From 881a256d84e658d14ca1c162fe56e9cbbb1cdd49 Mon Sep 17 00:00:00 2001 From: Matthew Wilcox Date: Wed, 31 Dec 2008 13:12:46 -0500 Subject: [SCSI] Add VPD helper Based on prior work by Martin Petersen and James Bottomley, this patch adds a generic helper for retrieving VPD pages from SCSI devices. Signed-off-by: Matthew Wilcox Signed-off-by: James Bottomley diff --git a/drivers/scsi/scsi.c b/drivers/scsi/scsi.c index cbcd3f6..a2ef032 100644 --- a/drivers/scsi/scsi.c +++ b/drivers/scsi/scsi.c @@ -967,6 +967,110 @@ int scsi_track_queue_full(struct scsi_device *sdev, int depth) EXPORT_SYMBOL(scsi_track_queue_full); /** + * scsi_vpd_inquiry - Request a device provide us with a VPD page + * @sdev: The device to ask + * @buffer: Where to put the result + * @page: Which Vital Product Data to return + * @len: The length of the buffer + * + * This is an internal helper function. You probably want to use + * scsi_get_vpd_page instead. + * + * Returns 0 on success or a negative error number. + */ +static int scsi_vpd_inquiry(struct scsi_device *sdev, unsigned char *buffer, + u8 page, unsigned len) +{ + int result; + unsigned char cmd[16]; + + cmd[0] = INQUIRY; + cmd[1] = 1; /* EVPD */ + cmd[2] = page; + cmd[3] = len >> 8; + cmd[4] = len & 0xff; + cmd[5] = 0; /* Control byte */ + + /* + * I'm not convinced we need to try quite this hard to get VPD, but + * all the existing users tried this hard. + */ + result = scsi_execute_req(sdev, cmd, DMA_FROM_DEVICE, buffer, + len + 4, NULL, 30 * HZ, 3, NULL); + if (result) + return result; + + /* Sanity check that we got the page back that we asked for */ + if (buffer[1] != page) + return -EIO; + + return 0; +} + +/** + * scsi_get_vpd_page - Get Vital Product Data from a SCSI device + * @sdev: The device to ask + * @page: Which Vital Product Data to return + * + * SCSI devices may optionally supply Vital Product Data. Each 'page' + * of VPD is defined in the appropriate SCSI document (eg SPC, SBC). + * If the device supports this VPD page, this routine returns a pointer + * to a buffer containing the data from that page. The caller is + * responsible for calling kfree() on this pointer when it is no longer + * needed. If we cannot retrieve the VPD page this routine returns %NULL. + */ +unsigned char *scsi_get_vpd_page(struct scsi_device *sdev, u8 page) +{ + int i, result; + unsigned int len; + unsigned char *buf = kmalloc(259, GFP_KERNEL); + + if (!buf) + return NULL; + + /* Ask for all the pages supported by this device */ + result = scsi_vpd_inquiry(sdev, buf, 0, 255); + if (result) + goto fail; + + /* If the user actually wanted this page, we can skip the rest */ + if (page == 0) + return buf; + + for (i = 0; i < buf[3]; i++) + if (buf[i + 4] == page) + goto found; + /* The device claims it doesn't support the requested page */ + goto fail; + + found: + result = scsi_vpd_inquiry(sdev, buf, page, 255); + if (result) + goto fail; + + /* + * Some pages are longer than 255 bytes. The actual length of + * the page is returned in the header. + */ + len = (buf[2] << 8) | buf[3]; + if (len <= 255) + return buf; + + kfree(buf); + buf = kmalloc(len + 4, GFP_KERNEL); + result = scsi_vpd_inquiry(sdev, buf, page, len); + if (result) + goto fail; + + return buf; + + fail: + kfree(buf); + return NULL; +} +EXPORT_SYMBOL_GPL(scsi_get_vpd_page); + +/** * scsi_device_get - get an additional reference to a scsi_device * @sdev: device to get a reference to * diff --git a/include/scsi/scsi_device.h b/include/scsi/scsi_device.h index 01a4c58..9576690 100644 --- a/include/scsi/scsi_device.h +++ b/include/scsi/scsi_device.h @@ -340,6 +340,7 @@ extern int scsi_mode_select(struct scsi_device *sdev, int pf, int sp, struct scsi_sense_hdr *); extern int scsi_test_unit_ready(struct scsi_device *sdev, int timeout, int retries, struct scsi_sense_hdr *sshdr); +extern unsigned char *scsi_get_vpd_page(struct scsi_device *, u8 page); extern int scsi_device_set_state(struct scsi_device *sdev, enum scsi_device_state state); extern struct scsi_event *sdev_evt_alloc(enum scsi_device_event evt_type, -- cgit v0.10.2 From 40c3460f3cad1672f22baadcdbe20b9b3200cc20 Mon Sep 17 00:00:00 2001 From: Matthew Wilcox Date: Wed, 31 Dec 2008 12:11:17 -0700 Subject: [SCSI] ses: Use new scsi VPD helper SES had its own code to retrieve VPD from devices; convert it to use the new scsi_get_vpd_page helper. Signed-off-by: Matthew Wilcox Signed-off-by: James Bottomley diff --git a/drivers/scsi/ses.c b/drivers/scsi/ses.c index e946e05..f2cf952 100644 --- a/drivers/scsi/ses.c +++ b/drivers/scsi/ses.c @@ -345,44 +345,21 @@ static int ses_enclosure_find_by_addr(struct enclosure_device *edev, return 0; } -#define VPD_INQUIRY_SIZE 36 - static void ses_match_to_enclosure(struct enclosure_device *edev, struct scsi_device *sdev) { - unsigned char *buf = kmalloc(VPD_INQUIRY_SIZE, GFP_KERNEL); + unsigned char *buf; unsigned char *desc; - u16 vpd_len; + unsigned int vpd_len; struct efd efd = { .addr = 0, }; - unsigned char cmd[] = { - INQUIRY, - 1, - 0x83, - VPD_INQUIRY_SIZE >> 8, - VPD_INQUIRY_SIZE & 0xff, - 0 - }; + buf = scsi_get_vpd_page(sdev, 0x83); if (!buf) return; - if (scsi_execute_req(sdev, cmd, DMA_FROM_DEVICE, buf, - VPD_INQUIRY_SIZE, NULL, SES_TIMEOUT, SES_RETRIES, - NULL)) - goto free; - - vpd_len = (buf[2] << 8) + buf[3]; - kfree(buf); - buf = kmalloc(vpd_len, GFP_KERNEL); - if (!buf) - return; - cmd[3] = vpd_len >> 8; - cmd[4] = vpd_len & 0xff; - if (scsi_execute_req(sdev, cmd, DMA_FROM_DEVICE, buf, - vpd_len, NULL, SES_TIMEOUT, SES_RETRIES, NULL)) - goto free; + vpd_len = ((buf[2] << 8) | buf[3]) + 4; desc = buf + 4; while (desc < buf + vpd_len) { -- cgit v0.10.2 From 59d3270326fcba29226c28df27cb43fefd8c58d0 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Fri, 9 Jan 2009 15:28:13 -0800 Subject: [SCSI] scsi_sysfs: delete extra kernel-doc Warning(linux-2.6.28-git13//drivers/scsi/scsi_sysfs.c:1049): Excess function parameter 'dev' description in 'scsi_sysfs_add_host' Signed-off-by: Randy Dunlap Signed-off-by: James Bottomley diff --git a/drivers/scsi/scsi_sysfs.c b/drivers/scsi/scsi_sysfs.c index da63802..fa4711d 100644 --- a/drivers/scsi/scsi_sysfs.c +++ b/drivers/scsi/scsi_sysfs.c @@ -1043,7 +1043,6 @@ EXPORT_SYMBOL(scsi_register_interface); /** * scsi_sysfs_add_host - add scsi host to subsystem * @shost: scsi host struct to add to subsystem - * @dev: parent struct device pointer **/ int scsi_sysfs_add_host(struct Scsi_Host *shost) { -- cgit v0.10.2 From c6a44287417de1625a59f1d4ae52d033c03b9dab Mon Sep 17 00:00:00 2001 From: "Martin K. Petersen" Date: Sun, 4 Jan 2009 03:08:19 -0500 Subject: [SCSI] scsi_debug: DIF/DIX support This patch adds support for DIX and DIF in scsi_debug. A separate buffer is allocated for the protection information. - The dix parameter indicates whether the controller supports DIX (protection information DMA) - The dif parameter indicates whether the simulated storage device supports DIF - The guard parameter switches between T10 CRC(0) and IP checksum(1) - The ato parameter indicates whether the application tag is owned by the disk(0) or the OS(1) - DIF and DIX errors can be triggered using the scsi_debug_opts mask Signed-off-by: Martin K. Petersen Acked-by: Douglas Gilbert Signed-off-by: James Bottomley diff --git a/drivers/scsi/scsi_debug.c b/drivers/scsi/scsi_debug.c index 6eebd0b..213123b 100644 --- a/drivers/scsi/scsi_debug.c +++ b/drivers/scsi/scsi_debug.c @@ -40,6 +40,9 @@ #include #include #include +#include + +#include #include #include @@ -48,8 +51,7 @@ #include #include -#include - +#include "sd.h" #include "scsi_logging.h" #define SCSI_DEBUG_VERSION "1.81" @@ -95,6 +97,10 @@ static const char * scsi_debug_version_date = "20070104"; #define DEF_FAKE_RW 0 #define DEF_VPD_USE_HOSTNO 1 #define DEF_SECTOR_SIZE 512 +#define DEF_DIX 0 +#define DEF_DIF 0 +#define DEF_GUARD 0 +#define DEF_ATO 1 /* bit mask values for scsi_debug_opts */ #define SCSI_DEBUG_OPT_NOISE 1 @@ -102,6 +108,8 @@ static const char * scsi_debug_version_date = "20070104"; #define SCSI_DEBUG_OPT_TIMEOUT 4 #define SCSI_DEBUG_OPT_RECOVERED_ERR 8 #define SCSI_DEBUG_OPT_TRANSPORT_ERR 16 +#define SCSI_DEBUG_OPT_DIF_ERR 32 +#define SCSI_DEBUG_OPT_DIX_ERR 64 /* When "every_nth" > 0 then modulo "every_nth" commands: * - a no response is simulated if SCSI_DEBUG_OPT_TIMEOUT is set * - a RECOVERED_ERROR is simulated on successful read and write @@ -144,6 +152,10 @@ static int scsi_debug_virtual_gb = DEF_VIRTUAL_GB; static int scsi_debug_fake_rw = DEF_FAKE_RW; static int scsi_debug_vpd_use_hostno = DEF_VPD_USE_HOSTNO; static int scsi_debug_sector_size = DEF_SECTOR_SIZE; +static int scsi_debug_dix = DEF_DIX; +static int scsi_debug_dif = DEF_DIF; +static int scsi_debug_guard = DEF_GUARD; +static int scsi_debug_ato = DEF_ATO; static int scsi_debug_cmnd_count = 0; @@ -204,11 +216,15 @@ struct sdebug_queued_cmd { static struct sdebug_queued_cmd queued_arr[SCSI_DEBUG_CANQUEUE]; static unsigned char * fake_storep; /* ramdisk storage */ +static unsigned char *dif_storep; /* protection info */ static int num_aborts = 0; static int num_dev_resets = 0; static int num_bus_resets = 0; static int num_host_resets = 0; +static int dix_writes; +static int dix_reads; +static int dif_errors; static DEFINE_SPINLOCK(queued_arr_lock); static DEFINE_RWLOCK(atomic_rw); @@ -217,6 +233,11 @@ static char sdebug_proc_name[] = "scsi_debug"; static struct bus_type pseudo_lld_bus; +static inline sector_t dif_offset(sector_t sector) +{ + return sector << 3; +} + static struct device_driver sdebug_driverfs_driver = { .name = sdebug_proc_name, .bus = &pseudo_lld_bus, @@ -225,6 +246,9 @@ static struct device_driver sdebug_driverfs_driver = { static const int check_condition_result = (DRIVER_SENSE << 24) | SAM_STAT_CHECK_CONDITION; +static const int illegal_condition_result = + (DRIVER_SENSE << 24) | (DID_ABORT << 16) | SAM_STAT_CHECK_CONDITION; + static unsigned char ctrl_m_pg[] = {0xa, 10, 2, 0, 0, 0, 0, 0, 0, 0, 0x2, 0x4b}; static unsigned char iec_m_pg[] = {0x1c, 0xa, 0x08, 0, 0, 0, 0, 0, @@ -726,7 +750,12 @@ static int resp_inquiry(struct scsi_cmnd * scp, int target, } else if (0x86 == cmd[2]) { /* extended inquiry */ arr[1] = cmd[2]; /*sanity */ arr[3] = 0x3c; /* number of following entries */ - arr[4] = 0x0; /* no protection stuff */ + if (scsi_debug_dif == SD_DIF_TYPE3_PROTECTION) + arr[4] = 0x4; /* SPT: GRD_CHK:1 */ + else if (scsi_debug_dif) + arr[4] = 0x5; /* SPT: GRD_CHK:1, REF_CHK:1 */ + else + arr[4] = 0x0; /* no protection stuff */ arr[5] = 0x7; /* head of q, ordered + simple q's */ } else if (0x87 == cmd[2]) { /* mode page policy */ arr[1] = cmd[2]; /*sanity */ @@ -767,6 +796,7 @@ static int resp_inquiry(struct scsi_cmnd * scp, int target, arr[2] = scsi_debug_scsi_level; arr[3] = 2; /* response_data_format==2 */ arr[4] = SDEBUG_LONG_INQ_SZ - 5; + arr[5] = scsi_debug_dif ? 1 : 0; /* PROTECT bit */ if (0 == scsi_debug_vpd_use_hostno) arr[5] = 0x10; /* claim: implicit TGPS */ arr[6] = 0x10; /* claim: MultiP */ @@ -915,6 +945,12 @@ static int resp_readcap16(struct scsi_cmnd * scp, arr[9] = (scsi_debug_sector_size >> 16) & 0xff; arr[10] = (scsi_debug_sector_size >> 8) & 0xff; arr[11] = scsi_debug_sector_size & 0xff; + + if (scsi_debug_dif) { + arr[12] = (scsi_debug_dif - 1) << 1; /* P_TYPE */ + arr[12] |= 1; /* PROT_EN */ + } + return fill_from_dev_buffer(scp, arr, min(alloc_len, SDEBUG_READCAP16_ARR_SZ)); } @@ -1066,6 +1102,10 @@ static int resp_ctrl_m_pg(unsigned char * p, int pcontrol, int target) ctrl_m_pg[2] |= 0x4; else ctrl_m_pg[2] &= ~0x4; + + if (scsi_debug_ato) + ctrl_m_pg[5] |= 0x80; /* ATO=1 */ + memcpy(p, ctrl_m_pg, sizeof(ctrl_m_pg)); if (1 == pcontrol) memcpy(p + 2, ch_ctrl_m_pg, sizeof(ch_ctrl_m_pg)); @@ -1536,6 +1576,87 @@ static int do_device_access(struct scsi_cmnd *scmd, return ret; } +static int prot_verify_read(struct scsi_cmnd *SCpnt, sector_t start_sec, + unsigned int sectors) +{ + unsigned int i, resid; + struct scatterlist *psgl; + struct sd_dif_tuple *sdt; + sector_t sector; + sector_t tmp_sec = start_sec; + void *paddr; + + start_sec = do_div(tmp_sec, sdebug_store_sectors); + + sdt = (struct sd_dif_tuple *)(dif_storep + dif_offset(start_sec)); + + for (i = 0 ; i < sectors ; i++) { + u16 csum; + + if (sdt[i].app_tag == 0xffff) + continue; + + sector = start_sec + i; + + switch (scsi_debug_guard) { + case 1: + csum = ip_compute_csum(fake_storep + + sector * scsi_debug_sector_size, + scsi_debug_sector_size); + break; + case 0: + csum = crc_t10dif(fake_storep + + sector * scsi_debug_sector_size, + scsi_debug_sector_size); + csum = cpu_to_be16(csum); + break; + default: + BUG(); + } + + if (sdt[i].guard_tag != csum) { + printk(KERN_ERR "%s: GUARD check failed on sector %lu" \ + " rcvd 0x%04x, data 0x%04x\n", __func__, + (unsigned long)sector, + be16_to_cpu(sdt[i].guard_tag), + be16_to_cpu(csum)); + dif_errors++; + return 0x01; + } + + if (scsi_debug_dif != SD_DIF_TYPE3_PROTECTION && + be32_to_cpu(sdt[i].ref_tag) != (sector & 0xffffffff)) { + printk(KERN_ERR "%s: REF check failed on sector %lu\n", + __func__, (unsigned long)sector); + dif_errors++; + return 0x03; + } + } + + resid = sectors * 8; /* Bytes of protection data to copy into sgl */ + sector = start_sec; + + scsi_for_each_prot_sg(SCpnt, psgl, scsi_prot_sg_count(SCpnt), i) { + int len = min(psgl->length, resid); + + paddr = kmap_atomic(sg_page(psgl), KM_IRQ0) + psgl->offset; + memcpy(paddr, dif_storep + dif_offset(sector), len); + + sector += len >> 3; + if (sector >= sdebug_store_sectors) { + /* Force wrap */ + tmp_sec = sector; + sector = do_div(tmp_sec, sdebug_store_sectors); + } + resid -= len; + kunmap_atomic(paddr, KM_IRQ0); + } + + dix_reads++; + + return 0; +} + static int resp_read(struct scsi_cmnd *SCpnt, unsigned long long lba, unsigned int num, struct sdebug_dev_info *devip) { @@ -1563,12 +1684,162 @@ static int resp_read(struct scsi_cmnd *SCpnt, unsigned long long lba, } return check_condition_result; } + + /* DIX + T10 DIF */ + if (scsi_debug_dix && scsi_prot_sg_count(SCpnt)) { + int prot_ret = prot_verify_read(SCpnt, lba, num); + + if (prot_ret) { + mk_sense_buffer(devip, ABORTED_COMMAND, 0x10, prot_ret); + return illegal_condition_result; + } + } + read_lock_irqsave(&atomic_rw, iflags); ret = do_device_access(SCpnt, devip, lba, num, 0); read_unlock_irqrestore(&atomic_rw, iflags); return ret; } +void dump_sector(unsigned char *buf, int len) +{ + int i, j; + + printk(KERN_ERR ">>> Sector Dump <<<\n"); + + for (i = 0 ; i < len ; i += 16) { + printk(KERN_ERR "%04d: ", i); + + for (j = 0 ; j < 16 ; j++) { + unsigned char c = buf[i+j]; + if (c >= 0x20 && c < 0x7e) + printk(" %c ", buf[i+j]); + else + printk("%02x ", buf[i+j]); + } + + printk("\n"); + } +} + +static int prot_verify_write(struct scsi_cmnd *SCpnt, sector_t start_sec, + unsigned int sectors) +{ + int i, j, ret; + struct sd_dif_tuple *sdt; + struct scatterlist *dsgl = scsi_sglist(SCpnt); + struct scatterlist *psgl = scsi_prot_sglist(SCpnt); + void *daddr, *paddr; + sector_t tmp_sec = start_sec; + sector_t sector; + int ppage_offset; + unsigned short csum; + + sector = do_div(tmp_sec, sdebug_store_sectors); + + if (((SCpnt->cmnd[1] >> 5) & 7) != 1) { + printk(KERN_WARNING "scsi_debug: WRPROTECT != 1\n"); + return 0; + } + + BUG_ON(scsi_sg_count(SCpnt) == 0); + BUG_ON(scsi_prot_sg_count(SCpnt) == 0); + + paddr = kmap_atomic(sg_page(psgl), KM_IRQ1) + psgl->offset; + ppage_offset = 0; + + /* For each data page */ + scsi_for_each_sg(SCpnt, dsgl, scsi_sg_count(SCpnt), i) { + daddr = kmap_atomic(sg_page(dsgl), KM_IRQ0) + dsgl->offset; + + /* For each sector-sized chunk in data page */ + for (j = 0 ; j < dsgl->length ; j += scsi_debug_sector_size) { + + /* If we're at the end of the current + * protection page advance to the next one + */ + if (ppage_offset >= psgl->length) { + kunmap_atomic(paddr, KM_IRQ1); + psgl = sg_next(psgl); + BUG_ON(psgl == NULL); + paddr = kmap_atomic(sg_page(psgl), KM_IRQ1) + + psgl->offset; + ppage_offset = 0; + } + + sdt = paddr + ppage_offset; + + switch (scsi_debug_guard) { + case 1: + csum = ip_compute_csum(daddr, + scsi_debug_sector_size); + break; + case 0: + csum = cpu_to_be16(crc_t10dif(daddr, + scsi_debug_sector_size)); + break; + default: + BUG(); + ret = 0; + goto out; + } + + if (sdt->guard_tag != csum) { + printk(KERN_ERR + "%s: GUARD check failed on sector %lu " \ + "rcvd 0x%04x, calculated 0x%04x\n", + __func__, (unsigned long)sector, + be16_to_cpu(sdt->guard_tag), + be16_to_cpu(csum)); + ret = 0x01; + dump_sector(daddr, scsi_debug_sector_size); + goto out; + } + + if (scsi_debug_dif != SD_DIF_TYPE3_PROTECTION && + be32_to_cpu(sdt->ref_tag) + != (start_sec & 0xffffffff)) { + printk(KERN_ERR + "%s: REF check failed on sector %lu\n", + __func__, (unsigned long)sector); + ret = 0x03; + dump_sector(daddr, scsi_debug_sector_size); + goto out; + } + + /* Would be great to copy this in bigger + * chunks. However, for the sake of + * correctness we need to verify each sector + * before writing it to "stable" storage + */ + memcpy(dif_storep + dif_offset(sector), sdt, 8); + + sector++; + + if (sector == sdebug_store_sectors) + sector = 0; /* Force wrap */ + + start_sec++; + daddr += scsi_debug_sector_size; + ppage_offset += sizeof(struct sd_dif_tuple); + } + + kunmap_atomic(daddr, KM_IRQ0); + } + + kunmap_atomic(paddr, KM_IRQ1); + + dix_writes++; + + return 0; + +out: + dif_errors++; + kunmap_atomic(daddr, KM_IRQ0); + kunmap_atomic(paddr, KM_IRQ1); + return ret; +} + static int resp_write(struct scsi_cmnd *SCpnt, unsigned long long lba, unsigned int num, struct sdebug_dev_info *devip) { @@ -1579,6 +1850,16 @@ static int resp_write(struct scsi_cmnd *SCpnt, unsigned long long lba, if (ret) return ret; + /* DIX + T10 DIF */ + if (scsi_debug_dix && scsi_prot_sg_count(SCpnt)) { + int prot_ret = prot_verify_write(SCpnt, lba, num); + + if (prot_ret) { + mk_sense_buffer(devip, ILLEGAL_REQUEST, 0x10, prot_ret); + return illegal_condition_result; + } + } + write_lock_irqsave(&atomic_rw, iflags); ret = do_device_access(SCpnt, devip, lba, num, 1); write_unlock_irqrestore(&atomic_rw, iflags); @@ -2095,6 +2376,10 @@ module_param_named(virtual_gb, scsi_debug_virtual_gb, int, S_IRUGO | S_IWUSR); module_param_named(vpd_use_hostno, scsi_debug_vpd_use_hostno, int, S_IRUGO | S_IWUSR); module_param_named(sector_size, scsi_debug_sector_size, int, S_IRUGO); +module_param_named(dix, scsi_debug_dix, int, S_IRUGO); +module_param_named(dif, scsi_debug_dif, int, S_IRUGO); +module_param_named(guard, scsi_debug_guard, int, S_IRUGO); +module_param_named(ato, scsi_debug_ato, int, S_IRUGO); MODULE_AUTHOR("Eric Youngdale + Douglas Gilbert"); MODULE_DESCRIPTION("SCSI debug adapter driver"); @@ -2117,7 +2402,10 @@ MODULE_PARM_DESC(scsi_level, "SCSI level to simulate(def=5[SPC-3])"); MODULE_PARM_DESC(virtual_gb, "virtual gigabyte size (def=0 -> use dev_size_mb)"); MODULE_PARM_DESC(vpd_use_hostno, "0 -> dev ids ignore hostno (def=1 -> unique dev ids)"); MODULE_PARM_DESC(sector_size, "hardware sector size in bytes (def=512)"); - +MODULE_PARM_DESC(dix, "data integrity extensions mask (def=0)"); +MODULE_PARM_DESC(dif, "data integrity field type: 0-3 (def=0)"); +MODULE_PARM_DESC(guard, "protection checksum: 0=crc, 1=ip (def=0)"); +MODULE_PARM_DESC(ato, "application tag ownership: 0=disk 1=host (def=1)"); static char sdebug_info[256]; @@ -2164,14 +2452,14 @@ static int scsi_debug_proc_info(struct Scsi_Host *host, char *buffer, char **sta "delay=%d, max_luns=%d, scsi_level=%d\n" "sector_size=%d bytes, cylinders=%d, heads=%d, sectors=%d\n" "number of aborts=%d, device_reset=%d, bus_resets=%d, " - "host_resets=%d\n", + "host_resets=%d\ndix_reads=%d dix_writes=%d dif_errors=%d\n", SCSI_DEBUG_VERSION, scsi_debug_version_date, scsi_debug_num_tgts, scsi_debug_dev_size_mb, scsi_debug_opts, scsi_debug_every_nth, scsi_debug_cmnd_count, scsi_debug_delay, scsi_debug_max_luns, scsi_debug_scsi_level, scsi_debug_sector_size, sdebug_cylinders_per, sdebug_heads, sdebug_sectors_per, num_aborts, num_dev_resets, num_bus_resets, - num_host_resets); + num_host_resets, dix_reads, dix_writes, dif_errors); if (pos < offset) { len = 0; begin = pos; @@ -2452,6 +2740,31 @@ static ssize_t sdebug_sector_size_show(struct device_driver * ddp, char * buf) } DRIVER_ATTR(sector_size, S_IRUGO, sdebug_sector_size_show, NULL); +static ssize_t sdebug_dix_show(struct device_driver *ddp, char *buf) +{ + return scnprintf(buf, PAGE_SIZE, "%d\n", scsi_debug_dix); +} +DRIVER_ATTR(dix, S_IRUGO, sdebug_dix_show, NULL); + +static ssize_t sdebug_dif_show(struct device_driver *ddp, char *buf) +{ + return scnprintf(buf, PAGE_SIZE, "%d\n", scsi_debug_dif); +} +DRIVER_ATTR(dif, S_IRUGO, sdebug_dif_show, NULL); + +static ssize_t sdebug_guard_show(struct device_driver *ddp, char *buf) +{ + return scnprintf(buf, PAGE_SIZE, "%d\n", scsi_debug_guard); +} +DRIVER_ATTR(guard, S_IRUGO, sdebug_guard_show, NULL); + +static ssize_t sdebug_ato_show(struct device_driver *ddp, char *buf) +{ + return scnprintf(buf, PAGE_SIZE, "%d\n", scsi_debug_ato); +} +DRIVER_ATTR(ato, S_IRUGO, sdebug_ato_show, NULL); + + /* Note: The following function creates attribute files in the /sys/bus/pseudo/drivers/scsi_debug directory. The advantage of these files (over those found in the /sys/module/scsi_debug/parameters @@ -2478,11 +2791,19 @@ static int do_create_driverfs_files(void) ret |= driver_create_file(&sdebug_driverfs_driver, &driver_attr_virtual_gb); ret |= driver_create_file(&sdebug_driverfs_driver, &driver_attr_vpd_use_hostno); ret |= driver_create_file(&sdebug_driverfs_driver, &driver_attr_sector_size); + ret |= driver_create_file(&sdebug_driverfs_driver, &driver_attr_dix); + ret |= driver_create_file(&sdebug_driverfs_driver, &driver_attr_dif); + ret |= driver_create_file(&sdebug_driverfs_driver, &driver_attr_guard); + ret |= driver_create_file(&sdebug_driverfs_driver, &driver_attr_ato); return ret; } static void do_remove_driverfs_files(void) { + driver_remove_file(&sdebug_driverfs_driver, &driver_attr_ato); + driver_remove_file(&sdebug_driverfs_driver, &driver_attr_guard); + driver_remove_file(&sdebug_driverfs_driver, &driver_attr_dif); + driver_remove_file(&sdebug_driverfs_driver, &driver_attr_dix); driver_remove_file(&sdebug_driverfs_driver, &driver_attr_sector_size); driver_remove_file(&sdebug_driverfs_driver, &driver_attr_vpd_use_hostno); driver_remove_file(&sdebug_driverfs_driver, &driver_attr_virtual_gb); @@ -2526,11 +2847,33 @@ static int __init scsi_debug_init(void) case 4096: break; default: - printk(KERN_ERR "scsi_debug_init: invalid sector_size %u\n", + printk(KERN_ERR "scsi_debug_init: invalid sector_size %d\n", scsi_debug_sector_size); return -EINVAL; } + switch (scsi_debug_dif) { + + case SD_DIF_TYPE0_PROTECTION: + case SD_DIF_TYPE1_PROTECTION: + case SD_DIF_TYPE3_PROTECTION: + break; + + default: + printk(KERN_ERR "scsi_debug_init: dif must be 0, 1 or 3\n"); + return -EINVAL; + } + + if (scsi_debug_guard > 1) { + printk(KERN_ERR "scsi_debug_init: guard must be 0 or 1\n"); + return -EINVAL; + } + + if (scsi_debug_ato > 1) { + printk(KERN_ERR "scsi_debug_init: ato must be 0 or 1\n"); + return -EINVAL; + } + if (scsi_debug_dev_size_mb < 1) scsi_debug_dev_size_mb = 1; /* force minimum 1 MB ramdisk */ sz = (unsigned long)scsi_debug_dev_size_mb * 1048576; @@ -2563,6 +2906,24 @@ static int __init scsi_debug_init(void) if (scsi_debug_num_parts > 0) sdebug_build_parts(fake_storep, sz); + if (scsi_debug_dif) { + int dif_size; + + dif_size = sdebug_store_sectors * sizeof(struct sd_dif_tuple); + dif_storep = vmalloc(dif_size); + + printk(KERN_ERR "scsi_debug_init: dif_storep %u bytes @ %p\n", + dif_size, dif_storep); + + if (dif_storep == NULL) { + printk(KERN_ERR "scsi_debug_init: out of mem. (DIX)\n"); + ret = -ENOMEM; + goto free_vm; + } + + memset(dif_storep, 0xff, dif_size); + } + ret = device_register(&pseudo_primary); if (ret < 0) { printk(KERN_WARNING "scsi_debug: device_register error: %d\n", @@ -2615,6 +2976,8 @@ bus_unreg: dev_unreg: device_unregister(&pseudo_primary); free_vm: + if (dif_storep) + vfree(dif_storep); vfree(fake_storep); return ret; @@ -2632,6 +2995,9 @@ static void __exit scsi_debug_exit(void) bus_unregister(&pseudo_lld_bus); device_unregister(&pseudo_primary); + if (dif_storep) + vfree(dif_storep); + vfree(fake_storep); } @@ -2732,6 +3098,8 @@ int scsi_debug_queuecommand(struct scsi_cmnd *SCpnt, done_funct_t done) struct sdebug_dev_info *devip = NULL; int inj_recovered = 0; int inj_transport = 0; + int inj_dif = 0; + int inj_dix = 0; int delay_override = 0; scsi_set_resid(SCpnt, 0); @@ -2769,6 +3137,10 @@ int scsi_debug_queuecommand(struct scsi_cmnd *SCpnt, done_funct_t done) inj_recovered = 1; /* to reads and writes below */ else if (SCSI_DEBUG_OPT_TRANSPORT_ERR & scsi_debug_opts) inj_transport = 1; /* to reads and writes below */ + else if (SCSI_DEBUG_OPT_DIF_ERR & scsi_debug_opts) + inj_dif = 1; /* to reads and writes below */ + else if (SCSI_DEBUG_OPT_DIX_ERR & scsi_debug_opts) + inj_dix = 1; /* to reads and writes below */ } if (devip->wlun) { @@ -2870,6 +3242,12 @@ int scsi_debug_queuecommand(struct scsi_cmnd *SCpnt, done_funct_t done) mk_sense_buffer(devip, ABORTED_COMMAND, TRANSPORT_PROBLEM, ACK_NAK_TO); errsts = check_condition_result; + } else if (inj_dif && (0 == errsts)) { + mk_sense_buffer(devip, ABORTED_COMMAND, 0x10, 1); + errsts = illegal_condition_result; + } else if (inj_dix && (0 == errsts)) { + mk_sense_buffer(devip, ILLEGAL_REQUEST, 0x10, 1); + errsts = illegal_condition_result; } break; case REPORT_LUNS: /* mandatory, ignore unit attention */ @@ -2894,6 +3272,12 @@ int scsi_debug_queuecommand(struct scsi_cmnd *SCpnt, done_funct_t done) mk_sense_buffer(devip, RECOVERED_ERROR, THRESHOLD_EXCEEDED, 0); errsts = check_condition_result; + } else if (inj_dif && (0 == errsts)) { + mk_sense_buffer(devip, ABORTED_COMMAND, 0x10, 1); + errsts = illegal_condition_result; + } else if (inj_dix && (0 == errsts)) { + mk_sense_buffer(devip, ILLEGAL_REQUEST, 0x10, 1); + errsts = illegal_condition_result; } break; case MODE_SENSE: @@ -2982,6 +3366,7 @@ static int sdebug_driver_probe(struct device * dev) int error = 0; struct sdebug_host_info *sdbg_host; struct Scsi_Host *hpnt; + int host_prot; sdbg_host = to_sdebug_host(dev); @@ -3000,6 +3385,50 @@ static int sdebug_driver_probe(struct device * dev) hpnt->max_id = scsi_debug_num_tgts; hpnt->max_lun = SAM2_WLUN_REPORT_LUNS; /* = scsi_debug_max_luns; */ + host_prot = 0; + + switch (scsi_debug_dif) { + + case SD_DIF_TYPE1_PROTECTION: + host_prot = SHOST_DIF_TYPE1_PROTECTION; + if (scsi_debug_dix) + host_prot |= SHOST_DIX_TYPE1_PROTECTION; + break; + + case SD_DIF_TYPE2_PROTECTION: + host_prot = SHOST_DIF_TYPE2_PROTECTION; + if (scsi_debug_dix) + host_prot |= SHOST_DIX_TYPE2_PROTECTION; + break; + + case SD_DIF_TYPE3_PROTECTION: + host_prot = SHOST_DIF_TYPE3_PROTECTION; + if (scsi_debug_dix) + host_prot |= SHOST_DIX_TYPE3_PROTECTION; + break; + + default: + if (scsi_debug_dix) + host_prot |= SHOST_DIX_TYPE0_PROTECTION; + break; + } + + scsi_host_set_prot(hpnt, host_prot); + + printk(KERN_INFO "scsi_debug: host protection%s%s%s%s%s%s%s\n", + (host_prot & SHOST_DIF_TYPE1_PROTECTION) ? " DIF1" : "", + (host_prot & SHOST_DIF_TYPE2_PROTECTION) ? " DIF2" : "", + (host_prot & SHOST_DIF_TYPE3_PROTECTION) ? " DIF3" : "", + (host_prot & SHOST_DIX_TYPE0_PROTECTION) ? " DIX0" : "", + (host_prot & SHOST_DIX_TYPE1_PROTECTION) ? " DIX1" : "", + (host_prot & SHOST_DIX_TYPE2_PROTECTION) ? " DIX2" : "", + (host_prot & SHOST_DIX_TYPE3_PROTECTION) ? " DIX3" : ""); + + if (scsi_debug_guard == 1) + scsi_host_set_guard(hpnt, SHOST_DIX_GUARD_IP); + else + scsi_host_set_guard(hpnt, SHOST_DIX_GUARD_CRC); + error = scsi_add_host(hpnt, &sdbg_host->dev); if (error) { printk(KERN_ERR "%s: scsi_add_host failed\n", __func__); -- cgit v0.10.2 From d0ace3c5eedff92333de0a5dd00cfb78a18b87cd Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Mon, 12 Jan 2009 10:53:04 -0800 Subject: [SCSI] scsi_debug: needs CRC_T10DIF Fix scsi_debug build error: drivers/built-in.o: In function `resp_read': scsi_debug.c:(.text+0x21379a): undefined reference to `crc_t10dif' drivers/built-in.o: In function `resp_write': scsi_debug.c:(.text+0x213fca): undefined reference to `crc_t10dif' Signed-off-by: Randy Dunlap Signed-off-by: James Bottomley diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig index 256c7be..8f0a5cb 100644 --- a/drivers/scsi/Kconfig +++ b/drivers/scsi/Kconfig @@ -1535,6 +1535,7 @@ config SCSI_NSP32 config SCSI_DEBUG tristate "SCSI debugging host simulator" depends on SCSI + select CRC_T10DIF help This is a host adapter simulator that can simulate multiple hosts each with multiple dummy SCSI devices (disks). It defaults to one -- cgit v0.10.2 From d943aeebc5194f3c6a81fb139ba406040324e4f3 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Mon, 12 Jan 2009 10:50:58 -0800 Subject: [SCSI] libfc: needs CRC32 libfc uses crc32 functions, so cause it to be built via select: drivers/built-in.o: In function `fc_frame_crc_check': (.text+0x75dae): undefined reference to `crc32_le' drivers/built-in.o: In function `fc_fcp_recv': fc_fcp.c:(.text+0x7b919): undefined reference to `crc32_le' fc_fcp.c:(.text+0x7b9d5): undefined reference to `crc32_le' fc_fcp.c:(.text+0x7ba54): undefined reference to `crc32_le' Signed-off-by: Randy Dunlap Acked-by: Robert Love Signed-off-by: James Bottomley diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig index 8f0a5cb..898c2b5 100644 --- a/drivers/scsi/Kconfig +++ b/drivers/scsi/Kconfig @@ -608,6 +608,7 @@ config SCSI_FLASHPOINT config LIBFC tristate "LibFC module" select SCSI_FC_ATTRS + select CRC32 ---help--- Fibre Channel library module -- cgit v0.10.2 From 6e7490c73d8cc48e7084ac976c8be7bbaf530acf Mon Sep 17 00:00:00 2001 From: FUJITA Tomonori Date: Sun, 11 Jan 2009 17:38:12 +0900 Subject: [SCSI] libfc: fix compile warning I got the following warnings on IA64: drivers/scsi/libfc/fc_lport.c: In function 'fc_lport_recv_flogi_req': drivers/scsi/libfc/fc_lport.c:788: warning: format '%llx' expects type 'long long unsigned int', but argument 3 has type 'u64' drivers/scsi/libfc/fc_lport.c:792: warning: format '%llx' expects type 'long long unsigned int', but argument 3 has type 'u64' scsi/libfc/fc_rport.c: In function 'fc_rport_recv_plogi_req': /home/fujita/git/linux-2.6/drivers/scsi/libfc/fc_rport.c:968: warning: format '%llx' expects type 'long long unsigned int', but argument 4 has type 'u64' Signed-off-by: FUJITA Tomonori Cc: Robert Love Signed-off-by: James Bottomley diff --git a/drivers/scsi/libfc/fc_lport.c b/drivers/scsi/libfc/fc_lport.c index 2ae50a1..7ef4450 100644 --- a/drivers/scsi/libfc/fc_lport.c +++ b/drivers/scsi/libfc/fc_lport.c @@ -762,10 +762,11 @@ static void fc_lport_recv_flogi_req(struct fc_seq *sp_in, remote_wwpn = get_unaligned_be64(&flp->fl_wwpn); if (remote_wwpn == lport->wwpn) { FC_DBG("FLOGI from port with same WWPN %llx " - "possible configuration error\n", remote_wwpn); + "possible configuration error\n", + (unsigned long long)remote_wwpn); goto out; } - FC_DBG("FLOGI from port WWPN %llx\n", remote_wwpn); + FC_DBG("FLOGI from port WWPN %llx\n", (unsigned long long)remote_wwpn); /* * XXX what is the right thing to do for FIDs? diff --git a/drivers/scsi/libfc/fc_rport.c b/drivers/scsi/libfc/fc_rport.c index dae6513..0472bb7 100644 --- a/drivers/scsi/libfc/fc_rport.c +++ b/drivers/scsi/libfc/fc_rport.c @@ -988,7 +988,7 @@ static void fc_rport_recv_plogi_req(struct fc_rport *rport, switch (rdata->rp_state) { case RPORT_ST_INIT: FC_DEBUG_RPORT("incoming PLOGI from %6x wwpn %llx state INIT " - "- reject\n", sid, wwpn); + "- reject\n", sid, (unsigned long long)wwpn); reject = ELS_RJT_UNSUP; break; case RPORT_ST_PLOGI: -- cgit v0.10.2 From 71fa7421822a251fc3e9ffb54653395b6b964309 Mon Sep 17 00:00:00 2001 From: Jan Engelhardt Date: Sun, 11 Jan 2009 10:38:59 +0100 Subject: [SCSI] lpfc: constify virtual function tables Signed-off-by: Jan Engelhardt Acked-by: James Smart Signed-off-by: James Bottomley diff --git a/drivers/scsi/lpfc/lpfc_debugfs.c b/drivers/scsi/lpfc/lpfc_debugfs.c index b615eda..81cdcf4 100644 --- a/drivers/scsi/lpfc/lpfc_debugfs.c +++ b/drivers/scsi/lpfc/lpfc_debugfs.c @@ -1132,7 +1132,7 @@ lpfc_debugfs_dumpDataDif_release(struct inode *inode, struct file *file) } #undef lpfc_debugfs_op_disc_trc -static struct file_operations lpfc_debugfs_op_disc_trc = { +static const struct file_operations lpfc_debugfs_op_disc_trc = { .owner = THIS_MODULE, .open = lpfc_debugfs_disc_trc_open, .llseek = lpfc_debugfs_lseek, @@ -1141,7 +1141,7 @@ static struct file_operations lpfc_debugfs_op_disc_trc = { }; #undef lpfc_debugfs_op_nodelist -static struct file_operations lpfc_debugfs_op_nodelist = { +static const struct file_operations lpfc_debugfs_op_nodelist = { .owner = THIS_MODULE, .open = lpfc_debugfs_nodelist_open, .llseek = lpfc_debugfs_lseek, @@ -1150,7 +1150,7 @@ static struct file_operations lpfc_debugfs_op_nodelist = { }; #undef lpfc_debugfs_op_hbqinfo -static struct file_operations lpfc_debugfs_op_hbqinfo = { +static const struct file_operations lpfc_debugfs_op_hbqinfo = { .owner = THIS_MODULE, .open = lpfc_debugfs_hbqinfo_open, .llseek = lpfc_debugfs_lseek, @@ -1159,7 +1159,7 @@ static struct file_operations lpfc_debugfs_op_hbqinfo = { }; #undef lpfc_debugfs_op_dumpHBASlim -static struct file_operations lpfc_debugfs_op_dumpHBASlim = { +static const struct file_operations lpfc_debugfs_op_dumpHBASlim = { .owner = THIS_MODULE, .open = lpfc_debugfs_dumpHBASlim_open, .llseek = lpfc_debugfs_lseek, @@ -1168,7 +1168,7 @@ static struct file_operations lpfc_debugfs_op_dumpHBASlim = { }; #undef lpfc_debugfs_op_dumpHostSlim -static struct file_operations lpfc_debugfs_op_dumpHostSlim = { +static const struct file_operations lpfc_debugfs_op_dumpHostSlim = { .owner = THIS_MODULE, .open = lpfc_debugfs_dumpHostSlim_open, .llseek = lpfc_debugfs_lseek, @@ -1177,7 +1177,7 @@ static struct file_operations lpfc_debugfs_op_dumpHostSlim = { }; #undef lpfc_debugfs_op_dumpData -static struct file_operations lpfc_debugfs_op_dumpData = { +static const struct file_operations lpfc_debugfs_op_dumpData = { .owner = THIS_MODULE, .open = lpfc_debugfs_dumpData_open, .llseek = lpfc_debugfs_lseek, @@ -1187,7 +1187,7 @@ static struct file_operations lpfc_debugfs_op_dumpData = { }; #undef lpfc_debugfs_op_dumpDif -static struct file_operations lpfc_debugfs_op_dumpDif = { +static const struct file_operations lpfc_debugfs_op_dumpDif = { .owner = THIS_MODULE, .open = lpfc_debugfs_dumpDif_open, .llseek = lpfc_debugfs_lseek, @@ -1197,7 +1197,7 @@ static struct file_operations lpfc_debugfs_op_dumpDif = { }; #undef lpfc_debugfs_op_slow_ring_trc -static struct file_operations lpfc_debugfs_op_slow_ring_trc = { +static const struct file_operations lpfc_debugfs_op_slow_ring_trc = { .owner = THIS_MODULE, .open = lpfc_debugfs_slow_ring_trc_open, .llseek = lpfc_debugfs_lseek, -- cgit v0.10.2 From 0762a4824d6c6f8eb5d2646dfda95581d99afaa5 Mon Sep 17 00:00:00 2001 From: Hannes Reinecke Date: Mon, 12 Jan 2009 09:28:55 +0100 Subject: [SCSI] Check for deleted device in scsi_device_online() scsi_device_online() is not just a negation of SDEV_OFFLINE, also devices in state SDEV_DEL are actually offline. Signed-off-by: Hannes Reinecke Signed-off-by: James Bottomley diff --git a/include/scsi/scsi_device.h b/include/scsi/scsi_device.h index 9576690..15b0926 100644 --- a/include/scsi/scsi_device.h +++ b/include/scsi/scsi_device.h @@ -401,7 +401,8 @@ static inline unsigned int sdev_id(struct scsi_device *sdev) */ static inline int scsi_device_online(struct scsi_device *sdev) { - return sdev->sdev_state != SDEV_OFFLINE; + return (sdev->sdev_state != SDEV_OFFLINE && + sdev->sdev_state != SDEV_DEL); } static inline int scsi_device_blocked(struct scsi_device *sdev) { -- cgit v0.10.2 From 5ef074161b5bcd84acfe19f0ecd72b74765d8770 Mon Sep 17 00:00:00 2001 From: Robert Love Date: Wed, 14 Jan 2009 11:14:32 -0800 Subject: [SCSI] Improve SCSI_LOGGING Kconfig entry The Kconfig entry for SCSI_LOGGING refers the reader to drivers/scsi/scsi.c, but I didn't find any useful information there. There is certainly logging code in that file, but the logging types and logging levels are described in drivers/scsi/scsi_logging.h. Also, the procfs file referred to in the section is incorrect. It should be /proc/sys/dev/scsi/logging_level and not /proc/scsi/scsi. Signed-off-by: Robert Love Signed-off-by: James Bottomley diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig index 898c2b5..601c2a8 100644 --- a/drivers/scsi/Kconfig +++ b/drivers/scsi/Kconfig @@ -224,14 +224,15 @@ config SCSI_LOGGING can enable logging by saying Y to "/proc file system support" and "Sysctl support" below and executing the command - echo "scsi log token [level]" > /proc/scsi/scsi + echo > /proc/sys/dev/scsi/logging_level - at boot time after the /proc file system has been mounted. + where is a four byte value representing the logging type + and logging level for each type of logging selected. - There are a number of things that can be used for 'token' (you can - find them in the source: ), and this - allows you to select the types of information you want, and the - level allows you to select the level of verbosity. + There are a number of logging types and you can find them in the + source at . The logging levels + are also described in that file and they determine the verbosity of + the logging for each logging type. If you say N here, it may be harder to track down some types of SCSI problems. If you say Y here your kernel will be somewhat larger, but -- cgit v0.10.2 From 49799fee82b4f78c45b1926be24e45b5cf667083 Mon Sep 17 00:00:00 2001 From: Aaro Koskinen Date: Thu, 15 Jan 2009 17:13:36 +0200 Subject: [SCSI] sym53c8xx: Keep transfer negotiations valid (The patch updated based on testing and comments from Tony Battersby.) Change the sym53c8xx_2 driver negotiation logic so that the driver will tolerate better device removals. Negotiation message(s) will be sent with every INQUIRY and REQUEST SENSE command, and whenever there is a change in goals or when the device reports check condition. The patch was made specifically to address the case where you hotswap the disk using remove-single-device/add-single-device commands through /proc/scsi/scsi. Without the patch the driver keeps using old transfer parameters even though the target is reset and reports check condition, so the data transfer of the very first INQUIRY will fail. Signed-off-by: Aaro Koskinen Tested-by: Tony Battersby Signed-off-by: James Bottomley diff --git a/drivers/scsi/sym53c8xx_2/sym_hipd.c b/drivers/scsi/sym53c8xx_2/sym_hipd.c index 98df165..fe6359d 100644 --- a/drivers/scsi/sym53c8xx_2/sym_hipd.c +++ b/drivers/scsi/sym53c8xx_2/sym_hipd.c @@ -1433,13 +1433,12 @@ static int sym_prepare_nego(struct sym_hcb *np, struct sym_ccb *cp, u_char *msgp * Many devices implement PPR in a buggy way, so only use it if we * really want to. */ - if (goal->offset && - (goal->iu || goal->dt || goal->qas || (goal->period < 0xa))) { + if (goal->renego == NS_PPR || (goal->offset && + (goal->iu || goal->dt || goal->qas || (goal->period < 0xa)))) { nego = NS_PPR; - } else if (spi_width(starget) != goal->width) { + } else if (goal->renego == NS_WIDE || goal->width) { nego = NS_WIDE; - } else if (spi_period(starget) != goal->period || - spi_offset(starget) != goal->offset) { + } else if (goal->renego == NS_SYNC || goal->offset) { nego = NS_SYNC; } else { goal->check_nego = 0; @@ -2049,11 +2048,13 @@ static void sym_setwide(struct sym_hcb *np, int target, u_char wide) struct sym_tcb *tp = &np->target[target]; struct scsi_target *starget = tp->starget; - if (spi_width(starget) == wide) - return; - sym_settrans(np, target, 0, 0, 0, wide, 0, 0); + if (wide) + tp->tgoal.renego = NS_WIDE; + else + tp->tgoal.renego = 0; + tp->tgoal.check_nego = 0; tp->tgoal.width = wide; spi_offset(starget) = 0; spi_period(starget) = 0; @@ -2080,6 +2081,12 @@ sym_setsync(struct sym_hcb *np, int target, sym_settrans(np, target, 0, ofs, per, wide, div, fak); + if (wide) + tp->tgoal.renego = NS_WIDE; + else if (ofs) + tp->tgoal.renego = NS_SYNC; + else + tp->tgoal.renego = 0; spi_period(starget) = per; spi_offset(starget) = ofs; spi_iu(starget) = spi_dt(starget) = spi_qas(starget) = 0; @@ -2106,6 +2113,10 @@ sym_setpprot(struct sym_hcb *np, int target, u_char opts, u_char ofs, sym_settrans(np, target, opts, ofs, per, wide, div, fak); + if (wide || ofs) + tp->tgoal.renego = NS_PPR; + else + tp->tgoal.renego = 0; spi_width(starget) = tp->tgoal.width = wide; spi_period(starget) = tp->tgoal.period = per; spi_offset(starget) = tp->tgoal.offset = ofs; @@ -3516,6 +3527,7 @@ static void sym_sir_task_recovery(struct sym_hcb *np, int num) spi_dt(starget) = 0; spi_qas(starget) = 0; tp->tgoal.check_nego = 1; + tp->tgoal.renego = 0; } /* @@ -5135,9 +5147,14 @@ int sym_queue_scsiio(struct sym_hcb *np, struct scsi_cmnd *cmd, struct sym_ccb * /* * Build a negotiation message if needed. * (nego_status is filled by sym_prepare_nego()) + * + * Always negotiate on INQUIRY and REQUEST SENSE. + * */ cp->nego_status = 0; - if (tp->tgoal.check_nego && !tp->nego_cp && lp) { + if ((tp->tgoal.check_nego || + cmd->cmnd[0] == INQUIRY || cmd->cmnd[0] == REQUEST_SENSE) && + !tp->nego_cp && lp) { msglen += sym_prepare_nego(np, cp, msgptr + msglen); } diff --git a/drivers/scsi/sym53c8xx_2/sym_hipd.h b/drivers/scsi/sym53c8xx_2/sym_hipd.h index ad07880..233a3d0 100644 --- a/drivers/scsi/sym53c8xx_2/sym_hipd.h +++ b/drivers/scsi/sym53c8xx_2/sym_hipd.h @@ -354,6 +354,7 @@ struct sym_trans { unsigned int dt:1; unsigned int qas:1; unsigned int check_nego:1; + unsigned int renego:2; }; /* -- cgit v0.10.2 From 951948a397e3ddc96658efd648b9d66622965b19 Mon Sep 17 00:00:00 2001 From: Christof Schmitt Date: Thu, 15 Jan 2009 16:51:48 +0100 Subject: [SCSI] scsi_transport_fc: Add missing parenthesis to Point-To-Point description Fix typo by adding closing parenthesis. Signed-off-by: Christof Schmitt Signed-off-by: James Bottomley diff --git a/drivers/scsi/scsi_transport_fc.c b/drivers/scsi/scsi_transport_fc.c index 5f77417..2df7529 100644 --- a/drivers/scsi/scsi_transport_fc.c +++ b/drivers/scsi/scsi_transport_fc.c @@ -95,7 +95,7 @@ static struct { { FC_PORTTYPE_NPORT, "NPort (fabric via point-to-point)" }, { FC_PORTTYPE_NLPORT, "NLPort (fabric via loop)" }, { FC_PORTTYPE_LPORT, "LPort (private loop)" }, - { FC_PORTTYPE_PTP, "Point-To-Point (direct nport connection" }, + { FC_PORTTYPE_PTP, "Point-To-Point (direct nport connection)" }, { FC_PORTTYPE_NPIV, "NPIV VPORT" }, }; fc_enum_name_search(port_type, fc_port_type, fc_port_type_names) -- cgit v0.10.2 From 5a9ef25b14d39b8413364df12cb8d9bb7a673a32 Mon Sep 17 00:00:00 2001 From: Wayne Boyer Date: Fri, 23 Jan 2009 09:17:35 -0800 Subject: [SCSI] ipr: add MSI support Enable MSI if available/supported. Signed-off-by: Wayne Boyer Acked-by: Brian King Signed-off-by: James Bottomley diff --git a/drivers/scsi/ipr.c b/drivers/scsi/ipr.c index 0782900..3f47cd1 100644 --- a/drivers/scsi/ipr.c +++ b/drivers/scsi/ipr.c @@ -7147,6 +7147,7 @@ static void ipr_free_all_resources(struct ipr_ioa_cfg *ioa_cfg) ENTER; free_irq(pdev->irq, ioa_cfg); + pci_disable_msi(pdev); iounmap(ioa_cfg->hdw_dma_regs); pci_release_regions(pdev); ipr_free_mem(ioa_cfg); @@ -7432,6 +7433,11 @@ static int __devinit ipr_probe_ioa(struct pci_dev *pdev, goto out; } + if (!(rc = pci_enable_msi(pdev))) + dev_info(&pdev->dev, "MSI enabled\n"); + else if (ipr_debug) + dev_info(&pdev->dev, "Cannot enable MSI\n"); + dev_info(&pdev->dev, "Found IOA with IRQ: %d\n", pdev->irq); host = scsi_host_alloc(&driver_template, sizeof(*ioa_cfg)); @@ -7574,6 +7580,7 @@ out_release_regions: out_scsi_host_put: scsi_host_put(host); out_disable: + pci_disable_msi(pdev); pci_disable_device(pdev); goto out; } diff --git a/drivers/scsi/ipr.h b/drivers/scsi/ipr.h index 8f872f8..79a3ae4 100644 --- a/drivers/scsi/ipr.h +++ b/drivers/scsi/ipr.h @@ -37,8 +37,8 @@ /* * Literals */ -#define IPR_DRIVER_VERSION "2.4.1" -#define IPR_DRIVER_DATE "(April 24, 2007)" +#define IPR_DRIVER_VERSION "2.4.2" +#define IPR_DRIVER_DATE "(January 21, 2009)" /* * IPR_MAX_CMD_PER_LUN: This defines the maximum number of outstanding -- cgit v0.10.2 From 1c9fbafc8c629c89183d6dccec67a8415513b0d1 Mon Sep 17 00:00:00 2001 From: "Martin K. Petersen" Date: Sun, 4 Jan 2009 03:14:11 -0500 Subject: [SCSI] Remove SUGGEST flags The SUGGEST_* flags in the SCSI command result have been out of fashion for a while and we don't actually use them in the error handling. Remove the remaining occurrences. Signed-off-by: Martin K. Petersen Signed-off-by: James Bottomley diff --git a/drivers/s390/scsi/zfcp_fsf.c b/drivers/s390/scsi/zfcp_fsf.c index e6416f8..babe1b8 100644 --- a/drivers/s390/scsi/zfcp_fsf.c +++ b/drivers/s390/scsi/zfcp_fsf.c @@ -2147,7 +2147,6 @@ static void zfcp_fsf_send_fcp_command_task_handler(struct zfcp_fsf_req *req) if (unlikely(req->status & ZFCP_STATUS_FSFREQ_ABORTED)) { set_host_byte(scpnt, DID_SOFT_ERROR); - set_driver_byte(scpnt, SUGGEST_RETRY); goto skip_fsfstatus; } diff --git a/drivers/scsi/constants.c b/drivers/scsi/constants.c index 4003dee..e79e181 100644 --- a/drivers/scsi/constants.c +++ b/drivers/scsi/constants.c @@ -1373,21 +1373,14 @@ static const char * const driverbyte_table[]={ "DRIVER_INVALID", "DRIVER_TIMEOUT", "DRIVER_HARD", "DRIVER_SENSE"}; #define NUM_DRIVERBYTE_STRS ARRAY_SIZE(driverbyte_table) -static const char * const driversuggest_table[]={"SUGGEST_OK", -"SUGGEST_RETRY", "SUGGEST_ABORT", "SUGGEST_REMAP", "SUGGEST_DIE", -"SUGGEST_5", "SUGGEST_6", "SUGGEST_7", "SUGGEST_SENSE"}; -#define NUM_SUGGEST_STRS ARRAY_SIZE(driversuggest_table) - void scsi_show_result(int result) { int hb = host_byte(result); - int db = (driver_byte(result) & DRIVER_MASK); - int su = ((driver_byte(result) & SUGGEST_MASK) >> 4); + int db = driver_byte(result); - printk("Result: hostbyte=%s driverbyte=%s,%s\n", + printk("Result: hostbyte=%s driverbyte=%s\n", (hb < NUM_HOSTBYTE_STRS ? hostbyte_table[hb] : "invalid"), - (db < NUM_DRIVERBYTE_STRS ? driverbyte_table[db] : "invalid"), - (su < NUM_SUGGEST_STRS ? driversuggest_table[su] : "invalid")); + (db < NUM_DRIVERBYTE_STRS ? driverbyte_table[db] : "invalid")); } #else diff --git a/drivers/scsi/hptiop.c b/drivers/scsi/hptiop.c index 34be88d..af1f0af 100644 --- a/drivers/scsi/hptiop.c +++ b/drivers/scsi/hptiop.c @@ -580,8 +580,7 @@ static void hptiop_finish_scsi_req(struct hptiop_hba *hba, u32 tag, break; default: - scp->result = ((DRIVER_INVALID|SUGGEST_ABORT)<<24) | - (DID_ABORT<<16); + scp->result = DRIVER_INVALID << 24 | DID_ABORT << 16; break; } diff --git a/drivers/scsi/ips.c b/drivers/scsi/ips.c index ef683f0..457d76a 100644 --- a/drivers/scsi/ips.c +++ b/drivers/scsi/ips.c @@ -1004,8 +1004,7 @@ static int __ips_eh_reset(struct scsi_cmnd *SC) DEBUG_VAR(1, "(%s%d) Failing active commands", ips_name, ha->host_num); while ((scb = ips_removeq_scb_head(&ha->scb_activelist))) { - scb->scsi_cmd->result = - (DID_RESET << 16) | (SUGGEST_RETRY << 24); + scb->scsi_cmd->result = DID_RESET << 16; scb->scsi_cmd->scsi_done(scb->scsi_cmd); ips_freescb(ha, scb); } diff --git a/drivers/scsi/libfc/fc_fcp.c b/drivers/scsi/libfc/fc_fcp.c index 2a631d7..a070e57 100644 --- a/drivers/scsi/libfc/fc_fcp.c +++ b/drivers/scsi/libfc/fc_fcp.c @@ -259,7 +259,7 @@ static void fc_fcp_retry_cmd(struct fc_fcp_pkt *fsp) } fsp->state &= ~FC_SRB_ABORT_PENDING; - fsp->io_status = SUGGEST_RETRY << 24; + fsp->io_status = 0; fsp->status_code = FC_ERROR; fc_fcp_complete_locked(fsp); } @@ -859,7 +859,7 @@ static void fc_fcp_complete_locked(struct fc_fcp_pkt *fsp) (!(fsp->scsi_comp_flags & FCP_RESID_UNDER) || fsp->xfer_len < fsp->data_len - fsp->scsi_resid)) { fsp->status_code = FC_DATA_UNDRUN; - fsp->io_status = SUGGEST_RETRY << 24; + fsp->io_status = 0; } } @@ -1267,7 +1267,7 @@ static void fc_fcp_rec(struct fc_fcp_pkt *fsp) rp = rport->dd_data; if (!fsp->seq_ptr || rp->rp_state != RPORT_ST_READY) { fsp->status_code = FC_HRD_ERROR; - fsp->io_status = SUGGEST_RETRY << 24; + fsp->io_status = 0; fc_fcp_complete_locked(fsp); return; } diff --git a/drivers/scsi/lpfc/lpfc_scsi.c b/drivers/scsi/lpfc/lpfc_scsi.c index b103b6e..b1bd3fc 100644 --- a/drivers/scsi/lpfc/lpfc_scsi.c +++ b/drivers/scsi/lpfc/lpfc_scsi.c @@ -1357,7 +1357,7 @@ lpfc_parse_bg_err(struct lpfc_hba *phba, struct lpfc_scsi_buf *lpfc_cmd, scsi_build_sense_buffer(1, cmd->sense_buffer, ILLEGAL_REQUEST, 0x10, 0x1); - cmd->result = (DRIVER_SENSE|SUGGEST_DIE) << 24 + cmd->result = DRIVER_SENSE << 24 | ScsiResult(DID_ABORT, SAM_STAT_CHECK_CONDITION); phba->bg_guard_err_cnt++; printk(KERN_ERR "BLKGRD: guard_tag error\n"); @@ -1368,7 +1368,7 @@ lpfc_parse_bg_err(struct lpfc_hba *phba, struct lpfc_scsi_buf *lpfc_cmd, scsi_build_sense_buffer(1, cmd->sense_buffer, ILLEGAL_REQUEST, 0x10, 0x3); - cmd->result = (DRIVER_SENSE|SUGGEST_DIE) << 24 + cmd->result = DRIVER_SENSE << 24 | ScsiResult(DID_ABORT, SAM_STAT_CHECK_CONDITION); phba->bg_reftag_err_cnt++; @@ -1380,7 +1380,7 @@ lpfc_parse_bg_err(struct lpfc_hba *phba, struct lpfc_scsi_buf *lpfc_cmd, scsi_build_sense_buffer(1, cmd->sense_buffer, ILLEGAL_REQUEST, 0x10, 0x2); - cmd->result = (DRIVER_SENSE|SUGGEST_DIE) << 24 + cmd->result = DRIVER_SENSE << 24 | ScsiResult(DID_ABORT, SAM_STAT_CHECK_CONDITION); phba->bg_apptag_err_cnt++; diff --git a/drivers/scsi/st.c b/drivers/scsi/st.c index c6f19ee..eb24efe 100644 --- a/drivers/scsi/st.c +++ b/drivers/scsi/st.c @@ -374,9 +374,9 @@ static int st_chk_result(struct scsi_tape *STp, struct st_request * SRpnt) if (!debugging) { /* Abnormal conditions for tape */ if (!cmdstatp->have_sense) printk(KERN_WARNING - "%s: Error %x (sugg. bt 0x%x, driver bt 0x%x, host bt 0x%x).\n", - name, result, suggestion(result), - driver_byte(result) & DRIVER_MASK, host_byte(result)); + "%s: Error %x (driver bt 0x%x, host bt 0x%x).\n", + name, result, driver_byte(result), + host_byte(result)); else if (cmdstatp->have_sense && scode != NO_SENSE && scode != RECOVERED_ERROR && diff --git a/drivers/usb/storage/transport.c b/drivers/usb/storage/transport.c index fb65d221..02e30a3 100644 --- a/drivers/usb/storage/transport.c +++ b/drivers/usb/storage/transport.c @@ -781,7 +781,7 @@ void usb_stor_invoke_transport(struct scsi_cmnd *srb, struct us_data *us) /* Did we transfer less than the minimum amount required? */ if ((srb->result == SAM_STAT_GOOD || srb->sense_buffer[2] == 0) && scsi_bufflen(srb) - scsi_get_resid(srb) < srb->underflow) - srb->result = (DID_ERROR << 16) | (SUGGEST_RETRY << 24); + srb->result = DID_ERROR << 16; last_sector_hacks(us, srb); return; diff --git a/include/scsi/scsi.h b/include/scsi/scsi.h index a109165..815d404 100644 --- a/include/scsi/scsi.h +++ b/include/scsi/scsi.h @@ -402,16 +402,6 @@ static inline int scsi_is_wlun(unsigned int lun) #define DRIVER_HARD 0x07 #define DRIVER_SENSE 0x08 -#define SUGGEST_RETRY 0x10 -#define SUGGEST_ABORT 0x20 -#define SUGGEST_REMAP 0x30 -#define SUGGEST_DIE 0x40 -#define SUGGEST_SENSE 0x80 -#define SUGGEST_IS_OK 0xff - -#define DRIVER_MASK 0x0f -#define SUGGEST_MASK 0xf0 - /* * Internal return values. */ @@ -447,7 +437,6 @@ static inline int scsi_is_wlun(unsigned int lun) #define msg_byte(result) (((result) >> 8) & 0xff) #define host_byte(result) (((result) >> 16) & 0xff) #define driver_byte(result) (((result) >> 24) & 0xff) -#define suggestion(result) (driver_byte(result) & SUGGEST_MASK) static inline void set_msg_byte(struct scsi_cmnd *cmd, char status) { -- cgit v0.10.2 From a4976d688650b4593831fbffbb217f2d916b1aa0 Mon Sep 17 00:00:00 2001 From: James Bottomley Date: Sun, 25 Jan 2009 15:09:42 -0600 Subject: [SCSI] osst: Remove SUGGEST flags Fix up remaining bit of SUGGEST flag removal done by patch commit 0f10274300857d98ea5ea4c800c561a9ad9ac89f Author: Martin K. Petersen Date: Sun Jan 4 03:14:11 2009 -0500 [SCSI] Remove SUGGEST flags Signed-off-by: James Bottomley diff --git a/drivers/scsi/osst.c b/drivers/scsi/osst.c index 0ea78d9..8f21cbb 100644 --- a/drivers/scsi/osst.c +++ b/drivers/scsi/osst.c @@ -280,8 +280,8 @@ static int osst_chk_result(struct osst_tape * STp, struct osst_request * SRpnt) static int notyetprinted = 1; printk(KERN_WARNING - "%s:W: Warning %x (sugg. bt 0x%x, driver bt 0x%x, host bt 0x%x).\n", - name, result, suggestion(result), driver_byte(result) & DRIVER_MASK, + "%s:W: Warning %x (driver bt 0x%x, host bt 0x%x).\n", + name, result, driver_byte(result), host_byte(result)); if (notyetprinted) { notyetprinted = 0; -- cgit v0.10.2 From dd48ebf7ca4a6e60e6787e443f5316724309865b Mon Sep 17 00:00:00 2001 From: Ed Lin - PTU Date: Mon, 26 Jan 2009 02:40:11 -0800 Subject: [SCSI] stex: Fix for potential invalid response The interrupt routine is good for normal cases. However, if the firmware is abnormal and returns an invalid response, the driver may reuse a ccb structure that has already been handled. This may cause problem. Fix this by setting the req member to NULL. Next time we know the response is invalid and handle accordingly if req is NULL. Signed-off-by: Ed Lin Signed-off-by: James Bottomley diff --git a/drivers/scsi/stex.c b/drivers/scsi/stex.c index a3a18ad..6129db4 100644 --- a/drivers/scsi/stex.c +++ b/drivers/scsi/stex.c @@ -746,6 +746,7 @@ static void stex_mu_intr(struct st_hba *hba, u32 doorbell) stex_copy_data(ccb, resp, size); } + ccb->req = NULL; ccb->srb_status = resp->srb_status; ccb->scsi_status = resp->scsi_status; -- cgit v0.10.2 From 62e5b3d850f76190633e5a3cc8d6cc611ef96cfc Mon Sep 17 00:00:00 2001 From: Ed Lin - PTU Date: Mon, 26 Jan 2009 02:40:29 -0800 Subject: [SCSI] stex: Add new device id Add new device id for controller type st_seq. Signed-off-by: Ed Lin Signed-off-by: James Bottomley diff --git a/drivers/scsi/stex.c b/drivers/scsi/stex.c index 6129db4..12dc0d1 100644 --- a/drivers/scsi/stex.c +++ b/drivers/scsi/stex.c @@ -119,6 +119,7 @@ enum { st_vsc = 1, st_vsc1 = 2, st_yosemite = 3, + st_seq = 4, PASSTHRU_REQ_TYPE = 0x00000001, PASSTHRU_REQ_NO_WAKEUP = 0x00000100, @@ -1127,7 +1128,7 @@ stex_probe(struct pci_dev *pdev, const struct pci_device_id *id) hba->cardtype = (unsigned int) id->driver_data; if (hba->cardtype == st_vsc && (pdev->subsystem_device & 0xf) == 0x1) hba->cardtype = st_vsc1; - hba->dma_size = (hba->cardtype == st_vsc1) ? + hba->dma_size = (hba->cardtype == st_vsc1 || hba->cardtype == st_seq) ? (STEX_BUFFER_SIZE + ST_ADDITIONAL_MEM) : (STEX_BUFFER_SIZE); hba->dma_mem = dma_alloc_coherent(&pdev->dev, hba->dma_size, &hba->dma_handle, GFP_KERNEL); @@ -1150,7 +1151,7 @@ stex_probe(struct pci_dev *pdev, const struct pci_device_id *id) host->max_lun = 128; host->max_id = 1 + 1; } else { - /* st_vsc and st_vsc1 */ + /* st_vsc , st_vsc1 and st_seq */ host->max_lun = 1; host->max_id = 128 + 1; } @@ -1312,6 +1313,9 @@ static struct pci_device_id stex_pci_tbl[] = { st_yosemite }, /* SuperTrak EX8654 */ { 0x105a, 0x8650, PCI_ANY_ID, PCI_ANY_ID, 0, 0, st_yosemite }, /* generic st_yosemite */ + + /* st_seq */ + { 0x105a, 0x3360, PCI_ANY_ID, PCI_ANY_ID, 0, 0, st_seq }, { } /* terminate list */ }; MODULE_DEVICE_TABLE(pci, stex_pci_tbl); -- cgit v0.10.2 From e8a091b36cd50faa1276e6934edcc3e8b8e83b5a Mon Sep 17 00:00:00 2001 From: Ed Lin - PTU Date: Mon, 26 Jan 2009 02:40:50 -0800 Subject: [SCSI] stex: Fix for controller type st_yosemite This is the fix for controller type st_yosemite, including - max_lun is 256 (backward compatible) - remove unneeded special handling of INQUIRY - remove unnecessary listing of sub device ids Signed-off-by: Ed Lin Signed-off-by: James Bottomley diff --git a/drivers/scsi/stex.c b/drivers/scsi/stex.c index 12dc0d1..425a61c 100644 --- a/drivers/scsi/stex.c +++ b/drivers/scsi/stex.c @@ -153,35 +153,6 @@ enum { ST_ADDITIONAL_MEM = 0x200000, }; -/* SCSI inquiry data */ -typedef struct st_inq { - u8 DeviceType :5; - u8 DeviceTypeQualifier :3; - u8 DeviceTypeModifier :7; - u8 RemovableMedia :1; - u8 Versions; - u8 ResponseDataFormat :4; - u8 HiSupport :1; - u8 NormACA :1; - u8 ReservedBit :1; - u8 AERC :1; - u8 AdditionalLength; - u8 Reserved[2]; - u8 SoftReset :1; - u8 CommandQueue :1; - u8 Reserved2 :1; - u8 LinkedCommands :1; - u8 Synchronous :1; - u8 Wide16Bit :1; - u8 Wide32Bit :1; - u8 RelativeAddressing :1; - u8 VendorId[8]; - u8 ProductId[16]; - u8 ProductRevisionLevel[4]; - u8 VendorSpecific[20]; - u8 Reserved3[40]; -} ST_INQ; - struct st_sgitem { u8 ctrl; /* SG_CF_xxx */ u8 reserved[3]; @@ -285,7 +256,7 @@ struct st_drvver { #define MU_REQ_BUFFER_SIZE (MU_REQ_COUNT * sizeof(struct req_msg)) #define MU_STATUS_BUFFER_SIZE (MU_STATUS_COUNT * sizeof(struct status_msg)) #define MU_BUFFER_SIZE (MU_REQ_BUFFER_SIZE + MU_STATUS_BUFFER_SIZE) -#define STEX_EXTRA_SIZE max(sizeof(struct st_frame), sizeof(ST_INQ)) +#define STEX_EXTRA_SIZE sizeof(struct st_frame) #define STEX_BUFFER_SIZE (MU_BUFFER_SIZE + STEX_EXTRA_SIZE) struct st_ccb { @@ -662,24 +633,6 @@ static void stex_ys_commands(struct st_hba *hba, resp->scsi_status != SAM_STAT_CHECK_CONDITION) { scsi_set_resid(ccb->cmd, scsi_bufflen(ccb->cmd) - le32_to_cpu(*(__le32 *)&resp->variable[0])); - return; - } - - if (resp->srb_status != 0) - return; - - /* determine inquiry command status by DeviceTypeQualifier */ - if (ccb->cmd->cmnd[0] == INQUIRY && - resp->scsi_status == SAM_STAT_GOOD) { - ST_INQ *inq_data; - - scsi_sg_copy_to_buffer(ccb->cmd, hba->copy_buffer, - STEX_EXTRA_SIZE); - inq_data = (ST_INQ *)hba->copy_buffer; - if (inq_data->DeviceTypeQualifier != 0) - ccb->srb_status = SRB_STATUS_SELECTION_TIMEOUT; - else - ccb->srb_status = SRB_STATUS_SUCCESS; } } @@ -1148,7 +1101,7 @@ stex_probe(struct pci_dev *pdev, const struct pci_device_id *id) host->max_lun = 8; host->max_id = 16 + 1; } else if (hba->cardtype == st_yosemite) { - host->max_lun = 128; + host->max_lun = 256; host->max_id = 1 + 1; } else { /* st_vsc , st_vsc1 and st_seq */ @@ -1301,18 +1254,7 @@ static struct pci_device_id stex_pci_tbl[] = { { 0x105a, 0x7250, PCI_ANY_ID, PCI_ANY_ID, 0, 0, st_vsc }, /* st_yosemite */ - { 0x105a, 0x8650, PCI_ANY_ID, 0x4600, 0, 0, - st_yosemite }, /* SuperTrak EX4650 */ - { 0x105a, 0x8650, PCI_ANY_ID, 0x4610, 0, 0, - st_yosemite }, /* SuperTrak EX4650o */ - { 0x105a, 0x8650, PCI_ANY_ID, 0x8600, 0, 0, - st_yosemite }, /* SuperTrak EX8650EL */ - { 0x105a, 0x8650, PCI_ANY_ID, 0x8601, 0, 0, - st_yosemite }, /* SuperTrak EX8650 */ - { 0x105a, 0x8650, PCI_ANY_ID, 0x8602, 0, 0, - st_yosemite }, /* SuperTrak EX8654 */ - { 0x105a, 0x8650, PCI_ANY_ID, PCI_ANY_ID, 0, 0, - st_yosemite }, /* generic st_yosemite */ + { 0x105a, 0x8650, PCI_ANY_ID, PCI_ANY_ID, 0, 0, st_yosemite }, /* st_seq */ { 0x105a, 0x3360, PCI_ANY_ID, PCI_ANY_ID, 0, 0, st_seq }, -- cgit v0.10.2 From 7cfe99a526b92e30df19673b3533f827bbe93821 Mon Sep 17 00:00:00 2001 From: Ed Lin - PTU Date: Mon, 26 Jan 2009 02:41:53 -0800 Subject: [SCSI] stex: Small fixes Some small fixes, including: - add data direction in req_msg because new firmware version may require this (backward compatible) - change internal timeout value - change judgment of type st_vsc1 - blank line handling, etc. Signed-off-by: Ed Lin Signed-off-by: James Bottomley diff --git a/drivers/scsi/stex.c b/drivers/scsi/stex.c index 425a61c..c1a79c3 100644 --- a/drivers/scsi/stex.c +++ b/drivers/scsi/stex.c @@ -103,7 +103,7 @@ enum { MU_REQ_COUNT = (MU_MAX_REQUEST + 1), MU_STATUS_COUNT = (MU_MAX_REQUEST + 1), - STEX_CDB_LENGTH = MAX_COMMAND_SIZE, + STEX_CDB_LENGTH = 16, REQ_VARIABLE_LEN = 1024, STATUS_VAR_LEN = 128, ST_CAN_QUEUE = MU_MAX_REQUEST, @@ -114,6 +114,9 @@ enum { SG_CF_EOT = 0x80, /* end of table */ SG_CF_64B = 0x40, /* 64 bit item */ SG_CF_HOST = 0x20, /* sg in host memory */ + MSG_DATA_DIR_ND = 0, + MSG_DATA_DIR_IN = 1, + MSG_DATA_DIR_OUT = 2, st_shasta = 0, st_vsc = 1, @@ -123,7 +126,7 @@ enum { PASSTHRU_REQ_TYPE = 0x00000001, PASSTHRU_REQ_NO_WAKEUP = 0x00000100, - ST_INTERNAL_TIMEOUT = 30, + ST_INTERNAL_TIMEOUT = 180, ST_TO_CMD = 0, ST_FROM_CMD = 1, @@ -194,7 +197,7 @@ struct req_msg { u8 target; u8 task_attr; u8 task_manage; - u8 prd_entry; + u8 data_dir; u8 payload_sz; /* payload size in 4-byte, not used */ u8 cdb[STEX_CDB_LENGTH]; u8 variable[REQ_VARIABLE_LEN]; @@ -318,8 +321,8 @@ MODULE_VERSION(ST_DRIVER_VERSION); static void stex_gettime(__le32 *time) { struct timeval tv; - do_gettimeofday(&tv); + do_gettimeofday(&tv); *time = cpu_to_le32(tv.tv_sec & 0xffffffff); *(time + 1) = cpu_to_le32((tv.tv_sec >> 16) >> 16); } @@ -340,7 +343,7 @@ static void stex_invalid_field(struct scsi_cmnd *cmd, { cmd->result = (DRIVER_SENSE << 24) | SAM_STAT_CHECK_CONDITION; - /* "Invalid field in cbd" */ + /* "Invalid field in cdb" */ scsi_build_sense_buffer(0, cmd->sense_buffer, ILLEGAL_REQUEST, 0x24, 0x0); done(cmd); @@ -469,6 +472,7 @@ stex_queuecommand(struct scsi_cmnd *cmd, void (* done)(struct scsi_cmnd *)) unsigned int id,lun; struct req_msg *req; u16 tag; + host = cmd->device->host; id = cmd->device->id; lun = cmd->device->lun; @@ -480,6 +484,7 @@ stex_queuecommand(struct scsi_cmnd *cmd, void (* done)(struct scsi_cmnd *)) static char ms10_caching_page[12] = { 0, 0x12, 0, 0, 0, 0, 0, 0, 0x8, 0xa, 0x4, 0 }; unsigned char page; + page = cmd->cmnd[2] & 0x3f; if (page == 0x8 || page == 0x3f) { scsi_sg_copy_from_buffer(cmd, ms10_caching_page, @@ -523,6 +528,7 @@ stex_queuecommand(struct scsi_cmnd *cmd, void (* done)(struct scsi_cmnd *)) if (cmd->cmnd[1] == PASSTHRU_GET_DRVVER) { struct st_drvver ver; size_t cp_len = sizeof(ver); + ver.major = ST_VER_MAJOR; ver.minor = ST_VER_MINOR; ver.oem = ST_OEM; @@ -556,6 +562,13 @@ stex_queuecommand(struct scsi_cmnd *cmd, void (* done)(struct scsi_cmnd *)) /* cdb */ memcpy(req->cdb, cmd->cmnd, STEX_CDB_LENGTH); + if (cmd->sc_data_direction == DMA_FROM_DEVICE) + req->data_dir = MSG_DATA_DIR_IN; + else if (cmd->sc_data_direction == DMA_TO_DEVICE) + req->data_dir = MSG_DATA_DIR_OUT; + else + req->data_dir = MSG_DATA_DIR_ND; + hba->ccb[tag].cmd = cmd; hba->ccb[tag].sense_bufflen = SCSI_SENSE_BUFFERSIZE; hba->ccb[tag].sense_buffer = cmd->sense_buffer; @@ -614,6 +627,7 @@ static void stex_copy_data(struct st_ccb *ccb, struct status_msg *resp, unsigned int variable) { size_t count = variable; + if (resp->scsi_status != SAM_STAT_GOOD) { if (ccb->sense_buffer != NULL) memcpy(ccb->sense_buffer, resp->variable, @@ -938,6 +952,7 @@ static int stex_reset(struct scsi_cmnd *cmd) struct st_hba *hba; unsigned long flags; unsigned long before; + hba = (struct st_hba *) &cmd->device->host->hostdata[0]; printk(KERN_INFO DRV_NAME @@ -1022,6 +1037,7 @@ static struct scsi_host_template driver_template = { static int stex_set_dma_mask(struct pci_dev * pdev) { int ret; + if (!pci_set_dma_mask(pdev, DMA_64BIT_MASK) && !pci_set_consistent_dma_mask(pdev, DMA_64BIT_MASK)) return 0; @@ -1079,7 +1095,7 @@ stex_probe(struct pci_dev *pdev, const struct pci_device_id *id) } hba->cardtype = (unsigned int) id->driver_data; - if (hba->cardtype == st_vsc && (pdev->subsystem_device & 0xf) == 0x1) + if (hba->cardtype == st_vsc && (pdev->subsystem_device & 1)) hba->cardtype = st_vsc1; hba->dma_size = (hba->cardtype == st_vsc1 || hba->cardtype == st_seq) ? (STEX_BUFFER_SIZE + ST_ADDITIONAL_MEM) : (STEX_BUFFER_SIZE); -- cgit v0.10.2 From bd5cd9cdc5379088b7e4e9a1757a1d101223a005 Mon Sep 17 00:00:00 2001 From: Ed Lin - PTU Date: Mon, 26 Jan 2009 02:42:11 -0800 Subject: [SCSI] stex: Version update Update version to 4.6.0000.1 Signed-off-by: Ed Lin Signed-off-by: James Bottomley diff --git a/drivers/scsi/stex.c b/drivers/scsi/stex.c index c1a79c3..47b614e 100644 --- a/drivers/scsi/stex.c +++ b/drivers/scsi/stex.c @@ -1,7 +1,7 @@ /* * SuperTrak EX Series Storage Controller driver for Linux * - * Copyright (C) 2005, 2006 Promise Technology Inc. + * Copyright (C) 2005-2009 Promise Technology Inc. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License @@ -36,8 +36,8 @@ #include #define DRV_NAME "stex" -#define ST_DRIVER_VERSION "3.6.0000.1" -#define ST_VER_MAJOR 3 +#define ST_DRIVER_VERSION "4.6.0000.1" +#define ST_VER_MAJOR 4 #define ST_VER_MINOR 6 #define ST_OEM 0 #define ST_BUILD_VER 1 -- cgit v0.10.2 From c6517b7942fad663cc1cf3235cbe4207cf769332 Mon Sep 17 00:00:00 2001 From: Tony Battersby Date: Wed, 21 Jan 2009 14:45:50 -0500 Subject: [SCSI] sg: fix races during device removal sg has the following problems related to device removal: * opening a sg fd races with removing a device * closing a sg fd races with removing a device * /proc/scsi/sg/* access races with removing a device * command completion races with removing a device * command completion races with closing a sg fd * can rmmod sg with active commands These problems can cause kernel oopses, memory-use-after-free, or double-free errors. This patch fixes these problems by using krefs to manage the lifetime of sg_device and sg_fd. Each command submitted to the midlevel holds a reference to sg_fd until the completion callback. This ensures that sg_fd doesn't go away if the fd is closed with commands still outstanding. sg_fd gets the reference of sg_device (with scsi_device) and also makes sure that the sg module doesn't go away. /proc/scsi/sg/* functions don't play nicely with krefs because they give information about sg_fds which have been closed but not yet freed due to still having outstanding commands and sg_devices which have been removed but not yet freed due to still being referenced by one or more sg_fds. To deal with this safely without removing functionality, /proc functions now access sg_device and sg_fd while holding a lock instead of using kref_get()/kref_put(). Signed-off-by: Tony Battersby Acked-by: Douglas Gilbert Signed-off-by: James Bottomley diff --git a/drivers/scsi/sg.c b/drivers/scsi/sg.c index 516925d..b447527 100644 --- a/drivers/scsi/sg.c +++ b/drivers/scsi/sg.c @@ -101,6 +101,7 @@ static int scatter_elem_sz_prev = SG_SCATTER_SZ; #define SG_SECTOR_MSK (SG_SECTOR_SZ - 1) static int sg_add(struct device *, struct class_interface *); +static void sg_device_destroy(struct kref *kref); static void sg_remove(struct device *, struct class_interface *); static DEFINE_IDR(sg_index_idr); @@ -158,6 +159,8 @@ typedef struct sg_fd { /* holds the state of a file descriptor */ char next_cmd_len; /* 0 -> automatic (def), >0 -> use on next write() */ char keep_orphan; /* 0 -> drop orphan (def), 1 -> keep for read() */ char mmap_called; /* 0 -> mmap() never called on this fd */ + struct kref f_ref; + struct execute_work ew; } Sg_fd; typedef struct sg_device { /* holds the state of each scsi generic device */ @@ -171,6 +174,7 @@ typedef struct sg_device { /* holds the state of each scsi generic device */ char sgdebug; /* 0->off, 1->sense, 9->dump dev, 10-> all devs */ struct gendisk *disk; struct cdev * cdev; /* char_dev [sysfs: /sys/cdev/major/sg] */ + struct kref d_ref; } Sg_device; static int sg_fasync(int fd, struct file *filp, int mode); @@ -194,13 +198,14 @@ static void sg_build_reserve(Sg_fd * sfp, int req_size); static void sg_link_reserve(Sg_fd * sfp, Sg_request * srp, int size); static void sg_unlink_reserve(Sg_fd * sfp, Sg_request * srp); static Sg_fd *sg_add_sfp(Sg_device * sdp, int dev); -static int sg_remove_sfp(Sg_device * sdp, Sg_fd * sfp); -static void __sg_remove_sfp(Sg_device * sdp, Sg_fd * sfp); +static void sg_remove_sfp(struct kref *); static Sg_request *sg_get_rq_mark(Sg_fd * sfp, int pack_id); static Sg_request *sg_add_request(Sg_fd * sfp); static int sg_remove_request(Sg_fd * sfp, Sg_request * srp); static int sg_res_in_use(Sg_fd * sfp); +static Sg_device *sg_lookup_dev(int dev); static Sg_device *sg_get_dev(int dev); +static void sg_put_dev(Sg_device *sdp); #ifdef CONFIG_SCSI_PROC_FS static int sg_last_dev(void); #endif @@ -237,22 +242,17 @@ sg_open(struct inode *inode, struct file *filp) nonseekable_open(inode, filp); SCSI_LOG_TIMEOUT(3, printk("sg_open: dev=%d, flags=0x%x\n", dev, flags)); sdp = sg_get_dev(dev); - if ((!sdp) || (!sdp->device)) { - unlock_kernel(); - return -ENXIO; - } - if (sdp->detached) { - unlock_kernel(); - return -ENODEV; + if (IS_ERR(sdp)) { + retval = PTR_ERR(sdp); + sdp = NULL; + goto sg_put; } /* This driver's module count bumped by fops_get in */ /* Prevent the device driver from vanishing while we sleep */ retval = scsi_device_get(sdp->device); - if (retval) { - unlock_kernel(); - return retval; - } + if (retval) + goto sg_put; if (!((flags & O_NONBLOCK) || scsi_block_when_processing_errors(sdp->device))) { @@ -303,16 +303,20 @@ sg_open(struct inode *inode, struct file *filp) if ((sfp = sg_add_sfp(sdp, dev))) filp->private_data = sfp; else { - if (flags & O_EXCL) + if (flags & O_EXCL) { sdp->exclude = 0; /* undo if error */ + wake_up_interruptible(&sdp->o_excl_wait); + } retval = -ENOMEM; goto error_out; } - unlock_kernel(); - return 0; - - error_out: - scsi_device_put(sdp->device); + retval = 0; +error_out: + if (retval) + scsi_device_put(sdp->device); +sg_put: + if (sdp) + sg_put_dev(sdp); unlock_kernel(); return retval; } @@ -327,13 +331,13 @@ sg_release(struct inode *inode, struct file *filp) if ((!(sfp = (Sg_fd *) filp->private_data)) || (!(sdp = sfp->parentdp))) return -ENXIO; SCSI_LOG_TIMEOUT(3, printk("sg_release: %s\n", sdp->disk->disk_name)); - if (0 == sg_remove_sfp(sdp, sfp)) { /* Returns 1 when sdp gone */ - if (!sdp->detached) { - scsi_device_put(sdp->device); - } - sdp->exclude = 0; - wake_up_interruptible(&sdp->o_excl_wait); - } + + sfp->closed = 1; + + sdp->exclude = 0; + wake_up_interruptible(&sdp->o_excl_wait); + + kref_put(&sfp->f_ref, sg_remove_sfp); return 0; } @@ -755,6 +759,7 @@ sg_common_write(Sg_fd * sfp, Sg_request * srp, hp->duration = jiffies_to_msecs(jiffies); srp->rq->timeout = timeout; + kref_get(&sfp->f_ref); /* sg_rq_end_io() does kref_put(). */ blk_execute_rq_nowait(sdp->device->request_queue, sdp->disk, srp->rq, 1, sg_rq_end_io); return 0; @@ -1247,24 +1252,23 @@ sg_mmap(struct file *filp, struct vm_area_struct *vma) static void sg_rq_end_io(struct request *rq, int uptodate) { struct sg_request *srp = rq->end_io_data; - Sg_device *sdp = NULL; + Sg_device *sdp; Sg_fd *sfp; unsigned long iflags; unsigned int ms; char *sense; - int result, resid; + int result, resid, done = 1; - if (NULL == srp) { - printk(KERN_ERR "sg_cmd_done: NULL request\n"); + if (WARN_ON(srp->done != 0)) return; - } + sfp = srp->parentfp; - if (sfp) - sdp = sfp->parentdp; - if ((NULL == sdp) || sdp->detached) { - printk(KERN_INFO "sg_cmd_done: device detached\n"); + if (WARN_ON(sfp == NULL)) return; - } + + sdp = sfp->parentdp; + if (unlikely(sdp->detached)) + printk(KERN_INFO "sg_rq_end_io: device detached\n"); sense = rq->sense; result = rq->errors; @@ -1303,33 +1307,26 @@ static void sg_rq_end_io(struct request *rq, int uptodate) } /* Rely on write phase to clean out srp status values, so no "else" */ - if (sfp->closed) { /* whoops this fd already released, cleanup */ - SCSI_LOG_TIMEOUT(1, printk("sg_cmd_done: already closed, freeing ...\n")); - sg_finish_rem_req(srp); - srp = NULL; - if (NULL == sfp->headrp) { - SCSI_LOG_TIMEOUT(1, printk("sg_cmd_done: already closed, final cleanup\n")); - if (0 == sg_remove_sfp(sdp, sfp)) { /* device still present */ - scsi_device_put(sdp->device); - } - sfp = NULL; - } - } else if (srp && srp->orphan) { + write_lock_irqsave(&sfp->rq_list_lock, iflags); + if (unlikely(srp->orphan)) { if (sfp->keep_orphan) srp->sg_io_owned = 0; - else { - sg_finish_rem_req(srp); - srp = NULL; - } + else + done = 0; } - if (sfp && srp) { - /* Now wake up any sg_read() that is waiting for this packet. */ - kill_fasync(&sfp->async_qp, SIGPOLL, POLL_IN); - write_lock_irqsave(&sfp->rq_list_lock, iflags); - srp->done = 1; + srp->done = done; + write_unlock_irqrestore(&sfp->rq_list_lock, iflags); + + if (likely(done)) { + /* Now wake up any sg_read() that is waiting for this + * packet. + */ wake_up_interruptible(&sfp->read_wait); - write_unlock_irqrestore(&sfp->rq_list_lock, iflags); - } + kill_fasync(&sfp->async_qp, SIGPOLL, POLL_IN); + } else + sg_finish_rem_req(srp); /* call with srp->done == 0 */ + + kref_put(&sfp->f_ref, sg_remove_sfp); } static struct file_operations sg_fops = { @@ -1364,17 +1361,18 @@ static Sg_device *sg_alloc(struct gendisk *disk, struct scsi_device *scsidp) printk(KERN_WARNING "kmalloc Sg_device failure\n"); return ERR_PTR(-ENOMEM); } - error = -ENOMEM; + if (!idr_pre_get(&sg_index_idr, GFP_KERNEL)) { printk(KERN_WARNING "idr expansion Sg_device failure\n"); + error = -ENOMEM; goto out; } write_lock_irqsave(&sg_index_lock, iflags); - error = idr_get_new(&sg_index_idr, sdp, &k); - write_unlock_irqrestore(&sg_index_lock, iflags); + error = idr_get_new(&sg_index_idr, sdp, &k); if (error) { + write_unlock_irqrestore(&sg_index_lock, iflags); printk(KERN_WARNING "idr allocation Sg_device failure: %d\n", error); goto out; @@ -1391,6 +1389,9 @@ static Sg_device *sg_alloc(struct gendisk *disk, struct scsi_device *scsidp) init_waitqueue_head(&sdp->o_excl_wait); sdp->sg_tablesize = min(q->max_hw_segments, q->max_phys_segments); sdp->index = k; + kref_init(&sdp->d_ref); + + write_unlock_irqrestore(&sg_index_lock, iflags); error = 0; out: @@ -1401,6 +1402,8 @@ static Sg_device *sg_alloc(struct gendisk *disk, struct scsi_device *scsidp) return sdp; overflow: + idr_remove(&sg_index_idr, k); + write_unlock_irqrestore(&sg_index_lock, iflags); sdev_printk(KERN_WARNING, scsidp, "Unable to attach sg device type=%d, minor " "number exceeds %d\n", scsidp->type, SG_MAX_DEVS - 1); @@ -1488,49 +1491,46 @@ out: return error; } -static void -sg_remove(struct device *cl_dev, struct class_interface *cl_intf) +static void sg_device_destroy(struct kref *kref) +{ + struct sg_device *sdp = container_of(kref, struct sg_device, d_ref); + unsigned long flags; + + /* CAUTION! Note that the device can still be found via idr_find() + * even though the refcount is 0. Therefore, do idr_remove() BEFORE + * any other cleanup. + */ + + write_lock_irqsave(&sg_index_lock, flags); + idr_remove(&sg_index_idr, sdp->index); + write_unlock_irqrestore(&sg_index_lock, flags); + + SCSI_LOG_TIMEOUT(3, + printk("sg_device_destroy: %s\n", + sdp->disk->disk_name)); + + put_disk(sdp->disk); + kfree(sdp); +} + +static void sg_remove(struct device *cl_dev, struct class_interface *cl_intf) { struct scsi_device *scsidp = to_scsi_device(cl_dev->parent); Sg_device *sdp = dev_get_drvdata(cl_dev); unsigned long iflags; Sg_fd *sfp; - Sg_fd *tsfp; - Sg_request *srp; - Sg_request *tsrp; - int delay; - if (!sdp) + if (!sdp || sdp->detached) return; - delay = 0; + SCSI_LOG_TIMEOUT(3, printk("sg_remove: %s\n", sdp->disk->disk_name)); + + /* Need a write lock to set sdp->detached. */ write_lock_irqsave(&sg_index_lock, iflags); - if (sdp->headfp) { - sdp->detached = 1; - for (sfp = sdp->headfp; sfp; sfp = tsfp) { - tsfp = sfp->nextfp; - for (srp = sfp->headrp; srp; srp = tsrp) { - tsrp = srp->nextrp; - if (sfp->closed || (0 == sg_srp_done(srp, sfp))) - sg_finish_rem_req(srp); - } - if (sfp->closed) { - scsi_device_put(sdp->device); - __sg_remove_sfp(sdp, sfp); - } else { - delay = 1; - wake_up_interruptible(&sfp->read_wait); - kill_fasync(&sfp->async_qp, SIGPOLL, - POLL_HUP); - } - } - SCSI_LOG_TIMEOUT(3, printk("sg_remove: dev=%d, dirty\n", sdp->index)); - if (NULL == sdp->headfp) { - idr_remove(&sg_index_idr, sdp->index); - } - } else { /* nothing active, simple case */ - SCSI_LOG_TIMEOUT(3, printk("sg_remove: dev=%d\n", sdp->index)); - idr_remove(&sg_index_idr, sdp->index); + sdp->detached = 1; + for (sfp = sdp->headfp; sfp; sfp = sfp->nextfp) { + wake_up_interruptible(&sfp->read_wait); + kill_fasync(&sfp->async_qp, SIGPOLL, POLL_HUP); } write_unlock_irqrestore(&sg_index_lock, iflags); @@ -1538,13 +1538,8 @@ sg_remove(struct device *cl_dev, struct class_interface *cl_intf) device_destroy(sg_sysfs_class, MKDEV(SCSI_GENERIC_MAJOR, sdp->index)); cdev_del(sdp->cdev); sdp->cdev = NULL; - put_disk(sdp->disk); - sdp->disk = NULL; - if (NULL == sdp->headfp) - kfree(sdp); - if (delay) - msleep(10); /* dirty detach so delay device destruction */ + sg_put_dev(sdp); } module_param_named(scatter_elem_sz, scatter_elem_sz, int, S_IRUGO | S_IWUSR); @@ -1941,22 +1936,6 @@ sg_get_rq_mark(Sg_fd * sfp, int pack_id) return resp; } -#ifdef CONFIG_SCSI_PROC_FS -static Sg_request * -sg_get_nth_request(Sg_fd * sfp, int nth) -{ - Sg_request *resp; - unsigned long iflags; - int k; - - read_lock_irqsave(&sfp->rq_list_lock, iflags); - for (k = 0, resp = sfp->headrp; resp && (k < nth); - ++k, resp = resp->nextrp) ; - read_unlock_irqrestore(&sfp->rq_list_lock, iflags); - return resp; -} -#endif - /* always adds to end of list */ static Sg_request * sg_add_request(Sg_fd * sfp) @@ -2032,22 +2011,6 @@ sg_remove_request(Sg_fd * sfp, Sg_request * srp) return res; } -#ifdef CONFIG_SCSI_PROC_FS -static Sg_fd * -sg_get_nth_sfp(Sg_device * sdp, int nth) -{ - Sg_fd *resp; - unsigned long iflags; - int k; - - read_lock_irqsave(&sg_index_lock, iflags); - for (k = 0, resp = sdp->headfp; resp && (k < nth); - ++k, resp = resp->nextfp) ; - read_unlock_irqrestore(&sg_index_lock, iflags); - return resp; -} -#endif - static Sg_fd * sg_add_sfp(Sg_device * sdp, int dev) { @@ -2062,6 +2025,7 @@ sg_add_sfp(Sg_device * sdp, int dev) init_waitqueue_head(&sfp->read_wait); rwlock_init(&sfp->rq_list_lock); + kref_init(&sfp->f_ref); sfp->timeout = SG_DEFAULT_TIMEOUT; sfp->timeout_user = SG_DEFAULT_TIMEOUT_USER; sfp->force_packid = SG_DEF_FORCE_PACK_ID; @@ -2089,15 +2053,54 @@ sg_add_sfp(Sg_device * sdp, int dev) sg_build_reserve(sfp, bufflen); SCSI_LOG_TIMEOUT(3, printk("sg_add_sfp: bufflen=%d, k_use_sg=%d\n", sfp->reserve.bufflen, sfp->reserve.k_use_sg)); + + kref_get(&sdp->d_ref); + __module_get(THIS_MODULE); return sfp; } -static void -__sg_remove_sfp(Sg_device * sdp, Sg_fd * sfp) +static void sg_remove_sfp_usercontext(struct work_struct *work) +{ + struct sg_fd *sfp = container_of(work, struct sg_fd, ew.work); + struct sg_device *sdp = sfp->parentdp; + + /* Cleanup any responses which were never read(). */ + while (sfp->headrp) + sg_finish_rem_req(sfp->headrp); + + if (sfp->reserve.bufflen > 0) { + SCSI_LOG_TIMEOUT(6, + printk("sg_remove_sfp: bufflen=%d, k_use_sg=%d\n", + (int) sfp->reserve.bufflen, + (int) sfp->reserve.k_use_sg)); + sg_remove_scat(&sfp->reserve); + } + + SCSI_LOG_TIMEOUT(6, + printk("sg_remove_sfp: %s, sfp=0x%p\n", + sdp->disk->disk_name, + sfp)); + kfree(sfp); + + scsi_device_put(sdp->device); + sg_put_dev(sdp); + module_put(THIS_MODULE); +} + +static void sg_remove_sfp(struct kref *kref) { + struct sg_fd *sfp = container_of(kref, struct sg_fd, f_ref); + struct sg_device *sdp = sfp->parentdp; Sg_fd *fp; Sg_fd *prev_fp; + unsigned long iflags; + + /* CAUTION! Note that sfp can still be found by walking sdp->headfp + * even though the refcount is now 0. Therefore, unlink sfp from + * sdp->headfp BEFORE doing any other cleanup. + */ + write_lock_irqsave(&sg_index_lock, iflags); prev_fp = sdp->headfp; if (sfp == prev_fp) sdp->headfp = prev_fp->nextfp; @@ -2110,54 +2113,10 @@ __sg_remove_sfp(Sg_device * sdp, Sg_fd * sfp) prev_fp = fp; } } - if (sfp->reserve.bufflen > 0) { - SCSI_LOG_TIMEOUT(6, - printk("__sg_remove_sfp: bufflen=%d, k_use_sg=%d\n", - (int) sfp->reserve.bufflen, (int) sfp->reserve.k_use_sg)); - sg_remove_scat(&sfp->reserve); - } - sfp->parentdp = NULL; - SCSI_LOG_TIMEOUT(6, printk("__sg_remove_sfp: sfp=0x%p\n", sfp)); - kfree(sfp); -} - -/* Returns 0 in normal case, 1 when detached and sdp object removed */ -static int -sg_remove_sfp(Sg_device * sdp, Sg_fd * sfp) -{ - Sg_request *srp; - Sg_request *tsrp; - int dirty = 0; - int res = 0; - - for (srp = sfp->headrp; srp; srp = tsrp) { - tsrp = srp->nextrp; - if (sg_srp_done(srp, sfp)) - sg_finish_rem_req(srp); - else - ++dirty; - } - if (0 == dirty) { - unsigned long iflags; + write_unlock_irqrestore(&sg_index_lock, iflags); + wake_up_interruptible(&sdp->o_excl_wait); - write_lock_irqsave(&sg_index_lock, iflags); - __sg_remove_sfp(sdp, sfp); - if (sdp->detached && (NULL == sdp->headfp)) { - idr_remove(&sg_index_idr, sdp->index); - kfree(sdp); - res = 1; - } - write_unlock_irqrestore(&sg_index_lock, iflags); - } else { - /* MOD_INC's to inhibit unloading sg and associated adapter driver */ - /* only bump the access_count if we actually succeeded in - * throwing another counter on the host module */ - scsi_device_get(sdp->device); /* XXX: retval ignored? */ - sfp->closed = 1; /* flag dirty state on this fd */ - SCSI_LOG_TIMEOUT(1, printk("sg_remove_sfp: worrisome, %d writes pending\n", - dirty)); - } - return res; + execute_in_process_context(sg_remove_sfp_usercontext, &sfp->ew); } static int @@ -2199,19 +2158,38 @@ sg_last_dev(void) } #endif -static Sg_device * -sg_get_dev(int dev) +/* must be called with sg_index_lock held */ +static Sg_device *sg_lookup_dev(int dev) { - Sg_device *sdp; - unsigned long iflags; + return idr_find(&sg_index_idr, dev); +} - read_lock_irqsave(&sg_index_lock, iflags); - sdp = idr_find(&sg_index_idr, dev); - read_unlock_irqrestore(&sg_index_lock, iflags); +static Sg_device *sg_get_dev(int dev) +{ + struct sg_device *sdp; + unsigned long flags; + + read_lock_irqsave(&sg_index_lock, flags); + sdp = sg_lookup_dev(dev); + if (!sdp) + sdp = ERR_PTR(-ENXIO); + else if (sdp->detached) { + /* If sdp->detached, then the refcount may already be 0, in + * which case it would be a bug to do kref_get(). + */ + sdp = ERR_PTR(-ENODEV); + } else + kref_get(&sdp->d_ref); + read_unlock_irqrestore(&sg_index_lock, flags); return sdp; } +static void sg_put_dev(struct sg_device *sdp) +{ + kref_put(&sdp->d_ref, sg_device_destroy); +} + #ifdef CONFIG_SCSI_PROC_FS static struct proc_dir_entry *sg_proc_sgp = NULL; @@ -2468,8 +2446,10 @@ static int sg_proc_seq_show_dev(struct seq_file *s, void *v) struct sg_proc_deviter * it = (struct sg_proc_deviter *) v; Sg_device *sdp; struct scsi_device *scsidp; + unsigned long iflags; - sdp = it ? sg_get_dev(it->index) : NULL; + read_lock_irqsave(&sg_index_lock, iflags); + sdp = it ? sg_lookup_dev(it->index) : NULL; if (sdp && (scsidp = sdp->device) && (!sdp->detached)) seq_printf(s, "%d\t%d\t%d\t%d\t%d\t%d\t%d\t%d\t%d\n", scsidp->host->host_no, scsidp->channel, @@ -2480,6 +2460,7 @@ static int sg_proc_seq_show_dev(struct seq_file *s, void *v) (int) scsi_device_online(scsidp)); else seq_printf(s, "-1\t-1\t-1\t-1\t-1\t-1\t-1\t-1\t-1\n"); + read_unlock_irqrestore(&sg_index_lock, iflags); return 0; } @@ -2493,16 +2474,20 @@ static int sg_proc_seq_show_devstrs(struct seq_file *s, void *v) struct sg_proc_deviter * it = (struct sg_proc_deviter *) v; Sg_device *sdp; struct scsi_device *scsidp; + unsigned long iflags; - sdp = it ? sg_get_dev(it->index) : NULL; + read_lock_irqsave(&sg_index_lock, iflags); + sdp = it ? sg_lookup_dev(it->index) : NULL; if (sdp && (scsidp = sdp->device) && (!sdp->detached)) seq_printf(s, "%8.8s\t%16.16s\t%4.4s\n", scsidp->vendor, scsidp->model, scsidp->rev); else seq_printf(s, "\n"); + read_unlock_irqrestore(&sg_index_lock, iflags); return 0; } +/* must be called while holding sg_index_lock */ static void sg_proc_debug_helper(struct seq_file *s, Sg_device * sdp) { int k, m, new_interface, blen, usg; @@ -2512,7 +2497,8 @@ static void sg_proc_debug_helper(struct seq_file *s, Sg_device * sdp) const char * cp; unsigned int ms; - for (k = 0; (fp = sg_get_nth_sfp(sdp, k)); ++k) { + for (k = 0, fp = sdp->headfp; fp != NULL; ++k, fp = fp->nextfp) { + read_lock(&fp->rq_list_lock); /* irqs already disabled */ seq_printf(s, " FD(%d): timeout=%dms bufflen=%d " "(res)sgat=%d low_dma=%d\n", k + 1, jiffies_to_msecs(fp->timeout), @@ -2522,7 +2508,9 @@ static void sg_proc_debug_helper(struct seq_file *s, Sg_device * sdp) seq_printf(s, " cmd_q=%d f_packid=%d k_orphan=%d closed=%d\n", (int) fp->cmd_q, (int) fp->force_packid, (int) fp->keep_orphan, (int) fp->closed); - for (m = 0; (srp = sg_get_nth_request(fp, m)); ++m) { + for (m = 0, srp = fp->headrp; + srp != NULL; + ++m, srp = srp->nextrp) { hp = &srp->header; new_interface = (hp->interface_id == '\0') ? 0 : 1; if (srp->res_used) { @@ -2559,6 +2547,7 @@ static void sg_proc_debug_helper(struct seq_file *s, Sg_device * sdp) } if (0 == m) seq_printf(s, " No requests active\n"); + read_unlock(&fp->rq_list_lock); } } @@ -2571,39 +2560,34 @@ static int sg_proc_seq_show_debug(struct seq_file *s, void *v) { struct sg_proc_deviter * it = (struct sg_proc_deviter *) v; Sg_device *sdp; + unsigned long iflags; if (it && (0 == it->index)) { seq_printf(s, "max_active_device=%d(origin 1)\n", (int)it->max); seq_printf(s, " def_reserved_size=%d\n", sg_big_buff); } - sdp = it ? sg_get_dev(it->index) : NULL; - if (sdp) { - struct scsi_device *scsidp = sdp->device; - if (NULL == scsidp) { - seq_printf(s, "device %d detached ??\n", - (int)it->index); - return 0; - } + read_lock_irqsave(&sg_index_lock, iflags); + sdp = it ? sg_lookup_dev(it->index) : NULL; + if (sdp && sdp->headfp) { + struct scsi_device *scsidp = sdp->device; - if (sg_get_nth_sfp(sdp, 0)) { - seq_printf(s, " >>> device=%s ", - sdp->disk->disk_name); - if (sdp->detached) - seq_printf(s, "detached pending close "); - else - seq_printf - (s, "scsi%d chan=%d id=%d lun=%d em=%d", - scsidp->host->host_no, - scsidp->channel, scsidp->id, - scsidp->lun, - scsidp->host->hostt->emulated); - seq_printf(s, " sg_tablesize=%d excl=%d\n", - sdp->sg_tablesize, sdp->exclude); - } + seq_printf(s, " >>> device=%s ", sdp->disk->disk_name); + if (sdp->detached) + seq_printf(s, "detached pending close "); + else + seq_printf + (s, "scsi%d chan=%d id=%d lun=%d em=%d", + scsidp->host->host_no, + scsidp->channel, scsidp->id, + scsidp->lun, + scsidp->host->hostt->emulated); + seq_printf(s, " sg_tablesize=%d excl=%d\n", + sdp->sg_tablesize, sdp->exclude); sg_proc_debug_helper(s, sdp); } + read_unlock_irqrestore(&sg_index_lock, iflags); return 0; } -- cgit v0.10.2 From a2dd3b4cea335713b58996bb07b3abcde1175f47 Mon Sep 17 00:00:00 2001 From: Tony Battersby Date: Tue, 20 Jan 2009 17:00:09 -0500 Subject: [SCSI] sg: fix races with ioctl(SG_IO) sg_io_owned needs to be set before the command is sent to the midlevel; otherwise, a quickly-completing command may cause a different CPU to see "srp->done == 1 && !srp->sg_io_owned", which would lead to incorrect behavior. Check srp->done and set srp->orphan while holding rq_list_lock to prevent races with sg_rq_end_io(). There is no need to check sfp->closed from read/write/ioctl/poll/etc. since the kernel guarantees that this won't happen. The usefulness of sg_srp_done() was questionable before; now it is definitely not needed. Signed-off-by: Tony Battersby Acked-by: Douglas Gilbert Signed-off-by: James Bottomley diff --git a/drivers/scsi/sg.c b/drivers/scsi/sg.c index b447527..18d079e 100644 --- a/drivers/scsi/sg.c +++ b/drivers/scsi/sg.c @@ -189,7 +189,7 @@ static ssize_t sg_new_read(Sg_fd * sfp, char __user *buf, size_t count, Sg_request * srp); static ssize_t sg_new_write(Sg_fd *sfp, struct file *file, const char __user *buf, size_t count, int blocking, - int read_only, Sg_request **o_srp); + int read_only, int sg_io_owned, Sg_request **o_srp); static int sg_common_write(Sg_fd * sfp, Sg_request * srp, unsigned char *cmnd, int timeout, int blocking); static int sg_read_oxfer(Sg_request * srp, char __user *outp, int num_read_xfer); @@ -561,7 +561,8 @@ sg_write(struct file *filp, const char __user *buf, size_t count, loff_t * ppos) return -EFAULT; blocking = !(filp->f_flags & O_NONBLOCK); if (old_hdr.reply_len < 0) - return sg_new_write(sfp, filp, buf, count, blocking, 0, NULL); + return sg_new_write(sfp, filp, buf, count, + blocking, 0, 0, NULL); if (count < (SZ_SG_HEADER + 6)) return -EIO; /* The minimum scsi command length is 6 bytes. */ @@ -642,7 +643,7 @@ sg_write(struct file *filp, const char __user *buf, size_t count, loff_t * ppos) static ssize_t sg_new_write(Sg_fd *sfp, struct file *file, const char __user *buf, - size_t count, int blocking, int read_only, + size_t count, int blocking, int read_only, int sg_io_owned, Sg_request **o_srp) { int k; @@ -662,6 +663,7 @@ sg_new_write(Sg_fd *sfp, struct file *file, const char __user *buf, SCSI_LOG_TIMEOUT(1, printk("sg_new_write: queue full\n")); return -EDOM; } + srp->sg_io_owned = sg_io_owned; hp = &srp->header; if (__copy_from_user(hp, buf, SZ_SG_IO_HDR)) { sg_remove_request(sfp, srp); @@ -766,18 +768,6 @@ sg_common_write(Sg_fd * sfp, Sg_request * srp, } static int -sg_srp_done(Sg_request *srp, Sg_fd *sfp) -{ - unsigned long iflags; - int done; - - read_lock_irqsave(&sfp->rq_list_lock, iflags); - done = srp->done; - read_unlock_irqrestore(&sfp->rq_list_lock, iflags); - return done; -} - -static int sg_ioctl(struct inode *inode, struct file *filp, unsigned int cmd_in, unsigned long arg) { @@ -809,27 +799,26 @@ sg_ioctl(struct inode *inode, struct file *filp, return -EFAULT; result = sg_new_write(sfp, filp, p, SZ_SG_IO_HDR, - blocking, read_only, &srp); + blocking, read_only, 1, &srp); if (result < 0) return result; - srp->sg_io_owned = 1; while (1) { result = 0; /* following macro to beat race condition */ __wait_event_interruptible(sfp->read_wait, - (sdp->detached || sfp->closed || sg_srp_done(srp, sfp)), - result); + (srp->done || sdp->detached), + result); if (sdp->detached) return -ENODEV; - if (sfp->closed) - return 0; /* request packet dropped already */ - if (0 == result) + write_lock_irq(&sfp->rq_list_lock); + if (srp->done) { + srp->done = 2; + write_unlock_irq(&sfp->rq_list_lock); break; + } srp->orphan = 1; + write_unlock_irq(&sfp->rq_list_lock); return result; /* -ERESTARTSYS because signal hit process */ } - write_lock_irqsave(&sfp->rq_list_lock, iflags); - srp->done = 2; - write_unlock_irqrestore(&sfp->rq_list_lock, iflags); result = sg_new_read(sfp, p, SZ_SG_IO_HDR, srp); return (result < 0) ? result : 0; } -- cgit v0.10.2 From 71969fd9e2c523d22bf1742eb31f1562247710eb Mon Sep 17 00:00:00 2001 From: Boaz Harrosh Date: Sun, 25 Jan 2009 16:50:02 +0200 Subject: [SCSI] major.h: char-major number for OSD device driver Allocate major 260 for osd. Signed-off-by: Boaz Harrosh CC: Torben Mathiasen Signed-off-by: James Bottomley diff --git a/Documentation/devices.txt b/Documentation/devices.txt index 2be0824..62254d4 100644 --- a/Documentation/devices.txt +++ b/Documentation/devices.txt @@ -3145,6 +3145,12 @@ Your cooperation is appreciated. 1 = /dev/blockrom1 Second ROM card's translation layer interface ... +260 char OSD (Object-based-device) SCSI Device + 0 = /dev/osd0 First OSD Device + 1 = /dev/osd1 Second OSD Device + ... + 255 = /dev/osd255 256th OSD Device + **** ADDITIONAL /dev DIRECTORY ENTRIES This section details additional entries that should or may exist in diff --git a/include/linux/major.h b/include/linux/major.h index 8824945..058ec15 100644 --- a/include/linux/major.h +++ b/include/linux/major.h @@ -171,5 +171,6 @@ #define VIOTAPE_MAJOR 230 #define BLOCK_EXT_MAJOR 259 +#define SCSI_OSD_MAJOR 260 /* open-osd's OSD scsi device */ #endif -- cgit v0.10.2 From 82443a58d361123d418033e9e32ac29a842fce68 Mon Sep 17 00:00:00 2001 From: Boaz Harrosh Date: Sun, 25 Jan 2009 16:51:33 +0200 Subject: [SCSI] add OSD_TYPE - Define the OSD_TYPE scsi device and let it show up in scans Signed-off-by: Boaz Harrosh Signed-off-by: James Bottomley diff --git a/drivers/scsi/scsi_scan.c b/drivers/scsi/scsi_scan.c index 8f4de20..a14d245 100644 --- a/drivers/scsi/scsi_scan.c +++ b/drivers/scsi/scsi_scan.c @@ -797,6 +797,7 @@ static int scsi_add_lun(struct scsi_device *sdev, unsigned char *inq_result, case TYPE_ENCLOSURE: case TYPE_COMM: case TYPE_RAID: + case TYPE_OSD: sdev->writeable = 1; break; case TYPE_ROM: diff --git a/include/scsi/scsi.h b/include/scsi/scsi.h index 815d404..80d7f60 100644 --- a/include/scsi/scsi.h +++ b/include/scsi/scsi.h @@ -263,6 +263,7 @@ static inline int scsi_status_is_good(int status) #define TYPE_RAID 0x0c #define TYPE_ENCLOSURE 0x0d /* Enclosure Services Device */ #define TYPE_RBC 0x0e +#define TYPE_OSD 0x11 #define TYPE_NO_LUN 0x7f /* SCSI protocols; these are taken from SPC-3 section 7.5 */ -- cgit v0.10.2 From de258bf5e63863f42e0f9a7c5ffd29916a41e399 Mon Sep 17 00:00:00 2001 From: Boaz Harrosh Date: Sun, 25 Jan 2009 16:54:10 +0200 Subject: [SCSI] libosd: OSDv1 Headers Headers only patch. osd_protocol.h Contains a C-fied definition of the T10 OSD standard osd_types.h Contains CPU order common used types osd_initiator.h API definition of the osd_initiator library osd_sec.h Contains High level API for the security manager. [Note that checkpatch spews errors on things that are valid in this context and will not be fixed] Signed-off-by: Boaz Harrosh Reviewed-by: Benny Halevy Signed-off-by: James Bottomley diff --git a/include/scsi/osd_initiator.h b/include/scsi/osd_initiator.h new file mode 100644 index 0000000..1d92247 --- /dev/null +++ b/include/scsi/osd_initiator.h @@ -0,0 +1,332 @@ +/* + * osd_initiator.h - OSD initiator API definition + * + * Copyright (C) 2008 Panasas Inc. All rights reserved. + * + * Authors: + * Boaz Harrosh + * Benny Halevy + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 + * + */ +#ifndef __OSD_INITIATOR_H__ +#define __OSD_INITIATOR_H__ + +#include "osd_protocol.h" +#include "osd_types.h" + +#include + +/* Note: "NI" in comments below means "Not Implemented yet" */ + +/* + * Object-based Storage Device. + * This object represents an OSD device. + * It is not a full linux device in any way. It is only + * a place to hang resources associated with a Linux + * request Q and some default properties. + */ +struct osd_dev { + struct scsi_device *scsi_device; + unsigned def_timeout; +}; + +void osd_dev_init(struct osd_dev *od, struct scsi_device *scsi_device); +void osd_dev_fini(struct osd_dev *od); + +struct osd_request; +typedef void (osd_req_done_fn)(struct osd_request *or, void *private); + +struct osd_request { + struct osd_cdb cdb; + struct osd_data_out_integrity_info out_data_integ; + struct osd_data_in_integrity_info in_data_integ; + + struct osd_dev *osd_dev; + struct request *request; + + struct _osd_req_data_segment { + void *buff; + unsigned alloc_size; /* 0 here means: don't call kfree */ + unsigned total_bytes; + } set_attr, enc_get_attr, get_attr; + + struct _osd_io_info { + struct bio *bio; + u64 total_bytes; + struct request *req; + struct _osd_req_data_segment *last_seg; + u8 *pad_buff; + } out, in; + + gfp_t alloc_flags; + unsigned timeout; + unsigned retries; + u8 sense[OSD_MAX_SENSE_LEN]; + enum osd_attributes_mode attributes_mode; + + osd_req_done_fn *async_done; + void *async_private; + int async_error; +}; + +/* + * How to use the osd library: + * + * osd_start_request + * Allocates a request. + * + * osd_req_* + * Call one of, to encode the desired operation. + * + * osd_add_{get,set}_attr + * Optionally add attributes to the CDB, list or page mode. + * + * osd_finalize_request + * Computes final data out/in offsets and signs the request, + * making it ready for execution. + * + * osd_execute_request + * May be called to execute it through the block layer. Other wise submit + * the associated block request in some other way. + * + * After execution: + * osd_req_decode_sense + * Decodes sense information to verify execution results. + * + * osd_req_decode_get_attr + * Retrieve osd_add_get_attr_list() values if used. + * + * osd_end_request + * Must be called to deallocate the request. + */ + +/** + * osd_start_request - Allocate and initialize an osd_request + * + * @osd_dev: OSD device that holds the scsi-device and default values + * that the request is associated with. + * @gfp: The allocation flags to use for request allocation, and all + * subsequent allocations. This will be stored at + * osd_request->alloc_flags, can be changed by user later + * + * Allocate osd_request and initialize all members to the + * default/initial state. + */ +struct osd_request *osd_start_request(struct osd_dev *od, gfp_t gfp); + +enum osd_req_options { + OSD_REQ_FUA = 0x08, /* Force Unit Access */ + OSD_REQ_DPO = 0x10, /* Disable Page Out */ + + OSD_REQ_BYPASS_TIMESTAMPS = 0x80, +}; + +/** + * osd_finalize_request - Sign request and prepare request for execution + * + * @or: osd_request to prepare + * @options: combination of osd_req_options bit flags or 0. + * @cap: A Pointer to an OSD_CAP_LEN bytes buffer that is received from + * The security manager as capabilities for this cdb. + * @cap_key: The cryptographic key used to sign the cdb/data. Can be null + * if NOSEC is used. + * + * The actual request and bios are only allocated here, so are the get_attr + * buffers that will receive the returned attributes. Copy's @cap to cdb. + * Sign the cdb/data with @cap_key. + */ +int osd_finalize_request(struct osd_request *or, + u8 options, const void *cap, const u8 *cap_key); + +/** + * osd_execute_request - Execute the request synchronously through block-layer + * + * @or: osd_request to Executed + * + * Calls blk_execute_rq to q the command and waits for completion. + */ +int osd_execute_request(struct osd_request *or); + +/** + * osd_execute_request_async - Execute the request without waitting. + * + * @or: - osd_request to Executed + * @done: (Optional) - Called at end of execution + * @private: - Will be passed to @done function + * + * Calls blk_execute_rq_nowait to queue the command. When execution is done + * optionally calls @done with @private as parameter. @or->async_error will + * have the return code + */ +int osd_execute_request_async(struct osd_request *or, + osd_req_done_fn *done, void *private); + +/** + * osd_end_request - return osd_request to free store + * + * @or: osd_request to free + * + * Deallocate all osd_request resources (struct req's, BIOs, buffers, etc.) + */ +void osd_end_request(struct osd_request *or); + +/* + * CDB Encoding + * + * Note: call only one of the following methods. + */ + +/* + * Device commands + */ +void osd_req_set_master_seed_xchg(struct osd_request *or, ...);/* NI */ +void osd_req_set_master_key(struct osd_request *or, ...);/* NI */ + +void osd_req_format(struct osd_request *or, u64 tot_capacity); + +/* list all partitions + * @list header must be initialized to zero on first run. + * + * Call osd_is_obj_list_done() to find if we got the complete list. + */ +int osd_req_list_dev_partitions(struct osd_request *or, + osd_id initial_id, struct osd_obj_id_list *list, unsigned nelem); + +void osd_req_flush_obsd(struct osd_request *or, + enum osd_options_flush_scope_values); + +void osd_req_perform_scsi_command(struct osd_request *or, + const u8 *cdb, ...);/* NI */ +void osd_req_task_management(struct osd_request *or, ...);/* NI */ + +/* + * Partition commands + */ +void osd_req_create_partition(struct osd_request *or, osd_id partition); +void osd_req_remove_partition(struct osd_request *or, osd_id partition); + +void osd_req_set_partition_key(struct osd_request *or, + osd_id partition, u8 new_key_id[OSD_CRYPTO_KEYID_SIZE], + u8 seed[OSD_CRYPTO_SEED_SIZE]);/* NI */ + +/* list all collections in the partition + * @list header must be init to zero on first run. + * + * Call osd_is_obj_list_done() to find if we got the complete list. + */ +int osd_req_list_partition_collections(struct osd_request *or, + osd_id partition, osd_id initial_id, struct osd_obj_id_list *list, + unsigned nelem); + +/* list all objects in the partition + * @list header must be init to zero on first run. + * + * Call osd_is_obj_list_done() to find if we got the complete list. + */ +int osd_req_list_partition_objects(struct osd_request *or, + osd_id partition, osd_id initial_id, struct osd_obj_id_list *list, + unsigned nelem); + +void osd_req_flush_partition(struct osd_request *or, + osd_id partition, enum osd_options_flush_scope_values); + +/* + * Collection commands + */ +void osd_req_create_collection(struct osd_request *or, + const struct osd_obj_id *);/* NI */ +void osd_req_remove_collection(struct osd_request *or, + const struct osd_obj_id *);/* NI */ + +/* list all objects in the collection */ +int osd_req_list_collection_objects(struct osd_request *or, + const struct osd_obj_id *, osd_id initial_id, + struct osd_obj_id_list *list, unsigned nelem); + +/* V2 only filtered list of objects in the collection */ +void osd_req_query(struct osd_request *or, ...);/* NI */ + +void osd_req_flush_collection(struct osd_request *or, + const struct osd_obj_id *, enum osd_options_flush_scope_values); + +void osd_req_get_member_attrs(struct osd_request *or, ...);/* V2-only NI */ +void osd_req_set_member_attrs(struct osd_request *or, ...);/* V2-only NI */ + +/* + * Object commands + */ +void osd_req_create_object(struct osd_request *or, struct osd_obj_id *); +void osd_req_remove_object(struct osd_request *or, struct osd_obj_id *); + +void osd_req_write(struct osd_request *or, + const struct osd_obj_id *, struct bio *data_out, u64 offset); +void osd_req_append(struct osd_request *or, + const struct osd_obj_id *, struct bio *data_out);/* NI */ +void osd_req_create_write(struct osd_request *or, + const struct osd_obj_id *, struct bio *data_out, u64 offset);/* NI */ +void osd_req_clear(struct osd_request *or, + const struct osd_obj_id *, u64 offset, u64 len);/* NI */ +void osd_req_punch(struct osd_request *or, + const struct osd_obj_id *, u64 offset, u64 len);/* V2-only NI */ + +void osd_req_flush_object(struct osd_request *or, + const struct osd_obj_id *, enum osd_options_flush_scope_values, + /*V2*/ u64 offset, /*V2*/ u64 len); + +void osd_req_read(struct osd_request *or, + const struct osd_obj_id *, struct bio *data_in, u64 offset); + +/* + * Root/Partition/Collection/Object Attributes commands + */ + +/* get before set */ +void osd_req_get_attributes(struct osd_request *or, const struct osd_obj_id *); + +/* set before get */ +void osd_req_set_attributes(struct osd_request *or, const struct osd_obj_id *); + +/* + * Attributes appended to most commands + */ + +/* Attributes List mode (or V2 CDB) */ + /* + * TODO: In ver2 if at finalize time only one attr was set and no gets, + * then the Attributes CDB mode is used automatically to save IO. + */ + +/* set a list of attributes. */ +int osd_req_add_set_attr_list(struct osd_request *or, + const struct osd_attr *, unsigned nelem); + +/* get a list of attributes */ +int osd_req_add_get_attr_list(struct osd_request *or, + const struct osd_attr *, unsigned nelem); + +/* + * Attributes list decoding + * Must be called after osd_request.request was executed + * It is called in a loop to decode the returned get_attr + * (see osd_add_get_attr) + */ +int osd_req_decode_get_attr_list(struct osd_request *or, + struct osd_attr *, int *nelem, void **iterator); + +/* Attributes Page mode */ + +/* + * Read an attribute page and optionally set one attribute + * + * Retrieves the attribute page directly to a user buffer. + * @attr_page_data shall stay valid until end of execution. + * See osd_attributes.h for common page structures + */ +int osd_req_add_get_attr_page(struct osd_request *or, + u32 page_id, void *attr_page_data, unsigned max_page_len, + const struct osd_attr *set_one); + +#endif /* __OSD_LIB_H__ */ diff --git a/include/scsi/osd_protocol.h b/include/scsi/osd_protocol.h new file mode 100644 index 0000000..ce1a877 --- /dev/null +++ b/include/scsi/osd_protocol.h @@ -0,0 +1,497 @@ +/* + * osd_protocol.h - OSD T10 standard C definitions. + * + * Copyright (C) 2008 Panasas Inc. All rights reserved. + * + * Authors: + * Boaz Harrosh + * Benny Halevy + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 + * + * This file contains types and constants that are defined by the protocol + * Note: All names and symbols are taken from the OSD standard's text. + */ +#ifndef __OSD_PROTOCOL_H__ +#define __OSD_PROTOCOL_H__ + +#include +#include +#include + +enum { + OSDv1_ADDITIONAL_CDB_LENGTH = 192, + OSDv1_TOTAL_CDB_LEN = OSDv1_ADDITIONAL_CDB_LENGTH + 8, + OSDv1_CAP_LEN = 80, + /* Latest supported version */ + OSD_ADDITIONAL_CDB_LENGTH = OSDv1_ADDITIONAL_CDB_LENGTH, + OSD_TOTAL_CDB_LEN = OSDv1_TOTAL_CDB_LEN, + OSD_CAP_LEN = OSDv1_CAP_LEN, + + OSD_SYSTEMID_LEN = 20, + OSD_CRYPTO_KEYID_SIZE = 20, + OSD_CRYPTO_SEED_SIZE = 4, + OSD_CRYPTO_NONCE_SIZE = 12, + OSD_MAX_SENSE_LEN = 252, /* from SPC-3 */ + + OSD_PARTITION_FIRST_ID = 0x10000, + OSD_OBJECT_FIRST_ID = 0x10000, +}; + +/* (osd-r10 5.2.4) + * osd2r03: 5.2.3 Caching control bits + */ +enum osd_options_byte { + OSD_CDB_FUA = 0x08, /* Force Unit Access */ + OSD_CDB_DPO = 0x10, /* Disable Page Out */ +}; + +/* + * osd2r03: 5.2.5 Isolation. + * First 3 bits, V2-only. + * Also for attr 110h "default isolation method" at Root Information page + */ +enum osd_options_byte_isolation { + OSD_ISOLATION_DEFAULT = 0, + OSD_ISOLATION_NONE = 1, + OSD_ISOLATION_STRICT = 2, + OSD_ISOLATION_RANGE = 4, + OSD_ISOLATION_FUNCTIONAL = 5, + OSD_ISOLATION_VENDOR = 7, +}; + +/* (osd-r10: 6.7) + * osd2r03: 6.8 FLUSH, FLUSH COLLECTION, FLUSH OSD, FLUSH PARTITION + */ +enum osd_options_flush_scope_values { + OSD_CDB_FLUSH_ALL = 0, + OSD_CDB_FLUSH_ATTR_ONLY = 1, + + OSD_CDB_FLUSH_ALL_RECURSIVE = 2, + /* V2-only */ + OSD_CDB_FLUSH_ALL_RANGE = 2, +}; + +/* osd2r03: 5.2.10 Timestamps control */ +enum { + OSD_CDB_NORMAL_TIMESTAMPS = 0, + OSD_CDB_BYPASS_TIMESTAMPS = 0x7f, +}; + +/* (osd-r10: 5.2.2.1) + * osd2r03: 5.2.4.1 Get and set attributes CDB format selection + * 2 bits at second nibble of command_specific_options byte + */ +enum osd_attributes_mode { + /* V2-only */ + OSD_CDB_SET_ONE_ATTR = 0x10, + + OSD_CDB_GET_ATTR_PAGE_SET_ONE = 0x20, + OSD_CDB_GET_SET_ATTR_LISTS = 0x30, + + OSD_CDB_GET_SET_ATTR_MASK = 0x30, +}; + +/* (osd-r10: 4.12.5) + * osd2r03: 4.14.5 Data-In and Data-Out buffer offsets + * byte offset = mantissa * (2^(exponent+8)) + * struct { + * unsigned mantissa: 28; + * int exponent: 04; + * } + */ +typedef __be32 __bitwise osd_cdb_offset; + +enum { + OSD_OFFSET_UNUSED = 0xFFFFFFFF, + OSD_OFFSET_MAX_BITS = 28, + + OSDv1_OFFSET_MIN_SHIFT = 8, + OSD_OFFSET_MAX_SHIFT = 16, +}; + +/* Return the smallest allowed encoded offset that contains @offset. + * + * The actual encoded offset returned is @offset + *padding. + * (up to max_shift, non-inclusive) + */ +osd_cdb_offset __osd_encode_offset(u64 offset, unsigned *padding, + int min_shift, int max_shift); + +/* Minimum alignment is 256 bytes + * Note: Seems from std v1 that exponent can be from 0+8 to 0xE+8 (inclusive) + * which is 8 to 23 but IBM code restricts it to 16, so be it. + */ +static inline osd_cdb_offset osd_encode_offset_v1(u64 offset, unsigned *padding) +{ + return __osd_encode_offset(offset, padding, + OSDv1_OFFSET_MIN_SHIFT, OSD_OFFSET_MAX_SHIFT); +} + +/* osd2r03: 5.2.1 Overview */ +struct osd_cdb_head { + struct scsi_varlen_cdb_hdr varlen_cdb; +/*10*/ u8 options; + u8 command_specific_options; + u8 timestamp_control; +/*13*/ u8 reserved1[3]; +/*16*/ __be64 partition; +/*24*/ __be64 object; +/*32*/ union { /* V1 vs V2 alignment differences */ + struct __osdv1_cdb_addr_len { +/*32*/ __be32 list_identifier;/* Rarely used */ +/*36*/ __be64 length; +/*44*/ __be64 start_address; + } __packed v1; + }; +/*52*/ union { /* selected attributes mode Page/List/Single */ + struct osd_attributes_page_mode { +/*52*/ __be32 get_attr_page; +/*56*/ __be32 get_attr_alloc_length; +/*60*/ osd_cdb_offset get_attr_offset; + +/*64*/ __be32 set_attr_page; +/*68*/ __be32 set_attr_id; +/*72*/ __be32 set_attr_length; +/*76*/ osd_cdb_offset set_attr_offset; +/*80*/ } __packed attrs_page; + + struct osd_attributes_list_mode { +/*52*/ __be32 get_attr_desc_bytes; +/*56*/ osd_cdb_offset get_attr_desc_offset; + +/*60*/ __be32 get_attr_alloc_length; +/*64*/ osd_cdb_offset get_attr_offset; + +/*68*/ __be32 set_attr_bytes; +/*72*/ osd_cdb_offset set_attr_offset; + __be32 not_used; +/*80*/ } __packed attrs_list; + + /* osd2r03:5.2.4.2 Set one attribute value using CDB fields */ + struct osd_attributes_cdb_mode { +/*52*/ __be32 set_attr_page; +/*56*/ __be32 set_attr_id; +/*60*/ __be16 set_attr_len; +/*62*/ u8 set_attr_val[18]; +/*80*/ } __packed attrs_cdb; +/*52*/ u8 get_set_attributes_parameters[28]; + }; +} __packed; +/*80*/ + +/*160 v1*/ +struct osd_security_parameters { +/*160*/u8 integrity_check_value[OSD_CRYPTO_KEYID_SIZE]; +/*180*/u8 request_nonce[OSD_CRYPTO_NONCE_SIZE]; +/*192*/osd_cdb_offset data_in_integrity_check_offset; +/*196*/osd_cdb_offset data_out_integrity_check_offset; +} __packed; +/*200 v1*/ + +struct osdv1_cdb { + struct osd_cdb_head h; + u8 caps[OSDv1_CAP_LEN]; + struct osd_security_parameters sec_params; +} __packed; + +struct osd_cdb { + union { + struct osdv1_cdb v1; + u8 buff[OSD_TOTAL_CDB_LEN]; + }; +} __packed; + +static inline struct osd_cdb_head *osd_cdb_head(struct osd_cdb *ocdb) +{ + return (struct osd_cdb_head *)ocdb->buff; +} + +/* define both version actions + * Ex name = FORMAT_OSD we have OSD_ACT_FORMAT_OSD && OSDv1_ACT_FORMAT_OSD + */ +#define OSD_ACT___(Name, Num) \ + OSD_ACT_##Name = __constant_cpu_to_be16(0x8880 + Num), \ + OSDv1_ACT_##Name = __constant_cpu_to_be16(0x8800 + Num), + +/* V2 only actions */ +#define OSD_ACT_V2(Name, Num) \ + OSD_ACT_##Name = __constant_cpu_to_be16(0x8880 + Num), + +#define OSD_ACT_V1_V2(Name, Num1, Num2) \ + OSD_ACT_##Name = __constant_cpu_to_be16(Num2), \ + OSDv1_ACT_##Name = __constant_cpu_to_be16(Num1), + +enum osd_service_actions { + OSD_ACT_V2(OBJECT_STRUCTURE_CHECK, 0x00) + OSD_ACT___(FORMAT_OSD, 0x01) + OSD_ACT___(CREATE, 0x02) + OSD_ACT___(LIST, 0x03) + OSD_ACT_V2(PUNCH, 0x04) + OSD_ACT___(READ, 0x05) + OSD_ACT___(WRITE, 0x06) + OSD_ACT___(APPEND, 0x07) + OSD_ACT___(FLUSH, 0x08) + OSD_ACT_V2(CLEAR, 0x09) + OSD_ACT___(REMOVE, 0x0A) + OSD_ACT___(CREATE_PARTITION, 0x0B) + OSD_ACT___(REMOVE_PARTITION, 0x0C) + OSD_ACT___(GET_ATTRIBUTES, 0x0E) + OSD_ACT___(SET_ATTRIBUTES, 0x0F) + OSD_ACT___(CREATE_AND_WRITE, 0x12) + OSD_ACT___(CREATE_COLLECTION, 0x15) + OSD_ACT___(REMOVE_COLLECTION, 0x16) + OSD_ACT___(LIST_COLLECTION, 0x17) + OSD_ACT___(SET_KEY, 0x18) + OSD_ACT___(SET_MASTER_KEY, 0x19) + OSD_ACT___(FLUSH_COLLECTION, 0x1A) + OSD_ACT___(FLUSH_PARTITION, 0x1B) + OSD_ACT___(FLUSH_OSD, 0x1C) + + OSD_ACT_V2(QUERY, 0x20) + OSD_ACT_V2(REMOVE_MEMBER_OBJECTS, 0x21) + OSD_ACT_V2(GET_MEMBER_ATTRIBUTES, 0x22) + OSD_ACT_V2(SET_MEMBER_ATTRIBUTES, 0x23) + OSD_ACT_V2(READ_MAP, 0x31) + + OSD_ACT_V1_V2(PERFORM_SCSI_COMMAND, 0x8F7E, 0x8F7C) + OSD_ACT_V1_V2(SCSI_TASK_MANAGEMENT, 0x8F7F, 0x8F7D) + /* 0x8F80 to 0x8FFF are Vendor specific */ +}; + +/* osd2r03: 7.1.3.2 List entry format for retrieving attributes */ +struct osd_attributes_list_attrid { + __be32 attr_page; + __be32 attr_id; +} __packed; + +/* + * osd2r03: 7.1.3.3 List entry format for retrieved attributes and + * for setting attributes + */ +struct osd_attributes_list_element { + __be32 attr_page; + __be32 attr_id; + __be16 attr_bytes; + u8 attr_val[0]; +} __packed; + +enum { + OSDv1_ATTRIBUTES_ELEM_ALIGN = 1, +}; + +enum { + OSD_ATTR_LIST_ALL_PAGES = 0xFFFFFFFF, + OSD_ATTR_LIST_ALL_IN_PAGE = 0xFFFFFFFF, +}; + +static inline unsigned osdv1_attr_list_elem_size(unsigned len) +{ + return ALIGN(len + sizeof(struct osd_attributes_list_element), + OSDv1_ATTRIBUTES_ELEM_ALIGN); +} + +/* + * osd2r03: 7.1.3 OSD attributes lists (Table 184) — List type values + */ +enum osd_attr_list_types { + OSD_ATTR_LIST_GET = 0x1, /* descriptors only */ + OSD_ATTR_LIST_SET_RETRIEVE = 0x9, /*descriptors/values variable-length*/ + OSD_V2_ATTR_LIST_MULTIPLE = 0xE, /* ver2, Multiple Objects lists*/ + OSD_V1_ATTR_LIST_CREATE_MULTIPLE = 0xF,/*ver1, used by create_multple*/ +}; + +/* osd2r03: 7.1.3.4 Multi-object retrieved attributes format */ +struct osd_attributes_list_multi_header { + __be64 object_id; + u8 object_type; /* object_type enum below */ + u8 reserved[5]; + __be16 list_bytes; + /* followed by struct osd_attributes_list_element's */ +}; + +struct osdv1_attributes_list_header { + u8 type; /* low 4-bit only */ + u8 pad; + __be16 list_bytes; /* Initiator shall set to Zero. Only set by target */ + /* + * type=9 followed by struct osd_attributes_list_element's + * type=E followed by struct osd_attributes_list_multi_header's + */ +} __packed; + +static inline unsigned osdv1_list_size(struct osdv1_attributes_list_header *h) +{ + return be16_to_cpu(h->list_bytes); +} + +/* (osd-r10 6.13) + * osd2r03: 6.15 LIST (Table 79) LIST command parameter data. + * for root_lstchg below + */ +enum { + OSD_OBJ_ID_LIST_PAR = 0x1, /* V1-only. Not used in V2 */ + OSD_OBJ_ID_LIST_LSTCHG = 0x2, +}; + +/* + * osd2r03: 6.15.2 LIST command parameter data + * (Also for LIST COLLECTION) + */ +struct osd_obj_id_list { + __be64 list_bytes; /* bytes in list excluding list_bytes (-8) */ + __be64 continuation_id; + __be32 list_identifier; + u8 pad[3]; + u8 root_lstchg; + __be64 object_ids[0]; +} __packed; + +static inline bool osd_is_obj_list_done(struct osd_obj_id_list *list, + bool *is_changed) +{ + *is_changed = (0 != (list->root_lstchg & OSD_OBJ_ID_LIST_LSTCHG)); + return 0 != list->continuation_id; +} + +/* + * osd2r03: 4.12.4.5 The ALLDATA security method + */ +struct osd_data_out_integrity_info { + __be64 data_bytes; + __be64 set_attributes_bytes; + __be64 get_attributes_bytes; + __be64 integrity_check_value; +} __packed; + +struct osd_data_in_integrity_info { + __be64 data_bytes; + __be64 retrieved_attributes_bytes; + __be64 integrity_check_value; +} __packed; + +struct osd_timestamp { + u8 time[6]; /* number of milliseconds since 1/1/1970 UT (big endian) */ +} __packed; +/* FIXME: define helper functions to convert to/from osd time format */ + +/* + * Capability & Security definitions + * osd2r03: 4.11.2.2 Capability format + * osd2r03: 5.2.8 Security parameters + */ + +struct osd_key_identifier { + u8 id[7]; /* if you know why 7 please email bharrosh@panasas.com */ +} __packed; + +/* for osd_capability.format */ +enum { + OSD_SEC_CAP_FORMAT_NO_CAPS = 0, + OSD_SEC_CAP_FORMAT_VER1 = 1, + OSD_SEC_CAP_FORMAT_VER2 = 2, +}; + +/* security_method */ +enum { + OSD_SEC_NOSEC = 0, + OSD_SEC_CAPKEY = 1, + OSD_SEC_CMDRSP = 2, + OSD_SEC_ALLDATA = 3, +}; + +enum object_type { + OSD_SEC_OBJ_ROOT = 0x1, + OSD_SEC_OBJ_PARTITION = 0x2, + OSD_SEC_OBJ_COLLECTION = 0x40, + OSD_SEC_OBJ_USER = 0x80, +}; + +enum osd_capability_bit_masks { + OSD_SEC_CAP_APPEND = BIT(0), + OSD_SEC_CAP_OBJ_MGMT = BIT(1), + OSD_SEC_CAP_REMOVE = BIT(2), + OSD_SEC_CAP_CREATE = BIT(3), + OSD_SEC_CAP_SET_ATTR = BIT(4), + OSD_SEC_CAP_GET_ATTR = BIT(5), + OSD_SEC_CAP_WRITE = BIT(6), + OSD_SEC_CAP_READ = BIT(7), + + OSD_SEC_CAP_NONE1 = BIT(8), + OSD_SEC_CAP_NONE2 = BIT(9), + OSD_SEC_CAP_NONE3 = BIT(10), + OSD_SEC_CAP_QUERY = BIT(11), /*v2 only*/ + OSD_SEC_CAP_M_OBJECT = BIT(12), /*v2 only*/ + OSD_SEC_CAP_POL_SEC = BIT(13), + OSD_SEC_CAP_GLOBAL = BIT(14), + OSD_SEC_CAP_DEV_MGMT = BIT(15), +}; + +/* for object_descriptor_type (hi nibble used) */ +enum { + OSD_SEC_OBJ_DESC_NONE = 0, /* Not allowed */ + OSD_SEC_OBJ_DESC_OBJ = 1 << 4, /* v1: also collection */ + OSD_SEC_OBJ_DESC_PAR = 2 << 4, /* also root */ + OSD_SEC_OBJ_DESC_COL = 3 << 4, /* v2 only */ +}; + +/* (osd-r10:4.9.2.2) + * osd2r03:4.11.2.2 Capability format + */ +struct osd_capability_head { + u8 format; /* low nibble */ + u8 integrity_algorithm__key_version; /* MAKE_BYTE(integ_alg, key_ver) */ + u8 security_method; + u8 reserved1; +/*04*/ struct osd_timestamp expiration_time; +/*10*/ u8 audit[20]; +/*30*/ u8 discriminator[12]; +/*42*/ struct osd_timestamp object_created_time; +/*48*/ u8 object_type; +/*49*/ u8 permissions_bit_mask[5]; +/*54*/ u8 reserved2; +/*55*/ u8 object_descriptor_type; /* high nibble */ +} __packed; + +/*56 v1*/ +struct osdv1_cap_object_descriptor { + union { + struct { +/*56*/ __be32 policy_access_tag; +/*60*/ __be64 allowed_partition_id; +/*68*/ __be64 allowed_object_id; +/*76*/ __be32 reserved; + } __packed obj_desc; + +/*56*/ u8 object_descriptor[24]; + }; +} __packed; +/*80 v1*/ + +struct osd_capability { + struct osd_capability_head h; + struct osdv1_cap_object_descriptor od; +} __packed; + +/** + * osd_sec_set_caps - set cap-bits into the capabilities header + * + * @cap: The osd_capability_head to set cap bits to. + * @bit_mask: Use an ORed list of enum osd_capability_bit_masks values + * + * permissions_bit_mask is unaligned use below to set into caps + * in a version independent way + */ +static inline void osd_sec_set_caps(struct osd_capability_head *cap, + u16 bit_mask) +{ + /* + *Note: The bits above are defined LE order this is because this way + * they can grow in the future to more then 16, and still retain + * there constant values. + */ + put_unaligned_le16(bit_mask, &cap->permissions_bit_mask); +} + +#endif /* ndef __OSD_PROTOCOL_H__ */ diff --git a/include/scsi/osd_sec.h b/include/scsi/osd_sec.h new file mode 100644 index 0000000..4c09fee --- /dev/null +++ b/include/scsi/osd_sec.h @@ -0,0 +1,45 @@ +/* + * osd_sec.h - OSD security manager API + * + * Copyright (C) 2008 Panasas Inc. All rights reserved. + * + * Authors: + * Boaz Harrosh + * Benny Halevy + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 + * + */ +#ifndef __OSD_SEC_H__ +#define __OSD_SEC_H__ + +#include "osd_protocol.h" +#include "osd_types.h" + +/* + * Contains types and constants of osd capabilities and security + * encoding/decoding. + * API is trying to keep security abstract so initiator of an object + * based pNFS client knows as little as possible about security and + * capabilities. It is the Server's osd-initiator place to know more. + * Also can be used by osd-target. + */ +void osd_sec_encode_caps(void *caps, ...);/* NI */ +void osd_sec_init_nosec_doall_caps(void *caps, + const struct osd_obj_id *obj, bool is_collection, const bool is_v1); + +bool osd_is_sec_alldata(struct osd_security_parameters *sec_params); + +/* Conditionally sign the CDB according to security setting in ocdb + * with cap_key */ +void osd_sec_sign_cdb(struct osd_cdb *ocdb, const u8 *cap_key); + +/* Unconditionally sign the BIO data with cap_key. + * Check for osd_is_sec_alldata() was done prior to calling this. */ +void osd_sec_sign_data(void *data_integ, struct bio *bio, const u8 *cap_key); + +/* Version independent copy of caps into the cdb */ +void osd_set_caps(struct osd_cdb *cdb, const void *caps); + +#endif /* ndef __OSD_SEC_H__ */ diff --git a/include/scsi/osd_types.h b/include/scsi/osd_types.h new file mode 100644 index 0000000..3f5e88c --- /dev/null +++ b/include/scsi/osd_types.h @@ -0,0 +1,40 @@ +/* + * osd_types.h - Types and constants which are not part of the protocol. + * + * Copyright (C) 2008 Panasas Inc. All rights reserved. + * + * Authors: + * Boaz Harrosh + * Benny Halevy + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 + * + * Contains types and constants that are implementation specific and are + * used by more than one part of the osd library. + * (Eg initiator/target/security_manager/...) + */ +#ifndef __OSD_TYPES_H__ +#define __OSD_TYPES_H__ + +struct osd_systemid { + u8 data[OSD_SYSTEMID_LEN]; +}; + +typedef u64 __bitwise osd_id; + +struct osd_obj_id { + osd_id partition; + osd_id id; +}; + +static const struct __weak osd_obj_id osd_root_object = {0, 0}; + +struct osd_attr { + u32 attr_page; + u32 attr_id; + u16 len; /* byte count of operand */ + void *val_ptr; /* in network order */ +}; + +#endif /* ndef __OSD_TYPES_H__ */ -- cgit v0.10.2 From 02941a530ef736210b4cf8b24dd34c238d5d5a40 Mon Sep 17 00:00:00 2001 From: Boaz Harrosh Date: Sun, 25 Jan 2009 16:55:30 +0200 Subject: [SCSI] libosd: OSDv1 preliminary implementation Implementation of the most basic OSD functionality and infrastructure. Mainly Format, Create/Remove Partition, Create/Remove Object, and read/write. - Add Makefile and Kbuild to compile libosd.ko - osd_initiator.c Implementation file for osd_initiator.h and osd_sec.h APIs - osd_debug.h - Some kprintf macro definitions Signed-off-by: Boaz Harrosh Reviewed-by: Benny Halevy Signed-off-by: James Bottomley diff --git a/drivers/scsi/osd/Kbuild b/drivers/scsi/osd/Kbuild new file mode 100644 index 0000000..a95e025 --- /dev/null +++ b/drivers/scsi/osd/Kbuild @@ -0,0 +1,32 @@ +# +# Kbuild for the OSD modules +# +# Copyright (C) 2008 Panasas Inc. All rights reserved. +# +# Authors: +# Boaz Harrosh +# Benny Halevy +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License version 2 +# + +ifneq ($(OSD_INC),) +# we are built out-of-tree Kconfigure everything as on + +CONFIG_SCSI_OSD_INITIATOR=m +ccflags-y += -DCONFIG_SCSI_OSD_INITIATOR -DCONFIG_SCSI_OSD_INITIATOR_MODULE + +# Uncomment to turn debug on +# ccflags-y += -DCONFIG_SCSI_OSD_DEBUG + +# if we are built out-of-tree and the hosting kernel has OSD headers +# then "ccflags-y +=" will not pick the out-off-tree headers. Only by doing +# this it will work. This might break in future kernels +LINUXINCLUDE := -I$(OSD_INC) $(LINUXINCLUDE) + +endif + +# libosd.ko - osd-initiator library +libosd-y := osd_initiator.o +obj-$(CONFIG_SCSI_OSD_INITIATOR) += libosd.o diff --git a/drivers/scsi/osd/Makefile b/drivers/scsi/osd/Makefile new file mode 100755 index 0000000..d905344 --- /dev/null +++ b/drivers/scsi/osd/Makefile @@ -0,0 +1,37 @@ +# +# Makefile for the OSD modules (out of tree) +# +# Copyright (C) 2008 Panasas Inc. All rights reserved. +# +# Authors: +# Boaz Harrosh +# Benny Halevy +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License version 2 +# +# This Makefile is used to call the kernel Makefile in case of an out-of-tree +# build. +# $KSRC should point to a Kernel source tree otherwise host's default is +# used. (eg. /lib/modules/`uname -r`/build) + +# include path for out-of-tree Headers +OSD_INC ?= `pwd`/../../../include + +# allow users to override these +# e.g. to compile for a kernel that you aren't currently running +KSRC ?= /lib/modules/$(shell uname -r)/build +KBUILD_OUTPUT ?= +ARCH ?= +V ?= 0 + +# this is the basic Kbuild out-of-tree invocation, with the M= option +KBUILD_BASE = +$(MAKE) -C $(KSRC) M=`pwd` KBUILD_OUTPUT=$(KBUILD_OUTPUT) ARCH=$(ARCH) V=$(V) + +all: libosd + +libosd: ; + $(KBUILD_BASE) OSD_INC=$(OSD_INC) modules + +clean: + $(KBUILD_BASE) clean diff --git a/drivers/scsi/osd/osd_debug.h b/drivers/scsi/osd/osd_debug.h new file mode 100644 index 0000000..579e491 --- /dev/null +++ b/drivers/scsi/osd/osd_debug.h @@ -0,0 +1,30 @@ +/* + * osd_debug.h - Some kprintf macros + * + * Copyright (C) 2008 Panasas Inc. All rights reserved. + * + * Authors: + * Boaz Harrosh + * Benny Halevy + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 + * + */ +#ifndef __OSD_DEBUG_H__ +#define __OSD_DEBUG_H__ + +#define OSD_ERR(fmt, a...) printk(KERN_ERR "osd: " fmt, ##a) +#define OSD_INFO(fmt, a...) printk(KERN_NOTICE "osd: " fmt, ##a) + +#ifdef CONFIG_SCSI_OSD_DEBUG +#define OSD_DEBUG(fmt, a...) \ + printk(KERN_NOTICE "osd @%s:%d: " fmt, __func__, __LINE__, ##a) +#else +#define OSD_DEBUG(fmt, a...) do {} while (0) +#endif + +/* u64 has problems with printk this will cast it to unsigned long long */ +#define _LLU(x) (unsigned long long)(x) + +#endif /* ndef __OSD_DEBUG_H__ */ diff --git a/drivers/scsi/osd/osd_initiator.c b/drivers/scsi/osd/osd_initiator.c new file mode 100644 index 0000000..0e6d906 --- /dev/null +++ b/drivers/scsi/osd/osd_initiator.c @@ -0,0 +1,448 @@ +/* + * osd_initiator - Main body of the osd initiator library. + * + * Note: The file does not contain the advanced security functionality which + * is only needed by the security_manager's initiators. + * + * Copyright (C) 2008 Panasas Inc. All rights reserved. + * + * Authors: + * Boaz Harrosh + * Benny Halevy + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. Neither the name of the Panasas company nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR + * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF + * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING + * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#include +#include +#include + +#include "osd_debug.h" + +enum { OSD_REQ_RETRIES = 1 }; + +MODULE_AUTHOR("Boaz Harrosh "); +MODULE_DESCRIPTION("open-osd initiator library libosd.ko"); +MODULE_LICENSE("GPL"); + +static inline void build_test(void) +{ + /* structures were not packed */ + BUILD_BUG_ON(sizeof(struct osd_capability) != OSD_CAP_LEN); + BUILD_BUG_ON(sizeof(struct osdv1_cdb) != OSDv1_TOTAL_CDB_LEN); +} + +static unsigned _osd_req_cdb_len(struct osd_request *or) +{ + return OSDv1_TOTAL_CDB_LEN; +} + +void osd_dev_init(struct osd_dev *osdd, struct scsi_device *scsi_device) +{ + memset(osdd, 0, sizeof(*osdd)); + osdd->scsi_device = scsi_device; + osdd->def_timeout = BLK_DEFAULT_SG_TIMEOUT; + /* TODO: Allocate pools for osd_request attributes ... */ +} +EXPORT_SYMBOL(osd_dev_init); + +void osd_dev_fini(struct osd_dev *osdd) +{ + /* TODO: De-allocate pools */ + + osdd->scsi_device = NULL; +} +EXPORT_SYMBOL(osd_dev_fini); + +static struct osd_request *_osd_request_alloc(gfp_t gfp) +{ + struct osd_request *or; + + /* TODO: Use mempool with one saved request */ + or = kzalloc(sizeof(*or), gfp); + return or; +} + +static void _osd_request_free(struct osd_request *or) +{ + kfree(or); +} + +struct osd_request *osd_start_request(struct osd_dev *dev, gfp_t gfp) +{ + struct osd_request *or; + + or = _osd_request_alloc(gfp); + if (!or) + return NULL; + + or->osd_dev = dev; + or->alloc_flags = gfp; + or->timeout = dev->def_timeout; + or->retries = OSD_REQ_RETRIES; + + return or; +} +EXPORT_SYMBOL(osd_start_request); + +/* + * If osd_finalize_request() was called but the request was not executed through + * the block layer, then we must release BIOs. + */ +static void _abort_unexecuted_bios(struct request *rq) +{ + struct bio *bio; + + while ((bio = rq->bio) != NULL) { + rq->bio = bio->bi_next; + bio_endio(bio, 0); + } +} + +void osd_end_request(struct osd_request *or) +{ + struct request *rq = or->request; + + if (rq) { + if (rq->next_rq) { + _abort_unexecuted_bios(rq->next_rq); + blk_put_request(rq->next_rq); + } + + _abort_unexecuted_bios(rq); + blk_put_request(rq); + } + _osd_request_free(or); +} +EXPORT_SYMBOL(osd_end_request); + +int osd_execute_request(struct osd_request *or) +{ + return blk_execute_rq(or->request->q, NULL, or->request, 0); +} +EXPORT_SYMBOL(osd_execute_request); + +static void osd_request_async_done(struct request *req, int error) +{ + struct osd_request *or = req->end_io_data; + + or->async_error = error; + + if (error) + OSD_DEBUG("osd_request_async_done error recieved %d\n", error); + + if (or->async_done) + or->async_done(or, or->async_private); + else + osd_end_request(or); +} + +int osd_execute_request_async(struct osd_request *or, + osd_req_done_fn *done, void *private) +{ + or->request->end_io_data = or; + or->async_private = private; + or->async_done = done; + + blk_execute_rq_nowait(or->request->q, NULL, or->request, 0, + osd_request_async_done); + return 0; +} +EXPORT_SYMBOL(osd_execute_request_async); + +/* + * Common to all OSD commands + */ + +static void _osdv1_req_encode_common(struct osd_request *or, + __be16 act, const struct osd_obj_id *obj, u64 offset, u64 len) +{ + struct osdv1_cdb *ocdb = &or->cdb.v1; + + /* + * For speed, the commands + * OSD_ACT_PERFORM_SCSI_COMMAND , V1 0x8F7E, V2 0x8F7C + * OSD_ACT_SCSI_TASK_MANAGEMENT , V1 0x8F7F, V2 0x8F7D + * are not supported here. Should pass zero and set after the call + */ + act &= cpu_to_be16(~0x0080); /* V1 action code */ + + OSD_DEBUG("OSDv1 execute opcode 0x%x\n", be16_to_cpu(act)); + + ocdb->h.varlen_cdb.opcode = VARIABLE_LENGTH_CMD; + ocdb->h.varlen_cdb.additional_cdb_length = OSD_ADDITIONAL_CDB_LENGTH; + ocdb->h.varlen_cdb.service_action = act; + + ocdb->h.partition = cpu_to_be64(obj->partition); + ocdb->h.object = cpu_to_be64(obj->id); + ocdb->h.v1.length = cpu_to_be64(len); + ocdb->h.v1.start_address = cpu_to_be64(offset); +} + +static void _osd_req_encode_common(struct osd_request *or, + __be16 act, const struct osd_obj_id *obj, u64 offset, u64 len) +{ + _osdv1_req_encode_common(or, act, obj, offset, len); +} + +/* + * Device commands + */ +void osd_req_format(struct osd_request *or, u64 tot_capacity) +{ + _osd_req_encode_common(or, OSD_ACT_FORMAT_OSD, &osd_root_object, 0, + tot_capacity); +} +EXPORT_SYMBOL(osd_req_format); + +/* + * Partition commands + */ +static void _osd_req_encode_partition(struct osd_request *or, + __be16 act, osd_id partition) +{ + struct osd_obj_id par = { + .partition = partition, + .id = 0, + }; + + _osd_req_encode_common(or, act, &par, 0, 0); +} + +void osd_req_create_partition(struct osd_request *or, osd_id partition) +{ + _osd_req_encode_partition(or, OSD_ACT_CREATE_PARTITION, partition); +} +EXPORT_SYMBOL(osd_req_create_partition); + +void osd_req_remove_partition(struct osd_request *or, osd_id partition) +{ + _osd_req_encode_partition(or, OSD_ACT_REMOVE_PARTITION, partition); +} +EXPORT_SYMBOL(osd_req_remove_partition); + +/* + * Object commands + */ +void osd_req_create_object(struct osd_request *or, struct osd_obj_id *obj) +{ + _osd_req_encode_common(or, OSD_ACT_CREATE, obj, 0, 0); +} +EXPORT_SYMBOL(osd_req_create_object); + +void osd_req_remove_object(struct osd_request *or, struct osd_obj_id *obj) +{ + _osd_req_encode_common(or, OSD_ACT_REMOVE, obj, 0, 0); +} +EXPORT_SYMBOL(osd_req_remove_object); + +void osd_req_write(struct osd_request *or, + const struct osd_obj_id *obj, struct bio *bio, u64 offset) +{ + _osd_req_encode_common(or, OSD_ACT_WRITE, obj, offset, bio->bi_size); + WARN_ON(or->out.bio || or->out.total_bytes); + bio->bi_rw |= (1 << BIO_RW); + or->out.bio = bio; + or->out.total_bytes = bio->bi_size; +} +EXPORT_SYMBOL(osd_req_write); + +void osd_req_read(struct osd_request *or, + const struct osd_obj_id *obj, struct bio *bio, u64 offset) +{ + _osd_req_encode_common(or, OSD_ACT_READ, obj, offset, bio->bi_size); + WARN_ON(or->in.bio || or->in.total_bytes); + bio->bi_rw &= ~(1 << BIO_RW); + or->in.bio = bio; + or->in.total_bytes = bio->bi_size; +} +EXPORT_SYMBOL(osd_req_read); + +/* + * osd_finalize_request and helpers + */ + +static int _init_blk_request(struct osd_request *or, + bool has_in, bool has_out) +{ + gfp_t flags = or->alloc_flags; + struct scsi_device *scsi_device = or->osd_dev->scsi_device; + struct request_queue *q = scsi_device->request_queue; + struct request *req; + int ret = -ENOMEM; + + req = blk_get_request(q, has_out, flags); + if (!req) + goto out; + + or->request = req; + req->cmd_type = REQ_TYPE_BLOCK_PC; + req->timeout = or->timeout; + req->retries = or->retries; + req->sense = or->sense; + req->sense_len = 0; + + if (has_out) { + or->out.req = req; + if (has_in) { + /* allocate bidi request */ + req = blk_get_request(q, READ, flags); + if (!req) { + OSD_DEBUG("blk_get_request for bidi failed\n"); + goto out; + } + req->cmd_type = REQ_TYPE_BLOCK_PC; + or->in.req = or->request->next_rq = req; + } + } else if (has_in) + or->in.req = req; + + ret = 0; +out: + OSD_DEBUG("or=%p has_in=%d has_out=%d => %d, %p\n", + or, has_in, has_out, ret, or->request); + return ret; +} + +int osd_finalize_request(struct osd_request *or, + u8 options, const void *cap, const u8 *cap_key) +{ + struct osd_cdb_head *cdbh = osd_cdb_head(&or->cdb); + bool has_in, has_out; + int ret; + + if (options & OSD_REQ_FUA) + cdbh->options |= OSD_CDB_FUA; + + if (options & OSD_REQ_DPO) + cdbh->options |= OSD_CDB_DPO; + + if (options & OSD_REQ_BYPASS_TIMESTAMPS) + cdbh->timestamp_control = OSD_CDB_BYPASS_TIMESTAMPS; + + osd_set_caps(&or->cdb, cap); + + has_in = or->in.bio || or->get_attr.total_bytes; + has_out = or->out.bio || or->set_attr.total_bytes || + or->enc_get_attr.total_bytes; + + ret = _init_blk_request(or, has_in, has_out); + if (ret) { + OSD_DEBUG("_init_blk_request failed\n"); + return ret; + } + + if (or->out.bio) { + ret = blk_rq_append_bio(or->request->q, or->out.req, + or->out.bio); + if (ret) { + OSD_DEBUG("blk_rq_append_bio out failed\n"); + return ret; + } + OSD_DEBUG("out bytes=%llu (bytes_req=%u)\n", + _LLU(or->out.total_bytes), or->out.req->data_len); + } + if (or->in.bio) { + ret = blk_rq_append_bio(or->request->q, or->in.req, or->in.bio); + if (ret) { + OSD_DEBUG("blk_rq_append_bio in failed\n"); + return ret; + } + OSD_DEBUG("in bytes=%llu (bytes_req=%u)\n", + _LLU(or->in.total_bytes), or->in.req->data_len); + } + + if (!or->attributes_mode) + or->attributes_mode = OSD_CDB_GET_SET_ATTR_LISTS; + cdbh->command_specific_options |= or->attributes_mode; + + or->request->cmd = or->cdb.buff; + or->request->cmd_len = _osd_req_cdb_len(or); + + return 0; +} +EXPORT_SYMBOL(osd_finalize_request); + +/* + * Implementation of osd_sec.h API + * TODO: Move to a separate osd_sec.c file at a later stage. + */ + +enum { OSD_SEC_CAP_V1_ALL_CAPS = + OSD_SEC_CAP_APPEND | OSD_SEC_CAP_OBJ_MGMT | OSD_SEC_CAP_REMOVE | + OSD_SEC_CAP_CREATE | OSD_SEC_CAP_SET_ATTR | OSD_SEC_CAP_GET_ATTR | + OSD_SEC_CAP_WRITE | OSD_SEC_CAP_READ | OSD_SEC_CAP_POL_SEC | + OSD_SEC_CAP_GLOBAL | OSD_SEC_CAP_DEV_MGMT +}; + +void osd_sec_init_nosec_doall_caps(void *caps, + const struct osd_obj_id *obj, bool is_collection, const bool is_v1) +{ + struct osd_capability *cap = caps; + u8 type; + u8 descriptor_type; + + if (likely(obj->id)) { + if (unlikely(is_collection)) { + type = OSD_SEC_OBJ_COLLECTION; + descriptor_type = is_v1 ? OSD_SEC_OBJ_DESC_OBJ : + OSD_SEC_OBJ_DESC_COL; + } else { + type = OSD_SEC_OBJ_USER; + descriptor_type = OSD_SEC_OBJ_DESC_OBJ; + } + WARN_ON(!obj->partition); + } else { + type = obj->partition ? OSD_SEC_OBJ_PARTITION : + OSD_SEC_OBJ_ROOT; + descriptor_type = OSD_SEC_OBJ_DESC_PAR; + } + + memset(cap, 0, sizeof(*cap)); + + cap->h.format = OSD_SEC_CAP_FORMAT_VER1; + cap->h.integrity_algorithm__key_version = 0; /* MAKE_BYTE(0, 0); */ + cap->h.security_method = OSD_SEC_NOSEC; +/* cap->expiration_time; + cap->AUDIT[30-10]; + cap->discriminator[42-30]; + cap->object_created_time; */ + cap->h.object_type = type; + osd_sec_set_caps(&cap->h, OSD_SEC_CAP_V1_ALL_CAPS); + cap->h.object_descriptor_type = descriptor_type; + cap->od.obj_desc.policy_access_tag = 0; + cap->od.obj_desc.allowed_partition_id = cpu_to_be64(obj->partition); + cap->od.obj_desc.allowed_object_id = cpu_to_be64(obj->id); +} +EXPORT_SYMBOL(osd_sec_init_nosec_doall_caps); + +void osd_set_caps(struct osd_cdb *cdb, const void *caps) +{ + memcpy(&cdb->v1.caps, caps, OSDv1_CAP_LEN); +} -- cgit v0.10.2 From 95b05a7db5865855c32e0bb8b244c3a7aac1cfeb Mon Sep 17 00:00:00 2001 From: Boaz Harrosh Date: Sun, 25 Jan 2009 16:56:47 +0200 Subject: [SCSI] osd_uld: OSD scsi ULD Add a Linux driver module that registers as a SCSI ULD and probes for OSD type SCSI devices. When an OSD-type SCSI device is found a character device is created in the form of /dev/osdX - where X goes from 0 up to hard coded 64. The Major character device number used is 260. Signed-off-by: Boaz Harrosh Reviewed-by: Benny Halevy Signed-off-by: James Bottomley diff --git a/drivers/scsi/osd/Kbuild b/drivers/scsi/osd/Kbuild index a95e025..9d38248 100644 --- a/drivers/scsi/osd/Kbuild +++ b/drivers/scsi/osd/Kbuild @@ -17,6 +17,9 @@ ifneq ($(OSD_INC),) CONFIG_SCSI_OSD_INITIATOR=m ccflags-y += -DCONFIG_SCSI_OSD_INITIATOR -DCONFIG_SCSI_OSD_INITIATOR_MODULE +CONFIG_SCSI_OSD_ULD=m +ccflags-y += -DCONFIG_SCSI_OSD_ULD -DCONFIG_SCSI_OSD_ULD_MODULE + # Uncomment to turn debug on # ccflags-y += -DCONFIG_SCSI_OSD_DEBUG @@ -30,3 +33,7 @@ endif # libosd.ko - osd-initiator library libosd-y := osd_initiator.o obj-$(CONFIG_SCSI_OSD_INITIATOR) += libosd.o + +# osd.ko - SCSI ULD and char-device +osd-y := osd_uld.o +obj-$(CONFIG_SCSI_OSD_ULD) += osd.o diff --git a/drivers/scsi/osd/osd_uld.c b/drivers/scsi/osd/osd_uld.c new file mode 100644 index 0000000..f6f9a99 --- /dev/null +++ b/drivers/scsi/osd/osd_uld.c @@ -0,0 +1,419 @@ +/* + * osd_uld.c - OSD Upper Layer Driver + * + * A Linux driver module that registers as a SCSI ULD and probes + * for OSD type SCSI devices. + * It's main function is to export osd devices to in-kernel users like + * osdfs and pNFS-objects-LD. It also provides one ioctl for running + * in Kernel tests. + * + * Copyright (C) 2008 Panasas Inc. All rights reserved. + * + * Authors: + * Boaz Harrosh + * Benny Halevy + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. Neither the name of the Panasas company nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR + * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF + * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING + * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include + +#include +#include + +#include "osd_debug.h" + +#ifndef TYPE_OSD +# define TYPE_OSD 0x11 +#endif + +#ifndef SCSI_OSD_MAJOR +# define SCSI_OSD_MAJOR 260 +#endif +#define SCSI_OSD_MAX_MINOR 64 + +static const char osd_name[] = "osd"; +static const char *osd_version_string = "open-osd 0.1.0"; +const char osd_symlink[] = "scsi_osd"; + +MODULE_AUTHOR("Boaz Harrosh "); +MODULE_DESCRIPTION("open-osd Upper-Layer-Driver osd.ko"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS_CHARDEV_MAJOR(SCSI_OSD_MAJOR); +MODULE_ALIAS_SCSI_DEVICE(TYPE_OSD); + +struct osd_uld_device { + int minor; + struct kref kref; + struct cdev cdev; + struct osd_dev od; + struct gendisk *disk; + struct device *class_member; +}; + +static void __uld_get(struct osd_uld_device *oud); +static void __uld_put(struct osd_uld_device *oud); + +/* + * Char Device operations + */ + +static int osd_uld_open(struct inode *inode, struct file *file) +{ + struct osd_uld_device *oud = container_of(inode->i_cdev, + struct osd_uld_device, cdev); + + __uld_get(oud); + /* cache osd_uld_device on file handle */ + file->private_data = oud; + OSD_DEBUG("osd_uld_open %p\n", oud); + return 0; +} + +static int osd_uld_release(struct inode *inode, struct file *file) +{ + struct osd_uld_device *oud = file->private_data; + + OSD_DEBUG("osd_uld_release %p\n", file->private_data); + file->private_data = NULL; + __uld_put(oud); + return 0; +} + +/* FIXME: Only one vector for now */ +unsigned g_test_ioctl; +do_test_fn *g_do_test; + +int osduld_register_test(unsigned ioctl, do_test_fn *do_test) +{ + if (g_test_ioctl) + return -EINVAL; + + g_test_ioctl = ioctl; + g_do_test = do_test; + return 0; +} +EXPORT_SYMBOL(osduld_register_test); + +void osduld_unregister_test(unsigned ioctl) +{ + if (ioctl == g_test_ioctl) { + g_test_ioctl = 0; + g_do_test = NULL; + } +} +EXPORT_SYMBOL(osduld_unregister_test); + +static do_test_fn *_find_ioctl(unsigned cmd) +{ + if (g_test_ioctl == cmd) + return g_do_test; + else + return NULL; +} + +static long osd_uld_ioctl(struct file *file, unsigned int cmd, + unsigned long arg) +{ + struct osd_uld_device *oud = file->private_data; + int ret; + do_test_fn *do_test; + + do_test = _find_ioctl(cmd); + if (do_test) + ret = do_test(&oud->od, cmd, arg); + else { + OSD_ERR("Unknown ioctl %d: osd_uld_device=%p\n", cmd, oud); + ret = -ENOIOCTLCMD; + } + return ret; +} + +static const struct file_operations osd_fops = { + .owner = THIS_MODULE, + .open = osd_uld_open, + .release = osd_uld_release, + .unlocked_ioctl = osd_uld_ioctl, +}; + +/* + * Scsi Device operations + */ + +static int __detect_osd(struct osd_uld_device *oud) +{ + struct scsi_device *scsi_device = oud->od.scsi_device; + int error; + + /* sending a test_unit_ready as first command seems to be needed + * by some targets + */ + OSD_DEBUG("start scsi_test_unit_ready %p %p %p\n", + oud, scsi_device, scsi_device->request_queue); + error = scsi_test_unit_ready(scsi_device, 10*HZ, 5, NULL); + if (error) + OSD_ERR("warning: scsi_test_unit_ready failed\n"); + + return 0; +} + +static struct class *osd_sysfs_class; +static DEFINE_IDA(osd_minor_ida); + +static int osd_probe(struct device *dev) +{ + struct scsi_device *scsi_device = to_scsi_device(dev); + struct gendisk *disk; + struct osd_uld_device *oud; + int minor; + int error; + + if (scsi_device->type != TYPE_OSD) + return -ENODEV; + + do { + if (!ida_pre_get(&osd_minor_ida, GFP_KERNEL)) + return -ENODEV; + + error = ida_get_new(&osd_minor_ida, &minor); + } while (error == -EAGAIN); + + if (error) + return error; + if (minor >= SCSI_OSD_MAX_MINOR) { + error = -EBUSY; + goto err_retract_minor; + } + + error = -ENOMEM; + oud = kzalloc(sizeof(*oud), GFP_KERNEL); + if (NULL == oud) + goto err_retract_minor; + + kref_init(&oud->kref); + dev_set_drvdata(dev, oud); + oud->minor = minor; + + /* allocate a disk and set it up */ + /* FIXME: do we need this since sg has already done that */ + disk = alloc_disk(1); + if (!disk) { + OSD_ERR("alloc_disk failed\n"); + goto err_free_osd; + } + disk->major = SCSI_OSD_MAJOR; + disk->first_minor = oud->minor; + sprintf(disk->disk_name, "osd%d", oud->minor); + oud->disk = disk; + + /* hold one more reference to the scsi_device that will get released + * in __release, in case a logout is happening while fs is mounted + */ + scsi_device_get(scsi_device); + osd_dev_init(&oud->od, scsi_device); + + /* Detect the OSD Version */ + error = __detect_osd(oud); + if (error) { + OSD_ERR("osd detection failed, non-compatible OSD device\n"); + goto err_put_disk; + } + + /* init the char-device for communication with user-mode */ + cdev_init(&oud->cdev, &osd_fops); + oud->cdev.owner = THIS_MODULE; + error = cdev_add(&oud->cdev, + MKDEV(SCSI_OSD_MAJOR, oud->minor), 1); + if (error) { + OSD_ERR("cdev_add failed\n"); + goto err_put_disk; + } + kobject_get(&oud->cdev.kobj); /* 2nd ref see osd_remove() */ + + /* class_member */ + oud->class_member = device_create(osd_sysfs_class, dev, + MKDEV(SCSI_OSD_MAJOR, oud->minor), "%s", disk->disk_name); + if (IS_ERR(oud->class_member)) { + OSD_ERR("class_device_create failed\n"); + error = PTR_ERR(oud->class_member); + goto err_put_cdev; + } + + dev_set_drvdata(oud->class_member, oud); + error = sysfs_create_link(&scsi_device->sdev_gendev.kobj, + &oud->class_member->kobj, osd_symlink); + if (error) + OSD_ERR("warning: unable to make symlink\n"); + + OSD_INFO("osd_probe %s\n", disk->disk_name); + return 0; + +err_put_cdev: + cdev_del(&oud->cdev); +err_put_disk: + scsi_device_put(scsi_device); + put_disk(disk); +err_free_osd: + dev_set_drvdata(dev, NULL); + kfree(oud); +err_retract_minor: + ida_remove(&osd_minor_ida, minor); + return error; +} + +static int osd_remove(struct device *dev) +{ + struct scsi_device *scsi_device = to_scsi_device(dev); + struct osd_uld_device *oud = dev_get_drvdata(dev); + + if (!oud || (oud->od.scsi_device != scsi_device)) { + OSD_ERR("Half cooked osd-device %p,%p || %p!=%p", + dev, oud, oud ? oud->od.scsi_device : NULL, + scsi_device); + } + + sysfs_remove_link(&oud->od.scsi_device->sdev_gendev.kobj, osd_symlink); + + if (oud->class_member) + device_destroy(osd_sysfs_class, + MKDEV(SCSI_OSD_MAJOR, oud->minor)); + + /* We have 2 references to the cdev. One is released here + * and also takes down the /dev/osdX mapping. The second + * Will be released in __remove() after all users have released + * the osd_uld_device. + */ + if (oud->cdev.owner) + cdev_del(&oud->cdev); + + __uld_put(oud); + return 0; +} + +static void __remove(struct kref *kref) +{ + struct osd_uld_device *oud = container_of(kref, + struct osd_uld_device, kref); + struct scsi_device *scsi_device = oud->od.scsi_device; + + /* now let delete the char_dev */ + kobject_put(&oud->cdev.kobj); + + osd_dev_fini(&oud->od); + scsi_device_put(scsi_device); + + OSD_INFO("osd_remove %s\n", + oud->disk ? oud->disk->disk_name : NULL); + + if (oud->disk) + put_disk(oud->disk); + + ida_remove(&osd_minor_ida, oud->minor); + kfree(oud); +} + +static void __uld_get(struct osd_uld_device *oud) +{ + kref_get(&oud->kref); +} + +static void __uld_put(struct osd_uld_device *oud) +{ + kref_put(&oud->kref, __remove); +} + +/* + * Global driver and scsi registration + */ + +static struct scsi_driver osd_driver = { + .owner = THIS_MODULE, + .gendrv = { + .name = osd_name, + .probe = osd_probe, + .remove = osd_remove, + } +}; + +static int __init osd_uld_init(void) +{ + int err; + + osd_sysfs_class = class_create(THIS_MODULE, osd_symlink); + if (IS_ERR(osd_sysfs_class)) { + OSD_ERR("Unable to register sysfs class => %ld\n", + PTR_ERR(osd_sysfs_class)); + return PTR_ERR(osd_sysfs_class); + } + + err = register_chrdev_region(MKDEV(SCSI_OSD_MAJOR, 0), + SCSI_OSD_MAX_MINOR, osd_name); + if (err) { + OSD_ERR("Unable to register major %d for osd ULD => %d\n", + SCSI_OSD_MAJOR, err); + goto err_out; + } + + err = scsi_register_driver(&osd_driver.gendrv); + if (err) { + OSD_ERR("scsi_register_driver failed => %d\n", err); + goto err_out_chrdev; + } + + OSD_INFO("LOADED %s\n", osd_version_string); + return 0; + +err_out_chrdev: + unregister_chrdev_region(MKDEV(SCSI_OSD_MAJOR, 0), SCSI_OSD_MAX_MINOR); +err_out: + class_destroy(osd_sysfs_class); + return err; +} + +static void __exit osd_uld_exit(void) +{ + scsi_unregister_driver(&osd_driver.gendrv); + unregister_chrdev_region(MKDEV(SCSI_OSD_MAJOR, 0), SCSI_OSD_MAX_MINOR); + class_destroy(osd_sysfs_class); + OSD_INFO("UNLOADED %s\n", osd_version_string); +} + +module_init(osd_uld_init); +module_exit(osd_uld_exit); diff --git a/include/scsi/osd_initiator.h b/include/scsi/osd_initiator.h index 1d92247..a5dbbdd 100644 --- a/include/scsi/osd_initiator.h +++ b/include/scsi/osd_initiator.h @@ -33,6 +33,12 @@ struct osd_dev { unsigned def_timeout; }; +/* Add/remove test ioctls from external modules */ +typedef int (do_test_fn)(struct osd_dev *od, unsigned cmd, unsigned long arg); +int osduld_register_test(unsigned ioctl, do_test_fn *do_test); +void osduld_unregister_test(unsigned ioctl); + +/* These are called by uld at probe time */ void osd_dev_init(struct osd_dev *od, struct scsi_device *scsi_device); void osd_dev_fini(struct osd_dev *od); -- cgit v0.10.2 From b799bc7da0ce5ba4a988c521a8fb10452eb419f0 Mon Sep 17 00:00:00 2001 From: Boaz Harrosh Date: Sun, 25 Jan 2009 16:58:03 +0200 Subject: [SCSI] osd_uld: API for retrieving osd devices from Kernel Kernel clients like exofs can retrieve struct osd_dev(s) by means of below API. + osduld_path_lookup() - given a path (e.g "/dev/osd0") locks and returns the corresponding struct osd_dev, which is then needed for subsequent libosd use. + osduld_put_device() - free up use of an osd_dev. Devices can be shared by multiple clients. The osd_uld_device's life time is governed by an embedded kref structure. The osd_uld_device holds an extra reference to both it's char-device and it's scsi_device, and will release these just before the final deallocation. There are three possible lock sources of the osd_uld_device 1. First and for most is the probe() function called by scsi-ml upon a successful login into a target. Released in release() when logout. 2. Second by user-mode file handles opened on the char-dev. 3. Third is here by Kernel users. All three locks must be removed before the osd_uld_device is freed. The MODULE has three lock sources as well: 1. scsi-ml at probe() time, removed after release(). (login/logout) 2. The user-mode file handles open/close. 3. Import symbols by client modules like exofs. TODO: This API is not enough for the pNFS-objects LD. A more versatile API will be needed. Proposed API could be: struct osd_dev *osduld_sysid_lookup(const char id[OSD_SYSTEMID_LEN]); Signed-off-by: Boaz Harrosh Signed-off-by: James Bottomley diff --git a/drivers/scsi/osd/osd_uld.c b/drivers/scsi/osd/osd_uld.c index f6f9a99..cd4ca7c 100644 --- a/drivers/scsi/osd/osd_uld.c +++ b/drivers/scsi/osd/osd_uld.c @@ -173,6 +173,69 @@ static const struct file_operations osd_fops = { .unlocked_ioctl = osd_uld_ioctl, }; +struct osd_dev *osduld_path_lookup(const char *path) +{ + struct nameidata nd; + struct inode *inode; + struct cdev *cdev; + struct osd_uld_device *uninitialized_var(oud); + int error; + + if (!path || !*path) { + OSD_ERR("Mount with !path || !*path\n"); + return ERR_PTR(-EINVAL); + } + + error = path_lookup(path, LOOKUP_FOLLOW, &nd); + if (error) { + OSD_ERR("path_lookup of %s faild=>%d\n", path, error); + return ERR_PTR(error); + } + + inode = nd.path.dentry->d_inode; + error = -EINVAL; /* Not the right device e.g osd_uld_device */ + if (!S_ISCHR(inode->i_mode)) { + OSD_DEBUG("!S_ISCHR()\n"); + goto out; + } + + cdev = inode->i_cdev; + if (!cdev) { + OSD_ERR("Before mounting an OSD Based filesystem\n"); + OSD_ERR(" user-mode must open+close the %s device\n", path); + OSD_ERR(" Example: bash: echo < %s\n", path); + goto out; + } + + /* The Magic wand. Is it our char-dev */ + /* TODO: Support sg devices */ + if (cdev->owner != THIS_MODULE) { + OSD_ERR("Error mounting %s - is not an OSD device\n", path); + goto out; + } + + oud = container_of(cdev, struct osd_uld_device, cdev); + + __uld_get(oud); + error = 0; + +out: + path_put(&nd.path); + return error ? ERR_PTR(error) : &oud->od; +} +EXPORT_SYMBOL(osduld_path_lookup); + +void osduld_put_device(struct osd_dev *od) +{ + if (od) { + struct osd_uld_device *oud = container_of(od, + struct osd_uld_device, od); + + __uld_put(oud); + } +} +EXPORT_SYMBOL(osduld_put_device); + /* * Scsi Device operations */ diff --git a/include/scsi/osd_initiator.h b/include/scsi/osd_initiator.h index a5dbbdd..e84dc7a 100644 --- a/include/scsi/osd_initiator.h +++ b/include/scsi/osd_initiator.h @@ -33,6 +33,10 @@ struct osd_dev { unsigned def_timeout; }; +/* Retrieve/return osd_dev(s) for use by Kernel clients */ +struct osd_dev *osduld_path_lookup(const char *dev_name); /*Use IS_ERR/ERR_PTR*/ +void osduld_put_device(struct osd_dev *od); + /* Add/remove test ioctls from external modules */ typedef int (do_test_fn)(struct osd_dev *od, unsigned cmd, unsigned long arg); int osduld_register_test(unsigned ioctl, do_test_fn *do_test); -- cgit v0.10.2 From 4ef1a3d70d02663f6bfe901db629e8e608da15b1 Mon Sep 17 00:00:00 2001 From: Boaz Harrosh Date: Sun, 25 Jan 2009 16:59:50 +0200 Subject: [SCSI] libosd: attributes Support Support for both List-Mode and Page-Mode osd attributes. One of these operations may be added to most other operations. Define the OSD standard's attribute pages constants and structures (osd_attributes.h) Signed-off-by: Boaz Harrosh Reviewed-by: Benny Halevy Signed-off-by: James Bottomley diff --git a/drivers/scsi/osd/osd_initiator.c b/drivers/scsi/osd/osd_initiator.c index 0e6d906..b982d76 100644 --- a/drivers/scsi/osd/osd_initiator.c +++ b/drivers/scsi/osd/osd_initiator.c @@ -45,6 +45,10 @@ #include "osd_debug.h" +#ifndef __unused +# define __unused __attribute__((unused)) +#endif + enum { OSD_REQ_RETRIES = 1 }; MODULE_AUTHOR("Boaz Harrosh "); @@ -63,6 +67,50 @@ static unsigned _osd_req_cdb_len(struct osd_request *or) return OSDv1_TOTAL_CDB_LEN; } +static unsigned _osd_req_alist_elem_size(struct osd_request *or, unsigned len) +{ + return osdv1_attr_list_elem_size(len); +} + +static unsigned _osd_req_alist_size(struct osd_request *or, void *list_head) +{ + return osdv1_list_size(list_head); +} + +static unsigned _osd_req_sizeof_alist_header(struct osd_request *or) +{ + return sizeof(struct osdv1_attributes_list_header); +} + +static void _osd_req_set_alist_type(struct osd_request *or, + void *list, int list_type) +{ + struct osdv1_attributes_list_header *attr_list = list; + + memset(attr_list, 0, sizeof(*attr_list)); + attr_list->type = list_type; +} + +static bool _osd_req_is_alist_type(struct osd_request *or, + void *list, int list_type) +{ + if (!list) + return false; + + if (1) { + struct osdv1_attributes_list_header *attr_list = list; + + return attr_list->type == list_type; + } +} + +static osd_cdb_offset osd_req_encode_offset(struct osd_request *or, + u64 offset, unsigned *padding) +{ + return __osd_encode_offset(offset, padding, + OSDv1_OFFSET_MIN_SHIFT, OSD_OFFSET_MAX_SHIFT); +} + void osd_dev_init(struct osd_dev *osdd, struct scsi_device *scsi_device) { memset(osdd, 0, sizeof(*osdd)); @@ -125,10 +173,25 @@ static void _abort_unexecuted_bios(struct request *rq) } } +static void _osd_free_seg(struct osd_request *or __unused, + struct _osd_req_data_segment *seg) +{ + if (!seg->buff || !seg->alloc_size) + return; + + kfree(seg->buff); + seg->buff = NULL; + seg->alloc_size = 0; +} + void osd_end_request(struct osd_request *or) { struct request *rq = or->request; + _osd_free_seg(or, &or->set_attr); + _osd_free_seg(or, &or->enc_get_attr); + _osd_free_seg(or, &or->get_attr); + if (rq) { if (rq->next_rq) { _abort_unexecuted_bios(rq->next_rq); @@ -176,6 +239,54 @@ int osd_execute_request_async(struct osd_request *or, } EXPORT_SYMBOL(osd_execute_request_async); +u8 sg_out_pad_buffer[1 << OSDv1_OFFSET_MIN_SHIFT]; +u8 sg_in_pad_buffer[1 << OSDv1_OFFSET_MIN_SHIFT]; + +static int _osd_realloc_seg(struct osd_request *or, + struct _osd_req_data_segment *seg, unsigned max_bytes) +{ + void *buff; + + if (seg->alloc_size >= max_bytes) + return 0; + + buff = krealloc(seg->buff, max_bytes, or->alloc_flags); + if (!buff) { + OSD_ERR("Failed to Realloc %d-bytes was-%d\n", max_bytes, + seg->alloc_size); + return -ENOMEM; + } + + memset(buff + seg->alloc_size, 0, max_bytes - seg->alloc_size); + seg->buff = buff; + seg->alloc_size = max_bytes; + return 0; +} + +static int _alloc_set_attr_list(struct osd_request *or, + const struct osd_attr *oa, unsigned nelem, unsigned add_bytes) +{ + unsigned total_bytes = add_bytes; + + for (; nelem; --nelem, ++oa) + total_bytes += _osd_req_alist_elem_size(or, oa->len); + + OSD_DEBUG("total_bytes=%d\n", total_bytes); + return _osd_realloc_seg(or, &or->set_attr, total_bytes); +} + +static int _alloc_get_attr_desc(struct osd_request *or, unsigned max_bytes) +{ + OSD_DEBUG("total_bytes=%d\n", max_bytes); + return _osd_realloc_seg(or, &or->enc_get_attr, max_bytes); +} + +static int _alloc_get_attr_list(struct osd_request *or) +{ + OSD_DEBUG("total_bytes=%d\n", or->get_attr.total_bytes); + return _osd_realloc_seg(or, &or->get_attr, or->get_attr.total_bytes); +} + /* * Common to all OSD commands */ @@ -284,6 +395,410 @@ void osd_req_read(struct osd_request *or, } EXPORT_SYMBOL(osd_req_read); +void osd_req_get_attributes(struct osd_request *or, + const struct osd_obj_id *obj) +{ + _osd_req_encode_common(or, OSD_ACT_GET_ATTRIBUTES, obj, 0, 0); +} +EXPORT_SYMBOL(osd_req_get_attributes); + +void osd_req_set_attributes(struct osd_request *or, + const struct osd_obj_id *obj) +{ + _osd_req_encode_common(or, OSD_ACT_SET_ATTRIBUTES, obj, 0, 0); +} +EXPORT_SYMBOL(osd_req_set_attributes); + +/* + * Attributes List-mode + */ + +int osd_req_add_set_attr_list(struct osd_request *or, + const struct osd_attr *oa, unsigned nelem) +{ + unsigned total_bytes = or->set_attr.total_bytes; + void *attr_last; + int ret; + + if (or->attributes_mode && + or->attributes_mode != OSD_CDB_GET_SET_ATTR_LISTS) { + WARN_ON(1); + return -EINVAL; + } + or->attributes_mode = OSD_CDB_GET_SET_ATTR_LISTS; + + if (!total_bytes) { /* first-time: allocate and put list header */ + total_bytes = _osd_req_sizeof_alist_header(or); + ret = _alloc_set_attr_list(or, oa, nelem, total_bytes); + if (ret) + return ret; + _osd_req_set_alist_type(or, or->set_attr.buff, + OSD_ATTR_LIST_SET_RETRIEVE); + } + attr_last = or->set_attr.buff + total_bytes; + + for (; nelem; --nelem) { + struct osd_attributes_list_element *attr; + unsigned elem_size = _osd_req_alist_elem_size(or, oa->len); + + total_bytes += elem_size; + if (unlikely(or->set_attr.alloc_size < total_bytes)) { + or->set_attr.total_bytes = total_bytes - elem_size; + ret = _alloc_set_attr_list(or, oa, nelem, total_bytes); + if (ret) + return ret; + attr_last = + or->set_attr.buff + or->set_attr.total_bytes; + } + + attr = attr_last; + attr->attr_page = cpu_to_be32(oa->attr_page); + attr->attr_id = cpu_to_be32(oa->attr_id); + attr->attr_bytes = cpu_to_be16(oa->len); + memcpy(attr->attr_val, oa->val_ptr, oa->len); + + attr_last += elem_size; + ++oa; + } + + or->set_attr.total_bytes = total_bytes; + return 0; +} +EXPORT_SYMBOL(osd_req_add_set_attr_list); + +static int _append_map_kern(struct request *req, + void *buff, unsigned len, gfp_t flags) +{ + struct bio *bio; + int ret; + + bio = bio_map_kern(req->q, buff, len, flags); + if (IS_ERR(bio)) { + OSD_ERR("Failed bio_map_kern(%p, %d) => %ld\n", buff, len, + PTR_ERR(bio)); + return PTR_ERR(bio); + } + ret = blk_rq_append_bio(req->q, req, bio); + if (ret) { + OSD_ERR("Failed blk_rq_append_bio(%p) => %d\n", bio, ret); + bio_put(bio); + } + return ret; +} + +static int _req_append_segment(struct osd_request *or, + unsigned padding, struct _osd_req_data_segment *seg, + struct _osd_req_data_segment *last_seg, struct _osd_io_info *io) +{ + void *pad_buff; + int ret; + + if (padding) { + /* check if we can just add it to last buffer */ + if (last_seg && + (padding <= last_seg->alloc_size - last_seg->total_bytes)) + pad_buff = last_seg->buff + last_seg->total_bytes; + else + pad_buff = io->pad_buff; + + ret = _append_map_kern(io->req, pad_buff, padding, + or->alloc_flags); + if (ret) + return ret; + io->total_bytes += padding; + } + + ret = _append_map_kern(io->req, seg->buff, seg->total_bytes, + or->alloc_flags); + if (ret) + return ret; + + io->total_bytes += seg->total_bytes; + OSD_DEBUG("padding=%d buff=%p total_bytes=%d\n", padding, seg->buff, + seg->total_bytes); + return 0; +} + +static int _osd_req_finalize_set_attr_list(struct osd_request *or) +{ + struct osd_cdb_head *cdbh = osd_cdb_head(&or->cdb); + unsigned padding; + int ret; + + if (!or->set_attr.total_bytes) { + cdbh->attrs_list.set_attr_offset = OSD_OFFSET_UNUSED; + return 0; + } + + cdbh->attrs_list.set_attr_bytes = cpu_to_be32(or->set_attr.total_bytes); + cdbh->attrs_list.set_attr_offset = + osd_req_encode_offset(or, or->out.total_bytes, &padding); + + ret = _req_append_segment(or, padding, &or->set_attr, + or->out.last_seg, &or->out); + if (ret) + return ret; + + or->out.last_seg = &or->set_attr; + return 0; +} + +int osd_req_add_get_attr_list(struct osd_request *or, + const struct osd_attr *oa, unsigned nelem) +{ + unsigned total_bytes = or->enc_get_attr.total_bytes; + void *attr_last; + int ret; + + if (or->attributes_mode && + or->attributes_mode != OSD_CDB_GET_SET_ATTR_LISTS) { + WARN_ON(1); + return -EINVAL; + } + or->attributes_mode = OSD_CDB_GET_SET_ATTR_LISTS; + + /* first time calc data-in list header size */ + if (!or->get_attr.total_bytes) + or->get_attr.total_bytes = _osd_req_sizeof_alist_header(or); + + /* calc data-out info */ + if (!total_bytes) { /* first-time: allocate and put list header */ + unsigned max_bytes; + + total_bytes = _osd_req_sizeof_alist_header(or); + max_bytes = total_bytes + + nelem * sizeof(struct osd_attributes_list_attrid); + ret = _alloc_get_attr_desc(or, max_bytes); + if (ret) + return ret; + + _osd_req_set_alist_type(or, or->enc_get_attr.buff, + OSD_ATTR_LIST_GET); + } + attr_last = or->enc_get_attr.buff + total_bytes; + + for (; nelem; --nelem) { + struct osd_attributes_list_attrid *attrid; + const unsigned cur_size = sizeof(*attrid); + + total_bytes += cur_size; + if (unlikely(or->enc_get_attr.alloc_size < total_bytes)) { + or->enc_get_attr.total_bytes = total_bytes - cur_size; + ret = _alloc_get_attr_desc(or, + total_bytes + nelem * sizeof(*attrid)); + if (ret) + return ret; + attr_last = or->enc_get_attr.buff + + or->enc_get_attr.total_bytes; + } + + attrid = attr_last; + attrid->attr_page = cpu_to_be32(oa->attr_page); + attrid->attr_id = cpu_to_be32(oa->attr_id); + + attr_last += cur_size; + + /* calc data-in size */ + or->get_attr.total_bytes += + _osd_req_alist_elem_size(or, oa->len); + ++oa; + } + + or->enc_get_attr.total_bytes = total_bytes; + + OSD_DEBUG( + "get_attr.total_bytes=%u(%u) enc_get_attr.total_bytes=%u(%Zu)\n", + or->get_attr.total_bytes, + or->get_attr.total_bytes - _osd_req_sizeof_alist_header(or), + or->enc_get_attr.total_bytes, + (or->enc_get_attr.total_bytes - _osd_req_sizeof_alist_header(or)) + / sizeof(struct osd_attributes_list_attrid)); + + return 0; +} +EXPORT_SYMBOL(osd_req_add_get_attr_list); + +static int _osd_req_finalize_get_attr_list(struct osd_request *or) +{ + struct osd_cdb_head *cdbh = osd_cdb_head(&or->cdb); + unsigned out_padding; + unsigned in_padding; + int ret; + + if (!or->enc_get_attr.total_bytes) { + cdbh->attrs_list.get_attr_desc_offset = OSD_OFFSET_UNUSED; + cdbh->attrs_list.get_attr_offset = OSD_OFFSET_UNUSED; + return 0; + } + + ret = _alloc_get_attr_list(or); + if (ret) + return ret; + + /* The out-going buffer info update */ + OSD_DEBUG("out-going\n"); + cdbh->attrs_list.get_attr_desc_bytes = + cpu_to_be32(or->enc_get_attr.total_bytes); + + cdbh->attrs_list.get_attr_desc_offset = + osd_req_encode_offset(or, or->out.total_bytes, &out_padding); + + ret = _req_append_segment(or, out_padding, &or->enc_get_attr, + or->out.last_seg, &or->out); + if (ret) + return ret; + or->out.last_seg = &or->enc_get_attr; + + /* The incoming buffer info update */ + OSD_DEBUG("in-coming\n"); + cdbh->attrs_list.get_attr_alloc_length = + cpu_to_be32(or->get_attr.total_bytes); + + cdbh->attrs_list.get_attr_offset = + osd_req_encode_offset(or, or->in.total_bytes, &in_padding); + + ret = _req_append_segment(or, in_padding, &or->get_attr, NULL, + &or->in); + if (ret) + return ret; + or->in.last_seg = &or->get_attr; + + return 0; +} + +int osd_req_decode_get_attr_list(struct osd_request *or, + struct osd_attr *oa, int *nelem, void **iterator) +{ + unsigned cur_bytes, returned_bytes; + int n; + const unsigned sizeof_attr_list = _osd_req_sizeof_alist_header(or); + void *cur_p; + + if (!_osd_req_is_alist_type(or, or->get_attr.buff, + OSD_ATTR_LIST_SET_RETRIEVE)) { + oa->attr_page = 0; + oa->attr_id = 0; + oa->val_ptr = NULL; + oa->len = 0; + *iterator = NULL; + return 0; + } + + if (*iterator) { + BUG_ON((*iterator < or->get_attr.buff) || + (or->get_attr.buff + or->get_attr.alloc_size < *iterator)); + cur_p = *iterator; + cur_bytes = (*iterator - or->get_attr.buff) - sizeof_attr_list; + returned_bytes = or->get_attr.total_bytes; + } else { /* first time decode the list header */ + cur_bytes = sizeof_attr_list; + returned_bytes = _osd_req_alist_size(or, or->get_attr.buff) + + sizeof_attr_list; + + cur_p = or->get_attr.buff + sizeof_attr_list; + + if (returned_bytes > or->get_attr.alloc_size) { + OSD_DEBUG("target report: space was not big enough! " + "Allocate=%u Needed=%u\n", + or->get_attr.alloc_size, + returned_bytes + sizeof_attr_list); + + returned_bytes = + or->get_attr.alloc_size - sizeof_attr_list; + } + or->get_attr.total_bytes = returned_bytes; + } + + for (n = 0; (n < *nelem) && (cur_bytes < returned_bytes); ++n) { + struct osd_attributes_list_element *attr = cur_p; + unsigned inc; + + oa->len = be16_to_cpu(attr->attr_bytes); + inc = _osd_req_alist_elem_size(or, oa->len); + OSD_DEBUG("oa->len=%d inc=%d cur_bytes=%d\n", + oa->len, inc, cur_bytes); + cur_bytes += inc; + if (cur_bytes > returned_bytes) { + OSD_ERR("BAD FOOD from target. list not valid!" + "c=%d r=%d n=%d\n", + cur_bytes, returned_bytes, n); + oa->val_ptr = NULL; + break; + } + + oa->attr_page = be32_to_cpu(attr->attr_page); + oa->attr_id = be32_to_cpu(attr->attr_id); + oa->val_ptr = attr->attr_val; + + cur_p += inc; + ++oa; + } + + *iterator = (returned_bytes - cur_bytes) ? cur_p : NULL; + *nelem = n; + return returned_bytes - cur_bytes; +} +EXPORT_SYMBOL(osd_req_decode_get_attr_list); + +/* + * Attributes Page-mode + */ + +int osd_req_add_get_attr_page(struct osd_request *or, + u32 page_id, void *attar_page, unsigned max_page_len, + const struct osd_attr *set_one_attr) +{ + struct osd_cdb_head *cdbh = osd_cdb_head(&or->cdb); + + if (or->attributes_mode && + or->attributes_mode != OSD_CDB_GET_ATTR_PAGE_SET_ONE) { + WARN_ON(1); + return -EINVAL; + } + or->attributes_mode = OSD_CDB_GET_ATTR_PAGE_SET_ONE; + + or->get_attr.buff = attar_page; + or->get_attr.total_bytes = max_page_len; + + or->set_attr.buff = set_one_attr->val_ptr; + or->set_attr.total_bytes = set_one_attr->len; + + cdbh->attrs_page.get_attr_page = cpu_to_be32(page_id); + cdbh->attrs_page.get_attr_alloc_length = cpu_to_be32(max_page_len); + /* ocdb->attrs_page.get_attr_offset; */ + + cdbh->attrs_page.set_attr_page = cpu_to_be32(set_one_attr->attr_page); + cdbh->attrs_page.set_attr_id = cpu_to_be32(set_one_attr->attr_id); + cdbh->attrs_page.set_attr_length = cpu_to_be32(set_one_attr->len); + /* ocdb->attrs_page.set_attr_offset; */ + return 0; +} +EXPORT_SYMBOL(osd_req_add_get_attr_page); + +static int _osd_req_finalize_attr_page(struct osd_request *or) +{ + struct osd_cdb_head *cdbh = osd_cdb_head(&or->cdb); + unsigned in_padding, out_padding; + int ret; + + /* returned page */ + cdbh->attrs_page.get_attr_offset = + osd_req_encode_offset(or, or->in.total_bytes, &in_padding); + + ret = _req_append_segment(or, in_padding, &or->get_attr, NULL, + &or->in); + if (ret) + return ret; + + /* set one value */ + cdbh->attrs_page.set_attr_offset = + osd_req_encode_offset(or, or->out.total_bytes, &out_padding); + + ret = _req_append_segment(or, out_padding, &or->enc_get_attr, NULL, + &or->out); + return ret; +} + /* * osd_finalize_request and helpers */ @@ -378,9 +893,31 @@ int osd_finalize_request(struct osd_request *or, _LLU(or->in.total_bytes), or->in.req->data_len); } + or->out.pad_buff = sg_out_pad_buffer; + or->in.pad_buff = sg_in_pad_buffer; + if (!or->attributes_mode) or->attributes_mode = OSD_CDB_GET_SET_ATTR_LISTS; cdbh->command_specific_options |= or->attributes_mode; + if (or->attributes_mode == OSD_CDB_GET_ATTR_PAGE_SET_ONE) { + ret = _osd_req_finalize_attr_page(or); + } else { + /* TODO: I think that for the GET_ATTR command these 2 should + * be reversed to keep them in execution order (for embeded + * targets with low memory footprint) + */ + ret = _osd_req_finalize_set_attr_list(or); + if (ret) { + OSD_DEBUG("_osd_req_finalize_set_attr_list failed\n"); + return ret; + } + + ret = _osd_req_finalize_get_attr_list(or); + if (ret) { + OSD_DEBUG("_osd_req_finalize_get_attr_list failed\n"); + return ret; + } + } or->request->cmd = or->cdb.buff; or->request->cmd_len = _osd_req_cdb_len(or); @@ -446,3 +983,45 @@ void osd_set_caps(struct osd_cdb *cdb, const void *caps) { memcpy(&cdb->v1.caps, caps, OSDv1_CAP_LEN); } + +/* + * Declared in osd_protocol.h + * 4.12.5 Data-In and Data-Out buffer offsets + * byte offset = mantissa * (2^(exponent+8)) + * Returns the smallest allowed encoded offset that contains given @offset + * The actual encoded offset returned is @offset + *@padding. + */ +osd_cdb_offset __osd_encode_offset( + u64 offset, unsigned *padding, int min_shift, int max_shift) +{ + u64 try_offset = -1, mod, align; + osd_cdb_offset be32_offset; + int shift; + + *padding = 0; + if (!offset) + return 0; + + for (shift = min_shift; shift < max_shift; ++shift) { + try_offset = offset >> shift; + if (try_offset < (1 << OSD_OFFSET_MAX_BITS)) + break; + } + + BUG_ON(shift == max_shift); + + align = 1 << shift; + mod = offset & (align - 1); + if (mod) { + *padding = align - mod; + try_offset += 1; + } + + try_offset |= ((shift - 8) & 0xf) << 28; + be32_offset = cpu_to_be32((u32)try_offset); + + OSD_DEBUG("offset=%llu mantissa=%llu exp=%d encoded=%x pad=%d\n", + _LLU(offset), _LLU(try_offset & 0x0FFFFFFF), shift, + be32_offset, *padding); + return be32_offset; +} diff --git a/include/scsi/osd_attributes.h b/include/scsi/osd_attributes.h new file mode 100644 index 0000000..f888a6f --- /dev/null +++ b/include/scsi/osd_attributes.h @@ -0,0 +1,327 @@ +#ifndef __OSD_ATTRIBUTES_H__ +#define __OSD_ATTRIBUTES_H__ + +#include "osd_protocol.h" + +/* + * Contains types and constants that define attribute pages and attribute + * numbers and their data types. + */ + +#define ATTR_SET(pg, id, l, ptr) \ + { .attr_page = pg, .attr_id = id, .len = l, .val_ptr = ptr } + +#define ATTR_DEF(pg, id, l) ATTR_SET(pg, id, l, NULL) + +/* osd-r10 4.7.3 Attributes pages */ +enum { + OSD_APAGE_OBJECT_FIRST = 0x0, + OSD_APAGE_OBJECT_DIRECTORY = 0, + OSD_APAGE_OBJECT_INFORMATION = 1, + OSD_APAGE_OBJECT_QUOTAS = 2, + OSD_APAGE_OBJECT_TIMESTAMP = 3, + OSD_APAGE_OBJECT_COLLECTIONS = 4, + OSD_APAGE_OBJECT_SECURITY = 5, + OSD_APAGE_OBJECT_LAST = 0x2fffffff, + + OSD_APAGE_PARTITION_FIRST = 0x30000000, + OSD_APAGE_PARTITION_DIRECTORY = OSD_APAGE_PARTITION_FIRST + 0, + OSD_APAGE_PARTITION_INFORMATION = OSD_APAGE_PARTITION_FIRST + 1, + OSD_APAGE_PARTITION_QUOTAS = OSD_APAGE_PARTITION_FIRST + 2, + OSD_APAGE_PARTITION_TIMESTAMP = OSD_APAGE_PARTITION_FIRST + 3, + OSD_APAGE_PARTITION_SECURITY = OSD_APAGE_PARTITION_FIRST + 5, + OSD_APAGE_PARTITION_LAST = 0x5FFFFFFF, + + OSD_APAGE_COLLECTION_FIRST = 0x60000000, + OSD_APAGE_COLLECTION_DIRECTORY = OSD_APAGE_COLLECTION_FIRST + 0, + OSD_APAGE_COLLECTION_INFORMATION = OSD_APAGE_COLLECTION_FIRST + 1, + OSD_APAGE_COLLECTION_TIMESTAMP = OSD_APAGE_COLLECTION_FIRST + 3, + OSD_APAGE_COLLECTION_SECURITY = OSD_APAGE_COLLECTION_FIRST + 5, + OSD_APAGE_COLLECTION_LAST = 0x8FFFFFFF, + + OSD_APAGE_ROOT_FIRST = 0x90000000, + OSD_APAGE_ROOT_DIRECTORY = OSD_APAGE_ROOT_FIRST + 0, + OSD_APAGE_ROOT_INFORMATION = OSD_APAGE_ROOT_FIRST + 1, + OSD_APAGE_ROOT_QUOTAS = OSD_APAGE_ROOT_FIRST + 2, + OSD_APAGE_ROOT_TIMESTAMP = OSD_APAGE_ROOT_FIRST + 3, + OSD_APAGE_ROOT_SECURITY = OSD_APAGE_ROOT_FIRST + 5, + OSD_APAGE_ROOT_LAST = 0xBFFFFFFF, + + OSD_APAGE_RESERVED_TYPE_FIRST = 0xC0000000, + OSD_APAGE_RESERVED_TYPE_LAST = 0xEFFFFFFF, + + OSD_APAGE_COMMON_FIRST = 0xF0000000, + OSD_APAGE_COMMON_LAST = 0xFFFFFFFE, + + OSD_APAGE_REQUEST_ALL = 0xFFFFFFFF, +}; + +/* subcategories of attr pages within each range above */ +enum { + OSD_APAGE_STD_FIRST = 0x0, + OSD_APAGE_STD_DIRECTORY = 0, + OSD_APAGE_STD_INFORMATION = 1, + OSD_APAGE_STD_QUOTAS = 2, + OSD_APAGE_STD_TIMESTAMP = 3, + OSD_APAGE_STD_COLLECTIONS = 4, + OSD_APAGE_STD_POLICY_SECURITY = 5, + OSD_APAGE_STD_LAST = 0x0000007F, + + OSD_APAGE_RESERVED_FIRST = 0x00000080, + OSD_APAGE_RESERVED_LAST = 0x00007FFF, + + OSD_APAGE_OTHER_STD_FIRST = 0x00008000, + OSD_APAGE_OTHER_STD_LAST = 0x0000EFFF, + + OSD_APAGE_PUBLIC_FIRST = 0x0000F000, + OSD_APAGE_PUBLIC_LAST = 0x0000FFFF, + + OSD_APAGE_APP_DEFINED_FIRST = 0x00010000, + OSD_APAGE_APP_DEFINED_LAST = 0x1FFFFFFF, + + OSD_APAGE_VENDOR_SPECIFIC_FIRST = 0x20000000, + OSD_APAGE_VENDOR_SPECIFIC_LAST = 0x2FFFFFFF, +}; + +enum { + OSD_ATTR_PAGE_IDENTIFICATION = 0, /* in all pages 40 bytes */ +}; + +struct page_identification { + u8 vendor_identification[8]; + u8 page_identification[32]; +} __packed; + +struct osd_attr_page_header { + __be32 page_number; + __be32 page_length; +} __packed; + +/* 7.1.2.8 Root Information attributes page (OSD_APAGE_ROOT_INFORMATION) */ +enum { + OSD_ATTR_RI_OSD_SYSTEM_ID = 0x3, /* 20 */ + OSD_ATTR_RI_VENDOR_IDENTIFICATION = 0x4, /* 8 */ + OSD_ATTR_RI_PRODUCT_IDENTIFICATION = 0x5, /* 16 */ + OSD_ATTR_RI_PRODUCT_MODEL = 0x6, /* 32 */ + OSD_ATTR_RI_PRODUCT_REVISION_LEVEL = 0x7, /* 4 */ + OSD_ATTR_RI_PRODUCT_SERIAL_NUMBER = 0x8, /* variable */ + OSD_ATTR_RI_OSD_NAME = 0x9, /* variable */ + OSD_ATTR_RI_TOTAL_CAPACITY = 0x80, /* 8 */ + OSD_ATTR_RI_USED_CAPACITY = 0x81, /* 8 */ + OSD_ATTR_RI_NUMBER_OF_PARTITIONS = 0xC0, /* 8 */ + OSD_ATTR_RI_CLOCK = 0x100, /* 6 */ +}; +/* Root_Information_attributes_page does not have a get_page structure */ + +/* 7.1.2.9 Partition Information attributes page + * (OSD_APAGE_PARTITION_INFORMATION) + */ +enum { + OSD_ATTR_PI_PARTITION_ID = 0x1, /* 8 */ + OSD_ATTR_PI_USERNAME = 0x9, /* variable */ + OSD_ATTR_PI_USED_CAPACITY = 0x81, /* 8 */ + OSD_ATTR_PI_NUMBER_OF_OBJECTS = 0xC1, /* 8 */ +}; +/* Partition Information attributes page does not have a get_page structure */ + +/* 7.1.2.10 Collection Information attributes page + * (OSD_APAGE_COLLECTION_INFORMATION) + */ +enum { + OSD_ATTR_CI_PARTITION_ID = 0x1, /* 8 */ + OSD_ATTR_CI_COLLECTION_OBJECT_ID = 0x2, /* 8 */ + OSD_ATTR_CI_USERNAME = 0x9, /* variable */ + OSD_ATTR_CI_USED_CAPACITY = 0x81, /* 8 */ +}; +/* Collection Information attributes page does not have a get_page structure */ + +/* 7.1.2.11 User Object Information attributes page + * (OSD_APAGE_OBJECT_INFORMATION) + */ +enum { + OSD_ATTR_OI_PARTITION_ID = 0x1, /* 8 */ + OSD_ATTR_OI_OBJECT_ID = 0x2, /* 8 */ + OSD_ATTR_OI_USERNAME = 0x9, /* variable */ + OSD_ATTR_OI_USED_CAPACITY = 0x81, /* 8 */ + OSD_ATTR_OI_LOGICAL_LENGTH = 0x82, /* 8 */ +}; +/* Object Information attributes page does not have a get_page structure */ + +/* 7.1.2.12 Root Quotas attributes page (OSD_APAGE_ROOT_QUOTAS) */ +enum { + OSD_ATTR_RQ_DEFAULT_MAXIMUM_USER_OBJECT_LENGTH = 0x1, /* 8 */ + OSD_ATTR_RQ_PARTITION_CAPACITY_QUOTA = 0x10001, /* 8 */ + OSD_ATTR_RQ_PARTITION_OBJECT_COUNT = 0x10002, /* 8 */ + OSD_ATTR_RQ_PARTITION_COLLECTIONS_PER_USER_OBJECT = 0x10081, /* 4 */ + OSD_ATTR_RQ_PARTITION_COUNT = 0x20002, /* 8 */ +}; + +struct Root_Quotas_attributes_page { + struct osd_attr_page_header hdr; /* id=R+2, size=0x24 */ + __be64 default_maximum_user_object_length; + __be64 partition_capacity_quota; + __be64 partition_object_count; + __be64 partition_collections_per_user_object; + __be64 partition_count; +} __packed; + +/* 7.1.2.13 Partition Quotas attributes page (OSD_APAGE_PARTITION_QUOTAS)*/ +enum { + OSD_ATTR_PQ_DEFAULT_MAXIMUM_USER_OBJECT_LENGTH = 0x1, /* 8 */ + OSD_ATTR_PQ_CAPACITY_QUOTA = 0x10001, /* 8 */ + OSD_ATTR_PQ_OBJECT_COUNT = 0x10002, /* 8 */ + OSD_ATTR_PQ_COLLECTIONS_PER_USER_OBJECT = 0x10081, /* 4 */ +}; + +struct Partition_Quotas_attributes_page { + struct osd_attr_page_header hdr; /* id=P+2, size=0x1C */ + __be64 default_maximum_user_object_length; + __be64 capacity_quota; + __be64 object_count; + __be64 collections_per_user_object; +} __packed; + +/* 7.1.2.14 User Object Quotas attributes page (OSD_APAGE_OBJECT_QUOTAS) */ +enum { + OSD_ATTR_OQ_MAXIMUM_LENGTH = 0x1, /* 8 */ +}; + +struct Object_Quotas_attributes_page { + struct osd_attr_page_header hdr; /* id=U+2, size=0x8 */ + __be64 maximum_length; +} __packed; + +/* 7.1.2.15 Root Timestamps attributes page (OSD_APAGE_ROOT_TIMESTAMP) */ +enum { + OSD_ATTR_RT_ATTRIBUTES_ACCESSED_TIME = 0x2, /* 6 */ + OSD_ATTR_RT_ATTRIBUTES_MODIFIED_TIME = 0x3, /* 6 */ + OSD_ATTR_RT_TIMESTAMP_BYPASS = 0xFFFFFFFE, /* 1 */ +}; + +struct root_timestamps_attributes_page { + struct osd_attr_page_header hdr; /* id=R+3, size=0xD */ + struct osd_timestamp attributes_accessed_time; + struct osd_timestamp attributes_modified_time; + u8 timestamp_bypass; +} __packed; + +/* 7.1.2.16 Partition Timestamps attributes page + * (OSD_APAGE_PARTITION_TIMESTAMP) + */ +enum { + OSD_ATTR_PT_CREATED_TIME = 0x1, /* 6 */ + OSD_ATTR_PT_ATTRIBUTES_ACCESSED_TIME = 0x2, /* 6 */ + OSD_ATTR_PT_ATTRIBUTES_MODIFIED_TIME = 0x3, /* 6 */ + OSD_ATTR_PT_DATA_ACCESSED_TIME = 0x4, /* 6 */ + OSD_ATTR_PT_DATA_MODIFIED_TIME = 0x5, /* 6 */ + OSD_ATTR_PT_TIMESTAMP_BYPASS = 0xFFFFFFFE, /* 1 */ +}; + +struct partition_timestamps_attributes_page { + struct osd_attr_page_header hdr; /* id=P+3, size=0x1F */ + struct osd_timestamp created_time; + struct osd_timestamp attributes_accessed_time; + struct osd_timestamp attributes_modified_time; + struct osd_timestamp data_accessed_time; + struct osd_timestamp data_modified_time; + u8 timestamp_bypass; +} __packed; + +/* 7.1.2.17/18 Collection/Object Timestamps attributes page + * (OSD_APAGE_COLLECTION_TIMESTAMP/OSD_APAGE_OBJECT_TIMESTAMP) + */ +enum { + OSD_ATTR_OT_CREATED_TIME = 0x1, /* 6 */ + OSD_ATTR_OT_ATTRIBUTES_ACCESSED_TIME = 0x2, /* 6 */ + OSD_ATTR_OT_ATTRIBUTES_MODIFIED_TIME = 0x3, /* 6 */ + OSD_ATTR_OT_DATA_ACCESSED_TIME = 0x4, /* 6 */ + OSD_ATTR_OT_DATA_MODIFIED_TIME = 0x5, /* 6 */ +}; + +/* same for collection */ +struct object_timestamps_attributes_page { + struct osd_attr_page_header hdr; /* id=C+3/3, size=0x1E */ + struct osd_timestamp created_time; + struct osd_timestamp attributes_accessed_time; + struct osd_timestamp attributes_modified_time; + struct osd_timestamp data_accessed_time; + struct osd_timestamp data_modified_time; +} __packed; + +/* 7.1.2.19 Collections attributes page */ +/* TBD */ + +/* 7.1.2.20 Root Policy/Security attributes page (OSD_APAGE_ROOT_SECURITY) */ +enum { + OSD_ATTR_RS_DEFAULT_SECURITY_METHOD = 0x1, /* 1 */ + OSD_ATTR_RS_OLDEST_VALID_NONCE_LIMIT = 0x2, /* 6 */ + OSD_ATTR_RS_NEWEST_VALID_NONCE_LIMIT = 0x3, /* 6 */ + OSD_ATTR_RS_PARTITION_DEFAULT_SECURITY_METHOD = 0x6, /* 1 */ + OSD_ATTR_RS_SUPPORTED_SECURITY_METHODS = 0x7, /* 2 */ + OSD_ATTR_RS_ADJUSTABLE_CLOCK = 0x9, /* 6 */ + OSD_ATTR_RS_MASTER_KEY_IDENTIFIER = 0x7FFD, /* 0 or 7 */ + OSD_ATTR_RS_ROOT_KEY_IDENTIFIER = 0x7FFE, /* 0 or 7 */ + OSD_ATTR_RS_SUPPORTED_INTEGRITY_ALGORITHM_0 = 0x80000000,/* 1,(x16)*/ + OSD_ATTR_RS_SUPPORTED_DH_GROUP_0 = 0x80000010,/* 1,(x16)*/ +}; + +struct root_security_attributes_page { + struct osd_attr_page_header hdr; /* id=R+5, size=0x3F */ + u8 default_security_method; + u8 partition_default_security_method; + __be16 supported_security_methods; + u8 mki_valid_rki_valid; + struct osd_timestamp oldest_valid_nonce_limit; + struct osd_timestamp newest_valid_nonce_limit; + struct osd_timestamp adjustable_clock; + u8 master_key_identifier[32-25]; + u8 root_key_identifier[39-32]; + u8 supported_integrity_algorithm[16]; + u8 supported_dh_group[16]; +} __packed; + +/* 7.1.2.21 Partition Policy/Security attributes page + * (OSD_APAGE_PARTITION_SECURITY) + */ +enum { + OSD_ATTR_PS_DEFAULT_SECURITY_METHOD = 0x1, /* 1 */ + OSD_ATTR_PS_OLDEST_VALID_NONCE = 0x2, /* 6 */ + OSD_ATTR_PS_NEWEST_VALID_NONCE = 0x3, /* 6 */ + OSD_ATTR_PS_REQUEST_NONCE_LIST_DEPTH = 0x4, /* 2 */ + OSD_ATTR_PS_FROZEN_WORKING_KEY_BIT_MASK = 0x5, /* 2 */ + OSD_ATTR_PS_PARTITION_KEY_IDENTIFIER = 0x7FFF, /* 0 or 7 */ + OSD_ATTR_PS_WORKING_KEY_IDENTIFIER_FIRST = 0x8000, /* 0 or 7 */ + OSD_ATTR_PS_WORKING_KEY_IDENTIFIER_LAST = 0x800F, /* 0 or 7 */ + OSD_ATTR_PS_POLICY_ACCESS_TAG = 0x40000001, /* 4 */ + OSD_ATTR_PS_USER_OBJECT_POLICY_ACCESS_TAG = 0x40000002, /* 4 */ +}; + +struct partition_security_attributes_page { + struct osd_attr_page_header hdr; /* id=p+5, size=0x8f */ + u8 reserved[3]; + u8 default_security_method; + struct osd_timestamp oldest_valid_nonce; + struct osd_timestamp newest_valid_nonce; + __be16 request_nonce_list_depth; + __be16 frozen_working_key_bit_mask; + __be32 policy_access_tag; + __be32 user_object_policy_access_tag; + u8 pki_valid; + __be16 wki_00_0f_vld; + struct osd_key_identifier partition_key_identifier; + struct osd_key_identifier working_key_identifiers[16]; +} __packed; + +/* 7.1.2.22/23 Collection/Object Policy-Security attributes page + * (OSD_APAGE_COLLECTION_SECURITY/OSD_APAGE_OBJECT_SECURITY) + */ +enum { + OSD_ATTR_OS_POLICY_ACCESS_TAG = 0x40000001, /* 4 */ +}; + +struct object_security_attributes_page { + struct osd_attr_page_header hdr; /* id=C+5/5, size=4 */ + __be32 policy_access_tag; +} __packed; + +#endif /*ndef __OSD_ATTRIBUTES_H__*/ -- cgit v0.10.2 From 345c435dbb0b77b00ffe73801102533e24c647af Mon Sep 17 00:00:00 2001 From: Boaz Harrosh Date: Sun, 25 Jan 2009 17:03:07 +0200 Subject: [SCSI] libosd: OSD Security processing stubs Layout the signing of OSD's CDB and all-data security modes. The actual code for signing the data and CDB is missing, but the code flow and the extra buffer segments are all in place. Signed-off-by: Boaz Harrosh Reviewed-by: Benny Halevy Signed-off-by: James Bottomley diff --git a/drivers/scsi/osd/osd_initiator.c b/drivers/scsi/osd/osd_initiator.c index b982d76..6849f26 100644 --- a/drivers/scsi/osd/osd_initiator.c +++ b/drivers/scsi/osd/osd_initiator.c @@ -111,6 +111,14 @@ static osd_cdb_offset osd_req_encode_offset(struct osd_request *or, OSDv1_OFFSET_MIN_SHIFT, OSD_OFFSET_MAX_SHIFT); } +static struct osd_security_parameters * +_osd_req_sec_params(struct osd_request *or) +{ + struct osd_cdb *ocdb = &or->cdb; + + return &ocdb->v1.sec_params; +} + void osd_dev_init(struct osd_dev *osdd, struct scsi_device *scsi_device) { memset(osdd, 0, sizeof(*osdd)); @@ -799,6 +807,64 @@ static int _osd_req_finalize_attr_page(struct osd_request *or) return ret; } +static int _osd_req_finalize_data_integrity(struct osd_request *or, + bool has_in, bool has_out, const u8 *cap_key) +{ + struct osd_security_parameters *sec_parms = _osd_req_sec_params(or); + int ret; + + if (!osd_is_sec_alldata(sec_parms)) + return 0; + + if (has_out) { + struct _osd_req_data_segment seg = { + .buff = &or->out_data_integ, + .total_bytes = sizeof(or->out_data_integ), + }; + unsigned pad; + + or->out_data_integ.data_bytes = cpu_to_be64( + or->out.bio ? or->out.bio->bi_size : 0); + or->out_data_integ.set_attributes_bytes = cpu_to_be64( + or->set_attr.total_bytes); + or->out_data_integ.get_attributes_bytes = cpu_to_be64( + or->enc_get_attr.total_bytes); + + sec_parms->data_out_integrity_check_offset = + osd_req_encode_offset(or, or->out.total_bytes, &pad); + + ret = _req_append_segment(or, pad, &seg, or->out.last_seg, + &or->out); + if (ret) + return ret; + or->out.last_seg = NULL; + + /* they are now all chained to request sign them all together */ + osd_sec_sign_data(&or->out_data_integ, or->out.req->bio, + cap_key); + } + + if (has_in) { + struct _osd_req_data_segment seg = { + .buff = &or->in_data_integ, + .total_bytes = sizeof(or->in_data_integ), + }; + unsigned pad; + + sec_parms->data_in_integrity_check_offset = + osd_req_encode_offset(or, or->in.total_bytes, &pad); + + ret = _req_append_segment(or, pad, &seg, or->in.last_seg, + &or->in); + if (ret) + return ret; + + or->in.last_seg = NULL; + } + + return 0; +} + /* * osd_finalize_request and helpers */ @@ -919,6 +985,12 @@ int osd_finalize_request(struct osd_request *or, } } + ret = _osd_req_finalize_data_integrity(or, has_in, has_out, cap_key); + if (ret) + return ret; + + osd_sec_sign_cdb(&or->cdb, cap_key); + or->request->cmd = or->cdb.buff; or->request->cmd_len = _osd_req_cdb_len(or); @@ -984,6 +1056,20 @@ void osd_set_caps(struct osd_cdb *cdb, const void *caps) memcpy(&cdb->v1.caps, caps, OSDv1_CAP_LEN); } +bool osd_is_sec_alldata(struct osd_security_parameters *sec_parms __unused) +{ + return false; +} + +void osd_sec_sign_cdb(struct osd_cdb *ocdb __unused, const u8 *cap_key __unused) +{ +} + +void osd_sec_sign_data(void *data_integ __unused, + struct bio *bio __unused, const u8 *cap_key __unused) +{ +} + /* * Declared in osd_protocol.h * 4.12.5 Data-In and Data-Out buffer offsets -- cgit v0.10.2 From 3e08613037fd4ec0b716a215602c4bdb3d0d9171 Mon Sep 17 00:00:00 2001 From: Boaz Harrosh Date: Sun, 25 Jan 2009 17:05:07 +0200 Subject: [SCSI] libosd: Add Flush and List-objects support Add support for the various List-objects commands. List-partitions-in-device, List-collections-in-partition, List-objects-in-partition, List-objects-in-collection. All these support partial listing and continuation. Add support for the different Flush commands and options. Signed-off-by: Boaz Harrosh Reviewed-by: Benny Halevy Signed-off-by: James Bottomley diff --git a/drivers/scsi/osd/osd_initiator.c b/drivers/scsi/osd/osd_initiator.c index 6849f26..5d9457b 100644 --- a/drivers/scsi/osd/osd_initiator.c +++ b/drivers/scsi/osd/osd_initiator.c @@ -104,6 +104,16 @@ static bool _osd_req_is_alist_type(struct osd_request *or, } } +/* This is for List-objects not Attributes-Lists */ +static void _osd_req_encode_olist(struct osd_request *or, + struct osd_obj_id_list *list) +{ + struct osd_cdb_head *cdbh = osd_cdb_head(&or->cdb); + + cdbh->v1.list_identifier = list->list_identifier; + cdbh->v1.start_address = list->continuation_id; +} + static osd_cdb_offset osd_req_encode_offset(struct osd_request *or, u64 offset, unsigned *padding) { @@ -340,6 +350,29 @@ void osd_req_format(struct osd_request *or, u64 tot_capacity) } EXPORT_SYMBOL(osd_req_format); +int osd_req_list_dev_partitions(struct osd_request *or, + osd_id initial_id, struct osd_obj_id_list *list, unsigned nelem) +{ + return osd_req_list_partition_objects(or, 0, initial_id, list, nelem); +} +EXPORT_SYMBOL(osd_req_list_dev_partitions); + +static void _osd_req_encode_flush(struct osd_request *or, + enum osd_options_flush_scope_values op) +{ + struct osd_cdb_head *ocdb = osd_cdb_head(&or->cdb); + + ocdb->command_specific_options = op; +} + +void osd_req_flush_obsd(struct osd_request *or, + enum osd_options_flush_scope_values op) +{ + _osd_req_encode_common(or, OSD_ACT_FLUSH_OSD, &osd_root_object, 0, 0); + _osd_req_encode_flush(or, op); +} +EXPORT_SYMBOL(osd_req_flush_obsd); + /* * Partition commands */ @@ -366,6 +399,88 @@ void osd_req_remove_partition(struct osd_request *or, osd_id partition) } EXPORT_SYMBOL(osd_req_remove_partition); +static int _osd_req_list_objects(struct osd_request *or, + __be16 action, const struct osd_obj_id *obj, osd_id initial_id, + struct osd_obj_id_list *list, unsigned nelem) +{ + struct request_queue *q = or->osd_dev->scsi_device->request_queue; + u64 len = nelem * sizeof(osd_id) + sizeof(*list); + struct bio *bio; + + _osd_req_encode_common(or, action, obj, (u64)initial_id, len); + + if (list->list_identifier) + _osd_req_encode_olist(or, list); + + WARN_ON(or->in.bio); + bio = bio_map_kern(q, list, len, or->alloc_flags); + if (!bio) { + OSD_ERR("!!! Failed to allocate list_objects BIO\n"); + return -ENOMEM; + } + + bio->bi_rw &= ~(1 << BIO_RW); + or->in.bio = bio; + or->in.total_bytes = bio->bi_size; + return 0; +} + +int osd_req_list_partition_collections(struct osd_request *or, + osd_id partition, osd_id initial_id, struct osd_obj_id_list *list, + unsigned nelem) +{ + struct osd_obj_id par = { + .partition = partition, + .id = 0, + }; + + return osd_req_list_collection_objects(or, &par, initial_id, list, + nelem); +} +EXPORT_SYMBOL(osd_req_list_partition_collections); + +int osd_req_list_partition_objects(struct osd_request *or, + osd_id partition, osd_id initial_id, struct osd_obj_id_list *list, + unsigned nelem) +{ + struct osd_obj_id par = { + .partition = partition, + .id = 0, + }; + + return _osd_req_list_objects(or, OSD_ACT_LIST, &par, initial_id, list, + nelem); +} +EXPORT_SYMBOL(osd_req_list_partition_objects); + +void osd_req_flush_partition(struct osd_request *or, + osd_id partition, enum osd_options_flush_scope_values op) +{ + _osd_req_encode_partition(or, OSD_ACT_FLUSH_PARTITION, partition); + _osd_req_encode_flush(or, op); +} +EXPORT_SYMBOL(osd_req_flush_partition); + +/* + * Collection commands + */ +int osd_req_list_collection_objects(struct osd_request *or, + const struct osd_obj_id *obj, osd_id initial_id, + struct osd_obj_id_list *list, unsigned nelem) +{ + return _osd_req_list_objects(or, OSD_ACT_LIST_COLLECTION, obj, + initial_id, list, nelem); +} +EXPORT_SYMBOL(osd_req_list_collection_objects); + +void osd_req_flush_collection(struct osd_request *or, + const struct osd_obj_id *obj, enum osd_options_flush_scope_values op) +{ + _osd_req_encode_common(or, OSD_ACT_FLUSH_PARTITION, obj, 0, 0); + _osd_req_encode_flush(or, op); +} +EXPORT_SYMBOL(osd_req_flush_collection); + /* * Object commands */ @@ -392,6 +507,15 @@ void osd_req_write(struct osd_request *or, } EXPORT_SYMBOL(osd_req_write); +void osd_req_flush_object(struct osd_request *or, + const struct osd_obj_id *obj, enum osd_options_flush_scope_values op, + /*V2*/ u64 offset, /*V2*/ u64 len) +{ + _osd_req_encode_common(or, OSD_ACT_FLUSH, obj, offset, len); + _osd_req_encode_flush(or, op); +} +EXPORT_SYMBOL(osd_req_flush_object); + void osd_req_read(struct osd_request *or, const struct osd_obj_id *obj, struct bio *bio, u64 offset) { -- cgit v0.10.2 From ae30c994a4bb70510fdcb9e7223805bb2a8bc9ee Mon Sep 17 00:00:00 2001 From: Boaz Harrosh Date: Sun, 25 Jan 2009 17:07:14 +0200 Subject: [SCSI] libosd: Not implemented commands Some commands declared in header are not yet implemented. Put them as stubs in .c file, just so they take their place in the file Signed-off-by: Boaz Harrosh Reviewed-by: Benny Halevy Signed-off-by: James Bottomley diff --git a/drivers/scsi/osd/osd_initiator.c b/drivers/scsi/osd/osd_initiator.c index 5d9457b..3fd021a 100644 --- a/drivers/scsi/osd/osd_initiator.c +++ b/drivers/scsi/osd/osd_initiator.c @@ -343,6 +343,9 @@ static void _osd_req_encode_common(struct osd_request *or, /* * Device commands */ +/*TODO: void osd_req_set_master_seed_xchg(struct osd_request *, ...); */ +/*TODO: void osd_req_set_master_key(struct osd_request *, ...); */ + void osd_req_format(struct osd_request *or, u64 tot_capacity) { _osd_req_encode_common(or, OSD_ACT_FORMAT_OSD, &osd_root_object, 0, @@ -373,6 +376,10 @@ void osd_req_flush_obsd(struct osd_request *or, } EXPORT_SYMBOL(osd_req_flush_obsd); +/*TODO: void osd_req_perform_scsi_command(struct osd_request *, + const u8 *cdb, ...); */ +/*TODO: void osd_req_task_management(struct osd_request *, ...); */ + /* * Partition commands */ @@ -399,6 +406,10 @@ void osd_req_remove_partition(struct osd_request *or, osd_id partition) } EXPORT_SYMBOL(osd_req_remove_partition); +/*TODO: void osd_req_set_partition_key(struct osd_request *, + osd_id partition, u8 new_key_id[OSD_CRYPTO_KEYID_SIZE], + u8 seed[OSD_CRYPTO_SEED_SIZE]); */ + static int _osd_req_list_objects(struct osd_request *or, __be16 action, const struct osd_obj_id *obj, osd_id initial_id, struct osd_obj_id_list *list, unsigned nelem) @@ -464,6 +475,11 @@ EXPORT_SYMBOL(osd_req_flush_partition); /* * Collection commands */ +/*TODO: void osd_req_create_collection(struct osd_request *, + const struct osd_obj_id *); */ +/*TODO: void osd_req_remove_collection(struct osd_request *, + const struct osd_obj_id *); */ + int osd_req_list_collection_objects(struct osd_request *or, const struct osd_obj_id *obj, osd_id initial_id, struct osd_obj_id_list *list, unsigned nelem) @@ -473,6 +489,8 @@ int osd_req_list_collection_objects(struct osd_request *or, } EXPORT_SYMBOL(osd_req_list_collection_objects); +/*TODO: void query(struct osd_request *, ...); V2 */ + void osd_req_flush_collection(struct osd_request *or, const struct osd_obj_id *obj, enum osd_options_flush_scope_values op) { @@ -481,6 +499,9 @@ void osd_req_flush_collection(struct osd_request *or, } EXPORT_SYMBOL(osd_req_flush_collection); +/*TODO: void get_member_attrs(struct osd_request *, ...); V2 */ +/*TODO: void set_member_attrs(struct osd_request *, ...); V2 */ + /* * Object commands */ @@ -496,6 +517,11 @@ void osd_req_remove_object(struct osd_request *or, struct osd_obj_id *obj) } EXPORT_SYMBOL(osd_req_remove_object); + +/*TODO: void osd_req_create_multi(struct osd_request *or, + struct osd_obj_id *first, struct osd_obj_id_list *list, unsigned nelem); +*/ + void osd_req_write(struct osd_request *or, const struct osd_obj_id *obj, struct bio *bio, u64 offset) { @@ -507,6 +533,15 @@ void osd_req_write(struct osd_request *or, } EXPORT_SYMBOL(osd_req_write); +/*TODO: void osd_req_append(struct osd_request *, + const struct osd_obj_id *, struct bio *data_out); */ +/*TODO: void osd_req_create_write(struct osd_request *, + const struct osd_obj_id *, struct bio *data_out, u64 offset); */ +/*TODO: void osd_req_clear(struct osd_request *, + const struct osd_obj_id *, u64 offset, u64 len); */ +/*TODO: void osd_req_punch(struct osd_request *, + const struct osd_obj_id *, u64 offset, u64 len); V2 */ + void osd_req_flush_object(struct osd_request *or, const struct osd_obj_id *obj, enum osd_options_flush_scope_values op, /*V2*/ u64 offset, /*V2*/ u64 len) -- cgit v0.10.2 From c6572c983726fe3f3bb5f07e9afe3a9b8e402d1b Mon Sep 17 00:00:00 2001 From: Boaz Harrosh Date: Sun, 25 Jan 2009 17:09:40 +0200 Subject: [SCSI] libosd: OSD version 2 Support Add support for OSD2 at run time. It is now possible to run with both OSDv1 and OSDv2 targets at the same time. The actual detection should be preformed by the security manager, as the version is encoded in the capability structure. Signed-off-by: Boaz Harrosh Reviewed-by: Benny Halevy Signed-off-by: James Bottomley diff --git a/drivers/scsi/osd/osd_initiator.c b/drivers/scsi/osd/osd_initiator.c index 3fd021a..86a76cc 100644 --- a/drivers/scsi/osd/osd_initiator.c +++ b/drivers/scsi/osd/osd_initiator.c @@ -59,36 +59,50 @@ static inline void build_test(void) { /* structures were not packed */ BUILD_BUG_ON(sizeof(struct osd_capability) != OSD_CAP_LEN); + BUILD_BUG_ON(sizeof(struct osdv2_cdb) != OSD_TOTAL_CDB_LEN); BUILD_BUG_ON(sizeof(struct osdv1_cdb) != OSDv1_TOTAL_CDB_LEN); } static unsigned _osd_req_cdb_len(struct osd_request *or) { - return OSDv1_TOTAL_CDB_LEN; + return osd_req_is_ver1(or) ? OSDv1_TOTAL_CDB_LEN : OSD_TOTAL_CDB_LEN; } static unsigned _osd_req_alist_elem_size(struct osd_request *or, unsigned len) { - return osdv1_attr_list_elem_size(len); + return osd_req_is_ver1(or) ? + osdv1_attr_list_elem_size(len) : + osdv2_attr_list_elem_size(len); } static unsigned _osd_req_alist_size(struct osd_request *or, void *list_head) { - return osdv1_list_size(list_head); + return osd_req_is_ver1(or) ? + osdv1_list_size(list_head) : + osdv2_list_size(list_head); } static unsigned _osd_req_sizeof_alist_header(struct osd_request *or) { - return sizeof(struct osdv1_attributes_list_header); + return osd_req_is_ver1(or) ? + sizeof(struct osdv1_attributes_list_header) : + sizeof(struct osdv2_attributes_list_header); } static void _osd_req_set_alist_type(struct osd_request *or, void *list, int list_type) { - struct osdv1_attributes_list_header *attr_list = list; + if (osd_req_is_ver1(or)) { + struct osdv1_attributes_list_header *attr_list = list; + + memset(attr_list, 0, sizeof(*attr_list)); + attr_list->type = list_type; + } else { + struct osdv2_attributes_list_header *attr_list = list; - memset(attr_list, 0, sizeof(*attr_list)); - attr_list->type = list_type; + memset(attr_list, 0, sizeof(*attr_list)); + attr_list->type = list_type; + } } static bool _osd_req_is_alist_type(struct osd_request *or, @@ -97,10 +111,14 @@ static bool _osd_req_is_alist_type(struct osd_request *or, if (!list) return false; - if (1) { + if (osd_req_is_ver1(or)) { struct osdv1_attributes_list_header *attr_list = list; return attr_list->type == list_type; + } else { + struct osdv2_attributes_list_header *attr_list = list; + + return attr_list->type == list_type; } } @@ -110,15 +128,22 @@ static void _osd_req_encode_olist(struct osd_request *or, { struct osd_cdb_head *cdbh = osd_cdb_head(&or->cdb); - cdbh->v1.list_identifier = list->list_identifier; - cdbh->v1.start_address = list->continuation_id; + if (osd_req_is_ver1(or)) { + cdbh->v1.list_identifier = list->list_identifier; + cdbh->v1.start_address = list->continuation_id; + } else { + cdbh->v2.list_identifier = list->list_identifier; + cdbh->v2.start_address = list->continuation_id; + } } static osd_cdb_offset osd_req_encode_offset(struct osd_request *or, u64 offset, unsigned *padding) { return __osd_encode_offset(offset, padding, - OSDv1_OFFSET_MIN_SHIFT, OSD_OFFSET_MAX_SHIFT); + osd_req_is_ver1(or) ? + OSDv1_OFFSET_MIN_SHIFT : OSD_OFFSET_MIN_SHIFT, + OSD_OFFSET_MAX_SHIFT); } static struct osd_security_parameters * @@ -126,7 +151,10 @@ _osd_req_sec_params(struct osd_request *or) { struct osd_cdb *ocdb = &or->cdb; - return &ocdb->v1.sec_params; + if (osd_req_is_ver1(or)) + return &ocdb->v1.sec_params; + else + return &ocdb->v2.sec_params; } void osd_dev_init(struct osd_dev *osdd, struct scsi_device *scsi_device) @@ -134,6 +162,9 @@ void osd_dev_init(struct osd_dev *osdd, struct scsi_device *scsi_device) memset(osdd, 0, sizeof(*osdd)); osdd->scsi_device = scsi_device; osdd->def_timeout = BLK_DEFAULT_SG_TIMEOUT; +#ifdef OSD_VER1_SUPPORT + osdd->version = OSD_VER2; +#endif /* TODO: Allocate pools for osd_request attributes ... */ } EXPORT_SYMBOL(osd_dev_init); @@ -334,10 +365,30 @@ static void _osdv1_req_encode_common(struct osd_request *or, ocdb->h.v1.start_address = cpu_to_be64(offset); } +static void _osdv2_req_encode_common(struct osd_request *or, + __be16 act, const struct osd_obj_id *obj, u64 offset, u64 len) +{ + struct osdv2_cdb *ocdb = &or->cdb.v2; + + OSD_DEBUG("OSDv2 execute opcode 0x%x\n", be16_to_cpu(act)); + + ocdb->h.varlen_cdb.opcode = VARIABLE_LENGTH_CMD; + ocdb->h.varlen_cdb.additional_cdb_length = OSD_ADDITIONAL_CDB_LENGTH; + ocdb->h.varlen_cdb.service_action = act; + + ocdb->h.partition = cpu_to_be64(obj->partition); + ocdb->h.object = cpu_to_be64(obj->id); + ocdb->h.v2.length = cpu_to_be64(len); + ocdb->h.v2.start_address = cpu_to_be64(offset); +} + static void _osd_req_encode_common(struct osd_request *or, __be16 act, const struct osd_obj_id *obj, u64 offset, u64 len) { - _osdv1_req_encode_common(or, act, obj, offset, len); + if (osd_req_is_ver1(or)) + _osdv1_req_encode_common(or, act, obj, offset, len); + else + _osdv2_req_encode_common(or, act, obj, offset, len); } /* @@ -546,6 +597,12 @@ void osd_req_flush_object(struct osd_request *or, const struct osd_obj_id *obj, enum osd_options_flush_scope_values op, /*V2*/ u64 offset, /*V2*/ u64 len) { + if (unlikely(osd_req_is_ver1(or) && (offset || len))) { + OSD_DEBUG("OSD Ver1 flush on specific range ignored\n"); + offset = 0; + len = 0; + } + _osd_req_encode_common(or, OSD_ACT_FLUSH, obj, offset, len); _osd_req_encode_flush(or, op); } @@ -1169,6 +1226,10 @@ enum { OSD_SEC_CAP_V1_ALL_CAPS = OSD_SEC_CAP_GLOBAL | OSD_SEC_CAP_DEV_MGMT }; +enum { OSD_SEC_CAP_V2_ALL_CAPS = + OSD_SEC_CAP_V1_ALL_CAPS | OSD_SEC_CAP_QUERY | OSD_SEC_CAP_M_OBJECT +}; + void osd_sec_init_nosec_doall_caps(void *caps, const struct osd_obj_id *obj, bool is_collection, const bool is_v1) { @@ -1210,9 +1271,14 @@ void osd_sec_init_nosec_doall_caps(void *caps, } EXPORT_SYMBOL(osd_sec_init_nosec_doall_caps); +/* FIXME: Extract version from caps pointer. + * Also Pete's target only supports caps from OSDv1 for now + */ void osd_set_caps(struct osd_cdb *cdb, const void *caps) { - memcpy(&cdb->v1.caps, caps, OSDv1_CAP_LEN); + bool is_ver1 = true; + /* NOTE: They start at same address */ + memcpy(&cdb->v1.caps, caps, is_ver1 ? OSDv1_CAP_LEN : OSD_CAP_LEN); } bool osd_is_sec_alldata(struct osd_security_parameters *sec_parms __unused) diff --git a/include/scsi/osd_initiator.h b/include/scsi/osd_initiator.h index e84dc7a..8482777 100644 --- a/include/scsi/osd_initiator.h +++ b/include/scsi/osd_initiator.h @@ -21,6 +21,23 @@ /* Note: "NI" in comments below means "Not Implemented yet" */ +/* Configure of code: + * #undef if you *don't* want OSD v1 support in runtime. + * If #defined the initiator will dynamically configure to encode OSD v1 + * CDB's if the target is detected to be OSD v1 only. + * OSD v2 only commands, options, and attributes will be ignored if target + * is v1 only. + * If #defined will result in bigger/slower code (OK Slower maybe not) + * Q: Should this be CONFIG_SCSI_OSD_VER1_SUPPORT and set from Kconfig? + */ +#define OSD_VER1_SUPPORT y + +enum osd_std_version { + OSD_VER_NONE = 0, + OSD_VER1 = 1, + OSD_VER2 = 2, +}; + /* * Object-based Storage Device. * This object represents an OSD device. @@ -31,6 +48,10 @@ struct osd_dev { struct scsi_device *scsi_device; unsigned def_timeout; + +#ifdef OSD_VER1_SUPPORT + enum osd_std_version version; +#endif }; /* Retrieve/return osd_dev(s) for use by Kernel clients */ @@ -46,6 +67,14 @@ void osduld_unregister_test(unsigned ioctl); void osd_dev_init(struct osd_dev *od, struct scsi_device *scsi_device); void osd_dev_fini(struct osd_dev *od); +/* we might want to use function vector in the future */ +static inline void osd_dev_set_ver(struct osd_dev *od, enum osd_std_version v) +{ +#ifdef OSD_VER1_SUPPORT + od->version = v; +#endif +} + struct osd_request; typedef void (osd_req_done_fn)(struct osd_request *or, void *private); @@ -82,6 +111,16 @@ struct osd_request { int async_error; }; +/* OSD Version control */ +static inline bool osd_req_is_ver1(struct osd_request *or) +{ +#ifdef OSD_VER1_SUPPORT + return or->osd_dev->version == OSD_VER1; +#else + return false; +#endif +} + /* * How to use the osd library: * diff --git a/include/scsi/osd_protocol.h b/include/scsi/osd_protocol.h index ce1a877..cd3cbf7 100644 --- a/include/scsi/osd_protocol.h +++ b/include/scsi/osd_protocol.h @@ -25,12 +25,16 @@ enum { OSDv1_TOTAL_CDB_LEN = OSDv1_ADDITIONAL_CDB_LENGTH + 8, OSDv1_CAP_LEN = 80, /* Latest supported version */ - OSD_ADDITIONAL_CDB_LENGTH = OSDv1_ADDITIONAL_CDB_LENGTH, - OSD_TOTAL_CDB_LEN = OSDv1_TOTAL_CDB_LEN, - OSD_CAP_LEN = OSDv1_CAP_LEN, +/* OSD_ADDITIONAL_CDB_LENGTH = 216,*/ + OSD_ADDITIONAL_CDB_LENGTH = + OSDv1_ADDITIONAL_CDB_LENGTH, /* FIXME: Pete rev-001 sup */ + OSD_TOTAL_CDB_LEN = OSD_ADDITIONAL_CDB_LENGTH + 8, +/* OSD_CAP_LEN = 104,*/ + OSD_CAP_LEN = OSDv1_CAP_LEN,/* FIXME: Pete rev-001 sup */ OSD_SYSTEMID_LEN = 20, OSD_CRYPTO_KEYID_SIZE = 20, + /*FIXME: OSDv2_CRYPTO_KEYID_SIZE = 32,*/ OSD_CRYPTO_SEED_SIZE = 4, OSD_CRYPTO_NONCE_SIZE = 12, OSD_MAX_SENSE_LEN = 252, /* from SPC-3 */ @@ -108,6 +112,7 @@ enum { OSD_OFFSET_MAX_BITS = 28, OSDv1_OFFSET_MIN_SHIFT = 8, + OSD_OFFSET_MIN_SHIFT = 3, OSD_OFFSET_MAX_SHIFT = 16, }; @@ -129,6 +134,16 @@ static inline osd_cdb_offset osd_encode_offset_v1(u64 offset, unsigned *padding) OSDv1_OFFSET_MIN_SHIFT, OSD_OFFSET_MAX_SHIFT); } +/* Minimum 8 bytes alignment + * Same as v1 but since exponent can be signed than a less than + * 256 alignment can be reached with small offsets (<2GB) + */ +static inline osd_cdb_offset osd_encode_offset_v2(u64 offset, unsigned *padding) +{ + return __osd_encode_offset(offset, padding, + OSD_OFFSET_MIN_SHIFT, OSD_OFFSET_MAX_SHIFT); +} + /* osd2r03: 5.2.1 Overview */ struct osd_cdb_head { struct scsi_varlen_cdb_hdr varlen_cdb; @@ -144,6 +159,13 @@ struct osd_cdb_head { /*36*/ __be64 length; /*44*/ __be64 start_address; } __packed v1; + + struct __osdv2_cdb_addr_len { + /* called allocation_length in some commands */ +/*32*/ __be64 length; +/*40*/ __be64 start_address; +/*48*/ __be32 list_identifier;/* Rarely used */ + } __packed v2; }; /*52*/ union { /* selected attributes mode Page/List/Single */ struct osd_attributes_page_mode { @@ -182,6 +204,7 @@ struct osd_cdb_head { /*80*/ /*160 v1*/ +/*184 v2*/ struct osd_security_parameters { /*160*/u8 integrity_check_value[OSD_CRYPTO_KEYID_SIZE]; /*180*/u8 request_nonce[OSD_CRYPTO_NONCE_SIZE]; @@ -189,6 +212,9 @@ struct osd_security_parameters { /*196*/osd_cdb_offset data_out_integrity_check_offset; } __packed; /*200 v1*/ +/*224 v2*/ + +/* FIXME: osdv2_security_parameters */ struct osdv1_cdb { struct osd_cdb_head h; @@ -196,9 +222,17 @@ struct osdv1_cdb { struct osd_security_parameters sec_params; } __packed; +struct osdv2_cdb { + struct osd_cdb_head h; + u8 caps[OSD_CAP_LEN]; + struct osd_security_parameters sec_params; + /* FIXME: osdv2_security_parameters */ +} __packed; + struct osd_cdb { union { struct osdv1_cdb v1; + struct osdv2_cdb v2; u8 buff[OSD_TOTAL_CDB_LEN]; }; } __packed; @@ -269,6 +303,7 @@ struct osd_attributes_list_attrid { /* * osd2r03: 7.1.3.3 List entry format for retrieved attributes and * for setting attributes + * NOTE: v2 is 8-bytes aligned, v1 is not aligned. */ struct osd_attributes_list_element { __be32 attr_page; @@ -279,6 +314,7 @@ struct osd_attributes_list_element { enum { OSDv1_ATTRIBUTES_ELEM_ALIGN = 1, + OSD_ATTRIBUTES_ELEM_ALIGN = 8, }; enum { @@ -292,6 +328,12 @@ static inline unsigned osdv1_attr_list_elem_size(unsigned len) OSDv1_ATTRIBUTES_ELEM_ALIGN); } +static inline unsigned osdv2_attr_list_elem_size(unsigned len) +{ + return ALIGN(len + sizeof(struct osd_attributes_list_element), + OSD_ATTRIBUTES_ELEM_ALIGN); +} + /* * osd2r03: 7.1.3 OSD attributes lists (Table 184) — List type values */ @@ -326,6 +368,21 @@ static inline unsigned osdv1_list_size(struct osdv1_attributes_list_header *h) return be16_to_cpu(h->list_bytes); } +struct osdv2_attributes_list_header { + u8 type; /* lower 4-bits only */ + u8 pad[3]; +/*4*/ __be32 list_bytes; /* Initiator shall set to zero. Only set by target */ + /* + * type=9 followed by struct osd_attributes_list_element's + * type=E followed by struct osd_attributes_list_multi_header's + */ +} __packed; + +static inline unsigned osdv2_list_size(struct osdv2_attributes_list_header *h) +{ + return be32_to_cpu(h->list_bytes); +} + /* (osd-r10 6.13) * osd2r03: 6.15 LIST (Table 79) LIST command parameter data. * for root_lstchg below @@ -469,11 +526,36 @@ struct osdv1_cap_object_descriptor { } __packed; /*80 v1*/ -struct osd_capability { +/*56 v2*/ +struct osd_cap_object_descriptor { + union { + struct { +/*56*/ __be32 allowed_attributes_access; +/*60*/ __be32 policy_access_tag; +/*64*/ __be16 boot_epoch; +/*66*/ u8 reserved[6]; +/*72*/ __be64 allowed_partition_id; +/*80*/ __be64 allowed_object_id; +/*88*/ __be64 allowed_range_length; +/*96*/ __be64 allowed_range_start; + } __packed obj_desc; + +/*56*/ u8 object_descriptor[48]; + }; +} __packed; +/*104 v2*/ + +struct osdv1_capability { struct osd_capability_head h; struct osdv1_cap_object_descriptor od; } __packed; +struct osd_capability { + struct osd_capability_head h; +/* struct osd_cap_object_descriptor od;*/ + struct osdv1_cap_object_descriptor od; /* FIXME: Pete rev-001 sup */ +} __packed; + /** * osd_sec_set_caps - set cap-bits into the capabilities header * -- cgit v0.10.2 From 1b9dce94c8a24a3f1a01fcdf688f2d903b32acdf Mon Sep 17 00:00:00 2001 From: Boaz Harrosh Date: Sun, 25 Jan 2009 17:13:38 +0200 Subject: [SCSI] libosd: OSDv2 auto detection Auto detect an OSDv2 or OSDv1 target at run time. Note how none of the OSD API calls change. The tests do not know what device version it is. This test now passes against both the IBM-OSD-SIM OSD1 target as well as OSC's OSD2 target. Signed-off-by: Boaz Harrosh Reviewed-by: Benny Halevy Signed-off-by: James Bottomley diff --git a/drivers/scsi/osd/osd_initiator.c b/drivers/scsi/osd/osd_initiator.c index 86a76cc..f6340c2 100644 --- a/drivers/scsi/osd/osd_initiator.c +++ b/drivers/scsi/osd/osd_initiator.c @@ -41,6 +41,7 @@ #include #include +#include #include #include "osd_debug.h" @@ -63,6 +64,130 @@ static inline void build_test(void) BUILD_BUG_ON(sizeof(struct osdv1_cdb) != OSDv1_TOTAL_CDB_LEN); } +static const char *_osd_ver_desc(struct osd_request *or) +{ + return osd_req_is_ver1(or) ? "OSD1" : "OSD2"; +} + +#define ATTR_DEF_RI(id, len) ATTR_DEF(OSD_APAGE_ROOT_INFORMATION, id, len) + +static int _osd_print_system_info(struct osd_dev *od, void *caps) +{ + struct osd_request *or; + struct osd_attr get_attrs[] = { + ATTR_DEF_RI(OSD_ATTR_RI_VENDOR_IDENTIFICATION, 8), + ATTR_DEF_RI(OSD_ATTR_RI_PRODUCT_IDENTIFICATION, 16), + ATTR_DEF_RI(OSD_ATTR_RI_PRODUCT_MODEL, 32), + ATTR_DEF_RI(OSD_ATTR_RI_PRODUCT_REVISION_LEVEL, 4), + ATTR_DEF_RI(OSD_ATTR_RI_PRODUCT_SERIAL_NUMBER, 64 /*variable*/), + ATTR_DEF_RI(OSD_ATTR_RI_OSD_NAME, 64 /*variable*/), + ATTR_DEF_RI(OSD_ATTR_RI_TOTAL_CAPACITY, 8), + ATTR_DEF_RI(OSD_ATTR_RI_USED_CAPACITY, 8), + ATTR_DEF_RI(OSD_ATTR_RI_NUMBER_OF_PARTITIONS, 8), + ATTR_DEF_RI(OSD_ATTR_RI_CLOCK, 6), + /* IBM-OSD-SIM Has a bug with this one put it last */ + ATTR_DEF_RI(OSD_ATTR_RI_OSD_SYSTEM_ID, 20), + }; + void *iter = NULL, *pFirst; + int nelem = ARRAY_SIZE(get_attrs), a = 0; + int ret; + + or = osd_start_request(od, GFP_KERNEL); + if (!or) + return -ENOMEM; + + /* get attrs */ + osd_req_get_attributes(or, &osd_root_object); + osd_req_add_get_attr_list(or, get_attrs, ARRAY_SIZE(get_attrs)); + + ret = osd_finalize_request(or, 0, caps, NULL); + if (ret) + goto out; + + ret = osd_execute_request(or); + if (ret) { + OSD_ERR("Failed to detect %s => %d\n", _osd_ver_desc(or), ret); + goto out; + } + + osd_req_decode_get_attr_list(or, get_attrs, &nelem, &iter); + + OSD_INFO("Detected %s device\n", + _osd_ver_desc(or)); + + pFirst = get_attrs[a++].val_ptr; + OSD_INFO("OSD_ATTR_RI_VENDOR_IDENTIFICATION [%s]\n", + (char *)pFirst); + + pFirst = get_attrs[a++].val_ptr; + OSD_INFO("OSD_ATTR_RI_PRODUCT_IDENTIFICATION [%s]\n", + (char *)pFirst); + + pFirst = get_attrs[a++].val_ptr; + OSD_INFO("OSD_ATTR_RI_PRODUCT_MODEL [%s]\n", + (char *)pFirst); + + pFirst = get_attrs[a++].val_ptr; + OSD_INFO("OSD_ATTR_RI_PRODUCT_REVISION_LEVEL [%u]\n", + get_unaligned_be32(pFirst)); + + pFirst = get_attrs[a++].val_ptr; + OSD_INFO("OSD_ATTR_RI_PRODUCT_SERIAL_NUMBER [%s]\n", + (char *)pFirst); + + pFirst = get_attrs[a].val_ptr; + OSD_INFO("OSD_ATTR_RI_OSD_NAME [%s]\n", (char *)pFirst); + a++; + + pFirst = get_attrs[a++].val_ptr; + OSD_INFO("OSD_ATTR_RI_TOTAL_CAPACITY [0x%llx]\n", + _LLU(get_unaligned_be64(pFirst))); + + pFirst = get_attrs[a++].val_ptr; + OSD_INFO("OSD_ATTR_RI_USED_CAPACITY [0x%llx]\n", + _LLU(get_unaligned_be64(pFirst))); + + pFirst = get_attrs[a++].val_ptr; + OSD_INFO("OSD_ATTR_RI_NUMBER_OF_PARTITIONS [%llu]\n", + _LLU(get_unaligned_be64(pFirst))); + + /* FIXME: Where are the time utilities */ + pFirst = get_attrs[a++].val_ptr; + OSD_INFO("OSD_ATTR_RI_CLOCK [0x%02x%02x%02x%02x%02x%02x]\n", + ((char *)pFirst)[0], ((char *)pFirst)[1], + ((char *)pFirst)[2], ((char *)pFirst)[3], + ((char *)pFirst)[4], ((char *)pFirst)[5]); + + if (a < nelem) { /* IBM-OSD-SIM bug, Might not have it */ + unsigned len = get_attrs[a].len; + char sid_dump[32*4 + 2]; /* 2nibbles+space+ASCII */ + + hex_dump_to_buffer(get_attrs[a].val_ptr, len, 32, 1, + sid_dump, sizeof(sid_dump), true); + OSD_INFO("OSD_ATTR_RI_OSD_SYSTEM_ID(%d) [%s]\n", len, sid_dump); + a++; + } +out: + osd_end_request(or); + return ret; +} + +int osd_auto_detect_ver(struct osd_dev *od, void *caps) +{ + int ret; + + /* Auto-detect the osd version */ + ret = _osd_print_system_info(od, caps); + if (ret) { + osd_dev_set_ver(od, OSD_VER1); + OSD_DEBUG("converting to OSD1\n"); + ret = _osd_print_system_info(od, caps); + } + + return ret; +} +EXPORT_SYMBOL(osd_auto_detect_ver); + static unsigned _osd_req_cdb_len(struct osd_request *or) { return osd_req_is_ver1(or) ? OSDv1_TOTAL_CDB_LEN : OSD_TOTAL_CDB_LEN; diff --git a/drivers/scsi/osd/osd_uld.c b/drivers/scsi/osd/osd_uld.c index cd4ca7c..f8b1a74 100644 --- a/drivers/scsi/osd/osd_uld.c +++ b/drivers/scsi/osd/osd_uld.c @@ -243,6 +243,7 @@ EXPORT_SYMBOL(osduld_put_device); static int __detect_osd(struct osd_uld_device *oud) { struct scsi_device *scsi_device = oud->od.scsi_device; + char caps[OSD_CAP_LEN]; int error; /* sending a test_unit_ready as first command seems to be needed @@ -254,6 +255,10 @@ static int __detect_osd(struct osd_uld_device *oud) if (error) OSD_ERR("warning: scsi_test_unit_ready failed\n"); + osd_sec_init_nosec_doall_caps(caps, &osd_root_object, false, true); + if (osd_auto_detect_ver(&oud->od, caps)) + return -ENODEV; + return 0; } diff --git a/include/scsi/osd_initiator.h b/include/scsi/osd_initiator.h index 8482777..24edeae 100644 --- a/include/scsi/osd_initiator.h +++ b/include/scsi/osd_initiator.h @@ -67,6 +67,9 @@ void osduld_unregister_test(unsigned ioctl); void osd_dev_init(struct osd_dev *od, struct scsi_device *scsi_device); void osd_dev_fini(struct osd_dev *od); +/* some hi level device operations */ +int osd_auto_detect_ver(struct osd_dev *od, void *caps); /* GFP_KERNEL */ + /* we might want to use function vector in the future */ static inline void osd_dev_set_ver(struct osd_dev *od, enum osd_std_version v) { -- cgit v0.10.2 From 98f3aea2bd4b4f9cd7a6a6479ed9410787f756fd Mon Sep 17 00:00:00 2001 From: Boaz Harrosh Date: Sun, 25 Jan 2009 17:15:16 +0200 Subject: [SCSI] libosd: SCSI/OSD Sense decoding support Implementation of the osd_req_decode_sense() API. Can be called by library users to decode what failed in command executions. Add SCSI_OSD_DPRINT_SENSE Kconfig variable. Possible values are: 0 - Do not print any errors to messages file 1 - (Default) Print only decoded errors that are not recoverable. Recoverable errors are those that the target has complied with the request but with a warning. For example read passed end of object will return zeros after the last valid byte. 2- Print all errors. Signed-off-by: Boaz Harrosh Signed-off-by: James Bottomley diff --git a/drivers/scsi/osd/Kbuild b/drivers/scsi/osd/Kbuild index 9d38248..0e207aa 100644 --- a/drivers/scsi/osd/Kbuild +++ b/drivers/scsi/osd/Kbuild @@ -20,6 +20,12 @@ ccflags-y += -DCONFIG_SCSI_OSD_INITIATOR -DCONFIG_SCSI_OSD_INITIATOR_MODULE CONFIG_SCSI_OSD_ULD=m ccflags-y += -DCONFIG_SCSI_OSD_ULD -DCONFIG_SCSI_OSD_ULD_MODULE +# CONFIG_SCSI_OSD_DPRINT_SENSE = +# 0 - no print of errors +# 1 - print errors +# 2 - errors + warrnings +ccflags-y += -DCONFIG_SCSI_OSD_DPRINT_SENSE=1 + # Uncomment to turn debug on # ccflags-y += -DCONFIG_SCSI_OSD_DEBUG diff --git a/drivers/scsi/osd/osd_initiator.c b/drivers/scsi/osd/osd_initiator.c index f6340c2..0bbbf27 100644 --- a/drivers/scsi/osd/osd_initiator.c +++ b/drivers/scsi/osd/osd_initiator.c @@ -42,6 +42,8 @@ #include #include #include +#include + #include #include "osd_debug.h" @@ -1339,6 +1341,195 @@ int osd_finalize_request(struct osd_request *or, } EXPORT_SYMBOL(osd_finalize_request); +#define OSD_SENSE_PRINT1(fmt, a...) \ + do { \ + if (__cur_sense_need_output) \ + OSD_ERR(fmt, ##a); \ + } while (0) + +#define OSD_SENSE_PRINT2(fmt, a...) OSD_SENSE_PRINT1(" " fmt, ##a) + +int osd_req_decode_sense_full(struct osd_request *or, + struct osd_sense_info *osi, bool silent, + struct osd_obj_id *bad_obj_list __unused, int max_obj __unused, + struct osd_attr *bad_attr_list, int max_attr) +{ + int sense_len, original_sense_len; + struct osd_sense_info local_osi; + struct scsi_sense_descriptor_based *ssdb; + void *cur_descriptor; +#if (CONFIG_SCSI_OSD_DPRINT_SENSE == 0) + const bool __cur_sense_need_output = false; +#else + bool __cur_sense_need_output = !silent; +#endif + + if (!or->request->errors) + return 0; + + ssdb = or->request->sense; + sense_len = or->request->sense_len; + if ((sense_len < (int)sizeof(*ssdb) || !ssdb->sense_key)) { + OSD_ERR("Block-layer returned error(0x%x) but " + "sense_len(%u) || key(%d) is empty\n", + or->request->errors, sense_len, ssdb->sense_key); + return -EIO; + } + + if ((ssdb->response_code != 0x72) && (ssdb->response_code != 0x73)) { + OSD_ERR("Unrecognized scsi sense: rcode=%x length=%d\n", + ssdb->response_code, sense_len); + return -EIO; + } + + osi = osi ? : &local_osi; + memset(osi, 0, sizeof(*osi)); + osi->key = ssdb->sense_key; + osi->additional_code = be16_to_cpu(ssdb->additional_sense_code); + original_sense_len = ssdb->additional_sense_length + 8; + +#if (CONFIG_SCSI_OSD_DPRINT_SENSE == 1) + if (__cur_sense_need_output) + __cur_sense_need_output = (osi->key > scsi_sk_recovered_error); +#endif + OSD_SENSE_PRINT1("Main Sense information key=0x%x length(%d, %d) " + "additional_code=0x%x\n", + osi->key, original_sense_len, sense_len, + osi->additional_code); + + if (original_sense_len < sense_len) + sense_len = original_sense_len; + + cur_descriptor = ssdb->ssd; + sense_len -= sizeof(*ssdb); + while (sense_len > 0) { + struct scsi_sense_descriptor *ssd = cur_descriptor; + int cur_len = ssd->additional_length + 2; + + sense_len -= cur_len; + + if (sense_len < 0) + break; /* sense was truncated */ + + switch (ssd->descriptor_type) { + case scsi_sense_information: + case scsi_sense_command_specific_information: + { + struct scsi_sense_command_specific_data_descriptor + *sscd = cur_descriptor; + + osi->command_info = + get_unaligned_be64(&sscd->information) ; + OSD_SENSE_PRINT2( + "command_specific_information 0x%llx \n", + _LLU(osi->command_info)); + break; + } + case scsi_sense_key_specific: + { + struct scsi_sense_key_specific_data_descriptor + *ssks = cur_descriptor; + + osi->sense_info = get_unaligned_be16(&ssks->value); + OSD_SENSE_PRINT2( + "sense_key_specific_information %u" + "sksv_cd_bpv_bp (0x%x)\n", + osi->sense_info, ssks->sksv_cd_bpv_bp); + break; + } + case osd_sense_object_identification: + { /*FIXME: Keep first not last, Store in array*/ + struct osd_sense_identification_data_descriptor + *osidd = cur_descriptor; + + osi->not_initiated_command_functions = + le32_to_cpu(osidd->not_initiated_functions); + osi->completed_command_functions = + le32_to_cpu(osidd->completed_functions); + osi->obj.partition = be64_to_cpu(osidd->partition_id); + osi->obj.id = be64_to_cpu(osidd->object_id); + OSD_SENSE_PRINT2( + "object_identification pid=0x%llx oid=0x%llx\n", + _LLU(osi->obj.partition), _LLU(osi->obj.id)); + OSD_SENSE_PRINT2( + "not_initiated_bits(%x) " + "completed_command_bits(%x)\n", + osi->not_initiated_command_functions, + osi->completed_command_functions); + break; + } + case osd_sense_response_integrity_check: + { + struct osd_sense_response_integrity_check_descriptor + *osricd = cur_descriptor; + const unsigned len = + sizeof(osricd->integrity_check_value); + char key_dump[len*4 + 2]; /* 2nibbles+space+ASCII */ + + hex_dump_to_buffer(osricd->integrity_check_value, len, + 32, 1, key_dump, sizeof(key_dump), true); + OSD_SENSE_PRINT2("response_integrity [%s]\n", key_dump); + } + case osd_sense_attribute_identification: + { + struct osd_sense_attributes_data_descriptor + *osadd = cur_descriptor; + int len = min(cur_len, sense_len); + int i = 0; + struct osd_sense_attr *pattr = osadd->sense_attrs; + + while (len < 0) { + u32 attr_page = be32_to_cpu(pattr->attr_page); + u32 attr_id = be32_to_cpu(pattr->attr_id); + + if (i++ == 0) { + osi->attr.attr_page = attr_page; + osi->attr.attr_id = attr_id; + } + + if (bad_attr_list && max_attr) { + bad_attr_list->attr_page = attr_page; + bad_attr_list->attr_id = attr_id; + bad_attr_list++; + max_attr--; + } + OSD_SENSE_PRINT2( + "osd_sense_attribute_identification" + "attr_page=0x%x attr_id=0x%x\n", + attr_page, attr_id); + } + } + /*These are not legal for OSD*/ + case scsi_sense_field_replaceable_unit: + OSD_SENSE_PRINT2("scsi_sense_field_replaceable_unit\n"); + break; + case scsi_sense_stream_commands: + OSD_SENSE_PRINT2("scsi_sense_stream_commands\n"); + break; + case scsi_sense_block_commands: + OSD_SENSE_PRINT2("scsi_sense_block_commands\n"); + break; + case scsi_sense_ata_return: + OSD_SENSE_PRINT2("scsi_sense_ata_return\n"); + break; + default: + if (ssd->descriptor_type <= scsi_sense_Reserved_last) + OSD_SENSE_PRINT2( + "scsi_sense Reserved descriptor (0x%x)", + ssd->descriptor_type); + else + OSD_SENSE_PRINT2( + "scsi_sense Vendor descriptor (0x%x)", + ssd->descriptor_type); + } + + cur_descriptor += cur_len; + } + + return (osi->key > scsi_sk_recovered_error) ? -EIO : 0; +} +EXPORT_SYMBOL(osd_req_decode_sense_full); + /* * Implementation of osd_sec.h API * TODO: Move to a separate osd_sec.c file at a later stage. diff --git a/include/scsi/osd_initiator.h b/include/scsi/osd_initiator.h index 24edeae..b24d961 100644 --- a/include/scsi/osd_initiator.h +++ b/include/scsi/osd_initiator.h @@ -217,6 +217,55 @@ int osd_execute_request_async(struct osd_request *or, osd_req_done_fn *done, void *private); /** + * osd_req_decode_sense_full - Decode sense information after execution. + * + * @or: - osd_request to examine + * @osi - Recievs a more detailed error report information (optional). + * @silent - Do not print to dmsg (Even if enabled) + * @bad_obj_list - Some commands act on multiple objects. Failed objects will + * be recieved here (optional) + * @max_obj - Size of @bad_obj_list. + * @bad_attr_list - List of failing attributes (optional) + * @max_attr - Size of @bad_attr_list. + * + * After execution, sense + return code can be analyzed using this function. The + * return code is the final disposition on the error. So it is possible that a + * CHECK_CONDITION was returned from target but this will return NO_ERROR, for + * example on recovered errors. All parameters are optional if caller does + * not need any returned information. + * Note: This function will also dump the error to dmsg according to settings + * of the SCSI_OSD_DPRINT_SENSE Kconfig value. Set @silent if you know the + * command would routinely fail, to not spam the dmsg file. + */ +struct osd_sense_info { + int key; /* one of enum scsi_sense_keys */ + int additional_code ; /* enum osd_additional_sense_codes */ + union { /* Sense specific information */ + u16 sense_info; + u16 cdb_field_offset; /* scsi_invalid_field_in_cdb */ + }; + union { /* Command specific information */ + u64 command_info; + }; + + u32 not_initiated_command_functions; /* osd_command_functions_bits */ + u32 completed_command_functions; /* osd_command_functions_bits */ + struct osd_obj_id obj; + struct osd_attr attr; +}; + +int osd_req_decode_sense_full(struct osd_request *or, + struct osd_sense_info *osi, bool silent, + struct osd_obj_id *bad_obj_list, int max_obj, + struct osd_attr *bad_attr_list, int max_attr); + +static inline int osd_req_decode_sense(struct osd_request *or, + struct osd_sense_info *osi) +{ + return osd_req_decode_sense_full(or, osi, false, NULL, 0, NULL, 0); +} + +/** * osd_end_request - return osd_request to free store * * @or: osd_request to free diff --git a/include/scsi/osd_sense.h b/include/scsi/osd_sense.h new file mode 100644 index 0000000..ff9b33c --- /dev/null +++ b/include/scsi/osd_sense.h @@ -0,0 +1,260 @@ +/* + * osd_sense.h - OSD Related sense handling definitions. + * + * Copyright (C) 2008 Panasas Inc. All rights reserved. + * + * Authors: + * Boaz Harrosh + * Benny Halevy + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 + * + * This file contains types and constants that are defined by the protocol + * Note: All names and symbols are taken from the OSD standard's text. + */ +#ifndef __OSD_SENSE_H__ +#define __OSD_SENSE_H__ + +#include + +/* SPC3r23 4.5.6 Sense key and sense code definitions table 27 */ +enum scsi_sense_keys { + scsi_sk_no_sense = 0x0, + scsi_sk_recovered_error = 0x1, + scsi_sk_not_ready = 0x2, + scsi_sk_medium_error = 0x3, + scsi_sk_hardware_error = 0x4, + scsi_sk_illegal_request = 0x5, + scsi_sk_unit_attention = 0x6, + scsi_sk_data_protect = 0x7, + scsi_sk_blank_check = 0x8, + scsi_sk_vendor_specific = 0x9, + scsi_sk_copy_aborted = 0xa, + scsi_sk_aborted_command = 0xb, + scsi_sk_volume_overflow = 0xd, + scsi_sk_miscompare = 0xe, + scsi_sk_reserved = 0xf, +}; + +/* SPC3r23 4.5.6 Sense key and sense code definitions table 28 */ +/* Note: only those which can be returned by an OSD target. Most of + * these errors are taken care of by the generic scsi layer. + */ +enum osd_additional_sense_codes { + scsi_no_additional_sense_information = 0x0000, + scsi_operation_in_progress = 0x0016, + scsi_cleaning_requested = 0x0017, + scsi_lunr_cause_not_reportable = 0x0400, + scsi_logical_unit_is_in_process_of_becoming_ready = 0x0401, + scsi_lunr_initializing_command_required = 0x0402, + scsi_lunr_manual_intervention_required = 0x0403, + scsi_lunr_operation_in_progress = 0x0407, + scsi_lunr_selftest_in_progress = 0x0409, + scsi_luna_asymmetric_access_state_transition = 0x040a, + scsi_luna_target_port_in_standby_state = 0x040b, + scsi_luna_target_port_in_unavailable_state = 0x040c, + scsi_lunr_notify_enable_spinup_required = 0x0411, + scsi_logical_unit_does_not_respond_to_selection = 0x0500, + scsi_logical_unit_communication_failure = 0x0800, + scsi_logical_unit_communication_timeout = 0x0801, + scsi_logical_unit_communication_parity_error = 0x0802, + scsi_error_log_overflow = 0x0a00, + scsi_warning = 0x0b00, + scsi_warning_specified_temperature_exceeded = 0x0b01, + scsi_warning_enclosure_degraded = 0x0b02, + scsi_write_error_unexpected_unsolicited_data = 0x0c0c, + scsi_write_error_not_enough_unsolicited_data = 0x0c0d, + scsi_invalid_information_unit = 0x0e00, + scsi_invalid_field_in_command_information_unit = 0x0e03, + scsi_read_error_failed_retransmission_request = 0x1113, + scsi_parameter_list_length_error = 0x1a00, + scsi_invalid_command_operation_code = 0x2000, + scsi_invalid_field_in_cdb = 0x2400, + osd_security_audit_value_frozen = 0x2404, + osd_security_working_key_frozen = 0x2405, + osd_nonce_not_unique = 0x2406, + osd_nonce_timestamp_out_of_range = 0x2407, + scsi_logical_unit_not_supported = 0x2500, + scsi_invalid_field_in_parameter_list = 0x2600, + scsi_parameter_not_supported = 0x2601, + scsi_parameter_value_invalid = 0x2602, + scsi_invalid_release_of_persistent_reservation = 0x2604, + osd_invalid_dataout_buffer_integrity_check_value = 0x260f, + scsi_not_ready_to_ready_change_medium_may_have_changed = 0x2800, + scsi_power_on_reset_or_bus_device_reset_occurred = 0x2900, + scsi_power_on_occurred = 0x2901, + scsi_scsi_bus_reset_occurred = 0x2902, + scsi_bus_device_reset_function_occurred = 0x2903, + scsi_device_internal_reset = 0x2904, + scsi_transceiver_mode_changed_to_single_ended = 0x2905, + scsi_transceiver_mode_changed_to_lvd = 0x2906, + scsi_i_t_nexus_loss_occurred = 0x2907, + scsi_parameters_changed = 0x2a00, + scsi_mode_parameters_changed = 0x2a01, + scsi_asymmetric_access_state_changed = 0x2a06, + scsi_priority_changed = 0x2a08, + scsi_command_sequence_error = 0x2c00, + scsi_previous_busy_status = 0x2c07, + scsi_previous_task_set_full_status = 0x2c08, + scsi_previous_reservation_conflict_status = 0x2c09, + osd_partition_or_collection_contains_user_objects = 0x2c0a, + scsi_commands_cleared_by_another_initiator = 0x2f00, + scsi_cleaning_failure = 0x3007, + scsi_enclosure_failure = 0x3400, + scsi_enclosure_services_failure = 0x3500, + scsi_unsupported_enclosure_function = 0x3501, + scsi_enclosure_services_unavailable = 0x3502, + scsi_enclosure_services_transfer_failure = 0x3503, + scsi_enclosure_services_transfer_refused = 0x3504, + scsi_enclosure_services_checksum_error = 0x3505, + scsi_rounded_parameter = 0x3700, + osd_read_past_end_of_user_object = 0x3b17, + scsi_logical_unit_has_not_self_configured_yet = 0x3e00, + scsi_logical_unit_failure = 0x3e01, + scsi_timeout_on_logical_unit = 0x3e02, + scsi_logical_unit_failed_selftest = 0x3e03, + scsi_logical_unit_unable_to_update_selftest_log = 0x3e04, + scsi_target_operating_conditions_have_changed = 0x3f00, + scsi_microcode_has_been_changed = 0x3f01, + scsi_inquiry_data_has_changed = 0x3f03, + scsi_echo_buffer_overwritten = 0x3f0f, + scsi_diagnostic_failure_on_component_nn_first = 0x4080, + scsi_diagnostic_failure_on_component_nn_last = 0x40ff, + scsi_message_error = 0x4300, + scsi_internal_target_failure = 0x4400, + scsi_select_or_reselect_failure = 0x4500, + scsi_scsi_parity_error = 0x4700, + scsi_data_phase_crc_error_detected = 0x4701, + scsi_scsi_parity_error_detected_during_st_data_phase = 0x4702, + scsi_asynchronous_information_protection_error_detected = 0x4704, + scsi_protocol_service_crc_error = 0x4705, + scsi_phy_test_function_in_progress = 0x4706, + scsi_invalid_message_error = 0x4900, + scsi_command_phase_error = 0x4a00, + scsi_data_phase_error = 0x4b00, + scsi_logical_unit_failed_self_configuration = 0x4c00, + scsi_overlapped_commands_attempted = 0x4e00, + osd_quota_error = 0x5507, + scsi_failure_prediction_threshold_exceeded = 0x5d00, + scsi_failure_prediction_threshold_exceeded_false = 0x5dff, + scsi_voltage_fault = 0x6500, +}; + +enum scsi_descriptor_types { + scsi_sense_information = 0x0, + scsi_sense_command_specific_information = 0x1, + scsi_sense_key_specific = 0x2, + scsi_sense_field_replaceable_unit = 0x3, + scsi_sense_stream_commands = 0x4, + scsi_sense_block_commands = 0x5, + osd_sense_object_identification = 0x6, + osd_sense_response_integrity_check = 0x7, + osd_sense_attribute_identification = 0x8, + scsi_sense_ata_return = 0x9, + + scsi_sense_Reserved_first = 0x0A, + scsi_sense_Reserved_last = 0x7F, + scsi_sense_Vendor_specific_first = 0x80, + scsi_sense_Vendor_specific_last = 0xFF, +}; + +struct scsi_sense_descriptor { /* for picking into desc type */ + u8 descriptor_type; /* one of enum scsi_descriptor_types */ + u8 additional_length; /* n - 1 */ + u8 data[]; +} __packed; + +/* OSD deploys only scsi descriptor_based sense buffers */ +struct scsi_sense_descriptor_based { +/*0*/ u8 response_code; /* 0x72 or 0x73 */ +/*1*/ u8 sense_key; /* one of enum scsi_sense_keys (4 lower bits) */ +/*2*/ __be16 additional_sense_code; /* enum osd_additional_sense_codes */ +/*4*/ u8 Reserved[3]; +/*7*/ u8 additional_sense_length; /* n - 7 */ +/*8*/ struct scsi_sense_descriptor ssd[0]; /* variable length, 1 or more */ +} __packed; + +/* some descriptors deployed by OSD */ + +/* SPC3r23 4.5.2.3 Command-specific information sense data descriptor */ +/* Note: this is the same for descriptor_type=00 but with type=00 the + * Reserved[0] == 0x80 (ie. bit-7 set) + */ +struct scsi_sense_command_specific_data_descriptor { +/*0*/ u8 descriptor_type; /* (00h/01h) */ +/*1*/ u8 additional_length; /* (0Ah) */ +/*2*/ u8 Reserved[2]; +/*4*/ __be64 information; +} __packed; +/*12*/ + +struct scsi_sense_key_specific_data_descriptor { +/*0*/ u8 descriptor_type; /* (02h) */ +/*1*/ u8 additional_length; /* (06h) */ +/*2*/ u8 Reserved[2]; +/* SKSV, C/D, Reserved (2), BPV, BIT POINTER (3) */ +/*4*/ u8 sksv_cd_bpv_bp; +/*5*/ __be16 value; /* field-pointer/progress-value/retry-count/... */ +/*7*/ u8 Reserved2; +} __packed; +/*8*/ + +/* 4.16.2.1 OSD error identification sense data descriptor - table 52 */ +/* Note: these bits are defined LE order for easy definition, this way the BIT() + * number is the same as in the documentation. Below members at + * osd_sense_identification_data_descriptor are therefore defined __le32. + */ +enum osd_command_functions_bits { + OSD_CFB_COMMAND = BIT(4), + OSD_CFB_CMD_CAP_VERIFIED = BIT(5), + OSD_CFB_VALIDATION = BIT(7), + OSD_CFB_IMP_ST_ATT = BIT(12), + OSD_CFB_SET_ATT = BIT(20), + OSD_CFB_SA_CAP_VERIFIED = BIT(21), + OSD_CFB_GET_ATT = BIT(28), + OSD_CFB_GA_CAP_VERIFIED = BIT(29), +}; + +struct osd_sense_identification_data_descriptor { +/*0*/ u8 descriptor_type; /* (06h) */ +/*1*/ u8 additional_length; /* (1Eh) */ +/*2*/ u8 Reserved[6]; +/*8*/ __le32 not_initiated_functions; /*osd_command_functions_bits*/ +/*12*/ __le32 completed_functions; /*osd_command_functions_bits*/ +/*16*/ __be64 partition_id; +/*24*/ __be64 object_id; +} __packed; +/*32*/ + +struct osd_sense_response_integrity_check_descriptor { +/*0*/ u8 descriptor_type; /* (07h) */ +/*1*/ u8 additional_length; /* (20h) */ +/*2*/ u8 integrity_check_value[32]; /*FIXME: OSDv2_CRYPTO_KEYID_SIZE*/ +} __packed; +/*34*/ + +struct osd_sense_attributes_data_descriptor { +/*0*/ u8 descriptor_type; /* (08h) */ +/*1*/ u8 additional_length; /* (n-2) */ +/*2*/ u8 Reserved[6]; + struct osd_sense_attr { +/*8*/ __be32 attr_page; +/*12*/ __be32 attr_id; +/*16*/ } sense_attrs[0]; /* 1 or more */ +} __packed; +/*variable*/ + +/* Dig into scsi_sk_illegal_request/scsi_invalid_field_in_cdb errors */ + +/*FIXME: Support also field in CAPS*/ +#define OSD_CDB_OFFSET(F) offsetof(struct osd_cdb_head, F) + +enum osdv2_cdb_field_offset { + OSDv1_CFO_STARTING_BYTE = OSD_CDB_OFFSET(v1.start_address), + OSD_CFO_STARTING_BYTE = OSD_CDB_OFFSET(v2.start_address), + OSD_CFO_PARTITION_ID = OSD_CDB_OFFSET(partition), + OSD_CFO_OBJECT_ID = OSD_CDB_OFFSET(object), +}; + +#endif /* ndef __OSD_SENSE_H__ */ -- cgit v0.10.2 From 78e0c621deca08e5f802383dbe75fd20b258ea4e Mon Sep 17 00:00:00 2001 From: Boaz Harrosh Date: Sun, 25 Jan 2009 17:21:40 +0200 Subject: [SCSI] osd: Documentation for OSD library Add osd.txt to Documentation/scsi/ Signed-off-by: Boaz Harrosh Reviewed-by: Benny Halevy Signed-off-by: James Bottomley diff --git a/Documentation/scsi/osd.txt b/Documentation/scsi/osd.txt new file mode 100644 index 0000000..da162f7 --- /dev/null +++ b/Documentation/scsi/osd.txt @@ -0,0 +1,198 @@ +The OSD Standard +================ +OSD (Object-Based Storage Device) is a T10 SCSI command set that is designed +to provide efficient operation of input/output logical units that manage the +allocation, placement, and accessing of variable-size data-storage containers, +called objects. Objects are intended to contain operating system and application +constructs. Each object has associated attributes attached to it, which are +integral part of the object and provide metadata about the object. The standard +defines some common obligatory attributes, but user attributes can be added as +needed. + +See: http://www.t10.org/ftp/t10/drafts/osd2/ for the latest draft for OSD 2 +or search the web for "OSD SCSI" + +OSD in the Linux Kernel +======================= +osd-initiator: + The main component of OSD in Kernel is the osd-initiator library. Its main +user is intended to be the pNFS-over-objects layout driver, which uses objects +as its back-end data storage. Other clients are the other osd parts listed below. + +osd-uld: + This is a SCSI ULD that registers for OSD type devices and provides a testing +platform, both for the in-kernel initiator as well as connected targets. It +currently has no useful user-mode API, though it could have if need be. + +exofs: + Is an OSD based Linux file system. It uses the osd-initiator and osd-uld, +to export a usable file system for users. +See Documentation/filesystems/exofs.txt for more details + +osd target: + There are no current plans for an OSD target implementation in kernel. For all +needs, a user-mode target that is based on the scsi tgt target framework is +available from Ohio Supercomputer Center (OSC) at: +http://www.open-osd.org/bin/view/Main/OscOsdProject +There are several other target implementations. See http://open-osd.org for more +links. + +Files and Folders +================= +This is the complete list of files included in this work: +include/scsi/ + osd_initiator.h Main API for the initiator library + osd_types.h Common OSD types + osd_sec.h Security Manager API + osd_protocol.h Wire definitions of the OSD standard protocol + osd_attributes.h Wire definitions of OSD attributes + +drivers/scsi/osd/ + osd_initiator.c OSD-Initiator library implementation + osd_uld.c The OSD scsi ULD + osd_ktest.{h,c} In-kernel test suite (called by osd_uld) + osd_debug.h Some printk macros + Makefile For both in-tree and out-of-tree compilation + Kconfig Enables inclusion of the different pieces + osd_test.c User-mode application to call the kernel tests + +The OSD-Initiator Library +========================= +osd_initiator is a low level implementation of an osd initiator encoder. +But even though, it should be intuitive and easy to use. Perhaps over time an +higher lever will form that automates some of the more common recipes. + +init/fini: +- osd_dev_init() associates a scsi_device with an osd_dev structure + and initializes some global pools. This should be done once per scsi_device + (OSD LUN). The osd_dev structure is needed for calling osd_start_request(). + +- osd_dev_fini() cleans up before a osd_dev/scsi_device destruction. + +OSD commands encoding, execution, and decoding of results: + +struct osd_request's is used to iteratively encode an OSD command and carry +its state throughout execution. Each request goes through these stages: + +a. osd_start_request() allocates the request. + +b. Any of the osd_req_* methods is used to encode a request of the specified + type. + +c. osd_req_add_{get,set}_attr_* may be called to add get/set attributes to the + CDB. "List" or "Page" mode can be used exclusively. The attribute-list API + can be called multiple times on the same request. However, only one + attribute-page can be read, as mandated by the OSD standard. + +d. osd_finalize_request() computes offsets into the data-in and data-out buffers + and signs the request using the provided capability key and integrity- + check parameters. + +e. osd_execute_request() may be called to execute the request via the block + layer and wait for its completion. The request can be executed + asynchronously by calling the block layer API directly. + +f. After execution, osd_req_decode_sense() can be called to decode the request's + sense information. + +g. osd_req_decode_get_attr() may be called to retrieve osd_add_get_attr_list() + values. + +h. osd_end_request() must be called to deallocate the request and any resource + associated with it. Note that osd_end_request cleans up the request at any + stage and it must always be called after a successful osd_start_request(). + +osd_request's structure: + +The OSD standard defines a complex structure of IO segments pointed to by +members in the CDB. Up to 3 segments can be deployed in the IN-Buffer and up to +4 in the OUT-Buffer. The ASCII illustration below depicts a secure-read with +associated get+set of attributes-lists. Other combinations very on the same +basic theme. From no-segments-used up to all-segments-used. + +|________OSD-CDB__________| +| | +|read_len (offset=0) -|---------\ +| | | +|get_attrs_list_length | | +|get_attrs_list_offset -|----\ | +| | | | +|retrieved_attrs_alloc_len| | | +|retrieved_attrs_offset -|----|----|-\ +| | | | | +|set_attrs_list_length | | | | +|set_attrs_list_offset -|-\ | | | +| | | | | | +|in_data_integ_offset -|-|--|----|-|-\ +|out_data_integ_offset -|-|--|--\ | | | +\_________________________/ | | | | | | + | | | | | | +|_______OUT-BUFFER________| | | | | | | +| Set attr list | + +More up-to-date information can be found on: +http://open-osd.org + +Boaz Harrosh +Benny Halevy + +References +========== +Weber, R., "SCSI Object-Based Storage Device Commands", +T10/1355-D ANSI/INCITS 400-2004, +http://www.t10.org/ftp/t10/drafts/osd/osd-r10.pdf + +Weber, R., "SCSI Object-Based Storage Device Commands -2 (OSD-2)" +T10/1729-D, Working Draft, rev. 3 +http://www.t10.org/ftp/t10/drafts/osd2/osd2r03.pdf -- cgit v0.10.2 From 6864abd8b730435d6ae9cb061095229a5a85153f Mon Sep 17 00:00:00 2001 From: Boaz Harrosh Date: Sun, 25 Jan 2009 17:22:52 +0200 Subject: [SCSI] osd: Kconfig file for in-tree builds Kconfig file for the drivers/scsi/osd subdirectory. Adds the following config items: config SCSI_OSD_INITIATOR config SCSI_OSD_ULD config SCSI_OSD_DPRINT_SENSE config SCSI_OSD_DEBUG Signed-off-by: Boaz Harrosh Reviewed-by: Benny Halevy Signed-off-by: James Bottomley diff --git a/drivers/scsi/osd/Kconfig b/drivers/scsi/osd/Kconfig new file mode 100644 index 0000000..861b5ce --- /dev/null +++ b/drivers/scsi/osd/Kconfig @@ -0,0 +1,53 @@ +# +# Kernel configuration file for the OSD scsi protocol +# +# Copyright (C) 2008 Panasas Inc. All rights reserved. +# +# Authors: +# Boaz Harrosh +# Benny Halevy +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public version 2 License as +# published by the Free Software Foundation +# +# FIXME: SCSI_OSD_INITIATOR should select CONFIG (HMAC) SHA1 somehow. +# How is it done properly? +# + +config SCSI_OSD_INITIATOR + tristate "OSD-Initiator library" + depends on SCSI + help + Enable the OSD-Initiator library (libosd.ko). + NOTE: You must also select CRYPTO_SHA1 + CRYPTO_HMAC and their + dependencies + +config SCSI_OSD_ULD + tristate "OSD Upper Level driver" + depends on SCSI_OSD_INITIATOR + help + Build a SCSI upper layer driver that exports /dev/osdX devices + to user-mode for testing and controlling OSD devices. It is also + needed by exofs, for mounting an OSD based file system. + +config SCSI_OSD_DPRINT_SENSE + int "(0-2) When sense is returned, DEBUG print all sense descriptors" + default 1 + depends on SCSI_OSD_INITIATOR + help + When a CHECK_CONDITION status is returned from a target, and a + sense-buffer is retrieved, turning this on will dump a full + sense-decoding message. Setting to 2 will also print recoverable + errors that might be regularly returned for some filesystem + operations. + +config SCSI_OSD_DEBUG + bool "Compile All OSD modules with lots of DEBUG prints" + default n + depends on SCSI_OSD_INITIATOR + help + OSD Code is populated with lots of OSD_DEBUG(..) printouts to + dmesg. Enable this if you found a bug and you want to help us + track the problem (see also MAINTAINERS). Setting this will also + force SCSI_OSD_DPRINT_SENSE=2. -- cgit v0.10.2 From 68274794c69991121eaf0a4a35b78aa7f088ec2c Mon Sep 17 00:00:00 2001 From: Boaz Harrosh Date: Sun, 25 Jan 2009 17:24:14 +0200 Subject: [SCSI] scsi: Add osd library to build system OSD in kernel source code is assumed to be at: drivers/scsi/osd/ with its own Makefile and Kconfig Add includes to them from drivers/scsi Makefile and Kconfig Add OSD to MAINTAINERS file Signed-off-by: Boaz Harrosh Reviewed-by: Benny Halevy Signed-off-by: James Bottomley diff --git a/MAINTAINERS b/MAINTAINERS index 1c2ca1d..e26fb02 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -3291,6 +3291,16 @@ L: orinoco-devel@lists.sourceforge.net W: http://www.nongnu.org/orinoco/ S: Maintained +OSD LIBRARY +P: Boaz Harrosh +M: bharrosh@panasas.com +P: Benny Halevy +M: bhalevy@panasas.com +L: osd-dev@open-osd.org +W: http://open-osd.org +T: git://git.open-osd.org/open-osd.git +S: Maintained + P54 WIRELESS DRIVER P: Michael Wu M: flamingice@sourmilk.net diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig index 601c2a8..e420ad0 100644 --- a/drivers/scsi/Kconfig +++ b/drivers/scsi/Kconfig @@ -1806,4 +1806,6 @@ source "drivers/scsi/pcmcia/Kconfig" source "drivers/scsi/device_handler/Kconfig" +source "drivers/scsi/osd/Kconfig" + endmenu diff --git a/drivers/scsi/Makefile b/drivers/scsi/Makefile index 7461eb0..05558b1 100644 --- a/drivers/scsi/Makefile +++ b/drivers/scsi/Makefile @@ -137,6 +137,8 @@ obj-$(CONFIG_CHR_DEV_SG) += sg.o obj-$(CONFIG_CHR_DEV_SCH) += ch.o obj-$(CONFIG_SCSI_ENCLOSURE) += ses.o +obj-$(CONFIG_SCSI_OSD_INITIATOR) += osd/ + # This goes last, so that "real" scsi devices probe earlier obj-$(CONFIG_SCSI_DEBUG) += scsi_debug.o -- cgit v0.10.2 From 78a42ce8fb2604c459e9ebb2a4f2d546b8250111 Mon Sep 17 00:00:00 2001 From: FUJITA Tomonori Date: Sun, 14 Dec 2008 00:55:17 +0900 Subject: [SCSI] osst: make all the buffer the same size This simiplifies the buffer management; all the buffers in osst_buffer become the same size. This is necessary to use the block layer API (sg driver was modified in the same way) since the block layer API takes the same size page frames instead of scatter gatter. Signed-off-by: FUJITA Tomonori Cc: Willem Riede Signed-off-by: James Bottomley diff --git a/drivers/scsi/osst.c b/drivers/scsi/osst.c index 8f21cbb..13f908c 100644 --- a/drivers/scsi/osst.c +++ b/drivers/scsi/osst.c @@ -5286,11 +5286,6 @@ static int enlarge_buffer(struct osst_buffer *STbuffer, int need_dma) struct page *page = alloc_pages(priority, (OS_FRAME_SIZE - got <= PAGE_SIZE) ? 0 : order); STbuffer->sg[segs].offset = 0; if (page == NULL) { - if (OS_FRAME_SIZE - got <= (max_segs - segs) * b_size / 2 && order) { - b_size /= 2; /* Large enough for the rest of the buffers */ - order--; - continue; - } printk(KERN_WARNING "osst :W: Failed to enlarge buffer to %d bytes.\n", OS_FRAME_SIZE); #if DEBUG -- cgit v0.10.2 From 26243043f207b3faa00594a33e10b2103205f27b Mon Sep 17 00:00:00 2001 From: FUJITA Tomonori Date: Sun, 14 Dec 2008 00:55:18 +0900 Subject: [SCSI] osst: replace scsi_execute_async with the block layer API This replaces scsi_execute_async with the block layer API. st does the same thing so it might make sense to have something like libst (there are other things that os and osst can share). Signed-off-by: FUJITA Tomonori Cc: Willem Riede Signed-off-by: James Bottomley diff --git a/drivers/scsi/osst.c b/drivers/scsi/osst.c index 13f908c..acb8358 100644 --- a/drivers/scsi/osst.c +++ b/drivers/scsi/osst.c @@ -317,18 +317,25 @@ static int osst_chk_result(struct osst_tape * STp, struct osst_request * SRpnt) /* Wakeup from interrupt */ -static void osst_sleep_done(void *data, char *sense, int result, int resid) +static void osst_end_async(struct request *req, int update) { - struct osst_request *SRpnt = data; + struct osst_request *SRpnt = req->end_io_data; struct osst_tape *STp = SRpnt->stp; + struct rq_map_data *mdata = &SRpnt->stp->buffer->map_data; - memcpy(SRpnt->sense, sense, SCSI_SENSE_BUFFERSIZE); - STp->buffer->cmdstat.midlevel_result = SRpnt->result = result; + STp->buffer->cmdstat.midlevel_result = SRpnt->result = req->errors; #if DEBUG STp->write_pending = 0; #endif if (SRpnt->waiting) complete(SRpnt->waiting); + + if (SRpnt->bio) { + kfree(mdata->pages); + blk_rq_unmap_user(SRpnt->bio); + } + + __blk_put_request(req->q, req); } /* osst_request memory management */ @@ -342,6 +349,74 @@ static void osst_release_request(struct osst_request *streq) kfree(streq); } +static int osst_execute(struct osst_request *SRpnt, const unsigned char *cmd, + int cmd_len, int data_direction, void *buffer, unsigned bufflen, + int use_sg, int timeout, int retries) +{ + struct request *req; + struct page **pages = NULL; + struct rq_map_data *mdata = &SRpnt->stp->buffer->map_data; + + int err = 0; + int write = (data_direction == DMA_TO_DEVICE); + + req = blk_get_request(SRpnt->stp->device->request_queue, write, GFP_KERNEL); + if (!req) + return DRIVER_ERROR << 24; + + req->cmd_type = REQ_TYPE_BLOCK_PC; + req->cmd_flags |= REQ_QUIET; + + SRpnt->bio = NULL; + + if (use_sg) { + struct scatterlist *sg, *sgl = (struct scatterlist *)buffer; + int i; + + pages = kzalloc(use_sg * sizeof(struct page *), GFP_KERNEL); + if (!pages) + goto free_req; + + for_each_sg(sgl, sg, use_sg, i) + pages[i] = sg_page(sg); + + mdata->null_mapped = 1; + + mdata->page_order = get_order(sgl[0].length); + mdata->nr_entries = + DIV_ROUND_UP(bufflen, PAGE_SIZE << mdata->page_order); + mdata->offset = 0; + + err = blk_rq_map_user(req->q, req, mdata, NULL, bufflen, GFP_KERNEL); + if (err) { + kfree(pages); + goto free_req; + } + SRpnt->bio = req->bio; + mdata->pages = pages; + + } else if (bufflen) { + err = blk_rq_map_kern(req->q, req, buffer, bufflen, GFP_KERNEL); + if (err) + goto free_req; + } + + req->cmd_len = cmd_len; + memset(req->cmd, 0, BLK_MAX_CDB); /* ATAPI hates garbage after CDB */ + memcpy(req->cmd, cmd, req->cmd_len); + req->sense = SRpnt->sense; + req->sense_len = 0; + req->timeout = timeout; + req->retries = retries; + req->end_io_data = SRpnt; + + blk_execute_rq_nowait(req->q, NULL, req, 1, osst_end_async); + return 0; +free_req: + blk_put_request(req); + return DRIVER_ERROR << 24; +} + /* Do the scsi command. Waits until command performed if do_wait is true. Otherwise osst_write_behind_check() is used to check that the command has finished. */ @@ -403,8 +478,8 @@ static struct osst_request * osst_do_scsi(struct osst_request *SRpnt, struct oss STp->buffer->cmdstat.have_sense = 0; STp->buffer->syscall_result = 0; - if (scsi_execute_async(STp->device, cmd, COMMAND_SIZE(cmd[0]), direction, bp, bytes, - use_sg, timeout, retries, SRpnt, osst_sleep_done, GFP_KERNEL)) + if (osst_execute(SRpnt, cmd, COMMAND_SIZE(cmd[0]), direction, bp, bytes, + use_sg, timeout, retries)) /* could not allocate the buffer or request was too large */ (STp->buffer)->syscall_result = (-EBUSY); else if (do_wait) { diff --git a/drivers/scsi/osst.h b/drivers/scsi/osst.h index 5aa2274..11d26c5 100644 --- a/drivers/scsi/osst.h +++ b/drivers/scsi/osst.h @@ -520,6 +520,7 @@ struct osst_buffer { int syscall_result; struct osst_request *last_SRpnt; struct st_cmdstatus cmdstat; + struct rq_map_data map_data; unsigned char *b_data; os_aux_t *aux; /* onstream AUX structure at end of each block */ unsigned short use_sg; /* zero or number of s/g segments for this adapter */ @@ -634,6 +635,7 @@ struct osst_request { int result; struct osst_tape *stp; struct completion *waiting; + struct bio *bio; }; /* Values of write_type */ -- cgit v0.10.2 From f078727b250c2653fc9a564f15547c17ebac3f99 Mon Sep 17 00:00:00 2001 From: FUJITA Tomonori Date: Sun, 14 Dec 2008 01:23:45 +0900 Subject: [SCSI] remove scsi_req_map_sg No one uses scsi_execute_async with data transfer now. We can remove scsi_req_map_sg. Only scsi_eh_lock_door uses scsi_execute_async. scsi_eh_lock_door doesn't handle sense and the callback. So we can remove scsi_io_context too. Signed-off-by: FUJITA Tomonori Signed-off-by: James Bottomley diff --git a/drivers/scsi/scsi_error.c b/drivers/scsi/scsi_error.c index ad6a137..0c2c73b 100644 --- a/drivers/scsi/scsi_error.c +++ b/drivers/scsi/scsi_error.c @@ -1441,6 +1441,11 @@ int scsi_decide_disposition(struct scsi_cmnd *scmd) } } +static void eh_lock_door_done(struct request *req, int uptodate) +{ + __blk_put_request(req->q, req); +} + /** * scsi_eh_lock_door - Prevent medium removal for the specified device * @sdev: SCSI device to prevent medium removal @@ -1463,19 +1468,28 @@ int scsi_decide_disposition(struct scsi_cmnd *scmd) */ static void scsi_eh_lock_door(struct scsi_device *sdev) { - unsigned char cmnd[MAX_COMMAND_SIZE]; + struct request *req; - cmnd[0] = ALLOW_MEDIUM_REMOVAL; - cmnd[1] = 0; - cmnd[2] = 0; - cmnd[3] = 0; - cmnd[4] = SCSI_REMOVAL_PREVENT; - cmnd[5] = 0; + req = blk_get_request(sdev->request_queue, READ, GFP_KERNEL); + if (!req) + return; - scsi_execute_async(sdev, cmnd, 6, DMA_NONE, NULL, 0, 0, 10 * HZ, - 5, NULL, NULL, GFP_KERNEL); -} + req->cmd[0] = ALLOW_MEDIUM_REMOVAL; + req->cmd[1] = 0; + req->cmd[2] = 0; + req->cmd[3] = 0; + req->cmd[4] = SCSI_REMOVAL_PREVENT; + req->cmd[5] = 0; + req->cmd_len = COMMAND_SIZE(req->cmd[0]); + + req->cmd_type = REQ_TYPE_BLOCK_PC; + req->cmd_flags |= REQ_QUIET; + req->timeout = 10 * HZ; + req->retries = 5; + + blk_execute_rq_nowait(req->q, NULL, req, 1, eh_lock_door_done); +} /** * scsi_restart_operations - restart io operations to the specified host. diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c index b82ffd9..4b13e36 100644 --- a/drivers/scsi/scsi_lib.c +++ b/drivers/scsi/scsi_lib.c @@ -277,196 +277,6 @@ int scsi_execute_req(struct scsi_device *sdev, const unsigned char *cmd, } EXPORT_SYMBOL(scsi_execute_req); -struct scsi_io_context { - void *data; - void (*done)(void *data, char *sense, int result, int resid); - char sense[SCSI_SENSE_BUFFERSIZE]; -}; - -static struct kmem_cache *scsi_io_context_cache; - -static void scsi_end_async(struct request *req, int uptodate) -{ - struct scsi_io_context *sioc = req->end_io_data; - - if (sioc->done) - sioc->done(sioc->data, sioc->sense, req->errors, req->data_len); - - kmem_cache_free(scsi_io_context_cache, sioc); - __blk_put_request(req->q, req); -} - -static int scsi_merge_bio(struct request *rq, struct bio *bio) -{ - struct request_queue *q = rq->q; - - bio->bi_flags &= ~(1 << BIO_SEG_VALID); - if (rq_data_dir(rq) == WRITE) - bio->bi_rw |= (1 << BIO_RW); - blk_queue_bounce(q, &bio); - - return blk_rq_append_bio(q, rq, bio); -} - -static void scsi_bi_endio(struct bio *bio, int error) -{ - bio_put(bio); -} - -/** - * scsi_req_map_sg - map a scatterlist into a request - * @rq: request to fill - * @sgl: scatterlist - * @nsegs: number of elements - * @bufflen: len of buffer - * @gfp: memory allocation flags - * - * scsi_req_map_sg maps a scatterlist into a request so that the - * request can be sent to the block layer. We do not trust the scatterlist - * sent to use, as some ULDs use that struct to only organize the pages. - */ -static int scsi_req_map_sg(struct request *rq, struct scatterlist *sgl, - int nsegs, unsigned bufflen, gfp_t gfp) -{ - struct request_queue *q = rq->q; - int nr_pages = (bufflen + sgl[0].offset + PAGE_SIZE - 1) >> PAGE_SHIFT; - unsigned int data_len = bufflen, len, bytes, off; - struct scatterlist *sg; - struct page *page; - struct bio *bio = NULL; - int i, err, nr_vecs = 0; - - for_each_sg(sgl, sg, nsegs, i) { - page = sg_page(sg); - off = sg->offset; - len = sg->length; - - while (len > 0 && data_len > 0) { - /* - * sg sends a scatterlist that is larger than - * the data_len it wants transferred for certain - * IO sizes - */ - bytes = min_t(unsigned int, len, PAGE_SIZE - off); - bytes = min(bytes, data_len); - - if (!bio) { - nr_vecs = min_t(int, BIO_MAX_PAGES, nr_pages); - nr_pages -= nr_vecs; - - bio = bio_alloc(gfp, nr_vecs); - if (!bio) { - err = -ENOMEM; - goto free_bios; - } - bio->bi_end_io = scsi_bi_endio; - } - - if (bio_add_pc_page(q, bio, page, bytes, off) != - bytes) { - bio_put(bio); - err = -EINVAL; - goto free_bios; - } - - if (bio->bi_vcnt >= nr_vecs) { - err = scsi_merge_bio(rq, bio); - if (err) { - bio_endio(bio, 0); - goto free_bios; - } - bio = NULL; - } - - page++; - len -= bytes; - data_len -=bytes; - off = 0; - } - } - - rq->buffer = rq->data = NULL; - rq->data_len = bufflen; - return 0; - -free_bios: - while ((bio = rq->bio) != NULL) { - rq->bio = bio->bi_next; - /* - * call endio instead of bio_put incase it was bounced - */ - bio_endio(bio, 0); - } - - return err; -} - -/** - * scsi_execute_async - insert request - * @sdev: scsi device - * @cmd: scsi command - * @cmd_len: length of scsi cdb - * @data_direction: DMA_TO_DEVICE, DMA_FROM_DEVICE, or DMA_NONE - * @buffer: data buffer (this can be a kernel buffer or scatterlist) - * @bufflen: len of buffer - * @use_sg: if buffer is a scatterlist this is the number of elements - * @timeout: request timeout in seconds - * @retries: number of times to retry request - * @privdata: data passed to done() - * @done: callback function when done - * @gfp: memory allocation flags - */ -int scsi_execute_async(struct scsi_device *sdev, const unsigned char *cmd, - int cmd_len, int data_direction, void *buffer, unsigned bufflen, - int use_sg, int timeout, int retries, void *privdata, - void (*done)(void *, char *, int, int), gfp_t gfp) -{ - struct request *req; - struct scsi_io_context *sioc; - int err = 0; - int write = (data_direction == DMA_TO_DEVICE); - - sioc = kmem_cache_zalloc(scsi_io_context_cache, gfp); - if (!sioc) - return DRIVER_ERROR << 24; - - req = blk_get_request(sdev->request_queue, write, gfp); - if (!req) - goto free_sense; - req->cmd_type = REQ_TYPE_BLOCK_PC; - req->cmd_flags |= REQ_QUIET; - - if (use_sg) - err = scsi_req_map_sg(req, buffer, use_sg, bufflen, gfp); - else if (bufflen) - err = blk_rq_map_kern(req->q, req, buffer, bufflen, gfp); - - if (err) - goto free_req; - - req->cmd_len = cmd_len; - memset(req->cmd, 0, BLK_MAX_CDB); /* ATAPI hates garbage after CDB */ - memcpy(req->cmd, cmd, req->cmd_len); - req->sense = sioc->sense; - req->sense_len = 0; - req->timeout = timeout; - req->retries = retries; - req->end_io_data = sioc; - - sioc->data = privdata; - sioc->done = done; - - blk_execute_rq_nowait(req->q, NULL, req, 1, scsi_end_async); - return 0; - -free_req: - blk_put_request(req); -free_sense: - kmem_cache_free(scsi_io_context_cache, sioc); - return DRIVER_ERROR << 24; -} -EXPORT_SYMBOL_GPL(scsi_execute_async); - /* * Function: scsi_init_cmd_errh() * @@ -1920,20 +1730,12 @@ int __init scsi_init_queue(void) { int i; - scsi_io_context_cache = kmem_cache_create("scsi_io_context", - sizeof(struct scsi_io_context), - 0, 0, NULL); - if (!scsi_io_context_cache) { - printk(KERN_ERR "SCSI: can't init scsi io context cache\n"); - return -ENOMEM; - } - scsi_sdb_cache = kmem_cache_create("scsi_data_buffer", sizeof(struct scsi_data_buffer), 0, 0, NULL); if (!scsi_sdb_cache) { printk(KERN_ERR "SCSI: can't init scsi sdb cache\n"); - goto cleanup_io_context; + return -ENOMEM; } for (i = 0; i < SG_MEMPOOL_NR; i++) { @@ -1968,8 +1770,6 @@ cleanup_sdb: kmem_cache_destroy(sgp->slab); } kmem_cache_destroy(scsi_sdb_cache); -cleanup_io_context: - kmem_cache_destroy(scsi_io_context_cache); return -ENOMEM; } @@ -1978,7 +1778,6 @@ void scsi_exit_queue(void) { int i; - kmem_cache_destroy(scsi_io_context_cache); kmem_cache_destroy(scsi_sdb_cache); for (i = 0; i < SG_MEMPOOL_NR; i++) { diff --git a/include/scsi/scsi_device.h b/include/scsi/scsi_device.h index 15b0926..3f566af 100644 --- a/include/scsi/scsi_device.h +++ b/include/scsi/scsi_device.h @@ -371,12 +371,6 @@ extern int scsi_execute_req(struct scsi_device *sdev, const unsigned char *cmd, int data_direction, void *buffer, unsigned bufflen, struct scsi_sense_hdr *, int timeout, int retries, int *resid); -extern int scsi_execute_async(struct scsi_device *sdev, - const unsigned char *cmd, int cmd_len, int data_direction, - void *buffer, unsigned bufflen, int use_sg, - int timeout, int retries, void *privdata, - void (*done)(void *, char *, int, int), - gfp_t gfp); static inline int __must_check scsi_device_reprobe(struct scsi_device *sdev) { -- cgit v0.10.2 From ef3fa8c6a2e7c53dbaf2eb33a09ad05177425f12 Mon Sep 17 00:00:00 2001 From: Ilgu Hong Date: Fri, 30 Jan 2009 17:00:09 -0600 Subject: [SCSI] scsi dh alua: fix group id masking The buf[i] is a byte but we are only asking 4 bits off the group_id. This patch has us take off a byte. Signed-off-by: Ilgu Hong Signed-off-by: Mike Christie Signed-off-by: James Bottomley diff --git a/drivers/scsi/device_handler/scsi_dh_alua.c b/drivers/scsi/device_handler/scsi_dh_alua.c index e356b43..5096b0b 100644 --- a/drivers/scsi/device_handler/scsi_dh_alua.c +++ b/drivers/scsi/device_handler/scsi_dh_alua.c @@ -247,8 +247,8 @@ static unsigned submit_stpg(struct scsi_device *sdev, struct alua_dh_data *h) /* Prepare the data buffer */ memset(h->buff, 0, stpg_len); h->buff[4] = TPGS_STATE_OPTIMIZED & 0x0f; - h->buff[6] = (h->group_id >> 8) & 0x0f; - h->buff[7] = h->group_id & 0x0f; + h->buff[6] = (h->group_id >> 8) & 0xff; + h->buff[7] = h->group_id & 0xff; rq = get_alua_req(sdev, h->buff, stpg_len, WRITE); if (!rq) -- cgit v0.10.2 From 49baef0a5dc3c964601c656c1bb2c3458a6934c6 Mon Sep 17 00:00:00 2001 From: Ilgu Hong Date: Fri, 30 Jan 2009 17:00:10 -0600 Subject: [SCSI] scsi dh alua: add intel Multi-Flex device This adds the Intel Multi-Flex device to scsi_dh_alua's scsi_dh_devlist, so the module attaches to these devs. Signed-off-by: Ilgu Hong Signed-off-by: Mike Christie Signed-off-by: James Bottomley diff --git a/drivers/scsi/device_handler/scsi_dh_alua.c b/drivers/scsi/device_handler/scsi_dh_alua.c index 5096b0b..31e1df5 100644 --- a/drivers/scsi/device_handler/scsi_dh_alua.c +++ b/drivers/scsi/device_handler/scsi_dh_alua.c @@ -691,6 +691,7 @@ static const struct scsi_dh_devlist alua_dev_list[] = { {"IBM", "2107900" }, {"IBM", "2145" }, {"Pillar", "Axiom" }, + {"Intel", "Multi-Flex"}, {NULL, NULL} }; -- cgit v0.10.2 From 4d086f6baf73c02d12482c27c9f1e0682825ca13 Mon Sep 17 00:00:00 2001 From: Ilgu Hong Date: Fri, 30 Jan 2009 17:00:11 -0600 Subject: [SCSI] scsi dh alua: handle report luns data changed in check sense callout When we switch controllers the Intel Multi-Flex reports REPORTED_LUNS_DATA_HAS_CHANGED. This patch just has us retry the command. Signed-off-by: Ilgu Hong Signed-off-by: Mike Christie Signed-off-by: James Bottomley diff --git a/drivers/scsi/device_handler/scsi_dh_alua.c b/drivers/scsi/device_handler/scsi_dh_alua.c index 31e1df5..dba154c 100644 --- a/drivers/scsi/device_handler/scsi_dh_alua.c +++ b/drivers/scsi/device_handler/scsi_dh_alua.c @@ -461,6 +461,15 @@ static int alua_check_sense(struct scsi_device *sdev, */ return ADD_TO_MLQUEUE; } + if (sense_hdr->asc == 0x3f && sense_hdr->ascq == 0x0e) { + /* + * REPORTED_LUNS_DATA_HAS_CHANGED is reported + * when switching controllers on targets like + * Intel Multi-Flex. We can just retry. + */ + return ADD_TO_MLQUEUE; + } + break; } -- cgit v0.10.2 From b75424fcfe8fae56344a65e3f04bbc7e975e750e Mon Sep 17 00:00:00 2001 From: Wayne Boyer Date: Wed, 28 Jan 2009 08:24:50 -0800 Subject: [SCSI] ipr: add message to error table Adds a message to the error table for an error that wasn't previously handled. In some cases the I/O Adapter will detect an error condition and mark a block as "logically bad". Signed-off-by: Wayne Boyer Signed-off-by: James Bottomley diff --git a/drivers/scsi/ipr.c b/drivers/scsi/ipr.c index 3f47cd1..9d54c20 100644 --- a/drivers/scsi/ipr.c +++ b/drivers/scsi/ipr.c @@ -354,6 +354,8 @@ struct ipr_error_table_t ipr_error_table[] = { "9076: Configuration error, missing remote IOA"}, {0x06679100, 0, IPR_DEFAULT_LOG_LEVEL, "4050: Enclosure does not support a required multipath function"}, + {0x06690000, 0, IPR_DEFAULT_LOG_LEVEL, + "4070: Logically bad block written on device"}, {0x06690200, 0, IPR_DEFAULT_LOG_LEVEL, "9041: Array protection temporarily suspended"}, {0x06698200, 0, IPR_DEFAULT_LOG_LEVEL, -- cgit v0.10.2 From ea41e41588c248ee8b8162869c1e1c0565a4b3f6 Mon Sep 17 00:00:00 2001 From: "Chauhan, Vijay" Date: Mon, 26 Jan 2009 21:29:37 +0530 Subject: [SCSI] scsi_dh_rdac: Retry for Quiescence in Progress in rdac device handler During device discovery read capacity fails with 0x068b02 and sets the device size to 0. As a reason any I/O submitted to this path gets killed at sd_prep_fn with BLKPREP_KILL. This patch is to retry for 0x068b02 Signed-off-by: Vijay Chauhan Acked-by: Chandra Seetharaman Signed-off-by: James Bottomley diff --git a/drivers/scsi/device_handler/scsi_dh_rdac.c b/drivers/scsi/device_handler/scsi_dh_rdac.c index 5366476..f2b9d19 100644 --- a/drivers/scsi/device_handler/scsi_dh_rdac.c +++ b/drivers/scsi/device_handler/scsi_dh_rdac.c @@ -579,6 +579,11 @@ static int rdac_check_sense(struct scsi_device *sdev, * Power On, Reset, or Bus Device Reset, just retry. */ return ADD_TO_MLQUEUE; + if (sense_hdr->asc == 0x8b && sense_hdr->ascq == 0x02) + /* + * Quiescence in progress , just retry. + */ + return ADD_TO_MLQUEUE; break; } /* success just means we do not care what scsi-ml does */ -- cgit v0.10.2 From a3b7aeaba29e3dd995ece05ba50db9e0650c16b6 Mon Sep 17 00:00:00 2001 From: Brian King Date: Mon, 2 Feb 2009 18:39:40 -0600 Subject: [SCSI] ibmvfc: Better handle other FC initiators The ibmvfc driver currently always sets the role of all rports to FC_PORT_ROLE_FCP_TARGET, which is not correct for other initiators. This can cause problems if other initiators are on the fabric when we then try to scan the rport for LUNs. Fix this by looking at the service parameters returned in the PRLI to set the roles appropriately. Also look at the returned service parameters to decide whether or not we were actually able to successfully log into the target. Signed-off-by: Brian King Signed-off-by: James Bottomley diff --git a/drivers/scsi/ibmvscsi/ibmvfc.c b/drivers/scsi/ibmvscsi/ibmvfc.c index ed1e728..93d1fbe 100644 --- a/drivers/scsi/ibmvscsi/ibmvfc.c +++ b/drivers/scsi/ibmvscsi/ibmvfc.c @@ -2767,6 +2767,40 @@ static void ibmvfc_retry_tgt_init(struct ibmvfc_target *tgt, ibmvfc_init_tgt(tgt, job_step); } +/* Defined in FC-LS */ +static const struct { + int code; + int retry; + int logged_in; +} prli_rsp [] = { + { 0, 1, 0 }, + { 1, 0, 1 }, + { 2, 1, 0 }, + { 3, 1, 0 }, + { 4, 0, 0 }, + { 5, 0, 0 }, + { 6, 0, 1 }, + { 7, 0, 0 }, + { 8, 1, 0 }, +}; + +/** + * ibmvfc_get_prli_rsp - Find PRLI response index + * @flags: PRLI response flags + * + **/ +static int ibmvfc_get_prli_rsp(u16 flags) +{ + int i; + int code = (flags & 0x0f00) >> 8; + + for (i = 0; i < ARRAY_SIZE(prli_rsp); i++) + if (prli_rsp[i].code == code) + return i; + + return 0; +} + /** * ibmvfc_tgt_prli_done - Completion handler for Process Login * @evt: ibmvfc event struct @@ -2777,15 +2811,36 @@ static void ibmvfc_tgt_prli_done(struct ibmvfc_event *evt) struct ibmvfc_target *tgt = evt->tgt; struct ibmvfc_host *vhost = evt->vhost; struct ibmvfc_process_login *rsp = &evt->xfer_iu->prli; + struct ibmvfc_prli_svc_parms *parms = &rsp->parms; u32 status = rsp->common.status; + int index; vhost->discovery_threads--; ibmvfc_set_tgt_action(tgt, IBMVFC_TGT_ACTION_NONE); switch (status) { case IBMVFC_MAD_SUCCESS: - tgt_dbg(tgt, "Process Login succeeded\n"); - tgt->need_login = 0; - ibmvfc_set_tgt_action(tgt, IBMVFC_TGT_ACTION_ADD_RPORT); + tgt_dbg(tgt, "Process Login succeeded: %X %02X %04X\n", + parms->type, parms->flags, parms->service_parms); + + if (parms->type == IBMVFC_SCSI_FCP_TYPE) { + index = ibmvfc_get_prli_rsp(parms->flags); + if (prli_rsp[index].logged_in) { + if (parms->flags & IBMVFC_PRLI_EST_IMG_PAIR) { + tgt->need_login = 0; + tgt->ids.roles = 0; + if (parms->service_parms & IBMVFC_PRLI_TARGET_FUNC) + tgt->ids.roles |= FC_PORT_ROLE_FCP_TARGET; + if (parms->service_parms & IBMVFC_PRLI_INITIATOR_FUNC) + tgt->ids.roles |= FC_PORT_ROLE_FCP_INITIATOR; + ibmvfc_set_tgt_action(tgt, IBMVFC_TGT_ACTION_ADD_RPORT); + } else + ibmvfc_set_tgt_action(tgt, IBMVFC_TGT_ACTION_DEL_RPORT); + } else if (prli_rsp[index].retry) + ibmvfc_retry_tgt_init(tgt, ibmvfc_tgt_send_prli); + else + ibmvfc_set_tgt_action(tgt, IBMVFC_TGT_ACTION_DEL_RPORT); + } else + ibmvfc_set_tgt_action(tgt, IBMVFC_TGT_ACTION_DEL_RPORT); break; case IBMVFC_MAD_DRIVER_FAILED: break; @@ -2874,7 +2929,6 @@ static void ibmvfc_tgt_plogi_done(struct ibmvfc_event *evt) tgt->ids.node_name = wwn_to_u64(rsp->service_parms.node_name); tgt->ids.port_name = wwn_to_u64(rsp->service_parms.port_name); tgt->ids.port_id = tgt->scsi_id; - tgt->ids.roles = FC_PORT_ROLE_FCP_TARGET; memcpy(&tgt->service_parms, &rsp->service_parms, sizeof(tgt->service_parms)); memcpy(&tgt->service_parms_change, &rsp->service_parms_change, -- cgit v0.10.2 From c96952ed7031e7c576ecf90cf95b8ec099d5295a Mon Sep 17 00:00:00 2001 From: FUJITA Tomonori Date: Wed, 4 Feb 2009 11:36:27 +0900 Subject: [SCSI] sg: avoid blk_put_request/blk_rq_unmap_user in interrupt This fixes the following oops: http://marc.info/?l=linux-kernel&m=123316111415677&w=2 You can reproduce this bug by interrupting a program before a sg response completes. This leads to the special sg state (the orphan state), then sg calls blk_put_request in interrupt (rq->end_io). The above bug report shows the recursive lock problem because sg calls blk_put_request in interrupt. We could call __blk_put_request here instead however we also need to handle blk_rq_unmap_user here, which can't be called in interrupt too. In the orphan state, we don't need to care about the data transfer (the program revoked the command) so adding 'just free the resource' mode to blk_rq_unmap_user is a possible option. I prefer to avoid complicating the blk mapping API when possible. I change the orphan state to call sg_finish_rem_req via execute_in_process_context. We hold sg_fd->kref so sg_fd doesn't go away until keventd_wq finishes our work. copy_from_user/to_user fails so blk_rq_unmap_user just frees the resource without the data transfer. Signed-off-by: FUJITA Tomonori Acked-by: Douglas Gilbert Signed-off-by: James Bottomley diff --git a/drivers/scsi/sg.c b/drivers/scsi/sg.c index 18d079e..cdd83cf 100644 --- a/drivers/scsi/sg.c +++ b/drivers/scsi/sg.c @@ -138,6 +138,7 @@ typedef struct sg_request { /* SG_MAX_QUEUE requests outstanding per file */ volatile char done; /* 0->before bh, 1->before read, 2->read */ struct request *rq; struct bio *bio; + struct execute_work ew; } Sg_request; typedef struct sg_fd { /* holds the state of a file descriptor */ @@ -1234,6 +1235,15 @@ sg_mmap(struct file *filp, struct vm_area_struct *vma) return 0; } +static void sg_rq_end_io_usercontext(struct work_struct *work) +{ + struct sg_request *srp = container_of(work, struct sg_request, ew.work); + struct sg_fd *sfp = srp->parentfp; + + sg_finish_rem_req(srp); + kref_put(&sfp->f_ref, sg_remove_sfp); +} + /* * This function is a "bottom half" handler that is called by the mid * level when a command is completed (or has failed). @@ -1312,10 +1322,9 @@ static void sg_rq_end_io(struct request *rq, int uptodate) */ wake_up_interruptible(&sfp->read_wait); kill_fasync(&sfp->async_qp, SIGPOLL, POLL_IN); + kref_put(&sfp->f_ref, sg_remove_sfp); } else - sg_finish_rem_req(srp); /* call with srp->done == 0 */ - - kref_put(&sfp->f_ref, sg_remove_sfp); + execute_in_process_context(sg_rq_end_io_usercontext, &srp->ew); } static struct file_operations sg_fops = { -- cgit v0.10.2 From 97218a1499391b174ea95e05b7a40fbb73e79813 Mon Sep 17 00:00:00 2001 From: Boaz Harrosh Date: Sun, 8 Feb 2009 18:02:22 +0200 Subject: [SCSI] libosd: Fix NULL dereference BUG when target is not OSD conformant Very old OSC's Target had a BUG in the Get/Set attributes where it was looking in the wrong places for attribute lists length. If used with the open-osd initiator, the initiator would dereference a NULL pointer when retrieving system_information attributes. Checks are added that retrieval of each attribute is successful before accessing its value. Signed-off-by: Boaz Harrosh Signed-off-by: James Bottomley diff --git a/drivers/scsi/osd/osd_initiator.c b/drivers/scsi/osd/osd_initiator.c index 0bbbf27..552f58b 100644 --- a/drivers/scsi/osd/osd_initiator.c +++ b/drivers/scsi/osd/osd_initiator.c @@ -131,7 +131,7 @@ static int _osd_print_system_info(struct osd_dev *od, void *caps) pFirst = get_attrs[a++].val_ptr; OSD_INFO("OSD_ATTR_RI_PRODUCT_REVISION_LEVEL [%u]\n", - get_unaligned_be32(pFirst)); + pFirst ? get_unaligned_be32(pFirst) : ~0U); pFirst = get_attrs[a++].val_ptr; OSD_INFO("OSD_ATTR_RI_PRODUCT_SERIAL_NUMBER [%s]\n", @@ -143,15 +143,18 @@ static int _osd_print_system_info(struct osd_dev *od, void *caps) pFirst = get_attrs[a++].val_ptr; OSD_INFO("OSD_ATTR_RI_TOTAL_CAPACITY [0x%llx]\n", - _LLU(get_unaligned_be64(pFirst))); + pFirst ? _LLU(get_unaligned_be64(pFirst)) : ~0ULL); pFirst = get_attrs[a++].val_ptr; OSD_INFO("OSD_ATTR_RI_USED_CAPACITY [0x%llx]\n", - _LLU(get_unaligned_be64(pFirst))); + pFirst ? _LLU(get_unaligned_be64(pFirst)) : ~0ULL); pFirst = get_attrs[a++].val_ptr; OSD_INFO("OSD_ATTR_RI_NUMBER_OF_PARTITIONS [%llu]\n", - _LLU(get_unaligned_be64(pFirst))); + pFirst ? _LLU(get_unaligned_be64(pFirst)) : ~0ULL); + + if (a >= nelem) + goto out; /* FIXME: Where are the time utilities */ pFirst = get_attrs[a++].val_ptr; -- cgit v0.10.2 From f290f1970f01287eaaffc798a677594a57ebd65e Mon Sep 17 00:00:00 2001 From: James Bottomley Date: Sun, 8 Feb 2009 21:59:48 -0600 Subject: [SCSI] Make scsi.h independent of the rest of the scsi includes This allows it to compile and be used on the ps3 platform that wants to use the #define values in scsi.h without actually having CONFIG_SCSI set. Signed-off-by: James Bottomley diff --git a/block/cmd-filter.c b/block/cmd-filter.c index 504b275..572bbc2 100644 --- a/block/cmd-filter.c +++ b/block/cmd-filter.c @@ -22,6 +22,7 @@ #include #include #include +#include #include #include diff --git a/include/scsi/scsi.h b/include/scsi/scsi.h index 80d7f60..084478e 100644 --- a/include/scsi/scsi.h +++ b/include/scsi/scsi.h @@ -9,7 +9,8 @@ #define _SCSI_SCSI_H #include -#include + +struct scsi_cmnd; /* * The maximum number of SG segments that we will put inside a @@ -439,22 +440,6 @@ static inline int scsi_is_wlun(unsigned int lun) #define host_byte(result) (((result) >> 16) & 0xff) #define driver_byte(result) (((result) >> 24) & 0xff) -static inline void set_msg_byte(struct scsi_cmnd *cmd, char status) -{ - cmd->result |= status << 8; -} - -static inline void set_host_byte(struct scsi_cmnd *cmd, char status) -{ - cmd->result |= status << 16; -} - -static inline void set_driver_byte(struct scsi_cmnd *cmd, char status) -{ - cmd->result |= status << 24; -} - - #define sense_class(sense) (((sense) >> 4) & 0x7) #define sense_error(sense) ((sense) & 0xf) #define sense_valid(sense) ((sense) & 0x80); diff --git a/include/scsi/scsi_cmnd.h b/include/scsi/scsi_cmnd.h index 855bf95..43b50d3 100644 --- a/include/scsi/scsi_cmnd.h +++ b/include/scsi/scsi_cmnd.h @@ -291,4 +291,19 @@ static inline struct scsi_data_buffer *scsi_prot(struct scsi_cmnd *cmd) #define scsi_for_each_prot_sg(cmd, sg, nseg, __i) \ for_each_sg(scsi_prot_sglist(cmd), sg, nseg, __i) +static inline void set_msg_byte(struct scsi_cmnd *cmd, char status) +{ + cmd->result |= status << 8; +} + +static inline void set_host_byte(struct scsi_cmnd *cmd, char status) +{ + cmd->result |= status << 16; +} + +static inline void set_driver_byte(struct scsi_cmnd *cmd, char status) +{ + cmd->result |= status << 24; +} + #endif /* _SCSI_SCSI_CMND_H */ -- cgit v0.10.2 From aa6cd29b72a5d8e6e5c8f536bc48693824ebfe09 Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Wed, 4 Feb 2009 22:17:29 +0100 Subject: [SCSI] libfc: Correct use of ! and & !ep->esb_stat is either 1 or 0, and the rightmost bit of ESB_ST_COMPLETE is always 0, making the result of !ep->esb_stat & ESB_ST_COMPLETE always 0. Thus parentheses around the argument to ! seem needed. The semantic patch that makes this change is as follows: (http://www.emn.fr/x-info/coccinelle/) // @@ expression E; constant C; @@ ( !E & !C | - !E & C + !(E & C) ) // Signed-off-by: Julia Lawall Signed-off-by: James Bottomley diff --git a/drivers/scsi/libfc/fc_exch.c b/drivers/scsi/libfc/fc_exch.c index 505825b..8a0c5c2 100644 --- a/drivers/scsi/libfc/fc_exch.c +++ b/drivers/scsi/libfc/fc_exch.c @@ -281,7 +281,7 @@ static void fc_exch_release(struct fc_exch *ep) ep->destructor(&ep->seq, ep->arg); if (ep->lp->tt.exch_put) ep->lp->tt.exch_put(ep->lp, mp, ep->xid); - WARN_ON(!ep->esb_stat & ESB_ST_COMPLETE); + WARN_ON(!(ep->esb_stat & ESB_ST_COMPLETE)); mempool_free(ep, mp->ep_pool); } } -- cgit v0.10.2 From 2134bc72ddc04d412c0c2ce93a9c6f19de6cac35 Mon Sep 17 00:00:00 2001 From: FUJITA Tomonori Date: Thu, 12 Feb 2009 02:42:56 +0900 Subject: [SCSI] sg: remove unnecessary function declarations Signed-off-by: FUJITA Tomonori Acked-by: Douglas Gilbert Signed-off-by: James Bottomley diff --git a/drivers/scsi/sg.c b/drivers/scsi/sg.c index cdd83cf..f493d7f 100644 --- a/drivers/scsi/sg.c +++ b/drivers/scsi/sg.c @@ -101,7 +101,6 @@ static int scatter_elem_sz_prev = SG_SCATTER_SZ; #define SG_SECTOR_MSK (SG_SECTOR_SZ - 1) static int sg_add(struct device *, struct class_interface *); -static void sg_device_destroy(struct kref *kref); static void sg_remove(struct device *, struct class_interface *); static DEFINE_IDR(sg_index_idr); @@ -178,14 +177,11 @@ typedef struct sg_device { /* holds the state of each scsi generic device */ struct kref d_ref; } Sg_device; -static int sg_fasync(int fd, struct file *filp, int mode); /* tasklet or soft irq callback */ static void sg_rq_end_io(struct request *rq, int uptodate); static int sg_start_req(Sg_request *srp, unsigned char *cmd); static void sg_finish_rem_req(Sg_request * srp); static int sg_build_indirect(Sg_scatter_hold * schp, Sg_fd * sfp, int buff_size); -static int sg_build_sgat(Sg_scatter_hold * schp, const Sg_fd * sfp, - int tablesize); static ssize_t sg_new_read(Sg_fd * sfp, char __user *buf, size_t count, Sg_request * srp); static ssize_t sg_new_write(Sg_fd *sfp, struct file *file, @@ -204,12 +200,8 @@ static Sg_request *sg_get_rq_mark(Sg_fd * sfp, int pack_id); static Sg_request *sg_add_request(Sg_fd * sfp); static int sg_remove_request(Sg_fd * sfp, Sg_request * srp); static int sg_res_in_use(Sg_fd * sfp); -static Sg_device *sg_lookup_dev(int dev); static Sg_device *sg_get_dev(int dev); static void sg_put_dev(Sg_device *sdp); -#ifdef CONFIG_SCSI_PROC_FS -static int sg_last_dev(void); -#endif #define SZ_SG_HEADER sizeof(struct sg_header) #define SZ_SG_IO_HDR sizeof(sg_io_hdr_t) -- cgit v0.10.2 From b2ed6c69aa3c1a3f496e2a72f770d53069371df3 Mon Sep 17 00:00:00 2001 From: FUJITA Tomonori Date: Thu, 12 Feb 2009 02:42:57 +0900 Subject: [SCSI] sg: use ALIGN macro This changes sg_build_indirect() to use ALIGN macro instead of calculating by hand. Signed-off-by: FUJITA Tomonori Acked-by: Douglas Gilbert Signed-off-by: James Bottomley diff --git a/drivers/scsi/sg.c b/drivers/scsi/sg.c index f493d7f..d45ac4a 100644 --- a/drivers/scsi/sg.c +++ b/drivers/scsi/sg.c @@ -98,7 +98,6 @@ static int scatter_elem_sz = SG_SCATTER_SZ; static int scatter_elem_sz_prev = SG_SCATTER_SZ; #define SG_SECTOR_SZ 512 -#define SG_SECTOR_MSK (SG_SECTOR_SZ - 1) static int sg_add(struct device *, struct class_interface *); static void sg_remove(struct device *, struct class_interface *); @@ -1723,8 +1722,8 @@ sg_build_indirect(Sg_scatter_hold * schp, Sg_fd * sfp, int buff_size) return -EFAULT; if (0 == blk_size) ++blk_size; /* don't know why */ -/* round request up to next highest SG_SECTOR_SZ byte boundary */ - blk_size = (blk_size + SG_SECTOR_MSK) & (~SG_SECTOR_MSK); + /* round request up to next highest SG_SECTOR_SZ byte boundary */ + blk_size = ALIGN(blk_size, SG_SECTOR_SZ); SCSI_LOG_TIMEOUT(4, printk("sg_build_indirect: buff_size=%d, blk_size=%d\n", buff_size, blk_size)); -- cgit v0.10.2 From 3442f802a8169a0c18d411d95f0e71b9205ed607 Mon Sep 17 00:00:00 2001 From: FUJITA Tomonori Date: Mon, 16 Feb 2009 13:26:53 +0900 Subject: [SCSI] sg: remove the own list management for struct sg_fd This replaces the own list management for struct sg_fd with the standard list_head structure. Signed-off-by: FUJITA Tomonori Acked-by: Douglas Gilbert Signed-off-by: James Bottomley diff --git a/drivers/scsi/sg.c b/drivers/scsi/sg.c index d45ac4a..7bf54c9 100644 --- a/drivers/scsi/sg.c +++ b/drivers/scsi/sg.c @@ -140,7 +140,7 @@ typedef struct sg_request { /* SG_MAX_QUEUE requests outstanding per file */ } Sg_request; typedef struct sg_fd { /* holds the state of a file descriptor */ - struct sg_fd *nextfp; /* NULL when last opened fd on this device */ + struct list_head sfd_siblings; struct sg_device *parentdp; /* owning device */ wait_queue_head_t read_wait; /* queue read until command done */ rwlock_t rq_list_lock; /* protect access to list in req_arr */ @@ -167,7 +167,7 @@ typedef struct sg_device { /* holds the state of each scsi generic device */ wait_queue_head_t o_excl_wait; /* queue open() when O_EXCL in use */ int sg_tablesize; /* adapter's max scatter-gather table size */ u32 index; /* device index number */ - Sg_fd *headfp; /* first open fd belonging to this device */ + struct list_head sfds; volatile char detached; /* 0->attached, 1->detached pending removal */ volatile char exclude; /* opened for exclusive access */ char sgdebug; /* 0->off, 1->sense, 9->dump dev, 10-> all devs */ @@ -258,13 +258,13 @@ sg_open(struct inode *inode, struct file *filp) retval = -EPERM; /* Can't lock it with read only access */ goto error_out; } - if (sdp->headfp && (flags & O_NONBLOCK)) { + if (!list_empty(&sdp->sfds) && (flags & O_NONBLOCK)) { retval = -EBUSY; goto error_out; } res = 0; __wait_event_interruptible(sdp->o_excl_wait, - ((sdp->headfp || sdp->exclude) ? 0 : (sdp->exclude = 1)), res); + ((!list_empty(&sdp->sfds) || sdp->exclude) ? 0 : (sdp->exclude = 1)), res); if (res) { retval = res; /* -ERESTARTSYS because signal hit process */ goto error_out; @@ -286,7 +286,7 @@ sg_open(struct inode *inode, struct file *filp) retval = -ENODEV; goto error_out; } - if (!sdp->headfp) { /* no existing opens on this device */ + if (list_empty(&sdp->sfds)) { /* no existing opens on this device */ sdp->sgdebug = 0; q = sdp->device->request_queue; sdp->sg_tablesize = min(q->max_hw_segments, @@ -1375,6 +1375,7 @@ static Sg_device *sg_alloc(struct gendisk *disk, struct scsi_device *scsidp) disk->first_minor = k; sdp->disk = disk; sdp->device = scsidp; + INIT_LIST_HEAD(&sdp->sfds); init_waitqueue_head(&sdp->o_excl_wait); sdp->sg_tablesize = min(q->max_hw_segments, q->max_phys_segments); sdp->index = k; @@ -1517,7 +1518,7 @@ static void sg_remove(struct device *cl_dev, struct class_interface *cl_intf) /* Need a write lock to set sdp->detached. */ write_lock_irqsave(&sg_index_lock, iflags); sdp->detached = 1; - for (sfp = sdp->headfp; sfp; sfp = sfp->nextfp) { + list_for_each_entry(sfp, &sdp->sfds, sfd_siblings) { wake_up_interruptible(&sfp->read_wait); kill_fasync(&sfp->async_qp, SIGPOLL, POLL_HUP); } @@ -2024,14 +2025,7 @@ sg_add_sfp(Sg_device * sdp, int dev) sfp->keep_orphan = SG_DEF_KEEP_ORPHAN; sfp->parentdp = sdp; write_lock_irqsave(&sg_index_lock, iflags); - if (!sdp->headfp) - sdp->headfp = sfp; - else { /* add to tail of existing list */ - Sg_fd *pfp = sdp->headfp; - while (pfp->nextfp) - pfp = pfp->nextfp; - pfp->nextfp = sfp; - } + list_add_tail(&sfp->sfd_siblings, &sdp->sfds); write_unlock_irqrestore(&sg_index_lock, iflags); SCSI_LOG_TIMEOUT(3, printk("sg_add_sfp: sfp=0x%p\n", sfp)); if (unlikely(sg_big_buff != def_reserved_size)) @@ -2080,28 +2074,10 @@ static void sg_remove_sfp(struct kref *kref) { struct sg_fd *sfp = container_of(kref, struct sg_fd, f_ref); struct sg_device *sdp = sfp->parentdp; - Sg_fd *fp; - Sg_fd *prev_fp; unsigned long iflags; - /* CAUTION! Note that sfp can still be found by walking sdp->headfp - * even though the refcount is now 0. Therefore, unlink sfp from - * sdp->headfp BEFORE doing any other cleanup. - */ - write_lock_irqsave(&sg_index_lock, iflags); - prev_fp = sdp->headfp; - if (sfp == prev_fp) - sdp->headfp = prev_fp->nextfp; - else { - while ((fp = prev_fp->nextfp)) { - if (sfp == fp) { - prev_fp->nextfp = fp->nextfp; - break; - } - prev_fp = fp; - } - } + list_del(&sfp->sfd_siblings); write_unlock_irqrestore(&sg_index_lock, iflags); wake_up_interruptible(&sdp->o_excl_wait); @@ -2486,10 +2462,12 @@ static void sg_proc_debug_helper(struct seq_file *s, Sg_device * sdp) const char * cp; unsigned int ms; - for (k = 0, fp = sdp->headfp; fp != NULL; ++k, fp = fp->nextfp) { + k = 0; + list_for_each_entry(fp, &sdp->sfds, sfd_siblings) { + k++; read_lock(&fp->rq_list_lock); /* irqs already disabled */ seq_printf(s, " FD(%d): timeout=%dms bufflen=%d " - "(res)sgat=%d low_dma=%d\n", k + 1, + "(res)sgat=%d low_dma=%d\n", k, jiffies_to_msecs(fp->timeout), fp->reserve.bufflen, (int) fp->reserve.k_use_sg, @@ -2559,7 +2537,7 @@ static int sg_proc_seq_show_debug(struct seq_file *s, void *v) read_lock_irqsave(&sg_index_lock, iflags); sdp = it ? sg_lookup_dev(it->index) : NULL; - if (sdp && sdp->headfp) { + if (sdp && !list_empty(&sdp->sfds)) { struct scsi_device *scsidp = sdp->device; seq_printf(s, " >>> device=%s ", sdp->disk->disk_name); -- cgit v0.10.2 From b3f1f9aa082b2ab86dec4db3d8b1566af345387e Mon Sep 17 00:00:00 2001 From: Roel Kluin Date: Tue, 17 Feb 2009 16:59:24 +0100 Subject: [SCSI] ses: code_set == 1 is tested twice Signed-off-by: Roel Kluin Signed-off-by: James Bottomley diff --git a/drivers/scsi/ses.c b/drivers/scsi/ses.c index f2cf952..c9146d7 100644 --- a/drivers/scsi/ses.c +++ b/drivers/scsi/ses.c @@ -370,7 +370,7 @@ static void ses_match_to_enclosure(struct enclosure_device *edev, u8 type = desc[1] & 0x0f; u8 len = desc[3]; - if (piv && code_set == 1 && assoc == 1 && code_set == 1 + if (piv && code_set == 1 && assoc == 1 && proto == SCSI_PROTOCOL_SAS && type == 3 && len == 8) efd.addr = (u64)desc[4] << 56 | (u64)desc[5] << 48 | -- cgit v0.10.2 From 5c211caa9f341f9eefbda89436d1440d1eccb3bc Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Wed, 18 Feb 2009 10:54:44 -0500 Subject: [SCSI] sd: tell the user when a disk's capacity is adjusted This patch (as1188) combines the tests for decrementing a drive's reported capacity and expands the comment. It also adds an informational message to the system log, informing the user when the reported value has been changed. Signed-off-by: Alan Stern Signed-off-by: James Bottomley diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c index 4970ae4..e744ee4 100644 --- a/drivers/scsi/sd.c +++ b/drivers/scsi/sd.c @@ -1383,18 +1383,22 @@ repeat: sd_read_protection_type(sdkp, buffer); } - /* Some devices return the total number of sectors, not the - * highest sector number. Make the necessary adjustment. */ - if (sdp->fix_capacity) { + /* Some devices are known to return the total number of blocks, + * not the highest block number. Some devices have versions + * which do this and others which do not. Some devices we might + * suspect of doing this but we don't know for certain. + * + * If we know the reported capacity is wrong, decrement it. If + * we can only guess, then assume the number of blocks is even + * (usually true but not always) and err on the side of lowering + * the capacity. + */ + if (sdp->fix_capacity || + (sdp->guess_capacity && (sdkp->capacity & 0x01))) { + sd_printk(KERN_INFO, sdkp, "Adjusting the sector count " + "from its reported value: %llu\n", + (unsigned long long) sdkp->capacity); --sdkp->capacity; - - /* Some devices have version which report the correct sizes - * and others which do not. We guess size according to a heuristic - * and err on the side of lowering the capacity. */ - } else { - if (sdp->guess_capacity) - if (sdkp->capacity & 0x01) /* odd sizes are odd */ - --sdkp->capacity; } got_data: -- cgit v0.10.2 From 2cf22be045ee1b29f9ce5cf4f4552811bb24916a Mon Sep 17 00:00:00 2001 From: Wayne Boyer Date: Tue, 24 Feb 2009 11:36:00 -0800 Subject: [SCSI] ipr: Expose debug and fastfail parameters Expose the debug and fastfail parameters to /sys/module/ipr/parameters such that they can be enabled/disabled at run time. Signed-off-by: Wayne Boyer Acked-by: Brian King Signed-off-by: James Bottomley diff --git a/drivers/scsi/ipr.c b/drivers/scsi/ipr.c index 9d54c20..def473f 100644 --- a/drivers/scsi/ipr.c +++ b/drivers/scsi/ipr.c @@ -152,13 +152,13 @@ module_param_named(log_level, ipr_log_level, uint, 0); MODULE_PARM_DESC(log_level, "Set to 0 - 4 for increasing verbosity of device driver"); module_param_named(testmode, ipr_testmode, int, 0); MODULE_PARM_DESC(testmode, "DANGEROUS!!! Allows unsupported configurations"); -module_param_named(fastfail, ipr_fastfail, int, 0); +module_param_named(fastfail, ipr_fastfail, int, S_IRUGO | S_IWUSR); MODULE_PARM_DESC(fastfail, "Reduce timeouts and retries"); module_param_named(transop_timeout, ipr_transop_timeout, int, 0); MODULE_PARM_DESC(transop_timeout, "Time in seconds to wait for adapter to come operational (default: 300)"); module_param_named(enable_cache, ipr_enable_cache, int, 0); MODULE_PARM_DESC(enable_cache, "Enable adapter's non-volatile write cache (default: 1)"); -module_param_named(debug, ipr_debug, int, 0); +module_param_named(debug, ipr_debug, int, S_IRUGO | S_IWUSR); MODULE_PARM_DESC(debug, "Enable device driver debugging logging. Set to 1 to enable. (default: 0)"); module_param_named(dual_ioa_raid, ipr_dual_ioa_raid, int, 0); MODULE_PARM_DESC(dual_ioa_raid, "Enable dual adapter RAID support. Set to 1 to enable. (default: 1)"); -- cgit v0.10.2 From d3ce65d12668ef1e3a164d48e04c59228d5ecf7b Mon Sep 17 00:00:00 2001 From: Tony Battersby Date: Thu, 8 Jan 2009 12:52:32 -0500 Subject: [SCSI] sym53c8xx: fix shost use-after-free and memory leak This patch fixes two bugs: 1) rmmod sym53c8xx uses shost after freeing it with scsi_put_host(shost). 2) insmod sym53c8xx doesn't call scsi_put_host(shost) if scsi_add_host() fails, causing a memory leak on the error path. Signed-off-by: Tony Battersby Signed-off-by: James Bottomley diff --git a/drivers/scsi/sym53c8xx_2/sym_glue.c b/drivers/scsi/sym53c8xx_2/sym_glue.c index f4e6cde..ff5be95 100644 --- a/drivers/scsi/sym53c8xx_2/sym_glue.c +++ b/drivers/scsi/sym53c8xx_2/sym_glue.c @@ -1660,6 +1660,7 @@ static int sym_detach(struct Scsi_Host *shost, struct pci_dev *pdev) OUTB(np, nc_istat, 0); sym_free_resources(np, pdev); + scsi_host_put(shost); return 1; } @@ -1749,7 +1750,6 @@ static void sym2_remove(struct pci_dev *pdev) struct Scsi_Host *shost = pci_get_drvdata(pdev); scsi_remove_host(shost); - scsi_host_put(shost); sym_detach(shost, pdev); pci_release_regions(pdev); pci_disable_device(pdev); -- cgit v0.10.2 From 07b9d81e849f64b990e943de6ad75b63dafe5a4b Mon Sep 17 00:00:00 2001 From: Tony Battersby Date: Thu, 8 Jan 2009 12:53:37 -0500 Subject: [SCSI] sym53c8xx: fix NULL deref on error path If sym_attach() fails to allocate np, the error path will dereference a NULL pointer for printk. Signed-off-by: Tony Battersby Signed-off-by: James Bottomley diff --git a/drivers/scsi/sym53c8xx_2/sym_glue.c b/drivers/scsi/sym53c8xx_2/sym_glue.c index ff5be95..cef03e7 100644 --- a/drivers/scsi/sym53c8xx_2/sym_glue.c +++ b/drivers/scsi/sym53c8xx_2/sym_glue.c @@ -1418,7 +1418,7 @@ static struct Scsi_Host * __devinit sym_attach(struct scsi_host_template *tpnt, attach_failed: if (!shost) return NULL; - printf_info("%s: giving up ...\n", sym_name(np)); + printf_info("sym%d: giving up ...\n", unit); if (np) sym_free_resources(np, pdev); scsi_host_put(shost); -- cgit v0.10.2 From b409063a9b7a56c0d658feaffedeb74ad71edce7 Mon Sep 17 00:00:00 2001 From: Tony Battersby Date: Thu, 8 Jan 2009 12:54:45 -0500 Subject: [SCSI] sym53c8xx: fix bogus free_irq() on error path If sym_attach() gets an error at or before request_irq(), then sym_free_resources() will call free_irq() for an unregistered interrupt handler. Signed-off-by: Tony Battersby Signed-off-by: James Bottomley diff --git a/drivers/scsi/sym53c8xx_2/sym_glue.c b/drivers/scsi/sym53c8xx_2/sym_glue.c index cef03e7..a8ac60c 100644 --- a/drivers/scsi/sym53c8xx_2/sym_glue.c +++ b/drivers/scsi/sym53c8xx_2/sym_glue.c @@ -1238,12 +1238,13 @@ static int sym53c8xx_proc_info(struct Scsi_Host *shost, char *buffer, /* * Free controller resources. */ -static void sym_free_resources(struct sym_hcb *np, struct pci_dev *pdev) +static void sym_free_resources(struct sym_hcb *np, struct pci_dev *pdev, + int do_free_irq) { /* * Free O/S specific resources. */ - if (pdev->irq) + if (do_free_irq) free_irq(pdev->irq, np->s.host); if (np->s.ioaddr) pci_iounmap(pdev, np->s.ioaddr); @@ -1275,6 +1276,7 @@ static struct Scsi_Host * __devinit sym_attach(struct scsi_host_template *tpnt, struct pci_dev *pdev = dev->pdev; unsigned long flags; struct sym_fw *fw; + int do_free_irq = 0; printk(KERN_INFO "sym%d: <%s> rev 0x%x at pci %s irq %u\n", unit, dev->chip.name, pdev->revision, pci_name(pdev), @@ -1364,6 +1366,7 @@ static struct Scsi_Host * __devinit sym_attach(struct scsi_host_template *tpnt, sym_name(np), pdev->irq); goto attach_failed; } + do_free_irq = 1; /* * After SCSI devices have been opened, we cannot @@ -1420,7 +1423,7 @@ static struct Scsi_Host * __devinit sym_attach(struct scsi_host_template *tpnt, return NULL; printf_info("sym%d: giving up ...\n", unit); if (np) - sym_free_resources(np, pdev); + sym_free_resources(np, pdev, do_free_irq); scsi_host_put(shost); return NULL; @@ -1659,7 +1662,7 @@ static int sym_detach(struct Scsi_Host *shost, struct pci_dev *pdev) udelay(10); OUTB(np, nc_istat, 0); - sym_free_resources(np, pdev); + sym_free_resources(np, pdev, 1); scsi_host_put(shost); return 1; -- cgit v0.10.2 From a71d035de835caa7d14ef69928e0fde9fc241cc0 Mon Sep 17 00:00:00 2001 From: Tony Battersby Date: Thu, 8 Jan 2009 12:55:52 -0500 Subject: [SCSI] sym53c8xx: unmap pci memory after probe errors During sym2_probe(), sym_init_device() does pci_iomap(), but there is no corresponding pci_iounmap() if an error occurs before sym_attach() copies sym_device::s.{ioaddr,ramaddr} to np. 1) Add the sym_iounmap_device() function. 2) Call sym_iounmap_device() if an error occurs between sym_init_device() and the time sym_attach() allocates np. 3) Make sym_attach() copy sym_device::s.{ioaddr,ramaddr} to np before calling any function that can fail so that sym_free_resources() will do the unmap instead of sym_iounmap_device(). Also fixed by this patch: During sym2_probe(), if sym_check_raid() returns nonzero, then pci_release_regions() is never called. Signed-off-by: Tony Battersby Signed-off-by: James Bottomley diff --git a/drivers/scsi/sym53c8xx_2/sym_glue.c b/drivers/scsi/sym53c8xx_2/sym_glue.c index a8ac60c..8e69b5c 100644 --- a/drivers/scsi/sym53c8xx_2/sym_glue.c +++ b/drivers/scsi/sym53c8xx_2/sym_glue.c @@ -1236,6 +1236,20 @@ static int sym53c8xx_proc_info(struct Scsi_Host *shost, char *buffer, #endif /* SYM_LINUX_PROC_INFO_SUPPORT */ /* + * Free resources claimed by sym_init_device(). Note that + * sym_free_resources() should be used instead of this function after calling + * sym_attach(). + */ +static void __devinit +sym_iounmap_device(struct sym_device *device) +{ + if (device->s.ioaddr) + pci_iounmap(device->pdev, device->s.ioaddr); + if (device->s.ramaddr) + pci_iounmap(device->pdev, device->s.ramaddr); +} + +/* * Free controller resources. */ static void sym_free_resources(struct sym_hcb *np, struct pci_dev *pdev, @@ -1272,7 +1286,7 @@ static struct Scsi_Host * __devinit sym_attach(struct scsi_host_template *tpnt, { struct sym_data *sym_data; struct sym_hcb *np = NULL; - struct Scsi_Host *shost; + struct Scsi_Host *shost = NULL; struct pci_dev *pdev = dev->pdev; unsigned long flags; struct sym_fw *fw; @@ -1287,11 +1301,11 @@ static struct Scsi_Host * __devinit sym_attach(struct scsi_host_template *tpnt, */ fw = sym_find_firmware(&dev->chip); if (!fw) - return NULL; + goto attach_failed; shost = scsi_host_alloc(tpnt, sizeof(*sym_data)); if (!shost) - return NULL; + goto attach_failed; sym_data = shost_priv(shost); /* @@ -1321,6 +1335,13 @@ static struct Scsi_Host * __devinit sym_attach(struct scsi_host_template *tpnt, np->maxoffs = dev->chip.offset_max; np->maxburst = dev->chip.burst_max; np->myaddr = dev->host_id; + np->mmio_ba = (u32)dev->mmio_base; + np->s.ioaddr = dev->s.ioaddr; + np->s.ramaddr = dev->s.ramaddr; + if (!(np->features & FE_RAM)) + dev->ram_base = 0; + if (dev->ram_base) + np->ram_ba = (u32)dev->ram_base; /* * Edit its name. @@ -1336,22 +1357,6 @@ static struct Scsi_Host * __devinit sym_attach(struct scsi_host_template *tpnt, goto attach_failed; } - /* - * Try to map the controller chip to - * virtual and physical memory. - */ - np->mmio_ba = (u32)dev->mmio_base; - np->s.ioaddr = dev->s.ioaddr; - np->s.ramaddr = dev->s.ramaddr; - - /* - * Map on-chip RAM if present and supported. - */ - if (!(np->features & FE_RAM)) - dev->ram_base = 0; - if (dev->ram_base) - np->ram_ba = (u32)dev->ram_base; - if (sym_hcb_attach(shost, fw, dev->nvram)) goto attach_failed; @@ -1419,12 +1424,13 @@ static struct Scsi_Host * __devinit sym_attach(struct scsi_host_template *tpnt, "TERMINATION, DEVICE POWER etc.!\n", sym_name(np)); spin_unlock_irqrestore(shost->host_lock, flags); attach_failed: - if (!shost) - return NULL; printf_info("sym%d: giving up ...\n", unit); if (np) sym_free_resources(np, pdev, do_free_irq); - scsi_host_put(shost); + else + sym_iounmap_device(dev); + if (shost) + scsi_host_put(shost); return NULL; } @@ -1700,6 +1706,8 @@ static int __devinit sym2_probe(struct pci_dev *pdev, struct sym_device sym_dev; struct sym_nvram nvram; struct Scsi_Host *shost; + int do_iounmap = 0; + int do_disable_device = 1; memset(&sym_dev, 0, sizeof(sym_dev)); memset(&nvram, 0, sizeof(nvram)); @@ -1713,11 +1721,15 @@ static int __devinit sym2_probe(struct pci_dev *pdev, goto disable; sym_init_device(pdev, &sym_dev); + do_iounmap = 1; + if (sym_check_supported(&sym_dev)) goto free; - if (sym_check_raid(&sym_dev)) - goto leave; /* Don't disable the device */ + if (sym_check_raid(&sym_dev)) { + do_disable_device = 0; /* Don't disable the device */ + goto free; + } if (sym_set_workarounds(&sym_dev)) goto free; @@ -1726,6 +1738,7 @@ static int __devinit sym2_probe(struct pci_dev *pdev, sym_get_nvram(&sym_dev, &nvram); + do_iounmap = 0; /* Don't sym_iounmap_device() after sym_attach(). */ shost = sym_attach(&sym2_template, attach_count, &sym_dev); if (!shost) goto free; @@ -1741,9 +1754,12 @@ static int __devinit sym2_probe(struct pci_dev *pdev, detach: sym_detach(pci_get_drvdata(pdev), pdev); free: + if (do_iounmap) + sym_iounmap_device(&sym_dev); pci_release_regions(pdev); disable: - pci_disable_device(pdev); + if (do_disable_device) + pci_disable_device(pdev); leave: return -ENODEV; } -- cgit v0.10.2 From 783fa7311b2c639f39c6163f9fbb05253fb2d702 Mon Sep 17 00:00:00 2001 From: Tony Battersby Date: Thu, 8 Jan 2009 12:56:58 -0500 Subject: [SCSI] sym53c8xx: handle pci_iomap() failures sym_init_device() doesn't check if pci_iomap() fails. It also tries to map device RAM without first checking FE_RAM. 1) Move some initialization from sym_init_device() to the top of sym2_probe(). 2) Rename sym_init_device() to sym_iomap_device(). 3) Call sym_iomap_device() after sym_check_supported() instead of before so that device->chip.features will be set. 4) Check FE_RAM in sym_iomap_device() before mapping RAM. 5) If sym_iomap_device() cannot map registers, then abort. 6) If sym_iomap_device() cannot map RAM, then fall back to not using RAM and continue. 7) Remove the check for FE_RAM in sym_attach() since dev->ram_base is now always set correctly. Signed-off-by: Tony Battersby Signed-off-by: James Bottomley diff --git a/drivers/scsi/sym53c8xx_2/sym_glue.c b/drivers/scsi/sym53c8xx_2/sym_glue.c index 8e69b5c..a0d5aa6 100644 --- a/drivers/scsi/sym53c8xx_2/sym_glue.c +++ b/drivers/scsi/sym53c8xx_2/sym_glue.c @@ -1236,7 +1236,7 @@ static int sym53c8xx_proc_info(struct Scsi_Host *shost, char *buffer, #endif /* SYM_LINUX_PROC_INFO_SUPPORT */ /* - * Free resources claimed by sym_init_device(). Note that + * Free resources claimed by sym_iomap_device(). Note that * sym_free_resources() should be used instead of this function after calling * sym_attach(). */ @@ -1336,12 +1336,9 @@ static struct Scsi_Host * __devinit sym_attach(struct scsi_host_template *tpnt, np->maxburst = dev->chip.burst_max; np->myaddr = dev->host_id; np->mmio_ba = (u32)dev->mmio_base; + np->ram_ba = (u32)dev->ram_base; np->s.ioaddr = dev->s.ioaddr; np->s.ramaddr = dev->s.ramaddr; - if (!(np->features & FE_RAM)) - dev->ram_base = 0; - if (dev->ram_base) - np->ram_ba = (u32)dev->ram_base; /* * Edit its name. @@ -1559,30 +1556,28 @@ static int __devinit sym_set_workarounds(struct sym_device *device) } /* - * Read and check the PCI configuration for any detected NCR - * boards and save data for attaching after all boards have - * been detected. + * Map HBA registers and on-chip SRAM (if present). */ -static void __devinit -sym_init_device(struct pci_dev *pdev, struct sym_device *device) +static int __devinit +sym_iomap_device(struct sym_device *device) { - int i = 2; + struct pci_dev *pdev = device->pdev; struct pci_bus_region bus_addr; - - device->host_id = SYM_SETUP_HOST_ID; - device->pdev = pdev; + int i = 2; pcibios_resource_to_bus(pdev, &bus_addr, &pdev->resource[1]); device->mmio_base = bus_addr.start; - /* - * If the BAR is 64-bit, resource 2 will be occupied by the - * upper 32 bits - */ - if (!pdev->resource[i].flags) - i++; - pcibios_resource_to_bus(pdev, &bus_addr, &pdev->resource[i]); - device->ram_base = bus_addr.start; + if (device->chip.features & FE_RAM) { + /* + * If the BAR is 64-bit, resource 2 will be occupied by the + * upper 32 bits + */ + if (!pdev->resource[i].flags) + i++; + pcibios_resource_to_bus(pdev, &bus_addr, &pdev->resource[i]); + device->ram_base = bus_addr.start; + } #ifdef CONFIG_SCSI_SYM53C8XX_MMIO if (device->mmio_base) @@ -1592,9 +1587,21 @@ sym_init_device(struct pci_dev *pdev, struct sym_device *device) if (!device->s.ioaddr) device->s.ioaddr = pci_iomap(pdev, 0, pci_resource_len(pdev, 0)); - if (device->ram_base) + if (!device->s.ioaddr) { + dev_err(&pdev->dev, "could not map registers; giving up.\n"); + return -EIO; + } + if (device->ram_base) { device->s.ramaddr = pci_iomap(pdev, i, pci_resource_len(pdev, i)); + if (!device->s.ramaddr) { + dev_warn(&pdev->dev, + "could not map SRAM; continuing anyway.\n"); + device->ram_base = 0; + } + } + + return 0; } /* @@ -1711,6 +1718,8 @@ static int __devinit sym2_probe(struct pci_dev *pdev, memset(&sym_dev, 0, sizeof(sym_dev)); memset(&nvram, 0, sizeof(nvram)); + sym_dev.pdev = pdev; + sym_dev.host_id = SYM_SETUP_HOST_ID; if (pci_enable_device(pdev)) goto leave; @@ -1720,12 +1729,13 @@ static int __devinit sym2_probe(struct pci_dev *pdev, if (pci_request_regions(pdev, NAME53C8XX)) goto disable; - sym_init_device(pdev, &sym_dev); - do_iounmap = 1; - if (sym_check_supported(&sym_dev)) goto free; + if (sym_iomap_device(&sym_dev)) + goto free; + do_iounmap = 1; + if (sym_check_raid(&sym_dev)) { do_disable_device = 0; /* Don't disable the device */ goto free; -- cgit v0.10.2 From c2fd206e08cd55e7ee0d865affc172eb5af01c16 Mon Sep 17 00:00:00 2001 From: Tony Battersby Date: Thu, 8 Jan 2009 12:58:04 -0500 Subject: [SCSI] sym53c8xx: use a queue depth of 1 for untagged devices sym53c8xx uses a command queue depth of 2 for untagged devices, without good reason. This _mostly_ seems to work ok, but it has caused me some subtle problems. For example, I have an application where one thread sends write commands to a tape drive, and another thread sends log sense polling commands. With a queue depth of 2, the polling commands end up being starved for long periods of time while multiple write commands are serviced (this may also be related to the fact the the sg driver queues commands in LIFO order). This problem is fixed by changing the queue depth to 1 for untagged devices. I have tested this change extensively with many different tape drives, medium changers, and disk drives (disk drives of course use tagged commands and are therefore unaffected by this patch). Signed-off-by: Tony Battersby Signed-off-by: James Bottomley diff --git a/drivers/scsi/sym53c8xx_2/sym_glue.c b/drivers/scsi/sym53c8xx_2/sym_glue.c index a0d5aa6..23e7820 100644 --- a/drivers/scsi/sym53c8xx_2/sym_glue.c +++ b/drivers/scsi/sym53c8xx_2/sym_glue.c @@ -792,9 +792,9 @@ static int sym53c8xx_slave_configure(struct scsi_device *sdev) /* * Select queue depth from driver setup. - * Donnot use more than configured by user. - * Use at least 2. - * Donnot use more than our maximum. + * Do not use more than configured by user. + * Use at least 1. + * Do not use more than our maximum. */ reqtags = sym_driver_setup.max_tag; if (reqtags > tp->usrtags) @@ -803,7 +803,7 @@ static int sym53c8xx_slave_configure(struct scsi_device *sdev) reqtags = 0; if (reqtags > SYM_CONF_MAX_TAG) reqtags = SYM_CONF_MAX_TAG; - depth_to_use = reqtags ? reqtags : 2; + depth_to_use = reqtags ? reqtags : 1; scsi_adjust_queue_depth(sdev, sdev->tagged_supported ? MSG_SIMPLE_TAG : 0, depth_to_use); -- cgit v0.10.2 From 058bb82c5628c88af802c19e2b56ae43551552d5 Mon Sep 17 00:00:00 2001 From: Tony Battersby Date: Thu, 8 Jan 2009 12:59:08 -0500 Subject: [SCSI] sym53c8xx: don't flood syslog with negotiation messages sym53c8xx prints a negotiation message after every check condition. This can add up to a lot of messages for removable-medium devices (CD-ROM, tape drives, etc.) that are being polled, since they return check condition when no medium is present. This patch suppresses the negotiation message if it would be the same as the last one printed. Signed-off-by: Tony Battersby Signed-off-by: James Bottomley diff --git a/drivers/scsi/sym53c8xx_2/sym_hipd.c b/drivers/scsi/sym53c8xx_2/sym_hipd.c index fe6359d..ccea7db 100644 --- a/drivers/scsi/sym53c8xx_2/sym_hipd.c +++ b/drivers/scsi/sym53c8xx_2/sym_hipd.c @@ -2039,6 +2039,29 @@ static void sym_settrans(struct sym_hcb *np, int target, u_char opts, u_char ofs } } +static void sym_announce_transfer_rate(struct sym_tcb *tp) +{ + struct scsi_target *starget = tp->starget; + + if (tp->tprint.period != spi_period(starget) || + tp->tprint.offset != spi_offset(starget) || + tp->tprint.width != spi_width(starget) || + tp->tprint.iu != spi_iu(starget) || + tp->tprint.dt != spi_dt(starget) || + tp->tprint.qas != spi_qas(starget) || + !tp->tprint.check_nego) { + tp->tprint.period = spi_period(starget); + tp->tprint.offset = spi_offset(starget); + tp->tprint.width = spi_width(starget); + tp->tprint.iu = spi_iu(starget); + tp->tprint.dt = spi_dt(starget); + tp->tprint.qas = spi_qas(starget); + tp->tprint.check_nego = 1; + + spi_display_xfer_agreement(starget); + } +} + /* * We received a WDTR. * Let everything be aware of the changes. @@ -2064,7 +2087,7 @@ static void sym_setwide(struct sym_hcb *np, int target, u_char wide) spi_qas(starget) = 0; if (sym_verbose >= 3) - spi_display_xfer_agreement(starget); + sym_announce_transfer_rate(tp); } /* @@ -2097,7 +2120,7 @@ sym_setsync(struct sym_hcb *np, int target, tp->tgoal.check_nego = 0; } - spi_display_xfer_agreement(starget); + sym_announce_transfer_rate(tp); } /* @@ -2125,7 +2148,7 @@ sym_setpprot(struct sym_hcb *np, int target, u_char opts, u_char ofs, spi_qas(starget) = tp->tgoal.qas = !!(opts & PPR_OPT_QAS); tp->tgoal.check_nego = 0; - spi_display_xfer_agreement(starget); + sym_announce_transfer_rate(tp); } /* diff --git a/drivers/scsi/sym53c8xx_2/sym_hipd.h b/drivers/scsi/sym53c8xx_2/sym_hipd.h index 233a3d0..61d28fc 100644 --- a/drivers/scsi/sym53c8xx_2/sym_hipd.h +++ b/drivers/scsi/sym53c8xx_2/sym_hipd.h @@ -420,6 +420,9 @@ struct sym_tcb { /* Transfer goal */ struct sym_trans tgoal; + /* Last printed transfer speed */ + struct sym_trans tprint; + /* * Keep track of the CCB used for the negotiation in order * to ensure that only 1 negotiation is queued at a time. -- cgit v0.10.2 From 77c019768f0607c36e25bec11ce3e1eabef09277 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Fri, 27 Feb 2009 16:51:42 -0500 Subject: [SCSI] fix /proc memory leak in the SCSI core The SCSI core calls scsi_proc_hostdir_add() from within scsi_host_alloc(), but the corresponding scsi_proc_hostdir_rm() routine is called from within scsi_remove_host(). As a result, if a host is allocated and then deallocated without ever being registered, the host's directory in /proc is leaked. This patch (as1181b) fixes this bug in the SCSI core by moving scsi_proc_hostdir_rm() into scsi_host_dev_release(). Signed-off-by: Alan Stern Signed-off-by: James Bottomley diff --git a/drivers/scsi/hosts.c b/drivers/scsi/hosts.c index aa670a1..89d41a4 100644 --- a/drivers/scsi/hosts.c +++ b/drivers/scsi/hosts.c @@ -176,7 +176,6 @@ void scsi_remove_host(struct Scsi_Host *shost) transport_unregister_device(&shost->shost_gendev); device_unregister(&shost->shost_dev); device_del(&shost->shost_gendev); - scsi_proc_hostdir_rm(shost->hostt); } EXPORT_SYMBOL(scsi_remove_host); @@ -270,6 +269,8 @@ static void scsi_host_dev_release(struct device *dev) struct Scsi_Host *shost = dev_to_shost(dev); struct device *parent = dev->parent; + scsi_proc_hostdir_rm(shost->hostt); + if (shost->ehandler) kthread_stop(shost->ehandler); if (shost->work_q) -- cgit v0.10.2 From a5b11dda12ed7e3a79180b10ad6209a40a02989f Mon Sep 17 00:00:00 2001 From: Christof Schmitt Date: Mon, 2 Mar 2009 13:08:54 +0100 Subject: [SCSI] zfcp: Remove some port flags PORT_PHYS_CLOSING is only set and cleared, but not actually used for status checking. PORT_INVALID_WWPN is set when the GID_PN request does not return a d_id for a remote port, e.g. when a remote port has been unplugged. For this case, the d_id is zero. In the erp we can check the d_id and use the normal escalation procedure that gives up after three retries and remove the special case. PORT_NO_WWPN is unused: Each port in the remote port list has a valid wwpn. The WKA ports are now tracked outside the port list. Remove the PORT_NO_WWPN flag, since this is no longer set for any port. Acked-by: Swen Schillig Signed-off-by: Christof Schmitt Signed-off-by: James Bottomley diff --git a/drivers/s390/scsi/zfcp_aux.c b/drivers/s390/scsi/zfcp_aux.c index 8af7dfb..497986f 100644 --- a/drivers/s390/scsi/zfcp_aux.c +++ b/drivers/s390/scsi/zfcp_aux.c @@ -249,8 +249,8 @@ struct zfcp_port *zfcp_get_port_by_wwpn(struct zfcp_adapter *adapter, struct zfcp_port *port; list_for_each_entry(port, &adapter->port_list_head, list) - if ((port->wwpn == wwpn) && !(atomic_read(&port->status) & - (ZFCP_STATUS_PORT_NO_WWPN | ZFCP_STATUS_COMMON_REMOVE))) + if ((port->wwpn == wwpn) && + !(atomic_read(&port->status) & ZFCP_STATUS_COMMON_REMOVE)) return port; return NULL; } @@ -620,11 +620,10 @@ struct zfcp_port *zfcp_port_enqueue(struct zfcp_adapter *adapter, u64 wwpn, dev_set_drvdata(&port->sysfs_device, port); read_lock_irq(&zfcp_data.config_lock); - if (!(status & ZFCP_STATUS_PORT_NO_WWPN)) - if (zfcp_get_port_by_wwpn(adapter, wwpn)) { - read_unlock_irq(&zfcp_data.config_lock); - goto err_out_free; - } + if (zfcp_get_port_by_wwpn(adapter, wwpn)) { + read_unlock_irq(&zfcp_data.config_lock); + goto err_out_free; + } read_unlock_irq(&zfcp_data.config_lock); if (device_register(&port->sysfs_device)) diff --git a/drivers/s390/scsi/zfcp_def.h b/drivers/s390/scsi/zfcp_def.h index 5106627..62f9ee5 100644 --- a/drivers/s390/scsi/zfcp_def.h +++ b/drivers/s390/scsi/zfcp_def.h @@ -243,9 +243,6 @@ struct zfcp_ls_adisc { /* remote port status */ #define ZFCP_STATUS_PORT_PHYS_OPEN 0x00000001 -#define ZFCP_STATUS_PORT_PHYS_CLOSING 0x00000004 -#define ZFCP_STATUS_PORT_NO_WWPN 0x00000008 -#define ZFCP_STATUS_PORT_INVALID_WWPN 0x00000020 /* well known address (WKA) port status*/ enum zfcp_wka_status { diff --git a/drivers/s390/scsi/zfcp_erp.c b/drivers/s390/scsi/zfcp_erp.c index 387a3af..aed08e7 100644 --- a/drivers/s390/scsi/zfcp_erp.c +++ b/drivers/s390/scsi/zfcp_erp.c @@ -777,10 +777,7 @@ static int zfcp_erp_port_forced_strategy_close(struct zfcp_erp_action *act) static void zfcp_erp_port_strategy_clearstati(struct zfcp_port *port) { - atomic_clear_mask(ZFCP_STATUS_COMMON_ACCESS_DENIED | - ZFCP_STATUS_PORT_PHYS_CLOSING | - ZFCP_STATUS_PORT_INVALID_WWPN, - &port->status); + atomic_clear_mask(ZFCP_STATUS_COMMON_ACCESS_DENIED, &port->status); } static int zfcp_erp_port_forced_strategy(struct zfcp_erp_action *erp_action) @@ -875,13 +872,8 @@ static int zfcp_erp_port_strategy_open_common(struct zfcp_erp_action *act) return ZFCP_ERP_CONTINUES; } case ZFCP_ERP_STEP_NAMESERVER_LOOKUP: - if (!port->d_id) { - if (p_status & (ZFCP_STATUS_PORT_INVALID_WWPN)) { - zfcp_erp_port_failed(port, 26, NULL); - return ZFCP_ERP_EXIT; - } + if (!port->d_id) return ZFCP_ERP_FAILED; - } return zfcp_erp_port_strategy_open_port(act); case ZFCP_ERP_STEP_PORT_OPENING: @@ -1269,10 +1261,6 @@ static void zfcp_erp_action_cleanup(struct zfcp_erp_action *act, int result) case ZFCP_ERP_ACTION_REOPEN_PORT_FORCED: case ZFCP_ERP_ACTION_REOPEN_PORT: - if (atomic_read(&port->status) & ZFCP_STATUS_PORT_NO_WWPN) { - zfcp_port_put(port); - return; - } if ((result == ZFCP_ERP_SUCCEEDED) && !port->rport) zfcp_erp_rport_register(port); if ((result != ZFCP_ERP_SUCCEEDED) && port->rport) { diff --git a/drivers/s390/scsi/zfcp_fc.c b/drivers/s390/scsi/zfcp_fc.c index eabdfe2..67e6b71 100644 --- a/drivers/s390/scsi/zfcp_fc.c +++ b/drivers/s390/scsi/zfcp_fc.c @@ -259,10 +259,9 @@ static void zfcp_fc_ns_gid_pn_eval(unsigned long data) if (ct->status) return; - if (ct_iu_resp->header.cmd_rsp_code != ZFCP_CT_ACCEPT) { - atomic_set_mask(ZFCP_STATUS_PORT_INVALID_WWPN, &port->status); + if (ct_iu_resp->header.cmd_rsp_code != ZFCP_CT_ACCEPT) return; - } + /* paranoia */ if (ct_iu_req->wwpn != port->wwpn) return; diff --git a/drivers/s390/scsi/zfcp_fsf.c b/drivers/s390/scsi/zfcp_fsf.c index babe1b8..638cd5a 100644 --- a/drivers/s390/scsi/zfcp_fsf.c +++ b/drivers/s390/scsi/zfcp_fsf.c @@ -1712,7 +1712,7 @@ static void zfcp_fsf_close_physical_port_handler(struct zfcp_fsf_req *req) struct zfcp_unit *unit; if (req->status & ZFCP_STATUS_FSFREQ_ERROR) - goto skip_fsfstatus; + return; switch (header->fsf_status) { case FSF_PORT_HANDLE_NOT_VALID: @@ -1752,8 +1752,6 @@ static void zfcp_fsf_close_physical_port_handler(struct zfcp_fsf_req *req) &unit->status); break; } -skip_fsfstatus: - atomic_clear_mask(ZFCP_STATUS_PORT_PHYS_CLOSING, &port->status); } /** @@ -1789,8 +1787,6 @@ int zfcp_fsf_close_physical_port(struct zfcp_erp_action *erp_action) req->erp_action = erp_action; req->handler = zfcp_fsf_close_physical_port_handler; erp_action->fsf_req = req; - atomic_set_mask(ZFCP_STATUS_PORT_PHYS_CLOSING, - &erp_action->port->status); zfcp_fsf_start_erp_timer(req); retval = zfcp_fsf_req_send(req); -- cgit v0.10.2 From 86f8a1b4b472e4b2b58df5826709d4797d84d46f Mon Sep 17 00:00:00 2001 From: Christof Schmitt Date: Mon, 2 Mar 2009 13:08:55 +0100 Subject: [SCSI] zfcp: Remove UNIT_REGISTERED status flag Use the device pointer in zfcp_unit for tracking if we have a registered SCSI device. With this approach, the flag ZFCP_STATUS_UNIT_REGISTERED is only redundant and can be removed. Acked-by: Swen Schillig Signed-off-by: Christof Schmitt Signed-off-by: James Bottomley diff --git a/drivers/s390/scsi/zfcp_ccw.c b/drivers/s390/scsi/zfcp_ccw.c index 285881f..683ac4e 100644 --- a/drivers/s390/scsi/zfcp_ccw.c +++ b/drivers/s390/scsi/zfcp_ccw.c @@ -72,8 +72,7 @@ static void zfcp_ccw_remove(struct ccw_device *ccw_device) list_for_each_entry_safe(port, p, &port_remove_lh, list) { list_for_each_entry_safe(unit, u, &unit_remove_lh, list) { - if (atomic_read(&unit->status) & - ZFCP_STATUS_UNIT_REGISTERED) + if (unit->device) scsi_remove_device(unit->device); zfcp_unit_dequeue(unit); } diff --git a/drivers/s390/scsi/zfcp_def.h b/drivers/s390/scsi/zfcp_def.h index 62f9ee5..56302a1 100644 --- a/drivers/s390/scsi/zfcp_def.h +++ b/drivers/s390/scsi/zfcp_def.h @@ -255,7 +255,6 @@ enum zfcp_wka_status { /* logical unit status */ #define ZFCP_STATUS_UNIT_SHARED 0x00000004 #define ZFCP_STATUS_UNIT_READONLY 0x00000008 -#define ZFCP_STATUS_UNIT_REGISTERED 0x00000010 #define ZFCP_STATUS_UNIT_SCSI_WORK_PENDING 0x00000020 /* FSF request status (this does not have a common part) */ diff --git a/drivers/s390/scsi/zfcp_erp.c b/drivers/s390/scsi/zfcp_erp.c index aed08e7..2a00f81 100644 --- a/drivers/s390/scsi/zfcp_erp.c +++ b/drivers/s390/scsi/zfcp_erp.c @@ -1250,8 +1250,6 @@ static void zfcp_erp_action_cleanup(struct zfcp_erp_action *act, int result) case ZFCP_ERP_ACTION_REOPEN_UNIT: if ((result == ZFCP_ERP_SUCCEEDED) && !unit->device && port->rport) { - atomic_set_mask(ZFCP_STATUS_UNIT_REGISTERED, - &unit->status); if (!(atomic_read(&unit->status) & ZFCP_STATUS_UNIT_SCSI_WORK_PENDING)) zfcp_erp_schedule_work(unit); diff --git a/drivers/s390/scsi/zfcp_scsi.c b/drivers/s390/scsi/zfcp_scsi.c index 9dc42a6..7829c72 100644 --- a/drivers/s390/scsi/zfcp_scsi.c +++ b/drivers/s390/scsi/zfcp_scsi.c @@ -27,7 +27,6 @@ char *zfcp_get_fcp_sns_info_ptr(struct fcp_rsp_iu *fcp_rsp_iu) static void zfcp_scsi_slave_destroy(struct scsi_device *sdpnt) { struct zfcp_unit *unit = (struct zfcp_unit *) sdpnt->hostdata; - atomic_clear_mask(ZFCP_STATUS_UNIT_REGISTERED, &unit->status); unit->device = NULL; zfcp_erp_unit_failed(unit, 12, NULL); zfcp_unit_put(unit); @@ -133,8 +132,7 @@ static int zfcp_scsi_slave_alloc(struct scsi_device *sdp) read_lock_irqsave(&zfcp_data.config_lock, flags); unit = zfcp_unit_lookup(adapter, sdp->channel, sdp->id, sdp->lun); - if (unit && - (atomic_read(&unit->status) & ZFCP_STATUS_UNIT_REGISTERED)) { + if (unit) { sdp->hostdata = unit; unit->device = sdp; zfcp_unit_get(unit); -- cgit v0.10.2 From 94506fd1483b39cd5d66b8ccb4ead3c9cc9542ac Mon Sep 17 00:00:00 2001 From: Martin Peschke Date: Mon, 2 Mar 2009 13:08:56 +0100 Subject: [SCSI] zfcp: add measurement data for average qdio queue utilisation Provide measurement data for the utilisation of the QDIO outbound queue. The additional value allows to calculate an average queue utilisation by looking at the deltas per time unit. Needed for capacity planning. It is up to user space to handle wrap-arounds of the 64 bit value. The new counter neatly complements the existing counter for queue full conditions. That is why, both statistics counter have been integrated. Signed-off-by: Martin Peschke Signed-off-by: Christof Schmitt Signed-off-by: James Bottomley diff --git a/drivers/s390/scsi/zfcp_aux.c b/drivers/s390/scsi/zfcp_aux.c index 497986f..969a3f0 100644 --- a/drivers/s390/scsi/zfcp_aux.c +++ b/drivers/s390/scsi/zfcp_aux.c @@ -501,6 +501,7 @@ int zfcp_adapter_enqueue(struct ccw_device *ccw_device) spin_lock_init(&adapter->scsi_dbf_lock); spin_lock_init(&adapter->rec_dbf_lock); spin_lock_init(&adapter->req_q_lock); + spin_lock_init(&adapter->qdio_stat_lock); rwlock_init(&adapter->erp_lock); rwlock_init(&adapter->abort_lock); diff --git a/drivers/s390/scsi/zfcp_def.h b/drivers/s390/scsi/zfcp_def.h index 56302a1..a0cd4b0 100644 --- a/drivers/s390/scsi/zfcp_def.h +++ b/drivers/s390/scsi/zfcp_def.h @@ -445,6 +445,9 @@ struct zfcp_adapter { spinlock_t req_q_lock; /* for operations on queue */ int req_q_pci_batch; /* SBALs since PCI indication was last set */ + ktime_t req_q_time; /* time of last fill level change */ + u64 req_q_util; /* for accounting */ + spinlock_t qdio_stat_lock; u32 fsf_req_seq_no; /* FSF cmnd seq number */ wait_queue_head_t request_wq; /* can be used to wait for more avaliable SBALs */ diff --git a/drivers/s390/scsi/zfcp_qdio.c b/drivers/s390/scsi/zfcp_qdio.c index 33e0a20..3d06870 100644 --- a/drivers/s390/scsi/zfcp_qdio.c +++ b/drivers/s390/scsi/zfcp_qdio.c @@ -77,6 +77,23 @@ static void zfcp_qdio_zero_sbals(struct qdio_buffer *sbal[], int first, int cnt) } } +/* this needs to be called prior to updating the queue fill level */ +static void zfcp_qdio_account(struct zfcp_adapter *adapter) +{ + ktime_t now; + s64 span; + int free, used; + + spin_lock(&adapter->qdio_stat_lock); + now = ktime_get(); + span = ktime_us_delta(now, adapter->req_q_time); + free = max(0, atomic_read(&adapter->req_q.count)); + used = QDIO_MAX_BUFFERS_PER_Q - free; + adapter->req_q_util += used * span; + adapter->req_q_time = now; + spin_unlock(&adapter->qdio_stat_lock); +} + static void zfcp_qdio_int_req(struct ccw_device *cdev, unsigned int qdio_err, int queue_no, int first, int count, unsigned long parm) @@ -93,6 +110,7 @@ static void zfcp_qdio_int_req(struct ccw_device *cdev, unsigned int qdio_err, /* cleanup all SBALs being program-owned now */ zfcp_qdio_zero_sbals(queue->sbal, first, count); + zfcp_qdio_account(adapter); atomic_add(count, &queue->count); wake_up(&adapter->request_wq); } @@ -359,6 +377,8 @@ int zfcp_qdio_send(struct zfcp_fsf_req *fsf_req) sbale->flags |= SBAL_FLAGS0_PCI; } + zfcp_qdio_account(adapter); + retval = do_QDIO(adapter->ccw_device, QDIO_FLAG_SYNC_OUTPUT, 0, first, count); if (unlikely(retval)) { diff --git a/drivers/s390/scsi/zfcp_sysfs.c b/drivers/s390/scsi/zfcp_sysfs.c index 899af2b..9e9931a 100644 --- a/drivers/s390/scsi/zfcp_sysfs.c +++ b/drivers/s390/scsi/zfcp_sysfs.c @@ -487,7 +487,8 @@ static ssize_t zfcp_sysfs_adapter_q_full_show(struct device *dev, struct zfcp_adapter *adapter = (struct zfcp_adapter *) scsi_host->hostdata[0]; - return sprintf(buf, "%d\n", atomic_read(&adapter->qdio_outb_full)); + return sprintf(buf, "%d %llu\n", atomic_read(&adapter->qdio_outb_full), + (unsigned long long)adapter->req_q_util); } static DEVICE_ATTR(queue_full, S_IRUGO, zfcp_sysfs_adapter_q_full_show, NULL); -- cgit v0.10.2 From 49f0f01c9966639f8fd7ce784a412e22057d9f2a Mon Sep 17 00:00:00 2001 From: Christof Schmitt Date: Mon, 2 Mar 2009 13:08:57 +0100 Subject: [SCSI] zfcp: Simplify latency lock handling The lock only needs to protect the softirq context called from qdio against the userspace context called from sysfs. spin_lock and spin_lock_bh is enough. Acked-by: Swen Schillig Signed-off-by: Christof Schmitt Signed-off-by: James Bottomley diff --git a/drivers/s390/scsi/zfcp_fsf.c b/drivers/s390/scsi/zfcp_fsf.c index 638cd5a..cce6981 100644 --- a/drivers/s390/scsi/zfcp_fsf.c +++ b/drivers/s390/scsi/zfcp_fsf.c @@ -2069,7 +2069,6 @@ static void zfcp_fsf_req_latency(struct zfcp_fsf_req *req) struct fsf_qual_latency_info *lat_inf; struct latency_cont *lat; struct zfcp_unit *unit = req->unit; - unsigned long flags; lat_inf = &req->qtcb->prefix.prot_status_qual.latency_info; @@ -2087,11 +2086,11 @@ static void zfcp_fsf_req_latency(struct zfcp_fsf_req *req) return; } - spin_lock_irqsave(&unit->latencies.lock, flags); + spin_lock(&unit->latencies.lock); zfcp_fsf_update_lat(&lat->channel, lat_inf->channel_lat); zfcp_fsf_update_lat(&lat->fabric, lat_inf->fabric_lat); lat->counter++; - spin_unlock_irqrestore(&unit->latencies.lock, flags); + spin_unlock(&unit->latencies.lock); } #ifdef CONFIG_BLK_DEV_IO_TRACE diff --git a/drivers/s390/scsi/zfcp_sysfs.c b/drivers/s390/scsi/zfcp_sysfs.c index 9e9931a..14e38c2 100644 --- a/drivers/s390/scsi/zfcp_sysfs.c +++ b/drivers/s390/scsi/zfcp_sysfs.c @@ -318,10 +318,9 @@ zfcp_sysfs_unit_##_name##_latency_show(struct device *dev, \ struct zfcp_unit *unit = sdev->hostdata; \ struct zfcp_latencies *lat = &unit->latencies; \ struct zfcp_adapter *adapter = unit->port->adapter; \ - unsigned long flags; \ unsigned long long fsum, fmin, fmax, csum, cmin, cmax, cc; \ \ - spin_lock_irqsave(&lat->lock, flags); \ + spin_lock_bh(&lat->lock); \ fsum = lat->_name.fabric.sum * adapter->timer_ticks; \ fmin = lat->_name.fabric.min * adapter->timer_ticks; \ fmax = lat->_name.fabric.max * adapter->timer_ticks; \ @@ -329,7 +328,7 @@ zfcp_sysfs_unit_##_name##_latency_show(struct device *dev, \ cmin = lat->_name.channel.min * adapter->timer_ticks; \ cmax = lat->_name.channel.max * adapter->timer_ticks; \ cc = lat->_name.counter; \ - spin_unlock_irqrestore(&lat->lock, flags); \ + spin_unlock_bh(&lat->lock); \ \ do_div(fsum, 1000); \ do_div(fmin, 1000); \ -- cgit v0.10.2 From 52bfb558d2803590f86360ec3af1750897a9c010 Mon Sep 17 00:00:00 2001 From: Christof Schmitt Date: Mon, 2 Mar 2009 13:08:58 +0100 Subject: [SCSI] zfcp: Only increment req_id for successfully issued requests Only increment the req_id for successfully issued requests. This avoids some confusion when debugging issued fsf requests. Acked-by: Swen Schillig Signed-off-by: Christof Schmitt Signed-off-by: James Bottomley diff --git a/drivers/s390/scsi/zfcp_fsf.c b/drivers/s390/scsi/zfcp_fsf.c index cce6981..14d7413 100644 --- a/drivers/s390/scsi/zfcp_fsf.c +++ b/drivers/s390/scsi/zfcp_fsf.c @@ -735,7 +735,7 @@ static struct zfcp_fsf_req *zfcp_fsf_req_create(struct zfcp_adapter *adapter, req->adapter = adapter; req->fsf_command = fsf_cmd; - req->req_id = adapter->req_no++; + req->req_id = adapter->req_no; req->sbal_number = 1; req->sbal_first = req_q->first; req->sbal_last = req_q->first; @@ -798,6 +798,7 @@ static int zfcp_fsf_req_send(struct zfcp_fsf_req *req) /* Don't increase for unsolicited status */ if (req->qtcb) adapter->fsf_req_seq_no++; + adapter->req_no++; return 0; } -- cgit v0.10.2 From 92cab0d93a1107ad7f6d827fde62d1aa4db15e86 Mon Sep 17 00:00:00 2001 From: Christof Schmitt Date: Mon, 2 Mar 2009 13:08:59 +0100 Subject: [SCSI] zfcp: Wait for free SBALs when possible For calls from zfcp erp, scsi_eh and sysfs switch the calls issuing FSF requests to zfcp_fsf_req_sbal_get to wait for free SBALs. Acked-by: Swen Schillig Signed-off-by: Christof Schmitt Signed-off-by: James Bottomley diff --git a/drivers/s390/scsi/zfcp_fsf.c b/drivers/s390/scsi/zfcp_fsf.c index 14d7413..1b25158 100644 --- a/drivers/s390/scsi/zfcp_fsf.c +++ b/drivers/s390/scsi/zfcp_fsf.c @@ -929,8 +929,8 @@ struct zfcp_fsf_req *zfcp_fsf_abort_fcp_command(unsigned long old_req_id, struct qdio_buffer_element *sbale; struct zfcp_fsf_req *req = NULL; - spin_lock(&adapter->req_q_lock); - if (!zfcp_fsf_sbal_available(adapter)) + spin_lock_bh(&adapter->req_q_lock); + if (zfcp_fsf_req_sbal_get(adapter)) goto out; req = zfcp_fsf_req_create(adapter, FSF_QTCB_ABORT_FCP_CMND, req_flags, adapter->pool.fsf_req_abort); @@ -961,7 +961,7 @@ out_error_free: zfcp_fsf_req_free(req); req = NULL; out: - spin_unlock(&adapter->req_q_lock); + spin_unlock_bh(&adapter->req_q_lock); return req; } @@ -1225,7 +1225,7 @@ int zfcp_fsf_exchange_config_data(struct zfcp_erp_action *erp_action) int retval = -EIO; spin_lock_bh(&adapter->req_q_lock); - if (!zfcp_fsf_sbal_available(adapter)) + if (zfcp_fsf_req_sbal_get(adapter)) goto out; req = zfcp_fsf_req_create(adapter, FSF_QTCB_EXCHANGE_CONFIG_DATA, @@ -1321,7 +1321,7 @@ int zfcp_fsf_exchange_port_data(struct zfcp_erp_action *erp_action) return -EOPNOTSUPP; spin_lock_bh(&adapter->req_q_lock); - if (!zfcp_fsf_sbal_available(adapter)) + if (zfcp_fsf_req_sbal_get(adapter)) goto out; req = zfcp_fsf_req_create(adapter, FSF_QTCB_EXCHANGE_PORT_DATA, ZFCP_REQ_AUTO_CLEANUP, @@ -1367,7 +1367,7 @@ int zfcp_fsf_exchange_port_data_sync(struct zfcp_adapter *adapter, return -EOPNOTSUPP; spin_lock_bh(&adapter->req_q_lock); - if (!zfcp_fsf_sbal_available(adapter)) + if (zfcp_fsf_req_sbal_get(adapter)) goto out; req = zfcp_fsf_req_create(adapter, FSF_QTCB_EXCHANGE_PORT_DATA, 0, @@ -2452,8 +2452,8 @@ struct zfcp_fsf_req *zfcp_fsf_send_fcp_ctm(struct zfcp_adapter *adapter, ZFCP_STATUS_COMMON_UNBLOCKED))) return NULL; - spin_lock(&adapter->req_q_lock); - if (!zfcp_fsf_sbal_available(adapter)) + spin_lock_bh(&adapter->req_q_lock); + if (zfcp_fsf_req_sbal_get(adapter)) goto out; req = zfcp_fsf_req_create(adapter, FSF_QTCB_FCP_CMND, req_flags, adapter->pool.fsf_req_scsi); @@ -2487,7 +2487,7 @@ struct zfcp_fsf_req *zfcp_fsf_send_fcp_ctm(struct zfcp_adapter *adapter, zfcp_fsf_req_free(req); req = NULL; out: - spin_unlock(&adapter->req_q_lock); + spin_unlock_bh(&adapter->req_q_lock); return req; } -- cgit v0.10.2 From 63caf367e1c92e0667a344d9b687c04e6ef054b5 Mon Sep 17 00:00:00 2001 From: Christof Schmitt Date: Mon, 2 Mar 2009 13:09:00 +0100 Subject: [SCSI] zfcp: Improve reliability of SCSI eh handlers in zfcp When the SCSI midlayer is running error recovery, the low-level error recovery in zfcp could be running and preventing the SCSI midlayer to issue error recovery requests. To avoid unnecessary error recovery escalation, wait for the zfcp erp to finish and retry if necessary. While reworking the SCSI eh handlers, alsa cleanup the code and simplify the interface from zfcp_scsi to the fsf layer. Acked-by: Swen Schillig Signed-off-by: Christof Schmitt Signed-off-by: James Bottomley diff --git a/drivers/s390/scsi/zfcp_def.h b/drivers/s390/scsi/zfcp_def.h index a0cd4b0..ff15f11 100644 --- a/drivers/s390/scsi/zfcp_def.h +++ b/drivers/s390/scsi/zfcp_def.h @@ -586,9 +586,6 @@ struct zfcp_fsf_req_qtcb { /********************** ZFCP SPECIFIC DEFINES ********************************/ -#define ZFCP_REQ_AUTO_CLEANUP 0x00000002 -#define ZFCP_REQ_NO_QTCB 0x00000008 - #define ZFCP_SET 0x00000100 #define ZFCP_CLEAR 0x00000200 diff --git a/drivers/s390/scsi/zfcp_ext.h b/drivers/s390/scsi/zfcp_ext.h index b5adeda..799ce1d 100644 --- a/drivers/s390/scsi/zfcp_ext.h +++ b/drivers/s390/scsi/zfcp_ext.h @@ -125,16 +125,13 @@ extern int zfcp_status_read_refill(struct zfcp_adapter *adapter); extern int zfcp_fsf_send_ct(struct zfcp_send_ct *, mempool_t *, struct zfcp_erp_action *); extern int zfcp_fsf_send_els(struct zfcp_send_els *); -extern int zfcp_fsf_send_fcp_command_task(struct zfcp_adapter *, - struct zfcp_unit *, - struct scsi_cmnd *, int, int); +extern int zfcp_fsf_send_fcp_command_task(struct zfcp_unit *, + struct scsi_cmnd *); extern void zfcp_fsf_req_complete(struct zfcp_fsf_req *); extern void zfcp_fsf_req_free(struct zfcp_fsf_req *); -extern struct zfcp_fsf_req *zfcp_fsf_send_fcp_ctm(struct zfcp_adapter *, - struct zfcp_unit *, u8, int); +extern struct zfcp_fsf_req *zfcp_fsf_send_fcp_ctm(struct zfcp_unit *, u8); extern struct zfcp_fsf_req *zfcp_fsf_abort_fcp_command(unsigned long, - struct zfcp_adapter *, - struct zfcp_unit *, int); + struct zfcp_unit *); /* zfcp_qdio.c */ extern int zfcp_qdio_allocate(struct zfcp_adapter *); diff --git a/drivers/s390/scsi/zfcp_fsf.c b/drivers/s390/scsi/zfcp_fsf.c index 1b25158..cc69db3 100644 --- a/drivers/s390/scsi/zfcp_fsf.c +++ b/drivers/s390/scsi/zfcp_fsf.c @@ -12,6 +12,9 @@ #include #include "zfcp_ext.h" +#define ZFCP_REQ_AUTO_CLEANUP 0x00000002 +#define ZFCP_REQ_NO_QTCB 0x00000008 + static void zfcp_fsf_request_timeout_handler(unsigned long data) { struct zfcp_adapter *adapter = (struct zfcp_adapter *) data; @@ -913,27 +916,22 @@ static void zfcp_fsf_abort_fcp_command_handler(struct zfcp_fsf_req *req) /** * zfcp_fsf_abort_fcp_command - abort running SCSI command * @old_req_id: unsigned long - * @adapter: pointer to struct zfcp_adapter * @unit: pointer to struct zfcp_unit - * @req_flags: integer specifying the request flags * Returns: pointer to struct zfcp_fsf_req - * - * FIXME(design): should be watched by a timeout !!! */ struct zfcp_fsf_req *zfcp_fsf_abort_fcp_command(unsigned long old_req_id, - struct zfcp_adapter *adapter, - struct zfcp_unit *unit, - int req_flags) + struct zfcp_unit *unit) { struct qdio_buffer_element *sbale; struct zfcp_fsf_req *req = NULL; + struct zfcp_adapter *adapter = unit->port->adapter; spin_lock_bh(&adapter->req_q_lock); if (zfcp_fsf_req_sbal_get(adapter)) goto out; req = zfcp_fsf_req_create(adapter, FSF_QTCB_ABORT_FCP_CMND, - req_flags, adapter->pool.fsf_req_abort); + 0, adapter->pool.fsf_req_abort); if (IS_ERR(req)) { req = NULL; goto out; @@ -2309,21 +2307,17 @@ static void zfcp_set_fcp_dl(struct fcp_cmnd_iu *fcp_cmd, u32 fcp_dl) /** * zfcp_fsf_send_fcp_command_task - initiate an FCP command (for a SCSI command) - * @adapter: adapter where scsi command is issued * @unit: unit where command is sent to * @scsi_cmnd: scsi command to be sent - * @timer: timer to be started when request is initiated - * @req_flags: flags for fsf_request */ -int zfcp_fsf_send_fcp_command_task(struct zfcp_adapter *adapter, - struct zfcp_unit *unit, - struct scsi_cmnd *scsi_cmnd, - int use_timer, int req_flags) +int zfcp_fsf_send_fcp_command_task(struct zfcp_unit *unit, + struct scsi_cmnd *scsi_cmnd) { struct zfcp_fsf_req *req; struct fcp_cmnd_iu *fcp_cmnd_iu; unsigned int sbtype; int real_bytes, retval = -EIO; + struct zfcp_adapter *adapter = unit->port->adapter; if (unlikely(!(atomic_read(&unit->status) & ZFCP_STATUS_COMMON_UNBLOCKED))) @@ -2332,7 +2326,8 @@ int zfcp_fsf_send_fcp_command_task(struct zfcp_adapter *adapter, spin_lock(&adapter->req_q_lock); if (!zfcp_fsf_sbal_available(adapter)) goto out; - req = zfcp_fsf_req_create(adapter, FSF_QTCB_FCP_CMND, req_flags, + req = zfcp_fsf_req_create(adapter, FSF_QTCB_FCP_CMND, + ZFCP_REQ_AUTO_CLEANUP, adapter->pool.fsf_req_scsi); if (IS_ERR(req)) { retval = PTR_ERR(req); @@ -2414,9 +2409,6 @@ int zfcp_fsf_send_fcp_command_task(struct zfcp_adapter *adapter, zfcp_set_fcp_dl(fcp_cmnd_iu, real_bytes); - if (use_timer) - zfcp_fsf_start_timer(req, ZFCP_FSF_REQUEST_TIMEOUT); - retval = zfcp_fsf_req_send(req); if (unlikely(retval)) goto failed_scsi_cmnd; @@ -2434,19 +2426,16 @@ out: /** * zfcp_fsf_send_fcp_ctm - send SCSI task management command - * @adapter: pointer to struct zfcp-adapter * @unit: pointer to struct zfcp_unit * @tm_flags: unsigned byte for task management flags - * @req_flags: int request flags * Returns: on success pointer to struct fsf_req, NULL otherwise */ -struct zfcp_fsf_req *zfcp_fsf_send_fcp_ctm(struct zfcp_adapter *adapter, - struct zfcp_unit *unit, - u8 tm_flags, int req_flags) +struct zfcp_fsf_req *zfcp_fsf_send_fcp_ctm(struct zfcp_unit *unit, u8 tm_flags) { struct qdio_buffer_element *sbale; struct zfcp_fsf_req *req = NULL; struct fcp_cmnd_iu *fcp_cmnd_iu; + struct zfcp_adapter *adapter = unit->port->adapter; if (unlikely(!(atomic_read(&unit->status) & ZFCP_STATUS_COMMON_UNBLOCKED))) @@ -2455,7 +2444,7 @@ struct zfcp_fsf_req *zfcp_fsf_send_fcp_ctm(struct zfcp_adapter *adapter, spin_lock_bh(&adapter->req_q_lock); if (zfcp_fsf_req_sbal_get(adapter)) goto out; - req = zfcp_fsf_req_create(adapter, FSF_QTCB_FCP_CMND, req_flags, + req = zfcp_fsf_req_create(adapter, FSF_QTCB_FCP_CMND, 0, adapter->pool.fsf_req_scsi); if (IS_ERR(req)) { req = NULL; diff --git a/drivers/s390/scsi/zfcp_scsi.c b/drivers/s390/scsi/zfcp_scsi.c index 7829c72..c17505f 100644 --- a/drivers/s390/scsi/zfcp_scsi.c +++ b/drivers/s390/scsi/zfcp_scsi.c @@ -87,8 +87,7 @@ static int zfcp_scsi_queuecommand(struct scsi_cmnd *scpnt, return 0;; } - ret = zfcp_fsf_send_fcp_command_task(adapter, unit, scpnt, 0, - ZFCP_REQ_AUTO_CLEANUP); + ret = zfcp_fsf_send_fcp_command_task(unit, scpnt); if (unlikely(ret == -EBUSY)) return SCSI_MLQUEUE_DEVICE_BUSY; else if (unlikely(ret < 0)) @@ -145,79 +144,91 @@ out: static int zfcp_scsi_eh_abort_handler(struct scsi_cmnd *scpnt) { - struct Scsi_Host *scsi_host; - struct zfcp_adapter *adapter; - struct zfcp_unit *unit; - struct zfcp_fsf_req *fsf_req; + struct Scsi_Host *scsi_host = scpnt->device->host; + struct zfcp_adapter *adapter = + (struct zfcp_adapter *) scsi_host->hostdata[0]; + struct zfcp_unit *unit = scpnt->device->hostdata; + struct zfcp_fsf_req *old_req, *abrt_req; unsigned long flags; unsigned long old_req_id = (unsigned long) scpnt->host_scribble; int retval = SUCCESS; - - scsi_host = scpnt->device->host; - adapter = (struct zfcp_adapter *) scsi_host->hostdata[0]; - unit = scpnt->device->hostdata; + int retry = 3; /* avoid race condition between late normal completion and abort */ write_lock_irqsave(&adapter->abort_lock, flags); - /* Check whether corresponding fsf_req is still pending */ spin_lock(&adapter->req_list_lock); - fsf_req = zfcp_reqlist_find(adapter, old_req_id); + old_req = zfcp_reqlist_find(adapter, old_req_id); spin_unlock(&adapter->req_list_lock); - if (!fsf_req) { + if (!old_req) { write_unlock_irqrestore(&adapter->abort_lock, flags); - zfcp_scsi_dbf_event_abort("lte1", adapter, scpnt, NULL, 0); - return retval; + zfcp_scsi_dbf_event_abort("lte1", adapter, scpnt, NULL, + old_req_id); + return SUCCESS; } - fsf_req->data = NULL; + old_req->data = NULL; /* don't access old fsf_req after releasing the abort_lock */ write_unlock_irqrestore(&adapter->abort_lock, flags); - fsf_req = zfcp_fsf_abort_fcp_command(old_req_id, adapter, unit, 0); - if (!fsf_req) { - zfcp_scsi_dbf_event_abort("nres", adapter, scpnt, NULL, - old_req_id); - retval = FAILED; - return retval; + while (retry--) { + abrt_req = zfcp_fsf_abort_fcp_command(old_req_id, unit); + if (abrt_req) + break; + + zfcp_erp_wait(adapter); + if (!(atomic_read(&adapter->status) & + ZFCP_STATUS_COMMON_RUNNING)) { + zfcp_scsi_dbf_event_abort("nres", adapter, scpnt, NULL, + old_req_id); + return SUCCESS; + } } + if (!abrt_req) + return FAILED; - __wait_event(fsf_req->completion_wq, - fsf_req->status & ZFCP_STATUS_FSFREQ_COMPLETED); + wait_event(abrt_req->completion_wq, + abrt_req->status & ZFCP_STATUS_FSFREQ_COMPLETED); - if (fsf_req->status & ZFCP_STATUS_FSFREQ_ABORTSUCCEEDED) { - zfcp_scsi_dbf_event_abort("okay", adapter, scpnt, fsf_req, 0); - } else if (fsf_req->status & ZFCP_STATUS_FSFREQ_ABORTNOTNEEDED) { - zfcp_scsi_dbf_event_abort("lte2", adapter, scpnt, fsf_req, 0); - } else { - zfcp_scsi_dbf_event_abort("fail", adapter, scpnt, fsf_req, 0); + if (abrt_req->status & ZFCP_STATUS_FSFREQ_ABORTSUCCEEDED) + zfcp_scsi_dbf_event_abort("okay", adapter, scpnt, abrt_req, 0); + else if (abrt_req->status & ZFCP_STATUS_FSFREQ_ABORTNOTNEEDED) + zfcp_scsi_dbf_event_abort("lte2", adapter, scpnt, abrt_req, 0); + else { + zfcp_scsi_dbf_event_abort("fail", adapter, scpnt, abrt_req, 0); retval = FAILED; } - zfcp_fsf_req_free(fsf_req); - + zfcp_fsf_req_free(abrt_req); return retval; } -static int zfcp_task_mgmt_function(struct zfcp_unit *unit, u8 tm_flags, - struct scsi_cmnd *scpnt) +static int zfcp_task_mgmt_function(struct scsi_cmnd *scpnt, u8 tm_flags) { + struct zfcp_unit *unit = scpnt->device->hostdata; struct zfcp_adapter *adapter = unit->port->adapter; struct zfcp_fsf_req *fsf_req; int retval = SUCCESS; - - /* issue task management function */ - fsf_req = zfcp_fsf_send_fcp_ctm(adapter, unit, tm_flags, 0); - if (!fsf_req) { - zfcp_scsi_dbf_event_devreset("nres", tm_flags, unit, scpnt); - return FAILED; + int retry = 3; + + while (retry--) { + fsf_req = zfcp_fsf_send_fcp_ctm(unit, tm_flags); + if (fsf_req) + break; + + zfcp_erp_wait(adapter); + if (!(atomic_read(&adapter->status) & + ZFCP_STATUS_COMMON_RUNNING)) { + zfcp_scsi_dbf_event_devreset("nres", tm_flags, unit, + scpnt); + return SUCCESS; + } } + if (!fsf_req) + return FAILED; - __wait_event(fsf_req->completion_wq, - fsf_req->status & ZFCP_STATUS_FSFREQ_COMPLETED); + wait_event(fsf_req->completion_wq, + fsf_req->status & ZFCP_STATUS_FSFREQ_COMPLETED); - /* - * check completion status of task management function - */ if (fsf_req->status & ZFCP_STATUS_FSFREQ_TMFUNCFAILED) { zfcp_scsi_dbf_event_devreset("fail", tm_flags, unit, scpnt); retval = FAILED; @@ -228,39 +239,24 @@ static int zfcp_task_mgmt_function(struct zfcp_unit *unit, u8 tm_flags, zfcp_scsi_dbf_event_devreset("okay", tm_flags, unit, scpnt); zfcp_fsf_req_free(fsf_req); - return retval; } static int zfcp_scsi_eh_device_reset_handler(struct scsi_cmnd *scpnt) { - struct zfcp_unit *unit = scpnt->device->hostdata; - - if (!unit) { - WARN_ON(1); - return SUCCESS; - } - return zfcp_task_mgmt_function(unit, FCP_LOGICAL_UNIT_RESET, scpnt); + return zfcp_task_mgmt_function(scpnt, FCP_LOGICAL_UNIT_RESET); } static int zfcp_scsi_eh_target_reset_handler(struct scsi_cmnd *scpnt) { - struct zfcp_unit *unit = scpnt->device->hostdata; - - if (!unit) { - WARN_ON(1); - return SUCCESS; - } - return zfcp_task_mgmt_function(unit, FCP_TARGET_RESET, scpnt); + return zfcp_task_mgmt_function(scpnt, FCP_TARGET_RESET); } static int zfcp_scsi_eh_host_reset_handler(struct scsi_cmnd *scpnt) { - struct zfcp_unit *unit; - struct zfcp_adapter *adapter; + struct zfcp_unit *unit = scpnt->device->hostdata; + struct zfcp_adapter *adapter = unit->port->adapter; - unit = scpnt->device->hostdata; - adapter = unit->port->adapter; zfcp_erp_adapter_reopen(adapter, 0, 141, scpnt); zfcp_erp_wait(adapter); -- cgit v0.10.2 From 8fdf30d5429605a4c30cc515c73e5eab140035de Mon Sep 17 00:00:00 2001 From: Christof Schmitt Date: Mon, 2 Mar 2009 13:09:01 +0100 Subject: [SCSI] zfcp: Send ELS ADISC from workqueue Issue ELS ADISC requests from workqueue. This allows the link test request to be sent when the request queue is full due to I/O load for other remote ports. It also simplifies request queue locking, zfcp_fsf_send_fcp_command_task is now the only function that has interrupts disabled from the caller. This is also a prereq for the FC passthrough support that issues ELS requests from userspace. Acked-by: Swen Schillig Signed-off-by: Christof Schmitt Signed-off-by: James Bottomley diff --git a/drivers/s390/scsi/zfcp_aux.c b/drivers/s390/scsi/zfcp_aux.c index 969a3f0..1e16ab5 100644 --- a/drivers/s390/scsi/zfcp_aux.c +++ b/drivers/s390/scsi/zfcp_aux.c @@ -604,6 +604,7 @@ struct zfcp_port *zfcp_port_enqueue(struct zfcp_adapter *adapter, u64 wwpn, init_waitqueue_head(&port->remove_wq); INIT_LIST_HEAD(&port->unit_list_head); INIT_WORK(&port->gid_pn_work, zfcp_erp_port_strategy_open_lookup); + INIT_WORK(&port->test_link_work, zfcp_fc_link_test_work); port->adapter = adapter; port->d_id = d_id; diff --git a/drivers/s390/scsi/zfcp_def.h b/drivers/s390/scsi/zfcp_def.h index ff15f11..8412bb9 100644 --- a/drivers/s390/scsi/zfcp_def.h +++ b/drivers/s390/scsi/zfcp_def.h @@ -513,6 +513,7 @@ struct zfcp_port { u32 maxframe_size; u32 supported_classes; struct work_struct gid_pn_work; + struct work_struct test_link_work; }; struct zfcp_unit { diff --git a/drivers/s390/scsi/zfcp_ext.h b/drivers/s390/scsi/zfcp_ext.h index 799ce1d..a2b4987 100644 --- a/drivers/s390/scsi/zfcp_ext.h +++ b/drivers/s390/scsi/zfcp_ext.h @@ -101,6 +101,7 @@ extern void zfcp_fc_incoming_els(struct zfcp_fsf_req *); extern int zfcp_fc_ns_gid_pn(struct zfcp_erp_action *); extern void zfcp_fc_plogi_evaluate(struct zfcp_port *, struct fsf_plogi *); extern void zfcp_test_link(struct zfcp_port *); +extern void zfcp_fc_link_test_work(struct work_struct *); extern void zfcp_fc_nameserver_init(struct zfcp_adapter *); /* zfcp_fsf.c */ diff --git a/drivers/s390/scsi/zfcp_fc.c b/drivers/s390/scsi/zfcp_fc.c index 67e6b71..0f435ed 100644 --- a/drivers/s390/scsi/zfcp_fc.c +++ b/drivers/s390/scsi/zfcp_fc.c @@ -421,19 +421,12 @@ static int zfcp_fc_adisc(struct zfcp_port *port) return zfcp_fsf_send_els(&adisc->els); } -/** - * zfcp_test_link - lightweight link test procedure - * @port: port to be tested - * - * Test status of a link to a remote port using the ELS command ADISC. - * If there is a problem with the remote port, error recovery steps - * will be triggered. - */ -void zfcp_test_link(struct zfcp_port *port) +void zfcp_fc_link_test_work(struct work_struct *work) { + struct zfcp_port *port = + container_of(work, struct zfcp_port, test_link_work); int retval; - zfcp_port_get(port); retval = zfcp_fc_adisc(port); if (retval == 0) return; @@ -444,6 +437,21 @@ void zfcp_test_link(struct zfcp_port *port) zfcp_erp_port_forced_reopen(port, 0, 65, NULL); } +/** + * zfcp_test_link - lightweight link test procedure + * @port: port to be tested + * + * Test status of a link to a remote port using the ELS command ADISC. + * If there is a problem with the remote port, error recovery steps + * will be triggered. + */ +void zfcp_test_link(struct zfcp_port *port) +{ + zfcp_port_get(port); + if (!queue_work(zfcp_data.work_queue, &port->test_link_work)) + zfcp_port_put(port); +} + static void zfcp_free_sg_env(struct zfcp_gpn_ft *gpn_ft, int buf_num) { struct scatterlist *sg = &gpn_ft->sg_req; diff --git a/drivers/s390/scsi/zfcp_fsf.c b/drivers/s390/scsi/zfcp_fsf.c index cc69db3..9c3f91a 100644 --- a/drivers/s390/scsi/zfcp_fsf.c +++ b/drivers/s390/scsi/zfcp_fsf.c @@ -647,14 +647,6 @@ static void zfcp_fsf_exchange_port_data_handler(struct zfcp_fsf_req *req) } } -static int zfcp_fsf_sbal_available(struct zfcp_adapter *adapter) -{ - if (atomic_read(&adapter->req_q.count) > 0) - return 1; - atomic_inc(&adapter->qdio_outb_full); - return 0; -} - static int zfcp_fsf_req_sbal_get(struct zfcp_adapter *adapter) __releases(&adapter->req_q_lock) __acquires(&adapter->req_q_lock) @@ -1177,8 +1169,8 @@ int zfcp_fsf_send_els(struct zfcp_send_els *els) ZFCP_STATUS_COMMON_UNBLOCKED))) return -EBUSY; - spin_lock(&adapter->req_q_lock); - if (!zfcp_fsf_sbal_available(adapter)) + spin_lock_bh(&adapter->req_q_lock); + if (zfcp_fsf_req_sbal_get(adapter)) goto out; req = zfcp_fsf_req_create(adapter, FSF_QTCB_SEND_ELS, ZFCP_REQ_AUTO_CLEANUP, NULL); @@ -1211,7 +1203,7 @@ int zfcp_fsf_send_els(struct zfcp_send_els *els) failed_send: zfcp_fsf_req_free(req); out: - spin_unlock(&adapter->req_q_lock); + spin_unlock_bh(&adapter->req_q_lock); return ret; } @@ -2324,8 +2316,10 @@ int zfcp_fsf_send_fcp_command_task(struct zfcp_unit *unit, return -EBUSY; spin_lock(&adapter->req_q_lock); - if (!zfcp_fsf_sbal_available(adapter)) + if (atomic_read(&adapter->req_q.count) <= 0) { + atomic_inc(&adapter->qdio_outb_full); goto out; + } req = zfcp_fsf_req_create(adapter, FSF_QTCB_FCP_CMND, ZFCP_REQ_AUTO_CLEANUP, adapter->pool.fsf_req_scsi); -- cgit v0.10.2 From 21283916322f579a580e413652cdefbfa3ec676f Mon Sep 17 00:00:00 2001 From: Swen Schillig Date: Mon, 2 Mar 2009 13:09:02 +0100 Subject: [SCSI] zfcp: remove undefined subtype for status read response The status read response FSF_STATUS_READ_SUB_ERROR_PORT is not defined in the specs and therefore not valid. All occurrences are removed from the code. Signed-off-by: Swen Schillig Signed-off-by: Christof Schmitt Signed-off-by: James Bottomley diff --git a/drivers/s390/scsi/zfcp_dbf.c b/drivers/s390/scsi/zfcp_dbf.c index cb6df60..ab843f2 100644 --- a/drivers/s390/scsi/zfcp_dbf.c +++ b/drivers/s390/scsi/zfcp_dbf.c @@ -615,7 +615,7 @@ static const char *zfcp_rec_dbf_ids[] = { [119] = "unknown protocol status", [120] = "unknown fsf command", [121] = "no recommendation for status qualifier", - [122] = "status read physical port closed in error", + [122] = "", [123] = "fc service class not supported", [124] = "", [125] = "need newer zfcp", diff --git a/drivers/s390/scsi/zfcp_fsf.c b/drivers/s390/scsi/zfcp_fsf.c index 9c3f91a..698e422 100644 --- a/drivers/s390/scsi/zfcp_fsf.c +++ b/drivers/s390/scsi/zfcp_fsf.c @@ -162,14 +162,7 @@ static void zfcp_fsf_status_read_port_closed(struct zfcp_fsf_req *req) list_for_each_entry(port, &adapter->port_list_head, list) if (port->d_id == d_id) { read_unlock_irqrestore(&zfcp_data.config_lock, flags); - switch (sr_buf->status_subtype) { - case FSF_STATUS_READ_SUB_CLOSE_PHYS_PORT: - zfcp_erp_port_reopen(port, 0, 101, req); - break; - case FSF_STATUS_READ_SUB_ERROR_PORT: - zfcp_erp_port_shutdown(port, 0, 122, req); - break; - } + zfcp_erp_port_reopen(port, 0, 101, req); return; } read_unlock_irqrestore(&zfcp_data.config_lock, flags); diff --git a/drivers/s390/scsi/zfcp_fsf.h b/drivers/s390/scsi/zfcp_fsf.h index 8bb2002..df7f232 100644 --- a/drivers/s390/scsi/zfcp_fsf.h +++ b/drivers/s390/scsi/zfcp_fsf.h @@ -127,10 +127,6 @@ #define FSF_STATUS_READ_CFDC_UPDATED 0x0000000A #define FSF_STATUS_READ_FEATURE_UPDATE_ALERT 0x0000000C -/* status subtypes in status read buffer */ -#define FSF_STATUS_READ_SUB_CLOSE_PHYS_PORT 0x00000001 -#define FSF_STATUS_READ_SUB_ERROR_PORT 0x00000002 - /* status subtypes for link down */ #define FSF_STATUS_READ_SUB_NO_PHYSICAL_LINK 0x00000000 #define FSF_STATUS_READ_SUB_FDISC_FAILED 0x00000001 -- cgit v0.10.2 From cf13c08223148e525d28f4a740f2e73518ec6abe Mon Sep 17 00:00:00 2001 From: Swen Schillig Date: Mon, 2 Mar 2009 13:09:03 +0100 Subject: [SCSI] zfcp: prevent adapter close on initial adapter open An adapter close was always performed whether it was required, (e.g. in an error scenario) or not (e.g. initial open). This patch is changing the process in only doing an adapter close when it is required. Signed-off-by: Swen Schillig Signed-off-by: Christof Schmitt Signed-off-by: James Bottomley diff --git a/drivers/s390/scsi/zfcp_erp.c b/drivers/s390/scsi/zfcp_erp.c index 2a00f81..28c7185 100644 --- a/drivers/s390/scsi/zfcp_erp.c +++ b/drivers/s390/scsi/zfcp_erp.c @@ -705,32 +705,10 @@ static int zfcp_erp_adapter_strategy_open_fsf(struct zfcp_erp_action *act) return ZFCP_ERP_SUCCEEDED; } -static int zfcp_erp_adapter_strategy_generic(struct zfcp_erp_action *act, - int close) +static void zfcp_erp_adapter_strategy_close(struct zfcp_erp_action *act) { - int retval = ZFCP_ERP_SUCCEEDED; struct zfcp_adapter *adapter = act->adapter; - if (close) - goto close_only; - - retval = zfcp_erp_adapter_strategy_open_qdio(act); - if (retval != ZFCP_ERP_SUCCEEDED) - goto failed_qdio; - - retval = zfcp_erp_adapter_strategy_open_fsf(act); - if (retval != ZFCP_ERP_SUCCEEDED) - goto failed_openfcp; - - atomic_set_mask(ZFCP_STATUS_COMMON_OPEN, &act->adapter->status); - - return ZFCP_ERP_SUCCEEDED; - - close_only: - atomic_clear_mask(ZFCP_STATUS_COMMON_OPEN, - &act->adapter->status); - - failed_openfcp: /* close queues to ensure that buffers are not accessed by adapter */ zfcp_qdio_close(adapter); zfcp_fsf_req_dismiss_all(adapter); @@ -738,27 +716,48 @@ static int zfcp_erp_adapter_strategy_generic(struct zfcp_erp_action *act, /* all ports and units are closed */ zfcp_erp_modify_adapter_status(adapter, 24, NULL, ZFCP_STATUS_COMMON_OPEN, ZFCP_CLEAR); - failed_qdio: + atomic_clear_mask(ZFCP_STATUS_ADAPTER_XCONFIG_OK | - ZFCP_STATUS_ADAPTER_LINK_UNPLUGGED, - &act->adapter->status); - return retval; + ZFCP_STATUS_ADAPTER_LINK_UNPLUGGED, &adapter->status); } -static int zfcp_erp_adapter_strategy(struct zfcp_erp_action *act) +static int zfcp_erp_adapter_strategy_open(struct zfcp_erp_action *act) { - int retval; + struct zfcp_adapter *adapter = act->adapter; - zfcp_erp_adapter_strategy_generic(act, 1); /* close */ - if (act->status & ZFCP_STATUS_ERP_CLOSE_ONLY) - return ZFCP_ERP_EXIT; + if (zfcp_erp_adapter_strategy_open_qdio(act)) { + atomic_clear_mask(ZFCP_STATUS_ADAPTER_XCONFIG_OK | + ZFCP_STATUS_ADAPTER_LINK_UNPLUGGED, + &adapter->status); + return ZFCP_ERP_FAILED; + } - retval = zfcp_erp_adapter_strategy_generic(act, 0); /* open */ + if (zfcp_erp_adapter_strategy_open_fsf(act)) { + zfcp_erp_adapter_strategy_close(act); + return ZFCP_ERP_FAILED; + } + + atomic_set_mask(ZFCP_STATUS_COMMON_OPEN, &adapter->status); + + return ZFCP_ERP_SUCCEEDED; +} + +static int zfcp_erp_adapter_strategy(struct zfcp_erp_action *act) +{ + struct zfcp_adapter *adapter = act->adapter; + + if (atomic_read(&adapter->status) & ZFCP_STATUS_COMMON_OPEN) { + zfcp_erp_adapter_strategy_close(act); + if (act->status & ZFCP_STATUS_ERP_CLOSE_ONLY) + return ZFCP_ERP_EXIT; + } - if (retval == ZFCP_ERP_FAILED) + if (zfcp_erp_adapter_strategy_open(act)) { ssleep(8); + return ZFCP_ERP_FAILED; + } - return retval; + return ZFCP_ERP_SUCCEEDED; } static int zfcp_erp_port_forced_strategy_close(struct zfcp_erp_action *act) -- cgit v0.10.2 From 5ffd51a5e495a2a002efd523aef0001912b080bd Mon Sep 17 00:00:00 2001 From: Swen Schillig Date: Mon, 2 Mar 2009 13:09:04 +0100 Subject: [SCSI] zfcp: replace current ERP logging with a more convenient version The current number based id ERP logging is replaced by a string based tag version. The benefit is an easier location of the code in question and the removal of the lengthy array referencing the individual messages. The string (7 bytes) based version does not use more space since those bytes were "used" anyway due to the alignment of the structure. The encoding of the 7 byte string is as follows [0-1] = filename [2-5] = task/function [6] = section Due to the character of this string (fixed length) a string termination is not required here. Signed-off-by: Swen Schillig Signed-off-by: Christof Schmitt Signed-off-by: James Bottomley diff --git a/drivers/s390/scsi/zfcp_aux.c b/drivers/s390/scsi/zfcp_aux.c index 1e16ab5..69a3118 100644 --- a/drivers/s390/scsi/zfcp_aux.c +++ b/drivers/s390/scsi/zfcp_aux.c @@ -421,7 +421,8 @@ int zfcp_status_read_refill(struct zfcp_adapter *adapter) while (atomic_read(&adapter->stat_miss) > 0) if (zfcp_fsf_status_read(adapter)) { if (atomic_read(&adapter->stat_miss) >= 16) { - zfcp_erp_adapter_reopen(adapter, 0, 103, NULL); + zfcp_erp_adapter_reopen(adapter, 0, "axsref1", + NULL); return 1; } break; diff --git a/drivers/s390/scsi/zfcp_ccw.c b/drivers/s390/scsi/zfcp_ccw.c index 683ac4e..3aeef28 100644 --- a/drivers/s390/scsi/zfcp_ccw.c +++ b/drivers/s390/scsi/zfcp_ccw.c @@ -109,10 +109,10 @@ static int zfcp_ccw_set_online(struct ccw_device *ccw_device) BUG_ON(!zfcp_reqlist_isempty(adapter)); adapter->req_no = 0; - zfcp_erp_modify_adapter_status(adapter, 10, NULL, + zfcp_erp_modify_adapter_status(adapter, "ccsonl1", NULL, ZFCP_STATUS_COMMON_RUNNING, ZFCP_SET); - zfcp_erp_adapter_reopen(adapter, ZFCP_STATUS_COMMON_ERP_FAILED, 85, - NULL); + zfcp_erp_adapter_reopen(adapter, ZFCP_STATUS_COMMON_ERP_FAILED, + "ccsonl2", NULL); zfcp_erp_wait(adapter); up(&zfcp_data.config_sema); flush_work(&adapter->scan_work); @@ -136,7 +136,7 @@ static int zfcp_ccw_set_offline(struct ccw_device *ccw_device) down(&zfcp_data.config_sema); adapter = dev_get_drvdata(&ccw_device->dev); - zfcp_erp_adapter_shutdown(adapter, 0, 86, NULL); + zfcp_erp_adapter_shutdown(adapter, 0, "ccsoff1", NULL); zfcp_erp_wait(adapter); zfcp_erp_thread_kill(adapter); up(&zfcp_data.config_sema); @@ -159,21 +159,21 @@ static int zfcp_ccw_notify(struct ccw_device *ccw_device, int event) case CIO_GONE: dev_warn(&adapter->ccw_device->dev, "The FCP device has been detached\n"); - zfcp_erp_adapter_shutdown(adapter, 0, 87, NULL); + zfcp_erp_adapter_shutdown(adapter, 0, "ccnoti1", NULL); break; case CIO_NO_PATH: dev_warn(&adapter->ccw_device->dev, "The CHPID for the FCP device is offline\n"); - zfcp_erp_adapter_shutdown(adapter, 0, 88, NULL); + zfcp_erp_adapter_shutdown(adapter, 0, "ccnoti2", NULL); break; case CIO_OPER: dev_info(&adapter->ccw_device->dev, "The FCP device is operational again\n"); - zfcp_erp_modify_adapter_status(adapter, 11, NULL, + zfcp_erp_modify_adapter_status(adapter, "ccnoti3", NULL, ZFCP_STATUS_COMMON_RUNNING, ZFCP_SET); zfcp_erp_adapter_reopen(adapter, ZFCP_STATUS_COMMON_ERP_FAILED, - 89, NULL); + "ccnoti4", NULL); break; } return 1; @@ -189,7 +189,7 @@ static void zfcp_ccw_shutdown(struct ccw_device *cdev) down(&zfcp_data.config_sema); adapter = dev_get_drvdata(&cdev->dev); - zfcp_erp_adapter_shutdown(adapter, 0, 90, NULL); + zfcp_erp_adapter_shutdown(adapter, 0, "ccshut1", NULL); zfcp_erp_wait(adapter); up(&zfcp_data.config_sema); } diff --git a/drivers/s390/scsi/zfcp_dbf.c b/drivers/s390/scsi/zfcp_dbf.c index ab843f2..0a1a5dd 100644 --- a/drivers/s390/scsi/zfcp_dbf.c +++ b/drivers/s390/scsi/zfcp_dbf.c @@ -490,172 +490,17 @@ static const char *zfcp_rec_dbf_tags[] = { [ZFCP_REC_DBF_ID_ACTION] = "action", }; -static const char *zfcp_rec_dbf_ids[] = { - [1] = "new", - [2] = "ready", - [3] = "kill", - [4] = "down sleep", - [5] = "down wakeup", - [6] = "down sleep ecd", - [7] = "down wakeup ecd", - [8] = "down sleep epd", - [9] = "down wakeup epd", - [10] = "online", - [11] = "operational", - [12] = "scsi slave destroy", - [13] = "propagate failed adapter", - [14] = "propagate failed port", - [15] = "block adapter", - [16] = "unblock adapter", - [17] = "block port", - [18] = "unblock port", - [19] = "block unit", - [20] = "unblock unit", - [21] = "unit recovery failed", - [22] = "port recovery failed", - [23] = "adapter recovery failed", - [24] = "qdio queues down", - [25] = "p2p failed", - [26] = "nameserver lookup failed", - [27] = "nameserver port failed", - [28] = "link up", - [29] = "link down", - [30] = "link up status read", - [31] = "open port failed", - [32] = "", - [33] = "close port", - [34] = "open unit failed", - [35] = "exclusive open unit failed", - [36] = "shared open unit failed", - [37] = "link down", - [38] = "link down status read no link", - [39] = "link down status read fdisc login", - [40] = "link down status read firmware update", - [41] = "link down status read unknown reason", - [42] = "link down ecd incomplete", - [43] = "link down epd incomplete", - [44] = "sysfs adapter recovery", - [45] = "sysfs port recovery", - [46] = "sysfs unit recovery", - [47] = "port boxed abort", - [48] = "unit boxed abort", - [49] = "port boxed ct", - [50] = "port boxed close physical", - [51] = "port boxed open unit", - [52] = "port boxed close unit", - [53] = "port boxed fcp", - [54] = "unit boxed fcp", - [55] = "port access denied", - [56] = "", - [57] = "", - [58] = "", - [59] = "unit access denied", - [60] = "shared unit access denied open unit", - [61] = "", - [62] = "request timeout", - [63] = "adisc link test reject or timeout", - [64] = "adisc link test d_id changed", - [65] = "adisc link test failed", - [66] = "recovery out of memory", - [67] = "adapter recovery repeated after state change", - [68] = "port recovery repeated after state change", - [69] = "unit recovery repeated after state change", - [70] = "port recovery follow-up after successful adapter recovery", - [71] = "adapter recovery escalation after failed adapter recovery", - [72] = "port recovery follow-up after successful physical port " - "recovery", - [73] = "adapter recovery escalation after failed physical port " - "recovery", - [74] = "unit recovery follow-up after successful port recovery", - [75] = "physical port recovery escalation after failed port " - "recovery", - [76] = "port recovery escalation after failed unit recovery", - [77] = "", - [78] = "duplicate request id", - [79] = "link down", - [80] = "exclusive read-only unit access unsupported", - [81] = "shared read-write unit access unsupported", - [82] = "incoming rscn", - [83] = "incoming wwpn", - [84] = "wka port handle not valid close port", - [85] = "online", - [86] = "offline", - [87] = "ccw device gone", - [88] = "ccw device no path", - [89] = "ccw device operational", - [90] = "ccw device shutdown", - [91] = "sysfs port addition", - [92] = "sysfs port removal", - [93] = "sysfs adapter recovery", - [94] = "sysfs unit addition", - [95] = "sysfs unit removal", - [96] = "sysfs port recovery", - [97] = "sysfs unit recovery", - [98] = "sequence number mismatch", - [99] = "link up", - [100] = "error state", - [101] = "status read physical port closed", - [102] = "link up status read", - [103] = "too many failed status read buffers", - [104] = "port handle not valid abort", - [105] = "lun handle not valid abort", - [106] = "port handle not valid ct", - [107] = "port handle not valid close port", - [108] = "port handle not valid close physical port", - [109] = "port handle not valid open unit", - [110] = "port handle not valid close unit", - [111] = "lun handle not valid close unit", - [112] = "port handle not valid fcp", - [113] = "lun handle not valid fcp", - [114] = "handle mismatch fcp", - [115] = "lun not valid fcp", - [116] = "qdio send failed", - [117] = "version mismatch", - [118] = "incompatible qtcb type", - [119] = "unknown protocol status", - [120] = "unknown fsf command", - [121] = "no recommendation for status qualifier", - [122] = "", - [123] = "fc service class not supported", - [124] = "", - [125] = "need newer zfcp", - [126] = "need newer microcode", - [127] = "arbitrated loop not supported", - [128] = "", - [129] = "qtcb size mismatch", - [130] = "unknown fsf status ecd", - [131] = "fcp request too big", - [132] = "", - [133] = "data direction not valid fcp", - [134] = "command length not valid fcp", - [135] = "status read act update", - [136] = "status read cfdc update", - [137] = "hbaapi port open", - [138] = "hbaapi unit open", - [139] = "hbaapi unit shutdown", - [140] = "qdio error outbound", - [141] = "scsi host reset", - [142] = "dismissing fsf request for recovery action", - [143] = "recovery action timed out", - [144] = "recovery action gone", - [145] = "recovery action being processed", - [146] = "recovery action ready for next step", - [147] = "qdio error inbound", - [148] = "nameserver needed for port scan", - [149] = "port scan", - [150] = "ptp attach", - [151] = "port validation failed", -}; - static int zfcp_rec_dbf_view_format(debug_info_t *id, struct debug_view *view, char *buf, const char *_rec) { struct zfcp_rec_dbf_record *r = (struct zfcp_rec_dbf_record *)_rec; char *p = buf; + char hint[ZFCP_DBF_ID_SIZE + 1]; + memcpy(hint, r->id2, ZFCP_DBF_ID_SIZE); + hint[ZFCP_DBF_ID_SIZE] = 0; zfcp_dbf_outs(&p, "tag", zfcp_rec_dbf_tags[r->id]); - zfcp_dbf_outs(&p, "hint", zfcp_rec_dbf_ids[r->id2]); - zfcp_dbf_out(&p, "id", "%d", r->id2); + zfcp_dbf_outs(&p, "hint", hint); switch (r->id) { case ZFCP_REC_DBF_ID_THREAD: zfcp_dbf_out(&p, "total", "%d", r->u.thread.total); @@ -707,7 +552,7 @@ static struct debug_view zfcp_rec_dbf_view = { * @adapter: adapter * This function assumes that the caller is holding erp_lock. */ -void zfcp_rec_dbf_event_thread(u8 id2, struct zfcp_adapter *adapter) +void zfcp_rec_dbf_event_thread(char *id2, struct zfcp_adapter *adapter) { struct zfcp_rec_dbf_record *r = &adapter->rec_dbf_buf; unsigned long flags = 0; @@ -723,7 +568,7 @@ void zfcp_rec_dbf_event_thread(u8 id2, struct zfcp_adapter *adapter) spin_lock_irqsave(&adapter->rec_dbf_lock, flags); memset(r, 0, sizeof(*r)); r->id = ZFCP_REC_DBF_ID_THREAD; - r->id2 = id2; + memcpy(r->id2, id2, ZFCP_DBF_ID_SIZE); r->u.thread.total = total; r->u.thread.ready = ready; r->u.thread.running = running; @@ -737,7 +582,7 @@ void zfcp_rec_dbf_event_thread(u8 id2, struct zfcp_adapter *adapter) * @adapter: adapter * This function assumes that the caller does not hold erp_lock. */ -void zfcp_rec_dbf_event_thread_lock(u8 id2, struct zfcp_adapter *adapter) +void zfcp_rec_dbf_event_thread_lock(char *id2, struct zfcp_adapter *adapter) { unsigned long flags; @@ -746,7 +591,7 @@ void zfcp_rec_dbf_event_thread_lock(u8 id2, struct zfcp_adapter *adapter) read_unlock_irqrestore(&adapter->erp_lock, flags); } -static void zfcp_rec_dbf_event_target(u8 id2, void *ref, +static void zfcp_rec_dbf_event_target(char *id2, void *ref, struct zfcp_adapter *adapter, atomic_t *status, atomic_t *erp_count, u64 wwpn, u32 d_id, u64 fcp_lun) @@ -757,7 +602,7 @@ static void zfcp_rec_dbf_event_target(u8 id2, void *ref, spin_lock_irqsave(&adapter->rec_dbf_lock, flags); memset(r, 0, sizeof(*r)); r->id = ZFCP_REC_DBF_ID_TARGET; - r->id2 = id2; + memcpy(r->id2, id2, ZFCP_DBF_ID_SIZE); r->u.target.ref = (unsigned long)ref; r->u.target.status = atomic_read(status); r->u.target.wwpn = wwpn; @@ -774,7 +619,8 @@ static void zfcp_rec_dbf_event_target(u8 id2, void *ref, * @ref: additional reference (e.g. request) * @adapter: adapter */ -void zfcp_rec_dbf_event_adapter(u8 id, void *ref, struct zfcp_adapter *adapter) +void zfcp_rec_dbf_event_adapter(char *id, void *ref, + struct zfcp_adapter *adapter) { zfcp_rec_dbf_event_target(id, ref, adapter, &adapter->status, &adapter->erp_counter, 0, 0, 0); @@ -786,7 +632,7 @@ void zfcp_rec_dbf_event_adapter(u8 id, void *ref, struct zfcp_adapter *adapter) * @ref: additional reference (e.g. request) * @port: port */ -void zfcp_rec_dbf_event_port(u8 id, void *ref, struct zfcp_port *port) +void zfcp_rec_dbf_event_port(char *id, void *ref, struct zfcp_port *port) { struct zfcp_adapter *adapter = port->adapter; @@ -801,7 +647,7 @@ void zfcp_rec_dbf_event_port(u8 id, void *ref, struct zfcp_port *port) * @ref: additional reference (e.g. request) * @unit: unit */ -void zfcp_rec_dbf_event_unit(u8 id, void *ref, struct zfcp_unit *unit) +void zfcp_rec_dbf_event_unit(char *id, void *ref, struct zfcp_unit *unit) { struct zfcp_port *port = unit->port; struct zfcp_adapter *adapter = port->adapter; @@ -822,7 +668,7 @@ void zfcp_rec_dbf_event_unit(u8 id, void *ref, struct zfcp_unit *unit) * @port: port * @unit: unit */ -void zfcp_rec_dbf_event_trigger(u8 id2, void *ref, u8 want, u8 need, +void zfcp_rec_dbf_event_trigger(char *id2, void *ref, u8 want, u8 need, void *action, struct zfcp_adapter *adapter, struct zfcp_port *port, struct zfcp_unit *unit) { @@ -832,7 +678,7 @@ void zfcp_rec_dbf_event_trigger(u8 id2, void *ref, u8 want, u8 need, spin_lock_irqsave(&adapter->rec_dbf_lock, flags); memset(r, 0, sizeof(*r)); r->id = ZFCP_REC_DBF_ID_TRIGGER; - r->id2 = id2; + memcpy(r->id2, id2, ZFCP_DBF_ID_SIZE); r->u.trigger.ref = (unsigned long)ref; r->u.trigger.want = want; r->u.trigger.need = need; @@ -855,7 +701,7 @@ void zfcp_rec_dbf_event_trigger(u8 id2, void *ref, u8 want, u8 need, * @id2: identifier * @erp_action: error recovery action struct pointer */ -void zfcp_rec_dbf_event_action(u8 id2, struct zfcp_erp_action *erp_action) +void zfcp_rec_dbf_event_action(char *id2, struct zfcp_erp_action *erp_action) { struct zfcp_adapter *adapter = erp_action->adapter; struct zfcp_rec_dbf_record *r = &adapter->rec_dbf_buf; @@ -864,7 +710,7 @@ void zfcp_rec_dbf_event_action(u8 id2, struct zfcp_erp_action *erp_action) spin_lock_irqsave(&adapter->rec_dbf_lock, flags); memset(r, 0, sizeof(*r)); r->id = ZFCP_REC_DBF_ID_ACTION; - r->id2 = id2; + memcpy(r->id2, id2, ZFCP_DBF_ID_SIZE); r->u.action.action = (unsigned long)erp_action; r->u.action.status = erp_action->status; r->u.action.step = erp_action->step; diff --git a/drivers/s390/scsi/zfcp_dbf.h b/drivers/s390/scsi/zfcp_dbf.h index 74998ff..a573f73 100644 --- a/drivers/s390/scsi/zfcp_dbf.h +++ b/drivers/s390/scsi/zfcp_dbf.h @@ -25,6 +25,7 @@ #include "zfcp_fsf.h" #define ZFCP_DBF_TAG_SIZE 4 +#define ZFCP_DBF_ID_SIZE 7 struct zfcp_dbf_dump { u8 tag[ZFCP_DBF_TAG_SIZE]; @@ -70,7 +71,7 @@ struct zfcp_rec_dbf_record_action { struct zfcp_rec_dbf_record { u8 id; - u8 id2; + char id2[7]; union { struct zfcp_rec_dbf_record_action action; struct zfcp_rec_dbf_record_thread thread; diff --git a/drivers/s390/scsi/zfcp_erp.c b/drivers/s390/scsi/zfcp_erp.c index 28c7185..65addf6 100644 --- a/drivers/s390/scsi/zfcp_erp.c +++ b/drivers/s390/scsi/zfcp_erp.c @@ -55,7 +55,7 @@ enum zfcp_erp_act_result { static void zfcp_erp_adapter_block(struct zfcp_adapter *adapter, int mask) { - zfcp_erp_modify_adapter_status(adapter, 15, NULL, + zfcp_erp_modify_adapter_status(adapter, "erablk1", NULL, ZFCP_STATUS_COMMON_UNBLOCKED | mask, ZFCP_CLEAR); } @@ -75,9 +75,9 @@ static void zfcp_erp_action_ready(struct zfcp_erp_action *act) struct zfcp_adapter *adapter = act->adapter; list_move(&act->list, &act->adapter->erp_ready_head); - zfcp_rec_dbf_event_action(146, act); + zfcp_rec_dbf_event_action("erardy1", act); up(&adapter->erp_ready_sem); - zfcp_rec_dbf_event_thread(2, adapter); + zfcp_rec_dbf_event_thread("erardy2", adapter); } static void zfcp_erp_action_dismiss(struct zfcp_erp_action *act) @@ -208,7 +208,7 @@ static struct zfcp_erp_action *zfcp_erp_setup_act(int need, static int zfcp_erp_action_enqueue(int want, struct zfcp_adapter *adapter, struct zfcp_port *port, - struct zfcp_unit *unit, u8 id, void *ref) + struct zfcp_unit *unit, char *id, void *ref) { int retval = 1, need; struct zfcp_erp_action *act = NULL; @@ -228,7 +228,7 @@ static int zfcp_erp_action_enqueue(int want, struct zfcp_adapter *adapter, ++adapter->erp_total_count; list_add_tail(&act->list, &adapter->erp_ready_head); up(&adapter->erp_ready_sem); - zfcp_rec_dbf_event_thread(1, adapter); + zfcp_rec_dbf_event_thread("eracte1", adapter); retval = 0; out: zfcp_rec_dbf_event_trigger(id, ref, want, need, act, @@ -237,13 +237,13 @@ static int zfcp_erp_action_enqueue(int want, struct zfcp_adapter *adapter, } static int _zfcp_erp_adapter_reopen(struct zfcp_adapter *adapter, - int clear_mask, u8 id, void *ref) + int clear_mask, char *id, void *ref) { zfcp_erp_adapter_block(adapter, clear_mask); /* ensure propagation of failed status to new devices */ if (atomic_read(&adapter->status) & ZFCP_STATUS_COMMON_ERP_FAILED) { - zfcp_erp_adapter_failed(adapter, 13, NULL); + zfcp_erp_adapter_failed(adapter, "erareo1", NULL); return -EIO; } return zfcp_erp_action_enqueue(ZFCP_ERP_ACTION_REOPEN_ADAPTER, @@ -258,7 +258,7 @@ static int _zfcp_erp_adapter_reopen(struct zfcp_adapter *adapter, * @ref: Reference for debug trace event. */ void zfcp_erp_adapter_reopen(struct zfcp_adapter *adapter, int clear, - u8 id, void *ref) + char *id, void *ref) { unsigned long flags; @@ -277,7 +277,7 @@ void zfcp_erp_adapter_reopen(struct zfcp_adapter *adapter, int clear, * @ref: Reference for debug trace event. */ void zfcp_erp_adapter_shutdown(struct zfcp_adapter *adapter, int clear, - u8 id, void *ref) + char *id, void *ref) { int flags = ZFCP_STATUS_COMMON_RUNNING | ZFCP_STATUS_COMMON_ERP_FAILED; zfcp_erp_adapter_reopen(adapter, clear | flags, id, ref); @@ -290,7 +290,8 @@ void zfcp_erp_adapter_shutdown(struct zfcp_adapter *adapter, int clear, * @id: Id for debug trace event. * @ref: Reference for debug trace event. */ -void zfcp_erp_port_shutdown(struct zfcp_port *port, int clear, u8 id, void *ref) +void zfcp_erp_port_shutdown(struct zfcp_port *port, int clear, char *id, + void *ref) { int flags = ZFCP_STATUS_COMMON_RUNNING | ZFCP_STATUS_COMMON_ERP_FAILED; zfcp_erp_port_reopen(port, clear | flags, id, ref); @@ -303,7 +304,8 @@ void zfcp_erp_port_shutdown(struct zfcp_port *port, int clear, u8 id, void *ref) * @id: Id for debug trace event. * @ref: Reference for debug trace event. */ -void zfcp_erp_unit_shutdown(struct zfcp_unit *unit, int clear, u8 id, void *ref) +void zfcp_erp_unit_shutdown(struct zfcp_unit *unit, int clear, char *id, + void *ref) { int flags = ZFCP_STATUS_COMMON_RUNNING | ZFCP_STATUS_COMMON_ERP_FAILED; zfcp_erp_unit_reopen(unit, clear | flags, id, ref); @@ -311,13 +313,13 @@ void zfcp_erp_unit_shutdown(struct zfcp_unit *unit, int clear, u8 id, void *ref) static void zfcp_erp_port_block(struct zfcp_port *port, int clear) { - zfcp_erp_modify_port_status(port, 17, NULL, + zfcp_erp_modify_port_status(port, "erpblk1", NULL, ZFCP_STATUS_COMMON_UNBLOCKED | clear, ZFCP_CLEAR); } static void _zfcp_erp_port_forced_reopen(struct zfcp_port *port, - int clear, u8 id, void *ref) + int clear, char *id, void *ref) { zfcp_erp_port_block(port, clear); @@ -334,7 +336,7 @@ static void _zfcp_erp_port_forced_reopen(struct zfcp_port *port, * @id: Id for debug trace event. * @ref: Reference for debug trace event. */ -void zfcp_erp_port_forced_reopen(struct zfcp_port *port, int clear, u8 id, +void zfcp_erp_port_forced_reopen(struct zfcp_port *port, int clear, char *id, void *ref) { unsigned long flags; @@ -347,14 +349,14 @@ void zfcp_erp_port_forced_reopen(struct zfcp_port *port, int clear, u8 id, read_unlock_irqrestore(&zfcp_data.config_lock, flags); } -static int _zfcp_erp_port_reopen(struct zfcp_port *port, int clear, u8 id, +static int _zfcp_erp_port_reopen(struct zfcp_port *port, int clear, char *id, void *ref) { zfcp_erp_port_block(port, clear); if (atomic_read(&port->status) & ZFCP_STATUS_COMMON_ERP_FAILED) { /* ensure propagation of failed status to new devices */ - zfcp_erp_port_failed(port, 14, NULL); + zfcp_erp_port_failed(port, "erpreo1", NULL); return -EIO; } @@ -369,7 +371,7 @@ static int _zfcp_erp_port_reopen(struct zfcp_port *port, int clear, u8 id, * * Returns 0 if recovery has been triggered, < 0 if not. */ -int zfcp_erp_port_reopen(struct zfcp_port *port, int clear, u8 id, void *ref) +int zfcp_erp_port_reopen(struct zfcp_port *port, int clear, char *id, void *ref) { unsigned long flags; int retval; @@ -386,12 +388,12 @@ int zfcp_erp_port_reopen(struct zfcp_port *port, int clear, u8 id, void *ref) static void zfcp_erp_unit_block(struct zfcp_unit *unit, int clear_mask) { - zfcp_erp_modify_unit_status(unit, 19, NULL, + zfcp_erp_modify_unit_status(unit, "erublk1", NULL, ZFCP_STATUS_COMMON_UNBLOCKED | clear_mask, ZFCP_CLEAR); } -static void _zfcp_erp_unit_reopen(struct zfcp_unit *unit, int clear, u8 id, +static void _zfcp_erp_unit_reopen(struct zfcp_unit *unit, int clear, char *id, void *ref) { struct zfcp_adapter *adapter = unit->port->adapter; @@ -411,7 +413,8 @@ static void _zfcp_erp_unit_reopen(struct zfcp_unit *unit, int clear, u8 id, * @clear_mask: specifies flags in unit status to be cleared * Return: 0 on success, < 0 on error */ -void zfcp_erp_unit_reopen(struct zfcp_unit *unit, int clear, u8 id, void *ref) +void zfcp_erp_unit_reopen(struct zfcp_unit *unit, int clear, char *id, + void *ref) { unsigned long flags; struct zfcp_port *port = unit->port; @@ -437,28 +440,28 @@ static int status_change_clear(unsigned long mask, atomic_t *status) static void zfcp_erp_adapter_unblock(struct zfcp_adapter *adapter) { if (status_change_set(ZFCP_STATUS_COMMON_UNBLOCKED, &adapter->status)) - zfcp_rec_dbf_event_adapter(16, NULL, adapter); + zfcp_rec_dbf_event_adapter("eraubl1", NULL, adapter); atomic_set_mask(ZFCP_STATUS_COMMON_UNBLOCKED, &adapter->status); } static void zfcp_erp_port_unblock(struct zfcp_port *port) { if (status_change_set(ZFCP_STATUS_COMMON_UNBLOCKED, &port->status)) - zfcp_rec_dbf_event_port(18, NULL, port); + zfcp_rec_dbf_event_port("erpubl1", NULL, port); atomic_set_mask(ZFCP_STATUS_COMMON_UNBLOCKED, &port->status); } static void zfcp_erp_unit_unblock(struct zfcp_unit *unit) { if (status_change_set(ZFCP_STATUS_COMMON_UNBLOCKED, &unit->status)) - zfcp_rec_dbf_event_unit(20, NULL, unit); + zfcp_rec_dbf_event_unit("eruubl1", NULL, unit); atomic_set_mask(ZFCP_STATUS_COMMON_UNBLOCKED, &unit->status); } static void zfcp_erp_action_to_running(struct zfcp_erp_action *erp_action) { list_move(&erp_action->list, &erp_action->adapter->erp_running_head); - zfcp_rec_dbf_event_action(145, erp_action); + zfcp_rec_dbf_event_action("erator1", erp_action); } static void zfcp_erp_strategy_check_fsfreq(struct zfcp_erp_action *act) @@ -474,11 +477,11 @@ static void zfcp_erp_strategy_check_fsfreq(struct zfcp_erp_action *act) if (act->status & (ZFCP_STATUS_ERP_DISMISSED | ZFCP_STATUS_ERP_TIMEDOUT)) { act->fsf_req->status |= ZFCP_STATUS_FSFREQ_DISMISSED; - zfcp_rec_dbf_event_action(142, act); + zfcp_rec_dbf_event_action("erscf_1", act); act->fsf_req->erp_action = NULL; } if (act->status & ZFCP_STATUS_ERP_TIMEDOUT) - zfcp_rec_dbf_event_action(143, act); + zfcp_rec_dbf_event_action("erscf_2", act); if (act->fsf_req->status & (ZFCP_STATUS_FSFREQ_COMPLETED | ZFCP_STATUS_FSFREQ_DISMISSED)) act->fsf_req = NULL; @@ -530,7 +533,7 @@ static void zfcp_erp_strategy_memwait(struct zfcp_erp_action *erp_action) } static void _zfcp_erp_port_reopen_all(struct zfcp_adapter *adapter, - int clear, u8 id, void *ref) + int clear, char *id, void *ref) { struct zfcp_port *port; @@ -538,8 +541,8 @@ static void _zfcp_erp_port_reopen_all(struct zfcp_adapter *adapter, _zfcp_erp_port_reopen(port, clear, id, ref); } -static void _zfcp_erp_unit_reopen_all(struct zfcp_port *port, int clear, u8 id, - void *ref) +static void _zfcp_erp_unit_reopen_all(struct zfcp_port *port, int clear, + char *id, void *ref) { struct zfcp_unit *unit; @@ -559,28 +562,28 @@ static void zfcp_erp_strategy_followup_actions(struct zfcp_erp_action *act) case ZFCP_ERP_ACTION_REOPEN_ADAPTER: if (status == ZFCP_ERP_SUCCEEDED) - _zfcp_erp_port_reopen_all(adapter, 0, 70, NULL); + _zfcp_erp_port_reopen_all(adapter, 0, "ersfa_1", NULL); else - _zfcp_erp_adapter_reopen(adapter, 0, 71, NULL); + _zfcp_erp_adapter_reopen(adapter, 0, "ersfa_2", NULL); break; case ZFCP_ERP_ACTION_REOPEN_PORT_FORCED: if (status == ZFCP_ERP_SUCCEEDED) - _zfcp_erp_port_reopen(port, 0, 72, NULL); + _zfcp_erp_port_reopen(port, 0, "ersfa_3", NULL); else - _zfcp_erp_adapter_reopen(adapter, 0, 73, NULL); + _zfcp_erp_adapter_reopen(adapter, 0, "ersfa_4", NULL); break; case ZFCP_ERP_ACTION_REOPEN_PORT: if (status == ZFCP_ERP_SUCCEEDED) - _zfcp_erp_unit_reopen_all(port, 0, 74, NULL); + _zfcp_erp_unit_reopen_all(port, 0, "ersfa_5", NULL); else - _zfcp_erp_port_forced_reopen(port, 0, 75, NULL); + _zfcp_erp_port_forced_reopen(port, 0, "ersfa_6", NULL); break; case ZFCP_ERP_ACTION_REOPEN_UNIT: if (status != ZFCP_ERP_SUCCEEDED) - _zfcp_erp_port_reopen(unit->port, 0, 76, NULL); + _zfcp_erp_port_reopen(unit->port, 0, "ersfa_7", NULL); break; } } @@ -617,7 +620,7 @@ static void zfcp_erp_enqueue_ptp_port(struct zfcp_adapter *adapter) adapter->peer_d_id); if (IS_ERR(port)) /* error or port already attached */ return; - _zfcp_erp_port_reopen(port, 0, 150, NULL); + _zfcp_erp_port_reopen(port, 0, "ereptp1", NULL); } static int zfcp_erp_adapter_strat_fsf_xconf(struct zfcp_erp_action *erp_action) @@ -640,9 +643,9 @@ static int zfcp_erp_adapter_strat_fsf_xconf(struct zfcp_erp_action *erp_action) return ZFCP_ERP_FAILED; } - zfcp_rec_dbf_event_thread_lock(6, adapter); + zfcp_rec_dbf_event_thread_lock("erasfx1", adapter); down(&adapter->erp_ready_sem); - zfcp_rec_dbf_event_thread_lock(7, adapter); + zfcp_rec_dbf_event_thread_lock("erasfx2", adapter); if (erp_action->status & ZFCP_STATUS_ERP_TIMEDOUT) break; @@ -681,9 +684,9 @@ static int zfcp_erp_adapter_strategy_open_fsf_xport(struct zfcp_erp_action *act) if (ret) return ZFCP_ERP_FAILED; - zfcp_rec_dbf_event_thread_lock(8, adapter); + zfcp_rec_dbf_event_thread_lock("erasox1", adapter); down(&adapter->erp_ready_sem); - zfcp_rec_dbf_event_thread_lock(9, adapter); + zfcp_rec_dbf_event_thread_lock("erasox2", adapter); if (act->status & ZFCP_STATUS_ERP_TIMEDOUT) return ZFCP_ERP_FAILED; @@ -714,7 +717,7 @@ static void zfcp_erp_adapter_strategy_close(struct zfcp_erp_action *act) zfcp_fsf_req_dismiss_all(adapter); adapter->fsf_req_seq_no = 0; /* all ports and units are closed */ - zfcp_erp_modify_adapter_status(adapter, 24, NULL, + zfcp_erp_modify_adapter_status(adapter, "erascl1", NULL, ZFCP_STATUS_COMMON_OPEN, ZFCP_CLEAR); atomic_clear_mask(ZFCP_STATUS_ADAPTER_XCONFIG_OK | @@ -832,7 +835,7 @@ static int zfcp_erp_open_ptp_port(struct zfcp_erp_action *act) struct zfcp_port *port = act->port; if (port->wwpn != adapter->peer_wwpn) { - zfcp_erp_port_failed(port, 25, NULL); + zfcp_erp_port_failed(port, "eroptp1", NULL); return ZFCP_ERP_FAILED; } port->d_id = adapter->peer_d_id; @@ -986,7 +989,7 @@ static int zfcp_erp_strategy_check_unit(struct zfcp_unit *unit, int result) "port 0x%016Lx\n", (unsigned long long)unit->fcp_lun, (unsigned long long)unit->port->wwpn); - zfcp_erp_unit_failed(unit, 21, NULL); + zfcp_erp_unit_failed(unit, "erusck1", NULL); } break; } @@ -1016,7 +1019,7 @@ static int zfcp_erp_strategy_check_port(struct zfcp_port *port, int result) dev_err(&port->adapter->ccw_device->dev, "ERP failed for remote port 0x%016Lx\n", (unsigned long long)port->wwpn); - zfcp_erp_port_failed(port, 22, NULL); + zfcp_erp_port_failed(port, "erpsck1", NULL); } break; } @@ -1043,7 +1046,7 @@ static int zfcp_erp_strategy_check_adapter(struct zfcp_adapter *adapter, dev_err(&adapter->ccw_device->dev, "ERP cannot recover an error " "on the FCP device\n"); - zfcp_erp_adapter_failed(adapter, 23, NULL); + zfcp_erp_adapter_failed(adapter, "erasck1", NULL); } break; } @@ -1108,7 +1111,7 @@ static int zfcp_erp_strategy_statechange(struct zfcp_erp_action *act, int ret) if (zfcp_erp_strat_change_det(&adapter->status, erp_status)) { _zfcp_erp_adapter_reopen(adapter, ZFCP_STATUS_COMMON_ERP_FAILED, - 67, NULL); + "ersscg1", NULL); return ZFCP_ERP_EXIT; } break; @@ -1118,7 +1121,7 @@ static int zfcp_erp_strategy_statechange(struct zfcp_erp_action *act, int ret) if (zfcp_erp_strat_change_det(&port->status, erp_status)) { _zfcp_erp_port_reopen(port, ZFCP_STATUS_COMMON_ERP_FAILED, - 68, NULL); + "ersscg2", NULL); return ZFCP_ERP_EXIT; } break; @@ -1127,7 +1130,7 @@ static int zfcp_erp_strategy_statechange(struct zfcp_erp_action *act, int ret) if (zfcp_erp_strat_change_det(&unit->status, erp_status)) { _zfcp_erp_unit_reopen(unit, ZFCP_STATUS_COMMON_ERP_FAILED, - 69, NULL); + "ersscg3", NULL); return ZFCP_ERP_EXIT; } break; @@ -1146,7 +1149,7 @@ static void zfcp_erp_action_dequeue(struct zfcp_erp_action *erp_action) } list_del(&erp_action->list); - zfcp_rec_dbf_event_action(144, erp_action); + zfcp_rec_dbf_event_action("eractd1", erp_action); switch (erp_action->action) { case ZFCP_ERP_ACTION_REOPEN_UNIT: @@ -1331,7 +1334,7 @@ static int zfcp_erp_strategy(struct zfcp_erp_action *erp_action) erp_action->status |= ZFCP_STATUS_ERP_LOWMEM; } if (adapter->erp_total_count == adapter->erp_low_mem_count) - _zfcp_erp_adapter_reopen(adapter, 0, 66, NULL); + _zfcp_erp_adapter_reopen(adapter, 0, "erstgy1", NULL); else { zfcp_erp_strategy_memwait(erp_action); retval = ZFCP_ERP_CONTINUES; @@ -1391,9 +1394,9 @@ static int zfcp_erp_thread(void *data) zfcp_erp_wakeup(adapter); } - zfcp_rec_dbf_event_thread_lock(4, adapter); + zfcp_rec_dbf_event_thread_lock("erthrd1", adapter); ignore = down_interruptible(&adapter->erp_ready_sem); - zfcp_rec_dbf_event_thread_lock(5, adapter); + zfcp_rec_dbf_event_thread_lock("erthrd2", adapter); } atomic_clear_mask(ZFCP_STATUS_ADAPTER_ERP_THREAD_UP, &adapter->status); @@ -1438,7 +1441,7 @@ void zfcp_erp_thread_kill(struct zfcp_adapter *adapter) { atomic_set_mask(ZFCP_STATUS_ADAPTER_ERP_THREAD_KILL, &adapter->status); up(&adapter->erp_ready_sem); - zfcp_rec_dbf_event_thread_lock(3, adapter); + zfcp_rec_dbf_event_thread_lock("erthrk1", adapter); wait_event(adapter->erp_thread_wqh, !(atomic_read(&adapter->status) & @@ -1454,7 +1457,7 @@ void zfcp_erp_thread_kill(struct zfcp_adapter *adapter) * @id: Event id for debug trace. * @ref: Reference for debug trace. */ -void zfcp_erp_adapter_failed(struct zfcp_adapter *adapter, u8 id, void *ref) +void zfcp_erp_adapter_failed(struct zfcp_adapter *adapter, char *id, void *ref) { zfcp_erp_modify_adapter_status(adapter, id, ref, ZFCP_STATUS_COMMON_ERP_FAILED, ZFCP_SET); @@ -1466,7 +1469,7 @@ void zfcp_erp_adapter_failed(struct zfcp_adapter *adapter, u8 id, void *ref) * @id: Event id for debug trace. * @ref: Reference for debug trace. */ -void zfcp_erp_port_failed(struct zfcp_port *port, u8 id, void *ref) +void zfcp_erp_port_failed(struct zfcp_port *port, char *id, void *ref) { zfcp_erp_modify_port_status(port, id, ref, ZFCP_STATUS_COMMON_ERP_FAILED, ZFCP_SET); @@ -1478,7 +1481,7 @@ void zfcp_erp_port_failed(struct zfcp_port *port, u8 id, void *ref) * @id: Event id for debug trace. * @ref: Reference for debug trace. */ -void zfcp_erp_unit_failed(struct zfcp_unit *unit, u8 id, void *ref) +void zfcp_erp_unit_failed(struct zfcp_unit *unit, char *id, void *ref) { zfcp_erp_modify_unit_status(unit, id, ref, ZFCP_STATUS_COMMON_ERP_FAILED, ZFCP_SET); @@ -1505,7 +1508,7 @@ void zfcp_erp_wait(struct zfcp_adapter *adapter) * * Changes in common status bits are propagated to attached ports and units. */ -void zfcp_erp_modify_adapter_status(struct zfcp_adapter *adapter, u8 id, +void zfcp_erp_modify_adapter_status(struct zfcp_adapter *adapter, char *id, void *ref, u32 mask, int set_or_clear) { struct zfcp_port *port; @@ -1539,7 +1542,7 @@ void zfcp_erp_modify_adapter_status(struct zfcp_adapter *adapter, u8 id, * * Changes in common status bits are propagated to attached units. */ -void zfcp_erp_modify_port_status(struct zfcp_port *port, u8 id, void *ref, +void zfcp_erp_modify_port_status(struct zfcp_port *port, char *id, void *ref, u32 mask, int set_or_clear) { struct zfcp_unit *unit; @@ -1571,7 +1574,7 @@ void zfcp_erp_modify_port_status(struct zfcp_port *port, u8 id, void *ref, * @mask: status bits to change * @set_or_clear: ZFCP_SET or ZFCP_CLEAR */ -void zfcp_erp_modify_unit_status(struct zfcp_unit *unit, u8 id, void *ref, +void zfcp_erp_modify_unit_status(struct zfcp_unit *unit, char *id, void *ref, u32 mask, int set_or_clear) { if (set_or_clear == ZFCP_SET) { @@ -1594,7 +1597,7 @@ void zfcp_erp_modify_unit_status(struct zfcp_unit *unit, u8 id, void *ref, * @id: The debug trace id. * @id: Reference for the debug trace. */ -void zfcp_erp_port_boxed(struct zfcp_port *port, u8 id, void *ref) +void zfcp_erp_port_boxed(struct zfcp_port *port, char *id, void *ref) { unsigned long flags; @@ -1611,7 +1614,7 @@ void zfcp_erp_port_boxed(struct zfcp_port *port, u8 id, void *ref) * @id: The debug trace id. * @id: Reference for the debug trace. */ -void zfcp_erp_unit_boxed(struct zfcp_unit *unit, u8 id, void *ref) +void zfcp_erp_unit_boxed(struct zfcp_unit *unit, char *id, void *ref) { zfcp_erp_modify_unit_status(unit, id, ref, ZFCP_STATUS_COMMON_ACCESS_BOXED, ZFCP_SET); @@ -1627,7 +1630,7 @@ void zfcp_erp_unit_boxed(struct zfcp_unit *unit, u8 id, void *ref) * Since the adapter has denied access, stop using the port and the * attached units. */ -void zfcp_erp_port_access_denied(struct zfcp_port *port, u8 id, void *ref) +void zfcp_erp_port_access_denied(struct zfcp_port *port, char *id, void *ref) { unsigned long flags; @@ -1646,14 +1649,14 @@ void zfcp_erp_port_access_denied(struct zfcp_port *port, u8 id, void *ref) * * Since the adapter has denied access, stop using the unit. */ -void zfcp_erp_unit_access_denied(struct zfcp_unit *unit, u8 id, void *ref) +void zfcp_erp_unit_access_denied(struct zfcp_unit *unit, char *id, void *ref) { zfcp_erp_modify_unit_status(unit, id, ref, ZFCP_STATUS_COMMON_ERP_FAILED | ZFCP_STATUS_COMMON_ACCESS_DENIED, ZFCP_SET); } -static void zfcp_erp_unit_access_changed(struct zfcp_unit *unit, u8 id, +static void zfcp_erp_unit_access_changed(struct zfcp_unit *unit, char *id, void *ref) { int status = atomic_read(&unit->status); @@ -1664,7 +1667,7 @@ static void zfcp_erp_unit_access_changed(struct zfcp_unit *unit, u8 id, zfcp_erp_unit_reopen(unit, ZFCP_STATUS_COMMON_ERP_FAILED, id, ref); } -static void zfcp_erp_port_access_changed(struct zfcp_port *port, u8 id, +static void zfcp_erp_port_access_changed(struct zfcp_port *port, char *id, void *ref) { struct zfcp_unit *unit; @@ -1686,7 +1689,7 @@ static void zfcp_erp_port_access_changed(struct zfcp_port *port, u8 id, * @id: Id for debug trace * @ref: Reference for debug trace */ -void zfcp_erp_adapter_access_changed(struct zfcp_adapter *adapter, u8 id, +void zfcp_erp_adapter_access_changed(struct zfcp_adapter *adapter, char *id, void *ref) { struct zfcp_port *port; diff --git a/drivers/s390/scsi/zfcp_ext.h b/drivers/s390/scsi/zfcp_ext.h index a2b4987..569d243 100644 --- a/drivers/s390/scsi/zfcp_ext.h +++ b/drivers/s390/scsi/zfcp_ext.h @@ -35,15 +35,15 @@ extern struct miscdevice zfcp_cfdc_misc; /* zfcp_dbf.c */ extern int zfcp_adapter_debug_register(struct zfcp_adapter *); extern void zfcp_adapter_debug_unregister(struct zfcp_adapter *); -extern void zfcp_rec_dbf_event_thread(u8, struct zfcp_adapter *); -extern void zfcp_rec_dbf_event_thread_lock(u8, struct zfcp_adapter *); -extern void zfcp_rec_dbf_event_adapter(u8, void *, struct zfcp_adapter *); -extern void zfcp_rec_dbf_event_port(u8, void *, struct zfcp_port *); -extern void zfcp_rec_dbf_event_unit(u8, void *, struct zfcp_unit *); -extern void zfcp_rec_dbf_event_trigger(u8, void *, u8, u8, void *, +extern void zfcp_rec_dbf_event_thread(char *, struct zfcp_adapter *); +extern void zfcp_rec_dbf_event_thread_lock(char *, struct zfcp_adapter *); +extern void zfcp_rec_dbf_event_adapter(char *, void *, struct zfcp_adapter *); +extern void zfcp_rec_dbf_event_port(char *, void *, struct zfcp_port *); +extern void zfcp_rec_dbf_event_unit(char *, void *, struct zfcp_unit *); +extern void zfcp_rec_dbf_event_trigger(char *, void *, u8, u8, void *, struct zfcp_adapter *, struct zfcp_port *, struct zfcp_unit *); -extern void zfcp_rec_dbf_event_action(u8, struct zfcp_erp_action *); +extern void zfcp_rec_dbf_event_action(char *, struct zfcp_erp_action *); extern void zfcp_hba_dbf_event_fsf_response(struct zfcp_fsf_req *); extern void zfcp_hba_dbf_event_fsf_unsol(const char *, struct zfcp_adapter *, struct fsf_status_read_buffer *); @@ -66,31 +66,34 @@ extern void zfcp_scsi_dbf_event_devreset(const char *, u8, struct zfcp_unit *, struct scsi_cmnd *); /* zfcp_erp.c */ -extern void zfcp_erp_modify_adapter_status(struct zfcp_adapter *, u8, void *, - u32, int); -extern void zfcp_erp_adapter_reopen(struct zfcp_adapter *, int, u8, void *); -extern void zfcp_erp_adapter_shutdown(struct zfcp_adapter *, int, u8, void *); -extern void zfcp_erp_adapter_failed(struct zfcp_adapter *, u8, void *); -extern void zfcp_erp_modify_port_status(struct zfcp_port *, u8, void *, u32, +extern void zfcp_erp_modify_adapter_status(struct zfcp_adapter *, char *, + void *, u32, int); +extern void zfcp_erp_adapter_reopen(struct zfcp_adapter *, int, char *, void *); +extern void zfcp_erp_adapter_shutdown(struct zfcp_adapter *, int, char *, + void *); +extern void zfcp_erp_adapter_failed(struct zfcp_adapter *, char *, void *); +extern void zfcp_erp_modify_port_status(struct zfcp_port *, char *, void *, u32, int); -extern int zfcp_erp_port_reopen(struct zfcp_port *, int, u8, void *); -extern void zfcp_erp_port_shutdown(struct zfcp_port *, int, u8, void *); -extern void zfcp_erp_port_forced_reopen(struct zfcp_port *, int, u8, void *); -extern void zfcp_erp_port_failed(struct zfcp_port *, u8, void *); -extern void zfcp_erp_modify_unit_status(struct zfcp_unit *, u8, void *, u32, +extern int zfcp_erp_port_reopen(struct zfcp_port *, int, char *, void *); +extern void zfcp_erp_port_shutdown(struct zfcp_port *, int, char *, void *); +extern void zfcp_erp_port_forced_reopen(struct zfcp_port *, int, char *, + void *); +extern void zfcp_erp_port_failed(struct zfcp_port *, char *, void *); +extern void zfcp_erp_modify_unit_status(struct zfcp_unit *, char *, void *, u32, int); -extern void zfcp_erp_unit_reopen(struct zfcp_unit *, int, u8, void *); -extern void zfcp_erp_unit_shutdown(struct zfcp_unit *, int, u8, void *); -extern void zfcp_erp_unit_failed(struct zfcp_unit *, u8, void *); +extern void zfcp_erp_unit_reopen(struct zfcp_unit *, int, char *, void *); +extern void zfcp_erp_unit_shutdown(struct zfcp_unit *, int, char *, void *); +extern void zfcp_erp_unit_failed(struct zfcp_unit *, char *, void *); extern int zfcp_erp_thread_setup(struct zfcp_adapter *); extern void zfcp_erp_thread_kill(struct zfcp_adapter *); extern void zfcp_erp_wait(struct zfcp_adapter *); extern void zfcp_erp_notify(struct zfcp_erp_action *, unsigned long); -extern void zfcp_erp_port_boxed(struct zfcp_port *, u8, void *); -extern void zfcp_erp_unit_boxed(struct zfcp_unit *, u8, void *); -extern void zfcp_erp_port_access_denied(struct zfcp_port *, u8, void *); -extern void zfcp_erp_unit_access_denied(struct zfcp_unit *, u8, void *); -extern void zfcp_erp_adapter_access_changed(struct zfcp_adapter *, u8, void *); +extern void zfcp_erp_port_boxed(struct zfcp_port *, char *, void *); +extern void zfcp_erp_unit_boxed(struct zfcp_unit *, char *, void *); +extern void zfcp_erp_port_access_denied(struct zfcp_port *, char *, void *); +extern void zfcp_erp_unit_access_denied(struct zfcp_unit *, char *, void *); +extern void zfcp_erp_adapter_access_changed(struct zfcp_adapter *, char *, + void *); extern void zfcp_erp_timeout_handler(unsigned long); extern void zfcp_erp_port_strategy_open_lookup(struct work_struct *); diff --git a/drivers/s390/scsi/zfcp_fc.c b/drivers/s390/scsi/zfcp_fc.c index 0f435ed..ec700b3 100644 --- a/drivers/s390/scsi/zfcp_fc.c +++ b/drivers/s390/scsi/zfcp_fc.c @@ -150,7 +150,7 @@ static void _zfcp_fc_incoming_rscn(struct zfcp_fsf_req *fsf_req, u32 range, /* Try to connect to unused ports anyway. */ zfcp_erp_port_reopen(port, ZFCP_STATUS_COMMON_ERP_FAILED, - 82, fsf_req); + "fcirsc1", fsf_req); else if ((port->d_id & range) == (elem->nport_did & range)) /* Check connection status for connected ports */ zfcp_test_link(port); @@ -196,7 +196,7 @@ static void zfcp_fc_incoming_wwpn(struct zfcp_fsf_req *req, u64 wwpn) read_unlock_irqrestore(&zfcp_data.config_lock, flags); if (port && (port->wwpn == wwpn)) - zfcp_erp_port_forced_reopen(port, 0, 83, req); + zfcp_erp_port_forced_reopen(port, 0, "fciwwp1", req); } static void zfcp_fc_incoming_plogi(struct zfcp_fsf_req *req) @@ -374,7 +374,7 @@ static void zfcp_fc_adisc_handler(unsigned long data) if (adisc->els.status) { /* request rejected or timed out */ - zfcp_erp_port_forced_reopen(port, 0, 63, NULL); + zfcp_erp_port_forced_reopen(port, 0, "fcadh_1", NULL); goto out; } @@ -382,7 +382,7 @@ static void zfcp_fc_adisc_handler(unsigned long data) port->wwnn = ls_adisc->wwnn; if (port->wwpn != ls_adisc->wwpn) - zfcp_erp_port_reopen(port, 0, 64, NULL); + zfcp_erp_port_reopen(port, 0, "fcadh_2", NULL); out: zfcp_port_put(port); @@ -434,7 +434,7 @@ void zfcp_fc_link_test_work(struct work_struct *work) /* send of ADISC was not possible */ zfcp_port_put(port); if (retval != -EBUSY) - zfcp_erp_port_forced_reopen(port, 0, 65, NULL); + zfcp_erp_port_forced_reopen(port, 0, "fcltwk1", NULL); } /** @@ -536,7 +536,7 @@ static void zfcp_validate_port(struct zfcp_port *port) zfcp_port_put(port); return; } - zfcp_erp_port_shutdown(port, 0, 151, NULL); + zfcp_erp_port_shutdown(port, 0, "fcpval1", NULL); zfcp_erp_wait(adapter); zfcp_port_put(port); zfcp_port_dequeue(port); @@ -599,7 +599,7 @@ static int zfcp_scan_eval_gpn_ft(struct zfcp_gpn_ft *gpn_ft, int max_entries) if (IS_ERR(port)) ret = PTR_ERR(port); else - zfcp_erp_port_reopen(port, 0, 149, NULL); + zfcp_erp_port_reopen(port, 0, "fcegpf1", NULL); } zfcp_erp_wait(adapter); diff --git a/drivers/s390/scsi/zfcp_fsf.c b/drivers/s390/scsi/zfcp_fsf.c index 698e422..b4c9ba0 100644 --- a/drivers/s390/scsi/zfcp_fsf.c +++ b/drivers/s390/scsi/zfcp_fsf.c @@ -18,8 +18,8 @@ static void zfcp_fsf_request_timeout_handler(unsigned long data) { struct zfcp_adapter *adapter = (struct zfcp_adapter *) data; - zfcp_erp_adapter_reopen(adapter, ZFCP_STATUS_COMMON_ERP_FAILED, 62, - NULL); + zfcp_erp_adapter_reopen(adapter, ZFCP_STATUS_COMMON_ERP_FAILED, + "fsrth_1", NULL); } static void zfcp_fsf_start_timer(struct zfcp_fsf_req *fsf_req, @@ -78,7 +78,7 @@ static void zfcp_fsf_access_denied_port(struct zfcp_fsf_req *req, (unsigned long long)port->wwpn); zfcp_act_eval_err(req->adapter, header->fsf_status_qual.halfword[0]); zfcp_act_eval_err(req->adapter, header->fsf_status_qual.halfword[1]); - zfcp_erp_port_access_denied(port, 55, req); + zfcp_erp_port_access_denied(port, "fspad_1", req); req->status |= ZFCP_STATUS_FSFREQ_ERROR; } @@ -92,7 +92,7 @@ static void zfcp_fsf_access_denied_unit(struct zfcp_fsf_req *req, (unsigned long long)unit->port->wwpn); zfcp_act_eval_err(req->adapter, header->fsf_status_qual.halfword[0]); zfcp_act_eval_err(req->adapter, header->fsf_status_qual.halfword[1]); - zfcp_erp_unit_access_denied(unit, 59, req); + zfcp_erp_unit_access_denied(unit, "fsuad_1", req); req->status |= ZFCP_STATUS_FSFREQ_ERROR; } @@ -100,7 +100,7 @@ static void zfcp_fsf_class_not_supp(struct zfcp_fsf_req *req) { dev_err(&req->adapter->ccw_device->dev, "FCP device not " "operational because of an unsupported FC class\n"); - zfcp_erp_adapter_shutdown(req->adapter, 0, 123, req); + zfcp_erp_adapter_shutdown(req->adapter, 0, "fscns_1", req); req->status |= ZFCP_STATUS_FSFREQ_ERROR; } @@ -162,13 +162,13 @@ static void zfcp_fsf_status_read_port_closed(struct zfcp_fsf_req *req) list_for_each_entry(port, &adapter->port_list_head, list) if (port->d_id == d_id) { read_unlock_irqrestore(&zfcp_data.config_lock, flags); - zfcp_erp_port_reopen(port, 0, 101, req); + zfcp_erp_port_reopen(port, 0, "fssrpc1", req); return; } read_unlock_irqrestore(&zfcp_data.config_lock, flags); } -static void zfcp_fsf_link_down_info_eval(struct zfcp_fsf_req *req, u8 id, +static void zfcp_fsf_link_down_info_eval(struct zfcp_fsf_req *req, char *id, struct fsf_link_down_info *link_down) { struct zfcp_adapter *adapter = req->adapter; @@ -257,13 +257,13 @@ static void zfcp_fsf_status_read_link_down(struct zfcp_fsf_req *req) switch (sr_buf->status_subtype) { case FSF_STATUS_READ_SUB_NO_PHYSICAL_LINK: - zfcp_fsf_link_down_info_eval(req, 38, ldi); + zfcp_fsf_link_down_info_eval(req, "fssrld1", ldi); break; case FSF_STATUS_READ_SUB_FDISC_FAILED: - zfcp_fsf_link_down_info_eval(req, 39, ldi); + zfcp_fsf_link_down_info_eval(req, "fssrld2", ldi); break; case FSF_STATUS_READ_SUB_FIRMWARE_UPDATE: - zfcp_fsf_link_down_info_eval(req, 40, NULL); + zfcp_fsf_link_down_info_eval(req, "fssrld3", NULL); }; } @@ -303,22 +303,23 @@ static void zfcp_fsf_status_read_handler(struct zfcp_fsf_req *req) dev_info(&adapter->ccw_device->dev, "The local link has been restored\n"); /* All ports should be marked as ready to run again */ - zfcp_erp_modify_adapter_status(adapter, 30, NULL, + zfcp_erp_modify_adapter_status(adapter, "fssrh_1", NULL, ZFCP_STATUS_COMMON_RUNNING, ZFCP_SET); zfcp_erp_adapter_reopen(adapter, ZFCP_STATUS_ADAPTER_LINK_UNPLUGGED | ZFCP_STATUS_COMMON_ERP_FAILED, - 102, req); + "fssrh_2", req); break; case FSF_STATUS_READ_NOTIFICATION_LOST: if (sr_buf->status_subtype & FSF_STATUS_READ_SUB_ACT_UPDATED) - zfcp_erp_adapter_access_changed(adapter, 135, req); + zfcp_erp_adapter_access_changed(adapter, "fssrh_3", + req); if (sr_buf->status_subtype & FSF_STATUS_READ_SUB_INCOMING_ELS) schedule_work(&adapter->scan_work); break; case FSF_STATUS_READ_CFDC_UPDATED: - zfcp_erp_adapter_access_changed(adapter, 136, req); + zfcp_erp_adapter_access_changed(adapter, "fssrh_4", req); break; case FSF_STATUS_READ_FEATURE_UPDATE_ALERT: adapter->adapter_features = sr_buf->payload.word[0]; @@ -347,7 +348,7 @@ static void zfcp_fsf_fsfstatus_qual_eval(struct zfcp_fsf_req *req) dev_err(&req->adapter->ccw_device->dev, "The FCP adapter reported a problem " "that cannot be recovered\n"); - zfcp_erp_adapter_shutdown(req->adapter, 0, 121, req); + zfcp_erp_adapter_shutdown(req->adapter, 0, "fsfsqe1", req); break; } /* all non-return stats set FSFREQ_ERROR*/ @@ -364,7 +365,7 @@ static void zfcp_fsf_fsfstatus_eval(struct zfcp_fsf_req *req) dev_err(&req->adapter->ccw_device->dev, "The FCP adapter does not recognize the command 0x%x\n", req->qtcb->header.fsf_command); - zfcp_erp_adapter_shutdown(req->adapter, 0, 120, req); + zfcp_erp_adapter_shutdown(req->adapter, 0, "fsfse_1", req); req->status |= ZFCP_STATUS_FSFREQ_ERROR; break; case FSF_ADAPTER_STATUS_AVAILABLE: @@ -396,17 +397,17 @@ static void zfcp_fsf_protstatus_eval(struct zfcp_fsf_req *req) "QTCB version 0x%x not supported by FCP adapter " "(0x%x to 0x%x)\n", FSF_QTCB_CURRENT_VERSION, psq->word[0], psq->word[1]); - zfcp_erp_adapter_shutdown(adapter, 0, 117, req); + zfcp_erp_adapter_shutdown(adapter, 0, "fspse_1", req); break; case FSF_PROT_ERROR_STATE: case FSF_PROT_SEQ_NUMB_ERROR: - zfcp_erp_adapter_reopen(adapter, 0, 98, req); + zfcp_erp_adapter_reopen(adapter, 0, "fspse_2", req); req->status |= ZFCP_STATUS_FSFREQ_RETRY; break; case FSF_PROT_UNSUPP_QTCB_TYPE: dev_err(&adapter->ccw_device->dev, "The QTCB type is not supported by the FCP adapter\n"); - zfcp_erp_adapter_shutdown(adapter, 0, 118, req); + zfcp_erp_adapter_shutdown(adapter, 0, "fspse_3", req); break; case FSF_PROT_HOST_CONNECTION_INITIALIZING: atomic_set_mask(ZFCP_STATUS_ADAPTER_HOST_CON_INIT, @@ -416,27 +417,29 @@ static void zfcp_fsf_protstatus_eval(struct zfcp_fsf_req *req) dev_err(&adapter->ccw_device->dev, "0x%Lx is an ambiguous request identifier\n", (unsigned long long)qtcb->bottom.support.req_handle); - zfcp_erp_adapter_shutdown(adapter, 0, 78, req); + zfcp_erp_adapter_shutdown(adapter, 0, "fspse_4", req); break; case FSF_PROT_LINK_DOWN: - zfcp_fsf_link_down_info_eval(req, 37, &psq->link_down_info); + zfcp_fsf_link_down_info_eval(req, "fspse_5", + &psq->link_down_info); /* FIXME: reopening adapter now? better wait for link up */ - zfcp_erp_adapter_reopen(adapter, 0, 79, req); + zfcp_erp_adapter_reopen(adapter, 0, "fspse_6", req); break; case FSF_PROT_REEST_QUEUE: /* All ports should be marked as ready to run again */ - zfcp_erp_modify_adapter_status(adapter, 28, NULL, + zfcp_erp_modify_adapter_status(adapter, "fspse_7", NULL, ZFCP_STATUS_COMMON_RUNNING, ZFCP_SET); zfcp_erp_adapter_reopen(adapter, ZFCP_STATUS_ADAPTER_LINK_UNPLUGGED | - ZFCP_STATUS_COMMON_ERP_FAILED, 99, req); + ZFCP_STATUS_COMMON_ERP_FAILED, + "fspse_8", req); break; default: dev_err(&adapter->ccw_device->dev, "0x%x is not a valid transfer protocol status\n", qtcb->prefix.prot_status); - zfcp_erp_adapter_shutdown(adapter, 0, 119, req); + zfcp_erp_adapter_shutdown(adapter, 0, "fspse_9", req); } req->status |= ZFCP_STATUS_FSFREQ_ERROR; } @@ -522,7 +525,7 @@ static int zfcp_fsf_exchange_config_evaluate(struct zfcp_fsf_req *req) dev_err(&adapter->ccw_device->dev, "Unknown or unsupported arbitrated loop " "fibre channel topology detected\n"); - zfcp_erp_adapter_shutdown(adapter, 0, 127, req); + zfcp_erp_adapter_shutdown(adapter, 0, "fsece_1", req); return -EIO; } @@ -556,7 +559,7 @@ static void zfcp_fsf_exchange_config_data_handler(struct zfcp_fsf_req *req) "FCP adapter maximum QTCB size (%d bytes) " "is too small\n", bottom->max_qtcb_size); - zfcp_erp_adapter_shutdown(adapter, 0, 129, req); + zfcp_erp_adapter_shutdown(adapter, 0, "fsecdh1", req); return; } atomic_set_mask(ZFCP_STATUS_ADAPTER_XCONFIG_OK, @@ -573,11 +576,11 @@ static void zfcp_fsf_exchange_config_data_handler(struct zfcp_fsf_req *req) atomic_set_mask(ZFCP_STATUS_ADAPTER_XCONFIG_OK, &adapter->status); - zfcp_fsf_link_down_info_eval(req, 42, + zfcp_fsf_link_down_info_eval(req, "fsecdh2", &qtcb->header.fsf_status_qual.link_down_info); break; default: - zfcp_erp_adapter_shutdown(adapter, 0, 130, req); + zfcp_erp_adapter_shutdown(adapter, 0, "fsecdh3", req); return; } @@ -593,14 +596,14 @@ static void zfcp_fsf_exchange_config_data_handler(struct zfcp_fsf_req *req) dev_err(&adapter->ccw_device->dev, "The FCP adapter only supports newer " "control block versions\n"); - zfcp_erp_adapter_shutdown(adapter, 0, 125, req); + zfcp_erp_adapter_shutdown(adapter, 0, "fsecdh4", req); return; } if (FSF_QTCB_CURRENT_VERSION > bottom->high_qtcb_version) { dev_err(&adapter->ccw_device->dev, "The FCP adapter only supports older " "control block versions\n"); - zfcp_erp_adapter_shutdown(adapter, 0, 126, req); + zfcp_erp_adapter_shutdown(adapter, 0, "fsecdh5", req); } } @@ -634,7 +637,7 @@ static void zfcp_fsf_exchange_port_data_handler(struct zfcp_fsf_req *req) break; case FSF_EXCHANGE_CONFIG_DATA_INCOMPLETE: zfcp_fsf_exchange_port_evaluate(req); - zfcp_fsf_link_down_info_eval(req, 43, + zfcp_fsf_link_down_info_eval(req, "fsepdh1", &qtcb->header.fsf_status_qual.link_down_info); break; } @@ -779,7 +782,7 @@ static int zfcp_fsf_req_send(struct zfcp_fsf_req *req) if (zfcp_reqlist_find_safe(adapter, req)) zfcp_reqlist_remove(adapter, req); spin_unlock_irqrestore(&adapter->req_list_lock, flags); - zfcp_erp_adapter_reopen(adapter, 0, 116, req); + zfcp_erp_adapter_reopen(adapter, 0, "fsrs__1", req); return -EIO; } @@ -859,14 +862,14 @@ static void zfcp_fsf_abort_fcp_command_handler(struct zfcp_fsf_req *req) switch (req->qtcb->header.fsf_status) { case FSF_PORT_HANDLE_NOT_VALID: if (fsq->word[0] == fsq->word[1]) { - zfcp_erp_adapter_reopen(unit->port->adapter, 0, 104, - req); + zfcp_erp_adapter_reopen(unit->port->adapter, 0, + "fsafch1", req); req->status |= ZFCP_STATUS_FSFREQ_ERROR; } break; case FSF_LUN_HANDLE_NOT_VALID: if (fsq->word[0] == fsq->word[1]) { - zfcp_erp_port_reopen(unit->port, 0, 105, req); + zfcp_erp_port_reopen(unit->port, 0, "fsafch2", req); req->status |= ZFCP_STATUS_FSFREQ_ERROR; } break; @@ -874,12 +877,12 @@ static void zfcp_fsf_abort_fcp_command_handler(struct zfcp_fsf_req *req) req->status |= ZFCP_STATUS_FSFREQ_ABORTNOTNEEDED; break; case FSF_PORT_BOXED: - zfcp_erp_port_boxed(unit->port, 47, req); + zfcp_erp_port_boxed(unit->port, "fsafch3", req); req->status |= ZFCP_STATUS_FSFREQ_ERROR | ZFCP_STATUS_FSFREQ_RETRY; break; case FSF_LUN_BOXED: - zfcp_erp_unit_boxed(unit, 48, req); + zfcp_erp_unit_boxed(unit, "fsafch4", req); req->status |= ZFCP_STATUS_FSFREQ_ERROR | ZFCP_STATUS_FSFREQ_RETRY; break; @@ -982,7 +985,7 @@ static void zfcp_fsf_send_ct_handler(struct zfcp_fsf_req *req) ZFCP_STATUS_FSFREQ_RETRY; break; case FSF_PORT_HANDLE_NOT_VALID: - zfcp_erp_adapter_reopen(adapter, 0, 106, req); + zfcp_erp_adapter_reopen(adapter, 0, "fsscth1", req); case FSF_GENERIC_COMMAND_REJECTED: case FSF_PAYLOAD_SIZE_MISMATCH: case FSF_REQUEST_SIZE_TOO_LARGE: @@ -1400,7 +1403,7 @@ static void zfcp_fsf_open_port_handler(struct zfcp_fsf_req *req) "Not enough FCP adapter resources to open " "remote port 0x%016Lx\n", (unsigned long long)port->wwpn); - zfcp_erp_port_failed(port, 31, req); + zfcp_erp_port_failed(port, "fsoph_1", req); req->status |= ZFCP_STATUS_FSFREQ_ERROR; break; case FSF_ADAPTER_STATUS_AVAILABLE: @@ -1506,13 +1509,13 @@ static void zfcp_fsf_close_port_handler(struct zfcp_fsf_req *req) switch (req->qtcb->header.fsf_status) { case FSF_PORT_HANDLE_NOT_VALID: - zfcp_erp_adapter_reopen(port->adapter, 0, 107, req); + zfcp_erp_adapter_reopen(port->adapter, 0, "fscph_1", req); req->status |= ZFCP_STATUS_FSFREQ_ERROR; break; case FSF_ADAPTER_STATUS_AVAILABLE: break; case FSF_GOOD: - zfcp_erp_modify_port_status(port, 33, req, + zfcp_erp_modify_port_status(port, "fscph_2", req, ZFCP_STATUS_COMMON_OPEN, ZFCP_CLEAR); break; @@ -1641,7 +1644,7 @@ static void zfcp_fsf_close_wka_port_handler(struct zfcp_fsf_req *req) if (req->qtcb->header.fsf_status == FSF_PORT_HANDLE_NOT_VALID) { req->status |= ZFCP_STATUS_FSFREQ_ERROR; - zfcp_erp_adapter_reopen(wka_port->adapter, 0, 84, req); + zfcp_erp_adapter_reopen(wka_port->adapter, 0, "fscwph1", req); } wka_port->status = ZFCP_WKA_PORT_OFFLINE; @@ -1700,14 +1703,14 @@ static void zfcp_fsf_close_physical_port_handler(struct zfcp_fsf_req *req) switch (header->fsf_status) { case FSF_PORT_HANDLE_NOT_VALID: - zfcp_erp_adapter_reopen(port->adapter, 0, 108, req); + zfcp_erp_adapter_reopen(port->adapter, 0, "fscpph1", req); req->status |= ZFCP_STATUS_FSFREQ_ERROR; break; case FSF_ACCESS_DENIED: zfcp_fsf_access_denied_port(req, port); break; case FSF_PORT_BOXED: - zfcp_erp_port_boxed(port, 50, req); + zfcp_erp_port_boxed(port, "fscpph2", req); req->status |= ZFCP_STATUS_FSFREQ_ERROR | ZFCP_STATUS_FSFREQ_RETRY; /* can't use generic zfcp_erp_modify_port_status because @@ -1805,7 +1808,7 @@ static void zfcp_fsf_open_unit_handler(struct zfcp_fsf_req *req) switch (header->fsf_status) { case FSF_PORT_HANDLE_NOT_VALID: - zfcp_erp_adapter_reopen(unit->port->adapter, 0, 109, req); + zfcp_erp_adapter_reopen(unit->port->adapter, 0, "fsouh_1", req); /* fall through */ case FSF_LUN_ALREADY_OPEN: break; @@ -1815,7 +1818,7 @@ static void zfcp_fsf_open_unit_handler(struct zfcp_fsf_req *req) atomic_clear_mask(ZFCP_STATUS_UNIT_READONLY, &unit->status); break; case FSF_PORT_BOXED: - zfcp_erp_port_boxed(unit->port, 51, req); + zfcp_erp_port_boxed(unit->port, "fsouh_2", req); req->status |= ZFCP_STATUS_FSFREQ_ERROR | ZFCP_STATUS_FSFREQ_RETRY; break; @@ -1831,7 +1834,7 @@ static void zfcp_fsf_open_unit_handler(struct zfcp_fsf_req *req) else zfcp_act_eval_err(adapter, header->fsf_status_qual.word[2]); - zfcp_erp_unit_access_denied(unit, 60, req); + zfcp_erp_unit_access_denied(unit, "fsouh_3", req); atomic_clear_mask(ZFCP_STATUS_UNIT_SHARED, &unit->status); atomic_clear_mask(ZFCP_STATUS_UNIT_READONLY, &unit->status); req->status |= ZFCP_STATUS_FSFREQ_ERROR; @@ -1842,7 +1845,7 @@ static void zfcp_fsf_open_unit_handler(struct zfcp_fsf_req *req) "0x%016Lx on port 0x%016Lx\n", (unsigned long long)unit->fcp_lun, (unsigned long long)unit->port->wwpn); - zfcp_erp_unit_failed(unit, 34, req); + zfcp_erp_unit_failed(unit, "fsouh_4", req); /* fall through */ case FSF_INVALID_COMMAND_OPTION: req->status |= ZFCP_STATUS_FSFREQ_ERROR; @@ -1891,9 +1894,9 @@ static void zfcp_fsf_open_unit_handler(struct zfcp_fsf_req *req) "port 0x%016Lx)\n", (unsigned long long)unit->fcp_lun, (unsigned long long)unit->port->wwpn); - zfcp_erp_unit_failed(unit, 35, req); + zfcp_erp_unit_failed(unit, "fsouh_5", req); req->status |= ZFCP_STATUS_FSFREQ_ERROR; - zfcp_erp_unit_shutdown(unit, 0, 80, req); + zfcp_erp_unit_shutdown(unit, 0, "fsouh_6", req); } else if (!exclusive && readwrite) { dev_err(&adapter->ccw_device->dev, "Shared read-write access not " @@ -1901,9 +1904,9 @@ static void zfcp_fsf_open_unit_handler(struct zfcp_fsf_req *req) "0x%016Lx)\n", (unsigned long long)unit->fcp_lun, (unsigned long long)unit->port->wwpn); - zfcp_erp_unit_failed(unit, 36, req); + zfcp_erp_unit_failed(unit, "fsouh_7", req); req->status |= ZFCP_STATUS_FSFREQ_ERROR; - zfcp_erp_unit_shutdown(unit, 0, 81, req); + zfcp_erp_unit_shutdown(unit, 0, "fsouh_8", req); } } break; @@ -1968,15 +1971,15 @@ static void zfcp_fsf_close_unit_handler(struct zfcp_fsf_req *req) switch (req->qtcb->header.fsf_status) { case FSF_PORT_HANDLE_NOT_VALID: - zfcp_erp_adapter_reopen(unit->port->adapter, 0, 110, req); + zfcp_erp_adapter_reopen(unit->port->adapter, 0, "fscuh_1", req); req->status |= ZFCP_STATUS_FSFREQ_ERROR; break; case FSF_LUN_HANDLE_NOT_VALID: - zfcp_erp_port_reopen(unit->port, 0, 111, req); + zfcp_erp_port_reopen(unit->port, 0, "fscuh_2", req); req->status |= ZFCP_STATUS_FSFREQ_ERROR; break; case FSF_PORT_BOXED: - zfcp_erp_port_boxed(unit->port, 52, req); + zfcp_erp_port_boxed(unit->port, "fscuh_3", req); req->status |= ZFCP_STATUS_FSFREQ_ERROR | ZFCP_STATUS_FSFREQ_RETRY; break; @@ -2215,12 +2218,12 @@ static void zfcp_fsf_send_fcp_command_handler(struct zfcp_fsf_req *req) switch (header->fsf_status) { case FSF_HANDLE_MISMATCH: case FSF_PORT_HANDLE_NOT_VALID: - zfcp_erp_adapter_reopen(unit->port->adapter, 0, 112, req); + zfcp_erp_adapter_reopen(unit->port->adapter, 0, "fssfch1", req); req->status |= ZFCP_STATUS_FSFREQ_ERROR; break; case FSF_FCPLUN_NOT_VALID: case FSF_LUN_HANDLE_NOT_VALID: - zfcp_erp_port_reopen(unit->port, 0, 113, req); + zfcp_erp_port_reopen(unit->port, 0, "fssfch2", req); req->status |= ZFCP_STATUS_FSFREQ_ERROR; break; case FSF_SERVICE_CLASS_NOT_SUPPORTED: @@ -2236,7 +2239,8 @@ static void zfcp_fsf_send_fcp_command_handler(struct zfcp_fsf_req *req) req->qtcb->bottom.io.data_direction, (unsigned long long)unit->fcp_lun, (unsigned long long)unit->port->wwpn); - zfcp_erp_adapter_shutdown(unit->port->adapter, 0, 133, req); + zfcp_erp_adapter_shutdown(unit->port->adapter, 0, "fssfch3", + req); req->status |= ZFCP_STATUS_FSFREQ_ERROR; break; case FSF_CMND_LENGTH_NOT_VALID: @@ -2246,16 +2250,17 @@ static void zfcp_fsf_send_fcp_command_handler(struct zfcp_fsf_req *req) req->qtcb->bottom.io.fcp_cmnd_length, (unsigned long long)unit->fcp_lun, (unsigned long long)unit->port->wwpn); - zfcp_erp_adapter_shutdown(unit->port->adapter, 0, 134, req); + zfcp_erp_adapter_shutdown(unit->port->adapter, 0, "fssfch4", + req); req->status |= ZFCP_STATUS_FSFREQ_ERROR; break; case FSF_PORT_BOXED: - zfcp_erp_port_boxed(unit->port, 53, req); + zfcp_erp_port_boxed(unit->port, "fssfch5", req); req->status |= ZFCP_STATUS_FSFREQ_ERROR | ZFCP_STATUS_FSFREQ_RETRY; break; case FSF_LUN_BOXED: - zfcp_erp_unit_boxed(unit, 54, req); + zfcp_erp_unit_boxed(unit, "fssfch6", req); req->status |= ZFCP_STATUS_FSFREQ_ERROR | ZFCP_STATUS_FSFREQ_RETRY; break; @@ -2388,7 +2393,7 @@ int zfcp_fsf_send_fcp_command_task(struct zfcp_unit *unit, "on port 0x%016Lx closed\n", (unsigned long long)unit->fcp_lun, (unsigned long long)unit->port->wwpn); - zfcp_erp_unit_shutdown(unit, 0, 131, req); + zfcp_erp_unit_shutdown(unit, 0, "fssfct1", req); retval = -EINVAL; } goto failed_scsi_cmnd; diff --git a/drivers/s390/scsi/zfcp_qdio.c b/drivers/s390/scsi/zfcp_qdio.c index 3d06870..c2eb94f 100644 --- a/drivers/s390/scsi/zfcp_qdio.c +++ b/drivers/s390/scsi/zfcp_qdio.c @@ -58,7 +58,7 @@ void zfcp_qdio_free(struct zfcp_adapter *adapter) } } -static void zfcp_qdio_handler_error(struct zfcp_adapter *adapter, u8 id) +static void zfcp_qdio_handler_error(struct zfcp_adapter *adapter, char *id) { dev_warn(&adapter->ccw_device->dev, "A QDIO problem occurred\n"); @@ -103,7 +103,7 @@ static void zfcp_qdio_int_req(struct ccw_device *cdev, unsigned int qdio_err, if (unlikely(qdio_err)) { zfcp_hba_dbf_event_qdio(adapter, qdio_err, first, count); - zfcp_qdio_handler_error(adapter, 140); + zfcp_qdio_handler_error(adapter, "qdireq1"); return; } @@ -172,7 +172,7 @@ static void zfcp_qdio_int_resp(struct ccw_device *cdev, unsigned int qdio_err, if (unlikely(qdio_err)) { zfcp_hba_dbf_event_qdio(adapter, qdio_err, first, count); - zfcp_qdio_handler_error(adapter, 147); + zfcp_qdio_handler_error(adapter, "qdires1"); return; } diff --git a/drivers/s390/scsi/zfcp_scsi.c b/drivers/s390/scsi/zfcp_scsi.c index c17505f..2af8cfb 100644 --- a/drivers/s390/scsi/zfcp_scsi.c +++ b/drivers/s390/scsi/zfcp_scsi.c @@ -28,7 +28,7 @@ static void zfcp_scsi_slave_destroy(struct scsi_device *sdpnt) { struct zfcp_unit *unit = (struct zfcp_unit *) sdpnt->hostdata; unit->device = NULL; - zfcp_erp_unit_failed(unit, 12, NULL); + zfcp_erp_unit_failed(unit, "scslvd1", NULL); zfcp_unit_put(unit); } @@ -257,7 +257,7 @@ static int zfcp_scsi_eh_host_reset_handler(struct scsi_cmnd *scpnt) struct zfcp_unit *unit = scpnt->device->hostdata; struct zfcp_adapter *adapter = unit->port->adapter; - zfcp_erp_adapter_reopen(adapter, 0, 141, scpnt); + zfcp_erp_adapter_reopen(adapter, 0, "schrh_1", scpnt); zfcp_erp_wait(adapter); return SUCCESS; diff --git a/drivers/s390/scsi/zfcp_sysfs.c b/drivers/s390/scsi/zfcp_sysfs.c index 14e38c2..9a3b8e2 100644 --- a/drivers/s390/scsi/zfcp_sysfs.c +++ b/drivers/s390/scsi/zfcp_sysfs.c @@ -112,9 +112,9 @@ static ZFCP_DEV_ATTR(_feat, failed, S_IWUSR | S_IRUGO, \ zfcp_sysfs_##_feat##_failed_show, \ zfcp_sysfs_##_feat##_failed_store); -ZFCP_SYSFS_FAILED(zfcp_adapter, adapter, adapter, 44, 93); -ZFCP_SYSFS_FAILED(zfcp_port, port, port->adapter, 45, 96); -ZFCP_SYSFS_FAILED(zfcp_unit, unit, unit->port->adapter, 46, 97); +ZFCP_SYSFS_FAILED(zfcp_adapter, adapter, adapter, "syafai1", "syafai2"); +ZFCP_SYSFS_FAILED(zfcp_port, port, port->adapter, "sypfai1", "sypfai2"); +ZFCP_SYSFS_FAILED(zfcp_unit, unit, unit->port->adapter, "syufai1", "syufai2"); static ssize_t zfcp_sysfs_port_rescan_store(struct device *dev, struct device_attribute *attr, @@ -168,7 +168,7 @@ static ssize_t zfcp_sysfs_port_remove_store(struct device *dev, goto out; } - zfcp_erp_port_shutdown(port, 0, 92, NULL); + zfcp_erp_port_shutdown(port, 0, "syprs_1", NULL); zfcp_erp_wait(adapter); zfcp_port_put(port); zfcp_port_dequeue(port); @@ -222,7 +222,7 @@ static ssize_t zfcp_sysfs_unit_add_store(struct device *dev, retval = 0; - zfcp_erp_unit_reopen(unit, 0, 94, NULL); + zfcp_erp_unit_reopen(unit, 0, "syuas_1", NULL); zfcp_erp_wait(unit->port->adapter); zfcp_unit_put(unit); out: @@ -268,7 +268,7 @@ static ssize_t zfcp_sysfs_unit_remove_store(struct device *dev, goto out; } - zfcp_erp_unit_shutdown(unit, 0, 95, NULL); + zfcp_erp_unit_shutdown(unit, 0, "syurs_1", NULL); zfcp_erp_wait(unit->port->adapter); zfcp_unit_put(unit); zfcp_unit_dequeue(unit); -- cgit v0.10.2 From 21ddaa53f92dba820a3778978e617f20ecb6ab6f Mon Sep 17 00:00:00 2001 From: Christof Schmitt Date: Mon, 2 Mar 2009 13:09:05 +0100 Subject: [SCSI] zfcp: Remove PCI flag The usage of the PCI flag to trigger interrupts is optional. Even without setting the flag, qdio still receives interrupts to continue working on the queue. Remove the PCI flag from zfcp, it is not necessary. Acked-by: Swen Schillig Signed-off-by: Christof Schmitt Signed-off-by: James Bottomley diff --git a/drivers/s390/scsi/zfcp_def.h b/drivers/s390/scsi/zfcp_def.h index 8412bb9..22e418d 100644 --- a/drivers/s390/scsi/zfcp_def.h +++ b/drivers/s390/scsi/zfcp_def.h @@ -443,8 +443,6 @@ struct zfcp_adapter { spinlock_t req_list_lock; /* request list lock */ struct zfcp_qdio_queue req_q; /* request queue */ spinlock_t req_q_lock; /* for operations on queue */ - int req_q_pci_batch; /* SBALs since PCI indication - was last set */ ktime_t req_q_time; /* time of last fill level change */ u64 req_q_util; /* for accounting */ spinlock_t qdio_stat_lock; diff --git a/drivers/s390/scsi/zfcp_qdio.c b/drivers/s390/scsi/zfcp_qdio.c index c2eb94f..e0a2153 100644 --- a/drivers/s390/scsi/zfcp_qdio.c +++ b/drivers/s390/scsi/zfcp_qdio.c @@ -11,9 +11,6 @@ #include "zfcp_ext.h" -/* FIXME(tune): free space should be one max. SBAL chain plus what? */ -#define ZFCP_QDIO_PCI_INTERVAL (QDIO_MAX_BUFFERS_PER_Q \ - - (FSF_MAX_SBALS_PER_REQ + 4)) #define QBUFF_PER_PAGE (PAGE_SIZE / sizeof(struct qdio_buffer)) static int zfcp_qdio_buffers_enqueue(struct qdio_buffer **sbal) @@ -364,23 +361,12 @@ int zfcp_qdio_send(struct zfcp_fsf_req *fsf_req) struct zfcp_qdio_queue *req_q = &adapter->req_q; int first = fsf_req->sbal_first; int count = fsf_req->sbal_number; - int retval, pci, pci_batch; - struct qdio_buffer_element *sbale; - - /* acknowledgements for transferred buffers */ - pci_batch = adapter->req_q_pci_batch + count; - if (unlikely(pci_batch >= ZFCP_QDIO_PCI_INTERVAL)) { - pci_batch %= ZFCP_QDIO_PCI_INTERVAL; - pci = first + count - (pci_batch + 1); - pci %= QDIO_MAX_BUFFERS_PER_Q; - sbale = zfcp_qdio_sbale(req_q, pci, 0); - sbale->flags |= SBAL_FLAGS0_PCI; - } + int retval; + unsigned int qdio_flags = QDIO_FLAG_SYNC_OUTPUT; zfcp_qdio_account(adapter); - retval = do_QDIO(adapter->ccw_device, QDIO_FLAG_SYNC_OUTPUT, 0, first, - count); + retval = do_QDIO(adapter->ccw_device, qdio_flags, 0, first, count); if (unlikely(retval)) { zfcp_qdio_zero_sbals(req_q->sbal, first, count); return retval; @@ -390,7 +376,6 @@ int zfcp_qdio_send(struct zfcp_fsf_req *fsf_req) atomic_sub(count, &req_q->count); req_q->first += count; req_q->first %= QDIO_MAX_BUFFERS_PER_Q; - adapter->req_q_pci_batch = pci_batch; return 0; } @@ -461,7 +446,6 @@ void zfcp_qdio_close(struct zfcp_adapter *adapter) } req_q->first = 0; atomic_set(&req_q->count, 0); - adapter->req_q_pci_batch = 0; adapter->resp_q.first = 0; atomic_set(&adapter->resp_q.count, 0); } @@ -499,7 +483,6 @@ int zfcp_qdio_open(struct zfcp_adapter *adapter) /* set index of first avalable SBALS / number of available SBALS */ adapter->req_q.first = 0; atomic_set(&adapter->req_q.count, QDIO_MAX_BUFFERS_PER_Q); - adapter->req_q_pci_batch = 0; return 0; -- cgit v0.10.2 From 24095490681d130979c18685dc0b5a308057e225 Mon Sep 17 00:00:00 2001 From: Swen Schillig Date: Mon, 2 Mar 2009 13:09:07 +0100 Subject: [SCSI] zfcp: incorrect reaction on incoming RSCN After an error condition resolved a remote storage port was never re-opened. The incoming RSCN was not processed accordingly due to a misinterpreted status flag / return value combination. Signed-off-by: Swen Schillig Signed-off-by: Christof Schmitt Signed-off-by: James Bottomley diff --git a/drivers/s390/scsi/zfcp_fc.c b/drivers/s390/scsi/zfcp_fc.c index ec700b3..49a7a90 100644 --- a/drivers/s390/scsi/zfcp_fc.c +++ b/drivers/s390/scsi/zfcp_fc.c @@ -145,16 +145,10 @@ static void _zfcp_fc_incoming_rscn(struct zfcp_fsf_req *fsf_req, u32 range, struct zfcp_port *port; read_lock_irqsave(&zfcp_data.config_lock, flags); - list_for_each_entry(port, &fsf_req->adapter->port_list_head, list) { - if (!(atomic_read(&port->status) & ZFCP_STATUS_PORT_PHYS_OPEN)) - /* Try to connect to unused ports anyway. */ - zfcp_erp_port_reopen(port, - ZFCP_STATUS_COMMON_ERP_FAILED, - "fcirsc1", fsf_req); - else if ((port->d_id & range) == (elem->nport_did & range)) - /* Check connection status for connected ports */ + list_for_each_entry(port, &fsf_req->adapter->port_list_head, list) + if ((port->d_id & range) == (elem->nport_did & range)) zfcp_test_link(port); - } + read_unlock_irqrestore(&zfcp_data.config_lock, flags); } @@ -381,8 +375,10 @@ static void zfcp_fc_adisc_handler(unsigned long data) if (!port->wwnn) port->wwnn = ls_adisc->wwnn; - if (port->wwpn != ls_adisc->wwpn) - zfcp_erp_port_reopen(port, 0, "fcadh_2", NULL); + if ((port->wwpn != ls_adisc->wwpn) || + !(atomic_read(&port->status) & ZFCP_STATUS_COMMON_OPEN)) + zfcp_erp_port_reopen(port, ZFCP_STATUS_COMMON_ERP_FAILED, + "fcadh_2", NULL); out: zfcp_port_put(port); diff --git a/drivers/s390/scsi/zfcp_fsf.c b/drivers/s390/scsi/zfcp_fsf.c index b4c9ba0..71c32f3 100644 --- a/drivers/s390/scsi/zfcp_fsf.c +++ b/drivers/s390/scsi/zfcp_fsf.c @@ -1161,10 +1161,6 @@ int zfcp_fsf_send_els(struct zfcp_send_els *els) struct fsf_qtcb_bottom_support *bottom; int ret = -EIO; - if (unlikely(!(atomic_read(&els->port->status) & - ZFCP_STATUS_COMMON_UNBLOCKED))) - return -EBUSY; - spin_lock_bh(&adapter->req_q_lock); if (zfcp_fsf_req_sbal_get(adapter)) goto out; -- cgit v0.10.2 From a2fa0aede07c9488239dcac1eae58233181c355a Mon Sep 17 00:00:00 2001 From: Christof Schmitt Date: Mon, 2 Mar 2009 13:09:08 +0100 Subject: [SCSI] zfcp: Block FC transport rports early on errors Use the I/O blocking mechanism in the FC transport class to allow faster failovers for multipathing: - Call fc_remote_port_delete early to set the rport to BLOCKED. - Check the rport status in queuecommand with fc_remote_portchkready to no longer accept new I/O for this port and fail the I/O with the appropriate scsi_cmnd result. - Implement the terminate_rport_io handler to abort all pending I/O requests - Return SCSI commands with DID_TRANSPORT_DISRUPTED while erp is running. - When updating the remote port status, check for late changes and update the remote ports status accordingly. Acked-by: Swen Schillig Signed-off-by: Christof Schmitt Signed-off-by: James Bottomley diff --git a/drivers/s390/scsi/zfcp_aux.c b/drivers/s390/scsi/zfcp_aux.c index 69a3118..b2be659 100644 --- a/drivers/s390/scsi/zfcp_aux.c +++ b/drivers/s390/scsi/zfcp_aux.c @@ -3,7 +3,7 @@ * * Module interface and handling of zfcp data structures. * - * Copyright IBM Corporation 2002, 2008 + * Copyright IBM Corporation 2002, 2009 */ /* @@ -606,10 +606,12 @@ struct zfcp_port *zfcp_port_enqueue(struct zfcp_adapter *adapter, u64 wwpn, INIT_LIST_HEAD(&port->unit_list_head); INIT_WORK(&port->gid_pn_work, zfcp_erp_port_strategy_open_lookup); INIT_WORK(&port->test_link_work, zfcp_fc_link_test_work); + INIT_WORK(&port->rport_work, zfcp_scsi_rport_work); port->adapter = adapter; port->d_id = d_id; port->wwpn = wwpn; + port->rport_task = RPORT_NONE; /* mark port unusable as long as sysfs registration is not complete */ atomic_set_mask(status | ZFCP_STATUS_COMMON_REMOVE, &port->status); diff --git a/drivers/s390/scsi/zfcp_def.h b/drivers/s390/scsi/zfcp_def.h index 22e418d..a031863 100644 --- a/drivers/s390/scsi/zfcp_def.h +++ b/drivers/s390/scsi/zfcp_def.h @@ -3,7 +3,7 @@ * * Global definitions for the zfcp device driver. * - * Copyright IBM Corporation 2002, 2008 + * Copyright IBM Corporation 2002, 2009 */ #ifndef ZFCP_DEF_H @@ -512,6 +512,8 @@ struct zfcp_port { u32 supported_classes; struct work_struct gid_pn_work; struct work_struct test_link_work; + struct work_struct rport_work; + enum { RPORT_NONE, RPORT_ADD, RPORT_DEL } rport_task; }; struct zfcp_unit { diff --git a/drivers/s390/scsi/zfcp_erp.c b/drivers/s390/scsi/zfcp_erp.c index 65addf6..dee1cc3 100644 --- a/drivers/s390/scsi/zfcp_erp.c +++ b/drivers/s390/scsi/zfcp_erp.c @@ -3,7 +3,7 @@ * * Error Recovery Procedures (ERP). * - * Copyright IBM Corporation 2002, 2008 + * Copyright IBM Corporation 2002, 2009 */ #define KMSG_COMPONENT "zfcp" @@ -240,6 +240,7 @@ static int _zfcp_erp_adapter_reopen(struct zfcp_adapter *adapter, int clear_mask, char *id, void *ref) { zfcp_erp_adapter_block(adapter, clear_mask); + zfcp_scsi_schedule_rports_block(adapter); /* ensure propagation of failed status to new devices */ if (atomic_read(&adapter->status) & ZFCP_STATUS_COMMON_ERP_FAILED) { @@ -322,6 +323,7 @@ static void _zfcp_erp_port_forced_reopen(struct zfcp_port *port, int clear, char *id, void *ref) { zfcp_erp_port_block(port, clear); + zfcp_scsi_schedule_rport_block(port); if (atomic_read(&port->status) & ZFCP_STATUS_COMMON_ERP_FAILED) return; @@ -353,6 +355,7 @@ static int _zfcp_erp_port_reopen(struct zfcp_port *port, int clear, char *id, void *ref) { zfcp_erp_port_block(port, clear); + zfcp_scsi_schedule_rport_block(port); if (atomic_read(&port->status) & ZFCP_STATUS_COMMON_ERP_FAILED) { /* ensure propagation of failed status to new devices */ @@ -1211,37 +1214,6 @@ static void zfcp_erp_schedule_work(struct zfcp_unit *unit) queue_work(zfcp_data.work_queue, &p->work); } -static void zfcp_erp_rport_register(struct zfcp_port *port) -{ - struct fc_rport_identifiers ids; - ids.node_name = port->wwnn; - ids.port_name = port->wwpn; - ids.port_id = port->d_id; - ids.roles = FC_RPORT_ROLE_FCP_TARGET; - port->rport = fc_remote_port_add(port->adapter->scsi_host, 0, &ids); - if (!port->rport) { - dev_err(&port->adapter->ccw_device->dev, - "Registering port 0x%016Lx failed\n", - (unsigned long long)port->wwpn); - return; - } - - scsi_target_unblock(&port->rport->dev); - port->rport->maxframe_size = port->maxframe_size; - port->rport->supported_classes = port->supported_classes; -} - -static void zfcp_erp_rports_del(struct zfcp_adapter *adapter) -{ - struct zfcp_port *port; - list_for_each_entry(port, &adapter->port_list_head, list) { - if (!port->rport) - continue; - fc_remote_port_delete(port->rport); - port->rport = NULL; - } -} - static void zfcp_erp_action_cleanup(struct zfcp_erp_action *act, int result) { struct zfcp_adapter *adapter = act->adapter; @@ -1250,8 +1222,8 @@ static void zfcp_erp_action_cleanup(struct zfcp_erp_action *act, int result) switch (act->action) { case ZFCP_ERP_ACTION_REOPEN_UNIT: - if ((result == ZFCP_ERP_SUCCEEDED) && - !unit->device && port->rport) { + flush_work(&port->rport_work); + if ((result == ZFCP_ERP_SUCCEEDED) && !unit->device) { if (!(atomic_read(&unit->status) & ZFCP_STATUS_UNIT_SCSI_WORK_PENDING)) zfcp_erp_schedule_work(unit); @@ -1261,23 +1233,17 @@ static void zfcp_erp_action_cleanup(struct zfcp_erp_action *act, int result) case ZFCP_ERP_ACTION_REOPEN_PORT_FORCED: case ZFCP_ERP_ACTION_REOPEN_PORT: - if ((result == ZFCP_ERP_SUCCEEDED) && !port->rport) - zfcp_erp_rport_register(port); - if ((result != ZFCP_ERP_SUCCEEDED) && port->rport) { - fc_remote_port_delete(port->rport); - port->rport = NULL; - } + if (result == ZFCP_ERP_SUCCEEDED) + zfcp_scsi_schedule_rport_register(port); zfcp_port_put(port); break; case ZFCP_ERP_ACTION_REOPEN_ADAPTER: - if (result != ZFCP_ERP_SUCCEEDED) { - unregister_service_level(&adapter->service_level); - zfcp_erp_rports_del(adapter); - } else { + if (result == ZFCP_ERP_SUCCEEDED) { register_service_level(&adapter->service_level); schedule_work(&adapter->scan_work); - } + } else + unregister_service_level(&adapter->service_level); zfcp_adapter_put(adapter); break; } diff --git a/drivers/s390/scsi/zfcp_ext.h b/drivers/s390/scsi/zfcp_ext.h index 569d243..f6399ca 100644 --- a/drivers/s390/scsi/zfcp_ext.h +++ b/drivers/s390/scsi/zfcp_ext.h @@ -3,7 +3,7 @@ * * External function declarations. * - * Copyright IBM Corporation 2002, 2008 + * Copyright IBM Corporation 2002, 2009 */ #ifndef ZFCP_EXT_H @@ -154,6 +154,10 @@ extern int zfcp_adapter_scsi_register(struct zfcp_adapter *); extern void zfcp_adapter_scsi_unregister(struct zfcp_adapter *); extern char *zfcp_get_fcp_sns_info_ptr(struct fcp_rsp_iu *); extern struct fc_function_template zfcp_transport_functions; +extern void zfcp_scsi_rport_work(struct work_struct *); +extern void zfcp_scsi_schedule_rport_register(struct zfcp_port *); +extern void zfcp_scsi_schedule_rport_block(struct zfcp_port *); +extern void zfcp_scsi_schedule_rports_block(struct zfcp_adapter *); /* zfcp_sysfs.c */ extern struct attribute_group zfcp_sysfs_unit_attrs; diff --git a/drivers/s390/scsi/zfcp_fc.c b/drivers/s390/scsi/zfcp_fc.c index 49a7a90..c22c478 100644 --- a/drivers/s390/scsi/zfcp_fc.c +++ b/drivers/s390/scsi/zfcp_fc.c @@ -3,7 +3,7 @@ * * Fibre Channel related functions for the zfcp device driver. * - * Copyright IBM Corporation 2008 + * Copyright IBM Corporation 2008, 2009 */ #define KMSG_COMPONENT "zfcp" @@ -376,10 +376,14 @@ static void zfcp_fc_adisc_handler(unsigned long data) port->wwnn = ls_adisc->wwnn; if ((port->wwpn != ls_adisc->wwpn) || - !(atomic_read(&port->status) & ZFCP_STATUS_COMMON_OPEN)) + !(atomic_read(&port->status) & ZFCP_STATUS_COMMON_OPEN)) { zfcp_erp_port_reopen(port, ZFCP_STATUS_COMMON_ERP_FAILED, "fcadh_2", NULL); + goto out; + } + /* port is good, unblock rport without going through erp */ + zfcp_scsi_schedule_rport_register(port); out: zfcp_port_put(port); kfree(adisc); @@ -423,14 +427,23 @@ void zfcp_fc_link_test_work(struct work_struct *work) container_of(work, struct zfcp_port, test_link_work); int retval; + if (!(atomic_read(&port->status) & ZFCP_STATUS_COMMON_UNBLOCKED)) { + zfcp_port_put(port); + return; /* port erp is running and will update rport status */ + } + + zfcp_port_get(port); + port->rport_task = RPORT_DEL; + zfcp_scsi_rport_work(&port->rport_work); + retval = zfcp_fc_adisc(port); if (retval == 0) return; /* send of ADISC was not possible */ + zfcp_erp_port_forced_reopen(port, 0, "fcltwk1", NULL); + zfcp_port_put(port); - if (retval != -EBUSY) - zfcp_erp_port_forced_reopen(port, 0, "fcltwk1", NULL); } /** diff --git a/drivers/s390/scsi/zfcp_fsf.c b/drivers/s390/scsi/zfcp_fsf.c index 71c32f3..9fa8c89 100644 --- a/drivers/s390/scsi/zfcp_fsf.c +++ b/drivers/s390/scsi/zfcp_fsf.c @@ -3,7 +3,7 @@ * * Implementation of FSF commands. * - * Copyright IBM Corporation 2002, 2008 + * Copyright IBM Corporation 2002, 2009 */ #define KMSG_COMPONENT "zfcp" @@ -177,6 +177,7 @@ static void zfcp_fsf_link_down_info_eval(struct zfcp_fsf_req *req, char *id, return; atomic_set_mask(ZFCP_STATUS_ADAPTER_LINK_UNPLUGGED, &adapter->status); + zfcp_scsi_schedule_rports_block(adapter); if (!link_down) goto out; diff --git a/drivers/s390/scsi/zfcp_scsi.c b/drivers/s390/scsi/zfcp_scsi.c index 2af8cfb..7141f9a 100644 --- a/drivers/s390/scsi/zfcp_scsi.c +++ b/drivers/s390/scsi/zfcp_scsi.c @@ -3,7 +3,7 @@ * * Interface to Linux SCSI midlayer. * - * Copyright IBM Corporation 2002, 2008 + * Copyright IBM Corporation 2002, 2009 */ #define KMSG_COMPONENT "zfcp" @@ -57,8 +57,8 @@ static int zfcp_scsi_queuecommand(struct scsi_cmnd *scpnt, { struct zfcp_unit *unit; struct zfcp_adapter *adapter; - int status; - int ret; + int status, scsi_result, ret; + struct fc_rport *rport = starget_to_rport(scsi_target(scpnt->device)); /* reset the status for this request */ scpnt->result = 0; @@ -80,6 +80,14 @@ static int zfcp_scsi_queuecommand(struct scsi_cmnd *scpnt, return 0; } + scsi_result = fc_remote_port_chkready(rport); + if (unlikely(scsi_result)) { + scpnt->result = scsi_result; + zfcp_scsi_dbf_event_result("fail", 4, adapter, scpnt, NULL); + scpnt->scsi_done(scpnt); + return 0; + } + status = atomic_read(&unit->status); if (unlikely((status & ZFCP_STATUS_COMMON_ERP_FAILED) || !(status & ZFCP_STATUS_COMMON_RUNNING))) { @@ -473,6 +481,109 @@ static void zfcp_set_rport_dev_loss_tmo(struct fc_rport *rport, u32 timeout) rport->dev_loss_tmo = timeout; } +/** + * zfcp_scsi_dev_loss_tmo_callbk - Free any reference to rport + * @rport: The rport that is about to be deleted. + */ +static void zfcp_scsi_dev_loss_tmo_callbk(struct fc_rport *rport) +{ + struct zfcp_port *port = rport->dd_data; + + write_lock_irq(&zfcp_data.config_lock); + port->rport = NULL; + write_unlock_irq(&zfcp_data.config_lock); +} + +/** + * zfcp_scsi_terminate_rport_io - Terminate all I/O on a rport + * @rport: The FC rport where to teminate I/O + * + * Abort all pending SCSI commands for a port by closing the + * port. Using a reopen for avoids a conflict with a shutdown + * overwriting a reopen. + */ +static void zfcp_scsi_terminate_rport_io(struct fc_rport *rport) +{ + struct zfcp_port *port = rport->dd_data; + + zfcp_erp_port_reopen(port, 0, "sctrpi1", NULL); +} + +static void zfcp_scsi_rport_register(struct zfcp_port *port) +{ + struct fc_rport_identifiers ids; + struct fc_rport *rport; + + ids.node_name = port->wwnn; + ids.port_name = port->wwpn; + ids.port_id = port->d_id; + ids.roles = FC_RPORT_ROLE_FCP_TARGET; + + rport = fc_remote_port_add(port->adapter->scsi_host, 0, &ids); + if (!rport) { + dev_err(&port->adapter->ccw_device->dev, + "Registering port 0x%016Lx failed\n", + (unsigned long long)port->wwpn); + return; + } + + rport->dd_data = port; + rport->maxframe_size = port->maxframe_size; + rport->supported_classes = port->supported_classes; + port->rport = rport; +} + +static void zfcp_scsi_rport_block(struct zfcp_port *port) +{ + if (port->rport) + fc_remote_port_delete(port->rport); +} + +void zfcp_scsi_schedule_rport_register(struct zfcp_port *port) +{ + zfcp_port_get(port); + port->rport_task = RPORT_ADD; + + if (!queue_work(zfcp_data.work_queue, &port->rport_work)) + zfcp_port_put(port); +} + +void zfcp_scsi_schedule_rport_block(struct zfcp_port *port) +{ + zfcp_port_get(port); + port->rport_task = RPORT_DEL; + + if (!queue_work(zfcp_data.work_queue, &port->rport_work)) + zfcp_port_put(port); +} + +void zfcp_scsi_schedule_rports_block(struct zfcp_adapter *adapter) +{ + struct zfcp_port *port; + + list_for_each_entry(port, &adapter->port_list_head, list) + zfcp_scsi_schedule_rport_block(port); +} + +void zfcp_scsi_rport_work(struct work_struct *work) +{ + struct zfcp_port *port = container_of(work, struct zfcp_port, + rport_work); + + while (port->rport_task) { + if (port->rport_task == RPORT_ADD) { + port->rport_task = RPORT_NONE; + zfcp_scsi_rport_register(port); + } else { + port->rport_task = RPORT_NONE; + zfcp_scsi_rport_block(port); + } + } + + zfcp_port_put(port); +} + + struct fc_function_template zfcp_transport_functions = { .show_starget_port_id = 1, .show_starget_port_name = 1, @@ -491,6 +602,8 @@ struct fc_function_template zfcp_transport_functions = { .reset_fc_host_stats = zfcp_reset_fc_host_stats, .set_rport_dev_loss_tmo = zfcp_set_rport_dev_loss_tmo, .get_host_port_state = zfcp_get_host_port_state, + .dev_loss_tmo_callbk = zfcp_scsi_dev_loss_tmo_callbk, + .terminate_rport_io = zfcp_scsi_terminate_rport_io, .show_host_port_state = 1, /* no functions registered for following dynamic attributes but directly set by LLDD */ -- cgit v0.10.2 From 2cb5b2ca6dddcdfb0e220f18b4612890a23a1c92 Mon Sep 17 00:00:00 2001 From: Martin Petermann Date: Mon, 2 Mar 2009 13:09:09 +0100 Subject: [SCSI] zfcp: erp failed status bit will not be set It will not be necessary to set the erp failed status bit in case a SCSI device is removed by the SCSI mid layer. In the case a SCSI device is unavailable for a short time (15 to 20 seconds) a FCP unit will not get on-line again. Signed-off-by: Martin Petermann Signed-off-by: Christof Schmitt Signed-off-by: James Bottomley diff --git a/drivers/s390/scsi/zfcp_scsi.c b/drivers/s390/scsi/zfcp_scsi.c index 7141f9a..58201e1 100644 --- a/drivers/s390/scsi/zfcp_scsi.c +++ b/drivers/s390/scsi/zfcp_scsi.c @@ -28,7 +28,6 @@ static void zfcp_scsi_slave_destroy(struct scsi_device *sdpnt) { struct zfcp_unit *unit = (struct zfcp_unit *) sdpnt->hostdata; unit->device = NULL; - zfcp_erp_unit_failed(unit, "scslvd1", NULL); zfcp_unit_put(unit); } -- cgit v0.10.2 From 947a9aca86eb2a921ed7aa92397cf7f38b896f90 Mon Sep 17 00:00:00 2001 From: Swen Schillig Date: Mon, 2 Mar 2009 13:09:10 +0100 Subject: [SCSI] zfcp: fix queue, scheduled work processing. Ensure the refcounting is correct even if we were not able to schedule a work. In addition we have to make sure no scheduled work is pending while we're dequeing the adapter from the systems environment. Signed-off-by: Swen Schillig Signed-off-by: Christof Schmitt Signed-off-by: James Bottomley diff --git a/drivers/s390/scsi/zfcp_aux.c b/drivers/s390/scsi/zfcp_aux.c index b2be659..c4d07be 100644 --- a/drivers/s390/scsi/zfcp_aux.c +++ b/drivers/s390/scsi/zfcp_aux.c @@ -554,6 +554,7 @@ void zfcp_adapter_dequeue(struct zfcp_adapter *adapter) cancel_work_sync(&adapter->scan_work); cancel_work_sync(&adapter->stat_work); + cancel_delayed_work_sync(&adapter->nsp.work); zfcp_adapter_scsi_unregister(adapter); sysfs_remove_group(&adapter->ccw_device->dev.kobj, &zfcp_sysfs_adapter_attrs); diff --git a/drivers/s390/scsi/zfcp_erp.c b/drivers/s390/scsi/zfcp_erp.c index dee1cc3..631bdb1 100644 --- a/drivers/s390/scsi/zfcp_erp.c +++ b/drivers/s390/scsi/zfcp_erp.c @@ -857,7 +857,7 @@ void zfcp_erp_port_strategy_open_lookup(struct work_struct *work) port->erp_action.step = ZFCP_ERP_STEP_NAMESERVER_LOOKUP; if (retval) zfcp_erp_notify(&port->erp_action, ZFCP_ERP_FAILED); - + zfcp_port_put(port); } static int zfcp_erp_port_strategy_open_common(struct zfcp_erp_action *act) @@ -873,7 +873,10 @@ static int zfcp_erp_port_strategy_open_common(struct zfcp_erp_action *act) if (fc_host_port_type(adapter->scsi_host) == FC_PORTTYPE_PTP) return zfcp_erp_open_ptp_port(act); if (!port->d_id) { - queue_work(zfcp_data.work_queue, &port->gid_pn_work); + zfcp_port_get(port); + if (!queue_work(zfcp_data.work_queue, + &port->gid_pn_work)) + zfcp_port_put(port); return ZFCP_ERP_CONTINUES; } case ZFCP_ERP_STEP_NAMESERVER_LOOKUP: @@ -1211,7 +1214,8 @@ static void zfcp_erp_schedule_work(struct zfcp_unit *unit) atomic_set_mask(ZFCP_STATUS_UNIT_SCSI_WORK_PENDING, &unit->status); INIT_WORK(&p->work, zfcp_erp_scsi_scan); p->unit = unit; - queue_work(zfcp_data.work_queue, &p->work); + if (!queue_work(zfcp_data.work_queue, &p->work)) + zfcp_unit_put(unit); } static void zfcp_erp_action_cleanup(struct zfcp_erp_action *act, int result) -- cgit v0.10.2 From 6d1a27f630f1d30bf85c61ec0436c287d0945fcc Mon Sep 17 00:00:00 2001 From: Swen Schillig Date: Mon, 2 Mar 2009 13:09:11 +0100 Subject: [SCSI] zfcp: Ensure all work is cancelled on adapter dequeue A scheduled work might still be pending, running while the adapter is in progress to get dequeued from the system. This can lead to an invalid pointer dereference (Oops). Once the adpater is set online again, ensure the nameserver environment is initialized to the appropriate values again. Signed-off-by: Swen Schillig Signed-off-by: Christof Schmitt Signed-off-by: James Bottomley diff --git a/drivers/s390/scsi/zfcp_aux.c b/drivers/s390/scsi/zfcp_aux.c index c4d07be..616c60f 100644 --- a/drivers/s390/scsi/zfcp_aux.c +++ b/drivers/s390/scsi/zfcp_aux.c @@ -524,7 +524,6 @@ int zfcp_adapter_enqueue(struct ccw_device *ccw_device) goto sysfs_failed; atomic_clear_mask(ZFCP_STATUS_COMMON_REMOVE, &adapter->status); - zfcp_fc_nameserver_init(adapter); if (!zfcp_adapter_scsi_register(adapter)) return 0; diff --git a/drivers/s390/scsi/zfcp_ccw.c b/drivers/s390/scsi/zfcp_ccw.c index 3aeef28..1fe1e2e 100644 --- a/drivers/s390/scsi/zfcp_ccw.c +++ b/drivers/s390/scsi/zfcp_ccw.c @@ -3,7 +3,7 @@ * * Registration and callback for the s390 common I/O layer. * - * Copyright IBM Corporation 2002, 2008 + * Copyright IBM Corporation 2002, 2009 */ #define KMSG_COMPONENT "zfcp" @@ -108,6 +108,7 @@ static int zfcp_ccw_set_online(struct ccw_device *ccw_device) /* initialize request counter */ BUG_ON(!zfcp_reqlist_isempty(adapter)); adapter->req_no = 0; + zfcp_fc_nameserver_init(adapter); zfcp_erp_modify_adapter_status(adapter, "ccsonl1", NULL, ZFCP_STATUS_COMMON_RUNNING, ZFCP_SET); diff --git a/drivers/s390/scsi/zfcp_fc.c b/drivers/s390/scsi/zfcp_fc.c index c22c478..aab8123 100644 --- a/drivers/s390/scsi/zfcp_fc.c +++ b/drivers/s390/scsi/zfcp_fc.c @@ -98,8 +98,12 @@ static void zfcp_wka_port_offline(struct work_struct *work) struct zfcp_wka_port *wka_port = container_of(dw, struct zfcp_wka_port, work); - wait_event(wka_port->completion_wq, - atomic_read(&wka_port->refcount) == 0); + /* Don't wait forvever. If the wka_port is too busy take it offline + through a new call later */ + if (!wait_event_timeout(wka_port->completion_wq, + atomic_read(&wka_port->refcount) == 0, + HZ >> 1)) + return; mutex_lock(&wka_port->mutex); if ((atomic_read(&wka_port->refcount) != 0) || -- cgit v0.10.2 From 0282985da5923fa6365adcc1a1586ae0c13c1617 Mon Sep 17 00:00:00 2001 From: Christof Schmitt Date: Mon, 2 Mar 2009 13:09:06 +0100 Subject: [SCSI] zfcp: Report fc_host_port_type as NPIV Report the fc_host_port_type as FC_PORTTYPE_NPIV when the subchannel is running in NPIV mode. This allows to see the correct type with lsscsi -H -t --list Acked-by: Swen Schillig Signed-off-by: Christof Schmitt Signed-off-by: James Bottomley diff --git a/drivers/s390/scsi/zfcp_fsf.c b/drivers/s390/scsi/zfcp_fsf.c index 9fa8c89..b29f312 100644 --- a/drivers/s390/scsi/zfcp_fsf.c +++ b/drivers/s390/scsi/zfcp_fsf.c @@ -617,9 +617,10 @@ static void zfcp_fsf_exchange_port_evaluate(struct zfcp_fsf_req *req) if (req->data) memcpy(req->data, bottom, sizeof(*bottom)); - if (adapter->connection_features & FSF_FEATURE_NPIV_MODE) + if (adapter->connection_features & FSF_FEATURE_NPIV_MODE) { fc_host_permanent_port_name(shost) = bottom->wwpn; - else + fc_host_port_type(shost) = FC_PORTTYPE_NPIV; + } else fc_host_permanent_port_name(shost) = fc_host_port_name(shost); fc_host_maxframe_size(shost) = bottom->maximum_frame_size; fc_host_supported_speeds(shost) = bottom->supported_speed; -- cgit v0.10.2 From 7687fb9209422d35334995b8ace38de92e595d16 Mon Sep 17 00:00:00 2001 From: "Chauhan, Vijay" Date: Wed, 4 Mar 2009 12:17:54 +0530 Subject: [SCSI] scsi_dh_rdac: Retry mode select for NO_SENSE, ABORTED_COMMAND, UNIT_ATTENTION, NOT_READY(02/04/01) This patch is to add retry for mode select if mode select command is returned with sense NO_SENSE, UNIT_ATTENTION, ABORTED_COMMAND, NOT_READY(02/04/01). This patch reorganise the sense keys from if-else to switch-case format for better maintainability. Signed-off-by: Vijay Chauhan Acked-by: Chandra Seetharaman Signed-off-by: James Bottomley diff --git a/drivers/scsi/device_handler/scsi_dh_rdac.c b/drivers/scsi/device_handler/scsi_dh_rdac.c index f2b9d19..07962f6 100644 --- a/drivers/scsi/device_handler/scsi_dh_rdac.c +++ b/drivers/scsi/device_handler/scsi_dh_rdac.c @@ -449,28 +449,40 @@ static int mode_select_handle_sense(struct scsi_device *sdev, unsigned char *sensebuf) { struct scsi_sense_hdr sense_hdr; - int sense, err = SCSI_DH_IO, ret; + int err = SCSI_DH_IO, ret; ret = scsi_normalize_sense(sensebuf, SCSI_SENSE_BUFFERSIZE, &sense_hdr); if (!ret) goto done; err = SCSI_DH_OK; - sense = (sense_hdr.sense_key << 16) | (sense_hdr.asc << 8) | - sense_hdr.ascq; - /* If it is retryable failure, submit the c9 inquiry again */ - if (sense == 0x59136 || sense == 0x68b02 || sense == 0xb8b02 || - sense == 0x62900) { - /* 0x59136 - Command lock contention - * 0x[6b]8b02 - Quiesense in progress or achieved - * 0x62900 - Power On, Reset, or Bus Device Reset - */ + + switch (sense_hdr.sense_key) { + case NO_SENSE: + case ABORTED_COMMAND: + case UNIT_ATTENTION: err = SCSI_DH_RETRY; + break; + case NOT_READY: + if (sense_hdr.asc == 0x04 && sense_hdr.ascq == 0x01) + /* LUN Not Ready and is in the Process of Becoming + * Ready + */ + err = SCSI_DH_RETRY; + break; + case ILLEGAL_REQUEST: + if (sense_hdr.asc == 0x91 && sense_hdr.ascq == 0x36) + /* + * Command Lock contention + */ + err = SCSI_DH_RETRY; + break; + default: + sdev_printk(KERN_INFO, sdev, + "MODE_SELECT failed with sense %02x/%02x/%02x.\n", + sense_hdr.sense_key, sense_hdr.asc, sense_hdr.ascq); } - if (sense) - sdev_printk(KERN_INFO, sdev, - "MODE_SELECT failed with sense 0x%x.\n", sense); done: return err; } -- cgit v0.10.2 From 211c738d86f3f423f1b218ab3a356c9538e38047 Mon Sep 17 00:00:00 2001 From: Yi Zou Date: Fri, 27 Feb 2009 14:06:37 -0800 Subject: [SCSI] net, fcoe: add ETH_P_FCOE for Fibre Channel over Ethernet (FCoE) This adds eth type ETH_P_FCOE for Fibre Channel over Ethernet (FCoE), consequently, the ETH_P_FCOE from fc_fcoe.h and fcoe skb->protocol is not set as ETH_P_FCOE. Signed-off-by: Yi Zou Acked-by: David Miller Signed-off-by: James Bottomley diff --git a/drivers/scsi/fcoe/libfcoe.c b/drivers/scsi/fcoe/libfcoe.c index 5548bf3..a99a428 100644 --- a/drivers/scsi/fcoe/libfcoe.c +++ b/drivers/scsi/fcoe/libfcoe.c @@ -460,7 +460,7 @@ int fcoe_xmit(struct fc_lport *lp, struct fc_frame *fp) skb_reset_mac_header(skb); skb_reset_network_header(skb); skb->mac_len = elen; - skb->protocol = htons(ETH_P_802_3); + skb->protocol = htons(ETH_P_FCOE); skb->dev = fc->real_dev; /* fill up mac and fcoe headers */ diff --git a/include/linux/if_ether.h b/include/linux/if_ether.h index 7f3c735..59d197c 100644 --- a/include/linux/if_ether.h +++ b/include/linux/if_ether.h @@ -78,6 +78,7 @@ #define ETH_P_PAE 0x888E /* Port Access Entity (IEEE 802.1X) */ #define ETH_P_AOE 0x88A2 /* ATA over Ethernet */ #define ETH_P_TIPC 0x88CA /* TIPC */ +#define ETH_P_FCOE 0x8906 /* Fibre Channel over Ethernet */ #define ETH_P_EDSA 0xDADA /* Ethertype DSA [ NOT AN OFFICIALLY REGISTERED ID ] */ /* diff --git a/include/scsi/fc/fc_fcoe.h b/include/scsi/fc/fc_fcoe.h index f271d9c..ccb3dbe 100644 --- a/include/scsi/fc/fc_fcoe.h +++ b/include/scsi/fc/fc_fcoe.h @@ -25,13 +25,6 @@ */ /* - * The FCoE ethertype eventually goes in net/if_ether.h. - */ -#ifndef ETH_P_FCOE -#define ETH_P_FCOE 0x8906 /* FCOE ether type */ -#endif - -/* * FC_FCOE_OUI hasn't been standardized yet. XXX TBD. */ #ifndef FC_FCOE_OUI -- cgit v0.10.2 From 43eb99c5b349b188f82725652f3d1018c619d682 Mon Sep 17 00:00:00 2001 From: Chris Leech Date: Fri, 27 Feb 2009 14:06:43 -0800 Subject: [SCSI] net: reclaim 8 upper bits of the netdev->features from GSO Reclaim 8 upper bits of netdev->features from GSO. Signed-off-by: Chris Leech Signed-off-by: Yi Zou Acked-by: David Miller Signed-off-by: James Bottomley diff --git a/drivers/net/xen-netfront.c b/drivers/net/xen-netfront.c index cd6184e..2ce536f 100644 --- a/drivers/net/xen-netfront.c +++ b/drivers/net/xen-netfront.c @@ -1511,7 +1511,7 @@ static int xennet_set_tso(struct net_device *dev, u32 data) static void xennet_set_features(struct net_device *dev) { /* Turn off all GSO bits except ROBUST. */ - dev->features &= (1 << NETIF_F_GSO_SHIFT) - 1; + dev->features &= ~NETIF_F_GSO_MASK; dev->features |= NETIF_F_GSO_ROBUST; xennet_set_sg(dev, 0); diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h index ec54785..c8238d9 100644 --- a/include/linux/netdevice.h +++ b/include/linux/netdevice.h @@ -652,7 +652,7 @@ struct net_device /* Segmentation offload features */ #define NETIF_F_GSO_SHIFT 16 -#define NETIF_F_GSO_MASK 0xffff0000 +#define NETIF_F_GSO_MASK 0x00ff0000 #define NETIF_F_TSO (SKB_GSO_TCPV4 << NETIF_F_GSO_SHIFT) #define NETIF_F_UFO (SKB_GSO_UDP << NETIF_F_GSO_SHIFT) #define NETIF_F_GSO_ROBUST (SKB_GSO_DODGY << NETIF_F_GSO_SHIFT) -- cgit v0.10.2 From 01d5b2fca1fa58ed5039239fd531e9f658971ace Mon Sep 17 00:00:00 2001 From: Chris Leech Date: Fri, 27 Feb 2009 14:06:49 -0800 Subject: [SCSI] net: define feature flags for FCoE offloads Define feature flags for FCoE offloads. Signed-off-by: Chris Leech Signed-off-by: Yi Zou Acked-by: David Miller Signed-off-by: James Bottomley diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h index c8238d9..5c40557 100644 --- a/include/linux/netdevice.h +++ b/include/linux/netdevice.h @@ -650,6 +650,8 @@ struct net_device #define NETIF_F_GRO 16384 /* Generic receive offload */ #define NETIF_F_LRO 32768 /* large receive offload */ +#define NETIF_F_FCOE_CRC (1 << 24) /* FCoE CRC32 */ + /* Segmentation offload features */ #define NETIF_F_GSO_SHIFT 16 #define NETIF_F_GSO_MASK 0x00ff0000 @@ -658,6 +660,7 @@ struct net_device #define NETIF_F_GSO_ROBUST (SKB_GSO_DODGY << NETIF_F_GSO_SHIFT) #define NETIF_F_TSO_ECN (SKB_GSO_TCP_ECN << NETIF_F_GSO_SHIFT) #define NETIF_F_TSO6 (SKB_GSO_TCPV6 << NETIF_F_GSO_SHIFT) +#define NETIF_F_FSO (SKB_GSO_FCOE << NETIF_F_GSO_SHIFT) /* List of features with software fallbacks. */ #define NETIF_F_GSO_SOFTWARE (NETIF_F_TSO | NETIF_F_TSO_ECN | NETIF_F_TSO6) diff --git a/include/linux/skbuff.h b/include/linux/skbuff.h index 9dcf956..02adea2 100644 --- a/include/linux/skbuff.h +++ b/include/linux/skbuff.h @@ -188,6 +188,8 @@ enum { SKB_GSO_TCP_ECN = 1 << 3, SKB_GSO_TCPV6 = 1 << 4, + + SKB_GSO_FCOE = 1 << 5, }; #if BITS_PER_LONG > 32 -- cgit v0.10.2 From 1c8dbcf6496c2612d883a8bc6bccc38000e14866 Mon Sep 17 00:00:00 2001 From: Yi Zou Date: Fri, 27 Feb 2009 14:06:54 -0800 Subject: [SCSI] net: add NETIF_F_FCOE_CRC to can_checksum_protocol Add FC CRC offload check for ETH_P_FCOE. Signed-off-by: Yi Zou Acked-by: David Miller Signed-off-by: James Bottomley diff --git a/net/core/dev.c b/net/core/dev.c index 72b0d26f..3d36706 100644 --- a/net/core/dev.c +++ b/net/core/dev.c @@ -1457,7 +1457,9 @@ static bool can_checksum_protocol(unsigned long features, __be16 protocol) ((features & NETIF_F_IP_CSUM) && protocol == htons(ETH_P_IP)) || ((features & NETIF_F_IPV6_CSUM) && - protocol == htons(ETH_P_IPV6))); + protocol == htons(ETH_P_IPV6)) || + ((features & NETIF_F_FCOE_CRC) && + protocol == htons(ETH_P_FCOE))); } static bool dev_can_checksum(struct net_device *dev, struct sk_buff *skb) -- cgit v0.10.2 From 4d288d5767f853bfca25adc7b6030dc95518cb2e Mon Sep 17 00:00:00 2001 From: Yi Zou Date: Fri, 27 Feb 2009 14:06:59 -0800 Subject: [SCSI] net: add FCoE offload support through net_device This adds support to provide Fiber Channel over Ethernet (FCoE) offload through net_device's net_device_ops struct. The offload through net_device for FCoE is enabled in kernel as built-in or module driver. Signed-off-by: Yi Zou Acked-by: David Miller Signed-off-by: James Bottomley diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h index 5c40557..7ed49f5 100644 --- a/include/linux/netdevice.h +++ b/include/linux/netdevice.h @@ -582,6 +582,14 @@ struct net_device_ops { #define HAVE_NETDEV_POLL void (*ndo_poll_controller)(struct net_device *dev); #endif +#if defined(CONFIG_FCOE) || defined(CONFIG_FCOE_MODULE) + int (*ndo_fcoe_ddp_setup)(struct net_device *dev, + u16 xid, + struct scatterlist *sgl, + unsigned int sgc); + int (*ndo_fcoe_ddp_done)(struct net_device *dev, + u16 xid); +#endif }; /* @@ -843,6 +851,11 @@ struct net_device struct dcbnl_rtnl_ops *dcbnl_ops; #endif +#if defined(CONFIG_FCOE) || defined(CONFIG_FCOE_MODULE) + /* max exchange id for FCoE LRO by ddp */ + unsigned int fcoe_ddp_xid; +#endif + #ifdef CONFIG_COMPAT_NET_DEV_OPS struct { int (*init)(struct net_device *dev); -- cgit v0.10.2 From ea1e9a9df5e1fde7ad8878c85b4a097cad0ddcea Mon Sep 17 00:00:00 2001 From: Yi Zou Date: Fri, 27 Feb 2009 14:07:04 -0800 Subject: [SCSI] fcoe, libfc: check offload features from LLD through netdev This checks if net_devices supports FCoE offload ops in netdev_ops and it if it does, then sets up the corresponding flags in the associated fc_lport. For large send offload, the maximum length supported in one large send is now described by the added lso_max in fc_lport, which is setup initially from netdev->gso_max_size. Signed-off-by: Yi Zou Signed-off-by: James Bottomley diff --git a/drivers/scsi/fcoe/fcoe_sw.c b/drivers/scsi/fcoe/fcoe_sw.c index da210eb..d99217d 100644 --- a/drivers/scsi/fcoe/fcoe_sw.c +++ b/drivers/scsi/fcoe/fcoe_sw.c @@ -133,6 +133,13 @@ static int fcoe_sw_lport_config(struct fc_lport *lp) /* lport fc_lport related configuration */ fc_lport_config(lp); + /* offload related configuration */ + lp->crc_offload = 0; + lp->seq_offload = 0; + lp->lro_enabled = 0; + lp->lro_xid = 0; + lp->lso_max = 0; + return 0; } @@ -186,7 +193,27 @@ static int fcoe_sw_netdev_config(struct fc_lport *lp, struct net_device *netdev) if (fc->real_dev->features & NETIF_F_SG) lp->sg_supp = 1; - +#ifdef NETIF_F_FCOE_CRC + if (netdev->features & NETIF_F_FCOE_CRC) { + lp->crc_offload = 1; + printk(KERN_DEBUG "fcoe:%s supports FCCRC offload\n", + netdev->name); + } +#endif +#ifdef NETIF_F_FSO + if (netdev->features & NETIF_F_FSO) { + lp->seq_offload = 1; + lp->lso_max = netdev->gso_max_size; + printk(KERN_DEBUG "fcoe:%s supports LSO for max len 0x%x\n", + netdev->name, lp->lso_max); + } +#endif + if (netdev->fcoe_ddp_xid) { + lp->lro_enabled = 1; + lp->lro_xid = netdev->fcoe_ddp_xid; + printk(KERN_DEBUG "fcoe:%s supports LRO for max xid 0x%x\n", + netdev->name, lp->lro_xid); + } skb_queue_head_init(&fc->fcoe_pending_queue); fc->fcoe_pending_queue_active = 0; diff --git a/include/scsi/libfc.h b/include/scsi/libfc.h index a2e126b..61c746c 100644 --- a/include/scsi/libfc.h +++ b/include/scsi/libfc.h @@ -654,6 +654,7 @@ struct fc_lport { u16 link_speed; u16 link_supported_speeds; u16 lro_xid; /* max xid for fcoe lro */ + unsigned int lso_max; /* max large send size */ struct fc_ns_fts fcts; /* FC-4 type masks */ struct fc_els_rnid_gen rnid_gen; /* RNID information */ -- cgit v0.10.2 From 276d68142b7b676594ab8739355c27e9e5b3d41d Mon Sep 17 00:00:00 2001 From: Yi Zou Date: Fri, 27 Feb 2009 14:07:10 -0800 Subject: [SCSI] libfc: use lso_max for sequence offload Make sure for large send is supported by LLD in outgoing FCP data, we are only sending the lso_max a time in one single large send, since that is what supported by LLD. Signed-off-by: Yi Zou Signed-off-by: James Bottomley diff --git a/drivers/scsi/libfc/fc_fcp.c b/drivers/scsi/libfc/fc_fcp.c index a070e57..48adb89 100644 --- a/drivers/scsi/libfc/fc_fcp.c +++ b/drivers/scsi/libfc/fc_fcp.c @@ -435,7 +435,13 @@ static int fc_fcp_send_data(struct fc_fcp_pkt *fsp, struct fc_seq *seq, * burst length (t_blen) to seq_blen, otherwise set t_blen * to max FC frame payload previously set in fsp->max_payload. */ - t_blen = lp->seq_offload ? seq_blen : fsp->max_payload; + t_blen = fsp->max_payload; + if (lp->seq_offload) { + t_blen = min(seq_blen, (size_t)lp->lso_max); + FC_DEBUG_FCP("fsp=%p:lso:blen=%zx lso_max=0x%x t_blen=%zx\n", + fsp, seq_blen, lp->lso_max, t_blen); + } + WARN_ON(t_blen < FC_MIN_MAX_PAYLOAD); if (t_blen > 512) t_blen &= ~(512 - 1); /* round down to block size */ -- cgit v0.10.2 From 39ca9a065a5a0a6f2f0cd648090a979ba3f4f018 Mon Sep 17 00:00:00 2001 From: Yi Zou Date: Fri, 27 Feb 2009 14:07:15 -0800 Subject: [SCSI] fcoe: add support to large send by gso through net_device for fcoe_sw Change fcoe_xmit to setup gso for LLD LSO offload as well as CRC offload Signed-off-by: Yi Zou Signed-off-by: James Bottomley diff --git a/drivers/scsi/fcoe/libfcoe.c b/drivers/scsi/fcoe/libfcoe.c index a99a428..5dae823 100644 --- a/drivers/scsi/fcoe/libfcoe.c +++ b/drivers/scsi/fcoe/libfcoe.c @@ -423,7 +423,7 @@ int fcoe_xmit(struct fc_lport *lp, struct fc_frame *fp) /* crc offload */ if (likely(lp->crc_offload)) { - skb->ip_summed = CHECKSUM_COMPLETE; + skb->ip_summed = CHECKSUM_PARTIAL; skb->csum_start = skb_headroom(skb); skb->csum_offset = skb->len; crc = 0; @@ -483,6 +483,16 @@ int fcoe_xmit(struct fc_lport *lp, struct fc_frame *fp) FC_FCOE_ENCAPS_VER(hp, FC_FCOE_VER); hp->fcoe_sof = sof; +#ifdef NETIF_F_FSO + /* fcoe lso, mss is in max_payload which is non-zero for FCP data */ + if (lp->seq_offload && fr_max_payload(fp)) { + skb_shinfo(skb)->gso_type = SKB_GSO_FCOE; + skb_shinfo(skb)->gso_size = fr_max_payload(fp); + } else { + skb_shinfo(skb)->gso_type = 0; + skb_shinfo(skb)->gso_size = 0; + } +#endif /* update tx stats: regardless if LLD fails */ stats = lp->dev_stats[smp_processor_id()]; if (stats) { -- cgit v0.10.2 From b277d2aa9a4d969002c4157bf77b76b9ad9ca04a Mon Sep 17 00:00:00 2001 From: Yi Zou Date: Fri, 27 Feb 2009 14:07:21 -0800 Subject: [SCSI] libfc: add support of large receive offload by ddp in fc_fcp When LLD supports direct data placement (ddp) for large receive of an scsi i/o coming into fc_fcp, we call into libfc_function_template's ddp_setup() to prepare for a ddp of large receive for this read I/O. When I/O is complete, we call the corresponding ddp_done() to get the length of data ddped as well as to let LLD do clean up. fc_fcp_ddp_setup()/fc_fcp_ddp_done() are added to setup and complete a ddped read I/O described by the given fc_fcp_pkt. They would call into corresponding ddp_setup/ddp_done implemented by the fcoe layer. Eventually, fcoe layer calls into LLD's ddp_setup/ddp_done provided through net_device Signed-off-by: Yi Zou Signed-off-by: James Bottomley diff --git a/drivers/scsi/libfc/fc_exch.c b/drivers/scsi/libfc/fc_exch.c index 8a0c5c2..992af05 100644 --- a/drivers/scsi/libfc/fc_exch.c +++ b/drivers/scsi/libfc/fc_exch.c @@ -489,7 +489,7 @@ static u16 fc_em_alloc_xid(struct fc_exch_mgr *mp, const struct fc_frame *fp) struct fc_exch *ep = NULL; if (mp->max_read) { - if (fc_frame_is_read(fp)) { + if (fc_fcp_is_read(fr_fsp(fp))) { min = mp->min_xid; max = mp->max_read; plast = &mp->last_read; @@ -1841,6 +1841,8 @@ struct fc_seq *fc_exch_seq_send(struct fc_lport *lp, fc_exch_setup_hdr(ep, fp, ep->f_ctl); sp->cnt++; + fc_fcp_ddp_setup(fr_fsp(fp), ep->xid); + if (unlikely(lp->tt.frame_send(lp, fp))) goto err; diff --git a/drivers/scsi/libfc/fc_fcp.c b/drivers/scsi/libfc/fc_fcp.c index 48adb89..a5725f3 100644 --- a/drivers/scsi/libfc/fc_fcp.c +++ b/drivers/scsi/libfc/fc_fcp.c @@ -265,6 +265,56 @@ static void fc_fcp_retry_cmd(struct fc_fcp_pkt *fsp) } /* + * fc_fcp_ddp_setup - calls to LLD's ddp_setup to set up DDP + * transfer for a read I/O indicated by the fc_fcp_pkt. + * @fsp: ptr to the fc_fcp_pkt + * + * This is called in exch_seq_send() when we have a newly allocated + * exchange with a valid exchange id to setup ddp. + * + * returns: none + */ +void fc_fcp_ddp_setup(struct fc_fcp_pkt *fsp, u16 xid) +{ + struct fc_lport *lp; + + if (!fsp) + return; + + lp = fsp->lp; + if ((fsp->req_flags & FC_SRB_READ) && + (lp->lro_enabled) && (lp->tt.ddp_setup)) { + if (lp->tt.ddp_setup(lp, xid, scsi_sglist(fsp->cmd), + scsi_sg_count(fsp->cmd))) + fsp->xfer_ddp = xid; + } +} +EXPORT_SYMBOL(fc_fcp_ddp_setup); + +/* + * fc_fcp_ddp_done - calls to LLD's ddp_done to release any + * DDP related resources for this I/O if it is initialized + * as a ddp transfer + * @fsp: ptr to the fc_fcp_pkt + * + * returns: none + */ +static void fc_fcp_ddp_done(struct fc_fcp_pkt *fsp) +{ + struct fc_lport *lp; + + if (!fsp) + return; + + lp = fsp->lp; + if (fsp->xfer_ddp && lp->tt.ddp_done) { + fsp->xfer_len = lp->tt.ddp_done(lp, fsp->xfer_ddp); + fsp->xfer_ddp = 0; + } +} + + +/* * Receive SCSI data from target. * Called after receiving solicited data. */ @@ -289,6 +339,9 @@ static void fc_fcp_recv_data(struct fc_fcp_pkt *fsp, struct fc_frame *fp) len = fr_len(fp) - sizeof(*fh); buf = fc_frame_payload_get(fp, 0); + /* if this I/O is ddped, update xfer len */ + fc_fcp_ddp_done(fsp); + if (offset + len > fsp->data_len) { /* this should never happen */ if ((fr_flags(fp) & FCPHF_CRC_UNCHECKED) && @@ -750,6 +803,9 @@ static void fc_fcp_resp(struct fc_fcp_pkt *fsp, struct fc_frame *fp) fsp->scsi_comp_flags = flags; expected_len = fsp->data_len; + /* if ddp, update xfer len */ + fc_fcp_ddp_done(fsp); + if (unlikely((flags & ~FCP_CONF_REQ) || fc_rp->fr_status)) { rp_ex = (void *)(fc_rp + 1); if (flags & (FCP_RSP_LEN_VAL | FCP_SNS_LEN_VAL)) { @@ -1012,7 +1068,7 @@ static int fc_fcp_cmd_send(struct fc_lport *lp, struct fc_fcp_pkt *fsp, } memcpy(fc_frame_payload_get(fp, len), &fsp->cdb_cmd, len); - fr_cmd(fp) = fsp->cmd; + fr_fsp(fp) = fsp; rport = fsp->rport; fsp->max_payload = rport->maxframe_size; rp = rport->dd_data; @@ -1746,6 +1802,9 @@ static void fc_io_compl(struct fc_fcp_pkt *fsp) struct fc_lport *lp; unsigned long flags; + /* release outstanding ddp context */ + fc_fcp_ddp_done(fsp); + fsp->state |= FC_SRB_COMPL; if (!(fsp->state & FC_SRB_FCP_PROCESSING_TMO)) { spin_unlock_bh(&fsp->scsi_pkt_lock); diff --git a/include/scsi/fc_frame.h b/include/scsi/fc_frame.h index 04d34a7..5951105 100644 --- a/include/scsi/fc_frame.h +++ b/include/scsi/fc_frame.h @@ -54,8 +54,7 @@ #define fr_eof(fp) (fr_cb(fp)->fr_eof) #define fr_flags(fp) (fr_cb(fp)->fr_flags) #define fr_max_payload(fp) (fr_cb(fp)->fr_max_payload) -#define fr_cmd(fp) (fr_cb(fp)->fr_cmd) -#define fr_dir(fp) (fr_cmd(fp)->sc_data_direction) +#define fr_fsp(fp) (fr_cb(fp)->fr_fsp) #define fr_crc(fp) (fr_cb(fp)->fr_crc) struct fc_frame { @@ -66,7 +65,7 @@ struct fcoe_rcv_info { struct packet_type *ptype; struct fc_lport *fr_dev; /* transport layer private pointer */ struct fc_seq *fr_seq; /* for use with exchange manager */ - struct scsi_cmnd *fr_cmd; /* for use of scsi command */ + struct fc_fcp_pkt *fr_fsp; /* for the corresponding fcp I/O */ u32 fr_crc; u16 fr_max_payload; /* max FC payload */ enum fc_sof fr_sof; /* start of frame delimiter */ @@ -218,20 +217,6 @@ static inline bool fc_frame_is_cmd(const struct fc_frame *fp) return fc_frame_rctl(fp) == FC_RCTL_DD_UNSOL_CMD; } -static inline bool fc_frame_is_read(const struct fc_frame *fp) -{ - if (fc_frame_is_cmd(fp) && fr_cmd(fp)) - return fr_dir(fp) == DMA_FROM_DEVICE; - return false; -} - -static inline bool fc_frame_is_write(const struct fc_frame *fp) -{ - if (fc_frame_is_cmd(fp) && fr_cmd(fp)) - return fr_dir(fp) == DMA_TO_DEVICE; - return false; -} - /* * Check for leaks. * Print the frame header of any currently allocated frame, assuming there diff --git a/include/scsi/libfc.h b/include/scsi/libfc.h index 61c746c..a70eafa 100644 --- a/include/scsi/libfc.h +++ b/include/scsi/libfc.h @@ -245,6 +245,7 @@ struct fc_fcp_pkt { */ struct fcp_cmnd cdb_cmd; size_t xfer_len; + u16 xfer_ddp; /* this xfer is ddped */ u32 xfer_contig_end; /* offset of end of contiguous xfer */ u16 max_payload; /* max payload size in bytes */ @@ -267,6 +268,15 @@ struct fc_fcp_pkt { u8 recov_retry; /* count of recovery retries */ struct fc_seq *recov_seq; /* sequence for REC or SRR */ }; +/* + * FC_FCP HELPER FUNCTIONS + *****************************/ +static inline bool fc_fcp_is_read(const struct fc_fcp_pkt *fsp) +{ + if (fsp && fsp->cmd) + return fsp->cmd->sc_data_direction == DMA_FROM_DEVICE; + return false; +} /* * Structure and function definitions for managing Fibre Channel Exchanges @@ -400,6 +410,21 @@ struct libfc_function_template { void *arg, unsigned int timer_msec); /* + * Sets up the DDP context for a given exchange id on the given + * scatterlist if LLD supports DDP for large receive. + * + * STATUS: OPTIONAL + */ + int (*ddp_setup)(struct fc_lport *lp, u16 xid, + struct scatterlist *sgl, unsigned int sgc); + /* + * Completes the DDP transfer and returns the length of data DDPed + * for the given exchange id. + * + * STATUS: OPTIONAL + */ + int (*ddp_done)(struct fc_lport *lp, u16 xid); + /* * Send a frame using an existing sequence and exchange. * * STATUS: OPTIONAL @@ -822,6 +847,11 @@ int fc_change_queue_type(struct scsi_device *sdev, int tag_type); void fc_fcp_destroy(struct fc_lport *); /* + * Set up direct-data placement for this I/O request + */ +void fc_fcp_ddp_setup(struct fc_fcp_pkt *fsp, u16 xid); + +/* * ELS/CT interface *****************************/ /* diff --git a/include/scsi/libfcoe.h b/include/scsi/libfcoe.h index 941818f..c41f7d0 100644 --- a/include/scsi/libfcoe.h +++ b/include/scsi/libfcoe.h @@ -124,24 +124,6 @@ static inline u16 skb_fc_rxid(const struct sk_buff *skb) return be16_to_cpu(skb_fc_header(skb)->fh_rx_id); } -/* FIXME - DMA_BIDIRECTIONAL ? */ -#define skb_cb(skb) ((struct fcoe_rcv_info *)&((skb)->cb[0])) -#define skb_cmd(skb) (skb_cb(skb)->fr_cmd) -#define skb_dir(skb) (skb_cmd(skb)->sc_data_direction) -static inline bool skb_fc_is_read(const struct sk_buff *skb) -{ - if (skb_fc_is_cmd(skb) && skb_cmd(skb)) - return skb_dir(skb) == DMA_FROM_DEVICE; - return false; -} - -static inline bool skb_fc_is_write(const struct sk_buff *skb) -{ - if (skb_fc_is_cmd(skb) && skb_cmd(skb)) - return skb_dir(skb) == DMA_TO_DEVICE; - return false; -} - /* libfcoe funcs */ int fcoe_reset(struct Scsi_Host *shost); u64 fcoe_wwn_from_mac(unsigned char mac[MAX_ADDR_LEN], -- cgit v0.10.2 From e05620073625935290120be93a6214b1b52ae34f Mon Sep 17 00:00:00 2001 From: Yi Zou Date: Fri, 27 Feb 2009 14:07:26 -0800 Subject: [SCSI] fcoe: add support to FCoE offload support in fcoe_sw through net_device This adds implementation of ddp_setup()/ddp_done() in fcoe_sw for its fcoe_sw_libfc_fcn_templ. Signed-off-by: Yi Zou Signed-off-by: James Bottomley diff --git a/drivers/scsi/fcoe/fcoe_sw.c b/drivers/scsi/fcoe/fcoe_sw.c index d99217d..2bbbe3c 100644 --- a/drivers/scsi/fcoe/fcoe_sw.c +++ b/drivers/scsi/fcoe/fcoe_sw.c @@ -373,8 +373,46 @@ static int fcoe_sw_destroy(struct net_device *netdev) return 0; } +/* + * fcoe_sw_ddp_setup - calls LLD's ddp_setup through net_device + * @lp: the corresponding fc_lport + * @xid: the exchange id for this ddp transfer + * @sgl: the scatterlist describing this transfer + * @sgc: number of sg items + * + * Returns : 0 no ddp + */ +static int fcoe_sw_ddp_setup(struct fc_lport *lp, u16 xid, + struct scatterlist *sgl, unsigned int sgc) +{ + struct net_device *n = fcoe_netdev(lp); + + if (n->netdev_ops && n->netdev_ops->ndo_fcoe_ddp_setup) + return n->netdev_ops->ndo_fcoe_ddp_setup(n, xid, sgl, sgc); + + return 0; +} + +/* + * fcoe_sw_ddp_done - calls LLD's ddp_done through net_device + * @lp: the corresponding fc_lport + * @xid: the exchange id for this ddp transfer + * + * Returns : the length of data that have been completed by ddp + */ +static int fcoe_sw_ddp_done(struct fc_lport *lp, u16 xid) +{ + struct net_device *n = fcoe_netdev(lp); + + if (n->netdev_ops && n->netdev_ops->ndo_fcoe_ddp_done) + return n->netdev_ops->ndo_fcoe_ddp_done(n, xid); + return 0; +} + static struct libfc_function_template fcoe_sw_libfc_fcn_templ = { .frame_send = fcoe_xmit, + .ddp_setup = fcoe_sw_ddp_setup, + .ddp_done = fcoe_sw_ddp_done, }; /** -- cgit v0.10.2 From 07c00ec449d4d94042063a6900d7d04fdc9f8e62 Mon Sep 17 00:00:00 2001 From: Yi Zou Date: Fri, 27 Feb 2009 14:07:31 -0800 Subject: [SCSI] fcoe: fcoe fc crc offload indication by skb->ip_summed If LLD supports FCCRC offload, it should set ip_summed to be CHECKSUM_UNNECESSARY so we don't have to do CRC check again. Signed-off-by: Yi Zou Signed-off-by: James Bottomley diff --git a/drivers/scsi/fcoe/libfcoe.c b/drivers/scsi/fcoe/libfcoe.c index 5dae823..0d6f5be 100644 --- a/drivers/scsi/fcoe/libfcoe.c +++ b/drivers/scsi/fcoe/libfcoe.c @@ -633,7 +633,7 @@ int fcoe_percpu_receive_thread(void *arg) * it's solicited data, in which case, the FCP layer would * check it during the copy. */ - if (lp->crc_offload) + if (lp->crc_offload && skb->ip_summed == CHECKSUM_UNNECESSARY) fr_flags(fp) &= ~FCPHF_CRC_UNCHECKED; else fr_flags(fp) |= FCPHF_CRC_UNCHECKED; -- cgit v0.10.2 From f474a37bc48667595b5653a983b635c95ed82a3b Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Thu, 5 Mar 2009 14:45:55 -0600 Subject: [SCSI] libiscsi: fix iscsi pool error path Memory freeing in iscsi_pool_free() looks wrong to me. Either q->pool can be NULL and this should be tested before dereferencing it, or it can't be NULL and it shouldn't be tested at all. As far as I can see, the only case where q->pool is NULL is on early error in iscsi_pool_init(). One possible way to fix the bug is thus to not call iscsi_pool_free() in this case (nothing needs to be freed anyway) and then we can get rid of the q->pool check. Signed-off-by: Jean Delvare Signed-off-by: Mike Christie Signed-off-by: James Bottomley diff --git a/drivers/scsi/libiscsi.c b/drivers/scsi/libiscsi.c index 809d32d..c33e28f 100644 --- a/drivers/scsi/libiscsi.c +++ b/drivers/scsi/libiscsi.c @@ -1944,7 +1944,7 @@ iscsi_pool_init(struct iscsi_pool *q, int max, void ***items, int item_size) num_arrays++; q->pool = kzalloc(num_arrays * max * sizeof(void*), GFP_KERNEL); if (q->pool == NULL) - goto enomem; + return -ENOMEM; q->queue = kfifo_init((void*)q->pool, max * sizeof(void*), GFP_KERNEL, NULL); @@ -1979,8 +1979,7 @@ void iscsi_pool_free(struct iscsi_pool *q) for (i = 0; i < q->max; i++) kfree(q->pool[i]); - if (q->pool) - kfree(q->pool); + kfree(q->pool); kfree(q->queue); } EXPORT_SYMBOL_GPL(iscsi_pool_free); -- cgit v0.10.2 From 091e6dbec966d0727ae7fb2d5a8a2b8ace09a02e Mon Sep 17 00:00:00 2001 From: Pete Wyckoff Date: Thu, 5 Mar 2009 14:45:56 -0600 Subject: [SCSI] iscsi tcp: bidi capable Mark iscsi_tcp as being capable of bidirectional transfers. The bsg interface checks this bit before attempting any bidirectional commands. Signed-off-by: Pete Wyckoff Signed-off-by: Boaz Harrosh Signed-off-by: Mike Christie Signed-off-by: James Bottomley diff --git a/drivers/scsi/iscsi_tcp.c b/drivers/scsi/iscsi_tcp.c index 23808df..5a08ca4 100644 --- a/drivers/scsi/iscsi_tcp.c +++ b/drivers/scsi/iscsi_tcp.c @@ -813,6 +813,12 @@ static void iscsi_sw_tcp_session_destroy(struct iscsi_cls_session *cls_session) iscsi_host_free(shost); } +static int iscsi_sw_tcp_slave_alloc(struct scsi_device *sdev) +{ + set_bit(QUEUE_FLAG_BIDI, &sdev->request_queue->queue_flags); + return 0; +} + static int iscsi_sw_tcp_slave_configure(struct scsi_device *sdev) { blk_queue_bounce_limit(sdev->request_queue, BLK_BOUNCE_ANY); @@ -833,6 +839,7 @@ static struct scsi_host_template iscsi_sw_tcp_sht = { .eh_device_reset_handler= iscsi_eh_device_reset, .eh_target_reset_handler= iscsi_eh_target_reset, .use_clustering = DISABLE_CLUSTERING, + .slave_alloc = iscsi_sw_tcp_slave_alloc, .slave_configure = iscsi_sw_tcp_slave_configure, .proc_name = "iscsi_tcp", .this_id = -1, -- cgit v0.10.2 From 48a237a26db0a31404c83a88e984b37a30ddcf5a Mon Sep 17 00:00:00 2001 From: Mike Christie Date: Thu, 5 Mar 2009 14:45:57 -0600 Subject: [SCSI] iser: have iser use its own logging iser has its own logging inrfastrucutre. Convert it to use it instead of libiscsi. Signed-off-by: Mike Christie Signed-off-by: James Bottomley diff --git a/drivers/infiniband/ulp/iser/iscsi_iser.c b/drivers/infiniband/ulp/iser/iscsi_iser.c index 1287639..4338f54 100644 --- a/drivers/infiniband/ulp/iser/iscsi_iser.c +++ b/drivers/infiniband/ulp/iser/iscsi_iser.c @@ -168,7 +168,7 @@ iscsi_iser_mtask_xmit(struct iscsi_conn *conn, struct iscsi_task *task) { int error = 0; - debug_scsi("task deq [cid %d itt 0x%x]\n", conn->id, task->itt); + iser_dbg("task deq [cid %d itt 0x%x]\n", conn->id, task->itt); error = iser_send_control(conn, task); @@ -195,7 +195,7 @@ iscsi_iser_task_xmit_unsol_data(struct iscsi_conn *conn, /* Send data-out PDUs while there's still unsolicited data to send */ while (iscsi_task_has_unsol_data(task)) { iscsi_prep_data_out_pdu(task, r2t, &hdr); - debug_scsi("Sending data-out: itt 0x%x, data count %d\n", + iser_dbg("Sending data-out: itt 0x%x, data count %d\n", hdr.itt, r2t->data_count); /* the buffer description has been passed with the command */ @@ -206,7 +206,7 @@ iscsi_iser_task_xmit_unsol_data(struct iscsi_conn *conn, goto iscsi_iser_task_xmit_unsol_data_exit; } r2t->sent += r2t->data_count; - debug_scsi("Need to send %d more as data-out PDUs\n", + iser_dbg("Need to send %d more as data-out PDUs\n", r2t->data_length - r2t->sent); } @@ -227,12 +227,12 @@ iscsi_iser_task_xmit(struct iscsi_task *task) if (task->sc->sc_data_direction == DMA_TO_DEVICE) { BUG_ON(scsi_bufflen(task->sc) == 0); - debug_scsi("cmd [itt %x total %d imm %d unsol_data %d\n", + iser_dbg("cmd [itt %x total %d imm %d unsol_data %d\n", task->itt, scsi_bufflen(task->sc), task->imm_count, task->unsol_r2t.data_length); } - debug_scsi("task deq [cid %d itt 0x%x]\n", + iser_dbg("task deq [cid %d itt 0x%x]\n", conn->id, task->itt); /* Send the cmd PDU */ -- cgit v0.10.2 From 1b2c7af877f427a2b25583c9033616c9ebd30aed Mon Sep 17 00:00:00 2001 From: Mike Christie Date: Thu, 5 Mar 2009 14:45:58 -0600 Subject: [SCSI] libiscsi: replace scsi_debug logging with session/conn logging This makes the logging a compile time option and replaces the scsi_debug macro with session and connection ones that print out a driver model id prefix. Signed-off-by: Mike Christie Signed-off-by: James Bottomley diff --git a/drivers/scsi/libiscsi.c b/drivers/scsi/libiscsi.c index c33e28f..701457c 100644 --- a/drivers/scsi/libiscsi.c +++ b/drivers/scsi/libiscsi.c @@ -38,6 +38,28 @@ #include #include +static int iscsi_dbg_lib; +module_param_named(debug_libiscsi, iscsi_dbg_lib, int, S_IRUGO | S_IWUSR); +MODULE_PARM_DESC(debug_libiscsi, "Turn on debugging for libiscsi module. " + "Set to 1 to turn on, and zero to turn off. Default " + "is off."); + +#define ISCSI_DBG_CONN(_conn, dbg_fmt, arg...) \ + do { \ + if (iscsi_dbg_lib) \ + iscsi_conn_printk(KERN_INFO, _conn, \ + "%s " dbg_fmt, \ + __func__, ##arg); \ + } while (0); + +#define ISCSI_DBG_SESSION(_session, dbg_fmt, arg...) \ + do { \ + if (iscsi_dbg_lib) \ + iscsi_session_printk(KERN_INFO, _session, \ + "%s " dbg_fmt, \ + __func__, ##arg); \ + } while (0); + /* Serial Number Arithmetic, 32 bits, less than, RFC1982 */ #define SNA32_CHECK 2147483648UL @@ -176,10 +198,11 @@ static int iscsi_prep_ecdb_ahs(struct iscsi_task *task) ecdb_ahdr->reserved = 0; memcpy(ecdb_ahdr->ecdb, cmd->cmnd + ISCSI_CDB_SIZE, rlen); - debug_scsi("iscsi_prep_ecdb_ahs: varlen_cdb_len %d " - "rlen %d pad_len %d ahs_length %d iscsi_headers_size %u\n", - cmd->cmd_len, rlen, pad_len, ahslength, task->hdr_len); - + ISCSI_DBG_SESSION(task->conn->session, + "iscsi_prep_ecdb_ahs: varlen_cdb_len %d " + "rlen %d pad_len %d ahs_length %d iscsi_headers_size " + "%u\n", cmd->cmd_len, rlen, pad_len, ahslength, + task->hdr_len); return 0; } @@ -201,10 +224,11 @@ static int iscsi_prep_bidi_ahs(struct iscsi_task *task) rlen_ahdr->reserved = 0; rlen_ahdr->read_length = cpu_to_be32(scsi_in(sc)->length); - debug_scsi("bidi-in rlen_ahdr->read_length(%d) " - "rlen_ahdr->ahslength(%d)\n", - be32_to_cpu(rlen_ahdr->read_length), - be16_to_cpu(rlen_ahdr->ahslength)); + ISCSI_DBG_SESSION(task->conn->session, + "bidi-in rlen_ahdr->read_length(%d) " + "rlen_ahdr->ahslength(%d)\n", + be32_to_cpu(rlen_ahdr->read_length), + be16_to_cpu(rlen_ahdr->ahslength)); return 0; } @@ -335,13 +359,15 @@ static int iscsi_prep_scsi_cmd_pdu(struct iscsi_task *task) list_move_tail(&task->running, &conn->run_list); conn->scsicmd_pdus_cnt++; - debug_scsi("iscsi prep [%s cid %d sc %p cdb 0x%x itt 0x%x len %d " - "bidi_len %d cmdsn %d win %d]\n", scsi_bidi_cmnd(sc) ? - "bidirectional" : sc->sc_data_direction == DMA_TO_DEVICE ? - "write" : "read", conn->id, sc, sc->cmnd[0], task->itt, - scsi_bufflen(sc), - scsi_bidi_cmnd(sc) ? scsi_in(sc)->length : 0, - session->cmdsn, session->max_cmdsn - session->exp_cmdsn + 1); + ISCSI_DBG_SESSION(session, "iscsi prep [%s cid %d sc %p cdb 0x%x " + "itt 0x%x len %d bidi_len %d cmdsn %d win %d]\n", + scsi_bidi_cmnd(sc) ? "bidirectional" : + sc->sc_data_direction == DMA_TO_DEVICE ? + "write" : "read", conn->id, sc, sc->cmnd[0], + task->itt, scsi_bufflen(sc), + scsi_bidi_cmnd(sc) ? scsi_in(sc)->length : 0, + session->cmdsn, + session->max_cmdsn - session->exp_cmdsn + 1); return 0; } @@ -483,9 +509,9 @@ static int iscsi_prep_mgmt_task(struct iscsi_conn *conn, task->state = ISCSI_TASK_RUNNING; list_move_tail(&task->running, &conn->mgmt_run_list); - debug_scsi("mgmtpdu [op 0x%x hdr->itt 0x%x datalen %d]\n", - hdr->opcode & ISCSI_OPCODE_MASK, hdr->itt, - task->data_count); + ISCSI_DBG_SESSION(session, "mgmtpdu [op 0x%x hdr->itt 0x%x " + "datalen %d]\n", hdr->opcode & ISCSI_OPCODE_MASK, + hdr->itt, task->data_count); return 0; } @@ -637,8 +663,9 @@ invalid_datalen: memcpy(sc->sense_buffer, data + 2, min_t(uint16_t, senselen, SCSI_SENSE_BUFFERSIZE)); - debug_scsi("copied %d bytes of sense\n", - min_t(uint16_t, senselen, SCSI_SENSE_BUFFERSIZE)); + ISCSI_DBG_SESSION(session, "copied %d bytes of sense\n", + min_t(uint16_t, senselen, + SCSI_SENSE_BUFFERSIZE)); } if (rhdr->flags & (ISCSI_FLAG_CMD_BIDI_UNDERFLOW | @@ -666,8 +693,8 @@ invalid_datalen: sc->result = (DID_BAD_TARGET << 16) | rhdr->cmd_status; } out: - debug_scsi("done [sc %lx res %d itt 0x%x]\n", - (long)sc, sc->result, task->itt); + ISCSI_DBG_SESSION(session, "done [sc %p res %d itt 0x%x]\n", + sc, sc->result, task->itt); conn->scsirsp_pdus_cnt++; __iscsi_put_task(task); @@ -835,8 +862,8 @@ int __iscsi_complete_pdu(struct iscsi_conn *conn, struct iscsi_hdr *hdr, else itt = ~0U; - debug_scsi("[op 0x%x cid %d itt 0x%x len %d]\n", - opcode, conn->id, itt, datalen); + ISCSI_DBG_SESSION(session, "[op 0x%x cid %d itt 0x%x len %d]\n", + opcode, conn->id, itt, datalen); if (itt == ~0U) { iscsi_update_cmdsn(session, (struct iscsi_nopin*)hdr); @@ -1095,10 +1122,10 @@ static int iscsi_check_cmdsn_window_closed(struct iscsi_conn *conn) * Check for iSCSI window and take care of CmdSN wrap-around */ if (!iscsi_sna_lte(session->queued_cmdsn, session->max_cmdsn)) { - debug_scsi("iSCSI CmdSN closed. ExpCmdSn %u MaxCmdSN %u " - "CmdSN %u/%u\n", session->exp_cmdsn, - session->max_cmdsn, session->cmdsn, - session->queued_cmdsn); + ISCSI_DBG_SESSION(session, "iSCSI CmdSN closed. ExpCmdSn " + "%u MaxCmdSN %u CmdSN %u/%u\n", + session->exp_cmdsn, session->max_cmdsn, + session->cmdsn, session->queued_cmdsn); return -ENOSPC; } return 0; @@ -1152,7 +1179,7 @@ static int iscsi_data_xmit(struct iscsi_conn *conn) spin_lock_bh(&conn->session->lock); if (unlikely(conn->suspend_tx)) { - debug_scsi("conn %d Tx suspended!\n", conn->id); + ISCSI_DBG_SESSION(conn->session, "Tx suspended!\n"); spin_unlock_bh(&conn->session->lock); return -ENODATA; } @@ -1398,7 +1425,8 @@ prepd_reject: iscsi_complete_command(task); reject: spin_unlock(&session->lock); - debug_scsi("cmd 0x%x rejected (%d)\n", sc->cmnd[0], reason); + ISCSI_DBG_SESSION(session, "cmd 0x%x rejected (%d)\n", + sc->cmnd[0], reason); spin_lock(host->host_lock); return SCSI_MLQUEUE_TARGET_BUSY; @@ -1407,7 +1435,8 @@ prepd_fault: iscsi_complete_command(task); fault: spin_unlock(&session->lock); - debug_scsi("iscsi: cmd 0x%x is not queued (%d)\n", sc->cmnd[0], reason); + ISCSI_DBG_SESSION(session, "iscsi: cmd 0x%x is not queued (%d)\n", + sc->cmnd[0], reason); if (!scsi_bidi_cmnd(sc)) scsi_set_resid(sc, scsi_bufflen(sc)); else { @@ -1457,8 +1486,10 @@ int iscsi_eh_target_reset(struct scsi_cmnd *sc) spin_lock_bh(&session->lock); if (session->state == ISCSI_STATE_TERMINATE) { failed: - debug_scsi("failing target reset: session terminated " - "[CID %d age %d]\n", conn->id, session->age); + iscsi_session_printk(KERN_INFO, session, + "failing target reset: Could not log " + "back into target [age %d]\n", + session->age); spin_unlock_bh(&session->lock); mutex_unlock(&session->eh_mutex); return FAILED; @@ -1472,7 +1503,7 @@ failed: */ iscsi_conn_failure(conn, ISCSI_ERR_CONN_FAILED); - debug_scsi("iscsi_eh_target_reset wait for relogin\n"); + ISCSI_DBG_SESSION(session, "wait for relogin\n"); wait_event_interruptible(conn->ehwait, session->state == ISCSI_STATE_TERMINATE || session->state == ISCSI_STATE_LOGGED_IN || @@ -1501,7 +1532,7 @@ static void iscsi_tmf_timedout(unsigned long data) spin_lock(&session->lock); if (conn->tmf_state == TMF_QUEUED) { conn->tmf_state = TMF_TIMEDOUT; - debug_scsi("tmf timedout\n"); + ISCSI_DBG_SESSION(session, "tmf timedout\n"); /* unblock eh_abort() */ wake_up(&conn->ehwait); } @@ -1521,7 +1552,7 @@ static int iscsi_exec_task_mgmt_fn(struct iscsi_conn *conn, spin_unlock_bh(&session->lock); iscsi_conn_failure(conn, ISCSI_ERR_CONN_FAILED); spin_lock_bh(&session->lock); - debug_scsi("tmf exec failure\n"); + ISCSI_DBG_SESSION(session, "tmf exec failure\n"); return -EPERM; } conn->tmfcmd_pdus_cnt++; @@ -1529,7 +1560,7 @@ static int iscsi_exec_task_mgmt_fn(struct iscsi_conn *conn, conn->tmf_timer.function = iscsi_tmf_timedout; conn->tmf_timer.data = (unsigned long)conn; add_timer(&conn->tmf_timer); - debug_scsi("tmf set timeout\n"); + ISCSI_DBG_SESSION(session, "tmf set timeout\n"); spin_unlock_bh(&session->lock); mutex_unlock(&session->eh_mutex); @@ -1573,16 +1604,18 @@ static void fail_all_commands(struct iscsi_conn *conn, unsigned lun, /* flush pending */ list_for_each_entry_safe(task, tmp, &conn->xmitqueue, running) { if (lun == task->sc->device->lun || lun == -1) { - debug_scsi("failing pending sc %p itt 0x%x\n", - task->sc, task->itt); + ISCSI_DBG_SESSION(conn->session, + "failing pending sc %p itt 0x%x\n", + task->sc, task->itt); fail_command(conn, task, error << 16); } } list_for_each_entry_safe(task, tmp, &conn->requeue, running) { if (lun == task->sc->device->lun || lun == -1) { - debug_scsi("failing requeued sc %p itt 0x%x\n", - task->sc, task->itt); + ISCSI_DBG_SESSION(conn->session, + "failing requeued sc %p itt 0x%x\n", + task->sc, task->itt); fail_command(conn, task, error << 16); } } @@ -1590,8 +1623,9 @@ static void fail_all_commands(struct iscsi_conn *conn, unsigned lun, /* fail all other running */ list_for_each_entry_safe(task, tmp, &conn->run_list, running) { if (lun == task->sc->device->lun || lun == -1) { - debug_scsi("failing in progress sc %p itt 0x%x\n", - task->sc, task->itt); + ISCSI_DBG_SESSION(conn->session, + "failing in progress sc %p itt 0x%x\n", + task->sc, task->itt); fail_command(conn, task, error << 16); } } @@ -1622,7 +1656,7 @@ static enum blk_eh_timer_return iscsi_eh_cmd_timed_out(struct scsi_cmnd *scmd) cls_session = starget_to_session(scsi_target(scmd->device)); session = cls_session->dd_data; - debug_scsi("scsi cmd %p timedout\n", scmd); + ISCSI_DBG_SESSION(session, "scsi cmd %p timedout\n", scmd); spin_lock(&session->lock); if (session->state != ISCSI_STATE_LOGGED_IN) { @@ -1662,8 +1696,8 @@ static enum blk_eh_timer_return iscsi_eh_cmd_timed_out(struct scsi_cmnd *scmd) rc = BLK_EH_RESET_TIMER; done: spin_unlock(&session->lock); - debug_scsi("return %s\n", rc == BLK_EH_RESET_TIMER ? - "timer reset" : "nh"); + ISCSI_DBG_SESSION(session, "return %s\n", rc == BLK_EH_RESET_TIMER ? + "timer reset" : "nh"); return rc; } @@ -1697,13 +1731,13 @@ static void iscsi_check_transport_timeouts(unsigned long data) if (time_before_eq(last_recv + recv_timeout, jiffies)) { /* send a ping to try to provoke some traffic */ - debug_scsi("Sending nopout as ping on conn %p\n", conn); + ISCSI_DBG_CONN(conn, "Sending nopout as ping\n"); iscsi_send_nopout(conn, NULL); next_timeout = conn->last_ping + (conn->ping_timeout * HZ); } else next_timeout = last_recv + recv_timeout; - debug_scsi("Setting next tmo %lu\n", next_timeout); + ISCSI_DBG_CONN(conn, "Setting next tmo %lu\n", next_timeout); mod_timer(&conn->transport_timer, next_timeout); done: spin_unlock(&session->lock); @@ -1740,7 +1774,8 @@ int iscsi_eh_abort(struct scsi_cmnd *sc) * got the command. */ if (!sc->SCp.ptr) { - debug_scsi("sc never reached iscsi layer or it completed.\n"); + ISCSI_DBG_SESSION(session, "sc never reached iscsi layer or " + "it completed.\n"); spin_unlock_bh(&session->lock); mutex_unlock(&session->eh_mutex); return SUCCESS; @@ -1762,11 +1797,13 @@ int iscsi_eh_abort(struct scsi_cmnd *sc) age = session->age; task = (struct iscsi_task *)sc->SCp.ptr; - debug_scsi("aborting [sc %p itt 0x%x]\n", sc, task->itt); + ISCSI_DBG_SESSION(session, "aborting [sc %p itt 0x%x]\n", + sc, task->itt); /* task completed before time out */ if (!task->sc) { - debug_scsi("sc completed while abort in progress\n"); + ISCSI_DBG_SESSION(session, "sc completed while abort in " + "progress\n"); goto success; } @@ -1815,7 +1852,8 @@ int iscsi_eh_abort(struct scsi_cmnd *sc) if (!sc->SCp.ptr) { conn->tmf_state = TMF_INITIAL; /* task completed before tmf abort response */ - debug_scsi("sc completed while abort in progress\n"); + ISCSI_DBG_SESSION(session, "sc completed while abort " + "in progress\n"); goto success; } /* fall through */ @@ -1827,15 +1865,16 @@ int iscsi_eh_abort(struct scsi_cmnd *sc) success: spin_unlock_bh(&session->lock); success_unlocked: - debug_scsi("abort success [sc %lx itt 0x%x]\n", (long)sc, task->itt); + ISCSI_DBG_SESSION(session, "abort success [sc %p itt 0x%x]\n", + sc, task->itt); mutex_unlock(&session->eh_mutex); return SUCCESS; failed: spin_unlock_bh(&session->lock); failed_unlocked: - debug_scsi("abort failed [sc %p itt 0x%x]\n", sc, - task ? task->itt : 0); + ISCSI_DBG_SESSION(session, "abort failed [sc %p itt 0x%x]\n", sc, + task ? task->itt : 0); mutex_unlock(&session->eh_mutex); return FAILED; } @@ -1862,7 +1901,8 @@ int iscsi_eh_device_reset(struct scsi_cmnd *sc) cls_session = starget_to_session(scsi_target(sc->device)); session = cls_session->dd_data; - debug_scsi("LU Reset [sc %p lun %u]\n", sc, sc->device->lun); + ISCSI_DBG_SESSION(session, "LU Reset [sc %p lun %u]\n", + sc, sc->device->lun); mutex_lock(&session->eh_mutex); spin_lock_bh(&session->lock); @@ -1916,8 +1956,8 @@ int iscsi_eh_device_reset(struct scsi_cmnd *sc) unlock: spin_unlock_bh(&session->lock); done: - debug_scsi("iscsi_eh_device_reset %s\n", - rc == SUCCESS ? "SUCCESS" : "FAILED"); + ISCSI_DBG_SESSION(session, "dev reset result = %s\n", + rc == SUCCESS ? "SUCCESS" : "FAILED"); mutex_unlock(&session->eh_mutex); return rc; } @@ -2466,14 +2506,16 @@ flush_control_queues(struct iscsi_session *session, struct iscsi_conn *conn) /* handle pending */ list_for_each_entry_safe(task, tmp, &conn->mgmtqueue, running) { - debug_scsi("flushing pending mgmt task itt 0x%x\n", task->itt); + ISCSI_DBG_SESSION(session, "flushing pending mgmt task " + "itt 0x%x\n", task->itt); /* release ref from prep task */ __iscsi_put_task(task); } /* handle running */ list_for_each_entry_safe(task, tmp, &conn->mgmt_run_list, running) { - debug_scsi("flushing running mgmt task itt 0x%x\n", task->itt); + ISCSI_DBG_SESSION(session, "flushing running mgmt task " + "itt 0x%x\n", task->itt); /* release ref from prep task */ __iscsi_put_task(task); } @@ -2523,7 +2565,7 @@ static void iscsi_start_session_recovery(struct iscsi_session *session, conn->datadgst_en = 0; if (session->state == ISCSI_STATE_IN_RECOVERY && old_stop_stage != STOP_CONN_RECOVER) { - debug_scsi("blocking session\n"); + ISCSI_DBG_SESSION(session, "blocking session\n"); iscsi_block_session(session->cls_session); } } diff --git a/include/scsi/libiscsi.h b/include/scsi/libiscsi.h index 7360e19..67542aa 100644 --- a/include/scsi/libiscsi.h +++ b/include/scsi/libiscsi.h @@ -45,13 +45,6 @@ struct iscsi_session; struct iscsi_nopin; struct device; -/* #define DEBUG_SCSI */ -#ifdef DEBUG_SCSI -#define debug_scsi(fmt...) printk(KERN_INFO "iscsi: " fmt) -#else -#define debug_scsi(fmt...) -#endif - #define ISCSI_DEF_XMIT_CMDS_MAX 128 /* must be power of 2 */ #define ISCSI_MGMT_CMDS_MAX 15 -- cgit v0.10.2 From 0ab1c2529e6a70e1b3c63fe9c6b41d4049758a8e Mon Sep 17 00:00:00 2001 From: Mike Christie Date: Thu, 5 Mar 2009 14:45:59 -0600 Subject: [SCSI] libiscsi_tcp: replace tcp_debug/scsi_debug logging with session/conn logging This makes the logging a compile time option and replaces the scsi_debug and tcp_debug macro with session and connection ones that print out a driver model id prefix. Signed-off-by: Mike Christie Signed-off-by: James Bottomley diff --git a/drivers/scsi/libiscsi_tcp.c b/drivers/scsi/libiscsi_tcp.c index e7705d3..91f8ce4 100644 --- a/drivers/scsi/libiscsi_tcp.c +++ b/drivers/scsi/libiscsi_tcp.c @@ -49,13 +49,21 @@ MODULE_AUTHOR("Mike Christie , " "Alex Aizman "); MODULE_DESCRIPTION("iSCSI/TCP data-path"); MODULE_LICENSE("GPL"); -#undef DEBUG_TCP -#ifdef DEBUG_TCP -#define debug_tcp(fmt...) printk(KERN_INFO "tcp: " fmt) -#else -#define debug_tcp(fmt...) -#endif +static int iscsi_dbg_libtcp; +module_param_named(debug_libiscsi_tcp, iscsi_dbg_libtcp, int, + S_IRUGO | S_IWUSR); +MODULE_PARM_DESC(debug_libiscsi_tcp, "Turn on debugging for libiscsi_tcp " + "module. Set to 1 to turn on, and zero to turn off. Default " + "is off."); + +#define ISCSI_DBG_TCP(_conn, dbg_fmt, arg...) \ + do { \ + if (iscsi_dbg_libtcp) \ + iscsi_conn_printk(KERN_INFO, _conn, \ + "%s " dbg_fmt, \ + __func__, ##arg); \ + } while (0); static int iscsi_tcp_hdr_recv_done(struct iscsi_tcp_conn *tcp_conn, struct iscsi_segment *segment); @@ -123,18 +131,13 @@ static void iscsi_tcp_segment_map(struct iscsi_segment *segment, int recv) if (page_count(sg_page(sg)) >= 1 && !recv) return; - debug_tcp("iscsi_tcp_segment_map %s %p\n", recv ? "recv" : "xmit", - segment); segment->sg_mapped = kmap_atomic(sg_page(sg), KM_SOFTIRQ0); segment->data = segment->sg_mapped + sg->offset + segment->sg_offset; } void iscsi_tcp_segment_unmap(struct iscsi_segment *segment) { - debug_tcp("iscsi_tcp_segment_unmap %p\n", segment); - if (segment->sg_mapped) { - debug_tcp("iscsi_tcp_segment_unmap valid\n"); kunmap_atomic(segment->sg_mapped, KM_SOFTIRQ0); segment->sg_mapped = NULL; segment->data = NULL; @@ -180,8 +183,9 @@ int iscsi_tcp_segment_done(struct iscsi_tcp_conn *tcp_conn, struct scatterlist sg; unsigned int pad; - debug_tcp("copied %u %u size %u %s\n", segment->copied, copied, - segment->size, recv ? "recv" : "xmit"); + ISCSI_DBG_TCP(tcp_conn->iscsi_conn, "copied %u %u size %u %s\n", + segment->copied, copied, segment->size, + recv ? "recv" : "xmit"); if (segment->hash && copied) { /* * If a segment is kmapd we must unmap it before sending @@ -214,8 +218,8 @@ int iscsi_tcp_segment_done(struct iscsi_tcp_conn *tcp_conn, iscsi_tcp_segment_unmap(segment); /* Do we have more scatterlist entries? */ - debug_tcp("total copied %u total size %u\n", segment->total_copied, - segment->total_size); + ISCSI_DBG_TCP(tcp_conn->iscsi_conn, "total copied %u total size %u\n", + segment->total_copied, segment->total_size); if (segment->total_copied < segment->total_size) { /* Proceed to the next entry in the scatterlist. */ iscsi_tcp_segment_init_sg(segment, sg_next(segment->sg), @@ -229,7 +233,8 @@ int iscsi_tcp_segment_done(struct iscsi_tcp_conn *tcp_conn, if (!(tcp_conn->iscsi_conn->session->tt->caps & CAP_PADDING_OFFLOAD)) { pad = iscsi_padding(segment->total_copied); if (pad != 0) { - debug_tcp("consume %d pad bytes\n", pad); + ISCSI_DBG_TCP(tcp_conn->iscsi_conn, + "consume %d pad bytes\n", pad); segment->total_size += pad; segment->size = pad; segment->data = segment->padbuf; @@ -278,13 +283,13 @@ iscsi_tcp_segment_recv(struct iscsi_tcp_conn *tcp_conn, while (!iscsi_tcp_segment_done(tcp_conn, segment, 1, copy)) { if (copied == len) { - debug_tcp("iscsi_tcp_segment_recv copied %d bytes\n", - len); + ISCSI_DBG_TCP(tcp_conn->iscsi_conn, + "copied %d bytes\n", len); break; } copy = min(len - copied, segment->size - segment->copied); - debug_tcp("iscsi_tcp_segment_recv copying %d\n", copy); + ISCSI_DBG_TCP(tcp_conn->iscsi_conn, "copying %d\n", copy); memcpy(segment->data + segment->copied, ptr + copied, copy); copied += copy; } @@ -311,7 +316,7 @@ iscsi_tcp_dgst_verify(struct iscsi_tcp_conn *tcp_conn, if (memcmp(segment->recv_digest, segment->digest, segment->digest_len)) { - debug_scsi("digest mismatch\n"); + ISCSI_DBG_TCP(tcp_conn->iscsi_conn, "digest mismatch\n"); return 0; } @@ -355,12 +360,8 @@ iscsi_segment_seek_sg(struct iscsi_segment *segment, struct scatterlist *sg; unsigned int i; - debug_scsi("iscsi_segment_seek_sg offset %u size %llu\n", - offset, size); __iscsi_segment_init(segment, size, done, hash); for_each_sg(sg_list, sg, sg_count, i) { - debug_scsi("sg %d, len %u offset %u\n", i, sg->length, - sg->offset); if (offset < sg->length) { iscsi_tcp_segment_init_sg(segment, sg, offset); return 0; @@ -382,8 +383,9 @@ EXPORT_SYMBOL_GPL(iscsi_segment_seek_sg); */ void iscsi_tcp_hdr_recv_prep(struct iscsi_tcp_conn *tcp_conn) { - debug_tcp("iscsi_tcp_hdr_recv_prep(%p%s)\n", tcp_conn, - tcp_conn->iscsi_conn->hdrdgst_en ? ", digest enabled" : ""); + ISCSI_DBG_TCP(tcp_conn->iscsi_conn, + "(%s)\n", tcp_conn->iscsi_conn->hdrdgst_en ? + "digest enabled" : "digest disabled"); iscsi_segment_init_linear(&tcp_conn->in.segment, tcp_conn->in.hdr_buf, sizeof(struct iscsi_hdr), iscsi_tcp_hdr_recv_done, NULL); @@ -446,7 +448,7 @@ void iscsi_tcp_cleanup_task(struct iscsi_task *task) while (__kfifo_get(tcp_task->r2tqueue, (void*)&r2t, sizeof(void*))) { __kfifo_put(tcp_task->r2tpool.queue, (void*)&r2t, sizeof(void*)); - debug_scsi("iscsi_tcp_cleanup_task pending r2t dropped\n"); + ISCSI_DBG_TCP(task->conn, "pending r2t dropped\n"); } r2t = tcp_task->r2t; @@ -476,8 +478,8 @@ static int iscsi_tcp_data_in(struct iscsi_conn *conn, struct iscsi_task *task) return 0; if (tcp_task->exp_datasn != datasn) { - debug_tcp("%s: task->exp_datasn(%d) != rhdr->datasn(%d)\n", - __func__, tcp_task->exp_datasn, datasn); + ISCSI_DBG_TCP(conn, "task->exp_datasn(%d) != rhdr->datasn(%d)" + "\n", tcp_task->exp_datasn, datasn); return ISCSI_ERR_DATASN; } @@ -485,9 +487,9 @@ static int iscsi_tcp_data_in(struct iscsi_conn *conn, struct iscsi_task *task) tcp_task->data_offset = be32_to_cpu(rhdr->offset); if (tcp_task->data_offset + tcp_conn->in.datalen > total_in_length) { - debug_tcp("%s: data_offset(%d) + data_len(%d) > total_length_in(%d)\n", - __func__, tcp_task->data_offset, - tcp_conn->in.datalen, total_in_length); + ISCSI_DBG_TCP(conn, "data_offset(%d) + data_len(%d) > " + "total_length_in(%d)\n", tcp_task->data_offset, + tcp_conn->in.datalen, total_in_length); return ISCSI_ERR_DATA_OFFSET; } @@ -518,8 +520,8 @@ static int iscsi_tcp_r2t_rsp(struct iscsi_conn *conn, struct iscsi_task *task) } if (tcp_task->exp_datasn != r2tsn){ - debug_tcp("%s: task->exp_datasn(%d) != rhdr->r2tsn(%d)\n", - __func__, tcp_task->exp_datasn, r2tsn); + ISCSI_DBG_TCP(conn, "task->exp_datasn(%d) != rhdr->r2tsn(%d)\n", + tcp_task->exp_datasn, r2tsn); return ISCSI_ERR_R2TSN; } @@ -552,9 +554,9 @@ static int iscsi_tcp_r2t_rsp(struct iscsi_conn *conn, struct iscsi_task *task) } if (r2t->data_length > session->max_burst) - debug_scsi("invalid R2T with data len %u and max burst %u." - "Attempting to execute request.\n", - r2t->data_length, session->max_burst); + ISCSI_DBG_TCP(conn, "invalid R2T with data len %u and max " + "burst %u. Attempting to execute request.\n", + r2t->data_length, session->max_burst); r2t->data_offset = be32_to_cpu(rhdr->data_offset); if (r2t->data_offset + r2t->data_length > scsi_out(task->sc)->length) { @@ -641,8 +643,8 @@ iscsi_tcp_hdr_dissect(struct iscsi_conn *conn, struct iscsi_hdr *hdr) if (rc) return rc; - debug_tcp("opcode 0x%x ahslen %d datalen %d\n", - opcode, ahslen, tcp_conn->in.datalen); + ISCSI_DBG_TCP(conn, "opcode 0x%x ahslen %d datalen %d\n", + opcode, ahslen, tcp_conn->in.datalen); switch(opcode) { case ISCSI_OP_SCSI_DATA_IN: @@ -674,10 +676,10 @@ iscsi_tcp_hdr_dissect(struct iscsi_conn *conn, struct iscsi_hdr *hdr) !(conn->session->tt->caps & CAP_DIGEST_OFFLOAD)) rx_hash = tcp_conn->rx_hash; - debug_tcp("iscsi_tcp_begin_data_in(%p, offset=%d, " - "datalen=%d)\n", tcp_conn, - tcp_task->data_offset, - tcp_conn->in.datalen); + ISCSI_DBG_TCP(conn, "iscsi_tcp_begin_data_in( " + "offset=%d, datalen=%d)\n", + tcp_task->data_offset, + tcp_conn->in.datalen); rc = iscsi_segment_seek_sg(&tcp_conn->in.segment, sdb->table.sgl, sdb->table.nents, @@ -854,10 +856,10 @@ int iscsi_tcp_recv_skb(struct iscsi_conn *conn, struct sk_buff *skb, unsigned int consumed = 0; int rc = 0; - debug_tcp("in %d bytes\n", skb->len - offset); + ISCSI_DBG_TCP(conn, "in %d bytes\n", skb->len - offset); if (unlikely(conn->suspend_rx)) { - debug_tcp("conn %d Rx suspended!\n", conn->id); + ISCSI_DBG_TCP(conn, "Rx suspended!\n"); *status = ISCSI_TCP_SUSPENDED; return 0; } @@ -874,15 +876,16 @@ int iscsi_tcp_recv_skb(struct iscsi_conn *conn, struct sk_buff *skb, avail = skb_seq_read(consumed, &ptr, &seq); if (avail == 0) { - debug_tcp("no more data avail. Consumed %d\n", - consumed); + ISCSI_DBG_TCP(conn, "no more data avail. Consumed %d\n", + consumed); *status = ISCSI_TCP_SKB_DONE; skb_abort_seq_read(&seq); goto skb_done; } BUG_ON(segment->copied >= segment->size); - debug_tcp("skb %p ptr=%p avail=%u\n", skb, ptr, avail); + ISCSI_DBG_TCP(conn, "skb %p ptr=%p avail=%u\n", skb, ptr, + avail); rc = iscsi_tcp_segment_recv(tcp_conn, segment, ptr, avail); BUG_ON(rc == 0); consumed += rc; @@ -895,11 +898,11 @@ int iscsi_tcp_recv_skb(struct iscsi_conn *conn, struct sk_buff *skb, segment_done: *status = ISCSI_TCP_SEGMENT_DONE; - debug_tcp("segment done\n"); + ISCSI_DBG_TCP(conn, "segment done\n"); rc = segment->done(tcp_conn, segment); if (rc != 0) { *status = ISCSI_TCP_CONN_ERR; - debug_tcp("Error receiving PDU, errno=%d\n", rc); + ISCSI_DBG_TCP(conn, "Error receiving PDU, errno=%d\n", rc); iscsi_conn_failure(conn, rc); return 0; } @@ -929,8 +932,7 @@ int iscsi_tcp_task_init(struct iscsi_task *task) * mgmt tasks do not have a scatterlist since they come * in from the iscsi interface. */ - debug_scsi("mtask deq [cid %d itt 0x%x]\n", conn->id, - task->itt); + ISCSI_DBG_TCP(conn, "mtask deq [itt 0x%x]\n", task->itt); return conn->session->tt->init_pdu(task, 0, task->data_count); } @@ -939,9 +941,8 @@ int iscsi_tcp_task_init(struct iscsi_task *task) tcp_task->exp_datasn = 0; /* Prepare PDU, optionally w/ immediate data */ - debug_scsi("task deq [cid %d itt 0x%x imm %d unsol %d]\n", - conn->id, task->itt, task->imm_count, - task->unsol_r2t.data_length); + ISCSI_DBG_TCP(conn, "task deq [itt 0x%x imm %d unsol %d]\n", + task->itt, task->imm_count, task->unsol_r2t.data_length); err = conn->session->tt->init_pdu(task, 0, task->imm_count); if (err) @@ -965,7 +966,8 @@ static struct iscsi_r2t_info *iscsi_tcp_get_curr_r2t(struct iscsi_task *task) r2t = tcp_task->r2t; /* Continue with this R2T? */ if (r2t->data_length <= r2t->sent) { - debug_scsi(" done with r2t %p\n", r2t); + ISCSI_DBG_TCP(task->conn, + " done with r2t %p\n", r2t); __kfifo_put(tcp_task->r2tpool.queue, (void *)&tcp_task->r2t, sizeof(void *)); @@ -1019,7 +1021,7 @@ flush: r2t = iscsi_tcp_get_curr_r2t(task); if (r2t == NULL) { /* Waiting for more R2Ts to arrive. */ - debug_tcp("no R2Ts yet\n"); + ISCSI_DBG_TCP(conn, "no R2Ts yet\n"); return 0; } @@ -1028,9 +1030,9 @@ flush: return rc; iscsi_prep_data_out_pdu(task, r2t, (struct iscsi_data *) task->hdr); - debug_scsi("sol dout %p [dsn %d itt 0x%x doff %d dlen %d]\n", - r2t, r2t->datasn - 1, task->hdr->itt, - r2t->data_offset + r2t->sent, r2t->data_count); + ISCSI_DBG_TCP(conn, "sol dout %p [dsn %d itt 0x%x doff %d dlen %d]\n", + r2t, r2t->datasn - 1, task->hdr->itt, + r2t->data_offset + r2t->sent, r2t->data_count); rc = conn->session->tt->init_pdu(task, r2t->data_offset + r2t->sent, r2t->data_count); -- cgit v0.10.2 From c93f87c727ad4e6a5d94cfab219b1492ccc5ca5e Mon Sep 17 00:00:00 2001 From: Mike Christie Date: Thu, 5 Mar 2009 14:46:00 -0600 Subject: [SCSI] iscsi_tcp: replace scsi_debug/tcp_debug logging with iscsi conn logging This makes the logging a compile time option and replaces the tcp_debug macro with a iscsi connection one that prints out a driver model id prefix. Signed-off-by: Mike Christie Signed-off-by: James Bottomley diff --git a/drivers/scsi/iscsi_tcp.c b/drivers/scsi/iscsi_tcp.c index 5a08ca4..9c2e527 100644 --- a/drivers/scsi/iscsi_tcp.c +++ b/drivers/scsi/iscsi_tcp.c @@ -48,13 +48,6 @@ MODULE_AUTHOR("Mike Christie , " "Alex Aizman "); MODULE_DESCRIPTION("iSCSI/TCP data-path"); MODULE_LICENSE("GPL"); -#undef DEBUG_TCP - -#ifdef DEBUG_TCP -#define debug_tcp(fmt...) printk(KERN_INFO "tcp: " fmt) -#else -#define debug_tcp(fmt...) -#endif static struct scsi_transport_template *iscsi_sw_tcp_scsi_transport; static struct scsi_host_template iscsi_sw_tcp_sht; @@ -63,6 +56,21 @@ static struct iscsi_transport iscsi_sw_tcp_transport; static unsigned int iscsi_max_lun = 512; module_param_named(max_lun, iscsi_max_lun, uint, S_IRUGO); +static int iscsi_sw_tcp_dbg; +module_param_named(debug_iscsi_tcp, iscsi_sw_tcp_dbg, int, + S_IRUGO | S_IWUSR); +MODULE_PARM_DESC(debug_iscsi_tcp, "Turn on debugging for iscsi_tcp module " + "Set to 1 to turn on, and zero to turn off. Default is off."); + +#define ISCSI_SW_TCP_DBG(_conn, dbg_fmt, arg...) \ + do { \ + if (iscsi_sw_tcp_dbg) \ + iscsi_conn_printk(KERN_INFO, _conn, \ + "%s " dbg_fmt, \ + __func__, ##arg); \ + } while (0); + + /** * iscsi_sw_tcp_recv - TCP receive in sendfile fashion * @rd_desc: read descriptor @@ -77,7 +85,7 @@ static int iscsi_sw_tcp_recv(read_descriptor_t *rd_desc, struct sk_buff *skb, unsigned int consumed, total_consumed = 0; int status; - debug_tcp("in %d bytes\n", skb->len - offset); + ISCSI_SW_TCP_DBG(conn, "in %d bytes\n", skb->len - offset); do { status = 0; @@ -86,7 +94,8 @@ static int iscsi_sw_tcp_recv(read_descriptor_t *rd_desc, struct sk_buff *skb, total_consumed += consumed; } while (consumed != 0 && status != ISCSI_TCP_SKB_DONE); - debug_tcp("read %d bytes status %d\n", skb->len - offset, status); + ISCSI_SW_TCP_DBG(conn, "read %d bytes status %d\n", + skb->len - offset, status); return total_consumed; } @@ -131,7 +140,8 @@ static void iscsi_sw_tcp_state_change(struct sock *sk) if ((sk->sk_state == TCP_CLOSE_WAIT || sk->sk_state == TCP_CLOSE) && !atomic_read(&sk->sk_rmem_alloc)) { - debug_tcp("iscsi_tcp_state_change: TCP_CLOSE|TCP_CLOSE_WAIT\n"); + ISCSI_SW_TCP_DBG(conn, "iscsi_tcp_state_change: " + "TCP_CLOSE|TCP_CLOSE_WAIT\n"); iscsi_conn_failure(conn, ISCSI_ERR_CONN_FAILED); } @@ -155,7 +165,7 @@ static void iscsi_sw_tcp_write_space(struct sock *sk) struct iscsi_sw_tcp_conn *tcp_sw_conn = tcp_conn->dd_data; tcp_sw_conn->old_write_space(sk); - debug_tcp("iscsi_write_space: cid %d\n", conn->id); + ISCSI_SW_TCP_DBG(conn, "iscsi_write_space\n"); scsi_queue_work(conn->session->host, &conn->xmitwork); } @@ -283,7 +293,7 @@ static int iscsi_sw_tcp_xmit(struct iscsi_conn *conn) } } - debug_tcp("xmit %d bytes\n", consumed); + ISCSI_SW_TCP_DBG(conn, "xmit %d bytes\n", consumed); conn->txdata_octets += consumed; return consumed; @@ -291,7 +301,7 @@ static int iscsi_sw_tcp_xmit(struct iscsi_conn *conn) error: /* Transmit error. We could initiate error recovery * here. */ - debug_tcp("Error sending PDU, errno=%d\n", rc); + ISCSI_SW_TCP_DBG(conn, "Error sending PDU, errno=%d\n", rc); iscsi_conn_failure(conn, rc); return -EIO; } @@ -334,9 +344,10 @@ static int iscsi_sw_tcp_send_hdr_done(struct iscsi_tcp_conn *tcp_conn, struct iscsi_sw_tcp_conn *tcp_sw_conn = tcp_conn->dd_data; tcp_sw_conn->out.segment = tcp_sw_conn->out.data_segment; - debug_tcp("Header done. Next segment size %u total_size %u\n", - tcp_sw_conn->out.segment.size, - tcp_sw_conn->out.segment.total_size); + ISCSI_SW_TCP_DBG(tcp_conn->iscsi_conn, + "Header done. Next segment size %u total_size %u\n", + tcp_sw_conn->out.segment.size, + tcp_sw_conn->out.segment.total_size); return 0; } @@ -346,8 +357,8 @@ static void iscsi_sw_tcp_send_hdr_prep(struct iscsi_conn *conn, void *hdr, struct iscsi_tcp_conn *tcp_conn = conn->dd_data; struct iscsi_sw_tcp_conn *tcp_sw_conn = tcp_conn->dd_data; - debug_tcp("%s(%p%s)\n", __func__, tcp_conn, - conn->hdrdgst_en? ", digest enabled" : ""); + ISCSI_SW_TCP_DBG(conn, "%s\n", conn->hdrdgst_en ? + "digest enabled" : "digest disabled"); /* Clear the data segment - needs to be filled in by the * caller using iscsi_tcp_send_data_prep() */ @@ -389,9 +400,9 @@ iscsi_sw_tcp_send_data_prep(struct iscsi_conn *conn, struct scatterlist *sg, struct hash_desc *tx_hash = NULL; unsigned int hdr_spec_len; - debug_tcp("%s(%p, offset=%d, datalen=%d%s)\n", __func__, - tcp_conn, offset, len, - conn->datadgst_en? ", digest enabled" : ""); + ISCSI_SW_TCP_DBG(conn, "offset=%d, datalen=%d %s\n", offset, len, + conn->datadgst_en ? + "digest enabled" : "digest disabled"); /* Make sure the datalen matches what the caller said he would send. */ @@ -415,8 +426,8 @@ iscsi_sw_tcp_send_linear_data_prep(struct iscsi_conn *conn, void *data, struct hash_desc *tx_hash = NULL; unsigned int hdr_spec_len; - debug_tcp("%s(%p, datalen=%d%s)\n", __func__, tcp_conn, len, - conn->datadgst_en? ", digest enabled" : ""); + ISCSI_SW_TCP_DBG(conn, "datalen=%zd %s\n", len, conn->datadgst_en ? + "digest enabled" : "digest disabled"); /* Make sure the datalen matches what the caller said he would send. */ -- cgit v0.10.2 From e28f3d5b51ed07d822f135cd941b01e2d485270e Mon Sep 17 00:00:00 2001 From: Mike Christie Date: Thu, 5 Mar 2009 14:46:01 -0600 Subject: [SCSI] libiscsi: don't cap queue depth in iscsi modules There is no need to cap the queue depth in the modules. We set this in userspace and can do that there. For performance testing with ram based targets, this is helpful since we can have very high queue depths. Signed-off-by: Mike Christie Signed-off-by: James Bottomley diff --git a/drivers/infiniband/ulp/iser/iscsi_iser.c b/drivers/infiniband/ulp/iser/iscsi_iser.c index 4338f54..5f79c0a 100644 --- a/drivers/infiniband/ulp/iser/iscsi_iser.c +++ b/drivers/infiniband/ulp/iser/iscsi_iser.c @@ -404,7 +404,7 @@ iscsi_iser_session_create(struct iscsi_endpoint *ep, struct Scsi_Host *shost; struct iser_conn *ib_conn; - shost = iscsi_host_alloc(&iscsi_iser_sht, 0, ISCSI_MAX_CMD_PER_LUN); + shost = iscsi_host_alloc(&iscsi_iser_sht, 0, ISER_DEF_CMD_PER_LUN); if (!shost) return NULL; shost->transportt = iscsi_iser_scsi_transport; @@ -596,7 +596,7 @@ static struct scsi_host_template iscsi_iser_sht = { .change_queue_depth = iscsi_change_queue_depth, .sg_tablesize = ISCSI_ISER_SG_TABLESIZE, .max_sectors = 1024, - .cmd_per_lun = ISCSI_MAX_CMD_PER_LUN, + .cmd_per_lun = ISER_DEF_CMD_PER_LUN, .eh_abort_handler = iscsi_eh_abort, .eh_device_reset_handler= iscsi_eh_device_reset, .eh_target_reset_handler= iscsi_eh_target_reset, diff --git a/drivers/infiniband/ulp/iser/iscsi_iser.h b/drivers/infiniband/ulp/iser/iscsi_iser.h index 8611195..9d529ca 100644 --- a/drivers/infiniband/ulp/iser/iscsi_iser.h +++ b/drivers/infiniband/ulp/iser/iscsi_iser.h @@ -93,7 +93,7 @@ /* support upto 512KB in one RDMA */ #define ISCSI_ISER_SG_TABLESIZE (0x80000 >> SHIFT_4K) -#define ISCSI_ISER_MAX_LUN 256 +#define ISER_DEF_CMD_PER_LUN 128 /* QP settings */ /* Maximal bounds on received asynchronous PDUs */ diff --git a/drivers/scsi/libiscsi.c b/drivers/scsi/libiscsi.c index 701457c..a5168a6 100644 --- a/drivers/scsi/libiscsi.c +++ b/drivers/scsi/libiscsi.c @@ -1451,8 +1451,6 @@ EXPORT_SYMBOL_GPL(iscsi_queuecommand); int iscsi_change_queue_depth(struct scsi_device *sdev, int depth) { - if (depth > ISCSI_MAX_CMD_PER_LUN) - depth = ISCSI_MAX_CMD_PER_LUN; scsi_adjust_queue_depth(sdev, scsi_get_tag_type(sdev), depth); return sdev->queue_depth; } @@ -2062,13 +2060,8 @@ struct Scsi_Host *iscsi_host_alloc(struct scsi_host_template *sht, if (!shost) return NULL; - if (qdepth > ISCSI_MAX_CMD_PER_LUN || qdepth < 1) { - if (qdepth != 0) - printk(KERN_ERR "iscsi: invalid queue depth of %d. " - "Queue depth must be between 1 and %d.\n", - qdepth, ISCSI_MAX_CMD_PER_LUN); + if (qdepth == 0) qdepth = ISCSI_DEF_CMD_PER_LUN; - } shost->cmd_per_lun = qdepth; ihost = shost_priv(shost); diff --git a/include/scsi/libiscsi.h b/include/scsi/libiscsi.h index 67542aa..898de4a 100644 --- a/include/scsi/libiscsi.h +++ b/include/scsi/libiscsi.h @@ -48,8 +48,7 @@ struct device; #define ISCSI_DEF_XMIT_CMDS_MAX 128 /* must be power of 2 */ #define ISCSI_MGMT_CMDS_MAX 15 -#define ISCSI_DEF_CMD_PER_LUN 32 -#define ISCSI_MAX_CMD_PER_LUN 128 +#define ISCSI_DEF_CMD_PER_LUN 32 /* Task Mgmt states */ enum { -- cgit v0.10.2 From 06d25af4edb60f9e9c7e74d342a6963a32e3392f Mon Sep 17 00:00:00 2001 From: Mike Christie Date: Thu, 5 Mar 2009 14:46:02 -0600 Subject: [SCSI] iscsi class: fix lock dep warning on logout We never should hit the lock up that is spit out when lock dep is on and we logout. But we have been using the shost work queue in a odd way. This patch has us use the work queue for scanning instead of creating our own, and this ends up also killing the lock dep warnings. Signed-off-by: Mike Christie Signed-off-by: James Bottomley diff --git a/drivers/scsi/scsi_transport_iscsi.c b/drivers/scsi/scsi_transport_iscsi.c index 75c9297..4f22f9e 100644 --- a/drivers/scsi/scsi_transport_iscsi.c +++ b/drivers/scsi/scsi_transport_iscsi.c @@ -246,30 +246,13 @@ static int iscsi_setup_host(struct transport_container *tc, struct device *dev, memset(ihost, 0, sizeof(*ihost)); atomic_set(&ihost->nr_scans, 0); mutex_init(&ihost->mutex); - - snprintf(ihost->scan_workq_name, sizeof(ihost->scan_workq_name), - "iscsi_scan_%d", shost->host_no); - ihost->scan_workq = create_singlethread_workqueue( - ihost->scan_workq_name); - if (!ihost->scan_workq) - return -ENOMEM; - return 0; -} - -static int iscsi_remove_host(struct transport_container *tc, struct device *dev, - struct device *cdev) -{ - struct Scsi_Host *shost = dev_to_shost(dev); - struct iscsi_cls_host *ihost = shost->shost_data; - - destroy_workqueue(ihost->scan_workq); return 0; } static DECLARE_TRANSPORT_CLASS(iscsi_host_class, "iscsi_host", iscsi_setup_host, - iscsi_remove_host, + NULL, NULL); static DECLARE_TRANSPORT_CLASS(iscsi_session_class, @@ -568,7 +551,7 @@ static void __iscsi_unblock_session(struct work_struct *work) * scanning from userspace). */ if (shost->hostt->scan_finished) { - if (queue_work(ihost->scan_workq, &session->scan_work)) + if (scsi_queue_work(shost, &session->scan_work)) atomic_inc(&ihost->nr_scans); } } @@ -636,14 +619,6 @@ static void __iscsi_unbind_session(struct work_struct *work) iscsi_session_event(session, ISCSI_KEVENT_UNBIND_SESSION); } -static int iscsi_unbind_session(struct iscsi_cls_session *session) -{ - struct Scsi_Host *shost = iscsi_session_to_shost(session); - struct iscsi_cls_host *ihost = shost->shost_data; - - return queue_work(ihost->scan_workq, &session->unbind_work); -} - struct iscsi_cls_session * iscsi_alloc_session(struct Scsi_Host *shost, struct iscsi_transport *transport, int dd_size) @@ -796,7 +771,6 @@ static int iscsi_iter_destroy_conn_fn(struct device *dev, void *data) void iscsi_remove_session(struct iscsi_cls_session *session) { struct Scsi_Host *shost = iscsi_session_to_shost(session); - struct iscsi_cls_host *ihost = shost->shost_data; unsigned long flags; int err; @@ -821,7 +795,7 @@ void iscsi_remove_session(struct iscsi_cls_session *session) scsi_target_unblock(&session->dev); /* flush running scans then delete devices */ - flush_workqueue(ihost->scan_workq); + scsi_flush_work(shost); __iscsi_unbind_session(&session->unbind_work); /* hw iscsi may not have removed all connections from session */ @@ -1447,7 +1421,8 @@ iscsi_if_recv_msg(struct sk_buff *skb, struct nlmsghdr *nlh) case ISCSI_UEVENT_UNBIND_SESSION: session = iscsi_session_lookup(ev->u.d_session.sid); if (session) - iscsi_unbind_session(session); + scsi_queue_work(iscsi_session_to_shost(session), + &session->unbind_work); else err = -EINVAL; break; @@ -1809,8 +1784,7 @@ iscsi_register_transport(struct iscsi_transport *tt) priv->daemon_pid = -1; priv->iscsi_transport = tt; priv->t.user_scan = iscsi_user_scan; - if (!(tt->caps & CAP_DATA_PATH_OFFLOAD)) - priv->t.create_work_queue = 1; + priv->t.create_work_queue = 1; priv->dev.class = &iscsi_transport_class; dev_set_name(&priv->dev, "%s", tt->name); diff --git a/include/scsi/scsi_transport_iscsi.h b/include/scsi/scsi_transport_iscsi.h index b50aabe..ac29fbd 100644 --- a/include/scsi/scsi_transport_iscsi.h +++ b/include/scsi/scsi_transport_iscsi.h @@ -206,8 +206,6 @@ struct iscsi_cls_session { struct iscsi_cls_host { atomic_t nr_scans; struct mutex mutex; - struct workqueue_struct *scan_workq; - char scan_workq_name[20]; }; extern void iscsi_host_for_each_session(struct Scsi_Host *shost, -- cgit v0.10.2 From 32ae763e3fce4192cd008956a340353a2e5c3192 Mon Sep 17 00:00:00 2001 From: Mike Christie Date: Thu, 5 Mar 2009 14:46:03 -0600 Subject: [SCSI] iscsi lib: have lib create work queue for transmitting IO We were using the shost work queue which ended up being a little akward since all iscsi hosts need a thread for scanning, but only drivers hooked into libiscsi need a workqueue for transmitting. So this patch moves the xmit workqueue to the lib. Signed-off-by: Mike Christie Signed-off-by: James Bottomley diff --git a/drivers/infiniband/ulp/iser/iscsi_iser.c b/drivers/infiniband/ulp/iser/iscsi_iser.c index 5f79c0a..a50cd53 100644 --- a/drivers/infiniband/ulp/iser/iscsi_iser.c +++ b/drivers/infiniband/ulp/iser/iscsi_iser.c @@ -404,7 +404,7 @@ iscsi_iser_session_create(struct iscsi_endpoint *ep, struct Scsi_Host *shost; struct iser_conn *ib_conn; - shost = iscsi_host_alloc(&iscsi_iser_sht, 0, ISER_DEF_CMD_PER_LUN); + shost = iscsi_host_alloc(&iscsi_iser_sht, 0, ISER_DEF_CMD_PER_LUN, 1); if (!shost) return NULL; shost->transportt = iscsi_iser_scsi_transport; diff --git a/drivers/infiniband/ulp/iser/iser_initiator.c b/drivers/infiniband/ulp/iser/iser_initiator.c index e209cb8d..9de6402 100644 --- a/drivers/infiniband/ulp/iser/iser_initiator.c +++ b/drivers/infiniband/ulp/iser/iser_initiator.c @@ -661,7 +661,7 @@ void iser_snd_completion(struct iser_desc *tx_desc) if (resume_tx) { iser_dbg("%ld resuming tx\n",jiffies); - scsi_queue_work(conn->session->host, &conn->xmitwork); + iscsi_conn_queue_work(conn); } if (tx_desc->type == ISCSI_TX_CONTROL) { diff --git a/drivers/scsi/cxgb3i/cxgb3i_iscsi.c b/drivers/scsi/cxgb3i/cxgb3i_iscsi.c index fa2a44f..f6ed9c6 100644 --- a/drivers/scsi/cxgb3i/cxgb3i_iscsi.c +++ b/drivers/scsi/cxgb3i/cxgb3i_iscsi.c @@ -171,7 +171,7 @@ struct cxgb3i_hba *cxgb3i_hba_host_add(struct cxgb3i_adapter *snic, shost = iscsi_host_alloc(&cxgb3i_host_template, sizeof(struct cxgb3i_hba), - CXGB3I_SCSI_QDEPTH_DFLT); + CXGB3I_SCSI_QDEPTH_DFLT, 1); if (!shost) { cxgb3i_log_info("iscsi_host_alloc failed.\n"); return NULL; diff --git a/drivers/scsi/cxgb3i/cxgb3i_pdu.c b/drivers/scsi/cxgb3i/cxgb3i_pdu.c index 17115c2..7eebc9a 100644 --- a/drivers/scsi/cxgb3i/cxgb3i_pdu.c +++ b/drivers/scsi/cxgb3i/cxgb3i_pdu.c @@ -479,7 +479,7 @@ void cxgb3i_conn_tx_open(struct s3_conn *c3cn) cxgb3i_tx_debug("cn 0x%p.\n", c3cn); if (conn) { cxgb3i_tx_debug("cn 0x%p, cid %d.\n", c3cn, conn->id); - scsi_queue_work(conn->session->host, &conn->xmitwork); + iscsi_conn_queue_work(conn); } } diff --git a/drivers/scsi/iscsi_tcp.c b/drivers/scsi/iscsi_tcp.c index 9c2e527..79a706a 100644 --- a/drivers/scsi/iscsi_tcp.c +++ b/drivers/scsi/iscsi_tcp.c @@ -166,7 +166,7 @@ static void iscsi_sw_tcp_write_space(struct sock *sk) tcp_sw_conn->old_write_space(sk); ISCSI_SW_TCP_DBG(conn, "iscsi_write_space\n"); - scsi_queue_work(conn->session->host, &conn->xmitwork); + iscsi_conn_queue_work(conn); } static void iscsi_sw_tcp_conn_set_callbacks(struct iscsi_conn *conn) @@ -777,7 +777,7 @@ iscsi_sw_tcp_session_create(struct iscsi_endpoint *ep, uint16_t cmds_max, return NULL; } - shost = iscsi_host_alloc(&iscsi_sw_tcp_sht, 0, qdepth); + shost = iscsi_host_alloc(&iscsi_sw_tcp_sht, 0, qdepth, 1); if (!shost) return NULL; shost->transportt = iscsi_sw_tcp_scsi_transport; diff --git a/drivers/scsi/libiscsi.c b/drivers/scsi/libiscsi.c index a5168a6..ff89154 100644 --- a/drivers/scsi/libiscsi.c +++ b/drivers/scsi/libiscsi.c @@ -76,6 +76,15 @@ static int iscsi_sna_lte(u32 n1, u32 n2) (n1 > n2 && (n2 - n1 < SNA32_CHECK))); } +inline void iscsi_conn_queue_work(struct iscsi_conn *conn) +{ + struct Scsi_Host *shost = conn->session->host; + struct iscsi_host *ihost = shost_priv(shost); + + queue_work(ihost->workq, &conn->xmitwork); +} +EXPORT_SYMBOL_GPL(iscsi_conn_queue_work); + void iscsi_update_cmdsn(struct iscsi_session *session, struct iscsi_nopin *hdr) { @@ -103,8 +112,7 @@ iscsi_update_cmdsn(struct iscsi_session *session, struct iscsi_nopin *hdr) if (!list_empty(&session->leadconn->xmitqueue) || !list_empty(&session->leadconn->mgmtqueue)) { if (!(session->tt->caps & CAP_DATA_PATH_OFFLOAD)) - scsi_queue_work(session->host, - &session->leadconn->xmitwork); + iscsi_conn_queue_work(session->leadconn); } } } @@ -586,7 +594,7 @@ __iscsi_conn_send_pdu(struct iscsi_conn *conn, struct iscsi_hdr *hdr, goto free_task; } else - scsi_queue_work(conn->session->host, &conn->xmitwork); + iscsi_conn_queue_work(conn); return task; @@ -1160,7 +1168,7 @@ void iscsi_requeue_task(struct iscsi_task *task) struct iscsi_conn *conn = task->conn; list_move_tail(&task->running, &conn->requeue); - scsi_queue_work(conn->session->host, &conn->xmitwork); + iscsi_conn_queue_work(conn); } EXPORT_SYMBOL_GPL(iscsi_requeue_task); @@ -1413,7 +1421,7 @@ int iscsi_queuecommand(struct scsi_cmnd *sc, void (*done)(struct scsi_cmnd *)) goto prepd_reject; } } else - scsi_queue_work(session->host, &conn->xmitwork); + iscsi_conn_queue_work(conn); session->queued_cmdsn++; spin_unlock(&session->lock); @@ -1631,9 +1639,12 @@ static void fail_all_commands(struct iscsi_conn *conn, unsigned lun, void iscsi_suspend_tx(struct iscsi_conn *conn) { + struct Scsi_Host *shost = conn->session->host; + struct iscsi_host *ihost = shost_priv(shost); + set_bit(ISCSI_SUSPEND_BIT, &conn->suspend_tx); if (!(conn->session->tt->caps & CAP_DATA_PATH_OFFLOAD)) - scsi_flush_work(conn->session->host); + flush_workqueue(ihost->workq); } EXPORT_SYMBOL_GPL(iscsi_suspend_tx); @@ -1641,7 +1652,7 @@ static void iscsi_start_tx(struct iscsi_conn *conn) { clear_bit(ISCSI_SUSPEND_BIT, &conn->suspend_tx); if (!(conn->session->tt->caps & CAP_DATA_PATH_OFFLOAD)) - scsi_queue_work(conn->session->host, &conn->xmitwork); + iscsi_conn_queue_work(conn); } static enum blk_eh_timer_return iscsi_eh_cmd_timed_out(struct scsi_cmnd *scmd) @@ -2046,12 +2057,14 @@ EXPORT_SYMBOL_GPL(iscsi_host_add); * @sht: scsi host template * @dd_data_size: driver host data size * @qdepth: default device queue depth + * @xmit_can_sleep: bool indicating if LLD will queue IO from a work queue * * This should be called by partial offload and software iscsi drivers. * To access the driver specific memory use the iscsi_host_priv() macro. */ struct Scsi_Host *iscsi_host_alloc(struct scsi_host_template *sht, - int dd_data_size, uint16_t qdepth) + int dd_data_size, uint16_t qdepth, + bool xmit_can_sleep) { struct Scsi_Host *shost; struct iscsi_host *ihost; @@ -2063,13 +2076,25 @@ struct Scsi_Host *iscsi_host_alloc(struct scsi_host_template *sht, if (qdepth == 0) qdepth = ISCSI_DEF_CMD_PER_LUN; shost->cmd_per_lun = qdepth; - ihost = shost_priv(shost); + + if (xmit_can_sleep) { + snprintf(ihost->workq_name, sizeof(ihost->workq_name), + "iscsi_q_%d", shost->host_no); + ihost->workq = create_singlethread_workqueue(ihost->workq_name); + if (!ihost->workq) + goto free_host; + } + spin_lock_init(&ihost->lock); ihost->state = ISCSI_HOST_SETUP; ihost->num_sessions = 0; init_waitqueue_head(&ihost->session_removal_wq); return shost; + +free_host: + scsi_host_put(shost); + return NULL; } EXPORT_SYMBOL_GPL(iscsi_host_alloc); @@ -2101,6 +2126,8 @@ void iscsi_host_remove(struct Scsi_Host *shost) flush_signals(current); scsi_remove_host(shost); + if (ihost->workq) + destroy_workqueue(ihost->workq); } EXPORT_SYMBOL_GPL(iscsi_host_remove); diff --git a/include/scsi/libiscsi.h b/include/scsi/libiscsi.h index 898de4a..b0b8a69 100644 --- a/include/scsi/libiscsi.h +++ b/include/scsi/libiscsi.h @@ -318,6 +318,9 @@ struct iscsi_host { spinlock_t lock; int num_sessions; int state; + + struct workqueue_struct *workq; + char workq_name[20]; }; /* @@ -343,7 +346,8 @@ extern int iscsi_host_get_param(struct Scsi_Host *shost, enum iscsi_host_param param, char *buf); extern int iscsi_host_add(struct Scsi_Host *shost, struct device *pdev); extern struct Scsi_Host *iscsi_host_alloc(struct scsi_host_template *sht, - int dd_data_size, uint16_t qdepth); + int dd_data_size, uint16_t qdepth, + bool xmit_can_sleep); extern void iscsi_host_remove(struct Scsi_Host *shost); extern void iscsi_host_free(struct Scsi_Host *shost); @@ -379,6 +383,7 @@ extern void iscsi_session_failure(struct iscsi_cls_session *cls_session, extern int iscsi_conn_get_param(struct iscsi_cls_conn *cls_conn, enum iscsi_param param, char *buf); extern void iscsi_suspend_tx(struct iscsi_conn *conn); +extern void iscsi_conn_queue_work(struct iscsi_conn *conn); #define iscsi_conn_printk(prefix, _c, fmt, a...) \ iscsi_cls_conn_printk(prefix, ((struct iscsi_conn *)_c)->cls_conn, \ -- cgit v0.10.2 From 4d1083509a69a36cc1394f188b7b8956e5526a16 Mon Sep 17 00:00:00 2001 From: Mike Christie Date: Thu, 5 Mar 2009 14:46:04 -0600 Subject: [SCSI] iscsi lib: remove qdepth param from iscsi host allocation The qdepth setting was useful when we needed libiscsi to verify the setting. Now we just need to make sure if older tools passed in zero then we need to set some default. So this patch just has us use the sht->cmd_per_lun or if for LLD does a host per session then we can set it on per host basis. Signed-off-by: Mike Christie Signed-off-by: James Bottomley diff --git a/drivers/infiniband/ulp/iser/iscsi_iser.c b/drivers/infiniband/ulp/iser/iscsi_iser.c index a50cd53..6c61ed1 100644 --- a/drivers/infiniband/ulp/iser/iscsi_iser.c +++ b/drivers/infiniband/ulp/iser/iscsi_iser.c @@ -404,7 +404,7 @@ iscsi_iser_session_create(struct iscsi_endpoint *ep, struct Scsi_Host *shost; struct iser_conn *ib_conn; - shost = iscsi_host_alloc(&iscsi_iser_sht, 0, ISER_DEF_CMD_PER_LUN, 1); + shost = iscsi_host_alloc(&iscsi_iser_sht, 0, 1); if (!shost) return NULL; shost->transportt = iscsi_iser_scsi_transport; diff --git a/drivers/scsi/cxgb3i/cxgb3i_iscsi.c b/drivers/scsi/cxgb3i/cxgb3i_iscsi.c index f6ed9c6..307f55e 100644 --- a/drivers/scsi/cxgb3i/cxgb3i_iscsi.c +++ b/drivers/scsi/cxgb3i/cxgb3i_iscsi.c @@ -170,8 +170,7 @@ struct cxgb3i_hba *cxgb3i_hba_host_add(struct cxgb3i_adapter *snic, int err; shost = iscsi_host_alloc(&cxgb3i_host_template, - sizeof(struct cxgb3i_hba), - CXGB3I_SCSI_QDEPTH_DFLT, 1); + sizeof(struct cxgb3i_hba), 1); if (!shost) { cxgb3i_log_info("iscsi_host_alloc failed.\n"); return NULL; @@ -843,7 +842,7 @@ static struct scsi_host_template cxgb3i_host_template = { .can_queue = CXGB3I_SCSI_QDEPTH_DFLT - 1, .sg_tablesize = SG_ALL, .max_sectors = 0xFFFF, - .cmd_per_lun = ISCSI_DEF_CMD_PER_LUN, + .cmd_per_lun = CXGB3I_SCSI_QDEPTH_DFLT, .eh_abort_handler = iscsi_eh_abort, .eh_device_reset_handler = iscsi_eh_device_reset, .eh_target_reset_handler = iscsi_eh_target_reset, diff --git a/drivers/scsi/iscsi_tcp.c b/drivers/scsi/iscsi_tcp.c index 79a706a..ad8676c 100644 --- a/drivers/scsi/iscsi_tcp.c +++ b/drivers/scsi/iscsi_tcp.c @@ -777,10 +777,11 @@ iscsi_sw_tcp_session_create(struct iscsi_endpoint *ep, uint16_t cmds_max, return NULL; } - shost = iscsi_host_alloc(&iscsi_sw_tcp_sht, 0, qdepth, 1); + shost = iscsi_host_alloc(&iscsi_sw_tcp_sht, 0, 1); if (!shost) return NULL; shost->transportt = iscsi_sw_tcp_scsi_transport; + shost->cmd_per_lun = qdepth; shost->max_lun = iscsi_max_lun; shost->max_id = 0; shost->max_channel = 0; diff --git a/drivers/scsi/libiscsi.c b/drivers/scsi/libiscsi.c index ff89154..d12f979 100644 --- a/drivers/scsi/libiscsi.c +++ b/drivers/scsi/libiscsi.c @@ -2046,6 +2046,9 @@ int iscsi_host_add(struct Scsi_Host *shost, struct device *pdev) if (!shost->can_queue) shost->can_queue = ISCSI_DEF_XMIT_CMDS_MAX; + if (!shost->cmd_per_lun) + shost->cmd_per_lun = ISCSI_DEF_CMD_PER_LUN; + if (!shost->transportt->eh_timed_out) shost->transportt->eh_timed_out = iscsi_eh_cmd_timed_out; return scsi_add_host(shost, pdev); @@ -2056,15 +2059,13 @@ EXPORT_SYMBOL_GPL(iscsi_host_add); * iscsi_host_alloc - allocate a host and driver data * @sht: scsi host template * @dd_data_size: driver host data size - * @qdepth: default device queue depth * @xmit_can_sleep: bool indicating if LLD will queue IO from a work queue * * This should be called by partial offload and software iscsi drivers. * To access the driver specific memory use the iscsi_host_priv() macro. */ struct Scsi_Host *iscsi_host_alloc(struct scsi_host_template *sht, - int dd_data_size, uint16_t qdepth, - bool xmit_can_sleep) + int dd_data_size, bool xmit_can_sleep) { struct Scsi_Host *shost; struct iscsi_host *ihost; @@ -2072,10 +2073,6 @@ struct Scsi_Host *iscsi_host_alloc(struct scsi_host_template *sht, shost = scsi_host_alloc(sht, sizeof(struct iscsi_host) + dd_data_size); if (!shost) return NULL; - - if (qdepth == 0) - qdepth = ISCSI_DEF_CMD_PER_LUN; - shost->cmd_per_lun = qdepth; ihost = shost_priv(shost); if (xmit_can_sleep) { diff --git a/include/scsi/libiscsi.h b/include/scsi/libiscsi.h index b0b8a69..84eded9 100644 --- a/include/scsi/libiscsi.h +++ b/include/scsi/libiscsi.h @@ -346,7 +346,7 @@ extern int iscsi_host_get_param(struct Scsi_Host *shost, enum iscsi_host_param param, char *buf); extern int iscsi_host_add(struct Scsi_Host *shost, struct device *pdev); extern struct Scsi_Host *iscsi_host_alloc(struct scsi_host_template *sht, - int dd_data_size, uint16_t qdepth, + int dd_data_size, bool xmit_can_sleep); extern void iscsi_host_remove(struct Scsi_Host *shost); extern void iscsi_host_free(struct Scsi_Host *shost); -- cgit v0.10.2 From 40a06e755d8524cd0b24f795e8bdce5ad19fc41b Mon Sep 17 00:00:00 2001 From: Mike Christie Date: Thu, 5 Mar 2009 14:46:05 -0600 Subject: [SCSI] libiscsi: pass session failure a session struct The api for conn and session failures is akward because one takes a conn from the lib and one takes a session from the class. This syncs up the interfaces to use structs from the lib. Signed-off-by: Mike Christie Signed-off-by: James Bottomley diff --git a/drivers/scsi/libiscsi.c b/drivers/scsi/libiscsi.c index d12f979..d070179 100644 --- a/drivers/scsi/libiscsi.c +++ b/drivers/scsi/libiscsi.c @@ -1069,10 +1069,9 @@ struct iscsi_task *iscsi_itt_to_ctask(struct iscsi_conn *conn, itt_t itt) } EXPORT_SYMBOL_GPL(iscsi_itt_to_ctask); -void iscsi_session_failure(struct iscsi_cls_session *cls_session, +void iscsi_session_failure(struct iscsi_session *session, enum iscsi_err err) { - struct iscsi_session *session = cls_session->dd_data; struct iscsi_conn *conn; struct device *dev; unsigned long flags; @@ -2097,7 +2096,7 @@ EXPORT_SYMBOL_GPL(iscsi_host_alloc); static void iscsi_notify_host_removed(struct iscsi_cls_session *cls_session) { - iscsi_session_failure(cls_session, ISCSI_ERR_INVALID_HOST); + iscsi_session_failure(cls_session->dd_data, ISCSI_ERR_INVALID_HOST); } /** diff --git a/include/scsi/libiscsi.h b/include/scsi/libiscsi.h index 84eded9..7ffaed2 100644 --- a/include/scsi/libiscsi.h +++ b/include/scsi/libiscsi.h @@ -378,7 +378,7 @@ extern void iscsi_conn_stop(struct iscsi_cls_conn *, int); extern int iscsi_conn_bind(struct iscsi_cls_session *, struct iscsi_cls_conn *, int); extern void iscsi_conn_failure(struct iscsi_conn *conn, enum iscsi_err err); -extern void iscsi_session_failure(struct iscsi_cls_session *cls_session, +extern void iscsi_session_failure(struct iscsi_session *session, enum iscsi_err err); extern int iscsi_conn_get_param(struct iscsi_cls_conn *cls_conn, enum iscsi_param param, char *buf); -- cgit v0.10.2 From 5e7facb77ff4b6961d936773fb1f175f7abf76b7 Mon Sep 17 00:00:00 2001 From: Mike Christie Date: Thu, 5 Mar 2009 14:46:06 -0600 Subject: [SCSI] iscsi class: remove host no argument from session creation callout We do not need to have llds set the host no for the session's parent, because we know the session's parent is going to be the host. This removes it from the session creation callback and converts the drivers. Signed-off-by: Mike Christie Signed-off-by: James Bottomley diff --git a/drivers/infiniband/ulp/iser/iscsi_iser.c b/drivers/infiniband/ulp/iser/iscsi_iser.c index 6c61ed1..13d7674 100644 --- a/drivers/infiniband/ulp/iser/iscsi_iser.c +++ b/drivers/infiniband/ulp/iser/iscsi_iser.c @@ -397,7 +397,7 @@ static void iscsi_iser_session_destroy(struct iscsi_cls_session *cls_session) static struct iscsi_cls_session * iscsi_iser_session_create(struct iscsi_endpoint *ep, uint16_t cmds_max, uint16_t qdepth, - uint32_t initial_cmdsn, uint32_t *hostno) + uint32_t initial_cmdsn) { struct iscsi_cls_session *cls_session; struct iscsi_session *session; @@ -423,7 +423,6 @@ iscsi_iser_session_create(struct iscsi_endpoint *ep, if (iscsi_host_add(shost, ep ? ib_conn->device->ib_device->dma_device : NULL)) goto free_host; - *hostno = shost->host_no; /* * we do not support setting can_queue cmd_per_lun from userspace yet diff --git a/drivers/scsi/cxgb3i/cxgb3i_iscsi.c b/drivers/scsi/cxgb3i/cxgb3i_iscsi.c index 307f55e..ae4a930 100644 --- a/drivers/scsi/cxgb3i/cxgb3i_iscsi.c +++ b/drivers/scsi/cxgb3i/cxgb3i_iscsi.c @@ -334,13 +334,12 @@ static void cxgb3i_ep_disconnect(struct iscsi_endpoint *ep) * @cmds_max: max # of commands * @qdepth: scsi queue depth * @initial_cmdsn: initial iscsi CMDSN for this session - * @host_no: pointer to return host no * * Creates a new iSCSI session */ static struct iscsi_cls_session * cxgb3i_session_create(struct iscsi_endpoint *ep, u16 cmds_max, u16 qdepth, - u32 initial_cmdsn, u32 *host_no) + u32 initial_cmdsn) { struct cxgb3i_endpoint *cep; struct cxgb3i_hba *hba; @@ -359,8 +358,6 @@ cxgb3i_session_create(struct iscsi_endpoint *ep, u16 cmds_max, u16 qdepth, cxgb3i_api_debug("ep 0x%p, cep 0x%p, hba 0x%p.\n", ep, cep, hba); BUG_ON(hba != iscsi_host_priv(shost)); - *host_no = shost->host_no; - cls_session = iscsi_session_setup(&cxgb3i_iscsi_transport, shost, cmds_max, sizeof(struct iscsi_tcp_task) + diff --git a/drivers/scsi/iscsi_tcp.c b/drivers/scsi/iscsi_tcp.c index ad8676c..b3e5e08 100644 --- a/drivers/scsi/iscsi_tcp.c +++ b/drivers/scsi/iscsi_tcp.c @@ -765,8 +765,7 @@ iscsi_sw_tcp_conn_get_stats(struct iscsi_cls_conn *cls_conn, static struct iscsi_cls_session * iscsi_sw_tcp_session_create(struct iscsi_endpoint *ep, uint16_t cmds_max, - uint16_t qdepth, uint32_t initial_cmdsn, - uint32_t *hostno) + uint16_t qdepth, uint32_t initial_cmdsn) { struct iscsi_cls_session *cls_session; struct iscsi_session *session; @@ -789,7 +788,6 @@ iscsi_sw_tcp_session_create(struct iscsi_endpoint *ep, uint16_t cmds_max, if (iscsi_host_add(shost, NULL)) goto free_host; - *hostno = shost->host_no; cls_session = iscsi_session_setup(&iscsi_sw_tcp_transport, shost, cmds_max, diff --git a/drivers/scsi/scsi_transport_iscsi.c b/drivers/scsi/scsi_transport_iscsi.c index 4f22f9e..2340e2c 100644 --- a/drivers/scsi/scsi_transport_iscsi.c +++ b/drivers/scsi/scsi_transport_iscsi.c @@ -1197,14 +1197,15 @@ iscsi_if_create_session(struct iscsi_internal *priv, struct iscsi_endpoint *ep, { struct iscsi_transport *transport = priv->iscsi_transport; struct iscsi_cls_session *session; - uint32_t host_no; + struct Scsi_Host *shost; session = transport->create_session(ep, cmds_max, queue_depth, - initial_cmdsn, &host_no); + initial_cmdsn); if (!session) return -ENOMEM; - ev->r.c_session_ret.host_no = host_no; + shost = iscsi_session_to_shost(session); + ev->r.c_session_ret.host_no = shost->host_no; ev->r.c_session_ret.sid = session->sid; return 0; } diff --git a/include/scsi/scsi_transport_iscsi.h b/include/scsi/scsi_transport_iscsi.h index ac29fbd..457588e 100644 --- a/include/scsi/scsi_transport_iscsi.h +++ b/include/scsi/scsi_transport_iscsi.h @@ -88,7 +88,7 @@ struct iscsi_transport { uint64_t host_param_mask; struct iscsi_cls_session *(*create_session) (struct iscsi_endpoint *ep, uint16_t cmds_max, uint16_t qdepth, - uint32_t sn, uint32_t *hn); + uint32_t sn); void (*destroy_session) (struct iscsi_cls_session *session); struct iscsi_cls_conn *(*create_conn) (struct iscsi_cls_session *sess, uint32_t cid); -- cgit v0.10.2 From 728996829b3e2a3bbacb7390e6c040dd839cdf21 Mon Sep 17 00:00:00 2001 From: Mike Christie Date: Thu, 5 Mar 2009 14:46:07 -0600 Subject: [SCSI] libiscsi: fix possbile null ptr session command cleanup If the iscsi eh fires when the current task is a nop, then the task->sc pointer is null. fail_all_commands could then try to do task->sc->device and oops. We actually do not need to access the curr task in this path, because if it is a cmd task the fail_command call will handle this and if it is mgmt task then the flush of the mgmt queues will handle that. Signed-off-by: Mike Christie Signed-off-by: James Bottomley diff --git a/drivers/scsi/libiscsi.c b/drivers/scsi/libiscsi.c index d070179..dfaa8ad 100644 --- a/drivers/scsi/libiscsi.c +++ b/drivers/scsi/libiscsi.c @@ -1603,8 +1603,11 @@ static void fail_all_commands(struct iscsi_conn *conn, unsigned lun, { struct iscsi_task *task, *tmp; - if (conn->task && (conn->task->sc->device->lun == lun || lun == -1)) - conn->task = NULL; + if (conn->task) { + if (lun == -1 || + (conn->task->sc && conn->task->sc->device->lun == lun)) + conn->task = NULL; + } /* flush pending */ list_for_each_entry_safe(task, tmp, &conn->xmitqueue, running) { -- cgit v0.10.2 From 154229a33e5698cd89910c9762201bc7edd446b4 Mon Sep 17 00:00:00 2001 From: Karen Xie Date: Thu, 5 Mar 2009 14:46:08 -0600 Subject: [SCSI] cxgb3i: fix function descriptions Limit function descriptions to be one line. Signed-off-by: Karen Xie Signed-off-by: Mike Christie Signed-off-by: James Bottomley diff --git a/drivers/scsi/cxgb3i/cxgb3i_ddp.c b/drivers/scsi/cxgb3i/cxgb3i_ddp.c index a83d36e..4eb6f55 100644 --- a/drivers/scsi/cxgb3i/cxgb3i_ddp.c +++ b/drivers/scsi/cxgb3i/cxgb3i_ddp.c @@ -196,7 +196,7 @@ static inline int ddp_alloc_gl_skb(struct cxgb3i_ddp_info *ddp, int idx, } /** - * cxgb3i_ddp_find_page_index - return ddp page index for a given page size. + * cxgb3i_ddp_find_page_index - return ddp page index for a given page size * @pgsz: page size * return the ddp page index, if no match is found return DDP_PGIDX_MAX. */ @@ -355,8 +355,7 @@ EXPORT_SYMBOL_GPL(cxgb3i_ddp_release_gl); * @tdev: t3cdev adapter * @tid: connection id * @tformat: tag format - * @tagp: the s/w tag, if ddp setup is successful, it will be updated with - * ddp/hw tag + * @tagp: contains s/w tag initially, will be updated with ddp/hw tag * @gl: the page momory list * @gfp: allocation mode * diff --git a/drivers/scsi/cxgb3i/cxgb3i_ddp.h b/drivers/scsi/cxgb3i/cxgb3i_ddp.h index 3faae78..75a63a8 100644 --- a/drivers/scsi/cxgb3i/cxgb3i_ddp.h +++ b/drivers/scsi/cxgb3i/cxgb3i_ddp.h @@ -185,12 +185,11 @@ static inline int cxgb3i_is_ddp_tag(struct cxgb3i_tag_format *tformat, u32 tag) } /** - * cxgb3i_sw_tag_usable - check if a given s/w tag has enough bits left for - * the reserved/hw bits + * cxgb3i_sw_tag_usable - check if s/w tag has enough bits left for hw bits * @tformat: tag format information * @sw_tag: s/w tag to be checked * - * return true if the tag is a ddp tag, false otherwise. + * return true if the tag can be used for hw ddp tag, false otherwise. */ static inline int cxgb3i_sw_tag_usable(struct cxgb3i_tag_format *tformat, u32 sw_tag) @@ -222,8 +221,7 @@ static inline u32 cxgb3i_set_non_ddp_tag(struct cxgb3i_tag_format *tformat, } /** - * cxgb3i_ddp_tag_base - shift the s/w tag bits so that reserved bits are not - * used. + * cxgb3i_ddp_tag_base - shift s/w tag bits so that reserved bits are not used * @tformat: tag format information * @sw_tag: s/w tag to be checked */ diff --git a/drivers/scsi/cxgb3i/cxgb3i_iscsi.c b/drivers/scsi/cxgb3i/cxgb3i_iscsi.c index ae4a930..e185ded 100644 --- a/drivers/scsi/cxgb3i/cxgb3i_iscsi.c +++ b/drivers/scsi/cxgb3i/cxgb3i_iscsi.c @@ -101,8 +101,7 @@ free_snic: } /** - * cxgb3i_adapter_remove - release all the resources held and cleanup any - * h/w settings + * cxgb3i_adapter_remove - release the resources held and cleanup h/w settings * @t3dev: t3cdev adapter */ void cxgb3i_adapter_remove(struct t3cdev *t3dev) @@ -135,8 +134,7 @@ void cxgb3i_adapter_remove(struct t3cdev *t3dev) } /** - * cxgb3i_hba_find_by_netdev - find the cxgb3i_hba structure with a given - * net_device + * cxgb3i_hba_find_by_netdev - find the cxgb3i_hba structure via net_device * @t3dev: t3cdev adapter */ struct cxgb3i_hba *cxgb3i_hba_find_by_netdev(struct net_device *ndev) @@ -390,9 +388,9 @@ static void cxgb3i_session_destroy(struct iscsi_cls_session *cls_session) } /** - * cxgb3i_conn_max_xmit_dlength -- check the max. xmit pdu segment size, - * reduce it to be within the hardware limit if needed + * cxgb3i_conn_max_xmit_dlength -- calc the max. xmit pdu segment size * @conn: iscsi connection + * check the max. xmit pdu payload, reduce it if needed */ static inline int cxgb3i_conn_max_xmit_dlength(struct iscsi_conn *conn) @@ -413,8 +411,7 @@ static inline int cxgb3i_conn_max_xmit_dlength(struct iscsi_conn *conn) } /** - * cxgb3i_conn_max_recv_dlength -- check the max. recv pdu segment size against - * the hardware limit + * cxgb3i_conn_max_recv_dlength -- check the max. recv pdu segment size * @conn: iscsi connection * return 0 if the value is valid, < 0 otherwise. */ @@ -755,9 +752,9 @@ static void cxgb3i_parse_itt(struct iscsi_conn *conn, itt_t itt, /** * cxgb3i_reserve_itt - generate tag for a give task - * Try to set up ddp for a scsi read task. * @task: iscsi task * @hdr_itt: tag, filled in by this function + * Set up ddp for scsi read tasks if possible. */ int cxgb3i_reserve_itt(struct iscsi_task *task, itt_t *hdr_itt) { @@ -805,9 +802,9 @@ int cxgb3i_reserve_itt(struct iscsi_task *task, itt_t *hdr_itt) /** * cxgb3i_release_itt - release the tag for a given task - * if the tag is a ddp tag, release the ddp setup * @task: iscsi task * @hdr_itt: tag + * If the tag is a ddp tag, release the ddp setup */ void cxgb3i_release_itt(struct iscsi_task *task, itt_t hdr_itt) { diff --git a/drivers/scsi/cxgb3i/cxgb3i_offload.c b/drivers/scsi/cxgb3i/cxgb3i_offload.c index de3b3b6..c2e434e 100644 --- a/drivers/scsi/cxgb3i/cxgb3i_offload.c +++ b/drivers/scsi/cxgb3i/cxgb3i_offload.c @@ -1417,8 +1417,7 @@ static void c3cn_active_close(struct s3_conn *c3cn) } /** - * cxgb3i_c3cn_release - close and release an iscsi tcp connection and any - * resource held + * cxgb3i_c3cn_release - close and release an iscsi tcp connection * @c3cn: the iscsi tcp connection */ void cxgb3i_c3cn_release(struct s3_conn *c3cn) diff --git a/drivers/scsi/cxgb3i/cxgb3i_offload.h b/drivers/scsi/cxgb3i/cxgb3i_offload.h index 6344b9e..275f23f 100644 --- a/drivers/scsi/cxgb3i/cxgb3i_offload.h +++ b/drivers/scsi/cxgb3i/cxgb3i_offload.h @@ -139,6 +139,7 @@ enum c3cn_flags { /** * cxgb3i_sdev_data - Per adapter data. + * * Linked off of each Ethernet device port on the adapter. * Also available via the t3cdev structure since we have pointers to our port * net_device's there ... -- cgit v0.10.2 From 4ab3b73f85ca2e99d9dbdb55ac13e57327a7e915 Mon Sep 17 00:00:00 2001 From: Douglas Gilbert Date: Mon, 9 Mar 2009 10:51:38 -0400 Subject: [SCSI] bsg: add linux/types.h include to bsg.h Since bsg.h has recently been added to the list of kernel headers that should be exported to the user space, this attachment makes bsg.h more user space "friendly". Specifically autotools dislike headers that don't compile freestanding and bsg.h's use of __u32 types (and friends) are not standard C (C90 or C99). The inclusion of linux/types.h fixes that. Signed-off-by: Douglas Gilbert Signed-off-by: James Bottomley diff --git a/include/linux/bsg.h b/include/linux/bsg.h index cf0303a6..6c0a00d 100644 --- a/include/linux/bsg.h +++ b/include/linux/bsg.h @@ -1,6 +1,8 @@ #ifndef BSG_H #define BSG_H +#include + #define BSG_PROTOCOL_SCSI 0 #define BSG_SUB_PROTOCOL_SCSI_CMD 0 -- cgit v0.10.2 From 7a252fe7bcf64f1174b55c5c696ef2506b849f80 Mon Sep 17 00:00:00 2001 From: adam radford Date: Mon, 9 Mar 2009 12:15:01 -0800 Subject: [SCSI] 3w-9xxx: add power management support Signed-off-by: Adam Radford Signed-off-by: James Bottomley diff --git a/drivers/scsi/3w-9xxx.c b/drivers/scsi/3w-9xxx.c index 5311317..a12783e 100644 --- a/drivers/scsi/3w-9xxx.c +++ b/drivers/scsi/3w-9xxx.c @@ -4,7 +4,7 @@ Written By: Adam Radford Modifications By: Tom Couch - Copyright (C) 2004-2008 Applied Micro Circuits Corporation. + Copyright (C) 2004-2009 Applied Micro Circuits Corporation. This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by @@ -75,6 +75,7 @@ Add MSI support and "use_msi" module parameter. Fix bug in twa_get_param() on 4GB+. Use pci_resource_len() for ioremap(). + 2.26.02.012 - Add power management support. */ #include @@ -99,7 +100,7 @@ #include "3w-9xxx.h" /* Globals */ -#define TW_DRIVER_VERSION "2.26.02.011" +#define TW_DRIVER_VERSION "2.26.02.012" static TW_Device_Extension *twa_device_extension_list[TW_MAX_SLOT]; static unsigned int twa_device_extension_count; static int twa_major = -1; @@ -2182,6 +2183,98 @@ static void twa_remove(struct pci_dev *pdev) twa_device_extension_count--; } /* End twa_remove() */ +#ifdef CONFIG_PM +/* This function is called on PCI suspend */ +static int twa_suspend(struct pci_dev *pdev, pm_message_t state) +{ + struct Scsi_Host *host = pci_get_drvdata(pdev); + TW_Device_Extension *tw_dev = (TW_Device_Extension *)host->hostdata; + + printk(KERN_WARNING "3w-9xxx: Suspending host %d.\n", tw_dev->host->host_no); + + TW_DISABLE_INTERRUPTS(tw_dev); + free_irq(tw_dev->tw_pci_dev->irq, tw_dev); + + if (test_bit(TW_USING_MSI, &tw_dev->flags)) + pci_disable_msi(pdev); + + /* Tell the card we are shutting down */ + if (twa_initconnection(tw_dev, 1, 0, 0, 0, 0, 0, NULL, NULL, NULL, NULL, NULL)) { + TW_PRINTK(tw_dev->host, TW_DRIVER, 0x38, "Connection shutdown failed during suspend"); + } else { + printk(KERN_WARNING "3w-9xxx: Suspend complete.\n"); + } + TW_CLEAR_ALL_INTERRUPTS(tw_dev); + + pci_save_state(pdev); + pci_disable_device(pdev); + pci_set_power_state(pdev, pci_choose_state(pdev, state)); + + return 0; +} /* End twa_suspend() */ + +/* This function is called on PCI resume */ +static int twa_resume(struct pci_dev *pdev) +{ + int retval = 0; + struct Scsi_Host *host = pci_get_drvdata(pdev); + TW_Device_Extension *tw_dev = (TW_Device_Extension *)host->hostdata; + + printk(KERN_WARNING "3w-9xxx: Resuming host %d.\n", tw_dev->host->host_no); + pci_set_power_state(pdev, PCI_D0); + pci_enable_wake(pdev, PCI_D0, 0); + pci_restore_state(pdev); + + retval = pci_enable_device(pdev); + if (retval) { + TW_PRINTK(tw_dev->host, TW_DRIVER, 0x39, "Enable device failed during resume"); + return retval; + } + + pci_set_master(pdev); + pci_try_set_mwi(pdev); + + if (pci_set_dma_mask(pdev, DMA_64BIT_MASK) + || pci_set_consistent_dma_mask(pdev, DMA_64BIT_MASK)) + if (pci_set_dma_mask(pdev, DMA_32BIT_MASK) + || pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK)) { + TW_PRINTK(host, TW_DRIVER, 0x40, "Failed to set dma mask during resume"); + retval = -ENODEV; + goto out_disable_device; + } + + /* Initialize the card */ + if (twa_reset_sequence(tw_dev, 0)) { + retval = -ENODEV; + goto out_disable_device; + } + + /* Now setup the interrupt handler */ + retval = request_irq(pdev->irq, twa_interrupt, IRQF_SHARED, "3w-9xxx", tw_dev); + if (retval) { + TW_PRINTK(tw_dev->host, TW_DRIVER, 0x42, "Error requesting IRQ during resume"); + retval = -ENODEV; + goto out_disable_device; + } + + /* Now enable MSI if enabled */ + if (test_bit(TW_USING_MSI, &tw_dev->flags)) + pci_enable_msi(pdev); + + /* Re-enable interrupts on the card */ + TW_ENABLE_AND_CLEAR_INTERRUPTS(tw_dev); + + printk(KERN_WARNING "3w-9xxx: Resume complete.\n"); + return 0; + +out_disable_device: + scsi_remove_host(host); + pci_disable_device(pdev); + + return retval; +} /* End twa_resume() */ +#endif + /* PCI Devices supported by this driver */ static struct pci_device_id twa_pci_tbl[] __devinitdata = { { PCI_VENDOR_ID_3WARE, PCI_DEVICE_ID_3WARE_9000, @@ -2202,6 +2295,10 @@ static struct pci_driver twa_driver = { .id_table = twa_pci_tbl, .probe = twa_probe, .remove = twa_remove, +#ifdef CONFIG_PM + .suspend = twa_suspend, + .resume = twa_resume, +#endif .shutdown = twa_shutdown }; diff --git a/drivers/scsi/3w-9xxx.h b/drivers/scsi/3w-9xxx.h index 1729a87..2893eec 100644 --- a/drivers/scsi/3w-9xxx.h +++ b/drivers/scsi/3w-9xxx.h @@ -4,7 +4,7 @@ Written By: Adam Radford Modifications By: Tom Couch - Copyright (C) 2004-2008 Applied Micro Circuits Corporation. + Copyright (C) 2004-2009 Applied Micro Circuits Corporation. This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by -- cgit v0.10.2 From 95f6c83f6c57be92c67247802d0f699137957457 Mon Sep 17 00:00:00 2001 From: Scott James Remnant Date: Tue, 10 Mar 2009 16:19:44 +0000 Subject: [SCSI] ch: Add scsi type modalias The ch module is missing the scsi:t-0x08* alias that would cause it to be auto-loaded when a device of that type if found by udev, requiring udev to have a specific rule just for this one module. This patch adds the alias. Signed-off-by: Scott James Remnant Signed-off-by: James Bottomley diff --git a/drivers/scsi/ch.c b/drivers/scsi/ch.c index af97254..7b1633a 100644 --- a/drivers/scsi/ch.c +++ b/drivers/scsi/ch.c @@ -41,6 +41,7 @@ MODULE_DESCRIPTION("device driver for scsi media changer devices"); MODULE_AUTHOR("Gerd Knorr "); MODULE_LICENSE("GPL"); MODULE_ALIAS_CHARDEV_MAJOR(SCSI_CHANGER_MAJOR); +MODULE_ALIAS_SCSI_DEVICE(TYPE_MEDIUM_CHANGER); static int init = 1; module_param(init, int, 0444); -- cgit v0.10.2 From dec3f95959bff957f5bcbf16c2a2823f7e33d1e7 Mon Sep 17 00:00:00 2001 From: Eric Moore Date: Mon, 9 Mar 2009 01:27:49 -0600 Subject: [SCSI] mpt2sas: add MPT2SAS_MINOR(221) to miscdevice.h Signed-off-by: Eric Moore Signed-off-by: James Bottomley diff --git a/include/linux/miscdevice.h b/include/linux/miscdevice.h index a820f81..beb6ec9 100644 --- a/include/linux/miscdevice.h +++ b/include/linux/miscdevice.h @@ -26,6 +26,7 @@ #define TUN_MINOR 200 #define MWAVE_MINOR 219 /* ACP/Mwave Modem */ #define MPT_MINOR 220 +#define MPT2SAS_MINOR 221 #define HPET_MINOR 228 #define FUSE_MINOR 229 #define KVM_MINOR 232 -- cgit v0.10.2 From 635374e7eb110e80d9918b8611198edd56a32975 Mon Sep 17 00:00:00 2001 From: Eric Moore Date: Mon, 9 Mar 2009 01:21:12 -0600 Subject: [SCSI] mpt2sas v00.100.11.15 * This is new scsi lld device driver from LSI supporting the SAS 2.0 standard. I have split patchs by filename. * Here is list of new 6gb host controllers: LSI SAS2004 LSI SAS2008 LSI SAS2108 LSI SAS2116 * Here are the changes in the 4th posting of this patch set: (1) fix compile errors when SCSI_MPT2SAS_LOGGING is not enabled (2) add mpt2sas to the SCSI Mid Layer Makefile (3) append mpt2sas_ to the naming of all non-static functions (4) fix oops for SMP_PASSTHRU (5) doorbell algorithm imported changes from windows driver * Here are the changes in the 3rd posting of this patch set: (1) add readl following writel from the function that disables interrupts (2) replace 0xFFFFFFFFFFFFFFFFULL with ~0ULL (3) when calling pci_enable_msix, only pass one msix entry (instead of 15). (4) remove the "current HW implementation uses..... " comment in the sources (5) merged bug fix for SIGIO/POLLIN notifcation; reported by the storlib team. * Here are the changes in the 2nd posting of this patch set: (1) use little endian types in the mpi headers (2) merged in bug fix's from inhouse drivers. Signed-off-by: Eric Moore Tested-by: peter Bogdanovic Signed-off-by: James Bottomley diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig index e420ad0..e2f44e6 100644 --- a/drivers/scsi/Kconfig +++ b/drivers/scsi/Kconfig @@ -571,6 +571,7 @@ config SCSI_ARCMSR_AER To enable this function, choose Y here. source "drivers/scsi/megaraid/Kconfig.megaraid" +source "drivers/scsi/mpt2sas/Kconfig" config SCSI_HPTIOP tristate "HighPoint RocketRAID 3xxx/4xxx Controller support" diff --git a/drivers/scsi/Makefile b/drivers/scsi/Makefile index 05558b1..cf79296 100644 --- a/drivers/scsi/Makefile +++ b/drivers/scsi/Makefile @@ -99,6 +99,7 @@ obj-$(CONFIG_SCSI_DC390T) += tmscsim.o obj-$(CONFIG_MEGARAID_LEGACY) += megaraid.o obj-$(CONFIG_MEGARAID_NEWGEN) += megaraid/ obj-$(CONFIG_MEGARAID_SAS) += megaraid/ +obj-$(CONFIG_SCSI_MPT2SAS) += mpt2sas/ obj-$(CONFIG_SCSI_ACARD) += atp870u.o obj-$(CONFIG_SCSI_SUNESP) += esp_scsi.o sun_esp.o obj-$(CONFIG_SCSI_GDTH) += gdth.o diff --git a/drivers/scsi/mpt2sas/Kconfig b/drivers/scsi/mpt2sas/Kconfig new file mode 100644 index 0000000..4a86855 --- /dev/null +++ b/drivers/scsi/mpt2sas/Kconfig @@ -0,0 +1,66 @@ +# +# Kernel configuration file for the MPT2SAS +# +# This code is based on drivers/scsi/mpt2sas/Kconfig +# Copyright (C) 2007-2008 LSI Corporation +# (mailto:DL-MPTFusionLinux@lsi.com) + +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License +# as published by the Free Software Foundation; either version 2 +# of the License, or (at your option) any later version. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. + +# NO WARRANTY +# THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR +# CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT +# LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT, +# MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is +# solely responsible for determining the appropriateness of using and +# distributing the Program and assumes all risks associated with its +# exercise of rights under this Agreement, including but not limited to +# the risks and costs of program errors, damage to or loss of data, +# programs or equipment, and unavailability or interruption of operations. + +# DISCLAIMER OF LIABILITY +# NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY +# DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL +# DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND +# ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR +# TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE +# USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED +# HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES + +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, +# USA. + +config SCSI_MPT2SAS + tristate "LSI MPT Fusion SAS 2.0 Device Driver" + depends on PCI && SCSI + select SCSI_SAS_ATTRS + ---help--- + This driver supports PCI-Express SAS 6Gb/s Host Adapters. + +config SCSI_MPT2SAS_MAX_SGE + int "LSI MPT Fusion Max number of SG Entries (16 - 128)" + depends on PCI && SCSI && SCSI_MPT2SAS + default "128" + range 16 128 + ---help--- + This option allows you to specify the maximum number of scatter- + gather entries per I/O. The driver default is 128, which matches + SAFE_PHYS_SEGMENTS. However, it may decreased down to 16. + Decreasing this parameter will reduce memory requirements + on a per controller instance. + +config SCSI_MPT2SAS_LOGGING + bool "LSI MPT Fusion logging facility" + depends on PCI && SCSI && SCSI_MPT2SAS + ---help--- + This turns on a logging facility. diff --git a/drivers/scsi/mpt2sas/Makefile b/drivers/scsi/mpt2sas/Makefile new file mode 100644 index 0000000..728f047 --- /dev/null +++ b/drivers/scsi/mpt2sas/Makefile @@ -0,0 +1,7 @@ +# mpt2sas makefile +obj-$(CONFIG_SCSI_MPT2SAS) += mpt2sas.o +mpt2sas-y += mpt2sas_base.o \ + mpt2sas_config.o \ + mpt2sas_scsih.o \ + mpt2sas_transport.o \ + mpt2sas_ctl.o diff --git a/drivers/scsi/mpt2sas/mpi/mpi2.h b/drivers/scsi/mpt2sas/mpi/mpi2.h new file mode 100644 index 0000000..7bb2ece --- /dev/null +++ b/drivers/scsi/mpt2sas/mpi/mpi2.h @@ -0,0 +1,1067 @@ +/* + * Copyright (c) 2000-2009 LSI Corporation. + * + * + * Name: mpi2.h + * Title: MPI Message independent structures and definitions + * including System Interface Register Set and + * scatter/gather formats. + * Creation Date: June 21, 2006 + * + * mpi2.h Version: 02.00.11 + * + * Version History + * --------------- + * + * Date Version Description + * -------- -------- ------------------------------------------------------ + * 04-30-07 02.00.00 Corresponds to Fusion-MPT MPI Specification Rev A. + * 06-04-07 02.00.01 Bumped MPI2_HEADER_VERSION_UNIT. + * 06-26-07 02.00.02 Bumped MPI2_HEADER_VERSION_UNIT. + * 08-31-07 02.00.03 Bumped MPI2_HEADER_VERSION_UNIT. + * Moved ReplyPostHostIndex register to offset 0x6C of the + * MPI2_SYSTEM_INTERFACE_REGS and modified the define for + * MPI2_REPLY_POST_HOST_INDEX_OFFSET. + * Added union of request descriptors. + * Added union of reply descriptors. + * 10-31-07 02.00.04 Bumped MPI2_HEADER_VERSION_UNIT. + * Added define for MPI2_VERSION_02_00. + * Fixed the size of the FunctionDependent5 field in the + * MPI2_DEFAULT_REPLY structure. + * 12-18-07 02.00.05 Bumped MPI2_HEADER_VERSION_UNIT. + * Removed the MPI-defined Fault Codes and extended the + * product specific codes up to 0xEFFF. + * Added a sixth key value for the WriteSequence register + * and changed the flush value to 0x0. + * Added message function codes for Diagnostic Buffer Post + * and Diagnsotic Release. + * New IOCStatus define: MPI2_IOCSTATUS_DIAGNOSTIC_RELEASED + * Moved MPI2_VERSION_UNION from mpi2_ioc.h. + * 02-29-08 02.00.06 Bumped MPI2_HEADER_VERSION_UNIT. + * 03-03-08 02.00.07 Bumped MPI2_HEADER_VERSION_UNIT. + * 05-21-08 02.00.08 Bumped MPI2_HEADER_VERSION_UNIT. + * Added #defines for marking a reply descriptor as unused. + * 06-27-08 02.00.09 Bumped MPI2_HEADER_VERSION_UNIT. + * 10-02-08 02.00.10 Bumped MPI2_HEADER_VERSION_UNIT. + * Moved LUN field defines from mpi2_init.h. + * 01-19-09 02.00.11 Bumped MPI2_HEADER_VERSION_UNIT. + * -------------------------------------------------------------------------- + */ + +#ifndef MPI2_H +#define MPI2_H + + +/***************************************************************************** +* +* MPI Version Definitions +* +*****************************************************************************/ + +#define MPI2_VERSION_MAJOR (0x02) +#define MPI2_VERSION_MINOR (0x00) +#define MPI2_VERSION_MAJOR_MASK (0xFF00) +#define MPI2_VERSION_MAJOR_SHIFT (8) +#define MPI2_VERSION_MINOR_MASK (0x00FF) +#define MPI2_VERSION_MINOR_SHIFT (0) +#define MPI2_VERSION ((MPI2_VERSION_MAJOR << MPI2_VERSION_MAJOR_SHIFT) | \ + MPI2_VERSION_MINOR) + +#define MPI2_VERSION_02_00 (0x0200) + +/* versioning for this MPI header set */ +#define MPI2_HEADER_VERSION_UNIT (0x0B) +#define MPI2_HEADER_VERSION_DEV (0x00) +#define MPI2_HEADER_VERSION_UNIT_MASK (0xFF00) +#define MPI2_HEADER_VERSION_UNIT_SHIFT (8) +#define MPI2_HEADER_VERSION_DEV_MASK (0x00FF) +#define MPI2_HEADER_VERSION_DEV_SHIFT (0) +#define MPI2_HEADER_VERSION ((MPI2_HEADER_VERSION_UNIT << 8) | MPI2_HEADER_VERSION_DEV) + + +/***************************************************************************** +* +* IOC State Definitions +* +*****************************************************************************/ + +#define MPI2_IOC_STATE_RESET (0x00000000) +#define MPI2_IOC_STATE_READY (0x10000000) +#define MPI2_IOC_STATE_OPERATIONAL (0x20000000) +#define MPI2_IOC_STATE_FAULT (0x40000000) + +#define MPI2_IOC_STATE_MASK (0xF0000000) +#define MPI2_IOC_STATE_SHIFT (28) + +/* Fault state range for prodcut specific codes */ +#define MPI2_FAULT_PRODUCT_SPECIFIC_MIN (0x0000) +#define MPI2_FAULT_PRODUCT_SPECIFIC_MAX (0xEFFF) + + +/***************************************************************************** +* +* System Interface Register Definitions +* +*****************************************************************************/ + +typedef volatile struct _MPI2_SYSTEM_INTERFACE_REGS +{ + U32 Doorbell; /* 0x00 */ + U32 WriteSequence; /* 0x04 */ + U32 HostDiagnostic; /* 0x08 */ + U32 Reserved1; /* 0x0C */ + U32 DiagRWData; /* 0x10 */ + U32 DiagRWAddressLow; /* 0x14 */ + U32 DiagRWAddressHigh; /* 0x18 */ + U32 Reserved2[5]; /* 0x1C */ + U32 HostInterruptStatus; /* 0x30 */ + U32 HostInterruptMask; /* 0x34 */ + U32 DCRData; /* 0x38 */ + U32 DCRAddress; /* 0x3C */ + U32 Reserved3[2]; /* 0x40 */ + U32 ReplyFreeHostIndex; /* 0x48 */ + U32 Reserved4[8]; /* 0x4C */ + U32 ReplyPostHostIndex; /* 0x6C */ + U32 Reserved5; /* 0x70 */ + U32 HCBSize; /* 0x74 */ + U32 HCBAddressLow; /* 0x78 */ + U32 HCBAddressHigh; /* 0x7C */ + U32 Reserved6[16]; /* 0x80 */ + U32 RequestDescriptorPostLow; /* 0xC0 */ + U32 RequestDescriptorPostHigh; /* 0xC4 */ + U32 Reserved7[14]; /* 0xC8 */ +} MPI2_SYSTEM_INTERFACE_REGS, MPI2_POINTER PTR_MPI2_SYSTEM_INTERFACE_REGS, + Mpi2SystemInterfaceRegs_t, MPI2_POINTER pMpi2SystemInterfaceRegs_t; + +/* + * Defines for working with the Doorbell register. + */ +#define MPI2_DOORBELL_OFFSET (0x00000000) + +/* IOC --> System values */ +#define MPI2_DOORBELL_USED (0x08000000) +#define MPI2_DOORBELL_WHO_INIT_MASK (0x07000000) +#define MPI2_DOORBELL_WHO_INIT_SHIFT (24) +#define MPI2_DOORBELL_FAULT_CODE_MASK (0x0000FFFF) +#define MPI2_DOORBELL_DATA_MASK (0x0000FFFF) + +/* System --> IOC values */ +#define MPI2_DOORBELL_FUNCTION_MASK (0xFF000000) +#define MPI2_DOORBELL_FUNCTION_SHIFT (24) +#define MPI2_DOORBELL_ADD_DWORDS_MASK (0x00FF0000) +#define MPI2_DOORBELL_ADD_DWORDS_SHIFT (16) + + +/* + * Defines for the WriteSequence register + */ +#define MPI2_WRITE_SEQUENCE_OFFSET (0x00000004) +#define MPI2_WRSEQ_KEY_VALUE_MASK (0x0000000F) +#define MPI2_WRSEQ_FLUSH_KEY_VALUE (0x0) +#define MPI2_WRSEQ_1ST_KEY_VALUE (0xF) +#define MPI2_WRSEQ_2ND_KEY_VALUE (0x4) +#define MPI2_WRSEQ_3RD_KEY_VALUE (0xB) +#define MPI2_WRSEQ_4TH_KEY_VALUE (0x2) +#define MPI2_WRSEQ_5TH_KEY_VALUE (0x7) +#define MPI2_WRSEQ_6TH_KEY_VALUE (0xD) + +/* + * Defines for the HostDiagnostic register + */ +#define MPI2_HOST_DIAGNOSTIC_OFFSET (0x00000008) + +#define MPI2_DIAG_BOOT_DEVICE_SELECT_MASK (0x00001800) +#define MPI2_DIAG_BOOT_DEVICE_SELECT_DEFAULT (0x00000000) +#define MPI2_DIAG_BOOT_DEVICE_SELECT_HCDW (0x00000800) + +#define MPI2_DIAG_CLEAR_FLASH_BAD_SIG (0x00000400) +#define MPI2_DIAG_FORCE_HCB_ON_RESET (0x00000200) +#define MPI2_DIAG_HCB_MODE (0x00000100) +#define MPI2_DIAG_DIAG_WRITE_ENABLE (0x00000080) +#define MPI2_DIAG_FLASH_BAD_SIG (0x00000040) +#define MPI2_DIAG_RESET_HISTORY (0x00000020) +#define MPI2_DIAG_DIAG_RW_ENABLE (0x00000010) +#define MPI2_DIAG_RESET_ADAPTER (0x00000004) +#define MPI2_DIAG_HOLD_IOC_RESET (0x00000002) + +/* + * Offsets for DiagRWData and address + */ +#define MPI2_DIAG_RW_DATA_OFFSET (0x00000010) +#define MPI2_DIAG_RW_ADDRESS_LOW_OFFSET (0x00000014) +#define MPI2_DIAG_RW_ADDRESS_HIGH_OFFSET (0x00000018) + +/* + * Defines for the HostInterruptStatus register + */ +#define MPI2_HOST_INTERRUPT_STATUS_OFFSET (0x00000030) +#define MPI2_HIS_SYS2IOC_DB_STATUS (0x80000000) +#define MPI2_HIS_IOP_DOORBELL_STATUS MPI2_HIS_SYS2IOC_DB_STATUS +#define MPI2_HIS_RESET_IRQ_STATUS (0x40000000) +#define MPI2_HIS_REPLY_DESCRIPTOR_INTERRUPT (0x00000008) +#define MPI2_HIS_IOC2SYS_DB_STATUS (0x00000001) +#define MPI2_HIS_DOORBELL_INTERRUPT MPI2_HIS_IOC2SYS_DB_STATUS + +/* + * Defines for the HostInterruptMask register + */ +#define MPI2_HOST_INTERRUPT_MASK_OFFSET (0x00000034) +#define MPI2_HIM_RESET_IRQ_MASK (0x40000000) +#define MPI2_HIM_REPLY_INT_MASK (0x00000008) +#define MPI2_HIM_RIM MPI2_HIM_REPLY_INT_MASK +#define MPI2_HIM_IOC2SYS_DB_MASK (0x00000001) +#define MPI2_HIM_DIM MPI2_HIM_IOC2SYS_DB_MASK + +/* + * Offsets for DCRData and address + */ +#define MPI2_DCR_DATA_OFFSET (0x00000038) +#define MPI2_DCR_ADDRESS_OFFSET (0x0000003C) + +/* + * Offset for the Reply Free Queue + */ +#define MPI2_REPLY_FREE_HOST_INDEX_OFFSET (0x00000048) + +/* + * Offset for the Reply Descriptor Post Queue + */ +#define MPI2_REPLY_POST_HOST_INDEX_OFFSET (0x0000006C) + +/* + * Defines for the HCBSize and address + */ +#define MPI2_HCB_SIZE_OFFSET (0x00000074) +#define MPI2_HCB_SIZE_SIZE_MASK (0xFFFFF000) +#define MPI2_HCB_SIZE_HCB_ENABLE (0x00000001) + +#define MPI2_HCB_ADDRESS_LOW_OFFSET (0x00000078) +#define MPI2_HCB_ADDRESS_HIGH_OFFSET (0x0000007C) + +/* + * Offsets for the Request Queue + */ +#define MPI2_REQUEST_DESCRIPTOR_POST_LOW_OFFSET (0x000000C0) +#define MPI2_REQUEST_DESCRIPTOR_POST_HIGH_OFFSET (0x000000C4) + + +/***************************************************************************** +* +* Message Descriptors +* +*****************************************************************************/ + +/* Request Descriptors */ + +/* Default Request Descriptor */ +typedef struct _MPI2_DEFAULT_REQUEST_DESCRIPTOR +{ + U8 RequestFlags; /* 0x00 */ + U8 VF_ID; /* 0x01 */ + U16 SMID; /* 0x02 */ + U16 LMID; /* 0x04 */ + U16 DescriptorTypeDependent; /* 0x06 */ +} MPI2_DEFAULT_REQUEST_DESCRIPTOR, + MPI2_POINTER PTR_MPI2_DEFAULT_REQUEST_DESCRIPTOR, + Mpi2DefaultRequestDescriptor_t, MPI2_POINTER pMpi2DefaultRequestDescriptor_t; + +/* defines for the RequestFlags field */ +#define MPI2_REQ_DESCRIPT_FLAGS_TYPE_MASK (0x0E) +#define MPI2_REQ_DESCRIPT_FLAGS_SCSI_IO (0x00) +#define MPI2_REQ_DESCRIPT_FLAGS_SCSI_TARGET (0x02) +#define MPI2_REQ_DESCRIPT_FLAGS_HIGH_PRIORITY (0x06) +#define MPI2_REQ_DESCRIPT_FLAGS_DEFAULT_TYPE (0x08) + +#define MPI2_REQ_DESCRIPT_FLAGS_IOC_FIFO_MARKER (0x01) + + +/* High Priority Request Descriptor */ +typedef struct _MPI2_HIGH_PRIORITY_REQUEST_DESCRIPTOR +{ + U8 RequestFlags; /* 0x00 */ + U8 VF_ID; /* 0x01 */ + U16 SMID; /* 0x02 */ + U16 LMID; /* 0x04 */ + U16 Reserved1; /* 0x06 */ +} MPI2_HIGH_PRIORITY_REQUEST_DESCRIPTOR, + MPI2_POINTER PTR_MPI2_HIGH_PRIORITY_REQUEST_DESCRIPTOR, + Mpi2HighPriorityRequestDescriptor_t, + MPI2_POINTER pMpi2HighPriorityRequestDescriptor_t; + + +/* SCSI IO Request Descriptor */ +typedef struct _MPI2_SCSI_IO_REQUEST_DESCRIPTOR +{ + U8 RequestFlags; /* 0x00 */ + U8 VF_ID; /* 0x01 */ + U16 SMID; /* 0x02 */ + U16 LMID; /* 0x04 */ + U16 DevHandle; /* 0x06 */ +} MPI2_SCSI_IO_REQUEST_DESCRIPTOR, + MPI2_POINTER PTR_MPI2_SCSI_IO_REQUEST_DESCRIPTOR, + Mpi2SCSIIORequestDescriptor_t, MPI2_POINTER pMpi2SCSIIORequestDescriptor_t; + + +/* SCSI Target Request Descriptor */ +typedef struct _MPI2_SCSI_TARGET_REQUEST_DESCRIPTOR +{ + U8 RequestFlags; /* 0x00 */ + U8 VF_ID; /* 0x01 */ + U16 SMID; /* 0x02 */ + U16 LMID; /* 0x04 */ + U16 IoIndex; /* 0x06 */ +} MPI2_SCSI_TARGET_REQUEST_DESCRIPTOR, + MPI2_POINTER PTR_MPI2_SCSI_TARGET_REQUEST_DESCRIPTOR, + Mpi2SCSITargetRequestDescriptor_t, + MPI2_POINTER pMpi2SCSITargetRequestDescriptor_t; + +/* union of Request Descriptors */ +typedef union _MPI2_REQUEST_DESCRIPTOR_UNION +{ + MPI2_DEFAULT_REQUEST_DESCRIPTOR Default; + MPI2_HIGH_PRIORITY_REQUEST_DESCRIPTOR HighPriority; + MPI2_SCSI_IO_REQUEST_DESCRIPTOR SCSIIO; + MPI2_SCSI_TARGET_REQUEST_DESCRIPTOR SCSITarget; + U64 Words; +} MPI2_REQUEST_DESCRIPTOR_UNION, MPI2_POINTER PTR_MPI2_REQUEST_DESCRIPTOR_UNION, + Mpi2RequestDescriptorUnion_t, MPI2_POINTER pMpi2RequestDescriptorUnion_t; + + +/* Reply Descriptors */ + +/* Default Reply Descriptor */ +typedef struct _MPI2_DEFAULT_REPLY_DESCRIPTOR +{ + U8 ReplyFlags; /* 0x00 */ + U8 VF_ID; /* 0x01 */ + U16 DescriptorTypeDependent1; /* 0x02 */ + U32 DescriptorTypeDependent2; /* 0x04 */ +} MPI2_DEFAULT_REPLY_DESCRIPTOR, MPI2_POINTER PTR_MPI2_DEFAULT_REPLY_DESCRIPTOR, + Mpi2DefaultReplyDescriptor_t, MPI2_POINTER pMpi2DefaultReplyDescriptor_t; + +/* defines for the ReplyFlags field */ +#define MPI2_RPY_DESCRIPT_FLAGS_TYPE_MASK (0x0F) +#define MPI2_RPY_DESCRIPT_FLAGS_SCSI_IO_SUCCESS (0x00) +#define MPI2_RPY_DESCRIPT_FLAGS_ADDRESS_REPLY (0x01) +#define MPI2_RPY_DESCRIPT_FLAGS_TARGETASSIST_SUCCESS (0x02) +#define MPI2_RPY_DESCRIPT_FLAGS_TARGET_COMMAND_BUFFER (0x03) +#define MPI2_RPY_DESCRIPT_FLAGS_UNUSED (0x0F) + +/* values for marking a reply descriptor as unused */ +#define MPI2_RPY_DESCRIPT_UNUSED_WORD0_MARK (0xFFFFFFFF) +#define MPI2_RPY_DESCRIPT_UNUSED_WORD1_MARK (0xFFFFFFFF) + +/* Address Reply Descriptor */ +typedef struct _MPI2_ADDRESS_REPLY_DESCRIPTOR +{ + U8 ReplyFlags; /* 0x00 */ + U8 VF_ID; /* 0x01 */ + U16 SMID; /* 0x02 */ + U32 ReplyFrameAddress; /* 0x04 */ +} MPI2_ADDRESS_REPLY_DESCRIPTOR, MPI2_POINTER PTR_MPI2_ADDRESS_REPLY_DESCRIPTOR, + Mpi2AddressReplyDescriptor_t, MPI2_POINTER pMpi2AddressReplyDescriptor_t; + +#define MPI2_ADDRESS_REPLY_SMID_INVALID (0x00) + + +/* SCSI IO Success Reply Descriptor */ +typedef struct _MPI2_SCSI_IO_SUCCESS_REPLY_DESCRIPTOR +{ + U8 ReplyFlags; /* 0x00 */ + U8 VF_ID; /* 0x01 */ + U16 SMID; /* 0x02 */ + U16 TaskTag; /* 0x04 */ + U16 DevHandle; /* 0x06 */ +} MPI2_SCSI_IO_SUCCESS_REPLY_DESCRIPTOR, + MPI2_POINTER PTR_MPI2_SCSI_IO_SUCCESS_REPLY_DESCRIPTOR, + Mpi2SCSIIOSuccessReplyDescriptor_t, + MPI2_POINTER pMpi2SCSIIOSuccessReplyDescriptor_t; + + +/* TargetAssist Success Reply Descriptor */ +typedef struct _MPI2_TARGETASSIST_SUCCESS_REPLY_DESCRIPTOR +{ + U8 ReplyFlags; /* 0x00 */ + U8 VF_ID; /* 0x01 */ + U16 SMID; /* 0x02 */ + U8 SequenceNumber; /* 0x04 */ + U8 Reserved1; /* 0x05 */ + U16 IoIndex; /* 0x06 */ +} MPI2_TARGETASSIST_SUCCESS_REPLY_DESCRIPTOR, + MPI2_POINTER PTR_MPI2_TARGETASSIST_SUCCESS_REPLY_DESCRIPTOR, + Mpi2TargetAssistSuccessReplyDescriptor_t, + MPI2_POINTER pMpi2TargetAssistSuccessReplyDescriptor_t; + + +/* Target Command Buffer Reply Descriptor */ +typedef struct _MPI2_TARGET_COMMAND_BUFFER_REPLY_DESCRIPTOR +{ + U8 ReplyFlags; /* 0x00 */ + U8 VF_ID; /* 0x01 */ + U8 VP_ID; /* 0x02 */ + U8 Flags; /* 0x03 */ + U16 InitiatorDevHandle; /* 0x04 */ + U16 IoIndex; /* 0x06 */ +} MPI2_TARGET_COMMAND_BUFFER_REPLY_DESCRIPTOR, + MPI2_POINTER PTR_MPI2_TARGET_COMMAND_BUFFER_REPLY_DESCRIPTOR, + Mpi2TargetCommandBufferReplyDescriptor_t, + MPI2_POINTER pMpi2TargetCommandBufferReplyDescriptor_t; + +/* defines for Flags field */ +#define MPI2_RPY_DESCRIPT_TCB_FLAGS_PHYNUM_MASK (0x3F) + + +/* union of Reply Descriptors */ +typedef union _MPI2_REPLY_DESCRIPTORS_UNION +{ + MPI2_DEFAULT_REPLY_DESCRIPTOR Default; + MPI2_ADDRESS_REPLY_DESCRIPTOR AddressReply; + MPI2_SCSI_IO_SUCCESS_REPLY_DESCRIPTOR SCSIIOSuccess; + MPI2_TARGETASSIST_SUCCESS_REPLY_DESCRIPTOR TargetAssistSuccess; + MPI2_TARGET_COMMAND_BUFFER_REPLY_DESCRIPTOR TargetCommandBuffer; + U64 Words; +} MPI2_REPLY_DESCRIPTORS_UNION, MPI2_POINTER PTR_MPI2_REPLY_DESCRIPTORS_UNION, + Mpi2ReplyDescriptorsUnion_t, MPI2_POINTER pMpi2ReplyDescriptorsUnion_t; + + + +/***************************************************************************** +* +* Message Functions +* 0x80 -> 0x8F reserved for private message use per product +* +* +*****************************************************************************/ + +#define MPI2_FUNCTION_SCSI_IO_REQUEST (0x00) /* SCSI IO */ +#define MPI2_FUNCTION_SCSI_TASK_MGMT (0x01) /* SCSI Task Management */ +#define MPI2_FUNCTION_IOC_INIT (0x02) /* IOC Init */ +#define MPI2_FUNCTION_IOC_FACTS (0x03) /* IOC Facts */ +#define MPI2_FUNCTION_CONFIG (0x04) /* Configuration */ +#define MPI2_FUNCTION_PORT_FACTS (0x05) /* Port Facts */ +#define MPI2_FUNCTION_PORT_ENABLE (0x06) /* Port Enable */ +#define MPI2_FUNCTION_EVENT_NOTIFICATION (0x07) /* Event Notification */ +#define MPI2_FUNCTION_EVENT_ACK (0x08) /* Event Acknowledge */ +#define MPI2_FUNCTION_FW_DOWNLOAD (0x09) /* FW Download */ +#define MPI2_FUNCTION_TARGET_ASSIST (0x0B) /* Target Assist */ +#define MPI2_FUNCTION_TARGET_STATUS_SEND (0x0C) /* Target Status Send */ +#define MPI2_FUNCTION_TARGET_MODE_ABORT (0x0D) /* Target Mode Abort */ +#define MPI2_FUNCTION_FW_UPLOAD (0x12) /* FW Upload */ +#define MPI2_FUNCTION_RAID_ACTION (0x15) /* RAID Action */ +#define MPI2_FUNCTION_RAID_SCSI_IO_PASSTHROUGH (0x16) /* SCSI IO RAID Passthrough */ +#define MPI2_FUNCTION_TOOLBOX (0x17) /* Toolbox */ +#define MPI2_FUNCTION_SCSI_ENCLOSURE_PROCESSOR (0x18) /* SCSI Enclosure Processor */ +#define MPI2_FUNCTION_SMP_PASSTHROUGH (0x1A) /* SMP Passthrough */ +#define MPI2_FUNCTION_SAS_IO_UNIT_CONTROL (0x1B) /* SAS IO Unit Control */ +#define MPI2_FUNCTION_SATA_PASSTHROUGH (0x1C) /* SATA Passthrough */ +#define MPI2_FUNCTION_DIAG_BUFFER_POST (0x1D) /* Diagnostic Buffer Post */ +#define MPI2_FUNCTION_DIAG_RELEASE (0x1E) /* Diagnostic Release */ +#define MPI2_FUNCTION_TARGET_CMD_BUF_BASE_POST (0x24) /* Target Command Buffer Post Base */ +#define MPI2_FUNCTION_TARGET_CMD_BUF_LIST_POST (0x25) /* Target Command Buffer Post List */ + + + +/* Doorbell functions */ +#define MPI2_FUNCTION_IOC_MESSAGE_UNIT_RESET (0x40) +/* #define MPI2_FUNCTION_IO_UNIT_RESET (0x41) */ +#define MPI2_FUNCTION_HANDSHAKE (0x42) + + +/***************************************************************************** +* +* IOC Status Values +* +*****************************************************************************/ + +/* mask for IOCStatus status value */ +#define MPI2_IOCSTATUS_MASK (0x7FFF) + +/**************************************************************************** +* Common IOCStatus values for all replies +****************************************************************************/ + +#define MPI2_IOCSTATUS_SUCCESS (0x0000) +#define MPI2_IOCSTATUS_INVALID_FUNCTION (0x0001) +#define MPI2_IOCSTATUS_BUSY (0x0002) +#define MPI2_IOCSTATUS_INVALID_SGL (0x0003) +#define MPI2_IOCSTATUS_INTERNAL_ERROR (0x0004) +#define MPI2_IOCSTATUS_INVALID_VPID (0x0005) +#define MPI2_IOCSTATUS_INSUFFICIENT_RESOURCES (0x0006) +#define MPI2_IOCSTATUS_INVALID_FIELD (0x0007) +#define MPI2_IOCSTATUS_INVALID_STATE (0x0008) +#define MPI2_IOCSTATUS_OP_STATE_NOT_SUPPORTED (0x0009) + +/**************************************************************************** +* Config IOCStatus values +****************************************************************************/ + +#define MPI2_IOCSTATUS_CONFIG_INVALID_ACTION (0x0020) +#define MPI2_IOCSTATUS_CONFIG_INVALID_TYPE (0x0021) +#define MPI2_IOCSTATUS_CONFIG_INVALID_PAGE (0x0022) +#define MPI2_IOCSTATUS_CONFIG_INVALID_DATA (0x0023) +#define MPI2_IOCSTATUS_CONFIG_NO_DEFAULTS (0x0024) +#define MPI2_IOCSTATUS_CONFIG_CANT_COMMIT (0x0025) + +/**************************************************************************** +* SCSI IO Reply +****************************************************************************/ + +#define MPI2_IOCSTATUS_SCSI_RECOVERED_ERROR (0x0040) +#define MPI2_IOCSTATUS_SCSI_INVALID_DEVHANDLE (0x0042) +#define MPI2_IOCSTATUS_SCSI_DEVICE_NOT_THERE (0x0043) +#define MPI2_IOCSTATUS_SCSI_DATA_OVERRUN (0x0044) +#define MPI2_IOCSTATUS_SCSI_DATA_UNDERRUN (0x0045) +#define MPI2_IOCSTATUS_SCSI_IO_DATA_ERROR (0x0046) +#define MPI2_IOCSTATUS_SCSI_PROTOCOL_ERROR (0x0047) +#define MPI2_IOCSTATUS_SCSI_TASK_TERMINATED (0x0048) +#define MPI2_IOCSTATUS_SCSI_RESIDUAL_MISMATCH (0x0049) +#define MPI2_IOCSTATUS_SCSI_TASK_MGMT_FAILED (0x004A) +#define MPI2_IOCSTATUS_SCSI_IOC_TERMINATED (0x004B) +#define MPI2_IOCSTATUS_SCSI_EXT_TERMINATED (0x004C) + +/**************************************************************************** +* For use by SCSI Initiator and SCSI Target end-to-end data protection +****************************************************************************/ + +#define MPI2_IOCSTATUS_EEDP_GUARD_ERROR (0x004D) +#define MPI2_IOCSTATUS_EEDP_REF_TAG_ERROR (0x004E) +#define MPI2_IOCSTATUS_EEDP_APP_TAG_ERROR (0x004F) + +/**************************************************************************** +* SCSI Target values +****************************************************************************/ + +#define MPI2_IOCSTATUS_TARGET_INVALID_IO_INDEX (0x0062) +#define MPI2_IOCSTATUS_TARGET_ABORTED (0x0063) +#define MPI2_IOCSTATUS_TARGET_NO_CONN_RETRYABLE (0x0064) +#define MPI2_IOCSTATUS_TARGET_NO_CONNECTION (0x0065) +#define MPI2_IOCSTATUS_TARGET_XFER_COUNT_MISMATCH (0x006A) +#define MPI2_IOCSTATUS_TARGET_DATA_OFFSET_ERROR (0x006D) +#define MPI2_IOCSTATUS_TARGET_TOO_MUCH_WRITE_DATA (0x006E) +#define MPI2_IOCSTATUS_TARGET_IU_TOO_SHORT (0x006F) +#define MPI2_IOCSTATUS_TARGET_ACK_NAK_TIMEOUT (0x0070) +#define MPI2_IOCSTATUS_TARGET_NAK_RECEIVED (0x0071) + +/**************************************************************************** +* Serial Attached SCSI values +****************************************************************************/ + +#define MPI2_IOCSTATUS_SAS_SMP_REQUEST_FAILED (0x0090) +#define MPI2_IOCSTATUS_SAS_SMP_DATA_OVERRUN (0x0091) + +/**************************************************************************** +* Diagnostic Buffer Post / Diagnostic Release values +****************************************************************************/ + +#define MPI2_IOCSTATUS_DIAGNOSTIC_RELEASED (0x00A0) + + +/**************************************************************************** +* IOCStatus flag to indicate that log info is available +****************************************************************************/ + +#define MPI2_IOCSTATUS_FLAG_LOG_INFO_AVAILABLE (0x8000) + +/**************************************************************************** +* IOCLogInfo Types +****************************************************************************/ + +#define MPI2_IOCLOGINFO_TYPE_MASK (0xF0000000) +#define MPI2_IOCLOGINFO_TYPE_SHIFT (28) +#define MPI2_IOCLOGINFO_TYPE_NONE (0x0) +#define MPI2_IOCLOGINFO_TYPE_SCSI (0x1) +#define MPI2_IOCLOGINFO_TYPE_FC (0x2) +#define MPI2_IOCLOGINFO_TYPE_SAS (0x3) +#define MPI2_IOCLOGINFO_TYPE_ISCSI (0x4) +#define MPI2_IOCLOGINFO_LOG_DATA_MASK (0x0FFFFFFF) + + +/***************************************************************************** +* +* Standard Message Structures +* +*****************************************************************************/ + +/**************************************************************************** +* Request Message Header for all request messages +****************************************************************************/ + +typedef struct _MPI2_REQUEST_HEADER +{ + U16 FunctionDependent1; /* 0x00 */ + U8 ChainOffset; /* 0x02 */ + U8 Function; /* 0x03 */ + U16 FunctionDependent2; /* 0x04 */ + U8 FunctionDependent3; /* 0x06 */ + U8 MsgFlags; /* 0x07 */ + U8 VP_ID; /* 0x08 */ + U8 VF_ID; /* 0x09 */ + U16 Reserved1; /* 0x0A */ +} MPI2_REQUEST_HEADER, MPI2_POINTER PTR_MPI2_REQUEST_HEADER, + MPI2RequestHeader_t, MPI2_POINTER pMPI2RequestHeader_t; + + +/**************************************************************************** +* Default Reply +****************************************************************************/ + +typedef struct _MPI2_DEFAULT_REPLY +{ + U16 FunctionDependent1; /* 0x00 */ + U8 MsgLength; /* 0x02 */ + U8 Function; /* 0x03 */ + U16 FunctionDependent2; /* 0x04 */ + U8 FunctionDependent3; /* 0x06 */ + U8 MsgFlags; /* 0x07 */ + U8 VP_ID; /* 0x08 */ + U8 VF_ID; /* 0x09 */ + U16 Reserved1; /* 0x0A */ + U16 FunctionDependent5; /* 0x0C */ + U16 IOCStatus; /* 0x0E */ + U32 IOCLogInfo; /* 0x10 */ +} MPI2_DEFAULT_REPLY, MPI2_POINTER PTR_MPI2_DEFAULT_REPLY, + MPI2DefaultReply_t, MPI2_POINTER pMPI2DefaultReply_t; + + +/* common version structure/union used in messages and configuration pages */ + +typedef struct _MPI2_VERSION_STRUCT +{ + U8 Dev; /* 0x00 */ + U8 Unit; /* 0x01 */ + U8 Minor; /* 0x02 */ + U8 Major; /* 0x03 */ +} MPI2_VERSION_STRUCT; + +typedef union _MPI2_VERSION_UNION +{ + MPI2_VERSION_STRUCT Struct; + U32 Word; +} MPI2_VERSION_UNION; + + +/* LUN field defines, common to many structures */ +#define MPI2_LUN_FIRST_LEVEL_ADDRESSING (0x0000FFFF) +#define MPI2_LUN_SECOND_LEVEL_ADDRESSING (0xFFFF0000) +#define MPI2_LUN_THIRD_LEVEL_ADDRESSING (0x0000FFFF) +#define MPI2_LUN_FOURTH_LEVEL_ADDRESSING (0xFFFF0000) +#define MPI2_LUN_LEVEL_1_WORD (0xFF00) +#define MPI2_LUN_LEVEL_1_DWORD (0x0000FF00) + + +/***************************************************************************** +* +* Fusion-MPT MPI Scatter Gather Elements +* +*****************************************************************************/ + +/**************************************************************************** +* MPI Simple Element structures +****************************************************************************/ + +typedef struct _MPI2_SGE_SIMPLE32 +{ + U32 FlagsLength; + U32 Address; +} MPI2_SGE_SIMPLE32, MPI2_POINTER PTR_MPI2_SGE_SIMPLE32, + Mpi2SGESimple32_t, MPI2_POINTER pMpi2SGESimple32_t; + +typedef struct _MPI2_SGE_SIMPLE64 +{ + U32 FlagsLength; + U64 Address; +} MPI2_SGE_SIMPLE64, MPI2_POINTER PTR_MPI2_SGE_SIMPLE64, + Mpi2SGESimple64_t, MPI2_POINTER pMpi2SGESimple64_t; + +typedef struct _MPI2_SGE_SIMPLE_UNION +{ + U32 FlagsLength; + union + { + U32 Address32; + U64 Address64; + } u; +} MPI2_SGE_SIMPLE_UNION, MPI2_POINTER PTR_MPI2_SGE_SIMPLE_UNION, + Mpi2SGESimpleUnion_t, MPI2_POINTER pMpi2SGESimpleUnion_t; + + +/**************************************************************************** +* MPI Chain Element structures +****************************************************************************/ + +typedef struct _MPI2_SGE_CHAIN32 +{ + U16 Length; + U8 NextChainOffset; + U8 Flags; + U32 Address; +} MPI2_SGE_CHAIN32, MPI2_POINTER PTR_MPI2_SGE_CHAIN32, + Mpi2SGEChain32_t, MPI2_POINTER pMpi2SGEChain32_t; + +typedef struct _MPI2_SGE_CHAIN64 +{ + U16 Length; + U8 NextChainOffset; + U8 Flags; + U64 Address; +} MPI2_SGE_CHAIN64, MPI2_POINTER PTR_MPI2_SGE_CHAIN64, + Mpi2SGEChain64_t, MPI2_POINTER pMpi2SGEChain64_t; + +typedef struct _MPI2_SGE_CHAIN_UNION +{ + U16 Length; + U8 NextChainOffset; + U8 Flags; + union + { + U32 Address32; + U64 Address64; + } u; +} MPI2_SGE_CHAIN_UNION, MPI2_POINTER PTR_MPI2_SGE_CHAIN_UNION, + Mpi2SGEChainUnion_t, MPI2_POINTER pMpi2SGEChainUnion_t; + + +/**************************************************************************** +* MPI Transaction Context Element structures +****************************************************************************/ + +typedef struct _MPI2_SGE_TRANSACTION32 +{ + U8 Reserved; + U8 ContextSize; + U8 DetailsLength; + U8 Flags; + U32 TransactionContext[1]; + U32 TransactionDetails[1]; +} MPI2_SGE_TRANSACTION32, MPI2_POINTER PTR_MPI2_SGE_TRANSACTION32, + Mpi2SGETransaction32_t, MPI2_POINTER pMpi2SGETransaction32_t; + +typedef struct _MPI2_SGE_TRANSACTION64 +{ + U8 Reserved; + U8 ContextSize; + U8 DetailsLength; + U8 Flags; + U32 TransactionContext[2]; + U32 TransactionDetails[1]; +} MPI2_SGE_TRANSACTION64, MPI2_POINTER PTR_MPI2_SGE_TRANSACTION64, + Mpi2SGETransaction64_t, MPI2_POINTER pMpi2SGETransaction64_t; + +typedef struct _MPI2_SGE_TRANSACTION96 +{ + U8 Reserved; + U8 ContextSize; + U8 DetailsLength; + U8 Flags; + U32 TransactionContext[3]; + U32 TransactionDetails[1]; +} MPI2_SGE_TRANSACTION96, MPI2_POINTER PTR_MPI2_SGE_TRANSACTION96, + Mpi2SGETransaction96_t, MPI2_POINTER pMpi2SGETransaction96_t; + +typedef struct _MPI2_SGE_TRANSACTION128 +{ + U8 Reserved; + U8 ContextSize; + U8 DetailsLength; + U8 Flags; + U32 TransactionContext[4]; + U32 TransactionDetails[1]; +} MPI2_SGE_TRANSACTION128, MPI2_POINTER PTR_MPI2_SGE_TRANSACTION128, + Mpi2SGETransaction_t128, MPI2_POINTER pMpi2SGETransaction_t128; + +typedef struct _MPI2_SGE_TRANSACTION_UNION +{ + U8 Reserved; + U8 ContextSize; + U8 DetailsLength; + U8 Flags; + union + { + U32 TransactionContext32[1]; + U32 TransactionContext64[2]; + U32 TransactionContext96[3]; + U32 TransactionContext128[4]; + } u; + U32 TransactionDetails[1]; +} MPI2_SGE_TRANSACTION_UNION, MPI2_POINTER PTR_MPI2_SGE_TRANSACTION_UNION, + Mpi2SGETransactionUnion_t, MPI2_POINTER pMpi2SGETransactionUnion_t; + + +/**************************************************************************** +* MPI SGE union for IO SGL's +****************************************************************************/ + +typedef struct _MPI2_MPI_SGE_IO_UNION +{ + union + { + MPI2_SGE_SIMPLE_UNION Simple; + MPI2_SGE_CHAIN_UNION Chain; + } u; +} MPI2_MPI_SGE_IO_UNION, MPI2_POINTER PTR_MPI2_MPI_SGE_IO_UNION, + Mpi2MpiSGEIOUnion_t, MPI2_POINTER pMpi2MpiSGEIOUnion_t; + + +/**************************************************************************** +* MPI SGE union for SGL's with Simple and Transaction elements +****************************************************************************/ + +typedef struct _MPI2_SGE_TRANS_SIMPLE_UNION +{ + union + { + MPI2_SGE_SIMPLE_UNION Simple; + MPI2_SGE_TRANSACTION_UNION Transaction; + } u; +} MPI2_SGE_TRANS_SIMPLE_UNION, MPI2_POINTER PTR_MPI2_SGE_TRANS_SIMPLE_UNION, + Mpi2SGETransSimpleUnion_t, MPI2_POINTER pMpi2SGETransSimpleUnion_t; + + +/**************************************************************************** +* All MPI SGE types union +****************************************************************************/ + +typedef struct _MPI2_MPI_SGE_UNION +{ + union + { + MPI2_SGE_SIMPLE_UNION Simple; + MPI2_SGE_CHAIN_UNION Chain; + MPI2_SGE_TRANSACTION_UNION Transaction; + } u; +} MPI2_MPI_SGE_UNION, MPI2_POINTER PTR_MPI2_MPI_SGE_UNION, + Mpi2MpiSgeUnion_t, MPI2_POINTER pMpi2MpiSgeUnion_t; + + +/**************************************************************************** +* MPI SGE field definition and masks +****************************************************************************/ + +/* Flags field bit definitions */ + +#define MPI2_SGE_FLAGS_LAST_ELEMENT (0x80) +#define MPI2_SGE_FLAGS_END_OF_BUFFER (0x40) +#define MPI2_SGE_FLAGS_ELEMENT_TYPE_MASK (0x30) +#define MPI2_SGE_FLAGS_LOCAL_ADDRESS (0x08) +#define MPI2_SGE_FLAGS_DIRECTION (0x04) +#define MPI2_SGE_FLAGS_ADDRESS_SIZE (0x02) +#define MPI2_SGE_FLAGS_END_OF_LIST (0x01) + +#define MPI2_SGE_FLAGS_SHIFT (24) + +#define MPI2_SGE_LENGTH_MASK (0x00FFFFFF) +#define MPI2_SGE_CHAIN_LENGTH_MASK (0x0000FFFF) + +/* Element Type */ + +#define MPI2_SGE_FLAGS_TRANSACTION_ELEMENT (0x00) +#define MPI2_SGE_FLAGS_SIMPLE_ELEMENT (0x10) +#define MPI2_SGE_FLAGS_CHAIN_ELEMENT (0x30) +#define MPI2_SGE_FLAGS_ELEMENT_MASK (0x30) + +/* Address location */ + +#define MPI2_SGE_FLAGS_SYSTEM_ADDRESS (0x00) + +/* Direction */ + +#define MPI2_SGE_FLAGS_IOC_TO_HOST (0x00) +#define MPI2_SGE_FLAGS_HOST_TO_IOC (0x04) + +/* Address Size */ + +#define MPI2_SGE_FLAGS_32_BIT_ADDRESSING (0x00) +#define MPI2_SGE_FLAGS_64_BIT_ADDRESSING (0x02) + +/* Context Size */ + +#define MPI2_SGE_FLAGS_32_BIT_CONTEXT (0x00) +#define MPI2_SGE_FLAGS_64_BIT_CONTEXT (0x02) +#define MPI2_SGE_FLAGS_96_BIT_CONTEXT (0x04) +#define MPI2_SGE_FLAGS_128_BIT_CONTEXT (0x06) + +#define MPI2_SGE_CHAIN_OFFSET_MASK (0x00FF0000) +#define MPI2_SGE_CHAIN_OFFSET_SHIFT (16) + +/**************************************************************************** +* MPI SGE operation Macros +****************************************************************************/ + +/* SIMPLE FlagsLength manipulations... */ +#define MPI2_SGE_SET_FLAGS(f) ((U32)(f) << MPI2_SGE_FLAGS_SHIFT) +#define MPI2_SGE_GET_FLAGS(f) (((f) & ~MPI2_SGE_LENGTH_MASK) >> MPI2_SGE_FLAGS_SHIFT) +#define MPI2_SGE_LENGTH(f) ((f) & MPI2_SGE_LENGTH_MASK) +#define MPI2_SGE_CHAIN_LENGTH(f) ((f) & MPI2_SGE_CHAIN_LENGTH_MASK) + +#define MPI2_SGE_SET_FLAGS_LENGTH(f,l) (MPI2_SGE_SET_FLAGS(f) | MPI2_SGE_LENGTH(l)) + +#define MPI2_pSGE_GET_FLAGS(psg) MPI2_SGE_GET_FLAGS((psg)->FlagsLength) +#define MPI2_pSGE_GET_LENGTH(psg) MPI2_SGE_LENGTH((psg)->FlagsLength) +#define MPI2_pSGE_SET_FLAGS_LENGTH(psg,f,l) (psg)->FlagsLength = MPI2_SGE_SET_FLAGS_LENGTH(f,l) + +/* CAUTION - The following are READ-MODIFY-WRITE! */ +#define MPI2_pSGE_SET_FLAGS(psg,f) (psg)->FlagsLength |= MPI2_SGE_SET_FLAGS(f) +#define MPI2_pSGE_SET_LENGTH(psg,l) (psg)->FlagsLength |= MPI2_SGE_LENGTH(l) + +#define MPI2_GET_CHAIN_OFFSET(x) ((x & MPI2_SGE_CHAIN_OFFSET_MASK) >> MPI2_SGE_CHAIN_OFFSET_SHIFT) + + +/***************************************************************************** +* +* Fusion-MPT IEEE Scatter Gather Elements +* +*****************************************************************************/ + +/**************************************************************************** +* IEEE Simple Element structures +****************************************************************************/ + +typedef struct _MPI2_IEEE_SGE_SIMPLE32 +{ + U32 Address; + U32 FlagsLength; +} MPI2_IEEE_SGE_SIMPLE32, MPI2_POINTER PTR_MPI2_IEEE_SGE_SIMPLE32, + Mpi2IeeeSgeSimple32_t, MPI2_POINTER pMpi2IeeeSgeSimple32_t; + +typedef struct _MPI2_IEEE_SGE_SIMPLE64 +{ + U64 Address; + U32 Length; + U16 Reserved1; + U8 Reserved2; + U8 Flags; +} MPI2_IEEE_SGE_SIMPLE64, MPI2_POINTER PTR_MPI2_IEEE_SGE_SIMPLE64, + Mpi2IeeeSgeSimple64_t, MPI2_POINTER pMpi2IeeeSgeSimple64_t; + +typedef union _MPI2_IEEE_SGE_SIMPLE_UNION +{ + MPI2_IEEE_SGE_SIMPLE32 Simple32; + MPI2_IEEE_SGE_SIMPLE64 Simple64; +} MPI2_IEEE_SGE_SIMPLE_UNION, MPI2_POINTER PTR_MPI2_IEEE_SGE_SIMPLE_UNION, + Mpi2IeeeSgeSimpleUnion_t, MPI2_POINTER pMpi2IeeeSgeSimpleUnion_t; + + +/**************************************************************************** +* IEEE Chain Element structures +****************************************************************************/ + +typedef MPI2_IEEE_SGE_SIMPLE32 MPI2_IEEE_SGE_CHAIN32; + +typedef MPI2_IEEE_SGE_SIMPLE64 MPI2_IEEE_SGE_CHAIN64; + +typedef union _MPI2_IEEE_SGE_CHAIN_UNION +{ + MPI2_IEEE_SGE_CHAIN32 Chain32; + MPI2_IEEE_SGE_CHAIN64 Chain64; +} MPI2_IEEE_SGE_CHAIN_UNION, MPI2_POINTER PTR_MPI2_IEEE_SGE_CHAIN_UNION, + Mpi2IeeeSgeChainUnion_t, MPI2_POINTER pMpi2IeeeSgeChainUnion_t; + + +/**************************************************************************** +* All IEEE SGE types union +****************************************************************************/ + +typedef struct _MPI2_IEEE_SGE_UNION +{ + union + { + MPI2_IEEE_SGE_SIMPLE_UNION Simple; + MPI2_IEEE_SGE_CHAIN_UNION Chain; + } u; +} MPI2_IEEE_SGE_UNION, MPI2_POINTER PTR_MPI2_IEEE_SGE_UNION, + Mpi2IeeeSgeUnion_t, MPI2_POINTER pMpi2IeeeSgeUnion_t; + + +/**************************************************************************** +* IEEE SGE field definitions and masks +****************************************************************************/ + +/* Flags field bit definitions */ + +#define MPI2_IEEE_SGE_FLAGS_ELEMENT_TYPE_MASK (0x80) + +#define MPI2_IEEE32_SGE_FLAGS_SHIFT (24) + +#define MPI2_IEEE32_SGE_LENGTH_MASK (0x00FFFFFF) + +/* Element Type */ + +#define MPI2_IEEE_SGE_FLAGS_SIMPLE_ELEMENT (0x00) +#define MPI2_IEEE_SGE_FLAGS_CHAIN_ELEMENT (0x80) + +/* Data Location Address Space */ + +#define MPI2_IEEE_SGE_FLAGS_ADDR_MASK (0x03) +#define MPI2_IEEE_SGE_FLAGS_SYSTEM_ADDR (0x00) +#define MPI2_IEEE_SGE_FLAGS_IOCDDR_ADDR (0x01) +#define MPI2_IEEE_SGE_FLAGS_IOCPLB_ADDR (0x02) +#define MPI2_IEEE_SGE_FLAGS_IOCPLBNTA_ADDR (0x03) + + +/**************************************************************************** +* IEEE SGE operation Macros +****************************************************************************/ + +/* SIMPLE FlagsLength manipulations... */ +#define MPI2_IEEE32_SGE_SET_FLAGS(f) ((U32)(f) << MPI2_IEEE32_SGE_FLAGS_SHIFT) +#define MPI2_IEEE32_SGE_GET_FLAGS(f) (((f) & ~MPI2_IEEE32_SGE_LENGTH_MASK) >> MPI2_IEEE32_SGE_FLAGS_SHIFT) +#define MPI2_IEEE32_SGE_LENGTH(f) ((f) & MPI2_IEEE32_SGE_LENGTH_MASK) + +#define MPI2_IEEE32_SGE_SET_FLAGS_LENGTH(f, l) (MPI2_IEEE32_SGE_SET_FLAGS(f) | MPI2_IEEE32_SGE_LENGTH(l)) + +#define MPI2_IEEE32_pSGE_GET_FLAGS(psg) MPI2_IEEE32_SGE_GET_FLAGS((psg)->FlagsLength) +#define MPI2_IEEE32_pSGE_GET_LENGTH(psg) MPI2_IEEE32_SGE_LENGTH((psg)->FlagsLength) +#define MPI2_IEEE32_pSGE_SET_FLAGS_LENGTH(psg,f,l) (psg)->FlagsLength = MPI2_IEEE32_SGE_SET_FLAGS_LENGTH(f,l) + +/* CAUTION - The following are READ-MODIFY-WRITE! */ +#define MPI2_IEEE32_pSGE_SET_FLAGS(psg,f) (psg)->FlagsLength |= MPI2_IEEE32_SGE_SET_FLAGS(f) +#define MPI2_IEEE32_pSGE_SET_LENGTH(psg,l) (psg)->FlagsLength |= MPI2_IEEE32_SGE_LENGTH(l) + + + + +/***************************************************************************** +* +* Fusion-MPT MPI/IEEE Scatter Gather Unions +* +*****************************************************************************/ + +typedef union _MPI2_SIMPLE_SGE_UNION +{ + MPI2_SGE_SIMPLE_UNION MpiSimple; + MPI2_IEEE_SGE_SIMPLE_UNION IeeeSimple; +} MPI2_SIMPLE_SGE_UNION, MPI2_POINTER PTR_MPI2_SIMPLE_SGE_UNION, + Mpi2SimpleSgeUntion_t, MPI2_POINTER pMpi2SimpleSgeUntion_t; + + +typedef union _MPI2_SGE_IO_UNION +{ + MPI2_SGE_SIMPLE_UNION MpiSimple; + MPI2_SGE_CHAIN_UNION MpiChain; + MPI2_IEEE_SGE_SIMPLE_UNION IeeeSimple; + MPI2_IEEE_SGE_CHAIN_UNION IeeeChain; +} MPI2_SGE_IO_UNION, MPI2_POINTER PTR_MPI2_SGE_IO_UNION, + Mpi2SGEIOUnion_t, MPI2_POINTER pMpi2SGEIOUnion_t; + + +/**************************************************************************** +* +* Values for SGLFlags field, used in many request messages with an SGL +* +****************************************************************************/ + +/* values for MPI SGL Data Location Address Space subfield */ +#define MPI2_SGLFLAGS_ADDRESS_SPACE_MASK (0x0C) +#define MPI2_SGLFLAGS_SYSTEM_ADDRESS_SPACE (0x00) +#define MPI2_SGLFLAGS_IOCDDR_ADDRESS_SPACE (0x04) +#define MPI2_SGLFLAGS_IOCPLB_ADDRESS_SPACE (0x08) +#define MPI2_SGLFLAGS_IOCPLBNTA_ADDRESS_SPACE (0x0C) +/* values for SGL Type subfield */ +#define MPI2_SGLFLAGS_SGL_TYPE_MASK (0x03) +#define MPI2_SGLFLAGS_SGL_TYPE_MPI (0x00) +#define MPI2_SGLFLAGS_SGL_TYPE_IEEE32 (0x01) +#define MPI2_SGLFLAGS_SGL_TYPE_IEEE64 (0x02) + + +#endif + diff --git a/drivers/scsi/mpt2sas/mpi/mpi2_cnfg.h b/drivers/scsi/mpt2sas/mpi/mpi2_cnfg.h new file mode 100644 index 0000000..2f27cf6 --- /dev/null +++ b/drivers/scsi/mpt2sas/mpi/mpi2_cnfg.h @@ -0,0 +1,2151 @@ +/* + * Copyright (c) 2000-2009 LSI Corporation. + * + * + * Name: mpi2_cnfg.h + * Title: MPI Configuration messages and pages + * Creation Date: November 10, 2006 + * + * mpi2_cnfg.h Version: 02.00.10 + * + * Version History + * --------------- + * + * Date Version Description + * -------- -------- ------------------------------------------------------ + * 04-30-07 02.00.00 Corresponds to Fusion-MPT MPI Specification Rev A. + * 06-04-07 02.00.01 Added defines for SAS IO Unit Page 2 PhyFlags. + * Added Manufacturing Page 11. + * Added MPI2_SAS_EXPANDER0_FLAGS_CONNECTOR_END_DEVICE + * define. + * 06-26-07 02.00.02 Adding generic structure for product-specific + * Manufacturing pages: MPI2_CONFIG_PAGE_MANUFACTURING_PS. + * Rework of BIOS Page 2 configuration page. + * Fixed MPI2_BIOSPAGE2_BOOT_DEVICE to be a union of the + * forms. + * Added configuration pages IOC Page 8 and Driver + * Persistent Mapping Page 0. + * 08-31-07 02.00.03 Modified configuration pages dealing with Integrated + * RAID (Manufacturing Page 4, RAID Volume Pages 0 and 1, + * RAID Physical Disk Pages 0 and 1, RAID Configuration + * Page 0). + * Added new value for AccessStatus field of SAS Device + * Page 0 (_SATA_NEEDS_INITIALIZATION). + * 10-31-07 02.00.04 Added missing SEPDevHandle field to + * MPI2_CONFIG_PAGE_SAS_ENCLOSURE_0. + * 12-18-07 02.00.05 Modified IO Unit Page 0 to use 32-bit version fields for + * NVDATA. + * Modified IOC Page 7 to use masks and added field for + * SASBroadcastPrimitiveMasks. + * Added MPI2_CONFIG_PAGE_BIOS_4. + * Added MPI2_CONFIG_PAGE_LOG_0. + * 02-29-08 02.00.06 Modified various names to make them 32-character unique. + * Added SAS Device IDs. + * Updated Integrated RAID configuration pages including + * Manufacturing Page 4, IOC Page 6, and RAID Configuration + * Page 0. + * 05-21-08 02.00.07 Added define MPI2_MANPAGE4_MIX_SSD_SAS_SATA. + * Added define MPI2_MANPAGE4_PHYSDISK_128MB_COERCION. + * Fixed define MPI2_IOCPAGE8_FLAGS_ENCLOSURE_SLOT_MAPPING. + * Added missing MaxNumRoutedSasAddresses field to + * MPI2_CONFIG_PAGE_EXPANDER_0. + * Added SAS Port Page 0. + * Modified structure layout for + * MPI2_CONFIG_PAGE_DRIVER_MAPPING_0. + * 06-27-08 02.00.08 Changed MPI2_CONFIG_PAGE_RD_PDISK_1 to use + * MPI2_RAID_PHYS_DISK1_PATH_MAX to size the array. + * 10-02-08 02.00.09 Changed MPI2_RAID_PGAD_CONFIGNUM_MASK from 0x0000FFFF + * to 0x000000FF. + * Added two new values for the Physical Disk Coercion Size + * bits in the Flags field of Manufacturing Page 4. + * Added product-specific Manufacturing pages 16 to 31. + * Modified Flags bits for controlling write cache on SATA + * drives in IO Unit Page 1. + * Added new bit to AdditionalControlFlags of SAS IO Unit + * Page 1 to control Invalid Topology Correction. + * Added additional defines for RAID Volume Page 0 + * VolumeStatusFlags field. + * Modified meaning of RAID Volume Page 0 VolumeSettings + * define for auto-configure of hot-swap drives. + * Added SupportedPhysDisks field to RAID Volume Page 1 and + * added related defines. + * Added PhysDiskAttributes field (and related defines) to + * RAID Physical Disk Page 0. + * Added MPI2_SAS_PHYINFO_PHY_VACANT define. + * Added three new DiscoveryStatus bits for SAS IO Unit + * Page 0 and SAS Expander Page 0. + * Removed multiplexing information from SAS IO Unit pages. + * Added BootDeviceWaitTime field to SAS IO Unit Page 4. + * Removed Zone Address Resolved bit from PhyInfo and from + * Expander Page 0 Flags field. + * Added two new AccessStatus values to SAS Device Page 0 + * for indicating routing problems. Added 3 reserved words + * to this page. + * 01-19-09 02.00.10 Fixed defines for GPIOVal field of IO Unit Page 3. + * Inserted missing reserved field into structure for IOC + * Page 6. + * Added more pending task bits to RAID Volume Page 0 + * VolumeStatusFlags defines. + * Added MPI2_PHYSDISK0_STATUS_FLAG_NOT_CERTIFIED define. + * Added a new DiscoveryStatus bit for SAS IO Unit Page 0 + * and SAS Expander Page 0 to flag a downstream initiator + * when in simplified routing mode. + * Removed SATA Init Failure defines for DiscoveryStatus + * fields of SAS IO Unit Page 0 and SAS Expander Page 0. + * Added MPI2_SAS_DEVICE0_ASTATUS_DEVICE_BLOCKED define. + * Added PortGroups, DmaGroup, and ControlGroup fields to + * SAS Device Page 0. + * -------------------------------------------------------------------------- + */ + +#ifndef MPI2_CNFG_H +#define MPI2_CNFG_H + +/***************************************************************************** +* Configuration Page Header and defines +*****************************************************************************/ + +/* Config Page Header */ +typedef struct _MPI2_CONFIG_PAGE_HEADER +{ + U8 PageVersion; /* 0x00 */ + U8 PageLength; /* 0x01 */ + U8 PageNumber; /* 0x02 */ + U8 PageType; /* 0x03 */ +} MPI2_CONFIG_PAGE_HEADER, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_HEADER, + Mpi2ConfigPageHeader_t, MPI2_POINTER pMpi2ConfigPageHeader_t; + +typedef union _MPI2_CONFIG_PAGE_HEADER_UNION +{ + MPI2_CONFIG_PAGE_HEADER Struct; + U8 Bytes[4]; + U16 Word16[2]; + U32 Word32; +} MPI2_CONFIG_PAGE_HEADER_UNION, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_HEADER_UNION, + Mpi2ConfigPageHeaderUnion, MPI2_POINTER pMpi2ConfigPageHeaderUnion; + +/* Extended Config Page Header */ +typedef struct _MPI2_CONFIG_EXTENDED_PAGE_HEADER +{ + U8 PageVersion; /* 0x00 */ + U8 Reserved1; /* 0x01 */ + U8 PageNumber; /* 0x02 */ + U8 PageType; /* 0x03 */ + U16 ExtPageLength; /* 0x04 */ + U8 ExtPageType; /* 0x06 */ + U8 Reserved2; /* 0x07 */ +} MPI2_CONFIG_EXTENDED_PAGE_HEADER, + MPI2_POINTER PTR_MPI2_CONFIG_EXTENDED_PAGE_HEADER, + Mpi2ConfigExtendedPageHeader_t, MPI2_POINTER pMpi2ConfigExtendedPageHeader_t; + +typedef union _MPI2_CONFIG_EXT_PAGE_HEADER_UNION +{ + MPI2_CONFIG_PAGE_HEADER Struct; + MPI2_CONFIG_EXTENDED_PAGE_HEADER Ext; + U8 Bytes[8]; + U16 Word16[4]; + U32 Word32[2]; +} MPI2_CONFIG_EXT_PAGE_HEADER_UNION, MPI2_POINTER PTR_MPI2_CONFIG_EXT_PAGE_HEADER_UNION, + Mpi2ConfigPageExtendedHeaderUnion, MPI2_POINTER pMpi2ConfigPageExtendedHeaderUnion; + + +/* PageType field values */ +#define MPI2_CONFIG_PAGEATTR_READ_ONLY (0x00) +#define MPI2_CONFIG_PAGEATTR_CHANGEABLE (0x10) +#define MPI2_CONFIG_PAGEATTR_PERSISTENT (0x20) +#define MPI2_CONFIG_PAGEATTR_MASK (0xF0) + +#define MPI2_CONFIG_PAGETYPE_IO_UNIT (0x00) +#define MPI2_CONFIG_PAGETYPE_IOC (0x01) +#define MPI2_CONFIG_PAGETYPE_BIOS (0x02) +#define MPI2_CONFIG_PAGETYPE_RAID_VOLUME (0x08) +#define MPI2_CONFIG_PAGETYPE_MANUFACTURING (0x09) +#define MPI2_CONFIG_PAGETYPE_RAID_PHYSDISK (0x0A) +#define MPI2_CONFIG_PAGETYPE_EXTENDED (0x0F) +#define MPI2_CONFIG_PAGETYPE_MASK (0x0F) + +#define MPI2_CONFIG_TYPENUM_MASK (0x0FFF) + + +/* ExtPageType field values */ +#define MPI2_CONFIG_EXTPAGETYPE_SAS_IO_UNIT (0x10) +#define MPI2_CONFIG_EXTPAGETYPE_SAS_EXPANDER (0x11) +#define MPI2_CONFIG_EXTPAGETYPE_SAS_DEVICE (0x12) +#define MPI2_CONFIG_EXTPAGETYPE_SAS_PHY (0x13) +#define MPI2_CONFIG_EXTPAGETYPE_LOG (0x14) +#define MPI2_CONFIG_EXTPAGETYPE_ENCLOSURE (0x15) +#define MPI2_CONFIG_EXTPAGETYPE_RAID_CONFIG (0x16) +#define MPI2_CONFIG_EXTPAGETYPE_DRIVER_MAPPING (0x17) +#define MPI2_CONFIG_EXTPAGETYPE_SAS_PORT (0x18) + + +/***************************************************************************** +* PageAddress defines +*****************************************************************************/ + +/* RAID Volume PageAddress format */ +#define MPI2_RAID_VOLUME_PGAD_FORM_MASK (0xF0000000) +#define MPI2_RAID_VOLUME_PGAD_FORM_GET_NEXT_HANDLE (0x00000000) +#define MPI2_RAID_VOLUME_PGAD_FORM_HANDLE (0x10000000) + +#define MPI2_RAID_VOLUME_PGAD_HANDLE_MASK (0x0000FFFF) + + +/* RAID Physical Disk PageAddress format */ +#define MPI2_PHYSDISK_PGAD_FORM_MASK (0xF0000000) +#define MPI2_PHYSDISK_PGAD_FORM_GET_NEXT_PHYSDISKNUM (0x00000000) +#define MPI2_PHYSDISK_PGAD_FORM_PHYSDISKNUM (0x10000000) +#define MPI2_PHYSDISK_PGAD_FORM_DEVHANDLE (0x20000000) + +#define MPI2_PHYSDISK_PGAD_PHYSDISKNUM_MASK (0x000000FF) +#define MPI2_PHYSDISK_PGAD_DEVHANDLE_MASK (0x0000FFFF) + + +/* SAS Expander PageAddress format */ +#define MPI2_SAS_EXPAND_PGAD_FORM_MASK (0xF0000000) +#define MPI2_SAS_EXPAND_PGAD_FORM_GET_NEXT_HNDL (0x00000000) +#define MPI2_SAS_EXPAND_PGAD_FORM_HNDL_PHY_NUM (0x10000000) +#define MPI2_SAS_EXPAND_PGAD_FORM_HNDL (0x20000000) + +#define MPI2_SAS_EXPAND_PGAD_HANDLE_MASK (0x0000FFFF) +#define MPI2_SAS_EXPAND_PGAD_PHYNUM_MASK (0x00FF0000) +#define MPI2_SAS_EXPAND_PGAD_PHYNUM_SHIFT (16) + + +/* SAS Device PageAddress format */ +#define MPI2_SAS_DEVICE_PGAD_FORM_MASK (0xF0000000) +#define MPI2_SAS_DEVICE_PGAD_FORM_GET_NEXT_HANDLE (0x00000000) +#define MPI2_SAS_DEVICE_PGAD_FORM_HANDLE (0x20000000) + +#define MPI2_SAS_DEVICE_PGAD_HANDLE_MASK (0x0000FFFF) + + +/* SAS PHY PageAddress format */ +#define MPI2_SAS_PHY_PGAD_FORM_MASK (0xF0000000) +#define MPI2_SAS_PHY_PGAD_FORM_PHY_NUMBER (0x00000000) +#define MPI2_SAS_PHY_PGAD_FORM_PHY_TBL_INDEX (0x10000000) + +#define MPI2_SAS_PHY_PGAD_PHY_NUMBER_MASK (0x000000FF) +#define MPI2_SAS_PHY_PGAD_PHY_TBL_INDEX_MASK (0x0000FFFF) + + +/* SAS Port PageAddress format */ +#define MPI2_SASPORT_PGAD_FORM_MASK (0xF0000000) +#define MPI2_SASPORT_PGAD_FORM_GET_NEXT_PORT (0x00000000) +#define MPI2_SASPORT_PGAD_FORM_PORT_NUM (0x10000000) + +#define MPI2_SASPORT_PGAD_PORTNUMBER_MASK (0x00000FFF) + + +/* SAS Enclosure PageAddress format */ +#define MPI2_SAS_ENCLOS_PGAD_FORM_MASK (0xF0000000) +#define MPI2_SAS_ENCLOS_PGAD_FORM_GET_NEXT_HANDLE (0x00000000) +#define MPI2_SAS_ENCLOS_PGAD_FORM_HANDLE (0x10000000) + +#define MPI2_SAS_ENCLOS_PGAD_HANDLE_MASK (0x0000FFFF) + + +/* RAID Configuration PageAddress format */ +#define MPI2_RAID_PGAD_FORM_MASK (0xF0000000) +#define MPI2_RAID_PGAD_FORM_GET_NEXT_CONFIGNUM (0x00000000) +#define MPI2_RAID_PGAD_FORM_CONFIGNUM (0x10000000) +#define MPI2_RAID_PGAD_FORM_ACTIVE_CONFIG (0x20000000) + +#define MPI2_RAID_PGAD_CONFIGNUM_MASK (0x000000FF) + + +/* Driver Persistent Mapping PageAddress format */ +#define MPI2_DPM_PGAD_FORM_MASK (0xF0000000) +#define MPI2_DPM_PGAD_FORM_ENTRY_RANGE (0x00000000) + +#define MPI2_DPM_PGAD_ENTRY_COUNT_MASK (0x0FFF0000) +#define MPI2_DPM_PGAD_ENTRY_COUNT_SHIFT (16) +#define MPI2_DPM_PGAD_START_ENTRY_MASK (0x0000FFFF) + + +/**************************************************************************** +* Configuration messages +****************************************************************************/ + +/* Configuration Request Message */ +typedef struct _MPI2_CONFIG_REQUEST +{ + U8 Action; /* 0x00 */ + U8 SGLFlags; /* 0x01 */ + U8 ChainOffset; /* 0x02 */ + U8 Function; /* 0x03 */ + U16 ExtPageLength; /* 0x04 */ + U8 ExtPageType; /* 0x06 */ + U8 MsgFlags; /* 0x07 */ + U8 VP_ID; /* 0x08 */ + U8 VF_ID; /* 0x09 */ + U16 Reserved1; /* 0x0A */ + U32 Reserved2; /* 0x0C */ + U32 Reserved3; /* 0x10 */ + MPI2_CONFIG_PAGE_HEADER Header; /* 0x14 */ + U32 PageAddress; /* 0x18 */ + MPI2_SGE_IO_UNION PageBufferSGE; /* 0x1C */ +} MPI2_CONFIG_REQUEST, MPI2_POINTER PTR_MPI2_CONFIG_REQUEST, + Mpi2ConfigRequest_t, MPI2_POINTER pMpi2ConfigRequest_t; + +/* values for the Action field */ +#define MPI2_CONFIG_ACTION_PAGE_HEADER (0x00) +#define MPI2_CONFIG_ACTION_PAGE_READ_CURRENT (0x01) +#define MPI2_CONFIG_ACTION_PAGE_WRITE_CURRENT (0x02) +#define MPI2_CONFIG_ACTION_PAGE_DEFAULT (0x03) +#define MPI2_CONFIG_ACTION_PAGE_WRITE_NVRAM (0x04) +#define MPI2_CONFIG_ACTION_PAGE_READ_DEFAULT (0x05) +#define MPI2_CONFIG_ACTION_PAGE_READ_NVRAM (0x06) +#define MPI2_CONFIG_ACTION_PAGE_GET_CHANGEABLE (0x07) + +/* values for SGLFlags field are in the SGL section of mpi2.h */ + + +/* Config Reply Message */ +typedef struct _MPI2_CONFIG_REPLY +{ + U8 Action; /* 0x00 */ + U8 SGLFlags; /* 0x01 */ + U8 MsgLength; /* 0x02 */ + U8 Function; /* 0x03 */ + U16 ExtPageLength; /* 0x04 */ + U8 ExtPageType; /* 0x06 */ + U8 MsgFlags; /* 0x07 */ + U8 VP_ID; /* 0x08 */ + U8 VF_ID; /* 0x09 */ + U16 Reserved1; /* 0x0A */ + U16 Reserved2; /* 0x0C */ + U16 IOCStatus; /* 0x0E */ + U32 IOCLogInfo; /* 0x10 */ + MPI2_CONFIG_PAGE_HEADER Header; /* 0x14 */ +} MPI2_CONFIG_REPLY, MPI2_POINTER PTR_MPI2_CONFIG_REPLY, + Mpi2ConfigReply_t, MPI2_POINTER pMpi2ConfigReply_t; + + + +/***************************************************************************** +* +* C o n f i g u r a t i o n P a g e s +* +*****************************************************************************/ + +/**************************************************************************** +* Manufacturing Config pages +****************************************************************************/ + +#define MPI2_MFGPAGE_VENDORID_LSI (0x1000) + +/* SAS */ +#define MPI2_MFGPAGE_DEVID_SAS2004 (0x0070) +#define MPI2_MFGPAGE_DEVID_SAS2008 (0x0072) +#define MPI2_MFGPAGE_DEVID_SAS2108_1 (0x0074) +#define MPI2_MFGPAGE_DEVID_SAS2108_2 (0x0076) +#define MPI2_MFGPAGE_DEVID_SAS2108_3 (0x0077) +#define MPI2_MFGPAGE_DEVID_SAS2116_1 (0x0064) +#define MPI2_MFGPAGE_DEVID_SAS2116_2 (0x0065) + + +/* Manufacturing Page 0 */ + +typedef struct _MPI2_CONFIG_PAGE_MAN_0 +{ + MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */ + U8 ChipName[16]; /* 0x04 */ + U8 ChipRevision[8]; /* 0x14 */ + U8 BoardName[16]; /* 0x1C */ + U8 BoardAssembly[16]; /* 0x2C */ + U8 BoardTracerNumber[16]; /* 0x3C */ +} MPI2_CONFIG_PAGE_MAN_0, + MPI2_POINTER PTR_MPI2_CONFIG_PAGE_MAN_0, + Mpi2ManufacturingPage0_t, MPI2_POINTER pMpi2ManufacturingPage0_t; + +#define MPI2_MANUFACTURING0_PAGEVERSION (0x00) + + +/* Manufacturing Page 1 */ + +typedef struct _MPI2_CONFIG_PAGE_MAN_1 +{ + MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */ + U8 VPD[256]; /* 0x04 */ +} MPI2_CONFIG_PAGE_MAN_1, + MPI2_POINTER PTR_MPI2_CONFIG_PAGE_MAN_1, + Mpi2ManufacturingPage1_t, MPI2_POINTER pMpi2ManufacturingPage1_t; + +#define MPI2_MANUFACTURING1_PAGEVERSION (0x00) + + +typedef struct _MPI2_CHIP_REVISION_ID +{ + U16 DeviceID; /* 0x00 */ + U8 PCIRevisionID; /* 0x02 */ + U8 Reserved; /* 0x03 */ +} MPI2_CHIP_REVISION_ID, MPI2_POINTER PTR_MPI2_CHIP_REVISION_ID, + Mpi2ChipRevisionId_t, MPI2_POINTER pMpi2ChipRevisionId_t; + + +/* Manufacturing Page 2 */ + +/* + * Host code (drivers, BIOS, utilities, etc.) should leave this define set to + * one and check Header.PageLength at runtime. + */ +#ifndef MPI2_MAN_PAGE_2_HW_SETTINGS_WORDS +#define MPI2_MAN_PAGE_2_HW_SETTINGS_WORDS (1) +#endif + +typedef struct _MPI2_CONFIG_PAGE_MAN_2 +{ + MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */ + MPI2_CHIP_REVISION_ID ChipId; /* 0x04 */ + U32 HwSettings[MPI2_MAN_PAGE_2_HW_SETTINGS_WORDS];/* 0x08 */ +} MPI2_CONFIG_PAGE_MAN_2, + MPI2_POINTER PTR_MPI2_CONFIG_PAGE_MAN_2, + Mpi2ManufacturingPage2_t, MPI2_POINTER pMpi2ManufacturingPage2_t; + +#define MPI2_MANUFACTURING2_PAGEVERSION (0x00) + + +/* Manufacturing Page 3 */ + +/* + * Host code (drivers, BIOS, utilities, etc.) should leave this define set to + * one and check Header.PageLength at runtime. + */ +#ifndef MPI2_MAN_PAGE_3_INFO_WORDS +#define MPI2_MAN_PAGE_3_INFO_WORDS (1) +#endif + +typedef struct _MPI2_CONFIG_PAGE_MAN_3 +{ + MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */ + MPI2_CHIP_REVISION_ID ChipId; /* 0x04 */ + U32 Info[MPI2_MAN_PAGE_3_INFO_WORDS];/* 0x08 */ +} MPI2_CONFIG_PAGE_MAN_3, + MPI2_POINTER PTR_MPI2_CONFIG_PAGE_MAN_3, + Mpi2ManufacturingPage3_t, MPI2_POINTER pMpi2ManufacturingPage3_t; + +#define MPI2_MANUFACTURING3_PAGEVERSION (0x00) + + +/* Manufacturing Page 4 */ + +typedef struct _MPI2_MANPAGE4_PWR_SAVE_SETTINGS +{ + U8 PowerSaveFlags; /* 0x00 */ + U8 InternalOperationsSleepTime; /* 0x01 */ + U8 InternalOperationsRunTime; /* 0x02 */ + U8 HostIdleTime; /* 0x03 */ +} MPI2_MANPAGE4_PWR_SAVE_SETTINGS, + MPI2_POINTER PTR_MPI2_MANPAGE4_PWR_SAVE_SETTINGS, + Mpi2ManPage4PwrSaveSettings_t, MPI2_POINTER pMpi2ManPage4PwrSaveSettings_t; + +/* defines for the PowerSaveFlags field */ +#define MPI2_MANPAGE4_MASK_POWERSAVE_MODE (0x03) +#define MPI2_MANPAGE4_POWERSAVE_MODE_DISABLED (0x00) +#define MPI2_MANPAGE4_CUSTOM_POWERSAVE_MODE (0x01) +#define MPI2_MANPAGE4_FULL_POWERSAVE_MODE (0x02) + +typedef struct _MPI2_CONFIG_PAGE_MAN_4 +{ + MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */ + U32 Reserved1; /* 0x04 */ + U32 Flags; /* 0x08 */ + U8 InquirySize; /* 0x0C */ + U8 Reserved2; /* 0x0D */ + U16 Reserved3; /* 0x0E */ + U8 InquiryData[56]; /* 0x10 */ + U32 RAID0VolumeSettings; /* 0x48 */ + U32 RAID1EVolumeSettings; /* 0x4C */ + U32 RAID1VolumeSettings; /* 0x50 */ + U32 RAID10VolumeSettings; /* 0x54 */ + U32 Reserved4; /* 0x58 */ + U32 Reserved5; /* 0x5C */ + MPI2_MANPAGE4_PWR_SAVE_SETTINGS PowerSaveSettings; /* 0x60 */ + U8 MaxOCEDisks; /* 0x64 */ + U8 ResyncRate; /* 0x65 */ + U16 DataScrubDuration; /* 0x66 */ + U8 MaxHotSpares; /* 0x68 */ + U8 MaxPhysDisksPerVol; /* 0x69 */ + U8 MaxPhysDisks; /* 0x6A */ + U8 MaxVolumes; /* 0x6B */ +} MPI2_CONFIG_PAGE_MAN_4, + MPI2_POINTER PTR_MPI2_CONFIG_PAGE_MAN_4, + Mpi2ManufacturingPage4_t, MPI2_POINTER pMpi2ManufacturingPage4_t; + +#define MPI2_MANUFACTURING4_PAGEVERSION (0x0A) + +/* Manufacturing Page 4 Flags field */ +#define MPI2_MANPAGE4_METADATA_SIZE_MASK (0x00030000) +#define MPI2_MANPAGE4_METADATA_512MB (0x00000000) + +#define MPI2_MANPAGE4_MIX_SSD_SAS_SATA (0x00008000) +#define MPI2_MANPAGE4_MIX_SSD_AND_NON_SSD (0x00004000) +#define MPI2_MANPAGE4_HIDE_PHYSDISK_NON_IR (0x00002000) + +#define MPI2_MANPAGE4_MASK_PHYSDISK_COERCION (0x00001C00) +#define MPI2_MANPAGE4_PHYSDISK_COERCION_1GB (0x00000000) +#define MPI2_MANPAGE4_PHYSDISK_128MB_COERCION (0x00000400) +#define MPI2_MANPAGE4_PHYSDISK_ADAPTIVE_COERCION (0x00000800) +#define MPI2_MANPAGE4_PHYSDISK_ZERO_COERCION (0x00000C00) + +#define MPI2_MANPAGE4_MASK_BAD_BLOCK_MARKING (0x00000300) +#define MPI2_MANPAGE4_DEFAULT_BAD_BLOCK_MARKING (0x00000000) +#define MPI2_MANPAGE4_TABLE_BAD_BLOCK_MARKING (0x00000100) +#define MPI2_MANPAGE4_WRITE_LONG_BAD_BLOCK_MARKING (0x00000200) + +#define MPI2_MANPAGE4_FORCE_OFFLINE_FAILOVER (0x00000080) +#define MPI2_MANPAGE4_RAID10_DISABLE (0x00000040) +#define MPI2_MANPAGE4_RAID1E_DISABLE (0x00000020) +#define MPI2_MANPAGE4_RAID1_DISABLE (0x00000010) +#define MPI2_MANPAGE4_RAID0_DISABLE (0x00000008) +#define MPI2_MANPAGE4_IR_MODEPAGE8_DISABLE (0x00000004) +#define MPI2_MANPAGE4_IM_RESYNC_CACHE_ENABLE (0x00000002) +#define MPI2_MANPAGE4_IR_NO_MIX_SAS_SATA (0x00000001) + + +/* Manufacturing Page 5 */ + +/* + * Host code (drivers, BIOS, utilities, etc.) should leave this define set to + * one and check Header.PageLength or NumPhys at runtime. + */ +#ifndef MPI2_MAN_PAGE_5_PHY_ENTRIES +#define MPI2_MAN_PAGE_5_PHY_ENTRIES (1) +#endif + +typedef struct _MPI2_MANUFACTURING5_ENTRY +{ + U64 WWID; /* 0x00 */ + U64 DeviceName; /* 0x08 */ +} MPI2_MANUFACTURING5_ENTRY, MPI2_POINTER PTR_MPI2_MANUFACTURING5_ENTRY, + Mpi2Manufacturing5Entry_t, MPI2_POINTER pMpi2Manufacturing5Entry_t; + +typedef struct _MPI2_CONFIG_PAGE_MAN_5 +{ + MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */ + U8 NumPhys; /* 0x04 */ + U8 Reserved1; /* 0x05 */ + U16 Reserved2; /* 0x06 */ + U32 Reserved3; /* 0x08 */ + U32 Reserved4; /* 0x0C */ + MPI2_MANUFACTURING5_ENTRY Phy[MPI2_MAN_PAGE_5_PHY_ENTRIES];/* 0x08 */ +} MPI2_CONFIG_PAGE_MAN_5, + MPI2_POINTER PTR_MPI2_CONFIG_PAGE_MAN_5, + Mpi2ManufacturingPage5_t, MPI2_POINTER pMpi2ManufacturingPage5_t; + +#define MPI2_MANUFACTURING5_PAGEVERSION (0x03) + + +/* Manufacturing Page 6 */ + +typedef struct _MPI2_CONFIG_PAGE_MAN_6 +{ + MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */ + U32 ProductSpecificInfo;/* 0x04 */ +} MPI2_CONFIG_PAGE_MAN_6, + MPI2_POINTER PTR_MPI2_CONFIG_PAGE_MAN_6, + Mpi2ManufacturingPage6_t, MPI2_POINTER pMpi2ManufacturingPage6_t; + +#define MPI2_MANUFACTURING6_PAGEVERSION (0x00) + + +/* Manufacturing Page 7 */ + +typedef struct _MPI2_MANPAGE7_CONNECTOR_INFO +{ + U32 Pinout; /* 0x00 */ + U8 Connector[16]; /* 0x04 */ + U8 Location; /* 0x14 */ + U8 Reserved1; /* 0x15 */ + U16 Slot; /* 0x16 */ + U32 Reserved2; /* 0x18 */ +} MPI2_MANPAGE7_CONNECTOR_INFO, MPI2_POINTER PTR_MPI2_MANPAGE7_CONNECTOR_INFO, + Mpi2ManPage7ConnectorInfo_t, MPI2_POINTER pMpi2ManPage7ConnectorInfo_t; + +/* defines for the Pinout field */ +#define MPI2_MANPAGE7_PINOUT_SFF_8484_L4 (0x00080000) +#define MPI2_MANPAGE7_PINOUT_SFF_8484_L3 (0x00040000) +#define MPI2_MANPAGE7_PINOUT_SFF_8484_L2 (0x00020000) +#define MPI2_MANPAGE7_PINOUT_SFF_8484_L1 (0x00010000) +#define MPI2_MANPAGE7_PINOUT_SFF_8470_L4 (0x00000800) +#define MPI2_MANPAGE7_PINOUT_SFF_8470_L3 (0x00000400) +#define MPI2_MANPAGE7_PINOUT_SFF_8470_L2 (0x00000200) +#define MPI2_MANPAGE7_PINOUT_SFF_8470_L1 (0x00000100) +#define MPI2_MANPAGE7_PINOUT_SFF_8482 (0x00000002) +#define MPI2_MANPAGE7_PINOUT_CONNECTION_UNKNOWN (0x00000001) + +/* defines for the Location field */ +#define MPI2_MANPAGE7_LOCATION_UNKNOWN (0x01) +#define MPI2_MANPAGE7_LOCATION_INTERNAL (0x02) +#define MPI2_MANPAGE7_LOCATION_EXTERNAL (0x04) +#define MPI2_MANPAGE7_LOCATION_SWITCHABLE (0x08) +#define MPI2_MANPAGE7_LOCATION_AUTO (0x10) +#define MPI2_MANPAGE7_LOCATION_NOT_PRESENT (0x20) +#define MPI2_MANPAGE7_LOCATION_NOT_CONNECTED (0x80) + +/* + * Host code (drivers, BIOS, utilities, etc.) should leave this define set to + * one and check NumPhys at runtime. + */ +#ifndef MPI2_MANPAGE7_CONNECTOR_INFO_MAX +#define MPI2_MANPAGE7_CONNECTOR_INFO_MAX (1) +#endif + +typedef struct _MPI2_CONFIG_PAGE_MAN_7 +{ + MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */ + U32 Reserved1; /* 0x04 */ + U32 Reserved2; /* 0x08 */ + U32 Flags; /* 0x0C */ + U8 EnclosureName[16]; /* 0x10 */ + U8 NumPhys; /* 0x20 */ + U8 Reserved3; /* 0x21 */ + U16 Reserved4; /* 0x22 */ + MPI2_MANPAGE7_CONNECTOR_INFO ConnectorInfo[MPI2_MANPAGE7_CONNECTOR_INFO_MAX]; /* 0x24 */ +} MPI2_CONFIG_PAGE_MAN_7, + MPI2_POINTER PTR_MPI2_CONFIG_PAGE_MAN_7, + Mpi2ManufacturingPage7_t, MPI2_POINTER pMpi2ManufacturingPage7_t; + +#define MPI2_MANUFACTURING7_PAGEVERSION (0x00) + +/* defines for the Flags field */ +#define MPI2_MANPAGE7_FLAG_USE_SLOT_INFO (0x00000001) + + +/* + * Generic structure to use for product-specific manufacturing pages + * (currently Manufacturing Page 8 through Manufacturing Page 31). + */ + +typedef struct _MPI2_CONFIG_PAGE_MAN_PS +{ + MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */ + U32 ProductSpecificInfo;/* 0x04 */ +} MPI2_CONFIG_PAGE_MAN_PS, + MPI2_POINTER PTR_MPI2_CONFIG_PAGE_MAN_PS, + Mpi2ManufacturingPagePS_t, MPI2_POINTER pMpi2ManufacturingPagePS_t; + +#define MPI2_MANUFACTURING8_PAGEVERSION (0x00) +#define MPI2_MANUFACTURING9_PAGEVERSION (0x00) +#define MPI2_MANUFACTURING10_PAGEVERSION (0x00) +#define MPI2_MANUFACTURING11_PAGEVERSION (0x00) +#define MPI2_MANUFACTURING12_PAGEVERSION (0x00) +#define MPI2_MANUFACTURING13_PAGEVERSION (0x00) +#define MPI2_MANUFACTURING14_PAGEVERSION (0x00) +#define MPI2_MANUFACTURING15_PAGEVERSION (0x00) +#define MPI2_MANUFACTURING16_PAGEVERSION (0x00) +#define MPI2_MANUFACTURING17_PAGEVERSION (0x00) +#define MPI2_MANUFACTURING18_PAGEVERSION (0x00) +#define MPI2_MANUFACTURING19_PAGEVERSION (0x00) +#define MPI2_MANUFACTURING20_PAGEVERSION (0x00) +#define MPI2_MANUFACTURING21_PAGEVERSION (0x00) +#define MPI2_MANUFACTURING22_PAGEVERSION (0x00) +#define MPI2_MANUFACTURING23_PAGEVERSION (0x00) +#define MPI2_MANUFACTURING24_PAGEVERSION (0x00) +#define MPI2_MANUFACTURING25_PAGEVERSION (0x00) +#define MPI2_MANUFACTURING26_PAGEVERSION (0x00) +#define MPI2_MANUFACTURING27_PAGEVERSION (0x00) +#define MPI2_MANUFACTURING28_PAGEVERSION (0x00) +#define MPI2_MANUFACTURING29_PAGEVERSION (0x00) +#define MPI2_MANUFACTURING30_PAGEVERSION (0x00) +#define MPI2_MANUFACTURING31_PAGEVERSION (0x00) + + +/**************************************************************************** +* IO Unit Config Pages +****************************************************************************/ + +/* IO Unit Page 0 */ + +typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_0 +{ + MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */ + U64 UniqueValue; /* 0x04 */ + MPI2_VERSION_UNION NvdataVersionDefault; /* 0x08 */ + MPI2_VERSION_UNION NvdataVersionPersistent; /* 0x0A */ +} MPI2_CONFIG_PAGE_IO_UNIT_0, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_IO_UNIT_0, + Mpi2IOUnitPage0_t, MPI2_POINTER pMpi2IOUnitPage0_t; + +#define MPI2_IOUNITPAGE0_PAGEVERSION (0x02) + + +/* IO Unit Page 1 */ + +typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_1 +{ + MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */ + U32 Flags; /* 0x04 */ +} MPI2_CONFIG_PAGE_IO_UNIT_1, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_IO_UNIT_1, + Mpi2IOUnitPage1_t, MPI2_POINTER pMpi2IOUnitPage1_t; + +#define MPI2_IOUNITPAGE1_PAGEVERSION (0x04) + +/* IO Unit Page 1 Flags defines */ +#define MPI2_IOUNITPAGE1_MASK_SATA_WRITE_CACHE (0x00000600) +#define MPI2_IOUNITPAGE1_ENABLE_SATA_WRITE_CACHE (0x00000000) +#define MPI2_IOUNITPAGE1_DISABLE_SATA_WRITE_CACHE (0x00000200) +#define MPI2_IOUNITPAGE1_UNCHANGED_SATA_WRITE_CACHE (0x00000400) +#define MPI2_IOUNITPAGE1_NATIVE_COMMAND_Q_DISABLE (0x00000100) +#define MPI2_IOUNITPAGE1_DISABLE_IR (0x00000040) +#define MPI2_IOUNITPAGE1_DISABLE_TASK_SET_FULL_HANDLING (0x00000020) +#define MPI2_IOUNITPAGE1_IR_USE_STATIC_VOLUME_ID (0x00000004) +#define MPI2_IOUNITPAGE1_MULTI_PATHING (0x00000002) +#define MPI2_IOUNITPAGE1_SINGLE_PATHING (0x00000000) + + +/* IO Unit Page 3 */ + +/* + * Host code (drivers, BIOS, utilities, etc.) should leave this define set to + * one and check Header.PageLength at runtime. + */ +#ifndef MPI2_IO_UNIT_PAGE_3_GPIO_VAL_MAX +#define MPI2_IO_UNIT_PAGE_3_GPIO_VAL_MAX (1) +#endif + +typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_3 +{ + MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */ + U8 GPIOCount; /* 0x04 */ + U8 Reserved1; /* 0x05 */ + U16 Reserved2; /* 0x06 */ + U16 GPIOVal[MPI2_IO_UNIT_PAGE_3_GPIO_VAL_MAX];/* 0x08 */ +} MPI2_CONFIG_PAGE_IO_UNIT_3, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_IO_UNIT_3, + Mpi2IOUnitPage3_t, MPI2_POINTER pMpi2IOUnitPage3_t; + +#define MPI2_IOUNITPAGE3_PAGEVERSION (0x01) + +/* defines for IO Unit Page 3 GPIOVal field */ +#define MPI2_IOUNITPAGE3_GPIO_FUNCTION_MASK (0xFFFC) +#define MPI2_IOUNITPAGE3_GPIO_FUNCTION_SHIFT (2) +#define MPI2_IOUNITPAGE3_GPIO_SETTING_OFF (0x0000) +#define MPI2_IOUNITPAGE3_GPIO_SETTING_ON (0x0001) + + +/**************************************************************************** +* IOC Config Pages +****************************************************************************/ + +/* IOC Page 0 */ + +typedef struct _MPI2_CONFIG_PAGE_IOC_0 +{ + MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */ + U32 Reserved1; /* 0x04 */ + U32 Reserved2; /* 0x08 */ + U16 VendorID; /* 0x0C */ + U16 DeviceID; /* 0x0E */ + U8 RevisionID; /* 0x10 */ + U8 Reserved3; /* 0x11 */ + U16 Reserved4; /* 0x12 */ + U32 ClassCode; /* 0x14 */ + U16 SubsystemVendorID; /* 0x18 */ + U16 SubsystemID; /* 0x1A */ +} MPI2_CONFIG_PAGE_IOC_0, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_IOC_0, + Mpi2IOCPage0_t, MPI2_POINTER pMpi2IOCPage0_t; + +#define MPI2_IOCPAGE0_PAGEVERSION (0x02) + + +/* IOC Page 1 */ + +typedef struct _MPI2_CONFIG_PAGE_IOC_1 +{ + MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */ + U32 Flags; /* 0x04 */ + U32 CoalescingTimeout; /* 0x08 */ + U8 CoalescingDepth; /* 0x0C */ + U8 PCISlotNum; /* 0x0D */ + U8 PCIBusNum; /* 0x0E */ + U8 PCIDomainSegment; /* 0x0F */ + U32 Reserved1; /* 0x10 */ + U32 Reserved2; /* 0x14 */ +} MPI2_CONFIG_PAGE_IOC_1, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_IOC_1, + Mpi2IOCPage1_t, MPI2_POINTER pMpi2IOCPage1_t; + +#define MPI2_IOCPAGE1_PAGEVERSION (0x05) + +/* defines for IOC Page 1 Flags field */ +#define MPI2_IOCPAGE1_REPLY_COALESCING (0x00000001) + +#define MPI2_IOCPAGE1_PCISLOTNUM_UNKNOWN (0xFF) +#define MPI2_IOCPAGE1_PCIBUSNUM_UNKNOWN (0xFF) +#define MPI2_IOCPAGE1_PCIDOMAIN_UNKNOWN (0xFF) + +/* IOC Page 6 */ + +typedef struct _MPI2_CONFIG_PAGE_IOC_6 +{ + MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */ + U32 CapabilitiesFlags; /* 0x04 */ + U8 MaxDrivesRAID0; /* 0x08 */ + U8 MaxDrivesRAID1; /* 0x09 */ + U8 MaxDrivesRAID1E; /* 0x0A */ + U8 MaxDrivesRAID10; /* 0x0B */ + U8 MinDrivesRAID0; /* 0x0C */ + U8 MinDrivesRAID1; /* 0x0D */ + U8 MinDrivesRAID1E; /* 0x0E */ + U8 MinDrivesRAID10; /* 0x0F */ + U32 Reserved1; /* 0x10 */ + U8 MaxGlobalHotSpares; /* 0x14 */ + U8 MaxPhysDisks; /* 0x15 */ + U8 MaxVolumes; /* 0x16 */ + U8 MaxConfigs; /* 0x17 */ + U8 MaxOCEDisks; /* 0x18 */ + U8 Reserved2; /* 0x19 */ + U16 Reserved3; /* 0x1A */ + U32 SupportedStripeSizeMapRAID0; /* 0x1C */ + U32 SupportedStripeSizeMapRAID1E; /* 0x20 */ + U32 SupportedStripeSizeMapRAID10; /* 0x24 */ + U32 Reserved4; /* 0x28 */ + U32 Reserved5; /* 0x2C */ + U16 DefaultMetadataSize; /* 0x30 */ + U16 Reserved6; /* 0x32 */ + U16 MaxBadBlockTableEntries; /* 0x34 */ + U16 Reserved7; /* 0x36 */ + U32 IRNvsramVersion; /* 0x38 */ +} MPI2_CONFIG_PAGE_IOC_6, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_IOC_6, + Mpi2IOCPage6_t, MPI2_POINTER pMpi2IOCPage6_t; + +#define MPI2_IOCPAGE6_PAGEVERSION (0x04) + +/* defines for IOC Page 6 CapabilitiesFlags */ +#define MPI2_IOCPAGE6_CAP_FLAGS_RAID10_SUPPORT (0x00000010) +#define MPI2_IOCPAGE6_CAP_FLAGS_RAID1_SUPPORT (0x00000008) +#define MPI2_IOCPAGE6_CAP_FLAGS_RAID1E_SUPPORT (0x00000004) +#define MPI2_IOCPAGE6_CAP_FLAGS_RAID0_SUPPORT (0x00000002) +#define MPI2_IOCPAGE6_CAP_FLAGS_GLOBAL_HOT_SPARE (0x00000001) + + +/* IOC Page 7 */ + +#define MPI2_IOCPAGE7_EVENTMASK_WORDS (4) + +typedef struct _MPI2_CONFIG_PAGE_IOC_7 +{ + MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */ + U32 Reserved1; /* 0x04 */ + U32 EventMasks[MPI2_IOCPAGE7_EVENTMASK_WORDS];/* 0x08 */ + U16 SASBroadcastPrimitiveMasks; /* 0x18 */ + U16 Reserved2; /* 0x1A */ + U32 Reserved3; /* 0x1C */ +} MPI2_CONFIG_PAGE_IOC_7, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_IOC_7, + Mpi2IOCPage7_t, MPI2_POINTER pMpi2IOCPage7_t; + +#define MPI2_IOCPAGE7_PAGEVERSION (0x01) + + +/* IOC Page 8 */ + +typedef struct _MPI2_CONFIG_PAGE_IOC_8 +{ + MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */ + U8 NumDevsPerEnclosure; /* 0x04 */ + U8 Reserved1; /* 0x05 */ + U16 Reserved2; /* 0x06 */ + U16 MaxPersistentEntries; /* 0x08 */ + U16 MaxNumPhysicalMappedIDs; /* 0x0A */ + U16 Flags; /* 0x0C */ + U16 Reserved3; /* 0x0E */ + U16 IRVolumeMappingFlags; /* 0x10 */ + U16 Reserved4; /* 0x12 */ + U32 Reserved5; /* 0x14 */ +} MPI2_CONFIG_PAGE_IOC_8, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_IOC_8, + Mpi2IOCPage8_t, MPI2_POINTER pMpi2IOCPage8_t; + +#define MPI2_IOCPAGE8_PAGEVERSION (0x00) + +/* defines for IOC Page 8 Flags field */ +#define MPI2_IOCPAGE8_FLAGS_DA_START_SLOT_1 (0x00000020) +#define MPI2_IOCPAGE8_FLAGS_RESERVED_TARGETID_0 (0x00000010) + +#define MPI2_IOCPAGE8_FLAGS_MASK_MAPPING_MODE (0x0000000E) +#define MPI2_IOCPAGE8_FLAGS_DEVICE_PERSISTENCE_MAPPING (0x00000000) +#define MPI2_IOCPAGE8_FLAGS_ENCLOSURE_SLOT_MAPPING (0x00000002) + +#define MPI2_IOCPAGE8_FLAGS_DISABLE_PERSISTENT_MAPPING (0x00000001) +#define MPI2_IOCPAGE8_FLAGS_ENABLE_PERSISTENT_MAPPING (0x00000000) + +/* defines for IOC Page 8 IRVolumeMappingFlags */ +#define MPI2_IOCPAGE8_IRFLAGS_MASK_VOLUME_MAPPING_MODE (0x00000003) +#define MPI2_IOCPAGE8_IRFLAGS_LOW_VOLUME_MAPPING (0x00000000) +#define MPI2_IOCPAGE8_IRFLAGS_HIGH_VOLUME_MAPPING (0x00000001) + + +/**************************************************************************** +* BIOS Config Pages +****************************************************************************/ + +/* BIOS Page 1 */ + +typedef struct _MPI2_CONFIG_PAGE_BIOS_1 +{ + MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */ + U32 BiosOptions; /* 0x04 */ + U32 IOCSettings; /* 0x08 */ + U32 Reserved1; /* 0x0C */ + U32 DeviceSettings; /* 0x10 */ + U16 NumberOfDevices; /* 0x14 */ + U16 Reserved2; /* 0x16 */ + U16 IOTimeoutBlockDevicesNonRM; /* 0x18 */ + U16 IOTimeoutSequential; /* 0x1A */ + U16 IOTimeoutOther; /* 0x1C */ + U16 IOTimeoutBlockDevicesRM; /* 0x1E */ +} MPI2_CONFIG_PAGE_BIOS_1, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_BIOS_1, + Mpi2BiosPage1_t, MPI2_POINTER pMpi2BiosPage1_t; + +#define MPI2_BIOSPAGE1_PAGEVERSION (0x04) + +/* values for BIOS Page 1 BiosOptions field */ +#define MPI2_BIOSPAGE1_OPTIONS_DISABLE_BIOS (0x00000001) + +/* values for BIOS Page 1 IOCSettings field */ +#define MPI2_BIOSPAGE1_IOCSET_MASK_BOOT_PREFERENCE (0x00030000) +#define MPI2_BIOSPAGE1_IOCSET_ENCLOSURE_SLOT_BOOT (0x00000000) +#define MPI2_BIOSPAGE1_IOCSET_SAS_ADDRESS_BOOT (0x00010000) + +#define MPI2_BIOSPAGE1_IOCSET_MASK_RM_SETTING (0x000000C0) +#define MPI2_BIOSPAGE1_IOCSET_NONE_RM_SETTING (0x00000000) +#define MPI2_BIOSPAGE1_IOCSET_BOOT_RM_SETTING (0x00000040) +#define MPI2_BIOSPAGE1_IOCSET_MEDIA_RM_SETTING (0x00000080) + +#define MPI2_BIOSPAGE1_IOCSET_MASK_ADAPTER_SUPPORT (0x00000030) +#define MPI2_BIOSPAGE1_IOCSET_NO_SUPPORT (0x00000000) +#define MPI2_BIOSPAGE1_IOCSET_BIOS_SUPPORT (0x00000010) +#define MPI2_BIOSPAGE1_IOCSET_OS_SUPPORT (0x00000020) +#define MPI2_BIOSPAGE1_IOCSET_ALL_SUPPORT (0x00000030) + +#define MPI2_BIOSPAGE1_IOCSET_ALTERNATE_CHS (0x00000008) + +/* values for BIOS Page 1 DeviceSettings field */ +#define MPI2_BIOSPAGE1_DEVSET_DISABLE_SMART_POLLING (0x00000010) +#define MPI2_BIOSPAGE1_DEVSET_DISABLE_SEQ_LUN (0x00000008) +#define MPI2_BIOSPAGE1_DEVSET_DISABLE_RM_LUN (0x00000004) +#define MPI2_BIOSPAGE1_DEVSET_DISABLE_NON_RM_LUN (0x00000002) +#define MPI2_BIOSPAGE1_DEVSET_DISABLE_OTHER_LUN (0x00000001) + + +/* BIOS Page 2 */ + +typedef struct _MPI2_BOOT_DEVICE_ADAPTER_ORDER +{ + U32 Reserved1; /* 0x00 */ + U32 Reserved2; /* 0x04 */ + U32 Reserved3; /* 0x08 */ + U32 Reserved4; /* 0x0C */ + U32 Reserved5; /* 0x10 */ + U32 Reserved6; /* 0x14 */ +} MPI2_BOOT_DEVICE_ADAPTER_ORDER, + MPI2_POINTER PTR_MPI2_BOOT_DEVICE_ADAPTER_ORDER, + Mpi2BootDeviceAdapterOrder_t, MPI2_POINTER pMpi2BootDeviceAdapterOrder_t; + +typedef struct _MPI2_BOOT_DEVICE_SAS_WWID +{ + U64 SASAddress; /* 0x00 */ + U8 LUN[8]; /* 0x08 */ + U32 Reserved1; /* 0x10 */ + U32 Reserved2; /* 0x14 */ +} MPI2_BOOT_DEVICE_SAS_WWID, MPI2_POINTER PTR_MPI2_BOOT_DEVICE_SAS_WWID, + Mpi2BootDeviceSasWwid_t, MPI2_POINTER pMpi2BootDeviceSasWwid_t; + +typedef struct _MPI2_BOOT_DEVICE_ENCLOSURE_SLOT +{ + U64 EnclosureLogicalID; /* 0x00 */ + U32 Reserved1; /* 0x08 */ + U32 Reserved2; /* 0x0C */ + U16 SlotNumber; /* 0x10 */ + U16 Reserved3; /* 0x12 */ + U32 Reserved4; /* 0x14 */ +} MPI2_BOOT_DEVICE_ENCLOSURE_SLOT, + MPI2_POINTER PTR_MPI2_BOOT_DEVICE_ENCLOSURE_SLOT, + Mpi2BootDeviceEnclosureSlot_t, MPI2_POINTER pMpi2BootDeviceEnclosureSlot_t; + +typedef struct _MPI2_BOOT_DEVICE_DEVICE_NAME +{ + U64 DeviceName; /* 0x00 */ + U8 LUN[8]; /* 0x08 */ + U32 Reserved1; /* 0x10 */ + U32 Reserved2; /* 0x14 */ +} MPI2_BOOT_DEVICE_DEVICE_NAME, MPI2_POINTER PTR_MPI2_BOOT_DEVICE_DEVICE_NAME, + Mpi2BootDeviceDeviceName_t, MPI2_POINTER pMpi2BootDeviceDeviceName_t; + +typedef union _MPI2_MPI2_BIOSPAGE2_BOOT_DEVICE +{ + MPI2_BOOT_DEVICE_ADAPTER_ORDER AdapterOrder; + MPI2_BOOT_DEVICE_SAS_WWID SasWwid; + MPI2_BOOT_DEVICE_ENCLOSURE_SLOT EnclosureSlot; + MPI2_BOOT_DEVICE_DEVICE_NAME DeviceName; +} MPI2_BIOSPAGE2_BOOT_DEVICE, MPI2_POINTER PTR_MPI2_BIOSPAGE2_BOOT_DEVICE, + Mpi2BiosPage2BootDevice_t, MPI2_POINTER pMpi2BiosPage2BootDevice_t; + +typedef struct _MPI2_CONFIG_PAGE_BIOS_2 +{ + MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */ + U32 Reserved1; /* 0x04 */ + U32 Reserved2; /* 0x08 */ + U32 Reserved3; /* 0x0C */ + U32 Reserved4; /* 0x10 */ + U32 Reserved5; /* 0x14 */ + U32 Reserved6; /* 0x18 */ + U8 ReqBootDeviceForm; /* 0x1C */ + U8 Reserved7; /* 0x1D */ + U16 Reserved8; /* 0x1E */ + MPI2_BIOSPAGE2_BOOT_DEVICE RequestedBootDevice; /* 0x20 */ + U8 ReqAltBootDeviceForm; /* 0x38 */ + U8 Reserved9; /* 0x39 */ + U16 Reserved10; /* 0x3A */ + MPI2_BIOSPAGE2_BOOT_DEVICE RequestedAltBootDevice; /* 0x3C */ + U8 CurrentBootDeviceForm; /* 0x58 */ + U8 Reserved11; /* 0x59 */ + U16 Reserved12; /* 0x5A */ + MPI2_BIOSPAGE2_BOOT_DEVICE CurrentBootDevice; /* 0x58 */ +} MPI2_CONFIG_PAGE_BIOS_2, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_BIOS_2, + Mpi2BiosPage2_t, MPI2_POINTER pMpi2BiosPage2_t; + +#define MPI2_BIOSPAGE2_PAGEVERSION (0x04) + +/* values for BIOS Page 2 BootDeviceForm fields */ +#define MPI2_BIOSPAGE2_FORM_MASK (0x0F) +#define MPI2_BIOSPAGE2_FORM_NO_DEVICE_SPECIFIED (0x00) +#define MPI2_BIOSPAGE2_FORM_SAS_WWID (0x05) +#define MPI2_BIOSPAGE2_FORM_ENCLOSURE_SLOT (0x06) +#define MPI2_BIOSPAGE2_FORM_DEVICE_NAME (0x07) + + +/* BIOS Page 3 */ + +typedef struct _MPI2_ADAPTER_INFO +{ + U8 PciBusNumber; /* 0x00 */ + U8 PciDeviceAndFunctionNumber; /* 0x01 */ + U16 AdapterFlags; /* 0x02 */ +} MPI2_ADAPTER_INFO, MPI2_POINTER PTR_MPI2_ADAPTER_INFO, + Mpi2AdapterInfo_t, MPI2_POINTER pMpi2AdapterInfo_t; + +#define MPI2_ADAPTER_INFO_FLAGS_EMBEDDED (0x0001) +#define MPI2_ADAPTER_INFO_FLAGS_INIT_STATUS (0x0002) + +typedef struct _MPI2_CONFIG_PAGE_BIOS_3 +{ + MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */ + U32 GlobalFlags; /* 0x04 */ + U32 BiosVersion; /* 0x08 */ + MPI2_ADAPTER_INFO AdapterOrder[4]; /* 0x0C */ + U32 Reserved1; /* 0x1C */ +} MPI2_CONFIG_PAGE_BIOS_3, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_BIOS_3, + Mpi2BiosPage3_t, MPI2_POINTER pMpi2BiosPage3_t; + +#define MPI2_BIOSPAGE3_PAGEVERSION (0x00) + +/* values for BIOS Page 3 GlobalFlags */ +#define MPI2_BIOSPAGE3_FLAGS_PAUSE_ON_ERROR (0x00000002) +#define MPI2_BIOSPAGE3_FLAGS_VERBOSE_ENABLE (0x00000004) +#define MPI2_BIOSPAGE3_FLAGS_HOOK_INT_40_DISABLE (0x00000010) + +#define MPI2_BIOSPAGE3_FLAGS_DEV_LIST_DISPLAY_MASK (0x000000E0) +#define MPI2_BIOSPAGE3_FLAGS_INSTALLED_DEV_DISPLAY (0x00000000) +#define MPI2_BIOSPAGE3_FLAGS_ADAPTER_DISPLAY (0x00000020) +#define MPI2_BIOSPAGE3_FLAGS_ADAPTER_DEV_DISPLAY (0x00000040) + + +/* BIOS Page 4 */ + +/* + * Host code (drivers, BIOS, utilities, etc.) should leave this define set to + * one and check Header.PageLength or NumPhys at runtime. + */ +#ifndef MPI2_BIOS_PAGE_4_PHY_ENTRIES +#define MPI2_BIOS_PAGE_4_PHY_ENTRIES (1) +#endif + +typedef struct _MPI2_BIOS4_ENTRY +{ + U64 ReassignmentWWID; /* 0x00 */ + U64 ReassignmentDeviceName; /* 0x08 */ +} MPI2_BIOS4_ENTRY, MPI2_POINTER PTR_MPI2_BIOS4_ENTRY, + Mpi2MBios4Entry_t, MPI2_POINTER pMpi2Bios4Entry_t; + +typedef struct _MPI2_CONFIG_PAGE_BIOS_4 +{ + MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */ + U8 NumPhys; /* 0x04 */ + U8 Reserved1; /* 0x05 */ + U16 Reserved2; /* 0x06 */ + MPI2_BIOS4_ENTRY Phy[MPI2_BIOS_PAGE_4_PHY_ENTRIES]; /* 0x08 */ +} MPI2_CONFIG_PAGE_BIOS_4, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_BIOS_4, + Mpi2BiosPage4_t, MPI2_POINTER pMpi2BiosPage4_t; + +#define MPI2_BIOSPAGE4_PAGEVERSION (0x01) + + +/**************************************************************************** +* RAID Volume Config Pages +****************************************************************************/ + +/* RAID Volume Page 0 */ + +typedef struct _MPI2_RAIDVOL0_PHYS_DISK +{ + U8 RAIDSetNum; /* 0x00 */ + U8 PhysDiskMap; /* 0x01 */ + U8 PhysDiskNum; /* 0x02 */ + U8 Reserved; /* 0x03 */ +} MPI2_RAIDVOL0_PHYS_DISK, MPI2_POINTER PTR_MPI2_RAIDVOL0_PHYS_DISK, + Mpi2RaidVol0PhysDisk_t, MPI2_POINTER pMpi2RaidVol0PhysDisk_t; + +/* defines for the PhysDiskMap field */ +#define MPI2_RAIDVOL0_PHYSDISK_PRIMARY (0x01) +#define MPI2_RAIDVOL0_PHYSDISK_SECONDARY (0x02) + +typedef struct _MPI2_RAIDVOL0_SETTINGS +{ + U16 Settings; /* 0x00 */ + U8 HotSparePool; /* 0x01 */ + U8 Reserved; /* 0x02 */ +} MPI2_RAIDVOL0_SETTINGS, MPI2_POINTER PTR_MPI2_RAIDVOL0_SETTINGS, + Mpi2RaidVol0Settings_t, MPI2_POINTER pMpi2RaidVol0Settings_t; + +/* RAID Volume Page 0 HotSparePool defines, also used in RAID Physical Disk */ +#define MPI2_RAID_HOT_SPARE_POOL_0 (0x01) +#define MPI2_RAID_HOT_SPARE_POOL_1 (0x02) +#define MPI2_RAID_HOT_SPARE_POOL_2 (0x04) +#define MPI2_RAID_HOT_SPARE_POOL_3 (0x08) +#define MPI2_RAID_HOT_SPARE_POOL_4 (0x10) +#define MPI2_RAID_HOT_SPARE_POOL_5 (0x20) +#define MPI2_RAID_HOT_SPARE_POOL_6 (0x40) +#define MPI2_RAID_HOT_SPARE_POOL_7 (0x80) + +/* RAID Volume Page 0 VolumeSettings defines */ +#define MPI2_RAIDVOL0_SETTING_USE_PRODUCT_ID_SUFFIX (0x0008) +#define MPI2_RAIDVOL0_SETTING_AUTO_CONFIG_HSWAP_DISABLE (0x0004) + +#define MPI2_RAIDVOL0_SETTING_MASK_WRITE_CACHING (0x0003) +#define MPI2_RAIDVOL0_SETTING_UNCHANGED (0x0000) +#define MPI2_RAIDVOL0_SETTING_DISABLE_WRITE_CACHING (0x0001) +#define MPI2_RAIDVOL0_SETTING_ENABLE_WRITE_CACHING (0x0002) + +/* + * Host code (drivers, BIOS, utilities, etc.) should leave this define set to + * one and check Header.PageLength at runtime. + */ +#ifndef MPI2_RAID_VOL_PAGE_0_PHYSDISK_MAX +#define MPI2_RAID_VOL_PAGE_0_PHYSDISK_MAX (1) +#endif + +typedef struct _MPI2_CONFIG_PAGE_RAID_VOL_0 +{ + MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */ + U16 DevHandle; /* 0x04 */ + U8 VolumeState; /* 0x06 */ + U8 VolumeType; /* 0x07 */ + U32 VolumeStatusFlags; /* 0x08 */ + MPI2_RAIDVOL0_SETTINGS VolumeSettings; /* 0x0C */ + U64 MaxLBA; /* 0x10 */ + U32 StripeSize; /* 0x18 */ + U16 BlockSize; /* 0x1C */ + U16 Reserved1; /* 0x1E */ + U8 SupportedPhysDisks; /* 0x20 */ + U8 ResyncRate; /* 0x21 */ + U16 DataScrubDuration; /* 0x22 */ + U8 NumPhysDisks; /* 0x24 */ + U8 Reserved2; /* 0x25 */ + U8 Reserved3; /* 0x26 */ + U8 InactiveStatus; /* 0x27 */ + MPI2_RAIDVOL0_PHYS_DISK PhysDisk[MPI2_RAID_VOL_PAGE_0_PHYSDISK_MAX]; /* 0x28 */ +} MPI2_CONFIG_PAGE_RAID_VOL_0, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_RAID_VOL_0, + Mpi2RaidVolPage0_t, MPI2_POINTER pMpi2RaidVolPage0_t; + +#define MPI2_RAIDVOLPAGE0_PAGEVERSION (0x0A) + +/* values for RAID VolumeState */ +#define MPI2_RAID_VOL_STATE_MISSING (0x00) +#define MPI2_RAID_VOL_STATE_FAILED (0x01) +#define MPI2_RAID_VOL_STATE_INITIALIZING (0x02) +#define MPI2_RAID_VOL_STATE_ONLINE (0x03) +#define MPI2_RAID_VOL_STATE_DEGRADED (0x04) +#define MPI2_RAID_VOL_STATE_OPTIMAL (0x05) + +/* values for RAID VolumeType */ +#define MPI2_RAID_VOL_TYPE_RAID0 (0x00) +#define MPI2_RAID_VOL_TYPE_RAID1E (0x01) +#define MPI2_RAID_VOL_TYPE_RAID1 (0x02) +#define MPI2_RAID_VOL_TYPE_RAID10 (0x05) +#define MPI2_RAID_VOL_TYPE_UNKNOWN (0xFF) + +/* values for RAID Volume Page 0 VolumeStatusFlags field */ +#define MPI2_RAIDVOL0_STATUS_FLAG_PENDING_RESYNC (0x02000000) +#define MPI2_RAIDVOL0_STATUS_FLAG_BACKG_INIT_PENDING (0x01000000) +#define MPI2_RAIDVOL0_STATUS_FLAG_MDC_PENDING (0x00800000) +#define MPI2_RAIDVOL0_STATUS_FLAG_USER_CONSIST_PENDING (0x00400000) +#define MPI2_RAIDVOL0_STATUS_FLAG_MAKE_DATA_CONSISTENT (0x00200000) +#define MPI2_RAIDVOL0_STATUS_FLAG_DATA_SCRUB (0x00100000) +#define MPI2_RAIDVOL0_STATUS_FLAG_CONSISTENCY_CHECK (0x00080000) +#define MPI2_RAIDVOL0_STATUS_FLAG_CAPACITY_EXPANSION (0x00040000) +#define MPI2_RAIDVOL0_STATUS_FLAG_BACKGROUND_INIT (0x00020000) +#define MPI2_RAIDVOL0_STATUS_FLAG_RESYNC_IN_PROGRESS (0x00010000) +#define MPI2_RAIDVOL0_STATUS_FLAG_OCE_ALLOWED (0x00000040) +#define MPI2_RAIDVOL0_STATUS_FLAG_BGI_COMPLETE (0x00000020) +#define MPI2_RAIDVOL0_STATUS_FLAG_1E_OFFSET_MIRROR (0x00000000) +#define MPI2_RAIDVOL0_STATUS_FLAG_1E_ADJACENT_MIRROR (0x00000010) +#define MPI2_RAIDVOL0_STATUS_FLAG_BAD_BLOCK_TABLE_FULL (0x00000008) +#define MPI2_RAIDVOL0_STATUS_FLAG_VOLUME_INACTIVE (0x00000004) +#define MPI2_RAIDVOL0_STATUS_FLAG_QUIESCED (0x00000002) +#define MPI2_RAIDVOL0_STATUS_FLAG_ENABLED (0x00000001) + +/* values for RAID Volume Page 0 SupportedPhysDisks field */ +#define MPI2_RAIDVOL0_SUPPORT_SOLID_STATE_DISKS (0x08) +#define MPI2_RAIDVOL0_SUPPORT_HARD_DISKS (0x04) +#define MPI2_RAIDVOL0_SUPPORT_SAS_PROTOCOL (0x02) +#define MPI2_RAIDVOL0_SUPPORT_SATA_PROTOCOL (0x01) + +/* values for RAID Volume Page 0 InactiveStatus field */ +#define MPI2_RAIDVOLPAGE0_UNKNOWN_INACTIVE (0x00) +#define MPI2_RAIDVOLPAGE0_STALE_METADATA_INACTIVE (0x01) +#define MPI2_RAIDVOLPAGE0_FOREIGN_VOLUME_INACTIVE (0x02) +#define MPI2_RAIDVOLPAGE0_INSUFFICIENT_RESOURCE_INACTIVE (0x03) +#define MPI2_RAIDVOLPAGE0_CLONE_VOLUME_INACTIVE (0x04) +#define MPI2_RAIDVOLPAGE0_INSUFFICIENT_METADATA_INACTIVE (0x05) +#define MPI2_RAIDVOLPAGE0_PREVIOUSLY_DELETED (0x06) + + +/* RAID Volume Page 1 */ + +typedef struct _MPI2_CONFIG_PAGE_RAID_VOL_1 +{ + MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */ + U16 DevHandle; /* 0x04 */ + U16 Reserved0; /* 0x06 */ + U8 GUID[24]; /* 0x08 */ + U8 Name[16]; /* 0x20 */ + U64 WWID; /* 0x30 */ + U32 Reserved1; /* 0x38 */ + U32 Reserved2; /* 0x3C */ +} MPI2_CONFIG_PAGE_RAID_VOL_1, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_RAID_VOL_1, + Mpi2RaidVolPage1_t, MPI2_POINTER pMpi2RaidVolPage1_t; + +#define MPI2_RAIDVOLPAGE1_PAGEVERSION (0x03) + + +/**************************************************************************** +* RAID Physical Disk Config Pages +****************************************************************************/ + +/* RAID Physical Disk Page 0 */ + +typedef struct _MPI2_RAIDPHYSDISK0_SETTINGS +{ + U16 Reserved1; /* 0x00 */ + U8 HotSparePool; /* 0x02 */ + U8 Reserved2; /* 0x03 */ +} MPI2_RAIDPHYSDISK0_SETTINGS, MPI2_POINTER PTR_MPI2_RAIDPHYSDISK0_SETTINGS, + Mpi2RaidPhysDisk0Settings_t, MPI2_POINTER pMpi2RaidPhysDisk0Settings_t; + +/* use MPI2_RAID_HOT_SPARE_POOL_ defines for the HotSparePool field */ + +typedef struct _MPI2_RAIDPHYSDISK0_INQUIRY_DATA +{ + U8 VendorID[8]; /* 0x00 */ + U8 ProductID[16]; /* 0x08 */ + U8 ProductRevLevel[4]; /* 0x18 */ + U8 SerialNum[32]; /* 0x1C */ +} MPI2_RAIDPHYSDISK0_INQUIRY_DATA, + MPI2_POINTER PTR_MPI2_RAIDPHYSDISK0_INQUIRY_DATA, + Mpi2RaidPhysDisk0InquiryData_t, MPI2_POINTER pMpi2RaidPhysDisk0InquiryData_t; + +typedef struct _MPI2_CONFIG_PAGE_RD_PDISK_0 +{ + MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */ + U16 DevHandle; /* 0x04 */ + U8 Reserved1; /* 0x06 */ + U8 PhysDiskNum; /* 0x07 */ + MPI2_RAIDPHYSDISK0_SETTINGS PhysDiskSettings; /* 0x08 */ + U32 Reserved2; /* 0x0C */ + MPI2_RAIDPHYSDISK0_INQUIRY_DATA InquiryData; /* 0x10 */ + U32 Reserved3; /* 0x4C */ + U8 PhysDiskState; /* 0x50 */ + U8 OfflineReason; /* 0x51 */ + U8 IncompatibleReason; /* 0x52 */ + U8 PhysDiskAttributes; /* 0x53 */ + U32 PhysDiskStatusFlags; /* 0x54 */ + U64 DeviceMaxLBA; /* 0x58 */ + U64 HostMaxLBA; /* 0x60 */ + U64 CoercedMaxLBA; /* 0x68 */ + U16 BlockSize; /* 0x70 */ + U16 Reserved5; /* 0x72 */ + U32 Reserved6; /* 0x74 */ +} MPI2_CONFIG_PAGE_RD_PDISK_0, + MPI2_POINTER PTR_MPI2_CONFIG_PAGE_RD_PDISK_0, + Mpi2RaidPhysDiskPage0_t, MPI2_POINTER pMpi2RaidPhysDiskPage0_t; + +#define MPI2_RAIDPHYSDISKPAGE0_PAGEVERSION (0x05) + +/* PhysDiskState defines */ +#define MPI2_RAID_PD_STATE_NOT_CONFIGURED (0x00) +#define MPI2_RAID_PD_STATE_NOT_COMPATIBLE (0x01) +#define MPI2_RAID_PD_STATE_OFFLINE (0x02) +#define MPI2_RAID_PD_STATE_ONLINE (0x03) +#define MPI2_RAID_PD_STATE_HOT_SPARE (0x04) +#define MPI2_RAID_PD_STATE_DEGRADED (0x05) +#define MPI2_RAID_PD_STATE_REBUILDING (0x06) +#define MPI2_RAID_PD_STATE_OPTIMAL (0x07) + +/* OfflineReason defines */ +#define MPI2_PHYSDISK0_ONLINE (0x00) +#define MPI2_PHYSDISK0_OFFLINE_MISSING (0x01) +#define MPI2_PHYSDISK0_OFFLINE_FAILED (0x03) +#define MPI2_PHYSDISK0_OFFLINE_INITIALIZING (0x04) +#define MPI2_PHYSDISK0_OFFLINE_REQUESTED (0x05) +#define MPI2_PHYSDISK0_OFFLINE_FAILED_REQUESTED (0x06) +#define MPI2_PHYSDISK0_OFFLINE_OTHER (0xFF) + +/* IncompatibleReason defines */ +#define MPI2_PHYSDISK0_COMPATIBLE (0x00) +#define MPI2_PHYSDISK0_INCOMPATIBLE_PROTOCOL (0x01) +#define MPI2_PHYSDISK0_INCOMPATIBLE_BLOCKSIZE (0x02) +#define MPI2_PHYSDISK0_INCOMPATIBLE_MAX_LBA (0x03) +#define MPI2_PHYSDISK0_INCOMPATIBLE_SATA_EXTENDED_CMD (0x04) +#define MPI2_PHYSDISK0_INCOMPATIBLE_REMOVEABLE_MEDIA (0x05) +#define MPI2_PHYSDISK0_INCOMPATIBLE_UNKNOWN (0xFF) + +/* PhysDiskAttributes defines */ +#define MPI2_PHYSDISK0_ATTRIB_SOLID_STATE_DRIVE (0x08) +#define MPI2_PHYSDISK0_ATTRIB_HARD_DISK_DRIVE (0x04) +#define MPI2_PHYSDISK0_ATTRIB_SAS_PROTOCOL (0x02) +#define MPI2_PHYSDISK0_ATTRIB_SATA_PROTOCOL (0x01) + +/* PhysDiskStatusFlags defines */ +#define MPI2_PHYSDISK0_STATUS_FLAG_NOT_CERTIFIED (0x00000040) +#define MPI2_PHYSDISK0_STATUS_FLAG_OCE_TARGET (0x00000020) +#define MPI2_PHYSDISK0_STATUS_FLAG_WRITE_CACHE_ENABLED (0x00000010) +#define MPI2_PHYSDISK0_STATUS_FLAG_OPTIMAL_PREVIOUS (0x00000000) +#define MPI2_PHYSDISK0_STATUS_FLAG_NOT_OPTIMAL_PREVIOUS (0x00000008) +#define MPI2_PHYSDISK0_STATUS_FLAG_INACTIVE_VOLUME (0x00000004) +#define MPI2_PHYSDISK0_STATUS_FLAG_QUIESCED (0x00000002) +#define MPI2_PHYSDISK0_STATUS_FLAG_OUT_OF_SYNC (0x00000001) + + +/* RAID Physical Disk Page 1 */ + +/* + * Host code (drivers, BIOS, utilities, etc.) should leave this define set to + * one and check Header.PageLength or NumPhysDiskPaths at runtime. + */ +#ifndef MPI2_RAID_PHYS_DISK1_PATH_MAX +#define MPI2_RAID_PHYS_DISK1_PATH_MAX (1) +#endif + +typedef struct _MPI2_RAIDPHYSDISK1_PATH +{ + U16 DevHandle; /* 0x00 */ + U16 Reserved1; /* 0x02 */ + U64 WWID; /* 0x04 */ + U64 OwnerWWID; /* 0x0C */ + U8 OwnerIdentifier; /* 0x14 */ + U8 Reserved2; /* 0x15 */ + U16 Flags; /* 0x16 */ +} MPI2_RAIDPHYSDISK1_PATH, MPI2_POINTER PTR_MPI2_RAIDPHYSDISK1_PATH, + Mpi2RaidPhysDisk1Path_t, MPI2_POINTER pMpi2RaidPhysDisk1Path_t; + +/* RAID Physical Disk Page 1 Physical Disk Path Flags field defines */ +#define MPI2_RAID_PHYSDISK1_FLAG_PRIMARY (0x0004) +#define MPI2_RAID_PHYSDISK1_FLAG_BROKEN (0x0002) +#define MPI2_RAID_PHYSDISK1_FLAG_INVALID (0x0001) + +typedef struct _MPI2_CONFIG_PAGE_RD_PDISK_1 +{ + MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */ + U8 NumPhysDiskPaths; /* 0x04 */ + U8 PhysDiskNum; /* 0x05 */ + U16 Reserved1; /* 0x06 */ + U32 Reserved2; /* 0x08 */ + MPI2_RAIDPHYSDISK1_PATH PhysicalDiskPath[MPI2_RAID_PHYS_DISK1_PATH_MAX];/* 0x0C */ +} MPI2_CONFIG_PAGE_RD_PDISK_1, + MPI2_POINTER PTR_MPI2_CONFIG_PAGE_RD_PDISK_1, + Mpi2RaidPhysDiskPage1_t, MPI2_POINTER pMpi2RaidPhysDiskPage1_t; + +#define MPI2_RAIDPHYSDISKPAGE1_PAGEVERSION (0x02) + + +/**************************************************************************** +* values for fields used by several types of SAS Config Pages +****************************************************************************/ + +/* values for NegotiatedLinkRates fields */ +#define MPI2_SAS_NEG_LINK_RATE_MASK_LOGICAL (0xF0) +#define MPI2_SAS_NEG_LINK_RATE_SHIFT_LOGICAL (4) +#define MPI2_SAS_NEG_LINK_RATE_MASK_PHYSICAL (0x0F) +/* link rates used for Negotiated Physical and Logical Link Rate */ +#define MPI2_SAS_NEG_LINK_RATE_UNKNOWN_LINK_RATE (0x00) +#define MPI2_SAS_NEG_LINK_RATE_PHY_DISABLED (0x01) +#define MPI2_SAS_NEG_LINK_RATE_NEGOTIATION_FAILED (0x02) +#define MPI2_SAS_NEG_LINK_RATE_SATA_OOB_COMPLETE (0x03) +#define MPI2_SAS_NEG_LINK_RATE_PORT_SELECTOR (0x04) +#define MPI2_SAS_NEG_LINK_RATE_SMP_RESET_IN_PROGRESS (0x05) +#define MPI2_SAS_NEG_LINK_RATE_1_5 (0x08) +#define MPI2_SAS_NEG_LINK_RATE_3_0 (0x09) +#define MPI2_SAS_NEG_LINK_RATE_6_0 (0x0A) + + +/* values for AttachedPhyInfo fields */ +#define MPI2_SAS_APHYINFO_INSIDE_ZPSDS_PERSISTENT (0x00000040) +#define MPI2_SAS_APHYINFO_REQUESTED_INSIDE_ZPSDS (0x00000020) +#define MPI2_SAS_APHYINFO_BREAK_REPLY_CAPABLE (0x00000010) + +#define MPI2_SAS_APHYINFO_REASON_MASK (0x0000000F) +#define MPI2_SAS_APHYINFO_REASON_UNKNOWN (0x00000000) +#define MPI2_SAS_APHYINFO_REASON_POWER_ON (0x00000001) +#define MPI2_SAS_APHYINFO_REASON_HARD_RESET (0x00000002) +#define MPI2_SAS_APHYINFO_REASON_SMP_PHY_CONTROL (0x00000003) +#define MPI2_SAS_APHYINFO_REASON_LOSS_OF_SYNC (0x00000004) +#define MPI2_SAS_APHYINFO_REASON_MULTIPLEXING_SEQ (0x00000005) +#define MPI2_SAS_APHYINFO_REASON_IT_NEXUS_LOSS_TIMER (0x00000006) +#define MPI2_SAS_APHYINFO_REASON_BREAK_TIMEOUT (0x00000007) +#define MPI2_SAS_APHYINFO_REASON_PHY_TEST_STOPPED (0x00000008) + + +/* values for PhyInfo fields */ +#define MPI2_SAS_PHYINFO_PHY_VACANT (0x80000000) +#define MPI2_SAS_PHYINFO_CHANGED_REQ_INSIDE_ZPSDS (0x04000000) +#define MPI2_SAS_PHYINFO_INSIDE_ZPSDS_PERSISTENT (0x02000000) +#define MPI2_SAS_PHYINFO_REQ_INSIDE_ZPSDS (0x01000000) +#define MPI2_SAS_PHYINFO_ZONE_GROUP_PERSISTENT (0x00400000) +#define MPI2_SAS_PHYINFO_INSIDE_ZPSDS (0x00200000) +#define MPI2_SAS_PHYINFO_ZONING_ENABLED (0x00100000) + +#define MPI2_SAS_PHYINFO_REASON_MASK (0x000F0000) +#define MPI2_SAS_PHYINFO_REASON_UNKNOWN (0x00000000) +#define MPI2_SAS_PHYINFO_REASON_POWER_ON (0x00010000) +#define MPI2_SAS_PHYINFO_REASON_HARD_RESET (0x00020000) +#define MPI2_SAS_PHYINFO_REASON_SMP_PHY_CONTROL (0x00030000) +#define MPI2_SAS_PHYINFO_REASON_LOSS_OF_SYNC (0x00040000) +#define MPI2_SAS_PHYINFO_REASON_MULTIPLEXING_SEQ (0x00050000) +#define MPI2_SAS_PHYINFO_REASON_IT_NEXUS_LOSS_TIMER (0x00060000) +#define MPI2_SAS_PHYINFO_REASON_BREAK_TIMEOUT (0x00070000) +#define MPI2_SAS_PHYINFO_REASON_PHY_TEST_STOPPED (0x00080000) + +#define MPI2_SAS_PHYINFO_MULTIPLEXING_SUPPORTED (0x00008000) +#define MPI2_SAS_PHYINFO_SATA_PORT_ACTIVE (0x00004000) +#define MPI2_SAS_PHYINFO_SATA_PORT_SELECTOR_PRESENT (0x00002000) +#define MPI2_SAS_PHYINFO_VIRTUAL_PHY (0x00001000) + +#define MPI2_SAS_PHYINFO_MASK_PARTIAL_PATHWAY_TIME (0x00000F00) +#define MPI2_SAS_PHYINFO_SHIFT_PARTIAL_PATHWAY_TIME (8) + +#define MPI2_SAS_PHYINFO_MASK_ROUTING_ATTRIBUTE (0x000000F0) +#define MPI2_SAS_PHYINFO_DIRECT_ROUTING (0x00000000) +#define MPI2_SAS_PHYINFO_SUBTRACTIVE_ROUTING (0x00000010) +#define MPI2_SAS_PHYINFO_TABLE_ROUTING (0x00000020) + + +/* values for SAS ProgrammedLinkRate fields */ +#define MPI2_SAS_PRATE_MAX_RATE_MASK (0xF0) +#define MPI2_SAS_PRATE_MAX_RATE_NOT_PROGRAMMABLE (0x00) +#define MPI2_SAS_PRATE_MAX_RATE_1_5 (0x80) +#define MPI2_SAS_PRATE_MAX_RATE_3_0 (0x90) +#define MPI2_SAS_PRATE_MAX_RATE_6_0 (0xA0) +#define MPI2_SAS_PRATE_MIN_RATE_MASK (0x0F) +#define MPI2_SAS_PRATE_MIN_RATE_NOT_PROGRAMMABLE (0x00) +#define MPI2_SAS_PRATE_MIN_RATE_1_5 (0x08) +#define MPI2_SAS_PRATE_MIN_RATE_3_0 (0x09) +#define MPI2_SAS_PRATE_MIN_RATE_6_0 (0x0A) + + +/* values for SAS HwLinkRate fields */ +#define MPI2_SAS_HWRATE_MAX_RATE_MASK (0xF0) +#define MPI2_SAS_HWRATE_MAX_RATE_1_5 (0x80) +#define MPI2_SAS_HWRATE_MAX_RATE_3_0 (0x90) +#define MPI2_SAS_HWRATE_MAX_RATE_6_0 (0xA0) +#define MPI2_SAS_HWRATE_MIN_RATE_MASK (0x0F) +#define MPI2_SAS_HWRATE_MIN_RATE_1_5 (0x08) +#define MPI2_SAS_HWRATE_MIN_RATE_3_0 (0x09) +#define MPI2_SAS_HWRATE_MIN_RATE_6_0 (0x0A) + + + +/**************************************************************************** +* SAS IO Unit Config Pages +****************************************************************************/ + +/* SAS IO Unit Page 0 */ + +typedef struct _MPI2_SAS_IO_UNIT0_PHY_DATA +{ + U8 Port; /* 0x00 */ + U8 PortFlags; /* 0x01 */ + U8 PhyFlags; /* 0x02 */ + U8 NegotiatedLinkRate; /* 0x03 */ + U32 ControllerPhyDeviceInfo;/* 0x04 */ + U16 AttachedDevHandle; /* 0x08 */ + U16 ControllerDevHandle; /* 0x0A */ + U32 DiscoveryStatus; /* 0x0C */ + U32 Reserved; /* 0x10 */ +} MPI2_SAS_IO_UNIT0_PHY_DATA, MPI2_POINTER PTR_MPI2_SAS_IO_UNIT0_PHY_DATA, + Mpi2SasIOUnit0PhyData_t, MPI2_POINTER pMpi2SasIOUnit0PhyData_t; + +/* + * Host code (drivers, BIOS, utilities, etc.) should leave this define set to + * one and check Header.ExtPageLength or NumPhys at runtime. + */ +#ifndef MPI2_SAS_IOUNIT0_PHY_MAX +#define MPI2_SAS_IOUNIT0_PHY_MAX (1) +#endif + +typedef struct _MPI2_CONFIG_PAGE_SASIOUNIT_0 +{ + MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /* 0x00 */ + U32 Reserved1; /* 0x08 */ + U8 NumPhys; /* 0x0C */ + U8 Reserved2; /* 0x0D */ + U16 Reserved3; /* 0x0E */ + MPI2_SAS_IO_UNIT0_PHY_DATA PhyData[MPI2_SAS_IOUNIT0_PHY_MAX]; /* 0x10 */ +} MPI2_CONFIG_PAGE_SASIOUNIT_0, + MPI2_POINTER PTR_MPI2_CONFIG_PAGE_SASIOUNIT_0, + Mpi2SasIOUnitPage0_t, MPI2_POINTER pMpi2SasIOUnitPage0_t; + +#define MPI2_SASIOUNITPAGE0_PAGEVERSION (0x05) + +/* values for SAS IO Unit Page 0 PortFlags */ +#define MPI2_SASIOUNIT0_PORTFLAGS_DISCOVERY_IN_PROGRESS (0x08) +#define MPI2_SASIOUNIT0_PORTFLAGS_AUTO_PORT_CONFIG (0x01) + +/* values for SAS IO Unit Page 0 PhyFlags */ +#define MPI2_SASIOUNIT0_PHYFLAGS_ZONING_ENABLED (0x10) +#define MPI2_SASIOUNIT0_PHYFLAGS_PHY_DISABLED (0x08) + +/* use MPI2_SAS_NEG_LINK_RATE_ defines for the NegotiatedLinkRate field */ + +/* see mpi2_sas.h for values for SAS IO Unit Page 0 ControllerPhyDeviceInfo values */ + +/* values for SAS IO Unit Page 0 DiscoveryStatus */ +#define MPI2_SASIOUNIT0_DS_MAX_ENCLOSURES_EXCEED (0x80000000) +#define MPI2_SASIOUNIT0_DS_MAX_EXPANDERS_EXCEED (0x40000000) +#define MPI2_SASIOUNIT0_DS_MAX_DEVICES_EXCEED (0x20000000) +#define MPI2_SASIOUNIT0_DS_MAX_TOPO_PHYS_EXCEED (0x10000000) +#define MPI2_SASIOUNIT0_DS_DOWNSTREAM_INITIATOR (0x08000000) +#define MPI2_SASIOUNIT0_DS_MULTI_SUBTRACTIVE_SUBTRACTIVE (0x00008000) +#define MPI2_SASIOUNIT0_DS_EXP_MULTI_SUBTRACTIVE (0x00004000) +#define MPI2_SASIOUNIT0_DS_MULTI_PORT_DOMAIN (0x00002000) +#define MPI2_SASIOUNIT0_DS_TABLE_TO_SUBTRACTIVE_LINK (0x00001000) +#define MPI2_SASIOUNIT0_DS_UNSUPPORTED_DEVICE (0x00000800) +#define MPI2_SASIOUNIT0_DS_TABLE_LINK (0x00000400) +#define MPI2_SASIOUNIT0_DS_SUBTRACTIVE_LINK (0x00000200) +#define MPI2_SASIOUNIT0_DS_SMP_CRC_ERROR (0x00000100) +#define MPI2_SASIOUNIT0_DS_SMP_FUNCTION_FAILED (0x00000080) +#define MPI2_SASIOUNIT0_DS_INDEX_NOT_EXIST (0x00000040) +#define MPI2_SASIOUNIT0_DS_OUT_ROUTE_ENTRIES (0x00000020) +#define MPI2_SASIOUNIT0_DS_SMP_TIMEOUT (0x00000010) +#define MPI2_SASIOUNIT0_DS_MULTIPLE_PORTS (0x00000004) +#define MPI2_SASIOUNIT0_DS_UNADDRESSABLE_DEVICE (0x00000002) +#define MPI2_SASIOUNIT0_DS_LOOP_DETECTED (0x00000001) + + +/* SAS IO Unit Page 1 */ + +typedef struct _MPI2_SAS_IO_UNIT1_PHY_DATA +{ + U8 Port; /* 0x00 */ + U8 PortFlags; /* 0x01 */ + U8 PhyFlags; /* 0x02 */ + U8 MaxMinLinkRate; /* 0x03 */ + U32 ControllerPhyDeviceInfo; /* 0x04 */ + U16 MaxTargetPortConnectTime; /* 0x08 */ + U16 Reserved1; /* 0x0A */ +} MPI2_SAS_IO_UNIT1_PHY_DATA, MPI2_POINTER PTR_MPI2_SAS_IO_UNIT1_PHY_DATA, + Mpi2SasIOUnit1PhyData_t, MPI2_POINTER pMpi2SasIOUnit1PhyData_t; + +/* + * Host code (drivers, BIOS, utilities, etc.) should leave this define set to + * one and check Header.ExtPageLength or NumPhys at runtime. + */ +#ifndef MPI2_SAS_IOUNIT1_PHY_MAX +#define MPI2_SAS_IOUNIT1_PHY_MAX (1) +#endif + +typedef struct _MPI2_CONFIG_PAGE_SASIOUNIT_1 +{ + MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /* 0x00 */ + U16 ControlFlags; /* 0x08 */ + U16 SASNarrowMaxQueueDepth; /* 0x0A */ + U16 AdditionalControlFlags; /* 0x0C */ + U16 SASWideMaxQueueDepth; /* 0x0E */ + U8 NumPhys; /* 0x10 */ + U8 SATAMaxQDepth; /* 0x11 */ + U8 ReportDeviceMissingDelay; /* 0x12 */ + U8 IODeviceMissingDelay; /* 0x13 */ + MPI2_SAS_IO_UNIT1_PHY_DATA PhyData[MPI2_SAS_IOUNIT1_PHY_MAX]; /* 0x14 */ +} MPI2_CONFIG_PAGE_SASIOUNIT_1, + MPI2_POINTER PTR_MPI2_CONFIG_PAGE_SASIOUNIT_1, + Mpi2SasIOUnitPage1_t, MPI2_POINTER pMpi2SasIOUnitPage1_t; + +#define MPI2_SASIOUNITPAGE1_PAGEVERSION (0x09) + +/* values for SAS IO Unit Page 1 ControlFlags */ +#define MPI2_SASIOUNIT1_CONTROL_DEVICE_SELF_TEST (0x8000) +#define MPI2_SASIOUNIT1_CONTROL_SATA_3_0_MAX (0x4000) +#define MPI2_SASIOUNIT1_CONTROL_SATA_1_5_MAX (0x2000) +#define MPI2_SASIOUNIT1_CONTROL_SATA_SW_PRESERVE (0x1000) + +#define MPI2_SASIOUNIT1_CONTROL_MASK_DEV_SUPPORT (0x0600) +#define MPI2_SASIOUNIT1_CONTROL_SHIFT_DEV_SUPPORT (9) +#define MPI2_SASIOUNIT1_CONTROL_DEV_SUPPORT_BOTH (0x0) +#define MPI2_SASIOUNIT1_CONTROL_DEV_SAS_SUPPORT (0x1) +#define MPI2_SASIOUNIT1_CONTROL_DEV_SATA_SUPPORT (0x2) + +#define MPI2_SASIOUNIT1_CONTROL_SATA_48BIT_LBA_REQUIRED (0x0080) +#define MPI2_SASIOUNIT1_CONTROL_SATA_SMART_REQUIRED (0x0040) +#define MPI2_SASIOUNIT1_CONTROL_SATA_NCQ_REQUIRED (0x0020) +#define MPI2_SASIOUNIT1_CONTROL_SATA_FUA_REQUIRED (0x0010) +#define MPI2_SASIOUNIT1_CONTROL_TABLE_SUBTRACTIVE_ILLEGAL (0x0008) +#define MPI2_SASIOUNIT1_CONTROL_SUBTRACTIVE_ILLEGAL (0x0004) +#define MPI2_SASIOUNIT1_CONTROL_FIRST_LVL_DISC_ONLY (0x0002) +#define MPI2_SASIOUNIT1_CONTROL_CLEAR_AFFILIATION (0x0001) + +/* values for SAS IO Unit Page 1 AdditionalControlFlags */ +#define MPI2_SASIOUNIT1_ACONTROL_MULTI_PORT_DOMAIN_ILLEGAL (0x0080) +#define MPI2_SASIOUNIT1_ACONTROL_SATA_ASYNCHROUNOUS_NOTIFICATION (0x0040) +#define MPI2_SASIOUNIT1_ACONTROL_INVALID_TOPOLOGY_CORRECTION (0x0020) +#define MPI2_SASIOUNIT1_ACONTROL_PORT_ENABLE_ONLY_SATA_LINK_RESET (0x0010) +#define MPI2_SASIOUNIT1_ACONTROL_OTHER_AFFILIATION_SATA_LINK_RESET (0x0008) +#define MPI2_SASIOUNIT1_ACONTROL_SELF_AFFILIATION_SATA_LINK_RESET (0x0004) +#define MPI2_SASIOUNIT1_ACONTROL_NO_AFFILIATION_SATA_LINK_RESET (0x0002) +#define MPI2_SASIOUNIT1_ACONTROL_ALLOW_TABLE_TO_TABLE (0x0001) + +/* defines for SAS IO Unit Page 1 ReportDeviceMissingDelay */ +#define MPI2_SASIOUNIT1_REPORT_MISSING_TIMEOUT_MASK (0x7F) +#define MPI2_SASIOUNIT1_REPORT_MISSING_UNIT_16 (0x80) + +/* values for SAS IO Unit Page 1 PortFlags */ +#define MPI2_SASIOUNIT1_PORT_FLAGS_AUTO_PORT_CONFIG (0x01) + +/* values for SAS IO Unit Page 2 PhyFlags */ +#define MPI2_SASIOUNIT1_PHYFLAGS_ZONING_ENABLE (0x10) +#define MPI2_SASIOUNIT1_PHYFLAGS_PHY_DISABLE (0x08) + +/* values for SAS IO Unit Page 0 MaxMinLinkRate */ +#define MPI2_SASIOUNIT1_MAX_RATE_MASK (0xF0) +#define MPI2_SASIOUNIT1_MAX_RATE_1_5 (0x80) +#define MPI2_SASIOUNIT1_MAX_RATE_3_0 (0x90) +#define MPI2_SASIOUNIT1_MAX_RATE_6_0 (0xA0) +#define MPI2_SASIOUNIT1_MIN_RATE_MASK (0x0F) +#define MPI2_SASIOUNIT1_MIN_RATE_1_5 (0x08) +#define MPI2_SASIOUNIT1_MIN_RATE_3_0 (0x09) +#define MPI2_SASIOUNIT1_MIN_RATE_6_0 (0x0A) + +/* see mpi2_sas.h for values for SAS IO Unit Page 1 ControllerPhyDeviceInfo values */ + + +/* SAS IO Unit Page 4 */ + +typedef struct _MPI2_SAS_IOUNIT4_SPINUP_GROUP +{ + U8 MaxTargetSpinup; /* 0x00 */ + U8 SpinupDelay; /* 0x01 */ + U16 Reserved1; /* 0x02 */ +} MPI2_SAS_IOUNIT4_SPINUP_GROUP, MPI2_POINTER PTR_MPI2_SAS_IOUNIT4_SPINUP_GROUP, + Mpi2SasIOUnit4SpinupGroup_t, MPI2_POINTER pMpi2SasIOUnit4SpinupGroup_t; + +/* + * Host code (drivers, BIOS, utilities, etc.) should leave this define set to + * four and check Header.ExtPageLength or NumPhys at runtime. + */ +#ifndef MPI2_SAS_IOUNIT4_PHY_MAX +#define MPI2_SAS_IOUNIT4_PHY_MAX (4) +#endif + +typedef struct _MPI2_CONFIG_PAGE_SASIOUNIT_4 +{ + MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /* 0x00 */ + MPI2_SAS_IOUNIT4_SPINUP_GROUP SpinupGroupParameters[4]; /* 0x08 */ + U32 Reserved1; /* 0x18 */ + U32 Reserved2; /* 0x1C */ + U32 Reserved3; /* 0x20 */ + U8 BootDeviceWaitTime; /* 0x24 */ + U8 Reserved4; /* 0x25 */ + U16 Reserved5; /* 0x26 */ + U8 NumPhys; /* 0x28 */ + U8 PEInitialSpinupDelay; /* 0x29 */ + U8 PEReplyDelay; /* 0x2A */ + U8 Flags; /* 0x2B */ + U8 PHY[MPI2_SAS_IOUNIT4_PHY_MAX]; /* 0x2C */ +} MPI2_CONFIG_PAGE_SASIOUNIT_4, + MPI2_POINTER PTR_MPI2_CONFIG_PAGE_SASIOUNIT_4, + Mpi2SasIOUnitPage4_t, MPI2_POINTER pMpi2SasIOUnitPage4_t; + +#define MPI2_SASIOUNITPAGE4_PAGEVERSION (0x02) + +/* defines for Flags field */ +#define MPI2_SASIOUNIT4_FLAGS_AUTO_PORTENABLE (0x01) + +/* defines for PHY field */ +#define MPI2_SASIOUNIT4_PHY_SPINUP_GROUP_MASK (0x03) + + +/**************************************************************************** +* SAS Expander Config Pages +****************************************************************************/ + +/* SAS Expander Page 0 */ + +typedef struct _MPI2_CONFIG_PAGE_EXPANDER_0 +{ + MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /* 0x00 */ + U8 PhysicalPort; /* 0x08 */ + U8 ReportGenLength; /* 0x09 */ + U16 EnclosureHandle; /* 0x0A */ + U64 SASAddress; /* 0x0C */ + U32 DiscoveryStatus; /* 0x14 */ + U16 DevHandle; /* 0x18 */ + U16 ParentDevHandle; /* 0x1A */ + U16 ExpanderChangeCount; /* 0x1C */ + U16 ExpanderRouteIndexes; /* 0x1E */ + U8 NumPhys; /* 0x20 */ + U8 SASLevel; /* 0x21 */ + U16 Flags; /* 0x22 */ + U16 STPBusInactivityTimeLimit; /* 0x24 */ + U16 STPMaxConnectTimeLimit; /* 0x26 */ + U16 STP_SMP_NexusLossTime; /* 0x28 */ + U16 MaxNumRoutedSasAddresses; /* 0x2A */ + U64 ActiveZoneManagerSASAddress;/* 0x2C */ + U16 ZoneLockInactivityLimit; /* 0x34 */ + U16 Reserved1; /* 0x36 */ +} MPI2_CONFIG_PAGE_EXPANDER_0, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_EXPANDER_0, + Mpi2ExpanderPage0_t, MPI2_POINTER pMpi2ExpanderPage0_t; + +#define MPI2_SASEXPANDER0_PAGEVERSION (0x05) + +/* values for SAS Expander Page 0 DiscoveryStatus field */ +#define MPI2_SAS_EXPANDER0_DS_MAX_ENCLOSURES_EXCEED (0x80000000) +#define MPI2_SAS_EXPANDER0_DS_MAX_EXPANDERS_EXCEED (0x40000000) +#define MPI2_SAS_EXPANDER0_DS_MAX_DEVICES_EXCEED (0x20000000) +#define MPI2_SAS_EXPANDER0_DS_MAX_TOPO_PHYS_EXCEED (0x10000000) +#define MPI2_SAS_EXPANDER0_DS_DOWNSTREAM_INITIATOR (0x08000000) +#define MPI2_SAS_EXPANDER0_DS_MULTI_SUBTRACTIVE_SUBTRACTIVE (0x00008000) +#define MPI2_SAS_EXPANDER0_DS_EXP_MULTI_SUBTRACTIVE (0x00004000) +#define MPI2_SAS_EXPANDER0_DS_MULTI_PORT_DOMAIN (0x00002000) +#define MPI2_SAS_EXPANDER0_DS_TABLE_TO_SUBTRACTIVE_LINK (0x00001000) +#define MPI2_SAS_EXPANDER0_DS_UNSUPPORTED_DEVICE (0x00000800) +#define MPI2_SAS_EXPANDER0_DS_TABLE_LINK (0x00000400) +#define MPI2_SAS_EXPANDER0_DS_SUBTRACTIVE_LINK (0x00000200) +#define MPI2_SAS_EXPANDER0_DS_SMP_CRC_ERROR (0x00000100) +#define MPI2_SAS_EXPANDER0_DS_SMP_FUNCTION_FAILED (0x00000080) +#define MPI2_SAS_EXPANDER0_DS_INDEX_NOT_EXIST (0x00000040) +#define MPI2_SAS_EXPANDER0_DS_OUT_ROUTE_ENTRIES (0x00000020) +#define MPI2_SAS_EXPANDER0_DS_SMP_TIMEOUT (0x00000010) +#define MPI2_SAS_EXPANDER0_DS_MULTIPLE_PORTS (0x00000004) +#define MPI2_SAS_EXPANDER0_DS_UNADDRESSABLE_DEVICE (0x00000002) +#define MPI2_SAS_EXPANDER0_DS_LOOP_DETECTED (0x00000001) + +/* values for SAS Expander Page 0 Flags field */ +#define MPI2_SAS_EXPANDER0_FLAGS_ZONE_LOCKED (0x1000) +#define MPI2_SAS_EXPANDER0_FLAGS_SUPPORTED_PHYSICAL_PRES (0x0800) +#define MPI2_SAS_EXPANDER0_FLAGS_ASSERTED_PHYSICAL_PRES (0x0400) +#define MPI2_SAS_EXPANDER0_FLAGS_ZONING_SUPPORT (0x0200) +#define MPI2_SAS_EXPANDER0_FLAGS_ENABLED_ZONING (0x0100) +#define MPI2_SAS_EXPANDER0_FLAGS_TABLE_TO_TABLE_SUPPORT (0x0080) +#define MPI2_SAS_EXPANDER0_FLAGS_CONNECTOR_END_DEVICE (0x0010) +#define MPI2_SAS_EXPANDER0_FLAGS_OTHERS_CONFIG (0x0004) +#define MPI2_SAS_EXPANDER0_FLAGS_CONFIG_IN_PROGRESS (0x0002) +#define MPI2_SAS_EXPANDER0_FLAGS_ROUTE_TABLE_CONFIG (0x0001) + + +/* SAS Expander Page 1 */ + +typedef struct _MPI2_CONFIG_PAGE_EXPANDER_1 +{ + MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /* 0x00 */ + U8 PhysicalPort; /* 0x08 */ + U8 Reserved1; /* 0x09 */ + U16 Reserved2; /* 0x0A */ + U8 NumPhys; /* 0x0C */ + U8 Phy; /* 0x0D */ + U16 NumTableEntriesProgrammed; /* 0x0E */ + U8 ProgrammedLinkRate; /* 0x10 */ + U8 HwLinkRate; /* 0x11 */ + U16 AttachedDevHandle; /* 0x12 */ + U32 PhyInfo; /* 0x14 */ + U32 AttachedDeviceInfo; /* 0x18 */ + U16 ExpanderDevHandle; /* 0x1C */ + U8 ChangeCount; /* 0x1E */ + U8 NegotiatedLinkRate; /* 0x1F */ + U8 PhyIdentifier; /* 0x20 */ + U8 AttachedPhyIdentifier; /* 0x21 */ + U8 Reserved3; /* 0x22 */ + U8 DiscoveryInfo; /* 0x23 */ + U32 AttachedPhyInfo; /* 0x24 */ + U8 ZoneGroup; /* 0x28 */ + U8 SelfConfigStatus; /* 0x29 */ + U16 Reserved4; /* 0x2A */ +} MPI2_CONFIG_PAGE_EXPANDER_1, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_EXPANDER_1, + Mpi2ExpanderPage1_t, MPI2_POINTER pMpi2ExpanderPage1_t; + +#define MPI2_SASEXPANDER1_PAGEVERSION (0x02) + +/* use MPI2_SAS_PRATE_ defines for the ProgrammedLinkRate field */ + +/* use MPI2_SAS_HWRATE_ defines for the HwLinkRate field */ + +/* use MPI2_SAS_PHYINFO_ for the PhyInfo field */ + +/* see mpi2_sas.h for the MPI2_SAS_DEVICE_INFO_ defines used for the AttachedDeviceInfo field */ + +/* use MPI2_SAS_NEG_LINK_RATE_ defines for the NegotiatedLinkRate field */ + +/* use MPI2_SAS_APHYINFO_ defines for AttachedPhyInfo field */ + +/* values for SAS Expander Page 1 DiscoveryInfo field */ +#define MPI2_SAS_EXPANDER1_DISCINFO_BAD_PHY_DISABLED (0x04) +#define MPI2_SAS_EXPANDER1_DISCINFO_LINK_STATUS_CHANGE (0x02) +#define MPI2_SAS_EXPANDER1_DISCINFO_NO_ROUTING_ENTRIES (0x01) + + +/**************************************************************************** +* SAS Device Config Pages +****************************************************************************/ + +/* SAS Device Page 0 */ + +typedef struct _MPI2_CONFIG_PAGE_SAS_DEV_0 +{ + MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /* 0x00 */ + U16 Slot; /* 0x08 */ + U16 EnclosureHandle; /* 0x0A */ + U64 SASAddress; /* 0x0C */ + U16 ParentDevHandle; /* 0x14 */ + U8 PhyNum; /* 0x16 */ + U8 AccessStatus; /* 0x17 */ + U16 DevHandle; /* 0x18 */ + U8 AttachedPhyIdentifier; /* 0x1A */ + U8 ZoneGroup; /* 0x1B */ + U32 DeviceInfo; /* 0x1C */ + U16 Flags; /* 0x20 */ + U8 PhysicalPort; /* 0x22 */ + U8 MaxPortConnections; /* 0x23 */ + U64 DeviceName; /* 0x24 */ + U8 PortGroups; /* 0x2C */ + U8 DmaGroup; /* 0x2D */ + U8 ControlGroup; /* 0x2E */ + U8 Reserved1; /* 0x2F */ + U32 Reserved2; /* 0x30 */ + U32 Reserved3; /* 0x34 */ +} MPI2_CONFIG_PAGE_SAS_DEV_0, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_SAS_DEV_0, + Mpi2SasDevicePage0_t, MPI2_POINTER pMpi2SasDevicePage0_t; + +#define MPI2_SASDEVICE0_PAGEVERSION (0x08) + +/* values for SAS Device Page 0 AccessStatus field */ +#define MPI2_SAS_DEVICE0_ASTATUS_NO_ERRORS (0x00) +#define MPI2_SAS_DEVICE0_ASTATUS_SATA_INIT_FAILED (0x01) +#define MPI2_SAS_DEVICE0_ASTATUS_SATA_CAPABILITY_FAILED (0x02) +#define MPI2_SAS_DEVICE0_ASTATUS_SATA_AFFILIATION_CONFLICT (0x03) +#define MPI2_SAS_DEVICE0_ASTATUS_SATA_NEEDS_INITIALIZATION (0x04) +#define MPI2_SAS_DEVICE0_ASTATUS_ROUTE_NOT_ADDRESSABLE (0x05) +#define MPI2_SAS_DEVICE0_ASTATUS_SMP_ERROR_NOT_ADDRESSABLE (0x06) +#define MPI2_SAS_DEVICE0_ASTATUS_DEVICE_BLOCKED (0x07) +/* specific values for SATA Init failures */ +#define MPI2_SAS_DEVICE0_ASTATUS_SIF_UNKNOWN (0x10) +#define MPI2_SAS_DEVICE0_ASTATUS_SIF_AFFILIATION_CONFLICT (0x11) +#define MPI2_SAS_DEVICE0_ASTATUS_SIF_DIAG (0x12) +#define MPI2_SAS_DEVICE0_ASTATUS_SIF_IDENTIFICATION (0x13) +#define MPI2_SAS_DEVICE0_ASTATUS_SIF_CHECK_POWER (0x14) +#define MPI2_SAS_DEVICE0_ASTATUS_SIF_PIO_SN (0x15) +#define MPI2_SAS_DEVICE0_ASTATUS_SIF_MDMA_SN (0x16) +#define MPI2_SAS_DEVICE0_ASTATUS_SIF_UDMA_SN (0x17) +#define MPI2_SAS_DEVICE0_ASTATUS_SIF_ZONING_VIOLATION (0x18) +#define MPI2_SAS_DEVICE0_ASTATUS_SIF_NOT_ADDRESSABLE (0x19) +#define MPI2_SAS_DEVICE0_ASTATUS_SIF_MAX (0x1F) + +/* see mpi2_sas.h for values for SAS Device Page 0 DeviceInfo values */ + +/* values for SAS Device Page 0 Flags field */ +#define MPI2_SAS_DEVICE0_FLAGS_SATA_ASYNCHRONOUS_NOTIFY (0x0400) +#define MPI2_SAS_DEVICE0_FLAGS_SATA_SW_PRESERVE (0x0200) +#define MPI2_SAS_DEVICE0_FLAGS_UNSUPPORTED_DEVICE (0x0100) +#define MPI2_SAS_DEVICE0_FLAGS_SATA_48BIT_LBA_SUPPORTED (0x0080) +#define MPI2_SAS_DEVICE0_FLAGS_SATA_SMART_SUPPORTED (0x0040) +#define MPI2_SAS_DEVICE0_FLAGS_SATA_NCQ_SUPPORTED (0x0020) +#define MPI2_SAS_DEVICE0_FLAGS_SATA_FUA_SUPPORTED (0x0010) +#define MPI2_SAS_DEVICE0_FLAGS_PORT_SELECTOR_ATTACH (0x0008) +#define MPI2_SAS_DEVICE0_FLAGS_DEVICE_PRESENT (0x0001) + + +/* SAS Device Page 1 */ + +typedef struct _MPI2_CONFIG_PAGE_SAS_DEV_1 +{ + MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /* 0x00 */ + U32 Reserved1; /* 0x08 */ + U64 SASAddress; /* 0x0C */ + U32 Reserved2; /* 0x14 */ + U16 DevHandle; /* 0x18 */ + U16 Reserved3; /* 0x1A */ + U8 InitialRegDeviceFIS[20];/* 0x1C */ +} MPI2_CONFIG_PAGE_SAS_DEV_1, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_SAS_DEV_1, + Mpi2SasDevicePage1_t, MPI2_POINTER pMpi2SasDevicePage1_t; + +#define MPI2_SASDEVICE1_PAGEVERSION (0x01) + + +/**************************************************************************** +* SAS PHY Config Pages +****************************************************************************/ + +/* SAS PHY Page 0 */ + +typedef struct _MPI2_CONFIG_PAGE_SAS_PHY_0 +{ + MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /* 0x00 */ + U16 OwnerDevHandle; /* 0x08 */ + U16 Reserved1; /* 0x0A */ + U16 AttachedDevHandle; /* 0x0C */ + U8 AttachedPhyIdentifier; /* 0x0E */ + U8 Reserved2; /* 0x0F */ + U32 AttachedPhyInfo; /* 0x10 */ + U8 ProgrammedLinkRate; /* 0x14 */ + U8 HwLinkRate; /* 0x15 */ + U8 ChangeCount; /* 0x16 */ + U8 Flags; /* 0x17 */ + U32 PhyInfo; /* 0x18 */ + U8 NegotiatedLinkRate; /* 0x1C */ + U8 Reserved3; /* 0x1D */ + U16 Reserved4; /* 0x1E */ +} MPI2_CONFIG_PAGE_SAS_PHY_0, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_SAS_PHY_0, + Mpi2SasPhyPage0_t, MPI2_POINTER pMpi2SasPhyPage0_t; + +#define MPI2_SASPHY0_PAGEVERSION (0x03) + +/* use MPI2_SAS_PRATE_ defines for the ProgrammedLinkRate field */ + +/* use MPI2_SAS_HWRATE_ defines for the HwLinkRate field */ + +/* values for SAS PHY Page 0 Flags field */ +#define MPI2_SAS_PHY0_FLAGS_SGPIO_DIRECT_ATTACH_ENC (0x01) + +/* use MPI2_SAS_APHYINFO_ defines for AttachedPhyInfo field */ + +/* use MPI2_SAS_NEG_LINK_RATE_ defines for the NegotiatedLinkRate field */ + +/* use MPI2_SAS_PHYINFO_ for the PhyInfo field */ + + +/* SAS PHY Page 1 */ + +typedef struct _MPI2_CONFIG_PAGE_SAS_PHY_1 +{ + MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /* 0x00 */ + U32 Reserved1; /* 0x08 */ + U32 InvalidDwordCount; /* 0x0C */ + U32 RunningDisparityErrorCount; /* 0x10 */ + U32 LossDwordSynchCount; /* 0x14 */ + U32 PhyResetProblemCount; /* 0x18 */ +} MPI2_CONFIG_PAGE_SAS_PHY_1, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_SAS_PHY_1, + Mpi2SasPhyPage1_t, MPI2_POINTER pMpi2SasPhyPage1_t; + +#define MPI2_SASPHY1_PAGEVERSION (0x01) + + +/**************************************************************************** +* SAS Port Config Pages +****************************************************************************/ + +/* SAS Port Page 0 */ + +typedef struct _MPI2_CONFIG_PAGE_SAS_PORT_0 +{ + MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /* 0x00 */ + U8 PortNumber; /* 0x08 */ + U8 PhysicalPort; /* 0x09 */ + U8 PortWidth; /* 0x0A */ + U8 PhysicalPortWidth; /* 0x0B */ + U8 ZoneGroup; /* 0x0C */ + U8 Reserved1; /* 0x0D */ + U16 Reserved2; /* 0x0E */ + U64 SASAddress; /* 0x10 */ + U32 DeviceInfo; /* 0x18 */ + U32 Reserved3; /* 0x1C */ + U32 Reserved4; /* 0x20 */ +} MPI2_CONFIG_PAGE_SAS_PORT_0, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_SAS_PORT_0, + Mpi2SasPortPage0_t, MPI2_POINTER pMpi2SasPortPage0_t; + +#define MPI2_SASPORT0_PAGEVERSION (0x00) + +/* see mpi2_sas.h for values for SAS Port Page 0 DeviceInfo values */ + + +/**************************************************************************** +* SAS Enclosure Config Pages +****************************************************************************/ + +/* SAS Enclosure Page 0 */ + +typedef struct _MPI2_CONFIG_PAGE_SAS_ENCLOSURE_0 +{ + MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /* 0x00 */ + U32 Reserved1; /* 0x08 */ + U64 EnclosureLogicalID; /* 0x0C */ + U16 Flags; /* 0x14 */ + U16 EnclosureHandle; /* 0x16 */ + U16 NumSlots; /* 0x18 */ + U16 StartSlot; /* 0x1A */ + U16 Reserved2; /* 0x1C */ + U16 SEPDevHandle; /* 0x1E */ + U32 Reserved3; /* 0x20 */ + U32 Reserved4; /* 0x24 */ +} MPI2_CONFIG_PAGE_SAS_ENCLOSURE_0, + MPI2_POINTER PTR_MPI2_CONFIG_PAGE_SAS_ENCLOSURE_0, + Mpi2SasEnclosurePage0_t, MPI2_POINTER pMpi2SasEnclosurePage0_t; + +#define MPI2_SASENCLOSURE0_PAGEVERSION (0x03) + +/* values for SAS Enclosure Page 0 Flags field */ +#define MPI2_SAS_ENCLS0_FLAGS_MNG_MASK (0x000F) +#define MPI2_SAS_ENCLS0_FLAGS_MNG_UNKNOWN (0x0000) +#define MPI2_SAS_ENCLS0_FLAGS_MNG_IOC_SES (0x0001) +#define MPI2_SAS_ENCLS0_FLAGS_MNG_IOC_SGPIO (0x0002) +#define MPI2_SAS_ENCLS0_FLAGS_MNG_EXP_SGPIO (0x0003) +#define MPI2_SAS_ENCLS0_FLAGS_MNG_SES_ENCLOSURE (0x0004) +#define MPI2_SAS_ENCLS0_FLAGS_MNG_IOC_GPIO (0x0005) + + +/**************************************************************************** +* Log Config Page +****************************************************************************/ + +/* Log Page 0 */ + +/* + * Host code (drivers, BIOS, utilities, etc.) should leave this define set to + * one and check Header.ExtPageLength or NumPhys at runtime. + */ +#ifndef MPI2_LOG_0_NUM_LOG_ENTRIES +#define MPI2_LOG_0_NUM_LOG_ENTRIES (1) +#endif + +#define MPI2_LOG_0_LOG_DATA_LENGTH (0x1C) + +typedef struct _MPI2_LOG_0_ENTRY +{ + U64 TimeStamp; /* 0x00 */ + U32 Reserved1; /* 0x08 */ + U16 LogSequence; /* 0x0C */ + U16 LogEntryQualifier; /* 0x0E */ + U8 VP_ID; /* 0x10 */ + U8 VF_ID; /* 0x11 */ + U16 Reserved2; /* 0x12 */ + U8 LogData[MPI2_LOG_0_LOG_DATA_LENGTH];/* 0x14 */ +} MPI2_LOG_0_ENTRY, MPI2_POINTER PTR_MPI2_LOG_0_ENTRY, + Mpi2Log0Entry_t, MPI2_POINTER pMpi2Log0Entry_t; + +/* values for Log Page 0 LogEntry LogEntryQualifier field */ +#define MPI2_LOG_0_ENTRY_QUAL_ENTRY_UNUSED (0x0000) +#define MPI2_LOG_0_ENTRY_QUAL_POWER_ON_RESET (0x0001) +#define MPI2_LOG_0_ENTRY_QUAL_TIMESTAMP_UPDATE (0x0002) +#define MPI2_LOG_0_ENTRY_QUAL_MIN_IMPLEMENT_SPEC (0x8000) +#define MPI2_LOG_0_ENTRY_QUAL_MAX_IMPLEMENT_SPEC (0xFFFF) + +typedef struct _MPI2_CONFIG_PAGE_LOG_0 +{ + MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /* 0x00 */ + U32 Reserved1; /* 0x08 */ + U32 Reserved2; /* 0x0C */ + U16 NumLogEntries; /* 0x10 */ + U16 Reserved3; /* 0x12 */ + MPI2_LOG_0_ENTRY LogEntry[MPI2_LOG_0_NUM_LOG_ENTRIES]; /* 0x14 */ +} MPI2_CONFIG_PAGE_LOG_0, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_LOG_0, + Mpi2LogPage0_t, MPI2_POINTER pMpi2LogPage0_t; + +#define MPI2_LOG_0_PAGEVERSION (0x02) + + +/**************************************************************************** +* RAID Config Page +****************************************************************************/ + +/* RAID Page 0 */ + +/* + * Host code (drivers, BIOS, utilities, etc.) should leave this define set to + * one and check Header.ExtPageLength or NumPhys at runtime. + */ +#ifndef MPI2_RAIDCONFIG0_MAX_ELEMENTS +#define MPI2_RAIDCONFIG0_MAX_ELEMENTS (1) +#endif + +typedef struct _MPI2_RAIDCONFIG0_CONFIG_ELEMENT +{ + U16 ElementFlags; /* 0x00 */ + U16 VolDevHandle; /* 0x02 */ + U8 HotSparePool; /* 0x04 */ + U8 PhysDiskNum; /* 0x05 */ + U16 PhysDiskDevHandle; /* 0x06 */ +} MPI2_RAIDCONFIG0_CONFIG_ELEMENT, + MPI2_POINTER PTR_MPI2_RAIDCONFIG0_CONFIG_ELEMENT, + Mpi2RaidConfig0ConfigElement_t, MPI2_POINTER pMpi2RaidConfig0ConfigElement_t; + +/* values for the ElementFlags field */ +#define MPI2_RAIDCONFIG0_EFLAGS_MASK_ELEMENT_TYPE (0x000F) +#define MPI2_RAIDCONFIG0_EFLAGS_VOLUME_ELEMENT (0x0000) +#define MPI2_RAIDCONFIG0_EFLAGS_VOL_PHYS_DISK_ELEMENT (0x0001) +#define MPI2_RAIDCONFIG0_EFLAGS_HOT_SPARE_ELEMENT (0x0002) +#define MPI2_RAIDCONFIG0_EFLAGS_OCE_ELEMENT (0x0003) + + +typedef struct _MPI2_CONFIG_PAGE_RAID_CONFIGURATION_0 +{ + MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /* 0x00 */ + U8 NumHotSpares; /* 0x08 */ + U8 NumPhysDisks; /* 0x09 */ + U8 NumVolumes; /* 0x0A */ + U8 ConfigNum; /* 0x0B */ + U32 Flags; /* 0x0C */ + U8 ConfigGUID[24]; /* 0x10 */ + U32 Reserved1; /* 0x28 */ + U8 NumElements; /* 0x2C */ + U8 Reserved2; /* 0x2D */ + U16 Reserved3; /* 0x2E */ + MPI2_RAIDCONFIG0_CONFIG_ELEMENT ConfigElement[MPI2_RAIDCONFIG0_MAX_ELEMENTS]; /* 0x30 */ +} MPI2_CONFIG_PAGE_RAID_CONFIGURATION_0, + MPI2_POINTER PTR_MPI2_CONFIG_PAGE_RAID_CONFIGURATION_0, + Mpi2RaidConfigurationPage0_t, MPI2_POINTER pMpi2RaidConfigurationPage0_t; + +#define MPI2_RAIDCONFIG0_PAGEVERSION (0x00) + +/* values for RAID Configuration Page 0 Flags field */ +#define MPI2_RAIDCONFIG0_FLAG_FOREIGN_CONFIG (0x00000001) + + +/**************************************************************************** +* Driver Persistent Mapping Config Pages +****************************************************************************/ + +/* Driver Persistent Mapping Page 0 */ + +typedef struct _MPI2_CONFIG_PAGE_DRIVER_MAP0_ENTRY +{ + U64 PhysicalIdentifier; /* 0x00 */ + U16 MappingInformation; /* 0x08 */ + U16 DeviceIndex; /* 0x0A */ + U32 PhysicalBitsMapping; /* 0x0C */ + U32 Reserved1; /* 0x10 */ +} MPI2_CONFIG_PAGE_DRIVER_MAP0_ENTRY, + MPI2_POINTER PTR_MPI2_CONFIG_PAGE_DRIVER_MAP0_ENTRY, + Mpi2DriverMap0Entry_t, MPI2_POINTER pMpi2DriverMap0Entry_t; + +typedef struct _MPI2_CONFIG_PAGE_DRIVER_MAPPING_0 +{ + MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /* 0x00 */ + MPI2_CONFIG_PAGE_DRIVER_MAP0_ENTRY Entry; /* 0x08 */ +} MPI2_CONFIG_PAGE_DRIVER_MAPPING_0, + MPI2_POINTER PTR_MPI2_CONFIG_PAGE_DRIVER_MAPPING_0, + Mpi2DriverMappingPage0_t, MPI2_POINTER pMpi2DriverMappingPage0_t; + +#define MPI2_DRIVERMAPPING0_PAGEVERSION (0x00) + +/* values for Driver Persistent Mapping Page 0 MappingInformation field */ +#define MPI2_DRVMAP0_MAPINFO_SLOT_MASK (0x07F0) +#define MPI2_DRVMAP0_MAPINFO_SLOT_SHIFT (4) +#define MPI2_DRVMAP0_MAPINFO_MISSING_MASK (0x000F) + + +#endif + diff --git a/drivers/scsi/mpt2sas/mpi/mpi2_init.h b/drivers/scsi/mpt2sas/mpi/mpi2_init.h new file mode 100644 index 0000000..f1115f0 --- /dev/null +++ b/drivers/scsi/mpt2sas/mpi/mpi2_init.h @@ -0,0 +1,420 @@ +/* + * Copyright (c) 2000-2008 LSI Corporation. + * + * + * Name: mpi2_init.h + * Title: MPI SCSI initiator mode messages and structures + * Creation Date: June 23, 2006 + * + * mpi2_init.h Version: 02.00.06 + * + * Version History + * --------------- + * + * Date Version Description + * -------- -------- ------------------------------------------------------ + * 04-30-07 02.00.00 Corresponds to Fusion-MPT MPI Specification Rev A. + * 10-31-07 02.00.01 Fixed name for pMpi2SCSITaskManagementRequest_t. + * 12-18-07 02.00.02 Modified Task Management Target Reset Method defines. + * 02-29-08 02.00.03 Added Query Task Set and Query Unit Attention. + * 03-03-08 02.00.04 Fixed name of struct _MPI2_SCSI_TASK_MANAGE_REPLY. + * 05-21-08 02.00.05 Fixed typo in name of Mpi2SepRequest_t. + * 10-02-08 02.00.06 Removed Untagged and No Disconnect values from SCSI IO + * Control field Task Attribute flags. + * Moved LUN field defines to mpi2.h becasue they are + * common to many structures. + * -------------------------------------------------------------------------- + */ + +#ifndef MPI2_INIT_H +#define MPI2_INIT_H + +/***************************************************************************** +* +* SCSI Initiator Messages +* +*****************************************************************************/ + +/**************************************************************************** +* SCSI IO messages and associated structures +****************************************************************************/ + +typedef struct +{ + U8 CDB[20]; /* 0x00 */ + U32 PrimaryReferenceTag; /* 0x14 */ + U16 PrimaryApplicationTag; /* 0x18 */ + U16 PrimaryApplicationTagMask; /* 0x1A */ + U32 TransferLength; /* 0x1C */ +} MPI2_SCSI_IO_CDB_EEDP32, MPI2_POINTER PTR_MPI2_SCSI_IO_CDB_EEDP32, + Mpi2ScsiIoCdbEedp32_t, MPI2_POINTER pMpi2ScsiIoCdbEedp32_t; + +/* TBD: I don't think this is needed for MPI2/Gen2 */ +#if 0 +typedef struct +{ + U8 CDB[16]; /* 0x00 */ + U32 DataLength; /* 0x10 */ + U32 PrimaryReferenceTag; /* 0x14 */ + U16 PrimaryApplicationTag; /* 0x18 */ + U16 PrimaryApplicationTagMask; /* 0x1A */ + U32 TransferLength; /* 0x1C */ +} MPI2_SCSI_IO32_CDB_EEDP16, MPI2_POINTER PTR_MPI2_SCSI_IO32_CDB_EEDP16, + Mpi2ScsiIo32CdbEedp16_t, MPI2_POINTER pMpi2ScsiIo32CdbEedp16_t; +#endif + +typedef union +{ + U8 CDB32[32]; + MPI2_SCSI_IO_CDB_EEDP32 EEDP32; + MPI2_SGE_SIMPLE_UNION SGE; +} MPI2_SCSI_IO_CDB_UNION, MPI2_POINTER PTR_MPI2_SCSI_IO_CDB_UNION, + Mpi2ScsiIoCdb_t, MPI2_POINTER pMpi2ScsiIoCdb_t; + +/* SCSI IO Request Message */ +typedef struct _MPI2_SCSI_IO_REQUEST +{ + U16 DevHandle; /* 0x00 */ + U8 ChainOffset; /* 0x02 */ + U8 Function; /* 0x03 */ + U16 Reserved1; /* 0x04 */ + U8 Reserved2; /* 0x06 */ + U8 MsgFlags; /* 0x07 */ + U8 VP_ID; /* 0x08 */ + U8 VF_ID; /* 0x09 */ + U16 Reserved3; /* 0x0A */ + U32 SenseBufferLowAddress; /* 0x0C */ + U16 SGLFlags; /* 0x10 */ + U8 SenseBufferLength; /* 0x12 */ + U8 Reserved4; /* 0x13 */ + U8 SGLOffset0; /* 0x14 */ + U8 SGLOffset1; /* 0x15 */ + U8 SGLOffset2; /* 0x16 */ + U8 SGLOffset3; /* 0x17 */ + U32 SkipCount; /* 0x18 */ + U32 DataLength; /* 0x1C */ + U32 BidirectionalDataLength; /* 0x20 */ + U16 IoFlags; /* 0x24 */ + U16 EEDPFlags; /* 0x26 */ + U32 EEDPBlockSize; /* 0x28 */ + U32 SecondaryReferenceTag; /* 0x2C */ + U16 SecondaryApplicationTag; /* 0x30 */ + U16 ApplicationTagTranslationMask; /* 0x32 */ + U8 LUN[8]; /* 0x34 */ + U32 Control; /* 0x3C */ + MPI2_SCSI_IO_CDB_UNION CDB; /* 0x40 */ + MPI2_SGE_IO_UNION SGL; /* 0x60 */ +} MPI2_SCSI_IO_REQUEST, MPI2_POINTER PTR_MPI2_SCSI_IO_REQUEST, + Mpi2SCSIIORequest_t, MPI2_POINTER pMpi2SCSIIORequest_t; + +/* SCSI IO MsgFlags bits */ + +/* MsgFlags for SenseBufferAddressSpace */ +#define MPI2_SCSIIO_MSGFLAGS_MASK_SENSE_ADDR (0x0C) +#define MPI2_SCSIIO_MSGFLAGS_SYSTEM_SENSE_ADDR (0x00) +#define MPI2_SCSIIO_MSGFLAGS_IOCDDR_SENSE_ADDR (0x04) +#define MPI2_SCSIIO_MSGFLAGS_IOCPLB_SENSE_ADDR (0x08) +#define MPI2_SCSIIO_MSGFLAGS_IOCPLBNTA_SENSE_ADDR (0x0C) + +/* SCSI IO SGLFlags bits */ + +/* base values for Data Location Address Space */ +#define MPI2_SCSIIO_SGLFLAGS_ADDR_MASK (0x0C) +#define MPI2_SCSIIO_SGLFLAGS_SYSTEM_ADDR (0x00) +#define MPI2_SCSIIO_SGLFLAGS_IOCDDR_ADDR (0x04) +#define MPI2_SCSIIO_SGLFLAGS_IOCPLB_ADDR (0x08) +#define MPI2_SCSIIO_SGLFLAGS_IOCPLBNTA_ADDR (0x0C) + +/* base values for Type */ +#define MPI2_SCSIIO_SGLFLAGS_TYPE_MASK (0x03) +#define MPI2_SCSIIO_SGLFLAGS_TYPE_MPI (0x00) +#define MPI2_SCSIIO_SGLFLAGS_TYPE_IEEE32 (0x01) +#define MPI2_SCSIIO_SGLFLAGS_TYPE_IEEE64 (0x02) + +/* shift values for each sub-field */ +#define MPI2_SCSIIO_SGLFLAGS_SGL3_SHIFT (12) +#define MPI2_SCSIIO_SGLFLAGS_SGL2_SHIFT (8) +#define MPI2_SCSIIO_SGLFLAGS_SGL1_SHIFT (4) +#define MPI2_SCSIIO_SGLFLAGS_SGL0_SHIFT (0) + +/* SCSI IO IoFlags bits */ + +/* Large CDB Address Space */ +#define MPI2_SCSIIO_CDB_ADDR_MASK (0x6000) +#define MPI2_SCSIIO_CDB_ADDR_SYSTEM (0x0000) +#define MPI2_SCSIIO_CDB_ADDR_IOCDDR (0x2000) +#define MPI2_SCSIIO_CDB_ADDR_IOCPLB (0x4000) +#define MPI2_SCSIIO_CDB_ADDR_IOCPLBNTA (0x6000) + +#define MPI2_SCSIIO_IOFLAGS_LARGE_CDB (0x1000) +#define MPI2_SCSIIO_IOFLAGS_BIDIRECTIONAL (0x0800) +#define MPI2_SCSIIO_IOFLAGS_MULTICAST (0x0400) +#define MPI2_SCSIIO_IOFLAGS_CMD_DETERMINES_DATA_DIR (0x0200) +#define MPI2_SCSIIO_IOFLAGS_CDBLENGTH_MASK (0x01FF) + +/* SCSI IO EEDPFlags bits */ + +#define MPI2_SCSIIO_EEDPFLAGS_INC_PRI_REFTAG (0x8000) +#define MPI2_SCSIIO_EEDPFLAGS_INC_SEC_REFTAG (0x4000) +#define MPI2_SCSIIO_EEDPFLAGS_INC_PRI_APPTAG (0x2000) +#define MPI2_SCSIIO_EEDPFLAGS_INC_SEC_APPTAG (0x1000) + +#define MPI2_SCSIIO_EEDPFLAGS_CHECK_REFTAG (0x0400) +#define MPI2_SCSIIO_EEDPFLAGS_CHECK_APPTAG (0x0200) +#define MPI2_SCSIIO_EEDPFLAGS_CHECK_GUARD (0x0100) + +#define MPI2_SCSIIO_EEDPFLAGS_PASSTHRU_REFTAG (0x0008) + +#define MPI2_SCSIIO_EEDPFLAGS_MASK_OP (0x0007) +#define MPI2_SCSIIO_EEDPFLAGS_NOOP_OP (0x0000) +#define MPI2_SCSIIO_EEDPFLAGS_CHECK_OP (0x0001) +#define MPI2_SCSIIO_EEDPFLAGS_STRIP_OP (0x0002) +#define MPI2_SCSIIO_EEDPFLAGS_CHECK_REMOVE_OP (0x0003) +#define MPI2_SCSIIO_EEDPFLAGS_INSERT_OP (0x0004) +#define MPI2_SCSIIO_EEDPFLAGS_REPLACE_OP (0x0006) +#define MPI2_SCSIIO_EEDPFLAGS_CHECK_REGEN_OP (0x0007) + +/* SCSI IO LUN fields: use MPI2_LUN_ from mpi2.h */ + +/* SCSI IO Control bits */ +#define MPI2_SCSIIO_CONTROL_ADDCDBLEN_MASK (0xFC000000) +#define MPI2_SCSIIO_CONTROL_ADDCDBLEN_SHIFT (26) + +#define MPI2_SCSIIO_CONTROL_DATADIRECTION_MASK (0x03000000) +#define MPI2_SCSIIO_CONTROL_NODATATRANSFER (0x00000000) +#define MPI2_SCSIIO_CONTROL_WRITE (0x01000000) +#define MPI2_SCSIIO_CONTROL_READ (0x02000000) +#define MPI2_SCSIIO_CONTROL_BIDIRECTIONAL (0x03000000) + +#define MPI2_SCSIIO_CONTROL_TASKPRI_MASK (0x00007800) +#define MPI2_SCSIIO_CONTROL_TASKPRI_SHIFT (11) + +#define MPI2_SCSIIO_CONTROL_TASKATTRIBUTE_MASK (0x00000700) +#define MPI2_SCSIIO_CONTROL_SIMPLEQ (0x00000000) +#define MPI2_SCSIIO_CONTROL_HEADOFQ (0x00000100) +#define MPI2_SCSIIO_CONTROL_ORDEREDQ (0x00000200) +#define MPI2_SCSIIO_CONTROL_ACAQ (0x00000400) + +#define MPI2_SCSIIO_CONTROL_TLR_MASK (0x000000C0) +#define MPI2_SCSIIO_CONTROL_NO_TLR (0x00000000) +#define MPI2_SCSIIO_CONTROL_TLR_ON (0x00000040) +#define MPI2_SCSIIO_CONTROL_TLR_OFF (0x00000080) + + +/* SCSI IO Error Reply Message */ +typedef struct _MPI2_SCSI_IO_REPLY +{ + U16 DevHandle; /* 0x00 */ + U8 MsgLength; /* 0x02 */ + U8 Function; /* 0x03 */ + U16 Reserved1; /* 0x04 */ + U8 Reserved2; /* 0x06 */ + U8 MsgFlags; /* 0x07 */ + U8 VP_ID; /* 0x08 */ + U8 VF_ID; /* 0x09 */ + U16 Reserved3; /* 0x0A */ + U8 SCSIStatus; /* 0x0C */ + U8 SCSIState; /* 0x0D */ + U16 IOCStatus; /* 0x0E */ + U32 IOCLogInfo; /* 0x10 */ + U32 TransferCount; /* 0x14 */ + U32 SenseCount; /* 0x18 */ + U32 ResponseInfo; /* 0x1C */ + U16 TaskTag; /* 0x20 */ + U16 Reserved4; /* 0x22 */ + U32 BidirectionalTransferCount; /* 0x24 */ + U32 Reserved5; /* 0x28 */ + U32 Reserved6; /* 0x2C */ +} MPI2_SCSI_IO_REPLY, MPI2_POINTER PTR_MPI2_SCSI_IO_REPLY, + Mpi2SCSIIOReply_t, MPI2_POINTER pMpi2SCSIIOReply_t; + +/* SCSI IO Reply SCSIStatus values (SAM-4 status codes) */ + +#define MPI2_SCSI_STATUS_GOOD (0x00) +#define MPI2_SCSI_STATUS_CHECK_CONDITION (0x02) +#define MPI2_SCSI_STATUS_CONDITION_MET (0x04) +#define MPI2_SCSI_STATUS_BUSY (0x08) +#define MPI2_SCSI_STATUS_INTERMEDIATE (0x10) +#define MPI2_SCSI_STATUS_INTERMEDIATE_CONDMET (0x14) +#define MPI2_SCSI_STATUS_RESERVATION_CONFLICT (0x18) +#define MPI2_SCSI_STATUS_COMMAND_TERMINATED (0x22) /* obsolete */ +#define MPI2_SCSI_STATUS_TASK_SET_FULL (0x28) +#define MPI2_SCSI_STATUS_ACA_ACTIVE (0x30) +#define MPI2_SCSI_STATUS_TASK_ABORTED (0x40) + +/* SCSI IO Reply SCSIState flags */ + +#define MPI2_SCSI_STATE_RESPONSE_INFO_VALID (0x10) +#define MPI2_SCSI_STATE_TERMINATED (0x08) +#define MPI2_SCSI_STATE_NO_SCSI_STATUS (0x04) +#define MPI2_SCSI_STATE_AUTOSENSE_FAILED (0x02) +#define MPI2_SCSI_STATE_AUTOSENSE_VALID (0x01) + +#define MPI2_SCSI_TASKTAG_UNKNOWN (0xFFFF) + + +/**************************************************************************** +* SCSI Task Management messages +****************************************************************************/ + +/* SCSI Task Management Request Message */ +typedef struct _MPI2_SCSI_TASK_MANAGE_REQUEST +{ + U16 DevHandle; /* 0x00 */ + U8 ChainOffset; /* 0x02 */ + U8 Function; /* 0x03 */ + U8 Reserved1; /* 0x04 */ + U8 TaskType; /* 0x05 */ + U8 Reserved2; /* 0x06 */ + U8 MsgFlags; /* 0x07 */ + U8 VP_ID; /* 0x08 */ + U8 VF_ID; /* 0x09 */ + U16 Reserved3; /* 0x0A */ + U8 LUN[8]; /* 0x0C */ + U32 Reserved4[7]; /* 0x14 */ + U16 TaskMID; /* 0x30 */ + U16 Reserved5; /* 0x32 */ +} MPI2_SCSI_TASK_MANAGE_REQUEST, + MPI2_POINTER PTR_MPI2_SCSI_TASK_MANAGE_REQUEST, + Mpi2SCSITaskManagementRequest_t, + MPI2_POINTER pMpi2SCSITaskManagementRequest_t; + +/* TaskType values */ + +#define MPI2_SCSITASKMGMT_TASKTYPE_ABORT_TASK (0x01) +#define MPI2_SCSITASKMGMT_TASKTYPE_ABRT_TASK_SET (0x02) +#define MPI2_SCSITASKMGMT_TASKTYPE_TARGET_RESET (0x03) +#define MPI2_SCSITASKMGMT_TASKTYPE_LOGICAL_UNIT_RESET (0x05) +#define MPI2_SCSITASKMGMT_TASKTYPE_CLEAR_TASK_SET (0x06) +#define MPI2_SCSITASKMGMT_TASKTYPE_QUERY_TASK (0x07) +#define MPI2_SCSITASKMGMT_TASKTYPE_CLR_ACA (0x08) +#define MPI2_SCSITASKMGMT_TASKTYPE_QRY_TASK_SET (0x09) +#define MPI2_SCSITASKMGMT_TASKTYPE_QRY_UNIT_ATTENTION (0x0A) + +/* MsgFlags bits */ + +#define MPI2_SCSITASKMGMT_MSGFLAGS_MASK_TARGET_RESET (0x18) +#define MPI2_SCSITASKMGMT_MSGFLAGS_LINK_RESET (0x00) +#define MPI2_SCSITASKMGMT_MSGFLAGS_NEXUS_RESET_SRST (0x08) +#define MPI2_SCSITASKMGMT_MSGFLAGS_SAS_HARD_LINK_RESET (0x10) + +#define MPI2_SCSITASKMGMT_MSGFLAGS_DO_NOT_SEND_TASK_IU (0x01) + + + +/* SCSI Task Management Reply Message */ +typedef struct _MPI2_SCSI_TASK_MANAGE_REPLY +{ + U16 DevHandle; /* 0x00 */ + U8 MsgLength; /* 0x02 */ + U8 Function; /* 0x03 */ + U8 ResponseCode; /* 0x04 */ + U8 TaskType; /* 0x05 */ + U8 Reserved1; /* 0x06 */ + U8 MsgFlags; /* 0x07 */ + U8 VP_ID; /* 0x08 */ + U8 VF_ID; /* 0x09 */ + U16 Reserved2; /* 0x0A */ + U16 Reserved3; /* 0x0C */ + U16 IOCStatus; /* 0x0E */ + U32 IOCLogInfo; /* 0x10 */ + U32 TerminationCount; /* 0x14 */ +} MPI2_SCSI_TASK_MANAGE_REPLY, + MPI2_POINTER PTR_MPI2_SCSI_TASK_MANAGE_REPLY, + Mpi2SCSITaskManagementReply_t, MPI2_POINTER pMpi2SCSIManagementReply_t; + +/* ResponseCode values */ + +#define MPI2_SCSITASKMGMT_RSP_TM_COMPLETE (0x00) +#define MPI2_SCSITASKMGMT_RSP_INVALID_FRAME (0x02) +#define MPI2_SCSITASKMGMT_RSP_TM_NOT_SUPPORTED (0x04) +#define MPI2_SCSITASKMGMT_RSP_TM_FAILED (0x05) +#define MPI2_SCSITASKMGMT_RSP_TM_SUCCEEDED (0x08) +#define MPI2_SCSITASKMGMT_RSP_TM_INVALID_LUN (0x09) +#define MPI2_SCSITASKMGMT_RSP_IO_QUEUED_ON_IOC (0x80) + + +/**************************************************************************** +* SCSI Enclosure Processor messages +****************************************************************************/ + +/* SCSI Enclosure Processor Request Message */ +typedef struct _MPI2_SEP_REQUEST +{ + U16 DevHandle; /* 0x00 */ + U8 ChainOffset; /* 0x02 */ + U8 Function; /* 0x03 */ + U8 Action; /* 0x04 */ + U8 Flags; /* 0x05 */ + U8 Reserved1; /* 0x06 */ + U8 MsgFlags; /* 0x07 */ + U8 VP_ID; /* 0x08 */ + U8 VF_ID; /* 0x09 */ + U16 Reserved2; /* 0x0A */ + U32 SlotStatus; /* 0x0C */ + U32 Reserved3; /* 0x10 */ + U32 Reserved4; /* 0x14 */ + U32 Reserved5; /* 0x18 */ + U16 Slot; /* 0x1C */ + U16 EnclosureHandle; /* 0x1E */ +} MPI2_SEP_REQUEST, MPI2_POINTER PTR_MPI2_SEP_REQUEST, + Mpi2SepRequest_t, MPI2_POINTER pMpi2SepRequest_t; + +/* Action defines */ +#define MPI2_SEP_REQ_ACTION_WRITE_STATUS (0x00) +#define MPI2_SEP_REQ_ACTION_READ_STATUS (0x01) + +/* Flags defines */ +#define MPI2_SEP_REQ_FLAGS_DEVHANDLE_ADDRESS (0x00) +#define MPI2_SEP_REQ_FLAGS_ENCLOSURE_SLOT_ADDRESS (0x01) + +/* SlotStatus defines */ +#define MPI2_SEP_REQ_SLOTSTATUS_REQUEST_REMOVE (0x00040000) +#define MPI2_SEP_REQ_SLOTSTATUS_IDENTIFY_REQUEST (0x00020000) +#define MPI2_SEP_REQ_SLOTSTATUS_REBUILD_STOPPED (0x00000200) +#define MPI2_SEP_REQ_SLOTSTATUS_HOT_SPARE (0x00000100) +#define MPI2_SEP_REQ_SLOTSTATUS_UNCONFIGURED (0x00000080) +#define MPI2_SEP_REQ_SLOTSTATUS_PREDICTED_FAULT (0x00000040) +#define MPI2_SEP_REQ_SLOTSTATUS_DEV_REBUILDING (0x00000004) +#define MPI2_SEP_REQ_SLOTSTATUS_DEV_FAULTY (0x00000002) +#define MPI2_SEP_REQ_SLOTSTATUS_NO_ERROR (0x00000001) + + +/* SCSI Enclosure Processor Reply Message */ +typedef struct _MPI2_SEP_REPLY +{ + U16 DevHandle; /* 0x00 */ + U8 MsgLength; /* 0x02 */ + U8 Function; /* 0x03 */ + U8 Action; /* 0x04 */ + U8 Flags; /* 0x05 */ + U8 Reserved1; /* 0x06 */ + U8 MsgFlags; /* 0x07 */ + U8 VP_ID; /* 0x08 */ + U8 VF_ID; /* 0x09 */ + U16 Reserved2; /* 0x0A */ + U16 Reserved3; /* 0x0C */ + U16 IOCStatus; /* 0x0E */ + U32 IOCLogInfo; /* 0x10 */ + U32 SlotStatus; /* 0x14 */ + U32 Reserved4; /* 0x18 */ + U16 Slot; /* 0x1C */ + U16 EnclosureHandle; /* 0x1E */ +} MPI2_SEP_REPLY, MPI2_POINTER PTR_MPI2_SEP_REPLY, + Mpi2SepReply_t, MPI2_POINTER pMpi2SepReply_t; + +/* SlotStatus defines */ +#define MPI2_SEP_REPLY_SLOTSTATUS_REMOVE_READY (0x00040000) +#define MPI2_SEP_REPLY_SLOTSTATUS_IDENTIFY_REQUEST (0x00020000) +#define MPI2_SEP_REPLY_SLOTSTATUS_REBUILD_STOPPED (0x00000200) +#define MPI2_SEP_REPLY_SLOTSTATUS_HOT_SPARE (0x00000100) +#define MPI2_SEP_REPLY_SLOTSTATUS_UNCONFIGURED (0x00000080) +#define MPI2_SEP_REPLY_SLOTSTATUS_PREDICTED_FAULT (0x00000040) +#define MPI2_SEP_REPLY_SLOTSTATUS_DEV_REBUILDING (0x00000004) +#define MPI2_SEP_REPLY_SLOTSTATUS_DEV_FAULTY (0x00000002) +#define MPI2_SEP_REPLY_SLOTSTATUS_NO_ERROR (0x00000001) + + +#endif + + diff --git a/drivers/scsi/mpt2sas/mpi/mpi2_ioc.h b/drivers/scsi/mpt2sas/mpi/mpi2_ioc.h new file mode 100644 index 0000000..8c5d818 --- /dev/null +++ b/drivers/scsi/mpt2sas/mpi/mpi2_ioc.h @@ -0,0 +1,1295 @@ +/* + * Copyright (c) 2000-2009 LSI Corporation. + * + * + * Name: mpi2_ioc.h + * Title: MPI IOC, Port, Event, FW Download, and FW Upload messages + * Creation Date: October 11, 2006 + * + * mpi2_ioc.h Version: 02.00.10 + * + * Version History + * --------------- + * + * Date Version Description + * -------- -------- ------------------------------------------------------ + * 04-30-07 02.00.00 Corresponds to Fusion-MPT MPI Specification Rev A. + * 06-04-07 02.00.01 In IOCFacts Reply structure, renamed MaxDevices to + * MaxTargets. + * Added TotalImageSize field to FWDownload Request. + * Added reserved words to FWUpload Request. + * 06-26-07 02.00.02 Added IR Configuration Change List Event. + * 08-31-07 02.00.03 Removed SystemReplyQueueDepth field from the IOCInit + * request and replaced it with + * ReplyDescriptorPostQueueDepth and ReplyFreeQueueDepth. + * Replaced the MinReplyQueueDepth field of the IOCFacts + * reply with MaxReplyDescriptorPostQueueDepth. + * Added MPI2_RDPQ_DEPTH_MIN define to specify the minimum + * depth for the Reply Descriptor Post Queue. + * Added SASAddress field to Initiator Device Table + * Overflow Event data. + * 10-31-07 02.00.04 Added ReasonCode MPI2_EVENT_SAS_INIT_RC_NOT_RESPONDING + * for SAS Initiator Device Status Change Event data. + * Modified Reason Code defines for SAS Topology Change + * List Event data, including adding a bit for PHY Vacant + * status, and adding a mask for the Reason Code. + * Added define for + * MPI2_EVENT_SAS_TOPO_ES_DELAY_NOT_RESPONDING. + * Added define for MPI2_EXT_IMAGE_TYPE_MEGARAID. + * 12-18-07 02.00.05 Added Boot Status defines for the IOCExceptions field of + * the IOCFacts Reply. + * Removed MPI2_IOCFACTS_CAPABILITY_EXTENDED_BUFFER define. + * Moved MPI2_VERSION_UNION to mpi2.h. + * Changed MPI2_EVENT_NOTIFICATION_REQUEST to use masks + * instead of enables, and added SASBroadcastPrimitiveMasks + * field. + * Added Log Entry Added Event and related structure. + * 02-29-08 02.00.06 Added define MPI2_IOCFACTS_CAPABILITY_INTEGRATED_RAID. + * Removed define MPI2_IOCFACTS_PROTOCOL_SMP_TARGET. + * Added MaxVolumes and MaxPersistentEntries fields to + * IOCFacts reply. + * Added ProtocalFlags and IOCCapabilities fields to + * MPI2_FW_IMAGE_HEADER. + * Removed MPI2_PORTENABLE_FLAGS_ENABLE_SINGLE_PORT. + * 03-03-08 02.00.07 Fixed MPI2_FW_IMAGE_HEADER by changing Reserved26 to + * a U16 (from a U32). + * Removed extra 's' from EventMasks name. + * 06-27-08 02.00.08 Fixed an offset in a comment. + * 10-02-08 02.00.09 Removed SystemReplyFrameSize from MPI2_IOC_INIT_REQUEST. + * Removed CurReplyFrameSize from MPI2_IOC_FACTS_REPLY and + * renamed MinReplyFrameSize to ReplyFrameSize. + * Added MPI2_IOCFACTS_EXCEPT_IR_FOREIGN_CONFIG_MAX. + * Added two new RAIDOperation values for Integrated RAID + * Operations Status Event data. + * Added four new IR Configuration Change List Event data + * ReasonCode values. + * Added two new ReasonCode defines for SAS Device Status + * Change Event data. + * Added three new DiscoveryStatus bits for the SAS + * Discovery event data. + * Added Multiplexing Status Change bit to the PhyStatus + * field of the SAS Topology Change List event data. + * Removed define for MPI2_INIT_IMAGE_BOOTFLAGS_XMEMCOPY. + * BootFlags are now product-specific. + * Added defines for the indivdual signature bytes + * for MPI2_INIT_IMAGE_FOOTER. + * 01-19-09 02.00.10 Added MPI2_IOCFACTS_CAPABILITY_EVENT_REPLAY define. + * Added MPI2_EVENT_SAS_DISC_DS_DOWNSTREAM_INITIATOR + * define. + * Added MPI2_EVENT_SAS_DEV_STAT_RC_SATA_INIT_FAILURE + * define. + * Removed MPI2_EVENT_SAS_DISC_DS_SATA_INIT_FAILURE define. + * -------------------------------------------------------------------------- + */ + +#ifndef MPI2_IOC_H +#define MPI2_IOC_H + +/***************************************************************************** +* +* IOC Messages +* +*****************************************************************************/ + +/**************************************************************************** +* IOCInit message +****************************************************************************/ + +/* IOCInit Request message */ +typedef struct _MPI2_IOC_INIT_REQUEST +{ + U8 WhoInit; /* 0x00 */ + U8 Reserved1; /* 0x01 */ + U8 ChainOffset; /* 0x02 */ + U8 Function; /* 0x03 */ + U16 Reserved2; /* 0x04 */ + U8 Reserved3; /* 0x06 */ + U8 MsgFlags; /* 0x07 */ + U8 VP_ID; /* 0x08 */ + U8 VF_ID; /* 0x09 */ + U16 Reserved4; /* 0x0A */ + U16 MsgVersion; /* 0x0C */ + U16 HeaderVersion; /* 0x0E */ + U32 Reserved5; /* 0x10 */ + U32 Reserved6; /* 0x14 */ + U16 Reserved7; /* 0x18 */ + U16 SystemRequestFrameSize; /* 0x1A */ + U16 ReplyDescriptorPostQueueDepth; /* 0x1C */ + U16 ReplyFreeQueueDepth; /* 0x1E */ + U32 SenseBufferAddressHigh; /* 0x20 */ + U32 SystemReplyAddressHigh; /* 0x24 */ + U64 SystemRequestFrameBaseAddress; /* 0x28 */ + U64 ReplyDescriptorPostQueueAddress;/* 0x30 */ + U64 ReplyFreeQueueAddress; /* 0x38 */ + U64 TimeStamp; /* 0x40 */ +} MPI2_IOC_INIT_REQUEST, MPI2_POINTER PTR_MPI2_IOC_INIT_REQUEST, + Mpi2IOCInitRequest_t, MPI2_POINTER pMpi2IOCInitRequest_t; + +/* WhoInit values */ +#define MPI2_WHOINIT_NOT_INITIALIZED (0x00) +#define MPI2_WHOINIT_SYSTEM_BIOS (0x01) +#define MPI2_WHOINIT_ROM_BIOS (0x02) +#define MPI2_WHOINIT_PCI_PEER (0x03) +#define MPI2_WHOINIT_HOST_DRIVER (0x04) +#define MPI2_WHOINIT_MANUFACTURER (0x05) + +/* MsgVersion */ +#define MPI2_IOCINIT_MSGVERSION_MAJOR_MASK (0xFF00) +#define MPI2_IOCINIT_MSGVERSION_MAJOR_SHIFT (8) +#define MPI2_IOCINIT_MSGVERSION_MINOR_MASK (0x00FF) +#define MPI2_IOCINIT_MSGVERSION_MINOR_SHIFT (0) + +/* HeaderVersion */ +#define MPI2_IOCINIT_HDRVERSION_UNIT_MASK (0xFF00) +#define MPI2_IOCINIT_HDRVERSION_UNIT_SHIFT (8) +#define MPI2_IOCINIT_HDRVERSION_DEV_MASK (0x00FF) +#define MPI2_IOCINIT_HDRVERSION_DEV_SHIFT (0) + +/* minimum depth for the Reply Descriptor Post Queue */ +#define MPI2_RDPQ_DEPTH_MIN (16) + + +/* IOCInit Reply message */ +typedef struct _MPI2_IOC_INIT_REPLY +{ + U8 WhoInit; /* 0x00 */ + U8 Reserved1; /* 0x01 */ + U8 MsgLength; /* 0x02 */ + U8 Function; /* 0x03 */ + U16 Reserved2; /* 0x04 */ + U8 Reserved3; /* 0x06 */ + U8 MsgFlags; /* 0x07 */ + U8 VP_ID; /* 0x08 */ + U8 VF_ID; /* 0x09 */ + U16 Reserved4; /* 0x0A */ + U16 Reserved5; /* 0x0C */ + U16 IOCStatus; /* 0x0E */ + U32 IOCLogInfo; /* 0x10 */ +} MPI2_IOC_INIT_REPLY, MPI2_POINTER PTR_MPI2_IOC_INIT_REPLY, + Mpi2IOCInitReply_t, MPI2_POINTER pMpi2IOCInitReply_t; + + +/**************************************************************************** +* IOCFacts message +****************************************************************************/ + +/* IOCFacts Request message */ +typedef struct _MPI2_IOC_FACTS_REQUEST +{ + U16 Reserved1; /* 0x00 */ + U8 ChainOffset; /* 0x02 */ + U8 Function; /* 0x03 */ + U16 Reserved2; /* 0x04 */ + U8 Reserved3; /* 0x06 */ + U8 MsgFlags; /* 0x07 */ + U8 VP_ID; /* 0x08 */ + U8 VF_ID; /* 0x09 */ + U16 Reserved4; /* 0x0A */ +} MPI2_IOC_FACTS_REQUEST, MPI2_POINTER PTR_MPI2_IOC_FACTS_REQUEST, + Mpi2IOCFactsRequest_t, MPI2_POINTER pMpi2IOCFactsRequest_t; + + +/* IOCFacts Reply message */ +typedef struct _MPI2_IOC_FACTS_REPLY +{ + U16 MsgVersion; /* 0x00 */ + U8 MsgLength; /* 0x02 */ + U8 Function; /* 0x03 */ + U16 HeaderVersion; /* 0x04 */ + U8 IOCNumber; /* 0x06 */ + U8 MsgFlags; /* 0x07 */ + U8 VP_ID; /* 0x08 */ + U8 VF_ID; /* 0x09 */ + U16 Reserved1; /* 0x0A */ + U16 IOCExceptions; /* 0x0C */ + U16 IOCStatus; /* 0x0E */ + U32 IOCLogInfo; /* 0x10 */ + U8 MaxChainDepth; /* 0x14 */ + U8 WhoInit; /* 0x15 */ + U8 NumberOfPorts; /* 0x16 */ + U8 Reserved2; /* 0x17 */ + U16 RequestCredit; /* 0x18 */ + U16 ProductID; /* 0x1A */ + U32 IOCCapabilities; /* 0x1C */ + MPI2_VERSION_UNION FWVersion; /* 0x20 */ + U16 IOCRequestFrameSize; /* 0x24 */ + U16 Reserved3; /* 0x26 */ + U16 MaxInitiators; /* 0x28 */ + U16 MaxTargets; /* 0x2A */ + U16 MaxSasExpanders; /* 0x2C */ + U16 MaxEnclosures; /* 0x2E */ + U16 ProtocolFlags; /* 0x30 */ + U16 HighPriorityCredit; /* 0x32 */ + U16 MaxReplyDescriptorPostQueueDepth; /* 0x34 */ + U8 ReplyFrameSize; /* 0x36 */ + U8 MaxVolumes; /* 0x37 */ + U16 MaxDevHandle; /* 0x38 */ + U16 MaxPersistentEntries; /* 0x3A */ + U32 Reserved4; /* 0x3C */ +} MPI2_IOC_FACTS_REPLY, MPI2_POINTER PTR_MPI2_IOC_FACTS_REPLY, + Mpi2IOCFactsReply_t, MPI2_POINTER pMpi2IOCFactsReply_t; + +/* MsgVersion */ +#define MPI2_IOCFACTS_MSGVERSION_MAJOR_MASK (0xFF00) +#define MPI2_IOCFACTS_MSGVERSION_MAJOR_SHIFT (8) +#define MPI2_IOCFACTS_MSGVERSION_MINOR_MASK (0x00FF) +#define MPI2_IOCFACTS_MSGVERSION_MINOR_SHIFT (0) + +/* HeaderVersion */ +#define MPI2_IOCFACTS_HDRVERSION_UNIT_MASK (0xFF00) +#define MPI2_IOCFACTS_HDRVERSION_UNIT_SHIFT (8) +#define MPI2_IOCFACTS_HDRVERSION_DEV_MASK (0x00FF) +#define MPI2_IOCFACTS_HDRVERSION_DEV_SHIFT (0) + +/* IOCExceptions */ +#define MPI2_IOCFACTS_EXCEPT_IR_FOREIGN_CONFIG_MAX (0x0100) + +#define MPI2_IOCFACTS_EXCEPT_BOOTSTAT_MASK (0x00E0) +#define MPI2_IOCFACTS_EXCEPT_BOOTSTAT_GOOD (0x0000) +#define MPI2_IOCFACTS_EXCEPT_BOOTSTAT_BACKUP (0x0020) +#define MPI2_IOCFACTS_EXCEPT_BOOTSTAT_RESTORED (0x0040) +#define MPI2_IOCFACTS_EXCEPT_BOOTSTAT_CORRUPT_BACKUP (0x0060) + +#define MPI2_IOCFACTS_EXCEPT_METADATA_UNSUPPORTED (0x0010) +#define MPI2_IOCFACTS_EXCEPT_MANUFACT_CHECKSUM_FAIL (0x0008) +#define MPI2_IOCFACTS_EXCEPT_FW_CHECKSUM_FAIL (0x0004) +#define MPI2_IOCFACTS_EXCEPT_RAID_CONFIG_INVALID (0x0002) +#define MPI2_IOCFACTS_EXCEPT_CONFIG_CHECKSUM_FAIL (0x0001) + +/* defines for WhoInit field are after the IOCInit Request */ + +/* ProductID field uses MPI2_FW_HEADER_PID_ */ + +/* IOCCapabilities */ +#define MPI2_IOCFACTS_CAPABILITY_EVENT_REPLAY (0x00002000) +#define MPI2_IOCFACTS_CAPABILITY_INTEGRATED_RAID (0x00001000) +#define MPI2_IOCFACTS_CAPABILITY_TLR (0x00000800) +#define MPI2_IOCFACTS_CAPABILITY_MULTICAST (0x00000100) +#define MPI2_IOCFACTS_CAPABILITY_BIDIRECTIONAL_TARGET (0x00000080) +#define MPI2_IOCFACTS_CAPABILITY_EEDP (0x00000040) +#define MPI2_IOCFACTS_CAPABILITY_SNAPSHOT_BUFFER (0x00000010) +#define MPI2_IOCFACTS_CAPABILITY_DIAG_TRACE_BUFFER (0x00000008) +#define MPI2_IOCFACTS_CAPABILITY_TASK_SET_FULL_HANDLING (0x00000004) + +/* ProtocolFlags */ +#define MPI2_IOCFACTS_PROTOCOL_SCSI_TARGET (0x0001) +#define MPI2_IOCFACTS_PROTOCOL_SCSI_INITIATOR (0x0002) + + +/**************************************************************************** +* PortFacts message +****************************************************************************/ + +/* PortFacts Request message */ +typedef struct _MPI2_PORT_FACTS_REQUEST +{ + U16 Reserved1; /* 0x00 */ + U8 ChainOffset; /* 0x02 */ + U8 Function; /* 0x03 */ + U16 Reserved2; /* 0x04 */ + U8 PortNumber; /* 0x06 */ + U8 MsgFlags; /* 0x07 */ + U8 VP_ID; /* 0x08 */ + U8 VF_ID; /* 0x09 */ + U16 Reserved3; /* 0x0A */ +} MPI2_PORT_FACTS_REQUEST, MPI2_POINTER PTR_MPI2_PORT_FACTS_REQUEST, + Mpi2PortFactsRequest_t, MPI2_POINTER pMpi2PortFactsRequest_t; + +/* PortFacts Reply message */ +typedef struct _MPI2_PORT_FACTS_REPLY +{ + U16 Reserved1; /* 0x00 */ + U8 MsgLength; /* 0x02 */ + U8 Function; /* 0x03 */ + U16 Reserved2; /* 0x04 */ + U8 PortNumber; /* 0x06 */ + U8 MsgFlags; /* 0x07 */ + U8 VP_ID; /* 0x08 */ + U8 VF_ID; /* 0x09 */ + U16 Reserved3; /* 0x0A */ + U16 Reserved4; /* 0x0C */ + U16 IOCStatus; /* 0x0E */ + U32 IOCLogInfo; /* 0x10 */ + U8 Reserved5; /* 0x14 */ + U8 PortType; /* 0x15 */ + U16 Reserved6; /* 0x16 */ + U16 MaxPostedCmdBuffers; /* 0x18 */ + U16 Reserved7; /* 0x1A */ +} MPI2_PORT_FACTS_REPLY, MPI2_POINTER PTR_MPI2_PORT_FACTS_REPLY, + Mpi2PortFactsReply_t, MPI2_POINTER pMpi2PortFactsReply_t; + +/* PortType values */ +#define MPI2_PORTFACTS_PORTTYPE_INACTIVE (0x00) +#define MPI2_PORTFACTS_PORTTYPE_FC (0x10) +#define MPI2_PORTFACTS_PORTTYPE_ISCSI (0x20) +#define MPI2_PORTFACTS_PORTTYPE_SAS_PHYSICAL (0x30) +#define MPI2_PORTFACTS_PORTTYPE_SAS_VIRTUAL (0x31) + + +/**************************************************************************** +* PortEnable message +****************************************************************************/ + +/* PortEnable Request message */ +typedef struct _MPI2_PORT_ENABLE_REQUEST +{ + U16 Reserved1; /* 0x00 */ + U8 ChainOffset; /* 0x02 */ + U8 Function; /* 0x03 */ + U8 Reserved2; /* 0x04 */ + U8 PortFlags; /* 0x05 */ + U8 Reserved3; /* 0x06 */ + U8 MsgFlags; /* 0x07 */ + U8 VP_ID; /* 0x08 */ + U8 VF_ID; /* 0x09 */ + U16 Reserved4; /* 0x0A */ +} MPI2_PORT_ENABLE_REQUEST, MPI2_POINTER PTR_MPI2_PORT_ENABLE_REQUEST, + Mpi2PortEnableRequest_t, MPI2_POINTER pMpi2PortEnableRequest_t; + + +/* PortEnable Reply message */ +typedef struct _MPI2_PORT_ENABLE_REPLY +{ + U16 Reserved1; /* 0x00 */ + U8 MsgLength; /* 0x02 */ + U8 Function; /* 0x03 */ + U8 Reserved2; /* 0x04 */ + U8 PortFlags; /* 0x05 */ + U8 Reserved3; /* 0x06 */ + U8 MsgFlags; /* 0x07 */ + U8 VP_ID; /* 0x08 */ + U8 VF_ID; /* 0x09 */ + U16 Reserved4; /* 0x0A */ + U16 Reserved5; /* 0x0C */ + U16 IOCStatus; /* 0x0E */ + U32 IOCLogInfo; /* 0x10 */ +} MPI2_PORT_ENABLE_REPLY, MPI2_POINTER PTR_MPI2_PORT_ENABLE_REPLY, + Mpi2PortEnableReply_t, MPI2_POINTER pMpi2PortEnableReply_t; + + +/**************************************************************************** +* EventNotification message +****************************************************************************/ + +/* EventNotification Request message */ +#define MPI2_EVENT_NOTIFY_EVENTMASK_WORDS (4) + +typedef struct _MPI2_EVENT_NOTIFICATION_REQUEST +{ + U16 Reserved1; /* 0x00 */ + U8 ChainOffset; /* 0x02 */ + U8 Function; /* 0x03 */ + U16 Reserved2; /* 0x04 */ + U8 Reserved3; /* 0x06 */ + U8 MsgFlags; /* 0x07 */ + U8 VP_ID; /* 0x08 */ + U8 VF_ID; /* 0x09 */ + U16 Reserved4; /* 0x0A */ + U32 Reserved5; /* 0x0C */ + U32 Reserved6; /* 0x10 */ + U32 EventMasks[MPI2_EVENT_NOTIFY_EVENTMASK_WORDS];/* 0x14 */ + U16 SASBroadcastPrimitiveMasks; /* 0x24 */ + U16 Reserved7; /* 0x26 */ + U32 Reserved8; /* 0x28 */ +} MPI2_EVENT_NOTIFICATION_REQUEST, + MPI2_POINTER PTR_MPI2_EVENT_NOTIFICATION_REQUEST, + Mpi2EventNotificationRequest_t, MPI2_POINTER pMpi2EventNotificationRequest_t; + + +/* EventNotification Reply message */ +typedef struct _MPI2_EVENT_NOTIFICATION_REPLY +{ + U16 EventDataLength; /* 0x00 */ + U8 MsgLength; /* 0x02 */ + U8 Function; /* 0x03 */ + U16 Reserved1; /* 0x04 */ + U8 AckRequired; /* 0x06 */ + U8 MsgFlags; /* 0x07 */ + U8 VP_ID; /* 0x08 */ + U8 VF_ID; /* 0x09 */ + U16 Reserved2; /* 0x0A */ + U16 Reserved3; /* 0x0C */ + U16 IOCStatus; /* 0x0E */ + U32 IOCLogInfo; /* 0x10 */ + U16 Event; /* 0x14 */ + U16 Reserved4; /* 0x16 */ + U32 EventContext; /* 0x18 */ + U32 EventData[1]; /* 0x1C */ +} MPI2_EVENT_NOTIFICATION_REPLY, MPI2_POINTER PTR_MPI2_EVENT_NOTIFICATION_REPLY, + Mpi2EventNotificationReply_t, MPI2_POINTER pMpi2EventNotificationReply_t; + +/* AckRequired */ +#define MPI2_EVENT_NOTIFICATION_ACK_NOT_REQUIRED (0x00) +#define MPI2_EVENT_NOTIFICATION_ACK_REQUIRED (0x01) + +/* Event */ +#define MPI2_EVENT_LOG_DATA (0x0001) +#define MPI2_EVENT_STATE_CHANGE (0x0002) +#define MPI2_EVENT_HARD_RESET_RECEIVED (0x0005) +#define MPI2_EVENT_EVENT_CHANGE (0x000A) +#define MPI2_EVENT_TASK_SET_FULL (0x000E) +#define MPI2_EVENT_SAS_DEVICE_STATUS_CHANGE (0x000F) +#define MPI2_EVENT_IR_OPERATION_STATUS (0x0014) +#define MPI2_EVENT_SAS_DISCOVERY (0x0016) +#define MPI2_EVENT_SAS_BROADCAST_PRIMITIVE (0x0017) +#define MPI2_EVENT_SAS_INIT_DEVICE_STATUS_CHANGE (0x0018) +#define MPI2_EVENT_SAS_INIT_TABLE_OVERFLOW (0x0019) +#define MPI2_EVENT_SAS_TOPOLOGY_CHANGE_LIST (0x001C) +#define MPI2_EVENT_SAS_ENCL_DEVICE_STATUS_CHANGE (0x001D) +#define MPI2_EVENT_IR_VOLUME (0x001E) +#define MPI2_EVENT_IR_PHYSICAL_DISK (0x001F) +#define MPI2_EVENT_IR_CONFIGURATION_CHANGE_LIST (0x0020) +#define MPI2_EVENT_LOG_ENTRY_ADDED (0x0021) + + +/* Log Entry Added Event data */ + +/* the following structure matches MPI2_LOG_0_ENTRY in mpi2_cnfg.h */ +#define MPI2_EVENT_DATA_LOG_DATA_LENGTH (0x1C) + +typedef struct _MPI2_EVENT_DATA_LOG_ENTRY_ADDED +{ + U64 TimeStamp; /* 0x00 */ + U32 Reserved1; /* 0x08 */ + U16 LogSequence; /* 0x0C */ + U16 LogEntryQualifier; /* 0x0E */ + U8 VP_ID; /* 0x10 */ + U8 VF_ID; /* 0x11 */ + U16 Reserved2; /* 0x12 */ + U8 LogData[MPI2_EVENT_DATA_LOG_DATA_LENGTH];/* 0x14 */ +} MPI2_EVENT_DATA_LOG_ENTRY_ADDED, + MPI2_POINTER PTR_MPI2_EVENT_DATA_LOG_ENTRY_ADDED, + Mpi2EventDataLogEntryAdded_t, MPI2_POINTER pMpi2EventDataLogEntryAdded_t; + +/* Hard Reset Received Event data */ + +typedef struct _MPI2_EVENT_DATA_HARD_RESET_RECEIVED +{ + U8 Reserved1; /* 0x00 */ + U8 Port; /* 0x01 */ + U16 Reserved2; /* 0x02 */ +} MPI2_EVENT_DATA_HARD_RESET_RECEIVED, + MPI2_POINTER PTR_MPI2_EVENT_DATA_HARD_RESET_RECEIVED, + Mpi2EventDataHardResetReceived_t, + MPI2_POINTER pMpi2EventDataHardResetReceived_t; + +/* Task Set Full Event data */ + +typedef struct _MPI2_EVENT_DATA_TASK_SET_FULL +{ + U16 DevHandle; /* 0x00 */ + U16 CurrentDepth; /* 0x02 */ +} MPI2_EVENT_DATA_TASK_SET_FULL, MPI2_POINTER PTR_MPI2_EVENT_DATA_TASK_SET_FULL, + Mpi2EventDataTaskSetFull_t, MPI2_POINTER pMpi2EventDataTaskSetFull_t; + + +/* SAS Device Status Change Event data */ + +typedef struct _MPI2_EVENT_DATA_SAS_DEVICE_STATUS_CHANGE +{ + U16 TaskTag; /* 0x00 */ + U8 ReasonCode; /* 0x02 */ + U8 Reserved1; /* 0x03 */ + U8 ASC; /* 0x04 */ + U8 ASCQ; /* 0x05 */ + U16 DevHandle; /* 0x06 */ + U32 Reserved2; /* 0x08 */ + U64 SASAddress; /* 0x0C */ + U8 LUN[8]; /* 0x14 */ +} MPI2_EVENT_DATA_SAS_DEVICE_STATUS_CHANGE, + MPI2_POINTER PTR_MPI2_EVENT_DATA_SAS_DEVICE_STATUS_CHANGE, + Mpi2EventDataSasDeviceStatusChange_t, + MPI2_POINTER pMpi2EventDataSasDeviceStatusChange_t; + +/* SAS Device Status Change Event data ReasonCode values */ +#define MPI2_EVENT_SAS_DEV_STAT_RC_SMART_DATA (0x05) +#define MPI2_EVENT_SAS_DEV_STAT_RC_UNSUPPORTED (0x07) +#define MPI2_EVENT_SAS_DEV_STAT_RC_INTERNAL_DEVICE_RESET (0x08) +#define MPI2_EVENT_SAS_DEV_STAT_RC_TASK_ABORT_INTERNAL (0x09) +#define MPI2_EVENT_SAS_DEV_STAT_RC_ABORT_TASK_SET_INTERNAL (0x0A) +#define MPI2_EVENT_SAS_DEV_STAT_RC_CLEAR_TASK_SET_INTERNAL (0x0B) +#define MPI2_EVENT_SAS_DEV_STAT_RC_QUERY_TASK_INTERNAL (0x0C) +#define MPI2_EVENT_SAS_DEV_STAT_RC_ASYNC_NOTIFICATION (0x0D) +#define MPI2_EVENT_SAS_DEV_STAT_RC_CMP_INTERNAL_DEV_RESET (0x0E) +#define MPI2_EVENT_SAS_DEV_STAT_RC_CMP_TASK_ABORT_INTERNAL (0x0F) +#define MPI2_EVENT_SAS_DEV_STAT_RC_SATA_INIT_FAILURE (0x10) + + +/* Integrated RAID Operation Status Event data */ + +typedef struct _MPI2_EVENT_DATA_IR_OPERATION_STATUS +{ + U16 VolDevHandle; /* 0x00 */ + U16 Reserved1; /* 0x02 */ + U8 RAIDOperation; /* 0x04 */ + U8 PercentComplete; /* 0x05 */ + U16 Reserved2; /* 0x06 */ + U32 Resereved3; /* 0x08 */ +} MPI2_EVENT_DATA_IR_OPERATION_STATUS, + MPI2_POINTER PTR_MPI2_EVENT_DATA_IR_OPERATION_STATUS, + Mpi2EventDataIrOperationStatus_t, + MPI2_POINTER pMpi2EventDataIrOperationStatus_t; + +/* Integrated RAID Operation Status Event data RAIDOperation values */ +#define MPI2_EVENT_IR_RAIDOP_RESYNC (0x00) +#define MPI2_EVENT_IR_RAIDOP_ONLINE_CAP_EXPANSION (0x01) +#define MPI2_EVENT_IR_RAIDOP_CONSISTENCY_CHECK (0x02) +#define MPI2_EVENT_IR_RAIDOP_BACKGROUND_INIT (0x03) +#define MPI2_EVENT_IR_RAIDOP_MAKE_DATA_CONSISTENT (0x04) + + +/* Integrated RAID Volume Event data */ + +typedef struct _MPI2_EVENT_DATA_IR_VOLUME +{ + U16 VolDevHandle; /* 0x00 */ + U8 ReasonCode; /* 0x02 */ + U8 Reserved1; /* 0x03 */ + U32 NewValue; /* 0x04 */ + U32 PreviousValue; /* 0x08 */ +} MPI2_EVENT_DATA_IR_VOLUME, MPI2_POINTER PTR_MPI2_EVENT_DATA_IR_VOLUME, + Mpi2EventDataIrVolume_t, MPI2_POINTER pMpi2EventDataIrVolume_t; + +/* Integrated RAID Volume Event data ReasonCode values */ +#define MPI2_EVENT_IR_VOLUME_RC_SETTINGS_CHANGED (0x01) +#define MPI2_EVENT_IR_VOLUME_RC_STATUS_FLAGS_CHANGED (0x02) +#define MPI2_EVENT_IR_VOLUME_RC_STATE_CHANGED (0x03) + + +/* Integrated RAID Physical Disk Event data */ + +typedef struct _MPI2_EVENT_DATA_IR_PHYSICAL_DISK +{ + U16 Reserved1; /* 0x00 */ + U8 ReasonCode; /* 0x02 */ + U8 PhysDiskNum; /* 0x03 */ + U16 PhysDiskDevHandle; /* 0x04 */ + U16 Reserved2; /* 0x06 */ + U16 Slot; /* 0x08 */ + U16 EnclosureHandle; /* 0x0A */ + U32 NewValue; /* 0x0C */ + U32 PreviousValue; /* 0x10 */ +} MPI2_EVENT_DATA_IR_PHYSICAL_DISK, + MPI2_POINTER PTR_MPI2_EVENT_DATA_IR_PHYSICAL_DISK, + Mpi2EventDataIrPhysicalDisk_t, MPI2_POINTER pMpi2EventDataIrPhysicalDisk_t; + +/* Integrated RAID Physical Disk Event data ReasonCode values */ +#define MPI2_EVENT_IR_PHYSDISK_RC_SETTINGS_CHANGED (0x01) +#define MPI2_EVENT_IR_PHYSDISK_RC_STATUS_FLAGS_CHANGED (0x02) +#define MPI2_EVENT_IR_PHYSDISK_RC_STATE_CHANGED (0x03) + + +/* Integrated RAID Configuration Change List Event data */ + +/* + * Host code (drivers, BIOS, utilities, etc.) should leave this define set to + * one and check NumElements at runtime. + */ +#ifndef MPI2_EVENT_IR_CONFIG_ELEMENT_COUNT +#define MPI2_EVENT_IR_CONFIG_ELEMENT_COUNT (1) +#endif + +typedef struct _MPI2_EVENT_IR_CONFIG_ELEMENT +{ + U16 ElementFlags; /* 0x00 */ + U16 VolDevHandle; /* 0x02 */ + U8 ReasonCode; /* 0x04 */ + U8 PhysDiskNum; /* 0x05 */ + U16 PhysDiskDevHandle; /* 0x06 */ +} MPI2_EVENT_IR_CONFIG_ELEMENT, MPI2_POINTER PTR_MPI2_EVENT_IR_CONFIG_ELEMENT, + Mpi2EventIrConfigElement_t, MPI2_POINTER pMpi2EventIrConfigElement_t; + +/* IR Configuration Change List Event data ElementFlags values */ +#define MPI2_EVENT_IR_CHANGE_EFLAGS_ELEMENT_TYPE_MASK (0x000F) +#define MPI2_EVENT_IR_CHANGE_EFLAGS_VOLUME_ELEMENT (0x0000) +#define MPI2_EVENT_IR_CHANGE_EFLAGS_VOLPHYSDISK_ELEMENT (0x0001) +#define MPI2_EVENT_IR_CHANGE_EFLAGS_HOTSPARE_ELEMENT (0x0002) + +/* IR Configuration Change List Event data ReasonCode values */ +#define MPI2_EVENT_IR_CHANGE_RC_ADDED (0x01) +#define MPI2_EVENT_IR_CHANGE_RC_REMOVED (0x02) +#define MPI2_EVENT_IR_CHANGE_RC_NO_CHANGE (0x03) +#define MPI2_EVENT_IR_CHANGE_RC_HIDE (0x04) +#define MPI2_EVENT_IR_CHANGE_RC_UNHIDE (0x05) +#define MPI2_EVENT_IR_CHANGE_RC_VOLUME_CREATED (0x06) +#define MPI2_EVENT_IR_CHANGE_RC_VOLUME_DELETED (0x07) +#define MPI2_EVENT_IR_CHANGE_RC_PD_CREATED (0x08) +#define MPI2_EVENT_IR_CHANGE_RC_PD_DELETED (0x09) + +typedef struct _MPI2_EVENT_DATA_IR_CONFIG_CHANGE_LIST +{ + U8 NumElements; /* 0x00 */ + U8 Reserved1; /* 0x01 */ + U8 Reserved2; /* 0x02 */ + U8 ConfigNum; /* 0x03 */ + U32 Flags; /* 0x04 */ + MPI2_EVENT_IR_CONFIG_ELEMENT ConfigElement[MPI2_EVENT_IR_CONFIG_ELEMENT_COUNT]; /* 0x08 */ +} MPI2_EVENT_DATA_IR_CONFIG_CHANGE_LIST, + MPI2_POINTER PTR_MPI2_EVENT_DATA_IR_CONFIG_CHANGE_LIST, + Mpi2EventDataIrConfigChangeList_t, + MPI2_POINTER pMpi2EventDataIrConfigChangeList_t; + +/* IR Configuration Change List Event data Flags values */ +#define MPI2_EVENT_IR_CHANGE_FLAGS_FOREIGN_CONFIG (0x00000001) + + +/* SAS Discovery Event data */ + +typedef struct _MPI2_EVENT_DATA_SAS_DISCOVERY +{ + U8 Flags; /* 0x00 */ + U8 ReasonCode; /* 0x01 */ + U8 PhysicalPort; /* 0x02 */ + U8 Reserved1; /* 0x03 */ + U32 DiscoveryStatus; /* 0x04 */ +} MPI2_EVENT_DATA_SAS_DISCOVERY, + MPI2_POINTER PTR_MPI2_EVENT_DATA_SAS_DISCOVERY, + Mpi2EventDataSasDiscovery_t, MPI2_POINTER pMpi2EventDataSasDiscovery_t; + +/* SAS Discovery Event data Flags values */ +#define MPI2_EVENT_SAS_DISC_DEVICE_CHANGE (0x02) +#define MPI2_EVENT_SAS_DISC_IN_PROGRESS (0x01) + +/* SAS Discovery Event data ReasonCode values */ +#define MPI2_EVENT_SAS_DISC_RC_STARTED (0x01) +#define MPI2_EVENT_SAS_DISC_RC_COMPLETED (0x02) + +/* SAS Discovery Event data DiscoveryStatus values */ +#define MPI2_EVENT_SAS_DISC_DS_MAX_ENCLOSURES_EXCEED (0x80000000) +#define MPI2_EVENT_SAS_DISC_DS_MAX_EXPANDERS_EXCEED (0x40000000) +#define MPI2_EVENT_SAS_DISC_DS_MAX_DEVICES_EXCEED (0x20000000) +#define MPI2_EVENT_SAS_DISC_DS_MAX_TOPO_PHYS_EXCEED (0x10000000) +#define MPI2_EVENT_SAS_DISC_DS_DOWNSTREAM_INITIATOR (0x08000000) +#define MPI2_EVENT_SAS_DISC_DS_MULTI_SUBTRACTIVE_SUBTRACTIVE (0x00008000) +#define MPI2_EVENT_SAS_DISC_DS_EXP_MULTI_SUBTRACTIVE (0x00004000) +#define MPI2_EVENT_SAS_DISC_DS_MULTI_PORT_DOMAIN (0x00002000) +#define MPI2_EVENT_SAS_DISC_DS_TABLE_TO_SUBTRACTIVE_LINK (0x00001000) +#define MPI2_EVENT_SAS_DISC_DS_UNSUPPORTED_DEVICE (0x00000800) +#define MPI2_EVENT_SAS_DISC_DS_TABLE_LINK (0x00000400) +#define MPI2_EVENT_SAS_DISC_DS_SUBTRACTIVE_LINK (0x00000200) +#define MPI2_EVENT_SAS_DISC_DS_SMP_CRC_ERROR (0x00000100) +#define MPI2_EVENT_SAS_DISC_DS_SMP_FUNCTION_FAILED (0x00000080) +#define MPI2_EVENT_SAS_DISC_DS_INDEX_NOT_EXIST (0x00000040) +#define MPI2_EVENT_SAS_DISC_DS_OUT_ROUTE_ENTRIES (0x00000020) +#define MPI2_EVENT_SAS_DISC_DS_SMP_TIMEOUT (0x00000010) +#define MPI2_EVENT_SAS_DISC_DS_MULTIPLE_PORTS (0x00000004) +#define MPI2_EVENT_SAS_DISC_DS_UNADDRESSABLE_DEVICE (0x00000002) +#define MPI2_EVENT_SAS_DISC_DS_LOOP_DETECTED (0x00000001) + + +/* SAS Broadcast Primitive Event data */ + +typedef struct _MPI2_EVENT_DATA_SAS_BROADCAST_PRIMITIVE +{ + U8 PhyNum; /* 0x00 */ + U8 Port; /* 0x01 */ + U8 PortWidth; /* 0x02 */ + U8 Primitive; /* 0x03 */ +} MPI2_EVENT_DATA_SAS_BROADCAST_PRIMITIVE, + MPI2_POINTER PTR_MPI2_EVENT_DATA_SAS_BROADCAST_PRIMITIVE, + Mpi2EventDataSasBroadcastPrimitive_t, + MPI2_POINTER pMpi2EventDataSasBroadcastPrimitive_t; + +/* defines for the Primitive field */ +#define MPI2_EVENT_PRIMITIVE_CHANGE (0x01) +#define MPI2_EVENT_PRIMITIVE_SES (0x02) +#define MPI2_EVENT_PRIMITIVE_EXPANDER (0x03) +#define MPI2_EVENT_PRIMITIVE_ASYNCHRONOUS_EVENT (0x04) +#define MPI2_EVENT_PRIMITIVE_RESERVED3 (0x05) +#define MPI2_EVENT_PRIMITIVE_RESERVED4 (0x06) +#define MPI2_EVENT_PRIMITIVE_CHANGE0_RESERVED (0x07) +#define MPI2_EVENT_PRIMITIVE_CHANGE1_RESERVED (0x08) + + +/* SAS Initiator Device Status Change Event data */ + +typedef struct _MPI2_EVENT_DATA_SAS_INIT_DEV_STATUS_CHANGE +{ + U8 ReasonCode; /* 0x00 */ + U8 PhysicalPort; /* 0x01 */ + U16 DevHandle; /* 0x02 */ + U64 SASAddress; /* 0x04 */ +} MPI2_EVENT_DATA_SAS_INIT_DEV_STATUS_CHANGE, + MPI2_POINTER PTR_MPI2_EVENT_DATA_SAS_INIT_DEV_STATUS_CHANGE, + Mpi2EventDataSasInitDevStatusChange_t, + MPI2_POINTER pMpi2EventDataSasInitDevStatusChange_t; + +/* SAS Initiator Device Status Change event ReasonCode values */ +#define MPI2_EVENT_SAS_INIT_RC_ADDED (0x01) +#define MPI2_EVENT_SAS_INIT_RC_NOT_RESPONDING (0x02) + + +/* SAS Initiator Device Table Overflow Event data */ + +typedef struct _MPI2_EVENT_DATA_SAS_INIT_TABLE_OVERFLOW +{ + U16 MaxInit; /* 0x00 */ + U16 CurrentInit; /* 0x02 */ + U64 SASAddress; /* 0x04 */ +} MPI2_EVENT_DATA_SAS_INIT_TABLE_OVERFLOW, + MPI2_POINTER PTR_MPI2_EVENT_DATA_SAS_INIT_TABLE_OVERFLOW, + Mpi2EventDataSasInitTableOverflow_t, + MPI2_POINTER pMpi2EventDataSasInitTableOverflow_t; + + +/* SAS Topology Change List Event data */ + +/* + * Host code (drivers, BIOS, utilities, etc.) should leave this define set to + * one and check NumEntries at runtime. + */ +#ifndef MPI2_EVENT_SAS_TOPO_PHY_COUNT +#define MPI2_EVENT_SAS_TOPO_PHY_COUNT (1) +#endif + +typedef struct _MPI2_EVENT_SAS_TOPO_PHY_ENTRY +{ + U16 AttachedDevHandle; /* 0x00 */ + U8 LinkRate; /* 0x02 */ + U8 PhyStatus; /* 0x03 */ +} MPI2_EVENT_SAS_TOPO_PHY_ENTRY, MPI2_POINTER PTR_MPI2_EVENT_SAS_TOPO_PHY_ENTRY, + Mpi2EventSasTopoPhyEntry_t, MPI2_POINTER pMpi2EventSasTopoPhyEntry_t; + +typedef struct _MPI2_EVENT_DATA_SAS_TOPOLOGY_CHANGE_LIST +{ + U16 EnclosureHandle; /* 0x00 */ + U16 ExpanderDevHandle; /* 0x02 */ + U8 NumPhys; /* 0x04 */ + U8 Reserved1; /* 0x05 */ + U16 Reserved2; /* 0x06 */ + U8 NumEntries; /* 0x08 */ + U8 StartPhyNum; /* 0x09 */ + U8 ExpStatus; /* 0x0A */ + U8 PhysicalPort; /* 0x0B */ + MPI2_EVENT_SAS_TOPO_PHY_ENTRY PHY[MPI2_EVENT_SAS_TOPO_PHY_COUNT]; /* 0x0C*/ +} MPI2_EVENT_DATA_SAS_TOPOLOGY_CHANGE_LIST, + MPI2_POINTER PTR_MPI2_EVENT_DATA_SAS_TOPOLOGY_CHANGE_LIST, + Mpi2EventDataSasTopologyChangeList_t, + MPI2_POINTER pMpi2EventDataSasTopologyChangeList_t; + +/* values for the ExpStatus field */ +#define MPI2_EVENT_SAS_TOPO_ES_ADDED (0x01) +#define MPI2_EVENT_SAS_TOPO_ES_NOT_RESPONDING (0x02) +#define MPI2_EVENT_SAS_TOPO_ES_RESPONDING (0x03) +#define MPI2_EVENT_SAS_TOPO_ES_DELAY_NOT_RESPONDING (0x04) + +/* defines for the LinkRate field */ +#define MPI2_EVENT_SAS_TOPO_LR_CURRENT_MASK (0xF0) +#define MPI2_EVENT_SAS_TOPO_LR_CURRENT_SHIFT (4) +#define MPI2_EVENT_SAS_TOPO_LR_PREV_MASK (0x0F) +#define MPI2_EVENT_SAS_TOPO_LR_PREV_SHIFT (0) + +#define MPI2_EVENT_SAS_TOPO_LR_UNKNOWN_LINK_RATE (0x00) +#define MPI2_EVENT_SAS_TOPO_LR_PHY_DISABLED (0x01) +#define MPI2_EVENT_SAS_TOPO_LR_NEGOTIATION_FAILED (0x02) +#define MPI2_EVENT_SAS_TOPO_LR_SATA_OOB_COMPLETE (0x03) +#define MPI2_EVENT_SAS_TOPO_LR_PORT_SELECTOR (0x04) +#define MPI2_EVENT_SAS_TOPO_LR_SMP_RESET_IN_PROGRESS (0x05) +#define MPI2_EVENT_SAS_TOPO_LR_RATE_1_5 (0x08) +#define MPI2_EVENT_SAS_TOPO_LR_RATE_3_0 (0x09) +#define MPI2_EVENT_SAS_TOPO_LR_RATE_6_0 (0x0A) + +/* values for the PhyStatus field */ +#define MPI2_EVENT_SAS_TOPO_PHYSTATUS_VACANT (0x80) +#define MPI2_EVENT_SAS_TOPO_PS_MULTIPLEX_CHANGE (0x10) +/* values for the PhyStatus ReasonCode sub-field */ +#define MPI2_EVENT_SAS_TOPO_RC_MASK (0x0F) +#define MPI2_EVENT_SAS_TOPO_RC_TARG_ADDED (0x01) +#define MPI2_EVENT_SAS_TOPO_RC_TARG_NOT_RESPONDING (0x02) +#define MPI2_EVENT_SAS_TOPO_RC_PHY_CHANGED (0x03) +#define MPI2_EVENT_SAS_TOPO_RC_NO_CHANGE (0x04) +#define MPI2_EVENT_SAS_TOPO_RC_DELAY_NOT_RESPONDING (0x05) + + +/* SAS Enclosure Device Status Change Event data */ + +typedef struct _MPI2_EVENT_DATA_SAS_ENCL_DEV_STATUS_CHANGE +{ + U16 EnclosureHandle; /* 0x00 */ + U8 ReasonCode; /* 0x02 */ + U8 PhysicalPort; /* 0x03 */ + U64 EnclosureLogicalID; /* 0x04 */ + U16 NumSlots; /* 0x0C */ + U16 StartSlot; /* 0x0E */ + U32 PhyBits; /* 0x10 */ +} MPI2_EVENT_DATA_SAS_ENCL_DEV_STATUS_CHANGE, + MPI2_POINTER PTR_MPI2_EVENT_DATA_SAS_ENCL_DEV_STATUS_CHANGE, + Mpi2EventDataSasEnclDevStatusChange_t, + MPI2_POINTER pMpi2EventDataSasEnclDevStatusChange_t; + +/* SAS Enclosure Device Status Change event ReasonCode values */ +#define MPI2_EVENT_SAS_ENCL_RC_ADDED (0x01) +#define MPI2_EVENT_SAS_ENCL_RC_NOT_RESPONDING (0x02) + + +/**************************************************************************** +* EventAck message +****************************************************************************/ + +/* EventAck Request message */ +typedef struct _MPI2_EVENT_ACK_REQUEST +{ + U16 Reserved1; /* 0x00 */ + U8 ChainOffset; /* 0x02 */ + U8 Function; /* 0x03 */ + U16 Reserved2; /* 0x04 */ + U8 Reserved3; /* 0x06 */ + U8 MsgFlags; /* 0x07 */ + U8 VP_ID; /* 0x08 */ + U8 VF_ID; /* 0x09 */ + U16 Reserved4; /* 0x0A */ + U16 Event; /* 0x0C */ + U16 Reserved5; /* 0x0E */ + U32 EventContext; /* 0x10 */ +} MPI2_EVENT_ACK_REQUEST, MPI2_POINTER PTR_MPI2_EVENT_ACK_REQUEST, + Mpi2EventAckRequest_t, MPI2_POINTER pMpi2EventAckRequest_t; + + +/* EventAck Reply message */ +typedef struct _MPI2_EVENT_ACK_REPLY +{ + U16 Reserved1; /* 0x00 */ + U8 MsgLength; /* 0x02 */ + U8 Function; /* 0x03 */ + U16 Reserved2; /* 0x04 */ + U8 Reserved3; /* 0x06 */ + U8 MsgFlags; /* 0x07 */ + U8 VP_ID; /* 0x08 */ + U8 VF_ID; /* 0x09 */ + U16 Reserved4; /* 0x0A */ + U16 Reserved5; /* 0x0C */ + U16 IOCStatus; /* 0x0E */ + U32 IOCLogInfo; /* 0x10 */ +} MPI2_EVENT_ACK_REPLY, MPI2_POINTER PTR_MPI2_EVENT_ACK_REPLY, + Mpi2EventAckReply_t, MPI2_POINTER pMpi2EventAckReply_t; + + +/**************************************************************************** +* FWDownload message +****************************************************************************/ + +/* FWDownload Request message */ +typedef struct _MPI2_FW_DOWNLOAD_REQUEST +{ + U8 ImageType; /* 0x00 */ + U8 Reserved1; /* 0x01 */ + U8 ChainOffset; /* 0x02 */ + U8 Function; /* 0x03 */ + U16 Reserved2; /* 0x04 */ + U8 Reserved3; /* 0x06 */ + U8 MsgFlags; /* 0x07 */ + U8 VP_ID; /* 0x08 */ + U8 VF_ID; /* 0x09 */ + U16 Reserved4; /* 0x0A */ + U32 TotalImageSize; /* 0x0C */ + U32 Reserved5; /* 0x10 */ + MPI2_MPI_SGE_UNION SGL; /* 0x14 */ +} MPI2_FW_DOWNLOAD_REQUEST, MPI2_POINTER PTR_MPI2_FW_DOWNLOAD_REQUEST, + Mpi2FWDownloadRequest, MPI2_POINTER pMpi2FWDownloadRequest; + +#define MPI2_FW_DOWNLOAD_MSGFLGS_LAST_SEGMENT (0x01) + +#define MPI2_FW_DOWNLOAD_ITYPE_FW (0x01) +#define MPI2_FW_DOWNLOAD_ITYPE_BIOS (0x02) +#define MPI2_FW_DOWNLOAD_ITYPE_MANUFACTURING (0x06) +#define MPI2_FW_DOWNLOAD_ITYPE_CONFIG_1 (0x07) +#define MPI2_FW_DOWNLOAD_ITYPE_CONFIG_2 (0x08) +#define MPI2_FW_DOWNLOAD_ITYPE_MEGARAID (0x09) +#define MPI2_FW_DOWNLOAD_ITYPE_COMMON_BOOT_BLOCK (0x0B) + +/* FWDownload TransactionContext Element */ +typedef struct _MPI2_FW_DOWNLOAD_TCSGE +{ + U8 Reserved1; /* 0x00 */ + U8 ContextSize; /* 0x01 */ + U8 DetailsLength; /* 0x02 */ + U8 Flags; /* 0x03 */ + U32 Reserved2; /* 0x04 */ + U32 ImageOffset; /* 0x08 */ + U32 ImageSize; /* 0x0C */ +} MPI2_FW_DOWNLOAD_TCSGE, MPI2_POINTER PTR_MPI2_FW_DOWNLOAD_TCSGE, + Mpi2FWDownloadTCSGE_t, MPI2_POINTER pMpi2FWDownloadTCSGE_t; + +/* FWDownload Reply message */ +typedef struct _MPI2_FW_DOWNLOAD_REPLY +{ + U8 ImageType; /* 0x00 */ + U8 Reserved1; /* 0x01 */ + U8 MsgLength; /* 0x02 */ + U8 Function; /* 0x03 */ + U16 Reserved2; /* 0x04 */ + U8 Reserved3; /* 0x06 */ + U8 MsgFlags; /* 0x07 */ + U8 VP_ID; /* 0x08 */ + U8 VF_ID; /* 0x09 */ + U16 Reserved4; /* 0x0A */ + U16 Reserved5; /* 0x0C */ + U16 IOCStatus; /* 0x0E */ + U32 IOCLogInfo; /* 0x10 */ +} MPI2_FW_DOWNLOAD_REPLY, MPI2_POINTER PTR_MPI2_FW_DOWNLOAD_REPLY, + Mpi2FWDownloadReply_t, MPI2_POINTER pMpi2FWDownloadReply_t; + + +/**************************************************************************** +* FWUpload message +****************************************************************************/ + +/* FWUpload Request message */ +typedef struct _MPI2_FW_UPLOAD_REQUEST +{ + U8 ImageType; /* 0x00 */ + U8 Reserved1; /* 0x01 */ + U8 ChainOffset; /* 0x02 */ + U8 Function; /* 0x03 */ + U16 Reserved2; /* 0x04 */ + U8 Reserved3; /* 0x06 */ + U8 MsgFlags; /* 0x07 */ + U8 VP_ID; /* 0x08 */ + U8 VF_ID; /* 0x09 */ + U16 Reserved4; /* 0x0A */ + U32 Reserved5; /* 0x0C */ + U32 Reserved6; /* 0x10 */ + MPI2_MPI_SGE_UNION SGL; /* 0x14 */ +} MPI2_FW_UPLOAD_REQUEST, MPI2_POINTER PTR_MPI2_FW_UPLOAD_REQUEST, + Mpi2FWUploadRequest_t, MPI2_POINTER pMpi2FWUploadRequest_t; + +#define MPI2_FW_UPLOAD_ITYPE_FW_CURRENT (0x00) +#define MPI2_FW_UPLOAD_ITYPE_FW_FLASH (0x01) +#define MPI2_FW_UPLOAD_ITYPE_BIOS_FLASH (0x02) +#define MPI2_FW_UPLOAD_ITYPE_FW_BACKUP (0x05) +#define MPI2_FW_UPLOAD_ITYPE_MANUFACTURING (0x06) +#define MPI2_FW_UPLOAD_ITYPE_CONFIG_1 (0x07) +#define MPI2_FW_UPLOAD_ITYPE_CONFIG_2 (0x08) +#define MPI2_FW_UPLOAD_ITYPE_MEGARAID (0x09) +#define MPI2_FW_UPLOAD_ITYPE_COMPLETE (0x0A) +#define MPI2_FW_UPLOAD_ITYPE_COMMON_BOOT_BLOCK (0x0B) + +typedef struct _MPI2_FW_UPLOAD_TCSGE +{ + U8 Reserved1; /* 0x00 */ + U8 ContextSize; /* 0x01 */ + U8 DetailsLength; /* 0x02 */ + U8 Flags; /* 0x03 */ + U32 Reserved2; /* 0x04 */ + U32 ImageOffset; /* 0x08 */ + U32 ImageSize; /* 0x0C */ +} MPI2_FW_UPLOAD_TCSGE, MPI2_POINTER PTR_MPI2_FW_UPLOAD_TCSGE, + Mpi2FWUploadTCSGE_t, MPI2_POINTER pMpi2FWUploadTCSGE_t; + +/* FWUpload Reply message */ +typedef struct _MPI2_FW_UPLOAD_REPLY +{ + U8 ImageType; /* 0x00 */ + U8 Reserved1; /* 0x01 */ + U8 MsgLength; /* 0x02 */ + U8 Function; /* 0x03 */ + U16 Reserved2; /* 0x04 */ + U8 Reserved3; /* 0x06 */ + U8 MsgFlags; /* 0x07 */ + U8 VP_ID; /* 0x08 */ + U8 VF_ID; /* 0x09 */ + U16 Reserved4; /* 0x0A */ + U16 Reserved5; /* 0x0C */ + U16 IOCStatus; /* 0x0E */ + U32 IOCLogInfo; /* 0x10 */ + U32 ActualImageSize; /* 0x14 */ +} MPI2_FW_UPLOAD_REPLY, MPI2_POINTER PTR_MPI2_FW_UPLOAD_REPLY, + Mpi2FWUploadReply_t, MPI2_POINTER pMPi2FWUploadReply_t; + + +/* FW Image Header */ +typedef struct _MPI2_FW_IMAGE_HEADER +{ + U32 Signature; /* 0x00 */ + U32 Signature0; /* 0x04 */ + U32 Signature1; /* 0x08 */ + U32 Signature2; /* 0x0C */ + MPI2_VERSION_UNION MPIVersion; /* 0x10 */ + MPI2_VERSION_UNION FWVersion; /* 0x14 */ + MPI2_VERSION_UNION NVDATAVersion; /* 0x18 */ + MPI2_VERSION_UNION PackageVersion; /* 0x1C */ + U16 VendorID; /* 0x20 */ + U16 ProductID; /* 0x22 */ + U16 ProtocolFlags; /* 0x24 */ + U16 Reserved26; /* 0x26 */ + U32 IOCCapabilities; /* 0x28 */ + U32 ImageSize; /* 0x2C */ + U32 NextImageHeaderOffset; /* 0x30 */ + U32 Checksum; /* 0x34 */ + U32 Reserved38; /* 0x38 */ + U32 Reserved3C; /* 0x3C */ + U32 Reserved40; /* 0x40 */ + U32 Reserved44; /* 0x44 */ + U32 Reserved48; /* 0x48 */ + U32 Reserved4C; /* 0x4C */ + U32 Reserved50; /* 0x50 */ + U32 Reserved54; /* 0x54 */ + U32 Reserved58; /* 0x58 */ + U32 Reserved5C; /* 0x5C */ + U32 Reserved60; /* 0x60 */ + U32 FirmwareVersionNameWhat; /* 0x64 */ + U8 FirmwareVersionName[32]; /* 0x68 */ + U32 VendorNameWhat; /* 0x88 */ + U8 VendorName[32]; /* 0x8C */ + U32 PackageNameWhat; /* 0x88 */ + U8 PackageName[32]; /* 0x8C */ + U32 ReservedD0; /* 0xD0 */ + U32 ReservedD4; /* 0xD4 */ + U32 ReservedD8; /* 0xD8 */ + U32 ReservedDC; /* 0xDC */ + U32 ReservedE0; /* 0xE0 */ + U32 ReservedE4; /* 0xE4 */ + U32 ReservedE8; /* 0xE8 */ + U32 ReservedEC; /* 0xEC */ + U32 ReservedF0; /* 0xF0 */ + U32 ReservedF4; /* 0xF4 */ + U32 ReservedF8; /* 0xF8 */ + U32 ReservedFC; /* 0xFC */ +} MPI2_FW_IMAGE_HEADER, MPI2_POINTER PTR_MPI2_FW_IMAGE_HEADER, + Mpi2FWImageHeader_t, MPI2_POINTER pMpi2FWImageHeader_t; + +/* Signature field */ +#define MPI2_FW_HEADER_SIGNATURE_OFFSET (0x00) +#define MPI2_FW_HEADER_SIGNATURE_MASK (0xFF000000) +#define MPI2_FW_HEADER_SIGNATURE (0xEA000000) + +/* Signature0 field */ +#define MPI2_FW_HEADER_SIGNATURE0_OFFSET (0x04) +#define MPI2_FW_HEADER_SIGNATURE0 (0x5AFAA55A) + +/* Signature1 field */ +#define MPI2_FW_HEADER_SIGNATURE1_OFFSET (0x08) +#define MPI2_FW_HEADER_SIGNATURE1 (0xA55AFAA5) + +/* Signature2 field */ +#define MPI2_FW_HEADER_SIGNATURE2_OFFSET (0x0C) +#define MPI2_FW_HEADER_SIGNATURE2 (0x5AA55AFA) + + +/* defines for using the ProductID field */ +#define MPI2_FW_HEADER_PID_TYPE_MASK (0xF000) +#define MPI2_FW_HEADER_PID_TYPE_SAS (0x2000) + +#define MPI2_FW_HEADER_PID_PROD_MASK (0x0F00) +#define MPI2_FW_HEADER_PID_PROD_A (0x0000) + +#define MPI2_FW_HEADER_PID_FAMILY_MASK (0x00FF) +/* SAS */ +#define MPI2_FW_HEADER_PID_FAMILY_2108_SAS (0x0010) + +/* use MPI2_IOCFACTS_PROTOCOL_ defines for ProtocolFlags field */ + +/* use MPI2_IOCFACTS_CAPABILITY_ defines for IOCCapabilities field */ + + +#define MPI2_FW_HEADER_IMAGESIZE_OFFSET (0x2C) +#define MPI2_FW_HEADER_NEXTIMAGE_OFFSET (0x30) +#define MPI2_FW_HEADER_VERNMHWAT_OFFSET (0x64) + +#define MPI2_FW_HEADER_WHAT_SIGNATURE (0x29232840) + +#define MPI2_FW_HEADER_SIZE (0x100) + + +/* Extended Image Header */ +typedef struct _MPI2_EXT_IMAGE_HEADER + +{ + U8 ImageType; /* 0x00 */ + U8 Reserved1; /* 0x01 */ + U16 Reserved2; /* 0x02 */ + U32 Checksum; /* 0x04 */ + U32 ImageSize; /* 0x08 */ + U32 NextImageHeaderOffset; /* 0x0C */ + U32 PackageVersion; /* 0x10 */ + U32 Reserved3; /* 0x14 */ + U32 Reserved4; /* 0x18 */ + U32 Reserved5; /* 0x1C */ + U8 IdentifyString[32]; /* 0x20 */ +} MPI2_EXT_IMAGE_HEADER, MPI2_POINTER PTR_MPI2_EXT_IMAGE_HEADER, + Mpi2ExtImageHeader_t, MPI2_POINTER pMpi2ExtImageHeader_t; + +/* useful offsets */ +#define MPI2_EXT_IMAGE_IMAGETYPE_OFFSET (0x00) +#define MPI2_EXT_IMAGE_IMAGESIZE_OFFSET (0x08) +#define MPI2_EXT_IMAGE_NEXTIMAGE_OFFSET (0x0C) + +#define MPI2_EXT_IMAGE_HEADER_SIZE (0x40) + +/* defines for the ImageType field */ +#define MPI2_EXT_IMAGE_TYPE_UNSPECIFIED (0x00) +#define MPI2_EXT_IMAGE_TYPE_FW (0x01) +#define MPI2_EXT_IMAGE_TYPE_NVDATA (0x03) +#define MPI2_EXT_IMAGE_TYPE_BOOTLOADER (0x04) +#define MPI2_EXT_IMAGE_TYPE_INITIALIZATION (0x05) +#define MPI2_EXT_IMAGE_TYPE_FLASH_LAYOUT (0x06) +#define MPI2_EXT_IMAGE_TYPE_SUPPORTED_DEVICES (0x07) +#define MPI2_EXT_IMAGE_TYPE_MEGARAID (0x08) + +#define MPI2_EXT_IMAGE_TYPE_MAX (MPI2_EXT_IMAGE_TYPE_MEGARAID) + + + +/* FLASH Layout Extended Image Data */ + +/* + * Host code (drivers, BIOS, utilities, etc.) should leave this define set to + * one and check RegionsPerLayout at runtime. + */ +#ifndef MPI2_FLASH_NUMBER_OF_REGIONS +#define MPI2_FLASH_NUMBER_OF_REGIONS (1) +#endif + +/* + * Host code (drivers, BIOS, utilities, etc.) should leave this define set to + * one and check NumberOfLayouts at runtime. + */ +#ifndef MPI2_FLASH_NUMBER_OF_LAYOUTS +#define MPI2_FLASH_NUMBER_OF_LAYOUTS (1) +#endif + +typedef struct _MPI2_FLASH_REGION +{ + U8 RegionType; /* 0x00 */ + U8 Reserved1; /* 0x01 */ + U16 Reserved2; /* 0x02 */ + U32 RegionOffset; /* 0x04 */ + U32 RegionSize; /* 0x08 */ + U32 Reserved3; /* 0x0C */ +} MPI2_FLASH_REGION, MPI2_POINTER PTR_MPI2_FLASH_REGION, + Mpi2FlashRegion_t, MPI2_POINTER pMpi2FlashRegion_t; + +typedef struct _MPI2_FLASH_LAYOUT +{ + U32 FlashSize; /* 0x00 */ + U32 Reserved1; /* 0x04 */ + U32 Reserved2; /* 0x08 */ + U32 Reserved3; /* 0x0C */ + MPI2_FLASH_REGION Region[MPI2_FLASH_NUMBER_OF_REGIONS];/* 0x10 */ +} MPI2_FLASH_LAYOUT, MPI2_POINTER PTR_MPI2_FLASH_LAYOUT, + Mpi2FlashLayout_t, MPI2_POINTER pMpi2FlashLayout_t; + +typedef struct _MPI2_FLASH_LAYOUT_DATA +{ + U8 ImageRevision; /* 0x00 */ + U8 Reserved1; /* 0x01 */ + U8 SizeOfRegion; /* 0x02 */ + U8 Reserved2; /* 0x03 */ + U16 NumberOfLayouts; /* 0x04 */ + U16 RegionsPerLayout; /* 0x06 */ + U16 MinimumSectorAlignment; /* 0x08 */ + U16 Reserved3; /* 0x0A */ + U32 Reserved4; /* 0x0C */ + MPI2_FLASH_LAYOUT Layout[MPI2_FLASH_NUMBER_OF_LAYOUTS];/* 0x10 */ +} MPI2_FLASH_LAYOUT_DATA, MPI2_POINTER PTR_MPI2_FLASH_LAYOUT_DATA, + Mpi2FlashLayoutData_t, MPI2_POINTER pMpi2FlashLayoutData_t; + +/* defines for the RegionType field */ +#define MPI2_FLASH_REGION_UNUSED (0x00) +#define MPI2_FLASH_REGION_FIRMWARE (0x01) +#define MPI2_FLASH_REGION_BIOS (0x02) +#define MPI2_FLASH_REGION_NVDATA (0x03) +#define MPI2_FLASH_REGION_FIRMWARE_BACKUP (0x05) +#define MPI2_FLASH_REGION_MFG_INFORMATION (0x06) +#define MPI2_FLASH_REGION_CONFIG_1 (0x07) +#define MPI2_FLASH_REGION_CONFIG_2 (0x08) +#define MPI2_FLASH_REGION_MEGARAID (0x09) +#define MPI2_FLASH_REGION_INIT (0x0A) + +/* ImageRevision */ +#define MPI2_FLASH_LAYOUT_IMAGE_REVISION (0x00) + + + +/* Supported Devices Extended Image Data */ + +/* + * Host code (drivers, BIOS, utilities, etc.) should leave this define set to + * one and check NumberOfDevices at runtime. + */ +#ifndef MPI2_SUPPORTED_DEVICES_IMAGE_NUM_DEVICES +#define MPI2_SUPPORTED_DEVICES_IMAGE_NUM_DEVICES (1) +#endif + +typedef struct _MPI2_SUPPORTED_DEVICE +{ + U16 DeviceID; /* 0x00 */ + U16 VendorID; /* 0x02 */ + U16 DeviceIDMask; /* 0x04 */ + U16 Reserved1; /* 0x06 */ + U8 LowPCIRev; /* 0x08 */ + U8 HighPCIRev; /* 0x09 */ + U16 Reserved2; /* 0x0A */ + U32 Reserved3; /* 0x0C */ +} MPI2_SUPPORTED_DEVICE, MPI2_POINTER PTR_MPI2_SUPPORTED_DEVICE, + Mpi2SupportedDevice_t, MPI2_POINTER pMpi2SupportedDevice_t; + +typedef struct _MPI2_SUPPORTED_DEVICES_DATA +{ + U8 ImageRevision; /* 0x00 */ + U8 Reserved1; /* 0x01 */ + U8 NumberOfDevices; /* 0x02 */ + U8 Reserved2; /* 0x03 */ + U32 Reserved3; /* 0x04 */ + MPI2_SUPPORTED_DEVICE SupportedDevice[MPI2_SUPPORTED_DEVICES_IMAGE_NUM_DEVICES]; /* 0x08 */ +} MPI2_SUPPORTED_DEVICES_DATA, MPI2_POINTER PTR_MPI2_SUPPORTED_DEVICES_DATA, + Mpi2SupportedDevicesData_t, MPI2_POINTER pMpi2SupportedDevicesData_t; + +/* ImageRevision */ +#define MPI2_SUPPORTED_DEVICES_IMAGE_REVISION (0x00) + + +/* Init Extended Image Data */ + +typedef struct _MPI2_INIT_IMAGE_FOOTER + +{ + U32 BootFlags; /* 0x00 */ + U32 ImageSize; /* 0x04 */ + U32 Signature0; /* 0x08 */ + U32 Signature1; /* 0x0C */ + U32 Signature2; /* 0x10 */ + U32 ResetVector; /* 0x14 */ +} MPI2_INIT_IMAGE_FOOTER, MPI2_POINTER PTR_MPI2_INIT_IMAGE_FOOTER, + Mpi2InitImageFooter_t, MPI2_POINTER pMpi2InitImageFooter_t; + +/* defines for the BootFlags field */ +#define MPI2_INIT_IMAGE_BOOTFLAGS_OFFSET (0x00) + +/* defines for the ImageSize field */ +#define MPI2_INIT_IMAGE_IMAGESIZE_OFFSET (0x04) + +/* defines for the Signature0 field */ +#define MPI2_INIT_IMAGE_SIGNATURE0_OFFSET (0x08) +#define MPI2_INIT_IMAGE_SIGNATURE0 (0x5AA55AEA) + +/* defines for the Signature1 field */ +#define MPI2_INIT_IMAGE_SIGNATURE1_OFFSET (0x0C) +#define MPI2_INIT_IMAGE_SIGNATURE1 (0xA55AEAA5) + +/* defines for the Signature2 field */ +#define MPI2_INIT_IMAGE_SIGNATURE2_OFFSET (0x10) +#define MPI2_INIT_IMAGE_SIGNATURE2 (0x5AEAA55A) + +/* Signature fields as individual bytes */ +#define MPI2_INIT_IMAGE_SIGNATURE_BYTE_0 (0xEA) +#define MPI2_INIT_IMAGE_SIGNATURE_BYTE_1 (0x5A) +#define MPI2_INIT_IMAGE_SIGNATURE_BYTE_2 (0xA5) +#define MPI2_INIT_IMAGE_SIGNATURE_BYTE_3 (0x5A) + +#define MPI2_INIT_IMAGE_SIGNATURE_BYTE_4 (0xA5) +#define MPI2_INIT_IMAGE_SIGNATURE_BYTE_5 (0xEA) +#define MPI2_INIT_IMAGE_SIGNATURE_BYTE_6 (0x5A) +#define MPI2_INIT_IMAGE_SIGNATURE_BYTE_7 (0xA5) + +#define MPI2_INIT_IMAGE_SIGNATURE_BYTE_8 (0x5A) +#define MPI2_INIT_IMAGE_SIGNATURE_BYTE_9 (0xA5) +#define MPI2_INIT_IMAGE_SIGNATURE_BYTE_A (0xEA) +#define MPI2_INIT_IMAGE_SIGNATURE_BYTE_B (0x5A) + +/* defines for the ResetVector field */ +#define MPI2_INIT_IMAGE_RESETVECTOR_OFFSET (0x14) + + +#endif + diff --git a/drivers/scsi/mpt2sas/mpi/mpi2_raid.h b/drivers/scsi/mpt2sas/mpi/mpi2_raid.h new file mode 100644 index 0000000..7134816d --- /dev/null +++ b/drivers/scsi/mpt2sas/mpi/mpi2_raid.h @@ -0,0 +1,295 @@ +/* + * Copyright (c) 2000-2008 LSI Corporation. + * + * + * Name: mpi2_raid.h + * Title: MPI Integrated RAID messages and structures + * Creation Date: April 26, 2007 + * + * mpi2_raid.h Version: 02.00.03 + * + * Version History + * --------------- + * + * Date Version Description + * -------- -------- ------------------------------------------------------ + * 04-30-07 02.00.00 Corresponds to Fusion-MPT MPI Specification Rev A. + * 08-31-07 02.00.01 Modifications to RAID Action request and reply, + * including the Actions and ActionData. + * 02-29-08 02.00.02 Added MPI2_RAID_ACTION_ADATA_DISABL_FULL_REBUILD. + * 05-21-08 02.00.03 Added MPI2_RAID_VOL_CREATION_NUM_PHYSDISKS so that + * the PhysDisk array in MPI2_RAID_VOLUME_CREATION_STRUCT + * can be sized by the build environment. + * -------------------------------------------------------------------------- + */ + +#ifndef MPI2_RAID_H +#define MPI2_RAID_H + +/***************************************************************************** +* +* Integrated RAID Messages +* +*****************************************************************************/ + +/**************************************************************************** +* RAID Action messages +****************************************************************************/ + +/* ActionDataWord defines for use with MPI2_RAID_ACTION_DELETE_VOLUME action */ +#define MPI2_RAID_ACTION_ADATA_KEEP_LBA0 (0x00000000) +#define MPI2_RAID_ACTION_ADATA_ZERO_LBA0 (0x00000001) + +/* use MPI2_RAIDVOL0_SETTING_ defines from mpi2_cnfg.h for MPI2_RAID_ACTION_CHANGE_VOL_WRITE_CACHE action */ + +/* ActionDataWord defines for use with MPI2_RAID_ACTION_DISABLE_ALL_VOLUMES action */ +#define MPI2_RAID_ACTION_ADATA_DISABL_FULL_REBUILD (0x00000001) + +/* ActionDataWord for MPI2_RAID_ACTION_SET_RAID_FUNCTION_RATE Action */ +typedef struct _MPI2_RAID_ACTION_RATE_DATA +{ + U8 RateToChange; /* 0x00 */ + U8 RateOrMode; /* 0x01 */ + U16 DataScrubDuration; /* 0x02 */ +} MPI2_RAID_ACTION_RATE_DATA, MPI2_POINTER PTR_MPI2_RAID_ACTION_RATE_DATA, + Mpi2RaidActionRateData_t, MPI2_POINTER pMpi2RaidActionRateData_t; + +#define MPI2_RAID_ACTION_SET_RATE_RESYNC (0x00) +#define MPI2_RAID_ACTION_SET_RATE_DATA_SCRUB (0x01) +#define MPI2_RAID_ACTION_SET_RATE_POWERSAVE_MODE (0x02) + +/* ActionDataWord for MPI2_RAID_ACTION_START_RAID_FUNCTION Action */ +typedef struct _MPI2_RAID_ACTION_START_RAID_FUNCTION +{ + U8 RAIDFunction; /* 0x00 */ + U8 Flags; /* 0x01 */ + U16 Reserved1; /* 0x02 */ +} MPI2_RAID_ACTION_START_RAID_FUNCTION, + MPI2_POINTER PTR_MPI2_RAID_ACTION_START_RAID_FUNCTION, + Mpi2RaidActionStartRaidFunction_t, + MPI2_POINTER pMpi2RaidActionStartRaidFunction_t; + +/* defines for the RAIDFunction field */ +#define MPI2_RAID_ACTION_START_BACKGROUND_INIT (0x00) +#define MPI2_RAID_ACTION_START_ONLINE_CAP_EXPANSION (0x01) +#define MPI2_RAID_ACTION_START_CONSISTENCY_CHECK (0x02) + +/* defines for the Flags field */ +#define MPI2_RAID_ACTION_START_NEW (0x00) +#define MPI2_RAID_ACTION_START_RESUME (0x01) + +/* ActionDataWord for MPI2_RAID_ACTION_STOP_RAID_FUNCTION Action */ +typedef struct _MPI2_RAID_ACTION_STOP_RAID_FUNCTION +{ + U8 RAIDFunction; /* 0x00 */ + U8 Flags; /* 0x01 */ + U16 Reserved1; /* 0x02 */ +} MPI2_RAID_ACTION_STOP_RAID_FUNCTION, + MPI2_POINTER PTR_MPI2_RAID_ACTION_STOP_RAID_FUNCTION, + Mpi2RaidActionStopRaidFunction_t, + MPI2_POINTER pMpi2RaidActionStopRaidFunction_t; + +/* defines for the RAIDFunction field */ +#define MPI2_RAID_ACTION_STOP_BACKGROUND_INIT (0x00) +#define MPI2_RAID_ACTION_STOP_ONLINE_CAP_EXPANSION (0x01) +#define MPI2_RAID_ACTION_STOP_CONSISTENCY_CHECK (0x02) + +/* defines for the Flags field */ +#define MPI2_RAID_ACTION_STOP_ABORT (0x00) +#define MPI2_RAID_ACTION_STOP_PAUSE (0x01) + +/* ActionDataWord for MPI2_RAID_ACTION_CREATE_HOT_SPARE Action */ +typedef struct _MPI2_RAID_ACTION_HOT_SPARE +{ + U8 HotSparePool; /* 0x00 */ + U8 Reserved1; /* 0x01 */ + U16 DevHandle; /* 0x02 */ +} MPI2_RAID_ACTION_HOT_SPARE, MPI2_POINTER PTR_MPI2_RAID_ACTION_HOT_SPARE, + Mpi2RaidActionHotSpare_t, MPI2_POINTER pMpi2RaidActionHotSpare_t; + +/* ActionDataWord for MPI2_RAID_ACTION_DEVICE_FW_UPDATE_MODE Action */ +typedef struct _MPI2_RAID_ACTION_FW_UPDATE_MODE +{ + U8 Flags; /* 0x00 */ + U8 DeviceFirmwareUpdateModeTimeout; /* 0x01 */ + U16 Reserved1; /* 0x02 */ +} MPI2_RAID_ACTION_FW_UPDATE_MODE, + MPI2_POINTER PTR_MPI2_RAID_ACTION_FW_UPDATE_MODE, + Mpi2RaidActionFwUpdateMode_t, MPI2_POINTER pMpi2RaidActionFwUpdateMode_t; + +/* ActionDataWord defines for use with MPI2_RAID_ACTION_DEVICE_FW_UPDATE_MODE action */ +#define MPI2_RAID_ACTION_ADATA_DISABLE_FW_UPDATE (0x00) +#define MPI2_RAID_ACTION_ADATA_ENABLE_FW_UPDATE (0x01) + +typedef union _MPI2_RAID_ACTION_DATA +{ + U32 Word; + MPI2_RAID_ACTION_RATE_DATA Rates; + MPI2_RAID_ACTION_START_RAID_FUNCTION StartRaidFunction; + MPI2_RAID_ACTION_STOP_RAID_FUNCTION StopRaidFunction; + MPI2_RAID_ACTION_HOT_SPARE HotSpare; + MPI2_RAID_ACTION_FW_UPDATE_MODE FwUpdateMode; +} MPI2_RAID_ACTION_DATA, MPI2_POINTER PTR_MPI2_RAID_ACTION_DATA, + Mpi2RaidActionData_t, MPI2_POINTER pMpi2RaidActionData_t; + + +/* RAID Action Request Message */ +typedef struct _MPI2_RAID_ACTION_REQUEST +{ + U8 Action; /* 0x00 */ + U8 Reserved1; /* 0x01 */ + U8 ChainOffset; /* 0x02 */ + U8 Function; /* 0x03 */ + U16 VolDevHandle; /* 0x04 */ + U8 PhysDiskNum; /* 0x06 */ + U8 MsgFlags; /* 0x07 */ + U8 VP_ID; /* 0x08 */ + U8 VF_ID; /* 0x09 */ + U16 Reserved2; /* 0x0A */ + U32 Reserved3; /* 0x0C */ + MPI2_RAID_ACTION_DATA ActionDataWord; /* 0x10 */ + MPI2_SGE_SIMPLE_UNION ActionDataSGE; /* 0x14 */ +} MPI2_RAID_ACTION_REQUEST, MPI2_POINTER PTR_MPI2_RAID_ACTION_REQUEST, + Mpi2RaidActionRequest_t, MPI2_POINTER pMpi2RaidActionRequest_t; + +/* RAID Action request Action values */ + +#define MPI2_RAID_ACTION_INDICATOR_STRUCT (0x01) +#define MPI2_RAID_ACTION_CREATE_VOLUME (0x02) +#define MPI2_RAID_ACTION_DELETE_VOLUME (0x03) +#define MPI2_RAID_ACTION_DISABLE_ALL_VOLUMES (0x04) +#define MPI2_RAID_ACTION_ENABLE_ALL_VOLUMES (0x05) +#define MPI2_RAID_ACTION_PHYSDISK_OFFLINE (0x0A) +#define MPI2_RAID_ACTION_PHYSDISK_ONLINE (0x0B) +#define MPI2_RAID_ACTION_FAIL_PHYSDISK (0x0F) +#define MPI2_RAID_ACTION_ACTIVATE_VOLUME (0x11) +#define MPI2_RAID_ACTION_DEVICE_FW_UPDATE_MODE (0x15) +#define MPI2_RAID_ACTION_CHANGE_VOL_WRITE_CACHE (0x17) +#define MPI2_RAID_ACTION_SET_VOLUME_NAME (0x18) +#define MPI2_RAID_ACTION_SET_RAID_FUNCTION_RATE (0x19) +#define MPI2_RAID_ACTION_ENABLE_FAILED_VOLUME (0x1C) +#define MPI2_RAID_ACTION_CREATE_HOT_SPARE (0x1D) +#define MPI2_RAID_ACTION_DELETE_HOT_SPARE (0x1E) +#define MPI2_RAID_ACTION_SYSTEM_SHUTDOWN_INITIATED (0x20) +#define MPI2_RAID_ACTION_START_RAID_FUNCTION (0x21) +#define MPI2_RAID_ACTION_STOP_RAID_FUNCTION (0x22) + + +/* RAID Volume Creation Structure */ + +/* + * The following define can be customized for the targeted product. + */ +#ifndef MPI2_RAID_VOL_CREATION_NUM_PHYSDISKS +#define MPI2_RAID_VOL_CREATION_NUM_PHYSDISKS (1) +#endif + +typedef struct _MPI2_RAID_VOLUME_PHYSDISK +{ + U8 RAIDSetNum; /* 0x00 */ + U8 PhysDiskMap; /* 0x01 */ + U16 PhysDiskDevHandle; /* 0x02 */ +} MPI2_RAID_VOLUME_PHYSDISK, MPI2_POINTER PTR_MPI2_RAID_VOLUME_PHYSDISK, + Mpi2RaidVolumePhysDisk_t, MPI2_POINTER pMpi2RaidVolumePhysDisk_t; + +/* defines for the PhysDiskMap field */ +#define MPI2_RAIDACTION_PHYSDISK_PRIMARY (0x01) +#define MPI2_RAIDACTION_PHYSDISK_SECONDARY (0x02) + +typedef struct _MPI2_RAID_VOLUME_CREATION_STRUCT +{ + U8 NumPhysDisks; /* 0x00 */ + U8 VolumeType; /* 0x01 */ + U16 Reserved1; /* 0x02 */ + U32 VolumeCreationFlags; /* 0x04 */ + U32 VolumeSettings; /* 0x08 */ + U8 Reserved2; /* 0x0C */ + U8 ResyncRate; /* 0x0D */ + U16 DataScrubDuration; /* 0x0E */ + U64 VolumeMaxLBA; /* 0x10 */ + U32 StripeSize; /* 0x18 */ + U8 Name[16]; /* 0x1C */ + MPI2_RAID_VOLUME_PHYSDISK PhysDisk[MPI2_RAID_VOL_CREATION_NUM_PHYSDISKS];/* 0x2C */ +} MPI2_RAID_VOLUME_CREATION_STRUCT, + MPI2_POINTER PTR_MPI2_RAID_VOLUME_CREATION_STRUCT, + Mpi2RaidVolumeCreationStruct_t, MPI2_POINTER pMpi2RaidVolumeCreationStruct_t; + +/* use MPI2_RAID_VOL_TYPE_ defines from mpi2_cnfg.h for VolumeType */ + +/* defines for the VolumeCreationFlags field */ +#define MPI2_RAID_VOL_CREATION_USE_DEFAULT_SETTINGS (0x80) +#define MPI2_RAID_VOL_CREATION_BACKGROUND_INIT (0x04) +#define MPI2_RAID_VOL_CREATION_LOW_LEVEL_INIT (0x02) +#define MPI2_RAID_VOL_CREATION_MIGRATE_DATA (0x01) + + +/* RAID Online Capacity Expansion Structure */ + +typedef struct _MPI2_RAID_ONLINE_CAPACITY_EXPANSION +{ + U32 Flags; /* 0x00 */ + U16 DevHandle0; /* 0x04 */ + U16 Reserved1; /* 0x06 */ + U16 DevHandle1; /* 0x08 */ + U16 Reserved2; /* 0x0A */ +} MPI2_RAID_ONLINE_CAPACITY_EXPANSION, + MPI2_POINTER PTR_MPI2_RAID_ONLINE_CAPACITY_EXPANSION, + Mpi2RaidOnlineCapacityExpansion_t, + MPI2_POINTER pMpi2RaidOnlineCapacityExpansion_t; + + +/* RAID Volume Indicator Structure */ + +typedef struct _MPI2_RAID_VOL_INDICATOR +{ + U64 TotalBlocks; /* 0x00 */ + U64 BlocksRemaining; /* 0x08 */ + U32 Flags; /* 0x10 */ +} MPI2_RAID_VOL_INDICATOR, MPI2_POINTER PTR_MPI2_RAID_VOL_INDICATOR, + Mpi2RaidVolIndicator_t, MPI2_POINTER pMpi2RaidVolIndicator_t; + +/* defines for RAID Volume Indicator Flags field */ +#define MPI2_RAID_VOL_FLAGS_OP_MASK (0x0000000F) +#define MPI2_RAID_VOL_FLAGS_OP_BACKGROUND_INIT (0x00000000) +#define MPI2_RAID_VOL_FLAGS_OP_ONLINE_CAP_EXPANSION (0x00000001) +#define MPI2_RAID_VOL_FLAGS_OP_CONSISTENCY_CHECK (0x00000002) +#define MPI2_RAID_VOL_FLAGS_OP_RESYNC (0x00000003) + + +/* RAID Action Reply ActionData union */ +typedef union _MPI2_RAID_ACTION_REPLY_DATA +{ + U32 Word[5]; + MPI2_RAID_VOL_INDICATOR RaidVolumeIndicator; + U16 VolDevHandle; + U8 VolumeState; + U8 PhysDiskNum; +} MPI2_RAID_ACTION_REPLY_DATA, MPI2_POINTER PTR_MPI2_RAID_ACTION_REPLY_DATA, + Mpi2RaidActionReplyData_t, MPI2_POINTER pMpi2RaidActionReplyData_t; + +/* use MPI2_RAIDVOL0_SETTING_ defines from mpi2_cnfg.h for MPI2_RAID_ACTION_CHANGE_VOL_WRITE_CACHE action */ + + +/* RAID Action Reply Message */ +typedef struct _MPI2_RAID_ACTION_REPLY +{ + U8 Action; /* 0x00 */ + U8 Reserved1; /* 0x01 */ + U8 MsgLength; /* 0x02 */ + U8 Function; /* 0x03 */ + U16 VolDevHandle; /* 0x04 */ + U8 PhysDiskNum; /* 0x06 */ + U8 MsgFlags; /* 0x07 */ + U8 VP_ID; /* 0x08 */ + U8 VF_ID; /* 0x09 */ + U16 Reserved2; /* 0x0A */ + U16 Reserved3; /* 0x0C */ + U16 IOCStatus; /* 0x0E */ + U32 IOCLogInfo; /* 0x10 */ + MPI2_RAID_ACTION_REPLY_DATA ActionData; /* 0x14 */ +} MPI2_RAID_ACTION_REPLY, MPI2_POINTER PTR_MPI2_RAID_ACTION_REPLY, + Mpi2RaidActionReply_t, MPI2_POINTER pMpi2RaidActionReply_t; + + +#endif + diff --git a/drivers/scsi/mpt2sas/mpi/mpi2_sas.h b/drivers/scsi/mpt2sas/mpi/mpi2_sas.h new file mode 100644 index 0000000..8a42b13 --- /dev/null +++ b/drivers/scsi/mpt2sas/mpi/mpi2_sas.h @@ -0,0 +1,282 @@ +/* + * Copyright (c) 2000-2007 LSI Corporation. + * + * + * Name: mpi2_sas.h + * Title: MPI Serial Attached SCSI structures and definitions + * Creation Date: February 9, 2007 + * + * mpi2.h Version: 02.00.02 + * + * Version History + * --------------- + * + * Date Version Description + * -------- -------- ------------------------------------------------------ + * 04-30-07 02.00.00 Corresponds to Fusion-MPT MPI Specification Rev A. + * 06-26-07 02.00.01 Added Clear All Persistent Operation to SAS IO Unit + * Control Request. + * 10-02-08 02.00.02 Added Set IOC Parameter Operation to SAS IO Unit Control + * Request. + * -------------------------------------------------------------------------- + */ + +#ifndef MPI2_SAS_H +#define MPI2_SAS_H + +/* + * Values for SASStatus. + */ +#define MPI2_SASSTATUS_SUCCESS (0x00) +#define MPI2_SASSTATUS_UNKNOWN_ERROR (0x01) +#define MPI2_SASSTATUS_INVALID_FRAME (0x02) +#define MPI2_SASSTATUS_UTC_BAD_DEST (0x03) +#define MPI2_SASSTATUS_UTC_BREAK_RECEIVED (0x04) +#define MPI2_SASSTATUS_UTC_CONNECT_RATE_NOT_SUPPORTED (0x05) +#define MPI2_SASSTATUS_UTC_PORT_LAYER_REQUEST (0x06) +#define MPI2_SASSTATUS_UTC_PROTOCOL_NOT_SUPPORTED (0x07) +#define MPI2_SASSTATUS_UTC_STP_RESOURCES_BUSY (0x08) +#define MPI2_SASSTATUS_UTC_WRONG_DESTINATION (0x09) +#define MPI2_SASSTATUS_SHORT_INFORMATION_UNIT (0x0A) +#define MPI2_SASSTATUS_LONG_INFORMATION_UNIT (0x0B) +#define MPI2_SASSTATUS_XFER_RDY_INCORRECT_WRITE_DATA (0x0C) +#define MPI2_SASSTATUS_XFER_RDY_REQUEST_OFFSET_ERROR (0x0D) +#define MPI2_SASSTATUS_XFER_RDY_NOT_EXPECTED (0x0E) +#define MPI2_SASSTATUS_DATA_INCORRECT_DATA_LENGTH (0x0F) +#define MPI2_SASSTATUS_DATA_TOO_MUCH_READ_DATA (0x10) +#define MPI2_SASSTATUS_DATA_OFFSET_ERROR (0x11) +#define MPI2_SASSTATUS_SDSF_NAK_RECEIVED (0x12) +#define MPI2_SASSTATUS_SDSF_CONNECTION_FAILED (0x13) +#define MPI2_SASSTATUS_INITIATOR_RESPONSE_TIMEOUT (0x14) + + +/* + * Values for the SAS DeviceInfo field used in SAS Device Status Change Event + * data and SAS Configuration pages. + */ +#define MPI2_SAS_DEVICE_INFO_SEP (0x00004000) +#define MPI2_SAS_DEVICE_INFO_ATAPI_DEVICE (0x00002000) +#define MPI2_SAS_DEVICE_INFO_LSI_DEVICE (0x00001000) +#define MPI2_SAS_DEVICE_INFO_DIRECT_ATTACH (0x00000800) +#define MPI2_SAS_DEVICE_INFO_SSP_TARGET (0x00000400) +#define MPI2_SAS_DEVICE_INFO_STP_TARGET (0x00000200) +#define MPI2_SAS_DEVICE_INFO_SMP_TARGET (0x00000100) +#define MPI2_SAS_DEVICE_INFO_SATA_DEVICE (0x00000080) +#define MPI2_SAS_DEVICE_INFO_SSP_INITIATOR (0x00000040) +#define MPI2_SAS_DEVICE_INFO_STP_INITIATOR (0x00000020) +#define MPI2_SAS_DEVICE_INFO_SMP_INITIATOR (0x00000010) +#define MPI2_SAS_DEVICE_INFO_SATA_HOST (0x00000008) + +#define MPI2_SAS_DEVICE_INFO_MASK_DEVICE_TYPE (0x00000007) +#define MPI2_SAS_DEVICE_INFO_NO_DEVICE (0x00000000) +#define MPI2_SAS_DEVICE_INFO_END_DEVICE (0x00000001) +#define MPI2_SAS_DEVICE_INFO_EDGE_EXPANDER (0x00000002) +#define MPI2_SAS_DEVICE_INFO_FANOUT_EXPANDER (0x00000003) + + +/***************************************************************************** +* +* SAS Messages +* +*****************************************************************************/ + +/**************************************************************************** +* SMP Passthrough messages +****************************************************************************/ + +/* SMP Passthrough Request Message */ +typedef struct _MPI2_SMP_PASSTHROUGH_REQUEST +{ + U8 PassthroughFlags; /* 0x00 */ + U8 PhysicalPort; /* 0x01 */ + U8 ChainOffset; /* 0x02 */ + U8 Function; /* 0x03 */ + U16 RequestDataLength; /* 0x04 */ + U8 SGLFlags; /* 0x06 */ + U8 MsgFlags; /* 0x07 */ + U8 VP_ID; /* 0x08 */ + U8 VF_ID; /* 0x09 */ + U16 Reserved1; /* 0x0A */ + U32 Reserved2; /* 0x0C */ + U64 SASAddress; /* 0x10 */ + U32 Reserved3; /* 0x18 */ + U32 Reserved4; /* 0x1C */ + MPI2_SIMPLE_SGE_UNION SGL; /* 0x20 */ +} MPI2_SMP_PASSTHROUGH_REQUEST, MPI2_POINTER PTR_MPI2_SMP_PASSTHROUGH_REQUEST, + Mpi2SmpPassthroughRequest_t, MPI2_POINTER pMpi2SmpPassthroughRequest_t; + +/* values for PassthroughFlags field */ +#define MPI2_SMP_PT_REQ_PT_FLAGS_IMMEDIATE (0x80) + +/* values for SGLFlags field are in the SGL section of mpi2.h */ + + +/* SMP Passthrough Reply Message */ +typedef struct _MPI2_SMP_PASSTHROUGH_REPLY +{ + U8 PassthroughFlags; /* 0x00 */ + U8 PhysicalPort; /* 0x01 */ + U8 MsgLength; /* 0x02 */ + U8 Function; /* 0x03 */ + U16 ResponseDataLength; /* 0x04 */ + U8 SGLFlags; /* 0x06 */ + U8 MsgFlags; /* 0x07 */ + U8 VP_ID; /* 0x08 */ + U8 VF_ID; /* 0x09 */ + U16 Reserved1; /* 0x0A */ + U8 Reserved2; /* 0x0C */ + U8 SASStatus; /* 0x0D */ + U16 IOCStatus; /* 0x0E */ + U32 IOCLogInfo; /* 0x10 */ + U32 Reserved3; /* 0x14 */ + U8 ResponseData[4]; /* 0x18 */ +} MPI2_SMP_PASSTHROUGH_REPLY, MPI2_POINTER PTR_MPI2_SMP_PASSTHROUGH_REPLY, + Mpi2SmpPassthroughReply_t, MPI2_POINTER pMpi2SmpPassthroughReply_t; + +/* values for PassthroughFlags field */ +#define MPI2_SMP_PT_REPLY_PT_FLAGS_IMMEDIATE (0x80) + +/* values for SASStatus field are at the top of this file */ + + +/**************************************************************************** +* SATA Passthrough messages +****************************************************************************/ + +/* SATA Passthrough Request Message */ +typedef struct _MPI2_SATA_PASSTHROUGH_REQUEST +{ + U16 DevHandle; /* 0x00 */ + U8 ChainOffset; /* 0x02 */ + U8 Function; /* 0x03 */ + U16 PassthroughFlags; /* 0x04 */ + U8 SGLFlags; /* 0x06 */ + U8 MsgFlags; /* 0x07 */ + U8 VP_ID; /* 0x08 */ + U8 VF_ID; /* 0x09 */ + U16 Reserved1; /* 0x0A */ + U32 Reserved2; /* 0x0C */ + U32 Reserved3; /* 0x10 */ + U32 Reserved4; /* 0x14 */ + U32 DataLength; /* 0x18 */ + U8 CommandFIS[20]; /* 0x1C */ + MPI2_SIMPLE_SGE_UNION SGL; /* 0x20 */ +} MPI2_SATA_PASSTHROUGH_REQUEST, MPI2_POINTER PTR_MPI2_SATA_PASSTHROUGH_REQUEST, + Mpi2SataPassthroughRequest_t, MPI2_POINTER pMpi2SataPassthroughRequest_t; + +/* values for PassthroughFlags field */ +#define MPI2_SATA_PT_REQ_PT_FLAGS_EXECUTE_DIAG (0x0100) +#define MPI2_SATA_PT_REQ_PT_FLAGS_DMA (0x0020) +#define MPI2_SATA_PT_REQ_PT_FLAGS_PIO (0x0010) +#define MPI2_SATA_PT_REQ_PT_FLAGS_UNSPECIFIED_VU (0x0004) +#define MPI2_SATA_PT_REQ_PT_FLAGS_WRITE (0x0002) +#define MPI2_SATA_PT_REQ_PT_FLAGS_READ (0x0001) + +/* values for SGLFlags field are in the SGL section of mpi2.h */ + + +/* SATA Passthrough Reply Message */ +typedef struct _MPI2_SATA_PASSTHROUGH_REPLY +{ + U16 DevHandle; /* 0x00 */ + U8 MsgLength; /* 0x02 */ + U8 Function; /* 0x03 */ + U16 PassthroughFlags; /* 0x04 */ + U8 SGLFlags; /* 0x06 */ + U8 MsgFlags; /* 0x07 */ + U8 VP_ID; /* 0x08 */ + U8 VF_ID; /* 0x09 */ + U16 Reserved1; /* 0x0A */ + U8 Reserved2; /* 0x0C */ + U8 SASStatus; /* 0x0D */ + U16 IOCStatus; /* 0x0E */ + U32 IOCLogInfo; /* 0x10 */ + U8 StatusFIS[20]; /* 0x14 */ + U32 StatusControlRegisters; /* 0x28 */ + U32 TransferCount; /* 0x2C */ +} MPI2_SATA_PASSTHROUGH_REPLY, MPI2_POINTER PTR_MPI2_SATA_PASSTHROUGH_REPLY, + Mpi2SataPassthroughReply_t, MPI2_POINTER pMpi2SataPassthroughReply_t; + +/* values for SASStatus field are at the top of this file */ + + +/**************************************************************************** +* SAS IO Unit Control messages +****************************************************************************/ + +/* SAS IO Unit Control Request Message */ +typedef struct _MPI2_SAS_IOUNIT_CONTROL_REQUEST +{ + U8 Operation; /* 0x00 */ + U8 Reserved1; /* 0x01 */ + U8 ChainOffset; /* 0x02 */ + U8 Function; /* 0x03 */ + U16 DevHandle; /* 0x04 */ + U8 IOCParameter; /* 0x06 */ + U8 MsgFlags; /* 0x07 */ + U8 VP_ID; /* 0x08 */ + U8 VF_ID; /* 0x09 */ + U16 Reserved3; /* 0x0A */ + U16 Reserved4; /* 0x0C */ + U8 PhyNum; /* 0x0E */ + U8 PrimFlags; /* 0x0F */ + U32 Primitive; /* 0x10 */ + U8 LookupMethod; /* 0x14 */ + U8 Reserved5; /* 0x15 */ + U16 SlotNumber; /* 0x16 */ + U64 LookupAddress; /* 0x18 */ + U32 IOCParameterValue; /* 0x20 */ + U32 Reserved7; /* 0x24 */ + U32 Reserved8; /* 0x28 */ +} MPI2_SAS_IOUNIT_CONTROL_REQUEST, + MPI2_POINTER PTR_MPI2_SAS_IOUNIT_CONTROL_REQUEST, + Mpi2SasIoUnitControlRequest_t, MPI2_POINTER pMpi2SasIoUnitControlRequest_t; + +/* values for the Operation field */ +#define MPI2_SAS_OP_CLEAR_ALL_PERSISTENT (0x02) +#define MPI2_SAS_OP_PHY_LINK_RESET (0x06) +#define MPI2_SAS_OP_PHY_HARD_RESET (0x07) +#define MPI2_SAS_OP_PHY_CLEAR_ERROR_LOG (0x08) +#define MPI2_SAS_OP_SEND_PRIMITIVE (0x0A) +#define MPI2_SAS_OP_FORCE_FULL_DISCOVERY (0x0B) +#define MPI2_SAS_OP_TRANSMIT_PORT_SELECT_SIGNAL (0x0C) +#define MPI2_SAS_OP_REMOVE_DEVICE (0x0D) +#define MPI2_SAS_OP_LOOKUP_MAPPING (0x0E) +#define MPI2_SAS_OP_SET_IOC_PARAMETER (0x0F) +#define MPI2_SAS_OP_PRODUCT_SPECIFIC_MIN (0x80) + +/* values for the PrimFlags field */ +#define MPI2_SAS_PRIMFLAGS_SINGLE (0x08) +#define MPI2_SAS_PRIMFLAGS_TRIPLE (0x02) +#define MPI2_SAS_PRIMFLAGS_REDUNDANT (0x01) + +/* values for the LookupMethod field */ +#define MPI2_SAS_LOOKUP_METHOD_SAS_ADDRESS (0x01) +#define MPI2_SAS_LOOKUP_METHOD_SAS_ENCLOSURE_SLOT (0x02) +#define MPI2_SAS_LOOKUP_METHOD_SAS_DEVICE_NAME (0x03) + + +/* SAS IO Unit Control Reply Message */ +typedef struct _MPI2_SAS_IOUNIT_CONTROL_REPLY +{ + U8 Operation; /* 0x00 */ + U8 Reserved1; /* 0x01 */ + U8 MsgLength; /* 0x02 */ + U8 Function; /* 0x03 */ + U16 DevHandle; /* 0x04 */ + U8 IOCParameter; /* 0x06 */ + U8 MsgFlags; /* 0x07 */ + U8 VP_ID; /* 0x08 */ + U8 VF_ID; /* 0x09 */ + U16 Reserved3; /* 0x0A */ + U16 Reserved4; /* 0x0C */ + U16 IOCStatus; /* 0x0E */ + U32 IOCLogInfo; /* 0x10 */ +} MPI2_SAS_IOUNIT_CONTROL_REPLY, + MPI2_POINTER PTR_MPI2_SAS_IOUNIT_CONTROL_REPLY, + Mpi2SasIoUnitControlReply_t, MPI2_POINTER pMpi2SasIoUnitControlReply_t; + + +#endif + + diff --git a/drivers/scsi/mpt2sas/mpi/mpi2_tool.h b/drivers/scsi/mpt2sas/mpi/mpi2_tool.h new file mode 100644 index 0000000..2ff4e93 --- /dev/null +++ b/drivers/scsi/mpt2sas/mpi/mpi2_tool.h @@ -0,0 +1,249 @@ +/* + * Copyright (c) 2000-2008 LSI Corporation. + * + * + * Name: mpi2_tool.h + * Title: MPI diagnostic tool structures and definitions + * Creation Date: March 26, 2007 + * + * mpi2_tool.h Version: 02.00.02 + * + * Version History + * --------------- + * + * Date Version Description + * -------- -------- ------------------------------------------------------ + * 04-30-07 02.00.00 Corresponds to Fusion-MPT MPI Specification Rev A. + * 12-18-07 02.00.01 Added Diagnostic Buffer Post and Diagnostic Release + * structures and defines. + * 02-29-08 02.00.02 Modified various names to make them 32-character unique. + * -------------------------------------------------------------------------- + */ + +#ifndef MPI2_TOOL_H +#define MPI2_TOOL_H + +/***************************************************************************** +* +* Toolbox Messages +* +*****************************************************************************/ + +/* defines for the Tools */ +#define MPI2_TOOLBOX_CLEAN_TOOL (0x00) +#define MPI2_TOOLBOX_MEMORY_MOVE_TOOL (0x01) +#define MPI2_TOOLBOX_BEACON_TOOL (0x05) + +/**************************************************************************** +* Toolbox reply +****************************************************************************/ + +typedef struct _MPI2_TOOLBOX_REPLY +{ + U8 Tool; /* 0x00 */ + U8 Reserved1; /* 0x01 */ + U8 MsgLength; /* 0x02 */ + U8 Function; /* 0x03 */ + U16 Reserved2; /* 0x04 */ + U8 Reserved3; /* 0x06 */ + U8 MsgFlags; /* 0x07 */ + U8 VP_ID; /* 0x08 */ + U8 VF_ID; /* 0x09 */ + U16 Reserved4; /* 0x0A */ + U16 Reserved5; /* 0x0C */ + U16 IOCStatus; /* 0x0E */ + U32 IOCLogInfo; /* 0x10 */ +} MPI2_TOOLBOX_REPLY, MPI2_POINTER PTR_MPI2_TOOLBOX_REPLY, + Mpi2ToolboxReply_t, MPI2_POINTER pMpi2ToolboxReply_t; + + +/**************************************************************************** +* Toolbox Clean Tool request +****************************************************************************/ + +typedef struct _MPI2_TOOLBOX_CLEAN_REQUEST +{ + U8 Tool; /* 0x00 */ + U8 Reserved1; /* 0x01 */ + U8 ChainOffset; /* 0x02 */ + U8 Function; /* 0x03 */ + U16 Reserved2; /* 0x04 */ + U8 Reserved3; /* 0x06 */ + U8 MsgFlags; /* 0x07 */ + U8 VP_ID; /* 0x08 */ + U8 VF_ID; /* 0x09 */ + U16 Reserved4; /* 0x0A */ + U32 Flags; /* 0x0C */ + } MPI2_TOOLBOX_CLEAN_REQUEST, MPI2_POINTER PTR_MPI2_TOOLBOX_CLEAN_REQUEST, + Mpi2ToolboxCleanRequest_t, MPI2_POINTER pMpi2ToolboxCleanRequest_t; + +/* values for the Flags field */ +#define MPI2_TOOLBOX_CLEAN_BOOT_SERVICES (0x80000000) +#define MPI2_TOOLBOX_CLEAN_PERSIST_MANUFACT_PAGES (0x40000000) +#define MPI2_TOOLBOX_CLEAN_OTHER_PERSIST_PAGES (0x20000000) +#define MPI2_TOOLBOX_CLEAN_FW_CURRENT (0x10000000) +#define MPI2_TOOLBOX_CLEAN_FW_BACKUP (0x08000000) +#define MPI2_TOOLBOX_CLEAN_MEGARAID (0x02000000) +#define MPI2_TOOLBOX_CLEAN_INITIALIZATION (0x01000000) +#define MPI2_TOOLBOX_CLEAN_FLASH (0x00000004) +#define MPI2_TOOLBOX_CLEAN_SEEPROM (0x00000002) +#define MPI2_TOOLBOX_CLEAN_NVSRAM (0x00000001) + + +/**************************************************************************** +* Toolbox Memory Move request +****************************************************************************/ + +typedef struct _MPI2_TOOLBOX_MEM_MOVE_REQUEST +{ + U8 Tool; /* 0x00 */ + U8 Reserved1; /* 0x01 */ + U8 ChainOffset; /* 0x02 */ + U8 Function; /* 0x03 */ + U16 Reserved2; /* 0x04 */ + U8 Reserved3; /* 0x06 */ + U8 MsgFlags; /* 0x07 */ + U8 VP_ID; /* 0x08 */ + U8 VF_ID; /* 0x09 */ + U16 Reserved4; /* 0x0A */ + MPI2_SGE_SIMPLE_UNION SGL; /* 0x0C */ +} MPI2_TOOLBOX_MEM_MOVE_REQUEST, MPI2_POINTER PTR_MPI2_TOOLBOX_MEM_MOVE_REQUEST, + Mpi2ToolboxMemMoveRequest_t, MPI2_POINTER pMpi2ToolboxMemMoveRequest_t; + + +/**************************************************************************** +* Toolbox Beacon Tool request +****************************************************************************/ + +typedef struct _MPI2_TOOLBOX_BEACON_REQUEST +{ + U8 Tool; /* 0x00 */ + U8 Reserved1; /* 0x01 */ + U8 ChainOffset; /* 0x02 */ + U8 Function; /* 0x03 */ + U16 Reserved2; /* 0x04 */ + U8 Reserved3; /* 0x06 */ + U8 MsgFlags; /* 0x07 */ + U8 VP_ID; /* 0x08 */ + U8 VF_ID; /* 0x09 */ + U16 Reserved4; /* 0x0A */ + U8 Reserved5; /* 0x0C */ + U8 PhysicalPort; /* 0x0D */ + U8 Reserved6; /* 0x0E */ + U8 Flags; /* 0x0F */ +} MPI2_TOOLBOX_BEACON_REQUEST, MPI2_POINTER PTR_MPI2_TOOLBOX_BEACON_REQUEST, + Mpi2ToolboxBeaconRequest_t, MPI2_POINTER pMpi2ToolboxBeaconRequest_t; + +/* values for the Flags field */ +#define MPI2_TOOLBOX_FLAGS_BEACONMODE_OFF (0x00) +#define MPI2_TOOLBOX_FLAGS_BEACONMODE_ON (0x01) + + +/***************************************************************************** +* +* Diagnostic Buffer Messages +* +*****************************************************************************/ + + +/**************************************************************************** +* Diagnostic Buffer Post request +****************************************************************************/ + +typedef struct _MPI2_DIAG_BUFFER_POST_REQUEST +{ + U8 Reserved1; /* 0x00 */ + U8 BufferType; /* 0x01 */ + U8 ChainOffset; /* 0x02 */ + U8 Function; /* 0x03 */ + U16 Reserved2; /* 0x04 */ + U8 Reserved3; /* 0x06 */ + U8 MsgFlags; /* 0x07 */ + U8 VP_ID; /* 0x08 */ + U8 VF_ID; /* 0x09 */ + U16 Reserved4; /* 0x0A */ + U64 BufferAddress; /* 0x0C */ + U32 BufferLength; /* 0x14 */ + U32 Reserved5; /* 0x18 */ + U32 Reserved6; /* 0x1C */ + U32 Flags; /* 0x20 */ + U32 ProductSpecific[23]; /* 0x24 */ +} MPI2_DIAG_BUFFER_POST_REQUEST, MPI2_POINTER PTR_MPI2_DIAG_BUFFER_POST_REQUEST, + Mpi2DiagBufferPostRequest_t, MPI2_POINTER pMpi2DiagBufferPostRequest_t; + +/* values for the BufferType field */ +#define MPI2_DIAG_BUF_TYPE_TRACE (0x00) +#define MPI2_DIAG_BUF_TYPE_SNAPSHOT (0x01) +/* count of the number of buffer types */ +#define MPI2_DIAG_BUF_TYPE_COUNT (0x02) + + +/**************************************************************************** +* Diagnostic Buffer Post reply +****************************************************************************/ + +typedef struct _MPI2_DIAG_BUFFER_POST_REPLY +{ + U8 Reserved1; /* 0x00 */ + U8 BufferType; /* 0x01 */ + U8 MsgLength; /* 0x02 */ + U8 Function; /* 0x03 */ + U16 Reserved2; /* 0x04 */ + U8 Reserved3; /* 0x06 */ + U8 MsgFlags; /* 0x07 */ + U8 VP_ID; /* 0x08 */ + U8 VF_ID; /* 0x09 */ + U16 Reserved4; /* 0x0A */ + U16 Reserved5; /* 0x0C */ + U16 IOCStatus; /* 0x0E */ + U32 IOCLogInfo; /* 0x10 */ + U32 TransferLength; /* 0x14 */ +} MPI2_DIAG_BUFFER_POST_REPLY, MPI2_POINTER PTR_MPI2_DIAG_BUFFER_POST_REPLY, + Mpi2DiagBufferPostReply_t, MPI2_POINTER pMpi2DiagBufferPostReply_t; + + +/**************************************************************************** +* Diagnostic Release request +****************************************************************************/ + +typedef struct _MPI2_DIAG_RELEASE_REQUEST +{ + U8 Reserved1; /* 0x00 */ + U8 BufferType; /* 0x01 */ + U8 ChainOffset; /* 0x02 */ + U8 Function; /* 0x03 */ + U16 Reserved2; /* 0x04 */ + U8 Reserved3; /* 0x06 */ + U8 MsgFlags; /* 0x07 */ + U8 VP_ID; /* 0x08 */ + U8 VF_ID; /* 0x09 */ + U16 Reserved4; /* 0x0A */ +} MPI2_DIAG_RELEASE_REQUEST, MPI2_POINTER PTR_MPI2_DIAG_RELEASE_REQUEST, + Mpi2DiagReleaseRequest_t, MPI2_POINTER pMpi2DiagReleaseRequest_t; + + +/**************************************************************************** +* Diagnostic Buffer Post reply +****************************************************************************/ + +typedef struct _MPI2_DIAG_RELEASE_REPLY +{ + U8 Reserved1; /* 0x00 */ + U8 BufferType; /* 0x01 */ + U8 MsgLength; /* 0x02 */ + U8 Function; /* 0x03 */ + U16 Reserved2; /* 0x04 */ + U8 Reserved3; /* 0x06 */ + U8 MsgFlags; /* 0x07 */ + U8 VP_ID; /* 0x08 */ + U8 VF_ID; /* 0x09 */ + U16 Reserved4; /* 0x0A */ + U16 Reserved5; /* 0x0C */ + U16 IOCStatus; /* 0x0E */ + U32 IOCLogInfo; /* 0x10 */ +} MPI2_DIAG_RELEASE_REPLY, MPI2_POINTER PTR_MPI2_DIAG_RELEASE_REPLY, + Mpi2DiagReleaseReply_t, MPI2_POINTER pMpi2DiagReleaseReply_t; + + +#endif + diff --git a/drivers/scsi/mpt2sas/mpi/mpi2_type.h b/drivers/scsi/mpt2sas/mpi/mpi2_type.h new file mode 100644 index 0000000..cfde017 --- /dev/null +++ b/drivers/scsi/mpt2sas/mpi/mpi2_type.h @@ -0,0 +1,61 @@ +/* + * Copyright (c) 2000-2007 LSI Corporation. + * + * + * Name: mpi2_type.h + * Title: MPI basic type definitions + * Creation Date: August 16, 2006 + * + * mpi2_type.h Version: 02.00.00 + * + * Version History + * --------------- + * + * Date Version Description + * -------- -------- ------------------------------------------------------ + * 04-30-07 02.00.00 Corresponds to Fusion-MPT MPI Specification Rev A. + * -------------------------------------------------------------------------- + */ + +#ifndef MPI2_TYPE_H +#define MPI2_TYPE_H + + +/******************************************************************************* + * Define MPI2_POINTER if it hasn't already been defined. By default + * MPI2_POINTER is defined to be a near pointer. MPI2_POINTER can be defined as + * a far pointer by defining MPI2_POINTER as "far *" before this header file is + * included. + */ +#ifndef MPI2_POINTER +#define MPI2_POINTER * +#endif + +/* the basic types may have already been included by mpi_type.h */ +#ifndef MPI_TYPE_H +/***************************************************************************** +* +* Basic Types +* +*****************************************************************************/ + +typedef u8 U8; +typedef __le16 U16; +typedef __le32 U32; +typedef __le64 U64 __attribute__((aligned(4))); + +/***************************************************************************** +* +* Pointer Types +* +*****************************************************************************/ + +typedef U8 *PU8; +typedef U16 *PU16; +typedef U32 *PU32; +typedef U64 *PU64; + +#endif + +#endif + diff --git a/drivers/scsi/mpt2sas/mpt2sas_base.c b/drivers/scsi/mpt2sas/mpt2sas_base.c new file mode 100644 index 0000000..52427a8 --- /dev/null +++ b/drivers/scsi/mpt2sas/mpt2sas_base.c @@ -0,0 +1,3435 @@ +/* + * This is the Fusion MPT base driver providing common API layer interface + * for access to MPT (Message Passing Technology) firmware. + * + * This code is based on drivers/scsi/mpt2sas/mpt2_base.c + * Copyright (C) 2007-2008 LSI Corporation + * (mailto:DL-MPTFusionLinux@lsi.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * NO WARRANTY + * THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR + * CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT + * LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT, + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is + * solely responsible for determining the appropriateness of using and + * distributing the Program and assumes all risks associated with its + * exercise of rights under this Agreement, including but not limited to + * the risks and costs of program errors, damage to or loss of data, + * programs or equipment, and unavailability or interruption of operations. + + * DISCLAIMER OF LIABILITY + * NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR + * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE + * USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED + * HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES + + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, + * USA. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "mpt2sas_base.h" + +static MPT_CALLBACK mpt_callbacks[MPT_MAX_CALLBACKS]; + +#define FAULT_POLLING_INTERVAL 1000 /* in milliseconds */ +#define MPT2SAS_MAX_REQUEST_QUEUE 500 /* maximum controller queue depth */ + +static int max_queue_depth = -1; +module_param(max_queue_depth, int, 0); +MODULE_PARM_DESC(max_queue_depth, " max controller queue depth "); + +static int max_sgl_entries = -1; +module_param(max_sgl_entries, int, 0); +MODULE_PARM_DESC(max_sgl_entries, " max sg entries "); + +static int msix_disable = -1; +module_param(msix_disable, int, 0); +MODULE_PARM_DESC(msix_disable, " disable msix routed interrupts (default=0)"); + +/** + * _base_fault_reset_work - workq handling ioc fault conditions + * @work: input argument, used to derive ioc + * Context: sleep. + * + * Return nothing. + */ +static void +_base_fault_reset_work(struct work_struct *work) +{ + struct MPT2SAS_ADAPTER *ioc = + container_of(work, struct MPT2SAS_ADAPTER, fault_reset_work.work); + unsigned long flags; + u32 doorbell; + int rc; + + spin_lock_irqsave(&ioc->ioc_reset_in_progress_lock, flags); + if (ioc->ioc_reset_in_progress) + goto rearm_timer; + spin_unlock_irqrestore(&ioc->ioc_reset_in_progress_lock, flags); + + doorbell = mpt2sas_base_get_iocstate(ioc, 0); + if ((doorbell & MPI2_IOC_STATE_MASK) == MPI2_IOC_STATE_FAULT) { + rc = mpt2sas_base_hard_reset_handler(ioc, CAN_SLEEP, + FORCE_BIG_HAMMER); + printk(MPT2SAS_WARN_FMT "%s: hard reset: %s\n", ioc->name, + __func__, (rc == 0) ? "success" : "failed"); + doorbell = mpt2sas_base_get_iocstate(ioc, 0); + if ((doorbell & MPI2_IOC_STATE_MASK) == MPI2_IOC_STATE_FAULT) + mpt2sas_base_fault_info(ioc, doorbell & + MPI2_DOORBELL_DATA_MASK); + } + + spin_lock_irqsave(&ioc->ioc_reset_in_progress_lock, flags); + rearm_timer: + if (ioc->fault_reset_work_q) + queue_delayed_work(ioc->fault_reset_work_q, + &ioc->fault_reset_work, + msecs_to_jiffies(FAULT_POLLING_INTERVAL)); + spin_unlock_irqrestore(&ioc->ioc_reset_in_progress_lock, flags); +} + +#ifdef CONFIG_SCSI_MPT2SAS_LOGGING +/** + * _base_sas_ioc_info - verbose translation of the ioc status + * @ioc: pointer to scsi command object + * @mpi_reply: reply mf payload returned from firmware + * @request_hdr: request mf + * + * Return nothing. + */ +static void +_base_sas_ioc_info(struct MPT2SAS_ADAPTER *ioc, MPI2DefaultReply_t *mpi_reply, + MPI2RequestHeader_t *request_hdr) +{ + u16 ioc_status = le16_to_cpu(mpi_reply->IOCStatus) & + MPI2_IOCSTATUS_MASK; + char *desc = NULL; + u16 frame_sz; + char *func_str = NULL; + + /* SCSI_IO, RAID_PASS are handled from _scsih_scsi_ioc_info */ + if (request_hdr->Function == MPI2_FUNCTION_SCSI_IO_REQUEST || + request_hdr->Function == MPI2_FUNCTION_RAID_SCSI_IO_PASSTHROUGH || + request_hdr->Function == MPI2_FUNCTION_EVENT_NOTIFICATION) + return; + + switch (ioc_status) { + +/**************************************************************************** +* Common IOCStatus values for all replies +****************************************************************************/ + + case MPI2_IOCSTATUS_INVALID_FUNCTION: + desc = "invalid function"; + break; + case MPI2_IOCSTATUS_BUSY: + desc = "busy"; + break; + case MPI2_IOCSTATUS_INVALID_SGL: + desc = "invalid sgl"; + break; + case MPI2_IOCSTATUS_INTERNAL_ERROR: + desc = "internal error"; + break; + case MPI2_IOCSTATUS_INVALID_VPID: + desc = "invalid vpid"; + break; + case MPI2_IOCSTATUS_INSUFFICIENT_RESOURCES: + desc = "insufficient resources"; + break; + case MPI2_IOCSTATUS_INVALID_FIELD: + desc = "invalid field"; + break; + case MPI2_IOCSTATUS_INVALID_STATE: + desc = "invalid state"; + break; + case MPI2_IOCSTATUS_OP_STATE_NOT_SUPPORTED: + desc = "op state not supported"; + break; + +/**************************************************************************** +* Config IOCStatus values +****************************************************************************/ + + case MPI2_IOCSTATUS_CONFIG_INVALID_ACTION: + desc = "config invalid action"; + break; + case MPI2_IOCSTATUS_CONFIG_INVALID_TYPE: + desc = "config invalid type"; + break; + case MPI2_IOCSTATUS_CONFIG_INVALID_PAGE: + desc = "config invalid page"; + break; + case MPI2_IOCSTATUS_CONFIG_INVALID_DATA: + desc = "config invalid data"; + break; + case MPI2_IOCSTATUS_CONFIG_NO_DEFAULTS: + desc = "config no defaults"; + break; + case MPI2_IOCSTATUS_CONFIG_CANT_COMMIT: + desc = "config cant commit"; + break; + +/**************************************************************************** +* SCSI IO Reply +****************************************************************************/ + + case MPI2_IOCSTATUS_SCSI_RECOVERED_ERROR: + case MPI2_IOCSTATUS_SCSI_INVALID_DEVHANDLE: + case MPI2_IOCSTATUS_SCSI_DEVICE_NOT_THERE: + case MPI2_IOCSTATUS_SCSI_DATA_OVERRUN: + case MPI2_IOCSTATUS_SCSI_DATA_UNDERRUN: + case MPI2_IOCSTATUS_SCSI_IO_DATA_ERROR: + case MPI2_IOCSTATUS_SCSI_PROTOCOL_ERROR: + case MPI2_IOCSTATUS_SCSI_TASK_TERMINATED: + case MPI2_IOCSTATUS_SCSI_RESIDUAL_MISMATCH: + case MPI2_IOCSTATUS_SCSI_TASK_MGMT_FAILED: + case MPI2_IOCSTATUS_SCSI_IOC_TERMINATED: + case MPI2_IOCSTATUS_SCSI_EXT_TERMINATED: + break; + +/**************************************************************************** +* For use by SCSI Initiator and SCSI Target end-to-end data protection +****************************************************************************/ + + case MPI2_IOCSTATUS_EEDP_GUARD_ERROR: + desc = "eedp guard error"; + break; + case MPI2_IOCSTATUS_EEDP_REF_TAG_ERROR: + desc = "eedp ref tag error"; + break; + case MPI2_IOCSTATUS_EEDP_APP_TAG_ERROR: + desc = "eedp app tag error"; + break; + +/**************************************************************************** +* SCSI Target values +****************************************************************************/ + + case MPI2_IOCSTATUS_TARGET_INVALID_IO_INDEX: + desc = "target invalid io index"; + break; + case MPI2_IOCSTATUS_TARGET_ABORTED: + desc = "target aborted"; + break; + case MPI2_IOCSTATUS_TARGET_NO_CONN_RETRYABLE: + desc = "target no conn retryable"; + break; + case MPI2_IOCSTATUS_TARGET_NO_CONNECTION: + desc = "target no connection"; + break; + case MPI2_IOCSTATUS_TARGET_XFER_COUNT_MISMATCH: + desc = "target xfer count mismatch"; + break; + case MPI2_IOCSTATUS_TARGET_DATA_OFFSET_ERROR: + desc = "target data offset error"; + break; + case MPI2_IOCSTATUS_TARGET_TOO_MUCH_WRITE_DATA: + desc = "target too much write data"; + break; + case MPI2_IOCSTATUS_TARGET_IU_TOO_SHORT: + desc = "target iu too short"; + break; + case MPI2_IOCSTATUS_TARGET_ACK_NAK_TIMEOUT: + desc = "target ack nak timeout"; + break; + case MPI2_IOCSTATUS_TARGET_NAK_RECEIVED: + desc = "target nak received"; + break; + +/**************************************************************************** +* Serial Attached SCSI values +****************************************************************************/ + + case MPI2_IOCSTATUS_SAS_SMP_REQUEST_FAILED: + desc = "smp request failed"; + break; + case MPI2_IOCSTATUS_SAS_SMP_DATA_OVERRUN: + desc = "smp data overrun"; + break; + +/**************************************************************************** +* Diagnostic Buffer Post / Diagnostic Release values +****************************************************************************/ + + case MPI2_IOCSTATUS_DIAGNOSTIC_RELEASED: + desc = "diagnostic released"; + break; + default: + break; + } + + if (!desc) + return; + + switch (request_hdr->Function) { + case MPI2_FUNCTION_CONFIG: + frame_sz = sizeof(Mpi2ConfigRequest_t) + ioc->sge_size; + func_str = "config_page"; + break; + case MPI2_FUNCTION_SCSI_TASK_MGMT: + frame_sz = sizeof(Mpi2SCSITaskManagementRequest_t); + func_str = "task_mgmt"; + break; + case MPI2_FUNCTION_SAS_IO_UNIT_CONTROL: + frame_sz = sizeof(Mpi2SasIoUnitControlRequest_t); + func_str = "sas_iounit_ctl"; + break; + case MPI2_FUNCTION_SCSI_ENCLOSURE_PROCESSOR: + frame_sz = sizeof(Mpi2SepRequest_t); + func_str = "enclosure"; + break; + case MPI2_FUNCTION_IOC_INIT: + frame_sz = sizeof(Mpi2IOCInitRequest_t); + func_str = "ioc_init"; + break; + case MPI2_FUNCTION_PORT_ENABLE: + frame_sz = sizeof(Mpi2PortEnableRequest_t); + func_str = "port_enable"; + break; + case MPI2_FUNCTION_SMP_PASSTHROUGH: + frame_sz = sizeof(Mpi2SmpPassthroughRequest_t) + ioc->sge_size; + func_str = "smp_passthru"; + break; + default: + frame_sz = 32; + func_str = "unknown"; + break; + } + + printk(MPT2SAS_WARN_FMT "ioc_status: %s(0x%04x), request(0x%p)," + " (%s)\n", ioc->name, desc, ioc_status, request_hdr, func_str); + + _debug_dump_mf(request_hdr, frame_sz/4); +} + +/** + * _base_display_event_data - verbose translation of firmware asyn events + * @ioc: pointer to scsi command object + * @mpi_reply: reply mf payload returned from firmware + * + * Return nothing. + */ +static void +_base_display_event_data(struct MPT2SAS_ADAPTER *ioc, + Mpi2EventNotificationReply_t *mpi_reply) +{ + char *desc = NULL; + u16 event; + + if (!(ioc->logging_level & MPT_DEBUG_EVENTS)) + return; + + event = le16_to_cpu(mpi_reply->Event); + + switch (event) { + case MPI2_EVENT_LOG_DATA: + desc = "Log Data"; + break; + case MPI2_EVENT_STATE_CHANGE: + desc = "Status Change"; + break; + case MPI2_EVENT_HARD_RESET_RECEIVED: + desc = "Hard Reset Received"; + break; + case MPI2_EVENT_EVENT_CHANGE: + desc = "Event Change"; + break; + case MPI2_EVENT_TASK_SET_FULL: + desc = "Task Set Full"; + break; + case MPI2_EVENT_SAS_DEVICE_STATUS_CHANGE: + desc = "Device Status Change"; + break; + case MPI2_EVENT_IR_OPERATION_STATUS: + desc = "IR Operation Status"; + break; + case MPI2_EVENT_SAS_DISCOVERY: + desc = "Discovery"; + break; + case MPI2_EVENT_SAS_BROADCAST_PRIMITIVE: + desc = "SAS Broadcast Primitive"; + break; + case MPI2_EVENT_SAS_INIT_DEVICE_STATUS_CHANGE: + desc = "SAS Init Device Status Change"; + break; + case MPI2_EVENT_SAS_INIT_TABLE_OVERFLOW: + desc = "SAS Init Table Overflow"; + break; + case MPI2_EVENT_SAS_TOPOLOGY_CHANGE_LIST: + desc = "SAS Topology Change List"; + break; + case MPI2_EVENT_SAS_ENCL_DEVICE_STATUS_CHANGE: + desc = "SAS Enclosure Device Status Change"; + break; + case MPI2_EVENT_IR_VOLUME: + desc = "IR Volume"; + break; + case MPI2_EVENT_IR_PHYSICAL_DISK: + desc = "IR Physical Disk"; + break; + case MPI2_EVENT_IR_CONFIGURATION_CHANGE_LIST: + desc = "IR Configuration Change List"; + break; + case MPI2_EVENT_LOG_ENTRY_ADDED: + desc = "Log Entry Added"; + break; + } + + if (!desc) + return; + + printk(MPT2SAS_INFO_FMT "%s\n", ioc->name, desc); +} +#endif + +/** + * _base_sas_log_info - verbose translation of firmware log info + * @ioc: pointer to scsi command object + * @log_info: log info + * + * Return nothing. + */ +static void +_base_sas_log_info(struct MPT2SAS_ADAPTER *ioc , u32 log_info) +{ + union loginfo_type { + u32 loginfo; + struct { + u32 subcode:16; + u32 code:8; + u32 originator:4; + u32 bus_type:4; + } dw; + }; + union loginfo_type sas_loginfo; + char *originator_str = NULL; + + sas_loginfo.loginfo = log_info; + if (sas_loginfo.dw.bus_type != 3 /*SAS*/) + return; + + /* eat the loginfos associated with task aborts */ + if (ioc->ignore_loginfos && (log_info == 30050000 || log_info == + 0x31140000 || log_info == 0x31130000)) + return; + + switch (sas_loginfo.dw.originator) { + case 0: + originator_str = "IOP"; + break; + case 1: + originator_str = "PL"; + break; + case 2: + originator_str = "IR"; + break; + } + + printk(MPT2SAS_WARN_FMT "log_info(0x%08x): originator(%s), " + "code(0x%02x), sub_code(0x%04x)\n", ioc->name, log_info, + originator_str, sas_loginfo.dw.code, + sas_loginfo.dw.subcode); +} + +/** + * mpt2sas_base_fault_info - verbose translation of firmware FAULT code + * @ioc: pointer to scsi command object + * @fault_code: fault code + * + * Return nothing. + */ +void +mpt2sas_base_fault_info(struct MPT2SAS_ADAPTER *ioc , u16 fault_code) +{ + printk(MPT2SAS_ERR_FMT "fault_state(0x%04x)!\n", + ioc->name, fault_code); +} + +/** + * _base_display_reply_info - + * @ioc: pointer to scsi command object + * @smid: system request message index + * @VF_ID: virtual function id + * @reply: reply message frame(lower 32bit addr) + * + * Return nothing. + */ +static void +_base_display_reply_info(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 VF_ID, + u32 reply) +{ + MPI2DefaultReply_t *mpi_reply; + u16 ioc_status; + + mpi_reply = mpt2sas_base_get_reply_virt_addr(ioc, reply); + ioc_status = le16_to_cpu(mpi_reply->IOCStatus); +#ifdef CONFIG_SCSI_MPT2SAS_LOGGING + if ((ioc_status & MPI2_IOCSTATUS_MASK) && + (ioc->logging_level & MPT_DEBUG_REPLY)) { + _base_sas_ioc_info(ioc , mpi_reply, + mpt2sas_base_get_msg_frame(ioc, smid)); + } +#endif + if (ioc_status & MPI2_IOCSTATUS_FLAG_LOG_INFO_AVAILABLE) + _base_sas_log_info(ioc, le32_to_cpu(mpi_reply->IOCLogInfo)); +} + +/** + * mpt2sas_base_done - base internal command completion routine + * @ioc: pointer to scsi command object + * @smid: system request message index + * @VF_ID: virtual function id + * @reply: reply message frame(lower 32bit addr) + * + * Return nothing. + */ +void +mpt2sas_base_done(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 VF_ID, u32 reply) +{ + MPI2DefaultReply_t *mpi_reply; + + mpi_reply = mpt2sas_base_get_reply_virt_addr(ioc, reply); + if (mpi_reply && mpi_reply->Function == MPI2_FUNCTION_EVENT_ACK) + return; + + if (ioc->base_cmds.status == MPT2_CMD_NOT_USED) + return; + + ioc->base_cmds.status |= MPT2_CMD_COMPLETE; + if (mpi_reply) { + ioc->base_cmds.status |= MPT2_CMD_REPLY_VALID; + memcpy(ioc->base_cmds.reply, mpi_reply, mpi_reply->MsgLength*4); + } + ioc->base_cmds.status &= ~MPT2_CMD_PENDING; + complete(&ioc->base_cmds.done); +} + +/** + * _base_async_event - main callback handler for firmware asyn events + * @ioc: pointer to scsi command object + * @VF_ID: virtual function id + * @reply: reply message frame(lower 32bit addr) + * + * Return nothing. + */ +static void +_base_async_event(struct MPT2SAS_ADAPTER *ioc, u8 VF_ID, u32 reply) +{ + Mpi2EventNotificationReply_t *mpi_reply; + Mpi2EventAckRequest_t *ack_request; + u16 smid; + + mpi_reply = mpt2sas_base_get_reply_virt_addr(ioc, reply); + if (!mpi_reply) + return; + if (mpi_reply->Function != MPI2_FUNCTION_EVENT_NOTIFICATION) + return; +#ifdef CONFIG_SCSI_MPT2SAS_LOGGING + _base_display_event_data(ioc, mpi_reply); +#endif + if (!(mpi_reply->AckRequired & MPI2_EVENT_NOTIFICATION_ACK_REQUIRED)) + goto out; + smid = mpt2sas_base_get_smid(ioc, ioc->base_cb_idx); + if (!smid) { + printk(MPT2SAS_ERR_FMT "%s: failed obtaining a smid\n", + ioc->name, __func__); + goto out; + } + + ack_request = mpt2sas_base_get_msg_frame(ioc, smid); + memset(ack_request, 0, sizeof(Mpi2EventAckRequest_t)); + ack_request->Function = MPI2_FUNCTION_EVENT_ACK; + ack_request->Event = mpi_reply->Event; + ack_request->EventContext = mpi_reply->EventContext; + ack_request->VF_ID = VF_ID; + mpt2sas_base_put_smid_default(ioc, smid, VF_ID); + + out: + + /* scsih callback handler */ + mpt2sas_scsih_event_callback(ioc, VF_ID, reply); + + /* ctl callback handler */ + mpt2sas_ctl_event_callback(ioc, VF_ID, reply); +} + +/** + * _base_mask_interrupts - disable interrupts + * @ioc: pointer to scsi command object + * + * Disabling ResetIRQ, Reply and Doorbell Interrupts + * + * Return nothing. + */ +static void +_base_mask_interrupts(struct MPT2SAS_ADAPTER *ioc) +{ + u32 him_register; + + ioc->mask_interrupts = 1; + him_register = readl(&ioc->chip->HostInterruptMask); + him_register |= MPI2_HIM_DIM + MPI2_HIM_RIM + MPI2_HIM_RESET_IRQ_MASK; + writel(him_register, &ioc->chip->HostInterruptMask); + readl(&ioc->chip->HostInterruptMask); +} + +/** + * _base_unmask_interrupts - enable interrupts + * @ioc: pointer to scsi command object + * + * Enabling only Reply Interrupts + * + * Return nothing. + */ +static void +_base_unmask_interrupts(struct MPT2SAS_ADAPTER *ioc) +{ + u32 him_register; + + writel(0, &ioc->chip->HostInterruptStatus); + him_register = readl(&ioc->chip->HostInterruptMask); + him_register &= ~MPI2_HIM_RIM; + writel(him_register, &ioc->chip->HostInterruptMask); + ioc->mask_interrupts = 0; +} + +/** + * _base_interrupt - MPT adapter (IOC) specific interrupt handler. + * @irq: irq number (not used) + * @bus_id: bus identifier cookie == pointer to MPT_ADAPTER structure + * @r: pt_regs pointer (not used) + * + * Return IRQ_HANDLE if processed, else IRQ_NONE. + */ +static irqreturn_t +_base_interrupt(int irq, void *bus_id) +{ + u32 post_index, post_index_next, completed_cmds; + u8 request_desript_type; + u16 smid; + u8 cb_idx; + u32 reply; + u8 VF_ID; + int i; + struct MPT2SAS_ADAPTER *ioc = bus_id; + + if (ioc->mask_interrupts) + return IRQ_NONE; + + post_index = ioc->reply_post_host_index; + request_desript_type = ioc->reply_post_free[post_index]. + Default.ReplyFlags & MPI2_RPY_DESCRIPT_FLAGS_TYPE_MASK; + if (request_desript_type == MPI2_RPY_DESCRIPT_FLAGS_UNUSED) + return IRQ_NONE; + + completed_cmds = 0; + do { + if (ioc->reply_post_free[post_index].Words == ~0ULL) + goto out; + reply = 0; + cb_idx = 0xFF; + smid = le16_to_cpu(ioc->reply_post_free[post_index]. + Default.DescriptorTypeDependent1); + VF_ID = ioc->reply_post_free[post_index]. + Default.VF_ID; + if (request_desript_type == + MPI2_RPY_DESCRIPT_FLAGS_ADDRESS_REPLY) { + reply = le32_to_cpu(ioc->reply_post_free[post_index]. + AddressReply.ReplyFrameAddress); + } else if (request_desript_type == + MPI2_RPY_DESCRIPT_FLAGS_TARGET_COMMAND_BUFFER) + goto next; + else if (request_desript_type == + MPI2_RPY_DESCRIPT_FLAGS_TARGETASSIST_SUCCESS) + goto next; + if (smid) + cb_idx = ioc->scsi_lookup[smid - 1].cb_idx; + if (smid && cb_idx != 0xFF) { + mpt_callbacks[cb_idx](ioc, smid, VF_ID, reply); + if (reply) + _base_display_reply_info(ioc, smid, VF_ID, + reply); + mpt2sas_base_free_smid(ioc, smid); + } + if (!smid) + _base_async_event(ioc, VF_ID, reply); + + /* reply free queue handling */ + if (reply) { + ioc->reply_free_host_index = + (ioc->reply_free_host_index == + (ioc->reply_free_queue_depth - 1)) ? + 0 : ioc->reply_free_host_index + 1; + ioc->reply_free[ioc->reply_free_host_index] = + cpu_to_le32(reply); + writel(ioc->reply_free_host_index, + &ioc->chip->ReplyFreeHostIndex); + wmb(); + } + + next: + post_index_next = (post_index == (ioc->reply_post_queue_depth - + 1)) ? 0 : post_index + 1; + request_desript_type = + ioc->reply_post_free[post_index_next].Default.ReplyFlags + & MPI2_RPY_DESCRIPT_FLAGS_TYPE_MASK; + completed_cmds++; + if (request_desript_type == MPI2_RPY_DESCRIPT_FLAGS_UNUSED) + goto out; + post_index = post_index_next; + } while (1); + + out: + + if (!completed_cmds) + return IRQ_NONE; + + /* reply post descriptor handling */ + post_index_next = ioc->reply_post_host_index; + for (i = 0 ; i < completed_cmds; i++) { + post_index = post_index_next; + /* poison the reply post descriptor */ + ioc->reply_post_free[post_index_next].Words = ~0ULL; + post_index_next = (post_index == + (ioc->reply_post_queue_depth - 1)) + ? 0 : post_index + 1; + } + ioc->reply_post_host_index = post_index_next; + writel(post_index_next, &ioc->chip->ReplyPostHostIndex); + wmb(); + return IRQ_HANDLED; +} + +/** + * mpt2sas_base_release_callback_handler - clear interupt callback handler + * @cb_idx: callback index + * + * Return nothing. + */ +void +mpt2sas_base_release_callback_handler(u8 cb_idx) +{ + mpt_callbacks[cb_idx] = NULL; +} + +/** + * mpt2sas_base_register_callback_handler - obtain index for the interrupt callback handler + * @cb_func: callback function + * + * Returns cb_func. + */ +u8 +mpt2sas_base_register_callback_handler(MPT_CALLBACK cb_func) +{ + u8 cb_idx; + + for (cb_idx = MPT_MAX_CALLBACKS-1; cb_idx; cb_idx--) + if (mpt_callbacks[cb_idx] == NULL) + break; + + mpt_callbacks[cb_idx] = cb_func; + return cb_idx; +} + +/** + * mpt2sas_base_initialize_callback_handler - initialize the interrupt callback handler + * + * Return nothing. + */ +void +mpt2sas_base_initialize_callback_handler(void) +{ + u8 cb_idx; + + for (cb_idx = 0; cb_idx < MPT_MAX_CALLBACKS; cb_idx++) + mpt2sas_base_release_callback_handler(cb_idx); +} + +/** + * mpt2sas_base_build_zero_len_sge - build zero length sg entry + * @ioc: per adapter object + * @paddr: virtual address for SGE + * + * Create a zero length scatter gather entry to insure the IOCs hardware has + * something to use if the target device goes brain dead and tries + * to send data even when none is asked for. + * + * Return nothing. + */ +void +mpt2sas_base_build_zero_len_sge(struct MPT2SAS_ADAPTER *ioc, void *paddr) +{ + u32 flags_length = (u32)((MPI2_SGE_FLAGS_LAST_ELEMENT | + MPI2_SGE_FLAGS_END_OF_BUFFER | MPI2_SGE_FLAGS_END_OF_LIST | + MPI2_SGE_FLAGS_SIMPLE_ELEMENT) << + MPI2_SGE_FLAGS_SHIFT); + ioc->base_add_sg_single(paddr, flags_length, -1); +} + +/** + * _base_add_sg_single_32 - Place a simple 32 bit SGE at address pAddr. + * @paddr: virtual address for SGE + * @flags_length: SGE flags and data transfer length + * @dma_addr: Physical address + * + * Return nothing. + */ +static void +_base_add_sg_single_32(void *paddr, u32 flags_length, dma_addr_t dma_addr) +{ + Mpi2SGESimple32_t *sgel = paddr; + + flags_length |= (MPI2_SGE_FLAGS_32_BIT_ADDRESSING | + MPI2_SGE_FLAGS_SYSTEM_ADDRESS) << MPI2_SGE_FLAGS_SHIFT; + sgel->FlagsLength = cpu_to_le32(flags_length); + sgel->Address = cpu_to_le32(dma_addr); +} + + +/** + * _base_add_sg_single_64 - Place a simple 64 bit SGE at address pAddr. + * @paddr: virtual address for SGE + * @flags_length: SGE flags and data transfer length + * @dma_addr: Physical address + * + * Return nothing. + */ +static void +_base_add_sg_single_64(void *paddr, u32 flags_length, dma_addr_t dma_addr) +{ + Mpi2SGESimple64_t *sgel = paddr; + + flags_length |= (MPI2_SGE_FLAGS_64_BIT_ADDRESSING | + MPI2_SGE_FLAGS_SYSTEM_ADDRESS) << MPI2_SGE_FLAGS_SHIFT; + sgel->FlagsLength = cpu_to_le32(flags_length); + sgel->Address = cpu_to_le64(dma_addr); +} + +#define convert_to_kb(x) ((x) << (PAGE_SHIFT - 10)) + +/** + * _base_config_dma_addressing - set dma addressing + * @ioc: per adapter object + * @pdev: PCI device struct + * + * Returns 0 for success, non-zero for failure. + */ +static int +_base_config_dma_addressing(struct MPT2SAS_ADAPTER *ioc, struct pci_dev *pdev) +{ + struct sysinfo s; + char *desc = NULL; + + if (sizeof(dma_addr_t) > 4) { + const uint64_t required_mask = + dma_get_required_mask(&pdev->dev); + if ((required_mask > DMA_32BIT_MASK) && !pci_set_dma_mask(pdev, + DMA_64BIT_MASK) && !pci_set_consistent_dma_mask(pdev, + DMA_64BIT_MASK)) { + ioc->base_add_sg_single = &_base_add_sg_single_64; + ioc->sge_size = sizeof(Mpi2SGESimple64_t); + desc = "64"; + goto out; + } + } + + if (!pci_set_dma_mask(pdev, DMA_32BIT_MASK) + && !pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK)) { + ioc->base_add_sg_single = &_base_add_sg_single_32; + ioc->sge_size = sizeof(Mpi2SGESimple32_t); + desc = "32"; + } else + return -ENODEV; + + out: + si_meminfo(&s); + printk(MPT2SAS_INFO_FMT "%s BIT PCI BUS DMA ADDRESSING SUPPORTED, " + "total mem (%ld kB)\n", ioc->name, desc, convert_to_kb(s.totalram)); + + return 0; +} + +/** + * _base_save_msix_table - backup msix vector table + * @ioc: per adapter object + * + * This address an errata where diag reset clears out the table + */ +static void +_base_save_msix_table(struct MPT2SAS_ADAPTER *ioc) +{ + int i; + + if (!ioc->msix_enable || ioc->msix_table_backup == NULL) + return; + + for (i = 0; i < ioc->msix_vector_count; i++) + ioc->msix_table_backup[i] = ioc->msix_table[i]; +} + +/** + * _base_restore_msix_table - this restores the msix vector table + * @ioc: per adapter object + * + */ +static void +_base_restore_msix_table(struct MPT2SAS_ADAPTER *ioc) +{ + int i; + + if (!ioc->msix_enable || ioc->msix_table_backup == NULL) + return; + + for (i = 0; i < ioc->msix_vector_count; i++) + ioc->msix_table[i] = ioc->msix_table_backup[i]; +} + +/** + * _base_check_enable_msix - checks MSIX capabable. + * @ioc: per adapter object + * + * Check to see if card is capable of MSIX, and set number + * of avaliable msix vectors + */ +static int +_base_check_enable_msix(struct MPT2SAS_ADAPTER *ioc) +{ + int base; + u16 message_control; + u32 msix_table_offset; + + base = pci_find_capability(ioc->pdev, PCI_CAP_ID_MSIX); + if (!base) { + dfailprintk(ioc, printk(MPT2SAS_INFO_FMT "msix not " + "supported\n", ioc->name)); + return -EINVAL; + } + + /* get msix vector count */ + pci_read_config_word(ioc->pdev, base + 2, &message_control); + ioc->msix_vector_count = (message_control & 0x3FF) + 1; + + /* get msix table */ + pci_read_config_dword(ioc->pdev, base + 4, &msix_table_offset); + msix_table_offset &= 0xFFFFFFF8; + ioc->msix_table = (u32 *)((void *)ioc->chip + msix_table_offset); + + dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "msix is supported, " + "vector_count(%d), table_offset(0x%08x), table(%p)\n", ioc->name, + ioc->msix_vector_count, msix_table_offset, ioc->msix_table)); + return 0; +} + +/** + * _base_disable_msix - disables msix + * @ioc: per adapter object + * + */ +static void +_base_disable_msix(struct MPT2SAS_ADAPTER *ioc) +{ + if (ioc->msix_enable) { + pci_disable_msix(ioc->pdev); + kfree(ioc->msix_table_backup); + ioc->msix_table_backup = NULL; + ioc->msix_enable = 0; + } +} + +/** + * _base_enable_msix - enables msix, failback to io_apic + * @ioc: per adapter object + * + */ +static int +_base_enable_msix(struct MPT2SAS_ADAPTER *ioc) +{ + struct msix_entry entries; + int r; + u8 try_msix = 0; + + if (msix_disable == -1 || msix_disable == 0) + try_msix = 1; + + if (!try_msix) + goto try_ioapic; + + if (_base_check_enable_msix(ioc) != 0) + goto try_ioapic; + + ioc->msix_table_backup = kcalloc(ioc->msix_vector_count, + sizeof(u32), GFP_KERNEL); + if (!ioc->msix_table_backup) { + dfailprintk(ioc, printk(MPT2SAS_INFO_FMT "allocation for " + "msix_table_backup failed!!!\n", ioc->name)); + goto try_ioapic; + } + + memset(&entries, 0, sizeof(struct msix_entry)); + r = pci_enable_msix(ioc->pdev, &entries, 1); + if (r) { + dfailprintk(ioc, printk(MPT2SAS_INFO_FMT "pci_enable_msix " + "failed (r=%d) !!!\n", ioc->name, r)); + goto try_ioapic; + } + + r = request_irq(entries.vector, _base_interrupt, IRQF_SHARED, + ioc->name, ioc); + if (r) { + dfailprintk(ioc, printk(MPT2SAS_INFO_FMT "unable to allocate " + "interrupt %d !!!\n", ioc->name, entries.vector)); + pci_disable_msix(ioc->pdev); + goto try_ioapic; + } + + ioc->pci_irq = entries.vector; + ioc->msix_enable = 1; + return 0; + +/* failback to io_apic interrupt routing */ + try_ioapic: + + r = request_irq(ioc->pdev->irq, _base_interrupt, IRQF_SHARED, + ioc->name, ioc); + if (r) { + printk(MPT2SAS_ERR_FMT "unable to allocate interrupt %d!\n", + ioc->name, ioc->pdev->irq); + r = -EBUSY; + goto out_fail; + } + + ioc->pci_irq = ioc->pdev->irq; + return 0; + + out_fail: + return r; +} + +/** + * mpt2sas_base_map_resources - map in controller resources (io/irq/memap) + * @ioc: per adapter object + * + * Returns 0 for success, non-zero for failure. + */ +int +mpt2sas_base_map_resources(struct MPT2SAS_ADAPTER *ioc) +{ + struct pci_dev *pdev = ioc->pdev; + u32 memap_sz; + u32 pio_sz; + int i, r = 0; + + dinitprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s\n", + ioc->name, __func__)); + + ioc->bars = pci_select_bars(pdev, IORESOURCE_MEM); + if (pci_enable_device_mem(pdev)) { + printk(MPT2SAS_WARN_FMT "pci_enable_device_mem: " + "failed\n", ioc->name); + return -ENODEV; + } + + + if (pci_request_selected_regions(pdev, ioc->bars, + MPT2SAS_DRIVER_NAME)) { + printk(MPT2SAS_WARN_FMT "pci_request_selected_regions: " + "failed\n", ioc->name); + r = -ENODEV; + goto out_fail; + } + + pci_set_master(pdev); + + if (_base_config_dma_addressing(ioc, pdev) != 0) { + printk(MPT2SAS_WARN_FMT "no suitable DMA mask for %s\n", + ioc->name, pci_name(pdev)); + r = -ENODEV; + goto out_fail; + } + + for (i = 0, memap_sz = 0, pio_sz = 0 ; i < DEVICE_COUNT_RESOURCE; i++) { + if (pci_resource_flags(pdev, i) & PCI_BASE_ADDRESS_SPACE_IO) { + if (pio_sz) + continue; + ioc->pio_chip = pci_resource_start(pdev, i); + pio_sz = pci_resource_len(pdev, i); + } else { + if (memap_sz) + continue; + ioc->chip_phys = pci_resource_start(pdev, i); + memap_sz = pci_resource_len(pdev, i); + ioc->chip = ioremap(ioc->chip_phys, memap_sz); + if (ioc->chip == NULL) { + printk(MPT2SAS_ERR_FMT "unable to map adapter " + "memory!\n", ioc->name); + r = -EINVAL; + goto out_fail; + } + } + } + + pci_set_drvdata(pdev, ioc->shost); + _base_mask_interrupts(ioc); + r = _base_enable_msix(ioc); + if (r) + goto out_fail; + + printk(MPT2SAS_INFO_FMT "%s: IRQ %d\n", + ioc->name, ((ioc->msix_enable) ? "PCI-MSI-X enabled" : + "IO-APIC enabled"), ioc->pci_irq); + printk(MPT2SAS_INFO_FMT "iomem(0x%lx), mapped(0x%p), size(%d)\n", + ioc->name, ioc->chip_phys, ioc->chip, memap_sz); + printk(MPT2SAS_INFO_FMT "ioport(0x%lx), size(%d)\n", + ioc->name, ioc->pio_chip, pio_sz); + + return 0; + + out_fail: + if (ioc->chip_phys) + iounmap(ioc->chip); + ioc->chip_phys = 0; + ioc->pci_irq = -1; + pci_release_selected_regions(ioc->pdev, ioc->bars); + pci_disable_device(pdev); + pci_set_drvdata(pdev, NULL); + return r; +} + +/** + * mpt2sas_base_get_msg_frame_dma - obtain request mf pointer phys addr + * @ioc: per adapter object + * @smid: system request message index(smid zero is invalid) + * + * Returns phys pointer to message frame. + */ +dma_addr_t +mpt2sas_base_get_msg_frame_dma(struct MPT2SAS_ADAPTER *ioc, u16 smid) +{ + return ioc->request_dma + (smid * ioc->request_sz); +} + +/** + * mpt2sas_base_get_msg_frame - obtain request mf pointer + * @ioc: per adapter object + * @smid: system request message index(smid zero is invalid) + * + * Returns virt pointer to message frame. + */ +void * +mpt2sas_base_get_msg_frame(struct MPT2SAS_ADAPTER *ioc, u16 smid) +{ + return (void *)(ioc->request + (smid * ioc->request_sz)); +} + +/** + * mpt2sas_base_get_sense_buffer - obtain a sense buffer assigned to a mf request + * @ioc: per adapter object + * @smid: system request message index + * + * Returns virt pointer to sense buffer. + */ +void * +mpt2sas_base_get_sense_buffer(struct MPT2SAS_ADAPTER *ioc, u16 smid) +{ + return (void *)(ioc->sense + ((smid - 1) * SCSI_SENSE_BUFFERSIZE)); +} + +/** + * mpt2sas_base_get_sense_buffer_dma - obtain a sense buffer assigned to a mf request + * @ioc: per adapter object + * @smid: system request message index + * + * Returns phys pointer to sense buffer. + */ +dma_addr_t +mpt2sas_base_get_sense_buffer_dma(struct MPT2SAS_ADAPTER *ioc, u16 smid) +{ + return ioc->sense_dma + ((smid - 1) * SCSI_SENSE_BUFFERSIZE); +} + +/** + * mpt2sas_base_get_reply_virt_addr - obtain reply frames virt address + * @ioc: per adapter object + * @phys_addr: lower 32 physical addr of the reply + * + * Converts 32bit lower physical addr into a virt address. + */ +void * +mpt2sas_base_get_reply_virt_addr(struct MPT2SAS_ADAPTER *ioc, u32 phys_addr) +{ + if (!phys_addr) + return NULL; + return ioc->reply + (phys_addr - (u32)ioc->reply_dma); +} + +/** + * mpt2sas_base_get_smid - obtain a free smid + * @ioc: per adapter object + * @cb_idx: callback index + * + * Returns smid (zero is invalid) + */ +u16 +mpt2sas_base_get_smid(struct MPT2SAS_ADAPTER *ioc, u8 cb_idx) +{ + unsigned long flags; + struct request_tracker *request; + u16 smid; + + spin_lock_irqsave(&ioc->scsi_lookup_lock, flags); + if (list_empty(&ioc->free_list)) { + spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags); + printk(MPT2SAS_ERR_FMT "%s: smid not available\n", + ioc->name, __func__); + return 0; + } + + request = list_entry(ioc->free_list.next, + struct request_tracker, tracker_list); + request->cb_idx = cb_idx; + smid = request->smid; + list_del(&request->tracker_list); + spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags); + return smid; +} + + +/** + * mpt2sas_base_free_smid - put smid back on free_list + * @ioc: per adapter object + * @smid: system request message index + * + * Return nothing. + */ +void +mpt2sas_base_free_smid(struct MPT2SAS_ADAPTER *ioc, u16 smid) +{ + unsigned long flags; + + spin_lock_irqsave(&ioc->scsi_lookup_lock, flags); + ioc->scsi_lookup[smid - 1].cb_idx = 0xFF; + list_add_tail(&ioc->scsi_lookup[smid - 1].tracker_list, + &ioc->free_list); + spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags); + + /* + * See _wait_for_commands_to_complete() call with regards to this code. + */ + if (ioc->shost_recovery && ioc->pending_io_count) { + if (ioc->pending_io_count == 1) + wake_up(&ioc->reset_wq); + ioc->pending_io_count--; + } +} + +/** + * _base_writeq - 64 bit write to MMIO + * @ioc: per adapter object + * @b: data payload + * @addr: address in MMIO space + * @writeq_lock: spin lock + * + * Glue for handling an atomic 64 bit word to MMIO. This special handling takes + * care of 32 bit environment where its not quarenteed to send the entire word + * in one transfer. + */ +#ifndef writeq +static inline void _base_writeq(__u64 b, volatile void __iomem *addr, + spinlock_t *writeq_lock) +{ + unsigned long flags; + __u64 data_out = cpu_to_le64(b); + + spin_lock_irqsave(writeq_lock, flags); + writel((u32)(data_out), addr); + writel((u32)(data_out >> 32), (addr + 4)); + spin_unlock_irqrestore(writeq_lock, flags); +} +#else +static inline void _base_writeq(__u64 b, volatile void __iomem *addr, + spinlock_t *writeq_lock) +{ + writeq(cpu_to_le64(b), addr); +} +#endif + +/** + * mpt2sas_base_put_smid_scsi_io - send SCSI_IO request to firmware + * @ioc: per adapter object + * @smid: system request message index + * @vf_id: virtual function id + * @handle: device handle + * + * Return nothing. + */ +void +mpt2sas_base_put_smid_scsi_io(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 vf_id, + u16 handle) +{ + Mpi2RequestDescriptorUnion_t descriptor; + u64 *request = (u64 *)&descriptor; + + + descriptor.SCSIIO.RequestFlags = MPI2_REQ_DESCRIPT_FLAGS_SCSI_IO; + descriptor.SCSIIO.VF_ID = vf_id; + descriptor.SCSIIO.SMID = cpu_to_le16(smid); + descriptor.SCSIIO.DevHandle = cpu_to_le16(handle); + descriptor.SCSIIO.LMID = 0; + _base_writeq(*request, &ioc->chip->RequestDescriptorPostLow, + &ioc->scsi_lookup_lock); +} + + +/** + * mpt2sas_base_put_smid_hi_priority - send Task Managment request to firmware + * @ioc: per adapter object + * @smid: system request message index + * @vf_id: virtual function id + * + * Return nothing. + */ +void +mpt2sas_base_put_smid_hi_priority(struct MPT2SAS_ADAPTER *ioc, u16 smid, + u8 vf_id) +{ + Mpi2RequestDescriptorUnion_t descriptor; + u64 *request = (u64 *)&descriptor; + + descriptor.HighPriority.RequestFlags = + MPI2_REQ_DESCRIPT_FLAGS_HIGH_PRIORITY; + descriptor.HighPriority.VF_ID = vf_id; + descriptor.HighPriority.SMID = cpu_to_le16(smid); + descriptor.HighPriority.LMID = 0; + descriptor.HighPriority.Reserved1 = 0; + _base_writeq(*request, &ioc->chip->RequestDescriptorPostLow, + &ioc->scsi_lookup_lock); +} + +/** + * mpt2sas_base_put_smid_default - Default, primarily used for config pages + * @ioc: per adapter object + * @smid: system request message index + * @vf_id: virtual function id + * + * Return nothing. + */ +void +mpt2sas_base_put_smid_default(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 vf_id) +{ + Mpi2RequestDescriptorUnion_t descriptor; + u64 *request = (u64 *)&descriptor; + + descriptor.Default.RequestFlags = MPI2_REQ_DESCRIPT_FLAGS_DEFAULT_TYPE; + descriptor.Default.VF_ID = vf_id; + descriptor.Default.SMID = cpu_to_le16(smid); + descriptor.Default.LMID = 0; + descriptor.Default.DescriptorTypeDependent = 0; + _base_writeq(*request, &ioc->chip->RequestDescriptorPostLow, + &ioc->scsi_lookup_lock); +} + +/** + * mpt2sas_base_put_smid_target_assist - send Target Assist/Status to firmware + * @ioc: per adapter object + * @smid: system request message index + * @vf_id: virtual function id + * @io_index: value used to track the IO + * + * Return nothing. + */ +void +mpt2sas_base_put_smid_target_assist(struct MPT2SAS_ADAPTER *ioc, u16 smid, + u8 vf_id, u16 io_index) +{ + Mpi2RequestDescriptorUnion_t descriptor; + u64 *request = (u64 *)&descriptor; + + descriptor.SCSITarget.RequestFlags = + MPI2_REQ_DESCRIPT_FLAGS_SCSI_TARGET; + descriptor.SCSITarget.VF_ID = vf_id; + descriptor.SCSITarget.SMID = cpu_to_le16(smid); + descriptor.SCSITarget.LMID = 0; + descriptor.SCSITarget.IoIndex = cpu_to_le16(io_index); + _base_writeq(*request, &ioc->chip->RequestDescriptorPostLow, + &ioc->scsi_lookup_lock); +} + +/** + * _base_display_ioc_capabilities - Disply IOC's capabilities. + * @ioc: per adapter object + * + * Return nothing. + */ +static void +_base_display_ioc_capabilities(struct MPT2SAS_ADAPTER *ioc) +{ + int i = 0; + char desc[16]; + u8 revision; + u32 iounit_pg1_flags; + + pci_read_config_byte(ioc->pdev, PCI_CLASS_REVISION, &revision); + strncpy(desc, ioc->manu_pg0.ChipName, 16); + printk(MPT2SAS_INFO_FMT "%s: FWVersion(%02d.%02d.%02d.%02d), " + "ChipRevision(0x%02x), BiosVersion(%02d.%02d.%02d.%02d)\n", + ioc->name, desc, + (ioc->facts.FWVersion.Word & 0xFF000000) >> 24, + (ioc->facts.FWVersion.Word & 0x00FF0000) >> 16, + (ioc->facts.FWVersion.Word & 0x0000FF00) >> 8, + ioc->facts.FWVersion.Word & 0x000000FF, + revision, + (ioc->bios_pg3.BiosVersion & 0xFF000000) >> 24, + (ioc->bios_pg3.BiosVersion & 0x00FF0000) >> 16, + (ioc->bios_pg3.BiosVersion & 0x0000FF00) >> 8, + ioc->bios_pg3.BiosVersion & 0x000000FF); + + printk(MPT2SAS_INFO_FMT "Protocol=(", ioc->name); + + if (ioc->facts.ProtocolFlags & MPI2_IOCFACTS_PROTOCOL_SCSI_INITIATOR) { + printk("Initiator"); + i++; + } + + if (ioc->facts.ProtocolFlags & MPI2_IOCFACTS_PROTOCOL_SCSI_TARGET) { + printk("%sTarget", i ? "," : ""); + i++; + } + + i = 0; + printk("), "); + printk("Capabilities=("); + + if (ioc->facts.IOCCapabilities & + MPI2_IOCFACTS_CAPABILITY_INTEGRATED_RAID) { + printk("Raid"); + i++; + } + + if (ioc->facts.IOCCapabilities & MPI2_IOCFACTS_CAPABILITY_TLR) { + printk("%sTLR", i ? "," : ""); + i++; + } + + if (ioc->facts.IOCCapabilities & MPI2_IOCFACTS_CAPABILITY_MULTICAST) { + printk("%sMulticast", i ? "," : ""); + i++; + } + + if (ioc->facts.IOCCapabilities & + MPI2_IOCFACTS_CAPABILITY_BIDIRECTIONAL_TARGET) { + printk("%sBIDI Target", i ? "," : ""); + i++; + } + + if (ioc->facts.IOCCapabilities & MPI2_IOCFACTS_CAPABILITY_EEDP) { + printk("%sEEDP", i ? "," : ""); + i++; + } + + if (ioc->facts.IOCCapabilities & + MPI2_IOCFACTS_CAPABILITY_SNAPSHOT_BUFFER) { + printk("%sSnapshot Buffer", i ? "," : ""); + i++; + } + + if (ioc->facts.IOCCapabilities & + MPI2_IOCFACTS_CAPABILITY_DIAG_TRACE_BUFFER) { + printk("%sDiag Trace Buffer", i ? "," : ""); + i++; + } + + if (ioc->facts.IOCCapabilities & + MPI2_IOCFACTS_CAPABILITY_TASK_SET_FULL_HANDLING) { + printk("%sTask Set Full", i ? "," : ""); + i++; + } + + iounit_pg1_flags = le32_to_cpu(ioc->iounit_pg1.Flags); + if (!(iounit_pg1_flags & MPI2_IOUNITPAGE1_NATIVE_COMMAND_Q_DISABLE)) { + printk("%sNCQ", i ? "," : ""); + i++; + } + + printk(")\n"); +} + +/** + * _base_static_config_pages - static start of day config pages + * @ioc: per adapter object + * + * Return nothing. + */ +static void +_base_static_config_pages(struct MPT2SAS_ADAPTER *ioc) +{ + Mpi2ConfigReply_t mpi_reply; + u32 iounit_pg1_flags; + + mpt2sas_config_get_manufacturing_pg0(ioc, &mpi_reply, &ioc->manu_pg0); + mpt2sas_config_get_bios_pg2(ioc, &mpi_reply, &ioc->bios_pg2); + mpt2sas_config_get_bios_pg3(ioc, &mpi_reply, &ioc->bios_pg3); + mpt2sas_config_get_ioc_pg8(ioc, &mpi_reply, &ioc->ioc_pg8); + mpt2sas_config_get_iounit_pg0(ioc, &mpi_reply, &ioc->iounit_pg0); + mpt2sas_config_get_iounit_pg1(ioc, &mpi_reply, &ioc->iounit_pg1); + _base_display_ioc_capabilities(ioc); + + /* + * Enable task_set_full handling in iounit_pg1 when the + * facts capabilities indicate that its supported. + */ + iounit_pg1_flags = le32_to_cpu(ioc->iounit_pg1.Flags); + if ((ioc->facts.IOCCapabilities & + MPI2_IOCFACTS_CAPABILITY_TASK_SET_FULL_HANDLING)) + iounit_pg1_flags &= + ~MPI2_IOUNITPAGE1_DISABLE_TASK_SET_FULL_HANDLING; + else + iounit_pg1_flags |= + MPI2_IOUNITPAGE1_DISABLE_TASK_SET_FULL_HANDLING; + ioc->iounit_pg1.Flags = cpu_to_le32(iounit_pg1_flags); + mpt2sas_config_set_iounit_pg1(ioc, &mpi_reply, ioc->iounit_pg1); +} + +/** + * _base_release_memory_pools - release memory + * @ioc: per adapter object + * + * Free memory allocated from _base_allocate_memory_pools. + * + * Return nothing. + */ +static void +_base_release_memory_pools(struct MPT2SAS_ADAPTER *ioc) +{ + dexitprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s\n", ioc->name, + __func__)); + + if (ioc->request) { + pci_free_consistent(ioc->pdev, ioc->request_dma_sz, + ioc->request, ioc->request_dma); + dexitprintk(ioc, printk(MPT2SAS_INFO_FMT "request_pool(0x%p)" + ": free\n", ioc->name, ioc->request)); + ioc->request = NULL; + } + + if (ioc->sense) { + pci_pool_free(ioc->sense_dma_pool, ioc->sense, ioc->sense_dma); + if (ioc->sense_dma_pool) + pci_pool_destroy(ioc->sense_dma_pool); + dexitprintk(ioc, printk(MPT2SAS_INFO_FMT "sense_pool(0x%p)" + ": free\n", ioc->name, ioc->sense)); + ioc->sense = NULL; + } + + if (ioc->reply) { + pci_pool_free(ioc->reply_dma_pool, ioc->reply, ioc->reply_dma); + if (ioc->reply_dma_pool) + pci_pool_destroy(ioc->reply_dma_pool); + dexitprintk(ioc, printk(MPT2SAS_INFO_FMT "reply_pool(0x%p)" + ": free\n", ioc->name, ioc->reply)); + ioc->reply = NULL; + } + + if (ioc->reply_free) { + pci_pool_free(ioc->reply_free_dma_pool, ioc->reply_free, + ioc->reply_free_dma); + if (ioc->reply_free_dma_pool) + pci_pool_destroy(ioc->reply_free_dma_pool); + dexitprintk(ioc, printk(MPT2SAS_INFO_FMT "reply_free_pool" + "(0x%p): free\n", ioc->name, ioc->reply_free)); + ioc->reply_free = NULL; + } + + if (ioc->reply_post_free) { + pci_pool_free(ioc->reply_post_free_dma_pool, + ioc->reply_post_free, ioc->reply_post_free_dma); + if (ioc->reply_post_free_dma_pool) + pci_pool_destroy(ioc->reply_post_free_dma_pool); + dexitprintk(ioc, printk(MPT2SAS_INFO_FMT + "reply_post_free_pool(0x%p): free\n", ioc->name, + ioc->reply_post_free)); + ioc->reply_post_free = NULL; + } + + if (ioc->config_page) { + dexitprintk(ioc, printk(MPT2SAS_INFO_FMT + "config_page(0x%p): free\n", ioc->name, + ioc->config_page)); + pci_free_consistent(ioc->pdev, ioc->config_page_sz, + ioc->config_page, ioc->config_page_dma); + } + + kfree(ioc->scsi_lookup); +} + + +/** + * _base_allocate_memory_pools - allocate start of day memory pools + * @ioc: per adapter object + * @sleep_flag: CAN_SLEEP or NO_SLEEP + * + * Returns 0 success, anything else error + */ +static int +_base_allocate_memory_pools(struct MPT2SAS_ADAPTER *ioc, int sleep_flag) +{ + Mpi2IOCFactsReply_t *facts; + u32 queue_size, queue_diff; + u16 max_sge_elements; + u16 num_of_reply_frames; + u16 chains_needed_per_io; + u32 sz, total_sz; + u16 i; + u32 retry_sz; + u16 max_request_credit; + + dinitprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s\n", ioc->name, + __func__)); + + retry_sz = 0; + facts = &ioc->facts; + + /* command line tunables for max sgl entries */ + if (max_sgl_entries != -1) { + ioc->shost->sg_tablesize = (max_sgl_entries < + MPT2SAS_SG_DEPTH) ? max_sgl_entries : + MPT2SAS_SG_DEPTH; + } else { + ioc->shost->sg_tablesize = MPT2SAS_SG_DEPTH; + } + + /* command line tunables for max controller queue depth */ + if (max_queue_depth != -1) { + max_request_credit = (max_queue_depth < facts->RequestCredit) + ? max_queue_depth : facts->RequestCredit; + } else { + max_request_credit = (facts->RequestCredit > + MPT2SAS_MAX_REQUEST_QUEUE) ? MPT2SAS_MAX_REQUEST_QUEUE : + facts->RequestCredit; + } + ioc->request_depth = max_request_credit; + + /* request frame size */ + ioc->request_sz = facts->IOCRequestFrameSize * 4; + + /* reply frame size */ + ioc->reply_sz = facts->ReplyFrameSize * 4; + + retry_allocation: + total_sz = 0; + /* calculate number of sg elements left over in the 1st frame */ + max_sge_elements = ioc->request_sz - ((sizeof(Mpi2SCSIIORequest_t) - + sizeof(Mpi2SGEIOUnion_t)) + ioc->sge_size); + ioc->max_sges_in_main_message = max_sge_elements/ioc->sge_size; + + /* now do the same for a chain buffer */ + max_sge_elements = ioc->request_sz - ioc->sge_size; + ioc->max_sges_in_chain_message = max_sge_elements/ioc->sge_size; + + ioc->chain_offset_value_for_main_message = + ((sizeof(Mpi2SCSIIORequest_t) - sizeof(Mpi2SGEIOUnion_t)) + + (ioc->max_sges_in_chain_message * ioc->sge_size)) / 4; + + /* + * MPT2SAS_SG_DEPTH = CONFIG_FUSION_MAX_SGE + */ + chains_needed_per_io = ((ioc->shost->sg_tablesize - + ioc->max_sges_in_main_message)/ioc->max_sges_in_chain_message) + + 1; + if (chains_needed_per_io > facts->MaxChainDepth) { + chains_needed_per_io = facts->MaxChainDepth; + ioc->shost->sg_tablesize = min_t(u16, + ioc->max_sges_in_main_message + (ioc->max_sges_in_chain_message + * chains_needed_per_io), ioc->shost->sg_tablesize); + } + ioc->chains_needed_per_io = chains_needed_per_io; + + /* reply free queue sizing - taking into account for events */ + num_of_reply_frames = ioc->request_depth + 32; + + /* number of replies frames can't be a multiple of 16 */ + /* decrease number of reply frames by 1 */ + if (!(num_of_reply_frames % 16)) + num_of_reply_frames--; + + /* calculate number of reply free queue entries + * (must be multiple of 16) + */ + + /* (we know reply_free_queue_depth is not a multiple of 16) */ + queue_size = num_of_reply_frames; + queue_size += 16 - (queue_size % 16); + ioc->reply_free_queue_depth = queue_size; + + /* reply descriptor post queue sizing */ + /* this size should be the number of request frames + number of reply + * frames + */ + + queue_size = ioc->request_depth + num_of_reply_frames + 1; + /* round up to 16 byte boundary */ + if (queue_size % 16) + queue_size += 16 - (queue_size % 16); + + /* check against IOC maximum reply post queue depth */ + if (queue_size > facts->MaxReplyDescriptorPostQueueDepth) { + queue_diff = queue_size - + facts->MaxReplyDescriptorPostQueueDepth; + + /* round queue_diff up to multiple of 16 */ + if (queue_diff % 16) + queue_diff += 16 - (queue_diff % 16); + + /* adjust request_depth, reply_free_queue_depth, + * and queue_size + */ + ioc->request_depth -= queue_diff; + ioc->reply_free_queue_depth -= queue_diff; + queue_size -= queue_diff; + } + ioc->reply_post_queue_depth = queue_size; + + /* max scsi host queue depth */ + ioc->shost->can_queue = ioc->request_depth - INTERNAL_CMDS_COUNT; + dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "scsi host queue: depth" + "(%d)\n", ioc->name, ioc->shost->can_queue)); + + dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "scatter gather: " + "sge_in_main_msg(%d), sge_per_chain(%d), sge_per_io(%d), " + "chains_per_io(%d)\n", ioc->name, ioc->max_sges_in_main_message, + ioc->max_sges_in_chain_message, ioc->shost->sg_tablesize, + ioc->chains_needed_per_io)); + + /* contiguous pool for request and chains, 16 byte align, one extra " + * "frame for smid=0 + */ + ioc->chain_depth = ioc->chains_needed_per_io * ioc->request_depth; + sz = ((ioc->request_depth + 1 + ioc->chain_depth) * ioc->request_sz); + + ioc->request_dma_sz = sz; + ioc->request = pci_alloc_consistent(ioc->pdev, sz, &ioc->request_dma); + if (!ioc->request) { + printk(MPT2SAS_ERR_FMT "request pool: pci_alloc_consistent " + "failed: req_depth(%d), chains_per_io(%d), frame_sz(%d), " + "total(%d kB)\n", ioc->name, ioc->request_depth, + ioc->chains_needed_per_io, ioc->request_sz, sz/1024); + if (ioc->request_depth < MPT2SAS_SAS_QUEUE_DEPTH) + goto out; + retry_sz += 64; + ioc->request_depth = max_request_credit - retry_sz; + goto retry_allocation; + } + + if (retry_sz) + printk(MPT2SAS_ERR_FMT "request pool: pci_alloc_consistent " + "succeed: req_depth(%d), chains_per_io(%d), frame_sz(%d), " + "total(%d kb)\n", ioc->name, ioc->request_depth, + ioc->chains_needed_per_io, ioc->request_sz, sz/1024); + + ioc->chain = ioc->request + ((ioc->request_depth + 1) * + ioc->request_sz); + ioc->chain_dma = ioc->request_dma + ((ioc->request_depth + 1) * + ioc->request_sz); + dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "request pool(0x%p): " + "depth(%d), frame_size(%d), pool_size(%d kB)\n", ioc->name, + ioc->request, ioc->request_depth, ioc->request_sz, + ((ioc->request_depth + 1) * ioc->request_sz)/1024)); + dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "chain pool(0x%p): depth" + "(%d), frame_size(%d), pool_size(%d kB)\n", ioc->name, ioc->chain, + ioc->chain_depth, ioc->request_sz, ((ioc->chain_depth * + ioc->request_sz))/1024)); + dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "request pool: dma(0x%llx)\n", + ioc->name, (unsigned long long) ioc->request_dma)); + total_sz += sz; + + ioc->scsi_lookup = kcalloc(ioc->request_depth, + sizeof(struct request_tracker), GFP_KERNEL); + if (!ioc->scsi_lookup) { + printk(MPT2SAS_ERR_FMT "scsi_lookup: kcalloc failed\n", + ioc->name); + goto out; + } + + /* initialize some bits */ + for (i = 0; i < ioc->request_depth; i++) + ioc->scsi_lookup[i].smid = i + 1; + + /* sense buffers, 4 byte align */ + sz = ioc->request_depth * SCSI_SENSE_BUFFERSIZE; + ioc->sense_dma_pool = pci_pool_create("sense pool", ioc->pdev, sz, 4, + 0); + if (!ioc->sense_dma_pool) { + printk(MPT2SAS_ERR_FMT "sense pool: pci_pool_create failed\n", + ioc->name); + goto out; + } + ioc->sense = pci_pool_alloc(ioc->sense_dma_pool , GFP_KERNEL, + &ioc->sense_dma); + if (!ioc->sense) { + printk(MPT2SAS_ERR_FMT "sense pool: pci_pool_alloc failed\n", + ioc->name); + goto out; + } + dinitprintk(ioc, printk(MPT2SAS_INFO_FMT + "sense pool(0x%p): depth(%d), element_size(%d), pool_size" + "(%d kB)\n", ioc->name, ioc->sense, ioc->request_depth, + SCSI_SENSE_BUFFERSIZE, sz/1024)); + dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "sense_dma(0x%llx)\n", + ioc->name, (unsigned long long)ioc->sense_dma)); + total_sz += sz; + + /* reply pool, 4 byte align */ + sz = ioc->reply_free_queue_depth * ioc->reply_sz; + ioc->reply_dma_pool = pci_pool_create("reply pool", ioc->pdev, sz, 4, + 0); + if (!ioc->reply_dma_pool) { + printk(MPT2SAS_ERR_FMT "reply pool: pci_pool_create failed\n", + ioc->name); + goto out; + } + ioc->reply = pci_pool_alloc(ioc->reply_dma_pool , GFP_KERNEL, + &ioc->reply_dma); + if (!ioc->reply) { + printk(MPT2SAS_ERR_FMT "reply pool: pci_pool_alloc failed\n", + ioc->name); + goto out; + } + dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "reply pool(0x%p): depth" + "(%d), frame_size(%d), pool_size(%d kB)\n", ioc->name, ioc->reply, + ioc->reply_free_queue_depth, ioc->reply_sz, sz/1024)); + dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "reply_dma(0x%llx)\n", + ioc->name, (unsigned long long)ioc->reply_dma)); + total_sz += sz; + + /* reply free queue, 16 byte align */ + sz = ioc->reply_free_queue_depth * 4; + ioc->reply_free_dma_pool = pci_pool_create("reply_free pool", + ioc->pdev, sz, 16, 0); + if (!ioc->reply_free_dma_pool) { + printk(MPT2SAS_ERR_FMT "reply_free pool: pci_pool_create " + "failed\n", ioc->name); + goto out; + } + ioc->reply_free = pci_pool_alloc(ioc->reply_free_dma_pool , GFP_KERNEL, + &ioc->reply_free_dma); + if (!ioc->reply_free) { + printk(MPT2SAS_ERR_FMT "reply_free pool: pci_pool_alloc " + "failed\n", ioc->name); + goto out; + } + memset(ioc->reply_free, 0, sz); + dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "reply_free pool(0x%p): " + "depth(%d), element_size(%d), pool_size(%d kB)\n", ioc->name, + ioc->reply_free, ioc->reply_free_queue_depth, 4, sz/1024)); + dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "reply_free_dma" + "(0x%llx)\n", ioc->name, (unsigned long long)ioc->reply_free_dma)); + total_sz += sz; + + /* reply post queue, 16 byte align */ + sz = ioc->reply_post_queue_depth * sizeof(Mpi2DefaultReplyDescriptor_t); + ioc->reply_post_free_dma_pool = pci_pool_create("reply_post_free pool", + ioc->pdev, sz, 16, 0); + if (!ioc->reply_post_free_dma_pool) { + printk(MPT2SAS_ERR_FMT "reply_post_free pool: pci_pool_create " + "failed\n", ioc->name); + goto out; + } + ioc->reply_post_free = pci_pool_alloc(ioc->reply_post_free_dma_pool , + GFP_KERNEL, &ioc->reply_post_free_dma); + if (!ioc->reply_post_free) { + printk(MPT2SAS_ERR_FMT "reply_post_free pool: pci_pool_alloc " + "failed\n", ioc->name); + goto out; + } + memset(ioc->reply_post_free, 0, sz); + dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "reply post free pool" + "(0x%p): depth(%d), element_size(%d), pool_size(%d kB)\n", + ioc->name, ioc->reply_post_free, ioc->reply_post_queue_depth, 8, + sz/1024)); + dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "reply_post_free_dma = " + "(0x%llx)\n", ioc->name, (unsigned long long) + ioc->reply_post_free_dma)); + total_sz += sz; + + ioc->config_page_sz = 512; + ioc->config_page = pci_alloc_consistent(ioc->pdev, + ioc->config_page_sz, &ioc->config_page_dma); + if (!ioc->config_page) { + printk(MPT2SAS_ERR_FMT "config page: pci_pool_alloc " + "failed\n", ioc->name); + goto out; + } + dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "config page(0x%p): size" + "(%d)\n", ioc->name, ioc->config_page, ioc->config_page_sz)); + dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "config_page_dma" + "(0x%llx)\n", ioc->name, (unsigned long long)ioc->config_page_dma)); + total_sz += ioc->config_page_sz; + + printk(MPT2SAS_INFO_FMT "Allocated physical memory: size(%d kB)\n", + ioc->name, total_sz/1024); + printk(MPT2SAS_INFO_FMT "Current Controller Queue Depth(%d), " + "Max Controller Queue Depth(%d)\n", + ioc->name, ioc->shost->can_queue, facts->RequestCredit); + printk(MPT2SAS_INFO_FMT "Scatter Gather Elements per IO(%d)\n", + ioc->name, ioc->shost->sg_tablesize); + return 0; + + out: + _base_release_memory_pools(ioc); + return -ENOMEM; +} + + +/** + * mpt2sas_base_get_iocstate - Get the current state of a MPT adapter. + * @ioc: Pointer to MPT_ADAPTER structure + * @cooked: Request raw or cooked IOC state + * + * Returns all IOC Doorbell register bits if cooked==0, else just the + * Doorbell bits in MPI_IOC_STATE_MASK. + */ +u32 +mpt2sas_base_get_iocstate(struct MPT2SAS_ADAPTER *ioc, int cooked) +{ + u32 s, sc; + + s = readl(&ioc->chip->Doorbell); + sc = s & MPI2_IOC_STATE_MASK; + return cooked ? sc : s; +} + +/** + * _base_wait_on_iocstate - waiting on a particular ioc state + * @ioc_state: controller state { READY, OPERATIONAL, or RESET } + * @timeout: timeout in second + * @sleep_flag: CAN_SLEEP or NO_SLEEP + * + * Returns 0 for success, non-zero for failure. + */ +static int +_base_wait_on_iocstate(struct MPT2SAS_ADAPTER *ioc, u32 ioc_state, int timeout, + int sleep_flag) +{ + u32 count, cntdn; + u32 current_state; + + count = 0; + cntdn = (sleep_flag == CAN_SLEEP) ? 1000*timeout : 2000*timeout; + do { + current_state = mpt2sas_base_get_iocstate(ioc, 1); + if (current_state == ioc_state) + return 0; + if (count && current_state == MPI2_IOC_STATE_FAULT) + break; + if (sleep_flag == CAN_SLEEP) + msleep(1); + else + udelay(500); + count++; + } while (--cntdn); + + return current_state; +} + +/** + * _base_wait_for_doorbell_int - waiting for controller interrupt(generated by + * a write to the doorbell) + * @ioc: per adapter object + * @timeout: timeout in second + * @sleep_flag: CAN_SLEEP or NO_SLEEP + * + * Returns 0 for success, non-zero for failure. + * + * Notes: MPI2_HIS_IOC2SYS_DB_STATUS - set to one when IOC writes to doorbell. + */ +static int +_base_wait_for_doorbell_int(struct MPT2SAS_ADAPTER *ioc, int timeout, + int sleep_flag) +{ + u32 cntdn, count; + u32 int_status; + + count = 0; + cntdn = (sleep_flag == CAN_SLEEP) ? 1000*timeout : 2000*timeout; + do { + int_status = readl(&ioc->chip->HostInterruptStatus); + if (int_status & MPI2_HIS_IOC2SYS_DB_STATUS) { + dhsprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s: " + "successfull count(%d), timeout(%d)\n", ioc->name, + __func__, count, timeout)); + return 0; + } + if (sleep_flag == CAN_SLEEP) + msleep(1); + else + udelay(500); + count++; + } while (--cntdn); + + printk(MPT2SAS_ERR_FMT "%s: failed due to timeout count(%d), " + "int_status(%x)!\n", ioc->name, __func__, count, int_status); + return -EFAULT; +} + +/** + * _base_wait_for_doorbell_ack - waiting for controller to read the doorbell. + * @ioc: per adapter object + * @timeout: timeout in second + * @sleep_flag: CAN_SLEEP or NO_SLEEP + * + * Returns 0 for success, non-zero for failure. + * + * Notes: MPI2_HIS_SYS2IOC_DB_STATUS - set to one when host writes to + * doorbell. + */ +static int +_base_wait_for_doorbell_ack(struct MPT2SAS_ADAPTER *ioc, int timeout, + int sleep_flag) +{ + u32 cntdn, count; + u32 int_status; + u32 doorbell; + + count = 0; + cntdn = (sleep_flag == CAN_SLEEP) ? 1000*timeout : 2000*timeout; + do { + int_status = readl(&ioc->chip->HostInterruptStatus); + if (!(int_status & MPI2_HIS_SYS2IOC_DB_STATUS)) { + dhsprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s: " + "successfull count(%d), timeout(%d)\n", ioc->name, + __func__, count, timeout)); + return 0; + } else if (int_status & MPI2_HIS_IOC2SYS_DB_STATUS) { + doorbell = readl(&ioc->chip->Doorbell); + if ((doorbell & MPI2_IOC_STATE_MASK) == + MPI2_IOC_STATE_FAULT) { + mpt2sas_base_fault_info(ioc , doorbell); + return -EFAULT; + } + } else if (int_status == 0xFFFFFFFF) + goto out; + + if (sleep_flag == CAN_SLEEP) + msleep(1); + else + udelay(500); + count++; + } while (--cntdn); + + out: + printk(MPT2SAS_ERR_FMT "%s: failed due to timeout count(%d), " + "int_status(%x)!\n", ioc->name, __func__, count, int_status); + return -EFAULT; +} + +/** + * _base_wait_for_doorbell_not_used - waiting for doorbell to not be in use + * @ioc: per adapter object + * @timeout: timeout in second + * @sleep_flag: CAN_SLEEP or NO_SLEEP + * + * Returns 0 for success, non-zero for failure. + * + */ +static int +_base_wait_for_doorbell_not_used(struct MPT2SAS_ADAPTER *ioc, int timeout, + int sleep_flag) +{ + u32 cntdn, count; + u32 doorbell_reg; + + count = 0; + cntdn = (sleep_flag == CAN_SLEEP) ? 1000*timeout : 2000*timeout; + do { + doorbell_reg = readl(&ioc->chip->Doorbell); + if (!(doorbell_reg & MPI2_DOORBELL_USED)) { + dhsprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s: " + "successfull count(%d), timeout(%d)\n", ioc->name, + __func__, count, timeout)); + return 0; + } + if (sleep_flag == CAN_SLEEP) + msleep(1); + else + udelay(500); + count++; + } while (--cntdn); + + printk(MPT2SAS_ERR_FMT "%s: failed due to timeout count(%d), " + "doorbell_reg(%x)!\n", ioc->name, __func__, count, doorbell_reg); + return -EFAULT; +} + +/** + * _base_send_ioc_reset - send doorbell reset + * @ioc: per adapter object + * @reset_type: currently only supports: MPI2_FUNCTION_IOC_MESSAGE_UNIT_RESET + * @timeout: timeout in second + * @sleep_flag: CAN_SLEEP or NO_SLEEP + * + * Returns 0 for success, non-zero for failure. + */ +static int +_base_send_ioc_reset(struct MPT2SAS_ADAPTER *ioc, u8 reset_type, int timeout, + int sleep_flag) +{ + u32 ioc_state; + int r = 0; + + if (reset_type != MPI2_FUNCTION_IOC_MESSAGE_UNIT_RESET) { + printk(MPT2SAS_ERR_FMT "%s: unknown reset_type\n", + ioc->name, __func__); + return -EFAULT; + } + + if (!(ioc->facts.IOCCapabilities & + MPI2_IOCFACTS_CAPABILITY_EVENT_REPLAY)) + return -EFAULT; + + printk(MPT2SAS_INFO_FMT "sending message unit reset !!\n", ioc->name); + + writel(reset_type << MPI2_DOORBELL_FUNCTION_SHIFT, + &ioc->chip->Doorbell); + if ((_base_wait_for_doorbell_ack(ioc, 15, sleep_flag))) { + r = -EFAULT; + goto out; + } + ioc_state = _base_wait_on_iocstate(ioc, MPI2_IOC_STATE_READY, + timeout, sleep_flag); + if (ioc_state) { + printk(MPT2SAS_ERR_FMT "%s: failed going to ready state " + " (ioc_state=0x%x)\n", ioc->name, __func__, ioc_state); + r = -EFAULT; + goto out; + } + out: + printk(MPT2SAS_INFO_FMT "message unit reset: %s\n", + ioc->name, ((r == 0) ? "SUCCESS" : "FAILED")); + return r; +} + +/** + * _base_handshake_req_reply_wait - send request thru doorbell interface + * @ioc: per adapter object + * @request_bytes: request length + * @request: pointer having request payload + * @reply_bytes: reply length + * @reply: pointer to reply payload + * @timeout: timeout in second + * @sleep_flag: CAN_SLEEP or NO_SLEEP + * + * Returns 0 for success, non-zero for failure. + */ +static int +_base_handshake_req_reply_wait(struct MPT2SAS_ADAPTER *ioc, int request_bytes, + u32 *request, int reply_bytes, u16 *reply, int timeout, int sleep_flag) +{ + MPI2DefaultReply_t *default_reply = (MPI2DefaultReply_t *)reply; + int i; + u8 failed; + u16 dummy; + u32 *mfp; + + /* make sure doorbell is not in use */ + if ((readl(&ioc->chip->Doorbell) & MPI2_DOORBELL_USED)) { + printk(MPT2SAS_ERR_FMT "doorbell is in use " + " (line=%d)\n", ioc->name, __LINE__); + return -EFAULT; + } + + /* clear pending doorbell interrupts from previous state changes */ + if (readl(&ioc->chip->HostInterruptStatus) & + MPI2_HIS_IOC2SYS_DB_STATUS) + writel(0, &ioc->chip->HostInterruptStatus); + + /* send message to ioc */ + writel(((MPI2_FUNCTION_HANDSHAKE<chip->Doorbell); + + if ((_base_wait_for_doorbell_int(ioc, 5, sleep_flag))) { + printk(MPT2SAS_ERR_FMT "doorbell handshake " + "int failed (line=%d)\n", ioc->name, __LINE__); + return -EFAULT; + } + writel(0, &ioc->chip->HostInterruptStatus); + + if ((_base_wait_for_doorbell_ack(ioc, 5, sleep_flag))) { + printk(MPT2SAS_ERR_FMT "doorbell handshake " + "ack failed (line=%d)\n", ioc->name, __LINE__); + return -EFAULT; + } + + /* send message 32-bits at a time */ + for (i = 0, failed = 0; i < request_bytes/4 && !failed; i++) { + writel(cpu_to_le32(request[i]), &ioc->chip->Doorbell); + if ((_base_wait_for_doorbell_ack(ioc, 5, sleep_flag))) + failed = 1; + } + + if (failed) { + printk(MPT2SAS_ERR_FMT "doorbell handshake " + "sending request failed (line=%d)\n", ioc->name, __LINE__); + return -EFAULT; + } + + /* now wait for the reply */ + if ((_base_wait_for_doorbell_int(ioc, timeout, sleep_flag))) { + printk(MPT2SAS_ERR_FMT "doorbell handshake " + "int failed (line=%d)\n", ioc->name, __LINE__); + return -EFAULT; + } + + /* read the first two 16-bits, it gives the total length of the reply */ + reply[0] = le16_to_cpu(readl(&ioc->chip->Doorbell) + & MPI2_DOORBELL_DATA_MASK); + writel(0, &ioc->chip->HostInterruptStatus); + if ((_base_wait_for_doorbell_int(ioc, 5, sleep_flag))) { + printk(MPT2SAS_ERR_FMT "doorbell handshake " + "int failed (line=%d)\n", ioc->name, __LINE__); + return -EFAULT; + } + reply[1] = le16_to_cpu(readl(&ioc->chip->Doorbell) + & MPI2_DOORBELL_DATA_MASK); + writel(0, &ioc->chip->HostInterruptStatus); + + for (i = 2; i < default_reply->MsgLength * 2; i++) { + if ((_base_wait_for_doorbell_int(ioc, 5, sleep_flag))) { + printk(MPT2SAS_ERR_FMT "doorbell " + "handshake int failed (line=%d)\n", ioc->name, + __LINE__); + return -EFAULT; + } + if (i >= reply_bytes/2) /* overflow case */ + dummy = readl(&ioc->chip->Doorbell); + else + reply[i] = le16_to_cpu(readl(&ioc->chip->Doorbell) + & MPI2_DOORBELL_DATA_MASK); + writel(0, &ioc->chip->HostInterruptStatus); + } + + _base_wait_for_doorbell_int(ioc, 5, sleep_flag); + if (_base_wait_for_doorbell_not_used(ioc, 5, sleep_flag) != 0) { + dhsprintk(ioc, printk(MPT2SAS_INFO_FMT "doorbell is in use " + " (line=%d)\n", ioc->name, __LINE__)); + } + writel(0, &ioc->chip->HostInterruptStatus); + + if (ioc->logging_level & MPT_DEBUG_INIT) { + mfp = (u32 *)reply; + printk(KERN_DEBUG "\toffset:data\n"); + for (i = 0; i < reply_bytes/4; i++) + printk(KERN_DEBUG "\t[0x%02x]:%08x\n", i*4, + le32_to_cpu(mfp[i])); + } + return 0; +} + +/** + * mpt2sas_base_sas_iounit_control - send sas iounit control to FW + * @ioc: per adapter object + * @mpi_reply: the reply payload from FW + * @mpi_request: the request payload sent to FW + * + * The SAS IO Unit Control Request message allows the host to perform low-level + * operations, such as resets on the PHYs of the IO Unit, also allows the host + * to obtain the IOC assigned device handles for a device if it has other + * identifying information about the device, in addition allows the host to + * remove IOC resources associated with the device. + * + * Returns 0 for success, non-zero for failure. + */ +int +mpt2sas_base_sas_iounit_control(struct MPT2SAS_ADAPTER *ioc, + Mpi2SasIoUnitControlReply_t *mpi_reply, + Mpi2SasIoUnitControlRequest_t *mpi_request) +{ + u16 smid; + u32 ioc_state; + unsigned long timeleft; + u8 issue_reset; + int rc; + void *request; + u16 wait_state_count; + + dinitprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s\n", ioc->name, + __func__)); + + mutex_lock(&ioc->base_cmds.mutex); + + if (ioc->base_cmds.status != MPT2_CMD_NOT_USED) { + printk(MPT2SAS_ERR_FMT "%s: base_cmd in use\n", + ioc->name, __func__); + rc = -EAGAIN; + goto out; + } + + wait_state_count = 0; + ioc_state = mpt2sas_base_get_iocstate(ioc, 1); + while (ioc_state != MPI2_IOC_STATE_OPERATIONAL) { + if (wait_state_count++ == 10) { + printk(MPT2SAS_ERR_FMT + "%s: failed due to ioc not operational\n", + ioc->name, __func__); + rc = -EFAULT; + goto out; + } + ssleep(1); + ioc_state = mpt2sas_base_get_iocstate(ioc, 1); + printk(MPT2SAS_INFO_FMT "%s: waiting for " + "operational state(count=%d)\n", ioc->name, + __func__, wait_state_count); + } + + smid = mpt2sas_base_get_smid(ioc, ioc->base_cb_idx); + if (!smid) { + printk(MPT2SAS_ERR_FMT "%s: failed obtaining a smid\n", + ioc->name, __func__); + rc = -EAGAIN; + goto out; + } + + rc = 0; + ioc->base_cmds.status = MPT2_CMD_PENDING; + request = mpt2sas_base_get_msg_frame(ioc, smid); + ioc->base_cmds.smid = smid; + memcpy(request, mpi_request, sizeof(Mpi2SasIoUnitControlRequest_t)); + if (mpi_request->Operation == MPI2_SAS_OP_PHY_HARD_RESET || + mpi_request->Operation == MPI2_SAS_OP_PHY_LINK_RESET) + ioc->ioc_link_reset_in_progress = 1; + mpt2sas_base_put_smid_default(ioc, smid, mpi_request->VF_ID); + timeleft = wait_for_completion_timeout(&ioc->base_cmds.done, + msecs_to_jiffies(10000)); + if ((mpi_request->Operation == MPI2_SAS_OP_PHY_HARD_RESET || + mpi_request->Operation == MPI2_SAS_OP_PHY_LINK_RESET) && + ioc->ioc_link_reset_in_progress) + ioc->ioc_link_reset_in_progress = 0; + if (!(ioc->base_cmds.status & MPT2_CMD_COMPLETE)) { + printk(MPT2SAS_ERR_FMT "%s: timeout\n", + ioc->name, __func__); + _debug_dump_mf(mpi_request, + sizeof(Mpi2SasIoUnitControlRequest_t)/4); + if (!(ioc->base_cmds.status & MPT2_CMD_RESET)) + issue_reset = 1; + goto issue_host_reset; + } + if (ioc->base_cmds.status & MPT2_CMD_REPLY_VALID) + memcpy(mpi_reply, ioc->base_cmds.reply, + sizeof(Mpi2SasIoUnitControlReply_t)); + else + memset(mpi_reply, 0, sizeof(Mpi2SasIoUnitControlReply_t)); + ioc->base_cmds.status = MPT2_CMD_NOT_USED; + goto out; + + issue_host_reset: + if (issue_reset) + mpt2sas_base_hard_reset_handler(ioc, CAN_SLEEP, + FORCE_BIG_HAMMER); + ioc->base_cmds.status = MPT2_CMD_NOT_USED; + rc = -EFAULT; + out: + mutex_unlock(&ioc->base_cmds.mutex); + return rc; +} + + +/** + * mpt2sas_base_scsi_enclosure_processor - sending request to sep device + * @ioc: per adapter object + * @mpi_reply: the reply payload from FW + * @mpi_request: the request payload sent to FW + * + * The SCSI Enclosure Processor request message causes the IOC to + * communicate with SES devices to control LED status signals. + * + * Returns 0 for success, non-zero for failure. + */ +int +mpt2sas_base_scsi_enclosure_processor(struct MPT2SAS_ADAPTER *ioc, + Mpi2SepReply_t *mpi_reply, Mpi2SepRequest_t *mpi_request) +{ + u16 smid; + u32 ioc_state; + unsigned long timeleft; + u8 issue_reset; + int rc; + void *request; + u16 wait_state_count; + + dinitprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s\n", ioc->name, + __func__)); + + mutex_lock(&ioc->base_cmds.mutex); + + if (ioc->base_cmds.status != MPT2_CMD_NOT_USED) { + printk(MPT2SAS_ERR_FMT "%s: base_cmd in use\n", + ioc->name, __func__); + rc = -EAGAIN; + goto out; + } + + wait_state_count = 0; + ioc_state = mpt2sas_base_get_iocstate(ioc, 1); + while (ioc_state != MPI2_IOC_STATE_OPERATIONAL) { + if (wait_state_count++ == 10) { + printk(MPT2SAS_ERR_FMT + "%s: failed due to ioc not operational\n", + ioc->name, __func__); + rc = -EFAULT; + goto out; + } + ssleep(1); + ioc_state = mpt2sas_base_get_iocstate(ioc, 1); + printk(MPT2SAS_INFO_FMT "%s: waiting for " + "operational state(count=%d)\n", ioc->name, + __func__, wait_state_count); + } + + smid = mpt2sas_base_get_smid(ioc, ioc->base_cb_idx); + if (!smid) { + printk(MPT2SAS_ERR_FMT "%s: failed obtaining a smid\n", + ioc->name, __func__); + rc = -EAGAIN; + goto out; + } + + rc = 0; + ioc->base_cmds.status = MPT2_CMD_PENDING; + request = mpt2sas_base_get_msg_frame(ioc, smid); + ioc->base_cmds.smid = smid; + memcpy(request, mpi_request, sizeof(Mpi2SepReply_t)); + mpt2sas_base_put_smid_default(ioc, smid, mpi_request->VF_ID); + timeleft = wait_for_completion_timeout(&ioc->base_cmds.done, + msecs_to_jiffies(10000)); + if (!(ioc->base_cmds.status & MPT2_CMD_COMPLETE)) { + printk(MPT2SAS_ERR_FMT "%s: timeout\n", + ioc->name, __func__); + _debug_dump_mf(mpi_request, + sizeof(Mpi2SepRequest_t)/4); + if (!(ioc->base_cmds.status & MPT2_CMD_RESET)) + issue_reset = 1; + goto issue_host_reset; + } + if (ioc->base_cmds.status & MPT2_CMD_REPLY_VALID) + memcpy(mpi_reply, ioc->base_cmds.reply, + sizeof(Mpi2SepReply_t)); + else + memset(mpi_reply, 0, sizeof(Mpi2SepReply_t)); + ioc->base_cmds.status = MPT2_CMD_NOT_USED; + goto out; + + issue_host_reset: + if (issue_reset) + mpt2sas_base_hard_reset_handler(ioc, CAN_SLEEP, + FORCE_BIG_HAMMER); + ioc->base_cmds.status = MPT2_CMD_NOT_USED; + rc = -EFAULT; + out: + mutex_unlock(&ioc->base_cmds.mutex); + return rc; +} + +/** + * _base_get_port_facts - obtain port facts reply and save in ioc + * @ioc: per adapter object + * @sleep_flag: CAN_SLEEP or NO_SLEEP + * + * Returns 0 for success, non-zero for failure. + */ +static int +_base_get_port_facts(struct MPT2SAS_ADAPTER *ioc, int port, int sleep_flag) +{ + Mpi2PortFactsRequest_t mpi_request; + Mpi2PortFactsReply_t mpi_reply, *pfacts; + int mpi_reply_sz, mpi_request_sz, r; + + dinitprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s\n", ioc->name, + __func__)); + + mpi_reply_sz = sizeof(Mpi2PortFactsReply_t); + mpi_request_sz = sizeof(Mpi2PortFactsRequest_t); + memset(&mpi_request, 0, mpi_request_sz); + mpi_request.Function = MPI2_FUNCTION_PORT_FACTS; + mpi_request.PortNumber = port; + r = _base_handshake_req_reply_wait(ioc, mpi_request_sz, + (u32 *)&mpi_request, mpi_reply_sz, (u16 *)&mpi_reply, 5, CAN_SLEEP); + + if (r != 0) { + printk(MPT2SAS_ERR_FMT "%s: handshake failed (r=%d)\n", + ioc->name, __func__, r); + return r; + } + + pfacts = &ioc->pfacts[port]; + memset(pfacts, 0, sizeof(Mpi2PortFactsReply_t)); + pfacts->PortNumber = mpi_reply.PortNumber; + pfacts->VP_ID = mpi_reply.VP_ID; + pfacts->VF_ID = mpi_reply.VF_ID; + pfacts->MaxPostedCmdBuffers = + le16_to_cpu(mpi_reply.MaxPostedCmdBuffers); + + return 0; +} + +/** + * _base_get_ioc_facts - obtain ioc facts reply and save in ioc + * @ioc: per adapter object + * @sleep_flag: CAN_SLEEP or NO_SLEEP + * + * Returns 0 for success, non-zero for failure. + */ +static int +_base_get_ioc_facts(struct MPT2SAS_ADAPTER *ioc, int sleep_flag) +{ + Mpi2IOCFactsRequest_t mpi_request; + Mpi2IOCFactsReply_t mpi_reply, *facts; + int mpi_reply_sz, mpi_request_sz, r; + + dinitprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s\n", ioc->name, + __func__)); + + mpi_reply_sz = sizeof(Mpi2IOCFactsReply_t); + mpi_request_sz = sizeof(Mpi2IOCFactsRequest_t); + memset(&mpi_request, 0, mpi_request_sz); + mpi_request.Function = MPI2_FUNCTION_IOC_FACTS; + r = _base_handshake_req_reply_wait(ioc, mpi_request_sz, + (u32 *)&mpi_request, mpi_reply_sz, (u16 *)&mpi_reply, 5, CAN_SLEEP); + + if (r != 0) { + printk(MPT2SAS_ERR_FMT "%s: handshake failed (r=%d)\n", + ioc->name, __func__, r); + return r; + } + + facts = &ioc->facts; + memset(facts, 0, sizeof(Mpi2IOCFactsReply_t)); + facts->MsgVersion = le16_to_cpu(mpi_reply.MsgVersion); + facts->HeaderVersion = le16_to_cpu(mpi_reply.HeaderVersion); + facts->VP_ID = mpi_reply.VP_ID; + facts->VF_ID = mpi_reply.VF_ID; + facts->IOCExceptions = le16_to_cpu(mpi_reply.IOCExceptions); + facts->MaxChainDepth = mpi_reply.MaxChainDepth; + facts->WhoInit = mpi_reply.WhoInit; + facts->NumberOfPorts = mpi_reply.NumberOfPorts; + facts->RequestCredit = le16_to_cpu(mpi_reply.RequestCredit); + facts->MaxReplyDescriptorPostQueueDepth = + le16_to_cpu(mpi_reply.MaxReplyDescriptorPostQueueDepth); + facts->ProductID = le16_to_cpu(mpi_reply.ProductID); + facts->IOCCapabilities = le32_to_cpu(mpi_reply.IOCCapabilities); + if ((facts->IOCCapabilities & MPI2_IOCFACTS_CAPABILITY_INTEGRATED_RAID)) + ioc->ir_firmware = 1; + facts->FWVersion.Word = le32_to_cpu(mpi_reply.FWVersion.Word); + facts->IOCRequestFrameSize = + le16_to_cpu(mpi_reply.IOCRequestFrameSize); + facts->MaxInitiators = le16_to_cpu(mpi_reply.MaxInitiators); + facts->MaxTargets = le16_to_cpu(mpi_reply.MaxTargets); + ioc->shost->max_id = -1; + facts->MaxSasExpanders = le16_to_cpu(mpi_reply.MaxSasExpanders); + facts->MaxEnclosures = le16_to_cpu(mpi_reply.MaxEnclosures); + facts->ProtocolFlags = le16_to_cpu(mpi_reply.ProtocolFlags); + facts->HighPriorityCredit = + le16_to_cpu(mpi_reply.HighPriorityCredit); + facts->ReplyFrameSize = mpi_reply.ReplyFrameSize; + facts->MaxDevHandle = le16_to_cpu(mpi_reply.MaxDevHandle); + + dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "hba queue depth(%d), " + "max chains per io(%d)\n", ioc->name, facts->RequestCredit, + facts->MaxChainDepth)); + dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "request frame size(%d), " + "reply frame size(%d)\n", ioc->name, + facts->IOCRequestFrameSize * 4, facts->ReplyFrameSize * 4)); + return 0; +} + +/** + * _base_send_ioc_init - send ioc_init to firmware + * @ioc: per adapter object + * @VF_ID: virtual function id + * @sleep_flag: CAN_SLEEP or NO_SLEEP + * + * Returns 0 for success, non-zero for failure. + */ +static int +_base_send_ioc_init(struct MPT2SAS_ADAPTER *ioc, u8 VF_ID, int sleep_flag) +{ + Mpi2IOCInitRequest_t mpi_request; + Mpi2IOCInitReply_t mpi_reply; + int r; + + dinitprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s\n", ioc->name, + __func__)); + + memset(&mpi_request, 0, sizeof(Mpi2IOCInitRequest_t)); + mpi_request.Function = MPI2_FUNCTION_IOC_INIT; + mpi_request.WhoInit = MPI2_WHOINIT_HOST_DRIVER; + mpi_request.VF_ID = VF_ID; + mpi_request.MsgVersion = cpu_to_le16(MPI2_VERSION); + mpi_request.HeaderVersion = cpu_to_le16(MPI2_HEADER_VERSION); + + /* In MPI Revision I (0xA), the SystemReplyFrameSize(offset 0x18) was + * removed and made reserved. For those with older firmware will need + * this fix. It was decided that the Reply and Request frame sizes are + * the same. + */ + if ((ioc->facts.HeaderVersion >> 8) < 0xA) { + mpi_request.Reserved7 = cpu_to_le16(ioc->reply_sz); +/* mpi_request.SystemReplyFrameSize = + * cpu_to_le16(ioc->reply_sz); + */ + } + + mpi_request.SystemRequestFrameSize = cpu_to_le16(ioc->request_sz/4); + mpi_request.ReplyDescriptorPostQueueDepth = + cpu_to_le16(ioc->reply_post_queue_depth); + mpi_request.ReplyFreeQueueDepth = + cpu_to_le16(ioc->reply_free_queue_depth); + +#if BITS_PER_LONG > 32 + mpi_request.SenseBufferAddressHigh = + cpu_to_le32(ioc->sense_dma >> 32); + mpi_request.SystemReplyAddressHigh = + cpu_to_le32(ioc->reply_dma >> 32); + mpi_request.SystemRequestFrameBaseAddress = + cpu_to_le64(ioc->request_dma); + mpi_request.ReplyFreeQueueAddress = + cpu_to_le64(ioc->reply_free_dma); + mpi_request.ReplyDescriptorPostQueueAddress = + cpu_to_le64(ioc->reply_post_free_dma); +#else + mpi_request.SystemRequestFrameBaseAddress = + cpu_to_le32(ioc->request_dma); + mpi_request.ReplyFreeQueueAddress = + cpu_to_le32(ioc->reply_free_dma); + mpi_request.ReplyDescriptorPostQueueAddress = + cpu_to_le32(ioc->reply_post_free_dma); +#endif + + if (ioc->logging_level & MPT_DEBUG_INIT) { + u32 *mfp; + int i; + + mfp = (u32 *)&mpi_request; + printk(KERN_DEBUG "\toffset:data\n"); + for (i = 0; i < sizeof(Mpi2IOCInitRequest_t)/4; i++) + printk(KERN_DEBUG "\t[0x%02x]:%08x\n", i*4, + le32_to_cpu(mfp[i])); + } + + r = _base_handshake_req_reply_wait(ioc, + sizeof(Mpi2IOCInitRequest_t), (u32 *)&mpi_request, + sizeof(Mpi2IOCInitReply_t), (u16 *)&mpi_reply, 10, + sleep_flag); + + if (r != 0) { + printk(MPT2SAS_ERR_FMT "%s: handshake failed (r=%d)\n", + ioc->name, __func__, r); + return r; + } + + if (mpi_reply.IOCStatus != MPI2_IOCSTATUS_SUCCESS || + mpi_reply.IOCLogInfo) { + printk(MPT2SAS_ERR_FMT "%s: failed\n", ioc->name, __func__); + r = -EIO; + } + + return 0; +} + +/** + * _base_send_port_enable - send port_enable(discovery stuff) to firmware + * @ioc: per adapter object + * @VF_ID: virtual function id + * @sleep_flag: CAN_SLEEP or NO_SLEEP + * + * Returns 0 for success, non-zero for failure. + */ +static int +_base_send_port_enable(struct MPT2SAS_ADAPTER *ioc, u8 VF_ID, int sleep_flag) +{ + Mpi2PortEnableRequest_t *mpi_request; + u32 ioc_state; + unsigned long timeleft; + int r = 0; + u16 smid; + + printk(MPT2SAS_INFO_FMT "sending port enable !!\n", ioc->name); + + if (ioc->base_cmds.status & MPT2_CMD_PENDING) { + printk(MPT2SAS_ERR_FMT "%s: internal command already in use\n", + ioc->name, __func__); + return -EAGAIN; + } + + smid = mpt2sas_base_get_smid(ioc, ioc->base_cb_idx); + if (!smid) { + printk(MPT2SAS_ERR_FMT "%s: failed obtaining a smid\n", + ioc->name, __func__); + return -EAGAIN; + } + + ioc->base_cmds.status = MPT2_CMD_PENDING; + mpi_request = mpt2sas_base_get_msg_frame(ioc, smid); + ioc->base_cmds.smid = smid; + memset(mpi_request, 0, sizeof(Mpi2PortEnableRequest_t)); + mpi_request->Function = MPI2_FUNCTION_PORT_ENABLE; + mpi_request->VF_ID = VF_ID; + + mpt2sas_base_put_smid_default(ioc, smid, VF_ID); + timeleft = wait_for_completion_timeout(&ioc->base_cmds.done, + 300*HZ); + if (!(ioc->base_cmds.status & MPT2_CMD_COMPLETE)) { + printk(MPT2SAS_ERR_FMT "%s: timeout\n", + ioc->name, __func__); + _debug_dump_mf(mpi_request, + sizeof(Mpi2PortEnableRequest_t)/4); + if (ioc->base_cmds.status & MPT2_CMD_RESET) + r = -EFAULT; + else + r = -ETIME; + goto out; + } else + dinitprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s: complete\n", + ioc->name, __func__)); + + ioc_state = _base_wait_on_iocstate(ioc, MPI2_IOC_STATE_OPERATIONAL, + 60, sleep_flag); + if (ioc_state) { + printk(MPT2SAS_ERR_FMT "%s: failed going to operational state " + " (ioc_state=0x%x)\n", ioc->name, __func__, ioc_state); + r = -EFAULT; + } + out: + ioc->base_cmds.status = MPT2_CMD_NOT_USED; + printk(MPT2SAS_INFO_FMT "port enable: %s\n", + ioc->name, ((r == 0) ? "SUCCESS" : "FAILED")); + return r; +} + +/** + * _base_unmask_events - turn on notification for this event + * @ioc: per adapter object + * @event: firmware event + * + * The mask is stored in ioc->event_masks. + */ +static void +_base_unmask_events(struct MPT2SAS_ADAPTER *ioc, u16 event) +{ + u32 desired_event; + + if (event >= 128) + return; + + desired_event = (1 << (event % 32)); + + if (event < 32) + ioc->event_masks[0] &= ~desired_event; + else if (event < 64) + ioc->event_masks[1] &= ~desired_event; + else if (event < 96) + ioc->event_masks[2] &= ~desired_event; + else if (event < 128) + ioc->event_masks[3] &= ~desired_event; +} + +/** + * _base_event_notification - send event notification + * @ioc: per adapter object + * @VF_ID: virtual function id + * @sleep_flag: CAN_SLEEP or NO_SLEEP + * + * Returns 0 for success, non-zero for failure. + */ +static int +_base_event_notification(struct MPT2SAS_ADAPTER *ioc, u8 VF_ID, int sleep_flag) +{ + Mpi2EventNotificationRequest_t *mpi_request; + unsigned long timeleft; + u16 smid; + int r = 0; + int i; + + dinitprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s\n", ioc->name, + __func__)); + + if (ioc->base_cmds.status & MPT2_CMD_PENDING) { + printk(MPT2SAS_ERR_FMT "%s: internal command already in use\n", + ioc->name, __func__); + return -EAGAIN; + } + + smid = mpt2sas_base_get_smid(ioc, ioc->base_cb_idx); + if (!smid) { + printk(MPT2SAS_ERR_FMT "%s: failed obtaining a smid\n", + ioc->name, __func__); + return -EAGAIN; + } + ioc->base_cmds.status = MPT2_CMD_PENDING; + mpi_request = mpt2sas_base_get_msg_frame(ioc, smid); + ioc->base_cmds.smid = smid; + memset(mpi_request, 0, sizeof(Mpi2EventNotificationRequest_t)); + mpi_request->Function = MPI2_FUNCTION_EVENT_NOTIFICATION; + mpi_request->VF_ID = VF_ID; + for (i = 0; i < MPI2_EVENT_NOTIFY_EVENTMASK_WORDS; i++) + mpi_request->EventMasks[i] = + le32_to_cpu(ioc->event_masks[i]); + mpt2sas_base_put_smid_default(ioc, smid, VF_ID); + timeleft = wait_for_completion_timeout(&ioc->base_cmds.done, 30*HZ); + if (!(ioc->base_cmds.status & MPT2_CMD_COMPLETE)) { + printk(MPT2SAS_ERR_FMT "%s: timeout\n", + ioc->name, __func__); + _debug_dump_mf(mpi_request, + sizeof(Mpi2EventNotificationRequest_t)/4); + if (ioc->base_cmds.status & MPT2_CMD_RESET) + r = -EFAULT; + else + r = -ETIME; + } else + dinitprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s: complete\n", + ioc->name, __func__)); + ioc->base_cmds.status = MPT2_CMD_NOT_USED; + return r; +} + +/** + * mpt2sas_base_validate_event_type - validating event types + * @ioc: per adapter object + * @event: firmware event + * + * This will turn on firmware event notification when application + * ask for that event. We don't mask events that are already enabled. + */ +void +mpt2sas_base_validate_event_type(struct MPT2SAS_ADAPTER *ioc, u32 *event_type) +{ + int i, j; + u32 event_mask, desired_event; + u8 send_update_to_fw; + + for (i = 0, send_update_to_fw = 0; i < + MPI2_EVENT_NOTIFY_EVENTMASK_WORDS; i++) { + event_mask = ~event_type[i]; + desired_event = 1; + for (j = 0; j < 32; j++) { + if (!(event_mask & desired_event) && + (ioc->event_masks[i] & desired_event)) { + ioc->event_masks[i] &= ~desired_event; + send_update_to_fw = 1; + } + desired_event = (desired_event << 1); + } + } + + if (!send_update_to_fw) + return; + + mutex_lock(&ioc->base_cmds.mutex); + _base_event_notification(ioc, 0, CAN_SLEEP); + mutex_unlock(&ioc->base_cmds.mutex); +} + +/** + * _base_diag_reset - the "big hammer" start of day reset + * @ioc: per adapter object + * @sleep_flag: CAN_SLEEP or NO_SLEEP + * + * Returns 0 for success, non-zero for failure. + */ +static int +_base_diag_reset(struct MPT2SAS_ADAPTER *ioc, int sleep_flag) +{ + u32 host_diagnostic; + u32 ioc_state; + u32 count; + u32 hcb_size; + + printk(MPT2SAS_INFO_FMT "sending diag reset !!\n", ioc->name); + + _base_save_msix_table(ioc); + + drsprintk(ioc, printk(MPT2SAS_DEBUG_FMT "clear interrupts\n", + ioc->name)); + writel(0, &ioc->chip->HostInterruptStatus); + + count = 0; + do { + /* Write magic sequence to WriteSequence register + * Loop until in diagnostic mode + */ + drsprintk(ioc, printk(MPT2SAS_DEBUG_FMT "write magic " + "sequence\n", ioc->name)); + writel(MPI2_WRSEQ_FLUSH_KEY_VALUE, &ioc->chip->WriteSequence); + writel(MPI2_WRSEQ_1ST_KEY_VALUE, &ioc->chip->WriteSequence); + writel(MPI2_WRSEQ_2ND_KEY_VALUE, &ioc->chip->WriteSequence); + writel(MPI2_WRSEQ_3RD_KEY_VALUE, &ioc->chip->WriteSequence); + writel(MPI2_WRSEQ_4TH_KEY_VALUE, &ioc->chip->WriteSequence); + writel(MPI2_WRSEQ_5TH_KEY_VALUE, &ioc->chip->WriteSequence); + writel(MPI2_WRSEQ_6TH_KEY_VALUE, &ioc->chip->WriteSequence); + + /* wait 100 msec */ + if (sleep_flag == CAN_SLEEP) + msleep(100); + else + mdelay(100); + + if (count++ > 20) + goto out; + + host_diagnostic = readl(&ioc->chip->HostDiagnostic); + drsprintk(ioc, printk(MPT2SAS_DEBUG_FMT "wrote magic " + "sequence: count(%d), host_diagnostic(0x%08x)\n", + ioc->name, count, host_diagnostic)); + + } while ((host_diagnostic & MPI2_DIAG_DIAG_WRITE_ENABLE) == 0); + + hcb_size = readl(&ioc->chip->HCBSize); + + drsprintk(ioc, printk(MPT2SAS_DEBUG_FMT "diag reset: issued\n", + ioc->name)); + writel(host_diagnostic | MPI2_DIAG_RESET_ADAPTER, + &ioc->chip->HostDiagnostic); + + /* don't access any registers for 50 milliseconds */ + msleep(50); + + /* 300 second max wait */ + for (count = 0; count < 3000000 ; count++) { + + host_diagnostic = readl(&ioc->chip->HostDiagnostic); + + if (host_diagnostic == 0xFFFFFFFF) + goto out; + if (!(host_diagnostic & MPI2_DIAG_RESET_ADAPTER)) + break; + + /* wait 100 msec */ + if (sleep_flag == CAN_SLEEP) + msleep(1); + else + mdelay(1); + } + + if (host_diagnostic & MPI2_DIAG_HCB_MODE) { + + drsprintk(ioc, printk(MPT2SAS_DEBUG_FMT "restart the adapter " + "assuming the HCB Address points to good F/W\n", + ioc->name)); + host_diagnostic &= ~MPI2_DIAG_BOOT_DEVICE_SELECT_MASK; + host_diagnostic |= MPI2_DIAG_BOOT_DEVICE_SELECT_HCDW; + writel(host_diagnostic, &ioc->chip->HostDiagnostic); + + drsprintk(ioc, printk(MPT2SAS_DEBUG_FMT + "re-enable the HCDW\n", ioc->name)); + writel(hcb_size | MPI2_HCB_SIZE_HCB_ENABLE, + &ioc->chip->HCBSize); + } + + drsprintk(ioc, printk(MPT2SAS_DEBUG_FMT "restart the adapter\n", + ioc->name)); + writel(host_diagnostic & ~MPI2_DIAG_HOLD_IOC_RESET, + &ioc->chip->HostDiagnostic); + + drsprintk(ioc, printk(MPT2SAS_DEBUG_FMT "disable writes to the " + "diagnostic register\n", ioc->name)); + writel(MPI2_WRSEQ_FLUSH_KEY_VALUE, &ioc->chip->WriteSequence); + + drsprintk(ioc, printk(MPT2SAS_DEBUG_FMT "Wait for FW to go to the " + "READY state\n", ioc->name)); + ioc_state = _base_wait_on_iocstate(ioc, MPI2_IOC_STATE_READY, 20, + sleep_flag); + if (ioc_state) { + printk(MPT2SAS_ERR_FMT "%s: failed going to ready state " + " (ioc_state=0x%x)\n", ioc->name, __func__, ioc_state); + goto out; + } + + _base_restore_msix_table(ioc); + printk(MPT2SAS_INFO_FMT "diag reset: SUCCESS\n", ioc->name); + return 0; + + out: + printk(MPT2SAS_ERR_FMT "diag reset: FAILED\n", ioc->name); + return -EFAULT; +} + +/** + * _base_make_ioc_ready - put controller in READY state + * @ioc: per adapter object + * @sleep_flag: CAN_SLEEP or NO_SLEEP + * @type: FORCE_BIG_HAMMER or SOFT_RESET + * + * Returns 0 for success, non-zero for failure. + */ +static int +_base_make_ioc_ready(struct MPT2SAS_ADAPTER *ioc, int sleep_flag, + enum reset_type type) +{ + u32 ioc_state; + + dinitprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s\n", ioc->name, + __func__)); + + ioc_state = mpt2sas_base_get_iocstate(ioc, 0); + dhsprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s: ioc_state(0x%08x)\n", + ioc->name, __func__, ioc_state)); + + if ((ioc_state & MPI2_IOC_STATE_MASK) == MPI2_IOC_STATE_READY) + return 0; + + if (ioc_state & MPI2_DOORBELL_USED) { + dhsprintk(ioc, printk(MPT2SAS_DEBUG_FMT "unexpected doorbell " + "active!\n", ioc->name)); + goto issue_diag_reset; + } + + if ((ioc_state & MPI2_IOC_STATE_MASK) == MPI2_IOC_STATE_FAULT) { + mpt2sas_base_fault_info(ioc, ioc_state & + MPI2_DOORBELL_DATA_MASK); + goto issue_diag_reset; + } + + if (type == FORCE_BIG_HAMMER) + goto issue_diag_reset; + + if ((ioc_state & MPI2_IOC_STATE_MASK) == MPI2_IOC_STATE_OPERATIONAL) + if (!(_base_send_ioc_reset(ioc, + MPI2_FUNCTION_IOC_MESSAGE_UNIT_RESET, 15, CAN_SLEEP))) + return 0; + + issue_diag_reset: + return _base_diag_reset(ioc, CAN_SLEEP); +} + +/** + * _base_make_ioc_operational - put controller in OPERATIONAL state + * @ioc: per adapter object + * @VF_ID: virtual function id + * @sleep_flag: CAN_SLEEP or NO_SLEEP + * + * Returns 0 for success, non-zero for failure. + */ +static int +_base_make_ioc_operational(struct MPT2SAS_ADAPTER *ioc, u8 VF_ID, + int sleep_flag) +{ + int r, i; + unsigned long flags; + u32 reply_address; + + dinitprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s\n", ioc->name, + __func__)); + + /* initialize the scsi lookup free list */ + spin_lock_irqsave(&ioc->scsi_lookup_lock, flags); + INIT_LIST_HEAD(&ioc->free_list); + for (i = 0; i < ioc->request_depth; i++) { + ioc->scsi_lookup[i].cb_idx = 0xFF; + list_add_tail(&ioc->scsi_lookup[i].tracker_list, + &ioc->free_list); + } + spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags); + + /* initialize Reply Free Queue */ + for (i = 0, reply_address = (u32)ioc->reply_dma ; + i < ioc->reply_free_queue_depth ; i++, reply_address += + ioc->reply_sz) + ioc->reply_free[i] = cpu_to_le32(reply_address); + + /* initialize Reply Post Free Queue */ + for (i = 0; i < ioc->reply_post_queue_depth; i++) + ioc->reply_post_free[i].Words = ~0ULL; + + r = _base_send_ioc_init(ioc, VF_ID, sleep_flag); + if (r) + return r; + + /* initialize the index's */ + ioc->reply_free_host_index = ioc->reply_free_queue_depth - 1; + ioc->reply_post_host_index = 0; + writel(ioc->reply_free_host_index, &ioc->chip->ReplyFreeHostIndex); + writel(0, &ioc->chip->ReplyPostHostIndex); + + _base_unmask_interrupts(ioc); + r = _base_event_notification(ioc, VF_ID, sleep_flag); + if (r) + return r; + + if (sleep_flag == CAN_SLEEP) + _base_static_config_pages(ioc); + + r = _base_send_port_enable(ioc, VF_ID, sleep_flag); + if (r) + return r; + + return r; +} + +/** + * mpt2sas_base_free_resources - free resources controller resources (io/irq/memap) + * @ioc: per adapter object + * + * Return nothing. + */ +void +mpt2sas_base_free_resources(struct MPT2SAS_ADAPTER *ioc) +{ + struct pci_dev *pdev = ioc->pdev; + + dexitprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s\n", ioc->name, + __func__)); + + _base_mask_interrupts(ioc); + _base_make_ioc_ready(ioc, CAN_SLEEP, SOFT_RESET); + if (ioc->pci_irq) { + synchronize_irq(pdev->irq); + free_irq(ioc->pci_irq, ioc); + } + _base_disable_msix(ioc); + if (ioc->chip_phys) + iounmap(ioc->chip); + ioc->pci_irq = -1; + ioc->chip_phys = 0; + pci_release_selected_regions(ioc->pdev, ioc->bars); + pci_disable_device(pdev); + pci_set_drvdata(pdev, NULL); + return; +} + +/** + * mpt2sas_base_attach - attach controller instance + * @ioc: per adapter object + * + * Returns 0 for success, non-zero for failure. + */ +int +mpt2sas_base_attach(struct MPT2SAS_ADAPTER *ioc) +{ + int r, i; + unsigned long flags; + + dinitprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s\n", ioc->name, + __func__)); + + r = mpt2sas_base_map_resources(ioc); + if (r) + return r; + + r = _base_make_ioc_ready(ioc, CAN_SLEEP, SOFT_RESET); + if (r) + goto out_free_resources; + + r = _base_get_ioc_facts(ioc, CAN_SLEEP); + if (r) + goto out_free_resources; + + r = _base_allocate_memory_pools(ioc, CAN_SLEEP); + if (r) + goto out_free_resources; + + init_waitqueue_head(&ioc->reset_wq); + + /* base internal command bits */ + mutex_init(&ioc->base_cmds.mutex); + init_completion(&ioc->base_cmds.done); + ioc->base_cmds.reply = kzalloc(ioc->reply_sz, GFP_KERNEL); + ioc->base_cmds.status = MPT2_CMD_NOT_USED; + + /* transport internal command bits */ + ioc->transport_cmds.reply = kzalloc(ioc->reply_sz, GFP_KERNEL); + ioc->transport_cmds.status = MPT2_CMD_NOT_USED; + mutex_init(&ioc->transport_cmds.mutex); + init_completion(&ioc->transport_cmds.done); + + /* task management internal command bits */ + ioc->tm_cmds.reply = kzalloc(ioc->reply_sz, GFP_KERNEL); + ioc->tm_cmds.status = MPT2_CMD_NOT_USED; + mutex_init(&ioc->tm_cmds.mutex); + init_completion(&ioc->tm_cmds.done); + + /* config page internal command bits */ + ioc->config_cmds.reply = kzalloc(ioc->reply_sz, GFP_KERNEL); + ioc->config_cmds.status = MPT2_CMD_NOT_USED; + mutex_init(&ioc->config_cmds.mutex); + init_completion(&ioc->config_cmds.done); + + /* ctl module internal command bits */ + ioc->ctl_cmds.reply = kzalloc(ioc->reply_sz, GFP_KERNEL); + ioc->ctl_cmds.status = MPT2_CMD_NOT_USED; + mutex_init(&ioc->ctl_cmds.mutex); + init_completion(&ioc->ctl_cmds.done); + + for (i = 0; i < MPI2_EVENT_NOTIFY_EVENTMASK_WORDS; i++) + ioc->event_masks[i] = -1; + + /* here we enable the events we care about */ + _base_unmask_events(ioc, MPI2_EVENT_SAS_DISCOVERY); + _base_unmask_events(ioc, MPI2_EVENT_SAS_BROADCAST_PRIMITIVE); + _base_unmask_events(ioc, MPI2_EVENT_SAS_TOPOLOGY_CHANGE_LIST); + _base_unmask_events(ioc, MPI2_EVENT_SAS_DEVICE_STATUS_CHANGE); + _base_unmask_events(ioc, MPI2_EVENT_SAS_ENCL_DEVICE_STATUS_CHANGE); + _base_unmask_events(ioc, MPI2_EVENT_IR_CONFIGURATION_CHANGE_LIST); + _base_unmask_events(ioc, MPI2_EVENT_IR_VOLUME); + _base_unmask_events(ioc, MPI2_EVENT_IR_PHYSICAL_DISK); + _base_unmask_events(ioc, MPI2_EVENT_IR_OPERATION_STATUS); + _base_unmask_events(ioc, MPI2_EVENT_TASK_SET_FULL); + _base_unmask_events(ioc, MPI2_EVENT_LOG_ENTRY_ADDED); + + ioc->pfacts = kcalloc(ioc->facts.NumberOfPorts, + sizeof(Mpi2PortFactsReply_t), GFP_KERNEL); + if (!ioc->pfacts) + goto out_free_resources; + + for (i = 0 ; i < ioc->facts.NumberOfPorts; i++) { + r = _base_get_port_facts(ioc, i, CAN_SLEEP); + if (r) + goto out_free_resources; + } + r = _base_make_ioc_operational(ioc, 0, CAN_SLEEP); + if (r) + goto out_free_resources; + + /* initialize fault polling */ + INIT_DELAYED_WORK(&ioc->fault_reset_work, _base_fault_reset_work); + snprintf(ioc->fault_reset_work_q_name, + sizeof(ioc->fault_reset_work_q_name), "poll_%d_status", ioc->id); + ioc->fault_reset_work_q = + create_singlethread_workqueue(ioc->fault_reset_work_q_name); + if (!ioc->fault_reset_work_q) { + printk(MPT2SAS_ERR_FMT "%s: failed (line=%d)\n", + ioc->name, __func__, __LINE__); + goto out_free_resources; + } + spin_lock_irqsave(&ioc->ioc_reset_in_progress_lock, flags); + if (ioc->fault_reset_work_q) + queue_delayed_work(ioc->fault_reset_work_q, + &ioc->fault_reset_work, + msecs_to_jiffies(FAULT_POLLING_INTERVAL)); + spin_unlock_irqrestore(&ioc->ioc_reset_in_progress_lock, flags); + return 0; + + out_free_resources: + + ioc->remove_host = 1; + mpt2sas_base_free_resources(ioc); + _base_release_memory_pools(ioc); + kfree(ioc->tm_cmds.reply); + kfree(ioc->transport_cmds.reply); + kfree(ioc->config_cmds.reply); + kfree(ioc->base_cmds.reply); + kfree(ioc->ctl_cmds.reply); + kfree(ioc->pfacts); + ioc->ctl_cmds.reply = NULL; + ioc->base_cmds.reply = NULL; + ioc->tm_cmds.reply = NULL; + ioc->transport_cmds.reply = NULL; + ioc->config_cmds.reply = NULL; + ioc->pfacts = NULL; + return r; +} + + +/** + * mpt2sas_base_detach - remove controller instance + * @ioc: per adapter object + * + * Return nothing. + */ +void +mpt2sas_base_detach(struct MPT2SAS_ADAPTER *ioc) +{ + unsigned long flags; + struct workqueue_struct *wq; + + dexitprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s\n", ioc->name, + __func__)); + + spin_lock_irqsave(&ioc->ioc_reset_in_progress_lock, flags); + wq = ioc->fault_reset_work_q; + ioc->fault_reset_work_q = NULL; + spin_unlock_irqrestore(&ioc->ioc_reset_in_progress_lock, flags); + if (!cancel_delayed_work(&ioc->fault_reset_work)) + flush_workqueue(wq); + destroy_workqueue(wq); + + mpt2sas_base_free_resources(ioc); + _base_release_memory_pools(ioc); + kfree(ioc->pfacts); + kfree(ioc->ctl_cmds.reply); + kfree(ioc->base_cmds.reply); + kfree(ioc->tm_cmds.reply); + kfree(ioc->transport_cmds.reply); + kfree(ioc->config_cmds.reply); +} + +/** + * _base_reset_handler - reset callback handler (for base) + * @ioc: per adapter object + * @reset_phase: phase + * + * The handler for doing any required cleanup or initialization. + * + * The reset phase can be MPT2_IOC_PRE_RESET, MPT2_IOC_AFTER_RESET, + * MPT2_IOC_DONE_RESET + * + * Return nothing. + */ +static void +_base_reset_handler(struct MPT2SAS_ADAPTER *ioc, int reset_phase) +{ + switch (reset_phase) { + case MPT2_IOC_PRE_RESET: + dtmprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s: " + "MPT2_IOC_PRE_RESET\n", ioc->name, __func__)); + break; + case MPT2_IOC_AFTER_RESET: + dtmprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s: " + "MPT2_IOC_AFTER_RESET\n", ioc->name, __func__)); + if (ioc->transport_cmds.status & MPT2_CMD_PENDING) { + ioc->transport_cmds.status |= MPT2_CMD_RESET; + mpt2sas_base_free_smid(ioc, ioc->transport_cmds.smid); + complete(&ioc->transport_cmds.done); + } + if (ioc->base_cmds.status & MPT2_CMD_PENDING) { + ioc->base_cmds.status |= MPT2_CMD_RESET; + mpt2sas_base_free_smid(ioc, ioc->base_cmds.smid); + complete(&ioc->base_cmds.done); + } + if (ioc->config_cmds.status & MPT2_CMD_PENDING) { + ioc->config_cmds.status |= MPT2_CMD_RESET; + mpt2sas_base_free_smid(ioc, ioc->config_cmds.smid); + complete(&ioc->config_cmds.done); + } + break; + case MPT2_IOC_DONE_RESET: + dtmprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s: " + "MPT2_IOC_DONE_RESET\n", ioc->name, __func__)); + break; + } + mpt2sas_scsih_reset_handler(ioc, reset_phase); + mpt2sas_ctl_reset_handler(ioc, reset_phase); +} + +/** + * _wait_for_commands_to_complete - reset controller + * @ioc: Pointer to MPT_ADAPTER structure + * @sleep_flag: CAN_SLEEP or NO_SLEEP + * + * This function waiting(3s) for all pending commands to complete + * prior to putting controller in reset. + */ +static void +_wait_for_commands_to_complete(struct MPT2SAS_ADAPTER *ioc, int sleep_flag) +{ + u32 ioc_state; + unsigned long flags; + u16 i; + + ioc->pending_io_count = 0; + if (sleep_flag != CAN_SLEEP) + return; + + ioc_state = mpt2sas_base_get_iocstate(ioc, 0); + if ((ioc_state & MPI2_IOC_STATE_MASK) != MPI2_IOC_STATE_OPERATIONAL) + return; + + /* pending command count */ + spin_lock_irqsave(&ioc->scsi_lookup_lock, flags); + for (i = 0; i < ioc->request_depth; i++) + if (ioc->scsi_lookup[i].cb_idx != 0xFF) + ioc->pending_io_count++; + spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags); + + if (!ioc->pending_io_count) + return; + + /* wait for pending commands to complete */ + wait_event_timeout(ioc->reset_wq, ioc->pending_io_count == 0, 3 * HZ); +} + +/** + * mpt2sas_base_hard_reset_handler - reset controller + * @ioc: Pointer to MPT_ADAPTER structure + * @sleep_flag: CAN_SLEEP or NO_SLEEP + * @type: FORCE_BIG_HAMMER or SOFT_RESET + * + * Returns 0 for success, non-zero for failure. + */ +int +mpt2sas_base_hard_reset_handler(struct MPT2SAS_ADAPTER *ioc, int sleep_flag, + enum reset_type type) +{ + int r, i; + unsigned long flags; + + dtmprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s: enter\n", ioc->name, + __func__)); + + spin_lock_irqsave(&ioc->ioc_reset_in_progress_lock, flags); + if (ioc->ioc_reset_in_progress) { + spin_unlock_irqrestore(&ioc->ioc_reset_in_progress_lock, flags); + printk(MPT2SAS_ERR_FMT "%s: busy\n", + ioc->name, __func__); + return -EBUSY; + } + ioc->ioc_reset_in_progress = 1; + ioc->shost_recovery = 1; + if (ioc->shost->shost_state == SHOST_RUNNING) { + /* set back to SHOST_RUNNING in mpt2sas_scsih.c */ + scsi_host_set_state(ioc->shost, SHOST_RECOVERY); + printk(MPT2SAS_INFO_FMT "putting controller into " + "SHOST_RECOVERY\n", ioc->name); + } + spin_unlock_irqrestore(&ioc->ioc_reset_in_progress_lock, flags); + + _base_reset_handler(ioc, MPT2_IOC_PRE_RESET); + _wait_for_commands_to_complete(ioc, sleep_flag); + _base_mask_interrupts(ioc); + r = _base_make_ioc_ready(ioc, sleep_flag, type); + if (r) + goto out; + _base_reset_handler(ioc, MPT2_IOC_AFTER_RESET); + for (i = 0 ; i < ioc->facts.NumberOfPorts; i++) + r = _base_make_ioc_operational(ioc, ioc->pfacts[i].VF_ID, + sleep_flag); + if (!r) + _base_reset_handler(ioc, MPT2_IOC_DONE_RESET); + out: + dtmprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s: %s\n", + ioc->name, __func__, ((r == 0) ? "SUCCESS" : "FAILED"))); + + spin_lock_irqsave(&ioc->ioc_reset_in_progress_lock, flags); + ioc->ioc_reset_in_progress = 0; + spin_unlock_irqrestore(&ioc->ioc_reset_in_progress_lock, flags); + return r; +} diff --git a/drivers/scsi/mpt2sas/mpt2sas_base.h b/drivers/scsi/mpt2sas/mpt2sas_base.h new file mode 100644 index 0000000..11fc17f --- /dev/null +++ b/drivers/scsi/mpt2sas/mpt2sas_base.h @@ -0,0 +1,779 @@ +/* + * This is the Fusion MPT base driver providing common API layer interface + * for access to MPT (Message Passing Technology) firmware. + * + * This code is based on drivers/scsi/mpt2sas/mpt2_base.h + * Copyright (C) 2007-2008 LSI Corporation + * (mailto:DL-MPTFusionLinux@lsi.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * NO WARRANTY + * THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR + * CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT + * LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT, + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is + * solely responsible for determining the appropriateness of using and + * distributing the Program and assumes all risks associated with its + * exercise of rights under this Agreement, including but not limited to + * the risks and costs of program errors, damage to or loss of data, + * programs or equipment, and unavailability or interruption of operations. + + * DISCLAIMER OF LIABILITY + * NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR + * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE + * USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED + * HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES + + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, + * USA. + */ + +#ifndef MPT2SAS_BASE_H_INCLUDED +#define MPT2SAS_BASE_H_INCLUDED + +#include "mpi/mpi2_type.h" +#include "mpi/mpi2.h" +#include "mpi/mpi2_ioc.h" +#include "mpi/mpi2_cnfg.h" +#include "mpi/mpi2_init.h" +#include "mpi/mpi2_raid.h" +#include "mpi/mpi2_tool.h" +#include "mpi/mpi2_sas.h" + +#include +#include +#include +#include +#include +#include +#include + +#include "mpt2sas_debug.h" + +/* driver versioning info */ +#define MPT2SAS_DRIVER_NAME "mpt2sas" +#define MPT2SAS_AUTHOR "LSI Corporation " +#define MPT2SAS_DESCRIPTION "LSI MPT Fusion SAS 2.0 Device Driver" +#define MPT2SAS_DRIVER_VERSION "00.100.11.15" +#define MPT2SAS_MAJOR_VERSION 00 +#define MPT2SAS_MINOR_VERSION 100 +#define MPT2SAS_BUILD_VERSION 11 +#define MPT2SAS_RELEASE_VERSION 15 + +/* + * Set MPT2SAS_SG_DEPTH value based on user input. + */ +#ifdef CONFIG_SCSI_MPT2SAS_MAX_SGE +#if CONFIG_SCSI_MPT2SAS_MAX_SGE < 16 +#define MPT2SAS_SG_DEPTH 16 +#elif CONFIG_SCSI_MPT2SAS_MAX_SGE > 128 +#define MPT2SAS_SG_DEPTH 128 +#else +#define MPT2SAS_SG_DEPTH CONFIG_SCSI_MPT2SAS_MAX_SGE +#endif +#else +#define MPT2SAS_SG_DEPTH 128 /* MAX_HW_SEGMENTS */ +#endif + + +/* + * Generic Defines + */ +#define MPT2SAS_SATA_QUEUE_DEPTH 32 +#define MPT2SAS_SAS_QUEUE_DEPTH 254 +#define MPT2SAS_RAID_QUEUE_DEPTH 128 + +#define MPT_NAME_LENGTH 32 /* generic length of strings */ +#define MPT_STRING_LENGTH 64 + +#define MPT_MAX_CALLBACKS 16 + +#define CAN_SLEEP 1 +#define NO_SLEEP 0 + +#define INTERNAL_CMDS_COUNT 10 /* reserved cmds */ + +#define MPI2_HIM_MASK 0xFFFFFFFF /* mask every bit*/ + +#define MPT2SAS_INVALID_DEVICE_HANDLE 0xFFFF + + +/* + * reset phases + */ +#define MPT2_IOC_PRE_RESET 1 /* prior to host reset */ +#define MPT2_IOC_AFTER_RESET 2 /* just after host reset */ +#define MPT2_IOC_DONE_RESET 3 /* links re-initialized */ + +/* + * logging format + */ +#define MPT2SAS_FMT "%s: " +#define MPT2SAS_DEBUG_FMT KERN_DEBUG MPT2SAS_FMT +#define MPT2SAS_INFO_FMT KERN_INFO MPT2SAS_FMT +#define MPT2SAS_NOTE_FMT KERN_NOTICE MPT2SAS_FMT +#define MPT2SAS_WARN_FMT KERN_WARNING MPT2SAS_FMT +#define MPT2SAS_ERR_FMT KERN_ERR MPT2SAS_FMT + +/* + * per target private data + */ +#define MPT_TARGET_FLAGS_RAID_COMPONENT 0x01 +#define MPT_TARGET_FLAGS_VOLUME 0x02 +#define MPT_TARGET_FLAGS_DELETED 0x04 + +/** + * struct MPT2SAS_TARGET - starget private hostdata + * @starget: starget object + * @sas_address: target sas address + * @handle: device handle + * @num_luns: number luns + * @flags: MPT_TARGET_FLAGS_XXX flags + * @deleted: target flaged for deletion + * @tm_busy: target is busy with TM request. + */ +struct MPT2SAS_TARGET { + struct scsi_target *starget; + u64 sas_address; + u16 handle; + int num_luns; + u32 flags; + u8 deleted; + u8 tm_busy; +}; + +/* + * per device private data + */ +#define MPT_DEVICE_FLAGS_INIT 0x01 +#define MPT_DEVICE_TLR_ON 0x02 + +/** + * struct MPT2SAS_DEVICE - sdev private hostdata + * @sas_target: starget private hostdata + * @lun: lun number + * @flags: MPT_DEVICE_XXX flags + * @configured_lun: lun is configured + * @block: device is in SDEV_BLOCK state + * @tlr_snoop_check: flag used in determining whether to disable TLR + */ +struct MPT2SAS_DEVICE { + struct MPT2SAS_TARGET *sas_target; + unsigned int lun; + u32 flags; + u8 configured_lun; + u8 block; + u8 tlr_snoop_check; +}; + +#define MPT2_CMD_NOT_USED 0x8000 /* free */ +#define MPT2_CMD_COMPLETE 0x0001 /* completed */ +#define MPT2_CMD_PENDING 0x0002 /* pending */ +#define MPT2_CMD_REPLY_VALID 0x0004 /* reply is valid */ +#define MPT2_CMD_RESET 0x0008 /* host reset dropped the command */ + +/** + * struct _internal_cmd - internal commands struct + * @mutex: mutex + * @done: completion + * @reply: reply message pointer + * @status: MPT2_CMD_XXX status + * @smid: system message id + */ +struct _internal_cmd { + struct mutex mutex; + struct completion done; + void *reply; + u16 status; + u16 smid; +}; + +/* + * SAS Topology Structures + */ + +/** + * struct _sas_device - attached device information + * @list: sas device list + * @starget: starget object + * @sas_address: device sas address + * @device_name: retrieved from the SAS IDENTIFY frame. + * @handle: device handle + * @parent_handle: handle to parent device + * @enclosure_handle: enclosure handle + * @enclosure_logical_id: enclosure logical identifier + * @volume_handle: volume handle (valid when hidden raid member) + * @volume_wwid: volume unique identifier + * @device_info: bitfield provides detailed info about the device + * @id: target id + * @channel: target channel + * @slot: number number + * @hidden_raid_component: set to 1 when this is a raid member + * @responding: used in _scsih_sas_device_mark_responding + */ +struct _sas_device { + struct list_head list; + struct scsi_target *starget; + u64 sas_address; + u64 device_name; + u16 handle; + u16 parent_handle; + u16 enclosure_handle; + u64 enclosure_logical_id; + u16 volume_handle; + u64 volume_wwid; + u32 device_info; + int id; + int channel; + u16 slot; + u8 hidden_raid_component; + u8 responding; +}; + +/** + * struct _raid_device - raid volume link list + * @list: sas device list + * @starget: starget object + * @sdev: scsi device struct (volumes are single lun) + * @wwid: unique identifier for the volume + * @handle: device handle + * @id: target id + * @channel: target channel + * @volume_type: the raid level + * @device_info: bitfield provides detailed info about the hidden components + * @num_pds: number of hidden raid components + * @responding: used in _scsih_raid_device_mark_responding + */ +struct _raid_device { + struct list_head list; + struct scsi_target *starget; + struct scsi_device *sdev; + u64 wwid; + u16 handle; + int id; + int channel; + u8 volume_type; + u32 device_info; + u8 num_pds; + u8 responding; +}; + +/** + * struct _boot_device - boot device info + * @is_raid: flag to indicate whether this is volume + * @device: holds pointer for either struct _sas_device or + * struct _raid_device + */ +struct _boot_device { + u8 is_raid; + void *device; +}; + +/** + * struct _sas_port - wide/narrow sas port information + * @port_list: list of ports belonging to expander + * @handle: device handle for this port + * @sas_address: sas address of this port + * @num_phys: number of phys belonging to this port + * @remote_identify: attached device identification + * @rphy: sas transport rphy object + * @port: sas transport wide/narrow port object + * @phy_list: _sas_phy list objects belonging to this port + */ +struct _sas_port { + struct list_head port_list; + u16 handle; + u64 sas_address; + u8 num_phys; + struct sas_identify remote_identify; + struct sas_rphy *rphy; + struct sas_port *port; + struct list_head phy_list; +}; + +/** + * struct _sas_phy - phy information + * @port_siblings: list of phys belonging to a port + * @identify: phy identification + * @remote_identify: attached device identification + * @phy: sas transport phy object + * @phy_id: unique phy id + * @handle: device handle for this phy + * @attached_handle: device handle for attached device + */ +struct _sas_phy { + struct list_head port_siblings; + struct sas_identify identify; + struct sas_identify remote_identify; + struct sas_phy *phy; + u8 phy_id; + u16 handle; + u16 attached_handle; +}; + +/** + * struct _sas_node - sas_host/expander information + * @list: list of expanders + * @parent_dev: parent device class + * @num_phys: number phys belonging to this sas_host/expander + * @sas_address: sas address of this sas_host/expander + * @handle: handle for this sas_host/expander + * @parent_handle: parent handle + * @enclosure_handle: handle for this a member of an enclosure + * @device_info: bitwise defining capabilities of this sas_host/expander + * @responding: used in _scsih_expander_device_mark_responding + * @phy: a list of phys that make up this sas_host/expander + * @sas_port_list: list of ports attached to this sas_host/expander + */ +struct _sas_node { + struct list_head list; + struct device *parent_dev; + u8 num_phys; + u64 sas_address; + u16 handle; + u16 parent_handle; + u16 enclosure_handle; + u64 enclosure_logical_id; + u8 responding; + struct _sas_phy *phy; + struct list_head sas_port_list; +}; + +/** + * enum reset_type - reset state + * @FORCE_BIG_HAMMER: issue diagnostic reset + * @SOFT_RESET: issue message_unit_reset, if fails to to big hammer + */ +enum reset_type { + FORCE_BIG_HAMMER, + SOFT_RESET, +}; + +/** + * struct request_tracker - firmware request tracker + * @smid: system message id + * @scmd: scsi request pointer + * @cb_idx: callback index + * @chain_list: list of chains associated to this IO + * @tracker_list: list of free request (ioc->free_list) + */ +struct request_tracker { + u16 smid; + struct scsi_cmnd *scmd; + u8 cb_idx; + struct list_head tracker_list; +}; + +typedef void (*MPT_ADD_SGE)(void *paddr, u32 flags_length, dma_addr_t dma_addr); + +/** + * struct MPT2SAS_ADAPTER - per adapter struct + * @list: ioc_list + * @shost: shost object + * @id: unique adapter id + * @pci_irq: irq number + * @name: generic ioc string + * @tmp_string: tmp string used for logging + * @pdev: pci pdev object + * @chip: memory mapped register space + * @chip_phys: physical addrss prior to mapping + * @pio_chip: I/O mapped register space + * @logging_level: see mpt2sas_debug.h + * @ir_firmware: IR firmware present + * @bars: bitmask of BAR's that must be configured + * @mask_interrupts: ignore interrupt + * @fault_reset_work_q_name: fw fault work queue + * @fault_reset_work_q: "" + * @fault_reset_work: "" + * @firmware_event_name: fw event work queue + * @firmware_event_thread: "" + * @fw_events_off: flag to turn off fw event handling + * @fw_event_lock: + * @fw_event_list: list of fw events + * @aen_event_read_flag: event log was read + * @broadcast_aen_busy: broadcast aen waiting to be serviced + * @ioc_reset_in_progress: host reset in progress + * @ioc_reset_in_progress_lock: + * @ioc_link_reset_in_progress: phy/hard reset in progress + * @ignore_loginfos: ignore loginfos during task managment + * @remove_host: flag for when driver unloads, to avoid sending dev resets + * @wait_for_port_enable_to_complete: + * @msix_enable: flag indicating msix is enabled + * @msix_vector_count: number msix vectors + * @msix_table: virt address to the msix table + * @msix_table_backup: backup msix table + * @scsi_io_cb_idx: shost generated commands + * @tm_cb_idx: task management commands + * @transport_cb_idx: transport internal commands + * @ctl_cb_idx: clt internal commands + * @base_cb_idx: base internal commands + * @config_cb_idx: base internal commands + * @base_cmds: + * @transport_cmds: + * @tm_cmds: + * @ctl_cmds: + * @config_cmds: + * @base_add_sg_single: handler for either 32/64 bit sgl's + * @event_type: bits indicating which events to log + * @event_context: unique id for each logged event + * @event_log: event log pointer + * @event_masks: events that are masked + * @facts: static facts data + * @pfacts: static port facts data + * @manu_pg0: static manufacturing page 0 + * @bios_pg2: static bios page 2 + * @bios_pg3: static bios page 3 + * @ioc_pg8: static ioc page 8 + * @iounit_pg0: static iounit page 0 + * @iounit_pg1: static iounit page 1 + * @sas_hba: sas host object + * @sas_expander_list: expander object list + * @sas_node_lock: + * @sas_device_list: sas device object list + * @sas_device_init_list: sas device object list (used only at init time) + * @sas_device_lock: + * @io_missing_delay: time for IO completed by fw when PDR enabled + * @device_missing_delay: time for device missing by fw when PDR enabled + * @config_page_sz: config page size + * @config_page: reserve memory for config page payload + * @config_page_dma: + * @sge_size: sg element size for either 32/64 bit + * @request_depth: hba request queue depth + * @request_sz: per request frame size + * @request: pool of request frames + * @request_dma: + * @request_dma_sz: + * @scsi_lookup: firmware request tracker list + * @scsi_lookup_lock: + * @free_list: free list of request + * @chain: pool of chains + * @pending_io_count: + * @reset_wq: + * @chain_dma: + * @max_sges_in_main_message: number sg elements in main message + * @max_sges_in_chain_message: number sg elements per chain + * @chains_needed_per_io: max chains per io + * @chain_offset_value_for_main_message: location 1st sg in main + * @chain_depth: total chains allocated + * @sense: pool of sense + * @sense_dma: + * @sense_dma_pool: + * @reply_depth: hba reply queue depth: + * @reply_sz: per reply frame size: + * @reply: pool of replys: + * @reply_dma: + * @reply_dma_pool: + * @reply_free_queue_depth: reply free depth + * @reply_free: pool for reply free queue (32 bit addr) + * @reply_free_dma: + * @reply_free_dma_pool: + * @reply_free_host_index: tail index in pool to insert free replys + * @reply_post_queue_depth: reply post queue depth + * @reply_post_free: pool for reply post (64bit descriptor) + * @reply_post_free_dma: + * @reply_post_free_dma_pool: + * @reply_post_host_index: head index in the pool where FW completes IO + */ +struct MPT2SAS_ADAPTER { + struct list_head list; + struct Scsi_Host *shost; + u8 id; + u32 pci_irq; + char name[MPT_NAME_LENGTH]; + char tmp_string[MPT_STRING_LENGTH]; + struct pci_dev *pdev; + Mpi2SystemInterfaceRegs_t __iomem *chip; + unsigned long chip_phys; + unsigned long pio_chip; + int logging_level; + u8 ir_firmware; + int bars; + u8 mask_interrupts; + + /* fw fault handler */ + char fault_reset_work_q_name[20]; + struct workqueue_struct *fault_reset_work_q; + struct delayed_work fault_reset_work; + + /* fw event handler */ + char firmware_event_name[20]; + struct workqueue_struct *firmware_event_thread; + u8 fw_events_off; + spinlock_t fw_event_lock; + struct list_head fw_event_list; + + /* misc flags */ + int aen_event_read_flag; + u8 broadcast_aen_busy; + u8 ioc_reset_in_progress; + u8 shost_recovery; + spinlock_t ioc_reset_in_progress_lock; + u8 ioc_link_reset_in_progress; + u8 ignore_loginfos; + u8 remove_host; + u8 wait_for_port_enable_to_complete; + + u8 msix_enable; + u16 msix_vector_count; + u32 *msix_table; + u32 *msix_table_backup; + + /* internal commands, callback index */ + u8 scsi_io_cb_idx; + u8 tm_cb_idx; + u8 transport_cb_idx; + u8 ctl_cb_idx; + u8 base_cb_idx; + u8 config_cb_idx; + struct _internal_cmd base_cmds; + struct _internal_cmd transport_cmds; + struct _internal_cmd tm_cmds; + struct _internal_cmd ctl_cmds; + struct _internal_cmd config_cmds; + + MPT_ADD_SGE base_add_sg_single; + + /* event log */ + u32 event_type[MPI2_EVENT_NOTIFY_EVENTMASK_WORDS]; + u32 event_context; + void *event_log; + u32 event_masks[MPI2_EVENT_NOTIFY_EVENTMASK_WORDS]; + + /* static config pages */ + Mpi2IOCFactsReply_t facts; + Mpi2PortFactsReply_t *pfacts; + Mpi2ManufacturingPage0_t manu_pg0; + Mpi2BiosPage2_t bios_pg2; + Mpi2BiosPage3_t bios_pg3; + Mpi2IOCPage8_t ioc_pg8; + Mpi2IOUnitPage0_t iounit_pg0; + Mpi2IOUnitPage1_t iounit_pg1; + + struct _boot_device req_boot_device; + struct _boot_device req_alt_boot_device; + struct _boot_device current_boot_device; + + /* sas hba, expander, and device list */ + struct _sas_node sas_hba; + struct list_head sas_expander_list; + spinlock_t sas_node_lock; + struct list_head sas_device_list; + struct list_head sas_device_init_list; + spinlock_t sas_device_lock; + struct list_head raid_device_list; + spinlock_t raid_device_lock; + u8 io_missing_delay; + u16 device_missing_delay; + int sas_id; + + /* config page */ + u16 config_page_sz; + void *config_page; + dma_addr_t config_page_dma; + + /* request */ + u16 sge_size; + u16 request_depth; + u16 request_sz; + u8 *request; + dma_addr_t request_dma; + u32 request_dma_sz; + struct request_tracker *scsi_lookup; + spinlock_t scsi_lookup_lock; + struct list_head free_list; + int pending_io_count; + wait_queue_head_t reset_wq; + + /* chain */ + u8 *chain; + dma_addr_t chain_dma; + u16 max_sges_in_main_message; + u16 max_sges_in_chain_message; + u16 chains_needed_per_io; + u16 chain_offset_value_for_main_message; + u16 chain_depth; + + /* sense */ + u8 *sense; + dma_addr_t sense_dma; + struct dma_pool *sense_dma_pool; + + /* reply */ + u16 reply_sz; + u8 *reply; + dma_addr_t reply_dma; + struct dma_pool *reply_dma_pool; + + /* reply free queue */ + u16 reply_free_queue_depth; + u32 *reply_free; + dma_addr_t reply_free_dma; + struct dma_pool *reply_free_dma_pool; + u32 reply_free_host_index; + + /* reply post queue */ + u16 reply_post_queue_depth; + Mpi2ReplyDescriptorsUnion_t *reply_post_free; + dma_addr_t reply_post_free_dma; + struct dma_pool *reply_post_free_dma_pool; + u32 reply_post_host_index; + + /* diag buffer support */ + u8 *diag_buffer[MPI2_DIAG_BUF_TYPE_COUNT]; + u32 diag_buffer_sz[MPI2_DIAG_BUF_TYPE_COUNT]; + dma_addr_t diag_buffer_dma[MPI2_DIAG_BUF_TYPE_COUNT]; + u8 diag_buffer_status[MPI2_DIAG_BUF_TYPE_COUNT]; + u32 unique_id[MPI2_DIAG_BUF_TYPE_COUNT]; + u32 product_specific[MPI2_DIAG_BUF_TYPE_COUNT][23]; + u32 diagnostic_flags[MPI2_DIAG_BUF_TYPE_COUNT]; +}; + +typedef void (*MPT_CALLBACK)(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 VF_ID, + u32 reply); + + +/* base shared API */ +extern struct list_head ioc_list; + +int mpt2sas_base_attach(struct MPT2SAS_ADAPTER *ioc); +void mpt2sas_base_detach(struct MPT2SAS_ADAPTER *ioc); +int mpt2sas_base_map_resources(struct MPT2SAS_ADAPTER *ioc); +void mpt2sas_base_free_resources(struct MPT2SAS_ADAPTER *ioc); +int mpt2sas_base_hard_reset_handler(struct MPT2SAS_ADAPTER *ioc, int sleep_flag, + enum reset_type type); + +void *mpt2sas_base_get_msg_frame(struct MPT2SAS_ADAPTER *ioc, u16 smid); +void *mpt2sas_base_get_sense_buffer(struct MPT2SAS_ADAPTER *ioc, u16 smid); +void mpt2sas_base_build_zero_len_sge(struct MPT2SAS_ADAPTER *ioc, void *paddr); +dma_addr_t mpt2sas_base_get_msg_frame_dma(struct MPT2SAS_ADAPTER *ioc, u16 smid); +dma_addr_t mpt2sas_base_get_sense_buffer_dma(struct MPT2SAS_ADAPTER *ioc, u16 smid); + +u16 mpt2sas_base_get_smid(struct MPT2SAS_ADAPTER *ioc, u8 cb_idx); +void mpt2sas_base_free_smid(struct MPT2SAS_ADAPTER *ioc, u16 smid); +void mpt2sas_base_put_smid_scsi_io(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 vf_id, + u16 handle); +void mpt2sas_base_put_smid_hi_priority(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 vf_id); +void mpt2sas_base_put_smid_target_assist(struct MPT2SAS_ADAPTER *ioc, u16 smid, + u8 vf_id, u16 io_index); +void mpt2sas_base_put_smid_default(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 vf_id); +void mpt2sas_base_initialize_callback_handler(void); +u8 mpt2sas_base_register_callback_handler(MPT_CALLBACK cb_func); +void mpt2sas_base_release_callback_handler(u8 cb_idx); + +void mpt2sas_base_done(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 VF_ID, u32 reply); +void *mpt2sas_base_get_reply_virt_addr(struct MPT2SAS_ADAPTER *ioc, u32 phys_addr); + +u32 mpt2sas_base_get_iocstate(struct MPT2SAS_ADAPTER *ioc, int cooked); + +void mpt2sas_base_fault_info(struct MPT2SAS_ADAPTER *ioc , u16 fault_code); +int mpt2sas_base_sas_iounit_control(struct MPT2SAS_ADAPTER *ioc, + Mpi2SasIoUnitControlReply_t *mpi_reply, Mpi2SasIoUnitControlRequest_t + *mpi_request); +int mpt2sas_base_scsi_enclosure_processor(struct MPT2SAS_ADAPTER *ioc, + Mpi2SepReply_t *mpi_reply, Mpi2SepRequest_t *mpi_request); +void mpt2sas_base_validate_event_type(struct MPT2SAS_ADAPTER *ioc, u32 *event_type); + +/* scsih shared API */ +void mpt2sas_scsih_issue_tm(struct MPT2SAS_ADAPTER *ioc, u16 handle, uint lun, + u8 type, u16 smid_task, ulong timeout); +void mpt2sas_scsih_set_tm_flag(struct MPT2SAS_ADAPTER *ioc, u16 handle); +void mpt2sas_scsih_clear_tm_flag(struct MPT2SAS_ADAPTER *ioc, u16 handle); +struct _sas_node *mpt2sas_scsih_expander_find_by_handle(struct MPT2SAS_ADAPTER *ioc, + u16 handle); +struct _sas_node *mpt2sas_scsih_expander_find_by_sas_address(struct MPT2SAS_ADAPTER + *ioc, u64 sas_address); +struct _sas_device *mpt2sas_scsih_sas_device_find_by_sas_address( + struct MPT2SAS_ADAPTER *ioc, u64 sas_address); + +void mpt2sas_scsih_event_callback(struct MPT2SAS_ADAPTER *ioc, u8 VF_ID, u32 reply); +void mpt2sas_scsih_reset_handler(struct MPT2SAS_ADAPTER *ioc, int reset_phase); + +/* config shared API */ +void mpt2sas_config_done(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 VF_ID, u32 reply); +int mpt2sas_config_get_number_hba_phys(struct MPT2SAS_ADAPTER *ioc, u8 *num_phys); +int mpt2sas_config_get_manufacturing_pg0(struct MPT2SAS_ADAPTER *ioc, + Mpi2ConfigReply_t *mpi_reply, Mpi2ManufacturingPage0_t *config_page); +int mpt2sas_config_get_bios_pg2(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t + *mpi_reply, Mpi2BiosPage2_t *config_page); +int mpt2sas_config_get_bios_pg3(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t + *mpi_reply, Mpi2BiosPage3_t *config_page); +int mpt2sas_config_get_iounit_pg0(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t + *mpi_reply, Mpi2IOUnitPage0_t *config_page); +int mpt2sas_config_get_sas_device_pg0(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t + *mpi_reply, Mpi2SasDevicePage0_t *config_page, u32 form, u32 handle); +int mpt2sas_config_get_sas_device_pg1(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t + *mpi_reply, Mpi2SasDevicePage1_t *config_page, u32 form, u32 handle); +int mpt2sas_config_get_sas_iounit_pg0(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t + *mpi_reply, Mpi2SasIOUnitPage0_t *config_page, u16 sz); +int mpt2sas_config_get_iounit_pg1(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t + *mpi_reply, Mpi2IOUnitPage1_t *config_page); +int mpt2sas_config_set_iounit_pg1(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t + *mpi_reply, Mpi2IOUnitPage1_t config_page); +int mpt2sas_config_get_sas_iounit_pg1(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t + *mpi_reply, Mpi2SasIOUnitPage1_t *config_page, u16 sz); +int mpt2sas_config_get_ioc_pg8(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t + *mpi_reply, Mpi2IOCPage8_t *config_page); +int mpt2sas_config_get_expander_pg0(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t + *mpi_reply, Mpi2ExpanderPage0_t *config_page, u32 form, u32 handle); +int mpt2sas_config_get_expander_pg1(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t + *mpi_reply, Mpi2ExpanderPage1_t *config_page, u32 phy_number, u16 handle); +int mpt2sas_config_get_enclosure_pg0(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t + *mpi_reply, Mpi2SasEnclosurePage0_t *config_page, u32 form, u32 handle); +int mpt2sas_config_get_phy_pg0(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t + *mpi_reply, Mpi2SasPhyPage0_t *config_page, u32 phy_number); +int mpt2sas_config_get_phy_pg1(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t + *mpi_reply, Mpi2SasPhyPage1_t *config_page, u32 phy_number); +int mpt2sas_config_get_raid_volume_pg1(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t + *mpi_reply, Mpi2RaidVolPage1_t *config_page, u32 form, u32 handle); +int mpt2sas_config_get_number_pds(struct MPT2SAS_ADAPTER *ioc, u16 handle, u8 *num_pds); +int mpt2sas_config_get_raid_volume_pg0(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t + *mpi_reply, Mpi2RaidVolPage0_t *config_page, u32 form, u32 handle, u16 sz); +int mpt2sas_config_get_phys_disk_pg0(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t + *mpi_reply, Mpi2RaidPhysDiskPage0_t *config_page, u32 form, + u32 form_specific); +int mpt2sas_config_get_volume_handle(struct MPT2SAS_ADAPTER *ioc, u16 pd_handle, + u16 *volume_handle); +int mpt2sas_config_get_volume_wwid(struct MPT2SAS_ADAPTER *ioc, u16 volume_handle, + u64 *wwid); + +/* ctl shared API */ +extern struct device_attribute *mpt2sas_host_attrs[]; +extern struct device_attribute *mpt2sas_dev_attrs[]; +void mpt2sas_ctl_init(void); +void mpt2sas_ctl_exit(void); +void mpt2sas_ctl_done(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 VF_ID, u32 reply); +void mpt2sas_ctl_reset_handler(struct MPT2SAS_ADAPTER *ioc, int reset_phase); +void mpt2sas_ctl_event_callback(struct MPT2SAS_ADAPTER *ioc, u8 VF_ID, u32 reply); +void mpt2sas_ctl_add_to_event_log(struct MPT2SAS_ADAPTER *ioc, + Mpi2EventNotificationReply_t *mpi_reply); + +/* transport shared API */ +void mpt2sas_transport_done(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 VF_ID, u32 reply); +struct _sas_port *mpt2sas_transport_port_add(struct MPT2SAS_ADAPTER *ioc, + u16 handle, u16 parent_handle); +void mpt2sas_transport_port_remove(struct MPT2SAS_ADAPTER *ioc, u64 sas_address, + u16 parent_handle); +int mpt2sas_transport_add_host_phy(struct MPT2SAS_ADAPTER *ioc, struct _sas_phy + *mpt2sas_phy, Mpi2SasPhyPage0_t phy_pg0, struct device *parent_dev); +int mpt2sas_transport_add_expander_phy(struct MPT2SAS_ADAPTER *ioc, struct _sas_phy + *mpt2sas_phy, Mpi2ExpanderPage1_t expander_pg1, struct device *parent_dev); +void mpt2sas_transport_update_phy_link_change(struct MPT2SAS_ADAPTER *ioc, u16 handle, + u16 attached_handle, u8 phy_number, u8 link_rate); +extern struct sas_function_template mpt2sas_transport_functions; +extern struct scsi_transport_template *mpt2sas_transport_template; + +#endif /* MPT2SAS_BASE_H_INCLUDED */ diff --git a/drivers/scsi/mpt2sas/mpt2sas_config.c b/drivers/scsi/mpt2sas/mpt2sas_config.c new file mode 100644 index 0000000..58cfb97 --- /dev/null +++ b/drivers/scsi/mpt2sas/mpt2sas_config.c @@ -0,0 +1,1873 @@ +/* + * This module provides common API for accessing firmware configuration pages + * + * This code is based on drivers/scsi/mpt2sas/mpt2_base.c + * Copyright (C) 2007-2008 LSI Corporation + * (mailto:DL-MPTFusionLinux@lsi.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * NO WARRANTY + * THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR + * CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT + * LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT, + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is + * solely responsible for determining the appropriateness of using and + * distributing the Program and assumes all risks associated with its + * exercise of rights under this Agreement, including but not limited to + * the risks and costs of program errors, damage to or loss of data, + * programs or equipment, and unavailability or interruption of operations. + + * DISCLAIMER OF LIABILITY + * NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR + * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE + * USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED + * HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES + + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, + * USA. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "mpt2sas_base.h" + +/* local definitions */ + +/* Timeout for config page request (in seconds) */ +#define MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT 15 + +/* Common sgl flags for READING a config page. */ +#define MPT2_CONFIG_COMMON_SGLFLAGS ((MPI2_SGE_FLAGS_SIMPLE_ELEMENT | \ + MPI2_SGE_FLAGS_LAST_ELEMENT | MPI2_SGE_FLAGS_END_OF_BUFFER \ + | MPI2_SGE_FLAGS_END_OF_LIST) << MPI2_SGE_FLAGS_SHIFT) + +/* Common sgl flags for WRITING a config page. */ +#define MPT2_CONFIG_COMMON_WRITE_SGLFLAGS ((MPI2_SGE_FLAGS_SIMPLE_ELEMENT | \ + MPI2_SGE_FLAGS_LAST_ELEMENT | MPI2_SGE_FLAGS_END_OF_BUFFER \ + | MPI2_SGE_FLAGS_END_OF_LIST | MPI2_SGE_FLAGS_HOST_TO_IOC) \ + << MPI2_SGE_FLAGS_SHIFT) + +/** + * struct config_request - obtain dma memory via routine + * @config_page_sz: size + * @config_page: virt pointer + * @config_page_dma: phys pointer + * + */ +struct config_request{ + u16 config_page_sz; + void *config_page; + dma_addr_t config_page_dma; +}; + +#ifdef CONFIG_SCSI_MPT2SAS_LOGGING +/** + * _config_display_some_debug - debug routine + * @ioc: per adapter object + * @smid: system request message index + * @calling_function_name: string pass from calling function + * @mpi_reply: reply message frame + * Context: none. + * + * Function for displaying debug info helpfull when debugging issues + * in this module. + */ +static void +_config_display_some_debug(struct MPT2SAS_ADAPTER *ioc, u16 smid, + char *calling_function_name, MPI2DefaultReply_t *mpi_reply) +{ + Mpi2ConfigRequest_t *mpi_request; + char *desc = NULL; + + if (!(ioc->logging_level & MPT_DEBUG_CONFIG)) + return; + + mpi_request = mpt2sas_base_get_msg_frame(ioc, smid); + switch (mpi_request->Header.PageType & MPI2_CONFIG_PAGETYPE_MASK) { + case MPI2_CONFIG_PAGETYPE_IO_UNIT: + desc = "io_unit"; + break; + case MPI2_CONFIG_PAGETYPE_IOC: + desc = "ioc"; + break; + case MPI2_CONFIG_PAGETYPE_BIOS: + desc = "bios"; + break; + case MPI2_CONFIG_PAGETYPE_RAID_VOLUME: + desc = "raid_volume"; + break; + case MPI2_CONFIG_PAGETYPE_MANUFACTURING: + desc = "manufaucturing"; + break; + case MPI2_CONFIG_PAGETYPE_RAID_PHYSDISK: + desc = "physdisk"; + break; + case MPI2_CONFIG_PAGETYPE_EXTENDED: + switch (mpi_request->ExtPageType) { + case MPI2_CONFIG_EXTPAGETYPE_SAS_IO_UNIT: + desc = "sas_io_unit"; + break; + case MPI2_CONFIG_EXTPAGETYPE_SAS_EXPANDER: + desc = "sas_expander"; + break; + case MPI2_CONFIG_EXTPAGETYPE_SAS_DEVICE: + desc = "sas_device"; + break; + case MPI2_CONFIG_EXTPAGETYPE_SAS_PHY: + desc = "sas_phy"; + break; + case MPI2_CONFIG_EXTPAGETYPE_LOG: + desc = "log"; + break; + case MPI2_CONFIG_EXTPAGETYPE_ENCLOSURE: + desc = "enclosure"; + break; + case MPI2_CONFIG_EXTPAGETYPE_RAID_CONFIG: + desc = "raid_config"; + break; + case MPI2_CONFIG_EXTPAGETYPE_DRIVER_MAPPING: + desc = "driver_mappping"; + break; + } + break; + } + + if (!desc) + return; + + printk(MPT2SAS_DEBUG_FMT "%s: %s(%d), action(%d), form(0x%08x), " + "smid(%d)\n", ioc->name, calling_function_name, desc, + mpi_request->Header.PageNumber, mpi_request->Action, + le32_to_cpu(mpi_request->PageAddress), smid); + + if (!mpi_reply) + return; + + if (mpi_reply->IOCStatus || mpi_reply->IOCLogInfo) + printk(MPT2SAS_DEBUG_FMT + "\tiocstatus(0x%04x), loginfo(0x%08x)\n", + ioc->name, le16_to_cpu(mpi_reply->IOCStatus), + le32_to_cpu(mpi_reply->IOCLogInfo)); +} +#endif + +/** + * mpt2sas_config_done - config page completion routine + * @ioc: per adapter object + * @smid: system request message index + * @VF_ID: virtual function id + * @reply: reply message frame(lower 32bit addr) + * Context: none. + * + * The callback handler when using _config_request. + * + * Return nothing. + */ +void +mpt2sas_config_done(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 VF_ID, u32 reply) +{ + MPI2DefaultReply_t *mpi_reply; + + if (ioc->config_cmds.status == MPT2_CMD_NOT_USED) + return; + if (ioc->config_cmds.smid != smid) + return; + ioc->config_cmds.status |= MPT2_CMD_COMPLETE; + mpi_reply = mpt2sas_base_get_reply_virt_addr(ioc, reply); + if (mpi_reply) { + ioc->config_cmds.status |= MPT2_CMD_REPLY_VALID; + memcpy(ioc->config_cmds.reply, mpi_reply, + mpi_reply->MsgLength*4); + } + ioc->config_cmds.status &= ~MPT2_CMD_PENDING; +#ifdef CONFIG_SCSI_MPT2SAS_LOGGING + _config_display_some_debug(ioc, smid, "config_done", mpi_reply); +#endif + complete(&ioc->config_cmds.done); +} + +/** + * _config_request - main routine for sending config page requests + * @ioc: per adapter object + * @mpi_request: request message frame + * @mpi_reply: reply mf payload returned from firmware + * @timeout: timeout in seconds + * Context: sleep, the calling function needs to acquire the config_cmds.mutex + * + * A generic API for config page requests to firmware. + * + * The ioc->config_cmds.status flag should be MPT2_CMD_NOT_USED before calling + * this API. + * + * The callback index is set inside `ioc->config_cb_idx. + * + * Returns 0 for success, non-zero for failure. + */ +static int +_config_request(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigRequest_t + *mpi_request, Mpi2ConfigReply_t *mpi_reply, int timeout) +{ + u16 smid; + u32 ioc_state; + unsigned long timeleft; + Mpi2ConfigRequest_t *config_request; + int r; + u8 retry_count; + u8 issue_reset; + u16 wait_state_count; + + if (ioc->config_cmds.status != MPT2_CMD_NOT_USED) { + printk(MPT2SAS_ERR_FMT "%s: config_cmd in use\n", + ioc->name, __func__); + return -EAGAIN; + } + retry_count = 0; + + retry_config: + wait_state_count = 0; + ioc_state = mpt2sas_base_get_iocstate(ioc, 1); + while (ioc_state != MPI2_IOC_STATE_OPERATIONAL) { + if (wait_state_count++ == MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT) { + printk(MPT2SAS_ERR_FMT + "%s: failed due to ioc not operational\n", + ioc->name, __func__); + ioc->config_cmds.status = MPT2_CMD_NOT_USED; + return -EFAULT; + } + ssleep(1); + ioc_state = mpt2sas_base_get_iocstate(ioc, 1); + printk(MPT2SAS_INFO_FMT "%s: waiting for " + "operational state(count=%d)\n", ioc->name, + __func__, wait_state_count); + } + if (wait_state_count) + printk(MPT2SAS_INFO_FMT "%s: ioc is operational\n", + ioc->name, __func__); + + smid = mpt2sas_base_get_smid(ioc, ioc->config_cb_idx); + if (!smid) { + printk(MPT2SAS_ERR_FMT "%s: failed obtaining a smid\n", + ioc->name, __func__); + ioc->config_cmds.status = MPT2_CMD_NOT_USED; + return -EAGAIN; + } + + r = 0; + memset(mpi_reply, 0, sizeof(Mpi2ConfigReply_t)); + ioc->config_cmds.status = MPT2_CMD_PENDING; + config_request = mpt2sas_base_get_msg_frame(ioc, smid); + ioc->config_cmds.smid = smid; + memcpy(config_request, mpi_request, sizeof(Mpi2ConfigRequest_t)); +#ifdef CONFIG_SCSI_MPT2SAS_LOGGING + _config_display_some_debug(ioc, smid, "config_request", NULL); +#endif + mpt2sas_base_put_smid_default(ioc, smid, config_request->VF_ID); + timeleft = wait_for_completion_timeout(&ioc->config_cmds.done, + timeout*HZ); + if (!(ioc->config_cmds.status & MPT2_CMD_COMPLETE)) { + printk(MPT2SAS_ERR_FMT "%s: timeout\n", + ioc->name, __func__); + _debug_dump_mf(mpi_request, + sizeof(Mpi2ConfigRequest_t)/4); + if (!(ioc->config_cmds.status & MPT2_CMD_RESET)) + issue_reset = 1; + goto issue_host_reset; + } + if (ioc->config_cmds.status & MPT2_CMD_REPLY_VALID) + memcpy(mpi_reply, ioc->config_cmds.reply, + sizeof(Mpi2ConfigReply_t)); + if (retry_count) + printk(MPT2SAS_INFO_FMT "%s: retry completed!!\n", + ioc->name, __func__); + ioc->config_cmds.status = MPT2_CMD_NOT_USED; + return r; + + issue_host_reset: + if (issue_reset) + mpt2sas_base_hard_reset_handler(ioc, CAN_SLEEP, + FORCE_BIG_HAMMER); + ioc->config_cmds.status = MPT2_CMD_NOT_USED; + if (!retry_count) { + printk(MPT2SAS_INFO_FMT "%s: attempting retry\n", + ioc->name, __func__); + retry_count++; + goto retry_config; + } + return -EFAULT; +} + +/** + * _config_alloc_config_dma_memory - obtain physical memory + * @ioc: per adapter object + * @mem: struct config_request + * + * A wrapper for obtaining dma-able memory for config page request. + * + * Returns 0 for success, non-zero for failure. + */ +static int +_config_alloc_config_dma_memory(struct MPT2SAS_ADAPTER *ioc, + struct config_request *mem) +{ + int r = 0; + + mem->config_page = pci_alloc_consistent(ioc->pdev, mem->config_page_sz, + &mem->config_page_dma); + if (!mem->config_page) + r = -ENOMEM; + return r; +} + +/** + * _config_free_config_dma_memory - wrapper to free the memory + * @ioc: per adapter object + * @mem: struct config_request + * + * A wrapper to free dma-able memory when using _config_alloc_config_dma_memory. + * + * Returns 0 for success, non-zero for failure. + */ +static void +_config_free_config_dma_memory(struct MPT2SAS_ADAPTER *ioc, + struct config_request *mem) +{ + pci_free_consistent(ioc->pdev, mem->config_page_sz, mem->config_page, + mem->config_page_dma); +} + +/** + * mpt2sas_config_get_manufacturing_pg0 - obtain manufacturing page 0 + * @ioc: per adapter object + * @mpi_reply: reply mf payload returned from firmware + * @config_page: contents of the config page + * Context: sleep. + * + * Returns 0 for success, non-zero for failure. + */ +int +mpt2sas_config_get_manufacturing_pg0(struct MPT2SAS_ADAPTER *ioc, + Mpi2ConfigReply_t *mpi_reply, Mpi2ManufacturingPage0_t *config_page) +{ + Mpi2ConfigRequest_t mpi_request; + int r; + struct config_request mem; + + mutex_lock(&ioc->config_cmds.mutex); + memset(config_page, 0, sizeof(Mpi2ManufacturingPage0_t)); + memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t)); + mpi_request.Function = MPI2_FUNCTION_CONFIG; + mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER; + mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_MANUFACTURING; + mpi_request.Header.PageNumber = 0; + mpi_request.Header.PageVersion = MPI2_MANUFACTURING0_PAGEVERSION; + mpt2sas_base_build_zero_len_sge(ioc, &mpi_request.PageBufferSGE); + r = _config_request(ioc, &mpi_request, mpi_reply, + MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT); + if (r) + goto out; + + mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT; + mpi_request.Header.PageVersion = mpi_reply->Header.PageVersion; + mpi_request.Header.PageNumber = mpi_reply->Header.PageNumber; + mpi_request.Header.PageType = mpi_reply->Header.PageType; + mpi_request.Header.PageLength = mpi_reply->Header.PageLength; + mem.config_page_sz = le16_to_cpu(mpi_reply->Header.PageLength) * 4; + if (mem.config_page_sz > ioc->config_page_sz) { + r = _config_alloc_config_dma_memory(ioc, &mem); + if (r) + goto out; + } else { + mem.config_page_dma = ioc->config_page_dma; + mem.config_page = ioc->config_page; + } + ioc->base_add_sg_single(&mpi_request.PageBufferSGE, + MPT2_CONFIG_COMMON_SGLFLAGS | mem.config_page_sz, + mem.config_page_dma); + r = _config_request(ioc, &mpi_request, mpi_reply, + MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT); + if (!r) + memcpy(config_page, mem.config_page, + min_t(u16, mem.config_page_sz, + sizeof(Mpi2ManufacturingPage0_t))); + + if (mem.config_page_sz > ioc->config_page_sz) + _config_free_config_dma_memory(ioc, &mem); + + out: + mutex_unlock(&ioc->config_cmds.mutex); + return r; +} + +/** + * mpt2sas_config_get_bios_pg2 - obtain bios page 2 + * @ioc: per adapter object + * @mpi_reply: reply mf payload returned from firmware + * @config_page: contents of the config page + * Context: sleep. + * + * Returns 0 for success, non-zero for failure. + */ +int +mpt2sas_config_get_bios_pg2(struct MPT2SAS_ADAPTER *ioc, + Mpi2ConfigReply_t *mpi_reply, Mpi2BiosPage2_t *config_page) +{ + Mpi2ConfigRequest_t mpi_request; + int r; + struct config_request mem; + + mutex_lock(&ioc->config_cmds.mutex); + memset(config_page, 0, sizeof(Mpi2BiosPage2_t)); + memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t)); + mpi_request.Function = MPI2_FUNCTION_CONFIG; + mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER; + mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_BIOS; + mpi_request.Header.PageNumber = 2; + mpi_request.Header.PageVersion = MPI2_BIOSPAGE2_PAGEVERSION; + mpt2sas_base_build_zero_len_sge(ioc, &mpi_request.PageBufferSGE); + r = _config_request(ioc, &mpi_request, mpi_reply, + MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT); + if (r) + goto out; + + mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT; + mpi_request.Header.PageVersion = mpi_reply->Header.PageVersion; + mpi_request.Header.PageNumber = mpi_reply->Header.PageNumber; + mpi_request.Header.PageType = mpi_reply->Header.PageType; + mpi_request.Header.PageLength = mpi_reply->Header.PageLength; + mem.config_page_sz = le16_to_cpu(mpi_reply->Header.PageLength) * 4; + if (mem.config_page_sz > ioc->config_page_sz) { + r = _config_alloc_config_dma_memory(ioc, &mem); + if (r) + goto out; + } else { + mem.config_page_dma = ioc->config_page_dma; + mem.config_page = ioc->config_page; + } + ioc->base_add_sg_single(&mpi_request.PageBufferSGE, + MPT2_CONFIG_COMMON_SGLFLAGS | mem.config_page_sz, + mem.config_page_dma); + r = _config_request(ioc, &mpi_request, mpi_reply, + MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT); + if (!r) + memcpy(config_page, mem.config_page, + min_t(u16, mem.config_page_sz, + sizeof(Mpi2BiosPage2_t))); + + if (mem.config_page_sz > ioc->config_page_sz) + _config_free_config_dma_memory(ioc, &mem); + + out: + mutex_unlock(&ioc->config_cmds.mutex); + return r; +} + +/** + * mpt2sas_config_get_bios_pg3 - obtain bios page 3 + * @ioc: per adapter object + * @mpi_reply: reply mf payload returned from firmware + * @config_page: contents of the config page + * Context: sleep. + * + * Returns 0 for success, non-zero for failure. + */ +int +mpt2sas_config_get_bios_pg3(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t + *mpi_reply, Mpi2BiosPage3_t *config_page) +{ + Mpi2ConfigRequest_t mpi_request; + int r; + struct config_request mem; + + mutex_lock(&ioc->config_cmds.mutex); + memset(config_page, 0, sizeof(Mpi2BiosPage3_t)); + memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t)); + mpi_request.Function = MPI2_FUNCTION_CONFIG; + mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER; + mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_BIOS; + mpi_request.Header.PageNumber = 3; + mpi_request.Header.PageVersion = MPI2_BIOSPAGE3_PAGEVERSION; + mpt2sas_base_build_zero_len_sge(ioc, &mpi_request.PageBufferSGE); + r = _config_request(ioc, &mpi_request, mpi_reply, + MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT); + if (r) + goto out; + + mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT; + mpi_request.Header.PageVersion = mpi_reply->Header.PageVersion; + mpi_request.Header.PageNumber = mpi_reply->Header.PageNumber; + mpi_request.Header.PageType = mpi_reply->Header.PageType; + mpi_request.Header.PageLength = mpi_reply->Header.PageLength; + mem.config_page_sz = le16_to_cpu(mpi_reply->Header.PageLength) * 4; + if (mem.config_page_sz > ioc->config_page_sz) { + r = _config_alloc_config_dma_memory(ioc, &mem); + if (r) + goto out; + } else { + mem.config_page_dma = ioc->config_page_dma; + mem.config_page = ioc->config_page; + } + ioc->base_add_sg_single(&mpi_request.PageBufferSGE, + MPT2_CONFIG_COMMON_SGLFLAGS | mem.config_page_sz, + mem.config_page_dma); + r = _config_request(ioc, &mpi_request, mpi_reply, + MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT); + if (!r) + memcpy(config_page, mem.config_page, + min_t(u16, mem.config_page_sz, + sizeof(Mpi2BiosPage3_t))); + + if (mem.config_page_sz > ioc->config_page_sz) + _config_free_config_dma_memory(ioc, &mem); + + out: + mutex_unlock(&ioc->config_cmds.mutex); + return r; +} + +/** + * mpt2sas_config_get_iounit_pg0 - obtain iounit page 0 + * @ioc: per adapter object + * @mpi_reply: reply mf payload returned from firmware + * @config_page: contents of the config page + * Context: sleep. + * + * Returns 0 for success, non-zero for failure. + */ +int +mpt2sas_config_get_iounit_pg0(struct MPT2SAS_ADAPTER *ioc, + Mpi2ConfigReply_t *mpi_reply, Mpi2IOUnitPage0_t *config_page) +{ + Mpi2ConfigRequest_t mpi_request; + int r; + struct config_request mem; + + mutex_lock(&ioc->config_cmds.mutex); + memset(config_page, 0, sizeof(Mpi2IOUnitPage0_t)); + memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t)); + mpi_request.Function = MPI2_FUNCTION_CONFIG; + mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER; + mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_IO_UNIT; + mpi_request.Header.PageNumber = 0; + mpi_request.Header.PageVersion = MPI2_IOUNITPAGE0_PAGEVERSION; + mpt2sas_base_build_zero_len_sge(ioc, &mpi_request.PageBufferSGE); + r = _config_request(ioc, &mpi_request, mpi_reply, + MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT); + if (r) + goto out; + + mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT; + mpi_request.Header.PageVersion = mpi_reply->Header.PageVersion; + mpi_request.Header.PageNumber = mpi_reply->Header.PageNumber; + mpi_request.Header.PageType = mpi_reply->Header.PageType; + mpi_request.Header.PageLength = mpi_reply->Header.PageLength; + mem.config_page_sz = le16_to_cpu(mpi_reply->Header.PageLength) * 4; + if (mem.config_page_sz > ioc->config_page_sz) { + r = _config_alloc_config_dma_memory(ioc, &mem); + if (r) + goto out; + } else { + mem.config_page_dma = ioc->config_page_dma; + mem.config_page = ioc->config_page; + } + ioc->base_add_sg_single(&mpi_request.PageBufferSGE, + MPT2_CONFIG_COMMON_SGLFLAGS | mem.config_page_sz, + mem.config_page_dma); + r = _config_request(ioc, &mpi_request, mpi_reply, + MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT); + if (!r) + memcpy(config_page, mem.config_page, + min_t(u16, mem.config_page_sz, + sizeof(Mpi2IOUnitPage0_t))); + + if (mem.config_page_sz > ioc->config_page_sz) + _config_free_config_dma_memory(ioc, &mem); + + out: + mutex_unlock(&ioc->config_cmds.mutex); + return r; +} + +/** + * mpt2sas_config_get_iounit_pg1 - obtain iounit page 1 + * @ioc: per adapter object + * @mpi_reply: reply mf payload returned from firmware + * @config_page: contents of the config page + * Context: sleep. + * + * Returns 0 for success, non-zero for failure. + */ +int +mpt2sas_config_get_iounit_pg1(struct MPT2SAS_ADAPTER *ioc, + Mpi2ConfigReply_t *mpi_reply, Mpi2IOUnitPage1_t *config_page) +{ + Mpi2ConfigRequest_t mpi_request; + int r; + struct config_request mem; + + mutex_lock(&ioc->config_cmds.mutex); + memset(config_page, 0, sizeof(Mpi2IOUnitPage1_t)); + memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t)); + mpi_request.Function = MPI2_FUNCTION_CONFIG; + mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER; + mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_IO_UNIT; + mpi_request.Header.PageNumber = 1; + mpi_request.Header.PageVersion = MPI2_IOUNITPAGE1_PAGEVERSION; + mpt2sas_base_build_zero_len_sge(ioc, &mpi_request.PageBufferSGE); + r = _config_request(ioc, &mpi_request, mpi_reply, + MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT); + if (r) + goto out; + + mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT; + mpi_request.Header.PageVersion = mpi_reply->Header.PageVersion; + mpi_request.Header.PageNumber = mpi_reply->Header.PageNumber; + mpi_request.Header.PageType = mpi_reply->Header.PageType; + mpi_request.Header.PageLength = mpi_reply->Header.PageLength; + mem.config_page_sz = le16_to_cpu(mpi_reply->Header.PageLength) * 4; + if (mem.config_page_sz > ioc->config_page_sz) { + r = _config_alloc_config_dma_memory(ioc, &mem); + if (r) + goto out; + } else { + mem.config_page_dma = ioc->config_page_dma; + mem.config_page = ioc->config_page; + } + ioc->base_add_sg_single(&mpi_request.PageBufferSGE, + MPT2_CONFIG_COMMON_SGLFLAGS | mem.config_page_sz, + mem.config_page_dma); + r = _config_request(ioc, &mpi_request, mpi_reply, + MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT); + if (!r) + memcpy(config_page, mem.config_page, + min_t(u16, mem.config_page_sz, + sizeof(Mpi2IOUnitPage1_t))); + + if (mem.config_page_sz > ioc->config_page_sz) + _config_free_config_dma_memory(ioc, &mem); + + out: + mutex_unlock(&ioc->config_cmds.mutex); + return r; +} + +/** + * mpt2sas_config_set_iounit_pg1 - set iounit page 1 + * @ioc: per adapter object + * @mpi_reply: reply mf payload returned from firmware + * @config_page: contents of the config page + * Context: sleep. + * + * Returns 0 for success, non-zero for failure. + */ +int +mpt2sas_config_set_iounit_pg1(struct MPT2SAS_ADAPTER *ioc, + Mpi2ConfigReply_t *mpi_reply, Mpi2IOUnitPage1_t config_page) +{ + Mpi2ConfigRequest_t mpi_request; + int r; + struct config_request mem; + + mutex_lock(&ioc->config_cmds.mutex); + memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t)); + mpi_request.Function = MPI2_FUNCTION_CONFIG; + mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER; + mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_IO_UNIT; + mpi_request.Header.PageNumber = 1; + mpi_request.Header.PageVersion = MPI2_IOUNITPAGE1_PAGEVERSION; + mpt2sas_base_build_zero_len_sge(ioc, &mpi_request.PageBufferSGE); + r = _config_request(ioc, &mpi_request, mpi_reply, + MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT); + if (r) + goto out; + + mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_WRITE_CURRENT; + mpi_request.Header.PageVersion = mpi_reply->Header.PageVersion; + mpi_request.Header.PageNumber = mpi_reply->Header.PageNumber; + mpi_request.Header.PageType = mpi_reply->Header.PageType; + mpi_request.Header.PageLength = mpi_reply->Header.PageLength; + mem.config_page_sz = le16_to_cpu(mpi_reply->Header.PageLength) * 4; + if (mem.config_page_sz > ioc->config_page_sz) { + r = _config_alloc_config_dma_memory(ioc, &mem); + if (r) + goto out; + } else { + mem.config_page_dma = ioc->config_page_dma; + mem.config_page = ioc->config_page; + } + + memset(mem.config_page, 0, mem.config_page_sz); + memcpy(mem.config_page, &config_page, + sizeof(Mpi2IOUnitPage1_t)); + + ioc->base_add_sg_single(&mpi_request.PageBufferSGE, + MPT2_CONFIG_COMMON_WRITE_SGLFLAGS | mem.config_page_sz, + mem.config_page_dma); + r = _config_request(ioc, &mpi_request, mpi_reply, + MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT); + + if (mem.config_page_sz > ioc->config_page_sz) + _config_free_config_dma_memory(ioc, &mem); + + out: + mutex_unlock(&ioc->config_cmds.mutex); + return r; +} + +/** + * mpt2sas_config_get_ioc_pg8 - obtain ioc page 8 + * @ioc: per adapter object + * @mpi_reply: reply mf payload returned from firmware + * @config_page: contents of the config page + * Context: sleep. + * + * Returns 0 for success, non-zero for failure. + */ +int +mpt2sas_config_get_ioc_pg8(struct MPT2SAS_ADAPTER *ioc, + Mpi2ConfigReply_t *mpi_reply, Mpi2IOCPage8_t *config_page) +{ + Mpi2ConfigRequest_t mpi_request; + int r; + struct config_request mem; + + mutex_lock(&ioc->config_cmds.mutex); + memset(config_page, 0, sizeof(Mpi2IOCPage8_t)); + memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t)); + mpi_request.Function = MPI2_FUNCTION_CONFIG; + mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER; + mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_IOC; + mpi_request.Header.PageNumber = 8; + mpi_request.Header.PageVersion = MPI2_IOCPAGE8_PAGEVERSION; + mpt2sas_base_build_zero_len_sge(ioc, &mpi_request.PageBufferSGE); + r = _config_request(ioc, &mpi_request, mpi_reply, + MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT); + if (r) + goto out; + + mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT; + mpi_request.Header.PageVersion = mpi_reply->Header.PageVersion; + mpi_request.Header.PageNumber = mpi_reply->Header.PageNumber; + mpi_request.Header.PageType = mpi_reply->Header.PageType; + mpi_request.Header.PageLength = mpi_reply->Header.PageLength; + mem.config_page_sz = le16_to_cpu(mpi_reply->Header.PageLength) * 4; + if (mem.config_page_sz > ioc->config_page_sz) { + r = _config_alloc_config_dma_memory(ioc, &mem); + if (r) + goto out; + } else { + mem.config_page_dma = ioc->config_page_dma; + mem.config_page = ioc->config_page; + } + ioc->base_add_sg_single(&mpi_request.PageBufferSGE, + MPT2_CONFIG_COMMON_SGLFLAGS | mem.config_page_sz, + mem.config_page_dma); + r = _config_request(ioc, &mpi_request, mpi_reply, + MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT); + if (!r) + memcpy(config_page, mem.config_page, + min_t(u16, mem.config_page_sz, + sizeof(Mpi2IOCPage8_t))); + + if (mem.config_page_sz > ioc->config_page_sz) + _config_free_config_dma_memory(ioc, &mem); + + out: + mutex_unlock(&ioc->config_cmds.mutex); + return r; +} + +/** + * mpt2sas_config_get_sas_device_pg0 - obtain sas device page 0 + * @ioc: per adapter object + * @mpi_reply: reply mf payload returned from firmware + * @config_page: contents of the config page + * @form: GET_NEXT_HANDLE or HANDLE + * @handle: device handle + * Context: sleep. + * + * Returns 0 for success, non-zero for failure. + */ +int +mpt2sas_config_get_sas_device_pg0(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t + *mpi_reply, Mpi2SasDevicePage0_t *config_page, u32 form, u32 handle) +{ + Mpi2ConfigRequest_t mpi_request; + int r; + struct config_request mem; + + mutex_lock(&ioc->config_cmds.mutex); + memset(config_page, 0, sizeof(Mpi2SasDevicePage0_t)); + memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t)); + mpi_request.Function = MPI2_FUNCTION_CONFIG; + mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER; + mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_EXTENDED; + mpi_request.ExtPageType = MPI2_CONFIG_EXTPAGETYPE_SAS_DEVICE; + mpi_request.Header.PageVersion = MPI2_SASDEVICE0_PAGEVERSION; + mpi_request.Header.PageNumber = 0; + mpt2sas_base_build_zero_len_sge(ioc, &mpi_request.PageBufferSGE); + r = _config_request(ioc, &mpi_request, mpi_reply, + MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT); + if (r) + goto out; + + mpi_request.PageAddress = cpu_to_le32(form | handle); + mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT; + mpi_request.Header.PageVersion = mpi_reply->Header.PageVersion; + mpi_request.Header.PageNumber = mpi_reply->Header.PageNumber; + mpi_request.Header.PageType = mpi_reply->Header.PageType; + mpi_request.ExtPageLength = mpi_reply->ExtPageLength; + mpi_request.ExtPageType = mpi_reply->ExtPageType; + mem.config_page_sz = le16_to_cpu(mpi_reply->ExtPageLength) * 4; + if (mem.config_page_sz > ioc->config_page_sz) { + r = _config_alloc_config_dma_memory(ioc, &mem); + if (r) + goto out; + } else { + mem.config_page_dma = ioc->config_page_dma; + mem.config_page = ioc->config_page; + } + ioc->base_add_sg_single(&mpi_request.PageBufferSGE, + MPT2_CONFIG_COMMON_SGLFLAGS | mem.config_page_sz, + mem.config_page_dma); + r = _config_request(ioc, &mpi_request, mpi_reply, + MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT); + if (!r) + memcpy(config_page, mem.config_page, + min_t(u16, mem.config_page_sz, + sizeof(Mpi2SasDevicePage0_t))); + + if (mem.config_page_sz > ioc->config_page_sz) + _config_free_config_dma_memory(ioc, &mem); + + out: + mutex_unlock(&ioc->config_cmds.mutex); + return r; +} + +/** + * mpt2sas_config_get_sas_device_pg1 - obtain sas device page 1 + * @ioc: per adapter object + * @mpi_reply: reply mf payload returned from firmware + * @config_page: contents of the config page + * @form: GET_NEXT_HANDLE or HANDLE + * @handle: device handle + * Context: sleep. + * + * Returns 0 for success, non-zero for failure. + */ +int +mpt2sas_config_get_sas_device_pg1(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t + *mpi_reply, Mpi2SasDevicePage1_t *config_page, u32 form, u32 handle) +{ + Mpi2ConfigRequest_t mpi_request; + int r; + struct config_request mem; + + mutex_lock(&ioc->config_cmds.mutex); + memset(config_page, 0, sizeof(Mpi2SasDevicePage1_t)); + memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t)); + mpi_request.Function = MPI2_FUNCTION_CONFIG; + mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER; + mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_EXTENDED; + mpi_request.ExtPageType = MPI2_CONFIG_EXTPAGETYPE_SAS_DEVICE; + mpi_request.Header.PageVersion = MPI2_SASDEVICE1_PAGEVERSION; + mpi_request.Header.PageNumber = 1; + mpt2sas_base_build_zero_len_sge(ioc, &mpi_request.PageBufferSGE); + r = _config_request(ioc, &mpi_request, mpi_reply, + MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT); + if (r) + goto out; + + mpi_request.PageAddress = cpu_to_le32(form | handle); + mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT; + mpi_request.Header.PageVersion = mpi_reply->Header.PageVersion; + mpi_request.Header.PageNumber = mpi_reply->Header.PageNumber; + mpi_request.Header.PageType = mpi_reply->Header.PageType; + mpi_request.ExtPageLength = mpi_reply->ExtPageLength; + mpi_request.ExtPageType = mpi_reply->ExtPageType; + mem.config_page_sz = le16_to_cpu(mpi_reply->ExtPageLength) * 4; + if (mem.config_page_sz > ioc->config_page_sz) { + r = _config_alloc_config_dma_memory(ioc, &mem); + if (r) + goto out; + } else { + mem.config_page_dma = ioc->config_page_dma; + mem.config_page = ioc->config_page; + } + ioc->base_add_sg_single(&mpi_request.PageBufferSGE, + MPT2_CONFIG_COMMON_SGLFLAGS | mem.config_page_sz, + mem.config_page_dma); + r = _config_request(ioc, &mpi_request, mpi_reply, + MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT); + if (!r) + memcpy(config_page, mem.config_page, + min_t(u16, mem.config_page_sz, + sizeof(Mpi2SasDevicePage1_t))); + + if (mem.config_page_sz > ioc->config_page_sz) + _config_free_config_dma_memory(ioc, &mem); + + out: + mutex_unlock(&ioc->config_cmds.mutex); + return r; +} + +/** + * mpt2sas_config_get_number_hba_phys - obtain number of phys on the host + * @ioc: per adapter object + * @num_phys: pointer returned with the number of phys + * Context: sleep. + * + * Returns 0 for success, non-zero for failure. + */ +int +mpt2sas_config_get_number_hba_phys(struct MPT2SAS_ADAPTER *ioc, u8 *num_phys) +{ + Mpi2ConfigRequest_t mpi_request; + int r; + struct config_request mem; + u16 ioc_status; + Mpi2ConfigReply_t mpi_reply; + Mpi2SasIOUnitPage0_t config_page; + + mutex_lock(&ioc->config_cmds.mutex); + memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t)); + mpi_request.Function = MPI2_FUNCTION_CONFIG; + mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER; + mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_EXTENDED; + mpi_request.ExtPageType = MPI2_CONFIG_EXTPAGETYPE_SAS_IO_UNIT; + mpi_request.Header.PageNumber = 0; + mpi_request.Header.PageVersion = MPI2_SASIOUNITPAGE0_PAGEVERSION; + mpt2sas_base_build_zero_len_sge(ioc, &mpi_request.PageBufferSGE); + r = _config_request(ioc, &mpi_request, &mpi_reply, + MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT); + if (r) + goto out; + + mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT; + mpi_request.Header.PageVersion = mpi_reply.Header.PageVersion; + mpi_request.Header.PageNumber = mpi_reply.Header.PageNumber; + mpi_request.Header.PageType = mpi_reply.Header.PageType; + mpi_request.ExtPageLength = mpi_reply.ExtPageLength; + mpi_request.ExtPageType = mpi_reply.ExtPageType; + mem.config_page_sz = le16_to_cpu(mpi_reply.ExtPageLength) * 4; + if (mem.config_page_sz > ioc->config_page_sz) { + r = _config_alloc_config_dma_memory(ioc, &mem); + if (r) + goto out; + } else { + mem.config_page_dma = ioc->config_page_dma; + mem.config_page = ioc->config_page; + } + ioc->base_add_sg_single(&mpi_request.PageBufferSGE, + MPT2_CONFIG_COMMON_SGLFLAGS | mem.config_page_sz, + mem.config_page_dma); + r = _config_request(ioc, &mpi_request, &mpi_reply, + MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT); + if (!r) { + ioc_status = le16_to_cpu(mpi_reply.IOCStatus) & + MPI2_IOCSTATUS_MASK; + if (ioc_status == MPI2_IOCSTATUS_SUCCESS) { + memcpy(&config_page, mem.config_page, + min_t(u16, mem.config_page_sz, + sizeof(Mpi2SasIOUnitPage0_t))); + *num_phys = config_page.NumPhys; + } + } + + if (mem.config_page_sz > ioc->config_page_sz) + _config_free_config_dma_memory(ioc, &mem); + + out: + mutex_unlock(&ioc->config_cmds.mutex); + return r; +} + +/** + * mpt2sas_config_get_sas_iounit_pg0 - obtain sas iounit page 0 + * @ioc: per adapter object + * @mpi_reply: reply mf payload returned from firmware + * @config_page: contents of the config page + * @sz: size of buffer passed in config_page + * Context: sleep. + * + * Calling function should call config_get_number_hba_phys prior to + * this function, so enough memory is allocated for config_page. + * + * Returns 0 for success, non-zero for failure. + */ +int +mpt2sas_config_get_sas_iounit_pg0(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t + *mpi_reply, Mpi2SasIOUnitPage0_t *config_page, u16 sz) +{ + Mpi2ConfigRequest_t mpi_request; + int r; + struct config_request mem; + + mutex_lock(&ioc->config_cmds.mutex); + memset(config_page, 0, sz); + memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t)); + mpi_request.Function = MPI2_FUNCTION_CONFIG; + mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER; + mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_EXTENDED; + mpi_request.ExtPageType = MPI2_CONFIG_EXTPAGETYPE_SAS_IO_UNIT; + mpi_request.Header.PageNumber = 0; + mpi_request.Header.PageVersion = MPI2_SASIOUNITPAGE0_PAGEVERSION; + mpt2sas_base_build_zero_len_sge(ioc, &mpi_request.PageBufferSGE); + r = _config_request(ioc, &mpi_request, mpi_reply, + MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT); + if (r) + goto out; + + mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT; + mpi_request.Header.PageVersion = mpi_reply->Header.PageVersion; + mpi_request.Header.PageNumber = mpi_reply->Header.PageNumber; + mpi_request.Header.PageType = mpi_reply->Header.PageType; + mpi_request.ExtPageLength = mpi_reply->ExtPageLength; + mpi_request.ExtPageType = mpi_reply->ExtPageType; + mem.config_page_sz = le16_to_cpu(mpi_reply->ExtPageLength) * 4; + if (mem.config_page_sz > ioc->config_page_sz) { + r = _config_alloc_config_dma_memory(ioc, &mem); + if (r) + goto out; + } else { + mem.config_page_dma = ioc->config_page_dma; + mem.config_page = ioc->config_page; + } + ioc->base_add_sg_single(&mpi_request.PageBufferSGE, + MPT2_CONFIG_COMMON_SGLFLAGS | mem.config_page_sz, + mem.config_page_dma); + r = _config_request(ioc, &mpi_request, mpi_reply, + MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT); + if (!r) + memcpy(config_page, mem.config_page, + min_t(u16, sz, mem.config_page_sz)); + + if (mem.config_page_sz > ioc->config_page_sz) + _config_free_config_dma_memory(ioc, &mem); + + out: + mutex_unlock(&ioc->config_cmds.mutex); + return r; +} + +/** + * mpt2sas_config_get_sas_iounit_pg1 - obtain sas iounit page 0 + * @ioc: per adapter object + * @mpi_reply: reply mf payload returned from firmware + * @config_page: contents of the config page + * @sz: size of buffer passed in config_page + * Context: sleep. + * + * Calling function should call config_get_number_hba_phys prior to + * this function, so enough memory is allocated for config_page. + * + * Returns 0 for success, non-zero for failure. + */ +int +mpt2sas_config_get_sas_iounit_pg1(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t + *mpi_reply, Mpi2SasIOUnitPage1_t *config_page, u16 sz) +{ + Mpi2ConfigRequest_t mpi_request; + int r; + struct config_request mem; + + mutex_lock(&ioc->config_cmds.mutex); + memset(config_page, 0, sz); + memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t)); + mpi_request.Function = MPI2_FUNCTION_CONFIG; + mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER; + mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_EXTENDED; + mpi_request.ExtPageType = MPI2_CONFIG_EXTPAGETYPE_SAS_IO_UNIT; + mpi_request.Header.PageNumber = 1; + mpi_request.Header.PageVersion = MPI2_SASIOUNITPAGE0_PAGEVERSION; + mpt2sas_base_build_zero_len_sge(ioc, &mpi_request.PageBufferSGE); + r = _config_request(ioc, &mpi_request, mpi_reply, + MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT); + if (r) + goto out; + + mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT; + mpi_request.Header.PageVersion = mpi_reply->Header.PageVersion; + mpi_request.Header.PageNumber = mpi_reply->Header.PageNumber; + mpi_request.Header.PageType = mpi_reply->Header.PageType; + mpi_request.ExtPageLength = mpi_reply->ExtPageLength; + mpi_request.ExtPageType = mpi_reply->ExtPageType; + mem.config_page_sz = le16_to_cpu(mpi_reply->ExtPageLength) * 4; + if (mem.config_page_sz > ioc->config_page_sz) { + r = _config_alloc_config_dma_memory(ioc, &mem); + if (r) + goto out; + } else { + mem.config_page_dma = ioc->config_page_dma; + mem.config_page = ioc->config_page; + } + ioc->base_add_sg_single(&mpi_request.PageBufferSGE, + MPT2_CONFIG_COMMON_SGLFLAGS | mem.config_page_sz, + mem.config_page_dma); + r = _config_request(ioc, &mpi_request, mpi_reply, + MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT); + if (!r) + memcpy(config_page, mem.config_page, + min_t(u16, sz, mem.config_page_sz)); + + if (mem.config_page_sz > ioc->config_page_sz) + _config_free_config_dma_memory(ioc, &mem); + + out: + mutex_unlock(&ioc->config_cmds.mutex); + return r; +} + +/** + * mpt2sas_config_get_expander_pg0 - obtain expander page 0 + * @ioc: per adapter object + * @mpi_reply: reply mf payload returned from firmware + * @config_page: contents of the config page + * @form: GET_NEXT_HANDLE or HANDLE + * @handle: expander handle + * Context: sleep. + * + * Returns 0 for success, non-zero for failure. + */ +int +mpt2sas_config_get_expander_pg0(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t + *mpi_reply, Mpi2ExpanderPage0_t *config_page, u32 form, u32 handle) +{ + Mpi2ConfigRequest_t mpi_request; + int r; + struct config_request mem; + + mutex_lock(&ioc->config_cmds.mutex); + memset(config_page, 0, sizeof(Mpi2ExpanderPage0_t)); + memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t)); + mpi_request.Function = MPI2_FUNCTION_CONFIG; + mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER; + mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_EXTENDED; + mpi_request.ExtPageType = MPI2_CONFIG_EXTPAGETYPE_SAS_EXPANDER; + mpi_request.Header.PageNumber = 0; + mpi_request.Header.PageVersion = MPI2_SASEXPANDER0_PAGEVERSION; + mpt2sas_base_build_zero_len_sge(ioc, &mpi_request.PageBufferSGE); + r = _config_request(ioc, &mpi_request, mpi_reply, + MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT); + if (r) + goto out; + + mpi_request.PageAddress = cpu_to_le32(form | handle); + mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT; + mpi_request.Header.PageVersion = mpi_reply->Header.PageVersion; + mpi_request.Header.PageNumber = mpi_reply->Header.PageNumber; + mpi_request.Header.PageType = mpi_reply->Header.PageType; + mpi_request.ExtPageLength = mpi_reply->ExtPageLength; + mpi_request.ExtPageType = mpi_reply->ExtPageType; + mem.config_page_sz = le16_to_cpu(mpi_reply->ExtPageLength) * 4; + if (mem.config_page_sz > ioc->config_page_sz) { + r = _config_alloc_config_dma_memory(ioc, &mem); + if (r) + goto out; + } else { + mem.config_page_dma = ioc->config_page_dma; + mem.config_page = ioc->config_page; + } + ioc->base_add_sg_single(&mpi_request.PageBufferSGE, + MPT2_CONFIG_COMMON_SGLFLAGS | mem.config_page_sz, + mem.config_page_dma); + r = _config_request(ioc, &mpi_request, mpi_reply, + MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT); + if (!r) + memcpy(config_page, mem.config_page, + min_t(u16, mem.config_page_sz, + sizeof(Mpi2ExpanderPage0_t))); + + if (mem.config_page_sz > ioc->config_page_sz) + _config_free_config_dma_memory(ioc, &mem); + + out: + mutex_unlock(&ioc->config_cmds.mutex); + return r; +} + +/** + * mpt2sas_config_get_expander_pg1 - obtain expander page 1 + * @ioc: per adapter object + * @mpi_reply: reply mf payload returned from firmware + * @config_page: contents of the config page + * @phy_number: phy number + * @handle: expander handle + * Context: sleep. + * + * Returns 0 for success, non-zero for failure. + */ +int +mpt2sas_config_get_expander_pg1(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t + *mpi_reply, Mpi2ExpanderPage1_t *config_page, u32 phy_number, + u16 handle) +{ + Mpi2ConfigRequest_t mpi_request; + int r; + struct config_request mem; + + mutex_lock(&ioc->config_cmds.mutex); + memset(config_page, 0, sizeof(Mpi2ExpanderPage1_t)); + memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t)); + mpi_request.Function = MPI2_FUNCTION_CONFIG; + mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER; + mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_EXTENDED; + mpi_request.ExtPageType = MPI2_CONFIG_EXTPAGETYPE_SAS_EXPANDER; + mpi_request.Header.PageNumber = 1; + mpi_request.Header.PageVersion = MPI2_SASEXPANDER1_PAGEVERSION; + mpt2sas_base_build_zero_len_sge(ioc, &mpi_request.PageBufferSGE); + r = _config_request(ioc, &mpi_request, mpi_reply, + MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT); + if (r) + goto out; + + mpi_request.PageAddress = + cpu_to_le32(MPI2_SAS_EXPAND_PGAD_FORM_HNDL_PHY_NUM | + (phy_number << MPI2_SAS_EXPAND_PGAD_PHYNUM_SHIFT) | handle); + mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT; + mpi_request.Header.PageVersion = mpi_reply->Header.PageVersion; + mpi_request.Header.PageNumber = mpi_reply->Header.PageNumber; + mpi_request.Header.PageType = mpi_reply->Header.PageType; + mpi_request.ExtPageLength = mpi_reply->ExtPageLength; + mpi_request.ExtPageType = mpi_reply->ExtPageType; + mem.config_page_sz = le16_to_cpu(mpi_reply->ExtPageLength) * 4; + if (mem.config_page_sz > ioc->config_page_sz) { + r = _config_alloc_config_dma_memory(ioc, &mem); + if (r) + goto out; + } else { + mem.config_page_dma = ioc->config_page_dma; + mem.config_page = ioc->config_page; + } + ioc->base_add_sg_single(&mpi_request.PageBufferSGE, + MPT2_CONFIG_COMMON_SGLFLAGS | mem.config_page_sz, + mem.config_page_dma); + r = _config_request(ioc, &mpi_request, mpi_reply, + MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT); + if (!r) + memcpy(config_page, mem.config_page, + min_t(u16, mem.config_page_sz, + sizeof(Mpi2ExpanderPage1_t))); + + if (mem.config_page_sz > ioc->config_page_sz) + _config_free_config_dma_memory(ioc, &mem); + + out: + mutex_unlock(&ioc->config_cmds.mutex); + return r; +} + +/** + * mpt2sas_config_get_enclosure_pg0 - obtain enclosure page 0 + * @ioc: per adapter object + * @mpi_reply: reply mf payload returned from firmware + * @config_page: contents of the config page + * @form: GET_NEXT_HANDLE or HANDLE + * @handle: expander handle + * Context: sleep. + * + * Returns 0 for success, non-zero for failure. + */ +int +mpt2sas_config_get_enclosure_pg0(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t + *mpi_reply, Mpi2SasEnclosurePage0_t *config_page, u32 form, u32 handle) +{ + Mpi2ConfigRequest_t mpi_request; + int r; + struct config_request mem; + + mutex_lock(&ioc->config_cmds.mutex); + memset(config_page, 0, sizeof(Mpi2SasEnclosurePage0_t)); + memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t)); + mpi_request.Function = MPI2_FUNCTION_CONFIG; + mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER; + mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_EXTENDED; + mpi_request.ExtPageType = MPI2_CONFIG_EXTPAGETYPE_ENCLOSURE; + mpi_request.Header.PageNumber = 0; + mpi_request.Header.PageVersion = MPI2_SASENCLOSURE0_PAGEVERSION; + mpt2sas_base_build_zero_len_sge(ioc, &mpi_request.PageBufferSGE); + r = _config_request(ioc, &mpi_request, mpi_reply, + MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT); + if (r) + goto out; + + mpi_request.PageAddress = cpu_to_le32(form | handle); + mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT; + mpi_request.Header.PageVersion = mpi_reply->Header.PageVersion; + mpi_request.Header.PageNumber = mpi_reply->Header.PageNumber; + mpi_request.Header.PageType = mpi_reply->Header.PageType; + mpi_request.ExtPageLength = mpi_reply->ExtPageLength; + mpi_request.ExtPageType = mpi_reply->ExtPageType; + mem.config_page_sz = le16_to_cpu(mpi_reply->ExtPageLength) * 4; + if (mem.config_page_sz > ioc->config_page_sz) { + r = _config_alloc_config_dma_memory(ioc, &mem); + if (r) + goto out; + } else { + mem.config_page_dma = ioc->config_page_dma; + mem.config_page = ioc->config_page; + } + ioc->base_add_sg_single(&mpi_request.PageBufferSGE, + MPT2_CONFIG_COMMON_SGLFLAGS | mem.config_page_sz, + mem.config_page_dma); + r = _config_request(ioc, &mpi_request, mpi_reply, + MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT); + if (!r) + memcpy(config_page, mem.config_page, + min_t(u16, mem.config_page_sz, + sizeof(Mpi2SasEnclosurePage0_t))); + + if (mem.config_page_sz > ioc->config_page_sz) + _config_free_config_dma_memory(ioc, &mem); + + out: + mutex_unlock(&ioc->config_cmds.mutex); + return r; +} + +/** + * mpt2sas_config_get_phy_pg0 - obtain phy page 0 + * @ioc: per adapter object + * @mpi_reply: reply mf payload returned from firmware + * @config_page: contents of the config page + * @phy_number: phy number + * Context: sleep. + * + * Returns 0 for success, non-zero for failure. + */ +int +mpt2sas_config_get_phy_pg0(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t + *mpi_reply, Mpi2SasPhyPage0_t *config_page, u32 phy_number) +{ + Mpi2ConfigRequest_t mpi_request; + int r; + struct config_request mem; + + mutex_lock(&ioc->config_cmds.mutex); + memset(config_page, 0, sizeof(Mpi2SasPhyPage0_t)); + memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t)); + mpi_request.Function = MPI2_FUNCTION_CONFIG; + mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER; + mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_EXTENDED; + mpi_request.ExtPageType = MPI2_CONFIG_EXTPAGETYPE_SAS_PHY; + mpi_request.Header.PageNumber = 0; + mpi_request.Header.PageVersion = MPI2_SASPHY0_PAGEVERSION; + mpt2sas_base_build_zero_len_sge(ioc, &mpi_request.PageBufferSGE); + r = _config_request(ioc, &mpi_request, mpi_reply, + MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT); + if (r) + goto out; + + mpi_request.PageAddress = + cpu_to_le32(MPI2_SAS_PHY_PGAD_FORM_PHY_NUMBER | phy_number); + mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT; + mpi_request.Header.PageVersion = mpi_reply->Header.PageVersion; + mpi_request.Header.PageNumber = mpi_reply->Header.PageNumber; + mpi_request.Header.PageType = mpi_reply->Header.PageType; + mpi_request.ExtPageLength = mpi_reply->ExtPageLength; + mpi_request.ExtPageType = mpi_reply->ExtPageType; + mem.config_page_sz = le16_to_cpu(mpi_reply->ExtPageLength) * 4; + if (mem.config_page_sz > ioc->config_page_sz) { + r = _config_alloc_config_dma_memory(ioc, &mem); + if (r) + goto out; + } else { + mem.config_page_dma = ioc->config_page_dma; + mem.config_page = ioc->config_page; + } + ioc->base_add_sg_single(&mpi_request.PageBufferSGE, + MPT2_CONFIG_COMMON_SGLFLAGS | mem.config_page_sz, + mem.config_page_dma); + r = _config_request(ioc, &mpi_request, mpi_reply, + MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT); + if (!r) + memcpy(config_page, mem.config_page, + min_t(u16, mem.config_page_sz, + sizeof(Mpi2SasPhyPage0_t))); + + if (mem.config_page_sz > ioc->config_page_sz) + _config_free_config_dma_memory(ioc, &mem); + + out: + mutex_unlock(&ioc->config_cmds.mutex); + return r; +} + +/** + * mpt2sas_config_get_phy_pg1 - obtain phy page 1 + * @ioc: per adapter object + * @mpi_reply: reply mf payload returned from firmware + * @config_page: contents of the config page + * @phy_number: phy number + * Context: sleep. + * + * Returns 0 for success, non-zero for failure. + */ +int +mpt2sas_config_get_phy_pg1(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t + *mpi_reply, Mpi2SasPhyPage1_t *config_page, u32 phy_number) +{ + Mpi2ConfigRequest_t mpi_request; + int r; + struct config_request mem; + + mutex_lock(&ioc->config_cmds.mutex); + memset(config_page, 0, sizeof(Mpi2SasPhyPage1_t)); + memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t)); + mpi_request.Function = MPI2_FUNCTION_CONFIG; + mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER; + mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_EXTENDED; + mpi_request.ExtPageType = MPI2_CONFIG_EXTPAGETYPE_SAS_PHY; + mpi_request.Header.PageNumber = 1; + mpi_request.Header.PageVersion = MPI2_SASPHY1_PAGEVERSION; + mpt2sas_base_build_zero_len_sge(ioc, &mpi_request.PageBufferSGE); + r = _config_request(ioc, &mpi_request, mpi_reply, + MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT); + if (r) + goto out; + + mpi_request.PageAddress = + cpu_to_le32(MPI2_SAS_PHY_PGAD_FORM_PHY_NUMBER | phy_number); + mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT; + mpi_request.Header.PageVersion = mpi_reply->Header.PageVersion; + mpi_request.Header.PageNumber = mpi_reply->Header.PageNumber; + mpi_request.Header.PageType = mpi_reply->Header.PageType; + mpi_request.ExtPageLength = mpi_reply->ExtPageLength; + mpi_request.ExtPageType = mpi_reply->ExtPageType; + mem.config_page_sz = le16_to_cpu(mpi_reply->ExtPageLength) * 4; + if (mem.config_page_sz > ioc->config_page_sz) { + r = _config_alloc_config_dma_memory(ioc, &mem); + if (r) + goto out; + } else { + mem.config_page_dma = ioc->config_page_dma; + mem.config_page = ioc->config_page; + } + ioc->base_add_sg_single(&mpi_request.PageBufferSGE, + MPT2_CONFIG_COMMON_SGLFLAGS | mem.config_page_sz, + mem.config_page_dma); + r = _config_request(ioc, &mpi_request, mpi_reply, + MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT); + if (!r) + memcpy(config_page, mem.config_page, + min_t(u16, mem.config_page_sz, + sizeof(Mpi2SasPhyPage1_t))); + + if (mem.config_page_sz > ioc->config_page_sz) + _config_free_config_dma_memory(ioc, &mem); + + out: + mutex_unlock(&ioc->config_cmds.mutex); + return r; +} + +/** + * mpt2sas_config_get_raid_volume_pg1 - obtain raid volume page 1 + * @ioc: per adapter object + * @mpi_reply: reply mf payload returned from firmware + * @config_page: contents of the config page + * @form: GET_NEXT_HANDLE or HANDLE + * @handle: volume handle + * Context: sleep. + * + * Returns 0 for success, non-zero for failure. + */ +int +mpt2sas_config_get_raid_volume_pg1(struct MPT2SAS_ADAPTER *ioc, + Mpi2ConfigReply_t *mpi_reply, Mpi2RaidVolPage1_t *config_page, u32 form, + u32 handle) +{ + Mpi2ConfigRequest_t mpi_request; + int r; + struct config_request mem; + + mutex_lock(&ioc->config_cmds.mutex); + memset(config_page, 0, sizeof(Mpi2RaidVolPage1_t)); + memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t)); + mpi_request.Function = MPI2_FUNCTION_CONFIG; + mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER; + mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_RAID_VOLUME; + mpi_request.Header.PageNumber = 1; + mpi_request.Header.PageVersion = MPI2_RAIDVOLPAGE1_PAGEVERSION; + mpt2sas_base_build_zero_len_sge(ioc, &mpi_request.PageBufferSGE); + r = _config_request(ioc, &mpi_request, mpi_reply, + MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT); + if (r) + goto out; + + mpi_request.PageAddress = cpu_to_le32(form | handle); + mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT; + mpi_request.Header.PageVersion = mpi_reply->Header.PageVersion; + mpi_request.Header.PageNumber = mpi_reply->Header.PageNumber; + mpi_request.Header.PageType = mpi_reply->Header.PageType; + mpi_request.Header.PageLength = mpi_reply->Header.PageLength; + mem.config_page_sz = le16_to_cpu(mpi_reply->Header.PageLength) * 4; + if (mem.config_page_sz > ioc->config_page_sz) { + r = _config_alloc_config_dma_memory(ioc, &mem); + if (r) + goto out; + } else { + mem.config_page_dma = ioc->config_page_dma; + mem.config_page = ioc->config_page; + } + ioc->base_add_sg_single(&mpi_request.PageBufferSGE, + MPT2_CONFIG_COMMON_SGLFLAGS | mem.config_page_sz, + mem.config_page_dma); + r = _config_request(ioc, &mpi_request, mpi_reply, + MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT); + if (!r) + memcpy(config_page, mem.config_page, + min_t(u16, mem.config_page_sz, + sizeof(Mpi2RaidVolPage1_t))); + + if (mem.config_page_sz > ioc->config_page_sz) + _config_free_config_dma_memory(ioc, &mem); + + out: + mutex_unlock(&ioc->config_cmds.mutex); + return r; +} + +/** + * mpt2sas_config_get_number_pds - obtain number of phys disk assigned to volume + * @ioc: per adapter object + * @handle: volume handle + * @num_pds: returns pds count + * Context: sleep. + * + * Returns 0 for success, non-zero for failure. + */ +int +mpt2sas_config_get_number_pds(struct MPT2SAS_ADAPTER *ioc, u16 handle, + u8 *num_pds) +{ + Mpi2ConfigRequest_t mpi_request; + Mpi2RaidVolPage0_t *config_page; + Mpi2ConfigReply_t mpi_reply; + int r; + struct config_request mem; + u16 ioc_status; + + mutex_lock(&ioc->config_cmds.mutex); + memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t)); + *num_pds = 0; + mpi_request.Function = MPI2_FUNCTION_CONFIG; + mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER; + mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_RAID_VOLUME; + mpi_request.Header.PageNumber = 0; + mpi_request.Header.PageVersion = MPI2_RAIDVOLPAGE0_PAGEVERSION; + mpt2sas_base_build_zero_len_sge(ioc, &mpi_request.PageBufferSGE); + r = _config_request(ioc, &mpi_request, &mpi_reply, + MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT); + if (r) + goto out; + + mpi_request.PageAddress = + cpu_to_le32(MPI2_RAID_VOLUME_PGAD_FORM_HANDLE | handle); + mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT; + mpi_request.Header.PageVersion = mpi_reply.Header.PageVersion; + mpi_request.Header.PageNumber = mpi_reply.Header.PageNumber; + mpi_request.Header.PageType = mpi_reply.Header.PageType; + mpi_request.Header.PageLength = mpi_reply.Header.PageLength; + mem.config_page_sz = le16_to_cpu(mpi_reply.Header.PageLength) * 4; + if (mem.config_page_sz > ioc->config_page_sz) { + r = _config_alloc_config_dma_memory(ioc, &mem); + if (r) + goto out; + } else { + mem.config_page_dma = ioc->config_page_dma; + mem.config_page = ioc->config_page; + } + ioc->base_add_sg_single(&mpi_request.PageBufferSGE, + MPT2_CONFIG_COMMON_SGLFLAGS | mem.config_page_sz, + mem.config_page_dma); + r = _config_request(ioc, &mpi_request, &mpi_reply, + MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT); + if (!r) { + ioc_status = le16_to_cpu(mpi_reply.IOCStatus) & + MPI2_IOCSTATUS_MASK; + if (ioc_status == MPI2_IOCSTATUS_SUCCESS) { + config_page = mem.config_page; + *num_pds = config_page->NumPhysDisks; + } + } + + if (mem.config_page_sz > ioc->config_page_sz) + _config_free_config_dma_memory(ioc, &mem); + + out: + mutex_unlock(&ioc->config_cmds.mutex); + return r; +} + +/** + * mpt2sas_config_get_raid_volume_pg0 - obtain raid volume page 0 + * @ioc: per adapter object + * @mpi_reply: reply mf payload returned from firmware + * @config_page: contents of the config page + * @form: GET_NEXT_HANDLE or HANDLE + * @handle: volume handle + * @sz: size of buffer passed in config_page + * Context: sleep. + * + * Returns 0 for success, non-zero for failure. + */ +int +mpt2sas_config_get_raid_volume_pg0(struct MPT2SAS_ADAPTER *ioc, + Mpi2ConfigReply_t *mpi_reply, Mpi2RaidVolPage0_t *config_page, u32 form, + u32 handle, u16 sz) +{ + Mpi2ConfigRequest_t mpi_request; + int r; + struct config_request mem; + + mutex_lock(&ioc->config_cmds.mutex); + memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t)); + memset(config_page, 0, sz); + mpi_request.Function = MPI2_FUNCTION_CONFIG; + mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER; + mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_RAID_VOLUME; + mpi_request.Header.PageNumber = 0; + mpi_request.Header.PageVersion = MPI2_RAIDVOLPAGE0_PAGEVERSION; + mpt2sas_base_build_zero_len_sge(ioc, &mpi_request.PageBufferSGE); + r = _config_request(ioc, &mpi_request, mpi_reply, + MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT); + if (r) + goto out; + + mpi_request.PageAddress = cpu_to_le32(form | handle); + mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT; + mpi_request.Header.PageVersion = mpi_reply->Header.PageVersion; + mpi_request.Header.PageNumber = mpi_reply->Header.PageNumber; + mpi_request.Header.PageType = mpi_reply->Header.PageType; + mpi_request.Header.PageLength = mpi_reply->Header.PageLength; + mem.config_page_sz = le16_to_cpu(mpi_reply->Header.PageLength) * 4; + if (mem.config_page_sz > ioc->config_page_sz) { + r = _config_alloc_config_dma_memory(ioc, &mem); + if (r) + goto out; + } else { + mem.config_page_dma = ioc->config_page_dma; + mem.config_page = ioc->config_page; + } + ioc->base_add_sg_single(&mpi_request.PageBufferSGE, + MPT2_CONFIG_COMMON_SGLFLAGS | mem.config_page_sz, + mem.config_page_dma); + r = _config_request(ioc, &mpi_request, mpi_reply, + MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT); + if (!r) + memcpy(config_page, mem.config_page, + min_t(u16, sz, mem.config_page_sz)); + + if (mem.config_page_sz > ioc->config_page_sz) + _config_free_config_dma_memory(ioc, &mem); + + out: + mutex_unlock(&ioc->config_cmds.mutex); + return r; +} + +/** + * mpt2sas_config_get_phys_disk_pg0 - obtain phys disk page 0 + * @ioc: per adapter object + * @mpi_reply: reply mf payload returned from firmware + * @config_page: contents of the config page + * @form: GET_NEXT_PHYSDISKNUM, PHYSDISKNUM, DEVHANDLE + * @form_specific: specific to the form + * Context: sleep. + * + * Returns 0 for success, non-zero for failure. + */ +int +mpt2sas_config_get_phys_disk_pg0(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t + *mpi_reply, Mpi2RaidPhysDiskPage0_t *config_page, u32 form, + u32 form_specific) +{ + Mpi2ConfigRequest_t mpi_request; + int r; + struct config_request mem; + + mutex_lock(&ioc->config_cmds.mutex); + memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t)); + memset(config_page, 0, sizeof(Mpi2RaidPhysDiskPage0_t)); + mpi_request.Function = MPI2_FUNCTION_CONFIG; + mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER; + mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_RAID_PHYSDISK; + mpi_request.Header.PageNumber = 0; + mpi_request.Header.PageVersion = MPI2_RAIDPHYSDISKPAGE0_PAGEVERSION; + mpt2sas_base_build_zero_len_sge(ioc, &mpi_request.PageBufferSGE); + r = _config_request(ioc, &mpi_request, mpi_reply, + MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT); + if (r) + goto out; + + mpi_request.PageAddress = cpu_to_le32(form | form_specific); + mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT; + mpi_request.Header.PageVersion = mpi_reply->Header.PageVersion; + mpi_request.Header.PageNumber = mpi_reply->Header.PageNumber; + mpi_request.Header.PageType = mpi_reply->Header.PageType; + mpi_request.Header.PageLength = mpi_reply->Header.PageLength; + mem.config_page_sz = le16_to_cpu(mpi_reply->Header.PageLength) * 4; + if (mem.config_page_sz > ioc->config_page_sz) { + r = _config_alloc_config_dma_memory(ioc, &mem); + if (r) + goto out; + } else { + mem.config_page_dma = ioc->config_page_dma; + mem.config_page = ioc->config_page; + } + ioc->base_add_sg_single(&mpi_request.PageBufferSGE, + MPT2_CONFIG_COMMON_SGLFLAGS | mem.config_page_sz, + mem.config_page_dma); + r = _config_request(ioc, &mpi_request, mpi_reply, + MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT); + if (!r) + memcpy(config_page, mem.config_page, + min_t(u16, mem.config_page_sz, + sizeof(Mpi2RaidPhysDiskPage0_t))); + + if (mem.config_page_sz > ioc->config_page_sz) + _config_free_config_dma_memory(ioc, &mem); + + out: + mutex_unlock(&ioc->config_cmds.mutex); + return r; +} + +/** + * mpt2sas_config_get_volume_handle - returns volume handle for give hidden raid components + * @ioc: per adapter object + * @pd_handle: phys disk handle + * @volume_handle: volume handle + * Context: sleep. + * + * Returns 0 for success, non-zero for failure. + */ +int +mpt2sas_config_get_volume_handle(struct MPT2SAS_ADAPTER *ioc, u16 pd_handle, + u16 *volume_handle) +{ + Mpi2RaidConfigurationPage0_t *config_page; + Mpi2ConfigRequest_t mpi_request; + Mpi2ConfigReply_t mpi_reply; + int r, i; + struct config_request mem; + u16 ioc_status; + + mutex_lock(&ioc->config_cmds.mutex); + *volume_handle = 0; + memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t)); + mpi_request.Function = MPI2_FUNCTION_CONFIG; + mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER; + mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_EXTENDED; + mpi_request.ExtPageType = MPI2_CONFIG_EXTPAGETYPE_RAID_CONFIG; + mpi_request.Header.PageVersion = MPI2_RAIDCONFIG0_PAGEVERSION; + mpi_request.Header.PageNumber = 0; + mpt2sas_base_build_zero_len_sge(ioc, &mpi_request.PageBufferSGE); + r = _config_request(ioc, &mpi_request, &mpi_reply, + MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT); + if (r) + goto out; + + mpi_request.PageAddress = + cpu_to_le32(MPI2_RAID_PGAD_FORM_ACTIVE_CONFIG); + mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT; + mpi_request.Header.PageVersion = mpi_reply.Header.PageVersion; + mpi_request.Header.PageNumber = mpi_reply.Header.PageNumber; + mpi_request.Header.PageType = mpi_reply.Header.PageType; + mpi_request.ExtPageLength = mpi_reply.ExtPageLength; + mpi_request.ExtPageType = mpi_reply.ExtPageType; + mem.config_page_sz = le16_to_cpu(mpi_reply.ExtPageLength) * 4; + if (mem.config_page_sz > ioc->config_page_sz) { + r = _config_alloc_config_dma_memory(ioc, &mem); + if (r) + goto out; + } else { + mem.config_page_dma = ioc->config_page_dma; + mem.config_page = ioc->config_page; + } + ioc->base_add_sg_single(&mpi_request.PageBufferSGE, + MPT2_CONFIG_COMMON_SGLFLAGS | mem.config_page_sz, + mem.config_page_dma); + r = _config_request(ioc, &mpi_request, &mpi_reply, + MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT); + if (r) + goto out; + + r = -1; + ioc_status = le16_to_cpu(mpi_reply.IOCStatus) & MPI2_IOCSTATUS_MASK; + if (ioc_status != MPI2_IOCSTATUS_SUCCESS) + goto done; + config_page = mem.config_page; + for (i = 0; i < config_page->NumElements; i++) { + if ((config_page->ConfigElement[i].ElementFlags & + MPI2_RAIDCONFIG0_EFLAGS_MASK_ELEMENT_TYPE) != + MPI2_RAIDCONFIG0_EFLAGS_VOL_PHYS_DISK_ELEMENT) + continue; + if (config_page->ConfigElement[i].PhysDiskDevHandle == + pd_handle) { + *volume_handle = le16_to_cpu(config_page-> + ConfigElement[i].VolDevHandle); + r = 0; + goto done; + } + } + + done: + if (mem.config_page_sz > ioc->config_page_sz) + _config_free_config_dma_memory(ioc, &mem); + + out: + mutex_unlock(&ioc->config_cmds.mutex); + return r; +} + +/** + * mpt2sas_config_get_volume_wwid - returns wwid given the volume handle + * @ioc: per adapter object + * @volume_handle: volume handle + * @wwid: volume wwid + * Context: sleep. + * + * Returns 0 for success, non-zero for failure. + */ +int +mpt2sas_config_get_volume_wwid(struct MPT2SAS_ADAPTER *ioc, u16 volume_handle, + u64 *wwid) +{ + Mpi2ConfigReply_t mpi_reply; + Mpi2RaidVolPage1_t raid_vol_pg1; + + *wwid = 0; + if (!(mpt2sas_config_get_raid_volume_pg1(ioc, &mpi_reply, + &raid_vol_pg1, MPI2_RAID_VOLUME_PGAD_FORM_HANDLE, + volume_handle))) { + *wwid = le64_to_cpu(raid_vol_pg1.WWID); + return 0; + } else + return -1; +} diff --git a/drivers/scsi/mpt2sas/mpt2sas_ctl.c b/drivers/scsi/mpt2sas/mpt2sas_ctl.c new file mode 100644 index 0000000..4fbe3f8 --- /dev/null +++ b/drivers/scsi/mpt2sas/mpt2sas_ctl.c @@ -0,0 +1,2516 @@ +/* + * Management Module Support for MPT (Message Passing Technology) based + * controllers + * + * This code is based on drivers/scsi/mpt2sas/mpt2_ctl.c + * Copyright (C) 2007-2008 LSI Corporation + * (mailto:DL-MPTFusionLinux@lsi.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * NO WARRANTY + * THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR + * CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT + * LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT, + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is + * solely responsible for determining the appropriateness of using and + * distributing the Program and assumes all risks associated with its + * exercise of rights under this Agreement, including but not limited to + * the risks and costs of program errors, damage to or loss of data, + * programs or equipment, and unavailability or interruption of operations. + + * DISCLAIMER OF LIABILITY + * NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR + * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE + * USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED + * HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES + + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, + * USA. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +#include "mpt2sas_base.h" +#include "mpt2sas_ctl.h" + +static struct fasync_struct *async_queue; +static DECLARE_WAIT_QUEUE_HEAD(ctl_poll_wait); + +/** + * enum block_state - blocking state + * @NON_BLOCKING: non blocking + * @BLOCKING: blocking + * + * These states are for ioctls that need to wait for a response + * from firmware, so they probably require sleep. + */ +enum block_state { + NON_BLOCKING, + BLOCKING, +}; + +#ifdef CONFIG_SCSI_MPT2SAS_LOGGING +/** + * _ctl_display_some_debug - debug routine + * @ioc: per adapter object + * @smid: system request message index + * @calling_function_name: string pass from calling function + * @mpi_reply: reply message frame + * Context: none. + * + * Function for displaying debug info helpfull when debugging issues + * in this module. + */ +static void +_ctl_display_some_debug(struct MPT2SAS_ADAPTER *ioc, u16 smid, + char *calling_function_name, MPI2DefaultReply_t *mpi_reply) +{ + Mpi2ConfigRequest_t *mpi_request; + char *desc = NULL; + + if (!(ioc->logging_level & MPT_DEBUG_IOCTL)) + return; + + mpi_request = mpt2sas_base_get_msg_frame(ioc, smid); + switch (mpi_request->Function) { + case MPI2_FUNCTION_SCSI_IO_REQUEST: + { + Mpi2SCSIIORequest_t *scsi_request = + (Mpi2SCSIIORequest_t *)mpi_request; + + snprintf(ioc->tmp_string, MPT_STRING_LENGTH, + "scsi_io, cmd(0x%02x), cdb_len(%d)", + scsi_request->CDB.CDB32[0], + le16_to_cpu(scsi_request->IoFlags) & 0xF); + desc = ioc->tmp_string; + break; + } + case MPI2_FUNCTION_SCSI_TASK_MGMT: + desc = "task_mgmt"; + break; + case MPI2_FUNCTION_IOC_INIT: + desc = "ioc_init"; + break; + case MPI2_FUNCTION_IOC_FACTS: + desc = "ioc_facts"; + break; + case MPI2_FUNCTION_CONFIG: + { + Mpi2ConfigRequest_t *config_request = + (Mpi2ConfigRequest_t *)mpi_request; + + snprintf(ioc->tmp_string, MPT_STRING_LENGTH, + "config, type(0x%02x), ext_type(0x%02x), number(%d)", + (config_request->Header.PageType & + MPI2_CONFIG_PAGETYPE_MASK), config_request->ExtPageType, + config_request->Header.PageNumber); + desc = ioc->tmp_string; + break; + } + case MPI2_FUNCTION_PORT_FACTS: + desc = "port_facts"; + break; + case MPI2_FUNCTION_PORT_ENABLE: + desc = "port_enable"; + break; + case MPI2_FUNCTION_EVENT_NOTIFICATION: + desc = "event_notification"; + break; + case MPI2_FUNCTION_FW_DOWNLOAD: + desc = "fw_download"; + break; + case MPI2_FUNCTION_FW_UPLOAD: + desc = "fw_upload"; + break; + case MPI2_FUNCTION_RAID_ACTION: + desc = "raid_action"; + break; + case MPI2_FUNCTION_RAID_SCSI_IO_PASSTHROUGH: + { + Mpi2SCSIIORequest_t *scsi_request = + (Mpi2SCSIIORequest_t *)mpi_request; + + snprintf(ioc->tmp_string, MPT_STRING_LENGTH, + "raid_pass, cmd(0x%02x), cdb_len(%d)", + scsi_request->CDB.CDB32[0], + le16_to_cpu(scsi_request->IoFlags) & 0xF); + desc = ioc->tmp_string; + break; + } + case MPI2_FUNCTION_SAS_IO_UNIT_CONTROL: + desc = "sas_iounit_cntl"; + break; + case MPI2_FUNCTION_SATA_PASSTHROUGH: + desc = "sata_pass"; + break; + case MPI2_FUNCTION_DIAG_BUFFER_POST: + desc = "diag_buffer_post"; + break; + case MPI2_FUNCTION_DIAG_RELEASE: + desc = "diag_release"; + break; + case MPI2_FUNCTION_SMP_PASSTHROUGH: + desc = "smp_passthrough"; + break; + } + + if (!desc) + return; + + printk(MPT2SAS_DEBUG_FMT "%s: %s, smid(%d)\n", + ioc->name, calling_function_name, desc, smid); + + if (!mpi_reply) + return; + + if (mpi_reply->IOCStatus || mpi_reply->IOCLogInfo) + printk(MPT2SAS_DEBUG_FMT + "\tiocstatus(0x%04x), loginfo(0x%08x)\n", + ioc->name, le16_to_cpu(mpi_reply->IOCStatus), + le32_to_cpu(mpi_reply->IOCLogInfo)); + + if (mpi_request->Function == MPI2_FUNCTION_SCSI_IO_REQUEST || + mpi_request->Function == + MPI2_FUNCTION_RAID_SCSI_IO_PASSTHROUGH) { + Mpi2SCSIIOReply_t *scsi_reply = + (Mpi2SCSIIOReply_t *)mpi_reply; + if (scsi_reply->SCSIState || scsi_reply->SCSIStatus) + printk(MPT2SAS_DEBUG_FMT + "\tscsi_state(0x%02x), scsi_status" + "(0x%02x)\n", ioc->name, + scsi_reply->SCSIState, + scsi_reply->SCSIStatus); + } +} +#endif + +/** + * mpt2sas_ctl_done - ctl module completion routine + * @ioc: per adapter object + * @smid: system request message index + * @VF_ID: virtual function id + * @reply: reply message frame(lower 32bit addr) + * Context: none. + * + * The callback handler when using ioc->ctl_cb_idx. + * + * Return nothing. + */ +void +mpt2sas_ctl_done(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 VF_ID, u32 reply) +{ + MPI2DefaultReply_t *mpi_reply; + + if (ioc->ctl_cmds.status == MPT2_CMD_NOT_USED) + return; + if (ioc->ctl_cmds.smid != smid) + return; + ioc->ctl_cmds.status |= MPT2_CMD_COMPLETE; + mpi_reply = mpt2sas_base_get_reply_virt_addr(ioc, reply); + if (mpi_reply) { + memcpy(ioc->ctl_cmds.reply, mpi_reply, mpi_reply->MsgLength*4); + ioc->ctl_cmds.status |= MPT2_CMD_REPLY_VALID; + } +#ifdef CONFIG_SCSI_MPT2SAS_LOGGING + _ctl_display_some_debug(ioc, smid, "ctl_done", mpi_reply); +#endif + ioc->ctl_cmds.status &= ~MPT2_CMD_PENDING; + complete(&ioc->ctl_cmds.done); +} + +/** + * _ctl_check_event_type - determines when an event needs logging + * @ioc: per adapter object + * @event: firmware event + * + * The bitmask in ioc->event_type[] indicates which events should be + * be saved in the driver event_log. This bitmask is set by application. + * + * Returns 1 when event should be captured, or zero means no match. + */ +static int +_ctl_check_event_type(struct MPT2SAS_ADAPTER *ioc, u16 event) +{ + u16 i; + u32 desired_event; + + if (event >= 128 || !event || !ioc->event_log) + return 0; + + desired_event = (1 << (event % 32)); + if (!desired_event) + desired_event = 1; + i = event / 32; + return desired_event & ioc->event_type[i]; +} + +/** + * mpt2sas_ctl_add_to_event_log - add event + * @ioc: per adapter object + * @mpi_reply: reply message frame + * + * Return nothing. + */ +void +mpt2sas_ctl_add_to_event_log(struct MPT2SAS_ADAPTER *ioc, + Mpi2EventNotificationReply_t *mpi_reply) +{ + struct MPT2_IOCTL_EVENTS *event_log; + u16 event; + int i; + u32 sz, event_data_sz; + u8 send_aen = 0; + + if (!ioc->event_log) + return; + + event = le16_to_cpu(mpi_reply->Event); + + if (_ctl_check_event_type(ioc, event)) { + + /* insert entry into circular event_log */ + i = ioc->event_context % MPT2SAS_CTL_EVENT_LOG_SIZE; + event_log = ioc->event_log; + event_log[i].event = event; + event_log[i].context = ioc->event_context++; + + event_data_sz = le16_to_cpu(mpi_reply->EventDataLength)*4; + sz = min_t(u32, event_data_sz, MPT2_EVENT_DATA_SIZE); + memset(event_log[i].data, 0, MPT2_EVENT_DATA_SIZE); + memcpy(event_log[i].data, mpi_reply->EventData, sz); + send_aen = 1; + } + + /* This aen_event_read_flag flag is set until the + * application has read the event log. + * For MPI2_EVENT_LOG_ENTRY_ADDED, we always notify. + */ + if (event == MPI2_EVENT_LOG_ENTRY_ADDED || + (send_aen && !ioc->aen_event_read_flag)) { + ioc->aen_event_read_flag = 1; + wake_up_interruptible(&ctl_poll_wait); + if (async_queue) + kill_fasync(&async_queue, SIGIO, POLL_IN); + } +} + +/** + * mpt2sas_ctl_event_callback - firmware event handler (called at ISR time) + * @ioc: per adapter object + * @VF_ID: virtual function id + * @reply: reply message frame(lower 32bit addr) + * Context: interrupt. + * + * This function merely adds a new work task into ioc->firmware_event_thread. + * The tasks are worked from _firmware_event_work in user context. + * + * Return nothing. + */ +void +mpt2sas_ctl_event_callback(struct MPT2SAS_ADAPTER *ioc, u8 VF_ID, u32 reply) +{ + Mpi2EventNotificationReply_t *mpi_reply; + + mpi_reply = mpt2sas_base_get_reply_virt_addr(ioc, reply); + mpt2sas_ctl_add_to_event_log(ioc, mpi_reply); +} + +/** + * _ctl_verify_adapter - validates ioc_number passed from application + * @ioc: per adapter object + * @iocpp: The ioc pointer is returned in this. + * + * Return (-1) means error, else ioc_number. + */ +static int +_ctl_verify_adapter(int ioc_number, struct MPT2SAS_ADAPTER **iocpp) +{ + struct MPT2SAS_ADAPTER *ioc; + + list_for_each_entry(ioc, &ioc_list, list) { + if (ioc->id != ioc_number) + continue; + *iocpp = ioc; + return ioc_number; + } + *iocpp = NULL; + return -1; +} + +/** + * mpt2sas_ctl_reset_handler - reset callback handler (for ctl) + * @ioc: per adapter object + * @reset_phase: phase + * + * The handler for doing any required cleanup or initialization. + * + * The reset phase can be MPT2_IOC_PRE_RESET, MPT2_IOC_AFTER_RESET, + * MPT2_IOC_DONE_RESET + */ +void +mpt2sas_ctl_reset_handler(struct MPT2SAS_ADAPTER *ioc, int reset_phase) +{ + switch (reset_phase) { + case MPT2_IOC_PRE_RESET: + dtmprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s: " + "MPT2_IOC_PRE_RESET\n", ioc->name, __func__)); + break; + case MPT2_IOC_AFTER_RESET: + dtmprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s: " + "MPT2_IOC_AFTER_RESET\n", ioc->name, __func__)); + if (ioc->ctl_cmds.status & MPT2_CMD_PENDING) { + ioc->ctl_cmds.status |= MPT2_CMD_RESET; + mpt2sas_base_free_smid(ioc, ioc->ctl_cmds.smid); + complete(&ioc->ctl_cmds.done); + } + break; + case MPT2_IOC_DONE_RESET: + dtmprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s: " + "MPT2_IOC_DONE_RESET\n", ioc->name, __func__)); + break; + } +} + +/** + * _ctl_fasync - + * @fd - + * @filep - + * @mode - + * + * Called when application request fasyn callback handler. + */ +static int +_ctl_fasync(int fd, struct file *filep, int mode) +{ + return fasync_helper(fd, filep, mode, &async_queue); +} + +/** + * _ctl_release - + * @inode - + * @filep - + * + * Called when application releases the fasyn callback handler. + */ +static int +_ctl_release(struct inode *inode, struct file *filep) +{ + return fasync_helper(-1, filep, 0, &async_queue); +} + +/** + * _ctl_poll - + * @file - + * @wait - + * + */ +static unsigned int +_ctl_poll(struct file *filep, poll_table *wait) +{ + struct MPT2SAS_ADAPTER *ioc; + + poll_wait(filep, &ctl_poll_wait, wait); + + list_for_each_entry(ioc, &ioc_list, list) { + if (ioc->aen_event_read_flag) + return POLLIN | POLLRDNORM; + } + return 0; +} + +/** + * _ctl_do_task_abort - assign an active smid to the abort_task + * @ioc: per adapter object + * @karg - (struct mpt2_ioctl_command) + * @tm_request - pointer to mf from user space + * + * Returns 0 when an smid if found, else fail. + * during failure, the reply frame is filled. + */ +static int +_ctl_do_task_abort(struct MPT2SAS_ADAPTER *ioc, struct mpt2_ioctl_command *karg, + Mpi2SCSITaskManagementRequest_t *tm_request) +{ + u8 found = 0; + u16 i; + u16 handle; + struct scsi_cmnd *scmd; + struct MPT2SAS_DEVICE *priv_data; + unsigned long flags; + Mpi2SCSITaskManagementReply_t *tm_reply; + u32 sz; + u32 lun; + + lun = scsilun_to_int((struct scsi_lun *)tm_request->LUN); + + handle = le16_to_cpu(tm_request->DevHandle); + spin_lock_irqsave(&ioc->scsi_lookup_lock, flags); + for (i = ioc->request_depth; i && !found; i--) { + scmd = ioc->scsi_lookup[i - 1].scmd; + if (scmd == NULL || scmd->device == NULL || + scmd->device->hostdata == NULL) + continue; + if (lun != scmd->device->lun) + continue; + priv_data = scmd->device->hostdata; + if (priv_data->sas_target == NULL) + continue; + if (priv_data->sas_target->handle != handle) + continue; + tm_request->TaskMID = cpu_to_le16(ioc->scsi_lookup[i - 1].smid); + found = 1; + } + spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags); + + if (!found) { + dctlprintk(ioc, printk(MPT2SAS_DEBUG_FMT "ABORT_TASK: " + "DevHandle(0x%04x), lun(%d), no active mid!!\n", ioc->name, + tm_request->DevHandle, lun)); + tm_reply = ioc->ctl_cmds.reply; + tm_reply->DevHandle = tm_request->DevHandle; + tm_reply->Function = MPI2_FUNCTION_SCSI_TASK_MGMT; + tm_reply->TaskType = MPI2_SCSITASKMGMT_TASKTYPE_ABORT_TASK; + tm_reply->MsgLength = sizeof(Mpi2SCSITaskManagementReply_t)/4; + tm_reply->VP_ID = tm_request->VP_ID; + tm_reply->VF_ID = tm_request->VF_ID; + sz = min_t(u32, karg->max_reply_bytes, ioc->reply_sz); + if (copy_to_user(karg->reply_frame_buf_ptr, ioc->ctl_cmds.reply, + sz)) + printk(KERN_ERR "failure at %s:%d/%s()!\n", __FILE__, + __LINE__, __func__); + return 1; + } + + dctlprintk(ioc, printk(MPT2SAS_DEBUG_FMT "ABORT_TASK: " + "DevHandle(0x%04x), lun(%d), smid(%d)\n", ioc->name, + tm_request->DevHandle, lun, tm_request->TaskMID)); + return 0; +} + +/** + * _ctl_do_mpt_command - main handler for MPT2COMMAND opcode + * @ioc: per adapter object + * @karg - (struct mpt2_ioctl_command) + * @mf - pointer to mf in user space + * @state - NON_BLOCKING or BLOCKING + */ +static long +_ctl_do_mpt_command(struct MPT2SAS_ADAPTER *ioc, + struct mpt2_ioctl_command karg, void __user *mf, enum block_state state) +{ + MPI2RequestHeader_t *mpi_request; + MPI2DefaultReply_t *mpi_reply; + u32 ioc_state; + u16 ioc_status; + u16 smid; + unsigned long timeout, timeleft; + u8 issue_reset; + u32 sz; + void *psge; + void *priv_sense = NULL; + void *data_out = NULL; + dma_addr_t data_out_dma; + size_t data_out_sz = 0; + void *data_in = NULL; + dma_addr_t data_in_dma; + size_t data_in_sz = 0; + u32 sgl_flags; + long ret; + u16 wait_state_count; + + issue_reset = 0; + + if (state == NON_BLOCKING && !mutex_trylock(&ioc->ctl_cmds.mutex)) + return -EAGAIN; + else if (mutex_lock_interruptible(&ioc->ctl_cmds.mutex)) + return -ERESTARTSYS; + + if (ioc->ctl_cmds.status != MPT2_CMD_NOT_USED) { + printk(MPT2SAS_ERR_FMT "%s: ctl_cmd in use\n", + ioc->name, __func__); + ret = -EAGAIN; + goto out; + } + + wait_state_count = 0; + ioc_state = mpt2sas_base_get_iocstate(ioc, 1); + while (ioc_state != MPI2_IOC_STATE_OPERATIONAL) { + if (wait_state_count++ == 10) { + printk(MPT2SAS_ERR_FMT + "%s: failed due to ioc not operational\n", + ioc->name, __func__); + ret = -EFAULT; + goto out; + } + ssleep(1); + ioc_state = mpt2sas_base_get_iocstate(ioc, 1); + printk(MPT2SAS_INFO_FMT "%s: waiting for " + "operational state(count=%d)\n", ioc->name, + __func__, wait_state_count); + } + if (wait_state_count) + printk(MPT2SAS_INFO_FMT "%s: ioc is operational\n", + ioc->name, __func__); + + smid = mpt2sas_base_get_smid(ioc, ioc->ctl_cb_idx); + if (!smid) { + printk(MPT2SAS_ERR_FMT "%s: failed obtaining a smid\n", + ioc->name, __func__); + ret = -EAGAIN; + goto out; + } + + ret = 0; + ioc->ctl_cmds.status = MPT2_CMD_PENDING; + memset(ioc->ctl_cmds.reply, 0, ioc->reply_sz); + mpi_request = mpt2sas_base_get_msg_frame(ioc, smid); + ioc->ctl_cmds.smid = smid; + data_out_sz = karg.data_out_size; + data_in_sz = karg.data_in_size; + + /* copy in request message frame from user */ + if (copy_from_user(mpi_request, mf, karg.data_sge_offset*4)) { + printk(KERN_ERR "failure at %s:%d/%s()!\n", __FILE__, __LINE__, + __func__); + ret = -EFAULT; + mpt2sas_base_free_smid(ioc, smid); + goto out; + } + + if (mpi_request->Function == MPI2_FUNCTION_SCSI_IO_REQUEST || + mpi_request->Function == MPI2_FUNCTION_RAID_SCSI_IO_PASSTHROUGH) { + if (!mpi_request->FunctionDependent1 || + mpi_request->FunctionDependent1 > + cpu_to_le16(ioc->facts.MaxDevHandle)) { + ret = -EINVAL; + mpt2sas_base_free_smid(ioc, smid); + goto out; + } + } + + /* obtain dma-able memory for data transfer */ + if (data_out_sz) /* WRITE */ { + data_out = pci_alloc_consistent(ioc->pdev, data_out_sz, + &data_out_dma); + if (!data_out) { + printk(KERN_ERR "failure at %s:%d/%s()!\n", __FILE__, + __LINE__, __func__); + ret = -ENOMEM; + mpt2sas_base_free_smid(ioc, smid); + goto out; + } + if (copy_from_user(data_out, karg.data_out_buf_ptr, + data_out_sz)) { + printk(KERN_ERR "failure at %s:%d/%s()!\n", __FILE__, + __LINE__, __func__); + ret = -EFAULT; + mpt2sas_base_free_smid(ioc, smid); + goto out; + } + } + + if (data_in_sz) /* READ */ { + data_in = pci_alloc_consistent(ioc->pdev, data_in_sz, + &data_in_dma); + if (!data_in) { + printk(KERN_ERR "failure at %s:%d/%s()!\n", __FILE__, + __LINE__, __func__); + ret = -ENOMEM; + mpt2sas_base_free_smid(ioc, smid); + goto out; + } + } + + /* add scatter gather elements */ + psge = (void *)mpi_request + (karg.data_sge_offset*4); + + if (!data_out_sz && !data_in_sz) { + mpt2sas_base_build_zero_len_sge(ioc, psge); + } else if (data_out_sz && data_in_sz) { + /* WRITE sgel first */ + sgl_flags = (MPI2_SGE_FLAGS_SIMPLE_ELEMENT | + MPI2_SGE_FLAGS_END_OF_BUFFER | MPI2_SGE_FLAGS_HOST_TO_IOC); + sgl_flags = sgl_flags << MPI2_SGE_FLAGS_SHIFT; + ioc->base_add_sg_single(psge, sgl_flags | + data_out_sz, data_out_dma); + + /* incr sgel */ + psge += ioc->sge_size; + + /* READ sgel last */ + sgl_flags = (MPI2_SGE_FLAGS_SIMPLE_ELEMENT | + MPI2_SGE_FLAGS_LAST_ELEMENT | MPI2_SGE_FLAGS_END_OF_BUFFER | + MPI2_SGE_FLAGS_END_OF_LIST); + sgl_flags = sgl_flags << MPI2_SGE_FLAGS_SHIFT; + ioc->base_add_sg_single(psge, sgl_flags | + data_in_sz, data_in_dma); + } else if (data_out_sz) /* WRITE */ { + sgl_flags = (MPI2_SGE_FLAGS_SIMPLE_ELEMENT | + MPI2_SGE_FLAGS_LAST_ELEMENT | MPI2_SGE_FLAGS_END_OF_BUFFER | + MPI2_SGE_FLAGS_END_OF_LIST | MPI2_SGE_FLAGS_HOST_TO_IOC); + sgl_flags = sgl_flags << MPI2_SGE_FLAGS_SHIFT; + ioc->base_add_sg_single(psge, sgl_flags | + data_out_sz, data_out_dma); + } else if (data_in_sz) /* READ */ { + sgl_flags = (MPI2_SGE_FLAGS_SIMPLE_ELEMENT | + MPI2_SGE_FLAGS_LAST_ELEMENT | MPI2_SGE_FLAGS_END_OF_BUFFER | + MPI2_SGE_FLAGS_END_OF_LIST); + sgl_flags = sgl_flags << MPI2_SGE_FLAGS_SHIFT; + ioc->base_add_sg_single(psge, sgl_flags | + data_in_sz, data_in_dma); + } + + /* send command to firmware */ +#ifdef CONFIG_SCSI_MPT2SAS_LOGGING + _ctl_display_some_debug(ioc, smid, "ctl_request", NULL); +#endif + + switch (mpi_request->Function) { + case MPI2_FUNCTION_SCSI_IO_REQUEST: + case MPI2_FUNCTION_RAID_SCSI_IO_PASSTHROUGH: + { + Mpi2SCSIIORequest_t *scsiio_request = + (Mpi2SCSIIORequest_t *)mpi_request; + scsiio_request->SenseBufferLowAddress = + (u32)mpt2sas_base_get_sense_buffer_dma(ioc, smid); + priv_sense = mpt2sas_base_get_sense_buffer(ioc, smid); + memset(priv_sense, 0, SCSI_SENSE_BUFFERSIZE); + mpt2sas_base_put_smid_scsi_io(ioc, smid, 0, + le16_to_cpu(mpi_request->FunctionDependent1)); + break; + } + case MPI2_FUNCTION_SCSI_TASK_MGMT: + { + Mpi2SCSITaskManagementRequest_t *tm_request = + (Mpi2SCSITaskManagementRequest_t *)mpi_request; + + if (tm_request->TaskType == + MPI2_SCSITASKMGMT_TASKTYPE_ABORT_TASK) { + if (_ctl_do_task_abort(ioc, &karg, tm_request)) + goto out; + } + + mutex_lock(&ioc->tm_cmds.mutex); + mpt2sas_scsih_set_tm_flag(ioc, le16_to_cpu( + tm_request->DevHandle)); + mpt2sas_base_put_smid_hi_priority(ioc, smid, + mpi_request->VF_ID); + break; + } + case MPI2_FUNCTION_SMP_PASSTHROUGH: + { + Mpi2SmpPassthroughRequest_t *smp_request = + (Mpi2SmpPassthroughRequest_t *)mpi_request; + u8 *data; + + /* ioc determines which port to use */ + smp_request->PhysicalPort = 0xFF; + if (smp_request->PassthroughFlags & + MPI2_SMP_PT_REQ_PT_FLAGS_IMMEDIATE) + data = (u8 *)&smp_request->SGL; + else + data = data_out; + + if (data[1] == 0x91 && (data[10] == 1 || data[10] == 2)) { + ioc->ioc_link_reset_in_progress = 1; + ioc->ignore_loginfos = 1; + } + mpt2sas_base_put_smid_default(ioc, smid, mpi_request->VF_ID); + break; + } + case MPI2_FUNCTION_SAS_IO_UNIT_CONTROL: + { + Mpi2SasIoUnitControlRequest_t *sasiounit_request = + (Mpi2SasIoUnitControlRequest_t *)mpi_request; + + if (sasiounit_request->Operation == MPI2_SAS_OP_PHY_HARD_RESET + || sasiounit_request->Operation == + MPI2_SAS_OP_PHY_LINK_RESET) { + ioc->ioc_link_reset_in_progress = 1; + ioc->ignore_loginfos = 1; + } + mpt2sas_base_put_smid_default(ioc, smid, mpi_request->VF_ID); + break; + } + default: + mpt2sas_base_put_smid_default(ioc, smid, mpi_request->VF_ID); + break; + } + + if (karg.timeout < MPT2_IOCTL_DEFAULT_TIMEOUT) + timeout = MPT2_IOCTL_DEFAULT_TIMEOUT; + else + timeout = karg.timeout; + timeleft = wait_for_completion_timeout(&ioc->ctl_cmds.done, + timeout*HZ); + if (mpi_request->Function == MPI2_FUNCTION_SCSI_TASK_MGMT) { + Mpi2SCSITaskManagementRequest_t *tm_request = + (Mpi2SCSITaskManagementRequest_t *)mpi_request; + mutex_unlock(&ioc->tm_cmds.mutex); + mpt2sas_scsih_clear_tm_flag(ioc, le16_to_cpu( + tm_request->DevHandle)); + } else if ((mpi_request->Function == MPI2_FUNCTION_SMP_PASSTHROUGH || + mpi_request->Function == MPI2_FUNCTION_SAS_IO_UNIT_CONTROL) && + ioc->ioc_link_reset_in_progress) { + ioc->ioc_link_reset_in_progress = 0; + ioc->ignore_loginfos = 0; + } + if (!(ioc->ctl_cmds.status & MPT2_CMD_COMPLETE)) { + printk(MPT2SAS_ERR_FMT "%s: timeout\n", ioc->name, + __func__); + _debug_dump_mf(mpi_request, karg.data_sge_offset); + if (!(ioc->ctl_cmds.status & MPT2_CMD_RESET)) + issue_reset = 1; + goto issue_host_reset; + } + + mpi_reply = ioc->ctl_cmds.reply; + ioc_status = le16_to_cpu(mpi_reply->IOCStatus) & MPI2_IOCSTATUS_MASK; + +#ifdef CONFIG_SCSI_MPT2SAS_LOGGING + if (mpi_reply->Function == MPI2_FUNCTION_SCSI_TASK_MGMT && + (ioc->logging_level & MPT_DEBUG_TM)) { + Mpi2SCSITaskManagementReply_t *tm_reply = + (Mpi2SCSITaskManagementReply_t *)mpi_reply; + + printk(MPT2SAS_DEBUG_FMT "TASK_MGMT: " + "IOCStatus(0x%04x), IOCLogInfo(0x%08x), " + "TerminationCount(0x%08x)\n", ioc->name, + tm_reply->IOCStatus, tm_reply->IOCLogInfo, + tm_reply->TerminationCount); + } +#endif + /* copy out xdata to user */ + if (data_in_sz) { + if (copy_to_user(karg.data_in_buf_ptr, data_in, + data_in_sz)) { + printk(KERN_ERR "failure at %s:%d/%s()!\n", __FILE__, + __LINE__, __func__); + ret = -ENODATA; + goto out; + } + } + + /* copy out reply message frame to user */ + if (karg.max_reply_bytes) { + sz = min_t(u32, karg.max_reply_bytes, ioc->reply_sz); + if (copy_to_user(karg.reply_frame_buf_ptr, ioc->ctl_cmds.reply, + sz)) { + printk(KERN_ERR "failure at %s:%d/%s()!\n", __FILE__, + __LINE__, __func__); + ret = -ENODATA; + goto out; + } + } + + /* copy out sense to user */ + if (karg.max_sense_bytes && (mpi_request->Function == + MPI2_FUNCTION_SCSI_IO_REQUEST || mpi_request->Function == + MPI2_FUNCTION_RAID_SCSI_IO_PASSTHROUGH)) { + sz = min_t(u32, karg.max_sense_bytes, SCSI_SENSE_BUFFERSIZE); + if (copy_to_user(karg.sense_data_ptr, priv_sense, sz)) { + printk(KERN_ERR "failure at %s:%d/%s()!\n", __FILE__, + __LINE__, __func__); + ret = -ENODATA; + goto out; + } + } + + issue_host_reset: + if (issue_reset) { + if ((mpi_request->Function == MPI2_FUNCTION_SCSI_IO_REQUEST || + mpi_request->Function == + MPI2_FUNCTION_RAID_SCSI_IO_PASSTHROUGH)) { + printk(MPT2SAS_INFO_FMT "issue target reset: handle " + "= (0x%04x)\n", ioc->name, + mpi_request->FunctionDependent1); + mutex_lock(&ioc->tm_cmds.mutex); + mpt2sas_scsih_issue_tm(ioc, + mpi_request->FunctionDependent1, 0, + MPI2_SCSITASKMGMT_TASKTYPE_TARGET_RESET, 0, 10); + ioc->tm_cmds.status = MPT2_CMD_NOT_USED; + mutex_unlock(&ioc->tm_cmds.mutex); + } else + mpt2sas_base_hard_reset_handler(ioc, CAN_SLEEP, + FORCE_BIG_HAMMER); + } + + out: + + /* free memory associated with sg buffers */ + if (data_in) + pci_free_consistent(ioc->pdev, data_in_sz, data_in, + data_in_dma); + + if (data_out) + pci_free_consistent(ioc->pdev, data_out_sz, data_out, + data_out_dma); + + ioc->ctl_cmds.status = MPT2_CMD_NOT_USED; + mutex_unlock(&ioc->ctl_cmds.mutex); + return ret; +} + +/** + * _ctl_getiocinfo - main handler for MPT2IOCINFO opcode + * @arg - user space buffer containing ioctl content + */ +static long +_ctl_getiocinfo(void __user *arg) +{ + struct mpt2_ioctl_iocinfo karg; + struct MPT2SAS_ADAPTER *ioc; + u8 revision; + + if (copy_from_user(&karg, arg, sizeof(karg))) { + printk(KERN_ERR "failure at %s:%d/%s()!\n", + __FILE__, __LINE__, __func__); + return -EFAULT; + } + if (_ctl_verify_adapter(karg.hdr.ioc_number, &ioc) == -1 || !ioc) + return -ENODEV; + + dctlprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s: enter\n", ioc->name, + __func__)); + + memset(&karg, 0 , sizeof(karg)); + karg.adapter_type = MPT2_IOCTL_INTERFACE_SAS2; + if (ioc->pfacts) + karg.port_number = ioc->pfacts[0].PortNumber; + pci_read_config_byte(ioc->pdev, PCI_CLASS_REVISION, &revision); + karg.hw_rev = revision; + karg.pci_id = ioc->pdev->device; + karg.subsystem_device = ioc->pdev->subsystem_device; + karg.subsystem_vendor = ioc->pdev->subsystem_vendor; + karg.pci_information.u.bits.bus = ioc->pdev->bus->number; + karg.pci_information.u.bits.device = PCI_SLOT(ioc->pdev->devfn); + karg.pci_information.u.bits.function = PCI_FUNC(ioc->pdev->devfn); + karg.pci_information.segment_id = pci_domain_nr(ioc->pdev->bus); + karg.firmware_version = ioc->facts.FWVersion.Word; + strncpy(karg.driver_version, MPT2SAS_DRIVER_VERSION, + MPT2_IOCTL_VERSION_LENGTH); + karg.driver_version[MPT2_IOCTL_VERSION_LENGTH - 1] = '\0'; + karg.bios_version = le32_to_cpu(ioc->bios_pg3.BiosVersion); + + if (copy_to_user(arg, &karg, sizeof(karg))) { + printk(KERN_ERR "failure at %s:%d/%s()!\n", + __FILE__, __LINE__, __func__); + return -EFAULT; + } + return 0; +} + +/** + * _ctl_eventquery - main handler for MPT2EVENTQUERY opcode + * @arg - user space buffer containing ioctl content + */ +static long +_ctl_eventquery(void __user *arg) +{ + struct mpt2_ioctl_eventquery karg; + struct MPT2SAS_ADAPTER *ioc; + + if (copy_from_user(&karg, arg, sizeof(karg))) { + printk(KERN_ERR "failure at %s:%d/%s()!\n", + __FILE__, __LINE__, __func__); + return -EFAULT; + } + if (_ctl_verify_adapter(karg.hdr.ioc_number, &ioc) == -1 || !ioc) + return -ENODEV; + + dctlprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s: enter\n", ioc->name, + __func__)); + + karg.event_entries = MPT2SAS_CTL_EVENT_LOG_SIZE; + memcpy(karg.event_types, ioc->event_type, + MPI2_EVENT_NOTIFY_EVENTMASK_WORDS * sizeof(u32)); + + if (copy_to_user(arg, &karg, sizeof(karg))) { + printk(KERN_ERR "failure at %s:%d/%s()!\n", + __FILE__, __LINE__, __func__); + return -EFAULT; + } + return 0; +} + +/** + * _ctl_eventenable - main handler for MPT2EVENTENABLE opcode + * @arg - user space buffer containing ioctl content + */ +static long +_ctl_eventenable(void __user *arg) +{ + struct mpt2_ioctl_eventenable karg; + struct MPT2SAS_ADAPTER *ioc; + + if (copy_from_user(&karg, arg, sizeof(karg))) { + printk(KERN_ERR "failure at %s:%d/%s()!\n", + __FILE__, __LINE__, __func__); + return -EFAULT; + } + if (_ctl_verify_adapter(karg.hdr.ioc_number, &ioc) == -1 || !ioc) + return -ENODEV; + + dctlprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s: enter\n", ioc->name, + __func__)); + + if (ioc->event_log) + return 0; + memcpy(ioc->event_type, karg.event_types, + MPI2_EVENT_NOTIFY_EVENTMASK_WORDS * sizeof(u32)); + mpt2sas_base_validate_event_type(ioc, ioc->event_type); + + /* initialize event_log */ + ioc->event_context = 0; + ioc->aen_event_read_flag = 0; + ioc->event_log = kcalloc(MPT2SAS_CTL_EVENT_LOG_SIZE, + sizeof(struct MPT2_IOCTL_EVENTS), GFP_KERNEL); + if (!ioc->event_log) { + printk(KERN_ERR "failure at %s:%d/%s()!\n", + __FILE__, __LINE__, __func__); + return -ENOMEM; + } + return 0; +} + +/** + * _ctl_eventreport - main handler for MPT2EVENTREPORT opcode + * @arg - user space buffer containing ioctl content + */ +static long +_ctl_eventreport(void __user *arg) +{ + struct mpt2_ioctl_eventreport karg; + struct MPT2SAS_ADAPTER *ioc; + u32 number_bytes, max_events, max; + struct mpt2_ioctl_eventreport __user *uarg = arg; + + if (copy_from_user(&karg, arg, sizeof(karg))) { + printk(KERN_ERR "failure at %s:%d/%s()!\n", + __FILE__, __LINE__, __func__); + return -EFAULT; + } + if (_ctl_verify_adapter(karg.hdr.ioc_number, &ioc) == -1 || !ioc) + return -ENODEV; + + dctlprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s: enter\n", ioc->name, + __func__)); + + number_bytes = karg.hdr.max_data_size - + sizeof(struct mpt2_ioctl_header); + max_events = number_bytes/sizeof(struct MPT2_IOCTL_EVENTS); + max = min_t(u32, MPT2SAS_CTL_EVENT_LOG_SIZE, max_events); + + /* If fewer than 1 event is requested, there must have + * been some type of error. + */ + if (!max || !ioc->event_log) + return -ENODATA; + + number_bytes = max * sizeof(struct MPT2_IOCTL_EVENTS); + if (copy_to_user(uarg->event_data, ioc->event_log, number_bytes)) { + printk(KERN_ERR "failure at %s:%d/%s()!\n", + __FILE__, __LINE__, __func__); + return -EFAULT; + } + + /* reset flag so SIGIO can restart */ + ioc->aen_event_read_flag = 0; + return 0; +} + +/** + * _ctl_do_reset - main handler for MPT2HARDRESET opcode + * @arg - user space buffer containing ioctl content + */ +static long +_ctl_do_reset(void __user *arg) +{ + struct mpt2_ioctl_diag_reset karg; + struct MPT2SAS_ADAPTER *ioc; + int retval; + + if (copy_from_user(&karg, arg, sizeof(karg))) { + printk(KERN_ERR "failure at %s:%d/%s()!\n", + __FILE__, __LINE__, __func__); + return -EFAULT; + } + if (_ctl_verify_adapter(karg.hdr.ioc_number, &ioc) == -1 || !ioc) + return -ENODEV; + + dctlprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s: enter\n", ioc->name, + __func__)); + + retval = mpt2sas_base_hard_reset_handler(ioc, CAN_SLEEP, + FORCE_BIG_HAMMER); + printk(MPT2SAS_INFO_FMT "host reset: %s\n", + ioc->name, ((!retval) ? "SUCCESS" : "FAILED")); + return 0; +} + +/** + * _ctl_btdh_search_sas_device - searching for sas device + * @ioc: per adapter object + * @btdh: btdh ioctl payload + */ +static int +_ctl_btdh_search_sas_device(struct MPT2SAS_ADAPTER *ioc, + struct mpt2_ioctl_btdh_mapping *btdh) +{ + struct _sas_device *sas_device; + unsigned long flags; + int rc = 0; + + if (list_empty(&ioc->sas_device_list)) + return rc; + + spin_lock_irqsave(&ioc->sas_device_lock, flags); + list_for_each_entry(sas_device, &ioc->sas_device_list, list) { + if (btdh->bus == 0xFFFFFFFF && btdh->id == 0xFFFFFFFF && + btdh->handle == sas_device->handle) { + btdh->bus = sas_device->channel; + btdh->id = sas_device->id; + rc = 1; + goto out; + } else if (btdh->bus == sas_device->channel && btdh->id == + sas_device->id && btdh->handle == 0xFFFF) { + btdh->handle = sas_device->handle; + rc = 1; + goto out; + } + } + out: + spin_unlock_irqrestore(&ioc->sas_device_lock, flags); + return rc; +} + +/** + * _ctl_btdh_search_raid_device - searching for raid device + * @ioc: per adapter object + * @btdh: btdh ioctl payload + */ +static int +_ctl_btdh_search_raid_device(struct MPT2SAS_ADAPTER *ioc, + struct mpt2_ioctl_btdh_mapping *btdh) +{ + struct _raid_device *raid_device; + unsigned long flags; + int rc = 0; + + if (list_empty(&ioc->raid_device_list)) + return rc; + + spin_lock_irqsave(&ioc->raid_device_lock, flags); + list_for_each_entry(raid_device, &ioc->raid_device_list, list) { + if (btdh->bus == 0xFFFFFFFF && btdh->id == 0xFFFFFFFF && + btdh->handle == raid_device->handle) { + btdh->bus = raid_device->channel; + btdh->id = raid_device->id; + rc = 1; + goto out; + } else if (btdh->bus == raid_device->channel && btdh->id == + raid_device->id && btdh->handle == 0xFFFF) { + btdh->handle = raid_device->handle; + rc = 1; + goto out; + } + } + out: + spin_unlock_irqrestore(&ioc->raid_device_lock, flags); + return rc; +} + +/** + * _ctl_btdh_mapping - main handler for MPT2BTDHMAPPING opcode + * @arg - user space buffer containing ioctl content + */ +static long +_ctl_btdh_mapping(void __user *arg) +{ + struct mpt2_ioctl_btdh_mapping karg; + struct MPT2SAS_ADAPTER *ioc; + int rc; + + if (copy_from_user(&karg, arg, sizeof(karg))) { + printk(KERN_ERR "failure at %s:%d/%s()!\n", + __FILE__, __LINE__, __func__); + return -EFAULT; + } + if (_ctl_verify_adapter(karg.hdr.ioc_number, &ioc) == -1 || !ioc) + return -ENODEV; + + dctlprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s\n", ioc->name, + __func__)); + + rc = _ctl_btdh_search_sas_device(ioc, &karg); + if (!rc) + _ctl_btdh_search_raid_device(ioc, &karg); + + if (copy_to_user(arg, &karg, sizeof(karg))) { + printk(KERN_ERR "failure at %s:%d/%s()!\n", + __FILE__, __LINE__, __func__); + return -EFAULT; + } + return 0; +} + +/** + * _ctl_diag_capability - return diag buffer capability + * @ioc: per adapter object + * @buffer_type: specifies either TRACE or SNAPSHOT + * + * returns 1 when diag buffer support is enabled in firmware + */ +static u8 +_ctl_diag_capability(struct MPT2SAS_ADAPTER *ioc, u8 buffer_type) +{ + u8 rc = 0; + + switch (buffer_type) { + case MPI2_DIAG_BUF_TYPE_TRACE: + if (ioc->facts.IOCCapabilities & + MPI2_IOCFACTS_CAPABILITY_DIAG_TRACE_BUFFER) + rc = 1; + break; + case MPI2_DIAG_BUF_TYPE_SNAPSHOT: + if (ioc->facts.IOCCapabilities & + MPI2_IOCFACTS_CAPABILITY_SNAPSHOT_BUFFER) + rc = 1; + break; + } + + return rc; +} + +/** + * _ctl_diag_register - application register with driver + * @arg - user space buffer containing ioctl content + * @state - NON_BLOCKING or BLOCKING + * + * This will allow the driver to setup any required buffers that will be + * needed by firmware to communicate with the driver. + */ +static long +_ctl_diag_register(void __user *arg, enum block_state state) +{ + struct mpt2_diag_register karg; + struct MPT2SAS_ADAPTER *ioc; + int rc, i; + void *request_data = NULL; + dma_addr_t request_data_dma; + u32 request_data_sz = 0; + Mpi2DiagBufferPostRequest_t *mpi_request; + Mpi2DiagBufferPostReply_t *mpi_reply; + u8 buffer_type; + unsigned long timeleft; + u16 smid; + u16 ioc_status; + u8 issue_reset = 0; + + if (copy_from_user(&karg, arg, sizeof(karg))) { + printk(KERN_ERR "failure at %s:%d/%s()!\n", + __FILE__, __LINE__, __func__); + return -EFAULT; + } + if (_ctl_verify_adapter(karg.hdr.ioc_number, &ioc) == -1 || !ioc) + return -ENODEV; + + dctlprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s\n", ioc->name, + __func__)); + + buffer_type = karg.buffer_type; + if (!_ctl_diag_capability(ioc, buffer_type)) { + printk(MPT2SAS_ERR_FMT "%s: doesn't have capability for " + "buffer_type(0x%02x)\n", ioc->name, __func__, buffer_type); + return -EPERM; + } + + if (ioc->diag_buffer_status[buffer_type] & + MPT2_DIAG_BUFFER_IS_REGISTERED) { + printk(MPT2SAS_ERR_FMT "%s: already has a registered " + "buffer for buffer_type(0x%02x)\n", ioc->name, __func__, + buffer_type); + return -EINVAL; + } + + if (karg.requested_buffer_size % 4) { + printk(MPT2SAS_ERR_FMT "%s: the requested_buffer_size " + "is not 4 byte aligned\n", ioc->name, __func__); + return -EINVAL; + } + + if (state == NON_BLOCKING && !mutex_trylock(&ioc->ctl_cmds.mutex)) + return -EAGAIN; + else if (mutex_lock_interruptible(&ioc->ctl_cmds.mutex)) + return -ERESTARTSYS; + + if (ioc->ctl_cmds.status != MPT2_CMD_NOT_USED) { + printk(MPT2SAS_ERR_FMT "%s: ctl_cmd in use\n", + ioc->name, __func__); + rc = -EAGAIN; + goto out; + } + + smid = mpt2sas_base_get_smid(ioc, ioc->ctl_cb_idx); + if (!smid) { + printk(MPT2SAS_ERR_FMT "%s: failed obtaining a smid\n", + ioc->name, __func__); + rc = -EAGAIN; + goto out; + } + + rc = 0; + ioc->ctl_cmds.status = MPT2_CMD_PENDING; + memset(ioc->ctl_cmds.reply, 0, ioc->reply_sz); + mpi_request = mpt2sas_base_get_msg_frame(ioc, smid); + ioc->ctl_cmds.smid = smid; + + request_data = ioc->diag_buffer[buffer_type]; + request_data_sz = karg.requested_buffer_size; + ioc->unique_id[buffer_type] = karg.unique_id; + ioc->diag_buffer_status[buffer_type] = 0; + memcpy(ioc->product_specific[buffer_type], karg.product_specific, + MPT2_PRODUCT_SPECIFIC_DWORDS); + ioc->diagnostic_flags[buffer_type] = karg.diagnostic_flags; + + if (request_data) { + request_data_dma = ioc->diag_buffer_dma[buffer_type]; + if (request_data_sz != ioc->diag_buffer_sz[buffer_type]) { + pci_free_consistent(ioc->pdev, + ioc->diag_buffer_sz[buffer_type], + request_data, request_data_dma); + request_data = NULL; + } + } + + if (request_data == NULL) { + ioc->diag_buffer_sz[buffer_type] = 0; + ioc->diag_buffer_dma[buffer_type] = 0; + request_data = pci_alloc_consistent( + ioc->pdev, request_data_sz, &request_data_dma); + if (request_data == NULL) { + printk(MPT2SAS_ERR_FMT "%s: failed allocating memory" + " for diag buffers, requested size(%d)\n", + ioc->name, __func__, request_data_sz); + mpt2sas_base_free_smid(ioc, smid); + return -ENOMEM; + } + ioc->diag_buffer[buffer_type] = request_data; + ioc->diag_buffer_sz[buffer_type] = request_data_sz; + ioc->diag_buffer_dma[buffer_type] = request_data_dma; + } + + mpi_request->Function = MPI2_FUNCTION_DIAG_BUFFER_POST; + mpi_request->BufferType = karg.buffer_type; + mpi_request->Flags = cpu_to_le32(karg.diagnostic_flags); + mpi_request->BufferAddress = cpu_to_le64(request_data_dma); + mpi_request->BufferLength = cpu_to_le32(request_data_sz); + + dctlprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s: diag_buffer(0x%p), " + "dma(0x%llx), sz(%d)\n", ioc->name, __func__, request_data, + (unsigned long long)request_data_dma, mpi_request->BufferLength)); + + for (i = 0; i < MPT2_PRODUCT_SPECIFIC_DWORDS; i++) + mpi_request->ProductSpecific[i] = + cpu_to_le32(ioc->product_specific[buffer_type][i]); + + mpt2sas_base_put_smid_default(ioc, smid, mpi_request->VF_ID); + timeleft = wait_for_completion_timeout(&ioc->ctl_cmds.done, + MPT2_IOCTL_DEFAULT_TIMEOUT*HZ); + + if (!(ioc->ctl_cmds.status & MPT2_CMD_COMPLETE)) { + printk(MPT2SAS_ERR_FMT "%s: timeout\n", ioc->name, + __func__); + _debug_dump_mf(mpi_request, + sizeof(Mpi2DiagBufferPostRequest_t)/4); + if (!(ioc->ctl_cmds.status & MPT2_CMD_RESET)) + issue_reset = 1; + goto issue_host_reset; + } + + /* process the completed Reply Message Frame */ + if ((ioc->ctl_cmds.status & MPT2_CMD_REPLY_VALID) == 0) { + printk(MPT2SAS_ERR_FMT "%s: no reply message\n", + ioc->name, __func__); + rc = -EFAULT; + goto out; + } + + mpi_reply = ioc->ctl_cmds.reply; + ioc_status = le16_to_cpu(mpi_reply->IOCStatus) & MPI2_IOCSTATUS_MASK; + + if (ioc_status == MPI2_IOCSTATUS_SUCCESS) { + ioc->diag_buffer_status[buffer_type] |= + MPT2_DIAG_BUFFER_IS_REGISTERED; + dctlprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s: success\n", + ioc->name, __func__)); + } else { + printk(MPT2SAS_DEBUG_FMT "%s: ioc_status(0x%04x) " + "log_info(0x%08x)\n", ioc->name, __func__, + ioc_status, mpi_reply->IOCLogInfo); + rc = -EFAULT; + } + + issue_host_reset: + if (issue_reset) + mpt2sas_base_hard_reset_handler(ioc, CAN_SLEEP, + FORCE_BIG_HAMMER); + + out: + + if (rc && request_data) + pci_free_consistent(ioc->pdev, request_data_sz, + request_data, request_data_dma); + + ioc->ctl_cmds.status = MPT2_CMD_NOT_USED; + mutex_unlock(&ioc->ctl_cmds.mutex); + return rc; +} + +/** + * _ctl_diag_unregister - application unregister with driver + * @arg - user space buffer containing ioctl content + * + * This will allow the driver to cleanup any memory allocated for diag + * messages and to free up any resources. + */ +static long +_ctl_diag_unregister(void __user *arg) +{ + struct mpt2_diag_unregister karg; + struct MPT2SAS_ADAPTER *ioc; + void *request_data; + dma_addr_t request_data_dma; + u32 request_data_sz; + u8 buffer_type; + + if (copy_from_user(&karg, arg, sizeof(karg))) { + printk(KERN_ERR "failure at %s:%d/%s()!\n", + __FILE__, __LINE__, __func__); + return -EFAULT; + } + if (_ctl_verify_adapter(karg.hdr.ioc_number, &ioc) == -1 || !ioc) + return -ENODEV; + + dctlprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s\n", ioc->name, + __func__)); + + buffer_type = karg.unique_id & 0x000000ff; + if (!_ctl_diag_capability(ioc, buffer_type)) { + printk(MPT2SAS_ERR_FMT "%s: doesn't have capability for " + "buffer_type(0x%02x)\n", ioc->name, __func__, buffer_type); + return -EPERM; + } + + if ((ioc->diag_buffer_status[buffer_type] & + MPT2_DIAG_BUFFER_IS_REGISTERED) == 0) { + printk(MPT2SAS_ERR_FMT "%s: buffer_type(0x%02x) is not " + "registered\n", ioc->name, __func__, buffer_type); + return -EINVAL; + } + if ((ioc->diag_buffer_status[buffer_type] & + MPT2_DIAG_BUFFER_IS_RELEASED) == 0) { + printk(MPT2SAS_ERR_FMT "%s: buffer_type(0x%02x) has not been " + "released\n", ioc->name, __func__, buffer_type); + return -EINVAL; + } + + if (karg.unique_id != ioc->unique_id[buffer_type]) { + printk(MPT2SAS_ERR_FMT "%s: unique_id(0x%08x) is not " + "registered\n", ioc->name, __func__, karg.unique_id); + return -EINVAL; + } + + request_data = ioc->diag_buffer[buffer_type]; + if (!request_data) { + printk(MPT2SAS_ERR_FMT "%s: doesn't have memory allocated for " + "buffer_type(0x%02x)\n", ioc->name, __func__, buffer_type); + return -ENOMEM; + } + + request_data_sz = ioc->diag_buffer_sz[buffer_type]; + request_data_dma = ioc->diag_buffer_dma[buffer_type]; + pci_free_consistent(ioc->pdev, request_data_sz, + request_data, request_data_dma); + ioc->diag_buffer[buffer_type] = NULL; + ioc->diag_buffer_status[buffer_type] = 0; + return 0; +} + +/** + * _ctl_diag_query - query relevant info associated with diag buffers + * @arg - user space buffer containing ioctl content + * + * The application will send only buffer_type and unique_id. Driver will + * inspect unique_id first, if valid, fill in all the info. If unique_id is + * 0x00, the driver will return info specified by Buffer Type. + */ +static long +_ctl_diag_query(void __user *arg) +{ + struct mpt2_diag_query karg; + struct MPT2SAS_ADAPTER *ioc; + void *request_data; + int i; + u8 buffer_type; + + if (copy_from_user(&karg, arg, sizeof(karg))) { + printk(KERN_ERR "failure at %s:%d/%s()!\n", + __FILE__, __LINE__, __func__); + return -EFAULT; + } + if (_ctl_verify_adapter(karg.hdr.ioc_number, &ioc) == -1 || !ioc) + return -ENODEV; + + dctlprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s\n", ioc->name, + __func__)); + + karg.application_flags = 0; + buffer_type = karg.buffer_type; + + if (!_ctl_diag_capability(ioc, buffer_type)) { + printk(MPT2SAS_ERR_FMT "%s: doesn't have capability for " + "buffer_type(0x%02x)\n", ioc->name, __func__, buffer_type); + return -EPERM; + } + + if ((ioc->diag_buffer_status[buffer_type] & + MPT2_DIAG_BUFFER_IS_REGISTERED) == 0) { + printk(MPT2SAS_ERR_FMT "%s: buffer_type(0x%02x) is not " + "registered\n", ioc->name, __func__, buffer_type); + return -EINVAL; + } + + if (karg.unique_id & 0xffffff00) { + if (karg.unique_id != ioc->unique_id[buffer_type]) { + printk(MPT2SAS_ERR_FMT "%s: unique_id(0x%08x) is not " + "registered\n", ioc->name, __func__, + karg.unique_id); + return -EINVAL; + } + } + + request_data = ioc->diag_buffer[buffer_type]; + if (!request_data) { + printk(MPT2SAS_ERR_FMT "%s: doesn't have buffer for " + "buffer_type(0x%02x)\n", ioc->name, __func__, buffer_type); + return -ENOMEM; + } + + if (ioc->diag_buffer_status[buffer_type] & MPT2_DIAG_BUFFER_IS_RELEASED) + karg.application_flags = (MPT2_APP_FLAGS_APP_OWNED | + MPT2_APP_FLAGS_BUFFER_VALID); + else + karg.application_flags = (MPT2_APP_FLAGS_APP_OWNED | + MPT2_APP_FLAGS_BUFFER_VALID | + MPT2_APP_FLAGS_FW_BUFFER_ACCESS); + + for (i = 0; i < MPT2_PRODUCT_SPECIFIC_DWORDS; i++) + karg.product_specific[i] = + ioc->product_specific[buffer_type][i]; + + karg.total_buffer_size = ioc->diag_buffer_sz[buffer_type]; + karg.driver_added_buffer_size = 0; + karg.unique_id = ioc->unique_id[buffer_type]; + karg.diagnostic_flags = ioc->diagnostic_flags[buffer_type]; + + if (copy_to_user(arg, &karg, sizeof(struct mpt2_diag_query))) { + printk(MPT2SAS_ERR_FMT "%s: unable to write mpt2_diag_query " + "data @ %p\n", ioc->name, __func__, arg); + return -EFAULT; + } + return 0; +} + +/** + * _ctl_diag_release - request to send Diag Release Message to firmware + * @arg - user space buffer containing ioctl content + * @state - NON_BLOCKING or BLOCKING + * + * This allows ownership of the specified buffer to returned to the driver, + * allowing an application to read the buffer without fear that firmware is + * overwritting information in the buffer. + */ +static long +_ctl_diag_release(void __user *arg, enum block_state state) +{ + struct mpt2_diag_release karg; + struct MPT2SAS_ADAPTER *ioc; + void *request_data; + int rc; + Mpi2DiagReleaseRequest_t *mpi_request; + Mpi2DiagReleaseReply_t *mpi_reply; + u8 buffer_type; + unsigned long timeleft; + u16 smid; + u16 ioc_status; + u8 issue_reset = 0; + + if (copy_from_user(&karg, arg, sizeof(karg))) { + printk(KERN_ERR "failure at %s:%d/%s()!\n", + __FILE__, __LINE__, __func__); + return -EFAULT; + } + if (_ctl_verify_adapter(karg.hdr.ioc_number, &ioc) == -1 || !ioc) + return -ENODEV; + + dctlprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s\n", ioc->name, + __func__)); + + buffer_type = karg.unique_id & 0x000000ff; + if (!_ctl_diag_capability(ioc, buffer_type)) { + printk(MPT2SAS_ERR_FMT "%s: doesn't have capability for " + "buffer_type(0x%02x)\n", ioc->name, __func__, buffer_type); + return -EPERM; + } + + if ((ioc->diag_buffer_status[buffer_type] & + MPT2_DIAG_BUFFER_IS_REGISTERED) == 0) { + printk(MPT2SAS_ERR_FMT "%s: buffer_type(0x%02x) is not " + "registered\n", ioc->name, __func__, buffer_type); + return -EINVAL; + } + + if (karg.unique_id != ioc->unique_id[buffer_type]) { + printk(MPT2SAS_ERR_FMT "%s: unique_id(0x%08x) is not " + "registered\n", ioc->name, __func__, karg.unique_id); + return -EINVAL; + } + + if (ioc->diag_buffer_status[buffer_type] & + MPT2_DIAG_BUFFER_IS_RELEASED) { + printk(MPT2SAS_ERR_FMT "%s: buffer_type(0x%02x) " + "is already released\n", ioc->name, __func__, + buffer_type); + return 0; + } + + request_data = ioc->diag_buffer[buffer_type]; + + if (!request_data) { + printk(MPT2SAS_ERR_FMT "%s: doesn't have memory allocated for " + "buffer_type(0x%02x)\n", ioc->name, __func__, buffer_type); + return -ENOMEM; + } + + if (state == NON_BLOCKING && !mutex_trylock(&ioc->ctl_cmds.mutex)) + return -EAGAIN; + else if (mutex_lock_interruptible(&ioc->ctl_cmds.mutex)) + return -ERESTARTSYS; + + if (ioc->ctl_cmds.status != MPT2_CMD_NOT_USED) { + printk(MPT2SAS_ERR_FMT "%s: ctl_cmd in use\n", + ioc->name, __func__); + rc = -EAGAIN; + goto out; + } + + smid = mpt2sas_base_get_smid(ioc, ioc->ctl_cb_idx); + if (!smid) { + printk(MPT2SAS_ERR_FMT "%s: failed obtaining a smid\n", + ioc->name, __func__); + rc = -EAGAIN; + goto out; + } + + rc = 0; + ioc->ctl_cmds.status = MPT2_CMD_PENDING; + memset(ioc->ctl_cmds.reply, 0, ioc->reply_sz); + mpi_request = mpt2sas_base_get_msg_frame(ioc, smid); + ioc->ctl_cmds.smid = smid; + + mpi_request->Function = MPI2_FUNCTION_DIAG_RELEASE; + mpi_request->BufferType = buffer_type; + + mpt2sas_base_put_smid_default(ioc, smid, mpi_request->VF_ID); + timeleft = wait_for_completion_timeout(&ioc->ctl_cmds.done, + MPT2_IOCTL_DEFAULT_TIMEOUT*HZ); + + if (!(ioc->ctl_cmds.status & MPT2_CMD_COMPLETE)) { + printk(MPT2SAS_ERR_FMT "%s: timeout\n", ioc->name, + __func__); + _debug_dump_mf(mpi_request, + sizeof(Mpi2DiagReleaseRequest_t)/4); + if (!(ioc->ctl_cmds.status & MPT2_CMD_RESET)) + issue_reset = 1; + goto issue_host_reset; + } + + /* process the completed Reply Message Frame */ + if ((ioc->ctl_cmds.status & MPT2_CMD_REPLY_VALID) == 0) { + printk(MPT2SAS_ERR_FMT "%s: no reply message\n", + ioc->name, __func__); + rc = -EFAULT; + goto out; + } + + mpi_reply = ioc->ctl_cmds.reply; + ioc_status = le16_to_cpu(mpi_reply->IOCStatus) & MPI2_IOCSTATUS_MASK; + + if (ioc_status == MPI2_IOCSTATUS_SUCCESS) { + ioc->diag_buffer_status[buffer_type] |= + MPT2_DIAG_BUFFER_IS_RELEASED; + dctlprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s: success\n", + ioc->name, __func__)); + } else { + printk(MPT2SAS_DEBUG_FMT "%s: ioc_status(0x%04x) " + "log_info(0x%08x)\n", ioc->name, __func__, + ioc_status, mpi_reply->IOCLogInfo); + rc = -EFAULT; + } + + issue_host_reset: + if (issue_reset) + mpt2sas_base_hard_reset_handler(ioc, CAN_SLEEP, + FORCE_BIG_HAMMER); + + out: + + ioc->ctl_cmds.status = MPT2_CMD_NOT_USED; + mutex_unlock(&ioc->ctl_cmds.mutex); + return rc; +} + +/** + * _ctl_diag_read_buffer - request for copy of the diag buffer + * @arg - user space buffer containing ioctl content + * @state - NON_BLOCKING or BLOCKING + */ +static long +_ctl_diag_read_buffer(void __user *arg, enum block_state state) +{ + struct mpt2_diag_read_buffer karg; + struct mpt2_diag_read_buffer __user *uarg = arg; + struct MPT2SAS_ADAPTER *ioc; + void *request_data, *diag_data; + Mpi2DiagBufferPostRequest_t *mpi_request; + Mpi2DiagBufferPostReply_t *mpi_reply; + int rc, i; + u8 buffer_type; + unsigned long timeleft; + u16 smid; + u16 ioc_status; + u8 issue_reset = 0; + + if (copy_from_user(&karg, arg, sizeof(karg))) { + printk(KERN_ERR "failure at %s:%d/%s()!\n", + __FILE__, __LINE__, __func__); + return -EFAULT; + } + if (_ctl_verify_adapter(karg.hdr.ioc_number, &ioc) == -1 || !ioc) + return -ENODEV; + + dctlprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s\n", ioc->name, + __func__)); + + buffer_type = karg.unique_id & 0x000000ff; + if (!_ctl_diag_capability(ioc, buffer_type)) { + printk(MPT2SAS_ERR_FMT "%s: doesn't have capability for " + "buffer_type(0x%02x)\n", ioc->name, __func__, buffer_type); + return -EPERM; + } + + if (karg.unique_id != ioc->unique_id[buffer_type]) { + printk(MPT2SAS_ERR_FMT "%s: unique_id(0x%08x) is not " + "registered\n", ioc->name, __func__, karg.unique_id); + return -EINVAL; + } + + request_data = ioc->diag_buffer[buffer_type]; + if (!request_data) { + printk(MPT2SAS_ERR_FMT "%s: doesn't have buffer for " + "buffer_type(0x%02x)\n", ioc->name, __func__, buffer_type); + return -ENOMEM; + } + + if ((karg.starting_offset % 4) || (karg.bytes_to_read % 4)) { + printk(MPT2SAS_ERR_FMT "%s: either the starting_offset " + "or bytes_to_read are not 4 byte aligned\n", ioc->name, + __func__); + return -EINVAL; + } + + diag_data = (void *)(request_data + karg.starting_offset); + dctlprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s: diag_buffer(%p), " + "offset(%d), sz(%d)\n", ioc->name, __func__, + diag_data, karg.starting_offset, karg.bytes_to_read)); + + if (copy_to_user((void __user *)uarg->diagnostic_data, + diag_data, karg.bytes_to_read)) { + printk(MPT2SAS_ERR_FMT "%s: Unable to write " + "mpt_diag_read_buffer_t data @ %p\n", ioc->name, + __func__, diag_data); + return -EFAULT; + } + + if ((karg.flags & MPT2_FLAGS_REREGISTER) == 0) + return 0; + + dctlprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s: Reregister " + "buffer_type(0x%02x)\n", ioc->name, __func__, buffer_type)); + if ((ioc->diag_buffer_status[buffer_type] & + MPT2_DIAG_BUFFER_IS_RELEASED) == 0) { + dctlprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s: " + "buffer_type(0x%02x) is still registered\n", ioc->name, + __func__, buffer_type)); + return 0; + } + /* Get a free request frame and save the message context. + */ + if (state == NON_BLOCKING && !mutex_trylock(&ioc->ctl_cmds.mutex)) + return -EAGAIN; + else if (mutex_lock_interruptible(&ioc->ctl_cmds.mutex)) + return -ERESTARTSYS; + + if (ioc->ctl_cmds.status != MPT2_CMD_NOT_USED) { + printk(MPT2SAS_ERR_FMT "%s: ctl_cmd in use\n", + ioc->name, __func__); + rc = -EAGAIN; + goto out; + } + + smid = mpt2sas_base_get_smid(ioc, ioc->ctl_cb_idx); + if (!smid) { + printk(MPT2SAS_ERR_FMT "%s: failed obtaining a smid\n", + ioc->name, __func__); + rc = -EAGAIN; + goto out; + } + + rc = 0; + ioc->ctl_cmds.status = MPT2_CMD_PENDING; + memset(ioc->ctl_cmds.reply, 0, ioc->reply_sz); + mpi_request = mpt2sas_base_get_msg_frame(ioc, smid); + ioc->ctl_cmds.smid = smid; + + mpi_request->Function = MPI2_FUNCTION_DIAG_BUFFER_POST; + mpi_request->BufferType = buffer_type; + mpi_request->BufferLength = + cpu_to_le32(ioc->diag_buffer_sz[buffer_type]); + mpi_request->BufferAddress = + cpu_to_le64(ioc->diag_buffer_dma[buffer_type]); + for (i = 0; i < MPT2_PRODUCT_SPECIFIC_DWORDS; i++) + mpi_request->ProductSpecific[i] = + cpu_to_le32(ioc->product_specific[buffer_type][i]); + + mpt2sas_base_put_smid_default(ioc, smid, mpi_request->VF_ID); + timeleft = wait_for_completion_timeout(&ioc->ctl_cmds.done, + MPT2_IOCTL_DEFAULT_TIMEOUT*HZ); + + if (!(ioc->ctl_cmds.status & MPT2_CMD_COMPLETE)) { + printk(MPT2SAS_ERR_FMT "%s: timeout\n", ioc->name, + __func__); + _debug_dump_mf(mpi_request, + sizeof(Mpi2DiagBufferPostRequest_t)/4); + if (!(ioc->ctl_cmds.status & MPT2_CMD_RESET)) + issue_reset = 1; + goto issue_host_reset; + } + + /* process the completed Reply Message Frame */ + if ((ioc->ctl_cmds.status & MPT2_CMD_REPLY_VALID) == 0) { + printk(MPT2SAS_ERR_FMT "%s: no reply message\n", + ioc->name, __func__); + rc = -EFAULT; + goto out; + } + + mpi_reply = ioc->ctl_cmds.reply; + ioc_status = le16_to_cpu(mpi_reply->IOCStatus) & MPI2_IOCSTATUS_MASK; + + if (ioc_status == MPI2_IOCSTATUS_SUCCESS) { + ioc->diag_buffer_status[buffer_type] |= + MPT2_DIAG_BUFFER_IS_REGISTERED; + dctlprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s: success\n", + ioc->name, __func__)); + } else { + printk(MPT2SAS_DEBUG_FMT "%s: ioc_status(0x%04x) " + "log_info(0x%08x)\n", ioc->name, __func__, + ioc_status, mpi_reply->IOCLogInfo); + rc = -EFAULT; + } + + issue_host_reset: + if (issue_reset) + mpt2sas_base_hard_reset_handler(ioc, CAN_SLEEP, + FORCE_BIG_HAMMER); + + out: + + ioc->ctl_cmds.status = MPT2_CMD_NOT_USED; + mutex_unlock(&ioc->ctl_cmds.mutex); + return rc; +} + +/** + * _ctl_ioctl_main - main ioctl entry point + * @file - (struct file) + * @cmd - ioctl opcode + * @arg - + */ +static long +_ctl_ioctl_main(struct file *file, unsigned int cmd, void __user *arg) +{ + enum block_state state; + long ret = -EINVAL; + unsigned long flags; + + state = (file->f_flags & O_NONBLOCK) ? NON_BLOCKING : + BLOCKING; + + switch (cmd) { + case MPT2IOCINFO: + if (_IOC_SIZE(cmd) == sizeof(struct mpt2_ioctl_iocinfo)) + ret = _ctl_getiocinfo(arg); + break; + case MPT2COMMAND: + { + struct mpt2_ioctl_command karg; + struct mpt2_ioctl_command __user *uarg; + struct MPT2SAS_ADAPTER *ioc; + + if (copy_from_user(&karg, arg, sizeof(karg))) { + printk(KERN_ERR "failure at %s:%d/%s()!\n", + __FILE__, __LINE__, __func__); + return -EFAULT; + } + + if (_ctl_verify_adapter(karg.hdr.ioc_number, &ioc) == -1 || + !ioc) + return -ENODEV; + + spin_lock_irqsave(&ioc->ioc_reset_in_progress_lock, flags); + if (ioc->shost_recovery) { + spin_unlock_irqrestore(&ioc->ioc_reset_in_progress_lock, + flags); + return -EAGAIN; + } + spin_unlock_irqrestore(&ioc->ioc_reset_in_progress_lock, flags); + + if (_IOC_SIZE(cmd) == sizeof(struct mpt2_ioctl_command)) { + uarg = arg; + ret = _ctl_do_mpt_command(ioc, karg, &uarg->mf, state); + } + break; + } + case MPT2EVENTQUERY: + if (_IOC_SIZE(cmd) == sizeof(struct mpt2_ioctl_eventquery)) + ret = _ctl_eventquery(arg); + break; + case MPT2EVENTENABLE: + if (_IOC_SIZE(cmd) == sizeof(struct mpt2_ioctl_eventenable)) + ret = _ctl_eventenable(arg); + break; + case MPT2EVENTREPORT: + ret = _ctl_eventreport(arg); + break; + case MPT2HARDRESET: + if (_IOC_SIZE(cmd) == sizeof(struct mpt2_ioctl_diag_reset)) + ret = _ctl_do_reset(arg); + break; + case MPT2BTDHMAPPING: + if (_IOC_SIZE(cmd) == sizeof(struct mpt2_ioctl_btdh_mapping)) + ret = _ctl_btdh_mapping(arg); + break; + case MPT2DIAGREGISTER: + if (_IOC_SIZE(cmd) == sizeof(struct mpt2_diag_register)) + ret = _ctl_diag_register(arg, state); + break; + case MPT2DIAGUNREGISTER: + if (_IOC_SIZE(cmd) == sizeof(struct mpt2_diag_unregister)) + ret = _ctl_diag_unregister(arg); + break; + case MPT2DIAGQUERY: + if (_IOC_SIZE(cmd) == sizeof(struct mpt2_diag_query)) + ret = _ctl_diag_query(arg); + break; + case MPT2DIAGRELEASE: + if (_IOC_SIZE(cmd) == sizeof(struct mpt2_diag_release)) + ret = _ctl_diag_release(arg, state); + break; + case MPT2DIAGREADBUFFER: + if (_IOC_SIZE(cmd) == sizeof(struct mpt2_diag_read_buffer)) + ret = _ctl_diag_read_buffer(arg, state); + break; + default: + { + struct mpt2_ioctl_command karg; + struct MPT2SAS_ADAPTER *ioc; + + if (copy_from_user(&karg, arg, sizeof(karg))) { + printk(KERN_ERR "failure at %s:%d/%s()!\n", + __FILE__, __LINE__, __func__); + return -EFAULT; + } + + if (_ctl_verify_adapter(karg.hdr.ioc_number, &ioc) == -1 || + !ioc) + return -ENODEV; + + dctlprintk(ioc, printk(MPT2SAS_DEBUG_FMT + "unsupported ioctl opcode(0x%08x)\n", ioc->name, cmd)); + break; + } + } + return ret; +} + +/** + * _ctl_ioctl - main ioctl entry point (unlocked) + * @file - (struct file) + * @cmd - ioctl opcode + * @arg - + */ +static long +_ctl_ioctl(struct file *file, unsigned int cmd, unsigned long arg) +{ + long ret; + lock_kernel(); + ret = _ctl_ioctl_main(file, cmd, (void __user *)arg); + unlock_kernel(); + return ret; +} + +#ifdef CONFIG_COMPAT +/** + * _ctl_compat_mpt_command - convert 32bit pointers to 64bit. + * @file - (struct file) + * @cmd - ioctl opcode + * @arg - (struct mpt2_ioctl_command32) + * + * MPT2COMMAND32 - Handle 32bit applications running on 64bit os. + */ +static long +_ctl_compat_mpt_command(struct file *file, unsigned cmd, unsigned long arg) +{ + struct mpt2_ioctl_command32 karg32; + struct mpt2_ioctl_command32 __user *uarg; + struct mpt2_ioctl_command karg; + struct MPT2SAS_ADAPTER *ioc; + enum block_state state; + unsigned long flags; + + if (_IOC_SIZE(cmd) != sizeof(struct mpt2_ioctl_command32)) + return -EINVAL; + + uarg = (struct mpt2_ioctl_command32 __user *) arg; + + if (copy_from_user(&karg32, (char __user *)arg, sizeof(karg32))) { + printk(KERN_ERR "failure at %s:%d/%s()!\n", + __FILE__, __LINE__, __func__); + return -EFAULT; + } + if (_ctl_verify_adapter(karg32.hdr.ioc_number, &ioc) == -1 || !ioc) + return -ENODEV; + + spin_lock_irqsave(&ioc->ioc_reset_in_progress_lock, flags); + if (ioc->shost_recovery) { + spin_unlock_irqrestore(&ioc->ioc_reset_in_progress_lock, + flags); + return -EAGAIN; + } + spin_unlock_irqrestore(&ioc->ioc_reset_in_progress_lock, flags); + + memset(&karg, 0, sizeof(struct mpt2_ioctl_command)); + karg.hdr.ioc_number = karg32.hdr.ioc_number; + karg.hdr.port_number = karg32.hdr.port_number; + karg.hdr.max_data_size = karg32.hdr.max_data_size; + karg.timeout = karg32.timeout; + karg.max_reply_bytes = karg32.max_reply_bytes; + karg.data_in_size = karg32.data_in_size; + karg.data_out_size = karg32.data_out_size; + karg.max_sense_bytes = karg32.max_sense_bytes; + karg.data_sge_offset = karg32.data_sge_offset; + memcpy(&karg.reply_frame_buf_ptr, &karg32.reply_frame_buf_ptr, + sizeof(uint32_t)); + memcpy(&karg.data_in_buf_ptr, &karg32.data_in_buf_ptr, + sizeof(uint32_t)); + memcpy(&karg.data_out_buf_ptr, &karg32.data_out_buf_ptr, + sizeof(uint32_t)); + memcpy(&karg.sense_data_ptr, &karg32.sense_data_ptr, + sizeof(uint32_t)); + state = (file->f_flags & O_NONBLOCK) ? NON_BLOCKING : BLOCKING; + return _ctl_do_mpt_command(ioc, karg, &uarg->mf, state); +} + +/** + * _ctl_ioctl_compat - main ioctl entry point (compat) + * @file - + * @cmd - + * @arg - + * + * This routine handles 32 bit applications in 64bit os. + */ +static long +_ctl_ioctl_compat(struct file *file, unsigned cmd, unsigned long arg) +{ + long ret; + lock_kernel(); + if (cmd == MPT2COMMAND32) + ret = _ctl_compat_mpt_command(file, cmd, arg); + else + ret = _ctl_ioctl_main(file, cmd, (void __user *)arg); + unlock_kernel(); + return ret; +} +#endif + +/* scsi host attributes */ + +/** + * _ctl_version_fw_show - firmware version + * @cdev - pointer to embedded class device + * @buf - the buffer returned + * + * A sysfs 'read-only' shost attribute. + */ +static ssize_t +_ctl_version_fw_show(struct device *cdev, struct device_attribute *attr, + char *buf) +{ + struct Scsi_Host *shost = class_to_shost(cdev); + struct MPT2SAS_ADAPTER *ioc = shost_priv(shost); + + return snprintf(buf, PAGE_SIZE, "%02d.%02d.%02d.%02d\n", + (ioc->facts.FWVersion.Word & 0xFF000000) >> 24, + (ioc->facts.FWVersion.Word & 0x00FF0000) >> 16, + (ioc->facts.FWVersion.Word & 0x0000FF00) >> 8, + ioc->facts.FWVersion.Word & 0x000000FF); +} +static DEVICE_ATTR(version_fw, S_IRUGO, _ctl_version_fw_show, NULL); + +/** + * _ctl_version_bios_show - bios version + * @cdev - pointer to embedded class device + * @buf - the buffer returned + * + * A sysfs 'read-only' shost attribute. + */ +static ssize_t +_ctl_version_bios_show(struct device *cdev, struct device_attribute *attr, + char *buf) +{ + struct Scsi_Host *shost = class_to_shost(cdev); + struct MPT2SAS_ADAPTER *ioc = shost_priv(shost); + + u32 version = le32_to_cpu(ioc->bios_pg3.BiosVersion); + + return snprintf(buf, PAGE_SIZE, "%02d.%02d.%02d.%02d\n", + (version & 0xFF000000) >> 24, + (version & 0x00FF0000) >> 16, + (version & 0x0000FF00) >> 8, + version & 0x000000FF); +} +static DEVICE_ATTR(version_bios, S_IRUGO, _ctl_version_bios_show, NULL); + +/** + * _ctl_version_mpi_show - MPI (message passing interface) version + * @cdev - pointer to embedded class device + * @buf - the buffer returned + * + * A sysfs 'read-only' shost attribute. + */ +static ssize_t +_ctl_version_mpi_show(struct device *cdev, struct device_attribute *attr, + char *buf) +{ + struct Scsi_Host *shost = class_to_shost(cdev); + struct MPT2SAS_ADAPTER *ioc = shost_priv(shost); + + return snprintf(buf, PAGE_SIZE, "%03x.%02x\n", + ioc->facts.MsgVersion, ioc->facts.HeaderVersion >> 8); +} +static DEVICE_ATTR(version_mpi, S_IRUGO, _ctl_version_mpi_show, NULL); + +/** + * _ctl_version_product_show - product name + * @cdev - pointer to embedded class device + * @buf - the buffer returned + * + * A sysfs 'read-only' shost attribute. + */ +static ssize_t +_ctl_version_product_show(struct device *cdev, struct device_attribute *attr, + char *buf) +{ + struct Scsi_Host *shost = class_to_shost(cdev); + struct MPT2SAS_ADAPTER *ioc = shost_priv(shost); + + return snprintf(buf, 16, "%s\n", ioc->manu_pg0.ChipName); +} +static DEVICE_ATTR(version_product, S_IRUGO, + _ctl_version_product_show, NULL); + +/** + * _ctl_version_nvdata_persistent_show - ndvata persistent version + * @cdev - pointer to embedded class device + * @buf - the buffer returned + * + * A sysfs 'read-only' shost attribute. + */ +static ssize_t +_ctl_version_nvdata_persistent_show(struct device *cdev, + struct device_attribute *attr, char *buf) +{ + struct Scsi_Host *shost = class_to_shost(cdev); + struct MPT2SAS_ADAPTER *ioc = shost_priv(shost); + + return snprintf(buf, PAGE_SIZE, "%02xh\n", + le16_to_cpu(ioc->iounit_pg0.NvdataVersionPersistent.Word)); +} +static DEVICE_ATTR(version_nvdata_persistent, S_IRUGO, + _ctl_version_nvdata_persistent_show, NULL); + +/** + * _ctl_version_nvdata_default_show - nvdata default version + * @cdev - pointer to embedded class device + * @buf - the buffer returned + * + * A sysfs 'read-only' shost attribute. + */ +static ssize_t +_ctl_version_nvdata_default_show(struct device *cdev, + struct device_attribute *attr, char *buf) +{ + struct Scsi_Host *shost = class_to_shost(cdev); + struct MPT2SAS_ADAPTER *ioc = shost_priv(shost); + + return snprintf(buf, PAGE_SIZE, "%02xh\n", + le16_to_cpu(ioc->iounit_pg0.NvdataVersionDefault.Word)); +} +static DEVICE_ATTR(version_nvdata_default, S_IRUGO, + _ctl_version_nvdata_default_show, NULL); + +/** + * _ctl_board_name_show - board name + * @cdev - pointer to embedded class device + * @buf - the buffer returned + * + * A sysfs 'read-only' shost attribute. + */ +static ssize_t +_ctl_board_name_show(struct device *cdev, struct device_attribute *attr, + char *buf) +{ + struct Scsi_Host *shost = class_to_shost(cdev); + struct MPT2SAS_ADAPTER *ioc = shost_priv(shost); + + return snprintf(buf, 16, "%s\n", ioc->manu_pg0.BoardName); +} +static DEVICE_ATTR(board_name, S_IRUGO, _ctl_board_name_show, NULL); + +/** + * _ctl_board_assembly_show - board assembly name + * @cdev - pointer to embedded class device + * @buf - the buffer returned + * + * A sysfs 'read-only' shost attribute. + */ +static ssize_t +_ctl_board_assembly_show(struct device *cdev, struct device_attribute *attr, + char *buf) +{ + struct Scsi_Host *shost = class_to_shost(cdev); + struct MPT2SAS_ADAPTER *ioc = shost_priv(shost); + + return snprintf(buf, 16, "%s\n", ioc->manu_pg0.BoardAssembly); +} +static DEVICE_ATTR(board_assembly, S_IRUGO, + _ctl_board_assembly_show, NULL); + +/** + * _ctl_board_tracer_show - board tracer number + * @cdev - pointer to embedded class device + * @buf - the buffer returned + * + * A sysfs 'read-only' shost attribute. + */ +static ssize_t +_ctl_board_tracer_show(struct device *cdev, struct device_attribute *attr, + char *buf) +{ + struct Scsi_Host *shost = class_to_shost(cdev); + struct MPT2SAS_ADAPTER *ioc = shost_priv(shost); + + return snprintf(buf, 16, "%s\n", ioc->manu_pg0.BoardTracerNumber); +} +static DEVICE_ATTR(board_tracer, S_IRUGO, + _ctl_board_tracer_show, NULL); + +/** + * _ctl_io_delay_show - io missing delay + * @cdev - pointer to embedded class device + * @buf - the buffer returned + * + * This is for firmware implemention for deboucing device + * removal events. + * + * A sysfs 'read-only' shost attribute. + */ +static ssize_t +_ctl_io_delay_show(struct device *cdev, struct device_attribute *attr, + char *buf) +{ + struct Scsi_Host *shost = class_to_shost(cdev); + struct MPT2SAS_ADAPTER *ioc = shost_priv(shost); + + return snprintf(buf, PAGE_SIZE, "%02d\n", ioc->io_missing_delay); +} +static DEVICE_ATTR(io_delay, S_IRUGO, + _ctl_io_delay_show, NULL); + +/** + * _ctl_device_delay_show - device missing delay + * @cdev - pointer to embedded class device + * @buf - the buffer returned + * + * This is for firmware implemention for deboucing device + * removal events. + * + * A sysfs 'read-only' shost attribute. + */ +static ssize_t +_ctl_device_delay_show(struct device *cdev, struct device_attribute *attr, + char *buf) +{ + struct Scsi_Host *shost = class_to_shost(cdev); + struct MPT2SAS_ADAPTER *ioc = shost_priv(shost); + + return snprintf(buf, PAGE_SIZE, "%02d\n", ioc->device_missing_delay); +} +static DEVICE_ATTR(device_delay, S_IRUGO, + _ctl_device_delay_show, NULL); + +/** + * _ctl_fw_queue_depth_show - global credits + * @cdev - pointer to embedded class device + * @buf - the buffer returned + * + * This is firmware queue depth limit + * + * A sysfs 'read-only' shost attribute. + */ +static ssize_t +_ctl_fw_queue_depth_show(struct device *cdev, struct device_attribute *attr, + char *buf) +{ + struct Scsi_Host *shost = class_to_shost(cdev); + struct MPT2SAS_ADAPTER *ioc = shost_priv(shost); + + return snprintf(buf, PAGE_SIZE, "%02d\n", ioc->facts.RequestCredit); +} +static DEVICE_ATTR(fw_queue_depth, S_IRUGO, + _ctl_fw_queue_depth_show, NULL); + +/** + * _ctl_sas_address_show - sas address + * @cdev - pointer to embedded class device + * @buf - the buffer returned + * + * This is the controller sas address + * + * A sysfs 'read-only' shost attribute. + */ +static ssize_t +_ctl_host_sas_address_show(struct device *cdev, struct device_attribute *attr, + char *buf) +{ + struct Scsi_Host *shost = class_to_shost(cdev); + struct MPT2SAS_ADAPTER *ioc = shost_priv(shost); + + return snprintf(buf, PAGE_SIZE, "0x%016llx\n", + (unsigned long long)ioc->sas_hba.sas_address); +} +static DEVICE_ATTR(host_sas_address, S_IRUGO, + _ctl_host_sas_address_show, NULL); + +/** + * _ctl_logging_level_show - logging level + * @cdev - pointer to embedded class device + * @buf - the buffer returned + * + * A sysfs 'read/write' shost attribute. + */ +static ssize_t +_ctl_logging_level_show(struct device *cdev, struct device_attribute *attr, + char *buf) +{ + struct Scsi_Host *shost = class_to_shost(cdev); + struct MPT2SAS_ADAPTER *ioc = shost_priv(shost); + + return snprintf(buf, PAGE_SIZE, "%08xh\n", ioc->logging_level); +} +static ssize_t +_ctl_logging_level_store(struct device *cdev, struct device_attribute *attr, + const char *buf, size_t count) +{ + struct Scsi_Host *shost = class_to_shost(cdev); + struct MPT2SAS_ADAPTER *ioc = shost_priv(shost); + int val = 0; + + if (sscanf(buf, "%x", &val) != 1) + return -EINVAL; + + ioc->logging_level = val; + printk(MPT2SAS_INFO_FMT "logging_level=%08xh\n", ioc->name, + ioc->logging_level); + return strlen(buf); +} +static DEVICE_ATTR(logging_level, S_IRUGO | S_IWUSR, + _ctl_logging_level_show, _ctl_logging_level_store); + +struct device_attribute *mpt2sas_host_attrs[] = { + &dev_attr_version_fw, + &dev_attr_version_bios, + &dev_attr_version_mpi, + &dev_attr_version_product, + &dev_attr_version_nvdata_persistent, + &dev_attr_version_nvdata_default, + &dev_attr_board_name, + &dev_attr_board_assembly, + &dev_attr_board_tracer, + &dev_attr_io_delay, + &dev_attr_device_delay, + &dev_attr_logging_level, + &dev_attr_fw_queue_depth, + &dev_attr_host_sas_address, + NULL, +}; + +/* device attributes */ + +/** + * _ctl_device_sas_address_show - sas address + * @cdev - pointer to embedded class device + * @buf - the buffer returned + * + * This is the sas address for the target + * + * A sysfs 'read-only' shost attribute. + */ +static ssize_t +_ctl_device_sas_address_show(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct scsi_device *sdev = to_scsi_device(dev); + struct MPT2SAS_DEVICE *sas_device_priv_data = sdev->hostdata; + + return snprintf(buf, PAGE_SIZE, "0x%016llx\n", + (unsigned long long)sas_device_priv_data->sas_target->sas_address); +} +static DEVICE_ATTR(sas_address, S_IRUGO, _ctl_device_sas_address_show, NULL); + +/** + * _ctl_device_handle_show - device handle + * @cdev - pointer to embedded class device + * @buf - the buffer returned + * + * This is the firmware assigned device handle + * + * A sysfs 'read-only' shost attribute. + */ +static ssize_t +_ctl_device_handle_show(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct scsi_device *sdev = to_scsi_device(dev); + struct MPT2SAS_DEVICE *sas_device_priv_data = sdev->hostdata; + + return snprintf(buf, PAGE_SIZE, "0x%04x\n", + sas_device_priv_data->sas_target->handle); +} +static DEVICE_ATTR(sas_device_handle, S_IRUGO, _ctl_device_handle_show, NULL); + +struct device_attribute *mpt2sas_dev_attrs[] = { + &dev_attr_sas_address, + &dev_attr_sas_device_handle, + NULL, +}; + +static const struct file_operations ctl_fops = { + .owner = THIS_MODULE, + .unlocked_ioctl = _ctl_ioctl, + .release = _ctl_release, + .poll = _ctl_poll, + .fasync = _ctl_fasync, +#ifdef CONFIG_COMPAT + .compat_ioctl = _ctl_ioctl_compat, +#endif +}; + +static struct miscdevice ctl_dev = { + .minor = MPT2SAS_MINOR, + .name = MPT2SAS_DEV_NAME, + .fops = &ctl_fops, +}; + +/** + * mpt2sas_ctl_init - main entry point for ctl. + * + */ +void +mpt2sas_ctl_init(void) +{ + async_queue = NULL; + if (misc_register(&ctl_dev) < 0) + printk(KERN_ERR "%s can't register misc device [minor=%d]\n", + MPT2SAS_DRIVER_NAME, MPT2SAS_MINOR); + + init_waitqueue_head(&ctl_poll_wait); +} + +/** + * mpt2sas_ctl_exit - exit point for ctl + * + */ +void +mpt2sas_ctl_exit(void) +{ + struct MPT2SAS_ADAPTER *ioc; + int i; + + list_for_each_entry(ioc, &ioc_list, list) { + + /* free memory associated to diag buffers */ + for (i = 0; i < MPI2_DIAG_BUF_TYPE_COUNT; i++) { + if (!ioc->diag_buffer[i]) + continue; + pci_free_consistent(ioc->pdev, ioc->diag_buffer_sz[i], + ioc->diag_buffer[i], ioc->diag_buffer_dma[i]); + ioc->diag_buffer[i] = NULL; + ioc->diag_buffer_status[i] = 0; + } + + kfree(ioc->event_log); + } + misc_deregister(&ctl_dev); +} + diff --git a/drivers/scsi/mpt2sas/mpt2sas_ctl.h b/drivers/scsi/mpt2sas/mpt2sas_ctl.h new file mode 100644 index 0000000..dbb6c0c --- /dev/null +++ b/drivers/scsi/mpt2sas/mpt2sas_ctl.h @@ -0,0 +1,416 @@ +/* + * Management Module Support for MPT (Message Passing Technology) based + * controllers + * + * This code is based on drivers/scsi/mpt2sas/mpt2_ctl.h + * Copyright (C) 2007-2008 LSI Corporation + * (mailto:DL-MPTFusionLinux@lsi.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * NO WARRANTY + * THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR + * CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT + * LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT, + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is + * solely responsible for determining the appropriateness of using and + * distributing the Program and assumes all risks associated with its + * exercise of rights under this Agreement, including but not limited to + * the risks and costs of program errors, damage to or loss of data, + * programs or equipment, and unavailability or interruption of operations. + + * DISCLAIMER OF LIABILITY + * NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR + * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE + * USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED + * HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES + + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, + * USA. + */ + +#ifndef MPT2SAS_CTL_H_INCLUDED +#define MPT2SAS_CTL_H_INCLUDED + +#ifdef __KERNEL__ +#include +#endif + +#define MPT2SAS_DEV_NAME "mpt2ctl" +#define MPT2_MAGIC_NUMBER 'm' +#define MPT2_IOCTL_DEFAULT_TIMEOUT (10) /* in seconds */ + +/** + * IOCTL opcodes + */ +#define MPT2IOCINFO _IOWR(MPT2_MAGIC_NUMBER, 17, \ + struct mpt2_ioctl_iocinfo) +#define MPT2COMMAND _IOWR(MPT2_MAGIC_NUMBER, 20, \ + struct mpt2_ioctl_command) +#ifdef CONFIG_COMPAT +#define MPT2COMMAND32 _IOWR(MPT2_MAGIC_NUMBER, 20, \ + struct mpt2_ioctl_command32) +#endif +#define MPT2EVENTQUERY _IOWR(MPT2_MAGIC_NUMBER, 21, \ + struct mpt2_ioctl_eventquery) +#define MPT2EVENTENABLE _IOWR(MPT2_MAGIC_NUMBER, 22, \ + struct mpt2_ioctl_eventenable) +#define MPT2EVENTREPORT _IOWR(MPT2_MAGIC_NUMBER, 23, \ + struct mpt2_ioctl_eventreport) +#define MPT2HARDRESET _IOWR(MPT2_MAGIC_NUMBER, 24, \ + struct mpt2_ioctl_diag_reset) +#define MPT2BTDHMAPPING _IOWR(MPT2_MAGIC_NUMBER, 31, \ + struct mpt2_ioctl_btdh_mapping) + +/* diag buffer support */ +#define MPT2DIAGREGISTER _IOWR(MPT2_MAGIC_NUMBER, 26, \ + struct mpt2_diag_register) +#define MPT2DIAGRELEASE _IOWR(MPT2_MAGIC_NUMBER, 27, \ + struct mpt2_diag_release) +#define MPT2DIAGUNREGISTER _IOWR(MPT2_MAGIC_NUMBER, 28, \ + struct mpt2_diag_unregister) +#define MPT2DIAGQUERY _IOWR(MPT2_MAGIC_NUMBER, 29, \ + struct mpt2_diag_query) +#define MPT2DIAGREADBUFFER _IOWR(MPT2_MAGIC_NUMBER, 30, \ + struct mpt2_diag_read_buffer) + +/** + * struct mpt2_ioctl_header - main header structure + * @ioc_number - IOC unit number + * @port_number - IOC port number + * @max_data_size - maximum number bytes to transfer on read + */ +struct mpt2_ioctl_header { + uint32_t ioc_number; + uint32_t port_number; + uint32_t max_data_size; +}; + +/** + * struct mpt2_ioctl_diag_reset - diagnostic reset + * @hdr - generic header + */ +struct mpt2_ioctl_diag_reset { + struct mpt2_ioctl_header hdr; +}; + + +/** + * struct mpt2_ioctl_pci_info - pci device info + * @device - pci device id + * @function - pci function id + * @bus - pci bus id + * @segment_id - pci segment id + */ +struct mpt2_ioctl_pci_info { + union { + struct { + uint32_t device:5; + uint32_t function:3; + uint32_t bus:24; + } bits; + uint32_t word; + } u; + uint32_t segment_id; +}; + + +#define MPT2_IOCTL_INTERFACE_SCSI (0x00) +#define MPT2_IOCTL_INTERFACE_FC (0x01) +#define MPT2_IOCTL_INTERFACE_FC_IP (0x02) +#define MPT2_IOCTL_INTERFACE_SAS (0x03) +#define MPT2_IOCTL_INTERFACE_SAS2 (0x04) +#define MPT2_IOCTL_VERSION_LENGTH (32) + +/** + * struct mpt2_ioctl_iocinfo - generic controller info + * @hdr - generic header + * @adapter_type - type of adapter (spi, fc, sas) + * @port_number - port number + * @pci_id - PCI Id + * @hw_rev - hardware revision + * @sub_system_device - PCI subsystem Device ID + * @sub_system_vendor - PCI subsystem Vendor ID + * @rsvd0 - reserved + * @firmware_version - firmware version + * @bios_version - BIOS version + * @driver_version - driver version - 32 ASCII characters + * @rsvd1 - reserved + * @scsi_id - scsi id of adapter 0 + * @rsvd2 - reserved + * @pci_information - pci info (2nd revision) + */ +struct mpt2_ioctl_iocinfo { + struct mpt2_ioctl_header hdr; + uint32_t adapter_type; + uint32_t port_number; + uint32_t pci_id; + uint32_t hw_rev; + uint32_t subsystem_device; + uint32_t subsystem_vendor; + uint32_t rsvd0; + uint32_t firmware_version; + uint32_t bios_version; + uint8_t driver_version[MPT2_IOCTL_VERSION_LENGTH]; + uint8_t rsvd1; + uint8_t scsi_id; + uint16_t rsvd2; + struct mpt2_ioctl_pci_info pci_information; +}; + + +/* number of event log entries */ +#define MPT2SAS_CTL_EVENT_LOG_SIZE (50) + +/** + * struct mpt2_ioctl_eventquery - query event count and type + * @hdr - generic header + * @event_entries - number of events returned by get_event_report + * @rsvd - reserved + * @event_types - type of events currently being captured + */ +struct mpt2_ioctl_eventquery { + struct mpt2_ioctl_header hdr; + uint16_t event_entries; + uint16_t rsvd; + uint32_t event_types[MPI2_EVENT_NOTIFY_EVENTMASK_WORDS]; +}; + +/** + * struct mpt2_ioctl_eventenable - enable/disable event capturing + * @hdr - generic header + * @event_types - toggle off/on type of events to be captured + */ +struct mpt2_ioctl_eventenable { + struct mpt2_ioctl_header hdr; + uint32_t event_types[4]; +}; + +#define MPT2_EVENT_DATA_SIZE (192) +/** + * struct MPT2_IOCTL_EVENTS - + * @event - the event that was reported + * @context - unique value for each event assigned by driver + * @data - event data returned in fw reply message + */ +struct MPT2_IOCTL_EVENTS { + uint32_t event; + uint32_t context; + uint8_t data[MPT2_EVENT_DATA_SIZE]; +}; + +/** + * struct mpt2_ioctl_eventreport - returing event log + * @hdr - generic header + * @event_data - (see struct MPT2_IOCTL_EVENTS) + */ +struct mpt2_ioctl_eventreport { + struct mpt2_ioctl_header hdr; + struct MPT2_IOCTL_EVENTS event_data[1]; +}; + +/** + * struct mpt2_ioctl_command - generic mpt firmware passthru ioclt + * @hdr - generic header + * @timeout - command timeout in seconds. (if zero then use driver default + * value). + * @reply_frame_buf_ptr - reply location + * @data_in_buf_ptr - destination for read + * @data_out_buf_ptr - data source for write + * @sense_data_ptr - sense data location + * @max_reply_bytes - maximum number of reply bytes to be sent to app. + * @data_in_size - number bytes for data transfer in (read) + * @data_out_size - number bytes for data transfer out (write) + * @max_sense_bytes - maximum number of bytes for auto sense buffers + * @data_sge_offset - offset in words from the start of the request message to + * the first SGL + * @mf[1]; + */ +struct mpt2_ioctl_command { + struct mpt2_ioctl_header hdr; + uint32_t timeout; + void __user *reply_frame_buf_ptr; + void __user *data_in_buf_ptr; + void __user *data_out_buf_ptr; + void __user *sense_data_ptr; + uint32_t max_reply_bytes; + uint32_t data_in_size; + uint32_t data_out_size; + uint32_t max_sense_bytes; + uint32_t data_sge_offset; + uint8_t mf[1]; +}; + +#ifdef CONFIG_COMPAT +struct mpt2_ioctl_command32 { + struct mpt2_ioctl_header hdr; + uint32_t timeout; + uint32_t reply_frame_buf_ptr; + uint32_t data_in_buf_ptr; + uint32_t data_out_buf_ptr; + uint32_t sense_data_ptr; + uint32_t max_reply_bytes; + uint32_t data_in_size; + uint32_t data_out_size; + uint32_t max_sense_bytes; + uint32_t data_sge_offset; + uint8_t mf[1]; +}; +#endif + +/** + * struct mpt2_ioctl_btdh_mapping - mapping info + * @hdr - generic header + * @id - target device identification number + * @bus - SCSI bus number that the target device exists on + * @handle - device handle for the target device + * @rsvd - reserved + * + * To obtain a bus/id the application sets + * handle to valid handle, and bus/id to 0xFFFF. + * + * To obtain the device handle the application sets + * bus/id valid value, and the handle to 0xFFFF. + */ +struct mpt2_ioctl_btdh_mapping { + struct mpt2_ioctl_header hdr; + uint32_t id; + uint32_t bus; + uint16_t handle; + uint16_t rsvd; +}; + + +/* status bits for ioc->diag_buffer_status */ +#define MPT2_DIAG_BUFFER_IS_REGISTERED (0x01) +#define MPT2_DIAG_BUFFER_IS_RELEASED (0x02) + +/* application flags for mpt2_diag_register, mpt2_diag_query */ +#define MPT2_APP_FLAGS_APP_OWNED (0x0001) +#define MPT2_APP_FLAGS_BUFFER_VALID (0x0002) +#define MPT2_APP_FLAGS_FW_BUFFER_ACCESS (0x0004) + +/* flags for mpt2_diag_read_buffer */ +#define MPT2_FLAGS_REREGISTER (0x0001) + +#define MPT2_PRODUCT_SPECIFIC_DWORDS 23 + +/** + * struct mpt2_diag_register - application register with driver + * @hdr - generic header + * @reserved - + * @buffer_type - specifies either TRACE or SNAPSHOT + * @application_flags - misc flags + * @diagnostic_flags - specifies flags affecting command processing + * @product_specific - product specific information + * @requested_buffer_size - buffers size in bytes + * @unique_id - tag specified by application that is used to signal ownership + * of the buffer. + * + * This will allow the driver to setup any required buffers that will be + * needed by firmware to communicate with the driver. + */ +struct mpt2_diag_register { + struct mpt2_ioctl_header hdr; + uint8_t reserved; + uint8_t buffer_type; + uint16_t application_flags; + uint32_t diagnostic_flags; + uint32_t product_specific[MPT2_PRODUCT_SPECIFIC_DWORDS]; + uint32_t requested_buffer_size; + uint32_t unique_id; +}; + +/** + * struct mpt2_diag_unregister - application unregister with driver + * @hdr - generic header + * @unique_id - tag uniquely identifies the buffer to be unregistered + * + * This will allow the driver to cleanup any memory allocated for diag + * messages and to free up any resources. + */ +struct mpt2_diag_unregister { + struct mpt2_ioctl_header hdr; + uint32_t unique_id; +}; + +/** + * struct mpt2_diag_query - query relevant info associated with diag buffers + * @hdr - generic header + * @reserved - + * @buffer_type - specifies either TRACE or SNAPSHOT + * @application_flags - misc flags + * @diagnostic_flags - specifies flags affecting command processing + * @product_specific - product specific information + * @total_buffer_size - diag buffer size in bytes + * @driver_added_buffer_size - size of extra space appended to end of buffer + * @unique_id - unique id associated with this buffer. + * + * The application will send only buffer_type and unique_id. Driver will + * inspect unique_id first, if valid, fill in all the info. If unique_id is + * 0x00, the driver will return info specified by Buffer Type. + */ +struct mpt2_diag_query { + struct mpt2_ioctl_header hdr; + uint8_t reserved; + uint8_t buffer_type; + uint16_t application_flags; + uint32_t diagnostic_flags; + uint32_t product_specific[MPT2_PRODUCT_SPECIFIC_DWORDS]; + uint32_t total_buffer_size; + uint32_t driver_added_buffer_size; + uint32_t unique_id; +}; + +/** + * struct mpt2_diag_release - request to send Diag Release Message to firmware + * @hdr - generic header + * @unique_id - tag uniquely identifies the buffer to be released + * + * This allows ownership of the specified buffer to returned to the driver, + * allowing an application to read the buffer without fear that firmware is + * overwritting information in the buffer. + */ +struct mpt2_diag_release { + struct mpt2_ioctl_header hdr; + uint32_t unique_id; +}; + +/** + * struct mpt2_diag_read_buffer - request for copy of the diag buffer + * @hdr - generic header + * @status - + * @reserved - + * @flags - misc flags + * @starting_offset - starting offset within drivers buffer where to start + * reading data at into the specified application buffer + * @bytes_to_read - number of bytes to copy from the drivers buffer into the + * application buffer starting at starting_offset. + * @unique_id - unique id associated with this buffer. + * @diagnostic_data - data payload + */ +struct mpt2_diag_read_buffer { + struct mpt2_ioctl_header hdr; + uint8_t status; + uint8_t reserved; + uint16_t flags; + uint32_t starting_offset; + uint32_t bytes_to_read; + uint32_t unique_id; + uint32_t diagnostic_data[1]; +}; + +#endif /* MPT2SAS_CTL_H_INCLUDED */ diff --git a/drivers/scsi/mpt2sas/mpt2sas_debug.h b/drivers/scsi/mpt2sas/mpt2sas_debug.h new file mode 100644 index 0000000..ad32509 --- /dev/null +++ b/drivers/scsi/mpt2sas/mpt2sas_debug.h @@ -0,0 +1,181 @@ +/* + * Logging Support for MPT (Message Passing Technology) based controllers + * + * This code is based on drivers/scsi/mpt2sas/mpt2_debug.c + * Copyright (C) 2007-2008 LSI Corporation + * (mailto:DL-MPTFusionLinux@lsi.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * NO WARRANTY + * THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR + * CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT + * LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT, + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is + * solely responsible for determining the appropriateness of using and + * distributing the Program and assumes all risks associated with its + * exercise of rights under this Agreement, including but not limited to + * the risks and costs of program errors, damage to or loss of data, + * programs or equipment, and unavailability or interruption of operations. + + * DISCLAIMER OF LIABILITY + * NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR + * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE + * USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED + * HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES + + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, + * USA. + */ + +#ifndef MPT2SAS_DEBUG_H_INCLUDED +#define MPT2SAS_DEBUG_H_INCLUDED + +#define MPT_DEBUG 0x00000001 +#define MPT_DEBUG_MSG_FRAME 0x00000002 +#define MPT_DEBUG_SG 0x00000004 +#define MPT_DEBUG_EVENTS 0x00000008 +#define MPT_DEBUG_EVENT_WORK_TASK 0x00000010 +#define MPT_DEBUG_INIT 0x00000020 +#define MPT_DEBUG_EXIT 0x00000040 +#define MPT_DEBUG_FAIL 0x00000080 +#define MPT_DEBUG_TM 0x00000100 +#define MPT_DEBUG_REPLY 0x00000200 +#define MPT_DEBUG_HANDSHAKE 0x00000400 +#define MPT_DEBUG_CONFIG 0x00000800 +#define MPT_DEBUG_DL 0x00001000 +#define MPT_DEBUG_RESET 0x00002000 +#define MPT_DEBUG_SCSI 0x00004000 +#define MPT_DEBUG_IOCTL 0x00008000 +#define MPT_DEBUG_CSMISAS 0x00010000 +#define MPT_DEBUG_SAS 0x00020000 +#define MPT_DEBUG_TRANSPORT 0x00040000 +#define MPT_DEBUG_TASK_SET_FULL 0x00080000 + +#define MPT_DEBUG_TARGET_MODE 0x00100000 + + +/* + * CONFIG_SCSI_MPT2SAS_LOGGING - enabled in Kconfig + */ + +#ifdef CONFIG_SCSI_MPT2SAS_LOGGING +#define MPT_CHECK_LOGGING(IOC, CMD, BITS) \ +{ \ + if (IOC->logging_level & BITS) \ + CMD; \ +} +#else +#define MPT_CHECK_LOGGING(IOC, CMD, BITS) +#endif /* CONFIG_SCSI_MPT2SAS_LOGGING */ + + +/* + * debug macros + */ + +#define dprintk(IOC, CMD) \ + MPT_CHECK_LOGGING(IOC, CMD, MPT_DEBUG) + +#define dsgprintk(IOC, CMD) \ + MPT_CHECK_LOGGING(IOC, CMD, MPT_DEBUG_SG) + +#define devtprintk(IOC, CMD) \ + MPT_CHECK_LOGGING(IOC, CMD, MPT_DEBUG_EVENTS) + +#define dewtprintk(IOC, CMD) \ + MPT_CHECK_LOGGING(IOC, CMD, MPT_DEBUG_EVENT_WORK_TASK) + +#define dinitprintk(IOC, CMD) \ + MPT_CHECK_LOGGING(IOC, CMD, MPT_DEBUG_INIT) + +#define dexitprintk(IOC, CMD) \ + MPT_CHECK_LOGGING(IOC, CMD, MPT_DEBUG_EXIT) + +#define dfailprintk(IOC, CMD) \ + MPT_CHECK_LOGGING(IOC, CMD, MPT_DEBUG_FAIL) + +#define dtmprintk(IOC, CMD) \ + MPT_CHECK_LOGGING(IOC, CMD, MPT_DEBUG_TM) + +#define dreplyprintk(IOC, CMD) \ + MPT_CHECK_LOGGING(IOC, CMD, MPT_DEBUG_REPLY) + +#define dhsprintk(IOC, CMD) \ + MPT_CHECK_LOGGING(IOC, CMD, MPT_DEBUG_HANDSHAKE) + +#define dcprintk(IOC, CMD) \ + MPT_CHECK_LOGGING(IOC, CMD, MPT_DEBUG_CONFIG) + +#define ddlprintk(IOC, CMD) \ + MPT_CHECK_LOGGING(IOC, CMD, MPT_DEBUG_DL) + +#define drsprintk(IOC, CMD) \ + MPT_CHECK_LOGGING(IOC, CMD, MPT_DEBUG_RESET) + +#define dsprintk(IOC, CMD) \ + MPT_CHECK_LOGGING(IOC, CMD, MPT_DEBUG_SCSI) + +#define dctlprintk(IOC, CMD) \ + MPT_CHECK_LOGGING(IOC, CMD, MPT_DEBUG_IOCTL) + +#define dcsmisasprintk(IOC, CMD) \ + MPT_CHECK_LOGGING(IOC, CMD, MPT_DEBUG_CSMISAS) + +#define dsasprintk(IOC, CMD) \ + MPT_CHECK_LOGGING(IOC, CMD, MPT_DEBUG_SAS) + +#define dsastransport(IOC, CMD) \ + MPT_CHECK_LOGGING(IOC, CMD, MPT_DEBUG_SAS_WIDE) + +#define dmfprintk(IOC, CMD) \ + MPT_CHECK_LOGGING(IOC, CMD, MPT_DEBUG_MSG_FRAME) + +#define dtsfprintk(IOC, CMD) \ + MPT_CHECK_LOGGING(IOC, CMD, MPT_DEBUG_TASK_SET_FULL) + +#define dtransportprintk(IOC, CMD) \ + MPT_CHECK_LOGGING(IOC, CMD, MPT_DEBUG_TRANSPORT) + +#define dTMprintk(IOC, CMD) \ + MPT_CHECK_LOGGING(IOC, CMD, MPT_DEBUG_TARGET_MODE) + +/* inline functions for dumping debug data*/ +#ifdef CONFIG_SCSI_MPT2SAS_LOGGING +/** + * _debug_dump_mf - print message frame contents + * @mpi_request: pointer to message frame + * @sz: number of dwords + */ +static inline void +_debug_dump_mf(void *mpi_request, int sz) +{ + int i; + u32 *mfp = (u32 *)mpi_request; + + printk(KERN_INFO "mf:\n\t"); + for (i = 0; i < sz; i++) { + if (i && ((i % 8) == 0)) + printk("\n\t"); + printk("%08x ", le32_to_cpu(mfp[i])); + } + printk("\n"); +} +#else +#define _debug_dump_mf(mpi_request, sz) +#endif /* CONFIG_SCSI_MPT2SAS_LOGGING */ + +#endif /* MPT2SAS_DEBUG_H_INCLUDED */ diff --git a/drivers/scsi/mpt2sas/mpt2sas_scsih.c b/drivers/scsi/mpt2sas/mpt2sas_scsih.c new file mode 100644 index 0000000..50865a8 --- /dev/null +++ b/drivers/scsi/mpt2sas/mpt2sas_scsih.c @@ -0,0 +1,5687 @@ +/* + * Scsi Host Layer for MPT (Message Passing Technology) based controllers + * + * This code is based on drivers/scsi/mpt2sas/mpt2_scsih.c + * Copyright (C) 2007-2008 LSI Corporation + * (mailto:DL-MPTFusionLinux@lsi.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * NO WARRANTY + * THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR + * CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT + * LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT, + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is + * solely responsible for determining the appropriateness of using and + * distributing the Program and assumes all risks associated with its + * exercise of rights under this Agreement, including but not limited to + * the risks and costs of program errors, damage to or loss of data, + * programs or equipment, and unavailability or interruption of operations. + + * DISCLAIMER OF LIABILITY + * NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR + * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE + * USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED + * HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES + + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, + * USA. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "mpt2sas_base.h" + +MODULE_AUTHOR(MPT2SAS_AUTHOR); +MODULE_DESCRIPTION(MPT2SAS_DESCRIPTION); +MODULE_LICENSE("GPL"); +MODULE_VERSION(MPT2SAS_DRIVER_VERSION); + +#define RAID_CHANNEL 1 + +/* forward proto's */ +static void _scsih_expander_node_remove(struct MPT2SAS_ADAPTER *ioc, + struct _sas_node *sas_expander); +static void _firmware_event_work(struct work_struct *work); + +/* global parameters */ +LIST_HEAD(ioc_list); + +/* local parameters */ +static u32 logging_level; +static u8 scsi_io_cb_idx = -1; +static u8 tm_cb_idx = -1; +static u8 ctl_cb_idx = -1; +static u8 base_cb_idx = -1; +static u8 transport_cb_idx = -1; +static u8 config_cb_idx = -1; +static int mpt_ids; + +/* command line options */ +MODULE_PARM_DESC(logging_level, " bits for enabling additional logging info " + "(default=0)"); + +/* scsi-mid layer global parmeter is max_report_luns, which is 511 */ +#define MPT2SAS_MAX_LUN (16895) +static int max_lun = MPT2SAS_MAX_LUN; +module_param(max_lun, int, 0); +MODULE_PARM_DESC(max_lun, " max lun, default=16895 "); + +/** + * struct sense_info - common structure for obtaining sense keys + * @skey: sense key + * @asc: additional sense code + * @ascq: additional sense code qualifier + */ +struct sense_info { + u8 skey; + u8 asc; + u8 ascq; +}; + + +#define MPT2SAS_RESCAN_AFTER_HOST_RESET (0xFFFF) +/** + * struct fw_event_work - firmware event struct + * @list: link list framework + * @work: work object (ioc->fault_reset_work_q) + * @ioc: per adapter object + * @VF_ID: virtual function id + * @host_reset_handling: handling events during host reset + * @ignore: flag meaning this event has been marked to ignore + * @event: firmware event MPI2_EVENT_XXX defined in mpt2_ioc.h + * @event_data: reply event data payload follows + * + * This object stored on ioc->fw_event_list. + */ +struct fw_event_work { + struct list_head list; + struct delayed_work work; + struct MPT2SAS_ADAPTER *ioc; + u8 VF_ID; + u8 host_reset_handling; + u8 ignore; + u16 event; + void *event_data; +}; + +/** + * struct _scsi_io_transfer - scsi io transfer + * @handle: sas device handle (assigned by firmware) + * @is_raid: flag set for hidden raid components + * @dir: DMA_TO_DEVICE, DMA_FROM_DEVICE, + * @data_length: data transfer length + * @data_dma: dma pointer to data + * @sense: sense data + * @lun: lun number + * @cdb_length: cdb length + * @cdb: cdb contents + * @valid_reply: flag set for reply message + * @timeout: timeout for this command + * @sense_length: sense length + * @ioc_status: ioc status + * @scsi_state: scsi state + * @scsi_status: scsi staus + * @log_info: log information + * @transfer_length: data length transfer when there is a reply message + * + * Used for sending internal scsi commands to devices within this module. + * Refer to _scsi_send_scsi_io(). + */ +struct _scsi_io_transfer { + u16 handle; + u8 is_raid; + enum dma_data_direction dir; + u32 data_length; + dma_addr_t data_dma; + u8 sense[SCSI_SENSE_BUFFERSIZE]; + u32 lun; + u8 cdb_length; + u8 cdb[32]; + u8 timeout; + u8 valid_reply; + /* the following bits are only valid when 'valid_reply = 1' */ + u32 sense_length; + u16 ioc_status; + u8 scsi_state; + u8 scsi_status; + u32 log_info; + u32 transfer_length; +}; + +/* + * The pci device ids are defined in mpi/mpi2_cnfg.h. + */ +static struct pci_device_id scsih_pci_table[] = { + { MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2004, + PCI_ANY_ID, PCI_ANY_ID }, + /* Falcon ~ 2008*/ + { MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2008, + PCI_ANY_ID, PCI_ANY_ID }, + /* Liberator ~ 2108 */ + { MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2108_1, + PCI_ANY_ID, PCI_ANY_ID }, + { MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2108_2, + PCI_ANY_ID, PCI_ANY_ID }, + { MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2108_3, + PCI_ANY_ID, PCI_ANY_ID }, + { MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2116_1, + PCI_ANY_ID, PCI_ANY_ID }, + { MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2116_2, + PCI_ANY_ID, PCI_ANY_ID }, + {0} /* Terminating entry */ +}; +MODULE_DEVICE_TABLE(pci, scsih_pci_table); + +/** + * scsih_set_debug_level - global setting of ioc->logging_level. + * + * Note: The logging levels are defined in mpt2sas_debug.h. + */ +static int +scsih_set_debug_level(const char *val, struct kernel_param *kp) +{ + int ret = param_set_int(val, kp); + struct MPT2SAS_ADAPTER *ioc; + + if (ret) + return ret; + + printk(KERN_INFO "setting logging_level(0x%08x)\n", logging_level); + list_for_each_entry(ioc, &ioc_list, list) + ioc->logging_level = logging_level; + return 0; +} +module_param_call(logging_level, scsih_set_debug_level, param_get_int, + &logging_level, 0644); + +/** + * _scsih_srch_boot_sas_address - search based on sas_address + * @sas_address: sas address + * @boot_device: boot device object from bios page 2 + * + * Returns 1 when there's a match, 0 means no match. + */ +static inline int +_scsih_srch_boot_sas_address(u64 sas_address, + Mpi2BootDeviceSasWwid_t *boot_device) +{ + return (sas_address == le64_to_cpu(boot_device->SASAddress)) ? 1 : 0; +} + +/** + * _scsih_srch_boot_device_name - search based on device name + * @device_name: device name specified in INDENTIFY fram + * @boot_device: boot device object from bios page 2 + * + * Returns 1 when there's a match, 0 means no match. + */ +static inline int +_scsih_srch_boot_device_name(u64 device_name, + Mpi2BootDeviceDeviceName_t *boot_device) +{ + return (device_name == le64_to_cpu(boot_device->DeviceName)) ? 1 : 0; +} + +/** + * _scsih_srch_boot_encl_slot - search based on enclosure_logical_id/slot + * @enclosure_logical_id: enclosure logical id + * @slot_number: slot number + * @boot_device: boot device object from bios page 2 + * + * Returns 1 when there's a match, 0 means no match. + */ +static inline int +_scsih_srch_boot_encl_slot(u64 enclosure_logical_id, u16 slot_number, + Mpi2BootDeviceEnclosureSlot_t *boot_device) +{ + return (enclosure_logical_id == le64_to_cpu(boot_device-> + EnclosureLogicalID) && slot_number == le16_to_cpu(boot_device-> + SlotNumber)) ? 1 : 0; +} + +/** + * _scsih_is_boot_device - search for matching boot device. + * @sas_address: sas address + * @device_name: device name specified in INDENTIFY fram + * @enclosure_logical_id: enclosure logical id + * @slot_number: slot number + * @form: specifies boot device form + * @boot_device: boot device object from bios page 2 + * + * Returns 1 when there's a match, 0 means no match. + */ +static int +_scsih_is_boot_device(u64 sas_address, u64 device_name, + u64 enclosure_logical_id, u16 slot, u8 form, + Mpi2BiosPage2BootDevice_t *boot_device) +{ + int rc = 0; + + switch (form) { + case MPI2_BIOSPAGE2_FORM_SAS_WWID: + if (!sas_address) + break; + rc = _scsih_srch_boot_sas_address( + sas_address, &boot_device->SasWwid); + break; + case MPI2_BIOSPAGE2_FORM_ENCLOSURE_SLOT: + if (!enclosure_logical_id) + break; + rc = _scsih_srch_boot_encl_slot( + enclosure_logical_id, + slot, &boot_device->EnclosureSlot); + break; + case MPI2_BIOSPAGE2_FORM_DEVICE_NAME: + if (!device_name) + break; + rc = _scsih_srch_boot_device_name( + device_name, &boot_device->DeviceName); + break; + case MPI2_BIOSPAGE2_FORM_NO_DEVICE_SPECIFIED: + break; + } + + return rc; +} + +/** + * _scsih_determine_boot_device - determine boot device. + * @ioc: per adapter object + * @device: either sas_device or raid_device object + * @is_raid: [flag] 1 = raid object, 0 = sas object + * + * Determines whether this device should be first reported device to + * to scsi-ml or sas transport, this purpose is for persistant boot device. + * There are primary, alternate, and current entries in bios page 2. The order + * priority is primary, alternate, then current. This routine saves + * the corresponding device object and is_raid flag in the ioc object. + * The saved data to be used later in _scsih_probe_boot_devices(). + */ +static void +_scsih_determine_boot_device(struct MPT2SAS_ADAPTER *ioc, + void *device, u8 is_raid) +{ + struct _sas_device *sas_device; + struct _raid_device *raid_device; + u64 sas_address; + u64 device_name; + u64 enclosure_logical_id; + u16 slot; + + /* only process this function when driver loads */ + if (!ioc->wait_for_port_enable_to_complete) + return; + + if (!is_raid) { + sas_device = device; + sas_address = sas_device->sas_address; + device_name = sas_device->device_name; + enclosure_logical_id = sas_device->enclosure_logical_id; + slot = sas_device->slot; + } else { + raid_device = device; + sas_address = raid_device->wwid; + device_name = 0; + enclosure_logical_id = 0; + slot = 0; + } + + if (!ioc->req_boot_device.device) { + if (_scsih_is_boot_device(sas_address, device_name, + enclosure_logical_id, slot, + (ioc->bios_pg2.ReqBootDeviceForm & + MPI2_BIOSPAGE2_FORM_MASK), + &ioc->bios_pg2.RequestedBootDevice)) { + dinitprintk(ioc, printk(MPT2SAS_DEBUG_FMT + "%s: req_boot_device(0x%016llx)\n", + ioc->name, __func__, + (unsigned long long)sas_address)); + ioc->req_boot_device.device = device; + ioc->req_boot_device.is_raid = is_raid; + } + } + + if (!ioc->req_alt_boot_device.device) { + if (_scsih_is_boot_device(sas_address, device_name, + enclosure_logical_id, slot, + (ioc->bios_pg2.ReqAltBootDeviceForm & + MPI2_BIOSPAGE2_FORM_MASK), + &ioc->bios_pg2.RequestedAltBootDevice)) { + dinitprintk(ioc, printk(MPT2SAS_DEBUG_FMT + "%s: req_alt_boot_device(0x%016llx)\n", + ioc->name, __func__, + (unsigned long long)sas_address)); + ioc->req_alt_boot_device.device = device; + ioc->req_alt_boot_device.is_raid = is_raid; + } + } + + if (!ioc->current_boot_device.device) { + if (_scsih_is_boot_device(sas_address, device_name, + enclosure_logical_id, slot, + (ioc->bios_pg2.CurrentBootDeviceForm & + MPI2_BIOSPAGE2_FORM_MASK), + &ioc->bios_pg2.CurrentBootDevice)) { + dinitprintk(ioc, printk(MPT2SAS_DEBUG_FMT + "%s: current_boot_device(0x%016llx)\n", + ioc->name, __func__, + (unsigned long long)sas_address)); + ioc->current_boot_device.device = device; + ioc->current_boot_device.is_raid = is_raid; + } + } +} + +/** + * mpt2sas_scsih_sas_device_find_by_sas_address - sas device search + * @ioc: per adapter object + * @sas_address: sas address + * Context: Calling function should acquire ioc->sas_device_lock + * + * This searches for sas_device based on sas_address, then return sas_device + * object. + */ +struct _sas_device * +mpt2sas_scsih_sas_device_find_by_sas_address(struct MPT2SAS_ADAPTER *ioc, + u64 sas_address) +{ + struct _sas_device *sas_device, *r; + + r = NULL; + /* check the sas_device_init_list */ + list_for_each_entry(sas_device, &ioc->sas_device_init_list, + list) { + if (sas_device->sas_address != sas_address) + continue; + r = sas_device; + goto out; + } + + /* then check the sas_device_list */ + list_for_each_entry(sas_device, &ioc->sas_device_list, list) { + if (sas_device->sas_address != sas_address) + continue; + r = sas_device; + goto out; + } + out: + return r; +} + +/** + * _scsih_sas_device_find_by_handle - sas device search + * @ioc: per adapter object + * @handle: sas device handle (assigned by firmware) + * Context: Calling function should acquire ioc->sas_device_lock + * + * This searches for sas_device based on sas_address, then return sas_device + * object. + */ +static struct _sas_device * +_scsih_sas_device_find_by_handle(struct MPT2SAS_ADAPTER *ioc, u16 handle) +{ + struct _sas_device *sas_device, *r; + + r = NULL; + if (ioc->wait_for_port_enable_to_complete) { + list_for_each_entry(sas_device, &ioc->sas_device_init_list, + list) { + if (sas_device->handle != handle) + continue; + r = sas_device; + goto out; + } + } else { + list_for_each_entry(sas_device, &ioc->sas_device_list, list) { + if (sas_device->handle != handle) + continue; + r = sas_device; + goto out; + } + } + + out: + return r; +} + +/** + * _scsih_sas_device_remove - remove sas_device from list. + * @ioc: per adapter object + * @sas_device: the sas_device object + * Context: This function will acquire ioc->sas_device_lock. + * + * Removing object and freeing associated memory from the ioc->sas_device_list. + */ +static void +_scsih_sas_device_remove(struct MPT2SAS_ADAPTER *ioc, + struct _sas_device *sas_device) +{ + unsigned long flags; + + spin_lock_irqsave(&ioc->sas_device_lock, flags); + list_del(&sas_device->list); + memset(sas_device, 0, sizeof(struct _sas_device)); + kfree(sas_device); + spin_unlock_irqrestore(&ioc->sas_device_lock, flags); +} + +/** + * _scsih_sas_device_add - insert sas_device to the list. + * @ioc: per adapter object + * @sas_device: the sas_device object + * Context: This function will acquire ioc->sas_device_lock. + * + * Adding new object to the ioc->sas_device_list. + */ +static void +_scsih_sas_device_add(struct MPT2SAS_ADAPTER *ioc, + struct _sas_device *sas_device) +{ + unsigned long flags; + u16 handle, parent_handle; + u64 sas_address; + + dewtprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s: handle" + "(0x%04x), sas_addr(0x%016llx)\n", ioc->name, __func__, + sas_device->handle, (unsigned long long)sas_device->sas_address)); + + spin_lock_irqsave(&ioc->sas_device_lock, flags); + list_add_tail(&sas_device->list, &ioc->sas_device_list); + spin_unlock_irqrestore(&ioc->sas_device_lock, flags); + + handle = sas_device->handle; + parent_handle = sas_device->parent_handle; + sas_address = sas_device->sas_address; + if (!mpt2sas_transport_port_add(ioc, handle, parent_handle)) { + _scsih_sas_device_remove(ioc, sas_device); + } else if (!sas_device->starget) { + mpt2sas_transport_port_remove(ioc, sas_address, parent_handle); + _scsih_sas_device_remove(ioc, sas_device); + } +} + +/** + * _scsih_sas_device_init_add - insert sas_device to the list. + * @ioc: per adapter object + * @sas_device: the sas_device object + * Context: This function will acquire ioc->sas_device_lock. + * + * Adding new object at driver load time to the ioc->sas_device_init_list. + */ +static void +_scsih_sas_device_init_add(struct MPT2SAS_ADAPTER *ioc, + struct _sas_device *sas_device) +{ + unsigned long flags; + + dewtprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s: handle" + "(0x%04x), sas_addr(0x%016llx)\n", ioc->name, __func__, + sas_device->handle, (unsigned long long)sas_device->sas_address)); + + spin_lock_irqsave(&ioc->sas_device_lock, flags); + list_add_tail(&sas_device->list, &ioc->sas_device_init_list); + spin_unlock_irqrestore(&ioc->sas_device_lock, flags); + _scsih_determine_boot_device(ioc, sas_device, 0); +} + +/** + * mpt2sas_scsih_expander_find_by_handle - expander device search + * @ioc: per adapter object + * @handle: expander handle (assigned by firmware) + * Context: Calling function should acquire ioc->sas_device_lock + * + * This searches for expander device based on handle, then returns the + * sas_node object. + */ +struct _sas_node * +mpt2sas_scsih_expander_find_by_handle(struct MPT2SAS_ADAPTER *ioc, u16 handle) +{ + struct _sas_node *sas_expander, *r; + + r = NULL; + list_for_each_entry(sas_expander, &ioc->sas_expander_list, list) { + if (sas_expander->handle != handle) + continue; + r = sas_expander; + goto out; + } + out: + return r; +} + +/** + * _scsih_raid_device_find_by_id - raid device search + * @ioc: per adapter object + * @id: sas device target id + * @channel: sas device channel + * Context: Calling function should acquire ioc->raid_device_lock + * + * This searches for raid_device based on target id, then return raid_device + * object. + */ +static struct _raid_device * +_scsih_raid_device_find_by_id(struct MPT2SAS_ADAPTER *ioc, int id, int channel) +{ + struct _raid_device *raid_device, *r; + + r = NULL; + list_for_each_entry(raid_device, &ioc->raid_device_list, list) { + if (raid_device->id == id && raid_device->channel == channel) { + r = raid_device; + goto out; + } + } + + out: + return r; +} + +/** + * _scsih_raid_device_find_by_handle - raid device search + * @ioc: per adapter object + * @handle: sas device handle (assigned by firmware) + * Context: Calling function should acquire ioc->raid_device_lock + * + * This searches for raid_device based on handle, then return raid_device + * object. + */ +static struct _raid_device * +_scsih_raid_device_find_by_handle(struct MPT2SAS_ADAPTER *ioc, u16 handle) +{ + struct _raid_device *raid_device, *r; + + r = NULL; + list_for_each_entry(raid_device, &ioc->raid_device_list, list) { + if (raid_device->handle != handle) + continue; + r = raid_device; + goto out; + } + + out: + return r; +} + +/** + * _scsih_raid_device_find_by_wwid - raid device search + * @ioc: per adapter object + * @handle: sas device handle (assigned by firmware) + * Context: Calling function should acquire ioc->raid_device_lock + * + * This searches for raid_device based on wwid, then return raid_device + * object. + */ +static struct _raid_device * +_scsih_raid_device_find_by_wwid(struct MPT2SAS_ADAPTER *ioc, u64 wwid) +{ + struct _raid_device *raid_device, *r; + + r = NULL; + list_for_each_entry(raid_device, &ioc->raid_device_list, list) { + if (raid_device->wwid != wwid) + continue; + r = raid_device; + goto out; + } + + out: + return r; +} + +/** + * _scsih_raid_device_add - add raid_device object + * @ioc: per adapter object + * @raid_device: raid_device object + * + * This is added to the raid_device_list link list. + */ +static void +_scsih_raid_device_add(struct MPT2SAS_ADAPTER *ioc, + struct _raid_device *raid_device) +{ + unsigned long flags; + + dewtprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s: handle" + "(0x%04x), wwid(0x%016llx)\n", ioc->name, __func__, + raid_device->handle, (unsigned long long)raid_device->wwid)); + + spin_lock_irqsave(&ioc->raid_device_lock, flags); + list_add_tail(&raid_device->list, &ioc->raid_device_list); + spin_unlock_irqrestore(&ioc->raid_device_lock, flags); +} + +/** + * _scsih_raid_device_remove - delete raid_device object + * @ioc: per adapter object + * @raid_device: raid_device object + * + * This is removed from the raid_device_list link list. + */ +static void +_scsih_raid_device_remove(struct MPT2SAS_ADAPTER *ioc, + struct _raid_device *raid_device) +{ + unsigned long flags; + + spin_lock_irqsave(&ioc->raid_device_lock, flags); + list_del(&raid_device->list); + memset(raid_device, 0, sizeof(struct _raid_device)); + kfree(raid_device); + spin_unlock_irqrestore(&ioc->raid_device_lock, flags); +} + +/** + * mpt2sas_scsih_expander_find_by_sas_address - expander device search + * @ioc: per adapter object + * @sas_address: sas address + * Context: Calling function should acquire ioc->sas_node_lock. + * + * This searches for expander device based on sas_address, then returns the + * sas_node object. + */ +struct _sas_node * +mpt2sas_scsih_expander_find_by_sas_address(struct MPT2SAS_ADAPTER *ioc, + u64 sas_address) +{ + struct _sas_node *sas_expander, *r; + + r = NULL; + list_for_each_entry(sas_expander, &ioc->sas_expander_list, list) { + if (sas_expander->sas_address != sas_address) + continue; + r = sas_expander; + goto out; + } + out: + return r; +} + +/** + * _scsih_expander_node_add - insert expander device to the list. + * @ioc: per adapter object + * @sas_expander: the sas_device object + * Context: This function will acquire ioc->sas_node_lock. + * + * Adding new object to the ioc->sas_expander_list. + * + * Return nothing. + */ +static void +_scsih_expander_node_add(struct MPT2SAS_ADAPTER *ioc, + struct _sas_node *sas_expander) +{ + unsigned long flags; + + spin_lock_irqsave(&ioc->sas_node_lock, flags); + list_add_tail(&sas_expander->list, &ioc->sas_expander_list); + spin_unlock_irqrestore(&ioc->sas_node_lock, flags); +} + +/** + * _scsih_is_end_device - determines if device is an end device + * @device_info: bitfield providing information about the device. + * Context: none + * + * Returns 1 if end device. + */ +static int +_scsih_is_end_device(u32 device_info) +{ + if (device_info & MPI2_SAS_DEVICE_INFO_END_DEVICE && + ((device_info & MPI2_SAS_DEVICE_INFO_SSP_TARGET) | + (device_info & MPI2_SAS_DEVICE_INFO_STP_TARGET) | + (device_info & MPI2_SAS_DEVICE_INFO_SATA_DEVICE))) + return 1; + else + return 0; +} + +/** + * _scsih_scsi_lookup_get - returns scmd entry + * @ioc: per adapter object + * @smid: system request message index + * Context: This function will acquire ioc->scsi_lookup_lock. + * + * Returns the smid stored scmd pointer. + */ +static struct scsi_cmnd * +_scsih_scsi_lookup_get(struct MPT2SAS_ADAPTER *ioc, u16 smid) +{ + unsigned long flags; + struct scsi_cmnd *scmd; + + spin_lock_irqsave(&ioc->scsi_lookup_lock, flags); + scmd = ioc->scsi_lookup[smid - 1].scmd; + spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags); + return scmd; +} + +/** + * mptscsih_getclear_scsi_lookup - returns scmd entry + * @ioc: per adapter object + * @smid: system request message index + * Context: This function will acquire ioc->scsi_lookup_lock. + * + * Returns the smid stored scmd pointer, as well as clearing the scmd pointer. + */ +static struct scsi_cmnd * +_scsih_scsi_lookup_getclear(struct MPT2SAS_ADAPTER *ioc, u16 smid) +{ + unsigned long flags; + struct scsi_cmnd *scmd; + + spin_lock_irqsave(&ioc->scsi_lookup_lock, flags); + scmd = ioc->scsi_lookup[smid - 1].scmd; + ioc->scsi_lookup[smid - 1].scmd = NULL; + spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags); + return scmd; +} + +/** + * _scsih_scsi_lookup_set - updates scmd entry in lookup + * @ioc: per adapter object + * @smid: system request message index + * @scmd: pointer to scsi command object + * Context: This function will acquire ioc->scsi_lookup_lock. + * + * This will save scmd pointer in the scsi_lookup array. + * + * Return nothing. + */ +static void +_scsih_scsi_lookup_set(struct MPT2SAS_ADAPTER *ioc, u16 smid, + struct scsi_cmnd *scmd) +{ + unsigned long flags; + + spin_lock_irqsave(&ioc->scsi_lookup_lock, flags); + ioc->scsi_lookup[smid - 1].scmd = scmd; + spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags); +} + +/** + * _scsih_scsi_lookup_find_by_scmd - scmd lookup + * @ioc: per adapter object + * @smid: system request message index + * @scmd: pointer to scsi command object + * Context: This function will acquire ioc->scsi_lookup_lock. + * + * This will search for a scmd pointer in the scsi_lookup array, + * returning the revelent smid. A returned value of zero means invalid. + */ +static u16 +_scsih_scsi_lookup_find_by_scmd(struct MPT2SAS_ADAPTER *ioc, struct scsi_cmnd + *scmd) +{ + u16 smid; + unsigned long flags; + int i; + + spin_lock_irqsave(&ioc->scsi_lookup_lock, flags); + smid = 0; + for (i = 0; i < ioc->request_depth; i++) { + if (ioc->scsi_lookup[i].scmd == scmd) { + smid = i + 1; + goto out; + } + } + out: + spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags); + return smid; +} + +/** + * _scsih_scsi_lookup_find_by_target - search for matching channel:id + * @ioc: per adapter object + * @id: target id + * @channel: channel + * Context: This function will acquire ioc->scsi_lookup_lock. + * + * This will search for a matching channel:id in the scsi_lookup array, + * returning 1 if found. + */ +static u8 +_scsih_scsi_lookup_find_by_target(struct MPT2SAS_ADAPTER *ioc, int id, + int channel) +{ + u8 found; + unsigned long flags; + int i; + + spin_lock_irqsave(&ioc->scsi_lookup_lock, flags); + found = 0; + for (i = 0 ; i < ioc->request_depth; i++) { + if (ioc->scsi_lookup[i].scmd && + (ioc->scsi_lookup[i].scmd->device->id == id && + ioc->scsi_lookup[i].scmd->device->channel == channel)) { + found = 1; + goto out; + } + } + out: + spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags); + return found; +} + +/** + * _scsih_get_chain_buffer_dma - obtain block of chains (dma address) + * @ioc: per adapter object + * @smid: system request message index + * + * Returns phys pointer to chain buffer. + */ +static dma_addr_t +_scsih_get_chain_buffer_dma(struct MPT2SAS_ADAPTER *ioc, u16 smid) +{ + return ioc->chain_dma + ((smid - 1) * (ioc->request_sz * + ioc->chains_needed_per_io)); +} + +/** + * _scsih_get_chain_buffer - obtain block of chains assigned to a mf request + * @ioc: per adapter object + * @smid: system request message index + * + * Returns virt pointer to chain buffer. + */ +static void * +_scsih_get_chain_buffer(struct MPT2SAS_ADAPTER *ioc, u16 smid) +{ + return (void *)(ioc->chain + ((smid - 1) * (ioc->request_sz * + ioc->chains_needed_per_io))); +} + +/** + * _scsih_build_scatter_gather - main sg creation routine + * @ioc: per adapter object + * @scmd: scsi command + * @smid: system request message index + * Context: none. + * + * The main routine that builds scatter gather table from a given + * scsi request sent via the .queuecommand main handler. + * + * Returns 0 success, anything else error + */ +static int +_scsih_build_scatter_gather(struct MPT2SAS_ADAPTER *ioc, + struct scsi_cmnd *scmd, u16 smid) +{ + Mpi2SCSIIORequest_t *mpi_request; + dma_addr_t chain_dma; + struct scatterlist *sg_scmd; + void *sg_local, *chain; + u32 chain_offset; + u32 chain_length; + u32 chain_flags; + u32 sges_left; + u32 sges_in_segment; + u32 sgl_flags; + u32 sgl_flags_last_element; + u32 sgl_flags_end_buffer; + + mpi_request = mpt2sas_base_get_msg_frame(ioc, smid); + + /* init scatter gather flags */ + sgl_flags = MPI2_SGE_FLAGS_SIMPLE_ELEMENT; + if (scmd->sc_data_direction == DMA_TO_DEVICE) + sgl_flags |= MPI2_SGE_FLAGS_HOST_TO_IOC; + sgl_flags_last_element = (sgl_flags | MPI2_SGE_FLAGS_LAST_ELEMENT) + << MPI2_SGE_FLAGS_SHIFT; + sgl_flags_end_buffer = (sgl_flags | MPI2_SGE_FLAGS_LAST_ELEMENT | + MPI2_SGE_FLAGS_END_OF_BUFFER | MPI2_SGE_FLAGS_END_OF_LIST) + << MPI2_SGE_FLAGS_SHIFT; + sgl_flags = sgl_flags << MPI2_SGE_FLAGS_SHIFT; + + sg_scmd = scsi_sglist(scmd); + sges_left = scsi_dma_map(scmd); + if (!sges_left) { + sdev_printk(KERN_ERR, scmd->device, "pci_map_sg" + " failed: request for %d bytes!\n", scsi_bufflen(scmd)); + return -ENOMEM; + } + + sg_local = &mpi_request->SGL; + sges_in_segment = ioc->max_sges_in_main_message; + if (sges_left <= sges_in_segment) + goto fill_in_last_segment; + + mpi_request->ChainOffset = (offsetof(Mpi2SCSIIORequest_t, SGL) + + (sges_in_segment * ioc->sge_size))/4; + + /* fill in main message segment when there is a chain following */ + while (sges_in_segment) { + if (sges_in_segment == 1) + ioc->base_add_sg_single(sg_local, + sgl_flags_last_element | sg_dma_len(sg_scmd), + sg_dma_address(sg_scmd)); + else + ioc->base_add_sg_single(sg_local, sgl_flags | + sg_dma_len(sg_scmd), sg_dma_address(sg_scmd)); + sg_scmd = sg_next(sg_scmd); + sg_local += ioc->sge_size; + sges_left--; + sges_in_segment--; + } + + /* initializing the chain flags and pointers */ + chain_flags = MPI2_SGE_FLAGS_CHAIN_ELEMENT << MPI2_SGE_FLAGS_SHIFT; + chain = _scsih_get_chain_buffer(ioc, smid); + chain_dma = _scsih_get_chain_buffer_dma(ioc, smid); + do { + sges_in_segment = (sges_left <= + ioc->max_sges_in_chain_message) ? sges_left : + ioc->max_sges_in_chain_message; + chain_offset = (sges_left == sges_in_segment) ? + 0 : (sges_in_segment * ioc->sge_size)/4; + chain_length = sges_in_segment * ioc->sge_size; + if (chain_offset) { + chain_offset = chain_offset << + MPI2_SGE_CHAIN_OFFSET_SHIFT; + chain_length += ioc->sge_size; + } + ioc->base_add_sg_single(sg_local, chain_flags | chain_offset | + chain_length, chain_dma); + sg_local = chain; + if (!chain_offset) + goto fill_in_last_segment; + + /* fill in chain segments */ + while (sges_in_segment) { + if (sges_in_segment == 1) + ioc->base_add_sg_single(sg_local, + sgl_flags_last_element | + sg_dma_len(sg_scmd), + sg_dma_address(sg_scmd)); + else + ioc->base_add_sg_single(sg_local, sgl_flags | + sg_dma_len(sg_scmd), + sg_dma_address(sg_scmd)); + sg_scmd = sg_next(sg_scmd); + sg_local += ioc->sge_size; + sges_left--; + sges_in_segment--; + } + + chain_dma += ioc->request_sz; + chain += ioc->request_sz; + } while (1); + + + fill_in_last_segment: + + /* fill the last segment */ + while (sges_left) { + if (sges_left == 1) + ioc->base_add_sg_single(sg_local, sgl_flags_end_buffer | + sg_dma_len(sg_scmd), sg_dma_address(sg_scmd)); + else + ioc->base_add_sg_single(sg_local, sgl_flags | + sg_dma_len(sg_scmd), sg_dma_address(sg_scmd)); + sg_scmd = sg_next(sg_scmd); + sg_local += ioc->sge_size; + sges_left--; + } + + return 0; +} + +/** + * scsih_change_queue_depth - setting device queue depth + * @sdev: scsi device struct + * @qdepth: requested queue depth + * + * Returns queue depth. + */ +static int +scsih_change_queue_depth(struct scsi_device *sdev, int qdepth) +{ + struct Scsi_Host *shost = sdev->host; + int max_depth; + int tag_type; + + max_depth = shost->can_queue; + if (!sdev->tagged_supported) + max_depth = 1; + if (qdepth > max_depth) + qdepth = max_depth; + tag_type = (qdepth == 1) ? 0 : MSG_SIMPLE_TAG; + scsi_adjust_queue_depth(sdev, tag_type, qdepth); + + if (sdev->inquiry_len > 7) + sdev_printk(KERN_INFO, sdev, "qdepth(%d), tagged(%d), " + "simple(%d), ordered(%d), scsi_level(%d), cmd_que(%d)\n", + sdev->queue_depth, sdev->tagged_supported, sdev->simple_tags, + sdev->ordered_tags, sdev->scsi_level, + (sdev->inquiry[7] & 2) >> 1); + + return sdev->queue_depth; +} + +/** + * scsih_change_queue_depth - changing device queue tag type + * @sdev: scsi device struct + * @tag_type: requested tag type + * + * Returns queue tag type. + */ +static int +scsih_change_queue_type(struct scsi_device *sdev, int tag_type) +{ + if (sdev->tagged_supported) { + scsi_set_tag_type(sdev, tag_type); + if (tag_type) + scsi_activate_tcq(sdev, sdev->queue_depth); + else + scsi_deactivate_tcq(sdev, sdev->queue_depth); + } else + tag_type = 0; + + return tag_type; +} + +/** + * scsih_target_alloc - target add routine + * @starget: scsi target struct + * + * Returns 0 if ok. Any other return is assumed to be an error and + * the device is ignored. + */ +static int +scsih_target_alloc(struct scsi_target *starget) +{ + struct Scsi_Host *shost = dev_to_shost(&starget->dev); + struct MPT2SAS_ADAPTER *ioc = shost_priv(shost); + struct MPT2SAS_TARGET *sas_target_priv_data; + struct _sas_device *sas_device; + struct _raid_device *raid_device; + unsigned long flags; + struct sas_rphy *rphy; + + sas_target_priv_data = kzalloc(sizeof(struct scsi_target), GFP_KERNEL); + if (!sas_target_priv_data) + return -ENOMEM; + + starget->hostdata = sas_target_priv_data; + sas_target_priv_data->starget = starget; + sas_target_priv_data->handle = MPT2SAS_INVALID_DEVICE_HANDLE; + + /* RAID volumes */ + if (starget->channel == RAID_CHANNEL) { + spin_lock_irqsave(&ioc->raid_device_lock, flags); + raid_device = _scsih_raid_device_find_by_id(ioc, starget->id, + starget->channel); + if (raid_device) { + sas_target_priv_data->handle = raid_device->handle; + sas_target_priv_data->sas_address = raid_device->wwid; + sas_target_priv_data->flags |= MPT_TARGET_FLAGS_VOLUME; + raid_device->starget = starget; + } + spin_unlock_irqrestore(&ioc->raid_device_lock, flags); + return 0; + } + + /* sas/sata devices */ + spin_lock_irqsave(&ioc->sas_device_lock, flags); + rphy = dev_to_rphy(starget->dev.parent); + sas_device = mpt2sas_scsih_sas_device_find_by_sas_address(ioc, + rphy->identify.sas_address); + + if (sas_device) { + sas_target_priv_data->handle = sas_device->handle; + sas_target_priv_data->sas_address = sas_device->sas_address; + sas_device->starget = starget; + sas_device->id = starget->id; + sas_device->channel = starget->channel; + if (sas_device->hidden_raid_component) + sas_target_priv_data->flags |= + MPT_TARGET_FLAGS_RAID_COMPONENT; + } + spin_unlock_irqrestore(&ioc->sas_device_lock, flags); + + return 0; +} + +/** + * scsih_target_destroy - target destroy routine + * @starget: scsi target struct + * + * Returns nothing. + */ +static void +scsih_target_destroy(struct scsi_target *starget) +{ + struct Scsi_Host *shost = dev_to_shost(&starget->dev); + struct MPT2SAS_ADAPTER *ioc = shost_priv(shost); + struct MPT2SAS_TARGET *sas_target_priv_data; + struct _sas_device *sas_device; + struct _raid_device *raid_device; + unsigned long flags; + struct sas_rphy *rphy; + + sas_target_priv_data = starget->hostdata; + if (!sas_target_priv_data) + return; + + if (starget->channel == RAID_CHANNEL) { + spin_lock_irqsave(&ioc->raid_device_lock, flags); + raid_device = _scsih_raid_device_find_by_id(ioc, starget->id, + starget->channel); + if (raid_device) { + raid_device->starget = NULL; + raid_device->sdev = NULL; + } + spin_unlock_irqrestore(&ioc->raid_device_lock, flags); + goto out; + } + + spin_lock_irqsave(&ioc->sas_device_lock, flags); + rphy = dev_to_rphy(starget->dev.parent); + sas_device = mpt2sas_scsih_sas_device_find_by_sas_address(ioc, + rphy->identify.sas_address); + if (sas_device) + sas_device->starget = NULL; + + spin_unlock_irqrestore(&ioc->sas_device_lock, flags); + + out: + kfree(sas_target_priv_data); + starget->hostdata = NULL; +} + +/** + * scsih_slave_alloc - device add routine + * @sdev: scsi device struct + * + * Returns 0 if ok. Any other return is assumed to be an error and + * the device is ignored. + */ +static int +scsih_slave_alloc(struct scsi_device *sdev) +{ + struct Scsi_Host *shost; + struct MPT2SAS_ADAPTER *ioc; + struct MPT2SAS_TARGET *sas_target_priv_data; + struct MPT2SAS_DEVICE *sas_device_priv_data; + struct scsi_target *starget; + struct _raid_device *raid_device; + struct _sas_device *sas_device; + unsigned long flags; + + sas_device_priv_data = kzalloc(sizeof(struct scsi_device), GFP_KERNEL); + if (!sas_device_priv_data) + return -ENOMEM; + + sas_device_priv_data->lun = sdev->lun; + sas_device_priv_data->flags = MPT_DEVICE_FLAGS_INIT; + + starget = scsi_target(sdev); + sas_target_priv_data = starget->hostdata; + sas_target_priv_data->num_luns++; + sas_device_priv_data->sas_target = sas_target_priv_data; + sdev->hostdata = sas_device_priv_data; + if ((sas_target_priv_data->flags & MPT_TARGET_FLAGS_RAID_COMPONENT)) + sdev->no_uld_attach = 1; + + shost = dev_to_shost(&starget->dev); + ioc = shost_priv(shost); + if (starget->channel == RAID_CHANNEL) { + spin_lock_irqsave(&ioc->raid_device_lock, flags); + raid_device = _scsih_raid_device_find_by_id(ioc, + starget->id, starget->channel); + if (raid_device) + raid_device->sdev = sdev; /* raid is single lun */ + spin_unlock_irqrestore(&ioc->raid_device_lock, flags); + } else { + /* set TLR bit for SSP devices */ + if (!(ioc->facts.IOCCapabilities & + MPI2_IOCFACTS_CAPABILITY_TLR)) + goto out; + spin_lock_irqsave(&ioc->sas_device_lock, flags); + sas_device = mpt2sas_scsih_sas_device_find_by_sas_address(ioc, + sas_device_priv_data->sas_target->sas_address); + spin_unlock_irqrestore(&ioc->sas_device_lock, flags); + if (sas_device && sas_device->device_info & + MPI2_SAS_DEVICE_INFO_SSP_TARGET) + sas_device_priv_data->flags |= MPT_DEVICE_TLR_ON; + } + + out: + return 0; +} + +/** + * scsih_slave_destroy - device destroy routine + * @sdev: scsi device struct + * + * Returns nothing. + */ +static void +scsih_slave_destroy(struct scsi_device *sdev) +{ + struct MPT2SAS_TARGET *sas_target_priv_data; + struct scsi_target *starget; + + if (!sdev->hostdata) + return; + + starget = scsi_target(sdev); + sas_target_priv_data = starget->hostdata; + sas_target_priv_data->num_luns--; + kfree(sdev->hostdata); + sdev->hostdata = NULL; +} + +/** + * scsih_display_sata_capabilities - sata capabilities + * @ioc: per adapter object + * @sas_device: the sas_device object + * @sdev: scsi device struct + */ +static void +scsih_display_sata_capabilities(struct MPT2SAS_ADAPTER *ioc, + struct _sas_device *sas_device, struct scsi_device *sdev) +{ + Mpi2ConfigReply_t mpi_reply; + Mpi2SasDevicePage0_t sas_device_pg0; + u32 ioc_status; + u16 flags; + u32 device_info; + + if ((mpt2sas_config_get_sas_device_pg0(ioc, &mpi_reply, &sas_device_pg0, + MPI2_SAS_DEVICE_PGAD_FORM_HANDLE, sas_device->handle))) { + printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", + ioc->name, __FILE__, __LINE__, __func__); + return; + } + + ioc_status = le16_to_cpu(mpi_reply.IOCStatus) & + MPI2_IOCSTATUS_MASK; + if (ioc_status != MPI2_IOCSTATUS_SUCCESS) { + printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", + ioc->name, __FILE__, __LINE__, __func__); + return; + } + + flags = le16_to_cpu(sas_device_pg0.Flags); + device_info = le16_to_cpu(sas_device_pg0.DeviceInfo); + + sdev_printk(KERN_INFO, sdev, + "atapi(%s), ncq(%s), asyn_notify(%s), smart(%s), fua(%s), " + "sw_preserve(%s)\n", + (device_info & MPI2_SAS_DEVICE_INFO_ATAPI_DEVICE) ? "y" : "n", + (flags & MPI2_SAS_DEVICE0_FLAGS_SATA_NCQ_SUPPORTED) ? "y" : "n", + (flags & MPI2_SAS_DEVICE0_FLAGS_SATA_ASYNCHRONOUS_NOTIFY) ? "y" : + "n", + (flags & MPI2_SAS_DEVICE0_FLAGS_SATA_SMART_SUPPORTED) ? "y" : "n", + (flags & MPI2_SAS_DEVICE0_FLAGS_SATA_FUA_SUPPORTED) ? "y" : "n", + (flags & MPI2_SAS_DEVICE0_FLAGS_SATA_SW_PRESERVE) ? "y" : "n"); +} + +/** + * _scsih_get_volume_capabilities - volume capabilities + * @ioc: per adapter object + * @sas_device: the raid_device object + */ +static void +_scsih_get_volume_capabilities(struct MPT2SAS_ADAPTER *ioc, + struct _raid_device *raid_device) +{ + Mpi2RaidVolPage0_t *vol_pg0; + Mpi2RaidPhysDiskPage0_t pd_pg0; + Mpi2SasDevicePage0_t sas_device_pg0; + Mpi2ConfigReply_t mpi_reply; + u16 sz; + u8 num_pds; + + if ((mpt2sas_config_get_number_pds(ioc, raid_device->handle, + &num_pds)) || !num_pds) { + printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", + ioc->name, __FILE__, __LINE__, __func__); + return; + } + + raid_device->num_pds = num_pds; + sz = offsetof(Mpi2RaidVolPage0_t, PhysDisk) + (num_pds * + sizeof(Mpi2RaidVol0PhysDisk_t)); + vol_pg0 = kzalloc(sz, GFP_KERNEL); + if (!vol_pg0) { + printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", + ioc->name, __FILE__, __LINE__, __func__); + return; + } + + if ((mpt2sas_config_get_raid_volume_pg0(ioc, &mpi_reply, vol_pg0, + MPI2_RAID_VOLUME_PGAD_FORM_HANDLE, raid_device->handle, sz))) { + printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", + ioc->name, __FILE__, __LINE__, __func__); + kfree(vol_pg0); + return; + } + + raid_device->volume_type = vol_pg0->VolumeType; + + /* figure out what the underlying devices are by + * obtaining the device_info bits for the 1st device + */ + if (!(mpt2sas_config_get_phys_disk_pg0(ioc, &mpi_reply, + &pd_pg0, MPI2_PHYSDISK_PGAD_FORM_PHYSDISKNUM, + vol_pg0->PhysDisk[0].PhysDiskNum))) { + if (!(mpt2sas_config_get_sas_device_pg0(ioc, &mpi_reply, + &sas_device_pg0, MPI2_SAS_DEVICE_PGAD_FORM_HANDLE, + le16_to_cpu(pd_pg0.DevHandle)))) { + raid_device->device_info = + le32_to_cpu(sas_device_pg0.DeviceInfo); + } + } + + kfree(vol_pg0); +} + +/** + * scsih_slave_configure - device configure routine. + * @sdev: scsi device struct + * + * Returns 0 if ok. Any other return is assumed to be an error and + * the device is ignored. + */ +static int +scsih_slave_configure(struct scsi_device *sdev) +{ + struct Scsi_Host *shost = sdev->host; + struct MPT2SAS_ADAPTER *ioc = shost_priv(shost); + struct MPT2SAS_DEVICE *sas_device_priv_data; + struct MPT2SAS_TARGET *sas_target_priv_data; + struct _sas_device *sas_device; + struct _raid_device *raid_device; + unsigned long flags; + int qdepth; + u8 ssp_target = 0; + char *ds = ""; + char *r_level = ""; + + qdepth = 1; + sas_device_priv_data = sdev->hostdata; + sas_device_priv_data->configured_lun = 1; + sas_device_priv_data->flags &= ~MPT_DEVICE_FLAGS_INIT; + sas_target_priv_data = sas_device_priv_data->sas_target; + + /* raid volume handling */ + if (sas_target_priv_data->flags & MPT_TARGET_FLAGS_VOLUME) { + + spin_lock_irqsave(&ioc->raid_device_lock, flags); + raid_device = _scsih_raid_device_find_by_handle(ioc, + sas_target_priv_data->handle); + spin_unlock_irqrestore(&ioc->raid_device_lock, flags); + if (!raid_device) { + printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", + ioc->name, __FILE__, __LINE__, __func__); + return 0; + } + + _scsih_get_volume_capabilities(ioc, raid_device); + + /* RAID Queue Depth Support + * IS volume = underlying qdepth of drive type, either + * MPT2SAS_SAS_QUEUE_DEPTH or MPT2SAS_SATA_QUEUE_DEPTH + * IM/IME/R10 = 128 (MPT2SAS_RAID_QUEUE_DEPTH) + */ + if (raid_device->device_info & + MPI2_SAS_DEVICE_INFO_SSP_TARGET) { + qdepth = MPT2SAS_SAS_QUEUE_DEPTH; + ds = "SSP"; + } else { + qdepth = MPT2SAS_SATA_QUEUE_DEPTH; + if (raid_device->device_info & + MPI2_SAS_DEVICE_INFO_SATA_DEVICE) + ds = "SATA"; + else + ds = "STP"; + } + + switch (raid_device->volume_type) { + case MPI2_RAID_VOL_TYPE_RAID0: + r_level = "RAID0"; + break; + case MPI2_RAID_VOL_TYPE_RAID1E: + qdepth = MPT2SAS_RAID_QUEUE_DEPTH; + r_level = "RAID1E"; + break; + case MPI2_RAID_VOL_TYPE_RAID1: + qdepth = MPT2SAS_RAID_QUEUE_DEPTH; + r_level = "RAID1"; + break; + case MPI2_RAID_VOL_TYPE_RAID10: + qdepth = MPT2SAS_RAID_QUEUE_DEPTH; + r_level = "RAID10"; + break; + case MPI2_RAID_VOL_TYPE_UNKNOWN: + default: + qdepth = MPT2SAS_RAID_QUEUE_DEPTH; + r_level = "RAIDX"; + break; + } + + sdev_printk(KERN_INFO, sdev, "%s: " + "handle(0x%04x), wwid(0x%016llx), pd_count(%d), type(%s)\n", + r_level, raid_device->handle, + (unsigned long long)raid_device->wwid, + raid_device->num_pds, ds); + scsih_change_queue_depth(sdev, qdepth); + return 0; + } + + /* non-raid handling */ + spin_lock_irqsave(&ioc->sas_device_lock, flags); + sas_device = mpt2sas_scsih_sas_device_find_by_sas_address(ioc, + sas_device_priv_data->sas_target->sas_address); + spin_unlock_irqrestore(&ioc->sas_device_lock, flags); + if (sas_device) { + if (sas_target_priv_data->flags & + MPT_TARGET_FLAGS_RAID_COMPONENT) { + mpt2sas_config_get_volume_handle(ioc, + sas_device->handle, &sas_device->volume_handle); + mpt2sas_config_get_volume_wwid(ioc, + sas_device->volume_handle, + &sas_device->volume_wwid); + } + if (sas_device->device_info & MPI2_SAS_DEVICE_INFO_SSP_TARGET) { + qdepth = MPT2SAS_SAS_QUEUE_DEPTH; + ssp_target = 1; + ds = "SSP"; + } else { + qdepth = MPT2SAS_SATA_QUEUE_DEPTH; + if (sas_device->device_info & + MPI2_SAS_DEVICE_INFO_STP_TARGET) + ds = "STP"; + else if (sas_device->device_info & + MPI2_SAS_DEVICE_INFO_SATA_DEVICE) + ds = "SATA"; + } + + sdev_printk(KERN_INFO, sdev, "%s: handle(0x%04x), " + "sas_addr(0x%016llx), device_name(0x%016llx)\n", + ds, sas_device->handle, + (unsigned long long)sas_device->sas_address, + (unsigned long long)sas_device->device_name); + sdev_printk(KERN_INFO, sdev, "%s: " + "enclosure_logical_id(0x%016llx), slot(%d)\n", ds, + (unsigned long long) sas_device->enclosure_logical_id, + sas_device->slot); + + if (!ssp_target) + scsih_display_sata_capabilities(ioc, sas_device, sdev); + } + + scsih_change_queue_depth(sdev, qdepth); + + if (ssp_target) + sas_read_port_mode_page(sdev); + return 0; +} + +/** + * scsih_bios_param - fetch head, sector, cylinder info for a disk + * @sdev: scsi device struct + * @bdev: pointer to block device context + * @capacity: device size (in 512 byte sectors) + * @params: three element array to place output: + * params[0] number of heads (max 255) + * params[1] number of sectors (max 63) + * params[2] number of cylinders + * + * Return nothing. + */ +static int +scsih_bios_param(struct scsi_device *sdev, struct block_device *bdev, + sector_t capacity, int params[]) +{ + int heads; + int sectors; + sector_t cylinders; + ulong dummy; + + heads = 64; + sectors = 32; + + dummy = heads * sectors; + cylinders = capacity; + sector_div(cylinders, dummy); + + /* + * Handle extended translation size for logical drives + * > 1Gb + */ + if ((ulong)capacity >= 0x200000) { + heads = 255; + sectors = 63; + dummy = heads * sectors; + cylinders = capacity; + sector_div(cylinders, dummy); + } + + /* return result */ + params[0] = heads; + params[1] = sectors; + params[2] = cylinders; + + return 0; +} + +/** + * _scsih_response_code - translation of device response code + * @ioc: per adapter object + * @response_code: response code returned by the device + * + * Return nothing. + */ +static void +_scsih_response_code(struct MPT2SAS_ADAPTER *ioc, u8 response_code) +{ + char *desc; + + switch (response_code) { + case MPI2_SCSITASKMGMT_RSP_TM_COMPLETE: + desc = "task management request completed"; + break; + case MPI2_SCSITASKMGMT_RSP_INVALID_FRAME: + desc = "invalid frame"; + break; + case MPI2_SCSITASKMGMT_RSP_TM_NOT_SUPPORTED: + desc = "task management request not supported"; + break; + case MPI2_SCSITASKMGMT_RSP_TM_FAILED: + desc = "task management request failed"; + break; + case MPI2_SCSITASKMGMT_RSP_TM_SUCCEEDED: + desc = "task management request succeeded"; + break; + case MPI2_SCSITASKMGMT_RSP_TM_INVALID_LUN: + desc = "invalid lun"; + break; + case 0xA: + desc = "overlapped tag attempted"; + break; + case MPI2_SCSITASKMGMT_RSP_IO_QUEUED_ON_IOC: + desc = "task queued, however not sent to target"; + break; + default: + desc = "unknown"; + break; + } + printk(MPT2SAS_WARN_FMT "response_code(0x%01x): %s\n", + ioc->name, response_code, desc); +} + +/** + * scsih_tm_done - tm completion routine + * @ioc: per adapter object + * @smid: system request message index + * @VF_ID: virtual function id + * @reply: reply message frame(lower 32bit addr) + * Context: none. + * + * The callback handler when using scsih_issue_tm. + * + * Return nothing. + */ +static void +scsih_tm_done(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 VF_ID, u32 reply) +{ + MPI2DefaultReply_t *mpi_reply; + + if (ioc->tm_cmds.status == MPT2_CMD_NOT_USED) + return; + if (ioc->tm_cmds.smid != smid) + return; + ioc->tm_cmds.status |= MPT2_CMD_COMPLETE; + mpi_reply = mpt2sas_base_get_reply_virt_addr(ioc, reply); + if (mpi_reply) { + memcpy(ioc->tm_cmds.reply, mpi_reply, mpi_reply->MsgLength*4); + ioc->tm_cmds.status |= MPT2_CMD_REPLY_VALID; + } + ioc->tm_cmds.status &= ~MPT2_CMD_PENDING; + complete(&ioc->tm_cmds.done); +} + +/** + * mpt2sas_scsih_set_tm_flag - set per target tm_busy + * @ioc: per adapter object + * @handle: device handle + * + * During taskmangement request, we need to freeze the device queue. + */ +void +mpt2sas_scsih_set_tm_flag(struct MPT2SAS_ADAPTER *ioc, u16 handle) +{ + struct MPT2SAS_DEVICE *sas_device_priv_data; + struct scsi_device *sdev; + u8 skip = 0; + + shost_for_each_device(sdev, ioc->shost) { + if (skip) + continue; + sas_device_priv_data = sdev->hostdata; + if (!sas_device_priv_data) + continue; + if (sas_device_priv_data->sas_target->handle == handle) { + sas_device_priv_data->sas_target->tm_busy = 1; + skip = 1; + ioc->ignore_loginfos = 1; + } + } +} + +/** + * mpt2sas_scsih_clear_tm_flag - clear per target tm_busy + * @ioc: per adapter object + * @handle: device handle + * + * During taskmangement request, we need to freeze the device queue. + */ +void +mpt2sas_scsih_clear_tm_flag(struct MPT2SAS_ADAPTER *ioc, u16 handle) +{ + struct MPT2SAS_DEVICE *sas_device_priv_data; + struct scsi_device *sdev; + u8 skip = 0; + + shost_for_each_device(sdev, ioc->shost) { + if (skip) + continue; + sas_device_priv_data = sdev->hostdata; + if (!sas_device_priv_data) + continue; + if (sas_device_priv_data->sas_target->handle == handle) { + sas_device_priv_data->sas_target->tm_busy = 0; + skip = 1; + ioc->ignore_loginfos = 0; + } + } +} + +/** + * mpt2sas_scsih_issue_tm - main routine for sending tm requests + * @ioc: per adapter struct + * @device_handle: device handle + * @lun: lun number + * @type: MPI2_SCSITASKMGMT_TASKTYPE__XXX (defined in mpi2_init.h) + * @smid_task: smid assigned to the task + * @timeout: timeout in seconds + * Context: The calling function needs to acquire the tm_cmds.mutex + * + * A generic API for sending task management requests to firmware. + * + * The ioc->tm_cmds.status flag should be MPT2_CMD_NOT_USED before calling + * this API. + * + * The callback index is set inside `ioc->tm_cb_idx`. + * + * Return nothing. + */ +void +mpt2sas_scsih_issue_tm(struct MPT2SAS_ADAPTER *ioc, u16 handle, uint lun, + u8 type, u16 smid_task, ulong timeout) +{ + Mpi2SCSITaskManagementRequest_t *mpi_request; + Mpi2SCSITaskManagementReply_t *mpi_reply; + u16 smid = 0; + u32 ioc_state; + unsigned long timeleft; + u8 VF_ID = 0; + unsigned long flags; + + spin_lock_irqsave(&ioc->ioc_reset_in_progress_lock, flags); + if (ioc->tm_cmds.status != MPT2_CMD_NOT_USED || + ioc->shost_recovery) { + spin_unlock_irqrestore(&ioc->ioc_reset_in_progress_lock, flags); + printk(MPT2SAS_INFO_FMT "%s: host reset in progress!\n", + __func__, ioc->name); + return; + } + spin_unlock_irqrestore(&ioc->ioc_reset_in_progress_lock, flags); + + ioc_state = mpt2sas_base_get_iocstate(ioc, 0); + if (ioc_state & MPI2_DOORBELL_USED) { + dhsprintk(ioc, printk(MPT2SAS_DEBUG_FMT "unexpected doorbell " + "active!\n", ioc->name)); + goto issue_host_reset; + } + + if ((ioc_state & MPI2_IOC_STATE_MASK) == MPI2_IOC_STATE_FAULT) { + mpt2sas_base_fault_info(ioc, ioc_state & + MPI2_DOORBELL_DATA_MASK); + goto issue_host_reset; + } + + smid = mpt2sas_base_get_smid(ioc, ioc->tm_cb_idx); + if (!smid) { + printk(MPT2SAS_ERR_FMT "%s: failed obtaining a smid\n", + ioc->name, __func__); + return; + } + + dtmprintk(ioc, printk(MPT2SAS_INFO_FMT "sending tm: handle(0x%04x)," + " task_type(0x%02x), smid(%d)\n", ioc->name, handle, type, smid)); + ioc->tm_cmds.status = MPT2_CMD_PENDING; + mpi_request = mpt2sas_base_get_msg_frame(ioc, smid); + ioc->tm_cmds.smid = smid; + memset(mpi_request, 0, sizeof(Mpi2SCSITaskManagementRequest_t)); + mpi_request->Function = MPI2_FUNCTION_SCSI_TASK_MGMT; + mpi_request->DevHandle = cpu_to_le16(handle); + mpi_request->TaskType = type; + mpi_request->TaskMID = cpu_to_le16(smid_task); + int_to_scsilun(lun, (struct scsi_lun *)mpi_request->LUN); + mpt2sas_scsih_set_tm_flag(ioc, handle); + mpt2sas_base_put_smid_hi_priority(ioc, smid, VF_ID); + timeleft = wait_for_completion_timeout(&ioc->tm_cmds.done, timeout*HZ); + mpt2sas_scsih_clear_tm_flag(ioc, handle); + if (!(ioc->tm_cmds.status & MPT2_CMD_COMPLETE)) { + printk(MPT2SAS_ERR_FMT "%s: timeout\n", + ioc->name, __func__); + _debug_dump_mf(mpi_request, + sizeof(Mpi2SCSITaskManagementRequest_t)/4); + if (!(ioc->tm_cmds.status & MPT2_CMD_RESET)) + goto issue_host_reset; + } + + if (ioc->tm_cmds.status & MPT2_CMD_REPLY_VALID) { + mpi_reply = ioc->tm_cmds.reply; + dtmprintk(ioc, printk(MPT2SAS_INFO_FMT "complete tm: " + "ioc_status(0x%04x), loginfo(0x%08x), term_count(0x%08x)\n", + ioc->name, le16_to_cpu(mpi_reply->IOCStatus), + le32_to_cpu(mpi_reply->IOCLogInfo), + le32_to_cpu(mpi_reply->TerminationCount))); + if (ioc->logging_level & MPT_DEBUG_TM) + _scsih_response_code(ioc, mpi_reply->ResponseCode); + } + return; + issue_host_reset: + mpt2sas_base_hard_reset_handler(ioc, CAN_SLEEP, FORCE_BIG_HAMMER); +} + +/** + * scsih_abort - eh threads main abort routine + * @sdev: scsi device struct + * + * Returns SUCCESS if command aborted else FAILED + */ +static int +scsih_abort(struct scsi_cmnd *scmd) +{ + struct MPT2SAS_ADAPTER *ioc = shost_priv(scmd->device->host); + struct MPT2SAS_DEVICE *sas_device_priv_data; + u16 smid; + u16 handle; + int r; + struct scsi_cmnd *scmd_lookup; + + printk(MPT2SAS_INFO_FMT "attempting task abort! scmd(%p)\n", + ioc->name, scmd); + scsi_print_command(scmd); + + sas_device_priv_data = scmd->device->hostdata; + if (!sas_device_priv_data || !sas_device_priv_data->sas_target) { + printk(MPT2SAS_INFO_FMT "device been deleted! scmd(%p)\n", + ioc->name, scmd); + scmd->result = DID_NO_CONNECT << 16; + scmd->scsi_done(scmd); + r = SUCCESS; + goto out; + } + + /* search for the command */ + smid = _scsih_scsi_lookup_find_by_scmd(ioc, scmd); + if (!smid) { + scmd->result = DID_RESET << 16; + r = SUCCESS; + goto out; + } + + /* for hidden raid components and volumes this is not supported */ + if (sas_device_priv_data->sas_target->flags & + MPT_TARGET_FLAGS_RAID_COMPONENT || + sas_device_priv_data->sas_target->flags & MPT_TARGET_FLAGS_VOLUME) { + scmd->result = DID_RESET << 16; + r = FAILED; + goto out; + } + + mutex_lock(&ioc->tm_cmds.mutex); + handle = sas_device_priv_data->sas_target->handle; + mpt2sas_scsih_issue_tm(ioc, handle, sas_device_priv_data->lun, + MPI2_SCSITASKMGMT_TASKTYPE_ABORT_TASK, smid, 30); + + /* sanity check - see whether command actually completed */ + scmd_lookup = _scsih_scsi_lookup_get(ioc, smid); + if (scmd_lookup && (scmd_lookup->serial_number == scmd->serial_number)) + r = FAILED; + else + r = SUCCESS; + ioc->tm_cmds.status = MPT2_CMD_NOT_USED; + mutex_unlock(&ioc->tm_cmds.mutex); + + out: + printk(MPT2SAS_INFO_FMT "task abort: %s scmd(%p)\n", + ioc->name, ((r == SUCCESS) ? "SUCCESS" : "FAILED"), scmd); + return r; +} + + +/** + * scsih_dev_reset - eh threads main device reset routine + * @sdev: scsi device struct + * + * Returns SUCCESS if command aborted else FAILED + */ +static int +scsih_dev_reset(struct scsi_cmnd *scmd) +{ + struct MPT2SAS_ADAPTER *ioc = shost_priv(scmd->device->host); + struct MPT2SAS_DEVICE *sas_device_priv_data; + struct _sas_device *sas_device; + unsigned long flags; + u16 handle; + int r; + + printk(MPT2SAS_INFO_FMT "attempting target reset! scmd(%p)\n", + ioc->name, scmd); + scsi_print_command(scmd); + + sas_device_priv_data = scmd->device->hostdata; + if (!sas_device_priv_data || !sas_device_priv_data->sas_target) { + printk(MPT2SAS_INFO_FMT "device been deleted! scmd(%p)\n", + ioc->name, scmd); + scmd->result = DID_NO_CONNECT << 16; + scmd->scsi_done(scmd); + r = SUCCESS; + goto out; + } + + /* for hidden raid components obtain the volume_handle */ + handle = 0; + if (sas_device_priv_data->sas_target->flags & + MPT_TARGET_FLAGS_RAID_COMPONENT) { + spin_lock_irqsave(&ioc->sas_device_lock, flags); + sas_device = _scsih_sas_device_find_by_handle(ioc, + sas_device_priv_data->sas_target->handle); + if (sas_device) + handle = sas_device->volume_handle; + spin_unlock_irqrestore(&ioc->sas_device_lock, flags); + } else + handle = sas_device_priv_data->sas_target->handle; + + if (!handle) { + scmd->result = DID_RESET << 16; + r = FAILED; + goto out; + } + + mutex_lock(&ioc->tm_cmds.mutex); + mpt2sas_scsih_issue_tm(ioc, handle, 0, + MPI2_SCSITASKMGMT_TASKTYPE_TARGET_RESET, 0, 30); + + /* + * sanity check see whether all commands to this target been + * completed + */ + if (_scsih_scsi_lookup_find_by_target(ioc, scmd->device->id, + scmd->device->channel)) + r = FAILED; + else + r = SUCCESS; + ioc->tm_cmds.status = MPT2_CMD_NOT_USED; + mutex_unlock(&ioc->tm_cmds.mutex); + + out: + printk(MPT2SAS_INFO_FMT "target reset: %s scmd(%p)\n", + ioc->name, ((r == SUCCESS) ? "SUCCESS" : "FAILED"), scmd); + return r; +} + +/** + * scsih_abort - eh threads main host reset routine + * @sdev: scsi device struct + * + * Returns SUCCESS if command aborted else FAILED + */ +static int +scsih_host_reset(struct scsi_cmnd *scmd) +{ + struct MPT2SAS_ADAPTER *ioc = shost_priv(scmd->device->host); + int r, retval; + + printk(MPT2SAS_INFO_FMT "attempting host reset! scmd(%p)\n", + ioc->name, scmd); + scsi_print_command(scmd); + + retval = mpt2sas_base_hard_reset_handler(ioc, CAN_SLEEP, + FORCE_BIG_HAMMER); + r = (retval < 0) ? FAILED : SUCCESS; + printk(MPT2SAS_INFO_FMT "host reset: %s scmd(%p)\n", + ioc->name, ((r == SUCCESS) ? "SUCCESS" : "FAILED"), scmd); + + return r; +} + +/** + * _scsih_fw_event_add - insert and queue up fw_event + * @ioc: per adapter object + * @fw_event: object describing the event + * Context: This function will acquire ioc->fw_event_lock. + * + * This adds the firmware event object into link list, then queues it up to + * be processed from user context. + * + * Return nothing. + */ +static void +_scsih_fw_event_add(struct MPT2SAS_ADAPTER *ioc, struct fw_event_work *fw_event) +{ + unsigned long flags; + + if (ioc->firmware_event_thread == NULL) + return; + + spin_lock_irqsave(&ioc->fw_event_lock, flags); + list_add_tail(&fw_event->list, &ioc->fw_event_list); + INIT_DELAYED_WORK(&fw_event->work, _firmware_event_work); + queue_delayed_work(ioc->firmware_event_thread, &fw_event->work, 1); + spin_unlock_irqrestore(&ioc->fw_event_lock, flags); +} + +/** + * _scsih_fw_event_free - delete fw_event + * @ioc: per adapter object + * @fw_event: object describing the event + * Context: This function will acquire ioc->fw_event_lock. + * + * This removes firmware event object from link list, frees associated memory. + * + * Return nothing. + */ +static void +_scsih_fw_event_free(struct MPT2SAS_ADAPTER *ioc, struct fw_event_work + *fw_event) +{ + unsigned long flags; + + spin_lock_irqsave(&ioc->fw_event_lock, flags); + list_del(&fw_event->list); + kfree(fw_event->event_data); + kfree(fw_event); + spin_unlock_irqrestore(&ioc->fw_event_lock, flags); +} + +/** + * _scsih_fw_event_add - requeue an event + * @ioc: per adapter object + * @fw_event: object describing the event + * Context: This function will acquire ioc->fw_event_lock. + * + * Return nothing. + */ +static void +_scsih_fw_event_requeue(struct MPT2SAS_ADAPTER *ioc, struct fw_event_work + *fw_event, unsigned long delay) +{ + unsigned long flags; + if (ioc->firmware_event_thread == NULL) + return; + + spin_lock_irqsave(&ioc->fw_event_lock, flags); + queue_delayed_work(ioc->firmware_event_thread, &fw_event->work, delay); + spin_unlock_irqrestore(&ioc->fw_event_lock, flags); +} + +/** + * _scsih_fw_event_off - turn flag off preventing event handling + * @ioc: per adapter object + * + * Used to prevent handling of firmware events during adapter reset + * driver unload. + * + * Return nothing. + */ +static void +_scsih_fw_event_off(struct MPT2SAS_ADAPTER *ioc) +{ + unsigned long flags; + + spin_lock_irqsave(&ioc->fw_event_lock, flags); + ioc->fw_events_off = 1; + spin_unlock_irqrestore(&ioc->fw_event_lock, flags); + +} + +/** + * _scsih_fw_event_on - turn flag on allowing firmware event handling + * @ioc: per adapter object + * + * Returns nothing. + */ +static void +_scsih_fw_event_on(struct MPT2SAS_ADAPTER *ioc) +{ + unsigned long flags; + + spin_lock_irqsave(&ioc->fw_event_lock, flags); + ioc->fw_events_off = 0; + spin_unlock_irqrestore(&ioc->fw_event_lock, flags); +} + +/** + * _scsih_ublock_io_device - set the device state to SDEV_RUNNING + * @ioc: per adapter object + * @handle: device handle + * + * During device pull we need to appropiately set the sdev state. + */ +static void +_scsih_ublock_io_device(struct MPT2SAS_ADAPTER *ioc, u16 handle) +{ + struct MPT2SAS_DEVICE *sas_device_priv_data; + struct scsi_device *sdev; + + shost_for_each_device(sdev, ioc->shost) { + sas_device_priv_data = sdev->hostdata; + if (!sas_device_priv_data) + continue; + if (!sas_device_priv_data->block) + continue; + if (sas_device_priv_data->sas_target->handle == handle) { + dewtprintk(ioc, sdev_printk(KERN_INFO, sdev, + MPT2SAS_INFO_FMT "SDEV_RUNNING: " + "handle(0x%04x)\n", ioc->name, handle)); + sas_device_priv_data->block = 0; + scsi_device_set_state(sdev, SDEV_RUNNING); + } + } +} + +/** + * _scsih_block_io_device - set the device state to SDEV_BLOCK + * @ioc: per adapter object + * @handle: device handle + * + * During device pull we need to appropiately set the sdev state. + */ +static void +_scsih_block_io_device(struct MPT2SAS_ADAPTER *ioc, u16 handle) +{ + struct MPT2SAS_DEVICE *sas_device_priv_data; + struct scsi_device *sdev; + + shost_for_each_device(sdev, ioc->shost) { + sas_device_priv_data = sdev->hostdata; + if (!sas_device_priv_data) + continue; + if (sas_device_priv_data->block) + continue; + if (sas_device_priv_data->sas_target->handle == handle) { + dewtprintk(ioc, sdev_printk(KERN_INFO, sdev, + MPT2SAS_INFO_FMT "SDEV_BLOCK: " + "handle(0x%04x)\n", ioc->name, handle)); + sas_device_priv_data->block = 1; + scsi_device_set_state(sdev, SDEV_BLOCK); + } + } +} + +/** + * _scsih_block_io_to_children_attached_to_ex + * @ioc: per adapter object + * @sas_expander: the sas_device object + * + * This routine set sdev state to SDEV_BLOCK for all devices + * attached to this expander. This function called when expander is + * pulled. + */ +static void +_scsih_block_io_to_children_attached_to_ex(struct MPT2SAS_ADAPTER *ioc, + struct _sas_node *sas_expander) +{ + struct _sas_port *mpt2sas_port; + struct _sas_device *sas_device; + struct _sas_node *expander_sibling; + unsigned long flags; + + if (!sas_expander) + return; + + list_for_each_entry(mpt2sas_port, + &sas_expander->sas_port_list, port_list) { + if (mpt2sas_port->remote_identify.device_type == + SAS_END_DEVICE) { + spin_lock_irqsave(&ioc->sas_device_lock, flags); + sas_device = + mpt2sas_scsih_sas_device_find_by_sas_address(ioc, + mpt2sas_port->remote_identify.sas_address); + spin_unlock_irqrestore(&ioc->sas_device_lock, flags); + if (!sas_device) + continue; + _scsih_block_io_device(ioc, sas_device->handle); + } + } + + list_for_each_entry(mpt2sas_port, + &sas_expander->sas_port_list, port_list) { + + if (mpt2sas_port->remote_identify.device_type == + MPI2_SAS_DEVICE_INFO_EDGE_EXPANDER || + mpt2sas_port->remote_identify.device_type == + MPI2_SAS_DEVICE_INFO_FANOUT_EXPANDER) { + + spin_lock_irqsave(&ioc->sas_node_lock, flags); + expander_sibling = + mpt2sas_scsih_expander_find_by_sas_address( + ioc, mpt2sas_port->remote_identify.sas_address); + spin_unlock_irqrestore(&ioc->sas_node_lock, flags); + _scsih_block_io_to_children_attached_to_ex(ioc, + expander_sibling); + } + } +} + +/** + * _scsih_block_io_to_children_attached_directly + * @ioc: per adapter object + * @event_data: topology change event data + * + * This routine set sdev state to SDEV_BLOCK for all devices + * direct attached during device pull. + */ +static void +_scsih_block_io_to_children_attached_directly(struct MPT2SAS_ADAPTER *ioc, + Mpi2EventDataSasTopologyChangeList_t *event_data) +{ + int i; + u16 handle; + u16 reason_code; + u8 phy_number; + + for (i = 0; i < event_data->NumEntries; i++) { + handle = le16_to_cpu(event_data->PHY[i].AttachedDevHandle); + if (!handle) + continue; + phy_number = event_data->StartPhyNum + i; + reason_code = event_data->PHY[i].PhyStatus & + MPI2_EVENT_SAS_TOPO_RC_MASK; + if (reason_code == MPI2_EVENT_SAS_TOPO_RC_DELAY_NOT_RESPONDING) + _scsih_block_io_device(ioc, handle); + } +} + +/** + * _scsih_check_topo_delete_events - sanity check on topo events + * @ioc: per adapter object + * @event_data: the event data payload + * + * This routine added to better handle cable breaker. + * + * This handles the case where driver recieves multiple expander + * add and delete events in a single shot. When there is a delete event + * the routine will void any pending add events waiting in the event queue. + * + * Return nothing. + */ +static void +_scsih_check_topo_delete_events(struct MPT2SAS_ADAPTER *ioc, + Mpi2EventDataSasTopologyChangeList_t *event_data) +{ + struct fw_event_work *fw_event; + Mpi2EventDataSasTopologyChangeList_t *local_event_data; + u16 expander_handle; + struct _sas_node *sas_expander; + unsigned long flags; + + expander_handle = le16_to_cpu(event_data->ExpanderDevHandle); + if (expander_handle < ioc->sas_hba.num_phys) { + _scsih_block_io_to_children_attached_directly(ioc, event_data); + return; + } + + if (event_data->ExpStatus == MPI2_EVENT_SAS_TOPO_ES_DELAY_NOT_RESPONDING + || event_data->ExpStatus == MPI2_EVENT_SAS_TOPO_ES_NOT_RESPONDING) { + spin_lock_irqsave(&ioc->sas_node_lock, flags); + sas_expander = mpt2sas_scsih_expander_find_by_handle(ioc, + expander_handle); + spin_unlock_irqrestore(&ioc->sas_node_lock, flags); + _scsih_block_io_to_children_attached_to_ex(ioc, sas_expander); + } else if (event_data->ExpStatus == MPI2_EVENT_SAS_TOPO_ES_RESPONDING) + _scsih_block_io_to_children_attached_directly(ioc, event_data); + + if (event_data->ExpStatus != MPI2_EVENT_SAS_TOPO_ES_NOT_RESPONDING) + return; + + /* mark ignore flag for pending events */ + spin_lock_irqsave(&ioc->fw_event_lock, flags); + list_for_each_entry(fw_event, &ioc->fw_event_list, list) { + if (fw_event->event != MPI2_EVENT_SAS_TOPOLOGY_CHANGE_LIST || + fw_event->ignore) + continue; + local_event_data = fw_event->event_data; + if (local_event_data->ExpStatus == + MPI2_EVENT_SAS_TOPO_ES_ADDED || + local_event_data->ExpStatus == + MPI2_EVENT_SAS_TOPO_ES_RESPONDING) { + if (le16_to_cpu(local_event_data->ExpanderDevHandle) == + expander_handle) { + dewtprintk(ioc, printk(MPT2SAS_DEBUG_FMT + "setting ignoring flag\n", ioc->name)); + fw_event->ignore = 1; + } + } + } + spin_unlock_irqrestore(&ioc->fw_event_lock, flags); +} + +/** + * _scsih_queue_rescan - queue a topology rescan from user context + * @ioc: per adapter object + * + * Return nothing. + */ +static void +_scsih_queue_rescan(struct MPT2SAS_ADAPTER *ioc) +{ + struct fw_event_work *fw_event; + + if (ioc->wait_for_port_enable_to_complete) + return; + fw_event = kzalloc(sizeof(struct fw_event_work), GFP_ATOMIC); + if (!fw_event) + return; + fw_event->event = MPT2SAS_RESCAN_AFTER_HOST_RESET; + fw_event->ioc = ioc; + _scsih_fw_event_add(ioc, fw_event); +} + +/** + * _scsih_flush_running_cmds - completing outstanding commands. + * @ioc: per adapter object + * + * The flushing out of all pending scmd commands following host reset, + * where all IO is dropped to the floor. + * + * Return nothing. + */ +static void +_scsih_flush_running_cmds(struct MPT2SAS_ADAPTER *ioc) +{ + struct scsi_cmnd *scmd; + u16 smid; + u16 count = 0; + + for (smid = 1; smid <= ioc->request_depth; smid++) { + scmd = _scsih_scsi_lookup_getclear(ioc, smid); + if (!scmd) + continue; + count++; + mpt2sas_base_free_smid(ioc, smid); + scsi_dma_unmap(scmd); + scmd->result = DID_RESET << 16; + scmd->scsi_done(scmd); + } + dtmprintk(ioc, printk(MPT2SAS_INFO_FMT "completing %d cmds\n", + ioc->name, count)); +} + +/** + * mpt2sas_scsih_reset_handler - reset callback handler (for scsih) + * @ioc: per adapter object + * @reset_phase: phase + * + * The handler for doing any required cleanup or initialization. + * + * The reset phase can be MPT2_IOC_PRE_RESET, MPT2_IOC_AFTER_RESET, + * MPT2_IOC_DONE_RESET + * + * Return nothing. + */ +void +mpt2sas_scsih_reset_handler(struct MPT2SAS_ADAPTER *ioc, int reset_phase) +{ + switch (reset_phase) { + case MPT2_IOC_PRE_RESET: + dtmprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s: " + "MPT2_IOC_PRE_RESET\n", ioc->name, __func__)); + _scsih_fw_event_off(ioc); + break; + case MPT2_IOC_AFTER_RESET: + dtmprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s: " + "MPT2_IOC_AFTER_RESET\n", ioc->name, __func__)); + if (ioc->tm_cmds.status & MPT2_CMD_PENDING) { + ioc->tm_cmds.status |= MPT2_CMD_RESET; + mpt2sas_base_free_smid(ioc, ioc->tm_cmds.smid); + complete(&ioc->tm_cmds.done); + } + _scsih_fw_event_on(ioc); + _scsih_flush_running_cmds(ioc); + break; + case MPT2_IOC_DONE_RESET: + dtmprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s: " + "MPT2_IOC_DONE_RESET\n", ioc->name, __func__)); + _scsih_queue_rescan(ioc); + break; + } +} + +/** + * scsih_qcmd - main scsi request entry point + * @scmd: pointer to scsi command object + * @done: function pointer to be invoked on completion + * + * The callback index is set inside `ioc->scsi_io_cb_idx`. + * + * Returns 0 on success. If there's a failure, return either: + * SCSI_MLQUEUE_DEVICE_BUSY if the device queue is full, or + * SCSI_MLQUEUE_HOST_BUSY if the entire host queue is full + */ +static int +scsih_qcmd(struct scsi_cmnd *scmd, void (*done)(struct scsi_cmnd *)) +{ + struct MPT2SAS_ADAPTER *ioc = shost_priv(scmd->device->host); + struct MPT2SAS_DEVICE *sas_device_priv_data; + struct MPT2SAS_TARGET *sas_target_priv_data; + Mpi2SCSIIORequest_t *mpi_request; + u32 mpi_control; + u16 smid; + unsigned long flags; + + scmd->scsi_done = done; + sas_device_priv_data = scmd->device->hostdata; + if (!sas_device_priv_data) { + scmd->result = DID_NO_CONNECT << 16; + scmd->scsi_done(scmd); + return 0; + } + + sas_target_priv_data = sas_device_priv_data->sas_target; + if (!sas_target_priv_data || sas_target_priv_data->handle == + MPT2SAS_INVALID_DEVICE_HANDLE || sas_target_priv_data->deleted) { + scmd->result = DID_NO_CONNECT << 16; + scmd->scsi_done(scmd); + return 0; + } + + /* see if we are busy with task managment stuff */ + spin_lock_irqsave(&ioc->ioc_reset_in_progress_lock, flags); + if (sas_target_priv_data->tm_busy || + ioc->shost_recovery || ioc->ioc_link_reset_in_progress) { + spin_unlock_irqrestore(&ioc->ioc_reset_in_progress_lock, flags); + return SCSI_MLQUEUE_HOST_BUSY; + } + spin_unlock_irqrestore(&ioc->ioc_reset_in_progress_lock, flags); + + if (scmd->sc_data_direction == DMA_FROM_DEVICE) + mpi_control = MPI2_SCSIIO_CONTROL_READ; + else if (scmd->sc_data_direction == DMA_TO_DEVICE) + mpi_control = MPI2_SCSIIO_CONTROL_WRITE; + else + mpi_control = MPI2_SCSIIO_CONTROL_NODATATRANSFER; + + /* set tags */ + if (!(sas_device_priv_data->flags & MPT_DEVICE_FLAGS_INIT)) { + if (scmd->device->tagged_supported) { + if (scmd->device->ordered_tags) + mpi_control |= MPI2_SCSIIO_CONTROL_ORDEREDQ; + else + mpi_control |= MPI2_SCSIIO_CONTROL_SIMPLEQ; + } else +/* MPI Revision I (UNIT = 0xA) - removed MPI2_SCSIIO_CONTROL_UNTAGGED */ +/* mpi_control |= MPI2_SCSIIO_CONTROL_UNTAGGED; + */ + mpi_control |= (0x500); + + } else + mpi_control |= MPI2_SCSIIO_CONTROL_SIMPLEQ; + + if ((sas_device_priv_data->flags & MPT_DEVICE_TLR_ON)) + mpi_control |= MPI2_SCSIIO_CONTROL_TLR_ON; + + smid = mpt2sas_base_get_smid(ioc, ioc->scsi_io_cb_idx); + if (!smid) { + printk(MPT2SAS_ERR_FMT "%s: failed obtaining a smid\n", + ioc->name, __func__); + goto out; + } + mpi_request = mpt2sas_base_get_msg_frame(ioc, smid); + memset(mpi_request, 0, sizeof(Mpi2SCSIIORequest_t)); + mpi_request->Function = MPI2_FUNCTION_SCSI_IO_REQUEST; + if (sas_device_priv_data->sas_target->flags & + MPT_TARGET_FLAGS_RAID_COMPONENT) + mpi_request->Function = MPI2_FUNCTION_RAID_SCSI_IO_PASSTHROUGH; + else + mpi_request->Function = MPI2_FUNCTION_SCSI_IO_REQUEST; + mpi_request->DevHandle = + cpu_to_le16(sas_device_priv_data->sas_target->handle); + mpi_request->DataLength = cpu_to_le32(scsi_bufflen(scmd)); + mpi_request->Control = cpu_to_le32(mpi_control); + mpi_request->IoFlags = cpu_to_le16(scmd->cmd_len); + mpi_request->MsgFlags = MPI2_SCSIIO_MSGFLAGS_SYSTEM_SENSE_ADDR; + mpi_request->SenseBufferLength = SCSI_SENSE_BUFFERSIZE; + mpi_request->SenseBufferLowAddress = + (u32)mpt2sas_base_get_sense_buffer_dma(ioc, smid); + mpi_request->SGLOffset0 = offsetof(Mpi2SCSIIORequest_t, SGL) / 4; + mpi_request->SGLFlags = cpu_to_le16(MPI2_SCSIIO_SGLFLAGS_TYPE_MPI + + MPI2_SCSIIO_SGLFLAGS_SYSTEM_ADDR); + + int_to_scsilun(sas_device_priv_data->lun, (struct scsi_lun *) + mpi_request->LUN); + memcpy(mpi_request->CDB.CDB32, scmd->cmnd, scmd->cmd_len); + + if (!mpi_request->DataLength) { + mpt2sas_base_build_zero_len_sge(ioc, &mpi_request->SGL); + } else { + if (_scsih_build_scatter_gather(ioc, scmd, smid)) { + mpt2sas_base_free_smid(ioc, smid); + goto out; + } + } + + _scsih_scsi_lookup_set(ioc, smid, scmd); + mpt2sas_base_put_smid_scsi_io(ioc, smid, 0, + sas_device_priv_data->sas_target->handle); + return 0; + + out: + return SCSI_MLQUEUE_HOST_BUSY; +} + +/** + * _scsih_normalize_sense - normalize descriptor and fixed format sense data + * @sense_buffer: sense data returned by target + * @data: normalized skey/asc/ascq + * + * Return nothing. + */ +static void +_scsih_normalize_sense(char *sense_buffer, struct sense_info *data) +{ + if ((sense_buffer[0] & 0x7F) >= 0x72) { + /* descriptor format */ + data->skey = sense_buffer[1] & 0x0F; + data->asc = sense_buffer[2]; + data->ascq = sense_buffer[3]; + } else { + /* fixed format */ + data->skey = sense_buffer[2] & 0x0F; + data->asc = sense_buffer[12]; + data->ascq = sense_buffer[13]; + } +} + +#ifdef CONFIG_SCSI_MPT2SAS_LOGGING +/** + * _scsih_scsi_ioc_info - translated non-succesfull SCSI_IO request + * @ioc: per adapter object + * @scmd: pointer to scsi command object + * @mpi_reply: reply mf payload returned from firmware + * + * scsi_status - SCSI Status code returned from target device + * scsi_state - state info associated with SCSI_IO determined by ioc + * ioc_status - ioc supplied status info + * + * Return nothing. + */ +static void +_scsih_scsi_ioc_info(struct MPT2SAS_ADAPTER *ioc, struct scsi_cmnd *scmd, + Mpi2SCSIIOReply_t *mpi_reply, u16 smid) +{ + u32 response_info; + u8 *response_bytes; + u16 ioc_status = le16_to_cpu(mpi_reply->IOCStatus) & + MPI2_IOCSTATUS_MASK; + u8 scsi_state = mpi_reply->SCSIState; + u8 scsi_status = mpi_reply->SCSIStatus; + char *desc_ioc_state = NULL; + char *desc_scsi_status = NULL; + char *desc_scsi_state = ioc->tmp_string; + + switch (ioc_status) { + case MPI2_IOCSTATUS_SUCCESS: + desc_ioc_state = "success"; + break; + case MPI2_IOCSTATUS_INVALID_FUNCTION: + desc_ioc_state = "invalid function"; + break; + case MPI2_IOCSTATUS_SCSI_RECOVERED_ERROR: + desc_ioc_state = "scsi recovered error"; + break; + case MPI2_IOCSTATUS_SCSI_INVALID_DEVHANDLE: + desc_ioc_state = "scsi invalid dev handle"; + break; + case MPI2_IOCSTATUS_SCSI_DEVICE_NOT_THERE: + desc_ioc_state = "scsi device not there"; + break; + case MPI2_IOCSTATUS_SCSI_DATA_OVERRUN: + desc_ioc_state = "scsi data overrun"; + break; + case MPI2_IOCSTATUS_SCSI_DATA_UNDERRUN: + desc_ioc_state = "scsi data underrun"; + break; + case MPI2_IOCSTATUS_SCSI_IO_DATA_ERROR: + desc_ioc_state = "scsi io data error"; + break; + case MPI2_IOCSTATUS_SCSI_PROTOCOL_ERROR: + desc_ioc_state = "scsi protocol error"; + break; + case MPI2_IOCSTATUS_SCSI_TASK_TERMINATED: + desc_ioc_state = "scsi task terminated"; + break; + case MPI2_IOCSTATUS_SCSI_RESIDUAL_MISMATCH: + desc_ioc_state = "scsi residual mismatch"; + break; + case MPI2_IOCSTATUS_SCSI_TASK_MGMT_FAILED: + desc_ioc_state = "scsi task mgmt failed"; + break; + case MPI2_IOCSTATUS_SCSI_IOC_TERMINATED: + desc_ioc_state = "scsi ioc terminated"; + break; + case MPI2_IOCSTATUS_SCSI_EXT_TERMINATED: + desc_ioc_state = "scsi ext terminated"; + break; + default: + desc_ioc_state = "unknown"; + break; + } + + switch (scsi_status) { + case MPI2_SCSI_STATUS_GOOD: + desc_scsi_status = "good"; + break; + case MPI2_SCSI_STATUS_CHECK_CONDITION: + desc_scsi_status = "check condition"; + break; + case MPI2_SCSI_STATUS_CONDITION_MET: + desc_scsi_status = "condition met"; + break; + case MPI2_SCSI_STATUS_BUSY: + desc_scsi_status = "busy"; + break; + case MPI2_SCSI_STATUS_INTERMEDIATE: + desc_scsi_status = "intermediate"; + break; + case MPI2_SCSI_STATUS_INTERMEDIATE_CONDMET: + desc_scsi_status = "intermediate condmet"; + break; + case MPI2_SCSI_STATUS_RESERVATION_CONFLICT: + desc_scsi_status = "reservation conflict"; + break; + case MPI2_SCSI_STATUS_COMMAND_TERMINATED: + desc_scsi_status = "command terminated"; + break; + case MPI2_SCSI_STATUS_TASK_SET_FULL: + desc_scsi_status = "task set full"; + break; + case MPI2_SCSI_STATUS_ACA_ACTIVE: + desc_scsi_status = "aca active"; + break; + case MPI2_SCSI_STATUS_TASK_ABORTED: + desc_scsi_status = "task aborted"; + break; + default: + desc_scsi_status = "unknown"; + break; + } + + desc_scsi_state[0] = '\0'; + if (!scsi_state) + desc_scsi_state = " "; + if (scsi_state & MPI2_SCSI_STATE_RESPONSE_INFO_VALID) + strcat(desc_scsi_state, "response info "); + if (scsi_state & MPI2_SCSI_STATE_TERMINATED) + strcat(desc_scsi_state, "state terminated "); + if (scsi_state & MPI2_SCSI_STATE_NO_SCSI_STATUS) + strcat(desc_scsi_state, "no status "); + if (scsi_state & MPI2_SCSI_STATE_AUTOSENSE_FAILED) + strcat(desc_scsi_state, "autosense failed "); + if (scsi_state & MPI2_SCSI_STATE_AUTOSENSE_VALID) + strcat(desc_scsi_state, "autosense valid "); + + scsi_print_command(scmd); + printk(MPT2SAS_WARN_FMT "\tdev handle(0x%04x), " + "ioc_status(%s)(0x%04x), smid(%d)\n", ioc->name, + le16_to_cpu(mpi_reply->DevHandle), desc_ioc_state, + ioc_status, smid); + printk(MPT2SAS_WARN_FMT "\trequest_len(%d), underflow(%d), " + "resid(%d)\n", ioc->name, scsi_bufflen(scmd), scmd->underflow, + scsi_get_resid(scmd)); + printk(MPT2SAS_WARN_FMT "\ttag(%d), transfer_count(%d), " + "sc->result(0x%08x)\n", ioc->name, le16_to_cpu(mpi_reply->TaskTag), + le32_to_cpu(mpi_reply->TransferCount), scmd->result); + printk(MPT2SAS_WARN_FMT "\tscsi_status(%s)(0x%02x), " + "scsi_state(%s)(0x%02x)\n", ioc->name, desc_scsi_status, + scsi_status, desc_scsi_state, scsi_state); + + if (scsi_state & MPI2_SCSI_STATE_AUTOSENSE_VALID) { + struct sense_info data; + _scsih_normalize_sense(scmd->sense_buffer, &data); + printk(MPT2SAS_WARN_FMT "\t[sense_key,asc,ascq]: " + "[0x%02x,0x%02x,0x%02x]\n", ioc->name, data.skey, + data.asc, data.ascq); + } + + if (scsi_state & MPI2_SCSI_STATE_RESPONSE_INFO_VALID) { + response_info = le32_to_cpu(mpi_reply->ResponseInfo); + response_bytes = (u8 *)&response_info; + _scsih_response_code(ioc, response_bytes[3]); + } +} +#endif + +/** + * _scsih_smart_predicted_fault - illuminate Fault LED + * @ioc: per adapter object + * @handle: device handle + * + * Return nothing. + */ +static void +_scsih_smart_predicted_fault(struct MPT2SAS_ADAPTER *ioc, u16 handle) +{ + Mpi2SepReply_t mpi_reply; + Mpi2SepRequest_t mpi_request; + struct scsi_target *starget; + struct MPT2SAS_TARGET *sas_target_priv_data; + Mpi2EventNotificationReply_t *event_reply; + Mpi2EventDataSasDeviceStatusChange_t *event_data; + struct _sas_device *sas_device; + ssize_t sz; + unsigned long flags; + + /* only handle non-raid devices */ + spin_lock_irqsave(&ioc->sas_device_lock, flags); + sas_device = _scsih_sas_device_find_by_handle(ioc, handle); + if (!sas_device) { + spin_unlock_irqrestore(&ioc->sas_device_lock, flags); + return; + } + starget = sas_device->starget; + sas_target_priv_data = starget->hostdata; + + if ((sas_target_priv_data->flags & MPT_TARGET_FLAGS_RAID_COMPONENT) || + ((sas_target_priv_data->flags & MPT_TARGET_FLAGS_VOLUME))) { + spin_unlock_irqrestore(&ioc->sas_device_lock, flags); + return; + } + starget_printk(KERN_WARNING, starget, "predicted fault\n"); + spin_unlock_irqrestore(&ioc->sas_device_lock, flags); + + if (ioc->pdev->subsystem_vendor == PCI_VENDOR_ID_IBM) { + memset(&mpi_request, 0, sizeof(Mpi2SepRequest_t)); + mpi_request.Function = MPI2_FUNCTION_SCSI_ENCLOSURE_PROCESSOR; + mpi_request.Action = MPI2_SEP_REQ_ACTION_WRITE_STATUS; + mpi_request.SlotStatus = + MPI2_SEP_REQ_SLOTSTATUS_PREDICTED_FAULT; + mpi_request.DevHandle = cpu_to_le16(handle); + mpi_request.Flags = MPI2_SEP_REQ_FLAGS_DEVHANDLE_ADDRESS; + if ((mpt2sas_base_scsi_enclosure_processor(ioc, &mpi_reply, + &mpi_request)) != 0) { + printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", + ioc->name, __FILE__, __LINE__, __func__); + return; + } + + if (mpi_reply.IOCStatus || mpi_reply.IOCLogInfo) { + dewtprintk(ioc, printk(MPT2SAS_INFO_FMT + "enclosure_processor: ioc_status (0x%04x), " + "loginfo(0x%08x)\n", ioc->name, + le16_to_cpu(mpi_reply.IOCStatus), + le32_to_cpu(mpi_reply.IOCLogInfo))); + return; + } + } + + /* insert into event log */ + sz = offsetof(Mpi2EventNotificationReply_t, EventData) + + sizeof(Mpi2EventDataSasDeviceStatusChange_t); + event_reply = kzalloc(sz, GFP_KERNEL); + if (!event_reply) { + printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", + ioc->name, __FILE__, __LINE__, __func__); + return; + } + + event_reply->Function = MPI2_FUNCTION_EVENT_NOTIFICATION; + event_reply->Event = + cpu_to_le16(MPI2_EVENT_SAS_DEVICE_STATUS_CHANGE); + event_reply->MsgLength = sz/4; + event_reply->EventDataLength = + cpu_to_le16(sizeof(Mpi2EventDataSasDeviceStatusChange_t)/4); + event_data = (Mpi2EventDataSasDeviceStatusChange_t *) + event_reply->EventData; + event_data->ReasonCode = MPI2_EVENT_SAS_DEV_STAT_RC_SMART_DATA; + event_data->ASC = 0x5D; + event_data->DevHandle = cpu_to_le16(handle); + event_data->SASAddress = cpu_to_le64(sas_target_priv_data->sas_address); + mpt2sas_ctl_add_to_event_log(ioc, event_reply); + kfree(event_reply); +} + +/** + * scsih_io_done - scsi request callback + * @ioc: per adapter object + * @smid: system request message index + * @VF_ID: virtual function id + * @reply: reply message frame(lower 32bit addr) + * + * Callback handler when using scsih_qcmd. + * + * Return nothing. + */ +static void +scsih_io_done(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 VF_ID, u32 reply) +{ + Mpi2SCSIIORequest_t *mpi_request; + Mpi2SCSIIOReply_t *mpi_reply; + struct scsi_cmnd *scmd; + u16 ioc_status; + u32 xfer_cnt; + u8 scsi_state; + u8 scsi_status; + u32 log_info; + struct MPT2SAS_DEVICE *sas_device_priv_data; + u32 response_code; + + mpi_reply = mpt2sas_base_get_reply_virt_addr(ioc, reply); + scmd = _scsih_scsi_lookup_getclear(ioc, smid); + if (scmd == NULL) + return; + + mpi_request = mpt2sas_base_get_msg_frame(ioc, smid); + + if (mpi_reply == NULL) { + scmd->result = DID_OK << 16; + goto out; + } + + sas_device_priv_data = scmd->device->hostdata; + if (!sas_device_priv_data || !sas_device_priv_data->sas_target || + sas_device_priv_data->sas_target->deleted) { + scmd->result = DID_NO_CONNECT << 16; + goto out; + } + + /* turning off TLR */ + if (!sas_device_priv_data->tlr_snoop_check) { + sas_device_priv_data->tlr_snoop_check++; + if (sas_device_priv_data->flags & MPT_DEVICE_TLR_ON) { + response_code = (le32_to_cpu(mpi_reply->ResponseInfo) + >> 24); + if (response_code == + MPI2_SCSITASKMGMT_RSP_INVALID_FRAME) + sas_device_priv_data->flags &= + ~MPT_DEVICE_TLR_ON; + } + } + + xfer_cnt = le32_to_cpu(mpi_reply->TransferCount); + scsi_set_resid(scmd, scsi_bufflen(scmd) - xfer_cnt); + ioc_status = le16_to_cpu(mpi_reply->IOCStatus); + if (ioc_status & MPI2_IOCSTATUS_FLAG_LOG_INFO_AVAILABLE) + log_info = le32_to_cpu(mpi_reply->IOCLogInfo); + else + log_info = 0; + ioc_status &= MPI2_IOCSTATUS_MASK; + scsi_state = mpi_reply->SCSIState; + scsi_status = mpi_reply->SCSIStatus; + + if (ioc_status == MPI2_IOCSTATUS_SCSI_DATA_UNDERRUN && xfer_cnt == 0 && + (scsi_status == MPI2_SCSI_STATUS_BUSY || + scsi_status == MPI2_SCSI_STATUS_RESERVATION_CONFLICT || + scsi_status == MPI2_SCSI_STATUS_TASK_SET_FULL)) { + ioc_status = MPI2_IOCSTATUS_SUCCESS; + } + + if (scsi_state & MPI2_SCSI_STATE_AUTOSENSE_VALID) { + struct sense_info data; + const void *sense_data = mpt2sas_base_get_sense_buffer(ioc, + smid); + memcpy(scmd->sense_buffer, sense_data, + le32_to_cpu(mpi_reply->SenseCount)); + _scsih_normalize_sense(scmd->sense_buffer, &data); + /* failure prediction threshold exceeded */ + if (data.asc == 0x5D) + _scsih_smart_predicted_fault(ioc, + le16_to_cpu(mpi_reply->DevHandle)); + } + + switch (ioc_status) { + case MPI2_IOCSTATUS_BUSY: + case MPI2_IOCSTATUS_INSUFFICIENT_RESOURCES: + scmd->result = SAM_STAT_BUSY; + break; + + case MPI2_IOCSTATUS_SCSI_DEVICE_NOT_THERE: + scmd->result = DID_NO_CONNECT << 16; + break; + + case MPI2_IOCSTATUS_SCSI_IOC_TERMINATED: + if (sas_device_priv_data->block) { + scmd->result = (DID_BUS_BUSY << 16); + break; + } + + case MPI2_IOCSTATUS_SCSI_TASK_TERMINATED: + case MPI2_IOCSTATUS_SCSI_EXT_TERMINATED: + scmd->result = DID_RESET << 16; + break; + + case MPI2_IOCSTATUS_SCSI_RESIDUAL_MISMATCH: + if ((xfer_cnt == 0) || (scmd->underflow > xfer_cnt)) + scmd->result = DID_SOFT_ERROR << 16; + else + scmd->result = (DID_OK << 16) | scsi_status; + break; + + case MPI2_IOCSTATUS_SCSI_DATA_UNDERRUN: + scmd->result = (DID_OK << 16) | scsi_status; + + if ((scsi_state & MPI2_SCSI_STATE_AUTOSENSE_VALID)) + break; + + if (xfer_cnt < scmd->underflow) { + if (scsi_status == SAM_STAT_BUSY) + scmd->result = SAM_STAT_BUSY; + else + scmd->result = DID_SOFT_ERROR << 16; + } else if (scsi_state & (MPI2_SCSI_STATE_AUTOSENSE_FAILED | + MPI2_SCSI_STATE_NO_SCSI_STATUS)) + scmd->result = DID_SOFT_ERROR << 16; + else if (scsi_state & MPI2_SCSI_STATE_TERMINATED) + scmd->result = DID_RESET << 16; + else if (!xfer_cnt && scmd->cmnd[0] == REPORT_LUNS) { + mpi_reply->SCSIState = MPI2_SCSI_STATE_AUTOSENSE_VALID; + mpi_reply->SCSIStatus = SAM_STAT_CHECK_CONDITION; + scmd->result = (DRIVER_SENSE << 24) | + SAM_STAT_CHECK_CONDITION; + scmd->sense_buffer[0] = 0x70; + scmd->sense_buffer[2] = ILLEGAL_REQUEST; + scmd->sense_buffer[12] = 0x20; + scmd->sense_buffer[13] = 0; + } + break; + + case MPI2_IOCSTATUS_SCSI_DATA_OVERRUN: + scsi_set_resid(scmd, 0); + case MPI2_IOCSTATUS_SCSI_RECOVERED_ERROR: + case MPI2_IOCSTATUS_SUCCESS: + scmd->result = (DID_OK << 16) | scsi_status; + if (scsi_state & (MPI2_SCSI_STATE_AUTOSENSE_FAILED | + MPI2_SCSI_STATE_NO_SCSI_STATUS)) + scmd->result = DID_SOFT_ERROR << 16; + else if (scsi_state & MPI2_SCSI_STATE_TERMINATED) + scmd->result = DID_RESET << 16; + break; + + case MPI2_IOCSTATUS_SCSI_PROTOCOL_ERROR: + case MPI2_IOCSTATUS_INVALID_FUNCTION: + case MPI2_IOCSTATUS_INVALID_SGL: + case MPI2_IOCSTATUS_INTERNAL_ERROR: + case MPI2_IOCSTATUS_INVALID_FIELD: + case MPI2_IOCSTATUS_INVALID_STATE: + case MPI2_IOCSTATUS_SCSI_IO_DATA_ERROR: + case MPI2_IOCSTATUS_SCSI_TASK_MGMT_FAILED: + default: + scmd->result = DID_SOFT_ERROR << 16; + break; + + } + +#ifdef CONFIG_SCSI_MPT2SAS_LOGGING + if (scmd->result && (ioc->logging_level & MPT_DEBUG_REPLY)) + _scsih_scsi_ioc_info(ioc , scmd, mpi_reply, smid); +#endif + + out: + scsi_dma_unmap(scmd); + scmd->scsi_done(scmd); +} + +/** + * _scsih_link_change - process phy link changes + * @ioc: per adapter object + * @handle: phy handle + * @attached_handle: valid for devices attached to link + * @phy_number: phy number + * @link_rate: new link rate + * Context: user. + * + * Return nothing. + */ +static void +_scsih_link_change(struct MPT2SAS_ADAPTER *ioc, u16 handle, u16 attached_handle, + u8 phy_number, u8 link_rate) +{ + mpt2sas_transport_update_phy_link_change(ioc, handle, attached_handle, + phy_number, link_rate); +} + +/** + * _scsih_sas_host_refresh - refreshing sas host object contents + * @ioc: per adapter object + * @update: update link information + * Context: user + * + * During port enable, fw will send topology events for every device. Its + * possible that the handles may change from the previous setting, so this + * code keeping handles updating if changed. + * + * Return nothing. + */ +static void +_scsih_sas_host_refresh(struct MPT2SAS_ADAPTER *ioc, u8 update) +{ + u16 sz; + u16 ioc_status; + int i; + Mpi2ConfigReply_t mpi_reply; + Mpi2SasIOUnitPage0_t *sas_iounit_pg0 = NULL; + + dtmprintk(ioc, printk(MPT2SAS_INFO_FMT + "updating handles for sas_host(0x%016llx)\n", + ioc->name, (unsigned long long)ioc->sas_hba.sas_address)); + + sz = offsetof(Mpi2SasIOUnitPage0_t, PhyData) + (ioc->sas_hba.num_phys + * sizeof(Mpi2SasIOUnit0PhyData_t)); + sas_iounit_pg0 = kzalloc(sz, GFP_KERNEL); + if (!sas_iounit_pg0) { + printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", + ioc->name, __FILE__, __LINE__, __func__); + return; + } + if (!(mpt2sas_config_get_sas_iounit_pg0(ioc, &mpi_reply, + sas_iounit_pg0, sz))) { + ioc_status = le16_to_cpu(mpi_reply.IOCStatus) & + MPI2_IOCSTATUS_MASK; + if (ioc_status != MPI2_IOCSTATUS_SUCCESS) + goto out; + for (i = 0; i < ioc->sas_hba.num_phys ; i++) { + ioc->sas_hba.phy[i].handle = + le16_to_cpu(sas_iounit_pg0->PhyData[i]. + ControllerDevHandle); + if (update) + _scsih_link_change(ioc, + ioc->sas_hba.phy[i].handle, + le16_to_cpu(sas_iounit_pg0->PhyData[i]. + AttachedDevHandle), i, + sas_iounit_pg0->PhyData[i]. + NegotiatedLinkRate >> 4); + } + } + + out: + kfree(sas_iounit_pg0); +} + +/** + * _scsih_sas_host_add - create sas host object + * @ioc: per adapter object + * + * Creating host side data object, stored in ioc->sas_hba + * + * Return nothing. + */ +static void +_scsih_sas_host_add(struct MPT2SAS_ADAPTER *ioc) +{ + int i; + Mpi2ConfigReply_t mpi_reply; + Mpi2SasIOUnitPage0_t *sas_iounit_pg0 = NULL; + Mpi2SasIOUnitPage1_t *sas_iounit_pg1 = NULL; + Mpi2SasPhyPage0_t phy_pg0; + Mpi2SasDevicePage0_t sas_device_pg0; + Mpi2SasEnclosurePage0_t enclosure_pg0; + u16 ioc_status; + u16 sz; + u16 device_missing_delay; + + mpt2sas_config_get_number_hba_phys(ioc, &ioc->sas_hba.num_phys); + if (!ioc->sas_hba.num_phys) { + printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", + ioc->name, __FILE__, __LINE__, __func__); + return; + } + + /* sas_iounit page 0 */ + sz = offsetof(Mpi2SasIOUnitPage0_t, PhyData) + (ioc->sas_hba.num_phys * + sizeof(Mpi2SasIOUnit0PhyData_t)); + sas_iounit_pg0 = kzalloc(sz, GFP_KERNEL); + if (!sas_iounit_pg0) { + printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", + ioc->name, __FILE__, __LINE__, __func__); + return; + } + if ((mpt2sas_config_get_sas_iounit_pg0(ioc, &mpi_reply, + sas_iounit_pg0, sz))) { + printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", + ioc->name, __FILE__, __LINE__, __func__); + goto out; + } + ioc_status = le16_to_cpu(mpi_reply.IOCStatus) & + MPI2_IOCSTATUS_MASK; + if (ioc_status != MPI2_IOCSTATUS_SUCCESS) { + printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", + ioc->name, __FILE__, __LINE__, __func__); + goto out; + } + + /* sas_iounit page 1 */ + sz = offsetof(Mpi2SasIOUnitPage1_t, PhyData) + (ioc->sas_hba.num_phys * + sizeof(Mpi2SasIOUnit1PhyData_t)); + sas_iounit_pg1 = kzalloc(sz, GFP_KERNEL); + if (!sas_iounit_pg1) { + printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", + ioc->name, __FILE__, __LINE__, __func__); + goto out; + } + if ((mpt2sas_config_get_sas_iounit_pg1(ioc, &mpi_reply, + sas_iounit_pg1, sz))) { + printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", + ioc->name, __FILE__, __LINE__, __func__); + goto out; + } + ioc_status = le16_to_cpu(mpi_reply.IOCStatus) & + MPI2_IOCSTATUS_MASK; + if (ioc_status != MPI2_IOCSTATUS_SUCCESS) { + printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", + ioc->name, __FILE__, __LINE__, __func__); + goto out; + } + + ioc->io_missing_delay = + le16_to_cpu(sas_iounit_pg1->IODeviceMissingDelay); + device_missing_delay = + le16_to_cpu(sas_iounit_pg1->ReportDeviceMissingDelay); + if (device_missing_delay & MPI2_SASIOUNIT1_REPORT_MISSING_UNIT_16) + ioc->device_missing_delay = (device_missing_delay & + MPI2_SASIOUNIT1_REPORT_MISSING_TIMEOUT_MASK) * 16; + else + ioc->device_missing_delay = device_missing_delay & + MPI2_SASIOUNIT1_REPORT_MISSING_TIMEOUT_MASK; + + ioc->sas_hba.parent_dev = &ioc->shost->shost_gendev; + ioc->sas_hba.phy = kcalloc(ioc->sas_hba.num_phys, + sizeof(struct _sas_phy), GFP_KERNEL); + if (!ioc->sas_hba.phy) { + printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", + ioc->name, __FILE__, __LINE__, __func__); + goto out; + } + for (i = 0; i < ioc->sas_hba.num_phys ; i++) { + if ((mpt2sas_config_get_phy_pg0(ioc, &mpi_reply, &phy_pg0, + i))) { + printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", + ioc->name, __FILE__, __LINE__, __func__); + goto out; + } + ioc_status = le16_to_cpu(mpi_reply.IOCStatus) & + MPI2_IOCSTATUS_MASK; + if (ioc_status != MPI2_IOCSTATUS_SUCCESS) { + printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", + ioc->name, __FILE__, __LINE__, __func__); + goto out; + } + ioc->sas_hba.phy[i].handle = + le16_to_cpu(sas_iounit_pg0->PhyData[i].ControllerDevHandle); + ioc->sas_hba.phy[i].phy_id = i; + mpt2sas_transport_add_host_phy(ioc, &ioc->sas_hba.phy[i], + phy_pg0, ioc->sas_hba.parent_dev); + } + if ((mpt2sas_config_get_sas_device_pg0(ioc, &mpi_reply, &sas_device_pg0, + MPI2_SAS_DEVICE_PGAD_FORM_HANDLE, ioc->sas_hba.phy[0].handle))) { + printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", + ioc->name, __FILE__, __LINE__, __func__); + goto out; + } + ioc->sas_hba.handle = le16_to_cpu(sas_device_pg0.DevHandle); + ioc->sas_hba.enclosure_handle = + le16_to_cpu(sas_device_pg0.EnclosureHandle); + ioc->sas_hba.sas_address = le64_to_cpu(sas_device_pg0.SASAddress); + printk(MPT2SAS_INFO_FMT "host_add: handle(0x%04x), " + "sas_addr(0x%016llx), phys(%d)\n", ioc->name, ioc->sas_hba.handle, + (unsigned long long) ioc->sas_hba.sas_address, + ioc->sas_hba.num_phys) ; + + if (ioc->sas_hba.enclosure_handle) { + if (!(mpt2sas_config_get_enclosure_pg0(ioc, &mpi_reply, + &enclosure_pg0, + MPI2_SAS_ENCLOS_PGAD_FORM_HANDLE, + ioc->sas_hba.enclosure_handle))) { + ioc->sas_hba.enclosure_logical_id = + le64_to_cpu(enclosure_pg0.EnclosureLogicalID); + } + } + + out: + kfree(sas_iounit_pg1); + kfree(sas_iounit_pg0); +} + +/** + * _scsih_expander_add - creating expander object + * @ioc: per adapter object + * @handle: expander handle + * + * Creating expander object, stored in ioc->sas_expander_list. + * + * Return 0 for success, else error. + */ +static int +_scsih_expander_add(struct MPT2SAS_ADAPTER *ioc, u16 handle) +{ + struct _sas_node *sas_expander; + Mpi2ConfigReply_t mpi_reply; + Mpi2ExpanderPage0_t expander_pg0; + Mpi2ExpanderPage1_t expander_pg1; + Mpi2SasEnclosurePage0_t enclosure_pg0; + u32 ioc_status; + u16 parent_handle; + __le64 sas_address; + int i; + unsigned long flags; + struct _sas_port *mpt2sas_port; + int rc = 0; + + if (!handle) + return -1; + + if ((mpt2sas_config_get_expander_pg0(ioc, &mpi_reply, &expander_pg0, + MPI2_SAS_EXPAND_PGAD_FORM_HNDL, handle))) { + printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", + ioc->name, __FILE__, __LINE__, __func__); + return -1; + } + + ioc_status = le16_to_cpu(mpi_reply.IOCStatus) & + MPI2_IOCSTATUS_MASK; + if (ioc_status != MPI2_IOCSTATUS_SUCCESS) { + printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", + ioc->name, __FILE__, __LINE__, __func__); + return -1; + } + + /* handle out of order topology events */ + parent_handle = le16_to_cpu(expander_pg0.ParentDevHandle); + if (parent_handle >= ioc->sas_hba.num_phys) { + spin_lock_irqsave(&ioc->sas_node_lock, flags); + sas_expander = mpt2sas_scsih_expander_find_by_handle(ioc, + parent_handle); + spin_unlock_irqrestore(&ioc->sas_node_lock, flags); + if (!sas_expander) { + rc = _scsih_expander_add(ioc, parent_handle); + if (rc != 0) + return rc; + } + } + + sas_address = le64_to_cpu(expander_pg0.SASAddress); + + spin_lock_irqsave(&ioc->sas_node_lock, flags); + sas_expander = mpt2sas_scsih_expander_find_by_sas_address(ioc, + sas_address); + spin_unlock_irqrestore(&ioc->sas_node_lock, flags); + + if (sas_expander) + return 0; + + sas_expander = kzalloc(sizeof(struct _sas_node), + GFP_KERNEL); + if (!sas_expander) { + printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", + ioc->name, __FILE__, __LINE__, __func__); + return -1; + } + + sas_expander->handle = handle; + sas_expander->num_phys = expander_pg0.NumPhys; + sas_expander->parent_handle = parent_handle; + sas_expander->enclosure_handle = + le16_to_cpu(expander_pg0.EnclosureHandle); + sas_expander->sas_address = sas_address; + + printk(MPT2SAS_INFO_FMT "expander_add: handle(0x%04x)," + " parent(0x%04x), sas_addr(0x%016llx), phys(%d)\n", ioc->name, + handle, sas_expander->parent_handle, (unsigned long long) + sas_expander->sas_address, sas_expander->num_phys); + + if (!sas_expander->num_phys) + goto out_fail; + sas_expander->phy = kcalloc(sas_expander->num_phys, + sizeof(struct _sas_phy), GFP_KERNEL); + if (!sas_expander->phy) { + printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", + ioc->name, __FILE__, __LINE__, __func__); + rc = -1; + goto out_fail; + } + + INIT_LIST_HEAD(&sas_expander->sas_port_list); + mpt2sas_port = mpt2sas_transport_port_add(ioc, handle, + sas_expander->parent_handle); + if (!mpt2sas_port) { + printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", + ioc->name, __FILE__, __LINE__, __func__); + rc = -1; + goto out_fail; + } + sas_expander->parent_dev = &mpt2sas_port->rphy->dev; + + for (i = 0 ; i < sas_expander->num_phys ; i++) { + if ((mpt2sas_config_get_expander_pg1(ioc, &mpi_reply, + &expander_pg1, i, handle))) { + printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", + ioc->name, __FILE__, __LINE__, __func__); + continue; + } + sas_expander->phy[i].handle = handle; + sas_expander->phy[i].phy_id = i; + mpt2sas_transport_add_expander_phy(ioc, &sas_expander->phy[i], + expander_pg1, sas_expander->parent_dev); + } + + if (sas_expander->enclosure_handle) { + if (!(mpt2sas_config_get_enclosure_pg0(ioc, &mpi_reply, + &enclosure_pg0, MPI2_SAS_ENCLOS_PGAD_FORM_HANDLE, + sas_expander->enclosure_handle))) { + sas_expander->enclosure_logical_id = + le64_to_cpu(enclosure_pg0.EnclosureLogicalID); + } + } + + _scsih_expander_node_add(ioc, sas_expander); + return 0; + + out_fail: + + if (sas_expander) + kfree(sas_expander->phy); + kfree(sas_expander); + return rc; +} + +/** + * _scsih_expander_remove - removing expander object + * @ioc: per adapter object + * @handle: expander handle + * + * Return nothing. + */ +static void +_scsih_expander_remove(struct MPT2SAS_ADAPTER *ioc, u16 handle) +{ + struct _sas_node *sas_expander; + unsigned long flags; + + spin_lock_irqsave(&ioc->sas_node_lock, flags); + sas_expander = mpt2sas_scsih_expander_find_by_handle(ioc, handle); + spin_unlock_irqrestore(&ioc->sas_node_lock, flags); + _scsih_expander_node_remove(ioc, sas_expander); +} + +/** + * _scsih_add_device - creating sas device object + * @ioc: per adapter object + * @handle: sas device handle + * @phy_num: phy number end device attached to + * @is_pd: is this hidden raid component + * + * Creating end device object, stored in ioc->sas_device_list. + * + * Returns 0 for success, non-zero for failure. + */ +static int +_scsih_add_device(struct MPT2SAS_ADAPTER *ioc, u16 handle, u8 phy_num, u8 is_pd) +{ + Mpi2ConfigReply_t mpi_reply; + Mpi2SasDevicePage0_t sas_device_pg0; + Mpi2SasEnclosurePage0_t enclosure_pg0; + struct _sas_device *sas_device; + u32 ioc_status; + __le64 sas_address; + u32 device_info; + unsigned long flags; + + if ((mpt2sas_config_get_sas_device_pg0(ioc, &mpi_reply, &sas_device_pg0, + MPI2_SAS_DEVICE_PGAD_FORM_HANDLE, handle))) { + printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", + ioc->name, __FILE__, __LINE__, __func__); + return -1; + } + + ioc_status = le16_to_cpu(mpi_reply.IOCStatus) & + MPI2_IOCSTATUS_MASK; + if (ioc_status != MPI2_IOCSTATUS_SUCCESS) { + printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", + ioc->name, __FILE__, __LINE__, __func__); + return -1; + } + + /* check if device is present */ + if (!(le16_to_cpu(sas_device_pg0.Flags) & + MPI2_SAS_DEVICE0_FLAGS_DEVICE_PRESENT)) { + printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", + ioc->name, __FILE__, __LINE__, __func__); + printk(MPT2SAS_ERR_FMT "Flags = 0x%04x\n", + ioc->name, le16_to_cpu(sas_device_pg0.Flags)); + return -1; + } + + /* check if there were any issus with discovery */ + if (sas_device_pg0.AccessStatus == + MPI2_SAS_DEVICE0_ASTATUS_SATA_INIT_FAILED) { + printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", + ioc->name, __FILE__, __LINE__, __func__); + printk(MPT2SAS_ERR_FMT "AccessStatus = 0x%02x\n", + ioc->name, sas_device_pg0.AccessStatus); + return -1; + } + + /* check if this is end device */ + device_info = le32_to_cpu(sas_device_pg0.DeviceInfo); + if (!(_scsih_is_end_device(device_info))) { + printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", + ioc->name, __FILE__, __LINE__, __func__); + return -1; + } + + sas_address = le64_to_cpu(sas_device_pg0.SASAddress); + + spin_lock_irqsave(&ioc->sas_device_lock, flags); + sas_device = mpt2sas_scsih_sas_device_find_by_sas_address(ioc, + sas_address); + spin_unlock_irqrestore(&ioc->sas_device_lock, flags); + + if (sas_device) { + _scsih_ublock_io_device(ioc, handle); + return 0; + } + + sas_device = kzalloc(sizeof(struct _sas_device), + GFP_KERNEL); + if (!sas_device) { + printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", + ioc->name, __FILE__, __LINE__, __func__); + return -1; + } + + sas_device->handle = handle; + sas_device->parent_handle = + le16_to_cpu(sas_device_pg0.ParentDevHandle); + sas_device->enclosure_handle = + le16_to_cpu(sas_device_pg0.EnclosureHandle); + sas_device->slot = + le16_to_cpu(sas_device_pg0.Slot); + sas_device->device_info = device_info; + sas_device->sas_address = sas_address; + sas_device->hidden_raid_component = is_pd; + + /* get enclosure_logical_id */ + if (!(mpt2sas_config_get_enclosure_pg0(ioc, &mpi_reply, &enclosure_pg0, + MPI2_SAS_ENCLOS_PGAD_FORM_HANDLE, + sas_device->enclosure_handle))) { + sas_device->enclosure_logical_id = + le64_to_cpu(enclosure_pg0.EnclosureLogicalID); + } + + /* get device name */ + sas_device->device_name = le64_to_cpu(sas_device_pg0.DeviceName); + + if (ioc->wait_for_port_enable_to_complete) + _scsih_sas_device_init_add(ioc, sas_device); + else + _scsih_sas_device_add(ioc, sas_device); + + return 0; +} + +/** + * _scsih_remove_device - removing sas device object + * @ioc: per adapter object + * @handle: sas device handle + * + * Return nothing. + */ +static void +_scsih_remove_device(struct MPT2SAS_ADAPTER *ioc, u16 handle) +{ + struct MPT2SAS_TARGET *sas_target_priv_data; + struct _sas_device *sas_device; + unsigned long flags; + Mpi2SasIoUnitControlReply_t mpi_reply; + Mpi2SasIoUnitControlRequest_t mpi_request; + u16 device_handle; + + /* lookup sas_device */ + spin_lock_irqsave(&ioc->sas_device_lock, flags); + sas_device = _scsih_sas_device_find_by_handle(ioc, handle); + if (!sas_device) { + spin_unlock_irqrestore(&ioc->sas_device_lock, flags); + return; + } + + dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: enter: handle" + "(0x%04x)\n", ioc->name, __func__, handle)); + + if (sas_device->starget && sas_device->starget->hostdata) { + sas_target_priv_data = sas_device->starget->hostdata; + sas_target_priv_data->deleted = 1; + } + spin_unlock_irqrestore(&ioc->sas_device_lock, flags); + + if (ioc->remove_host) + goto out; + + /* Target Reset to flush out all the outstanding IO */ + device_handle = (sas_device->hidden_raid_component) ? + sas_device->volume_handle : handle; + if (device_handle) { + dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "issue target reset: " + "handle(0x%04x)\n", ioc->name, device_handle)); + mutex_lock(&ioc->tm_cmds.mutex); + mpt2sas_scsih_issue_tm(ioc, device_handle, 0, + MPI2_SCSITASKMGMT_TASKTYPE_TARGET_RESET, 0, 10); + ioc->tm_cmds.status = MPT2_CMD_NOT_USED; + mutex_unlock(&ioc->tm_cmds.mutex); + dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "issue target reset " + "done: handle(0x%04x)\n", ioc->name, device_handle)); + } + + /* SAS_IO_UNIT_CNTR - send REMOVE_DEVICE */ + dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "sas_iounit: handle" + "(0x%04x)\n", ioc->name, handle)); + memset(&mpi_request, 0, sizeof(Mpi2SasIoUnitControlRequest_t)); + mpi_request.Function = MPI2_FUNCTION_SAS_IO_UNIT_CONTROL; + mpi_request.Operation = MPI2_SAS_OP_REMOVE_DEVICE; + mpi_request.DevHandle = handle; + mpi_request.VF_ID = 0; + if ((mpt2sas_base_sas_iounit_control(ioc, &mpi_reply, + &mpi_request)) != 0) { + printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", + ioc->name, __FILE__, __LINE__, __func__); + } + + dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "sas_iounit: ioc_status" + "(0x%04x), loginfo(0x%08x)\n", ioc->name, + le16_to_cpu(mpi_reply.IOCStatus), + le32_to_cpu(mpi_reply.IOCLogInfo))); + + out: + mpt2sas_transport_port_remove(ioc, sas_device->sas_address, + sas_device->parent_handle); + + printk(MPT2SAS_INFO_FMT "removing handle(0x%04x), sas_addr" + "(0x%016llx)\n", ioc->name, sas_device->handle, + (unsigned long long) sas_device->sas_address); + _scsih_sas_device_remove(ioc, sas_device); + + dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: exit: handle" + "(0x%04x)\n", ioc->name, __func__, handle)); +} + +#ifdef CONFIG_SCSI_MPT2SAS_LOGGING +/** + * _scsih_sas_topology_change_event_debug - debug for topology event + * @ioc: per adapter object + * @event_data: event data payload + * Context: user. + */ +static void +_scsih_sas_topology_change_event_debug(struct MPT2SAS_ADAPTER *ioc, + Mpi2EventDataSasTopologyChangeList_t *event_data) +{ + int i; + u16 handle; + u16 reason_code; + u8 phy_number; + char *status_str = NULL; + char link_rate[25]; + + switch (event_data->ExpStatus) { + case MPI2_EVENT_SAS_TOPO_ES_ADDED: + status_str = "add"; + break; + case MPI2_EVENT_SAS_TOPO_ES_NOT_RESPONDING: + status_str = "remove"; + break; + case MPI2_EVENT_SAS_TOPO_ES_RESPONDING: + status_str = "responding"; + break; + case MPI2_EVENT_SAS_TOPO_ES_DELAY_NOT_RESPONDING: + status_str = "remove delay"; + break; + default: + status_str = "unknown status"; + break; + } + printk(MPT2SAS_DEBUG_FMT "sas topology change: (%s)\n", + ioc->name, status_str); + printk(KERN_DEBUG "\thandle(0x%04x), enclosure_handle(0x%04x) " + "start_phy(%02d), count(%d)\n", + le16_to_cpu(event_data->ExpanderDevHandle), + le16_to_cpu(event_data->EnclosureHandle), + event_data->StartPhyNum, event_data->NumEntries); + for (i = 0; i < event_data->NumEntries; i++) { + handle = le16_to_cpu(event_data->PHY[i].AttachedDevHandle); + if (!handle) + continue; + phy_number = event_data->StartPhyNum + i; + reason_code = event_data->PHY[i].PhyStatus & + MPI2_EVENT_SAS_TOPO_RC_MASK; + switch (reason_code) { + case MPI2_EVENT_SAS_TOPO_RC_TARG_ADDED: + snprintf(link_rate, 25, ": add, link(0x%02x)", + (event_data->PHY[i].LinkRate >> 4)); + status_str = link_rate; + break; + case MPI2_EVENT_SAS_TOPO_RC_TARG_NOT_RESPONDING: + status_str = ": remove"; + break; + case MPI2_EVENT_SAS_TOPO_RC_DELAY_NOT_RESPONDING: + status_str = ": remove_delay"; + break; + case MPI2_EVENT_SAS_TOPO_RC_PHY_CHANGED: + snprintf(link_rate, 25, ": link(0x%02x)", + (event_data->PHY[i].LinkRate >> 4)); + status_str = link_rate; + break; + case MPI2_EVENT_SAS_TOPO_RC_NO_CHANGE: + status_str = ": responding"; + break; + default: + status_str = ": unknown"; + break; + } + printk(KERN_DEBUG "\tphy(%02d), attached_handle(0x%04x)%s\n", + phy_number, handle, status_str); + } +} +#endif + +/** + * _scsih_sas_topology_change_event - handle topology changes + * @ioc: per adapter object + * @VF_ID: + * @event_data: event data payload + * fw_event: + * Context: user. + * + */ +static void +_scsih_sas_topology_change_event(struct MPT2SAS_ADAPTER *ioc, u8 VF_ID, + Mpi2EventDataSasTopologyChangeList_t *event_data, + struct fw_event_work *fw_event) +{ + int i; + u16 parent_handle, handle; + u16 reason_code; + u8 phy_number; + struct _sas_node *sas_expander; + unsigned long flags; + u8 link_rate_; + +#ifdef CONFIG_SCSI_MPT2SAS_LOGGING + if (ioc->logging_level & MPT_DEBUG_EVENT_WORK_TASK) + _scsih_sas_topology_change_event_debug(ioc, event_data); +#endif + + if (!ioc->sas_hba.num_phys) + _scsih_sas_host_add(ioc); + else + _scsih_sas_host_refresh(ioc, 0); + + if (fw_event->ignore) { + dewtprintk(ioc, printk(MPT2SAS_DEBUG_FMT "ignoring expander " + "event\n", ioc->name)); + return; + } + + parent_handle = le16_to_cpu(event_data->ExpanderDevHandle); + + /* handle expander add */ + if (event_data->ExpStatus == MPI2_EVENT_SAS_TOPO_ES_ADDED) + if (_scsih_expander_add(ioc, parent_handle) != 0) + return; + + /* handle siblings events */ + for (i = 0; i < event_data->NumEntries; i++) { + if (fw_event->ignore) { + dewtprintk(ioc, printk(MPT2SAS_DEBUG_FMT "ignoring " + "expander event\n", ioc->name)); + return; + } + if (event_data->PHY[i].PhyStatus & + MPI2_EVENT_SAS_TOPO_PHYSTATUS_VACANT) + continue; + handle = le16_to_cpu(event_data->PHY[i].AttachedDevHandle); + if (!handle) + continue; + phy_number = event_data->StartPhyNum + i; + reason_code = event_data->PHY[i].PhyStatus & + MPI2_EVENT_SAS_TOPO_RC_MASK; + link_rate_ = event_data->PHY[i].LinkRate >> 4; + switch (reason_code) { + case MPI2_EVENT_SAS_TOPO_RC_PHY_CHANGED: + case MPI2_EVENT_SAS_TOPO_RC_TARG_ADDED: + if (!parent_handle) { + if (phy_number < ioc->sas_hba.num_phys) + _scsih_link_change(ioc, + ioc->sas_hba.phy[phy_number].handle, + handle, phy_number, link_rate_); + } else { + spin_lock_irqsave(&ioc->sas_node_lock, flags); + sas_expander = + mpt2sas_scsih_expander_find_by_handle(ioc, + parent_handle); + spin_unlock_irqrestore(&ioc->sas_node_lock, + flags); + if (sas_expander) { + if (phy_number < sas_expander->num_phys) + _scsih_link_change(ioc, + sas_expander-> + phy[phy_number].handle, + handle, phy_number, + link_rate_); + } + } + if (reason_code == MPI2_EVENT_SAS_TOPO_RC_PHY_CHANGED) { + if (link_rate_ >= MPI2_SAS_NEG_LINK_RATE_1_5) + _scsih_ublock_io_device(ioc, handle); + } + if (reason_code == MPI2_EVENT_SAS_TOPO_RC_TARG_ADDED) { + if (link_rate_ < MPI2_SAS_NEG_LINK_RATE_1_5) + break; + _scsih_add_device(ioc, handle, phy_number, 0); + } + break; + case MPI2_EVENT_SAS_TOPO_RC_TARG_NOT_RESPONDING: + _scsih_remove_device(ioc, handle); + break; + } + } + + /* handle expander removal */ + if (event_data->ExpStatus == MPI2_EVENT_SAS_TOPO_ES_NOT_RESPONDING) + _scsih_expander_remove(ioc, parent_handle); + +} + +#ifdef CONFIG_SCSI_MPT2SAS_LOGGING +/** + * _scsih_sas_device_status_change_event_debug - debug for device event + * @event_data: event data payload + * Context: user. + * + * Return nothing. + */ +static void +_scsih_sas_device_status_change_event_debug(struct MPT2SAS_ADAPTER *ioc, + Mpi2EventDataSasDeviceStatusChange_t *event_data) +{ + char *reason_str = NULL; + + switch (event_data->ReasonCode) { + case MPI2_EVENT_SAS_DEV_STAT_RC_SMART_DATA: + reason_str = "smart data"; + break; + case MPI2_EVENT_SAS_DEV_STAT_RC_UNSUPPORTED: + reason_str = "unsupported device discovered"; + break; + case MPI2_EVENT_SAS_DEV_STAT_RC_INTERNAL_DEVICE_RESET: + reason_str = "internal device reset"; + break; + case MPI2_EVENT_SAS_DEV_STAT_RC_TASK_ABORT_INTERNAL: + reason_str = "internal task abort"; + break; + case MPI2_EVENT_SAS_DEV_STAT_RC_ABORT_TASK_SET_INTERNAL: + reason_str = "internal task abort set"; + break; + case MPI2_EVENT_SAS_DEV_STAT_RC_CLEAR_TASK_SET_INTERNAL: + reason_str = "internal clear task set"; + break; + case MPI2_EVENT_SAS_DEV_STAT_RC_QUERY_TASK_INTERNAL: + reason_str = "internal query task"; + break; + case MPI2_EVENT_SAS_DEV_STAT_RC_SATA_INIT_FAILURE: + reason_str = "sata init failure"; + break; + case MPI2_EVENT_SAS_DEV_STAT_RC_CMP_INTERNAL_DEV_RESET: + reason_str = "internal device reset complete"; + break; + case MPI2_EVENT_SAS_DEV_STAT_RC_CMP_TASK_ABORT_INTERNAL: + reason_str = "internal task abort complete"; + break; + case MPI2_EVENT_SAS_DEV_STAT_RC_ASYNC_NOTIFICATION: + reason_str = "internal async notification"; + break; + default: + reason_str = "unknown reason"; + break; + } + printk(MPT2SAS_DEBUG_FMT "device status change: (%s)\n" + "\thandle(0x%04x), sas address(0x%016llx)", ioc->name, + reason_str, le16_to_cpu(event_data->DevHandle), + (unsigned long long)le64_to_cpu(event_data->SASAddress)); + if (event_data->ReasonCode == MPI2_EVENT_SAS_DEV_STAT_RC_SMART_DATA) + printk(MPT2SAS_DEBUG_FMT ", ASC(0x%x), ASCQ(0x%x)\n", ioc->name, + event_data->ASC, event_data->ASCQ); + printk(KERN_INFO "\n"); +} +#endif + +/** + * _scsih_sas_device_status_change_event - handle device status change + * @ioc: per adapter object + * @VF_ID: + * @event_data: event data payload + * Context: user. + * + * Return nothing. + */ +static void +_scsih_sas_device_status_change_event(struct MPT2SAS_ADAPTER *ioc, u8 VF_ID, + Mpi2EventDataSasDeviceStatusChange_t *event_data) +{ +#ifdef CONFIG_SCSI_MPT2SAS_LOGGING + if (ioc->logging_level & MPT_DEBUG_EVENT_WORK_TASK) + _scsih_sas_device_status_change_event_debug(ioc, event_data); +#endif +} + +#ifdef CONFIG_SCSI_MPT2SAS_LOGGING +/** + * _scsih_sas_enclosure_dev_status_change_event_debug - debug for enclosure event + * @ioc: per adapter object + * @event_data: event data payload + * Context: user. + * + * Return nothing. + */ +static void +_scsih_sas_enclosure_dev_status_change_event_debug(struct MPT2SAS_ADAPTER *ioc, + Mpi2EventDataSasEnclDevStatusChange_t *event_data) +{ + char *reason_str = NULL; + + switch (event_data->ReasonCode) { + case MPI2_EVENT_SAS_ENCL_RC_ADDED: + reason_str = "enclosure add"; + break; + case MPI2_EVENT_SAS_ENCL_RC_NOT_RESPONDING: + reason_str = "enclosure remove"; + break; + default: + reason_str = "unknown reason"; + break; + } + + printk(MPT2SAS_DEBUG_FMT "enclosure status change: (%s)\n" + "\thandle(0x%04x), enclosure logical id(0x%016llx)" + " number slots(%d)\n", ioc->name, reason_str, + le16_to_cpu(event_data->EnclosureHandle), + (unsigned long long)le64_to_cpu(event_data->EnclosureLogicalID), + le16_to_cpu(event_data->StartSlot)); +} +#endif + +/** + * _scsih_sas_enclosure_dev_status_change_event - handle enclosure events + * @ioc: per adapter object + * @VF_ID: + * @event_data: event data payload + * Context: user. + * + * Return nothing. + */ +static void +_scsih_sas_enclosure_dev_status_change_event(struct MPT2SAS_ADAPTER *ioc, + u8 VF_ID, Mpi2EventDataSasEnclDevStatusChange_t *event_data) +{ +#ifdef CONFIG_SCSI_MPT2SAS_LOGGING + if (ioc->logging_level & MPT_DEBUG_EVENT_WORK_TASK) + _scsih_sas_enclosure_dev_status_change_event_debug(ioc, + event_data); +#endif +} + +/** + * _scsih_sas_broadcast_primative_event - handle broadcast events + * @ioc: per adapter object + * @event_data: event data payload + * Context: user. + * + * Return nothing. + */ +static void +_scsih_sas_broadcast_primative_event(struct MPT2SAS_ADAPTER *ioc, u8 VF_ID, + Mpi2EventDataSasBroadcastPrimitive_t *event_data) +{ + struct scsi_cmnd *scmd; + u16 smid, handle; + u32 lun; + struct MPT2SAS_DEVICE *sas_device_priv_data; + u32 termination_count; + u32 query_count; + Mpi2SCSITaskManagementReply_t *mpi_reply; + + dewtprintk(ioc, printk(MPT2SAS_DEBUG_FMT "broadcast primative: " + "phy number(%d), width(%d)\n", ioc->name, event_data->PhyNum, + event_data->PortWidth)); + + dtmprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s: enter\n", ioc->name, + __func__)); + + mutex_lock(&ioc->tm_cmds.mutex); + termination_count = 0; + query_count = 0; + mpi_reply = ioc->tm_cmds.reply; + for (smid = 1; smid <= ioc->request_depth; smid++) { + scmd = _scsih_scsi_lookup_get(ioc, smid); + if (!scmd) + continue; + sas_device_priv_data = scmd->device->hostdata; + if (!sas_device_priv_data || !sas_device_priv_data->sas_target) + continue; + /* skip hidden raid components */ + if (sas_device_priv_data->sas_target->flags & + MPT_TARGET_FLAGS_RAID_COMPONENT) + continue; + /* skip volumes */ + if (sas_device_priv_data->sas_target->flags & + MPT_TARGET_FLAGS_VOLUME) + continue; + + handle = sas_device_priv_data->sas_target->handle; + lun = sas_device_priv_data->lun; + query_count++; + + mpt2sas_scsih_issue_tm(ioc, handle, lun, + MPI2_SCSITASKMGMT_TASKTYPE_QUERY_TASK, smid, 30); + termination_count += le32_to_cpu(mpi_reply->TerminationCount); + + if ((mpi_reply->IOCStatus == MPI2_IOCSTATUS_SUCCESS) && + (mpi_reply->ResponseCode == + MPI2_SCSITASKMGMT_RSP_TM_SUCCEEDED || + mpi_reply->ResponseCode == + MPI2_SCSITASKMGMT_RSP_IO_QUEUED_ON_IOC)) + continue; + + mpt2sas_scsih_issue_tm(ioc, handle, lun, + MPI2_SCSITASKMGMT_TASKTYPE_ABRT_TASK_SET, smid, 30); + termination_count += le32_to_cpu(mpi_reply->TerminationCount); + } + ioc->tm_cmds.status = MPT2_CMD_NOT_USED; + ioc->broadcast_aen_busy = 0; + mutex_unlock(&ioc->tm_cmds.mutex); + + dtmprintk(ioc, printk(MPT2SAS_DEBUG_FMT + "%s - exit, query_count = %d termination_count = %d\n", + ioc->name, __func__, query_count, termination_count)); +} + +/** + * _scsih_sas_discovery_event - handle discovery events + * @ioc: per adapter object + * @event_data: event data payload + * Context: user. + * + * Return nothing. + */ +static void +_scsih_sas_discovery_event(struct MPT2SAS_ADAPTER *ioc, u8 VF_ID, + Mpi2EventDataSasDiscovery_t *event_data) +{ +#ifdef CONFIG_SCSI_MPT2SAS_LOGGING + if (ioc->logging_level & MPT_DEBUG_EVENT_WORK_TASK) { + printk(MPT2SAS_DEBUG_FMT "discovery event: (%s)", ioc->name, + (event_data->ReasonCode == MPI2_EVENT_SAS_DISC_RC_STARTED) ? + "start" : "stop"); + if (event_data->DiscoveryStatus) + printk(MPT2SAS_DEBUG_FMT ", discovery_status(0x%08x)", + ioc->name, le32_to_cpu(event_data->DiscoveryStatus)); + printk("\n"); + } +#endif + + if (event_data->ReasonCode == MPI2_EVENT_SAS_DISC_RC_STARTED && + !ioc->sas_hba.num_phys) + _scsih_sas_host_add(ioc); +} + +/** + * _scsih_reprobe_lun - reprobing lun + * @sdev: scsi device struct + * @no_uld_attach: sdev->no_uld_attach flag setting + * + **/ +static void +_scsih_reprobe_lun(struct scsi_device *sdev, void *no_uld_attach) +{ + int rc; + + sdev->no_uld_attach = no_uld_attach ? 1 : 0; + sdev_printk(KERN_INFO, sdev, "%s raid component\n", + sdev->no_uld_attach ? "hidding" : "exposing"); + rc = scsi_device_reprobe(sdev); +} + +/** + * _scsih_reprobe_target - reprobing target + * @starget: scsi target struct + * @no_uld_attach: sdev->no_uld_attach flag setting + * + * Note: no_uld_attach flag determines whether the disk device is attached + * to block layer. A value of `1` means to not attach. + **/ +static void +_scsih_reprobe_target(struct scsi_target *starget, int no_uld_attach) +{ + struct MPT2SAS_TARGET *sas_target_priv_data = starget->hostdata; + + if (no_uld_attach) + sas_target_priv_data->flags |= MPT_TARGET_FLAGS_RAID_COMPONENT; + else + sas_target_priv_data->flags &= ~MPT_TARGET_FLAGS_RAID_COMPONENT; + + starget_for_each_device(starget, no_uld_attach ? (void *)1 : NULL, + _scsih_reprobe_lun); +} +/** + * _scsih_sas_volume_add - add new volume + * @ioc: per adapter object + * @element: IR config element data + * Context: user. + * + * Return nothing. + */ +static void +_scsih_sas_volume_add(struct MPT2SAS_ADAPTER *ioc, + Mpi2EventIrConfigElement_t *element) +{ + struct _raid_device *raid_device; + unsigned long flags; + u64 wwid; + u16 handle = le16_to_cpu(element->VolDevHandle); + int rc; + +#if 0 /* RAID_HACKS */ + if (le32_to_cpu(event_data->Flags) & + MPI2_EVENT_IR_CHANGE_FLAGS_FOREIGN_CONFIG) + return; +#endif + + mpt2sas_config_get_volume_wwid(ioc, handle, &wwid); + if (!wwid) { + printk(MPT2SAS_ERR_FMT + "failure at %s:%d/%s()!\n", ioc->name, + __FILE__, __LINE__, __func__); + return; + } + + spin_lock_irqsave(&ioc->raid_device_lock, flags); + raid_device = _scsih_raid_device_find_by_wwid(ioc, wwid); + spin_unlock_irqrestore(&ioc->raid_device_lock, flags); + + if (raid_device) + return; + + raid_device = kzalloc(sizeof(struct _raid_device), GFP_KERNEL); + if (!raid_device) { + printk(MPT2SAS_ERR_FMT + "failure at %s:%d/%s()!\n", ioc->name, + __FILE__, __LINE__, __func__); + return; + } + + raid_device->id = ioc->sas_id++; + raid_device->channel = RAID_CHANNEL; + raid_device->handle = handle; + raid_device->wwid = wwid; + _scsih_raid_device_add(ioc, raid_device); + if (!ioc->wait_for_port_enable_to_complete) { + rc = scsi_add_device(ioc->shost, RAID_CHANNEL, + raid_device->id, 0); + if (rc) + _scsih_raid_device_remove(ioc, raid_device); + } else + _scsih_determine_boot_device(ioc, raid_device, 1); +} + +/** + * _scsih_sas_volume_delete - delete volume + * @ioc: per adapter object + * @element: IR config element data + * Context: user. + * + * Return nothing. + */ +static void +_scsih_sas_volume_delete(struct MPT2SAS_ADAPTER *ioc, + Mpi2EventIrConfigElement_t *element) +{ + struct _raid_device *raid_device; + u16 handle = le16_to_cpu(element->VolDevHandle); + unsigned long flags; + struct MPT2SAS_TARGET *sas_target_priv_data; + +#if 0 /* RAID_HACKS */ + if (le32_to_cpu(event_data->Flags) & + MPI2_EVENT_IR_CHANGE_FLAGS_FOREIGN_CONFIG) + return; +#endif + + spin_lock_irqsave(&ioc->raid_device_lock, flags); + raid_device = _scsih_raid_device_find_by_handle(ioc, handle); + spin_unlock_irqrestore(&ioc->raid_device_lock, flags); + if (!raid_device) + return; + if (raid_device->starget) { + sas_target_priv_data = raid_device->starget->hostdata; + sas_target_priv_data->deleted = 1; + scsi_remove_target(&raid_device->starget->dev); + } + _scsih_raid_device_remove(ioc, raid_device); +} + +/** + * _scsih_sas_pd_expose - expose pd component to /dev/sdX + * @ioc: per adapter object + * @element: IR config element data + * Context: user. + * + * Return nothing. + */ +static void +_scsih_sas_pd_expose(struct MPT2SAS_ADAPTER *ioc, + Mpi2EventIrConfigElement_t *element) +{ + struct _sas_device *sas_device; + unsigned long flags; + u16 handle = le16_to_cpu(element->PhysDiskDevHandle); + + spin_lock_irqsave(&ioc->sas_device_lock, flags); + sas_device = _scsih_sas_device_find_by_handle(ioc, handle); + spin_unlock_irqrestore(&ioc->sas_device_lock, flags); + if (!sas_device) + return; + + /* exposing raid component */ + sas_device->volume_handle = 0; + sas_device->volume_wwid = 0; + sas_device->hidden_raid_component = 0; + _scsih_reprobe_target(sas_device->starget, 0); +} + +/** + * _scsih_sas_pd_hide - hide pd component from /dev/sdX + * @ioc: per adapter object + * @element: IR config element data + * Context: user. + * + * Return nothing. + */ +static void +_scsih_sas_pd_hide(struct MPT2SAS_ADAPTER *ioc, + Mpi2EventIrConfigElement_t *element) +{ + struct _sas_device *sas_device; + unsigned long flags; + u16 handle = le16_to_cpu(element->PhysDiskDevHandle); + + spin_lock_irqsave(&ioc->sas_device_lock, flags); + sas_device = _scsih_sas_device_find_by_handle(ioc, handle); + spin_unlock_irqrestore(&ioc->sas_device_lock, flags); + if (!sas_device) + return; + + /* hiding raid component */ + mpt2sas_config_get_volume_handle(ioc, handle, + &sas_device->volume_handle); + mpt2sas_config_get_volume_wwid(ioc, sas_device->volume_handle, + &sas_device->volume_wwid); + sas_device->hidden_raid_component = 1; + _scsih_reprobe_target(sas_device->starget, 1); +} + +/** + * _scsih_sas_pd_delete - delete pd component + * @ioc: per adapter object + * @element: IR config element data + * Context: user. + * + * Return nothing. + */ +static void +_scsih_sas_pd_delete(struct MPT2SAS_ADAPTER *ioc, + Mpi2EventIrConfigElement_t *element) +{ + struct _sas_device *sas_device; + unsigned long flags; + u16 handle = le16_to_cpu(element->PhysDiskDevHandle); + + spin_lock_irqsave(&ioc->sas_device_lock, flags); + sas_device = _scsih_sas_device_find_by_handle(ioc, handle); + spin_unlock_irqrestore(&ioc->sas_device_lock, flags); + if (!sas_device) + return; + _scsih_remove_device(ioc, handle); +} + +/** + * _scsih_sas_pd_add - remove pd component + * @ioc: per adapter object + * @element: IR config element data + * Context: user. + * + * Return nothing. + */ +static void +_scsih_sas_pd_add(struct MPT2SAS_ADAPTER *ioc, + Mpi2EventIrConfigElement_t *element) +{ + struct _sas_device *sas_device; + unsigned long flags; + u16 handle = le16_to_cpu(element->PhysDiskDevHandle); + + spin_lock_irqsave(&ioc->sas_device_lock, flags); + sas_device = _scsih_sas_device_find_by_handle(ioc, handle); + spin_unlock_irqrestore(&ioc->sas_device_lock, flags); + if (sas_device) + sas_device->hidden_raid_component = 1; + else + _scsih_add_device(ioc, handle, 0, 1); +} + +#ifdef CONFIG_SCSI_MPT2SAS_LOGGING +/** + * _scsih_sas_ir_config_change_event_debug - debug for IR Config Change events + * @ioc: per adapter object + * @event_data: event data payload + * Context: user. + * + * Return nothing. + */ +static void +_scsih_sas_ir_config_change_event_debug(struct MPT2SAS_ADAPTER *ioc, + Mpi2EventDataIrConfigChangeList_t *event_data) +{ + Mpi2EventIrConfigElement_t *element; + u8 element_type; + int i; + char *reason_str = NULL, *element_str = NULL; + + element = (Mpi2EventIrConfigElement_t *)&event_data->ConfigElement[0]; + + printk(MPT2SAS_DEBUG_FMT "raid config change: (%s), elements(%d)\n", + ioc->name, (le32_to_cpu(event_data->Flags) & + MPI2_EVENT_IR_CHANGE_FLAGS_FOREIGN_CONFIG) ? + "foreign" : "native", event_data->NumElements); + for (i = 0; i < event_data->NumElements; i++, element++) { + switch (element->ReasonCode) { + case MPI2_EVENT_IR_CHANGE_RC_ADDED: + reason_str = "add"; + break; + case MPI2_EVENT_IR_CHANGE_RC_REMOVED: + reason_str = "remove"; + break; + case MPI2_EVENT_IR_CHANGE_RC_NO_CHANGE: + reason_str = "no change"; + break; + case MPI2_EVENT_IR_CHANGE_RC_HIDE: + reason_str = "hide"; + break; + case MPI2_EVENT_IR_CHANGE_RC_UNHIDE: + reason_str = "unhide"; + break; + case MPI2_EVENT_IR_CHANGE_RC_VOLUME_CREATED: + reason_str = "volume_created"; + break; + case MPI2_EVENT_IR_CHANGE_RC_VOLUME_DELETED: + reason_str = "volume_deleted"; + break; + case MPI2_EVENT_IR_CHANGE_RC_PD_CREATED: + reason_str = "pd_created"; + break; + case MPI2_EVENT_IR_CHANGE_RC_PD_DELETED: + reason_str = "pd_deleted"; + break; + default: + reason_str = "unknown reason"; + break; + } + element_type = le16_to_cpu(element->ElementFlags) & + MPI2_EVENT_IR_CHANGE_EFLAGS_ELEMENT_TYPE_MASK; + switch (element_type) { + case MPI2_EVENT_IR_CHANGE_EFLAGS_VOLUME_ELEMENT: + element_str = "volume"; + break; + case MPI2_EVENT_IR_CHANGE_EFLAGS_VOLPHYSDISK_ELEMENT: + element_str = "phys disk"; + break; + case MPI2_EVENT_IR_CHANGE_EFLAGS_HOTSPARE_ELEMENT: + element_str = "hot spare"; + break; + default: + element_str = "unknown element"; + break; + } + printk(KERN_DEBUG "\t(%s:%s), vol handle(0x%04x), " + "pd handle(0x%04x), pd num(0x%02x)\n", element_str, + reason_str, le16_to_cpu(element->VolDevHandle), + le16_to_cpu(element->PhysDiskDevHandle), + element->PhysDiskNum); + } +} +#endif + +/** + * _scsih_sas_ir_config_change_event - handle ir configuration change events + * @ioc: per adapter object + * @VF_ID: + * @event_data: event data payload + * Context: user. + * + * Return nothing. + */ +static void +_scsih_sas_ir_config_change_event(struct MPT2SAS_ADAPTER *ioc, u8 VF_ID, + Mpi2EventDataIrConfigChangeList_t *event_data) +{ + Mpi2EventIrConfigElement_t *element; + int i; + +#ifdef CONFIG_SCSI_MPT2SAS_LOGGING + if (ioc->logging_level & MPT_DEBUG_EVENT_WORK_TASK) + _scsih_sas_ir_config_change_event_debug(ioc, event_data); + +#endif + + element = (Mpi2EventIrConfigElement_t *)&event_data->ConfigElement[0]; + for (i = 0; i < event_data->NumElements; i++, element++) { + + switch (element->ReasonCode) { + case MPI2_EVENT_IR_CHANGE_RC_VOLUME_CREATED: + case MPI2_EVENT_IR_CHANGE_RC_ADDED: + _scsih_sas_volume_add(ioc, element); + break; + case MPI2_EVENT_IR_CHANGE_RC_VOLUME_DELETED: + case MPI2_EVENT_IR_CHANGE_RC_REMOVED: + _scsih_sas_volume_delete(ioc, element); + break; + case MPI2_EVENT_IR_CHANGE_RC_PD_CREATED: + _scsih_sas_pd_hide(ioc, element); + break; + case MPI2_EVENT_IR_CHANGE_RC_PD_DELETED: + _scsih_sas_pd_expose(ioc, element); + break; + case MPI2_EVENT_IR_CHANGE_RC_HIDE: + _scsih_sas_pd_add(ioc, element); + break; + case MPI2_EVENT_IR_CHANGE_RC_UNHIDE: + _scsih_sas_pd_delete(ioc, element); + break; + } + } +} + +/** + * _scsih_sas_ir_volume_event - IR volume event + * @ioc: per adapter object + * @event_data: event data payload + * Context: user. + * + * Return nothing. + */ +static void +_scsih_sas_ir_volume_event(struct MPT2SAS_ADAPTER *ioc, u8 VF_ID, + Mpi2EventDataIrVolume_t *event_data) +{ + u64 wwid; + unsigned long flags; + struct _raid_device *raid_device; + u16 handle; + u32 state; + int rc; + struct MPT2SAS_TARGET *sas_target_priv_data; + + if (event_data->ReasonCode != MPI2_EVENT_IR_VOLUME_RC_STATE_CHANGED) + return; + + handle = le16_to_cpu(event_data->VolDevHandle); + state = le32_to_cpu(event_data->NewValue); + dewtprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s: handle(0x%04x), " + "old(0x%08x), new(0x%08x)\n", ioc->name, __func__, handle, + le32_to_cpu(event_data->PreviousValue), state)); + + spin_lock_irqsave(&ioc->raid_device_lock, flags); + raid_device = _scsih_raid_device_find_by_handle(ioc, handle); + spin_unlock_irqrestore(&ioc->raid_device_lock, flags); + + switch (state) { + case MPI2_RAID_VOL_STATE_MISSING: + case MPI2_RAID_VOL_STATE_FAILED: + if (!raid_device) + break; + if (raid_device->starget) { + sas_target_priv_data = raid_device->starget->hostdata; + sas_target_priv_data->deleted = 1; + scsi_remove_target(&raid_device->starget->dev); + } + _scsih_raid_device_remove(ioc, raid_device); + break; + + case MPI2_RAID_VOL_STATE_ONLINE: + case MPI2_RAID_VOL_STATE_DEGRADED: + case MPI2_RAID_VOL_STATE_OPTIMAL: + if (raid_device) + break; + + mpt2sas_config_get_volume_wwid(ioc, handle, &wwid); + if (!wwid) { + printk(MPT2SAS_ERR_FMT + "failure at %s:%d/%s()!\n", ioc->name, + __FILE__, __LINE__, __func__); + break; + } + + raid_device = kzalloc(sizeof(struct _raid_device), GFP_KERNEL); + if (!raid_device) { + printk(MPT2SAS_ERR_FMT + "failure at %s:%d/%s()!\n", ioc->name, + __FILE__, __LINE__, __func__); + break; + } + + raid_device->id = ioc->sas_id++; + raid_device->channel = RAID_CHANNEL; + raid_device->handle = handle; + raid_device->wwid = wwid; + _scsih_raid_device_add(ioc, raid_device); + rc = scsi_add_device(ioc->shost, RAID_CHANNEL, + raid_device->id, 0); + if (rc) + _scsih_raid_device_remove(ioc, raid_device); + break; + + case MPI2_RAID_VOL_STATE_INITIALIZING: + default: + break; + } +} + +/** + * _scsih_sas_ir_physical_disk_event - PD event + * @ioc: per adapter object + * @event_data: event data payload + * Context: user. + * + * Return nothing. + */ +static void +_scsih_sas_ir_physical_disk_event(struct MPT2SAS_ADAPTER *ioc, u8 VF_ID, + Mpi2EventDataIrPhysicalDisk_t *event_data) +{ + u16 handle; + u32 state; + struct _sas_device *sas_device; + unsigned long flags; + + if (event_data->ReasonCode != MPI2_EVENT_IR_PHYSDISK_RC_STATE_CHANGED) + return; + + handle = le16_to_cpu(event_data->PhysDiskDevHandle); + state = le32_to_cpu(event_data->NewValue); + + dewtprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s: handle(0x%04x), " + "old(0x%08x), new(0x%08x)\n", ioc->name, __func__, handle, + le32_to_cpu(event_data->PreviousValue), state)); + + spin_lock_irqsave(&ioc->sas_device_lock, flags); + sas_device = _scsih_sas_device_find_by_handle(ioc, handle); + spin_unlock_irqrestore(&ioc->sas_device_lock, flags); + + switch (state) { +#if 0 + case MPI2_RAID_PD_STATE_OFFLINE: + if (sas_device) + _scsih_remove_device(ioc, handle); + break; +#endif + case MPI2_RAID_PD_STATE_ONLINE: + case MPI2_RAID_PD_STATE_DEGRADED: + case MPI2_RAID_PD_STATE_REBUILDING: + case MPI2_RAID_PD_STATE_OPTIMAL: + if (sas_device) + sas_device->hidden_raid_component = 1; + else + _scsih_add_device(ioc, handle, 0, 1); + break; + + case MPI2_RAID_PD_STATE_NOT_CONFIGURED: + case MPI2_RAID_PD_STATE_NOT_COMPATIBLE: + case MPI2_RAID_PD_STATE_HOT_SPARE: + default: + break; + } +} + +#ifdef CONFIG_SCSI_MPT2SAS_LOGGING +/** + * _scsih_sas_ir_operation_status_event_debug - debug for IR op event + * @ioc: per adapter object + * @event_data: event data payload + * Context: user. + * + * Return nothing. + */ +static void +_scsih_sas_ir_operation_status_event_debug(struct MPT2SAS_ADAPTER *ioc, + Mpi2EventDataIrOperationStatus_t *event_data) +{ + char *reason_str = NULL; + + switch (event_data->RAIDOperation) { + case MPI2_EVENT_IR_RAIDOP_RESYNC: + reason_str = "resync"; + break; + case MPI2_EVENT_IR_RAIDOP_ONLINE_CAP_EXPANSION: + reason_str = "online capacity expansion"; + break; + case MPI2_EVENT_IR_RAIDOP_CONSISTENCY_CHECK: + reason_str = "consistency check"; + break; + default: + reason_str = "unknown reason"; + break; + } + + printk(MPT2SAS_INFO_FMT "raid operational status: (%s)" + "\thandle(0x%04x), percent complete(%d)\n", + ioc->name, reason_str, + le16_to_cpu(event_data->VolDevHandle), + event_data->PercentComplete); +} +#endif + +/** + * _scsih_sas_ir_operation_status_event - handle RAID operation events + * @ioc: per adapter object + * @VF_ID: + * @event_data: event data payload + * Context: user. + * + * Return nothing. + */ +static void +_scsih_sas_ir_operation_status_event(struct MPT2SAS_ADAPTER *ioc, u8 VF_ID, + Mpi2EventDataIrOperationStatus_t *event_data) +{ +#ifdef CONFIG_SCSI_MPT2SAS_LOGGING + if (ioc->logging_level & MPT_DEBUG_EVENT_WORK_TASK) + _scsih_sas_ir_operation_status_event_debug(ioc, event_data); +#endif +} + +/** + * _scsih_task_set_full - handle task set full + * @ioc: per adapter object + * @event_data: event data payload + * Context: user. + * + * Throttle back qdepth. + */ +static void +_scsih_task_set_full(struct MPT2SAS_ADAPTER *ioc, u8 VF_ID, + Mpi2EventDataTaskSetFull_t *event_data) +{ + unsigned long flags; + struct _sas_device *sas_device; + static struct _raid_device *raid_device; + struct scsi_device *sdev; + int depth; + u16 current_depth; + u16 handle; + int id, channel; + u64 sas_address; + + current_depth = le16_to_cpu(event_data->CurrentDepth); + handle = le16_to_cpu(event_data->DevHandle); + spin_lock_irqsave(&ioc->sas_device_lock, flags); + sas_device = _scsih_sas_device_find_by_handle(ioc, handle); + if (!sas_device) { + spin_unlock_irqrestore(&ioc->sas_device_lock, flags); + return; + } + spin_unlock_irqrestore(&ioc->sas_device_lock, flags); + id = sas_device->id; + channel = sas_device->channel; + sas_address = sas_device->sas_address; + + /* if hidden raid component, then change to volume characteristics */ + if (sas_device->hidden_raid_component && sas_device->volume_handle) { + spin_lock_irqsave(&ioc->raid_device_lock, flags); + raid_device = _scsih_raid_device_find_by_handle( + ioc, sas_device->volume_handle); + spin_unlock_irqrestore(&ioc->raid_device_lock, flags); + if (raid_device) { + id = raid_device->id; + channel = raid_device->channel; + handle = raid_device->handle; + sas_address = raid_device->wwid; + } + } + + if (ioc->logging_level & MPT_DEBUG_TASK_SET_FULL) + starget_printk(KERN_DEBUG, sas_device->starget, "task set " + "full: handle(0x%04x), sas_addr(0x%016llx), depth(%d)\n", + handle, (unsigned long long)sas_address, current_depth); + + shost_for_each_device(sdev, ioc->shost) { + if (sdev->id == id && sdev->channel == channel) { + if (current_depth > sdev->queue_depth) { + if (ioc->logging_level & + MPT_DEBUG_TASK_SET_FULL) + sdev_printk(KERN_INFO, sdev, "strange " + "observation, the queue depth is" + " (%d) meanwhile fw queue depth " + "is (%d)\n", sdev->queue_depth, + current_depth); + continue; + } + depth = scsi_track_queue_full(sdev, + current_depth - 1); + if (depth > 0) + sdev_printk(KERN_INFO, sdev, "Queue depth " + "reduced to (%d)\n", depth); + else if (depth < 0) + sdev_printk(KERN_INFO, sdev, "Tagged Command " + "Queueing is being disabled\n"); + else if (depth == 0) + if (ioc->logging_level & + MPT_DEBUG_TASK_SET_FULL) + sdev_printk(KERN_INFO, sdev, + "Queue depth not changed yet\n"); + } + } +} + +/** + * _scsih_mark_responding_sas_device - mark a sas_devices as responding + * @ioc: per adapter object + * @sas_address: sas address + * @slot: enclosure slot id + * @handle: device handle + * + * After host reset, find out whether devices are still responding. + * Used in _scsi_remove_unresponsive_sas_devices. + * + * Return nothing. + */ +static void +_scsih_mark_responding_sas_device(struct MPT2SAS_ADAPTER *ioc, u64 sas_address, + u16 slot, u16 handle) +{ + struct MPT2SAS_TARGET *sas_target_priv_data; + struct scsi_target *starget; + struct _sas_device *sas_device; + unsigned long flags; + + spin_lock_irqsave(&ioc->sas_device_lock, flags); + list_for_each_entry(sas_device, &ioc->sas_device_list, list) { + if (sas_device->sas_address == sas_address && + sas_device->slot == slot && sas_device->starget) { + sas_device->responding = 1; + starget_printk(KERN_INFO, sas_device->starget, + "handle(0x%04x), sas_addr(0x%016llx), enclosure " + "logical id(0x%016llx), slot(%d)\n", handle, + (unsigned long long)sas_device->sas_address, + (unsigned long long) + sas_device->enclosure_logical_id, + sas_device->slot); + if (sas_device->handle == handle) + goto out; + printk(KERN_INFO "\thandle changed from(0x%04x)!!!\n", + sas_device->handle); + sas_device->handle = handle; + starget = sas_device->starget; + sas_target_priv_data = starget->hostdata; + sas_target_priv_data->handle = handle; + goto out; + } + } + out: + spin_unlock_irqrestore(&ioc->sas_device_lock, flags); +} + +/** + * _scsih_search_responding_sas_devices - + * @ioc: per adapter object + * + * After host reset, find out whether devices are still responding. + * If not remove. + * + * Return nothing. + */ +static void +_scsih_search_responding_sas_devices(struct MPT2SAS_ADAPTER *ioc) +{ + Mpi2SasDevicePage0_t sas_device_pg0; + Mpi2ConfigReply_t mpi_reply; + u16 ioc_status; + __le64 sas_address; + u16 handle; + u32 device_info; + u16 slot; + + printk(MPT2SAS_INFO_FMT "%s\n", ioc->name, __func__); + + if (list_empty(&ioc->sas_device_list)) + return; + + handle = 0xFFFF; + while (!(mpt2sas_config_get_sas_device_pg0(ioc, &mpi_reply, + &sas_device_pg0, MPI2_SAS_DEVICE_PGAD_FORM_GET_NEXT_HANDLE, + handle))) { + ioc_status = le16_to_cpu(mpi_reply.IOCStatus) & + MPI2_IOCSTATUS_MASK; + if (ioc_status == MPI2_IOCSTATUS_CONFIG_INVALID_PAGE) + break; + handle = le16_to_cpu(sas_device_pg0.DevHandle); + device_info = le32_to_cpu(sas_device_pg0.DeviceInfo); + if (!(_scsih_is_end_device(device_info))) + continue; + sas_address = le64_to_cpu(sas_device_pg0.SASAddress); + slot = le16_to_cpu(sas_device_pg0.Slot); + _scsih_mark_responding_sas_device(ioc, sas_address, slot, + handle); + } +} + +/** + * _scsih_mark_responding_raid_device - mark a raid_device as responding + * @ioc: per adapter object + * @wwid: world wide identifier for raid volume + * @handle: device handle + * + * After host reset, find out whether devices are still responding. + * Used in _scsi_remove_unresponsive_raid_devices. + * + * Return nothing. + */ +static void +_scsih_mark_responding_raid_device(struct MPT2SAS_ADAPTER *ioc, u64 wwid, + u16 handle) +{ + struct MPT2SAS_TARGET *sas_target_priv_data; + struct scsi_target *starget; + struct _raid_device *raid_device; + unsigned long flags; + + spin_lock_irqsave(&ioc->raid_device_lock, flags); + list_for_each_entry(raid_device, &ioc->raid_device_list, list) { + if (raid_device->wwid == wwid && raid_device->starget) { + raid_device->responding = 1; + starget_printk(KERN_INFO, raid_device->starget, + "handle(0x%04x), wwid(0x%016llx)\n", handle, + (unsigned long long)raid_device->wwid); + if (raid_device->handle == handle) + goto out; + printk(KERN_INFO "\thandle changed from(0x%04x)!!!\n", + raid_device->handle); + raid_device->handle = handle; + starget = raid_device->starget; + sas_target_priv_data = starget->hostdata; + sas_target_priv_data->handle = handle; + goto out; + } + } + out: + spin_unlock_irqrestore(&ioc->raid_device_lock, flags); +} + +/** + * _scsih_search_responding_raid_devices - + * @ioc: per adapter object + * + * After host reset, find out whether devices are still responding. + * If not remove. + * + * Return nothing. + */ +static void +_scsih_search_responding_raid_devices(struct MPT2SAS_ADAPTER *ioc) +{ + Mpi2RaidVolPage1_t volume_pg1; + Mpi2ConfigReply_t mpi_reply; + u16 ioc_status; + u16 handle; + + printk(MPT2SAS_INFO_FMT "%s\n", ioc->name, __func__); + + if (list_empty(&ioc->raid_device_list)) + return; + + handle = 0xFFFF; + while (!(mpt2sas_config_get_raid_volume_pg1(ioc, &mpi_reply, + &volume_pg1, MPI2_RAID_VOLUME_PGAD_FORM_GET_NEXT_HANDLE, handle))) { + ioc_status = le16_to_cpu(mpi_reply.IOCStatus) & + MPI2_IOCSTATUS_MASK; + if (ioc_status == MPI2_IOCSTATUS_CONFIG_INVALID_PAGE) + break; + handle = le16_to_cpu(volume_pg1.DevHandle); + _scsih_mark_responding_raid_device(ioc, + le64_to_cpu(volume_pg1.WWID), handle); + } +} + +/** + * _scsih_mark_responding_expander - mark a expander as responding + * @ioc: per adapter object + * @sas_address: sas address + * @handle: + * + * After host reset, find out whether devices are still responding. + * Used in _scsi_remove_unresponsive_expanders. + * + * Return nothing. + */ +static void +_scsih_mark_responding_expander(struct MPT2SAS_ADAPTER *ioc, u64 sas_address, + u16 handle) +{ + struct _sas_node *sas_expander; + unsigned long flags; + + spin_lock_irqsave(&ioc->sas_node_lock, flags); + list_for_each_entry(sas_expander, &ioc->sas_expander_list, list) { + if (sas_expander->sas_address == sas_address) { + sas_expander->responding = 1; + if (sas_expander->handle != handle) { + printk(KERN_INFO "old handle(0x%04x)\n", + sas_expander->handle); + sas_expander->handle = handle; + } + goto out; + } + } + out: + spin_unlock_irqrestore(&ioc->sas_node_lock, flags); +} + +/** + * _scsih_search_responding_expanders - + * @ioc: per adapter object + * + * After host reset, find out whether devices are still responding. + * If not remove. + * + * Return nothing. + */ +static void +_scsih_search_responding_expanders(struct MPT2SAS_ADAPTER *ioc) +{ + Mpi2ExpanderPage0_t expander_pg0; + Mpi2ConfigReply_t mpi_reply; + u16 ioc_status; + __le64 sas_address; + u16 handle; + + printk(MPT2SAS_INFO_FMT "%s\n", ioc->name, __func__); + + if (list_empty(&ioc->sas_expander_list)) + return; + + handle = 0xFFFF; + while (!(mpt2sas_config_get_expander_pg0(ioc, &mpi_reply, &expander_pg0, + MPI2_SAS_EXPAND_PGAD_FORM_GET_NEXT_HNDL, handle))) { + + ioc_status = le16_to_cpu(mpi_reply.IOCStatus) & + MPI2_IOCSTATUS_MASK; + if (ioc_status == MPI2_IOCSTATUS_CONFIG_INVALID_PAGE) + break; + + handle = le16_to_cpu(expander_pg0.DevHandle); + sas_address = le64_to_cpu(expander_pg0.SASAddress); + printk(KERN_INFO "\texpander present: handle(0x%04x), " + "sas_addr(0x%016llx)\n", handle, + (unsigned long long)sas_address); + _scsih_mark_responding_expander(ioc, sas_address, handle); + } + +} + +/** + * _scsih_remove_unresponding_devices - removing unresponding devices + * @ioc: per adapter object + * + * Return nothing. + */ +static void +_scsih_remove_unresponding_devices(struct MPT2SAS_ADAPTER *ioc) +{ + struct _sas_device *sas_device, *sas_device_next; + struct _sas_node *sas_expander, *sas_expander_next; + struct _raid_device *raid_device, *raid_device_next; + unsigned long flags; + + _scsih_search_responding_sas_devices(ioc); + _scsih_search_responding_raid_devices(ioc); + _scsih_search_responding_expanders(ioc); + + spin_lock_irqsave(&ioc->ioc_reset_in_progress_lock, flags); + ioc->shost_recovery = 0; + if (ioc->shost->shost_state == SHOST_RECOVERY) { + printk(MPT2SAS_INFO_FMT "putting controller into " + "SHOST_RUNNING\n", ioc->name); + scsi_host_set_state(ioc->shost, SHOST_RUNNING); + } + spin_unlock_irqrestore(&ioc->ioc_reset_in_progress_lock, flags); + + list_for_each_entry_safe(sas_device, sas_device_next, + &ioc->sas_device_list, list) { + if (sas_device->responding) { + sas_device->responding = 0; + continue; + } + if (sas_device->starget) + starget_printk(KERN_INFO, sas_device->starget, + "removing: handle(0x%04x), sas_addr(0x%016llx), " + "enclosure logical id(0x%016llx), slot(%d)\n", + sas_device->handle, + (unsigned long long)sas_device->sas_address, + (unsigned long long) + sas_device->enclosure_logical_id, + sas_device->slot); + _scsih_remove_device(ioc, sas_device->handle); + } + + list_for_each_entry_safe(raid_device, raid_device_next, + &ioc->raid_device_list, list) { + if (raid_device->responding) { + raid_device->responding = 0; + continue; + } + if (raid_device->starget) { + starget_printk(KERN_INFO, raid_device->starget, + "removing: handle(0x%04x), wwid(0x%016llx)\n", + raid_device->handle, + (unsigned long long)raid_device->wwid); + scsi_remove_target(&raid_device->starget->dev); + } + _scsih_raid_device_remove(ioc, raid_device); + } + + list_for_each_entry_safe(sas_expander, sas_expander_next, + &ioc->sas_expander_list, list) { + if (sas_expander->responding) { + sas_expander->responding = 0; + continue; + } + printk("\tremoving expander: handle(0x%04x), " + " sas_addr(0x%016llx)\n", sas_expander->handle, + (unsigned long long)sas_expander->sas_address); + _scsih_expander_remove(ioc, sas_expander->handle); + } +} + +/** + * _firmware_event_work - delayed task for processing firmware events + * @ioc: per adapter object + * @work: equal to the fw_event_work object + * Context: user. + * + * Return nothing. + */ +static void +_firmware_event_work(struct work_struct *work) +{ + struct fw_event_work *fw_event = container_of(work, + struct fw_event_work, work.work); + unsigned long flags; + struct MPT2SAS_ADAPTER *ioc = fw_event->ioc; + + /* This is invoked by calling _scsih_queue_rescan(). */ + if (fw_event->event == MPT2SAS_RESCAN_AFTER_HOST_RESET) { + _scsih_fw_event_free(ioc, fw_event); + _scsih_sas_host_refresh(ioc, 1); + _scsih_remove_unresponding_devices(ioc); + return; + } + + /* the queue is being flushed so ignore this event */ + spin_lock_irqsave(&ioc->fw_event_lock, flags); + if (ioc->fw_events_off || ioc->remove_host) { + spin_unlock_irqrestore(&ioc->fw_event_lock, flags); + _scsih_fw_event_free(ioc, fw_event); + return; + } + spin_unlock_irqrestore(&ioc->fw_event_lock, flags); + + spin_lock_irqsave(&ioc->ioc_reset_in_progress_lock, flags); + if (ioc->shost_recovery) { + spin_unlock_irqrestore(&ioc->ioc_reset_in_progress_lock, flags); + _scsih_fw_event_requeue(ioc, fw_event, 1000); + return; + } + spin_unlock_irqrestore(&ioc->ioc_reset_in_progress_lock, flags); + + switch (fw_event->event) { + case MPI2_EVENT_SAS_TOPOLOGY_CHANGE_LIST: + _scsih_sas_topology_change_event(ioc, fw_event->VF_ID, + fw_event->event_data, fw_event); + break; + case MPI2_EVENT_SAS_DEVICE_STATUS_CHANGE: + _scsih_sas_device_status_change_event(ioc, fw_event->VF_ID, + fw_event->event_data); + break; + case MPI2_EVENT_SAS_DISCOVERY: + _scsih_sas_discovery_event(ioc, fw_event->VF_ID, + fw_event->event_data); + break; + case MPI2_EVENT_SAS_BROADCAST_PRIMITIVE: + _scsih_sas_broadcast_primative_event(ioc, fw_event->VF_ID, + fw_event->event_data); + break; + case MPI2_EVENT_SAS_ENCL_DEVICE_STATUS_CHANGE: + _scsih_sas_enclosure_dev_status_change_event(ioc, + fw_event->VF_ID, fw_event->event_data); + break; + case MPI2_EVENT_IR_CONFIGURATION_CHANGE_LIST: + _scsih_sas_ir_config_change_event(ioc, fw_event->VF_ID, + fw_event->event_data); + break; + case MPI2_EVENT_IR_VOLUME: + _scsih_sas_ir_volume_event(ioc, fw_event->VF_ID, + fw_event->event_data); + break; + case MPI2_EVENT_IR_PHYSICAL_DISK: + _scsih_sas_ir_physical_disk_event(ioc, fw_event->VF_ID, + fw_event->event_data); + break; + case MPI2_EVENT_IR_OPERATION_STATUS: + _scsih_sas_ir_operation_status_event(ioc, fw_event->VF_ID, + fw_event->event_data); + break; + case MPI2_EVENT_TASK_SET_FULL: + _scsih_task_set_full(ioc, fw_event->VF_ID, + fw_event->event_data); + break; + } + _scsih_fw_event_free(ioc, fw_event); +} + +/** + * mpt2sas_scsih_event_callback - firmware event handler (called at ISR time) + * @ioc: per adapter object + * @VF_ID: virtual function id + * @reply: reply message frame(lower 32bit addr) + * Context: interrupt. + * + * This function merely adds a new work task into ioc->firmware_event_thread. + * The tasks are worked from _firmware_event_work in user context. + * + * Return nothing. + */ +void +mpt2sas_scsih_event_callback(struct MPT2SAS_ADAPTER *ioc, u8 VF_ID, u32 reply) +{ + struct fw_event_work *fw_event; + Mpi2EventNotificationReply_t *mpi_reply; + unsigned long flags; + u16 event; + + /* events turned off due to host reset or driver unloading */ + spin_lock_irqsave(&ioc->fw_event_lock, flags); + if (ioc->fw_events_off || ioc->remove_host) { + spin_unlock_irqrestore(&ioc->fw_event_lock, flags); + return; + } + spin_unlock_irqrestore(&ioc->fw_event_lock, flags); + + mpi_reply = mpt2sas_base_get_reply_virt_addr(ioc, reply); + event = le16_to_cpu(mpi_reply->Event); + + switch (event) { + /* handle these */ + case MPI2_EVENT_SAS_BROADCAST_PRIMITIVE: + { + Mpi2EventDataSasBroadcastPrimitive_t *baen_data = + (Mpi2EventDataSasBroadcastPrimitive_t *) + mpi_reply->EventData; + + if (baen_data->Primitive != + MPI2_EVENT_PRIMITIVE_ASYNCHRONOUS_EVENT || + ioc->broadcast_aen_busy) + return; + ioc->broadcast_aen_busy = 1; + break; + } + + case MPI2_EVENT_SAS_TOPOLOGY_CHANGE_LIST: + _scsih_check_topo_delete_events(ioc, + (Mpi2EventDataSasTopologyChangeList_t *) + mpi_reply->EventData); + break; + + case MPI2_EVENT_SAS_DEVICE_STATUS_CHANGE: + case MPI2_EVENT_IR_OPERATION_STATUS: + case MPI2_EVENT_SAS_DISCOVERY: + case MPI2_EVENT_SAS_ENCL_DEVICE_STATUS_CHANGE: + case MPI2_EVENT_IR_VOLUME: + case MPI2_EVENT_IR_PHYSICAL_DISK: + case MPI2_EVENT_IR_CONFIGURATION_CHANGE_LIST: + case MPI2_EVENT_TASK_SET_FULL: + break; + + default: /* ignore the rest */ + return; + } + + fw_event = kzalloc(sizeof(struct fw_event_work), GFP_ATOMIC); + if (!fw_event) { + printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", + ioc->name, __FILE__, __LINE__, __func__); + return; + } + fw_event->event_data = + kzalloc(mpi_reply->EventDataLength*4, GFP_ATOMIC); + if (!fw_event->event_data) { + printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", + ioc->name, __FILE__, __LINE__, __func__); + kfree(fw_event); + return; + } + + memcpy(fw_event->event_data, mpi_reply->EventData, + mpi_reply->EventDataLength*4); + fw_event->ioc = ioc; + fw_event->VF_ID = VF_ID; + fw_event->event = event; + _scsih_fw_event_add(ioc, fw_event); +} + +/* shost template */ +static struct scsi_host_template scsih_driver_template = { + .module = THIS_MODULE, + .name = "Fusion MPT SAS Host", + .proc_name = MPT2SAS_DRIVER_NAME, + .queuecommand = scsih_qcmd, + .target_alloc = scsih_target_alloc, + .slave_alloc = scsih_slave_alloc, + .slave_configure = scsih_slave_configure, + .target_destroy = scsih_target_destroy, + .slave_destroy = scsih_slave_destroy, + .change_queue_depth = scsih_change_queue_depth, + .change_queue_type = scsih_change_queue_type, + .eh_abort_handler = scsih_abort, + .eh_device_reset_handler = scsih_dev_reset, + .eh_host_reset_handler = scsih_host_reset, + .bios_param = scsih_bios_param, + .can_queue = 1, + .this_id = -1, + .sg_tablesize = MPT2SAS_SG_DEPTH, + .max_sectors = 8192, + .cmd_per_lun = 7, + .use_clustering = ENABLE_CLUSTERING, + .shost_attrs = mpt2sas_host_attrs, + .sdev_attrs = mpt2sas_dev_attrs, +}; + +/** + * _scsih_expander_node_remove - removing expander device from list. + * @ioc: per adapter object + * @sas_expander: the sas_device object + * Context: Calling function should acquire ioc->sas_node_lock. + * + * Removing object and freeing associated memory from the + * ioc->sas_expander_list. + * + * Return nothing. + */ +static void +_scsih_expander_node_remove(struct MPT2SAS_ADAPTER *ioc, + struct _sas_node *sas_expander) +{ + struct _sas_port *mpt2sas_port; + struct _sas_device *sas_device; + struct _sas_node *expander_sibling; + unsigned long flags; + + if (!sas_expander) + return; + + /* remove sibling ports attached to this expander */ + retry_device_search: + list_for_each_entry(mpt2sas_port, + &sas_expander->sas_port_list, port_list) { + if (mpt2sas_port->remote_identify.device_type == + SAS_END_DEVICE) { + spin_lock_irqsave(&ioc->sas_device_lock, flags); + sas_device = + mpt2sas_scsih_sas_device_find_by_sas_address(ioc, + mpt2sas_port->remote_identify.sas_address); + spin_unlock_irqrestore(&ioc->sas_device_lock, flags); + if (!sas_device) + continue; + _scsih_remove_device(ioc, sas_device->handle); + goto retry_device_search; + } + } + + retry_expander_search: + list_for_each_entry(mpt2sas_port, + &sas_expander->sas_port_list, port_list) { + + if (mpt2sas_port->remote_identify.device_type == + MPI2_SAS_DEVICE_INFO_EDGE_EXPANDER || + mpt2sas_port->remote_identify.device_type == + MPI2_SAS_DEVICE_INFO_FANOUT_EXPANDER) { + + spin_lock_irqsave(&ioc->sas_node_lock, flags); + expander_sibling = + mpt2sas_scsih_expander_find_by_sas_address( + ioc, mpt2sas_port->remote_identify.sas_address); + spin_unlock_irqrestore(&ioc->sas_node_lock, flags); + if (!expander_sibling) + continue; + _scsih_expander_remove(ioc, expander_sibling->handle); + goto retry_expander_search; + } + } + + mpt2sas_transport_port_remove(ioc, sas_expander->sas_address, + sas_expander->parent_handle); + + printk(MPT2SAS_INFO_FMT "expander_remove: handle" + "(0x%04x), sas_addr(0x%016llx)\n", ioc->name, + sas_expander->handle, (unsigned long long) + sas_expander->sas_address); + + list_del(&sas_expander->list); + kfree(sas_expander->phy); + kfree(sas_expander); +} + +/** + * scsih_remove - detach and remove add host + * @pdev: PCI device struct + * + * Return nothing. + */ +static void __devexit +scsih_remove(struct pci_dev *pdev) +{ + struct Scsi_Host *shost = pci_get_drvdata(pdev); + struct MPT2SAS_ADAPTER *ioc = shost_priv(shost); + struct _sas_port *mpt2sas_port; + struct _sas_device *sas_device; + struct _sas_node *expander_sibling; + struct workqueue_struct *wq; + unsigned long flags; + + ioc->remove_host = 1; + _scsih_fw_event_off(ioc); + + spin_lock_irqsave(&ioc->fw_event_lock, flags); + wq = ioc->firmware_event_thread; + ioc->firmware_event_thread = NULL; + spin_unlock_irqrestore(&ioc->fw_event_lock, flags); + if (wq) + destroy_workqueue(wq); + + /* free ports attached to the sas_host */ + retry_again: + list_for_each_entry(mpt2sas_port, + &ioc->sas_hba.sas_port_list, port_list) { + if (mpt2sas_port->remote_identify.device_type == + SAS_END_DEVICE) { + sas_device = + mpt2sas_scsih_sas_device_find_by_sas_address(ioc, + mpt2sas_port->remote_identify.sas_address); + if (sas_device) { + _scsih_remove_device(ioc, sas_device->handle); + goto retry_again; + } + } else { + expander_sibling = + mpt2sas_scsih_expander_find_by_sas_address(ioc, + mpt2sas_port->remote_identify.sas_address); + if (expander_sibling) { + _scsih_expander_remove(ioc, + expander_sibling->handle); + goto retry_again; + } + } + } + + /* free phys attached to the sas_host */ + if (ioc->sas_hba.num_phys) { + kfree(ioc->sas_hba.phy); + ioc->sas_hba.phy = NULL; + ioc->sas_hba.num_phys = 0; + } + + sas_remove_host(shost); + mpt2sas_base_detach(ioc); + list_del(&ioc->list); + scsi_remove_host(shost); + scsi_host_put(shost); +} + +/** + * _scsih_probe_boot_devices - reports 1st device + * @ioc: per adapter object + * + * If specified in bios page 2, this routine reports the 1st + * device scsi-ml or sas transport for persistent boot device + * purposes. Please refer to function _scsih_determine_boot_device() + */ +static void +_scsih_probe_boot_devices(struct MPT2SAS_ADAPTER *ioc) +{ + u8 is_raid; + void *device; + struct _sas_device *sas_device; + struct _raid_device *raid_device; + u16 handle, parent_handle; + u64 sas_address; + unsigned long flags; + int rc; + + device = NULL; + if (ioc->req_boot_device.device) { + device = ioc->req_boot_device.device; + is_raid = ioc->req_boot_device.is_raid; + } else if (ioc->req_alt_boot_device.device) { + device = ioc->req_alt_boot_device.device; + is_raid = ioc->req_alt_boot_device.is_raid; + } else if (ioc->current_boot_device.device) { + device = ioc->current_boot_device.device; + is_raid = ioc->current_boot_device.is_raid; + } + + if (!device) + return; + + if (is_raid) { + raid_device = device; + rc = scsi_add_device(ioc->shost, RAID_CHANNEL, + raid_device->id, 0); + if (rc) + _scsih_raid_device_remove(ioc, raid_device); + } else { + sas_device = device; + handle = sas_device->handle; + parent_handle = sas_device->parent_handle; + sas_address = sas_device->sas_address; + spin_lock_irqsave(&ioc->sas_device_lock, flags); + list_move_tail(&sas_device->list, &ioc->sas_device_list); + spin_unlock_irqrestore(&ioc->sas_device_lock, flags); + if (!mpt2sas_transport_port_add(ioc, sas_device->handle, + sas_device->parent_handle)) { + _scsih_sas_device_remove(ioc, sas_device); + } else if (!sas_device->starget) { + mpt2sas_transport_port_remove(ioc, sas_address, + parent_handle); + _scsih_sas_device_remove(ioc, sas_device); + } + } +} + +/** + * _scsih_probe_raid - reporting raid volumes to scsi-ml + * @ioc: per adapter object + * + * Called during initial loading of the driver. + */ +static void +_scsih_probe_raid(struct MPT2SAS_ADAPTER *ioc) +{ + struct _raid_device *raid_device, *raid_next; + int rc; + + list_for_each_entry_safe(raid_device, raid_next, + &ioc->raid_device_list, list) { + if (raid_device->starget) + continue; + rc = scsi_add_device(ioc->shost, RAID_CHANNEL, + raid_device->id, 0); + if (rc) + _scsih_raid_device_remove(ioc, raid_device); + } +} + +/** + * _scsih_probe_sas - reporting raid volumes to sas transport + * @ioc: per adapter object + * + * Called during initial loading of the driver. + */ +static void +_scsih_probe_sas(struct MPT2SAS_ADAPTER *ioc) +{ + struct _sas_device *sas_device, *next; + unsigned long flags; + u16 handle, parent_handle; + u64 sas_address; + + /* SAS Device List */ + list_for_each_entry_safe(sas_device, next, &ioc->sas_device_init_list, + list) { + spin_lock_irqsave(&ioc->sas_device_lock, flags); + list_move_tail(&sas_device->list, &ioc->sas_device_list); + spin_unlock_irqrestore(&ioc->sas_device_lock, flags); + + handle = sas_device->handle; + parent_handle = sas_device->parent_handle; + sas_address = sas_device->sas_address; + if (!mpt2sas_transport_port_add(ioc, handle, parent_handle)) { + _scsih_sas_device_remove(ioc, sas_device); + } else if (!sas_device->starget) { + mpt2sas_transport_port_remove(ioc, sas_address, + parent_handle); + _scsih_sas_device_remove(ioc, sas_device); + } + } +} + +/** + * _scsih_probe_devices - probing for devices + * @ioc: per adapter object + * + * Called during initial loading of the driver. + */ +static void +_scsih_probe_devices(struct MPT2SAS_ADAPTER *ioc) +{ + u16 volume_mapping_flags = + le16_to_cpu(ioc->ioc_pg8.IRVolumeMappingFlags) & + MPI2_IOCPAGE8_IRFLAGS_MASK_VOLUME_MAPPING_MODE; + + if (!(ioc->facts.ProtocolFlags & MPI2_IOCFACTS_PROTOCOL_SCSI_INITIATOR)) + return; /* return when IOC doesn't support initiator mode */ + + _scsih_probe_boot_devices(ioc); + + if (ioc->ir_firmware) { + if ((volume_mapping_flags & + MPI2_IOCPAGE8_IRFLAGS_HIGH_VOLUME_MAPPING)) { + _scsih_probe_sas(ioc); + _scsih_probe_raid(ioc); + } else { + _scsih_probe_raid(ioc); + _scsih_probe_sas(ioc); + } + } else + _scsih_probe_sas(ioc); +} + +/** + * scsih_probe - attach and add scsi host + * @pdev: PCI device struct + * @id: pci device id + * + * Returns 0 success, anything else error. + */ +static int +scsih_probe(struct pci_dev *pdev, const struct pci_device_id *id) +{ + struct MPT2SAS_ADAPTER *ioc; + struct Scsi_Host *shost; + + shost = scsi_host_alloc(&scsih_driver_template, + sizeof(struct MPT2SAS_ADAPTER)); + if (!shost) + return -ENODEV; + + /* init local params */ + ioc = shost_priv(shost); + memset(ioc, 0, sizeof(struct MPT2SAS_ADAPTER)); + INIT_LIST_HEAD(&ioc->list); + list_add_tail(&ioc->list, &ioc_list); + ioc->shost = shost; + ioc->id = mpt_ids++; + sprintf(ioc->name, "%s%d", MPT2SAS_DRIVER_NAME, ioc->id); + ioc->pdev = pdev; + ioc->scsi_io_cb_idx = scsi_io_cb_idx; + ioc->tm_cb_idx = tm_cb_idx; + ioc->ctl_cb_idx = ctl_cb_idx; + ioc->base_cb_idx = base_cb_idx; + ioc->transport_cb_idx = transport_cb_idx; + ioc->config_cb_idx = config_cb_idx; + ioc->logging_level = logging_level; + /* misc semaphores and spin locks */ + spin_lock_init(&ioc->ioc_reset_in_progress_lock); + spin_lock_init(&ioc->scsi_lookup_lock); + spin_lock_init(&ioc->sas_device_lock); + spin_lock_init(&ioc->sas_node_lock); + spin_lock_init(&ioc->fw_event_lock); + spin_lock_init(&ioc->raid_device_lock); + + INIT_LIST_HEAD(&ioc->sas_device_list); + INIT_LIST_HEAD(&ioc->sas_device_init_list); + INIT_LIST_HEAD(&ioc->sas_expander_list); + INIT_LIST_HEAD(&ioc->fw_event_list); + INIT_LIST_HEAD(&ioc->raid_device_list); + INIT_LIST_HEAD(&ioc->sas_hba.sas_port_list); + + /* init shost parameters */ + shost->max_cmd_len = 16; + shost->max_lun = max_lun; + shost->transportt = mpt2sas_transport_template; + shost->unique_id = ioc->id; + + if ((scsi_add_host(shost, &pdev->dev))) { + printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", + ioc->name, __FILE__, __LINE__, __func__); + list_del(&ioc->list); + goto out_add_shost_fail; + } + + /* event thread */ + snprintf(ioc->firmware_event_name, sizeof(ioc->firmware_event_name), + "fw_event%d", ioc->id); + ioc->firmware_event_thread = create_singlethread_workqueue( + ioc->firmware_event_name); + if (!ioc->firmware_event_thread) { + printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", + ioc->name, __FILE__, __LINE__, __func__); + goto out_thread_fail; + } + + ioc->wait_for_port_enable_to_complete = 1; + if ((mpt2sas_base_attach(ioc))) { + printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", + ioc->name, __FILE__, __LINE__, __func__); + goto out_attach_fail; + } + + ioc->wait_for_port_enable_to_complete = 0; + _scsih_probe_devices(ioc); + return 0; + + out_attach_fail: + destroy_workqueue(ioc->firmware_event_thread); + out_thread_fail: + list_del(&ioc->list); + scsi_remove_host(shost); + out_add_shost_fail: + return -ENODEV; +} + +#ifdef CONFIG_PM +/** + * scsih_suspend - power management suspend main entry point + * @pdev: PCI device struct + * @state: PM state change to (usually PCI_D3) + * + * Returns 0 success, anything else error. + */ +static int +scsih_suspend(struct pci_dev *pdev, pm_message_t state) +{ + struct Scsi_Host *shost = pci_get_drvdata(pdev); + struct MPT2SAS_ADAPTER *ioc = shost_priv(shost); + u32 device_state; + + flush_scheduled_work(); + scsi_block_requests(shost); + device_state = pci_choose_state(pdev, state); + printk(MPT2SAS_INFO_FMT "pdev=0x%p, slot=%s, entering " + "operating state [D%d]\n", ioc->name, pdev, + pci_name(pdev), device_state); + + mpt2sas_base_free_resources(ioc); + pci_save_state(pdev); + pci_disable_device(pdev); + pci_set_power_state(pdev, device_state); + return 0; +} + +/** + * scsih_resume - power management resume main entry point + * @pdev: PCI device struct + * + * Returns 0 success, anything else error. + */ +static int +scsih_resume(struct pci_dev *pdev) +{ + struct Scsi_Host *shost = pci_get_drvdata(pdev); + struct MPT2SAS_ADAPTER *ioc = shost_priv(shost); + u32 device_state = pdev->current_state; + int r; + + printk(MPT2SAS_INFO_FMT "pdev=0x%p, slot=%s, previous " + "operating state [D%d]\n", ioc->name, pdev, + pci_name(pdev), device_state); + + pci_set_power_state(pdev, PCI_D0); + pci_enable_wake(pdev, PCI_D0, 0); + pci_restore_state(pdev); + ioc->pdev = pdev; + r = mpt2sas_base_map_resources(ioc); + if (r) + return r; + + mpt2sas_base_hard_reset_handler(ioc, CAN_SLEEP, SOFT_RESET); + scsi_unblock_requests(shost); + return 0; +} +#endif /* CONFIG_PM */ + + +static struct pci_driver scsih_driver = { + .name = MPT2SAS_DRIVER_NAME, + .id_table = scsih_pci_table, + .probe = scsih_probe, + .remove = __devexit_p(scsih_remove), +#ifdef CONFIG_PM + .suspend = scsih_suspend, + .resume = scsih_resume, +#endif +}; + + +/** + * scsih_init - main entry point for this driver. + * + * Returns 0 success, anything else error. + */ +static int __init +scsih_init(void) +{ + int error; + + mpt_ids = 0; + printk(KERN_INFO "%s version %s loaded\n", MPT2SAS_DRIVER_NAME, + MPT2SAS_DRIVER_VERSION); + + mpt2sas_transport_template = + sas_attach_transport(&mpt2sas_transport_functions); + if (!mpt2sas_transport_template) + return -ENODEV; + + mpt2sas_base_initialize_callback_handler(); + + /* queuecommand callback hander */ + scsi_io_cb_idx = mpt2sas_base_register_callback_handler(scsih_io_done); + + /* task managment callback handler */ + tm_cb_idx = mpt2sas_base_register_callback_handler(scsih_tm_done); + + /* base internal commands callback handler */ + base_cb_idx = mpt2sas_base_register_callback_handler(mpt2sas_base_done); + + /* transport internal commands callback handler */ + transport_cb_idx = mpt2sas_base_register_callback_handler( + mpt2sas_transport_done); + + /* configuration page API internal commands callback handler */ + config_cb_idx = mpt2sas_base_register_callback_handler( + mpt2sas_config_done); + + /* ctl module callback handler */ + ctl_cb_idx = mpt2sas_base_register_callback_handler(mpt2sas_ctl_done); + + mpt2sas_ctl_init(); + + error = pci_register_driver(&scsih_driver); + if (error) + sas_release_transport(mpt2sas_transport_template); + + return error; +} + +/** + * scsih_exit - exit point for this driver (when it is a module). + * + * Returns 0 success, anything else error. + */ +static void __exit +scsih_exit(void) +{ + printk(KERN_INFO "mpt2sas version %s unloading\n", + MPT2SAS_DRIVER_VERSION); + + pci_unregister_driver(&scsih_driver); + + sas_release_transport(mpt2sas_transport_template); + mpt2sas_base_release_callback_handler(scsi_io_cb_idx); + mpt2sas_base_release_callback_handler(tm_cb_idx); + mpt2sas_base_release_callback_handler(base_cb_idx); + mpt2sas_base_release_callback_handler(transport_cb_idx); + mpt2sas_base_release_callback_handler(config_cb_idx); + mpt2sas_base_release_callback_handler(ctl_cb_idx); + + mpt2sas_ctl_exit(); +} + +module_init(scsih_init); +module_exit(scsih_exit); diff --git a/drivers/scsi/mpt2sas/mpt2sas_transport.c b/drivers/scsi/mpt2sas/mpt2sas_transport.c new file mode 100644 index 0000000..e03dc0b --- /dev/null +++ b/drivers/scsi/mpt2sas/mpt2sas_transport.c @@ -0,0 +1,1211 @@ +/* + * SAS Transport Layer for MPT (Message Passing Technology) based controllers + * + * This code is based on drivers/scsi/mpt2sas/mpt2_transport.c + * Copyright (C) 2007-2008 LSI Corporation + * (mailto:DL-MPTFusionLinux@lsi.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * NO WARRANTY + * THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR + * CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT + * LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT, + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is + * solely responsible for determining the appropriateness of using and + * distributing the Program and assumes all risks associated with its + * exercise of rights under this Agreement, including but not limited to + * the risks and costs of program errors, damage to or loss of data, + * programs or equipment, and unavailability or interruption of operations. + + * DISCLAIMER OF LIABILITY + * NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR + * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE + * USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED + * HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES + + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, + * USA. + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include + +#include "mpt2sas_base.h" +/** + * _transport_sas_node_find_by_handle - sas node search + * @ioc: per adapter object + * @handle: expander or hba handle (assigned by firmware) + * Context: Calling function should acquire ioc->sas_node_lock. + * + * Search for either hba phys or expander device based on handle, then returns + * the sas_node object. + */ +static struct _sas_node * +_transport_sas_node_find_by_handle(struct MPT2SAS_ADAPTER *ioc, u16 handle) +{ + int i; + + for (i = 0; i < ioc->sas_hba.num_phys; i++) + if (ioc->sas_hba.phy[i].handle == handle) + return &ioc->sas_hba; + + return mpt2sas_scsih_expander_find_by_handle(ioc, handle); +} + +/** + * _transport_convert_phy_link_rate - + * @link_rate: link rate returned from mpt firmware + * + * Convert link_rate from mpi fusion into sas_transport form. + */ +static enum sas_linkrate +_transport_convert_phy_link_rate(u8 link_rate) +{ + enum sas_linkrate rc; + + switch (link_rate) { + case MPI2_SAS_NEG_LINK_RATE_1_5: + rc = SAS_LINK_RATE_1_5_GBPS; + break; + case MPI2_SAS_NEG_LINK_RATE_3_0: + rc = SAS_LINK_RATE_3_0_GBPS; + break; + case MPI2_SAS_NEG_LINK_RATE_6_0: + rc = SAS_LINK_RATE_6_0_GBPS; + break; + case MPI2_SAS_NEG_LINK_RATE_PHY_DISABLED: + rc = SAS_PHY_DISABLED; + break; + case MPI2_SAS_NEG_LINK_RATE_NEGOTIATION_FAILED: + rc = SAS_LINK_RATE_FAILED; + break; + case MPI2_SAS_NEG_LINK_RATE_PORT_SELECTOR: + rc = SAS_SATA_PORT_SELECTOR; + break; + case MPI2_SAS_NEG_LINK_RATE_SMP_RESET_IN_PROGRESS: + rc = SAS_PHY_RESET_IN_PROGRESS; + break; + default: + case MPI2_SAS_NEG_LINK_RATE_SATA_OOB_COMPLETE: + case MPI2_SAS_NEG_LINK_RATE_UNKNOWN_LINK_RATE: + rc = SAS_LINK_RATE_UNKNOWN; + break; + } + return rc; +} + +/** + * _transport_set_identify - set identify for phys and end devices + * @ioc: per adapter object + * @handle: device handle + * @identify: sas identify info + * + * Populates sas identify info. + * + * Returns 0 for success, non-zero for failure. + */ +static int +_transport_set_identify(struct MPT2SAS_ADAPTER *ioc, u16 handle, + struct sas_identify *identify) +{ + Mpi2SasDevicePage0_t sas_device_pg0; + Mpi2ConfigReply_t mpi_reply; + u32 device_info; + u32 ioc_status; + + if ((mpt2sas_config_get_sas_device_pg0(ioc, &mpi_reply, &sas_device_pg0, + MPI2_SAS_DEVICE_PGAD_FORM_HANDLE, handle))) { + printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", + ioc->name, __FILE__, __LINE__, __func__); + return -1; + } + + ioc_status = le16_to_cpu(mpi_reply.IOCStatus) & + MPI2_IOCSTATUS_MASK; + if (ioc_status != MPI2_IOCSTATUS_SUCCESS) { + printk(MPT2SAS_ERR_FMT "handle(0x%04x), ioc_status(0x%04x)" + "\nfailure at %s:%d/%s()!\n", ioc->name, handle, ioc_status, + __FILE__, __LINE__, __func__); + return -1; + } + + memset(identify, 0, sizeof(identify)); + device_info = le32_to_cpu(sas_device_pg0.DeviceInfo); + + /* sas_address */ + identify->sas_address = le64_to_cpu(sas_device_pg0.SASAddress); + + /* device_type */ + switch (device_info & MPI2_SAS_DEVICE_INFO_MASK_DEVICE_TYPE) { + case MPI2_SAS_DEVICE_INFO_NO_DEVICE: + identify->device_type = SAS_PHY_UNUSED; + break; + case MPI2_SAS_DEVICE_INFO_END_DEVICE: + identify->device_type = SAS_END_DEVICE; + break; + case MPI2_SAS_DEVICE_INFO_EDGE_EXPANDER: + identify->device_type = SAS_EDGE_EXPANDER_DEVICE; + break; + case MPI2_SAS_DEVICE_INFO_FANOUT_EXPANDER: + identify->device_type = SAS_FANOUT_EXPANDER_DEVICE; + break; + } + + /* initiator_port_protocols */ + if (device_info & MPI2_SAS_DEVICE_INFO_SSP_INITIATOR) + identify->initiator_port_protocols |= SAS_PROTOCOL_SSP; + if (device_info & MPI2_SAS_DEVICE_INFO_STP_INITIATOR) + identify->initiator_port_protocols |= SAS_PROTOCOL_STP; + if (device_info & MPI2_SAS_DEVICE_INFO_SMP_INITIATOR) + identify->initiator_port_protocols |= SAS_PROTOCOL_SMP; + if (device_info & MPI2_SAS_DEVICE_INFO_SATA_HOST) + identify->initiator_port_protocols |= SAS_PROTOCOL_SATA; + + /* target_port_protocols */ + if (device_info & MPI2_SAS_DEVICE_INFO_SSP_TARGET) + identify->target_port_protocols |= SAS_PROTOCOL_SSP; + if (device_info & MPI2_SAS_DEVICE_INFO_STP_TARGET) + identify->target_port_protocols |= SAS_PROTOCOL_STP; + if (device_info & MPI2_SAS_DEVICE_INFO_SMP_TARGET) + identify->target_port_protocols |= SAS_PROTOCOL_SMP; + if (device_info & MPI2_SAS_DEVICE_INFO_SATA_DEVICE) + identify->target_port_protocols |= SAS_PROTOCOL_SATA; + + return 0; +} + +/** + * mpt2sas_transport_done - internal transport layer callback handler. + * @ioc: per adapter object + * @smid: system request message index + * @VF_ID: virtual function id + * @reply: reply message frame(lower 32bit addr) + * + * Callback handler when sending internal generated transport cmds. + * The callback index passed is `ioc->transport_cb_idx` + * + * Return nothing. + */ +void +mpt2sas_transport_done(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 VF_ID, + u32 reply) +{ + MPI2DefaultReply_t *mpi_reply; + + mpi_reply = mpt2sas_base_get_reply_virt_addr(ioc, reply); + if (ioc->transport_cmds.status == MPT2_CMD_NOT_USED) + return; + if (ioc->transport_cmds.smid != smid) + return; + ioc->transport_cmds.status |= MPT2_CMD_COMPLETE; + if (mpi_reply) { + memcpy(ioc->transport_cmds.reply, mpi_reply, + mpi_reply->MsgLength*4); + ioc->transport_cmds.status |= MPT2_CMD_REPLY_VALID; + } + ioc->transport_cmds.status &= ~MPT2_CMD_PENDING; + complete(&ioc->transport_cmds.done); +} + +/* report manufacture request structure */ +struct rep_manu_request{ + u8 smp_frame_type; + u8 function; + u8 reserved; + u8 request_length; +}; + +/* report manufacture reply structure */ +struct rep_manu_reply{ + u8 smp_frame_type; /* 0x41 */ + u8 function; /* 0x01 */ + u8 function_result; + u8 response_length; + u16 expander_change_count; + u8 reserved0[2]; + u8 sas_format:1; + u8 reserved1:7; + u8 reserved2[3]; + u8 vendor_id[SAS_EXPANDER_VENDOR_ID_LEN]; + u8 product_id[SAS_EXPANDER_PRODUCT_ID_LEN]; + u8 product_rev[SAS_EXPANDER_PRODUCT_REV_LEN]; + u8 component_vendor_id[SAS_EXPANDER_COMPONENT_VENDOR_ID_LEN]; + u16 component_id; + u8 component_revision_id; + u8 reserved3; + u8 vendor_specific[8]; +}; + +/** + * transport_expander_report_manufacture - obtain SMP report_manufacture + * @ioc: per adapter object + * @sas_address: expander sas address + * @edev: the sas_expander_device object + * + * Fills in the sas_expander_device object when SMP port is created. + * + * Returns 0 for success, non-zero for failure. + */ +static int +transport_expander_report_manufacture(struct MPT2SAS_ADAPTER *ioc, + u64 sas_address, struct sas_expander_device *edev) +{ + Mpi2SmpPassthroughRequest_t *mpi_request; + Mpi2SmpPassthroughReply_t *mpi_reply; + struct rep_manu_reply *manufacture_reply; + struct rep_manu_request *manufacture_request; + int rc; + u16 smid; + u32 ioc_state; + unsigned long timeleft; + void *psge; + u32 sgl_flags; + u8 issue_reset = 0; + unsigned long flags; + void *data_out = NULL; + dma_addr_t data_out_dma; + u32 sz; + u64 *sas_address_le; + u16 wait_state_count; + + spin_lock_irqsave(&ioc->ioc_reset_in_progress_lock, flags); + if (ioc->ioc_reset_in_progress) { + spin_unlock_irqrestore(&ioc->ioc_reset_in_progress_lock, flags); + printk(MPT2SAS_INFO_FMT "%s: host reset in progress!\n", + __func__, ioc->name); + return -EFAULT; + } + spin_unlock_irqrestore(&ioc->ioc_reset_in_progress_lock, flags); + + mutex_lock(&ioc->transport_cmds.mutex); + + if (ioc->transport_cmds.status != MPT2_CMD_NOT_USED) { + printk(MPT2SAS_ERR_FMT "%s: transport_cmds in use\n", + ioc->name, __func__); + rc = -EAGAIN; + goto out; + } + ioc->transport_cmds.status = MPT2_CMD_PENDING; + + wait_state_count = 0; + ioc_state = mpt2sas_base_get_iocstate(ioc, 1); + while (ioc_state != MPI2_IOC_STATE_OPERATIONAL) { + if (wait_state_count++ == 10) { + printk(MPT2SAS_ERR_FMT + "%s: failed due to ioc not operational\n", + ioc->name, __func__); + rc = -EFAULT; + goto out; + } + ssleep(1); + ioc_state = mpt2sas_base_get_iocstate(ioc, 1); + printk(MPT2SAS_INFO_FMT "%s: waiting for " + "operational state(count=%d)\n", ioc->name, + __func__, wait_state_count); + } + if (wait_state_count) + printk(MPT2SAS_INFO_FMT "%s: ioc is operational\n", + ioc->name, __func__); + + smid = mpt2sas_base_get_smid(ioc, ioc->transport_cb_idx); + if (!smid) { + printk(MPT2SAS_ERR_FMT "%s: failed obtaining a smid\n", + ioc->name, __func__); + rc = -EAGAIN; + goto out; + } + + rc = 0; + mpi_request = mpt2sas_base_get_msg_frame(ioc, smid); + ioc->transport_cmds.smid = smid; + + sz = sizeof(struct rep_manu_request) + sizeof(struct rep_manu_reply); + data_out = pci_alloc_consistent(ioc->pdev, sz, &data_out_dma); + + if (!data_out) { + printk(KERN_ERR "failure at %s:%d/%s()!\n", __FILE__, + __LINE__, __func__); + rc = -ENOMEM; + mpt2sas_base_free_smid(ioc, smid); + goto out; + } + + manufacture_request = data_out; + manufacture_request->smp_frame_type = 0x40; + manufacture_request->function = 1; + manufacture_request->reserved = 0; + manufacture_request->request_length = 0; + + memset(mpi_request, 0, sizeof(Mpi2SmpPassthroughRequest_t)); + mpi_request->Function = MPI2_FUNCTION_SMP_PASSTHROUGH; + mpi_request->PhysicalPort = 0xFF; + sas_address_le = (u64 *)&mpi_request->SASAddress; + *sas_address_le = cpu_to_le64(sas_address); + mpi_request->RequestDataLength = sizeof(struct rep_manu_request); + psge = &mpi_request->SGL; + + /* WRITE sgel first */ + sgl_flags = (MPI2_SGE_FLAGS_SIMPLE_ELEMENT | + MPI2_SGE_FLAGS_END_OF_BUFFER | MPI2_SGE_FLAGS_HOST_TO_IOC); + sgl_flags = sgl_flags << MPI2_SGE_FLAGS_SHIFT; + ioc->base_add_sg_single(psge, sgl_flags | + sizeof(struct rep_manu_request), data_out_dma); + + /* incr sgel */ + psge += ioc->sge_size; + + /* READ sgel last */ + sgl_flags = (MPI2_SGE_FLAGS_SIMPLE_ELEMENT | + MPI2_SGE_FLAGS_LAST_ELEMENT | MPI2_SGE_FLAGS_END_OF_BUFFER | + MPI2_SGE_FLAGS_END_OF_LIST); + sgl_flags = sgl_flags << MPI2_SGE_FLAGS_SHIFT; + ioc->base_add_sg_single(psge, sgl_flags | + sizeof(struct rep_manu_reply), data_out_dma + + sizeof(struct rep_manu_request)); + + dtransportprintk(ioc, printk(MPT2SAS_DEBUG_FMT "report_manufacture - " + "send to sas_addr(0x%016llx)\n", ioc->name, + (unsigned long long)sas_address)); + mpt2sas_base_put_smid_default(ioc, smid, 0 /* VF_ID */); + timeleft = wait_for_completion_timeout(&ioc->transport_cmds.done, + 10*HZ); + + if (!(ioc->transport_cmds.status & MPT2_CMD_COMPLETE)) { + printk(MPT2SAS_ERR_FMT "%s: timeout\n", + ioc->name, __func__); + _debug_dump_mf(mpi_request, + sizeof(Mpi2SmpPassthroughRequest_t)/4); + if (!(ioc->transport_cmds.status & MPT2_CMD_RESET)) + issue_reset = 1; + goto issue_host_reset; + } + + dtransportprintk(ioc, printk(MPT2SAS_DEBUG_FMT "report_manufacture - " + "complete\n", ioc->name)); + + if (ioc->transport_cmds.status & MPT2_CMD_REPLY_VALID) { + u8 *tmp; + + mpi_reply = ioc->transport_cmds.reply; + + dtransportprintk(ioc, printk(MPT2SAS_DEBUG_FMT + "report_manufacture - reply data transfer size(%d)\n", + ioc->name, le16_to_cpu(mpi_reply->ResponseDataLength))); + + if (le16_to_cpu(mpi_reply->ResponseDataLength) != + sizeof(struct rep_manu_reply)) + goto out; + + manufacture_reply = data_out + sizeof(struct rep_manu_request); + strncpy(edev->vendor_id, manufacture_reply->vendor_id, + SAS_EXPANDER_VENDOR_ID_LEN); + strncpy(edev->product_id, manufacture_reply->product_id, + SAS_EXPANDER_PRODUCT_ID_LEN); + strncpy(edev->product_rev, manufacture_reply->product_rev, + SAS_EXPANDER_PRODUCT_REV_LEN); + edev->level = manufacture_reply->sas_format; + if (manufacture_reply->sas_format) { + strncpy(edev->component_vendor_id, + manufacture_reply->component_vendor_id, + SAS_EXPANDER_COMPONENT_VENDOR_ID_LEN); + tmp = (u8 *)&manufacture_reply->component_id; + edev->component_id = tmp[0] << 8 | tmp[1]; + edev->component_revision_id = + manufacture_reply->component_revision_id; + } + } else + dtransportprintk(ioc, printk(MPT2SAS_DEBUG_FMT + "report_manufacture - no reply\n", ioc->name)); + + issue_host_reset: + if (issue_reset) + mpt2sas_base_hard_reset_handler(ioc, CAN_SLEEP, + FORCE_BIG_HAMMER); + out: + ioc->transport_cmds.status = MPT2_CMD_NOT_USED; + if (data_out) + pci_free_consistent(ioc->pdev, sz, data_out, data_out_dma); + + mutex_unlock(&ioc->transport_cmds.mutex); + return rc; +} + +/** + * mpt2sas_transport_port_add - insert port to the list + * @ioc: per adapter object + * @handle: handle of attached device + * @parent_handle: parent handle(either hba or expander) + * Context: This function will acquire ioc->sas_node_lock. + * + * Adding new port object to the sas_node->sas_port_list. + * + * Returns mpt2sas_port. + */ +struct _sas_port * +mpt2sas_transport_port_add(struct MPT2SAS_ADAPTER *ioc, u16 handle, + u16 parent_handle) +{ + struct _sas_phy *mpt2sas_phy, *next; + struct _sas_port *mpt2sas_port; + unsigned long flags; + struct _sas_node *sas_node; + struct sas_rphy *rphy; + int i; + struct sas_port *port; + + if (!parent_handle) + return NULL; + + mpt2sas_port = kzalloc(sizeof(struct _sas_port), + GFP_KERNEL); + if (!mpt2sas_port) { + printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", + ioc->name, __FILE__, __LINE__, __func__); + return NULL; + } + + INIT_LIST_HEAD(&mpt2sas_port->port_list); + INIT_LIST_HEAD(&mpt2sas_port->phy_list); + spin_lock_irqsave(&ioc->sas_node_lock, flags); + sas_node = _transport_sas_node_find_by_handle(ioc, parent_handle); + spin_unlock_irqrestore(&ioc->sas_node_lock, flags); + + if (!sas_node) { + printk(MPT2SAS_ERR_FMT "%s: Could not find parent(0x%04x)!\n", + ioc->name, __func__, parent_handle); + goto out_fail; + } + + mpt2sas_port->handle = parent_handle; + mpt2sas_port->sas_address = sas_node->sas_address; + if ((_transport_set_identify(ioc, handle, + &mpt2sas_port->remote_identify))) { + printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", + ioc->name, __FILE__, __LINE__, __func__); + goto out_fail; + } + + if (mpt2sas_port->remote_identify.device_type == SAS_PHY_UNUSED) { + printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", + ioc->name, __FILE__, __LINE__, __func__); + goto out_fail; + } + + for (i = 0; i < sas_node->num_phys; i++) { + if (sas_node->phy[i].remote_identify.sas_address != + mpt2sas_port->remote_identify.sas_address) + continue; + list_add_tail(&sas_node->phy[i].port_siblings, + &mpt2sas_port->phy_list); + mpt2sas_port->num_phys++; + } + + if (!mpt2sas_port->num_phys) { + printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", + ioc->name, __FILE__, __LINE__, __func__); + goto out_fail; + } + + port = sas_port_alloc_num(sas_node->parent_dev); + if ((sas_port_add(port))) { + printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", + ioc->name, __FILE__, __LINE__, __func__); + goto out_fail; + } + + list_for_each_entry(mpt2sas_phy, &mpt2sas_port->phy_list, + port_siblings) { + if ((ioc->logging_level & MPT_DEBUG_TRANSPORT)) + dev_printk(KERN_INFO, &port->dev, "add: handle(0x%04x)" + ", sas_addr(0x%016llx), phy(%d)\n", handle, + (unsigned long long) + mpt2sas_port->remote_identify.sas_address, + mpt2sas_phy->phy_id); + sas_port_add_phy(port, mpt2sas_phy->phy); + } + + mpt2sas_port->port = port; + if (mpt2sas_port->remote_identify.device_type == SAS_END_DEVICE) + rphy = sas_end_device_alloc(port); + else + rphy = sas_expander_alloc(port, + mpt2sas_port->remote_identify.device_type); + + rphy->identify = mpt2sas_port->remote_identify; + if ((sas_rphy_add(rphy))) { + printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", + ioc->name, __FILE__, __LINE__, __func__); + } + if ((ioc->logging_level & MPT_DEBUG_TRANSPORT)) + dev_printk(KERN_INFO, &rphy->dev, "add: handle(0x%04x), " + "sas_addr(0x%016llx)\n", handle, + (unsigned long long) + mpt2sas_port->remote_identify.sas_address); + mpt2sas_port->rphy = rphy; + spin_lock_irqsave(&ioc->sas_node_lock, flags); + list_add_tail(&mpt2sas_port->port_list, &sas_node->sas_port_list); + spin_unlock_irqrestore(&ioc->sas_node_lock, flags); + + /* fill in report manufacture */ + if (mpt2sas_port->remote_identify.device_type == + MPI2_SAS_DEVICE_INFO_EDGE_EXPANDER || + mpt2sas_port->remote_identify.device_type == + MPI2_SAS_DEVICE_INFO_FANOUT_EXPANDER) + transport_expander_report_manufacture(ioc, + mpt2sas_port->remote_identify.sas_address, + rphy_to_expander_device(rphy)); + + return mpt2sas_port; + + out_fail: + list_for_each_entry_safe(mpt2sas_phy, next, &mpt2sas_port->phy_list, + port_siblings) + list_del(&mpt2sas_phy->port_siblings); + kfree(mpt2sas_port); + return NULL; +} + +/** + * mpt2sas_transport_port_remove - remove port from the list + * @ioc: per adapter object + * @sas_address: sas address of attached device + * @parent_handle: handle to the upstream parent(either hba or expander) + * Context: This function will acquire ioc->sas_node_lock. + * + * Removing object and freeing associated memory from the + * ioc->sas_port_list. + * + * Return nothing. + */ +void +mpt2sas_transport_port_remove(struct MPT2SAS_ADAPTER *ioc, u64 sas_address, + u16 parent_handle) +{ + int i; + unsigned long flags; + struct _sas_port *mpt2sas_port, *next; + struct _sas_node *sas_node; + u8 found = 0; + struct _sas_phy *mpt2sas_phy, *next_phy; + + spin_lock_irqsave(&ioc->sas_node_lock, flags); + sas_node = _transport_sas_node_find_by_handle(ioc, parent_handle); + spin_unlock_irqrestore(&ioc->sas_node_lock, flags); + if (!sas_node) + return; + list_for_each_entry_safe(mpt2sas_port, next, &sas_node->sas_port_list, + port_list) { + if (mpt2sas_port->remote_identify.sas_address != sas_address) + continue; + found = 1; + list_del(&mpt2sas_port->port_list); + goto out; + } + out: + if (!found) + return; + + for (i = 0; i < sas_node->num_phys; i++) { + if (sas_node->phy[i].remote_identify.sas_address == sas_address) + memset(&sas_node->phy[i].remote_identify, 0 , + sizeof(struct sas_identify)); + } + + list_for_each_entry_safe(mpt2sas_phy, next_phy, + &mpt2sas_port->phy_list, port_siblings) { + if ((ioc->logging_level & MPT_DEBUG_TRANSPORT)) + dev_printk(KERN_INFO, &mpt2sas_port->port->dev, + "remove: parent_handle(0x%04x), " + "sas_addr(0x%016llx), phy(%d)\n", parent_handle, + (unsigned long long) + mpt2sas_port->remote_identify.sas_address, + mpt2sas_phy->phy_id); + sas_port_delete_phy(mpt2sas_port->port, mpt2sas_phy->phy); + list_del(&mpt2sas_phy->port_siblings); + } + sas_port_delete(mpt2sas_port->port); + kfree(mpt2sas_port); +} + +/** + * mpt2sas_transport_add_host_phy - report sas_host phy to transport + * @ioc: per adapter object + * @mpt2sas_phy: mpt2sas per phy object + * @phy_pg0: sas phy page 0 + * @parent_dev: parent device class object + * + * Returns 0 for success, non-zero for failure. + */ +int +mpt2sas_transport_add_host_phy(struct MPT2SAS_ADAPTER *ioc, struct _sas_phy + *mpt2sas_phy, Mpi2SasPhyPage0_t phy_pg0, struct device *parent_dev) +{ + struct sas_phy *phy; + int phy_index = mpt2sas_phy->phy_id; + + + INIT_LIST_HEAD(&mpt2sas_phy->port_siblings); + phy = sas_phy_alloc(parent_dev, phy_index); + if (!phy) { + printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", + ioc->name, __FILE__, __LINE__, __func__); + return -1; + } + if ((_transport_set_identify(ioc, mpt2sas_phy->handle, + &mpt2sas_phy->identify))) { + printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", + ioc->name, __FILE__, __LINE__, __func__); + return -1; + } + phy->identify = mpt2sas_phy->identify; + mpt2sas_phy->attached_handle = le16_to_cpu(phy_pg0.AttachedDevHandle); + if (mpt2sas_phy->attached_handle) + _transport_set_identify(ioc, mpt2sas_phy->attached_handle, + &mpt2sas_phy->remote_identify); + phy->identify.phy_identifier = mpt2sas_phy->phy_id; + phy->negotiated_linkrate = _transport_convert_phy_link_rate( + phy_pg0.NegotiatedLinkRate & MPI2_SAS_NEG_LINK_RATE_MASK_PHYSICAL); + phy->minimum_linkrate_hw = _transport_convert_phy_link_rate( + phy_pg0.HwLinkRate & MPI2_SAS_HWRATE_MIN_RATE_MASK); + phy->maximum_linkrate_hw = _transport_convert_phy_link_rate( + phy_pg0.HwLinkRate >> 4); + phy->minimum_linkrate = _transport_convert_phy_link_rate( + phy_pg0.ProgrammedLinkRate & MPI2_SAS_PRATE_MIN_RATE_MASK); + phy->maximum_linkrate = _transport_convert_phy_link_rate( + phy_pg0.ProgrammedLinkRate >> 4); + + if ((sas_phy_add(phy))) { + printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", + ioc->name, __FILE__, __LINE__, __func__); + sas_phy_free(phy); + return -1; + } + if ((ioc->logging_level & MPT_DEBUG_TRANSPORT)) + dev_printk(KERN_INFO, &phy->dev, + "add: handle(0x%04x), sas_addr(0x%016llx)\n" + "\tattached_handle(0x%04x), sas_addr(0x%016llx)\n", + mpt2sas_phy->handle, (unsigned long long) + mpt2sas_phy->identify.sas_address, + mpt2sas_phy->attached_handle, + (unsigned long long) + mpt2sas_phy->remote_identify.sas_address); + mpt2sas_phy->phy = phy; + return 0; +} + + +/** + * mpt2sas_transport_add_expander_phy - report expander phy to transport + * @ioc: per adapter object + * @mpt2sas_phy: mpt2sas per phy object + * @expander_pg1: expander page 1 + * @parent_dev: parent device class object + * + * Returns 0 for success, non-zero for failure. + */ +int +mpt2sas_transport_add_expander_phy(struct MPT2SAS_ADAPTER *ioc, struct _sas_phy + *mpt2sas_phy, Mpi2ExpanderPage1_t expander_pg1, struct device *parent_dev) +{ + struct sas_phy *phy; + int phy_index = mpt2sas_phy->phy_id; + + INIT_LIST_HEAD(&mpt2sas_phy->port_siblings); + phy = sas_phy_alloc(parent_dev, phy_index); + if (!phy) { + printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", + ioc->name, __FILE__, __LINE__, __func__); + return -1; + } + if ((_transport_set_identify(ioc, mpt2sas_phy->handle, + &mpt2sas_phy->identify))) { + printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", + ioc->name, __FILE__, __LINE__, __func__); + return -1; + } + phy->identify = mpt2sas_phy->identify; + mpt2sas_phy->attached_handle = + le16_to_cpu(expander_pg1.AttachedDevHandle); + if (mpt2sas_phy->attached_handle) + _transport_set_identify(ioc, mpt2sas_phy->attached_handle, + &mpt2sas_phy->remote_identify); + phy->identify.phy_identifier = mpt2sas_phy->phy_id; + phy->negotiated_linkrate = _transport_convert_phy_link_rate( + expander_pg1.NegotiatedLinkRate & + MPI2_SAS_NEG_LINK_RATE_MASK_PHYSICAL); + phy->minimum_linkrate_hw = _transport_convert_phy_link_rate( + expander_pg1.HwLinkRate & MPI2_SAS_HWRATE_MIN_RATE_MASK); + phy->maximum_linkrate_hw = _transport_convert_phy_link_rate( + expander_pg1.HwLinkRate >> 4); + phy->minimum_linkrate = _transport_convert_phy_link_rate( + expander_pg1.ProgrammedLinkRate & MPI2_SAS_PRATE_MIN_RATE_MASK); + phy->maximum_linkrate = _transport_convert_phy_link_rate( + expander_pg1.ProgrammedLinkRate >> 4); + + if ((sas_phy_add(phy))) { + printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", + ioc->name, __FILE__, __LINE__, __func__); + sas_phy_free(phy); + return -1; + } + if ((ioc->logging_level & MPT_DEBUG_TRANSPORT)) + dev_printk(KERN_INFO, &phy->dev, + "add: handle(0x%04x), sas_addr(0x%016llx)\n" + "\tattached_handle(0x%04x), sas_addr(0x%016llx)\n", + mpt2sas_phy->handle, (unsigned long long) + mpt2sas_phy->identify.sas_address, + mpt2sas_phy->attached_handle, + (unsigned long long) + mpt2sas_phy->remote_identify.sas_address); + mpt2sas_phy->phy = phy; + return 0; +} + +/** + * mpt2sas_transport_update_phy_link_change - refreshing phy link changes and attached devices + * @ioc: per adapter object + * @handle: handle to sas_host or expander + * @attached_handle: attached device handle + * @phy_numberv: phy number + * @link_rate: new link rate + * + * Returns nothing. + */ +void +mpt2sas_transport_update_phy_link_change(struct MPT2SAS_ADAPTER *ioc, + u16 handle, u16 attached_handle, u8 phy_number, u8 link_rate) +{ + unsigned long flags; + struct _sas_node *sas_node; + struct _sas_phy *mpt2sas_phy; + + spin_lock_irqsave(&ioc->sas_node_lock, flags); + sas_node = _transport_sas_node_find_by_handle(ioc, handle); + spin_unlock_irqrestore(&ioc->sas_node_lock, flags); + if (!sas_node) + return; + + mpt2sas_phy = &sas_node->phy[phy_number]; + mpt2sas_phy->attached_handle = attached_handle; + if (attached_handle && (link_rate >= MPI2_SAS_NEG_LINK_RATE_1_5)) + _transport_set_identify(ioc, mpt2sas_phy->attached_handle, + &mpt2sas_phy->remote_identify); + else + memset(&mpt2sas_phy->remote_identify, 0 , sizeof(struct + sas_identify)); + + if (mpt2sas_phy->phy) + mpt2sas_phy->phy->negotiated_linkrate = + _transport_convert_phy_link_rate(link_rate); + + if ((ioc->logging_level & MPT_DEBUG_TRANSPORT)) + dev_printk(KERN_INFO, &mpt2sas_phy->phy->dev, + "refresh: handle(0x%04x), sas_addr(0x%016llx),\n" + "\tlink_rate(0x%02x), phy(%d)\n" + "\tattached_handle(0x%04x), sas_addr(0x%016llx)\n", + handle, (unsigned long long) + mpt2sas_phy->identify.sas_address, link_rate, + phy_number, attached_handle, + (unsigned long long) + mpt2sas_phy->remote_identify.sas_address); +} + +static inline void * +phy_to_ioc(struct sas_phy *phy) +{ + struct Scsi_Host *shost = dev_to_shost(phy->dev.parent); + return shost_priv(shost); +} + +static inline void * +rphy_to_ioc(struct sas_rphy *rphy) +{ + struct Scsi_Host *shost = dev_to_shost(rphy->dev.parent->parent); + return shost_priv(shost); +} + +/** + * transport_get_linkerrors - + * @phy: The sas phy object + * + * Only support sas_host direct attached phys. + * Returns 0 for success, non-zero for failure. + * + */ +static int +transport_get_linkerrors(struct sas_phy *phy) +{ + struct MPT2SAS_ADAPTER *ioc = phy_to_ioc(phy); + struct _sas_phy *mpt2sas_phy; + Mpi2ConfigReply_t mpi_reply; + Mpi2SasPhyPage1_t phy_pg1; + int i; + + for (i = 0, mpt2sas_phy = NULL; i < ioc->sas_hba.num_phys && + !mpt2sas_phy; i++) { + if (ioc->sas_hba.phy[i].phy != phy) + continue; + mpt2sas_phy = &ioc->sas_hba.phy[i]; + } + + if (!mpt2sas_phy) /* this phy not on sas_host */ + return -EINVAL; + + if ((mpt2sas_config_get_phy_pg1(ioc, &mpi_reply, &phy_pg1, + mpt2sas_phy->phy_id))) { + printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", + ioc->name, __FILE__, __LINE__, __func__); + return -ENXIO; + } + + if (mpi_reply.IOCStatus || mpi_reply.IOCLogInfo) + printk(MPT2SAS_INFO_FMT "phy(%d), ioc_status" + "(0x%04x), loginfo(0x%08x)\n", ioc->name, + mpt2sas_phy->phy_id, + le16_to_cpu(mpi_reply.IOCStatus), + le32_to_cpu(mpi_reply.IOCLogInfo)); + + phy->invalid_dword_count = le32_to_cpu(phy_pg1.InvalidDwordCount); + phy->running_disparity_error_count = + le32_to_cpu(phy_pg1.RunningDisparityErrorCount); + phy->loss_of_dword_sync_count = + le32_to_cpu(phy_pg1.LossDwordSynchCount); + phy->phy_reset_problem_count = + le32_to_cpu(phy_pg1.PhyResetProblemCount); + return 0; +} + +/** + * transport_get_enclosure_identifier - + * @phy: The sas phy object + * + * Obtain the enclosure logical id for an expander. + * Returns 0 for success, non-zero for failure. + */ +static int +transport_get_enclosure_identifier(struct sas_rphy *rphy, u64 *identifier) +{ + struct MPT2SAS_ADAPTER *ioc = rphy_to_ioc(rphy); + struct _sas_node *sas_expander; + unsigned long flags; + + spin_lock_irqsave(&ioc->sas_node_lock, flags); + sas_expander = mpt2sas_scsih_expander_find_by_sas_address(ioc, + rphy->identify.sas_address); + spin_unlock_irqrestore(&ioc->sas_node_lock, flags); + + if (!sas_expander) + return -ENXIO; + + *identifier = sas_expander->enclosure_logical_id; + return 0; +} + +/** + * transport_get_bay_identifier - + * @phy: The sas phy object + * + * Returns the slot id for a device that resides inside an enclosure. + */ +static int +transport_get_bay_identifier(struct sas_rphy *rphy) +{ + struct MPT2SAS_ADAPTER *ioc = rphy_to_ioc(rphy); + struct _sas_device *sas_device; + unsigned long flags; + + spin_lock_irqsave(&ioc->sas_device_lock, flags); + sas_device = mpt2sas_scsih_sas_device_find_by_sas_address(ioc, + rphy->identify.sas_address); + spin_unlock_irqrestore(&ioc->sas_device_lock, flags); + + if (!sas_device) + return -ENXIO; + + return sas_device->slot; +} + +/** + * transport_phy_reset - + * @phy: The sas phy object + * @hard_reset: + * + * Only support sas_host direct attached phys. + * Returns 0 for success, non-zero for failure. + */ +static int +transport_phy_reset(struct sas_phy *phy, int hard_reset) +{ + struct MPT2SAS_ADAPTER *ioc = phy_to_ioc(phy); + struct _sas_phy *mpt2sas_phy; + Mpi2SasIoUnitControlReply_t mpi_reply; + Mpi2SasIoUnitControlRequest_t mpi_request; + int i; + + for (i = 0, mpt2sas_phy = NULL; i < ioc->sas_hba.num_phys && + !mpt2sas_phy; i++) { + if (ioc->sas_hba.phy[i].phy != phy) + continue; + mpt2sas_phy = &ioc->sas_hba.phy[i]; + } + + if (!mpt2sas_phy) /* this phy not on sas_host */ + return -EINVAL; + + memset(&mpi_request, 0, sizeof(Mpi2SasIoUnitControlReply_t)); + mpi_request.Function = MPI2_FUNCTION_SAS_IO_UNIT_CONTROL; + mpi_request.Operation = hard_reset ? + MPI2_SAS_OP_PHY_HARD_RESET : MPI2_SAS_OP_PHY_LINK_RESET; + mpi_request.PhyNum = mpt2sas_phy->phy_id; + + if ((mpt2sas_base_sas_iounit_control(ioc, &mpi_reply, &mpi_request))) { + printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", + ioc->name, __FILE__, __LINE__, __func__); + return -ENXIO; + } + + if (mpi_reply.IOCStatus || mpi_reply.IOCLogInfo) + printk(MPT2SAS_INFO_FMT "phy(%d), ioc_status" + "(0x%04x), loginfo(0x%08x)\n", ioc->name, + mpt2sas_phy->phy_id, + le16_to_cpu(mpi_reply.IOCStatus), + le32_to_cpu(mpi_reply.IOCLogInfo)); + + return 0; +} + +/** + * transport_smp_handler - transport portal for smp passthru + * @shost: shost object + * @rphy: sas transport rphy object + * @req: + * + * This used primarily for smp_utils. + * Example: + * smp_rep_general /sys/class/bsg/expander-5:0 + */ +static int +transport_smp_handler(struct Scsi_Host *shost, struct sas_rphy *rphy, + struct request *req) +{ + struct MPT2SAS_ADAPTER *ioc = shost_priv(shost); + Mpi2SmpPassthroughRequest_t *mpi_request; + Mpi2SmpPassthroughReply_t *mpi_reply; + int rc; + u16 smid; + u32 ioc_state; + unsigned long timeleft; + void *psge; + u32 sgl_flags; + u8 issue_reset = 0; + unsigned long flags; + dma_addr_t dma_addr_in = 0; + dma_addr_t dma_addr_out = 0; + u16 wait_state_count; + struct request *rsp = req->next_rq; + + if (!rsp) { + printk(MPT2SAS_ERR_FMT "%s: the smp response space is " + "missing\n", ioc->name, __func__); + return -EINVAL; + } + + /* do we need to support multiple segments? */ + if (req->bio->bi_vcnt > 1 || rsp->bio->bi_vcnt > 1) { + printk(MPT2SAS_ERR_FMT "%s: multiple segments req %u %u, " + "rsp %u %u\n", ioc->name, __func__, req->bio->bi_vcnt, + req->data_len, rsp->bio->bi_vcnt, rsp->data_len); + return -EINVAL; + } + + spin_lock_irqsave(&ioc->ioc_reset_in_progress_lock, flags); + if (ioc->ioc_reset_in_progress) { + spin_unlock_irqrestore(&ioc->ioc_reset_in_progress_lock, flags); + printk(MPT2SAS_INFO_FMT "%s: host reset in progress!\n", + __func__, ioc->name); + return -EFAULT; + } + spin_unlock_irqrestore(&ioc->ioc_reset_in_progress_lock, flags); + + rc = mutex_lock_interruptible(&ioc->transport_cmds.mutex); + if (rc) + return rc; + + if (ioc->transport_cmds.status != MPT2_CMD_NOT_USED) { + printk(MPT2SAS_ERR_FMT "%s: transport_cmds in use\n", ioc->name, + __func__); + rc = -EAGAIN; + goto out; + } + ioc->transport_cmds.status = MPT2_CMD_PENDING; + + wait_state_count = 0; + ioc_state = mpt2sas_base_get_iocstate(ioc, 1); + while (ioc_state != MPI2_IOC_STATE_OPERATIONAL) { + if (wait_state_count++ == 10) { + printk(MPT2SAS_ERR_FMT + "%s: failed due to ioc not operational\n", + ioc->name, __func__); + rc = -EFAULT; + goto out; + } + ssleep(1); + ioc_state = mpt2sas_base_get_iocstate(ioc, 1); + printk(MPT2SAS_INFO_FMT "%s: waiting for " + "operational state(count=%d)\n", ioc->name, + __func__, wait_state_count); + } + if (wait_state_count) + printk(MPT2SAS_INFO_FMT "%s: ioc is operational\n", + ioc->name, __func__); + + smid = mpt2sas_base_get_smid(ioc, ioc->transport_cb_idx); + if (!smid) { + printk(MPT2SAS_ERR_FMT "%s: failed obtaining a smid\n", + ioc->name, __func__); + rc = -EAGAIN; + goto out; + } + + rc = 0; + mpi_request = mpt2sas_base_get_msg_frame(ioc, smid); + ioc->transport_cmds.smid = smid; + + memset(mpi_request, 0, sizeof(Mpi2SmpPassthroughRequest_t)); + mpi_request->Function = MPI2_FUNCTION_SMP_PASSTHROUGH; + mpi_request->PhysicalPort = 0xFF; + *((u64 *)&mpi_request->SASAddress) = (rphy) ? + cpu_to_le64(rphy->identify.sas_address) : + cpu_to_le64(ioc->sas_hba.sas_address); + mpi_request->RequestDataLength = cpu_to_le16(req->data_len - 4); + psge = &mpi_request->SGL; + + /* WRITE sgel first */ + sgl_flags = (MPI2_SGE_FLAGS_SIMPLE_ELEMENT | + MPI2_SGE_FLAGS_END_OF_BUFFER | MPI2_SGE_FLAGS_HOST_TO_IOC); + sgl_flags = sgl_flags << MPI2_SGE_FLAGS_SHIFT; + dma_addr_out = pci_map_single(ioc->pdev, bio_data(req->bio), + req->data_len, PCI_DMA_BIDIRECTIONAL); + if (!dma_addr_out) { + mpt2sas_base_free_smid(ioc, le16_to_cpu(smid)); + goto unmap; + } + + ioc->base_add_sg_single(psge, sgl_flags | (req->data_len - 4), + dma_addr_out); + + /* incr sgel */ + psge += ioc->sge_size; + + /* READ sgel last */ + sgl_flags = (MPI2_SGE_FLAGS_SIMPLE_ELEMENT | + MPI2_SGE_FLAGS_LAST_ELEMENT | MPI2_SGE_FLAGS_END_OF_BUFFER | + MPI2_SGE_FLAGS_END_OF_LIST); + sgl_flags = sgl_flags << MPI2_SGE_FLAGS_SHIFT; + dma_addr_in = pci_map_single(ioc->pdev, bio_data(rsp->bio), + rsp->data_len, PCI_DMA_BIDIRECTIONAL); + if (!dma_addr_in) { + mpt2sas_base_free_smid(ioc, le16_to_cpu(smid)); + goto unmap; + } + + ioc->base_add_sg_single(psge, sgl_flags | (rsp->data_len + 4), + dma_addr_in); + + dtransportprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s - " + "sending smp request\n", ioc->name, __func__)); + + mpt2sas_base_put_smid_default(ioc, smid, 0 /* VF_ID */); + timeleft = wait_for_completion_timeout(&ioc->transport_cmds.done, + 10*HZ); + + if (!(ioc->transport_cmds.status & MPT2_CMD_COMPLETE)) { + printk(MPT2SAS_ERR_FMT "%s : timeout\n", + __func__, ioc->name); + _debug_dump_mf(mpi_request, + sizeof(Mpi2SmpPassthroughRequest_t)/4); + if (!(ioc->transport_cmds.status & MPT2_CMD_RESET)) + issue_reset = 1; + goto issue_host_reset; + } + + dtransportprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s - " + "complete\n", ioc->name, __func__)); + + if (ioc->transport_cmds.status & MPT2_CMD_REPLY_VALID) { + + mpi_reply = ioc->transport_cmds.reply; + + dtransportprintk(ioc, printk(MPT2SAS_DEBUG_FMT + "%s - reply data transfer size(%d)\n", + ioc->name, __func__, + le16_to_cpu(mpi_reply->ResponseDataLength))); + + memcpy(req->sense, mpi_reply, sizeof(*mpi_reply)); + req->sense_len = sizeof(*mpi_reply); + req->data_len = 0; + rsp->data_len -= mpi_reply->ResponseDataLength; + + } else { + dtransportprintk(ioc, printk(MPT2SAS_DEBUG_FMT + "%s - no reply\n", ioc->name, __func__)); + rc = -ENXIO; + } + + issue_host_reset: + if (issue_reset) { + mpt2sas_base_hard_reset_handler(ioc, CAN_SLEEP, + FORCE_BIG_HAMMER); + rc = -ETIMEDOUT; + } + + unmap: + if (dma_addr_out) + pci_unmap_single(ioc->pdev, dma_addr_out, req->data_len, + PCI_DMA_BIDIRECTIONAL); + if (dma_addr_in) + pci_unmap_single(ioc->pdev, dma_addr_in, rsp->data_len, + PCI_DMA_BIDIRECTIONAL); + + out: + ioc->transport_cmds.status = MPT2_CMD_NOT_USED; + mutex_unlock(&ioc->transport_cmds.mutex); + return rc; +} + +struct sas_function_template mpt2sas_transport_functions = { + .get_linkerrors = transport_get_linkerrors, + .get_enclosure_identifier = transport_get_enclosure_identifier, + .get_bay_identifier = transport_get_bay_identifier, + .phy_reset = transport_phy_reset, + .smp_handler = transport_smp_handler, +}; + +struct scsi_transport_template *mpt2sas_transport_template; -- cgit v0.10.2 From 0da205e01bc58cfad660659e3c901223d3596c57 Mon Sep 17 00:00:00 2001 From: Matthew Wilcox Date: Thu, 12 Mar 2009 14:20:29 -0400 Subject: [SCSI] sd: Refactor sd_read_capacity() The sd_read_capacity() function was about 180 lines long and included a backwards goto and a tricky state variable. Splitting out read_capacity_10() and read_capacity_16() (about 50 lines each) reduces sd_read_capacity to about 100 lines and gets rid of the backwards goto and the state variable. I've tried to avoid any behaviour change with this patch. [jejb: upped transfer request to standard recommended 32 for RC16] Signed-off-by: Matthew Wilcox Signed-off-by: James Bottomley diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c index e744ee4..dcff84a 100644 --- a/drivers/scsi/sd.c +++ b/drivers/scsi/sd.c @@ -1273,42 +1273,61 @@ disable: sdkp->capacity = 0; } -/* - * read disk capacity - */ -static void -sd_read_capacity(struct scsi_disk *sdkp, unsigned char *buffer) +static void read_capacity_error(struct scsi_disk *sdkp, struct scsi_device *sdp, + struct scsi_sense_hdr *sshdr, int sense_valid, + int the_result) +{ + sd_print_result(sdkp, the_result); + if (driver_byte(the_result) & DRIVER_SENSE) + sd_print_sense_hdr(sdkp, sshdr); + else + sd_printk(KERN_NOTICE, sdkp, "Sense not available.\n"); + + /* + * Set dirty bit for removable devices if not ready - + * sometimes drives will not report this properly. + */ + if (sdp->removable && + sense_valid && sshdr->sense_key == NOT_READY) + sdp->changed = 1; + + /* + * We used to set media_present to 0 here to indicate no media + * in the drive, but some drives fail read capacity even with + * media present, so we can't do that. + */ + sdkp->capacity = 0; /* unknown mapped to zero - as usual */ +} + +#define RC16_LEN 32 +#if RC16_LEN > SD_BUF_SIZE +#error RC16_LEN must not be more than SD_BUF_SIZE +#endif + +static int read_capacity_16(struct scsi_disk *sdkp, struct scsi_device *sdp, + unsigned char *buffer) { unsigned char cmd[16]; - int the_result, retries; - int sector_size = 0; - /* Force READ CAPACITY(16) when PROTECT=1 */ - int longrc = scsi_device_protection(sdkp->device) ? 1 : 0; struct scsi_sense_hdr sshdr; int sense_valid = 0; - struct scsi_device *sdp = sdkp->device; + int the_result; + int retries = 3; + unsigned long long lba; + unsigned sector_size; -repeat: - retries = 3; do { - if (longrc) { - memset((void *) cmd, 0, 16); - cmd[0] = SERVICE_ACTION_IN; - cmd[1] = SAI_READ_CAPACITY_16; - cmd[13] = 13; - memset((void *) buffer, 0, 13); - } else { - cmd[0] = READ_CAPACITY; - memset((void *) &cmd[1], 0, 9); - memset((void *) buffer, 0, 8); - } - + memset(cmd, 0, 16); + cmd[0] = SERVICE_ACTION_IN; + cmd[1] = SAI_READ_CAPACITY_16; + cmd[13] = RC16_LEN; + memset(buffer, 0, RC16_LEN); + the_result = scsi_execute_req(sdp, cmd, DMA_FROM_DEVICE, - buffer, longrc ? 13 : 8, &sshdr, - SD_TIMEOUT, SD_MAX_RETRIES, NULL); + buffer, RC16_LEN, &sshdr, + SD_TIMEOUT, SD_MAX_RETRIES, NULL); if (media_not_present(sdkp, &sshdr)) - return; + return -ENODEV; if (the_result) sense_valid = scsi_sense_valid(&sshdr); @@ -1316,72 +1335,122 @@ repeat: } while (the_result && retries); - if (the_result && !longrc) { + if (the_result) { + sd_printk(KERN_NOTICE, sdkp, "READ CAPACITY(16) failed\n"); + read_capacity_error(sdkp, sdp, &sshdr, sense_valid, the_result); + return -EINVAL; + } + + sector_size = (buffer[8] << 24) | (buffer[9] << 16) | + (buffer[10] << 8) | buffer[11]; + lba = (((u64)buffer[0] << 56) | ((u64)buffer[1] << 48) | + ((u64)buffer[2] << 40) | ((u64)buffer[3] << 32) | + ((u64)buffer[4] << 24) | ((u64)buffer[5] << 16) | + ((u64)buffer[6] << 8) | (u64)buffer[7]); + + sd_read_protection_type(sdkp, buffer); + + if ((sizeof(sdkp->capacity) == 4) && (lba >= 0xffffffffULL)) { + sd_printk(KERN_ERR, sdkp, "Too big for this kernel. Use a " + "kernel compiled with support for large block " + "devices.\n"); + sdkp->capacity = 0; + return -EOVERFLOW; + } + + sdkp->capacity = lba + 1; + return sector_size; +} + +static int read_capacity_10(struct scsi_disk *sdkp, struct scsi_device *sdp, + unsigned char *buffer) +{ + unsigned char cmd[16]; + struct scsi_sense_hdr sshdr; + int sense_valid = 0; + int the_result; + int retries = 3; + sector_t lba; + unsigned sector_size; + + do { + cmd[0] = READ_CAPACITY; + memset(&cmd[1], 0, 9); + memset(buffer, 0, 8); + + the_result = scsi_execute_req(sdp, cmd, DMA_FROM_DEVICE, + buffer, 8, &sshdr, + SD_TIMEOUT, SD_MAX_RETRIES, NULL); + + if (media_not_present(sdkp, &sshdr)) + return -ENODEV; + + if (the_result) + sense_valid = scsi_sense_valid(&sshdr); + retries--; + + } while (the_result && retries); + + if (the_result) { sd_printk(KERN_NOTICE, sdkp, "READ CAPACITY failed\n"); - sd_print_result(sdkp, the_result); - if (driver_byte(the_result) & DRIVER_SENSE) - sd_print_sense_hdr(sdkp, &sshdr); - else - sd_printk(KERN_NOTICE, sdkp, "Sense not available.\n"); + read_capacity_error(sdkp, sdp, &sshdr, sense_valid, the_result); + return -EINVAL; + } - /* Set dirty bit for removable devices if not ready - - * sometimes drives will not report this properly. */ - if (sdp->removable && - sense_valid && sshdr.sense_key == NOT_READY) - sdp->changed = 1; + sector_size = (buffer[4] << 24) | (buffer[5] << 16) | + (buffer[6] << 8) | buffer[7]; + lba = (buffer[0] << 24) | (buffer[1] << 16) | + (buffer[2] << 8) | buffer[3]; - /* Either no media are present but the drive didn't tell us, - or they are present but the read capacity command fails */ - /* sdkp->media_present = 0; -- not always correct */ - sdkp->capacity = 0; /* unknown mapped to zero - as usual */ + if ((sizeof(sdkp->capacity) == 4) && (lba == 0xffffffff)) { + sd_printk(KERN_ERR, sdkp, "Too big for this kernel. Use a " + "kernel compiled with support for large block " + "devices.\n"); + sdkp->capacity = 0; + return -EOVERFLOW; + } - return; - } else if (the_result && longrc) { - /* READ CAPACITY(16) has been failed */ - sd_printk(KERN_NOTICE, sdkp, "READ CAPACITY(16) failed\n"); - sd_print_result(sdkp, the_result); - sd_printk(KERN_NOTICE, sdkp, "Use 0xffffffff as device size\n"); + sdkp->capacity = lba + 1; + return sector_size; +} - sdkp->capacity = 1 + (sector_t) 0xffffffff; - goto got_data; - } - - if (!longrc) { - sector_size = (buffer[4] << 24) | - (buffer[5] << 16) | (buffer[6] << 8) | buffer[7]; - if (buffer[0] == 0xff && buffer[1] == 0xff && - buffer[2] == 0xff && buffer[3] == 0xff) { - if(sizeof(sdkp->capacity) > 4) { - sd_printk(KERN_NOTICE, sdkp, "Very big device. " - "Trying to use READ CAPACITY(16).\n"); - longrc = 1; - goto repeat; - } - sd_printk(KERN_ERR, sdkp, "Too big for this kernel. Use " - "a kernel compiled with support for large " - "block devices.\n"); - sdkp->capacity = 0; +/* + * read disk capacity + */ +static void +sd_read_capacity(struct scsi_disk *sdkp, unsigned char *buffer) +{ + int sector_size; + struct scsi_device *sdp = sdkp->device; + + /* Force READ CAPACITY(16) when PROTECT=1 */ + if (scsi_device_protection(sdp)) { + sector_size = read_capacity_16(sdkp, sdp, buffer); + if (sector_size == -EOVERFLOW) goto got_data; - } - sdkp->capacity = 1 + (((sector_t)buffer[0] << 24) | - (buffer[1] << 16) | - (buffer[2] << 8) | - buffer[3]); + if (sector_size < 0) + return; } else { - sdkp->capacity = 1 + (((u64)buffer[0] << 56) | - ((u64)buffer[1] << 48) | - ((u64)buffer[2] << 40) | - ((u64)buffer[3] << 32) | - ((sector_t)buffer[4] << 24) | - ((sector_t)buffer[5] << 16) | - ((sector_t)buffer[6] << 8) | - (sector_t)buffer[7]); - - sector_size = (buffer[8] << 24) | - (buffer[9] << 16) | (buffer[10] << 8) | buffer[11]; - - sd_read_protection_type(sdkp, buffer); - } + sector_size = read_capacity_10(sdkp, sdp, buffer); + if (sector_size == -EOVERFLOW) + goto got_data; + if (sector_size < 0) + return; + if ((sizeof(sdkp->capacity) > 4) && + (sdkp->capacity > 0xffffffffULL)) { + int old_sector_size = sector_size; + sd_printk(KERN_NOTICE, sdkp, "Very big device. " + "Trying to use READ CAPACITY(16).\n"); + sector_size = read_capacity_16(sdkp, sdp, buffer); + if (sector_size < 0) { + sd_printk(KERN_NOTICE, sdkp, + "Using 0xffffffff as device size\n"); + sdkp->capacity = 1 + (sector_t) 0xffffffff; + sector_size = old_sector_size; + goto got_data; + } + } + } /* Some devices are known to return the total number of blocks, * not the highest block number. Some devices have versions -- cgit v0.10.2 From 2b301307f63dbecf06d91f58f003c7fb7addee24 Mon Sep 17 00:00:00 2001 From: Matthew Wilcox Date: Thu, 12 Mar 2009 14:20:30 -0400 Subject: [SCSI] sd: Try READ CAPACITY 16 first for SBC-2 devices New features are being added to the READ CAPACITY 16 results, so we want to issue it in preference to READ CAPACITY 10. Unfortunately, some devices misbehave when they see a READ CAPACITY 16, so we restrict this command to devices which claim conformance to SPC-3 (aka SBC-2), or claim they have features which are only reported in the READ CAPACITY 16 data. The READ CAPACITY 16 command is optional, even for SBC-2 devices, so we fall back to READ CAPACITY 10 if READ CAPACITY 16 fails. [jejb: don't error if device supports SBC-2 but doesn't support RC16] Signed-off-by: Matthew Wilcox Tested-by: Martin K. Petersen Signed-off-by: James Bottomley diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c index dcff84a..8eebaa8 100644 --- a/drivers/scsi/sd.c +++ b/drivers/scsi/sd.c @@ -1329,8 +1329,17 @@ static int read_capacity_16(struct scsi_disk *sdkp, struct scsi_device *sdp, if (media_not_present(sdkp, &sshdr)) return -ENODEV; - if (the_result) + if (the_result) { sense_valid = scsi_sense_valid(&sshdr); + if (sense_valid && + sshdr.sense_key == ILLEGAL_REQUEST && + (sshdr.asc == 0x20 || sshdr.asc == 0x24) && + sshdr.ascq == 0x00) + /* Invalid Command Operation Code or + * Invalid Field in CDB, just retry + * silently with RC10 */ + return -EINVAL; + } retries--; } while (the_result && retries); @@ -1414,6 +1423,15 @@ static int read_capacity_10(struct scsi_disk *sdkp, struct scsi_device *sdp, return sector_size; } +static int sd_try_rc16_first(struct scsi_device *sdp) +{ + if (sdp->scsi_level > SCSI_SPC_2) + return 1; + if (scsi_device_protection(sdp)) + return 1; + return 0; +} + /* * read disk capacity */ @@ -1423,11 +1441,14 @@ sd_read_capacity(struct scsi_disk *sdkp, unsigned char *buffer) int sector_size; struct scsi_device *sdp = sdkp->device; - /* Force READ CAPACITY(16) when PROTECT=1 */ - if (scsi_device_protection(sdp)) { + if (sd_try_rc16_first(sdp)) { sector_size = read_capacity_16(sdkp, sdp, buffer); if (sector_size == -EOVERFLOW) goto got_data; + if (sector_size == -ENODEV) + return; + if (sector_size < 0) + sector_size = read_capacity_10(sdkp, sdp, buffer); if (sector_size < 0) return; } else { -- cgit v0.10.2 From 70a9b8734660698eb91efb8947a9e691d40235e1 Mon Sep 17 00:00:00 2001 From: "Martin K. Petersen" Date: Mon, 9 Mar 2009 11:33:31 -0400 Subject: [SCSI] sd: Make revalidate less chatty sd_revalidate ends up being called several times during device setup. With this patch we print everything during the first scan. Subsequent invocations will only print a message if the parameter in question has actually changed (LUN capacity has increased, etc.). Signed-off-by: Martin K. Petersen Signed-off-by: James Bottomley diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c index 8eebaa8..aeab5d9 100644 --- a/drivers/scsi/sd.c +++ b/drivers/scsi/sd.c @@ -1440,6 +1440,7 @@ sd_read_capacity(struct scsi_disk *sdkp, unsigned char *buffer) { int sector_size; struct scsi_device *sdp = sdkp->device; + sector_t old_capacity = sdkp->capacity; if (sd_try_rc16_first(sdp)) { sector_size = read_capacity_16(sdkp, sdp, buffer); @@ -1531,10 +1532,11 @@ got_data: string_get_size(sz, STRING_UNITS_10, cap_str_10, sizeof(cap_str_10)); - sd_printk(KERN_NOTICE, sdkp, - "%llu %d-byte hardware sectors: (%s/%s)\n", - (unsigned long long)sdkp->capacity, - sector_size, cap_str_10, cap_str_2); + if (sdkp->first_scan || old_capacity != sdkp->capacity) + sd_printk(KERN_NOTICE, sdkp, + "%llu %d-byte hardware sectors: (%s/%s)\n", + (unsigned long long)sdkp->capacity, + sector_size, cap_str_10, cap_str_2); } /* Rescale capacity to 512-byte units */ @@ -1571,6 +1573,7 @@ sd_read_write_protect_flag(struct scsi_disk *sdkp, unsigned char *buffer) int res; struct scsi_device *sdp = sdkp->device; struct scsi_mode_data data; + int old_wp = sdkp->write_prot; set_disk_ro(sdkp->disk, 0); if (sdp->skip_ms_page_3f) { @@ -1611,11 +1614,13 @@ sd_read_write_protect_flag(struct scsi_disk *sdkp, unsigned char *buffer) } else { sdkp->write_prot = ((data.device_specific & 0x80) != 0); set_disk_ro(sdkp->disk, sdkp->write_prot); - sd_printk(KERN_NOTICE, sdkp, "Write Protect is %s\n", - sdkp->write_prot ? "on" : "off"); - sd_printk(KERN_DEBUG, sdkp, - "Mode Sense: %02x %02x %02x %02x\n", - buffer[0], buffer[1], buffer[2], buffer[3]); + if (sdkp->first_scan || old_wp != sdkp->write_prot) { + sd_printk(KERN_NOTICE, sdkp, "Write Protect is %s\n", + sdkp->write_prot ? "on" : "off"); + sd_printk(KERN_DEBUG, sdkp, + "Mode Sense: %02x %02x %02x %02x\n", + buffer[0], buffer[1], buffer[2], buffer[3]); + } } } @@ -1633,6 +1638,9 @@ sd_read_cache_type(struct scsi_disk *sdkp, unsigned char *buffer) int modepage; struct scsi_mode_data data; struct scsi_sense_hdr sshdr; + int old_wce = sdkp->WCE; + int old_rcd = sdkp->RCD; + int old_dpofua = sdkp->DPOFUA; if (sdp->skip_ms_page_8) goto defaults; @@ -1704,12 +1712,14 @@ sd_read_cache_type(struct scsi_disk *sdkp, unsigned char *buffer) sdkp->DPOFUA = 0; } - sd_printk(KERN_NOTICE, sdkp, - "Write cache: %s, read cache: %s, %s\n", - sdkp->WCE ? "enabled" : "disabled", - sdkp->RCD ? "disabled" : "enabled", - sdkp->DPOFUA ? "supports DPO and FUA" - : "doesn't support DPO or FUA"); + if (sdkp->first_scan || old_wce != sdkp->WCE || + old_rcd != sdkp->RCD || old_dpofua != sdkp->DPOFUA) + sd_printk(KERN_NOTICE, sdkp, + "Write cache: %s, read cache: %s, %s\n", + sdkp->WCE ? "enabled" : "disabled", + sdkp->RCD ? "disabled" : "enabled", + sdkp->DPOFUA ? "supports DPO and FUA" + : "doesn't support DPO or FUA"); return; } @@ -1805,15 +1815,6 @@ static int sd_revalidate_disk(struct gendisk *disk) goto out; } - /* defaults, until the device tells us otherwise */ - sdp->sector_size = 512; - sdkp->capacity = 0; - sdkp->media_present = 1; - sdkp->write_prot = 0; - sdkp->WCE = 0; - sdkp->RCD = 0; - sdkp->ATO = 0; - sd_spinup_disk(sdkp); /* @@ -1827,6 +1828,8 @@ static int sd_revalidate_disk(struct gendisk *disk) sd_read_app_tag_own(sdkp, buffer); } + sdkp->first_scan = 0; + /* * We now have all cache related info, determine how we deal * with ordered requests. Note that as the current SCSI @@ -1937,6 +1940,16 @@ static void sd_probe_async(void *data, async_cookie_t cookie) gd->private_data = &sdkp->driver; gd->queue = sdkp->device->request_queue; + /* defaults, until the device tells us otherwise */ + sdp->sector_size = 512; + sdkp->capacity = 0; + sdkp->media_present = 1; + sdkp->write_prot = 0; + sdkp->WCE = 0; + sdkp->RCD = 0; + sdkp->ATO = 0; + sdkp->first_scan = 1; + sd_revalidate_disk(gd); blk_queue_prep_rq(sdp->request_queue, sd_prep_fn); diff --git a/drivers/scsi/sd.h b/drivers/scsi/sd.h index 75638e7..708778c 100644 --- a/drivers/scsi/sd.h +++ b/drivers/scsi/sd.h @@ -53,6 +53,7 @@ struct scsi_disk { unsigned WCE : 1; /* state of disk WCE bit */ unsigned RCD : 1; /* state of disk RCD bit, unused */ unsigned DPOFUA : 1; /* state of disk DPOFUA bit */ + unsigned first_scan : 1; }; #define to_scsi_disk(obj) container_of(obj,struct scsi_disk,dev) -- cgit v0.10.2 From ba33fadfabe88e838e73c76a6ff59546f5f6b92b Mon Sep 17 00:00:00 2001 From: Eric Moore Date: Sun, 15 Mar 2009 21:37:18 -0600 Subject: [SCSI] mpt2sas: make global symbols unique The ioc_list global symbol is already used in 1st generation mpt fusion drivers, so this patch makes it unique in the 2nd generation driver. I've checked the entire sources, and I don't see any other global system missing the mpt2sas_xxx prefix. Signed-off-by: Eric Moore Signed-off-by: James Bottomley diff --git a/drivers/scsi/mpt2sas/mpt2sas_base.h b/drivers/scsi/mpt2sas/mpt2sas_base.h index 11fc17f..6945ff4 100644 --- a/drivers/scsi/mpt2sas/mpt2sas_base.h +++ b/drivers/scsi/mpt2sas/mpt2sas_base.h @@ -68,11 +68,11 @@ #define MPT2SAS_DRIVER_NAME "mpt2sas" #define MPT2SAS_AUTHOR "LSI Corporation " #define MPT2SAS_DESCRIPTION "LSI MPT Fusion SAS 2.0 Device Driver" -#define MPT2SAS_DRIVER_VERSION "00.100.11.15" +#define MPT2SAS_DRIVER_VERSION "00.100.11.16" #define MPT2SAS_MAJOR_VERSION 00 #define MPT2SAS_MINOR_VERSION 100 #define MPT2SAS_BUILD_VERSION 11 -#define MPT2SAS_RELEASE_VERSION 15 +#define MPT2SAS_RELEASE_VERSION 16 /* * Set MPT2SAS_SG_DEPTH value based on user input. @@ -647,7 +647,7 @@ typedef void (*MPT_CALLBACK)(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 VF_ID, /* base shared API */ -extern struct list_head ioc_list; +extern struct list_head mpt2sas_ioc_list; int mpt2sas_base_attach(struct MPT2SAS_ADAPTER *ioc); void mpt2sas_base_detach(struct MPT2SAS_ADAPTER *ioc); diff --git a/drivers/scsi/mpt2sas/mpt2sas_ctl.c b/drivers/scsi/mpt2sas/mpt2sas_ctl.c index 4fbe3f8..2d4f85c 100644 --- a/drivers/scsi/mpt2sas/mpt2sas_ctl.c +++ b/drivers/scsi/mpt2sas/mpt2sas_ctl.c @@ -355,7 +355,7 @@ _ctl_verify_adapter(int ioc_number, struct MPT2SAS_ADAPTER **iocpp) { struct MPT2SAS_ADAPTER *ioc; - list_for_each_entry(ioc, &ioc_list, list) { + list_for_each_entry(ioc, &mpt2sas_ioc_list, list) { if (ioc->id != ioc_number) continue; *iocpp = ioc; @@ -439,7 +439,7 @@ _ctl_poll(struct file *filep, poll_table *wait) poll_wait(filep, &ctl_poll_wait, wait); - list_for_each_entry(ioc, &ioc_list, list) { + list_for_each_entry(ioc, &mpt2sas_ioc_list, list) { if (ioc->aen_event_read_flag) return POLLIN | POLLRDNORM; } @@ -2497,7 +2497,7 @@ mpt2sas_ctl_exit(void) struct MPT2SAS_ADAPTER *ioc; int i; - list_for_each_entry(ioc, &ioc_list, list) { + list_for_each_entry(ioc, &mpt2sas_ioc_list, list) { /* free memory associated to diag buffers */ for (i = 0; i < MPI2_DIAG_BUF_TYPE_COUNT; i++) { diff --git a/drivers/scsi/mpt2sas/mpt2sas_scsih.c b/drivers/scsi/mpt2sas/mpt2sas_scsih.c index 50865a8..0c463c4 100644 --- a/drivers/scsi/mpt2sas/mpt2sas_scsih.c +++ b/drivers/scsi/mpt2sas/mpt2sas_scsih.c @@ -68,10 +68,9 @@ static void _scsih_expander_node_remove(struct MPT2SAS_ADAPTER *ioc, static void _firmware_event_work(struct work_struct *work); /* global parameters */ -LIST_HEAD(ioc_list); +LIST_HEAD(mpt2sas_ioc_list); /* local parameters */ -static u32 logging_level; static u8 scsi_io_cb_idx = -1; static u8 tm_cb_idx = -1; static u8 ctl_cb_idx = -1; @@ -81,6 +80,7 @@ static u8 config_cb_idx = -1; static int mpt_ids; /* command line options */ +static u32 logging_level; MODULE_PARM_DESC(logging_level, " bits for enabling additional logging info " "(default=0)"); @@ -211,7 +211,7 @@ scsih_set_debug_level(const char *val, struct kernel_param *kp) return ret; printk(KERN_INFO "setting logging_level(0x%08x)\n", logging_level); - list_for_each_entry(ioc, &ioc_list, list) + list_for_each_entry(ioc, &mpt2sas_ioc_list, list) ioc->logging_level = logging_level; return 0; } @@ -5464,7 +5464,7 @@ scsih_probe(struct pci_dev *pdev, const struct pci_device_id *id) ioc = shost_priv(shost); memset(ioc, 0, sizeof(struct MPT2SAS_ADAPTER)); INIT_LIST_HEAD(&ioc->list); - list_add_tail(&ioc->list, &ioc_list); + list_add_tail(&ioc->list, &mpt2sas_ioc_list); ioc->shost = shost; ioc->id = mpt_ids++; sprintf(ioc->name, "%s%d", MPT2SAS_DRIVER_NAME, ioc->id); -- cgit v0.10.2 From af50bb993dfa673cf21ab812efe620d7e0c36319 Mon Sep 17 00:00:00 2001 From: "Chauhan, Vijay" Date: Tue, 17 Mar 2009 18:51:40 +0530 Subject: [SCSI] scsi_dh_rdac: Retry for NOT_READY check condition This patch adds retry for NOT_READY check condition - Quiesce in progress (02/A1/02) Signed-off-by: Vijay Chauhan Signed-off-by: James Bottomley diff --git a/drivers/scsi/device_handler/scsi_dh_rdac.c b/drivers/scsi/device_handler/scsi_dh_rdac.c index 07962f6..43b8c51 100644 --- a/drivers/scsi/device_handler/scsi_dh_rdac.c +++ b/drivers/scsi/device_handler/scsi_dh_rdac.c @@ -574,6 +574,12 @@ static int rdac_check_sense(struct scsi_device *sdev, * Just retry and wait. */ return ADD_TO_MLQUEUE; + if (sense_hdr->asc == 0xA1 && sense_hdr->ascq == 0x02) + /* LUN Not Ready - Quiescense in progress + * or has been achieved + * Just retry. + */ + return ADD_TO_MLQUEUE; break; case ILLEGAL_REQUEST: if (sense_hdr->asc == 0x94 && sense_hdr->ascq == 0x01) { -- cgit v0.10.2