From a0067db36a2f9733a2e956a44ef8145e6a809bdb Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Wed, 18 Nov 2015 15:21:32 +0100 Subject: spi: s3c64xx: pass DMA arguments in platform data The s3c64xx platform data already contains a pointer to the DMA filter function, but not to the associated data. This simplifies the code and makes it more generic by passing the data along with the filter function like we do for other drivers. Signed-off-by: Arnd Bergmann Signed-off-by: Mark Brown diff --git a/arch/arm/plat-samsung/devs.c b/arch/arm/plat-samsung/devs.c index 8207462..4c64ece 100644 --- a/arch/arm/plat-samsung/devs.c +++ b/arch/arm/plat-samsung/devs.c @@ -1100,9 +1100,7 @@ struct platform_device s3c_device_wdt = { #ifdef CONFIG_S3C64XX_DEV_SPI0 static struct resource s3c64xx_spi0_resource[] = { [0] = DEFINE_RES_MEM(S3C_PA_SPI0, SZ_256), - [1] = DEFINE_RES_DMA(DMACH_SPI0_TX), - [2] = DEFINE_RES_DMA(DMACH_SPI0_RX), - [3] = DEFINE_RES_IRQ(IRQ_SPI0), + [1] = DEFINE_RES_IRQ(IRQ_SPI0), }; struct platform_device s3c64xx_device_spi0 = { @@ -1130,6 +1128,8 @@ void __init s3c64xx_spi0_set_platdata(int (*cfg_gpio)(void), int src_clk_nr, pd.num_cs = num_cs; pd.src_clk_nr = src_clk_nr; pd.cfg_gpio = (cfg_gpio) ? cfg_gpio : s3c64xx_spi0_cfg_gpio; + pd.dma_tx = (void *)DMACH_SPI0_TX; + pd.dma_rx = (void *)DMACH_SPI0_RX; #if defined(CONFIG_PL330_DMA) pd.filter = pl330_filter; #elif defined(CONFIG_S3C64XX_PL080) @@ -1145,9 +1145,7 @@ void __init s3c64xx_spi0_set_platdata(int (*cfg_gpio)(void), int src_clk_nr, #ifdef CONFIG_S3C64XX_DEV_SPI1 static struct resource s3c64xx_spi1_resource[] = { [0] = DEFINE_RES_MEM(S3C_PA_SPI1, SZ_256), - [1] = DEFINE_RES_DMA(DMACH_SPI1_TX), - [2] = DEFINE_RES_DMA(DMACH_SPI1_RX), - [3] = DEFINE_RES_IRQ(IRQ_SPI1), + [1] = DEFINE_RES_IRQ(IRQ_SPI1), }; struct platform_device s3c64xx_device_spi1 = { @@ -1175,12 +1173,15 @@ void __init s3c64xx_spi1_set_platdata(int (*cfg_gpio)(void), int src_clk_nr, pd.num_cs = num_cs; pd.src_clk_nr = src_clk_nr; pd.cfg_gpio = (cfg_gpio) ? cfg_gpio : s3c64xx_spi1_cfg_gpio; + pd.dma_tx = (void *)DMACH_SPI1_TX; + pd.dma_rx = (void *)DMACH_SPI1_RX; #if defined(CONFIG_PL330_DMA) pd.filter = pl330_filter; #elif defined(CONFIG_S3C64XX_PL080) pd.filter = pl08x_filter_id; #endif + s3c_set_platdata(&pd, sizeof(pd), &s3c64xx_device_spi1); } #endif /* CONFIG_S3C64XX_DEV_SPI1 */ @@ -1188,9 +1189,7 @@ void __init s3c64xx_spi1_set_platdata(int (*cfg_gpio)(void), int src_clk_nr, #ifdef CONFIG_S3C64XX_DEV_SPI2 static struct resource s3c64xx_spi2_resource[] = { [0] = DEFINE_RES_MEM(S3C_PA_SPI2, SZ_256), - [1] = DEFINE_RES_DMA(DMACH_SPI2_TX), - [2] = DEFINE_RES_DMA(DMACH_SPI2_RX), - [3] = DEFINE_RES_IRQ(IRQ_SPI2), + [1] = DEFINE_RES_IRQ(IRQ_SPI2), }; struct platform_device s3c64xx_device_spi2 = { @@ -1218,6 +1217,8 @@ void __init s3c64xx_spi2_set_platdata(int (*cfg_gpio)(void), int src_clk_nr, pd.num_cs = num_cs; pd.src_clk_nr = src_clk_nr; pd.cfg_gpio = (cfg_gpio) ? cfg_gpio : s3c64xx_spi2_cfg_gpio; + pd.dma_tx = (void *)DMACH_SPI2_TX; + pd.dma_rx = (void *)DMACH_SPI2_RX; #if defined(CONFIG_PL330_DMA) pd.filter = pl330_filter; #elif defined(CONFIG_S3C64XX_PL080) diff --git a/drivers/spi/spi-s3c64xx.c b/drivers/spi/spi-s3c64xx.c index 8e86e7f..b954c54 100644 --- a/drivers/spi/spi-s3c64xx.c +++ b/drivers/spi/spi-s3c64xx.c @@ -133,7 +133,6 @@ struct s3c64xx_spi_dma_data { struct dma_chan *ch; enum dma_transfer_direction direction; - unsigned int dmach; }; /** @@ -325,7 +324,7 @@ static int s3c64xx_spi_prepare_transfer(struct spi_master *spi) /* Acquire DMA channels */ sdd->rx_dma.ch = dma_request_slave_channel_compat(mask, filter, - (void *)(long)sdd->rx_dma.dmach, dev, "rx"); + sdd->cntrlr_info->dma_rx, dev, "rx"); if (!sdd->rx_dma.ch) { dev_err(dev, "Failed to get RX DMA channel\n"); ret = -EBUSY; @@ -334,7 +333,7 @@ static int s3c64xx_spi_prepare_transfer(struct spi_master *spi) spi->dma_rx = sdd->rx_dma.ch; sdd->tx_dma.ch = dma_request_slave_channel_compat(mask, filter, - (void *)(long)sdd->tx_dma.dmach, dev, "tx"); + sdd->cntrlr_info->dma_tx, dev, "tx"); if (!sdd->tx_dma.ch) { dev_err(dev, "Failed to get TX DMA channel\n"); ret = -EBUSY; @@ -1028,7 +1027,6 @@ static inline struct s3c64xx_spi_port_config *s3c64xx_spi_get_port_config( static int s3c64xx_spi_probe(struct platform_device *pdev) { struct resource *mem_res; - struct resource *res; struct s3c64xx_spi_driver_data *sdd; struct s3c64xx_spi_info *sci = dev_get_platdata(&pdev->dev); struct spi_master *master; @@ -1087,20 +1085,9 @@ static int s3c64xx_spi_probe(struct platform_device *pdev) sdd->cur_bpw = 8; - if (!sdd->pdev->dev.of_node) { - res = platform_get_resource(pdev, IORESOURCE_DMA, 0); - if (!res) { - dev_warn(&pdev->dev, "Unable to get SPI tx dma resource. Switching to poll mode\n"); - sdd->port_conf->quirks = S3C64XX_SPI_QUIRK_POLL; - } else - sdd->tx_dma.dmach = res->start; - - res = platform_get_resource(pdev, IORESOURCE_DMA, 1); - if (!res) { - dev_warn(&pdev->dev, "Unable to get SPI rx dma resource. Switching to poll mode\n"); - sdd->port_conf->quirks = S3C64XX_SPI_QUIRK_POLL; - } else - sdd->rx_dma.dmach = res->start; + if (!sdd->pdev->dev.of_node && (!sci->dma_tx || !sci->dma_rx)) { + dev_warn(&pdev->dev, "Unable to get SPI tx/rx DMA data. Switching to poll mode\n"); + sdd->port_conf->quirks = S3C64XX_SPI_QUIRK_POLL; } sdd->tx_dma.direction = DMA_MEM_TO_DEV; @@ -1197,9 +1184,9 @@ static int s3c64xx_spi_probe(struct platform_device *pdev) dev_dbg(&pdev->dev, "Samsung SoC SPI Driver loaded for Bus SPI-%d with %d Slaves attached\n", sdd->port_id, master->num_chipselect); - dev_dbg(&pdev->dev, "\tIOmem=[%pR]\tFIFO %dbytes\tDMA=[Rx-%d, Tx-%d]\n", + dev_dbg(&pdev->dev, "\tIOmem=[%pR]\tFIFO %dbytes\tDMA=[Rx-%p, Tx-%p]\n", mem_res, (FIFO_LVL_MASK(sdd) >> 1) + 1, - sdd->rx_dma.dmach, sdd->tx_dma.dmach); + sci->dma_rx, sci->dma_tx); pm_runtime_mark_last_busy(&pdev->dev); pm_runtime_put_autosuspend(&pdev->dev); diff --git a/include/linux/platform_data/spi-s3c64xx.h b/include/linux/platform_data/spi-s3c64xx.h index d3889b9..fb5625b 100644 --- a/include/linux/platform_data/spi-s3c64xx.h +++ b/include/linux/platform_data/spi-s3c64xx.h @@ -40,6 +40,8 @@ struct s3c64xx_spi_info { int num_cs; int (*cfg_gpio)(void); dma_filter_fn filter; + void *dma_tx; + void *dma_rx; }; /** -- cgit v0.10.2 From d599af65fda384b5e91780485f243c9f2d3e757d Mon Sep 17 00:00:00 2001 From: Mika Westerberg Date: Fri, 20 Nov 2015 13:55:21 +0200 Subject: spi: pxa2xx: Remove redundant call to lpss_ssp_setup() in probe Commit 8b136baa5892 ("spi: pxa2xx: Detect number of enabled Intel LPSS SPI chip select signals") added a block where lpss_ssp_setup() gets called again for Intel LPSS SPI host controllers before checking number of chip selects from the capabilities register. There is no point in calling the function twice in probe so remove the first call. Reported-by: Aaron Lu Signed-off-by: Mika Westerberg Acked-by: Jarkko Nikula Signed-off-by: Mark Brown diff --git a/drivers/spi/spi-pxa2xx.c b/drivers/spi/spi-pxa2xx.c index b25dc71..ab9914a 100644 --- a/drivers/spi/spi-pxa2xx.c +++ b/drivers/spi/spi-pxa2xx.c @@ -1567,9 +1567,6 @@ static int pxa2xx_spi_probe(struct platform_device *pdev) if (!is_quark_x1000_ssp(drv_data)) pxa2xx_spi_write(drv_data, SSPSP, 0); - if (is_lpss_ssp(drv_data)) - lpss_ssp_setup(drv_data); - if (is_lpss_ssp(drv_data)) { lpss_ssp_setup(drv_data); config = lpss_get_config(drv_data); -- cgit v0.10.2 From 5eca4d843f9f0c3140a8657ba2f8217ee6c08c11 Mon Sep 17 00:00:00 2001 From: Joshua Clayton Date: Wed, 18 Nov 2015 14:30:37 -0800 Subject: spi: Move spi code from Documentation to tools Jon Corbet requested this code moved with the last changeset, https://lkml.org/lkml/2015/3/1/144, but the patch was not applied because it missed the Makefile. Moved spidev_test, spidev_fdx and their Makefile infrastructure. Signed-off-by: Joshua Clayton Signed-off-by: Mark Brown diff --git a/Documentation/Makefile b/Documentation/Makefile index bc05482..1207d79 100644 --- a/Documentation/Makefile +++ b/Documentation/Makefile @@ -1,4 +1,4 @@ subdir-y := accounting auxdisplay blackfin connector \ filesystems filesystems ia64 laptops mic misc-devices \ - networking pcmcia prctl ptp spi timers vDSO video4linux \ + networking pcmcia prctl ptp timers vDSO video4linux \ watchdog diff --git a/Documentation/spi/Makefile b/Documentation/spi/Makefile deleted file mode 100644 index efa2558..0000000 --- a/Documentation/spi/Makefile +++ /dev/null @@ -1,8 +0,0 @@ -# List of programs to build -hostprogs-y := spidev_test spidev_fdx - -# Tell kbuild to always build the programs -always := $(hostprogs-y) - -HOSTCFLAGS_spidev_test.o += -I$(objtree)/usr/include -HOSTCFLAGS_spidev_fdx.o += -I$(objtree)/usr/include diff --git a/Documentation/spi/spidev_fdx.c b/Documentation/spi/spidev_fdx.c deleted file mode 100644 index 0ea3e51..0000000 --- a/Documentation/spi/spidev_fdx.c +++ /dev/null @@ -1,158 +0,0 @@ -#include -#include -#include -#include -#include - -#include -#include -#include - -#include -#include - - -static int verbose; - -static void do_read(int fd, int len) -{ - unsigned char buf[32], *bp; - int status; - - /* read at least 2 bytes, no more than 32 */ - if (len < 2) - len = 2; - else if (len > sizeof(buf)) - len = sizeof(buf); - memset(buf, 0, sizeof buf); - - status = read(fd, buf, len); - if (status < 0) { - perror("read"); - return; - } - if (status != len) { - fprintf(stderr, "short read\n"); - return; - } - - printf("read(%2d, %2d): %02x %02x,", len, status, - buf[0], buf[1]); - status -= 2; - bp = buf + 2; - while (status-- > 0) - printf(" %02x", *bp++); - printf("\n"); -} - -static void do_msg(int fd, int len) -{ - struct spi_ioc_transfer xfer[2]; - unsigned char buf[32], *bp; - int status; - - memset(xfer, 0, sizeof xfer); - memset(buf, 0, sizeof buf); - - if (len > sizeof buf) - len = sizeof buf; - - buf[0] = 0xaa; - xfer[0].tx_buf = (unsigned long)buf; - xfer[0].len = 1; - - xfer[1].rx_buf = (unsigned long) buf; - xfer[1].len = len; - - status = ioctl(fd, SPI_IOC_MESSAGE(2), xfer); - if (status < 0) { - perror("SPI_IOC_MESSAGE"); - return; - } - - printf("response(%2d, %2d): ", len, status); - for (bp = buf; len; len--) - printf(" %02x", *bp++); - printf("\n"); -} - -static void dumpstat(const char *name, int fd) -{ - __u8 lsb, bits; - __u32 mode, speed; - - if (ioctl(fd, SPI_IOC_RD_MODE32, &mode) < 0) { - perror("SPI rd_mode"); - return; - } - if (ioctl(fd, SPI_IOC_RD_LSB_FIRST, &lsb) < 0) { - perror("SPI rd_lsb_fist"); - return; - } - if (ioctl(fd, SPI_IOC_RD_BITS_PER_WORD, &bits) < 0) { - perror("SPI bits_per_word"); - return; - } - if (ioctl(fd, SPI_IOC_RD_MAX_SPEED_HZ, &speed) < 0) { - perror("SPI max_speed_hz"); - return; - } - - printf("%s: spi mode 0x%x, %d bits %sper word, %d Hz max\n", - name, mode, bits, lsb ? "(lsb first) " : "", speed); -} - -int main(int argc, char **argv) -{ - int c; - int readcount = 0; - int msglen = 0; - int fd; - const char *name; - - while ((c = getopt(argc, argv, "hm:r:v")) != EOF) { - switch (c) { - case 'm': - msglen = atoi(optarg); - if (msglen < 0) - goto usage; - continue; - case 'r': - readcount = atoi(optarg); - if (readcount < 0) - goto usage; - continue; - case 'v': - verbose++; - continue; - case 'h': - case '?': -usage: - fprintf(stderr, - "usage: %s [-h] [-m N] [-r N] /dev/spidevB.D\n", - argv[0]); - return 1; - } - } - - if ((optind + 1) != argc) - goto usage; - name = argv[optind]; - - fd = open(name, O_RDWR); - if (fd < 0) { - perror("open"); - return 1; - } - - dumpstat(name, fd); - - if (msglen) - do_msg(fd, msglen); - - if (readcount) - do_read(fd, readcount); - - close(fd); - return 0; -} diff --git a/Documentation/spi/spidev_test.c b/Documentation/spi/spidev_test.c deleted file mode 100644 index 135b3f5..0000000 --- a/Documentation/spi/spidev_test.c +++ /dev/null @@ -1,318 +0,0 @@ -/* - * SPI testing utility (using spidev driver) - * - * Copyright (c) 2007 MontaVista Software, Inc. - * Copyright (c) 2007 Anton Vorontsov - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License. - * - * Cross-compile with cross-gcc -I/path/to/cross-kernel/include - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#define ARRAY_SIZE(a) (sizeof(a) / sizeof((a)[0])) - -static void pabort(const char *s) -{ - perror(s); - abort(); -} - -static const char *device = "/dev/spidev1.1"; -static uint32_t mode; -static uint8_t bits = 8; -static uint32_t speed = 500000; -static uint16_t delay; -static int verbose; - -uint8_t default_tx[] = { - 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, - 0x40, 0x00, 0x00, 0x00, 0x00, 0x95, - 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, - 0xF0, 0x0D, -}; - -uint8_t default_rx[ARRAY_SIZE(default_tx)] = {0, }; -char *input_tx; - -static void hex_dump(const void *src, size_t length, size_t line_size, char *prefix) -{ - int i = 0; - const unsigned char *address = src; - const unsigned char *line = address; - unsigned char c; - - printf("%s | ", prefix); - while (length-- > 0) { - printf("%02X ", *address++); - if (!(++i % line_size) || (length == 0 && i % line_size)) { - if (length == 0) { - while (i++ % line_size) - printf("__ "); - } - printf(" | "); /* right close */ - while (line < address) { - c = *line++; - printf("%c", (c < 33 || c == 255) ? 0x2E : c); - } - printf("\n"); - if (length > 0) - printf("%s | ", prefix); - } - } -} - -/* - * Unescape - process hexadecimal escape character - * converts shell input "\x23" -> 0x23 - */ -static int unescape(char *_dst, char *_src, size_t len) -{ - int ret = 0; - char *src = _src; - char *dst = _dst; - unsigned int ch; - - while (*src) { - if (*src == '\\' && *(src+1) == 'x') { - sscanf(src + 2, "%2x", &ch); - src += 4; - *dst++ = (unsigned char)ch; - } else { - *dst++ = *src++; - } - ret++; - } - return ret; -} - -static void transfer(int fd, uint8_t const *tx, uint8_t const *rx, size_t len) -{ - int ret; - - struct spi_ioc_transfer tr = { - .tx_buf = (unsigned long)tx, - .rx_buf = (unsigned long)rx, - .len = len, - .delay_usecs = delay, - .speed_hz = speed, - .bits_per_word = bits, - }; - - if (mode & SPI_TX_QUAD) - tr.tx_nbits = 4; - else if (mode & SPI_TX_DUAL) - tr.tx_nbits = 2; - if (mode & SPI_RX_QUAD) - tr.rx_nbits = 4; - else if (mode & SPI_RX_DUAL) - tr.rx_nbits = 2; - if (!(mode & SPI_LOOP)) { - if (mode & (SPI_TX_QUAD | SPI_TX_DUAL)) - tr.rx_buf = 0; - else if (mode & (SPI_RX_QUAD | SPI_RX_DUAL)) - tr.tx_buf = 0; - } - - ret = ioctl(fd, SPI_IOC_MESSAGE(1), &tr); - if (ret < 1) - pabort("can't send spi message"); - - if (verbose) - hex_dump(tx, len, 32, "TX"); - hex_dump(rx, len, 32, "RX"); -} - -static void print_usage(const char *prog) -{ - printf("Usage: %s [-DsbdlHOLC3]\n", prog); - puts(" -D --device device to use (default /dev/spidev1.1)\n" - " -s --speed max speed (Hz)\n" - " -d --delay delay (usec)\n" - " -b --bpw bits per word \n" - " -l --loop loopback\n" - " -H --cpha clock phase\n" - " -O --cpol clock polarity\n" - " -L --lsb least significant bit first\n" - " -C --cs-high chip select active high\n" - " -3 --3wire SI/SO signals shared\n" - " -v --verbose Verbose (show tx buffer)\n" - " -p Send data (e.g. \"1234\\xde\\xad\")\n" - " -N --no-cs no chip select\n" - " -R --ready slave pulls low to pause\n" - " -2 --dual dual transfer\n" - " -4 --quad quad transfer\n"); - exit(1); -} - -static void parse_opts(int argc, char *argv[]) -{ - while (1) { - static const struct option lopts[] = { - { "device", 1, 0, 'D' }, - { "speed", 1, 0, 's' }, - { "delay", 1, 0, 'd' }, - { "bpw", 1, 0, 'b' }, - { "loop", 0, 0, 'l' }, - { "cpha", 0, 0, 'H' }, - { "cpol", 0, 0, 'O' }, - { "lsb", 0, 0, 'L' }, - { "cs-high", 0, 0, 'C' }, - { "3wire", 0, 0, '3' }, - { "no-cs", 0, 0, 'N' }, - { "ready", 0, 0, 'R' }, - { "dual", 0, 0, '2' }, - { "verbose", 0, 0, 'v' }, - { "quad", 0, 0, '4' }, - { NULL, 0, 0, 0 }, - }; - int c; - - c = getopt_long(argc, argv, "D:s:d:b:lHOLC3NR24p:v", lopts, NULL); - - if (c == -1) - break; - - switch (c) { - case 'D': - device = optarg; - break; - case 's': - speed = atoi(optarg); - break; - case 'd': - delay = atoi(optarg); - break; - case 'b': - bits = atoi(optarg); - break; - case 'l': - mode |= SPI_LOOP; - break; - case 'H': - mode |= SPI_CPHA; - break; - case 'O': - mode |= SPI_CPOL; - break; - case 'L': - mode |= SPI_LSB_FIRST; - break; - case 'C': - mode |= SPI_CS_HIGH; - break; - case '3': - mode |= SPI_3WIRE; - break; - case 'N': - mode |= SPI_NO_CS; - break; - case 'v': - verbose = 1; - break; - case 'R': - mode |= SPI_READY; - break; - case 'p': - input_tx = optarg; - break; - case '2': - mode |= SPI_TX_DUAL; - break; - case '4': - mode |= SPI_TX_QUAD; - break; - default: - print_usage(argv[0]); - break; - } - } - if (mode & SPI_LOOP) { - if (mode & SPI_TX_DUAL) - mode |= SPI_RX_DUAL; - if (mode & SPI_TX_QUAD) - mode |= SPI_RX_QUAD; - } -} - -int main(int argc, char *argv[]) -{ - int ret = 0; - int fd; - uint8_t *tx; - uint8_t *rx; - int size; - - parse_opts(argc, argv); - - fd = open(device, O_RDWR); - if (fd < 0) - pabort("can't open device"); - - /* - * spi mode - */ - ret = ioctl(fd, SPI_IOC_WR_MODE32, &mode); - if (ret == -1) - pabort("can't set spi mode"); - - ret = ioctl(fd, SPI_IOC_RD_MODE32, &mode); - if (ret == -1) - pabort("can't get spi mode"); - - /* - * bits per word - */ - ret = ioctl(fd, SPI_IOC_WR_BITS_PER_WORD, &bits); - if (ret == -1) - pabort("can't set bits per word"); - - ret = ioctl(fd, SPI_IOC_RD_BITS_PER_WORD, &bits); - if (ret == -1) - pabort("can't get bits per word"); - - /* - * max speed hz - */ - ret = ioctl(fd, SPI_IOC_WR_MAX_SPEED_HZ, &speed); - if (ret == -1) - pabort("can't set max speed hz"); - - ret = ioctl(fd, SPI_IOC_RD_MAX_SPEED_HZ, &speed); - if (ret == -1) - pabort("can't get max speed hz"); - - printf("spi mode: 0x%x\n", mode); - printf("bits per word: %d\n", bits); - printf("max speed: %d Hz (%d KHz)\n", speed, speed/1000); - - if (input_tx) { - size = strlen(input_tx+1); - tx = malloc(size); - rx = malloc(size); - size = unescape((char *)tx, input_tx, size); - transfer(fd, tx, rx, size); - free(rx); - free(tx); - } else { - transfer(fd, default_tx, default_rx, sizeof(default_tx)); - } - - close(fd); - - return ret; -} diff --git a/tools/Makefile b/tools/Makefile index d6f307d..0528aa1 100644 --- a/tools/Makefile +++ b/tools/Makefile @@ -17,6 +17,7 @@ help: @echo ' lguest - a minimal 32-bit x86 hypervisor' @echo ' perf - Linux performance measurement and analysis tool' @echo ' selftests - various kernel selftests' + @echo ' spi - spi tools' @echo ' turbostat - Intel CPU idle stats and freq reporting tool' @echo ' usb - USB testing tools' @echo ' virtio - vhost test module' @@ -48,7 +49,7 @@ acpi: FORCE cpupower: FORCE $(call descend,power/$@) -cgroup firewire hv guest usb virtio vm net iio: FORCE +cgroup firewire hv guest spi usb virtio vm net iio: FORCE $(call descend,$@) liblockdep: FORCE @@ -109,7 +110,7 @@ acpi_clean: cpupower_clean: $(call descend,power/cpupower,clean) -cgroup_clean hv_clean firewire_clean lguest_clean usb_clean virtio_clean vm_clean net_clean iio_clean: +cgroup_clean hv_clean firewire_clean lguest_clean spi_clean usb_clean virtio_clean vm_clean net_clean iio_clean: $(call descend,$(@:_clean=),clean) liblockdep_clean: @@ -134,7 +135,7 @@ freefall_clean: $(call descend,laptop/freefall,clean) clean: acpi_clean cgroup_clean cpupower_clean hv_clean firewire_clean lguest_clean \ - perf_clean selftests_clean turbostat_clean usb_clean virtio_clean \ + perf_clean selftests_clean turbostat_clean spi_clean usb_clean virtio_clean \ vm_clean net_clean iio_clean x86_energy_perf_policy_clean tmon_clean \ freefall_clean diff --git a/tools/spi/Makefile b/tools/spi/Makefile new file mode 100644 index 0000000..cd0db62 --- /dev/null +++ b/tools/spi/Makefile @@ -0,0 +1,4 @@ +all: spidev_test spidev_fdx + +clean: + $(RM) spidev_test spidev_fdx diff --git a/tools/spi/spidev_fdx.c b/tools/spi/spidev_fdx.c new file mode 100644 index 0000000..0ea3e51 --- /dev/null +++ b/tools/spi/spidev_fdx.c @@ -0,0 +1,158 @@ +#include +#include +#include +#include +#include + +#include +#include +#include + +#include +#include + + +static int verbose; + +static void do_read(int fd, int len) +{ + unsigned char buf[32], *bp; + int status; + + /* read at least 2 bytes, no more than 32 */ + if (len < 2) + len = 2; + else if (len > sizeof(buf)) + len = sizeof(buf); + memset(buf, 0, sizeof buf); + + status = read(fd, buf, len); + if (status < 0) { + perror("read"); + return; + } + if (status != len) { + fprintf(stderr, "short read\n"); + return; + } + + printf("read(%2d, %2d): %02x %02x,", len, status, + buf[0], buf[1]); + status -= 2; + bp = buf + 2; + while (status-- > 0) + printf(" %02x", *bp++); + printf("\n"); +} + +static void do_msg(int fd, int len) +{ + struct spi_ioc_transfer xfer[2]; + unsigned char buf[32], *bp; + int status; + + memset(xfer, 0, sizeof xfer); + memset(buf, 0, sizeof buf); + + if (len > sizeof buf) + len = sizeof buf; + + buf[0] = 0xaa; + xfer[0].tx_buf = (unsigned long)buf; + xfer[0].len = 1; + + xfer[1].rx_buf = (unsigned long) buf; + xfer[1].len = len; + + status = ioctl(fd, SPI_IOC_MESSAGE(2), xfer); + if (status < 0) { + perror("SPI_IOC_MESSAGE"); + return; + } + + printf("response(%2d, %2d): ", len, status); + for (bp = buf; len; len--) + printf(" %02x", *bp++); + printf("\n"); +} + +static void dumpstat(const char *name, int fd) +{ + __u8 lsb, bits; + __u32 mode, speed; + + if (ioctl(fd, SPI_IOC_RD_MODE32, &mode) < 0) { + perror("SPI rd_mode"); + return; + } + if (ioctl(fd, SPI_IOC_RD_LSB_FIRST, &lsb) < 0) { + perror("SPI rd_lsb_fist"); + return; + } + if (ioctl(fd, SPI_IOC_RD_BITS_PER_WORD, &bits) < 0) { + perror("SPI bits_per_word"); + return; + } + if (ioctl(fd, SPI_IOC_RD_MAX_SPEED_HZ, &speed) < 0) { + perror("SPI max_speed_hz"); + return; + } + + printf("%s: spi mode 0x%x, %d bits %sper word, %d Hz max\n", + name, mode, bits, lsb ? "(lsb first) " : "", speed); +} + +int main(int argc, char **argv) +{ + int c; + int readcount = 0; + int msglen = 0; + int fd; + const char *name; + + while ((c = getopt(argc, argv, "hm:r:v")) != EOF) { + switch (c) { + case 'm': + msglen = atoi(optarg); + if (msglen < 0) + goto usage; + continue; + case 'r': + readcount = atoi(optarg); + if (readcount < 0) + goto usage; + continue; + case 'v': + verbose++; + continue; + case 'h': + case '?': +usage: + fprintf(stderr, + "usage: %s [-h] [-m N] [-r N] /dev/spidevB.D\n", + argv[0]); + return 1; + } + } + + if ((optind + 1) != argc) + goto usage; + name = argv[optind]; + + fd = open(name, O_RDWR); + if (fd < 0) { + perror("open"); + return 1; + } + + dumpstat(name, fd); + + if (msglen) + do_msg(fd, msglen); + + if (readcount) + do_read(fd, readcount); + + close(fd); + return 0; +} diff --git a/tools/spi/spidev_test.c b/tools/spi/spidev_test.c new file mode 100644 index 0000000..135b3f5 --- /dev/null +++ b/tools/spi/spidev_test.c @@ -0,0 +1,318 @@ +/* + * SPI testing utility (using spidev driver) + * + * Copyright (c) 2007 MontaVista Software, Inc. + * Copyright (c) 2007 Anton Vorontsov + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License. + * + * Cross-compile with cross-gcc -I/path/to/cross-kernel/include + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define ARRAY_SIZE(a) (sizeof(a) / sizeof((a)[0])) + +static void pabort(const char *s) +{ + perror(s); + abort(); +} + +static const char *device = "/dev/spidev1.1"; +static uint32_t mode; +static uint8_t bits = 8; +static uint32_t speed = 500000; +static uint16_t delay; +static int verbose; + +uint8_t default_tx[] = { + 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, + 0x40, 0x00, 0x00, 0x00, 0x00, 0x95, + 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, + 0xF0, 0x0D, +}; + +uint8_t default_rx[ARRAY_SIZE(default_tx)] = {0, }; +char *input_tx; + +static void hex_dump(const void *src, size_t length, size_t line_size, char *prefix) +{ + int i = 0; + const unsigned char *address = src; + const unsigned char *line = address; + unsigned char c; + + printf("%s | ", prefix); + while (length-- > 0) { + printf("%02X ", *address++); + if (!(++i % line_size) || (length == 0 && i % line_size)) { + if (length == 0) { + while (i++ % line_size) + printf("__ "); + } + printf(" | "); /* right close */ + while (line < address) { + c = *line++; + printf("%c", (c < 33 || c == 255) ? 0x2E : c); + } + printf("\n"); + if (length > 0) + printf("%s | ", prefix); + } + } +} + +/* + * Unescape - process hexadecimal escape character + * converts shell input "\x23" -> 0x23 + */ +static int unescape(char *_dst, char *_src, size_t len) +{ + int ret = 0; + char *src = _src; + char *dst = _dst; + unsigned int ch; + + while (*src) { + if (*src == '\\' && *(src+1) == 'x') { + sscanf(src + 2, "%2x", &ch); + src += 4; + *dst++ = (unsigned char)ch; + } else { + *dst++ = *src++; + } + ret++; + } + return ret; +} + +static void transfer(int fd, uint8_t const *tx, uint8_t const *rx, size_t len) +{ + int ret; + + struct spi_ioc_transfer tr = { + .tx_buf = (unsigned long)tx, + .rx_buf = (unsigned long)rx, + .len = len, + .delay_usecs = delay, + .speed_hz = speed, + .bits_per_word = bits, + }; + + if (mode & SPI_TX_QUAD) + tr.tx_nbits = 4; + else if (mode & SPI_TX_DUAL) + tr.tx_nbits = 2; + if (mode & SPI_RX_QUAD) + tr.rx_nbits = 4; + else if (mode & SPI_RX_DUAL) + tr.rx_nbits = 2; + if (!(mode & SPI_LOOP)) { + if (mode & (SPI_TX_QUAD | SPI_TX_DUAL)) + tr.rx_buf = 0; + else if (mode & (SPI_RX_QUAD | SPI_RX_DUAL)) + tr.tx_buf = 0; + } + + ret = ioctl(fd, SPI_IOC_MESSAGE(1), &tr); + if (ret < 1) + pabort("can't send spi message"); + + if (verbose) + hex_dump(tx, len, 32, "TX"); + hex_dump(rx, len, 32, "RX"); +} + +static void print_usage(const char *prog) +{ + printf("Usage: %s [-DsbdlHOLC3]\n", prog); + puts(" -D --device device to use (default /dev/spidev1.1)\n" + " -s --speed max speed (Hz)\n" + " -d --delay delay (usec)\n" + " -b --bpw bits per word \n" + " -l --loop loopback\n" + " -H --cpha clock phase\n" + " -O --cpol clock polarity\n" + " -L --lsb least significant bit first\n" + " -C --cs-high chip select active high\n" + " -3 --3wire SI/SO signals shared\n" + " -v --verbose Verbose (show tx buffer)\n" + " -p Send data (e.g. \"1234\\xde\\xad\")\n" + " -N --no-cs no chip select\n" + " -R --ready slave pulls low to pause\n" + " -2 --dual dual transfer\n" + " -4 --quad quad transfer\n"); + exit(1); +} + +static void parse_opts(int argc, char *argv[]) +{ + while (1) { + static const struct option lopts[] = { + { "device", 1, 0, 'D' }, + { "speed", 1, 0, 's' }, + { "delay", 1, 0, 'd' }, + { "bpw", 1, 0, 'b' }, + { "loop", 0, 0, 'l' }, + { "cpha", 0, 0, 'H' }, + { "cpol", 0, 0, 'O' }, + { "lsb", 0, 0, 'L' }, + { "cs-high", 0, 0, 'C' }, + { "3wire", 0, 0, '3' }, + { "no-cs", 0, 0, 'N' }, + { "ready", 0, 0, 'R' }, + { "dual", 0, 0, '2' }, + { "verbose", 0, 0, 'v' }, + { "quad", 0, 0, '4' }, + { NULL, 0, 0, 0 }, + }; + int c; + + c = getopt_long(argc, argv, "D:s:d:b:lHOLC3NR24p:v", lopts, NULL); + + if (c == -1) + break; + + switch (c) { + case 'D': + device = optarg; + break; + case 's': + speed = atoi(optarg); + break; + case 'd': + delay = atoi(optarg); + break; + case 'b': + bits = atoi(optarg); + break; + case 'l': + mode |= SPI_LOOP; + break; + case 'H': + mode |= SPI_CPHA; + break; + case 'O': + mode |= SPI_CPOL; + break; + case 'L': + mode |= SPI_LSB_FIRST; + break; + case 'C': + mode |= SPI_CS_HIGH; + break; + case '3': + mode |= SPI_3WIRE; + break; + case 'N': + mode |= SPI_NO_CS; + break; + case 'v': + verbose = 1; + break; + case 'R': + mode |= SPI_READY; + break; + case 'p': + input_tx = optarg; + break; + case '2': + mode |= SPI_TX_DUAL; + break; + case '4': + mode |= SPI_TX_QUAD; + break; + default: + print_usage(argv[0]); + break; + } + } + if (mode & SPI_LOOP) { + if (mode & SPI_TX_DUAL) + mode |= SPI_RX_DUAL; + if (mode & SPI_TX_QUAD) + mode |= SPI_RX_QUAD; + } +} + +int main(int argc, char *argv[]) +{ + int ret = 0; + int fd; + uint8_t *tx; + uint8_t *rx; + int size; + + parse_opts(argc, argv); + + fd = open(device, O_RDWR); + if (fd < 0) + pabort("can't open device"); + + /* + * spi mode + */ + ret = ioctl(fd, SPI_IOC_WR_MODE32, &mode); + if (ret == -1) + pabort("can't set spi mode"); + + ret = ioctl(fd, SPI_IOC_RD_MODE32, &mode); + if (ret == -1) + pabort("can't get spi mode"); + + /* + * bits per word + */ + ret = ioctl(fd, SPI_IOC_WR_BITS_PER_WORD, &bits); + if (ret == -1) + pabort("can't set bits per word"); + + ret = ioctl(fd, SPI_IOC_RD_BITS_PER_WORD, &bits); + if (ret == -1) + pabort("can't get bits per word"); + + /* + * max speed hz + */ + ret = ioctl(fd, SPI_IOC_WR_MAX_SPEED_HZ, &speed); + if (ret == -1) + pabort("can't set max speed hz"); + + ret = ioctl(fd, SPI_IOC_RD_MAX_SPEED_HZ, &speed); + if (ret == -1) + pabort("can't get max speed hz"); + + printf("spi mode: 0x%x\n", mode); + printf("bits per word: %d\n", bits); + printf("max speed: %d Hz (%d KHz)\n", speed, speed/1000); + + if (input_tx) { + size = strlen(input_tx+1); + tx = malloc(size); + rx = malloc(size); + size = unescape((char *)tx, input_tx, size); + transfer(fd, tx, rx, size); + free(rx); + free(tx); + } else { + transfer(fd, default_tx, default_rx, sizeof(default_tx)); + } + + close(fd); + + return ret; +} -- cgit v0.10.2 From 5c437a401b824399b6fa7342c66b675ebb7af43e Mon Sep 17 00:00:00 2001 From: Joshua Clayton Date: Wed, 18 Nov 2015 14:30:38 -0800 Subject: spi: spidev_test: transfer_escaped_string function Move the input_tx code into its own small function. This cleans up some variables from main() that are used only here. While we are at it, check malloc calls instead of assuming they succeed. Signed-off-by: Joshua Clayton Signed-off-by: Mark Brown diff --git a/tools/spi/spidev_test.c b/tools/spi/spidev_test.c index 135b3f5..f9d2957 100644 --- a/tools/spi/spidev_test.c +++ b/tools/spi/spidev_test.c @@ -249,13 +249,30 @@ static void parse_opts(int argc, char *argv[]) } } +static void transfer_escaped_string(int fd, char *str) +{ + size_t size = strlen(str + 1); + uint8_t *tx; + uint8_t *rx; + + tx = malloc(size); + if (!tx) + pabort("can't allocate tx buffer"); + + rx = malloc(size); + if (!rx) + pabort("can't allocate rx buffer"); + + size = unescape((char *)tx, str, size); + transfer(fd, tx, rx, size); + free(rx); + free(tx); +} + int main(int argc, char *argv[]) { int ret = 0; int fd; - uint8_t *tx; - uint8_t *rx; - int size; parse_opts(argc, argv); @@ -300,17 +317,10 @@ int main(int argc, char *argv[]) printf("bits per word: %d\n", bits); printf("max speed: %d Hz (%d KHz)\n", speed, speed/1000); - if (input_tx) { - size = strlen(input_tx+1); - tx = malloc(size); - rx = malloc(size); - size = unescape((char *)tx, input_tx, size); - transfer(fd, tx, rx, size); - free(rx); - free(tx); - } else { + if (input_tx) + transfer_escaped_string(fd, input_tx); + else transfer(fd, default_tx, default_rx, sizeof(default_tx)); - } close(fd); -- cgit v0.10.2 From 7af475a5b55e8e47327818e8133fe22204c1fc4d Mon Sep 17 00:00:00 2001 From: Joshua Clayton Date: Wed, 18 Nov 2015 14:30:39 -0800 Subject: spi: spidev_test: accept input from a file Add input file support to facilitate testing larger data. Signed-off-by: Joshua Clayton Signed-off-by: Mark Brown diff --git a/tools/spi/spidev_test.c b/tools/spi/spidev_test.c index f9d2957..71a45a4 100644 --- a/tools/spi/spidev_test.c +++ b/tools/spi/spidev_test.c @@ -19,6 +19,7 @@ #include #include #include +#include #include #include @@ -33,6 +34,7 @@ static void pabort(const char *s) static const char *device = "/dev/spidev1.1"; static uint32_t mode; static uint8_t bits = 8; +static char *input_file; static uint32_t speed = 500000; static uint16_t delay; static int verbose; @@ -144,6 +146,7 @@ static void print_usage(const char *prog) " -s --speed max speed (Hz)\n" " -d --delay delay (usec)\n" " -b --bpw bits per word \n" + " -i --input input data from a file (e.g. \"test.bin\")\n" " -l --loop loopback\n" " -H --cpha clock phase\n" " -O --cpol clock polarity\n" @@ -167,6 +170,7 @@ static void parse_opts(int argc, char *argv[]) { "speed", 1, 0, 's' }, { "delay", 1, 0, 'd' }, { "bpw", 1, 0, 'b' }, + { "input", 1, 0, 'i' }, { "loop", 0, 0, 'l' }, { "cpha", 0, 0, 'H' }, { "cpol", 0, 0, 'O' }, @@ -182,7 +186,8 @@ static void parse_opts(int argc, char *argv[]) }; int c; - c = getopt_long(argc, argv, "D:s:d:b:lHOLC3NR24p:v", lopts, NULL); + c = getopt_long(argc, argv, "D:s:d:b:i:lHOLC3NR24p:v", + lopts, NULL); if (c == -1) break; @@ -200,6 +205,9 @@ static void parse_opts(int argc, char *argv[]) case 'b': bits = atoi(optarg); break; + case 'i': + input_file = optarg; + break; case 'l': mode |= SPI_LOOP; break; @@ -269,6 +277,39 @@ static void transfer_escaped_string(int fd, char *str) free(tx); } +static void transfer_file(int fd, char *filename) +{ + ssize_t bytes; + struct stat sb; + int tx_fd; + uint8_t *tx; + uint8_t *rx; + + if (stat(filename, &sb) == -1) + pabort("can't stat input file"); + + tx_fd = open(filename, O_RDONLY); + if (fd < 0) + pabort("can't open input file"); + + tx = malloc(sb.st_size); + if (!tx) + pabort("can't allocate tx buffer"); + + rx = malloc(sb.st_size); + if (!rx) + pabort("can't allocate rx buffer"); + + bytes = read(tx_fd, tx, sb.st_size); + if (bytes != sb.st_size) + pabort("failed to read input file"); + + transfer(fd, tx, rx, sb.st_size); + free(rx); + free(tx); + close(tx_fd); +} + int main(int argc, char *argv[]) { int ret = 0; @@ -317,8 +358,13 @@ int main(int argc, char *argv[]) printf("bits per word: %d\n", bits); printf("max speed: %d Hz (%d KHz)\n", speed, speed/1000); + if (input_tx && input_file) + pabort("only one of -p and --input may be selected"); + if (input_tx) transfer_escaped_string(fd, input_tx); + else if (input_file) + transfer_file(fd, input_file); else transfer(fd, default_tx, default_rx, sizeof(default_tx)); -- cgit v0.10.2 From 983b27886a3c7f6eff4e987ddba932da74703f4e Mon Sep 17 00:00:00 2001 From: Joshua Clayton Date: Wed, 18 Nov 2015 14:30:40 -0800 Subject: spi: spidev_test: output to a file For testing of larger data transfers, output unmodified data directly to a file. Signed-off-by: Joshua Clayton Signed-off-by: Mark Brown diff --git a/tools/spi/spidev_test.c b/tools/spi/spidev_test.c index 71a45a4..02fc3a4 100644 --- a/tools/spi/spidev_test.c +++ b/tools/spi/spidev_test.c @@ -35,6 +35,7 @@ static const char *device = "/dev/spidev1.1"; static uint32_t mode; static uint8_t bits = 8; static char *input_file; +static char *output_file; static uint32_t speed = 500000; static uint16_t delay; static int verbose; @@ -105,7 +106,7 @@ static int unescape(char *_dst, char *_src, size_t len) static void transfer(int fd, uint8_t const *tx, uint8_t const *rx, size_t len) { int ret; - + int out_fd; struct spi_ioc_transfer tr = { .tx_buf = (unsigned long)tx, .rx_buf = (unsigned long)rx, @@ -136,7 +137,21 @@ static void transfer(int fd, uint8_t const *tx, uint8_t const *rx, size_t len) if (verbose) hex_dump(tx, len, 32, "TX"); - hex_dump(rx, len, 32, "RX"); + + if (output_file) { + out_fd = open(output_file, O_WRONLY | O_CREAT | O_TRUNC, 0666); + if (out_fd < 0) + pabort("could not open output file"); + + ret = write(out_fd, rx, len); + if (ret != len) + pabort("not all bytes written to utput file"); + + close(out_fd); + } + + if (verbose || !output_file) + hex_dump(rx, len, 32, "RX"); } static void print_usage(const char *prog) @@ -147,6 +162,7 @@ static void print_usage(const char *prog) " -d --delay delay (usec)\n" " -b --bpw bits per word \n" " -i --input input data from a file (e.g. \"test.bin\")\n" + " -o --output output data to a file (e.g. \"results.bin\")\n" " -l --loop loopback\n" " -H --cpha clock phase\n" " -O --cpol clock polarity\n" @@ -171,6 +187,7 @@ static void parse_opts(int argc, char *argv[]) { "delay", 1, 0, 'd' }, { "bpw", 1, 0, 'b' }, { "input", 1, 0, 'i' }, + { "output", 1, 0, 'o' }, { "loop", 0, 0, 'l' }, { "cpha", 0, 0, 'H' }, { "cpol", 0, 0, 'O' }, @@ -186,7 +203,7 @@ static void parse_opts(int argc, char *argv[]) }; int c; - c = getopt_long(argc, argv, "D:s:d:b:i:lHOLC3NR24p:v", + c = getopt_long(argc, argv, "D:s:d:b:i:o:lHOLC3NR24p:v", lopts, NULL); if (c == -1) @@ -208,6 +225,9 @@ static void parse_opts(int argc, char *argv[]) case 'i': input_file = optarg; break; + case 'o': + output_file = optarg; + break; case 'l': mode |= SPI_LOOP; break; -- cgit v0.10.2 From a20874f78be633b9e3a505d5f191735188b110a5 Mon Sep 17 00:00:00 2001 From: Joshua Clayton Date: Wed, 18 Nov 2015 14:30:41 -0800 Subject: spi: spidev_test: check error Check the result of sscanf to verify a result was found. report and error and abort if pattern was not found. Signed-off-by: Joshua Clayton Signed-off-by: Mark Brown diff --git a/tools/spi/spidev_test.c b/tools/spi/spidev_test.c index 02fc3a4..322370d 100644 --- a/tools/spi/spidev_test.c +++ b/tools/spi/spidev_test.c @@ -86,13 +86,17 @@ static void hex_dump(const void *src, size_t length, size_t line_size, char *pre static int unescape(char *_dst, char *_src, size_t len) { int ret = 0; + int match; char *src = _src; char *dst = _dst; unsigned int ch; while (*src) { if (*src == '\\' && *(src+1) == 'x') { - sscanf(src + 2, "%2x", &ch); + match = sscanf(src + 2, "%2x", &ch); + if (!match) + pabort("malformed input string"); + src += 4; *dst++ = (unsigned char)ch; } else { -- cgit v0.10.2 From b2cfc90428f1c24ce4920f06b584bd05c62741e6 Mon Sep 17 00:00:00 2001 From: Joshua Clayton Date: Wed, 18 Nov 2015 14:30:42 -0800 Subject: spi: spidev_test: fix whitespace Signed-off-by: Joshua Clayton Signed-off-by: Mark Brown diff --git a/tools/spi/spidev_test.c b/tools/spi/spidev_test.c index 322370d..eddfc33 100644 --- a/tools/spi/spidev_test.c +++ b/tools/spi/spidev_test.c @@ -52,7 +52,8 @@ uint8_t default_tx[] = { uint8_t default_rx[ARRAY_SIZE(default_tx)] = {0, }; char *input_tx; -static void hex_dump(const void *src, size_t length, size_t line_size, char *prefix) +static void hex_dump(const void *src, size_t length, size_t line_size, + char *prefix) { int i = 0; const unsigned char *address = src; @@ -164,7 +165,7 @@ static void print_usage(const char *prog) puts(" -D --device device to use (default /dev/spidev1.1)\n" " -s --speed max speed (Hz)\n" " -d --delay delay (usec)\n" - " -b --bpw bits per word \n" + " -b --bpw bits per word\n" " -i --input input data from a file (e.g. \"test.bin\")\n" " -o --output output data to a file (e.g. \"results.bin\")\n" " -l --loop loopback\n" -- cgit v0.10.2 From de2c6e58554c7df3db70c68e52f982e558895ecf Mon Sep 17 00:00:00 2001 From: Joshua Clayton Date: Sat, 28 Nov 2015 13:28:18 -0800 Subject: spi: tools: move spidev_test metadata Now that spidev_test and spidev_fdx have been moved, remove them from the Documentation index and move their .gitignore file. Signed-off-by: Joshua Clayton Signed-off-by: Mark Brown diff --git a/Documentation/spi/.gitignore b/Documentation/spi/.gitignore deleted file mode 100644 index 4280576..0000000 --- a/Documentation/spi/.gitignore +++ /dev/null @@ -1,2 +0,0 @@ -spidev_fdx -spidev_test diff --git a/Documentation/spi/00-INDEX b/Documentation/spi/00-INDEX index a128fa8..4644bf0 100644 --- a/Documentation/spi/00-INDEX +++ b/Documentation/spi/00-INDEX @@ -10,13 +10,9 @@ pxa2xx - PXA2xx SPI master controller build by spi_message fifo wq spidev - Intro to the userspace API for spi devices -spidev_fdx.c - - spidev example file spi-lm70llp - Connecting an LM70-LLP sensor to the kernel via the SPI subsys. spi-sc18is602 - NXP SC18IS602/603 I2C-bus to SPI bridge spi-summary - (Linux) SPI overview. If unsure about SPI or SPI in Linux, start here. -spidev_test.c - - SPI testing utility. diff --git a/tools/spi/.gitignore b/tools/spi/.gitignore new file mode 100644 index 0000000..4280576 --- /dev/null +++ b/tools/spi/.gitignore @@ -0,0 +1,2 @@ +spidev_fdx +spidev_test -- cgit v0.10.2 From ec7f9eb4bea26b627cb5f15ebbfb5b06f969511d Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Mon, 30 Nov 2015 15:14:00 +0100 Subject: spi: sh-msiof: Add support for SH-Mobile AG5 MSIOF in SH-Mobile AG5 (sh73a0) is handled fine by the existing driver. Signed-off-by: Geert Uytterhoeven Signed-off-by: Mark Brown diff --git a/Documentation/devicetree/bindings/spi/sh-msiof.txt b/Documentation/devicetree/bindings/spi/sh-msiof.txt index 705075d..aa005c1 100644 --- a/Documentation/devicetree/bindings/spi/sh-msiof.txt +++ b/Documentation/devicetree/bindings/spi/sh-msiof.txt @@ -10,6 +10,7 @@ Required properties: "renesas,msiof-r8a7792" (R-Car V2H) "renesas,msiof-r8a7793" (R-Car M2-N) "renesas,msiof-r8a7794" (R-Car E2) + "renesas,msiof-sh73a0" (SH-Mobile AG5) - reg : A list of offsets and lengths of the register sets for the device. If only one register set is present, it is to be used -- cgit v0.10.2 From f15c58410ad90bd1208305771689877ffffe3a88 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Mon, 30 Nov 2015 15:19:06 +0100 Subject: spi: spidev: Use "%u" to format __u32 On 64-bit with CONFIG_SPI_DEBUG=y and #define VERBOSE: drivers/spi/spidev.c:287:3: warning: format '%zd' expects argument of type 'signed size_t', but argument 4 has type '__u32' [-Wformat=] Signed-off-by: Geert Uytterhoeven Signed-off-by: Mark Brown diff --git a/drivers/spi/spidev.c b/drivers/spi/spidev.c index 91a0fcd..9a8e47c 100644 --- a/drivers/spi/spidev.c +++ b/drivers/spi/spidev.c @@ -284,7 +284,7 @@ static int spidev_message(struct spidev_data *spidev, k_tmp->speed_hz = spidev->speed_hz; #ifdef VERBOSE dev_dbg(&spidev->spi->dev, - " xfer len %zd %s%s%s%dbits %u usec %uHz\n", + " xfer len %u %s%s%s%dbits %u usec %uHz\n", u_tmp->len, u_tmp->rx_buf ? "rx " : "", u_tmp->tx_buf ? "tx " : "", -- cgit v0.10.2 From 3b1884c24c98dada51fc4b05735773f0078711d2 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Mon, 30 Nov 2015 15:28:06 +0100 Subject: spi: Uninline spi_unregister_device() Uninline spi_unregister_device() in preparation of adding more code to it. Add kerneldoc documentation while we're at it. Signed-off-by: Geert Uytterhoeven Signed-off-by: Mark Brown diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c index e2415be..3f135cc 100644 --- a/drivers/spi/spi.c +++ b/drivers/spi/spi.c @@ -604,6 +604,20 @@ struct spi_device *spi_new_device(struct spi_master *master, } EXPORT_SYMBOL_GPL(spi_new_device); +/** + * spi_unregister_device - unregister a single SPI device + * @spi: spi_device to unregister + * + * Start making the passed SPI device vanish. Normally this would be handled + * by spi_unregister_master(). + */ +void spi_unregister_device(struct spi_device *spi) +{ + if (spi) + device_unregister(&spi->dev); +} +EXPORT_SYMBOL_GPL(spi_unregister_device); + static void spi_match_master_to_boardinfo(struct spi_master *master, struct spi_board_info *bi) { diff --git a/include/linux/spi/spi.h b/include/linux/spi/spi.h index cce80e6..075bede 100644 --- a/include/linux/spi/spi.h +++ b/include/linux/spi/spi.h @@ -1115,12 +1115,7 @@ spi_add_device(struct spi_device *spi); extern struct spi_device * spi_new_device(struct spi_master *, struct spi_board_info *); -static inline void -spi_unregister_device(struct spi_device *spi) -{ - if (spi) - device_unregister(&spi->dev); -} +extern void spi_unregister_device(struct spi_device *spi); extern const struct spi_device_id * spi_get_device_id(const struct spi_device *sdev); -- cgit v0.10.2 From bd6c1644a2f6f46cdf89388e81168a70711fce3a Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Mon, 30 Nov 2015 15:28:07 +0100 Subject: spi: Mark instantiated device nodes with OF_POPULATE Mark (and unmark) device nodes with the POPULATE flag as appropriate. This is required to avoid multi probing when enabling and populating SPI buses in DT overlays. Based on commit 4f001fd30145a6a8 ("i2c: Mark instantiated device nodes with OF_POPULATE"). Suggested-by: Mark Brown Signed-off-by: Geert Uytterhoeven Signed-off-by: Mark Brown diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c index 3f135cc..c7486a3 100644 --- a/drivers/spi/spi.c +++ b/drivers/spi/spi.c @@ -613,8 +613,12 @@ EXPORT_SYMBOL_GPL(spi_new_device); */ void spi_unregister_device(struct spi_device *spi) { - if (spi) - device_unregister(&spi->dev); + if (!spi) + return; + + if (spi->dev.of_node) + of_node_clear_flag(spi->dev.of_node, OF_POPULATED); + device_unregister(&spi->dev); } EXPORT_SYMBOL_GPL(spi_unregister_device); @@ -1561,6 +1565,8 @@ static void of_register_spi_devices(struct spi_master *master) return; for_each_available_child_of_node(master->dev.of_node, nc) { + if (of_node_test_and_set_flag(nc, OF_POPULATED)) + continue; spi = of_register_spi_device(master, nc); if (IS_ERR(spi)) dev_warn(&master->dev, "Failed to create SPI device for %s\n", @@ -2645,6 +2651,11 @@ static int of_spi_notify(struct notifier_block *nb, unsigned long action, if (master == NULL) return NOTIFY_OK; /* not for us */ + if (of_node_test_and_set_flag(rd->dn, OF_POPULATED)) { + put_device(&master->dev); + return NOTIFY_OK; + } + spi = of_register_spi_device(master, rd->dn); put_device(&master->dev); @@ -2656,6 +2667,10 @@ static int of_spi_notify(struct notifier_block *nb, unsigned long action, break; case OF_RECONFIG_CHANGE_REMOVE: + /* already depopulated? */ + if (!of_node_check_flag(rd->dn, OF_POPULATED)) + return NOTIFY_OK; + /* find our device by node */ spi = of_find_spi_device_by_node(rd->dn); if (spi == NULL) -- cgit v0.10.2 From edd3899c8cd2a7f11d23686e375359f8ab1f818a Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Fri, 4 Dec 2015 10:59:14 -0200 Subject: spi: spidev_test: Fix typo in error message Fix the spelling of 'output' in the error message. Signed-off-by: Fabio Estevam Signed-off-by: Mark Brown diff --git a/tools/spi/spidev_test.c b/tools/spi/spidev_test.c index eddfc33..8a73d81 100644 --- a/tools/spi/spidev_test.c +++ b/tools/spi/spidev_test.c @@ -150,7 +150,7 @@ static void transfer(int fd, uint8_t const *tx, uint8_t const *rx, size_t len) ret = write(out_fd, rx, len); if (ret != len) - pabort("not all bytes written to utput file"); + pabort("not all bytes written to output file"); close(out_fd); } -- cgit v0.10.2 From cc023478dc8a3ab07828620dd80303fcd81fb227 Mon Sep 17 00:00:00 2001 From: Sylwester Nawrocki Date: Tue, 29 Dec 2015 18:34:40 +0100 Subject: spi: s3c64xx: Remove unused platform_device_id entries s5pv210 and exynos4 are now DT only platforms hence these entries can now be safely removed from the match table. Signed-off-by: Sylwester Nawrocki Signed-off-by: Mark Brown diff --git a/drivers/spi/spi-s3c64xx.c b/drivers/spi/spi-s3c64xx.c index b954c54..5a76a50 100644 --- a/drivers/spi/spi-s3c64xx.c +++ b/drivers/spi/spi-s3c64xx.c @@ -1357,12 +1357,6 @@ static const struct platform_device_id s3c64xx_spi_driver_ids[] = { }, { .name = "s3c6410-spi", .driver_data = (kernel_ulong_t)&s3c6410_spi_port_config, - }, { - .name = "s5pv210-spi", - .driver_data = (kernel_ulong_t)&s5pv210_spi_port_config, - }, { - .name = "exynos4210-spi", - .driver_data = (kernel_ulong_t)&exynos4_spi_port_config, }, { }, }; -- cgit v0.10.2