From 5b83b2234be6733cfe22036c38031b2c890b3db8 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Thu, 21 May 2015 15:51:52 -0700 Subject: mmc: omap_hsmmc: Change wake-up interrupt to use generic wakeirq We can now use generic wakeirq handling and remove the custom handling for the wake-up interrupts. Acked-by: Ulf Hansson Signed-off-by: Tony Lindgren diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c index 9df2b68..b2b411d 100644 --- a/drivers/mmc/host/omap_hsmmc.c +++ b/drivers/mmc/host/omap_hsmmc.c @@ -43,6 +43,7 @@ #include #include #include +#include #include /* OMAP HSMMC Host Controller Registers */ @@ -218,7 +219,6 @@ struct omap_hsmmc_host { unsigned int flags; #define AUTO_CMD23 (1 << 0) /* Auto CMD23 support */ #define HSMMC_SDIO_IRQ_ENABLED (1 << 1) /* SDIO irq enabled */ -#define HSMMC_WAKE_IRQ_ENABLED (1 << 2) struct omap_hsmmc_next next_data; struct omap_hsmmc_platform_data *pdata; @@ -1117,22 +1117,6 @@ static irqreturn_t omap_hsmmc_irq(int irq, void *dev_id) return IRQ_HANDLED; } -static irqreturn_t omap_hsmmc_wake_irq(int irq, void *dev_id) -{ - struct omap_hsmmc_host *host = dev_id; - - /* cirq is level triggered, disable to avoid infinite loop */ - spin_lock(&host->irq_lock); - if (host->flags & HSMMC_WAKE_IRQ_ENABLED) { - disable_irq_nosync(host->wake_irq); - host->flags &= ~HSMMC_WAKE_IRQ_ENABLED; - } - spin_unlock(&host->irq_lock); - pm_request_resume(host->dev); /* no use counter */ - - return IRQ_HANDLED; -} - static void set_sd_bus_power(struct omap_hsmmc_host *host) { unsigned long i; @@ -1665,7 +1649,6 @@ static void omap_hsmmc_enable_sdio_irq(struct mmc_host *mmc, int enable) static int omap_hsmmc_configure_wake_irq(struct omap_hsmmc_host *host) { - struct mmc_host *mmc = host->mmc; int ret; /* @@ -1677,11 +1660,7 @@ static int omap_hsmmc_configure_wake_irq(struct omap_hsmmc_host *host) if (!host->dev->of_node || !host->wake_irq) return -ENODEV; - /* Prevent auto-enabling of IRQ */ - irq_set_status_flags(host->wake_irq, IRQ_NOAUTOEN); - ret = devm_request_irq(host->dev, host->wake_irq, omap_hsmmc_wake_irq, - IRQF_TRIGGER_LOW | IRQF_ONESHOT, - mmc_hostname(mmc), host); + ret = dev_pm_set_dedicated_wake_irq(host->dev, host->wake_irq); if (ret) { dev_err(mmc_dev(host->mmc), "Unable to request wake IRQ\n"); goto err; @@ -1718,7 +1697,7 @@ static int omap_hsmmc_configure_wake_irq(struct omap_hsmmc_host *host) return 0; err_free_irq: - devm_free_irq(host->dev, host->wake_irq, host); + dev_pm_clear_wake_irq(host->dev); err: dev_warn(host->dev, "no SDIO IRQ support, falling back to polling\n"); host->wake_irq = 0; @@ -2007,6 +1986,7 @@ static int omap_hsmmc_probe(struct platform_device *pdev) omap_hsmmc_ops.multi_io_quirk = omap_hsmmc_multi_io_quirk; } + device_init_wakeup(&pdev->dev, true); pm_runtime_enable(host->dev); pm_runtime_get_sync(host->dev); pm_runtime_set_autosuspend_delay(host->dev, MMC_AUTOSUSPEND_DELAY); @@ -2147,6 +2127,7 @@ err_slot_name: if (host->use_reg) omap_hsmmc_reg_put(host); err_irq: + device_init_wakeup(&pdev->dev, false); if (host->tx_chan) dma_release_channel(host->tx_chan); if (host->rx_chan) @@ -2178,6 +2159,7 @@ static int omap_hsmmc_remove(struct platform_device *pdev) pm_runtime_put_sync(host->dev); pm_runtime_disable(host->dev); + device_init_wakeup(&pdev->dev, false); if (host->dbclk) clk_disable_unprepare(host->dbclk); @@ -2204,11 +2186,6 @@ static int omap_hsmmc_suspend(struct device *dev) OMAP_HSMMC_READ(host->base, HCTL) & ~SDBP); } - /* do not wake up due to sdio irq */ - if ((host->mmc->caps & MMC_CAP_SDIO_IRQ) && - !(host->mmc->pm_flags & MMC_PM_WAKE_SDIO_IRQ)) - disable_irq(host->wake_irq); - if (host->dbclk) clk_disable_unprepare(host->dbclk); @@ -2233,11 +2210,6 @@ static int omap_hsmmc_resume(struct device *dev) omap_hsmmc_conf_bus_power(host); omap_hsmmc_protect_card(host); - - if ((host->mmc->caps & MMC_CAP_SDIO_IRQ) && - !(host->mmc->pm_flags & MMC_PM_WAKE_SDIO_IRQ)) - enable_irq(host->wake_irq); - pm_runtime_mark_last_busy(host->dev); pm_runtime_put_autosuspend(host->dev); return 0; @@ -2277,10 +2249,6 @@ static int omap_hsmmc_runtime_suspend(struct device *dev) } pinctrl_pm_select_idle_state(dev); - - WARN_ON(host->flags & HSMMC_WAKE_IRQ_ENABLED); - enable_irq(host->wake_irq); - host->flags |= HSMMC_WAKE_IRQ_ENABLED; } else { pinctrl_pm_select_idle_state(dev); } @@ -2302,11 +2270,6 @@ static int omap_hsmmc_runtime_resume(struct device *dev) spin_lock_irqsave(&host->irq_lock, flags); if ((host->mmc->caps & MMC_CAP_SDIO_IRQ) && (host->flags & HSMMC_SDIO_IRQ_ENABLED)) { - /* sdio irq flag can't change while in runtime suspend */ - if (host->flags & HSMMC_WAKE_IRQ_ENABLED) { - disable_irq_nosync(host->wake_irq); - host->flags &= ~HSMMC_WAKE_IRQ_ENABLED; - } pinctrl_pm_select_default_state(host->dev); -- cgit v0.10.2 From ee83bd3b6483d59b0d4b509e46dae688d8e5759d Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Tue, 9 Jun 2015 23:35:00 -0700 Subject: serial: omap: Switch wake-up interrupt to generic wakeirq We can now use generic wakeirq handling and remove the custom handling for the wake-up interrupts. Acked-by: Greg Kroah-Hartman Signed-off-by: Tony Lindgren diff --git a/drivers/tty/serial/omap-serial.c b/drivers/tty/serial/omap-serial.c index 7f49172..7a2172b 100644 --- a/drivers/tty/serial/omap-serial.c +++ b/drivers/tty/serial/omap-serial.c @@ -38,6 +38,7 @@ #include #include #include +#include #include #include #include @@ -160,7 +161,6 @@ struct uart_omap_port { unsigned long port_activity; int context_loss_cnt; u32 errata; - u8 wakeups_enabled; u32 features; int rts_gpio; @@ -209,28 +209,11 @@ static int serial_omap_get_context_loss_count(struct uart_omap_port *up) return pdata->get_context_loss_count(up->dev); } -static inline void serial_omap_enable_wakeirq(struct uart_omap_port *up, - bool enable) -{ - if (!up->wakeirq) - return; - - if (enable) - enable_irq(up->wakeirq); - else - disable_irq_nosync(up->wakeirq); -} - +/* REVISIT: Remove this when omap3 boots in device tree only mode */ static void serial_omap_enable_wakeup(struct uart_omap_port *up, bool enable) { struct omap_uart_port_info *pdata = dev_get_platdata(up->dev); - if (enable == up->wakeups_enabled) - return; - - serial_omap_enable_wakeirq(up, enable); - up->wakeups_enabled = enable; - if (!pdata || !pdata->enable_wakeup) return; @@ -750,13 +733,11 @@ static int serial_omap_startup(struct uart_port *port) /* Optional wake-up IRQ */ if (up->wakeirq) { - retval = request_irq(up->wakeirq, serial_omap_irq, - up->port.irqflags, up->name, up); + retval = dev_pm_set_dedicated_wake_irq(up->dev, up->wakeirq); if (retval) { free_irq(up->port.irq, up); return retval; } - disable_irq(up->wakeirq); } dev_dbg(up->port.dev, "serial_omap_startup+%d\n", up->port.line); @@ -845,8 +826,7 @@ static void serial_omap_shutdown(struct uart_port *port) pm_runtime_mark_last_busy(up->dev); pm_runtime_put_autosuspend(up->dev); free_irq(up->port.irq, up); - if (up->wakeirq) - free_irq(up->wakeirq, up); + dev_pm_clear_wake_irq(up->dev); } static void serial_omap_uart_qos_work(struct work_struct *work) @@ -1139,13 +1119,6 @@ serial_omap_pm(struct uart_port *port, unsigned int state, serial_out(up, UART_EFR, efr); serial_out(up, UART_LCR, 0); - if (!device_may_wakeup(up->dev)) { - if (!state) - pm_runtime_forbid(up->dev); - else - pm_runtime_allow(up->dev); - } - pm_runtime_mark_last_busy(up->dev); pm_runtime_put_autosuspend(up->dev); } -- cgit v0.10.2 From a3e362f18c01f28abcb6d8e5d00be8b5d97ea09d Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Tue, 9 Jun 2015 23:35:00 -0700 Subject: serial: 8250_omap: Move wake-up interrupt to generic wakeirq We can now use generic wakeirq handling and remove the custom handling for the wake-up interrupts. Acked-by: Greg Kroah-Hartman Signed-off-by: Tony Lindgren diff --git a/drivers/tty/serial/8250/8250_omap.c b/drivers/tty/serial/8250/8250_omap.c index 9782043..d75a66c 100644 --- a/drivers/tty/serial/8250/8250_omap.c +++ b/drivers/tty/serial/8250/8250_omap.c @@ -22,6 +22,7 @@ #include #include #include +#include #include #include "8250.h" @@ -552,17 +553,6 @@ static void omap8250_uart_qos_work(struct work_struct *work) pm_qos_update_request(&priv->pm_qos_request, priv->latency); } -static irqreturn_t omap_wake_irq(int irq, void *dev_id) -{ - struct uart_port *port = dev_id; - int ret; - - ret = port->handle_irq(port); - if (ret) - return IRQ_HANDLED; - return IRQ_NONE; -} - #ifdef CONFIG_SERIAL_8250_DMA static int omap_8250_dma_handle_irq(struct uart_port *port); #endif @@ -596,11 +586,9 @@ static int omap_8250_startup(struct uart_port *port) int ret; if (priv->wakeirq) { - ret = request_irq(priv->wakeirq, omap_wake_irq, - port->irqflags, "uart wakeup irq", port); + ret = dev_pm_set_dedicated_wake_irq(port->dev, priv->wakeirq); if (ret) return ret; - disable_irq(priv->wakeirq); } pm_runtime_get_sync(port->dev); @@ -649,8 +637,7 @@ static int omap_8250_startup(struct uart_port *port) err: pm_runtime_mark_last_busy(port->dev); pm_runtime_put_autosuspend(port->dev); - if (priv->wakeirq) - free_irq(priv->wakeirq, port); + dev_pm_clear_wake_irq(port->dev); return ret; } @@ -682,10 +669,8 @@ static void omap_8250_shutdown(struct uart_port *port) pm_runtime_mark_last_busy(port->dev); pm_runtime_put_autosuspend(port->dev); - free_irq(port->irq, port); - if (priv->wakeirq) - free_irq(priv->wakeirq, port); + dev_pm_clear_wake_irq(port->dev); } static void omap_8250_throttle(struct uart_port *port) @@ -1226,31 +1211,6 @@ static int omap8250_remove(struct platform_device *pdev) return 0; } -#ifdef CONFIG_PM - -static inline void omap8250_enable_wakeirq(struct omap8250_priv *priv, - bool enable) -{ - if (!priv->wakeirq) - return; - - if (enable) - enable_irq(priv->wakeirq); - else - disable_irq_nosync(priv->wakeirq); -} - -static void omap8250_enable_wakeup(struct omap8250_priv *priv, - bool enable) -{ - if (enable == priv->wakeups_enabled) - return; - - omap8250_enable_wakeirq(priv, enable); - priv->wakeups_enabled = enable; -} -#endif - #ifdef CONFIG_PM_SLEEP static int omap8250_prepare(struct device *dev) { @@ -1277,11 +1237,6 @@ static int omap8250_suspend(struct device *dev) serial8250_suspend_port(priv->line); flush_work(&priv->qos_work); - - if (device_may_wakeup(dev)) - omap8250_enable_wakeup(priv, true); - else - omap8250_enable_wakeup(priv, false); return 0; } @@ -1289,9 +1244,6 @@ static int omap8250_resume(struct device *dev) { struct omap8250_priv *priv = dev_get_drvdata(dev); - if (device_may_wakeup(dev)) - omap8250_enable_wakeup(priv, false); - serial8250_resume_port(priv->line); return 0; } @@ -1333,7 +1285,6 @@ static int omap8250_runtime_suspend(struct device *dev) return -EBUSY; } - omap8250_enable_wakeup(priv, true); if (up->dma) omap_8250_rx_dma(up, UART_IIR_RX_TIMEOUT); @@ -1354,7 +1305,6 @@ static int omap8250_runtime_resume(struct device *dev) return 0; up = serial8250_get_port(priv->line); - omap8250_enable_wakeup(priv, false); loss_cntx = omap8250_lost_context(up); if (loss_cntx) -- cgit v0.10.2 From 8c19a731a1a8b1f447a972174d2b2fe30d625518 Mon Sep 17 00:00:00 2001 From: Thomas Petazzoni Date: Thu, 11 Jun 2015 13:56:32 +0200 Subject: ARM: mvebu: adjust Armada XP DT spi muxing after pinctrl function rename Following the merge of "pinctrl: mvebu: armada-xp: rename spi to spi0" by Linus Walleij, we need to adjust the Armada XP Device Tree accordingly, by adjusting the pinctrl configuration for SPI pins. Signed-off-by: Thomas Petazzoni Acked-by: Gregory CLEMENT Signed-off-by: Gregory CLEMENT diff --git a/arch/arm/boot/dts/armada-xp.dtsi b/arch/arm/boot/dts/armada-xp.dtsi index e78ce4a..58eaef4 100644 --- a/arch/arm/boot/dts/armada-xp.dtsi +++ b/arch/arm/boot/dts/armada-xp.dtsi @@ -297,7 +297,7 @@ spi0_pins: spi0-pins { marvell,pins = "mpp36", "mpp37", "mpp38", "mpp39"; - marvell,function = "spi"; + marvell,function = "spi0"; }; uart2_pins: uart2-pins { -- cgit v0.10.2 From 2f5bc307be2480ba89e4c5d118f406f04a4a7299 Mon Sep 17 00:00:00 2001 From: Thomas Petazzoni Date: Tue, 16 Jun 2015 14:12:57 +0200 Subject: ARM: mvebu: fix suspend to RAM on big-endian configurations The current Armada XP suspend to RAM implementation, as added in commit 27432825ae19f ("ARM: mvebu: Armada XP GP specific suspend/resume code") does not handle big-endian configurations properly: the small bit of assembly code putting the DRAM in self-refresh and toggling the GPIOs to turn off power forgets to convert the values to little-endian. This commit fixes that by making sure the two values we will write to the DRAM controller register and GPIO register are already in little-endian before entering the critical assembly code. Signed-off-by: Thomas Petazzoni Cc: # v3.19+ Fixes: 27432825ae19f ("ARM: mvebu: Armada XP GP specific suspend/resume code") diff --git a/arch/arm/mach-mvebu/pm-board.c b/arch/arm/mach-mvebu/pm-board.c index 6dfd4ab..301ab38 100644 --- a/arch/arm/mach-mvebu/pm-board.c +++ b/arch/arm/mach-mvebu/pm-board.c @@ -43,6 +43,9 @@ static void mvebu_armada_xp_gp_pm_enter(void __iomem *sdram_reg, u32 srcmd) for (i = 0; i < ARMADA_XP_GP_PIC_NR_GPIOS; i++) ackcmd |= BIT(pic_raw_gpios[i]); + srcmd = cpu_to_le32(srcmd); + ackcmd = cpu_to_le32(ackcmd); + /* * Wait a while, the PIC needs quite a bit of time between the * two GPIO commands. -- cgit v0.10.2 From 5d6bed2a9c8bc161bff4cc7cede00f2e0e27a7e7 Mon Sep 17 00:00:00 2001 From: Russell King Date: Mon, 22 Jun 2015 18:39:43 +0100 Subject: ARM: dove: fix legacy dove IRQ numbers v3.18 changed handle_IRQ() to call __handle_domain_irq(), which now rejects attempts to deliver IRQ0. Since IRQ 0 is used as the timer interrupt (just like the PIT on x86), this causes boot to fail as the bogomips calibration never completes. Fix this by shuffling all interrupts up by one. Fixes: a71b092a9c68 ("ARM: Convert handle_IRQ to use __handle_domain_irq") Signed-off-by: Russell King Signed-off-by: Gregory CLEMENT diff --git a/arch/arm/mach-dove/include/mach/irqs.h b/arch/arm/mach-dove/include/mach/irqs.h index 03d401d..3f29e6bc 100644 --- a/arch/arm/mach-dove/include/mach/irqs.h +++ b/arch/arm/mach-dove/include/mach/irqs.h @@ -14,73 +14,73 @@ /* * Dove Low Interrupt Controller */ -#define IRQ_DOVE_BRIDGE 0 -#define IRQ_DOVE_H2C 1 -#define IRQ_DOVE_C2H 2 -#define IRQ_DOVE_NAND 3 -#define IRQ_DOVE_PDMA 4 -#define IRQ_DOVE_SPI1 5 -#define IRQ_DOVE_SPI0 6 -#define IRQ_DOVE_UART_0 7 -#define IRQ_DOVE_UART_1 8 -#define IRQ_DOVE_UART_2 9 -#define IRQ_DOVE_UART_3 10 -#define IRQ_DOVE_I2C 11 -#define IRQ_DOVE_GPIO_0_7 12 -#define IRQ_DOVE_GPIO_8_15 13 -#define IRQ_DOVE_GPIO_16_23 14 -#define IRQ_DOVE_PCIE0_ERR 15 -#define IRQ_DOVE_PCIE0 16 -#define IRQ_DOVE_PCIE1_ERR 17 -#define IRQ_DOVE_PCIE1 18 -#define IRQ_DOVE_I2S0 19 -#define IRQ_DOVE_I2S0_ERR 20 -#define IRQ_DOVE_I2S1 21 -#define IRQ_DOVE_I2S1_ERR 22 -#define IRQ_DOVE_USB_ERR 23 -#define IRQ_DOVE_USB0 24 -#define IRQ_DOVE_USB1 25 -#define IRQ_DOVE_GE00_RX 26 -#define IRQ_DOVE_GE00_TX 27 -#define IRQ_DOVE_GE00_MISC 28 -#define IRQ_DOVE_GE00_SUM 29 -#define IRQ_DOVE_GE00_ERR 30 -#define IRQ_DOVE_CRYPTO 31 +#define IRQ_DOVE_BRIDGE (1 + 0) +#define IRQ_DOVE_H2C (1 + 1) +#define IRQ_DOVE_C2H (1 + 2) +#define IRQ_DOVE_NAND (1 + 3) +#define IRQ_DOVE_PDMA (1 + 4) +#define IRQ_DOVE_SPI1 (1 + 5) +#define IRQ_DOVE_SPI0 (1 + 6) +#define IRQ_DOVE_UART_0 (1 + 7) +#define IRQ_DOVE_UART_1 (1 + 8) +#define IRQ_DOVE_UART_2 (1 + 9) +#define IRQ_DOVE_UART_3 (1 + 10) +#define IRQ_DOVE_I2C (1 + 11) +#define IRQ_DOVE_GPIO_0_7 (1 + 12) +#define IRQ_DOVE_GPIO_8_15 (1 + 13) +#define IRQ_DOVE_GPIO_16_23 (1 + 14) +#define IRQ_DOVE_PCIE0_ERR (1 + 15) +#define IRQ_DOVE_PCIE0 (1 + 16) +#define IRQ_DOVE_PCIE1_ERR (1 + 17) +#define IRQ_DOVE_PCIE1 (1 + 18) +#define IRQ_DOVE_I2S0 (1 + 19) +#define IRQ_DOVE_I2S0_ERR (1 + 20) +#define IRQ_DOVE_I2S1 (1 + 21) +#define IRQ_DOVE_I2S1_ERR (1 + 22) +#define IRQ_DOVE_USB_ERR (1 + 23) +#define IRQ_DOVE_USB0 (1 + 24) +#define IRQ_DOVE_USB1 (1 + 25) +#define IRQ_DOVE_GE00_RX (1 + 26) +#define IRQ_DOVE_GE00_TX (1 + 27) +#define IRQ_DOVE_GE00_MISC (1 + 28) +#define IRQ_DOVE_GE00_SUM (1 + 29) +#define IRQ_DOVE_GE00_ERR (1 + 30) +#define IRQ_DOVE_CRYPTO (1 + 31) /* * Dove High Interrupt Controller */ -#define IRQ_DOVE_AC97 32 -#define IRQ_DOVE_PMU 33 -#define IRQ_DOVE_CAM 34 -#define IRQ_DOVE_SDIO0 35 -#define IRQ_DOVE_SDIO1 36 -#define IRQ_DOVE_SDIO0_WAKEUP 37 -#define IRQ_DOVE_SDIO1_WAKEUP 38 -#define IRQ_DOVE_XOR_00 39 -#define IRQ_DOVE_XOR_01 40 -#define IRQ_DOVE_XOR0_ERR 41 -#define IRQ_DOVE_XOR_10 42 -#define IRQ_DOVE_XOR_11 43 -#define IRQ_DOVE_XOR1_ERR 44 -#define IRQ_DOVE_LCD_DCON 45 -#define IRQ_DOVE_LCD1 46 -#define IRQ_DOVE_LCD0 47 -#define IRQ_DOVE_GPU 48 -#define IRQ_DOVE_PERFORM_MNTR 49 -#define IRQ_DOVE_VPRO_DMA1 51 -#define IRQ_DOVE_SSP_TIMER 54 -#define IRQ_DOVE_SSP 55 -#define IRQ_DOVE_MC_L2_ERR 56 -#define IRQ_DOVE_CRYPTO_ERR 59 -#define IRQ_DOVE_GPIO_24_31 60 -#define IRQ_DOVE_HIGH_GPIO 61 -#define IRQ_DOVE_SATA 62 +#define IRQ_DOVE_AC97 (1 + 32) +#define IRQ_DOVE_PMU (1 + 33) +#define IRQ_DOVE_CAM (1 + 34) +#define IRQ_DOVE_SDIO0 (1 + 35) +#define IRQ_DOVE_SDIO1 (1 + 36) +#define IRQ_DOVE_SDIO0_WAKEUP (1 + 37) +#define IRQ_DOVE_SDIO1_WAKEUP (1 + 38) +#define IRQ_DOVE_XOR_00 (1 + 39) +#define IRQ_DOVE_XOR_01 (1 + 40) +#define IRQ_DOVE_XOR0_ERR (1 + 41) +#define IRQ_DOVE_XOR_10 (1 + 42) +#define IRQ_DOVE_XOR_11 (1 + 43) +#define IRQ_DOVE_XOR1_ERR (1 + 44) +#define IRQ_DOVE_LCD_DCON (1 + 45) +#define IRQ_DOVE_LCD1 (1 + 46) +#define IRQ_DOVE_LCD0 (1 + 47) +#define IRQ_DOVE_GPU (1 + 48) +#define IRQ_DOVE_PERFORM_MNTR (1 + 49) +#define IRQ_DOVE_VPRO_DMA1 (1 + 51) +#define IRQ_DOVE_SSP_TIMER (1 + 54) +#define IRQ_DOVE_SSP (1 + 55) +#define IRQ_DOVE_MC_L2_ERR (1 + 56) +#define IRQ_DOVE_CRYPTO_ERR (1 + 59) +#define IRQ_DOVE_GPIO_24_31 (1 + 60) +#define IRQ_DOVE_HIGH_GPIO (1 + 61) +#define IRQ_DOVE_SATA (1 + 62) /* * DOVE General Purpose Pins */ -#define IRQ_DOVE_GPIO_START 64 +#define IRQ_DOVE_GPIO_START 65 #define NR_GPIO_IRQS 64 /* diff --git a/arch/arm/mach-dove/irq.c b/arch/arm/mach-dove/irq.c index 4a5a7ae..df0223f 100644 --- a/arch/arm/mach-dove/irq.c +++ b/arch/arm/mach-dove/irq.c @@ -126,14 +126,14 @@ __exception_irq_entry dove_legacy_handle_irq(struct pt_regs *regs) stat = readl_relaxed(dove_irq_base + IRQ_CAUSE_LOW_OFF); stat &= readl_relaxed(dove_irq_base + IRQ_MASK_LOW_OFF); if (stat) { - unsigned int hwirq = __fls(stat); + unsigned int hwirq = 1 + __fls(stat); handle_IRQ(hwirq, regs); return; } stat = readl_relaxed(dove_irq_base + IRQ_CAUSE_HIGH_OFF); stat &= readl_relaxed(dove_irq_base + IRQ_MASK_HIGH_OFF); if (stat) { - unsigned int hwirq = 32 + __fls(stat); + unsigned int hwirq = 33 + __fls(stat); handle_IRQ(hwirq, regs); return; } @@ -144,8 +144,8 @@ void __init dove_init_irq(void) { int i; - orion_irq_init(0, IRQ_VIRT_BASE + IRQ_MASK_LOW_OFF); - orion_irq_init(32, IRQ_VIRT_BASE + IRQ_MASK_HIGH_OFF); + orion_irq_init(1, IRQ_VIRT_BASE + IRQ_MASK_LOW_OFF); + orion_irq_init(33, IRQ_VIRT_BASE + IRQ_MASK_HIGH_OFF); #ifdef CONFIG_MULTI_IRQ_HANDLER set_handle_irq(dove_legacy_handle_irq); -- cgit v0.10.2 From 498f09bce4dc0a2803df7fc25befbdb249074b85 Mon Sep 17 00:00:00 2001 From: Stephen Boyd Date: Tue, 2 Jun 2015 12:12:58 -0700 Subject: soc: qcom: spm: Fix idle on THUMB2 kernels The ifc6410 firmware always enters the kernel in ARM state from deep idle. Use the cpu_resume_arm() wrapper instead of cpu_resume() to property switch into the THUMB2 state when we wake up from idle. This fixes a problem reported by Kevin Hilman on next-20150601 where the ifc6410 fails to boot a THUMB2 kernel because the platform's firmware always enters the kernel in ARM mode from deep idle states. Reported-by: Kevin Hilman Cc: Ard Biesheuvel Cc: Lina Iyer Signed-off-by: Stephen Boyd Signed-off-by: Kevin Hilman diff --git a/drivers/soc/qcom/spm.c b/drivers/soc/qcom/spm.c index b562af8..b04b05a 100644 --- a/drivers/soc/qcom/spm.c +++ b/drivers/soc/qcom/spm.c @@ -260,7 +260,7 @@ static int __init qcom_cpuidle_init(struct device_node *cpu_node, int cpu) /* We have atleast one power down mode */ cpumask_clear(&mask); cpumask_set_cpu(cpu, &mask); - qcom_scm_set_warm_boot_addr(cpu_resume, &mask); + qcom_scm_set_warm_boot_addr(cpu_resume_arm, &mask); } per_cpu(qcom_idle_ops, cpu) = fns; -- cgit v0.10.2 From ea21feb37e753213a093e1f77b2c05ce57997ccd Mon Sep 17 00:00:00 2001 From: Y Vo Date: Tue, 16 Jun 2015 16:49:44 +0700 Subject: arm64: dts: Add APM X-Gene standby GPIO controller DTS entries Add standby domain gpio controller for APM X-Gene SoC platform. Signed-off-by: Y Vo Acked-by: Linus Walleij Signed-off-by: Kevin Hilman diff --git a/arch/arm64/boot/dts/apm/apm-storm.dtsi b/arch/arm64/boot/dts/apm/apm-storm.dtsi index c8d3e0e..6bbab95 100644 --- a/arch/arm64/boot/dts/apm/apm-storm.dtsi +++ b/arch/arm64/boot/dts/apm/apm-storm.dtsi @@ -607,6 +607,19 @@ phy-names = "sata-phy"; }; + sbgpio: sbgpio@17001000{ + compatible = "apm,xgene-gpio-sb"; + reg = <0x0 0x17001000 0x0 0x400>; + #gpio-cells = <2>; + gpio-controller; + interrupts = <0x0 0x28 0x1>, + <0x0 0x29 0x1>, + <0x0 0x2a 0x1>, + <0x0 0x2b 0x1>, + <0x0 0x2c 0x1>, + <0x0 0x2d 0x1>; + }; + rtc: rtc@10510000 { compatible = "apm,xgene-rtc"; reg = <0x0 0x10510000 0x0 0x400>; -- cgit v0.10.2 From 50f0a44991516b5b9744ecb2c080c2ec6ad21b25 Mon Sep 17 00:00:00 2001 From: Nicolas Ferre Date: Wed, 17 Jun 2015 10:59:04 +0200 Subject: ARM: at91/dt: trivial: fix USB udc compatible string To please checkpatch and the tiresome reader, add the "atmel," prefix to the USB udc compatible string. Signed-off-by: Nicolas Ferre Cc: #4.0+ Signed-off-by: Kevin Hilman diff --git a/Documentation/devicetree/bindings/usb/atmel-usb.txt b/Documentation/devicetree/bindings/usb/atmel-usb.txt index 1be8d7a..5883b73 100644 --- a/Documentation/devicetree/bindings/usb/atmel-usb.txt +++ b/Documentation/devicetree/bindings/usb/atmel-usb.txt @@ -79,9 +79,9 @@ Atmel High-Speed USB device controller Required properties: - compatible: Should be one of the following - "at91sam9rl-udc" - "at91sam9g45-udc" - "sama5d3-udc" + "atmel,at91sam9rl-udc" + "atmel,at91sam9g45-udc" + "atmel,sama5d3-udc" - reg: Address and length of the register set for the device - interrupts: Should contain usba interrupt - clocks: Should reference the peripheral and host clocks -- cgit v0.10.2 From 6540165cf41655810ee67b78f01537af022a636a Mon Sep 17 00:00:00 2001 From: Boris Brezillon Date: Wed, 17 Jun 2015 10:59:05 +0200 Subject: ARM: at91/dt: update udc compatible strings at91sam9g45, at91sam9x5 and sama5 SoCs should not use "atmel,at91sam9rl-udc" for their USB device compatible property since this compatible is attached to a specific hardware bug fix. Signed-off-by: Boris Brezillon Acked-by: Alexandre Belloni Tested-by: Bo Shen Acked-by: Nicolas Ferre Cc: #4.0+ Signed-off-by: Kevin Hilman diff --git a/arch/arm/boot/dts/at91sam9g45.dtsi b/arch/arm/boot/dts/at91sam9g45.dtsi index d260ba7..18177f5 100644 --- a/arch/arm/boot/dts/at91sam9g45.dtsi +++ b/arch/arm/boot/dts/at91sam9g45.dtsi @@ -1148,7 +1148,7 @@ usb2: gadget@fff78000 { #address-cells = <1>; #size-cells = <0>; - compatible = "atmel,at91sam9rl-udc"; + compatible = "atmel,at91sam9g45-udc"; reg = <0x00600000 0x80000 0xfff78000 0x400>; interrupts = <27 IRQ_TYPE_LEVEL_HIGH 0>; diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi index 7521bdf..b6c8df8 100644 --- a/arch/arm/boot/dts/at91sam9x5.dtsi +++ b/arch/arm/boot/dts/at91sam9x5.dtsi @@ -1108,7 +1108,7 @@ usb2: gadget@f803c000 { #address-cells = <1>; #size-cells = <0>; - compatible = "atmel,at91sam9rl-udc"; + compatible = "atmel,at91sam9g45-udc"; reg = <0x00500000 0x80000 0xf803c000 0x400>; interrupts = <23 IRQ_TYPE_LEVEL_HIGH 0>; diff --git a/arch/arm/boot/dts/sama5d3.dtsi b/arch/arm/boot/dts/sama5d3.dtsi index 5ab7548..9e2444b 100644 --- a/arch/arm/boot/dts/sama5d3.dtsi +++ b/arch/arm/boot/dts/sama5d3.dtsi @@ -1321,7 +1321,7 @@ usb0: gadget@00500000 { #address-cells = <1>; #size-cells = <0>; - compatible = "atmel,at91sam9rl-udc"; + compatible = "atmel,sama5d3-udc"; reg = <0x00500000 0x100000 0xf8030000 0x4000>; interrupts = <33 IRQ_TYPE_LEVEL_HIGH 2>; diff --git a/arch/arm/boot/dts/sama5d4.dtsi b/arch/arm/boot/dts/sama5d4.dtsi index 653a1f8..3ee22ee 100644 --- a/arch/arm/boot/dts/sama5d4.dtsi +++ b/arch/arm/boot/dts/sama5d4.dtsi @@ -127,7 +127,7 @@ usb0: gadget@00400000 { #address-cells = <1>; #size-cells = <0>; - compatible = "atmel,at91sam9rl-udc"; + compatible = "atmel,sama5d3-udc"; reg = <0x00400000 0x100000 0xfc02c000 0x4000>; interrupts = <47 IRQ_TYPE_LEVEL_HIGH 2>; -- cgit v0.10.2 From d80d942bcc8e1555a76774d20be9800cfef2d415 Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Sat, 27 Jun 2015 09:25:43 -0700 Subject: ARM: BCM: Do not select CONFIG_MTD_NAND_BRCMNAND This reverts 7dc95b40f599293aedf30432749ad25b51549041 ("ARM: BCM: Enable NAND support for iProc SoCs") since it creates an unmet dependency for MTD_NAND_BRCMNAND which depends on MTD and MTD_NAND, this results in the following build failure for brcmnand: LD init/built-in.o drivers/built-in.o: In function `brcmnand_remove': /home/fainelli/dev/linux/drivers/mtd/nand/brcmnand/brcmnand.c:2234: undefined reference to `nand_release' drivers/built-in.o: In function `brcmnand_init_cs': /home/fainelli/dev/linux/drivers/mtd/nand/brcmnand/brcmnand.c:1933: undefined reference to `nand_scan_ident' /home/fainelli/dev/linux/drivers/mtd/nand/brcmnand/brcmnand.c:1958: undefined reference to `nand_scan_tail' Makefile:931: recipe for target 'vmlinux' failed make: *** [vmlinux] Error 1 Instead, select this driver an all dependencies on the multi_v7_defconfig. Signed-off-by: Florian Fainelli Signed-off-by: Kevin Hilman diff --git a/arch/arm/mach-bcm/Kconfig b/arch/arm/mach-bcm/Kconfig index e9184fe..0ac9e4b3 100644 --- a/arch/arm/mach-bcm/Kconfig +++ b/arch/arm/mach-bcm/Kconfig @@ -19,7 +19,6 @@ config ARCH_BCM_IPROC select ARCH_REQUIRE_GPIOLIB select ARM_AMBA select PINCTRL - select MTD_NAND_BRCMNAND help This enables support for systems based on Broadcom IPROC architected SoCs. The IPROC complex contains one or more ARM CPUs along with common -- cgit v0.10.2 From ae41a0b7ed7740009b9ec87c7dc05b23f01d361a Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Sat, 27 Jun 2015 09:25:44 -0700 Subject: ARM: multi_v7_defconfig: Enable BRCMNAND driver The Broadcom NAND driver is used by brcmstb, bcm63xx, bcm5301x and Cygnus/iProc under mach-bcm, this is enough critical mass to enable it. Signed-off-by: Florian Fainelli Signed-off-by: Kevin Hilman diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig index fd6a6d2..6d83a1b 100644 --- a/arch/arm/configs/multi_v7_defconfig +++ b/arch/arm/configs/multi_v7_defconfig @@ -169,6 +169,7 @@ CONFIG_MTD_BLOCK=y CONFIG_MTD_M25P80=y CONFIG_MTD_NAND=y CONFIG_MTD_NAND_ATMEL=y +CONFIG_MTD_NAND_BRCMNAND=y CONFIG_MTD_NAND_DAVINCI=y CONFIG_MTD_SPI_NOR=y CONFIG_MTD_UBI=y -- cgit v0.10.2