drivers/pci/ops-sh4.c @@ -26,6 +26,7 @@ static DEFINE_SPINLOCK(sh4_pci_lock); static int sh4_pci_read(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 *val) { + struct pci_channel *chan = bus->sysdata; unsigned long flags; u32 data; @@ -34,8 +35,8 @@ static int sh4_pci_read(struct pci_bus *bus, unsigned int devfn, * so we must do byte alignment by hand */ spin_lock_irqsave(&sh4_pci_lock, flags); - pci_write_reg(NULL, CONFIG_CMD(bus, devfn, where), SH4_PCIPAR); - data = pci_read_reg(NULL, SH4_PCIPDR); + pci_write_reg(chan, CONFIG_CMD(bus, devfn, where), SH4_PCIPAR); + data = pci_read_reg(chan, SH4_PCIPDR); spin_unlock_irqrestore(&sh4_pci_lock, flags); switch (size) { @@ -63,13 +64,14 @@ static int sh4_pci_read(struct pci_bus *bus, unsigned int devfn, static int sh4_pci_write(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 val) { + struct pci_channel *chan = bus->sysdata; unsigned long flags; int shift; u32 data; spin_lock_irqsave(&sh4_pci_lock, flags); - pci_write_reg(NULL, CONFIG_CMD(bus, devfn, where), SH4_PCIPAR); - data = pci_read_reg(NULL, SH4_PCIPDR); + pci_write_reg(chan, CONFIG_CMD(bus, devfn, where), SH4_PCIPAR); + data = pci_read_reg(chan, SH4_PCIPDR); spin_unlock_irqrestore(&sh4_pci_lock, flags); switch (size) { @@ -90,7 +92,7 @@ static int sh4_pci_write(struct pci_bus *bus, unsigned int devfn, return PCIBIOS_FUNC_NOT_SUPPORTED; } - pci_write_reg(NULL, data, SH4_PCIPDR); + pci_write_reg(chan, data, SH4_PCIPDR); return PCIBIOS_SUCCESSFUL; } diff --git a/arch/sh/drivers/pci/pci-auto.c b/arch/sh/drivers/pci/pci-auto.c index cf48b12..1d715ec 100644 --- a/arch/sh/drivers/pci/pci-auto.c +++ b/arch/sh/drivers/pci/pci-auto.c @@ -67,6 +67,7 @@ static struct pci_dev *fake_pci_dev(struct pci_channel *hose, dev.devfn = devfn; bus.number = busnr; bus.ops = hose->pci_ops; + bus.sysdata = hose; if(busnr != top_bus) /* Fake a parent bus structure. */ diff --git a/arch/sh/include/asm/pci.h b/arch/sh/include/asm/pci.h index 5c7a8f1..386587e 100644 --- a/arch/sh/include/asm/pci.h +++ b/arch/sh/include/asm/pci.h @@ -31,8 +31,10 @@ struct pci_channel { */ extern struct pci_channel board_pci_channels[]; -#define PCIBIOS_MIN_IO board_pci_channels->io_resource->start -#define PCIBIOS_MIN_MEM board_pci_channels->mem_resource->start +/* ugly as hell, but makes drivers/pci/setup-res.c compile and work */ +#define __PCI_CHAN(bus) ((struct pci_channel *)bus->sysdata) +#define PCIBIOS_MIN_IO __PCI_CHAN(bus)->io_resource->start +#define PCIBIOS_MIN_MEM __PCI_CHAN(bus)->mem_resource->start /* * I/O routine helpers -- cgit v0.10.2 From e4c6a3604e07185046e2ce4be82a201f4447d788 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Tue, 19 Feb 2008 21:35:04 +0900 Subject: sh: add reg_base member to pci_channel Store the base address of the pci host controller registers in struct pci_channel and use the address in pci_read_reg() and pci_write_reg(). Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt diff --git a/arch/sh/drivers/pci/ops-sh4.c b/arch/sh/drivers/pci/ops-sh4.c index ee62e6d..540683d 100644 --- a/arch/sh/drivers/pci/ops-sh4.c +++ b/arch/sh/drivers/pci/ops-sh4.c @@ -121,8 +121,8 @@ int __init sh4_pci_check_direct(struct pci_channel *chan) if (pci_read_reg(chan, SH4_PCIPAR) == P1SEG) { pci_write_reg(chan, tmp, SH4_PCIPAR); printk(KERN_INFO "PCI: Using configuration type 1\n"); - request_region(PCI_REG(SH4_PCIPAR), 8, "PCI conf1"); - + request_region(chan->reg_base + SH4_PCIPAR, 8, + "PCI conf1"); return 0; } diff --git a/arch/sh/drivers/pci/pci-sh4.h b/arch/sh/drivers/pci/pci-sh4.h index 62ba350..90abfe3 100644 --- a/arch/sh/drivers/pci/pci-sh4.h +++ b/arch/sh/drivers/pci/pci-sh4.h @@ -171,13 +171,13 @@ struct sh4_pci_address_map { static inline void pci_write_reg(struct pci_channel *chan, unsigned long val, unsigned long reg) { - ctrl_outl(val, PCI_REG(reg)); + ctrl_outl(val, chan->reg_base + reg); } static inline unsigned long pci_read_reg(struct pci_channel *chan, unsigned long reg) { - return ctrl_inl(PCI_REG(reg)); + return ctrl_inl(chan->reg_base + reg); } #endif /* __PCI_SH4_H */ diff --git a/arch/sh/drivers/pci/pci-sh7751.c b/arch/sh/drivers/pci/pci-sh7751.c index 447234c..201266b 100644 --- a/arch/sh/drivers/pci/pci-sh7751.c +++ b/arch/sh/drivers/pci/pci-sh7751.c @@ -39,6 +39,8 @@ int __init sh7751_pci_init(struct pci_channel *chan) pr_debug("PCI: Starting intialization.\n"); + chan->reg_base = 0xfe200000; + /* check for SH7751/SH7751R hardware */ id = pci_read_reg(chan, SH7751_PCICONF0); if (id != ((SH7751_DEVICE_ID << 16) | SH7751_VENDOR_ID) && diff --git a/arch/sh/drivers/pci/pci-sh7751.h b/arch/sh/drivers/pci/pci-sh7751.h index 0ea4387..c390dd2 100644 --- a/arch/sh/drivers/pci/pci-sh7751.h +++ b/arch/sh/drivers/pci/pci-sh7751.h @@ -26,7 +26,6 @@ #define SH7751_PCI_IO_SIZE 0x40000 /* Size of IO window */ #define SH7751_PCIREG_BASE 0xFE200000 /* PCI regs base address */ -#define PCI_REG(n) (SH7751_PCIREG_BASE+ n) #define SH7751_PCICONF0 0x0 /* PCI Config Reg 0 */ #define SH7751_PCICONF0_DEVID 0xFFFF0000 /* Device ID */ diff --git a/arch/sh/drivers/pci/pci-sh7780.c b/arch/sh/drivers/pci/pci-sh7780.c index e8f3a30..9d6483a 100644 --- a/arch/sh/drivers/pci/pci-sh7780.c +++ b/arch/sh/drivers/pci/pci-sh7780.c @@ -52,6 +52,8 @@ int __init sh7780_pci_init(struct pci_channel *chan) pr_debug("PCI: Starting intialization.\n"); + chan->reg_base = 0xfe040000; + ctrl_outl(0x00000001, SH7780_PCI_VCR2); /* Enable PCIC */ /* check for SH7780/SH7780R hardware */ diff --git a/arch/sh/drivers/pci/pci-sh7780.h b/arch/sh/drivers/pci/pci-sh7780.h index 2f3c920..fffcf1d 100644 --- a/arch/sh/drivers/pci/pci-sh7780.h +++ b/arch/sh/drivers/pci/pci-sh7780.h @@ -35,7 +35,6 @@ #define SH7780_PCI_IO_SIZE 0x00400000 /* Size of IO window */ #define SH7780_PCIREG_BASE 0xFE040000 /* PCI regs base address */ -#define PCI_REG(n) (SH7780_PCIREG_BASE+n) /* SH7780 PCI Config Registers */ #define SH7780_PCIVID 0x000 /* Vendor ID */ diff --git a/arch/sh/include/asm/pci.h b/arch/sh/include/asm/pci.h index 386587e..8e9e0ed 100644 --- a/arch/sh/include/asm/pci.h +++ b/arch/sh/include/asm/pci.h @@ -24,6 +24,7 @@ struct pci_channel { int first_devfn; int last_devfn; int enabled; + unsigned long reg_base; }; /* -- cgit v0.10.2 From ef53fdeb7e0cb139aff33665635b886700137abb Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Tue, 19 Feb 2008 21:35:14 +0900 Subject: sh: add io_base member to pci_channel Store the io window base address in struct pci_channel and use that one instead of SH77xx_PCI_IO_BASE. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt diff --git a/arch/sh/drivers/pci/pci-sh7751.c b/arch/sh/drivers/pci/pci-sh7751.c index 201266b..2a6c7aa 100644 --- a/arch/sh/drivers/pci/pci-sh7751.c +++ b/arch/sh/drivers/pci/pci-sh7751.c @@ -40,6 +40,7 @@ int __init sh7751_pci_init(struct pci_channel *chan) pr_debug("PCI: Starting intialization.\n"); chan->reg_base = 0xfe200000; + chan->io_base = 0xfe240000; /* check for SH7751/SH7751R hardware */ id = pci_read_reg(chan, SH7751_PCICONF0); @@ -153,9 +154,9 @@ int __init sh7751_pcic_init(struct pci_channel *chan, /* Map IO space into PCI IO window: * IO addresses will be translated to the PCI IO window base address */ - pr_debug("PCI: Mapping IO address 0x%x - 0x%x to base 0x%x\n", + pr_debug("PCI: Mapping IO address 0x%x - 0x%x to base 0x%lx\n", chan->io_resource->start, chan->io_resource->end, - SH7751_PCI_IO_BASE + chan->io_resource->start); + chan->io_base + chan->io_resource->start); /* Make sure the MSB's of IO window are set to access PCI space * correctly */ diff --git a/arch/sh/drivers/pci/pci-sh7780.c b/arch/sh/drivers/pci/pci-sh7780.c index 9d6483a..87a7f3b 100644 --- a/arch/sh/drivers/pci/pci-sh7780.c +++ b/arch/sh/drivers/pci/pci-sh7780.c @@ -53,6 +53,7 @@ int __init sh7780_pci_init(struct pci_channel *chan) pr_debug("PCI: Starting intialization.\n"); chan->reg_base = 0xfe040000; + chan->io_base = 0xfe200000; ctrl_outl(0x00000001, SH7780_PCI_VCR2); /* Enable PCIC */ @@ -135,9 +136,9 @@ int __init sh7780_pcic_init(struct pci_channel *chan, /* Map IO space into PCI IO window: * IO addresses will be translated to the PCI IO window base address */ - pr_debug("PCI: Mapping IO address 0x%x - 0x%x to base 0x%x\n", + pr_debug("PCI: Mapping IO address 0x%x - 0x%x to base 0x%lx\n", chan->io_resource->start, chan->io_resource->end, - SH7780_PCI_IO_BASE + chan->io_resource->start); + chan->io_base + chan->io_resource->start); /* NOTE: I'm ignoring the PCI error IRQs for now.. * TODO: add support for the internal error interrupts and diff --git a/arch/sh/include/asm/pci.h b/arch/sh/include/asm/pci.h index 8e9e0ed..84d12eb 100644 --- a/arch/sh/include/asm/pci.h +++ b/arch/sh/include/asm/pci.h @@ -25,6 +25,7 @@ struct pci_channel { int last_devfn; int enabled; unsigned long reg_base; + unsigned long io_base; }; /* -- cgit v0.10.2 From ef339f241b08a16af58897e6288ba200e0c7a8c7 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Tue, 19 Feb 2008 21:35:22 +0900 Subject: sh: pci memory range checking code This patch changes the code to use __is_pci_memory() instead of is_pci_memaddr(). __is_pci_memory() loops through all the pci channels on the system to match memory windows. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt diff --git a/arch/sh/boards/mach-titan/io.c b/arch/sh/boards/mach-titan/io.c index 4badad4..053b3ed 100644 --- a/arch/sh/boards/mach-titan/io.c +++ b/arch/sh/boards/mach-titan/io.c @@ -117,7 +117,7 @@ void titan_outsl(unsigned long port, const void *src, unsigned long count) void __iomem *titan_ioport_map(unsigned long port, unsigned int size) { - if (PXSEG(port) || is_pci_memaddr(port)) + if (PXSEG(port)) return (void __iomem *)port; else if (is_pci_ioaddr(port)) return (void __iomem *)pci_ioaddr(port); diff --git a/arch/sh/drivers/pci/pci.c b/arch/sh/drivers/pci/pci.c index 29ec16e..b9aca54 100644 --- a/arch/sh/drivers/pci/pci.c +++ b/arch/sh/drivers/pci/pci.c @@ -167,9 +167,8 @@ void __iomem *pci_iomap(struct pci_dev *dev, int bar, unsigned long maxlen) /* * Presently the IORESOURCE_MEM case is a bit special, most * SH7751 style PCI controllers have PCI memory at a fixed - * location in the address space where no remapping is desired - * (typically at 0xfd000000, but is_pci_memaddr() will know - * best). With the IORESOURCE_MEM case more care has to be taken + * location in the address space where no remapping is desired. + * With the IORESOURCE_MEM case more care has to be taken * to inhibit page table mapping for legacy cores, but this is * punted off to __ioremap(). * -- PFM. diff --git a/arch/sh/include/asm/pci.h b/arch/sh/include/asm/pci.h index 84d12eb..ccf5c5f 100644 --- a/arch/sh/include/asm/pci.h +++ b/arch/sh/include/asm/pci.h @@ -61,12 +61,8 @@ extern unsigned long PCI_IO_AREA; #define is_pci_ioaddr(port) \ (((port) >= PCIBIOS_MIN_IO) && \ ((port) < (PCIBIOS_MIN_IO + PCI_IO_SIZE))) -#define is_pci_memaddr(port) \ - (((port) >= PCIBIOS_MIN_MEM) && \ - ((port) < (PCIBIOS_MIN_MEM + PCI_MEM_SIZE))) #else #define is_pci_ioaddr(port) (0) -#define is_pci_memaddr(port) (0) #endif struct pci_dev; @@ -127,6 +123,25 @@ static inline void pci_dma_burst_advice(struct pci_dev *pdev, *strat = PCI_DMA_BURST_INFINITY; *strategy_parameter = ~0UL; } + +static inline int __is_pci_memory(unsigned long phys_addr, unsigned long size) +{ + struct pci_channel *p; + struct resource *res; + + for (p = board_pci_channels; p->init; p++) { + res = p->mem_resource; + if (p->enabled && (phys_addr >= res->start) && + (phys_addr + size) <= (res->end + 1)) + return 1; + } + return 0; +} +#else +static inline int __is_pci_memory(unsigned long phys_addr, unsigned long size) +{ + return 0; +} #endif /* Board-specific fixup routines. */ diff --git a/arch/sh/mm/ioremap_32.c b/arch/sh/mm/ioremap_32.c index 60cc486..7e04cc8 100644 --- a/arch/sh/mm/ioremap_32.c +++ b/arch/sh/mm/ioremap_32.c @@ -56,7 +56,7 @@ void __iomem *__ioremap(unsigned long phys_addr, unsigned long size, * P1/P2 space, ioremap() will already do the right thing, * and we'll never get this far. */ - if (is_pci_memaddr(phys_addr) && is_pci_memaddr(last_addr)) + if (__is_pci_memory(phys_addr, size)) return (void __iomem *)phys_addr; #if !defined(CONFIG_PMB_FIXED) @@ -121,7 +121,7 @@ void __iounmap(void __iomem *addr) unsigned long seg = PXSEG(vaddr); struct vm_struct *p; - if (seg < P3SEG || vaddr >= P3_ADDR_MAX || is_pci_memaddr(vaddr)) + if (seg < P3SEG || vaddr >= P3_ADDR_MAX || __is_pci_memory(vaddr, 0)) return; #ifdef CONFIG_PMB -- cgit v0.10.2 From 8ce0143b11cdc519b8e1fd94a262b654ef0bc3ab Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Tue, 19 Feb 2008 21:35:31 +0900 Subject: sh: pci io port base address code Adds a __get_pci_io_base() function which is used to match a port range against struct pci_channel. This allows us to detect if a port range is assigned to pci or happens to be legacy port io. While at it, remove unused cpu-specific cruft. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt diff --git a/arch/sh/drivers/pci/ops-rts7751r2d.c b/arch/sh/drivers/pci/ops-rts7751r2d.c index fe5a231..58ed1d5 100644 --- a/arch/sh/drivers/pci/ops-rts7751r2d.c +++ b/arch/sh/drivers/pci/ops-rts7751r2d.c @@ -68,7 +68,6 @@ static struct sh4_pci_address_map sh7751_pci_map = { int __init pcibios_init_platform(void) { - __set_io_port_base(SH7751_PCI_IO_BASE); return sh7751_pcic_init(&board_pci_channels[0], &sh7751_pci_map); } diff --git a/arch/sh/include/asm/pci.h b/arch/sh/include/asm/pci.h index ccf5c5f..bb2c2fc 100644 --- a/arch/sh/include/asm/pci.h +++ b/arch/sh/include/asm/pci.h @@ -38,33 +38,6 @@ extern struct pci_channel board_pci_channels[]; #define PCIBIOS_MIN_IO __PCI_CHAN(bus)->io_resource->start #define PCIBIOS_MIN_MEM __PCI_CHAN(bus)->mem_resource->start -/* - * I/O routine helpers - */ -#if defined(CONFIG_CPU_SUBTYPE_SH7780) || defined(CONFIG_CPU_SUBTYPE_SH7785) -#define PCI_IO_AREA 0xFE400000 -#define PCI_IO_SIZE 0x00400000 -#elif defined(CONFIG_CPU_SH5) -extern unsigned long PCI_IO_AREA; -#define PCI_IO_SIZE 0x00010000 -#else -#define PCI_IO_AREA 0xFE240000 -#define PCI_IO_SIZE 0x00040000 -#endif - -#define PCI_MEM_SIZE 0x01000000 - -#define SH4_PCIIOBR_MASK 0xFFFC0000 -#define pci_ioaddr(addr) (PCI_IO_AREA + (addr & ~SH4_PCIIOBR_MASK)) - -#if defined(CONFIG_PCI) -#define is_pci_ioaddr(port) \ - (((port) >= PCIBIOS_MIN_IO) && \ - ((port) < (PCIBIOS_MIN_IO + PCI_IO_SIZE))) -#else -#define is_pci_ioaddr(port) (0) -#endif - struct pci_dev; extern void pcibios_set_master(struct pci_dev *dev); @@ -137,11 +110,31 @@ static inline int __is_pci_memory(unsigned long phys_addr, unsigned long size) } return 0; } + +static inline void __iomem *__get_pci_io_base(unsigned long port, + unsigned long size) +{ + struct pci_channel *p; + struct resource *res; + + for (p = board_pci_channels; p->init; p++) { + res = p->io_resource; + if (p->enabled && (port >= res->start) && + (port + size) <= (res->end + 1)) + return (void __iomem *)(p->io_base + port); + } + return NULL; +} #else static inline int __is_pci_memory(unsigned long phys_addr, unsigned long size) { return 0; } +static inline void __iomem *__get_pci_io_base(unsigned long port, + unsigned long size) +{ + return NULL; +} #endif /* Board-specific fixup routines. */ diff --git a/arch/sh/kernel/io.c b/arch/sh/kernel/io.c index 29cf458..59fb020 100644 --- a/arch/sh/kernel/io.c +++ b/arch/sh/kernel/io.c @@ -12,6 +12,7 @@ * for more details. */ #include +#include #include #include @@ -69,6 +70,10 @@ void __iomem *ioport_map(unsigned long port, unsigned int nr) if (ret) return ret; + ret = __get_pci_io_base(port, nr); + if (ret) + return ret; + return __ioport_map(port, nr); } EXPORT_SYMBOL(ioport_map); -- cgit v0.10.2 From aa5d3ff99cc1f3dfe262ab9dd9179131fcfe39fd Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Tue, 19 Feb 2008 21:35:40 +0900 Subject: sh: export board_pci_channels in one place Instead of sometimes exporting board_pci_channels[] in the board specific code just export it in one place. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt diff --git a/arch/sh/drivers/pci/ops-cayman.c b/arch/sh/drivers/pci/ops-cayman.c index f4a5e14..cbaaf02 100644 --- a/arch/sh/drivers/pci/ops-cayman.c +++ b/arch/sh/drivers/pci/ops-cayman.c @@ -80,7 +80,6 @@ struct pci_channel board_pci_channels[] = { { sh5_pci_init, &sh5_pci_ops, NULL, NULL, 0, 0xff }, { NULL, NULL, NULL, 0, 0 }, }; -EXPORT_SYMBOL(board_pci_channels); int __init pcibios_init_platform(void) { diff --git a/arch/sh/drivers/pci/ops-lboxre2.c b/arch/sh/drivers/pci/ops-lboxre2.c index f606df2..781496b 100644 --- a/arch/sh/drivers/pci/ops-lboxre2.c +++ b/arch/sh/drivers/pci/ops-lboxre2.c @@ -43,8 +43,6 @@ struct pci_channel board_pci_channels[] = { { NULL, NULL, NULL, 0, 0 }, }; -EXPORT_SYMBOL(board_pci_channels); - static struct sh4_pci_address_map sh7751_pci_map = { .window0 = { .base = SH7751_CS3_BASE_ADDR, diff --git a/arch/sh/drivers/pci/ops-r7780rp.c b/arch/sh/drivers/pci/ops-r7780rp.c index b51b7e4..c58f1cf 100644 --- a/arch/sh/drivers/pci/ops-r7780rp.c +++ b/arch/sh/drivers/pci/ops-r7780rp.c @@ -46,7 +46,6 @@ struct pci_channel board_pci_channels[] = { { sh7780_pci_init, &sh4_pci_ops, &sh7780_io_resource, &sh7780_mem_resource, 0, 0xff }, { NULL, NULL, NULL, 0, 0 }, }; -EXPORT_SYMBOL(board_pci_channels); static struct sh4_pci_address_map sh7780_pci_map = { .window0 = { diff --git a/arch/sh/drivers/pci/ops-rts7751r2d.c b/arch/sh/drivers/pci/ops-rts7751r2d.c index 58ed1d5..d374cd3 100644 --- a/arch/sh/drivers/pci/ops-rts7751r2d.c +++ b/arch/sh/drivers/pci/ops-rts7751r2d.c @@ -50,7 +50,6 @@ struct pci_channel board_pci_channels[] = { { sh7751_pci_init, &sh4_pci_ops, &sh7751_io_resource, &sh7751_mem_resource, 0, 0xff }, { NULL, NULL, NULL, 0, 0 }, }; -EXPORT_SYMBOL(board_pci_channels); static struct sh4_pci_address_map sh7751_pci_map = { .window0 = { diff --git a/arch/sh/drivers/pci/ops-sdk7780.c b/arch/sh/drivers/pci/ops-sdk7780.c index 7277cd1..b34fbc5 100644 --- a/arch/sh/drivers/pci/ops-sdk7780.c +++ b/arch/sh/drivers/pci/ops-sdk7780.c @@ -52,7 +52,6 @@ struct pci_channel board_pci_channels[] = { { sh7780_pci_init, &sh4_pci_ops, &sdk7780_io_resource, &sdk7780_mem_resource, 0, 0xff }, { NULL, NULL, NULL, 0, 0 }, }; -EXPORT_SYMBOL(board_pci_channels); static struct sh4_pci_address_map sdk7780_pci_map = { .window0 = { diff --git a/arch/sh/drivers/pci/ops-se7780.c b/arch/sh/drivers/pci/ops-se7780.c index 76a74fb..4730207 100644 --- a/arch/sh/drivers/pci/ops-se7780.c +++ b/arch/sh/drivers/pci/ops-se7780.c @@ -61,7 +61,6 @@ struct pci_channel board_pci_channels[] = { { sh7780_pci_init, &sh4_pci_ops, &se7780_io_resource, &se7780_mem_resource, 0, 0xff }, { NULL, NULL, NULL, 0, 0 }, }; -EXPORT_SYMBOL(board_pci_channels); static struct sh4_pci_address_map se7780_pci_map = { .window0 = { diff --git a/arch/sh/drivers/pci/ops-titan.c b/arch/sh/drivers/pci/ops-titan.c index ffa79bd..31ed037 100644 --- a/arch/sh/drivers/pci/ops-titan.c +++ b/arch/sh/drivers/pci/ops-titan.c @@ -55,7 +55,6 @@ struct pci_channel board_pci_channels[] = { { sh7751_pci_init, &sh4_pci_ops, &sh7751_io_resource, &sh7751_mem_resource, 0, 0xff }, { NULL, NULL, NULL, 0, 0 }, }; -EXPORT_SYMBOL(board_pci_channels); static struct sh4_pci_address_map sh7751_pci_map = { .window0 = { diff --git a/arch/sh/drivers/pci/pci.c b/arch/sh/drivers/pci/pci.c index b9aca54..8aaacc9 100644 --- a/arch/sh/drivers/pci/pci.c +++ b/arch/sh/drivers/pci/pci.c @@ -187,3 +187,5 @@ void pci_iounmap(struct pci_dev *dev, void __iomem *addr) iounmap(addr); } EXPORT_SYMBOL(pci_iounmap); + +EXPORT_SYMBOL(board_pci_channels); -- cgit v0.10.2 From 10591578c84825a320734e59272f161385edcc41 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Wed, 11 Mar 2009 15:58:04 +0900 Subject: sh: drop duplicate symbol export on dreamcast and sh7785lcr. With board_pci_channels now being exported in a single place, update the boards that duplicated the export. Signed-off-by: Paul Mundt diff --git a/arch/sh/drivers/pci/ops-dreamcast.c b/arch/sh/drivers/pci/ops-dreamcast.c index f62063e..5bc81d5 100644 --- a/arch/sh/drivers/pci/ops-dreamcast.c +++ b/arch/sh/drivers/pci/ops-dreamcast.c @@ -165,4 +165,3 @@ struct pci_channel board_pci_channels[] = { &gapspci_mem_resource, 0, 1 }, { 0, } }; -EXPORT_SYMBOL(board_pci_channels); diff --git a/arch/sh/drivers/pci/ops-sh7785lcr.c b/arch/sh/drivers/pci/ops-sh7785lcr.c index fb0869f..2a9f9a5 100644 --- a/arch/sh/drivers/pci/ops-sh7785lcr.c +++ b/arch/sh/drivers/pci/ops-sh7785lcr.c @@ -44,7 +44,6 @@ struct pci_channel board_pci_channels[] = { { &sh4_pci_ops, &sh7785_io_resource, &sh7785_mem_resource, 0, 0xff }, { NULL, NULL, NULL, 0, 0 }, }; -EXPORT_SYMBOL(board_pci_channels); static struct sh4_pci_address_map sh7785_pci_map = { .window0 = { -- cgit v0.10.2 From 3aabce8d3d2f9af2c08c2f590ac9acb272ca8c95 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Wed, 11 Mar 2009 16:12:39 +0900 Subject: sh: sh7785lcr: Update for recent PCI changes. Signed-off-by: Paul Mundt diff --git a/arch/sh/drivers/pci/fixups-sh7785lcr.c b/arch/sh/drivers/pci/fixups-sh7785lcr.c index 4949e60..9e7dc79 100644 --- a/arch/sh/drivers/pci/fixups-sh7785lcr.c +++ b/arch/sh/drivers/pci/fixups-sh7785lcr.c @@ -15,32 +15,33 @@ #include #include "pci-sh4.h" -int pci_fixup_pcic(void) +int pci_fixup_pcic(struct pci_channel *chan) { - pci_write_reg(0x000043ff, SH4_PCIINTM); - pci_write_reg(0x0000380f, SH4_PCIAINTM); + pci_write_reg(chan, 0x000043ff, SH4_PCIINTM); + pci_write_reg(chan, 0x0000380f, SH4_PCIAINTM); - pci_write_reg(0xfbb00047, SH7780_PCICMD); - pci_write_reg(0x00000000, SH7780_PCIIBAR); + pci_write_reg(chan, 0xfbb00047, SH7780_PCICMD); + pci_write_reg(chan, 0x00000000, SH7780_PCIIBAR); - pci_write_reg(0x00011912, SH7780_PCISVID); - pci_write_reg(0x08000000, SH7780_PCICSCR0); - pci_write_reg(0x0000001b, SH7780_PCICSAR0); - pci_write_reg(0xfd000000, SH7780_PCICSCR1); - pci_write_reg(0x0000000f, SH7780_PCICSAR1); + pci_write_reg(chan, 0x00011912, SH7780_PCISVID); + pci_write_reg(chan, 0x08000000, SH7780_PCICSCR0); + pci_write_reg(chan, 0x0000001b, SH7780_PCICSAR0); + pci_write_reg(chan, 0xfd000000, SH7780_PCICSCR1); + pci_write_reg(chan, 0x0000000f, SH7780_PCICSAR1); - pci_write_reg(0xfd000000, SH7780_PCIMBR0); - pci_write_reg(0x00fc0000, SH7780_PCIMBMR0); + pci_write_reg(chan, 0xfd000000, SH7780_PCIMBR0); + pci_write_reg(chan, 0x00fc0000, SH7780_PCIMBMR0); #ifdef CONFIG_32BIT - pci_write_reg(0xc0000000, SH7780_PCIMBR2); - pci_write_reg(0x20000000 - SH7780_PCI_IO_SIZE, SH7780_PCIMBMR2); + pci_write_reg(chan, 0xc0000000, SH7780_PCIMBR2); + pci_write_reg(chan, 0x20000000 - SH7780_PCI_IO_SIZE, SH7780_PCIMBMR2); #endif /* Set IOBR for windows containing area specified in pci.h */ - pci_write_reg((PCIBIOS_MIN_IO & ~(SH7780_PCI_IO_SIZE - 1)), + pci_write_reg(chan, chan->io_resource->start & ~(SH7780_PCI_IO_SIZE - 1), SH7780_PCIIOBR); - pci_write_reg(((SH7780_PCI_IO_SIZE - 1) & (7 << 18)), SH7780_PCIIOBMR); + pci_write_reg(chan, ((SH7780_PCI_IO_SIZE - 1) & (7 << 18)), + SH7780_PCIIOBMR); return 0; } diff --git a/arch/sh/drivers/pci/ops-sh7785lcr.c b/arch/sh/drivers/pci/ops-sh7785lcr.c index 2a9f9a5..afbb9bd 100644 --- a/arch/sh/drivers/pci/ops-sh7785lcr.c +++ b/arch/sh/drivers/pci/ops-sh7785lcr.c @@ -41,7 +41,7 @@ static struct resource sh7785_mem_resource = { }; struct pci_channel board_pci_channels[] = { - { &sh4_pci_ops, &sh7785_io_resource, &sh7785_mem_resource, 0, 0xff }, + { sh7780_pci_init, &sh4_pci_ops, &sh7785_io_resource, &sh7785_mem_resource, 0, 0xff }, { NULL, NULL, NULL, 0, 0 }, }; @@ -61,5 +61,5 @@ static struct sh4_pci_address_map sh7785_pci_map = { int __init pcibios_init_platform(void) { - return sh7780_pcic_init(&sh7785_pci_map); + return sh7780_pcic_init(&board_pci_channels[0], &sh7785_pci_map); } -- cgit v0.10.2 From f1a9ba8f15f89f3f444985251efaf809cd16da53 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Wed, 11 Mar 2009 16:17:53 +0900 Subject: sh: pci: drop duplicate PCIC fixups for SE7780 and SH7785LCR. SE7780 has the same PCIC fixup as SDK7780, and SH7785LCR the same as R7780RP. Switch to using those, and drop the duplicate code. Signed-off-by: Paul Mundt diff --git a/arch/sh/drivers/pci/Makefile b/arch/sh/drivers/pci/Makefile index 847e9089..67d710a 100644 --- a/arch/sh/drivers/pci/Makefile +++ b/arch/sh/drivers/pci/Makefile @@ -21,6 +21,6 @@ obj-$(CONFIG_SH_SDK7780) += ops-sdk7780.o fixups-sdk7780.o obj-$(CONFIG_SH_TITAN) += ops-titan.o obj-$(CONFIG_SH_LANDISK) += ops-landisk.o obj-$(CONFIG_SH_LBOX_RE2) += ops-lboxre2.o fixups-lboxre2.o -obj-$(CONFIG_SH_7780_SOLUTION_ENGINE) += ops-se7780.o fixups-se7780.o +obj-$(CONFIG_SH_7780_SOLUTION_ENGINE) += ops-se7780.o fixups-sdk7780.o obj-$(CONFIG_SH_CAYMAN) += ops-cayman.o -obj-$(CONFIG_SH_SH7785LCR) += ops-sh7785lcr.o fixups-sh7785lcr.o +obj-$(CONFIG_SH_SH7785LCR) += ops-sh7785lcr.o fixups-r7780rp.o diff --git a/arch/sh/drivers/pci/fixups-se7780.c b/arch/sh/drivers/pci/fixups-se7780.c deleted file mode 100644 index a968af7..0000000 --- a/arch/sh/drivers/pci/fixups-se7780.c +++ /dev/null @@ -1,62 +0,0 @@ -/* - * arch/sh/drivers/pci/fixups-se7780.c - * - * HITACHI UL Solution Engine 7780 PCI fixups - * - * Copyright (C) 2003 Lineo uSolutions, Inc. - * Copyright (C) 2004 - 2006 Paul Mundt - * Copyright (C) 2006 Nobuhiro Iwamatsu - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ -#include -#include "pci-sh4.h" -#include - -int pci_fixup_pcic(struct pci_channel *chan) -{ - ctrl_outl(0x00000001, SH7780_PCI_VCR2); - - /* Enable all interrupts, so we know what to fix */ - pci_write_reg(chan, 0x0000C3FF, SH7780_PCIIMR); - pci_write_reg(chan, 0x0000380F, SH7780_PCIAINTM); - - /* Set up standard PCI config registers */ - ctrl_outw(0xFB00, PCI_REG(SH7780_PCISTATUS)); - ctrl_outw(0x0047, PCI_REG(SH7780_PCICMD)); - ctrl_outb( 0x00, PCI_REG(SH7780_PCIPIF)); - ctrl_outb( 0x00, PCI_REG(SH7780_PCISUB)); - ctrl_outb( 0x06, PCI_REG(SH7780_PCIBCC)); - ctrl_outw(0x1912, PCI_REG(SH7780_PCISVID)); - ctrl_outw(0x0001, PCI_REG(SH7780_PCISID)); - - pci_write_reg(chan, 0x08000000, SH7780_PCIMBAR0); /* PCI */ - pci_write_reg(chan, 0x08000000, SH7780_PCILAR0); /* SHwy */ - pci_write_reg(chan, 0x07F00001, SH7780_PCILSR); /* size 128M w/ MBAR */ - - pci_write_reg(chan, 0x00000000, SH7780_PCIMBAR1); - pci_write_reg(chan, 0x00000000, SH7780_PCILAR1); - pci_write_reg(chan, 0x00000000, SH7780_PCILSR1); - - pci_write_reg(chan, 0xAB000801, SH7780_PCIIBAR); - - /* - * Set the MBR so PCI address is one-to-one with window, - * meaning all calls go straight through... use ifdef to - * catch erroneous assumption. - */ - pci_write_reg(chan, 0xFD000000 , SH7780_PCIMBR0); - pci_write_reg(chan, 0x00FC0000 , SH7780_PCIMBMR0); /* 16M */ - - /* Set IOBR for window containing area specified in pci.h */ - pci_write_reg(chan, chan->io_resource->start & ~(SH7780_PCI_IO_SIZE-1), - SH7780_PCIIOBR); - pci_write_reg(chan, (SH7780_PCI_IO_SIZE-1) & (7 << 18), - SH7780_PCIIOBMR); - - pci_write_reg(chan, 0xA5000C01, SH7780_PCICR); - - return 0; -} diff --git a/arch/sh/drivers/pci/fixups-sh7785lcr.c b/arch/sh/drivers/pci/fixups-sh7785lcr.c deleted file mode 100644 index 9e7dc79..0000000 --- a/arch/sh/drivers/pci/fixups-sh7785lcr.c +++ /dev/null @@ -1,47 +0,0 @@ -/* - * arch/sh/drivers/pci/fixups-sh7785lcr.c - * - * R0P7785LC0011RL PCI fixups - * Copyright (C) 2008 Yoshihiro Shimoda - * - * Based on arch/sh/drivers/pci/fixups-r7780rp.c - * Copyright (C) 2003 Lineo uSolutions, Inc. - * Copyright (C) 2004 - 2006 Paul Mundt - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ -#include -#include "pci-sh4.h" - -int pci_fixup_pcic(struct pci_channel *chan) -{ - pci_write_reg(chan, 0x000043ff, SH4_PCIINTM); - pci_write_reg(chan, 0x0000380f, SH4_PCIAINTM); - - pci_write_reg(chan, 0xfbb00047, SH7780_PCICMD); - pci_write_reg(chan, 0x00000000, SH7780_PCIIBAR); - - pci_write_reg(chan, 0x00011912, SH7780_PCISVID); - pci_write_reg(chan, 0x08000000, SH7780_PCICSCR0); - pci_write_reg(chan, 0x0000001b, SH7780_PCICSAR0); - pci_write_reg(chan, 0xfd000000, SH7780_PCICSCR1); - pci_write_reg(chan, 0x0000000f, SH7780_PCICSAR1); - - pci_write_reg(chan, 0xfd000000, SH7780_PCIMBR0); - pci_write_reg(chan, 0x00fc0000, SH7780_PCIMBMR0); - -#ifdef CONFIG_32BIT - pci_write_reg(chan, 0xc0000000, SH7780_PCIMBR2); - pci_write_reg(chan, 0x20000000 - SH7780_PCI_IO_SIZE, SH7780_PCIMBMR2); -#endif - - /* Set IOBR for windows containing area specified in pci.h */ - pci_write_reg(chan, chan->io_resource->start & ~(SH7780_PCI_IO_SIZE - 1), - SH7780_PCIIOBR); - pci_write_reg(chan, ((SH7780_PCI_IO_SIZE - 1) & (7 << 18)), - SH7780_PCIIOBMR); - - return 0; -} -- cgit v0.10.2 From 0232ba9ce031d0fd8f331fa8b3c00e16901f54e6 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Thu, 16 Apr 2009 18:01:31 +0900 Subject: sh: pci: Kill off unused SH4_PCIC_NO_RESET code. Nothing ended up using this anymore, so just kill it off. Signed-off-by: Paul Mundt diff --git a/arch/sh/drivers/pci/ops-landisk.c b/arch/sh/drivers/pci/ops-landisk.c index c46911d9..178b778 100644 --- a/arch/sh/drivers/pci/ops-landisk.c +++ b/arch/sh/drivers/pci/ops-landisk.c @@ -39,8 +39,6 @@ static struct sh4_pci_address_map sh7751_pci_map = { .base = SH7751_CS3_BASE_ADDR, .size = (64 << 20), /* 64MB */ }, - - .flags = SH4_PCIC_NO_RESET, }; int __init pcibios_init_platform(void) diff --git a/arch/sh/drivers/pci/ops-lboxre2.c b/arch/sh/drivers/pci/ops-lboxre2.c index 781496b..91cabd8 100644 --- a/arch/sh/drivers/pci/ops-lboxre2.c +++ b/arch/sh/drivers/pci/ops-lboxre2.c @@ -48,11 +48,6 @@ static struct sh4_pci_address_map sh7751_pci_map = { .base = SH7751_CS3_BASE_ADDR, .size = 0x04000000, }, - .window1 = { - .base = 0x00000000, /* Unused */ - .size = 0x00000000, /* Unused */ - }, - .flags = SH4_PCIC_NO_RESET, }; int __init pcibios_init_platform(void) diff --git a/arch/sh/drivers/pci/ops-r7780rp.c b/arch/sh/drivers/pci/ops-r7780rp.c index c58f1cf..8ec6d22 100644 --- a/arch/sh/drivers/pci/ops-r7780rp.c +++ b/arch/sh/drivers/pci/ops-r7780rp.c @@ -57,8 +57,6 @@ static struct sh4_pci_address_map sh7780_pci_map = { .base = SH7780_CS3_BASE_ADDR, .size = 0x04000000, }, - - .flags = SH4_PCIC_NO_RESET, }; int __init pcibios_init_platform(void) diff --git a/arch/sh/drivers/pci/ops-rts7751r2d.c b/arch/sh/drivers/pci/ops-rts7751r2d.c index d374cd3..96b916c 100644 --- a/arch/sh/drivers/pci/ops-rts7751r2d.c +++ b/arch/sh/drivers/pci/ops-rts7751r2d.c @@ -56,13 +56,6 @@ static struct sh4_pci_address_map sh7751_pci_map = { .base = SH7751_CS3_BASE_ADDR, .size = 0x04000000, }, - - .window1 = { - .base = 0x00000000, /* Unused */ - .size = 0x00000000, /* Unused */ - }, - - .flags = SH4_PCIC_NO_RESET, }; int __init pcibios_init_platform(void) diff --git a/arch/sh/drivers/pci/ops-sdk7780.c b/arch/sh/drivers/pci/ops-sdk7780.c index b34fbc5..6a0b7c0 100644 --- a/arch/sh/drivers/pci/ops-sdk7780.c +++ b/arch/sh/drivers/pci/ops-sdk7780.c @@ -62,7 +62,6 @@ static struct sh4_pci_address_map sdk7780_pci_map = { .base = SH7780_CS3_BASE_ADDR, .size = 0x04000000, }, - .flags = SH4_PCIC_NO_RESET, }; int __init pcibios_init_platform(void) diff --git a/arch/sh/drivers/pci/ops-se7780.c b/arch/sh/drivers/pci/ops-se7780.c index 4730207..583b8e8 100644 --- a/arch/sh/drivers/pci/ops-se7780.c +++ b/arch/sh/drivers/pci/ops-se7780.c @@ -67,7 +67,6 @@ static struct sh4_pci_address_map se7780_pci_map = { .base = SH7780_CS2_BASE_ADDR, .size = 0x04000000, }, - .flags = SH4_PCIC_NO_RESET, }; int __init pcibios_init_platform(void) diff --git a/arch/sh/drivers/pci/ops-sh7785lcr.c b/arch/sh/drivers/pci/ops-sh7785lcr.c index afbb9bd..ab0d1de 100644 --- a/arch/sh/drivers/pci/ops-sh7785lcr.c +++ b/arch/sh/drivers/pci/ops-sh7785lcr.c @@ -55,8 +55,6 @@ static struct sh4_pci_address_map sh7785_pci_map = { .size = 0x20000000, #endif }, - - .flags = SH4_PCIC_NO_RESET, }; int __init pcibios_init_platform(void) diff --git a/arch/sh/drivers/pci/ops-snapgear.c b/arch/sh/drivers/pci/ops-snapgear.c index 2e254c6..dd2c5df 100644 --- a/arch/sh/drivers/pci/ops-snapgear.c +++ b/arch/sh/drivers/pci/ops-snapgear.c @@ -54,8 +54,6 @@ static struct sh4_pci_address_map sh7751_pci_map = { .base = SH7751_CS2_BASE_ADDR, .size = SNAPGEAR_LSR1_SIZE, }, - - .flags = SH4_PCIC_NO_RESET, }; /* diff --git a/arch/sh/drivers/pci/ops-titan.c b/arch/sh/drivers/pci/ops-titan.c index 31ed037..e45bb62 100644 --- a/arch/sh/drivers/pci/ops-titan.c +++ b/arch/sh/drivers/pci/ops-titan.c @@ -66,8 +66,6 @@ static struct sh4_pci_address_map sh7751_pci_map = { .base = SH7751_CS2_BASE_ADDR, .size = SH7751_MEM_REGION_SIZE*2, }, - - .flags = SH4_PCIC_NO_RESET, }; int __init pcibios_init_platform(void) diff --git a/arch/sh/drivers/pci/pci-sh4.h b/arch/sh/drivers/pci/pci-sh4.h index 90abfe3..3d5296c 100644 --- a/arch/sh/drivers/pci/pci-sh4.h +++ b/arch/sh/drivers/pci/pci-sh4.h @@ -149,9 +149,6 @@ #define SH4_PCIPDTR_PB0 0x000000001 /* Port 0 Enable */ #define SH4_PCIPDR 0x220 /* Port IO Data Register */ -/* Flags */ -#define SH4_PCIC_NO_RESET 0x0001 - /* arch/sh/kernel/drivers/pci/ops-sh4.c */ extern struct pci_ops sh4_pci_ops; int sh4_pci_check_direct(struct pci_channel *chan); @@ -165,7 +162,6 @@ struct sh4_pci_address_space { struct sh4_pci_address_map { struct sh4_pci_address_space window0; struct sh4_pci_address_space window1; - unsigned long flags; }; static inline void pci_write_reg(struct pci_channel *chan, diff --git a/arch/sh/drivers/pci/pci-sh7751.c b/arch/sh/drivers/pci/pci-sh7751.c index 2a6c7aa..af887443 100644 --- a/arch/sh/drivers/pci/pci-sh7751.c +++ b/arch/sh/drivers/pci/pci-sh7751.c @@ -99,21 +99,6 @@ int __init sh7751_pcic_init(struct pci_channel *chan, word = SH4_PCIPINT_D3 | SH4_PCIPINT_D0; pci_write_reg(chan, word, SH4_PCIPINT); - /* - * This code is unused for some boards as it is done in the - * bootloader and doing it here means the MAC addresses loaded - * by the bootloader get lost. - */ - if (!(map->flags & SH4_PCIC_NO_RESET)) { - /* toggle PCI reset pin */ - word = SH4_PCICR_PREFIX | SH4_PCICR_PRST; - pci_write_reg(chan, word, SH4_PCICR); - /* Wait for a long time... not 1 sec. but long enough */ - mdelay(100); - word = SH4_PCICR_PREFIX; - pci_write_reg(chan, word, SH4_PCICR); - } - /* set the command/status bits to: * Wait Cycle Control + Parity Enable + Bus Master + * Mem space enable diff --git a/arch/sh/drivers/pci/pci-sh7780.c b/arch/sh/drivers/pci/pci-sh7780.c index 87a7f3b..282cabe 100644 --- a/arch/sh/drivers/pci/pci-sh7780.c +++ b/arch/sh/drivers/pci/pci-sh7780.c @@ -96,21 +96,6 @@ int __init sh7780_pcic_init(struct pci_channel *chan, { u32 word; - /* - * This code is unused for some boards as it is done in the - * bootloader and doing it here means the MAC addresses loaded - * by the bootloader get lost. - */ - if (!(map->flags & SH4_PCIC_NO_RESET)) { - /* toggle PCI reset pin */ - word = SH4_PCICR_PREFIX | SH4_PCICR_PRST; - pci_write_reg(chan, word, SH4_PCICR); - /* Wait for a long time... not 1 sec. but long enough */ - mdelay(100); - word = SH4_PCICR_PREFIX; - pci_write_reg(chan, word, SH4_PCICR); - } - /* set the command/status bits to: * Wait Cycle Control + Parity Enable + Bus Master + * Mem space enable -- cgit v0.10.2 From 84971bb401866d79c6b353cb1d8861c2b4621867 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Fri, 17 Apr 2009 12:44:25 +0900 Subject: sh: pci: Kill off useless debugging printk() in pci-sh7780 init. Signed-off-by: Paul Mundt diff --git a/arch/sh/drivers/pci/pci-sh7780.c b/arch/sh/drivers/pci/pci-sh7780.c index 282cabe..b826c7b 100644 --- a/arch/sh/drivers/pci/pci-sh7780.c +++ b/arch/sh/drivers/pci/pci-sh7780.c @@ -118,18 +118,6 @@ int __init sh7780_pcic_init(struct pci_channel *chan, pci_write_reg(chan, map->window1.base, SH4_PCILAR1); pci_write_reg(chan, map->window1.base, SH7780_PCIMBAR1); - /* Map IO space into PCI IO window: - * IO addresses will be translated to the PCI IO window base address - */ - pr_debug("PCI: Mapping IO address 0x%x - 0x%x to base 0x%lx\n", - chan->io_resource->start, chan->io_resource->end, - chan->io_base + chan->io_resource->start); - - /* NOTE: I'm ignoring the PCI error IRQs for now.. - * TODO: add support for the internal error interrupts and - * DMA interrupts... - */ - /* Apply any last-minute PCIC fixups */ pci_fixup_pcic(chan); -- cgit v0.10.2 From b627b4ed3d056c5d00e8f3cb32d033b0ee6619a9 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Fri, 17 Apr 2009 13:00:18 +0900 Subject: sh: pci: Move se7780 INTC fixups out of pci-sh7780.c. These fixups belong in the board INTC setup code, not in the middle of pci-sh7780.c. Signed-off-by: Paul Mundt diff --git a/arch/sh/boards/mach-se/7780/irq.c b/arch/sh/boards/mach-se/7780/irq.c index 66ad292..44b61a5 100644 --- a/arch/sh/boards/mach-se/7780/irq.c +++ b/arch/sh/boards/mach-se/7780/irq.c @@ -12,10 +12,13 @@ #include #include #include -#include -#include +#include +#include #include +#define INTC_BASE 0xffd00000 +#define INTC_ICR1 (INTC_BASE+0x1c) + /* * Initialize IRQ setting */ @@ -43,4 +46,7 @@ void __init init_se7780_IRQ(void) ctrl_outw((IRQPIN_PCCPW << IRQPOS_PCCPW), FPGA_INTSEL3); plat_irq_setup_pins(IRQ_MODE_IRQ); /* install handlers for IRQ0-7 */ + + /* ICR1: detect low level(for 2ndcut) */ + ctrl_outl(0xAAAA0000, INTC_ICR1); } diff --git a/arch/sh/drivers/pci/pci-sh7780.c b/arch/sh/drivers/pci/pci-sh7780.c index b826c7b..45fa423 100644 --- a/arch/sh/drivers/pci/pci-sh7780.c +++ b/arch/sh/drivers/pci/pci-sh7780.c @@ -22,20 +22,6 @@ #include #include "pci-sh4.h" -#define INTC_BASE 0xffd00000 -#define INTC_ICR0 (INTC_BASE+0x0) -#define INTC_ICR1 (INTC_BASE+0x1c) -#define INTC_INTPRI (INTC_BASE+0x10) -#define INTC_INTREQ (INTC_BASE+0x24) -#define INTC_INTMSK0 (INTC_BASE+0x44) -#define INTC_INTMSK1 (INTC_BASE+0x48) -#define INTC_INTMSK2 (INTC_BASE+0x40080) -#define INTC_INTMSKCLR0 (INTC_BASE+0x64) -#define INTC_INTMSKCLR1 (INTC_BASE+0x68) -#define INTC_INTMSKCLR2 (INTC_BASE+0x40084) -#define INTC_INT2MSKR (INTC_BASE+0x40038) -#define INTC_INT2MSKCR (INTC_BASE+0x4003c) - /* * Initialization. Try all known PCI access methods. Note that we support * using both PCI BIOS and direct access: in such cases, we use I/O ports @@ -75,16 +61,6 @@ int __init sh7780_pci_init(struct pci_channel *chan) return -ENODEV; } - /* Setup the INTC */ - if (mach_is_7780se()) { - /* ICR0: IRL=use separately */ - ctrl_outl(0x00C00020, INTC_ICR0); - /* ICR1: detect low level(for 2ndcut) */ - ctrl_outl(0xAAAA0000, INTC_ICR1); - /* INTPRI: priority=3(all) */ - ctrl_outl(0x33333333, INTC_INTPRI); - } - if ((ret = sh4_pci_check_direct(chan)) != 0) return ret; -- cgit v0.10.2 From 7e4ba0d77c96d328ba968ddff4a464d4d2fa7abc Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Fri, 17 Apr 2009 14:07:57 +0900 Subject: sh: pci: Prefer P1SEG over P1SEGADDR for CONFIG_CMD. P1SEGADDR is obsolete and will be killed off completely in the future, so transition off of it and reference P1SEG explicitly. Signed-off-by: Paul Mundt diff --git a/arch/sh/drivers/pci/ops-sh4.c b/arch/sh/drivers/pci/ops-sh4.c index 540683d..2a7f7b5 100644 --- a/arch/sh/drivers/pci/ops-sh4.c +++ b/arch/sh/drivers/pci/ops-sh4.c @@ -1,22 +1,22 @@ /* * Generic SH-4 / SH-4A PCIC operations (SH7751, SH7780). * - * Copyright (C) 2002 - 2006 Paul Mundt + * Copyright (C) 2002 - 2009 Paul Mundt * * This file is subject to the terms and conditions of the GNU General Public * License v2. See the file "COPYING" in the main directory of this archive * for more details. */ #include +#include #include -#include #include "pci-sh4.h" /* * Direct access to PCI hardware... */ #define CONFIG_CMD(bus, devfn, where) \ - P1SEGADDR((bus->number << 16) | (devfn << 8) | (where & ~3)) + (P1SEG | (bus->number << 16) | (devfn << 8) | (where & ~3)) static DEFINE_SPINLOCK(sh4_pci_lock); -- cgit v0.10.2 From 0bbc9bc3189f24de946777af43c9033c8c4871e4 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Fri, 17 Apr 2009 14:09:09 +0900 Subject: sh: pci: Set class/sub-class code correctly for SH7780 PCIC. The SH7780 PCI host controller implements a configuration header that requires a fair bit of hand-holding to initialize properly. By default it appears as a pre-2.0 host controller given the zeroed out class code, so fix this up properly. Some boards that happened to be using the R7780RP version of the PCIC fixups had set this correctly, but this belongs in the standard initialization, and is by no means board specific. Signed-off-by: Paul Mundt diff --git a/arch/sh/drivers/pci/fixups-sdk7780.c b/arch/sh/drivers/pci/fixups-sdk7780.c index c295731..004efd4 100644 --- a/arch/sh/drivers/pci/fixups-sdk7780.c +++ b/arch/sh/drivers/pci/fixups-sdk7780.c @@ -16,8 +16,6 @@ int pci_fixup_pcic(struct pci_channel *chan) { - ctrl_outl(0x00000001, SH7780_PCI_VCR2); - /* Enable all interrupts, so we know what to fix */ pci_write_reg(chan, 0x0000C3FF, SH7780_PCIIMR); pci_write_reg(chan, 0x0000380F, SH7780_PCIAINTM); @@ -26,8 +24,6 @@ int pci_fixup_pcic(struct pci_channel *chan) pci_write_reg(chan, 0xFB00, SH7780_PCISTATUS); pci_write_reg(chan, 0x0047, SH7780_PCICMD); pci_write_reg(chan, 0x00, SH7780_PCIPIF); - pci_write_reg(chan, 0x00, SH7780_PCISUB); - pci_write_reg(chan, 0x06, SH7780_PCIBCC); pci_write_reg(chan, 0x1912, SH7780_PCISVID); pci_write_reg(chan, 0x0001, SH7780_PCISID); diff --git a/arch/sh/drivers/pci/pci-sh7780.c b/arch/sh/drivers/pci/pci-sh7780.c index 45fa423..7f4f590 100644 --- a/arch/sh/drivers/pci/pci-sh7780.c +++ b/arch/sh/drivers/pci/pci-sh7780.c @@ -72,16 +72,15 @@ int __init sh7780_pcic_init(struct pci_channel *chan, { u32 word; + pci_write_reg(chan, PCI_CLASS_BRIDGE_HOST >> 8, SH7780_PCIBCC); + pci_write_reg(chan, PCI_CLASS_BRIDGE_HOST & 0xff, SH7780_PCISUB); + /* set the command/status bits to: * Wait Cycle Control + Parity Enable + Bus Master + * Mem space enable */ pci_write_reg(chan, 0x00000046, SH7780_PCICMD); - /* define this host as the host bridge */ - word = PCI_BASE_CLASS_BRIDGE << 24; - pci_write_reg(chan, word, SH7780_PCIRID); - /* Set IO and Mem windows to local address * Make PCI and local address the same for easy 1 to 1 mapping */ -- cgit v0.10.2 From 4e7b7fdb129995640f144b7de114e109c6b46a2a Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Fri, 17 Apr 2009 15:05:19 +0900 Subject: sh: pci: Rework SH7780 host controller detection. This reworks how the host controller is probed, and makes it a bit more verbose in the event a new type of controller is detected. Additionally, we also log the revision information. This now uses the proper access sizes for the vendor/device registers, rather than relying on a larger access that encapsulated both of them. Not all devices support 32-bit read cycles for these registers. Signed-off-by: Paul Mundt diff --git a/arch/sh/drivers/pci/pci-sh7780.c b/arch/sh/drivers/pci/pci-sh7780.c index 7f4f590..63b5151 100644 --- a/arch/sh/drivers/pci/pci-sh7780.c +++ b/arch/sh/drivers/pci/pci-sh7780.c @@ -34,33 +34,39 @@ int __init sh7780_pci_init(struct pci_channel *chan) { unsigned int id; - int ret, match = 0; + const char *type = NULL; + int ret; - pr_debug("PCI: Starting intialization.\n"); + printk(KERN_NOTICE "PCI: Starting intialization.\n"); chan->reg_base = 0xfe040000; chan->io_base = 0xfe200000; - ctrl_outl(0x00000001, SH7780_PCI_VCR2); /* Enable PCIC */ - - /* check for SH7780/SH7780R hardware */ - id = pci_read_reg(chan, SH7780_PCIVID); - if ((id & 0xffff) == SH7780_VENDOR_ID) { - switch ((id >> 16) & 0xffff) { - case SH7763_DEVICE_ID: - case SH7780_DEVICE_ID: - case SH7781_DEVICE_ID: - case SH7785_DEVICE_ID: - match = 1; - break; - } - } + /* Enable CPU access to the PCIC registers. */ + __raw_writel(PCIECR_ENBL, PCIECR); - if (unlikely(!match)) { - printk(KERN_ERR "PCI: This is not an SH7780 (%x)\n", id); + id = __raw_readw(chan->reg_base + SH7780_PCIVID); + if (id != SH7780_VENDOR_ID) { + printk(KERN_ERR "PCI: Unknown vendor ID 0x%04x.\n", id); return -ENODEV; } + id = __raw_readw(chan->reg_base + SH7780_PCIDID); + type = (id == SH7763_DEVICE_ID) ? "SH7763" : + (id == SH7780_DEVICE_ID) ? "SH7780" : + (id == SH7781_DEVICE_ID) ? "SH7781" : + (id == SH7785_DEVICE_ID) ? "SH7785" : + NULL; + if (unlikely(!type)) { + printk(KERN_ERR "PCI: Found an unsupported Renesas host " + "controller, device id 0x%04x.\n", id); + return -EINVAL; + } + + printk(KERN_NOTICE "PCI: Found a Renesas %s host " + "controller, revision %d.\n", type, + __raw_readb(chan->reg_base + SH7780_PCIRID)); + if ((ret = sh4_pci_check_direct(chan)) != 0) return ret; diff --git a/arch/sh/drivers/pci/pci-sh7780.h b/arch/sh/drivers/pci/pci-sh7780.h index fffcf1d..213f1d8 100644 --- a/arch/sh/drivers/pci/pci-sh7780.h +++ b/arch/sh/drivers/pci/pci-sh7780.h @@ -20,9 +20,8 @@ #define SH7785_DEVICE_ID 0x0007 /* SH7780 Control Registers */ -#define SH7780_PCI_VCR0 0xFE000000 -#define SH7780_PCI_VCR1 0xFE000004 -#define SH7780_PCI_VCR2 0xFE000008 +#define PCIECR 0xFE000008 +#define PCIECR_ENBL 0x01 /* SH7780 Specific Values */ #define SH7780_PCI_CONFIG_BASE 0xFD000000 /* Config space base addr */ -- cgit v0.10.2 From ab78cbcf6877334fc20868b7df7887349e2e01c8 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Fri, 17 Apr 2009 15:08:01 +0900 Subject: sh: pci: Use the proper write size for class/sub-class code. Don't use pci_write_reg() for these, as it defaults to 32-bit. Rather than using the helper, use __raw_writeb() directly. Signed-off-by: Paul Mundt diff --git a/arch/sh/drivers/pci/pci-sh7780.c b/arch/sh/drivers/pci/pci-sh7780.c index 63b5151..19bac21 100644 --- a/arch/sh/drivers/pci/pci-sh7780.c +++ b/arch/sh/drivers/pci/pci-sh7780.c @@ -78,8 +78,10 @@ int __init sh7780_pcic_init(struct pci_channel *chan, { u32 word; - pci_write_reg(chan, PCI_CLASS_BRIDGE_HOST >> 8, SH7780_PCIBCC); - pci_write_reg(chan, PCI_CLASS_BRIDGE_HOST & 0xff, SH7780_PCISUB); + __raw_writeb(PCI_CLASS_BRIDGE_HOST >> 8, + chan->reg_base + SH7780_PCIBCC); + __raw_writeb(PCI_CLASS_BRIDGE_HOST & 0xff, + chan->reg_base + SH7780_PCISUB); /* set the command/status bits to: * Wait Cycle Control + Parity Enable + Bus Master + -- cgit v0.10.2 From c66c1d79a94a7a302e2dc6c93da40902423eac3e Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Fri, 17 Apr 2009 16:38:00 +0900 Subject: sh: pci: Set pci_cache_line_size on SH7780 via the PCICLS register. The SH7780 PCIC contains a read-only cache line size register that we can derive pci_cache_line_size from. So, make sure that the software idea of the cache line size actually matches the host controller's idea. Signed-off-by: Paul Mundt diff --git a/arch/sh/drivers/pci/pci-sh7780.c b/arch/sh/drivers/pci/pci-sh7780.c index 19bac21..fa73b0d 100644 --- a/arch/sh/drivers/pci/pci-sh7780.c +++ b/arch/sh/drivers/pci/pci-sh7780.c @@ -22,15 +22,6 @@ #include #include "pci-sh4.h" -/* - * Initialization. Try all known PCI access methods. Note that we support - * using both PCI BIOS and direct access: in such cases, we use I/O ports - * to access config space. - * - * Note that the platform specific initialization (BSC registers, and memory - * space mapping) will be called via the platform defined function - * pcibios_init_platform(). - */ int __init sh7780_pci_init(struct pci_channel *chan) { unsigned int id; @@ -70,19 +61,31 @@ int __init sh7780_pci_init(struct pci_channel *chan) if ((ret = sh4_pci_check_direct(chan)) != 0) return ret; + /* + * Platform specific initialization (BSC registers, and memory space + * mapping) will be called via the platform defined function + * pcibios_init_platform(). + */ return pcibios_init_platform(); } +extern u8 pci_cache_line_size; + int __init sh7780_pcic_init(struct pci_channel *chan, struct sh4_pci_address_map *map) { u32 word; + /* + * Set the class and sub-class codes. + */ __raw_writeb(PCI_CLASS_BRIDGE_HOST >> 8, chan->reg_base + SH7780_PCIBCC); __raw_writeb(PCI_CLASS_BRIDGE_HOST & 0xff, chan->reg_base + SH7780_PCISUB); + pci_cache_line_size = pci_read_reg(chan, SH7780_PCICLS) / 4; + /* set the command/status bits to: * Wait Cycle Control + Parity Enable + Bus Master + * Mem space enable -- cgit v0.10.2 From f1dcab756687622b658154ded1657538984edcdb Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Fri, 17 Apr 2009 17:00:27 +0900 Subject: sh: pci: Set the I/O port base to the SH7780 I/O window default. Presently the I/O port base isn't being set anywhere, which allows things like generic_inl() to blow up. Fix this up to point at the PCI IO window. Signed-off-by: Paul Mundt diff --git a/arch/sh/drivers/pci/pci-sh7780.c b/arch/sh/drivers/pci/pci-sh7780.c index fa73b0d..207b720 100644 --- a/arch/sh/drivers/pci/pci-sh7780.c +++ b/arch/sh/drivers/pci/pci-sh7780.c @@ -112,5 +112,7 @@ int __init sh7780_pcic_init(struct pci_channel *chan, word = SH4_PCICR_PREFIX | SH4_PCICR_CFIN | SH4_PCICR_FTO; pci_write_reg(chan, word, SH4_PCICR); + __set_io_port_base(SH7780_PCI_IO_BASE); + return 0; } -- cgit v0.10.2 From ab1363a8929f32cc163cd3f50ca72f20d901b00c Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Fri, 17 Apr 2009 17:07:47 +0900 Subject: sh: pci: Consolidate PCI I/O and mem window definitions for SH7780. This consolidates all of the PCI I/O and memory window definitions across the pci-sh7780 users in pci-sh7780 itself. No functional changes, in that every platform had exactly the same implementation. Signed-off-by: Paul Mundt diff --git a/arch/sh/drivers/pci/ops-r7780rp.c b/arch/sh/drivers/pci/ops-r7780rp.c index 8ec6d22..044525df 100644 --- a/arch/sh/drivers/pci/ops-r7780rp.c +++ b/arch/sh/drivers/pci/ops-r7780rp.c @@ -26,27 +26,6 @@ int __init pcibios_map_platform_irq(struct pci_dev *pdev, u8 slot, u8 pin) return irq_tab[slot]; } -static struct resource sh7780_io_resource = { - .name = "SH7780_IO", - .start = SH7780_PCI_IO_BASE, - .end = SH7780_PCI_IO_BASE + SH7780_PCI_IO_SIZE - 1, - .flags = IORESOURCE_IO -}; - -static struct resource sh7780_mem_resource = { - .name = "SH7780_mem", - .start = SH7780_PCI_MEMORY_BASE, - .end = SH7780_PCI_MEMORY_BASE + SH7780_PCI_MEM_SIZE - 1, - .flags = IORESOURCE_MEM -}; - -extern struct pci_ops sh7780_pci_ops; - -struct pci_channel board_pci_channels[] = { - { sh7780_pci_init, &sh4_pci_ops, &sh7780_io_resource, &sh7780_mem_resource, 0, 0xff }, - { NULL, NULL, NULL, 0, 0 }, -}; - static struct sh4_pci_address_map sh7780_pci_map = { .window0 = { .base = SH7780_CS2_BASE_ADDR, @@ -61,5 +40,5 @@ static struct sh4_pci_address_map sh7780_pci_map = { int __init pcibios_init_platform(void) { - return sh7780_pcic_init(&board_pci_channels[0], &sh7780_pci_map); + return sh7780_pcic_init(&sh7780_pci_map); } diff --git a/arch/sh/drivers/pci/ops-sdk7780.c b/arch/sh/drivers/pci/ops-sdk7780.c index 6a0b7c0..570fd71 100644 --- a/arch/sh/drivers/pci/ops-sdk7780.c +++ b/arch/sh/drivers/pci/ops-sdk7780.c @@ -34,25 +34,6 @@ int __init pcibios_map_platform_irq(struct pci_dev *pdev, u8 slot, u8 pin) return sdk7780_irq_tab[pin-1][slot]; } -static struct resource sdk7780_io_resource = { - .name = "SH7780_IO", - .start = SH7780_PCI_IO_BASE, - .end = SH7780_PCI_IO_BASE + SH7780_PCI_IO_SIZE - 1, - .flags = IORESOURCE_IO -}; - -static struct resource sdk7780_mem_resource = { - .name = "SH7780_mem", - .start = SH7780_PCI_MEMORY_BASE, - .end = SH7780_PCI_MEMORY_BASE + SH7780_PCI_MEM_SIZE - 1, - .flags = IORESOURCE_MEM -}; - -struct pci_channel board_pci_channels[] = { - { sh7780_pci_init, &sh4_pci_ops, &sdk7780_io_resource, &sdk7780_mem_resource, 0, 0xff }, - { NULL, NULL, NULL, 0, 0 }, -}; - static struct sh4_pci_address_map sdk7780_pci_map = { .window0 = { .base = SH7780_CS2_BASE_ADDR, @@ -67,5 +48,5 @@ static struct sh4_pci_address_map sdk7780_pci_map = { int __init pcibios_init_platform(void) { printk(KERN_INFO "SH7780 PCI: Finished initializing PCI controller\n"); - return sh7780_pcic_init(&board_pci_channels[0], &sdk7780_pci_map); + return sh7780_pcic_init(&sdk7780_pci_map); } diff --git a/arch/sh/drivers/pci/ops-se7780.c b/arch/sh/drivers/pci/ops-se7780.c index 583b8e8..8b09415 100644 --- a/arch/sh/drivers/pci/ops-se7780.c +++ b/arch/sh/drivers/pci/ops-se7780.c @@ -41,27 +41,6 @@ int __init pcibios_map_platform_irq(struct pci_dev *pdev, u8 slot, u8 pin) return se7780_irq_tab[pin-1][slot]; } -static struct resource se7780_io_resource = { - .name = "SH7780_IO", - .start = SH7780_PCI_IO_BASE, - .end = SH7780_PCI_IO_BASE + SH7780_PCI_IO_SIZE - 1, - .flags = IORESOURCE_IO -}; - -static struct resource se7780_mem_resource = { - .name = "SH7780_mem", - .start = SH7780_PCI_MEMORY_BASE, - .end = SH7780_PCI_MEMORY_BASE + SH7780_PCI_MEM_SIZE - 1, - .flags = IORESOURCE_MEM -}; - -extern struct pci_ops se7780_pci_ops; - -struct pci_channel board_pci_channels[] = { - { sh7780_pci_init, &sh4_pci_ops, &se7780_io_resource, &se7780_mem_resource, 0, 0xff }, - { NULL, NULL, NULL, 0, 0 }, -}; - static struct sh4_pci_address_map se7780_pci_map = { .window0 = { .base = SH7780_CS2_BASE_ADDR, @@ -90,5 +69,5 @@ int __init pcibios_init_platform(void) ctrl_outw(0x0013, FPGA_PCI_INTSEL1); ctrl_outw(0xE402, FPGA_PCI_INTSEL2); - return sh7780_pcic_init(&board_pci_channels[0], &se7780_pci_map); + return sh7780_pcic_init(&se7780_pci_map); } diff --git a/arch/sh/drivers/pci/ops-sh7785lcr.c b/arch/sh/drivers/pci/ops-sh7785lcr.c index ab0d1de..bac46b5 100644 --- a/arch/sh/drivers/pci/ops-sh7785lcr.c +++ b/arch/sh/drivers/pci/ops-sh7785lcr.c @@ -26,25 +26,6 @@ int __init pcibios_map_platform_irq(struct pci_dev *pdev, u8 slot, u8 pin) return irq_tab[slot]; } -static struct resource sh7785_io_resource = { - .name = "SH7785_IO", - .start = SH7780_PCI_IO_BASE, - .end = SH7780_PCI_IO_BASE + SH7780_PCI_IO_SIZE - 1, - .flags = IORESOURCE_IO -}; - -static struct resource sh7785_mem_resource = { - .name = "SH7785_mem", - .start = SH7780_PCI_MEMORY_BASE, - .end = SH7780_PCI_MEMORY_BASE + SH7780_PCI_MEM_SIZE - 1, - .flags = IORESOURCE_MEM -}; - -struct pci_channel board_pci_channels[] = { - { sh7780_pci_init, &sh4_pci_ops, &sh7785_io_resource, &sh7785_mem_resource, 0, 0xff }, - { NULL, NULL, NULL, 0, 0 }, -}; - static struct sh4_pci_address_map sh7785_pci_map = { .window0 = { #if defined(CONFIG_32BIT) @@ -59,5 +40,5 @@ static struct sh4_pci_address_map sh7785_pci_map = { int __init pcibios_init_platform(void) { - return sh7780_pcic_init(&board_pci_channels[0], &sh7785_pci_map); + return sh7780_pcic_init(&sh7785_pci_map); } diff --git a/arch/sh/drivers/pci/pci-sh7780.c b/arch/sh/drivers/pci/pci-sh7780.c index 207b720..eb217dd 100644 --- a/arch/sh/drivers/pci/pci-sh7780.c +++ b/arch/sh/drivers/pci/pci-sh7780.c @@ -22,7 +22,7 @@ #include #include "pci-sh4.h" -int __init sh7780_pci_init(struct pci_channel *chan) +static int __init sh7780_pci_init(struct pci_channel *chan) { unsigned int id; const char *type = NULL; @@ -71,9 +71,28 @@ int __init sh7780_pci_init(struct pci_channel *chan) extern u8 pci_cache_line_size; -int __init sh7780_pcic_init(struct pci_channel *chan, - struct sh4_pci_address_map *map) +static struct resource sh7785_io_resource = { + .name = "SH7785_IO", + .start = SH7780_PCI_IO_BASE, + .end = SH7780_PCI_IO_BASE + SH7780_PCI_IO_SIZE - 1, + .flags = IORESOURCE_IO +}; + +static struct resource sh7785_mem_resource = { + .name = "SH7785_mem", + .start = SH7780_PCI_MEMORY_BASE, + .end = SH7780_PCI_MEMORY_BASE + SH7780_PCI_MEM_SIZE - 1, + .flags = IORESOURCE_MEM +}; + +struct pci_channel board_pci_channels[] = { + { sh7780_pci_init, &sh4_pci_ops, &sh7785_io_resource, &sh7785_mem_resource, 0, 0xff }, + { NULL, NULL, NULL, 0, 0 }, +}; + +int __init sh7780_pcic_init(struct sh4_pci_address_map *map) { + struct pci_channel *chan = &board_pci_channels[0]; u32 word; /* diff --git a/arch/sh/drivers/pci/pci-sh7780.h b/arch/sh/drivers/pci/pci-sh7780.h index 213f1d8..7a4f8a8 100644 --- a/arch/sh/drivers/pci/pci-sh7780.h +++ b/arch/sh/drivers/pci/pci-sh7780.h @@ -107,8 +107,6 @@ struct sh4_pci_address_map; /* arch/sh/drivers/pci/pci-sh7780.c */ -int sh7780_pci_init(struct pci_channel *chan); -int sh7780_pcic_init(struct pci_channel *chan, - struct sh4_pci_address_map *map); +int sh7780_pcic_init(struct sh4_pci_address_map *map); #endif /* _PCI_SH7780_H_ */ -- cgit v0.10.2 From 4c7a47de897e89c25a40e228ac5319cbac7257fe Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Fri, 17 Apr 2009 17:21:36 +0900 Subject: sh: pci: Kill off platform-specific multi-window mappings. Commit 68b42d1b548be1840aff7122fdebeb804daf0fa3 ("sh: sh7785lcr: Map whole PCI address space.") changed around the semantics of how various chip-selects are made accessible to PCI. Now that there is a single large mapping covering from CS0-CS6, there is no longer any need to do multi-window mapping. Subsequently, all of the differing implementations can be consolidated in to pci-sh7780. Signed-off-by: Paul Mundt diff --git a/arch/sh/boards/mach-se/7780/irq.c b/arch/sh/boards/mach-se/7780/irq.c index 44b61a5..b8d43b6 100644 --- a/arch/sh/boards/mach-se/7780/irq.c +++ b/arch/sh/boards/mach-se/7780/irq.c @@ -49,4 +49,21 @@ void __init init_se7780_IRQ(void) /* ICR1: detect low level(for 2ndcut) */ ctrl_outl(0xAAAA0000, INTC_ICR1); + + /* + * FPGA PCISEL register initialize + * + * CPU || SLOT1 | SLOT2 | S-ATA | USB + * ------------------------------------- + * INTA || INTA | INTD | -- | INTB + * ------------------------------------- + * INTB || INTB | INTA | -- | INTC + * ------------------------------------- + * INTC || INTC | INTB | INTA | -- + * ------------------------------------- + * INTD || INTD | INTC | -- | INTA + * ------------------------------------- + */ + ctrl_outw(0x0013, FPGA_PCI_INTSEL1); + ctrl_outw(0xE402, FPGA_PCI_INTSEL2); } diff --git a/arch/sh/drivers/pci/ops-r7780rp.c b/arch/sh/drivers/pci/ops-r7780rp.c index 044525df..4ea136e 100644 --- a/arch/sh/drivers/pci/ops-r7780rp.c +++ b/arch/sh/drivers/pci/ops-r7780rp.c @@ -25,20 +25,3 @@ int __init pcibios_map_platform_irq(struct pci_dev *pdev, u8 slot, u8 pin) { return irq_tab[slot]; } - -static struct sh4_pci_address_map sh7780_pci_map = { - .window0 = { - .base = SH7780_CS2_BASE_ADDR, - .size = 0x04000000, - }, - - .window1 = { - .base = SH7780_CS3_BASE_ADDR, - .size = 0x04000000, - }, -}; - -int __init pcibios_init_platform(void) -{ - return sh7780_pcic_init(&sh7780_pci_map); -} diff --git a/arch/sh/drivers/pci/ops-sdk7780.c b/arch/sh/drivers/pci/ops-sdk7780.c index 570fd71..1d9a91b 100644 --- a/arch/sh/drivers/pci/ops-sdk7780.c +++ b/arch/sh/drivers/pci/ops-sdk7780.c @@ -33,20 +33,3 @@ int __init pcibios_map_platform_irq(struct pci_dev *pdev, u8 slot, u8 pin) { return sdk7780_irq_tab[pin-1][slot]; } - -static struct sh4_pci_address_map sdk7780_pci_map = { - .window0 = { - .base = SH7780_CS2_BASE_ADDR, - .size = 0x04000000, - }, - .window1 = { - .base = SH7780_CS3_BASE_ADDR, - .size = 0x04000000, - }, -}; - -int __init pcibios_init_platform(void) -{ - printk(KERN_INFO "SH7780 PCI: Finished initializing PCI controller\n"); - return sh7780_pcic_init(&sdk7780_pci_map); -} diff --git a/arch/sh/drivers/pci/ops-se7780.c b/arch/sh/drivers/pci/ops-se7780.c index 8b09415..6c088cc 100644 --- a/arch/sh/drivers/pci/ops-se7780.c +++ b/arch/sh/drivers/pci/ops-se7780.c @@ -40,34 +40,3 @@ int __init pcibios_map_platform_irq(struct pci_dev *pdev, u8 slot, u8 pin) { return se7780_irq_tab[pin-1][slot]; } - -static struct sh4_pci_address_map se7780_pci_map = { - .window0 = { - .base = SH7780_CS2_BASE_ADDR, - .size = 0x04000000, - }, -}; - -int __init pcibios_init_platform(void) -{ - printk("SH7780 PCI: Finished initialization of the PCI controller\n"); - - /* - * FPGA PCISEL register initialize - * - * CPU || SLOT1 | SLOT2 | S-ATA | USB - * ------------------------------------- - * INTA || INTA | INTD | -- | INTB - * ------------------------------------- - * INTB || INTB | INTA | -- | INTC - * ------------------------------------- - * INTC || INTC | INTB | INTA | -- - * ------------------------------------- - * INTD || INTD | INTC | -- | INTA - * ------------------------------------- - */ - ctrl_outw(0x0013, FPGA_PCI_INTSEL1); - ctrl_outw(0xE402, FPGA_PCI_INTSEL2); - - return sh7780_pcic_init(&se7780_pci_map); -} diff --git a/arch/sh/drivers/pci/ops-sh7785lcr.c b/arch/sh/drivers/pci/ops-sh7785lcr.c index bac46b5..0fe423e 100644 --- a/arch/sh/drivers/pci/ops-sh7785lcr.c +++ b/arch/sh/drivers/pci/ops-sh7785lcr.c @@ -25,20 +25,3 @@ int __init pcibios_map_platform_irq(struct pci_dev *pdev, u8 slot, u8 pin) { return irq_tab[slot]; } - -static struct sh4_pci_address_map sh7785_pci_map = { - .window0 = { -#if defined(CONFIG_32BIT) - .base = SH7780_32BIT_DDR_BASE_ADDR, - .size = 0x40000000, -#else - .base = SH7780_CS0_BASE_ADDR, - .size = 0x20000000, -#endif - }, -}; - -int __init pcibios_init_platform(void) -{ - return sh7780_pcic_init(&sh7785_pci_map); -} diff --git a/arch/sh/drivers/pci/pci-sh7780.c b/arch/sh/drivers/pci/pci-sh7780.c index eb217dd..07c5529 100644 --- a/arch/sh/drivers/pci/pci-sh7780.c +++ b/arch/sh/drivers/pci/pci-sh7780.c @@ -90,7 +90,19 @@ struct pci_channel board_pci_channels[] = { { NULL, NULL, NULL, 0, 0 }, }; -int __init sh7780_pcic_init(struct sh4_pci_address_map *map) +static struct sh4_pci_address_map sh7780_pci_map = { + .window0 = { +#if defined(CONFIG_32BIT) + .base = SH7780_32BIT_DDR_BASE_ADDR, + .size = 0x40000000, +#else + .base = SH7780_CS0_BASE_ADDR, + .size = 0x20000000, +#endif + }, +}; + +int __init pcibios_init_platform(void) { struct pci_channel *chan = &board_pci_channels[0]; u32 word; @@ -114,14 +126,10 @@ int __init sh7780_pcic_init(struct sh4_pci_address_map *map) /* Set IO and Mem windows to local address * Make PCI and local address the same for easy 1 to 1 mapping */ - pci_write_reg(chan, map->window0.size - 0xfffff, SH4_PCILSR0); - pci_write_reg(chan, map->window1.size - 0xfffff, SH4_PCILSR1); + pci_write_reg(chan, sh7780_pci_map.window0.size - 0xfffff, SH4_PCILSR0); /* Set the values on window 0 PCI config registers */ - pci_write_reg(chan, map->window0.base, SH4_PCILAR0); - pci_write_reg(chan, map->window0.base, SH7780_PCIMBAR0); - /* Set the values on window 1 PCI config registers */ - pci_write_reg(chan, map->window1.base, SH4_PCILAR1); - pci_write_reg(chan, map->window1.base, SH7780_PCIMBAR1); + pci_write_reg(chan, sh7780_pci_map.window0.base, SH4_PCILAR0); + pci_write_reg(chan, sh7780_pci_map.window0.base, SH7780_PCIMBAR0); /* Apply any last-minute PCIC fixups */ pci_fixup_pcic(chan); diff --git a/arch/sh/drivers/pci/pci-sh7780.h b/arch/sh/drivers/pci/pci-sh7780.h index 7a4f8a8..4b65d4b 100644 --- a/arch/sh/drivers/pci/pci-sh7780.h +++ b/arch/sh/drivers/pci/pci-sh7780.h @@ -104,9 +104,4 @@ #define SH7780_32BIT_DDR_BASE_ADDR 0x40000000 -struct sh4_pci_address_map; - -/* arch/sh/drivers/pci/pci-sh7780.c */ -int sh7780_pcic_init(struct sh4_pci_address_map *map); - #endif /* _PCI_SH7780_H_ */ -- cgit v0.10.2 From a6d377b6969235a3b5a6e87bdcef387d0976b41c Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Fri, 17 Apr 2009 20:11:44 +0900 Subject: sh: pci: Consolidate SH7780 PCIC IRQ routing. Now that the platform code is a bit leaner, we can start consolidating the various IRQ routing implementations. There are effectively only 2 variants, and the others can use those directly. Signed-off-by: Paul Mundt diff --git a/arch/sh/drivers/pci/Makefile b/arch/sh/drivers/pci/Makefile index 67d710a..5003971 100644 --- a/arch/sh/drivers/pci/Makefile +++ b/arch/sh/drivers/pci/Makefile @@ -16,11 +16,11 @@ obj-$(CONFIG_SH_DREAMCAST) += ops-dreamcast.o fixups-dreamcast.o obj-$(CONFIG_SH_SECUREEDGE5410) += ops-snapgear.o obj-$(CONFIG_SH_RTS7751R2D) += ops-rts7751r2d.o fixups-rts7751r2d.o obj-$(CONFIG_SH_SH03) += ops-sh03.o fixups-sh03.o -obj-$(CONFIG_SH_HIGHLANDER) += ops-r7780rp.o fixups-r7780rp.o -obj-$(CONFIG_SH_SDK7780) += ops-sdk7780.o fixups-sdk7780.o +obj-$(CONFIG_SH_HIGHLANDER) += fixups-r7780rp.o +obj-$(CONFIG_SH_SH7785LCR) += fixups-r7780rp.o +obj-$(CONFIG_SH_SDK7780) += fixups-sdk7780.o +obj-$(CONFIG_SH_7780_SOLUTION_ENGINE) += fixups-sdk7780.o obj-$(CONFIG_SH_TITAN) += ops-titan.o obj-$(CONFIG_SH_LANDISK) += ops-landisk.o obj-$(CONFIG_SH_LBOX_RE2) += ops-lboxre2.o fixups-lboxre2.o -obj-$(CONFIG_SH_7780_SOLUTION_ENGINE) += ops-se7780.o fixups-sdk7780.o obj-$(CONFIG_SH_CAYMAN) += ops-cayman.o -obj-$(CONFIG_SH_SH7785LCR) += ops-sh7785lcr.o fixups-r7780rp.o diff --git a/arch/sh/drivers/pci/fixups-r7780rp.c b/arch/sh/drivers/pci/fixups-r7780rp.c index 31f8dfb..864e92f 100644 --- a/arch/sh/drivers/pci/fixups-r7780rp.c +++ b/arch/sh/drivers/pci/fixups-r7780rp.c @@ -11,9 +11,17 @@ * for more details. */ #include +#include #include "pci-sh4.h" -#include +static char irq_tab[] __initdata = { + 65, 66, 67, 68, +}; + +int __init pcibios_map_platform_irq(struct pci_dev *pdev, u8 slot, u8 pin) +{ + return irq_tab[slot]; +} int pci_fixup_pcic(struct pci_channel *chan) { pci_write_reg(chan, 0x000043ff, SH4_PCIINTM); diff --git a/arch/sh/drivers/pci/fixups-sdk7780.c b/arch/sh/drivers/pci/fixups-sdk7780.c index 004efd4..da60e99 100644 --- a/arch/sh/drivers/pci/fixups-sdk7780.c +++ b/arch/sh/drivers/pci/fixups-sdk7780.c @@ -5,15 +5,32 @@ * * Copyright (C) 2003 Lineo uSolutions, Inc. * Copyright (C) 2004 - 2006 Paul Mundt + * Copyright (C) 2006 Nobuhiro Iwamatsu * * This file is subject to the terms and conditions of the GNU General Public * License. See the file "COPYING" in the main directory of this archive * for more details. */ #include +#include #include "pci-sh4.h" -#include +/* IDSEL [16][17][18][19][20][21][22][23][24][25][26][27][28][29][30][31] */ +static char sdk7780_irq_tab[4][16] __initdata = { + /* INTA */ + { 65, 68, 67, 68, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1 }, + /* INTB */ + { 66, 65, -1, 65, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1 }, + /* INTC */ + { 67, 66, -1, 66, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1 }, + /* INTD */ + { 68, 67, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1 }, +}; + +int __init pcibios_map_platform_irq(struct pci_dev *pdev, u8 slot, u8 pin) +{ + return sdk7780_irq_tab[pin-1][slot]; +} int pci_fixup_pcic(struct pci_channel *chan) { /* Enable all interrupts, so we know what to fix */ diff --git a/arch/sh/drivers/pci/ops-r7780rp.c b/arch/sh/drivers/pci/ops-r7780rp.c deleted file mode 100644 index 4ea136e..0000000 --- a/arch/sh/drivers/pci/ops-r7780rp.c +++ /dev/null @@ -1,27 +0,0 @@ -/* - * Author: Ian DaSilva (idasilva@mvista.com) - * - * Highly leveraged from pci-bigsur.c, written by Dustin McIntire. - * - * May be copied or modified under the terms of the GNU General Public - * License. See linux/COPYING for more information. - * - * PCI initialization for the Renesas SH7780 Highlander R7780RP-1 board - */ -#include -#include -#include -#include -#include -#include -#include -#include "pci-sh4.h" - -static char irq_tab[] __initdata = { - 65, 66, 67, 68, -}; - -int __init pcibios_map_platform_irq(struct pci_dev *pdev, u8 slot, u8 pin) -{ - return irq_tab[slot]; -} diff --git a/arch/sh/drivers/pci/ops-sdk7780.c b/arch/sh/drivers/pci/ops-sdk7780.c deleted file mode 100644 index 1d9a91b..0000000 --- a/arch/sh/drivers/pci/ops-sdk7780.c +++ /dev/null @@ -1,35 +0,0 @@ -/* - * linux/arch/sh/drivers/pci/ops-sdk7780.c - * - * Copyright (C) 2006 Nobuhiro Iwamatsu - * - * PCI initialization for the SDK7780SE03 - * - * May be copied or modified under the terms of the GNU General Public - * License. See linux/COPYING for more information. - */ -#include -#include -#include -#include -#include -#include -#include -#include "pci-sh4.h" - -/* IDSEL [16][17][18][19][20][21][22][23][24][25][26][27][28][29][30][31] */ -static char sdk7780_irq_tab[4][16] __initdata = { - /* INTA */ - { 65, 68, 67, 68, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1 }, - /* INTB */ - { 66, 65, -1, 65, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1 }, - /* INTC */ - { 67, 66, -1, 66, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1 }, - /* INTD */ - { 68, 67, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1 }, -}; - -int __init pcibios_map_platform_irq(struct pci_dev *pdev, u8 slot, u8 pin) -{ - return sdk7780_irq_tab[pin-1][slot]; -} diff --git a/arch/sh/drivers/pci/ops-se7780.c b/arch/sh/drivers/pci/ops-se7780.c deleted file mode 100644 index 6c088cc..0000000 --- a/arch/sh/drivers/pci/ops-se7780.c +++ /dev/null @@ -1,42 +0,0 @@ -/* - * linux/arch/sh/drivers/pci/ops-se7780.c - * - * Copyright (C) 2006 Nobuhiro Iwamatsu - * - * PCI initialization for the Hitachi UL Solution Engine 7780SE03 - * - * May be copied or modified under the terms of the GNU General Public - * License. See linux/COPYING for more information. - */ -#include -#include -#include -#include -#include -#include -#include -#include "pci-sh4.h" - -/* - * IDSEL = AD16 PCI slot - * IDSEL = AD17 PCI slot - * IDSEL = AD18 Serial ATA Controller (Silicon Image SiL3512A) - * IDSEL = AD19 USB Host Controller (NEC uPD7210100A) - */ - -/* IDSEL [16][17][18][19][20][21][22][23][24][25][26][27][28][29][30][31] */ -static char se7780_irq_tab[4][16] __initdata = { - /* INTA */ - { 65, 68, 67, 68, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1 }, - /* INTB */ - { 66, 65, -1, 65, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1 }, - /* INTC */ - { 67, 66, -1, 66, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1 }, - /* INTD */ - { 68, 67, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1 }, -}; - -int __init pcibios_map_platform_irq(struct pci_dev *pdev, u8 slot, u8 pin) -{ - return se7780_irq_tab[pin-1][slot]; -} diff --git a/arch/sh/drivers/pci/ops-sh7785lcr.c b/arch/sh/drivers/pci/ops-sh7785lcr.c deleted file mode 100644 index 0fe423e..0000000 --- a/arch/sh/drivers/pci/ops-sh7785lcr.c +++ /dev/null @@ -1,27 +0,0 @@ -/* - * Author: Ian DaSilva (idasilva@mvista.com) - * - * Highly leveraged from pci-bigsur.c, written by Dustin McIntire. - * - * May be copied or modified under the terms of the GNU General Public - * License. See linux/COPYING for more information. - * - * PCI initialization for the Renesas R0P7785LC0011RL board - * Based on arch/sh/drivers/pci/ops-r7780rp.c - * - */ -#include -#include -#include -#include -#include -#include "pci-sh4.h" - -static char irq_tab[] __initdata = { - 65, 66, 67, 68, -}; - -int __init pcibios_map_platform_irq(struct pci_dev *pdev, u8 slot, u8 pin) -{ - return irq_tab[slot]; -} -- cgit v0.10.2 From 62c7ae87cb5962d3dfaa6d916a15e4faa9e07363 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Fri, 17 Apr 2009 20:37:16 +0900 Subject: sh: pci: Start unifying the SH7780 PCIC initialization. This starts moving out the common initialization bits from the various fixup paths in to the shared init path. Signed-off-by: Paul Mundt diff --git a/arch/sh/drivers/pci/fixups-r7780rp.c b/arch/sh/drivers/pci/fixups-r7780rp.c index 864e92f..15ca65c 100644 --- a/arch/sh/drivers/pci/fixups-r7780rp.c +++ b/arch/sh/drivers/pci/fixups-r7780rp.c @@ -22,33 +22,15 @@ int __init pcibios_map_platform_irq(struct pci_dev *pdev, u8 slot, u8 pin) { return irq_tab[slot]; } + int pci_fixup_pcic(struct pci_channel *chan) { pci_write_reg(chan, 0x000043ff, SH4_PCIINTM); - pci_write_reg(chan, 0x0000380f, SH4_PCIAINTM); - - pci_write_reg(chan, 0xfbb00047, SH7780_PCICMD); pci_write_reg(chan, 0x00000000, SH7780_PCIIBAR); - - pci_write_reg(chan, 0x00011912, SH7780_PCISVID); pci_write_reg(chan, 0x08000000, SH7780_PCICSCR0); pci_write_reg(chan, 0x0000001b, SH7780_PCICSAR0); pci_write_reg(chan, 0xfd000000, SH7780_PCICSCR1); pci_write_reg(chan, 0x0000000f, SH7780_PCICSAR1); - pci_write_reg(chan, 0xfd000000, SH7780_PCIMBR0); - pci_write_reg(chan, 0x00fc0000, SH7780_PCIMBMR0); - -#ifdef CONFIG_32BIT - pci_write_reg(chan, 0xc0000000, SH7780_PCIMBR2); - pci_write_reg(chan, 0x20000000 - SH7780_PCI_IO_SIZE, SH7780_PCIMBMR2); -#endif - - /* Set IOBR for windows containing area specified in pci.h */ - pci_write_reg(chan, chan->io_resource->start & ~(SH7780_PCI_IO_SIZE-1), - SH7780_PCIIOBR); - pci_write_reg(chan, ((SH7780_PCI_IO_SIZE-1) & (7<<18)), - SH7780_PCIIOBMR); - return 0; } diff --git a/arch/sh/drivers/pci/fixups-sdk7780.c b/arch/sh/drivers/pci/fixups-sdk7780.c index da60e99..250b0ed 100644 --- a/arch/sh/drivers/pci/fixups-sdk7780.c +++ b/arch/sh/drivers/pci/fixups-sdk7780.c @@ -35,40 +35,18 @@ int pci_fixup_pcic(struct pci_channel *chan) { /* Enable all interrupts, so we know what to fix */ pci_write_reg(chan, 0x0000C3FF, SH7780_PCIIMR); - pci_write_reg(chan, 0x0000380F, SH7780_PCIAINTM); /* Set up standard PCI config registers */ - pci_write_reg(chan, 0xFB00, SH7780_PCISTATUS); - pci_write_reg(chan, 0x0047, SH7780_PCICMD); - pci_write_reg(chan, 0x00, SH7780_PCIPIF); - pci_write_reg(chan, 0x1912, SH7780_PCISVID); - pci_write_reg(chan, 0x0001, SH7780_PCISID); - pci_write_reg(chan, 0x08000000, SH7780_PCIMBAR0); /* PCI */ - pci_write_reg(chan, 0x08000000, SH7780_PCILAR0); /* SHwy */ - pci_write_reg(chan, 0x07F00001, SH7780_PCILSR); /* size 128M w/ MBAR */ + pci_write_reg(chan, 0x08000000, SH4_PCILAR0); /* SHwy */ + pci_write_reg(chan, 0x07F00001, SH4_PCILSR0); /* size 128M w/ MBAR */ pci_write_reg(chan, 0x00000000, SH7780_PCIMBAR1); - pci_write_reg(chan, 0x00000000, SH7780_PCILAR1); - pci_write_reg(chan, 0x00000000, SH7780_PCILSR1); + pci_write_reg(chan, 0x00000000, SH4_PCILAR1); + pci_write_reg(chan, 0x00000000, SH4_PCILSR1); pci_write_reg(chan, 0xAB000801, SH7780_PCIIBAR); - - /* - * Set the MBR so PCI address is one-to-one with window, - * meaning all calls go straight through... use ifdef to - * catch erroneous assumption. - */ - pci_write_reg(chan, 0xFD000000 , SH7780_PCIMBR0); - pci_write_reg(chan, 0x00FC0000 , SH7780_PCIMBMR0); /* 16M */ - - /* Set IOBR for window containing area specified in pci.h */ - pci_write_reg(chan, chan->io_resource->start & ~(SH7780_PCI_IO_SIZE-1), - SH7780_PCIIOBR); - pci_write_reg(chan, (SH7780_PCI_IO_SIZE-1) & (7 << 18), - SH7780_PCIIOBMR); - - pci_write_reg(chan, 0xA5000C01, SH7780_PCICR); + pci_write_reg(chan, 0xA5000C01, SH4_PCICR); return 0; } diff --git a/arch/sh/drivers/pci/pci-sh7780.c b/arch/sh/drivers/pci/pci-sh7780.c index 07c5529..f02d9df 100644 --- a/arch/sh/drivers/pci/pci-sh7780.c +++ b/arch/sh/drivers/pci/pci-sh7780.c @@ -1,19 +1,12 @@ /* - * Low-Level PCI Support for the SH7780 + * Low-Level PCI Support for the SH7780 * - * Dustin McIntire (dustin@sensoria.com) - * Derived from arch/i386/kernel/pci-*.c which bore the message: - * (c) 1999--2000 Martin Mares - * - * Ported to the new API by Paul Mundt - * With cleanup by Paul van Gool - * - * May be copied or modified under the terms of the GNU General Public - * License. See linux/COPYING for more information. + * Copyright (C) 2005 - 2009 Paul Mundt * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. */ -#undef DEBUG - #include #include #include @@ -117,13 +110,8 @@ int __init pcibios_init_platform(void) pci_cache_line_size = pci_read_reg(chan, SH7780_PCICLS) / 4; - /* set the command/status bits to: - * Wait Cycle Control + Parity Enable + Bus Master + - * Mem space enable - */ - pci_write_reg(chan, 0x00000046, SH7780_PCICMD); - - /* Set IO and Mem windows to local address + /* + * Set IO and Mem windows to local address * Make PCI and local address the same for easy 1 to 1 mapping */ pci_write_reg(chan, sh7780_pci_map.window0.size - 0xfffff, SH4_PCILSR0); @@ -131,9 +119,33 @@ int __init pcibios_init_platform(void) pci_write_reg(chan, sh7780_pci_map.window0.base, SH4_PCILAR0); pci_write_reg(chan, sh7780_pci_map.window0.base, SH7780_PCIMBAR0); + pci_write_reg(chan, 0x0000380f, SH4_PCIAINTM); + + /* Set up standard PCI config registers */ + __raw_writew(0xFB00, chan->reg_base + SH7780_PCISTATUS); + __raw_writew(0x0047, chan->reg_base + SH7780_PCICMD); + __raw_writew(0x1912, chan->reg_base + SH7780_PCISVID); + __raw_writew(0x0001, chan->reg_base + SH7780_PCISID); + + __raw_writeb(0x00, chan->reg_base + SH7780_PCIPIF); + /* Apply any last-minute PCIC fixups */ pci_fixup_pcic(chan); + pci_write_reg(chan, 0xfd000000, SH7780_PCIMBR0); + pci_write_reg(chan, 0x00fc0000, SH7780_PCIMBMR0); + +#ifdef CONFIG_32BIT + pci_write_reg(chan, 0xc0000000, SH7780_PCIMBR2); + pci_write_reg(chan, 0x20000000 - SH7780_PCI_IO_SIZE, SH7780_PCIMBMR2); +#endif + + /* Set IOBR for windows containing area specified in pci.h */ + pci_write_reg(chan, chan->io_resource->start & ~(SH7780_PCI_IO_SIZE-1), + SH7780_PCIIOBR); + pci_write_reg(chan, ((SH7780_PCI_IO_SIZE-1) & (7<<18)), + SH7780_PCIIOBMR); + /* SH7780 init done, set central function init complete */ /* use round robin mode to stop a device starving/overruning */ word = SH4_PCICR_PREFIX | SH4_PCICR_CFIN | SH4_PCICR_FTO; diff --git a/arch/sh/drivers/pci/pci-sh7780.h b/arch/sh/drivers/pci/pci-sh7780.h index 4b65d4b..4a52478 100644 --- a/arch/sh/drivers/pci/pci-sh7780.h +++ b/arch/sh/drivers/pci/pci-sh7780.h @@ -65,11 +65,6 @@ #define SH7780_PCIPMCSR_BSE 0x046 #define SH7780_PCICDD 0x047 -#define SH7780_PCICR 0x100 /* PCI Control Register */ -#define SH7780_PCILSR 0x104 /* PCI Local Space Register0 */ -#define SH7780_PCILSR1 0x108 /* PCI Local Space Register1 */ -#define SH7780_PCILAR0 0x10C /* PCI Local Address Register1 */ -#define SH7780_PCILAR1 0x110 /* PCI Local Address Register1 */ #define SH7780_PCIIR 0x114 /* PCI Interrupt Register */ #define SH7780_PCIIMR 0x118 /* PCI Interrupt Mask Register */ #define SH7780_PCIAIR 0x11C /* Error Address Register */ -- cgit v0.10.2 From e475eedb09ee9a0fd855f3e923aa9af31c17d141 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Wed, 15 Apr 2009 10:50:04 +0000 Subject: clocksource: sh_cmt earlytimer support Add Early Platform Driver support to the sh_cmt driver using the earlytimer class. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt diff --git a/drivers/clocksource/sh_cmt.c b/drivers/clocksource/sh_cmt.c index 1c92c39..02bae39 100644 --- a/drivers/clocksource/sh_cmt.c +++ b/drivers/clocksource/sh_cmt.c @@ -566,9 +566,19 @@ static int sh_cmt_setup(struct sh_cmt_priv *p, struct platform_device *pdev) static int __devinit sh_cmt_probe(struct platform_device *pdev) { struct sh_cmt_priv *p = platform_get_drvdata(pdev); + struct sh_cmt_config *cfg = pdev->dev.platform_data; int ret; - p = kmalloc(sizeof(*p), GFP_KERNEL); + if (p) { + pr_info("sh_cmt: %s kept as earlytimer\n", cfg->name); + return 0; + } + + if (is_early_platform_device(pdev)) + p = alloc_bootmem(sizeof(*p)); + else + p = kmalloc(sizeof(*p), GFP_KERNEL); + if (p == NULL) { dev_err(&pdev->dev, "failed to allocate driver data\n"); return -ENOMEM; @@ -576,7 +586,10 @@ static int __devinit sh_cmt_probe(struct platform_device *pdev) ret = sh_cmt_setup(p, pdev); if (ret) { - kfree(p); + if (is_early_platform_device(pdev)) + free_bootmem(__pa(p), sizeof(*p)); + else + kfree(p); platform_set_drvdata(pdev, NULL); } @@ -606,6 +619,7 @@ static void __exit sh_cmt_exit(void) platform_driver_unregister(&sh_cmt_device_driver); } +early_platform_init("earlytimer", &sh_cmt_device_driver); module_init(sh_cmt_init); module_exit(sh_cmt_exit); -- cgit v0.10.2 From eaab89197b733d0f81f07d6c44294b674479fda8 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Wed, 15 Apr 2009 10:50:12 +0000 Subject: sh: arch earlytimer support Extend the 32-bit SuperH timer code to register and probe the earlytimer class of Early Platform Drivers. This registers the sh_cmt driver if compiled-in. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt diff --git a/arch/sh/kernel/time_32.c b/arch/sh/kernel/time_32.c index c34e1e0..04b8c6a 100644 --- a/arch/sh/kernel/time_32.c +++ b/arch/sh/kernel/time_32.c @@ -17,6 +17,7 @@ #include #include #include /* for rtc_lock */ +#include #include #include #include @@ -229,6 +230,14 @@ void __init time_init(void) #endif /* + * Make sure all compiled-in early timers register themselves. + * Run probe() for one "earlytimer" device. + */ + early_platform_driver_register_all("earlytimer"); + if (early_platform_driver_probe("earlytimer", 1, 0)) + return; + + /* * Find the timer to use as the system timer, it will be * initialized for us. */ -- cgit v0.10.2 From 87a00dc059e3af46303f1f56b0e8df41af988c7b Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Wed, 15 Apr 2009 10:50:21 +0000 Subject: sh: Add plat_early_device_setup() Add a plat_early_device_setup() function to allow processor-specific code to register Early Platform Data. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt diff --git a/arch/sh/include/asm/device.h b/arch/sh/include/asm/device.h index efd511d..8688a88 100644 --- a/arch/sh/include/asm/device.h +++ b/arch/sh/include/asm/device.h @@ -10,3 +10,5 @@ struct platform_device; int platform_resource_setup_memory(struct platform_device *pdev, char *name, unsigned long memsize); +void plat_early_device_setup(void); + diff --git a/arch/sh/kernel/setup.c b/arch/sh/kernel/setup.c index 04a6004..22b976d 100644 --- a/arch/sh/kernel/setup.c +++ b/arch/sh/kernel/setup.c @@ -29,6 +29,7 @@ #include #include #include +#include #include #include #include @@ -328,6 +329,10 @@ static int __init parse_elfcorehdr(char *arg) early_param("elfcorehdr", parse_elfcorehdr); #endif +void __init __attribute__ ((weak)) plat_early_device_setup(void) +{ +} + void __init setup_arch(char **cmdline_p) { enable_mmu(); @@ -381,6 +386,8 @@ void __init setup_arch(char **cmdline_p) parse_early_param(); + plat_early_device_setup(); + sh_mv_setup(); /* -- cgit v0.10.2 From 28fde6863e6ed1f4bfb7cef080e67bf439c20628 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Wed, 15 Apr 2009 10:50:30 +0000 Subject: sh: Early Platform Data for SuperH Mobile Use plat_early_device_setup() to register Early Platform Data for SuperH Mobile processors. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7343.c b/arch/sh/kernel/cpu/sh4a/setup-sh7343.c index c154938..cb5b4db 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7343.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7343.c @@ -234,6 +234,16 @@ static int __init sh7343_devices_setup(void) } __initcall(sh7343_devices_setup); +static struct platform_device *sh7343_early_devices[] __initdata = { + &cmt_device, +}; + +void __init plat_early_device_setup(void) +{ + early_platform_add_devices(sh7343_early_devices, + ARRAY_SIZE(sh7343_early_devices)); +} + enum { UNUSED = 0, diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7366.c b/arch/sh/kernel/cpu/sh4a/setup-sh7366.c index 93ecf8e..2a771f4 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7366.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7366.c @@ -226,6 +226,16 @@ static int __init sh7366_devices_setup(void) } __initcall(sh7366_devices_setup); +static struct platform_device *sh7366_early_devices[] __initdata = { + &cmt_device, +}; + +void __init plat_early_device_setup(void) +{ + early_platform_add_devices(sh7366_early_devices, + ARRAY_SIZE(sh7366_early_devices)); +} + enum { UNUSED=0, diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7722.c b/arch/sh/kernel/cpu/sh4a/setup-sh7722.c index 0e5d204..8f974d0 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7722.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7722.c @@ -270,6 +270,16 @@ static int __init sh7722_devices_setup(void) } __initcall(sh7722_devices_setup); +static struct platform_device *sh7722_early_devices[] __initdata = { + &cmt_device, +}; + +void __init plat_early_device_setup(void) +{ + early_platform_add_devices(sh7722_early_devices, + ARRAY_SIZE(sh7722_early_devices)); +} + enum { UNUSED=0, diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7723.c b/arch/sh/kernel/cpu/sh4a/setup-sh7723.c index 5338dac..21a58d6 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7723.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7723.c @@ -281,6 +281,16 @@ static int __init sh7723_devices_setup(void) } __initcall(sh7723_devices_setup); +static struct platform_device *sh7723_early_devices[] __initdata = { + &cmt_device, +}; + +void __init plat_early_device_setup(void) +{ + early_platform_add_devices(sh7723_early_devices, + ARRAY_SIZE(sh7723_early_devices)); +} + enum { UNUSED=0, -- cgit v0.10.2 From d9aed8b95f062b2f96e37b0e07373f36a6e7066d Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Sun, 19 Apr 2009 13:12:04 +0900 Subject: sh: sh7724: Don't default enable the RTC clock. rtc-sh takes care of this now, so no need to have this always enabled. Signed-off-by: Paul Mundt diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7724.c b/arch/sh/kernel/cpu/sh4a/setup-sh7724.c index 8b87ba8..195274a 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7724.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7724.c @@ -275,7 +275,6 @@ static struct platform_device *sh7724_devices[] __initdata = { static int __init sh7724_devices_setup(void) { - clk_always_enable("rtc0"); /* RTC */ clk_always_enable("vpu0"); /* VPU */ clk_always_enable("veu1"); /* VEU3F1 */ clk_always_enable("veu0"); /* VEU3F0 */ -- cgit v0.10.2 From 8fb2bae4b41eb64f6e233e9bd3f3a789fbb04a06 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Sun, 19 Apr 2009 13:14:29 +0900 Subject: sh: sh7724: Register CMT as an early platform device here too. Follows the SH7722/SH7723 changes. Signed-off-by: Paul Mundt diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7724.c b/arch/sh/kernel/cpu/sh4a/setup-sh7724.c index 195274a..8429396 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7724.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7724.c @@ -288,6 +288,16 @@ static int __init sh7724_devices_setup(void) } device_initcall(sh7724_devices_setup); +static struct platform_device *sh7724_early_devices[] __initdata = { + &cmt_device, +}; + +void __init plat_early_device_setup(void) +{ + early_platform_add_devices(sh7724_early_devices, + ARRAY_SIZE(sh7724_early_devices)); +} + enum { UNUSED = 0, -- cgit v0.10.2 From 9ade1217c9ba39ad2f004a898ddfbb815fd5fe74 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Mon, 20 Apr 2009 15:38:25 +0900 Subject: sh: pci: Drop asm-generic/pci.h, so we can use our own fixups. The new PCI code wants its own bus<->resource mappings instead of the generic equivalents, so drop the asm-generic include in preparation. Signed-off-by: Paul Mundt diff --git a/arch/sh/drivers/pci/pci.c b/arch/sh/drivers/pci/pci.c index 8aaacc9..6d659cd 100644 --- a/arch/sh/drivers/pci/pci.c +++ b/arch/sh/drivers/pci/pci.c @@ -72,6 +72,20 @@ void __devinit __weak pcibios_fixup_bus(struct pci_bus *bus) pci_read_bridge_bases(bus); } +void pcibios_resource_to_bus(struct pci_dev *dev, struct pci_bus_region *region, + struct resource *res) +{ + region->start = res->start; + region->end = res->end; +} + +void pcibios_bus_to_resource(struct pci_dev *dev, struct resource *res, + struct pci_bus_region *region) +{ + res->start = region->start; + res->end = region->end; +} + void pcibios_align_resource(void *data, struct resource *res, resource_size_t size, resource_size_t align) __attribute__ ((weak)); diff --git a/arch/sh/include/asm/pci.h b/arch/sh/include/asm/pci.h index bb2c2fc..69cb615 100644 --- a/arch/sh/include/asm/pci.h +++ b/arch/sh/include/asm/pci.h @@ -146,13 +146,34 @@ int pcibios_map_platform_irq(struct pci_dev *dev, u8 slot, u8 pin); int pciauto_assign_resources(int busno, struct pci_channel *hose); #endif -#endif /* __KERNEL__ */ +extern void pcibios_resource_to_bus(struct pci_dev *dev, + struct pci_bus_region *region, struct resource *res); + +extern void pcibios_bus_to_resource(struct pci_dev *dev, struct resource *res, + struct pci_bus_region *region); + +static inline struct resource * +pcibios_select_root(struct pci_dev *pdev, struct resource *res) +{ + struct resource *root = NULL; + + if (res->flags & IORESOURCE_IO) + root = &ioport_resource; + if (res->flags & IORESOURCE_MEM) + root = &iomem_resource; -/* generic pci stuff */ -#include + return root; +} + +/* Chances are this interrupt is wired PC-style ... */ +static inline int pci_get_legacy_ide_irq(struct pci_dev *dev, int channel) +{ + return channel ? 15 : 14; +} /* generic DMA-mapping stuff */ #include +#endif /* __KERNEL__ */ #endif /* __ASM_SH_PCI_H */ -- cgit v0.10.2 From 4c5107e44514a9bde74d0af77982705d602d9e39 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Mon, 20 Apr 2009 15:43:36 +0900 Subject: sh: pci: Split out new-style PCI core. This splits off a 'pci-new.c' which is aimed at gradually replacing the pci-auto backend and the arch/sh/drivers/pci/pci.c core respectively. Signed-off-by: Paul Mundt diff --git a/arch/sh/drivers/pci/Kconfig b/arch/sh/drivers/pci/Kconfig index 7e816ed..efe8cf9 100644 --- a/arch/sh/drivers/pci/Kconfig +++ b/arch/sh/drivers/pci/Kconfig @@ -18,10 +18,17 @@ config SH_PCIDMA_NONCOHERENT bridge integrated with your SH CPU, refer carefully to the chip specs to see if you can say 'N' here. Otherwise, leave it as 'Y'. +# Temporary config option for transitioning off of PCI_AUTO +config PCI_NEW + bool + depends on PCI + default y if CPU_SUBTYPE_SH7763 || CPU_SUBTYPE_SH7780 || \ + CPU_SUBTYPE_SH7785 + # This is also board-specific config PCI_AUTO bool - depends on PCI + depends on PCI && !PCI_NEW default y config PCI_AUTO_UPDATE_RESOURCES @@ -34,4 +41,3 @@ config PCI_AUTO_UPDATE_RESOURCES for some reason, you have a board that simply refuses to work with its resources updated beyond what they are when the device is powered up, set this to N. Everyone else will want this as Y. - diff --git a/arch/sh/drivers/pci/Makefile b/arch/sh/drivers/pci/Makefile index 5003971..362a1ee 100644 --- a/arch/sh/drivers/pci/Makefile +++ b/arch/sh/drivers/pci/Makefile @@ -2,8 +2,8 @@ # Makefile for the PCI specific kernel interface routines under Linux. # -obj-y += pci.o -obj-$(CONFIG_PCI_AUTO) += pci-auto.o +obj-$(CONFIG_PCI_AUTO) := pci.o pci-auto.o +obj-$(CONFIG_PCI_NEW) := pci-new.o obj-$(CONFIG_CPU_SUBTYPE_SH7751) += pci-sh7751.o ops-sh4.o obj-$(CONFIG_CPU_SUBTYPE_SH7751R) += pci-sh7751.o ops-sh4.o diff --git a/arch/sh/drivers/pci/pci-new.c b/arch/sh/drivers/pci/pci-new.c new file mode 100644 index 0000000..097eb88 --- /dev/null +++ b/arch/sh/drivers/pci/pci-new.c @@ -0,0 +1,248 @@ +/* + * New-style PCI core. + * + * Copyright (c) 2002 M. R. Brown + * Copyright (c) 2004 - 2009 Paul Mundt + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include +#include +#include +#include +#include + +static int __init pcibios_init(void) +{ + struct pci_channel *p; + struct pci_bus *bus; + int busno; + + /* init channels */ + busno = 0; + for (p = board_pci_channels; p->init; p++) { + if (p->init(p) == 0) + p->enabled = 1; + else + pr_err("Unable to init pci channel %d\n", busno); + busno++; + } + + /* scan the buses */ + busno = 0; + for (p = board_pci_channels; p->init; p++) { + if (p->enabled) { + bus = pci_scan_bus(busno, p->pci_ops, p); + busno = bus->subordinate + 1; + + pci_bus_size_bridges(bus); + pci_bus_assign_resources(bus); + pci_enable_bridges(bus); + } + } + + pci_fixup_irqs(pci_common_swizzle, pcibios_map_platform_irq); + + dma_debug_add_bus(&pci_bus_type); + + return 0; +} +subsys_initcall(pcibios_init); + +static void pcibios_fixup_device_resources(struct pci_dev *dev, + struct pci_bus *bus) +{ + /* Update device resources. */ + struct pci_channel *chan = bus->sysdata; + unsigned long offset = 0; + int i; + + for (i = 0; i < PCI_NUM_RESOURCES; i++) { + if (!dev->resource[i].start) + continue; + if (dev->resource[i].flags & IORESOURCE_PCI_FIXED) + continue; + if (dev->resource[i].flags & IORESOURCE_IO) + offset = chan->io_base; + else if (dev->resource[i].flags & IORESOURCE_MEM) + offset = 0; + + dev->resource[i].start += offset; + dev->resource[i].end += offset; + } +} + + +/* + * Called after each bus is probed, but before its children + * are examined. + */ +void __devinit __weak pcibios_fixup_bus(struct pci_bus *bus) +{ + struct pci_dev *dev = bus->self; + struct list_head *ln; + struct pci_channel *chan = bus->sysdata; + + if (!dev) { + bus->resource[0] = chan->io_resource; + bus->resource[1] = chan->mem_resource; + } + + for (ln = bus->devices.next; ln != &bus->devices; ln = ln->next) { + dev = pci_dev_b(ln); + + if ((dev->class >> 8) != PCI_CLASS_BRIDGE_PCI) + pcibios_fixup_device_resources(dev, bus); + } +} + +void pcibios_resource_to_bus(struct pci_dev *dev, struct pci_bus_region *region, + struct resource *res) +{ + struct pci_channel *chan = dev->sysdata; + unsigned long offset = 0; + + if (res->flags & IORESOURCE_IO) + offset = chan->io_base; + else if (res->flags & IORESOURCE_MEM) + offset = 0; + + region->start = res->start - offset; + region->end = res->end - offset; +} + +void __devinit +pcibios_bus_to_resource(struct pci_dev *dev, struct resource *res, + struct pci_bus_region *region) +{ + struct pci_channel *chan = dev->sysdata; + unsigned long offset = 0; + + if (res->flags & IORESOURCE_IO) + offset = chan->io_base; + else if (res->flags & IORESOURCE_MEM) + offset = 0; + + res->start = region->start + offset; + res->end = region->end + offset; +} + +void pcibios_align_resource(void *data, struct resource *res, + resource_size_t size, resource_size_t align) + __attribute__ ((weak)); + +/* + * We need to avoid collisions with `mirrored' VGA ports + * and other strange ISA hardware, so we always want the + * addresses to be allocated in the 0x000-0x0ff region + * modulo 0x400. + */ +void pcibios_align_resource(void *data, struct resource *res, + resource_size_t size, resource_size_t align) +{ + if (res->flags & IORESOURCE_IO) { + resource_size_t start = res->start; + + if (start & 0x300) { + start = (start + 0x3ff) & ~0x3ff; + res->start = start; + } + } +} + +int pcibios_enable_device(struct pci_dev *dev, int mask) +{ + u16 cmd, old_cmd; + int idx; + struct resource *r; + + pci_read_config_word(dev, PCI_COMMAND, &cmd); + old_cmd = cmd; + for(idx=0; idx<6; idx++) { + if (!(mask & (1 << idx))) + continue; + r = &dev->resource[idx]; + if (!r->start && r->end) { + printk(KERN_ERR "PCI: Device %s not available because " + "of resource collisions\n", pci_name(dev)); + return -EINVAL; + } + if (r->flags & IORESOURCE_IO) + cmd |= PCI_COMMAND_IO; + if (r->flags & IORESOURCE_MEM) + cmd |= PCI_COMMAND_MEMORY; + } + if (dev->resource[PCI_ROM_RESOURCE].start) + cmd |= PCI_COMMAND_MEMORY; + if (cmd != old_cmd) { + printk(KERN_INFO "PCI: Enabling device %s (%04x -> %04x)\n", + pci_name(dev), old_cmd, cmd); + pci_write_config_word(dev, PCI_COMMAND, cmd); + } + return 0; +} + +/* + * If we set up a device for bus mastering, we need to check and set + * the latency timer as it may not be properly set. + */ +static unsigned int pcibios_max_latency = 255; + +void pcibios_set_master(struct pci_dev *dev) +{ + u8 lat; + pci_read_config_byte(dev, PCI_LATENCY_TIMER, &lat); + if (lat < 16) + lat = (64 <= pcibios_max_latency) ? 64 : pcibios_max_latency; + else if (lat > pcibios_max_latency) + lat = pcibios_max_latency; + else + return; + printk(KERN_INFO "PCI: Setting latency timer of device %s to %d\n", + pci_name(dev), lat); + pci_write_config_byte(dev, PCI_LATENCY_TIMER, lat); +} + +void __init pcibios_update_irq(struct pci_dev *dev, int irq) +{ + pci_write_config_byte(dev, PCI_INTERRUPT_LINE, irq); +} + +void __iomem *pci_iomap(struct pci_dev *dev, int bar, unsigned long maxlen) +{ + resource_size_t start = pci_resource_start(dev, bar); + resource_size_t len = pci_resource_len(dev, bar); + unsigned long flags = pci_resource_flags(dev, bar); + + if (unlikely(!len || !start)) + return NULL; + if (maxlen && len > maxlen) + len = maxlen; + + /* + * Presently the IORESOURCE_MEM case is a bit special, most + * SH7751 style PCI controllers have PCI memory at a fixed + * location in the address space where no remapping is desired. + * With the IORESOURCE_MEM case more care has to be taken + * to inhibit page table mapping for legacy cores, but this is + * punted off to __ioremap(). + * -- PFM. + */ + if (flags & IORESOURCE_IO) + return ioport_map(start, len); + if (flags & IORESOURCE_MEM) + return ioremap(start, len); + + return NULL; +} +EXPORT_SYMBOL(pci_iomap); + +void pci_iounmap(struct pci_dev *dev, void __iomem *addr) +{ + iounmap(addr); +} +EXPORT_SYMBOL(pci_iounmap); + +EXPORT_SYMBOL(board_pci_channels); -- cgit v0.10.2 From 9833385131fc4e8c52f95320ab899051d1c06831 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Mon, 20 Apr 2009 15:51:45 +0900 Subject: sh: pci: HAVE_PCI_MMAP support. Derived from the MIPS version, now uses pgprot_noncached(). Signed-off-by: Paul Mundt diff --git a/arch/sh/drivers/pci/Makefile b/arch/sh/drivers/pci/Makefile index 362a1ee..c8eab14 100644 --- a/arch/sh/drivers/pci/Makefile +++ b/arch/sh/drivers/pci/Makefile @@ -1,9 +1,9 @@ # # Makefile for the PCI specific kernel interface routines under Linux. # - -obj-$(CONFIG_PCI_AUTO) := pci.o pci-auto.o -obj-$(CONFIG_PCI_NEW) := pci-new.o +obj-y += pci-lib.o +obj-$(CONFIG_PCI_AUTO) += pci.o pci-auto.o +obj-$(CONFIG_PCI_NEW) += pci-new.o obj-$(CONFIG_CPU_SUBTYPE_SH7751) += pci-sh7751.o ops-sh4.o obj-$(CONFIG_CPU_SUBTYPE_SH7751R) += pci-sh7751.o ops-sh4.o diff --git a/arch/sh/drivers/pci/pci-lib.c b/arch/sh/drivers/pci/pci-lib.c new file mode 100644 index 0000000..1a43a35 --- /dev/null +++ b/arch/sh/drivers/pci/pci-lib.c @@ -0,0 +1,26 @@ +#include +#include +#include +#include +#include + +int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma, + enum pci_mmap_state mmap_state, int write_combine) +{ + /* + * I/O space can be accessed via normal processor loads and stores on + * this platform but for now we elect not to do this and portable + * drivers should not do this anyway. + */ + if (mmap_state == pci_mmap_io) + return -EINVAL; + + /* + * Ignore write-combine; for now only return uncached mappings. + */ + vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot); + + return remap_pfn_range(vma, vma->vm_start, vma->vm_pgoff, + vma->vm_end - vma->vm_start, + vma->vm_page_prot); +} diff --git a/arch/sh/include/asm/pci.h b/arch/sh/include/asm/pci.h index 69cb615..46afd44 100644 --- a/arch/sh/include/asm/pci.h +++ b/arch/sh/include/asm/pci.h @@ -40,6 +40,9 @@ extern struct pci_channel board_pci_channels[]; struct pci_dev; +#define HAVE_PCI_MMAP +extern int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma, + enum pci_mmap_state mmap_state, int write_combine); extern void pcibios_set_master(struct pci_dev *dev); static inline void pcibios_penalize_isa_irq(int irq, int active) -- cgit v0.10.2 From a3c0e0d0032d5bbfd7dc04827a257c717d432a5b Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Mon, 20 Apr 2009 16:14:29 +0900 Subject: sh: pci: Consolidate pcibios_align_resource() definitions. This introduces a saner pcibios_align_resource() that can be used regardless of whether pci-auto or pci-new are being used, and consolidates it in pci-lib.c. Signed-off-by: Paul Mundt diff --git a/arch/sh/boards/mach-se/7751/pci.c b/arch/sh/boards/mach-se/7751/pci.c index 203b292..9ec64a4 100644 --- a/arch/sh/boards/mach-se/7751/pci.c +++ b/arch/sh/boards/mach-se/7751/pci.c @@ -30,6 +30,9 @@ #define PCIC_WRITE(x,v) writel((v), PCI_REG(x)) #define PCIC_READ(x) readl(PCI_REG(x)) +#define xPCIBIOS_MIN_IO board_pci_channels->io_resource->start +#define xPCIBIOS_MIN_MEM board_pci_channels->mem_resource->start + /* * Description: This function sets up and initializes the pcic, sets * up the BARS, maps the DRAM into the address space etc, etc. @@ -97,12 +100,12 @@ int __init pcibios_init_platform(void) * meaning all calls go straight through... use BUG_ON to * catch erroneous assumption. */ - BUG_ON(PCIBIOS_MIN_MEM != SH7751_PCI_MEMORY_BASE); + BUG_ON(xPCIBIOS_MIN_MEM != SH7751_PCI_MEMORY_BASE); - PCIC_WRITE(SH7751_PCIMBR, PCIBIOS_MIN_MEM); + PCIC_WRITE(SH7751_PCIMBR, xPCIBIOS_MIN_MEM); /* Set IOBR for window containing area specified in pci.h */ - PCIC_WRITE(SH7751_PCIIOBR, (PCIBIOS_MIN_IO & SH7751_PCIIOBR_MASK)); + PCIC_WRITE(SH7751_PCIIOBR, (xPCIBIOS_MIN_IO & SH7751_PCIIOBR_MASK)); /* All done, may as well say so... */ printk("SH7751 PCI: Finished initialization of the PCI controller\n"); diff --git a/arch/sh/drivers/pci/pci-lib.c b/arch/sh/drivers/pci/pci-lib.c index 1a43a35..8ab1a2d 100644 --- a/arch/sh/drivers/pci/pci-lib.c +++ b/arch/sh/drivers/pci/pci-lib.c @@ -4,6 +4,41 @@ #include #include +unsigned long PCIBIOS_MIN_IO = 0x0000; +unsigned long PCIBIOS_MIN_MEM = 0; + +/* + * We need to avoid collisions with `mirrored' VGA ports + * and other strange ISA hardware, so we always want the + * addresses to be allocated in the 0x000-0x0ff region + * modulo 0x400. + */ +void pcibios_align_resource(void *data, struct resource *res, + resource_size_t size, resource_size_t align) +{ + struct pci_dev *dev = data; + struct pci_channel *chan = dev->sysdata; + resource_size_t start = res->start; + + if (res->flags & IORESOURCE_IO) { + if (start < PCIBIOS_MIN_IO + chan->io_resource->start) + start = PCIBIOS_MIN_IO + chan->io_resource->start; + + /* + * Put everything into 0x00-0xff region modulo 0x400. + */ + if (start & 0x300) { + start = (start + 0x3ff) & ~0x3ff; + res->start = start; + } + } else if (res->flags & IORESOURCE_MEM) { + if (start < PCIBIOS_MIN_MEM + chan->mem_resource->start) + start = PCIBIOS_MIN_MEM + chan->mem_resource->start; + } + + res->start = start; +} + int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma, enum pci_mmap_state mmap_state, int write_combine) { @@ -24,3 +59,10 @@ int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma, vma->vm_end - vma->vm_start, vma->vm_page_prot); } + +#ifdef CONFIG_HOTPLUG +EXPORT_SYMBOL(pcibios_resource_to_bus); +EXPORT_SYMBOL(pcibios_bus_to_resource); +EXPORT_SYMBOL(PCIBIOS_MIN_IO); +EXPORT_SYMBOL(PCIBIOS_MIN_MEM); +#endif diff --git a/arch/sh/drivers/pci/pci-new.c b/arch/sh/drivers/pci/pci-new.c index 097eb88..4e9251f 100644 --- a/arch/sh/drivers/pci/pci-new.c +++ b/arch/sh/drivers/pci/pci-new.c @@ -129,29 +129,6 @@ pcibios_bus_to_resource(struct pci_dev *dev, struct resource *res, res->end = region->end + offset; } -void pcibios_align_resource(void *data, struct resource *res, - resource_size_t size, resource_size_t align) - __attribute__ ((weak)); - -/* - * We need to avoid collisions with `mirrored' VGA ports - * and other strange ISA hardware, so we always want the - * addresses to be allocated in the 0x000-0x0ff region - * modulo 0x400. - */ -void pcibios_align_resource(void *data, struct resource *res, - resource_size_t size, resource_size_t align) -{ - if (res->flags & IORESOURCE_IO) { - resource_size_t start = res->start; - - if (start & 0x300) { - start = (start + 0x3ff) & ~0x3ff; - res->start = start; - } - } -} - int pcibios_enable_device(struct pci_dev *dev, int mask) { u16 cmd, old_cmd; diff --git a/arch/sh/drivers/pci/pci.c b/arch/sh/drivers/pci/pci.c index 6d659cd..f670988 100644 --- a/arch/sh/drivers/pci/pci.c +++ b/arch/sh/drivers/pci/pci.c @@ -86,29 +86,6 @@ void pcibios_bus_to_resource(struct pci_dev *dev, struct resource *res, res->end = region->end; } -void pcibios_align_resource(void *data, struct resource *res, - resource_size_t size, resource_size_t align) - __attribute__ ((weak)); - -/* - * We need to avoid collisions with `mirrored' VGA ports - * and other strange ISA hardware, so we always want the - * addresses to be allocated in the 0x000-0x0ff region - * modulo 0x400. - */ -void pcibios_align_resource(void *data, struct resource *res, - resource_size_t size, resource_size_t align) -{ - if (res->flags & IORESOURCE_IO) { - resource_size_t start = res->start; - - if (start & 0x300) { - start = (start + 0x3ff) & ~0x3ff; - res->start = start; - } - } -} - int pcibios_enable_device(struct pci_dev *dev, int mask) { u16 cmd, old_cmd; diff --git a/arch/sh/include/asm/pci.h b/arch/sh/include/asm/pci.h index 46afd44..5212bf6 100644 --- a/arch/sh/include/asm/pci.h +++ b/arch/sh/include/asm/pci.h @@ -33,10 +33,7 @@ struct pci_channel { */ extern struct pci_channel board_pci_channels[]; -/* ugly as hell, but makes drivers/pci/setup-res.c compile and work */ -#define __PCI_CHAN(bus) ((struct pci_channel *)bus->sysdata) -#define PCIBIOS_MIN_IO __PCI_CHAN(bus)->io_resource->start -#define PCIBIOS_MIN_MEM __PCI_CHAN(bus)->mem_resource->start +extern unsigned long PCIBIOS_MIN_IO, PCIBIOS_MIN_MEM; struct pci_dev; -- cgit v0.10.2 From 394b6d2fe624246e258a218dac68d44fe9a8411f Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Mon, 20 Apr 2009 16:18:46 +0900 Subject: sh: pci: Kill off unused pcibios_fixup(). This is left over cruft that hasn't been used by anything in a long time, kill off bits that weren't purged previously. Signed-off-by: Paul Mundt diff --git a/arch/sh/drivers/pci/ops-snapgear.c b/arch/sh/drivers/pci/ops-snapgear.c index dd2c5df..b64f2b9 100644 --- a/arch/sh/drivers/pci/ops-snapgear.c +++ b/arch/sh/drivers/pci/ops-snapgear.c @@ -85,8 +85,3 @@ int __init pcibios_map_platform_irq(struct pci_dev *pdev, u8 slot, u8 pin) return irq; } - -void __init pcibios_fixup(void) -{ - /* Nothing to fixup .. */ -} diff --git a/arch/sh/include/asm/pci.h b/arch/sh/include/asm/pci.h index 5212bf6..e8265fd 100644 --- a/arch/sh/include/asm/pci.h +++ b/arch/sh/include/asm/pci.h @@ -138,7 +138,6 @@ static inline void __iomem *__get_pci_io_base(unsigned long port, #endif /* Board-specific fixup routines. */ -void pcibios_fixup(void); int pcibios_init_platform(void); int pcibios_map_platform_irq(struct pci_dev *dev, u8 slot, u8 pin); -- cgit v0.10.2 From 0bb34a6bf1f71d5ad2abfda582a2c2794957bc7b Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Mon, 20 Apr 2009 16:38:00 +0900 Subject: sh: pci: Consolidate pci_iomap() and use the generic I/O base. This consolidates the pci_iomap() definitions and reworks how the I/O port base is handled. PCI channels can register their own I/O map base, or if none is provided, the system-wide generic I/O base is used instead. Functionally nothing changes, while this allows us to kill off lots of I/O address special casing and lookups. Signed-off-by: Paul Mundt diff --git a/arch/sh/drivers/pci/pci-lib.c b/arch/sh/drivers/pci/pci-lib.c index 8ab1a2d..654ffcc 100644 --- a/arch/sh/drivers/pci/pci-lib.c +++ b/arch/sh/drivers/pci/pci-lib.c @@ -60,6 +60,57 @@ int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma, vma->vm_page_prot); } +static void __iomem *ioport_map_pci(struct pci_dev *dev, + unsigned long port, unsigned int nr) +{ + struct pci_channel *chan = dev->sysdata; + + if (!chan->io_map_base) + chan->io_map_base = generic_io_base; + + return (void __iomem *)(chan->io_map_base + port); +} + +void __iomem *pci_iomap(struct pci_dev *dev, int bar, unsigned long maxlen) +{ + resource_size_t start = pci_resource_start(dev, bar); + resource_size_t len = pci_resource_len(dev, bar); + unsigned long flags = pci_resource_flags(dev, bar); + + if (unlikely(!len || !start)) + return NULL; + if (maxlen && len > maxlen) + len = maxlen; + + if (flags & IORESOURCE_IO) + return ioport_map_pci(dev, start, len); + + /* + * Presently the IORESOURCE_MEM case is a bit special, most + * SH7751 style PCI controllers have PCI memory at a fixed + * location in the address space where no remapping is desired. + * With the IORESOURCE_MEM case more care has to be taken + * to inhibit page table mapping for legacy cores, but this is + * punted off to __ioremap(). + * -- PFM. + */ + if (flags & IORESOURCE_MEM) { + if (flags & IORESOURCE_CACHEABLE) + return ioremap(start, len); + + return ioremap_nocache(start, len); + } + + return NULL; +} +EXPORT_SYMBOL(pci_iomap); + +void pci_iounmap(struct pci_dev *dev, void __iomem *addr) +{ + iounmap(addr); +} +EXPORT_SYMBOL(pci_iounmap); + #ifdef CONFIG_HOTPLUG EXPORT_SYMBOL(pcibios_resource_to_bus); EXPORT_SYMBOL(pcibios_bus_to_resource); diff --git a/arch/sh/drivers/pci/pci-new.c b/arch/sh/drivers/pci/pci-new.c index 4e9251f..c92e650 100644 --- a/arch/sh/drivers/pci/pci-new.c +++ b/arch/sh/drivers/pci/pci-new.c @@ -187,39 +187,4 @@ void __init pcibios_update_irq(struct pci_dev *dev, int irq) pci_write_config_byte(dev, PCI_INTERRUPT_LINE, irq); } -void __iomem *pci_iomap(struct pci_dev *dev, int bar, unsigned long maxlen) -{ - resource_size_t start = pci_resource_start(dev, bar); - resource_size_t len = pci_resource_len(dev, bar); - unsigned long flags = pci_resource_flags(dev, bar); - - if (unlikely(!len || !start)) - return NULL; - if (maxlen && len > maxlen) - len = maxlen; - - /* - * Presently the IORESOURCE_MEM case is a bit special, most - * SH7751 style PCI controllers have PCI memory at a fixed - * location in the address space where no remapping is desired. - * With the IORESOURCE_MEM case more care has to be taken - * to inhibit page table mapping for legacy cores, but this is - * punted off to __ioremap(). - * -- PFM. - */ - if (flags & IORESOURCE_IO) - return ioport_map(start, len); - if (flags & IORESOURCE_MEM) - return ioremap(start, len); - - return NULL; -} -EXPORT_SYMBOL(pci_iomap); - -void pci_iounmap(struct pci_dev *dev, void __iomem *addr) -{ - iounmap(addr); -} -EXPORT_SYMBOL(pci_iounmap); - EXPORT_SYMBOL(board_pci_channels); diff --git a/arch/sh/drivers/pci/pci.c b/arch/sh/drivers/pci/pci.c index f670988..d39f240 100644 --- a/arch/sh/drivers/pci/pci.c +++ b/arch/sh/drivers/pci/pci.c @@ -144,39 +144,4 @@ void __init pcibios_update_irq(struct pci_dev *dev, int irq) pci_write_config_byte(dev, PCI_INTERRUPT_LINE, irq); } -void __iomem *pci_iomap(struct pci_dev *dev, int bar, unsigned long maxlen) -{ - resource_size_t start = pci_resource_start(dev, bar); - resource_size_t len = pci_resource_len(dev, bar); - unsigned long flags = pci_resource_flags(dev, bar); - - if (unlikely(!len || !start)) - return NULL; - if (maxlen && len > maxlen) - len = maxlen; - - /* - * Presently the IORESOURCE_MEM case is a bit special, most - * SH7751 style PCI controllers have PCI memory at a fixed - * location in the address space where no remapping is desired. - * With the IORESOURCE_MEM case more care has to be taken - * to inhibit page table mapping for legacy cores, but this is - * punted off to __ioremap(). - * -- PFM. - */ - if (flags & IORESOURCE_IO) - return ioport_map(start, len); - if (flags & IORESOURCE_MEM) - return ioremap(start, len); - - return NULL; -} -EXPORT_SYMBOL(pci_iomap); - -void pci_iounmap(struct pci_dev *dev, void __iomem *addr) -{ - iounmap(addr); -} -EXPORT_SYMBOL(pci_iounmap); - EXPORT_SYMBOL(board_pci_channels); diff --git a/arch/sh/include/asm/pci.h b/arch/sh/include/asm/pci.h index e8265fd..5324282 100644 --- a/arch/sh/include/asm/pci.h +++ b/arch/sh/include/asm/pci.h @@ -26,6 +26,8 @@ struct pci_channel { int enabled; unsigned long reg_base; unsigned long io_base; + + unsigned long io_map_base; }; /* @@ -110,31 +112,11 @@ static inline int __is_pci_memory(unsigned long phys_addr, unsigned long size) } return 0; } - -static inline void __iomem *__get_pci_io_base(unsigned long port, - unsigned long size) -{ - struct pci_channel *p; - struct resource *res; - - for (p = board_pci_channels; p->init; p++) { - res = p->io_resource; - if (p->enabled && (port >= res->start) && - (port + size) <= (res->end + 1)) - return (void __iomem *)(p->io_base + port); - } - return NULL; -} #else static inline int __is_pci_memory(unsigned long phys_addr, unsigned long size) { return 0; } -static inline void __iomem *__get_pci_io_base(unsigned long port, - unsigned long size) -{ - return NULL; -} #endif /* Board-specific fixup routines. */ diff --git a/arch/sh/kernel/io.c b/arch/sh/kernel/io.c index 59fb020..4f85fff 100644 --- a/arch/sh/kernel/io.c +++ b/arch/sh/kernel/io.c @@ -70,10 +70,6 @@ void __iomem *ioport_map(unsigned long port, unsigned int nr) if (ret) return ret; - ret = __get_pci_io_base(port, nr); - if (ret) - return ret; - return __ioport_map(port, nr); } EXPORT_SYMBOL(ioport_map); -- cgit v0.10.2 From 99f95f117848088f2708b45c70be73152e78bb8a Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Mon, 20 Apr 2009 18:24:57 +0900 Subject: sh: pci: Rework fixed region checks in ioremap(). Not all PCI channels have non-translatable memory windows, this is a special property of the on-chip PCIC with its 0xfd00... mapping, handle this explicitly. Signed-off-by: Paul Mundt diff --git a/arch/sh/include/asm/pci.h b/arch/sh/include/asm/pci.h index 5324282..82a9369 100644 --- a/arch/sh/include/asm/pci.h +++ b/arch/sh/include/asm/pci.h @@ -90,7 +90,6 @@ static inline void pcibios_penalize_isa_irq(int irq, int active) #define pci_unmap_len_set(PTR, LEN_NAME, VAL) do { } while (0) #endif -#ifdef CONFIG_PCI static inline void pci_dma_burst_advice(struct pci_dev *pdev, enum pci_dma_burst_strategy *strat, unsigned long *strategy_parameter) @@ -99,24 +98,18 @@ static inline void pci_dma_burst_advice(struct pci_dev *pdev, *strategy_parameter = ~0UL; } -static inline int __is_pci_memory(unsigned long phys_addr, unsigned long size) -{ - struct pci_channel *p; - struct resource *res; - - for (p = board_pci_channels; p->init; p++) { - res = p->mem_resource; - if (p->enabled && (phys_addr >= res->start) && - (phys_addr + size) <= (res->end + 1)) - return 1; - } - return 0; -} +#ifdef CONFIG_SUPERH32 +/* + * If we're on an SH7751 or SH7780 PCI controller, PCI memory is mapped + * at the end of the address space in a special non-translatable area. + */ +#define PCI_MEM_FIXED_START 0xfd000000 +#define PCI_MEM_FIXED_END (PCI_MEM_FIXED_START + 0x01000000) + +#define is_pci_memory_fixed_range(s, e) \ + ((s) >= PCI_MEM_FIXED_START && (e) < PCI_MEM_FIXED_END) #else -static inline int __is_pci_memory(unsigned long phys_addr, unsigned long size) -{ - return 0; -} +#define is_pci_memory_fixed_range(s, e) (0) #endif /* Board-specific fixup routines. */ diff --git a/arch/sh/mm/ioremap_32.c b/arch/sh/mm/ioremap_32.c index 7e04cc8..da2f418 100644 --- a/arch/sh/mm/ioremap_32.c +++ b/arch/sh/mm/ioremap_32.c @@ -46,17 +46,15 @@ void __iomem *__ioremap(unsigned long phys_addr, unsigned long size, return NULL; /* - * If we're on an SH7751 or SH7780 PCI controller, PCI memory is - * mapped at the end of the address space (typically 0xfd000000) - * in a non-translatable area, so mapping through page tables for - * this area is not only pointless, but also fundamentally - * broken. Just return the physical address instead. + * If we're in the fixed PCI memory range, mapping through page + * tables is not only pointless, but also fundamentally broken. + * Just return the physical address instead. * * For boards that map a small PCI memory aperture somewhere in * P1/P2 space, ioremap() will already do the right thing, * and we'll never get this far. */ - if (__is_pci_memory(phys_addr, size)) + if (is_pci_memory_fixed_range(phys_addr, size)) return (void __iomem *)phys_addr; #if !defined(CONFIG_PMB_FIXED) @@ -121,7 +119,9 @@ void __iounmap(void __iomem *addr) unsigned long seg = PXSEG(vaddr); struct vm_struct *p; - if (seg < P3SEG || vaddr >= P3_ADDR_MAX || __is_pci_memory(vaddr, 0)) + if (seg < P3SEG || vaddr >= P3_ADDR_MAX) + return; + if (is_pci_memory_fixed_range(vaddr, 0)) return; #ifdef CONFIG_PMB -- cgit v0.10.2 From e79066a659b893debe19010179d3f3f015d76d1c Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Mon, 20 Apr 2009 18:29:22 +0900 Subject: sh: pci: New-style controller registration. This moves off of the board_pci_channels[] approach for bus registration and over to a cleaner register_pci_controller(), all derived from the MIPS code. Signed-off-by: Paul Mundt diff --git a/arch/sh/drivers/pci/pci-new.c b/arch/sh/drivers/pci/pci-new.c index c92e650..78b7292 100644 --- a/arch/sh/drivers/pci/pci-new.c +++ b/arch/sh/drivers/pci/pci-new.c @@ -13,40 +13,90 @@ #include #include #include +#include -static int __init pcibios_init(void) +/* + * The PCI controller list. + */ +static struct pci_channel *hose_head, **hose_tail = &hose_head; + +static int pci_initialized; + +static void __devinit pcibios_scanbus(struct pci_channel *hose) { - struct pci_channel *p; + static int next_busno; struct pci_bus *bus; - int busno; - - /* init channels */ - busno = 0; - for (p = board_pci_channels; p->init; p++) { - if (p->init(p) == 0) - p->enabled = 1; - else - pr_err("Unable to init pci channel %d\n", busno); - busno++; + + /* Catch botched conversion attempts */ + BUG_ON(hose->init); + + bus = pci_scan_bus(next_busno, hose->pci_ops, hose); + if (bus) { + next_busno = bus->subordinate + 1; + /* Don't allow 8-bit bus number overflow inside the hose - + reserve some space for bridges. */ + if (next_busno > 224) + next_busno = 0; + + pci_bus_size_bridges(bus); + pci_bus_assign_resources(bus); + pci_enable_bridges(bus); } +} - /* scan the buses */ - busno = 0; - for (p = board_pci_channels; p->init; p++) { - if (p->enabled) { - bus = pci_scan_bus(busno, p->pci_ops, p); - busno = bus->subordinate + 1; +static DEFINE_MUTEX(pci_scan_mutex); - pci_bus_size_bridges(bus); - pci_bus_assign_resources(bus); - pci_enable_bridges(bus); - } +void __devinit register_pci_controller(struct pci_channel *hose) +{ + if (request_resource(&iomem_resource, hose->mem_resource) < 0) + goto out; + if (request_resource(&ioport_resource, hose->io_resource) < 0) { + release_resource(hose->mem_resource); + goto out; + } + + *hose_tail = hose; + hose_tail = &hose->next; + + /* + * Do not panic here but later - this might hapen before console init. + */ + if (!hose->io_map_base) { + printk(KERN_WARNING + "registering PCI controller with io_map_base unset\n"); + } + + /* + * Scan the bus if it is register after the PCI subsystem + * initialization. + */ + if (pci_initialized) { + mutex_lock(&pci_scan_mutex); + pcibios_scanbus(hose); + mutex_unlock(&pci_scan_mutex); } + return; + +out: + printk(KERN_WARNING + "Skipping PCI bus scan due to resource conflict\n"); +} + +static int __init pcibios_init(void) +{ + struct pci_channel *hose; + + /* Scan all of the recorded PCI controllers. */ + for (hose = hose_head; hose; hose = hose->next) + pcibios_scanbus(hose); + pci_fixup_irqs(pci_common_swizzle, pcibios_map_platform_irq); dma_debug_add_bus(&pci_bus_type); + pci_initialized = 1; + return 0; } subsys_initcall(pcibios_init); @@ -74,7 +124,6 @@ static void pcibios_fixup_device_resources(struct pci_dev *dev, } } - /* * Called after each bus is probed, but before its children * are examined. @@ -186,5 +235,3 @@ void __init pcibios_update_irq(struct pci_dev *dev, int irq) { pci_write_config_byte(dev, PCI_INTERRUPT_LINE, irq); } - -EXPORT_SYMBOL(board_pci_channels); diff --git a/arch/sh/drivers/pci/pci-sh7780.c b/arch/sh/drivers/pci/pci-sh7780.c index f02d9df..4dd6e3b 100644 --- a/arch/sh/drivers/pci/pci-sh7780.c +++ b/arch/sh/drivers/pci/pci-sh7780.c @@ -15,11 +15,47 @@ #include #include "pci-sh4.h" -static int __init sh7780_pci_init(struct pci_channel *chan) +extern u8 pci_cache_line_size; + +static struct resource sh7785_io_resource = { + .name = "SH7785_IO", + .start = SH7780_PCI_IO_BASE, + .end = SH7780_PCI_IO_BASE + SH7780_PCI_IO_SIZE - 1, + .flags = IORESOURCE_IO +}; + +static struct resource sh7785_mem_resource = { + .name = "SH7785_mem", + .start = SH7780_PCI_MEMORY_BASE, + .end = SH7780_PCI_MEMORY_BASE + SH7780_PCI_MEM_SIZE - 1, + .flags = IORESOURCE_MEM +}; + +static struct pci_channel sh7780_pci_controller = { + .pci_ops = &sh4_pci_ops, + .mem_resource = &sh7785_mem_resource, + .io_resource = &sh7785_io_resource, +}; + +static struct sh4_pci_address_map sh7780_pci_map = { + .window0 = { +#if defined(CONFIG_32BIT) + .base = SH7780_32BIT_DDR_BASE_ADDR, + .size = 0x40000000, +#else + .base = SH7780_CS0_BASE_ADDR, + .size = 0x20000000, +#endif + }, +}; + +static int __init sh7780_pci_init(void) { + struct pci_channel *chan = &sh7780_pci_controller; unsigned int id; const char *type = NULL; int ret; + u32 word; printk(KERN_NOTICE "PCI: Starting intialization.\n"); @@ -55,52 +91,6 @@ static int __init sh7780_pci_init(struct pci_channel *chan) return ret; /* - * Platform specific initialization (BSC registers, and memory space - * mapping) will be called via the platform defined function - * pcibios_init_platform(). - */ - return pcibios_init_platform(); -} - -extern u8 pci_cache_line_size; - -static struct resource sh7785_io_resource = { - .name = "SH7785_IO", - .start = SH7780_PCI_IO_BASE, - .end = SH7780_PCI_IO_BASE + SH7780_PCI_IO_SIZE - 1, - .flags = IORESOURCE_IO -}; - -static struct resource sh7785_mem_resource = { - .name = "SH7785_mem", - .start = SH7780_PCI_MEMORY_BASE, - .end = SH7780_PCI_MEMORY_BASE + SH7780_PCI_MEM_SIZE - 1, - .flags = IORESOURCE_MEM -}; - -struct pci_channel board_pci_channels[] = { - { sh7780_pci_init, &sh4_pci_ops, &sh7785_io_resource, &sh7785_mem_resource, 0, 0xff }, - { NULL, NULL, NULL, 0, 0 }, -}; - -static struct sh4_pci_address_map sh7780_pci_map = { - .window0 = { -#if defined(CONFIG_32BIT) - .base = SH7780_32BIT_DDR_BASE_ADDR, - .size = 0x40000000, -#else - .base = SH7780_CS0_BASE_ADDR, - .size = 0x20000000, -#endif - }, -}; - -int __init pcibios_init_platform(void) -{ - struct pci_channel *chan = &board_pci_channels[0]; - u32 word; - - /* * Set the class and sub-class codes. */ __raw_writeb(PCI_CLASS_BRIDGE_HOST >> 8, @@ -153,5 +143,8 @@ int __init pcibios_init_platform(void) __set_io_port_base(SH7780_PCI_IO_BASE); + register_pci_controller(chan); + return 0; } +arch_initcall(sh7780_pci_init); diff --git a/arch/sh/include/asm/pci.h b/arch/sh/include/asm/pci.h index 82a9369..e057ebd 100644 --- a/arch/sh/include/asm/pci.h +++ b/arch/sh/include/asm/pci.h @@ -17,17 +17,22 @@ * external) PCI controllers. */ struct pci_channel { - int (*init)(struct pci_channel *chan); - struct pci_ops *pci_ops; - struct resource *io_resource; - struct resource *mem_resource; - int first_devfn; - int last_devfn; - int enabled; - unsigned long reg_base; - unsigned long io_base; - - unsigned long io_map_base; + struct pci_channel *next; + + int (*init)(struct pci_channel *chan); + + struct pci_ops *pci_ops; + struct resource *io_resource; + struct resource *mem_resource; + + int first_devfn; + int last_devfn; + int enabled; + + unsigned long reg_base; + unsigned long io_base; + + unsigned long io_map_base; }; /* @@ -35,6 +40,8 @@ struct pci_channel { */ extern struct pci_channel board_pci_channels[]; +extern void register_pci_controller(struct pci_channel *hose); + extern unsigned long PCIBIOS_MIN_IO, PCIBIOS_MIN_MEM; struct pci_dev; -- cgit v0.10.2 From 09cfeb133e3cac39b8b9a2cb1d8ab4f77e396248 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Mon, 20 Apr 2009 18:42:00 +0900 Subject: sh: pci: Track io and mem_offset per-channel. This implements a per-hose offset for I/O and mem resources. Signed-off-by: Paul Mundt diff --git a/arch/sh/drivers/pci/pci-new.c b/arch/sh/drivers/pci/pci-new.c index 78b7292..e8ac8da 100644 --- a/arch/sh/drivers/pci/pci-new.c +++ b/arch/sh/drivers/pci/pci-new.c @@ -105,7 +105,7 @@ static void pcibios_fixup_device_resources(struct pci_dev *dev, struct pci_bus *bus) { /* Update device resources. */ - struct pci_channel *chan = bus->sysdata; + struct pci_channel *hose = bus->sysdata; unsigned long offset = 0; int i; @@ -115,9 +115,9 @@ static void pcibios_fixup_device_resources(struct pci_dev *dev, if (dev->resource[i].flags & IORESOURCE_PCI_FIXED) continue; if (dev->resource[i].flags & IORESOURCE_IO) - offset = chan->io_base; + offset = hose->io_offset; else if (dev->resource[i].flags & IORESOURCE_MEM) - offset = 0; + offset = hose->mem_offset; dev->resource[i].start += offset; dev->resource[i].end += offset; @@ -150,13 +150,13 @@ void __devinit __weak pcibios_fixup_bus(struct pci_bus *bus) void pcibios_resource_to_bus(struct pci_dev *dev, struct pci_bus_region *region, struct resource *res) { - struct pci_channel *chan = dev->sysdata; + struct pci_channel *hose = dev->sysdata; unsigned long offset = 0; if (res->flags & IORESOURCE_IO) - offset = chan->io_base; + offset = hose->io_offset; else if (res->flags & IORESOURCE_MEM) - offset = 0; + offset = hose->mem_offset; region->start = res->start - offset; region->end = res->end - offset; @@ -166,13 +166,13 @@ void __devinit pcibios_bus_to_resource(struct pci_dev *dev, struct resource *res, struct pci_bus_region *region) { - struct pci_channel *chan = dev->sysdata; + struct pci_channel *hose = dev->sysdata; unsigned long offset = 0; if (res->flags & IORESOURCE_IO) - offset = chan->io_base; + offset = hose->io_offset; else if (res->flags & IORESOURCE_MEM) - offset = 0; + offset = hose->mem_offset; res->start = region->start + offset; res->end = region->end + offset; diff --git a/arch/sh/drivers/pci/pci-sh7780.c b/arch/sh/drivers/pci/pci-sh7780.c index 4dd6e3b..57a3b87 100644 --- a/arch/sh/drivers/pci/pci-sh7780.c +++ b/arch/sh/drivers/pci/pci-sh7780.c @@ -34,7 +34,9 @@ static struct resource sh7785_mem_resource = { static struct pci_channel sh7780_pci_controller = { .pci_ops = &sh4_pci_ops, .mem_resource = &sh7785_mem_resource, + .mem_offset = 0x00000000, .io_resource = &sh7785_io_resource, + .io_offset = 0x00000000, }; static struct sh4_pci_address_map sh7780_pci_map = { diff --git a/arch/sh/include/asm/pci.h b/arch/sh/include/asm/pci.h index e057ebd..0be2052 100644 --- a/arch/sh/include/asm/pci.h +++ b/arch/sh/include/asm/pci.h @@ -25,6 +25,9 @@ struct pci_channel { struct resource *io_resource; struct resource *mem_resource; + unsigned long io_offset; + unsigned long mem_offset; + int first_devfn; int last_devfn; int enabled; -- cgit v0.10.2 From 5160d3f782a5e0cdb3bdaa8a891a1fb9d9ab83ec Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Mon, 20 Apr 2009 18:47:21 +0900 Subject: sh: pci: Consolidate bus<->resource mapping in pci-lib. Now that the io and mem offsets are tracked accordingly, the pci-new version of the bus<->resource mappers can be used generically. This moves them in to pci-lib. Signed-off-by: Paul Mundt diff --git a/arch/sh/drivers/pci/pci-lib.c b/arch/sh/drivers/pci/pci-lib.c index 654ffcc..9fd3af9 100644 --- a/arch/sh/drivers/pci/pci-lib.c +++ b/arch/sh/drivers/pci/pci-lib.c @@ -39,6 +39,37 @@ void pcibios_align_resource(void *data, struct resource *res, res->start = start; } +void pcibios_resource_to_bus(struct pci_dev *dev, struct pci_bus_region *region, + struct resource *res) +{ + struct pci_channel *hose = dev->sysdata; + unsigned long offset = 0; + + if (res->flags & IORESOURCE_IO) + offset = hose->io_offset; + else if (res->flags & IORESOURCE_MEM) + offset = hose->mem_offset; + + region->start = res->start - offset; + region->end = res->end - offset; +} + +void __devinit +pcibios_bus_to_resource(struct pci_dev *dev, struct resource *res, + struct pci_bus_region *region) +{ + struct pci_channel *hose = dev->sysdata; + unsigned long offset = 0; + + if (res->flags & IORESOURCE_IO) + offset = hose->io_offset; + else if (res->flags & IORESOURCE_MEM) + offset = hose->mem_offset; + + res->start = region->start + offset; + res->end = region->end + offset; +} + int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma, enum pci_mmap_state mmap_state, int write_combine) { diff --git a/arch/sh/drivers/pci/pci-new.c b/arch/sh/drivers/pci/pci-new.c index e8ac8da..9d42614 100644 --- a/arch/sh/drivers/pci/pci-new.c +++ b/arch/sh/drivers/pci/pci-new.c @@ -147,37 +147,6 @@ void __devinit __weak pcibios_fixup_bus(struct pci_bus *bus) } } -void pcibios_resource_to_bus(struct pci_dev *dev, struct pci_bus_region *region, - struct resource *res) -{ - struct pci_channel *hose = dev->sysdata; - unsigned long offset = 0; - - if (res->flags & IORESOURCE_IO) - offset = hose->io_offset; - else if (res->flags & IORESOURCE_MEM) - offset = hose->mem_offset; - - region->start = res->start - offset; - region->end = res->end - offset; -} - -void __devinit -pcibios_bus_to_resource(struct pci_dev *dev, struct resource *res, - struct pci_bus_region *region) -{ - struct pci_channel *hose = dev->sysdata; - unsigned long offset = 0; - - if (res->flags & IORESOURCE_IO) - offset = hose->io_offset; - else if (res->flags & IORESOURCE_MEM) - offset = hose->mem_offset; - - res->start = region->start + offset; - res->end = region->end + offset; -} - int pcibios_enable_device(struct pci_dev *dev, int mask) { u16 cmd, old_cmd; diff --git a/arch/sh/drivers/pci/pci.c b/arch/sh/drivers/pci/pci.c index d39f240..c15a6f0 100644 --- a/arch/sh/drivers/pci/pci.c +++ b/arch/sh/drivers/pci/pci.c @@ -72,20 +72,6 @@ void __devinit __weak pcibios_fixup_bus(struct pci_bus *bus) pci_read_bridge_bases(bus); } -void pcibios_resource_to_bus(struct pci_dev *dev, struct pci_bus_region *region, - struct resource *res) -{ - region->start = res->start; - region->end = res->end; -} - -void pcibios_bus_to_resource(struct pci_dev *dev, struct resource *res, - struct pci_bus_region *region) -{ - res->start = region->start; - res->end = region->end; -} - int pcibios_enable_device(struct pci_dev *dev, int mask) { u16 cmd, old_cmd; -- cgit v0.10.2 From 3f8daeacd7ed7a502daf0998e2515cea4f467f21 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Mon, 20 Apr 2009 18:53:41 +0900 Subject: sh: pci: Consolidate the remaining common bits. This moves the remaining common bits in to pci-lib. Thereby reducing pci.c/pci-new.c to simple bus fixups and controller registration. As more platforms are moved over, the old code will disappear completely and the pci-new bits will be rolled in to pci-lib, eventually replacing pci.c completely. Signed-off-by: Paul Mundt diff --git a/arch/sh/drivers/pci/pci-lib.c b/arch/sh/drivers/pci/pci-lib.c index 9fd3af9..ea83629 100644 --- a/arch/sh/drivers/pci/pci-lib.c +++ b/arch/sh/drivers/pci/pci-lib.c @@ -70,6 +70,70 @@ pcibios_bus_to_resource(struct pci_dev *dev, struct resource *res, res->end = region->end + offset; } +int pcibios_enable_device(struct pci_dev *dev, int mask) +{ + u16 cmd, old_cmd; + int idx; + struct resource *r; + + pci_read_config_word(dev, PCI_COMMAND, &cmd); + old_cmd = cmd; + for (idx=0; idx < PCI_NUM_RESOURCES; idx++) { + /* Only set up the requested stuff */ + if (!(mask & (1<resource[idx]; + if (!(r->flags & (IORESOURCE_IO | IORESOURCE_MEM))) + continue; + if ((idx == PCI_ROM_RESOURCE) && + (!(r->flags & IORESOURCE_ROM_ENABLE))) + continue; + if (!r->start && r->end) { + printk(KERN_ERR "PCI: Device %s not available " + "because of resource collisions\n", + pci_name(dev)); + return -EINVAL; + } + if (r->flags & IORESOURCE_IO) + cmd |= PCI_COMMAND_IO; + if (r->flags & IORESOURCE_MEM) + cmd |= PCI_COMMAND_MEMORY; + } + if (cmd != old_cmd) { + printk("PCI: Enabling device %s (%04x -> %04x)\n", + pci_name(dev), old_cmd, cmd); + pci_write_config_word(dev, PCI_COMMAND, cmd); + } + return 0; +} + +/* + * If we set up a device for bus mastering, we need to check and set + * the latency timer as it may not be properly set. + */ +static unsigned int pcibios_max_latency = 255; + +void pcibios_set_master(struct pci_dev *dev) +{ + u8 lat; + pci_read_config_byte(dev, PCI_LATENCY_TIMER, &lat); + if (lat < 16) + lat = (64 <= pcibios_max_latency) ? 64 : pcibios_max_latency; + else if (lat > pcibios_max_latency) + lat = pcibios_max_latency; + else + return; + printk(KERN_INFO "PCI: Setting latency timer of device %s to %d\n", + pci_name(dev), lat); + pci_write_config_byte(dev, PCI_LATENCY_TIMER, lat); +} + +void __init pcibios_update_irq(struct pci_dev *dev, int irq) +{ + pci_write_config_byte(dev, PCI_INTERRUPT_LINE, irq); +} + int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma, enum pci_mmap_state mmap_state, int write_combine) { diff --git a/arch/sh/drivers/pci/pci-new.c b/arch/sh/drivers/pci/pci-new.c index 9d42614..8c0b136 100644 --- a/arch/sh/drivers/pci/pci-new.c +++ b/arch/sh/drivers/pci/pci-new.c @@ -146,61 +146,3 @@ void __devinit __weak pcibios_fixup_bus(struct pci_bus *bus) pcibios_fixup_device_resources(dev, bus); } } - -int pcibios_enable_device(struct pci_dev *dev, int mask) -{ - u16 cmd, old_cmd; - int idx; - struct resource *r; - - pci_read_config_word(dev, PCI_COMMAND, &cmd); - old_cmd = cmd; - for(idx=0; idx<6; idx++) { - if (!(mask & (1 << idx))) - continue; - r = &dev->resource[idx]; - if (!r->start && r->end) { - printk(KERN_ERR "PCI: Device %s not available because " - "of resource collisions\n", pci_name(dev)); - return -EINVAL; - } - if (r->flags & IORESOURCE_IO) - cmd |= PCI_COMMAND_IO; - if (r->flags & IORESOURCE_MEM) - cmd |= PCI_COMMAND_MEMORY; - } - if (dev->resource[PCI_ROM_RESOURCE].start) - cmd |= PCI_COMMAND_MEMORY; - if (cmd != old_cmd) { - printk(KERN_INFO "PCI: Enabling device %s (%04x -> %04x)\n", - pci_name(dev), old_cmd, cmd); - pci_write_config_word(dev, PCI_COMMAND, cmd); - } - return 0; -} - -/* - * If we set up a device for bus mastering, we need to check and set - * the latency timer as it may not be properly set. - */ -static unsigned int pcibios_max_latency = 255; - -void pcibios_set_master(struct pci_dev *dev) -{ - u8 lat; - pci_read_config_byte(dev, PCI_LATENCY_TIMER, &lat); - if (lat < 16) - lat = (64 <= pcibios_max_latency) ? 64 : pcibios_max_latency; - else if (lat > pcibios_max_latency) - lat = pcibios_max_latency; - else - return; - printk(KERN_INFO "PCI: Setting latency timer of device %s to %d\n", - pci_name(dev), lat); - pci_write_config_byte(dev, PCI_LATENCY_TIMER, lat); -} - -void __init pcibios_update_irq(struct pci_dev *dev, int irq) -{ - pci_write_config_byte(dev, PCI_INTERRUPT_LINE, irq); -} diff --git a/arch/sh/drivers/pci/pci.c b/arch/sh/drivers/pci/pci.c index c15a6f0..8c332b2 100644 --- a/arch/sh/drivers/pci/pci.c +++ b/arch/sh/drivers/pci/pci.c @@ -72,62 +72,4 @@ void __devinit __weak pcibios_fixup_bus(struct pci_bus *bus) pci_read_bridge_bases(bus); } -int pcibios_enable_device(struct pci_dev *dev, int mask) -{ - u16 cmd, old_cmd; - int idx; - struct resource *r; - - pci_read_config_word(dev, PCI_COMMAND, &cmd); - old_cmd = cmd; - for(idx=0; idx<6; idx++) { - if (!(mask & (1 << idx))) - continue; - r = &dev->resource[idx]; - if (!r->start && r->end) { - printk(KERN_ERR "PCI: Device %s not available because " - "of resource collisions\n", pci_name(dev)); - return -EINVAL; - } - if (r->flags & IORESOURCE_IO) - cmd |= PCI_COMMAND_IO; - if (r->flags & IORESOURCE_MEM) - cmd |= PCI_COMMAND_MEMORY; - } - if (dev->resource[PCI_ROM_RESOURCE].start) - cmd |= PCI_COMMAND_MEMORY; - if (cmd != old_cmd) { - printk(KERN_INFO "PCI: Enabling device %s (%04x -> %04x)\n", - pci_name(dev), old_cmd, cmd); - pci_write_config_word(dev, PCI_COMMAND, cmd); - } - return 0; -} - -/* - * If we set up a device for bus mastering, we need to check and set - * the latency timer as it may not be properly set. - */ -static unsigned int pcibios_max_latency = 255; - -void pcibios_set_master(struct pci_dev *dev) -{ - u8 lat; - pci_read_config_byte(dev, PCI_LATENCY_TIMER, &lat); - if (lat < 16) - lat = (64 <= pcibios_max_latency) ? 64 : pcibios_max_latency; - else if (lat > pcibios_max_latency) - lat = pcibios_max_latency; - else - return; - printk(KERN_INFO "PCI: Setting latency timer of device %s to %d\n", - pci_name(dev), lat); - pci_write_config_byte(dev, PCI_LATENCY_TIMER, lat); -} - -void __init pcibios_update_irq(struct pci_dev *dev, int irq) -{ - pci_write_config_byte(dev, PCI_INTERRUPT_LINE, irq); -} - EXPORT_SYMBOL(board_pci_channels); -- cgit v0.10.2 From 5ba7205fc49ff72e88784c94fb661f93e7ae7d36 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Mon, 20 Apr 2009 19:00:32 +0900 Subject: sh: pci: Kill off the now unused hose->io_base. Nothing is using this any more, so kill it off. Signed-off-by: Paul Mundt diff --git a/arch/sh/drivers/pci/pci-sh7751.c b/arch/sh/drivers/pci/pci-sh7751.c index af887443..4c08fd7 100644 --- a/arch/sh/drivers/pci/pci-sh7751.c +++ b/arch/sh/drivers/pci/pci-sh7751.c @@ -40,7 +40,6 @@ int __init sh7751_pci_init(struct pci_channel *chan) pr_debug("PCI: Starting intialization.\n"); chan->reg_base = 0xfe200000; - chan->io_base = 0xfe240000; /* check for SH7751/SH7751R hardware */ id = pci_read_reg(chan, SH7751_PCICONF0); @@ -136,13 +135,6 @@ int __init sh7751_pcic_init(struct pci_channel *chan, pr_debug("PCI: Setting upper bits of Memory window to 0x%x\n", word); pci_write_reg(chan, word , SH4_PCIMBR); - /* Map IO space into PCI IO window: - * IO addresses will be translated to the PCI IO window base address - */ - pr_debug("PCI: Mapping IO address 0x%x - 0x%x to base 0x%lx\n", - chan->io_resource->start, chan->io_resource->end, - chan->io_base + chan->io_resource->start); - /* Make sure the MSB's of IO window are set to access PCI space * correctly */ word = chan->io_resource->start & SH4_PCIIOBR_MASK; diff --git a/arch/sh/drivers/pci/pci-sh7780.c b/arch/sh/drivers/pci/pci-sh7780.c index 57a3b87..ae13ff9 100644 --- a/arch/sh/drivers/pci/pci-sh7780.c +++ b/arch/sh/drivers/pci/pci-sh7780.c @@ -62,7 +62,6 @@ static int __init sh7780_pci_init(void) printk(KERN_NOTICE "PCI: Starting intialization.\n"); chan->reg_base = 0xfe040000; - chan->io_base = 0xfe200000; /* Enable CPU access to the PCIC registers. */ __raw_writel(PCIECR_ENBL, PCIECR); diff --git a/arch/sh/include/asm/pci.h b/arch/sh/include/asm/pci.h index 0be2052..f36c789 100644 --- a/arch/sh/include/asm/pci.h +++ b/arch/sh/include/asm/pci.h @@ -33,7 +33,6 @@ struct pci_channel { int enabled; unsigned long reg_base; - unsigned long io_base; unsigned long io_map_base; }; -- cgit v0.10.2 From bb3396477bf46c7cae6bd04b969580277957966e Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Mon, 20 Apr 2009 19:26:45 +0900 Subject: sh: pci: Kill off superfluous lboxre2 pci fixups. This is a verbatim copy of the r2d one, use that instead. Signed-off-by: Paul Mundt diff --git a/arch/sh/drivers/pci/Makefile b/arch/sh/drivers/pci/Makefile index c8eab14..4cac866 100644 --- a/arch/sh/drivers/pci/Makefile +++ b/arch/sh/drivers/pci/Makefile @@ -22,5 +22,5 @@ obj-$(CONFIG_SH_SDK7780) += fixups-sdk7780.o obj-$(CONFIG_SH_7780_SOLUTION_ENGINE) += fixups-sdk7780.o obj-$(CONFIG_SH_TITAN) += ops-titan.o obj-$(CONFIG_SH_LANDISK) += ops-landisk.o -obj-$(CONFIG_SH_LBOX_RE2) += ops-lboxre2.o fixups-lboxre2.o +obj-$(CONFIG_SH_LBOX_RE2) += ops-lboxre2.o fixups-rts7751r2d.o obj-$(CONFIG_SH_CAYMAN) += ops-cayman.o diff --git a/arch/sh/drivers/pci/fixups-lboxre2.c b/arch/sh/drivers/pci/fixups-lboxre2.c deleted file mode 100644 index a82011d..0000000 --- a/arch/sh/drivers/pci/fixups-lboxre2.c +++ /dev/null @@ -1,42 +0,0 @@ -/* - * arch/sh/drivers/pci/fixups-lboxre2.c - * - * L-BOX RE2 PCI fixups - * - * Copyright (C) 2007 Nobuhiro Iwamatsu - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ -#include -#include "pci-sh4.h" - -#define PCIMCR_MRSET_OFF 0xBFFFFFFF -#define PCIMCR_RFSH_OFF 0xFFFFFFFB - -int pci_fixup_pcic(struct pci_channel *chan) -{ - unsigned long bcr1, mcr; - - bcr1 = ctrl_inl(SH7751_BCR1); - bcr1 |= 0x40080000; /* Enable Bit 19 BREQEN, set PCIC to slave */ - pci_write_reg(chan, bcr1, SH4_PCIBCR1); - - /* Enable all interrupts, so we known what to fix */ - pci_write_reg(chan, 0x0000c3ff, SH4_PCIINTM); - pci_write_reg(chan, 0x0000380f, SH4_PCIAINTM); - pci_write_reg(chan, 0xfb900047, SH7751_PCICONF1); - pci_write_reg(chan, 0xab000001, SH7751_PCICONF4); - - mcr = ctrl_inl(SH7751_MCR); - mcr = (mcr & PCIMCR_MRSET_OFF) & PCIMCR_RFSH_OFF; - pci_write_reg(chan, mcr, SH4_PCIMCR); - - pci_write_reg(chan, 0x0c000000, SH7751_PCICONF5); - pci_write_reg(chan, 0xd0000000, SH7751_PCICONF6); - pci_write_reg(chan, 0x0c000000, SH4_PCILAR0); - pci_write_reg(chan, 0x00000000, SH4_PCILAR1); - - return 0; -} -- cgit v0.10.2 From d556fcc101c4b0d57ac9742ab806a6bfed78eac1 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Mon, 20 Apr 2009 19:31:20 +0900 Subject: sh: pci: Flag the dreamcast BBA as IORESOURCE_PCI_FIXED. This isn't a real BAR, so prevent any attempts to move it, as we don't wish to encourage a bus luck by overzealous PCI initialization code. Signed-off-by: Paul Mundt diff --git a/arch/sh/drivers/pci/fixups-dreamcast.c b/arch/sh/drivers/pci/fixups-dreamcast.c index 2bf85cf..48c6381 100644 --- a/arch/sh/drivers/pci/fixups-dreamcast.c +++ b/arch/sh/drivers/pci/fixups-dreamcast.c @@ -41,6 +41,13 @@ static void __init gapspci_fixup_resources(struct pci_dev *dev) */ dev->resource[1].start = p->io_resource->start + 0x100; dev->resource[1].end = dev->resource[1].start + 0x200 - 1; + + /* + * This is not a normal BAR, prevent any attempts to move + * the BAR, as this will result in a bus lock. + */ + dev->resource[1].flags |= IORESOURCE_PCI_FIXED; + /* * Redirect dma memory allocations to special memory window. */ -- cgit v0.10.2 From c563bf0965c86cc6087b09c34ca063fe96d6deca Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Mon, 20 Apr 2009 19:39:57 +0900 Subject: sh: pci: Kill off dead references to is_pci_ioaddr and friends. Some old boards are still using this in their I/O routines, kill it off. Signed-off-by: Paul Mundt diff --git a/arch/sh/boards/mach-se/7751/io.c b/arch/sh/boards/mach-se/7751/io.c index 6287ae5..6e75bd4 100644 --- a/arch/sh/boards/mach-se/7751/io.c +++ b/arch/sh/boards/mach-se/7751/io.c @@ -34,8 +34,6 @@ unsigned char sh7751se_inb(unsigned long port) { if (PXSEG(port)) return *(volatile unsigned char *)port; - else if (is_pci_ioaddr(port)) - return *(volatile unsigned char *)pci_ioaddr(port); else return (*port2adr(port)) & 0xff; } @@ -46,8 +44,6 @@ unsigned char sh7751se_inb_p(unsigned long port) if (PXSEG(port)) v = *(volatile unsigned char *)port; - else if (is_pci_ioaddr(port)) - v = *(volatile unsigned char *)pci_ioaddr(port); else v = (*port2adr(port)) & 0xff; ctrl_delay(); @@ -58,8 +54,6 @@ unsigned short sh7751se_inw(unsigned long port) { if (PXSEG(port)) return *(volatile unsigned short *)port; - else if (is_pci_ioaddr(port)) - return *(volatile unsigned short *)pci_ioaddr(port); else if (port >= 0x2000) return *port2adr(port); else @@ -71,8 +65,6 @@ unsigned int sh7751se_inl(unsigned long port) { if (PXSEG(port)) return *(volatile unsigned long *)port; - else if (is_pci_ioaddr(port)) - return *(volatile unsigned int *)pci_ioaddr(port); else if (port >= 0x2000) return *port2adr(port); else @@ -85,8 +77,6 @@ void sh7751se_outb(unsigned char value, unsigned long port) if (PXSEG(port)) *(volatile unsigned char *)port = value; - else if (is_pci_ioaddr(port)) - *((unsigned char*)pci_ioaddr(port)) = value; else *(port2adr(port)) = value; } @@ -95,8 +85,6 @@ void sh7751se_outb_p(unsigned char value, unsigned long port) { if (PXSEG(port)) *(volatile unsigned char *)port = value; - else if (is_pci_ioaddr(port)) - *((unsigned char*)pci_ioaddr(port)) = value; else *(port2adr(port)) = value; ctrl_delay(); @@ -106,8 +94,6 @@ void sh7751se_outw(unsigned short value, unsigned long port) { if (PXSEG(port)) *(volatile unsigned short *)port = value; - else if (is_pci_ioaddr(port)) - *((unsigned short *)pci_ioaddr(port)) = value; else if (port >= 0x2000) *port2adr(port) = value; else @@ -118,8 +104,6 @@ void sh7751se_outl(unsigned int value, unsigned long port) { if (PXSEG(port)) *(volatile unsigned long *)port = value; - else if (is_pci_ioaddr(port)) - *((unsigned long*)pci_ioaddr(port)) = value; else maybebadio(port); } diff --git a/arch/sh/boards/mach-snapgear/io.c b/arch/sh/boards/mach-snapgear/io.c index 0f48242..476650e 100644 --- a/arch/sh/boards/mach-snapgear/io.c +++ b/arch/sh/boards/mach-snapgear/io.c @@ -36,8 +36,6 @@ unsigned char snapgear_inb(unsigned long port) { if (PXSEG(port)) return *(volatile unsigned char *)port; - else if (is_pci_ioaddr(port)) - return *(volatile unsigned char *)pci_ioaddr(port); else return (*port2adr(port)) & 0xff; } @@ -48,8 +46,6 @@ unsigned char snapgear_inb_p(unsigned long port) if (PXSEG(port)) v = *(volatile unsigned char *)port; - else if (is_pci_ioaddr(port)) - v = *(volatile unsigned char *)pci_ioaddr(port); else v = (*port2adr(port))&0xff; ctrl_delay(); @@ -60,8 +56,6 @@ unsigned short snapgear_inw(unsigned long port) { if (PXSEG(port)) return *(volatile unsigned short *)port; - else if (is_pci_ioaddr(port)) - return *(volatile unsigned short *)pci_ioaddr(port); else if (port >= 0x2000) return *port2adr(port); else @@ -73,8 +67,6 @@ unsigned int snapgear_inl(unsigned long port) { if (PXSEG(port)) return *(volatile unsigned long *)port; - else if (is_pci_ioaddr(port)) - return *(volatile unsigned int *)pci_ioaddr(port); else if (port >= 0x2000) return *port2adr(port); else @@ -87,8 +79,6 @@ void snapgear_outb(unsigned char value, unsigned long port) if (PXSEG(port)) *(volatile unsigned char *)port = value; - else if (is_pci_ioaddr(port)) - *((unsigned char*)pci_ioaddr(port)) = value; else *(port2adr(port)) = value; } @@ -97,8 +87,6 @@ void snapgear_outb_p(unsigned char value, unsigned long port) { if (PXSEG(port)) *(volatile unsigned char *)port = value; - else if (is_pci_ioaddr(port)) - *((unsigned char*)pci_ioaddr(port)) = value; else *(port2adr(port)) = value; ctrl_delay(); @@ -108,8 +96,6 @@ void snapgear_outw(unsigned short value, unsigned long port) { if (PXSEG(port)) *(volatile unsigned short *)port = value; - else if (is_pci_ioaddr(port)) - *((unsigned short *)pci_ioaddr(port)) = value; else if (port >= 0x2000) *port2adr(port) = value; else @@ -120,8 +106,6 @@ void snapgear_outl(unsigned int value, unsigned long port) { if (PXSEG(port)) *(volatile unsigned long *)port = value; - else if (is_pci_ioaddr(port)) - *((unsigned long*)pci_ioaddr(port)) = value; else maybebadio(port); } diff --git a/arch/sh/boards/mach-systemh/io.c b/arch/sh/boards/mach-systemh/io.c index dec3db0..15577ff 100644 --- a/arch/sh/boards/mach-systemh/io.c +++ b/arch/sh/boards/mach-systemh/io.c @@ -35,8 +35,6 @@ unsigned char sh7751systemh_inb(unsigned long port) { if (PXSEG(port)) return *(volatile unsigned char *)port; - else if (is_pci_ioaddr(port)) - return *(volatile unsigned char *)pci_ioaddr(port); else if (port <= 0x3F1) return *(volatile unsigned char *)ETHER_IOMAP(port); else @@ -49,8 +47,6 @@ unsigned char sh7751systemh_inb_p(unsigned long port) if (PXSEG(port)) v = *(volatile unsigned char *)port; - else if (is_pci_ioaddr(port)) - v = *(volatile unsigned char *)pci_ioaddr(port); else if (port <= 0x3F1) v = *(volatile unsigned char *)ETHER_IOMAP(port); else @@ -63,8 +59,6 @@ unsigned short sh7751systemh_inw(unsigned long port) { if (PXSEG(port)) return *(volatile unsigned short *)port; - else if (is_pci_ioaddr(port)) - return *(volatile unsigned short *)pci_ioaddr(port); else if (port >= 0x2000) return *port2adr(port); else if (port <= 0x3F1) @@ -78,8 +72,6 @@ unsigned int sh7751systemh_inl(unsigned long port) { if (PXSEG(port)) return *(volatile unsigned long *)port; - else if (is_pci_ioaddr(port)) - return *(volatile unsigned int *)pci_ioaddr(port); else if (port >= 0x2000) return *port2adr(port); else if (port <= 0x3F1) @@ -94,8 +86,6 @@ void sh7751systemh_outb(unsigned char value, unsigned long port) if (PXSEG(port)) *(volatile unsigned char *)port = value; - else if (is_pci_ioaddr(port)) - *((unsigned char*)pci_ioaddr(port)) = value; else if (port <= 0x3F1) *(volatile unsigned char *)ETHER_IOMAP(port) = value; else @@ -106,8 +96,6 @@ void sh7751systemh_outb_p(unsigned char value, unsigned long port) { if (PXSEG(port)) *(volatile unsigned char *)port = value; - else if (is_pci_ioaddr(port)) - *((unsigned char*)pci_ioaddr(port)) = value; else if (port <= 0x3F1) *(volatile unsigned char *)ETHER_IOMAP(port) = value; else @@ -119,8 +107,6 @@ void sh7751systemh_outw(unsigned short value, unsigned long port) { if (PXSEG(port)) *(volatile unsigned short *)port = value; - else if (is_pci_ioaddr(port)) - *((unsigned short *)pci_ioaddr(port)) = value; else if (port >= 0x2000) *port2adr(port) = value; else if (port <= 0x3F1) @@ -133,8 +119,6 @@ void sh7751systemh_outl(unsigned int value, unsigned long port) { if (PXSEG(port)) *(volatile unsigned long *)port = value; - else if (is_pci_ioaddr(port)) - *((unsigned long*)pci_ioaddr(port)) = value; else maybebadio(port); } diff --git a/arch/sh/boards/mach-titan/io.c b/arch/sh/boards/mach-titan/io.c index 053b3ed..0130e98 100644 --- a/arch/sh/boards/mach-titan/io.c +++ b/arch/sh/boards/mach-titan/io.c @@ -17,8 +17,6 @@ u8 titan_inb(unsigned long port) { if (PXSEG(port)) return ctrl_inb(port); - else if (is_pci_ioaddr(port)) - return ctrl_inb(pci_ioaddr(port)); return ctrl_inw(port2adr(port)) & 0xff; } @@ -28,8 +26,6 @@ u8 titan_inb_p(unsigned long port) if (PXSEG(port)) v = ctrl_inb(port); - else if (is_pci_ioaddr(port)) - v = ctrl_inb(pci_ioaddr(port)); else v = ctrl_inw(port2adr(port)) & 0xff; ctrl_delay(); @@ -40,8 +36,6 @@ u16 titan_inw(unsigned long port) { if (PXSEG(port)) return ctrl_inw(port); - else if (is_pci_ioaddr(port)) - return ctrl_inw(pci_ioaddr(port)); else if (port >= 0x2000) return ctrl_inw(port2adr(port)); else @@ -53,8 +47,6 @@ u32 titan_inl(unsigned long port) { if (PXSEG(port)) return ctrl_inl(port); - else if (is_pci_ioaddr(port)) - return ctrl_inl(pci_ioaddr(port)); else if (port >= 0x2000) return ctrl_inw(port2adr(port)); else @@ -66,8 +58,6 @@ void titan_outb(u8 value, unsigned long port) { if (PXSEG(port)) ctrl_outb(value, port); - else if (is_pci_ioaddr(port)) - ctrl_outb(value, pci_ioaddr(port)); else ctrl_outw(value, port2adr(port)); } @@ -76,8 +66,6 @@ void titan_outb_p(u8 value, unsigned long port) { if (PXSEG(port)) ctrl_outb(value, port); - else if (is_pci_ioaddr(port)) - ctrl_outb(value, pci_ioaddr(port)); else ctrl_outw(value, port2adr(port)); ctrl_delay(); @@ -87,8 +75,6 @@ void titan_outw(u16 value, unsigned long port) { if (PXSEG(port)) ctrl_outw(value, port); - else if (is_pci_ioaddr(port)) - ctrl_outw(value, pci_ioaddr(port)); else if (port >= 0x2000) ctrl_outw(value, port2adr(port)); else @@ -99,8 +85,6 @@ void titan_outl(u32 value, unsigned long port) { if (PXSEG(port)) ctrl_outl(value, port); - else if (is_pci_ioaddr(port)) - ctrl_outl(value, pci_ioaddr(port)); else maybebadio(port); } @@ -119,8 +103,6 @@ void __iomem *titan_ioport_map(unsigned long port, unsigned int size) { if (PXSEG(port)) return (void __iomem *)port; - else if (is_pci_ioaddr(port)) - return (void __iomem *)pci_ioaddr(port); return (void __iomem *)port2adr(port); } -- cgit v0.10.2 From 0e75148108914062cb46ad3dc8f054a628018df7 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Mon, 20 Apr 2009 19:48:48 +0900 Subject: sh: pci: Consolidate pcibios_setup() in pci-lib. This wasn't really being used for anything useful, so just stub it in pci-lib. Signed-off-by: Paul Mundt diff --git a/arch/sh/drivers/pci/ops-dreamcast.c b/arch/sh/drivers/pci/ops-dreamcast.c index 5bc81d5..529aa4f 100644 --- a/arch/sh/drivers/pci/ops-dreamcast.c +++ b/arch/sh/drivers/pci/ops-dreamcast.c @@ -154,12 +154,6 @@ static int __init gapspci_init(struct pci_channel *chan) return 0; } -/* Haven't done anything here as yet */ -char * __devinit pcibios_setup(char *str) -{ - return str; -} - struct pci_channel board_pci_channels[] = { { gapspci_init, &gapspci_pci_ops, &gapspci_io_resource, &gapspci_mem_resource, 0, 1 }, diff --git a/arch/sh/drivers/pci/ops-sh4.c b/arch/sh/drivers/pci/ops-sh4.c index 2a7f7b5..7cc1fcc 100644 --- a/arch/sh/drivers/pci/ops-sh4.c +++ b/arch/sh/drivers/pci/ops-sh4.c @@ -106,30 +106,27 @@ struct pci_ops sh4_pci_ops = { * Not really related to pci_ops, but it's common and not worth shoving * somewhere else for now.. */ -static unsigned int pci_probe = PCI_PROBE_CONF1; - int __init sh4_pci_check_direct(struct pci_channel *chan) { /* * Check if configuration works. */ - if (pci_probe & PCI_PROBE_CONF1) { - unsigned int tmp = pci_read_reg(chan, SH4_PCIPAR); - - pci_write_reg(chan, P1SEG, SH4_PCIPAR); + unsigned int tmp = pci_read_reg(chan, SH4_PCIPAR); - if (pci_read_reg(chan, SH4_PCIPAR) == P1SEG) { - pci_write_reg(chan, tmp, SH4_PCIPAR); - printk(KERN_INFO "PCI: Using configuration type 1\n"); - request_region(chan->reg_base + SH4_PCIPAR, 8, - "PCI conf1"); - return 0; - } + pci_write_reg(chan, P1SEG, SH4_PCIPAR); + if (pci_read_reg(chan, SH4_PCIPAR) == P1SEG) { pci_write_reg(chan, tmp, SH4_PCIPAR); + printk(KERN_INFO "PCI: Using configuration type 1\n"); + request_region(chan->reg_base + SH4_PCIPAR, 8, + "PCI conf1"); + return 0; } - pr_debug("PCI: pci_check_direct failed\n"); + pci_write_reg(chan, tmp, SH4_PCIPAR); + + printk(KERN_ERR "PCI: %s failed\n", __func__); + return -EINVAL; } @@ -155,16 +152,6 @@ static void __init pci_fixup_ide_bases(struct pci_dev *d) } DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, pci_fixup_ide_bases); -char * __devinit pcibios_setup(char *str) -{ - if (!strcmp(str, "off")) { - pci_probe = 0; - return NULL; - } - - return str; -} - int __attribute__((weak)) pci_fixup_pcic(struct pci_channel *chan) { /* Nothing to do. */ diff --git a/arch/sh/drivers/pci/ops-sh5.c b/arch/sh/drivers/pci/ops-sh5.c index 729e38a..b10e2d5 100644 --- a/arch/sh/drivers/pci/ops-sh5.c +++ b/arch/sh/drivers/pci/ops-sh5.c @@ -42,11 +42,6 @@ static void __init pci_fixup_ide_bases(struct pci_dev *d) } DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, pci_fixup_ide_bases); -char * __devinit pcibios_setup(char *str) -{ - return str; -} - static int sh5pci_read(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 *val) { diff --git a/arch/sh/drivers/pci/pci-lib.c b/arch/sh/drivers/pci/pci-lib.c index ea83629..f072aca 100644 --- a/arch/sh/drivers/pci/pci-lib.c +++ b/arch/sh/drivers/pci/pci-lib.c @@ -134,6 +134,11 @@ void __init pcibios_update_irq(struct pci_dev *dev, int irq) pci_write_config_byte(dev, PCI_INTERRUPT_LINE, irq); } +char * __devinit pcibios_setup(char *str) +{ + return str; +} + int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma, enum pci_mmap_state mmap_state, int write_combine) { -- cgit v0.10.2 From 0db38cea69fc478a5c25b3c915ec680cc5538783 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Mon, 20 Apr 2009 19:54:47 +0900 Subject: sh: pci: Kill off legacy ide quirks. These fixups seem to have bitrotted a bit since their introduction in the 2.4 days. As we never had much use for them in the first place, and nothing is using them any more, kill them off the rest of the way. Signed-off-by: Paul Mundt diff --git a/arch/sh/drivers/pci/ops-sh4.c b/arch/sh/drivers/pci/ops-sh4.c index 7cc1fcc..78bebeb 100644 --- a/arch/sh/drivers/pci/ops-sh4.c +++ b/arch/sh/drivers/pci/ops-sh4.c @@ -130,28 +130,6 @@ int __init sh4_pci_check_direct(struct pci_channel *chan) return -EINVAL; } -/* Handle generic fixups */ -static void __init pci_fixup_ide_bases(struct pci_dev *d) -{ - int i; - - /* - * PCI IDE controllers use non-standard I/O port decoding, respect it. - */ - if ((d->class >> 8) != PCI_CLASS_STORAGE_IDE) - return; - pr_debug("PCI: IDE base address fixup for %s\n", pci_name(d)); - for(i = 0; i < 4; i++) { - struct resource *r = &d->resource[i]; - - if ((r->start & ~0x80) == 0x374) { - r->start |= 2; - r->end = r->start; - } - } -} -DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, pci_fixup_ide_bases); - int __attribute__((weak)) pci_fixup_pcic(struct pci_channel *chan) { /* Nothing to do. */ diff --git a/arch/sh/drivers/pci/ops-sh5.c b/arch/sh/drivers/pci/ops-sh5.c index b10e2d5..4ce95a0 100644 --- a/arch/sh/drivers/pci/ops-sh5.c +++ b/arch/sh/drivers/pci/ops-sh5.c @@ -22,26 +22,6 @@ #include #include "pci-sh5.h" -static void __init pci_fixup_ide_bases(struct pci_dev *d) -{ - int i; - - /* - * PCI IDE controllers use non-standard I/O port decoding, respect it. - */ - if ((d->class >> 8) != PCI_CLASS_STORAGE_IDE) - return; - printk("PCI: IDE base address fixup for %s\n", pci_name(d)); - for(i=0; i<4; i++) { - struct resource *r = &d->resource[i]; - if ((r->start & ~0x80) == 0x374) { - r->start |= 2; - r->end = r->start; - } - } -} -DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, pci_fixup_ide_bases); - static int sh5pci_read(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 *val) { -- cgit v0.10.2 From 3444f5ec49bc6cb901ffea38e085db1d76e1189c Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Mon, 20 Apr 2009 20:22:05 +0900 Subject: sh: pci: Tidy up the dreamcast PCI support. Signed-off-by: Paul Mundt diff --git a/arch/sh/drivers/pci/Makefile b/arch/sh/drivers/pci/Makefile index 4cac866..2160a06 100644 --- a/arch/sh/drivers/pci/Makefile +++ b/arch/sh/drivers/pci/Makefile @@ -12,7 +12,8 @@ obj-$(CONFIG_CPU_SUBTYPE_SH7780) += pci-sh7780.o ops-sh4.o obj-$(CONFIG_CPU_SUBTYPE_SH7785) += pci-sh7780.o ops-sh4.o obj-$(CONFIG_CPU_SH5) += pci-sh5.o ops-sh5.o -obj-$(CONFIG_SH_DREAMCAST) += ops-dreamcast.o fixups-dreamcast.o +obj-$(CONFIG_SH_DREAMCAST) += ops-dreamcast.o fixups-dreamcast.o \ + pci-dreamcast.o obj-$(CONFIG_SH_SECUREEDGE5410) += ops-snapgear.o obj-$(CONFIG_SH_RTS7751R2D) += ops-rts7751r2d.o fixups-rts7751r2d.o obj-$(CONFIG_SH_SH03) += ops-sh03.o fixups-sh03.o diff --git a/arch/sh/drivers/pci/ops-dreamcast.c b/arch/sh/drivers/pci/ops-dreamcast.c index 529aa4f..e83d0d3 100644 --- a/arch/sh/drivers/pci/ops-dreamcast.c +++ b/arch/sh/drivers/pci/ops-dreamcast.c @@ -1,15 +1,9 @@ /* - * arch/sh/drivers/pci/ops-dreamcast.c - * * PCI operations for the Sega Dreamcast * * Copyright (C) 2001, 2002 M. R. Brown * Copyright (C) 2002, 2003 Paul Mundt * - * This file originally bore the message (with enclosed-$): - * Id: pci.c,v 1.3 2003/05/04 19:29:46 lethal Exp - * Dreamcast PCI: Supports SEGA Broadband Adaptor only. - * * This file is subject to the terms and conditions of the GNU General Public * License. See the file "COPYING" in the main directory of this archive * for more details. @@ -23,25 +17,10 @@ #include #include #include - -#include -#include +#include +#include #include -static struct resource gapspci_io_resource = { - .name = "GAPSPCI IO", - .start = GAPSPCI_BBA_CONFIG, - .end = GAPSPCI_BBA_CONFIG + GAPSPCI_BBA_CONFIG_SIZE - 1, - .flags = IORESOURCE_IO, -}; - -static struct resource gapspci_mem_resource = { - .name = "GAPSPCI mem", - .start = GAPSPCI_DMA_BASE, - .end = GAPSPCI_DMA_BASE + GAPSPCI_DMA_SIZE - 1, - .flags = IORESOURCE_MEM, -}; - /* * The !gapspci_config_access case really shouldn't happen, ever, unless * someone implicitly messes around with the last devfn value.. otherwise we @@ -76,10 +55,10 @@ static int gapspci_read(struct pci_bus *bus, unsigned int devfn, int where, int return PCIBIOS_DEVICE_NOT_FOUND; switch (size) { - case 1: *val = inb(GAPSPCI_BBA_CONFIG+where); break; - case 2: *val = inw(GAPSPCI_BBA_CONFIG+where); break; - case 4: *val = inl(GAPSPCI_BBA_CONFIG+where); break; - } + case 1: *val = inb(GAPSPCI_BBA_CONFIG+where); break; + case 2: *val = inw(GAPSPCI_BBA_CONFIG+where); break; + case 4: *val = inl(GAPSPCI_BBA_CONFIG+where); break; + } return PCIBIOS_SUCCESSFUL; } @@ -90,72 +69,15 @@ static int gapspci_write(struct pci_bus *bus, unsigned int devfn, int where, int return PCIBIOS_DEVICE_NOT_FOUND; switch (size) { - case 1: outb(( u8)val, GAPSPCI_BBA_CONFIG+where); break; - case 2: outw((u16)val, GAPSPCI_BBA_CONFIG+where); break; - case 4: outl((u32)val, GAPSPCI_BBA_CONFIG+where); break; + case 1: outb(( u8)val, GAPSPCI_BBA_CONFIG+where); break; + case 2: outw((u16)val, GAPSPCI_BBA_CONFIG+where); break; + case 4: outl((u32)val, GAPSPCI_BBA_CONFIG+where); break; } return PCIBIOS_SUCCESSFUL; } -static struct pci_ops gapspci_pci_ops = { +struct pci_ops gapspci_pci_ops = { .read = gapspci_read, .write = gapspci_write, }; - -/* - * gapspci init - */ - -static int __init gapspci_init(struct pci_channel *chan) -{ - char idbuf[16]; - int i; - - /* - * FIXME: All of this wants documenting to some degree, - * even some basic register definitions would be nice. - * - * I haven't seen anything this ugly since.. maple. - */ - - for (i=0; i<16; i++) - idbuf[i] = inb(GAPSPCI_REGS+i); - - if (strncmp(idbuf, "GAPSPCI_BRIDGE_2", 16)) - return -ENODEV; - - outl(0x5a14a501, GAPSPCI_REGS+0x18); - - for (i=0; i<1000000; i++) - ; - - if (inl(GAPSPCI_REGS+0x18) != 1) - return -EINVAL; - - outl(0x01000000, GAPSPCI_REGS+0x20); - outl(0x01000000, GAPSPCI_REGS+0x24); - - outl(GAPSPCI_DMA_BASE, GAPSPCI_REGS+0x28); - outl(GAPSPCI_DMA_BASE+GAPSPCI_DMA_SIZE, GAPSPCI_REGS+0x2c); - - outl(1, GAPSPCI_REGS+0x14); - outl(1, GAPSPCI_REGS+0x34); - - /* Setting Broadband Adapter */ - outw(0xf900, GAPSPCI_BBA_CONFIG+0x06); - outl(0x00000000, GAPSPCI_BBA_CONFIG+0x30); - outb(0x00, GAPSPCI_BBA_CONFIG+0x3c); - outb(0xf0, GAPSPCI_BBA_CONFIG+0x0d); - outw(0x0006, GAPSPCI_BBA_CONFIG+0x04); - outl(0x00002001, GAPSPCI_BBA_CONFIG+0x10); - outl(0x01000000, GAPSPCI_BBA_CONFIG+0x14); - - return 0; -} - -struct pci_channel board_pci_channels[] = { - { gapspci_init, &gapspci_pci_ops, &gapspci_io_resource, - &gapspci_mem_resource, 0, 1 }, - { 0, } -}; diff --git a/arch/sh/drivers/pci/pci-dreamcast.c b/arch/sh/drivers/pci/pci-dreamcast.c new file mode 100644 index 0000000..0897be5 --- /dev/null +++ b/arch/sh/drivers/pci/pci-dreamcast.c @@ -0,0 +1,105 @@ +/* + * PCI support for the Sega Dreamcast + * + * Copyright (C) 2001, 2002 M. R. Brown + * Copyright (C) 2002, 2003 Paul Mundt + * + * This file originally bore the message (with enclosed-$): + * Id: pci.c,v 1.3 2003/05/04 19:29:46 lethal Exp + * Dreamcast PCI: Supports SEGA Broadband Adaptor only. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +static struct resource gapspci_io_resource = { + .name = "GAPSPCI IO", + .start = GAPSPCI_BBA_CONFIG, + .end = GAPSPCI_BBA_CONFIG + GAPSPCI_BBA_CONFIG_SIZE - 1, + .flags = IORESOURCE_IO, +}; + +static struct resource gapspci_mem_resource = { + .name = "GAPSPCI mem", + .start = GAPSPCI_DMA_BASE, + .end = GAPSPCI_DMA_BASE + GAPSPCI_DMA_SIZE - 1, + .flags = IORESOURCE_MEM, +}; + +/* + * gapspci init + */ + +static int __init gapspci_init(struct pci_channel *chan) +{ + char idbuf[16]; + int i; + + /* + * FIXME: All of this wants documenting to some degree, + * even some basic register definitions would be nice. + * + * I haven't seen anything this ugly since.. maple. + */ + + for (i=0; i<16; i++) + idbuf[i] = inb(GAPSPCI_REGS+i); + + if (strncmp(idbuf, "GAPSPCI_BRIDGE_2", 16)) + return -ENODEV; + + outl(0x5a14a501, GAPSPCI_REGS+0x18); + + for (i=0; i<1000000; i++) + cpu_relax(); + + if (inl(GAPSPCI_REGS+0x18) != 1) + return -EINVAL; + + outl(0x01000000, GAPSPCI_REGS+0x20); + outl(0x01000000, GAPSPCI_REGS+0x24); + + outl(GAPSPCI_DMA_BASE, GAPSPCI_REGS+0x28); + outl(GAPSPCI_DMA_BASE+GAPSPCI_DMA_SIZE, GAPSPCI_REGS+0x2c); + + outl(1, GAPSPCI_REGS+0x14); + outl(1, GAPSPCI_REGS+0x34); + + /* Setting Broadband Adapter */ + outw(0xf900, GAPSPCI_BBA_CONFIG+0x06); + outl(0x00000000, GAPSPCI_BBA_CONFIG+0x30); + outb(0x00, GAPSPCI_BBA_CONFIG+0x3c); + outb(0xf0, GAPSPCI_BBA_CONFIG+0x0d); + outw(0x0006, GAPSPCI_BBA_CONFIG+0x04); + outl(0x00002001, GAPSPCI_BBA_CONFIG+0x10); + outl(0x01000000, GAPSPCI_BBA_CONFIG+0x14); + + return 0; +} + +struct pci_channel board_pci_channels[] = { + { + .init = gapspci_init, + .pci_ops = &gapspci_pci_ops, + .io_resource = &gapspci_io_resource, + .mem_resource = &gapspci_mem_resource, + .first_devfn = 0, + .last_devfn = 1, + }, { + .init = NULL, + } +}; diff --git a/arch/sh/include/mach-dreamcast/mach/pci.h b/arch/sh/include/mach-dreamcast/mach/pci.h index 75fc900..0314d97 100644 --- a/arch/sh/include/mach-dreamcast/mach/pci.h +++ b/arch/sh/include/mach-dreamcast/mach/pci.h @@ -21,5 +21,7 @@ #define GAPSPCI_IRQ HW_EVENT_EXTERNAL +extern struct pci_ops gapspci_pci_ops; + #endif /* __ASM_SH_DREAMCAST_PCI_H */ -- cgit v0.10.2 From 48e4237d96fdcb1237b63bcddb37771f97452eec Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Mon, 20 Apr 2009 20:40:48 +0900 Subject: sh: pci: Convert the SH-5 code over to the new interface. Signed-off-by: Paul Mundt diff --git a/arch/sh/drivers/pci/Kconfig b/arch/sh/drivers/pci/Kconfig index efe8cf9..f9fb1d1 100644 --- a/arch/sh/drivers/pci/Kconfig +++ b/arch/sh/drivers/pci/Kconfig @@ -23,7 +23,7 @@ config PCI_NEW bool depends on PCI default y if CPU_SUBTYPE_SH7763 || CPU_SUBTYPE_SH7780 || \ - CPU_SUBTYPE_SH7785 + CPU_SUBTYPE_SH7785 || CPU_SH5 # This is also board-specific config PCI_AUTO diff --git a/arch/sh/drivers/pci/ops-cayman.c b/arch/sh/drivers/pci/ops-cayman.c index cbaaf02..b68b61d 100644 --- a/arch/sh/drivers/pci/ops-cayman.c +++ b/arch/sh/drivers/pci/ops-cayman.c @@ -75,14 +75,3 @@ int __init pcibios_map_platform_irq(struct pci_dev *dev, u8 slot, u8 pin) return result; } - -struct pci_channel board_pci_channels[] = { - { sh5_pci_init, &sh5_pci_ops, NULL, NULL, 0, 0xff }, - { NULL, NULL, NULL, 0, 0 }, -}; - -int __init pcibios_init_platform(void) -{ - return sh5pci_init(__pa(memory_start), - __pa(memory_end) - __pa(memory_start)); -} diff --git a/arch/sh/drivers/pci/pci-sh5.c b/arch/sh/drivers/pci/pci-sh5.c index 7750da2..cf43185 100644 --- a/arch/sh/drivers/pci/pci-sh5.c +++ b/arch/sh/drivers/pci/pci-sh5.c @@ -27,12 +27,6 @@ unsigned long pcicr_virt; unsigned long PCI_IO_AREA; -int __init sh5_pci_init(struct pci_channel *chan) -{ - pr_debug("PCI: Starting intialization.\n"); - return pcibios_init_platform(); -} - /* Rounds a number UP to the nearest power of two. Used for * sizing the PCI window. */ @@ -95,8 +89,21 @@ static irqreturn_t pcish5_serr_irq(int irq, void *dev_id) return IRQ_NONE; } -int __init sh5pci_init(unsigned long memStart, unsigned long memSize) +static struct resource sh5_io_resource = { /* place holder */ }; +static struct resource sh5_mem_resource = { /* place holder */ }; + +static struct pci_channel sh5pci_controller = { + .pci_ops = &sh5_pci_ops, + .mem_resource = &sh5_mem_resource, + .mem_offset = 0x00000000, + .io_resource = &sh5_io_resource, + .io_offset = 0x00000000, +}; + +static int __init sh5pci_init(void) { + unsigned long memStart = __pa(memory_start); + unsigned long memSize = __pa(memory_end) - memStart; u32 lsr0; u32 uval; @@ -203,35 +210,14 @@ int __init sh5pci_init(unsigned long memStart, unsigned long memSize) SH5PCI_WRITE(AINTM, ~0); SH5PCI_WRITE(PINTM, ~0); - return 0; -} + sh5_io_resource.start = PCI_IO_AREA; + sh5_io_resource.end = PCI_IO_AREA + 0x10000; -#define xPCIBIOS_MIN_IO board_pci_channels->io_resource->start -#define xPCIBIOS_MIN_MEM board_pci_channels->mem_resource->start + sh5_mem_resource.start = memStart; + sh5_mem_resource.end = memStart + memSize; -void __devinit pcibios_fixup_bus(struct pci_bus *bus) -{ - struct pci_dev *dev = bus->self; - int i; - - if (dev) { - for (i= 0; i < 3; i++) { - bus->resource[i] = - &dev->resource[PCI_BRIDGE_RESOURCES+i]; - bus->resource[i]->name = bus->name; - } - bus->resource[0]->flags |= IORESOURCE_IO; - bus->resource[1]->flags |= IORESOURCE_MEM; - - /* For now, propagate host limits to the bus; - * we'll adjust them later. */ - bus->resource[0]->end = 64*1024 - 1 ; - bus->resource[1]->end = xPCIBIOS_MIN_MEM+(256*1024*1024)-1; - bus->resource[0]->start = xPCIBIOS_MIN_IO; - bus->resource[1]->start = xPCIBIOS_MIN_MEM; - - /* Turn off downstream PF memory address range by default */ - bus->resource[2]->start = 1024*1024; - bus->resource[2]->end = bus->resource[2]->start - 1; - } + register_pci_controller(&sh5pci_controller); + + return 0; } +arch_initcall(sh5pci_init); diff --git a/arch/sh/drivers/pci/pci-sh5.h b/arch/sh/drivers/pci/pci-sh5.h index af09f38..f277628 100644 --- a/arch/sh/drivers/pci/pci-sh5.h +++ b/arch/sh/drivers/pci/pci-sh5.h @@ -107,8 +107,4 @@ extern unsigned long pcicr_virt; extern struct pci_ops sh5_pci_ops; -/* arch/sh/drivers/pci/pci-sh5.c */ -int sh5_pci_init(struct pci_channel *chan); -int sh5pci_init(unsigned long memStart, unsigned long memSize); - #endif /* __PCI_SH5_H */ -- cgit v0.10.2 From a5b08047129f214af1899bd9088605c7adc21ed5 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Mon, 20 Apr 2009 20:41:45 +0900 Subject: sh: pci: Rename ops-cayman -> fixups-cayman. Now that ops-cayman.c only contains IRQ routing fixups, rename it. Signed-off-by: Paul Mundt diff --git a/arch/sh/drivers/pci/Makefile b/arch/sh/drivers/pci/Makefile index 2160a06..cb2190c 100644 --- a/arch/sh/drivers/pci/Makefile +++ b/arch/sh/drivers/pci/Makefile @@ -24,4 +24,4 @@ obj-$(CONFIG_SH_7780_SOLUTION_ENGINE) += fixups-sdk7780.o obj-$(CONFIG_SH_TITAN) += ops-titan.o obj-$(CONFIG_SH_LANDISK) += ops-landisk.o obj-$(CONFIG_SH_LBOX_RE2) += ops-lboxre2.o fixups-rts7751r2d.o -obj-$(CONFIG_SH_CAYMAN) += ops-cayman.o +obj-$(CONFIG_SH_CAYMAN) += fixups-cayman.o diff --git a/arch/sh/drivers/pci/fixups-cayman.c b/arch/sh/drivers/pci/fixups-cayman.c new file mode 100644 index 0000000..b68b61d --- /dev/null +++ b/arch/sh/drivers/pci/fixups-cayman.c @@ -0,0 +1,77 @@ +#include +#include +#include +#include +#include +#include "pci-sh5.h" + +int __init pcibios_map_platform_irq(struct pci_dev *dev, u8 slot, u8 pin) +{ + int result = -1; + + /* The complication here is that the PCI IRQ lines from the Cayman's 2 + 5V slots get into the CPU via a different path from the IRQ lines + from the 3 3.3V slots. Thus, we have to detect whether the card's + interrupts go via the 5V or 3.3V path, i.e. the 'bridge swizzling' + at the point where we cross from 5V to 3.3V is not the normal case. + + The added complication is that we don't know that the 5V slots are + always bus 2, because a card containing a PCI-PCI bridge may be + plugged into a 3.3V slot, and this changes the bus numbering. + + Also, the Cayman has an intermediate PCI bus that goes a custom + expansion board header (and to the secondary bridge). This bus has + never been used in practice. + + The 1ary onboard PCI-PCI bridge is device 3 on bus 0 + The 2ary onboard PCI-PCI bridge is device 0 on the 2ary bus of + the 1ary bridge. + */ + + struct slot_pin { + int slot; + int pin; + } path[4]; + int i=0; + + while (dev->bus->number > 0) { + + slot = path[i].slot = PCI_SLOT(dev->devfn); + pin = path[i].pin = pci_swizzle_interrupt_pin(dev, pin); + dev = dev->bus->self; + i++; + if (i > 3) panic("PCI path to root bus too long!\n"); + } + + slot = PCI_SLOT(dev->devfn); + /* This is the slot on bus 0 through which the device is eventually + reachable. */ + + /* Now work back up. */ + if ((slot < 3) || (i == 0)) { + /* Bus 0 (incl. PCI-PCI bridge itself) : perform the final + swizzle now. */ + result = IRQ_INTA + pci_swizzle_interrupt_pin(dev, pin) - 1; + } else { + i--; + slot = path[i].slot; + pin = path[i].pin; + if (slot > 0) { + panic("PCI expansion bus device found - not handled!\n"); + } else { + if (i > 0) { + /* 5V slots */ + i--; + slot = path[i].slot; + pin = path[i].pin; + /* 'pin' was swizzled earlier wrt slot, don't do it again. */ + result = IRQ_P2INTA + (pin - 1); + } else { + /* IRQ for 2ary PCI-PCI bridge : unused */ + result = -1; + } + } + } + + return result; +} diff --git a/arch/sh/drivers/pci/ops-cayman.c b/arch/sh/drivers/pci/ops-cayman.c deleted file mode 100644 index b68b61d..0000000 --- a/arch/sh/drivers/pci/ops-cayman.c +++ /dev/null @@ -1,77 +0,0 @@ -#include -#include -#include -#include -#include -#include "pci-sh5.h" - -int __init pcibios_map_platform_irq(struct pci_dev *dev, u8 slot, u8 pin) -{ - int result = -1; - - /* The complication here is that the PCI IRQ lines from the Cayman's 2 - 5V slots get into the CPU via a different path from the IRQ lines - from the 3 3.3V slots. Thus, we have to detect whether the card's - interrupts go via the 5V or 3.3V path, i.e. the 'bridge swizzling' - at the point where we cross from 5V to 3.3V is not the normal case. - - The added complication is that we don't know that the 5V slots are - always bus 2, because a card containing a PCI-PCI bridge may be - plugged into a 3.3V slot, and this changes the bus numbering. - - Also, the Cayman has an intermediate PCI bus that goes a custom - expansion board header (and to the secondary bridge). This bus has - never been used in practice. - - The 1ary onboard PCI-PCI bridge is device 3 on bus 0 - The 2ary onboard PCI-PCI bridge is device 0 on the 2ary bus of - the 1ary bridge. - */ - - struct slot_pin { - int slot; - int pin; - } path[4]; - int i=0; - - while (dev->bus->number > 0) { - - slot = path[i].slot = PCI_SLOT(dev->devfn); - pin = path[i].pin = pci_swizzle_interrupt_pin(dev, pin); - dev = dev->bus->self; - i++; - if (i > 3) panic("PCI path to root bus too long!\n"); - } - - slot = PCI_SLOT(dev->devfn); - /* This is the slot on bus 0 through which the device is eventually - reachable. */ - - /* Now work back up. */ - if ((slot < 3) || (i == 0)) { - /* Bus 0 (incl. PCI-PCI bridge itself) : perform the final - swizzle now. */ - result = IRQ_INTA + pci_swizzle_interrupt_pin(dev, pin) - 1; - } else { - i--; - slot = path[i].slot; - pin = path[i].pin; - if (slot > 0) { - panic("PCI expansion bus device found - not handled!\n"); - } else { - if (i > 0) { - /* 5V slots */ - i--; - slot = path[i].slot; - pin = path[i].pin; - /* 'pin' was swizzled earlier wrt slot, don't do it again. */ - result = IRQ_P2INTA + (pin - 1); - } else { - /* IRQ for 2ary PCI-PCI bridge : unused */ - result = -1; - } - } - } - - return result; -} -- cgit v0.10.2 From 757e3c16f8bafa2a470aebf9b04671c5d4d18f49 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Mon, 20 Apr 2009 21:11:07 +0900 Subject: sh: pci: Rewrite SH7751 PCI support to follow SH7780. This follows the similar sort of scheme that the refactored SH7780 code uses, using a 64MB CS3 mapping to handle the window0 case, and simply discarding window1. This vastly simplifies the code, and allows most of the board-specific setup to go die. Signed-off-by: Paul Mundt diff --git a/arch/sh/drivers/pci/Kconfig b/arch/sh/drivers/pci/Kconfig index f9fb1d1..5aaee3c 100644 --- a/arch/sh/drivers/pci/Kconfig +++ b/arch/sh/drivers/pci/Kconfig @@ -23,7 +23,8 @@ config PCI_NEW bool depends on PCI default y if CPU_SUBTYPE_SH7763 || CPU_SUBTYPE_SH7780 || \ - CPU_SUBTYPE_SH7785 || CPU_SH5 + CPU_SUBTYPE_SH7785 || CPU_SH5 || \ + CPU_SUBTYPE_SH7751 || CPU_SUBTYPE_SH7751R # This is also board-specific config PCI_AUTO diff --git a/arch/sh/drivers/pci/Makefile b/arch/sh/drivers/pci/Makefile index cb2190c..b8667de 100644 --- a/arch/sh/drivers/pci/Makefile +++ b/arch/sh/drivers/pci/Makefile @@ -16,7 +16,7 @@ obj-$(CONFIG_SH_DREAMCAST) += ops-dreamcast.o fixups-dreamcast.o \ pci-dreamcast.o obj-$(CONFIG_SH_SECUREEDGE5410) += ops-snapgear.o obj-$(CONFIG_SH_RTS7751R2D) += ops-rts7751r2d.o fixups-rts7751r2d.o -obj-$(CONFIG_SH_SH03) += ops-sh03.o fixups-sh03.o +obj-$(CONFIG_SH_SH03) += fixups-sh03.o obj-$(CONFIG_SH_HIGHLANDER) += fixups-r7780rp.o obj-$(CONFIG_SH_SH7785LCR) += fixups-r7780rp.o obj-$(CONFIG_SH_SDK7780) += fixups-sdk7780.o diff --git a/arch/sh/drivers/pci/ops-landisk.c b/arch/sh/drivers/pci/ops-landisk.c index 178b778..bb1a6bb 100644 --- a/arch/sh/drivers/pci/ops-landisk.c +++ b/arch/sh/drivers/pci/ops-landisk.c @@ -15,37 +15,6 @@ #include #include "pci-sh4.h" -static struct resource sh7751_io_resource = { - .name = "SH7751 IO", - .start = SH7751_PCI_IO_BASE, - .end = SH7751_PCI_IO_BASE + SH7751_PCI_IO_SIZE - 1, - .flags = IORESOURCE_IO -}; - -static struct resource sh7751_mem_resource = { - .name = "SH7751 mem", - .start = SH7751_PCI_MEMORY_BASE, - .end = SH7751_PCI_MEMORY_BASE + SH7751_PCI_MEM_SIZE - 1, - .flags = IORESOURCE_MEM -}; - -struct pci_channel board_pci_channels[] = { - { sh7751_pci_init, &sh4_pci_ops, &sh7751_io_resource, &sh7751_mem_resource, 0, 0x3ff}, - {NULL, NULL, NULL, 0, 0}, -}; - -static struct sh4_pci_address_map sh7751_pci_map = { - .window0 = { - .base = SH7751_CS3_BASE_ADDR, - .size = (64 << 20), /* 64MB */ - }, -}; - -int __init pcibios_init_platform(void) -{ - return sh7751_pcic_init(&board_pci_channels[0], &sh7751_pci_map); -} - int pcibios_map_platform_irq(struct pci_dev *pdev, u8 slot, u8 pin) { /* diff --git a/arch/sh/drivers/pci/ops-lboxre2.c b/arch/sh/drivers/pci/ops-lboxre2.c index 91cabd8..6db2c20 100644 --- a/arch/sh/drivers/pci/ops-lboxre2.c +++ b/arch/sh/drivers/pci/ops-lboxre2.c @@ -21,36 +21,3 @@ int __init pcibios_map_platform_irq(struct pci_dev *pdev, u8 slot, u8 pin) { return lboxre2_irq_tab[slot]; } - -static struct resource sh7751_io_resource = { - .name = "SH7751_IO", - .start = SH7751_PCI_IO_BASE , - .end = SH7751_PCI_IO_BASE + SH7751_PCI_IO_SIZE - 1, - .flags = IORESOURCE_IO -}; - -static struct resource sh7751_mem_resource = { - .name = "SH7751_mem", - .start = SH7751_PCI_MEMORY_BASE, - .end = SH7751_PCI_MEMORY_BASE + SH7751_PCI_MEM_SIZE - 1, - .flags = IORESOURCE_MEM -}; - -extern struct pci_ops sh7751_pci_ops; - -struct pci_channel board_pci_channels[] = { - { sh7751_pci_init, &sh4_pci_ops, &sh7751_io_resource, &sh7751_mem_resource, 0, 0xff }, - { NULL, NULL, NULL, 0, 0 }, -}; - -static struct sh4_pci_address_map sh7751_pci_map = { - .window0 = { - .base = SH7751_CS3_BASE_ADDR, - .size = 0x04000000, - }, -}; - -int __init pcibios_init_platform(void) -{ - return sh7751_pcic_init(&board_pci_channels[0], &sh7751_pci_map); -} diff --git a/arch/sh/drivers/pci/ops-rts7751r2d.c b/arch/sh/drivers/pci/ops-rts7751r2d.c index 96b916c..d950b8a 100644 --- a/arch/sh/drivers/pci/ops-rts7751r2d.c +++ b/arch/sh/drivers/pci/ops-rts7751r2d.c @@ -29,37 +29,3 @@ int __init pcibios_map_platform_irq(struct pci_dev *pdev, u8 slot, u8 pin) { return rts7751r2d_irq_tab[slot]; } - -static struct resource sh7751_io_resource = { - .name = "SH7751_IO", - .start = 0x4000, - .end = SH7751_PCI_IO_SIZE - 1, - .flags = IORESOURCE_IO -}; - -static struct resource sh7751_mem_resource = { - .name = "SH7751_mem", - .start = SH7751_PCI_MEMORY_BASE, - .end = SH7751_PCI_MEMORY_BASE + SH7751_PCI_MEM_SIZE - 1, - .flags = IORESOURCE_MEM -}; - -extern struct pci_ops sh7751_pci_ops; - -struct pci_channel board_pci_channels[] = { - { sh7751_pci_init, &sh4_pci_ops, &sh7751_io_resource, &sh7751_mem_resource, 0, 0xff }, - { NULL, NULL, NULL, 0, 0 }, -}; - -static struct sh4_pci_address_map sh7751_pci_map = { - .window0 = { - .base = SH7751_CS3_BASE_ADDR, - .size = 0x04000000, - }, -}; - -int __init pcibios_init_platform(void) -{ - return sh7751_pcic_init(&board_pci_channels[0], &sh7751_pci_map); -} - diff --git a/arch/sh/drivers/pci/ops-sh03.c b/arch/sh/drivers/pci/ops-sh03.c deleted file mode 100644 index 0218135..0000000 --- a/arch/sh/drivers/pci/ops-sh03.c +++ /dev/null @@ -1,45 +0,0 @@ -/* - * linux/arch/sh/drivers/pci/ops-sh03.c - * - * PCI initialization for the Interface CTP/PCI-SH03 board - */ - -#include -#include -#include -#include -#include -#include -#include "pci-sh7751.h" - -/* - * Description: This function sets up and initializes the pcic, sets - * up the BARS, maps the DRAM into the address space etc, etc. - */ -int __init pcibios_init_platform(void) -{ - __set_io_port_base(SH7751_PCI_IO_BASE); - return 1; -} - -static struct resource sh7751_io_resource = { - .name = "SH03 IO", - .start = SH7751_PCI_IO_BASE, - .end = SH7751_PCI_IO_BASE + SH7751_PCI_IO_SIZE - 1, - .flags = IORESOURCE_IO -}; - -static struct resource sh7751_mem_resource = { - .name = "SH03 mem", - .start = SH7751_PCI_MEMORY_BASE, - .end = SH7751_PCI_MEMORY_BASE + SH7751_PCI_MEM_SIZE - 1, - .flags = IORESOURCE_MEM -}; - -extern struct pci_ops sh4_pci_ops; - -struct pci_channel board_pci_channels[] = { - { sh7751_pci_init, &sh4_pci_ops, &sh7751_io_resource, &sh7751_mem_resource, 0, 0xff }, - { NULL, NULL, NULL, 0, 0 }, -}; - diff --git a/arch/sh/drivers/pci/ops-snapgear.c b/arch/sh/drivers/pci/ops-snapgear.c index b64f2b9..5a39ecc 100644 --- a/arch/sh/drivers/pci/ops-snapgear.c +++ b/arch/sh/drivers/pci/ops-snapgear.c @@ -18,55 +18,6 @@ #include #include "pci-sh4.h" -#define SNAPGEAR_PCI_IO 0x4000 -#define SNAPGEAR_PCI_MEM 0xfd000000 - -/* PCI: default LOCAL memory window sizes (seen from PCI bus) */ -#define SNAPGEAR_LSR0_SIZE (64*(1<<20)) //64MB -#define SNAPGEAR_LSR1_SIZE (64*(1<<20)) //64MB - -static struct resource sh7751_io_resource = { - .name = "SH7751 IO", - .start = SNAPGEAR_PCI_IO, - .end = SNAPGEAR_PCI_IO + (64*1024) - 1, /* 64KiB I/O */ - .flags = IORESOURCE_IO, -}; - -static struct resource sh7751_mem_resource = { - .name = "SH7751 mem", - .start = SNAPGEAR_PCI_MEM, - .end = SNAPGEAR_PCI_MEM + (64*1024*1024) - 1, /* 64MiB mem */ - .flags = IORESOURCE_MEM, -}; - -struct pci_channel board_pci_channels[] = { - { sh7751_pci_init, &sh4_pci_ops, &sh7751_io_resource, &sh7751_mem_resource, 0, 0xff }, - { 0, } -}; - -static struct sh4_pci_address_map sh7751_pci_map = { - .window0 = { - .base = SH7751_CS2_BASE_ADDR, - .size = SNAPGEAR_LSR0_SIZE, - }, - - .window1 = { - .base = SH7751_CS2_BASE_ADDR, - .size = SNAPGEAR_LSR1_SIZE, - }, -}; - -/* - * Initialize the SnapGear PCI interface - * Setup hardware to be Central Funtion - * Copy the BSR regs to the PCI interface - * Setup PCI windows into local RAM - */ -int __init pcibios_init_platform(void) -{ - return sh7751_pcic_init(&board_pci_channels[0], &sh7751_pci_map); -} - int __init pcibios_map_platform_irq(struct pci_dev *pdev, u8 slot, u8 pin) { int irq = -1; diff --git a/arch/sh/drivers/pci/ops-titan.c b/arch/sh/drivers/pci/ops-titan.c index e45bb62..3a79fa8 100644 --- a/arch/sh/drivers/pci/ops-titan.c +++ b/arch/sh/drivers/pci/ops-titan.c @@ -36,39 +36,3 @@ int __init pcibios_map_platform_irq(struct pci_dev *pdev, u8 slot, u8 pin) return irq; } - -static struct resource sh7751_io_resource = { - .name = "SH7751_IO", - .start = SH7751_PCI_IO_BASE, - .end = SH7751_PCI_IO_BASE + SH7751_PCI_IO_SIZE - 1, - .flags = IORESOURCE_IO -}; - -static struct resource sh7751_mem_resource = { - .name = "SH7751_mem", - .start = SH7751_PCI_MEMORY_BASE, - .end = SH7751_PCI_MEMORY_BASE + SH7751_PCI_MEM_SIZE - 1, - .flags = IORESOURCE_MEM -}; - -struct pci_channel board_pci_channels[] = { - { sh7751_pci_init, &sh4_pci_ops, &sh7751_io_resource, &sh7751_mem_resource, 0, 0xff }, - { NULL, NULL, NULL, 0, 0 }, -}; - -static struct sh4_pci_address_map sh7751_pci_map = { - .window0 = { - .base = SH7751_CS2_BASE_ADDR, - .size = SH7751_MEM_REGION_SIZE*2, /* cs2 and cs3 */ - }, - - .window1 = { - .base = SH7751_CS2_BASE_ADDR, - .size = SH7751_MEM_REGION_SIZE*2, - }, -}; - -int __init pcibios_init_platform(void) -{ - return sh7751_pcic_init(&board_pci_channels[0], &sh7751_pci_map); -} diff --git a/arch/sh/drivers/pci/pci-sh7751.c b/arch/sh/drivers/pci/pci-sh7751.c index 4c08fd7..c4fa0bb1 100644 --- a/arch/sh/drivers/pci/pci-sh7751.c +++ b/arch/sh/drivers/pci/pci-sh7751.c @@ -1,78 +1,41 @@ /* - * Low-Level PCI Support for the SH7751 + * Low-Level PCI Support for the SH7751 * - * Dustin McIntire (dustin@sensoria.com) - * Derived from arch/i386/kernel/pci-*.c which bore the message: - * (c) 1999--2000 Martin Mares + * Copyright (C) 2003 - 2009 Paul Mundt + * Copyright (C) 2001 Dustin McIntire * - * Ported to the new API by Paul Mundt - * With cleanup by Paul van Gool - * - * May be copied or modified under the terms of the GNU General Public - * License. See linux/COPYING for more information. + * With cleanup by Paul van Gool , 2003. * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. */ -#undef DEBUG - #include #include #include #include -#include +#include #include "pci-sh4.h" #include -#include - -/* - * Initialization. Try all known PCI access methods. Note that we support - * using both PCI BIOS and direct access: in such cases, we use I/O ports - * to access config space. - * - * Note that the platform specific initialization (BSC registers, and memory - * space mapping) will be called via the platform defined function - * pcibios_init_platform(). - */ -int __init sh7751_pci_init(struct pci_channel *chan) -{ - unsigned int id; - int ret; - - pr_debug("PCI: Starting intialization.\n"); - - chan->reg_base = 0xfe200000; - - /* check for SH7751/SH7751R hardware */ - id = pci_read_reg(chan, SH7751_PCICONF0); - if (id != ((SH7751_DEVICE_ID << 16) | SH7751_VENDOR_ID) && - id != ((SH7751R_DEVICE_ID << 16) | SH7751_VENDOR_ID)) { - pr_debug("PCI: This is not an SH7751(R) (%x)\n", id); - return -ENODEV; - } - - if ((ret = sh4_pci_check_direct(chan)) != 0) - return ret; - - return pcibios_init_platform(); -} static int __init __area_sdram_check(struct pci_channel *chan, unsigned int area) { - u32 word; + unsigned long word; - word = ctrl_inl(SH7751_BCR1); + word = __raw_readl(SH7751_BCR1); /* check BCR for SDRAM in area */ if (((word >> area) & 1) == 0) { - printk("PCI: Area %d is not configured for SDRAM. BCR1=0x%x\n", + printk("PCI: Area %d is not configured for SDRAM. BCR1=0x%lx\n", area, word); return 0; } pci_write_reg(chan, word, SH4_PCIBCR1); - word = (u16)ctrl_inw(SH7751_BCR2); + word = __raw_readw(SH7751_BCR2); /* check BCR2 for 32bit SDRAM interface*/ if (((word >> (area << 1)) & 0x3) != 0x3) { - printk("PCI: Area %d is not 32 bit SDRAM. BCR2=0x%x\n", + printk("PCI: Area %d is not 32 bit SDRAM. BCR2=0x%lx\n", area, word); return 0; } @@ -81,11 +44,56 @@ static int __init __area_sdram_check(struct pci_channel *chan, return 1; } -int __init sh7751_pcic_init(struct pci_channel *chan, - struct sh4_pci_address_map *map) +static struct resource sh7751_io_resource = { + .name = "SH7751_IO", + .start = SH7751_PCI_IO_BASE, + .end = SH7751_PCI_IO_BASE + SH7751_PCI_IO_SIZE - 1, + .flags = IORESOURCE_IO +}; + +static struct resource sh7751_mem_resource = { + .name = "SH7785_mem", + .start = SH7751_PCI_MEMORY_BASE, + .end = SH7751_PCI_MEMORY_BASE + SH7751_PCI_MEM_SIZE - 1, + .flags = IORESOURCE_MEM +}; + +static struct pci_channel sh7751_pci_controller = { + .pci_ops = &sh4_pci_ops, + .mem_resource = &sh7751_mem_resource, + .mem_offset = 0x00000000, + .io_resource = &sh7751_io_resource, + .io_offset = 0x00000000, +}; + +static struct sh4_pci_address_map sh7751_pci_map = { + .window0 = { + .base = SH7751_CS3_BASE_ADDR, + .size = 0x04000000, + }, +}; + +static int __init sh7751_pci_init(void) { - u32 reg; - u32 word; + struct pci_channel *chan = &sh7751_pci_controller; + unsigned int id; + u32 word, reg; + int ret; + + printk(KERN_NOTICE "PCI: Starting intialization.\n"); + + chan->reg_base = 0xfe200000; + + /* check for SH7751/SH7751R hardware */ + id = pci_read_reg(chan, SH7751_PCICONF0); + if (id != ((SH7751_DEVICE_ID << 16) | SH7751_VENDOR_ID) && + id != ((SH7751R_DEVICE_ID << 16) | SH7751_VENDOR_ID)) { + pr_debug("PCI: This is not an SH7751(R) (%x)\n", id); + return -ENODEV; + } + + if ((ret = sh4_pci_check_direct(chan)) != 0) + return ret; /* Set the BCR's to enable PCI access */ reg = ctrl_inl(SH7751_BCR1); @@ -112,21 +120,13 @@ int __init sh7751_pcic_init(struct pci_channel *chan, /* Set IO and Mem windows to local address * Make PCI and local address the same for easy 1 to 1 mapping - * Window0 = map->window0.size @ non-cached area base = SDRAM - * Window1 = map->window1.size @ cached area base = SDRAM */ - word = map->window0.size - 1; + word = sh7751_pci_map.window0.size - 1; pci_write_reg(chan, word, SH4_PCILSR0); - word = map->window1.size - 1; - pci_write_reg(chan, word, SH4_PCILSR1); /* Set the values on window 0 PCI config registers */ - word = P2SEGADDR(map->window0.base); + word = P2SEGADDR(sh7751_pci_map.window0.base); pci_write_reg(chan, word, SH4_PCILAR0); pci_write_reg(chan, word, SH7751_PCICONF5); - /* Set the values on window 1 PCI config registers */ - word = PHYSADDR(map->window1.base); - pci_write_reg(chan, word, SH4_PCILAR1); - pci_write_reg(chan, word, SH7751_PCICONF6); /* Set the local 16MB PCI memory space window to * the lowest PCI mapped address @@ -144,7 +144,7 @@ int __init sh7751_pcic_init(struct pci_channel *chan, /* Set PCI WCRx, BCRx's, copy from BSC locations */ /* check BCR for SDRAM in specified area */ - switch (map->window0.base) { + switch (sh7751_pci_map.window0.base) { case SH7751_CS0_BASE_ADDR: word = __area_sdram_check(chan, 0); break; case SH7751_CS1_BASE_ADDR: word = __area_sdram_check(chan, 1); break; case SH7751_CS2_BASE_ADDR: word = __area_sdram_check(chan, 2); break; @@ -179,5 +179,10 @@ int __init sh7751_pcic_init(struct pci_channel *chan, word = SH4_PCICR_PREFIX | SH4_PCICR_CFIN | SH4_PCICR_ARBM; pci_write_reg(chan, word, SH4_PCICR); + __set_io_port_base(SH7751_PCI_IO_BASE); + + register_pci_controller(chan); + return 0; } +arch_initcall(sh7751_pci_init); diff --git a/arch/sh/drivers/pci/pci-sh7751.h b/arch/sh/drivers/pci/pci-sh7751.h index c390dd2..4983a4d 100644 --- a/arch/sh/drivers/pci/pci-sh7751.h +++ b/arch/sh/drivers/pci/pci-sh7751.h @@ -57,7 +57,7 @@ #define SH7751_PCICONF2_SCC 0x00FF0000 /* Sub-Class Code */ #define SH7751_PCICONF2_RLPI 0x0000FF00 /* Programming Interface */ #define SH7751_PCICONF2_REV 0x000000FF /* Revision ID */ -#define SH7751_PCICONF3 0xC /* PCI Config Reg 3 */ +#define SH7751_PCICONF3 0xC /* PCI Config Reg 3 */ #define SH7751_PCICONF3_BIST7 0x80000000 /* Bist Supported */ #define SH7751_PCICONF3_BIST6 0x40000000 /* Bist Executing */ #define SH7751_PCICONF3_BIST3_0 0x0F000000 /* Bist Passed */ @@ -72,12 +72,12 @@ #define SH7751_PCICONF5_BASE 0xFFFFFFF0 /* Mem Space Base Addr */ #define SH7751_PCICONF5_LAP 0x00000008 /* Prefetch Enabled */ #define SH7751_PCICONF5_LAT 0x00000006 /* Local Memory type */ - #define SH7751_PCICONF5_ASI 0x00000001 /* Address Space Type */ + #define SH7751_PCICONF5_ASI 0x00000001 /* Address Space Type */ #define SH7751_PCICONF6 0x18 /* PCI Config Reg 6 */ #define SH7751_PCICONF6_BASE 0xFFFFFFF0 /* Mem Space Base Addr */ #define SH7751_PCICONF6_LAP 0x00000008 /* Prefetch Enabled */ #define SH7751_PCICONF6_LAT 0x00000006 /* Local Memory type */ - #define SH7751_PCICONF6_ASI 0x00000001 /* Address Space Type */ + #define SH7751_PCICONF6_ASI 0x00000001 /* Address Space Type */ /* PCICONF7 - PCICONF10 are undefined */ #define SH7751_PCICONF11 0x2C /* PCI Config Reg 11 */ #define SH7751_PCICONF11_SSID 0xFFFF0000 /* Subsystem ID */ @@ -126,11 +126,4 @@ #define SH7751_CS5_BASE_ADDR (SH7751_CS4_BASE_ADDR + SH7751_MEM_REGION_SIZE) #define SH7751_CS6_BASE_ADDR (SH7751_CS5_BASE_ADDR + SH7751_MEM_REGION_SIZE) -struct sh4_pci_address_map; - -/* arch/sh/drivers/pci/pci-sh7751.c */ -int sh7751_pci_init(struct pci_channel *chan); -int sh7751_pcic_init(struct pci_channel *chan, - struct sh4_pci_address_map *map); - #endif /* _PCI_SH7751_H_ */ -- cgit v0.10.2 From 84972ec0c206b73ffb74e5114b574186ce6166b8 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Mon, 20 Apr 2009 21:17:10 +0900 Subject: sh: pci: Rename SH7751 platform ops files to fixups. None of these contain pci_ops, only IRQ routing bits, rename them accordingly. Signed-off-by: Paul Mundt diff --git a/arch/sh/drivers/pci/Makefile b/arch/sh/drivers/pci/Makefile index b8667de..abd931c 100644 --- a/arch/sh/drivers/pci/Makefile +++ b/arch/sh/drivers/pci/Makefile @@ -14,14 +14,14 @@ obj-$(CONFIG_CPU_SH5) += pci-sh5.o ops-sh5.o obj-$(CONFIG_SH_DREAMCAST) += ops-dreamcast.o fixups-dreamcast.o \ pci-dreamcast.o -obj-$(CONFIG_SH_SECUREEDGE5410) += ops-snapgear.o +obj-$(CONFIG_SH_SECUREEDGE5410) += fixups-snapgear.o obj-$(CONFIG_SH_RTS7751R2D) += ops-rts7751r2d.o fixups-rts7751r2d.o obj-$(CONFIG_SH_SH03) += fixups-sh03.o obj-$(CONFIG_SH_HIGHLANDER) += fixups-r7780rp.o obj-$(CONFIG_SH_SH7785LCR) += fixups-r7780rp.o obj-$(CONFIG_SH_SDK7780) += fixups-sdk7780.o obj-$(CONFIG_SH_7780_SOLUTION_ENGINE) += fixups-sdk7780.o -obj-$(CONFIG_SH_TITAN) += ops-titan.o -obj-$(CONFIG_SH_LANDISK) += ops-landisk.o -obj-$(CONFIG_SH_LBOX_RE2) += ops-lboxre2.o fixups-rts7751r2d.o +obj-$(CONFIG_SH_TITAN) += fixups-titan.o +obj-$(CONFIG_SH_LANDISK) += fixups-landisk.o +obj-$(CONFIG_SH_LBOX_RE2) += fixups-lboxre2.o fixups-rts7751r2d.o obj-$(CONFIG_SH_CAYMAN) += fixups-cayman.o diff --git a/arch/sh/drivers/pci/fixups-landisk.c b/arch/sh/drivers/pci/fixups-landisk.c new file mode 100644 index 0000000..bb1a6bb --- /dev/null +++ b/arch/sh/drivers/pci/fixups-landisk.c @@ -0,0 +1,34 @@ +/* + * arch/sh/drivers/pci/ops-landisk.c + * + * PCI initialization for the I-O DATA Device, Inc. LANDISK board + * + * Copyright (C) 2006 kogiidena + * + * May be copied or modified under the terms of the GNU General Public + * License. See linux/COPYING for more information. + */ +#include +#include +#include +#include +#include +#include "pci-sh4.h" + +int pcibios_map_platform_irq(struct pci_dev *pdev, u8 slot, u8 pin) +{ + /* + * slot0: pin1-4 = irq5,6,7,8 + * slot1: pin1-4 = irq6,7,8,5 + * slot2: pin1-4 = irq7,8,5,6 + * slot3: pin1-4 = irq8,5,6,7 + */ + int irq = ((slot + pin - 1) & 0x3) + 5; + + if ((slot | (pin - 1)) > 0x3) { + printk("PCI: Bad IRQ mapping request for slot %d pin %c\n", + slot, pin - 1 + 'A'); + return -1; + } + return irq; +} diff --git a/arch/sh/drivers/pci/fixups-lboxre2.c b/arch/sh/drivers/pci/fixups-lboxre2.c new file mode 100644 index 0000000..6db2c20 --- /dev/null +++ b/arch/sh/drivers/pci/fixups-lboxre2.c @@ -0,0 +1,23 @@ +/* + * linux/arch/sh/drivers/pci/ops-lboxre2.c + * + * Copyright (C) 2007 Nobuhiro Iwamatsu + * + * PCI initialization for the NTT COMWARE L-BOX RE2 + */ +#include +#include +#include +#include +#include +#include +#include "pci-sh4.h" + +static char lboxre2_irq_tab[] __initdata = { + IRQ_ETH0, IRQ_ETH1, IRQ_INTA, IRQ_INTD, +}; + +int __init pcibios_map_platform_irq(struct pci_dev *pdev, u8 slot, u8 pin) +{ + return lboxre2_irq_tab[slot]; +} diff --git a/arch/sh/drivers/pci/fixups-snapgear.c b/arch/sh/drivers/pci/fixups-snapgear.c new file mode 100644 index 0000000..5a39ecc --- /dev/null +++ b/arch/sh/drivers/pci/fixups-snapgear.c @@ -0,0 +1,38 @@ +/* + * arch/sh/drivers/pci/ops-snapgear.c + * + * Author: David McCullough + * + * Ported to new API by Paul Mundt + * + * Highly leveraged from pci-bigsur.c, written by Dustin McIntire. + * + * May be copied or modified under the terms of the GNU General Public + * License. See linux/COPYING for more information. + * + * PCI initialization for the SnapGear boards + */ +#include +#include +#include +#include +#include "pci-sh4.h" + +int __init pcibios_map_platform_irq(struct pci_dev *pdev, u8 slot, u8 pin) +{ + int irq = -1; + + switch (slot) { + case 8: /* the PCI bridge */ break; + case 11: irq = 8; break; /* USB */ + case 12: irq = 11; break; /* PCMCIA */ + case 13: irq = 5; break; /* eth0 */ + case 14: irq = 8; break; /* eth1 */ + case 15: irq = 11; break; /* safenet (unused) */ + } + + printk("PCI: Mapping SnapGear IRQ for slot %d, pin %c to irq %d\n", + slot, pin - 1 + 'A', irq); + + return irq; +} diff --git a/arch/sh/drivers/pci/fixups-titan.c b/arch/sh/drivers/pci/fixups-titan.c new file mode 100644 index 0000000..3a79fa8 --- /dev/null +++ b/arch/sh/drivers/pci/fixups-titan.c @@ -0,0 +1,38 @@ +/* + * arch/sh/drivers/pci/ops-titan.c + * + * Ported to new API by Paul Mundt + * + * Modified from ops-snapgear.c written by David McCullough + * Highly leveraged from pci-bigsur.c, written by Dustin McIntire. + * + * May be copied or modified under the terms of the GNU General Public + * License. See linux/COPYING for more information. + * + * PCI initialization for the Titan boards + */ +#include +#include +#include +#include +#include +#include +#include "pci-sh4.h" + +static char titan_irq_tab[] __initdata = { + TITAN_IRQ_WAN, + TITAN_IRQ_LAN, + TITAN_IRQ_MPCIA, + TITAN_IRQ_MPCIB, + TITAN_IRQ_USB, +}; + +int __init pcibios_map_platform_irq(struct pci_dev *pdev, u8 slot, u8 pin) +{ + int irq = titan_irq_tab[slot]; + + printk("PCI: Mapping TITAN IRQ for slot %d, pin %c to irq %d\n", + slot, pin - 1 + 'A', irq); + + return irq; +} diff --git a/arch/sh/drivers/pci/ops-landisk.c b/arch/sh/drivers/pci/ops-landisk.c deleted file mode 100644 index bb1a6bb..0000000 --- a/arch/sh/drivers/pci/ops-landisk.c +++ /dev/null @@ -1,34 +0,0 @@ -/* - * arch/sh/drivers/pci/ops-landisk.c - * - * PCI initialization for the I-O DATA Device, Inc. LANDISK board - * - * Copyright (C) 2006 kogiidena - * - * May be copied or modified under the terms of the GNU General Public - * License. See linux/COPYING for more information. - */ -#include -#include -#include -#include -#include -#include "pci-sh4.h" - -int pcibios_map_platform_irq(struct pci_dev *pdev, u8 slot, u8 pin) -{ - /* - * slot0: pin1-4 = irq5,6,7,8 - * slot1: pin1-4 = irq6,7,8,5 - * slot2: pin1-4 = irq7,8,5,6 - * slot3: pin1-4 = irq8,5,6,7 - */ - int irq = ((slot + pin - 1) & 0x3) + 5; - - if ((slot | (pin - 1)) > 0x3) { - printk("PCI: Bad IRQ mapping request for slot %d pin %c\n", - slot, pin - 1 + 'A'); - return -1; - } - return irq; -} diff --git a/arch/sh/drivers/pci/ops-lboxre2.c b/arch/sh/drivers/pci/ops-lboxre2.c deleted file mode 100644 index 6db2c20..0000000 --- a/arch/sh/drivers/pci/ops-lboxre2.c +++ /dev/null @@ -1,23 +0,0 @@ -/* - * linux/arch/sh/drivers/pci/ops-lboxre2.c - * - * Copyright (C) 2007 Nobuhiro Iwamatsu - * - * PCI initialization for the NTT COMWARE L-BOX RE2 - */ -#include -#include -#include -#include -#include -#include -#include "pci-sh4.h" - -static char lboxre2_irq_tab[] __initdata = { - IRQ_ETH0, IRQ_ETH1, IRQ_INTA, IRQ_INTD, -}; - -int __init pcibios_map_platform_irq(struct pci_dev *pdev, u8 slot, u8 pin) -{ - return lboxre2_irq_tab[slot]; -} diff --git a/arch/sh/drivers/pci/ops-snapgear.c b/arch/sh/drivers/pci/ops-snapgear.c deleted file mode 100644 index 5a39ecc..0000000 --- a/arch/sh/drivers/pci/ops-snapgear.c +++ /dev/null @@ -1,38 +0,0 @@ -/* - * arch/sh/drivers/pci/ops-snapgear.c - * - * Author: David McCullough - * - * Ported to new API by Paul Mundt - * - * Highly leveraged from pci-bigsur.c, written by Dustin McIntire. - * - * May be copied or modified under the terms of the GNU General Public - * License. See linux/COPYING for more information. - * - * PCI initialization for the SnapGear boards - */ -#include -#include -#include -#include -#include "pci-sh4.h" - -int __init pcibios_map_platform_irq(struct pci_dev *pdev, u8 slot, u8 pin) -{ - int irq = -1; - - switch (slot) { - case 8: /* the PCI bridge */ break; - case 11: irq = 8; break; /* USB */ - case 12: irq = 11; break; /* PCMCIA */ - case 13: irq = 5; break; /* eth0 */ - case 14: irq = 8; break; /* eth1 */ - case 15: irq = 11; break; /* safenet (unused) */ - } - - printk("PCI: Mapping SnapGear IRQ for slot %d, pin %c to irq %d\n", - slot, pin - 1 + 'A', irq); - - return irq; -} diff --git a/arch/sh/drivers/pci/ops-titan.c b/arch/sh/drivers/pci/ops-titan.c deleted file mode 100644 index 3a79fa8..0000000 --- a/arch/sh/drivers/pci/ops-titan.c +++ /dev/null @@ -1,38 +0,0 @@ -/* - * arch/sh/drivers/pci/ops-titan.c - * - * Ported to new API by Paul Mundt - * - * Modified from ops-snapgear.c written by David McCullough - * Highly leveraged from pci-bigsur.c, written by Dustin McIntire. - * - * May be copied or modified under the terms of the GNU General Public - * License. See linux/COPYING for more information. - * - * PCI initialization for the Titan boards - */ -#include -#include -#include -#include -#include -#include -#include "pci-sh4.h" - -static char titan_irq_tab[] __initdata = { - TITAN_IRQ_WAN, - TITAN_IRQ_LAN, - TITAN_IRQ_MPCIA, - TITAN_IRQ_MPCIB, - TITAN_IRQ_USB, -}; - -int __init pcibios_map_platform_irq(struct pci_dev *pdev, u8 slot, u8 pin) -{ - int irq = titan_irq_tab[slot]; - - printk("PCI: Mapping TITAN IRQ for slot %d, pin %c to irq %d\n", - slot, pin - 1 + 'A', irq); - - return irq; -} -- cgit v0.10.2 From 37c8ac361efdbae969eff1a603bc39412d3e873f Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Mon, 20 Apr 2009 21:27:15 +0900 Subject: sh: pci: Consolidate lboxre2 and r2d IRQ fixups. Signed-off-by: Paul Mundt diff --git a/arch/sh/drivers/pci/Makefile b/arch/sh/drivers/pci/Makefile index abd931c..fbebd73 100644 --- a/arch/sh/drivers/pci/Makefile +++ b/arch/sh/drivers/pci/Makefile @@ -15,7 +15,7 @@ obj-$(CONFIG_CPU_SH5) += pci-sh5.o ops-sh5.o obj-$(CONFIG_SH_DREAMCAST) += ops-dreamcast.o fixups-dreamcast.o \ pci-dreamcast.o obj-$(CONFIG_SH_SECUREEDGE5410) += fixups-snapgear.o -obj-$(CONFIG_SH_RTS7751R2D) += ops-rts7751r2d.o fixups-rts7751r2d.o +obj-$(CONFIG_SH_RTS7751R2D) += fixups-rts7751r2d.o obj-$(CONFIG_SH_SH03) += fixups-sh03.o obj-$(CONFIG_SH_HIGHLANDER) += fixups-r7780rp.o obj-$(CONFIG_SH_SH7785LCR) += fixups-r7780rp.o @@ -23,5 +23,5 @@ obj-$(CONFIG_SH_SDK7780) += fixups-sdk7780.o obj-$(CONFIG_SH_7780_SOLUTION_ENGINE) += fixups-sdk7780.o obj-$(CONFIG_SH_TITAN) += fixups-titan.o obj-$(CONFIG_SH_LANDISK) += fixups-landisk.o -obj-$(CONFIG_SH_LBOX_RE2) += fixups-lboxre2.o fixups-rts7751r2d.o +obj-$(CONFIG_SH_LBOX_RE2) += fixups-rts7751r2d.o obj-$(CONFIG_SH_CAYMAN) += fixups-cayman.o diff --git a/arch/sh/drivers/pci/fixups-lboxre2.c b/arch/sh/drivers/pci/fixups-lboxre2.c deleted file mode 100644 index 6db2c20..0000000 --- a/arch/sh/drivers/pci/fixups-lboxre2.c +++ /dev/null @@ -1,23 +0,0 @@ -/* - * linux/arch/sh/drivers/pci/ops-lboxre2.c - * - * Copyright (C) 2007 Nobuhiro Iwamatsu - * - * PCI initialization for the NTT COMWARE L-BOX RE2 - */ -#include -#include -#include -#include -#include -#include -#include "pci-sh4.h" - -static char lboxre2_irq_tab[] __initdata = { - IRQ_ETH0, IRQ_ETH1, IRQ_INTA, IRQ_INTD, -}; - -int __init pcibios_map_platform_irq(struct pci_dev *pdev, u8 slot, u8 pin) -{ - return lboxre2_irq_tab[slot]; -} diff --git a/arch/sh/drivers/pci/fixups-rts7751r2d.c b/arch/sh/drivers/pci/fixups-rts7751r2d.c index 3885233..052b354 100644 --- a/arch/sh/drivers/pci/fixups-rts7751r2d.c +++ b/arch/sh/drivers/pci/fixups-rts7751r2d.c @@ -1,21 +1,44 @@ /* * arch/sh/drivers/pci/fixups-rts7751r2d.c * - * RTS7751R2D PCI fixups + * RTS7751R2D / LBOXRE2 PCI fixups * * Copyright (C) 2003 Lineo uSolutions, Inc. * Copyright (C) 2004 Paul Mundt + * Copyright (C) 2007 Nobuhiro Iwamatsu * * This file is subject to the terms and conditions of the GNU General Public * License. See the file "COPYING" in the main directory of this archive * for more details. */ #include +#include +#include #include "pci-sh4.h" +#include #define PCIMCR_MRSET_OFF 0xBFFFFFFF #define PCIMCR_RFSH_OFF 0xFFFFFFFB +static u8 rts7751r2d_irq_tab[] __initdata = { + IRQ_PCI_INTA, + IRQ_PCI_INTB, + IRQ_PCI_INTC, + IRQ_PCI_INTD, +}; + +static char lboxre2_irq_tab[] __initdata = { + IRQ_ETH0, IRQ_ETH1, IRQ_INTA, IRQ_INTD, +}; + +int __init pcibios_map_platform_irq(struct pci_dev *pdev, u8 slot, u8 pin) +{ + if (mach_is_lboxre2()) + return lboxre2_irq_tab[slot]; + else + return rts7751r2d_irq_tab[slot]; +} + int pci_fixup_pcic(struct pci_channel *chan) { unsigned long bcr1, mcr; diff --git a/arch/sh/drivers/pci/ops-rts7751r2d.c b/arch/sh/drivers/pci/ops-rts7751r2d.c deleted file mode 100644 index d950b8a..0000000 --- a/arch/sh/drivers/pci/ops-rts7751r2d.c +++ /dev/null @@ -1,31 +0,0 @@ -/* - * linux/arch/sh/drivers/pci/ops-rts7751r2d.c - * - * Author: Ian DaSilva (idasilva@mvista.com) - * - * Highly leveraged from pci-bigsur.c, written by Dustin McIntire. - * - * May be copied or modified under the terms of the GNU General Public - * License. See linux/COPYING for more information. - * - * PCI initialization for the Renesas SH7751R RTS7751R2D board - */ -#include -#include -#include -#include -#include -#include -#include "pci-sh4.h" - -static u8 rts7751r2d_irq_tab[] __initdata = { - IRQ_PCI_INTA, - IRQ_PCI_INTB, - IRQ_PCI_INTC, - IRQ_PCI_INTD, -}; - -int __init pcibios_map_platform_irq(struct pci_dev *pdev, u8 slot, u8 pin) -{ - return rts7751r2d_irq_tab[slot]; -} -- cgit v0.10.2 From 951a681bda844491de8699b3bdc6c3899cbd4c9f Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Mon, 20 Apr 2009 21:34:36 +0900 Subject: sh: pci: Convert dreamcast to new-style interface. Signed-off-by: Paul Mundt diff --git a/arch/sh/drivers/pci/Kconfig b/arch/sh/drivers/pci/Kconfig index 5aaee3c..1d53496 100644 --- a/arch/sh/drivers/pci/Kconfig +++ b/arch/sh/drivers/pci/Kconfig @@ -20,11 +20,8 @@ config SH_PCIDMA_NONCOHERENT # Temporary config option for transitioning off of PCI_AUTO config PCI_NEW - bool + def_bool y depends on PCI - default y if CPU_SUBTYPE_SH7763 || CPU_SUBTYPE_SH7780 || \ - CPU_SUBTYPE_SH7785 || CPU_SH5 || \ - CPU_SUBTYPE_SH7751 || CPU_SUBTYPE_SH7751R # This is also board-specific config PCI_AUTO diff --git a/arch/sh/drivers/pci/fixups-dreamcast.c b/arch/sh/drivers/pci/fixups-dreamcast.c index 48c6381..ed7f489 100644 --- a/arch/sh/drivers/pci/fixups-dreamcast.c +++ b/arch/sh/drivers/pci/fixups-dreamcast.c @@ -30,7 +30,7 @@ static void __init gapspci_fixup_resources(struct pci_dev *dev) { - struct pci_channel *p = board_pci_channels; + struct pci_channel *p = dev->sysdata; printk(KERN_NOTICE "PCI: Fixing up device %s\n", pci_name(dev)); diff --git a/arch/sh/drivers/pci/pci-dreamcast.c b/arch/sh/drivers/pci/pci-dreamcast.c index 0897be5..210f9d4 100644 --- a/arch/sh/drivers/pci/pci-dreamcast.c +++ b/arch/sh/drivers/pci/pci-dreamcast.c @@ -21,7 +21,6 @@ #include #include #include - #include #include #include @@ -40,11 +39,19 @@ static struct resource gapspci_mem_resource = { .flags = IORESOURCE_MEM, }; +static struct pci_channel dreamcast_pci_controller = { + .pci_ops = &gapspci_pci_ops, + .io_resource = &gapspci_io_resource, + .io_offset = 0x00000000, + .mem_resource = &gapspci_mem_resource, + .mem_offset = 0x00000000, +}; + /* * gapspci init */ -static int __init gapspci_init(struct pci_channel *chan) +static int __init gapspci_init(void) { char idbuf[16]; int i; @@ -88,18 +95,8 @@ static int __init gapspci_init(struct pci_channel *chan) outl(0x00002001, GAPSPCI_BBA_CONFIG+0x10); outl(0x01000000, GAPSPCI_BBA_CONFIG+0x14); + register_pci_controller(&dreamcast_pci_controller); + return 0; } - -struct pci_channel board_pci_channels[] = { - { - .init = gapspci_init, - .pci_ops = &gapspci_pci_ops, - .io_resource = &gapspci_io_resource, - .mem_resource = &gapspci_mem_resource, - .first_devfn = 0, - .last_devfn = 1, - }, { - .init = NULL, - } -}; +arch_initcall(gapspci_init); -- cgit v0.10.2 From 2d5efc190eb415dbff79ffab4f8ea731ab0288a9 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Mon, 20 Apr 2009 21:42:59 +0900 Subject: sh: pci: Move the se7751 fixups in to arch/sh/drivers/pci/. The se7751 was still doing the PCI fixups in its own board directory, so we move it over to arch/sh/drivers/pci/ with the rest of the board fixups. It has bitrotted significantly over the years, so will still likely need a bit of work to bring back up to date. Signed-off-by: Paul Mundt diff --git a/arch/sh/boards/mach-se/7751/Makefile b/arch/sh/boards/mach-se/7751/Makefile index dbc29f3..e6f4341 100644 --- a/arch/sh/boards/mach-se/7751/Makefile +++ b/arch/sh/boards/mach-se/7751/Makefile @@ -3,5 +3,3 @@ # obj-y := setup.o io.o irq.o - -obj-$(CONFIG_PCI) += pci.o diff --git a/arch/sh/boards/mach-se/7751/pci.c b/arch/sh/boards/mach-se/7751/pci.c deleted file mode 100644 index 9ec64a4..0000000 --- a/arch/sh/boards/mach-se/7751/pci.c +++ /dev/null @@ -1,150 +0,0 @@ -/* - * linux/arch/sh/boards/se/7751/pci.c - * - * Author: Ian DaSilva (idasilva@mvista.com) - * - * Highly leveraged from pci-bigsur.c, written by Dustin McIntire. - * - * May be copied or modified under the terms of the GNU General Public - * License. See linux/COPYING for more information. - * - * PCI initialization for the Hitachi SH7751 Solution Engine board (MS7751SE01) - */ - -#include -#include -#include -#include -#include - -#include -#include "../../../drivers/pci/pci-sh7751.h" - -#define PCIMCR_MRSET_OFF 0xBFFFFFFF -#define PCIMCR_RFSH_OFF 0xFFFFFFFB - -/* - * Only long word accesses of the PCIC's internal local registers and the - * configuration registers from the CPU is supported. - */ -#define PCIC_WRITE(x,v) writel((v), PCI_REG(x)) -#define PCIC_READ(x) readl(PCI_REG(x)) - -#define xPCIBIOS_MIN_IO board_pci_channels->io_resource->start -#define xPCIBIOS_MIN_MEM board_pci_channels->mem_resource->start - -/* - * Description: This function sets up and initializes the pcic, sets - * up the BARS, maps the DRAM into the address space etc, etc. - */ -int __init pcibios_init_platform(void) -{ - unsigned long bcr1, wcr1, wcr2, wcr3, mcr; - unsigned short bcr2; - - /* - * Initialize the slave bus controller on the pcic. The values used - * here should not be hardcoded, but they should be taken from the bsc - * on the processor, to make this function as generic as possible. - * (i.e. Another sbc may usr different SDRAM timing settings -- in order - * for the pcic to work, its settings need to be exactly the same.) - */ - bcr1 = (*(volatile unsigned long*)(SH7751_BCR1)); - bcr2 = (*(volatile unsigned short*)(SH7751_BCR2)); - wcr1 = (*(volatile unsigned long*)(SH7751_WCR1)); - wcr2 = (*(volatile unsigned long*)(SH7751_WCR2)); - wcr3 = (*(volatile unsigned long*)(SH7751_WCR3)); - mcr = (*(volatile unsigned long*)(SH7751_MCR)); - - bcr1 = bcr1 | 0x00080000; /* Enable Bit 19, BREQEN */ - (*(volatile unsigned long*)(SH7751_BCR1)) = bcr1; - - bcr1 = bcr1 | 0x40080000; /* Enable Bit 19 BREQEN, set PCIC to slave */ - PCIC_WRITE(SH7751_PCIBCR1, bcr1); /* PCIC BCR1 */ - PCIC_WRITE(SH7751_PCIBCR2, bcr2); /* PCIC BCR2 */ - PCIC_WRITE(SH7751_PCIWCR1, wcr1); /* PCIC WCR1 */ - PCIC_WRITE(SH7751_PCIWCR2, wcr2); /* PCIC WCR2 */ - PCIC_WRITE(SH7751_PCIWCR3, wcr3); /* PCIC WCR3 */ - mcr = (mcr & PCIMCR_MRSET_OFF) & PCIMCR_RFSH_OFF; - PCIC_WRITE(SH7751_PCIMCR, mcr); /* PCIC MCR */ - - - /* Enable all interrupts, so we know what to fix */ - PCIC_WRITE(SH7751_PCIINTM, 0x0000c3ff); - PCIC_WRITE(SH7751_PCIAINTM, 0x0000380f); - - /* Set up standard PCI config registers */ - PCIC_WRITE(SH7751_PCICONF1, 0xF39000C7); /* Bus Master, Mem & I/O access */ - PCIC_WRITE(SH7751_PCICONF2, 0x00000000); /* PCI Class code & Revision ID */ - PCIC_WRITE(SH7751_PCICONF4, 0xab000001); /* PCI I/O address (local regs) */ - PCIC_WRITE(SH7751_PCICONF5, 0x0c000000); /* PCI MEM address (local RAM) */ - PCIC_WRITE(SH7751_PCICONF6, 0xd0000000); /* PCI MEM address (unused) */ - PCIC_WRITE(SH7751_PCICONF11, 0x35051054); /* PCI Subsystem ID & Vendor ID */ - PCIC_WRITE(SH7751_PCILSR0, 0x03f00000); /* MEM (full 64M exposed) */ - PCIC_WRITE(SH7751_PCILSR1, 0x00000000); /* MEM (unused) */ - PCIC_WRITE(SH7751_PCILAR0, 0x0c000000); /* MEM (direct map from PCI) */ - PCIC_WRITE(SH7751_PCILAR1, 0x00000000); /* MEM (unused) */ - - /* Now turn it on... */ - PCIC_WRITE(SH7751_PCICR, 0xa5000001); - - /* - * Set PCIMBR and PCIIOBR here, assuming a single window - * (16M MEM, 256K IO) is enough. If a larger space is - * needed, the readx/writex and inx/outx functions will - * have to do more (e.g. setting registers for each call). - */ - - /* - * Set the MBR so PCI address is one-to-one with window, - * meaning all calls go straight through... use BUG_ON to - * catch erroneous assumption. - */ - BUG_ON(xPCIBIOS_MIN_MEM != SH7751_PCI_MEMORY_BASE); - - PCIC_WRITE(SH7751_PCIMBR, xPCIBIOS_MIN_MEM); - - /* Set IOBR for window containing area specified in pci.h */ - PCIC_WRITE(SH7751_PCIIOBR, (xPCIBIOS_MIN_IO & SH7751_PCIIOBR_MASK)); - - /* All done, may as well say so... */ - printk("SH7751 PCI: Finished initialization of the PCI controller\n"); - - return 1; -} - -int __init pcibios_map_platform_irq(u8 slot, u8 pin) -{ - switch (slot) { - case 0: return 13; - case 1: return 13; /* AMD Ethernet controller */ - case 2: return -1; - case 3: return -1; - case 4: return -1; - default: - printk("PCI: Bad IRQ mapping request for slot %d\n", slot); - return -1; - } -} - -static struct resource sh7751_io_resource = { - .name = "SH7751 IO", - .start = SH7751_PCI_IO_BASE, - .end = SH7751_PCI_IO_BASE + SH7751_PCI_IO_SIZE - 1, - .flags = IORESOURCE_IO -}; - -static struct resource sh7751_mem_resource = { - .name = "SH7751 mem", - .start = SH7751_PCI_MEMORY_BASE, - .end = SH7751_PCI_MEMORY_BASE + SH7751_PCI_MEM_SIZE - 1, - .flags = IORESOURCE_MEM -}; - -extern struct pci_ops sh7751_pci_ops; - -struct pci_channel board_pci_channels[] = { - { &sh7751_pci_ops, &sh7751_io_resource, &sh7751_mem_resource, 0, 0xff }, - { NULL, NULL, NULL, 0, 0 }, -}; - diff --git a/arch/sh/drivers/pci/Makefile b/arch/sh/drivers/pci/Makefile index fbebd73..e388a70 100644 --- a/arch/sh/drivers/pci/Makefile +++ b/arch/sh/drivers/pci/Makefile @@ -15,6 +15,7 @@ obj-$(CONFIG_CPU_SH5) += pci-sh5.o ops-sh5.o obj-$(CONFIG_SH_DREAMCAST) += ops-dreamcast.o fixups-dreamcast.o \ pci-dreamcast.o obj-$(CONFIG_SH_SECUREEDGE5410) += fixups-snapgear.o +obj-$(CONFIG_SH_7751_SOLUTION_ENGINE) += fixups-se7751.o obj-$(CONFIG_SH_RTS7751R2D) += fixups-rts7751r2d.o obj-$(CONFIG_SH_SH03) += fixups-sh03.o obj-$(CONFIG_SH_HIGHLANDER) += fixups-r7780rp.o diff --git a/arch/sh/drivers/pci/fixups-se7751.c b/arch/sh/drivers/pci/fixups-se7751.c new file mode 100644 index 0000000..475fa9f --- /dev/null +++ b/arch/sh/drivers/pci/fixups-se7751.c @@ -0,0 +1,111 @@ +#include +#include +#include +#include +#include +#include +#include "pci-sh4.h" + +int __init pcibios_map_platform_irq(u8 slot, u8 pin) +{ + switch (slot) { + case 0: return 13; + case 1: return 13; /* AMD Ethernet controller */ + case 2: return -1; + case 3: return -1; + case 4: return -1; + default: + printk("PCI: Bad IRQ mapping request for slot %d\n", slot); + return -1; + } +} + +#define PCIMCR_MRSET_OFF 0xBFFFFFFF +#define PCIMCR_RFSH_OFF 0xFFFFFFFB + +/* + * Only long word accesses of the PCIC's internal local registers and the + * configuration registers from the CPU is supported. + */ +#define PCIC_WRITE(x,v) writel((v), PCI_REG(x)) +#define PCIC_READ(x) readl(PCI_REG(x)) + +/* + * Description: This function sets up and initializes the pcic, sets + * up the BARS, maps the DRAM into the address space etc, etc. + */ +int pci_fixup_pcic(struct pci_channel *chan) +{ + unsigned long bcr1, wcr1, wcr2, wcr3, mcr; + unsigned short bcr2; + + /* + * Initialize the slave bus controller on the pcic. The values used + * here should not be hardcoded, but they should be taken from the bsc + * on the processor, to make this function as generic as possible. + * (i.e. Another sbc may usr different SDRAM timing settings -- in order + * for the pcic to work, its settings need to be exactly the same.) + */ + bcr1 = (*(volatile unsigned long*)(SH7751_BCR1)); + bcr2 = (*(volatile unsigned short*)(SH7751_BCR2)); + wcr1 = (*(volatile unsigned long*)(SH7751_WCR1)); + wcr2 = (*(volatile unsigned long*)(SH7751_WCR2)); + wcr3 = (*(volatile unsigned long*)(SH7751_WCR3)); + mcr = (*(volatile unsigned long*)(SH7751_MCR)); + + bcr1 = bcr1 | 0x00080000; /* Enable Bit 19, BREQEN */ + (*(volatile unsigned long*)(SH7751_BCR1)) = bcr1; + + bcr1 = bcr1 | 0x40080000; /* Enable Bit 19 BREQEN, set PCIC to slave */ + PCIC_WRITE(SH7751_PCIBCR1, bcr1); /* PCIC BCR1 */ + PCIC_WRITE(SH7751_PCIBCR2, bcr2); /* PCIC BCR2 */ + PCIC_WRITE(SH7751_PCIWCR1, wcr1); /* PCIC WCR1 */ + PCIC_WRITE(SH7751_PCIWCR2, wcr2); /* PCIC WCR2 */ + PCIC_WRITE(SH7751_PCIWCR3, wcr3); /* PCIC WCR3 */ + mcr = (mcr & PCIMCR_MRSET_OFF) & PCIMCR_RFSH_OFF; + PCIC_WRITE(SH7751_PCIMCR, mcr); /* PCIC MCR */ + + + /* Enable all interrupts, so we know what to fix */ + PCIC_WRITE(SH7751_PCIINTM, 0x0000c3ff); + PCIC_WRITE(SH7751_PCIAINTM, 0x0000380f); + + /* Set up standard PCI config registers */ + PCIC_WRITE(SH7751_PCICONF1, 0xF39000C7); /* Bus Master, Mem & I/O access */ + PCIC_WRITE(SH7751_PCICONF2, 0x00000000); /* PCI Class code & Revision ID */ + PCIC_WRITE(SH7751_PCICONF4, 0xab000001); /* PCI I/O address (local regs) */ + PCIC_WRITE(SH7751_PCICONF5, 0x0c000000); /* PCI MEM address (local RAM) */ + PCIC_WRITE(SH7751_PCICONF6, 0xd0000000); /* PCI MEM address (unused) */ + PCIC_WRITE(SH7751_PCICONF11, 0x35051054); /* PCI Subsystem ID & Vendor ID */ + PCIC_WRITE(SH7751_PCILSR0, 0x03f00000); /* MEM (full 64M exposed) */ + PCIC_WRITE(SH7751_PCILSR1, 0x00000000); /* MEM (unused) */ + PCIC_WRITE(SH7751_PCILAR0, 0x0c000000); /* MEM (direct map from PCI) */ + PCIC_WRITE(SH7751_PCILAR1, 0x00000000); /* MEM (unused) */ + + /* Now turn it on... */ + PCIC_WRITE(SH7751_PCICR, 0xa5000001); + + /* + * Set PCIMBR and PCIIOBR here, assuming a single window + * (16M MEM, 256K IO) is enough. If a larger space is + * needed, the readx/writex and inx/outx functions will + * have to do more (e.g. setting registers for each call). + */ + + /* + * Set the MBR so PCI address is one-to-one with window, + * meaning all calls go straight through... use BUG_ON to + * catch erroneous assumption. + */ + BUG_ON(chan->mem_resource->start != SH7751_PCI_MEMORY_BASE); + + PCIC_WRITE(SH7751_PCIMBR, chan->mem_resource->start); + + /* Set IOBR for window containing area specified in pci.h */ + PCIC_WRITE(SH7751_PCIIOBR, (chan->io_resource->start & SH7751_PCIIOBR_MASK)); + + /* All done, may as well say so... */ + printk("SH7751 PCI: Finished initialization of the PCI controller\n"); + + return 1; +} -- cgit v0.10.2 From 805fcc88999162b361ef0b0ce25782ef65f147d7 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Mon, 20 Apr 2009 21:46:42 +0900 Subject: sh: pci: Kill off the last remnants of the now unused pci-auto code. Signed-off-by: Paul Mundt diff --git a/arch/sh/drivers/pci/Kconfig b/arch/sh/drivers/pci/Kconfig index 1d53496..ea903a9 100644 --- a/arch/sh/drivers/pci/Kconfig +++ b/arch/sh/drivers/pci/Kconfig @@ -18,24 +18,6 @@ config SH_PCIDMA_NONCOHERENT bridge integrated with your SH CPU, refer carefully to the chip specs to see if you can say 'N' here. Otherwise, leave it as 'Y'. -# Temporary config option for transitioning off of PCI_AUTO config PCI_NEW def_bool y depends on PCI - -# This is also board-specific -config PCI_AUTO - bool - depends on PCI && !PCI_NEW - default y - -config PCI_AUTO_UPDATE_RESOURCES - bool - depends on PCI_AUTO - default y if !SH_DREAMCAST - help - Selecting this option will cause the PCI auto code to leave your - BAR values alone. Otherwise they will be updated automatically. If - for some reason, you have a board that simply refuses to work - with its resources updated beyond what they are when the device - is powered up, set this to N. Everyone else will want this as Y. diff --git a/arch/sh/drivers/pci/Makefile b/arch/sh/drivers/pci/Makefile index e388a70..a8350cc 100644 --- a/arch/sh/drivers/pci/Makefile +++ b/arch/sh/drivers/pci/Makefile @@ -2,7 +2,6 @@ # Makefile for the PCI specific kernel interface routines under Linux. # obj-y += pci-lib.o -obj-$(CONFIG_PCI_AUTO) += pci.o pci-auto.o obj-$(CONFIG_PCI_NEW) += pci-new.o obj-$(CONFIG_CPU_SUBTYPE_SH7751) += pci-sh7751.o ops-sh4.o diff --git a/arch/sh/drivers/pci/pci-auto.c b/arch/sh/drivers/pci/pci-auto.c deleted file mode 100644 index 1d715ec..0000000 --- a/arch/sh/drivers/pci/pci-auto.c +++ /dev/null @@ -1,546 +0,0 @@ -/* - * PCI autoconfiguration library - * - * Author: Matt Porter - * - * Copyright 2000, 2001 MontaVista Software Inc. - * Copyright 2001 Bradley D. LaRonde - * Copyright 2003 Paul Mundt - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ - -/* - * Modified for MIPS by Jun Sun, jsun@mvista.com - * - * . Simplify the interface between pci_auto and the rest: a single function. - * . Assign resources from low address to upper address. - * . change most int to u32. - * - * Further modified to include it as mips generic code, ppopov@mvista.com. - * - * 2001-10-26 Bradley D. LaRonde - * - Add a top_bus argument to the "early config" functions so that - * they can set a fake parent bus pointer to convince the underlying - * pci ops to use type 1 configuration for sub busses. - * - Set bridge base and limit registers correctly. - * - Align io and memory base properly before and after bridge setup. - * - Don't fall through to pci_setup_bars for bridge. - * - Reformat the debug output to look more like lspci's output. - * - * Cloned for SuperH by M. R. Brown, mrbrown@0xd6.org - * - * 2003-08-05 Paul Mundt - * - Don't update the BAR values on systems that already have valid addresses - * and don't want these updated for whatever reason, by way of a new config - * option check. However, we still read in the old BAR values so that they - * can still be reported through the debug output. - */ - -#include -#include -#include -#include - -#define DEBUG -#ifdef DEBUG -#define DBG(x...) printk(x) -#else -#define DBG(x...) -#endif - -/* - * These functions are used early on before PCI scanning is done - * and all of the pci_dev and pci_bus structures have been created. - */ -static struct pci_dev *fake_pci_dev(struct pci_channel *hose, - int top_bus, int busnr, int devfn) -{ - static struct pci_dev dev; - static struct pci_bus bus; - - dev.bus = &bus; - dev.sysdata = hose; - dev.devfn = devfn; - bus.number = busnr; - bus.ops = hose->pci_ops; - bus.sysdata = hose; - - if(busnr != top_bus) - /* Fake a parent bus structure. */ - bus.parent = &bus; - else - bus.parent = NULL; - - return &dev; -} - -#define EARLY_PCI_OP(rw, size, type) \ -static int early_##rw##_config_##size(struct pci_channel *hose, \ - int top_bus, int bus, int devfn, int offset, type value) \ -{ \ - return pci_##rw##_config_##size( \ - fake_pci_dev(hose, top_bus, bus, devfn), \ - offset, value); \ -} - -EARLY_PCI_OP(read, byte, u8 *) -EARLY_PCI_OP(read, word, u16 *) -EARLY_PCI_OP(read, dword, u32 *) -EARLY_PCI_OP(write, byte, u8) -EARLY_PCI_OP(write, word, u16) -EARLY_PCI_OP(write, dword, u32) - -static struct resource *io_resource_inuse; -static struct resource *mem_resource_inuse; - -static u32 pciauto_lower_iospc; -static u32 pciauto_upper_iospc; - -static u32 pciauto_lower_memspc; -static u32 pciauto_upper_memspc; - -static void __init -pciauto_setup_bars(struct pci_channel *hose, - int top_bus, - int current_bus, - int pci_devfn, - int bar_limit) -{ - u32 bar_response, bar_size, bar_value; - u32 bar, addr_mask, bar_nr = 0; - u32 * upper_limit; - u32 * lower_limit; - int found_mem64 = 0; - - for (bar = PCI_BASE_ADDRESS_0; bar <= bar_limit; bar+=4) { - u32 bar_addr; - - /* Read the old BAR value */ - early_read_config_dword(hose, top_bus, - current_bus, - pci_devfn, - bar, - &bar_addr); - - /* Tickle the BAR and get the response */ - early_write_config_dword(hose, top_bus, - current_bus, - pci_devfn, - bar, - 0xffffffff); - - early_read_config_dword(hose, top_bus, - current_bus, - pci_devfn, - bar, - &bar_response); - - /* - * Write the old BAR value back out, only update the BAR - * if we implicitly want resources to be updated, which - * is done by the generic code further down. -- PFM. - */ - early_write_config_dword(hose, top_bus, - current_bus, - pci_devfn, - bar, - bar_addr); - - /* If BAR is not implemented go to the next BAR */ - if (!bar_response) - continue; - - /* - * Workaround for a BAR that doesn't use its upper word, - * like the ALi 1535D+ PCI DC-97 Controller Modem (M5457). - * bdl - */ - if (!(bar_response & 0xffff0000)) - bar_response |= 0xffff0000; - -retry: - /* Check the BAR type and set our address mask */ - if (bar_response & PCI_BASE_ADDRESS_SPACE) { - addr_mask = PCI_BASE_ADDRESS_IO_MASK; - upper_limit = &pciauto_upper_iospc; - lower_limit = &pciauto_lower_iospc; - DBG(" I/O"); - } else { - if ((bar_response & PCI_BASE_ADDRESS_MEM_TYPE_MASK) == - PCI_BASE_ADDRESS_MEM_TYPE_64) - found_mem64 = 1; - - addr_mask = PCI_BASE_ADDRESS_MEM_MASK; - upper_limit = &pciauto_upper_memspc; - lower_limit = &pciauto_lower_memspc; - DBG(" Mem"); - } - - - /* Calculate requested size */ - bar_size = ~(bar_response & addr_mask) + 1; - - /* Allocate a base address */ - bar_value = ((*lower_limit - 1) & ~(bar_size - 1)) + bar_size; - - if ((bar_value + bar_size) > *upper_limit) { - if (bar_response & PCI_BASE_ADDRESS_SPACE) { - if (io_resource_inuse->child) { - io_resource_inuse = - io_resource_inuse->child; - pciauto_lower_iospc = - io_resource_inuse->start; - pciauto_upper_iospc = - io_resource_inuse->end + 1; - goto retry; - } - - } else { - if (mem_resource_inuse->child) { - mem_resource_inuse = - mem_resource_inuse->child; - pciauto_lower_memspc = - mem_resource_inuse->start; - pciauto_upper_memspc = - mem_resource_inuse->end + 1; - goto retry; - } - } - DBG(" unavailable -- skipping, value %x size %x\n", - bar_value, bar_size); - continue; - } - - if (bar_value < *lower_limit || (bar_value + bar_size) >= *upper_limit) { - DBG(" unavailable -- skipping, value %x size %x\n", - bar_value, bar_size); - continue; - } - -#ifdef CONFIG_PCI_AUTO_UPDATE_RESOURCES - /* Write it out and update our limit */ - early_write_config_dword(hose, top_bus, current_bus, pci_devfn, - bar, bar_value); -#endif - - *lower_limit = bar_value + bar_size; - - /* - * If we are a 64-bit decoder then increment to the - * upper 32 bits of the bar and force it to locate - * in the lower 4GB of memory. - */ - if (found_mem64) { - bar += 4; - early_write_config_dword(hose, top_bus, - current_bus, - pci_devfn, - bar, - 0x00000000); - } - - DBG(" at 0x%.8x [size=0x%x]\n", bar_value, bar_size); - - bar_nr++; - } - -} - -static void __init -pciauto_prescan_setup_bridge(struct pci_channel *hose, - int top_bus, - int current_bus, - int pci_devfn, - int sub_bus) -{ - /* Configure bus number registers */ - early_write_config_byte(hose, top_bus, current_bus, pci_devfn, - PCI_PRIMARY_BUS, current_bus); - early_write_config_byte(hose, top_bus, current_bus, pci_devfn, - PCI_SECONDARY_BUS, sub_bus + 1); - early_write_config_byte(hose, top_bus, current_bus, pci_devfn, - PCI_SUBORDINATE_BUS, 0xff); - - /* Align memory and I/O to 1MB and 4KB boundaries. */ - pciauto_lower_memspc = (pciauto_lower_memspc + (0x100000 - 1)) - & ~(0x100000 - 1); - pciauto_lower_iospc = (pciauto_lower_iospc + (0x1000 - 1)) - & ~(0x1000 - 1); - - /* Set base (lower limit) of address range behind bridge. */ - early_write_config_word(hose, top_bus, current_bus, pci_devfn, - PCI_MEMORY_BASE, pciauto_lower_memspc >> 16); - early_write_config_byte(hose, top_bus, current_bus, pci_devfn, - PCI_IO_BASE, (pciauto_lower_iospc & 0x0000f000) >> 8); - early_write_config_word(hose, top_bus, current_bus, pci_devfn, - PCI_IO_BASE_UPPER16, pciauto_lower_iospc >> 16); - - /* We don't support prefetchable memory for now, so disable */ - early_write_config_word(hose, top_bus, current_bus, pci_devfn, - PCI_PREF_MEMORY_BASE, 0); - early_write_config_word(hose, top_bus, current_bus, pci_devfn, - PCI_PREF_MEMORY_LIMIT, 0); -} - -static void __init -pciauto_postscan_setup_bridge(struct pci_channel *hose, - int top_bus, - int current_bus, - int pci_devfn, - int sub_bus) -{ - u32 temp; - - /* - * [jsun] we always bump up baselines a little, so that if there - * nothing behind P2P bridge, we don't wind up overlapping IO/MEM - * spaces. - */ - pciauto_lower_memspc += 1; - pciauto_lower_iospc += 1; - - /* Configure bus number registers */ - early_write_config_byte(hose, top_bus, current_bus, pci_devfn, - PCI_SUBORDINATE_BUS, sub_bus); - - /* Set upper limit of address range behind bridge. */ - early_write_config_word(hose, top_bus, current_bus, pci_devfn, - PCI_MEMORY_LIMIT, pciauto_lower_memspc >> 16); - early_write_config_byte(hose, top_bus, current_bus, pci_devfn, - PCI_IO_LIMIT, (pciauto_lower_iospc & 0x0000f000) >> 8); - early_write_config_word(hose, top_bus, current_bus, pci_devfn, - PCI_IO_LIMIT_UPPER16, pciauto_lower_iospc >> 16); - - /* Align memory and I/O to 1MB and 4KB boundaries. */ - pciauto_lower_memspc = (pciauto_lower_memspc + (0x100000 - 1)) - & ~(0x100000 - 1); - pciauto_lower_iospc = (pciauto_lower_iospc + (0x1000 - 1)) - & ~(0x1000 - 1); - - /* Enable memory and I/O accesses, enable bus master */ - early_read_config_dword(hose, top_bus, current_bus, pci_devfn, - PCI_COMMAND, &temp); - early_write_config_dword(hose, top_bus, current_bus, pci_devfn, - PCI_COMMAND, temp | PCI_COMMAND_IO | PCI_COMMAND_MEMORY - | PCI_COMMAND_MASTER); -} - -static void __init -pciauto_prescan_setup_cardbus_bridge(struct pci_channel *hose, - int top_bus, - int current_bus, - int pci_devfn, - int sub_bus) -{ - /* Configure bus number registers */ - early_write_config_byte(hose, top_bus, current_bus, pci_devfn, - PCI_PRIMARY_BUS, current_bus); - early_write_config_byte(hose, top_bus, current_bus, pci_devfn, - PCI_SECONDARY_BUS, sub_bus + 1); - early_write_config_byte(hose, top_bus, current_bus, pci_devfn, - PCI_SUBORDINATE_BUS, 0xff); - - /* Align memory and I/O to 4KB and 4 byte boundaries. */ - pciauto_lower_memspc = (pciauto_lower_memspc + (0x1000 - 1)) - & ~(0x1000 - 1); - pciauto_lower_iospc = (pciauto_lower_iospc + (0x4 - 1)) - & ~(0x4 - 1); - - early_write_config_dword(hose, top_bus, current_bus, pci_devfn, - PCI_CB_MEMORY_BASE_0, pciauto_lower_memspc); - early_write_config_dword(hose, top_bus, current_bus, pci_devfn, - PCI_CB_IO_BASE_0, pciauto_lower_iospc); -} - -static void __init -pciauto_postscan_setup_cardbus_bridge(struct pci_channel *hose, - int top_bus, - int current_bus, - int pci_devfn, - int sub_bus) -{ - u32 temp; - - /* - * [jsun] we always bump up baselines a little, so that if there - * nothing behind P2P bridge, we don't wind up overlapping IO/MEM - * spaces. - */ - pciauto_lower_memspc += 1; - pciauto_lower_iospc += 1; - - /* - * Configure subordinate bus number. The PCI subsystem - * bus scan will renumber buses (reserving three additional - * for this PCI<->CardBus bridge for the case where a CardBus - * adapter contains a P2P or CB2CB bridge. - */ - - early_write_config_byte(hose, top_bus, current_bus, pci_devfn, - PCI_SUBORDINATE_BUS, sub_bus); - - /* - * Reserve an additional 4MB for mem space and 16KB for - * I/O space. This should cover any additional space - * requirement of unusual CardBus devices with - * additional bridges that can consume more address space. - * - * Although pcmcia-cs currently will reprogram bridge - * windows, the goal is to add an option to leave them - * alone and use the bridge window ranges as the regions - * that are searched for free resources upon hot-insertion - * of a device. This will allow a PCI<->CardBus bridge - * configured by this routine to happily live behind a - * P2P bridge in a system. - */ - /* Align memory and I/O to 4KB and 4 byte boundaries. */ - pciauto_lower_memspc = (pciauto_lower_memspc + (0x1000 - 1)) - & ~(0x1000 - 1); - pciauto_lower_iospc = (pciauto_lower_iospc + (0x4 - 1)) - & ~(0x4 - 1); - /* Set up memory and I/O filter limits, assume 32-bit I/O space */ - early_write_config_dword(hose, top_bus, current_bus, pci_devfn, - PCI_CB_MEMORY_LIMIT_0, pciauto_lower_memspc - 1); - early_write_config_dword(hose, top_bus, current_bus, pci_devfn, - PCI_CB_IO_LIMIT_0, pciauto_lower_iospc - 1); - - /* Enable memory and I/O accesses, enable bus master */ - early_read_config_dword(hose, top_bus, current_bus, pci_devfn, - PCI_COMMAND, &temp); - early_write_config_dword(hose, top_bus, current_bus, pci_devfn, - PCI_COMMAND, temp | PCI_COMMAND_IO | PCI_COMMAND_MEMORY | - PCI_COMMAND_MASTER); -} - -#define PCIAUTO_IDE_MODE_MASK 0x05 - -static int __init -pciauto_bus_scan(struct pci_channel *hose, int top_bus, int current_bus) -{ - int sub_bus; - u32 pci_devfn, pci_class, cmdstat, found_multi=0; - unsigned short vid, did; - unsigned char header_type; - int devfn_start = 0; - int devfn_stop = 0xff; - - sub_bus = current_bus; - - if (hose->first_devfn) - devfn_start = hose->first_devfn; - if (hose->last_devfn) - devfn_stop = hose->last_devfn; - - for (pci_devfn=devfn_start; pci_devfn> 16, vid, did); - if (pci_class & 0xff) - DBG(" (rev %.2x)", pci_class & 0xff); - DBG("\n"); - - if ((pci_class >> 16) == PCI_CLASS_BRIDGE_PCI) { - DBG(" Bridge: primary=%.2x, secondary=%.2x\n", - current_bus, sub_bus + 1); - pciauto_prescan_setup_bridge(hose, top_bus, current_bus, - pci_devfn, sub_bus); - DBG("Scanning sub bus %.2x, I/O 0x%.8x, Mem 0x%.8x\n", - sub_bus + 1, - pciauto_lower_iospc, pciauto_lower_memspc); - sub_bus = pciauto_bus_scan(hose, top_bus, sub_bus+1); - DBG("Back to bus %.2x\n", current_bus); - pciauto_postscan_setup_bridge(hose, top_bus, current_bus, - pci_devfn, sub_bus); - continue; - } else if ((pci_class >> 16) == PCI_CLASS_BRIDGE_CARDBUS) { - DBG(" CARDBUS Bridge: primary=%.2x, secondary=%.2x\n", - current_bus, sub_bus + 1); - DBG("PCI Autoconfig: Found CardBus bridge, device %d function %d\n", PCI_SLOT(pci_devfn), PCI_FUNC(pci_devfn)); - /* Place CardBus Socket/ExCA registers */ - pciauto_setup_bars(hose, top_bus, current_bus, pci_devfn, PCI_BASE_ADDRESS_0); - - pciauto_prescan_setup_cardbus_bridge(hose, top_bus, - current_bus, pci_devfn, sub_bus); - - DBG("Scanning sub bus %.2x, I/O 0x%.8x, Mem 0x%.8x\n", - sub_bus + 1, - pciauto_lower_iospc, pciauto_lower_memspc); - sub_bus = pciauto_bus_scan(hose, top_bus, sub_bus+1); - DBG("Back to bus %.2x, sub_bus is %x\n", current_bus, sub_bus); - pciauto_postscan_setup_cardbus_bridge(hose, top_bus, - current_bus, pci_devfn, sub_bus); - continue; - } else if ((pci_class >> 16) == PCI_CLASS_STORAGE_IDE) { - - unsigned char prg_iface; - - early_read_config_byte(hose, top_bus, current_bus, - pci_devfn, PCI_CLASS_PROG, &prg_iface); - if (!(prg_iface & PCIAUTO_IDE_MODE_MASK)) { - DBG("Skipping legacy mode IDE controller\n"); - continue; - } - } - - /* - * Found a peripheral, enable some standard - * settings - */ - early_read_config_dword(hose, top_bus, current_bus, pci_devfn, - PCI_COMMAND, &cmdstat); - early_write_config_dword(hose, top_bus, current_bus, pci_devfn, - PCI_COMMAND, cmdstat | PCI_COMMAND_IO | - PCI_COMMAND_MEMORY | - PCI_COMMAND_MASTER); - early_write_config_byte(hose, top_bus, current_bus, pci_devfn, - PCI_LATENCY_TIMER, 0x80); - - /* Allocate PCI I/O and/or memory space */ - pciauto_setup_bars(hose, top_bus, current_bus, pci_devfn, PCI_BASE_ADDRESS_5); - } - return sub_bus; -} - -int __init -pciauto_assign_resources(int busno, struct pci_channel *hose) -{ - /* setup resource limits */ - io_resource_inuse = hose->io_resource; - mem_resource_inuse = hose->mem_resource; - - pciauto_lower_iospc = io_resource_inuse->start; - pciauto_upper_iospc = io_resource_inuse->end + 1; - pciauto_lower_memspc = mem_resource_inuse->start; - pciauto_upper_memspc = mem_resource_inuse->end + 1; - DBG("Autoconfig PCI channel 0x%p\n", hose); - DBG("Scanning bus %.2x, I/O 0x%.8x:0x%.8x, Mem 0x%.8x:0x%.8x\n", - busno, pciauto_lower_iospc, pciauto_upper_iospc, - pciauto_lower_memspc, pciauto_upper_memspc); - - return pciauto_bus_scan(hose, busno, busno); -} diff --git a/arch/sh/drivers/pci/pci.c b/arch/sh/drivers/pci/pci.c deleted file mode 100644 index 8c332b2..0000000 --- a/arch/sh/drivers/pci/pci.c +++ /dev/null @@ -1,75 +0,0 @@ -/* - * arch/sh/drivers/pci/pci.c - * - * Copyright (c) 2002 M. R. Brown - * Copyright (c) 2004 - 2006 Paul Mundt - * - * These functions are collected here to reduce duplication of common - * code amongst the many platform-specific PCI support code files. - * - * These routines require the following board-specific routines: - * void pcibios_fixup_irqs(); - * - * See include/asm-sh/pci.h for more information. - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ -#include -#include -#include -#include -#include - -static int __init pcibios_init(void) -{ - struct pci_channel *p; - struct pci_bus *bus; - int busno; - - /* init channels */ - busno = 0; - for (p = board_pci_channels; p->init; p++) { - if (p->init(p) == 0) - p->enabled = 1; - else - pr_err("Unable to init pci channel %d\n", busno); - busno++; - } - -#ifdef CONFIG_PCI_AUTO - /* assign resources */ - busno = 0; - for (p = board_pci_channels; p->init; p++) - if (p->enabled) - busno = pciauto_assign_resources(busno, p) + 1; -#endif - - /* scan the buses */ - busno = 0; - for (p = board_pci_channels; p->init; p++) { - if (p->enabled) { - bus = pci_scan_bus(busno, p->pci_ops, p); - busno = bus->subordinate + 1; - } - } - - pci_fixup_irqs(pci_common_swizzle, pcibios_map_platform_irq); - - dma_debug_add_bus(&pci_bus_type); - - return 0; -} -subsys_initcall(pcibios_init); - -/* - * Called after each bus is probed, but before its children - * are examined. - */ -void __devinit __weak pcibios_fixup_bus(struct pci_bus *bus) -{ - pci_read_bridge_bases(bus); -} - -EXPORT_SYMBOL(board_pci_channels); diff --git a/arch/sh/include/asm/pci.h b/arch/sh/include/asm/pci.h index f36c789..f9101215 100644 --- a/arch/sh/include/asm/pci.h +++ b/arch/sh/include/asm/pci.h @@ -19,8 +19,6 @@ struct pci_channel { struct pci_channel *next; - int (*init)(struct pci_channel *chan); - struct pci_ops *pci_ops; struct resource *io_resource; struct resource *mem_resource; @@ -28,20 +26,11 @@ struct pci_channel { unsigned long io_offset; unsigned long mem_offset; - int first_devfn; - int last_devfn; - int enabled; - unsigned long reg_base; unsigned long io_map_base; }; -/* - * Each board initializes this array and terminates it with a NULL entry. - */ -extern struct pci_channel board_pci_channels[]; - extern void register_pci_controller(struct pci_channel *hose); extern unsigned long PCIBIOS_MIN_IO, PCIBIOS_MIN_MEM; @@ -122,13 +111,8 @@ static inline void pci_dma_burst_advice(struct pci_dev *pdev, #endif /* Board-specific fixup routines. */ -int pcibios_init_platform(void); int pcibios_map_platform_irq(struct pci_dev *dev, u8 slot, u8 pin); -#ifdef CONFIG_PCI_AUTO -int pciauto_assign_resources(int busno, struct pci_channel *hose); -#endif - extern void pcibios_resource_to_bus(struct pci_dev *dev, struct pci_bus_region *region, struct resource *res); -- cgit v0.10.2 From 35bcfffd86aac933205fbf8401e3e7e4dde68264 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Mon, 20 Apr 2009 21:51:19 +0900 Subject: sh: pci: Roll pci-lib in to pci-new. Now that the pci-auto cruft is gone, pci-lib can go away. Roll it back in to pci-new.c where it originally split off from. Signed-off-by: Paul Mundt diff --git a/arch/sh/drivers/pci/Makefile b/arch/sh/drivers/pci/Makefile index a8350cc..eacac7f 100644 --- a/arch/sh/drivers/pci/Makefile +++ b/arch/sh/drivers/pci/Makefile @@ -1,7 +1,6 @@ # # Makefile for the PCI specific kernel interface routines under Linux. # -obj-y += pci-lib.o obj-$(CONFIG_PCI_NEW) += pci-new.o obj-$(CONFIG_CPU_SUBTYPE_SH7751) += pci-sh7751.o ops-sh4.o diff --git a/arch/sh/drivers/pci/pci-lib.c b/arch/sh/drivers/pci/pci-lib.c deleted file mode 100644 index f072aca..0000000 --- a/arch/sh/drivers/pci/pci-lib.c +++ /dev/null @@ -1,219 +0,0 @@ -#include -#include -#include -#include -#include - -unsigned long PCIBIOS_MIN_IO = 0x0000; -unsigned long PCIBIOS_MIN_MEM = 0; - -/* - * We need to avoid collisions with `mirrored' VGA ports - * and other strange ISA hardware, so we always want the - * addresses to be allocated in the 0x000-0x0ff region - * modulo 0x400. - */ -void pcibios_align_resource(void *data, struct resource *res, - resource_size_t size, resource_size_t align) -{ - struct pci_dev *dev = data; - struct pci_channel *chan = dev->sysdata; - resource_size_t start = res->start; - - if (res->flags & IORESOURCE_IO) { - if (start < PCIBIOS_MIN_IO + chan->io_resource->start) - start = PCIBIOS_MIN_IO + chan->io_resource->start; - - /* - * Put everything into 0x00-0xff region modulo 0x400. - */ - if (start & 0x300) { - start = (start + 0x3ff) & ~0x3ff; - res->start = start; - } - } else if (res->flags & IORESOURCE_MEM) { - if (start < PCIBIOS_MIN_MEM + chan->mem_resource->start) - start = PCIBIOS_MIN_MEM + chan->mem_resource->start; - } - - res->start = start; -} - -void pcibios_resource_to_bus(struct pci_dev *dev, struct pci_bus_region *region, - struct resource *res) -{ - struct pci_channel *hose = dev->sysdata; - unsigned long offset = 0; - - if (res->flags & IORESOURCE_IO) - offset = hose->io_offset; - else if (res->flags & IORESOURCE_MEM) - offset = hose->mem_offset; - - region->start = res->start - offset; - region->end = res->end - offset; -} - -void __devinit -pcibios_bus_to_resource(struct pci_dev *dev, struct resource *res, - struct pci_bus_region *region) -{ - struct pci_channel *hose = dev->sysdata; - unsigned long offset = 0; - - if (res->flags & IORESOURCE_IO) - offset = hose->io_offset; - else if (res->flags & IORESOURCE_MEM) - offset = hose->mem_offset; - - res->start = region->start + offset; - res->end = region->end + offset; -} - -int pcibios_enable_device(struct pci_dev *dev, int mask) -{ - u16 cmd, old_cmd; - int idx; - struct resource *r; - - pci_read_config_word(dev, PCI_COMMAND, &cmd); - old_cmd = cmd; - for (idx=0; idx < PCI_NUM_RESOURCES; idx++) { - /* Only set up the requested stuff */ - if (!(mask & (1<resource[idx]; - if (!(r->flags & (IORESOURCE_IO | IORESOURCE_MEM))) - continue; - if ((idx == PCI_ROM_RESOURCE) && - (!(r->flags & IORESOURCE_ROM_ENABLE))) - continue; - if (!r->start && r->end) { - printk(KERN_ERR "PCI: Device %s not available " - "because of resource collisions\n", - pci_name(dev)); - return -EINVAL; - } - if (r->flags & IORESOURCE_IO) - cmd |= PCI_COMMAND_IO; - if (r->flags & IORESOURCE_MEM) - cmd |= PCI_COMMAND_MEMORY; - } - if (cmd != old_cmd) { - printk("PCI: Enabling device %s (%04x -> %04x)\n", - pci_name(dev), old_cmd, cmd); - pci_write_config_word(dev, PCI_COMMAND, cmd); - } - return 0; -} - -/* - * If we set up a device for bus mastering, we need to check and set - * the latency timer as it may not be properly set. - */ -static unsigned int pcibios_max_latency = 255; - -void pcibios_set_master(struct pci_dev *dev) -{ - u8 lat; - pci_read_config_byte(dev, PCI_LATENCY_TIMER, &lat); - if (lat < 16) - lat = (64 <= pcibios_max_latency) ? 64 : pcibios_max_latency; - else if (lat > pcibios_max_latency) - lat = pcibios_max_latency; - else - return; - printk(KERN_INFO "PCI: Setting latency timer of device %s to %d\n", - pci_name(dev), lat); - pci_write_config_byte(dev, PCI_LATENCY_TIMER, lat); -} - -void __init pcibios_update_irq(struct pci_dev *dev, int irq) -{ - pci_write_config_byte(dev, PCI_INTERRUPT_LINE, irq); -} - -char * __devinit pcibios_setup(char *str) -{ - return str; -} - -int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma, - enum pci_mmap_state mmap_state, int write_combine) -{ - /* - * I/O space can be accessed via normal processor loads and stores on - * this platform but for now we elect not to do this and portable - * drivers should not do this anyway. - */ - if (mmap_state == pci_mmap_io) - return -EINVAL; - - /* - * Ignore write-combine; for now only return uncached mappings. - */ - vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot); - - return remap_pfn_range(vma, vma->vm_start, vma->vm_pgoff, - vma->vm_end - vma->vm_start, - vma->vm_page_prot); -} - -static void __iomem *ioport_map_pci(struct pci_dev *dev, - unsigned long port, unsigned int nr) -{ - struct pci_channel *chan = dev->sysdata; - - if (!chan->io_map_base) - chan->io_map_base = generic_io_base; - - return (void __iomem *)(chan->io_map_base + port); -} - -void __iomem *pci_iomap(struct pci_dev *dev, int bar, unsigned long maxlen) -{ - resource_size_t start = pci_resource_start(dev, bar); - resource_size_t len = pci_resource_len(dev, bar); - unsigned long flags = pci_resource_flags(dev, bar); - - if (unlikely(!len || !start)) - return NULL; - if (maxlen && len > maxlen) - len = maxlen; - - if (flags & IORESOURCE_IO) - return ioport_map_pci(dev, start, len); - - /* - * Presently the IORESOURCE_MEM case is a bit special, most - * SH7751 style PCI controllers have PCI memory at a fixed - * location in the address space where no remapping is desired. - * With the IORESOURCE_MEM case more care has to be taken - * to inhibit page table mapping for legacy cores, but this is - * punted off to __ioremap(). - * -- PFM. - */ - if (flags & IORESOURCE_MEM) { - if (flags & IORESOURCE_CACHEABLE) - return ioremap(start, len); - - return ioremap_nocache(start, len); - } - - return NULL; -} -EXPORT_SYMBOL(pci_iomap); - -void pci_iounmap(struct pci_dev *dev, void __iomem *addr) -{ - iounmap(addr); -} -EXPORT_SYMBOL(pci_iounmap); - -#ifdef CONFIG_HOTPLUG -EXPORT_SYMBOL(pcibios_resource_to_bus); -EXPORT_SYMBOL(pcibios_bus_to_resource); -EXPORT_SYMBOL(PCIBIOS_MIN_IO); -EXPORT_SYMBOL(PCIBIOS_MIN_MEM); -#endif diff --git a/arch/sh/drivers/pci/pci-new.c b/arch/sh/drivers/pci/pci-new.c index 8c0b136..54d77cb 100644 --- a/arch/sh/drivers/pci/pci-new.c +++ b/arch/sh/drivers/pci/pci-new.c @@ -1,20 +1,28 @@ /* * New-style PCI core. * - * Copyright (c) 2002 M. R. Brown * Copyright (c) 2004 - 2009 Paul Mundt + * Copyright (c) 2002 M. R. Brown + * + * Modelled after arch/mips/pci/pci.c: + * Copyright (C) 2003, 04 Ralf Baechle (ralf@linux-mips.org) * * This file is subject to the terms and conditions of the GNU General Public * License. See the file "COPYING" in the main directory of this archive * for more details. */ #include +#include #include #include +#include #include #include #include +unsigned long PCIBIOS_MIN_IO = 0x0000; +unsigned long PCIBIOS_MIN_MEM = 0; + /* * The PCI controller list. */ @@ -27,9 +35,6 @@ static void __devinit pcibios_scanbus(struct pci_channel *hose) static int next_busno; struct pci_bus *bus; - /* Catch botched conversion attempts */ - BUG_ON(hose->init); - bus = pci_scan_bus(next_busno, hose->pci_ops, hose); if (bus) { next_busno = bus->subordinate + 1; @@ -128,7 +133,7 @@ static void pcibios_fixup_device_resources(struct pci_dev *dev, * Called after each bus is probed, but before its children * are examined. */ -void __devinit __weak pcibios_fixup_bus(struct pci_bus *bus) +void __devinit pcibios_fixup_bus(struct pci_bus *bus) { struct pci_dev *dev = bus->self; struct list_head *ln; @@ -146,3 +151,214 @@ void __devinit __weak pcibios_fixup_bus(struct pci_bus *bus) pcibios_fixup_device_resources(dev, bus); } } + +/* + * We need to avoid collisions with `mirrored' VGA ports + * and other strange ISA hardware, so we always want the + * addresses to be allocated in the 0x000-0x0ff region + * modulo 0x400. + */ +void pcibios_align_resource(void *data, struct resource *res, + resource_size_t size, resource_size_t align) +{ + struct pci_dev *dev = data; + struct pci_channel *chan = dev->sysdata; + resource_size_t start = res->start; + + if (res->flags & IORESOURCE_IO) { + if (start < PCIBIOS_MIN_IO + chan->io_resource->start) + start = PCIBIOS_MIN_IO + chan->io_resource->start; + + /* + * Put everything into 0x00-0xff region modulo 0x400. + */ + if (start & 0x300) { + start = (start + 0x3ff) & ~0x3ff; + res->start = start; + } + } else if (res->flags & IORESOURCE_MEM) { + if (start < PCIBIOS_MIN_MEM + chan->mem_resource->start) + start = PCIBIOS_MIN_MEM + chan->mem_resource->start; + } + + res->start = start; +} + +void pcibios_resource_to_bus(struct pci_dev *dev, struct pci_bus_region *region, + struct resource *res) +{ + struct pci_channel *hose = dev->sysdata; + unsigned long offset = 0; + + if (res->flags & IORESOURCE_IO) + offset = hose->io_offset; + else if (res->flags & IORESOURCE_MEM) + offset = hose->mem_offset; + + region->start = res->start - offset; + region->end = res->end - offset; +} + +void __devinit +pcibios_bus_to_resource(struct pci_dev *dev, struct resource *res, + struct pci_bus_region *region) +{ + struct pci_channel *hose = dev->sysdata; + unsigned long offset = 0; + + if (res->flags & IORESOURCE_IO) + offset = hose->io_offset; + else if (res->flags & IORESOURCE_MEM) + offset = hose->mem_offset; + + res->start = region->start + offset; + res->end = region->end + offset; +} + +int pcibios_enable_device(struct pci_dev *dev, int mask) +{ + u16 cmd, old_cmd; + int idx; + struct resource *r; + + pci_read_config_word(dev, PCI_COMMAND, &cmd); + old_cmd = cmd; + for (idx=0; idx < PCI_NUM_RESOURCES; idx++) { + /* Only set up the requested stuff */ + if (!(mask & (1<resource[idx]; + if (!(r->flags & (IORESOURCE_IO | IORESOURCE_MEM))) + continue; + if ((idx == PCI_ROM_RESOURCE) && + (!(r->flags & IORESOURCE_ROM_ENABLE))) + continue; + if (!r->start && r->end) { + printk(KERN_ERR "PCI: Device %s not available " + "because of resource collisions\n", + pci_name(dev)); + return -EINVAL; + } + if (r->flags & IORESOURCE_IO) + cmd |= PCI_COMMAND_IO; + if (r->flags & IORESOURCE_MEM) + cmd |= PCI_COMMAND_MEMORY; + } + if (cmd != old_cmd) { + printk("PCI: Enabling device %s (%04x -> %04x)\n", + pci_name(dev), old_cmd, cmd); + pci_write_config_word(dev, PCI_COMMAND, cmd); + } + return 0; +} + +/* + * If we set up a device for bus mastering, we need to check and set + * the latency timer as it may not be properly set. + */ +static unsigned int pcibios_max_latency = 255; + +void pcibios_set_master(struct pci_dev *dev) +{ + u8 lat; + pci_read_config_byte(dev, PCI_LATENCY_TIMER, &lat); + if (lat < 16) + lat = (64 <= pcibios_max_latency) ? 64 : pcibios_max_latency; + else if (lat > pcibios_max_latency) + lat = pcibios_max_latency; + else + return; + printk(KERN_INFO "PCI: Setting latency timer of device %s to %d\n", + pci_name(dev), lat); + pci_write_config_byte(dev, PCI_LATENCY_TIMER, lat); +} + +void __init pcibios_update_irq(struct pci_dev *dev, int irq) +{ + pci_write_config_byte(dev, PCI_INTERRUPT_LINE, irq); +} + +char * __devinit pcibios_setup(char *str) +{ + return str; +} + +int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma, + enum pci_mmap_state mmap_state, int write_combine) +{ + /* + * I/O space can be accessed via normal processor loads and stores on + * this platform but for now we elect not to do this and portable + * drivers should not do this anyway. + */ + if (mmap_state == pci_mmap_io) + return -EINVAL; + + /* + * Ignore write-combine; for now only return uncached mappings. + */ + vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot); + + return remap_pfn_range(vma, vma->vm_start, vma->vm_pgoff, + vma->vm_end - vma->vm_start, + vma->vm_page_prot); +} + +static void __iomem *ioport_map_pci(struct pci_dev *dev, + unsigned long port, unsigned int nr) +{ + struct pci_channel *chan = dev->sysdata; + + if (!chan->io_map_base) + chan->io_map_base = generic_io_base; + + return (void __iomem *)(chan->io_map_base + port); +} + +void __iomem *pci_iomap(struct pci_dev *dev, int bar, unsigned long maxlen) +{ + resource_size_t start = pci_resource_start(dev, bar); + resource_size_t len = pci_resource_len(dev, bar); + unsigned long flags = pci_resource_flags(dev, bar); + + if (unlikely(!len || !start)) + return NULL; + if (maxlen && len > maxlen) + len = maxlen; + + if (flags & IORESOURCE_IO) + return ioport_map_pci(dev, start, len); + + /* + * Presently the IORESOURCE_MEM case is a bit special, most + * SH7751 style PCI controllers have PCI memory at a fixed + * location in the address space where no remapping is desired. + * With the IORESOURCE_MEM case more care has to be taken + * to inhibit page table mapping for legacy cores, but this is + * punted off to __ioremap(). + * -- PFM. + */ + if (flags & IORESOURCE_MEM) { + if (flags & IORESOURCE_CACHEABLE) + return ioremap(start, len); + + return ioremap_nocache(start, len); + } + + return NULL; +} +EXPORT_SYMBOL(pci_iomap); + +void pci_iounmap(struct pci_dev *dev, void __iomem *addr) +{ + iounmap(addr); +} +EXPORT_SYMBOL(pci_iounmap); + +#ifdef CONFIG_HOTPLUG +EXPORT_SYMBOL(pcibios_resource_to_bus); +EXPORT_SYMBOL(pcibios_bus_to_resource); +EXPORT_SYMBOL(PCIBIOS_MIN_IO); +EXPORT_SYMBOL(PCIBIOS_MIN_MEM); +#endif -- cgit v0.10.2 From cf242007a1eb29dcf93d1cb34713ec9b3f4a0e1b Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Mon, 20 Apr 2009 21:53:33 +0900 Subject: sh: pci: Rename pci-new.c to pci.c. pci-new.c is now in a state to replace the old pci.c, rename it accordingly. Signed-off-by: Paul Mundt diff --git a/arch/sh/drivers/pci/Kconfig b/arch/sh/drivers/pci/Kconfig index ea903a9..e8db585 100644 --- a/arch/sh/drivers/pci/Kconfig +++ b/arch/sh/drivers/pci/Kconfig @@ -17,7 +17,3 @@ config SH_PCIDMA_NONCOHERENT code will not have to flush the CPU's caches. If you have a PCI host bridge integrated with your SH CPU, refer carefully to the chip specs to see if you can say 'N' here. Otherwise, leave it as 'Y'. - -config PCI_NEW - def_bool y - depends on PCI diff --git a/arch/sh/drivers/pci/Makefile b/arch/sh/drivers/pci/Makefile index eacac7f..d2ffc47 100644 --- a/arch/sh/drivers/pci/Makefile +++ b/arch/sh/drivers/pci/Makefile @@ -1,7 +1,7 @@ # # Makefile for the PCI specific kernel interface routines under Linux. # -obj-$(CONFIG_PCI_NEW) += pci-new.o +obj-y += pci.o obj-$(CONFIG_CPU_SUBTYPE_SH7751) += pci-sh7751.o ops-sh4.o obj-$(CONFIG_CPU_SUBTYPE_SH7751R) += pci-sh7751.o ops-sh4.o diff --git a/arch/sh/drivers/pci/pci-new.c b/arch/sh/drivers/pci/pci-new.c deleted file mode 100644 index 54d77cb..0000000 --- a/arch/sh/drivers/pci/pci-new.c +++ /dev/null @@ -1,364 +0,0 @@ -/* - * New-style PCI core. - * - * Copyright (c) 2004 - 2009 Paul Mundt - * Copyright (c) 2002 M. R. Brown - * - * Modelled after arch/mips/pci/pci.c: - * Copyright (C) 2003, 04 Ralf Baechle (ralf@linux-mips.org) - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ -#include -#include -#include -#include -#include -#include -#include -#include - -unsigned long PCIBIOS_MIN_IO = 0x0000; -unsigned long PCIBIOS_MIN_MEM = 0; - -/* - * The PCI controller list. - */ -static struct pci_channel *hose_head, **hose_tail = &hose_head; - -static int pci_initialized; - -static void __devinit pcibios_scanbus(struct pci_channel *hose) -{ - static int next_busno; - struct pci_bus *bus; - - bus = pci_scan_bus(next_busno, hose->pci_ops, hose); - if (bus) { - next_busno = bus->subordinate + 1; - /* Don't allow 8-bit bus number overflow inside the hose - - reserve some space for bridges. */ - if (next_busno > 224) - next_busno = 0; - - pci_bus_size_bridges(bus); - pci_bus_assign_resources(bus); - pci_enable_bridges(bus); - } -} - -static DEFINE_MUTEX(pci_scan_mutex); - -void __devinit register_pci_controller(struct pci_channel *hose) -{ - if (request_resource(&iomem_resource, hose->mem_resource) < 0) - goto out; - if (request_resource(&ioport_resource, hose->io_resource) < 0) { - release_resource(hose->mem_resource); - goto out; - } - - *hose_tail = hose; - hose_tail = &hose->next; - - /* - * Do not panic here but later - this might hapen before console init. - */ - if (!hose->io_map_base) { - printk(KERN_WARNING - "registering PCI controller with io_map_base unset\n"); - } - - /* - * Scan the bus if it is register after the PCI subsystem - * initialization. - */ - if (pci_initialized) { - mutex_lock(&pci_scan_mutex); - pcibios_scanbus(hose); - mutex_unlock(&pci_scan_mutex); - } - - return; - -out: - printk(KERN_WARNING - "Skipping PCI bus scan due to resource conflict\n"); -} - -static int __init pcibios_init(void) -{ - struct pci_channel *hose; - - /* Scan all of the recorded PCI controllers. */ - for (hose = hose_head; hose; hose = hose->next) - pcibios_scanbus(hose); - - pci_fixup_irqs(pci_common_swizzle, pcibios_map_platform_irq); - - dma_debug_add_bus(&pci_bus_type); - - pci_initialized = 1; - - return 0; -} -subsys_initcall(pcibios_init); - -static void pcibios_fixup_device_resources(struct pci_dev *dev, - struct pci_bus *bus) -{ - /* Update device resources. */ - struct pci_channel *hose = bus->sysdata; - unsigned long offset = 0; - int i; - - for (i = 0; i < PCI_NUM_RESOURCES; i++) { - if (!dev->resource[i].start) - continue; - if (dev->resource[i].flags & IORESOURCE_PCI_FIXED) - continue; - if (dev->resource[i].flags & IORESOURCE_IO) - offset = hose->io_offset; - else if (dev->resource[i].flags & IORESOURCE_MEM) - offset = hose->mem_offset; - - dev->resource[i].start += offset; - dev->resource[i].end += offset; - } -} - -/* - * Called after each bus is probed, but before its children - * are examined. - */ -void __devinit pcibios_fixup_bus(struct pci_bus *bus) -{ - struct pci_dev *dev = bus->self; - struct list_head *ln; - struct pci_channel *chan = bus->sysdata; - - if (!dev) { - bus->resource[0] = chan->io_resource; - bus->resource[1] = chan->mem_resource; - } - - for (ln = bus->devices.next; ln != &bus->devices; ln = ln->next) { - dev = pci_dev_b(ln); - - if ((dev->class >> 8) != PCI_CLASS_BRIDGE_PCI) - pcibios_fixup_device_resources(dev, bus); - } -} - -/* - * We need to avoid collisions with `mirrored' VGA ports - * and other strange ISA hardware, so we always want the - * addresses to be allocated in the 0x000-0x0ff region - * modulo 0x400. - */ -void pcibios_align_resource(void *data, struct resource *res, - resource_size_t size, resource_size_t align) -{ - struct pci_dev *dev = data; - struct pci_channel *chan = dev->sysdata; - resource_size_t start = res->start; - - if (res->flags & IORESOURCE_IO) { - if (start < PCIBIOS_MIN_IO + chan->io_resource->start) - start = PCIBIOS_MIN_IO + chan->io_resource->start; - - /* - * Put everything into 0x00-0xff region modulo 0x400. - */ - if (start & 0x300) { - start = (start + 0x3ff) & ~0x3ff; - res->start = start; - } - } else if (res->flags & IORESOURCE_MEM) { - if (start < PCIBIOS_MIN_MEM + chan->mem_resource->start) - start = PCIBIOS_MIN_MEM + chan->mem_resource->start; - } - - res->start = start; -} - -void pcibios_resource_to_bus(struct pci_dev *dev, struct pci_bus_region *region, - struct resource *res) -{ - struct pci_channel *hose = dev->sysdata; - unsigned long offset = 0; - - if (res->flags & IORESOURCE_IO) - offset = hose->io_offset; - else if (res->flags & IORESOURCE_MEM) - offset = hose->mem_offset; - - region->start = res->start - offset; - region->end = res->end - offset; -} - -void __devinit -pcibios_bus_to_resource(struct pci_dev *dev, struct resource *res, - struct pci_bus_region *region) -{ - struct pci_channel *hose = dev->sysdata; - unsigned long offset = 0; - - if (res->flags & IORESOURCE_IO) - offset = hose->io_offset; - else if (res->flags & IORESOURCE_MEM) - offset = hose->mem_offset; - - res->start = region->start + offset; - res->end = region->end + offset; -} - -int pcibios_enable_device(struct pci_dev *dev, int mask) -{ - u16 cmd, old_cmd; - int idx; - struct resource *r; - - pci_read_config_word(dev, PCI_COMMAND, &cmd); - old_cmd = cmd; - for (idx=0; idx < PCI_NUM_RESOURCES; idx++) { - /* Only set up the requested stuff */ - if (!(mask & (1<resource[idx]; - if (!(r->flags & (IORESOURCE_IO | IORESOURCE_MEM))) - continue; - if ((idx == PCI_ROM_RESOURCE) && - (!(r->flags & IORESOURCE_ROM_ENABLE))) - continue; - if (!r->start && r->end) { - printk(KERN_ERR "PCI: Device %s not available " - "because of resource collisions\n", - pci_name(dev)); - return -EINVAL; - } - if (r->flags & IORESOURCE_IO) - cmd |= PCI_COMMAND_IO; - if (r->flags & IORESOURCE_MEM) - cmd |= PCI_COMMAND_MEMORY; - } - if (cmd != old_cmd) { - printk("PCI: Enabling device %s (%04x -> %04x)\n", - pci_name(dev), old_cmd, cmd); - pci_write_config_word(dev, PCI_COMMAND, cmd); - } - return 0; -} - -/* - * If we set up a device for bus mastering, we need to check and set - * the latency timer as it may not be properly set. - */ -static unsigned int pcibios_max_latency = 255; - -void pcibios_set_master(struct pci_dev *dev) -{ - u8 lat; - pci_read_config_byte(dev, PCI_LATENCY_TIMER, &lat); - if (lat < 16) - lat = (64 <= pcibios_max_latency) ? 64 : pcibios_max_latency; - else if (lat > pcibios_max_latency) - lat = pcibios_max_latency; - else - return; - printk(KERN_INFO "PCI: Setting latency timer of device %s to %d\n", - pci_name(dev), lat); - pci_write_config_byte(dev, PCI_LATENCY_TIMER, lat); -} - -void __init pcibios_update_irq(struct pci_dev *dev, int irq) -{ - pci_write_config_byte(dev, PCI_INTERRUPT_LINE, irq); -} - -char * __devinit pcibios_setup(char *str) -{ - return str; -} - -int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma, - enum pci_mmap_state mmap_state, int write_combine) -{ - /* - * I/O space can be accessed via normal processor loads and stores on - * this platform but for now we elect not to do this and portable - * drivers should not do this anyway. - */ - if (mmap_state == pci_mmap_io) - return -EINVAL; - - /* - * Ignore write-combine; for now only return uncached mappings. - */ - vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot); - - return remap_pfn_range(vma, vma->vm_start, vma->vm_pgoff, - vma->vm_end - vma->vm_start, - vma->vm_page_prot); -} - -static void __iomem *ioport_map_pci(struct pci_dev *dev, - unsigned long port, unsigned int nr) -{ - struct pci_channel *chan = dev->sysdata; - - if (!chan->io_map_base) - chan->io_map_base = generic_io_base; - - return (void __iomem *)(chan->io_map_base + port); -} - -void __iomem *pci_iomap(struct pci_dev *dev, int bar, unsigned long maxlen) -{ - resource_size_t start = pci_resource_start(dev, bar); - resource_size_t len = pci_resource_len(dev, bar); - unsigned long flags = pci_resource_flags(dev, bar); - - if (unlikely(!len || !start)) - return NULL; - if (maxlen && len > maxlen) - len = maxlen; - - if (flags & IORESOURCE_IO) - return ioport_map_pci(dev, start, len); - - /* - * Presently the IORESOURCE_MEM case is a bit special, most - * SH7751 style PCI controllers have PCI memory at a fixed - * location in the address space where no remapping is desired. - * With the IORESOURCE_MEM case more care has to be taken - * to inhibit page table mapping for legacy cores, but this is - * punted off to __ioremap(). - * -- PFM. - */ - if (flags & IORESOURCE_MEM) { - if (flags & IORESOURCE_CACHEABLE) - return ioremap(start, len); - - return ioremap_nocache(start, len); - } - - return NULL; -} -EXPORT_SYMBOL(pci_iomap); - -void pci_iounmap(struct pci_dev *dev, void __iomem *addr) -{ - iounmap(addr); -} -EXPORT_SYMBOL(pci_iounmap); - -#ifdef CONFIG_HOTPLUG -EXPORT_SYMBOL(pcibios_resource_to_bus); -EXPORT_SYMBOL(pcibios_bus_to_resource); -EXPORT_SYMBOL(PCIBIOS_MIN_IO); -EXPORT_SYMBOL(PCIBIOS_MIN_MEM); -#endif diff --git a/arch/sh/drivers/pci/pci.c b/arch/sh/drivers/pci/pci.c new file mode 100644 index 0000000..54d77cb --- /dev/null +++ b/arch/sh/drivers/pci/pci.c @@ -0,0 +1,364 @@ +/* + * New-style PCI core. + * + * Copyright (c) 2004 - 2009 Paul Mundt + * Copyright (c) 2002 M. R. Brown + * + * Modelled after arch/mips/pci/pci.c: + * Copyright (C) 2003, 04 Ralf Baechle (ralf@linux-mips.org) + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include +#include +#include +#include +#include +#include +#include +#include + +unsigned long PCIBIOS_MIN_IO = 0x0000; +unsigned long PCIBIOS_MIN_MEM = 0; + +/* + * The PCI controller list. + */ +static struct pci_channel *hose_head, **hose_tail = &hose_head; + +static int pci_initialized; + +static void __devinit pcibios_scanbus(struct pci_channel *hose) +{ + static int next_busno; + struct pci_bus *bus; + + bus = pci_scan_bus(next_busno, hose->pci_ops, hose); + if (bus) { + next_busno = bus->subordinate + 1; + /* Don't allow 8-bit bus number overflow inside the hose - + reserve some space for bridges. */ + if (next_busno > 224) + next_busno = 0; + + pci_bus_size_bridges(bus); + pci_bus_assign_resources(bus); + pci_enable_bridges(bus); + } +} + +static DEFINE_MUTEX(pci_scan_mutex); + +void __devinit register_pci_controller(struct pci_channel *hose) +{ + if (request_resource(&iomem_resource, hose->mem_resource) < 0) + goto out; + if (request_resource(&ioport_resource, hose->io_resource) < 0) { + release_resource(hose->mem_resource); + goto out; + } + + *hose_tail = hose; + hose_tail = &hose->next; + + /* + * Do not panic here but later - this might hapen before console init. + */ + if (!hose->io_map_base) { + printk(KERN_WARNING + "registering PCI controller with io_map_base unset\n"); + } + + /* + * Scan the bus if it is register after the PCI subsystem + * initialization. + */ + if (pci_initialized) { + mutex_lock(&pci_scan_mutex); + pcibios_scanbus(hose); + mutex_unlock(&pci_scan_mutex); + } + + return; + +out: + printk(KERN_WARNING + "Skipping PCI bus scan due to resource conflict\n"); +} + +static int __init pcibios_init(void) +{ + struct pci_channel *hose; + + /* Scan all of the recorded PCI controllers. */ + for (hose = hose_head; hose; hose = hose->next) + pcibios_scanbus(hose); + + pci_fixup_irqs(pci_common_swizzle, pcibios_map_platform_irq); + + dma_debug_add_bus(&pci_bus_type); + + pci_initialized = 1; + + return 0; +} +subsys_initcall(pcibios_init); + +static void pcibios_fixup_device_resources(struct pci_dev *dev, + struct pci_bus *bus) +{ + /* Update device resources. */ + struct pci_channel *hose = bus->sysdata; + unsigned long offset = 0; + int i; + + for (i = 0; i < PCI_NUM_RESOURCES; i++) { + if (!dev->resource[i].start) + continue; + if (dev->resource[i].flags & IORESOURCE_PCI_FIXED) + continue; + if (dev->resource[i].flags & IORESOURCE_IO) + offset = hose->io_offset; + else if (dev->resource[i].flags & IORESOURCE_MEM) + offset = hose->mem_offset; + + dev->resource[i].start += offset; + dev->resource[i].end += offset; + } +} + +/* + * Called after each bus is probed, but before its children + * are examined. + */ +void __devinit pcibios_fixup_bus(struct pci_bus *bus) +{ + struct pci_dev *dev = bus->self; + struct list_head *ln; + struct pci_channel *chan = bus->sysdata; + + if (!dev) { + bus->resource[0] = chan->io_resource; + bus->resource[1] = chan->mem_resource; + } + + for (ln = bus->devices.next; ln != &bus->devices; ln = ln->next) { + dev = pci_dev_b(ln); + + if ((dev->class >> 8) != PCI_CLASS_BRIDGE_PCI) + pcibios_fixup_device_resources(dev, bus); + } +} + +/* + * We need to avoid collisions with `mirrored' VGA ports + * and other strange ISA hardware, so we always want the + * addresses to be allocated in the 0x000-0x0ff region + * modulo 0x400. + */ +void pcibios_align_resource(void *data, struct resource *res, + resource_size_t size, resource_size_t align) +{ + struct pci_dev *dev = data; + struct pci_channel *chan = dev->sysdata; + resource_size_t start = res->start; + + if (res->flags & IORESOURCE_IO) { + if (start < PCIBIOS_MIN_IO + chan->io_resource->start) + start = PCIBIOS_MIN_IO + chan->io_resource->start; + + /* + * Put everything into 0x00-0xff region modulo 0x400. + */ + if (start & 0x300) { + start = (start + 0x3ff) & ~0x3ff; + res->start = start; + } + } else if (res->flags & IORESOURCE_MEM) { + if (start < PCIBIOS_MIN_MEM + chan->mem_resource->start) + start = PCIBIOS_MIN_MEM + chan->mem_resource->start; + } + + res->start = start; +} + +void pcibios_resource_to_bus(struct pci_dev *dev, struct pci_bus_region *region, + struct resource *res) +{ + struct pci_channel *hose = dev->sysdata; + unsigned long offset = 0; + + if (res->flags & IORESOURCE_IO) + offset = hose->io_offset; + else if (res->flags & IORESOURCE_MEM) + offset = hose->mem_offset; + + region->start = res->start - offset; + region->end = res->end - offset; +} + +void __devinit +pcibios_bus_to_resource(struct pci_dev *dev, struct resource *res, + struct pci_bus_region *region) +{ + struct pci_channel *hose = dev->sysdata; + unsigned long offset = 0; + + if (res->flags & IORESOURCE_IO) + offset = hose->io_offset; + else if (res->flags & IORESOURCE_MEM) + offset = hose->mem_offset; + + res->start = region->start + offset; + res->end = region->end + offset; +} + +int pcibios_enable_device(struct pci_dev *dev, int mask) +{ + u16 cmd, old_cmd; + int idx; + struct resource *r; + + pci_read_config_word(dev, PCI_COMMAND, &cmd); + old_cmd = cmd; + for (idx=0; idx < PCI_NUM_RESOURCES; idx++) { + /* Only set up the requested stuff */ + if (!(mask & (1<resource[idx]; + if (!(r->flags & (IORESOURCE_IO | IORESOURCE_MEM))) + continue; + if ((idx == PCI_ROM_RESOURCE) && + (!(r->flags & IORESOURCE_ROM_ENABLE))) + continue; + if (!r->start && r->end) { + printk(KERN_ERR "PCI: Device %s not available " + "because of resource collisions\n", + pci_name(dev)); + return -EINVAL; + } + if (r->flags & IORESOURCE_IO) + cmd |= PCI_COMMAND_IO; + if (r->flags & IORESOURCE_MEM) + cmd |= PCI_COMMAND_MEMORY; + } + if (cmd != old_cmd) { + printk("PCI: Enabling device %s (%04x -> %04x)\n", + pci_name(dev), old_cmd, cmd); + pci_write_config_word(dev, PCI_COMMAND, cmd); + } + return 0; +} + +/* + * If we set up a device for bus mastering, we need to check and set + * the latency timer as it may not be properly set. + */ +static unsigned int pcibios_max_latency = 255; + +void pcibios_set_master(struct pci_dev *dev) +{ + u8 lat; + pci_read_config_byte(dev, PCI_LATENCY_TIMER, &lat); + if (lat < 16) + lat = (64 <= pcibios_max_latency) ? 64 : pcibios_max_latency; + else if (lat > pcibios_max_latency) + lat = pcibios_max_latency; + else + return; + printk(KERN_INFO "PCI: Setting latency timer of device %s to %d\n", + pci_name(dev), lat); + pci_write_config_byte(dev, PCI_LATENCY_TIMER, lat); +} + +void __init pcibios_update_irq(struct pci_dev *dev, int irq) +{ + pci_write_config_byte(dev, PCI_INTERRUPT_LINE, irq); +} + +char * __devinit pcibios_setup(char *str) +{ + return str; +} + +int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma, + enum pci_mmap_state mmap_state, int write_combine) +{ + /* + * I/O space can be accessed via normal processor loads and stores on + * this platform but for now we elect not to do this and portable + * drivers should not do this anyway. + */ + if (mmap_state == pci_mmap_io) + return -EINVAL; + + /* + * Ignore write-combine; for now only return uncached mappings. + */ + vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot); + + return remap_pfn_range(vma, vma->vm_start, vma->vm_pgoff, + vma->vm_end - vma->vm_start, + vma->vm_page_prot); +} + +static void __iomem *ioport_map_pci(struct pci_dev *dev, + unsigned long port, unsigned int nr) +{ + struct pci_channel *chan = dev->sysdata; + + if (!chan->io_map_base) + chan->io_map_base = generic_io_base; + + return (void __iomem *)(chan->io_map_base + port); +} + +void __iomem *pci_iomap(struct pci_dev *dev, int bar, unsigned long maxlen) +{ + resource_size_t start = pci_resource_start(dev, bar); + resource_size_t len = pci_resource_len(dev, bar); + unsigned long flags = pci_resource_flags(dev, bar); + + if (unlikely(!len || !start)) + return NULL; + if (maxlen && len > maxlen) + len = maxlen; + + if (flags & IORESOURCE_IO) + return ioport_map_pci(dev, start, len); + + /* + * Presently the IORESOURCE_MEM case is a bit special, most + * SH7751 style PCI controllers have PCI memory at a fixed + * location in the address space where no remapping is desired. + * With the IORESOURCE_MEM case more care has to be taken + * to inhibit page table mapping for legacy cores, but this is + * punted off to __ioremap(). + * -- PFM. + */ + if (flags & IORESOURCE_MEM) { + if (flags & IORESOURCE_CACHEABLE) + return ioremap(start, len); + + return ioremap_nocache(start, len); + } + + return NULL; +} +EXPORT_SYMBOL(pci_iomap); + +void pci_iounmap(struct pci_dev *dev, void __iomem *addr) +{ + iounmap(addr); +} +EXPORT_SYMBOL(pci_iounmap); + +#ifdef CONFIG_HOTPLUG +EXPORT_SYMBOL(pcibios_resource_to_bus); +EXPORT_SYMBOL(pcibios_bus_to_resource); +EXPORT_SYMBOL(PCIBIOS_MIN_IO); +EXPORT_SYMBOL(PCIBIOS_MIN_MEM); +#endif -- cgit v0.10.2 From 19bdc9d061bcb71efd2b53083d96b59bbe1a1751 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Fri, 17 Apr 2009 05:26:31 +0000 Subject: clocksource: sh_cmt clocksource support Add clocksource support to the sh_cmt driver. With this in place we can do tickless with a single CMT channel. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt diff --git a/drivers/clocksource/sh_cmt.c b/drivers/clocksource/sh_cmt.c index 02bae39..c247564 100644 --- a/drivers/clocksource/sh_cmt.c +++ b/drivers/clocksource/sh_cmt.c @@ -47,6 +47,7 @@ struct sh_cmt_priv { unsigned long rate; spinlock_t lock; struct clock_event_device ced; + struct clocksource cs; unsigned long total_cycles; }; @@ -376,6 +377,68 @@ static void sh_cmt_stop(struct sh_cmt_priv *p, unsigned long flag) spin_unlock_irqrestore(&p->lock, flags); } +static struct sh_cmt_priv *cs_to_sh_cmt(struct clocksource *cs) +{ + return container_of(cs, struct sh_cmt_priv, cs); +} + +static cycle_t sh_cmt_clocksource_read(struct clocksource *cs) +{ + struct sh_cmt_priv *p = cs_to_sh_cmt(cs); + unsigned long flags, raw; + unsigned long value; + int has_wrapped; + + spin_lock_irqsave(&p->lock, flags); + value = p->total_cycles; + raw = sh_cmt_get_counter(p, &has_wrapped); + + if (unlikely(has_wrapped)) + raw = p->match_value; + spin_unlock_irqrestore(&p->lock, flags); + + return value + raw; +} + +static int sh_cmt_clocksource_enable(struct clocksource *cs) +{ + struct sh_cmt_priv *p = cs_to_sh_cmt(cs); + int ret; + + p->total_cycles = 0; + + ret = sh_cmt_start(p, FLAG_CLOCKSOURCE); + if (ret) + return ret; + + /* TODO: calculate good shift from rate and counter bit width */ + cs->shift = 0; + cs->mult = clocksource_hz2mult(p->rate, cs->shift); + return 0; +} + +static void sh_cmt_clocksource_disable(struct clocksource *cs) +{ + sh_cmt_stop(cs_to_sh_cmt(cs), FLAG_CLOCKSOURCE); +} + +static int sh_cmt_register_clocksource(struct sh_cmt_priv *p, + char *name, unsigned long rating) +{ + struct clocksource *cs = &p->cs; + + cs->name = name; + cs->rating = rating; + cs->read = sh_cmt_clocksource_read; + cs->enable = sh_cmt_clocksource_enable; + cs->disable = sh_cmt_clocksource_disable; + cs->mask = CLOCKSOURCE_MASK(sizeof(unsigned long) * 8); + cs->flags = CLOCK_SOURCE_IS_CONTINUOUS; + pr_info("sh_cmt: %s used as clock source\n", cs->name); + clocksource_register(cs); + return 0; +} + static struct sh_cmt_priv *ced_to_sh_cmt(struct clock_event_device *ced) { return container_of(ced, struct sh_cmt_priv, ced); @@ -483,6 +546,9 @@ int sh_cmt_register(struct sh_cmt_priv *p, char *name, if (clockevent_rating) sh_cmt_register_clockevent(p, name, clockevent_rating); + if (clocksource_rating) + sh_cmt_register_clocksource(p, name, clocksource_rating); + return 0; } -- cgit v0.10.2 From 3e98f9f15e916c48dfc5231d7e6a59be7f122764 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Fri, 24 Apr 2009 15:39:39 +0900 Subject: sh: pci: Fix up the build for CONFIG_PCI=n. Signed-off-by: Paul Mundt diff --git a/arch/sh/include/asm/pci.h b/arch/sh/include/asm/pci.h index f9101215..5b2e0fc 100644 --- a/arch/sh/include/asm/pci.h +++ b/arch/sh/include/asm/pci.h @@ -88,6 +88,7 @@ static inline void pcibios_penalize_isa_irq(int irq, int active) #define pci_unmap_len_set(PTR, LEN_NAME, VAL) do { } while (0) #endif +#ifdef CONFIG_PCI static inline void pci_dma_burst_advice(struct pci_dev *pdev, enum pci_dma_burst_strategy *strat, unsigned long *strategy_parameter) @@ -95,6 +96,7 @@ static inline void pci_dma_burst_advice(struct pci_dev *pdev, *strat = PCI_DMA_BURST_INFINITY; *strategy_parameter = ~0UL; } +#endif #ifdef CONFIG_SUPERH32 /* -- cgit v0.10.2 From fc4967b8c6a1540ebce9ac48e44b8d44e7fac971 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Mon, 27 Apr 2009 14:06:26 +0900 Subject: sh: update defconfigs for PCI changes. Signed-off-by: Paul Mundt diff --git a/arch/sh/configs/ap325rxa_defconfig b/arch/sh/configs/ap325rxa_defconfig index c8d982a..022f70e 100644 --- a/arch/sh/configs/ap325rxa_defconfig +++ b/arch/sh/configs/ap325rxa_defconfig @@ -1,10 +1,11 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29 -# Thu Apr 2 17:46:53 2009 +# Linux kernel version: 2.6.30-rc3 +# Mon Apr 27 12:42:06 2009 # CONFIG_SUPERH=y CONFIG_SUPERH32=y +# CONFIG_SUPERH64 is not set CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig" CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_GENERIC_BUG=y @@ -74,6 +75,7 @@ CONFIG_EMBEDDED=y CONFIG_UID16=y CONFIG_SYSCTL_SYSCALL=y # CONFIG_KALLSYMS is not set +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y @@ -92,12 +94,15 @@ CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set # CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_HAVE_CLK=y +CONFIG_HAVE_DMA_API_DEBUG=y +# CONFIG_SLOW_WORK is not set CONFIG_HAVE_GENERIC_DMA_COHERENT=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -110,7 +115,6 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -159,6 +163,7 @@ CONFIG_ARCH_SHMOBILE=y # CONFIG_CPU_SUBTYPE_SH7760 is not set # CONFIG_CPU_SUBTYPE_SH4_202 is not set CONFIG_CPU_SUBTYPE_SH7723=y +# CONFIG_CPU_SUBTYPE_SH7724 is not set # CONFIG_CPU_SUBTYPE_SH7763 is not set # CONFIG_CPU_SUBTYPE_SH7770 is not set # CONFIG_CPU_SUBTYPE_SH7780 is not set @@ -168,8 +173,6 @@ CONFIG_CPU_SUBTYPE_SH7723=y # CONFIG_CPU_SUBTYPE_SH7343 is not set # CONFIG_CPU_SUBTYPE_SH7722 is not set # CONFIG_CPU_SUBTYPE_SH7366 is not set -# CONFIG_CPU_SUBTYPE_SH5_101 is not set -# CONFIG_CPU_SUBTYPE_SH5_103 is not set # # Memory management options @@ -573,6 +576,7 @@ CONFIG_SCSI_WAIT_SCAN=m CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set # CONFIG_LIBFC is not set +# CONFIG_LIBFCOE is not set # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_DH is not set # CONFIG_SCSI_OSD_INITIATOR is not set @@ -695,6 +699,7 @@ CONFIG_DEVKMEM=y # # Non-8250 serial port support # +# CONFIG_SERIAL_MAX3100 is not set CONFIG_SERIAL_SH_SCI=y CONFIG_SERIAL_SH_SCI_NR_UARTS=6 CONFIG_SERIAL_SH_SCI_CONSOLE=y @@ -1030,6 +1035,7 @@ CONFIG_EXT2_FS_POSIX_ACL=y CONFIG_EXT2_FS_SECURITY=y # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set CONFIG_EXT3_FS_XATTR=y CONFIG_EXT3_FS_POSIX_ACL=y CONFIG_EXT3_FS_SECURITY=y @@ -1052,6 +1058,11 @@ CONFIG_INOTIFY_USER=y # CONFIG_FUSE_FS is not set # +# Caches +# +# CONFIG_FSCACHE is not set + +# # CD-ROM/DVD Filesystems # # CONFIG_ISO9660_FS is not set @@ -1100,6 +1111,7 @@ CONFIG_MISC_FILESYSTEMS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -1191,10 +1203,24 @@ CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_TRACING_SUPPORT=y # # Tracers # +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set +# CONFIG_PREEMPT_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_SH_STANDARD_BIOS is not set @@ -1303,6 +1329,7 @@ CONFIG_CRYPTO_CBC=y # # CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y +# CONFIG_BINARY_PRINTF is not set # # Library routines diff --git a/arch/sh/configs/cayman_defconfig b/arch/sh/configs/cayman_defconfig index fa5fc1e..40301f8 100644 --- a/arch/sh/configs/cayman_defconfig +++ b/arch/sh/configs/cayman_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29 -# Thu Apr 2 17:49:14 2009 +# Linux kernel version: 2.6.30-rc3 +# Mon Apr 27 13:42:53 2009 # CONFIG_SUPERH=y # CONFIG_SUPERH32 is not set @@ -40,6 +40,7 @@ CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y # CONFIG_SYSVIPC is not set CONFIG_POSIX_MQUEUE=y +CONFIG_POSIX_MQUEUE_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set @@ -70,6 +71,7 @@ CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y @@ -89,10 +91,13 @@ CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set # CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_HAVE_CLK=y +CONFIG_HAVE_DMA_API_DEBUG=y +# CONFIG_SLOW_WORK is not set CONFIG_HAVE_GENERIC_DMA_COHERENT=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -105,7 +110,6 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -127,39 +131,6 @@ CONFIG_DEFAULT_IOSCHED="cfq" # System type # CONFIG_CPU_SH5=y -# CONFIG_CPU_SUBTYPE_SH7619 is not set -# CONFIG_CPU_SUBTYPE_SH7201 is not set -# CONFIG_CPU_SUBTYPE_SH7203 is not set -# CONFIG_CPU_SUBTYPE_SH7206 is not set -# CONFIG_CPU_SUBTYPE_SH7263 is not set -# CONFIG_CPU_SUBTYPE_MXG is not set -# CONFIG_CPU_SUBTYPE_SH7705 is not set -# CONFIG_CPU_SUBTYPE_SH7706 is not set -# CONFIG_CPU_SUBTYPE_SH7707 is not set -# CONFIG_CPU_SUBTYPE_SH7708 is not set -# CONFIG_CPU_SUBTYPE_SH7709 is not set -# CONFIG_CPU_SUBTYPE_SH7710 is not set -# CONFIG_CPU_SUBTYPE_SH7712 is not set -# CONFIG_CPU_SUBTYPE_SH7720 is not set -# CONFIG_CPU_SUBTYPE_SH7721 is not set -# CONFIG_CPU_SUBTYPE_SH7750 is not set -# CONFIG_CPU_SUBTYPE_SH7091 is not set -# CONFIG_CPU_SUBTYPE_SH7750R is not set -# CONFIG_CPU_SUBTYPE_SH7750S is not set -# CONFIG_CPU_SUBTYPE_SH7751 is not set -# CONFIG_CPU_SUBTYPE_SH7751R is not set -# CONFIG_CPU_SUBTYPE_SH7760 is not set -# CONFIG_CPU_SUBTYPE_SH4_202 is not set -# CONFIG_CPU_SUBTYPE_SH7723 is not set -# CONFIG_CPU_SUBTYPE_SH7763 is not set -# CONFIG_CPU_SUBTYPE_SH7770 is not set -# CONFIG_CPU_SUBTYPE_SH7780 is not set -# CONFIG_CPU_SUBTYPE_SH7785 is not set -# CONFIG_CPU_SUBTYPE_SH7786 is not set -# CONFIG_CPU_SUBTYPE_SHX3 is not set -# CONFIG_CPU_SUBTYPE_SH7343 is not set -# CONFIG_CPU_SUBTYPE_SH7722 is not set -# CONFIG_CPU_SUBTYPE_SH7366 is not set CONFIG_CPU_SUBTYPE_SH5_101=y # CONFIG_CPU_SUBTYPE_SH5_103 is not set @@ -279,8 +250,6 @@ CONFIG_BOOT_LINK_OFFSET=0x00800000 # CONFIG_PCI=y CONFIG_SH_PCIDMA_NONCOHERENT=y -CONFIG_PCI_AUTO=y -CONFIG_PCI_AUTO_UPDATE_RESOURCES=y # CONFIG_PCIEPORTBUS is not set # CONFIG_ARCH_SUPPORTS_MSI is not set CONFIG_PCI_LEGACY=y @@ -492,6 +461,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_MPT2SAS is not set # CONFIG_SCSI_HPTIOP is not set # CONFIG_LIBFC is not set +# CONFIG_LIBFCOE is not set # CONFIG_FCOE is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set @@ -568,6 +538,7 @@ CONFIG_NETDEV_1000=y # CONFIG_E1000E is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set +# CONFIG_IGBVF is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -591,6 +562,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set +# CONFIG_VXGE is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set # CONFIG_NIU is not set @@ -779,6 +751,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_F71805F is not set # CONFIG_SENSORS_F71882FG is not set # CONFIG_SENSORS_F75375S is not set +# CONFIG_SENSORS_G760A is not set # CONFIG_SENSORS_GL518SM is not set # CONFIG_SENSORS_GL520SM is not set # CONFIG_SENSORS_IT87 is not set @@ -1042,7 +1015,6 @@ CONFIG_HID=y # # Special HID drivers # -CONFIG_HID_COMPAT=y CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y @@ -1082,6 +1054,7 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set @@ -1105,6 +1078,11 @@ CONFIG_INOTIFY_USER=y # CONFIG_FUSE_FS is not set # +# Caches +# +# CONFIG_FSCACHE is not set + +# # CD-ROM/DVD Filesystems # # CONFIG_ISO9660_FS is not set @@ -1146,8 +1124,13 @@ CONFIG_MINIX_FS=y # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set CONFIG_ROMFS_FS=y +CONFIG_ROMFS_BACKED_BY_BLOCK=y +# CONFIG_ROMFS_BACKED_BY_MTD is not set +# CONFIG_ROMFS_BACKED_BY_BOTH is not set +CONFIG_ROMFS_ON_BLOCK=y # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -1208,6 +1191,9 @@ CONFIG_DEBUG_KERNEL=y CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y CONFIG_SCHEDSTATS=y # CONFIG_TIMER_STATS is not set @@ -1241,15 +1227,21 @@ CONFIG_FRAME_POINTER=y # CONFIG_LATENCYTOP is not set # CONFIG_SYSCTL_SYSCALL_CHECK is not set # CONFIG_PAGE_POISONING is not set +CONFIG_TRACING_SUPPORT=y # # Tracers # # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set # CONFIG_BOOT_TRACER is not set # CONFIG_TRACE_BRANCH_PROFILING is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_DYNAMIC_DEBUG is not set +# CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set # CONFIG_EARLY_SCIF_CONSOLE is not set # CONFIG_DEBUG_BOOTMEM is not set @@ -1354,6 +1346,7 @@ CONFIG_CRYPTO=y # CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines diff --git a/arch/sh/configs/dreamcast_defconfig b/arch/sh/configs/dreamcast_defconfig index 5c11236..1f3cc98 100644 --- a/arch/sh/configs/dreamcast_defconfig +++ b/arch/sh/configs/dreamcast_defconfig @@ -1,10 +1,11 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29 -# Thu Apr 2 17:51:48 2009 +# Linux kernel version: 2.6.30-rc3 +# Mon Apr 27 12:44:27 2009 # CONFIG_SUPERH=y CONFIG_SUPERH32=y +# CONFIG_SUPERH64 is not set CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig" CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_GENERIC_BUG=y @@ -71,6 +72,7 @@ CONFIG_UID16=y # CONFIG_SYSCTL_SYSCALL is not set CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y @@ -90,6 +92,7 @@ CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set CONFIG_PROFILING=y +# CONFIG_MARKERS is not set # CONFIG_OPROFILE is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set @@ -98,6 +101,8 @@ CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_HAVE_CLK=y +CONFIG_HAVE_DMA_API_DEBUG=y +# CONFIG_SLOW_WORK is not set CONFIG_HAVE_GENERIC_DMA_COHERENT=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -110,7 +115,6 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -156,6 +160,7 @@ CONFIG_CPU_SUBTYPE_SH7091=y # CONFIG_CPU_SUBTYPE_SH7760 is not set # CONFIG_CPU_SUBTYPE_SH4_202 is not set # CONFIG_CPU_SUBTYPE_SH7723 is not set +# CONFIG_CPU_SUBTYPE_SH7724 is not set # CONFIG_CPU_SUBTYPE_SH7763 is not set # CONFIG_CPU_SUBTYPE_SH7770 is not set # CONFIG_CPU_SUBTYPE_SH7780 is not set @@ -165,8 +170,6 @@ CONFIG_CPU_SUBTYPE_SH7091=y # CONFIG_CPU_SUBTYPE_SH7343 is not set # CONFIG_CPU_SUBTYPE_SH7722 is not set # CONFIG_CPU_SUBTYPE_SH7366 is not set -# CONFIG_CPU_SUBTYPE_SH5_101 is not set -# CONFIG_CPU_SUBTYPE_SH5_103 is not set # # Memory management options @@ -271,7 +274,7 @@ CONFIG_CPU_FREQ_GOV_USERSPACE=y CONFIG_SH_DMA_API=y CONFIG_SH_DMA=y CONFIG_SH_DMA_IRQ_MULTI=y -CONFIG_NR_ONCHIP_DMA_CHANNELS=6 +CONFIG_NR_ONCHIP_DMA_CHANNELS=4 CONFIG_NR_DMA_CHANNELS_BOOL=y CONFIG_NR_DMA_CHANNELS=9 # CONFIG_PVR2_DMA is not set @@ -320,7 +323,6 @@ CONFIG_CMDLINE="console=ttySC1,115200 panic=3" CONFIG_MAPLE=y CONFIG_PCI=y CONFIG_SH_PCIDMA_NONCOHERENT=y -CONFIG_PCI_AUTO=y # CONFIG_PCIEPORTBUS is not set # CONFIG_ARCH_SUPPORTS_MSI is not set CONFIG_PCI_LEGACY=y @@ -602,6 +604,7 @@ CONFIG_INPUT_MOUSE=y # CONFIG_MOUSE_APPLETOUCH is not set # CONFIG_MOUSE_BCM5974 is not set # CONFIG_MOUSE_VSXXXAA is not set +# CONFIG_MOUSE_MAPLE is not set # CONFIG_INPUT_JOYSTICK is not set # CONFIG_INPUT_TABLET is not set # CONFIG_INPUT_TOUCHSCREEN is not set @@ -812,7 +815,6 @@ CONFIG_HID=y # # Special HID drivers # -CONFIG_HID_COMPAT=y CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y @@ -867,6 +869,11 @@ CONFIG_INOTIFY_USER=y # CONFIG_FUSE_FS is not set # +# Caches +# +# CONFIG_FSCACHE is not set + +# # CD-ROM/DVD Filesystems # # CONFIG_ISO9660_FS is not set @@ -910,6 +917,7 @@ CONFIG_MISC_FILESYSTEMS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y # CONFIG_NFS_FS is not set # CONFIG_NFSD is not set @@ -947,10 +955,24 @@ CONFIG_FRAME_WARN=1024 CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_TRACING_SUPPORT=y # # Tracers # +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set +# CONFIG_PREEMPT_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_SH_STANDARD_BIOS is not set @@ -1051,6 +1073,7 @@ CONFIG_CRYPTO=y # CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines diff --git a/arch/sh/configs/edosk7705_defconfig b/arch/sh/configs/edosk7705_defconfig index f4c34b0..d709245 100644 --- a/arch/sh/configs/edosk7705_defconfig +++ b/arch/sh/configs/edosk7705_defconfig @@ -1,10 +1,11 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29 -# Thu Apr 2 17:54:02 2009 +# Linux kernel version: 2.6.30-rc3 +# Mon Apr 27 12:45:04 2009 # CONFIG_SUPERH=y CONFIG_SUPERH32=y +# CONFIG_SUPERH64 is not set CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig" CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_GENERIC_FIND_NEXT_BIT=y @@ -56,6 +57,7 @@ CONFIG_EMBEDDED=y # CONFIG_UID16 is not set # CONFIG_SYSCTL_SYSCALL is not set # CONFIG_KALLSYMS is not set +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_HOTPLUG is not set # CONFIG_PRINTK is not set # CONFIG_BUG is not set @@ -74,12 +76,15 @@ CONFIG_SHMEM=y CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_HAVE_CLK=y +CONFIG_HAVE_DMA_API_DEBUG=y +# CONFIG_SLOW_WORK is not set CONFIG_HAVE_GENERIC_DMA_COHERENT=y CONFIG_BASE_SMALL=1 # CONFIG_MODULES is not set @@ -114,6 +119,7 @@ CONFIG_CPU_SUBTYPE_SH7705=y # CONFIG_CPU_SUBTYPE_SH7760 is not set # CONFIG_CPU_SUBTYPE_SH4_202 is not set # CONFIG_CPU_SUBTYPE_SH7723 is not set +# CONFIG_CPU_SUBTYPE_SH7724 is not set # CONFIG_CPU_SUBTYPE_SH7763 is not set # CONFIG_CPU_SUBTYPE_SH7770 is not set # CONFIG_CPU_SUBTYPE_SH7780 is not set @@ -123,8 +129,6 @@ CONFIG_CPU_SUBTYPE_SH7705=y # CONFIG_CPU_SUBTYPE_SH7343 is not set # CONFIG_CPU_SUBTYPE_SH7722 is not set # CONFIG_CPU_SUBTYPE_SH7366 is not set -# CONFIG_CPU_SUBTYPE_SH5_101 is not set -# CONFIG_CPU_SUBTYPE_SH5_103 is not set # # Memory management options @@ -382,6 +386,10 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_FUSE_FS is not set # +# Caches +# + +# # Pseudo filesystems # # CONFIG_PROC_FS is not set @@ -409,10 +417,22 @@ CONFIG_FRAME_WARN=1024 CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_TRACING_SUPPORT=y # # Tracers # +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_SH_STANDARD_BIOS is not set @@ -426,6 +446,7 @@ CONFIG_HAVE_ARCH_KGDB=y # CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set # CONFIG_CRYPTO is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines diff --git a/arch/sh/configs/edosk7760_defconfig b/arch/sh/configs/edosk7760_defconfig index 7825c26..a822b1d 100644 --- a/arch/sh/configs/edosk7760_defconfig +++ b/arch/sh/configs/edosk7760_defconfig @@ -1,10 +1,11 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29 -# Thu Apr 2 17:54:57 2009 +# Linux kernel version: 2.6.30-rc3 +# Mon Apr 27 12:45:25 2009 # CONFIG_SUPERH=y CONFIG_SUPERH32=y +# CONFIG_SUPERH64 is not set CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig" CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_GENERIC_BUG=y @@ -40,6 +41,7 @@ CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y +CONFIG_POSIX_MQUEUE_SYSCTL=y CONFIG_BSD_PROCESS_ACCT=y # CONFIG_BSD_PROCESS_ACCT_V3 is not set # CONFIG_TASKSTATS is not set @@ -67,7 +69,6 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_RD_GZIP=y # CONFIG_RD_BZIP2 is not set # CONFIG_RD_LZMA is not set -CONFIG_INITRAMFS_COMPRESSION_NONE=y CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=y CONFIG_ANON_INODES=y @@ -77,6 +78,7 @@ CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y # CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y @@ -96,6 +98,7 @@ CONFIG_COMPAT_BRK=y CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_IOREMAP_PROT=y @@ -103,6 +106,8 @@ CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_HAVE_CLK=y +CONFIG_HAVE_DMA_API_DEBUG=y +# CONFIG_SLOW_WORK is not set CONFIG_HAVE_GENERIC_DMA_COHERENT=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -115,7 +120,6 @@ CONFIG_MODULE_FORCE_UNLOAD=y # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -161,6 +165,7 @@ CONFIG_CPU_SH4=y CONFIG_CPU_SUBTYPE_SH7760=y # CONFIG_CPU_SUBTYPE_SH4_202 is not set # CONFIG_CPU_SUBTYPE_SH7723 is not set +# CONFIG_CPU_SUBTYPE_SH7724 is not set # CONFIG_CPU_SUBTYPE_SH7763 is not set # CONFIG_CPU_SUBTYPE_SH7770 is not set # CONFIG_CPU_SUBTYPE_SH7780 is not set @@ -170,8 +175,6 @@ CONFIG_CPU_SUBTYPE_SH7760=y # CONFIG_CPU_SUBTYPE_SH7343 is not set # CONFIG_CPU_SUBTYPE_SH7722 is not set # CONFIG_CPU_SUBTYPE_SH7366 is not set -# CONFIG_CPU_SUBTYPE_SH5_101 is not set -# CONFIG_CPU_SUBTYPE_SH5_103 is not set # # Memory management options @@ -815,6 +818,7 @@ CONFIG_EXT2_FS_XATTR=y # CONFIG_EXT2_FS_SECURITY is not set CONFIG_EXT2_FS_XIP=y CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set @@ -839,6 +843,11 @@ CONFIG_INOTIFY_USER=y CONFIG_GENERIC_ACL=y # +# Caches +# +# CONFIG_FSCACHE is not set + +# # CD-ROM/DVD Filesystems # # CONFIG_ISO9660_FS is not set @@ -883,6 +892,7 @@ CONFIG_MISC_FILESYSTEMS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y # CONFIG_NFS_V3 is not set @@ -964,6 +974,9 @@ CONFIG_DEBUG_SHIRQ=y CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 # CONFIG_SCHED_DEBUG is not set # CONFIG_SCHEDSTATS is not set CONFIG_TIMER_STATS=y @@ -1001,6 +1014,7 @@ CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_TRACING_SUPPORT=y # # Tracers @@ -1010,9 +1024,14 @@ CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y # CONFIG_PREEMPT_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set # CONFIG_BOOT_TRACER is not set # CONFIG_TRACE_BRANCH_PROFILING is not set # CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set @@ -1126,6 +1145,7 @@ CONFIG_CRYPTO_DES=y # # CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y +# CONFIG_BINARY_PRINTF is not set # # Library routines diff --git a/arch/sh/configs/espt_defconfig b/arch/sh/configs/espt_defconfig index ebb4c37..c5b5007 100644 --- a/arch/sh/configs/espt_defconfig +++ b/arch/sh/configs/espt_defconfig @@ -1,10 +1,11 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29 -# Thu Apr 2 17:58:18 2009 +# Linux kernel version: 2.6.30-rc3 +# Mon Apr 27 12:46:26 2009 # CONFIG_SUPERH=y CONFIG_SUPERH32=y +# CONFIG_SUPERH64 is not set CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig" CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_GENERIC_BUG=y @@ -78,6 +79,7 @@ CONFIG_UID16=y # CONFIG_SYSCTL_SYSCALL is not set CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y @@ -106,6 +108,8 @@ CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_HAVE_CLK=y +CONFIG_HAVE_DMA_API_DEBUG=y +# CONFIG_SLOW_WORK is not set CONFIG_HAVE_GENERIC_DMA_COHERENT=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -117,7 +121,6 @@ CONFIG_MODULES=y # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -164,6 +167,7 @@ CONFIG_CPU_SH4A=y # CONFIG_CPU_SUBTYPE_SH7760 is not set # CONFIG_CPU_SUBTYPE_SH4_202 is not set # CONFIG_CPU_SUBTYPE_SH7723 is not set +# CONFIG_CPU_SUBTYPE_SH7724 is not set CONFIG_CPU_SUBTYPE_SH7763=y # CONFIG_CPU_SUBTYPE_SH7770 is not set # CONFIG_CPU_SUBTYPE_SH7780 is not set @@ -173,8 +177,6 @@ CONFIG_CPU_SUBTYPE_SH7763=y # CONFIG_CPU_SUBTYPE_SH7343 is not set # CONFIG_CPU_SUBTYPE_SH7722 is not set # CONFIG_CPU_SUBTYPE_SH7366 is not set -# CONFIG_CPU_SUBTYPE_SH5_101 is not set -# CONFIG_CPU_SUBTYPE_SH5_103 is not set # # Memory management options @@ -548,6 +550,7 @@ CONFIG_SCSI_WAIT_SCAN=m CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set # CONFIG_LIBFC is not set +# CONFIG_LIBFCOE is not set # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_DH is not set # CONFIG_SCSI_OSD_INITIATOR is not set @@ -919,6 +922,7 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set @@ -943,6 +947,11 @@ CONFIG_AUTOFS4_FS=y CONFIG_GENERIC_ACL=y # +# Caches +# +# CONFIG_FSCACHE is not set + +# # CD-ROM/DVD Filesystems # # CONFIG_ISO9660_FS is not set @@ -985,8 +994,13 @@ CONFIG_CRAMFS=y # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set CONFIG_ROMFS_FS=y +CONFIG_ROMFS_BACKED_BY_BLOCK=y +# CONFIG_ROMFS_BACKED_BY_MTD is not set +# CONFIG_ROMFS_BACKED_BY_BOTH is not set +CONFIG_ROMFS_ON_BLOCK=y # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y # CONFIG_NFS_V3 is not set @@ -1075,11 +1089,25 @@ CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_RING_BUFFER=y CONFIG_TRACING=y +CONFIG_TRACING_SUPPORT=y # # Tracers # +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_FTRACE_STARTUP_TEST is not set # CONFIG_DYNAMIC_DEBUG is not set +# CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_SH_STANDARD_BIOS is not set @@ -1179,6 +1207,7 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y +CONFIG_BINARY_PRINTF=y # # Library routines diff --git a/arch/sh/configs/hp6xx_defconfig b/arch/sh/configs/hp6xx_defconfig index 82b113a..8e13027 100644 --- a/arch/sh/configs/hp6xx_defconfig +++ b/arch/sh/configs/hp6xx_defconfig @@ -1,10 +1,11 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29 -# Thu Apr 2 18:01:05 2009 +# Linux kernel version: 2.6.30-rc3 +# Mon Apr 27 12:47:15 2009 # CONFIG_SUPERH=y CONFIG_SUPERH32=y +# CONFIG_SUPERH64 is not set CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig" CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_GENERIC_BUG=y @@ -67,6 +68,7 @@ CONFIG_UID16=y # CONFIG_SYSCTL_SYSCALL is not set CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y @@ -85,12 +87,15 @@ CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set # CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_HAVE_CLK=y +CONFIG_HAVE_DMA_API_DEBUG=y +# CONFIG_SLOW_WORK is not set CONFIG_HAVE_GENERIC_DMA_COHERENT=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -98,7 +103,6 @@ CONFIG_BASE_SMALL=0 # CONFIG_MODULES is not set CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -144,6 +148,7 @@ CONFIG_CPU_SUBTYPE_SH7709=y # CONFIG_CPU_SUBTYPE_SH7760 is not set # CONFIG_CPU_SUBTYPE_SH4_202 is not set # CONFIG_CPU_SUBTYPE_SH7723 is not set +# CONFIG_CPU_SUBTYPE_SH7724 is not set # CONFIG_CPU_SUBTYPE_SH7763 is not set # CONFIG_CPU_SUBTYPE_SH7770 is not set # CONFIG_CPU_SUBTYPE_SH7780 is not set @@ -153,8 +158,6 @@ CONFIG_CPU_SUBTYPE_SH7709=y # CONFIG_CPU_SUBTYPE_SH7343 is not set # CONFIG_CPU_SUBTYPE_SH7722 is not set # CONFIG_CPU_SUBTYPE_SH7366 is not set -# CONFIG_CPU_SUBTYPE_SH5_101 is not set -# CONFIG_CPU_SUBTYPE_SH5_103 is not set # # Memory management options @@ -385,6 +388,7 @@ CONFIG_BLK_DEV_SD=y # CONFIG_SCSI_SRP_ATTRS is not set CONFIG_SCSI_LOWLEVEL=y # CONFIG_LIBFC is not set +# CONFIG_LIBFCOE is not set # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_LOWLEVEL_PCMCIA is not set # CONFIG_SCSI_DH is not set @@ -431,6 +435,7 @@ CONFIG_KEYBOARD_HP6XX=y # CONFIG_INPUT_JOYSTICK is not set # CONFIG_INPUT_TABLET is not set CONFIG_INPUT_TOUCHSCREEN=y +# CONFIG_TOUCHSCREEN_AD7879 is not set # CONFIG_TOUCHSCREEN_FUJITSU is not set # CONFIG_TOUCHSCREEN_GUNZE is not set # CONFIG_TOUCHSCREEN_ELO is not set @@ -674,6 +679,11 @@ CONFIG_INOTIFY_USER=y # CONFIG_FUSE_FS is not set # +# Caches +# +# CONFIG_FSCACHE is not set + +# # CD-ROM/DVD Filesystems # # CONFIG_ISO9660_FS is not set @@ -719,6 +729,7 @@ CONFIG_MISC_FILESYSTEMS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set # # Partition Types @@ -786,10 +797,23 @@ CONFIG_FRAME_WARN=1024 CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_TRACING_SUPPORT=y # # Tracers # +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_SH_STANDARD_BIOS is not set @@ -898,6 +922,7 @@ CONFIG_CRYPTO_MD5=y # # CONFIG_CRYPTO_ANSI_CPRNG is not set # CONFIG_CRYPTO_HW is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines diff --git a/arch/sh/configs/landisk_defconfig b/arch/sh/configs/landisk_defconfig index b6fa4a7..7f549ae 100644 --- a/arch/sh/configs/landisk_defconfig +++ b/arch/sh/configs/landisk_defconfig @@ -1,10 +1,11 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29 -# Thu Apr 2 18:02:54 2009 +# Linux kernel version: 2.6.30-rc3 +# Mon Apr 27 12:47:48 2009 # CONFIG_SUPERH=y CONFIG_SUPERH32=y +# CONFIG_SUPERH64 is not set CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig" CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_GENERIC_BUG=y @@ -69,6 +70,7 @@ CONFIG_UID16=y # CONFIG_SYSCTL_SYSCALL is not set CONFIG_KALLSYMS=y CONFIG_KALLSYMS_EXTRA_PASS=y +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y @@ -88,6 +90,7 @@ CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set # CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_IOREMAP_PROT=y @@ -95,6 +98,8 @@ CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_HAVE_CLK=y +CONFIG_HAVE_DMA_API_DEBUG=y +# CONFIG_SLOW_WORK is not set CONFIG_HAVE_GENERIC_DMA_COHERENT=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -107,7 +112,6 @@ CONFIG_MODULE_FORCE_UNLOAD=y # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -153,6 +157,7 @@ CONFIG_CPU_SUBTYPE_SH7751R=y # CONFIG_CPU_SUBTYPE_SH7760 is not set # CONFIG_CPU_SUBTYPE_SH4_202 is not set # CONFIG_CPU_SUBTYPE_SH7723 is not set +# CONFIG_CPU_SUBTYPE_SH7724 is not set # CONFIG_CPU_SUBTYPE_SH7763 is not set # CONFIG_CPU_SUBTYPE_SH7770 is not set # CONFIG_CPU_SUBTYPE_SH7780 is not set @@ -162,8 +167,6 @@ CONFIG_CPU_SUBTYPE_SH7751R=y # CONFIG_CPU_SUBTYPE_SH7343 is not set # CONFIG_CPU_SUBTYPE_SH7722 is not set # CONFIG_CPU_SUBTYPE_SH7366 is not set -# CONFIG_CPU_SUBTYPE_SH5_101 is not set -# CONFIG_CPU_SUBTYPE_SH5_103 is not set # # Memory management options @@ -292,8 +295,6 @@ CONFIG_BOOT_LINK_OFFSET=0x00800000 # CONFIG_PCI=y CONFIG_SH_PCIDMA_NONCOHERENT=y -CONFIG_PCI_AUTO=y -CONFIG_PCI_AUTO_UPDATE_RESOURCES=y # CONFIG_PCIEPORTBUS is not set # CONFIG_ARCH_SUPPORTS_MSI is not set CONFIG_PCI_LEGACY=y @@ -602,6 +603,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_MPT2SAS is not set # CONFIG_SCSI_HPTIOP is not set # CONFIG_LIBFC is not set +# CONFIG_LIBFCOE is not set # CONFIG_FCOE is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set @@ -706,6 +708,7 @@ CONFIG_NETDEV_1000=y # CONFIG_E1000E is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set +# CONFIG_IGBVF is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -729,6 +732,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set +# CONFIG_VXGE is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set # CONFIG_NIU is not set @@ -922,6 +926,7 @@ CONFIG_VIDEO_HELPER_CHIPS_AUTO=y # CONFIG_SOC_CAMERA is not set CONFIG_V4L_USB_DRIVERS=y # CONFIG_USB_VIDEO_CLASS is not set +CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y # CONFIG_USB_GSPCA is not set # CONFIG_VIDEO_HDPVR is not set CONFIG_VIDEO_USBVIDEO=m @@ -994,15 +999,17 @@ CONFIG_USB_HID=m # # Special HID drivers # -CONFIG_HID_COMPAT=y CONFIG_HID_A4TECH=m CONFIG_HID_APPLE=m CONFIG_HID_BELKIN=m CONFIG_HID_CHERRY=m CONFIG_HID_CHICONY=m CONFIG_HID_CYPRESS=m +# CONFIG_DRAGONRISE_FF is not set CONFIG_HID_EZKEY=m +# CONFIG_HID_KYE is not set CONFIG_HID_GYRATION=m +# CONFIG_HID_KENSINGTON is not set CONFIG_HID_LOGITECH=m # CONFIG_LOGITECH_FF is not set # CONFIG_LOGIRUMBLEPAD2_FF is not set @@ -1197,6 +1204,7 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set @@ -1222,6 +1230,11 @@ CONFIG_INOTIFY_USER=y # CONFIG_FUSE_FS is not set # +# Caches +# +# CONFIG_FSCACHE is not set + +# # CD-ROM/DVD Filesystems # CONFIG_ISO9660_FS=m @@ -1270,10 +1283,15 @@ CONFIG_MISC_FILESYSTEMS=y # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set CONFIG_ROMFS_FS=y +CONFIG_ROMFS_BACKED_BY_BLOCK=y +# CONFIG_ROMFS_BACKED_BY_MTD is not set +# CONFIG_ROMFS_BACKED_BY_BOTH is not set +CONFIG_ROMFS_ON_BLOCK=y # CONFIG_SYSV_FS is not set CONFIG_UFS_FS=m # CONFIG_UFS_FS_WRITE is not set # CONFIG_UFS_DEBUG is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=m CONFIG_NFS_V3=y @@ -1364,10 +1382,23 @@ CONFIG_FRAME_WARN=1024 CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_TRACING_SUPPORT=y # # Tracers # +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y CONFIG_SH_STANDARD_BIOS=y @@ -1469,6 +1500,7 @@ CONFIG_CRYPTO=y # CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines diff --git a/arch/sh/configs/lboxre2_defconfig b/arch/sh/configs/lboxre2_defconfig index 92c515c..a7db539 100644 --- a/arch/sh/configs/lboxre2_defconfig +++ b/arch/sh/configs/lboxre2_defconfig @@ -1,10 +1,11 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29 -# Thu Apr 2 18:06:51 2009 +# Linux kernel version: 2.6.30-rc3 +# Mon Apr 27 12:48:54 2009 # CONFIG_SUPERH=y CONFIG_SUPERH32=y +# CONFIG_SUPERH64 is not set CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig" CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_GENERIC_BUG=y @@ -69,6 +70,7 @@ CONFIG_UID16=y # CONFIG_SYSCTL_SYSCALL is not set CONFIG_KALLSYMS=y CONFIG_KALLSYMS_EXTRA_PASS=y +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y @@ -88,6 +90,7 @@ CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set # CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_IOREMAP_PROT=y @@ -95,6 +98,8 @@ CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_HAVE_CLK=y +CONFIG_HAVE_DMA_API_DEBUG=y +# CONFIG_SLOW_WORK is not set CONFIG_HAVE_GENERIC_DMA_COHERENT=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -107,7 +112,6 @@ CONFIG_MODULE_FORCE_UNLOAD=y # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -153,6 +157,7 @@ CONFIG_CPU_SUBTYPE_SH7751R=y # CONFIG_CPU_SUBTYPE_SH7760 is not set # CONFIG_CPU_SUBTYPE_SH4_202 is not set # CONFIG_CPU_SUBTYPE_SH7723 is not set +# CONFIG_CPU_SUBTYPE_SH7724 is not set # CONFIG_CPU_SUBTYPE_SH7763 is not set # CONFIG_CPU_SUBTYPE_SH7770 is not set # CONFIG_CPU_SUBTYPE_SH7780 is not set @@ -162,8 +167,6 @@ CONFIG_CPU_SUBTYPE_SH7751R=y # CONFIG_CPU_SUBTYPE_SH7343 is not set # CONFIG_CPU_SUBTYPE_SH7722 is not set # CONFIG_CPU_SUBTYPE_SH7366 is not set -# CONFIG_CPU_SUBTYPE_SH5_101 is not set -# CONFIG_CPU_SUBTYPE_SH5_103 is not set # # Memory management options @@ -293,8 +296,6 @@ CONFIG_CMDLINE="console=ttySC1,115200 root=/dev/sda1" # CONFIG_PCI=y CONFIG_SH_PCIDMA_NONCOHERENT=y -CONFIG_PCI_AUTO=y -CONFIG_PCI_AUTO_UPDATE_RESOURCES=y # CONFIG_PCIEPORTBUS is not set # CONFIG_ARCH_SUPPORTS_MSI is not set CONFIG_PCI_LEGACY=y @@ -542,6 +543,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_MPT2SAS is not set # CONFIG_SCSI_HPTIOP is not set # CONFIG_LIBFC is not set +# CONFIG_LIBFCOE is not set # CONFIG_FCOE is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set @@ -702,6 +704,7 @@ CONFIG_NETDEV_1000=y # CONFIG_E1000E is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set +# CONFIG_IGBVF is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -725,6 +728,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set +# CONFIG_VXGE is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set # CONFIG_NIU is not set @@ -931,7 +935,6 @@ CONFIG_HID=y # # Special HID drivers # -CONFIG_HID_COMPAT=y CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y @@ -1007,6 +1010,7 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set @@ -1029,6 +1033,11 @@ CONFIG_INOTIFY_USER=y # CONFIG_FUSE_FS is not set # +# Caches +# +# CONFIG_FSCACHE is not set + +# # CD-ROM/DVD Filesystems # # CONFIG_ISO9660_FS is not set @@ -1073,8 +1082,13 @@ CONFIG_MISC_FILESYSTEMS=y # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set CONFIG_ROMFS_FS=y +CONFIG_ROMFS_BACKED_BY_BLOCK=y +# CONFIG_ROMFS_BACKED_BY_MTD is not set +# CONFIG_ROMFS_BACKED_BY_BOTH is not set +CONFIG_ROMFS_ON_BLOCK=y # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y # CONFIG_NFS_FS is not set # CONFIG_NFSD is not set @@ -1151,10 +1165,23 @@ CONFIG_FRAME_WARN=1024 CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_TRACING_SUPPORT=y # # Tracers # +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y CONFIG_SH_STANDARD_BIOS=y @@ -1256,6 +1283,7 @@ CONFIG_CRYPTO=y # CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines diff --git a/arch/sh/configs/magicpanelr2_defconfig b/arch/sh/configs/magicpanelr2_defconfig index 26586c2..58bec61 100644 --- a/arch/sh/configs/magicpanelr2_defconfig +++ b/arch/sh/configs/magicpanelr2_defconfig @@ -1,10 +1,11 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29 -# Thu Apr 2 18:07:39 2009 +# Linux kernel version: 2.6.30-rc3 +# Mon Apr 27 12:49:32 2009 # CONFIG_SUPERH=y CONFIG_SUPERH32=y +# CONFIG_SUPERH64 is not set CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig" CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_GENERIC_BUG=y @@ -39,6 +40,7 @@ CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y +CONFIG_POSIX_MQUEUE_SYSCTL=y CONFIG_BSD_PROCESS_ACCT=y CONFIG_BSD_PROCESS_ACCT_V3=y # CONFIG_TASKSTATS is not set @@ -66,7 +68,6 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_RD_GZIP=y # CONFIG_RD_BZIP2 is not set # CONFIG_RD_LZMA is not set -CONFIG_INITRAMFS_COMPRESSION_NONE=y # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y CONFIG_ANON_INODES=y @@ -76,6 +77,7 @@ CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y # CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y @@ -94,6 +96,7 @@ CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set # CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_IOREMAP_PROT=y @@ -101,6 +104,8 @@ CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_HAVE_CLK=y +CONFIG_HAVE_DMA_API_DEBUG=y +# CONFIG_SLOW_WORK is not set CONFIG_HAVE_GENERIC_DMA_COHERENT=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -113,7 +118,6 @@ CONFIG_MODVERSIONS=y CONFIG_MODULE_SRCVERSION_ALL=y CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -159,6 +163,7 @@ CONFIG_CPU_SUBTYPE_SH7720=y # CONFIG_CPU_SUBTYPE_SH7760 is not set # CONFIG_CPU_SUBTYPE_SH4_202 is not set # CONFIG_CPU_SUBTYPE_SH7723 is not set +# CONFIG_CPU_SUBTYPE_SH7724 is not set # CONFIG_CPU_SUBTYPE_SH7763 is not set # CONFIG_CPU_SUBTYPE_SH7770 is not set # CONFIG_CPU_SUBTYPE_SH7780 is not set @@ -168,8 +173,6 @@ CONFIG_CPU_SUBTYPE_SH7720=y # CONFIG_CPU_SUBTYPE_SH7343 is not set # CONFIG_CPU_SUBTYPE_SH7722 is not set # CONFIG_CPU_SUBTYPE_SH7366 is not set -# CONFIG_CPU_SUBTYPE_SH5_101 is not set -# CONFIG_CPU_SUBTYPE_SH5_103 is not set # # Memory management options @@ -813,6 +816,7 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set # CONFIG_EXT3_FS_XATTR is not set # CONFIG_EXT4_FS is not set CONFIG_JBD=y @@ -831,6 +835,11 @@ CONFIG_FILE_LOCKING=y # CONFIG_FUSE_FS is not set # +# Caches +# +# CONFIG_FSCACHE is not set + +# # CD-ROM/DVD Filesystems # # CONFIG_ISO9660_FS is not set @@ -884,6 +893,7 @@ CONFIG_JFFS2_RTIME=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -965,6 +975,7 @@ CONFIG_MAGIC_SYSRQ=y CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_SHIRQ is not set # CONFIG_DETECT_SOFTLOCKUP is not set +# CONFIG_DETECT_HUNG_TASK is not set # CONFIG_SCHED_DEBUG is not set # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set @@ -1000,6 +1011,7 @@ CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_TRACING_SUPPORT=y # # Tracers @@ -1008,9 +1020,14 @@ CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y # CONFIG_IRQSOFF_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set # CONFIG_BOOT_TRACER is not set # CONFIG_TRACE_BRANCH_PROFILING is not set # CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set @@ -1035,6 +1052,7 @@ CONFIG_DUMP_CODE=y # CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set # CONFIG_CRYPTO is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines diff --git a/arch/sh/configs/microdev_defconfig b/arch/sh/configs/microdev_defconfig index 7517835..2886fc8 100644 --- a/arch/sh/configs/microdev_defconfig +++ b/arch/sh/configs/microdev_defconfig @@ -1,10 +1,11 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29 -# Thu Apr 2 18:11:13 2009 +# Linux kernel version: 2.6.30-rc3 +# Mon Apr 27 12:50:51 2009 # CONFIG_SUPERH=y CONFIG_SUPERH32=y +# CONFIG_SUPERH64 is not set CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig" CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_GENERIC_BUG=y @@ -65,7 +66,6 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_RD_GZIP=y # CONFIG_RD_BZIP2 is not set # CONFIG_RD_LZMA is not set -CONFIG_INITRAMFS_COMPRESSION_NONE=y # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y CONFIG_ANON_INODES=y @@ -74,6 +74,7 @@ CONFIG_UID16=y # CONFIG_SYSCTL_SYSCALL is not set CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y @@ -92,12 +93,15 @@ CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set # CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_HAVE_CLK=y +CONFIG_HAVE_DMA_API_DEBUG=y +# CONFIG_SLOW_WORK is not set CONFIG_HAVE_GENERIC_DMA_COHERENT=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -105,7 +109,6 @@ CONFIG_BASE_SMALL=0 # CONFIG_MODULES is not set CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -151,6 +154,7 @@ CONFIG_CPU_SH4=y # CONFIG_CPU_SUBTYPE_SH7760 is not set CONFIG_CPU_SUBTYPE_SH4_202=y # CONFIG_CPU_SUBTYPE_SH7723 is not set +# CONFIG_CPU_SUBTYPE_SH7724 is not set # CONFIG_CPU_SUBTYPE_SH7763 is not set # CONFIG_CPU_SUBTYPE_SH7770 is not set # CONFIG_CPU_SUBTYPE_SH7780 is not set @@ -160,8 +164,6 @@ CONFIG_CPU_SUBTYPE_SH4_202=y # CONFIG_CPU_SUBTYPE_SH7343 is not set # CONFIG_CPU_SUBTYPE_SH7722 is not set # CONFIG_CPU_SUBTYPE_SH7366 is not set -# CONFIG_CPU_SUBTYPE_SH5_101 is not set -# CONFIG_CPU_SUBTYPE_SH5_103 is not set # # Memory management options @@ -647,6 +649,7 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set @@ -669,6 +672,11 @@ CONFIG_INOTIFY_USER=y # CONFIG_FUSE_FS is not set # +# Caches +# +# CONFIG_FSCACHE is not set + +# # CD-ROM/DVD Filesystems # # CONFIG_ISO9660_FS is not set @@ -715,6 +723,7 @@ CONFIG_MISC_FILESYSTEMS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -802,10 +811,24 @@ CONFIG_FRAME_WARN=1024 CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_TRACING_SUPPORT=y # # Tracers # +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set +# CONFIG_PREEMPT_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_SH_STANDARD_BIOS is not set @@ -914,6 +937,7 @@ CONFIG_CRYPTO_DES=y # # CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y +# CONFIG_BINARY_PRINTF is not set # # Library routines diff --git a/arch/sh/configs/migor_defconfig b/arch/sh/configs/migor_defconfig index a8720f9..8ecceb4 100644 --- a/arch/sh/configs/migor_defconfig +++ b/arch/sh/configs/migor_defconfig @@ -1,10 +1,11 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29 -# Thu Apr 2 18:14:03 2009 +# Linux kernel version: 2.6.30-rc3 +# Mon Apr 27 12:51:34 2009 # CONFIG_SUPERH=y CONFIG_SUPERH32=y +# CONFIG_SUPERH64 is not set CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig" CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_GENERIC_BUG=y @@ -67,7 +68,6 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_RD_GZIP=y # CONFIG_RD_BZIP2 is not set # CONFIG_RD_LZMA is not set -CONFIG_INITRAMFS_COMPRESSION_NONE=y # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y CONFIG_ANON_INODES=y @@ -76,6 +76,7 @@ CONFIG_UID16=y # CONFIG_SYSCTL_SYSCALL is not set CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y @@ -104,6 +105,8 @@ CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_HAVE_CLK=y +CONFIG_HAVE_DMA_API_DEBUG=y +# CONFIG_SLOW_WORK is not set CONFIG_HAVE_GENERIC_DMA_COHERENT=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -115,7 +118,6 @@ CONFIG_MODULES=y # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -165,6 +167,7 @@ CONFIG_ARCH_SHMOBILE=y # CONFIG_CPU_SUBTYPE_SH7760 is not set # CONFIG_CPU_SUBTYPE_SH4_202 is not set # CONFIG_CPU_SUBTYPE_SH7723 is not set +# CONFIG_CPU_SUBTYPE_SH7724 is not set # CONFIG_CPU_SUBTYPE_SH7763 is not set # CONFIG_CPU_SUBTYPE_SH7770 is not set # CONFIG_CPU_SUBTYPE_SH7780 is not set @@ -174,8 +177,6 @@ CONFIG_ARCH_SHMOBILE=y # CONFIG_CPU_SUBTYPE_SH7343 is not set CONFIG_CPU_SUBTYPE_SH7722=y # CONFIG_CPU_SUBTYPE_SH7366 is not set -# CONFIG_CPU_SUBTYPE_SH5_101 is not set -# CONFIG_CPU_SUBTYPE_SH5_103 is not set # # Memory management options @@ -577,6 +578,7 @@ CONFIG_SCSI_WAIT_SCAN=m CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set # CONFIG_LIBFC is not set +# CONFIG_LIBFCOE is not set # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_DH is not set # CONFIG_SCSI_OSD_INITIATOR is not set @@ -873,7 +875,6 @@ CONFIG_HID=y # # Special HID drivers # -CONFIG_HID_COMPAT=y CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y # CONFIG_USB_ARCH_HAS_OHCI is not set @@ -1012,6 +1013,11 @@ CONFIG_FILE_LOCKING=y # CONFIG_FUSE_FS is not set # +# Caches +# +# CONFIG_FSCACHE is not set + +# # CD-ROM/DVD Filesystems # # CONFIG_ISO9660_FS is not set @@ -1056,6 +1062,7 @@ CONFIG_MISC_FILESYSTEMS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y # CONFIG_NFS_V3 is not set @@ -1105,11 +1112,25 @@ CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_RING_BUFFER=y CONFIG_TRACING=y +CONFIG_TRACING_SUPPORT=y # # Tracers # +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_FTRACE_STARTUP_TEST is not set # CONFIG_DYNAMIC_DEBUG is not set +# CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_SH_STANDARD_BIOS is not set @@ -1218,6 +1239,7 @@ CONFIG_CRYPTO_WORKQUEUE=y # # CONFIG_CRYPTO_ANSI_CPRNG is not set # CONFIG_CRYPTO_HW is not set +CONFIG_BINARY_PRINTF=y # # Library routines diff --git a/arch/sh/configs/polaris_defconfig b/arch/sh/configs/polaris_defconfig index df2d177d..2b95072 100644 --- a/arch/sh/configs/polaris_defconfig +++ b/arch/sh/configs/polaris_defconfig @@ -1,10 +1,11 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29 -# Thu Apr 2 18:16:48 2009 +# Linux kernel version: 2.6.30-rc3 +# Mon Apr 27 12:52:19 2009 # CONFIG_SUPERH=y CONFIG_SUPERH32=y +# CONFIG_SUPERH64 is not set CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig" CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_GENERIC_BUG=y @@ -40,6 +41,7 @@ CONFIG_LOCALVERSION="" CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y +CONFIG_POSIX_MQUEUE_SYSCTL=y CONFIG_BSD_PROCESS_ACCT=y CONFIG_BSD_PROCESS_ACCT_V3=y # CONFIG_TASKSTATS is not set @@ -76,6 +78,7 @@ CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y # CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y @@ -94,6 +97,7 @@ CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set # CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_IOREMAP_PROT=y @@ -101,6 +105,8 @@ CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_HAVE_CLK=y +CONFIG_HAVE_DMA_API_DEBUG=y +# CONFIG_SLOW_WORK is not set CONFIG_HAVE_GENERIC_DMA_COHERENT=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -113,7 +119,6 @@ CONFIG_MODVERSIONS=y # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -159,6 +164,7 @@ CONFIG_CPU_SUBTYPE_SH7709=y # CONFIG_CPU_SUBTYPE_SH7760 is not set # CONFIG_CPU_SUBTYPE_SH4_202 is not set # CONFIG_CPU_SUBTYPE_SH7723 is not set +# CONFIG_CPU_SUBTYPE_SH7724 is not set # CONFIG_CPU_SUBTYPE_SH7763 is not set # CONFIG_CPU_SUBTYPE_SH7770 is not set # CONFIG_CPU_SUBTYPE_SH7780 is not set @@ -168,8 +174,6 @@ CONFIG_CPU_SUBTYPE_SH7709=y # CONFIG_CPU_SUBTYPE_SH7343 is not set # CONFIG_CPU_SUBTYPE_SH7722 is not set # CONFIG_CPU_SUBTYPE_SH7366 is not set -# CONFIG_CPU_SUBTYPE_SH5_101 is not set -# CONFIG_CPU_SUBTYPE_SH5_103 is not set # # Memory management options @@ -778,6 +782,11 @@ CONFIG_FILE_LOCKING=y # CONFIG_FUSE_FS is not set # +# Caches +# +# CONFIG_FSCACHE is not set + +# # CD-ROM/DVD Filesystems # # CONFIG_ISO9660_FS is not set @@ -831,6 +840,7 @@ CONFIG_JFFS2_RTIME=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -874,6 +884,9 @@ CONFIG_DEBUG_SHIRQ=y CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 # CONFIG_SCHED_DEBUG is not set # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set @@ -914,6 +927,7 @@ CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_TRACING_SUPPORT=y # # Tracers @@ -923,9 +937,14 @@ CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y # CONFIG_PREEMPT_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set # CONFIG_BOOT_TRACER is not set # CONFIG_TRACE_BRANCH_PROFILING is not set # CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set @@ -950,6 +969,7 @@ CONFIG_DUMP_CODE=y # CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set # CONFIG_CRYPTO is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines diff --git a/arch/sh/configs/r7780mp_defconfig b/arch/sh/configs/r7780mp_defconfig index 7def4df..68e5eff 100644 --- a/arch/sh/configs/r7780mp_defconfig +++ b/arch/sh/configs/r7780mp_defconfig @@ -1,10 +1,11 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29 -# Thu Apr 2 18:20:17 2009 +# Linux kernel version: 2.6.30-rc3 +# Mon Apr 27 12:53:28 2009 # CONFIG_SUPERH=y CONFIG_SUPERH32=y +# CONFIG_SUPERH64 is not set CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig" CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_GENERIC_BUG=y @@ -78,6 +79,7 @@ CONFIG_UID16=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y @@ -107,6 +109,8 @@ CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_HAVE_CLK=y +CONFIG_HAVE_DMA_API_DEBUG=y +# CONFIG_SLOW_WORK is not set CONFIG_HAVE_GENERIC_DMA_COHERENT=y CONFIG_SLABINFO=y CONFIG_BASE_SMALL=0 @@ -118,7 +122,6 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -165,6 +168,7 @@ CONFIG_CPU_SH4A=y # CONFIG_CPU_SUBTYPE_SH7760 is not set # CONFIG_CPU_SUBTYPE_SH4_202 is not set # CONFIG_CPU_SUBTYPE_SH7723 is not set +# CONFIG_CPU_SUBTYPE_SH7724 is not set # CONFIG_CPU_SUBTYPE_SH7763 is not set # CONFIG_CPU_SUBTYPE_SH7770 is not set CONFIG_CPU_SUBTYPE_SH7780=y @@ -174,8 +178,6 @@ CONFIG_CPU_SUBTYPE_SH7780=y # CONFIG_CPU_SUBTYPE_SH7343 is not set # CONFIG_CPU_SUBTYPE_SH7722 is not set # CONFIG_CPU_SUBTYPE_SH7366 is not set -# CONFIG_CPU_SUBTYPE_SH5_101 is not set -# CONFIG_CPU_SUBTYPE_SH5_103 is not set # # Memory management options @@ -313,8 +315,6 @@ CONFIG_CMDLINE="console=ttySC0,115200 root=/dev/sda1" # CONFIG_PCI=y CONFIG_SH_PCIDMA_NONCOHERENT=y -CONFIG_PCI_AUTO=y -CONFIG_PCI_AUTO_UPDATE_RESOURCES=y # CONFIG_PCIEPORTBUS is not set # CONFIG_ARCH_SUPPORTS_MSI is not set CONFIG_PCI_LEGACY=y @@ -536,6 +536,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_MPT2SAS is not set # CONFIG_SCSI_HPTIOP is not set # CONFIG_LIBFC is not set +# CONFIG_LIBFCOE is not set # CONFIG_FCOE is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set @@ -696,6 +697,7 @@ CONFIG_E1000=m # CONFIG_E1000E is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set +# CONFIG_IGBVF is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -719,6 +721,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set +# CONFIG_VXGE is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set # CONFIG_NIU is not set @@ -920,6 +923,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_F71805F is not set # CONFIG_SENSORS_F71882FG is not set # CONFIG_SENSORS_F75375S is not set +# CONFIG_SENSORS_G760A is not set # CONFIG_SENSORS_GL518SM is not set # CONFIG_SENSORS_GL520SM is not set # CONFIG_SENSORS_IT87 is not set @@ -1027,7 +1031,6 @@ CONFIG_HID=y # # Special HID drivers # -CONFIG_HID_COMPAT=y CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y @@ -1120,6 +1123,7 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set @@ -1143,6 +1147,11 @@ CONFIG_INOTIFY_USER=y CONFIG_FUSE_FS=m # +# Caches +# +# CONFIG_FSCACHE is not set + +# # CD-ROM/DVD Filesystems # # CONFIG_ISO9660_FS is not set @@ -1191,6 +1200,7 @@ CONFIG_MINIX_FS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -1279,6 +1289,9 @@ CONFIG_DEBUG_KERNEL=y CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set @@ -1316,6 +1329,7 @@ CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_RING_BUFFER=y CONFIG_TRACING=y +CONFIG_TRACING_SUPPORT=y # # Tracers @@ -1325,11 +1339,16 @@ CONFIG_TRACING=y # CONFIG_PREEMPT_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set # CONFIG_BOOT_TRACER is not set # CONFIG_TRACE_BRANCH_PROFILING is not set # CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_FTRACE_STARTUP_TEST is not set # CONFIG_DYNAMIC_DEBUG is not set +# CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set @@ -1449,6 +1468,7 @@ CONFIG_CRYPTO_DES=y # CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set +CONFIG_BINARY_PRINTF=y # # Library routines diff --git a/arch/sh/configs/r7785rp_defconfig b/arch/sh/configs/r7785rp_defconfig index cb134ff..890fe3c 100644 --- a/arch/sh/configs/r7785rp_defconfig +++ b/arch/sh/configs/r7785rp_defconfig @@ -1,10 +1,11 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29 -# Thu Apr 2 18:24:35 2009 +# Linux kernel version: 2.6.30-rc3 +# Mon Apr 27 12:55:10 2009 # CONFIG_SUPERH=y CONFIG_SUPERH32=y +# CONFIG_SUPERH64 is not set CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig" CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_GENERIC_BUG=y @@ -43,6 +44,7 @@ CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y +CONFIG_POSIX_MQUEUE_SYSCTL=y CONFIG_BSD_PROCESS_ACCT=y # CONFIG_BSD_PROCESS_ACCT_V3 is not set # CONFIG_TASKSTATS is not set @@ -78,6 +80,7 @@ CONFIG_UID16=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y # CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y @@ -108,6 +111,8 @@ CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_HAVE_CLK=y +CONFIG_HAVE_DMA_API_DEBUG=y +# CONFIG_SLOW_WORK is not set CONFIG_HAVE_GENERIC_DMA_COHERENT=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -120,7 +125,6 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -168,6 +172,7 @@ CONFIG_CPU_SHX2=y # CONFIG_CPU_SUBTYPE_SH7760 is not set # CONFIG_CPU_SUBTYPE_SH4_202 is not set # CONFIG_CPU_SUBTYPE_SH7723 is not set +# CONFIG_CPU_SUBTYPE_SH7724 is not set # CONFIG_CPU_SUBTYPE_SH7763 is not set # CONFIG_CPU_SUBTYPE_SH7770 is not set # CONFIG_CPU_SUBTYPE_SH7780 is not set @@ -177,8 +182,6 @@ CONFIG_CPU_SUBTYPE_SH7785=y # CONFIG_CPU_SUBTYPE_SH7343 is not set # CONFIG_CPU_SUBTYPE_SH7722 is not set # CONFIG_CPU_SUBTYPE_SH7366 is not set -# CONFIG_CPU_SUBTYPE_SH5_101 is not set -# CONFIG_CPU_SUBTYPE_SH5_103 is not set # # Memory management options @@ -337,8 +340,6 @@ CONFIG_CMDLINE="console=ttySC0,115200 root=/dev/sda1" # CONFIG_PCI=y CONFIG_SH_PCIDMA_NONCOHERENT=y -CONFIG_PCI_AUTO=y -CONFIG_PCI_AUTO_UPDATE_RESOURCES=y # CONFIG_PCIEPORTBUS is not set # CONFIG_ARCH_SUPPORTS_MSI is not set # CONFIG_PCI_LEGACY is not set @@ -561,6 +562,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_MPT2SAS is not set # CONFIG_SCSI_HPTIOP is not set # CONFIG_LIBFC is not set +# CONFIG_LIBFCOE is not set # CONFIG_FCOE is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set @@ -698,6 +700,7 @@ CONFIG_NETDEV_1000=y # CONFIG_E1000E is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set +# CONFIG_IGBVF is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -721,6 +724,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set +# CONFIG_VXGE is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set # CONFIG_NIU is not set @@ -948,6 +952,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_F71805F is not set # CONFIG_SENSORS_F71882FG is not set # CONFIG_SENSORS_F75375S is not set +# CONFIG_SENSORS_G760A is not set # CONFIG_SENSORS_GL518SM is not set # CONFIG_SENSORS_GL520SM is not set # CONFIG_SENSORS_IT87 is not set @@ -970,6 +975,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_PC87427 is not set # CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_SHT15 is not set # CONFIG_SENSORS_SIS5595 is not set # CONFIG_SENSORS_DME1737 is not set # CONFIG_SENSORS_SMSC47M1 is not set @@ -1109,7 +1115,6 @@ CONFIG_HID=y # # Special HID drivers # -CONFIG_HID_COMPAT=y CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y @@ -1202,6 +1207,7 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set @@ -1225,6 +1231,11 @@ CONFIG_INOTIFY_USER=y CONFIG_FUSE_FS=m # +# Caches +# +# CONFIG_FSCACHE is not set + +# # CD-ROM/DVD Filesystems # # CONFIG_ISO9660_FS is not set @@ -1273,6 +1284,7 @@ CONFIG_MINIX_FS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -1359,6 +1371,7 @@ CONFIG_DEBUG_FS=y CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_SHIRQ is not set # CONFIG_DETECT_SOFTLOCKUP is not set +# CONFIG_DETECT_HUNG_TASK is not set CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set @@ -1401,6 +1414,7 @@ CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_RING_BUFFER=y CONFIG_TRACING=y +CONFIG_TRACING_SUPPORT=y # # Tracers @@ -1410,11 +1424,16 @@ CONFIG_TRACING=y # CONFIG_PREEMPT_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set # CONFIG_BOOT_TRACER is not set # CONFIG_TRACE_BRANCH_PROFILING is not set # CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_FTRACE_STARTUP_TEST is not set # CONFIG_DYNAMIC_DEBUG is not set +# CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set @@ -1534,6 +1553,7 @@ CONFIG_CRYPTO_DES=y # CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set +CONFIG_BINARY_PRINTF=y # # Library routines diff --git a/arch/sh/configs/rsk7201_defconfig b/arch/sh/configs/rsk7201_defconfig index a037c74..fa43957 100644 --- a/arch/sh/configs/rsk7201_defconfig +++ b/arch/sh/configs/rsk7201_defconfig @@ -1,10 +1,11 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29 -# Thu Apr 2 18:29:08 2009 +# Linux kernel version: 2.6.30-rc3 +# Mon Apr 27 12:56:29 2009 # CONFIG_SUPERH=y CONFIG_SUPERH32=y +# CONFIG_SUPERH64 is not set CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig" CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_GENERIC_BUG=y @@ -65,7 +66,6 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_RD_GZIP=y # CONFIG_RD_BZIP2 is not set # CONFIG_RD_LZMA is not set -CONFIG_INITRAMFS_COMPRESSION_NONE=y CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=y CONFIG_ANON_INODES=y @@ -74,6 +74,7 @@ CONFIG_UID16=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y @@ -100,6 +101,8 @@ CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_HAVE_CLK=y +CONFIG_HAVE_DMA_API_DEBUG=y +# CONFIG_SLOW_WORK is not set CONFIG_HAVE_GENERIC_DMA_COHERENT=y CONFIG_RT_MUTEXES=y CONFIG_BASE_SMALL=0 @@ -110,7 +113,6 @@ CONFIG_MODULES=y # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -157,6 +159,7 @@ CONFIG_CPU_SUBTYPE_SH7201=y # CONFIG_CPU_SUBTYPE_SH7760 is not set # CONFIG_CPU_SUBTYPE_SH4_202 is not set # CONFIG_CPU_SUBTYPE_SH7723 is not set +# CONFIG_CPU_SUBTYPE_SH7724 is not set # CONFIG_CPU_SUBTYPE_SH7763 is not set # CONFIG_CPU_SUBTYPE_SH7770 is not set # CONFIG_CPU_SUBTYPE_SH7780 is not set @@ -166,8 +169,6 @@ CONFIG_CPU_SUBTYPE_SH7201=y # CONFIG_CPU_SUBTYPE_SH7343 is not set # CONFIG_CPU_SUBTYPE_SH7722 is not set # CONFIG_CPU_SUBTYPE_SH7366 is not set -# CONFIG_CPU_SUBTYPE_SH5_101 is not set -# CONFIG_CPU_SUBTYPE_SH5_103 is not set # # Memory management options @@ -603,6 +604,11 @@ CONFIG_EXT2_FS=y # CONFIG_FUSE_FS is not set # +# Caches +# +# CONFIG_FSCACHE is not set + +# # CD-ROM/DVD Filesystems # # CONFIG_ISO9660_FS is not set @@ -651,8 +657,13 @@ CONFIG_JFFS2_RTIME=y # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set CONFIG_ROMFS_FS=y +CONFIG_ROMFS_BACKED_BY_BLOCK=y +# CONFIG_ROMFS_BACKED_BY_MTD is not set +# CONFIG_ROMFS_BACKED_BY_BOTH is not set +CONFIG_ROMFS_ON_BLOCK=y # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set # # Partition Types @@ -686,11 +697,24 @@ CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_RING_BUFFER=y CONFIG_TRACING=y +CONFIG_TRACING_SUPPORT=y # # Tracers # +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_FTRACE_STARTUP_TEST is not set # CONFIG_DYNAMIC_DEBUG is not set +# CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_SH_STANDARD_BIOS is not set @@ -705,6 +729,7 @@ CONFIG_HAVE_ARCH_KGDB=y # CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set # CONFIG_CRYPTO is not set +CONFIG_BINARY_PRINTF=y # # Library routines diff --git a/arch/sh/configs/rsk7203_defconfig b/arch/sh/configs/rsk7203_defconfig index 9ae28e8..e3a65f8 100644 --- a/arch/sh/configs/rsk7203_defconfig +++ b/arch/sh/configs/rsk7203_defconfig @@ -1,10 +1,11 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29 -# Thu Apr 2 18:30:34 2009 +# Linux kernel version: 2.6.30-rc3 +# Mon Apr 27 12:57:06 2009 # CONFIG_SUPERH=y CONFIG_SUPERH32=y +# CONFIG_SUPERH64 is not set CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig" CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_GENERIC_BUG=y @@ -39,6 +40,7 @@ CONFIG_LOCALVERSION="" CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y +CONFIG_POSIX_MQUEUE_SYSCTL=y CONFIG_BSD_PROCESS_ACCT=y # CONFIG_BSD_PROCESS_ACCT_V3 is not set # CONFIG_TASKSTATS is not set @@ -70,7 +72,6 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_RD_GZIP=y # CONFIG_RD_BZIP2 is not set # CONFIG_RD_LZMA is not set -CONFIG_INITRAMFS_COMPRESSION_NONE=y CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=y CONFIG_ANON_INODES=y @@ -80,6 +81,7 @@ CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y # CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y @@ -106,6 +108,8 @@ CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_HAVE_CLK=y +CONFIG_HAVE_DMA_API_DEBUG=y +# CONFIG_SLOW_WORK is not set CONFIG_HAVE_GENERIC_DMA_COHERENT=y CONFIG_RT_MUTEXES=y CONFIG_BASE_SMALL=0 @@ -116,7 +120,6 @@ CONFIG_MODULES=y # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -163,6 +166,7 @@ CONFIG_CPU_SUBTYPE_SH7203=y # CONFIG_CPU_SUBTYPE_SH7760 is not set # CONFIG_CPU_SUBTYPE_SH4_202 is not set # CONFIG_CPU_SUBTYPE_SH7723 is not set +# CONFIG_CPU_SUBTYPE_SH7724 is not set # CONFIG_CPU_SUBTYPE_SH7763 is not set # CONFIG_CPU_SUBTYPE_SH7770 is not set # CONFIG_CPU_SUBTYPE_SH7780 is not set @@ -172,8 +176,6 @@ CONFIG_CPU_SUBTYPE_SH7203=y # CONFIG_CPU_SUBTYPE_SH7343 is not set # CONFIG_CPU_SUBTYPE_SH7722 is not set # CONFIG_CPU_SUBTYPE_SH7366 is not set -# CONFIG_CPU_SUBTYPE_SH5_101 is not set -# CONFIG_CPU_SUBTYPE_SH5_103 is not set # # Memory management options @@ -750,15 +752,17 @@ CONFIG_USB_HID=y # # Special HID drivers # -CONFIG_HID_COMPAT=y CONFIG_HID_A4TECH=y CONFIG_HID_APPLE=y CONFIG_HID_BELKIN=y CONFIG_HID_CHERRY=y CONFIG_HID_CHICONY=y CONFIG_HID_CYPRESS=y +# CONFIG_DRAGONRISE_FF is not set CONFIG_HID_EZKEY=y +# CONFIG_HID_KYE is not set CONFIG_HID_GYRATION=y +# CONFIG_HID_KENSINGTON is not set CONFIG_HID_LOGITECH=y # CONFIG_LOGITECH_FF is not set # CONFIG_LOGIRUMBLEPAD2_FF is not set @@ -874,6 +878,7 @@ CONFIG_LEDS_CLASS=y # LED drivers # CONFIG_LEDS_GPIO=y +CONFIG_LEDS_GPIO_PLATFORM=y # # LED Triggers @@ -882,6 +887,7 @@ CONFIG_LEDS_TRIGGERS=y CONFIG_LEDS_TRIGGER_TIMER=y CONFIG_LEDS_TRIGGER_HEARTBEAT=y CONFIG_LEDS_TRIGGER_BACKLIGHT=y +# CONFIG_LEDS_TRIGGER_GPIO is not set CONFIG_LEDS_TRIGGER_DEFAULT_ON=y # @@ -951,6 +957,11 @@ CONFIG_FILE_LOCKING=y # CONFIG_FUSE_FS is not set # +# Caches +# +# CONFIG_FSCACHE is not set + +# # CD-ROM/DVD Filesystems # # CONFIG_ISO9660_FS is not set @@ -989,8 +1000,13 @@ CONFIG_MISC_FILESYSTEMS=y # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set CONFIG_ROMFS_FS=y +CONFIG_ROMFS_BACKED_BY_BLOCK=y +# CONFIG_ROMFS_BACKED_BY_MTD is not set +# CONFIG_ROMFS_BACKED_BY_BOTH is not set +CONFIG_ROMFS_ON_BLOCK=y # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y # CONFIG_NFS_V3 is not set @@ -1033,6 +1049,9 @@ CONFIG_DEBUG_SHIRQ=y CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set @@ -1076,6 +1095,7 @@ CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_RING_BUFFER=y CONFIG_TRACING=y +CONFIG_TRACING_SUPPORT=y # # Tracers @@ -1083,11 +1103,16 @@ CONFIG_TRACING=y # CONFIG_FUNCTION_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set # CONFIG_BOOT_TRACER is not set # CONFIG_TRACE_BRANCH_PROFILING is not set # CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_FTRACE_STARTUP_TEST is not set # CONFIG_DYNAMIC_DEBUG is not set +# CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set @@ -1111,6 +1136,7 @@ CONFIG_DUMP_CODE=y # CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set # CONFIG_CRYPTO is not set +CONFIG_BINARY_PRINTF=y # # Library routines diff --git a/arch/sh/configs/rts7751r2d1_defconfig b/arch/sh/configs/rts7751r2d1_defconfig index c0f741a..a4a59f6 100644 --- a/arch/sh/configs/rts7751r2d1_defconfig +++ b/arch/sh/configs/rts7751r2d1_defconfig @@ -1,10 +1,11 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29 -# Thu Apr 2 18:33:25 2009 +# Linux kernel version: 2.6.30-rc3 +# Mon Apr 27 12:58:13 2009 # CONFIG_SUPERH=y CONFIG_SUPERH32=y +# CONFIG_SUPERH64 is not set CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig" CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_GENERIC_BUG=y @@ -70,6 +71,7 @@ CONFIG_UID16=y # CONFIG_SYSCTL_SYSCALL is not set CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y @@ -99,6 +101,8 @@ CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_HAVE_CLK=y +CONFIG_HAVE_DMA_API_DEBUG=y +# CONFIG_SLOW_WORK is not set CONFIG_HAVE_GENERIC_DMA_COHERENT=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -110,7 +114,6 @@ CONFIG_MODULES=y # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -156,6 +159,7 @@ CONFIG_CPU_SUBTYPE_SH7751R=y # CONFIG_CPU_SUBTYPE_SH7760 is not set # CONFIG_CPU_SUBTYPE_SH4_202 is not set # CONFIG_CPU_SUBTYPE_SH7723 is not set +# CONFIG_CPU_SUBTYPE_SH7724 is not set # CONFIG_CPU_SUBTYPE_SH7763 is not set # CONFIG_CPU_SUBTYPE_SH7770 is not set # CONFIG_CPU_SUBTYPE_SH7780 is not set @@ -165,8 +169,6 @@ CONFIG_CPU_SUBTYPE_SH7751R=y # CONFIG_CPU_SUBTYPE_SH7343 is not set # CONFIG_CPU_SUBTYPE_SH7722 is not set # CONFIG_CPU_SUBTYPE_SH7366 is not set -# CONFIG_CPU_SUBTYPE_SH5_101 is not set -# CONFIG_CPU_SUBTYPE_SH5_103 is not set # # Memory management options @@ -302,8 +304,6 @@ CONFIG_CMDLINE="console=tty0 console=ttySC0,115200 root=/dev/sda1 earlyprintk=se # CONFIG_PCI=y CONFIG_SH_PCIDMA_NONCOHERENT=y -CONFIG_PCI_AUTO=y -CONFIG_PCI_AUTO_UPDATE_RESOURCES=y # CONFIG_PCIEPORTBUS is not set # CONFIG_ARCH_SUPPORTS_MSI is not set CONFIG_PCI_LEGACY=y @@ -513,6 +513,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_MPT2SAS is not set # CONFIG_SCSI_HPTIOP is not set # CONFIG_LIBFC is not set +# CONFIG_LIBFCOE is not set # CONFIG_FCOE is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set @@ -672,6 +673,7 @@ CONFIG_NETDEV_1000=y # CONFIG_E1000E is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set +# CONFIG_IGBVF is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -695,6 +697,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set +# CONFIG_VXGE is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set # CONFIG_NIU is not set @@ -793,6 +796,7 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=4 # # Non-8250 serial port support # +# CONFIG_SERIAL_MAX3100 is not set CONFIG_SERIAL_SH_SCI=y CONFIG_SERIAL_SH_SCI_NR_UARTS=1 CONFIG_SERIAL_SH_SCI_CONSOLE=y @@ -1079,15 +1083,17 @@ CONFIG_USB_HID=y # # Special HID drivers # -CONFIG_HID_COMPAT=y CONFIG_HID_A4TECH=y CONFIG_HID_APPLE=y CONFIG_HID_BELKIN=y CONFIG_HID_CHERRY=y CONFIG_HID_CHICONY=y CONFIG_HID_CYPRESS=y +# CONFIG_DRAGONRISE_FF is not set CONFIG_HID_EZKEY=y +# CONFIG_HID_KYE is not set CONFIG_HID_GYRATION=y +# CONFIG_HID_KENSINGTON is not set CONFIG_HID_LOGITECH=y # CONFIG_LOGITECH_FF is not set # CONFIG_LOGIRUMBLEPAD2_FF is not set @@ -1291,6 +1297,11 @@ CONFIG_INOTIFY_USER=y # CONFIG_FUSE_FS is not set # +# Caches +# +# CONFIG_FSCACHE is not set + +# # CD-ROM/DVD Filesystems # # CONFIG_ISO9660_FS is not set @@ -1337,6 +1348,7 @@ CONFIG_MINIX_FS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y # CONFIG_NFS_FS is not set # CONFIG_NFSD is not set @@ -1417,11 +1429,25 @@ CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_RING_BUFFER=y CONFIG_TRACING=y +CONFIG_TRACING_SUPPORT=y # # Tracers # +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_FTRACE_STARTUP_TEST is not set # CONFIG_DYNAMIC_DEBUG is not set +# CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_SH_STANDARD_BIOS is not set @@ -1524,6 +1550,7 @@ CONFIG_CRYPTO=y # CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set +CONFIG_BINARY_PRINTF=y # # Library routines diff --git a/arch/sh/configs/rts7751r2dplus_defconfig b/arch/sh/configs/rts7751r2dplus_defconfig index 8feef62..2bc1c97 100644 --- a/arch/sh/configs/rts7751r2dplus_defconfig +++ b/arch/sh/configs/rts7751r2dplus_defconfig @@ -1,10 +1,11 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29 -# Thu Apr 2 18:34:12 2009 +# Linux kernel version: 2.6.30-rc3 +# Mon Apr 27 12:59:01 2009 # CONFIG_SUPERH=y CONFIG_SUPERH32=y +# CONFIG_SUPERH64 is not set CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig" CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_GENERIC_BUG=y @@ -70,6 +71,7 @@ CONFIG_UID16=y # CONFIG_SYSCTL_SYSCALL is not set CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y @@ -99,6 +101,8 @@ CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_HAVE_CLK=y +CONFIG_HAVE_DMA_API_DEBUG=y +# CONFIG_SLOW_WORK is not set CONFIG_HAVE_GENERIC_DMA_COHERENT=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -110,7 +114,6 @@ CONFIG_MODULES=y # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -156,6 +159,7 @@ CONFIG_CPU_SUBTYPE_SH7751R=y # CONFIG_CPU_SUBTYPE_SH7760 is not set # CONFIG_CPU_SUBTYPE_SH4_202 is not set # CONFIG_CPU_SUBTYPE_SH7723 is not set +# CONFIG_CPU_SUBTYPE_SH7724 is not set # CONFIG_CPU_SUBTYPE_SH7763 is not set # CONFIG_CPU_SUBTYPE_SH7770 is not set # CONFIG_CPU_SUBTYPE_SH7780 is not set @@ -165,8 +169,6 @@ CONFIG_CPU_SUBTYPE_SH7751R=y # CONFIG_CPU_SUBTYPE_SH7343 is not set # CONFIG_CPU_SUBTYPE_SH7722 is not set # CONFIG_CPU_SUBTYPE_SH7366 is not set -# CONFIG_CPU_SUBTYPE_SH5_101 is not set -# CONFIG_CPU_SUBTYPE_SH5_103 is not set # # Memory management options @@ -302,8 +304,6 @@ CONFIG_CMDLINE="console=tty0 console=ttySC0,115200 root=/dev/sda1 earlyprintk=se # CONFIG_PCI=y CONFIG_SH_PCIDMA_NONCOHERENT=y -CONFIG_PCI_AUTO=y -CONFIG_PCI_AUTO_UPDATE_RESOURCES=y # CONFIG_PCIEPORTBUS is not set # CONFIG_ARCH_SUPPORTS_MSI is not set CONFIG_PCI_LEGACY=y @@ -513,6 +513,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_MPT2SAS is not set # CONFIG_SCSI_HPTIOP is not set # CONFIG_LIBFC is not set +# CONFIG_LIBFCOE is not set # CONFIG_FCOE is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set @@ -672,6 +673,7 @@ CONFIG_NETDEV_1000=y # CONFIG_E1000E is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set +# CONFIG_IGBVF is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -695,6 +697,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set +# CONFIG_VXGE is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set # CONFIG_NIU is not set @@ -793,6 +796,7 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=4 # # Non-8250 serial port support # +# CONFIG_SERIAL_MAX3100 is not set CONFIG_SERIAL_SH_SCI=y CONFIG_SERIAL_SH_SCI_NR_UARTS=1 CONFIG_SERIAL_SH_SCI_CONSOLE=y @@ -1079,15 +1083,17 @@ CONFIG_USB_HID=y # # Special HID drivers # -CONFIG_HID_COMPAT=y CONFIG_HID_A4TECH=y CONFIG_HID_APPLE=y CONFIG_HID_BELKIN=y CONFIG_HID_CHERRY=y CONFIG_HID_CHICONY=y CONFIG_HID_CYPRESS=y +# CONFIG_DRAGONRISE_FF is not set CONFIG_HID_EZKEY=y +# CONFIG_HID_KYE is not set CONFIG_HID_GYRATION=y +# CONFIG_HID_KENSINGTON is not set CONFIG_HID_LOGITECH=y # CONFIG_LOGITECH_FF is not set # CONFIG_LOGIRUMBLEPAD2_FF is not set @@ -1291,6 +1297,11 @@ CONFIG_INOTIFY_USER=y # CONFIG_FUSE_FS is not set # +# Caches +# +# CONFIG_FSCACHE is not set + +# # CD-ROM/DVD Filesystems # # CONFIG_ISO9660_FS is not set @@ -1337,6 +1348,7 @@ CONFIG_MINIX_FS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y # CONFIG_NFS_FS is not set # CONFIG_NFSD is not set @@ -1417,11 +1429,25 @@ CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_RING_BUFFER=y CONFIG_TRACING=y +CONFIG_TRACING_SUPPORT=y # # Tracers # +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_FTRACE_STARTUP_TEST is not set # CONFIG_DYNAMIC_DEBUG is not set +# CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_SH_STANDARD_BIOS is not set @@ -1524,6 +1550,7 @@ CONFIG_CRYPTO=y # CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set +CONFIG_BINARY_PRINTF=y # # Library routines diff --git a/arch/sh/configs/sdk7780_defconfig b/arch/sh/configs/sdk7780_defconfig index 739e229..a629b79 100644 --- a/arch/sh/configs/sdk7780_defconfig +++ b/arch/sh/configs/sdk7780_defconfig @@ -1,10 +1,11 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29 -# Thu Apr 2 18:34:43 2009 +# Linux kernel version: 2.6.30-rc3 +# Mon Apr 27 12:59:32 2009 # CONFIG_SUPERH=y CONFIG_SUPERH32=y +# CONFIG_SUPERH64 is not set CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig" CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_GENERIC_BUG=y @@ -41,6 +42,7 @@ CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y +CONFIG_POSIX_MQUEUE_SYSCTL=y CONFIG_BSD_PROCESS_ACCT=y # CONFIG_BSD_PROCESS_ACCT_V3 is not set # CONFIG_TASKSTATS is not set @@ -73,6 +75,7 @@ CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y # CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y @@ -93,6 +96,7 @@ CONFIG_COMPAT_BRK=y CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_IOREMAP_PROT=y @@ -100,6 +104,8 @@ CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_HAVE_CLK=y +CONFIG_HAVE_DMA_API_DEBUG=y +# CONFIG_SLOW_WORK is not set CONFIG_HAVE_GENERIC_DMA_COHERENT=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -112,7 +118,6 @@ CONFIG_MODULE_FORCE_UNLOAD=y # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y CONFIG_LBD=y -# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -159,6 +164,7 @@ CONFIG_CPU_SH4A=y # CONFIG_CPU_SUBTYPE_SH7760 is not set # CONFIG_CPU_SUBTYPE_SH4_202 is not set # CONFIG_CPU_SUBTYPE_SH7723 is not set +# CONFIG_CPU_SUBTYPE_SH7724 is not set # CONFIG_CPU_SUBTYPE_SH7763 is not set # CONFIG_CPU_SUBTYPE_SH7770 is not set CONFIG_CPU_SUBTYPE_SH7780=y @@ -168,8 +174,6 @@ CONFIG_CPU_SUBTYPE_SH7780=y # CONFIG_CPU_SUBTYPE_SH7343 is not set # CONFIG_CPU_SUBTYPE_SH7722 is not set # CONFIG_CPU_SUBTYPE_SH7366 is not set -# CONFIG_CPU_SUBTYPE_SH5_101 is not set -# CONFIG_CPU_SUBTYPE_SH5_103 is not set # # Memory management options @@ -310,8 +314,6 @@ CONFIG_CMDLINE="mem=128M console=tty0 console=ttySC0,115200 ip=bootp root=/dev/n # CONFIG_PCI=y CONFIG_SH_PCIDMA_NONCOHERENT=y -CONFIG_PCI_AUTO=y -CONFIG_PCI_AUTO_UPDATE_RESOURCES=y # CONFIG_PCIEPORTBUS is not set # CONFIG_ARCH_SUPPORTS_MSI is not set # CONFIG_PCI_LEGACY is not set @@ -646,6 +648,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_MPT2SAS is not set # CONFIG_SCSI_HPTIOP is not set # CONFIG_LIBFC is not set +# CONFIG_LIBFCOE is not set # CONFIG_FCOE is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set @@ -1091,15 +1094,17 @@ CONFIG_USB_HID=y # # Special HID drivers # -CONFIG_HID_COMPAT=y CONFIG_HID_A4TECH=y CONFIG_HID_APPLE=y CONFIG_HID_BELKIN=y CONFIG_HID_CHERRY=y CONFIG_HID_CHICONY=y CONFIG_HID_CYPRESS=y +# CONFIG_DRAGONRISE_FF is not set CONFIG_HID_EZKEY=y +# CONFIG_HID_KYE is not set CONFIG_HID_GYRATION=y +# CONFIG_HID_KENSINGTON is not set CONFIG_HID_LOGITECH=y # CONFIG_LOGITECH_FF is not set # CONFIG_LOGIRUMBLEPAD2_FF is not set @@ -1257,6 +1262,7 @@ CONFIG_EXT2_FS_POSIX_ACL=y # CONFIG_EXT2_FS_SECURITY is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set CONFIG_EXT3_FS_XATTR=y CONFIG_EXT3_FS_POSIX_ACL=y # CONFIG_EXT3_FS_SECURITY is not set @@ -1281,6 +1287,11 @@ CONFIG_AUTOFS4_FS=y CONFIG_GENERIC_ACL=y # +# Caches +# +# CONFIG_FSCACHE is not set + +# # CD-ROM/DVD Filesystems # CONFIG_ISO9660_FS=y @@ -1331,6 +1342,7 @@ CONFIG_MINIX_FS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -1418,6 +1430,9 @@ CONFIG_DEBUG_KERNEL=y CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 # CONFIG_SCHED_DEBUG is not set # CONFIG_SCHEDSTATS is not set CONFIG_TIMER_STATS=y @@ -1455,6 +1470,7 @@ CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_TRACING_SUPPORT=y # # Tracers @@ -1464,9 +1480,14 @@ CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y # CONFIG_PREEMPT_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set # CONFIG_BOOT_TRACER is not set # CONFIG_TRACE_BRANCH_PROFILING is not set # CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set @@ -1580,6 +1601,7 @@ CONFIG_CRYPTO_DES=y # CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines diff --git a/arch/sh/configs/se7206_defconfig b/arch/sh/configs/se7206_defconfig index d30e0a7..5caf85a 100644 --- a/arch/sh/configs/se7206_defconfig +++ b/arch/sh/configs/se7206_defconfig @@ -1,10 +1,11 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29 -# Thu Apr 2 18:39:37 2009 +# Linux kernel version: 2.6.30-rc3 +# Mon Apr 27 13:01:02 2009 # CONFIG_SUPERH=y CONFIG_SUPERH32=y +# CONFIG_SUPERH64 is not set CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig" CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_GENERIC_BUG=y @@ -40,6 +41,7 @@ CONFIG_LOCALVERSION_AUTO=y CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y +CONFIG_POSIX_MQUEUE_SYSCTL=y CONFIG_BSD_PROCESS_ACCT=y # CONFIG_BSD_PROCESS_ACCT_V3 is not set # CONFIG_TASKSTATS is not set @@ -63,6 +65,7 @@ CONFIG_CGROUP_DEBUG=y CONFIG_CGROUP_NS=y # CONFIG_CGROUP_FREEZER is not set CONFIG_CGROUP_DEVICE=y +# CONFIG_CPUSETS is not set CONFIG_CGROUP_CPUACCT=y CONFIG_RESOURCE_COUNTERS=y CONFIG_CGROUP_MEM_RES_CTLR=y @@ -80,7 +83,6 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_RD_GZIP=y # CONFIG_RD_BZIP2 is not set # CONFIG_RD_LZMA is not set -CONFIG_INITRAMFS_COMPRESSION_NONE=y CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=y CONFIG_ANON_INODES=y @@ -90,6 +92,7 @@ CONFIG_EMBEDDED=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y # CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y @@ -116,6 +119,8 @@ CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_HAVE_CLK=y +CONFIG_HAVE_DMA_API_DEBUG=y +# CONFIG_SLOW_WORK is not set CONFIG_HAVE_GENERIC_DMA_COHERENT=y CONFIG_RT_MUTEXES=y CONFIG_BASE_SMALL=0 @@ -127,7 +132,6 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -174,6 +178,7 @@ CONFIG_CPU_SUBTYPE_SH7206=y # CONFIG_CPU_SUBTYPE_SH7760 is not set # CONFIG_CPU_SUBTYPE_SH4_202 is not set # CONFIG_CPU_SUBTYPE_SH7723 is not set +# CONFIG_CPU_SUBTYPE_SH7724 is not set # CONFIG_CPU_SUBTYPE_SH7763 is not set # CONFIG_CPU_SUBTYPE_SH7770 is not set # CONFIG_CPU_SUBTYPE_SH7780 is not set @@ -183,8 +188,6 @@ CONFIG_CPU_SUBTYPE_SH7206=y # CONFIG_CPU_SUBTYPE_SH7343 is not set # CONFIG_CPU_SUBTYPE_SH7722 is not set # CONFIG_CPU_SUBTYPE_SH7366 is not set -# CONFIG_CPU_SUBTYPE_SH5_101 is not set -# CONFIG_CPU_SUBTYPE_SH5_103 is not set # # Memory management options @@ -746,6 +749,11 @@ CONFIG_FILE_LOCKING=y # CONFIG_FUSE_FS is not set # +# Caches +# +# CONFIG_FSCACHE is not set + +# # CD-ROM/DVD Filesystems # # CONFIG_ISO9660_FS is not set @@ -785,8 +793,13 @@ CONFIG_CRAMFS=y # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set CONFIG_ROMFS_FS=y +CONFIG_ROMFS_BACKED_BY_BLOCK=y +# CONFIG_ROMFS_BACKED_BY_MTD is not set +# CONFIG_ROMFS_BACKED_BY_BOTH is not set +CONFIG_ROMFS_ON_BLOCK=y # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -831,6 +844,9 @@ CONFIG_DEBUG_KERNEL=y CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set @@ -869,6 +885,7 @@ CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_RING_BUFFER=y CONFIG_TRACING=y +CONFIG_TRACING_SUPPORT=y # # Tracers @@ -876,11 +893,16 @@ CONFIG_TRACING=y # CONFIG_FUNCTION_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set # CONFIG_BOOT_TRACER is not set # CONFIG_TRACE_BRANCH_PROFILING is not set # CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_FTRACE_STARTUP_TEST is not set # CONFIG_DYNAMIC_DEBUG is not set +# CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set @@ -991,6 +1013,7 @@ CONFIG_CRYPTO_LZO=y # # CONFIG_CRYPTO_ANSI_CPRNG is not set # CONFIG_CRYPTO_HW is not set +CONFIG_BINARY_PRINTF=y # # Library routines diff --git a/arch/sh/configs/se7343_defconfig b/arch/sh/configs/se7343_defconfig index fbb72d0..004d531 100644 --- a/arch/sh/configs/se7343_defconfig +++ b/arch/sh/configs/se7343_defconfig @@ -1,10 +1,11 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29 -# Thu Apr 2 18:42:00 2009 +# Linux kernel version: 2.6.30-rc3 +# Mon Apr 27 13:01:44 2009 # CONFIG_SUPERH=y CONFIG_SUPERH32=y +# CONFIG_SUPERH64 is not set CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig" CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_GENERIC_BUG=y @@ -40,6 +41,7 @@ CONFIG_LOCALVERSION_AUTO=y CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y +CONFIG_POSIX_MQUEUE_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set @@ -73,6 +75,7 @@ CONFIG_UID16=y # CONFIG_SYSCTL_SYSCALL is not set CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y @@ -91,6 +94,7 @@ CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set # CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_IOREMAP_PROT=y @@ -98,6 +102,8 @@ CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_HAVE_CLK=y +CONFIG_HAVE_DMA_API_DEBUG=y +# CONFIG_SLOW_WORK is not set CONFIG_HAVE_GENERIC_DMA_COHERENT=y CONFIG_SLABINFO=y CONFIG_BASE_SMALL=0 @@ -109,7 +115,6 @@ CONFIG_MODULE_FORCE_UNLOAD=y # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -158,6 +163,7 @@ CONFIG_ARCH_SHMOBILE=y # CONFIG_CPU_SUBTYPE_SH7760 is not set # CONFIG_CPU_SUBTYPE_SH4_202 is not set # CONFIG_CPU_SUBTYPE_SH7723 is not set +# CONFIG_CPU_SUBTYPE_SH7724 is not set # CONFIG_CPU_SUBTYPE_SH7763 is not set # CONFIG_CPU_SUBTYPE_SH7770 is not set # CONFIG_CPU_SUBTYPE_SH7780 is not set @@ -167,8 +173,6 @@ CONFIG_ARCH_SHMOBILE=y CONFIG_CPU_SUBTYPE_SH7343=y # CONFIG_CPU_SUBTYPE_SH7722 is not set # CONFIG_CPU_SUBTYPE_SH7366 is not set -# CONFIG_CPU_SUBTYPE_SH5_101 is not set -# CONFIG_CPU_SUBTYPE_SH5_103 is not set # # Memory management options @@ -769,6 +773,7 @@ CONFIG_VIDEO_HELPER_CHIPS_AUTO=y # CONFIG_SOC_CAMERA is not set CONFIG_V4L_USB_DRIVERS=y # CONFIG_USB_VIDEO_CLASS is not set +CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y CONFIG_USB_GSPCA=m # CONFIG_USB_M5602 is not set # CONFIG_USB_STV06XX is not set @@ -800,6 +805,7 @@ CONFIG_USB_GSPCA=m # CONFIG_VIDEO_PVRUSB2 is not set # CONFIG_VIDEO_HDPVR is not set # CONFIG_VIDEO_EM28XX is not set +# CONFIG_VIDEO_CX231XX is not set # CONFIG_VIDEO_USBVISION is not set # CONFIG_USB_VICAM is not set # CONFIG_USB_IBMCAM is not set @@ -813,6 +819,7 @@ CONFIG_USB_GSPCA=m # CONFIG_USB_STV680 is not set # CONFIG_USB_ZC0301 is not set # CONFIG_USB_PWC is not set +CONFIG_USB_PWC_INPUT_EVDEV=y # CONFIG_USB_ZR364XX is not set # CONFIG_USB_STKWEBCAM is not set # CONFIG_USB_S2255 is not set @@ -914,15 +921,17 @@ CONFIG_USB_HID=y # # Special HID drivers # -CONFIG_HID_COMPAT=y CONFIG_HID_A4TECH=y CONFIG_HID_APPLE=y CONFIG_HID_BELKIN=y CONFIG_HID_CHERRY=y CONFIG_HID_CHICONY=y CONFIG_HID_CYPRESS=y +# CONFIG_DRAGONRISE_FF is not set CONFIG_HID_EZKEY=y +# CONFIG_HID_KYE is not set CONFIG_HID_GYRATION=y +# CONFIG_HID_KENSINGTON is not set CONFIG_HID_LOGITECH=y # CONFIG_LOGITECH_FF is not set # CONFIG_LOGIRUMBLEPAD2_FF is not set @@ -1050,6 +1059,7 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set @@ -1071,6 +1081,11 @@ CONFIG_FILE_LOCKING=y # CONFIG_FUSE_FS is not set # +# Caches +# +# CONFIG_FSCACHE is not set + +# # CD-ROM/DVD Filesystems # # CONFIG_ISO9660_FS is not set @@ -1125,6 +1140,7 @@ CONFIG_CRAMFS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -1174,10 +1190,23 @@ CONFIG_FRAME_WARN=1024 CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_TRACING_SUPPORT=y # # Tracers # +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_SH_STANDARD_BIOS is not set @@ -1279,6 +1308,7 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y +# CONFIG_BINARY_PRINTF is not set # # Library routines diff --git a/arch/sh/configs/se7619_defconfig b/arch/sh/configs/se7619_defconfig index 125304e..edbece5 100644 --- a/arch/sh/configs/se7619_defconfig +++ b/arch/sh/configs/se7619_defconfig @@ -1,10 +1,11 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29 -# Thu Apr 2 18:44:53 2009 +# Linux kernel version: 2.6.30-rc3 +# Mon Apr 27 13:02:32 2009 # CONFIG_SUPERH=y CONFIG_SUPERH32=y +# CONFIG_SUPERH64 is not set CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig" CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_GENERIC_BUG=y @@ -61,6 +62,7 @@ CONFIG_EMBEDDED=y # CONFIG_UID16 is not set # CONFIG_SYSCTL_SYSCALL is not set # CONFIG_KALLSYMS is not set +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_HOTPLUG is not set CONFIG_PRINTK=y CONFIG_BUG=y @@ -78,11 +80,14 @@ CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set # CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_HAVE_CLK=y +CONFIG_HAVE_DMA_API_DEBUG=y +# CONFIG_SLOW_WORK is not set CONFIG_HAVE_GENERIC_DMA_COHERENT=y CONFIG_SLABINFO=y CONFIG_BASE_SMALL=1 @@ -134,6 +139,7 @@ CONFIG_CPU_SUBTYPE_SH7619=y # CONFIG_CPU_SUBTYPE_SH7760 is not set # CONFIG_CPU_SUBTYPE_SH4_202 is not set # CONFIG_CPU_SUBTYPE_SH7723 is not set +# CONFIG_CPU_SUBTYPE_SH7724 is not set # CONFIG_CPU_SUBTYPE_SH7763 is not set # CONFIG_CPU_SUBTYPE_SH7770 is not set # CONFIG_CPU_SUBTYPE_SH7780 is not set @@ -143,8 +149,6 @@ CONFIG_CPU_SUBTYPE_SH7619=y # CONFIG_CPU_SUBTYPE_SH7343 is not set # CONFIG_CPU_SUBTYPE_SH7722 is not set # CONFIG_CPU_SUBTYPE_SH7366 is not set -# CONFIG_CPU_SUBTYPE_SH5_101 is not set -# CONFIG_CPU_SUBTYPE_SH5_103 is not set # # Memory management options @@ -513,7 +517,6 @@ CONFIG_HID=y # # Special HID drivers # -CONFIG_HID_COMPAT=y CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y # CONFIG_USB_ARCH_HAS_OHCI is not set @@ -564,6 +567,11 @@ CONFIG_FILE_LOCKING=y # CONFIG_FUSE_FS is not set # +# Caches +# +# CONFIG_FSCACHE is not set + +# # CD-ROM/DVD Filesystems # # CONFIG_ISO9660_FS is not set @@ -601,8 +609,13 @@ CONFIG_MISC_FILESYSTEMS=y # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set CONFIG_ROMFS_FS=y +CONFIG_ROMFS_BACKED_BY_BLOCK=y +# CONFIG_ROMFS_BACKED_BY_MTD is not set +# CONFIG_ROMFS_BACKED_BY_BOTH is not set +CONFIG_ROMFS_ON_BLOCK=y # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set # # Partition Types @@ -630,10 +643,21 @@ CONFIG_FRAME_WARN=1024 CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_TRACING_SUPPORT=y # # Tracers # +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_SH_STANDARD_BIOS is not set @@ -647,6 +671,7 @@ CONFIG_HAVE_ARCH_KGDB=y # CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set # CONFIG_CRYPTO is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines diff --git a/arch/sh/configs/se7705_defconfig b/arch/sh/configs/se7705_defconfig index 0308abf..bae161c 100644 --- a/arch/sh/configs/se7705_defconfig +++ b/arch/sh/configs/se7705_defconfig @@ -1,10 +1,11 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29 -# Thu Apr 2 18:45:56 2009 +# Linux kernel version: 2.6.30-rc3 +# Mon Apr 27 13:02:52 2009 # CONFIG_SUPERH=y CONFIG_SUPERH32=y +# CONFIG_SUPERH64 is not set CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig" CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_GENERIC_BUG=y @@ -62,7 +63,6 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_RD_GZIP=y # CONFIG_RD_BZIP2 is not set # CONFIG_RD_LZMA is not set -CONFIG_INITRAMFS_COMPRESSION_NONE=y # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y CONFIG_ANON_INODES=y @@ -70,6 +70,7 @@ CONFIG_EMBEDDED=y CONFIG_UID16=y # CONFIG_SYSCTL_SYSCALL is not set # CONFIG_KALLSYMS is not set +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_HOTPLUG is not set CONFIG_PRINTK=y CONFIG_BUG=y @@ -88,12 +89,15 @@ CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set # CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_HAVE_CLK=y +CONFIG_HAVE_DMA_API_DEBUG=y +# CONFIG_SLOW_WORK is not set CONFIG_HAVE_GENERIC_DMA_COHERENT=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -150,6 +154,7 @@ CONFIG_CPU_SUBTYPE_SH7705=y # CONFIG_CPU_SUBTYPE_SH7760 is not set # CONFIG_CPU_SUBTYPE_SH4_202 is not set # CONFIG_CPU_SUBTYPE_SH7723 is not set +# CONFIG_CPU_SUBTYPE_SH7724 is not set # CONFIG_CPU_SUBTYPE_SH7763 is not set # CONFIG_CPU_SUBTYPE_SH7770 is not set # CONFIG_CPU_SUBTYPE_SH7780 is not set @@ -159,8 +164,6 @@ CONFIG_CPU_SUBTYPE_SH7705=y # CONFIG_CPU_SUBTYPE_SH7343 is not set # CONFIG_CPU_SUBTYPE_SH7722 is not set # CONFIG_CPU_SUBTYPE_SH7366 is not set -# CONFIG_CPU_SUBTYPE_SH5_101 is not set -# CONFIG_CPU_SUBTYPE_SH5_103 is not set # # Memory management options @@ -698,7 +701,6 @@ CONFIG_HID=y # # Special HID drivers # -CONFIG_HID_COMPAT=y CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y # CONFIG_USB_ARCH_HAS_OHCI is not set @@ -752,6 +754,11 @@ CONFIG_INOTIFY_USER=y # CONFIG_FUSE_FS is not set # +# Caches +# +# CONFIG_FSCACHE is not set + +# # CD-ROM/DVD Filesystems # # CONFIG_ISO9660_FS is not set @@ -804,6 +811,7 @@ CONFIG_JFFS2_RTIME=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y # CONFIG_NFS_V3 is not set @@ -847,10 +855,23 @@ CONFIG_FRAME_WARN=1024 CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_TRACING_SUPPORT=y # # Tracers # +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set +# CONFIG_PREEMPT_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_SH_STANDARD_BIOS is not set @@ -949,6 +970,7 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y +# CONFIG_BINARY_PRINTF is not set # # Library routines diff --git a/arch/sh/configs/se7712_defconfig b/arch/sh/configs/se7712_defconfig index a8c24b7..330043f 100644 --- a/arch/sh/configs/se7712_defconfig +++ b/arch/sh/configs/se7712_defconfig @@ -1,10 +1,11 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29 -# Thu Apr 2 18:48:18 2009 +# Linux kernel version: 2.6.30-rc3 +# Mon Apr 27 13:03:27 2009 # CONFIG_SUPERH=y CONFIG_SUPERH32=y +# CONFIG_SUPERH64 is not set CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig" CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_GENERIC_FIND_NEXT_BIT=y @@ -38,6 +39,7 @@ CONFIG_LOCALVERSION="" CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y +CONFIG_POSIX_MQUEUE_SYSCTL=y CONFIG_BSD_PROCESS_ACCT=y # CONFIG_BSD_PROCESS_ACCT_V3 is not set # CONFIG_TASKSTATS is not set @@ -69,6 +71,7 @@ CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y # CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y # CONFIG_BUG is not set @@ -87,6 +90,7 @@ CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set # CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_IOREMAP_PROT=y @@ -94,6 +98,8 @@ CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_HAVE_CLK=y +CONFIG_HAVE_DMA_API_DEBUG=y +# CONFIG_SLOW_WORK is not set CONFIG_HAVE_GENERIC_DMA_COHERENT=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -105,7 +111,6 @@ CONFIG_MODULES=y # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -151,6 +156,7 @@ CONFIG_CPU_SUBTYPE_SH7712=y # CONFIG_CPU_SUBTYPE_SH7760 is not set # CONFIG_CPU_SUBTYPE_SH4_202 is not set # CONFIG_CPU_SUBTYPE_SH7723 is not set +# CONFIG_CPU_SUBTYPE_SH7724 is not set # CONFIG_CPU_SUBTYPE_SH7763 is not set # CONFIG_CPU_SUBTYPE_SH7770 is not set # CONFIG_CPU_SUBTYPE_SH7780 is not set @@ -160,8 +166,6 @@ CONFIG_CPU_SUBTYPE_SH7712=y # CONFIG_CPU_SUBTYPE_SH7343 is not set # CONFIG_CPU_SUBTYPE_SH7722 is not set # CONFIG_CPU_SUBTYPE_SH7366 is not set -# CONFIG_CPU_SUBTYPE_SH5_101 is not set -# CONFIG_CPU_SUBTYPE_SH5_103 is not set # # Memory management options @@ -585,6 +589,7 @@ CONFIG_SCSI_WAIT_SCAN=m CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set # CONFIG_LIBFC is not set +# CONFIG_LIBFCOE is not set # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_DH is not set # CONFIG_SCSI_OSD_INITIATOR is not set @@ -812,6 +817,7 @@ CONFIG_EXT2_FS_POSIX_ACL=y CONFIG_EXT2_FS_SECURITY=y # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set @@ -833,6 +839,11 @@ CONFIG_FILE_LOCKING=y # CONFIG_FUSE_FS is not set # +# Caches +# +# CONFIG_FSCACHE is not set + +# # CD-ROM/DVD Filesystems # # CONFIG_ISO9660_FS is not set @@ -887,6 +898,7 @@ CONFIG_CRAMFS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y # CONFIG_NFS_V3 is not set @@ -927,6 +939,7 @@ CONFIG_FRAME_WARN=1024 CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_SHIRQ is not set # CONFIG_DETECT_SOFTLOCKUP is not set +# CONFIG_DETECT_HUNG_TASK is not set CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set @@ -961,6 +974,7 @@ CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_TRACING_SUPPORT=y # # Tracers @@ -969,9 +983,14 @@ CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y # CONFIG_IRQSOFF_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set # CONFIG_BOOT_TRACER is not set # CONFIG_TRACE_BRANCH_PROFILING is not set # CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set @@ -1090,6 +1109,7 @@ CONFIG_CRYPTO_DEFLATE=y # # CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y +# CONFIG_BINARY_PRINTF is not set # # Library routines diff --git a/arch/sh/configs/se7721_defconfig b/arch/sh/configs/se7721_defconfig index 4b79c25..5647891 100644 --- a/arch/sh/configs/se7721_defconfig +++ b/arch/sh/configs/se7721_defconfig @@ -1,10 +1,11 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29 -# Thu Apr 2 18:51:44 2009 +# Linux kernel version: 2.6.30-rc3 +# Mon Apr 27 13:04:19 2009 # CONFIG_SUPERH=y CONFIG_SUPERH32=y +# CONFIG_SUPERH64 is not set CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig" CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_GENERIC_FIND_NEXT_BIT=y @@ -38,6 +39,7 @@ CONFIG_LOCALVERSION="" CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y +CONFIG_POSIX_MQUEUE_SYSCTL=y CONFIG_BSD_PROCESS_ACCT=y # CONFIG_BSD_PROCESS_ACCT_V3 is not set # CONFIG_TASKSTATS is not set @@ -73,6 +75,7 @@ CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y # CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y # CONFIG_BUG is not set @@ -91,6 +94,7 @@ CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set # CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_IOREMAP_PROT=y @@ -98,6 +102,8 @@ CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_HAVE_CLK=y +CONFIG_HAVE_DMA_API_DEBUG=y +# CONFIG_SLOW_WORK is not set CONFIG_HAVE_GENERIC_DMA_COHERENT=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -109,7 +115,6 @@ CONFIG_MODULES=y # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -155,6 +160,7 @@ CONFIG_CPU_SUBTYPE_SH7721=y # CONFIG_CPU_SUBTYPE_SH7760 is not set # CONFIG_CPU_SUBTYPE_SH4_202 is not set # CONFIG_CPU_SUBTYPE_SH7723 is not set +# CONFIG_CPU_SUBTYPE_SH7724 is not set # CONFIG_CPU_SUBTYPE_SH7763 is not set # CONFIG_CPU_SUBTYPE_SH7770 is not set # CONFIG_CPU_SUBTYPE_SH7780 is not set @@ -164,8 +170,6 @@ CONFIG_CPU_SUBTYPE_SH7721=y # CONFIG_CPU_SUBTYPE_SH7343 is not set # CONFIG_CPU_SUBTYPE_SH7722 is not set # CONFIG_CPU_SUBTYPE_SH7366 is not set -# CONFIG_CPU_SUBTYPE_SH5_101 is not set -# CONFIG_CPU_SUBTYPE_SH5_103 is not set # # Memory management options @@ -776,15 +780,17 @@ CONFIG_USB_HID=y # # Special HID drivers # -CONFIG_HID_COMPAT=y CONFIG_HID_A4TECH=y CONFIG_HID_APPLE=y CONFIG_HID_BELKIN=y CONFIG_HID_CHERRY=y CONFIG_HID_CHICONY=y CONFIG_HID_CYPRESS=y +# CONFIG_DRAGONRISE_FF is not set CONFIG_HID_EZKEY=y +# CONFIG_HID_KYE is not set CONFIG_HID_GYRATION=y +# CONFIG_HID_KENSINGTON is not set CONFIG_HID_LOGITECH=y # CONFIG_LOGITECH_FF is not set # CONFIG_LOGIRUMBLEPAD2_FF is not set @@ -943,6 +949,7 @@ CONFIG_EXT2_FS_POSIX_ACL=y CONFIG_EXT2_FS_SECURITY=y # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set @@ -964,6 +971,11 @@ CONFIG_FILE_LOCKING=y # CONFIG_FUSE_FS is not set # +# Caches +# +# CONFIG_FSCACHE is not set + +# # CD-ROM/DVD Filesystems # # CONFIG_ISO9660_FS is not set @@ -1021,6 +1033,7 @@ CONFIG_CRAMFS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set # CONFIG_NETWORK_FILESYSTEMS is not set # @@ -1085,6 +1098,7 @@ CONFIG_FRAME_WARN=1024 CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_SHIRQ is not set # CONFIG_DETECT_SOFTLOCKUP is not set +# CONFIG_DETECT_HUNG_TASK is not set CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set @@ -1119,6 +1133,7 @@ CONFIG_FRAME_POINTER=y CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_TRACING_SUPPORT=y # # Tracers @@ -1127,9 +1142,14 @@ CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y # CONFIG_IRQSOFF_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set # CONFIG_BOOT_TRACER is not set # CONFIG_TRACE_BRANCH_PROFILING is not set # CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set @@ -1248,6 +1268,7 @@ CONFIG_CRYPTO_DEFLATE=y # # CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y +# CONFIG_BINARY_PRINTF is not set # # Library routines diff --git a/arch/sh/configs/se7722_defconfig b/arch/sh/configs/se7722_defconfig index 82bdaac..726fdbd 100644 --- a/arch/sh/configs/se7722_defconfig +++ b/arch/sh/configs/se7722_defconfig @@ -1,10 +1,11 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29 -# Thu Apr 2 18:55:10 2009 +# Linux kernel version: 2.6.30-rc3 +# Mon Apr 27 13:05:29 2009 # CONFIG_SUPERH=y CONFIG_SUPERH32=y +# CONFIG_SUPERH64 is not set CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig" CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_GENERIC_BUG=y @@ -69,7 +70,6 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_RD_GZIP=y # CONFIG_RD_BZIP2 is not set # CONFIG_RD_LZMA is not set -CONFIG_INITRAMFS_COMPRESSION_NONE=y CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=y CONFIG_ANON_INODES=y @@ -78,6 +78,7 @@ CONFIG_UID16=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y @@ -97,6 +98,7 @@ CONFIG_COMPAT_BRK=y CONFIG_SLUB=y # CONFIG_SLOB is not set CONFIG_PROFILING=y +# CONFIG_MARKERS is not set # CONFIG_OPROFILE is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set @@ -105,6 +107,8 @@ CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_HAVE_CLK=y +CONFIG_HAVE_DMA_API_DEBUG=y +# CONFIG_SLOW_WORK is not set CONFIG_HAVE_GENERIC_DMA_COHERENT=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -117,7 +121,6 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -167,6 +170,7 @@ CONFIG_ARCH_SHMOBILE=y # CONFIG_CPU_SUBTYPE_SH7760 is not set # CONFIG_CPU_SUBTYPE_SH4_202 is not set # CONFIG_CPU_SUBTYPE_SH7723 is not set +# CONFIG_CPU_SUBTYPE_SH7724 is not set # CONFIG_CPU_SUBTYPE_SH7763 is not set # CONFIG_CPU_SUBTYPE_SH7770 is not set # CONFIG_CPU_SUBTYPE_SH7780 is not set @@ -176,8 +180,6 @@ CONFIG_ARCH_SHMOBILE=y # CONFIG_CPU_SUBTYPE_SH7343 is not set CONFIG_CPU_SUBTYPE_SH7722=y # CONFIG_CPU_SUBTYPE_SH7366 is not set -# CONFIG_CPU_SUBTYPE_SH5_101 is not set -# CONFIG_CPU_SUBTYPE_SH5_103 is not set # # Memory management options @@ -486,6 +488,7 @@ CONFIG_SCSI_WAIT_SCAN=m CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set # CONFIG_LIBFC is not set +# CONFIG_LIBFCOE is not set # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_DH is not set # CONFIG_SCSI_OSD_INITIATOR is not set @@ -692,7 +695,6 @@ CONFIG_HID=y # # Special HID drivers # -CONFIG_HID_COMPAT=y CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y # CONFIG_USB_ARCH_HAS_OHCI is not set @@ -766,6 +768,7 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set @@ -789,6 +792,11 @@ CONFIG_INOTIFY_USER=y # CONFIG_FUSE_FS is not set # +# Caches +# +# CONFIG_FSCACHE is not set + +# # CD-ROM/DVD Filesystems # # CONFIG_ISO9660_FS is not set @@ -832,6 +840,7 @@ CONFIG_MISC_FILESYSTEMS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y # CONFIG_NFS_FS is not set # CONFIG_NFSD is not set @@ -872,11 +881,25 @@ CONFIG_DEBUG_FS=y CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_TRACING_SUPPORT=y # # Tracers # +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set +# CONFIG_PREEMPT_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_DYNAMIC_DEBUG is not set +# CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y CONFIG_SH_STANDARD_BIOS=y @@ -977,6 +1000,7 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y +# CONFIG_BINARY_PRINTF is not set # # Library routines diff --git a/arch/sh/configs/se7750_defconfig b/arch/sh/configs/se7750_defconfig index ceef6d9..ed1a123 100644 --- a/arch/sh/configs/se7750_defconfig +++ b/arch/sh/configs/se7750_defconfig @@ -1,10 +1,11 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29 -# Thu Apr 2 18:57:31 2009 +# Linux kernel version: 2.6.30-rc3 +# Mon Apr 27 13:06:02 2009 # CONFIG_SUPERH=y CONFIG_SUPERH32=y +# CONFIG_SUPERH64 is not set CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig" CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_GENERIC_BUG=y @@ -70,6 +71,7 @@ CONFIG_UID16=y # CONFIG_SYSCTL_SYSCALL is not set CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_HOTPLUG is not set CONFIG_PRINTK=y CONFIG_BUG=y @@ -88,6 +90,7 @@ CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set # CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_IOREMAP_PROT=y @@ -95,6 +98,8 @@ CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_HAVE_CLK=y +CONFIG_HAVE_DMA_API_DEBUG=y +# CONFIG_SLOW_WORK is not set CONFIG_HAVE_GENERIC_DMA_COHERENT=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -106,7 +111,6 @@ CONFIG_MODULES=y # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -152,6 +156,7 @@ CONFIG_CPU_SUBTYPE_SH7750=y # CONFIG_CPU_SUBTYPE_SH7760 is not set # CONFIG_CPU_SUBTYPE_SH4_202 is not set # CONFIG_CPU_SUBTYPE_SH7723 is not set +# CONFIG_CPU_SUBTYPE_SH7724 is not set # CONFIG_CPU_SUBTYPE_SH7763 is not set # CONFIG_CPU_SUBTYPE_SH7770 is not set # CONFIG_CPU_SUBTYPE_SH7780 is not set @@ -161,8 +166,6 @@ CONFIG_CPU_SUBTYPE_SH7750=y # CONFIG_CPU_SUBTYPE_SH7343 is not set # CONFIG_CPU_SUBTYPE_SH7722 is not set # CONFIG_CPU_SUBTYPE_SH7366 is not set -# CONFIG_CPU_SUBTYPE_SH5_101 is not set -# CONFIG_CPU_SUBTYPE_SH5_103 is not set # # Memory management options @@ -553,6 +556,7 @@ CONFIG_SCSI_WAIT_SCAN=m CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set # CONFIG_LIBFC is not set +# CONFIG_LIBFCOE is not set # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_DH is not set # CONFIG_SCSI_OSD_INITIATOR is not set @@ -775,6 +779,11 @@ CONFIG_INOTIFY_USER=y # CONFIG_FUSE_FS is not set # +# Caches +# +# CONFIG_FSCACHE is not set + +# # CD-ROM/DVD Filesystems # # CONFIG_ISO9660_FS is not set @@ -829,6 +838,7 @@ CONFIG_JFFS2_RTIME=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y # CONFIG_NFS_V3 is not set @@ -886,10 +896,23 @@ CONFIG_FRAME_WARN=1024 CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_TRACING_SUPPORT=y # # Tracers # +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_SH_STANDARD_BIOS is not set @@ -989,6 +1012,7 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y +# CONFIG_BINARY_PRINTF is not set # # Library routines diff --git a/arch/sh/configs/se7751_defconfig b/arch/sh/configs/se7751_defconfig index 67fc26b3..55f3b78 100644 --- a/arch/sh/configs/se7751_defconfig +++ b/arch/sh/configs/se7751_defconfig @@ -1,10 +1,11 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29 -# Thu Apr 2 18:59:59 2009 +# Linux kernel version: 2.6.30-rc3 +# Mon Apr 27 13:06:44 2009 # CONFIG_SUPERH=y CONFIG_SUPERH32=y +# CONFIG_SUPERH64 is not set CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig" CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_GENERIC_BUG=y @@ -65,7 +66,6 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_RD_GZIP=y # CONFIG_RD_BZIP2 is not set # CONFIG_RD_LZMA is not set -CONFIG_INITRAMFS_COMPRESSION_NONE=y # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y CONFIG_ANON_INODES=y @@ -74,6 +74,7 @@ CONFIG_UID16=y # CONFIG_SYSCTL_SYSCALL is not set CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_HOTPLUG is not set CONFIG_PRINTK=y CONFIG_BUG=y @@ -92,6 +93,7 @@ CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set # CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_IOREMAP_PROT=y @@ -99,6 +101,8 @@ CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_HAVE_CLK=y +CONFIG_HAVE_DMA_API_DEBUG=y +# CONFIG_SLOW_WORK is not set CONFIG_HAVE_GENERIC_DMA_COHERENT=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -110,7 +114,6 @@ CONFIG_MODULES=y # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -156,6 +159,7 @@ CONFIG_CPU_SUBTYPE_SH7751=y # CONFIG_CPU_SUBTYPE_SH7760 is not set # CONFIG_CPU_SUBTYPE_SH4_202 is not set # CONFIG_CPU_SUBTYPE_SH7723 is not set +# CONFIG_CPU_SUBTYPE_SH7724 is not set # CONFIG_CPU_SUBTYPE_SH7763 is not set # CONFIG_CPU_SUBTYPE_SH7770 is not set # CONFIG_CPU_SUBTYPE_SH7780 is not set @@ -165,8 +169,6 @@ CONFIG_CPU_SUBTYPE_SH7751=y # CONFIG_CPU_SUBTYPE_SH7343 is not set # CONFIG_CPU_SUBTYPE_SH7722 is not set # CONFIG_CPU_SUBTYPE_SH7366 is not set -# CONFIG_CPU_SUBTYPE_SH5_101 is not set -# CONFIG_CPU_SUBTYPE_SH5_103 is not set # # Memory management options @@ -742,6 +744,11 @@ CONFIG_INOTIFY_USER=y # CONFIG_FUSE_FS is not set # +# Caches +# +# CONFIG_FSCACHE is not set + +# # CD-ROM/DVD Filesystems # # CONFIG_ISO9660_FS is not set @@ -796,6 +803,7 @@ CONFIG_JFFS2_RTIME=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y # CONFIG_NFS_FS is not set # CONFIG_NFSD is not set @@ -833,10 +841,23 @@ CONFIG_FRAME_WARN=1024 CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_TRACING_SUPPORT=y # # Tracers # +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_SH_STANDARD_BIOS is not set @@ -936,6 +957,7 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y +# CONFIG_BINARY_PRINTF is not set # # Library routines diff --git a/arch/sh/configs/se7780_defconfig b/arch/sh/configs/se7780_defconfig index ebce23c..c4f0af3 100644 --- a/arch/sh/configs/se7780_defconfig +++ b/arch/sh/configs/se7780_defconfig @@ -1,10 +1,11 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29 -# Thu Apr 2 19:02:05 2009 +# Linux kernel version: 2.6.30-rc3 +# Mon Apr 27 13:07:14 2009 # CONFIG_SUPERH=y CONFIG_SUPERH32=y +# CONFIG_SUPERH64 is not set CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig" CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_GENERIC_BUG=y @@ -67,6 +68,7 @@ CONFIG_EMBEDDED=y CONFIG_UID16=y CONFIG_SYSCTL_SYSCALL=y # CONFIG_KALLSYMS is not set +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_HOTPLUG is not set CONFIG_PRINTK=y CONFIG_BUG=y @@ -86,12 +88,15 @@ CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set # CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_HAVE_CLK=y +CONFIG_HAVE_DMA_API_DEBUG=y +# CONFIG_SLOW_WORK is not set CONFIG_HAVE_GENERIC_DMA_COHERENT=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -103,7 +108,6 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_BLK_DEV_INTEGRITY is not set # @@ -149,6 +153,7 @@ CONFIG_CPU_SH4A=y # CONFIG_CPU_SUBTYPE_SH7760 is not set # CONFIG_CPU_SUBTYPE_SH4_202 is not set # CONFIG_CPU_SUBTYPE_SH7723 is not set +# CONFIG_CPU_SUBTYPE_SH7724 is not set # CONFIG_CPU_SUBTYPE_SH7763 is not set # CONFIG_CPU_SUBTYPE_SH7770 is not set CONFIG_CPU_SUBTYPE_SH7780=y @@ -158,8 +163,6 @@ CONFIG_CPU_SUBTYPE_SH7780=y # CONFIG_CPU_SUBTYPE_SH7343 is not set # CONFIG_CPU_SUBTYPE_SH7722 is not set # CONFIG_CPU_SUBTYPE_SH7366 is not set -# CONFIG_CPU_SUBTYPE_SH5_101 is not set -# CONFIG_CPU_SUBTYPE_SH5_103 is not set # # Memory management options @@ -285,8 +288,6 @@ CONFIG_CMDLINE="console=ttySC0.115200 root=/dev/sda1" # CONFIG_PCI=y CONFIG_SH_PCIDMA_NONCOHERENT=y -CONFIG_PCI_AUTO=y -CONFIG_PCI_AUTO_UPDATE_RESOURCES=y # CONFIG_PCIEPORTBUS is not set # CONFIG_ARCH_SUPPORTS_MSI is not set CONFIG_PCI_LEGACY=y @@ -558,6 +559,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_MPT2SAS is not set # CONFIG_SCSI_HPTIOP is not set # CONFIG_LIBFC is not set +# CONFIG_LIBFCOE is not set # CONFIG_FCOE is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set @@ -957,15 +959,17 @@ CONFIG_USB_HID=y # # Special HID drivers # -CONFIG_HID_COMPAT=y CONFIG_HID_A4TECH=y CONFIG_HID_APPLE=y CONFIG_HID_BELKIN=y CONFIG_HID_CHERRY=y CONFIG_HID_CHICONY=y CONFIG_HID_CYPRESS=y +# CONFIG_DRAGONRISE_FF is not set CONFIG_HID_EZKEY=y +# CONFIG_HID_KYE is not set CONFIG_HID_GYRATION=y +# CONFIG_HID_KENSINGTON is not set CONFIG_HID_LOGITECH=y # CONFIG_LOGITECH_FF is not set # CONFIG_LOGIRUMBLEPAD2_FF is not set @@ -1122,6 +1126,10 @@ CONFIG_INOTIFY_USER=y # CONFIG_FUSE_FS is not set # +# Caches +# + +# # CD-ROM/DVD Filesystems # # CONFIG_ISO9660_FS is not set @@ -1245,11 +1253,24 @@ CONFIG_DEBUG_FS=y CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_TRACING_SUPPORT=y # # Tracers # +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_DYNAMIC_DEBUG is not set +# CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_SH_STANDARD_BIOS is not set @@ -1345,6 +1366,7 @@ CONFIG_CRYPTO=y # CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines diff --git a/arch/sh/configs/sh03_defconfig b/arch/sh/configs/sh03_defconfig index 6fcdb09..f9c6e51 100644 --- a/arch/sh/configs/sh03_defconfig +++ b/arch/sh/configs/sh03_defconfig @@ -1,10 +1,11 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29 -# Thu Apr 2 19:04:59 2009 +# Linux kernel version: 2.6.30-rc3 +# Mon Apr 27 13:07:56 2009 # CONFIG_SUPERH=y CONFIG_SUPERH32=y +# CONFIG_SUPERH64 is not set CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig" CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_GENERIC_BUG=y @@ -41,6 +42,7 @@ CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y +CONFIG_POSIX_MQUEUE_SYSCTL=y CONFIG_BSD_PROCESS_ACCT=y # CONFIG_BSD_PROCESS_ACCT_V3 is not set # CONFIG_TASKSTATS is not set @@ -67,7 +69,6 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_RD_GZIP=y # CONFIG_RD_BZIP2 is not set # CONFIG_RD_LZMA is not set -CONFIG_INITRAMFS_COMPRESSION_NONE=y CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=y CONFIG_ANON_INODES=y @@ -76,6 +77,7 @@ CONFIG_UID16=y # CONFIG_SYSCTL_SYSCALL is not set CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y @@ -105,6 +107,8 @@ CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_HAVE_CLK=y +CONFIG_HAVE_DMA_API_DEBUG=y +# CONFIG_SLOW_WORK is not set CONFIG_HAVE_GENERIC_DMA_COHERENT=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -117,7 +121,6 @@ CONFIG_MODVERSIONS=y # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -163,6 +166,7 @@ CONFIG_CPU_SUBTYPE_SH7751=y # CONFIG_CPU_SUBTYPE_SH7760 is not set # CONFIG_CPU_SUBTYPE_SH4_202 is not set # CONFIG_CPU_SUBTYPE_SH7723 is not set +# CONFIG_CPU_SUBTYPE_SH7724 is not set # CONFIG_CPU_SUBTYPE_SH7763 is not set # CONFIG_CPU_SUBTYPE_SH7770 is not set # CONFIG_CPU_SUBTYPE_SH7780 is not set @@ -172,8 +176,6 @@ CONFIG_CPU_SUBTYPE_SH7751=y # CONFIG_CPU_SUBTYPE_SH7343 is not set # CONFIG_CPU_SUBTYPE_SH7722 is not set # CONFIG_CPU_SUBTYPE_SH7366 is not set -# CONFIG_CPU_SUBTYPE_SH5_101 is not set -# CONFIG_CPU_SUBTYPE_SH5_103 is not set # # Memory management options @@ -300,8 +302,6 @@ CONFIG_CMDLINE="console=ttySC1,115200 mem=64M root=/dev/nfs" # CONFIG_PCI=y CONFIG_SH_PCIDMA_NONCOHERENT=y -CONFIG_PCI_AUTO=y -CONFIG_PCI_AUTO_UPDATE_RESOURCES=y # CONFIG_PCIEPORTBUS is not set # CONFIG_ARCH_SUPPORTS_MSI is not set CONFIG_PCI_LEGACY=y @@ -562,6 +562,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_MPT2SAS is not set # CONFIG_SCSI_HPTIOP is not set # CONFIG_LIBFC is not set +# CONFIG_LIBFCOE is not set # CONFIG_FCOE is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set @@ -656,6 +657,7 @@ CONFIG_NETDEV_1000=y # CONFIG_E1000E is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set +# CONFIG_IGBVF is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -679,6 +681,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set +# CONFIG_VXGE is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set # CONFIG_NIU is not set @@ -887,7 +890,6 @@ CONFIG_HID=y # # Special HID drivers # -CONFIG_HID_COMPAT=y CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y @@ -929,6 +931,7 @@ CONFIG_EXT2_FS_XATTR=y # CONFIG_EXT2_FS_SECURITY is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set CONFIG_EXT3_FS_XATTR=y CONFIG_EXT3_FS_POSIX_ACL=y # CONFIG_EXT3_FS_SECURITY is not set @@ -952,6 +955,11 @@ CONFIG_AUTOFS4_FS=y # CONFIG_FUSE_FS is not set # +# Caches +# +# CONFIG_FSCACHE is not set + +# # CD-ROM/DVD Filesystems # CONFIG_ISO9660_FS=m @@ -1001,6 +1009,7 @@ CONFIG_MISC_FILESYSTEMS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -1112,11 +1121,26 @@ CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_RING_BUFFER=y CONFIG_TRACING=y +CONFIG_TRACING_SUPPORT=y # # Tracers # +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set +# CONFIG_PREEMPT_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_FTRACE_STARTUP_TEST is not set # CONFIG_DYNAMIC_DEBUG is not set +# CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y CONFIG_SH_STANDARD_BIOS=y @@ -1228,6 +1252,7 @@ CONFIG_CRYPTO_DEFLATE=y # CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set +CONFIG_BINARY_PRINTF=y # # Library routines diff --git a/arch/sh/configs/sh7710voipgw_defconfig b/arch/sh/configs/sh7710voipgw_defconfig index 1ab37c0..48b5809 100644 --- a/arch/sh/configs/sh7710voipgw_defconfig +++ b/arch/sh/configs/sh7710voipgw_defconfig @@ -1,10 +1,11 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29 -# Thu Apr 2 19:09:01 2009 +# Linux kernel version: 2.6.30-rc3 +# Mon Apr 27 13:09:16 2009 # CONFIG_SUPERH=y CONFIG_SUPERH32=y +# CONFIG_SUPERH64 is not set CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig" CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_GENERIC_BUG=y @@ -39,6 +40,7 @@ CONFIG_LOCALVERSION_AUTO=y CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y +CONFIG_POSIX_MQUEUE_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set @@ -72,6 +74,7 @@ CONFIG_UID16=y # CONFIG_SYSCTL_SYSCALL is not set CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y @@ -90,6 +93,7 @@ CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set # CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_IOREMAP_PROT=y @@ -97,6 +101,8 @@ CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_HAVE_CLK=y +CONFIG_HAVE_DMA_API_DEBUG=y +# CONFIG_SLOW_WORK is not set CONFIG_HAVE_GENERIC_DMA_COHERENT=y CONFIG_SLABINFO=y CONFIG_BASE_SMALL=0 @@ -108,7 +114,6 @@ CONFIG_MODULE_FORCE_UNLOAD=y # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -154,6 +159,7 @@ CONFIG_CPU_SUBTYPE_SH7710=y # CONFIG_CPU_SUBTYPE_SH7760 is not set # CONFIG_CPU_SUBTYPE_SH4_202 is not set # CONFIG_CPU_SUBTYPE_SH7723 is not set +# CONFIG_CPU_SUBTYPE_SH7724 is not set # CONFIG_CPU_SUBTYPE_SH7763 is not set # CONFIG_CPU_SUBTYPE_SH7770 is not set # CONFIG_CPU_SUBTYPE_SH7780 is not set @@ -163,8 +169,6 @@ CONFIG_CPU_SUBTYPE_SH7710=y # CONFIG_CPU_SUBTYPE_SH7343 is not set # CONFIG_CPU_SUBTYPE_SH7722 is not set # CONFIG_CPU_SUBTYPE_SH7366 is not set -# CONFIG_CPU_SUBTYPE_SH5_101 is not set -# CONFIG_CPU_SUBTYPE_SH5_103 is not set # # Memory management options @@ -728,7 +732,6 @@ CONFIG_HID=y # # Special HID drivers # -CONFIG_HID_COMPAT=y CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y # CONFIG_USB_ARCH_HAS_OHCI is not set @@ -780,6 +783,11 @@ CONFIG_FILE_LOCKING=y # CONFIG_FUSE_FS is not set # +# Caches +# +# CONFIG_FSCACHE is not set + +# # CD-ROM/DVD Filesystems # # CONFIG_ISO9660_FS is not set @@ -834,6 +842,7 @@ CONFIG_JFFS2_RTIME=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y # CONFIG_NFS_FS is not set # CONFIG_NFSD is not set @@ -871,11 +880,24 @@ CONFIG_DEBUG_FS=y CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_TRACING_SUPPORT=y # # Tracers # +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_DYNAMIC_DEBUG is not set +# CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_SH_STANDARD_BIOS is not set @@ -975,6 +997,7 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y +# CONFIG_BINARY_PRINTF is not set # # Library routines diff --git a/arch/sh/configs/sh7724_generic_defconfig b/arch/sh/configs/sh7724_generic_defconfig index 268d04e..ec8f18c 100644 --- a/arch/sh/configs/sh7724_generic_defconfig +++ b/arch/sh/configs/sh7724_generic_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.30-rc2 -# Thu Apr 16 15:42:20 2009 +# Linux kernel version: 2.6.30-rc3 +# Mon Apr 27 13:09:47 2009 # CONFIG_SUPERH=y CONFIG_SUPERH32=y diff --git a/arch/sh/configs/sh7763rdp_defconfig b/arch/sh/configs/sh7763rdp_defconfig index c79bb84..f77bc79 100644 --- a/arch/sh/configs/sh7763rdp_defconfig +++ b/arch/sh/configs/sh7763rdp_defconfig @@ -1,10 +1,11 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29 -# Thu Apr 2 19:10:57 2009 +# Linux kernel version: 2.6.30-rc3 +# Mon Apr 27 13:10:12 2009 # CONFIG_SUPERH=y CONFIG_SUPERH32=y +# CONFIG_SUPERH64 is not set CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig" CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_GENERIC_BUG=y @@ -78,6 +79,7 @@ CONFIG_UID16=y # CONFIG_SYSCTL_SYSCALL is not set CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y @@ -106,6 +108,8 @@ CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_HAVE_CLK=y +CONFIG_HAVE_DMA_API_DEBUG=y +# CONFIG_SLOW_WORK is not set CONFIG_HAVE_GENERIC_DMA_COHERENT=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -117,7 +121,6 @@ CONFIG_MODULES=y # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -164,6 +167,7 @@ CONFIG_CPU_SH4A=y # CONFIG_CPU_SUBTYPE_SH7760 is not set # CONFIG_CPU_SUBTYPE_SH4_202 is not set # CONFIG_CPU_SUBTYPE_SH7723 is not set +# CONFIG_CPU_SUBTYPE_SH7724 is not set CONFIG_CPU_SUBTYPE_SH7763=y # CONFIG_CPU_SUBTYPE_SH7770 is not set # CONFIG_CPU_SUBTYPE_SH7780 is not set @@ -173,8 +177,6 @@ CONFIG_CPU_SUBTYPE_SH7763=y # CONFIG_CPU_SUBTYPE_SH7343 is not set # CONFIG_CPU_SUBTYPE_SH7722 is not set # CONFIG_CPU_SUBTYPE_SH7366 is not set -# CONFIG_CPU_SUBTYPE_SH5_101 is not set -# CONFIG_CPU_SUBTYPE_SH5_103 is not set # # Memory management options @@ -555,6 +557,7 @@ CONFIG_SCSI_WAIT_SCAN=m CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set # CONFIG_LIBFC is not set +# CONFIG_LIBFCOE is not set # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_DH is not set # CONFIG_SCSI_OSD_INITIATOR is not set @@ -941,6 +944,7 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set @@ -965,6 +969,11 @@ CONFIG_AUTOFS4_FS=y CONFIG_GENERIC_ACL=y # +# Caches +# +# CONFIG_FSCACHE is not set + +# # CD-ROM/DVD Filesystems # # CONFIG_ISO9660_FS is not set @@ -1012,6 +1021,7 @@ CONFIG_MISC_FILESYSTEMS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y # CONFIG_NFS_V3 is not set @@ -1100,11 +1110,25 @@ CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_RING_BUFFER=y CONFIG_TRACING=y +CONFIG_TRACING_SUPPORT=y # # Tracers # +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_FTRACE_STARTUP_TEST is not set # CONFIG_DYNAMIC_DEBUG is not set +# CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_SH_STANDARD_BIOS is not set @@ -1204,6 +1228,7 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y +CONFIG_BINARY_PRINTF=y # # Library routines diff --git a/arch/sh/configs/sh7785lcr_32bit_defconfig b/arch/sh/configs/sh7785lcr_32bit_defconfig index a6cf4505..1c55b80 100644 --- a/arch/sh/configs/sh7785lcr_32bit_defconfig +++ b/arch/sh/configs/sh7785lcr_32bit_defconfig @@ -1,10 +1,11 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29 -# Thu Apr 2 19:12:18 2009 +# Linux kernel version: 2.6.30-rc3 +# Mon Apr 27 13:10:53 2009 # CONFIG_SUPERH=y CONFIG_SUPERH32=y +# CONFIG_SUPERH64 is not set CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig" CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_GENERIC_BUG=y @@ -79,6 +80,7 @@ CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y @@ -98,6 +100,7 @@ CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set CONFIG_PROFILING=y +# CONFIG_MARKERS is not set # CONFIG_OPROFILE is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set @@ -106,6 +109,8 @@ CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_HAVE_CLK=y +CONFIG_HAVE_DMA_API_DEBUG=y +# CONFIG_SLOW_WORK is not set CONFIG_HAVE_GENERIC_DMA_COHERENT=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -118,7 +123,6 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -166,6 +170,7 @@ CONFIG_CPU_SHX2=y # CONFIG_CPU_SUBTYPE_SH7760 is not set # CONFIG_CPU_SUBTYPE_SH4_202 is not set # CONFIG_CPU_SUBTYPE_SH7723 is not set +# CONFIG_CPU_SUBTYPE_SH7724 is not set # CONFIG_CPU_SUBTYPE_SH7763 is not set # CONFIG_CPU_SUBTYPE_SH7770 is not set # CONFIG_CPU_SUBTYPE_SH7780 is not set @@ -175,8 +180,6 @@ CONFIG_CPU_SUBTYPE_SH7785=y # CONFIG_CPU_SUBTYPE_SH7343 is not set # CONFIG_CPU_SUBTYPE_SH7722 is not set # CONFIG_CPU_SUBTYPE_SH7366 is not set -# CONFIG_CPU_SUBTYPE_SH5_101 is not set -# CONFIG_CPU_SUBTYPE_SH5_103 is not set # # Memory management options @@ -310,8 +313,6 @@ CONFIG_BOOT_LINK_OFFSET=0x00800000 # CONFIG_PCI=y CONFIG_SH_PCIDMA_NONCOHERENT=y -CONFIG_PCI_AUTO=y -CONFIG_PCI_AUTO_UPDATE_RESOURCES=y # CONFIG_PCIEPORTBUS is not set # CONFIG_ARCH_SUPPORTS_MSI is not set CONFIG_PCI_LEGACY=y @@ -672,6 +673,7 @@ CONFIG_NETDEV_1000=y # CONFIG_E1000E is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set +# CONFIG_IGBVF is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -1009,15 +1011,17 @@ CONFIG_USB_HID=y # # Special HID drivers # -CONFIG_HID_COMPAT=y CONFIG_HID_A4TECH=y CONFIG_HID_APPLE=y CONFIG_HID_BELKIN=y CONFIG_HID_CHERRY=y CONFIG_HID_CHICONY=y CONFIG_HID_CYPRESS=y +# CONFIG_DRAGONRISE_FF is not set CONFIG_HID_EZKEY=y +# CONFIG_HID_KYE is not set CONFIG_HID_GYRATION=y +# CONFIG_HID_KENSINGTON is not set CONFIG_HID_LOGITECH=y # CONFIG_LOGITECH_FF is not set # CONFIG_LOGIRUMBLEPAD2_FF is not set @@ -1218,6 +1222,7 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set @@ -1240,6 +1245,11 @@ CONFIG_INOTIFY_USER=y # CONFIG_FUSE_FS is not set # +# Caches +# +# CONFIG_FSCACHE is not set + +# # CD-ROM/DVD Filesystems # # CONFIG_ISO9660_FS is not set @@ -1289,6 +1299,7 @@ CONFIG_MINIX_FS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -1377,6 +1388,9 @@ CONFIG_DEBUG_KERNEL=y CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set @@ -1413,6 +1427,7 @@ CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_TRACING_SUPPORT=y # # Tracers @@ -1422,9 +1437,14 @@ CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y # CONFIG_PREEMPT_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set # CONFIG_BOOT_TRACER is not set # CONFIG_TRACE_BRANCH_PROFILING is not set # CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set @@ -1542,6 +1562,7 @@ CONFIG_CRYPTO_DES=y # # CONFIG_CRYPTO_ANSI_CPRNG is not set # CONFIG_CRYPTO_HW is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines diff --git a/arch/sh/configs/sh7785lcr_defconfig b/arch/sh/configs/sh7785lcr_defconfig index e4fac2e..4385fe9 100644 --- a/arch/sh/configs/sh7785lcr_defconfig +++ b/arch/sh/configs/sh7785lcr_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.30-rc2 -# Wed Apr 22 19:17:56 2009 +# Linux kernel version: 2.6.30-rc3 +# Mon Apr 27 13:11:48 2009 # CONFIG_SUPERH=y CONFIG_SUPERH32=y @@ -307,8 +307,6 @@ CONFIG_BOOT_LINK_OFFSET=0x00800000 # CONFIG_PCI=y CONFIG_SH_PCIDMA_NONCOHERENT=y -CONFIG_PCI_AUTO=y -CONFIG_PCI_AUTO_UPDATE_RESOURCES=y # CONFIG_PCIEPORTBUS is not set # CONFIG_ARCH_SUPPORTS_MSI is not set CONFIG_PCI_LEGACY=y diff --git a/arch/sh/configs/shmin_defconfig b/arch/sh/configs/shmin_defconfig index d695e90..4e12025 100644 --- a/arch/sh/configs/shmin_defconfig +++ b/arch/sh/configs/shmin_defconfig @@ -1,10 +1,11 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29 -# Thu Apr 2 19:19:03 2009 +# Linux kernel version: 2.6.30-rc3 +# Mon Apr 27 13:12:41 2009 # CONFIG_SUPERH=y CONFIG_SUPERH32=y +# CONFIG_SUPERH64 is not set CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig" CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_GENERIC_FIND_NEXT_BIT=y @@ -63,6 +64,7 @@ CONFIG_EMBEDDED=y # CONFIG_UID16 is not set # CONFIG_SYSCTL_SYSCALL is not set # CONFIG_KALLSYMS is not set +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_HOTPLUG is not set CONFIG_PRINTK=y # CONFIG_BUG is not set @@ -81,12 +83,15 @@ CONFIG_COMPAT_BRK=y # CONFIG_SLUB is not set CONFIG_SLOB=y # CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_HAVE_CLK=y +CONFIG_HAVE_DMA_API_DEBUG=y +# CONFIG_SLOW_WORK is not set CONFIG_HAVE_GENERIC_DMA_COHERENT=y CONFIG_BASE_SMALL=1 # CONFIG_MODULES is not set @@ -137,6 +142,7 @@ CONFIG_CPU_SUBTYPE_SH7706=y # CONFIG_CPU_SUBTYPE_SH7760 is not set # CONFIG_CPU_SUBTYPE_SH4_202 is not set # CONFIG_CPU_SUBTYPE_SH7723 is not set +# CONFIG_CPU_SUBTYPE_SH7724 is not set # CONFIG_CPU_SUBTYPE_SH7763 is not set # CONFIG_CPU_SUBTYPE_SH7770 is not set # CONFIG_CPU_SUBTYPE_SH7780 is not set @@ -146,8 +152,6 @@ CONFIG_CPU_SUBTYPE_SH7706=y # CONFIG_CPU_SUBTYPE_SH7343 is not set # CONFIG_CPU_SUBTYPE_SH7722 is not set # CONFIG_CPU_SUBTYPE_SH7366 is not set -# CONFIG_CPU_SUBTYPE_SH5_101 is not set -# CONFIG_CPU_SUBTYPE_SH5_103 is not set # # Memory management options @@ -675,6 +679,11 @@ CONFIG_FILE_LOCKING=y # CONFIG_FUSE_FS is not set # +# Caches +# +# CONFIG_FSCACHE is not set + +# # CD-ROM/DVD Filesystems # # CONFIG_ISO9660_FS is not set @@ -718,6 +727,7 @@ CONFIG_CRAMFS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -762,10 +772,22 @@ CONFIG_FRAME_WARN=1024 CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_TRACING_SUPPORT=y # # Tracers # +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y CONFIG_SH_STANDARD_BIOS=y @@ -864,6 +886,7 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y +# CONFIG_BINARY_PRINTF is not set # # Library routines diff --git a/arch/sh/configs/shx3_defconfig b/arch/sh/configs/shx3_defconfig index e3651f5..c088144 100644 --- a/arch/sh/configs/shx3_defconfig +++ b/arch/sh/configs/shx3_defconfig @@ -1,10 +1,11 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29 -# Thu Apr 2 19:20:54 2009 +# Linux kernel version: 2.6.30-rc3 +# Mon Apr 27 13:13:12 2009 # CONFIG_SUPERH=y CONFIG_SUPERH32=y +# CONFIG_SUPERH64 is not set CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig" CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_GENERIC_BUG=y @@ -42,6 +43,7 @@ CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y +CONFIG_POSIX_MQUEUE_SYSCTL=y CONFIG_BSD_PROCESS_ACCT=y # CONFIG_BSD_PROCESS_ACCT_V3 is not set # CONFIG_TASKSTATS is not set @@ -96,6 +98,7 @@ CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y # CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y @@ -126,6 +129,8 @@ CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_USE_GENERIC_SMP_HELPERS=y CONFIG_HAVE_CLK=y +CONFIG_HAVE_DMA_API_DEBUG=y +# CONFIG_SLOW_WORK is not set CONFIG_HAVE_GENERIC_DMA_COHERENT=y CONFIG_RT_MUTEXES=y CONFIG_BASE_SMALL=0 @@ -138,7 +143,6 @@ CONFIG_MODULE_UNLOAD=y CONFIG_STOP_MACHINE=y CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -186,6 +190,7 @@ CONFIG_CPU_SHX3=y # CONFIG_CPU_SUBTYPE_SH7760 is not set # CONFIG_CPU_SUBTYPE_SH4_202 is not set # CONFIG_CPU_SUBTYPE_SH7723 is not set +# CONFIG_CPU_SUBTYPE_SH7724 is not set # CONFIG_CPU_SUBTYPE_SH7763 is not set # CONFIG_CPU_SUBTYPE_SH7770 is not set # CONFIG_CPU_SUBTYPE_SH7780 is not set @@ -195,8 +200,6 @@ CONFIG_CPU_SUBTYPE_SHX3=y # CONFIG_CPU_SUBTYPE_SH7343 is not set # CONFIG_CPU_SUBTYPE_SH7722 is not set # CONFIG_CPU_SUBTYPE_SH7366 is not set -# CONFIG_CPU_SUBTYPE_SH5_101 is not set -# CONFIG_CPU_SUBTYPE_SH5_103 is not set # # Memory management options @@ -553,6 +556,7 @@ CONFIG_SCSI_WAIT_SCAN=m CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set # CONFIG_LIBFC is not set +# CONFIG_LIBFCOE is not set # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_DH is not set # CONFIG_SCSI_OSD_INITIATOR is not set @@ -646,6 +650,7 @@ CONFIG_DEVKMEM=y # # Non-8250 serial port support # +# CONFIG_SERIAL_MAX3100 is not set CONFIG_SERIAL_SH_SCI=y CONFIG_SERIAL_SH_SCI_NR_UARTS=2 CONFIG_SERIAL_SH_SCI_CONSOLE=y @@ -985,6 +990,7 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set @@ -1008,6 +1014,11 @@ CONFIG_INOTIFY_USER=y # CONFIG_FUSE_FS is not set # +# Caches +# +# CONFIG_FSCACHE is not set + +# # CD-ROM/DVD Filesystems # # CONFIG_ISO9660_FS is not set @@ -1051,6 +1062,7 @@ CONFIG_MISC_FILESYSTEMS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y # CONFIG_NFS_FS is not set # CONFIG_NFSD is not set @@ -1085,6 +1097,9 @@ CONFIG_DEBUG_SHIRQ=y CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set @@ -1124,6 +1139,7 @@ CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_RING_BUFFER=y CONFIG_TRACING=y +CONFIG_TRACING_SUPPORT=y # # Tracers @@ -1133,11 +1149,16 @@ CONFIG_TRACING=y # CONFIG_PREEMPT_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set # CONFIG_BOOT_TRACER is not set # CONFIG_TRACE_BRANCH_PROFILING is not set # CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_FTRACE_STARTUP_TEST is not set # CONFIG_DYNAMIC_DEBUG is not set +# CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set @@ -1245,6 +1266,7 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y +CONFIG_BINARY_PRINTF=y # # Library routines diff --git a/arch/sh/configs/snapgear_defconfig b/arch/sh/configs/snapgear_defconfig index 6960f60..54a7a3c 100644 --- a/arch/sh/configs/snapgear_defconfig +++ b/arch/sh/configs/snapgear_defconfig @@ -1,10 +1,11 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29 -# Thu Apr 2 19:21:39 2009 +# Linux kernel version: 2.6.30-rc3 +# Mon Apr 27 13:14:00 2009 # CONFIG_SUPERH=y CONFIG_SUPERH32=y +# CONFIG_SUPERH64 is not set CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig" CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_GENERIC_BUG=y @@ -64,7 +65,6 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_RD_GZIP=y # CONFIG_RD_BZIP2 is not set # CONFIG_RD_LZMA is not set -CONFIG_INITRAMFS_COMPRESSION_NONE=y CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=y CONFIG_ANON_INODES=y @@ -73,6 +73,7 @@ CONFIG_UID16=y # CONFIG_SYSCTL_SYSCALL is not set CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_HOTPLUG is not set CONFIG_PRINTK=y CONFIG_BUG=y @@ -92,12 +93,15 @@ CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set # CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_HAVE_CLK=y +CONFIG_HAVE_DMA_API_DEBUG=y +# CONFIG_SLOW_WORK is not set CONFIG_HAVE_GENERIC_DMA_COHERENT=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -105,7 +109,6 @@ CONFIG_BASE_SMALL=0 # CONFIG_MODULES is not set CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -151,6 +154,7 @@ CONFIG_CPU_SUBTYPE_SH7751R=y # CONFIG_CPU_SUBTYPE_SH7760 is not set # CONFIG_CPU_SUBTYPE_SH4_202 is not set # CONFIG_CPU_SUBTYPE_SH7723 is not set +# CONFIG_CPU_SUBTYPE_SH7724 is not set # CONFIG_CPU_SUBTYPE_SH7763 is not set # CONFIG_CPU_SUBTYPE_SH7770 is not set # CONFIG_CPU_SUBTYPE_SH7780 is not set @@ -160,8 +164,6 @@ CONFIG_CPU_SUBTYPE_SH7751R=y # CONFIG_CPU_SUBTYPE_SH7343 is not set # CONFIG_CPU_SUBTYPE_SH7722 is not set # CONFIG_CPU_SUBTYPE_SH7366 is not set -# CONFIG_CPU_SUBTYPE_SH5_101 is not set -# CONFIG_CPU_SUBTYPE_SH5_103 is not set # # Memory management options @@ -295,8 +297,6 @@ CONFIG_BOOT_LINK_OFFSET=0x00800000 # CONFIG_PCI=y CONFIG_SH_PCIDMA_NONCOHERENT=y -CONFIG_PCI_AUTO=y -CONFIG_PCI_AUTO_UPDATE_RESOURCES=y # CONFIG_PCIEPORTBUS is not set # CONFIG_ARCH_SUPPORTS_MSI is not set CONFIG_PCI_LEGACY=y @@ -763,6 +763,11 @@ CONFIG_FILE_LOCKING=y # CONFIG_FUSE_FS is not set # +# Caches +# +# CONFIG_FSCACHE is not set + +# # CD-ROM/DVD Filesystems # # CONFIG_ISO9660_FS is not set @@ -805,8 +810,13 @@ CONFIG_CRAMFS=y # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set CONFIG_ROMFS_FS=y +CONFIG_ROMFS_BACKED_BY_BLOCK=y +# CONFIG_ROMFS_BACKED_BY_MTD is not set +# CONFIG_ROMFS_BACKED_BY_BOTH is not set +CONFIG_ROMFS_ON_BLOCK=y # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y # CONFIG_NFS_FS is not set # CONFIG_NFSD is not set @@ -844,10 +854,23 @@ CONFIG_FRAME_WARN=1024 CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_TRACING_SUPPORT=y # # Tracers # +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_SH_STANDARD_BIOS is not set @@ -862,6 +885,7 @@ CONFIG_HAVE_ARCH_KGDB=y # CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set # CONFIG_CRYPTO is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines diff --git a/arch/sh/configs/systemh_defconfig b/arch/sh/configs/systemh_defconfig index 7ea639b..dbe7e54 100644 --- a/arch/sh/configs/systemh_defconfig +++ b/arch/sh/configs/systemh_defconfig @@ -1,10 +1,11 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29 -# Thu Apr 2 19:23:31 2009 +# Linux kernel version: 2.6.30-rc3 +# Mon Apr 27 13:14:33 2009 # CONFIG_SUPERH=y CONFIG_SUPERH32=y +# CONFIG_SUPERH64 is not set CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig" CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_GENERIC_BUG=y @@ -61,7 +62,6 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_RD_GZIP=y # CONFIG_RD_BZIP2 is not set # CONFIG_RD_LZMA is not set -CONFIG_INITRAMFS_COMPRESSION_NONE=y # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y CONFIG_ANON_INODES=y @@ -70,6 +70,7 @@ CONFIG_UID16=y # CONFIG_SYSCTL_SYSCALL is not set CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_HOTPLUG is not set CONFIG_PRINTK=y CONFIG_BUG=y @@ -88,6 +89,7 @@ CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set # CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_IOREMAP_PROT=y @@ -95,6 +97,8 @@ CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_HAVE_CLK=y +CONFIG_HAVE_DMA_API_DEBUG=y +# CONFIG_SLOW_WORK is not set CONFIG_HAVE_GENERIC_DMA_COHERENT=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -107,7 +111,6 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -153,6 +156,7 @@ CONFIG_CPU_SUBTYPE_SH7751R=y # CONFIG_CPU_SUBTYPE_SH7760 is not set # CONFIG_CPU_SUBTYPE_SH4_202 is not set # CONFIG_CPU_SUBTYPE_SH7723 is not set +# CONFIG_CPU_SUBTYPE_SH7724 is not set # CONFIG_CPU_SUBTYPE_SH7763 is not set # CONFIG_CPU_SUBTYPE_SH7770 is not set # CONFIG_CPU_SUBTYPE_SH7780 is not set @@ -162,8 +166,6 @@ CONFIG_CPU_SUBTYPE_SH7751R=y # CONFIG_CPU_SUBTYPE_SH7343 is not set # CONFIG_CPU_SUBTYPE_SH7722 is not set # CONFIG_CPU_SUBTYPE_SH7366 is not set -# CONFIG_CPU_SUBTYPE_SH5_101 is not set -# CONFIG_CPU_SUBTYPE_SH5_103 is not set # # Memory management options @@ -506,6 +508,11 @@ CONFIG_INOTIFY_USER=y # CONFIG_FUSE_FS is not set # +# Caches +# +# CONFIG_FSCACHE is not set + +# # CD-ROM/DVD Filesystems # # CONFIG_ISO9660_FS is not set @@ -547,8 +554,13 @@ CONFIG_CRAMFS=y # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set CONFIG_ROMFS_FS=y +CONFIG_ROMFS_BACKED_BY_BLOCK=y +# CONFIG_ROMFS_BACKED_BY_MTD is not set +# CONFIG_ROMFS_BACKED_BY_BOTH is not set +CONFIG_ROMFS_ON_BLOCK=y # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set # # Partition Types @@ -577,10 +589,24 @@ CONFIG_FRAME_WARN=1024 CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_TRACING_SUPPORT=y # # Tracers # +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set +# CONFIG_PREEMPT_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_SH_STANDARD_BIOS is not set @@ -595,6 +621,7 @@ CONFIG_HAVE_ARCH_KGDB=y # CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set # CONFIG_CRYPTO is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines diff --git a/arch/sh/configs/titan_defconfig b/arch/sh/configs/titan_defconfig index bbeb4c6..8ca94ef 100644 --- a/arch/sh/configs/titan_defconfig +++ b/arch/sh/configs/titan_defconfig @@ -1,10 +1,11 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29 -# Thu Apr 2 19:24:55 2009 +# Linux kernel version: 2.6.30-rc3 +# Mon Apr 27 13:14:55 2009 # CONFIG_SUPERH=y CONFIG_SUPERH32=y +# CONFIG_SUPERH64 is not set CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig" CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_GENERIC_BUG=y @@ -40,6 +41,7 @@ CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y +CONFIG_POSIX_MQUEUE_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set @@ -66,7 +68,6 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_RD_GZIP=y # CONFIG_RD_BZIP2 is not set # CONFIG_RD_LZMA is not set -CONFIG_INITRAMFS_COMPRESSION_NONE=y # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y CONFIG_ANON_INODES=y @@ -76,6 +77,7 @@ CONFIG_UID16=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y @@ -95,6 +97,7 @@ CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set # CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_IOREMAP_PROT=y @@ -102,6 +105,8 @@ CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_HAVE_CLK=y +CONFIG_HAVE_DMA_API_DEBUG=y +# CONFIG_SLOW_WORK is not set CONFIG_HAVE_GENERIC_DMA_COHERENT=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -114,7 +119,6 @@ CONFIG_MODULE_FORCE_UNLOAD=y # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -160,6 +164,7 @@ CONFIG_CPU_SUBTYPE_SH7751R=y # CONFIG_CPU_SUBTYPE_SH7760 is not set # CONFIG_CPU_SUBTYPE_SH4_202 is not set # CONFIG_CPU_SUBTYPE_SH7723 is not set +# CONFIG_CPU_SUBTYPE_SH7724 is not set # CONFIG_CPU_SUBTYPE_SH7763 is not set # CONFIG_CPU_SUBTYPE_SH7770 is not set # CONFIG_CPU_SUBTYPE_SH7780 is not set @@ -169,8 +174,6 @@ CONFIG_CPU_SUBTYPE_SH7751R=y # CONFIG_CPU_SUBTYPE_SH7343 is not set # CONFIG_CPU_SUBTYPE_SH7722 is not set # CONFIG_CPU_SUBTYPE_SH7366 is not set -# CONFIG_CPU_SUBTYPE_SH5_101 is not set -# CONFIG_CPU_SUBTYPE_SH5_103 is not set # # Memory management options @@ -305,8 +308,6 @@ CONFIG_CMDLINE="console=ttySC1,38400N81 root=/dev/nfs ip=:::::eth1:autoconf rw" # CONFIG_PCI=y CONFIG_SH_PCIDMA_NONCOHERENT=y -CONFIG_PCI_AUTO=y -CONFIG_PCI_AUTO_UPDATE_RESOURCES=y # CONFIG_PCIEPORTBUS is not set # CONFIG_ARCH_SUPPORTS_MSI is not set CONFIG_PCI_LEGACY=y @@ -789,6 +790,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_MPT2SAS is not set # CONFIG_SCSI_HPTIOP is not set # CONFIG_LIBFC is not set +# CONFIG_LIBFCOE is not set # CONFIG_FCOE is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set @@ -906,6 +908,7 @@ CONFIG_NETDEV_1000=y # CONFIG_E1000E is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set +# CONFIG_IGBVF is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -929,6 +932,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set +# CONFIG_VXGE is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set # CONFIG_NIU is not set @@ -1182,7 +1186,6 @@ CONFIG_HID=y # # Special HID drivers # -CONFIG_HID_COMPAT=y CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y @@ -1393,6 +1396,7 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set # CONFIG_EXT3_FS_XATTR is not set # CONFIG_EXT4_FS is not set CONFIG_JBD=y @@ -1419,6 +1423,11 @@ CONFIG_INOTIFY_USER=y CONFIG_FUSE_FS=m # +# Caches +# +# CONFIG_FSCACHE is not set + +# # CD-ROM/DVD Filesystems # CONFIG_ISO9660_FS=m @@ -1467,8 +1476,13 @@ CONFIG_MISC_FILESYSTEMS=y # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set CONFIG_ROMFS_FS=y +CONFIG_ROMFS_BACKED_BY_BLOCK=y +# CONFIG_ROMFS_BACKED_BY_MTD is not set +# CONFIG_ROMFS_BACKED_BY_BOTH is not set +CONFIG_ROMFS_ON_BLOCK=y # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -1576,6 +1590,7 @@ CONFIG_MAGIC_SYSRQ=y CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_SHIRQ is not set # CONFIG_DETECT_SOFTLOCKUP is not set +# CONFIG_DETECT_HUNG_TASK is not set CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set @@ -1610,6 +1625,7 @@ CONFIG_SCHED_DEBUG=y CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_TRACING_SUPPORT=y # # Tracers @@ -1618,9 +1634,14 @@ CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y # CONFIG_IRQSOFF_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set # CONFIG_BOOT_TRACER is not set # CONFIG_TRACE_BRANCH_PROFILING is not set # CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set @@ -1741,6 +1762,7 @@ CONFIG_CRYPTO_DEFLATE=y # CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines diff --git a/arch/sh/configs/ul2_defconfig b/arch/sh/configs/ul2_defconfig index 34f5192..bfb4d98 100644 --- a/arch/sh/configs/ul2_defconfig +++ b/arch/sh/configs/ul2_defconfig @@ -1,10 +1,11 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29 -# Thu Apr 2 19:30:27 2009 +# Linux kernel version: 2.6.30-rc3 +# Mon Apr 27 13:17:05 2009 # CONFIG_SUPERH=y CONFIG_SUPERH32=y +# CONFIG_SUPERH64 is not set CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig" CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_GENERIC_BUG=y @@ -69,7 +70,6 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_RD_GZIP=y # CONFIG_RD_BZIP2 is not set # CONFIG_RD_LZMA is not set -CONFIG_INITRAMFS_COMPRESSION_NONE=y CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=y CONFIG_ANON_INODES=y @@ -78,6 +78,7 @@ CONFIG_UID16=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y @@ -97,6 +98,7 @@ CONFIG_COMPAT_BRK=y CONFIG_SLUB=y # CONFIG_SLOB is not set CONFIG_PROFILING=y +# CONFIG_MARKERS is not set # CONFIG_OPROFILE is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set @@ -105,6 +107,8 @@ CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_HAVE_CLK=y +CONFIG_HAVE_DMA_API_DEBUG=y +# CONFIG_SLOW_WORK is not set CONFIG_HAVE_GENERIC_DMA_COHERENT=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -117,7 +121,6 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -167,6 +170,7 @@ CONFIG_ARCH_SHMOBILE=y # CONFIG_CPU_SUBTYPE_SH7760 is not set # CONFIG_CPU_SUBTYPE_SH4_202 is not set # CONFIG_CPU_SUBTYPE_SH7723 is not set +# CONFIG_CPU_SUBTYPE_SH7724 is not set # CONFIG_CPU_SUBTYPE_SH7763 is not set # CONFIG_CPU_SUBTYPE_SH7770 is not set # CONFIG_CPU_SUBTYPE_SH7780 is not set @@ -176,8 +180,6 @@ CONFIG_ARCH_SHMOBILE=y # CONFIG_CPU_SUBTYPE_SH7343 is not set # CONFIG_CPU_SUBTYPE_SH7722 is not set CONFIG_CPU_SUBTYPE_SH7366=y -# CONFIG_CPU_SUBTYPE_SH5_101 is not set -# CONFIG_CPU_SUBTYPE_SH5_103 is not set # # Memory management options @@ -584,6 +586,7 @@ CONFIG_SCSI_WAIT_SCAN=m CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set # CONFIG_LIBFC is not set +# CONFIG_LIBFCOE is not set # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_DH is not set # CONFIG_SCSI_OSD_INITIATOR is not set @@ -936,6 +939,7 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set @@ -958,6 +962,11 @@ CONFIG_INOTIFY_USER=y # CONFIG_FUSE_FS is not set # +# Caches +# +# CONFIG_FSCACHE is not set + +# # CD-ROM/DVD Filesystems # # CONFIG_ISO9660_FS is not set @@ -1005,6 +1014,7 @@ CONFIG_CRAMFS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y # CONFIG_NFS_V3 is not set @@ -1095,10 +1105,24 @@ CONFIG_FRAME_WARN=1024 CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_TRACING_SUPPORT=y # # Tracers # +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set +# CONFIG_PREEMPT_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_SH_STANDARD_BIOS is not set @@ -1208,6 +1232,7 @@ CONFIG_CRYPTO_ARC4=y # # CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y +# CONFIG_BINARY_PRINTF is not set # # Library routines diff --git a/arch/sh/configs/urquell_defconfig b/arch/sh/configs/urquell_defconfig index d174b1a..512664f 100644 --- a/arch/sh/configs/urquell_defconfig +++ b/arch/sh/configs/urquell_defconfig @@ -1,10 +1,11 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29 -# Thu Apr 2 19:33:39 2009 +# Linux kernel version: 2.6.30-rc3 +# Mon Apr 27 14:02:55 2009 # CONFIG_SUPERH=y CONFIG_SUPERH32=y +# CONFIG_SUPERH64 is not set CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig" CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_GENERIC_BUG=y @@ -76,6 +77,7 @@ CONFIG_UID16=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y @@ -94,6 +96,7 @@ CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set CONFIG_PROFILING=y +# CONFIG_MARKERS is not set # CONFIG_OPROFILE is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set @@ -102,6 +105,8 @@ CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_HAVE_CLK=y +CONFIG_HAVE_DMA_API_DEBUG=y +# CONFIG_SLOW_WORK is not set CONFIG_HAVE_GENERIC_DMA_COHERENT=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -114,7 +119,6 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -162,6 +166,7 @@ CONFIG_CPU_SHX3=y # CONFIG_CPU_SUBTYPE_SH7760 is not set # CONFIG_CPU_SUBTYPE_SH4_202 is not set # CONFIG_CPU_SUBTYPE_SH7723 is not set +# CONFIG_CPU_SUBTYPE_SH7724 is not set # CONFIG_CPU_SUBTYPE_SH7763 is not set # CONFIG_CPU_SUBTYPE_SH7770 is not set # CONFIG_CPU_SUBTYPE_SH7780 is not set @@ -171,8 +176,6 @@ CONFIG_CPU_SUBTYPE_SH7786=y # CONFIG_CPU_SUBTYPE_SH7343 is not set # CONFIG_CPU_SUBTYPE_SH7722 is not set # CONFIG_CPU_SUBTYPE_SH7366 is not set -# CONFIG_CPU_SUBTYPE_SH5_101 is not set -# CONFIG_CPU_SUBTYPE_SH5_103 is not set # # Memory management options @@ -900,15 +903,17 @@ CONFIG_USB_HID=y # # Special HID drivers # -CONFIG_HID_COMPAT=y CONFIG_HID_A4TECH=y CONFIG_HID_APPLE=y CONFIG_HID_BELKIN=y CONFIG_HID_CHERRY=y CONFIG_HID_CHICONY=y CONFIG_HID_CYPRESS=y +# CONFIG_DRAGONRISE_FF is not set CONFIG_HID_EZKEY=y +# CONFIG_HID_KYE is not set CONFIG_HID_GYRATION=y +# CONFIG_HID_KENSINGTON is not set CONFIG_HID_LOGITECH=y # CONFIG_LOGITECH_FF is not set # CONFIG_LOGIRUMBLEPAD2_FF is not set @@ -1046,6 +1051,7 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set @@ -1068,6 +1074,11 @@ CONFIG_INOTIFY_USER=y # CONFIG_FUSE_FS is not set # +# Caches +# +# CONFIG_FSCACHE is not set + +# # CD-ROM/DVD Filesystems # # CONFIG_ISO9660_FS is not set @@ -1117,6 +1128,7 @@ CONFIG_MINIX_FS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -1209,10 +1221,24 @@ CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_TRACING_SUPPORT=y # # Tracers # +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set +# CONFIG_PREEMPT_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_SH_STANDARD_BIOS is not set @@ -1322,6 +1348,7 @@ CONFIG_CRYPTO_DES=y # # CONFIG_CRYPTO_ANSI_CPRNG is not set # CONFIG_CRYPTO_HW is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines -- cgit v0.10.2 From 5be7c0a4d3dfe25091f2e4e524103e81d9e7e180 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Mon, 27 Apr 2009 14:40:47 +0900 Subject: sh: select GENERIC_TIME for new CMT driver. Signed-off-by: Paul Mundt diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig index 4c68fde..1647489 100644 --- a/arch/sh/Kconfig +++ b/arch/sh/Kconfig @@ -476,10 +476,11 @@ config SH_TIMER_CMT bool "CMT clockevents driver" depends on SYS_SUPPORTS_CMT && !SH_CMT select GENERIC_CLOCKEVENTS + select GENERIC_TIME config SH_MTU2 bool "MTU2 timer support" - depends on CPU_SH2A + depends on CPU_SH2A && !GENERIC_TIME default y help This enables the use of the MTU2 as the system timer. -- cgit v0.10.2 From 47c8a08bbe77ad3c06f63919a14b0f0b0cd54390 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Mon, 27 Apr 2009 17:34:39 +0900 Subject: sh: rtc-generic support. This adds rtc-generic support for SUPERH32. Signed-off-by: Paul Mundt diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig index 1647489..9db02ce 100644 --- a/arch/sh/Kconfig +++ b/arch/sh/Kconfig @@ -30,6 +30,7 @@ config SUPERH32 select HAVE_DYNAMIC_FTRACE select HAVE_ARCH_KGDB select ARCH_HIBERNATION_POSSIBLE if MMU + select RTC_LIB config SUPERH64 def_bool ARCH = "sh64" diff --git a/arch/sh/include/asm/rtc.h b/arch/sh/include/asm/rtc.h index f7b010d..52b0c2d 100644 --- a/arch/sh/include/asm/rtc.h +++ b/arch/sh/include/asm/rtc.h @@ -6,6 +6,17 @@ extern void (*board_time_init)(void); extern void (*rtc_sh_get_time)(struct timespec *); extern int (*rtc_sh_set_time)(const time_t); +/* some dummy definitions */ +#define RTC_BATT_BAD 0x100 /* battery bad */ +#define RTC_SQWE 0x08 /* enable square-wave output */ +#define RTC_DM_BINARY 0x04 /* all time/date values are BCD if clear */ +#define RTC_24H 0x02 /* 24 hour mode - else hours bit 7 means pm */ +#define RTC_DST_EN 0x01 /* auto switch DST - works f. USA only */ + +struct rtc_time; +unsigned int get_rtc_time(struct rtc_time *); +int set_rtc_time(struct rtc_time *); + #define RTC_CAP_4_DIGIT_YEAR (1 << 0) struct sh_rtc_platform_info { diff --git a/arch/sh/kernel/time_32.c b/arch/sh/kernel/time_32.c index c770413..109409f 100644 --- a/arch/sh/kernel/time_32.c +++ b/arch/sh/kernel/time_32.c @@ -19,6 +19,7 @@ #include /* for rtc_lock */ #include #include +#include #include #include #include @@ -45,6 +46,28 @@ static int null_rtc_set_time(const time_t secs) void (*rtc_sh_get_time)(struct timespec *) = null_rtc_get_time; int (*rtc_sh_set_time)(const time_t) = null_rtc_set_time; +unsigned int get_rtc_time(struct rtc_time *tm) +{ + if (rtc_sh_get_time != null_rtc_get_time) { + struct timespec tv; + + rtc_sh_get_time(&tv); + rtc_time_to_tm(tv.tv_sec, tm); + } + + return RTC_24H; +} +EXPORT_SYMBOL(get_rtc_time); + +int set_rtc_time(struct rtc_time *tm) +{ + unsigned long secs; + + rtc_tm_to_time(tm, &secs); + return rtc_sh_set_time(secs); +} +EXPORT_SYMBOL(set_rtc_time); + #ifndef CONFIG_GENERIC_TIME void do_gettimeofday(struct timeval *tv) { diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig index 4e9851f..277d35d 100644 --- a/drivers/rtc/Kconfig +++ b/drivers/rtc/Kconfig @@ -692,7 +692,7 @@ config RTC_DRV_GENERIC tristate "Generic RTC support" # Please consider writing a new RTC driver instead of using the generic # RTC abstraction - depends on PARISC || M68K || PPC + depends on PARISC || M68K || PPC || SUPERH32 help Say Y or M here to enable RTC support on systems using the generic RTC abstraction. If you do not know what you are doing, you should -- cgit v0.10.2 From c2e0090c668fc99f5be65fd9907da781cb6a2ef5 Mon Sep 17 00:00:00 2001 From: Jean-Christophe PLAGNIOL-VILLARD Date: Mon, 27 Apr 2009 17:54:41 +0900 Subject: sh: mach-r2d: add physmap-flash support for R2D+ boards. The RTS7751R2D_1 boards only support 1MB of socket-mounted MBM29F040 flash, which we just leave alone as it's not terribly interesting. This adds support for the s29gl256p on the r2d+ boards that makes a bit more sense to expose to the user. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD Signed-off-by: Paul Mundt diff --git a/arch/sh/boards/mach-r2d/setup.c b/arch/sh/boards/mach-r2d/setup.c index c585be0..a625ecb 100644 --- a/arch/sh/boards/mach-r2d/setup.c +++ b/arch/sh/boards/mach-r2d/setup.c @@ -10,6 +10,9 @@ */ #include #include +#include +#include +#include #include #include #include @@ -181,6 +184,50 @@ static struct platform_device sm501_device = { .resource = sm501_resources, }; +static struct mtd_partition r2d_partitions[] = { + { + .name = "U-Boot", + .offset = 0x00000000, + .size = 0x00040000, + .mask_flags = MTD_WRITEABLE, + }, { + .name = "Environment", + .offset = MTDPART_OFS_NXTBLK, + .size = 0x00040000, + .mask_flags = MTD_WRITEABLE, + }, { + .name = "Kernel", + .offset = MTDPART_OFS_NXTBLK, + .size = 0x001c0000, + }, { + .name = "Flash_FS", + .offset = MTDPART_OFS_NXTBLK, + .size = MTDPART_SIZ_FULL, + } +}; + +static struct physmap_flash_data flash_data = { + .width = 2, + .nr_parts = ARRAY_SIZE(r2d_partitions), + .parts = r2d_partitions, +}; + +static struct resource flash_resource = { + .start = 0x00000000, + .end = 0x02000000, + .flags = IORESOURCE_MEM, +}; + +static struct platform_device flash_device = { + .name = "physmap-flash", + .id = -1, + .resource = &flash_resource, + .num_resources = 1, + .dev = { + .platform_data = &flash_data, + }, +}; + static struct platform_device *rts7751r2d_devices[] __initdata = { &sm501_device, &heartbeat_device, @@ -203,6 +250,9 @@ static int __init rts7751r2d_devices_setup(void) if (register_trapped_io(&cf_trapped_io) == 0) platform_device_register(&cf_ide_device); + if (mach_is_r2d_plus()) + platform_device_register(&flash_device); + spi_register_board_info(spi_bus, ARRAY_SIZE(spi_bus)); return platform_add_devices(rts7751r2d_devices, diff --git a/arch/sh/configs/rts7751r2dplus_defconfig b/arch/sh/configs/rts7751r2dplus_defconfig index 2bc1c97..a860435 100644 --- a/arch/sh/configs/rts7751r2dplus_defconfig +++ b/arch/sh/configs/rts7751r2dplus_defconfig @@ -424,7 +424,92 @@ CONFIG_FIRMWARE_IN_KERNEL=y CONFIG_EXTRA_FIRMWARE="" # CONFIG_SYS_HYPERVISOR is not set # CONFIG_CONNECTOR is not set -# CONFIG_MTD is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +CONFIG_MTD_CONCAT=y +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_TESTS is not set +# CONFIG_MTD_REDBOOT_PARTS is not set +CONFIG_MTD_CMDLINE_PARTS=y +# CONFIG_MTD_AR7_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +# CONFIG_MTD_BLKDEVS is not set +# CONFIG_MTD_BLOCK is not set +# CONFIG_MTD_BLOCK_RO is not set +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_GEN_PROBE=y +# CONFIG_MTD_CFI_ADV_OPTIONS is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_CFI_INTELEXT is not set +CONFIG_MTD_CFI_AMDSTD=y +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +CONFIG_MTD_PHYSMAP=y +# CONFIG_MTD_PHYSMAP_COMPAT is not set +# CONFIG_MTD_INTEL_VR_NOR is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_PMC551 is not set +# CONFIG_MTD_DATAFLASH is not set +# CONFIG_MTD_M25P80 is not set +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +# CONFIG_MTD_NAND is not set +# CONFIG_MTD_ONENAND is not set + +# +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_CPQ_CISS_DA is not set -- cgit v0.10.2 From 5b644c7a218702668d7b610994e7dcbc3d4705d3 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Tue, 28 Apr 2009 08:17:54 +0000 Subject: clocksource: improve sh_cmt clocksource overflow handling This patch improves the sh_cmt clocksource handling. Currently the counter value is ignored in the case of overflow. With this patch the overflow flag is read before and after reading the counter, removing any counter value and overflow flag mismatch issues. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt diff --git a/drivers/clocksource/sh_cmt.c b/drivers/clocksource/sh_cmt.c index c247564..d607ac2 100644 --- a/drivers/clocksource/sh_cmt.c +++ b/drivers/clocksource/sh_cmt.c @@ -111,16 +111,21 @@ static unsigned long sh_cmt_get_counter(struct sh_cmt_priv *p, int *has_wrapped) { unsigned long v1, v2, v3; + int o1, o2; + + o1 = sh_cmt_read(p, CMCSR) & p->overflow_bit; /* Make sure the timer value is stable. Stolen from acpi_pm.c */ do { + o2 = o1; v1 = sh_cmt_read(p, CMCNT); v2 = sh_cmt_read(p, CMCNT); v3 = sh_cmt_read(p, CMCNT); - } while (unlikely((v1 > v2 && v1 < v3) || (v2 > v3 && v2 < v1) - || (v3 > v1 && v3 < v2))); + o1 = sh_cmt_read(p, CMCSR) & p->overflow_bit; + } while (unlikely((o1 != o2) || (v1 > v2 && v1 < v3) + || (v2 > v3 && v2 < v1) || (v3 > v1 && v3 < v2))); - *has_wrapped = sh_cmt_read(p, CMCSR) & p->overflow_bit; + *has_wrapped = o1; return v2; } @@ -394,7 +399,7 @@ static cycle_t sh_cmt_clocksource_read(struct clocksource *cs) raw = sh_cmt_get_counter(p, &has_wrapped); if (unlikely(has_wrapped)) - raw = p->match_value; + raw += p->match_value; spin_unlock_irqrestore(&p->lock, flags); return value + raw; -- cgit v0.10.2 From 8e0b842948156e3463879caed12b4ce51bed772e Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Tue, 28 Apr 2009 08:19:50 +0000 Subject: sh: setup timers in late_time_init() This patch moves the SuperH timer setup code from time_init() to late_time_init(). Good things about this change: - interrupts: they are enabled at late_time_init() - mm: regular kmalloc() can be used at late_time_init() Together with moving to late_time_init() this patch changes the sh_cmt driver to always allocate with kmalloc(). This simplifies the code a bit and also fixes section mismatches. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt diff --git a/arch/sh/kernel/time_32.c b/arch/sh/kernel/time_32.c index 109409f..a2458bf 100644 --- a/arch/sh/kernel/time_32.c +++ b/arch/sh/kernel/time_32.c @@ -237,21 +237,8 @@ unsigned long long sched_clock(void) } #endif -void __init time_init(void) +static void __init sh_late_time_init(void) { - if (board_time_init) - board_time_init(); - - clk_init(); - - rtc_sh_get_time(&xtime); - set_normalized_timespec(&wall_to_monotonic, - -xtime.tv_sec, -xtime.tv_nsec); - -#ifdef CONFIG_GENERIC_CLOCKEVENTS_BROADCAST - local_timer_setup(smp_processor_id()); -#endif - /* * Make sure all compiled-in early timers register themselves. * Run probe() for one "earlytimer" device. @@ -270,3 +257,22 @@ void __init time_init(void) printk(KERN_INFO "Using %s for system timer\n", sys_timer->name); } + +void __init time_init(void) +{ + if (board_time_init) + board_time_init(); + + clk_init(); + + rtc_sh_get_time(&xtime); + set_normalized_timespec(&wall_to_monotonic, + -xtime.tv_sec, -xtime.tv_nsec); + +#ifdef CONFIG_GENERIC_CLOCKEVENTS_BROADCAST + local_timer_setup(smp_processor_id()); +#endif + + late_time_init = sh_late_time_init; +} + diff --git a/drivers/clocksource/sh_cmt.c b/drivers/clocksource/sh_cmt.c index d607ac2..bf3e4c1 100644 --- a/drivers/clocksource/sh_cmt.c +++ b/drivers/clocksource/sh_cmt.c @@ -18,7 +18,6 @@ */ #include -#include #include #include #include @@ -645,11 +644,7 @@ static int __devinit sh_cmt_probe(struct platform_device *pdev) return 0; } - if (is_early_platform_device(pdev)) - p = alloc_bootmem(sizeof(*p)); - else - p = kmalloc(sizeof(*p), GFP_KERNEL); - + p = kmalloc(sizeof(*p), GFP_KERNEL); if (p == NULL) { dev_err(&pdev->dev, "failed to allocate driver data\n"); return -ENOMEM; @@ -657,11 +652,7 @@ static int __devinit sh_cmt_probe(struct platform_device *pdev) ret = sh_cmt_setup(p, pdev); if (ret) { - if (is_early_platform_device(pdev)) - free_bootmem(__pa(p), sizeof(*p)); - else - kfree(p); - + kfree(p); platform_set_drvdata(pdev, NULL); } return ret; -- cgit v0.10.2 From 4278600644dee621bd50d7498e244b135612e0f6 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Tue, 28 Apr 2009 23:12:10 +0900 Subject: sh: register the rtc-generic platform device properly. The device registration was accidentally omitted, add it back in. Do some basic device probing as well, so this doesn't show up for platforms that tie in to the RTC interface properly. Signed-off-by: Paul Mundt diff --git a/arch/sh/kernel/time_32.c b/arch/sh/kernel/time_32.c index a2458bf..4573321 100644 --- a/arch/sh/kernel/time_32.c +++ b/arch/sh/kernel/time_32.c @@ -3,7 +3,7 @@ * * Copyright (C) 1999 Tetsuya Okada & Niibe Yutaka * Copyright (C) 2000 Philipp Rumpf - * Copyright (C) 2002 - 2008 Paul Mundt + * Copyright (C) 2002 - 2009 Paul Mundt * Copyright (C) 2002 M. R. Brown * * Some code taken from i386 version. @@ -68,6 +68,21 @@ int set_rtc_time(struct rtc_time *tm) } EXPORT_SYMBOL(set_rtc_time); +static int __init rtc_generic_init(void) +{ + struct platform_device *pdev; + + if (rtc_sh_get_time == null_rtc_get_time) + return -ENODEV; + + pdev = platform_device_register_simple("rtc-generic", -1, NULL, 0); + if (IS_ERR(pdev)) + return PTR_ERR(pdev); + + return 0; +} +module_init(rtc_generic_init); + #ifndef CONFIG_GENERIC_TIME void do_gettimeofday(struct timeval *tv) { -- cgit v0.10.2 From e6be3a25861429166f945499c7ee616875bc3db9 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Thu, 30 Apr 2009 12:56:37 +0900 Subject: sh: pass through ioremap() for non-mmu processors. All 32-bit SuperH processors currently go through __ioremap_mode() and check for IO_TRAPPED and directly mapped segments. With this patch we simplify the MMU less case with a pass through version of __ioremap_mode() which just returns the physical address. The effects of this is change are: - fix non-MMU ioremap() of high address hardware blocks (sh7203 CMT) - make sure IO_TRAPPED is not selected Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt diff --git a/arch/sh/boards/Kconfig b/arch/sh/boards/Kconfig index dcc1af8..99e2d47 100644 --- a/arch/sh/boards/Kconfig +++ b/arch/sh/boards/Kconfig @@ -121,7 +121,7 @@ config SH_RTS7751R2D bool "RTS7751R2D" depends on CPU_SUBTYPE_SH7751R select SYS_SUPPORTS_PCI - select IO_TRAPPED + select IO_TRAPPED if MMU help Select RTS7751R2D if configuring for a Renesas Technology Sales SH-Graphics board. @@ -145,13 +145,13 @@ config SH_HIGHLANDER bool "Highlander" depends on CPU_SUBTYPE_SH7780 || CPU_SUBTYPE_SH7785 select SYS_SUPPORTS_PCI - select IO_TRAPPED + select IO_TRAPPED if MMU config SH_SH7785LCR bool "SH7785LCR" depends on CPU_SUBTYPE_SH7785 select SYS_SUPPORTS_PCI - select IO_TRAPPED + select IO_TRAPPED if MMU config SH_SH7785LCR_29BIT_PHYSMAPS bool "SH7785LCR 29bit physmaps" diff --git a/arch/sh/include/asm/io.h b/arch/sh/include/asm/io.h index 0454f8d..ef21734 100644 --- a/arch/sh/include/asm/io.h +++ b/arch/sh/include/asm/io.h @@ -228,12 +228,6 @@ void __iounmap(void __iomem *addr); unsigned long onchip_remap(unsigned long addr, unsigned long size, const char *name); extern void onchip_unmap(unsigned long vaddr); -#else -#define __ioremap(offset, size, flags) ((void __iomem *)(offset)) -#define __iounmap(addr) do { } while (0) -#define onchip_remap(addr, size, name) (addr) -#define onchip_unmap(addr) do { } while (0) -#endif /* CONFIG_MMU */ static inline void __iomem * __ioremap_mode(unsigned long offset, unsigned long size, unsigned long flags) @@ -268,6 +262,12 @@ __ioremap_mode(unsigned long offset, unsigned long size, unsigned long flags) return __ioremap(offset, size, flags); } +#else +#define onchip_remap(addr, size, name) (addr) +#define onchip_unmap(addr) do { } while (0) +#define __ioremap_mode(offset, size, flags) ((void __iomem *)(offset)) +#define __iounmap(addr) do { } while (0) +#endif /* CONFIG_MMU */ #define ioremap(offset, size) \ __ioremap_mode((offset), (size), 0) -- cgit v0.10.2 From 3014f47460ecfb13d4169daae51f26a20bacfa17 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Wed, 29 Apr 2009 14:50:37 +0000 Subject: clocksource: sh_cmt 16-bit fixes This patch contains various fixes for 16-bit cmt hardware. With this applied periodic clockevents work fine on sh7203. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt diff --git a/drivers/clocksource/sh_cmt.c b/drivers/clocksource/sh_cmt.c index bf3e4c1..4ff1508 100644 --- a/drivers/clocksource/sh_cmt.c +++ b/drivers/clocksource/sh_cmt.c @@ -158,16 +158,18 @@ static int sh_cmt_enable(struct sh_cmt_priv *p, unsigned long *rate) pr_err("sh_cmt: cannot enable clock \"%s\"\n", cfg->clk); return ret; } - *rate = clk_get_rate(p->clk) / 8; /* make sure channel is disabled */ sh_cmt_start_stop_ch(p, 0); /* configure channel, periodic mode and maximum timeout */ - if (p->width == 16) - sh_cmt_write(p, CMCSR, 0); - else + if (p->width == 16) { + *rate = clk_get_rate(p->clk) / 512; + sh_cmt_write(p, CMCSR, 0x43); + } else { + *rate = clk_get_rate(p->clk) / 8; sh_cmt_write(p, CMCSR, 0x01a4); + } sh_cmt_write(p, CMCOR, 0xffffffff); sh_cmt_write(p, CMCNT, 0); @@ -615,7 +617,7 @@ static int sh_cmt_setup(struct sh_cmt_priv *p, struct platform_device *pdev) if (resource_size(res) == 6) { p->width = 16; p->overflow_bit = 0x80; - p->clear_bits = ~0xc0; + p->clear_bits = ~0x80; } else { p->width = 32; p->overflow_bit = 0x8000; -- cgit v0.10.2 From 698aa99da5f5e2b4c666fd21ab77306f0225b8f5 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Thu, 30 Apr 2009 04:08:18 +0000 Subject: sh: sh2/sh2a 16-bit CMT platform data This patch adds 16-bit cmt platform data for the following cpus: - sh7619 (2 channels) - sh7203/sh7263 (2 channels) - sh7206 (2 channels) Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt diff --git a/arch/sh/kernel/cpu/sh2/setup-sh7619.c b/arch/sh/kernel/cpu/sh2/setup-sh7619.c index 0e32d8e..d70c263 100644 --- a/arch/sh/kernel/cpu/sh2/setup-sh7619.c +++ b/arch/sh/kernel/cpu/sh2/setup-sh7619.c @@ -12,6 +12,8 @@ #include #include #include +#include +#include enum { UNUSED = 0, @@ -109,9 +111,75 @@ static struct platform_device eth_device = { .resource = eth_resources, }; +static struct sh_cmt_config cmt0_platform_data = { + .name = "CMT0", + .channel_offset = 0x02, + .timer_bit = 0, + .clk = "module_clk", + .clockevent_rating = 125, + .clocksource_rating = 0, /* disabled due to code generation issues */ +}; + +static struct resource cmt0_resources[] = { + [0] = { + .name = "CMT0", + .start = 0xf84a0072, + .end = 0xf84a0077, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 86, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device cmt0_device = { + .name = "sh_cmt", + .id = 0, + .dev = { + .platform_data = &cmt0_platform_data, + }, + .resource = cmt0_resources, + .num_resources = ARRAY_SIZE(cmt0_resources), +}; + +static struct sh_cmt_config cmt1_platform_data = { + .name = "CMT1", + .channel_offset = 0x08, + .timer_bit = 1, + .clk = "module_clk", + .clockevent_rating = 125, + .clocksource_rating = 0, /* disabled due to code generation issues */ +}; + +static struct resource cmt1_resources[] = { + [0] = { + .name = "CMT1", + .start = 0xf84a0078, + .end = 0xf84a007d, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 87, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device cmt1_device = { + .name = "sh_cmt", + .id = 1, + .dev = { + .platform_data = &cmt1_platform_data, + }, + .resource = cmt1_resources, + .num_resources = ARRAY_SIZE(cmt1_resources), +}; + static struct platform_device *sh7619_devices[] __initdata = { &sci_device, ð_device, + &cmt0_device, + &cmt1_device, }; static int __init sh7619_devices_setup(void) @@ -125,3 +193,19 @@ void __init plat_irq_setup(void) { register_intc_controller(&intc_desc); } + +static struct platform_device *sh7619_early_devices[] __initdata = { + &cmt0_device, + &cmt1_device, +}; + +#define STBCR3 0xf80a0000 + +void __init plat_early_device_setup(void) +{ + /* enable CMT clock */ + __raw_writeb(__raw_readb(STBCR3) & ~0x10, STBCR3); + + early_platform_add_devices(sh7619_early_devices, + ARRAY_SIZE(sh7619_early_devices)); +} diff --git a/arch/sh/kernel/cpu/sh2a/setup-sh7203.c b/arch/sh/kernel/cpu/sh2a/setup-sh7203.c index 820dfb2..0836ace 100644 --- a/arch/sh/kernel/cpu/sh2a/setup-sh7203.c +++ b/arch/sh/kernel/cpu/sh2a/setup-sh7203.c @@ -11,6 +11,8 @@ #include #include #include +#include +#include enum { UNUSED = 0, @@ -205,6 +207,70 @@ static struct platform_device sci_device = { }, }; +static struct sh_cmt_config cmt0_platform_data = { + .name = "CMT0", + .channel_offset = 0x02, + .timer_bit = 0, + .clk = "module_clk", + .clockevent_rating = 125, + .clocksource_rating = 0, /* disabled due to code generation issues */ +}; + +static struct resource cmt0_resources[] = { + [0] = { + .name = "CMT0", + .start = 0xfffec002, + .end = 0xfffec007, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 142, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device cmt0_device = { + .name = "sh_cmt", + .id = 0, + .dev = { + .platform_data = &cmt0_platform_data, + }, + .resource = cmt0_resources, + .num_resources = ARRAY_SIZE(cmt0_resources), +}; + +static struct sh_cmt_config cmt1_platform_data = { + .name = "CMT1", + .channel_offset = 0x08, + .timer_bit = 1, + .clk = "module_clk", + .clockevent_rating = 125, + .clocksource_rating = 0, /* disabled due to code generation issues */ +}; + +static struct resource cmt1_resources[] = { + [0] = { + .name = "CMT1", + .start = 0xfffec008, + .end = 0xfffec00d, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 143, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device cmt1_device = { + .name = "sh_cmt", + .id = 1, + .dev = { + .platform_data = &cmt1_platform_data, + }, + .resource = cmt1_resources, + .num_resources = ARRAY_SIZE(cmt1_resources), +}; + static struct resource rtc_resources[] = { [0] = { .start = 0xffff2000, @@ -227,6 +293,8 @@ static struct platform_device rtc_device = { static struct platform_device *sh7203_devices[] __initdata = { &sci_device, + &cmt0_device, + &cmt1_device, &rtc_device, }; @@ -241,3 +309,19 @@ void __init plat_irq_setup(void) { register_intc_controller(&intc_desc); } + +static struct platform_device *sh7203_early_devices[] __initdata = { + &cmt0_device, + &cmt1_device, +}; + +#define STBCR4 0xfffe040c + +void __init plat_early_device_setup(void) +{ + /* enable CMT clock */ + __raw_writeb(__raw_readb(STBCR4) & ~0x04, STBCR4); + + early_platform_add_devices(sh7203_early_devices, + ARRAY_SIZE(sh7203_early_devices)); +} diff --git a/arch/sh/kernel/cpu/sh2a/setup-sh7206.c b/arch/sh/kernel/cpu/sh2a/setup-sh7206.c index c46a835..f9606e3 100644 --- a/arch/sh/kernel/cpu/sh2a/setup-sh7206.c +++ b/arch/sh/kernel/cpu/sh2a/setup-sh7206.c @@ -12,6 +12,8 @@ #include #include #include +#include +#include enum { UNUSED = 0, @@ -165,8 +167,74 @@ static struct platform_device sci_device = { }, }; +static struct sh_cmt_config cmt0_platform_data = { + .name = "CMT0", + .channel_offset = 0x02, + .timer_bit = 0, + .clk = "module_clk", + .clockevent_rating = 125, + .clocksource_rating = 0, /* disabled due to code generation issues */ +}; + +static struct resource cmt0_resources[] = { + [0] = { + .name = "CMT0", + .start = 0xfffec002, + .end = 0xfffec007, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 140, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device cmt0_device = { + .name = "sh_cmt", + .id = 0, + .dev = { + .platform_data = &cmt0_platform_data, + }, + .resource = cmt0_resources, + .num_resources = ARRAY_SIZE(cmt0_resources), +}; + +static struct sh_cmt_config cmt1_platform_data = { + .name = "CMT1", + .channel_offset = 0x08, + .timer_bit = 1, + .clk = "module_clk", + .clockevent_rating = 125, + .clocksource_rating = 0, /* disabled due to code generation issues */ +}; + +static struct resource cmt1_resources[] = { + [0] = { + .name = "CMT1", + .start = 0xfffec008, + .end = 0xfffec00d, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 144, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device cmt1_device = { + .name = "sh_cmt", + .id = 1, + .dev = { + .platform_data = &cmt1_platform_data, + }, + .resource = cmt1_resources, + .num_resources = ARRAY_SIZE(cmt1_resources), +}; + static struct platform_device *sh7206_devices[] __initdata = { &sci_device, + &cmt0_device, + &cmt1_device, }; static int __init sh7206_devices_setup(void) @@ -180,3 +248,19 @@ void __init plat_irq_setup(void) { register_intc_controller(&intc_desc); } + +static struct platform_device *sh7206_early_devices[] __initdata = { + &cmt0_device, + &cmt1_device, +}; + +#define STBCR4 0xfffe040c + +void __init plat_early_device_setup(void) +{ + /* enable CMT clock */ + __raw_writeb(__raw_readb(STBCR4) & ~0x04, STBCR4); + + early_platform_add_devices(sh7206_early_devices, + ARRAY_SIZE(sh7206_early_devices)); +} -- cgit v0.10.2 From f425752fc66acf1d4e47970ea704ed7d31c14173 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Thu, 30 Apr 2009 04:09:26 +0000 Subject: sh: remove old CMT driver This patch removes the old CMT driver (CONFIG_SH_CMT/timer-cmt.c) As replacement, select the sh_cmt driver with CONFIG_SH_TIMER_CMT and configure timer channel using platform data. If multiple CMT channels are enabled using platform data, use the earlytimer parameter on the kernel command line to select channel. For instance, use "earlytimer=sh_cmt.0" to select the first channel. To verify which timer is being used, look at printouts or the timer irq count in /proc/interrupts. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig index 9db02ce..7e96ade 100644 --- a/arch/sh/Kconfig +++ b/arch/sh/Kconfig @@ -462,22 +462,14 @@ config SH_TMU help This enables the use of the TMU as the system timer. -config SH_CMT - bool "CMT timer support" - depends on SYS_SUPPORTS_CMT && CPU_SH2 - default y - help - This enables the use of the CMT as the system timer. - -# -# Support for the new-style CMT driver. This will replace SH_CMT -# once its other dependencies are merged. -# config SH_TIMER_CMT - bool "CMT clockevents driver" - depends on SYS_SUPPORTS_CMT && !SH_CMT + bool "CMT timer driver" + depends on SYS_SUPPORTS_CMT + default y select GENERIC_CLOCKEVENTS select GENERIC_TIME + help + This enables build of the CMT timer driver. config SH_MTU2 bool "MTU2 timer support" diff --git a/arch/sh/include/asm/timer.h b/arch/sh/include/asm/timer.h index 4c3b66e3..8f80a55 100644 --- a/arch/sh/include/asm/timer.h +++ b/arch/sh/include/asm/timer.h @@ -23,7 +23,7 @@ struct sys_timer { #define TICK_SIZE (tick_nsec / 1000) -extern struct sys_timer tmu_timer, cmt_timer, mtu2_timer; +extern struct sys_timer tmu_timer, mtu2_timer; extern struct sys_timer *sys_timer; #ifndef CONFIG_GENERIC_TIME diff --git a/arch/sh/kernel/timers/Makefile b/arch/sh/kernel/timers/Makefile index 0b7f857..1e9a104 100644 --- a/arch/sh/kernel/timers/Makefile +++ b/arch/sh/kernel/timers/Makefile @@ -6,6 +6,5 @@ obj-y := timer.o obj-$(CONFIG_SH_TMU) += timer-tmu.o obj-$(CONFIG_SH_MTU2) += timer-mtu2.o -obj-$(CONFIG_SH_CMT) += timer-cmt.o obj-$(CONFIG_GENERIC_CLOCKEVENTS_BROADCAST) += timer-broadcast.o diff --git a/arch/sh/kernel/timers/timer-cmt.c b/arch/sh/kernel/timers/timer-cmt.c deleted file mode 100644 index 9aa3486..0000000 --- a/arch/sh/kernel/timers/timer-cmt.c +++ /dev/null @@ -1,188 +0,0 @@ -/* - * arch/sh/kernel/timers/timer-cmt.c - CMT Timer Support - * - * Copyright (C) 2005 Yoshinori Sato - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#if defined(CONFIG_CPU_SUBTYPE_SH7619) -#define CMT_CMSTR 0xf84a0070 -#define CMT_CMCSR_0 0xf84a0072 -#define CMT_CMCNT_0 0xf84a0074 -#define CMT_CMCOR_0 0xf84a0076 -#define CMT_CMCSR_1 0xf84a0078 -#define CMT_CMCNT_1 0xf84a007a -#define CMT_CMCOR_1 0xf84a007c - -#define STBCR3 0xf80a0000 -#define cmt_clock_enable() do { ctrl_outb(ctrl_inb(STBCR3) & ~0x10, STBCR3); } while(0) -#define CMT_CMCSR_INIT 0x0040 -#define CMT_CMCSR_CALIB 0x0000 -#elif defined(CONFIG_CPU_SUBTYPE_SH7203) || \ - defined(CONFIG_CPU_SUBTYPE_SH7206) || \ - defined(CONFIG_CPU_SUBTYPE_SH7263) -#define CMT_CMSTR 0xfffec000 -#define CMT_CMCSR_0 0xfffec002 -#define CMT_CMCNT_0 0xfffec004 -#define CMT_CMCOR_0 0xfffec006 - -#define STBCR4 0xfffe040c -#define cmt_clock_enable() do { ctrl_outb(ctrl_inb(STBCR4) & ~0x04, STBCR4); } while(0) -#define CMT_CMCSR_INIT 0x0040 -#define CMT_CMCSR_CALIB 0x0000 -#else -#error "Unknown CPU SUBTYPE" -#endif - -static unsigned long cmt_timer_get_offset(void) -{ - int count; - static unsigned short count_p = 0xffff; /* for the first call after boot */ - static unsigned long jiffies_p = 0; - - /* - * cache volatile jiffies temporarily; we have IRQs turned off. - */ - unsigned long jiffies_t; - - /* timer count may underflow right here */ - count = ctrl_inw(CMT_CMCOR_0); - count -= ctrl_inw(CMT_CMCNT_0); - - jiffies_t = jiffies; - - /* - * avoiding timer inconsistencies (they are rare, but they happen)... - * there is one kind of problem that must be avoided here: - * 1. the timer counter underflows - */ - - if (jiffies_t == jiffies_p) { - if (count > count_p) { - /* the nutcase */ - if (ctrl_inw(CMT_CMCSR_0) & 0x80) { /* Check CMF bit */ - count -= LATCH; - } else { - printk("%s (): hardware timer problem?\n", - __func__); - } - } - } else - jiffies_p = jiffies_t; - - count_p = count; - - count = ((LATCH-1) - count) * TICK_SIZE; - count = (count + LATCH/2) / LATCH; - - return count; -} - -static irqreturn_t cmt_timer_interrupt(int irq, void *dev_id) -{ - unsigned long timer_status; - - /* Clear CMF bit */ - timer_status = ctrl_inw(CMT_CMCSR_0); - timer_status &= ~0x80; - ctrl_outw(timer_status, CMT_CMCSR_0); - - handle_timer_tick(); - - return IRQ_HANDLED; -} - -static struct irqaction cmt_irq = { - .name = "timer", - .handler = cmt_timer_interrupt, - .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL, -}; - -static void cmt_clk_init(struct clk *clk) -{ - u8 divisor = CMT_CMCSR_INIT & 0x3; - ctrl_inw(CMT_CMCSR_0); - ctrl_outw(CMT_CMCSR_INIT, CMT_CMCSR_0); - clk->parent = clk_get(NULL, "module_clk"); - clk->rate = clk->parent->rate / (8 << (divisor << 1)); -} - -static void cmt_clk_recalc(struct clk *clk) -{ - u8 divisor = ctrl_inw(CMT_CMCSR_0) & 0x3; - clk->rate = clk->parent->rate / (8 << (divisor << 1)); -} - -static struct clk_ops cmt_clk_ops = { - .init = cmt_clk_init, - .recalc = cmt_clk_recalc, -}; - -static struct clk cmt0_clk = { - .name = "cmt0_clk", - .ops = &cmt_clk_ops, -}; - -static int cmt_timer_start(void) -{ - ctrl_outw(ctrl_inw(CMT_CMSTR) | 0x01, CMT_CMSTR); - return 0; -} - -static int cmt_timer_stop(void) -{ - ctrl_outw(ctrl_inw(CMT_CMSTR) & ~0x01, CMT_CMSTR); - return 0; -} - -static int cmt_timer_init(void) -{ - unsigned long interval; - - cmt_clock_enable(); - - setup_irq(CONFIG_SH_TIMER_IRQ, &cmt_irq); - - cmt0_clk.parent = clk_get(NULL, "module_clk"); - - cmt_timer_stop(); - - interval = cmt0_clk.parent->rate / 8 / HZ; - printk(KERN_INFO "Interval = %ld\n", interval); - - ctrl_outw(interval, CMT_CMCOR_0); - - clk_register(&cmt0_clk); - clk_enable(&cmt0_clk); - - cmt_timer_start(); - - return 0; -} - -static struct sys_timer_ops cmt_timer_ops = { - .init = cmt_timer_init, - .start = cmt_timer_start, - .stop = cmt_timer_stop, -#ifndef CONFIG_GENERIC_TIME - .get_offset = cmt_timer_get_offset, -#endif -}; - -struct sys_timer cmt_timer = { - .name = "cmt", - .ops = &cmt_timer_ops, -}; diff --git a/arch/sh/kernel/timers/timer.c b/arch/sh/kernel/timers/timer.c index 4e7e747..f3bd141 100644 --- a/arch/sh/kernel/timers/timer.c +++ b/arch/sh/kernel/timers/timer.c @@ -20,9 +20,6 @@ static struct sys_timer *sys_timers[] = { #ifdef CONFIG_SH_MTU2 &mtu2_timer, #endif -#ifdef CONFIG_SH_CMT - &cmt_timer, -#endif NULL, }; -- cgit v0.10.2 From a25cbd045a2ffc42787d4dbcbb9c7118f5f42732 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Fri, 1 May 2009 14:45:46 +0900 Subject: clocksource: setup mult_orig in clocksource_enable() Setup clocksource mult_orig in clocksource_enable(). Clocksource drivers can save power by using keeping the device clock disabled while the clocksource is unused. In practice this means that the enable() and disable() callbacks perform clk_enable() and clk_disable(). The enable() callback may also use clk_get_rate() to get the clock rate from the clock framework. This information can then be used to calculate the shift and mult variables. Currently the mult_orig variable is setup from mult at registration time only. This is conflicting with the above case since the clock is disabled and the mult variable is not yet calculated at the time of registration. Moving the mult_orig setup code to clocksource_enable() allows us to both handle the common case with no enable() callback and the mult-changed-after-enable() case. [ Impact: allow dynamic clock source usage ] Signed-off-by: Magnus Damm LKML-Reference: <20090501054546.8193.10688.sendpatchset@rx1.opensource.se> Signed-off-by: Thomas Gleixner diff --git a/include/linux/clocksource.h b/include/linux/clocksource.h index 5a40d14..c56457c 100644 --- a/include/linux/clocksource.h +++ b/include/linux/clocksource.h @@ -288,7 +288,15 @@ static inline cycle_t clocksource_read(struct clocksource *cs) */ static inline int clocksource_enable(struct clocksource *cs) { - return cs->enable ? cs->enable(cs) : 0; + int ret = 0; + + if (cs->enable) + ret = cs->enable(cs); + + /* save mult_orig on enable */ + cs->mult_orig = cs->mult; + + return ret; } /** diff --git a/kernel/time/clocksource.c b/kernel/time/clocksource.c index ecfd7b5..80189f6 100644 --- a/kernel/time/clocksource.c +++ b/kernel/time/clocksource.c @@ -402,9 +402,6 @@ int clocksource_register(struct clocksource *c) unsigned long flags; int ret; - /* save mult_orig on registration */ - c->mult_orig = c->mult; - spin_lock_irqsave(&clocksource_lock, flags); ret = clocksource_enqueue(c); if (!ret) -- cgit v0.10.2 From 7d27558c4138ac6b3684dea35c2f4379b940a7dd Mon Sep 17 00:00:00 2001 From: john stultz Date: Fri, 1 May 2009 13:10:26 -0700 Subject: timekeeping: create arch_gettimeoffset infrastructure Some arches don't supply their own clocksource. This is mainly the case in architectures that get their inter-tick times by reading the counter on their interval timer. Since these timers wrap every tick, they're not really useful as clocksources. Wrapping them to act like one is possible but not very efficient. So we provide a callout these arches can implement for use with the jiffies clocksource to provide finer then tick granular time. [ Impact: ease the migration to generic time keeping ] Signed-off-by: John Stultz Signed-off-by: Andrew Morton Signed-off-by: Thomas Gleixner diff --git a/include/linux/time.h b/include/linux/time.h index 242f624..ea16c1a 100644 --- a/include/linux/time.h +++ b/include/linux/time.h @@ -113,6 +113,21 @@ struct timespec current_kernel_time(void); #define CURRENT_TIME (current_kernel_time()) #define CURRENT_TIME_SEC ((struct timespec) { get_seconds(), 0 }) +/* Some architectures do not supply their own clocksource. + * This is mainly the case in architectures that get their + * inter-tick times by reading the counter on their interval + * timer. Since these timers wrap every tick, they're not really + * useful as clocksources. Wrapping them to act like one is possible + * but not very efficient. So we provide a callout these arches + * can implement for use with the jiffies clocksource to provide + * finer then tick granular time. + */ +#ifdef CONFIG_ARCH_USES_GETTIMEOFFSET +extern u32 arch_gettimeoffset(void); +#else +static inline u32 arch_gettimeoffset(void) { return 0; } +#endif + extern void do_gettimeofday(struct timeval *tv); extern int do_settimeofday(struct timespec *tv); extern int do_sys_settimeofday(struct timespec *tv, struct timezone *tz); diff --git a/kernel/time/timekeeping.c b/kernel/time/timekeeping.c index 687dff4..e97c50f 100644 --- a/kernel/time/timekeeping.c +++ b/kernel/time/timekeeping.c @@ -77,6 +77,10 @@ static void clocksource_forward_now(void) clock->cycle_last = cycle_now; nsec = cyc2ns(clock, cycle_delta); + + /* If arch requires, add in gettimeoffset() */ + nsec += arch_gettimeoffset(); + timespec_add_ns(&xtime, nsec); nsec = ((s64)cycle_delta * clock->mult_orig) >> clock->shift; @@ -111,6 +115,9 @@ void getnstimeofday(struct timespec *ts) /* convert to nanoseconds: */ nsecs = cyc2ns(clock, cycle_delta); + /* If arch requires, add in gettimeoffset() */ + nsecs += arch_gettimeoffset(); + } while (read_seqretry(&xtime_lock, seq)); timespec_add_ns(ts, nsecs); -- cgit v0.10.2 From 0cd5f7b0c7fd96f9f00187ef2ad2328de28ae326 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Sat, 2 May 2009 20:00:44 +0000 Subject: sh: remove obsolete no_irq_type Impact: cleanup convert the last remaining users to no_irq_chip Signed-off-by: Thomas Gleixner Signed-off-by: Paul Mundt diff --git a/arch/sh/kernel/sh_ksyms_32.c b/arch/sh/kernel/sh_ksyms_32.c index 528de29..2d868c6 100644 --- a/arch/sh/kernel/sh_ksyms_32.c +++ b/arch/sh/kernel/sh_ksyms_32.c @@ -19,13 +19,12 @@ #include extern int dump_fpu(struct pt_regs *, elf_fpregset_t *); -extern struct hw_interrupt_type no_irq_type; /* platform dependent support */ EXPORT_SYMBOL(dump_fpu); EXPORT_SYMBOL(kernel_thread); EXPORT_SYMBOL(irq_desc); -EXPORT_SYMBOL(no_irq_type); +EXPORT_SYMBOL(no_irq_chip); EXPORT_SYMBOL(strlen); -- cgit v0.10.2 From d80498398276ca8eee7ebdbe0d47e06d01317439 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Sat, 2 May 2009 20:01:20 +0000 Subject: sh: remove obsolete hw_interrupt_type Impact: cleanup Convert the last remaining users to struct irq_chip and remove the define. Signed-off-by: Thomas Gleixner Signed-off-by: Paul Mundt diff --git a/arch/sh/kernel/cpu/irq/imask.c b/arch/sh/kernel/cpu/irq/imask.c index 301b505..f43753b 100644 --- a/arch/sh/kernel/cpu/irq/imask.c +++ b/arch/sh/kernel/cpu/irq/imask.c @@ -39,7 +39,7 @@ static unsigned int startup_imask_irq(unsigned int irq) return 0; /* never anything pending */ } -static struct hw_interrupt_type imask_irq_type = { +static struct irq_chip imask_irq_type = { .typename = "SR.IMASK", .startup = startup_imask_irq, .shutdown = shutdown_imask_irq, diff --git a/arch/sh/kernel/cpu/irq/intc-sh5.c b/arch/sh/kernel/cpu/irq/intc-sh5.c index 726f033..d8679a4 100644 --- a/arch/sh/kernel/cpu/irq/intc-sh5.c +++ b/arch/sh/kernel/cpu/irq/intc-sh5.c @@ -84,7 +84,7 @@ static void disable_intc_irq(unsigned int irq); static void mask_and_ack_intc(unsigned int); static void end_intc_irq(unsigned int irq); -static struct hw_interrupt_type intc_irq_type = { +static struct irq_chip intc_irq_type = { .typename = "INTC", .startup = startup_intc_irq, .shutdown = shutdown_intc_irq, -- cgit v0.10.2 From 7563431107f6debf57c1dbecfb9498cf31a1c036 Mon Sep 17 00:00:00 2001 From: john stultz Date: Fri, 1 May 2009 13:10:28 -0700 Subject: time: sh: convert to use arch_getoffset() infrastructure Convert sh to use GENERIC_TIME via the arch_getoffset() infrastructure. Signed-off-by: John Stultz Signed-off-by: Andrew Morton Signed-off-by: Paul Mundt diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig index 7e96ade..6f91478 100644 --- a/arch/sh/Kconfig +++ b/arch/sh/Kconfig @@ -75,7 +75,7 @@ config GENERIC_IOMAP bool config GENERIC_TIME - def_bool n + def_bool y config GENERIC_CLOCKEVENTS def_bool n diff --git a/arch/sh/include/asm/timer.h b/arch/sh/include/asm/timer.h index 8f80a55..9c968d1 100644 --- a/arch/sh/include/asm/timer.h +++ b/arch/sh/include/asm/timer.h @@ -9,7 +9,7 @@ struct sys_timer_ops { int (*init)(void); int (*start)(void); int (*stop)(void); -#ifndef CONFIG_GENERIC_TIME +#ifdef CONFIG_ARCH_USES_GETTIMEOFFSET unsigned long (*get_offset)(void); #endif }; @@ -26,7 +26,7 @@ struct sys_timer { extern struct sys_timer tmu_timer, mtu2_timer; extern struct sys_timer *sys_timer; -#ifndef CONFIG_GENERIC_TIME +#ifdef CONFIG_ARCH_USES_GETTIMEOFFSET static inline unsigned long get_timer_offset(void) { return sys_timer->ops->get_offset(); diff --git a/arch/sh/kernel/time_32.c b/arch/sh/kernel/time_32.c index 4573321..9d34dff 100644 --- a/arch/sh/kernel/time_32.c +++ b/arch/sh/kernel/time_32.c @@ -83,65 +83,12 @@ static int __init rtc_generic_init(void) } module_init(rtc_generic_init); -#ifndef CONFIG_GENERIC_TIME -void do_gettimeofday(struct timeval *tv) +#ifdef CONFIG_ARCH_USES_GETTIMEOFFSET +u32 arch_gettimeoffset(void) { - unsigned long flags; - unsigned long seq; - unsigned long usec, sec; - - do { - /* - * Turn off IRQs when grabbing xtime_lock, so that - * the sys_timer get_offset code doesn't have to handle it. - */ - seq = read_seqbegin_irqsave(&xtime_lock, flags); - usec = get_timer_offset(); - sec = xtime.tv_sec; - usec += xtime.tv_nsec / NSEC_PER_USEC; - } while (read_seqretry_irqrestore(&xtime_lock, seq, flags)); - - while (usec >= 1000000) { - usec -= 1000000; - sec++; - } - - tv->tv_sec = sec; - tv->tv_usec = usec; -} -EXPORT_SYMBOL(do_gettimeofday); - -int do_settimeofday(struct timespec *tv) -{ - time_t wtm_sec, sec = tv->tv_sec; - long wtm_nsec, nsec = tv->tv_nsec; - - if ((unsigned long)tv->tv_nsec >= NSEC_PER_SEC) - return -EINVAL; - - write_seqlock_irq(&xtime_lock); - /* - * This is revolting. We need to set "xtime" correctly. However, the - * value in this location is the value at the most recent update of - * wall time. Discover what correction gettimeofday() would have - * made, and then undo it! - */ - nsec -= get_timer_offset() * NSEC_PER_USEC; - - wtm_sec = wall_to_monotonic.tv_sec + (xtime.tv_sec - sec); - wtm_nsec = wall_to_monotonic.tv_nsec + (xtime.tv_nsec - nsec); - - set_normalized_timespec(&xtime, sec, nsec); - set_normalized_timespec(&wall_to_monotonic, wtm_sec, wtm_nsec); - - ntp_clear(); - write_sequnlock_irq(&xtime_lock); - clock_was_set(); - - return 0; + return get_timer_offset() * 1000; } -EXPORT_SYMBOL(do_settimeofday); -#endif /* !CONFIG_GENERIC_TIME */ +#endif /* CONFIG_ARCH_USES_GETTIMEOFFSET */ /* last time the RTC clock got updated */ static long last_rtc_update; @@ -238,7 +185,7 @@ struct clocksource clocksource_sh = { .name = "SuperH", }; -#ifdef CONFIG_GENERIC_TIME +#ifndef CONFIG_ARCH_USES_GETTIMEOFFSET unsigned long long sched_clock(void) { unsigned long long cycles; diff --git a/arch/sh/kernel/time_64.c b/arch/sh/kernel/time_64.c index 988c77c..f4f5e8a 100644 --- a/arch/sh/kernel/time_64.c +++ b/arch/sh/kernel/time_64.c @@ -144,59 +144,10 @@ static unsigned long usecs_since_tick(void) return result; } -void do_gettimeofday(struct timeval *tv) +u32 arch_gettimeoffset(void) { - unsigned long flags; - unsigned long seq; - unsigned long usec, sec; - - do { - seq = read_seqbegin_irqsave(&xtime_lock, flags); - usec = usecs_since_tick(); - sec = xtime.tv_sec; - usec += xtime.tv_nsec / 1000; - } while (read_seqretry_irqrestore(&xtime_lock, seq, flags)); - - while (usec >= 1000000) { - usec -= 1000000; - sec++; - } - - tv->tv_sec = sec; - tv->tv_usec = usec; -} -EXPORT_SYMBOL(do_gettimeofday); - -int do_settimeofday(struct timespec *tv) -{ - time_t wtm_sec, sec = tv->tv_sec; - long wtm_nsec, nsec = tv->tv_nsec; - - if ((unsigned long)tv->tv_nsec >= NSEC_PER_SEC) - return -EINVAL; - - write_seqlock_irq(&xtime_lock); - /* - * This is revolting. We need to set "xtime" correctly. However, the - * value in this location is the value at the most recent update of - * wall time. Discover what correction gettimeofday() would have - * made, and then undo it! - */ - nsec -= 1000 * usecs_since_tick(); - - wtm_sec = wall_to_monotonic.tv_sec + (xtime.tv_sec - sec); - wtm_nsec = wall_to_monotonic.tv_nsec + (xtime.tv_nsec - nsec); - - set_normalized_timespec(&xtime, sec, nsec); - set_normalized_timespec(&wall_to_monotonic, wtm_sec, wtm_nsec); - - ntp_clear(); - write_sequnlock_irq(&xtime_lock); - clock_was_set(); - - return 0; + return usecs_since_tick() * 1000; } -EXPORT_SYMBOL(do_settimeofday); /* Dummy RTC ops */ static void null_rtc_get_time(struct timespec *tv) diff --git a/arch/sh/kernel/timers/timer-mtu2.c b/arch/sh/kernel/timers/timer-mtu2.c index 9b0ef01..8a1dcc2 100644 --- a/arch/sh/kernel/timers/timer-mtu2.c +++ b/arch/sh/kernel/timers/timer-mtu2.c @@ -191,7 +191,7 @@ struct sys_timer_ops mtu2_timer_ops = { .init = mtu2_timer_init, .start = mtu2_timer_start, .stop = mtu2_timer_stop, -#ifndef CONFIG_GENERIC_TIME +#ifdef CONFIG_ARCH_USES_GETTIMEOFFSET .get_offset = mtu2_timer_get_offset, #endif }; -- cgit v0.10.2 From d5ed4c2e5ce9f5f6fd6a5a39ee1196a1f8a46eed Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Thu, 30 Apr 2009 07:02:49 +0000 Subject: clocksource: SuperH MTU2 Timer driver This patch adds a MTU2 driver for the SuperH architecture. The MTU2 driver is a platform driver with early platform support to allow using a MTU2 channel as only clockevent during system bootup. Clocksource on sh2a is currently unsupported due to code generation issues with 64-bit math, so at this point only periodic clockevent support is in place. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig index 6f91478..6d0dd37 100644 --- a/arch/sh/Kconfig +++ b/arch/sh/Kconfig @@ -113,6 +113,9 @@ config SYS_SUPPORTS_PCI config SYS_SUPPORTS_CMT bool +config SYS_SUPPORTS_MTU2 + bool + config STACKTRACE_SUPPORT def_bool y @@ -478,6 +481,14 @@ config SH_MTU2 help This enables the use of the MTU2 as the system timer. +config SH_TIMER_MTU2 + bool "MTU2 timer driver" + depends on SYS_SUPPORTS_MTU2 && !SH_MTU2 + default y + select GENERIC_CLOCKEVENTS + help + This enables build of the MTU2 timer driver. + config SH_TIMER_IRQ int default "28" if CPU_SUBTYPE_SH7780 || CPU_SUBTYPE_SH7785 || \ diff --git a/drivers/clocksource/Makefile b/drivers/clocksource/Makefile index 1efb287..9785586 100644 --- a/drivers/clocksource/Makefile +++ b/drivers/clocksource/Makefile @@ -3,3 +3,4 @@ obj-$(CONFIG_X86_CYCLONE_TIMER) += cyclone.o obj-$(CONFIG_X86_PM_TIMER) += acpi_pm.o obj-$(CONFIG_SCx200HR_TIMER) += scx200_hrt.o obj-$(CONFIG_SH_TIMER_CMT) += sh_cmt.o +obj-$(CONFIG_SH_TIMER_MTU2) += sh_mtu2.o diff --git a/drivers/clocksource/sh_mtu2.c b/drivers/clocksource/sh_mtu2.c new file mode 100644 index 0000000..420566f --- /dev/null +++ b/drivers/clocksource/sh_mtu2.c @@ -0,0 +1,357 @@ +/* + * SuperH Timer Support - MTU2 + * + * Copyright (C) 2009 Magnus Damm + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +struct sh_mtu2_priv { + void __iomem *mapbase; + struct clk *clk; + struct irqaction irqaction; + struct platform_device *pdev; + unsigned long rate; + unsigned long periodic; + struct clock_event_device ced; +}; + +static DEFINE_SPINLOCK(sh_mtu2_lock); + +#define TSTR -1 /* shared register */ +#define TCR 0 /* channel register */ +#define TMDR 1 /* channel register */ +#define TIOR 2 /* channel register */ +#define TIER 3 /* channel register */ +#define TSR 4 /* channel register */ +#define TCNT 5 /* channel register */ +#define TGR 6 /* channel register */ + +static unsigned long mtu2_reg_offs[] = { + [TCR] = 0, + [TMDR] = 1, + [TIOR] = 2, + [TIER] = 4, + [TSR] = 5, + [TCNT] = 6, + [TGR] = 8, +}; + +static inline unsigned long sh_mtu2_read(struct sh_mtu2_priv *p, int reg_nr) +{ + struct sh_mtu2_config *cfg = p->pdev->dev.platform_data; + void __iomem *base = p->mapbase; + unsigned long offs; + + if (reg_nr == TSTR) + return ioread8(base + cfg->channel_offset); + + offs = mtu2_reg_offs[reg_nr]; + + if ((reg_nr == TCNT) || (reg_nr == TGR)) + return ioread16(base + offs); + else + return ioread8(base + offs); +} + +static inline void sh_mtu2_write(struct sh_mtu2_priv *p, int reg_nr, + unsigned long value) +{ + struct sh_mtu2_config *cfg = p->pdev->dev.platform_data; + void __iomem *base = p->mapbase; + unsigned long offs; + + if (reg_nr == TSTR) { + iowrite8(value, base + cfg->channel_offset); + return; + } + + offs = mtu2_reg_offs[reg_nr]; + + if ((reg_nr == TCNT) || (reg_nr == TGR)) + iowrite16(value, base + offs); + else + iowrite8(value, base + offs); +} + +static void sh_mtu2_start_stop_ch(struct sh_mtu2_priv *p, int start) +{ + struct sh_mtu2_config *cfg = p->pdev->dev.platform_data; + unsigned long flags, value; + + /* start stop register shared by multiple timer channels */ + spin_lock_irqsave(&sh_mtu2_lock, flags); + value = sh_mtu2_read(p, TSTR); + + if (start) + value |= 1 << cfg->timer_bit; + else + value &= ~(1 << cfg->timer_bit); + + sh_mtu2_write(p, TSTR, value); + spin_unlock_irqrestore(&sh_mtu2_lock, flags); +} + +static int sh_mtu2_enable(struct sh_mtu2_priv *p) +{ + struct sh_mtu2_config *cfg = p->pdev->dev.platform_data; + int ret; + + /* enable clock */ + ret = clk_enable(p->clk); + if (ret) { + pr_err("sh_mtu2: cannot enable clock \"%s\"\n", cfg->clk); + return ret; + } + + /* make sure channel is disabled */ + sh_mtu2_start_stop_ch(p, 0); + + p->rate = clk_get_rate(p->clk) / 64; + p->periodic = (p->rate + HZ/2) / HZ; + + /* "Periodic Counter Operation" */ + sh_mtu2_write(p, TCR, 0x23); /* TGRA clear, divide clock by 64 */ + sh_mtu2_write(p, TIOR, 0); + sh_mtu2_write(p, TGR, p->periodic); + sh_mtu2_write(p, TCNT, 0); + sh_mtu2_write(p, TMDR, 0); + sh_mtu2_write(p, TIER, 0x01); + + /* enable channel */ + sh_mtu2_start_stop_ch(p, 1); + + return 0; +} + +static void sh_mtu2_disable(struct sh_mtu2_priv *p) +{ + /* disable channel */ + sh_mtu2_start_stop_ch(p, 0); + + /* stop clock */ + clk_disable(p->clk); +} + +static irqreturn_t sh_mtu2_interrupt(int irq, void *dev_id) +{ + struct sh_mtu2_priv *p = dev_id; + + /* acknowledge interrupt */ + sh_mtu2_read(p, TSR); + sh_mtu2_write(p, TSR, 0xfe); + + /* notify clockevent layer */ + p->ced.event_handler(&p->ced); + return IRQ_HANDLED; +} + +static struct sh_mtu2_priv *ced_to_sh_mtu2(struct clock_event_device *ced) +{ + return container_of(ced, struct sh_mtu2_priv, ced); +} + +static void sh_mtu2_clock_event_mode(enum clock_event_mode mode, + struct clock_event_device *ced) +{ + struct sh_mtu2_priv *p = ced_to_sh_mtu2(ced); + int disabled = 0; + + /* deal with old setting first */ + switch (ced->mode) { + case CLOCK_EVT_MODE_PERIODIC: + sh_mtu2_disable(p); + disabled = 1; + break; + default: + break; + } + + switch (mode) { + case CLOCK_EVT_MODE_PERIODIC: + pr_info("sh_mtu2: %s used for periodic clock events\n", + ced->name); + sh_mtu2_enable(p); + break; + case CLOCK_EVT_MODE_UNUSED: + if (!disabled) + sh_mtu2_disable(p); + break; + case CLOCK_EVT_MODE_SHUTDOWN: + default: + break; + } +} + +static void sh_mtu2_register_clockevent(struct sh_mtu2_priv *p, + char *name, unsigned long rating) +{ + struct clock_event_device *ced = &p->ced; + int ret; + + memset(ced, 0, sizeof(*ced)); + + ced->name = name; + ced->features = CLOCK_EVT_FEAT_PERIODIC; + ced->rating = rating; + ced->cpumask = cpumask_of(0); + ced->set_mode = sh_mtu2_clock_event_mode; + + ret = setup_irq(p->irqaction.irq, &p->irqaction); + if (ret) { + pr_err("sh_mtu2: failed to request irq %d\n", + p->irqaction.irq); + return; + } + + pr_info("sh_mtu2: %s used for clock events\n", ced->name); + clockevents_register_device(ced); +} + +int sh_mtu2_register(struct sh_mtu2_priv *p, char *name, + unsigned long clockevent_rating) +{ + if (clockevent_rating) + sh_mtu2_register_clockevent(p, name, clockevent_rating); + + return 0; +} + +static int sh_mtu2_setup(struct sh_mtu2_priv *p, struct platform_device *pdev) +{ + struct sh_mtu2_config *cfg = pdev->dev.platform_data; + struct resource *res; + int irq, ret; + ret = -ENXIO; + + memset(p, 0, sizeof(*p)); + p->pdev = pdev; + + if (!cfg) { + dev_err(&p->pdev->dev, "missing platform data\n"); + goto err0; + } + + platform_set_drvdata(pdev, p); + + res = platform_get_resource(p->pdev, IORESOURCE_MEM, 0); + if (!res) { + dev_err(&p->pdev->dev, "failed to get I/O memory\n"); + goto err0; + } + + irq = platform_get_irq(p->pdev, 0); + if (irq < 0) { + dev_err(&p->pdev->dev, "failed to get irq\n"); + goto err0; + } + + /* map memory, let mapbase point to our channel */ + p->mapbase = ioremap_nocache(res->start, resource_size(res)); + if (p->mapbase == NULL) { + pr_err("sh_mtu2: failed to remap I/O memory\n"); + goto err0; + } + + /* setup data for setup_irq() (too early for request_irq()) */ + p->irqaction.name = cfg->name; + p->irqaction.handler = sh_mtu2_interrupt; + p->irqaction.dev_id = p; + p->irqaction.irq = irq; + p->irqaction.flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL; + p->irqaction.mask = CPU_MASK_NONE; + + /* get hold of clock */ + p->clk = clk_get(&p->pdev->dev, cfg->clk); + if (IS_ERR(p->clk)) { + pr_err("sh_mtu2: cannot get clock \"%s\"\n", cfg->clk); + ret = PTR_ERR(p->clk); + goto err1; + } + + return sh_mtu2_register(p, cfg->name, cfg->clockevent_rating); + err1: + iounmap(p->mapbase); + err0: + return ret; +} + +static int __devinit sh_mtu2_probe(struct platform_device *pdev) +{ + struct sh_mtu2_priv *p = platform_get_drvdata(pdev); + struct sh_mtu2_config *cfg = pdev->dev.platform_data; + int ret; + + if (p) { + pr_info("sh_mtu2: %s kept as earlytimer\n", cfg->name); + return 0; + } + + p = kmalloc(sizeof(*p), GFP_KERNEL); + if (p == NULL) { + dev_err(&pdev->dev, "failed to allocate driver data\n"); + return -ENOMEM; + } + + ret = sh_mtu2_setup(p, pdev); + if (ret) { + kfree(p); + platform_set_drvdata(pdev, NULL); + } + return ret; +} + +static int __devexit sh_mtu2_remove(struct platform_device *pdev) +{ + return -EBUSY; /* cannot unregister clockevent */ +} + +static struct platform_driver sh_mtu2_device_driver = { + .probe = sh_mtu2_probe, + .remove = __devexit_p(sh_mtu2_remove), + .driver = { + .name = "sh_mtu2", + } +}; + +static int __init sh_mtu2_init(void) +{ + return platform_driver_register(&sh_mtu2_device_driver); +} + +static void __exit sh_mtu2_exit(void) +{ + platform_driver_unregister(&sh_mtu2_device_driver); +} + +early_platform_init("earlytimer", &sh_mtu2_device_driver); +module_init(sh_mtu2_init); +module_exit(sh_mtu2_exit); + +MODULE_AUTHOR("Magnus Damm"); +MODULE_DESCRIPTION("SuperH MTU2 Timer Driver"); +MODULE_LICENSE("GPL v2"); diff --git a/include/linux/sh_mtu2.h b/include/linux/sh_mtu2.h new file mode 100644 index 0000000..a988763 --- /dev/null +++ b/include/linux/sh_mtu2.h @@ -0,0 +1,12 @@ +#ifndef __SH_MTU2_H__ +#define __SH_MTU2_H__ + +struct sh_mtu2_config { + char *name; + int channel_offset; + int timer_bit; + char *clk; + unsigned long clockevent_rating; +}; + +#endif /* __SH_MTU2_H__ */ -- cgit v0.10.2 From da107c6ef919b3afd9c9b405a4f71e03b5725b04 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Thu, 30 Apr 2009 07:06:26 +0000 Subject: sh: sh2a MTU2 platform data This patch adds MTU2 platform data for the following cpus: - sh7201 (3/5 channels) - sh7203/sh7263 (2/4 channels) - sh7206 (3/5 channels) - MXG (3/5 channels) Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig index 6d0dd37..2061488 100644 --- a/arch/sh/Kconfig +++ b/arch/sh/Kconfig @@ -214,27 +214,32 @@ config CPU_SUBTYPE_SH7201 bool "Support SH7201 processor" select CPU_SH2A select CPU_HAS_FPU + select SYS_SUPPORTS_MTU2 config CPU_SUBTYPE_SH7203 bool "Support SH7203 processor" select CPU_SH2A select CPU_HAS_FPU select SYS_SUPPORTS_CMT + select SYS_SUPPORTS_MTU2 config CPU_SUBTYPE_SH7206 bool "Support SH7206 processor" select CPU_SH2A select SYS_SUPPORTS_CMT + select SYS_SUPPORTS_MTU2 config CPU_SUBTYPE_SH7263 bool "Support SH7263 processor" select CPU_SH2A select CPU_HAS_FPU select SYS_SUPPORTS_CMT + select SYS_SUPPORTS_MTU2 config CPU_SUBTYPE_MXG bool "Support MX-G processor" select CPU_SH2A + select SYS_SUPPORTS_MTU2 help Select MX-G if running on an R8A03022BG part. diff --git a/arch/sh/kernel/cpu/sh2a/setup-mxg.c b/arch/sh/kernel/cpu/sh2a/setup-mxg.c index 8442937..870030a 100644 --- a/arch/sh/kernel/cpu/sh2a/setup-mxg.c +++ b/arch/sh/kernel/cpu/sh2a/setup-mxg.c @@ -11,6 +11,7 @@ #include #include #include +#include enum { UNUSED = 0, @@ -24,7 +25,7 @@ enum { SCIF0, SCIF1, - MTU2_GROUP1, MTU2_GROUP2, MTU2_GROUP3, MTU2_GROUP4, MTU2_GROUP5 + MTU2_GROUP1, MTU2_GROUP2, MTU2_GROUP3, MTU2_GROUP4, MTU2_GROUP5, MTU2_TGI3B, MTU2_TGI3C, /* interrupt groups */ @@ -113,6 +114,99 @@ static struct intc_mask_reg mask_registers[] __initdata = { static DECLARE_INTC_DESC(intc_desc, "mxg", vectors, groups, mask_registers, prio_registers, NULL); +static struct sh_mtu2_config mtu2_0_platform_data = { + .name = "MTU2_0", + .channel_offset = -0x80, + .timer_bit = 0, + .clk = "module_clk", + .clockevent_rating = 200, +}; + +static struct resource mtu2_0_resources[] = { + [0] = { + .name = "MTU2_0", + .start = 0xff801300, + .end = 0xff801326, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 228, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device mtu2_0_device = { + .name = "sh_mtu2", + .id = 0, + .dev = { + .platform_data = &mtu2_0_platform_data, + }, + .resource = mtu2_0_resources, + .num_resources = ARRAY_SIZE(mtu2_0_resources), +}; + +static struct sh_mtu2_config mtu2_1_platform_data = { + .name = "MTU2_1", + .channel_offset = -0x100, + .timer_bit = 1, + .clk = "module_clk", + .clockevent_rating = 200, +}; + +static struct resource mtu2_1_resources[] = { + [0] = { + .name = "MTU2_1", + .start = 0xff801380, + .end = 0xff801390, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 234, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device mtu2_1_device = { + .name = "sh_mtu2", + .id = 1, + .dev = { + .platform_data = &mtu2_1_platform_data, + }, + .resource = mtu2_1_resources, + .num_resources = ARRAY_SIZE(mtu2_1_resources), +}; + +static struct sh_mtu2_config mtu2_2_platform_data = { + .name = "MTU2_2", + .channel_offset = 0x80, + .timer_bit = 2, + .clk = "module_clk", + .clockevent_rating = 200, +}; + +static struct resource mtu2_2_resources[] = { + [0] = { + .name = "MTU2_2", + .start = 0xff801000, + .end = 0xff80100a, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 240, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device mtu2_2_device = { + .name = "sh_mtu2", + .id = 2, + .dev = { + .platform_data = &mtu2_2_platform_data, + }, + .resource = mtu2_2_resources, + .num_resources = ARRAY_SIZE(mtu2_2_resources), +}; + static struct plat_sci_port sci_platform_data[] = { { .mapbase = 0xff804000, @@ -134,6 +228,9 @@ static struct platform_device sci_device = { static struct platform_device *mxg_devices[] __initdata = { &sci_device, + &mtu2_0_device, + &mtu2_1_device, + &mtu2_2_device, }; static int __init mxg_devices_setup(void) @@ -147,3 +244,15 @@ void __init plat_irq_setup(void) { register_intc_controller(&intc_desc); } + +static struct platform_device *mxg_early_devices[] __initdata = { + &mtu2_0_device, + &mtu2_1_device, + &mtu2_2_device, +}; + +void __init plat_early_device_setup(void) +{ + early_platform_add_devices(mxg_early_devices, + ARRAY_SIZE(mxg_early_devices)); +} diff --git a/arch/sh/kernel/cpu/sh2a/setup-sh7201.c b/arch/sh/kernel/cpu/sh2a/setup-sh7201.c index 00f42f9..074aa90 100644 --- a/arch/sh/kernel/cpu/sh2a/setup-sh7201.c +++ b/arch/sh/kernel/cpu/sh2a/setup-sh7201.c @@ -12,6 +12,8 @@ #include #include #include +#include +#include enum { UNUSED = 0, @@ -249,9 +251,105 @@ static struct platform_device rtc_device = { .resource = rtc_resources, }; +static struct sh_mtu2_config mtu2_0_platform_data = { + .name = "MTU2_0", + .channel_offset = -0x80, + .timer_bit = 0, + .clk = "module_clk", + .clockevent_rating = 200, +}; + +static struct resource mtu2_0_resources[] = { + [0] = { + .name = "MTU2_0", + .start = 0xfffe4300, + .end = 0xfffe4326, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 108, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device mtu2_0_device = { + .name = "sh_mtu2", + .id = 0, + .dev = { + .platform_data = &mtu2_0_platform_data, + }, + .resource = mtu2_0_resources, + .num_resources = ARRAY_SIZE(mtu2_0_resources), +}; + +static struct sh_mtu2_config mtu2_1_platform_data = { + .name = "MTU2_1", + .channel_offset = -0x100, + .timer_bit = 1, + .clk = "module_clk", + .clockevent_rating = 200, +}; + +static struct resource mtu2_1_resources[] = { + [0] = { + .name = "MTU2_1", + .start = 0xfffe4380, + .end = 0xfffe4390, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 116, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device mtu2_1_device = { + .name = "sh_mtu2", + .id = 1, + .dev = { + .platform_data = &mtu2_1_platform_data, + }, + .resource = mtu2_1_resources, + .num_resources = ARRAY_SIZE(mtu2_1_resources), +}; + +static struct sh_mtu2_config mtu2_2_platform_data = { + .name = "MTU2_2", + .channel_offset = 0x80, + .timer_bit = 2, + .clk = "module_clk", + .clockevent_rating = 200, +}; + +static struct resource mtu2_2_resources[] = { + [0] = { + .name = "MTU2_2", + .start = 0xfffe4000, + .end = 0xfffe400a, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 124, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device mtu2_2_device = { + .name = "sh_mtu2", + .id = 2, + .dev = { + .platform_data = &mtu2_2_platform_data, + }, + .resource = mtu2_2_resources, + .num_resources = ARRAY_SIZE(mtu2_2_resources), +}; + static struct platform_device *sh7201_devices[] __initdata = { &sci_device, &rtc_device, + &mtu2_0_device, + &mtu2_1_device, + &mtu2_2_device, }; static int __init sh7201_devices_setup(void) @@ -265,3 +363,20 @@ void __init plat_irq_setup(void) { register_intc_controller(&intc_desc); } + +static struct platform_device *sh7201_early_devices[] __initdata = { + &mtu2_0_device, + &mtu2_1_device, + &mtu2_2_device, +}; + +#define STBCR3 0xfffe0408 + +void __init plat_early_device_setup(void) +{ + /* enable MTU2 clock */ + __raw_writeb(__raw_readb(STBCR3) & ~0x20, STBCR3); + + early_platform_add_devices(sh7201_early_devices, + ARRAY_SIZE(sh7201_early_devices)); +} diff --git a/arch/sh/kernel/cpu/sh2a/setup-sh7203.c b/arch/sh/kernel/cpu/sh2a/setup-sh7203.c index 0836ace..3448164 100644 --- a/arch/sh/kernel/cpu/sh2a/setup-sh7203.c +++ b/arch/sh/kernel/cpu/sh2a/setup-sh7203.c @@ -12,6 +12,7 @@ #include #include #include +#include #include enum { @@ -271,6 +272,68 @@ static struct platform_device cmt1_device = { .num_resources = ARRAY_SIZE(cmt1_resources), }; +static struct sh_mtu2_config mtu2_0_platform_data = { + .name = "MTU2_0", + .channel_offset = -0x80, + .timer_bit = 0, + .clk = "module_clk", + .clockevent_rating = 200, +}; + +static struct resource mtu2_0_resources[] = { + [0] = { + .name = "MTU2_0", + .start = 0xfffe4300, + .end = 0xfffe4326, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 146, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device mtu2_0_device = { + .name = "sh_mtu2", + .id = 0, + .dev = { + .platform_data = &mtu2_0_platform_data, + }, + .resource = mtu2_0_resources, + .num_resources = ARRAY_SIZE(mtu2_0_resources), +}; + +static struct sh_mtu2_config mtu2_1_platform_data = { + .name = "MTU2_1", + .channel_offset = -0x100, + .timer_bit = 1, + .clk = "module_clk", + .clockevent_rating = 200, +}; + +static struct resource mtu2_1_resources[] = { + [0] = { + .name = "MTU2_1", + .start = 0xfffe4380, + .end = 0xfffe4390, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 153, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device mtu2_1_device = { + .name = "sh_mtu2", + .id = 1, + .dev = { + .platform_data = &mtu2_1_platform_data, + }, + .resource = mtu2_1_resources, + .num_resources = ARRAY_SIZE(mtu2_1_resources), +}; + static struct resource rtc_resources[] = { [0] = { .start = 0xffff2000, @@ -295,6 +358,8 @@ static struct platform_device *sh7203_devices[] __initdata = { &sci_device, &cmt0_device, &cmt1_device, + &mtu2_0_device, + &mtu2_1_device, &rtc_device, }; @@ -313,8 +378,11 @@ void __init plat_irq_setup(void) static struct platform_device *sh7203_early_devices[] __initdata = { &cmt0_device, &cmt1_device, + &mtu2_0_device, + &mtu2_1_device, }; +#define STBCR3 0xfffe0408 #define STBCR4 0xfffe040c void __init plat_early_device_setup(void) @@ -322,6 +390,9 @@ void __init plat_early_device_setup(void) /* enable CMT clock */ __raw_writeb(__raw_readb(STBCR4) & ~0x04, STBCR4); + /* enable MTU2 clock */ + __raw_writeb(__raw_readb(STBCR3) & ~0x20, STBCR3); + early_platform_add_devices(sh7203_early_devices, ARRAY_SIZE(sh7203_early_devices)); } diff --git a/arch/sh/kernel/cpu/sh2a/setup-sh7206.c b/arch/sh/kernel/cpu/sh2a/setup-sh7206.c index f9606e3..e700559 100644 --- a/arch/sh/kernel/cpu/sh2a/setup-sh7206.c +++ b/arch/sh/kernel/cpu/sh2a/setup-sh7206.c @@ -13,6 +13,7 @@ #include #include #include +#include #include enum { @@ -231,10 +232,106 @@ static struct platform_device cmt1_device = { .num_resources = ARRAY_SIZE(cmt1_resources), }; +static struct sh_mtu2_config mtu2_0_platform_data = { + .name = "MTU2_0", + .channel_offset = -0x80, + .timer_bit = 0, + .clk = "module_clk", + .clockevent_rating = 200, +}; + +static struct resource mtu2_0_resources[] = { + [0] = { + .name = "MTU2_0", + .start = 0xfffe4300, + .end = 0xfffe4326, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 156, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device mtu2_0_device = { + .name = "sh_mtu2", + .id = 0, + .dev = { + .platform_data = &mtu2_0_platform_data, + }, + .resource = mtu2_0_resources, + .num_resources = ARRAY_SIZE(mtu2_0_resources), +}; + +static struct sh_mtu2_config mtu2_1_platform_data = { + .name = "MTU2_1", + .channel_offset = -0x100, + .timer_bit = 1, + .clk = "module_clk", + .clockevent_rating = 200, +}; + +static struct resource mtu2_1_resources[] = { + [0] = { + .name = "MTU2_1", + .start = 0xfffe4380, + .end = 0xfffe4390, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 164, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device mtu2_1_device = { + .name = "sh_mtu2", + .id = 1, + .dev = { + .platform_data = &mtu2_1_platform_data, + }, + .resource = mtu2_1_resources, + .num_resources = ARRAY_SIZE(mtu2_1_resources), +}; + +static struct sh_mtu2_config mtu2_2_platform_data = { + .name = "MTU2_2", + .channel_offset = 0x80, + .timer_bit = 2, + .clk = "module_clk", + .clockevent_rating = 200, +}; + +static struct resource mtu2_2_resources[] = { + [0] = { + .name = "MTU2_2", + .start = 0xfffe4000, + .end = 0xfffe400a, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 180, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device mtu2_2_device = { + .name = "sh_mtu2", + .id = 2, + .dev = { + .platform_data = &mtu2_2_platform_data, + }, + .resource = mtu2_2_resources, + .num_resources = ARRAY_SIZE(mtu2_2_resources), +}; + static struct platform_device *sh7206_devices[] __initdata = { &sci_device, &cmt0_device, &cmt1_device, + &mtu2_0_device, + &mtu2_1_device, + &mtu2_2_device, }; static int __init sh7206_devices_setup(void) @@ -252,8 +349,12 @@ void __init plat_irq_setup(void) static struct platform_device *sh7206_early_devices[] __initdata = { &cmt0_device, &cmt1_device, + &mtu2_0_device, + &mtu2_1_device, + &mtu2_2_device, }; +#define STBCR3 0xfffe0408 #define STBCR4 0xfffe040c void __init plat_early_device_setup(void) @@ -261,6 +362,9 @@ void __init plat_early_device_setup(void) /* enable CMT clock */ __raw_writeb(__raw_readb(STBCR4) & ~0x04, STBCR4); + /* enable MTU2 clock */ + __raw_writeb(__raw_readb(STBCR3) & ~0x20, STBCR3); + early_platform_add_devices(sh7206_early_devices, ARRAY_SIZE(sh7206_early_devices)); } -- cgit v0.10.2 From 3280c8865e1b738604bacdea54738acef31e8c12 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Thu, 30 Apr 2009 07:12:09 +0000 Subject: sh: remove old MTU2 driver This patch removes the old MTU2 driver (CONFIG_SH_MTU2/timer-mtu2.c) As replacement, select the sh_cmt driver with CONFIG_SH_TIMER_MTU2 and configure timer channel using platform data. If multiple MTU channels are enabled using platform data, use the earlytimer parameter on the kernel command line to select channel. For instance, use "earlytimer=sh_mtu2.0" to select the first channel. To verify which timer is being used, look at printouts or the timer irq count in /proc/interrupts. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig index 2061488..bda3dc1 100644 --- a/arch/sh/Kconfig +++ b/arch/sh/Kconfig @@ -479,16 +479,9 @@ config SH_TIMER_CMT help This enables build of the CMT timer driver. -config SH_MTU2 - bool "MTU2 timer support" - depends on CPU_SH2A && !GENERIC_TIME - default y - help - This enables the use of the MTU2 as the system timer. - config SH_TIMER_MTU2 bool "MTU2 timer driver" - depends on SYS_SUPPORTS_MTU2 && !SH_MTU2 + depends on SYS_SUPPORTS_MTU2 default y select GENERIC_CLOCKEVENTS help diff --git a/arch/sh/include/asm/timer.h b/arch/sh/include/asm/timer.h index 9c968d1..581e3fe 100644 --- a/arch/sh/include/asm/timer.h +++ b/arch/sh/include/asm/timer.h @@ -23,7 +23,7 @@ struct sys_timer { #define TICK_SIZE (tick_nsec / 1000) -extern struct sys_timer tmu_timer, mtu2_timer; +extern struct sys_timer tmu_timer; extern struct sys_timer *sys_timer; #ifdef CONFIG_ARCH_USES_GETTIMEOFFSET diff --git a/arch/sh/kernel/timers/Makefile b/arch/sh/kernel/timers/Makefile index 1e9a104..44156df 100644 --- a/arch/sh/kernel/timers/Makefile +++ b/arch/sh/kernel/timers/Makefile @@ -5,6 +5,5 @@ obj-y := timer.o obj-$(CONFIG_SH_TMU) += timer-tmu.o -obj-$(CONFIG_SH_MTU2) += timer-mtu2.o obj-$(CONFIG_GENERIC_CLOCKEVENTS_BROADCAST) += timer-broadcast.o diff --git a/arch/sh/kernel/timers/timer-mtu2.c b/arch/sh/kernel/timers/timer-mtu2.c deleted file mode 100644 index 8a1dcc2..0000000 --- a/arch/sh/kernel/timers/timer-mtu2.c +++ /dev/null @@ -1,202 +0,0 @@ -/* - * arch/sh/kernel/timers/timer-mtu2.c - MTU2 Timer Support - * - * Copyright (C) 2005 Paul Mundt - * - * Based off of arch/sh/kernel/timers/timer-tmu.c - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ -#include -#include -#include -#include -#include -#include -#include -#include - -/* - * We use channel 1 for our lowly system timer. Channel 2 would be the other - * likely candidate, but we leave it alone as it has higher divisors that - * would be of more use to other more interesting applications. - * - * TODO: Presently we only implement a 16-bit single-channel system timer. - * However, we can implement channel cascade if we go the overflow route and - * get away with using 2 MTU2 channels as a 32-bit timer. - */ -#define MTU2_TSTR 0xfffe4280 -#define MTU2_TCR_1 0xfffe4380 -#define MTU2_TMDR_1 0xfffe4381 -#define MTU2_TIOR_1 0xfffe4382 -#define MTU2_TIER_1 0xfffe4384 -#define MTU2_TSR_1 0xfffe4385 -#define MTU2_TCNT_1 0xfffe4386 /* 16-bit counter */ - -#if defined(CONFIG_CPU_SUBTYPE_SH7201) || \ - defined(CONFIG_CPU_SUBTYPE_SH7203) -#define MTU2_TGRA_1 0xfffe4388 -#else -#define MTU2_TGRA_1 0xfffe438a -#endif - -#define STBCR3 0xfffe0408 - -#define MTU2_TSTR_CST1 (1 << 1) /* Counter Start 1 */ - -#define MTU2_TSR_TGFA (1 << 0) /* GRA compare match */ - -#define MTU2_TIER_TGIEA (1 << 0) /* GRA compare match interrupt enable */ - -#define MTU2_TCR_INIT 0x22 - -#define MTU2_TCR_CALIB 0x00 - -static unsigned long mtu2_timer_get_offset(void) -{ - int count; - static int count_p = 0x7fff; /* for the first call after boot */ - static unsigned long jiffies_p = 0; - - /* - * cache volatile jiffies temporarily; we have IRQs turned off. - */ - unsigned long jiffies_t; - - /* timer count may underflow right here */ - count = ctrl_inw(MTU2_TCNT_1); /* read the latched count */ - - jiffies_t = jiffies; - - /* - * avoiding timer inconsistencies (they are rare, but they happen)... - * there is one kind of problem that must be avoided here: - * 1. the timer counter underflows - */ - - if (jiffies_t == jiffies_p) { - if (count > count_p) { - if (ctrl_inb(MTU2_TSR_1) & MTU2_TSR_TGFA) { - count -= LATCH; - } else { - printk("%s (): hardware timer problem?\n", - __func__); - } - } - } else - jiffies_p = jiffies_t; - - count_p = count; - - count = ((LATCH-1) - count) * TICK_SIZE; - count = (count + LATCH/2) / LATCH; - - return count; -} - -static irqreturn_t mtu2_timer_interrupt(int irq, void *dev_id) -{ - unsigned long timer_status; - - /* Clear TGFA bit */ - timer_status = ctrl_inb(MTU2_TSR_1); - timer_status &= ~MTU2_TSR_TGFA; - ctrl_outb(timer_status, MTU2_TSR_1); - - /* Do timer tick */ - handle_timer_tick(); - - return IRQ_HANDLED; -} - -static struct irqaction mtu2_irq = { - .name = "timer", - .handler = mtu2_timer_interrupt, - .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL, -}; - -static unsigned int divisors[] = { 1, 4, 16, 64, 1, 1, 256 }; - -static void mtu2_clk_init(struct clk *clk) -{ - u8 idx = MTU2_TCR_INIT & 0x7; - - clk->rate = clk->parent->rate / divisors[idx]; - /* Start TCNT counting */ - ctrl_outb(ctrl_inb(MTU2_TSTR) | MTU2_TSTR_CST1, MTU2_TSTR); - -} - -static void mtu2_clk_recalc(struct clk *clk) -{ - u8 idx = ctrl_inb(MTU2_TCR_1) & 0x7; - clk->rate = clk->parent->rate / divisors[idx]; -} - -static struct clk_ops mtu2_clk_ops = { - .init = mtu2_clk_init, - .recalc = mtu2_clk_recalc, -}; - -static struct clk mtu2_clk1 = { - .name = "mtu2_clk1", - .ops = &mtu2_clk_ops, -}; - -static int mtu2_timer_start(void) -{ - ctrl_outb(ctrl_inb(MTU2_TSTR) | MTU2_TSTR_CST1, MTU2_TSTR); - return 0; -} - -static int mtu2_timer_stop(void) -{ - ctrl_outb(ctrl_inb(MTU2_TSTR) & ~MTU2_TSTR_CST1, MTU2_TSTR); - return 0; -} - -static int mtu2_timer_init(void) -{ - unsigned long interval; - - setup_irq(CONFIG_SH_TIMER_IRQ, &mtu2_irq); - - mtu2_clk1.parent = clk_get(NULL, "module_clk"); - - ctrl_outb(ctrl_inb(STBCR3) & (~0x20), STBCR3); - - /* Normal operation */ - ctrl_outb(0, MTU2_TMDR_1); - ctrl_outb(MTU2_TCR_INIT, MTU2_TCR_1); - ctrl_outb(0x01, MTU2_TIOR_1); - - /* Enable underflow interrupt */ - ctrl_outb(ctrl_inb(MTU2_TIER_1) | MTU2_TIER_TGIEA, MTU2_TIER_1); - - interval = CONFIG_SH_PCLK_FREQ / 16 / HZ; - printk(KERN_INFO "Interval = %ld\n", interval); - - ctrl_outw(interval, MTU2_TGRA_1); - ctrl_outw(0, MTU2_TCNT_1); - - clk_register(&mtu2_clk1); - clk_enable(&mtu2_clk1); - - return 0; -} - -struct sys_timer_ops mtu2_timer_ops = { - .init = mtu2_timer_init, - .start = mtu2_timer_start, - .stop = mtu2_timer_stop, -#ifdef CONFIG_ARCH_USES_GETTIMEOFFSET - .get_offset = mtu2_timer_get_offset, -#endif -}; - -struct sys_timer mtu2_timer = { - .name = "mtu2", - .ops = &mtu2_timer_ops, -}; diff --git a/arch/sh/kernel/timers/timer.c b/arch/sh/kernel/timers/timer.c index f3bd141..920891a 100644 --- a/arch/sh/kernel/timers/timer.c +++ b/arch/sh/kernel/timers/timer.c @@ -17,9 +17,6 @@ static struct sys_timer *sys_timers[] = { #ifdef CONFIG_SH_TMU &tmu_timer, #endif -#ifdef CONFIG_SH_MTU2 - &mtu2_timer, -#endif NULL, }; -- cgit v0.10.2 From 9570ef20423b549757aa484ad388f9a7d5bdc4d9 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Fri, 1 May 2009 06:51:00 +0000 Subject: clocksource: SuperH TMU Timer driver This patch adds a TMU driver for the SuperH architecture. The TMU driver is a platform driver with early platform support to allow using a TMU channel as clockevent or clocksource during system bootup or later. Clocksource or clockevent can be selected. Both periodic and oneshot clockevents are supported. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig index bda3dc1..1f74737 100644 --- a/arch/sh/Kconfig +++ b/arch/sh/Kconfig @@ -116,6 +116,9 @@ config SYS_SUPPORTS_CMT config SYS_SUPPORTS_MTU2 bool +config SYS_SUPPORTS_TMU + bool + config STACKTRACE_SUPPORT def_bool y @@ -470,6 +473,15 @@ config SH_TMU help This enables the use of the TMU as the system timer. +config SH_TIMER_TMU + bool "TMU timer driver" + depends on !SH_TMU && SYS_SUPPORTS_TMU + default y + select GENERIC_TIME + select GENERIC_CLOCKEVENTS + help + This enables the build of the TMU timer driver. + config SH_TIMER_CMT bool "CMT timer driver" depends on SYS_SUPPORTS_CMT diff --git a/drivers/clocksource/Makefile b/drivers/clocksource/Makefile index 9785586..eef216f 100644 --- a/drivers/clocksource/Makefile +++ b/drivers/clocksource/Makefile @@ -4,3 +4,4 @@ obj-$(CONFIG_X86_PM_TIMER) += acpi_pm.o obj-$(CONFIG_SCx200HR_TIMER) += scx200_hrt.o obj-$(CONFIG_SH_TIMER_CMT) += sh_cmt.o obj-$(CONFIG_SH_TIMER_MTU2) += sh_mtu2.o +obj-$(CONFIG_SH_TIMER_TMU) += sh_tmu.o diff --git a/drivers/clocksource/sh_tmu.c b/drivers/clocksource/sh_tmu.c new file mode 100644 index 0000000..21bd77a --- /dev/null +++ b/drivers/clocksource/sh_tmu.c @@ -0,0 +1,461 @@ +/* + * SuperH Timer Support - TMU + * + * Copyright (C) 2009 Magnus Damm + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +struct sh_tmu_priv { + void __iomem *mapbase; + struct clk *clk; + struct irqaction irqaction; + struct platform_device *pdev; + unsigned long rate; + unsigned long periodic; + struct clock_event_device ced; + struct clocksource cs; +}; + +static DEFINE_SPINLOCK(sh_tmu_lock); + +#define TSTR -1 /* shared register */ +#define TCOR 0 /* channel register */ +#define TCNT 1 /* channel register */ +#define TCR 2 /* channel register */ + +static inline unsigned long sh_tmu_read(struct sh_tmu_priv *p, int reg_nr) +{ + struct sh_tmu_config *cfg = p->pdev->dev.platform_data; + void __iomem *base = p->mapbase; + unsigned long offs; + + if (reg_nr == TSTR) + return ioread8(base - cfg->channel_offset); + + offs = reg_nr << 2; + + if (reg_nr == TCR) + return ioread16(base + offs); + else + return ioread32(base + offs); +} + +static inline void sh_tmu_write(struct sh_tmu_priv *p, int reg_nr, + unsigned long value) +{ + struct sh_tmu_config *cfg = p->pdev->dev.platform_data; + void __iomem *base = p->mapbase; + unsigned long offs; + + if (reg_nr == TSTR) { + iowrite8(value, base - cfg->channel_offset); + return; + } + + offs = reg_nr << 2; + + if (reg_nr == TCR) + iowrite16(value, base + offs); + else + iowrite32(value, base + offs); +} + +static void sh_tmu_start_stop_ch(struct sh_tmu_priv *p, int start) +{ + struct sh_tmu_config *cfg = p->pdev->dev.platform_data; + unsigned long flags, value; + + /* start stop register shared by multiple timer channels */ + spin_lock_irqsave(&sh_tmu_lock, flags); + value = sh_tmu_read(p, TSTR); + + if (start) + value |= 1 << cfg->timer_bit; + else + value &= ~(1 << cfg->timer_bit); + + sh_tmu_write(p, TSTR, value); + spin_unlock_irqrestore(&sh_tmu_lock, flags); +} + +static int sh_tmu_enable(struct sh_tmu_priv *p) +{ + struct sh_tmu_config *cfg = p->pdev->dev.platform_data; + int ret; + + /* enable clock */ + ret = clk_enable(p->clk); + if (ret) { + pr_err("sh_tmu: cannot enable clock \"%s\"\n", cfg->clk); + return ret; + } + + /* make sure channel is disabled */ + sh_tmu_start_stop_ch(p, 0); + + /* maximum timeout */ + sh_tmu_write(p, TCOR, 0xffffffff); + sh_tmu_write(p, TCNT, 0xffffffff); + + /* configure channel to parent clock / 4, irq off */ + p->rate = clk_get_rate(p->clk) / 4; + sh_tmu_write(p, TCR, 0x0000); + + /* enable channel */ + sh_tmu_start_stop_ch(p, 1); + + return 0; +} + +static void sh_tmu_disable(struct sh_tmu_priv *p) +{ + /* disable channel */ + sh_tmu_start_stop_ch(p, 0); + + /* stop clock */ + clk_disable(p->clk); +} + +static void sh_tmu_set_next(struct sh_tmu_priv *p, unsigned long delta, + int periodic) +{ + /* stop timer */ + sh_tmu_start_stop_ch(p, 0); + + /* acknowledge interrupt */ + sh_tmu_read(p, TCR); + + /* enable interrupt */ + sh_tmu_write(p, TCR, 0x0020); + + /* reload delta value in case of periodic timer */ + if (periodic) + sh_tmu_write(p, TCOR, delta); + else + sh_tmu_write(p, TCOR, 0); + + sh_tmu_write(p, TCNT, delta); + + /* start timer */ + sh_tmu_start_stop_ch(p, 1); +} + +static irqreturn_t sh_tmu_interrupt(int irq, void *dev_id) +{ + struct sh_tmu_priv *p = dev_id; + + /* disable or acknowledge interrupt */ + if (p->ced.mode == CLOCK_EVT_MODE_ONESHOT) + sh_tmu_write(p, TCR, 0x0000); + else + sh_tmu_write(p, TCR, 0x0020); + + /* notify clockevent layer */ + p->ced.event_handler(&p->ced); + return IRQ_HANDLED; +} + +static struct sh_tmu_priv *cs_to_sh_tmu(struct clocksource *cs) +{ + return container_of(cs, struct sh_tmu_priv, cs); +} + +static cycle_t sh_tmu_clocksource_read(struct clocksource *cs) +{ + struct sh_tmu_priv *p = cs_to_sh_tmu(cs); + + return sh_tmu_read(p, TCNT) ^ 0xffffffff; +} + +static int sh_tmu_clocksource_enable(struct clocksource *cs) +{ + struct sh_tmu_priv *p = cs_to_sh_tmu(cs); + int ret; + + ret = sh_tmu_enable(p); + if (ret) + return ret; + + /* TODO: calculate good shift from rate and counter bit width */ + cs->shift = 10; + cs->mult = clocksource_hz2mult(p->rate, cs->shift); + return 0; +} + +static void sh_tmu_clocksource_disable(struct clocksource *cs) +{ + sh_tmu_disable(cs_to_sh_tmu(cs)); +} + +static int sh_tmu_register_clocksource(struct sh_tmu_priv *p, + char *name, unsigned long rating) +{ + struct clocksource *cs = &p->cs; + + cs->name = name; + cs->rating = rating; + cs->read = sh_tmu_clocksource_read; + cs->enable = sh_tmu_clocksource_enable; + cs->disable = sh_tmu_clocksource_disable; + cs->mask = CLOCKSOURCE_MASK(32); + cs->flags = CLOCK_SOURCE_IS_CONTINUOUS; + pr_info("sh_tmu: %s used as clock source\n", cs->name); + clocksource_register(cs); + return 0; +} + +static struct sh_tmu_priv *ced_to_sh_tmu(struct clock_event_device *ced) +{ + return container_of(ced, struct sh_tmu_priv, ced); +} + +static void sh_tmu_clock_event_start(struct sh_tmu_priv *p, int periodic) +{ + struct clock_event_device *ced = &p->ced; + + sh_tmu_enable(p); + + /* TODO: calculate good shift from rate and counter bit width */ + + ced->shift = 32; + ced->mult = div_sc(p->rate, NSEC_PER_SEC, ced->shift); + ced->max_delta_ns = clockevent_delta2ns(0xffffffff, ced); + ced->min_delta_ns = 5000; + + if (periodic) { + p->periodic = (p->rate + HZ/2) / HZ; + sh_tmu_set_next(p, p->periodic, 1); + } +} + +static void sh_tmu_clock_event_mode(enum clock_event_mode mode, + struct clock_event_device *ced) +{ + struct sh_tmu_priv *p = ced_to_sh_tmu(ced); + int disabled = 0; + + /* deal with old setting first */ + switch (ced->mode) { + case CLOCK_EVT_MODE_PERIODIC: + case CLOCK_EVT_MODE_ONESHOT: + sh_tmu_disable(p); + disabled = 1; + break; + default: + break; + } + + switch (mode) { + case CLOCK_EVT_MODE_PERIODIC: + pr_info("sh_tmu: %s used for periodic clock events\n", + ced->name); + sh_tmu_clock_event_start(p, 1); + break; + case CLOCK_EVT_MODE_ONESHOT: + pr_info("sh_tmu: %s used for oneshot clock events\n", + ced->name); + sh_tmu_clock_event_start(p, 0); + break; + case CLOCK_EVT_MODE_UNUSED: + if (!disabled) + sh_tmu_disable(p); + break; + case CLOCK_EVT_MODE_SHUTDOWN: + default: + break; + } +} + +static int sh_tmu_clock_event_next(unsigned long delta, + struct clock_event_device *ced) +{ + struct sh_tmu_priv *p = ced_to_sh_tmu(ced); + + BUG_ON(ced->mode != CLOCK_EVT_MODE_ONESHOT); + + /* program new delta value */ + sh_tmu_set_next(p, delta, 0); + return 0; +} + +static void sh_tmu_register_clockevent(struct sh_tmu_priv *p, + char *name, unsigned long rating) +{ + struct clock_event_device *ced = &p->ced; + int ret; + + memset(ced, 0, sizeof(*ced)); + + ced->name = name; + ced->features = CLOCK_EVT_FEAT_PERIODIC; + ced->features |= CLOCK_EVT_FEAT_ONESHOT; + ced->rating = rating; + ced->cpumask = cpumask_of(0); + ced->set_next_event = sh_tmu_clock_event_next; + ced->set_mode = sh_tmu_clock_event_mode; + + ret = setup_irq(p->irqaction.irq, &p->irqaction); + if (ret) { + pr_err("sh_tmu: failed to request irq %d\n", + p->irqaction.irq); + return; + } + + pr_info("sh_tmu: %s used for clock events\n", ced->name); + clockevents_register_device(ced); +} + +static int sh_tmu_register(struct sh_tmu_priv *p, char *name, + unsigned long clockevent_rating, + unsigned long clocksource_rating) +{ + if (clockevent_rating) + sh_tmu_register_clockevent(p, name, clockevent_rating); + else if (clocksource_rating) + sh_tmu_register_clocksource(p, name, clocksource_rating); + + return 0; +} + +static int sh_tmu_setup(struct sh_tmu_priv *p, struct platform_device *pdev) +{ + struct sh_tmu_config *cfg = pdev->dev.platform_data; + struct resource *res; + int irq, ret; + ret = -ENXIO; + + memset(p, 0, sizeof(*p)); + p->pdev = pdev; + + if (!cfg) { + dev_err(&p->pdev->dev, "missing platform data\n"); + goto err0; + } + + platform_set_drvdata(pdev, p); + + res = platform_get_resource(p->pdev, IORESOURCE_MEM, 0); + if (!res) { + dev_err(&p->pdev->dev, "failed to get I/O memory\n"); + goto err0; + } + + irq = platform_get_irq(p->pdev, 0); + if (irq < 0) { + dev_err(&p->pdev->dev, "failed to get irq\n"); + goto err0; + } + + /* map memory, let mapbase point to our channel */ + p->mapbase = ioremap_nocache(res->start, resource_size(res)); + if (p->mapbase == NULL) { + pr_err("sh_tmu: failed to remap I/O memory\n"); + goto err0; + } + + /* setup data for setup_irq() (too early for request_irq()) */ + p->irqaction.name = cfg->name; + p->irqaction.handler = sh_tmu_interrupt; + p->irqaction.dev_id = p; + p->irqaction.irq = irq; + p->irqaction.flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL; + p->irqaction.mask = CPU_MASK_NONE; + + /* get hold of clock */ + p->clk = clk_get(&p->pdev->dev, cfg->clk); + if (IS_ERR(p->clk)) { + pr_err("sh_tmu: cannot get clock \"%s\"\n", cfg->clk); + ret = PTR_ERR(p->clk); + goto err1; + } + + return sh_tmu_register(p, cfg->name, + cfg->clockevent_rating, + cfg->clocksource_rating); + err1: + iounmap(p->mapbase); + err0: + return ret; +} + +static int __devinit sh_tmu_probe(struct platform_device *pdev) +{ + struct sh_tmu_priv *p = platform_get_drvdata(pdev); + struct sh_tmu_config *cfg = pdev->dev.platform_data; + int ret; + + if (p) { + pr_info("sh_tmu: %s kept as earlytimer\n", cfg->name); + return 0; + } + + p = kmalloc(sizeof(*p), GFP_KERNEL); + if (p == NULL) { + dev_err(&pdev->dev, "failed to allocate driver data\n"); + return -ENOMEM; + } + + ret = sh_tmu_setup(p, pdev); + if (ret) { + kfree(p); + platform_set_drvdata(pdev, NULL); + } + return ret; +} + +static int __devexit sh_tmu_remove(struct platform_device *pdev) +{ + return -EBUSY; /* cannot unregister clockevent and clocksource */ +} + +static struct platform_driver sh_tmu_device_driver = { + .probe = sh_tmu_probe, + .remove = __devexit_p(sh_tmu_remove), + .driver = { + .name = "sh_tmu", + } +}; + +static int __init sh_tmu_init(void) +{ + return platform_driver_register(&sh_tmu_device_driver); +} + +static void __exit sh_tmu_exit(void) +{ + platform_driver_unregister(&sh_tmu_device_driver); +} + +early_platform_init("earlytimer", &sh_tmu_device_driver); +module_init(sh_tmu_init); +module_exit(sh_tmu_exit); + +MODULE_AUTHOR("Magnus Damm"); +MODULE_DESCRIPTION("SuperH TMU Timer Driver"); +MODULE_LICENSE("GPL v2"); diff --git a/include/linux/sh_tmu.h b/include/linux/sh_tmu.h new file mode 100644 index 0000000..b1195e8 --- /dev/null +++ b/include/linux/sh_tmu.h @@ -0,0 +1,13 @@ +#ifndef __SH_TMU_H__ +#define __SH_TMU_H__ + +struct sh_tmu_config { + char *name; + unsigned long channel_offset; + int timer_bit; + char *clk; + unsigned long clockevent_rating; + unsigned long clocksource_rating; +}; + +#endif /* __SH_TMU_H__ */ -- cgit v0.10.2 From d43a41bf8b504a1d9f0b4ce7e17d803f4ef39d84 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Fri, 1 May 2009 06:58:52 +0000 Subject: sh: TMU platform data for sh7722 This patch adds TMU platform data for sh7722. Only clockevent mode is enabled for now, clocksource requires this patch: "clocksource: setup mult_orig in clocksource_enable()" Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig index 1f74737..c3e9455 100644 --- a/arch/sh/Kconfig +++ b/arch/sh/Kconfig @@ -423,6 +423,7 @@ config CPU_SUBTYPE_SH7722 select ARCH_SPARSEMEM_ENABLE select SYS_SUPPORTS_NUMA select SYS_SUPPORTS_CMT + select SYS_SUPPORTS_TMU config CPU_SUBTYPE_SH7366 bool "Support SH7366 processor" diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7722.c b/arch/sh/kernel/cpu/sh4a/setup-sh7722.c index 793c50d..512735c 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7722.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7722.c @@ -14,6 +14,7 @@ #include #include #include +#include #include #include @@ -209,6 +210,98 @@ static struct platform_device cmt_device = { .num_resources = ARRAY_SIZE(cmt_resources), }; +static struct sh_tmu_config tmu0_platform_data = { + .name = "TMU0", + .channel_offset = 0x04, + .timer_bit = 0, + .clk = "tmu0", + .clockevent_rating = 200, +}; + +static struct resource tmu0_resources[] = { + [0] = { + .name = "TMU0", + .start = 0xffd80008, + .end = 0xffd80013, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 16, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device tmu0_device = { + .name = "sh_tmu", + .id = 0, + .dev = { + .platform_data = &tmu0_platform_data, + }, + .resource = tmu0_resources, + .num_resources = ARRAY_SIZE(tmu0_resources), +}; + +static struct sh_tmu_config tmu1_platform_data = { + .name = "TMU1", + .channel_offset = 0x10, + .timer_bit = 1, + .clk = "tmu0", + .clocksource_rating = 0, /* disabled for now */ +}; + +static struct resource tmu1_resources[] = { + [0] = { + .name = "TMU1", + .start = 0xffd80014, + .end = 0xffd8001f, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 17, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device tmu1_device = { + .name = "sh_tmu", + .id = 1, + .dev = { + .platform_data = &tmu1_platform_data, + }, + .resource = tmu1_resources, + .num_resources = ARRAY_SIZE(tmu1_resources), +}; + +static struct sh_tmu_config tmu2_platform_data = { + .name = "TMU2", + .channel_offset = 0x1c, + .timer_bit = 2, + .clk = "tmu0", +}; + +static struct resource tmu2_resources[] = { + [0] = { + .name = "TMU2", + .start = 0xffd80020, + .end = 0xffd8002b, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 18, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device tmu2_device = { + .name = "sh_tmu", + .id = 2, + .dev = { + .platform_data = &tmu2_platform_data, + }, + .resource = tmu2_resources, + .num_resources = ARRAY_SIZE(tmu2_resources), +}; + static struct plat_sci_port sci_platform_data[] = { { .mapbase = 0xffe00000, @@ -243,6 +336,9 @@ static struct platform_device sci_device = { static struct platform_device *sh7722_devices[] __initdata = { &cmt_device, + &tmu0_device, + &tmu1_device, + &tmu2_device, &rtc_device, &usbf_device, &iic_device, @@ -271,6 +367,9 @@ __initcall(sh7722_devices_setup); static struct platform_device *sh7722_early_devices[] __initdata = { &cmt_device, + &tmu0_device, + &tmu1_device, + &tmu2_device, }; void __init plat_early_device_setup(void) -- cgit v0.10.2 From 46a12f7426d71cabc08972cf8d3ffdd441d26a3a Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Sun, 3 May 2009 17:57:17 +0900 Subject: sh: Consolidate MTU2/CMT/TMU timer platform data. All of the SH timers use a roughly identical structure for platform data, which presently is broken out for each block. Consolidate all of these definitions, as there is no reason for them to be broken out in the first place. Signed-off-by: Paul Mundt diff --git a/arch/sh/kernel/cpu/sh2/setup-sh7619.c b/arch/sh/kernel/cpu/sh2/setup-sh7619.c index d70c263..94ac27f 100644 --- a/arch/sh/kernel/cpu/sh2/setup-sh7619.c +++ b/arch/sh/kernel/cpu/sh2/setup-sh7619.c @@ -12,7 +12,7 @@ #include #include #include -#include +#include #include enum { @@ -111,7 +111,7 @@ static struct platform_device eth_device = { .resource = eth_resources, }; -static struct sh_cmt_config cmt0_platform_data = { +static struct sh_timer_config cmt0_platform_data = { .name = "CMT0", .channel_offset = 0x02, .timer_bit = 0, @@ -143,7 +143,7 @@ static struct platform_device cmt0_device = { .num_resources = ARRAY_SIZE(cmt0_resources), }; -static struct sh_cmt_config cmt1_platform_data = { +static struct sh_timer_config cmt1_platform_data = { .name = "CMT1", .channel_offset = 0x08, .timer_bit = 1, diff --git a/arch/sh/kernel/cpu/sh2a/setup-mxg.c b/arch/sh/kernel/cpu/sh2a/setup-mxg.c index 870030a..a452d96 100644 --- a/arch/sh/kernel/cpu/sh2a/setup-mxg.c +++ b/arch/sh/kernel/cpu/sh2a/setup-mxg.c @@ -11,7 +11,7 @@ #include #include #include -#include +#include enum { UNUSED = 0, @@ -114,7 +114,7 @@ static struct intc_mask_reg mask_registers[] __initdata = { static DECLARE_INTC_DESC(intc_desc, "mxg", vectors, groups, mask_registers, prio_registers, NULL); -static struct sh_mtu2_config mtu2_0_platform_data = { +static struct sh_timer_config mtu2_0_platform_data = { .name = "MTU2_0", .channel_offset = -0x80, .timer_bit = 0, @@ -145,7 +145,7 @@ static struct platform_device mtu2_0_device = { .num_resources = ARRAY_SIZE(mtu2_0_resources), }; -static struct sh_mtu2_config mtu2_1_platform_data = { +static struct sh_timer_config mtu2_1_platform_data = { .name = "MTU2_1", .channel_offset = -0x100, .timer_bit = 1, @@ -176,7 +176,7 @@ static struct platform_device mtu2_1_device = { .num_resources = ARRAY_SIZE(mtu2_1_resources), }; -static struct sh_mtu2_config mtu2_2_platform_data = { +static struct sh_timer_config mtu2_2_platform_data = { .name = "MTU2_2", .channel_offset = 0x80, .timer_bit = 2, diff --git a/arch/sh/kernel/cpu/sh2a/setup-sh7201.c b/arch/sh/kernel/cpu/sh2a/setup-sh7201.c index 074aa90..772358b 100644 --- a/arch/sh/kernel/cpu/sh2a/setup-sh7201.c +++ b/arch/sh/kernel/cpu/sh2a/setup-sh7201.c @@ -12,7 +12,7 @@ #include #include #include -#include +#include #include enum { @@ -251,7 +251,7 @@ static struct platform_device rtc_device = { .resource = rtc_resources, }; -static struct sh_mtu2_config mtu2_0_platform_data = { +static struct sh_timer_config mtu2_0_platform_data = { .name = "MTU2_0", .channel_offset = -0x80, .timer_bit = 0, @@ -282,7 +282,7 @@ static struct platform_device mtu2_0_device = { .num_resources = ARRAY_SIZE(mtu2_0_resources), }; -static struct sh_mtu2_config mtu2_1_platform_data = { +static struct sh_timer_config mtu2_1_platform_data = { .name = "MTU2_1", .channel_offset = -0x100, .timer_bit = 1, @@ -313,7 +313,7 @@ static struct platform_device mtu2_1_device = { .num_resources = ARRAY_SIZE(mtu2_1_resources), }; -static struct sh_mtu2_config mtu2_2_platform_data = { +static struct sh_timer_config mtu2_2_platform_data = { .name = "MTU2_2", .channel_offset = 0x80, .timer_bit = 2, diff --git a/arch/sh/kernel/cpu/sh2a/setup-sh7203.c b/arch/sh/kernel/cpu/sh2a/setup-sh7203.c index 3448164..d749341 100644 --- a/arch/sh/kernel/cpu/sh2a/setup-sh7203.c +++ b/arch/sh/kernel/cpu/sh2a/setup-sh7203.c @@ -11,8 +11,7 @@ #include #include #include -#include -#include +#include #include enum { @@ -208,7 +207,7 @@ static struct platform_device sci_device = { }, }; -static struct sh_cmt_config cmt0_platform_data = { +static struct sh_timer_config cmt0_platform_data = { .name = "CMT0", .channel_offset = 0x02, .timer_bit = 0, @@ -240,7 +239,7 @@ static struct platform_device cmt0_device = { .num_resources = ARRAY_SIZE(cmt0_resources), }; -static struct sh_cmt_config cmt1_platform_data = { +static struct sh_timer_config cmt1_platform_data = { .name = "CMT1", .channel_offset = 0x08, .timer_bit = 1, @@ -272,7 +271,7 @@ static struct platform_device cmt1_device = { .num_resources = ARRAY_SIZE(cmt1_resources), }; -static struct sh_mtu2_config mtu2_0_platform_data = { +static struct sh_timer_config mtu2_0_platform_data = { .name = "MTU2_0", .channel_offset = -0x80, .timer_bit = 0, @@ -303,7 +302,7 @@ static struct platform_device mtu2_0_device = { .num_resources = ARRAY_SIZE(mtu2_0_resources), }; -static struct sh_mtu2_config mtu2_1_platform_data = { +static struct sh_timer_config mtu2_1_platform_data = { .name = "MTU2_1", .channel_offset = -0x100, .timer_bit = 1, diff --git a/arch/sh/kernel/cpu/sh2a/setup-sh7206.c b/arch/sh/kernel/cpu/sh2a/setup-sh7206.c index e700559..2fc6bff 100644 --- a/arch/sh/kernel/cpu/sh2a/setup-sh7206.c +++ b/arch/sh/kernel/cpu/sh2a/setup-sh7206.c @@ -12,8 +12,7 @@ #include #include #include -#include -#include +#include #include enum { @@ -168,7 +167,7 @@ static struct platform_device sci_device = { }, }; -static struct sh_cmt_config cmt0_platform_data = { +static struct sh_timer_config cmt0_platform_data = { .name = "CMT0", .channel_offset = 0x02, .timer_bit = 0, @@ -200,7 +199,7 @@ static struct platform_device cmt0_device = { .num_resources = ARRAY_SIZE(cmt0_resources), }; -static struct sh_cmt_config cmt1_platform_data = { +static struct sh_timer_config cmt1_platform_data = { .name = "CMT1", .channel_offset = 0x08, .timer_bit = 1, @@ -232,7 +231,7 @@ static struct platform_device cmt1_device = { .num_resources = ARRAY_SIZE(cmt1_resources), }; -static struct sh_mtu2_config mtu2_0_platform_data = { +static struct sh_timer_config mtu2_0_platform_data = { .name = "MTU2_0", .channel_offset = -0x80, .timer_bit = 0, @@ -263,7 +262,7 @@ static struct platform_device mtu2_0_device = { .num_resources = ARRAY_SIZE(mtu2_0_resources), }; -static struct sh_mtu2_config mtu2_1_platform_data = { +static struct sh_timer_config mtu2_1_platform_data = { .name = "MTU2_1", .channel_offset = -0x100, .timer_bit = 1, @@ -294,7 +293,7 @@ static struct platform_device mtu2_1_device = { .num_resources = ARRAY_SIZE(mtu2_1_resources), }; -static struct sh_mtu2_config mtu2_2_platform_data = { +static struct sh_timer_config mtu2_2_platform_data = { .name = "MTU2_2", .channel_offset = 0x80, .timer_bit = 2, diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7343.c b/arch/sh/kernel/cpu/sh4a/setup-sh7343.c index cb5b4db..f327b7e 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7343.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7343.c @@ -12,7 +12,7 @@ #include #include #include -#include +#include #include static struct resource iic0_resources[] = { @@ -141,7 +141,7 @@ static struct platform_device jpu_device = { .num_resources = ARRAY_SIZE(jpu_resources), }; -static struct sh_cmt_config cmt_platform_data = { +static struct sh_timer_config cmt_platform_data = { .name = "CMT", .channel_offset = 0x60, .timer_bit = 5, diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7366.c b/arch/sh/kernel/cpu/sh4a/setup-sh7366.c index 2a771f4..7361ea9 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7366.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7366.c @@ -14,7 +14,7 @@ #include #include #include -#include +#include #include static struct resource iic_resources[] = { @@ -148,7 +148,7 @@ static struct platform_device veu1_device = { .num_resources = ARRAY_SIZE(veu1_resources), }; -static struct sh_cmt_config cmt_platform_data = { +static struct sh_timer_config cmt_platform_data = { .name = "CMT", .channel_offset = 0x60, .timer_bit = 5, diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7722.c b/arch/sh/kernel/cpu/sh4a/setup-sh7722.c index 512735c..624e8e5 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7722.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7722.c @@ -13,8 +13,7 @@ #include #include #include -#include -#include +#include #include #include @@ -178,7 +177,7 @@ static struct platform_device jpu_device = { .num_resources = ARRAY_SIZE(jpu_resources), }; -static struct sh_cmt_config cmt_platform_data = { +static struct sh_timer_config cmt_platform_data = { .name = "CMT", .channel_offset = 0x60, .timer_bit = 5, @@ -210,7 +209,7 @@ static struct platform_device cmt_device = { .num_resources = ARRAY_SIZE(cmt_resources), }; -static struct sh_tmu_config tmu0_platform_data = { +static struct sh_timer_config tmu0_platform_data = { .name = "TMU0", .channel_offset = 0x04, .timer_bit = 0, @@ -241,7 +240,7 @@ static struct platform_device tmu0_device = { .num_resources = ARRAY_SIZE(tmu0_resources), }; -static struct sh_tmu_config tmu1_platform_data = { +static struct sh_timer_config tmu1_platform_data = { .name = "TMU1", .channel_offset = 0x10, .timer_bit = 1, @@ -272,7 +271,7 @@ static struct platform_device tmu1_device = { .num_resources = ARRAY_SIZE(tmu1_resources), }; -static struct sh_tmu_config tmu2_platform_data = { +static struct sh_timer_config tmu2_platform_data = { .name = "TMU2", .channel_offset = 0x1c, .timer_bit = 2, diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7723.c b/arch/sh/kernel/cpu/sh4a/setup-sh7723.c index dbb4494..fb9b542 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7723.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7723.c @@ -13,7 +13,7 @@ #include #include #include -#include +#include #include #include @@ -101,7 +101,7 @@ static struct platform_device veu1_device = { .num_resources = ARRAY_SIZE(veu1_resources), }; -static struct sh_cmt_config cmt_platform_data = { +static struct sh_timer_config cmt_platform_data = { .name = "CMT", .channel_offset = 0x60, .timer_bit = 5, diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7724.c b/arch/sh/kernel/cpu/sh4a/setup-sh7724.c index 8429396..e074951 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7724.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7724.c @@ -18,7 +18,7 @@ #include #include #include -#include +#include #include #include #include @@ -230,7 +230,7 @@ static struct platform_device veu1_device = { .num_resources = ARRAY_SIZE(veu1_resources), }; -static struct sh_cmt_config cmt_platform_data = { +static struct sh_timer_config cmt_platform_data = { .name = "CMT", .channel_offset = 0x60, .timer_bit = 5, diff --git a/drivers/clocksource/sh_cmt.c b/drivers/clocksource/sh_cmt.c index 4ff1508..aeb8c9b 100644 --- a/drivers/clocksource/sh_cmt.c +++ b/drivers/clocksource/sh_cmt.c @@ -28,7 +28,7 @@ #include #include #include -#include +#include struct sh_cmt_priv { void __iomem *mapbase; @@ -59,7 +59,7 @@ static DEFINE_SPINLOCK(sh_cmt_lock); static inline unsigned long sh_cmt_read(struct sh_cmt_priv *p, int reg_nr) { - struct sh_cmt_config *cfg = p->pdev->dev.platform_data; + struct sh_timer_config *cfg = p->pdev->dev.platform_data; void __iomem *base = p->mapbase; unsigned long offs; @@ -83,7 +83,7 @@ static inline unsigned long sh_cmt_read(struct sh_cmt_priv *p, int reg_nr) static inline void sh_cmt_write(struct sh_cmt_priv *p, int reg_nr, unsigned long value) { - struct sh_cmt_config *cfg = p->pdev->dev.platform_data; + struct sh_timer_config *cfg = p->pdev->dev.platform_data; void __iomem *base = p->mapbase; unsigned long offs; @@ -131,7 +131,7 @@ static unsigned long sh_cmt_get_counter(struct sh_cmt_priv *p, static void sh_cmt_start_stop_ch(struct sh_cmt_priv *p, int start) { - struct sh_cmt_config *cfg = p->pdev->dev.platform_data; + struct sh_timer_config *cfg = p->pdev->dev.platform_data; unsigned long flags, value; /* start stop register shared by multiple timer channels */ @@ -149,7 +149,7 @@ static void sh_cmt_start_stop_ch(struct sh_cmt_priv *p, int start) static int sh_cmt_enable(struct sh_cmt_priv *p, unsigned long *rate) { - struct sh_cmt_config *cfg = p->pdev->dev.platform_data; + struct sh_timer_config *cfg = p->pdev->dev.platform_data; int ret; /* enable clock */ @@ -560,7 +560,7 @@ int sh_cmt_register(struct sh_cmt_priv *p, char *name, static int sh_cmt_setup(struct sh_cmt_priv *p, struct platform_device *pdev) { - struct sh_cmt_config *cfg = pdev->dev.platform_data; + struct sh_timer_config *cfg = pdev->dev.platform_data; struct resource *res; int irq, ret; ret = -ENXIO; @@ -638,7 +638,7 @@ static int sh_cmt_setup(struct sh_cmt_priv *p, struct platform_device *pdev) static int __devinit sh_cmt_probe(struct platform_device *pdev) { struct sh_cmt_priv *p = platform_get_drvdata(pdev); - struct sh_cmt_config *cfg = pdev->dev.platform_data; + struct sh_timer_config *cfg = pdev->dev.platform_data; int ret; if (p) { diff --git a/drivers/clocksource/sh_mtu2.c b/drivers/clocksource/sh_mtu2.c index 420566f..ef02185 100644 --- a/drivers/clocksource/sh_mtu2.c +++ b/drivers/clocksource/sh_mtu2.c @@ -28,7 +28,7 @@ #include #include #include -#include +#include struct sh_mtu2_priv { void __iomem *mapbase; @@ -63,7 +63,7 @@ static unsigned long mtu2_reg_offs[] = { static inline unsigned long sh_mtu2_read(struct sh_mtu2_priv *p, int reg_nr) { - struct sh_mtu2_config *cfg = p->pdev->dev.platform_data; + struct sh_timer_config *cfg = p->pdev->dev.platform_data; void __iomem *base = p->mapbase; unsigned long offs; @@ -81,7 +81,7 @@ static inline unsigned long sh_mtu2_read(struct sh_mtu2_priv *p, int reg_nr) static inline void sh_mtu2_write(struct sh_mtu2_priv *p, int reg_nr, unsigned long value) { - struct sh_mtu2_config *cfg = p->pdev->dev.platform_data; + struct sh_timer_config *cfg = p->pdev->dev.platform_data; void __iomem *base = p->mapbase; unsigned long offs; @@ -100,7 +100,7 @@ static inline void sh_mtu2_write(struct sh_mtu2_priv *p, int reg_nr, static void sh_mtu2_start_stop_ch(struct sh_mtu2_priv *p, int start) { - struct sh_mtu2_config *cfg = p->pdev->dev.platform_data; + struct sh_timer_config *cfg = p->pdev->dev.platform_data; unsigned long flags, value; /* start stop register shared by multiple timer channels */ @@ -118,7 +118,7 @@ static void sh_mtu2_start_stop_ch(struct sh_mtu2_priv *p, int start) static int sh_mtu2_enable(struct sh_mtu2_priv *p) { - struct sh_mtu2_config *cfg = p->pdev->dev.platform_data; + struct sh_timer_config *cfg = p->pdev->dev.platform_data; int ret; /* enable clock */ @@ -243,7 +243,7 @@ int sh_mtu2_register(struct sh_mtu2_priv *p, char *name, static int sh_mtu2_setup(struct sh_mtu2_priv *p, struct platform_device *pdev) { - struct sh_mtu2_config *cfg = pdev->dev.platform_data; + struct sh_timer_config *cfg = pdev->dev.platform_data; struct resource *res; int irq, ret; ret = -ENXIO; @@ -303,7 +303,7 @@ static int sh_mtu2_setup(struct sh_mtu2_priv *p, struct platform_device *pdev) static int __devinit sh_mtu2_probe(struct platform_device *pdev) { struct sh_mtu2_priv *p = platform_get_drvdata(pdev); - struct sh_mtu2_config *cfg = pdev->dev.platform_data; + struct sh_timer_config *cfg = pdev->dev.platform_data; int ret; if (p) { diff --git a/drivers/clocksource/sh_tmu.c b/drivers/clocksource/sh_tmu.c index 21bd77a..d6ea439 100644 --- a/drivers/clocksource/sh_tmu.c +++ b/drivers/clocksource/sh_tmu.c @@ -29,7 +29,7 @@ #include #include #include -#include +#include struct sh_tmu_priv { void __iomem *mapbase; @@ -51,7 +51,7 @@ static DEFINE_SPINLOCK(sh_tmu_lock); static inline unsigned long sh_tmu_read(struct sh_tmu_priv *p, int reg_nr) { - struct sh_tmu_config *cfg = p->pdev->dev.platform_data; + struct sh_timer_config *cfg = p->pdev->dev.platform_data; void __iomem *base = p->mapbase; unsigned long offs; @@ -69,7 +69,7 @@ static inline unsigned long sh_tmu_read(struct sh_tmu_priv *p, int reg_nr) static inline void sh_tmu_write(struct sh_tmu_priv *p, int reg_nr, unsigned long value) { - struct sh_tmu_config *cfg = p->pdev->dev.platform_data; + struct sh_timer_config *cfg = p->pdev->dev.platform_data; void __iomem *base = p->mapbase; unsigned long offs; @@ -88,7 +88,7 @@ static inline void sh_tmu_write(struct sh_tmu_priv *p, int reg_nr, static void sh_tmu_start_stop_ch(struct sh_tmu_priv *p, int start) { - struct sh_tmu_config *cfg = p->pdev->dev.platform_data; + struct sh_timer_config *cfg = p->pdev->dev.platform_data; unsigned long flags, value; /* start stop register shared by multiple timer channels */ @@ -106,7 +106,7 @@ static void sh_tmu_start_stop_ch(struct sh_tmu_priv *p, int start) static int sh_tmu_enable(struct sh_tmu_priv *p) { - struct sh_tmu_config *cfg = p->pdev->dev.platform_data; + struct sh_timer_config *cfg = p->pdev->dev.platform_data; int ret; /* enable clock */ @@ -345,7 +345,7 @@ static int sh_tmu_register(struct sh_tmu_priv *p, char *name, static int sh_tmu_setup(struct sh_tmu_priv *p, struct platform_device *pdev) { - struct sh_tmu_config *cfg = pdev->dev.platform_data; + struct sh_timer_config *cfg = pdev->dev.platform_data; struct resource *res; int irq, ret; ret = -ENXIO; @@ -407,7 +407,7 @@ static int sh_tmu_setup(struct sh_tmu_priv *p, struct platform_device *pdev) static int __devinit sh_tmu_probe(struct platform_device *pdev) { struct sh_tmu_priv *p = platform_get_drvdata(pdev); - struct sh_tmu_config *cfg = pdev->dev.platform_data; + struct sh_timer_config *cfg = pdev->dev.platform_data; int ret; if (p) { diff --git a/include/linux/sh_cmt.h b/include/linux/sh_cmt.h deleted file mode 100644 index 68cacde..0000000 --- a/include/linux/sh_cmt.h +++ /dev/null @@ -1,13 +0,0 @@ -#ifndef __SH_CMT_H__ -#define __SH_CMT_H__ - -struct sh_cmt_config { - char *name; - unsigned long channel_offset; - int timer_bit; - char *clk; - unsigned long clockevent_rating; - unsigned long clocksource_rating; -}; - -#endif /* __SH_CMT_H__ */ diff --git a/include/linux/sh_mtu2.h b/include/linux/sh_mtu2.h deleted file mode 100644 index a988763..0000000 --- a/include/linux/sh_mtu2.h +++ /dev/null @@ -1,12 +0,0 @@ -#ifndef __SH_MTU2_H__ -#define __SH_MTU2_H__ - -struct sh_mtu2_config { - char *name; - int channel_offset; - int timer_bit; - char *clk; - unsigned long clockevent_rating; -}; - -#endif /* __SH_MTU2_H__ */ diff --git a/include/linux/sh_timer.h b/include/linux/sh_timer.h new file mode 100644 index 0000000..864bd56 --- /dev/null +++ b/include/linux/sh_timer.h @@ -0,0 +1,13 @@ +#ifndef __SH_TIMER_H__ +#define __SH_TIMER_H__ + +struct sh_timer_config { + char *name; + long channel_offset; + int timer_bit; + char *clk; + unsigned long clockevent_rating; + unsigned long clocksource_rating; +}; + +#endif /* __SH_TIMER_H__ */ diff --git a/include/linux/sh_tmu.h b/include/linux/sh_tmu.h deleted file mode 100644 index b1195e8..0000000 --- a/include/linux/sh_tmu.h +++ /dev/null @@ -1,13 +0,0 @@ -#ifndef __SH_TMU_H__ -#define __SH_TMU_H__ - -struct sh_tmu_config { - char *name; - unsigned long channel_offset; - int timer_bit; - char *clk; - unsigned long clockevent_rating; - unsigned long clocksource_rating; -}; - -#endif /* __SH_TMU_H__ */ -- cgit v0.10.2 From d1fcc0a8db5e47c1abaa783a3e83dbf5f2184969 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Sun, 3 May 2009 18:05:42 +0900 Subject: clocksource: sh_mtu2/cmt_register() should be static. Neither of these need to be exported, so just make them static. Signed-off-by: Paul Mundt diff --git a/drivers/clocksource/sh_cmt.c b/drivers/clocksource/sh_cmt.c index aeb8c9b..cf56a2a 100644 --- a/drivers/clocksource/sh_cmt.c +++ b/drivers/clocksource/sh_cmt.c @@ -537,9 +537,9 @@ static void sh_cmt_register_clockevent(struct sh_cmt_priv *p, clockevents_register_device(ced); } -int sh_cmt_register(struct sh_cmt_priv *p, char *name, - unsigned long clockevent_rating, - unsigned long clocksource_rating) +static int sh_cmt_register(struct sh_cmt_priv *p, char *name, + unsigned long clockevent_rating, + unsigned long clocksource_rating) { if (p->width == (sizeof(p->max_match_value) * 8)) p->max_match_value = ~0; diff --git a/drivers/clocksource/sh_mtu2.c b/drivers/clocksource/sh_mtu2.c index ef02185..d1ae754 100644 --- a/drivers/clocksource/sh_mtu2.c +++ b/drivers/clocksource/sh_mtu2.c @@ -232,8 +232,8 @@ static void sh_mtu2_register_clockevent(struct sh_mtu2_priv *p, clockevents_register_device(ced); } -int sh_mtu2_register(struct sh_mtu2_priv *p, char *name, - unsigned long clockevent_rating) +static int sh_mtu2_register(struct sh_mtu2_priv *p, char *name, + unsigned long clockevent_rating) { if (clockevent_rating) sh_mtu2_register_clockevent(p, name, clockevent_rating); -- cgit v0.10.2 From 938edae11ee3a7b20b6d754074a0f2c2edc4534b Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Sun, 3 May 2009 18:12:26 +0900 Subject: sh: select both GENERIC_TIME and GENERIC_CLOCKEVENTS. Now that the rest of the timers that didn't support clockevents have been rewritten, both of these can be enabled by default. Signed-off-by: Paul Mundt diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig index c3e9455..565f390 100644 --- a/arch/sh/Kconfig +++ b/arch/sh/Kconfig @@ -78,7 +78,7 @@ config GENERIC_TIME def_bool y config GENERIC_CLOCKEVENTS - def_bool n + def_bool y config GENERIC_CLOCKEVENTS_BROADCAST bool @@ -469,8 +469,6 @@ config SH_TMU bool "TMU timer support" depends on CPU_SH3 || CPU_SH4 default y - select GENERIC_TIME - select GENERIC_CLOCKEVENTS help This enables the use of the TMU as the system timer. @@ -478,8 +476,6 @@ config SH_TIMER_TMU bool "TMU timer driver" depends on !SH_TMU && SYS_SUPPORTS_TMU default y - select GENERIC_TIME - select GENERIC_CLOCKEVENTS help This enables the build of the TMU timer driver. @@ -487,8 +483,6 @@ config SH_TIMER_CMT bool "CMT timer driver" depends on SYS_SUPPORTS_CMT default y - select GENERIC_CLOCKEVENTS - select GENERIC_TIME help This enables build of the CMT timer driver. @@ -496,7 +490,6 @@ config SH_TIMER_MTU2 bool "MTU2 timer driver" depends on SYS_SUPPORTS_MTU2 default y - select GENERIC_CLOCKEVENTS help This enables build of the MTU2 timer driver. -- cgit v0.10.2 From dec56e6312434b2536fedf9d7e9e73d666aaf0a8 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Sun, 3 May 2009 18:18:14 +0900 Subject: sh: Kill off the now unused ARCH_USES_GETTIMEOFFSET code. Now that the stragglers (MTU2/CMT/etc.) have been rewritten and we are selecting both GENERIC_TIME and GENERIC_CLOCKEVENTS, the get_offset() timer op is completely unused. As a result, we are now able to kill off the ARCH_USES_GETTIMEOFFSET references. Signed-off-by: Paul Mundt diff --git a/arch/sh/include/asm/timer.h b/arch/sh/include/asm/timer.h index 581e3fe..cb16645 100644 --- a/arch/sh/include/asm/timer.h +++ b/arch/sh/include/asm/timer.h @@ -9,9 +9,6 @@ struct sys_timer_ops { int (*init)(void); int (*start)(void); int (*stop)(void); -#ifdef CONFIG_ARCH_USES_GETTIMEOFFSET - unsigned long (*get_offset)(void); -#endif }; struct sys_timer { @@ -26,13 +23,6 @@ struct sys_timer { extern struct sys_timer tmu_timer; extern struct sys_timer *sys_timer; -#ifdef CONFIG_ARCH_USES_GETTIMEOFFSET -static inline unsigned long get_timer_offset(void) -{ - return sys_timer->ops->get_offset(); -} -#endif - /* arch/sh/kernel/timers/timer.c */ struct sys_timer *get_sys_timer(void); diff --git a/arch/sh/kernel/time_32.c b/arch/sh/kernel/time_32.c index 9d34dff..d41ca4c 100644 --- a/arch/sh/kernel/time_32.c +++ b/arch/sh/kernel/time_32.c @@ -83,13 +83,6 @@ static int __init rtc_generic_init(void) } module_init(rtc_generic_init); -#ifdef CONFIG_ARCH_USES_GETTIMEOFFSET -u32 arch_gettimeoffset(void) -{ - return get_timer_offset() * 1000; -} -#endif /* CONFIG_ARCH_USES_GETTIMEOFFSET */ - /* last time the RTC clock got updated */ static long last_rtc_update; @@ -185,7 +178,6 @@ struct clocksource clocksource_sh = { .name = "SuperH", }; -#ifndef CONFIG_ARCH_USES_GETTIMEOFFSET unsigned long long sched_clock(void) { unsigned long long cycles; @@ -197,7 +189,6 @@ unsigned long long sched_clock(void) cycles = clocksource_sh.read(&clocksource_sh); return cyc2ns(&clocksource_sh, cycles); } -#endif static void __init sh_late_time_init(void) { -- cgit v0.10.2 From 25483efeb2e56521e418a59fa93401be156dc3bb Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Sun, 3 May 2009 18:29:27 +0900 Subject: sh: Move dummy clockevents broadcast timer to its new home. The old arch/sh/kernel/timers/ directly will be going away completely once the rest of the TMU users are migrated, so move the dummy broadcast driver up a level in preparation. Signed-off-by: Paul Mundt diff --git a/arch/sh/kernel/Makefile_32 b/arch/sh/kernel/Makefile_32 index 82a3a15..5b1d4d0 100644 --- a/arch/sh/kernel/Makefile_32 +++ b/arch/sh/kernel/Makefile_32 @@ -32,4 +32,6 @@ obj-$(CONFIG_DYNAMIC_FTRACE) += ftrace.o obj-$(CONFIG_DUMP_CODE) += disassemble.o obj-$(CONFIG_HIBERNATION) += swsusp.o +obj-$(CONFIG_GENERIC_CLOCKEVENTS_BROADCAST) += localtimer.o + EXTRA_CFLAGS += -Werror diff --git a/arch/sh/kernel/Makefile_64 b/arch/sh/kernel/Makefile_64 index fe425d7..d256c77 100644 --- a/arch/sh/kernel/Makefile_64 +++ b/arch/sh/kernel/Makefile_64 @@ -17,4 +17,6 @@ obj-$(CONFIG_STACKTRACE) += stacktrace.o obj-$(CONFIG_IO_TRAPPED) += io_trapped.o obj-$(CONFIG_GENERIC_GPIO) += gpio.o +obj-$(CONFIG_GENERIC_CLOCKEVENTS_BROADCAST) += localtimer.o + EXTRA_CFLAGS += -Werror diff --git a/arch/sh/kernel/localtimer.c b/arch/sh/kernel/localtimer.c new file mode 100644 index 0000000..96e8eae --- /dev/null +++ b/arch/sh/kernel/localtimer.c @@ -0,0 +1,57 @@ +/* + * Dummy local timer + * + * Copyright (C) 2008 Paul Mundt + * + * cloned from: + * + * linux/arch/arm/mach-realview/localtimer.c + * + * Copyright (C) 2002 ARM Ltd. + * All Rights Reserved + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include + +static DEFINE_PER_CPU(struct clock_event_device, local_clockevent); + +/* + * Used on SMP for either the local timer or SMP_MSG_TIMER + */ +void local_timer_interrupt(void) +{ + struct clock_event_device *clk = &__get_cpu_var(local_clockevent); + + clk->event_handler(clk); +} + +static void dummy_timer_set_mode(enum clock_event_mode mode, + struct clock_event_device *clk) +{ +} + +void __cpuinit local_timer_setup(unsigned int cpu) +{ + struct clock_event_device *clk = &per_cpu(local_clockevent, cpu); + + clk->name = "dummy_timer"; + clk->features = CLOCK_EVT_FEAT_DUMMY; + clk->rating = 200; + clk->mult = 1; + clk->set_mode = dummy_timer_set_mode; + clk->broadcast = smp_timer_broadcast; + clk->cpumask = cpumask_of(cpu); + + clockevents_register_device(clk); +} diff --git a/arch/sh/kernel/timers/Makefile b/arch/sh/kernel/timers/Makefile index 44156df..8bceba5 100644 --- a/arch/sh/kernel/timers/Makefile +++ b/arch/sh/kernel/timers/Makefile @@ -5,5 +5,3 @@ obj-y := timer.o obj-$(CONFIG_SH_TMU) += timer-tmu.o - -obj-$(CONFIG_GENERIC_CLOCKEVENTS_BROADCAST) += timer-broadcast.o diff --git a/arch/sh/kernel/timers/timer-broadcast.c b/arch/sh/kernel/timers/timer-broadcast.c deleted file mode 100644 index 96e8eae..0000000 --- a/arch/sh/kernel/timers/timer-broadcast.c +++ /dev/null @@ -1,57 +0,0 @@ -/* - * Dummy local timer - * - * Copyright (C) 2008 Paul Mundt - * - * cloned from: - * - * linux/arch/arm/mach-realview/localtimer.c - * - * Copyright (C) 2002 ARM Ltd. - * All Rights Reserved - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#include -#include -#include -#include -#include -#include -#include -#include -#include - -static DEFINE_PER_CPU(struct clock_event_device, local_clockevent); - -/* - * Used on SMP for either the local timer or SMP_MSG_TIMER - */ -void local_timer_interrupt(void) -{ - struct clock_event_device *clk = &__get_cpu_var(local_clockevent); - - clk->event_handler(clk); -} - -static void dummy_timer_set_mode(enum clock_event_mode mode, - struct clock_event_device *clk) -{ -} - -void __cpuinit local_timer_setup(unsigned int cpu) -{ - struct clock_event_device *clk = &per_cpu(local_clockevent, cpu); - - clk->name = "dummy_timer"; - clk->features = CLOCK_EVT_FEAT_DUMMY; - clk->rating = 200; - clk->mult = 1; - clk->set_mode = dummy_timer_set_mode; - clk->broadcast = smp_timer_broadcast; - clk->cpumask = cpumask_of(cpu); - - clockevents_register_device(clk); -} -- cgit v0.10.2 From 40c8bca76ecaa6b663d403d34f0fcd422bbdbffd Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Thu, 7 May 2009 15:24:36 +0900 Subject: sh: Flag IRQSTACKS as BROKEN for now. There still seems to be some stack corruption to sort out here, so flag this as BROKEN until this issue is sorted out. Signed-off-by: Paul Mundt diff --git a/arch/sh/Kconfig.debug b/arch/sh/Kconfig.debug index 0d62681..fdb0493 100644 --- a/arch/sh/Kconfig.debug +++ b/arch/sh/Kconfig.debug @@ -92,7 +92,7 @@ config 4KSTACKS config IRQSTACKS bool "Use separate kernel stacks when processing interrupts" - depends on DEBUG_KERNEL && SUPERH32 + depends on DEBUG_KERNEL && SUPERH32 && BROKEN help If you say Y here the kernel will use separate kernel stacks for handling hard and soft interrupts. This can help avoid -- cgit v0.10.2 From ee1acbfabd5270b40ce2cfdc202070b7ca91cdff Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Thu, 7 May 2009 16:38:16 +0900 Subject: sh: Handle shm_align_mask also for HAVE_ARCH_UNMAPPED_AREA_TOPDOWN. Presently shm_align_mask is only looked at for the bottom up case, but we still want this for proper colouring constraints in the topdown case. Signed-off-by: Paul Mundt diff --git a/arch/sh/include/asm/cacheflush.h b/arch/sh/include/asm/cacheflush.h index 09acbc3..4c5462d 100644 --- a/arch/sh/include/asm/cacheflush.h +++ b/arch/sh/include/asm/cacheflush.h @@ -75,7 +75,5 @@ extern void copy_from_user_page(struct vm_area_struct *vma, #define flush_cache_vmap(start, end) flush_cache_all() #define flush_cache_vunmap(start, end) flush_cache_all() -#define HAVE_ARCH_UNMAPPED_AREA - #endif /* __KERNEL__ */ #endif /* __ASM_SH_CACHEFLUSH_H */ diff --git a/arch/sh/include/asm/pgtable.h b/arch/sh/include/asm/pgtable.h index b517ae0..2a011b1 100644 --- a/arch/sh/include/asm/pgtable.h +++ b/arch/sh/include/asm/pgtable.h @@ -154,6 +154,10 @@ extern void kmap_coherent_init(void); #define kmap_coherent_init() do { } while (0) #endif +/* arch/sh/mm/mmap.c */ +#define HAVE_ARCH_UNMAPPED_AREA +#define HAVE_ARCH_UNMAPPED_AREA_TOPDOWN + #include #endif /* __ASM_SH_PGTABLE_H */ diff --git a/arch/sh/mm/mmap.c b/arch/sh/mm/mmap.c index 931f4d0..1b5fdfb 100644 --- a/arch/sh/mm/mmap.c +++ b/arch/sh/mm/mmap.c @@ -1,7 +1,7 @@ /* * arch/sh/mm/mmap.c * - * Copyright (C) 2008 Paul Mundt + * Copyright (C) 2008 - 2009 Paul Mundt * * This file is subject to the terms and conditions of the GNU General Public * License. See the file "COPYING" in the main directory of this archive @@ -21,9 +21,26 @@ EXPORT_SYMBOL(shm_align_mask); /* * To avoid cache aliases, we map the shared page with same color. */ -#define COLOUR_ALIGN(addr, pgoff) \ - ((((addr) + shm_align_mask) & ~shm_align_mask) + \ - (((pgoff) << PAGE_SHIFT) & shm_align_mask)) +static inline unsigned long COLOUR_ALIGN(unsigned long addr, + unsigned long pgoff) +{ + unsigned long base = (addr + shm_align_mask) & ~shm_align_mask; + unsigned long off = (pgoff << PAGE_SHIFT) & shm_align_mask; + + return base + off; +} + +static inline unsigned long COLOUR_ALIGN_DOWN(unsigned long addr, + unsigned long pgoff) +{ + unsigned long base = addr & ~shm_align_mask; + unsigned long off = (pgoff << PAGE_SHIFT) & shm_align_mask; + + if (base + off <= addr) + return base + off; + + return base - off; +} unsigned long arch_get_unmapped_area(struct file *filp, unsigned long addr, unsigned long len, unsigned long pgoff, unsigned long flags) @@ -103,6 +120,117 @@ full_search: addr = COLOUR_ALIGN(addr, pgoff); } } + +unsigned long +arch_get_unmapped_area_topdown(struct file *filp, const unsigned long addr0, + const unsigned long len, const unsigned long pgoff, + const unsigned long flags) +{ + struct vm_area_struct *vma; + struct mm_struct *mm = current->mm; + unsigned long addr = addr0; + int do_colour_align; + + if (flags & MAP_FIXED) { + /* We do not accept a shared mapping if it would violate + * cache aliasing constraints. + */ + if ((flags & MAP_SHARED) && + ((addr - (pgoff << PAGE_SHIFT)) & shm_align_mask)) + return -EINVAL; + return addr; + } + + if (unlikely(len > TASK_SIZE)) + return -ENOMEM; + + do_colour_align = 0; + if (filp || (flags & MAP_SHARED)) + do_colour_align = 1; + + /* requesting a specific address */ + if (addr) { + if (do_colour_align) + addr = COLOUR_ALIGN(addr, pgoff); + else + addr = PAGE_ALIGN(addr); + + vma = find_vma(mm, addr); + if (TASK_SIZE - len >= addr && + (!vma || addr + len <= vma->vm_start)) + return addr; + } + + /* check if free_area_cache is useful for us */ + if (len <= mm->cached_hole_size) { + mm->cached_hole_size = 0; + mm->free_area_cache = mm->mmap_base; + } + + /* either no address requested or can't fit in requested address hole */ + addr = mm->free_area_cache; + if (do_colour_align) { + unsigned long base = COLOUR_ALIGN_DOWN(addr-len, pgoff); + + addr = base + len; + } + + /* make sure it can fit in the remaining address space */ + if (likely(addr > len)) { + vma = find_vma(mm, addr-len); + if (!vma || addr <= vma->vm_start) { + /* remember the address as a hint for next time */ + return (mm->free_area_cache = addr-len); + } + } + + if (unlikely(mm->mmap_base < len)) + goto bottomup; + + addr = mm->mmap_base-len; + if (do_colour_align) + addr = COLOUR_ALIGN_DOWN(addr, pgoff); + + do { + /* + * Lookup failure means no vma is above this address, + * else if new region fits below vma->vm_start, + * return with success: + */ + vma = find_vma(mm, addr); + if (likely(!vma || addr+len <= vma->vm_start)) { + /* remember the address as a hint for next time */ + return (mm->free_area_cache = addr); + } + + /* remember the largest hole we saw so far */ + if (addr + mm->cached_hole_size < vma->vm_start) + mm->cached_hole_size = vma->vm_start - addr; + + /* try just below the current vma->vm_start */ + addr = vma->vm_start-len; + if (do_colour_align) + addr = COLOUR_ALIGN_DOWN(addr, pgoff); + } while (likely(len < vma->vm_start)); + +bottomup: + /* + * A failed mmap() very likely causes application failure, + * so fall back to the bottom-up function here. This scenario + * can happen with large stack limits and large mmap() + * allocations. + */ + mm->cached_hole_size = ~0UL; + mm->free_area_cache = TASK_UNMAPPED_BASE; + addr = arch_get_unmapped_area(filp, addr0, len, pgoff, flags); + /* + * Restore the topdown base: + */ + mm->free_area_cache = mm->mmap_base; + mm->cached_hole_size = ~0UL; + + return addr; +} #endif /* CONFIG_MMU */ /* -- cgit v0.10.2 From ae318a148e4d255dfbc87d963fdd6031c2af9c46 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Thu, 7 May 2009 17:55:09 +0900 Subject: sh: sh64 still needs ARCH_USES_GETTIMEOFFSET temporarily. sh64 is still using this, so re-enable it temporarily while SH-5 gets converted to use the generic code. Signed-off-by: Paul Mundt diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig index 565f390..02688d7 100644 --- a/arch/sh/Kconfig +++ b/arch/sh/Kconfig @@ -141,6 +141,10 @@ config ARCH_NO_VIRT_TO_BUS config ARCH_HAS_DEFAULT_IDLE def_bool y +config ARCH_USES_GETTIMEOFFSET + def_bool y + depends on SUPERH64 + config IO_TRAPPED bool -- cgit v0.10.2 From 0fb849b9d743a20056f2418cd955e5c650658663 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Thu, 7 May 2009 18:10:27 +0900 Subject: sh: Integrate the SH-5 onchip_remap() more coherently. Presently this is special-cased for early initialization. While there are situations where these static early initializations are still necessary, with minor changes it is possible to use this for the regular ioremap implementation as well. This allows us to kill off the special-casing for the remap completely and to start tidying up all of the SH-5 special-casing in drivers. Signed-off-by: Paul Mundt diff --git a/arch/sh/boards/mach-cayman/irq.c b/arch/sh/boards/mach-cayman/irq.c index da62ad5..dbb00c9 100644 --- a/arch/sh/boards/mach-cayman/irq.c +++ b/arch/sh/boards/mach-cayman/irq.c @@ -161,7 +161,7 @@ void init_cayman_irq(void) { int i; - epld_virt = onchip_remap(EPLD_BASE, 1024, "EPLD"); + epld_virt = (unsigned long)ioremap_nocache(EPLD_BASE, 1024); if (!epld_virt) { printk(KERN_ERR "Cayman IRQ: Unable to remap EPLD\n"); return; diff --git a/arch/sh/boards/mach-cayman/setup.c b/arch/sh/boards/mach-cayman/setup.c index e7f9cc5..7e8216a 100644 --- a/arch/sh/boards/mach-cayman/setup.c +++ b/arch/sh/boards/mach-cayman/setup.c @@ -102,7 +102,7 @@ static int __init smsc_superio_setup(void) { unsigned char devid, devrev; - smsc_superio_virt = onchip_remap(SMSC_SUPERIO_BASE, 1024, "SMSC SuperIO"); + smsc_superio_virt = (unsigned long)ioremap_nocache(SMSC_SUPERIO_BASE, 1024); if (!smsc_superio_virt) { panic("Unable to remap SMSC SuperIO\n"); } diff --git a/arch/sh/drivers/pci/pci-sh5.c b/arch/sh/drivers/pci/pci-sh5.c index cf43185..873ed2b 100644 --- a/arch/sh/drivers/pci/pci-sh5.c +++ b/arch/sh/drivers/pci/pci-sh5.c @@ -119,12 +119,12 @@ static int __init sh5pci_init(void) return -EINVAL; } - pcicr_virt = onchip_remap(SH5PCI_ICR_BASE, 1024, "PCICR"); + pcicr_virt = (unsigned long)ioremap_nocache(SH5PCI_ICR_BASE, 1024); if (!pcicr_virt) { panic("Unable to remap PCICR\n"); } - PCI_IO_AREA = onchip_remap(SH5PCI_IO_BASE, 0x10000, "PCIIO"); + PCI_IO_AREA = (unsigned long)ioremap_nocache(SH5PCI_IO_BASE, 0x10000); if (!PCI_IO_AREA) { panic("Unable to remap PCIIO\n"); } diff --git a/arch/sh/include/asm/io.h b/arch/sh/include/asm/io.h index ef21734..c7c360b 100644 --- a/arch/sh/include/asm/io.h +++ b/arch/sh/include/asm/io.h @@ -224,11 +224,6 @@ void __iomem *__ioremap(unsigned long offset, unsigned long size, unsigned long flags); void __iounmap(void __iomem *addr); -/* arch/sh/mm/ioremap_64.c */ -unsigned long onchip_remap(unsigned long addr, unsigned long size, - const char *name); -extern void onchip_unmap(unsigned long vaddr); - static inline void __iomem * __ioremap_mode(unsigned long offset, unsigned long size, unsigned long flags) { @@ -263,8 +258,6 @@ __ioremap_mode(unsigned long offset, unsigned long size, unsigned long flags) return __ioremap(offset, size, flags); } #else -#define onchip_remap(addr, size, name) (addr) -#define onchip_unmap(addr) do { } while (0) #define __ioremap_mode(offset, size, flags) ((void __iomem *)(offset)) #define __iounmap(addr) do { } while (0) #endif /* CONFIG_MMU */ diff --git a/arch/sh/kernel/cpu/irq/intc-sh5.c b/arch/sh/kernel/cpu/irq/intc-sh5.c index d8679a4..02d8137 100644 --- a/arch/sh/kernel/cpu/irq/intc-sh5.c +++ b/arch/sh/kernel/cpu/irq/intc-sh5.c @@ -188,7 +188,7 @@ void __init plat_irq_setup(void) unsigned long reg; int i; - intc_virt = onchip_remap(INTC_BASE, 1024, "INTC"); + intc_virt = (unsigned long)ioremap_nocache(INTC_BASE, 1024); if (!intc_virt) { panic("Unable to remap INTC\n"); } diff --git a/arch/sh/kernel/cpu/sh5/Makefile b/arch/sh/kernel/cpu/sh5/Makefile index ce4602e..a184a31 100644 --- a/arch/sh/kernel/cpu/sh5/Makefile +++ b/arch/sh/kernel/cpu/sh5/Makefile @@ -6,6 +6,9 @@ obj-y := entry.o probe.o switchto.o obj-$(CONFIG_SH_FPU) += fpu.o obj-$(CONFIG_KALLSYMS) += unwind.o +# CPU subtype setup +obj-$(CONFIG_CPU_SH5) += setup-sh5.o + # Primary on-chip clocks (common) clock-$(CONFIG_CPU_SH5) := clock-sh5.o diff --git a/arch/sh/kernel/cpu/sh5/clock-sh5.c b/arch/sh/kernel/cpu/sh5/clock-sh5.c index 52c4924..5486324 100644 --- a/arch/sh/kernel/cpu/sh5/clock-sh5.c +++ b/arch/sh/kernel/cpu/sh5/clock-sh5.c @@ -71,7 +71,7 @@ static struct clk_ops *sh5_clk_ops[] = { void __init arch_init_clk_ops(struct clk_ops **ops, int idx) { - cprc_base = onchip_remap(CPRC_BASE, 1024, "CPRC"); + cprc_base = (unsigned long)ioremap_nocache(CPRC_BASE, 1024); BUG_ON(!cprc_base); if (idx < ARRAY_SIZE(sh5_clk_ops)) diff --git a/arch/sh/kernel/cpu/sh5/entry.S b/arch/sh/kernel/cpu/sh5/entry.S index 7e49cb8..5162975 100644 --- a/arch/sh/kernel/cpu/sh5/entry.S +++ b/arch/sh/kernel/cpu/sh5/entry.S @@ -1410,8 +1410,8 @@ peek_real_address_q: r2(out) : result quadword This is provided as a cheapskate way of manipulating device - registers for debugging (to avoid the need to onchip_remap the debug - module, and to avoid the need to onchip_remap the watchpoint + registers for debugging (to avoid the need to ioremap the debug + module, and to avoid the need to ioremap the watchpoint controller in a way that identity maps sufficient bits to avoid the SH5-101 cut2 silicon defect). @@ -1459,8 +1459,8 @@ poke_real_address_q: r3 : quadword value to write. This is provided as a cheapskate way of manipulating device - registers for debugging (to avoid the need to onchip_remap the debug - module, and to avoid the need to onchip_remap the watchpoint + registers for debugging (to avoid the need to ioremap the debug + module, and to avoid the need to ioremap the watchpoint controller in a way that identity maps sufficient bits to avoid the SH5-101 cut2 silicon defect). diff --git a/arch/sh/kernel/cpu/sh5/setup-sh5.c b/arch/sh/kernel/cpu/sh5/setup-sh5.c new file mode 100644 index 0000000..d8d59fe --- /dev/null +++ b/arch/sh/kernel/cpu/sh5/setup-sh5.c @@ -0,0 +1,46 @@ +/* + * SH5-101/SH5-103 CPU Setup + * + * Copyright (C) 2009 Paul Mundt + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include +#include +#include +#include +#include +#include +#include + +static struct plat_sci_port sci_platform_data[] = { + { + .mapbase = PHYS_PERIPHERAL_BLOCK + 0x01030000, + .flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP, + .type = PORT_SCIF, + .irqs = { 39, 40, 42, 0 }, + }, { + .flags = 0, + } +}; + +static struct platform_device sci_device = { + .name = "sh-sci", + .id = -1, + .dev = { + .platform_data = sci_platform_data, + }, +}; + +static struct platform_device *sh5_devices[] __initdata = { + &sci_device, +}; + +static int __init sh5_devices_setup(void) +{ + return platform_add_devices(sh5_devices, + ARRAY_SIZE(sh5_devices)); +} +__initcall(sh5_devices_setup); diff --git a/arch/sh/kernel/time_64.c b/arch/sh/kernel/time_64.c index f4f5e8a..7bfeaa0 100644 --- a/arch/sh/kernel/time_64.c +++ b/arch/sh/kernel/time_64.c @@ -243,12 +243,12 @@ void __init time_init(void) unsigned long interval; struct clk *clk; - tmu_base = onchip_remap(TMU_BASE, 1024, "TMU"); + tmu_base = (unsigned long)ioremap_nocache(TMU_BASE, 1024); if (!tmu_base) { panic("Unable to remap TMU\n"); } - rtc_base = onchip_remap(RTC_BASE, 1024, "RTC"); + rtc_base = (unsigned long)ioremap_nocache(RTC_BASE, 1024); if (!rtc_base) { panic("Unable to remap RTC\n"); } diff --git a/arch/sh/mm/ioremap_64.c b/arch/sh/mm/ioremap_64.c index 31e1bb5..2331229 100644 --- a/arch/sh/mm/ioremap_64.c +++ b/arch/sh/mm/ioremap_64.c @@ -27,88 +27,17 @@ #include #include -static void shmedia_mapioaddr(unsigned long, unsigned long); -static unsigned long shmedia_ioremap(struct resource *, u32, int); - -/* - * Generic mapping function (not visible outside): - */ - -/* - * Remap an arbitrary physical address space into the kernel virtual - * address space. Needed when the kernel wants to access high addresses - * directly. - * - * NOTE! We need to allow non-page-aligned mappings too: we will obviously - * have to convert them into an offset in a page-aligned mapping, but the - * caller shouldn't need to know that small detail. - */ -void *__ioremap(unsigned long phys_addr, unsigned long size, - unsigned long flags) -{ - void * addr; - struct vm_struct * area; - unsigned long offset, last_addr; - pgprot_t pgprot; - - /* Don't allow wraparound or zero size */ - last_addr = phys_addr + size - 1; - if (!size || last_addr < phys_addr) - return NULL; - - pgprot = __pgprot(_PAGE_PRESENT | _PAGE_READ | - _PAGE_WRITE | _PAGE_DIRTY | - _PAGE_ACCESSED | _PAGE_SHARED | flags); - - /* - * Mappings have to be page-aligned - */ - offset = phys_addr & ~PAGE_MASK; - phys_addr &= PAGE_MASK; - size = PAGE_ALIGN(last_addr + 1) - phys_addr; - - /* - * Ok, go for it.. - */ - area = get_vm_area(size, VM_IOREMAP); - if (!area) - return NULL; - pr_debug("Get vm_area returns %p addr %p\n", area, area->addr); - area->phys_addr = phys_addr; - addr = area->addr; - if (ioremap_page_range((unsigned long)addr, (unsigned long)addr + size, - phys_addr, pgprot)) { - vunmap(addr); - return NULL; - } - return (void *) (offset + (char *)addr); -} -EXPORT_SYMBOL(__ioremap); - -void __iounmap(void *addr) -{ - struct vm_struct *area; - - vfree((void *) (PAGE_MASK & (unsigned long) addr)); - area = remove_vm_area((void *) (PAGE_MASK & (unsigned long) addr)); - if (!area) { - printk(KERN_ERR "iounmap: bad address %p\n", addr); - return; - } - - kfree(area); -} -EXPORT_SYMBOL(__iounmap); - static struct resource shmedia_iomap = { .name = "shmedia_iomap", .start = IOBASE_VADDR + PAGE_SIZE, .end = IOBASE_END - 1, }; -static void shmedia_mapioaddr(unsigned long pa, unsigned long va); +static void shmedia_mapioaddr(unsigned long pa, unsigned long va, + unsigned long flags); static void shmedia_unmapioaddr(unsigned long vaddr); -static unsigned long shmedia_ioremap(struct resource *res, u32 pa, int sz); +static void __iomem *shmedia_ioremap(struct resource *res, u32 pa, + int sz, unsigned long flags); /* * We have the same problem as the SPARC, so lets have the same comment: @@ -130,18 +59,18 @@ static struct xresource xresv[XNRES]; static struct xresource *xres_alloc(void) { - struct xresource *xrp; - int n; - - xrp = xresv; - for (n = 0; n < XNRES; n++) { - if (xrp->xflag == 0) { - xrp->xflag = 1; - return xrp; - } - xrp++; - } - return NULL; + struct xresource *xrp; + int n; + + xrp = xresv; + for (n = 0; n < XNRES; n++) { + if (xrp->xflag == 0) { + xrp->xflag = 1; + return xrp; + } + xrp++; + } + return NULL; } static void xres_free(struct xresource *xrp) @@ -161,76 +90,71 @@ static struct resource *shmedia_find_resource(struct resource *root, return NULL; } -static unsigned long shmedia_alloc_io(unsigned long phys, unsigned long size, - const char *name) +static void __iomem *shmedia_alloc_io(unsigned long phys, unsigned long size, + const char *name, unsigned long flags) { - static int printed_full = 0; - struct xresource *xres; - struct resource *res; - char *tack; - int tlen; - - if (name == NULL) name = "???"; - - if ((xres = xres_alloc()) != 0) { - tack = xres->xname; - res = &xres->xres; - } else { - if (!printed_full) { - printk("%s: done with statics, switching to kmalloc\n", - __func__); - printed_full = 1; - } - tlen = strlen(name); - tack = kmalloc(sizeof (struct resource) + tlen + 1, GFP_KERNEL); - if (!tack) - return -ENOMEM; - memset(tack, 0, sizeof(struct resource)); - res = (struct resource *) tack; - tack += sizeof (struct resource); - } - - strncpy(tack, name, XNMLN); - tack[XNMLN] = 0; - res->name = tack; - - return shmedia_ioremap(res, phys, size); + static int printed_full; + struct xresource *xres; + struct resource *res; + char *tack; + int tlen; + + if (name == NULL) + name = "???"; + + xres = xres_alloc(); + if (xres != 0) { + tack = xres->xname; + res = &xres->xres; + } else { + if (!printed_full) { + printk(KERN_NOTICE "%s: done with statics, " + "switching to kmalloc\n", __func__); + printed_full = 1; + } + tlen = strlen(name); + tack = kmalloc(sizeof(struct resource) + tlen + 1, GFP_KERNEL); + if (!tack) + return NULL; + memset(tack, 0, sizeof(struct resource)); + res = (struct resource *) tack; + tack += sizeof(struct resource); + } + + strncpy(tack, name, XNMLN); + tack[XNMLN] = 0; + res->name = tack; + + return shmedia_ioremap(res, phys, size, flags); } -static unsigned long shmedia_ioremap(struct resource *res, u32 pa, int sz) +static void __iomem *shmedia_ioremap(struct resource *res, u32 pa, int sz, + unsigned long flags) { - unsigned long offset = ((unsigned long) pa) & (~PAGE_MASK); + unsigned long offset = ((unsigned long) pa) & (~PAGE_MASK); unsigned long round_sz = (offset + sz + PAGE_SIZE-1) & PAGE_MASK; - unsigned long va; - unsigned int psz; + unsigned long va; + unsigned int psz; - if (allocate_resource(&shmedia_iomap, res, round_sz, + if (allocate_resource(&shmedia_iomap, res, round_sz, shmedia_iomap.start, shmedia_iomap.end, PAGE_SIZE, NULL, NULL) != 0) { - panic("alloc_io_res(%s): cannot occupy\n", - (res->name != NULL)? res->name: "???"); - } + panic("alloc_io_res(%s): cannot occupy\n", + (res->name != NULL) ? res->name : "???"); + } - va = res->start; - pa &= PAGE_MASK; + va = res->start; + pa &= PAGE_MASK; psz = (res->end - res->start + (PAGE_SIZE - 1)) / PAGE_SIZE; - /* log at boot time ... */ - printk("mapioaddr: %6s [%2d page%s] va 0x%08lx pa 0x%08x\n", - ((res->name != NULL) ? res->name : "???"), - psz, psz == 1 ? " " : "s", va, pa); - - for (psz = res->end - res->start + 1; psz != 0; psz -= PAGE_SIZE) { - shmedia_mapioaddr(pa, va); - va += PAGE_SIZE; - pa += PAGE_SIZE; - } - - res->start += offset; - res->end = res->start + sz - 1; /* not strictly necessary.. */ + for (psz = res->end - res->start + 1; psz != 0; psz -= PAGE_SIZE) { + shmedia_mapioaddr(pa, va, flags); + va += PAGE_SIZE; + pa += PAGE_SIZE; + } - return res->start; + return (void __iomem *)(unsigned long)(res->start + offset); } static void shmedia_free_io(struct resource *res) @@ -249,14 +173,12 @@ static void shmedia_free_io(struct resource *res) static __init_refok void *sh64_get_page(void) { - extern int after_bootmem; void *page; - if (after_bootmem) { - page = (void *)get_zeroed_page(GFP_ATOMIC); - } else { + if (after_bootmem) + page = (void *)get_zeroed_page(GFP_KERNEL); + else page = alloc_bootmem_pages(PAGE_SIZE); - } if (!page || ((unsigned long)page & ~PAGE_MASK)) panic("sh64_get_page: Out of memory already?\n"); @@ -264,17 +186,20 @@ static __init_refok void *sh64_get_page(void) return page; } -static void shmedia_mapioaddr(unsigned long pa, unsigned long va) +static void shmedia_mapioaddr(unsigned long pa, unsigned long va, + unsigned long flags) { pgd_t *pgdp; pud_t *pudp; pmd_t *pmdp; pte_t *ptep, pte; pgprot_t prot; - unsigned long flags = 1; /* 1 = CB0-1 device */ pr_debug("shmedia_mapiopage pa %08lx va %08lx\n", pa, va); + if (!flags) + flags = 1; /* 1 = CB0-1 device */ + pgdp = pgd_offset_k(va); if (pgd_none(*pgdp) || !pgd_present(*pgdp)) { pudp = (pud_t *)sh64_get_page(); @@ -288,7 +213,7 @@ static void shmedia_mapioaddr(unsigned long pa, unsigned long va) } pmdp = pmd_offset(pudp, va); - if (pmd_none(*pmdp) || !pmd_present(*pmdp) ) { + if (pmd_none(*pmdp) || !pmd_present(*pmdp)) { ptep = (pte_t *)sh64_get_page(); set_pmd(pmdp, __pmd((unsigned long)ptep + _PAGE_TABLE)); } @@ -336,17 +261,19 @@ static void shmedia_unmapioaddr(unsigned long vaddr) pte_clear(&init_mm, vaddr, ptep); } -unsigned long onchip_remap(unsigned long phys, unsigned long size, const char *name) +void __iomem *__ioremap(unsigned long offset, unsigned long size, + unsigned long flags) { - if (size < PAGE_SIZE) - size = PAGE_SIZE; + char name[14]; - return shmedia_alloc_io(phys, size, name); + sprintf(name, "phys_%08x", (u32)offset); + return shmedia_alloc_io(offset, size, name, flags); } -EXPORT_SYMBOL(onchip_remap); +EXPORT_SYMBOL(__ioremap); -void onchip_unmap(unsigned long vaddr) +void __iounmap(void __iomem *virtual) { + unsigned long vaddr = (unsigned long)virtual & PAGE_MASK; struct resource *res; unsigned int psz; @@ -357,10 +284,7 @@ void onchip_unmap(unsigned long vaddr) return; } - psz = (res->end - res->start + (PAGE_SIZE - 1)) / PAGE_SIZE; - - printk(KERN_DEBUG "unmapioaddr: %6s [%2d page%s] freed\n", - res->name, psz, psz == 1 ? " " : "s"); + psz = (res->end - res->start + (PAGE_SIZE - 1)) / PAGE_SIZE; shmedia_free_io(res); @@ -371,9 +295,8 @@ void onchip_unmap(unsigned long vaddr) kfree(res); } } -EXPORT_SYMBOL(onchip_unmap); +EXPORT_SYMBOL(__iounmap); -#ifdef CONFIG_PROC_FS static int ioremap_proc_info(char *buf, char **start, off_t fpos, int length, int *eof, void *data) @@ -385,7 +308,10 @@ ioremap_proc_info(char *buf, char **start, off_t fpos, int length, int *eof, for (r = ((struct resource *)data)->child; r != NULL; r = r->sibling) { if (p + 32 >= e) /* Better than nothing */ break; - if ((nm = r->name) == 0) nm = "???"; + nm = r->name; + if (nm == NULL) + nm = "???"; + p += sprintf(p, "%08lx-%08lx: %s\n", (unsigned long)r->start, (unsigned long)r->end, nm); @@ -393,14 +319,11 @@ ioremap_proc_info(char *buf, char **start, off_t fpos, int length, int *eof, return p-buf; } -#endif /* CONFIG_PROC_FS */ static int __init register_proc_onchip(void) { -#ifdef CONFIG_PROC_FS - create_proc_read_entry("io_map",0,0, ioremap_proc_info, &shmedia_iomap); -#endif + create_proc_read_entry("io_map", 0, 0, ioremap_proc_info, + &shmedia_iomap); return 0; } - -__initcall(register_proc_onchip); +late_initcall(register_proc_onchip); diff --git a/drivers/serial/sh-sci.c b/drivers/serial/sh-sci.c index dbf5357..728d6a0 100644 --- a/drivers/serial/sh-sci.c +++ b/drivers/serial/sh-sci.c @@ -985,13 +985,7 @@ static void sci_config_port(struct uart_port *port, int flags) port->type = s->type; if (port->flags & UPF_IOREMAP && !port->membase) { -#if defined(CONFIG_SUPERH64) - port->mapbase = onchip_remap(SCIF_ADDR_SH5, 1024, "SCIF"); - port->membase = (void __iomem *)port->mapbase; -#else port->membase = ioremap_nocache(port->mapbase, 0x40); -#endif - dev_err(port->dev, "can't remap port#%d\n", port->line); } } -- cgit v0.10.2 From c51279ec0d2d959e13831ae84b714301f0494f27 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Thu, 7 May 2009 18:17:20 +0900 Subject: sh: Kill off unused SH-5 irq_describe cruft. Signed-off-by: Paul Mundt diff --git a/arch/sh/boards/mach-cayman/irq.c b/arch/sh/boards/mach-cayman/irq.c index dbb00c9..33f77085 100644 --- a/arch/sh/boards/mach-cayman/irq.c +++ b/arch/sh/boards/mach-cayman/irq.c @@ -142,21 +142,6 @@ int cayman_irq_demux(int evt) return irq; } -#if defined(CONFIG_PROC_FS) && defined(CONFIG_SYSCTL) -int cayman_irq_describe(char* p, int irq) -{ - if (irq < NR_INTC_IRQS) { - return intc_irq_describe(p, irq); - } else if (irq < NR_INTC_IRQS + 8) { - return sprintf(p, "(SMSC %d)", irq - NR_INTC_IRQS); - } else if ((irq >= NR_INTC_IRQS + 24) && (irq < NR_INTC_IRQS + 32)) { - return sprintf(p, "(PCI2 %d)", irq - (NR_INTC_IRQS + 24)); - } - - return 0; -} -#endif - void init_cayman_irq(void) { int i; diff --git a/arch/sh/include/cpu-sh5/cpu/irq.h b/arch/sh/include/cpu-sh5/cpu/irq.h index f0f0756e..0ccf257 100644 --- a/arch/sh/include/cpu-sh5/cpu/irq.h +++ b/arch/sh/include/cpu-sh5/cpu/irq.h @@ -111,7 +111,6 @@ #define TOP_PRIORITY 15 extern int intc_evt_to_irq[(0xE20/0x20)+1]; -int intc_irq_describe(char* p, int irq); extern int platform_int_priority[NR_INTC_IRQS]; #endif /* __ASM_SH_CPU_SH5_IRQ_H */ diff --git a/arch/sh/kernel/cpu/irq/intc-sh5.c b/arch/sh/kernel/cpu/irq/intc-sh5.c index 02d8137..a619eaf 100644 --- a/arch/sh/kernel/cpu/irq/intc-sh5.c +++ b/arch/sh/kernel/cpu/irq/intc-sh5.c @@ -160,28 +160,6 @@ void make_intc_irq(unsigned int irq) disable_intc_irq(irq); } -#if defined(CONFIG_PROC_FS) && defined(CONFIG_SYSCTL) -static int IRQ_to_vectorN[NR_INTC_IRQS] = { - 0x12, 0x15, 0x18, 0x1B, 0x40, 0x41, 0x42, 0x43, /* 0- 7 */ - -1, -1, -1, -1, 0x50, 0x51, 0x52, 0x53, /* 8-15 */ - 0x54, 0x55, 0x32, 0x33, 0x34, 0x35, 0x36, -1, /* 16-23 */ - -1, -1, -1, -1, -1, -1, -1, -1, /* 24-31 */ - 0x20, 0x21, 0x22, 0x23, 0x24, 0x25, 0x26, 0x38, /* 32-39 */ - 0x39, 0x3A, 0x3B, -1, -1, -1, -1, -1, /* 40-47 */ - -1, -1, -1, -1, -1, -1, -1, -1, /* 48-55 */ - -1, -1, -1, -1, -1, -1, -1, 0x2B, /* 56-63 */ - -}; - -int intc_irq_describe(char* p, int irq) -{ - if (irq < NR_INTC_IRQS) - return sprintf(p, "(0x%3x)", IRQ_to_vectorN[irq]*0x20); - else - return 0; -} -#endif - void __init plat_irq_setup(void) { unsigned long long __dummy0, __dummy1=~0x00000000100000f0; -- cgit v0.10.2 From 5dafc91fca9135a7b0acb76d9709f4abfad92d6e Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Thu, 7 May 2009 10:17:44 +0000 Subject: sh: sh7785 early scif fix This patch moves the SH4 case of EARLY_SCIF_CONSOLE_PORT so the SH7785 default value gets used. Without this patch the value for SH7785 is set to 0xffe80000. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt diff --git a/arch/sh/Kconfig.debug b/arch/sh/Kconfig.debug index fdb0493..fafa907 100644 --- a/arch/sh/Kconfig.debug +++ b/arch/sh/Kconfig.debug @@ -38,10 +38,10 @@ config EARLY_SCIF_CONSOLE_PORT default "0xffe00000" if CPU_SUBTYPE_SH7780 || CPU_SUBTYPE_SH7763 || \ CPU_SUBTYPE_SH7722 || CPU_SUBTYPE_SH7366 || \ CPU_SUBTYPE_SH7343 - default "0xffe80000" if CPU_SH4 default "0xffea0000" if CPU_SUBTYPE_SH7785 default "0xfffe8000" if CPU_SUBTYPE_SH7203 default "0xfffe9800" if CPU_SUBTYPE_SH7206 || CPU_SUBTYPE_SH7263 + default "0xffe80000" if CPU_SH4 default "0x00000000" config EARLY_PRINTK -- cgit v0.10.2 From b3cacf318172757783d8272fc333284dd4f50140 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Thu, 7 May 2009 10:31:39 +0000 Subject: sh: call clock framework init() callback once Make sure that clk->ops->init() only gets called once in the case of CLK_ALWAYS_ENABLED. Without this patch the init() callback may be called multiple times. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt diff --git a/arch/sh/kernel/cpu/clock.c b/arch/sh/kernel/cpu/clock.c index 1dc8964..099373a 100644 --- a/arch/sh/kernel/cpu/clock.c +++ b/arch/sh/kernel/cpu/clock.c @@ -99,15 +99,18 @@ static int __clk_enable(struct clk *clk) * changes and the clock needs to hunt for the proper set of * divisors to use before it can effectively recalc. */ + + if (clk->flags & CLK_ALWAYS_ENABLED) { + kref_get(&clk->kref); + return 0; + } + if (unlikely(atomic_read(&clk->kref.refcount) == 1)) if (clk->ops && clk->ops->init) clk->ops->init(clk); kref_get(&clk->kref); - if (clk->flags & CLK_ALWAYS_ENABLED) - return 0; - if (likely(clk->ops && clk->ops->enable)) clk->ops->enable(clk); -- cgit v0.10.2 From 06ee846a25642c434c55209151c633f538c12022 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Thu, 7 May 2009 10:44:55 +0000 Subject: sh: r7785 highlander clock fixes Update the r7785 highlander defconfig to fix PCLK value and that mode4 is set high. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt diff --git a/arch/sh/configs/r7785rp_defconfig b/arch/sh/configs/r7785rp_defconfig index 890fe3c..5e677a8 100644 --- a/arch/sh/configs/r7785rp_defconfig +++ b/arch/sh/configs/r7785rp_defconfig @@ -269,7 +269,7 @@ CONFIG_SH_R7785RP=y # CONFIG_SH_TMU=y CONFIG_SH_TIMER_IRQ=28 -CONFIG_SH_PCLK_FREQ=50000000 +CONFIG_SH_PCLK_FREQ=33333333 CONFIG_TICK_ONESHOT=y CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y @@ -333,7 +333,7 @@ CONFIG_GUSA=y CONFIG_ZERO_PAGE_OFFSET=0x00001000 CONFIG_BOOT_LINK_OFFSET=0x00800000 CONFIG_CMDLINE_BOOL=y -CONFIG_CMDLINE="console=ttySC0,115200 root=/dev/sda1" +CONFIG_CMDLINE="console=ttySC0,115200 root=/dev/sda1 mode4_pin=high" # # Bus options -- cgit v0.10.2 From e367592cc93ac653e7bc0bebbc9bb713a77e2696 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Thu, 7 May 2009 10:55:37 +0000 Subject: sh: TMU platform data for sh7785 This patch adds TMU platform data for sh7785. Both clockevent and clocksource support is enabled. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig index 02688d7..b773e7d 100644 --- a/arch/sh/Kconfig +++ b/arch/sh/Kconfig @@ -393,6 +393,7 @@ config CPU_SUBTYPE_SH7785 select CPU_SHX2 select ARCH_SPARSEMEM_ENABLE select SYS_SUPPORTS_NUMA + select SYS_SUPPORTS_TMU config CPU_SUBTYPE_SH7786 bool "Support SH7786 processor" diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7785.c b/arch/sh/kernel/cpu/sh4a/setup-sh7785.c index d80802a..dc5d3e5 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7785.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7785.c @@ -13,8 +13,191 @@ #include #include #include +#include #include +static struct sh_timer_config tmu0_platform_data = { + .name = "TMU0", + .channel_offset = 0x04, + .timer_bit = 0, + .clk = "module_clk", + .clockevent_rating = 200, +}; + +static struct resource tmu0_resources[] = { + [0] = { + .name = "TMU0", + .start = 0xffd80008, + .end = 0xffd80013, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 28, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device tmu0_device = { + .name = "sh_tmu", + .id = 0, + .dev = { + .platform_data = &tmu0_platform_data, + }, + .resource = tmu0_resources, + .num_resources = ARRAY_SIZE(tmu0_resources), +}; + +static struct sh_timer_config tmu1_platform_data = { + .name = "TMU1", + .channel_offset = 0x10, + .timer_bit = 1, + .clk = "module_clk", + .clocksource_rating = 200, +}; + +static struct resource tmu1_resources[] = { + [0] = { + .name = "TMU1", + .start = 0xffd80014, + .end = 0xffd8001f, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 29, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device tmu1_device = { + .name = "sh_tmu", + .id = 1, + .dev = { + .platform_data = &tmu1_platform_data, + }, + .resource = tmu1_resources, + .num_resources = ARRAY_SIZE(tmu1_resources), +}; + +static struct sh_timer_config tmu2_platform_data = { + .name = "TMU2", + .channel_offset = 0x1c, + .timer_bit = 2, + .clk = "module_clk", +}; + +static struct resource tmu2_resources[] = { + [0] = { + .name = "TMU2", + .start = 0xffd80020, + .end = 0xffd8002f, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 30, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device tmu2_device = { + .name = "sh_tmu", + .id = 2, + .dev = { + .platform_data = &tmu2_platform_data, + }, + .resource = tmu2_resources, + .num_resources = ARRAY_SIZE(tmu2_resources), +}; + +static struct sh_timer_config tmu3_platform_data = { + .name = "TMU3", + .channel_offset = 0x04, + .timer_bit = 0, + .clk = "module_clk", +}; + +static struct resource tmu3_resources[] = { + [0] = { + .name = "TMU3", + .start = 0xffdc0008, + .end = 0xffdc0013, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 96, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device tmu3_device = { + .name = "sh_tmu", + .id = 3, + .dev = { + .platform_data = &tmu3_platform_data, + }, + .resource = tmu3_resources, + .num_resources = ARRAY_SIZE(tmu3_resources), +}; + +static struct sh_timer_config tmu4_platform_data = { + .name = "TMU4", + .channel_offset = 0x10, + .timer_bit = 1, + .clk = "module_clk", +}; + +static struct resource tmu4_resources[] = { + [0] = { + .name = "TMU4", + .start = 0xffdc0014, + .end = 0xffdc001f, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 97, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device tmu4_device = { + .name = "sh_tmu", + .id = 4, + .dev = { + .platform_data = &tmu4_platform_data, + }, + .resource = tmu4_resources, + .num_resources = ARRAY_SIZE(tmu4_resources), +}; + +static struct sh_timer_config tmu5_platform_data = { + .name = "TMU5", + .channel_offset = 0x1c, + .timer_bit = 2, + .clk = "module_clk", +}; + +static struct resource tmu5_resources[] = { + [0] = { + .name = "TMU5", + .start = 0xffdc0020, + .end = 0xffdc002b, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 98, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device tmu5_device = { + .name = "sh_tmu", + .id = 5, + .dev = { + .platform_data = &tmu5_platform_data, + }, + .resource = tmu5_resources, + .num_resources = ARRAY_SIZE(tmu5_resources), +}; + static struct plat_sci_port sci_platform_data[] = { { .mapbase = 0xffea0000, @@ -60,6 +243,12 @@ static struct platform_device sci_device = { }; static struct platform_device *sh7785_devices[] __initdata = { + &tmu0_device, + &tmu1_device, + &tmu2_device, + &tmu3_device, + &tmu4_device, + &tmu5_device, &sci_device, }; @@ -70,6 +259,21 @@ static int __init sh7785_devices_setup(void) } __initcall(sh7785_devices_setup); +static struct platform_device *sh7785_early_devices[] __initdata = { + &tmu0_device, + &tmu1_device, + &tmu2_device, + &tmu3_device, + &tmu4_device, + &tmu5_device, +}; + +void __init plat_early_device_setup(void) +{ + early_platform_add_devices(sh7785_early_devices, + ARRAY_SIZE(sh7785_early_devices)); +} + enum { UNUSED = 0, -- cgit v0.10.2 From 4fa48e1774992fd03a4cd83a0f2adecb288c46f8 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Fri, 8 May 2009 15:28:15 +0900 Subject: sh: Enable new TMU driver support for all SH-3 and SH-4 CPUs. The TMU block is supported on all SH-3 and SH-4 subtypes, so just select it there, rather than conditionalizing it per subtype. Signed-off-by: Paul Mundt diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig index b773e7d..88eb118 100644 --- a/arch/sh/Kconfig +++ b/arch/sh/Kconfig @@ -168,6 +168,7 @@ config CPU_SH3 bool select CPU_HAS_INTEVT select CPU_HAS_SR_RB + select SYS_SUPPORTS_TMU config CPU_SH4 bool @@ -175,6 +176,7 @@ config CPU_SH4 select CPU_HAS_SR_RB select CPU_HAS_PTEA if !CPU_SH4A || CPU_SHX2 select CPU_HAS_FPU if !CPU_SH4AL_DSP + select SYS_SUPPORTS_TMU config CPU_SH4A bool @@ -393,7 +395,6 @@ config CPU_SUBTYPE_SH7785 select CPU_SHX2 select ARCH_SPARSEMEM_ENABLE select SYS_SUPPORTS_NUMA - select SYS_SUPPORTS_TMU config CPU_SUBTYPE_SH7786 bool "Support SH7786 processor" @@ -428,7 +429,6 @@ config CPU_SUBTYPE_SH7722 select ARCH_SPARSEMEM_ENABLE select SYS_SUPPORTS_NUMA select SYS_SUPPORTS_CMT - select SYS_SUPPORTS_TMU config CPU_SUBTYPE_SH7366 bool "Support SH7366 processor" -- cgit v0.10.2 From c2ecb4c4a7da16288062a057b693b7b1e16aaf88 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Fri, 8 May 2009 15:39:25 +0900 Subject: sh: Move out rtc-sh registration from time_64.c to setup-sh5.c Now that the onchip_remap() mess is sorted out, the rtc-sh support code for SH-5 can follow the same approach as the other CPUs. Signed-off-by: Paul Mundt diff --git a/arch/sh/kernel/cpu/sh5/setup-sh5.c b/arch/sh/kernel/cpu/sh5/setup-sh5.c index d8d59fe..9a362c8 100644 --- a/arch/sh/kernel/cpu/sh5/setup-sh5.c +++ b/arch/sh/kernel/cpu/sh5/setup-sh5.c @@ -34,8 +34,39 @@ static struct platform_device sci_device = { }, }; +static struct resource rtc_resources[] = { + [0] = { + .start = PHYS_PERIPHERAL_BLOCK + 0x01040000, + .end = PHYS_PERIPHERAL_BLOCK + 0x01040000 + 0x58 - 1, + .flags = IORESOURCE_IO, + }, + [1] = { + /* Period IRQ */ + .start = IRQ_PRI, + .flags = IORESOURCE_IRQ, + }, + [2] = { + /* Carry IRQ */ + .start = IRQ_CUI, + .flags = IORESOURCE_IRQ, + }, + [3] = { + /* Alarm IRQ */ + .start = IRQ_ATI, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device rtc_device = { + .name = "sh-rtc", + .id = -1, + .num_resources = ARRAY_SIZE(rtc_resources), + .resource = rtc_resources, +}; + static struct platform_device *sh5_devices[] __initdata = { &sci_device, + &rtc_device, }; static int __init sh5_devices_setup(void) diff --git a/arch/sh/kernel/time_64.c b/arch/sh/kernel/time_64.c index 7bfeaa0..b4fe770 100644 --- a/arch/sh/kernel/time_64.c +++ b/arch/sh/kernel/time_64.c @@ -46,12 +46,6 @@ #define TMU_TSTR_INIT 1 #define TMU_TSTR_OFF 0 -/* Real Time Clock */ -#define RTC_BLOCK_OFF 0x01040000 -#define RTC_BASE PHYS_PERIPHERAL_BLOCK + RTC_BLOCK_OFF -#define RTC_RCR1_CIE 0x10 /* Carry Interrupt Enable */ -#define RTC_RCR1 (rtc_base + 0x38) - /* Time Management Unit */ #define TMU_BLOCK_OFF 0x01020000 #define TMU_BASE PHYS_PERIPHERAL_BLOCK + TMU_BLOCK_OFF @@ -68,8 +62,7 @@ #define TICK_SIZE (tick_nsec / 1000) -static unsigned long tmu_base, rtc_base; -unsigned long cprc_base; +static unsigned long tmu_base; /* Variables to allow interpolation of time of day to resolution better than a * jiffy. */ @@ -248,11 +241,6 @@ void __init time_init(void) panic("Unable to remap TMU\n"); } - rtc_base = (unsigned long)ioremap_nocache(RTC_BASE, 1024); - if (!rtc_base) { - panic("Unable to remap RTC\n"); - } - clk = clk_get(NULL, "cpu_clk"); scaled_recip_ctc_ticks_per_jiffy = ((1ULL << CTC_JIFFY_SCALE_SHIFT) / (unsigned long long)(clk_get_rate(clk) / HZ)); @@ -274,41 +262,3 @@ void __init time_init(void) ctrl_outl(interval, TMU0_TCNT); ctrl_outb(TMU_TSTR_INIT, TMU_TSTR); } - -static struct resource rtc_resources[] = { - [0] = { - /* RTC base, filled in by rtc_init */ - .flags = IORESOURCE_IO, - }, - [1] = { - /* Period IRQ */ - .start = IRQ_PRI, - .flags = IORESOURCE_IRQ, - }, - [2] = { - /* Carry IRQ */ - .start = IRQ_CUI, - .flags = IORESOURCE_IRQ, - }, - [3] = { - /* Alarm IRQ */ - .start = IRQ_ATI, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device rtc_device = { - .name = "sh-rtc", - .id = -1, - .num_resources = ARRAY_SIZE(rtc_resources), - .resource = rtc_resources, -}; - -static int __init rtc_init(void) -{ - rtc_resources[0].start = rtc_base; - rtc_resources[0].end = rtc_resources[0].start + 0x58 - 1; - - return platform_device_register(&rtc_device); -} -device_initcall(rtc_init); -- cgit v0.10.2 From add47067a8ca324e9d26c4373350dc3cce7f1e7f Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Fri, 8 May 2009 16:12:17 +0900 Subject: sh: Finish the sh64 migration off of ARCH_USES_GETTIMEOFFSET. This adds sh_tmu support to the SH-5 subtypes, which subsequently allows us to kill off time_64.c and use the now generic time_32.c. As a bonus, SH-5 now supports highres timers and tickless for the first time. Signed-off-by: Paul Mundt diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig index 88eb118..ca5c09b 100644 --- a/arch/sh/Kconfig +++ b/arch/sh/Kconfig @@ -141,10 +141,6 @@ config ARCH_NO_VIRT_TO_BUS config ARCH_HAS_DEFAULT_IDLE def_bool y -config ARCH_USES_GETTIMEOFFSET - def_bool y - depends on SUPERH64 - config IO_TRAPPED bool @@ -190,6 +186,7 @@ config CPU_SH4AL_DSP config CPU_SH5 bool select CPU_HAS_FPU + select SYS_SUPPORTS_TMU config CPU_SHX2 bool diff --git a/arch/sh/kernel/Makefile_64 b/arch/sh/kernel/Makefile_64 index d256c77..4667d4c 100644 --- a/arch/sh/kernel/Makefile_64 +++ b/arch/sh/kernel/Makefile_64 @@ -2,7 +2,7 @@ extra-y := head_64.o init_task.o vmlinux.lds obj-y := debugtraps.o idle.o io.o io_generic.o irq.o machvec.o process_64.o \ ptrace_64.o setup.o signal_64.o sys_sh.o sys_sh64.o \ - syscalls_64.o time_64.o topology.o traps.o traps_64.o + syscalls_64.o time_32.o topology.o traps.o traps_64.o obj-y += cpu/ timers/ obj-$(CONFIG_VSYSCALL) += vsyscall/ diff --git a/arch/sh/kernel/cpu/sh5/setup-sh5.c b/arch/sh/kernel/cpu/sh5/setup-sh5.c index 9a362c8..678d69b 100644 --- a/arch/sh/kernel/cpu/sh5/setup-sh5.c +++ b/arch/sh/kernel/cpu/sh5/setup-sh5.c @@ -13,6 +13,7 @@ #include #include #include +#include #include static struct plat_sci_port sci_platform_data[] = { @@ -64,6 +65,110 @@ static struct platform_device rtc_device = { .resource = rtc_resources, }; +#define TMU_BLOCK_OFF 0x01020000 +#define TMU_BASE PHYS_PERIPHERAL_BLOCK + TMU_BLOCK_OFF +#define TMU0_BASE (TMU_BASE + 0x8 + (0xc * 0x0)) +#define TMU1_BASE (TMU_BASE + 0x8 + (0xc * 0x1)) +#define TMU2_BASE (TMU_BASE + 0x8 + (0xc * 0x2)) + +static struct sh_timer_config tmu0_platform_data = { + .name = "TMU0", + .channel_offset = 0x04, + .timer_bit = 0, + .clk = "module_clk", + .clockevent_rating = 200, +}; + +static struct resource tmu0_resources[] = { + [0] = { + .name = "TMU0", + .start = TMU0_BASE, + .end = TMU0_BASE + 0xc - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_TUNI0, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device tmu0_device = { + .name = "sh_tmu", + .id = 0, + .dev = { + .platform_data = &tmu0_platform_data, + }, + .resource = tmu0_resources, + .num_resources = ARRAY_SIZE(tmu0_resources), +}; + +static struct sh_timer_config tmu1_platform_data = { + .name = "TMU1", + .channel_offset = 0x10, + .timer_bit = 1, + .clk = "module_clk", + .clocksource_rating = 200, +}; + +static struct resource tmu1_resources[] = { + [0] = { + .name = "TMU1", + .start = TMU1_BASE, + .end = TMU1_BASE + 0xc - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_TUNI1, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device tmu1_device = { + .name = "sh_tmu", + .id = 1, + .dev = { + .platform_data = &tmu1_platform_data, + }, + .resource = tmu1_resources, + .num_resources = ARRAY_SIZE(tmu1_resources), +}; + +static struct sh_timer_config tmu2_platform_data = { + .name = "TMU2", + .channel_offset = 0x1c, + .timer_bit = 2, + .clk = "module_clk", +}; + +static struct resource tmu2_resources[] = { + [0] = { + .name = "TMU2", + .start = TMU2_BASE, + .end = TMU2_BASE + 0xc - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_TUNI2, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device tmu2_device = { + .name = "sh_tmu", + .id = 2, + .dev = { + .platform_data = &tmu2_platform_data, + }, + .resource = tmu2_resources, + .num_resources = ARRAY_SIZE(tmu2_resources), +}; + +static struct platform_device *sh5_early_devices[] __initdata = { + &tmu0_device, + &tmu1_device, + &tmu2_device, +}; + static struct platform_device *sh5_devices[] __initdata = { &sci_device, &rtc_device, @@ -71,7 +176,20 @@ static struct platform_device *sh5_devices[] __initdata = { static int __init sh5_devices_setup(void) { + int ret; + + ret = platform_add_devices(sh5_early_devices, + ARRAY_SIZE(sh5_early_devices)); + if (unlikely(ret != 0)) + return ret; + return platform_add_devices(sh5_devices, ARRAY_SIZE(sh5_devices)); } __initcall(sh5_devices_setup); + +void __init plat_early_device_setup(void) +{ + early_platform_add_devices(sh5_early_devices, + ARRAY_SIZE(sh5_early_devices)); +} diff --git a/arch/sh/kernel/time_64.c b/arch/sh/kernel/time_64.c deleted file mode 100644 index b4fe770..0000000 --- a/arch/sh/kernel/time_64.c +++ /dev/null @@ -1,264 +0,0 @@ -/* - * arch/sh/kernel/time_64.c - * - * Copyright (C) 2000, 2001 Paolo Alberelli - * Copyright (C) 2003 - 2007 Paul Mundt - * Copyright (C) 2003 Richard Curnow - * - * Original TMU/RTC code taken from sh version. - * Copyright (C) 1999 Tetsuya Okada & Niibe Yutaka - * Some code taken from i386 version. - * Copyright (C) 1991, 1992, 1995 Linus Torvalds - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include /* required by inline __asm__ stmt. */ -#include -#include -#include -#include -#include -#include - -#define TMU_TOCR_INIT 0x00 -#define TMU0_TCR_INIT 0x0020 -#define TMU_TSTR_INIT 1 -#define TMU_TSTR_OFF 0 - -/* Time Management Unit */ -#define TMU_BLOCK_OFF 0x01020000 -#define TMU_BASE PHYS_PERIPHERAL_BLOCK + TMU_BLOCK_OFF -#define TMU0_BASE tmu_base + 0x8 + (0xc * 0x0) -#define TMU1_BASE tmu_base + 0x8 + (0xc * 0x1) -#define TMU2_BASE tmu_base + 0x8 + (0xc * 0x2) - -#define TMU_TOCR tmu_base+0x0 /* Byte access */ -#define TMU_TSTR tmu_base+0x4 /* Byte access */ - -#define TMU0_TCOR TMU0_BASE+0x0 /* Long access */ -#define TMU0_TCNT TMU0_BASE+0x4 /* Long access */ -#define TMU0_TCR TMU0_BASE+0x8 /* Word access */ - -#define TICK_SIZE (tick_nsec / 1000) - -static unsigned long tmu_base; - -/* Variables to allow interpolation of time of day to resolution better than a - * jiffy. */ - -/* This is effectively protected by xtime_lock */ -static unsigned long ctc_last_interrupt; -static unsigned long long usecs_per_jiffy = 1000000/HZ; /* Approximation */ - -#define CTC_JIFFY_SCALE_SHIFT 40 - -/* 2**CTC_JIFFY_SCALE_SHIFT / ctc_ticks_per_jiffy */ -static unsigned long long scaled_recip_ctc_ticks_per_jiffy; - -/* Estimate number of microseconds that have elapsed since the last timer tick, - by scaling the delta that has occurred in the CTC register. - - WARNING WARNING WARNING : This algorithm relies on the CTC decrementing at - the CPU clock rate. If the CPU sleeps, the CTC stops counting. Bear this - in mind if enabling SLEEP_WORKS in process.c. In that case, this algorithm - probably needs to use TMU.TCNT0 instead. This will work even if the CPU is - sleeping, though will be coarser. - - FIXME : What if usecs_per_tick is moving around too much, e.g. if an adjtime - is running or if the freq or tick arguments of adjtimex are modified after - we have calibrated the scaling factor? This will result in either a jump at - the end of a tick period, or a wrap backwards at the start of the next one, - if the application is reading the time of day often enough. I think we - ought to do better than this. For this reason, usecs_per_jiffy is left - separated out in the calculation below. This allows some future hook into - the adjtime-related stuff in kernel/timer.c to remove this hazard. - -*/ - -static unsigned long usecs_since_tick(void) -{ - unsigned long long current_ctc; - long ctc_ticks_since_interrupt; - unsigned long long ull_ctc_ticks_since_interrupt; - unsigned long result; - - unsigned long long mul1_out; - unsigned long long mul1_out_high; - unsigned long long mul2_out_low, mul2_out_high; - - /* Read CTC register */ - asm ("getcon cr62, %0" : "=r" (current_ctc)); - /* Note, the CTC counts down on each CPU clock, not up. - Note(2), use long type to get correct wraparound arithmetic when - the counter crosses zero. */ - ctc_ticks_since_interrupt = (long) ctc_last_interrupt - (long) current_ctc; - ull_ctc_ticks_since_interrupt = (unsigned long long) ctc_ticks_since_interrupt; - - /* Inline assembly to do 32x32x32->64 multiplier */ - asm volatile ("mulu.l %1, %2, %0" : - "=r" (mul1_out) : - "r" (ull_ctc_ticks_since_interrupt), "r" (usecs_per_jiffy)); - - mul1_out_high = mul1_out >> 32; - - asm volatile ("mulu.l %1, %2, %0" : - "=r" (mul2_out_low) : - "r" (mul1_out), "r" (scaled_recip_ctc_ticks_per_jiffy)); - -#if 1 - asm volatile ("mulu.l %1, %2, %0" : - "=r" (mul2_out_high) : - "r" (mul1_out_high), "r" (scaled_recip_ctc_ticks_per_jiffy)); -#endif - - result = (unsigned long) (((mul2_out_high << 32) + mul2_out_low) >> CTC_JIFFY_SCALE_SHIFT); - - return result; -} - -u32 arch_gettimeoffset(void) -{ - return usecs_since_tick() * 1000; -} - -/* Dummy RTC ops */ -static void null_rtc_get_time(struct timespec *tv) -{ - tv->tv_sec = mktime(2000, 1, 1, 0, 0, 0); - tv->tv_nsec = 0; -} - -static int null_rtc_set_time(const time_t secs) -{ - return 0; -} - -void (*rtc_sh_get_time)(struct timespec *) = null_rtc_get_time; -int (*rtc_sh_set_time)(const time_t) = null_rtc_set_time; - -/* last time the RTC clock got updated */ -static long last_rtc_update; - -/* - * timer_interrupt() needs to keep up the real-time clock, - * as well as call the "do_timer()" routine every clocktick - */ -static inline void do_timer_interrupt(void) -{ - unsigned long long current_ctc; - - if (current->pid) - profile_tick(CPU_PROFILING); - - /* - * Here we are in the timer irq handler. We just have irqs locally - * disabled but we don't know if the timer_bh is running on the other - * CPU. We need to avoid to SMP race with it. NOTE: we don' t need - * the irq version of write_lock because as just said we have irq - * locally disabled. -arca - */ - write_seqlock(&xtime_lock); - asm ("getcon cr62, %0" : "=r" (current_ctc)); - ctc_last_interrupt = (unsigned long) current_ctc; - - do_timer(1); - - /* - * If we have an externally synchronized Linux clock, then update - * RTC clock accordingly every ~11 minutes. Set_rtc_mmss() has to be - * called as close as possible to 500 ms before the new second starts. - */ - if (ntp_synced() && - xtime.tv_sec > last_rtc_update + 660 && - (xtime.tv_nsec / 1000) >= 500000 - ((unsigned) TICK_SIZE) / 2 && - (xtime.tv_nsec / 1000) <= 500000 + ((unsigned) TICK_SIZE) / 2) { - if (rtc_sh_set_time(xtime.tv_sec) == 0) - last_rtc_update = xtime.tv_sec; - else - /* do it again in 60 s */ - last_rtc_update = xtime.tv_sec - 600; - } - write_sequnlock(&xtime_lock); - -#ifndef CONFIG_SMP - update_process_times(user_mode(get_irq_regs())); -#endif -} - -/* - * This is the same as the above, except we _also_ save the current - * Time Stamp Counter value at the time of the timer interrupt, so that - * we later on can estimate the time of day more exactly. - */ -static irqreturn_t timer_interrupt(int irq, void *dev_id) -{ - unsigned long timer_status; - - /* Clear UNF bit */ - timer_status = ctrl_inw(TMU0_TCR); - timer_status &= ~0x100; - ctrl_outw(timer_status, TMU0_TCR); - - do_timer_interrupt(); - - return IRQ_HANDLED; -} - -static struct irqaction irq0 = { - .handler = timer_interrupt, - .flags = IRQF_DISABLED, - .name = "timer", -}; - -void __init time_init(void) -{ - unsigned long interval; - struct clk *clk; - - tmu_base = (unsigned long)ioremap_nocache(TMU_BASE, 1024); - if (!tmu_base) { - panic("Unable to remap TMU\n"); - } - - clk = clk_get(NULL, "cpu_clk"); - scaled_recip_ctc_ticks_per_jiffy = ((1ULL << CTC_JIFFY_SCALE_SHIFT) / - (unsigned long long)(clk_get_rate(clk) / HZ)); - - rtc_sh_get_time(&xtime); - - setup_irq(TIMER_IRQ, &irq0); - - clk = clk_get(NULL, "module_clk"); - interval = (clk_get_rate(clk)/(HZ*4)); - - printk("Interval = %ld\n", interval); - - /* Start TMU0 */ - ctrl_outb(TMU_TSTR_OFF, TMU_TSTR); - ctrl_outb(TMU_TOCR_INIT, TMU_TOCR); - ctrl_outw(TMU0_TCR_INIT, TMU0_TCR); - ctrl_outl(interval, TMU0_TCOR); - ctrl_outl(interval, TMU0_TCNT); - ctrl_outb(TMU_TSTR_INIT, TMU_TSTR); -} -- cgit v0.10.2 From b179b72fad5c88c3b616fb88a9ae7cbbc1a750d3 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Fri, 8 May 2009 16:17:36 +0900 Subject: sh: Rename arch/sh/kernel/time_32.c to arch/sh/kernel/time.c. This is now fully generic, and used both by _32 and _64 variants. Rename it accordingly. Signed-off-by: Paul Mundt diff --git a/arch/sh/kernel/Makefile_32 b/arch/sh/kernel/Makefile_32 index 5b1d4d0..aee08af 100644 --- a/arch/sh/kernel/Makefile_32 +++ b/arch/sh/kernel/Makefile_32 @@ -11,7 +11,7 @@ endif obj-y := debugtraps.o idle.o io.o io_generic.o irq.o \ machvec.o process_32.o ptrace_32.o setup.o signal_32.o \ - sys_sh.o sys_sh32.o syscalls_32.o time_32.o topology.o \ + sys_sh.o sys_sh32.o syscalls_32.o time.o topology.o \ traps.o traps_32.o obj-y += cpu/ timers/ diff --git a/arch/sh/kernel/Makefile_64 b/arch/sh/kernel/Makefile_64 index 4667d4c..31f6ebf 100644 --- a/arch/sh/kernel/Makefile_64 +++ b/arch/sh/kernel/Makefile_64 @@ -2,7 +2,7 @@ extra-y := head_64.o init_task.o vmlinux.lds obj-y := debugtraps.o idle.o io.o io_generic.o irq.o machvec.o process_64.o \ ptrace_64.o setup.o signal_64.o sys_sh.o sys_sh64.o \ - syscalls_64.o time_32.o topology.o traps.o traps_64.o + syscalls_64.o time.o topology.o traps.o traps_64.o obj-y += cpu/ timers/ obj-$(CONFIG_VSYSCALL) += vsyscall/ diff --git a/arch/sh/kernel/time.c b/arch/sh/kernel/time.c new file mode 100644 index 0000000..d41ca4c --- /dev/null +++ b/arch/sh/kernel/time.c @@ -0,0 +1,231 @@ +/* + * arch/sh/kernel/time_32.c + * + * Copyright (C) 1999 Tetsuya Okada & Niibe Yutaka + * Copyright (C) 2000 Philipp Rumpf + * Copyright (C) 2002 - 2009 Paul Mundt + * Copyright (C) 2002 M. R. Brown + * + * Some code taken from i386 version. + * Copyright (C) 1991, 1992, 1995 Linus Torvalds + */ +#include +#include +#include +#include +#include +#include +#include +#include /* for rtc_lock */ +#include +#include +#include +#include +#include +#include +#include + +struct sys_timer *sys_timer; + +/* Move this somewhere more sensible.. */ +DEFINE_SPINLOCK(rtc_lock); +EXPORT_SYMBOL(rtc_lock); + +/* Dummy RTC ops */ +static void null_rtc_get_time(struct timespec *tv) +{ + tv->tv_sec = mktime(2000, 1, 1, 0, 0, 0); + tv->tv_nsec = 0; +} + +static int null_rtc_set_time(const time_t secs) +{ + return 0; +} + +void (*rtc_sh_get_time)(struct timespec *) = null_rtc_get_time; +int (*rtc_sh_set_time)(const time_t) = null_rtc_set_time; + +unsigned int get_rtc_time(struct rtc_time *tm) +{ + if (rtc_sh_get_time != null_rtc_get_time) { + struct timespec tv; + + rtc_sh_get_time(&tv); + rtc_time_to_tm(tv.tv_sec, tm); + } + + return RTC_24H; +} +EXPORT_SYMBOL(get_rtc_time); + +int set_rtc_time(struct rtc_time *tm) +{ + unsigned long secs; + + rtc_tm_to_time(tm, &secs); + return rtc_sh_set_time(secs); +} +EXPORT_SYMBOL(set_rtc_time); + +static int __init rtc_generic_init(void) +{ + struct platform_device *pdev; + + if (rtc_sh_get_time == null_rtc_get_time) + return -ENODEV; + + pdev = platform_device_register_simple("rtc-generic", -1, NULL, 0); + if (IS_ERR(pdev)) + return PTR_ERR(pdev); + + return 0; +} +module_init(rtc_generic_init); + +/* last time the RTC clock got updated */ +static long last_rtc_update; + +/* + * handle_timer_tick() needs to keep up the real-time clock, + * as well as call the "do_timer()" routine every clocktick + */ +void handle_timer_tick(void) +{ + if (current->pid) + profile_tick(CPU_PROFILING); + + /* + * Here we are in the timer irq handler. We just have irqs locally + * disabled but we don't know if the timer_bh is running on the other + * CPU. We need to avoid to SMP race with it. NOTE: we don' t need + * the irq version of write_lock because as just said we have irq + * locally disabled. -arca + */ + write_seqlock(&xtime_lock); + do_timer(1); + + /* + * If we have an externally synchronized Linux clock, then update + * RTC clock accordingly every ~11 minutes. Set_rtc_mmss() has to be + * called as close as possible to 500 ms before the new second starts. + */ + if (ntp_synced() && + xtime.tv_sec > last_rtc_update + 660 && + (xtime.tv_nsec / 1000) >= 500000 - ((unsigned) TICK_SIZE) / 2 && + (xtime.tv_nsec / 1000) <= 500000 + ((unsigned) TICK_SIZE) / 2) { + if (rtc_sh_set_time(xtime.tv_sec) == 0) + last_rtc_update = xtime.tv_sec; + else + /* do it again in 60s */ + last_rtc_update = xtime.tv_sec - 600; + } + write_sequnlock(&xtime_lock); + +#ifndef CONFIG_SMP + update_process_times(user_mode(get_irq_regs())); +#endif +} + +#ifdef CONFIG_PM +int timer_suspend(struct sys_device *dev, pm_message_t state) +{ + struct sys_timer *sys_timer = container_of(dev, struct sys_timer, dev); + + sys_timer->ops->stop(); + + return 0; +} + +int timer_resume(struct sys_device *dev) +{ + struct sys_timer *sys_timer = container_of(dev, struct sys_timer, dev); + + sys_timer->ops->start(); + + return 0; +} +#else +#define timer_suspend NULL +#define timer_resume NULL +#endif + +static struct sysdev_class timer_sysclass = { + .name = "timer", + .suspend = timer_suspend, + .resume = timer_resume, +}; + +static int __init timer_init_sysfs(void) +{ + int ret; + + if (!sys_timer) + return 0; + + ret = sysdev_class_register(&timer_sysclass); + if (ret != 0) + return ret; + + sys_timer->dev.cls = &timer_sysclass; + return sysdev_register(&sys_timer->dev); +} +device_initcall(timer_init_sysfs); + +void (*board_time_init)(void); + +struct clocksource clocksource_sh = { + .name = "SuperH", +}; + +unsigned long long sched_clock(void) +{ + unsigned long long cycles; + + /* jiffies based sched_clock if no clocksource is installed */ + if (!clocksource_sh.rating) + return (unsigned long long)jiffies * (NSEC_PER_SEC / HZ); + + cycles = clocksource_sh.read(&clocksource_sh); + return cyc2ns(&clocksource_sh, cycles); +} + +static void __init sh_late_time_init(void) +{ + /* + * Make sure all compiled-in early timers register themselves. + * Run probe() for one "earlytimer" device. + */ + early_platform_driver_register_all("earlytimer"); + if (early_platform_driver_probe("earlytimer", 1, 0)) + return; + + /* + * Find the timer to use as the system timer, it will be + * initialized for us. + */ + sys_timer = get_sys_timer(); + if (unlikely(!sys_timer)) + panic("System timer missing.\n"); + + printk(KERN_INFO "Using %s for system timer\n", sys_timer->name); +} + +void __init time_init(void) +{ + if (board_time_init) + board_time_init(); + + clk_init(); + + rtc_sh_get_time(&xtime); + set_normalized_timespec(&wall_to_monotonic, + -xtime.tv_sec, -xtime.tv_nsec); + +#ifdef CONFIG_GENERIC_CLOCKEVENTS_BROADCAST + local_timer_setup(smp_processor_id()); +#endif + + late_time_init = sh_late_time_init; +} + diff --git a/arch/sh/kernel/time_32.c b/arch/sh/kernel/time_32.c deleted file mode 100644 index d41ca4c..0000000 --- a/arch/sh/kernel/time_32.c +++ /dev/null @@ -1,231 +0,0 @@ -/* - * arch/sh/kernel/time_32.c - * - * Copyright (C) 1999 Tetsuya Okada & Niibe Yutaka - * Copyright (C) 2000 Philipp Rumpf - * Copyright (C) 2002 - 2009 Paul Mundt - * Copyright (C) 2002 M. R. Brown - * - * Some code taken from i386 version. - * Copyright (C) 1991, 1992, 1995 Linus Torvalds - */ -#include -#include -#include -#include -#include -#include -#include -#include /* for rtc_lock */ -#include -#include -#include -#include -#include -#include -#include - -struct sys_timer *sys_timer; - -/* Move this somewhere more sensible.. */ -DEFINE_SPINLOCK(rtc_lock); -EXPORT_SYMBOL(rtc_lock); - -/* Dummy RTC ops */ -static void null_rtc_get_time(struct timespec *tv) -{ - tv->tv_sec = mktime(2000, 1, 1, 0, 0, 0); - tv->tv_nsec = 0; -} - -static int null_rtc_set_time(const time_t secs) -{ - return 0; -} - -void (*rtc_sh_get_time)(struct timespec *) = null_rtc_get_time; -int (*rtc_sh_set_time)(const time_t) = null_rtc_set_time; - -unsigned int get_rtc_time(struct rtc_time *tm) -{ - if (rtc_sh_get_time != null_rtc_get_time) { - struct timespec tv; - - rtc_sh_get_time(&tv); - rtc_time_to_tm(tv.tv_sec, tm); - } - - return RTC_24H; -} -EXPORT_SYMBOL(get_rtc_time); - -int set_rtc_time(struct rtc_time *tm) -{ - unsigned long secs; - - rtc_tm_to_time(tm, &secs); - return rtc_sh_set_time(secs); -} -EXPORT_SYMBOL(set_rtc_time); - -static int __init rtc_generic_init(void) -{ - struct platform_device *pdev; - - if (rtc_sh_get_time == null_rtc_get_time) - return -ENODEV; - - pdev = platform_device_register_simple("rtc-generic", -1, NULL, 0); - if (IS_ERR(pdev)) - return PTR_ERR(pdev); - - return 0; -} -module_init(rtc_generic_init); - -/* last time the RTC clock got updated */ -static long last_rtc_update; - -/* - * handle_timer_tick() needs to keep up the real-time clock, - * as well as call the "do_timer()" routine every clocktick - */ -void handle_timer_tick(void) -{ - if (current->pid) - profile_tick(CPU_PROFILING); - - /* - * Here we are in the timer irq handler. We just have irqs locally - * disabled but we don't know if the timer_bh is running on the other - * CPU. We need to avoid to SMP race with it. NOTE: we don' t need - * the irq version of write_lock because as just said we have irq - * locally disabled. -arca - */ - write_seqlock(&xtime_lock); - do_timer(1); - - /* - * If we have an externally synchronized Linux clock, then update - * RTC clock accordingly every ~11 minutes. Set_rtc_mmss() has to be - * called as close as possible to 500 ms before the new second starts. - */ - if (ntp_synced() && - xtime.tv_sec > last_rtc_update + 660 && - (xtime.tv_nsec / 1000) >= 500000 - ((unsigned) TICK_SIZE) / 2 && - (xtime.tv_nsec / 1000) <= 500000 + ((unsigned) TICK_SIZE) / 2) { - if (rtc_sh_set_time(xtime.tv_sec) == 0) - last_rtc_update = xtime.tv_sec; - else - /* do it again in 60s */ - last_rtc_update = xtime.tv_sec - 600; - } - write_sequnlock(&xtime_lock); - -#ifndef CONFIG_SMP - update_process_times(user_mode(get_irq_regs())); -#endif -} - -#ifdef CONFIG_PM -int timer_suspend(struct sys_device *dev, pm_message_t state) -{ - struct sys_timer *sys_timer = container_of(dev, struct sys_timer, dev); - - sys_timer->ops->stop(); - - return 0; -} - -int timer_resume(struct sys_device *dev) -{ - struct sys_timer *sys_timer = container_of(dev, struct sys_timer, dev); - - sys_timer->ops->start(); - - return 0; -} -#else -#define timer_suspend NULL -#define timer_resume NULL -#endif - -static struct sysdev_class timer_sysclass = { - .name = "timer", - .suspend = timer_suspend, - .resume = timer_resume, -}; - -static int __init timer_init_sysfs(void) -{ - int ret; - - if (!sys_timer) - return 0; - - ret = sysdev_class_register(&timer_sysclass); - if (ret != 0) - return ret; - - sys_timer->dev.cls = &timer_sysclass; - return sysdev_register(&sys_timer->dev); -} -device_initcall(timer_init_sysfs); - -void (*board_time_init)(void); - -struct clocksource clocksource_sh = { - .name = "SuperH", -}; - -unsigned long long sched_clock(void) -{ - unsigned long long cycles; - - /* jiffies based sched_clock if no clocksource is installed */ - if (!clocksource_sh.rating) - return (unsigned long long)jiffies * (NSEC_PER_SEC / HZ); - - cycles = clocksource_sh.read(&clocksource_sh); - return cyc2ns(&clocksource_sh, cycles); -} - -static void __init sh_late_time_init(void) -{ - /* - * Make sure all compiled-in early timers register themselves. - * Run probe() for one "earlytimer" device. - */ - early_platform_driver_register_all("earlytimer"); - if (early_platform_driver_probe("earlytimer", 1, 0)) - return; - - /* - * Find the timer to use as the system timer, it will be - * initialized for us. - */ - sys_timer = get_sys_timer(); - if (unlikely(!sys_timer)) - panic("System timer missing.\n"); - - printk(KERN_INFO "Using %s for system timer\n", sys_timer->name); -} - -void __init time_init(void) -{ - if (board_time_init) - board_time_init(); - - clk_init(); - - rtc_sh_get_time(&xtime); - set_normalized_timespec(&wall_to_monotonic, - -xtime.tv_sec, -xtime.tv_nsec); - -#ifdef CONFIG_GENERIC_CLOCKEVENTS_BROADCAST - local_timer_setup(smp_processor_id()); -#endif - - late_time_init = sh_late_time_init; -} - -- cgit v0.10.2 From 6d134b9e8d3f32331ad2faca2db8186f54198931 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Fri, 8 May 2009 16:36:13 +0900 Subject: sh: Wire up GENERIC_CMOS_UPDATE for the platforms that need it. Now that everything has converted over to generic timekeeping, we need an alternate method for keeping the RTC updated for those platforms that are still using the rtc_sh_get/set_time pairs, presently limited to SH-03 and the Dreamcast. This wires up the GENERIC_CMOS_UPDATE hooks for those to maintain the same behaviour. Signed-off-by: Paul Mundt diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig index ca5c09b..d88a61b 100644 --- a/arch/sh/Kconfig +++ b/arch/sh/Kconfig @@ -83,6 +83,10 @@ config GENERIC_CLOCKEVENTS config GENERIC_CLOCKEVENTS_BROADCAST bool +config GENERIC_CMOS_UPDATE + def_bool y + depends on SH_SH03 || SH_DREAMCAST + config GENERIC_LOCKBREAK def_bool y depends on SMP && PREEMPT diff --git a/arch/sh/kernel/time.c b/arch/sh/kernel/time.c index d41ca4c..77b841a 100644 --- a/arch/sh/kernel/time.c +++ b/arch/sh/kernel/time.c @@ -46,6 +46,20 @@ static int null_rtc_set_time(const time_t secs) void (*rtc_sh_get_time)(struct timespec *) = null_rtc_get_time; int (*rtc_sh_set_time)(const time_t) = null_rtc_set_time; +#ifdef CONFIG_GENERIC_CMOS_UPDATE +unsigned long read_persistent_clock(void) +{ + struct timespec tv; + rtc_sh_get_time(&tv); + return tv.tv_sec; +} + +int update_persistent_clock(struct timespec now) +{ + return rtc_sh_set_time(now.tv_sec); +} +#endif + unsigned int get_rtc_time(struct rtc_time *tm) { if (rtc_sh_get_time != null_rtc_get_time) { -- cgit v0.10.2 From 5ac5496411b30d41945a996fe7a7fb5abccf2aaa Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Fri, 8 May 2009 16:44:00 +0900 Subject: sh: Kill off dead handle_timer_tick() code. Nothing is using this anymore now that we have fully converted to generic time, so kill it off completely. Signed-off-by: Paul Mundt diff --git a/arch/sh/include/asm/timer.h b/arch/sh/include/asm/timer.h index cb16645..6c08511 100644 --- a/arch/sh/include/asm/timer.h +++ b/arch/sh/include/asm/timer.h @@ -18,17 +18,12 @@ struct sys_timer { struct sys_timer_ops *ops; }; -#define TICK_SIZE (tick_nsec / 1000) - extern struct sys_timer tmu_timer; extern struct sys_timer *sys_timer; /* arch/sh/kernel/timers/timer.c */ struct sys_timer *get_sys_timer(void); -/* arch/sh/kernel/time.c */ -void handle_timer_tick(void); - extern struct clocksource clocksource_sh; #endif /* __ASM_SH_TIMER_H */ diff --git a/arch/sh/kernel/time.c b/arch/sh/kernel/time.c index 77b841a..f4c304a 100644 --- a/arch/sh/kernel/time.c +++ b/arch/sh/kernel/time.c @@ -1,13 +1,14 @@ /* - * arch/sh/kernel/time_32.c + * arch/sh/kernel/time.c * * Copyright (C) 1999 Tetsuya Okada & Niibe Yutaka * Copyright (C) 2000 Philipp Rumpf * Copyright (C) 2002 - 2009 Paul Mundt * Copyright (C) 2002 M. R. Brown * - * Some code taken from i386 version. - * Copyright (C) 1991, 1992, 1995 Linus Torvalds + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. */ #include #include @@ -23,7 +24,6 @@ #include #include #include -#include struct sys_timer *sys_timer; @@ -97,50 +97,6 @@ static int __init rtc_generic_init(void) } module_init(rtc_generic_init); -/* last time the RTC clock got updated */ -static long last_rtc_update; - -/* - * handle_timer_tick() needs to keep up the real-time clock, - * as well as call the "do_timer()" routine every clocktick - */ -void handle_timer_tick(void) -{ - if (current->pid) - profile_tick(CPU_PROFILING); - - /* - * Here we are in the timer irq handler. We just have irqs locally - * disabled but we don't know if the timer_bh is running on the other - * CPU. We need to avoid to SMP race with it. NOTE: we don' t need - * the irq version of write_lock because as just said we have irq - * locally disabled. -arca - */ - write_seqlock(&xtime_lock); - do_timer(1); - - /* - * If we have an externally synchronized Linux clock, then update - * RTC clock accordingly every ~11 minutes. Set_rtc_mmss() has to be - * called as close as possible to 500 ms before the new second starts. - */ - if (ntp_synced() && - xtime.tv_sec > last_rtc_update + 660 && - (xtime.tv_nsec / 1000) >= 500000 - ((unsigned) TICK_SIZE) / 2 && - (xtime.tv_nsec / 1000) <= 500000 + ((unsigned) TICK_SIZE) / 2) { - if (rtc_sh_set_time(xtime.tv_sec) == 0) - last_rtc_update = xtime.tv_sec; - else - /* do it again in 60s */ - last_rtc_update = xtime.tv_sec - 600; - } - write_sequnlock(&xtime_lock); - -#ifndef CONFIG_SMP - update_process_times(user_mode(get_irq_regs())); -#endif -} - #ifdef CONFIG_PM int timer_suspend(struct sys_device *dev, pm_message_t state) { @@ -242,4 +198,3 @@ void __init time_init(void) late_time_init = sh_late_time_init; } - -- cgit v0.10.2 From 6459d7bb72e9767bc7d22f2ee44aab35188e4b8a Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Fri, 8 May 2009 16:47:48 +0900 Subject: sh: Kill off dead timer sysclass pm hooks. With the conversion to generic clockevents these are completely unused, so just kill it off. Signed-off-by: Paul Mundt diff --git a/arch/sh/kernel/time.c b/arch/sh/kernel/time.c index f4c304a..c26576a 100644 --- a/arch/sh/kernel/time.c +++ b/arch/sh/kernel/time.c @@ -97,51 +97,6 @@ static int __init rtc_generic_init(void) } module_init(rtc_generic_init); -#ifdef CONFIG_PM -int timer_suspend(struct sys_device *dev, pm_message_t state) -{ - struct sys_timer *sys_timer = container_of(dev, struct sys_timer, dev); - - sys_timer->ops->stop(); - - return 0; -} - -int timer_resume(struct sys_device *dev) -{ - struct sys_timer *sys_timer = container_of(dev, struct sys_timer, dev); - - sys_timer->ops->start(); - - return 0; -} -#else -#define timer_suspend NULL -#define timer_resume NULL -#endif - -static struct sysdev_class timer_sysclass = { - .name = "timer", - .suspend = timer_suspend, - .resume = timer_resume, -}; - -static int __init timer_init_sysfs(void) -{ - int ret; - - if (!sys_timer) - return 0; - - ret = sysdev_class_register(&timer_sysclass); - if (ret != 0) - return ret; - - sys_timer->dev.cls = &timer_sysclass; - return sysdev_register(&sys_timer->dev); -} -device_initcall(timer_init_sysfs); - void (*board_time_init)(void); struct clocksource clocksource_sh = { -- cgit v0.10.2 From cd1408f22d2fd8f0d09c082b07cf0b9bcfb6eac9 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Fri, 8 May 2009 16:57:35 +0900 Subject: sh: mach-sh03: Give the sh03 rtc its own spinlock. This converts the sh03 rtc code off of using the global rtc_lock and on to its own spinlock. There are no other possible users of the rtc_lock, so serializing with it is not necessary. Signed-off-by: Paul Mundt diff --git a/arch/sh/boards/mach-sh03/rtc.c b/arch/sh/boards/mach-sh03/rtc.c index 0a9266b..a8b9f84 100644 --- a/arch/sh/boards/mach-sh03/rtc.c +++ b/arch/sh/boards/mach-sh03/rtc.c @@ -35,13 +35,13 @@ #define RTC_BUSY 1 #define RTC_STOP 2 -extern spinlock_t rtc_lock; +static DEFINE_SPINLOCK(sh03_rtc_lock); unsigned long get_cmos_time(void) { unsigned int year, mon, day, hour, min, sec; - spin_lock(&rtc_lock); + spin_lock(&sh03_rtc_lock); again: do { sec = (ctrl_inb(RTC_SEC1) & 0xf) + (ctrl_inb(RTC_SEC10) & 0x7) * 10; @@ -73,7 +73,7 @@ unsigned long get_cmos_time(void) goto again; } - spin_unlock(&rtc_lock); + spin_unlock(&sh03_rtc_lock); return mktime(year, mon, day, hour, min, sec); } @@ -91,7 +91,7 @@ static int set_rtc_mmss(unsigned long nowtime) int i; /* gets recalled with irq locally disabled */ - spin_lock(&rtc_lock); + spin_lock(&sh03_rtc_lock); for (i = 0 ; i < 1000000 ; i++) /* may take up to 1 second... */ if (!(ctrl_inb(RTC_CTL) & RTC_BUSY)) break; @@ -113,7 +113,7 @@ static int set_rtc_mmss(unsigned long nowtime) cmos_minutes, real_minutes); retval = -1; } - spin_unlock(&rtc_lock); + spin_unlock(&sh03_rtc_lock); return retval; } -- cgit v0.10.2 From 1af2fe45fec15bdba446c22b9b602699cdabfc9f Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Fri, 8 May 2009 16:59:05 +0900 Subject: sh: Kill off the global rtc_lock with extreme prejudice. Now that all of the possible users for rtc_lock have gone away, it is no longer necessary to keep this lock definition around. This follows several other architectures that have either recently dropped it or never supported it in the first place. Signed-off-by: Paul Mundt diff --git a/arch/sh/kernel/time.c b/arch/sh/kernel/time.c index c26576a..e0aa769 100644 --- a/arch/sh/kernel/time.c +++ b/arch/sh/kernel/time.c @@ -17,7 +17,6 @@ #include #include #include -#include /* for rtc_lock */ #include #include #include @@ -27,10 +26,6 @@ struct sys_timer *sys_timer; -/* Move this somewhere more sensible.. */ -DEFINE_SPINLOCK(rtc_lock); -EXPORT_SYMBOL(rtc_lock); - /* Dummy RTC ops */ static void null_rtc_get_time(struct timespec *tv) { -- cgit v0.10.2 From cb3a86c89ebdf917b88665f70e06863986fbab5c Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Fri, 8 May 2009 17:25:35 +0900 Subject: sh: Kill off sh64's hand-rolled syscall tracer. This is no longer necessary, as there are now sufficient generic alternatives available. Signed-off-by: Paul Mundt diff --git a/arch/sh/Kconfig.debug b/arch/sh/Kconfig.debug index fafa907..44627ef 100644 --- a/arch/sh/Kconfig.debug +++ b/arch/sh/Kconfig.debug @@ -137,12 +137,4 @@ config SH64_SR_WATCH bool "Debug: set SR.WATCH to enable hardware watchpoints and trace" depends on SUPERH64 -config POOR_MANS_STRACE - bool "Debug: enable rudimentary strace facility" - depends on SUPERH64 - help - This option allows system calls to be traced to the console. It also - aids in detecting kernel stack underflow. It is useful for debugging - early-userland problems (e.g. init incurring fatal exceptions.) - endmenu diff --git a/arch/sh/Makefile b/arch/sh/Makefile index bece1f7..493da97 100644 --- a/arch/sh/Makefile +++ b/arch/sh/Makefile @@ -193,7 +193,7 @@ zImage uImage uImage.srec vmlinux.srec: vmlinux compressed: zImage -archprepare: maketools arch/sh/lib64/syscalltab.h +archprepare: maketools archclean: $(Q)$(MAKE) $(clean)=$(boot) @@ -205,34 +205,4 @@ define archhelp @echo ' uImage.srec - Create an S-record for U-Boot' endef -define filechk_gen-syscalltab - (set -e; \ - echo "/*"; \ - echo " * DO NOT MODIFY."; \ - echo " *"; \ - echo " * This file was generated by arch/sh/Makefile"; \ - echo " * Any changes will be reverted at build time."; \ - echo " */"; \ - echo ""; \ - echo "#ifndef __SYSCALLTAB_H"; \ - echo "#define __SYSCALLTAB_H"; \ - echo ""; \ - echo "#include "; \ - echo ""; \ - echo "struct syscall_info {"; \ - echo " const char *name;"; \ - echo "} syscall_info_table[] = {"; \ - sed -e '/^.*\.long /!d;s// { "/;s/\(\([^/]*\)\/\)\{1\}.*/\2/; \ - s/[ \t]*$$//g;s/$$/" },/;s/\("\)sys_/\1/g'; \ - echo "};"; \ - echo ""; \ - echo "#define NUM_SYSCALL_INFO_ENTRIES ARRAY_SIZE(syscall_info_table)";\ - echo ""; \ - echo "#endif /* __SYSCALLTAB_H */" ) -endef - -arch/sh/lib64/syscalltab.h: arch/sh/kernel/syscalls_64.S - $(call filechk,gen-syscalltab) - -CLEAN_FILES += arch/sh/lib64/syscalltab.h \ - include/asm-sh/machtypes.h +CLEAN_FILES += include/asm-sh/machtypes.h diff --git a/arch/sh/kernel/cpu/sh5/entry.S b/arch/sh/kernel/cpu/sh5/entry.S index 5162975..b0aacf6 100644 --- a/arch/sh/kernel/cpu/sh5/entry.S +++ b/arch/sh/kernel/cpu/sh5/entry.S @@ -812,27 +812,6 @@ no_underflow: ! exceptions add SP, ZERO, r14 -#ifdef CONFIG_POOR_MANS_STRACE - /* We've pushed all the registers now, so only r2-r4 hold anything - * useful. Move them into callee save registers */ - or r2, ZERO, r28 - or r3, ZERO, r29 - or r4, ZERO, r30 - - /* Preserve r2 as the event code */ - movi evt_debug, r3 - ori r3, 1, r3 - ptabs r3, tr0 - - or SP, ZERO, r6 - getcon TRA, r5 - blink tr0, LINK - - or r28, ZERO, r2 - or r29, ZERO, r3 - or r30, ZERO, r4 -#endif - /* For syscall and debug race condition, get TRA now */ getcon TRA, r5 @@ -887,11 +866,6 @@ no_underflow: */ .global ret_from_irq ret_from_irq: -#ifdef CONFIG_POOR_MANS_STRACE - pta evt_debug_ret_from_irq, tr0 - ori SP, 0, r2 - blink tr0, LINK -#endif ld.q SP, FRAME_S(FSSR), r6 shlri r6, 30, r6 andi r6, 1, r6 @@ -905,12 +879,6 @@ ret_from_irq: ret_from_exception: preempt_stop() -#ifdef CONFIG_POOR_MANS_STRACE - pta evt_debug_ret_from_exc, tr0 - ori SP, 0, r2 - blink tr0, LINK -#endif - ld.q SP, FRAME_S(FSSR), r6 shlri r6, 30, r6 andi r6, 1, r6 @@ -1236,18 +1204,6 @@ syscall_bad: .global syscall_ret syscall_ret: st.q SP, FRAME_R(9), r2 /* Expecting SP back to BASIC frame */ - -#ifdef CONFIG_POOR_MANS_STRACE - /* nothing useful in registers at this point */ - - movi evt_debug2, r5 - ori r5, 1, r5 - ptabs r5, tr0 - ld.q SP, FRAME_R(9), r2 - or SP, ZERO, r3 - blink tr0, LINK -#endif - ld.q SP, FRAME_S(FSPC), r2 addi r2, 4, r2 /* Move PC, being pre-execution event */ st.q SP, FRAME_S(FSPC), r2 @@ -1268,25 +1224,12 @@ ret_from_fork: ptabs r5, tr0 blink tr0, LINK -#ifdef CONFIG_POOR_MANS_STRACE - /* nothing useful in registers at this point */ - - movi evt_debug2, r5 - ori r5, 1, r5 - ptabs r5, tr0 - ld.q SP, FRAME_R(9), r2 - or SP, ZERO, r3 - blink tr0, LINK -#endif - ld.q SP, FRAME_S(FSPC), r2 addi r2, 4, r2 /* Move PC, being pre-execution event */ st.q SP, FRAME_S(FSPC), r2 pta ret_from_syscall, tr0 blink tr0, ZERO - - syscall_allowed: /* Use LINK to deflect the exit point, default is syscall_ret */ pta syscall_ret, tr0 diff --git a/arch/sh/lib64/.gitignore b/arch/sh/lib64/.gitignore deleted file mode 100644 index 3508c2c..0000000 --- a/arch/sh/lib64/.gitignore +++ /dev/null @@ -1 +0,0 @@ -syscalltab.h diff --git a/arch/sh/lib64/dbg.c b/arch/sh/lib64/dbg.c index 2fb8eaf..25f2481 100644 --- a/arch/sh/lib64/dbg.c +++ b/arch/sh/lib64/dbg.c @@ -135,140 +135,6 @@ void print_itlb(void) (" =============================================================\n"); } -/* ======================================================================= */ - -#ifdef CONFIG_POOR_MANS_STRACE - -#include "syscalltab.h" - -struct ring_node { - int evt; - int ret_addr; - int event; - int tra; - int pid; - unsigned long sp; - unsigned long pc; -}; - -static struct ring_node event_ring[16]; -static int event_ptr = 0; - -struct stored_syscall_data { - int pid; - int syscall_number; -}; - -#define N_STORED_SYSCALLS 16 - -static struct stored_syscall_data stored_syscalls[N_STORED_SYSCALLS]; -static int syscall_next=0; -static int syscall_next_print=0; - -void evt_debug(int evt, int ret_addr, int event, int tra, struct pt_regs *regs) -{ - int syscallno = tra & 0xff; - unsigned long sp; - unsigned long stack_bottom; - int pid; - struct ring_node *rr; - - pid = current->pid; - stack_bottom = (unsigned long) task_stack_page(current); - asm volatile("ori r15, 0, %0" : "=r" (sp)); - rr = event_ring + event_ptr; - rr->evt = evt; - rr->ret_addr = ret_addr; - rr->event = event; - rr->tra = tra; - rr->pid = pid; - rr->sp = sp; - rr->pc = regs->pc; - - if (sp < stack_bottom + 3092) { - int i, j; - printk("evt_debug : stack underflow report\n"); - for (j=0, i = event_ptr; j<16; j++) { - rr = event_ring + i; - printk("evt=%08x event=%08x tra=%08x pid=%5d sp=%08lx pc=%08lx\n", - rr->evt, rr->event, rr->tra, rr->pid, rr->sp, rr->pc); - i--; - i &= 15; - } - panic("STACK UNDERFLOW\n"); - } - - event_ptr = (event_ptr + 1) & 15; - - if ((event == 2) && (evt == 0x160)) { - if (syscallno < NUM_SYSCALL_INFO_ENTRIES) { - /* Store the syscall information to print later. We - * can't print this now - currently we're running with - * SR.BL=1, so we can't take a tlbmiss (which could occur - * in the console drivers under printk). - * - * Just overwrite old entries on ring overflow - this - * is only for last-hope debugging. */ - stored_syscalls[syscall_next].pid = current->pid; - stored_syscalls[syscall_next].syscall_number = syscallno; - syscall_next++; - syscall_next &= (N_STORED_SYSCALLS - 1); - } - } -} - -static void drain_syscalls(void) { - while (syscall_next_print != syscall_next) { - printk("Task %d: %s()\n", - stored_syscalls[syscall_next_print].pid, - syscall_info_table[stored_syscalls[syscall_next_print].syscall_number].name); - syscall_next_print++; - syscall_next_print &= (N_STORED_SYSCALLS - 1); - } -} - -void evt_debug2(unsigned int ret) -{ - drain_syscalls(); - printk("Task %d: syscall returns %08x\n", current->pid, ret); -} - -void evt_debug_ret_from_irq(struct pt_regs *regs) -{ - int pid; - struct ring_node *rr; - - pid = current->pid; - rr = event_ring + event_ptr; - rr->evt = 0xffff; - rr->ret_addr = 0; - rr->event = 0; - rr->tra = 0; - rr->pid = pid; - rr->pc = regs->pc; - event_ptr = (event_ptr + 1) & 15; -} - -void evt_debug_ret_from_exc(struct pt_regs *regs) -{ - int pid; - struct ring_node *rr; - - pid = current->pid; - rr = event_ring + event_ptr; - rr->evt = 0xfffe; - rr->ret_addr = 0; - rr->event = 0; - rr->tra = 0; - rr->pid = pid; - rr->pc = regs->pc; - event_ptr = (event_ptr + 1) & 15; -} - -#endif /* CONFIG_POOR_MANS_STRACE */ - -/* ======================================================================= */ - void show_excp_regs(char *from, int trapnr, int signr, struct pt_regs *regs) { -- cgit v0.10.2 From ef9f89996e450e9686816b6fc1e34d7b9a65766c Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Fri, 8 May 2009 17:36:57 +0900 Subject: sh: Kill off unused sh64 debug code. None of the print_page() code and associated helpers are presently used by anything in-tree, so just kill it off. Signed-off-by: Paul Mundt diff --git a/arch/sh/lib64/dbg.c b/arch/sh/lib64/dbg.c index 25f2481..6152a6a 100644 --- a/arch/sh/lib64/dbg.c +++ b/arch/sh/lib64/dbg.c @@ -246,51 +246,3 @@ void show_excp_regs(char *from, int trapnr, int signr, struct pt_regs *regs) print_dtlb(); print_itlb(); } - -/* ======================================================================= */ - -/* -** Depending on scan the MMU, Data or Instruction side -** looking for a valid mapping matching Eaddr & asid. -** Return -1 if not found or the TLB id entry otherwise. -** Note: it works only for 4k pages! -*/ -static unsigned long -lookup_mmu_side(unsigned long base, unsigned long Eaddr, unsigned long asid) -{ - regType_t pteH; - unsigned long epn; - int count; - - epn = Eaddr & 0xfffff000; - - for (count = 0; count < MAX_TLBs; count++, base += TLB_STEP) { - pteH = getConfigReg(base); - if (GET_VALID(pteH)) - if ((unsigned long) GET_EPN(pteH) == epn) - if ((unsigned long) GET_ASID(pteH) == asid) - break; - } - return ((unsigned long) ((count < MAX_TLBs) ? base : -1)); -} - -unsigned long lookup_dtlb(unsigned long Eaddr) -{ - unsigned long asid = get_asid(); - return (lookup_mmu_side((u64) DTLB_BASE, Eaddr, asid)); -} - -unsigned long lookup_itlb(unsigned long Eaddr) -{ - unsigned long asid = get_asid(); - return (lookup_mmu_side((u64) ITLB_BASE, Eaddr, asid)); -} - -void print_page(struct page *page) -{ - printk(" page[%p] -> index 0x%lx, count 0x%x, flags 0x%lx\n", - page, page->index, page_count(page), page->flags); - printk(" address_space = %p, pages =%ld\n", page->mapping, - page->mapping->nrpages); - -} diff --git a/arch/sh/lib64/udelay.c b/arch/sh/lib64/udelay.c index d76bd80..f215b06 100644 --- a/arch/sh/lib64/udelay.c +++ b/arch/sh/lib64/udelay.c @@ -33,7 +33,7 @@ void __delay(unsigned long loops) :"0"(loops)); } -inline void __const_udelay(unsigned long xloops) +void __const_udelay(unsigned long xloops) { __delay(xloops * (HZ * cpu_data[raw_smp_processor_id()].loops_per_jiffy)); } -- cgit v0.10.2 From 7d170b1bc540a1d83098a9f27cf4939e026fda81 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Fri, 8 May 2009 17:41:59 +0900 Subject: sh: Move out cayman-specific panic handler code to its own file. This moves out the cayman-specific panic handler code to a better location, and leaves the generic implementation a simple stub that is still used under emulation. Signed-off-by: Paul Mundt diff --git a/arch/sh/boards/mach-cayman/Makefile b/arch/sh/boards/mach-cayman/Makefile index cafe1ac3..00fa3ea 100644 --- a/arch/sh/boards/mach-cayman/Makefile +++ b/arch/sh/boards/mach-cayman/Makefile @@ -1,4 +1,4 @@ # # Makefile for the Hitachi Cayman specific parts of the kernel # -obj-y := setup.o irq.o +obj-y := setup.o irq.o panic.o diff --git a/arch/sh/boards/mach-cayman/panic.c b/arch/sh/boards/mach-cayman/panic.c new file mode 100644 index 0000000..d1e6730 --- /dev/null +++ b/arch/sh/boards/mach-cayman/panic.c @@ -0,0 +1,49 @@ +/* + * Copyright (C) 2003 Richard Curnow, SuperH UK Limited + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ + +#include +#include +#include + +/* THIS IS A PHYSICAL ADDRESS */ +#define HDSP2534_ADDR (0x04002100) + +static void poor_mans_delay(void) +{ + int i; + + for (i = 0; i < 2500000; i++) + cpu_relax(); +} + +static void show_value(unsigned long x) +{ + int i; + unsigned nibble; + for (i = 0; i < 8; i++) { + nibble = ((x >> (i * 4)) & 0xf); + + __raw_writeb(nibble + ((nibble > 9) ? 55 : 48), + HDSP2534_ADDR + 0xe0 + ((7 - i) << 2)); + } +} + +void +panic_handler(unsigned long panicPC, unsigned long panicSSR, + unsigned long panicEXPEVT) +{ + while (1) { + /* This piece of code displays the PC on the LED display */ + show_value(panicPC); + poor_mans_delay(); + show_value(panicSSR); + poor_mans_delay(); + show_value(panicEXPEVT); + poor_mans_delay(); + } +} diff --git a/arch/sh/lib64/panic.c b/arch/sh/lib64/panic.c index da32ba7..38c954e 100644 --- a/arch/sh/lib64/panic.c +++ b/arch/sh/lib64/panic.c @@ -6,53 +6,10 @@ * for more details. */ -#include -#include -#include - -/* THIS IS A PHYSICAL ADDRESS */ -#define HDSP2534_ADDR (0x04002100) - -#ifdef CONFIG_SH_CAYMAN - -static void poor_mans_delay(void) -{ - int i; - for (i = 0; i < 2500000; i++) { - } /* poor man's delay */ -} - -static void show_value(unsigned long x) -{ - int i; - unsigned nibble; - for (i = 0; i < 8; i++) { - nibble = ((x >> (i * 4)) & 0xf); - - ctrl_outb(nibble + ((nibble > 9) ? 55 : 48), - HDSP2534_ADDR + 0xe0 + ((7 - i) << 2)); - } -} - -#endif - void panic_handler(unsigned long panicPC, unsigned long panicSSR, unsigned long panicEXPEVT) { -#ifdef CONFIG_SH_CAYMAN - while (1) { - /* This piece of code displays the PC on the LED display */ - show_value(panicPC); - poor_mans_delay(); - show_value(panicSSR); - poor_mans_delay(); - show_value(panicEXPEVT); - poor_mans_delay(); - } -#endif - /* Never return from the panic handler */ for (;;) ; - } -- cgit v0.10.2 From 4f5ecaa05493dfddf155b40224b951592bfce325 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Fri, 8 May 2009 08:23:29 +0000 Subject: sh: clock framework update, fix count and kill off kref This patch updates the clock framework use count code. With this patch the enable() and disable() callbacks only get called when counting from and to zero. While at it the kref stuff gets replaced with an int. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt diff --git a/arch/sh/include/asm/clock.h b/arch/sh/include/asm/clock.h index 2f6c962..b1f2919 100644 --- a/arch/sh/include/asm/clock.h +++ b/arch/sh/include/asm/clock.h @@ -1,7 +1,6 @@ #ifndef __ASM_SH_CLOCK_H #define __ASM_SH_CLOCK_H -#include #include #include #include @@ -28,7 +27,7 @@ struct clk { struct clk *parent; struct clk_ops *ops; - struct kref kref; + int usecount; unsigned long rate; unsigned long flags; @@ -37,6 +36,7 @@ struct clk { #define CLK_ALWAYS_ENABLED (1 << 0) #define CLK_RATE_PROPAGATES (1 << 1) +#define CLK_NEEDS_INIT (1 << 2) /* Should be defined by processor-specific code */ void arch_init_clk_ops(struct clk_ops **, int type); diff --git a/arch/sh/kernel/cpu/clock.c b/arch/sh/kernel/cpu/clock.c index 099373a..133dbe4 100644 --- a/arch/sh/kernel/cpu/clock.c +++ b/arch/sh/kernel/cpu/clock.c @@ -19,7 +19,6 @@ #include #include #include -#include #include #include #include @@ -90,7 +89,7 @@ static void propagate_rate(struct clk *clk) } } -static int __clk_enable(struct clk *clk) +static void __clk_init(struct clk *clk) { /* * See if this is the first time we're enabling the clock, some @@ -100,19 +99,33 @@ static int __clk_enable(struct clk *clk) * divisors to use before it can effectively recalc. */ - if (clk->flags & CLK_ALWAYS_ENABLED) { - kref_get(&clk->kref); - return 0; - } - - if (unlikely(atomic_read(&clk->kref.refcount) == 1)) + if (clk->flags & CLK_NEEDS_INIT) { if (clk->ops && clk->ops->init) clk->ops->init(clk); - kref_get(&clk->kref); + clk->flags &= ~CLK_NEEDS_INIT; + } +} + +static int __clk_enable(struct clk *clk) +{ + if (!clk) + return -EINVAL; + + clk->usecount++; + + /* nothing to do if always enabled */ + if (clk->flags & CLK_ALWAYS_ENABLED) + return 0; + + if (clk->usecount == 1) { + __clk_init(clk); - if (likely(clk->ops && clk->ops->enable)) - clk->ops->enable(clk); + __clk_enable(clk->parent); + + if (clk->ops && clk->ops->enable) + clk->ops->enable(clk); + } return 0; } @@ -122,11 +135,6 @@ int clk_enable(struct clk *clk) unsigned long flags; int ret; - if (!clk) - return -EINVAL; - - clk_enable(clk->parent); - spin_lock_irqsave(&clock_lock, flags); ret = __clk_enable(clk); spin_unlock_irqrestore(&clock_lock, flags); @@ -135,21 +143,23 @@ int clk_enable(struct clk *clk) } EXPORT_SYMBOL_GPL(clk_enable); -static void clk_kref_release(struct kref *kref) -{ - /* Nothing to do */ -} - static void __clk_disable(struct clk *clk) { - int count = kref_put(&clk->kref, clk_kref_release); + if (!clk) + return; + + clk->usecount--; + + WARN_ON(clk->usecount < 0); if (clk->flags & CLK_ALWAYS_ENABLED) return; - if (!count) { /* count reaches zero, disable the clock */ + if (clk->usecount == 0) { if (likely(clk->ops && clk->ops->disable)) clk->ops->disable(clk); + + __clk_disable(clk->parent); } } @@ -157,14 +167,9 @@ void clk_disable(struct clk *clk) { unsigned long flags; - if (!clk) - return; - spin_lock_irqsave(&clock_lock, flags); __clk_disable(clk); spin_unlock_irqrestore(&clock_lock, flags); - - clk_disable(clk->parent); } EXPORT_SYMBOL_GPL(clk_disable); @@ -173,14 +178,14 @@ int clk_register(struct clk *clk) mutex_lock(&clock_list_sem); list_add(&clk->node, &clock_list); - kref_init(&clk->kref); + clk->usecount = 0; + clk->flags |= CLK_NEEDS_INIT; mutex_unlock(&clock_list_sem); if (clk->flags & CLK_ALWAYS_ENABLED) { + __clk_init(clk); pr_debug( "Clock '%s' is ALWAYS_ENABLED\n", clk->name); - if (clk->ops && clk->ops->init) - clk->ops->init(clk); if (clk->ops && clk->ops->enable) clk->ops->enable(clk); pr_debug( "Enabled."); @@ -356,7 +361,7 @@ static int show_clocks(char *buf, char **start, off_t off, p += sprintf(p, "%-12s\t: %ld.%02ldMHz\t%s\n", clk->name, rate / 1000000, (rate % 1000000) / 10000, ((clk->flags & CLK_ALWAYS_ENABLED) || - (atomic_read(&clk->kref.refcount) != 1)) ? + clk->usecount > 0) ? "enabled" : "disabled"); } -- cgit v0.10.2 From 583d1d549ff107500481461cec0325189c5349ec Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Fri, 8 May 2009 08:27:19 +0000 Subject: sh: enable TMU clocksource on sh7722 This patch enables the TMU clocksource on sh7722. To prioritize TMU over CMT we also adjust the CMT clock source rating. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7722.c b/arch/sh/kernel/cpu/sh4a/setup-sh7722.c index 624e8e5..b1c3e7f 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7722.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7722.c @@ -183,7 +183,7 @@ static struct sh_timer_config cmt_platform_data = { .timer_bit = 5, .clk = "cmt0", .clockevent_rating = 125, - .clocksource_rating = 200, + .clocksource_rating = 125, }; static struct resource cmt_resources[] = { @@ -245,7 +245,7 @@ static struct sh_timer_config tmu1_platform_data = { .channel_offset = 0x10, .timer_bit = 1, .clk = "tmu0", - .clocksource_rating = 0, /* disabled for now */ + .clocksource_rating = 200, }; static struct resource tmu1_resources[] = { -- cgit v0.10.2 From 47dd6f4439811c6c83d9abf2f364bcb6d2684640 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Fri, 8 May 2009 08:32:18 +0000 Subject: sh: TMU platform data for sh7723 This patch adds TMU platform data for sh7723. Both clockevent and clocksource support is enabled. While at it, adjust the CMT clocksource rating to prioritize the TMU. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7723.c b/arch/sh/kernel/cpu/sh4a/setup-sh7723.c index fb9b542..484ca2d 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7723.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7723.c @@ -107,7 +107,7 @@ static struct sh_timer_config cmt_platform_data = { .timer_bit = 5, .clk = "cmt0", .clockevent_rating = 125, - .clocksource_rating = 200, + .clocksource_rating = 125, }; static struct resource cmt_resources[] = { @@ -133,6 +133,188 @@ static struct platform_device cmt_device = { .num_resources = ARRAY_SIZE(cmt_resources), }; +static struct sh_timer_config tmu0_platform_data = { + .name = "TMU0", + .channel_offset = 0x04, + .timer_bit = 0, + .clk = "tmu0", + .clockevent_rating = 200, +}; + +static struct resource tmu0_resources[] = { + [0] = { + .name = "TMU0", + .start = 0xffd80008, + .end = 0xffd80013, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 16, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device tmu0_device = { + .name = "sh_tmu", + .id = 0, + .dev = { + .platform_data = &tmu0_platform_data, + }, + .resource = tmu0_resources, + .num_resources = ARRAY_SIZE(tmu0_resources), +}; + +static struct sh_timer_config tmu1_platform_data = { + .name = "TMU1", + .channel_offset = 0x10, + .timer_bit = 1, + .clk = "tmu0", + .clocksource_rating = 200, +}; + +static struct resource tmu1_resources[] = { + [0] = { + .name = "TMU1", + .start = 0xffd80014, + .end = 0xffd8001f, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 17, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device tmu1_device = { + .name = "sh_tmu", + .id = 1, + .dev = { + .platform_data = &tmu1_platform_data, + }, + .resource = tmu1_resources, + .num_resources = ARRAY_SIZE(tmu1_resources), +}; + +static struct sh_timer_config tmu2_platform_data = { + .name = "TMU2", + .channel_offset = 0x1c, + .timer_bit = 2, + .clk = "tmu0", +}; + +static struct resource tmu2_resources[] = { + [0] = { + .name = "TMU2", + .start = 0xffd80020, + .end = 0xffd8002b, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 18, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device tmu2_device = { + .name = "sh_tmu", + .id = 2, + .dev = { + .platform_data = &tmu2_platform_data, + }, + .resource = tmu2_resources, + .num_resources = ARRAY_SIZE(tmu2_resources), +}; + +static struct sh_timer_config tmu3_platform_data = { + .name = "TMU3", + .channel_offset = 0x04, + .timer_bit = 0, + .clk = "tmu1", +}; + +static struct resource tmu3_resources[] = { + [0] = { + .name = "TMU3", + .start = 0xffd90008, + .end = 0xffd90013, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 57, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device tmu3_device = { + .name = "sh_tmu", + .id = 3, + .dev = { + .platform_data = &tmu3_platform_data, + }, + .resource = tmu3_resources, + .num_resources = ARRAY_SIZE(tmu3_resources), +}; + +static struct sh_timer_config tmu4_platform_data = { + .name = "TMU4", + .channel_offset = 0x10, + .timer_bit = 1, + .clk = "tmu1", +}; + +static struct resource tmu4_resources[] = { + [0] = { + .name = "TMU4", + .start = 0xffd90014, + .end = 0xffd9001f, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 58, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device tmu4_device = { + .name = "sh_tmu", + .id = 4, + .dev = { + .platform_data = &tmu4_platform_data, + }, + .resource = tmu4_resources, + .num_resources = ARRAY_SIZE(tmu4_resources), +}; + +static struct sh_timer_config tmu5_platform_data = { + .name = "TMU5", + .channel_offset = 0x1c, + .timer_bit = 2, + .clk = "tmu1", +}; + +static struct resource tmu5_resources[] = { + [0] = { + .name = "TMU5", + .start = 0xffd90020, + .end = 0xffd9002b, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 57, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device tmu5_device = { + .name = "sh_tmu", + .id = 5, + .dev = { + .platform_data = &tmu5_platform_data, + }, + .resource = tmu5_resources, + .num_resources = ARRAY_SIZE(tmu5_resources), +}; + static struct plat_sci_port sci_platform_data[] = { { .mapbase = 0xffe00000, @@ -255,6 +437,12 @@ static struct platform_device iic_device = { static struct platform_device *sh7723_devices[] __initdata = { &cmt_device, + &tmu0_device, + &tmu1_device, + &tmu2_device, + &tmu3_device, + &tmu4_device, + &tmu5_device, &sci_device, &rtc_device, &iic_device, @@ -282,6 +470,12 @@ __initcall(sh7723_devices_setup); static struct platform_device *sh7723_early_devices[] __initdata = { &cmt_device, + &tmu0_device, + &tmu1_device, + &tmu2_device, + &tmu3_device, + &tmu4_device, + &tmu5_device, }; void __init plat_early_device_setup(void) -- cgit v0.10.2 From b366328335b98373325977e116d2423f500708ac Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Fri, 8 May 2009 18:01:03 +0900 Subject: sh: Drop dead rules from arch/sh/kernel/Makefile_64. Several of these options are specific to the SHcompact ISA and will need to be rewritten for SHmedia if they are to be supported at all. Drop the impossible rules for now. Signed-off-by: Paul Mundt diff --git a/arch/sh/kernel/Makefile_64 b/arch/sh/kernel/Makefile_64 index 31f6ebf..c845a0d 100644 --- a/arch/sh/kernel/Makefile_64 +++ b/arch/sh/kernel/Makefile_64 @@ -5,13 +5,10 @@ obj-y := debugtraps.o idle.o io.o io_generic.o irq.o machvec.o process_64.o \ syscalls_64.o time.o topology.o traps.o traps_64.o obj-y += cpu/ timers/ -obj-$(CONFIG_VSYSCALL) += vsyscall/ obj-$(CONFIG_SMP) += smp.o -obj-$(CONFIG_SH_STANDARD_BIOS) += sh_bios.o obj-$(CONFIG_SH_CPU_FREQ) += cpufreq.o obj-$(CONFIG_MODULES) += sh_ksyms_64.o module.o obj-$(CONFIG_EARLY_PRINTK) += early_printk.o -obj-$(CONFIG_KEXEC) += machine_kexec.o relocate_kernel.o obj-$(CONFIG_CRASH_DUMP) += crash_dump.o obj-$(CONFIG_STACKTRACE) += stacktrace.o obj-$(CONFIG_IO_TRAPPED) += io_trapped.o -- cgit v0.10.2 From 6eac1af01112d1919b1c432f6591e6368e8d538f Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Fri, 8 May 2009 19:48:47 +0900 Subject: sh: Always select RTC_LIB, not just for SUPERH32. The RTC_LIB helpers are used in arch/sh/kernel/time.c, which was previously only the case for the 32-bit variant. Now that this has become the common implementation, move the RTC_LIB select to reflect that. Fixes up the sh64 build. Signed-off-by: Paul Mundt diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig index d88a61b..6ed16c4 100644 --- a/arch/sh/Kconfig +++ b/arch/sh/Kconfig @@ -15,6 +15,7 @@ config SUPERH select HAVE_IOREMAP_PROT if MMU select HAVE_ARCH_TRACEHOOK select HAVE_DMA_API_DEBUG + select RTC_LIB help The SuperH is a RISC processor targeted for use in embedded systems and consumer electronics; it was also used in the Sega Dreamcast @@ -30,7 +31,6 @@ config SUPERH32 select HAVE_DYNAMIC_FTRACE select HAVE_ARCH_KGDB select ARCH_HIBERNATION_POSSIBLE if MMU - select RTC_LIB config SUPERH64 def_bool ARCH = "sh64" -- cgit v0.10.2 From 30d88cf52f229c3e0c90b8d71036960ccc2db4e2 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Fri, 8 May 2009 20:20:56 +0900 Subject: sh: Kill off extra cflags Kconfig entry. There is no real reason to use this anymore, as the build system generally knows what it is doing with regards to cflags mangling. Signed-off-by: Paul Mundt diff --git a/arch/sh/Kconfig.debug b/arch/sh/Kconfig.debug index 44627ef..8179cc9 100644 --- a/arch/sh/Kconfig.debug +++ b/arch/sh/Kconfig.debug @@ -122,17 +122,6 @@ config SH_NO_BSS_INIT For all other cases, say N. If this option seems perplexing, or you aren't sure, say N. -config MORE_COMPILE_OPTIONS - bool "Add any additional compile options" - help - If you want to add additional CFLAGS to the kernel build, enable this - option and then enter what you would like to add in the next question. - Note however that -g is already appended with the selection of KGDB. - -config COMPILE_OPTIONS - string "Additional compile arguments" - depends on MORE_COMPILE_OPTIONS - config SH64_SR_WATCH bool "Debug: set SR.WATCH to enable hardware watchpoints and trace" depends on SUPERH64 diff --git a/arch/sh/Makefile b/arch/sh/Makefile index 493da97..68348e7 100644 --- a/arch/sh/Makefile +++ b/arch/sh/Makefile @@ -70,9 +70,6 @@ cflags-$(CONFIG_CPU_LITTLE_ENDIAN) += -ml cflags-y += $(call cc-option,-mno-fdpic) cflags-y += $(isaflags-y) -ffreestanding -cflags-$(CONFIG_MORE_COMPILE_OPTIONS) += \ - $(shell echo $(CONFIG_COMPILE_OPTIONS) | sed -e 's/"//g') - OBJCOPYFLAGS := -O binary -R .note -R .note.gnu.build-id -R .comment \ -R .stab -R .stabstr -S -- cgit v0.10.2 From c29418c2ae15ee9171bc136ad261c497b95a46fc Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Fri, 8 May 2009 20:32:56 +0900 Subject: sh: Always fixup unaligned userspace accesses on sh64. sh64 has traditionally had this configurable via a Kconfig option (CONFIG_SH64_USER_MISALIGNED_FIXUP). In practice it has never really been terribly useful to turn this off, so just get rid of the option entirely. We leave the sysctl around so we don't end up breaking existing root file systems, and to allow folks that really want this off to do so at their own risk. Signed-off-by: Paul Mundt diff --git a/arch/sh/Kconfig.cpu b/arch/sh/Kconfig.cpu index c7d7043..9eb1712 100644 --- a/arch/sh/Kconfig.cpu +++ b/arch/sh/Kconfig.cpu @@ -76,11 +76,6 @@ config SPECULATIVE_EXECUTION If unsure, say N. -config SH64_USER_MISALIGNED_FIXUP - def_bool y - prompt "Fixup misaligned loads/stores occurring in user mode" - depends on SUPERH64 - config SH64_ID2815_WORKAROUND bool "Include workaround for SH5-101 cut2 silicon defect ID2815" depends on CPU_SUBTYPE_SH5_101 diff --git a/arch/sh/kernel/traps_64.c b/arch/sh/kernel/traps_64.c index a85831c..267e5eb 100644 --- a/arch/sh/kernel/traps_64.c +++ b/arch/sh/kernel/traps_64.c @@ -370,7 +370,6 @@ static int generate_and_check_address(struct pt_regs *regs, return -1; } -#if defined(CONFIG_SH64_USER_MISALIGNED_FIXUP) /* Check accessible. For misaligned access in the kernel, assume the address is always accessible (and if not, just fault when the load/store gets done.) */ @@ -380,18 +379,13 @@ static int generate_and_check_address(struct pt_regs *regs, } /* Do access_ok check later - it depends on whether it's a load or a store. */ } -#endif *address = addr; return 0; } -/* Default value as for sh */ -#if defined(CONFIG_SH64_USER_MISALIGNED_FIXUP) static int user_mode_unaligned_fixup_count = 10; static int user_mode_unaligned_fixup_enable = 1; -#endif - static int kernel_mode_unaligned_fixup_count = 32; static void misaligned_kernel_word_load(__u64 address, int do_sign_extend, __u64 *result) @@ -440,7 +434,6 @@ static int misaligned_load(struct pt_regs *regs, } destreg = (opcode >> 4) & 0x3f; -#if defined(CONFIG_SH64_USER_MISALIGNED_FIXUP) if (user_mode(regs)) { __u64 buffer; @@ -470,9 +463,7 @@ static int misaligned_load(struct pt_regs *regs, width_shift, (unsigned long) regs->pc); break; } - } else -#endif - { + } else { /* kernel mode - we can take short cuts since if we fault, it's a genuine bug */ __u64 lo, hi; @@ -519,7 +510,6 @@ static int misaligned_store(struct pt_regs *regs, } srcreg = (opcode >> 4) & 0x3f; -#if defined(CONFIG_SH64_USER_MISALIGNED_FIXUP) if (user_mode(regs)) { __u64 buffer; @@ -546,9 +536,7 @@ static int misaligned_store(struct pt_regs *regs, if (__copy_user((void *)(int)address, &buffer, (1 << width_shift)) > 0) { return -1; /* fault */ } - } else -#endif - { + } else { /* kernel mode - we can take short cuts since if we fault, it's a genuine bug */ __u64 val = regs->regs[srcreg]; @@ -576,7 +564,6 @@ static int misaligned_store(struct pt_regs *regs, } -#if defined(CONFIG_SH64_USER_MISALIGNED_FIXUP) /* Never need to fix up misaligned FPU accesses within the kernel since that's a real error. */ static int misaligned_fpu_load(struct pt_regs *regs, @@ -727,7 +714,6 @@ static int misaligned_fpu_store(struct pt_regs *regs, return -1; } } -#endif static int misaligned_fixup(struct pt_regs *regs) { @@ -735,12 +721,8 @@ static int misaligned_fixup(struct pt_regs *regs) int error; int major, minor; -#if !defined(CONFIG_SH64_USER_MISALIGNED_FIXUP) - /* Never fixup user mode misaligned accesses without this option enabled. */ - return -1; -#else - if (!user_mode_unaligned_fixup_enable) return -1; -#endif + if (!user_mode_unaligned_fixup_enable) + return -1; error = read_opcode(regs->pc, &opcode, user_mode(regs)); if (error < 0) { @@ -749,15 +731,12 @@ static int misaligned_fixup(struct pt_regs *regs) major = (opcode >> 26) & 0x3f; minor = (opcode >> 16) & 0xf; -#if defined(CONFIG_SH64_USER_MISALIGNED_FIXUP) if (user_mode(regs) && (user_mode_unaligned_fixup_count > 0)) { --user_mode_unaligned_fixup_count; /* Only do 'count' worth of these reports, to remove a potential DoS against syslog */ printk("Fixing up unaligned userspace access in \"%s\" pid=%d pc=0x%08x ins=0x%08lx\n", current->comm, task_pid_nr(current), (__u32)regs->pc, opcode); - } else -#endif - if (!user_mode(regs) && (kernel_mode_unaligned_fixup_count > 0)) { + } else if (!user_mode(regs) && (kernel_mode_unaligned_fixup_count > 0)) { --kernel_mode_unaligned_fixup_count; if (in_interrupt()) { printk("Fixing up unaligned kernelspace access in interrupt pc=0x%08x ins=0x%08lx\n", @@ -830,7 +809,6 @@ static int misaligned_fixup(struct pt_regs *regs) } break; -#if defined(CONFIG_SH64_USER_MISALIGNED_FIXUP) case (0x94>>2): /* FLD.S */ error = misaligned_fpu_load(regs, opcode, 1, 2, 0); break; @@ -881,7 +859,6 @@ static int misaligned_fixup(struct pt_regs *regs) break; } break; -#endif default: /* Fault */ @@ -907,7 +884,6 @@ static ctl_table unaligned_table[] = { .mode = 0644, .proc_handler = &proc_dointvec }, -#if defined(CONFIG_SH64_USER_MISALIGNED_FIXUP) { .ctl_name = CTL_UNNUMBERED, .procname = "user_reports", @@ -923,7 +899,6 @@ static ctl_table unaligned_table[] = { .maxlen = sizeof(int), .mode = 0644, .proc_handler = &proc_dointvec}, -#endif {} }; -- cgit v0.10.2 From c3d480ded1584dc17f6e82f49af4155380a51dda Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Fri, 8 May 2009 21:57:04 +0900 Subject: sh: TMU platform data for SH7786. Wires up all 12 TMU channels, with TMU0 and 1 used as clockevent and clocksource respectively. Signed-off-by: Paul Mundt diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7786.c b/arch/sh/kernel/cpu/sh4a/setup-sh7786.c index 90e8cff..2c464bf 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7786.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7786.c @@ -3,6 +3,7 @@ * * Copyright (C) 2009 Renesas Solutions Corp. * Kuninori Morimoto + * Paul Mundt * * Based on SH7785 Setup * @@ -19,6 +20,7 @@ #include #include #include +#include #include static struct plat_sci_port sci_platform_data[] = { @@ -69,6 +71,368 @@ static struct platform_device sci_device = { }, }; +static struct sh_timer_config tmu0_platform_data = { + .name = "TMU0", + .channel_offset = 0x04, + .timer_bit = 0, + .clk = "module_clk", + .clockevent_rating = 200, +}; + +static struct resource tmu0_resources[] = { + [0] = { + .name = "TMU0", + .start = 0xffd80008, + .end = 0xffd80013, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 16, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device tmu0_device = { + .name = "sh_tmu", + .id = 0, + .dev = { + .platform_data = &tmu0_platform_data, + }, + .resource = tmu0_resources, + .num_resources = ARRAY_SIZE(tmu0_resources), +}; + +static struct sh_timer_config tmu1_platform_data = { + .name = "TMU1", + .channel_offset = 0x10, + .timer_bit = 1, + .clk = "module_clk", + .clocksource_rating = 200, +}; + +static struct resource tmu1_resources[] = { + [0] = { + .name = "TMU1", + .start = 0xffd80014, + .end = 0xffd8001f, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 17, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device tmu1_device = { + .name = "sh_tmu", + .id = 1, + .dev = { + .platform_data = &tmu1_platform_data, + }, + .resource = tmu1_resources, + .num_resources = ARRAY_SIZE(tmu1_resources), +}; + +static struct sh_timer_config tmu2_platform_data = { + .name = "TMU2", + .channel_offset = 0x1c, + .timer_bit = 2, + .clk = "module_clk", +}; + +static struct resource tmu2_resources[] = { + [0] = { + .name = "TMU2", + .start = 0xffd80020, + .end = 0xffd8002f, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 18, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device tmu2_device = { + .name = "sh_tmu", + .id = 2, + .dev = { + .platform_data = &tmu2_platform_data, + }, + .resource = tmu2_resources, + .num_resources = ARRAY_SIZE(tmu2_resources), +}; + +static struct sh_timer_config tmu3_platform_data = { + .name = "TMU3", + .channel_offset = 0x04, + .timer_bit = 0, + .clk = "module_clk", +}; + +static struct resource tmu3_resources[] = { + [0] = { + .name = "TMU3", + .start = 0xffda0008, + .end = 0xffda0013, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 20, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device tmu3_device = { + .name = "sh_tmu", + .id = 3, + .dev = { + .platform_data = &tmu3_platform_data, + }, + .resource = tmu3_resources, + .num_resources = ARRAY_SIZE(tmu3_resources), +}; + +static struct sh_timer_config tmu4_platform_data = { + .name = "TMU4", + .channel_offset = 0x10, + .timer_bit = 1, + .clk = "module_clk", +}; + +static struct resource tmu4_resources[] = { + [0] = { + .name = "TMU4", + .start = 0xffda0014, + .end = 0xffda001f, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 21, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device tmu4_device = { + .name = "sh_tmu", + .id = 4, + .dev = { + .platform_data = &tmu4_platform_data, + }, + .resource = tmu4_resources, + .num_resources = ARRAY_SIZE(tmu4_resources), +}; + +static struct sh_timer_config tmu5_platform_data = { + .name = "TMU5", + .channel_offset = 0x1c, + .timer_bit = 2, + .clk = "module_clk", +}; + +static struct resource tmu5_resources[] = { + [0] = { + .name = "TMU5", + .start = 0xffda0020, + .end = 0xffda002b, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 22, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device tmu5_device = { + .name = "sh_tmu", + .id = 5, + .dev = { + .platform_data = &tmu5_platform_data, + }, + .resource = tmu5_resources, + .num_resources = ARRAY_SIZE(tmu5_resources), +}; + +static struct sh_timer_config tmu6_platform_data = { + .name = "TMU6", + .channel_offset = 0x04, + .timer_bit = 0, + .clk = "module_clk", +}; + +static struct resource tmu6_resources[] = { + [0] = { + .name = "TMU6", + .start = 0xffdc0008, + .end = 0xffdc0013, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 45, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device tmu6_device = { + .name = "sh_tmu", + .id = 6, + .dev = { + .platform_data = &tmu6_platform_data, + }, + .resource = tmu6_resources, + .num_resources = ARRAY_SIZE(tmu6_resources), +}; + +static struct sh_timer_config tmu7_platform_data = { + .name = "TMU7", + .channel_offset = 0x10, + .timer_bit = 1, + .clk = "module_clk", +}; + +static struct resource tmu7_resources[] = { + [0] = { + .name = "TMU7", + .start = 0xffdc0014, + .end = 0xffdc001f, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 45, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device tmu7_device = { + .name = "sh_tmu", + .id = 7, + .dev = { + .platform_data = &tmu7_platform_data, + }, + .resource = tmu7_resources, + .num_resources = ARRAY_SIZE(tmu7_resources), +}; + +static struct sh_timer_config tmu8_platform_data = { + .name = "TMU8", + .channel_offset = 0x1c, + .timer_bit = 2, + .clk = "module_clk", +}; + +static struct resource tmu8_resources[] = { + [0] = { + .name = "TMU8", + .start = 0xffdc0020, + .end = 0xffdc002b, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 45, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device tmu8_device = { + .name = "sh_tmu", + .id = 8, + .dev = { + .platform_data = &tmu8_platform_data, + }, + .resource = tmu8_resources, + .num_resources = ARRAY_SIZE(tmu8_resources), +}; + +static struct sh_timer_config tmu9_platform_data = { + .name = "TMU9", + .channel_offset = 0x04, + .timer_bit = 0, + .clk = "module_clk", +}; + +static struct resource tmu9_resources[] = { + [0] = { + .name = "TMU9", + .start = 0xffde0008, + .end = 0xffde0013, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 46, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device tmu9_device = { + .name = "sh_tmu", + .id = 9, + .dev = { + .platform_data = &tmu9_platform_data, + }, + .resource = tmu9_resources, + .num_resources = ARRAY_SIZE(tmu9_resources), +}; + +static struct sh_timer_config tmu10_platform_data = { + .name = "TMU10", + .channel_offset = 0x10, + .timer_bit = 1, + .clk = "module_clk", +}; + +static struct resource tmu10_resources[] = { + [0] = { + .name = "TMU10", + .start = 0xffde0014, + .end = 0xffde001f, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 46, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device tmu10_device = { + .name = "sh_tmu", + .id = 10, + .dev = { + .platform_data = &tmu10_platform_data, + }, + .resource = tmu10_resources, + .num_resources = ARRAY_SIZE(tmu10_resources), +}; + +static struct sh_timer_config tmu11_platform_data = { + .name = "TMU11", + .channel_offset = 0x1c, + .timer_bit = 2, + .clk = "module_clk", +}; + +static struct resource tmu11_resources[] = { + [0] = { + .name = "TMU11", + .start = 0xffde0020, + .end = 0xffde002b, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 46, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device tmu11_device = { + .name = "sh_tmu", + .id = 11, + .dev = { + .platform_data = &tmu11_platform_data, + }, + .resource = tmu11_resources, + .num_resources = ARRAY_SIZE(tmu11_resources), +}; + static struct resource usb_ohci_resources[] = { [0] = { .start = 0xffe70400, @@ -94,6 +458,21 @@ static struct platform_device usb_ohci_device = { .resource = usb_ohci_resources, }; +static struct platform_device *sh7786_early_devices[] __initdata = { + &tmu0_device, + &tmu1_device, + &tmu2_device, + &tmu3_device, + &tmu4_device, + &tmu5_device, + &tmu6_device, + &tmu7_device, + &tmu8_device, + &tmu9_device, + &tmu10_device, + &tmu11_device, +}; + static struct platform_device *sh7786_devices[] __initdata = { &sci_device, &usb_ohci_device, @@ -156,12 +535,26 @@ static void __init sh7786_usb_setup(void) static int __init sh7786_devices_setup(void) { + int ret; + sh7786_usb_setup(); + + ret = platform_add_devices(sh7786_early_devices, + ARRAY_SIZE(sh7786_early_devices)); + if (unlikely(ret != 0)) + return ret; + return platform_add_devices(sh7786_devices, ARRAY_SIZE(sh7786_devices)); } device_initcall(sh7786_devices_setup); +void __init plat_early_device_setup(void) +{ + early_platform_add_devices(sh7786_early_devices, + ARRAY_SIZE(sh7786_early_devices)); +} + enum { UNUSED = 0, -- cgit v0.10.2 From ccdaeb4c8f982900a2abf722e34b60131394d8eb Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Fri, 8 May 2009 22:09:30 +0900 Subject: sh: TMU platform data for SH-X3 proto CPU. Signed-off-by: Paul Mundt diff --git a/arch/sh/kernel/cpu/sh4a/setup-shx3.c b/arch/sh/kernel/cpu/sh4a/setup-shx3.c index bd35f3253..9d5185b 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-shx3.c +++ b/arch/sh/kernel/cpu/sh4a/setup-shx3.c @@ -1,7 +1,7 @@ /* - * SH-X3 Setup + * SH-X3 Prototype Setup * - * Copyright (C) 2007 Paul Mundt + * Copyright (C) 2007 - 2009 Paul Mundt * * This file is subject to the terms and conditions of the GNU General Public * License. See the file "COPYING" in the main directory of this archive @@ -12,6 +12,7 @@ #include #include #include +#include #include static struct plat_sci_port sci_platform_data[] = { @@ -48,17 +49,221 @@ static struct platform_device sci_device = { }, }; +static struct sh_timer_config tmu0_platform_data = { + .name = "TMU0", + .channel_offset = 0x04, + .timer_bit = 0, + .clk = "module_clk", + .clockevent_rating = 200, +}; + +static struct resource tmu0_resources[] = { + [0] = { + .name = "TMU0", + .start = 0xffc10008, + .end = 0xffc10013, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 16, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device tmu0_device = { + .name = "sh_tmu", + .id = 0, + .dev = { + .platform_data = &tmu0_platform_data, + }, + .resource = tmu0_resources, + .num_resources = ARRAY_SIZE(tmu0_resources), +}; + +static struct sh_timer_config tmu1_platform_data = { + .name = "TMU1", + .channel_offset = 0x10, + .timer_bit = 1, + .clk = "module_clk", + .clocksource_rating = 200, +}; + +static struct resource tmu1_resources[] = { + [0] = { + .name = "TMU1", + .start = 0xffc10014, + .end = 0xffc1001f, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 17, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device tmu1_device = { + .name = "sh_tmu", + .id = 1, + .dev = { + .platform_data = &tmu1_platform_data, + }, + .resource = tmu1_resources, + .num_resources = ARRAY_SIZE(tmu1_resources), +}; + +static struct sh_timer_config tmu2_platform_data = { + .name = "TMU2", + .channel_offset = 0x1c, + .timer_bit = 2, + .clk = "module_clk", +}; + +static struct resource tmu2_resources[] = { + [0] = { + .name = "TMU2", + .start = 0xffc10020, + .end = 0xffc1002f, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 18, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device tmu2_device = { + .name = "sh_tmu", + .id = 2, + .dev = { + .platform_data = &tmu2_platform_data, + }, + .resource = tmu2_resources, + .num_resources = ARRAY_SIZE(tmu2_resources), +}; + +static struct sh_timer_config tmu3_platform_data = { + .name = "TMU3", + .channel_offset = 0x04, + .timer_bit = 0, + .clk = "module_clk", +}; + +static struct resource tmu3_resources[] = { + [0] = { + .name = "TMU3", + .start = 0xffc20008, + .end = 0xffc20013, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 19, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device tmu3_device = { + .name = "sh_tmu", + .id = 3, + .dev = { + .platform_data = &tmu3_platform_data, + }, + .resource = tmu3_resources, + .num_resources = ARRAY_SIZE(tmu3_resources), +}; + +static struct sh_timer_config tmu4_platform_data = { + .name = "TMU4", + .channel_offset = 0x10, + .timer_bit = 1, + .clk = "module_clk", +}; + +static struct resource tmu4_resources[] = { + [0] = { + .name = "TMU4", + .start = 0xffc20014, + .end = 0xffc2001f, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 20, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device tmu4_device = { + .name = "sh_tmu", + .id = 4, + .dev = { + .platform_data = &tmu4_platform_data, + }, + .resource = tmu4_resources, + .num_resources = ARRAY_SIZE(tmu4_resources), +}; + +static struct sh_timer_config tmu5_platform_data = { + .name = "TMU5", + .channel_offset = 0x1c, + .timer_bit = 2, + .clk = "module_clk", +}; + +static struct resource tmu5_resources[] = { + [0] = { + .name = "TMU5", + .start = 0xffc20020, + .end = 0xffc2002b, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 21, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device tmu5_device = { + .name = "sh_tmu", + .id = 5, + .dev = { + .platform_data = &tmu5_platform_data, + }, + .resource = tmu5_resources, + .num_resources = ARRAY_SIZE(tmu5_resources), +}; + +static struct platform_device *shx3_early_devices[] __initdata = { + &tmu0_device, + &tmu1_device, + &tmu2_device, + &tmu3_device, + &tmu4_device, + &tmu5_device, +}; + static struct platform_device *shx3_devices[] __initdata = { &sci_device, }; static int __init shx3_devices_setup(void) { + int ret; + + ret = platform_add_devices(shx3_early_devices, + ARRAY_SIZE(shx3_early_devices)); + if (unlikely(ret != 0)) + return ret; + return platform_add_devices(shx3_devices, ARRAY_SIZE(shx3_devices)); } __initcall(shx3_devices_setup); +void __init plat_early_device_setup(void) +{ + early_platform_add_devices(shx3_early_devices, + ARRAY_SIZE(shx3_early_devices)); +} + enum { UNUSED = 0, -- cgit v0.10.2 From 7b551f9daa9bd9533ba4ce31622ed4be1dd97d3e Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Fri, 8 May 2009 22:14:01 +0900 Subject: sh: Kill off the GENERIC_CALIBRATE_DELAY ifndef. Now that everyone is using the clock framework directly and we unconditionally provide our own calibrate_delay() function, having it wrapped in an ifndef is no longer useful. So, kill it off. Signed-off-by: Paul Mundt diff --git a/arch/sh/kernel/setup.c b/arch/sh/kernel/setup.c index 38515a7..00086b2 100644 --- a/arch/sh/kernel/setup.c +++ b/arch/sh/kernel/setup.c @@ -156,7 +156,7 @@ static void __init reserve_crashkernel(void) &crash_size, &crash_base); if (ret == 0 && crash_size) { if (crash_base <= 0) { - vp = alloc_bootmem_nopanic(crash_size); + vp = alloc_bootmem_nopanic(crash_size); if (!vp) { printk(KERN_INFO "crashkernel allocation " "failed\n"); @@ -185,7 +185,6 @@ static inline void __init reserve_crashkernel(void) {} #endif -#ifndef CONFIG_GENERIC_CALIBRATE_DELAY void __cpuinit calibrate_delay(void) { struct clk *clk = clk_get(NULL, "cpu_clk"); @@ -201,7 +200,6 @@ void __cpuinit calibrate_delay(void) (loops_per_jiffy/(5000/HZ)) % 100, loops_per_jiffy); } -#endif void __init __add_active_range(unsigned int nid, unsigned long start_pfn, unsigned long end_pfn) -- cgit v0.10.2 From e552de2413edad1a7b0c7f82a2f2753e4f905d93 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Wed, 21 Jan 2009 15:13:42 +0000 Subject: sh-sci: add platform device private data This patch adds per-platform private data to the sh-sci driver. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt diff --git a/drivers/serial/sh-sci.c b/drivers/serial/sh-sci.c index 728d6a0..af5da11 100644 --- a/drivers/serial/sh-sci.c +++ b/drivers/serial/sh-sci.c @@ -47,6 +47,7 @@ #include #include #include +#include #ifdef CONFIG_SUPERH #include @@ -78,6 +79,16 @@ struct sci_port { /* Port clock */ struct clk *clk; #endif + struct list_head node; +}; + +struct sh_sci_priv { + spinlock_t lock; + struct list_head ports; + +#ifdef CONFIG_HAVE_CLK + struct notifier_block clk_nb; +#endif }; #ifdef CONFIG_SERIAL_SH_SCI_CONSOLE @@ -726,19 +737,22 @@ static irqreturn_t sci_mpxed_interrupt(int irq, void *ptr) static int sci_notifier(struct notifier_block *self, unsigned long phase, void *p) { - int i; + struct sh_sci_priv *priv = container_of(self, + struct sh_sci_priv, clk_nb); + struct sci_port *sci_port; + unsigned long flags; if ((phase == CPUFREQ_POSTCHANGE) || - (phase == CPUFREQ_RESUMECHANGE)) - for (i = 0; i < SCI_NPORTS; i++) { - struct sci_port *s = &sci_ports[i]; - s->port.uartclk = clk_get_rate(s->clk); - } + (phase == CPUFREQ_RESUMECHANGE)) { + spin_lock_irqsave(&priv->lock, flags); + list_for_each_entry(sci_port, &priv->ports, node) + sci_port->port.uartclk = clk_get_rate(sci_port->clk); + + spin_unlock_irqrestore(&priv->lock, flags); + } return NOTIFY_OK; } - -static struct notifier_block sci_nb = { &sci_notifier, NULL, 0 }; #endif static int sci_request_irq(struct sci_port *port) @@ -1201,6 +1215,27 @@ static struct uart_driver sci_uart_driver = { .cons = SCI_CONSOLE, }; + +static int __devexit sci_remove(struct platform_device *dev) +{ + struct sh_sci_priv *priv = platform_get_drvdata(dev); + struct sci_port *p; + unsigned long flags; + +#ifdef CONFIG_HAVE_CLK + cpufreq_unregister_notifier(&priv->clk_nb, CPUFREQ_TRANSITION_NOTIFIER); +#endif + + spin_lock_irqsave(&priv->lock, flags); + list_for_each_entry(p, &priv->ports, node) + uart_remove_one_port(&sci_uart_driver, &p->port); + + spin_unlock_irqrestore(&priv->lock, flags); + + kfree(priv); + return 0; +} + /* * Register a set of serial devices attached to a platform device. The * list is terminated with a zero flags entry, which means we expect @@ -1210,7 +1245,22 @@ static struct uart_driver sci_uart_driver = { static int __devinit sci_probe(struct platform_device *dev) { struct plat_sci_port *p = dev->dev.platform_data; + struct sh_sci_priv *priv; int i, ret = -EINVAL; + unsigned long flags; + + priv = kzalloc(sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + INIT_LIST_HEAD(&priv->ports); + spin_lock_init(&priv->lock); + platform_set_drvdata(dev, priv); + +#ifdef CONFIG_HAVE_CLK + priv->clk_nb.notifier_call = sci_notifier; + cpufreq_register_notifier(&priv->clk_nb, CPUFREQ_TRANSITION_NOTIFIER); +#endif for (i = 0; p && p->flags != 0; p++, i++) { struct sci_port *sciport = &sci_ports[i]; @@ -1254,12 +1304,19 @@ static int __devinit sci_probe(struct platform_device *dev) memcpy(&sciport->irqs, &p->irqs, sizeof(p->irqs)); - uart_add_one_port(&sci_uart_driver, &sciport->port); - } + ret = uart_add_one_port(&sci_uart_driver, &sciport->port); -#ifdef CONFIG_HAVE_CLK - cpufreq_register_notifier(&sci_nb, CPUFREQ_TRANSITION_NOTIFIER); -#endif + if (ret && (p->flags & UPF_IOREMAP)) { + iounmap(p->membase); + goto err_unreg; + } + + INIT_LIST_HEAD(&sciport->node); + + spin_lock_irqsave(&priv->lock, flags); + list_add(&sciport->node, &priv->ports); + spin_unlock_irqrestore(&priv->lock, flags); + } #ifdef CONFIG_SH_STANDARD_BIOS sh_bios_gdb_detach(); @@ -1268,50 +1325,36 @@ static int __devinit sci_probe(struct platform_device *dev) return 0; err_unreg: - for (i = i - 1; i >= 0; i--) - uart_remove_one_port(&sci_uart_driver, &sci_ports[i].port); - + sci_remove(dev); return ret; } -static int __devexit sci_remove(struct platform_device *dev) -{ - int i; - -#ifdef CONFIG_HAVE_CLK - cpufreq_unregister_notifier(&sci_nb, CPUFREQ_TRANSITION_NOTIFIER); -#endif - - for (i = 0; i < SCI_NPORTS; i++) - uart_remove_one_port(&sci_uart_driver, &sci_ports[i].port); - - return 0; -} - static int sci_suspend(struct platform_device *dev, pm_message_t state) { - int i; + struct sh_sci_priv *priv = platform_get_drvdata(dev); + struct sci_port *p; + unsigned long flags; - for (i = 0; i < SCI_NPORTS; i++) { - struct sci_port *p = &sci_ports[i]; + spin_lock_irqsave(&priv->lock, flags); + list_for_each_entry(p, &priv->ports, node) + uart_suspend_port(&sci_uart_driver, &p->port); - if (p->type != PORT_UNKNOWN && p->port.dev == &dev->dev) - uart_suspend_port(&sci_uart_driver, &p->port); - } + spin_unlock_irqrestore(&priv->lock, flags); return 0; } static int sci_resume(struct platform_device *dev) { - int i; + struct sh_sci_priv *priv = platform_get_drvdata(dev); + struct sci_port *p; + unsigned long flags; - for (i = 0; i < SCI_NPORTS; i++) { - struct sci_port *p = &sci_ports[i]; + spin_lock_irqsave(&priv->lock, flags); + list_for_each_entry(p, &priv->ports, node) + uart_resume_port(&sci_uart_driver, &p->port); - if (p->type != PORT_UNKNOWN && p->port.dev == &dev->dev) - uart_resume_port(&sci_uart_driver, &p->port); - } + spin_unlock_irqrestore(&priv->lock, flags); return 0; } -- cgit v0.10.2 From 9080b72819650c3a757d173a19bc930d603b79d6 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Wed, 21 Jan 2009 15:13:58 +0000 Subject: sh-sci: remove early_sci_setup() Remove unused early_sci_setup() function from sh-sci. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt diff --git a/drivers/serial/sh-sci.c b/drivers/serial/sh-sci.c index af5da11..5f37f7d 100644 --- a/drivers/serial/sh-sci.c +++ b/drivers/serial/sh-sci.c @@ -1082,20 +1082,6 @@ static void __init sci_init_ports(void) } } -int __init early_sci_setup(struct uart_port *port) -{ - if (unlikely(port->line > SCI_NPORTS)) - return -ENODEV; - - sci_init_ports(); - - sci_ports[port->line].port.membase = port->membase; - sci_ports[port->line].port.mapbase = port->mapbase; - sci_ports[port->line].port.type = port->type; - - return 0; -} - #ifdef CONFIG_SERIAL_SH_SCI_CONSOLE /* * Print a string to the serial port trying not to disturb diff --git a/include/linux/serial_sci.h b/include/linux/serial_sci.h index 893cc53..717059d 100644 --- a/include/linux/serial_sci.h +++ b/include/linux/serial_sci.h @@ -27,6 +27,4 @@ struct plat_sci_port { upf_t flags; /* UPF_* flags */ }; -int early_sci_setup(struct uart_port *port); - #endif /* __LINUX_SERIAL_SCI_H */ -- cgit v0.10.2 From dc8e6f5bfcd6a307a8196d3e41fd9798be5a1c76 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Wed, 21 Jan 2009 15:14:06 +0000 Subject: sh-sci: rework serial console support Rework sh-sci serial console code. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt diff --git a/drivers/serial/sh-sci.c b/drivers/serial/sh-sci.c index 5f37f7d..d2cd1a4 100644 --- a/drivers/serial/sh-sci.c +++ b/drivers/serial/sh-sci.c @@ -91,10 +91,6 @@ struct sh_sci_priv { #endif }; -#ifdef CONFIG_SERIAL_SH_SCI_CONSOLE -static struct sci_port *serial_console_port; -#endif - /* Function prototypes */ static void sci_stop_tx(struct uart_port *port); @@ -1083,6 +1079,18 @@ static void __init sci_init_ports(void) } #ifdef CONFIG_SERIAL_SH_SCI_CONSOLE +static struct tty_driver *serial_console_device(struct console *co, int *index) +{ + struct uart_driver *p = &sci_uart_driver; + *index = co->index; + return p->tty_driver; +} + +static void serial_console_putchar(struct uart_port *port, int ch) +{ + sci_poll_put_char(port, ch); +} + /* * Print a string to the serial port trying not to disturb * any possible real use of the port... @@ -1090,16 +1098,10 @@ static void __init sci_init_ports(void) static void serial_console_write(struct console *co, const char *s, unsigned count) { - struct uart_port *port = &serial_console_port->port; + struct uart_port *port = co->data; unsigned short bits; - int i; - for (i = 0; i < count; i++) { - if (*s == 10) - sci_poll_put_char(port, '\r'); - - sci_poll_put_char(port, *s++); - } + uart_console_write(co->data, s, count, serial_console_putchar); /* wait until fifo is empty and last bit has been transmitted */ bits = SCxSR_TDxE(port) | SCxSR_TEND(port); @@ -1109,6 +1111,7 @@ static void serial_console_write(struct console *co, const char *s, static int __init serial_console_setup(struct console *co, char *options) { + struct sci_port *sci_port; struct uart_port *port; int baud = 115200; int bits = 8; @@ -1124,8 +1127,9 @@ static int __init serial_console_setup(struct console *co, char *options) if (co->index >= SCI_NPORTS) co->index = 0; - serial_console_port = &sci_ports[co->index]; - port = &serial_console_port->port; + sci_port = &sci_ports[co->index]; + port = &sci_port->port; + co->data = port; /* * Also need to check port->type, we don't actually have any @@ -1135,21 +1139,17 @@ static int __init serial_console_setup(struct console *co, char *options) */ if (!port->type) return -ENODEV; - if (!port->membase || !port->mapbase) - return -ENODEV; - - port->type = serial_console_port->type; #ifdef CONFIG_HAVE_CLK - if (!serial_console_port->clk) - serial_console_port->clk = clk_get(NULL, "module_clk"); + if (!sci_port->clk) + sci_port->clk = clk_get(NULL, "module_clk"); #endif if (port->flags & UPF_IOREMAP) sci_config_port(port, 0); - if (serial_console_port->enable) - serial_console_port->enable(port); + if (sci_port->enable) + sci_port->enable(port); if (options) uart_parse_options(options, &baud, &parity, &bits, &flow); @@ -1165,12 +1165,11 @@ static int __init serial_console_setup(struct console *co, char *options) static struct console serial_console = { .name = "ttySC", - .device = uart_console_device, + .device = serial_console_device, .write = serial_console_write, .setup = serial_console_setup, .flags = CON_PRINTBUFFER, .index = -1, - .data = &sci_uart_driver, }; static int __init sci_console_init(void) -- cgit v0.10.2 From a5660adae85918f2ab6b10ab58e2f574c1bd5ce1 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Wed, 21 Jan 2009 15:14:38 +0000 Subject: sh-sci: use to_sci_port() if possible Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt diff --git a/drivers/serial/sh-sci.c b/drivers/serial/sh-sci.c index d2cd1a4..17fa7f1 100644 --- a/drivers/serial/sh-sci.c +++ b/drivers/serial/sh-sci.c @@ -618,7 +618,7 @@ static inline int sci_handle_breaks(struct uart_port *port) int copied = 0; unsigned short status = sci_in(port, SCxSR); struct tty_struct *tty = port->info->port.tty; - struct sci_port *s = &sci_ports[port->line]; + struct sci_port *s = to_sci_port(port); if (uart_handle_break(port)) return 0; @@ -875,7 +875,7 @@ static void sci_break_ctl(struct uart_port *port, int break_state) static int sci_startup(struct uart_port *port) { - struct sci_port *s = &sci_ports[port->line]; + struct sci_port *s = to_sci_port(port); if (s->enable) s->enable(port); @@ -893,7 +893,7 @@ static int sci_startup(struct uart_port *port) static void sci_shutdown(struct uart_port *port) { - struct sci_port *s = &sci_ports[port->line]; + struct sci_port *s = to_sci_port(port); sci_stop_rx(port); sci_stop_tx(port); @@ -990,7 +990,7 @@ static int sci_request_port(struct uart_port *port) static void sci_config_port(struct uart_port *port, int flags) { - struct sci_port *s = &sci_ports[port->line]; + struct sci_port *s = to_sci_port(port); port->type = s->type; @@ -1002,7 +1002,7 @@ static void sci_config_port(struct uart_port *port, int flags) static int sci_verify_port(struct uart_port *port, struct serial_struct *ser) { - struct sci_port *s = &sci_ports[port->line]; + struct sci_port *s = to_sci_port(port); if (ser->irq != s->irqs[SCIx_TXI_IRQ] || ser->irq > nr_irqs) return -EINVAL; -- cgit v0.10.2 From 0ee70712922c15252183db8b50a7e369c96017c0 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Wed, 21 Jan 2009 15:13:50 +0000 Subject: sh-sci: allow single port platform devices Allow registration of single port sh-sci platform devices. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt diff --git a/drivers/serial/sh-sci.c b/drivers/serial/sh-sci.c index 17fa7f1..e9b350c 100644 --- a/drivers/serial/sh-sci.c +++ b/drivers/serial/sh-sci.c @@ -1221,6 +1221,70 @@ static int __devexit sci_remove(struct platform_device *dev) return 0; } +static int __devinit sci_probe_single(struct platform_device *dev, + unsigned int index, + struct plat_sci_port *p, + struct sci_port *sciport) +{ + struct sh_sci_priv *priv = platform_get_drvdata(dev); + unsigned long flags; + int ret; + + /* Sanity check */ + if (unlikely(index >= SCI_NPORTS)) { + dev_notice(&dev->dev, "Attempting to register port " + "%d when only %d are available.\n", + index+1, SCI_NPORTS); + dev_notice(&dev->dev, "Consider bumping " + "CONFIG_SERIAL_SH_SCI_NR_UARTS!\n"); + return 0; + } + + sciport->port.mapbase = p->mapbase; + + if (p->mapbase && !p->membase) { + if (p->flags & UPF_IOREMAP) { + p->membase = ioremap_nocache(p->mapbase, 0x40); + if (IS_ERR(p->membase)) + return PTR_ERR(p->membase); + } else { + /* + * For the simple (and majority of) cases + * where we don't need to do any remapping, + * just cast the cookie directly. + */ + p->membase = (void __iomem *)p->mapbase; + } + } + + sciport->port.membase = p->membase; + + sciport->port.irq = p->irqs[SCIx_TXI_IRQ]; + sciport->port.flags = p->flags; + sciport->port.dev = &dev->dev; + + sciport->type = sciport->port.type = p->type; + + memcpy(&sciport->irqs, &p->irqs, sizeof(p->irqs)); + + ret = uart_add_one_port(&sci_uart_driver, &sciport->port); + + if (ret) { + if (p->flags & UPF_IOREMAP) + iounmap(p->membase); + + return ret; + } + + INIT_LIST_HEAD(&sciport->node); + + spin_lock_irqsave(&priv->lock, flags); + list_add(&sciport->node, &priv->ports); + spin_unlock_irqrestore(&priv->lock, flags); + + return 0; +} + /* * Register a set of serial devices attached to a platform device. The * list is terminated with a zero flags entry, which means we expect @@ -1232,7 +1296,6 @@ static int __devinit sci_probe(struct platform_device *dev) struct plat_sci_port *p = dev->dev.platform_data; struct sh_sci_priv *priv; int i, ret = -EINVAL; - unsigned long flags; priv = kzalloc(sizeof(*priv), GFP_KERNEL); if (!priv) @@ -1247,60 +1310,16 @@ static int __devinit sci_probe(struct platform_device *dev) cpufreq_register_notifier(&priv->clk_nb, CPUFREQ_TRANSITION_NOTIFIER); #endif - for (i = 0; p && p->flags != 0; p++, i++) { - struct sci_port *sciport = &sci_ports[i]; - - /* Sanity check */ - if (unlikely(i == SCI_NPORTS)) { - dev_notice(&dev->dev, "Attempting to register port " - "%d when only %d are available.\n", - i+1, SCI_NPORTS); - dev_notice(&dev->dev, "Consider bumping " - "CONFIG_SERIAL_SH_SCI_NR_UARTS!\n"); - break; - } - - sciport->port.mapbase = p->mapbase; - - if (p->mapbase && !p->membase) { - if (p->flags & UPF_IOREMAP) { - p->membase = ioremap_nocache(p->mapbase, 0x40); - if (IS_ERR(p->membase)) { - ret = PTR_ERR(p->membase); - goto err_unreg; - } - } else { - /* - * For the simple (and majority of) cases - * where we don't need to do any remapping, - * just cast the cookie directly. - */ - p->membase = (void __iomem *)p->mapbase; - } - } - - sciport->port.membase = p->membase; - - sciport->port.irq = p->irqs[SCIx_TXI_IRQ]; - sciport->port.flags = p->flags; - sciport->port.dev = &dev->dev; - - sciport->type = sciport->port.type = p->type; - - memcpy(&sciport->irqs, &p->irqs, sizeof(p->irqs)); - - ret = uart_add_one_port(&sci_uart_driver, &sciport->port); - - if (ret && (p->flags & UPF_IOREMAP)) { - iounmap(p->membase); + if (dev->id != -1) { + ret = sci_probe_single(dev, dev->id, p, &sci_ports[dev->id]); + if (ret) goto err_unreg; + } else { + for (i = 0; p && p->flags != 0; p++, i++) { + ret = sci_probe_single(dev, i, p, &sci_ports[i]); + if (ret) + goto err_unreg; } - - INIT_LIST_HEAD(&sciport->node); - - spin_lock_irqsave(&priv->lock, flags); - list_add(&sciport->node, &priv->ports); - spin_unlock_irqrestore(&priv->lock, flags); } #ifdef CONFIG_SH_STANDARD_BIOS -- cgit v0.10.2 From 7ed7e0711b3ff85b3e15591081b42f2af96d584b Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Wed, 21 Jan 2009 15:14:14 +0000 Subject: sh-sci: replace sci_init_ports() Replace sci_init_ports() with sci_init_single(). Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt diff --git a/drivers/serial/sh-sci.c b/drivers/serial/sh-sci.c index e9b350c..039c700 100644 --- a/drivers/serial/sh-sci.c +++ b/drivers/serial/sh-sci.c @@ -1036,46 +1036,64 @@ static struct uart_ops sci_uart_ops = { #endif }; -static void __init sci_init_ports(void) +static int __devinit sci_init_single(struct sci_port *sci_port, + unsigned int index, + struct plat_sci_port *p) { - static int first = 1; - int i; - - if (!first) - return; - - first = 0; - - for (i = 0; i < SCI_NPORTS; i++) { - sci_ports[i].port.ops = &sci_uart_ops; - sci_ports[i].port.iotype = UPIO_MEM; - sci_ports[i].port.line = i; - sci_ports[i].port.fifosize = 1; + sci_port->port.ops = &sci_uart_ops; + sci_port->port.iotype = UPIO_MEM; + sci_port->port.line = index; + sci_port->port.fifosize = 1; #if defined(__H8300H__) || defined(__H8300S__) #ifdef __H8300S__ - sci_ports[i].enable = h8300_sci_enable; - sci_ports[i].disable = h8300_sci_disable; + sci_port->enable = h8300_sci_enable; + sci_port->disable = h8300_sci_disable; #endif - sci_ports[i].port.uartclk = CONFIG_CPU_CLOCK; + sci_port->port.uartclk = CONFIG_CPU_CLOCK; #elif defined(CONFIG_HAVE_CLK) - /* - * XXX: We should use a proper SCI/SCIF clock - */ - { - struct clk *clk = clk_get(NULL, "module_clk"); - sci_ports[i].port.uartclk = clk_get_rate(clk); - clk_put(clk); - } + /* + * XXX: We should use a proper SCI/SCIF clock + */ + { + struct clk *clk = clk_get(NULL, "module_clk"); + sci_port->port.uartclk = clk_get_rate(clk); + clk_put(clk); + } #else #error "Need a valid uartclk" #endif - sci_ports[i].break_timer.data = (unsigned long)&sci_ports[i]; - sci_ports[i].break_timer.function = sci_break_timer; + sci_port->break_timer.data = (unsigned long)sci_port; + sci_port->break_timer.function = sci_break_timer; + init_timer(&sci_port->break_timer); + + sci_port->port.mapbase = p->mapbase; - init_timer(&sci_ports[i].break_timer); + if (p->mapbase && !p->membase) { + if (p->flags & UPF_IOREMAP) { + p->membase = ioremap_nocache(p->mapbase, 0x40); + if (IS_ERR(p->membase)) + return PTR_ERR(p->membase); + } else { + /* + * For the simple (and majority of) cases + * where we don't need to do any remapping, + * just cast the cookie directly. + */ + p->membase = (void __iomem *)p->mapbase; + } } + + sci_port->port.membase = p->membase; + + sci_port->port.irq = p->irqs[SCIx_TXI_IRQ]; + sci_port->port.flags = p->flags; + sci_port->type = sci_port->port.type = p->type; + + memcpy(&sci_port->irqs, &p->irqs, sizeof(p->irqs)); + + return 0; } #ifdef CONFIG_SERIAL_SH_SCI_CONSOLE @@ -1174,7 +1192,6 @@ static struct console serial_console = { static int __init sci_console_init(void) { - sci_init_ports(); register_console(&serial_console); return 0; } @@ -1240,32 +1257,10 @@ static int __devinit sci_probe_single(struct platform_device *dev, return 0; } - sciport->port.mapbase = p->mapbase; - - if (p->mapbase && !p->membase) { - if (p->flags & UPF_IOREMAP) { - p->membase = ioremap_nocache(p->mapbase, 0x40); - if (IS_ERR(p->membase)) - return PTR_ERR(p->membase); - } else { - /* - * For the simple (and majority of) cases - * where we don't need to do any remapping, - * just cast the cookie directly. - */ - p->membase = (void __iomem *)p->mapbase; - } - } - - sciport->port.membase = p->membase; - - sciport->port.irq = p->irqs[SCIx_TXI_IRQ]; - sciport->port.flags = p->flags; - sciport->port.dev = &dev->dev; - - sciport->type = sciport->port.type = p->type; - - memcpy(&sciport->irqs, &p->irqs, sizeof(p->irqs)); + sciport->port.dev = &dev->dev; + ret = sci_init_single(sciport, index, p); + if (ret) + return ret; ret = uart_add_one_port(&sci_uart_driver, &sciport->port); @@ -1380,8 +1375,6 @@ static int __init sci_init(void) printk(banner); - sci_init_ports(); - ret = uart_register_driver(&sci_uart_driver); if (likely(ret == 0)) { ret = platform_driver_register(&sci_driver); -- cgit v0.10.2 From 08f8cb315fdf9195b472aeb440ae65b189b151da Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Wed, 21 Jan 2009 15:14:22 +0000 Subject: sh-sci: ioremap() in a single place Handle ioremap() in sci_config_port only. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt diff --git a/drivers/serial/sh-sci.c b/drivers/serial/sh-sci.c index 039c700..408624a 100644 --- a/drivers/serial/sh-sci.c +++ b/drivers/serial/sh-sci.c @@ -994,9 +994,21 @@ static void sci_config_port(struct uart_port *port, int flags) port->type = s->type; - if (port->flags & UPF_IOREMAP && !port->membase) { + if (port->membase) + return; + + if (port->flags & UPF_IOREMAP) { port->membase = ioremap_nocache(port->mapbase, 0x40); - dev_err(port->dev, "can't remap port#%d\n", port->line); + + if (IS_ERR(port->membase)) + dev_err(port->dev, "can't remap port#%d\n", port->line); + } else { + /* + * For the simple (and majority of) cases where we don't + * need to do any remapping, just cast the cookie + * directly. + */ + port->membase = (void __iomem *)port->mapbase; } } @@ -1036,9 +1048,9 @@ static struct uart_ops sci_uart_ops = { #endif }; -static int __devinit sci_init_single(struct sci_port *sci_port, - unsigned int index, - struct plat_sci_port *p) +static void __devinit sci_init_single(struct sci_port *sci_port, + unsigned int index, + struct plat_sci_port *p) { sci_port->port.ops = &sci_uart_ops; sci_port->port.iotype = UPIO_MEM; @@ -1069,22 +1081,6 @@ static int __devinit sci_init_single(struct sci_port *sci_port, init_timer(&sci_port->break_timer); sci_port->port.mapbase = p->mapbase; - - if (p->mapbase && !p->membase) { - if (p->flags & UPF_IOREMAP) { - p->membase = ioremap_nocache(p->mapbase, 0x40); - if (IS_ERR(p->membase)) - return PTR_ERR(p->membase); - } else { - /* - * For the simple (and majority of) cases - * where we don't need to do any remapping, - * just cast the cookie directly. - */ - p->membase = (void __iomem *)p->mapbase; - } - } - sci_port->port.membase = p->membase; sci_port->port.irq = p->irqs[SCIx_TXI_IRQ]; @@ -1092,8 +1088,6 @@ static int __devinit sci_init_single(struct sci_port *sci_port, sci_port->type = sci_port->port.type = p->type; memcpy(&sci_port->irqs, &p->irqs, sizeof(p->irqs)); - - return 0; } #ifdef CONFIG_SERIAL_SH_SCI_CONSOLE @@ -1163,8 +1157,7 @@ static int __init serial_console_setup(struct console *co, char *options) sci_port->clk = clk_get(NULL, "module_clk"); #endif - if (port->flags & UPF_IOREMAP) - sci_config_port(port, 0); + sci_config_port(port, 0); if (sci_port->enable) sci_port->enable(port); @@ -1258,18 +1251,11 @@ static int __devinit sci_probe_single(struct platform_device *dev, } sciport->port.dev = &dev->dev; - ret = sci_init_single(sciport, index, p); - if (ret) - return ret; + sci_init_single(sciport, index, p); ret = uart_add_one_port(&sci_uart_driver, &sciport->port); - - if (ret) { - if (p->flags & UPF_IOREMAP) - iounmap(p->membase); - + if (ret) return ret; - } INIT_LIST_HEAD(&sciport->node); -- cgit v0.10.2 From 501b825d01efb93766c87d29f299851152cf4eb0 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Wed, 21 Jan 2009 15:14:30 +0000 Subject: sh-sci: improve clock framework support Use enable/disable hooks for clock framework integration. Make sure we control the clock for the serial console as well. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt diff --git a/drivers/serial/sh-sci.c b/drivers/serial/sh-sci.c index 408624a..3daf767 100644 --- a/drivers/serial/sh-sci.c +++ b/drivers/serial/sh-sci.c @@ -76,8 +76,10 @@ struct sci_port { int break_flag; #ifdef CONFIG_HAVE_CLK - /* Port clock */ - struct clk *clk; + /* Interface clock */ + struct clk *iclk; + /* Data clock */ + struct clk *dclk; #endif struct list_head node; }; @@ -166,12 +168,12 @@ static void h8300_sci_config(struct uart_port *port, unsigned int ctrl) *mstpcrl &= ~mask; } -static inline void h8300_sci_enable(struct uart_port *port) +static void h8300_sci_enable(struct uart_port *port) { h8300_sci_config(port, sci_enable); } -static inline void h8300_sci_disable(struct uart_port *port) +static void h8300_sci_disable(struct uart_port *port) { h8300_sci_config(port, sci_disable); } @@ -742,13 +744,34 @@ static int sci_notifier(struct notifier_block *self, (phase == CPUFREQ_RESUMECHANGE)) { spin_lock_irqsave(&priv->lock, flags); list_for_each_entry(sci_port, &priv->ports, node) - sci_port->port.uartclk = clk_get_rate(sci_port->clk); + sci_port->port.uartclk = clk_get_rate(sci_port->dclk); spin_unlock_irqrestore(&priv->lock, flags); } return NOTIFY_OK; } + +static void sci_clk_enable(struct uart_port *port) +{ + struct sci_port *sci_port = to_sci_port(port); + + clk_enable(sci_port->dclk); + sci_port->port.uartclk = clk_get_rate(sci_port->dclk); + + if (sci_port->iclk) + clk_enable(sci_port->iclk); +} + +static void sci_clk_disable(struct uart_port *port) +{ + struct sci_port *sci_port = to_sci_port(port); + + if (sci_port->iclk) + clk_disable(sci_port->iclk); + + clk_disable(sci_port->dclk); +} #endif static int sci_request_irq(struct sci_port *port) @@ -880,10 +903,6 @@ static int sci_startup(struct uart_port *port) if (s->enable) s->enable(port); -#ifdef CONFIG_HAVE_CLK - s->clk = clk_get(NULL, "module_clk"); -#endif - sci_request_irq(s); sci_start_tx(port); sci_start_rx(port, 1); @@ -901,11 +920,6 @@ static void sci_shutdown(struct uart_port *port) if (s->disable) s->disable(port); - -#ifdef CONFIG_HAVE_CLK - clk_put(s->clk); - s->clk = NULL; -#endif } static void sci_set_termios(struct uart_port *port, struct ktermios *termios, @@ -1048,7 +1062,8 @@ static struct uart_ops sci_uart_ops = { #endif }; -static void __devinit sci_init_single(struct sci_port *sci_port, +static void __devinit sci_init_single(struct platform_device *dev, + struct sci_port *sci_port, unsigned int index, struct plat_sci_port *p) { @@ -1064,14 +1079,10 @@ static void __devinit sci_init_single(struct sci_port *sci_port, #endif sci_port->port.uartclk = CONFIG_CPU_CLOCK; #elif defined(CONFIG_HAVE_CLK) - /* - * XXX: We should use a proper SCI/SCIF clock - */ - { - struct clk *clk = clk_get(NULL, "module_clk"); - sci_port->port.uartclk = clk_get_rate(clk); - clk_put(clk); - } + sci_port->iclk = p->clk ? clk_get(&dev->dev, p->clk) : NULL; + sci_port->dclk = clk_get(&dev->dev, "module_clk"); + sci_port->enable = sci_clk_enable; + sci_port->disable = sci_clk_disable; #else #error "Need a valid uartclk" #endif @@ -1085,9 +1096,11 @@ static void __devinit sci_init_single(struct sci_port *sci_port, sci_port->port.irq = p->irqs[SCIx_TXI_IRQ]; sci_port->port.flags = p->flags; + sci_port->port.dev = &dev->dev; sci_port->type = sci_port->port.type = p->type; memcpy(&sci_port->irqs, &p->irqs, sizeof(p->irqs)); + } #ifdef CONFIG_SERIAL_SH_SCI_CONSOLE @@ -1111,14 +1124,21 @@ static void serial_console_write(struct console *co, const char *s, unsigned count) { struct uart_port *port = co->data; + struct sci_port *sci_port = to_sci_port(port); unsigned short bits; - uart_console_write(co->data, s, count, serial_console_putchar); + if (sci_port->enable) + sci_port->enable(port); + + uart_console_write(port, s, count, serial_console_putchar); /* wait until fifo is empty and last bit has been transmitted */ bits = SCxSR_TDxE(port) | SCxSR_TEND(port); while ((sci_in(port, SCxSR) & bits) != bits) cpu_relax(); + + if (sci_port->disable); + sci_port->disable(port); } static int __init serial_console_setup(struct console *co, char *options) @@ -1152,11 +1172,6 @@ static int __init serial_console_setup(struct console *co, char *options) if (!port->type) return -ENODEV; -#ifdef CONFIG_HAVE_CLK - if (!sci_port->clk) - sci_port->clk = clk_get(NULL, "module_clk"); -#endif - sci_config_port(port, 0); if (sci_port->enable) @@ -1171,6 +1186,7 @@ static int __init serial_console_setup(struct console *co, char *options) if (ret == 0) sci_stop_rx(port); #endif + /* TODO: disable clock */ return ret; } @@ -1250,8 +1266,7 @@ static int __devinit sci_probe_single(struct platform_device *dev, return 0; } - sciport->port.dev = &dev->dev; - sci_init_single(sciport, index, p); + sci_init_single(dev, sciport, index, p); ret = uart_add_one_port(&sci_uart_driver, &sciport->port); if (ret) diff --git a/include/linux/serial_sci.h b/include/linux/serial_sci.h index 717059d..1c297dd 100644 --- a/include/linux/serial_sci.h +++ b/include/linux/serial_sci.h @@ -25,6 +25,7 @@ struct plat_sci_port { unsigned int irqs[SCIx_NR_IRQS]; /* ERI, RXI, TXI, BRI */ unsigned int type; /* SCI / SCIF / IRDA */ upf_t flags; /* UPF_* flags */ + char *clk; /* clock string */ }; #endif /* __LINUX_SERIAL_SCI_H */ -- cgit v0.10.2 From 3b226e15beb5ecf068738e796811afd1e5b3f81f Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Fri, 8 May 2009 23:28:54 +0900 Subject: sh: Add clock id to sh-sci platform data on SH-Mobile CPUs. This adds the clock specifier to all of the SH-Mobile sh-sci ports. Impacted CPUs are SH7343/SH7366/SH7722/SH7723/SH7724. Signed-off-by: Paul Mundt diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7343.c b/arch/sh/kernel/cpu/sh4a/setup-sh7343.c index f327b7e..b9c361e 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7343.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7343.c @@ -179,21 +179,25 @@ static struct plat_sci_port sci_platform_data[] = { .flags = UPF_BOOT_AUTOCONF, .type = PORT_SCIF, .irqs = { 80, 80, 80, 80 }, + .clk = "scif0", }, { .mapbase = 0xffe10000, .flags = UPF_BOOT_AUTOCONF, .type = PORT_SCIF, .irqs = { 81, 81, 81, 81 }, + .clk = "scif1", }, { .mapbase = 0xffe20000, .flags = UPF_BOOT_AUTOCONF, .type = PORT_SCIF, .irqs = { 82, 82, 82, 82 }, + .clk = "scif2", }, { .mapbase = 0xffe30000, .flags = UPF_BOOT_AUTOCONF, .type = PORT_SCIF, .irqs = { 83, 83, 83, 83 }, + .clk = "scif3", }, { .flags = 0, } diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7366.c b/arch/sh/kernel/cpu/sh4a/setup-sh7366.c index 7361ea9..d4a994b 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7366.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7366.c @@ -186,6 +186,7 @@ static struct plat_sci_port sci_platform_data[] = { .flags = UPF_BOOT_AUTOCONF, .type = PORT_SCIF, .irqs = { 80, 80, 80, 80 }, + .clk = "scif0", }, { .flags = 0, } diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7722.c b/arch/sh/kernel/cpu/sh4a/setup-sh7722.c index b1c3e7f..5d6247f 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7722.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7722.c @@ -307,18 +307,21 @@ static struct plat_sci_port sci_platform_data[] = { .flags = UPF_BOOT_AUTOCONF, .type = PORT_SCIF, .irqs = { 80, 80, 80, 80 }, + .clk = "scif0", }, { .mapbase = 0xffe10000, .flags = UPF_BOOT_AUTOCONF, .type = PORT_SCIF, .irqs = { 81, 81, 81, 81 }, + .clk = "scif1", }, { .mapbase = 0xffe20000, .flags = UPF_BOOT_AUTOCONF, .type = PORT_SCIF, .irqs = { 82, 82, 82, 82 }, + .clk = "scif2", }, { .flags = 0, diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7723.c b/arch/sh/kernel/cpu/sh4a/setup-sh7723.c index 484ca2d..1429fc5 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7723.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7723.c @@ -321,31 +321,37 @@ static struct plat_sci_port sci_platform_data[] = { .flags = UPF_BOOT_AUTOCONF, .type = PORT_SCIF, .irqs = { 80, 80, 80, 80 }, + .clk = "scif0", },{ .mapbase = 0xffe10000, .flags = UPF_BOOT_AUTOCONF, .type = PORT_SCIF, .irqs = { 81, 81, 81, 81 }, + .clk = "scif1", },{ .mapbase = 0xffe20000, .flags = UPF_BOOT_AUTOCONF, .type = PORT_SCIF, .irqs = { 82, 82, 82, 82 }, + .clk = "scif2", },{ .mapbase = 0xa4e30000, .flags = UPF_BOOT_AUTOCONF, .type = PORT_SCIFA, .irqs = { 56, 56, 56, 56 }, + .clk = "scif3", },{ .mapbase = 0xa4e40000, .flags = UPF_BOOT_AUTOCONF, .type = PORT_SCIFA, .irqs = { 88, 88, 88, 88 }, + .clk = "scif4", },{ .mapbase = 0xa4e50000, .flags = UPF_BOOT_AUTOCONF, .type = PORT_SCIFA, .irqs = { 109, 109, 109, 109 }, + .clk = "scif5", }, { .flags = 0, } diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7724.c b/arch/sh/kernel/cpu/sh4a/setup-sh7724.c index e074951..a3039ce 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7724.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7724.c @@ -30,31 +30,37 @@ static struct plat_sci_port sci_platform_data[] = { .flags = UPF_BOOT_AUTOCONF, .type = PORT_SCIF, .irqs = { 80, 80, 80, 80 }, + .clk = "scif0", }, { .mapbase = 0xffe10000, .flags = UPF_BOOT_AUTOCONF, .type = PORT_SCIF, .irqs = { 81, 81, 81, 81 }, + .clk = "scif1", }, { .mapbase = 0xffe20000, .flags = UPF_BOOT_AUTOCONF, .type = PORT_SCIF, .irqs = { 82, 82, 82, 82 }, + .clk = "scif2", }, { .mapbase = 0xa4e30000, .flags = UPF_BOOT_AUTOCONF, .type = PORT_SCIFA, .irqs = { 56, 56, 56, 56 }, + .clk = "scif3", }, { .mapbase = 0xa4e40000, .flags = UPF_BOOT_AUTOCONF, .type = PORT_SCIFA, .irqs = { 88, 88, 88, 88 }, + .clk = "scif4", }, { .mapbase = 0xa4e50000, .flags = UPF_BOOT_AUTOCONF, .type = PORT_SCIFA, .irqs = { 109, 109, 109, 109 }, + .clk = "scif5", }, { .flags = 0, } -- cgit v0.10.2 From 54507f6ee99778a727ff1b38a1f4050fe6479835 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Fri, 8 May 2009 23:48:33 +0900 Subject: serial: sh-sci: Fix up section mismatch in error path. The sci_probe_single() path attempts to use sci_remove() for the error path, while sci_remove() is still flagged as __devexit. So, we simply discard the section annotation. Signed-off-by: Paul Mundt diff --git a/drivers/serial/sh-sci.c b/drivers/serial/sh-sci.c index 3daf767..686e4a4 100644 --- a/drivers/serial/sh-sci.c +++ b/drivers/serial/sh-sci.c @@ -1227,7 +1227,7 @@ static struct uart_driver sci_uart_driver = { }; -static int __devexit sci_remove(struct platform_device *dev) +static int sci_remove(struct platform_device *dev) { struct sh_sci_priv *priv = platform_get_drvdata(dev); struct sci_port *p; -- cgit v0.10.2 From 168f36237b16e2b3159e24c7d3b658e3c912d149 Mon Sep 17 00:00:00 2001 From: Yoshinori Sato Date: Tue, 28 Apr 2009 04:40:15 +0000 Subject: serial: sh-sci: Fix up h8300 support. - Dummy SCIF functions define. - h8300 specific header include. Signed-off-by: Yoshinori Sato Signed-off-by: Paul Mundt diff --git a/drivers/serial/sh-sci.c b/drivers/serial/sh-sci.c index 686e4a4..4e3248d 100644 --- a/drivers/serial/sh-sci.c +++ b/drivers/serial/sh-sci.c @@ -54,6 +54,10 @@ #include #endif +#ifdef CONFIG_H8300 +#include +#endif + #include "sh-sci.h" struct sci_port { diff --git a/drivers/serial/sh-sci.h b/drivers/serial/sh-sci.h index 84cc651..e3eae4e 100644 --- a/drivers/serial/sh-sci.h +++ b/drivers/serial/sh-sci.h @@ -317,7 +317,18 @@ } \ } -#define CPU_SCIF_FNS(name, scif_offset, scif_size) \ +#ifdef CONFIG_H8300 +/* h8300 don't have SCIF */ +#define CPU_SCIF_FNS(name) \ + static inline unsigned int sci_##name##_in(struct uart_port *port) \ + { \ + return 0; \ + } \ + static inline void sci_##name##_out(struct uart_port *port, unsigned int value) \ + { \ + } +#else +#define CPU_SCIF_FNS(name, scif_offset, scif_size) \ static inline unsigned int sci_##name##_in(struct uart_port *port) \ { \ SCI_IN(scif_size, scif_offset); \ @@ -326,6 +337,7 @@ { \ SCI_OUT(scif_size, scif_offset, value); \ } +#endif #define CPU_SCI_FNS(name, sci_offset, sci_size) \ static inline unsigned int sci_##name##_in(struct uart_port* port) \ @@ -363,7 +375,8 @@ sh3_scif_offset, sh3_scif_size, sh4_scif_offset, sh4_scif_size, \ h8_sci_offset, h8_sci_size) \ CPU_SCI_FNS(name, h8_sci_offset, h8_sci_size) -#define SCIF_FNS(name, sh3_scif_offset, sh3_scif_size, sh4_scif_offset, sh4_scif_size) +#define SCIF_FNS(name, sh3_scif_offset, sh3_scif_size, sh4_scif_offset, sh4_scif_size) \ + CPU_SCIF_FNS(name) #elif defined(CONFIG_CPU_SUBTYPE_SH7723) ||\ defined(CONFIG_CPU_SUBTYPE_SH7724) #define SCIx_FNS(name, sh4_scifa_offset, sh4_scifa_size, sh4_scif_offset, sh4_scif_size) \ -- cgit v0.10.2 From be6514c6295cc79498eeb9a8f933451082ca9e69 Mon Sep 17 00:00:00 2001 From: Kieran Bingham Date: Fri, 8 May 2009 15:48:15 +0100 Subject: sh: Add in some ptrace definitions from GDB. Plugs in PT_TEXT_END_ADDR/PT_TEXT_ADDR/PT_DATA_ADDR/PT_TEXT_LEN definitions. Signed-off-by: Kieran Bingham Signed-off-by: Peter Griffin Signed-off-by: Paul Mundt diff --git a/arch/sh/include/asm/ptrace.h b/arch/sh/include/asm/ptrace.h index 68e20ff..1dc12cb 100644 --- a/arch/sh/include/asm/ptrace.h +++ b/arch/sh/include/asm/ptrace.h @@ -102,6 +102,11 @@ struct pt_dspregs { #define PTRACE_GETDSPREGS 55 /* DSP registers */ #define PTRACE_SETDSPREGS 56 +#define PT_TEXT_END_ADDR 240 +#define PT_TEXT_ADDR 244 /* &(struct user)->start_code */ +#define PT_DATA_ADDR 248 /* &(struct user)->start_data */ +#define PT_TEXT_LEN 252 + #ifdef __KERNEL__ #include -- cgit v0.10.2 From e73173dbe55e5b4c2306728aad50c8e42194f6d5 Mon Sep 17 00:00:00 2001 From: Kieran Bingham Date: Fri, 8 May 2009 15:49:50 +0100 Subject: sh: Fix UBC setup and registers for SH2A Signed-off-by: Kieran Bingham Signed-off-by: Peter Griffin Signed-off-by: Paul Mundt diff --git a/arch/sh/include/asm/ubc.h b/arch/sh/include/asm/ubc.h index a7b9028..4ca4b77 100644 --- a/arch/sh/include/asm/ubc.h +++ b/arch/sh/include/asm/ubc.h @@ -42,12 +42,23 @@ #define BRCR_CMFA (1 << 15) #define BRCR_CMFB (1 << 14) + +#if defined CONFIG_CPU_SH2A +#define BRCR_CMFCA (1 << 15) +#define BRCR_CMFCB (1 << 14) +#define BRCR_CMFDA (1 << 13) +#define BRCR_CMFDB (1 << 12) +#define BRCR_PCBB (1 << 6) /* 1: after execution */ +#define BRCR_PCBA (1 << 5) /* 1: after execution */ +#define BRCR_PCTE 0 +#else #define BRCR_PCTE (1 << 11) #define BRCR_PCBA (1 << 10) /* 1: after execution */ #define BRCR_DBEB (1 << 7) #define BRCR_PCBB (1 << 6) #define BRCR_SEQ (1 << 3) #define BRCR_UBDE (1 << 0) +#endif #ifndef __ASSEMBLY__ /* arch/sh/kernel/cpu/ubc.S */ diff --git a/arch/sh/include/cpu-sh2a/cpu/ubc.h b/arch/sh/include/cpu-sh2a/cpu/ubc.h index 8ce2fc1c..1192e1c 100644 --- a/arch/sh/include/cpu-sh2a/cpu/ubc.h +++ b/arch/sh/include/cpu-sh2a/cpu/ubc.h @@ -1 +1,28 @@ -#include +/* + * SH-2A UBC definitions + * + * Copyright (C) 2008 Kieran Bingham + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ + +#ifndef __ASM_CPU_SH2A_UBC_H +#define __ASM_CPU_SH2A_UBC_H + +#define UBC_BARA 0xfffc0400 +#define UBC_BAMRA 0xfffc0404 +#define UBC_BBRA 0xfffc04a0 /* 16 bit access */ +#define UBC_BDRA 0xfffc0408 +#define UBC_BDMRA 0xfffc040c + +#define UBC_BARB 0xfffc0410 +#define UBC_BAMRB 0xfffc0414 +#define UBC_BBRB 0xfffc04b0 /* 16 bit access */ +#define UBC_BDRB 0xfffc0418 +#define UBC_BDMRB 0xfffc041c + +#define UBC_BRCR 0xfffc04c0 + +#endif /* __ASM_CPU_SH2A_UBC_H */ diff --git a/arch/sh/kernel/process_32.c b/arch/sh/kernel/process_32.c index 6d94725..9289ede 100644 --- a/arch/sh/kernel/process_32.c +++ b/arch/sh/kernel/process_32.c @@ -251,7 +251,8 @@ static void ubc_set_tracing(int asid, unsigned long pc) if (current_cpu_data.type == CPU_SH7729 || current_cpu_data.type == CPU_SH7710 || - current_cpu_data.type == CPU_SH7712) { + current_cpu_data.type == CPU_SH7712 || + current_cpu_data.type == CPU_SH7203){ ctrl_outw(BBR_INST | BBR_READ | BBR_CPU, UBC_BBRA); ctrl_outl(BRCR_PCBA | BRCR_PCTE, UBC_BRCR); } else { @@ -407,6 +408,7 @@ asmlinkage void break_point_trap(void) #else ctrl_outw(0, UBC_BBRA); ctrl_outw(0, UBC_BBRB); + ctrl_outl(0, UBC_BRCR); #endif current->thread.ubc_pc = 0; ubc_usercnt -= 1; -- cgit v0.10.2 From ba0d474082dfa37fb0efd439b4d0c0234ceb1e80 Mon Sep 17 00:00:00 2001 From: Peter Griffin Date: Fri, 8 May 2009 15:50:54 +0100 Subject: sh: Add ptrace support for NOMMU debugging Signed-off-by: Peter Griffin Signed-off-by: Paul Mundt diff --git a/arch/sh/kernel/ptrace_32.c b/arch/sh/kernel/ptrace_32.c index f7b22dd..3392e83 100644 --- a/arch/sh/kernel/ptrace_32.c +++ b/arch/sh/kernel/ptrace_32.c @@ -334,6 +334,14 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data) [(addr - (long)&dummy->fpu) >> 2]; } else if (addr == (long) &dummy->u_fpvalid) tmp = !!tsk_used_math(child); + else if (addr == PT_TEXT_ADDR) + tmp = child->mm->start_code; + else if (addr == PT_DATA_ADDR) + tmp = child->mm->start_data; + else if (addr == PT_TEXT_END_ADDR) + tmp = child->mm->end_code; + else if (addr == PT_TEXT_LEN) + tmp = child->mm->end_code - child->mm->start_code; else tmp = 0; ret = put_user(tmp, datap); -- cgit v0.10.2 From cd89436e54b29a07a383ee82f2f718d8c9d24cc4 Mon Sep 17 00:00:00 2001 From: Peter Griffin Date: Fri, 8 May 2009 15:51:51 +0100 Subject: sh: Add UBC trap vector for SH2A Signed-off-by: Peter Griffin Signed-off-by: Paul Mundt diff --git a/arch/sh/kernel/traps_32.c b/arch/sh/kernel/traps_32.c index 30ca9c5..67550d8 100644 --- a/arch/sh/kernel/traps_32.c +++ b/arch/sh/kernel/traps_32.c @@ -34,6 +34,7 @@ # define TRAP_ILLEGAL_SLOT_INST 6 # define TRAP_ADDRESS_ERROR 9 # ifdef CONFIG_CPU_SH2A +# define TRAP_UBC 12 # define TRAP_FPU_ERROR 13 # define TRAP_DIVZERO_ERROR 17 # define TRAP_DIVOVF_ERROR 18 @@ -849,6 +850,10 @@ void __init trap_init(void) #endif #endif +#ifdef TRAP_UBC + set_exception_table_vec(TRAP_UBC, break_point_trap); +#endif + /* Setup VBR for boot cpu */ per_cpu_trap_init(); } -- cgit v0.10.2 From e9e8b1fb995543c4cc3930f465923a552b2e48b7 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Sat, 9 May 2009 14:31:37 +0900 Subject: sh: Fix up the sh64 earlyprintk build. sci_rxd_in() on SH-5 wants to be using SCSPTR, not SCSPTR2. Signed-off-by: Paul Mundt diff --git a/drivers/serial/sh-sci.h b/drivers/serial/sh-sci.h index e3eae4e..38072c1 100644 --- a/drivers/serial/sh-sci.h +++ b/drivers/serial/sh-sci.h @@ -636,7 +636,7 @@ static inline int sci_rxd_in(struct uart_port *port) #elif defined(CONFIG_CPU_SUBTYPE_SH5_101) || defined(CONFIG_CPU_SUBTYPE_SH5_103) static inline int sci_rxd_in(struct uart_port *port) { - return sci_in(port, SCSPTR2)&0x0001 ? 1 : 0; /* SCIF */ + return sci_in(port, SCSPTR)&0x0001 ? 1 : 0; /* SCIF */ } #elif defined(__H8300H__) || defined(__H8300S__) static inline int sci_rxd_in(struct uart_port *port) -- cgit v0.10.2 From 2fedaacdc07e053d93e0607047a96d282f62aca2 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Sat, 9 May 2009 14:38:49 +0900 Subject: sh: Cleanup irqflags size mismatch on SH-5 build. Signed-off-by: Paul Mundt diff --git a/arch/sh/mm/cache-sh5.c b/arch/sh/mm/cache-sh5.c index 9e277ec..8676209 100644 --- a/arch/sh/mm/cache-sh5.c +++ b/arch/sh/mm/cache-sh5.c @@ -60,7 +60,7 @@ static inline void sh64_teardown_dtlb_cache_slot(void) static inline void sh64_icache_inv_all(void) { unsigned long long addr, flag, data; - unsigned int flags; + unsigned long flags; addr = ICCR0; flag = ICCR0_ICI; @@ -172,7 +172,7 @@ static void sh64_icache_inv_user_page_range(struct mm_struct *mm, unsigned long eaddr; unsigned long after_last_page_start; unsigned long mm_asid, current_asid; - unsigned long long flags = 0ULL; + unsigned long flags = 0; mm_asid = cpu_asid(smp_processor_id(), mm); current_asid = get_asid(); @@ -236,7 +236,7 @@ static void sh64_icache_inv_user_small_range(struct mm_struct *mm, unsigned long long eaddr = start; unsigned long long eaddr_end = start + len; unsigned long current_asid, mm_asid; - unsigned long long flags; + unsigned long flags; unsigned long long epage_start; /* @@ -342,7 +342,7 @@ static void inline sh64_dcache_purge_sets(int sets_to_purge_base, int n_sets) * alloco is a NOP if the cache is write-through. */ if (test_bit(SH_CACHE_MODE_WT, &(cpu_data->dcache.flags))) - ctrl_inb(eaddr); + __raw_readb((unsigned long)eaddr); } } -- cgit v0.10.2 From 6dbe47a170f80159f23c856ad4e02f2685c6f6cb Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Sat, 9 May 2009 14:44:30 +0900 Subject: sh: Provide __read_{read,write}sl() definitions for sh64. These are presently only defined for sh32, use the plain unoptimized versions for sh64. Fixes up smsc911x build. Signed-off-by: Paul Mundt diff --git a/arch/sh/include/asm/io.h b/arch/sh/include/asm/io.h index c7c360b..2534814 100644 --- a/arch/sh/include/asm/io.h +++ b/arch/sh/include/asm/io.h @@ -123,10 +123,15 @@ static inline void __raw_reads##bwlq(volatile void __iomem *mem, \ __BUILD_MEMORY_STRING(b, u8) __BUILD_MEMORY_STRING(w, u16) -__BUILD_MEMORY_STRING(q, u64) +#ifdef CONFIG_SUPERH32 void __raw_writesl(void __iomem *addr, const void *data, int longlen); void __raw_readsl(const void __iomem *addr, void *data, int longlen); +#else +__BUILD_MEMORY_STRING(l, u32) +#endif + +__BUILD_MEMORY_STRING(q, u64) #define writesb __raw_writesb #define writesw __raw_writesw -- cgit v0.10.2 From 2bcfffa42309b6f73042c62459bf5207762a271d Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Sat, 9 May 2009 16:02:08 +0900 Subject: sh: Rename opcode_t to insn_size_t. This is now clashing with a driver, so just rename it. Signed-off-by: Paul Mundt diff --git a/arch/sh/include/asm/kprobes.h b/arch/sh/include/asm/kprobes.h index 613644a..036c331 100644 --- a/arch/sh/include/asm/kprobes.h +++ b/arch/sh/include/asm/kprobes.h @@ -6,7 +6,7 @@ #include #include -typedef u16 kprobe_opcode_t; +typedef insn_size_t kprobe_opcode_t; #define BREAKPOINT_INSTRUCTION 0xc33a #define MAX_INSN_SIZE 16 diff --git a/arch/sh/include/asm/system_32.h b/arch/sh/include/asm/system_32.h index 240b31e..6c68a51 100644 --- a/arch/sh/include/asm/system_32.h +++ b/arch/sh/include/asm/system_32.h @@ -198,7 +198,7 @@ do { \ }) #endif -int handle_unaligned_access(opcode_t instruction, struct pt_regs *regs, +int handle_unaligned_access(insn_size_t instruction, struct pt_regs *regs, struct mem_access *ma); asmlinkage void do_address_error(struct pt_regs *regs, diff --git a/arch/sh/include/asm/types.h b/arch/sh/include/asm/types.h index beea4e6..b13caca 100644 --- a/arch/sh/include/asm/types.h +++ b/arch/sh/include/asm/types.h @@ -23,9 +23,9 @@ typedef unsigned short umode_t; typedef u32 dma_addr_t; #ifdef CONFIG_SUPERH32 -typedef u16 opcode_t; +typedef u16 insn_size_t; #else -typedef u32 opcode_t; +typedef u32 insn_size_t; #endif #endif /* __ASSEMBLY__ */ diff --git a/arch/sh/kernel/io_trapped.c b/arch/sh/kernel/io_trapped.c index c22853b..77dfecb 100644 --- a/arch/sh/kernel/io_trapped.c +++ b/arch/sh/kernel/io_trapped.c @@ -267,7 +267,7 @@ static struct mem_access trapped_io_access = { int handle_trapped_io(struct pt_regs *regs, unsigned long address) { mm_segment_t oldfs; - opcode_t instruction; + insn_size_t instruction; int tmp; if (!lookup_tiop(address)) diff --git a/arch/sh/kernel/kgdb.c b/arch/sh/kernel/kgdb.c index 7c747e7..305aad7 100644 --- a/arch/sh/kernel/kgdb.c +++ b/arch/sh/kernel/kgdb.c @@ -47,7 +47,7 @@ char in_nmi = 0; /* Set during NMI to prevent re-entry */ /* Calculate the new address for after a step */ static short *get_step_address(struct pt_regs *linux_regs) { - opcode_t op = __raw_readw(linux_regs->pc); + insn_size_t op = __raw_readw(linux_regs->pc); long addr; /* BT */ @@ -134,7 +134,7 @@ static short *get_step_address(struct pt_regs *linux_regs) */ static unsigned long stepped_address; -static opcode_t stepped_opcode; +static insn_size_t stepped_opcode; static void do_single_step(struct pt_regs *linux_regs) { diff --git a/arch/sh/kernel/traps.c b/arch/sh/kernel/traps.c index 438f1eb..46348ed0 100644 --- a/arch/sh/kernel/traps.c +++ b/arch/sh/kernel/traps.c @@ -22,11 +22,11 @@ static void handle_BUG(struct pt_regs *regs) int is_valid_bugaddr(unsigned long addr) { - unsigned short opcode; + insn_size_t opcode; if (addr < PAGE_OFFSET) return 0; - if (probe_kernel_address((u16 *)addr, opcode)) + if (probe_kernel_address((insn_size_t *)addr, opcode)) return 0; return opcode == TRAPA_BUG_OPCODE; @@ -66,7 +66,7 @@ BUILD_TRAP_HANDLER(bug) #ifdef CONFIG_BUG if (__kernel_text_address(instruction_pointer(regs))) { - opcode_t insn = *(opcode_t *)instruction_pointer(regs); + insn_size_t insn = *(insn_size_t *)instruction_pointer(regs); if (insn == TRAPA_BUG_OPCODE) handle_BUG(regs); } diff --git a/arch/sh/kernel/traps_32.c b/arch/sh/kernel/traps_32.c index 67550d8..2b77277 100644 --- a/arch/sh/kernel/traps_32.c +++ b/arch/sh/kernel/traps_32.c @@ -177,7 +177,7 @@ static struct mem_access user_mem_access = { * (if that instruction is in a branch delay slot) * - return 0 if emulation okay, -EFAULT on existential error */ -static int handle_unaligned_ins(opcode_t instruction, struct pt_regs *regs, +static int handle_unaligned_ins(insn_size_t instruction, struct pt_regs *regs, struct mem_access *ma) { int ret, index, count; @@ -322,10 +322,10 @@ static int handle_unaligned_ins(opcode_t instruction, struct pt_regs *regs, * - fetches the instruction from PC+2 */ static inline int handle_delayslot(struct pt_regs *regs, - opcode_t old_instruction, + insn_size_t old_instruction, struct mem_access *ma) { - opcode_t instruction; + insn_size_t instruction; void __user *addr = (void __user *)(regs->pc + instruction_size(old_instruction)); @@ -365,7 +365,7 @@ static inline int handle_delayslot(struct pt_regs *regs, static int handle_unaligned_notify_count = 10; -int handle_unaligned_access(opcode_t instruction, struct pt_regs *regs, +int handle_unaligned_access(insn_size_t instruction, struct pt_regs *regs, struct mem_access *ma) { u_int rm; @@ -523,7 +523,7 @@ asmlinkage void do_address_error(struct pt_regs *regs, unsigned long error_code = 0; mm_segment_t oldfs; siginfo_t info; - opcode_t instruction; + insn_size_t instruction; int tmp; /* Intentional ifdef */ -- cgit v0.10.2 From 1031a3a57ed76f5cb8754a89ddb22f3d9ebe8861 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Sat, 9 May 2009 17:57:21 +0900 Subject: sh: Provide an __sdivsi3_2 export for sh64. Newer code paths that are heavier in 64-bit math manage to get this generated by newer compilers, provide a definition and export accordingly. This is trivially wrapped around the existing __sdivsi3 code. Signed-off-by: Paul Mundt diff --git a/arch/sh/kernel/sh_ksyms_64.c b/arch/sh/kernel/sh_ksyms_64.c index 0d74d6b..8f54ef0 100644 --- a/arch/sh/kernel/sh_ksyms_64.c +++ b/arch/sh/kernel/sh_ksyms_64.c @@ -76,5 +76,7 @@ EXPORT_SYMBOL(strcpy); #define DECLARE_EXPORT(name) extern void name(void);EXPORT_SYMBOL(name) DECLARE_EXPORT(__sdivsi3); +DECLARE_EXPORT(__sdivsi3_1); +DECLARE_EXPORT(__sdivsi3_2); DECLARE_EXPORT(__udivsi3); DECLARE_EXPORT(__div_table); diff --git a/arch/sh/lib64/sdivsi3.S b/arch/sh/lib64/sdivsi3.S index 6a800c6..1963bbd 100644 --- a/arch/sh/lib64/sdivsi3.S +++ b/arch/sh/lib64/sdivsi3.S @@ -1,4 +1,6 @@ .global __sdivsi3 + .global __sdivsi3_1 + .global __sdivsi3_2 .section .text..SHmedia32,"ax" .align 2 @@ -6,13 +8,15 @@ /* clobbered: r1,r18,r19,r20,r21,r25,tr0 */ /* result in r0 */ __sdivsi3: +__sdivsi3_1: ptb __div_table,tr0 + gettr tr0,r20 +__sdivsi3_2: nsb r5, r1 shlld r5, r1, r25 /* normalize; [-2 ..1, 1..2) in s2.62 */ shari r25, 58, r21 /* extract 5(6) bit index (s2.4 with hole -1..1) */ /* bubble */ - gettr tr0,r20 ldx.ub r20, r21, r19 /* u0.8 */ shari r25, 32, r25 /* normalize to s2.30 */ shlli r21, 1, r21 -- cgit v0.10.2 From 7cd0378ef4c0d7b05e7dcb1daa115b841ffdc31a Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Sat, 9 May 2009 18:03:37 +0900 Subject: sh: Fix up SHmedia module ELF relocations. This fixes up the LSB setting for SHmedia branching in updated symbols when processing module relocations. Signed-off-by: Paul Mundt diff --git a/arch/sh/kernel/module.c b/arch/sh/kernel/module.c index c430810..c19b0f7 100644 --- a/arch/sh/kernel/module.c +++ b/arch/sh/kernel/module.c @@ -90,7 +90,7 @@ int apply_relocate_add(Elf32_Shdr *sechdrs, * SHmedia, the LSB of the symbol needs to be asserted * for the CPU to be in SHmedia mode when it starts executing * the branch target. */ - relocation |= (sym->st_other & 4); + relocation |= !!(sym->st_other & 4); #endif switch (ELF32_R_TYPE(rel[i].r_info)) { -- cgit v0.10.2 From c3e2586b794b12ffcdf69b4e547030b51e18e6d9 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Sat, 9 May 2009 23:33:02 +0900 Subject: sh: Integrate sh64 bits in vmlinux_32.lds.S. This adds all of the requisite bits from vmlinux_64.lds.S in to the _32 variant, resulting in a unified and generic linker script that can be shared across both. Signed-off-by: Paul Mundt diff --git a/arch/sh/kernel/vmlinux_32.lds.S b/arch/sh/kernel/vmlinux_32.lds.S index dd9b2ee..8d97f52 100644 --- a/arch/sh/kernel/vmlinux_32.lds.S +++ b/arch/sh/kernel/vmlinux_32.lds.S @@ -1,17 +1,23 @@ /* * ld script to make SuperH Linux kernel - * Written by Niibe Yutaka + * Written by Niibe Yutaka and Paul Mundt */ -#include -#include -#include - +#ifdef CONFIG_SUPERH64 +#define LOAD_OFFSET CONFIG_PAGE_OFFSET +OUTPUT_ARCH(sh:sh5) +#else +OUTPUT_ARCH(sh) #ifdef CONFIG_CPU_LITTLE_ENDIAN OUTPUT_FORMAT("elf32-sh-linux", "elf32-sh-linux", "elf32-sh-linux") #else OUTPUT_FORMAT("elf32-shbig-linux", "elf32-shbig-linux", "elf32-shbig-linux") #endif -OUTPUT_ARCH(sh) +#endif + +#include +#include +#include + ENTRY(_start) SECTIONS { @@ -24,28 +30,35 @@ SECTIONS . = CONFIG_PAGE_OFFSET + CONFIG_MEMORY_START + CONFIG_ZERO_PAGE_OFFSET; #endif - _text = .; /* Text and read-only data */ - - .empty_zero_page : { + .empty_zero_page : AT(ADDR(.empty_zero_page) - LOAD_OFFSET) { *(.empty_zero_page) } = 0 - .text : { + .text : AT(ADDR(.text) - LOAD_OFFSET) { + _text = .; /* Text and read-only data */ HEAD_TEXT TEXT_TEXT + +#ifdef CONFIG_SUPERH64 + *(.text64) + *(.text..SHmedia32) +#endif + SCHED_TEXT LOCK_TEXT KPROBES_TEXT + IRQENTRY_TEXT *(.fixup) *(.gnu.warning) + _etext = .; /* End of text section */ } = 0x0009 . = ALIGN(16); /* Exception table */ - __start___ex_table = .; - __ex_table : { *(__ex_table) } - __stop___ex_table = .; - - _etext = .; /* End of text section */ + __ex_table : AT(ADDR(__ex_table) - LOAD_OFFSET) { + __start___ex_table = .; + *(__ex_table) + __stop___ex_table = .; + } NOTES RO_DATA(PAGE_SIZE) @@ -54,13 +67,15 @@ SECTIONS * Code which must be executed uncached and the associated data */ . = ALIGN(PAGE_SIZE); - __uncached_start = .; - .uncached.text : { *(.uncached.text) } - .uncached.data : { *(.uncached.data) } - __uncached_end = .; + .uncached : AT(ADDR(.uncached) - LOAD_OFFSET) { + __uncached_start = .; + *(.uncached.text) + *(.uncached.data) + __uncached_end = .; + } . = ALIGN(THREAD_SIZE); - .data : { /* Data */ + .data : AT(ADDR(.data) - LOAD_OFFSET) { /* Data */ *(.data.init_task) . = ALIGN(L1_CACHE_BYTES); @@ -84,39 +99,51 @@ SECTIONS _edata = .; /* End of data section */ . = ALIGN(PAGE_SIZE); /* Init code and data */ - __init_begin = .; - _sinittext = .; - .init.text : { INIT_TEXT } - _einittext = .; - .init.data : { INIT_DATA } + .init.text : AT(ADDR(.init.text) - LOAD_OFFSET) { + __init_begin = .; + _sinittext = .; + INIT_TEXT + _einittext = .; + } + + .init.data : AT(ADDR(.init.data) - LOAD_OFFSET) { INIT_DATA } . = ALIGN(16); - __setup_start = .; - .init.setup : { *(.init.setup) } - __setup_end = .; + .init.setup : AT(ADDR(.init.setup) - LOAD_OFFSET) { + __setup_start = .; + *(.init.setup) + __setup_end = .; + } - __initcall_start = .; - .initcall.init : { + .initcall.init : AT(ADDR(.initcall.init) - LOAD_OFFSET) { + __initcall_start = .; INITCALLS + __initcall_end = .; + } + + .con_initcall.init : AT(ADDR(.con_initcall.init) - LOAD_OFFSET) { + __con_initcall_start = .; + *(.con_initcall.init) + __con_initcall_end = .; } - __initcall_end = .; - __con_initcall_start = .; - .con_initcall.init : { *(.con_initcall.init) } - __con_initcall_end = .; SECURITY_INIT #ifdef CONFIG_BLK_DEV_INITRD . = ALIGN(PAGE_SIZE); - __initramfs_start = .; - .init.ramfs : { *(.init.ramfs) } - __initramfs_end = .; + .init.ramfs : AT(ADDR(.init_ramfs) - LOAD_OFFSET) { + __initramfs_start = .; + *(.init.ramfs) + __initramfs_end = .; + } #endif . = ALIGN(4); - __machvec_start = .; - .machvec.init : { *(.machvec.init) } - __machvec_end = .; + .machvec.init : AT(ADDR(.machvec.init) - LOAD_OFFSET) { + __machvec_start = .; + *(.machvec.init) + __machvec_end = .; + } PERCPU(PAGE_SIZE) @@ -124,11 +151,11 @@ SECTIONS * .exit.text is discarded at runtime, not link time, to deal with * references from __bug_table */ - .exit.text : { EXIT_TEXT } - .exit.data : { EXIT_DATA } + .exit.text : AT(ADDR(.exit.text) - LOAD_OFFSET) { EXIT_TEXT } + .exit.data : AT(ADDR(.exit.data) - LOAD_OFFSET) { EXIT_DATA } . = ALIGN(PAGE_SIZE); - .bss : { + .bss : AT(ADDR(.bss) - LOAD_OFFSET) { __init_end = .; __bss_start = .; /* BSS */ *(.bss.page_aligned) -- cgit v0.10.2 From dce97c8cb2ad365fa87dc6924d99528c21c63912 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Sat, 9 May 2009 23:36:10 +0900 Subject: sh: Move the unified linker script in place, kill off old _64 one. Just forcefully rename the _32 variant overtop, and kill off the now unused _64 version. Signed-off-by: Paul Mundt diff --git a/arch/sh/kernel/vmlinux.lds.S b/arch/sh/kernel/vmlinux.lds.S index d7d4991..8d97f52 100644 --- a/arch/sh/kernel/vmlinux.lds.S +++ b/arch/sh/kernel/vmlinux.lds.S @@ -1,5 +1,181 @@ -#ifdef CONFIG_SUPERH32 -# include "vmlinux_32.lds.S" +/* + * ld script to make SuperH Linux kernel + * Written by Niibe Yutaka and Paul Mundt + */ +#ifdef CONFIG_SUPERH64 +#define LOAD_OFFSET CONFIG_PAGE_OFFSET +OUTPUT_ARCH(sh:sh5) #else -# include "vmlinux_64.lds.S" +OUTPUT_ARCH(sh) +#ifdef CONFIG_CPU_LITTLE_ENDIAN +OUTPUT_FORMAT("elf32-sh-linux", "elf32-sh-linux", "elf32-sh-linux") +#else +OUTPUT_FORMAT("elf32-shbig-linux", "elf32-shbig-linux", "elf32-shbig-linux") +#endif +#endif + +#include +#include +#include + +ENTRY(_start) +SECTIONS +{ +#ifdef CONFIG_PMB_FIXED + . = CONFIG_PAGE_OFFSET + (CONFIG_MEMORY_START & 0x1fffffff) + + CONFIG_ZERO_PAGE_OFFSET; +#elif defined(CONFIG_32BIT) + . = CONFIG_PAGE_OFFSET + CONFIG_ZERO_PAGE_OFFSET; +#else + . = CONFIG_PAGE_OFFSET + CONFIG_MEMORY_START + CONFIG_ZERO_PAGE_OFFSET; +#endif + + .empty_zero_page : AT(ADDR(.empty_zero_page) - LOAD_OFFSET) { + *(.empty_zero_page) + } = 0 + + .text : AT(ADDR(.text) - LOAD_OFFSET) { + _text = .; /* Text and read-only data */ + HEAD_TEXT + TEXT_TEXT + +#ifdef CONFIG_SUPERH64 + *(.text64) + *(.text..SHmedia32) +#endif + + SCHED_TEXT + LOCK_TEXT + KPROBES_TEXT + IRQENTRY_TEXT + *(.fixup) + *(.gnu.warning) + _etext = .; /* End of text section */ + } = 0x0009 + + . = ALIGN(16); /* Exception table */ + __ex_table : AT(ADDR(__ex_table) - LOAD_OFFSET) { + __start___ex_table = .; + *(__ex_table) + __stop___ex_table = .; + } + + NOTES + RO_DATA(PAGE_SIZE) + + /* + * Code which must be executed uncached and the associated data + */ + . = ALIGN(PAGE_SIZE); + .uncached : AT(ADDR(.uncached) - LOAD_OFFSET) { + __uncached_start = .; + *(.uncached.text) + *(.uncached.data) + __uncached_end = .; + } + + . = ALIGN(THREAD_SIZE); + .data : AT(ADDR(.data) - LOAD_OFFSET) { /* Data */ + *(.data.init_task) + + . = ALIGN(L1_CACHE_BYTES); + *(.data.cacheline_aligned) + + . = ALIGN(L1_CACHE_BYTES); + *(.data.read_mostly) + + . = ALIGN(PAGE_SIZE); + *(.data.page_aligned) + + __nosave_begin = .; + *(.data.nosave) + . = ALIGN(PAGE_SIZE); + __nosave_end = .; + + DATA_DATA + CONSTRUCTORS + } + + _edata = .; /* End of data section */ + + . = ALIGN(PAGE_SIZE); /* Init code and data */ + .init.text : AT(ADDR(.init.text) - LOAD_OFFSET) { + __init_begin = .; + _sinittext = .; + INIT_TEXT + _einittext = .; + } + + .init.data : AT(ADDR(.init.data) - LOAD_OFFSET) { INIT_DATA } + + . = ALIGN(16); + .init.setup : AT(ADDR(.init.setup) - LOAD_OFFSET) { + __setup_start = .; + *(.init.setup) + __setup_end = .; + } + + .initcall.init : AT(ADDR(.initcall.init) - LOAD_OFFSET) { + __initcall_start = .; + INITCALLS + __initcall_end = .; + } + + .con_initcall.init : AT(ADDR(.con_initcall.init) - LOAD_OFFSET) { + __con_initcall_start = .; + *(.con_initcall.init) + __con_initcall_end = .; + } + + SECURITY_INIT + +#ifdef CONFIG_BLK_DEV_INITRD + . = ALIGN(PAGE_SIZE); + .init.ramfs : AT(ADDR(.init_ramfs) - LOAD_OFFSET) { + __initramfs_start = .; + *(.init.ramfs) + __initramfs_end = .; + } #endif + + . = ALIGN(4); + .machvec.init : AT(ADDR(.machvec.init) - LOAD_OFFSET) { + __machvec_start = .; + *(.machvec.init) + __machvec_end = .; + } + + PERCPU(PAGE_SIZE) + + /* + * .exit.text is discarded at runtime, not link time, to deal with + * references from __bug_table + */ + .exit.text : AT(ADDR(.exit.text) - LOAD_OFFSET) { EXIT_TEXT } + .exit.data : AT(ADDR(.exit.data) - LOAD_OFFSET) { EXIT_DATA } + + . = ALIGN(PAGE_SIZE); + .bss : AT(ADDR(.bss) - LOAD_OFFSET) { + __init_end = .; + __bss_start = .; /* BSS */ + *(.bss.page_aligned) + *(.bss) + *(COMMON) + . = ALIGN(4); + _ebss = .; /* uClinux MTD sucks */ + _end = . ; + } + + /* + * When something in the kernel is NOT compiled as a module, the + * module cleanup code and data are put into these segments. Both + * can then be thrown away, as cleanup code is never called unless + * it's a module. + */ + /DISCARD/ : { + *(.exitcall.exit) + } + + STABS_DEBUG + DWARF_DEBUG +} diff --git a/arch/sh/kernel/vmlinux_32.lds.S b/arch/sh/kernel/vmlinux_32.lds.S deleted file mode 100644 index 8d97f52..0000000 --- a/arch/sh/kernel/vmlinux_32.lds.S +++ /dev/null @@ -1,181 +0,0 @@ -/* - * ld script to make SuperH Linux kernel - * Written by Niibe Yutaka and Paul Mundt - */ -#ifdef CONFIG_SUPERH64 -#define LOAD_OFFSET CONFIG_PAGE_OFFSET -OUTPUT_ARCH(sh:sh5) -#else -OUTPUT_ARCH(sh) -#ifdef CONFIG_CPU_LITTLE_ENDIAN -OUTPUT_FORMAT("elf32-sh-linux", "elf32-sh-linux", "elf32-sh-linux") -#else -OUTPUT_FORMAT("elf32-shbig-linux", "elf32-shbig-linux", "elf32-shbig-linux") -#endif -#endif - -#include -#include -#include - -ENTRY(_start) -SECTIONS -{ -#ifdef CONFIG_PMB_FIXED - . = CONFIG_PAGE_OFFSET + (CONFIG_MEMORY_START & 0x1fffffff) + - CONFIG_ZERO_PAGE_OFFSET; -#elif defined(CONFIG_32BIT) - . = CONFIG_PAGE_OFFSET + CONFIG_ZERO_PAGE_OFFSET; -#else - . = CONFIG_PAGE_OFFSET + CONFIG_MEMORY_START + CONFIG_ZERO_PAGE_OFFSET; -#endif - - .empty_zero_page : AT(ADDR(.empty_zero_page) - LOAD_OFFSET) { - *(.empty_zero_page) - } = 0 - - .text : AT(ADDR(.text) - LOAD_OFFSET) { - _text = .; /* Text and read-only data */ - HEAD_TEXT - TEXT_TEXT - -#ifdef CONFIG_SUPERH64 - *(.text64) - *(.text..SHmedia32) -#endif - - SCHED_TEXT - LOCK_TEXT - KPROBES_TEXT - IRQENTRY_TEXT - *(.fixup) - *(.gnu.warning) - _etext = .; /* End of text section */ - } = 0x0009 - - . = ALIGN(16); /* Exception table */ - __ex_table : AT(ADDR(__ex_table) - LOAD_OFFSET) { - __start___ex_table = .; - *(__ex_table) - __stop___ex_table = .; - } - - NOTES - RO_DATA(PAGE_SIZE) - - /* - * Code which must be executed uncached and the associated data - */ - . = ALIGN(PAGE_SIZE); - .uncached : AT(ADDR(.uncached) - LOAD_OFFSET) { - __uncached_start = .; - *(.uncached.text) - *(.uncached.data) - __uncached_end = .; - } - - . = ALIGN(THREAD_SIZE); - .data : AT(ADDR(.data) - LOAD_OFFSET) { /* Data */ - *(.data.init_task) - - . = ALIGN(L1_CACHE_BYTES); - *(.data.cacheline_aligned) - - . = ALIGN(L1_CACHE_BYTES); - *(.data.read_mostly) - - . = ALIGN(PAGE_SIZE); - *(.data.page_aligned) - - __nosave_begin = .; - *(.data.nosave) - . = ALIGN(PAGE_SIZE); - __nosave_end = .; - - DATA_DATA - CONSTRUCTORS - } - - _edata = .; /* End of data section */ - - . = ALIGN(PAGE_SIZE); /* Init code and data */ - .init.text : AT(ADDR(.init.text) - LOAD_OFFSET) { - __init_begin = .; - _sinittext = .; - INIT_TEXT - _einittext = .; - } - - .init.data : AT(ADDR(.init.data) - LOAD_OFFSET) { INIT_DATA } - - . = ALIGN(16); - .init.setup : AT(ADDR(.init.setup) - LOAD_OFFSET) { - __setup_start = .; - *(.init.setup) - __setup_end = .; - } - - .initcall.init : AT(ADDR(.initcall.init) - LOAD_OFFSET) { - __initcall_start = .; - INITCALLS - __initcall_end = .; - } - - .con_initcall.init : AT(ADDR(.con_initcall.init) - LOAD_OFFSET) { - __con_initcall_start = .; - *(.con_initcall.init) - __con_initcall_end = .; - } - - SECURITY_INIT - -#ifdef CONFIG_BLK_DEV_INITRD - . = ALIGN(PAGE_SIZE); - .init.ramfs : AT(ADDR(.init_ramfs) - LOAD_OFFSET) { - __initramfs_start = .; - *(.init.ramfs) - __initramfs_end = .; - } -#endif - - . = ALIGN(4); - .machvec.init : AT(ADDR(.machvec.init) - LOAD_OFFSET) { - __machvec_start = .; - *(.machvec.init) - __machvec_end = .; - } - - PERCPU(PAGE_SIZE) - - /* - * .exit.text is discarded at runtime, not link time, to deal with - * references from __bug_table - */ - .exit.text : AT(ADDR(.exit.text) - LOAD_OFFSET) { EXIT_TEXT } - .exit.data : AT(ADDR(.exit.data) - LOAD_OFFSET) { EXIT_DATA } - - . = ALIGN(PAGE_SIZE); - .bss : AT(ADDR(.bss) - LOAD_OFFSET) { - __init_end = .; - __bss_start = .; /* BSS */ - *(.bss.page_aligned) - *(.bss) - *(COMMON) - . = ALIGN(4); - _ebss = .; /* uClinux MTD sucks */ - _end = . ; - } - - /* - * When something in the kernel is NOT compiled as a module, the - * module cleanup code and data are put into these segments. Both - * can then be thrown away, as cleanup code is never called unless - * it's a module. - */ - /DISCARD/ : { - *(.exitcall.exit) - } - - STABS_DEBUG - DWARF_DEBUG -} diff --git a/arch/sh/kernel/vmlinux_64.lds.S b/arch/sh/kernel/vmlinux_64.lds.S deleted file mode 100644 index 6966446..0000000 --- a/arch/sh/kernel/vmlinux_64.lds.S +++ /dev/null @@ -1,163 +0,0 @@ -/* - * ld script to make SH64 Linux kernel - * - * Copyright (C) 2000, 2001 Paolo Alberelli - * - * benedict.gaster@superh.com: 2nd May 2002 - * Add definition of empty_zero_page to be the first page of kernel image. - * - * benedict.gaster@superh.com: 3rd May 2002 - * Added support for ramdisk, removing statically linked romfs at the - * same time. - * - * lethal@linux-sh.org: 9th May 2003 - * Kill off GLOBAL_NAME() usage and other CDC-isms. - * - * lethal@linux-sh.org: 19th May 2003 - * Remove support for ancient toolchains. - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ -#include -#include -#include - -#define LOAD_OFFSET CONFIG_PAGE_OFFSET -#include - -OUTPUT_ARCH(sh:sh5) - -#define C_PHYS(x) AT (ADDR(x) - LOAD_OFFSET) - -ENTRY(__start) -SECTIONS -{ - . = CONFIG_PAGE_OFFSET + CONFIG_MEMORY_START + PAGE_SIZE; - _text = .; /* Text and read-only data */ - - .empty_zero_page : C_PHYS(.empty_zero_page) { - *(.empty_zero_page) - } = 0 - - .text : C_PHYS(.text) { - HEAD_TEXT - TEXT_TEXT - *(.text64) - *(.text..SHmedia32) - SCHED_TEXT - LOCK_TEXT - KPROBES_TEXT - *(.fixup) - *(.gnu.warning) -#ifdef CONFIG_CPU_LITTLE_ENDIAN - } = 0x6ff0fff0 -#else - } = 0xf0fff06f -#endif - - /* We likely want __ex_table to be Cache Line aligned */ - . = ALIGN(L1_CACHE_BYTES); /* Exception table */ - __start___ex_table = .; - __ex_table : C_PHYS(__ex_table) { *(__ex_table) } - __stop___ex_table = .; - - _etext = .; /* End of text section */ - - NOTES - RO_DATA(PAGE_SIZE) - - . = ALIGN(THREAD_SIZE); - .data : C_PHYS(.data) { /* Data */ - *(.data.init_task) - - . = ALIGN(L1_CACHE_BYTES); - *(.data.cacheline_aligned) - - . = ALIGN(L1_CACHE_BYTES); - *(.data.read_mostly) - - . = ALIGN(PAGE_SIZE); - *(.data.page_aligned) - - __nosave_begin = .; - *(.data.nosave) - . = ALIGN(PAGE_SIZE); - __nosave_end = .; - - DATA_DATA - CONSTRUCTORS - } - - _edata = .; /* End of data section */ - - . = ALIGN(PAGE_SIZE); /* Init code and data */ - __init_begin = .; - _sinittext = .; - .init.text : C_PHYS(.init.text) { INIT_TEXT } - _einittext = .; - .init.data : C_PHYS(.init.data) { INIT_DATA } - . = ALIGN(L1_CACHE_BYTES); /* Better if Cache Line aligned */ - __setup_start = .; - .init.setup : C_PHYS(.init.setup) { *(.init.setup) } - __setup_end = .; - __initcall_start = .; - .initcall.init : C_PHYS(.initcall.init) { - INITCALLS - } - __initcall_end = .; - __con_initcall_start = .; - .con_initcall.init : C_PHYS(.con_initcall.init) { - *(.con_initcall.init) - } - __con_initcall_end = .; - - SECURITY_INIT - -#ifdef CONFIG_BLK_DEV_INITRD - . = ALIGN(PAGE_SIZE); - __initramfs_start = .; - .init.ramfs : C_PHYS(.init.ramfs) { *(.init.ramfs) } - __initramfs_end = .; -#endif - - . = ALIGN(8); - __machvec_start = .; - .machvec.init : C_PHYS(.machvec.init) { *(.machvec.init) } - __machvec_end = .; - - PERCPU(PAGE_SIZE) - - /* - * .exit.text is discarded at runtime, not link time, to deal with - * references from __bug_table - */ - .exit.text : C_PHYS(.exit.text) { EXIT_TEXT } - .exit.data : C_PHYS(.exit.data) { EXIT_DATA } - - . = ALIGN(PAGE_SIZE); - .bss : C_PHYS(.bss) { - __init_end = .; - __bss_start = .; /* BSS */ - *(.bss.page_aligned) - *(.bss) - *(COMMON) - . = ALIGN(4); - _ebss = .; /* uClinux MTD sucks */ - _end = . ; - } - - /* - * When something in the kernel is NOT compiled as a module, the - * module cleanup code and data are put into these segments. Both - * can then be thrown away, as cleanup code is never called unless - * it's a module. - */ - /DISCARD/ : { - *(.exitcall.exit) - } - - STABS_DEBUG - DWARF_DEBUG -} -- cgit v0.10.2 From 7b022d07a0fd2ce02d4456b732c674ff1d16f5ce Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Sun, 10 May 2009 00:25:08 +0900 Subject: sh: Tidy up the ldscript output format specifier. Tie this in to the Makefile directly, where we already know what we are running on. This tidies up the linker script a bit, and is prep work for unifying the arch/sh/boot/compressed linker scripts. Signed-off-by: Paul Mundt diff --git a/arch/sh/Makefile b/arch/sh/Makefile index 68348e7..b941dc9 100644 --- a/arch/sh/Makefile +++ b/arch/sh/Makefile @@ -100,13 +100,17 @@ LDFLAGS_vmlinux += --defsym phys_stext=_stext-$(CONFIG_PAGE_OFFSET) \ endif ifdef CONFIG_CPU_LITTLE_ENDIAN -LDFLAGS_vmlinux += --defsym 'jiffies=jiffies_64' +ld-bfd := elf32-$(UTS_MACHINE)-linux +LDFLAGS_vmlinux += --defsym 'jiffies=jiffies_64' --oformat $(ld-bfd) LDFLAGS += -EL else -LDFLAGS_vmlinux += --defsym 'jiffies=jiffies_64+4' +ld-bfd := elf32-$(UTS_MACHINE)big-linux +LDFLAGS_vmlinux += --defsym 'jiffies=jiffies_64+4' --oformat $(ld-bfd) LDFLAGS += -EB endif +export ld-bfd + head-y := arch/sh/kernel/init_task.o head-$(CONFIG_SUPERH32) += arch/sh/kernel/head_32.o head-$(CONFIG_SUPERH64) += arch/sh/kernel/head_64.o diff --git a/arch/sh/boot/compressed/Makefile_32 b/arch/sh/boot/compressed/Makefile_32 index b96a055..2492557 100644 --- a/arch/sh/boot/compressed/Makefile_32 +++ b/arch/sh/boot/compressed/Makefile_32 @@ -28,7 +28,8 @@ ORIG_CFLAGS := $(KBUILD_CFLAGS) KBUILD_CFLAGS = $(subst -pg, , $(ORIG_CFLAGS)) endif -LDFLAGS_vmlinux := -Ttext $(IMAGE_OFFSET) -e startup -T $(obj)/../../kernel/vmlinux.lds +LDFLAGS_vmlinux := --oformat $(ld-bfd) -Ttext $(IMAGE_OFFSET) -e startup \ + -T $(obj)/../../kernel/vmlinux.lds $(obj)/vmlinux: $(OBJECTS) $(obj)/piggy.o $(LIBGCC) FORCE $(call if_changed,ld) diff --git a/arch/sh/boot/compressed/Makefile_64 b/arch/sh/boot/compressed/Makefile_64 index 658d4f9..541a529 100644 --- a/arch/sh/boot/compressed/Makefile_64 +++ b/arch/sh/boot/compressed/Makefile_64 @@ -24,8 +24,8 @@ OBJECTS := $(obj)/vmlinux_64.lds $(obj)/head_64.o $(obj)/misc_64.o \ ZIMAGE_OFFSET := $(shell /bin/bash -c 'printf "0x%08x" \ $$[$(CONFIG_PAGE_OFFSET)+0x400000+0x10000]') -LDFLAGS_vmlinux := -Ttext $(ZIMAGE_OFFSET) -e startup \ - -T $(obj)/../../kernel/vmlinux.lds +LDFLAGS_vmlinux := --oformat $(ld-bfd) -Ttext $(ZIMAGE_OFFSET) -e startup \ + -T $(obj)/../../kernel/vmlinux.lds $(obj)/vmlinux: $(OBJECTS) $(obj)/piggy.o FORCE $(call if_changed,ld) diff --git a/arch/sh/kernel/vmlinux.lds.S b/arch/sh/kernel/vmlinux.lds.S index 8d97f52..1a2c8db 100644 --- a/arch/sh/kernel/vmlinux.lds.S +++ b/arch/sh/kernel/vmlinux.lds.S @@ -6,12 +6,8 @@ #define LOAD_OFFSET CONFIG_PAGE_OFFSET OUTPUT_ARCH(sh:sh5) #else +#define LOAD_OFFSET 0 OUTPUT_ARCH(sh) -#ifdef CONFIG_CPU_LITTLE_ENDIAN -OUTPUT_FORMAT("elf32-sh-linux", "elf32-sh-linux", "elf32-sh-linux") -#else -OUTPUT_FORMAT("elf32-shbig-linux", "elf32-shbig-linux", "elf32-shbig-linux") -#endif #endif #include -- cgit v0.10.2 From 20b27fa33743c6ef77a1248421fab51e8bf21a25 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Sun, 10 May 2009 00:36:22 +0900 Subject: sh: Fix up the sh64 zImage build. Signed-off-by: Paul Mundt diff --git a/arch/sh/boot/compressed/Makefile_64 b/arch/sh/boot/compressed/Makefile_64 index 541a529..7093255 100644 --- a/arch/sh/boot/compressed/Makefile_64 +++ b/arch/sh/boot/compressed/Makefile_64 @@ -14,8 +14,7 @@ targets := vmlinux vmlinux.bin vmlinux.bin.gz \ head_64.o misc_64.o cache.o piggy.o -OBJECTS := $(obj)/vmlinux_64.lds $(obj)/head_64.o $(obj)/misc_64.o \ - $(obj)/cache.o +OBJECTS := $(obj)/head_64.o $(obj)/misc_64.o $(obj)/cache.o # # ZIMAGE_OFFSET is the load offset of the compression loader diff --git a/arch/sh/boot/compressed/head_64.S b/arch/sh/boot/compressed/head_64.S index 622eac3..9993113 100644 --- a/arch/sh/boot/compressed/head_64.S +++ b/arch/sh/boot/compressed/head_64.S @@ -14,6 +14,7 @@ * Copyright (C) 2002 Stuart Menefy (stuart.menefy@st.com) */ #include +#include #include #include @@ -33,11 +34,7 @@ #define ICCR0_INIT_VAL ICCR0_ON | ICCR0_ICI /* ICE + ICI */ #define ICCR1_INIT_VAL ICCR1_NOLOCK /* No locking */ -#if 1 #define OCCR0_INIT_VAL OCCR0_ON | OCCR0_OCI | OCCR0_WB /* OCE + OCI + WB */ -#else -#define OCCR0_INIT_VAL OCCR0_OFF -#endif #define OCCR1_INIT_VAL OCCR1_NOLOCK /* No locking */ .text diff --git a/arch/sh/boot/compressed/vmlinux_64.lds b/arch/sh/boot/compressed/vmlinux_64.lds deleted file mode 100644 index 59c2ef4..0000000 --- a/arch/sh/boot/compressed/vmlinux_64.lds +++ /dev/null @@ -1,64 +0,0 @@ -/* - * ld script to make compressed SuperH/shmedia Linux kernel+decompression - * bootstrap - * Modified by Stuart Menefy from arch/sh/vmlinux.lds.S written by Niibe Yutaka - */ - - -#ifdef CONFIG_LITTLE_ENDIAN -/* OUTPUT_FORMAT("elf32-sh64l-linux", "elf32-sh64l-linux", "elf32-sh64l-linux") */ -#define NOP 0x6ff0fff0 -#else -/* OUTPUT_FORMAT("elf32-sh64", "elf32-sh64", "elf32-sh64") */ -#define NOP 0xf0fff06f -#endif - -OUTPUT_FORMAT("elf32-sh64-linux") -OUTPUT_ARCH(sh) -ENTRY(_start) - -#define ALIGNED_GAP(section, align) (((ADDR(section)+SIZEOF(section)+(align)-1) & ~((align)-1))-ADDR(section)) -#define FOLLOWING(section, align) AT (LOADADDR(section) + ALIGNED_GAP(section,align)) - -SECTIONS -{ - _text = .; /* Text and read-only data */ - - .text : { - *(.text) - *(.text64) - *(.text..SHmedia32) - *(.fixup) - *(.gnu.warning) - } = NOP - . = ALIGN(4); - .rodata : { *(.rodata) } - - /* There is no 'real' reason for eight byte alignment, four would work - * as well, but gdb downloads much (*4) faster with this. - */ - . = ALIGN(8); - .image : { *(.image) } - . = ALIGN(4); - _etext = .; /* End of text section */ - - .data : /* Data */ - FOLLOWING(.image, 4) - { - _data = .; - *(.data) - } - _data_image = LOADADDR(.data);/* Address of data section in ROM */ - - _edata = .; /* End of data section */ - - .stack : { stack = .; _stack = .; } - - . = ALIGN(4); - __bss_start = .; /* BSS */ - .bss : { - *(.bss) - } - . = ALIGN(4); - _end = . ; -} -- cgit v0.10.2 From a2e76c80d93ec3c59a030b6ca37b9087033565c1 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Sun, 10 May 2009 00:54:39 +0900 Subject: sh: Provide a tighter BOOT_LINK_OFFSET definition for the Cayman board. Signed-off-by: Paul Mundt diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig index 6ed16c4..bca6a2a 100644 --- a/arch/sh/Kconfig +++ b/arch/sh/Kconfig @@ -704,6 +704,7 @@ config ZERO_PAGE_OFFSET config BOOT_LINK_OFFSET hex "Link address offset for booting" + default "0x00400000" if SH_CAYMAN default "0x00800000" help This option allows you to set the link address offset of the zImage. -- cgit v0.10.2 From b20883562455060272126c36563a7d8edafc30d3 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Sun, 10 May 2009 00:55:45 +0900 Subject: sh: Provide a BITS definition, use it in the arch/sh/boot/ Makefiles. This introduces a BITS export that can handily be picked up by Makefiles for cleaner sharing. Reflect its use in arch/sh/boot/compressed/ in preparation for unifying the Makefiles. Signed-off-by: Paul Mundt diff --git a/arch/sh/Makefile b/arch/sh/Makefile index b941dc9..c1bbae1 100644 --- a/arch/sh/Makefile +++ b/arch/sh/Makefile @@ -91,9 +91,11 @@ KBUILD_IMAGE := $(defaultimage-y) # ifdef CONFIG_SUPERH32 UTS_MACHINE := sh +BITS := 32 LDFLAGS_vmlinux += -e _stext else UTS_MACHINE := sh64 +BITS := 64 LDFLAGS_vmlinux += --defsym phys_stext=_stext-$(CONFIG_PAGE_OFFSET) \ --defsym phys_stext_shmedia=phys_stext+1 \ -e phys_stext_shmedia @@ -109,11 +111,9 @@ LDFLAGS_vmlinux += --defsym 'jiffies=jiffies_64+4' --oformat $(ld-bfd) LDFLAGS += -EB endif -export ld-bfd +export ld-bfd BITS -head-y := arch/sh/kernel/init_task.o -head-$(CONFIG_SUPERH32) += arch/sh/kernel/head_32.o -head-$(CONFIG_SUPERH64) += arch/sh/kernel/head_64.o +head-y := arch/sh/kernel/init_task.o arch/sh/kernel/head_$(BITS).o core-y += arch/sh/kernel/ arch/sh/mm/ arch/sh/boards/ core-$(CONFIG_SH_FPU_EMU) += arch/sh/math-emu/ diff --git a/arch/sh/boot/Makefile b/arch/sh/boot/Makefile index 95483d1..78efb04 100644 --- a/arch/sh/boot/Makefile +++ b/arch/sh/boot/Makefile @@ -20,9 +20,6 @@ CONFIG_BOOT_LINK_OFFSET ?= 0x00800000 CONFIG_ZERO_PAGE_OFFSET ?= 0x00001000 CONFIG_ENTRY_OFFSET ?= 0x00001000 -export CONFIG_PAGE_OFFSET CONFIG_MEMORY_START CONFIG_BOOT_LINK_OFFSET \ - CONFIG_ZERO_PAGE_OFFSET CONFIG_ENTRY_OFFSET - targets := zImage vmlinux.srec uImage uImage.srec subdir- := compressed @@ -43,6 +40,9 @@ KERNEL_MEMORY := $(shell /bin/bash -c 'printf "0x%08x" \ $$[$(CONFIG_MEMORY_START)]') endif +export CONFIG_PAGE_OFFSET CONFIG_MEMORY_START CONFIG_BOOT_LINK_OFFSET \ + CONFIG_ZERO_PAGE_OFFSET CONFIG_ENTRY_OFFSET KERNEL_MEMORY + KERNEL_LOAD := $(shell /bin/bash -c 'printf "0x%08x" \ $$[$(CONFIG_PAGE_OFFSET) + \ $(KERNEL_MEMORY) + \ diff --git a/arch/sh/boot/compressed/Makefile b/arch/sh/boot/compressed/Makefile index efb01dc..f0a71df 100644 --- a/arch/sh/boot/compressed/Makefile +++ b/arch/sh/boot/compressed/Makefile @@ -1,5 +1 @@ -ifeq ($(CONFIG_SUPERH32),y) include ${srctree}/arch/sh/boot/compressed/Makefile_32 -else -include ${srctree}/arch/sh/boot/compressed/Makefile_64 -endif diff --git a/arch/sh/boot/compressed/Makefile_32 b/arch/sh/boot/compressed/Makefile_32 index 2492557..9531bf1 100644 --- a/arch/sh/boot/compressed/Makefile_32 +++ b/arch/sh/boot/compressed/Makefile_32 @@ -5,9 +5,9 @@ # targets := vmlinux vmlinux.bin vmlinux.bin.gz \ - head_32.o misc_32.o piggy.o + head_$(BITS).o misc_$(BITS).o piggy.o -OBJECTS = $(obj)/head_32.o $(obj)/misc_32.o +OBJECTS = $(obj)/head_$(BITS).o $(obj)/misc_$(BITS).o $(obj)/cache.o ifdef CONFIG_SH_STANDARD_BIOS OBJECTS += $(obj)/../../kernel/sh_bios.o @@ -18,7 +18,7 @@ endif # IMAGE_OFFSET := $(shell /bin/bash -c 'printf "0x%08x" \ $$[$(CONFIG_PAGE_OFFSET) + \ - $(CONFIG_MEMORY_START) + \ + $(KERNEL_MEMORY) + \ $(CONFIG_BOOT_LINK_OFFSET)]') LIBGCC := $(shell $(CC) $(KBUILD_CFLAGS) -print-libgcc-file-name) -- cgit v0.10.2 From 1eca133cc9f978a8c44788fc5b2fe54219f9425c Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Sun, 10 May 2009 00:58:21 +0900 Subject: sh: Merge the split arch/sh/boot/compressed/ Makefiles. This kills off the _64 variant and moves the _32 one over as the generic one to use. Signed-off-by: Paul Mundt diff --git a/arch/sh/boot/compressed/Makefile b/arch/sh/boot/compressed/Makefile index f0a71df..9531bf1 100644 --- a/arch/sh/boot/compressed/Makefile +++ b/arch/sh/boot/compressed/Makefile @@ -1 +1,47 @@ -include ${srctree}/arch/sh/boot/compressed/Makefile_32 +# +# linux/arch/sh/boot/compressed/Makefile +# +# create a compressed vmlinux image from the original vmlinux +# + +targets := vmlinux vmlinux.bin vmlinux.bin.gz \ + head_$(BITS).o misc_$(BITS).o piggy.o + +OBJECTS = $(obj)/head_$(BITS).o $(obj)/misc_$(BITS).o $(obj)/cache.o + +ifdef CONFIG_SH_STANDARD_BIOS +OBJECTS += $(obj)/../../kernel/sh_bios.o +endif + +# +# IMAGE_OFFSET is the load offset of the compression loader +# +IMAGE_OFFSET := $(shell /bin/bash -c 'printf "0x%08x" \ + $$[$(CONFIG_PAGE_OFFSET) + \ + $(KERNEL_MEMORY) + \ + $(CONFIG_BOOT_LINK_OFFSET)]') + +LIBGCC := $(shell $(CC) $(KBUILD_CFLAGS) -print-libgcc-file-name) + +ifeq ($(CONFIG_FUNCTION_TRACER),y) +ORIG_CFLAGS := $(KBUILD_CFLAGS) +KBUILD_CFLAGS = $(subst -pg, , $(ORIG_CFLAGS)) +endif + +LDFLAGS_vmlinux := --oformat $(ld-bfd) -Ttext $(IMAGE_OFFSET) -e startup \ + -T $(obj)/../../kernel/vmlinux.lds + +$(obj)/vmlinux: $(OBJECTS) $(obj)/piggy.o $(LIBGCC) FORCE + $(call if_changed,ld) + @: + +$(obj)/vmlinux.bin: vmlinux FORCE + $(call if_changed,objcopy) + +$(obj)/vmlinux.bin.gz: $(obj)/vmlinux.bin FORCE + $(call if_changed,gzip) + +OBJCOPYFLAGS += -R .empty_zero_page + +$(obj)/piggy.o: $(obj)/piggy.S $(obj)/vmlinux.bin.gz FORCE + $(call if_changed,as_o_S) diff --git a/arch/sh/boot/compressed/Makefile_32 b/arch/sh/boot/compressed/Makefile_32 deleted file mode 100644 index 9531bf1..0000000 --- a/arch/sh/boot/compressed/Makefile_32 +++ /dev/null @@ -1,47 +0,0 @@ -# -# linux/arch/sh/boot/compressed/Makefile -# -# create a compressed vmlinux image from the original vmlinux -# - -targets := vmlinux vmlinux.bin vmlinux.bin.gz \ - head_$(BITS).o misc_$(BITS).o piggy.o - -OBJECTS = $(obj)/head_$(BITS).o $(obj)/misc_$(BITS).o $(obj)/cache.o - -ifdef CONFIG_SH_STANDARD_BIOS -OBJECTS += $(obj)/../../kernel/sh_bios.o -endif - -# -# IMAGE_OFFSET is the load offset of the compression loader -# -IMAGE_OFFSET := $(shell /bin/bash -c 'printf "0x%08x" \ - $$[$(CONFIG_PAGE_OFFSET) + \ - $(KERNEL_MEMORY) + \ - $(CONFIG_BOOT_LINK_OFFSET)]') - -LIBGCC := $(shell $(CC) $(KBUILD_CFLAGS) -print-libgcc-file-name) - -ifeq ($(CONFIG_FUNCTION_TRACER),y) -ORIG_CFLAGS := $(KBUILD_CFLAGS) -KBUILD_CFLAGS = $(subst -pg, , $(ORIG_CFLAGS)) -endif - -LDFLAGS_vmlinux := --oformat $(ld-bfd) -Ttext $(IMAGE_OFFSET) -e startup \ - -T $(obj)/../../kernel/vmlinux.lds - -$(obj)/vmlinux: $(OBJECTS) $(obj)/piggy.o $(LIBGCC) FORCE - $(call if_changed,ld) - @: - -$(obj)/vmlinux.bin: vmlinux FORCE - $(call if_changed,objcopy) - -$(obj)/vmlinux.bin.gz: $(obj)/vmlinux.bin FORCE - $(call if_changed,gzip) - -OBJCOPYFLAGS += -R .empty_zero_page - -$(obj)/piggy.o: $(obj)/piggy.S $(obj)/vmlinux.bin.gz FORCE - $(call if_changed,as_o_S) diff --git a/arch/sh/boot/compressed/Makefile_64 b/arch/sh/boot/compressed/Makefile_64 deleted file mode 100644 index 7093255..0000000 --- a/arch/sh/boot/compressed/Makefile_64 +++ /dev/null @@ -1,42 +0,0 @@ -# -# arch/sh/boot/compressed/Makefile_64 -# -# create a compressed vmlinux image from the original vmlinux -# -# Copyright (C) 2002 Stuart Menefy -# Copyright (C) 2004 Paul Mundt -# -# This file is subject to the terms and conditions of the GNU General Public -# License. See the file "COPYING" in the main directory of this archive -# for more details. -# - -targets := vmlinux vmlinux.bin vmlinux.bin.gz \ - head_64.o misc_64.o cache.o piggy.o - -OBJECTS := $(obj)/head_64.o $(obj)/misc_64.o $(obj)/cache.o - -# -# ZIMAGE_OFFSET is the load offset of the compression loader -# (4M for the kernel plus 64K for this loader) -# -ZIMAGE_OFFSET := $(shell /bin/bash -c 'printf "0x%08x" \ - $$[$(CONFIG_PAGE_OFFSET)+0x400000+0x10000]') - -LDFLAGS_vmlinux := --oformat $(ld-bfd) -Ttext $(ZIMAGE_OFFSET) -e startup \ - -T $(obj)/../../kernel/vmlinux.lds - -$(obj)/vmlinux: $(OBJECTS) $(obj)/piggy.o FORCE - $(call if_changed,ld) - @: - -$(obj)/vmlinux.bin: vmlinux FORCE - $(call if_changed,objcopy) - -$(obj)/vmlinux.bin.gz: $(obj)/vmlinux.bin FORCE - $(call if_changed,gzip) - -OBJCOPYFLAGS += -R .empty_zero_page - -$(obj)/piggy.o: $(obj)/piggy.S $(obj)/vmlinux.bin.gz FORCE - $(call if_changed,as_o_S) -- cgit v0.10.2 From b412a49af970e703124fa3259bf24165c0c74024 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Sun, 10 May 2009 01:23:25 +0900 Subject: sh: Consolidate the boot link and entry offset definitions. Consolidate these in a single place in the Kconfig menus. At the same time, disable their interactivity and set them according to the board config defaults. Signed-off-by: Paul Mundt diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig index bca6a2a..a9dee13 100644 --- a/arch/sh/Kconfig +++ b/arch/sh/Kconfig @@ -694,23 +694,37 @@ endmenu menu "Boot options" config ZERO_PAGE_OFFSET - hex "Zero page offset" - default "0x00004000" if SH_SH03 - default "0x00010000" if PAGE_SIZE_64KB + hex + default "0x00010000" if PAGE_SIZE_64KB || SH_RTS7751R2D || \ + SH_7751_SOLUTION_ENGINE + default "0x00004000" if PAGE_SIZE_16KB || SH_SH03 default "0x00002000" if PAGE_SIZE_8KB default "0x00001000" help This sets the default offset of zero page. config BOOT_LINK_OFFSET - hex "Link address offset for booting" + hex + default "0x00210000" if SH_SHMIN default "0x00400000" if SH_CAYMAN + default "0x00810000" if SH_7780_SOLUTION_ENGINE + default "0x009e0000" if SH_TITAN + default "0x01800000" if SH_SDK7780 + default "0x02000000" if SH_EDOSK7760 default "0x00800000" help This option allows you to set the link address offset of the zImage. This can be useful if you are on a board which has a small amount of memory. +config ENTRY_OFFSET + hex + default "0x00001000" if PAGE_SIZE_4KB + default "0x00002000" if PAGE_SIZE_8KB + default "0x00004000" if PAGE_SIZE_16KB + default "0x00010000" if PAGE_SIZE_64KB + default "0x00000000" + config UBC_WAKEUP bool "Wakeup UBC on startup" depends on CPU_SH4 && !CPU_SH4A diff --git a/arch/sh/mm/Kconfig b/arch/sh/mm/Kconfig index d4079ca..b900d2cd 100644 --- a/arch/sh/mm/Kconfig +++ b/arch/sh/mm/Kconfig @@ -201,14 +201,6 @@ config PAGE_SIZE_64KB endchoice -config ENTRY_OFFSET - hex - default "0x00001000" if PAGE_SIZE_4KB - default "0x00002000" if PAGE_SIZE_8KB - default "0x00004000" if PAGE_SIZE_16KB - default "0x00010000" if PAGE_SIZE_64KB - default "0x00000000" - choice prompt "HugeTLB page size" depends on HUGETLB_PAGE && (CPU_SH4 || CPU_SH5) && MMU -- cgit v0.10.2 From 457daa2b66e07bbd2280b9f8d2b03e800f357243 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Sun, 10 May 2009 01:28:01 +0900 Subject: sh: Hook up cc-cross-prefix support. This implements a simple case that just iterates through the common cases, looking at UTS_MACHINE for hints. Signed-off-by: Paul Mundt diff --git a/arch/sh/Makefile b/arch/sh/Makefile index c1bbae1..a47fbd2 100644 --- a/arch/sh/Makefile +++ b/arch/sh/Makefile @@ -101,6 +101,12 @@ LDFLAGS_vmlinux += --defsym phys_stext=_stext-$(CONFIG_PAGE_OFFSET) \ -e phys_stext_shmedia endif +ifneq ($(SUBARCH),$(ARCH)) + ifeq ($(CROSS_COMPILE),) + CROSS_COMPILE := $(call cc-cross-prefix, $(UTS_MACHINE)-linux- $(UTS_MACHINE)-linux-gnu- $(UTS_MACHINE)-unknown-linux-gnu-) + endif +endif + ifdef CONFIG_CPU_LITTLE_ENDIAN ld-bfd := elf32-$(UTS_MACHINE)-linux LDFLAGS_vmlinux += --defsym 'jiffies=jiffies_64' --oformat $(ld-bfd) -- cgit v0.10.2 From 567bb8fd47624cb9f894c64ce9530d43d5862a71 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Sun, 10 May 2009 14:25:39 +0900 Subject: sh: Fix up R0 dependence in __arch_swab16/32. There is nothing in these routines that inherently depends on R0 use. Given that these routines are inlined, it is rather easy to blow up the compiler by exhausting the spill class when performing a 64-bit swab. This presently manifests itself as the following: CC fs/ocfs2/suballoc.o fs/ocfs2/suballoc.c: In function 'ocfs2_reserve_suballoc_bits': fs/ocfs2/suballoc.c:638: error: unrecognizable insn: (insn 2793 1230 1231 103 arch/sh/include/asm/swab.h:33 (set (reg:HI 853) (subreg:HI (reg:SI 149 macl) 2)) -1 (expr_list:REG_DEAD (reg:SI 149 macl) (nil))) fs/ocfs2/suballoc.c:638: internal compiler error: in extract_insn, at recog.c:1991 This patch switches over to using an arbitrarily assigned register instead. While the same issue does not exist in the SH-5 case, there is likewise no harm in having an alternate register used for the byterev/shari pair. Signed-off-by: Paul Mundt diff --git a/arch/sh/include/asm/swab.h b/arch/sh/include/asm/swab.h index e693159..0e08fe5 100644 --- a/arch/sh/include/asm/swab.h +++ b/arch/sh/include/asm/swab.h @@ -14,15 +14,15 @@ static inline __attribute_const__ __u32 __arch_swab32(__u32 x) { __asm__( #ifdef __SH5__ - "byterev %0, %0\n\t" + "byterev %1, %0\n\t" "shari %0, 32, %0" #else - "swap.b %0, %0\n\t" + "swap.b %1, %0\n\t" "swap.w %0, %0\n\t" "swap.b %0, %0" #endif : "=r" (x) - : "0" (x)); + : "r" (x)); return x; } @@ -32,13 +32,13 @@ static inline __attribute_const__ __u16 __arch_swab16(__u16 x) { __asm__( #ifdef __SH5__ - "byterev %0, %0\n\t" + "byterev %1, %0\n\t" "shari %0, 32, %0" #else - "swap.b %0, %0" + "swap.b %1, %0" #endif : "=r" (x) - : "0" (x)); + : "r" (x)); return x; } -- cgit v0.10.2 From d9d674e50007362567edb5df65c05dd56a5964bf Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Mon, 11 May 2009 12:12:38 +0900 Subject: sh: Fix up typo in arch/sh/kernel/vmlinux.lds.S .init_ramfs ought to be .init.ramfs, fix it up. Signed-off-by: Paul Mundt diff --git a/arch/sh/kernel/vmlinux.lds.S b/arch/sh/kernel/vmlinux.lds.S index 1a2c8db..d737230 100644 --- a/arch/sh/kernel/vmlinux.lds.S +++ b/arch/sh/kernel/vmlinux.lds.S @@ -127,7 +127,7 @@ SECTIONS #ifdef CONFIG_BLK_DEV_INITRD . = ALIGN(PAGE_SIZE); - .init.ramfs : AT(ADDR(.init_ramfs) - LOAD_OFFSET) { + .init.ramfs : AT(ADDR(.init.ramfs) - LOAD_OFFSET) { __initramfs_start = .; *(.init.ramfs) __initramfs_end = .; -- cgit v0.10.2 From 780f98ff1fa9cfcab177f6b5ab09b11321f1e5c8 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Mon, 11 May 2009 12:15:14 +0900 Subject: sh: Account for INITIAL_JIFFIES when using jiffies clocksource. In the case where we fall back on the generic jiffies clocksource, INITIAL_JIFFIES needs to be accounted for so that printk times aren't completely skewed. Signed-off-by: Paul Mundt diff --git a/arch/sh/kernel/time.c b/arch/sh/kernel/time.c index e0aa769..a77838f 100644 --- a/arch/sh/kernel/time.c +++ b/arch/sh/kernel/time.c @@ -104,7 +104,7 @@ unsigned long long sched_clock(void) /* jiffies based sched_clock if no clocksource is installed */ if (!clocksource_sh.rating) - return (unsigned long long)jiffies * (NSEC_PER_SEC / HZ); + return (jiffies_64 - INITIAL_JIFFIES) * (NSEC_PER_SEC / HZ); cycles = clocksource_sh.read(&clocksource_sh); return cyc2ns(&clocksource_sh, cycles); -- cgit v0.10.2 From 7bce6c2740fab36708233e998a9e53115649b193 Mon Sep 17 00:00:00 2001 From: Yoshihiro Shimoda Date: Mon, 11 May 2009 06:51:28 +0000 Subject: sh: sh7785lcr: fix I2C device address map for 32-bit mode This fixes up the broken I2C offset in 32-bit mode. The cause is because the board datasheet had a mistake. Signed-off-by: Yoshihiro Shimoda Signed-off-by: Paul Mundt diff --git a/arch/sh/include/mach-common/mach/sh7785lcr.h b/arch/sh/include/mach-common/mach/sh7785lcr.h index 1ce27d5..90011d4 100644 --- a/arch/sh/include/mach-common/mach/sh7785lcr.h +++ b/arch/sh/include/mach-common/mach/sh7785lcr.h @@ -9,11 +9,11 @@ * -----------------------------+---------------+--------------- * 0x00000000 - 0x03ffffff(CS0) | NOR Flash | NOR Flash * 0x04000000 - 0x05ffffff(CS1) | PLD | PLD - * 0x06000000 - 0x07ffffff(CS1) | reserved | I2C + * 0x06000000 - 0x07ffffff(CS1) | I2C | I2C * 0x08000000 - 0x0bffffff(CS2) | USB | DDR SDRAM * 0x0c000000 - 0x0fffffff(CS3) | SD | DDR SDRAM * 0x10000000 - 0x13ffffff(CS4) | SM107 | SM107 - * 0x14000000 - 0x17ffffff(CS5) | I2C | USB + * 0x14000000 - 0x17ffffff(CS5) | reserved | USB * 0x18000000 - 0x1bffffff(CS6) | reserved | SD * 0x40000000 - 0x5fffffff | DDR SDRAM | (cannot use) * @@ -32,6 +32,9 @@ #define PLD_VERSR (PLD_BASE_ADDR + 0x0c) #define PLD_MMSR (PLD_BASE_ADDR + 0x0e) +#define PCA9564_ADDR 0x06000000 /* I2C */ +#define PCA9564_SIZE 0x00000100 + #define SM107_MEM_ADDR 0x10000000 #define SM107_MEM_SIZE 0x00e00000 #define SM107_REG_ADDR 0x13e00000 @@ -40,16 +43,13 @@ #if defined(CONFIG_SH_SH7785LCR_29BIT_PHYSMAPS) #define R8A66597_ADDR 0x14000000 /* USB */ #define CG200_ADDR 0x18000000 /* SD */ -#define PCA9564_ADDR 0x06000000 /* I2C */ #else #define R8A66597_ADDR 0x08000000 #define CG200_ADDR 0x0c000000 -#define PCA9564_ADDR 0x14000000 #endif #define R8A66597_SIZE 0x00000100 #define CG200_SIZE 0x00010000 -#define PCA9564_SIZE 0x00000100 #endif /* __ASM_SH_RENESAS_SH7785LCR_H */ -- cgit v0.10.2 From 53c0054c3f11b49fc09f24e46f58661def952728 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Mon, 11 May 2009 08:45:27 +0000 Subject: sh: include empty_zero_page in text Include empty_zero_page in _text. This fixes a problem introduced by c3e2586b794b12ffcdf69b4e547030b51e18e6d9 which results in broken boot on R2D-Plus. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt diff --git a/arch/sh/kernel/vmlinux.lds.S b/arch/sh/kernel/vmlinux.lds.S index d737230..f53c76a 100644 --- a/arch/sh/kernel/vmlinux.lds.S +++ b/arch/sh/kernel/vmlinux.lds.S @@ -26,12 +26,13 @@ SECTIONS . = CONFIG_PAGE_OFFSET + CONFIG_MEMORY_START + CONFIG_ZERO_PAGE_OFFSET; #endif + _text = .; /* Text and read-only data */ + .empty_zero_page : AT(ADDR(.empty_zero_page) - LOAD_OFFSET) { *(.empty_zero_page) } = 0 .text : AT(ADDR(.text) - LOAD_OFFSET) { - _text = .; /* Text and read-only data */ HEAD_TEXT TEXT_TEXT -- cgit v0.10.2 From 03f408f1aad8d0f5eb6380732bffc0f72b250fa7 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Mon, 11 May 2009 08:54:54 +0000 Subject: sh: TMU platform data for sh775x This patch adds TMU platform data for sh775x. Both clockevent and clocksource support is enabled. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt diff --git a/arch/sh/kernel/cpu/sh4/setup-sh7750.c b/arch/sh/kernel/cpu/sh4/setup-sh7750.c index a1c80d9..09da0c1 100644 --- a/arch/sh/kernel/cpu/sh4/setup-sh7750.c +++ b/arch/sh/kernel/cpu/sh4/setup-sh7750.c @@ -12,6 +12,7 @@ #include #include #include +#include #include static struct resource rtc_resources[] = { @@ -60,9 +61,177 @@ static struct platform_device sci_device = { }, }; +static struct sh_timer_config tmu0_platform_data = { + .name = "TMU0", + .channel_offset = 0x04, + .timer_bit = 0, + .clk = "module_clk", + .clockevent_rating = 200, +}; + +static struct resource tmu0_resources[] = { + [0] = { + .name = "TMU0", + .start = 0xffd80008, + .end = 0xffd80013, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 16, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device tmu0_device = { + .name = "sh_tmu", + .id = 0, + .dev = { + .platform_data = &tmu0_platform_data, + }, + .resource = tmu0_resources, + .num_resources = ARRAY_SIZE(tmu0_resources), +}; + +static struct sh_timer_config tmu1_platform_data = { + .name = "TMU1", + .channel_offset = 0x10, + .timer_bit = 1, + .clk = "module_clk", + .clocksource_rating = 200, +}; + +static struct resource tmu1_resources[] = { + [0] = { + .name = "TMU1", + .start = 0xffd80014, + .end = 0xffd8001f, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 17, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device tmu1_device = { + .name = "sh_tmu", + .id = 1, + .dev = { + .platform_data = &tmu1_platform_data, + }, + .resource = tmu1_resources, + .num_resources = ARRAY_SIZE(tmu1_resources), +}; + +static struct sh_timer_config tmu2_platform_data = { + .name = "TMU2", + .channel_offset = 0x1c, + .timer_bit = 2, + .clk = "module_clk", +}; + +static struct resource tmu2_resources[] = { + [0] = { + .name = "TMU2", + .start = 0xffd80020, + .end = 0xffd8002f, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 18, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device tmu2_device = { + .name = "sh_tmu", + .id = 2, + .dev = { + .platform_data = &tmu2_platform_data, + }, + .resource = tmu2_resources, + .num_resources = ARRAY_SIZE(tmu2_resources), +}; + +/* SH7750R, SH7751 and SH7751R all have two extra timer channels */ +#if defined(CONFIG_CPU_SUBTYPE_SH7750R) || \ + defined(CONFIG_CPU_SUBTYPE_SH7751) || \ + defined(CONFIG_CPU_SUBTYPE_SH7751R) + +static struct sh_timer_config tmu3_platform_data = { + .name = "TMU3", + .channel_offset = 0x04, + .timer_bit = 0, + .clk = "module_clk", +}; + +static struct resource tmu3_resources[] = { + [0] = { + .name = "TMU3", + .start = 0xfe100008, + .end = 0xfe100013, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 72, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device tmu3_device = { + .name = "sh_tmu", + .id = 3, + .dev = { + .platform_data = &tmu3_platform_data, + }, + .resource = tmu3_resources, + .num_resources = ARRAY_SIZE(tmu3_resources), +}; + +static struct sh_timer_config tmu4_platform_data = { + .name = "TMU4", + .channel_offset = 0x10, + .timer_bit = 1, + .clk = "module_clk", +}; + +static struct resource tmu4_resources[] = { + [0] = { + .name = "TMU4", + .start = 0xfe100014, + .end = 0xfe10001f, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 76, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device tmu4_device = { + .name = "sh_tmu", + .id = 4, + .dev = { + .platform_data = &tmu4_platform_data, + }, + .resource = tmu4_resources, + .num_resources = ARRAY_SIZE(tmu4_resources), +}; + +#endif + static struct platform_device *sh7750_devices[] __initdata = { &rtc_device, &sci_device, + &tmu0_device, + &tmu1_device, + &tmu2_device, +#if defined(CONFIG_CPU_SUBTYPE_SH7750R) || \ + defined(CONFIG_CPU_SUBTYPE_SH7751) || \ + defined(CONFIG_CPU_SUBTYPE_SH7751R) + &tmu3_device, + &tmu4_device, +#endif }; static int __init sh7750_devices_setup(void) @@ -72,6 +241,24 @@ static int __init sh7750_devices_setup(void) } __initcall(sh7750_devices_setup); +static struct platform_device *sh7750_early_devices[] __initdata = { + &tmu0_device, + &tmu1_device, + &tmu2_device, +#if defined(CONFIG_CPU_SUBTYPE_SH7750R) || \ + defined(CONFIG_CPU_SUBTYPE_SH7751) || \ + defined(CONFIG_CPU_SUBTYPE_SH7751R) + &tmu3_device, + &tmu4_device, +#endif +}; + +void __init plat_early_device_setup(void) +{ + early_platform_add_devices(sh7750_early_devices, + ARRAY_SIZE(sh7750_early_devices)); +} + enum { UNUSED = 0, -- cgit v0.10.2 From c42f32dca3855d8f867387ec6993d9b62516a00e Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Mon, 11 May 2009 09:06:24 +0000 Subject: sh: TMU platform data for sh7760 This patch adds TMU platform data for sh7760. Both clockevent and clocksource support is enabled. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt diff --git a/arch/sh/kernel/cpu/sh4/setup-sh7760.c b/arch/sh/kernel/cpu/sh4/setup-sh7760.c index d9bdc93..4a6fd0d 100644 --- a/arch/sh/kernel/cpu/sh4/setup-sh7760.c +++ b/arch/sh/kernel/cpu/sh4/setup-sh7760.c @@ -10,6 +10,7 @@ #include #include #include +#include #include #include @@ -168,8 +169,104 @@ static struct platform_device sci_device = { }, }; +static struct sh_timer_config tmu0_platform_data = { + .name = "TMU0", + .channel_offset = 0x04, + .timer_bit = 0, + .clk = "module_clk", + .clockevent_rating = 200, +}; + +static struct resource tmu0_resources[] = { + [0] = { + .name = "TMU0", + .start = 0xffd80008, + .end = 0xffd80013, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 16, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device tmu0_device = { + .name = "sh_tmu", + .id = 0, + .dev = { + .platform_data = &tmu0_platform_data, + }, + .resource = tmu0_resources, + .num_resources = ARRAY_SIZE(tmu0_resources), +}; + +static struct sh_timer_config tmu1_platform_data = { + .name = "TMU1", + .channel_offset = 0x10, + .timer_bit = 1, + .clk = "module_clk", + .clocksource_rating = 200, +}; + +static struct resource tmu1_resources[] = { + [0] = { + .name = "TMU1", + .start = 0xffd80014, + .end = 0xffd8001f, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 17, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device tmu1_device = { + .name = "sh_tmu", + .id = 1, + .dev = { + .platform_data = &tmu1_platform_data, + }, + .resource = tmu1_resources, + .num_resources = ARRAY_SIZE(tmu1_resources), +}; + +static struct sh_timer_config tmu2_platform_data = { + .name = "TMU2", + .channel_offset = 0x1c, + .timer_bit = 2, + .clk = "module_clk", +}; + +static struct resource tmu2_resources[] = { + [0] = { + .name = "TMU2", + .start = 0xffd80020, + .end = 0xffd8002f, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 18, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device tmu2_device = { + .name = "sh_tmu", + .id = 2, + .dev = { + .platform_data = &tmu2_platform_data, + }, + .resource = tmu2_resources, + .num_resources = ARRAY_SIZE(tmu2_resources), +}; + + static struct platform_device *sh7760_devices[] __initdata = { &sci_device, + &tmu0_device, + &tmu1_device, + &tmu2_device, }; static int __init sh7760_devices_setup(void) @@ -179,6 +276,18 @@ static int __init sh7760_devices_setup(void) } __initcall(sh7760_devices_setup); +static struct platform_device *sh7760_early_devices[] __initdata = { + &tmu0_device, + &tmu1_device, + &tmu2_device, +}; + +void __init plat_early_device_setup(void) +{ + early_platform_add_devices(sh7760_early_devices, + ARRAY_SIZE(sh7760_early_devices)); +} + #define INTC_ICR 0xffd00000UL #define INTC_ICR_IRLM (1 << 7) -- cgit v0.10.2 From 3d6ad460214cc72b93333f51f498441a56d622e9 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Mon, 11 May 2009 09:01:08 +0000 Subject: sh: multiple vectors per irq - sh7760 Update intc tables and platform data to use one linux irq per maskable interrupt source instead of keeping the one-to-one mapping between vectors and linux irqs. This fixes potential irq masking issues for sh7760 hardware blocks such as DMAC/TMU2/REF. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt diff --git a/arch/sh/drivers/dma/Kconfig b/arch/sh/drivers/dma/Kconfig index 666713a..63e9dd3 100644 --- a/arch/sh/drivers/dma/Kconfig +++ b/arch/sh/drivers/dma/Kconfig @@ -16,7 +16,8 @@ config SH_DMA_IRQ_MULTI CPU_SUBTYPE_SH7750S || CPU_SUBTYPE_SH7750R || \ CPU_SUBTYPE_SH7751R || CPU_SUBTYPE_SH7091 || \ CPU_SUBTYPE_SH7763 || CPU_SUBTYPE_SH7764 || \ - CPU_SUBTYPE_SH7780 || CPU_SUBTYPE_SH7785 + CPU_SUBTYPE_SH7780 || CPU_SUBTYPE_SH7785 || \ + CPU_SUBTYPE_SH7760 config NR_ONCHIP_DMA_CHANNELS int diff --git a/arch/sh/kernel/cpu/sh4/setup-sh7760.c b/arch/sh/kernel/cpu/sh4/setup-sh7760.c index 4a6fd0d..cd09733 100644 --- a/arch/sh/kernel/cpu/sh4/setup-sh7760.c +++ b/arch/sh/kernel/cpu/sh4/setup-sh7760.c @@ -19,10 +19,7 @@ enum { /* interrupt sources */ IRL0, IRL1, IRL2, IRL3, - HUDI, GPIOI, - DMAC_DMTE0, DMAC_DMTE1, DMAC_DMTE2, DMAC_DMTE3, - DMAC_DMTE4, DMAC_DMTE5, DMAC_DMTE6, DMAC_DMTE7, - DMAC_DMAE, + HUDI, GPIOI, DMAC, IRQ4, IRQ5, IRQ6, IRQ7, HCAN20, HCAN21, SSI0, SSI1, @@ -37,21 +34,20 @@ enum { HSPI, MMCIF0, MMCIF1, MMCIF2, MMCIF3, MFI, ADC, CMT, - TMU0, TMU1, TMU2_TUNI, TMU2_TICPI, - WDT, - REF_RCMI, REF_ROVI, + TMU0, TMU1, TMU2, + WDT, REF, /* interrupt groups */ - DMAC, DMABRG, SCIF0, SCIF1, SCIF2, SIM, MMCIF, TMU2, REF, + DMABRG, SCIF0, SCIF1, SCIF2, SIM, MMCIF, }; static struct intc_vect vectors[] __initdata = { INTC_VECT(HUDI, 0x600), INTC_VECT(GPIOI, 0x620), - INTC_VECT(DMAC_DMTE0, 0x640), INTC_VECT(DMAC_DMTE1, 0x660), - INTC_VECT(DMAC_DMTE2, 0x680), INTC_VECT(DMAC_DMTE3, 0x6a0), - INTC_VECT(DMAC_DMTE4, 0x780), INTC_VECT(DMAC_DMTE5, 0x7a0), - INTC_VECT(DMAC_DMTE6, 0x7c0), INTC_VECT(DMAC_DMTE7, 0x7e0), - INTC_VECT(DMAC_DMAE, 0x6c0), + INTC_VECT(DMAC, 0x640), INTC_VECT(DMAC, 0x660), + INTC_VECT(DMAC, 0x680), INTC_VECT(DMAC, 0x6a0), + INTC_VECT(DMAC, 0x780), INTC_VECT(DMAC, 0x7a0), + INTC_VECT(DMAC, 0x7c0), INTC_VECT(DMAC, 0x7e0), + INTC_VECT(DMAC, 0x6c0), INTC_VECT(IRQ4, 0x800), INTC_VECT(IRQ5, 0x820), INTC_VECT(IRQ6, 0x840), INTC_VECT(IRQ6, 0x860), INTC_VECT(HCAN20, 0x900), INTC_VECT(HCAN21, 0x920), @@ -75,23 +71,18 @@ static struct intc_vect vectors[] __initdata = { INTC_VECT(MFI, 0xe80), /* 0xf80 according to data sheet */ INTC_VECT(ADC, 0xf80), INTC_VECT(CMT, 0xfa0), INTC_VECT(TMU0, 0x400), INTC_VECT(TMU1, 0x420), - INTC_VECT(TMU2_TUNI, 0x440), INTC_VECT(TMU2_TICPI, 0x460), + INTC_VECT(TMU2, 0x440), INTC_VECT(TMU2, 0x460), INTC_VECT(WDT, 0x560), - INTC_VECT(REF_RCMI, 0x580), INTC_VECT(REF_ROVI, 0x5a0), + INTC_VECT(REF, 0x580), INTC_VECT(REF, 0x5a0), }; static struct intc_group groups[] __initdata = { - INTC_GROUP(DMAC, DMAC_DMTE0, DMAC_DMTE1, DMAC_DMTE2, - DMAC_DMTE3, DMAC_DMTE4, DMAC_DMTE5, - DMAC_DMTE6, DMAC_DMTE7, DMAC_DMAE), INTC_GROUP(DMABRG, DMABRG0, DMABRG1, DMABRG2), INTC_GROUP(SCIF0, SCIF0_ERI, SCIF0_RXI, SCIF0_BRI, SCIF0_TXI), INTC_GROUP(SCIF1, SCIF1_ERI, SCIF1_RXI, SCIF1_BRI, SCIF1_TXI), INTC_GROUP(SCIF2, SCIF2_ERI, SCIF2_RXI, SCIF2_BRI, SCIF2_TXI), INTC_GROUP(SIM, SIM_ERI, SIM_RXI, SIM_TXI, SIM_TEI), INTC_GROUP(MMCIF, MMCIF0, MMCIF1, MMCIF2, MMCIF3), - INTC_GROUP(TMU2, TMU2_TUNI, TMU2_TICPI), - INTC_GROUP(REF, REF_RCMI, REF_ROVI), }; static struct intc_mask_reg mask_registers[] __initdata = { -- cgit v0.10.2 From 50e2d0d3b4ffc945a6c27f16d4e5e557e725ec67 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Mon, 11 May 2009 11:34:16 +0000 Subject: sh: r7780 highlander clock fixes Update the r7780 highlander defconfig to fix PCLK value, while at it fix cmdline on r7785. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt diff --git a/arch/sh/configs/r7780mp_defconfig b/arch/sh/configs/r7780mp_defconfig index 68e5eff..943da63 100644 --- a/arch/sh/configs/r7780mp_defconfig +++ b/arch/sh/configs/r7780mp_defconfig @@ -260,7 +260,7 @@ CONFIG_SH_R7780MP=y # CONFIG_SH_TMU=y CONFIG_SH_TIMER_IRQ=28 -CONFIG_SH_PCLK_FREQ=32000000 +CONFIG_SH_PCLK_FREQ=33333333 # CONFIG_NO_HZ is not set # CONFIG_HIGH_RES_TIMERS is not set CONFIG_GENERIC_CLOCKEVENTS_BUILD=y diff --git a/arch/sh/configs/r7785rp_defconfig b/arch/sh/configs/r7785rp_defconfig index 5e677a8..82658f6 100644 --- a/arch/sh/configs/r7785rp_defconfig +++ b/arch/sh/configs/r7785rp_defconfig @@ -333,7 +333,7 @@ CONFIG_GUSA=y CONFIG_ZERO_PAGE_OFFSET=0x00001000 CONFIG_BOOT_LINK_OFFSET=0x00800000 CONFIG_CMDLINE_BOOL=y -CONFIG_CMDLINE="console=ttySC0,115200 root=/dev/sda1 mode4_pin=high" +CONFIG_CMDLINE="console=ttySC0,115200 root=/dev/sda1" # # Bus options -- cgit v0.10.2 From ccc195655fb25d7d967b278c4a4725dc5e7a6bf4 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Mon, 11 May 2009 11:37:16 +0000 Subject: sh: TMU platform data for sh7780 This patch adds TMU platform data for sh7780. Both clockevent and clocksource support is enabled. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7780.c b/arch/sh/kernel/cpu/sh4a/setup-sh7780.c index 6f7227c..f1df020 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7780.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7780.c @@ -12,6 +12,189 @@ #include #include #include +#include + +static struct sh_timer_config tmu0_platform_data = { + .name = "TMU0", + .channel_offset = 0x04, + .timer_bit = 0, + .clk = "module_clk", + .clockevent_rating = 200, +}; + +static struct resource tmu0_resources[] = { + [0] = { + .name = "TMU0", + .start = 0xffd80008, + .end = 0xffd80013, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 28, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device tmu0_device = { + .name = "sh_tmu", + .id = 0, + .dev = { + .platform_data = &tmu0_platform_data, + }, + .resource = tmu0_resources, + .num_resources = ARRAY_SIZE(tmu0_resources), +}; + +static struct sh_timer_config tmu1_platform_data = { + .name = "TMU1", + .channel_offset = 0x10, + .timer_bit = 1, + .clk = "module_clk", + .clocksource_rating = 200, +}; + +static struct resource tmu1_resources[] = { + [0] = { + .name = "TMU1", + .start = 0xffd80014, + .end = 0xffd8001f, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 29, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device tmu1_device = { + .name = "sh_tmu", + .id = 1, + .dev = { + .platform_data = &tmu1_platform_data, + }, + .resource = tmu1_resources, + .num_resources = ARRAY_SIZE(tmu1_resources), +}; + +static struct sh_timer_config tmu2_platform_data = { + .name = "TMU2", + .channel_offset = 0x1c, + .timer_bit = 2, + .clk = "module_clk", +}; + +static struct resource tmu2_resources[] = { + [0] = { + .name = "TMU2", + .start = 0xffd80020, + .end = 0xffd8002f, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 30, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device tmu2_device = { + .name = "sh_tmu", + .id = 2, + .dev = { + .platform_data = &tmu2_platform_data, + }, + .resource = tmu2_resources, + .num_resources = ARRAY_SIZE(tmu2_resources), +}; + +static struct sh_timer_config tmu3_platform_data = { + .name = "TMU3", + .channel_offset = 0x04, + .timer_bit = 0, + .clk = "module_clk", +}; + +static struct resource tmu3_resources[] = { + [0] = { + .name = "TMU3", + .start = 0xffdc0008, + .end = 0xffdc0013, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 96, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device tmu3_device = { + .name = "sh_tmu", + .id = 3, + .dev = { + .platform_data = &tmu3_platform_data, + }, + .resource = tmu3_resources, + .num_resources = ARRAY_SIZE(tmu3_resources), +}; + +static struct sh_timer_config tmu4_platform_data = { + .name = "TMU4", + .channel_offset = 0x10, + .timer_bit = 1, + .clk = "module_clk", +}; + +static struct resource tmu4_resources[] = { + [0] = { + .name = "TMU4", + .start = 0xffdc0014, + .end = 0xffdc001f, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 97, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device tmu4_device = { + .name = "sh_tmu", + .id = 4, + .dev = { + .platform_data = &tmu4_platform_data, + }, + .resource = tmu4_resources, + .num_resources = ARRAY_SIZE(tmu4_resources), +}; + +static struct sh_timer_config tmu5_platform_data = { + .name = "TMU5", + .channel_offset = 0x1c, + .timer_bit = 2, + .clk = "module_clk", +}; + +static struct resource tmu5_resources[] = { + [0] = { + .name = "TMU5", + .start = 0xffdc0020, + .end = 0xffdc002b, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 98, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device tmu5_device = { + .name = "sh_tmu", + .id = 5, + .dev = { + .platform_data = &tmu5_platform_data, + }, + .resource = tmu5_resources, + .num_resources = ARRAY_SIZE(tmu5_resources), +}; static struct resource rtc_resources[] = { [0] = { @@ -58,6 +241,12 @@ static struct platform_device sci_device = { }; static struct platform_device *sh7780_devices[] __initdata = { + &tmu0_device, + &tmu1_device, + &tmu2_device, + &tmu3_device, + &tmu4_device, + &tmu5_device, &rtc_device, &sci_device, }; @@ -69,6 +258,21 @@ static int __init sh7780_devices_setup(void) } __initcall(sh7780_devices_setup); +static struct platform_device *sh7780_early_devices[] __initdata = { + &tmu0_device, + &tmu1_device, + &tmu2_device, + &tmu3_device, + &tmu4_device, + &tmu5_device, +}; + +void __init plat_early_device_setup(void) +{ + early_platform_add_devices(sh7780_early_devices, + ARRAY_SIZE(sh7780_early_devices)); +} + enum { UNUSED = 0, -- cgit v0.10.2 From 0ee8b4d7c7d39d9a9913e27686ef786642c3ccbb Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Tue, 12 May 2009 09:13:59 +0000 Subject: sh: TMU platform data for sh7763 This patch adds TMU platform data for sh7763. Both clockevent and clocksource support is enabled. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7763.c b/arch/sh/kernel/cpu/sh4a/setup-sh7763.c index bdf0f61..c91f34c 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7763.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7763.c @@ -12,6 +12,7 @@ #include #include #include +#include #include #include @@ -113,7 +114,195 @@ static struct platform_device usbf_device = { .resource = usbf_resources, }; +static struct sh_timer_config tmu0_platform_data = { + .name = "TMU0", + .channel_offset = 0x04, + .timer_bit = 0, + .clk = "module_clk", + .clockevent_rating = 200, +}; + +static struct resource tmu0_resources[] = { + [0] = { + .name = "TMU0", + .start = 0xffd80008, + .end = 0xffd80013, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 28, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device tmu0_device = { + .name = "sh_tmu", + .id = 0, + .dev = { + .platform_data = &tmu0_platform_data, + }, + .resource = tmu0_resources, + .num_resources = ARRAY_SIZE(tmu0_resources), +}; + +static struct sh_timer_config tmu1_platform_data = { + .name = "TMU1", + .channel_offset = 0x10, + .timer_bit = 1, + .clk = "module_clk", + .clocksource_rating = 200, +}; + +static struct resource tmu1_resources[] = { + [0] = { + .name = "TMU1", + .start = 0xffd80014, + .end = 0xffd8001f, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 29, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device tmu1_device = { + .name = "sh_tmu", + .id = 1, + .dev = { + .platform_data = &tmu1_platform_data, + }, + .resource = tmu1_resources, + .num_resources = ARRAY_SIZE(tmu1_resources), +}; + +static struct sh_timer_config tmu2_platform_data = { + .name = "TMU2", + .channel_offset = 0x1c, + .timer_bit = 2, + .clk = "module_clk", +}; + +static struct resource tmu2_resources[] = { + [0] = { + .name = "TMU2", + .start = 0xffd80020, + .end = 0xffd8002f, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 30, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device tmu2_device = { + .name = "sh_tmu", + .id = 2, + .dev = { + .platform_data = &tmu2_platform_data, + }, + .resource = tmu2_resources, + .num_resources = ARRAY_SIZE(tmu2_resources), +}; + +static struct sh_timer_config tmu3_platform_data = { + .name = "TMU3", + .channel_offset = 0x04, + .timer_bit = 0, + .clk = "module_clk", +}; + +static struct resource tmu3_resources[] = { + [0] = { + .name = "TMU3", + .start = 0xffd88008, + .end = 0xffd88013, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 96, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device tmu3_device = { + .name = "sh_tmu", + .id = 3, + .dev = { + .platform_data = &tmu3_platform_data, + }, + .resource = tmu3_resources, + .num_resources = ARRAY_SIZE(tmu3_resources), +}; + +static struct sh_timer_config tmu4_platform_data = { + .name = "TMU4", + .channel_offset = 0x10, + .timer_bit = 1, + .clk = "module_clk", +}; + +static struct resource tmu4_resources[] = { + [0] = { + .name = "TMU4", + .start = 0xffd88014, + .end = 0xffd8801f, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 97, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device tmu4_device = { + .name = "sh_tmu", + .id = 4, + .dev = { + .platform_data = &tmu4_platform_data, + }, + .resource = tmu4_resources, + .num_resources = ARRAY_SIZE(tmu4_resources), +}; + +static struct sh_timer_config tmu5_platform_data = { + .name = "TMU5", + .channel_offset = 0x1c, + .timer_bit = 2, + .clk = "module_clk", +}; + +static struct resource tmu5_resources[] = { + [0] = { + .name = "TMU5", + .start = 0xffd88020, + .end = 0xffd8802b, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 98, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device tmu5_device = { + .name = "sh_tmu", + .id = 5, + .dev = { + .platform_data = &tmu5_platform_data, + }, + .resource = tmu5_resources, + .num_resources = ARRAY_SIZE(tmu5_resources), +}; + static struct platform_device *sh7763_devices[] __initdata = { + &tmu0_device, + &tmu1_device, + &tmu2_device, + &tmu3_device, + &tmu4_device, + &tmu5_device, &rtc_device, &sci_device, &usb_ohci_device, @@ -127,6 +316,21 @@ static int __init sh7763_devices_setup(void) } __initcall(sh7763_devices_setup); +static struct platform_device *sh7763_early_devices[] __initdata = { + &tmu0_device, + &tmu1_device, + &tmu2_device, + &tmu3_device, + &tmu4_device, + &tmu5_device, +}; + +void __init plat_early_device_setup(void) +{ + early_platform_add_devices(sh7763_early_devices, + ARRAY_SIZE(sh7763_early_devices)); +} + enum { UNUSED = 0, -- cgit v0.10.2 From 5d8728a71f416fd38a0945271c71cb2933fc5734 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Tue, 12 May 2009 09:18:13 +0000 Subject: sh: add sh7770_generic_defconfig This patch adds a generic sh7770 defconfig file. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt diff --git a/arch/sh/configs/sh7770_generic_defconfig b/arch/sh/configs/sh7770_generic_defconfig new file mode 100644 index 0000000..d6489b4 --- /dev/null +++ b/arch/sh/configs/sh7770_generic_defconfig @@ -0,0 +1,700 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.30-rc4 +# Tue May 12 14:48:21 2009 +# +CONFIG_SUPERH=y +CONFIG_SUPERH32=y +# CONFIG_SUPERH64 is not set +CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig" +CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_BUG=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y +CONFIG_GENERIC_IRQ_PROBE=y +# CONFIG_GENERIC_GPIO is not set +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +# CONFIG_ARCH_SUSPEND_POSSIBLE is not set +CONFIG_ARCH_HIBERNATION_POSSIBLE=y +CONFIG_SYS_SUPPORTS_TMU=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_ARCH_NO_VIRT_TO_BUS=y +CONFIG_ARCH_HAS_DEFAULT_IDLE=y +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +# CONFIG_LOCALVERSION_AUTO is not set +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +# CONFIG_BSD_PROCESS_ACCT is not set + +# +# RCU Subsystem +# +# CONFIG_CLASSIC_RCU is not set +CONFIG_TREE_RCU=y +# CONFIG_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=17 +CONFIG_GROUP_SCHED=y +CONFIG_FAIR_GROUP_SCHED=y +CONFIG_RT_GROUP_SCHED=y +CONFIG_USER_SCHED=y +# CONFIG_CGROUP_SCHED is not set +CONFIG_CGROUPS=y +# CONFIG_CGROUP_DEBUG is not set +# CONFIG_CGROUP_NS is not set +# CONFIG_CGROUP_FREEZER is not set +# CONFIG_CGROUP_DEVICE is not set +# CONFIG_CPUSETS is not set +# CONFIG_CGROUP_CPUACCT is not set +# CONFIG_RESOURCE_COUNTERS is not set +# CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set +# CONFIG_BLK_DEV_INITRD is not set +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y +CONFIG_EMBEDDED=y +# CONFIG_UID16 is not set +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_STRIP_ASM_SYMS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_AIO=y +CONFIG_VM_EVENT_COUNTERS=y +# CONFIG_COMPAT_BRK is not set +# CONFIG_SLAB is not set +CONFIG_SLUB=y +# CONFIG_SLOB is not set +CONFIG_PROFILING=y +CONFIG_TRACEPOINTS=y +# CONFIG_MARKERS is not set +CONFIG_OPROFILE=y +CONFIG_HAVE_OPROFILE=y +CONFIG_HAVE_IOREMAP_PROT=y +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_CLK=y +CONFIG_HAVE_DMA_API_DEBUG=y +# CONFIG_SLOW_WORK is not set +CONFIG_HAVE_GENERIC_DMA_COHERENT=y +CONFIG_RT_MUTEXES=y +CONFIG_BASE_SMALL=0 +# CONFIG_MODULES is not set +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_FREEZER=y + +# +# System type +# +CONFIG_CPU_SH4=y +CONFIG_CPU_SH4A=y +# CONFIG_CPU_SUBTYPE_SH7619 is not set +# CONFIG_CPU_SUBTYPE_SH7201 is not set +# CONFIG_CPU_SUBTYPE_SH7203 is not set +# CONFIG_CPU_SUBTYPE_SH7206 is not set +# CONFIG_CPU_SUBTYPE_SH7263 is not set +# CONFIG_CPU_SUBTYPE_MXG is not set +# CONFIG_CPU_SUBTYPE_SH7705 is not set +# CONFIG_CPU_SUBTYPE_SH7706 is not set +# CONFIG_CPU_SUBTYPE_SH7707 is not set +# CONFIG_CPU_SUBTYPE_SH7708 is not set +# CONFIG_CPU_SUBTYPE_SH7709 is not set +# CONFIG_CPU_SUBTYPE_SH7710 is not set +# CONFIG_CPU_SUBTYPE_SH7712 is not set +# CONFIG_CPU_SUBTYPE_SH7720 is not set +# CONFIG_CPU_SUBTYPE_SH7721 is not set +# CONFIG_CPU_SUBTYPE_SH7750 is not set +# CONFIG_CPU_SUBTYPE_SH7091 is not set +# CONFIG_CPU_SUBTYPE_SH7750R is not set +# CONFIG_CPU_SUBTYPE_SH7750S is not set +# CONFIG_CPU_SUBTYPE_SH7751 is not set +# CONFIG_CPU_SUBTYPE_SH7751R is not set +# CONFIG_CPU_SUBTYPE_SH7760 is not set +# CONFIG_CPU_SUBTYPE_SH4_202 is not set +# CONFIG_CPU_SUBTYPE_SH7723 is not set +# CONFIG_CPU_SUBTYPE_SH7724 is not set +# CONFIG_CPU_SUBTYPE_SH7763 is not set +CONFIG_CPU_SUBTYPE_SH7770=y +# CONFIG_CPU_SUBTYPE_SH7780 is not set +# CONFIG_CPU_SUBTYPE_SH7785 is not set +# CONFIG_CPU_SUBTYPE_SH7786 is not set +# CONFIG_CPU_SUBTYPE_SHX3 is not set +# CONFIG_CPU_SUBTYPE_SH7343 is not set +# CONFIG_CPU_SUBTYPE_SH7722 is not set +# CONFIG_CPU_SUBTYPE_SH7366 is not set + +# +# Memory management options +# +CONFIG_QUICKLIST=y +CONFIG_MMU=y +CONFIG_PAGE_OFFSET=0x80000000 +CONFIG_MEMORY_START=0x08000000 +CONFIG_MEMORY_SIZE=0x04000000 +CONFIG_29BIT=y +CONFIG_VSYSCALL=y +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_SPARSEMEM_ENABLE=y +CONFIG_ARCH_SPARSEMEM_DEFAULT=y +CONFIG_MAX_ACTIVE_REGIONS=1 +CONFIG_ARCH_POPULATES_NODE_MAP=y +CONFIG_ARCH_SELECT_MEMORY_MODEL=y +CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y +CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y +CONFIG_PAGE_SIZE_4KB=y +# CONFIG_PAGE_SIZE_8KB is not set +# CONFIG_PAGE_SIZE_16KB is not set +# CONFIG_PAGE_SIZE_64KB is not set +CONFIG_SELECT_MEMORY_MODEL=y +# CONFIG_FLATMEM_MANUAL is not set +# CONFIG_DISCONTIGMEM_MANUAL is not set +CONFIG_SPARSEMEM_MANUAL=y +CONFIG_SPARSEMEM=y +CONFIG_HAVE_MEMORY_PRESENT=y +CONFIG_SPARSEMEM_STATIC=y + +# +# Memory hotplug is currently incompatible with Software Suspend +# +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_MIGRATION=y +# CONFIG_PHYS_ADDR_T_64BIT is not set +CONFIG_ZONE_DMA_FLAG=0 +CONFIG_NR_QUICK=2 +CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y + +# +# Cache configuration +# +CONFIG_CACHE_WRITEBACK=y +# CONFIG_CACHE_WRITETHROUGH is not set +# CONFIG_CACHE_OFF is not set + +# +# Processor features +# +CONFIG_CPU_LITTLE_ENDIAN=y +# CONFIG_CPU_BIG_ENDIAN is not set +CONFIG_SH_FPU=y +# CONFIG_SH_STORE_QUEUES is not set +CONFIG_CPU_HAS_INTEVT=y +CONFIG_CPU_HAS_SR_RB=y +CONFIG_CPU_HAS_FPU=y + +# +# Board support +# + +# +# Timer and clock configuration +# +CONFIG_SH_TMU=y +CONFIG_SH_TIMER_IRQ=16 +CONFIG_SH_PCLK_FREQ=41666666 +CONFIG_TICK_ONESHOT=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y + +# +# CPU Frequency scaling +# +CONFIG_CPU_FREQ=y +CONFIG_CPU_FREQ_TABLE=y +# CONFIG_CPU_FREQ_DEBUG is not set +CONFIG_CPU_FREQ_STAT=y +# CONFIG_CPU_FREQ_STAT_DETAILS is not set +CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y +# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set +CONFIG_CPU_FREQ_GOV_PERFORMANCE=y +# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set +# CONFIG_CPU_FREQ_GOV_USERSPACE is not set +# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set +# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set +CONFIG_SH_CPU_FREQ=y + +# +# DMA support +# +# CONFIG_SH_DMA is not set + +# +# Companion Chips +# + +# +# Additional SuperH Device Drivers +# +# CONFIG_HEARTBEAT is not set +# CONFIG_PUSH_SWITCH is not set + +# +# Kernel features +# +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_300 is not set +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 +CONFIG_SCHED_HRTICK=y +CONFIG_KEXEC=y +# CONFIG_CRASH_DUMP is not set +CONFIG_KEXEC_JUMP=y +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set +CONFIG_GUSA=y + +# +# Boot options +# +CONFIG_ZERO_PAGE_OFFSET=0x00001000 +CONFIG_BOOT_LINK_OFFSET=0x00800000 +CONFIG_ENTRY_OFFSET=0x00001000 +# CONFIG_CMDLINE_BOOL is not set + +# +# Bus options +# +# CONFIG_ARCH_SUPPORTS_MSI is not set +# CONFIG_PCCARD is not set + +# +# Executable file formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_HAVE_AOUT is not set +# CONFIG_BINFMT_MISC is not set + +# +# Power management options (EXPERIMENTAL) +# +CONFIG_PM=y +# CONFIG_PM_DEBUG is not set +CONFIG_PM_SLEEP=y +CONFIG_HIBERNATION=y +CONFIG_PM_STD_PARTITION="" +CONFIG_CPU_IDLE=y +CONFIG_CPU_IDLE_GOV_LADDER=y +CONFIG_CPU_IDLE_GOV_MENU=y +# CONFIG_NET is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_STANDALONE=y +# CONFIG_PREVENT_FIRMWARE_BUILD is not set +CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_MTD is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_COW_COMMON is not set +# CONFIG_BLK_DEV_LOOP is not set +# CONFIG_BLK_DEV_RAM is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_BLK_DEV_HD is not set +# CONFIG_MISC_DEVICES is not set +CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +# CONFIG_SCSI is not set +# CONFIG_SCSI_DMA is not set +# CONFIG_SCSI_NETLINK is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set +# CONFIG_PHONE is not set + +# +# Input device support +# +# CONFIG_INPUT is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +# CONFIG_VT is not set +# CONFIG_DEVKMEM is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_SH_SCI=y +CONFIG_SERIAL_SH_SCI_NR_UARTS=6 +CONFIG_SERIAL_SH_SCI_CONSOLE=y +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_UNIX98_PTYS is not set +# CONFIG_LEGACY_PTYS is not set +# CONFIG_IPMI_HANDLER is not set +# CONFIG_HW_RANDOM is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_CHARDEV=y +CONFIG_I2C_HELPER_AUTO=y + +# +# I2C Hardware Bus support +# + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# +# CONFIG_I2C_OCORES is not set +CONFIG_I2C_SH_MOBILE=y +# CONFIG_I2C_SIMTEC is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_TAOS_EVM is not set + +# +# Other I2C/SMBus bus drivers +# +# CONFIG_I2C_PCA_PLATFORM is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_DS1682 is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_PCF8575 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set +# CONFIG_SPI is not set +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set +# CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y + +# +# Sonics Silicon Backplane +# +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_CORE is not set +# CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_TWL4030_CORE is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_PCF50633 is not set +# CONFIG_REGULATOR is not set + +# +# Multimedia devices +# + +# +# Multimedia core support +# +# CONFIG_VIDEO_DEV is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# +# CONFIG_DAB is not set + +# +# Graphics support +# +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +# CONFIG_FB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set +# CONFIG_SOUND is not set +# CONFIG_USB_SUPPORT is not set +# CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set +# CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set + +# +# RTC interfaces +# +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set + +# +# I2C RTC drivers +# +# CONFIG_RTC_DRV_DS1307 is not set +# CONFIG_RTC_DRV_DS1374 is not set +# CONFIG_RTC_DRV_DS1672 is not set +# CONFIG_RTC_DRV_MAX6900 is not set +# CONFIG_RTC_DRV_RS5C372 is not set +# CONFIG_RTC_DRV_ISL1208 is not set +# CONFIG_RTC_DRV_X1205 is not set +# CONFIG_RTC_DRV_PCF8563 is not set +# CONFIG_RTC_DRV_PCF8583 is not set +# CONFIG_RTC_DRV_M41T80 is not set +# CONFIG_RTC_DRV_S35390A is not set +# CONFIG_RTC_DRV_FM3130 is not set +# CONFIG_RTC_DRV_RX8581 is not set + +# +# SPI RTC drivers +# + +# +# Platform RTC drivers +# +# CONFIG_RTC_DRV_DS1286 is not set +# CONFIG_RTC_DRV_DS1511 is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_BQ4802 is not set +# CONFIG_RTC_DRV_V3020 is not set + +# +# on-CPU RTC drivers +# +CONFIG_RTC_DRV_SH=y +# CONFIG_RTC_DRV_GENERIC is not set +# CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set +CONFIG_UIO=y +# CONFIG_UIO_PDRV is not set +CONFIG_UIO_PDRV_GENIRQ=y +# CONFIG_UIO_SMX is not set +# CONFIG_UIO_SERCOS3 is not set +# CONFIG_STAGING is not set + +# +# File systems +# +# CONFIG_EXT2_FS is not set +# CONFIG_EXT3_FS is not set +# CONFIG_EXT4_FS is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y +# CONFIG_XFS_FS is not set +# CONFIG_BTRFS_FS is not set +# CONFIG_DNOTIFY is not set +# CONFIG_INOTIFY is not set +# CONFIG_QUOTA is not set +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# Caches +# +# CONFIG_FSCACHE is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +# CONFIG_PROC_FS is not set +# CONFIG_SYSFS is not set +# CONFIG_TMPFS is not set +# CONFIG_HUGETLBFS is not set +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_MISC_FILESYSTEMS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_NLS is not set + +# +# Kernel hacking +# +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +# CONFIG_PRINTK_TIME is not set +# CONFIG_ENABLE_WARN_DEPRECATED is not set +# CONFIG_ENABLE_MUST_CHECK is not set +CONFIG_FRAME_WARN=1024 +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set +CONFIG_DEBUG_FS=y +# CONFIG_HEADERS_CHECK is not set +# CONFIG_DEBUG_KERNEL is not set +CONFIG_STACKTRACE=y +# CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_LATENCYTOP is not set +# CONFIG_SYSCTL_SYSCALL_CHECK is not set +CONFIG_NOP_TRACER=y +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_RING_BUFFER=y +CONFIG_TRACING=y +CONFIG_TRACING_SUPPORT=y + +# +# Tracers +# +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_FTRACE_STARTUP_TEST is not set +# CONFIG_DYNAMIC_DEBUG is not set +# CONFIG_DMA_API_DEBUG is not set +# CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_SH_STANDARD_BIOS is not set +# CONFIG_EARLY_SCIF_CONSOLE is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITYFS is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +# CONFIG_CRYPTO is not set +CONFIG_BINARY_PRINTF=y + +# +# Library routines +# +CONFIG_GENERIC_FIND_LAST_BIT=y +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set +# CONFIG_CRC_ITU_T is not set +# CONFIG_CRC32 is not set +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y -- cgit v0.10.2 From f251935e02e89aa203e0729bfd727175018cec6f Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Tue, 12 May 2009 09:20:08 +0000 Subject: sh: TMU platform data for sh7770 This patch adds TMU platform data for sh7770. Both clockevent and clocksource support is enabled. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7770.c b/arch/sh/kernel/cpu/sh4a/setup-sh7770.c index b73578e..b61d614 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7770.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7770.c @@ -11,6 +11,7 @@ #include #include #include +#include static struct plat_sci_port sci_platform_data[] = { { @@ -76,7 +77,288 @@ static struct platform_device sci_device = { }, }; +static struct sh_timer_config tmu0_platform_data = { + .name = "TMU0", + .channel_offset = 0x04, + .timer_bit = 0, + .clk = "module_clk", + .clockevent_rating = 200, +}; + +static struct resource tmu0_resources[] = { + [0] = { + .name = "TMU0", + .start = 0xffd80008, + .end = 0xffd80013, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 16, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device tmu0_device = { + .name = "sh_tmu", + .id = 0, + .dev = { + .platform_data = &tmu0_platform_data, + }, + .resource = tmu0_resources, + .num_resources = ARRAY_SIZE(tmu0_resources), +}; + +static struct sh_timer_config tmu1_platform_data = { + .name = "TMU1", + .channel_offset = 0x10, + .timer_bit = 1, + .clk = "module_clk", + .clocksource_rating = 200, +}; + +static struct resource tmu1_resources[] = { + [0] = { + .name = "TMU1", + .start = 0xffd80014, + .end = 0xffd8001f, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 17, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device tmu1_device = { + .name = "sh_tmu", + .id = 1, + .dev = { + .platform_data = &tmu1_platform_data, + }, + .resource = tmu1_resources, + .num_resources = ARRAY_SIZE(tmu1_resources), +}; + +static struct sh_timer_config tmu2_platform_data = { + .name = "TMU2", + .channel_offset = 0x1c, + .timer_bit = 2, + .clk = "module_clk", +}; + +static struct resource tmu2_resources[] = { + [0] = { + .name = "TMU2", + .start = 0xffd80020, + .end = 0xffd8002f, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 18, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device tmu2_device = { + .name = "sh_tmu", + .id = 2, + .dev = { + .platform_data = &tmu2_platform_data, + }, + .resource = tmu2_resources, + .num_resources = ARRAY_SIZE(tmu2_resources), +}; + +static struct sh_timer_config tmu3_platform_data = { + .name = "TMU3", + .channel_offset = 0x04, + .timer_bit = 0, + .clk = "module_clk", +}; + +static struct resource tmu3_resources[] = { + [0] = { + .name = "TMU3", + .start = 0xffd81008, + .end = 0xffd81013, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 19, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device tmu3_device = { + .name = "sh_tmu", + .id = 3, + .dev = { + .platform_data = &tmu3_platform_data, + }, + .resource = tmu3_resources, + .num_resources = ARRAY_SIZE(tmu3_resources), +}; + +static struct sh_timer_config tmu4_platform_data = { + .name = "TMU4", + .channel_offset = 0x10, + .timer_bit = 1, + .clk = "module_clk", +}; + +static struct resource tmu4_resources[] = { + [0] = { + .name = "TMU4", + .start = 0xffd81014, + .end = 0xffd8101f, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 20, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device tmu4_device = { + .name = "sh_tmu", + .id = 4, + .dev = { + .platform_data = &tmu4_platform_data, + }, + .resource = tmu4_resources, + .num_resources = ARRAY_SIZE(tmu4_resources), +}; + +static struct sh_timer_config tmu5_platform_data = { + .name = "TMU5", + .channel_offset = 0x1c, + .timer_bit = 2, + .clk = "module_clk", +}; + +static struct resource tmu5_resources[] = { + [0] = { + .name = "TMU5", + .start = 0xffd81020, + .end = 0xffd8102f, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 21, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device tmu5_device = { + .name = "sh_tmu", + .id = 5, + .dev = { + .platform_data = &tmu5_platform_data, + }, + .resource = tmu5_resources, + .num_resources = ARRAY_SIZE(tmu5_resources), +}; + +static struct sh_timer_config tmu6_platform_data = { + .name = "TMU6", + .channel_offset = 0x04, + .timer_bit = 0, + .clk = "module_clk", +}; + +static struct resource tmu6_resources[] = { + [0] = { + .name = "TMU6", + .start = 0xffd82008, + .end = 0xffd82013, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 22, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device tmu6_device = { + .name = "sh_tmu", + .id = 6, + .dev = { + .platform_data = &tmu6_platform_data, + }, + .resource = tmu6_resources, + .num_resources = ARRAY_SIZE(tmu6_resources), +}; + +static struct sh_timer_config tmu7_platform_data = { + .name = "TMU7", + .channel_offset = 0x10, + .timer_bit = 1, + .clk = "module_clk", +}; + +static struct resource tmu7_resources[] = { + [0] = { + .name = "TMU7", + .start = 0xffd82014, + .end = 0xffd8201f, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 23, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device tmu7_device = { + .name = "sh_tmu", + .id = 7, + .dev = { + .platform_data = &tmu7_platform_data, + }, + .resource = tmu7_resources, + .num_resources = ARRAY_SIZE(tmu7_resources), +}; + +static struct sh_timer_config tmu8_platform_data = { + .name = "TMU8", + .channel_offset = 0x1c, + .timer_bit = 2, + .clk = "module_clk", +}; + +static struct resource tmu8_resources[] = { + [0] = { + .name = "TMU8", + .start = 0xffd82020, + .end = 0xffd8202b, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 24, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device tmu8_device = { + .name = "sh_tmu", + .id = 8, + .dev = { + .platform_data = &tmu8_platform_data, + }, + .resource = tmu8_resources, + .num_resources = ARRAY_SIZE(tmu8_resources), +}; + static struct platform_device *sh7770_devices[] __initdata = { + &tmu0_device, + &tmu1_device, + &tmu2_device, + &tmu3_device, + &tmu4_device, + &tmu5_device, + &tmu6_device, + &tmu7_device, + &tmu8_device, &sci_device, }; @@ -87,6 +369,24 @@ static int __init sh7770_devices_setup(void) } __initcall(sh7770_devices_setup); +static struct platform_device *sh7770_early_devices[] __initdata = { + &tmu0_device, + &tmu1_device, + &tmu2_device, + &tmu3_device, + &tmu4_device, + &tmu5_device, + &tmu6_device, + &tmu7_device, + &tmu8_device, +}; + +void __init plat_early_device_setup(void) +{ + early_platform_add_devices(sh7770_early_devices, + ARRAY_SIZE(sh7770_early_devices)); +} + void __init plat_irq_setup(void) { } -- cgit v0.10.2 From 5f8a29ba39d52b2eaaed907b3cb3016b949a8f9b Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Tue, 12 May 2009 09:28:25 +0000 Subject: sh: TMU platform data for sh4-202 This patch adds TMU platform data for sh4-202. Both clockevent and clocksource support is enabled. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt diff --git a/arch/sh/kernel/cpu/sh4/setup-sh4-202.c b/arch/sh/kernel/cpu/sh4/setup-sh4-202.c index 7371abf..034c069 100644 --- a/arch/sh/kernel/cpu/sh4/setup-sh4-202.c +++ b/arch/sh/kernel/cpu/sh4/setup-sh4-202.c @@ -11,6 +11,7 @@ #include #include #include +#include static struct plat_sci_port sci_platform_data[] = { { @@ -31,8 +32,103 @@ static struct platform_device sci_device = { }, }; +static struct sh_timer_config tmu0_platform_data = { + .name = "TMU0", + .channel_offset = 0x04, + .timer_bit = 0, + .clk = "module_clk", + .clockevent_rating = 200, +}; + +static struct resource tmu0_resources[] = { + [0] = { + .name = "TMU0", + .start = 0xffd80008, + .end = 0xffd80013, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 16, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device tmu0_device = { + .name = "sh_tmu", + .id = 0, + .dev = { + .platform_data = &tmu0_platform_data, + }, + .resource = tmu0_resources, + .num_resources = ARRAY_SIZE(tmu0_resources), +}; + +static struct sh_timer_config tmu1_platform_data = { + .name = "TMU1", + .channel_offset = 0x10, + .timer_bit = 1, + .clk = "module_clk", + .clocksource_rating = 200, +}; + +static struct resource tmu1_resources[] = { + [0] = { + .name = "TMU1", + .start = 0xffd80014, + .end = 0xffd8001f, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 17, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device tmu1_device = { + .name = "sh_tmu", + .id = 1, + .dev = { + .platform_data = &tmu1_platform_data, + }, + .resource = tmu1_resources, + .num_resources = ARRAY_SIZE(tmu1_resources), +}; + +static struct sh_timer_config tmu2_platform_data = { + .name = "TMU2", + .channel_offset = 0x1c, + .timer_bit = 2, + .clk = "module_clk", +}; + +static struct resource tmu2_resources[] = { + [0] = { + .name = "TMU2", + .start = 0xffd80020, + .end = 0xffd8002f, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 18, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device tmu2_device = { + .name = "sh_tmu", + .id = 2, + .dev = { + .platform_data = &tmu2_platform_data, + }, + .resource = tmu2_resources, + .num_resources = ARRAY_SIZE(tmu2_resources), +}; + static struct platform_device *sh4202_devices[] __initdata = { &sci_device, + &tmu0_device, + &tmu1_device, + &tmu2_device, }; static int __init sh4202_devices_setup(void) @@ -42,6 +138,18 @@ static int __init sh4202_devices_setup(void) } __initcall(sh4202_devices_setup); +static struct platform_device *sh4202_early_devices[] __initdata = { + &tmu0_device, + &tmu1_device, + &tmu2_device, +}; + +void __init plat_early_device_setup(void) +{ + early_platform_add_devices(sh4202_early_devices, + ARRAY_SIZE(sh4202_early_devices)); +} + void __init plat_irq_setup(void) { /* do nothing - all IRL interrupts are handled by the board code */ -- cgit v0.10.2 From 67d889bd828a3cbf36ef27bd4a5c5f7ec76e20b9 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Tue, 12 May 2009 09:34:26 +0000 Subject: sh: add sh4-202 INTC tables This patch adds INTC tables for sh4-202 with support for HUDI, TMU0, TMU1, TMU2, RTC, SCIF and WDT. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt diff --git a/arch/sh/kernel/cpu/sh4/setup-sh4-202.c b/arch/sh/kernel/cpu/sh4/setup-sh4-202.c index 034c069..be79fa13 100644 --- a/arch/sh/kernel/cpu/sh4/setup-sh4-202.c +++ b/arch/sh/kernel/cpu/sh4/setup-sh4-202.c @@ -2,6 +2,7 @@ * SH4-202 Setup * * Copyright (C) 2006 Paul Mundt + * Copyright (C) 2009 Magnus Damm * * This file is subject to the terms and conditions of the GNU General Public * License. See the file "COPYING" in the main directory of this archive @@ -12,6 +13,7 @@ #include #include #include +#include static struct plat_sci_port sci_platform_data[] = { { @@ -150,7 +152,59 @@ void __init plat_early_device_setup(void) ARRAY_SIZE(sh4202_early_devices)); } +enum { + UNUSED = 0, + + /* interrupt sources */ + IRL0, IRL1, IRL2, IRL3, /* only IRLM mode supported */ + HUDI, TMU0, TMU1, TMU2, RTC, SCIF, WDT, +}; + +static struct intc_vect vectors[] __initdata = { + INTC_VECT(HUDI, 0x600), + INTC_VECT(TMU0, 0x400), INTC_VECT(TMU1, 0x420), + INTC_VECT(TMU2, 0x440), INTC_VECT(TMU2, 0x460), + INTC_VECT(RTC, 0x480), INTC_VECT(RTC, 0x4a0), + INTC_VECT(RTC, 0x4c0), + INTC_VECT(SCIF, 0x700), INTC_VECT(SCIF, 0x720), + INTC_VECT(SCIF, 0x740), INTC_VECT(SCIF, 0x760), + INTC_VECT(WDT, 0x560), +}; + +static struct intc_prio_reg prio_registers[] __initdata = { + { 0xffd00004, 0, 16, 4, /* IPRA */ { TMU0, TMU1, TMU2, RTC } }, + { 0xffd00008, 0, 16, 4, /* IPRB */ { WDT, 0, 0, 0 } }, + { 0xffd0000c, 0, 16, 4, /* IPRC */ { 0, 0, SCIF, HUDI } }, + { 0xffd00010, 0, 16, 4, /* IPRD */ { IRL0, IRL1, IRL2, IRL3 } }, +}; + +static DECLARE_INTC_DESC(intc_desc, "sh4-202", vectors, NULL, + NULL, prio_registers, NULL); + +static struct intc_vect vectors_irlm[] __initdata = { + INTC_VECT(IRL0, 0x240), INTC_VECT(IRL1, 0x2a0), + INTC_VECT(IRL2, 0x300), INTC_VECT(IRL3, 0x360), +}; + +static DECLARE_INTC_DESC(intc_desc_irlm, "sh4-202_irlm", vectors_irlm, NULL, + NULL, prio_registers, NULL); + void __init plat_irq_setup(void) { - /* do nothing - all IRL interrupts are handled by the board code */ + register_intc_controller(&intc_desc); +} + +#define INTC_ICR 0xffd00000UL +#define INTC_ICR_IRLM (1<<7) + +void __init plat_irq_setup_pins(int mode) +{ + switch (mode) { + case IRQ_MODE_IRQ: /* individual interrupt mode for IRL3-0 */ + ctrl_outw(ctrl_inw(INTC_ICR) | INTC_ICR_IRLM, INTC_ICR); + register_intc_controller(&intc_desc_irlm); + break; + default: + BUG(); + } } -- cgit v0.10.2 From e37677a429a67cb45004b060ea3376e500bc73c4 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Tue, 12 May 2009 09:39:06 +0000 Subject: sh: TMU platform data for sh7343 This patch adds TMU platform data for sh7343. Both clockevent and clocksource support is enabled. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7343.c b/arch/sh/kernel/cpu/sh4a/setup-sh7343.c index b9c361e..51204dc 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7343.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7343.c @@ -173,6 +173,98 @@ static struct platform_device cmt_device = { .num_resources = ARRAY_SIZE(cmt_resources), }; +static struct sh_timer_config tmu0_platform_data = { + .name = "TMU0", + .channel_offset = 0x04, + .timer_bit = 0, + .clk = "tmu0", + .clockevent_rating = 200, +}; + +static struct resource tmu0_resources[] = { + [0] = { + .name = "TMU0", + .start = 0xffd80008, + .end = 0xffd80013, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 16, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device tmu0_device = { + .name = "sh_tmu", + .id = 0, + .dev = { + .platform_data = &tmu0_platform_data, + }, + .resource = tmu0_resources, + .num_resources = ARRAY_SIZE(tmu0_resources), +}; + +static struct sh_timer_config tmu1_platform_data = { + .name = "TMU1", + .channel_offset = 0x10, + .timer_bit = 1, + .clk = "tmu0", + .clocksource_rating = 200, +}; + +static struct resource tmu1_resources[] = { + [0] = { + .name = "TMU1", + .start = 0xffd80014, + .end = 0xffd8001f, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 17, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device tmu1_device = { + .name = "sh_tmu", + .id = 1, + .dev = { + .platform_data = &tmu1_platform_data, + }, + .resource = tmu1_resources, + .num_resources = ARRAY_SIZE(tmu1_resources), +}; + +static struct sh_timer_config tmu2_platform_data = { + .name = "TMU2", + .channel_offset = 0x1c, + .timer_bit = 2, + .clk = "tmu0", +}; + +static struct resource tmu2_resources[] = { + [0] = { + .name = "TMU2", + .start = 0xffd80020, + .end = 0xffd8002b, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 18, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device tmu2_device = { + .name = "sh_tmu", + .id = 2, + .dev = { + .platform_data = &tmu2_platform_data, + }, + .resource = tmu2_resources, + .num_resources = ARRAY_SIZE(tmu2_resources), +}; + static struct plat_sci_port sci_platform_data[] = { { .mapbase = 0xffe00000, @@ -213,6 +305,9 @@ static struct platform_device sci_device = { static struct platform_device *sh7343_devices[] __initdata = { &cmt_device, + &tmu0_device, + &tmu1_device, + &tmu2_device, &iic0_device, &iic1_device, &sci_device, @@ -240,6 +335,9 @@ __initcall(sh7343_devices_setup); static struct platform_device *sh7343_early_devices[] __initdata = { &cmt_device, + &tmu0_device, + &tmu1_device, + &tmu2_device, }; void __init plat_early_device_setup(void) -- cgit v0.10.2 From f2710ebcd0a0404ccca3bbad68fd3639fe87ba6f Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Tue, 12 May 2009 09:48:21 +0000 Subject: sh: TMU platform data for sh7366 This patch adds TMU platform data for sh7366. Both clockevent and clocksource support is enabled. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7366.c b/arch/sh/kernel/cpu/sh4a/setup-sh7366.c index d4a994b..04de0fa 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7366.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7366.c @@ -180,6 +180,98 @@ static struct platform_device cmt_device = { .num_resources = ARRAY_SIZE(cmt_resources), }; +static struct sh_timer_config tmu0_platform_data = { + .name = "TMU0", + .channel_offset = 0x04, + .timer_bit = 0, + .clk = "tmu0", + .clockevent_rating = 200, +}; + +static struct resource tmu0_resources[] = { + [0] = { + .name = "TMU0", + .start = 0xffd80008, + .end = 0xffd80013, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 16, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device tmu0_device = { + .name = "sh_tmu", + .id = 0, + .dev = { + .platform_data = &tmu0_platform_data, + }, + .resource = tmu0_resources, + .num_resources = ARRAY_SIZE(tmu0_resources), +}; + +static struct sh_timer_config tmu1_platform_data = { + .name = "TMU1", + .channel_offset = 0x10, + .timer_bit = 1, + .clk = "tmu0", + .clocksource_rating = 200, +}; + +static struct resource tmu1_resources[] = { + [0] = { + .name = "TMU1", + .start = 0xffd80014, + .end = 0xffd8001f, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 17, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device tmu1_device = { + .name = "sh_tmu", + .id = 1, + .dev = { + .platform_data = &tmu1_platform_data, + }, + .resource = tmu1_resources, + .num_resources = ARRAY_SIZE(tmu1_resources), +}; + +static struct sh_timer_config tmu2_platform_data = { + .name = "TMU2", + .channel_offset = 0x1c, + .timer_bit = 2, + .clk = "tmu0", +}; + +static struct resource tmu2_resources[] = { + [0] = { + .name = "TMU2", + .start = 0xffd80020, + .end = 0xffd8002b, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 18, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device tmu2_device = { + .name = "sh_tmu", + .id = 2, + .dev = { + .platform_data = &tmu2_platform_data, + }, + .resource = tmu2_resources, + .num_resources = ARRAY_SIZE(tmu2_resources), +}; + static struct plat_sci_port sci_platform_data[] = { { .mapbase = 0xffe00000, @@ -202,6 +294,9 @@ static struct platform_device sci_device = { static struct platform_device *sh7366_devices[] __initdata = { &cmt_device, + &tmu0_device, + &tmu1_device, + &tmu2_device, &iic_device, &sci_device, &usb_host_device, @@ -229,6 +324,9 @@ __initcall(sh7366_devices_setup); static struct platform_device *sh7366_early_devices[] __initdata = { &cmt_device, + &tmu0_device, + &tmu1_device, + &tmu2_device, }; void __init plat_early_device_setup(void) -- cgit v0.10.2 From 6a3501b63d30643120566cc1efba5acd0e64b12d Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Tue, 12 May 2009 09:50:46 +0000 Subject: sh: TMU platform data for sh7724 This patch adds TMU platform data for sh7724. Both clockevent and clocksource support is enabled. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7724.c b/arch/sh/kernel/cpu/sh4a/setup-sh7724.c index a3039ce..852f810 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7724.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7724.c @@ -268,8 +268,197 @@ static struct platform_device cmt_device = { .num_resources = ARRAY_SIZE(cmt_resources), }; +static struct sh_timer_config tmu0_platform_data = { + .name = "TMU0", + .channel_offset = 0x04, + .timer_bit = 0, + .clk = "tmu0", + .clockevent_rating = 200, +}; + +static struct resource tmu0_resources[] = { + [0] = { + .name = "TMU0", + .start = 0xffd80008, + .end = 0xffd80013, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 16, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device tmu0_device = { + .name = "sh_tmu", + .id = 0, + .dev = { + .platform_data = &tmu0_platform_data, + }, + .resource = tmu0_resources, + .num_resources = ARRAY_SIZE(tmu0_resources), +}; + +static struct sh_timer_config tmu1_platform_data = { + .name = "TMU1", + .channel_offset = 0x10, + .timer_bit = 1, + .clk = "tmu0", + .clocksource_rating = 200, +}; + +static struct resource tmu1_resources[] = { + [0] = { + .name = "TMU1", + .start = 0xffd80014, + .end = 0xffd8001f, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 17, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device tmu1_device = { + .name = "sh_tmu", + .id = 1, + .dev = { + .platform_data = &tmu1_platform_data, + }, + .resource = tmu1_resources, + .num_resources = ARRAY_SIZE(tmu1_resources), +}; + +static struct sh_timer_config tmu2_platform_data = { + .name = "TMU2", + .channel_offset = 0x1c, + .timer_bit = 2, + .clk = "tmu0", +}; + +static struct resource tmu2_resources[] = { + [0] = { + .name = "TMU2", + .start = 0xffd80020, + .end = 0xffd8002b, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 18, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device tmu2_device = { + .name = "sh_tmu", + .id = 2, + .dev = { + .platform_data = &tmu2_platform_data, + }, + .resource = tmu2_resources, + .num_resources = ARRAY_SIZE(tmu2_resources), +}; + + +static struct sh_timer_config tmu3_platform_data = { + .name = "TMU3", + .channel_offset = 0x04, + .timer_bit = 0, + .clk = "tmu1", +}; + +static struct resource tmu3_resources[] = { + [0] = { + .name = "TMU3", + .start = 0xffd90008, + .end = 0xffd90013, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 57, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device tmu3_device = { + .name = "sh_tmu", + .id = 3, + .dev = { + .platform_data = &tmu3_platform_data, + }, + .resource = tmu3_resources, + .num_resources = ARRAY_SIZE(tmu3_resources), +}; + +static struct sh_timer_config tmu4_platform_data = { + .name = "TMU4", + .channel_offset = 0x10, + .timer_bit = 1, + .clk = "tmu1", +}; + +static struct resource tmu4_resources[] = { + [0] = { + .name = "TMU4", + .start = 0xffd90014, + .end = 0xffd9001f, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 58, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device tmu4_device = { + .name = "sh_tmu", + .id = 4, + .dev = { + .platform_data = &tmu4_platform_data, + }, + .resource = tmu4_resources, + .num_resources = ARRAY_SIZE(tmu4_resources), +}; + +static struct sh_timer_config tmu5_platform_data = { + .name = "TMU5", + .channel_offset = 0x1c, + .timer_bit = 2, + .clk = "tmu1", +}; + +static struct resource tmu5_resources[] = { + [0] = { + .name = "TMU5", + .start = 0xffd90020, + .end = 0xffd9002b, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 57, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device tmu5_device = { + .name = "sh_tmu", + .id = 5, + .dev = { + .platform_data = &tmu5_platform_data, + }, + .resource = tmu5_resources, + .num_resources = ARRAY_SIZE(tmu5_resources), +}; + static struct platform_device *sh7724_devices[] __initdata = { &cmt_device, + &tmu0_device, + &tmu1_device, + &tmu2_device, + &tmu3_device, + &tmu4_device, + &tmu5_device, &sci_device, &rtc_device, &iic0_device, @@ -296,6 +485,12 @@ device_initcall(sh7724_devices_setup); static struct platform_device *sh7724_early_devices[] __initdata = { &cmt_device, + &tmu0_device, + &tmu1_device, + &tmu2_device, + &tmu3_device, + &tmu4_device, + &tmu5_device, }; void __init plat_early_device_setup(void) -- cgit v0.10.2 From acd664ab54a449a7257dcb3c7ef9cd1e310b4c4f Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Tue, 12 May 2009 10:01:01 +0000 Subject: sh: TMU platform data for sh7705 This patch adds TMU platform data for sh7705. Both clockevent and clocksource support is enabled. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt diff --git a/arch/sh/kernel/cpu/sh3/setup-sh7705.c b/arch/sh/kernel/cpu/sh3/setup-sh7705.c index 63b67ba..3951366 100644 --- a/arch/sh/kernel/cpu/sh3/setup-sh7705.c +++ b/arch/sh/kernel/cpu/sh3/setup-sh7705.c @@ -13,6 +13,7 @@ #include #include #include +#include #include enum { @@ -116,7 +117,102 @@ static struct platform_device rtc_device = { }, }; +static struct sh_timer_config tmu0_platform_data = { + .name = "TMU0", + .channel_offset = 0x02, + .timer_bit = 0, + .clk = "module_clk", + .clockevent_rating = 200, +}; + +static struct resource tmu0_resources[] = { + [0] = { + .name = "TMU0", + .start = 0xfffffe94, + .end = 0xfffffe9f, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 16, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device tmu0_device = { + .name = "sh_tmu", + .id = 0, + .dev = { + .platform_data = &tmu0_platform_data, + }, + .resource = tmu0_resources, + .num_resources = ARRAY_SIZE(tmu0_resources), +}; + +static struct sh_timer_config tmu1_platform_data = { + .name = "TMU1", + .channel_offset = 0xe, + .timer_bit = 1, + .clk = "module_clk", + .clocksource_rating = 200, +}; + +static struct resource tmu1_resources[] = { + [0] = { + .name = "TMU1", + .start = 0xfffffea0, + .end = 0xfffffeab, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 17, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device tmu1_device = { + .name = "sh_tmu", + .id = 1, + .dev = { + .platform_data = &tmu1_platform_data, + }, + .resource = tmu1_resources, + .num_resources = ARRAY_SIZE(tmu1_resources), +}; + +static struct sh_timer_config tmu2_platform_data = { + .name = "TMU2", + .channel_offset = 0x1a, + .timer_bit = 2, + .clk = "module_clk", +}; + +static struct resource tmu2_resources[] = { + [0] = { + .name = "TMU2", + .start = 0xfffffeac, + .end = 0xfffffebb, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 18, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device tmu2_device = { + .name = "sh_tmu", + .id = 2, + .dev = { + .platform_data = &tmu2_platform_data, + }, + .resource = tmu2_resources, + .num_resources = ARRAY_SIZE(tmu2_resources), +}; + static struct platform_device *sh7705_devices[] __initdata = { + &tmu0_device, + &tmu1_device, + &tmu2_device, &sci_device, &rtc_device, }; @@ -128,6 +224,18 @@ static int __init sh7705_devices_setup(void) } __initcall(sh7705_devices_setup); +static struct platform_device *sh7705_early_devices[] __initdata = { + &tmu0_device, + &tmu1_device, + &tmu2_device, +}; + +void __init plat_early_device_setup(void) +{ + early_platform_add_devices(sh7705_early_devices, + ARRAY_SIZE(sh7705_early_devices)); +} + void __init plat_irq_setup(void) { register_intc_controller(&intc_desc); -- cgit v0.10.2 From c8a9011bce6c43f4988cbcf1db8fc31433e69964 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Tue, 12 May 2009 10:04:49 +0000 Subject: sh: TMU platform data for sh7706/sh7707/sh7708/sh7709 Add TMU platform data for sh7706/sh7707/sh7708/sh7709. Both clockevent and clocksource support is enabled. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt diff --git a/arch/sh/kernel/cpu/sh3/setup-sh770x.c b/arch/sh/kernel/cpu/sh3/setup-sh770x.c index a74f960..9412d91 100644 --- a/arch/sh/kernel/cpu/sh3/setup-sh770x.c +++ b/arch/sh/kernel/cpu/sh3/setup-sh770x.c @@ -18,6 +18,7 @@ #include #include #include +#include enum { UNUSED = 0, @@ -144,7 +145,102 @@ static struct platform_device sci_device = { }, }; +static struct sh_timer_config tmu0_platform_data = { + .name = "TMU0", + .channel_offset = 0x02, + .timer_bit = 0, + .clk = "module_clk", + .clockevent_rating = 200, +}; + +static struct resource tmu0_resources[] = { + [0] = { + .name = "TMU0", + .start = 0xfffffe94, + .end = 0xfffffe9f, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 16, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device tmu0_device = { + .name = "sh_tmu", + .id = 0, + .dev = { + .platform_data = &tmu0_platform_data, + }, + .resource = tmu0_resources, + .num_resources = ARRAY_SIZE(tmu0_resources), +}; + +static struct sh_timer_config tmu1_platform_data = { + .name = "TMU1", + .channel_offset = 0xe, + .timer_bit = 1, + .clk = "module_clk", + .clocksource_rating = 200, +}; + +static struct resource tmu1_resources[] = { + [0] = { + .name = "TMU1", + .start = 0xfffffea0, + .end = 0xfffffeab, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 17, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device tmu1_device = { + .name = "sh_tmu", + .id = 1, + .dev = { + .platform_data = &tmu1_platform_data, + }, + .resource = tmu1_resources, + .num_resources = ARRAY_SIZE(tmu1_resources), +}; + +static struct sh_timer_config tmu2_platform_data = { + .name = "TMU2", + .channel_offset = 0x1a, + .timer_bit = 2, + .clk = "module_clk", +}; + +static struct resource tmu2_resources[] = { + [0] = { + .name = "TMU2", + .start = 0xfffffeac, + .end = 0xfffffebb, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 18, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device tmu2_device = { + .name = "sh_tmu", + .id = 2, + .dev = { + .platform_data = &tmu2_platform_data, + }, + .resource = tmu2_resources, + .num_resources = ARRAY_SIZE(tmu2_resources), +}; + static struct platform_device *sh770x_devices[] __initdata = { + &tmu0_device, + &tmu1_device, + &tmu2_device, &sci_device, &rtc_device, }; @@ -156,6 +252,18 @@ static int __init sh770x_devices_setup(void) } __initcall(sh770x_devices_setup); +static struct platform_device *sh770x_early_devices[] __initdata = { + &tmu0_device, + &tmu1_device, + &tmu2_device, +}; + +void __init plat_early_device_setup(void) +{ + early_platform_add_devices(sh770x_early_devices, + ARRAY_SIZE(sh770x_early_devices)); +} + void __init plat_irq_setup(void) { register_intc_controller(&intc_desc); -- cgit v0.10.2 From e5ad00896a381937326ac55fc173630fe731d041 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Tue, 12 May 2009 10:15:30 +0000 Subject: sh: TMU platform data for sh7710/sh7712 This patch adds TMU platform data for sh7710 and sh7712. Both clockevent and clocksource support is enabled. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt diff --git a/arch/sh/kernel/cpu/sh3/setup-sh7710.c b/arch/sh/kernel/cpu/sh3/setup-sh7710.c index 335098b..07ff38d 100644 --- a/arch/sh/kernel/cpu/sh3/setup-sh7710.c +++ b/arch/sh/kernel/cpu/sh3/setup-sh7710.c @@ -13,6 +13,7 @@ #include #include #include +#include #include enum { @@ -120,7 +121,102 @@ static struct platform_device sci_device = { }, }; +static struct sh_timer_config tmu0_platform_data = { + .name = "TMU0", + .channel_offset = 0x02, + .timer_bit = 0, + .clk = "module_clk", + .clockevent_rating = 200, +}; + +static struct resource tmu0_resources[] = { + [0] = { + .name = "TMU0", + .start = 0xa412fe94, + .end = 0xa412fe9f, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 16, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device tmu0_device = { + .name = "sh_tmu", + .id = 0, + .dev = { + .platform_data = &tmu0_platform_data, + }, + .resource = tmu0_resources, + .num_resources = ARRAY_SIZE(tmu0_resources), +}; + +static struct sh_timer_config tmu1_platform_data = { + .name = "TMU1", + .channel_offset = 0xe, + .timer_bit = 1, + .clk = "module_clk", + .clocksource_rating = 200, +}; + +static struct resource tmu1_resources[] = { + [0] = { + .name = "TMU1", + .start = 0xa412fea0, + .end = 0xa412feab, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 17, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device tmu1_device = { + .name = "sh_tmu", + .id = 1, + .dev = { + .platform_data = &tmu1_platform_data, + }, + .resource = tmu1_resources, + .num_resources = ARRAY_SIZE(tmu1_resources), +}; + +static struct sh_timer_config tmu2_platform_data = { + .name = "TMU2", + .channel_offset = 0x1a, + .timer_bit = 2, + .clk = "module_clk", +}; + +static struct resource tmu2_resources[] = { + [0] = { + .name = "TMU2", + .start = 0xa412feac, + .end = 0xa412feb5, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 18, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device tmu2_device = { + .name = "sh_tmu", + .id = 2, + .dev = { + .platform_data = &tmu2_platform_data, + }, + .resource = tmu2_resources, + .num_resources = ARRAY_SIZE(tmu2_resources), +}; + static struct platform_device *sh7710_devices[] __initdata = { + &tmu0_device, + &tmu1_device, + &tmu2_device, &sci_device, &rtc_device, }; @@ -132,6 +228,18 @@ static int __init sh7710_devices_setup(void) } __initcall(sh7710_devices_setup); +static struct platform_device *sh7710_early_devices[] __initdata = { + &tmu0_device, + &tmu1_device, + &tmu2_device, +}; + +void __init plat_early_device_setup(void) +{ + early_platform_add_devices(sh7710_early_devices, + ARRAY_SIZE(sh7710_early_devices)); +} + void __init plat_irq_setup(void) { register_intc_controller(&intc_desc); -- cgit v0.10.2 From 4a1a5a2f60ceabc026ba28cdbf81d7d47603b480 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Tue, 12 May 2009 10:17:52 +0000 Subject: sh: TMU platform data for sh7720/sh7721 This patch adds TMU platform data for sh7720 and sh7721. Both clockevent and clocksource support is enabled. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt diff --git a/arch/sh/kernel/cpu/sh3/setup-sh7720.c b/arch/sh/kernel/cpu/sh3/setup-sh7720.c index 003874a..c09619c 100644 --- a/arch/sh/kernel/cpu/sh3/setup-sh7720.c +++ b/arch/sh/kernel/cpu/sh3/setup-sh7720.c @@ -18,6 +18,7 @@ #include #include #include +#include #include static struct resource rtc_resources[] = { @@ -123,7 +124,103 @@ static struct platform_device usbf_device = { .resource = usbf_resources, }; + +static struct sh_timer_config tmu0_platform_data = { + .name = "TMU0", + .channel_offset = 0x02, + .timer_bit = 0, + .clk = "module_clk", + .clockevent_rating = 200, +}; + +static struct resource tmu0_resources[] = { + [0] = { + .name = "TMU0", + .start = 0xa412fe94, + .end = 0xa412fe9f, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 16, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device tmu0_device = { + .name = "sh_tmu", + .id = 0, + .dev = { + .platform_data = &tmu0_platform_data, + }, + .resource = tmu0_resources, + .num_resources = ARRAY_SIZE(tmu0_resources), +}; + +static struct sh_timer_config tmu1_platform_data = { + .name = "TMU1", + .channel_offset = 0xe, + .timer_bit = 1, + .clk = "module_clk", + .clocksource_rating = 200, +}; + +static struct resource tmu1_resources[] = { + [0] = { + .name = "TMU1", + .start = 0xa412fea0, + .end = 0xa412feab, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 17, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device tmu1_device = { + .name = "sh_tmu", + .id = 1, + .dev = { + .platform_data = &tmu1_platform_data, + }, + .resource = tmu1_resources, + .num_resources = ARRAY_SIZE(tmu1_resources), +}; + +static struct sh_timer_config tmu2_platform_data = { + .name = "TMU2", + .channel_offset = 0x1a, + .timer_bit = 2, + .clk = "module_clk", +}; + +static struct resource tmu2_resources[] = { + [0] = { + .name = "TMU2", + .start = 0xa412feac, + .end = 0xa412feb5, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 18, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device tmu2_device = { + .name = "sh_tmu", + .id = 2, + .dev = { + .platform_data = &tmu2_platform_data, + }, + .resource = tmu2_resources, + .num_resources = ARRAY_SIZE(tmu2_resources), +}; + static struct platform_device *sh7720_devices[] __initdata = { + &tmu0_device, + &tmu1_device, + &tmu2_device, &rtc_device, &sci_device, &usb_ohci_device, @@ -137,6 +234,18 @@ static int __init sh7720_devices_setup(void) } __initcall(sh7720_devices_setup); +static struct platform_device *sh7720_early_devices[] __initdata = { + &tmu0_device, + &tmu1_device, + &tmu2_device, +}; + +void __init plat_early_device_setup(void) +{ + early_platform_add_devices(sh7720_early_devices, + ARRAY_SIZE(sh7720_early_devices)); +} + enum { UNUSED = 0, -- cgit v0.10.2 From 2b23a8826a60268ec52302729911dd7ac6b10776 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Tue, 12 May 2009 10:21:11 +0000 Subject: sh: CMT platform data for sh7720/sh7721 This patch adds CMT platform data for sh7720 and sh7721. All 5 32-bit CMT channels unfortunately share a single IRQ. Both clockevent and clocksource support is enabled. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig index a9dee13..5391746 100644 --- a/arch/sh/Kconfig +++ b/arch/sh/Kconfig @@ -302,6 +302,7 @@ config CPU_SUBTYPE_SH7720 bool "Support SH7720 processor" select CPU_SH3 select CPU_HAS_DSP + select SYS_SUPPORTS_CMT help Select SH7720 if you have a SH3-DSP SH7720 CPU. @@ -309,6 +310,7 @@ config CPU_SUBTYPE_SH7721 bool "Support SH7721 processor" select CPU_SH3 select CPU_HAS_DSP + select SYS_SUPPORTS_CMT help Select SH7721 if you have a SH3-DSP SH7721 CPU. diff --git a/arch/sh/kernel/cpu/sh3/setup-sh7720.c b/arch/sh/kernel/cpu/sh3/setup-sh7720.c index c09619c..d8b46f5 100644 --- a/arch/sh/kernel/cpu/sh3/setup-sh7720.c +++ b/arch/sh/kernel/cpu/sh3/setup-sh7720.c @@ -124,6 +124,157 @@ static struct platform_device usbf_device = { .resource = usbf_resources, }; +static struct sh_timer_config cmt0_platform_data = { + .name = "CMT0", + .channel_offset = 0x10, + .timer_bit = 0, + .clk = "module_clk", + .clockevent_rating = 125, + .clocksource_rating = 125, +}; + +static struct resource cmt0_resources[] = { + [0] = { + .name = "CMT0", + .start = 0x044a0010, + .end = 0x044a001b, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 104, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device cmt0_device = { + .name = "sh_cmt", + .id = 0, + .dev = { + .platform_data = &cmt0_platform_data, + }, + .resource = cmt0_resources, + .num_resources = ARRAY_SIZE(cmt0_resources), +}; + +static struct sh_timer_config cmt1_platform_data = { + .name = "CMT1", + .channel_offset = 0x20, + .timer_bit = 1, + .clk = "module_clk", +}; + +static struct resource cmt1_resources[] = { + [0] = { + .name = "CMT1", + .start = 0x044a0020, + .end = 0x044a002b, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 104, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device cmt1_device = { + .name = "sh_cmt", + .id = 1, + .dev = { + .platform_data = &cmt1_platform_data, + }, + .resource = cmt1_resources, + .num_resources = ARRAY_SIZE(cmt1_resources), +}; + +static struct sh_timer_config cmt2_platform_data = { + .name = "CMT2", + .channel_offset = 0x30, + .timer_bit = 2, + .clk = "module_clk", +}; + +static struct resource cmt2_resources[] = { + [0] = { + .name = "CMT2", + .start = 0x044a0030, + .end = 0x044a003b, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 104, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device cmt2_device = { + .name = "sh_cmt", + .id = 2, + .dev = { + .platform_data = &cmt2_platform_data, + }, + .resource = cmt2_resources, + .num_resources = ARRAY_SIZE(cmt2_resources), +}; + +static struct sh_timer_config cmt3_platform_data = { + .name = "CMT3", + .channel_offset = 0x40, + .timer_bit = 3, + .clk = "module_clk", +}; + +static struct resource cmt3_resources[] = { + [0] = { + .name = "CMT3", + .start = 0x044a0040, + .end = 0x044a004b, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 104, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device cmt3_device = { + .name = "sh_cmt", + .id = 3, + .dev = { + .platform_data = &cmt3_platform_data, + }, + .resource = cmt3_resources, + .num_resources = ARRAY_SIZE(cmt3_resources), +}; + +static struct sh_timer_config cmt4_platform_data = { + .name = "CMT4", + .channel_offset = 0x50, + .timer_bit = 4, + .clk = "module_clk", +}; + +static struct resource cmt4_resources[] = { + [0] = { + .name = "CMT4", + .start = 0x044a0050, + .end = 0x044a005b, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 104, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device cmt4_device = { + .name = "sh_cmt", + .id = 4, + .dev = { + .platform_data = &cmt4_platform_data, + }, + .resource = cmt4_resources, + .num_resources = ARRAY_SIZE(cmt4_resources), +}; static struct sh_timer_config tmu0_platform_data = { .name = "TMU0", @@ -218,6 +369,11 @@ static struct platform_device tmu2_device = { }; static struct platform_device *sh7720_devices[] __initdata = { + &cmt0_device, + &cmt1_device, + &cmt2_device, + &cmt3_device, + &cmt4_device, &tmu0_device, &tmu1_device, &tmu2_device, @@ -235,6 +391,11 @@ static int __init sh7720_devices_setup(void) __initcall(sh7720_devices_setup); static struct platform_device *sh7720_early_devices[] __initdata = { + &cmt0_device, + &cmt1_device, + &cmt2_device, + &cmt3_device, + &cmt4_device, &tmu0_device, &tmu1_device, &tmu2_device, -- cgit v0.10.2 From f19900b2e608b604777a74d6d711bbf744657756 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Tue, 12 May 2009 10:25:54 +0000 Subject: sh: remove old TMU driver This patch removes the old TMU driver (CONFIG_SH_TMU/timer-tmu.c) As replacement, select the sh_tmu driver with CONFIG_SH_TIMER_TMU and configure timer channel using platform data. If multiple TMU channels are enabled using platform data, use the earlytimer parameter on the kernel command line to select channel. For instance, use "earlytimer=sh_tmu.0" to select the first channel. To verify which timer is being used, look at printouts or the timer irq count in /proc/interrupts. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig index 5391746..e7b6406 100644 --- a/arch/sh/Kconfig +++ b/arch/sh/Kconfig @@ -473,16 +473,9 @@ source "arch/sh/boards/Kconfig" menu "Timer and clock configuration" -config SH_TMU - bool "TMU timer support" - depends on CPU_SH3 || CPU_SH4 - default y - help - This enables the use of the TMU as the system timer. - config SH_TIMER_TMU bool "TMU timer driver" - depends on !SH_TMU && SYS_SUPPORTS_TMU + depends on SYS_SUPPORTS_TMU default y help This enables the build of the TMU timer driver. diff --git a/arch/sh/include/asm/timer.h b/arch/sh/include/asm/timer.h index 6c08511..f27a88b 100644 --- a/arch/sh/include/asm/timer.h +++ b/arch/sh/include/asm/timer.h @@ -18,7 +18,6 @@ struct sys_timer { struct sys_timer_ops *ops; }; -extern struct sys_timer tmu_timer; extern struct sys_timer *sys_timer; /* arch/sh/kernel/timers/timer.c */ diff --git a/arch/sh/include/cpu-sh3/cpu/timer.h b/arch/sh/include/cpu-sh3/cpu/timer.h deleted file mode 100644 index 793acf1..0000000 --- a/arch/sh/include/cpu-sh3/cpu/timer.h +++ /dev/null @@ -1,67 +0,0 @@ -/* - * include/asm-sh/cpu-sh3/timer.h - * - * Copyright (C) 2004 Lineo Solutions, Inc. - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ -#ifndef __ASM_CPU_SH3_TIMER_H -#define __ASM_CPU_SH3_TIMER_H - -/* - * --------------------------------------------------------------------------- - * TMU Common definitions for SH3 processors - * SH7706 - * SH7709S - * SH7727 - * SH7729R - * SH7710 - * SH7720 - * SH7710 - * --------------------------------------------------------------------------- - */ - -#if !defined(CONFIG_CPU_SUBTYPE_SH7720) && !defined(CONFIG_CPU_SUBTYPE_SH7721) -#define TMU_TOCR 0xfffffe90 /* Byte access */ -#endif - -#if defined(CONFIG_CPU_SUBTYPE_SH7710) || \ - defined(CONFIG_CPU_SUBTYPE_SH7720) || \ - defined(CONFIG_CPU_SUBTYPE_SH7721) -#define TMU_012_TSTR 0xa412fe92 /* Byte access */ - -#define TMU0_TCOR 0xa412fe94 /* Long access */ -#define TMU0_TCNT 0xa412fe98 /* Long access */ -#define TMU0_TCR 0xa412fe9c /* Word access */ - -#define TMU1_TCOR 0xa412fea0 /* Long access */ -#define TMU1_TCNT 0xa412fea4 /* Long access */ -#define TMU1_TCR 0xa412fea8 /* Word access */ - -#define TMU2_TCOR 0xa412feac /* Long access */ -#define TMU2_TCNT 0xa412feb0 /* Long access */ -#define TMU2_TCR 0xa412feb4 /* Word access */ - -#else -#define TMU_012_TSTR 0xfffffe92 /* Byte access */ - -#define TMU0_TCOR 0xfffffe94 /* Long access */ -#define TMU0_TCNT 0xfffffe98 /* Long access */ -#define TMU0_TCR 0xfffffe9c /* Word access */ - -#define TMU1_TCOR 0xfffffea0 /* Long access */ -#define TMU1_TCNT 0xfffffea4 /* Long access */ -#define TMU1_TCR 0xfffffea8 /* Word access */ - -#define TMU2_TCOR 0xfffffeac /* Long access */ -#define TMU2_TCNT 0xfffffeb0 /* Long access */ -#define TMU2_TCR 0xfffffeb4 /* Word access */ -#if !defined(CONFIG_CPU_SUBTYPE_SH7720) && !defined(CONFIG_CPU_SUBTYPE_SH7721) -#define TMU2_TCPR2 0xfffffeb8 /* Long access */ -#endif -#endif - -#endif /* __ASM_CPU_SH3_TIMER_H */ - diff --git a/arch/sh/include/cpu-sh4/cpu/timer.h b/arch/sh/include/cpu-sh4/cpu/timer.h deleted file mode 100644 index d1e796b..0000000 --- a/arch/sh/include/cpu-sh4/cpu/timer.h +++ /dev/null @@ -1,60 +0,0 @@ -/* - * include/asm-sh/cpu-sh4/timer.h - * - * Copyright (C) 2004 Lineo Solutions, Inc. - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ -#ifndef __ASM_CPU_SH4_TIMER_H -#define __ASM_CPU_SH4_TIMER_H - -/* - * --------------------------------------------------------------------------- - * TMU Common definitions for SH4 processors - * SH7750S/SH7750R - * SH7751/SH7751R - * SH7760 - * SH-X3 - * --------------------------------------------------------------------------- - */ -#ifdef CONFIG_CPU_SUBTYPE_SHX3 -#define TMU_012_BASE 0xffc10000 -#define TMU_345_BASE 0xffc20000 -#else -#define TMU_012_BASE 0xffd80000 -#define TMU_345_BASE 0xfe100000 -#endif - -#define TMU_TOCR TMU_012_BASE /* Not supported on all CPUs */ - -#define TMU_012_TSTR (TMU_012_BASE + 0x04) -#define TMU_345_TSTR (TMU_345_BASE + 0x04) - -#define TMU0_TCOR (TMU_012_BASE + 0x08) -#define TMU0_TCNT (TMU_012_BASE + 0x0c) -#define TMU0_TCR (TMU_012_BASE + 0x10) - -#define TMU1_TCOR (TMU_012_BASE + 0x14) -#define TMU1_TCNT (TMU_012_BASE + 0x18) -#define TMU1_TCR (TMU_012_BASE + 0x1c) - -#define TMU2_TCOR (TMU_012_BASE + 0x20) -#define TMU2_TCNT (TMU_012_BASE + 0x24) -#define TMU2_TCR (TMU_012_BASE + 0x28) -#define TMU2_TCPR (TMU_012_BASE + 0x2c) - -#define TMU3_TCOR (TMU_345_BASE + 0x08) -#define TMU3_TCNT (TMU_345_BASE + 0x0c) -#define TMU3_TCR (TMU_345_BASE + 0x10) - -#define TMU4_TCOR (TMU_345_BASE + 0x14) -#define TMU4_TCNT (TMU_345_BASE + 0x18) -#define TMU4_TCR (TMU_345_BASE + 0x1c) - -#define TMU5_TCOR (TMU_345_BASE + 0x20) -#define TMU5_TCNT (TMU_345_BASE + 0x24) -#define TMU5_TCR (TMU_345_BASE + 0x28) - -#endif /* __ASM_CPU_SH4_TIMER_H */ diff --git a/arch/sh/kernel/timers/Makefile b/arch/sh/kernel/timers/Makefile index 8bceba5..fefd7ed 100644 --- a/arch/sh/kernel/timers/Makefile +++ b/arch/sh/kernel/timers/Makefile @@ -3,5 +3,3 @@ # obj-y := timer.o - -obj-$(CONFIG_SH_TMU) += timer-tmu.o diff --git a/arch/sh/kernel/timers/timer-tmu.c b/arch/sh/kernel/timers/timer-tmu.c deleted file mode 100644 index fe8d893..0000000 --- a/arch/sh/kernel/timers/timer-tmu.c +++ /dev/null @@ -1,297 +0,0 @@ -/* - * arch/sh/kernel/timers/timer-tmu.c - TMU Timer Support - * - * Copyright (C) 2005 - 2007 Paul Mundt - * - * TMU handling code hacked out of arch/sh/kernel/time.c - * - * Copyright (C) 1999 Tetsuya Okada & Niibe Yutaka - * Copyright (C) 2000 Philipp Rumpf - * Copyright (C) 2002, 2003, 2004 Paul Mundt - * Copyright (C) 2002 M. R. Brown - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#define TMU_TOCR_INIT 0x00 -#define TMU_TCR_INIT 0x0020 - -#define TMU0 (0) -#define TMU1 (1) - -static inline void _tmu_start(int tmu_num) -{ - ctrl_outb(ctrl_inb(TMU_012_TSTR) | (0x1<mode == CLOCK_EVT_MODE_PERIODIC); - _tmu_set_irq(TMU0,1); - return 0; -} - -static void tmu_set_mode(enum clock_event_mode mode, - struct clock_event_device *evt) -{ - switch (mode) { - case CLOCK_EVT_MODE_PERIODIC: - ctrl_outl(tmu_latest_interval[TMU0], TMU0_TCOR); - break; - case CLOCK_EVT_MODE_ONESHOT: - ctrl_outl(0, TMU0_TCOR); - break; - case CLOCK_EVT_MODE_UNUSED: - case CLOCK_EVT_MODE_SHUTDOWN: - case CLOCK_EVT_MODE_RESUME: - break; - } -} - -static struct clock_event_device tmu0_clockevent = { - .name = "tmu0", - .shift = 32, - .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT, - .set_mode = tmu_set_mode, - .set_next_event = tmu_set_next_event, -}; - -static irqreturn_t tmu_timer_interrupt(int irq, void *dummy) -{ - struct clock_event_device *evt = &tmu0_clockevent; - _tmu_clear_status(TMU0); - _tmu_set_irq(TMU0,tmu0_clockevent.mode != CLOCK_EVT_MODE_ONESHOT); - - switch (tmu0_clockevent.mode) { - case CLOCK_EVT_MODE_ONESHOT: - case CLOCK_EVT_MODE_PERIODIC: - evt->event_handler(evt); - break; - default: - break; - } - - return IRQ_HANDLED; -} - -static struct irqaction tmu0_irq = { - .name = "periodic/oneshot timer", - .handler = tmu_timer_interrupt, - .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL, -}; - -static void __init tmu_clk_init(struct clk *clk) -{ - u8 divisor = TMU_TCR_INIT & 0x7; - int tmu_num = clk->name[3]-'0'; - ctrl_outw(TMU_TCR_INIT, TMU0_TCR+(tmu_num*0xC)); - clk->rate = clk_get_rate(clk->parent) / (4 << (divisor << 1)); -} - -static void tmu_clk_recalc(struct clk *clk) -{ - int tmu_num = clk->name[3]-'0'; - unsigned long prev_rate = clk_get_rate(clk); - unsigned long flags; - u8 divisor = ctrl_inw(TMU0_TCR+tmu_num*0xC) & 0x7; - clk->rate = clk_get_rate(clk->parent) / (4 << (divisor << 1)); - - if(prev_rate==clk_get_rate(clk)) - return; - - if(tmu_num) - return; /* No more work on TMU1 */ - - local_irq_save(flags); - tmus_are_scaled = (prev_rate > clk->rate); - - _tmu_stop(TMU0); - - tmu0_clockevent.mult = div_sc(clk->rate, NSEC_PER_SEC, - tmu0_clockevent.shift); - tmu0_clockevent.max_delta_ns = - clockevent_delta2ns(-1, &tmu0_clockevent); - tmu0_clockevent.min_delta_ns = - clockevent_delta2ns(1, &tmu0_clockevent); - - if (tmus_are_scaled) - tmu_latest_interval[TMU0] >>= 1; - else - tmu_latest_interval[TMU0] <<= 1; - - tmu_timer_set_interval(TMU0, - tmu_latest_interval[TMU0], - tmu0_clockevent.mode == CLOCK_EVT_MODE_PERIODIC); - - _tmu_start(TMU0); - - local_irq_restore(flags); -} - -static struct clk_ops tmu_clk_ops = { - .init = tmu_clk_init, - .recalc = tmu_clk_recalc, -}; - -static struct clk tmu0_clk = { - .name = "tmu0_clk", - .ops = &tmu_clk_ops, -}; - -static struct clk tmu1_clk = { - .name = "tmu1_clk", - .ops = &tmu_clk_ops, -}; - -static int tmu_timer_init(void) -{ - unsigned long interval; - unsigned long frequency; - - setup_irq(CONFIG_SH_TIMER_IRQ, &tmu0_irq); - - tmu0_clk.parent = clk_get(NULL, "module_clk"); - tmu1_clk.parent = clk_get(NULL, "module_clk"); - - tmu_timer_stop(); - -#if !defined(CONFIG_CPU_SUBTYPE_SH7720) && \ - !defined(CONFIG_CPU_SUBTYPE_SH7721) && \ - !defined(CONFIG_CPU_SUBTYPE_SH7760) && \ - !defined(CONFIG_CPU_SUBTYPE_SH7785) && \ - !defined(CONFIG_CPU_SUBTYPE_SH7786) && \ - !defined(CONFIG_CPU_SUBTYPE_SHX3) - ctrl_outb(TMU_TOCR_INIT, TMU_TOCR); -#endif - - clk_register(&tmu0_clk); - clk_register(&tmu1_clk); - clk_enable(&tmu0_clk); - clk_enable(&tmu1_clk); - - frequency = clk_get_rate(&tmu0_clk); - interval = (frequency + HZ / 2) / HZ; - - tmu_timer_set_interval(TMU0,interval, 1); - tmu_timer_set_interval(TMU1,~0,1); - - _tmu_start(TMU1); - - clocksource_sh.rating = 200; - clocksource_sh.mask = CLOCKSOURCE_MASK(32); - clocksource_sh.read = tmu_timer_read; - clocksource_sh.shift = 10; - clocksource_sh.mult = clocksource_hz2mult(clk_get_rate(&tmu1_clk), - clocksource_sh.shift); - clocksource_sh.flags = CLOCK_SOURCE_IS_CONTINUOUS; - clocksource_register(&clocksource_sh); - - tmu0_clockevent.mult = div_sc(frequency, NSEC_PER_SEC, - tmu0_clockevent.shift); - tmu0_clockevent.max_delta_ns = - clockevent_delta2ns(-1, &tmu0_clockevent); - tmu0_clockevent.min_delta_ns = - clockevent_delta2ns(1, &tmu0_clockevent); - - tmu0_clockevent.cpumask = cpumask_of(0); - tmu0_clockevent.rating = 100; - - clockevents_register_device(&tmu0_clockevent); - - return 0; -} - -static struct sys_timer_ops tmu_timer_ops = { - .init = tmu_timer_init, - .start = tmu_timer_start, - .stop = tmu_timer_stop, -}; - -struct sys_timer tmu_timer = { - .name = "tmu", - .ops = &tmu_timer_ops, -}; diff --git a/arch/sh/kernel/timers/timer.c b/arch/sh/kernel/timers/timer.c index 920891a..f8812bd 100644 --- a/arch/sh/kernel/timers/timer.c +++ b/arch/sh/kernel/timers/timer.c @@ -14,9 +14,6 @@ #include static struct sys_timer *sys_timers[] = { -#ifdef CONFIG_SH_TMU - &tmu_timer, -#endif NULL, }; -- cgit v0.10.2 From 8be5f1a68f2c14082939dd54e7037dcee2eb54f8 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Tue, 12 May 2009 19:53:55 +0900 Subject: sh: Kill off the remnants of the old timer code. Now with all of the TMU users moved over to the new TMU driver, and the old TMU driver killed off, the left-over infrastructure can go along with it. Signed-off-by: Paul Mundt diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig index e7b6406..fb75c2d 100644 --- a/arch/sh/Kconfig +++ b/arch/sh/Kconfig @@ -494,17 +494,6 @@ config SH_TIMER_MTU2 help This enables build of the MTU2 timer driver. -config SH_TIMER_IRQ - int - default "28" if CPU_SUBTYPE_SH7780 || CPU_SUBTYPE_SH7785 || \ - CPU_SUBTYPE_SH7763 - default "86" if CPU_SUBTYPE_SH7619 - default "140" if CPU_SUBTYPE_SH7206 - default "142" if CPU_SUBTYPE_SH7203 && SH_CMT - default "153" if CPU_SUBTYPE_SH7203 && SH_MTU2 - default "238" if CPU_SUBTYPE_MXG - default "16" - config SH_PCLK_FREQ int "Peripheral clock frequency (in Hz)" default "27000000" if CPU_SUBTYPE_SH7343 diff --git a/arch/sh/include/asm/timer.h b/arch/sh/include/asm/timer.h deleted file mode 100644 index f27a88b..0000000 --- a/arch/sh/include/asm/timer.h +++ /dev/null @@ -1,28 +0,0 @@ -#ifndef __ASM_SH_TIMER_H -#define __ASM_SH_TIMER_H - -#include -#include -#include - -struct sys_timer_ops { - int (*init)(void); - int (*start)(void); - int (*stop)(void); -}; - -struct sys_timer { - const char *name; - - struct sys_device dev; - struct sys_timer_ops *ops; -}; - -extern struct sys_timer *sys_timer; - -/* arch/sh/kernel/timers/timer.c */ -struct sys_timer *get_sys_timer(void); - -extern struct clocksource clocksource_sh; - -#endif /* __ASM_SH_TIMER_H */ diff --git a/arch/sh/kernel/Makefile_32 b/arch/sh/kernel/Makefile_32 index aee08af..9411e3e 100644 --- a/arch/sh/kernel/Makefile_32 +++ b/arch/sh/kernel/Makefile_32 @@ -14,7 +14,7 @@ obj-y := debugtraps.o idle.o io.o io_generic.o irq.o \ sys_sh.o sys_sh32.o syscalls_32.o time.o topology.o \ traps.o traps_32.o -obj-y += cpu/ timers/ +obj-y += cpu/ obj-$(CONFIG_VSYSCALL) += vsyscall/ obj-$(CONFIG_SMP) += smp.o obj-$(CONFIG_SH_STANDARD_BIOS) += sh_bios.o diff --git a/arch/sh/kernel/Makefile_64 b/arch/sh/kernel/Makefile_64 index c845a0d..67b9f6c 100644 --- a/arch/sh/kernel/Makefile_64 +++ b/arch/sh/kernel/Makefile_64 @@ -4,7 +4,7 @@ obj-y := debugtraps.o idle.o io.o io_generic.o irq.o machvec.o process_64.o \ ptrace_64.o setup.o signal_64.o sys_sh.o sys_sh64.o \ syscalls_64.o time.o topology.o traps.o traps_64.o -obj-y += cpu/ timers/ +obj-y += cpu/ obj-$(CONFIG_SMP) += smp.o obj-$(CONFIG_SH_CPU_FREQ) += cpufreq.o obj-$(CONFIG_MODULES) += sh_ksyms_64.o module.o diff --git a/arch/sh/kernel/cpu/clock.c b/arch/sh/kernel/cpu/clock.c index 133dbe4..f54769f 100644 --- a/arch/sh/kernel/cpu/clock.c +++ b/arch/sh/kernel/cpu/clock.c @@ -26,7 +26,6 @@ #include #include #include -#include static LIST_HEAD(clock_list); static DEFINE_SPINLOCK(clock_lock); diff --git a/arch/sh/kernel/time.c b/arch/sh/kernel/time.c index a77838f..2edde32 100644 --- a/arch/sh/kernel/time.c +++ b/arch/sh/kernel/time.c @@ -22,9 +22,6 @@ #include #include #include -#include - -struct sys_timer *sys_timer; /* Dummy RTC ops */ static void null_rtc_get_time(struct timespec *tv) @@ -94,20 +91,9 @@ module_init(rtc_generic_init); void (*board_time_init)(void); -struct clocksource clocksource_sh = { - .name = "SuperH", -}; - unsigned long long sched_clock(void) { - unsigned long long cycles; - - /* jiffies based sched_clock if no clocksource is installed */ - if (!clocksource_sh.rating) - return (jiffies_64 - INITIAL_JIFFIES) * (NSEC_PER_SEC / HZ); - - cycles = clocksource_sh.read(&clocksource_sh); - return cyc2ns(&clocksource_sh, cycles); + return (jiffies_64 - INITIAL_JIFFIES) * (NSEC_PER_SEC / HZ); } static void __init sh_late_time_init(void) @@ -117,18 +103,7 @@ static void __init sh_late_time_init(void) * Run probe() for one "earlytimer" device. */ early_platform_driver_register_all("earlytimer"); - if (early_platform_driver_probe("earlytimer", 1, 0)) - return; - - /* - * Find the timer to use as the system timer, it will be - * initialized for us. - */ - sys_timer = get_sys_timer(); - if (unlikely(!sys_timer)) - panic("System timer missing.\n"); - - printk(KERN_INFO "Using %s for system timer\n", sys_timer->name); + early_platform_driver_probe("earlytimer", 1, 0); } void __init time_init(void) diff --git a/arch/sh/kernel/timers/Makefile b/arch/sh/kernel/timers/Makefile deleted file mode 100644 index fefd7ed..0000000 --- a/arch/sh/kernel/timers/Makefile +++ /dev/null @@ -1,5 +0,0 @@ -# -# Makefile for the various Linux/SuperH timers -# - -obj-y := timer.o diff --git a/arch/sh/kernel/timers/timer.c b/arch/sh/kernel/timers/timer.c deleted file mode 100644 index f8812bd..0000000 --- a/arch/sh/kernel/timers/timer.c +++ /dev/null @@ -1,46 +0,0 @@ -/* - * arch/sh/kernel/timers/timer.c - Common timer code - * - * Copyright (C) 2005 Paul Mundt - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ -#include -#include -#include -#include -#include - -static struct sys_timer *sys_timers[] = { - NULL, -}; - -static char timer_override[10]; -static int __init timer_setup(char *str) -{ - if (str) - strlcpy(timer_override, str, sizeof(timer_override)); - return 1; -} -__setup("timer=", timer_setup); - -struct sys_timer *get_sys_timer(void) -{ - int i; - - for (i = 0; i < ARRAY_SIZE(sys_timers); i++) { - struct sys_timer *t = sys_timers[i]; - - if (unlikely(!t)) - break; - if (unlikely(timer_override[0])) - if ((strcmp(timer_override, t->name) != 0)) - continue; - if (likely(t->ops->init() == 0)) - return t; - } - - return NULL; -} -- cgit v0.10.2 From ad3256e361663923342bff7f292dd289f794aa33 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Thu, 14 May 2009 17:40:08 +0900 Subject: sh: Provide FORCE_MAX_ZONEORDER. Several platforms want to be able to do large physically contiguous allocations (primarily nommu and video codecs on SH-Mobile), provide a MAX_ORDER override for those cases. Tested-by: Conrad Parker Signed-off-by: Paul Mundt diff --git a/arch/sh/mm/Kconfig b/arch/sh/mm/Kconfig index b900d2cd..2795618 100644 --- a/arch/sh/mm/Kconfig +++ b/arch/sh/mm/Kconfig @@ -21,6 +21,29 @@ config PAGE_OFFSET default "0x20000000" if MMU && SUPERH64 default "0x00000000" +config FORCE_MAX_ZONEORDER + int "Maximum zone order" + range 9 64 if PAGE_SIZE_16KB + default "9" if PAGE_SIZE_16KB + range 7 64 if PAGE_SIZE_64KB + default "7" if PAGE_SIZE_64KB + range 11 64 + default "14" if !MMU + default "11" + help + The kernel memory allocator divides physically contiguous memory + blocks into "zones", where each zone is a power of two number of + pages. This option selects the largest power of two that the kernel + keeps in the memory allocator. If you need to allocate very large + blocks of physically contiguous memory, then you may need to + increase this value. + + This config option is actually maximum order plus one. For example, + a value of 11 means that the largest free memory block is 2^10 pages. + + The page size is not necessarily 4KB. Keep this in mind when + choosing a value for this option. + config MEMORY_START hex "Physical memory start address" default "0x08000000" -- cgit v0.10.2 From 9304d0ccf1922b9b954b6e9223d1b2bc83198ad2 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Thu, 14 May 2009 07:53:39 +0000 Subject: sh: intc tables for sh7770 This patch adds INTC tables for sh7770, thanks goes to Paul for the first prototype version. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7770.c b/arch/sh/kernel/cpu/sh4a/setup-sh7770.c index b61d614..0feba41 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7770.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7770.c @@ -12,6 +12,7 @@ #include #include #include +#include static struct plat_sci_port sci_platform_data[] = { { @@ -387,6 +388,251 @@ void __init plat_early_device_setup(void) ARRAY_SIZE(sh7770_early_devices)); } +enum { + UNUSED = 0, + + /* interrupt sources */ + IRL_LLLL, IRL_LLLH, IRL_LLHL, IRL_LLHH, + IRL_LHLL, IRL_LHLH, IRL_LHHL, IRL_LHHH, + IRL_HLLL, IRL_HLLH, IRL_HLHL, IRL_HLHH, + IRL_HHLL, IRL_HHLH, IRL_HHHL, + + IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, + + GPIO, + TMU0, TMU1, TMU2, TMU2_TICPI, + TMU3, TMU4, TMU5, TMU5_TICPI, + TMU6, TMU7, TMU8, + HAC, IPI, SPDIF, HUDI, I2C, + DMAC0_DMINT0, DMAC0_DMINT1, DMAC0_DMINT2, + I2S0, I2S1, I2S2, I2S3, + SRC_RX, SRC_TX, SRC_SPDIF, + DU, VIDEO_IN, REMOTE, YUV, USB, ATAPI, CAN, GPS, GFX2D, + GFX3D_MBX, GFX3D_DMAC, + EXBUS_ATA, + SPI0, SPI1, + SCIF089, SCIF1234, SCIF567, + ADC, + BBDMAC_0_3, BBDMAC_4_7, BBDMAC_8_10, BBDMAC_11_14, + BBDMAC_15_18, BBDMAC_19_22, BBDMAC_23_26, BBDMAC_27, + BBDMAC_28, BBDMAC_29, BBDMAC_30, BBDMAC_31, + + /* interrupt groups */ + TMU, DMAC, I2S, SRC, GFX3D, SPI, SCIF, BBDMAC, +}; + +static struct intc_vect vectors[] __initdata = { + INTC_VECT(GPIO, 0x3e0), + INTC_VECT(TMU0, 0x400), INTC_VECT(TMU1, 0x420), + INTC_VECT(TMU2, 0x440), INTC_VECT(TMU2_TICPI, 0x460), + INTC_VECT(TMU3, 0x480), INTC_VECT(TMU4, 0x4a0), + INTC_VECT(TMU5, 0x4c0), INTC_VECT(TMU5_TICPI, 0x4e0), + INTC_VECT(TMU6, 0x500), INTC_VECT(TMU7, 0x520), + INTC_VECT(TMU8, 0x540), + INTC_VECT(HAC, 0x580), INTC_VECT(IPI, 0x5c0), + INTC_VECT(SPDIF, 0x5e0), + INTC_VECT(HUDI, 0x600), INTC_VECT(I2C, 0x620), + INTC_VECT(DMAC0_DMINT0, 0x640), INTC_VECT(DMAC0_DMINT1, 0x660), + INTC_VECT(DMAC0_DMINT2, 0x680), + INTC_VECT(I2S0, 0x6a0), INTC_VECT(I2S1, 0x6c0), + INTC_VECT(I2S2, 0x6e0), INTC_VECT(I2S3, 0x700), + INTC_VECT(SRC_RX, 0x720), INTC_VECT(SRC_TX, 0x740), + INTC_VECT(SRC_SPDIF, 0x760), + INTC_VECT(DU, 0x780), INTC_VECT(VIDEO_IN, 0x7a0), + INTC_VECT(REMOTE, 0x7c0), INTC_VECT(YUV, 0x7e0), + INTC_VECT(USB, 0x840), INTC_VECT(ATAPI, 0x860), + INTC_VECT(CAN, 0x880), INTC_VECT(GPS, 0x8a0), + INTC_VECT(GFX2D, 0x8c0), + INTC_VECT(GFX3D_MBX, 0x900), INTC_VECT(GFX3D_DMAC, 0x920), + INTC_VECT(EXBUS_ATA, 0x940), + INTC_VECT(SPI0, 0x960), INTC_VECT(SPI1, 0x980), + INTC_VECT(SCIF089, 0x9a0), INTC_VECT(SCIF1234, 0x9c0), + INTC_VECT(SCIF1234, 0x9e0), INTC_VECT(SCIF1234, 0xa00), + INTC_VECT(SCIF1234, 0xa20), INTC_VECT(SCIF567, 0xa40), + INTC_VECT(SCIF567, 0xa60), INTC_VECT(SCIF567, 0xa80), + INTC_VECT(SCIF089, 0xaa0), INTC_VECT(SCIF089, 0xac0), + INTC_VECT(ADC, 0xb20), + INTC_VECT(BBDMAC_0_3, 0xba0), INTC_VECT(BBDMAC_0_3, 0xbc0), + INTC_VECT(BBDMAC_0_3, 0xbe0), INTC_VECT(BBDMAC_0_3, 0xc00), + INTC_VECT(BBDMAC_4_7, 0xc20), INTC_VECT(BBDMAC_4_7, 0xc40), + INTC_VECT(BBDMAC_4_7, 0xc60), INTC_VECT(BBDMAC_4_7, 0xc80), + INTC_VECT(BBDMAC_8_10, 0xca0), INTC_VECT(BBDMAC_8_10, 0xcc0), + INTC_VECT(BBDMAC_8_10, 0xce0), INTC_VECT(BBDMAC_11_14, 0xd00), + INTC_VECT(BBDMAC_11_14, 0xd20), INTC_VECT(BBDMAC_11_14, 0xd40), + INTC_VECT(BBDMAC_11_14, 0xd60), INTC_VECT(BBDMAC_15_18, 0xd80), + INTC_VECT(BBDMAC_15_18, 0xda0), INTC_VECT(BBDMAC_15_18, 0xdc0), + INTC_VECT(BBDMAC_15_18, 0xde0), INTC_VECT(BBDMAC_19_22, 0xe00), + INTC_VECT(BBDMAC_19_22, 0xe20), INTC_VECT(BBDMAC_19_22, 0xe40), + INTC_VECT(BBDMAC_19_22, 0xe60), INTC_VECT(BBDMAC_23_26, 0xe80), + INTC_VECT(BBDMAC_23_26, 0xea0), INTC_VECT(BBDMAC_23_26, 0xec0), + INTC_VECT(BBDMAC_23_26, 0xee0), INTC_VECT(BBDMAC_27, 0xf00), + INTC_VECT(BBDMAC_28, 0xf20), INTC_VECT(BBDMAC_29, 0xf40), + INTC_VECT(BBDMAC_30, 0xf60), INTC_VECT(BBDMAC_31, 0xf80), +}; + +static struct intc_group groups[] __initdata = { + INTC_GROUP(TMU, TMU0, TMU1, TMU2, TMU2_TICPI, TMU3, TMU4, TMU5, + TMU5_TICPI, TMU6, TMU7, TMU8), + INTC_GROUP(DMAC, DMAC0_DMINT0, DMAC0_DMINT1, DMAC0_DMINT2), + INTC_GROUP(I2S, I2S0, I2S1, I2S2, I2S3), + INTC_GROUP(SRC, SRC_RX, SRC_TX, SRC_SPDIF), + INTC_GROUP(GFX3D, GFX3D_MBX, GFX3D_DMAC), + INTC_GROUP(SPI, SPI0, SPI1), + INTC_GROUP(SCIF, SCIF089, SCIF1234, SCIF567), + INTC_GROUP(BBDMAC, + BBDMAC_0_3, BBDMAC_4_7, BBDMAC_8_10, BBDMAC_11_14, + BBDMAC_15_18, BBDMAC_19_22, BBDMAC_23_26, BBDMAC_27, + BBDMAC_28, BBDMAC_29, BBDMAC_30, BBDMAC_31), +}; + +static struct intc_mask_reg mask_registers[] __initdata = { + { 0xffe00040, 0xffe00044, 32, /* INT2MSKR / INT2MSKCR */ + { 0, BBDMAC, ADC, SCIF, SPI, EXBUS_ATA, GFX3D, GFX2D, + GPS, CAN, ATAPI, USB, YUV, REMOTE, VIDEO_IN, DU, SRC, I2S, + DMAC, I2C, HUDI, SPDIF, IPI, HAC, TMU, GPIO } }, +}; + +static struct intc_prio_reg prio_registers[] __initdata = { + { 0xffe00000, 0, 32, 8, /* INT2PRI0 */ { GPIO, TMU0, 0, HAC } }, + { 0xffe00004, 0, 32, 8, /* INT2PRI1 */ { IPI, SPDIF, HUDI, I2C } }, + { 0xffe00008, 0, 32, 8, /* INT2PRI2 */ { DMAC, I2S, SRC, DU } }, + { 0xffe0000c, 0, 32, 8, /* INT2PRI3 */ { VIDEO_IN, REMOTE, YUV, USB } }, + { 0xffe00010, 0, 32, 8, /* INT2PRI4 */ { ATAPI, CAN, GPS, GFX2D } }, + { 0xffe00014, 0, 32, 8, /* INT2PRI5 */ { 0, GFX3D, EXBUS_ATA, SPI } }, + { 0xffe00018, 0, 32, 8, /* INT2PRI6 */ { SCIF1234, SCIF567, SCIF089 } }, + { 0xffe0001c, 0, 32, 8, /* INT2PRI7 */ { ADC, 0, 0, BBDMAC_0_3 } }, + { 0xffe00020, 0, 32, 8, /* INT2PRI8 */ + { BBDMAC_4_7, BBDMAC_8_10, BBDMAC_11_14, BBDMAC_15_18 } }, + { 0xffe00024, 0, 32, 8, /* INT2PRI9 */ + { BBDMAC_19_22, BBDMAC_23_26, BBDMAC_27, BBDMAC_28 } }, + { 0xffe00028, 0, 32, 8, /* INT2PRI10 */ + { BBDMAC_29, BBDMAC_30, BBDMAC_31 } }, + { 0xffe0002c, 0, 32, 8, /* INT2PRI11 */ + { TMU1, TMU2, TMU2_TICPI, TMU3 } }, + { 0xffe00030, 0, 32, 8, /* INT2PRI12 */ + { TMU4, TMU5, TMU5_TICPI, TMU6 } }, + { 0xffe00034, 0, 32, 8, /* INT2PRI13 */ + { TMU7, TMU8 } }, +}; + +static DECLARE_INTC_DESC(intc_desc, "sh7770", vectors, groups, + mask_registers, prio_registers, NULL); + +/* Support for external interrupt pins in IRQ mode */ +static struct intc_vect irq_vectors[] __initdata = { + INTC_VECT(IRQ0, 0x240), INTC_VECT(IRQ1, 0x280), + INTC_VECT(IRQ2, 0x2c0), INTC_VECT(IRQ3, 0x300), + INTC_VECT(IRQ4, 0x340), INTC_VECT(IRQ5, 0x380), +}; + +static struct intc_mask_reg irq_mask_registers[] __initdata = { + { 0xffd00044, 0xffd00064, 32, /* INTMSK0 / INTMSKCLR0 */ + { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, } }, +}; + +static struct intc_prio_reg irq_prio_registers[] __initdata = { + { 0xffd00010, 0, 32, 4, /* INTPRI */ { IRQ0, IRQ1, IRQ2, IRQ3, + IRQ4, IRQ5, } }, +}; + +static struct intc_sense_reg irq_sense_registers[] __initdata = { + { 0xffd0001c, 32, 2, /* ICR1 */ { IRQ0, IRQ1, IRQ2, IRQ3, + IRQ4, IRQ5, } }, +}; + +static DECLARE_INTC_DESC(intc_irq_desc, "sh7770-irq", irq_vectors, + NULL, irq_mask_registers, irq_prio_registers, + irq_sense_registers); + +/* External interrupt pins in IRL mode */ +static struct intc_vect irl_vectors[] __initdata = { + INTC_VECT(IRL_LLLL, 0x200), INTC_VECT(IRL_LLLH, 0x220), + INTC_VECT(IRL_LLHL, 0x240), INTC_VECT(IRL_LLHH, 0x260), + INTC_VECT(IRL_LHLL, 0x280), INTC_VECT(IRL_LHLH, 0x2a0), + INTC_VECT(IRL_LHHL, 0x2c0), INTC_VECT(IRL_LHHH, 0x2e0), + INTC_VECT(IRL_HLLL, 0x300), INTC_VECT(IRL_HLLH, 0x320), + INTC_VECT(IRL_HLHL, 0x340), INTC_VECT(IRL_HLHH, 0x360), + INTC_VECT(IRL_HHLL, 0x380), INTC_VECT(IRL_HHLH, 0x3a0), + INTC_VECT(IRL_HHHL, 0x3c0), +}; + +static struct intc_mask_reg irl3210_mask_registers[] __initdata = { + { 0xffd40080, 0xffd40084, 32, /* INTMSK2 / INTMSKCLR2 */ + { IRL_LLLL, IRL_LLLH, IRL_LLHL, IRL_LLHH, + IRL_LHLL, IRL_LHLH, IRL_LHHL, IRL_LHHH, + IRL_HLLL, IRL_HLLH, IRL_HLHL, IRL_HLHH, + IRL_HHLL, IRL_HHLH, IRL_HHHL, } }, +}; + +static struct intc_mask_reg irl7654_mask_registers[] __initdata = { + { 0xffd40080, 0xffd40084, 32, /* INTMSK2 / INTMSKCLR2 */ + { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, + IRL_LLLL, IRL_LLLH, IRL_LLHL, IRL_LLHH, + IRL_LHLL, IRL_LHLH, IRL_LHHL, IRL_LHHH, + IRL_HLLL, IRL_HLLH, IRL_HLHL, IRL_HLHH, + IRL_HHLL, IRL_HHLH, IRL_HHHL, } }, +}; + +static DECLARE_INTC_DESC(intc_irl7654_desc, "sh7780-irl7654", irl_vectors, + NULL, irl7654_mask_registers, NULL, NULL); + +static DECLARE_INTC_DESC(intc_irl3210_desc, "sh7780-irl3210", irl_vectors, + NULL, irl3210_mask_registers, NULL, NULL); + +#define INTC_ICR0 0xffd00000 +#define INTC_INTMSK0 0xffd00044 +#define INTC_INTMSK1 0xffd00048 +#define INTC_INTMSK2 0xffd40080 +#define INTC_INTMSKCLR1 0xffd00068 +#define INTC_INTMSKCLR2 0xffd40084 + void __init plat_irq_setup(void) { + /* disable IRQ7-0 */ + ctrl_outl(0xff000000, INTC_INTMSK0); + + /* disable IRL3-0 + IRL7-4 */ + ctrl_outl(0xc0000000, INTC_INTMSK1); + ctrl_outl(0xfffefffe, INTC_INTMSK2); + + /* select IRL mode for IRL3-0 + IRL7-4 */ + ctrl_outl(ctrl_inl(INTC_ICR0) & ~0x00c00000, INTC_ICR0); + + /* disable holding function, ie enable "SH-4 Mode" */ + ctrl_outl(ctrl_inl(INTC_ICR0) | 0x00200000, INTC_ICR0); + + register_intc_controller(&intc_desc); +} + +void __init plat_irq_setup_pins(int mode) +{ + switch (mode) { + case IRQ_MODE_IRQ: + /* select IRQ mode for IRL3-0 + IRL7-4 */ + ctrl_outl(ctrl_inl(INTC_ICR0) | 0x00c00000, INTC_ICR0); + register_intc_controller(&intc_irq_desc); + break; + case IRQ_MODE_IRL7654: + /* enable IRL7-4 but don't provide any masking */ + ctrl_outl(0x40000000, INTC_INTMSKCLR1); + ctrl_outl(0x0000fffe, INTC_INTMSKCLR2); + break; + case IRQ_MODE_IRL3210: + /* enable IRL0-3 but don't provide any masking */ + ctrl_outl(0x80000000, INTC_INTMSKCLR1); + ctrl_outl(0xfffe0000, INTC_INTMSKCLR2); + break; + case IRQ_MODE_IRL7654_MASK: + /* enable IRL7-4 and mask using cpu intc controller */ + ctrl_outl(0x40000000, INTC_INTMSKCLR1); + register_intc_controller(&intc_irl7654_desc); + break; + case IRQ_MODE_IRL3210_MASK: + /* enable IRL0-3 and mask using cpu intc controller */ + ctrl_outl(0x80000000, INTC_INTMSKCLR1); + register_intc_controller(&intc_irl3210_desc); + break; + default: + BUG(); + } } -- cgit v0.10.2 From bec36eca6f5d1d83a9c3733fc40ba173ad849df2 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Fri, 15 May 2009 12:03:04 +0900 Subject: sh: hd64461: Fix up I/O base register offsets. hd64461 is mapped in a fixed location, so the I/O base itself is fairly meaningless as a configuration item. Additionally, this makes it impossible to share hd64461 code alongside generic drivers (in the case of sh_dac_audio), so simply make it commonly defined and permit the mach_is_foo() logic to work out the proper semantics. Signed-off-by: Paul Mundt diff --git a/arch/sh/cchips/Kconfig b/arch/sh/cchips/Kconfig index f43d183..a5ab2ec 100644 --- a/arch/sh/cchips/Kconfig +++ b/arch/sh/cchips/Kconfig @@ -34,11 +34,6 @@ config HD64461_IRQ Do not change this unless you know what you are doing. -config HD64461_IOBASE - hex "HD64461 start address" - depends on HD64461 - default "0xb0000000" - config HD64461_ENABLER bool "HD64461 PCMCIA enabler" depends on HD64461 diff --git a/arch/sh/include/asm/hd64461.h b/arch/sh/include/asm/hd64461.h index 52b4b62..c16d545 100644 --- a/arch/sh/include/asm/hd64461.h +++ b/arch/sh/include/asm/hd64461.h @@ -13,13 +13,15 @@ #define HD64461_PCC_WINDOW 0x01000000 /* Area 6 - Slot 0 - memory and/or IO card */ -#define HD64461_PCC0_BASE (CONFIG_HD64461_IOBASE + 0x8000000) +#define HD64461_IOBASE 0xb0000000 +#define HD64461_IO_OFFSET(x) (HD64461_IOBASE + (x)) +#define HD64461_PCC0_BASE HD64461_IO_OFFSET(0x8000000) #define HD64461_PCC0_ATTR (HD64461_PCC0_BASE) /* 0xb80000000 */ #define HD64461_PCC0_COMM (HD64461_PCC0_BASE+HD64461_PCC_WINDOW) /* 0xb90000000 */ #define HD64461_PCC0_IO (HD64461_PCC0_BASE+2*HD64461_PCC_WINDOW) /* 0xba0000000 */ /* Area 5 - Slot 1 - memory card only */ -#define HD64461_PCC1_BASE (CONFIG_HD64461_IOBASE + 0x4000000) +#define HD64461_PCC1_BASE HD64461_IO_OFFSET(0x4000000) #define HD64461_PCC1_ATTR (HD64461_PCC1_BASE) /* 0xb4000000 */ #define HD64461_PCC1_COMM (HD64461_PCC1_BASE+HD64461_PCC_WINDOW) /* 0xb5000000 */ @@ -41,19 +43,19 @@ #define HD64461_STBCR_SURTST 0x0001 /* System Configuration Register */ -#define HD64461_SYSCR (CONFIG_HD64461_IOBASE + 0x02) +#define HD64461_SYSCR HD64461_IO_OFFSET(0x02) /* CPU Data Bus Control Register */ -#define HD64461_SCPUCR (CONFIG_HD64461_IOBASE + 0x04) +#define HD64461_SCPUCR HD64461_IO_OFFSET(0x04) /* Base Address Register */ -#define HD64461_LCDCBAR (CONFIG_HD64461_IOBASE + 0x1000) +#define HD64461_LCDCBAR HD64461_IO_OFFSET(0x1000) /* Line increment address */ -#define HD64461_LCDCLOR (CONFIG_HD64461_IOBASE + 0x1002) +#define HD64461_LCDCLOR HD64461_IO_OFFSET(0x1002) /* Controls LCD controller */ -#define HD64461_LCDCCR (CONFIG_HD64461_IOBASE + 0x1004) +#define HD64461_LCDCCR HD64461_IO_OFFSET(0x1004) /* LCCDR control bits */ #define HD64461_LCDCCR_STBACK 0x0400 /* Standby Back */ @@ -64,30 +66,30 @@ #define HD64461_LCDCCR_SPON 0x0010 /* Start Power On */ /* Controls LCD (1) */ -#define HD64461_LDR1 (CONFIG_HD64461_IOBASE + 0x1010) +#define HD64461_LDR1 HD64461_IO_OFFSET(0x1010) #define HD64461_LDR1_DON 0x01 /* Display On */ #define HD64461_LDR1_DINV 0x80 /* Display Invert */ /* Controls LCD (2) */ -#define HD64461_LDR2 (CONFIG_HD64461_IOBASE + 0x1012) -#define HD64461_LDHNCR (CONFIG_HD64461_IOBASE + 0x1014) /* Number of horizontal characters */ -#define HD64461_LDHNSR (CONFIG_HD64461_IOBASE + 0x1016) /* Specify output start position + width of CL1 */ -#define HD64461_LDVNTR (CONFIG_HD64461_IOBASE + 0x1018) /* Specify total vertical lines */ -#define HD64461_LDVNDR (CONFIG_HD64461_IOBASE + 0x101a) /* specify number of display vertical lines */ -#define HD64461_LDVSPR (CONFIG_HD64461_IOBASE + 0x101c) /* specify vertical synchronization pos and AC nr */ +#define HD64461_LDR2 HD64461_IO_OFFSET(0x1012) +#define HD64461_LDHNCR HD64461_IO_OFFSET(0x1014) /* Number of horizontal characters */ +#define HD64461_LDHNSR HD64461_IO_OFFSET(0x1016) /* Specify output start position + width of CL1 */ +#define HD64461_LDVNTR HD64461_IO_OFFSET(0x1018) /* Specify total vertical lines */ +#define HD64461_LDVNDR HD64461_IO_OFFSET(0x101a) /* specify number of display vertical lines */ +#define HD64461_LDVSPR HD64461_IO_OFFSET(0x101c) /* specify vertical synchronization pos and AC nr */ /* Controls LCD (3) */ -#define HD64461_LDR3 (CONFIG_HD64461_IOBASE + 0x101e) +#define HD64461_LDR3 HD64461_IO_OFFSET(0x101e) /* Palette Registers */ -#define HD64461_CPTWAR (CONFIG_HD64461_IOBASE + 0x1030) /* Color Palette Write Address Register */ -#define HD64461_CPTWDR (CONFIG_HD64461_IOBASE + 0x1032) /* Color Palette Write Data Register */ -#define HD64461_CPTRAR (CONFIG_HD64461_IOBASE + 0x1034) /* Color Palette Read Address Register */ -#define HD64461_CPTRDR (CONFIG_HD64461_IOBASE + 0x1036) /* Color Palette Read Data Register */ +#define HD64461_CPTWAR HD64461_IO_OFFSET(0x1030) /* Color Palette Write Address Register */ +#define HD64461_CPTWDR HD64461_IO_OFFSET(0x1032) /* Color Palette Write Data Register */ +#define HD64461_CPTRAR HD64461_IO_OFFSET(0x1034) /* Color Palette Read Address Register */ +#define HD64461_CPTRDR HD64461_IO_OFFSET(0x1036) /* Color Palette Read Data Register */ -#define HD64461_GRDOR (CONFIG_HD64461_IOBASE + 0x1040) /* Display Resolution Offset Register */ -#define HD64461_GRSCR (CONFIG_HD64461_IOBASE + 0x1042) /* Solid Color Register */ -#define HD64461_GRCFGR (CONFIG_HD64461_IOBASE + 0x1044) /* Accelerator Configuration Register */ +#define HD64461_GRDOR HD64461_IO_OFFSET(0x1040) /* Display Resolution Offset Register */ +#define HD64461_GRSCR HD64461_IO_OFFSET(0x1042) /* Solid Color Register */ +#define HD64461_GRCFGR HD64461_IO_OFFSET(0x1044) /* Accelerator Configuration Register */ #define HD64461_GRCFGR_ACCSTATUS 0x10 /* Accelerator Status */ #define HD64461_GRCFGR_ACCRESET 0x08 /* Accelerator Reset */ @@ -97,41 +99,41 @@ #define HD64461_GRCFGR_COLORDEPTH8 0x01 /* Sets Colordepth 8 for Accelerator */ /* Line Drawing Registers */ -#define HD64461_LNSARH (CONFIG_HD64461_IOBASE + 0x1046) /* Line Start Address Register (H) */ -#define HD64461_LNSARL (CONFIG_HD64461_IOBASE + 0x1048) /* Line Start Address Register (L) */ -#define HD64461_LNAXLR (CONFIG_HD64461_IOBASE + 0x104a) /* Axis Pixel Length Register */ -#define HD64461_LNDGR (CONFIG_HD64461_IOBASE + 0x104c) /* Diagonal Register */ -#define HD64461_LNAXR (CONFIG_HD64461_IOBASE + 0x104e) /* Axial Register */ -#define HD64461_LNERTR (CONFIG_HD64461_IOBASE + 0x1050) /* Start Error Term Register */ -#define HD64461_LNMDR (CONFIG_HD64461_IOBASE + 0x1052) /* Line Mode Register */ +#define HD64461_LNSARH HD64461_IO_OFFSET(0x1046) /* Line Start Address Register (H) */ +#define HD64461_LNSARL HD64461_IO_OFFSET(0x1048) /* Line Start Address Register (L) */ +#define HD64461_LNAXLR HD64461_IO_OFFSET(0x104a) /* Axis Pixel Length Register */ +#define HD64461_LNDGR HD64461_IO_OFFSET(0x104c) /* Diagonal Register */ +#define HD64461_LNAXR HD64461_IO_OFFSET(0x104e) /* Axial Register */ +#define HD64461_LNERTR HD64461_IO_OFFSET(0x1050) /* Start Error Term Register */ +#define HD64461_LNMDR HD64461_IO_OFFSET(0x1052) /* Line Mode Register */ /* BitBLT Registers */ -#define HD64461_BBTSSARH (CONFIG_HD64461_IOBASE + 0x1054) /* Source Start Address Register (H) */ -#define HD64461_BBTSSARL (CONFIG_HD64461_IOBASE + 0x1056) /* Source Start Address Register (L) */ -#define HD64461_BBTDSARH (CONFIG_HD64461_IOBASE + 0x1058) /* Destination Start Address Register (H) */ -#define HD64461_BBTDSARL (CONFIG_HD64461_IOBASE + 0x105a) /* Destination Start Address Register (L) */ -#define HD64461_BBTDWR (CONFIG_HD64461_IOBASE + 0x105c) /* Destination Block Width Register */ -#define HD64461_BBTDHR (CONFIG_HD64461_IOBASE + 0x105e) /* Destination Block Height Register */ -#define HD64461_BBTPARH (CONFIG_HD64461_IOBASE + 0x1060) /* Pattern Start Address Register (H) */ -#define HD64461_BBTPARL (CONFIG_HD64461_IOBASE + 0x1062) /* Pattern Start Address Register (L) */ -#define HD64461_BBTMARH (CONFIG_HD64461_IOBASE + 0x1064) /* Mask Start Address Register (H) */ -#define HD64461_BBTMARL (CONFIG_HD64461_IOBASE + 0x1066) /* Mask Start Address Register (L) */ -#define HD64461_BBTROPR (CONFIG_HD64461_IOBASE + 0x1068) /* ROP Register */ -#define HD64461_BBTMDR (CONFIG_HD64461_IOBASE + 0x106a) /* BitBLT Mode Register */ +#define HD64461_BBTSSARH HD64461_IO_OFFSET(0x1054) /* Source Start Address Register (H) */ +#define HD64461_BBTSSARL HD64461_IO_OFFSET(0x1056) /* Source Start Address Register (L) */ +#define HD64461_BBTDSARH HD64461_IO_OFFSET(0x1058) /* Destination Start Address Register (H) */ +#define HD64461_BBTDSARL HD64461_IO_OFFSET(0x105a) /* Destination Start Address Register (L) */ +#define HD64461_BBTDWR HD64461_IO_OFFSET(0x105c) /* Destination Block Width Register */ +#define HD64461_BBTDHR HD64461_IO_OFFSET(0x105e) /* Destination Block Height Register */ +#define HD64461_BBTPARH HD64461_IO_OFFSET(0x1060) /* Pattern Start Address Register (H) */ +#define HD64461_BBTPARL HD64461_IO_OFFSET(0x1062) /* Pattern Start Address Register (L) */ +#define HD64461_BBTMARH HD64461_IO_OFFSET(0x1064) /* Mask Start Address Register (H) */ +#define HD64461_BBTMARL HD64461_IO_OFFSET(0x1066) /* Mask Start Address Register (L) */ +#define HD64461_BBTROPR HD64461_IO_OFFSET(0x1068) /* ROP Register */ +#define HD64461_BBTMDR HD64461_IO_OFFSET(0x106a) /* BitBLT Mode Register */ /* PC Card Controller Registers */ /* Maps to Physical Area 6 */ -#define HD64461_PCC0ISR (CONFIG_HD64461_IOBASE + 0x2000) /* socket 0 interface status */ -#define HD64461_PCC0GCR (CONFIG_HD64461_IOBASE + 0x2002) /* socket 0 general control */ -#define HD64461_PCC0CSCR (CONFIG_HD64461_IOBASE + 0x2004) /* socket 0 card status change */ -#define HD64461_PCC0CSCIER (CONFIG_HD64461_IOBASE + 0x2006) /* socket 0 card status change interrupt enable */ -#define HD64461_PCC0SCR (CONFIG_HD64461_IOBASE + 0x2008) /* socket 0 software control */ +#define HD64461_PCC0ISR HD64461_IO_OFFSET(0x2000) /* socket 0 interface status */ +#define HD64461_PCC0GCR HD64461_IO_OFFSET(0x2002) /* socket 0 general control */ +#define HD64461_PCC0CSCR HD64461_IO_OFFSET(0x2004) /* socket 0 card status change */ +#define HD64461_PCC0CSCIER HD64461_IO_OFFSET(0x2006) /* socket 0 card status change interrupt enable */ +#define HD64461_PCC0SCR HD64461_IO_OFFSET(0x2008) /* socket 0 software control */ /* Maps to Physical Area 5 */ -#define HD64461_PCC1ISR (CONFIG_HD64461_IOBASE + 0x2010) /* socket 1 interface status */ -#define HD64461_PCC1GCR (CONFIG_HD64461_IOBASE + 0x2012) /* socket 1 general control */ -#define HD64461_PCC1CSCR (CONFIG_HD64461_IOBASE + 0x2014) /* socket 1 card status change */ -#define HD64461_PCC1CSCIER (CONFIG_HD64461_IOBASE + 0x2016) /* socket 1 card status change interrupt enable */ -#define HD64461_PCC1SCR (CONFIG_HD64461_IOBASE + 0x2018) /* socket 1 software control */ +#define HD64461_PCC1ISR HD64461_IO_OFFSET(0x2010) /* socket 1 interface status */ +#define HD64461_PCC1GCR HD64461_IO_OFFSET(0x2012) /* socket 1 general control */ +#define HD64461_PCC1CSCR HD64461_IO_OFFSET(0x2014) /* socket 1 card status change */ +#define HD64461_PCC1CSCIER HD64461_IO_OFFSET(0x2016) /* socket 1 card status change interrupt enable */ +#define HD64461_PCC1SCR HD64461_IO_OFFSET(0x2018) /* socket 1 software control */ /* PCC Interface Status Register */ #define HD64461_PCCISR_READY 0x80 /* card ready */ @@ -189,41 +191,41 @@ #define HD64461_PCCSCR_SWP 0x01 /* write protect */ /* PCC0 Output Pins Control Register */ -#define HD64461_P0OCR (CONFIG_HD64461_IOBASE + 0x202a) +#define HD64461_P0OCR HD64461_IO_OFFSET(0x202a) /* PCC1 Output Pins Control Register */ -#define HD64461_P1OCR (CONFIG_HD64461_IOBASE + 0x202c) +#define HD64461_P1OCR HD64461_IO_OFFSET(0x202c) /* PC Card General Control Register */ -#define HD64461_PGCR (CONFIG_HD64461_IOBASE + 0x202e) +#define HD64461_PGCR HD64461_IO_OFFSET(0x202e) /* Port Control Registers */ -#define HD64461_GPACR (CONFIG_HD64461_IOBASE + 0x4000) /* Port A - Handles IRDA/TIMER */ -#define HD64461_GPBCR (CONFIG_HD64461_IOBASE + 0x4002) /* Port B - Handles UART */ -#define HD64461_GPCCR (CONFIG_HD64461_IOBASE + 0x4004) /* Port C - Handles PCMCIA 1 */ -#define HD64461_GPDCR (CONFIG_HD64461_IOBASE + 0x4006) /* Port D - Handles PCMCIA 1 */ +#define HD64461_GPACR HD64461_IO_OFFSET(0x4000) /* Port A - Handles IRDA/TIMER */ +#define HD64461_GPBCR HD64461_IO_OFFSET(0x4002) /* Port B - Handles UART */ +#define HD64461_GPCCR HD64461_IO_OFFSET(0x4004) /* Port C - Handles PCMCIA 1 */ +#define HD64461_GPDCR HD64461_IO_OFFSET(0x4006) /* Port D - Handles PCMCIA 1 */ /* Port Control Data Registers */ -#define HD64461_GPADR (CONFIG_HD64461_IOBASE + 0x4010) /* A */ -#define HD64461_GPBDR (CONFIG_HD64461_IOBASE + 0x4012) /* B */ -#define HD64461_GPCDR (CONFIG_HD64461_IOBASE + 0x4014) /* C */ -#define HD64461_GPDDR (CONFIG_HD64461_IOBASE + 0x4016) /* D */ +#define HD64461_GPADR HD64461_IO_OFFSET(0x4010) /* A */ +#define HD64461_GPBDR HD64461_IO_OFFSET(0x4012) /* B */ +#define HD64461_GPCDR HD64461_IO_OFFSET(0x4014) /* C */ +#define HD64461_GPDDR HD64461_IO_OFFSET(0x4016) /* D */ /* Interrupt Control Registers */ -#define HD64461_GPAICR (CONFIG_HD64461_IOBASE + 0x4020) /* A */ -#define HD64461_GPBICR (CONFIG_HD64461_IOBASE + 0x4022) /* B */ -#define HD64461_GPCICR (CONFIG_HD64461_IOBASE + 0x4024) /* C */ -#define HD64461_GPDICR (CONFIG_HD64461_IOBASE + 0x4026) /* D */ +#define HD64461_GPAICR HD64461_IO_OFFSET(0x4020) /* A */ +#define HD64461_GPBICR HD64461_IO_OFFSET(0x4022) /* B */ +#define HD64461_GPCICR HD64461_IO_OFFSET(0x4024) /* C */ +#define HD64461_GPDICR HD64461_IO_OFFSET(0x4026) /* D */ /* Interrupt Status Registers */ -#define HD64461_GPAISR (CONFIG_HD64461_IOBASE + 0x4040) /* A */ -#define HD64461_GPBISR (CONFIG_HD64461_IOBASE + 0x4042) /* B */ -#define HD64461_GPCISR (CONFIG_HD64461_IOBASE + 0x4044) /* C */ -#define HD64461_GPDISR (CONFIG_HD64461_IOBASE + 0x4046) /* D */ +#define HD64461_GPAISR HD64461_IO_OFFSET(0x4040) /* A */ +#define HD64461_GPBISR HD64461_IO_OFFSET(0x4042) /* B */ +#define HD64461_GPCISR HD64461_IO_OFFSET(0x4044) /* C */ +#define HD64461_GPDISR HD64461_IO_OFFSET(0x4046) /* D */ /* Interrupt Request Register & Interrupt Mask Register */ -#define HD64461_NIRR (CONFIG_HD64461_IOBASE + 0x5000) -#define HD64461_NIMR (CONFIG_HD64461_IOBASE + 0x5002) +#define HD64461_NIRR HD64461_IO_OFFSET(0x5000) +#define HD64461_NIMR HD64461_IO_OFFSET(0x5002) #define HD64461_IRQBASE OFFCHIP_IRQ_BASE #define OFFCHIP_IRQ_BASE 64 -- cgit v0.10.2 From 639138a991aaf1a3f65cc66700d097edc5f602fe Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Fri, 15 May 2009 12:07:17 +0900 Subject: sound: oss: sh_dac_audio timer fixes. This patch modifies sh_dac_audio in the following ways: - use high resolution timer instead of TMU1 - fix cpu/dac.h include - add future rewrite comment Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt diff --git a/sound/oss/Kconfig b/sound/oss/Kconfig index 1ca7427..bcf2a06 100644 --- a/sound/oss/Kconfig +++ b/sound/oss/Kconfig @@ -561,7 +561,7 @@ endif # SOUND_OSS config SOUND_SH_DAC_AUDIO tristate "SuperH DAC audio support" - depends on CPU_SH3 + depends on CPU_SH3 && HIGH_RES_TIMERS config SOUND_SH_DAC_AUDIO_CHANNEL int "DAC channel" diff --git a/sound/oss/sh_dac_audio.c b/sound/oss/sh_dac_audio.c index 78cfb66..b2ed875 100644 --- a/sound/oss/sh_dac_audio.c +++ b/sound/oss/sh_dac_audio.c @@ -18,47 +18,36 @@ #include #include #include +#include #include #include #include #include #include -#include -#include +#include #include #include #include #define MODNAME "sh_dac_audio" -#define TMU_TOCR_INIT 0x00 - -#define TMU1_TCR_INIT 0x0020 /* Clock/4, rising edge; interrupt on */ -#define TMU1_TSTR_INIT 0x02 /* Bit to turn on TMU1 */ - #define BUFFER_SIZE 48000 static int rate; static int empty; static char *data_buffer, *buffer_begin, *buffer_end; static int in_use, device_major; +static struct hrtimer hrtimer; +static ktime_t wakeups_per_second; static void dac_audio_start_timer(void) { - u8 tstr; - - tstr = ctrl_inb(TMU_TSTR); - tstr |= TMU1_TSTR_INIT; - ctrl_outb(tstr, TMU_TSTR); + hrtimer_start(&hrtimer, wakeups_per_second, HRTIMER_MODE_REL); } static void dac_audio_stop_timer(void) { - u8 tstr; - - tstr = ctrl_inb(TMU_TSTR); - tstr &= ~TMU1_TSTR_INIT; - ctrl_outb(tstr, TMU_TSTR); + hrtimer_cancel(&hrtimer); } static void dac_audio_reset(void) @@ -77,38 +66,30 @@ static void dac_audio_sync(void) static void dac_audio_start(void) { if (mach_is_hp6xx()) { - u16 v = inw(HD64461_GPADR); + u16 v = __raw_readw(HD64461_GPADR); v &= ~HD64461_GPADR_SPEAKER; - outw(v, HD64461_GPADR); + __raw_writew(v, HD64461_GPADR); } sh_dac_enable(CONFIG_SOUND_SH_DAC_AUDIO_CHANNEL); - ctrl_outw(TMU1_TCR_INIT, TMU1_TCR); } static void dac_audio_stop(void) { dac_audio_stop_timer(); if (mach_is_hp6xx()) { - u16 v = inw(HD64461_GPADR); + u16 v = __raw_readw(HD64461_GPADR); v |= HD64461_GPADR_SPEAKER; - outw(v, HD64461_GPADR); + __raw_writew(v, HD64461_GPADR); } - sh_dac_output(0, CONFIG_SOUND_SH_DAC_AUDIO_CHANNEL); + sh_dac_output(0, CONFIG_SOUND_SH_DAC_AUDIO_CHANNEL); sh_dac_disable(CONFIG_SOUND_SH_DAC_AUDIO_CHANNEL); } static void dac_audio_set_rate(void) { - unsigned long interval; - struct clk *clk; - - clk = clk_get(NULL, "module_clk"); - interval = (clk_get_rate(clk) / 4) / rate; - clk_put(clk); - ctrl_outl(interval, TMU1_TCOR); - ctrl_outl(interval, TMU1_TCNT); + wakeups_per_second = ktime_set(0, 1000000000 / rate); } static int dac_audio_ioctl(struct inode *inode, struct file *file, @@ -265,32 +246,26 @@ const struct file_operations dac_audio_fops = { .release = dac_audio_release, }; -static irqreturn_t timer1_interrupt(int irq, void *dev) +static enum hrtimer_restart sh_dac_audio_timer(struct hrtimer *handle) { - unsigned long timer_status; - - timer_status = ctrl_inw(TMU1_TCR); - timer_status &= ~0x100; - ctrl_outw(timer_status, TMU1_TCR); - if (!empty) { sh_dac_output(*buffer_begin, CONFIG_SOUND_SH_DAC_AUDIO_CHANNEL); buffer_begin++; if (buffer_begin == data_buffer + BUFFER_SIZE) buffer_begin = data_buffer; - if (buffer_begin == buffer_end) { + if (buffer_begin == buffer_end) empty = 1; - dac_audio_stop_timer(); - } } - return IRQ_HANDLED; + + if (!empty) + hrtimer_start(&hrtimer, wakeups_per_second, HRTIMER_MODE_REL); + + return HRTIMER_NORESTART; } static int __init dac_audio_init(void) { - int retval; - if ((device_major = register_sound_dsp(&dac_audio_fops, -1)) < 0) { printk(KERN_ERR "Cannot register dsp device"); return device_major; @@ -306,21 +281,25 @@ static int __init dac_audio_init(void) rate = 8000; dac_audio_set_rate(); - retval = - request_irq(TIMER1_IRQ, timer1_interrupt, IRQF_DISABLED, MODNAME, 0); - if (retval < 0) { - printk(KERN_ERR "sh_dac_audio: IRQ %d request failed\n", - TIMER1_IRQ); - return retval; - } + /* Today: High Resolution Timer driven DAC playback. + * The timer callback gets called once per sample. Ouch. + * + * Future: A much better approach would be to use the + * SH7720 CMT+DMAC+DAC hardware combination like this: + * - Program sample rate using CMT0 or CMT1 + * - Program DMAC to use CMT for timing and output to DAC + * - Play sound using DMAC, let CPU sleep. + * - While at it, rewrite this driver to use ALSA. + */ + + hrtimer_init(&hrtimer, CLOCK_MONOTONIC, HRTIMER_MODE_REL); + hrtimer.function = sh_dac_audio_timer; return 0; } static void __exit dac_audio_exit(void) { - free_irq(TIMER1_IRQ, 0); - unregister_sound_dsp(device_major); kfree((void *)data_buffer); } -- cgit v0.10.2 From 62669e61a5f559826b1d2e863649a6005eee629b Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Wed, 20 May 2009 11:27:13 +0900 Subject: sh: mach-hp6xx: Fix up the hp6xx build for hd64461 changes. Fixes several compile errors due to the recent hd64461 I/O base changes. Signed-off-by: Paul Mundt diff --git a/arch/sh/cchips/hd6446x/hd64461.c b/arch/sh/cchips/hd6446x/hd64461.c index 25ef910..50aa0c1 100644 --- a/arch/sh/cchips/hd6446x/hd64461.c +++ b/arch/sh/cchips/hd6446x/hd64461.c @@ -80,7 +80,7 @@ int __init setup_hd64461(void) printk(KERN_INFO "HD64461 configured at 0x%x on irq %d(mapped into %d to %d)\n", - CONFIG_HD64461_IOBASE, CONFIG_HD64461_IRQ, HD64461_IRQBASE, + HD64461_IOBASE, CONFIG_HD64461_IRQ, HD64461_IRQBASE, HD64461_IRQBASE + 15); /* Should be at processor specific part.. */ diff --git a/arch/sh/include/asm/hd64461.h b/arch/sh/include/asm/hd64461.h index c16d545..977355f 100644 --- a/arch/sh/include/asm/hd64461.h +++ b/arch/sh/include/asm/hd64461.h @@ -26,7 +26,7 @@ #define HD64461_PCC1_COMM (HD64461_PCC1_BASE+HD64461_PCC_WINDOW) /* 0xb5000000 */ /* Standby Control Register for HD64461 */ -#define HD64461_STBCR CONFIG_HD64461_IOBASE +#define HD64461_STBCR HD64461_IO_OFFSET(0x00000000) #define HD64461_STBCR_CKIO_STBY 0x2000 #define HD64461_STBCR_SAFECKE_IST 0x1000 #define HD64461_STBCR_SLCKE_IST 0x0800 diff --git a/drivers/video/hitfb.c b/drivers/video/hitfb.c index e6467cf..020db7f 100644 --- a/drivers/video/hitfb.c +++ b/drivers/video/hitfb.c @@ -335,9 +335,9 @@ static int __init hitfb_probe(struct platform_device *dev) if (fb_get_options("hitfb", NULL)) return -ENODEV; - hitfb_fix.mmio_start = CONFIG_HD64461_IOBASE+0x1000; + hitfb_fix.mmio_start = HD64461_IO_OFFSET(0x1000); hitfb_fix.mmio_len = 0x1000; - hitfb_fix.smem_start = CONFIG_HD64461_IOBASE + 0x02000000; + hitfb_fix.smem_start = HD64461_IO_OFFSET(0x02000000); hitfb_fix.smem_len = 512 * 1024; lcdclor = fb_readw(HD64461_LCDCLOR); -- cgit v0.10.2 From 55620c86ebc29013c0d26c5b3bc423faea299fee Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Fri, 22 May 2009 01:16:17 +0900 Subject: sh: irq: Rework the SR.IMASK bitmap handling. This tidies up how the SR.IMASK bitmap is managed, using the bitmap API directly instead. At the same time, tidy up the irq_chip conversion a bit. Signed-off-by: Paul Mundt diff --git a/arch/sh/kernel/cpu/irq/imask.c b/arch/sh/kernel/cpu/irq/imask.c index f43753b..3bef3c2 100644 --- a/arch/sh/kernel/cpu/irq/imask.c +++ b/arch/sh/kernel/cpu/irq/imask.c @@ -18,38 +18,17 @@ #include #include #include +#include #include #include /* Bitmap of IRQ masked */ -static unsigned long imask_mask = 0x7fff; -static int interrupt_priority = 0; - -static void enable_imask_irq(unsigned int irq); -static void disable_imask_irq(unsigned int irq); -static void shutdown_imask_irq(unsigned int irq); -static void mask_and_ack_imask(unsigned int); -static void end_imask_irq(unsigned int irq); - #define IMASK_PRIORITY 15 -static unsigned int startup_imask_irq(unsigned int irq) -{ - /* Nothing to do */ - return 0; /* never anything pending */ -} +static DECLARE_BITMAP(imask_mask, IMASK_PRIORITY); +static int interrupt_priority; -static struct irq_chip imask_irq_type = { - .typename = "SR.IMASK", - .startup = startup_imask_irq, - .shutdown = shutdown_imask_irq, - .enable = enable_imask_irq, - .disable = disable_imask_irq, - .ack = mask_and_ack_imask, - .end = end_imask_irq -}; - -void static inline set_interrupt_registers(int ip) +static inline void set_interrupt_registers(int ip) { unsigned long __dummy; @@ -72,42 +51,31 @@ void static inline set_interrupt_registers(int ip) : "t"); } -static void disable_imask_irq(unsigned int irq) +static void mask_imask_irq(unsigned int irq) { clear_bit(irq, &imask_mask); if (interrupt_priority < IMASK_PRIORITY - irq) interrupt_priority = IMASK_PRIORITY - irq; - set_interrupt_registers(interrupt_priority); } -static void enable_imask_irq(unsigned int irq) +static void unmask_imask_irq(unsigned int irq) { set_bit(irq, &imask_mask); - interrupt_priority = IMASK_PRIORITY - ffz(imask_mask); - + interrupt_priority = IMASK_PRIORITY - + find_first_zero_bit(imask_mask, IMASK_PRIORITY); set_interrupt_registers(interrupt_priority); } -static void mask_and_ack_imask(unsigned int irq) -{ - disable_imask_irq(irq); -} - -static void end_imask_irq(unsigned int irq) -{ - if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS))) - enable_imask_irq(irq); -} - -static void shutdown_imask_irq(unsigned int irq) -{ - /* Nothing to do */ -} +static struct irq_chip imask_irq_chip = { + .typename = "SR.IMASK", + .mask = mask_imask_irq, + .unmask = unmask_imask_irq, + .mask_ack = mask_imask_irq, +}; void make_imask_irq(unsigned int irq) { - disable_irq_nosync(irq); - irq_desc[irq].chip = &imask_irq_type; - enable_irq(irq); + set_irq_chip_and_handler_name(irq, &imask_irq_chip, + handle_level_irq, "level"); } -- cgit v0.10.2 From fa1d43ab451084785153d37ae559c4fdd1546a5b Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Fri, 22 May 2009 01:26:16 +0900 Subject: sh: irq: Convert from irq_desc[] to irq_to_desc(). This converts a few places that were using the old irq_desc[] array over to the shiny new irq_to_desc() helper. Preperatory work for sparse irq support. Signed-off-by: Paul Mundt diff --git a/arch/sh/kernel/cpu/irq/intc-sh5.c b/arch/sh/kernel/cpu/irq/intc-sh5.c index a619eaf..6c092f1 100644 --- a/arch/sh/kernel/cpu/irq/intc-sh5.c +++ b/arch/sh/kernel/cpu/irq/intc-sh5.c @@ -152,14 +152,6 @@ static void end_intc_irq(unsigned int irq) enable_intc_irq(irq); } -/* For future use, if we ever support IRLM=0) */ -void make_intc_irq(unsigned int irq) -{ - disable_irq_nosync(irq); - irq_desc[irq].chip = &intc_irq_type; - disable_intc_irq(irq); -} - void __init plat_irq_setup(void) { unsigned long long __dummy0, __dummy1=~0x00000000100000f0; @@ -174,7 +166,7 @@ void __init plat_irq_setup(void) /* Set default: per-line enable/disable, priority driven ack/eoi */ for (i = 0; i < NR_INTC_IRQS; i++) - irq_desc[i].chip = &intc_irq_type; + set_irq_chip_and_handler(i, &intc_irq_type, handle_level_irq); /* Disable all interrupts and set all priorities to 0 to avoid trouble */ diff --git a/arch/sh/kernel/irq.c b/arch/sh/kernel/irq.c index 3f1372e..878532b 100644 --- a/arch/sh/kernel/irq.c +++ b/arch/sh/kernel/irq.c @@ -31,39 +31,64 @@ void ack_bad_irq(unsigned int irq) } #if defined(CONFIG_PROC_FS) +/* + * /proc/interrupts printing: + */ +static int show_other_interrupts(struct seq_file *p, int prec) +{ + seq_printf(p, "%*s: %10u\n", prec, "ERR", atomic_read(&irq_err_count)); + return 0; +} + int show_interrupts(struct seq_file *p, void *v) { - int i = *(loff_t *) v, j; - struct irqaction * action; - unsigned long flags; + unsigned long flags, any_count = 0; + int i = *(loff_t *)v, j, prec; + struct irqaction *action; + struct irq_desc *desc; + + if (i > nr_irqs) + return 0; + + for (prec = 3, j = 1000; prec < 10 && j <= nr_irqs; ++prec) + j *= 10; + + if (i == nr_irqs) + return show_other_interrupts(p, prec); if (i == 0) { - seq_puts(p, " "); + seq_printf(p, "%*s", prec + 8, ""); for_each_online_cpu(j) - seq_printf(p, "CPU%d ",j); + seq_printf(p, "CPU%-8d", j); seq_putc(p, '\n'); } - if (i < sh_mv.mv_nr_irqs) { - spin_lock_irqsave(&irq_desc[i].lock, flags); - action = irq_desc[i].action; - if (!action) - goto unlock; - seq_printf(p, "%3d: ",i); - for_each_online_cpu(j) - seq_printf(p, "%10u ", kstat_irqs_cpu(i, j)); - seq_printf(p, " %14s", irq_desc[i].chip->name); - seq_printf(p, "-%-8s", irq_desc[i].name); - seq_printf(p, " %s", action->name); + desc = irq_to_desc(i); + if (!desc) + return 0; + + spin_lock_irqsave(&desc->lock, flags); + for_each_online_cpu(j) + any_count |= kstat_irqs_cpu(i, j); + action = desc->action; + if (!action && !any_count) + goto out; - for (action=action->next; action; action = action->next) + seq_printf(p, "%*d: ", prec, i); + for_each_online_cpu(j) + seq_printf(p, "%10u ", kstat_irqs_cpu(i, j)); + seq_printf(p, " %14s", desc->chip->name); + seq_printf(p, "-%-8s", desc->name); + + if (action) { + seq_printf(p, " %s", action->name); + while ((action = action->next) != NULL) seq_printf(p, ", %s", action->name); - seq_putc(p, '\n'); -unlock: - spin_unlock_irqrestore(&irq_desc[i].lock, flags); - } else if (i == sh_mv.mv_nr_irqs) - seq_printf(p, "Err: %10u\n", atomic_read(&irq_err_count)); + } + seq_putc(p, '\n'); +out: + spin_unlock_irqrestore(&desc->lock, flags); return 0; } #endif diff --git a/arch/sh/kernel/sh_ksyms_32.c b/arch/sh/kernel/sh_ksyms_32.c index 2d868c6..fcc5de3 100644 --- a/arch/sh/kernel/sh_ksyms_32.c +++ b/arch/sh/kernel/sh_ksyms_32.c @@ -23,9 +23,6 @@ extern int dump_fpu(struct pt_regs *, elf_fpregset_t *); /* platform dependent support */ EXPORT_SYMBOL(dump_fpu); EXPORT_SYMBOL(kernel_thread); -EXPORT_SYMBOL(irq_desc); -EXPORT_SYMBOL(no_irq_chip); - EXPORT_SYMBOL(strlen); /* PCI exports */ @@ -40,11 +37,6 @@ EXPORT_SYMBOL(memcpy); EXPORT_SYMBOL(memset); EXPORT_SYMBOL(memmove); EXPORT_SYMBOL(__copy_user); - -#ifdef CONFIG_MMU -EXPORT_SYMBOL(get_vm_area); -#endif - EXPORT_SYMBOL(__udelay); EXPORT_SYMBOL(__ndelay); EXPORT_SYMBOL(__const_udelay); -- cgit v0.10.2 From 05ff3004d278b54760abd71530506d803182c71d Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Fri, 22 May 2009 01:28:33 +0900 Subject: sh: irq: Teach ipr and intc about dynamically allocating irq_descs. This hooks in irq_to_desc_alloc_cpu() to the necessary code paths in the intc and ipr controller registration paths. As these are the primary call paths for all SH CPUs, this alone will make all CPUs sparse IRQ ready. There is the added benefit now that each CPU contains specific IPR and INTC tables, so only the vectors with interrupt sources backing them will ever see an irq_desc instantiation. This effectively packs irq_desc down to match the CPU, rather than padding NR_IRQS out to cover the valid vector range. Boards with extra sources will still have to fiddle with the nr_irqs setting, but they can continue doing so through the machvec as before. Signed-off-by: Paul Mundt diff --git a/arch/sh/kernel/cpu/irq/ipr.c b/arch/sh/kernel/cpu/irq/ipr.c index 3eb17ee..fa0c846 100644 --- a/arch/sh/kernel/cpu/irq/ipr.c +++ b/arch/sh/kernel/cpu/irq/ipr.c @@ -59,10 +59,18 @@ void register_ipr_controller(struct ipr_desc *desc) for (i = 0; i < desc->nr_irqs; i++) { struct ipr_data *p = desc->ipr_data + i; + struct irq_desc *irq_desc; BUG_ON(p->ipr_idx >= desc->nr_offsets); BUG_ON(!desc->ipr_offsets[p->ipr_idx]); + irq_desc = irq_to_desc_alloc_cpu(p->irq, smp_processor_id()); + if (unlikely(!irq_desc)) { + printk(KERN_INFO "can not get irq_desc for %d\n", + p->irq); + continue; + } + disable_irq_nosync(p->irq); set_irq_chip_and_handler_name(p->irq, &desc->chip, handle_level_irq, "level"); diff --git a/drivers/sh/intc.c b/drivers/sh/intc.c index 12d13d9..098b767 100644 --- a/drivers/sh/intc.c +++ b/drivers/sh/intc.c @@ -671,7 +671,7 @@ unsigned int intc_evt2irq(unsigned int vector) void __init register_intc_controller(struct intc_desc *desc) { - unsigned int i, k, smp; + unsigned int i, k, smp, cpu = smp_processor_id(); struct intc_desc_int *d; d = alloc_bootmem(sizeof(*d)); @@ -770,11 +770,19 @@ void __init register_intc_controller(struct intc_desc *desc) /* register the vectors one by one */ for (i = 0; i < desc->nr_vectors; i++) { struct intc_vect *vect = desc->vectors + i; + unsigned int irq = evt2irq(vect->vect); + struct irq_desc *irq_desc; if (!vect->enum_id) continue; - intc_register_irq(desc, d, vect->enum_id, evt2irq(vect->vect)); + irq_desc = irq_to_desc_alloc_cpu(irq, cpu); + if (unlikely(!irq_desc)) { + printk(KERN_INFO "can not get irq_desc for %d\n", irq); + continue; + } + + intc_register_irq(desc, d, vect->enum_id, irq); } } -- cgit v0.10.2 From d8586ba6e1415150e1bab89f0a05447bb6f2d6d5 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Fri, 22 May 2009 01:36:13 +0900 Subject: sh: irq: Provide an arch_probe_nr_irqs() that wraps the machvec def. This is just a simple arch_probe_nr_irqs() stub that wraps to the platform defined number of IRQs. This can be made gradually more intelligent based on what we can infer from the INTC tables and so on. Signed-off-by: Paul Mundt diff --git a/arch/sh/kernel/irq.c b/arch/sh/kernel/irq.c index 878532b..3d09062 100644 --- a/arch/sh/kernel/irq.c +++ b/arch/sh/kernel/irq.c @@ -279,3 +279,11 @@ void __init init_IRQ(void) irq_ctx_init(smp_processor_id()); } + +#ifdef CONFIG_SPARSE_IRQ +int __init arch_probe_nr_irqs(void) +{ + nr_irqs = sh_mv.mv_nr_irqs; + return 0; +} +#endif -- cgit v0.10.2