From 88dacbe961aa63fa880b4f6f16515427f61fc3ca Mon Sep 17 00:00:00 2001 From: Willy Tarreau Date: Sat, 17 Feb 2007 18:57:09 +0100 Subject: rio: typo in bitwise AND expression. The line : hp->Mode &= !RIO_PCI_INT_ENABLE; is obviously wrong as RIO_PCI_INT_ENABLE=0x04 and is used as a bitmask 2 lines before. Getting no IRQ would not disable RIO_PCI_INT_ENABLE but rather RIO_PCI_BOOT_FROM_RAM which equals 0x01. Obvious fix is to change ! for ~. Signed-off-by: Willy Tarreau Signed-off-by: Adrian Bunk diff --git a/drivers/char/rio/rio_linux.c b/drivers/char/rio/rio_linux.c index 85c1618..294e9cb 100644 --- a/drivers/char/rio/rio_linux.c +++ b/drivers/char/rio/rio_linux.c @@ -1146,7 +1146,7 @@ static int __init rio_init(void) rio_dprintk(RIO_DEBUG_INIT, "Enabling interrupts on rio card.\n"); hp->Mode |= RIO_PCI_INT_ENABLE; } else - hp->Mode &= !RIO_PCI_INT_ENABLE; + hp->Mode &= ~RIO_PCI_INT_ENABLE; rio_dprintk(RIO_DEBUG_INIT, "New Mode: %x\n", hp->Mode); rio_start_card_running(hp); } -- cgit v0.10.2 From 6340aa61b1f1d9c2aadb20594778a5f849bcbb69 Mon Sep 17 00:00:00 2001 From: "Robert P. J. Day" Date: Sat, 17 Feb 2007 19:05:24 +0100 Subject: kbuild: Replace remaining "depends" with "depends on" Replace the very few remaining "depends" Kconfig directives with "depends on". Signed-off-by: Robert P. J. Day Signed-off-by: Adrian Bunk diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 5c79519..77d062e 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -405,7 +405,7 @@ source arch/arm/mm/Kconfig config IWMMXT bool "Enable iWMMXt support" - depends CPU_XSCALE || CPU_XSC3 + depends on CPU_XSCALE || CPU_XSC3 default y if PXA27x help Enable support for iWMMXt context switching at run time if diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig index aade2f7..3c2f979 100644 --- a/arch/arm/mm/Kconfig +++ b/arch/arm/mm/Kconfig @@ -525,7 +525,7 @@ config CPU_BIG_ENDIAN of your chipset/board/processor. config CPU_HIGH_VECTOR - depends !MMU && CPU_CP15 && !CPU_ARM740T + depends on !MMU && CPU_CP15 && !CPU_ARM740T bool "Select the High exception vector" default n help diff --git a/arch/v850/Kconfig b/arch/v850/Kconfig index dbfab8f..50ccc7f 100644 --- a/arch/v850/Kconfig +++ b/arch/v850/Kconfig @@ -217,7 +217,7 @@ menu "Processor type and features" # Some platforms pre-zero memory, in which case the kernel doesn't need to config ZERO_BSS bool - depends !V850E2_SIM85E2C + depends on !V850E2_SIM85E2C default y # The crappy-ass zone allocator requires that the start of allocatable -- cgit v0.10.2 From d08df601a30df9e36c29f3214315f4f0c8784c68 Mon Sep 17 00:00:00 2001 From: "Robert P. J. Day" Date: Sat, 17 Feb 2007 19:07:33 +0100 Subject: Various typo fixes. Correct mis-spellings of "algorithm", "appear", "consistent" and (shame, shame) "kernel". Signed-off-by: Robert P. J. Day Signed-off-by: Adrian Bunk diff --git a/Documentation/video4linux/bttv/Insmod-options b/Documentation/video4linux/bttv/Insmod-options index bb7c2ca..5ef7578 100644 --- a/Documentation/video4linux/bttv/Insmod-options +++ b/Documentation/video4linux/bttv/Insmod-options @@ -57,7 +57,7 @@ bttv.o i2c_udelay= Allow reduce I2C speed. Default is 5 usecs (meaning 66,67 Kbps). The default is the maximum supported speed by kernel bitbang - algoritm. You may use lower numbers, if I2C + algorithm. You may use lower numbers, if I2C messages are lost (16 is known to work on all supported cards). diff --git a/arch/m32r/lib/usercopy.c b/arch/m32r/lib/usercopy.c index 896cef1..82abd15 100644 --- a/arch/m32r/lib/usercopy.c +++ b/arch/m32r/lib/usercopy.c @@ -293,7 +293,7 @@ long strnlen_user(const char __user *s, long n) : "0" (n), "1" (s), "r" (n & 3), "r" (mask), "r"(0x01010101) : "r0", "r1", "cbit"); - /* NOTE: strnlen_user() algorism: + /* NOTE: strnlen_user() algorithm: * { * char *p; * for (p = s; n-- && *p != '\0'; ++p) @@ -369,7 +369,7 @@ long strnlen_user(const char __user *s, long n) : "0" (n), "1" (s), "r" (n & 3), "r" (mask), "r"(0x01010101) : "r0", "r1", "r2", "r3", "cbit"); - /* NOTE: strnlen_user() algorism: + /* NOTE: strnlen_user() algorithm: * { * char *p; * for (p = s; n-- && *p != '\0'; ++p) diff --git a/arch/m68knommu/platform/5307/timers.c b/arch/m68knommu/platform/5307/timers.c index 87b112b..92e5807 100644 --- a/arch/m68knommu/platform/5307/timers.c +++ b/arch/m68knommu/platform/5307/timers.c @@ -104,7 +104,7 @@ unsigned long coldfire_timer_offset(void) /* * Choose a reasonably fast profile timer. Make it an odd value to - * try and get good coverage of kernal operations. + * try and get good coverage of kernel operations. */ #define PROFILEHZ 1013 diff --git a/drivers/infiniband/hw/ipath/ipath_iba6110.c b/drivers/infiniband/hw/ipath/ipath_iba6110.c index 7468477..9934825 100644 --- a/drivers/infiniband/hw/ipath/ipath_iba6110.c +++ b/drivers/infiniband/hw/ipath/ipath_iba6110.c @@ -1534,7 +1534,7 @@ static int ipath_ht_early_init(struct ipath_devdata *dd) * @kbase: ipath_base_info pointer * * We set the PCIE flag because the lower bandwidth on PCIe vs - * HyperTransport can affect some user packet algorithims. + * HyperTransport can affect some user packet algorithms. */ static int ipath_ht_get_base_info(struct ipath_portdata *pd, void *kbase) { diff --git a/drivers/infiniband/hw/ipath/ipath_iba6120.c b/drivers/infiniband/hw/ipath/ipath_iba6120.c index ae8bf99..05918e1 100644 --- a/drivers/infiniband/hw/ipath/ipath_iba6120.c +++ b/drivers/infiniband/hw/ipath/ipath_iba6120.c @@ -1293,7 +1293,7 @@ int __attribute__((weak)) ipath_unordered_wc(void) * @kbase: ipath_base_info pointer * * We set the PCIE flag because the lower bandwidth on PCIe vs - * HyperTransport can affect some user packet algorithims. + * HyperTransport can affect some user packet algorithms. */ static int ipath_pe_get_base_info(struct ipath_portdata *pd, void *kbase) { diff --git a/drivers/isdn/i4l/isdn_ppp.c b/drivers/isdn/i4l/isdn_ppp.c index 4e3f127..1b2df80 100644 --- a/drivers/isdn/i4l/isdn_ppp.c +++ b/drivers/isdn/i4l/isdn_ppp.c @@ -1680,7 +1680,7 @@ static void isdn_ppp_mp_receive(isdn_net_dev * net_dev, isdn_net_local * lp, * - we hit a gap in the sequence, so no reassembly/processing is * possible ('start' would be set to NULL) * - * algorightm for this code is derived from code in the book + * algorithm for this code is derived from code in the book * 'PPP Design And Debugging' by James Carlson (Addison-Wesley) */ while (start != NULL || newfrag != NULL) { diff --git a/drivers/net/e1000/e1000_hw.h b/drivers/net/e1000/e1000_hw.h index d671058..bd000b80 100644 --- a/drivers/net/e1000/e1000_hw.h +++ b/drivers/net/e1000/e1000_hw.h @@ -3253,7 +3253,7 @@ struct e1000_host_command_info { #define IFE_PMC_AUTO_MDIX 0x0080 /* 1=enable MDI/MDI-X feature, default 0=disabled */ #define IFE_PMC_FORCE_MDIX 0x0040 /* 1=force MDIX-X, 0=force MDI */ #define IFE_PMC_MDIX_STATUS 0x0020 /* 1=MDI-X, 0=MDI */ -#define IFE_PMC_AUTO_MDIX_COMPLETE 0x0010 /* Resolution algorthm is completed */ +#define IFE_PMC_AUTO_MDIX_COMPLETE 0x0010 /* Resolution algorithm is completed */ #define IFE_PMC_MDIX_MODE_SHIFT 6 #define IFE_PHC_MDIX_RESET_ALL_MASK 0x0000 /* Disable auto MDI-X */ diff --git a/drivers/net/wireless/wavelan_cs.c b/drivers/net/wireless/wavelan_cs.c index 5eb8163..b042397 100644 --- a/drivers/net/wireless/wavelan_cs.c +++ b/drivers/net/wireless/wavelan_cs.c @@ -1168,7 +1168,7 @@ wv_mmc_show(struct net_device * dev) m.mmr_unused0[6], m.mmr_unused0[7]); #endif /* DEBUG_SHOW_UNUSED */ - printk(KERN_DEBUG "Encryption algorythm: %02X - Status: %02X\n", + printk(KERN_DEBUG "Encryption algorithm: %02X - Status: %02X\n", m.mmr_des_avail, m.mmr_des_status); #ifdef DEBUG_SHOW_UNUSED printk(KERN_DEBUG "mmc_unused1[]: %02X:%02X:%02X:%02X:%02X\n", @@ -3590,9 +3590,9 @@ wv_82593_config(struct net_device * dev) cfblk.acloc = TRUE; /* Disable source addr insertion by i82593 */ cfblk.preamb_len = 0; /* 2 bytes preamble (SFD) */ cfblk.loopback = FALSE; - cfblk.lin_prio = 0; /* conform to 802.3 backoff algoritm */ - cfblk.exp_prio = 5; /* conform to 802.3 backoff algoritm */ - cfblk.bof_met = 1; /* conform to 802.3 backoff algoritm */ + cfblk.lin_prio = 0; /* conform to 802.3 backoff algorithm */ + cfblk.exp_prio = 5; /* conform to 802.3 backoff algorithm */ + cfblk.bof_met = 1; /* conform to 802.3 backoff algorithm */ cfblk.ifrm_spc = 0x20 >> 4; /* 32 bit times interframe spacing */ cfblk.slottim_low = 0x20 >> 5; /* 32 bit times slot time */ cfblk.slottim_hi = 0x0; diff --git a/drivers/sbus/char/vfc_i2c.c b/drivers/sbus/char/vfc_i2c.c index ceec306..9efed77 100644 --- a/drivers/sbus/char/vfc_i2c.c +++ b/drivers/sbus/char/vfc_i2c.c @@ -14,7 +14,7 @@ /* NOTE: It seems to me that the documentation regarding the pcd8584t/pcf8584 does not show the correct way to address the i2c bus. Based on the information on the I2C bus itself and the remainder of -the Phillips docs the following algorithims apper to be correct. I am +the Phillips docs the following algorithms appear to be correct. I am fairly certain that the flowcharts in the phillips docs are wrong. */ diff --git a/include/linux/seqlock.h b/include/linux/seqlock.h index 6b0648c..52c9eb9 100644 --- a/include/linux/seqlock.h +++ b/include/linux/seqlock.h @@ -2,7 +2,7 @@ #define __LINUX_SEQLOCK_H /* * Reader/writer consistent mechanism without starving writers. This type of - * lock for data where the reader wants a consitent set of information + * lock for data where the reader wants a consistent set of information * and is willing to retry if the information changes. Readers never * block but they may have to retry if a writer is in * progress. Writers do not wait for readers. diff --git a/lib/textsearch.c b/lib/textsearch.c index 9e2a002..88c98a2 100644 --- a/lib/textsearch.c +++ b/lib/textsearch.c @@ -40,7 +40,7 @@ * configuration according to the specified parameters. * (3) User starts the search(es) by calling _find() or _next() to * fetch subsequent occurrences. A state variable is provided - * to the algorihtm to store persistent variables. + * to the algorithm to store persistent variables. * (4) Core eventually resets the search offset and forwards the find() * request to the algorithm. * (5) Algorithm calls get_next_block() provided by the user continously diff --git a/net/ipv4/tcp_cong.c b/net/ipv4/tcp_cong.c index c1b34f1..5c8caf4 100644 --- a/net/ipv4/tcp_cong.c +++ b/net/ipv4/tcp_cong.c @@ -29,7 +29,7 @@ static struct tcp_congestion_ops *tcp_ca_find(const char *name) } /* - * Attach new congestion control algorthim to the list + * Attach new congestion control algorithm to the list * of available options. */ int tcp_register_congestion_control(struct tcp_congestion_ops *ca) -- cgit v0.10.2 From ca820181fc187af316a18b2700582663662c4012 Mon Sep 17 00:00:00 2001 From: "Robert P. J. Day" Date: Sat, 17 Feb 2007 19:10:01 +0100 Subject: Use ARRAY_SIZE() macro in i386 relocs.c file Change the explicit code in the relocs.c file to use ARRAY_SIZE() and add a definition of ARRAY_SIZE() since this is a userspace program and wouldn't include kernel.h. Signed-off-by: Robert P. J. Day Signed-off-by: Adrian Bunk diff --git a/arch/i386/boot/compressed/relocs.c b/arch/i386/boot/compressed/relocs.c index 881951c..ce4fda2 100644 --- a/arch/i386/boot/compressed/relocs.c +++ b/arch/i386/boot/compressed/relocs.c @@ -11,6 +11,7 @@ #include #define MAX_SHDRS 100 +#define ARRAY_SIZE(x) (sizeof(x) / sizeof((x)[0])) static Elf32_Ehdr ehdr; static Elf32_Shdr shdr[MAX_SHDRS]; static Elf32_Sym *symtab[MAX_SHDRS]; @@ -71,7 +72,7 @@ static const char *sym_type(unsigned type) #undef SYM_TYPE }; const char *name = "unknown sym type name"; - if (type < sizeof(type_name)/sizeof(type_name[0])) { + if (type < ARRAY_SIZE(type_name)) { name = type_name[type]; } return name; @@ -87,7 +88,7 @@ static const char *sym_bind(unsigned bind) #undef SYM_BIND }; const char *name = "unknown sym bind name"; - if (bind < sizeof(bind_name)/sizeof(bind_name[0])) { + if (bind < ARRAY_SIZE(bind_name)) { name = bind_name[bind]; } return name; @@ -104,7 +105,7 @@ static const char *sym_visibility(unsigned visibility) #undef SYM_VISIBILITY }; const char *name = "unknown sym visibility name"; - if (visibility < sizeof(visibility_name)/sizeof(visibility_name[0])) { + if (visibility < ARRAY_SIZE(visibility_name)) { name = visibility_name[visibility]; } return name; @@ -128,7 +129,7 @@ static const char *rel_type(unsigned type) #undef REL_TYPE }; const char *name = "unknown type rel type name"; - if (type < sizeof(type_name)/sizeof(type_name[0])) { + if (type < ARRAY_SIZE(type_name)) { name = type_name[type]; } return name; -- cgit v0.10.2 From 405ae7d381302468ecc803f2148a2ae40a04c999 Mon Sep 17 00:00:00 2001 From: "Robert P. J. Day" Date: Sat, 17 Feb 2007 19:13:42 +0100 Subject: Replace remaining references to "driverfs" with "sysfs". Globally, s/driverfs/sysfs/g. Signed-off-by: Robert P. J. Day Signed-off-by: Adrian Bunk diff --git a/arch/i386/kernel/topology.c b/arch/i386/kernel/topology.c index 79cf608..4578235 100644 --- a/arch/i386/kernel/topology.c +++ b/arch/i386/kernel/topology.c @@ -1,5 +1,5 @@ /* - * arch/i386/kernel/topology.c - Populate driverfs with topology information + * arch/i386/kernel/topology.c - Populate sysfs with topology information * * Written by: Matthew Dobson, IBM Corporation * Original Code: Paul Dorwin, IBM Corporation, Patrick Mochel, OSDL diff --git a/arch/i386/oprofile/nmi_int.c b/arch/i386/oprofile/nmi_int.c index 3700eef..8fda7be 100644 --- a/arch/i386/oprofile/nmi_int.c +++ b/arch/i386/oprofile/nmi_int.c @@ -63,7 +63,7 @@ static struct sys_device device_oprofile = { }; -static int __init init_driverfs(void) +static int __init init_sysfs(void) { int error; if (!(error = sysdev_class_register(&oprofile_sysclass))) @@ -72,15 +72,15 @@ static int __init init_driverfs(void) } -static void exit_driverfs(void) +static void exit_sysfs(void) { sysdev_unregister(&device_oprofile); sysdev_class_unregister(&oprofile_sysclass); } #else -#define init_driverfs() do { } while (0) -#define exit_driverfs() do { } while (0) +#define init_sysfs() do { } while (0) +#define exit_sysfs() do { } while (0) #endif /* CONFIG_PM */ static int profile_exceptions_notify(struct notifier_block *self, @@ -385,7 +385,7 @@ static int __init ppro_init(char ** cpu_type) return 1; } -/* in order to get driverfs right */ +/* in order to get sysfs right */ static int using_nmi; int __init op_nmi_init(struct oprofile_operations *ops) @@ -440,7 +440,7 @@ int __init op_nmi_init(struct oprofile_operations *ops) return -ENODEV; } - init_driverfs(); + init_sysfs(); using_nmi = 1; ops->create_files = nmi_create_files; ops->setup = nmi_setup; @@ -456,5 +456,5 @@ int __init op_nmi_init(struct oprofile_operations *ops) void op_nmi_exit(void) { if (using_nmi) - exit_driverfs(); + exit_sysfs(); } diff --git a/arch/parisc/kernel/topology.c b/arch/parisc/kernel/topology.c index 068b20d..d71cb01 100644 --- a/arch/parisc/kernel/topology.c +++ b/arch/parisc/kernel/topology.c @@ -1,5 +1,5 @@ /* - * arch/parisc/kernel/topology.c - Populate driverfs with topology information + * arch/parisc/kernel/topology.c - Populate sysfs with topology information * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/arch/x86_64/kernel/time.c b/arch/x86_64/kernel/time.c index a87c517..c9addcf 100644 --- a/arch/x86_64/kernel/time.c +++ b/arch/x86_64/kernel/time.c @@ -418,7 +418,7 @@ static struct sysdev_class timer_sysclass = { set_kset_name("timer"), }; -/* XXX this driverfs stuff should probably go elsewhere later -john */ +/* XXX this sysfs stuff should probably go elsewhere later -john */ static struct sys_device device_timer = { .id = 0, .cls = &timer_sysclass, diff --git a/drivers/base/cpu.c b/drivers/base/cpu.c index 7fd095e..fe7ef33 100644 --- a/drivers/base/cpu.c +++ b/drivers/base/cpu.c @@ -103,7 +103,7 @@ static SYSDEV_ATTR(crash_notes, 0400, show_crash_notes, NULL); #endif /* - * register_cpu - Setup a driverfs device for a CPU. + * register_cpu - Setup a sysfs device for a CPU. * @cpu - cpu->hotpluggable field set to 1 will generate a control file in * sysfs for this CPU. * @num - CPU number to use when creating the device. diff --git a/drivers/base/node.c b/drivers/base/node.c index 475e33f..cae346e 100644 --- a/drivers/base/node.c +++ b/drivers/base/node.c @@ -133,7 +133,7 @@ static SYSDEV_ATTR(distance, S_IRUGO, node_read_distance, NULL); /* - * register_node - Setup a driverfs device for a node. + * register_node - Setup a sysfs device for a node. * @num - Node number to use when creating the device. * * Initialize and register the node device. diff --git a/drivers/i2c/busses/i2c-ali1535.c b/drivers/i2c/busses/i2c-ali1535.c index 6fd8ad7..1e277ba 100644 --- a/drivers/i2c/busses/i2c-ali1535.c +++ b/drivers/i2c/busses/i2c-ali1535.c @@ -494,7 +494,7 @@ static int __devinit ali1535_probe(struct pci_dev *dev, const struct pci_device_ return -ENODEV; } - /* set up the driverfs linkage to our parent device */ + /* set up the sysfs linkage to our parent device */ ali1535_adapter.dev.parent = &dev->dev; snprintf(ali1535_adapter.name, I2C_NAME_SIZE, diff --git a/drivers/i2c/busses/i2c-ali15x3.c b/drivers/i2c/busses/i2c-ali15x3.c index e4e0df1..e47fe01 100644 --- a/drivers/i2c/busses/i2c-ali15x3.c +++ b/drivers/i2c/busses/i2c-ali15x3.c @@ -489,7 +489,7 @@ static int __devinit ali15x3_probe(struct pci_dev *dev, const struct pci_device_ return -ENODEV; } - /* set up the driverfs linkage to our parent device */ + /* set up the sysfs linkage to our parent device */ ali15x3_adapter.dev.parent = &dev->dev; snprintf(ali15x3_adapter.name, I2C_NAME_SIZE, diff --git a/drivers/i2c/busses/i2c-amd756.c b/drivers/i2c/busses/i2c-amd756.c index fa6155a..7490dc1 100644 --- a/drivers/i2c/busses/i2c-amd756.c +++ b/drivers/i2c/busses/i2c-amd756.c @@ -374,7 +374,7 @@ static int __devinit amd756_probe(struct pci_dev *pdev, dev_dbg(&pdev->dev, "SMBREV = 0x%X\n", temp); dev_dbg(&pdev->dev, "AMD756_smba = 0x%X\n", amd756_ioport); - /* set up the driverfs linkage to our parent device */ + /* set up the sysfs linkage to our parent device */ amd756_smbus.dev.parent = &pdev->dev; sprintf(amd756_smbus.name, "SMBus %s adapter at %04x", diff --git a/drivers/i2c/busses/i2c-amd8111.c b/drivers/i2c/busses/i2c-amd8111.c index 5bba3fb..e15f9e3 100644 --- a/drivers/i2c/busses/i2c-amd8111.c +++ b/drivers/i2c/busses/i2c-amd8111.c @@ -371,7 +371,7 @@ static int __devinit amd8111_probe(struct pci_dev *dev, smbus->adapter.algo = &smbus_algorithm; smbus->adapter.algo_data = smbus; - /* set up the driverfs linkage to our parent device */ + /* set up the sysfs linkage to our parent device */ smbus->adapter.dev.parent = &dev->dev; pci_write_config_dword(smbus->dev, AMD_PCI_MISC, 0); diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c index 21f2671..6569a36 100644 --- a/drivers/i2c/busses/i2c-i801.c +++ b/drivers/i2c/busses/i2c-i801.c @@ -522,7 +522,7 @@ static int __devinit i801_probe(struct pci_dev *dev, const struct pci_device_id else dev_dbg(&dev->dev, "SMBus using PCI Interrupt\n"); - /* set up the driverfs linkage to our parent device */ + /* set up the sysfs linkage to our parent device */ i801_adapter.dev.parent = &dev->dev; snprintf(i801_adapter.name, I2C_NAME_SIZE, diff --git a/drivers/i2c/busses/i2c-piix4.c b/drivers/i2c/busses/i2c-piix4.c index d888293..21b1809 100644 --- a/drivers/i2c/busses/i2c-piix4.c +++ b/drivers/i2c/busses/i2c-piix4.c @@ -425,7 +425,7 @@ static int __devinit piix4_probe(struct pci_dev *dev, if (retval) return retval; - /* set up the driverfs linkage to our parent device */ + /* set up the sysfs linkage to our parent device */ piix4_adapter.dev.parent = &dev->dev; snprintf(piix4_adapter.name, I2C_NAME_SIZE, diff --git a/drivers/i2c/busses/i2c-sis5595.c b/drivers/i2c/busses/i2c-sis5595.c index d333bab..a6feed4 100644 --- a/drivers/i2c/busses/i2c-sis5595.c +++ b/drivers/i2c/busses/i2c-sis5595.c @@ -384,7 +384,7 @@ static int __devinit sis5595_probe(struct pci_dev *dev, const struct pci_device_ return -ENODEV; } - /* set up the driverfs linkage to our parent device */ + /* set up the sysfs linkage to our parent device */ sis5595_adapter.dev.parent = &dev->dev; sprintf(sis5595_adapter.name, "SMBus SIS5595 adapter at %04x", diff --git a/drivers/i2c/busses/i2c-sis630.c b/drivers/i2c/busses/i2c-sis630.c index 172bacf..5fd734f 100644 --- a/drivers/i2c/busses/i2c-sis630.c +++ b/drivers/i2c/busses/i2c-sis630.c @@ -477,7 +477,7 @@ static int __devinit sis630_probe(struct pci_dev *dev, const struct pci_device_i return -ENODEV; } - /* set up the driverfs linkage to our parent device */ + /* set up the sysfs linkage to our parent device */ sis630_adapter.dev.parent = &dev->dev; sprintf(sis630_adapter.name, "SMBus SIS630 adapter at %04x", diff --git a/drivers/i2c/busses/i2c-sis96x.c b/drivers/i2c/busses/i2c-sis96x.c index 73dae44..4157b0c 100644 --- a/drivers/i2c/busses/i2c-sis96x.c +++ b/drivers/i2c/busses/i2c-sis96x.c @@ -297,7 +297,7 @@ static int __devinit sis96x_probe(struct pci_dev *dev, return -EINVAL; } - /* set up the driverfs linkage to our parent device */ + /* set up the sysfs linkage to our parent device */ sis96x_adapter.dev.parent = &dev->dev; snprintf(sis96x_adapter.name, I2C_NAME_SIZE, diff --git a/drivers/i2c/busses/i2c-via.c b/drivers/i2c/busses/i2c-via.c index bbcc621..8152086 100644 --- a/drivers/i2c/busses/i2c-via.c +++ b/drivers/i2c/busses/i2c-via.c @@ -138,7 +138,7 @@ static int __devinit vt586b_probe(struct pci_dev *dev, const struct pci_device_i outb(inb(I2C_DIR) & ~(I2C_SDA | I2C_SCL), I2C_DIR); outb(inb(I2C_OUT) & ~(I2C_SDA | I2C_SCL), I2C_OUT); - /* set up the driverfs linkage to our parent device */ + /* set up the sysfs linkage to our parent device */ vt586b_adapter.dev.parent = &dev->dev; res = i2c_bit_add_bus(&vt586b_adapter); diff --git a/drivers/scsi/osst.c b/drivers/scsi/osst.c index 9668b73..a967fad 100644 --- a/drivers/scsi/osst.c +++ b/drivers/scsi/osst.c @@ -5574,14 +5574,14 @@ static ssize_t osst_version_show(struct device_driver *ddd, char *buf) static DRIVER_ATTR(version, S_IRUGO, osst_version_show, NULL); -static int osst_create_driverfs_files(struct device_driver *driverfs) +static int osst_create_sysfs_files(struct device_driver *sysfs) { - return driver_create_file(driverfs, &driver_attr_version); + return driver_create_file(sysfs, &driver_attr_version); } -static void osst_remove_driverfs_files(struct device_driver *driverfs) +static void osst_remove_sysfs_files(struct device_driver *sysfs) { - driver_remove_file(driverfs, &driver_attr_version); + driver_remove_file(sysfs, &driver_attr_version); } /* @@ -5953,7 +5953,7 @@ static int __init init_osst(void) if (err) goto err_out_chrdev; - err = osst_create_driverfs_files(&osst_template.gendrv); + err = osst_create_sysfs_files(&osst_template.gendrv); if (err) goto err_out_scsidrv; @@ -5973,7 +5973,7 @@ static void __exit exit_osst (void) int i; struct osst_tape * STp; - osst_remove_driverfs_files(&osst_template.gendrv); + osst_remove_sysfs_files(&osst_template.gendrv); scsi_unregister_driver(&osst_template.gendrv); unregister_chrdev(OSST_MAJOR, "osst"); osst_sysfs_cleanup(); diff --git a/drivers/scsi/scsi_scan.c b/drivers/scsi/scsi_scan.c index a43b9ec..d6fe756 100644 --- a/drivers/scsi/scsi_scan.c +++ b/drivers/scsi/scsi_scan.c @@ -54,7 +54,7 @@ #define SCSI_TIMEOUT (2*HZ) /* - * Prefix values for the SCSI id's (stored in driverfs name field) + * Prefix values for the SCSI id's (stored in sysfs name field) */ #define SCSI_UID_SER_NUM 'S' #define SCSI_UID_UNKNOWN 'Z' diff --git a/drivers/scsi/st.c b/drivers/scsi/st.c index 3d2e023..98d8411 100644 --- a/drivers/scsi/st.c +++ b/drivers/scsi/st.c @@ -195,8 +195,8 @@ static int sgl_unmap_user_pages(struct scatterlist *, const unsigned int, int); static int st_probe(struct device *); static int st_remove(struct device *); -static int do_create_driverfs_files(void); -static void do_remove_driverfs_files(void); +static int do_create_sysfs_files(void); +static void do_remove_sysfs_files(void); static int do_create_class_files(struct scsi_tape *, int, int); static struct scsi_driver st_template = { @@ -4193,7 +4193,7 @@ static int __init init_st(void) if (err) goto err_chrdev; - err = do_create_driverfs_files(); + err = do_create_sysfs_files(); if (err) goto err_scsidrv; @@ -4211,7 +4211,7 @@ err_class: static void __exit exit_st(void) { - do_remove_driverfs_files(); + do_remove_sysfs_files(); scsi_unregister_driver(&st_template.gendrv); unregister_chrdev_region(MKDEV(SCSI_TAPE_MAJOR, 0), ST_MAX_TAPE_ENTRIES); @@ -4249,43 +4249,43 @@ static ssize_t st_version_show(struct device_driver *ddd, char *buf) } static DRIVER_ATTR(version, S_IRUGO, st_version_show, NULL); -static int do_create_driverfs_files(void) +static int do_create_sysfs_files(void) { - struct device_driver *driverfs = &st_template.gendrv; + struct device_driver *sysfs = &st_template.gendrv; int err; - err = driver_create_file(driverfs, &driver_attr_try_direct_io); + err = driver_create_file(sysfs, &driver_attr_try_direct_io); if (err) return err; - err = driver_create_file(driverfs, &driver_attr_fixed_buffer_size); + err = driver_create_file(sysfs, &driver_attr_fixed_buffer_size); if (err) goto err_try_direct_io; - err = driver_create_file(driverfs, &driver_attr_max_sg_segs); + err = driver_create_file(sysfs, &driver_attr_max_sg_segs); if (err) goto err_attr_fixed_buf; - err = driver_create_file(driverfs, &driver_attr_version); + err = driver_create_file(sysfs, &driver_attr_version); if (err) goto err_attr_max_sg; return 0; err_attr_max_sg: - driver_remove_file(driverfs, &driver_attr_max_sg_segs); + driver_remove_file(sysfs, &driver_attr_max_sg_segs); err_attr_fixed_buf: - driver_remove_file(driverfs, &driver_attr_fixed_buffer_size); + driver_remove_file(sysfs, &driver_attr_fixed_buffer_size); err_try_direct_io: - driver_remove_file(driverfs, &driver_attr_try_direct_io); + driver_remove_file(sysfs, &driver_attr_try_direct_io); return err; } -static void do_remove_driverfs_files(void) +static void do_remove_sysfs_files(void) { - struct device_driver *driverfs = &st_template.gendrv; + struct device_driver *sysfs = &st_template.gendrv; - driver_remove_file(driverfs, &driver_attr_version); - driver_remove_file(driverfs, &driver_attr_max_sg_segs); - driver_remove_file(driverfs, &driver_attr_fixed_buffer_size); - driver_remove_file(driverfs, &driver_attr_try_direct_io); + driver_remove_file(sysfs, &driver_attr_version); + driver_remove_file(sysfs, &driver_attr_max_sg_segs); + driver_remove_file(sysfs, &driver_attr_fixed_buffer_size); + driver_remove_file(sysfs, &driver_attr_try_direct_io); } diff --git a/drivers/usb/host/ehci-dbg.c b/drivers/usb/host/ehci-dbg.c index 246afea..43eddae 100644 --- a/drivers/usb/host/ehci-dbg.c +++ b/drivers/usb/host/ehci-dbg.c @@ -322,7 +322,7 @@ static inline void remove_debug_files (struct ehci_hcd *bus) { } #else -/* troubleshooting help: expose state in driverfs */ +/* troubleshooting help: expose state in sysfs */ #define speed_char(info1) ({ char tmp; \ switch (info1 & (3 << 12)) { \ diff --git a/fs/lockd/svc.c b/fs/lockd/svc.c index 50cb8da..126b1bf 100644 --- a/fs/lockd/svc.c +++ b/fs/lockd/svc.c @@ -440,7 +440,7 @@ static ctl_table nlm_sysctl_root[] = { }; /* - * Module (and driverfs) parameters. + * Module (and sysfs) parameters. */ #define param_set_min_max(name, type, which_strtol, min, max) \ diff --git a/include/linux/device.h b/include/linux/device.h index 26e4692..4cc6c93 100644 --- a/include/linux/device.h +++ b/include/linux/device.h @@ -101,7 +101,7 @@ extern int bus_unregister_notifier(struct bus_type *bus, #define BUS_NOTIFY_UNBIND_DRIVER 0x00000004 /* driver about to be unbound */ -/* driverfs interface for exporting bus attributes */ +/* sysfs interface for exporting bus attributes */ struct bus_attribute { struct attribute attr; @@ -146,7 +146,7 @@ extern void put_driver(struct device_driver * drv); extern struct device_driver *driver_find(const char *name, struct bus_type *bus); extern int driver_probe_done(void); -/* driverfs interface for exporting driver attributes */ +/* sysfs interface for exporting driver attributes */ struct driver_attribute { struct attribute attr; diff --git a/include/linux/moduleparam.h b/include/linux/moduleparam.h index 4a189da..bb151bc 100644 --- a/include/linux/moduleparam.h +++ b/include/linux/moduleparam.h @@ -59,7 +59,7 @@ struct kparam_array }; /* This is the fundamental function for registering boot/module - parameters. perm sets the visibility in driverfs: 000 means it's + parameters. perm sets the visibility in sysfs: 000 means it's not there, read bits mean it's readable, write bits mean it's writable. */ #define __module_param_call(prefix, name, set, get, arg, perm) \ -- cgit v0.10.2 From 728f0bbd68e98d6a5d6a17aece000d9a3e24f075 Mon Sep 17 00:00:00 2001 From: "Robert P. J. Day" Date: Sat, 17 Feb 2007 19:16:31 +0100 Subject: Remove useless FIND_FIRST_BIT() macro from cardbus.c. Delete the definition of the unused FIND_FIRST_BIT() macro. Signed-off-by: Robert P. J. Day Signed-off-by: Adrian Bunk diff --git a/drivers/pcmcia/cardbus.c b/drivers/pcmcia/cardbus.c index 2d7effe..a1bd763 100644 --- a/drivers/pcmcia/cardbus.c +++ b/drivers/pcmcia/cardbus.c @@ -40,8 +40,6 @@ /*====================================================================*/ -#define FIND_FIRST_BIT(n) ((n) - ((n) & ((n)-1))) - /* Offsets in the Expansion ROM Image Header */ #define ROM_SIGNATURE 0x0000 /* 2 bytes */ #define ROM_DATA_PTR 0x0018 /* 2 bytes */ -- cgit v0.10.2 From 6fb189c2a4f3bea4936127355903dae2b4104e34 Mon Sep 17 00:00:00 2001 From: "Robert P. J. Day" Date: Sat, 17 Feb 2007 19:17:37 +0100 Subject: Correct trivial typo in log2.h. Single typo correction in include/linux/log2.h. Signed-off-by: Robert P. J. Day Signed-Off-By: David Howells Signed-off-by: Adrian Bunk diff --git a/include/linux/log2.h b/include/linux/log2.h index 99922be..57e641e 100644 --- a/include/linux/log2.h +++ b/include/linux/log2.h @@ -152,7 +152,7 @@ unsigned long __roundup_pow_of_two(unsigned long n) * roundup_pow_of_two - round the given value up to nearest power of two * @n - parameter * - * round the given balue up to the nearest power of two + * round the given value up to the nearest power of two * - the result is undefined when n == 0 * - this can be used to initialise global variables from constant data */ -- cgit v0.10.2 From 4c3ee8266334e927d2318c8d6da5341a01394c0c Mon Sep 17 00:00:00 2001 From: "Robert P. J. Day" Date: Sat, 17 Feb 2007 19:18:52 +0100 Subject: drivers/scsi/a100u2w.c: trivial typo patch Trivial typo fix. Signed-off-by: Robert P. J. Day Signed-off-by: Adrian Bunk diff --git a/drivers/scsi/a100u2w.c b/drivers/scsi/a100u2w.c index 2650a5d..7f4241b 100644 --- a/drivers/scsi/a100u2w.c +++ b/drivers/scsi/a100u2w.c @@ -1067,7 +1067,7 @@ static int __devinit inia100_probe_one(struct pci_dev *pdev, goto out_disable_device; } - /* <02> read from base address + 0x50 offset to get the bios balue. */ + /* <02> read from base address + 0x50 offset to get the bios value. */ bios = ORC_RDWORD(port, 0x50); -- cgit v0.10.2 From bbf2f9fb1c7239ae0aea55f7cb1555f4adc15f76 Mon Sep 17 00:00:00 2001 From: "Robert P. J. Day" Date: Sat, 17 Feb 2007 19:20:16 +0100 Subject: Fix misspellings of "agressive". Fix the various misspellings of "agressive", as well as a couple other things on the same lines while we're there. Signed-off-by: Robert P. J. Day Signed-off-by: Adrian Bunk diff --git a/drivers/scsi/sym53c8xx_2/sym_fw1.h b/drivers/scsi/sym53c8xx_2/sym_fw1.h index 7b39f4a..7b08d6c 100644 --- a/drivers/scsi/sym53c8xx_2/sym_fw1.h +++ b/drivers/scsi/sym53c8xx_2/sym_fw1.h @@ -1020,7 +1020,7 @@ static struct SYM_FWA_SCR SYM_FWA_SCR = { * It shall be a tagged command. * Read SIMPLE+TAG. * The C code will deal with errors. - * Agressive optimization, is'nt it? :) + * Aggressive optimization, isn't it? :) */ SCR_MOVE_ABS (2) ^ SCR_MSG_IN, HADDR_1 (msgin), @@ -1044,7 +1044,7 @@ static struct SYM_FWA_SCR SYM_FWA_SCR = { RADDR_1 (dsa), /* * The SIDL still contains the TAG value. - * Agressive optimization, isn't it? :):) + * Aggressive optimization, isn't it? :):) */ SCR_REG_SFBR (sidl, SCR_SHL, 0), 0, diff --git a/drivers/scsi/sym53c8xx_2/sym_fw2.h b/drivers/scsi/sym53c8xx_2/sym_fw2.h index 851f270..6e5b952 100644 --- a/drivers/scsi/sym53c8xx_2/sym_fw2.h +++ b/drivers/scsi/sym53c8xx_2/sym_fw2.h @@ -956,7 +956,7 @@ static struct SYM_FWA_SCR SYM_FWA_SCR = { * It shall be a tagged command. * Read SIMPLE+TAG. * The C code will deal with errors. - * Agressive optimization, is'nt it? :) + * Aggressive optimization, isn't it? :) */ SCR_MOVE_ABS (2) ^ SCR_MSG_IN, HADDR_1 (msgin), @@ -968,7 +968,7 @@ static struct SYM_FWA_SCR SYM_FWA_SCR = { offsetof(struct sym_lcb, head.itlq_tbl_sa), /* * The SIDL still contains the TAG value. - * Agressive optimization, isn't it? :):) + * Aggressive optimization, isn't it? :):) */ SCR_REG_SFBR (sidl, SCR_SHL, 0), 0, diff --git a/fs/ext4/extents.c b/fs/ext4/extents.c index dc2724f..7916b50 100644 --- a/fs/ext4/extents.c +++ b/fs/ext4/extents.c @@ -222,7 +222,7 @@ static int ext4_ext_space_block(struct inode *inode) size = (inode->i_sb->s_blocksize - sizeof(struct ext4_extent_header)) / sizeof(struct ext4_extent); -#ifdef AGRESSIVE_TEST +#ifdef AGGRESSIVE_TEST if (size > 6) size = 6; #endif @@ -235,7 +235,7 @@ static int ext4_ext_space_block_idx(struct inode *inode) size = (inode->i_sb->s_blocksize - sizeof(struct ext4_extent_header)) / sizeof(struct ext4_extent_idx); -#ifdef AGRESSIVE_TEST +#ifdef AGGRESSIVE_TEST if (size > 5) size = 5; #endif @@ -249,7 +249,7 @@ static int ext4_ext_space_root(struct inode *inode) size = sizeof(EXT4_I(inode)->i_data); size -= sizeof(struct ext4_extent_header); size /= sizeof(struct ext4_extent); -#ifdef AGRESSIVE_TEST +#ifdef AGGRESSIVE_TEST if (size > 3) size = 3; #endif @@ -263,7 +263,7 @@ static int ext4_ext_space_root_idx(struct inode *inode) size = sizeof(EXT4_I(inode)->i_data); size -= sizeof(struct ext4_extent_header); size /= sizeof(struct ext4_extent_idx); -#ifdef AGRESSIVE_TEST +#ifdef AGGRESSIVE_TEST if (size > 4) size = 4; #endif @@ -1118,7 +1118,7 @@ ext4_can_extents_be_merged(struct inode *inode, struct ext4_extent *ex1, */ if (le16_to_cpu(ex1->ee_len) + le16_to_cpu(ex2->ee_len) > EXT_MAX_LEN) return 0; -#ifdef AGRESSIVE_TEST +#ifdef AGGRESSIVE_TEST if (le16_to_cpu(ex1->ee_len) >= 4) return 0; #endif @@ -1891,8 +1891,8 @@ void ext4_ext_init(struct super_block *sb) if (test_opt(sb, EXTENTS)) { printk("EXT4-fs: file extents enabled"); -#ifdef AGRESSIVE_TEST - printk(", agressive tests"); +#ifdef AGGRESSIVE_TEST + printk(", aggressive tests"); #endif #ifdef CHECK_BINSEARCH printk(", check binsearch"); diff --git a/include/linux/ext4_fs_extents.h b/include/linux/ext4_fs_extents.h index a41cc24..7eb1d73 100644 --- a/include/linux/ext4_fs_extents.h +++ b/include/linux/ext4_fs_extents.h @@ -22,12 +22,12 @@ #include /* - * With AGRESSIVE_TEST defined, the capacity of index/leaf blocks + * With AGGRESSIVE_TEST defined, the capacity of index/leaf blocks * becomes very small, so index split, in-depth growing and * other hard changes happen much more often. * This is for debug purposes only. */ -#define AGRESSIVE_TEST_ +#define AGGRESSIVE_TEST_ /* * With EXTENTS_STATS defined, the number of blocks and extents -- cgit v0.10.2 From 85d1fe095ccb6318f7a128c96630477a8859cfce Mon Sep 17 00:00:00 2001 From: "Robert P. J. Day" Date: Sat, 17 Feb 2007 19:21:17 +0100 Subject: Fix comment typo "spin_lock_irqrestore". Fix "spin_lock_irqrestore" to "spin_unlock_irqrestore." Signed-off-by: Robert P. J. Day Signed-off-by: Adrian Bunk diff --git a/arch/ia64/kernel/perfmon.c b/arch/ia64/kernel/perfmon.c index 2ecb20b..9ddf896 100644 --- a/arch/ia64/kernel/perfmon.c +++ b/arch/ia64/kernel/perfmon.c @@ -147,7 +147,7 @@ * in UP: * - we need to protect against PMU overflow interrupts (local_irq_disable) * - * spin_lock_irqsave()/spin_lock_irqrestore(): + * spin_lock_irqsave()/spin_unlock_irqrestore(): * in SMP: local_irq_disable + spin_lock * in UP : local_irq_disable * -- cgit v0.10.2 From 1b3c3714cb4767d00f507cc6854d3339d82c5b9d Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Uwe=20Kleine-K=C3=B6nig?= Date: Sat, 17 Feb 2007 19:23:03 +0100 Subject: Fix typos concerning hierarchy MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit heirarchical, hierachical -> hierarchical heirarchy, hierachy -> hierarchy Signed-off-by: Uwe Kleine-König Signed-off-by: Adrian Bunk diff --git a/Documentation/filesystems/sysfs-pci.txt b/Documentation/filesystems/sysfs-pci.txt index 7ba2baa..5daa2aa 100644 --- a/Documentation/filesystems/sysfs-pci.txt +++ b/Documentation/filesystems/sysfs-pci.txt @@ -65,7 +65,7 @@ Accessing legacy resources through sysfs ---------------------------------------- Legacy I/O port and ISA memory resources are also provided in sysfs if the -underlying platform supports them. They're located in the PCI class heirarchy, +underlying platform supports them. They're located in the PCI class hierarchy, e.g. /sys/class/pci_bus/0000:17/ diff --git a/Documentation/sh/new-machine.txt b/Documentation/sh/new-machine.txt index 73988e0..5482bf5 100644 --- a/Documentation/sh/new-machine.txt +++ b/Documentation/sh/new-machine.txt @@ -17,7 +17,7 @@ of the board-specific code (with the exception of stboards) ended up in arch/sh/kernel/ directly, with board-specific headers ending up in include/asm-sh/. For the new kernel, things are broken out by board type, companion chip type, and CPU type. Looking at a tree view of this directory -heirarchy looks like the following: +hierarchy looks like the following: Board-specific code: @@ -108,7 +108,7 @@ overloading), and you can feel free to name the directory after the family member itself. There are a few things that each board is required to have, both in the -arch/sh/boards and the include/asm-sh/ heirarchy. In order to better +arch/sh/boards and the include/asm-sh/ hierarchy. In order to better explain this, we use some examples for adding an imaginary board. For setup code, we're required at the very least to provide definitions for get_system_type() and platform_setup(). For our imaginary board, this diff --git a/arch/powerpc/mm/numa.c b/arch/powerpc/mm/numa.c index 2627909..e86c37c 100644 --- a/arch/powerpc/mm/numa.c +++ b/arch/powerpc/mm/numa.c @@ -154,7 +154,7 @@ EXPORT_SYMBOL_GPL(of_node_to_nid); * characteristics relative to its multiple connections. We ignore * this for now. We also assume that all cpu and memory sets have * their distances represented at a common level. This won't be - * true for heirarchical NUMA. + * true for hierarchical NUMA. * * In any case the ibm,associativity-reference-points should give * the correct depth for a normal NUMA system. diff --git a/drivers/media/dvb/dvb-core/dvb_frontend.c b/drivers/media/dvb/dvb-core/dvb_frontend.c index e859722..7c42d53 100644 --- a/drivers/media/dvb/dvb-core/dvb_frontend.c +++ b/drivers/media/dvb/dvb-core/dvb_frontend.c @@ -915,7 +915,7 @@ static int dvb_frontend_ioctl(struct inode *inode, struct file *file, fetunesettings.parameters.inversion = INVERSION_AUTO; } if (fe->ops.info.type == FE_OFDM) { - /* without hierachical coding code_rate_LP is irrelevant, + /* without hierarchical coding code_rate_LP is irrelevant, * so we tolerate the otherwise invalid FEC_NONE setting */ if (fepriv->parameters.u.ofdm.hierarchy_information == HIERARCHY_NONE && fepriv->parameters.u.ofdm.code_rate_LP == FEC_NONE) diff --git a/drivers/media/dvb/frontends/dib3000mb.c b/drivers/media/dvb/frontends/dib3000mb.c index adbabfd..b6adea5 100644 --- a/drivers/media/dvb/frontends/dib3000mb.c +++ b/drivers/media/dvb/frontends/dib3000mb.c @@ -239,7 +239,7 @@ static int dib3000mb_set_frontend(struct dvb_frontend* fe, default: return -EINVAL; } - deb_setf("hierachy: "); + deb_setf("hierarchy: "); switch (ofdm->hierarchy_information) { case HIERARCHY_NONE: deb_setf("none "); diff --git a/drivers/pci/pcie/aer/aerdrv.h b/drivers/pci/pcie/aer/aerdrv.h index 3c0a58f..bf655db 100644 --- a/drivers/pci/pcie/aer/aerdrv.h +++ b/drivers/pci/pcie/aer/aerdrv.h @@ -85,7 +85,7 @@ struct aer_rpc { struct mutex rpc_mutex; /* * only one thread could do * recovery on the same - * root port hierachy + * root port hierarchy */ wait_queue_head_t wait_release; }; diff --git a/drivers/scsi/scsi_transport_fc.c b/drivers/scsi/scsi_transport_fc.c index 0d3c10f..58afdb4 100644 --- a/drivers/scsi/scsi_transport_fc.c +++ b/drivers/scsi/scsi_transport_fc.c @@ -855,7 +855,7 @@ static FC_CLASS_DEVICE_ATTR(rport, fast_io_fail_tmo, S_IRUGO | S_IWUSR, /* * Note: in the target show function we recognize when the remote - * port is in the heirarchy and do not allow the driver to get + * port is in the hierarchy and do not allow the driver to get * involved in sysfs functions. The driver only gets involved if * it's the "old" style that doesn't use rports. */ diff --git a/drivers/scsi/scsi_transport_sas.c b/drivers/scsi/scsi_transport_sas.c index 6d39150e..b2ef71a 100644 --- a/drivers/scsi/scsi_transport_sas.c +++ b/drivers/scsi/scsi_transport_sas.c @@ -500,7 +500,7 @@ struct sas_phy *sas_phy_alloc(struct device *parent, int number) EXPORT_SYMBOL(sas_phy_alloc); /** - * sas_phy_add -- add a SAS PHY to the device hierachy + * sas_phy_add -- add a SAS PHY to the device hierarchy * @phy: The PHY to be added * * Publishes a SAS PHY to the rest of the system. @@ -1265,7 +1265,7 @@ struct sas_rphy *sas_expander_alloc(struct sas_port *parent, EXPORT_SYMBOL(sas_expander_alloc); /** - * sas_rphy_add -- add a SAS remote PHY to the device hierachy + * sas_rphy_add -- add a SAS remote PHY to the device hierarchy * @rphy: The remote PHY to be added * * Publishes a SAS remote PHY to the rest of the system. diff --git a/fs/cifs/README b/fs/cifs/README index 432e515..080c5eb 100644 --- a/fs/cifs/README +++ b/fs/cifs/README @@ -1,5 +1,5 @@ The CIFS VFS support for Linux supports many advanced network filesystem -features such as heirarchical dfs like namespace, hardlinks, locking and more. +features such as hierarchical dfs like namespace, hardlinks, locking and more. It was designed to comply with the SNIA CIFS Technical Reference (which supersedes the 1992 X/Open SMB Standard) as well as to perform best practice practical interoperability with Windows 2000, Windows XP, Samba and equivalent diff --git a/fs/ocfs2/namei.c b/fs/ocfs2/namei.c index f7fa52b..28dd757 100644 --- a/fs/ocfs2/namei.c +++ b/fs/ocfs2/namei.c @@ -1098,7 +1098,7 @@ static int ocfs2_rename(struct inode *old_dir, BUG(); } - /* Assume a directory heirarchy thusly: + /* Assume a directory hierarchy thusly: * a/b/c * a/d * a,b,c, and d are all directories. diff --git a/include/asm-ia64/pal.h b/include/asm-ia64/pal.h index bc76815..e43021a 100644 --- a/include/asm-ia64/pal.h +++ b/include/asm-ia64/pal.h @@ -32,7 +32,7 @@ #define PAL_CACHE_FLUSH 1 /* flush i/d cache */ #define PAL_CACHE_INFO 2 /* get detailed i/d cache info */ #define PAL_CACHE_INIT 3 /* initialize i/d cache */ -#define PAL_CACHE_SUMMARY 4 /* get summary of cache heirarchy */ +#define PAL_CACHE_SUMMARY 4 /* get summary of cache hierarchy */ #define PAL_MEM_ATTRIB 5 /* list supported memory attributes */ #define PAL_PTCE_INFO 6 /* purge TLB info */ #define PAL_VM_INFO 7 /* return supported virtual memory features */ @@ -113,14 +113,14 @@ typedef s64 pal_status_t; */ #define PAL_STATUS_REQUIRES_MEMORY (-9) /* Call requires PAL memory buffer */ -/* Processor cache level in the heirarchy */ +/* Processor cache level in the hierarchy */ typedef u64 pal_cache_level_t; #define PAL_CACHE_LEVEL_L0 0 /* L0 */ #define PAL_CACHE_LEVEL_L1 1 /* L1 */ #define PAL_CACHE_LEVEL_L2 2 /* L2 */ -/* Processor cache type at a particular level in the heirarchy */ +/* Processor cache type at a particular level in the hierarchy */ typedef u64 pal_cache_type_t; #define PAL_CACHE_TYPE_INSTRUCTION 1 /* Instruction cache */ @@ -272,14 +272,14 @@ typedef struct pal_cache_protection_info_s { #define PAL_CACHE_PROT_METHOD_ECC 3 /* ECC protection */ -/* Processor cache line identification in the heirarchy */ +/* Processor cache line identification in the hierarchy */ typedef union pal_cache_line_id_u { u64 pclid_data; struct { u64 cache_type : 8, /* 7-0 cache type */ level : 8, /* 15-8 level of the * cache in the - * heirarchy. + * hierarchy. */ way : 8, /* 23-16 way in the set */ @@ -292,7 +292,7 @@ typedef union pal_cache_line_id_u { u64 cache_type : 8, /* 7-0 cache type */ level : 8, /* 15-8 level of the * cache in the - * heirarchy. + * hierarchy. */ way : 8, /* 23-16 way in the set */ @@ -978,7 +978,7 @@ ia64_pal_cache_read (pal_cache_line_id_u_t line_id, u64 physical_addr) return iprv.status; } -/* Return summary information about the heirarchy of caches controlled by the processor */ +/* Return summary information about the hierarchy of caches controlled by the processor */ static inline s64 ia64_pal_cache_summary (u64 *cache_levels, u64 *unique_caches) { -- cgit v0.10.2 From be7d2f775c788a1891f0f600537f130178448b20 Mon Sep 17 00:00:00 2001 From: Erik Hovland Date: Sat, 17 Feb 2007 19:29:21 +0100 Subject: trivial documentation patch for platform.txt Found a couple of typos in the Documentation/driver-model/platform.txt file. This patch fixes both of them. Signed-off-by: Erik Hovland Signed-off-by: Adrian Bunk diff --git a/Documentation/driver-model/platform.txt b/Documentation/driver-model/platform.txt index 9f0bc3b..f7c9262 100644 --- a/Documentation/driver-model/platform.txt +++ b/Documentation/driver-model/platform.txt @@ -66,7 +66,7 @@ runtime memory footprint: Device Enumeration ~~~~~~~~~~~~~~~~~~ -As a rule, platform specific (and often board-specific) setup code wil +As a rule, platform specific (and often board-specific) setup code will register platform devices: int platform_device_register(struct platform_device *pdev); @@ -106,7 +106,7 @@ It's built from two components: * platform_device.id ... the device instance number, or else "-1" to indicate there's only one. -These are catenated, so name/id "serial"/0 indicates bus_id "serial.0", and +These are concatenated, so name/id "serial"/0 indicates bus_id "serial.0", and "serial/3" indicates bus_id "serial.3"; both would use the platform_driver named "serial". While "my_rtc"/-1 would be bus_id "my_rtc" (no instance id) and use the platform_driver called "my_rtc". -- cgit v0.10.2 From 082f6f9ddcce40e880c1ec03bfb6a06a421188b4 Mon Sep 17 00:00:00 2001 From: Matthew Wilcox Date: Sat, 17 Feb 2007 19:36:33 +0100 Subject: fix SCSI_SCAN_ASYNC help text Signed-off-by: Adrian Bunk diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig index 5bf3f07..4cd280e 100644 --- a/drivers/scsi/Kconfig +++ b/drivers/scsi/Kconfig @@ -230,6 +230,7 @@ config SCSI_SCAN_ASYNC The SCSI subsystem can probe for devices while the rest of the system continues booting, and even probe devices on different busses in parallel, leading to a significant speed-up. + If you have built SCSI as modules, enabling this option can be a problem as the devices may not have been found by the time your system expects them to have been. You can load the @@ -237,8 +238,8 @@ config SCSI_SCAN_ASYNC If you build your SCSI drivers into the kernel, then everything will work fine if you say Y here. - You can override this choice by specifying scsi_mod.scan="sync" - or "async" on the kernel's command line. + You can override this choice by specifying "scsi_mod.scan=sync" + or async on the kernel's command line. menu "SCSI Transports" depends on SCSI -- cgit v0.10.2 From 6486abbf63a58af490144ecbc38375f655d328ad Mon Sep 17 00:00:00 2001 From: Simon Depiets <2df@tuxfamily.org> Date: Sat, 17 Feb 2007 19:42:17 +0100 Subject: fix the BAYCOM_SER_HDX help text This fixes kernel Bugzilla #4076. Signed-off-by: Adrian Bunk diff --git a/drivers/net/hamradio/Kconfig b/drivers/net/hamradio/Kconfig index feb0ada..6e90619 100644 --- a/drivers/net/hamradio/Kconfig +++ b/drivers/net/hamradio/Kconfig @@ -138,7 +138,7 @@ config BAYCOM_SER_HDX ---help--- This is one of two drivers for Baycom style simple amateur radio modems that connect to a serial interface. The driver supports the - ser12 design in full-duplex mode. This is the old driver. It is + ser12 design in half-duplex mode. This is the old driver. It is still provided in case your serial interface chip does not work with the full-duplex driver. This driver is depreciated. To configure the driver, use the sethdlc utility available in the standard ax25 @@ -190,3 +190,4 @@ config YAM To compile this driver as a module, choose M here: the module will be called yam. + -- cgit v0.10.2 From 936bb14ce9ecb3b17251f3589b59dd23419d2cb7 Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Sat, 17 Feb 2007 19:49:13 +0100 Subject: correct a dead URL in the IP_MULTICAST help text Reported in kernel Bugzilla #6216. Signed-off-by: Adrian Bunk diff --git a/net/ipv4/Kconfig b/net/ipv4/Kconfig index 503e705..91f3a5c 100644 --- a/net/ipv4/Kconfig +++ b/net/ipv4/Kconfig @@ -9,7 +9,7 @@ config IP_MULTICAST intend to participate in the MBONE, a high bandwidth network on top of the Internet which carries audio and video broadcasts. More information about the MBONE is on the WWW at - . Information about the multicast + . Information about the multicast capabilities of the various network cards is contained in . For most people, it's safe to say N. -- cgit v0.10.2 From edd023d0b86b599a8e89c1c014911129210fb955 Mon Sep 17 00:00:00 2001 From: John Daiker Date: Sat, 17 Feb 2007 19:52:10 +0100 Subject: add a help text for BLK_DEV_GENERIC This fixes kernel Bugzilla #4933. Signed-off-by: Adrian Bunk diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig index ec03341..6adf864 100644 --- a/drivers/ide/Kconfig +++ b/drivers/ide/Kconfig @@ -383,6 +383,9 @@ config BLK_DEV_OFFBOARD config BLK_DEV_GENERIC tristate "Generic PCI IDE Chipset Support" depends on BLK_DEV_IDEPCI + help + This option provides generic support for various PCI IDE Chipsets + which otherwise might not be supported. config BLK_DEV_OPTI621 tristate "OPTi 82C621 chipset enhanced support (EXPERIMENTAL)" -- cgit v0.10.2 From 4b2d5c049079d342e3e268c162dcecbd7bad1411 Mon Sep 17 00:00:00 2001 From: Shane Shrybman Date: Sat, 17 Feb 2007 19:56:23 +0100 Subject: drivers/net/eexpress.c: remove duplicate comment Signed-off-by: Adrian Bunk diff --git a/drivers/net/eexpress.c b/drivers/net/eexpress.c index 4a50fcb..3868b80 100644 --- a/drivers/net/eexpress.c +++ b/drivers/net/eexpress.c @@ -714,13 +714,6 @@ static int eexp_xmit(struct sk_buff *buf, struct net_device *dev) * check to make sure we've not become wedged. */ -/* - * Handle an EtherExpress interrupt - * If we've finished initializing, start the RU and CU up. - * If we've already started, reap tx buffers, handle any received packets, - * check to make sure we've not become wedged. - */ - static unsigned short eexp_start_irq(struct net_device *dev, unsigned short status) { -- cgit v0.10.2 From 78f92a82c20a9f66d215f6c6d96fb91c0763ce95 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Sat, 17 Feb 2007 19:58:30 +0100 Subject: doc: make doc. for maxcpus= more visible Some people are confused about maxcpus=1 and maxcpus=0, so put the documentation text from init/main.c into Documentation/kernel-parameters.txt also. Signed-off-by: Randy Dunlap Signed-off-by: Adrian Bunk diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index abd575c..f6a3961 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -863,7 +863,14 @@ and is between 256 and 4096 characters. It is defined in the file Format: <1-256> maxcpus= [SMP] Maximum number of processors that an SMP kernel - should make use of + should make use of. + Using "nosmp" or "maxcpus=0" will disable SMP + entirely (the MPS table probe still happens, though). + A command-line option of "maxcpus=", where + is an integer greater than 0, limits the maximum number + of CPUs activated in SMP mode to . + Using "maxcpus=1" on an SMP kernel is the trivial + case of an SMP kernel with only one CPU. max_addr=[KMG] [KNL,BOOT,ia64] All physical memory greater than or equal to this physical address is ignored. -- cgit v0.10.2 From 5c811e59ada9d31f79c8d340f28184084a3aea5b Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Sat, 17 Feb 2007 20:03:14 +0100 Subject: kbuild: more doc. cleanups Fix typos/spellos in kbuild/makefiles.txt. Signed-off-by: Randy Dunlap Signed-off-by: Adrian Bunk diff --git a/Documentation/kbuild/makefiles.txt b/Documentation/kbuild/makefiles.txt index 4b3d671..bb5306e 100644 --- a/Documentation/kbuild/makefiles.txt +++ b/Documentation/kbuild/makefiles.txt @@ -34,7 +34,7 @@ This document describes the Linux kernel Makefiles. --- 6.1 Set variables to tweak the build to the architecture --- 6.2 Add prerequisites to archprepare: --- 6.3 List directories to visit when descending - --- 6.4 Architecture specific boot images + --- 6.4 Architecture-specific boot images --- 6.5 Building non-kbuild targets --- 6.6 Commands useful for building a boot image --- 6.7 Custom kbuild commands @@ -124,7 +124,7 @@ more details, with real examples. Example: obj-y += foo.o - This tell kbuild that there is one object in that directory, named + This tells kbuild that there is one object in that directory, named foo.o. foo.o will be built from foo.c or foo.S. If foo.o shall be built as a module, the variable obj-m is used. @@ -353,7 +353,7 @@ more details, with real examples. Special rules are used when the kbuild infrastructure does not provide the required support. A typical example is header files generated during the build process. - Another example are the architecture specific Makefiles which + Another example are the architecture-specific Makefiles which need special rules to prepare boot images etc. Special rules are written as normal Make rules. @@ -416,7 +416,7 @@ more details, with real examples. #arch/i386/kernel/Makefile vsyscall-flags += $(call ld-option, -Wl$(comma)--hash-style=sysv) - In the above example vsyscall-flags will be assigned the option + In the above example, vsyscall-flags will be assigned the option -Wl$(comma)--hash-style=sysv if it is supported by $(CC). The second argument is optional, and if supplied will be used if first argument is not supported. @@ -434,7 +434,7 @@ more details, with real examples. #arch/i386/Makefile cflags-y += $(call cc-option,-march=pentium-mmx,-march=i586) - In the above example cflags-y will be assigned the option + In the above example, cflags-y will be assigned the option -march=pentium-mmx if supported by $(CC), otherwise -march=i586. The second argument to cc-option is optional, and if omitted, cflags-y will be assigned no value if first option is not supported. @@ -750,10 +750,10 @@ When kbuild executes, the following steps are followed (roughly): located at the root of the obj tree. The very first objects linked are listed in head-y, assigned by arch/$(ARCH)/Makefile. -7) Finally, the architecture specific part does any required post processing +7) Finally, the architecture-specific part does any required post processing and builds the final bootimage. - This includes building boot records - - Preparing initrd images and thelike + - Preparing initrd images and the like --- 6.1 Set variables to tweak the build to the architecture @@ -880,7 +880,7 @@ When kbuild executes, the following steps are followed (roughly): $(head-y) lists objects to be linked first in vmlinux. $(libs-y) lists directories where a lib.a archive can be located. - The rest lists directories where a built-in.o object file can be + The rest list directories where a built-in.o object file can be located. $(init-y) objects will be located after $(head-y). @@ -888,7 +888,7 @@ When kbuild executes, the following steps are followed (roughly): $(core-y), $(libs-y), $(drivers-y) and $(net-y). The top level Makefile defines values for all generic directories, - and arch/$(ARCH)/Makefile only adds architecture specific directories. + and arch/$(ARCH)/Makefile only adds architecture-specific directories. Example: #arch/sparc64/Makefile @@ -897,7 +897,7 @@ When kbuild executes, the following steps are followed (roughly): drivers-$(CONFIG_OPROFILE) += arch/sparc64/oprofile/ ---- 6.4 Architecture specific boot images +--- 6.4 Architecture-specific boot images An arch Makefile specifies goals that take the vmlinux file, compress it, wrap it in bootstrapping code, and copy the resulting files @@ -924,7 +924,7 @@ When kbuild executes, the following steps are followed (roughly): "$(Q)$(MAKE) $(build)=" is the recommended way to invoke make in a subdirectory. - There are no rules for naming architecture specific targets, + There are no rules for naming architecture-specific targets, but executing "make help" will list all relevant targets. To support this, $(archhelp) must be defined. @@ -982,7 +982,7 @@ When kbuild executes, the following steps are followed (roughly): $(call if_changed,ld/objcopy/gzip) When the rule is evaluated, it is checked to see if any files - needs an update, or the command line has changed since the last + need an update, or the command line has changed since the last invocation. The latter will force a rebuild if any options to the executable have changed. Any target that utilises if_changed must be listed in $(targets), @@ -1089,7 +1089,7 @@ When kbuild executes, the following steps are followed (roughly): assignment. The kbuild infrastructure for *lds file are used in several - architecture specific files. + architecture-specific files. === 7 Kbuild Variables @@ -1133,7 +1133,7 @@ The top Makefile exports the following variables: This variable defines a place for the arch Makefiles to install the resident kernel image and System.map file. - Use this for architecture specific install targets. + Use this for architecture-specific install targets. INSTALL_MOD_PATH, MODLIB -- cgit v0.10.2 From 3171470565cb422f295b18a92d0a9137a3ad5266 Mon Sep 17 00:00:00 2001 From: Jesper Juhl Date: Sat, 17 Feb 2007 20:07:02 +0100 Subject: Remove duplicate listing of Cris arch from README Mikael Pettersson pointed out to me that a recent patch of mine (commit 620034c84d1d939717bdfbe02c51a3fee43541c3), that made some corrections to the README file, accidentally listed the Cris architecture twice. Whoops. This patch removes the duplicate. Signed-off-by: Jesper Juhl Signed-off-by: Adrian Bunk diff --git a/README b/README index 46a66c6..159912c 100644 --- a/README +++ b/README @@ -24,7 +24,7 @@ ON WHAT HARDWARE DOES IT RUN? today Linux also runs on (at least) the Compaq Alpha AXP, Sun SPARC and UltraSPARC, Motorola 68000, PowerPC, PowerPC64, ARM, Hitachi SuperH, Cell, IBM S/390, MIPS, HP PA-RISC, Intel IA-64, DEC VAX, AMD x86-64, AXIS CRIS, - Cris, Xtensa, AVR32 and Renesas M32R architectures. + Xtensa, AVR32 and Renesas M32R architectures. Linux is easily portable to most general-purpose 32- or 64-bit architectures as long as they have a paged memory management unit (PMMU) and a port of the -- cgit v0.10.2 From a8e14b950c9a9e2ec703df610e00ae8581040517 Mon Sep 17 00:00:00 2001 From: Jesper Juhl Date: Sat, 17 Feb 2007 20:08:22 +0100 Subject: update I/O sched Kconfig help texts - CFQ is now default, not AS. Change I/O scheduler description to correctly show CFQ as being the default scheduler and not the anticipatory scheduler that previously was default. Signed-off-by: Jesper Juhl Signed-off-by: Adrian Bunk diff --git a/block/Kconfig.iosched b/block/Kconfig.iosched index 903f0d3..7e803fc 100644 --- a/block/Kconfig.iosched +++ b/block/Kconfig.iosched @@ -16,10 +16,10 @@ config IOSCHED_AS tristate "Anticipatory I/O scheduler" default y ---help--- - The anticipatory I/O scheduler is the default disk scheduler. It is - generally a good choice for most environments, but is quite large and - complex when compared to the deadline I/O scheduler, it can also be - slower in some cases especially some database loads. + The anticipatory I/O scheduler is generally a good choice for most + environments, but is quite large and complex when compared to the + deadline I/O scheduler, it can also be slower in some cases + especially some database loads. config IOSCHED_DEADLINE tristate "Deadline I/O scheduler" @@ -38,6 +38,7 @@ config IOSCHED_CFQ The CFQ I/O scheduler tries to distribute bandwidth equally among all processes in the system. It should provide a fair working environment, suitable for desktop systems. + This is the default I/O scheduler. choice prompt "Default I/O scheduler" -- cgit v0.10.2 From 0bbfb7c2e4b682542a822d3af05cea0e5cb5ba81 Mon Sep 17 00:00:00 2001 From: Patrick Pletscher Date: Sat, 17 Feb 2007 20:10:16 +0100 Subject: kernel/printk.c: comment fix Signed-off-by: Patrick Pletscher Signed-off-by: Adrian Bunk diff --git a/kernel/printk.c b/kernel/printk.c index 0c15187..4b47e59 100644 --- a/kernel/printk.c +++ b/kernel/printk.c @@ -54,7 +54,7 @@ int console_printk[4] = { }; /* - * Low lever drivers may need that to know if they can schedule in + * Low level drivers may need that to know if they can schedule in * their unblank() callback or not. So let's export it. */ int oops_in_progress; -- cgit v0.10.2 From c5a69d57eb48e36f84c0737b5b24ec277d7dbfba Mon Sep 17 00:00:00 2001 From: Tobias Klauser Date: Sat, 17 Feb 2007 20:11:19 +0100 Subject: Storage class should be before const qualifier The C99 specification states in section 6.11.5: The placement of a storage-class specifier other than at the beginning of the declaration specifiers in a declaration is an obsolescent feature. Signed-off-by: Tobias Klauser Signed-off-by: Adrian Bunk diff --git a/arch/mips/kernel/machine_kexec.c b/arch/mips/kernel/machine_kexec.c index e0ad754..8f42fa8 100644 --- a/arch/mips/kernel/machine_kexec.c +++ b/arch/mips/kernel/machine_kexec.c @@ -13,8 +13,8 @@ #include #include -const extern unsigned char relocate_new_kernel[]; -const extern unsigned int relocate_new_kernel_size; +extern const unsigned char relocate_new_kernel[]; +extern const unsigned int relocate_new_kernel_size; extern unsigned long kexec_start_address; extern unsigned long kexec_indirection_page; diff --git a/arch/powerpc/kernel/rtas.c b/arch/powerpc/kernel/rtas.c index 76b5d7e..9d0735a 100644 --- a/arch/powerpc/kernel/rtas.c +++ b/arch/powerpc/kernel/rtas.c @@ -182,7 +182,7 @@ void rtas_progress(char *s, unsigned short hex) char *os; static int display_character, set_indicator; static int display_width, display_lines, form_feed; - const static int *row_width; + static const int *row_width; static DEFINE_SPINLOCK(progress_lock); static int current_line; static int pending_newline = 0; /* did last write end with unprinted newline? */ diff --git a/arch/sh/kernel/cpu/sh2/clock-sh7619.c b/arch/sh/kernel/cpu/sh2/clock-sh7619.c index d0440b2..d2c1579 100644 --- a/arch/sh/kernel/cpu/sh2/clock-sh7619.c +++ b/arch/sh/kernel/cpu/sh2/clock-sh7619.c @@ -18,8 +18,8 @@ #include #include -const static int pll1rate[]={1,2}; -const static int pfc_divisors[]={1,2,0,4}; +static const int pll1rate[] = {1,2}; +static const int pfc_divisors[] = {1,2,0,4}; #if (CONFIG_SH_CLK_MD == 1) || (CONFIG_SH_CLK_MD == 2) #define PLL2 (4) diff --git a/arch/sh/kernel/cpu/sh2a/clock-sh7206.c b/arch/sh/kernel/cpu/sh2a/clock-sh7206.c index a9ad309..82d7f99 100644 --- a/arch/sh/kernel/cpu/sh2a/clock-sh7206.c +++ b/arch/sh/kernel/cpu/sh2a/clock-sh7206.c @@ -18,8 +18,8 @@ #include #include -const static int pll1rate[]={1,2,3,4,6,8}; -const static int pfc_divisors[]={1,2,3,4,6,8,12}; +static const int pll1rate[]={1,2,3,4,6,8}; +static const int pfc_divisors[]={1,2,3,4,6,8,12}; #define ifc_divisors pfc_divisors #if (CONFIG_SH_CLK_MD == 2) diff --git a/drivers/ieee1394/ohci1394.c b/drivers/ieee1394/ohci1394.c index e982d60..06fac0d 100644 --- a/drivers/ieee1394/ohci1394.c +++ b/drivers/ieee1394/ohci1394.c @@ -180,7 +180,7 @@ static int alloc_dma_trm_ctx(struct ti_ohci *ohci, struct dma_trm_ctx *d, static void ohci1394_pci_remove(struct pci_dev *pdev); #ifndef __LITTLE_ENDIAN -const static size_t hdr_sizes[] = { +static const size_t hdr_sizes[] = { 3, /* TCODE_WRITEQ */ 4, /* TCODE_WRITEB */ 3, /* TCODE_WRITE_RESPONSE */ diff --git a/drivers/input/serio/libps2.c b/drivers/input/serio/libps2.c index b3e84d3..10d9d74 100644 --- a/drivers/input/serio/libps2.c +++ b/drivers/input/serio/libps2.c @@ -97,7 +97,7 @@ EXPORT_SYMBOL(ps2_drain); int ps2_is_keyboard_id(char id_byte) { - const static char keyboard_ids[] = { + static const char keyboard_ids[] = { 0xab, /* Regular keyboards */ 0xac, /* NCD Sun keyboard */ 0x2b, /* Trust keyboard, translated */ diff --git a/drivers/media/video/pvrusb2/pvrusb2-audio.c b/drivers/media/video/pvrusb2/pvrusb2-audio.c index 9846c46..122496f 100644 --- a/drivers/media/video/pvrusb2/pvrusb2-audio.c +++ b/drivers/media/video/pvrusb2/pvrusb2-audio.c @@ -158,7 +158,7 @@ static unsigned int pvr2_msp3400_describe(struct pvr2_msp3400_handler *ctxt, } -const static struct pvr2_i2c_handler_functions msp3400_funcs = { +static const struct pvr2_i2c_handler_functions msp3400_funcs = { .detach = (void (*)(void *))pvr2_msp3400_detach, .check = (int (*)(void *))msp3400_check, .update = (void (*)(void *))msp3400_update, diff --git a/drivers/media/video/pvrusb2/pvrusb2-cx2584x-v4l.c b/drivers/media/video/pvrusb2/pvrusb2-cx2584x-v4l.c index 848fb233..8df969c 100644 --- a/drivers/media/video/pvrusb2/pvrusb2-cx2584x-v4l.c +++ b/drivers/media/video/pvrusb2/pvrusb2-cx2584x-v4l.c @@ -226,7 +226,7 @@ static void decoder_reset(struct pvr2_v4l_cx2584x *ctxt) } -const static struct pvr2_i2c_handler_functions hfuncs = { +static const struct pvr2_i2c_handler_functions hfuncs = { .detach = (void (*)(void *))decoder_detach, .check = (int (*)(void *))decoder_check, .update = (void (*)(void *))decoder_update, diff --git a/drivers/media/video/pvrusb2/pvrusb2-std.c b/drivers/media/video/pvrusb2/pvrusb2-std.c index f95c598..c089255 100644 --- a/drivers/media/video/pvrusb2/pvrusb2-std.c +++ b/drivers/media/video/pvrusb2/pvrusb2-std.c @@ -78,14 +78,14 @@ struct std_name { #define CSTD_ALL (CSTD_PAL|CSTD_NTSC|CSTD_SECAM) /* Mapping of standard bits to color system */ -const static struct std_name std_groups[] = { +static const struct std_name std_groups[] = { {"PAL",CSTD_PAL}, {"NTSC",CSTD_NTSC}, {"SECAM",CSTD_SECAM}, }; /* Mapping of standard bits to modulation system */ -const static struct std_name std_items[] = { +static const struct std_name std_items[] = { {"B",TSTD_B}, {"B1",TSTD_B1}, {"D",TSTD_D}, diff --git a/drivers/media/video/pvrusb2/pvrusb2-tuner.c b/drivers/media/video/pvrusb2/pvrusb2-tuner.c index af9f246..bb17db3 100644 --- a/drivers/media/video/pvrusb2/pvrusb2-tuner.c +++ b/drivers/media/video/pvrusb2/pvrusb2-tuner.c @@ -80,7 +80,7 @@ static unsigned int pvr2_tuner_describe(struct pvr2_tuner_handler *ctxt,char *bu } -const static struct pvr2_i2c_handler_functions tuner_funcs = { +static const struct pvr2_i2c_handler_functions tuner_funcs = { .detach = (void (*)(void *))pvr2_tuner_detach, .check = (int (*)(void *))tuner_check, .update = (void (*)(void *))tuner_update, diff --git a/drivers/media/video/pvrusb2/pvrusb2-video-v4l.c b/drivers/media/video/pvrusb2/pvrusb2-video-v4l.c index 05f2cdd..2a82646 100644 --- a/drivers/media/video/pvrusb2/pvrusb2-video-v4l.c +++ b/drivers/media/video/pvrusb2/pvrusb2-video-v4l.c @@ -201,7 +201,7 @@ static unsigned int decoder_describe(struct pvr2_v4l_decoder *ctxt,char *buf,uns } -const static struct pvr2_i2c_handler_functions hfuncs = { +static const struct pvr2_i2c_handler_functions hfuncs = { .detach = (void (*)(void *))decoder_detach, .check = (int (*)(void *))decoder_check, .update = (void (*)(void *))decoder_update, diff --git a/drivers/media/video/pvrusb2/pvrusb2-wm8775.c b/drivers/media/video/pvrusb2/pvrusb2-wm8775.c index 2413e51..7794c34 100644 --- a/drivers/media/video/pvrusb2/pvrusb2-wm8775.c +++ b/drivers/media/video/pvrusb2/pvrusb2-wm8775.c @@ -126,7 +126,7 @@ static void wm8775_update(struct pvr2_v4l_wm8775 *ctxt) } -const static struct pvr2_i2c_handler_functions hfuncs = { +static const struct pvr2_i2c_handler_functions hfuncs = { .detach = (void (*)(void *))wm8775_detach, .check = (int (*)(void *))wm8775_check, .update = (void (*)(void *))wm8775_update, diff --git a/drivers/scsi/arm/eesox.c b/drivers/scsi/arm/eesox.c index 4677152..d413652 100644 --- a/drivers/scsi/arm/eesox.c +++ b/drivers/scsi/arm/eesox.c @@ -196,7 +196,7 @@ static void eesoxscsi_buffer_in(void *buf, int length, void __iomem *base) const void __iomem *reg_fas = base + EESOX_FAS216_OFFSET; const void __iomem *reg_dmastat = base + EESOX_DMASTAT; const void __iomem *reg_dmadata = base + EESOX_DMADATA; - const register unsigned long mask = 0xffff; + register const unsigned long mask = 0xffff; do { unsigned int status; diff --git a/fs/cifs/cifssmb.c b/fs/cifs/cifssmb.c index b8e9147..2436410 100644 --- a/fs/cifs/cifssmb.c +++ b/fs/cifs/cifssmb.c @@ -2824,10 +2824,10 @@ GetExtAttrOut: /* security id for everyone */ -const static struct cifs_sid sid_everyone = +static const struct cifs_sid sid_everyone = {1, 1, {0, 0, 0, 0, 0, 0}, {0, 0, 0, 0}}; /* group users */ -const static struct cifs_sid sid_user = +static const struct cifs_sid sid_user = {1, 2 , {0, 0, 0, 0, 0, 5}, {32, 545, 0, 0}}; /* Convert CIFS ACL to POSIX form */ diff --git a/include/asm-arm/uaccess.h b/include/asm-arm/uaccess.h index c92df95..4c1a3fa 100644 --- a/include/asm-arm/uaccess.h +++ b/include/asm-arm/uaccess.h @@ -109,7 +109,7 @@ extern int __get_user_4(void *); #define get_user(x,p) \ ({ \ - const register typeof(*(p)) __user *__p asm("r0") = (p);\ + register const typeof(*(p)) __user *__p asm("r0") = (p);\ register unsigned long __r2 asm("r2"); \ register int __e asm("r0"); \ switch (sizeof(*(__p))) { \ @@ -143,8 +143,8 @@ extern int __put_user_8(void *, unsigned long long); #define put_user(x,p) \ ({ \ - const register typeof(*(p)) __r2 asm("r2") = (x); \ - const register typeof(*(p)) __user *__p asm("r0") = (p);\ + register const typeof(*(p)) __r2 asm("r2") = (x); \ + register const typeof(*(p)) __user *__p asm("r0") = (p);\ register int __e asm("r0"); \ switch (sizeof(*(__p))) { \ case 1: \ diff --git a/include/asm-arm26/uaccess.h b/include/asm-arm26/uaccess.h index 3f2dd10..d64ed84 100644 --- a/include/asm-arm26/uaccess.h +++ b/include/asm-arm26/uaccess.h @@ -74,7 +74,7 @@ extern int __get_user_bad(void); #define get_user(x,p) \ ({ \ - const register typeof(*(p)) *__p asm("r0") = (p); \ + register const typeof(*(p)) *__p asm("r0") = (p); \ register typeof(*(p)) __r1 asm("r1"); \ register int __e asm("r0"); \ switch (sizeof(*(p))) { \ @@ -139,8 +139,8 @@ extern int __put_user_bad(void); #define put_user(x,p) \ ({ \ - const register typeof(*(p)) __r1 asm("r1") = (x); \ - const register typeof(*(p)) *__p asm("r0") = (p); \ + register const typeof(*(p)) __r1 asm("r1") = (x); \ + register const typeof(*(p)) *__p asm("r0") = (p); \ register int __e asm("r0"); \ switch (sizeof(*(__p))) { \ case 1: \ @@ -170,8 +170,8 @@ extern int __put_user_bad(void); #define put_user(x,p) \ ({ \ - const register typeof(*(p)) __r1 asm("r1") = (x); \ - const register typeof(*(p)) *__p asm("r0") = (p); \ + register const typeof(*(p)) __r1 asm("r1") = (x); \ + register const typeof(*(p)) *__p asm("r0") = (p); \ register int __e asm("r0"); \ switch (sizeof(*(p))) { \ case 1: \ diff --git a/include/asm-ia64/kexec.h b/include/asm-ia64/kexec.h index 01c36b0..f2ad469 100644 --- a/include/asm-ia64/kexec.h +++ b/include/asm-ia64/kexec.h @@ -23,7 +23,7 @@ extern struct kimage *ia64_kimage; DECLARE_PER_CPU(u64, ia64_mca_pal_base); -const extern unsigned int relocate_new_kernel_size; +extern const unsigned int relocate_new_kernel_size; extern void relocate_new_kernel(unsigned long, unsigned long, struct ia64_boot_param *, unsigned long); static inline void -- cgit v0.10.2 From e34f80cd865a89341331568e715e3d3e35d0d929 Mon Sep 17 00:00:00 2001 From: Nicolas Kaiser Date: Sat, 17 Feb 2007 20:12:12 +0100 Subject: arch/cris: typo in KERN_INFO Typo in KERN_INFO. Signed-off-by: Nicolas Kaiser Signed-off-by: Adrian Bunk diff --git a/arch/cris/arch-v10/drivers/pcf8563.c b/arch/cris/arch-v10/drivers/pcf8563.c index 107796e..d47cfbf 100644 --- a/arch/cris/arch-v10/drivers/pcf8563.c +++ b/arch/cris/arch-v10/drivers/pcf8563.c @@ -311,7 +311,7 @@ pcf8563_register(void) { pcf8563_init(); if (register_chrdev(PCF8563_MAJOR, DEVICE_NAME, &pcf8563_fops) < 0) { - printk(KERN_INFO "%s: Unable to get major numer %d for RTC device.\n", + printk(KERN_INFO "%s: Unable to get major number %d for RTC device.\n", PCF8563_NAME, PCF8563_MAJOR); return -1; } diff --git a/arch/cris/arch-v32/drivers/pcf8563.c b/arch/cris/arch-v32/drivers/pcf8563.c index 544ab01..24b919b 100644 --- a/arch/cris/arch-v32/drivers/pcf8563.c +++ b/arch/cris/arch-v32/drivers/pcf8563.c @@ -171,7 +171,7 @@ pcf8563_init(void) goto err; if (register_chrdev(PCF8563_MAJOR, DEVICE_NAME, &pcf8563_fops) < 0) { - printk(KERN_INFO "%s: Unable to get major numer %d for RTC device.\n", + printk(KERN_INFO "%s: Unable to get major number %d for RTC device.\n", PCF8563_NAME, PCF8563_MAJOR); return -1; } -- cgit v0.10.2 From 86aae08faa0069a559ba543ff3dab33fe95f891b Mon Sep 17 00:00:00 2001 From: James Nelson Date: Sat, 17 Feb 2007 20:15:38 +0100 Subject: Documentation/kernel-docs.txt update. Signed-off-by: James Nelson Signed-off-by: Adrian Bunk diff --git a/Documentation/kernel-docs.txt b/Documentation/kernel-docs.txt index b53bccb..c68dafe 100644 --- a/Documentation/kernel-docs.txt +++ b/Documentation/kernel-docs.txt @@ -1,10 +1,10 @@ - Index of Documentation for People Interested in Writing and/or - - Understanding the Linux Kernel. - - Juan-Mariano de Goyeneche - + Index of Documentation for People Interested in Writing and/or + + Understanding the Linux Kernel. + + Juan-Mariano de Goyeneche + /* * The latest version of this document may be found at: * http://www.dit.upm.es/~jmseyas/linux/kernel/hackers-docs.html @@ -61,18 +61,18 @@ 13.-The Linux Kernel Sources, A.-Linux Data Structures, B.-The Alpha AXP Processor, C.-Useful Web and FTP Sites, D.-The GNU General Public License, Glossary". In short: a must have. - - * Title: "The Linux Kernel Hackers' Guide" - Author: Michael K.Johnson and others. - URL: http://www.tldp.org/LDP/khg/HyperNews/get/khg.html - Keywords: everything! - Description: No more Postscript book-like version. Only HTML now. - Many people have contributed. The interface is similar to web - available mailing lists archives. You can find some articles and - then some mails asking questions about them and/or complementing - previous contributions. A little bit anarchic in this aspect, but - with some valuable information in some cases. - + + * Title: "Linux Device Drivers, 2nd Edition" + Author: Alessandro Rubini and Jonathan Corbet. + URL: http://www.xml.com/ldd/chapter/book/index.html + Keywords: device drivers, modules, debugging, memory, hardware, + interrupt handling, char drivers, block drivers, kmod, mmap, DMA, + buses. + Description: O'Reilly's popular book, now also on-line under the + GNU Free Documentation License. + Notes: You can also buy it in paper-form from O'Reilly. See below + under BOOKS (Not on-line). + * Title: "Conceptual Architecture of the Linux Kernel" Author: Ivan T. Bowman. URL: http://plg.uwaterloo.ca/~itbowman/papers/CS746G-a1.html @@ -81,17 +81,17 @@ Description: Conceptual software arquitecture of the Linux kernel, automatically extracted from the source code. Very detailed. Good figures. Gives good overall kernel understanding. - + * Title: "Concrete Architecture of the Linux Kernel" Author: Ivan T. Bowman, Saheem Siddiqi, and Meyer C. Tanuan. URL: http://plg.uwaterloo.ca/~itbowman/papers/CS746G-a2.html - Keywords: concrete arquitecture, extracted design, reverse + Keywords: concrete architecture, extracted design, reverse engineering, system structure, dependencies. - Description: Concrete arquitecture of the Linux kernel, + Description: Concrete architecture of the Linux kernel, automatically extracted from the source code. Very detailed. Good figures. Gives good overall kernel understanding. This papers focus on lower details than its predecessor (files, variables...). - + * Title: "Linux as a Case Study: Its Extracted Software Architecture" Author: Ivan T. Bowman, Richard C. Holt and Neil V. Brewster. @@ -101,7 +101,7 @@ Description: Paper appeared at ICSE'99, Los Angeles, May 16-22, 1999. A mixture of the previous two documents from the same author. - + * Title: "Overview of the Virtual File System" Author: Richard Gooch. URL: http://www.atnf.csiro.au/~rgooch/linux/vfs.txt @@ -111,20 +111,20 @@ What is it, how it works, operations taken when opening a file or mounting a file system and description of important data structures explaining the purpose of each of their entries. - + * Title: "The Linux RAID-1, 4, 5 Code" Author: Ingo Molnar, Gadi Oxman and Miguel de Icaza. - URL: http://www2.linuxjournal.com/lj-issues/issue44/2391.html + URL: http://www.linuxjournal.com/article.php?sid=2391 Keywords: RAID, MD driver. Description: Linux Journal Kernel Korner article. Here is it's abstract: "A description of the implementation of the RAID-1, RAID-4 and RAID-5 personalities of the MD device driver in the Linux kernel, providing users with high performance and reliable, secondary-storage capability using software". - + * Title: "Dynamic Kernels: Modularized Device Drivers" Author: Alessandro Rubini. - URL: http://www2.linuxjournal.com/lj-issues/issue23/1219.html + URL: http://www.linuxjournal.com/article.php?sid=1219 Keywords: device driver, module, loading/unloading modules, allocating resources. Description: Linux Journal Kernel Korner article. Here is it's @@ -134,10 +134,10 @@ loadable modules. This installment presents an introduction to the topic, preparing the reader to understand next month's installment". - + * Title: "Dynamic Kernels: Discovery" Author: Alessandro Rubini. - URL: http://www2.linuxjournal.com/lj-issues/issue24/1220.html + URL: http://www.linuxjournal.com/article.php?sid=1220 Keywords: character driver, init_module, clean_up module, autodetection, mayor number, minor number, file operations, open(), close(). @@ -146,20 +146,20 @@ the actual code to create custom module implementing a character device driver. It describes the code for module initialization and cleanup, as well as the open() and close() system calls". - + * Title: "The Devil's in the Details" Author: Georg v. Zezschwitz and Alessandro Rubini. - URL: http://www2.linuxjournal.com/lj-issues/issue25/1221.html + URL: http://www.linuxjournal.com/article.php?sid=1221 Keywords: read(), write(), select(), ioctl(), blocking/non blocking mode, interrupt handler. Description: Linux Journal Kernel Korner article. Here is it's abstract: "This article, the third of four on writing character device drivers, introduces concepts of reading, writing, and using ioctl-calls". - + * Title: "Dissecting Interrupts and Browsing DMA" Author: Alessandro Rubini and Georg v. Zezschwitz. - URL: http://www2.linuxjournal.com/lj-issues/issue26/1222.html + URL: http://www.linuxjournal.com/article.php?sid=1222 Keywords: interrupts, irqs, DMA, bottom halves, task queues. Description: Linux Journal Kernel Korner article. Here is it's abstract: "This is the fourth in a series of articles about @@ -170,10 +170,10 @@ writing, and several different facilities have been provided for different situations. We also investigate the complex topic of DMA". - + * Title: "Device Drivers Concluded" Author: Georg v. Zezschwitz. - URL: http://www2.linuxjournal.com/lj-issues/issue28/1287.html + URL: http://www.linuxjournal.com/article.php?sid=1287 Keywords: address spaces, pages, pagination, page management, demand loading, swapping, memory protection, memory mapping, mmap, virtual memory areas (VMAs), vremap, PCI. @@ -182,10 +182,10 @@ five articles about character device drivers. In this final section, Georg deals with memory mapping devices, beginning with an overall description of the Linux memory management concepts". - + * Title: "Network Buffers And Memory Management" Author: Alan Cox. - URL: http://www2.linuxjournal.com/lj-issues/issue30/1312.html + URL: http://www.linuxjournal.com/article.php?sid=1312 Keywords: sk_buffs, network devices, protocol/link layer variables, network devices flags, transmit, receive, configuration, multicast. @@ -214,28 +214,26 @@ of the Coda filesystem. This version document is meant to describe the current interface (version 1.0) as well as improvements we envisage". - + * Title: "Programming PCI-Devices under Linux" Author: Claus Schroeter. URL: - ftp://ftp.llp.fu-berlin.de/pub/linux/LINUX-LAB/whitepapers/pcip.ps - .gz + ftp://ftp.llp.fu-berlin.de/pub/linux/LINUX-LAB/whitepapers/pcip.ps.gz Keywords: PCI, device, busmastering. Description: 6 pages tutorial on PCI programming under Linux. Gives the basic concepts on the architecture of the PCI subsystem, as long as basic functions and macros to read/write the devices and perform busmastering. - + * Title: "Writing Character Device Driver for Linux" Author: R. Baruch and C. Schroeter. URL: - ftp://ftp.llp.fu-berlin.de/pub/linux/LINUX-LAB/whitepapers/drivers - .ps.gz + ftp://ftp.llp.fu-berlin.de/pub/linux/LINUX-LAB/whitepapers/drivers.ps.gz Keywords: character device drivers, I/O, signals, DMA, accessing ports in user space, kernel environment. Description: 68 pages paper on writing character drivers. A little bit old (1.993, 1.994) although still useful. - + * Title: "Design and Implementation of the Second Extended Filesystem" Author: Rémy Card, Theodore Ts'o, Stephen Tweedie. @@ -249,14 +247,14 @@ e2fsck's passes description... A must read! Notes: This paper was first published in the Proceedings of the First Dutch International Symposium on Linux, ISBN 90-367-0385-9. - + * Title: "Analysis of the Ext2fs structure" Author: Louis-Dominique Dubeau. - URL: http://step.polymtl.ca/~ldd/ext2fs/ext2fs_toc.html + URL: http://www.nondot.org/sabre/os/files/FileSystems/ext2fs/ Keywords: ext2, filesystem, ext2fs. Description: Description of ext2's blocks, directories, inodes, bitmaps, invariants... - + * Title: "Journaling the Linux ext2fs Filesystem" Author: Stephen C. Tweedie. URL: @@ -265,7 +263,7 @@ Description: Excellent 8-pages paper explaining the journaling capabilities added to ext2 by the author, showing different problems faced and the alternatives chosen. - + * Title: "Kernel API changes from 2.0 to 2.2" Author: Richard Gooch. URL: @@ -273,7 +271,7 @@ Keywords: 2.2, changes. Description: Kernel functions/structures/variables which changed from 2.0.x to 2.2.x. - + * Title: "Kernel API changes from 2.2 to 2.4" Author: Richard Gooch. URL: @@ -345,17 +343,7 @@ Notes: Beware: the main page states: "This document may not be published, printed or used in excerpts without explicit permission of the author". Fortunately, it may still be read... - - * Title: "Tour Of the Linux Kernel Source" - Author: Vijo Cherian. - URL: http://www.geocities.com/vijoc/tolks/tolks.html - Keywords: . - Description: A classic of this page! Was lost for a while and is - back again. Thanks Vijo! TOLKS: the name says it all. A tour of - the sources, describing directories, files, variables, data - structures... It covers general stuff, device drivers, - filesystems, IPC and Networking Code. - + * Title: "Linux Kernel Mailing List Glossary" Author: various URL: http://kernelnewbies.org/glossary/ @@ -377,7 +365,17 @@ kernels, but most of it applies to 2.2 too; 2.0 is slightly different". Freely redistributable under the conditions of the GNU General Public License. - + + * Title: "Global spinlock list and usage" + Author: Rick Lindsley. + URL: http://lse.sourceforge.net/lockhier/global-spin-lock + Keywords: spinlock. + Description: This is an attempt to document both the existence and + usage of the spinlocks in the Linux 2.4.5 kernel. Comprehensive + list of spinlocks showing when they are used, which functions + access them, how each lock is acquired, under what conditions it + is held, whether interrupts can occur or not while it is held... + * Title: "Porting Linux 2.0 Drivers To Linux 2.2: Changes and New Features " Author: Alan Cox. @@ -385,70 +383,70 @@ Keywords: ports, porting. Description: Article from Linux Magazine on porting from 2.0 to 2.2 kernels. - + * Title: "Porting Device Drivers To Linux 2.2: part II" Author: Alan Cox. URL: http://www.linux-mag.com/1999-06/gear_01.html Keywords: ports, porting. Description: Second part on porting from 2.0 to 2.2 kernels. - + * Title: "How To Make Sure Your Driver Will Work On The Power Macintosh" Author: Paul Mackerras. URL: http://www.linux-mag.com/1999-07/gear_01.html Keywords: Mac, Power Macintosh, porting, drivers, compatibility. Description: The title says it all. - + * Title: "An Introduction to SCSI Drivers" Author: Alan Cox. URL: http://www.linux-mag.com/1999-08/gear_01.html Keywords: SCSI, device, driver. Description: The title says it all. - + * Title: "Advanced SCSI Drivers And Other Tales" Author: Alan Cox. URL: http://www.linux-mag.com/1999-09/gear_01.html Keywords: SCSI, device, driver, advanced. Description: The title says it all. - + * Title: "Writing Linux Mouse Drivers" Author: Alan Cox. URL: http://www.linux-mag.com/1999-10/gear_01.html Keywords: mouse, driver, gpm. Description: The title says it all. - + * Title: "More on Mouse Drivers" Author: Alan Cox. URL: http://www.linux-mag.com/1999-11/gear_01.html Keywords: mouse, driver, gpm, races, asynchronous I/O. Description: The title still says it all. - + * Title: "Writing Video4linux Radio Driver" Author: Alan Cox. URL: http://www.linux-mag.com/1999-12/gear_01.html Keywords: video4linux, driver, radio, radio devices. Description: The title says it all. - + * Title: "Video4linux Drivers, Part 1: Video-Capture Device" Author: Alan Cox. URL: http://www.linux-mag.com/2000-01/gear_01.html Keywords: video4linux, driver, video capture, capture devices, camera driver. Description: The title says it all. - + * Title: "Video4linux Drivers, Part 2: Video-capture Devices" Author: Alan Cox. URL: http://www.linux-mag.com/2000-02/gear_01.html Keywords: video4linux, driver, video capture, capture devices, camera driver, control, query capabilities, capability, facility. Description: The title says it all. - + * Title: "PCI Management in Linux 2.2" Author: Alan Cox. URL: http://www.linux-mag.com/2000-03/gear_01.html Keywords: PCI, bus, bus-mastering. Description: The title says it all. - + * Title: "Linux 2.4 Kernel Internals" Author: Tigran Aivazian and Christoph Hellwig. URL: http://www.moses.uklinux.net/patches/lki.html @@ -456,13 +454,11 @@ Description: A little book used for a short training course. Covers building the kernel image, booting (including SMP bootup), process management, VFS and more. - + * Title: "Linux IP Networking. A Guide to the Implementation and Modification of the Linux Protocol Stack." Author: Glenn Herrin. - URL: - http://kernelnewbies.org/documents/ipnetworking/linuxipnetworking. - html + URL: http://www.cs.unh.edu/cnrg/gherrin Keywords: network, networking, protocol, IP, UDP, TCP, connection, socket, receiving, transmitting, forwarding, routing, packets, modules, /proc, sk_buff, FIB, tags. @@ -495,7 +491,7 @@ drivers for the Linux PCMCIA Card Services interface. It also describes how to write user-mode utilities for communicating with Card Services. - + * Title: "The Linux Kernel NFSD Implementation" Author: Neil Brown. URL: @@ -591,47 +587,22 @@ Pages: 520. ISBN: 2-212-08932-5 Notes: French. - - * Title: "The Linux Kernel Book" - Author: Remy Card, Eric Dumas, Franck Mevel. - Publisher: John Wiley & Sons. - Date: 1998. - ISBN: 0-471-98141-9 - Notes: English translation. - - * Title: "Linux 2.0" - Author: Remy Card, Eric Dumas, Franck Mevel. - Publisher: Gestión 2000. - Date: 1997. - Pages: 501. - ISBN: 8-480-88208-5 - Notes: Spanish translation. - + * Title: "Unix internals -- the new frontiers" Author: Uresh Vahalia. Publisher: Prentice Hall. Date: 1996. Pages: 600. ISBN: 0-13-101908-2 - - * Title: "Linux Core Kernel Commentary. Guide to Insider's Knowledge - on the Core Kernel of the Linux Code" - Author: Scott Maxwell. - Publisher: Coriolis. - Date: 1999. - Pages: 592. - ISBN: 1-57610-469-9 - Notes: CD-ROM included. Line by line commentary of the kernel - code. - - * Title: "Linux IP Stacks Commentary" - Author: Stephen Satchell and HBJ Clifford. - Publisher: Coriolis. - Date: 2000. - Pages: ???. - ISBN: 1-57610-470-2 - Notes: Line by line source code commentary book. - + + * Title: "The Design and Implementation of the 4.4 BSD UNIX + Operating System" + Author: Marshall Kirk McKusick, Keith Bostic, Michael J. Karels, + John S. Quarterman. + Publisher: Addison-Wesley. + Date: 1996. + ISBN: 0-201-54979-4 + * Title: "Programming for the real world - POSIX.4" Author: Bill O. Gallmeister. Publisher: O'Reilly & Associates, Inc.. @@ -640,18 +611,32 @@ ISBN: I-56592-074-0 Notes: Though not being directly about Linux, Linux aims to be POSIX. Good reference. - - * Title: "Understanding the Linux Kernel" - Author: Daniel P. Bovet and Marco Cesati. - Publisher: O'Reilly & Associates, Inc.. - Date: 2000. - Pages: 702. - ISBN: 0-596-00002-2 - Notes: Further information in - http://www.oreilly.com/catalog/linuxkernel/ - + + * Title: "UNIX Systems for Modern Architectures: Symmetric + Multiprocesssing and Caching for Kernel Programmers" + Author: Curt Schimmel. + Publisher: Addison Wesley. + Date: June, 1994. + Pages: 432. + ISBN: 0-201-63338-8 + + * Title: "The Design and Implementation of the 4.3 BSD UNIX + Operating System" + Author: Samuel J. Leffler, Marshall Kirk McKusick, Michael J. + Karels, John S. Quarterman. + Publisher: Addison-Wesley. + Date: 1989 (reprinted with corrections on October, 1990). + ISBN: 0-201-06196-1 + + * Title: "The Design of the UNIX Operating System" + Author: Maurice J. Bach. + Publisher: Prentice Hall. + Date: 1986. + Pages: 471. + ISBN: 0-13-201757-1 + MISCELLANEOUS: - + * Name: linux/Documentation Author: Many. URL: Just look inside your kernel sources. @@ -660,7 +645,7 @@ inside the Documentation directory. Some pages from this document (including this document itself) have been moved there, and might be more up to date than the web version. - + * Name: "Linux Source Driver" URL: http://lsd.linux.cz Keywords: Browsing source code. @@ -671,7 +656,7 @@ you can search Linux kernel (fulltext, macros, types, functions and variables) and LSD can generate patches for you on the fly (files, directories or kernel)". - + * Name: "Linux Kernel Source Reference" Author: Thomas Graichen. URL: http://innominate.org/~graichen/projects/lksr/ @@ -681,27 +666,27 @@ sources of any version starting from 1.0 up to the (daily updated) current version available. Also you can check the differences between two versions of a file". - + * Name: "Cross-Referencing Linux" URL: http://lxr.linux.no/source/ Keywords: Browsing source code. Description: Another web-based Linux kernel source code browser. Lots of cross references to variables and functions. You can see where they are defined and where they are used. - + * Name: "Linux Weekly News" URL: http://lwn.net Keywords: latest kernel news. Description: The title says it all. There's a fixed kernel section summarizing developers' work, bug fixes, new features and versions produced during the week. Published every Thursday. - + * Name: "Kernel Traffic" - URL: http://www.kerneltraffic.org/kernel-traffic/ + URL: http://kt.zork.net/kernel-traffic/ Keywords: linux-kernel mailing list, weekly kernel news. Description: Weekly newsletter covering the most relevant discussions of the linux-kernel mailing list. - + * Name: "CuTTiNG.eDGe.LiNuX" URL: http://edge.kernelnotes.org Keywords: changelist. @@ -709,7 +694,7 @@ release. What's new, what's better, what's changed. Myrdraal reads the patches and describes them. Pointers to the patches are there, too. - + * Name: "New linux-kernel Mailing List FAQ" URL: http://www.tux.org/lkml/ Keywords: linux-kernel mailing list FAQ. @@ -719,7 +704,7 @@ it. Read it to see how to join the mailing list. Dozens of interesting questions regarding the list, Linux, developers (who is ...?), terms (what is...?) are answered here too. Just read it. - + * Name: "Linux Virtual File System" Author: Peter J. Braam. URL: http://www.coda.cs.cmu.edu/doc/talks/linuxvfs/ @@ -727,10 +712,10 @@ Description: Set of slides, presumably from a presentation on the Linux VFS layer. Covers version 2.1.x, with dentries and the dcache. - + * Name: "Gary's Encyclopedia - The Linux Kernel" Author: Gary (I suppose...). - URL: http://members.aa.net/~swear/pedia/kernel.html + URL: http://www.lisoleg.net/cgi-bin/lisoleg.pl?view=kernel.htm Keywords: links, not found here?. Description: Gary's Encyclopedia exists to allow the rapid finding of documentation and other information of interest to GNU/Linux @@ -738,7 +723,7 @@ categories. This link is for kernel-specific links, documents, sites... Look there if you could not find here what you were looking for. - + * Name: "The home page of Linux-MM" Author: The Linux-MM team. URL: http://linux-mm.org/ @@ -747,7 +732,7 @@ Description: Site devoted to Linux Memory Management development. Memory related patches, HOWTOs, links, mm developers... Don't miss it if you are interested in memory management development! - + * Name: "Kernel Newbies IRC Channel" URL: http://www.kernelnewbies.org Keywords: IRC, newbies, channel, asking doubts. -- cgit v0.10.2