From 6241f22ca12a26ee149cbe31b27bac97dbdc8bc4 Mon Sep 17 00:00:00 2001 From: Sreekanth Reddy Date: Sat, 2 Feb 2013 00:56:18 +0530 Subject: [SCSI] mpt2sas: Fix for device scan following host reset could get stuck in a infinite loop Modified device scan routine so each configuration page read breaks from the while loop when the ioc_status is not equal to MPI2_IOCSTATUS_SUCCESS. [jejb: checkpatch fixes] Signed-off-by: Sreekanth Reddy Cc: stable@vger.kernel.org Signed-off-by: James Bottomley diff --git a/drivers/scsi/mpt2sas/mpt2sas_scsih.c b/drivers/scsi/mpt2sas/mpt2sas_scsih.c index 116e201..01dfbab 100644 --- a/drivers/scsi/mpt2sas/mpt2sas_scsih.c +++ b/drivers/scsi/mpt2sas/mpt2sas_scsih.c @@ -7097,12 +7097,15 @@ _scsih_scan_for_devices_after_reset(struct MPT2SAS_ADAPTER *ioc) struct _sas_device *sas_device; struct _sas_node *expander_device; static struct _raid_device *raid_device; + u8 retry_count; unsigned long flags; printk(MPT2SAS_INFO_FMT "scan devices: start\n", ioc->name); _scsih_sas_host_refresh(ioc); + printk(MPT2SAS_INFO_FMT "\tscan devices: expanders start\n", + ioc->name); /* expanders */ handle = 0xFFFF; while (!(mpt2sas_config_get_expander_pg0(ioc, &mpi_reply, &expander_pg0, @@ -7111,6 +7114,13 @@ _scsih_scan_for_devices_after_reset(struct MPT2SAS_ADAPTER *ioc) MPI2_IOCSTATUS_MASK; if (ioc_status == MPI2_IOCSTATUS_CONFIG_INVALID_PAGE) break; + if (ioc_status != MPI2_IOCSTATUS_SUCCESS) { + printk(MPT2SAS_INFO_FMT "\tbreak from expander scan: " + "ioc_status(0x%04x), loginfo(0x%08x)\n", + ioc->name, ioc_status, + le32_to_cpu(mpi_reply.IOCLogInfo)); + break; + } handle = le16_to_cpu(expander_pg0.DevHandle); spin_lock_irqsave(&ioc->sas_node_lock, flags); expander_device = mpt2sas_scsih_expander_find_by_sas_address( @@ -7119,13 +7129,26 @@ _scsih_scan_for_devices_after_reset(struct MPT2SAS_ADAPTER *ioc) if (expander_device) _scsih_refresh_expander_links(ioc, expander_device, handle); - else + else { + printk(MPT2SAS_INFO_FMT "\tBEFORE adding expander: " + "handle (0x%04x), sas_addr(0x%016llx)\n", + ioc->name, handle, (unsigned long long) + le64_to_cpu(expander_pg0.SASAddress)); _scsih_expander_add(ioc, handle); + printk(MPT2SAS_INFO_FMT "\tAFTER adding expander: " + "handle (0x%04x), sas_addr(0x%016llx)\n", + ioc->name, handle, (unsigned long long) + le64_to_cpu(expander_pg0.SASAddress)); + } } + printk(MPT2SAS_INFO_FMT "\tscan devices: expanders complete\n", + ioc->name); + if (!ioc->ir_firmware) goto skip_to_sas; + printk(MPT2SAS_INFO_FMT "\tscan devices phys disk start\n", ioc->name); /* phys disk */ phys_disk_num = 0xFF; while (!(mpt2sas_config_get_phys_disk_pg0(ioc, &mpi_reply, @@ -7135,6 +7158,13 @@ _scsih_scan_for_devices_after_reset(struct MPT2SAS_ADAPTER *ioc) MPI2_IOCSTATUS_MASK; if (ioc_status == MPI2_IOCSTATUS_CONFIG_INVALID_PAGE) break; + if (ioc_status != MPI2_IOCSTATUS_SUCCESS) { + printk(MPT2SAS_INFO_FMT "\tbreak from phys disk scan:" + "ioc_status(0x%04x), loginfo(0x%08x)\n", + ioc->name, ioc_status, + le32_to_cpu(mpi_reply.IOCLogInfo)); + break; + } phys_disk_num = pd_pg0.PhysDiskNum; handle = le16_to_cpu(pd_pg0.DevHandle); spin_lock_irqsave(&ioc->sas_device_lock, flags); @@ -7146,17 +7176,46 @@ _scsih_scan_for_devices_after_reset(struct MPT2SAS_ADAPTER *ioc) &sas_device_pg0, MPI2_SAS_DEVICE_PGAD_FORM_HANDLE, handle) != 0) continue; + ioc_status = le16_to_cpu(mpi_reply.IOCStatus) & + MPI2_IOCSTATUS_MASK; + if (ioc_status != MPI2_IOCSTATUS_SUCCESS) { + printk(MPT2SAS_INFO_FMT "\tbreak from phys disk scan " + "ioc_status(0x%04x), loginfo(0x%08x)\n", + ioc->name, ioc_status, + le32_to_cpu(mpi_reply.IOCLogInfo)); + break; + } parent_handle = le16_to_cpu(sas_device_pg0.ParentDevHandle); if (!_scsih_get_sas_address(ioc, parent_handle, &sas_address)) { + printk(MPT2SAS_INFO_FMT "\tBEFORE adding phys disk: " + " handle (0x%04x), sas_addr(0x%016llx)\n", + ioc->name, handle, (unsigned long long) + le64_to_cpu(sas_device_pg0.SASAddress)); mpt2sas_transport_update_links(ioc, sas_address, handle, sas_device_pg0.PhyNum, MPI2_SAS_NEG_LINK_RATE_1_5); set_bit(handle, ioc->pd_handles); - _scsih_add_device(ioc, handle, 0, 1); + retry_count = 0; + /* This will retry adding the end device. + * _scsih_add_device() will decide on retries and + * return "1" when it should be retried + */ + while (_scsih_add_device(ioc, handle, retry_count++, + 1)) { + ssleep(1); + } + printk(MPT2SAS_INFO_FMT "\tAFTER adding phys disk: " + " handle (0x%04x), sas_addr(0x%016llx)\n", + ioc->name, handle, (unsigned long long) + le64_to_cpu(sas_device_pg0.SASAddress)); } } + printk(MPT2SAS_INFO_FMT "\tscan devices: phys disk complete\n", + ioc->name); + + printk(MPT2SAS_INFO_FMT "\tscan devices: volumes start\n", ioc->name); /* volumes */ handle = 0xFFFF; while (!(mpt2sas_config_get_raid_volume_pg1(ioc, &mpi_reply, @@ -7165,6 +7224,13 @@ _scsih_scan_for_devices_after_reset(struct MPT2SAS_ADAPTER *ioc) MPI2_IOCSTATUS_MASK; if (ioc_status == MPI2_IOCSTATUS_CONFIG_INVALID_PAGE) break; + if (ioc_status != MPI2_IOCSTATUS_SUCCESS) { + printk(MPT2SAS_INFO_FMT "\tbreak from volume scan: " + "ioc_status(0x%04x), loginfo(0x%08x)\n", + ioc->name, ioc_status, + le32_to_cpu(mpi_reply.IOCLogInfo)); + break; + } handle = le16_to_cpu(volume_pg1.DevHandle); spin_lock_irqsave(&ioc->raid_device_lock, flags); raid_device = _scsih_raid_device_find_by_wwid(ioc, @@ -7176,18 +7242,38 @@ _scsih_scan_for_devices_after_reset(struct MPT2SAS_ADAPTER *ioc) &volume_pg0, MPI2_RAID_VOLUME_PGAD_FORM_HANDLE, handle, sizeof(Mpi2RaidVolPage0_t))) continue; + ioc_status = le16_to_cpu(mpi_reply.IOCStatus) & + MPI2_IOCSTATUS_MASK; + if (ioc_status != MPI2_IOCSTATUS_SUCCESS) { + printk(MPT2SAS_INFO_FMT "\tbreak from volume scan: " + "ioc_status(0x%04x), loginfo(0x%08x)\n", + ioc->name, ioc_status, + le32_to_cpu(mpi_reply.IOCLogInfo)); + break; + } if (volume_pg0.VolumeState == MPI2_RAID_VOL_STATE_OPTIMAL || volume_pg0.VolumeState == MPI2_RAID_VOL_STATE_ONLINE || volume_pg0.VolumeState == MPI2_RAID_VOL_STATE_DEGRADED) { memset(&element, 0, sizeof(Mpi2EventIrConfigElement_t)); element.ReasonCode = MPI2_EVENT_IR_CHANGE_RC_ADDED; element.VolDevHandle = volume_pg1.DevHandle; + printk(MPT2SAS_INFO_FMT "\tBEFORE adding volume: " + " handle (0x%04x)\n", ioc->name, + volume_pg1.DevHandle); _scsih_sas_volume_add(ioc, &element); + printk(MPT2SAS_INFO_FMT "\tAFTER adding volume: " + " handle (0x%04x)\n", ioc->name, + volume_pg1.DevHandle); } } + printk(MPT2SAS_INFO_FMT "\tscan devices: volumes complete\n", + ioc->name); + skip_to_sas: + printk(MPT2SAS_INFO_FMT "\tscan devices: end devices start\n", + ioc->name); /* sas devices */ handle = 0xFFFF; while (!(mpt2sas_config_get_sas_device_pg0(ioc, &mpi_reply, @@ -7197,6 +7283,13 @@ _scsih_scan_for_devices_after_reset(struct MPT2SAS_ADAPTER *ioc) MPI2_IOCSTATUS_MASK; if (ioc_status == MPI2_IOCSTATUS_CONFIG_INVALID_PAGE) break; + if (ioc_status != MPI2_IOCSTATUS_SUCCESS) { + printk(MPT2SAS_INFO_FMT "\tbreak from end device scan:" + " ioc_status(0x%04x), loginfo(0x%08x)\n", + ioc->name, ioc_status, + le32_to_cpu(mpi_reply.IOCLogInfo)); + break; + } handle = le16_to_cpu(sas_device_pg0.DevHandle); if (!(_scsih_is_end_device( le32_to_cpu(sas_device_pg0.DeviceInfo)))) @@ -7209,12 +7302,31 @@ _scsih_scan_for_devices_after_reset(struct MPT2SAS_ADAPTER *ioc) continue; parent_handle = le16_to_cpu(sas_device_pg0.ParentDevHandle); if (!_scsih_get_sas_address(ioc, parent_handle, &sas_address)) { + printk(MPT2SAS_INFO_FMT "\tBEFORE adding end device: " + "handle (0x%04x), sas_addr(0x%016llx)\n", + ioc->name, handle, (unsigned long long) + le64_to_cpu(sas_device_pg0.SASAddress)); mpt2sas_transport_update_links(ioc, sas_address, handle, sas_device_pg0.PhyNum, MPI2_SAS_NEG_LINK_RATE_1_5); - _scsih_add_device(ioc, handle, 0, 0); + retry_count = 0; + /* This will retry adding the end device. + * _scsih_add_device() will decide on retries and + * return "1" when it should be retried + */ + while (_scsih_add_device(ioc, handle, retry_count++, + 0)) { + ssleep(1); + } + printk(MPT2SAS_INFO_FMT "\tAFTER adding end device: " + "handle (0x%04x), sas_addr(0x%016llx)\n", + ioc->name, handle, (unsigned long long) + le64_to_cpu(sas_device_pg0.SASAddress)); } } + printk(MPT2SAS_INFO_FMT "\tscan devices: end devices complete\n", + ioc->name); + printk(MPT2SAS_INFO_FMT "scan devices: complete\n", ioc->name); } @@ -8076,8 +8188,8 @@ _scsih_probe(struct pci_dev *pdev, const struct pci_device_id *id) if (max_sectors != 0xFFFF) { if (max_sectors < 64) { shost->max_sectors = 64; - printk(MPT2SAS_WARN_FMT "Invalid value %d passed "\ - "for max_sectors, range is 64 to 32767. Assigning "\ + printk(MPT2SAS_WARN_FMT "Invalid value %d passed " + "for max_sectors, range is 64 to 32767. Assigning " "value of 64.\n", ioc->name, max_sectors); } else if (max_sectors > 32767) { shost->max_sectors = 32767; -- cgit v0.10.2