From ebea7c0545d4d5e554b84c3ee8072f13c3fdd2ba Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Wed, 13 Jan 2016 21:51:29 +0100 Subject: spi: fix counting in spi-loopback-test code These variables are always used uninitialized: drivers/spi/spi-loopback-test.c: In function 'spi_test_run_iter': drivers/spi/spi-loopback-test.c:768:17: warning: 'rx_count' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/spi/spi-loopback-test.c:762:17: warning: 'tx_count' may be used uninitialized in this function [-Wmaybe-uninitialized] Adding an explicit initialization seems to be the only workable solution here, to make the code behave correctly and build without warning. Fixes: 84e0c4e5e2c4 ("spi: add loopback test driver to allow for spi_master regression tests") Signed-off-by: Arnd Bergmann Acked-by: Geert Uytterhoeven Signed-off-by: Mark Brown diff --git a/drivers/spi/spi-loopback-test.c b/drivers/spi/spi-loopback-test.c index 894616f..cf4bb36 100644 --- a/drivers/spi/spi-loopback-test.c +++ b/drivers/spi/spi-loopback-test.c @@ -761,6 +761,7 @@ static int spi_test_run_iter(struct spi_device *spi, test.iterate_transfer_mask = 1; /* count number of transfers with tx/rx_buf != NULL */ + rx_count = tx_count = 0; for (i = 0; i < test.transfer_count; i++) { if (test.transfers[i].tx_buf) tx_count++; -- cgit v0.10.2 From f8efca2f1783050368c71e978ee32d3aa692637b Mon Sep 17 00:00:00 2001 From: Gao Pan Date: Mon, 18 Jan 2016 15:44:01 +0800 Subject: spi: imx: fix spi resource leak with dma transfer In spi_imx_dma_transfer(), when desc_rx = dmaengine_prep_slave_sg() fails, the context goes to label no_dma and then return. However, the memory allocated for desc_tx has not been freed yet, which leads to resource leak. Signed-off-by: Gao Pan Reviewed-by: Fugang Duan Signed-off-by: Mark Brown diff --git a/drivers/spi/spi-imx.c b/drivers/spi/spi-imx.c index d98c33c..6a4ff27 100644 --- a/drivers/spi/spi-imx.c +++ b/drivers/spi/spi-imx.c @@ -929,7 +929,7 @@ static int spi_imx_dma_transfer(struct spi_imx_data *spi_imx, tx->sgl, tx->nents, DMA_MEM_TO_DEV, DMA_PREP_INTERRUPT | DMA_CTRL_ACK); if (!desc_tx) - goto no_dma; + goto tx_nodma; desc_tx->callback = spi_imx_dma_tx_callback; desc_tx->callback_param = (void *)spi_imx; @@ -941,7 +941,7 @@ static int spi_imx_dma_transfer(struct spi_imx_data *spi_imx, rx->sgl, rx->nents, DMA_DEV_TO_MEM, DMA_PREP_INTERRUPT | DMA_CTRL_ACK); if (!desc_rx) - goto no_dma; + goto rx_nodma; desc_rx->callback = spi_imx_dma_rx_callback; desc_rx->callback_param = (void *)spi_imx; @@ -1008,7 +1008,9 @@ static int spi_imx_dma_transfer(struct spi_imx_data *spi_imx, return ret; -no_dma: +rx_nodma: + dmaengine_terminate_all(master->dma_tx); +tx_nodma: pr_warn_once("%s %s: DMA not available, falling back to PIO\n", dev_driver_string(&master->dev), dev_name(&master->dev)); -- cgit v0.10.2 From 5cfa1e4e0deced0cccedb4b30facb8a8e68e209b Mon Sep 17 00:00:00 2001 From: Hou Zhiqiang Date: Fri, 22 Jan 2016 18:58:26 +0800 Subject: spi/fsl-espi: Correct the maximum transaction length The maximum length during one transcation is 64KiB. Signed-off-by: Hou Zhiqiang Signed-off-by: Mark Brown diff --git a/drivers/spi/spi-fsl-espi.c b/drivers/spi/spi-fsl-espi.c index 7fd6a4c..7cb0c19 100644 --- a/drivers/spi/spi-fsl-espi.c +++ b/drivers/spi/spi-fsl-espi.c @@ -84,7 +84,7 @@ struct fsl_espi_transfer { /* SPCOM register values */ #define SPCOM_CS(x) ((x) << 30) #define SPCOM_TRANLEN(x) ((x) << 0) -#define SPCOM_TRANLEN_MAX 0xFFFF /* Max transaction length */ +#define SPCOM_TRANLEN_MAX 0x10000 /* Max transaction length */ #define AUTOSUSPEND_TIMEOUT 2000 @@ -233,7 +233,7 @@ static int fsl_espi_bufs(struct spi_device *spi, struct spi_transfer *t) reinit_completion(&mpc8xxx_spi->done); /* Set SPCOM[CS] and SPCOM[TRANLEN] field */ - if ((t->len - 1) > SPCOM_TRANLEN_MAX) { + if (t->len > SPCOM_TRANLEN_MAX) { dev_err(mpc8xxx_spi->dev, "Transaction length (%d)" " beyond the SPCOM[TRANLEN] field\n", t->len); return -EINVAL; -- cgit v0.10.2 From 70f340df24518d36eeaefb6652d492f250115c19 Mon Sep 17 00:00:00 2001 From: Cyrille Pitchen Date: Wed, 27 Jan 2016 17:48:32 +0100 Subject: spi: atmel: fix gpio chip-select in case of non-DT platform The non-DT platform that uses this driver (actually the AVR32) was taking a bad branch for determining if the IP would use gpio for CS. Adding the presence of DT as a condition fixes this issue. Fixes: 4820303480a1 ("spi: atmel: add support for the internal chip-select of the spi controller") Reported-by: Mans Rullgard Signed-off-by: Cyrille Pitchen [nicolas.ferre@atmel.com: extract from ml discussion] Signed-off-by: Nicolas Ferre Tested-by: Mans Rullgard Signed-off-by: Mark Brown Cc: stable@vger.kernel.org diff --git a/drivers/spi/spi-atmel.c b/drivers/spi/spi-atmel.c index aebad36..8feac59 100644 --- a/drivers/spi/spi-atmel.c +++ b/drivers/spi/spi-atmel.c @@ -1571,6 +1571,7 @@ static int atmel_spi_probe(struct platform_device *pdev) as->use_cs_gpios = true; if (atmel_spi_is_v2(as) && + pdev->dev.of_node && !of_get_property(pdev->dev.of_node, "cs-gpios", NULL)) { as->use_cs_gpios = false; master->num_chipselect = 4; -- cgit v0.10.2 From fe0e2304f560f81c1673711ac3f9a8c7c3cbb8be Mon Sep 17 00:00:00 2001 From: Stephan Olbrich Date: Tue, 9 Feb 2016 19:10:32 +0100 Subject: spi: bcm2835aux: fix bitmask defines The bitmasks for txempty and idle interrupts were interchanged. Signed-off-by: Stephan Olbrich Reviewed-by: Eric Anholt Signed-off-by: Mark Brown diff --git a/drivers/spi/spi-bcm2835aux.c b/drivers/spi/spi-bcm2835aux.c index 7de6f84..ecc73c0 100644 --- a/drivers/spi/spi-bcm2835aux.c +++ b/drivers/spi/spi-bcm2835aux.c @@ -73,8 +73,8 @@ /* Bitfields in CNTL1 */ #define BCM2835_AUX_SPI_CNTL1_CSHIGH 0x00000700 -#define BCM2835_AUX_SPI_CNTL1_IDLE 0x00000080 -#define BCM2835_AUX_SPI_CNTL1_TXEMPTY 0x00000040 +#define BCM2835_AUX_SPI_CNTL1_TXEMPTY 0x00000080 +#define BCM2835_AUX_SPI_CNTL1_IDLE 0x00000040 #define BCM2835_AUX_SPI_CNTL1_MSBF_IN 0x00000002 #define BCM2835_AUX_SPI_CNTL1_KEEP_IN 0x00000001 -- cgit v0.10.2 From 0e6f357a5deba4b81b1a65acabaa51f2cbd2e2cd Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Wed, 10 Feb 2016 15:02:46 -0800 Subject: spi: omap2-mcspi: Fix PM regression with deferred probe for pm_runtime_reinit Commit 5de85b9d57ab ("PM / runtime: Re-init runtime PM states at probe error and driver unbind") introduced pm_runtime_reinit() that is used to reinitialize PM runtime after -EPROBE_DEFER. This allows shutting down the device after a failed probe. However, for drivers using pm_runtime_use_autosuspend() this can cause a state where suspend callback is never called after -EPROBE_DEFER. On the following device driver probe, hardware state is different from the PM runtime state causing omap_device to produce the following error: omap_device_enable() called from invalid state 1 And with omap_device and omap hardware being picky for PM, this will block any deeper idle states in hardware. The solution is to fix the drivers to follow the PM runtime documentation: 1. For sections of code that needs the device disabled, use pm_runtime_put_sync_suspend() if pm_runtime_set_autosuspend() has been set. 2. For driver exit code, use pm_runtime_dont_use_autosuspend() before pm_runtime_put_sync() if pm_runtime_use_autosuspend() has been set. Fixes: 5de85b9d57ab ("PM / runtime: Re-init runtime PM states at probe error and driver unbind") Cc: linux-spi@vger.kernel.org Cc: Alan Stern Cc: Kevin Hilman Cc: Mark Brown Cc: Nishanth Menon Cc: Rafael J. Wysocki Cc: Ulf Hansson Cc: Tero Kristo Signed-off-by: Tony Lindgren Signed-off-by: Mark Brown diff --git a/drivers/spi/spi-omap2-mcspi.c b/drivers/spi/spi-omap2-mcspi.c index 7273820..0caa3c8 100644 --- a/drivers/spi/spi-omap2-mcspi.c +++ b/drivers/spi/spi-omap2-mcspi.c @@ -1490,6 +1490,8 @@ static int omap2_mcspi_probe(struct platform_device *pdev) return status; disable_pm: + pm_runtime_dont_use_autosuspend(&pdev->dev); + pm_runtime_put_sync(&pdev->dev); pm_runtime_disable(&pdev->dev); free_master: spi_master_put(master); @@ -1501,6 +1503,7 @@ static int omap2_mcspi_remove(struct platform_device *pdev) struct spi_master *master = platform_get_drvdata(pdev); struct omap2_mcspi *mcspi = spi_master_get_devdata(master); + pm_runtime_dont_use_autosuspend(mcspi->dev); pm_runtime_put_sync(mcspi->dev); pm_runtime_disable(&pdev->dev); -- cgit v0.10.2