From c58b84ee467bfd08b39fbda56757ba19ac50980a Mon Sep 17 00:00:00 2001
From: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Date: Wed, 5 Oct 2016 06:46:49 -0300
Subject: [media] af9005: don't do DMA on stack

The USB control messages require DMA to work. We cannot pass
a stack-allocated buffer, as it is not warranted that the
stack would be into a DMA enabled area.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

diff --git a/drivers/media/usb/dvb-usb/af9005.c b/drivers/media/usb/dvb-usb/af9005.c
index efa782e..b257780 100644
--- a/drivers/media/usb/dvb-usb/af9005.c
+++ b/drivers/media/usb/dvb-usb/af9005.c
@@ -52,17 +52,16 @@ u8 regmask[8] = { 0x01, 0x03, 0x07, 0x0f, 0x1f, 0x3f, 0x7f, 0xff };
 struct af9005_device_state {
 	u8 sequence;
 	int led_state;
+	unsigned char data[256];
+	struct mutex data_mutex;
 };
 
 static int af9005_generic_read_write(struct dvb_usb_device *d, u16 reg,
 			      int readwrite, int type, u8 * values, int len)
 {
 	struct af9005_device_state *st = d->priv;
-	u8 obuf[16] = { 0 };
-	u8 ibuf[17] = { 0 };
-	u8 command;
-	int i;
-	int ret;
+	u8 command, seq;
+	int i, ret;
 
 	if (len < 1) {
 		err("generic read/write, less than 1 byte. Makes no sense.");
@@ -73,16 +72,17 @@ static int af9005_generic_read_write(struct dvb_usb_device *d, u16 reg,
 		return -EINVAL;
 	}
 
-	obuf[0] = 14;		/* rest of buffer length low */
-	obuf[1] = 0;		/* rest of buffer length high */
+	mutex_lock(&st->data_mutex);
+	st->data[0] = 14;		/* rest of buffer length low */
+	st->data[1] = 0;		/* rest of buffer length high */
 
-	obuf[2] = AF9005_REGISTER_RW;	/* register operation */
-	obuf[3] = 12;		/* rest of buffer length */
+	st->data[2] = AF9005_REGISTER_RW;	/* register operation */
+	st->data[3] = 12;		/* rest of buffer length */
 
-	obuf[4] = st->sequence++;	/* sequence number */
+	st->data[4] = seq = st->sequence++;	/* sequence number */
 
-	obuf[5] = (u8) (reg >> 8);	/* register address */
-	obuf[6] = (u8) (reg & 0xff);
+	st->data[5] = (u8) (reg >> 8);	/* register address */
+	st->data[6] = (u8) (reg & 0xff);
 
 	if (type == AF9005_OFDM_REG) {
 		command = AF9005_CMD_OFDM_REG;
@@ -96,51 +96,52 @@ static int af9005_generic_read_write(struct dvb_usb_device *d, u16 reg,
 	command |= readwrite;
 	if (readwrite == AF9005_CMD_WRITE)
 		for (i = 0; i < len; i++)
-			obuf[8 + i] = values[i];
+			st->data[8 + i] = values[i];
 	else if (type == AF9005_TUNER_REG)
 		/* read command for tuner, the first byte contains the i2c address */
-		obuf[8] = values[0];
-	obuf[7] = command;
+		st->data[8] = values[0];
+	st->data[7] = command;
 
-	ret = dvb_usb_generic_rw(d, obuf, 16, ibuf, 17, 0);
+	ret = dvb_usb_generic_rw(d, st->data, 16, st->data, 17, 0);
 	if (ret)
-		return ret;
+		goto ret;
 
 	/* sanity check */
-	if (ibuf[2] != AF9005_REGISTER_RW_ACK) {
+	if (st->data[2] != AF9005_REGISTER_RW_ACK) {
 		err("generic read/write, wrong reply code.");
-		return -EIO;
+		ret = -EIO;
+		goto ret;
 	}
-	if (ibuf[3] != 0x0d) {
+	if (st->data[3] != 0x0d) {
 		err("generic read/write, wrong length in reply.");
-		return -EIO;
+		ret = -EIO;
+		goto ret;
 	}
-	if (ibuf[4] != obuf[4]) {
+	if (st->data[4] != seq) {
 		err("generic read/write, wrong sequence in reply.");
-		return -EIO;
+		ret = -EIO;
+		goto ret;
 	}
 	/*
-	   Windows driver doesn't check these fields, in fact sometimes
-	   the register in the reply is different that what has been sent
-
-	   if (ibuf[5] != obuf[5] || ibuf[6] != obuf[6]) {
-	   err("generic read/write, wrong register in reply.");
-	   return -EIO;
-	   }
-	   if (ibuf[7] != command) {
-	   err("generic read/write wrong command in reply.");
-	   return -EIO;
-	   }
+	 * In thesis, both input and output buffers should have
+	 * identical values for st->data[5] to st->data[8].
+	 * However, windows driver doesn't check these fields, in fact
+	 * sometimes the register in the reply is different that what
+	 * has been sent
 	 */
-	if (ibuf[16] != 0x01) {
+	if (st->data[16] != 0x01) {
 		err("generic read/write wrong status code in reply.");
-		return -EIO;
+		ret = -EIO;
+		goto ret;
 	}
+
 	if (readwrite == AF9005_CMD_READ)
 		for (i = 0; i < len; i++)
-			values[i] = ibuf[8 + i];
+			values[i] = st->data[8 + i];
 
-	return 0;
+ret:
+	mutex_unlock(&st->data_mutex);
+	return ret;
 
 }
 
@@ -464,8 +465,7 @@ int af9005_send_command(struct dvb_usb_device *d, u8 command, u8 * wbuf,
 	struct af9005_device_state *st = d->priv;
 
 	int ret, i, packet_len;
-	u8 buf[64];
-	u8 ibuf[64];
+	u8 seq;
 
 	if (wlen < 0) {
 		err("send command, wlen less than 0 bytes. Makes no sense.");
@@ -480,94 +480,97 @@ int af9005_send_command(struct dvb_usb_device *d, u8 command, u8 * wbuf,
 		return -EINVAL;
 	}
 	packet_len = wlen + 5;
-	buf[0] = (u8) (packet_len & 0xff);
-	buf[1] = (u8) ((packet_len & 0xff00) >> 8);
-
-	buf[2] = 0x26;		/* packet type */
-	buf[3] = wlen + 3;
-	buf[4] = st->sequence++;
-	buf[5] = command;
-	buf[6] = wlen;
+
+	mutex_lock(&st->data_mutex);
+
+	st->data[0] = (u8) (packet_len & 0xff);
+	st->data[1] = (u8) ((packet_len & 0xff00) >> 8);
+
+	st->data[2] = 0x26;		/* packet type */
+	st->data[3] = wlen + 3;
+	st->data[4] = seq = st->sequence++;
+	st->data[5] = command;
+	st->data[6] = wlen;
 	for (i = 0; i < wlen; i++)
-		buf[7 + i] = wbuf[i];
-	ret = dvb_usb_generic_rw(d, buf, wlen + 7, ibuf, rlen + 7, 0);
-	if (ret)
-		return ret;
-	if (ibuf[2] != 0x27) {
+		st->data[7 + i] = wbuf[i];
+	ret = dvb_usb_generic_rw(d, st->data, wlen + 7, st->data, rlen + 7, 0);
+	if (st->data[2] != 0x27) {
 		err("send command, wrong reply code.");
-		return -EIO;
-	}
-	if (ibuf[4] != buf[4]) {
+		ret = -EIO;
+	} else if (st->data[4] != seq) {
 		err("send command, wrong sequence in reply.");
-		return -EIO;
-	}
-	if (ibuf[5] != 0x01) {
+		ret = -EIO;
+	} else if (st->data[5] != 0x01) {
 		err("send command, wrong status code in reply.");
-		return -EIO;
-	}
-	if (ibuf[6] != rlen) {
+		ret = -EIO;
+	} else if (st->data[6] != rlen) {
 		err("send command, invalid data length in reply.");
-		return -EIO;
+		ret = -EIO;
 	}
-	for (i = 0; i < rlen; i++)
-		rbuf[i] = ibuf[i + 7];
-	return 0;
+	if (!ret) {
+		for (i = 0; i < rlen; i++)
+			rbuf[i] = st->data[i + 7];
+	}
+
+	mutex_unlock(&st->data_mutex);
+	return ret;
 }
 
 int af9005_read_eeprom(struct dvb_usb_device *d, u8 address, u8 * values,
 		       int len)
 {
 	struct af9005_device_state *st = d->priv;
-	u8 obuf[16], ibuf[14];
+	u8 seq;
 	int ret, i;
 
-	memset(obuf, 0, sizeof(obuf));
-	memset(ibuf, 0, sizeof(ibuf));
+	mutex_lock(&st->data_mutex);
 
-	obuf[0] = 14;		/* length of rest of packet low */
-	obuf[1] = 0;		/* length of rest of packer high */
+	memset(st->data, 0, sizeof(st->data));
 
-	obuf[2] = 0x2a;		/* read/write eeprom */
+	st->data[0] = 14;		/* length of rest of packet low */
+	st->data[1] = 0;		/* length of rest of packer high */
 
-	obuf[3] = 12;		/* size */
+	st->data[2] = 0x2a;		/* read/write eeprom */
 
-	obuf[4] = st->sequence++;
+	st->data[3] = 12;		/* size */
 
-	obuf[5] = 0;		/* read */
+	st->data[4] = seq = st->sequence++;
 
-	obuf[6] = len;
-	obuf[7] = address;
-	ret = dvb_usb_generic_rw(d, obuf, 16, ibuf, 14, 0);
-	if (ret)
-		return ret;
-	if (ibuf[2] != 0x2b) {
+	st->data[5] = 0;		/* read */
+
+	st->data[6] = len;
+	st->data[7] = address;
+	ret = dvb_usb_generic_rw(d, st->data, 16, st->data, 14, 0);
+	if (st->data[2] != 0x2b) {
 		err("Read eeprom, invalid reply code");
-		return -EIO;
-	}
-	if (ibuf[3] != 10) {
+		ret = -EIO;
+	} else if (st->data[3] != 10) {
 		err("Read eeprom, invalid reply length");
-		return -EIO;
-	}
-	if (ibuf[4] != obuf[4]) {
+		ret = -EIO;
+	} else if (st->data[4] != seq) {
 		err("Read eeprom, wrong sequence in reply ");
-		return -EIO;
-	}
-	if (ibuf[5] != 1) {
+		ret = -EIO;
+	} else if (st->data[5] != 1) {
 		err("Read eeprom, wrong status in reply ");
-		return -EIO;
+		ret = -EIO;
 	}
-	for (i = 0; i < len; i++) {
-		values[i] = ibuf[6 + i];
+
+	if (!ret) {
+		for (i = 0; i < len; i++)
+			values[i] = st->data[6 + i];
 	}
-	return 0;
+	mutex_unlock(&st->data_mutex);
+
+	return ret;
 }
 
-static int af9005_boot_packet(struct usb_device *udev, int type, u8 * reply)
+static int af9005_boot_packet(struct usb_device *udev, int type, u8 *reply,
+			      u8 *buf, int size)
 {
-	u8 buf[FW_BULKOUT_SIZE + 2];
 	u16 checksum;
 	int act_len, i, ret;
-	memset(buf, 0, sizeof(buf));
+
+	memset(buf, 0, size);
 	buf[0] = (u8) (FW_BULKOUT_SIZE & 0xff);
 	buf[1] = (u8) ((FW_BULKOUT_SIZE >> 8) & 0xff);
 	switch (type) {
@@ -720,15 +723,21 @@ static int af9005_download_firmware(struct usb_device *udev, const struct firmwa
 {
 	int i, packets, ret, act_len;
 
-	u8 buf[FW_BULKOUT_SIZE + 2];
+	u8 *buf;
 	u8 reply;
 
-	ret = af9005_boot_packet(udev, FW_CONFIG, &reply);
+	buf = kmalloc(FW_BULKOUT_SIZE + 2, GFP_KERNEL);
+	if (!buf)
+		return -ENOMEM;
+
+	ret = af9005_boot_packet(udev, FW_CONFIG, &reply, buf,
+				 FW_BULKOUT_SIZE + 2);
 	if (ret)
-		return ret;
+		goto err;
 	if (reply != 0x01) {
 		err("before downloading firmware, FW_CONFIG expected 0x01, received 0x%x", reply);
-		return -EIO;
+		ret = -EIO;
+		goto err;
 	}
 	packets = fw->size / FW_BULKOUT_SIZE;
 	buf[0] = (u8) (FW_BULKOUT_SIZE & 0xff);
@@ -743,28 +752,35 @@ static int af9005_download_firmware(struct usb_device *udev, const struct firmwa
 				   buf, FW_BULKOUT_SIZE + 2, &act_len, 1000);
 		if (ret) {
 			err("firmware download failed at packet %d with code %d", i, ret);
-			return ret;
+			goto err;
 		}
 	}
-	ret = af9005_boot_packet(udev, FW_CONFIRM, &reply);
+	ret = af9005_boot_packet(udev, FW_CONFIRM, &reply,
+				 buf, FW_BULKOUT_SIZE + 2);
 	if (ret)
-		return ret;
+		goto err;
 	if (reply != (u8) (packets & 0xff)) {
 		err("after downloading firmware, FW_CONFIRM expected 0x%x, received 0x%x", packets & 0xff, reply);
-		return -EIO;
+		ret = -EIO;
+		goto err;
 	}
-	ret = af9005_boot_packet(udev, FW_BOOT, &reply);
+	ret = af9005_boot_packet(udev, FW_BOOT, &reply, buf,
+				 FW_BULKOUT_SIZE + 2);
 	if (ret)
-		return ret;
-	ret = af9005_boot_packet(udev, FW_CONFIG, &reply);
+		goto err;
+	ret = af9005_boot_packet(udev, FW_CONFIG, &reply, buf,
+				 FW_BULKOUT_SIZE + 2);
 	if (ret)
-		return ret;
+		goto err;
 	if (reply != 0x02) {
 		err("after downloading firmware, FW_CONFIG expected 0x02, received 0x%x", reply);
-		return -EIO;
+		ret = -EIO;
+		goto err;
 	}
 
-	return 0;
+err:
+	kfree(buf);
+	return ret;
 
 }
 
@@ -823,53 +839,59 @@ static int af9005_rc_query(struct dvb_usb_device *d, u32 * event, int *state)
 {
 	struct af9005_device_state *st = d->priv;
 	int ret, len;
-
-	u8 obuf[5];
-	u8 ibuf[256];
+	u8 seq;
 
 	*state = REMOTE_NO_KEY_PRESSED;
 	if (rc_decode == NULL) {
 		/* it shouldn't never come here */
 		return 0;
 	}
+
+	mutex_lock(&st->data_mutex);
+
 	/* deb_info("rc_query\n"); */
-	obuf[0] = 3;		/* rest of packet length low */
-	obuf[1] = 0;		/* rest of packet lentgh high */
-	obuf[2] = 0x40;		/* read remote */
-	obuf[3] = 1;		/* rest of packet length */
-	obuf[4] = st->sequence++;	/* sequence number */
-	ret = dvb_usb_generic_rw(d, obuf, 5, ibuf, 256, 0);
+	st->data[0] = 3;		/* rest of packet length low */
+	st->data[1] = 0;		/* rest of packet lentgh high */
+	st->data[2] = 0x40;		/* read remote */
+	st->data[3] = 1;		/* rest of packet length */
+	st->data[4] = seq = st->sequence++;	/* sequence number */
+	ret = dvb_usb_generic_rw(d, st->data, 5, st->data, 256, 0);
 	if (ret) {
 		err("rc query failed");
-		return ret;
+		goto ret;
 	}
-	if (ibuf[2] != 0x41) {
+	if (st->data[2] != 0x41) {
 		err("rc query bad header.");
-		return -EIO;
-	}
-	if (ibuf[4] != obuf[4]) {
+		ret = -EIO;
+		goto ret;
+	} else if (st->data[4] != seq) {
 		err("rc query bad sequence.");
-		return -EIO;
+		ret = -EIO;
+		goto ret;
 	}
-	len = ibuf[5];
+	len = st->data[5];
 	if (len > 246) {
 		err("rc query invalid length");
-		return -EIO;
+		ret = -EIO;
+		goto ret;
 	}
 	if (len > 0) {
 		deb_rc("rc data (%d) ", len);
-		debug_dump((ibuf + 6), len, deb_rc);
-		ret = rc_decode(d, &ibuf[6], len, event, state);
+		debug_dump((st->data + 6), len, deb_rc);
+		ret = rc_decode(d, &st->data[6], len, event, state);
 		if (ret) {
 			err("rc_decode failed");
-			return ret;
+			goto ret;
 		} else {
 			deb_rc("rc_decode state %x event %x\n", *state, *event);
 			if (*state == REMOTE_KEY_REPEAT)
 				*event = d->last_event;
 		}
 	}
-	return 0;
+
+ret:
+	mutex_unlock(&st->data_mutex);
+	return ret;
 }
 
 static int af9005_power_ctrl(struct dvb_usb_device *d, int onoff)
@@ -953,10 +975,16 @@ static int af9005_identify_state(struct usb_device *udev,
 				 int *cold)
 {
 	int ret;
-	u8 reply;
-	ret = af9005_boot_packet(udev, FW_CONFIG, &reply);
+	u8 reply, *buf;
+
+	buf = kmalloc(FW_BULKOUT_SIZE + 2, GFP_KERNEL);
+	if (!buf)
+		return -ENOMEM;
+
+	ret = af9005_boot_packet(udev, FW_CONFIG, &reply,
+				 buf, FW_BULKOUT_SIZE + 2);
 	if (ret)
-		return ret;
+		goto err;
 	deb_info("result of FW_CONFIG in identify state %d\n", reply);
 	if (reply == 0x01)
 		*cold = 1;
@@ -965,7 +993,10 @@ static int af9005_identify_state(struct usb_device *udev,
 	else
 		return -EIO;
 	deb_info("Identify state cold = %d\n", *cold);
-	return 0;
+
+err:
+	kfree(buf);
+	return ret;
 }
 
 static struct dvb_usb_device_properties af9005_properties;
@@ -973,8 +1004,20 @@ static struct dvb_usb_device_properties af9005_properties;
 static int af9005_usb_probe(struct usb_interface *intf,
 			    const struct usb_device_id *id)
 {
-	return dvb_usb_device_init(intf, &af9005_properties,
-				   THIS_MODULE, NULL, adapter_nr);
+	struct dvb_usb_device *d;
+	struct af9005_device_state *st;
+	int ret;
+
+	ret = dvb_usb_device_init(intf, &af9005_properties,
+				  THIS_MODULE, &d, adapter_nr);
+
+	if (ret < 0)
+		return ret;
+
+	st = d->priv;
+	mutex_init(&st->data_mutex);
+
+	return 0;
 }
 
 enum af9005_usb_table_entry {
-- 
cgit v0.10.2


From 5ef8ed0e5608f75805e41ef8abbe94a3597e6613 Mon Sep 17 00:00:00 2001
From: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Date: Wed, 5 Oct 2016 06:02:19 -0300
Subject: [media] cinergyT2-core: don't do DMA on stack

The USB control messages require DMA to work. We cannot pass
a stack-allocated buffer, as it is not warranted that the
stack would be into a DMA enabled area.

Reviewed-by: Patrick Boettcher <patrick.boettcher@posteo.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

diff --git a/drivers/media/usb/dvb-usb/cinergyT2-core.c b/drivers/media/usb/dvb-usb/cinergyT2-core.c
index 9fd1527..d85c0c4 100644
--- a/drivers/media/usb/dvb-usb/cinergyT2-core.c
+++ b/drivers/media/usb/dvb-usb/cinergyT2-core.c
@@ -41,6 +41,8 @@ DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
 
 struct cinergyt2_state {
 	u8 rc_counter;
+	unsigned char data[64];
+	struct mutex data_mutex;
 };
 
 /* We are missing a release hook with usb_device data */
@@ -50,33 +52,52 @@ static struct dvb_usb_device_properties cinergyt2_properties;
 
 static int cinergyt2_streaming_ctrl(struct dvb_usb_adapter *adap, int enable)
 {
-	char buf[] = { CINERGYT2_EP1_CONTROL_STREAM_TRANSFER, enable ? 1 : 0 };
-	char result[64];
-	return dvb_usb_generic_rw(adap->dev, buf, sizeof(buf), result,
-				sizeof(result), 0);
+	struct dvb_usb_device *d = adap->dev;
+	struct cinergyt2_state *st = d->priv;
+	int ret;
+
+	mutex_lock(&st->data_mutex);
+	st->data[0] = CINERGYT2_EP1_CONTROL_STREAM_TRANSFER;
+	st->data[1] = enable ? 1 : 0;
+
+	ret = dvb_usb_generic_rw(d, st->data, 2, st->data, 64, 0);
+	mutex_unlock(&st->data_mutex);
+
+	return ret;
 }
 
 static int cinergyt2_power_ctrl(struct dvb_usb_device *d, int enable)
 {
-	char buf[] = { CINERGYT2_EP1_SLEEP_MODE, enable ? 0 : 1 };
-	char state[3];
-	return dvb_usb_generic_rw(d, buf, sizeof(buf), state, sizeof(state), 0);
+	struct cinergyt2_state *st = d->priv;
+	int ret;
+
+	mutex_lock(&st->data_mutex);
+	st->data[0] = CINERGYT2_EP1_SLEEP_MODE;
+	st->data[1] = enable ? 0 : 1;
+
+	ret = dvb_usb_generic_rw(d, st->data, 2, st->data, 3, 0);
+	mutex_unlock(&st->data_mutex);
+
+	return ret;
 }
 
 static int cinergyt2_frontend_attach(struct dvb_usb_adapter *adap)
 {
-	char query[] = { CINERGYT2_EP1_GET_FIRMWARE_VERSION };
-	char state[3];
+	struct dvb_usb_device *d = adap->dev;
+	struct cinergyt2_state *st = d->priv;
 	int ret;
 
 	adap->fe_adap[0].fe = cinergyt2_fe_attach(adap->dev);
 
-	ret = dvb_usb_generic_rw(adap->dev, query, sizeof(query), state,
-				sizeof(state), 0);
+	mutex_lock(&st->data_mutex);
+	st->data[0] = CINERGYT2_EP1_GET_FIRMWARE_VERSION;
+
+	ret = dvb_usb_generic_rw(d, st->data, 1, st->data, 3, 0);
 	if (ret < 0) {
 		deb_rc("cinergyt2_power_ctrl() Failed to retrieve sleep "
 			"state info\n");
 	}
+	mutex_unlock(&st->data_mutex);
 
 	/* Copy this pointer as we are gonna need it in the release phase */
 	cinergyt2_usb_device = adap->dev;
@@ -141,13 +162,16 @@ static int repeatable_keys[] = {
 static int cinergyt2_rc_query(struct dvb_usb_device *d, u32 *event, int *state)
 {
 	struct cinergyt2_state *st = d->priv;
-	u8 key[5] = {0, 0, 0, 0, 0}, cmd = CINERGYT2_EP1_GET_RC_EVENTS;
 	int i;
 
 	*state = REMOTE_NO_KEY_PRESSED;
 
-	dvb_usb_generic_rw(d, &cmd, 1, key, sizeof(key), 0);
-	if (key[4] == 0xff) {
+	mutex_lock(&st->data_mutex);
+	st->data[0] = CINERGYT2_EP1_GET_RC_EVENTS;
+
+	dvb_usb_generic_rw(d, st->data, 1, st->data, 5, 0);
+
+	if (st->data[4] == 0xff) {
 		/* key repeat */
 		st->rc_counter++;
 		if (st->rc_counter > RC_REPEAT_DELAY) {
@@ -157,31 +181,45 @@ static int cinergyt2_rc_query(struct dvb_usb_device *d, u32 *event, int *state)
 					*event = d->last_event;
 					deb_rc("repeat key, event %x\n",
 						   *event);
-					return 0;
+					goto ret;
 				}
 			}
 			deb_rc("repeated key (non repeatable)\n");
 		}
-		return 0;
+		goto ret;
 	}
 
 	/* hack to pass checksum on the custom field */
-	key[2] = ~key[1];
-	dvb_usb_nec_rc_key_to_event(d, key, event, state);
-	if (key[0] != 0) {
+	st->data[2] = ~st->data[1];
+	dvb_usb_nec_rc_key_to_event(d, st->data, event, state);
+	if (st->data[0] != 0) {
 		if (*event != d->last_event)
 			st->rc_counter = 0;
 
-		deb_rc("key: %*ph\n", 5, key);
+		deb_rc("key: %*ph\n", 5, st->data);
 	}
-	return 0;
+
+ret:
+	mutex_unlock(&st->data_mutex);
+	return ret;
 }
 
 static int cinergyt2_usb_probe(struct usb_interface *intf,
 				const struct usb_device_id *id)
 {
-	return dvb_usb_device_init(intf, &cinergyt2_properties,
-					THIS_MODULE, NULL, adapter_nr);
+	struct dvb_usb_device *d;
+	struct cinergyt2_state *st;
+	int ret;
+
+	ret = dvb_usb_device_init(intf, &cinergyt2_properties,
+				  THIS_MODULE, &d, adapter_nr);
+	if (ret < 0)
+		return ret;
+
+	st = d->priv;
+	mutex_init(&st->data_mutex);
+
+	return 0;
 }
 
 
-- 
cgit v0.10.2


From 54d577a4c91ba5dfe634ddee26223bc9a39687a7 Mon Sep 17 00:00:00 2001
From: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Date: Fri, 7 Oct 2016 13:54:33 -0300
Subject: [media] cinergyT2-core: handle error code on RC query

There's no sense on decoding and generating a RC key code if
there was an error on the URB control message.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

diff --git a/drivers/media/usb/dvb-usb/cinergyT2-core.c b/drivers/media/usb/dvb-usb/cinergyT2-core.c
index d85c0c4..8ac8254 100644
--- a/drivers/media/usb/dvb-usb/cinergyT2-core.c
+++ b/drivers/media/usb/dvb-usb/cinergyT2-core.c
@@ -102,7 +102,7 @@ static int cinergyt2_frontend_attach(struct dvb_usb_adapter *adap)
 	/* Copy this pointer as we are gonna need it in the release phase */
 	cinergyt2_usb_device = adap->dev;
 
-	return 0;
+	return ret;
 }
 
 static struct rc_map_table rc_map_cinergyt2_table[] = {
@@ -162,14 +162,16 @@ static int repeatable_keys[] = {
 static int cinergyt2_rc_query(struct dvb_usb_device *d, u32 *event, int *state)
 {
 	struct cinergyt2_state *st = d->priv;
-	int i;
+	int i, ret;
 
 	*state = REMOTE_NO_KEY_PRESSED;
 
 	mutex_lock(&st->data_mutex);
 	st->data[0] = CINERGYT2_EP1_GET_RC_EVENTS;
 
-	dvb_usb_generic_rw(d, st->data, 1, st->data, 5, 0);
+	ret = dvb_usb_generic_rw(d, st->data, 1, st->data, 5, 0);
+	if (ret < 0)
+		goto ret;
 
 	if (st->data[4] == 0xff) {
 		/* key repeat */
-- 
cgit v0.10.2


From c2730eef5fa180eec853f3775bebc4d74e6e6697 Mon Sep 17 00:00:00 2001
From: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Date: Fri, 7 Oct 2016 06:07:36 -0300
Subject: [media] cinergyT2-fe: cache stats at cinergyt2_fe_read_status()

Instead of sending USB commands for every stats call, collect
them once, when status is updated. As the frontend kthread
will call it on every few seconds, the stats will still be
collected.

Besides reducing the amount of USB/I2C transfers, this also
warrants that all stats will be collected at the same time,
and makes easier to convert it to DVBv5 stats in the future.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

diff --git a/drivers/media/usb/dvb-usb/cinergyT2-fe.c b/drivers/media/usb/dvb-usb/cinergyT2-fe.c
index b3ec743..fd8edcb 100644
--- a/drivers/media/usb/dvb-usb/cinergyT2-fe.c
+++ b/drivers/media/usb/dvb-usb/cinergyT2-fe.c
@@ -139,6 +139,7 @@ static uint16_t compute_tps(struct dtv_frontend_properties *op)
 struct cinergyt2_fe_state {
 	struct dvb_frontend fe;
 	struct dvb_usb_device *d;
+	struct dvbt_get_status_msg status;
 };
 
 static int cinergyt2_fe_read_status(struct dvb_frontend *fe,
@@ -154,6 +155,8 @@ static int cinergyt2_fe_read_status(struct dvb_frontend *fe,
 	if (ret < 0)
 		return ret;
 
+	state->status = result;
+
 	*status = 0;
 
 	if (0xffff - le16_to_cpu(result.gain) > 30)
@@ -177,34 +180,16 @@ static int cinergyt2_fe_read_status(struct dvb_frontend *fe,
 static int cinergyt2_fe_read_ber(struct dvb_frontend *fe, u32 *ber)
 {
 	struct cinergyt2_fe_state *state = fe->demodulator_priv;
-	struct dvbt_get_status_msg status;
-	char cmd[] = { CINERGYT2_EP1_GET_TUNER_STATUS };
-	int ret;
-
-	ret = dvb_usb_generic_rw(state->d, cmd, sizeof(cmd), (char *)&status,
-				sizeof(status), 0);
-	if (ret < 0)
-		return ret;
 
-	*ber = le32_to_cpu(status.viterbi_error_rate);
+	*ber = le32_to_cpu(state->status.viterbi_error_rate);
 	return 0;
 }
 
 static int cinergyt2_fe_read_unc_blocks(struct dvb_frontend *fe, u32 *unc)
 {
 	struct cinergyt2_fe_state *state = fe->demodulator_priv;
-	struct dvbt_get_status_msg status;
-	u8 cmd[] = { CINERGYT2_EP1_GET_TUNER_STATUS };
-	int ret;
 
-	ret = dvb_usb_generic_rw(state->d, cmd, sizeof(cmd), (u8 *)&status,
-				sizeof(status), 0);
-	if (ret < 0) {
-		err("cinergyt2_fe_read_unc_blocks() Failed! (Error=%d)\n",
-			ret);
-		return ret;
-	}
-	*unc = le32_to_cpu(status.uncorrected_block_count);
+	*unc = le32_to_cpu(state->status.uncorrected_block_count);
 	return 0;
 }
 
@@ -212,35 +197,16 @@ static int cinergyt2_fe_read_signal_strength(struct dvb_frontend *fe,
 						u16 *strength)
 {
 	struct cinergyt2_fe_state *state = fe->demodulator_priv;
-	struct dvbt_get_status_msg status;
-	char cmd[] = { CINERGYT2_EP1_GET_TUNER_STATUS };
-	int ret;
 
-	ret = dvb_usb_generic_rw(state->d, cmd, sizeof(cmd), (char *)&status,
-				sizeof(status), 0);
-	if (ret < 0) {
-		err("cinergyt2_fe_read_signal_strength() Failed!"
-			" (Error=%d)\n", ret);
-		return ret;
-	}
-	*strength = (0xffff - le16_to_cpu(status.gain));
+	*strength = (0xffff - le16_to_cpu(state->status.gain));
 	return 0;
 }
 
 static int cinergyt2_fe_read_snr(struct dvb_frontend *fe, u16 *snr)
 {
 	struct cinergyt2_fe_state *state = fe->demodulator_priv;
-	struct dvbt_get_status_msg status;
-	char cmd[] = { CINERGYT2_EP1_GET_TUNER_STATUS };
-	int ret;
 
-	ret = dvb_usb_generic_rw(state->d, cmd, sizeof(cmd), (char *)&status,
-				sizeof(status), 0);
-	if (ret < 0) {
-		err("cinergyt2_fe_read_snr() Failed! (Error=%d)\n", ret);
-		return ret;
-	}
-	*snr = (status.snr << 8) | status.snr;
+	*snr = (state->status.snr << 8) | state->status.snr;
 	return 0;
 }
 
-- 
cgit v0.10.2


From 0d43c0ff8b7e0a76136c602625efa5e6919baf9c Mon Sep 17 00:00:00 2001
From: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Date: Fri, 7 Oct 2016 06:16:59 -0300
Subject: [media] cinergyT2-fe: don't do DMA on stack

The USB control messages require DMA to work. We cannot pass
a stack-allocated buffer, as it is not warranted that the
stack would be into a DMA enabled area.

Reviewed-by: Patrick Boettcher <patrick.boettcher@posteo.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

diff --git a/drivers/media/usb/dvb-usb/cinergyT2-fe.c b/drivers/media/usb/dvb-usb/cinergyT2-fe.c
index fd8edcb..2d29b41 100644
--- a/drivers/media/usb/dvb-usb/cinergyT2-fe.c
+++ b/drivers/media/usb/dvb-usb/cinergyT2-fe.c
@@ -139,6 +139,10 @@ static uint16_t compute_tps(struct dtv_frontend_properties *op)
 struct cinergyt2_fe_state {
 	struct dvb_frontend fe;
 	struct dvb_usb_device *d;
+
+	unsigned char data[64];
+	struct mutex data_mutex;
+
 	struct dvbt_get_status_msg status;
 };
 
@@ -146,28 +150,31 @@ static int cinergyt2_fe_read_status(struct dvb_frontend *fe,
 				    enum fe_status *status)
 {
 	struct cinergyt2_fe_state *state = fe->demodulator_priv;
-	struct dvbt_get_status_msg result;
-	u8 cmd[] = { CINERGYT2_EP1_GET_TUNER_STATUS };
 	int ret;
 
-	ret = dvb_usb_generic_rw(state->d, cmd, sizeof(cmd), (u8 *)&result,
-			sizeof(result), 0);
+	mutex_lock(&state->data_mutex);
+	state->data[0] = CINERGYT2_EP1_GET_TUNER_STATUS;
+
+	ret = dvb_usb_generic_rw(state->d, state->data, 1,
+				 state->data, sizeof(state->status), 0);
+	if (!ret)
+		memcpy(&state->status, state->data, sizeof(state->status));
+	mutex_unlock(&state->data_mutex);
+
 	if (ret < 0)
 		return ret;
 
-	state->status = result;
-
 	*status = 0;
 
-	if (0xffff - le16_to_cpu(result.gain) > 30)
+	if (0xffff - le16_to_cpu(state->status.gain) > 30)
 		*status |= FE_HAS_SIGNAL;
-	if (result.lock_bits & (1 << 6))
+	if (state->status.lock_bits & (1 << 6))
 		*status |= FE_HAS_LOCK;
-	if (result.lock_bits & (1 << 5))
+	if (state->status.lock_bits & (1 << 5))
 		*status |= FE_HAS_SYNC;
-	if (result.lock_bits & (1 << 4))
+	if (state->status.lock_bits & (1 << 4))
 		*status |= FE_HAS_CARRIER;
-	if (result.lock_bits & (1 << 1))
+	if (state->status.lock_bits & (1 << 1))
 		*status |= FE_HAS_VITERBI;
 
 	if ((*status & (FE_HAS_CARRIER | FE_HAS_VITERBI | FE_HAS_SYNC)) !=
@@ -232,34 +239,36 @@ static int cinergyt2_fe_set_frontend(struct dvb_frontend *fe)
 {
 	struct dtv_frontend_properties *fep = &fe->dtv_property_cache;
 	struct cinergyt2_fe_state *state = fe->demodulator_priv;
-	struct dvbt_set_parameters_msg param;
-	char result[2];
+	struct dvbt_set_parameters_msg *param;
 	int err;
 
-	param.cmd = CINERGYT2_EP1_SET_TUNER_PARAMETERS;
-	param.tps = cpu_to_le16(compute_tps(fep));
-	param.freq = cpu_to_le32(fep->frequency / 1000);
-	param.flags = 0;
+	mutex_lock(&state->data_mutex);
+
+	param = (void *)state->data;
+	param->cmd = CINERGYT2_EP1_SET_TUNER_PARAMETERS;
+	param->tps = cpu_to_le16(compute_tps(fep));
+	param->freq = cpu_to_le32(fep->frequency / 1000);
+	param->flags = 0;
 
 	switch (fep->bandwidth_hz) {
 	default:
 	case 8000000:
-		param.bandwidth = 8;
+		param->bandwidth = 8;
 		break;
 	case 7000000:
-		param.bandwidth = 7;
+		param->bandwidth = 7;
 		break;
 	case 6000000:
-		param.bandwidth = 6;
+		param->bandwidth = 6;
 		break;
 	}
 
-	err = dvb_usb_generic_rw(state->d,
-			(char *)&param, sizeof(param),
-			result, sizeof(result), 0);
+	err = dvb_usb_generic_rw(state->d, state->data, sizeof(*param),
+				 state->data, 2, 0);
 	if (err < 0)
 		err("cinergyt2_fe_set_frontend() Failed! err=%d\n", err);
 
+	mutex_unlock(&state->data_mutex);
 	return (err < 0) ? err : 0;
 }
 
@@ -281,6 +290,7 @@ struct dvb_frontend *cinergyt2_fe_attach(struct dvb_usb_device *d)
 	s->d = d;
 	memcpy(&s->fe.ops, &cinergyt2_fe_ops, sizeof(struct dvb_frontend_ops));
 	s->fe.demodulator_priv = s;
+	mutex_init(&s->data_mutex);
 	return &s->fe;
 }
 
-- 
cgit v0.10.2


From 17ce039b4e5405c49d8c0d64e6d781cc6f4dc1ac Mon Sep 17 00:00:00 2001
From: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Date: Fri, 7 Oct 2016 06:30:27 -0300
Subject: [media] cxusb: don't do DMA on stack

The USB control messages require DMA to work. We cannot pass
a stack-allocated buffer, as it is not warranted that the
stack would be into a DMA enabled area.

Reviewed-by: Patrick Boettcher <patrick.boettcher@posteo.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

diff --git a/drivers/media/usb/dvb-usb/cxusb.c b/drivers/media/usb/dvb-usb/cxusb.c
index 907ac01..3977281 100644
--- a/drivers/media/usb/dvb-usb/cxusb.c
+++ b/drivers/media/usb/dvb-usb/cxusb.c
@@ -45,9 +45,6 @@
 #include "si2168.h"
 #include "si2157.h"
 
-/* Max transfer size done by I2C transfer functions */
-#define MAX_XFER_SIZE  80
-
 /* debug */
 static int dvb_usb_cxusb_debug;
 module_param_named(debug, dvb_usb_cxusb_debug, int, 0644);
@@ -61,23 +58,27 @@ DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
 static int cxusb_ctrl_msg(struct dvb_usb_device *d,
 			  u8 cmd, u8 *wbuf, int wlen, u8 *rbuf, int rlen)
 {
-	int wo = (rbuf == NULL || rlen == 0); /* write-only */
-	u8 sndbuf[MAX_XFER_SIZE];
+	struct cxusb_state *st = d->priv;
+	int ret, wo;
 
-	if (1 + wlen > sizeof(sndbuf)) {
-		warn("i2c wr: len=%d is too big!\n",
-		     wlen);
+	if (1 + wlen > MAX_XFER_SIZE) {
+		warn("i2c wr: len=%d is too big!\n", wlen);
 		return -EOPNOTSUPP;
 	}
 
-	memset(sndbuf, 0, 1+wlen);
+	wo = (rbuf == NULL || rlen == 0); /* write-only */
 
-	sndbuf[0] = cmd;
-	memcpy(&sndbuf[1], wbuf, wlen);
+	mutex_lock(&st->data_mutex);
+	st->data[0] = cmd;
+	memcpy(&st->data[1], wbuf, wlen);
 	if (wo)
-		return dvb_usb_generic_write(d, sndbuf, 1+wlen);
+		ret = dvb_usb_generic_write(d, st->data, 1 + wlen);
 	else
-		return dvb_usb_generic_rw(d, sndbuf, 1+wlen, rbuf, rlen, 0);
+		ret = dvb_usb_generic_rw(d, st->data, 1 + wlen,
+					 rbuf, rlen, 0);
+
+	mutex_unlock(&st->data_mutex);
+	return ret;
 }
 
 /* GPIO */
@@ -1460,36 +1461,43 @@ static struct dvb_usb_device_properties cxusb_mygica_t230_properties;
 static int cxusb_probe(struct usb_interface *intf,
 		       const struct usb_device_id *id)
 {
+	struct dvb_usb_device *d;
+	struct cxusb_state *st;
+
 	if (0 == dvb_usb_device_init(intf, &cxusb_medion_properties,
-				     THIS_MODULE, NULL, adapter_nr) ||
+				     THIS_MODULE, &d, adapter_nr) ||
 	    0 == dvb_usb_device_init(intf, &cxusb_bluebird_lgh064f_properties,
-				     THIS_MODULE, NULL, adapter_nr) ||
+				     THIS_MODULE, &d, adapter_nr) ||
 	    0 == dvb_usb_device_init(intf, &cxusb_bluebird_dee1601_properties,
-				     THIS_MODULE, NULL, adapter_nr) ||
+				     THIS_MODULE, &d, adapter_nr) ||
 	    0 == dvb_usb_device_init(intf, &cxusb_bluebird_lgz201_properties,
-				     THIS_MODULE, NULL, adapter_nr) ||
+				     THIS_MODULE, &d, adapter_nr) ||
 	    0 == dvb_usb_device_init(intf, &cxusb_bluebird_dtt7579_properties,
-				     THIS_MODULE, NULL, adapter_nr) ||
+				     THIS_MODULE, &d, adapter_nr) ||
 	    0 == dvb_usb_device_init(intf, &cxusb_bluebird_dualdig4_properties,
-				     THIS_MODULE, NULL, adapter_nr) ||
+				     THIS_MODULE, &d, adapter_nr) ||
 	    0 == dvb_usb_device_init(intf, &cxusb_bluebird_nano2_properties,
-				     THIS_MODULE, NULL, adapter_nr) ||
+				     THIS_MODULE, &d, adapter_nr) ||
 	    0 == dvb_usb_device_init(intf,
 				&cxusb_bluebird_nano2_needsfirmware_properties,
-				     THIS_MODULE, NULL, adapter_nr) ||
+				     THIS_MODULE, &d, adapter_nr) ||
 	    0 == dvb_usb_device_init(intf, &cxusb_aver_a868r_properties,
-				     THIS_MODULE, NULL, adapter_nr) ||
+				     THIS_MODULE, &d, adapter_nr) ||
 	    0 == dvb_usb_device_init(intf,
 				     &cxusb_bluebird_dualdig4_rev2_properties,
-				     THIS_MODULE, NULL, adapter_nr) ||
+				     THIS_MODULE, &d, adapter_nr) ||
 	    0 == dvb_usb_device_init(intf, &cxusb_d680_dmb_properties,
-				     THIS_MODULE, NULL, adapter_nr) ||
+				     THIS_MODULE, &d, adapter_nr) ||
 	    0 == dvb_usb_device_init(intf, &cxusb_mygica_d689_properties,
-				     THIS_MODULE, NULL, adapter_nr) ||
+				     THIS_MODULE, &d, adapter_nr) ||
 	    0 == dvb_usb_device_init(intf, &cxusb_mygica_t230_properties,
-				     THIS_MODULE, NULL, adapter_nr) ||
-	    0)
+				     THIS_MODULE, &d, adapter_nr) ||
+	    0) {
+		st = d->priv;
+		mutex_init(&st->data_mutex);
+
 		return 0;
+	}
 
 	return -EINVAL;
 }
diff --git a/drivers/media/usb/dvb-usb/cxusb.h b/drivers/media/usb/dvb-usb/cxusb.h
index 527ff79..9f3ee0e 100644
--- a/drivers/media/usb/dvb-usb/cxusb.h
+++ b/drivers/media/usb/dvb-usb/cxusb.h
@@ -28,10 +28,16 @@
 #define CMD_ANALOG        0x50
 #define CMD_DIGITAL       0x51
 
+/* Max transfer size done by I2C transfer functions */
+#define MAX_XFER_SIZE  80
+
 struct cxusb_state {
 	u8 gpio_write_state[3];
 	struct i2c_client *i2c_client_demod;
 	struct i2c_client *i2c_client_tuner;
+
+	unsigned char data[MAX_XFER_SIZE];
+	struct mutex data_mutex;
 };
 
 #endif
-- 
cgit v0.10.2


From bd1f976cc95b0689f889c8d93434ee61dd09b08b Mon Sep 17 00:00:00 2001
From: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Date: Fri, 7 Oct 2016 06:40:24 -0300
Subject: [media] dib0700: be sure that dib0700_ctrl_rd() users can do DMA

dib0700_ctrl_rd() takes a RX and a TX pointer. Be sure that
both will point to a memory allocated via kmalloc().

Reviewed-by: Patrick Boettcher <patrick.boettcher@posteo.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

diff --git a/drivers/media/usb/dvb-usb/dib0700_core.c b/drivers/media/usb/dvb-usb/dib0700_core.c
index f319665..515f89d 100644
--- a/drivers/media/usb/dvb-usb/dib0700_core.c
+++ b/drivers/media/usb/dvb-usb/dib0700_core.c
@@ -292,13 +292,15 @@ static int dib0700_i2c_xfer_legacy(struct i2c_adapter *adap,
 
 			/* special thing in the current firmware: when length is zero the read-failed */
 			len = dib0700_ctrl_rd(d, st->buf, msg[i].len + 2,
-					msg[i+1].buf, msg[i+1].len);
+					      st->buf, msg[i + 1].len);
 			if (len <= 0) {
 				deb_info("I2C read failed on address 0x%02x\n",
 						msg[i].addr);
 				break;
 			}
 
+			memcpy(msg[i + 1].buf, st->buf, msg[i + 1].len);
+
 			msg[i+1].len = len;
 
 			i++;
diff --git a/drivers/media/usb/dvb-usb/dib0700_devices.c b/drivers/media/usb/dvb-usb/dib0700_devices.c
index 0857b56..ef1b8ee 100644
--- a/drivers/media/usb/dvb-usb/dib0700_devices.c
+++ b/drivers/media/usb/dvb-usb/dib0700_devices.c
@@ -508,8 +508,6 @@ static int stk7700ph_tuner_attach(struct dvb_usb_adapter *adap)
 
 #define DEFAULT_RC_INTERVAL 50
 
-static u8 rc_request[] = { REQUEST_POLL_RC, 0 };
-
 /*
  * This function is used only when firmware is < 1.20 version. Newer
  * firmwares use bulk mode, with functions implemented at dib0700_core,
@@ -517,7 +515,6 @@ static u8 rc_request[] = { REQUEST_POLL_RC, 0 };
  */
 static int dib0700_rc_query_old_firmware(struct dvb_usb_device *d)
 {
-	u8 key[4];
 	enum rc_type protocol;
 	u32 scancode;
 	u8 toggle;
@@ -532,39 +529,43 @@ static int dib0700_rc_query_old_firmware(struct dvb_usb_device *d)
 		return 0;
 	}
 
-	i = dib0700_ctrl_rd(d, rc_request, 2, key, 4);
+	st->buf[0] = REQUEST_POLL_RC;
+	st->buf[1] = 0;
+
+	i = dib0700_ctrl_rd(d, st->buf, 2, st->buf, 4);
 	if (i <= 0) {
 		err("RC Query Failed");
-		return -1;
+		return -EIO;
 	}
 
 	/* losing half of KEY_0 events from Philipps rc5 remotes.. */
-	if (key[0] == 0 && key[1] == 0 && key[2] == 0 && key[3] == 0)
+	if (st->buf[0] == 0 && st->buf[1] == 0
+	    && st->buf[2] == 0 && st->buf[3] == 0)
 		return 0;
 
-	/* info("%d: %2X %2X %2X %2X",dvb_usb_dib0700_ir_proto,(int)key[3-2],(int)key[3-3],(int)key[3-1],(int)key[3]);  */
+	/* info("%d: %2X %2X %2X %2X",dvb_usb_dib0700_ir_proto,(int)st->buf[3 - 2],(int)st->buf[3 - 3],(int)st->buf[3 - 1],(int)st->buf[3]);  */
 
 	dib0700_rc_setup(d, NULL); /* reset ir sensor data to prevent false events */
 
 	switch (d->props.rc.core.protocol) {
 	case RC_BIT_NEC:
 		/* NEC protocol sends repeat code as 0 0 0 FF */
-		if ((key[3-2] == 0x00) && (key[3-3] == 0x00) &&
-		    (key[3] == 0xff)) {
+		if ((st->buf[3 - 2] == 0x00) && (st->buf[3 - 3] == 0x00) &&
+		    (st->buf[3] == 0xff)) {
 			rc_repeat(d->rc_dev);
 			return 0;
 		}
 
 		protocol = RC_TYPE_NEC;
-		scancode = RC_SCANCODE_NEC(key[3-2], key[3-3]);
+		scancode = RC_SCANCODE_NEC(st->buf[3 - 2], st->buf[3 - 3]);
 		toggle = 0;
 		break;
 
 	default:
 		/* RC-5 protocol changes toggle bit on new keypress */
 		protocol = RC_TYPE_RC5;
-		scancode = RC_SCANCODE_RC5(key[3-2], key[3-3]);
-		toggle = key[3-1];
+		scancode = RC_SCANCODE_RC5(st->buf[3 - 2], st->buf[3 - 3]);
+		toggle = st->buf[3 - 1];
 		break;
 	}
 
-- 
cgit v0.10.2


From fa1ecd8dc454fe2d3075a964240f45ceb60cb9e0 Mon Sep 17 00:00:00 2001
From: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Date: Fri, 7 Oct 2016 06:53:51 -0300
Subject: [media] dib0700_core: don't use stack on I2C reads

Be sure that I2C reads won't use stack by passing
a pointer to the state buffer, that we know it was
allocated via kmalloc, instead of relying on the buffer
allocated by an I2C client.

Reviewed-by: Patrick Boettcher <patrick.boettcher@posteo.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

diff --git a/drivers/media/usb/dvb-usb/dib0700_core.c b/drivers/media/usb/dvb-usb/dib0700_core.c
index 515f89d..92d5408 100644
--- a/drivers/media/usb/dvb-usb/dib0700_core.c
+++ b/drivers/media/usb/dvb-usb/dib0700_core.c
@@ -213,7 +213,7 @@ static int dib0700_i2c_xfer_new(struct i2c_adapter *adap, struct i2c_msg *msg,
 						 usb_rcvctrlpipe(d->udev, 0),
 						 REQUEST_NEW_I2C_READ,
 						 USB_TYPE_VENDOR | USB_DIR_IN,
-						 value, index, msg[i].buf,
+						 value, index, st->buf,
 						 msg[i].len,
 						 USB_CTRL_GET_TIMEOUT);
 			if (result < 0) {
@@ -221,6 +221,14 @@ static int dib0700_i2c_xfer_new(struct i2c_adapter *adap, struct i2c_msg *msg,
 				break;
 			}
 
+			if (msg[i].len > sizeof(st->buf)) {
+				deb_info("buffer too small to fit %d bytes\n",
+					 msg[i].len);
+				return -EIO;
+			}
+
+			memcpy(msg[i].buf, st->buf, msg[i].len);
+
 			deb_data("<<< ");
 			debug_dump(msg[i].buf, msg[i].len, deb_data);
 
@@ -238,6 +246,13 @@ static int dib0700_i2c_xfer_new(struct i2c_adapter *adap, struct i2c_msg *msg,
 			/* I2C ctrl + FE bus; */
 			st->buf[3] = ((gen_mode << 6) & 0xC0) |
 				 ((bus_mode << 4) & 0x30);
+
+			if (msg[i].len > sizeof(st->buf) - 4) {
+				deb_info("i2c message to big: %d\n",
+					 msg[i].len);
+				return -EIO;
+			}
+
 			/* The Actual i2c payload */
 			memcpy(&st->buf[4], msg[i].buf, msg[i].len);
 
@@ -283,6 +298,11 @@ static int dib0700_i2c_xfer_legacy(struct i2c_adapter *adap,
 		/* fill in the address */
 		st->buf[1] = msg[i].addr << 1;
 		/* fill the buffer */
+		if (msg[i].len > sizeof(st->buf) - 2) {
+			deb_info("i2c xfer to big: %d\n",
+				msg[i].len);
+			return -EIO;
+		}
 		memcpy(&st->buf[2], msg[i].buf, msg[i].len);
 
 		/* write/read request */
@@ -299,6 +319,11 @@ static int dib0700_i2c_xfer_legacy(struct i2c_adapter *adap,
 				break;
 			}
 
+			if (msg[i + 1].len > sizeof(st->buf)) {
+				deb_info("i2c xfer buffer to small for %d\n",
+					msg[i].len);
+				return -EIO;
+			}
 			memcpy(msg[i + 1].buf, st->buf, msg[i + 1].len);
 
 			msg[i+1].len = len;
-- 
cgit v0.10.2


From 426398b15d9f18ce3e7b5c4e657b4c0103dd8389 Mon Sep 17 00:00:00 2001
From: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Date: Fri, 7 Oct 2016 07:34:36 -0300
Subject: [media] dibusb: don't do DMA on stack

The USB control messages require DMA to work. We cannot pass
a stack-allocated buffer, as it is not warranted that the
stack would be into a DMA enabled area.

Reviewed-by: Patrick Boettcher <patrick.boettcher@posteo.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

diff --git a/drivers/media/usb/dvb-usb/dibusb-common.c b/drivers/media/usb/dvb-usb/dibusb-common.c
index 4b08c2a..951f3da 100644
--- a/drivers/media/usb/dvb-usb/dibusb-common.c
+++ b/drivers/media/usb/dvb-usb/dibusb-common.c
@@ -63,72 +63,117 @@ EXPORT_SYMBOL(dibusb_pid_filter_ctrl);
 
 int dibusb_power_ctrl(struct dvb_usb_device *d, int onoff)
 {
-	u8 b[3];
+	u8 *b;
 	int ret;
+
+	b = kmalloc(3, GFP_KERNEL);
+	if (!b)
+		return -ENOMEM;
+
 	b[0] = DIBUSB_REQ_SET_IOCTL;
 	b[1] = DIBUSB_IOCTL_CMD_POWER_MODE;
 	b[2] = onoff ? DIBUSB_IOCTL_POWER_WAKEUP : DIBUSB_IOCTL_POWER_SLEEP;
-	ret = dvb_usb_generic_write(d,b,3);
+
+	ret = dvb_usb_generic_write(d, b, 3);
+
+	kfree(b);
+
 	msleep(10);
+
 	return ret;
 }
 EXPORT_SYMBOL(dibusb_power_ctrl);
 
 int dibusb2_0_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff)
 {
-	u8 b[3] = { 0 };
 	int ret;
+	u8 *b;
+
+	b = kmalloc(3, GFP_KERNEL);
+	if (!b)
+		return -ENOMEM;
 
 	if ((ret = dibusb_streaming_ctrl(adap,onoff)) < 0)
-		return ret;
+		goto ret;
 
 	if (onoff) {
 		b[0] = DIBUSB_REQ_SET_STREAMING_MODE;
 		b[1] = 0x00;
-		if ((ret = dvb_usb_generic_write(adap->dev,b,2)) < 0)
-			return ret;
+		ret = dvb_usb_generic_write(adap->dev, b, 2);
+		if (ret  < 0)
+			goto ret;
 	}
 
 	b[0] = DIBUSB_REQ_SET_IOCTL;
 	b[1] = onoff ? DIBUSB_IOCTL_CMD_ENABLE_STREAM : DIBUSB_IOCTL_CMD_DISABLE_STREAM;
-	return dvb_usb_generic_write(adap->dev,b,3);
+	ret = dvb_usb_generic_write(adap->dev, b, 3);
+
+ret:
+	kfree(b);
+	return ret;
 }
 EXPORT_SYMBOL(dibusb2_0_streaming_ctrl);
 
 int dibusb2_0_power_ctrl(struct dvb_usb_device *d, int onoff)
 {
-	if (onoff) {
-		u8 b[3] = { DIBUSB_REQ_SET_IOCTL, DIBUSB_IOCTL_CMD_POWER_MODE, DIBUSB_IOCTL_POWER_WAKEUP };
-		return dvb_usb_generic_write(d,b,3);
-	} else
+	u8 *b;
+	int ret;
+
+	if (!onoff)
 		return 0;
+
+	b = kmalloc(3, GFP_KERNEL);
+	if (!b)
+		return -ENOMEM;
+
+	b[0] = DIBUSB_REQ_SET_IOCTL;
+	b[1] = DIBUSB_IOCTL_CMD_POWER_MODE;
+	b[2] = DIBUSB_IOCTL_POWER_WAKEUP;
+
+	ret = dvb_usb_generic_write(d, b, 3);
+
+	kfree(b);
+
+	return ret;
 }
 EXPORT_SYMBOL(dibusb2_0_power_ctrl);
 
 static int dibusb_i2c_msg(struct dvb_usb_device *d, u8 addr,
 			  u8 *wbuf, u16 wlen, u8 *rbuf, u16 rlen)
 {
-	u8 sndbuf[MAX_XFER_SIZE]; /* lead(1) devaddr,direction(1) addr(2) data(wlen) (len(2) (when reading)) */
+	u8 *sndbuf;
+	int ret, wo, len;
+
 	/* write only ? */
-	int wo = (rbuf == NULL || rlen == 0),
-		len = 2 + wlen + (wo ? 0 : 2);
+	wo = (rbuf == NULL || rlen == 0);
+
+	len = 2 + wlen + (wo ? 0 : 2);
 
-	if (4 + wlen > sizeof(sndbuf)) {
+	sndbuf = kmalloc(MAX_XFER_SIZE, GFP_KERNEL);
+	if (!sndbuf)
+		return -ENOMEM;
+
+	if (4 + wlen > MAX_XFER_SIZE) {
 		warn("i2c wr: len=%d is too big!\n", wlen);
-		return -EOPNOTSUPP;
+		ret = -EOPNOTSUPP;
+		goto ret;
 	}
 
 	sndbuf[0] = wo ? DIBUSB_REQ_I2C_WRITE : DIBUSB_REQ_I2C_READ;
 	sndbuf[1] = (addr << 1) | (wo ? 0 : 1);
 
-	memcpy(&sndbuf[2],wbuf,wlen);
+	memcpy(&sndbuf[2], wbuf, wlen);
 
 	if (!wo) {
-		sndbuf[wlen+2] = (rlen >> 8) & 0xff;
-		sndbuf[wlen+3] = rlen & 0xff;
+		sndbuf[wlen + 2] = (rlen >> 8) & 0xff;
+		sndbuf[wlen + 3] = rlen & 0xff;
 	}
 
-	return dvb_usb_generic_rw(d,sndbuf,len,rbuf,rlen,0);
+	ret = dvb_usb_generic_rw(d, sndbuf, len, rbuf, rlen, 0);
+
+ret:
+	kfree(sndbuf);
+	return ret;
 }
 
 /*
@@ -320,11 +365,23 @@ EXPORT_SYMBOL(rc_map_dibusb_table);
 
 int dibusb_rc_query(struct dvb_usb_device *d, u32 *event, int *state)
 {
-	u8 key[5],cmd = DIBUSB_REQ_POLL_REMOTE;
-	dvb_usb_generic_rw(d,&cmd,1,key,5,0);
-	dvb_usb_nec_rc_key_to_event(d,key,event,state);
-	if (key[0] != 0)
-		deb_info("key: %*ph\n", 5, key);
+	u8 *buf;
+
+	buf = kmalloc(5, GFP_KERNEL);
+	if (!buf)
+		return -ENOMEM;
+
+	buf[0] = DIBUSB_REQ_POLL_REMOTE;
+
+	dvb_usb_generic_rw(d, buf, 1, buf, 5, 0);
+
+	dvb_usb_nec_rc_key_to_event(d, buf, event, state);
+
+	if (buf[0] != 0)
+		deb_info("key: %*ph\n", 5, buf);
+
+	kfree(buf);
+
 	return 0;
 }
 EXPORT_SYMBOL(dibusb_rc_query);
diff --git a/drivers/media/usb/dvb-usb/dibusb.h b/drivers/media/usb/dvb-usb/dibusb.h
index 3f82163..697be2a 100644
--- a/drivers/media/usb/dvb-usb/dibusb.h
+++ b/drivers/media/usb/dvb-usb/dibusb.h
@@ -96,6 +96,9 @@
 #define DIBUSB_IOCTL_CMD_ENABLE_STREAM	0x01
 #define DIBUSB_IOCTL_CMD_DISABLE_STREAM	0x02
 
+/* Max transfer size done by I2C transfer functions */
+#define MAX_XFER_SIZE  64
+
 struct dibusb_state {
 	struct dib_fe_xfer_ops ops;
 	int mt2060_present;
-- 
cgit v0.10.2


From ff1c123545d706c6e414132c9fc93e345f5141da Mon Sep 17 00:00:00 2001
From: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Date: Fri, 7 Oct 2016 13:40:48 -0300
Subject: [media] dibusb: handle error code on RC query

There's no sense on decoding and generating a RC key code if
there was an error on the URB control message.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

diff --git a/drivers/media/usb/dvb-usb/dibusb-common.c b/drivers/media/usb/dvb-usb/dibusb-common.c
index 951f3da..b0fd9a6 100644
--- a/drivers/media/usb/dvb-usb/dibusb-common.c
+++ b/drivers/media/usb/dvb-usb/dibusb-common.c
@@ -366,6 +366,7 @@ EXPORT_SYMBOL(rc_map_dibusb_table);
 int dibusb_rc_query(struct dvb_usb_device *d, u32 *event, int *state)
 {
 	u8 *buf;
+	int ret;
 
 	buf = kmalloc(5, GFP_KERNEL);
 	if (!buf)
@@ -373,7 +374,9 @@ int dibusb_rc_query(struct dvb_usb_device *d, u32 *event, int *state)
 
 	buf[0] = DIBUSB_REQ_POLL_REMOTE;
 
-	dvb_usb_generic_rw(d, buf, 1, buf, 5, 0);
+	ret = dvb_usb_generic_rw(d, buf, 1, buf, 5, 0);
+	if (ret < 0)
+		goto ret;
 
 	dvb_usb_nec_rc_key_to_event(d, buf, event, state);
 
@@ -382,6 +385,7 @@ int dibusb_rc_query(struct dvb_usb_device *d, u32 *event, int *state)
 
 	kfree(buf);
 
-	return 0;
+ret:
+	return ret;
 }
 EXPORT_SYMBOL(dibusb_rc_query);
-- 
cgit v0.10.2


From f0b0ada7184cca44bb5ae96903eca304cc20eec5 Mon Sep 17 00:00:00 2001
From: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Date: Fri, 7 Oct 2016 07:55:38 -0300
Subject: [media] digitv: don't do DMA on stack

The USB control messages require DMA to work. We cannot pass
a stack-allocated buffer, as it is not warranted that the
stack would be into a DMA enabled area.

Reviewed-by: Patrick Boettcher <patrick.boettcher@posteo.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

diff --git a/drivers/media/usb/dvb-usb/digitv.c b/drivers/media/usb/dvb-usb/digitv.c
index 6313433..09f8c28b 100644
--- a/drivers/media/usb/dvb-usb/digitv.c
+++ b/drivers/media/usb/dvb-usb/digitv.c
@@ -28,20 +28,22 @@ DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
 static int digitv_ctrl_msg(struct dvb_usb_device *d,
 		u8 cmd, u8 vv, u8 *wbuf, int wlen, u8 *rbuf, int rlen)
 {
+	struct digitv_state *st = d->priv;
 	int wo = (rbuf == NULL || rlen == 0); /* write-only */
-	u8 sndbuf[7],rcvbuf[7];
-	memset(sndbuf,0,7); memset(rcvbuf,0,7);
 
-	sndbuf[0] = cmd;
-	sndbuf[1] = vv;
-	sndbuf[2] = wo ? wlen : rlen;
+	memset(st->sndbuf, 0, 7);
+	memset(st->rcvbuf, 0, 7);
+
+	st->sndbuf[0] = cmd;
+	st->sndbuf[1] = vv;
+	st->sndbuf[2] = wo ? wlen : rlen;
 
 	if (wo) {
-		memcpy(&sndbuf[3],wbuf,wlen);
-		dvb_usb_generic_write(d,sndbuf,7);
+		memcpy(&st->sndbuf[3], wbuf, wlen);
+		dvb_usb_generic_write(d, st->sndbuf, 7);
 	} else {
-		dvb_usb_generic_rw(d,sndbuf,7,rcvbuf,7,10);
-		memcpy(rbuf,&rcvbuf[3],rlen);
+		dvb_usb_generic_rw(d, st->sndbuf, 7, st->rcvbuf, 7, 10);
+		memcpy(rbuf, &st->rcvbuf[3], rlen);
 	}
 	return 0;
 }
diff --git a/drivers/media/usb/dvb-usb/digitv.h b/drivers/media/usb/dvb-usb/digitv.h
index 908c09f..581e09c 100644
--- a/drivers/media/usb/dvb-usb/digitv.h
+++ b/drivers/media/usb/dvb-usb/digitv.h
@@ -5,7 +5,10 @@
 #include "dvb-usb.h"
 
 struct digitv_state {
-    int is_nxt6000;
+	int is_nxt6000;
+
+	unsigned char sndbuf[7];
+	unsigned char rcvbuf[7];
 };
 
 /* protocol (from usblogging and the SDK:
-- 
cgit v0.10.2


From 208d8af509455ebf25f25f974c9907c0eb1a2b0a Mon Sep 17 00:00:00 2001
From: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Date: Mon, 10 Oct 2016 15:34:13 -0300
Subject: [media] dtt200u-fe: don't keep waiting for lock at set_frontend()

It is up to the frontend kthread to wait for lock.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

diff --git a/drivers/media/usb/dvb-usb/dtt200u-fe.c b/drivers/media/usb/dvb-usb/dtt200u-fe.c
index c09332b..9bb15f7 100644
--- a/drivers/media/usb/dvb-usb/dtt200u-fe.c
+++ b/drivers/media/usb/dvb-usb/dtt200u-fe.c
@@ -105,8 +105,6 @@ static int dtt200u_fe_set_frontend(struct dvb_frontend *fe)
 {
 	struct dtv_frontend_properties *fep = &fe->dtv_property_cache;
 	struct dtt200u_fe_state *state = fe->demodulator_priv;
-	int i;
-	enum fe_status st;
 	u16 freq = fep->frequency / 250000;
 	u8 bwbuf[2] = { SET_BANDWIDTH, 0 },freqbuf[3] = { SET_RF_FREQ, 0, 0 };
 
@@ -130,13 +128,6 @@ static int dtt200u_fe_set_frontend(struct dvb_frontend *fe)
 	freqbuf[2] = (freq >> 8) & 0xff;
 	dvb_usb_generic_write(state->d,freqbuf,3);
 
-	for (i = 0; i < 30; i++) {
-		msleep(20);
-		dtt200u_fe_read_status(fe, &st);
-		if (st & FE_TIMEDOUT)
-			continue;
-	}
-
 	return 0;
 }
 
-- 
cgit v0.10.2


From 89919b518863e7dac98d4d6d4b08ed2113d91d27 Mon Sep 17 00:00:00 2001
From: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Date: Fri, 7 Oct 2016 08:06:57 -0300
Subject: [media] dtt200u-fe: don't do DMA on stack

The USB control messages require DMA to work. We cannot pass
a stack-allocated buffer, as it is not warranted that the
stack would be into a DMA enabled area.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

diff --git a/drivers/media/usb/dvb-usb/dtt200u-fe.c b/drivers/media/usb/dvb-usb/dtt200u-fe.c
index 9bb15f7..7f7f64b 100644
--- a/drivers/media/usb/dvb-usb/dtt200u-fe.c
+++ b/drivers/media/usb/dvb-usb/dtt200u-fe.c
@@ -18,17 +18,22 @@ struct dtt200u_fe_state {
 
 	struct dtv_frontend_properties fep;
 	struct dvb_frontend frontend;
+
+	unsigned char data[80];
+	struct mutex data_mutex;
 };
 
 static int dtt200u_fe_read_status(struct dvb_frontend *fe,
 				  enum fe_status *stat)
 {
 	struct dtt200u_fe_state *state = fe->demodulator_priv;
-	u8 st = GET_TUNE_STATUS, b[3];
 
-	dvb_usb_generic_rw(state->d,&st,1,b,3,0);
+	mutex_lock(&state->data_mutex);
+	state->data[0] = GET_TUNE_STATUS;
+
+	dvb_usb_generic_rw(state->d, state->data, 1, state->data, 3, 0);
 
-	switch (b[0]) {
+	switch (state->data[0]) {
 		case 0x01:
 			*stat = FE_HAS_SIGNAL | FE_HAS_CARRIER |
 				FE_HAS_VITERBI | FE_HAS_SYNC | FE_HAS_LOCK;
@@ -41,51 +46,75 @@ static int dtt200u_fe_read_status(struct dvb_frontend *fe,
 			*stat = 0;
 			break;
 	}
+	mutex_unlock(&state->data_mutex);
 	return 0;
 }
 
 static int dtt200u_fe_read_ber(struct dvb_frontend* fe, u32 *ber)
 {
 	struct dtt200u_fe_state *state = fe->demodulator_priv;
-	u8 bw = GET_VIT_ERR_CNT,b[3];
-	dvb_usb_generic_rw(state->d,&bw,1,b,3,0);
-	*ber = (b[0] << 16) | (b[1] << 8) | b[2];
+
+	mutex_lock(&state->data_mutex);
+	state->data[0] = GET_VIT_ERR_CNT;
+
+	dvb_usb_generic_rw(state->d, state->data, 1, state->data, 3, 0);
+	*ber = (state->data[0] << 16) | (state->data[1] << 8) | state->data[2];
+
+	mutex_unlock(&state->data_mutex);
 	return 0;
 }
 
 static int dtt200u_fe_read_unc_blocks(struct dvb_frontend* fe, u32 *unc)
 {
 	struct dtt200u_fe_state *state = fe->demodulator_priv;
-	u8 bw = GET_RS_UNCOR_BLK_CNT,b[2];
 
-	dvb_usb_generic_rw(state->d,&bw,1,b,2,0);
-	*unc = (b[0] << 8) | b[1];
-	return 0;
+	mutex_lock(&state->data_mutex);
+	state->data[0] = GET_RS_UNCOR_BLK_CNT;
+
+	dvb_usb_generic_rw(state->d, state->data, 1, state->data, 2, 0);
+
+	mutex_unlock(&state->data_mutex);
+	return ret;
 }
 
 static int dtt200u_fe_read_signal_strength(struct dvb_frontend* fe, u16 *strength)
 {
 	struct dtt200u_fe_state *state = fe->demodulator_priv;
-	u8 bw = GET_AGC, b;
-	dvb_usb_generic_rw(state->d,&bw,1,&b,1,0);
-	*strength = (b << 8) | b;
-	return 0;
+
+	mutex_lock(&state->data_mutex);
+	state->data[0] = GET_AGC;
+
+	dvb_usb_generic_rw(state->d, state->data, 1, state->data, 1, 0);
+
+	mutex_unlock(&state->data_mutex);
+	return ret;
 }
 
 static int dtt200u_fe_read_snr(struct dvb_frontend* fe, u16 *snr)
 {
 	struct dtt200u_fe_state *state = fe->demodulator_priv;
-	u8 bw = GET_SNR,br;
-	dvb_usb_generic_rw(state->d,&bw,1,&br,1,0);
-	*snr = ~((br << 8) | br);
-	return 0;
+
+	mutex_lock(&state->data_mutex);
+	state->data[0] = GET_SNR;
+
+	dvb_usb_generic_rw(state->d, state->data, 1, state->data, 1, 0);
+
+	mutex_unlock(&state->data_mutex);
+	return ret;
 }
 
 static int dtt200u_fe_init(struct dvb_frontend* fe)
 {
 	struct dtt200u_fe_state *state = fe->demodulator_priv;
-	u8 b = SET_INIT;
-	return dvb_usb_generic_write(state->d,&b,1);
+	int ret;
+
+	mutex_lock(&state->data_mutex);
+	state->data[0] = SET_INIT;
+
+	ret = dvb_usb_generic_write(state->d, state->data, 1);
+	mutex_unlock(&state->data_mutex);
+
+	return ret;
 }
 
 static int dtt200u_fe_sleep(struct dvb_frontend* fe)
@@ -106,29 +135,34 @@ static int dtt200u_fe_set_frontend(struct dvb_frontend *fe)
 	struct dtv_frontend_properties *fep = &fe->dtv_property_cache;
 	struct dtt200u_fe_state *state = fe->demodulator_priv;
 	u16 freq = fep->frequency / 250000;
-	u8 bwbuf[2] = { SET_BANDWIDTH, 0 },freqbuf[3] = { SET_RF_FREQ, 0, 0 };
 
+	mutex_lock(&state->data_mutex);
+	state->data[0] = SET_BANDWIDTH;
 	switch (fep->bandwidth_hz) {
 	case 8000000:
-		bwbuf[1] = 8;
+		state->data[1] = 8;
 		break;
 	case 7000000:
-		bwbuf[1] = 7;
+		state->data[1] = 7;
 		break;
 	case 6000000:
-		bwbuf[1] = 6;
+		state->data[1] = 6;
 		break;
 	default:
-		return -EINVAL;
+		ret = -EINVAL;
+		goto ret;
 	}
 
-	dvb_usb_generic_write(state->d,bwbuf,2);
+	dvb_usb_generic_write(state->d, state->data, 2);
 
-	freqbuf[1] = freq & 0xff;
-	freqbuf[2] = (freq >> 8) & 0xff;
-	dvb_usb_generic_write(state->d,freqbuf,3);
+	state->data[0] = SET_RF_FREQ;
+	state->data[1] = freq & 0xff;
+	state->data[2] = (freq >> 8) & 0xff;
+	dvb_usb_generic_write(state->d, state->data, 3);
 
-	return 0;
+ret:
+	mutex_unlock(&state->data_mutex);
+	return ret;
 }
 
 static int dtt200u_fe_get_frontend(struct dvb_frontend* fe,
@@ -160,6 +194,7 @@ struct dvb_frontend* dtt200u_fe_attach(struct dvb_usb_device *d)
 	deb_info("attaching frontend dtt200u\n");
 
 	state->d = d;
+	mutex_init(&state->data_mutex);
 
 	memcpy(&state->frontend.ops,&dtt200u_fe_ops,sizeof(struct dvb_frontend_ops));
 	state->frontend.demodulator_priv = state;
-- 
cgit v0.10.2


From ba705a629ceee28f7ee4a5f977da52278b683eb0 Mon Sep 17 00:00:00 2001
From: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Date: Fri, 7 Oct 2016 13:44:09 -0300
Subject: [media] dtt200u-fe: handle errors on USB control messages

If something goes wrong, return an error code, instead of
assuming that everything went fine.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

diff --git a/drivers/media/usb/dvb-usb/dtt200u-fe.c b/drivers/media/usb/dvb-usb/dtt200u-fe.c
index 7f7f64b..f5c042b 100644
--- a/drivers/media/usb/dvb-usb/dtt200u-fe.c
+++ b/drivers/media/usb/dvb-usb/dtt200u-fe.c
@@ -27,11 +27,17 @@ static int dtt200u_fe_read_status(struct dvb_frontend *fe,
 				  enum fe_status *stat)
 {
 	struct dtt200u_fe_state *state = fe->demodulator_priv;
+	int ret;
 
 	mutex_lock(&state->data_mutex);
 	state->data[0] = GET_TUNE_STATUS;
 
-	dvb_usb_generic_rw(state->d, state->data, 1, state->data, 3, 0);
+	ret = dvb_usb_generic_rw(state->d, state->data, 1, state->data, 3, 0);
+	if (ret < 0) {
+		*stat = 0;
+		mutex_unlock(&state->data_mutex);
+		return ret;
+	}
 
 	switch (state->data[0]) {
 		case 0x01:
@@ -53,25 +59,30 @@ static int dtt200u_fe_read_status(struct dvb_frontend *fe,
 static int dtt200u_fe_read_ber(struct dvb_frontend* fe, u32 *ber)
 {
 	struct dtt200u_fe_state *state = fe->demodulator_priv;
+	int ret;
 
 	mutex_lock(&state->data_mutex);
 	state->data[0] = GET_VIT_ERR_CNT;
 
-	dvb_usb_generic_rw(state->d, state->data, 1, state->data, 3, 0);
-	*ber = (state->data[0] << 16) | (state->data[1] << 8) | state->data[2];
+	ret = dvb_usb_generic_rw(state->d, state->data, 1, state->data, 3, 0);
+	if (ret >= 0)
+		*ber = (state->data[0] << 16) | (state->data[1] << 8) | state->data[2];
 
 	mutex_unlock(&state->data_mutex);
-	return 0;
+	return ret;
 }
 
 static int dtt200u_fe_read_unc_blocks(struct dvb_frontend* fe, u32 *unc)
 {
 	struct dtt200u_fe_state *state = fe->demodulator_priv;
+	int ret;
 
 	mutex_lock(&state->data_mutex);
 	state->data[0] = GET_RS_UNCOR_BLK_CNT;
 
-	dvb_usb_generic_rw(state->d, state->data, 1, state->data, 2, 0);
+	ret = dvb_usb_generic_rw(state->d, state->data, 1, state->data, 2, 0);
+	if (ret >= 0)
+		*unc = (state->data[0] << 8) | state->data[1];
 
 	mutex_unlock(&state->data_mutex);
 	return ret;
@@ -80,11 +91,14 @@ static int dtt200u_fe_read_unc_blocks(struct dvb_frontend* fe, u32 *unc)
 static int dtt200u_fe_read_signal_strength(struct dvb_frontend* fe, u16 *strength)
 {
 	struct dtt200u_fe_state *state = fe->demodulator_priv;
+	int ret;
 
 	mutex_lock(&state->data_mutex);
 	state->data[0] = GET_AGC;
 
-	dvb_usb_generic_rw(state->d, state->data, 1, state->data, 1, 0);
+	ret = dvb_usb_generic_rw(state->d, state->data, 1, state->data, 1, 0);
+	if (ret >= 0)
+		*strength = (state->data[0] << 8) | state->data[0];
 
 	mutex_unlock(&state->data_mutex);
 	return ret;
@@ -93,11 +107,14 @@ static int dtt200u_fe_read_signal_strength(struct dvb_frontend* fe, u16 *strengt
 static int dtt200u_fe_read_snr(struct dvb_frontend* fe, u16 *snr)
 {
 	struct dtt200u_fe_state *state = fe->demodulator_priv;
+	int ret;
 
 	mutex_lock(&state->data_mutex);
 	state->data[0] = GET_SNR;
 
-	dvb_usb_generic_rw(state->d, state->data, 1, state->data, 1, 0);
+	ret = dvb_usb_generic_rw(state->d, state->data, 1, state->data, 1, 0);
+	if (ret >= 0)
+		*snr = ~((state->data[0] << 8) | state->data[0]);
 
 	mutex_unlock(&state->data_mutex);
 	return ret;
@@ -134,6 +151,7 @@ static int dtt200u_fe_set_frontend(struct dvb_frontend *fe)
 {
 	struct dtv_frontend_properties *fep = &fe->dtv_property_cache;
 	struct dtt200u_fe_state *state = fe->demodulator_priv;
+	int ret;
 	u16 freq = fep->frequency / 250000;
 
 	mutex_lock(&state->data_mutex);
@@ -153,12 +171,16 @@ static int dtt200u_fe_set_frontend(struct dvb_frontend *fe)
 		goto ret;
 	}
 
-	dvb_usb_generic_write(state->d, state->data, 2);
+	ret = dvb_usb_generic_write(state->d, state->data, 2);
+	if (ret < 0)
+		goto ret;
 
 	state->data[0] = SET_RF_FREQ;
 	state->data[1] = freq & 0xff;
 	state->data[2] = (freq >> 8) & 0xff;
-	dvb_usb_generic_write(state->d, state->data, 3);
+	ret = dvb_usb_generic_write(state->d, state->data, 3);
+	if (ret < 0)
+		goto ret;
 
 ret:
 	mutex_unlock(&state->data_mutex);
-- 
cgit v0.10.2


From ab883e2de3fc58c0af6070ea067a607a6310772b Mon Sep 17 00:00:00 2001
From: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Date: Fri, 7 Oct 2016 08:40:43 -0300
Subject: [media] dtt200u: don't do DMA on stack

The USB control messages require DMA to work. We cannot pass
a stack-allocated buffer, as it is not warranted that the
stack would be into a DMA enabled area.

Reviewed-by: Patrick Boettcher <patrick.boettcher@posteo.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

diff --git a/drivers/media/usb/dvb-usb/dtt200u.c b/drivers/media/usb/dvb-usb/dtt200u.c
index d2a01b5..7706938 100644
--- a/drivers/media/usb/dvb-usb/dtt200u.c
+++ b/drivers/media/usb/dvb-usb/dtt200u.c
@@ -20,74 +20,103 @@ MODULE_PARM_DESC(debug, "set debugging level (1=info,xfer=2 (or-able))." DVB_USB
 
 DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
 
+struct dtt200u_state {
+	unsigned char data[80];
+	struct mutex data_mutex;
+};
+
 static int dtt200u_power_ctrl(struct dvb_usb_device *d, int onoff)
 {
-	u8 b = SET_INIT;
+	struct dtt200u_state *st = d->priv;
+
+	mutex_lock(&st->data_mutex);
+
+	st->data[0] = SET_INIT;
 
 	if (onoff)
-		dvb_usb_generic_write(d,&b,2);
+		dvb_usb_generic_write(d, st->data, 2);
 
+	mutex_unlock(&st->data_mutex);
 	return 0;
 }
 
 static int dtt200u_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff)
 {
-	u8 b_streaming[2] = { SET_STREAMING, onoff };
-	u8 b_rst_pid = RESET_PID_FILTER;
+	struct dtt200u_state *st = adap->dev->priv;
+
+	mutex_lock(&st->data_mutex);
+	st->data[0] = SET_STREAMING;
+	st->data[1] = onoff;
 
-	dvb_usb_generic_write(adap->dev, b_streaming, 2);
+	dvb_usb_generic_write(adap->dev, st->data, 2);
+
+	if (onoff)
+		return 0;
+
+	st->data[0] = RESET_PID_FILTER;
+	dvb_usb_generic_write(adap->dev, st->data, 1);
+
+	mutex_unlock(&st->data_mutex);
 
-	if (onoff == 0)
-		dvb_usb_generic_write(adap->dev, &b_rst_pid, 1);
 	return 0;
 }
 
 static int dtt200u_pid_filter(struct dvb_usb_adapter *adap, int index, u16 pid, int onoff)
 {
-	u8 b_pid[4];
+	struct dtt200u_state *st = adap->dev->priv;
+	int ret;
+
 	pid = onoff ? pid : 0;
 
-	b_pid[0] = SET_PID_FILTER;
-	b_pid[1] = index;
-	b_pid[2] = pid & 0xff;
-	b_pid[3] = (pid >> 8) & 0x1f;
+	mutex_lock(&st->data_mutex);
+	st->data[0] = SET_PID_FILTER;
+	st->data[1] = index;
+	st->data[2] = pid & 0xff;
+	st->data[3] = (pid >> 8) & 0x1f;
 
-	return dvb_usb_generic_write(adap->dev, b_pid, 4);
+	ret = dvb_usb_generic_write(adap->dev, st->data, 4);
+	mutex_unlock(&st->data_mutex);
+
+	return ret;
 }
 
 static int dtt200u_rc_query(struct dvb_usb_device *d)
 {
-	u8 key[5],cmd = GET_RC_CODE;
+	struct dtt200u_state *st = d->priv;
 	u32 scancode;
 
-	dvb_usb_generic_rw(d,&cmd,1,key,5,0);
-	if (key[0] == 1) {
+	mutex_lock(&st->data_mutex);
+	st->data[0] = GET_RC_CODE;
+
+	dvb_usb_generic_rw(d, st->data, 1, st->data, 5, 0);
+	if (st->data[0] == 1) {
 		enum rc_type proto = RC_TYPE_NEC;
 
-		scancode = key[1];
-		if ((u8) ~key[1] != key[2]) {
+		scancode = st->data[1];
+		if ((u8) ~st->data[1] != st->data[2]) {
 			/* Extended NEC */
 			scancode = scancode << 8;
-			scancode |= key[2];
+			scancode |= st->data[2];
 			proto = RC_TYPE_NECX;
 		}
 		scancode = scancode << 8;
-		scancode |= key[3];
+		scancode |= st->data[3];
 
 		/* Check command checksum is ok */
-		if ((u8) ~key[3] == key[4])
+		if ((u8) ~st->data[3] == st->data[4])
 			rc_keydown(d->rc_dev, proto, scancode, 0);
 		else
 			rc_keyup(d->rc_dev);
-	} else if (key[0] == 2) {
+	} else if (st->data[0] == 2) {
 		rc_repeat(d->rc_dev);
 	} else {
 		rc_keyup(d->rc_dev);
 	}
 
-	if (key[0] != 0)
-		deb_info("key: %*ph\n", 5, key);
+	if (st->data[0] != 0)
+		deb_info("st->data: %*ph\n", 5, st->data);
 
+	mutex_unlock(&st->data_mutex);
 	return 0;
 }
 
@@ -106,17 +135,24 @@ static struct dvb_usb_device_properties wt220u_miglia_properties;
 static int dtt200u_usb_probe(struct usb_interface *intf,
 		const struct usb_device_id *id)
 {
+	struct dvb_usb_device *d;
+	struct dtt200u_state *st;
+
 	if (0 == dvb_usb_device_init(intf, &dtt200u_properties,
-				     THIS_MODULE, NULL, adapter_nr) ||
+				     THIS_MODULE, &d, adapter_nr) ||
 	    0 == dvb_usb_device_init(intf, &wt220u_properties,
-				     THIS_MODULE, NULL, adapter_nr) ||
+				     THIS_MODULE, &d, adapter_nr) ||
 	    0 == dvb_usb_device_init(intf, &wt220u_fc_properties,
-				     THIS_MODULE, NULL, adapter_nr) ||
+				     THIS_MODULE, &d, adapter_nr) ||
 	    0 == dvb_usb_device_init(intf, &wt220u_zl0353_properties,
-				     THIS_MODULE, NULL, adapter_nr) ||
+				     THIS_MODULE, &d, adapter_nr) ||
 	    0 == dvb_usb_device_init(intf, &wt220u_miglia_properties,
-				     THIS_MODULE, NULL, adapter_nr))
+				     THIS_MODULE, &d, adapter_nr)) {
+		st = d->priv;
+		mutex_init(&st->data_mutex);
+
 		return 0;
+	}
 
 	return -ENODEV;
 }
@@ -140,6 +176,8 @@ static struct dvb_usb_device_properties dtt200u_properties = {
 	.usb_ctrl = CYPRESS_FX2,
 	.firmware = "dvb-usb-dtt200u-01.fw",
 
+	.size_of_priv     = sizeof(struct dtt200u_state),
+
 	.num_adapters = 1,
 	.adapter = {
 		{
@@ -190,6 +228,8 @@ static struct dvb_usb_device_properties wt220u_properties = {
 	.usb_ctrl = CYPRESS_FX2,
 	.firmware = "dvb-usb-wt220u-02.fw",
 
+	.size_of_priv     = sizeof(struct dtt200u_state),
+
 	.num_adapters = 1,
 	.adapter = {
 		{
@@ -240,6 +280,8 @@ static struct dvb_usb_device_properties wt220u_fc_properties = {
 	.usb_ctrl = CYPRESS_FX2,
 	.firmware = "dvb-usb-wt220u-fc03.fw",
 
+	.size_of_priv     = sizeof(struct dtt200u_state),
+
 	.num_adapters = 1,
 	.adapter = {
 		{
@@ -290,6 +332,8 @@ static struct dvb_usb_device_properties wt220u_zl0353_properties = {
 	.usb_ctrl = CYPRESS_FX2,
 	.firmware = "dvb-usb-wt220u-zl0353-01.fw",
 
+	.size_of_priv     = sizeof(struct dtt200u_state),
+
 	.num_adapters = 1,
 	.adapter = {
 		{
@@ -340,6 +384,8 @@ static struct dvb_usb_device_properties wt220u_miglia_properties = {
 	.usb_ctrl = CYPRESS_FX2,
 	.firmware = "dvb-usb-wt220u-miglia-01.fw",
 
+	.size_of_priv     = sizeof(struct dtt200u_state),
+
 	.num_adapters = 1,
 	.generic_bulk_ctrl_endpoint = 0x01,
 
-- 
cgit v0.10.2


From a3f9f07e06ebf37261171e167e2110b758c2a147 Mon Sep 17 00:00:00 2001
From: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Date: Fri, 7 Oct 2016 13:37:50 -0300
Subject: [media] dtt200u: handle USB control message errors

If something bad happens while an USB control message is
transfered, return an error code.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

diff --git a/drivers/media/usb/dvb-usb/dtt200u.c b/drivers/media/usb/dvb-usb/dtt200u.c
index 7706938..f88572c 100644
--- a/drivers/media/usb/dvb-usb/dtt200u.c
+++ b/drivers/media/usb/dvb-usb/dtt200u.c
@@ -28,37 +28,42 @@ struct dtt200u_state {
 static int dtt200u_power_ctrl(struct dvb_usb_device *d, int onoff)
 {
 	struct dtt200u_state *st = d->priv;
+	int ret = 0;
 
 	mutex_lock(&st->data_mutex);
 
 	st->data[0] = SET_INIT;
 
 	if (onoff)
-		dvb_usb_generic_write(d, st->data, 2);
+		ret = dvb_usb_generic_write(d, st->data, 2);
 
 	mutex_unlock(&st->data_mutex);
-	return 0;
+	return ret;
 }
 
 static int dtt200u_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff)
 {
 	struct dtt200u_state *st = adap->dev->priv;
+	int ret;
 
 	mutex_lock(&st->data_mutex);
 	st->data[0] = SET_STREAMING;
 	st->data[1] = onoff;
 
-	dvb_usb_generic_write(adap->dev, st->data, 2);
+	ret = dvb_usb_generic_write(adap->dev, st->data, 2);
+	if (ret < 0)
+		goto ret;
 
 	if (onoff)
-		return 0;
+		goto ret;
 
 	st->data[0] = RESET_PID_FILTER;
-	dvb_usb_generic_write(adap->dev, st->data, 1);
+	ret = dvb_usb_generic_write(adap->dev, st->data, 1);
 
+ret:
 	mutex_unlock(&st->data_mutex);
 
-	return 0;
+	return ret;
 }
 
 static int dtt200u_pid_filter(struct dvb_usb_adapter *adap, int index, u16 pid, int onoff)
@@ -84,11 +89,15 @@ static int dtt200u_rc_query(struct dvb_usb_device *d)
 {
 	struct dtt200u_state *st = d->priv;
 	u32 scancode;
+	int ret;
 
 	mutex_lock(&st->data_mutex);
 	st->data[0] = GET_RC_CODE;
 
-	dvb_usb_generic_rw(d, st->data, 1, st->data, 5, 0);
+	ret = dvb_usb_generic_rw(d, st->data, 1, st->data, 5, 0);
+	if (ret < 0)
+		goto ret;
+
 	if (st->data[0] == 1) {
 		enum rc_type proto = RC_TYPE_NEC;
 
@@ -116,8 +125,9 @@ static int dtt200u_rc_query(struct dvb_usb_device *d)
 	if (st->data[0] != 0)
 		deb_info("st->data: %*ph\n", 5, st->data);
 
+ret:
 	mutex_unlock(&st->data_mutex);
-	return 0;
+	return ret;
 }
 
 static int dtt200u_frontend_attach(struct dvb_usb_adapter *adap)
-- 
cgit v0.10.2


From 8f306145df334e2797ef5aa63225cd5178e569c1 Mon Sep 17 00:00:00 2001
From: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Date: Fri, 7 Oct 2016 08:51:23 -0300
Subject: [media] dtv5100: don't do DMA on stack

The USB control messages require DMA to work. We cannot pass
a stack-allocated buffer, as it is not warranted that the
stack would be into a DMA enabled area.

Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

diff --git a/drivers/media/usb/dvb-usb/dtv5100.c b/drivers/media/usb/dvb-usb/dtv5100.c
index 3d11df4..c60fb54 100644
--- a/drivers/media/usb/dvb-usb/dtv5100.c
+++ b/drivers/media/usb/dvb-usb/dtv5100.c
@@ -31,9 +31,14 @@ module_param_named(debug, dvb_usb_dtv5100_debug, int, 0644);
 MODULE_PARM_DESC(debug, "set debugging level" DVB_USB_DEBUG_STATUS);
 DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
 
+struct dtv5100_state {
+	unsigned char data[80];
+};
+
 static int dtv5100_i2c_msg(struct dvb_usb_device *d, u8 addr,
 			   u8 *wbuf, u16 wlen, u8 *rbuf, u16 rlen)
 {
+	struct dtv5100_state *st = d->priv;
 	u8 request;
 	u8 type;
 	u16 value;
@@ -60,9 +65,10 @@ static int dtv5100_i2c_msg(struct dvb_usb_device *d, u8 addr,
 	}
 	index = (addr << 8) + wbuf[0];
 
+	memcpy(st->data, rbuf, rlen);
 	msleep(1); /* avoid I2C errors */
 	return usb_control_msg(d->udev, usb_rcvctrlpipe(d->udev, 0), request,
-			       type, value, index, rbuf, rlen,
+			       type, value, index, st->data, rlen,
 			       DTV5100_USB_TIMEOUT);
 }
 
@@ -176,7 +182,7 @@ static struct dvb_usb_device_properties dtv5100_properties = {
 	.caps = DVB_USB_IS_AN_I2C_ADAPTER,
 	.usb_ctrl = DEVICE_SPECIFIC,
 
-	.size_of_priv = 0,
+	.size_of_priv = sizeof(struct dtv5100_state),
 
 	.num_adapters = 1,
 	.adapter = {{
-- 
cgit v0.10.2


From fa86c9a1fca5a50563cc63e97aa130a3c54f1d4c Mon Sep 17 00:00:00 2001
From: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Date: Fri, 7 Oct 2016 11:24:21 -0300
Subject: [media] gp8psk: don't do DMA on stack

The USB control messages require DMA to work. We cannot pass
a stack-allocated buffer, as it is not warranted that the
stack would be into a DMA enabled area.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

diff --git a/drivers/media/usb/dvb-usb/gp8psk.c b/drivers/media/usb/dvb-usb/gp8psk.c
index 5d0384d..807f562 100644
--- a/drivers/media/usb/dvb-usb/gp8psk.c
+++ b/drivers/media/usb/dvb-usb/gp8psk.c
@@ -24,6 +24,10 @@ MODULE_PARM_DESC(debug, "set debugging level (1=info,xfer=2,rc=4 (or-able))." DV
 
 DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
 
+struct gp8psk_state {
+	unsigned char data[80];
+};
+
 static int gp8psk_get_fw_version(struct dvb_usb_device *d, u8 *fw_vers)
 {
 	return (gp8psk_usb_in_op(d, GET_FW_VERS, 0, 0, fw_vers, 6));
@@ -53,17 +57,19 @@ static void gp8psk_info(struct dvb_usb_device *d)
 
 int gp8psk_usb_in_op(struct dvb_usb_device *d, u8 req, u16 value, u16 index, u8 *b, int blen)
 {
+	struct gp8psk_state *st = d->priv;
 	int ret = 0,try = 0;
 
 	if ((ret = mutex_lock_interruptible(&d->usb_mutex)))
 		return ret;
 
 	while (ret >= 0 && ret != blen && try < 3) {
+		memcpy(st->data, b, blen);
 		ret = usb_control_msg(d->udev,
 			usb_rcvctrlpipe(d->udev,0),
 			req,
 			USB_TYPE_VENDOR | USB_DIR_IN,
-			value,index,b,blen,
+			value, index, st->data, blen,
 			2000);
 		deb_info("reading number %d (ret: %d)\n",try,ret);
 		try++;
@@ -86,6 +92,7 @@ int gp8psk_usb_in_op(struct dvb_usb_device *d, u8 req, u16 value, u16 index, u8
 int gp8psk_usb_out_op(struct dvb_usb_device *d, u8 req, u16 value,
 			     u16 index, u8 *b, int blen)
 {
+	struct gp8psk_state *st = d->priv;
 	int ret;
 
 	deb_xfer("out: req. %x, val: %x, ind: %x, buffer: ",req,value,index);
@@ -94,11 +101,12 @@ int gp8psk_usb_out_op(struct dvb_usb_device *d, u8 req, u16 value,
 	if ((ret = mutex_lock_interruptible(&d->usb_mutex)))
 		return ret;
 
+	memcpy(st->data, b, blen);
 	if (usb_control_msg(d->udev,
 			usb_sndctrlpipe(d->udev,0),
 			req,
 			USB_TYPE_VENDOR | USB_DIR_OUT,
-			value,index,b,blen,
+			value, index, st->data, blen,
 			2000) != blen) {
 		warn("usb out operation failed.");
 		ret = -EIO;
@@ -265,6 +273,8 @@ static struct dvb_usb_device_properties gp8psk_properties = {
 	.usb_ctrl = CYPRESS_FX2,
 	.firmware = "dvb-usb-gp8psk-01.fw",
 
+	.size_of_priv = sizeof(struct gp8psk_state),
+
 	.num_adapters = 1,
 	.adapter = {
 		{
-- 
cgit v0.10.2


From f1a503dddf4d4da2b7bbf6ae4e92527bdc265bb9 Mon Sep 17 00:00:00 2001
From: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Date: Fri, 7 Oct 2016 14:12:48 -0300
Subject: [media] gp8psk: don't go past the buffer size

Add checks to avoid going out of the buffer.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

diff --git a/drivers/media/usb/dvb-usb/gp8psk.c b/drivers/media/usb/dvb-usb/gp8psk.c
index 807f562..adfd764 100644
--- a/drivers/media/usb/dvb-usb/gp8psk.c
+++ b/drivers/media/usb/dvb-usb/gp8psk.c
@@ -60,6 +60,9 @@ int gp8psk_usb_in_op(struct dvb_usb_device *d, u8 req, u16 value, u16 index, u8
 	struct gp8psk_state *st = d->priv;
 	int ret = 0,try = 0;
 
+	if (blen > sizeof(st->data))
+		return -EIO;
+
 	if ((ret = mutex_lock_interruptible(&d->usb_mutex)))
 		return ret;
 
@@ -98,6 +101,9 @@ int gp8psk_usb_out_op(struct dvb_usb_device *d, u8 req, u16 value,
 	deb_xfer("out: req. %x, val: %x, ind: %x, buffer: ",req,value,index);
 	debug_dump(b,blen,deb_xfer);
 
+	if (blen > sizeof(st->data))
+		return -EIO;
+
 	if ((ret = mutex_lock_interruptible(&d->usb_mutex)))
 		return ret;
 
@@ -151,6 +157,11 @@ static int gp8psk_load_bcm4500fw(struct dvb_usb_device *d)
 			err("failed to load bcm4500 firmware.");
 			goto out_free;
 		}
+		if (buflen > 64) {
+			err("firmare chunk size bigger than 64 bytes.");
+			goto out_free;
+		}
+
 		memcpy(buf, ptr, buflen);
 		if (dvb_usb_generic_write(d, buf, buflen)) {
 			err("failed to load bcm4500 firmware.");
-- 
cgit v0.10.2


From c3a66e9f465e7e792dff6ccd571bc657e6504c7b Mon Sep 17 00:00:00 2001
From: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Date: Fri, 7 Oct 2016 11:38:46 -0300
Subject: [media] nova-t-usb2: don't do DMA on stack

The USB control messages require DMA to work. We cannot pass
a stack-allocated buffer, as it is not warranted that the
stack would be into a DMA enabled area.

Reviewed-by: Patrick Boettcher <patrick.boettcher@posteo.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

diff --git a/drivers/media/usb/dvb-usb/nova-t-usb2.c b/drivers/media/usb/dvb-usb/nova-t-usb2.c
index fc7569e..26d7188 100644
--- a/drivers/media/usb/dvb-usb/nova-t-usb2.c
+++ b/drivers/media/usb/dvb-usb/nova-t-usb2.c
@@ -74,22 +74,29 @@ static struct rc_map_table rc_map_haupp_table[] = {
  */
 static int nova_t_rc_query(struct dvb_usb_device *d, u32 *event, int *state)
 {
-	u8 key[5],cmd[2] = { DIBUSB_REQ_POLL_REMOTE, 0x35 }, data,toggle,custom;
+	u8 *buf, data, toggle, custom;
 	u16 raw;
 	int i;
 	struct dibusb_device_state *st = d->priv;
 
-	dvb_usb_generic_rw(d,cmd,2,key,5,0);
+	buf = kmalloc(5, GFP_KERNEL);
+	if (!buf)
+		return -ENOMEM;
+
+	buf[0] = DIBUSB_REQ_POLL_REMOTE;
+	buf[1] = 0x35;
+	dvb_usb_generic_rw(d, buf, 2, buf, 5, 0);
 
 	*state = REMOTE_NO_KEY_PRESSED;
-	switch (key[0]) {
+	switch (buf[0]) {
 		case DIBUSB_RC_HAUPPAUGE_KEY_PRESSED:
-			raw = ((key[1] << 8) | key[2]) >> 3;
+			raw = ((buf[1] << 8) | buf[2]) >> 3;
 			toggle = !!(raw & 0x800);
 			data = raw & 0x3f;
 			custom = (raw >> 6) & 0x1f;
 
-			deb_rc("raw key code 0x%02x, 0x%02x, 0x%02x to c: %02x d: %02x toggle: %d\n",key[1],key[2],key[3],custom,data,toggle);
+			deb_rc("raw key code 0x%02x, 0x%02x, 0x%02x to c: %02x d: %02x toggle: %d\n",
+			       buf[1], buf[2], buf[3], custom, data, toggle);
 
 			for (i = 0; i < ARRAY_SIZE(rc_map_haupp_table); i++) {
 				if (rc5_data(&rc_map_haupp_table[i]) == data &&
@@ -117,6 +124,7 @@ static int nova_t_rc_query(struct dvb_usb_device *d, u32 *event, int *state)
 			break;
 	}
 
+	kfree(buf);
 	return 0;
 }
 
-- 
cgit v0.10.2


From 73d5c5c864f4094e86708760fd4612fbf1e6e76c Mon Sep 17 00:00:00 2001
From: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Date: Fri, 7 Oct 2016 11:59:44 -0300
Subject: [media] pctv452e: don't do DMA on stack

The USB control messages require DMA to work. We cannot pass
a stack-allocated buffer, as it is not warranted that the
stack would be into a DMA enabled area.

Reviewed-by: Patrick Boettcher <patrick.boettcher@posteo.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

diff --git a/drivers/media/usb/dvb-usb/pctv452e.c b/drivers/media/usb/dvb-usb/pctv452e.c
index c05de1b..58b6850 100644
--- a/drivers/media/usb/dvb-usb/pctv452e.c
+++ b/drivers/media/usb/dvb-usb/pctv452e.c
@@ -97,13 +97,14 @@ struct pctv452e_state {
 	u8 c;	   /* transaction counter, wraps around...  */
 	u8 initialized; /* set to 1 if 0x15 has been sent */
 	u16 last_rc_key;
+
+	unsigned char data[80];
 };
 
 static int tt3650_ci_msg(struct dvb_usb_device *d, u8 cmd, u8 *data,
 			 unsigned int write_len, unsigned int read_len)
 {
 	struct pctv452e_state *state = (struct pctv452e_state *)d->priv;
-	u8 buf[64];
 	u8 id;
 	unsigned int rlen;
 	int ret;
@@ -112,33 +113,36 @@ static int tt3650_ci_msg(struct dvb_usb_device *d, u8 cmd, u8 *data,
 	BUG_ON(write_len > 64 - 4);
 	BUG_ON(read_len > 64 - 4);
 
+	mutex_lock(&state->ca_mutex);
 	id = state->c++;
 
-	buf[0] = SYNC_BYTE_OUT;
-	buf[1] = id;
-	buf[2] = cmd;
-	buf[3] = write_len;
+	state->data[0] = SYNC_BYTE_OUT;
+	state->data[1] = id;
+	state->data[2] = cmd;
+	state->data[3] = write_len;
 
-	memcpy(buf + 4, data, write_len);
+	memcpy(state->data + 4, data, write_len);
 
 	rlen = (read_len > 0) ? 64 : 0;
-	ret = dvb_usb_generic_rw(d, buf, 4 + write_len,
-				  buf, rlen, /* delay_ms */ 0);
+	ret = dvb_usb_generic_rw(d, state->data, 4 + write_len,
+				  state->data, rlen, /* delay_ms */ 0);
 	if (0 != ret)
 		goto failed;
 
 	ret = -EIO;
-	if (SYNC_BYTE_IN != buf[0] || id != buf[1])
+	if (SYNC_BYTE_IN != state->data[0] || id != state->data[1])
 		goto failed;
 
-	memcpy(data, buf + 4, read_len);
+	memcpy(data, state->data + 4, read_len);
 
+	mutex_unlock(&state->ca_mutex);
 	return 0;
 
 failed:
 	err("CI error %d; %02X %02X %02X -> %*ph.",
-	     ret, SYNC_BYTE_OUT, id, cmd, 3, buf);
+	     ret, SYNC_BYTE_OUT, id, cmd, 3, state->data);
 
+	mutex_unlock(&state->ca_mutex);
 	return ret;
 }
 
@@ -405,52 +409,53 @@ static int pctv452e_i2c_msg(struct dvb_usb_device *d, u8 addr,
 				u8 *rcv_buf, u8 rcv_len)
 {
 	struct pctv452e_state *state = (struct pctv452e_state *)d->priv;
-	u8 buf[64];
 	u8 id;
 	int ret;
 
+	mutex_lock(&state->ca_mutex);
 	id = state->c++;
 
 	ret = -EINVAL;
 	if (snd_len > 64 - 7 || rcv_len > 64 - 7)
 		goto failed;
 
-	buf[0] = SYNC_BYTE_OUT;
-	buf[1] = id;
-	buf[2] = PCTV_CMD_I2C;
-	buf[3] = snd_len + 3;
-	buf[4] = addr << 1;
-	buf[5] = snd_len;
-	buf[6] = rcv_len;
+	state->data[0] = SYNC_BYTE_OUT;
+	state->data[1] = id;
+	state->data[2] = PCTV_CMD_I2C;
+	state->data[3] = snd_len + 3;
+	state->data[4] = addr << 1;
+	state->data[5] = snd_len;
+	state->data[6] = rcv_len;
 
-	memcpy(buf + 7, snd_buf, snd_len);
+	memcpy(state->data + 7, snd_buf, snd_len);
 
-	ret = dvb_usb_generic_rw(d, buf, 7 + snd_len,
-				  buf, /* rcv_len */ 64,
+	ret = dvb_usb_generic_rw(d, state->data, 7 + snd_len,
+				  state->data, /* rcv_len */ 64,
 				  /* delay_ms */ 0);
 	if (ret < 0)
 		goto failed;
 
 	/* TT USB protocol error. */
 	ret = -EIO;
-	if (SYNC_BYTE_IN != buf[0] || id != buf[1])
+	if (SYNC_BYTE_IN != state->data[0] || id != state->data[1])
 		goto failed;
 
 	/* I2C device didn't respond as expected. */
 	ret = -EREMOTEIO;
-	if (buf[5] < snd_len || buf[6] < rcv_len)
+	if (state->data[5] < snd_len || state->data[6] < rcv_len)
 		goto failed;
 
-	memcpy(rcv_buf, buf + 7, rcv_len);
+	memcpy(rcv_buf, state->data + 7, rcv_len);
+	mutex_unlock(&state->ca_mutex);
 
 	return rcv_len;
 
 failed:
-	err("I2C error %d; %02X %02X  %02X %02X %02X -> "
-	     "%02X %02X  %02X %02X %02X.",
+	err("I2C error %d; %02X %02X  %02X %02X %02X -> %*ph",
 	     ret, SYNC_BYTE_OUT, id, addr << 1, snd_len, rcv_len,
-	     buf[0], buf[1], buf[4], buf[5], buf[6]);
+	     7, state->data);
 
+	mutex_unlock(&state->ca_mutex);
 	return ret;
 }
 
@@ -499,8 +504,7 @@ static u32 pctv452e_i2c_func(struct i2c_adapter *adapter)
 static int pctv452e_power_ctrl(struct dvb_usb_device *d, int i)
 {
 	struct pctv452e_state *state = (struct pctv452e_state *)d->priv;
-	u8 b0[] = { 0xaa, 0, PCTV_CMD_RESET, 1, 0 };
-	u8 rx[PCTV_ANSWER_LEN];
+	u8 *rx;
 	int ret;
 
 	info("%s: %d\n", __func__, i);
@@ -511,6 +515,11 @@ static int pctv452e_power_ctrl(struct dvb_usb_device *d, int i)
 	if (state->initialized)
 		return 0;
 
+	rx = kmalloc(PCTV_ANSWER_LEN, GFP_KERNEL);
+	if (!rx)
+		return -ENOMEM;
+
+	mutex_lock(&state->ca_mutex);
 	/* hmm where shoud this should go? */
 	ret = usb_set_interface(d->udev, 0, ISOC_INTERFACE_ALTERNATIVE);
 	if (ret != 0)
@@ -518,65 +527,75 @@ static int pctv452e_power_ctrl(struct dvb_usb_device *d, int i)
 			__func__, ret);
 
 	/* this is a one-time initialization, dont know where to put */
-	b0[1] = state->c++;
+	state->data[0] = 0xaa;
+	state->data[1] = state->c++;
+	state->data[2] = PCTV_CMD_RESET;
+	state->data[3] = 1;
+	state->data[4] = 0;
 	/* reset board */
-	ret = dvb_usb_generic_rw(d, b0, sizeof(b0), rx, PCTV_ANSWER_LEN, 0);
+	ret = dvb_usb_generic_rw(d, state->data, 5, rx, PCTV_ANSWER_LEN, 0);
 	if (ret)
-		return ret;
+		goto ret;
 
-	b0[1] = state->c++;
-	b0[4] = 1;
+	state->data[1] = state->c++;
+	state->data[4] = 1;
 	/* reset board (again?) */
-	ret = dvb_usb_generic_rw(d, b0, sizeof(b0), rx, PCTV_ANSWER_LEN, 0);
+	ret = dvb_usb_generic_rw(d, state->data, 5, rx, PCTV_ANSWER_LEN, 0);
 	if (ret)
-		return ret;
+		goto ret;
 
 	state->initialized = 1;
 
-	return 0;
+ret:
+	mutex_unlock(&state->ca_mutex);
+	kfree(rx);
+	return ret;
 }
 
 static int pctv452e_rc_query(struct dvb_usb_device *d)
 {
 	struct pctv452e_state *state = (struct pctv452e_state *)d->priv;
-	u8 b[CMD_BUFFER_SIZE];
-	u8 rx[PCTV_ANSWER_LEN];
 	int ret, i;
-	u8 id = state->c++;
+	u8 id;
+
+	mutex_lock(&state->ca_mutex);
+	id = state->c++;
 
 	/* prepare command header  */
-	b[0] = SYNC_BYTE_OUT;
-	b[1] = id;
-	b[2] = PCTV_CMD_IR;
-	b[3] = 0;
+	state->data[0] = SYNC_BYTE_OUT;
+	state->data[1] = id;
+	state->data[2] = PCTV_CMD_IR;
+	state->data[3] = 0;
 
 	/* send ir request */
-	ret = dvb_usb_generic_rw(d, b, 4, rx, PCTV_ANSWER_LEN, 0);
+	ret = dvb_usb_generic_rw(d, state->data, 4,
+				 state->data, PCTV_ANSWER_LEN, 0);
 	if (ret != 0)
-		return ret;
+		goto ret;
 
 	if (debug > 3) {
-		info("%s: read: %2d: %*ph: ", __func__, ret, 3, rx);
-		for (i = 0; (i < rx[3]) && ((i+3) < PCTV_ANSWER_LEN); i++)
-			info(" %02x", rx[i+3]);
+		info("%s: read: %2d: %*ph: ", __func__, ret, 3, state->data);
+		for (i = 0; (i < state->data[3]) && ((i + 3) < PCTV_ANSWER_LEN); i++)
+			info(" %02x", state->data[i + 3]);
 
 		info("\n");
 	}
 
-	if ((rx[3] == 9) &&  (rx[12] & 0x01)) {
+	if ((state->data[3] == 9) &&  (state->data[12] & 0x01)) {
 		/* got a "press" event */
-		state->last_rc_key = RC_SCANCODE_RC5(rx[7], rx[6]);
+		state->last_rc_key = RC_SCANCODE_RC5(state->data[7], state->data[6]);
 		if (debug > 2)
 			info("%s: cmd=0x%02x sys=0x%02x\n",
-				__func__, rx[6], rx[7]);
+				__func__, state->data[6], state->data[7]);
 
 		rc_keydown(d->rc_dev, RC_TYPE_RC5, state->last_rc_key, 0);
 	} else if (state->last_rc_key) {
 		rc_keyup(d->rc_dev);
 		state->last_rc_key = 0;
 	}
-
-	return 0;
+ret:
+	mutex_unlock(&state->ca_mutex);
+	return ret;
 }
 
 static int pctv452e_read_mac_address(struct dvb_usb_device *d, u8 mac[6])
-- 
cgit v0.10.2


From 5dfd2c8f263dfcaf614d24734f0af8c1c18a9ca8 Mon Sep 17 00:00:00 2001
From: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Date: Fri, 7 Oct 2016 14:15:53 -0300
Subject: [media] pctv452e: don't call BUG_ON() on non-fatal error

There are some conditions on this driver that are tested with
BUG_ON() with are not serious enough to hang a machine.

So, just return an error if this happens.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

diff --git a/drivers/media/usb/dvb-usb/pctv452e.c b/drivers/media/usb/dvb-usb/pctv452e.c
index 58b6850..7ad0006 100644
--- a/drivers/media/usb/dvb-usb/pctv452e.c
+++ b/drivers/media/usb/dvb-usb/pctv452e.c
@@ -109,9 +109,10 @@ static int tt3650_ci_msg(struct dvb_usb_device *d, u8 cmd, u8 *data,
 	unsigned int rlen;
 	int ret;
 
-	BUG_ON(NULL == data && 0 != (write_len | read_len));
-	BUG_ON(write_len > 64 - 4);
-	BUG_ON(read_len > 64 - 4);
+	if (!data || (write_len > 64 - 4) || (read_len > 64 - 4)) {
+		err("%s: transfer data invalid", __func__);
+		return -EIO;
+	};
 
 	mutex_lock(&state->ca_mutex);
 	id = state->c++;
-- 
cgit v0.10.2


From 88ca3619001380a3147246a22cb356f6065ad713 Mon Sep 17 00:00:00 2001
From: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Date: Fri, 7 Oct 2016 12:04:38 -0300
Subject: [media] technisat-usb2: use DMA buffers for I2C transfers

The USB control messages require DMA to work. We cannot pass
a stack-allocated buffer, as it is not warranted that the
stack would be into a DMA enabled area.

On this driver, most of the transfers are OK, but the I2C
one was using stack.

Reviewed-by: Patrick Boettcher <patrick.boettcher@posteo.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

diff --git a/drivers/media/usb/dvb-usb/technisat-usb2.c b/drivers/media/usb/dvb-usb/technisat-usb2.c
index d9f3262..4706628 100644
--- a/drivers/media/usb/dvb-usb/technisat-usb2.c
+++ b/drivers/media/usb/dvb-usb/technisat-usb2.c
@@ -89,9 +89,13 @@ struct technisat_usb2_state {
 static int technisat_usb2_i2c_access(struct usb_device *udev,
 		u8 device_addr, u8 *tx, u8 txlen, u8 *rx, u8 rxlen)
 {
-	u8 b[64];
+	u8 *b;
 	int ret, actual_length;
 
+	b = kmalloc(64, GFP_KERNEL);
+	if (!b)
+		return -ENOMEM;
+
 	deb_i2c("i2c-access: %02x, tx: ", device_addr);
 	debug_dump(tx, txlen, deb_i2c);
 	deb_i2c(" ");
@@ -123,7 +127,7 @@ static int technisat_usb2_i2c_access(struct usb_device *udev,
 
 	if (ret < 0) {
 		err("i2c-error: out failed %02x = %d", device_addr, ret);
-		return -ENODEV;
+		goto err;
 	}
 
 	ret = usb_bulk_msg(udev,
@@ -131,7 +135,7 @@ static int technisat_usb2_i2c_access(struct usb_device *udev,
 			b, 64, &actual_length, 1000);
 	if (ret < 0) {
 		err("i2c-error: in failed %02x = %d", device_addr, ret);
-		return -ENODEV;
+		goto err;
 	}
 
 	if (b[0] != I2C_STATUS_OK) {
@@ -140,7 +144,7 @@ static int technisat_usb2_i2c_access(struct usb_device *udev,
 		if (!(b[0] == I2C_STATUS_NAK &&
 				device_addr == 0x60
 				/* && device_is_technisat_usb2 */))
-			return -ENODEV;
+			goto err;
 	}
 
 	deb_i2c("status: %d, ", b[0]);
@@ -154,7 +158,9 @@ static int technisat_usb2_i2c_access(struct usb_device *udev,
 
 	deb_i2c("\n");
 
-	return 0;
+err:
+	kfree(b);
+	return ret;
 }
 
 static int technisat_usb2_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg *msg,
-- 
cgit v0.10.2


From e2296021081584bd6f0e2ea21e8b909c1d4b5a07 Mon Sep 17 00:00:00 2001
From: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Date: Fri, 7 Oct 2016 13:50:21 -0300
Subject: [media] nova-t-usb2: handle error code on RC query

There's no sense on decoding and generating a RC key code if
there was an error on the URB control message.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

diff --git a/drivers/media/usb/dvb-usb/nova-t-usb2.c b/drivers/media/usb/dvb-usb/nova-t-usb2.c
index 26d7188..1babd33 100644
--- a/drivers/media/usb/dvb-usb/nova-t-usb2.c
+++ b/drivers/media/usb/dvb-usb/nova-t-usb2.c
@@ -76,7 +76,7 @@ static int nova_t_rc_query(struct dvb_usb_device *d, u32 *event, int *state)
 {
 	u8 *buf, data, toggle, custom;
 	u16 raw;
-	int i;
+	int i, ret;
 	struct dibusb_device_state *st = d->priv;
 
 	buf = kmalloc(5, GFP_KERNEL);
@@ -85,7 +85,9 @@ static int nova_t_rc_query(struct dvb_usb_device *d, u32 *event, int *state)
 
 	buf[0] = DIBUSB_REQ_POLL_REMOTE;
 	buf[1] = 0x35;
-	dvb_usb_generic_rw(d, buf, 2, buf, 5, 0);
+	ret = dvb_usb_generic_rw(d, buf, 2, buf, 5, 0);
+	if (ret < 0)
+		goto ret;
 
 	*state = REMOTE_NO_KEY_PRESSED;
 	switch (buf[0]) {
@@ -124,8 +126,9 @@ static int nova_t_rc_query(struct dvb_usb_device *d, u32 *event, int *state)
 			break;
 	}
 
+ret:
 	kfree(buf);
-	return 0;
+	return ret;
 }
 
 static int nova_t_read_mac_address (struct dvb_usb_device *d, u8 mac[6])
-- 
cgit v0.10.2


From aa9efbc7b64aa1c3bf6682d06e6970b874d55d08 Mon Sep 17 00:00:00 2001
From: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Date: Fri, 7 Oct 2016 13:55:53 -0300
Subject: [media] dw2102: return error if su3000_power_ctrl() fails

Instead of silently ignoring the error, return it.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

diff --git a/drivers/media/usb/dvb-usb/dw2102.c b/drivers/media/usb/dvb-usb/dw2102.c
index 5fb0c65..2c720cb 100644
--- a/drivers/media/usb/dvb-usb/dw2102.c
+++ b/drivers/media/usb/dvb-usb/dw2102.c
@@ -852,7 +852,7 @@ static int su3000_power_ctrl(struct dvb_usb_device *d, int i)
 	if (i && !state->initialized) {
 		state->initialized = 1;
 		/* reset board */
-		dvb_usb_generic_rw(d, obuf, 2, NULL, 0, 0);
+		return dvb_usb_generic_rw(d, obuf, 2, NULL, 0, 0);
 	}
 
 	return 0;
-- 
cgit v0.10.2


From 3dadf91cb830ac3a6992e539d82ec604fffe8671 Mon Sep 17 00:00:00 2001
From: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Date: Fri, 7 Oct 2016 13:52:31 -0300
Subject: [media] digitv: handle error code on RC query

There's no sense on decoding and generating a RC key code if
there was an error on the URB control message.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

diff --git a/drivers/media/usb/dvb-usb/digitv.c b/drivers/media/usb/dvb-usb/digitv.c
index 09f8c28b..4284f69 100644
--- a/drivers/media/usb/dvb-usb/digitv.c
+++ b/drivers/media/usb/dvb-usb/digitv.c
@@ -29,7 +29,9 @@ static int digitv_ctrl_msg(struct dvb_usb_device *d,
 		u8 cmd, u8 vv, u8 *wbuf, int wlen, u8 *rbuf, int rlen)
 {
 	struct digitv_state *st = d->priv;
-	int wo = (rbuf == NULL || rlen == 0); /* write-only */
+	int ret, wo;
+
+	wo = (rbuf == NULL || rlen == 0); /* write-only */
 
 	memset(st->sndbuf, 0, 7);
 	memset(st->rcvbuf, 0, 7);
@@ -40,12 +42,12 @@ static int digitv_ctrl_msg(struct dvb_usb_device *d,
 
 	if (wo) {
 		memcpy(&st->sndbuf[3], wbuf, wlen);
-		dvb_usb_generic_write(d, st->sndbuf, 7);
+		ret = dvb_usb_generic_write(d, st->sndbuf, 7);
 	} else {
-		dvb_usb_generic_rw(d, st->sndbuf, 7, st->rcvbuf, 7, 10);
+		ret = dvb_usb_generic_rw(d, st->sndbuf, 7, st->rcvbuf, 7, 10);
 		memcpy(rbuf, &st->rcvbuf[3], rlen);
 	}
-	return 0;
+	return ret;
 }
 
 /* I2C */
-- 
cgit v0.10.2


From 45ae4a5220a43ae79dacb69054a2c7928dd91c94 Mon Sep 17 00:00:00 2001
From: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Date: Mon, 10 Oct 2016 08:28:26 -0300
Subject: [media] cpia2_usb: don't use stack for DMA

The USB control messages require DMA to work. We cannot pass
a stack-allocated buffer, as it is not warranted that the
stack would be into a DMA enabled area.

Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

diff --git a/drivers/media/usb/cpia2/cpia2_usb.c b/drivers/media/usb/cpia2/cpia2_usb.c
index 13620cd..e9100a2 100644
--- a/drivers/media/usb/cpia2/cpia2_usb.c
+++ b/drivers/media/usb/cpia2/cpia2_usb.c
@@ -545,18 +545,30 @@ static void free_sbufs(struct camera_data *cam)
 static int write_packet(struct usb_device *udev,
 			u8 request, u8 * registers, u16 start, size_t size)
 {
+	unsigned char *buf;
+	int ret;
+
 	if (!registers || size <= 0)
 		return -EINVAL;
 
-	return usb_control_msg(udev,
+	buf = kmalloc(size, GFP_KERNEL);
+	if (!buf)
+		return -ENOMEM;
+
+	memcpy(buf, registers, size);
+
+	ret = usb_control_msg(udev,
 			       usb_sndctrlpipe(udev, 0),
 			       request,
 			       USB_TYPE_VENDOR | USB_RECIP_DEVICE,
 			       start,	/* value */
 			       0,	/* index */
-			       registers,	/* buffer */
+			       buf,	/* buffer */
 			       size,
 			       HZ);
+
+	kfree(buf);
+	return ret;
 }
 
 /****************************************************************************
@@ -567,18 +579,32 @@ static int write_packet(struct usb_device *udev,
 static int read_packet(struct usb_device *udev,
 		       u8 request, u8 * registers, u16 start, size_t size)
 {
+	unsigned char *buf;
+	int ret;
+
 	if (!registers || size <= 0)
 		return -EINVAL;
 
-	return usb_control_msg(udev,
+	buf = kmalloc(size, GFP_KERNEL);
+	if (!buf)
+		return -ENOMEM;
+
+	ret = usb_control_msg(udev,
 			       usb_rcvctrlpipe(udev, 0),
 			       request,
 			       USB_DIR_IN|USB_TYPE_VENDOR|USB_RECIP_DEVICE,
 			       start,	/* value */
 			       0,	/* index */
-			       registers,	/* buffer */
+			       buf,	/* buffer */
 			       size,
 			       HZ);
+
+	if (ret >= 0)
+		memcpy(registers, buf, size);
+
+	kfree(buf);
+
+	return ret;
 }
 
 /******************************************************************************
-- 
cgit v0.10.2


From db65c49e442cf9c9d9dc950f67daf109609f982a Mon Sep 17 00:00:00 2001
From: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Date: Mon, 10 Oct 2016 11:11:13 -0300
Subject: [media] s2255drv: don't use stack for DMA

The USB control messages require DMA to work. We cannot pass
a stack-allocated buffer, as it is not warranted that the
stack would be into a DMA enabled area.

Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

diff --git a/drivers/media/usb/s2255/s2255drv.c b/drivers/media/usb/s2255/s2255drv.c
index c3a0e87..f7bb78c 100644
--- a/drivers/media/usb/s2255/s2255drv.c
+++ b/drivers/media/usb/s2255/s2255drv.c
@@ -1901,19 +1901,30 @@ static long s2255_vendor_req(struct s2255_dev *dev, unsigned char Request,
 			     s32 TransferBufferLength, int bOut)
 {
 	int r;
+	unsigned char *buf;
+
+	buf = kmalloc(TransferBufferLength, GFP_KERNEL);
+	if (!buf)
+		return -ENOMEM;
+
 	if (!bOut) {
 		r = usb_control_msg(dev->udev, usb_rcvctrlpipe(dev->udev, 0),
 				    Request,
 				    USB_TYPE_VENDOR | USB_RECIP_DEVICE |
 				    USB_DIR_IN,
-				    Value, Index, TransferBuffer,
+				    Value, Index, buf,
 				    TransferBufferLength, HZ * 5);
+
+		if (r >= 0)
+			memcpy(TransferBuffer, buf, TransferBufferLength);
 	} else {
+		memcpy(buf, TransferBuffer, TransferBufferLength);
 		r = usb_control_msg(dev->udev, usb_sndctrlpipe(dev->udev, 0),
 				    Request, USB_TYPE_VENDOR | USB_RECIP_DEVICE,
-				    Value, Index, TransferBuffer,
+				    Value, Index, buf,
 				    TransferBufferLength, HZ * 5);
 	}
+	kfree(buf);
 	return r;
 }
 
-- 
cgit v0.10.2


From b5f93cb5133d3ad517afef541502c6c9aecf8e5d Mon Sep 17 00:00:00 2001
From: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Date: Mon, 10 Oct 2016 11:17:15 -0300
Subject: [media] stk-webcam: don't use stack for DMA

The USB control messages require DMA to work. We cannot pass
a stack-allocated buffer, as it is not warranted that the
stack would be into a DMA enabled area.

Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

diff --git a/drivers/media/usb/stkwebcam/stk-webcam.c b/drivers/media/usb/stkwebcam/stk-webcam.c
index db200c9..22a9aae 100644
--- a/drivers/media/usb/stkwebcam/stk-webcam.c
+++ b/drivers/media/usb/stkwebcam/stk-webcam.c
@@ -147,20 +147,26 @@ int stk_camera_write_reg(struct stk_camera *dev, u16 index, u8 value)
 int stk_camera_read_reg(struct stk_camera *dev, u16 index, int *value)
 {
 	struct usb_device *udev = dev->udev;
+	unsigned char *buf;
 	int ret;
 
+	buf = kmalloc(sizeof(u8), GFP_KERNEL);
+	if (!buf)
+		return -ENOMEM;
+
 	ret = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0),
 			0x00,
 			USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
 			0x00,
 			index,
-			(u8 *) value,
+			buf,
 			sizeof(u8),
 			500);
-	if (ret < 0)
-		return ret;
-	else
-		return 0;
+	if (ret >= 0)
+		memcpy(value, buf, sizeof(u8));
+
+	kfree(buf);
+	return ret;
 }
 
 static int stk_start_stream(struct stk_camera *dev)
-- 
cgit v0.10.2


From b430eaba0be5eb7140d0065df96982fa6b5ccc1d Mon Sep 17 00:00:00 2001
From: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Date: Mon, 10 Oct 2016 07:55:54 -0300
Subject: [media] flexcop-usb: don't use stack for DMA

The USB control messages require DMA to work. We cannot pass
a stack-allocated buffer, as it is not warranted that the
stack would be into a DMA enabled area.

While here, remove a dead function calling usb_control_msg().

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

diff --git a/drivers/media/usb/b2c2/flexcop-usb.c b/drivers/media/usb/b2c2/flexcop-usb.c
index d4bdba6..52bc42d 100644
--- a/drivers/media/usb/b2c2/flexcop-usb.c
+++ b/drivers/media/usb/b2c2/flexcop-usb.c
@@ -73,23 +73,34 @@ static int flexcop_usb_readwrite_dw(struct flexcop_device *fc, u16 wRegOffsPCI,
 	u8 request_type = (read ? USB_DIR_IN : USB_DIR_OUT) | USB_TYPE_VENDOR;
 	u8 wAddress = B2C2_FLEX_PCIOFFSET_TO_INTERNALADDR(wRegOffsPCI) |
 		(read ? 0x80 : 0);
+	int ret;
+
+	mutex_lock(&fc_usb->data_mutex);
+	if (!read)
+		memcpy(fc_usb->data, val, sizeof(*val));
 
-	int len = usb_control_msg(fc_usb->udev,
+	ret = usb_control_msg(fc_usb->udev,
 			read ? B2C2_USB_CTRL_PIPE_IN : B2C2_USB_CTRL_PIPE_OUT,
 			request,
 			request_type, /* 0xc0 read or 0x40 write */
 			wAddress,
 			0,
-			val,
+			fc_usb->data,
 			sizeof(u32),
 			B2C2_WAIT_FOR_OPERATION_RDW * HZ);
 
-	if (len != sizeof(u32)) {
+	if (ret != sizeof(u32)) {
 		err("error while %s dword from %d (%d).", read ? "reading" :
 				"writing", wAddress, wRegOffsPCI);
-		return -EIO;
+		if (ret >= 0)
+			ret = -EIO;
 	}
-	return 0;
+
+	if (read && ret >= 0)
+		memcpy(val, fc_usb->data, sizeof(*val));
+	mutex_unlock(&fc_usb->data_mutex);
+
+	return ret;
 }
 /*
  * DKT 010817 - add support for V8 memory read/write and flash update
@@ -100,9 +111,14 @@ static int flexcop_usb_v8_memory_req(struct flexcop_usb *fc_usb,
 {
 	u8 request_type = USB_TYPE_VENDOR;
 	u16 wIndex;
-	int nWaitTime, pipe, len;
+	int nWaitTime, pipe, ret;
 	wIndex = page << 8;
 
+	if (buflen > sizeof(fc_usb->data)) {
+		err("Buffer size bigger than max URB control message\n");
+		return -EIO;
+	}
+
 	switch (req) {
 	case B2C2_USB_READ_V8_MEM:
 		nWaitTime = B2C2_WAIT_FOR_OPERATION_V8READ;
@@ -127,17 +143,32 @@ static int flexcop_usb_v8_memory_req(struct flexcop_usb *fc_usb,
 	deb_v8("v8mem: %02x %02x %04x %04x, len: %d\n", request_type, req,
 			wAddress, wIndex, buflen);
 
-	len = usb_control_msg(fc_usb->udev, pipe,
+	mutex_lock(&fc_usb->data_mutex);
+
+	if ((request_type & USB_ENDPOINT_DIR_MASK) == USB_DIR_OUT)
+		memcpy(fc_usb->data, pbBuffer, buflen);
+
+	ret = usb_control_msg(fc_usb->udev, pipe,
 			req,
 			request_type,
 			wAddress,
 			wIndex,
-			pbBuffer,
+			fc_usb->data,
 			buflen,
 			nWaitTime * HZ);
+	if (ret != buflen)
+		ret = -EIO;
+
+	if (ret >= 0) {
+		ret = 0;
+		if ((request_type & USB_ENDPOINT_DIR_MASK) == USB_DIR_IN)
+			memcpy(pbBuffer, fc_usb->data, buflen);
+	}
 
-	debug_dump(pbBuffer, len, deb_v8);
-	return len == buflen ? 0 : -EIO;
+	mutex_unlock(&fc_usb->data_mutex);
+
+	debug_dump(pbBuffer, ret, deb_v8);
+	return ret;
 }
 
 #define bytes_left_to_read_on_page(paddr,buflen) \
@@ -196,29 +227,6 @@ static int flexcop_usb_get_mac_addr(struct flexcop_device *fc, int extended)
 		fc->dvb_adapter.proposed_mac, 6);
 }
 
-#if 0
-static int flexcop_usb_utility_req(struct flexcop_usb *fc_usb, int set,
-		flexcop_usb_utility_function_t func, u8 extra, u16 wIndex,
-		u16 buflen, u8 *pvBuffer)
-{
-	u16 wValue;
-	u8 request_type = (set ? USB_DIR_OUT : USB_DIR_IN) | USB_TYPE_VENDOR;
-	int nWaitTime = 2,
-	    pipe = set ? B2C2_USB_CTRL_PIPE_OUT : B2C2_USB_CTRL_PIPE_IN, len;
-	wValue = (func << 8) | extra;
-
-	len = usb_control_msg(fc_usb->udev,pipe,
-			B2C2_USB_UTILITY,
-			request_type,
-			wValue,
-			wIndex,
-			pvBuffer,
-			buflen,
-			nWaitTime * HZ);
-	return len == buflen ? 0 : -EIO;
-}
-#endif
-
 /* usb i2c stuff */
 static int flexcop_usb_i2c_req(struct flexcop_i2c_adapter *i2c,
 		flexcop_usb_request_t req, flexcop_usb_i2c_function_t func,
@@ -226,9 +234,14 @@ static int flexcop_usb_i2c_req(struct flexcop_i2c_adapter *i2c,
 {
 	struct flexcop_usb *fc_usb = i2c->fc->bus_specific;
 	u16 wValue, wIndex;
-	int nWaitTime,pipe,len;
+	int nWaitTime, pipe, ret;
 	u8 request_type = USB_TYPE_VENDOR;
 
+	if (buflen > sizeof(fc_usb->data)) {
+		err("Buffer size bigger than max URB control message\n");
+		return -EIO;
+	}
+
 	switch (func) {
 	case USB_FUNC_I2C_WRITE:
 	case USB_FUNC_I2C_MULTIWRITE:
@@ -257,15 +270,32 @@ static int flexcop_usb_i2c_req(struct flexcop_i2c_adapter *i2c,
 			wValue & 0xff, wValue >> 8,
 			wIndex & 0xff, wIndex >> 8);
 
-	len = usb_control_msg(fc_usb->udev,pipe,
+	mutex_lock(&fc_usb->data_mutex);
+
+	if ((request_type & USB_ENDPOINT_DIR_MASK) == USB_DIR_OUT)
+		memcpy(fc_usb->data, buf, buflen);
+
+	ret = usb_control_msg(fc_usb->udev, pipe,
 			req,
 			request_type,
 			wValue,
 			wIndex,
-			buf,
+			fc_usb->data,
 			buflen,
 			nWaitTime * HZ);
-	return len == buflen ? 0 : -EREMOTEIO;
+
+	if (ret != buflen)
+		ret = -EIO;
+
+	if (ret >= 0) {
+		ret = 0;
+		if ((request_type & USB_ENDPOINT_DIR_MASK) == USB_DIR_IN)
+			memcpy(buf, fc_usb->data, buflen);
+	}
+
+	mutex_unlock(&fc_usb->data_mutex);
+
+	return 0;
 }
 
 /* actual bus specific access functions,
@@ -516,6 +546,7 @@ static int flexcop_usb_probe(struct usb_interface *intf,
 	/* general flexcop init */
 	fc_usb = fc->bus_specific;
 	fc_usb->fc_dev = fc;
+	mutex_init(&fc_usb->data_mutex);
 
 	fc->read_ibi_reg  = flexcop_usb_read_ibi_reg;
 	fc->write_ibi_reg = flexcop_usb_write_ibi_reg;
diff --git a/drivers/media/usb/b2c2/flexcop-usb.h b/drivers/media/usb/b2c2/flexcop-usb.h
index 92529a9..25ad431 100644
--- a/drivers/media/usb/b2c2/flexcop-usb.h
+++ b/drivers/media/usb/b2c2/flexcop-usb.h
@@ -29,6 +29,10 @@ struct flexcop_usb {
 
 	u8 tmp_buffer[1023+190];
 	int tmp_buffer_length;
+
+	/* for URB control messages */
+	u8 data[80];
+	struct mutex data_mutex;
 };
 
 #if 0
-- 
cgit v0.10.2


From 59dde8e70cfb7afbc1b647d7d3440dfb9a78b431 Mon Sep 17 00:00:00 2001
From: kbuild test robot <fengguang.wu@intel.com>
Date: Tue, 11 Oct 2016 10:22:08 -0300
Subject: [media] pctv452e: fix semicolon.cocci warnings

drivers/media/usb/dvb-usb/pctv452e.c:115:2-3: Unneeded semicolon

 Remove unneeded semicolon.

Generated by: scripts/coccinelle/misc/semicolon.cocci

Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

diff --git a/drivers/media/usb/dvb-usb/pctv452e.c b/drivers/media/usb/dvb-usb/pctv452e.c
index 7ad0006..07fa08b 100644
--- a/drivers/media/usb/dvb-usb/pctv452e.c
+++ b/drivers/media/usb/dvb-usb/pctv452e.c
@@ -112,7 +112,7 @@ static int tt3650_ci_msg(struct dvb_usb_device *d, u8 cmd, u8 *data,
 	if (!data || (write_len > 64 - 4) || (read_len > 64 - 4)) {
 		err("%s: transfer data invalid", __func__);
 		return -EIO;
-	};
+	}
 
 	mutex_lock(&state->ca_mutex);
 	id = state->c++;
-- 
cgit v0.10.2


From 1aeb5b615cd10db7324d4e4d167c4916dfeca311 Mon Sep 17 00:00:00 2001
From: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Date: Wed, 12 Oct 2016 08:21:43 -0300
Subject: [media] radio-bcm2048: don't ignore errors

Remove this warning:

drivers/staging/media/bcm2048/radio-bcm2048.c: In function 'bcm2048_set_rds_no_lock':
drivers/staging/media/bcm2048/radio-bcm2048.c:467:6: warning: variable 'err' set but not used [-Wunused-but-set-variable]
  int err;
      ^~~

By returning the error code.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

diff --git a/drivers/staging/media/bcm2048/radio-bcm2048.c b/drivers/staging/media/bcm2048/radio-bcm2048.c
index 8dade19..0f08840 100644
--- a/drivers/staging/media/bcm2048/radio-bcm2048.c
+++ b/drivers/staging/media/bcm2048/radio-bcm2048.c
@@ -482,6 +482,8 @@ static int bcm2048_set_rds_no_lock(struct bcm2048_device *bdev, u8 rds_on)
 					   flags);
 		memset(&bdev->rds_info, 0, sizeof(bdev->rds_info));
 	}
+	if (err)
+		return err;
 
 	err = bcm2048_send_command(bdev, BCM2048_I2C_FM_RDS_SYSTEM,
 				   bdev->cache_fm_rds_system);
-- 
cgit v0.10.2