From 316541bf70281b6c3b501b442b6994c1839776ad Mon Sep 17 00:00:00 2001 From: Jesper Juhl Date: Mon, 11 Jul 2011 22:59:36 +0200 Subject: USB: Remove test for NULL that'll never happen in usb_disconnect() In drivers/usb/core/hub.c::usb_disconnect(), 'udev' will never be NULL, so remove the test and printing of debug message. Signed-off-by: Jesper Juhl Acked-by: Alan Stern Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index a428aa0..99fff6b 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -1636,11 +1636,6 @@ void usb_disconnect(struct usb_device **pdev) int i; struct usb_hcd *hcd = bus_to_hcd(udev->bus); - if (!udev) { - pr_debug ("%s nodev\n", __func__); - return; - } - /* mark the device as inactive, so any further urb submissions for * this device (and any of its children) will fail immediately. * this quiesces everything except pending urbs. -- cgit v0.10.2 From f02fe890ece7d695a5744b20525d45312382e6e4 Mon Sep 17 00:00:00 2001 From: Seth Forshee Date: Tue, 26 Jul 2011 09:56:07 -0500 Subject: usb_storage: Don't freeze in usb-stor-scan Scanning cannot be run during suspend or hibernation, but if usb-stor-scan freezes another thread waiting on scanning to complete may fail to freeze. However, if usb-stor-scan is left freezable without ever actually freezing then the freezer will wait on it to exit, and threads waiting for scanning to finish will no longer be blocked. One problem with this approach is that usb-stor-scan has a delay to wait for devices to settle (which is currently the only point where it can freeze). To work around this we can request that the freezer send a fake signal when freezing, then use interruptible sleep to wake the thread early when freezing happens. To make this happen, the following changes are made to usb-stor-scan: * Use set_freezable_with_signal() instead of set_freezable() to request a fake signal when freezing * Use wait_event_interruptible_timeout() instead of wait_event_freezable_timeout() to avoid freezing Signed-off-by: Seth Forshee Acked-by: Alan Stern Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/storage/usb.c b/drivers/usb/storage/usb.c index 0ca0958..c325e69 100644 --- a/drivers/usb/storage/usb.c +++ b/drivers/usb/storage/usb.c @@ -831,12 +831,22 @@ static int usb_stor_scan_thread(void * __us) dev_dbg(dev, "device found\n"); - set_freezable(); - /* Wait for the timeout to expire or for a disconnect */ + set_freezable_with_signal(); + /* + * Wait for the timeout to expire or for a disconnect + * + * We can't freeze in this thread or we risk causing khubd to + * fail to freeze, but we can't be non-freezable either. Nor can + * khubd freeze while waiting for scanning to complete as it may + * hold the device lock, causing a hang when suspending devices. + * So we request a fake signal when freezing and use + * interruptible sleep to kick us out of our wait early when + * freezing happens. + */ if (delay_use > 0) { dev_dbg(dev, "waiting for device to settle " "before scanning\n"); - wait_event_freezable_timeout(us->delay_wait, + wait_event_interruptible_timeout(us->delay_wait, test_bit(US_FLIDX_DONT_SCAN, &us->dflags), delay_use * HZ); } -- cgit v0.10.2 From 53e77df25f64567ee1f55e7d76b8843689c79d9e Mon Sep 17 00:00:00 2001 From: Oliver Neukum Date: Wed, 13 Jul 2011 13:54:48 +0200 Subject: USB: ipw: convert to usb-wwan framework From 2d487c10136f76cf3705881d34868e8592839cfe Mon Sep 17 00:00:00 2001 From: Oliver Neukum Date: Tue, 12 Jul 2011 15:36:51 +0200 Subject: [PATCH] USB: ipw: convert to usb-wwan framework This patch allows the ipw driver to use the multibuffer infrastructure of usb-wwan. This improves speed. Signed-off-by: Oliver Neukum Tested-by: Michal Hybner Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/ipw.c b/drivers/usb/serial/ipw.c index ca77e88..5170799 100644 --- a/drivers/usb/serial/ipw.c +++ b/drivers/usb/serial/ipw.c @@ -47,6 +47,7 @@ #include #include #include +#include "usb-wwan.h" /* * Version Information @@ -185,7 +186,7 @@ static int ipw_open(struct tty_struct *tty, struct usb_serial_port *port) /*--2: Start reading from the device */ dbg("%s: setting up bulk read callback", __func__); - usb_serial_generic_open(tty, port); + usb_wwan_open(tty, port); /*--3: Tell the modem to open the floodgates on the rx bulk channel */ dbg("%s:asking modem for RxRead (RXBULK_ON)", __func__); @@ -219,6 +220,29 @@ static int ipw_open(struct tty_struct *tty, struct usb_serial_port *port) return 0; } +/* fake probe - only to allocate data structures */ +static int ipw_probe(struct usb_serial *serial, const struct usb_device_id *id) +{ + struct usb_wwan_intf_private *data; + + data = kzalloc(sizeof(struct usb_wwan_intf_private), GFP_KERNEL); + if (!data) + return -ENOMEM; + + spin_lock_init(&data->susp_lock); + usb_set_serial_data(serial, data); + return 0; +} + +static void ipw_release(struct usb_serial *serial) +{ + struct usb_wwan_intf_private *data = usb_get_serial_data(serial); + + usb_wwan_release(serial); + usb_set_serial_data(serial, NULL); + kfree(data); +} + static void ipw_dtr_rts(struct usb_serial_port *port, int on) { struct usb_device *dev = port->serial->dev; @@ -285,7 +309,7 @@ static void ipw_close(struct usb_serial_port *port) dev_err(&port->dev, "Disabling bulk RxRead failed (error = %d)\n", result); - usb_serial_generic_close(port); + usb_wwan_close(port); } static struct usb_serial_driver ipw_device = { @@ -297,9 +321,14 @@ static struct usb_serial_driver ipw_device = { .usb_driver = &usb_ipw_driver, .id_table = usb_ipw_ids, .num_ports = 1, + .disconnect = usb_wwan_disconnect, .open = ipw_open, .close = ipw_close, + .probe = ipw_probe, + .attach = usb_wwan_startup, + .release = ipw_release, .dtr_rts = ipw_dtr_rts, + .write = usb_wwan_write, }; -- cgit v0.10.2 From ea835863950dce6f9c2bddc97d8fc67e1d01a2b9 Mon Sep 17 00:00:00 2001 From: Zack Parsons Date: Fri, 29 Jul 2011 00:17:57 -0700 Subject: usb: misc: usbled: fixed coding style issues Fixed multiple coding style issues Signed-off-by: Zack Parsons Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/misc/usbled.c b/drivers/usb/misc/usbled.c index 1616ad1..43f84e5 100644 --- a/drivers/usb/misc/usbled.c +++ b/drivers/usb/misc/usbled.c @@ -33,10 +33,10 @@ static const struct usb_device_id id_table[] = { .driver_info = DREAM_CHEEKY_WEBMAIL_NOTIFIER }, { }, }; -MODULE_DEVICE_TABLE (usb, id_table); +MODULE_DEVICE_TABLE(usb, id_table); struct usb_led { - struct usb_device * udev; + struct usb_device *udev; unsigned char blue; unsigned char red; unsigned char green; @@ -113,14 +113,16 @@ static void change_color(struct usb_led *led) } #define show_set(value) \ -static ssize_t show_##value(struct device *dev, struct device_attribute *attr, char *buf) \ +static ssize_t show_##value(struct device *dev, struct device_attribute *attr,\ + char *buf) \ { \ struct usb_interface *intf = to_usb_interface(dev); \ struct usb_led *led = usb_get_intfdata(intf); \ \ return sprintf(buf, "%d\n", led->value); \ } \ -static ssize_t set_##value(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) \ +static ssize_t set_##value(struct device *dev, struct device_attribute *attr,\ + const char *buf, size_t count) \ { \ struct usb_interface *intf = to_usb_interface(dev); \ struct usb_led *led = usb_get_intfdata(intf); \ @@ -135,7 +137,8 @@ show_set(blue); show_set(red); show_set(green); -static int led_probe(struct usb_interface *interface, const struct usb_device_id *id) +static int led_probe(struct usb_interface *interface, + const struct usb_device_id *id) { struct usb_device *udev = interface_to_usbdev(interface); struct usb_led *dev = NULL; @@ -150,7 +153,7 @@ static int led_probe(struct usb_interface *interface, const struct usb_device_id dev->udev = usb_get_dev(udev); dev->type = id->driver_info; - usb_set_intfdata (interface, dev); + usb_set_intfdata(interface, dev); retval = device_create_file(&interface->dev, &dev_attr_blue); if (retval) @@ -194,7 +197,7 @@ error: device_remove_file(&interface->dev, &dev_attr_blue); device_remove_file(&interface->dev, &dev_attr_red); device_remove_file(&interface->dev, &dev_attr_green); - usb_set_intfdata (interface, NULL); + usb_set_intfdata(interface, NULL); usb_put_dev(dev->udev); kfree(dev); error_mem: @@ -205,14 +208,14 @@ static void led_disconnect(struct usb_interface *interface) { struct usb_led *dev; - dev = usb_get_intfdata (interface); + dev = usb_get_intfdata(interface); device_remove_file(&interface->dev, &dev_attr_blue); device_remove_file(&interface->dev, &dev_attr_red); device_remove_file(&interface->dev, &dev_attr_green); /* first remove the files, then set the pointer to NULL */ - usb_set_intfdata (interface, NULL); + usb_set_intfdata(interface, NULL); usb_put_dev(dev->udev); @@ -243,8 +246,8 @@ static void __exit usb_led_exit(void) usb_deregister(&led_driver); } -module_init (usb_led_init); -module_exit (usb_led_exit); +module_init(usb_led_init); +module_exit(usb_led_exit); MODULE_AUTHOR(DRIVER_AUTHOR); MODULE_DESCRIPTION(DRIVER_DESC); -- cgit v0.10.2 From 507a3ea7f20b0964e459f0ed5125717e8b46d159 Mon Sep 17 00:00:00 2001 From: Zack Parsons Date: Thu, 28 Jul 2011 18:58:30 -0700 Subject: usb: misc: usblcd: fixed coding style issues Fixed multiple coding style issues Signed-off-by: Zack Parsons Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/misc/usblcd.c b/drivers/usb/misc/usblcd.c index 5164815..6ac1069 100644 --- a/drivers/usb/misc/usblcd.c +++ b/drivers/usb/misc/usblcd.c @@ -18,7 +18,7 @@ #include #include #include -#include +#include #include #define DRIVER_VERSION "USBLCD Driver Version 1.05" @@ -34,22 +34,29 @@ static const struct usb_device_id id_table[] = { { .idVendor = 0x10D2, .match_flags = USB_DEVICE_ID_MATCH_VENDOR, }, { }, }; -MODULE_DEVICE_TABLE (usb, id_table); +MODULE_DEVICE_TABLE(usb, id_table); static DEFINE_MUTEX(open_disc_mutex); struct usb_lcd { - struct usb_device * udev; /* init: probe_lcd */ - struct usb_interface * interface; /* the interface for this device */ - unsigned char * bulk_in_buffer; /* the buffer to receive data */ - size_t bulk_in_size; /* the size of the receive buffer */ - __u8 bulk_in_endpointAddr; /* the address of the bulk in endpoint */ - __u8 bulk_out_endpointAddr; /* the address of the bulk out endpoint */ + struct usb_device *udev; /* init: probe_lcd */ + struct usb_interface *interface; /* the interface for + this device */ + unsigned char *bulk_in_buffer; /* the buffer to receive + data */ + size_t bulk_in_size; /* the size of the + receive buffer */ + __u8 bulk_in_endpointAddr; /* the address of the + bulk in endpoint */ + __u8 bulk_out_endpointAddr; /* the address of the + bulk out endpoint */ struct kref kref; - struct semaphore limit_sem; /* to stop writes at full throttle from - * using up all RAM */ - struct usb_anchor submitted; /* URBs to wait for before suspend */ + struct semaphore limit_sem; /* to stop writes at + full throttle from + using up all RAM */ + struct usb_anchor submitted; /* URBs to wait for + before suspend */ }; #define to_lcd_dev(d) container_of(d, struct usb_lcd, kref) @@ -63,8 +70,8 @@ static void lcd_delete(struct kref *kref) struct usb_lcd *dev = to_lcd_dev(kref); usb_put_dev(dev->udev); - kfree (dev->bulk_in_buffer); - kfree (dev); + kfree(dev->bulk_in_buffer); + kfree(dev); } @@ -80,7 +87,7 @@ static int lcd_open(struct inode *inode, struct file *file) interface = usb_find_interface(&lcd_driver, subminor); if (!interface) { mutex_unlock(&lcd_mutex); - err ("USBLCD: %s - error, can't find device for minor %d", + err("USBLCD: %s - error, can't find device for minor %d", __func__, subminor); return -ENODEV; } @@ -126,7 +133,8 @@ static int lcd_release(struct inode *inode, struct file *file) return 0; } -static ssize_t lcd_read(struct file *file, char __user * buffer, size_t count, loff_t *ppos) +static ssize_t lcd_read(struct file *file, char __user * buffer, + size_t count, loff_t *ppos) { struct usb_lcd *dev; int retval = 0; @@ -135,8 +143,9 @@ static ssize_t lcd_read(struct file *file, char __user * buffer, size_t count, l dev = file->private_data; /* do a blocking bulk read to get data from the device */ - retval = usb_bulk_msg(dev->udev, - usb_rcvbulkpipe(dev->udev, dev->bulk_in_endpointAddr), + retval = usb_bulk_msg(dev->udev, + usb_rcvbulkpipe(dev->udev, + dev->bulk_in_endpointAddr), dev->bulk_in_buffer, min(dev->bulk_in_size, count), &bytes_read, 10000); @@ -161,23 +170,23 @@ static long lcd_ioctl(struct file *file, unsigned int cmd, unsigned long arg) dev = file->private_data; if (dev == NULL) return -ENODEV; - + switch (cmd) { case IOCTL_GET_HARD_VERSION: mutex_lock(&lcd_mutex); bcdDevice = le16_to_cpu((dev->udev)->descriptor.bcdDevice); - sprintf(buf,"%1d%1d.%1d%1d", + sprintf(buf, "%1d%1d.%1d%1d", (bcdDevice & 0xF000)>>12, (bcdDevice & 0xF00)>>8, (bcdDevice & 0xF0)>>4, (bcdDevice & 0xF)); mutex_unlock(&lcd_mutex); - if (copy_to_user((void __user *)arg,buf,strlen(buf))!=0) + if (copy_to_user((void __user *)arg, buf, strlen(buf)) != 0) return -EFAULT; break; case IOCTL_GET_DRV_VERSION: - sprintf(buf,DRIVER_VERSION); - if (copy_to_user((void __user *)arg,buf,strlen(buf))!=0) + sprintf(buf, DRIVER_VERSION); + if (copy_to_user((void __user *)arg, buf, strlen(buf)) != 0) return -EFAULT; break; default: @@ -199,7 +208,7 @@ static void lcd_write_bulk_callback(struct urb *urb) if (status && !(status == -ENOENT || status == -ECONNRESET || - status == -ESHUTDOWN)) { + status == -ESHUTDOWN)) { dbg("USBLCD: %s - nonzero write bulk status received: %d", __func__, status); } @@ -210,15 +219,16 @@ static void lcd_write_bulk_callback(struct urb *urb) up(&dev->limit_sem); } -static ssize_t lcd_write(struct file *file, const char __user * user_buffer, size_t count, loff_t *ppos) +static ssize_t lcd_write(struct file *file, const char __user * user_buffer, + size_t count, loff_t *ppos) { struct usb_lcd *dev; - int retval = 0, r; + int retval = 0, r; struct urb *urb = NULL; char *buf = NULL; - + dev = file->private_data; - + /* verify that we actually have some data to write */ if (count == 0) goto exit; @@ -233,34 +243,38 @@ static ssize_t lcd_write(struct file *file, const char __user * user_buffer, siz retval = -ENOMEM; goto err_no_buf; } - - buf = usb_alloc_coherent(dev->udev, count, GFP_KERNEL, &urb->transfer_dma); + + buf = usb_alloc_coherent(dev->udev, count, GFP_KERNEL, + &urb->transfer_dma); if (!buf) { retval = -ENOMEM; goto error; } - + if (copy_from_user(buf, user_buffer, count)) { retval = -EFAULT; goto error; } - + /* initialize the urb properly */ usb_fill_bulk_urb(urb, dev->udev, - usb_sndbulkpipe(dev->udev, dev->bulk_out_endpointAddr), + usb_sndbulkpipe(dev->udev, + dev->bulk_out_endpointAddr), buf, count, lcd_write_bulk_callback, dev); urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; usb_anchor_urb(urb, &dev->submitted); - + /* send the data out the bulk port */ retval = usb_submit_urb(urb, GFP_KERNEL); if (retval) { - err("USBLCD: %s - failed submitting write urb, error %d", __func__, retval); + err("USBLCD: %s - failed submitting write urb, error %d", + __func__, retval); goto error_unanchor; } - - /* release our reference to this urb, the USB core will eventually free it entirely */ + + /* release our reference to this urb, + the USB core will eventually free it entirely */ usb_free_urb(urb); exit: @@ -276,13 +290,13 @@ err_no_buf: } static const struct file_operations lcd_fops = { - .owner = THIS_MODULE, - .read = lcd_read, - .write = lcd_write, - .open = lcd_open, + .owner = THIS_MODULE, + .read = lcd_read, + .write = lcd_write, + .open = lcd_open, .unlocked_ioctl = lcd_ioctl, - .release = lcd_release, - .llseek = noop_llseek, + .release = lcd_release, + .llseek = noop_llseek, }; /* @@ -290,12 +304,13 @@ static const struct file_operations lcd_fops = { * and to have the device registered with the driver core */ static struct usb_class_driver lcd_class = { - .name = "lcd%d", - .fops = &lcd_fops, - .minor_base = USBLCD_MINOR, + .name = "lcd%d", + .fops = &lcd_fops, + .minor_base = USBLCD_MINOR, }; -static int lcd_probe(struct usb_interface *interface, const struct usb_device_id *id) +static int lcd_probe(struct usb_interface *interface, + const struct usb_device_id *id) { struct usb_lcd *dev = NULL; struct usb_host_interface *iface_desc; @@ -322,7 +337,7 @@ static int lcd_probe(struct usb_interface *interface, const struct usb_device_id retval = -ENODEV; goto error; } - + /* set up the endpoint information */ /* use only the first bulk-in and bulk-out endpoints */ iface_desc = interface->cur_altsetting; @@ -369,7 +384,7 @@ static int lcd_probe(struct usb_interface *interface, const struct usb_device_id dev_info(&interface->dev, "USBLCD Version %1d%1d.%1d%1d found " "at address %d\n", (i & 0xF000)>>12, (i & 0xF00)>>8, - (i & 0xF0)>>4,(i & 0xF), dev->udev->devnum); + (i & 0xF0)>>4, (i & 0xF), dev->udev->devnum); /* let the user know what node this device is now attached to */ dev_info(&interface->dev, "USB LCD device now attached to USBLCD-%d\n", @@ -401,7 +416,7 @@ static int lcd_suspend(struct usb_interface *intf, pm_message_t message) return 0; } -static int lcd_resume (struct usb_interface *intf) +static int lcd_resume(struct usb_interface *intf) { return 0; } @@ -409,16 +424,16 @@ static int lcd_resume (struct usb_interface *intf) static void lcd_disconnect(struct usb_interface *interface) { struct usb_lcd *dev; - int minor = interface->minor; + int minor = interface->minor; mutex_lock(&open_disc_mutex); - dev = usb_get_intfdata(interface); - usb_set_intfdata(interface, NULL); + dev = usb_get_intfdata(interface); + usb_set_intfdata(interface, NULL); mutex_unlock(&open_disc_mutex); - /* give back our minor */ - usb_deregister_dev(interface, &lcd_class); - + /* give back our minor */ + usb_deregister_dev(interface, &lcd_class); + /* decrement our usage count */ kref_put(&dev->kref, lcd_delete); @@ -438,7 +453,7 @@ static struct usb_driver lcd_driver = { static int __init usb_lcd_init(void) { int result; - + result = usb_register(&lcd_driver); if (result) err("usb_register failed. Error number %d", result); -- cgit v0.10.2 From e25e0eb209bf945db554512430ee128e6bb7b291 Mon Sep 17 00:00:00 2001 From: Arvid Brodin Date: Sun, 21 Aug 2011 08:29:24 +0200 Subject: usb/isp1760: Move some code (prepare for next patch) Move the few lines of code in isp1760_enable_interrupts() and isp1760_init_maps() into isp1760_run(). This makes the following patch easier. Signed-off-by: Arvid Brodin Signed-off-by: Sebastian Andrzej Siewior Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/host/isp1760-hcd.c b/drivers/usb/host/isp1760-hcd.c index 840beda..a46ccf9 100644 --- a/drivers/usb/host/isp1760-hcd.c +++ b/drivers/usb/host/isp1760-hcd.c @@ -514,23 +514,18 @@ static int isp1760_hc_setup(struct usb_hcd *hcd) return priv_init(hcd); } -static void isp1760_init_maps(struct usb_hcd *hcd) +static int isp1760_run(struct usb_hcd *hcd) { - /*set last maps, for iso its only 1, else 32 tds bitmap*/ - reg_write32(hcd->regs, HC_ATL_PTD_LASTPTD_REG, 0x80000000); - reg_write32(hcd->regs, HC_INT_PTD_LASTPTD_REG, 0x80000000); - reg_write32(hcd->regs, HC_ISO_PTD_LASTPTD_REG, 0x00000001); + int retval; + u32 temp; + u32 command; + u32 chipid; - reg_write32(hcd->regs, HC_ATL_PTD_SKIPMAP_REG, 0xffffffff); - reg_write32(hcd->regs, HC_INT_PTD_SKIPMAP_REG, 0xffffffff); - reg_write32(hcd->regs, HC_ISO_PTD_SKIPMAP_REG, 0xffffffff); + hcd->uses_new_polling = 1; - reg_write32(hcd->regs, HC_BUFFER_STATUS_REG, - ATL_BUF_FILL | INT_BUF_FILL); -} + hcd->state = HC_STATE_RUNNING; -static void isp1760_enable_interrupts(struct usb_hcd *hcd) -{ + /* Set PTD interrupt AND & OR maps */ reg_write32(hcd->regs, HC_ATL_IRQ_MASK_AND_REG, 0); reg_write32(hcd->regs, HC_ATL_IRQ_MASK_OR_REG, 0xffffffff); reg_write32(hcd->regs, HC_INT_IRQ_MASK_AND_REG, 0); @@ -538,19 +533,7 @@ static void isp1760_enable_interrupts(struct usb_hcd *hcd) reg_write32(hcd->regs, HC_ISO_IRQ_MASK_AND_REG, 0); reg_write32(hcd->regs, HC_ISO_IRQ_MASK_OR_REG, 0xffffffff); /* step 23 passed */ -} -static int isp1760_run(struct usb_hcd *hcd) -{ - int retval; - u32 temp; - u32 command; - u32 chipid; - - hcd->uses_new_polling = 1; - - hcd->state = HC_STATE_RUNNING; - isp1760_enable_interrupts(hcd); temp = reg_read32(hcd->regs, HC_HW_MODE_CTRL); reg_write32(hcd->regs, HC_HW_MODE_CTRL, temp | HW_GLOBAL_INTR_EN); @@ -581,8 +564,16 @@ static int isp1760_run(struct usb_hcd *hcd) chipid & 0xffff, chipid >> 16); /* PTD Register Init Part 2, Step 28 */ - /* enable INTs */ - isp1760_init_maps(hcd); + + /* Setup registers controlling PTD checking */ + reg_write32(hcd->regs, HC_ATL_PTD_LASTPTD_REG, 0x80000000); + reg_write32(hcd->regs, HC_INT_PTD_LASTPTD_REG, 0x80000000); + reg_write32(hcd->regs, HC_ISO_PTD_LASTPTD_REG, 0x00000001); + reg_write32(hcd->regs, HC_ATL_PTD_SKIPMAP_REG, 0xffffffff); + reg_write32(hcd->regs, HC_INT_PTD_SKIPMAP_REG, 0xffffffff); + reg_write32(hcd->regs, HC_ISO_PTD_SKIPMAP_REG, 0xffffffff); + reg_write32(hcd->regs, HC_BUFFER_STATUS_REG, + ATL_BUF_FILL | INT_BUF_FILL); /* GRR this is run-once init(), being done every time the HC starts. * So long as they're part of class devices, we can't do it init() -- cgit v0.10.2 From 0ba7905e030a409fd0bb92cb965e915c0cb01030 Mon Sep 17 00:00:00 2001 From: Arvid Brodin Date: Sun, 21 Aug 2011 08:29:25 +0200 Subject: usb/isp1760: Move isp1760_run within file (prepare for next patch) Like the previous patch, this patch has been split from the next one for clarity. Signed-off-by: Arvid Brodin Signed-off-by: Sebastian Andrzej Siewior Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/host/isp1760-hcd.c b/drivers/usb/host/isp1760-hcd.c index a46ccf9..e399e23 100644 --- a/drivers/usb/host/isp1760-hcd.c +++ b/drivers/usb/host/isp1760-hcd.c @@ -514,74 +514,6 @@ static int isp1760_hc_setup(struct usb_hcd *hcd) return priv_init(hcd); } -static int isp1760_run(struct usb_hcd *hcd) -{ - int retval; - u32 temp; - u32 command; - u32 chipid; - - hcd->uses_new_polling = 1; - - hcd->state = HC_STATE_RUNNING; - - /* Set PTD interrupt AND & OR maps */ - reg_write32(hcd->regs, HC_ATL_IRQ_MASK_AND_REG, 0); - reg_write32(hcd->regs, HC_ATL_IRQ_MASK_OR_REG, 0xffffffff); - reg_write32(hcd->regs, HC_INT_IRQ_MASK_AND_REG, 0); - reg_write32(hcd->regs, HC_INT_IRQ_MASK_OR_REG, 0xffffffff); - reg_write32(hcd->regs, HC_ISO_IRQ_MASK_AND_REG, 0); - reg_write32(hcd->regs, HC_ISO_IRQ_MASK_OR_REG, 0xffffffff); - /* step 23 passed */ - - temp = reg_read32(hcd->regs, HC_HW_MODE_CTRL); - reg_write32(hcd->regs, HC_HW_MODE_CTRL, temp | HW_GLOBAL_INTR_EN); - - command = reg_read32(hcd->regs, HC_USBCMD); - command &= ~(CMD_LRESET|CMD_RESET); - command |= CMD_RUN; - reg_write32(hcd->regs, HC_USBCMD, command); - - retval = handshake(hcd, HC_USBCMD, CMD_RUN, CMD_RUN, 250 * 1000); - if (retval) - return retval; - - /* - * XXX - * Spec says to write FLAG_CF as last config action, priv code grabs - * the semaphore while doing so. - */ - down_write(&ehci_cf_port_reset_rwsem); - reg_write32(hcd->regs, HC_CONFIGFLAG, FLAG_CF); - - retval = handshake(hcd, HC_CONFIGFLAG, FLAG_CF, FLAG_CF, 250 * 1000); - up_write(&ehci_cf_port_reset_rwsem); - if (retval) - return retval; - - chipid = reg_read32(hcd->regs, HC_CHIP_ID_REG); - dev_info(hcd->self.controller, "USB ISP %04x HW rev. %d started\n", - chipid & 0xffff, chipid >> 16); - - /* PTD Register Init Part 2, Step 28 */ - - /* Setup registers controlling PTD checking */ - reg_write32(hcd->regs, HC_ATL_PTD_LASTPTD_REG, 0x80000000); - reg_write32(hcd->regs, HC_INT_PTD_LASTPTD_REG, 0x80000000); - reg_write32(hcd->regs, HC_ISO_PTD_LASTPTD_REG, 0x00000001); - reg_write32(hcd->regs, HC_ATL_PTD_SKIPMAP_REG, 0xffffffff); - reg_write32(hcd->regs, HC_INT_PTD_SKIPMAP_REG, 0xffffffff); - reg_write32(hcd->regs, HC_ISO_PTD_SKIPMAP_REG, 0xffffffff); - reg_write32(hcd->regs, HC_BUFFER_STATUS_REG, - ATL_BUF_FILL | INT_BUF_FILL); - - /* GRR this is run-once init(), being done every time the HC starts. - * So long as they're part of class devices, we can't do it init() - * since the class device isn't created that early. - */ - return 0; -} - static u32 base_to_chip(u32 base) { return ((base - 0x400) >> 3); @@ -1326,6 +1258,74 @@ leave: return irqret; } +static int isp1760_run(struct usb_hcd *hcd) +{ + int retval; + u32 temp; + u32 command; + u32 chipid; + + hcd->uses_new_polling = 1; + + hcd->state = HC_STATE_RUNNING; + + /* Set PTD interrupt AND & OR maps */ + reg_write32(hcd->regs, HC_ATL_IRQ_MASK_AND_REG, 0); + reg_write32(hcd->regs, HC_ATL_IRQ_MASK_OR_REG, 0xffffffff); + reg_write32(hcd->regs, HC_INT_IRQ_MASK_AND_REG, 0); + reg_write32(hcd->regs, HC_INT_IRQ_MASK_OR_REG, 0xffffffff); + reg_write32(hcd->regs, HC_ISO_IRQ_MASK_AND_REG, 0); + reg_write32(hcd->regs, HC_ISO_IRQ_MASK_OR_REG, 0xffffffff); + /* step 23 passed */ + + temp = reg_read32(hcd->regs, HC_HW_MODE_CTRL); + reg_write32(hcd->regs, HC_HW_MODE_CTRL, temp | HW_GLOBAL_INTR_EN); + + command = reg_read32(hcd->regs, HC_USBCMD); + command &= ~(CMD_LRESET|CMD_RESET); + command |= CMD_RUN; + reg_write32(hcd->regs, HC_USBCMD, command); + + retval = handshake(hcd, HC_USBCMD, CMD_RUN, CMD_RUN, 250 * 1000); + if (retval) + return retval; + + /* + * XXX + * Spec says to write FLAG_CF as last config action, priv code grabs + * the semaphore while doing so. + */ + down_write(&ehci_cf_port_reset_rwsem); + reg_write32(hcd->regs, HC_CONFIGFLAG, FLAG_CF); + + retval = handshake(hcd, HC_CONFIGFLAG, FLAG_CF, FLAG_CF, 250 * 1000); + up_write(&ehci_cf_port_reset_rwsem); + if (retval) + return retval; + + chipid = reg_read32(hcd->regs, HC_CHIP_ID_REG); + dev_info(hcd->self.controller, "USB ISP %04x HW rev. %d started\n", + chipid & 0xffff, chipid >> 16); + + /* PTD Register Init Part 2, Step 28 */ + + /* Setup registers controlling PTD checking */ + reg_write32(hcd->regs, HC_ATL_PTD_LASTPTD_REG, 0x80000000); + reg_write32(hcd->regs, HC_INT_PTD_LASTPTD_REG, 0x80000000); + reg_write32(hcd->regs, HC_ISO_PTD_LASTPTD_REG, 0x00000001); + reg_write32(hcd->regs, HC_ATL_PTD_SKIPMAP_REG, 0xffffffff); + reg_write32(hcd->regs, HC_INT_PTD_SKIPMAP_REG, 0xffffffff); + reg_write32(hcd->regs, HC_ISO_PTD_SKIPMAP_REG, 0xffffffff); + reg_write32(hcd->regs, HC_BUFFER_STATUS_REG, + ATL_BUF_FILL | INT_BUF_FILL); + + /* GRR this is run-once init(), being done every time the HC starts. + * So long as they're part of class devices, we can't do it init() + * since the class device isn't created that early. + */ + return 0; +} + static int qtd_fill(struct isp1760_qtd *qtd, void *databuffer, size_t len) { qtd->data_buffer = databuffer; -- cgit v0.10.2 From 6d50c60e6d169b04b0cf0b267eb14ab0839f9540 Mon Sep 17 00:00:00 2001 From: Arvid Brodin Date: Sun, 21 Aug 2011 08:29:26 +0200 Subject: usb/isp1760: Use polling instead of SOF interrupts to fix Errata 2 Errata 2 for the isp1760 explains that the chip sometimes does not issue interrupts when an ATL (bulk or control) transfer is completed. There are several issues with the current work-around (SOF interrupts) for this: 1) It seems the chip sometimes does not even set the done bit for a completed transfer, in which case SOF interrupts does not solve the problem since we still check the done map to find out which transfer descriptors to handle. 2) The above point seems to happen only when ATL and SOF interrupts are enabled at the same time. However, disabling ATL interrupts increases the latency between transfer completion and handling. This is very noticeable in the testusb suite, which take several minutes more to run with ATL interrupts disabled. This patch removes the code to switch on SOF interrupts, and instead use a kernel timer to periodically check for "old" descriptors that have their VALID and ACTIVE flags unset, indicating completion, thus avoiding the dependency on the chip's done map (and SOF interrupts) to find transfers affected by this HW bug. [bigeasy@linutronix: 80 lines limit] Signed-off-by: Arvid Brodin Signed-off-by: Sebastian Andrzej Siewior Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/host/isp1760-hcd.c b/drivers/usb/host/isp1760-hcd.c index e399e23..14c9238 100644 --- a/drivers/usb/host/isp1760-hcd.c +++ b/drivers/usb/host/isp1760-hcd.c @@ -21,6 +21,7 @@ #include #include #include +#include #include #include @@ -39,7 +40,6 @@ struct isp1760_hcd { int int_done_map; struct memory_chunk memory_pool[BLOCKS]; struct list_head controlqhs, bulkqhs, interruptqhs; - int active_ptds; /* periodic schedule support */ #define DEFAULT_I_TDPS 1024 @@ -489,10 +489,6 @@ static int isp1760_hc_setup(struct usb_hcd *hcd) 16 : 32, (priv->devflags & ISP1760_FLAG_ANALOG_OC) ? "analog" : "digital"); - /* This is weird: at the first plug-in of a device there seems to be - one packet queued that never gets returned? */ - priv->active_ptds = -1; - /* ATL reset */ reg_write32(hcd->regs, HC_HW_MODE_CTRL, hwmode | ALL_ATX_RESET); mdelay(10); @@ -741,8 +737,8 @@ static void start_bus_transfer(struct usb_hcd *hcd, u32 ptd_offset, int slot, qh->slot = slot; qtd->status = QTD_XFER_STARTED; /* Set this before writing ptd, since interrupt routine may preempt and expects this value. */ + slots[slot].timestamp = jiffies; ptd_write(hcd->regs, ptd_offset, slot, ptd); - priv->active_ptds++; /* Make sure done map has not triggered from some unlinked transfer */ if (ptd_offset == ATL_PTD_OFFSET) { @@ -1091,11 +1087,9 @@ static int check_atl_transfer(struct usb_hcd *hcd, struct ptd *ptd, return PTD_STATE_QTD_DONE; } -static irqreturn_t isp1760_irq(struct usb_hcd *hcd) +static void handle_done_ptds(struct usb_hcd *hcd) { struct isp1760_hcd *priv = hcd_to_priv(hcd); - u32 imask; - irqreturn_t irqret = IRQ_NONE; struct ptd ptd; struct isp1760_qh *qh; int slot; @@ -1104,27 +1098,14 @@ static irqreturn_t isp1760_irq(struct usb_hcd *hcd) u32 ptd_offset; struct isp1760_qtd *qtd; int modified; - static int last_active_ptds; - int int_skip_map, atl_skip_map; - - spin_lock(&priv->lock); - - if (!(hcd->state & HC_STATE_RUNNING)) - goto leave; - - imask = reg_read32(hcd->regs, HC_INTERRUPT_REG); - if (unlikely(!imask)) - goto leave; - reg_write32(hcd->regs, HC_INTERRUPT_REG, imask); /* Clear */ + int skip_map; - int_skip_map = reg_read32(hcd->regs, HC_INT_PTD_SKIPMAP_REG); - atl_skip_map = reg_read32(hcd->regs, HC_ATL_PTD_SKIPMAP_REG); - priv->int_done_map |= reg_read32(hcd->regs, HC_INT_PTD_DONEMAP_REG); - priv->atl_done_map |= reg_read32(hcd->regs, HC_ATL_PTD_DONEMAP_REG); - priv->int_done_map &= ~int_skip_map; - priv->atl_done_map &= ~atl_skip_map; + skip_map = reg_read32(hcd->regs, HC_INT_PTD_SKIPMAP_REG); + priv->int_done_map &= ~skip_map; + skip_map = reg_read32(hcd->regs, HC_ATL_PTD_SKIPMAP_REG); + priv->atl_done_map &= ~skip_map; - modified = priv->int_done_map | priv->atl_done_map; + modified = priv->int_done_map || priv->atl_done_map; while (priv->int_done_map || priv->atl_done_map) { if (priv->int_done_map) { @@ -1163,7 +1144,6 @@ static irqreturn_t isp1760_irq(struct usb_hcd *hcd) slots[slot].qtd = NULL; qh = slots[slot].qh; slots[slot].qh = NULL; - priv->active_ptds--; qh->slot = -1; WARN_ON(qtd->status != QTD_XFER_STARTED); @@ -1234,22 +1214,28 @@ static irqreturn_t isp1760_irq(struct usb_hcd *hcd) if (modified) schedule_ptds(hcd); +} - /* ISP1760 Errata 2 explains that interrupts may be missed (or not - happen?) if two USB devices are running simultaneously. Perhaps - this happens when a PTD is finished during interrupt handling; - enable SOF interrupts if PTDs are still scheduled when exiting this - interrupt handler, just to be safe. */ +static irqreturn_t isp1760_irq(struct usb_hcd *hcd) +{ + struct isp1760_hcd *priv = hcd_to_priv(hcd); + u32 imask; + irqreturn_t irqret = IRQ_NONE; - if (priv->active_ptds != last_active_ptds) { - if (priv->active_ptds > 0) - reg_write32(hcd->regs, HC_INTERRUPT_ENABLE, - INTERRUPT_ENABLE_SOT_MASK); - else - reg_write32(hcd->regs, HC_INTERRUPT_ENABLE, - INTERRUPT_ENABLE_MASK); - last_active_ptds = priv->active_ptds; - } + spin_lock(&priv->lock); + + if (!(hcd->state & HC_STATE_RUNNING)) + goto leave; + + imask = reg_read32(hcd->regs, HC_INTERRUPT_REG); + if (unlikely(!imask)) + goto leave; + reg_write32(hcd->regs, HC_INTERRUPT_REG, imask); /* Clear */ + + priv->int_done_map |= reg_read32(hcd->regs, HC_INT_PTD_DONEMAP_REG); + priv->atl_done_map |= reg_read32(hcd->regs, HC_ATL_PTD_DONEMAP_REG); + + handle_done_ptds(hcd); irqret = IRQ_HANDLED; leave: @@ -1258,6 +1244,63 @@ leave: return irqret; } +/* + * Workaround for problem described in chip errata 2: + * + * Sometimes interrupts are not generated when ATL (not INT?) completion occurs. + * One solution suggested in the errata is to use SOF interrupts _instead_of_ + * ATL done interrupts (the "instead of" might be important since it seems + * enabling ATL interrupts also causes the chip to sometimes - rarely - "forget" + * to set the PTD's done bit in addition to not generating an interrupt!). + * + * So if we use SOF + ATL interrupts, we sometimes get stale PTDs since their + * done bit is not being set. This is bad - it blocks the endpoint until reboot. + * + * If we use SOF interrupts only, we get latency between ptd completion and the + * actual handling. This is very noticeable in testusb runs which takes several + * minutes longer without ATL interrupts. + * + * A better solution is to run the code below every SLOT_CHECK_PERIOD ms. If it + * finds active ATL slots which are older than SLOT_TIMEOUT ms, it checks the + * slot's ACTIVE and VALID bits. If these are not set, the ptd is considered + * completed and its done map bit is set. + * + * The values of SLOT_TIMEOUT and SLOT_CHECK_PERIOD have been arbitrarily chosen + * not to cause too much lag when this HW bug occurs, while still hopefully + * ensuring that the check does not falsely trigger. + */ +#define SLOT_TIMEOUT 180 +#define SLOT_CHECK_PERIOD 200 +static struct timer_list errata2_timer; + +void errata2_function(unsigned long data) +{ + struct usb_hcd *hcd = (struct usb_hcd *) data; + struct isp1760_hcd *priv = hcd_to_priv(hcd); + int slot; + struct ptd ptd; + unsigned long spinflags; + + spin_lock_irqsave(&priv->lock, spinflags); + + for (slot = 0; slot < 32; slot++) + if ((priv->atl_slots[slot].qh || priv->atl_slots[slot].qtd) && + time_after(jiffies + SLOT_TIMEOUT * HZ / 1000, + priv->atl_slots[slot].timestamp)) { + ptd_read(hcd->regs, ATL_PTD_OFFSET, slot, &ptd); + if (!FROM_DW0_VALID(ptd.dw0) && + !FROM_DW3_ACTIVE(ptd.dw3)) + priv->atl_done_map |= 1 << slot; + } + + handle_done_ptds(hcd); + + spin_unlock_irqrestore(&priv->lock, spinflags); + + errata2_timer.expires = jiffies + SLOT_CHECK_PERIOD * HZ / 1000; + add_timer(&errata2_timer); +} + static int isp1760_run(struct usb_hcd *hcd) { int retval; @@ -1303,6 +1346,12 @@ static int isp1760_run(struct usb_hcd *hcd) if (retval) return retval; + init_timer(&errata2_timer); + errata2_timer.function = errata2_function; + errata2_timer.data = (unsigned long) hcd; + errata2_timer.expires = jiffies + SLOT_CHECK_PERIOD * HZ / 1000; + add_timer(&errata2_timer); + chipid = reg_read32(hcd->regs, HC_CHIP_ID_REG); dev_info(hcd->self.controller, "USB ISP %04x HW rev. %d started\n", chipid & 0xffff, chipid >> 16); @@ -1561,7 +1610,6 @@ static void kill_transfer(struct usb_hcd *hcd, struct urb *urb, } qh->slot = -1; - priv->active_ptds--; } static int isp1760_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, @@ -2012,6 +2060,8 @@ static void isp1760_stop(struct usb_hcd *hcd) struct isp1760_hcd *priv = hcd_to_priv(hcd); u32 temp; + del_timer(&errata2_timer); + isp1760_hub_control(hcd, ClearPortFeature, USB_PORT_FEAT_POWER, 1, NULL, 0); mdelay(20); diff --git a/drivers/usb/host/isp1760-hcd.h b/drivers/usb/host/isp1760-hcd.h index 014a7df..fda0f2d 100644 --- a/drivers/usb/host/isp1760-hcd.h +++ b/drivers/usb/host/isp1760-hcd.h @@ -73,7 +73,6 @@ void deinit_kmem_cache(void); #define HC_EOT_INT (1 << 3) #define HC_SOT_INT (1 << 1) #define INTERRUPT_ENABLE_MASK (HC_INTL_INT | HC_ATL_INT) -#define INTERRUPT_ENABLE_SOT_MASK (HC_SOT_INT) #define HC_ISO_IRQ_MASK_OR_REG 0x318 #define HC_INT_IRQ_MASK_OR_REG 0x31C @@ -107,6 +106,7 @@ struct ptd { struct slotinfo { struct isp1760_qh *qh; struct isp1760_qtd *qtd; + unsigned long timestamp; }; @@ -188,6 +188,7 @@ struct memory_chunk { #define DW3_BABBLE_BIT (1 << 29) #define DW3_HALT_BIT (1 << 30) #define DW3_ACTIVE_BIT (1 << 31) +#define FROM_DW3_ACTIVE(x) (((x) >> 31) & 0x01) #define INT_UNDERRUN (1 << 2) #define INT_BABBLE (1 << 1) -- cgit v0.10.2 From 38679b720014d89b192c38d4c604f5a718b9788d Mon Sep 17 00:00:00 2001 From: Arvid Brodin Date: Sun, 21 Aug 2011 08:29:27 +0200 Subject: usb/isp1760: Fix missing endpoint unlink when no mem during enqueue ... and some small code style fixes. Signed-off-by: Arvid Brodin Signed-off-by: Sebastian Andrzej Siewior Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/host/isp1760-hcd.c b/drivers/usb/host/isp1760-hcd.c index 14c9238..1eb69e0 100644 --- a/drivers/usb/host/isp1760-hcd.c +++ b/drivers/usb/host/isp1760-hcd.c @@ -777,10 +777,7 @@ static void collect_qtds(struct usb_hcd *hcd, struct isp1760_qh *qh, if (qtd->status < QTD_XFER_COMPLETE) break; - if (list_is_last(&qtd->qtd_list, &qh->qtd_list)) - last_qtd = 1; - else - last_qtd = qtd->urb != qtd_next->urb; + last_qtd = last_qtd_of_urb(qtd, qh); if ((!last_qtd) && (qtd->status == QTD_RETIRE)) qtd_next->status = QTD_RETIRE; @@ -821,7 +818,7 @@ static void collect_qtds(struct usb_hcd *hcd, struct isp1760_qh *qh, urb_listitem = kmem_cache_zalloc(urb_listitem_cachep, GFP_ATOMIC); if (unlikely(!urb_listitem)) - break; + break; /* Try again on next call */ urb_listitem->urb = qtd->urb; list_add_tail(&urb_listitem->urb_list, urb_list); } @@ -1543,7 +1540,6 @@ static int isp1760_urb_enqueue(struct usb_hcd *hcd, struct urb *urb, packetize_urb(hcd, urb, &new_qtds, mem_flags); if (list_empty(&new_qtds)) return -ENOMEM; - urb->hcpriv = NULL; /* Used to signal unlink to interrupt handler */ retval = 0; spin_lock_irqsave(&priv->lock, spinflags); @@ -1571,6 +1567,7 @@ static int isp1760_urb_enqueue(struct usb_hcd *hcd, struct urb *urb, qh = qh_alloc(GFP_ATOMIC); if (!qh) { retval = -ENOMEM; + usb_hcd_unlink_urb_from_ep(hcd, urb); goto out; } list_add_tail(&qh->qh_list, ep_queue); -- cgit v0.10.2 From 6477acc0814fc7aadfe3d723d2596fb4eb6d1732 Mon Sep 17 00:00:00 2001 From: Arvid Brodin Date: Sun, 21 Aug 2011 08:29:28 +0200 Subject: usb/isp1760: Fix problems that trigger WARNING at line 1136. 1) A bug in the usage of time_after() in errata2_function(). 2) Clear done_maps just prior to starting a new transfer in start_bus_transfer(), instead of just after, when done_map bits might have been validly set by the started transfer. Signed-off-by: Arvid Brodin Signed-off-by: Sebastian Andrzej Siewior Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/host/isp1760-hcd.c b/drivers/usb/host/isp1760-hcd.c index 1eb69e0..11367b4 100644 --- a/drivers/usb/host/isp1760-hcd.c +++ b/drivers/usb/host/isp1760-hcd.c @@ -732,28 +732,29 @@ static void start_bus_transfer(struct usb_hcd *hcd, u32 ptd_offset, int slot, WARN_ON(slots[slot].qh); WARN_ON(qtd->status != QTD_PAYLOAD_ALLOC); - slots[slot].qtd = qtd; - slots[slot].qh = qh; - qh->slot = slot; - qtd->status = QTD_XFER_STARTED; /* Set this before writing ptd, since - interrupt routine may preempt and expects this value. */ - slots[slot].timestamp = jiffies; - ptd_write(hcd->regs, ptd_offset, slot, ptd); - /* Make sure done map has not triggered from some unlinked transfer */ if (ptd_offset == ATL_PTD_OFFSET) { priv->atl_done_map |= reg_read32(hcd->regs, HC_ATL_PTD_DONEMAP_REG); - priv->atl_done_map &= ~(1 << qh->slot); + priv->atl_done_map &= ~(1 << slot); + } else { + priv->int_done_map |= reg_read32(hcd->regs, + HC_INT_PTD_DONEMAP_REG); + priv->int_done_map &= ~(1 << slot); + } + qh->slot = slot; + qtd->status = QTD_XFER_STARTED; + slots[slot].timestamp = jiffies; + slots[slot].qtd = qtd; + slots[slot].qh = qh; + ptd_write(hcd->regs, ptd_offset, slot, ptd); + + if (ptd_offset == ATL_PTD_OFFSET) { skip_map = reg_read32(hcd->regs, HC_ATL_PTD_SKIPMAP_REG); skip_map &= ~(1 << qh->slot); reg_write32(hcd->regs, HC_ATL_PTD_SKIPMAP_REG, skip_map); } else { - priv->int_done_map |= reg_read32(hcd->regs, - HC_INT_PTD_DONEMAP_REG); - priv->int_done_map &= ~(1 << qh->slot); - skip_map = reg_read32(hcd->regs, HC_INT_PTD_SKIPMAP_REG); skip_map &= ~(1 << qh->slot); reg_write32(hcd->regs, HC_INT_PTD_SKIPMAP_REG, skip_map); @@ -1266,7 +1267,7 @@ leave: * not to cause too much lag when this HW bug occurs, while still hopefully * ensuring that the check does not falsely trigger. */ -#define SLOT_TIMEOUT 180 +#define SLOT_TIMEOUT 300 #define SLOT_CHECK_PERIOD 200 static struct timer_list errata2_timer; @@ -1281,16 +1282,17 @@ void errata2_function(unsigned long data) spin_lock_irqsave(&priv->lock, spinflags); for (slot = 0; slot < 32; slot++) - if ((priv->atl_slots[slot].qh || priv->atl_slots[slot].qtd) && - time_after(jiffies + SLOT_TIMEOUT * HZ / 1000, - priv->atl_slots[slot].timestamp)) { + if (priv->atl_slots[slot].qh && time_after(jiffies, + priv->atl_slots[slot].timestamp + + SLOT_TIMEOUT * HZ / 1000)) { ptd_read(hcd->regs, ATL_PTD_OFFSET, slot, &ptd); if (!FROM_DW0_VALID(ptd.dw0) && !FROM_DW3_ACTIVE(ptd.dw3)) priv->atl_done_map |= 1 << slot; } - handle_done_ptds(hcd); + if (priv->atl_done_map) + handle_done_ptds(hcd); spin_unlock_irqrestore(&priv->lock, spinflags); -- cgit v0.10.2 From 7a01f496c5218d98ea4542f74fccb60c23b6185c Mon Sep 17 00:00:00 2001 From: Tobias Klauser Date: Wed, 27 Jul 2011 08:57:25 +0200 Subject: usb: isp1362-hcd: Quieten printks These messages just clutter the log and provide no useful information to the user, so make them pr_debug(). Signed-off-by: Tobias Klauser Acked-by: Mike Frysinger Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/host/isp1362-hcd.c b/drivers/usb/host/isp1362-hcd.c index 9c37dad..21efca9 100644 --- a/drivers/usb/host/isp1362-hcd.c +++ b/drivers/usb/host/isp1362-hcd.c @@ -2358,7 +2358,7 @@ static int isp1362_hc_reset(struct usb_hcd *hcd) unsigned long flags; int clkrdy = 0; - pr_info("%s:\n", __func__); + pr_debug("%s:\n", __func__); if (isp1362_hcd->board && isp1362_hcd->board->reset) { isp1362_hcd->board->reset(hcd->self.controller, 1); @@ -2395,7 +2395,7 @@ static void isp1362_hc_stop(struct usb_hcd *hcd) unsigned long flags; u32 tmp; - pr_info("%s:\n", __func__); + pr_debug("%s:\n", __func__); del_timer_sync(&hcd->rh_timer); @@ -2523,7 +2523,7 @@ static int isp1362_hc_start(struct usb_hcd *hcd) u16 chipid; unsigned long flags; - pr_info("%s:\n", __func__); + pr_debug("%s:\n", __func__); spin_lock_irqsave(&isp1362_hcd->lock, flags); chipid = isp1362_read_reg16(isp1362_hcd, HCCHIPID); -- cgit v0.10.2 From 3abd7f68b28dcf6394c71c998376fc7bc92342c4 Mon Sep 17 00:00:00 2001 From: Tanmay Upadhyay Date: Wed, 20 Jul 2011 10:00:58 +0530 Subject: USB: pxa168: Add onchip USB host controller support - Add EHCI Host controller driver - Add wrapper that creates resources for host controller driver v2 - Call clk_put() after clk_disable() in probe function Signed-off-by: Tanmay Upadhyay Signed-off-by: Greg Kroah-Hartman diff --git a/arch/arm/mach-mmp/include/mach/pxa168.h b/arch/arm/mach-mmp/include/mach/pxa168.h index 7f00584..7fb568d 100644 --- a/arch/arm/mach-mmp/include/mach/pxa168.h +++ b/arch/arm/mach-mmp/include/mach/pxa168.h @@ -35,6 +35,13 @@ extern struct pxa_device_desc pxa168_device_fb; extern struct pxa_device_desc pxa168_device_keypad; extern struct pxa_device_desc pxa168_device_eth; +struct pxa168_usb_pdata { + /* If NULL, default phy init routine for PXA168 would be called */ + int (*phy_init)(void __iomem *usb_phy_reg_base); +}; +/* pdata can be NULL */ +int __init pxa168_add_usb_host(struct pxa168_usb_pdata *pdata); + static inline int pxa168_add_uart(int id) { struct pxa_device_desc *d = NULL; diff --git a/arch/arm/mach-mmp/pxa168.c b/arch/arm/mach-mmp/pxa168.c index 0156f53..b2b280c 100644 --- a/arch/arm/mach-mmp/pxa168.c +++ b/arch/arm/mach-mmp/pxa168.c @@ -25,6 +25,9 @@ #include #include #include +#include +#include +#include #include "common.h" #include "clock.h" @@ -83,6 +86,7 @@ static APBC_CLK(keypad, PXA168_KPC, 0, 32000); static APMU_CLK(nand, NAND, 0x19b, 156000000); static APMU_CLK(lcd, LCD, 0x7f, 312000000); static APMU_CLK(eth, ETH, 0x09, 0); +static APMU_CLK(usb, USB, 0x12, 0); /* device and clock bindings */ static struct clk_lookup pxa168_clkregs[] = { @@ -104,6 +108,7 @@ static struct clk_lookup pxa168_clkregs[] = { INIT_CLKREG(&clk_lcd, "pxa168-fb", NULL), INIT_CLKREG(&clk_keypad, "pxa27x-keypad", NULL), INIT_CLKREG(&clk_eth, "pxa168-eth", "MFUCLK"), + INIT_CLKREG(&clk_usb, "pxa168-ehci", "PXA168-USBCLK"), }; static int __init pxa168_init(void) @@ -169,3 +174,44 @@ PXA168_DEVICE(ssp5, "pxa168-ssp", 4, SSP5, 0xd4021000, 0x40, 60, 61); PXA168_DEVICE(fb, "pxa168-fb", -1, LCD, 0xd420b000, 0x1c8); PXA168_DEVICE(keypad, "pxa27x-keypad", -1, KEYPAD, 0xd4012000, 0x4c); PXA168_DEVICE(eth, "pxa168-eth", -1, MFU, 0xc0800000, 0x0fff); + +struct resource pxa168_usb_host_resources[] = { + /* USB Host conroller register base */ + [0] = { + .start = 0xd4209000, + .end = 0xd4209000 + 0x200, + .flags = IORESOURCE_MEM, + .name = "pxa168-usb-host", + }, + /* USB PHY register base */ + [1] = { + .start = 0xd4206000, + .end = 0xd4206000 + 0xff, + .flags = IORESOURCE_MEM, + .name = "pxa168-usb-phy", + }, + [2] = { + .start = IRQ_PXA168_USB2, + .end = IRQ_PXA168_USB2, + .flags = IORESOURCE_IRQ, + }, +}; + +static u64 pxa168_usb_host_dmamask = DMA_BIT_MASK(32); +struct platform_device pxa168_device_usb_host = { + .name = "pxa168-ehci", + .id = -1, + .dev = { + .dma_mask = &pxa168_usb_host_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, + + .num_resources = ARRAY_SIZE(pxa168_usb_host_resources), + .resource = pxa168_usb_host_resources, +}; + +int __init pxa168_add_usb_host(struct pxa168_usb_pdata *pdata) +{ + pxa168_device_usb_host.dev.platform_data = pdata; + return platform_device_register(&pxa168_device_usb_host); +} diff --git a/drivers/usb/Kconfig b/drivers/usb/Kconfig index 48f1781..7e7f42b 100644 --- a/drivers/usb/Kconfig +++ b/drivers/usb/Kconfig @@ -69,6 +69,7 @@ config USB_ARCH_HAS_EHCI default y if ARCH_MSM default y if MICROBLAZE default y if SPARC_LEON + default y if ARCH_MMP default PCI # ARM SA1111 chips have a non-PCI based "OHCI-compatible" USB host interface. diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig index ab085f1..5791fe9 100644 --- a/drivers/usb/host/Kconfig +++ b/drivers/usb/host/Kconfig @@ -578,3 +578,10 @@ config USB_OCTEON_OHCI config USB_OCTEON2_COMMON bool default y if USB_OCTEON_EHCI || USB_OCTEON_OHCI + +config USB_PXA168_EHCI + bool "Marvell PXA168 on-chip EHCI HCD support" + depends on USB_EHCI_HCD && ARCH_MMP + help + Enable support for Marvell PXA168 SoC's on-chip EHCI + host controller diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c index f72ae0b..750f60f 100644 --- a/drivers/usb/host/ehci-hcd.c +++ b/drivers/usb/host/ehci-hcd.c @@ -1291,6 +1291,11 @@ MODULE_LICENSE ("GPL"); #define PLATFORM_DRIVER ehci_grlib_driver #endif +#ifdef CONFIG_USB_PXA168_EHCI +#include "ehci-pxa168.c" +#define PLATFORM_DRIVER ehci_pxa168_driver +#endif + #if !defined(PCI_DRIVER) && !defined(PLATFORM_DRIVER) && \ !defined(PS3_SYSTEM_BUS_DRIVER) && !defined(OF_PLATFORM_DRIVER) && \ !defined(XILINX_OF_PLATFORM_DRIVER) diff --git a/drivers/usb/host/ehci-pxa168.c b/drivers/usb/host/ehci-pxa168.c new file mode 100644 index 0000000..ac0c16e --- /dev/null +++ b/drivers/usb/host/ehci-pxa168.c @@ -0,0 +1,363 @@ +/* + * drivers/usb/host/ehci-pxa168.c + * + * Tanmay Upadhyay + * + * Based on drivers/usb/host/ehci-orion.c + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include +#include +#include +#include +#include + +#define USB_PHY_CTRL_REG 0x4 +#define USB_PHY_PLL_REG 0x8 +#define USB_PHY_TX_REG 0xc + +#define FBDIV_SHIFT 4 + +#define ICP_SHIFT 12 +#define ICP_15 2 +#define ICP_20 3 +#define ICP_25 4 + +#define KVCO_SHIFT 15 + +#define PLLCALI12_SHIFT 25 +#define CALI12_VDD 0 +#define CALI12_09 1 +#define CALI12_10 2 +#define CALI12_11 3 + +#define PLLVDD12_SHIFT 27 +#define VDD12_VDD 0 +#define VDD12_10 1 +#define VDD12_11 2 +#define VDD12_12 3 + +#define PLLVDD18_SHIFT 29 +#define VDD18_19 0 +#define VDD18_20 1 +#define VDD18_21 2 +#define VDD18_22 3 + + +#define PLL_READY (1 << 23) +#define VCOCAL_START (1 << 21) +#define REG_RCAL_START (1 << 12) + +struct pxa168_usb_drv_data { + struct ehci_hcd ehci; + struct clk *pxa168_usb_clk; + struct resource *usb_phy_res; + void __iomem *usb_phy_reg_base; +}; + +static int ehci_pxa168_setup(struct usb_hcd *hcd) +{ + struct ehci_hcd *ehci = hcd_to_ehci(hcd); + int retval; + + ehci_reset(ehci); + retval = ehci_halt(ehci); + if (retval) + return retval; + + /* + * data structure init + */ + retval = ehci_init(hcd); + if (retval) + return retval; + + hcd->has_tt = 1; + + ehci_port_power(ehci, 0); + + return retval; +} + +static const struct hc_driver ehci_pxa168_hc_driver = { + .description = hcd_name, + .product_desc = "Marvell PXA168 EHCI", + .hcd_priv_size = sizeof(struct pxa168_usb_drv_data), + + /* + * generic hardware linkage + */ + .irq = ehci_irq, + .flags = HCD_MEMORY | HCD_USB2, + + /* + * basic lifecycle operations + */ + .reset = ehci_pxa168_setup, + .start = ehci_run, + .stop = ehci_stop, + .shutdown = ehci_shutdown, + + /* + * managing i/o requests and associated device resources + */ + .urb_enqueue = ehci_urb_enqueue, + .urb_dequeue = ehci_urb_dequeue, + .endpoint_disable = ehci_endpoint_disable, + .endpoint_reset = ehci_endpoint_reset, + + /* + * scheduling support + */ + .get_frame_number = ehci_get_frame, + + /* + * root hub support + */ + .hub_status_data = ehci_hub_status_data, + .hub_control = ehci_hub_control, + .bus_suspend = ehci_bus_suspend, + .bus_resume = ehci_bus_resume, + .relinquish_port = ehci_relinquish_port, + .port_handed_over = ehci_port_handed_over, + + .clear_tt_buffer_complete = ehci_clear_tt_buffer_complete, +}; + +static int pxa168_usb_phy_init(struct platform_device *pdev) +{ + struct resource *res; + void __iomem *usb_phy_reg_base; + struct pxa168_usb_pdata *pdata; + struct pxa168_usb_drv_data *drv_data; + struct usb_hcd *hcd = platform_get_drvdata(pdev); + unsigned long reg_val; + int pll_retry_cont = 10000, err = 0; + + drv_data = (struct pxa168_usb_drv_data *)hcd->hcd_priv; + pdata = (struct pxa168_usb_pdata *)pdev->dev.platform_data; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 1); + if (!res) { + dev_err(&pdev->dev, + "Found HC with no PHY register addr. Check %s setup!\n", + dev_name(&pdev->dev)); + return -ENODEV; + } + + if (!request_mem_region(res->start, resource_size(res), + ehci_pxa168_hc_driver.description)) { + dev_dbg(&pdev->dev, "controller already in use\n"); + return -EBUSY; + } + + usb_phy_reg_base = ioremap(res->start, resource_size(res)); + if (usb_phy_reg_base == NULL) { + dev_dbg(&pdev->dev, "error mapping memory\n"); + err = -EFAULT; + goto err1; + } + drv_data->usb_phy_reg_base = usb_phy_reg_base; + drv_data->usb_phy_res = res; + + /* If someone wants to init USB phy in board specific way */ + if (pdata && pdata->phy_init) + return pdata->phy_init(usb_phy_reg_base); + + /* Power up the PHY and PLL */ + writel(readl(usb_phy_reg_base + USB_PHY_CTRL_REG) | 0x3, + usb_phy_reg_base + USB_PHY_CTRL_REG); + + /* Configure PHY PLL */ + reg_val = readl(usb_phy_reg_base + USB_PHY_PLL_REG) & ~(0x7e03ffff); + reg_val |= (VDD18_22 << PLLVDD18_SHIFT | VDD12_12 << PLLVDD12_SHIFT | + CALI12_11 << PLLCALI12_SHIFT | 3 << KVCO_SHIFT | + ICP_15 << ICP_SHIFT | 0xee << FBDIV_SHIFT | 0xb); + writel(reg_val, usb_phy_reg_base + USB_PHY_PLL_REG); + + /* Make sure PHY PLL is ready */ + while (!(readl(usb_phy_reg_base + USB_PHY_PLL_REG) & PLL_READY)) { + if (!(pll_retry_cont--)) { + dev_dbg(&pdev->dev, "USB PHY PLL not ready\n"); + err = -EIO; + goto err2; + } + } + + /* Toggle VCOCAL_START bit of U2PLL for PLL calibration */ + udelay(200); + writel(readl(usb_phy_reg_base + USB_PHY_PLL_REG) | VCOCAL_START, + usb_phy_reg_base + USB_PHY_PLL_REG); + udelay(40); + writel(readl(usb_phy_reg_base + USB_PHY_PLL_REG) & ~VCOCAL_START, + usb_phy_reg_base + USB_PHY_PLL_REG); + + /* Toggle REG_RCAL_START bit of U2PTX for impedance calibration */ + udelay(400); + writel(readl(usb_phy_reg_base + USB_PHY_TX_REG) | REG_RCAL_START, + usb_phy_reg_base + USB_PHY_TX_REG); + udelay(40); + writel(readl(usb_phy_reg_base + USB_PHY_TX_REG) & ~REG_RCAL_START, + usb_phy_reg_base + USB_PHY_TX_REG); + + /* Make sure PHY PLL is ready again */ + pll_retry_cont = 0; + while (!(readl(usb_phy_reg_base + USB_PHY_PLL_REG) & PLL_READY)) { + if (!(pll_retry_cont--)) { + dev_dbg(&pdev->dev, "USB PHY PLL not ready\n"); + err = -EIO; + goto err2; + } + } + + return 0; +err2: + iounmap(usb_phy_reg_base); +err1: + release_mem_region(res->start, resource_size(res)); + return err; +} + +static int __devinit ehci_pxa168_drv_probe(struct platform_device *pdev) +{ + struct resource *res; + struct usb_hcd *hcd; + struct ehci_hcd *ehci; + struct pxa168_usb_drv_data *drv_data; + void __iomem *regs; + int irq, err = 0; + + if (usb_disabled()) + return -ENODEV; + + pr_debug("Initializing pxa168-SoC USB Host Controller\n"); + + irq = platform_get_irq(pdev, 0); + if (irq <= 0) { + dev_err(&pdev->dev, + "Found HC with no IRQ. Check %s setup!\n", + dev_name(&pdev->dev)); + err = -ENODEV; + goto err1; + } + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) { + dev_err(&pdev->dev, + "Found HC with no register addr. Check %s setup!\n", + dev_name(&pdev->dev)); + err = -ENODEV; + goto err1; + } + + if (!request_mem_region(res->start, resource_size(res), + ehci_pxa168_hc_driver.description)) { + dev_dbg(&pdev->dev, "controller already in use\n"); + err = -EBUSY; + goto err1; + } + + regs = ioremap(res->start, resource_size(res)); + if (regs == NULL) { + dev_dbg(&pdev->dev, "error mapping memory\n"); + err = -EFAULT; + goto err2; + } + + hcd = usb_create_hcd(&ehci_pxa168_hc_driver, + &pdev->dev, dev_name(&pdev->dev)); + if (!hcd) { + err = -ENOMEM; + goto err3; + } + + drv_data = (struct pxa168_usb_drv_data *)hcd->hcd_priv; + + /* Enable USB clock */ + drv_data->pxa168_usb_clk = clk_get(&pdev->dev, "PXA168-USBCLK"); + if (IS_ERR(drv_data->pxa168_usb_clk)) { + dev_err(&pdev->dev, "Couldn't get USB clock\n"); + err = PTR_ERR(drv_data->pxa168_usb_clk); + goto err4; + } + clk_enable(drv_data->pxa168_usb_clk); + + err = pxa168_usb_phy_init(pdev); + if (err) { + dev_err(&pdev->dev, "USB PHY initialization failed\n"); + goto err5; + } + + hcd->rsrc_start = res->start; + hcd->rsrc_len = resource_size(res); + hcd->regs = regs; + + ehci = hcd_to_ehci(hcd); + ehci->caps = hcd->regs + 0x100; + ehci->regs = hcd->regs + 0x100 + + HC_LENGTH(ehci_readl(ehci, &ehci->caps->hc_capbase)); + ehci->hcs_params = ehci_readl(ehci, &ehci->caps->hcs_params); + hcd->has_tt = 1; + ehci->sbrn = 0x20; + + err = usb_add_hcd(hcd, irq, IRQF_SHARED | IRQF_DISABLED); + if (err) + goto err5; + + return 0; + +err5: + clk_disable(drv_data->pxa168_usb_clk); + clk_put(drv_data->pxa168_usb_clk); +err4: + usb_put_hcd(hcd); +err3: + iounmap(regs); +err2: + release_mem_region(res->start, resource_size(res)); +err1: + dev_err(&pdev->dev, "init %s fail, %d\n", + dev_name(&pdev->dev), err); + + return err; +} + +static int __exit ehci_pxa168_drv_remove(struct platform_device *pdev) +{ + struct usb_hcd *hcd = platform_get_drvdata(pdev); + struct pxa168_usb_drv_data *drv_data = + (struct pxa168_usb_drv_data *)hcd->hcd_priv; + + usb_remove_hcd(hcd); + + /* Power down PHY & PLL */ + writel(readl(drv_data->usb_phy_reg_base + USB_PHY_CTRL_REG) & (~0x3), + drv_data->usb_phy_reg_base + USB_PHY_CTRL_REG); + + clk_disable(drv_data->pxa168_usb_clk); + clk_put(drv_data->pxa168_usb_clk); + + iounmap(hcd->regs); + release_mem_region(hcd->rsrc_start, hcd->rsrc_len); + + iounmap(drv_data->usb_phy_reg_base); + release_mem_region(drv_data->usb_phy_res->start, + resource_size(drv_data->usb_phy_res)); + + usb_put_hcd(hcd); + + return 0; +} + +MODULE_ALIAS("platform:pxa168-ehci"); + +static struct platform_driver ehci_pxa168_driver = { + .probe = ehci_pxa168_drv_probe, + .remove = __exit_p(ehci_pxa168_drv_remove), + .shutdown = usb_hcd_platform_shutdown, + .driver.name = "pxa168-ehci", +}; -- cgit v0.10.2 From 23106343db66171c94ae486d2035478ec575b228 Mon Sep 17 00:00:00 2001 From: Jayachandran C Date: Fri, 5 Aug 2011 01:28:22 +0530 Subject: usb: OHCI/EHCI support for Netlogic XLS processor. Add supprt for on-chip USB controller for Netlogic XLS MIPS64 SoC processor family. Changes are: - update ehci-hcd.c and ohci-hcd.c to add XLS hcds - add ehci-xls.c: EHCI support for Netlogic XLS. - add ohci-xls.c: OHCI support for Netlogic XLS. Signed-off-by: Jayachandran C Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c index 750f60f..2af3e2a 100644 --- a/drivers/usb/host/ehci-hcd.c +++ b/drivers/usb/host/ehci-hcd.c @@ -1296,6 +1296,11 @@ MODULE_LICENSE ("GPL"); #define PLATFORM_DRIVER ehci_pxa168_driver #endif +#ifdef CONFIG_NLM_XLR +#include "ehci-xls.c" +#define PLATFORM_DRIVER ehci_xls_driver +#endif + #if !defined(PCI_DRIVER) && !defined(PLATFORM_DRIVER) && \ !defined(PS3_SYSTEM_BUS_DRIVER) && !defined(OF_PLATFORM_DRIVER) && \ !defined(XILINX_OF_PLATFORM_DRIVER) diff --git a/drivers/usb/host/ehci-xls.c b/drivers/usb/host/ehci-xls.c new file mode 100644 index 0000000..fe74bd6 --- /dev/null +++ b/drivers/usb/host/ehci-xls.c @@ -0,0 +1,161 @@ +/* + * EHCI HCD for Netlogic XLS processors. + * + * (C) Copyright 2011 Netlogic Microsystems Inc. + * + * Based on various ehci-*.c drivers + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file COPYING in the main directory of this archive for + * more details. + */ + +#include + +static int ehci_xls_setup(struct usb_hcd *hcd) +{ + int retval; + struct ehci_hcd *ehci = hcd_to_ehci(hcd); + + ehci->caps = hcd->regs; + ehci->regs = hcd->regs + + HC_LENGTH(ehci_readl(ehci, &ehci->caps->hc_capbase)); + dbg_hcs_params(ehci, "reset"); + dbg_hcc_params(ehci, "reset"); + + /* cache this readonly data; minimize chip reads */ + ehci->hcs_params = ehci_readl(ehci, &ehci->caps->hcs_params); + + retval = ehci_halt(ehci); + if (retval) + return retval; + + /* data structure init */ + retval = ehci_init(hcd); + if (retval) + return retval; + + ehci_reset(ehci); + + return retval; +} + +int ehci_xls_probe_internal(const struct hc_driver *driver, + struct platform_device *pdev) +{ + struct usb_hcd *hcd; + struct resource *res; + int retval, irq; + + /* Get our IRQ from an earlier registered Platform Resource */ + irq = platform_get_irq(pdev, 0); + if (irq < 0) { + dev_err(&pdev->dev, "Found HC with no IRQ. Check %s setup!\n", + dev_name(&pdev->dev)); + return -ENODEV; + } + + /* Get our Memory Handle */ + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) { + dev_err(&pdev->dev, "Error: MMIO Handle %s setup!\n", + dev_name(&pdev->dev)); + return -ENODEV; + } + hcd = usb_create_hcd(driver, &pdev->dev, dev_name(&pdev->dev)); + if (!hcd) { + retval = -ENOMEM; + goto err1; + } + + hcd->rsrc_start = res->start; + hcd->rsrc_len = res->end - res->start + 1; + + if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, + driver->description)) { + dev_dbg(&pdev->dev, "controller already in use\n"); + retval = -EBUSY; + goto err2; + } + hcd->regs = ioremap_nocache(hcd->rsrc_start, hcd->rsrc_len); + + if (hcd->regs == NULL) { + dev_dbg(&pdev->dev, "error mapping memory\n"); + retval = -EFAULT; + goto err3; + } + + retval = usb_add_hcd(hcd, irq, IRQF_SHARED); + if (retval != 0) + goto err4; + return retval; + +err4: + iounmap(hcd->regs); +err3: + release_mem_region(hcd->rsrc_start, hcd->rsrc_len); +err2: + usb_put_hcd(hcd); +err1: + dev_err(&pdev->dev, "init %s fail, %d\n", dev_name(&pdev->dev), + retval); + return retval; +} + +static struct hc_driver ehci_xls_hc_driver = { + .description = hcd_name, + .product_desc = "XLS EHCI Host Controller", + .hcd_priv_size = sizeof(struct ehci_hcd), + .irq = ehci_irq, + .flags = HCD_USB2 | HCD_MEMORY, + .reset = ehci_xls_setup, + .start = ehci_run, + .stop = ehci_stop, + .shutdown = ehci_shutdown, + + .urb_enqueue = ehci_urb_enqueue, + .urb_dequeue = ehci_urb_dequeue, + .endpoint_disable = ehci_endpoint_disable, + .endpoint_reset = ehci_endpoint_reset, + + .get_frame_number = ehci_get_frame, + + .hub_status_data = ehci_hub_status_data, + .hub_control = ehci_hub_control, + .bus_suspend = ehci_bus_suspend, + .bus_resume = ehci_bus_resume, + .relinquish_port = ehci_relinquish_port, + .port_handed_over = ehci_port_handed_over, + + .clear_tt_buffer_complete = ehci_clear_tt_buffer_complete, +}; + +static int ehci_xls_probe(struct platform_device *pdev) +{ + if (usb_disabled()) + return -ENODEV; + + return ehci_xls_probe_internal(&ehci_xls_hc_driver, pdev); +} + +static int ehci_xls_remove(struct platform_device *pdev) +{ + struct usb_hcd *hcd = platform_get_drvdata(pdev); + + usb_remove_hcd(hcd); + iounmap(hcd->regs); + release_mem_region(hcd->rsrc_start, hcd->rsrc_len); + usb_put_hcd(hcd); + return 0; +} + +MODULE_ALIAS("ehci-xls"); + +static struct platform_driver ehci_xls_driver = { + .probe = ehci_xls_probe, + .remove = ehci_xls_remove, + .shutdown = usb_hcd_platform_shutdown, + .driver = { + .name = "ehci-xls", + }, +}; diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c index f9cf3f0..34efd47 100644 --- a/drivers/usb/host/ohci-hcd.c +++ b/drivers/usb/host/ohci-hcd.c @@ -1114,6 +1114,11 @@ MODULE_LICENSE ("GPL"); #define PLATFORM_DRIVER ohci_hcd_ath79_driver #endif +#ifdef CONFIG_NLM_XLR +#include "ohci-xls.c" +#define PLATFORM_DRIVER ohci_xls_driver +#endif + #if !defined(PCI_DRIVER) && \ !defined(PLATFORM_DRIVER) && \ !defined(OMAP1_PLATFORM_DRIVER) && \ diff --git a/drivers/usb/host/ohci-xls.c b/drivers/usb/host/ohci-xls.c new file mode 100644 index 0000000..a3a9c6f --- /dev/null +++ b/drivers/usb/host/ohci-xls.c @@ -0,0 +1,151 @@ +/* + * OHCI HCD for Netlogic XLS processors. + * + * (C) Copyright 2011 Netlogic Microsystems Inc. + * + * Based on ohci-au1xxx.c, and other Linux OHCI drivers. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file COPYING in the main directory of this archive for + * more details. + */ + +#include +#include + +static int ohci_xls_probe_internal(const struct hc_driver *driver, + struct platform_device *dev) +{ + struct resource *res; + struct usb_hcd *hcd; + int retval, irq; + + /* Get our IRQ from an earlier registered Platform Resource */ + irq = platform_get_irq(dev, 0); + if (irq < 0) { + dev_err(&dev->dev, "Found HC with no IRQ\n"); + return -ENODEV; + } + + /* Get our Memory Handle */ + res = platform_get_resource(dev, IORESOURCE_MEM, 0); + if (!res) { + dev_err(&dev->dev, "MMIO Handle incorrect!\n"); + return -ENODEV; + } + + hcd = usb_create_hcd(driver, &dev->dev, "XLS"); + if (!hcd) { + retval = -ENOMEM; + goto err1; + } + hcd->rsrc_start = res->start; + hcd->rsrc_len = res->end - res->start + 1; + + if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, + driver->description)) { + dev_dbg(&dev->dev, "Controller already in use\n"); + retval = -EBUSY; + goto err2; + } + + hcd->regs = ioremap_nocache(hcd->rsrc_start, hcd->rsrc_len); + if (hcd->regs == NULL) { + dev_dbg(&dev->dev, "error mapping memory\n"); + retval = -EFAULT; + goto err3; + } + + retval = usb_add_hcd(hcd, irq, IRQF_DISABLED | IRQF_SHARED); + if (retval != 0) + goto err4; + return retval; + +err4: + iounmap(hcd->regs); +err3: + release_mem_region(hcd->rsrc_start, hcd->rsrc_len); +err2: + usb_put_hcd(hcd); +err1: + dev_err(&dev->dev, "init fail, %d\n", retval); + return retval; +} + +static int ohci_xls_reset(struct usb_hcd *hcd) +{ + struct ohci_hcd *ohci = hcd_to_ohci(hcd); + + ohci_hcd_init(ohci); + return ohci_init(ohci); +} + +static int __devinit ohci_xls_start(struct usb_hcd *hcd) +{ + struct ohci_hcd *ohci; + int ret; + + ohci = hcd_to_ohci(hcd); + ret = ohci_run(ohci); + if (ret < 0) { + err("can't start %s", hcd->self.bus_name); + ohci_stop(hcd); + return ret; + } + return 0; +} + +static struct hc_driver ohci_xls_hc_driver = { + .description = hcd_name, + .product_desc = "XLS OHCI Host Controller", + .hcd_priv_size = sizeof(struct ohci_hcd), + .irq = ohci_irq, + .flags = HCD_MEMORY | HCD_USB11, + .reset = ohci_xls_reset, + .start = ohci_xls_start, + .stop = ohci_stop, + .shutdown = ohci_shutdown, + .urb_enqueue = ohci_urb_enqueue, + .urb_dequeue = ohci_urb_dequeue, + .endpoint_disable = ohci_endpoint_disable, + .get_frame_number = ohci_get_frame, + .hub_status_data = ohci_hub_status_data, + .hub_control = ohci_hub_control, +#ifdef CONFIG_PM + .bus_suspend = ohci_bus_suspend, + .bus_resume = ohci_bus_resume, +#endif + .start_port_reset = ohci_start_port_reset, +}; + +static int ohci_xls_probe(struct platform_device *dev) +{ + int ret; + + pr_debug("In ohci_xls_probe"); + if (usb_disabled()) + return -ENODEV; + ret = ohci_xls_probe_internal(&ohci_xls_hc_driver, dev); + return ret; +} + +static int ohci_xls_remove(struct platform_device *dev) +{ + struct usb_hcd *hcd = platform_get_drvdata(dev); + + usb_remove_hcd(hcd); + iounmap(hcd->regs); + release_mem_region(hcd->rsrc_start, hcd->rsrc_len); + usb_put_hcd(hcd); + return 0; +} + +static struct platform_driver ohci_xls_driver = { + .probe = ohci_xls_probe, + .remove = ohci_xls_remove, + .shutdown = usb_hcd_platform_shutdown, + .driver = { + .name = "ohci-xls-0", + .owner = THIS_MODULE, + }, +}; -- cgit v0.10.2 From 939f325f4a0fb7eb189268a4593e427d3a075514 Mon Sep 17 00:00:00 2001 From: "kuninori.morimoto.gx@renesas.com" Date: Mon, 25 Jul 2011 00:39:30 -0700 Subject: usb: add usb_endpoint_maxp() macro Signed-off-by: Kuninori Morimoto Signed-off-by: Greg Kroah-Hartman diff --git a/include/linux/usb/ch9.h b/include/linux/usb/ch9.h index 0fd3fbd..e809dea 100644 --- a/include/linux/usb/ch9.h +++ b/include/linux/usb/ch9.h @@ -34,6 +34,7 @@ #define __LINUX_USB_CH9_H #include /* __u8 etc */ +#include /* le16_to_cpu */ /*-------------------------------------------------------------------------*/ @@ -570,6 +571,17 @@ static inline int usb_endpoint_is_isoc_out( return usb_endpoint_xfer_isoc(epd) && usb_endpoint_dir_out(epd); } +/** + * usb_endpoint_maxp - get endpoint's max packet size + * @epd: endpoint to be checked + * + * Returns @epd's max packet + */ +static inline int usb_endpoint_maxp(const struct usb_endpoint_descriptor *epd) +{ + return le16_to_cpu(epd->wMaxPacketSize); +} + /*-------------------------------------------------------------------------*/ /* USB_DT_SS_ENDPOINT_COMP: SuperSpeed Endpoint Companion descriptor */ -- cgit v0.10.2 From dfd8c81fd1c09c740140a2334669994d5c6edcaa Mon Sep 17 00:00:00 2001 From: "kuninori.morimoto.gx@renesas.com" Date: Mon, 25 Jul 2011 00:39:51 -0700 Subject: usb: renesas_usbhs: use usb_endpoint_maxp() Signed-off-by: Kuninori Morimoto Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/renesas_usbhs/pipe.c b/drivers/usb/renesas_usbhs/pipe.c index 1b14cae..3bbbbb4 100644 --- a/drivers/usb/renesas_usbhs/pipe.c +++ b/drivers/usb/renesas_usbhs/pipe.c @@ -392,7 +392,7 @@ static u16 usbhsp_setup_pipemaxp(struct usbhs_pipe *pipe, /* host should set DEVSEL */ /* reutn MXPS */ - return PIPE_MAXP_MASK & le16_to_cpu(desc->wMaxPacketSize); + return PIPE_MAXP_MASK & usb_endpoint_maxp(desc); } static u16 usbhsp_setup_pipebuff(struct usbhs_pipe *pipe, -- cgit v0.10.2 From e8799906045302776b35b66b16495c575db3b69c Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Thu, 18 Aug 2011 16:31:30 -0400 Subject: USB: EHCI: remove usages of hcd->state This patch (as1483) improves the ehci-hcd driver family by getting rid of the reliance on the hcd->state variable. It has no clear owner and it isn't protected by the usual HCD locks. In its place, the patch adds a new, private ehci->rh_state field to record the state of the root hub. Along the way, the patch removes a couple of lines containing redundant assignments to the state variable. Also, the QUIESCING state simply gets changed to the RUNNING state, because the driver doesn't make any distinction between them. Signed-off-by: Alan Stern Acked-by: Jingoo Han Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/host/ehci-au1xxx.c b/drivers/usb/host/ehci-au1xxx.c index 42ae574..4363fea 100644 --- a/drivers/usb/host/ehci-au1xxx.c +++ b/drivers/usb/host/ehci-au1xxx.c @@ -293,7 +293,7 @@ static int ehci_hcd_au1xxx_drv_resume(struct device *dev) /* here we "know" root ports should always stay powered */ ehci_port_power(ehci, 1); - hcd->state = HC_STATE_SUSPENDED; + ehci->rh_state = EHCI_RH_SUSPENDED; return 0; } diff --git a/drivers/usb/host/ehci-dbg.c b/drivers/usb/host/ehci-dbg.c index 40a844c..9952505d 100644 --- a/drivers/usb/host/ehci-dbg.c +++ b/drivers/usb/host/ehci-dbg.c @@ -697,6 +697,19 @@ static ssize_t fill_periodic_buffer(struct debug_buffer *buf) } #undef DBG_SCHED_LIMIT +static const char *rh_state_string(struct ehci_hcd *ehci) +{ + switch (ehci->rh_state) { + case EHCI_RH_HALTED: + return "halted"; + case EHCI_RH_SUSPENDED: + return "suspended"; + case EHCI_RH_RUNNING: + return "running"; + } + return "?"; +} + static ssize_t fill_registers_buffer(struct debug_buffer *buf) { struct usb_hcd *hcd; @@ -730,11 +743,11 @@ static ssize_t fill_registers_buffer(struct debug_buffer *buf) temp = scnprintf (next, size, "bus %s, device %s\n" "%s\n" - "EHCI %x.%02x, hcd state %d\n", + "EHCI %x.%02x, rh state %s\n", hcd->self.controller->bus->name, dev_name(hcd->self.controller), hcd->product_desc, - i >> 8, i & 0x0ff, hcd->state); + i >> 8, i & 0x0ff, rh_state_string(ehci)); size -= temp; next += temp; diff --git a/drivers/usb/host/ehci-fsl.c b/drivers/usb/host/ehci-fsl.c index 34a3140..3bf9f16 100644 --- a/drivers/usb/host/ehci-fsl.c +++ b/drivers/usb/host/ehci-fsl.c @@ -392,7 +392,7 @@ static int ehci_fsl_mpc512x_drv_suspend(struct device *dev) dev_dbg(dev, "suspending...\n"); - hcd->state = HC_STATE_SUSPENDED; + ehci->rh_state = EHCI_RH_SUSPENDED; dev->power.power_state = PMSG_SUSPEND; /* ignore non-host interrupts */ @@ -481,7 +481,7 @@ static int ehci_fsl_mpc512x_drv_resume(struct device *dev) ehci_writel(ehci, pdata->pm_portsc, &ehci->regs->port_status[0]); set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags); - hcd->state = HC_STATE_RUNNING; + ehci->rh_state = EHCI_RH_RUNNING; dev->power.power_state = PMSG_ON; tmp = ehci_readl(ehci, &ehci->regs->command); diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c index 2af3e2a..8696489 100644 --- a/drivers/usb/host/ehci-hcd.c +++ b/drivers/usb/host/ehci-hcd.c @@ -238,7 +238,7 @@ static int handshake_on_error_set_halt(struct ehci_hcd *ehci, void __iomem *ptr, error = handshake(ehci, ptr, mask, done, usec); if (error) { ehci_halt(ehci); - ehci_to_hcd(ehci)->state = HC_STATE_HALT; + ehci->rh_state = EHCI_RH_HALTED; ehci_err(ehci, "force halt; handshake %p %08x %08x -> %d\n", ptr, mask, done, error); } @@ -278,7 +278,7 @@ static int ehci_reset (struct ehci_hcd *ehci) command |= CMD_RESET; dbg_cmd (ehci, "reset", command); ehci_writel(ehci, command, &ehci->regs->command); - ehci_to_hcd(ehci)->state = HC_STATE_HALT; + ehci->rh_state = EHCI_RH_HALTED; ehci->next_statechange = jiffies; retval = handshake (ehci, &ehci->regs->command, CMD_RESET, 0, 250 * 1000); @@ -307,7 +307,7 @@ static void ehci_quiesce (struct ehci_hcd *ehci) u32 temp; #ifdef DEBUG - if (!HC_IS_RUNNING (ehci_to_hcd(ehci)->state)) + if (ehci->rh_state != EHCI_RH_RUNNING) BUG (); #endif @@ -356,7 +356,7 @@ static void ehci_iaa_watchdog(unsigned long param) */ if (ehci->reclaim && !timer_pending(&ehci->iaa_watchdog) - && HC_IS_RUNNING(ehci_to_hcd(ehci)->state)) { + && ehci->rh_state == EHCI_RH_RUNNING) { u32 cmd, status; /* If we get here, IAA is *REALLY* late. It's barely @@ -496,7 +496,7 @@ static void ehci_work (struct ehci_hcd *ehci) * misplace IRQs, and should let us run completely without IRQs. * such lossage has been observed on both VT6202 and VT8235. */ - if (HC_IS_RUNNING (ehci_to_hcd(ehci)->state) && + if (ehci->rh_state == EHCI_RH_RUNNING && (ehci->async->qh_next.ptr != NULL || ehci->periodic_sched != 0)) timer_action (ehci, TIMER_IO_WATCHDOG); @@ -516,7 +516,7 @@ static void ehci_stop (struct usb_hcd *hcd) del_timer_sync(&ehci->iaa_watchdog); spin_lock_irq(&ehci->lock); - if (HC_IS_RUNNING (hcd->state)) + if (ehci->rh_state == EHCI_RH_RUNNING) ehci_quiesce (ehci); ehci_silence_controller(ehci); @@ -741,7 +741,7 @@ static int ehci_run (struct usb_hcd *hcd) * be started before the port switching actions could complete. */ down_write(&ehci_cf_port_reset_rwsem); - hcd->state = HC_STATE_RUNNING; + ehci->rh_state = EHCI_RH_RUNNING; ehci_writel(ehci, FLAG_CF, &ehci->regs->configured_flag); ehci_readl(ehci, &ehci->regs->command); /* unblock posted writes */ msleep(5); @@ -788,7 +788,7 @@ static irqreturn_t ehci_irq (struct usb_hcd *hcd) /* Shared IRQ? */ masked_status = status & INTR_MASK; - if (!masked_status || unlikely(hcd->state == HC_STATE_HALT)) { + if (!masked_status || unlikely(ehci->rh_state == EHCI_RH_HALTED)) { spin_unlock(&ehci->lock); return IRQ_NONE; } @@ -952,7 +952,7 @@ static int ehci_urb_enqueue ( static void unlink_async (struct ehci_hcd *ehci, struct ehci_qh *qh) { /* failfast */ - if (!HC_IS_RUNNING(ehci_to_hcd(ehci)->state) && ehci->reclaim) + if (ehci->rh_state != EHCI_RH_RUNNING && ehci->reclaim) end_unlink_async(ehci); /* If the QH isn't linked then there's nothing we can do @@ -1079,7 +1079,7 @@ rescan: goto idle_timeout; } - if (!HC_IS_RUNNING (hcd->state)) + if (ehci->rh_state != EHCI_RH_RUNNING) qh->qh_state = QH_STATE_IDLE; switch (qh->qh_state) { case QH_STATE_LINKED: diff --git a/drivers/usb/host/ehci-hub.c b/drivers/usb/host/ehci-hub.c index e051b30..c6104c4 100644 --- a/drivers/usb/host/ehci-hub.c +++ b/drivers/usb/host/ehci-hub.c @@ -236,10 +236,8 @@ static int ehci_bus_suspend (struct usb_hcd *hcd) } /* stop schedules, clean any completed work */ - if (HC_IS_RUNNING(hcd->state)) { + if (ehci->rh_state == EHCI_RH_RUNNING) ehci_quiesce (ehci); - hcd->state = HC_STATE_QUIESCING; - } ehci->command = ehci_readl(ehci, &ehci->regs->command); ehci_work(ehci); @@ -313,7 +311,7 @@ static int ehci_bus_suspend (struct usb_hcd *hcd) /* turn off now-idle HC */ ehci_halt (ehci); - hcd->state = HC_STATE_SUSPENDED; + ehci->rh_state = EHCI_RH_SUSPENDED; if (ehci->reclaim) end_unlink_async(ehci); @@ -382,6 +380,7 @@ static int ehci_bus_resume (struct usb_hcd *hcd) /* restore CMD_RUN, framelist size, and irq threshold */ ehci_writel(ehci, ehci->command, &ehci->regs->command); + ehci->rh_state = EHCI_RH_RUNNING; /* Some controller/firmware combinations need a delay during which * they set up the port statuses. See Bugzilla #8190. */ @@ -452,7 +451,6 @@ static int ehci_bus_resume (struct usb_hcd *hcd) } ehci->next_statechange = jiffies + msecs_to_jiffies(5); - hcd->state = HC_STATE_RUNNING; /* Now we can safely re-enable irqs */ ehci_writel(ehci, INTR_MASK, &ehci->regs->intr_enable); @@ -564,7 +562,7 @@ ehci_hub_status_data (struct usb_hcd *hcd, char *buf) u32 ppcd = 0; /* if !USB_SUSPEND, root hub timers won't get shut down ... */ - if (!HC_IS_RUNNING(hcd->state)) + if (ehci->rh_state != EHCI_RH_RUNNING) return 0; /* init status to no-changes */ diff --git a/drivers/usb/host/ehci-pci.c b/drivers/usb/host/ehci-pci.c index 1102ce6..8311de7 100644 --- a/drivers/usb/host/ehci-pci.c +++ b/drivers/usb/host/ehci-pci.c @@ -439,7 +439,7 @@ static int ehci_pci_resume(struct usb_hcd *hcd, bool hibernated) /* here we "know" root ports should always stay powered */ ehci_port_power(ehci, 1); - hcd->state = HC_STATE_SUSPENDED; + ehci->rh_state = EHCI_RH_SUSPENDED; return 0; } #endif diff --git a/drivers/usb/host/ehci-q.c b/drivers/usb/host/ehci-q.c index 0917e3a..6ce0b3a 100644 --- a/drivers/usb/host/ehci-q.c +++ b/drivers/usb/host/ehci-q.c @@ -153,7 +153,7 @@ static void ehci_clear_tt_buffer_complete(struct usb_hcd *hcd, spin_lock_irqsave(&ehci->lock, flags); qh->clearing_tt = 0; if (qh->qh_state == QH_STATE_IDLE && !list_empty(&qh->qtd_list) - && HC_IS_RUNNING(hcd->state)) + && ehci->rh_state == EHCI_RH_RUNNING) qh_link_async(ehci, qh); spin_unlock_irqrestore(&ehci->lock, flags); } @@ -425,7 +425,7 @@ qh_completions (struct ehci_hcd *ehci, struct ehci_qh *qh) /* stop scanning when we reach qtds the hc is using */ } else if (likely (!stopped - && HC_IS_RUNNING (ehci_to_hcd(ehci)->state))) { + && ehci->rh_state == EHCI_RH_RUNNING)) { break; /* scan the whole queue for unlinks whenever it stops */ @@ -433,7 +433,7 @@ qh_completions (struct ehci_hcd *ehci, struct ehci_qh *qh) stopped = 1; /* cancel everything if we halt, suspend, etc */ - if (!HC_IS_RUNNING(ehci_to_hcd(ehci)->state)) + if (ehci->rh_state != EHCI_RH_RUNNING) last_status = -ESHUTDOWN; /* this qtd is active; skip it unless a previous qtd @@ -977,9 +977,8 @@ static void qh_link_async (struct ehci_hcd *ehci, struct ehci_qh *qh) /* in case a clear of CMD_ASE didn't take yet */ (void)handshake(ehci, &ehci->regs->status, STS_ASS, 0, 150); - cmd |= CMD_ASE | CMD_RUN; + cmd |= CMD_ASE; ehci_writel(ehci, cmd, &ehci->regs->command); - ehci_to_hcd(ehci)->state = HC_STATE_RUNNING; /* posted write need not be known to HC yet ... */ } } @@ -1168,14 +1167,13 @@ static void end_unlink_async (struct ehci_hcd *ehci) qh_completions (ehci, qh); - if (!list_empty (&qh->qtd_list) - && HC_IS_RUNNING (ehci_to_hcd(ehci)->state)) + if (!list_empty(&qh->qtd_list) && ehci->rh_state == EHCI_RH_RUNNING) { qh_link_async (ehci, qh); - else { + } else { /* it's not free to turn the async schedule on/off; leave it * active but idle for a while once it empties. */ - if (HC_IS_RUNNING (ehci_to_hcd(ehci)->state) + if (ehci->rh_state == EHCI_RH_RUNNING && ehci->async->qh_next.qh == NULL) timer_action (ehci, TIMER_ASYNC_OFF); } @@ -1211,7 +1209,7 @@ static void start_unlink_async (struct ehci_hcd *ehci, struct ehci_qh *qh) /* stop async schedule right now? */ if (unlikely (qh == ehci->async)) { /* can't get here without STS_ASS set */ - if (ehci_to_hcd(ehci)->state != HC_STATE_HALT + if (ehci->rh_state != EHCI_RH_HALTED && !ehci->reclaim) { /* ... and CMD_IAAD clear */ ehci_writel(ehci, cmd & ~CMD_ASE, @@ -1237,7 +1235,7 @@ static void start_unlink_async (struct ehci_hcd *ehci, struct ehci_qh *qh) wmb (); /* If the controller isn't running, we don't have to wait for it */ - if (unlikely(!HC_IS_RUNNING(ehci_to_hcd(ehci)->state))) { + if (unlikely(ehci->rh_state != EHCI_RH_RUNNING)) { /* if (unlikely (qh->reclaim != 0)) * this will recurse, probably not much */ @@ -1260,7 +1258,7 @@ static void scan_async (struct ehci_hcd *ehci) enum ehci_timer_action action = TIMER_IO_WATCHDOG; timer_action_done (ehci, TIMER_ASYNC_SHRINK); - stopped = !HC_IS_RUNNING(ehci_to_hcd(ehci)->state); + stopped = (ehci->rh_state != EHCI_RH_RUNNING); ehci->qh_scan_next = ehci->async->qh_next.qh; while (ehci->qh_scan_next) { diff --git a/drivers/usb/host/ehci-s5p.c b/drivers/usb/host/ehci-s5p.c index b3958b3..318e0c6 100644 --- a/drivers/usb/host/ehci-s5p.c +++ b/drivers/usb/host/ehci-s5p.c @@ -269,7 +269,7 @@ static int s5p_ehci_resume(struct device *dev) /* here we "know" root ports should always stay powered */ ehci_port_power(ehci, 1); - hcd->state = HC_STATE_SUSPENDED; + ehci->rh_state = EHCI_RH_SUSPENDED; return 0; } diff --git a/drivers/usb/host/ehci-sched.c b/drivers/usb/host/ehci-sched.c index 2abf854..488151b 100644 --- a/drivers/usb/host/ehci-sched.c +++ b/drivers/usb/host/ehci-sched.c @@ -479,7 +479,6 @@ static int enable_periodic (struct ehci_hcd *ehci) cmd = ehci_readl(ehci, &ehci->regs->command) | CMD_PSE; ehci_writel(ehci, cmd, &ehci->regs->command); /* posted write ... PSS happens later */ - ehci_to_hcd(ehci)->state = HC_STATE_RUNNING; /* make sure ehci_work scans these */ ehci->next_uframe = ehci_readl(ehci, &ehci->regs->frame_index) @@ -677,7 +676,7 @@ static void intr_deschedule (struct ehci_hcd *ehci, struct ehci_qh *qh) /* reschedule QH iff another request is queued */ if (!list_empty(&qh->qtd_list) && - HC_IS_RUNNING(ehci_to_hcd(ehci)->state)) { + ehci->rh_state == EHCI_RH_RUNNING) { rc = qh_schedule(ehci, qh); /* An error here likely indicates handshake failure @@ -2275,7 +2274,7 @@ scan_periodic (struct ehci_hcd *ehci) * Touches as few pages as possible: cache-friendly. */ now_uframe = ehci->next_uframe; - if (HC_IS_RUNNING(ehci_to_hcd(ehci)->state)) { + if (ehci->rh_state == EHCI_RH_RUNNING) { clock = ehci_readl(ehci, &ehci->regs->frame_index); clock_frame = (clock >> 3) & (ehci->periodic_size - 1); } else { @@ -2310,7 +2309,7 @@ restart: union ehci_shadow temp; int live; - live = HC_IS_RUNNING (ehci_to_hcd(ehci)->state); + live = (ehci->rh_state == EHCI_RH_RUNNING); switch (hc32_to_cpu(ehci, type)) { case Q_TYPE_QH: /* handle any completions */ @@ -2435,7 +2434,7 @@ restart: * We can't advance our scan without collecting the ISO * transfers that are still pending in this frame. */ - if (incomplete && HC_IS_RUNNING(ehci_to_hcd(ehci)->state)) { + if (incomplete && ehci->rh_state == EHCI_RH_RUNNING) { ehci->next_uframe = now_uframe; break; } @@ -2451,7 +2450,7 @@ restart: if (now_uframe == clock) { unsigned now; - if (!HC_IS_RUNNING (ehci_to_hcd(ehci)->state) + if (ehci->rh_state != EHCI_RH_RUNNING || ehci->periodic_sched == 0) break; ehci->next_uframe = now_uframe; diff --git a/drivers/usb/host/ehci.h b/drivers/usb/host/ehci.h index cc7d337..c161d97 100644 --- a/drivers/usb/host/ehci.h +++ b/drivers/usb/host/ehci.h @@ -62,6 +62,12 @@ struct ehci_stats { #define EHCI_MAX_ROOT_PORTS 15 /* see HCS_N_PORTS */ +enum ehci_rh_state { + EHCI_RH_HALTED, + EHCI_RH_SUSPENDED, + EHCI_RH_RUNNING +}; + struct ehci_hcd { /* one per controller */ /* glue to PCI and HCD framework */ struct ehci_caps __iomem *caps; @@ -70,6 +76,7 @@ struct ehci_hcd { /* one per controller */ __u32 hcs_params; /* cached register copy */ spinlock_t lock; + enum ehci_rh_state rh_state; /* async schedule support */ struct ehci_qh *async; -- cgit v0.10.2 From da6819dbffb34861b79d91c05c4eeb37a3792433 Mon Sep 17 00:00:00 2001 From: Sebastian Andrzej Siewior Date: Fri, 19 Aug 2011 18:10:56 +0300 Subject: usb: ch9: add function defines from ch9, USB 3.0 spec not to confuse with Table 9-7 in USB 2.0 spec Signed-off-by: Sebastian Andrzej Siewior Signed-off-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman diff --git a/include/linux/usb/ch9.h b/include/linux/usb/ch9.h index e809dea..1ded281 100644 --- a/include/linux/usb/ch9.h +++ b/include/linux/usb/ch9.h @@ -144,6 +144,11 @@ #define USB_INTRF_FUNC_SUSPEND 0 /* function suspend */ #define USB_INTR_FUNC_SUSPEND_OPT_MASK 0xFF00 +/* + * Suspend Options, Table 9-7 USB 3.0 spec + */ +#define USB_INTRF_FUNC_SUSPEND_LP (1 << (8 + 0)) +#define USB_INTRF_FUNC_SUSPEND_RW (1 << (8 + 1)) #define USB_ENDPOINT_HALT 0 /* IN/OUT will STALL */ -- cgit v0.10.2 From 500fdf8becb9c8d51970c7ac6a4fa308a5481ebe Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Fri, 19 Aug 2011 18:10:57 +0300 Subject: usb: gadget: introduce gadget_is_dwc3() ... to check whether we're running on DesignWare USB3 DRD Controller. Signed-off-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/gadget/gadget_chips.h b/drivers/usb/gadget/gadget_chips.h index f3a83cd..a8855d0 100644 --- a/drivers/usb/gadget/gadget_chips.h +++ b/drivers/usb/gadget/gadget_chips.h @@ -31,6 +31,7 @@ #define gadget_is_ci13xxx_msm(g) (!strcmp("ci13xxx_msm", (g)->name)) #define gadget_is_ci13xxx_pci(g) (!strcmp("ci13xxx_pci", (g)->name)) #define gadget_is_dummy(g) (!strcmp("dummy_udc", (g)->name)) +#define gadget_is_dwc3(g) (!strcmp("dwc3-gadget", (g)->name)) #define gadget_is_fsl_qe(g) (!strcmp("fsl_qe_udc", (g)->name)) #define gadget_is_fsl_usb2(g) (!strcmp("fsl-usb2-udc", (g)->name)) #define gadget_is_goku(g) (!strcmp("goku_udc", (g)->name)) @@ -115,6 +116,8 @@ static inline int usb_gadget_controller_number(struct usb_gadget *gadget) return 0x30; else if (gadget_is_net2272(gadget)) return 0x31; + else if (gadget_is_dwc3(gadget)) + return 0x32; return -ENOENT; } -- cgit v0.10.2 From 72246da40f3719af3bfd104a2365b32537c27d83 Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Fri, 19 Aug 2011 18:10:58 +0300 Subject: usb: Introduce DesignWare USB3 DRD Driver The DesignWare USB3 is a highly configurable IP Core which can be instantiated as Dual-Role Device (DRD), Peripheral Only and Host Only (XHCI) configurations. Several other parameters can be configured like amount of FIFO space, amount of TX and RX endpoints, amount of Host Interrupters, etc. The current driver has been validated with a virtual model of version 1.73a of that core and with an FPGA burned with version 1.83a of the DRD core. We have support for PCIe bus, which is used on FPGA prototyping, and for the OMAP5, more adaptation (or glue) layers can be easily added and the driver is half prepared to handle any possible configuration the HW engineer has chosen considering we have the information on one of the GHWPARAMS registers to do runtime checking of certain features. More runtime checks can, and should, be added in order to make this driver even more flexible with regards to number of endpoints, FIFO sizes, transfer types, etc. While this supports only the device side, for now, we will add support for Host side (xHCI - see the updated series Sebastian has sent [1]) and OTG after we have it all stabilized. [1] http://marc.info/?l=linux-usb&m=131341992020339&w=2 Signed-off-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman diff --git a/Documentation/usb/dwc3.txt b/Documentation/usb/dwc3.txt new file mode 100644 index 0000000..2f65853 --- /dev/null +++ b/Documentation/usb/dwc3.txt @@ -0,0 +1,53 @@ + + TODO +~~~~~~ +Please pick something while reading :) + +- Implement streaming support for BULK endpoints + Tatyana's patch "usb: Add streams support to the gadget framework" + introduces streaming support for the gadget driver. + Every usb_request has new field called stream_id which holds its id. + Every usb_ep has a field num_supported_strms which describes the max + number of streams supported (for this ep). + UAS is AFAIK the only gadget with streaming support. + +- Convert interrupt handler to per-ep-thread-irq + + As it turns out some DWC3-commands ~1ms to complete. Currently we spin + until the command completes which is bad. + + Implementation idea: + - dwc core implements a demultiplexing irq chip for interrupts per + endpoint. The interrupt numbers are allocated during probe and belong + to the device. If MSI provides per-endpoint interrupt this dummy + interrupt chip can be replaced with "real" interrupts. + - interrupts are requested / allocated on usb_ep_enable() and removed on + usb_ep_disable(). Worst case are 32 interrupts, the lower limit is two + for ep0/1. + - dwc3_send_gadget_ep_cmd() will sleep in wait_for_completion_timeout() + until the command completes. + - the interrupt handler is split into the following pieces: + - primary handler of the device + goes through every event and calls generic_handle_irq() for event + it. On return from generic_handle_irq() in acknowledges the event + counter so interrupt goes away (eventually). + + - threaded handler of the device + none + + - primary handler of the EP-interrupt + reads the event and tries to process it. Everything that requries + sleeping is handed over to the Thread. The event is saved in an + per-endpoint data-structure. + We probably have to pay attention not to process events once we + handed something to thread so we don't process event X prio Y + where X > Y. + + - threaded handler of the EP-interrupt + handles the remaining EP work which might sleep such as waiting + for command completion. + + Latency: + There should be no increase in latency since the interrupt-thread has a + high priority and will be run before an average task in user land + (except the user changed priorities). diff --git a/drivers/usb/Kconfig b/drivers/usb/Kconfig index 7e7f42b..2651852 100644 --- a/drivers/usb/Kconfig +++ b/drivers/usb/Kconfig @@ -111,6 +111,8 @@ config USB source "drivers/usb/core/Kconfig" +source "drivers/usb/dwc3/Kconfig" + source "drivers/usb/mon/Kconfig" source "drivers/usb/wusbcore/Kconfig" diff --git a/drivers/usb/Makefile b/drivers/usb/Makefile index 30ddf8d..969b0a5 100644 --- a/drivers/usb/Makefile +++ b/drivers/usb/Makefile @@ -6,6 +6,8 @@ obj-$(CONFIG_USB) += core/ +obj-$(CONFIG_USB_DWC3) += dwc3/ + obj-$(CONFIG_USB_MON) += mon/ obj-$(CONFIG_PCI) += host/ diff --git a/drivers/usb/dwc3/Kconfig b/drivers/usb/dwc3/Kconfig new file mode 100644 index 0000000..3c1d67d --- /dev/null +++ b/drivers/usb/dwc3/Kconfig @@ -0,0 +1,25 @@ +config USB_DWC3 + tristate "DesignWare USB3 DRD Core Support" + depends on (USB || USB_GADGET) + select USB_OTG_UTILS + help + Say Y or M here if your system has a Dual Role SuperSpeed + USB controller based on the DesignWare USB3 IP Core. + + If you choose to build this driver is a dynamically linked + module, the module will be called dwc3.ko. + +if USB_DWC3 + +config USB_DWC3_DEBUG + bool "Enable Debugging Messages" + help + Say Y here to enable debugging messages on DWC3 Driver. + +config USB_DWC3_VERBOSE + bool "Enable Verbose Debugging Messages" + depends on USB_DWC3_DEBUG + help + Say Y here to enable verbose debugging messages on DWC3 Driver. + +endif diff --git a/drivers/usb/dwc3/Makefile b/drivers/usb/dwc3/Makefile new file mode 100644 index 0000000..593d1db --- /dev/null +++ b/drivers/usb/dwc3/Makefile @@ -0,0 +1,36 @@ +ccflags-$(CONFIG_USB_DWC3_DEBUG) := -DDEBUG +ccflags-$(CONFIG_USB_DWC3_VERBOSE) += -DVERBOSE_DEBUG + +obj-$(CONFIG_USB_DWC3) += dwc3.o + +dwc3-y := core.o + +ifneq ($(CONFIG_USB_GADGET_DWC3),) + dwc3-y += gadget.o ep0.o +endif + +ifneq ($(CONFIG_DEBUG_FS),) + dwc3-y += debugfs.o +endif + +## +# Platform-specific glue layers go here +# +# NOTICE: Make sure your glue layer doesn't depend on anything +# which is arch-specific and that it compiles on all situations. +# +# We want to keep this requirement in order to be able to compile +# the entire driver (with all its glue layers) on several architectures +# and make sure it compiles fine. This will also help with allmodconfig +# and allyesconfig builds. +# +# The only exception is the PCI glue layer, but that's only because +# PCI doesn't provide nops if CONFIG_PCI isn't enabled. +## + +obj-$(CONFIG_USB_DWC3) += dwc3-omap.o + +ifneq ($(CONFIG_PCI),) + obj-$(CONFIG_USB_DWC3) += dwc3-pci.o +endif + diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c new file mode 100644 index 0000000..443e4fb --- /dev/null +++ b/drivers/usb/dwc3/core.c @@ -0,0 +1,467 @@ +/** + * core.c - DesignWare USB3 DRD Controller Core file + * + * Copyright (C) 2010-2011 Texas Instruments Incorporated - http://www.ti.com + * All rights reserved. + * + * Authors: Felipe Balbi , + * Sebastian Andrzej Siewior + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions, and the following disclaimer, + * without modification. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. The names of the above-listed copyright holders may not be used + * to endorse or promote products derived from this software without + * specific prior written permission. + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") version 2, as published by the Free + * Software Foundation. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS + * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, + * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR + * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR + * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, + * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, + * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR + * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF + * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING + * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +#include "core.h" +#include "gadget.h" +#include "io.h" + +#include "debug.h" + +/** + * dwc3_core_soft_reset - Issues core soft reset and PHY reset + * @dwc: pointer to our context structure + */ +static void dwc3_core_soft_reset(struct dwc3 *dwc) +{ + u32 reg; + + /* Before Resetting PHY, put Core in Reset */ + reg = dwc3_readl(dwc->regs, DWC3_GCTL); + reg |= DWC3_GCTL_CORESOFTRESET; + dwc3_writel(dwc->regs, DWC3_GCTL, reg); + + /* Assert USB3 PHY reset */ + reg = dwc3_readl(dwc->regs, DWC3_GUSB3PIPECTL(0)); + reg |= DWC3_GUSB3PIPECTL_PHYSOFTRST; + dwc3_writel(dwc->regs, DWC3_GUSB3PIPECTL(0), reg); + + /* Assert USB2 PHY reset */ + reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0)); + reg |= DWC3_GUSB2PHYCFG_PHYSOFTRST; + dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), reg); + + mdelay(100); + + /* Clear USB3 PHY reset */ + reg = dwc3_readl(dwc->regs, DWC3_GUSB3PIPECTL(0)); + reg &= ~DWC3_GUSB3PIPECTL_PHYSOFTRST; + dwc3_writel(dwc->regs, DWC3_GUSB3PIPECTL(0), reg); + + /* Clear USB2 PHY reset */ + reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0)); + reg &= ~DWC3_GUSB2PHYCFG_PHYSOFTRST; + dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), reg); + + /* After PHYs are stable we can take Core out of reset state */ + reg = dwc3_readl(dwc->regs, DWC3_GCTL); + reg &= ~DWC3_GCTL_CORESOFTRESET; + dwc3_writel(dwc->regs, DWC3_GCTL, reg); +} + +/** + * dwc3_free_one_event_buffer - Frees one event buffer + * @dwc: Pointer to our controller context structure + * @evt: Pointer to event buffer to be freed + */ +static void dwc3_free_one_event_buffer(struct dwc3 *dwc, + struct dwc3_event_buffer *evt) +{ + dma_free_coherent(dwc->dev, evt->length, evt->buf, evt->dma); + kfree(evt); +} + +/** + * dwc3_alloc_one_event_buffer - Allocated one event buffer structure + * @dwc: Pointer to our controller context structure + * @length: size of the event buffer + * + * Returns a pointer to the allocated event buffer structure on succes + * otherwise ERR_PTR(errno). + */ +static struct dwc3_event_buffer *__devinit +dwc3_alloc_one_event_buffer(struct dwc3 *dwc, unsigned length) +{ + struct dwc3_event_buffer *evt; + + evt = kzalloc(sizeof(*evt), GFP_KERNEL); + if (!evt) + return ERR_PTR(-ENOMEM); + + evt->dwc = dwc; + evt->length = length; + evt->buf = dma_alloc_coherent(dwc->dev, length, + &evt->dma, GFP_KERNEL); + if (!evt->buf) { + kfree(evt); + return ERR_PTR(-ENOMEM); + } + + return evt; +} + +/** + * dwc3_free_event_buffers - frees all allocated event buffers + * @dwc: Pointer to our controller context structure + */ +static void dwc3_free_event_buffers(struct dwc3 *dwc) +{ + struct dwc3_event_buffer *evt; + int i; + + for (i = 0; i < DWC3_EVENT_BUFFERS_NUM; i++) { + evt = dwc->ev_buffs[i]; + if (evt) { + dwc3_free_one_event_buffer(dwc, evt); + dwc->ev_buffs[i] = NULL; + } + } +} + +/** + * dwc3_alloc_event_buffers - Allocates @num event buffers of size @length + * @dwc: Pointer to out controller context structure + * @num: number of event buffers to allocate + * @length: size of event buffer + * + * Returns 0 on success otherwise negative errno. In error the case, dwc + * may contain some buffers allocated but not all which were requested. + */ +static int __devinit dwc3_alloc_event_buffers(struct dwc3 *dwc, unsigned num, + unsigned length) +{ + int i; + + for (i = 0; i < num; i++) { + struct dwc3_event_buffer *evt; + + evt = dwc3_alloc_one_event_buffer(dwc, length); + if (IS_ERR(evt)) { + dev_err(dwc->dev, "can't allocate event buffer\n"); + return PTR_ERR(evt); + } + dwc->ev_buffs[i] = evt; + } + + return 0; +} + +/** + * dwc3_event_buffers_setup - setup our allocated event buffers + * @dwc: Pointer to out controller context structure + * + * Returns 0 on success otherwise negative errno. + */ +static int __devinit dwc3_event_buffers_setup(struct dwc3 *dwc) +{ + struct dwc3_event_buffer *evt; + int n; + + for (n = 0; n < DWC3_EVENT_BUFFERS_NUM; n++) { + evt = dwc->ev_buffs[n]; + dev_dbg(dwc->dev, "Event buf %p dma %08llx length %d\n", + evt->buf, (unsigned long long) evt->dma, + evt->length); + + dwc3_writel(dwc->regs, DWC3_GEVNTADRLO(n), + lower_32_bits(evt->dma)); + dwc3_writel(dwc->regs, DWC3_GEVNTADRHI(n), + upper_32_bits(evt->dma)); + dwc3_writel(dwc->regs, DWC3_GEVNTSIZ(n), + evt->length & 0xffff); + dwc3_writel(dwc->regs, DWC3_GEVNTCOUNT(n), 0); + } + + return 0; +} + +static void dwc3_event_buffers_cleanup(struct dwc3 *dwc) +{ + struct dwc3_event_buffer *evt; + int n; + + for (n = 0; n < DWC3_EVENT_BUFFERS_NUM; n++) { + evt = dwc->ev_buffs[n]; + dwc3_writel(dwc->regs, DWC3_GEVNTADRLO(n), 0); + dwc3_writel(dwc->regs, DWC3_GEVNTADRHI(n), 0); + dwc3_writel(dwc->regs, DWC3_GEVNTSIZ(n), 0); + dwc3_writel(dwc->regs, DWC3_GEVNTCOUNT(n), 0); + } +} + +/** + * dwc3_core_init - Low-level initialization of DWC3 Core + * @dwc: Pointer to our controller context structure + * + * Returns 0 on success otherwise negative errno. + */ +static int __devinit dwc3_core_init(struct dwc3 *dwc) +{ + unsigned long timeout; + u32 reg; + int ret; + + dwc3_core_soft_reset(dwc); + + /* issue device SoftReset too */ + timeout = jiffies + msecs_to_jiffies(500); + dwc3_writel(dwc->regs, DWC3_DCTL, DWC3_DCTL_CSFTRST); + do { + reg = dwc3_readl(dwc->regs, DWC3_DCTL); + if (!(reg & DWC3_DCTL_CSFTRST)) + break; + + if (time_after(jiffies, timeout)) { + dev_err(dwc->dev, "Reset Timed Out\n"); + ret = -ETIMEDOUT; + goto err0; + } + + cpu_relax(); + } while (true); + + reg = dwc3_readl(dwc->regs, DWC3_GSNPSID); + /* This should read as U3 followed by revision number */ + if ((reg & DWC3_GSNPSID_MASK) != 0x55330000) { + dev_err(dwc->dev, "this is not a DesignWare USB3 DRD Core\n"); + ret = -ENODEV; + goto err0; + } + + dwc->revision = reg & DWC3_GSNPSREV_MASK; + + ret = dwc3_alloc_event_buffers(dwc, DWC3_EVENT_BUFFERS_NUM, + DWC3_EVENT_BUFFERS_SIZE); + if (ret) { + dev_err(dwc->dev, "failed to allocate event buffers\n"); + ret = -ENOMEM; + goto err1; + } + + ret = dwc3_event_buffers_setup(dwc); + if (ret) { + dev_err(dwc->dev, "failed to setup event buffers\n"); + goto err1; + } + + return 0; + +err1: + dwc3_free_event_buffers(dwc); + +err0: + return ret; +} + +static void dwc3_core_exit(struct dwc3 *dwc) +{ + dwc3_event_buffers_cleanup(dwc); + dwc3_free_event_buffers(dwc); +} + +#define DWC3_ALIGN_MASK (16 - 1) + +static int __devinit dwc3_probe(struct platform_device *pdev) +{ + const struct platform_device_id *id = platform_get_device_id(pdev); + struct resource *res; + struct dwc3 *dwc; + void __iomem *regs; + unsigned int features = id->driver_data; + int ret = -ENOMEM; + int irq; + void *mem; + + mem = kzalloc(sizeof(*dwc) + DWC3_ALIGN_MASK, GFP_KERNEL); + if (!mem) { + dev_err(&pdev->dev, "not enough memory\n"); + goto err0; + } + dwc = PTR_ALIGN(mem, DWC3_ALIGN_MASK + 1); + dwc->mem = mem; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) { + dev_err(&pdev->dev, "missing resource\n"); + goto err1; + } + + res = request_mem_region(res->start, resource_size(res), + dev_name(&pdev->dev)); + if (!res) { + dev_err(&pdev->dev, "can't request mem region\n"); + goto err1; + } + + regs = ioremap(res->start, resource_size(res)); + if (!regs) { + dev_err(&pdev->dev, "ioremap failed\n"); + goto err2; + } + + irq = platform_get_irq(pdev, 0); + if (irq < 0) { + dev_err(&pdev->dev, "missing IRQ\n"); + goto err3; + } + + spin_lock_init(&dwc->lock); + platform_set_drvdata(pdev, dwc); + + dwc->regs = regs; + dwc->regs_size = resource_size(res); + dwc->dev = &pdev->dev; + dwc->irq = irq; + + pm_runtime_enable(&pdev->dev); + pm_runtime_get_sync(&pdev->dev); + pm_runtime_forbid(&pdev->dev); + + ret = dwc3_core_init(dwc); + if (ret) { + dev_err(&pdev->dev, "failed to initialize core\n"); + goto err3; + } + + if (features & DWC3_HAS_PERIPHERAL) { + ret = dwc3_gadget_init(dwc); + if (ret) { + dev_err(&pdev->dev, "failed to initialized gadget\n"); + goto err4; + } + } + + ret = dwc3_debugfs_init(dwc); + if (ret) { + dev_err(&pdev->dev, "failed to initialize debugfs\n"); + goto err5; + } + + pm_runtime_allow(&pdev->dev); + + return 0; + +err5: + if (features & DWC3_HAS_PERIPHERAL) + dwc3_gadget_exit(dwc); + +err4: + dwc3_core_exit(dwc); + +err3: + iounmap(regs); + +err2: + release_mem_region(res->start, resource_size(res)); + +err1: + kfree(dwc->mem); + +err0: + return ret; +} + +static int __devexit dwc3_remove(struct platform_device *pdev) +{ + const struct platform_device_id *id = platform_get_device_id(pdev); + struct dwc3 *dwc = platform_get_drvdata(pdev); + struct resource *res; + unsigned int features = id->driver_data; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + + pm_runtime_put(&pdev->dev); + pm_runtime_disable(&pdev->dev); + + dwc3_debugfs_exit(dwc); + + if (features & DWC3_HAS_PERIPHERAL) + dwc3_gadget_exit(dwc); + + dwc3_core_exit(dwc); + release_mem_region(res->start, resource_size(res)); + iounmap(dwc->regs); + kfree(dwc->mem); + + return 0; +} + +static const struct platform_device_id dwc3_id_table[] __devinitconst = { + { + .name = "dwc3-omap", + .driver_data = (DWC3_HAS_PERIPHERAL + | DWC3_HAS_XHCI + | DWC3_HAS_OTG), + }, + { + .name = "dwc3-pci", + .driver_data = DWC3_HAS_PERIPHERAL, + }, + { }, /* Terminating Entry */ +}; +MODULE_DEVICE_TABLE(platform, dwc3_id_table); + +static struct platform_driver dwc3_driver = { + .probe = dwc3_probe, + .remove = __devexit_p(dwc3_remove), + .driver = { + .name = "dwc3", + }, + .id_table = dwc3_id_table, +}; + +MODULE_AUTHOR("Felipe Balbi "); +MODULE_LICENSE("Dual BSD/GPL"); +MODULE_DESCRIPTION("DesignWare USB3 DRD Controller Driver"); + +static int __devinit dwc3_init(void) +{ + return platform_driver_register(&dwc3_driver); +} +module_init(dwc3_init); + +static void __exit dwc3_exit(void) +{ + platform_driver_unregister(&dwc3_driver); +} +module_exit(dwc3_exit); diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h new file mode 100644 index 0000000..83b2960 --- /dev/null +++ b/drivers/usb/dwc3/core.h @@ -0,0 +1,709 @@ +/** + * core.h - DesignWare USB3 DRD Core Header + * + * Copyright (C) 2010-2011 Texas Instruments Incorporated - http://www.ti.com + * All rights reserved. + * + * Authors: Felipe Balbi , + * Sebastian Andrzej Siewior + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions, and the following disclaimer, + * without modification. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. The names of the above-listed copyright holders may not be used + * to endorse or promote products derived from this software without + * specific prior written permission. + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") version 2, as published by the Free + * Software Foundation. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS + * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, + * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR + * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR + * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, + * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, + * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR + * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF + * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING + * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#ifndef __DRIVERS_USB_DWC3_CORE_H +#define __DRIVERS_USB_DWC3_CORE_H + +#include +#include +#include +#include +#include +#include + +#include +#include + +/* Global constants */ +#define DWC3_ENDPOINTS_NUM 32 + +#define DWC3_EVENT_BUFFERS_NUM 2 +#define DWC3_EVENT_BUFFERS_SIZE PAGE_SIZE +#define DWC3_EVENT_TYPE_MASK 0xfe + +#define DWC3_EVENT_TYPE_DEV 0 +#define DWC3_EVENT_TYPE_CARKIT 3 +#define DWC3_EVENT_TYPE_I2C 4 + +#define DWC3_DEVICE_EVENT_DISCONNECT 0 +#define DWC3_DEVICE_EVENT_RESET 1 +#define DWC3_DEVICE_EVENT_CONNECT_DONE 2 +#define DWC3_DEVICE_EVENT_LINK_STATUS_CHANGE 3 +#define DWC3_DEVICE_EVENT_WAKEUP 4 +#define DWC3_DEVICE_EVENT_EOPF 6 +#define DWC3_DEVICE_EVENT_SOF 7 +#define DWC3_DEVICE_EVENT_ERRATIC_ERROR 9 +#define DWC3_DEVICE_EVENT_CMD_CMPL 10 +#define DWC3_DEVICE_EVENT_OVERFLOW 11 + +#define DWC3_GEVNTCOUNT_MASK 0xfffc +#define DWC3_GSNPSID_MASK 0xffff0000 +#define DWC3_GSNPSREV_MASK 0xffff + +/* Global Registers */ +#define DWC3_GSBUSCFG0 0xc100 +#define DWC3_GSBUSCFG1 0xc104 +#define DWC3_GTXTHRCFG 0xc108 +#define DWC3_GRXTHRCFG 0xc10c +#define DWC3_GCTL 0xc110 +#define DWC3_GEVTEN 0xc114 +#define DWC3_GSTS 0xc118 +#define DWC3_GSNPSID 0xc120 +#define DWC3_GGPIO 0xc124 +#define DWC3_GUID 0xc128 +#define DWC3_GUCTL 0xc12c +#define DWC3_GBUSERRADDR0 0xc130 +#define DWC3_GBUSERRADDR1 0xc134 +#define DWC3_GPRTBIMAP0 0xc138 +#define DWC3_GPRTBIMAP1 0xc13c +#define DWC3_GHWPARAMS0 0xc140 +#define DWC3_GHWPARAMS1 0xc144 +#define DWC3_GHWPARAMS2 0xc148 +#define DWC3_GHWPARAMS3 0xc14c +#define DWC3_GHWPARAMS4 0xc150 +#define DWC3_GHWPARAMS5 0xc154 +#define DWC3_GHWPARAMS6 0xc158 +#define DWC3_GHWPARAMS7 0xc15c +#define DWC3_GDBGFIFOSPACE 0xc160 +#define DWC3_GDBGLTSSM 0xc164 +#define DWC3_GPRTBIMAP_HS0 0xc180 +#define DWC3_GPRTBIMAP_HS1 0xc184 +#define DWC3_GPRTBIMAP_FS0 0xc188 +#define DWC3_GPRTBIMAP_FS1 0xc18c + +#define DWC3_GUSB2PHYCFG(n) (0xc200 + (n * 0x04)) +#define DWC3_GUSB2I2CCTL(n) (0xc240 + (n * 0x04)) + +#define DWC3_GUSB2PHYACC(n) (0xc280 + (n * 0x04)) + +#define DWC3_GUSB3PIPECTL(n) (0xc2c0 + (n * 0x04)) + +#define DWC3_GTXFIFOSIZ(n) (0xc300 + (n * 0x04)) +#define DWC3_GRXFIFOSIZ(n) (0xc380 + (n * 0x04)) + +#define DWC3_GEVNTADRLO(n) (0xc400 + (n * 0x10)) +#define DWC3_GEVNTADRHI(n) (0xc404 + (n * 0x10)) +#define DWC3_GEVNTSIZ(n) (0xc408 + (n * 0x10)) +#define DWC3_GEVNTCOUNT(n) (0xc40c + (n * 0x10)) + +#define DWC3_GHWPARAMS8 0xc600 + +/* Device Registers */ +#define DWC3_DCFG 0xc700 +#define DWC3_DCTL 0xc704 +#define DWC3_DEVTEN 0xc708 +#define DWC3_DSTS 0xc70c +#define DWC3_DGCMDPAR 0xc710 +#define DWC3_DGCMD 0xc714 +#define DWC3_DALEPENA 0xc720 +#define DWC3_DEPCMDPAR2(n) (0xc800 + (n * 0x10)) +#define DWC3_DEPCMDPAR1(n) (0xc804 + (n * 0x10)) +#define DWC3_DEPCMDPAR0(n) (0xc808 + (n * 0x10)) +#define DWC3_DEPCMD(n) (0xc80c + (n * 0x10)) + +/* OTG Registers */ +#define DWC3_OCFG 0xcc00 +#define DWC3_OCTL 0xcc04 +#define DWC3_OEVTEN 0xcc08 +#define DWC3_OSTS 0xcc0C + +/* Bit fields */ + +/* Global Configuration Register */ +#define DWC3_GCTL_PWRDNSCALE(n) (n << 19) +#define DWC3_GCTL_U2RSTECN 16 +#define DWC3_GCTL_RAMCLKSEL(x) ((x & DWC3_GCTL_CLK_MASK) << 6) +#define DWC3_GCTL_CLK_BUS (0) +#define DWC3_GCTL_CLK_PIPE (1) +#define DWC3_GCTL_CLK_PIPEHALF (2) +#define DWC3_GCTL_CLK_MASK (3) + +#define DWC3_GCTL_PRTCAPDIR(n) (n << 12) +#define DWC3_GCTL_PRTCAP_HOST 1 +#define DWC3_GCTL_PRTCAP_DEVICE 2 +#define DWC3_GCTL_PRTCAP_OTG 3 + +#define DWC3_GCTL_CORESOFTRESET (1 << 11) +#define DWC3_GCTL_DISSCRAMBLE (1 << 3) + +/* Global USB2 PHY Configuration Register */ +#define DWC3_GUSB2PHYCFG_PHYSOFTRST (1 << 31) +#define DWC3_GUSB2PHYCFG_SUSPHY (1 << 6) + +/* Global USB3 PIPE Control Register */ +#define DWC3_GUSB3PIPECTL_PHYSOFTRST (1 << 31) +#define DWC3_GUSB3PIPECTL_SUSPHY (1 << 17) + +/* Device Configuration Register */ +#define DWC3_DCFG_DEVADDR(addr) ((addr) << 3) +#define DWC3_DCFG_DEVADDR_MASK DWC3_DCFG_DEVADDR(0x7f) + +#define DWC3_DCFG_SPEED_MASK (7 << 0) +#define DWC3_DCFG_SUPERSPEED (4 << 0) +#define DWC3_DCFG_HIGHSPEED (0 << 0) +#define DWC3_DCFG_FULLSPEED2 (1 << 0) +#define DWC3_DCFG_LOWSPEED (2 << 0) +#define DWC3_DCFG_FULLSPEED1 (3 << 0) + +/* Device Control Register */ +#define DWC3_DCTL_RUN_STOP (1 << 31) +#define DWC3_DCTL_CSFTRST (1 << 30) +#define DWC3_DCTL_LSFTRST (1 << 29) + +#define DWC3_DCTL_HIRD_THRES_MASK (0x1f << 24) +#define DWC3_DCTL_HIRD_THRES(n) (((n) & DWC3_DCTL_HIRD_THRES_MASK) >> 24) + +#define DWC3_DCTL_APPL1RES (1 << 23) + +#define DWC3_DCTL_INITU2ENA (1 << 12) +#define DWC3_DCTL_ACCEPTU2ENA (1 << 11) +#define DWC3_DCTL_INITU1ENA (1 << 10) +#define DWC3_DCTL_ACCEPTU1ENA (1 << 9) +#define DWC3_DCTL_TSTCTRL_MASK (0xf << 1) + +#define DWC3_DCTL_ULSTCHNGREQ_MASK (0x0f << 5) +#define DWC3_DCTL_ULSTCHNGREQ(n) (((n) << 5) & DWC3_DCTL_ULSTCHNGREQ_MASK) + +#define DWC3_DCTL_ULSTCHNG_NO_ACTION (DWC3_DCTL_ULSTCHNGREQ(0)) +#define DWC3_DCTL_ULSTCHNG_SS_DISABLED (DWC3_DCTL_ULSTCHNGREQ(4)) +#define DWC3_DCTL_ULSTCHNG_RX_DETECT (DWC3_DCTL_ULSTCHNGREQ(5)) +#define DWC3_DCTL_ULSTCHNG_SS_INACTIVE (DWC3_DCTL_ULSTCHNGREQ(6)) +#define DWC3_DCTL_ULSTCHNG_RECOVERY (DWC3_DCTL_ULSTCHNGREQ(8)) +#define DWC3_DCTL_ULSTCHNG_COMPLIANCE (DWC3_DCTL_ULSTCHNGREQ(10)) +#define DWC3_DCTL_ULSTCHNG_LOOPBACK (DWC3_DCTL_ULSTCHNGREQ(11)) + +/* Device Event Enable Register */ +#define DWC3_DEVTEN_VNDRDEVTSTRCVEDEN (1 << 12) +#define DWC3_DEVTEN_EVNTOVERFLOWEN (1 << 11) +#define DWC3_DEVTEN_CMDCMPLTEN (1 << 10) +#define DWC3_DEVTEN_ERRTICERREN (1 << 9) +#define DWC3_DEVTEN_SOFEN (1 << 7) +#define DWC3_DEVTEN_EOPFEN (1 << 6) +#define DWC3_DEVTEN_WKUPEVTEN (1 << 4) +#define DWC3_DEVTEN_ULSTCNGEN (1 << 3) +#define DWC3_DEVTEN_CONNECTDONEEN (1 << 2) +#define DWC3_DEVTEN_USBRSTEN (1 << 1) +#define DWC3_DEVTEN_DISCONNEVTEN (1 << 0) + +/* Device Status Register */ +#define DWC3_DSTS_PWRUPREQ (1 << 24) +#define DWC3_DSTS_COREIDLE (1 << 23) +#define DWC3_DSTS_DEVCTRLHLT (1 << 22) + +#define DWC3_DSTS_USBLNKST_MASK (0x0f << 18) +#define DWC3_DSTS_USBLNKST(n) (((n) & DWC3_DSTS_USBLNKST_MASK) >> 18) + +#define DWC3_DSTS_RXFIFOEMPTY (1 << 17) + +#define DWC3_DSTS_SOFFN_MASK (0x3ff << 3) +#define DWC3_DSTS_SOFFN(n) (((n) & DWC3_DSTS_SOFFN_MASK) >> 3) + +#define DWC3_DSTS_CONNECTSPD (7 << 0) + +#define DWC3_DSTS_SUPERSPEED (4 << 0) +#define DWC3_DSTS_HIGHSPEED (0 << 0) +#define DWC3_DSTS_FULLSPEED2 (1 << 0) +#define DWC3_DSTS_LOWSPEED (2 << 0) +#define DWC3_DSTS_FULLSPEED1 (3 << 0) + +/* Device Generic Command Register */ +#define DWC3_DGCMD_SET_LMP 0x01 +#define DWC3_DGCMD_SET_PERIODIC_PAR 0x02 +#define DWC3_DGCMD_XMIT_FUNCTION 0x03 +#define DWC3_DGCMD_SELECTED_FIFO_FLUSH 0x09 +#define DWC3_DGCMD_ALL_FIFO_FLUSH 0x0a +#define DWC3_DGCMD_SET_ENDPOINT_NRDY 0x0c +#define DWC3_DGCMD_RUN_SOC_BUS_LOOPBACK 0x10 + +/* Device Endpoint Command Register */ +#define DWC3_DEPCMD_PARAM_SHIFT 16 +#define DWC3_DEPCMD_PARAM(x) (x << DWC3_DEPCMD_PARAM_SHIFT) +#define DWC3_DEPCMD_GET_RSC_IDX(x) ((x >> DWC3_DEPCMD_PARAM_SHIFT) & 0x7f) +#define DWC3_DEPCMD_STATUS_MASK (0x0f << 12) +#define DWC3_DEPCMD_STATUS(x) ((x & DWC3_DEPCMD_STATUS_MASK) >> 12) +#define DWC3_DEPCMD_HIPRI_FORCERM (1 << 11) +#define DWC3_DEPCMD_CMDACT (1 << 10) +#define DWC3_DEPCMD_CMDIOC (1 << 8) + +#define DWC3_DEPCMD_DEPSTARTCFG (0x09 << 0) +#define DWC3_DEPCMD_ENDTRANSFER (0x08 << 0) +#define DWC3_DEPCMD_UPDATETRANSFER (0x07 << 0) +#define DWC3_DEPCMD_STARTTRANSFER (0x06 << 0) +#define DWC3_DEPCMD_CLEARSTALL (0x05 << 0) +#define DWC3_DEPCMD_SETSTALL (0x04 << 0) +#define DWC3_DEPCMD_GETSEQNUMBER (0x03 << 0) +#define DWC3_DEPCMD_SETTRANSFRESOURCE (0x02 << 0) +#define DWC3_DEPCMD_SETEPCONFIG (0x01 << 0) + +/* The EP number goes 0..31 so ep0 is always out and ep1 is always in */ +#define DWC3_DALEPENA_EP(n) (1 << n) + +#define DWC3_DEPCMD_TYPE_CONTROL 0 +#define DWC3_DEPCMD_TYPE_ISOC 1 +#define DWC3_DEPCMD_TYPE_BULK 2 +#define DWC3_DEPCMD_TYPE_INTR 3 + +/* Structures */ + +struct dwc3_trb_hw; + +/** + * struct dwc3_event_buffer - Software event buffer representation + * @list: a list of event buffers + * @buf: _THE_ buffer + * @length: size of this buffer + * @dma: dma_addr_t + * @dwc: pointer to DWC controller + */ +struct dwc3_event_buffer { + void *buf; + unsigned length; + unsigned int lpos; + + dma_addr_t dma; + + struct dwc3 *dwc; +}; + +#define DWC3_EP_FLAG_STALLED (1 << 0) +#define DWC3_EP_FLAG_WEDGED (1 << 1) + +#define DWC3_EP_DIRECTION_TX true +#define DWC3_EP_DIRECTION_RX false + +#define DWC3_TRB_NUM 32 +#define DWC3_TRB_MASK (DWC3_TRB_NUM - 1) + +/** + * struct dwc3_ep - device side endpoint representation + * @endpoint: usb endpoint + * @request_list: list of requests for this endpoint + * @req_queued: list of requests on this ep which have TRBs setup + * @trb_pool: array of transaction buffers + * @trb_pool_dma: dma address of @trb_pool + * @free_slot: next slot which is going to be used + * @busy_slot: first slot which is owned by HW + * @desc: usb_endpoint_descriptor pointer + * @dwc: pointer to DWC controller + * @flags: endpoint flags (wedged, stalled, ...) + * @current_trb: index of current used trb + * @number: endpoint number (1 - 15) + * @type: set to bmAttributes & USB_ENDPOINT_XFERTYPE_MASK + * @res_trans_idx: Resource transfer index + * @interval: the intervall on which the ISOC transfer is started + * @name: a human readable name e.g. ep1out-bulk + * @direction: true for TX, false for RX + */ +struct dwc3_ep { + struct usb_ep endpoint; + struct list_head request_list; + struct list_head req_queued; + + struct dwc3_trb_hw *trb_pool; + dma_addr_t trb_pool_dma; + u32 free_slot; + u32 busy_slot; + const struct usb_endpoint_descriptor *desc; + struct dwc3 *dwc; + + unsigned flags; +#define DWC3_EP_ENABLED (1 << 0) +#define DWC3_EP_STALL (1 << 1) +#define DWC3_EP_WEDGE (1 << 2) +#define DWC3_EP_BUSY (1 << 4) +#define DWC3_EP_PENDING_REQUEST (1 << 5) +#define DWC3_EP_WILL_SHUTDOWN (1 << 6) + + unsigned current_trb; + + u8 number; + u8 type; + u8 res_trans_idx; + u32 interval; + + char name[20]; + + unsigned direction:1; +}; + +enum dwc3_phy { + DWC3_PHY_UNKNOWN = 0, + DWC3_PHY_USB3, + DWC3_PHY_USB2, +}; + +enum dwc3_ep0_state { + EP0_UNCONNECTED = 0, + EP0_IDLE, + EP0_IN_DATA_PHASE, + EP0_OUT_DATA_PHASE, + EP0_IN_WAIT_GADGET, + EP0_OUT_WAIT_GADGET, + EP0_IN_WAIT_NRDY, + EP0_OUT_WAIT_NRDY, + EP0_IN_STATUS_PHASE, + EP0_OUT_STATUS_PHASE, + EP0_STALL, +}; + +enum dwc3_link_state { + /* In SuperSpeed */ + DWC3_LINK_STATE_U0 = 0x00, /* in HS, means ON */ + DWC3_LINK_STATE_U1 = 0x01, + DWC3_LINK_STATE_U2 = 0x02, /* in HS, means SLEEP */ + DWC3_LINK_STATE_U3 = 0x03, /* in HS, means SUSPEND */ + DWC3_LINK_STATE_SS_DIS = 0x04, + DWC3_LINK_STATE_RX_DET = 0x05, /* in HS, means Early Suspend */ + DWC3_LINK_STATE_SS_INACT = 0x06, + DWC3_LINK_STATE_POLL = 0x07, + DWC3_LINK_STATE_RECOV = 0x08, + DWC3_LINK_STATE_HRESET = 0x09, + DWC3_LINK_STATE_CMPLY = 0x0a, + DWC3_LINK_STATE_LPBK = 0x0b, + DWC3_LINK_STATE_MASK = 0x0f, +}; + +enum dwc3_device_state { + DWC3_DEFAULT_STATE, + DWC3_ADDRESS_STATE, + DWC3_CONFIGURED_STATE, +}; + +/** + * struct dwc3_trb - transfer request block + * @bpl: lower 32bit of the buffer + * @bph: higher 32bit of the buffer + * @length: buffer size (up to 16mb - 1) + * @pcm1: packet count m1 + * @trbsts: trb status + * 0 = ok + * 1 = missed isoc + * 2 = setup pending + * @hwo: hardware owner of descriptor + * @lst: last trb + * @chn: chain buffers + * @csp: continue on short packets (only supported on isoc eps) + * @trbctl: trb control + * 1 = normal + * 2 = control-setup + * 3 = control-status-2 + * 4 = control-status-3 + * 5 = control-data (first trb of data stage) + * 6 = isochronous-first (first trb of service interval) + * 7 = isochronous + * 8 = link trb + * others = reserved + * @isp_imi: interrupt on short packet / interrupt on missed isoc + * @ioc: interrupt on complete + * @sid_sofn: Stream ID / SOF Number + */ +struct dwc3_trb { + u64 bplh; + + union { + struct { + u32 length:24; + u32 pcm1:2; + u32 reserved27_26:2; + u32 trbsts:4; +#define DWC3_TRB_STS_OKAY 0 +#define DWC3_TRB_STS_MISSED_ISOC 1 +#define DWC3_TRB_STS_SETUP_PENDING 2 + }; + u32 len_pcm; + }; + + union { + struct { + u32 hwo:1; + u32 lst:1; + u32 chn:1; + u32 csp:1; + u32 trbctl:6; + u32 isp_imi:1; + u32 ioc:1; + u32 reserved13_12:2; + u32 sid_sofn:16; + u32 reserved31_30:2; + }; + u32 control; + }; +} __packed; + +/** + * struct dwc3_trb_hw - transfer request block (hw format) + * @bpl: DW0-3 + * @bph: DW4-7 + * @size: DW8-B + * @trl: DWC-F + */ +struct dwc3_trb_hw { + __le32 bpl; + __le32 bph; + __le32 size; + __le32 ctrl; +} __packed; + +static inline void dwc3_trb_to_hw(struct dwc3_trb *nat, struct dwc3_trb_hw *hw) +{ + hw->bpl = cpu_to_le32(lower_32_bits(nat->bplh)); + hw->bph = cpu_to_le32(upper_32_bits(nat->bplh)); + hw->size = cpu_to_le32p(&nat->len_pcm); + /* HWO is written last */ + hw->ctrl = cpu_to_le32p(&nat->control); +} + +static inline void dwc3_trb_to_nat(struct dwc3_trb_hw *hw, struct dwc3_trb *nat) +{ + u64 bplh; + + bplh = le32_to_cpup(&hw->bpl); + bplh |= (u64) le32_to_cpup(&hw->bph) << 32; + nat->bplh = bplh; + + nat->len_pcm = le32_to_cpup(&hw->size); + nat->control = le32_to_cpup(&hw->ctrl); +} + +/** + * struct dwc3 - representation of our controller + * ctrl_req: usb control request which is used for ep0 + * ep0_trb: trb which is used for the ctrl_req + * setup_buf: used while precessing STD USB requests + * ctrl_req_addr: dma address of ctrl_req + * ep0_trb: dma address of ep0_trb + * ep0_usb_req: dummy req used while handling STD USB requests + * setup_buf_addr: dma address of setup_buf + * @lock: for synchronizing + * @dev: pointer to our struct device + * @event_buffer_list: a list of event buffers + * @gadget: device side representation of the peripheral controller + * @gadget_driver: pointer to the gadget driver + * @regs: base address for our registers + * @regs_size: address space size + * @irq: IRQ number + * @revision: revision register contents + * @is_selfpowered: true when we are selfpowered + * @three_stage_setup: set if we perform a three phase setup + * @ep0_status_pending: ep0 status response without a req is pending + * @ep0state: state of endpoint zero + * @link_state: link state + * @speed: device speed (super, high, full, low) + * @mem: points to start of memory which is used for this struct. + * @root: debugfs root folder pointer + */ +struct dwc3 { + struct usb_ctrlrequest *ctrl_req; + struct dwc3_trb_hw *ep0_trb; + u8 *setup_buf; + dma_addr_t ctrl_req_addr; + dma_addr_t ep0_trb_addr; + dma_addr_t setup_buf_addr; + struct usb_request ep0_usb_req; + /* device lock */ + spinlock_t lock; + struct device *dev; + + struct dwc3_event_buffer *ev_buffs[DWC3_EVENT_BUFFERS_NUM]; + struct dwc3_ep *eps[DWC3_ENDPOINTS_NUM]; + + struct usb_gadget gadget; + struct usb_gadget_driver *gadget_driver; + + void __iomem *regs; + size_t regs_size; + + int irq; + + u32 revision; + +#define DWC3_REVISION_173A 0x5533173a +#define DWC3_REVISION_175A 0x5533175a +#define DWC3_REVISION_180A 0x5533180a +#define DWC3_REVISION_183A 0x5533183a +#define DWC3_REVISION_185A 0x5533185a +#define DWC3_REVISION_188A 0x5533188a +#define DWC3_REVISION_190A 0x5533190a + + unsigned is_selfpowered:1; + unsigned three_stage_setup:1; + unsigned ep0_status_pending:1; + + enum dwc3_ep0_state ep0state; + enum dwc3_link_state link_state; + enum dwc3_device_state dev_state; + + u8 speed; + void *mem; + + struct dentry *root; +}; + +/* -------------------------------------------------------------------------- */ + +#define DWC3_TRBSTS_OK 0 +#define DWC3_TRBSTS_MISSED_ISOC 1 +#define DWC3_TRBSTS_SETUP_PENDING 2 + +#define DWC3_TRBCTL_NORMAL 1 +#define DWC3_TRBCTL_CONTROL_SETUP 2 +#define DWC3_TRBCTL_CONTROL_STATUS2 3 +#define DWC3_TRBCTL_CONTROL_STATUS3 4 +#define DWC3_TRBCTL_CONTROL_DATA 5 +#define DWC3_TRBCTL_ISOCHRONOUS_FIRST 6 +#define DWC3_TRBCTL_ISOCHRONOUS 7 +#define DWC3_TRBCTL_LINK_TRB 8 + +/* -------------------------------------------------------------------------- */ + +struct dwc3_event_type { + u32 is_devspec:1; + u32 type:6; + u32 reserved8_31:25; +} __packed; + +#define DWC3_DEPEVT_XFERCOMPLETE 0x01 +#define DWC3_DEPEVT_XFERINPROGRESS 0x02 +#define DWC3_DEPEVT_XFERNOTREADY 0x03 +#define DWC3_DEPEVT_RXTXFIFOEVT 0x04 +#define DWC3_DEPEVT_STREAMEVT 0x06 +#define DWC3_DEPEVT_EPCMDCMPLT 0x07 + +/** + * struct dwc3_event_depvt - Device Endpoint Events + * @one_bit: indicates this is an endpoint event (not used) + * @endpoint_number: number of the endpoint + * @endpoint_event: The event we have: + * 0x00 - Reserved + * 0x01 - XferComplete + * 0x02 - XferInProgress + * 0x03 - XferNotReady + * 0x04 - RxTxFifoEvt (IN->Underrun, OUT->Overrun) + * 0x05 - Reserved + * 0x06 - StreamEvt + * 0x07 - EPCmdCmplt + * @reserved11_10: Reserved, don't use. + * @status: Indicates the status of the event. Refer to databook for + * more information. + * @parameters: Parameters of the current event. Refer to databook for + * more information. + */ +struct dwc3_event_depevt { + u32 one_bit:1; + u32 endpoint_number:5; + u32 endpoint_event:4; + u32 reserved11_10:2; + u32 status:4; +#define DEPEVT_STATUS_BUSERR (1 << 0) +#define DEPEVT_STATUS_SHORT (1 << 1) +#define DEPEVT_STATUS_IOC (1 << 2) +#define DEPEVT_STATUS_LST (1 << 3) + u32 parameters:16; +} __packed; + +/** + * struct dwc3_event_devt - Device Events + * @one_bit: indicates this is a non-endpoint event (not used) + * @device_event: indicates it's a device event. Should read as 0x00 + * @type: indicates the type of device event. + * 0 - DisconnEvt + * 1 - USBRst + * 2 - ConnectDone + * 3 - ULStChng + * 4 - WkUpEvt + * 5 - Reserved + * 6 - EOPF + * 7 - SOF + * 8 - Reserved + * 9 - ErrticErr + * 10 - CmdCmplt + * 11 - EvntOverflow + * 12 - VndrDevTstRcved + * @reserved15_12: Reserved, not used + * @event_info: Information about this event + * @reserved31_24: Reserved, not used + */ +struct dwc3_event_devt { + u32 one_bit:1; + u32 device_event:7; + u32 type:4; + u32 reserved15_12:4; + u32 event_info:8; + u32 reserved31_24:8; +} __packed; + +/** + * struct dwc3_event_gevt - Other Core Events + * @one_bit: indicates this is a non-endpoint event (not used) + * @device_event: indicates it's (0x03) Carkit or (0x04) I2C event. + * @phy_port_number: self-explanatory + * @reserved31_12: Reserved, not used. + */ +struct dwc3_event_gevt { + u32 one_bit:1; + u32 device_event:7; + u32 phy_port_number:4; + u32 reserved31_12:20; +} __packed; + +/** + * union dwc3_event - representation of Event Buffer contents + * @raw: raw 32-bit event + * @type: the type of the event + * @depevt: Device Endpoint Event + * @devt: Device Event + * @gevt: Global Event + */ +union dwc3_event { + u32 raw; + struct dwc3_event_type type; + struct dwc3_event_depevt depevt; + struct dwc3_event_devt devt; + struct dwc3_event_gevt gevt; +}; + +/* + * DWC3 Features to be used as Driver Data + */ + +#define DWC3_HAS_PERIPHERAL BIT(0) +#define DWC3_HAS_XHCI BIT(1) +#define DWC3_HAS_OTG BIT(3) + +#endif /* __DRIVERS_USB_DWC3_CORE_H */ diff --git a/drivers/usb/dwc3/debug.h b/drivers/usb/dwc3/debug.h new file mode 100644 index 0000000..ee3ba73 --- /dev/null +++ b/drivers/usb/dwc3/debug.h @@ -0,0 +1,51 @@ +/** + * debug.h - DesignWare USB3 DRD Controller Debug Header + * + * Copyright (C) 2010-2011 Texas Instruments Incorporated - http://www.ti.com + * All rights reserved. + * + * Authors: Felipe Balbi , + * Sebastian Andrzej Siewior + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions, and the following disclaimer, + * without modification. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. The names of the above-listed copyright holders may not be used + * to endorse or promote products derived from this software without + * specific prior written permission. + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") version 2, as published by the Free + * Software Foundation. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS + * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, + * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR + * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR + * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, + * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, + * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR + * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF + * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING + * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#include "core.h" + +#ifdef CONFIG_DEBUG_FS +extern int dwc3_debugfs_init(struct dwc3 *); +extern void dwc3_debugfs_exit(struct dwc3 *); +#else +static inline int dwc3_debugfs_init(struct dwc3 *d) +{ return 0; } +static inline void dwc3_debugfs_exit(struct dwc3 *d) +{ } +#endif + diff --git a/drivers/usb/dwc3/debugfs.c b/drivers/usb/dwc3/debugfs.c new file mode 100644 index 0000000..432df53 --- /dev/null +++ b/drivers/usb/dwc3/debugfs.c @@ -0,0 +1,534 @@ +/** + * debugfs.c - DesignWare USB3 DRD Controller DebugFS file + * + * Copyright (C) 2010-2011 Texas Instruments Incorporated - http://www.ti.com + * All rights reserved. + * + * Authors: Felipe Balbi , + * Sebastian Andrzej Siewior + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions, and the following disclaimer, + * without modification. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. The names of the above-listed copyright holders may not be used + * to endorse or promote products derived from this software without + * specific prior written permission. + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") version 2, as published by the Free + * Software Foundation. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS + * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, + * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR + * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR + * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, + * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, + * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR + * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF + * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING + * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#include + +#include "core.h" +#include "gadget.h" +#include "io.h" + +struct dwc3_register { + const char *name; + u32 offset; +}; + +#define dump_register(nm) \ +{ \ + .name = __stringify(nm), \ + .offset = DWC3_ ##nm, \ +} + +static const struct dwc3_register dwc3_regs[] = { + dump_register(GSBUSCFG0), + dump_register(GSBUSCFG1), + dump_register(GTXTHRCFG), + dump_register(GRXTHRCFG), + dump_register(GCTL), + dump_register(GEVTEN), + dump_register(GSTS), + dump_register(GSNPSID), + dump_register(GGPIO), + dump_register(GUID), + dump_register(GUCTL), + dump_register(GBUSERRADDR0), + dump_register(GBUSERRADDR1), + dump_register(GPRTBIMAP0), + dump_register(GPRTBIMAP1), + dump_register(GHWPARAMS0), + dump_register(GHWPARAMS1), + dump_register(GHWPARAMS2), + dump_register(GHWPARAMS3), + dump_register(GHWPARAMS4), + dump_register(GHWPARAMS5), + dump_register(GHWPARAMS6), + dump_register(GHWPARAMS7), + dump_register(GDBGFIFOSPACE), + dump_register(GDBGLTSSM), + dump_register(GPRTBIMAP_HS0), + dump_register(GPRTBIMAP_HS1), + dump_register(GPRTBIMAP_FS0), + dump_register(GPRTBIMAP_FS1), + + dump_register(GUSB2PHYCFG(0)), + dump_register(GUSB2PHYCFG(1)), + dump_register(GUSB2PHYCFG(2)), + dump_register(GUSB2PHYCFG(3)), + dump_register(GUSB2PHYCFG(4)), + dump_register(GUSB2PHYCFG(5)), + dump_register(GUSB2PHYCFG(6)), + dump_register(GUSB2PHYCFG(7)), + dump_register(GUSB2PHYCFG(8)), + dump_register(GUSB2PHYCFG(9)), + dump_register(GUSB2PHYCFG(10)), + dump_register(GUSB2PHYCFG(11)), + dump_register(GUSB2PHYCFG(12)), + dump_register(GUSB2PHYCFG(13)), + dump_register(GUSB2PHYCFG(14)), + dump_register(GUSB2PHYCFG(15)), + + dump_register(GUSB2I2CCTL(0)), + dump_register(GUSB2I2CCTL(1)), + dump_register(GUSB2I2CCTL(2)), + dump_register(GUSB2I2CCTL(3)), + dump_register(GUSB2I2CCTL(4)), + dump_register(GUSB2I2CCTL(5)), + dump_register(GUSB2I2CCTL(6)), + dump_register(GUSB2I2CCTL(7)), + dump_register(GUSB2I2CCTL(8)), + dump_register(GUSB2I2CCTL(9)), + dump_register(GUSB2I2CCTL(10)), + dump_register(GUSB2I2CCTL(11)), + dump_register(GUSB2I2CCTL(12)), + dump_register(GUSB2I2CCTL(13)), + dump_register(GUSB2I2CCTL(14)), + dump_register(GUSB2I2CCTL(15)), + + dump_register(GUSB2PHYACC(0)), + dump_register(GUSB2PHYACC(1)), + dump_register(GUSB2PHYACC(2)), + dump_register(GUSB2PHYACC(3)), + dump_register(GUSB2PHYACC(4)), + dump_register(GUSB2PHYACC(5)), + dump_register(GUSB2PHYACC(6)), + dump_register(GUSB2PHYACC(7)), + dump_register(GUSB2PHYACC(8)), + dump_register(GUSB2PHYACC(9)), + dump_register(GUSB2PHYACC(10)), + dump_register(GUSB2PHYACC(11)), + dump_register(GUSB2PHYACC(12)), + dump_register(GUSB2PHYACC(13)), + dump_register(GUSB2PHYACC(14)), + dump_register(GUSB2PHYACC(15)), + + dump_register(GUSB3PIPECTL(0)), + dump_register(GUSB3PIPECTL(1)), + dump_register(GUSB3PIPECTL(2)), + dump_register(GUSB3PIPECTL(3)), + dump_register(GUSB3PIPECTL(4)), + dump_register(GUSB3PIPECTL(5)), + dump_register(GUSB3PIPECTL(6)), + dump_register(GUSB3PIPECTL(7)), + dump_register(GUSB3PIPECTL(8)), + dump_register(GUSB3PIPECTL(9)), + dump_register(GUSB3PIPECTL(10)), + dump_register(GUSB3PIPECTL(11)), + dump_register(GUSB3PIPECTL(12)), + dump_register(GUSB3PIPECTL(13)), + dump_register(GUSB3PIPECTL(14)), + dump_register(GUSB3PIPECTL(15)), + + dump_register(GTXFIFOSIZ(0)), + dump_register(GTXFIFOSIZ(1)), + dump_register(GTXFIFOSIZ(2)), + dump_register(GTXFIFOSIZ(3)), + dump_register(GTXFIFOSIZ(4)), + dump_register(GTXFIFOSIZ(5)), + dump_register(GTXFIFOSIZ(6)), + dump_register(GTXFIFOSIZ(7)), + dump_register(GTXFIFOSIZ(8)), + dump_register(GTXFIFOSIZ(9)), + dump_register(GTXFIFOSIZ(10)), + dump_register(GTXFIFOSIZ(11)), + dump_register(GTXFIFOSIZ(12)), + dump_register(GTXFIFOSIZ(13)), + dump_register(GTXFIFOSIZ(14)), + dump_register(GTXFIFOSIZ(15)), + dump_register(GTXFIFOSIZ(16)), + dump_register(GTXFIFOSIZ(17)), + dump_register(GTXFIFOSIZ(18)), + dump_register(GTXFIFOSIZ(19)), + dump_register(GTXFIFOSIZ(20)), + dump_register(GTXFIFOSIZ(21)), + dump_register(GTXFIFOSIZ(22)), + dump_register(GTXFIFOSIZ(23)), + dump_register(GTXFIFOSIZ(24)), + dump_register(GTXFIFOSIZ(25)), + dump_register(GTXFIFOSIZ(26)), + dump_register(GTXFIFOSIZ(27)), + dump_register(GTXFIFOSIZ(28)), + dump_register(GTXFIFOSIZ(29)), + dump_register(GTXFIFOSIZ(30)), + dump_register(GTXFIFOSIZ(31)), + + dump_register(GRXFIFOSIZ(0)), + dump_register(GRXFIFOSIZ(1)), + dump_register(GRXFIFOSIZ(2)), + dump_register(GRXFIFOSIZ(3)), + dump_register(GRXFIFOSIZ(4)), + dump_register(GRXFIFOSIZ(5)), + dump_register(GRXFIFOSIZ(6)), + dump_register(GRXFIFOSIZ(7)), + dump_register(GRXFIFOSIZ(8)), + dump_register(GRXFIFOSIZ(9)), + dump_register(GRXFIFOSIZ(10)), + dump_register(GRXFIFOSIZ(11)), + dump_register(GRXFIFOSIZ(12)), + dump_register(GRXFIFOSIZ(13)), + dump_register(GRXFIFOSIZ(14)), + dump_register(GRXFIFOSIZ(15)), + dump_register(GRXFIFOSIZ(16)), + dump_register(GRXFIFOSIZ(17)), + dump_register(GRXFIFOSIZ(18)), + dump_register(GRXFIFOSIZ(19)), + dump_register(GRXFIFOSIZ(20)), + dump_register(GRXFIFOSIZ(21)), + dump_register(GRXFIFOSIZ(22)), + dump_register(GRXFIFOSIZ(23)), + dump_register(GRXFIFOSIZ(24)), + dump_register(GRXFIFOSIZ(25)), + dump_register(GRXFIFOSIZ(26)), + dump_register(GRXFIFOSIZ(27)), + dump_register(GRXFIFOSIZ(28)), + dump_register(GRXFIFOSIZ(29)), + dump_register(GRXFIFOSIZ(30)), + dump_register(GRXFIFOSIZ(31)), + + dump_register(GEVNTADRLO(0)), + dump_register(GEVNTADRHI(0)), + dump_register(GEVNTSIZ(0)), + dump_register(GEVNTCOUNT(0)), + + dump_register(GHWPARAMS8), + dump_register(DCFG), + dump_register(DCTL), + dump_register(DEVTEN), + dump_register(DSTS), + dump_register(DGCMDPAR), + dump_register(DGCMD), + dump_register(DALEPENA), + + dump_register(DEPCMDPAR2(0)), + dump_register(DEPCMDPAR2(1)), + dump_register(DEPCMDPAR2(2)), + dump_register(DEPCMDPAR2(3)), + dump_register(DEPCMDPAR2(4)), + dump_register(DEPCMDPAR2(5)), + dump_register(DEPCMDPAR2(6)), + dump_register(DEPCMDPAR2(7)), + dump_register(DEPCMDPAR2(8)), + dump_register(DEPCMDPAR2(9)), + dump_register(DEPCMDPAR2(10)), + dump_register(DEPCMDPAR2(11)), + dump_register(DEPCMDPAR2(12)), + dump_register(DEPCMDPAR2(13)), + dump_register(DEPCMDPAR2(14)), + dump_register(DEPCMDPAR2(15)), + dump_register(DEPCMDPAR2(16)), + dump_register(DEPCMDPAR2(17)), + dump_register(DEPCMDPAR2(18)), + dump_register(DEPCMDPAR2(19)), + dump_register(DEPCMDPAR2(20)), + dump_register(DEPCMDPAR2(21)), + dump_register(DEPCMDPAR2(22)), + dump_register(DEPCMDPAR2(23)), + dump_register(DEPCMDPAR2(24)), + dump_register(DEPCMDPAR2(25)), + dump_register(DEPCMDPAR2(26)), + dump_register(DEPCMDPAR2(27)), + dump_register(DEPCMDPAR2(28)), + dump_register(DEPCMDPAR2(29)), + dump_register(DEPCMDPAR2(30)), + dump_register(DEPCMDPAR2(31)), + + dump_register(DEPCMDPAR1(0)), + dump_register(DEPCMDPAR1(1)), + dump_register(DEPCMDPAR1(2)), + dump_register(DEPCMDPAR1(3)), + dump_register(DEPCMDPAR1(4)), + dump_register(DEPCMDPAR1(5)), + dump_register(DEPCMDPAR1(6)), + dump_register(DEPCMDPAR1(7)), + dump_register(DEPCMDPAR1(8)), + dump_register(DEPCMDPAR1(9)), + dump_register(DEPCMDPAR1(10)), + dump_register(DEPCMDPAR1(11)), + dump_register(DEPCMDPAR1(12)), + dump_register(DEPCMDPAR1(13)), + dump_register(DEPCMDPAR1(14)), + dump_register(DEPCMDPAR1(15)), + dump_register(DEPCMDPAR1(16)), + dump_register(DEPCMDPAR1(17)), + dump_register(DEPCMDPAR1(18)), + dump_register(DEPCMDPAR1(19)), + dump_register(DEPCMDPAR1(20)), + dump_register(DEPCMDPAR1(21)), + dump_register(DEPCMDPAR1(22)), + dump_register(DEPCMDPAR1(23)), + dump_register(DEPCMDPAR1(24)), + dump_register(DEPCMDPAR1(25)), + dump_register(DEPCMDPAR1(26)), + dump_register(DEPCMDPAR1(27)), + dump_register(DEPCMDPAR1(28)), + dump_register(DEPCMDPAR1(29)), + dump_register(DEPCMDPAR1(30)), + dump_register(DEPCMDPAR1(31)), + + dump_register(DEPCMDPAR0(0)), + dump_register(DEPCMDPAR0(1)), + dump_register(DEPCMDPAR0(2)), + dump_register(DEPCMDPAR0(3)), + dump_register(DEPCMDPAR0(4)), + dump_register(DEPCMDPAR0(5)), + dump_register(DEPCMDPAR0(6)), + dump_register(DEPCMDPAR0(7)), + dump_register(DEPCMDPAR0(8)), + dump_register(DEPCMDPAR0(9)), + dump_register(DEPCMDPAR0(10)), + dump_register(DEPCMDPAR0(11)), + dump_register(DEPCMDPAR0(12)), + dump_register(DEPCMDPAR0(13)), + dump_register(DEPCMDPAR0(14)), + dump_register(DEPCMDPAR0(15)), + dump_register(DEPCMDPAR0(16)), + dump_register(DEPCMDPAR0(17)), + dump_register(DEPCMDPAR0(18)), + dump_register(DEPCMDPAR0(19)), + dump_register(DEPCMDPAR0(20)), + dump_register(DEPCMDPAR0(21)), + dump_register(DEPCMDPAR0(22)), + dump_register(DEPCMDPAR0(23)), + dump_register(DEPCMDPAR0(24)), + dump_register(DEPCMDPAR0(25)), + dump_register(DEPCMDPAR0(26)), + dump_register(DEPCMDPAR0(27)), + dump_register(DEPCMDPAR0(28)), + dump_register(DEPCMDPAR0(29)), + dump_register(DEPCMDPAR0(30)), + dump_register(DEPCMDPAR0(31)), + + dump_register(DEPCMD(0)), + dump_register(DEPCMD(1)), + dump_register(DEPCMD(2)), + dump_register(DEPCMD(3)), + dump_register(DEPCMD(4)), + dump_register(DEPCMD(5)), + dump_register(DEPCMD(6)), + dump_register(DEPCMD(7)), + dump_register(DEPCMD(8)), + dump_register(DEPCMD(9)), + dump_register(DEPCMD(10)), + dump_register(DEPCMD(11)), + dump_register(DEPCMD(12)), + dump_register(DEPCMD(13)), + dump_register(DEPCMD(14)), + dump_register(DEPCMD(15)), + dump_register(DEPCMD(16)), + dump_register(DEPCMD(17)), + dump_register(DEPCMD(18)), + dump_register(DEPCMD(19)), + dump_register(DEPCMD(20)), + dump_register(DEPCMD(21)), + dump_register(DEPCMD(22)), + dump_register(DEPCMD(23)), + dump_register(DEPCMD(24)), + dump_register(DEPCMD(25)), + dump_register(DEPCMD(26)), + dump_register(DEPCMD(27)), + dump_register(DEPCMD(28)), + dump_register(DEPCMD(29)), + dump_register(DEPCMD(30)), + dump_register(DEPCMD(31)), + + dump_register(OCFG), + dump_register(OCTL), + dump_register(OEVTEN), + dump_register(OSTS), +}; + +static int dwc3_regdump_show(struct seq_file *s, void *unused) +{ + struct dwc3 *dwc = s->private; + int i; + + seq_printf(s, "DesignWare USB3 Core Register Dump\n"); + + for (i = 0; i < ARRAY_SIZE(dwc3_regs); i++) { + seq_printf(s, "%-20s : %08x\n", dwc3_regs[i].name, + dwc3_readl(dwc->regs, dwc3_regs[i].offset)); + } + + return 0; +} + +static int dwc3_regdump_open(struct inode *inode, struct file *file) +{ + return single_open(file, dwc3_regdump_show, inode->i_private); +} + +static const struct file_operations dwc3_regdump_fops = { + .open = dwc3_regdump_open, + .read = seq_read, + .release = single_release, +}; + + +static int dwc3_send_testmode_cmd(struct dwc3 *dwc, int mode) +{ + u32 timeout = 250; + + dwc3_writel(dwc->regs, DWC3_DGCMDPAR, mode); + dwc3_writel(dwc->regs, DWC3_DGCMD, DWC3_DGCMD_RUN_SOC_BUS_LOOPBACK | + DWC3_DEPCMD_CMDACT); + do { + u32 reg; + + reg = dwc3_readl(dwc->regs, DWC3_DGCMD); + if (!(reg & DWC3_DEPCMD_CMDACT)) + return 0; + timeout--; + if (!timeout) + return -ETIMEDOUT; + mdelay(1); + } while (1); +} + +static struct dwc3_trb_hw trb_0 __aligned(16); +static struct dwc3_trb_hw trb_1 __aligned(16); + +#define BUF_SIZE 4096 +static int dwc3_testmode_open(struct inode *inode, struct file *file) +{ + struct dwc3 *dwc = inode->i_private; + struct dwc3_gadget_ep_cmd_params par0; + struct dwc3_gadget_ep_cmd_params par1; + struct dwc3_trb trb; + int ret; + u8 *buf0; + u8 *buf1; + + buf0 = kmalloc(BUF_SIZE, GFP_KERNEL); + if (!buf0) + return -ENOMEM; + buf1 = kmalloc(BUF_SIZE, GFP_KERNEL); + if (!buf1) + return -ENOMEM; + + memset(buf0, 0xaa, BUF_SIZE); + memset(buf1, 0x33, BUF_SIZE); + + memset(&trb, 0, sizeof(trb)); + memset(&par0, 0, sizeof(par0)); + memset(&par1, 0, sizeof(par1)); + + trb.lst = 1; + trb.trbctl = DWC3_TRBCTL_NORMAL; + trb.length = BUF_SIZE; + trb.hwo = 1; + + trb.bplh = virt_to_phys(buf0); + dwc3_trb_to_hw(&trb, &trb_0); + + trb.bplh = virt_to_phys(buf1); + dwc3_trb_to_hw(&trb, &trb_1); + + par0.param0.depstrtxfer.transfer_desc_addr_high = + upper_32_bits(virt_to_phys(&trb_0)); + par0.param1.depstrtxfer.transfer_desc_addr_low = + lower_32_bits(virt_to_phys(&trb_0)); + + par1.param0.depstrtxfer.transfer_desc_addr_high = + upper_32_bits(virt_to_phys(&trb_1)); + par1.param1.depstrtxfer.transfer_desc_addr_low = + lower_32_bits(virt_to_phys(&trb_1)); + + dwc3_send_testmode_cmd(dwc, 1); + + ret = dwc3_send_gadget_ep_cmd(dwc, 0, DWC3_DEPCMD_STARTTRANSFER, &par0); + ret = dwc3_send_gadget_ep_cmd(dwc, 1, DWC3_DEPCMD_STARTTRANSFER, &par1); + + dwc3_send_testmode_cmd(dwc, 0); + return -EBUSY; +} + +static const struct file_operations dwc3_testmode_fops = { + .open = dwc3_testmode_open, + .read = seq_read, + .release = single_release, +}; + +int __devinit dwc3_debugfs_init(struct dwc3 *dwc) +{ + struct dentry *root; + struct dentry *file; + int ret; + + root = debugfs_create_dir(dev_name(dwc->dev), NULL); + if (IS_ERR(root)){ + ret = PTR_ERR(root); + goto err0; + } + + dwc->root = root; + + file = debugfs_create_file("regdump", S_IRUGO, root, dwc, + &dwc3_regdump_fops); + if (IS_ERR(file)) { + ret = PTR_ERR(file); + goto err1; + } + file = debugfs_create_file("testmode", S_IRUGO, root, dwc, + &dwc3_testmode_fops); + if (IS_ERR(file)) { + ret = PTR_ERR(file); + goto err1; + } + + return 0; + +err1: + debugfs_remove_recursive(root); + +err0: + return ret; +} + +void __devexit dwc3_debugfs_exit(struct dwc3 *dwc) +{ + debugfs_remove_recursive(dwc->root); + dwc->root = NULL; +} diff --git a/drivers/usb/dwc3/dwc3-omap.c b/drivers/usb/dwc3/dwc3-omap.c new file mode 100644 index 0000000..08fffe6 --- /dev/null +++ b/drivers/usb/dwc3/dwc3-omap.c @@ -0,0 +1,410 @@ +/** + * dwc3-omap.c - OMAP Specific Glue layer + * + * Copyright (C) 2010-2011 Texas Instruments Incorporated - http://www.ti.com + * All rights reserved. + * + * Authors: Felipe Balbi , + * Sebastian Andrzej Siewior + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions, and the following disclaimer, + * without modification. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. The names of the above-listed copyright holders may not be used + * to endorse or promote products derived from this software without + * specific prior written permission. + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") version 2, as published by the Free + * Software Foundation. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS + * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, + * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR + * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR + * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, + * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, + * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR + * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF + * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING + * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#include "io.h" + +/* + * All these registers belong to OMAP's Wrapper around the + * DesignWare USB3 Core. + */ + +#define USBOTGSS_REVISION 0x0000 +#define USBOTGSS_SYSCONFIG 0x0010 +#define USBOTGSS_IRQ_EOI 0x0020 +#define USBOTGSS_IRQSTATUS_RAW_0 0x0024 +#define USBOTGSS_IRQSTATUS_0 0x0028 +#define USBOTGSS_IRQENABLE_SET_0 0x002c +#define USBOTGSS_IRQENABLE_CLR_0 0x0030 +#define USBOTGSS_IRQSTATUS_RAW_1 0x0034 +#define USBOTGSS_IRQSTATUS_1 0x0038 +#define USBOTGSS_IRQENABLE_SET_1 0x003c +#define USBOTGSS_IRQENABLE_CLR_1 0x0040 +#define USBOTGSS_UTMI_OTG_CTRL 0x0080 +#define USBOTGSS_UTMI_OTG_STATUS 0x0084 +#define USBOTGSS_MMRAM_OFFSET 0x0100 +#define USBOTGSS_FLADJ 0x0104 +#define USBOTGSS_DEBUG_CFG 0x0108 +#define USBOTGSS_DEBUG_DATA 0x010c + +/* SYSCONFIG REGISTER */ +#define USBOTGSS_SYSCONFIG_DMADISABLE (1 << 16) +#define USBOTGSS_SYSCONFIG_STANDBYMODE(x) ((x) << 4) +#define USBOTGSS_SYSCONFIG_IDLEMODE(x) ((x) << 2) + +/* IRQ_EOI REGISTER */ +#define USBOTGSS_IRQ_EOI_LINE_NUMBER (1 << 0) + +/* IRQS0 BITS */ +#define USBOTGSS_IRQO_COREIRQ_ST (1 << 0) + +/* IRQ1 BITS */ +#define USBOTGSS_IRQ1_DMADISABLECLR (1 << 17) +#define USBOTGSS_IRQ1_OEVT (1 << 16) +#define USBOTGSS_IRQ1_DRVVBUS_RISE (1 << 13) +#define USBOTGSS_IRQ1_CHRGVBUS_RISE (1 << 12) +#define USBOTGSS_IRQ1_DISCHRGVBUS_RISE (1 << 11) +#define USBOTGSS_IRQ1_IDPULLUP_RISE (1 << 8) +#define USBOTGSS_IRQ1_DRVVBUS_FALL (1 << 5) +#define USBOTGSS_IRQ1_CHRGVBUS_FALL (1 << 4) +#define USBOTGSS_IRQ1_DISCHRGVBUS_FALL (1 << 3) +#define USBOTGSS_IRQ1_IDPULLUP_FALL (1 << 0) + +/* UTMI_OTG_CTRL REGISTER */ +#define USBOTGSS_UTMI_OTG_CTRL_DRVVBUS (1 << 5) +#define USBOTGSS_UTMI_OTG_CTRL_CHRGVBUS (1 << 4) +#define USBOTGSS_UTMI_OTG_CTRL_DISCHRGVBUS (1 << 3) +#define USBOTGSS_UTMI_OTG_CTRL_IDPULLUP (1 << 0) + +/* UTMI_OTG_STATUS REGISTER */ +#define USBOTGSS_UTMI_OTG_STATUS_SW_MODE (1 << 31) +#define USBOTGSS_UTMI_OTG_STATUS_POWERPRESENT (1 << 9) +#define USBOTGSS_UTMI_OTG_STATUS_TXBITSTUFFENABLE (1 << 8) +#define USBOTGSS_UTMI_OTG_STATUS_IDDIG (1 << 4) +#define USBOTGSS_UTMI_OTG_STATUS_SESSEND (1 << 3) +#define USBOTGSS_UTMI_OTG_STATUS_SESSVALID (1 << 2) +#define USBOTGSS_UTMI_OTG_STATUS_VBUSVALID (1 << 1) + +struct dwc3_omap { + /* device lock */ + spinlock_t lock; + + struct platform_device *dwc3; + struct device *dev; + + int irq; + void __iomem *base; + + void *context; + u32 resource_size; + + u32 dma_status:1; +}; + +#ifdef CONFIG_PM +static int dwc3_omap_suspend(struct device *dev) +{ + struct dwc3_omap *omap = dev_get_drvdata(dev); + + memcpy_fromio(omap->context, omap->base, omap->resource_size); + + return 0; +} + +static int dwc3_omap_resume(struct device *dev) +{ + struct dwc3_omap *omap = dev_get_drvdata(dev); + + memcpy_toio(omap->base, omap->context, omap->resource_size); + + return 0; +} + +static int dwc3_omap_idle(struct device *dev) +{ + struct dwc3_omap *omap = dev_get_drvdata(dev); + u32 reg; + + /* stop DMA Engine */ + reg = dwc3_readl(omap->base, USBOTGSS_SYSCONFIG); + reg &= ~(USBOTGSS_SYSCONFIG_DMADISABLE); + dwc3_writel(omap->base, USBOTGSS_SYSCONFIG, reg); + + return 0; +} + +static UNIVERSAL_DEV_PM_OPS(dwc3_omap_pm_ops, dwc3_omap_suspend, + dwc3_omap_resume, dwc3_omap_idle); + +#define DEV_PM_OPS (&dwc3_omap_pm_ops) +#else +#define DEV_PM_OPS NULL +#endif + +static irqreturn_t dwc3_omap_interrupt(int irq, void *_omap) +{ + struct dwc3_omap *omap = _omap; + u32 reg; + u32 ctrl; + + spin_lock(&omap->lock); + + reg = dwc3_readl(omap->base, USBOTGSS_IRQSTATUS_1); + ctrl = dwc3_readl(omap->base, USBOTGSS_UTMI_OTG_CTRL); + + if (reg & USBOTGSS_IRQ1_DMADISABLECLR) { + dev_dbg(omap->base, "DMA Disable was Cleared\n"); + omap->dma_status = false; + } + + if (reg & USBOTGSS_IRQ1_OEVT) + dev_dbg(omap->base, "OTG Event\n"); + + if (reg & USBOTGSS_IRQ1_DRVVBUS_RISE) { + dev_dbg(omap->base, "DRVVBUS Rise\n"); + ctrl |= USBOTGSS_UTMI_OTG_CTRL_DRVVBUS; + } + + if (reg & USBOTGSS_IRQ1_CHRGVBUS_RISE) { + dev_dbg(omap->base, "CHRGVBUS Rise\n"); + ctrl |= USBOTGSS_UTMI_OTG_CTRL_CHRGVBUS; + } + + if (reg & USBOTGSS_IRQ1_DISCHRGVBUS_RISE) { + dev_dbg(omap->base, "DISCHRGVBUS Rise\n"); + ctrl |= USBOTGSS_UTMI_OTG_CTRL_DISCHRGVBUS; + } + + if (reg & USBOTGSS_IRQ1_IDPULLUP_RISE) { + dev_dbg(omap->base, "IDPULLUP Rise\n"); + ctrl |= USBOTGSS_UTMI_OTG_CTRL_IDPULLUP; + } + + if (reg & USBOTGSS_IRQ1_DRVVBUS_FALL) { + dev_dbg(omap->base, "DRVVBUS Fall\n"); + ctrl &= ~USBOTGSS_UTMI_OTG_CTRL_DRVVBUS; + } + + if (reg & USBOTGSS_IRQ1_CHRGVBUS_FALL) { + dev_dbg(omap->base, "CHRGVBUS Fall\n"); + ctrl &= ~USBOTGSS_UTMI_OTG_CTRL_CHRGVBUS; + } + + if (reg & USBOTGSS_IRQ1_DISCHRGVBUS_FALL) { + dev_dbg(omap->base, "DISCHRGVBUS Fall\n"); + ctrl &= ~USBOTGSS_UTMI_OTG_CTRL_DISCHRGVBUS; + } + + if (reg & USBOTGSS_IRQ1_IDPULLUP_FALL) { + dev_dbg(omap->base, "IDPULLUP Fall\n"); + ctrl &= ~USBOTGSS_UTMI_OTG_CTRL_IDPULLUP; + } + + dwc3_writel(omap->base, USBOTGSS_UTMI_OTG_CTRL, ctrl); + + spin_unlock(&omap->lock); + + return IRQ_HANDLED; +} + +static int __devinit dwc3_omap_probe(struct platform_device *pdev) +{ + struct platform_device *dwc3; + struct dwc3_omap *omap; + struct resource *res; + + int ret = -ENOMEM; + int irq; + + u32 reg; + + void __iomem *base; + void *context; + + omap = kzalloc(sizeof(*omap), GFP_KERNEL); + if (!omap) { + dev_err(&pdev->dev, "not enough memory\n"); + goto err0; + } + + platform_set_drvdata(pdev, omap); + + irq = platform_get_irq(pdev, 1); + if (irq < 0) { + dev_err(&pdev->dev, "missing IRQ resource\n"); + ret = -EINVAL; + goto err1; + } + + res = platform_get_resource(pdev, IORESOURCE_MEM, 1); + if (!res) { + dev_err(&pdev->dev, "missing memory base resource\n"); + ret = -EINVAL; + goto err1; + } + + base = ioremap_nocache(res->start, resource_size(res)); + if (!base) { + dev_err(&pdev->dev, "ioremap failed\n"); + goto err1; + } + + dwc3 = platform_device_alloc("dwc3-omap", -1); + if (!dwc3) { + dev_err(&pdev->dev, "couldn't allocate dwc3 device\n"); + goto err2; + } + + context = kzalloc(resource_size(res), GFP_KERNEL); + if (!context) { + dev_err(&pdev->dev, "couldn't allocate dwc3 context memory\n"); + goto err3; + } + + spin_lock_init(&omap->lock); + dma_set_coherent_mask(&dwc3->dev, pdev->dev.coherent_dma_mask); + + dwc3->dev.parent = &pdev->dev; + dwc3->dev.dma_mask = pdev->dev.dma_mask; + dwc3->dev.dma_parms = pdev->dev.dma_parms; + omap->resource_size = resource_size(res); + omap->context = context; + omap->dev = &pdev->dev; + omap->irq = irq; + omap->base = base; + omap->dwc3 = dwc3; + + /* check the DMA Status */ + reg = dwc3_readl(omap->base, USBOTGSS_SYSCONFIG); + omap->dma_status = !!(reg & USBOTGSS_SYSCONFIG_DMADISABLE); + + ret = request_irq(omap->irq, dwc3_omap_interrupt, 0, + "dwc3-wrapper", omap); + if (ret) { + dev_err(&pdev->dev, "failed to request IRQ #%d --> %d\n", + omap->irq, ret); + goto err4; + } + + /* enable all IRQs */ + dwc3_writel(omap->base, USBOTGSS_IRQENABLE_SET_0, 0x01); + + reg = (USBOTGSS_IRQ1_DMADISABLECLR | + USBOTGSS_IRQ1_OEVT | + USBOTGSS_IRQ1_DRVVBUS_RISE | + USBOTGSS_IRQ1_CHRGVBUS_RISE | + USBOTGSS_IRQ1_DISCHRGVBUS_RISE | + USBOTGSS_IRQ1_IDPULLUP_RISE | + USBOTGSS_IRQ1_DRVVBUS_FALL | + USBOTGSS_IRQ1_CHRGVBUS_FALL | + USBOTGSS_IRQ1_DISCHRGVBUS_FALL | + USBOTGSS_IRQ1_IDPULLUP_FALL); + + dwc3_writel(omap->base, USBOTGSS_IRQENABLE_SET_1, reg); + + ret = platform_device_add_resources(dwc3, pdev->resource, + pdev->num_resources); + if (ret) { + dev_err(&pdev->dev, "couldn't add resources to dwc3 device\n"); + goto err5; + } + + ret = platform_device_add(dwc3); + if (ret) { + dev_err(&pdev->dev, "failed to register dwc3 device\n"); + goto err5; + } + + return 0; + +err5: + free_irq(omap->irq, omap); + +err4: + kfree(omap->context); + +err3: + platform_device_put(dwc3); + +err2: + iounmap(base); + +err1: + kfree(omap); + +err0: + return ret; +} + +static int __devexit dwc3_omap_remove(struct platform_device *pdev) +{ + struct dwc3_omap *omap = platform_get_drvdata(pdev); + + platform_device_unregister(omap->dwc3); + + free_irq(omap->irq, omap); + iounmap(omap->base); + + kfree(omap->context); + kfree(omap); + + return 0; +} + +static const struct of_device_id of_dwc3_matach[] = { + { + "ti,dwc3", + }, + { }, +}; +MODULE_DEVICE_TABLE(of, of_dwc3_matach); + +static struct platform_driver dwc3_omap_driver = { + .probe = dwc3_omap_probe, + .remove = __devexit_p(dwc3_omap_remove), + .driver = { + .name = "omap-dwc3", + .pm = DEV_PM_OPS, + .of_match_table = of_dwc3_matach, + }, +}; + +MODULE_AUTHOR("Felipe Balbi "); +MODULE_LICENSE("Dual BSD/GPL"); +MODULE_DESCRIPTION("DesignWare USB3 OMAP Glue Layer"); + +static int __devinit dwc3_omap_init(void) +{ + return platform_driver_register(&dwc3_omap_driver); +} +module_init(dwc3_omap_init); + +static void __exit dwc3_omap_exit(void) +{ + platform_driver_unregister(&dwc3_omap_driver); +} +module_exit(dwc3_omap_exit); diff --git a/drivers/usb/dwc3/dwc3-pci.c b/drivers/usb/dwc3/dwc3-pci.c new file mode 100644 index 0000000..2578595 --- /dev/null +++ b/drivers/usb/dwc3/dwc3-pci.c @@ -0,0 +1,219 @@ +/** + * dwc3-pci.c - PCI Specific glue layer + * + * Copyright (C) 2010-2011 Texas Instruments Incorporated - http://www.ti.com + * All rights reserved. + * + * Authors: Felipe Balbi , + * Sebastian Andrzej Siewior + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions, and the following disclaimer, + * without modification. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. The names of the above-listed copyright holders may not be used + * to endorse or promote products derived from this software without + * specific prior written permission. + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") version 2, as published by the Free + * Software Foundation. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS + * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, + * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR + * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR + * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, + * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, + * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR + * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF + * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING + * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#include +#include +#include +#include + +/* FIXME define these in */ +#define PCI_VENDOR_ID_SYNOPSYS 0x16c3 +#define PCI_DEVICE_ID_SYNOPSYS_HAPSUSB3 0xabcd + +#define DWC3_PCI_DEVS_POSSIBLE 32 + +struct dwc3_pci { + struct device *dev; + struct platform_device *dwc3; +}; + +static DECLARE_BITMAP(dwc3_pci_devs, DWC3_PCI_DEVS_POSSIBLE); + +static int dwc3_pci_get_device_id(struct dwc3_pci *glue) +{ + int id; + +again: + id = find_first_zero_bit(dwc3_pci_devs, DWC3_PCI_DEVS_POSSIBLE); + if (id < DWC3_PCI_DEVS_POSSIBLE) { + int old; + + old = test_and_set_bit(id, dwc3_pci_devs); + if (old) + goto again; + } else { + dev_err(glue->dev, "no space for new device\n"); + id = -ENOMEM; + } + + return 0; +} + +static void dwc3_pci_put_device_id(struct dwc3_pci *glue, int id) +{ + int ret; + + if (id < 0) + return; + + ret = test_bit(id, dwc3_pci_devs); + WARN(!ret, "Device: %s\nID %d not in use\n", + dev_driver_string(glue->dev), id); + clear_bit(id, dwc3_pci_devs); +} + +static int __devinit dwc3_pci_probe(struct pci_dev *pci, + const struct pci_device_id *id) +{ + struct resource res[2]; + struct platform_device *dwc3; + struct dwc3_pci *glue; + int ret = -ENOMEM; + int devid; + + glue = kzalloc(sizeof(*glue), GFP_KERNEL); + if (!glue) { + dev_err(&pci->dev, "not enough memory\n"); + goto err0; + } + + glue->dev = &pci->dev; + + ret = pci_enable_device(pci); + if (ret) { + dev_err(&pci->dev, "failed to enable pci device\n"); + goto err1; + } + + pci_set_power_state(pci, PCI_D0); + pci_set_master(pci); + + devid = dwc3_pci_get_device_id(glue); + if (devid < 0) + goto err2; + + dwc3 = platform_device_alloc("dwc3-pci", devid); + if (!dwc3) { + dev_err(&pci->dev, "couldn't allocate dwc3 device\n"); + goto err3; + } + + memset(res, 0x00, sizeof(struct resource) * ARRAY_SIZE(res)); + + res[0].start = pci_resource_start(pci, 0); + res[0].end = pci_resource_end(pci, 0); + res[0].name = "dwc_usb3"; + res[0].flags = IORESOURCE_MEM; + + res[1].start = pci->irq; + res[1].name = "dwc_usb3"; + res[1].flags = IORESOURCE_IRQ; + + ret = platform_device_add_resources(dwc3, res, ARRAY_SIZE(res)); + if (ret) { + dev_err(&pci->dev, "couldn't add resources to dwc3 device\n"); + goto err4; + } + + pci_set_drvdata(pci, glue); + + dma_set_coherent_mask(&dwc3->dev, pci->dev.coherent_dma_mask); + + dwc3->dev.dma_mask = pci->dev.dma_mask; + dwc3->dev.dma_parms = pci->dev.dma_parms; + dwc3->dev.parent = &pci->dev; + glue->dwc3 = dwc3; + + ret = platform_device_add(dwc3); + if (ret) { + dev_err(&pci->dev, "failed to register dwc3 device\n"); + goto err4; + } + + return 0; + +err4: + pci_set_drvdata(pci, NULL); + platform_device_put(dwc3); + +err3: + dwc3_pci_put_device_id(glue, devid); + +err2: + pci_disable_device(pci); + +err1: + kfree(pci); + +err0: + return ret; +} + +static void __devexit dwc3_pci_remove(struct pci_dev *pci) +{ + struct dwc3_pci *glue = pci_get_drvdata(pci); + + dwc3_pci_put_device_id(glue, glue->dwc3->id); + platform_device_unregister(glue->dwc3); + pci_set_drvdata(pci, NULL); + pci_disable_device(pci); + kfree(glue); +} + +static DEFINE_PCI_DEVICE_TABLE(dwc3_pci_id_table) = { + { + PCI_DEVICE(PCI_VENDOR_ID_SYNOPSYS, + PCI_DEVICE_ID_SYNOPSYS_HAPSUSB3), + }, + { } /* Terminating Entry */ +}; +MODULE_DEVICE_TABLE(pci, dwc3_pci_id_table); + +static struct pci_driver dwc3_pci_driver = { + .name = "pci-dwc3", + .id_table = dwc3_pci_id_table, + .probe = dwc3_pci_probe, + .remove = __devexit_p(dwc3_pci_remove), +}; + +MODULE_AUTHOR("Felipe Balbi "); +MODULE_LICENSE("Dual BSD/GPL"); +MODULE_DESCRIPTION("DesignWare USB3 PCI Glue Layer"); + +static int __devinit dwc3_pci_init(void) +{ + return pci_register_driver(&dwc3_pci_driver); +} +module_init(dwc3_pci_init); + +static void __exit dwc3_pci_exit(void) +{ + pci_unregister_driver(&dwc3_pci_driver); +} +module_exit(dwc3_pci_exit); diff --git a/drivers/usb/dwc3/ep0.c b/drivers/usb/dwc3/ep0.c new file mode 100644 index 0000000..4698fe0 --- /dev/null +++ b/drivers/usb/dwc3/ep0.c @@ -0,0 +1,782 @@ +/** + * ep0.c - DesignWare USB3 DRD Controller Endpoint 0 Handling + * + * Copyright (C) 2010-2011 Texas Instruments Incorporated - http://www.ti.com + * All rights reserved. + * + * Authors: Felipe Balbi , + * Sebastian Andrzej Siewior + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions, and the following disclaimer, + * without modification. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. The names of the above-listed copyright holders may not be used + * to endorse or promote products derived from this software without + * specific prior written permission. + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") version 2, as published by the Free + * Software Foundation. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS + * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, + * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR + * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR + * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, + * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, + * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR + * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF + * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING + * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +#include "core.h" +#include "gadget.h" +#include "io.h" + +static void dwc3_ep0_inspect_setup(struct dwc3 *dwc, + const struct dwc3_event_depevt *event); + +static const char *dwc3_ep0_state_string(enum dwc3_ep0_state state) +{ + switch (state) { + case EP0_UNCONNECTED: + return "Unconnected"; + case EP0_IDLE: + return "Idle"; + case EP0_IN_DATA_PHASE: + return "IN Data Phase"; + case EP0_OUT_DATA_PHASE: + return "OUT Data Phase"; + case EP0_IN_WAIT_GADGET: + return "IN Wait Gadget"; + case EP0_OUT_WAIT_GADGET: + return "OUT Wait Gadget"; + case EP0_IN_WAIT_NRDY: + return "IN Wait NRDY"; + case EP0_OUT_WAIT_NRDY: + return "OUT Wait NRDY"; + case EP0_IN_STATUS_PHASE: + return "IN Status Phase"; + case EP0_OUT_STATUS_PHASE: + return "OUT Status Phase"; + case EP0_STALL: + return "Stall"; + default: + return "UNKNOWN"; + } +} + +static int dwc3_ep0_start_trans(struct dwc3 *dwc, u8 epnum, dma_addr_t buf_dma, + u32 len) +{ + struct dwc3_gadget_ep_cmd_params params; + struct dwc3_trb_hw *trb_hw; + struct dwc3_trb trb; + struct dwc3_ep *dep; + + int ret; + + dep = dwc->eps[epnum]; + + trb_hw = dwc->ep0_trb; + memset(&trb, 0, sizeof(trb)); + + switch (dwc->ep0state) { + case EP0_IDLE: + trb.trbctl = DWC3_TRBCTL_CONTROL_SETUP; + break; + + case EP0_IN_WAIT_NRDY: + case EP0_OUT_WAIT_NRDY: + case EP0_IN_STATUS_PHASE: + case EP0_OUT_STATUS_PHASE: + if (dwc->three_stage_setup) + trb.trbctl = DWC3_TRBCTL_CONTROL_STATUS3; + else + trb.trbctl = DWC3_TRBCTL_CONTROL_STATUS2; + + if (dwc->ep0state == EP0_IN_WAIT_NRDY) + dwc->ep0state = EP0_IN_STATUS_PHASE; + else if (dwc->ep0state == EP0_OUT_WAIT_NRDY) + dwc->ep0state = EP0_OUT_STATUS_PHASE; + break; + + case EP0_IN_WAIT_GADGET: + dwc->ep0state = EP0_IN_WAIT_NRDY; + return 0; + break; + + case EP0_OUT_WAIT_GADGET: + dwc->ep0state = EP0_OUT_WAIT_NRDY; + return 0; + + break; + + case EP0_IN_DATA_PHASE: + case EP0_OUT_DATA_PHASE: + trb.trbctl = DWC3_TRBCTL_CONTROL_DATA; + break; + + default: + dev_err(dwc->dev, "%s() can't in state %d\n", __func__, + dwc->ep0state); + return -EINVAL; + } + + trb.bplh = buf_dma; + trb.length = len; + + trb.hwo = 1; + trb.lst = 1; + trb.ioc = 1; + trb.isp_imi = 1; + + dwc3_trb_to_hw(&trb, trb_hw); + + memset(¶ms, 0, sizeof(params)); + params.param0.depstrtxfer.transfer_desc_addr_high = + upper_32_bits(dwc->ep0_trb_addr); + params.param1.depstrtxfer.transfer_desc_addr_low = + lower_32_bits(dwc->ep0_trb_addr); + + ret = dwc3_send_gadget_ep_cmd(dwc, dep->number, + DWC3_DEPCMD_STARTTRANSFER, ¶ms); + if (ret < 0) { + dev_dbg(dwc->dev, "failed to send STARTTRANSFER command\n"); + return ret; + } + + dep->res_trans_idx = dwc3_gadget_ep_get_transfer_index(dwc, + dep->number); + + return 0; +} + +static int __dwc3_gadget_ep0_queue(struct dwc3_ep *dep, + struct dwc3_request *req) +{ + struct dwc3 *dwc = dep->dwc; + int ret; + + req->request.actual = 0; + req->request.status = -EINPROGRESS; + req->direction = dep->direction; + req->epnum = dep->number; + + list_add_tail(&req->list, &dep->request_list); + dwc3_map_buffer_to_dma(req); + + ret = dwc3_ep0_start_trans(dwc, dep->number, req->request.dma, + req->request.length); + if (ret < 0) { + list_del(&req->list); + dwc3_unmap_buffer_from_dma(req); + } + + return ret; +} + +int dwc3_gadget_ep0_queue(struct usb_ep *ep, struct usb_request *request, + gfp_t gfp_flags) +{ + struct dwc3_request *req = to_dwc3_request(request); + struct dwc3_ep *dep = to_dwc3_ep(ep); + struct dwc3 *dwc = dep->dwc; + + unsigned long flags; + + int ret; + + switch (dwc->ep0state) { + case EP0_IN_DATA_PHASE: + case EP0_IN_WAIT_GADGET: + case EP0_IN_WAIT_NRDY: + case EP0_IN_STATUS_PHASE: + dep = dwc->eps[1]; + break; + + case EP0_OUT_DATA_PHASE: + case EP0_OUT_WAIT_GADGET: + case EP0_OUT_WAIT_NRDY: + case EP0_OUT_STATUS_PHASE: + dep = dwc->eps[0]; + break; + default: + return -EINVAL; + } + + spin_lock_irqsave(&dwc->lock, flags); + if (!dep->desc) { + dev_dbg(dwc->dev, "trying to queue request %p to disabled %s\n", + request, dep->name); + ret = -ESHUTDOWN; + goto out; + } + + /* we share one TRB for ep0/1 */ + if (!list_empty(&dwc->eps[0]->request_list) || + !list_empty(&dwc->eps[1]->request_list) || + dwc->ep0_status_pending) { + ret = -EBUSY; + goto out; + } + + dev_vdbg(dwc->dev, "queueing request %p to %s length %d, state '%s'\n", + request, dep->name, request->length, + dwc3_ep0_state_string(dwc->ep0state)); + + ret = __dwc3_gadget_ep0_queue(dep, req); + +out: + spin_unlock_irqrestore(&dwc->lock, flags); + + return ret; +} + +static void dwc3_ep0_stall_and_restart(struct dwc3 *dwc) +{ + /* stall is always issued on EP0 */ + __dwc3_gadget_ep_set_halt(dwc->eps[0], 1); + dwc->eps[0]->flags &= ~DWC3_EP_STALL; + dwc->ep0state = EP0_IDLE; + dwc3_ep0_out_start(dwc); +} + +void dwc3_ep0_out_start(struct dwc3 *dwc) +{ + struct dwc3_ep *dep; + int ret; + + dep = dwc->eps[0]; + + ret = dwc3_ep0_start_trans(dwc, 0, dwc->ctrl_req_addr, 8); + WARN_ON(ret < 0); +} + +/* + * Send a zero length packet for the status phase of the control transfer + */ +static void dwc3_ep0_do_setup_status(struct dwc3 *dwc, + const struct dwc3_event_depevt *event) +{ + struct dwc3_ep *dep; + int ret; + u32 epnum; + + epnum = event->endpoint_number; + dep = dwc->eps[epnum]; + + if (epnum) + dwc->ep0state = EP0_IN_STATUS_PHASE; + else + dwc->ep0state = EP0_OUT_STATUS_PHASE; + + /* + * Not sure Why I need a buffer for a zero transfer. Maybe the + * HW reacts strange on a NULL pointer + */ + ret = dwc3_ep0_start_trans(dwc, epnum, dwc->ctrl_req_addr, 0); + if (ret) { + dev_dbg(dwc->dev, "failed to start transfer, stalling\n"); + dwc3_ep0_stall_and_restart(dwc); + } +} + +static struct dwc3_ep *dwc3_wIndex_to_dep(struct dwc3 *dwc, __le16 wIndex_le) +{ + struct dwc3_ep *dep; + u32 windex = le16_to_cpu(wIndex_le); + u32 epnum; + + epnum = (windex & USB_ENDPOINT_NUMBER_MASK) << 1; + if ((windex & USB_ENDPOINT_DIR_MASK) == USB_DIR_IN) + epnum |= 1; + + dep = dwc->eps[epnum]; + if (dep->flags & DWC3_EP_ENABLED) + return dep; + + return NULL; +} + +static void dwc3_ep0_send_status_response(struct dwc3 *dwc) +{ + u32 epnum; + + if (dwc->ep0state == EP0_IN_DATA_PHASE) + epnum = 1; + else + epnum = 0; + + dwc3_ep0_start_trans(dwc, epnum, dwc->ctrl_req_addr, + dwc->ep0_usb_req.length); + dwc->ep0_status_pending = 1; +} + +/* + * ch 9.4.5 + */ +static int dwc3_ep0_handle_status(struct dwc3 *dwc, struct usb_ctrlrequest *ctrl) +{ + struct dwc3_ep *dep; + u32 recip; + u16 usb_status = 0; + __le16 *response_pkt; + + recip = ctrl->bRequestType & USB_RECIP_MASK; + switch (recip) { + case USB_RECIP_DEVICE: + /* + * We are self-powered. U1/U2/LTM will be set later + * once we handle this states. RemoteWakeup is 0 on SS + */ + usb_status |= dwc->is_selfpowered << USB_DEVICE_SELF_POWERED; + break; + + case USB_RECIP_INTERFACE: + /* + * Function Remote Wake Capable D0 + * Function Remote Wakeup D1 + */ + break; + + case USB_RECIP_ENDPOINT: + dep = dwc3_wIndex_to_dep(dwc, ctrl->wIndex); + if (!dep) + return -EINVAL; + + if (dep->flags & DWC3_EP_STALL) + usb_status = 1 << USB_ENDPOINT_HALT; + break; + default: + return -EINVAL; + }; + + response_pkt = (__le16 *) dwc->setup_buf; + *response_pkt = cpu_to_le16(usb_status); + dwc->ep0_usb_req.length = sizeof(*response_pkt); + dwc3_ep0_send_status_response(dwc); + + return 0; +} + +static int dwc3_ep0_handle_feature(struct dwc3 *dwc, + struct usb_ctrlrequest *ctrl, int set) +{ + struct dwc3_ep *dep; + u32 recip; + u32 wValue; + u32 wIndex; + u32 reg; + int ret; + u32 mode; + + wValue = le16_to_cpu(ctrl->wValue); + wIndex = le16_to_cpu(ctrl->wIndex); + recip = ctrl->bRequestType & USB_RECIP_MASK; + switch (recip) { + case USB_RECIP_DEVICE: + + /* + * 9.4.1 says only only for SS, in AddressState only for + * default control pipe + */ + switch (wValue) { + case USB_DEVICE_U1_ENABLE: + case USB_DEVICE_U2_ENABLE: + case USB_DEVICE_LTM_ENABLE: + if (dwc->dev_state != DWC3_CONFIGURED_STATE) + return -EINVAL; + if (dwc->speed != DWC3_DSTS_SUPERSPEED) + return -EINVAL; + } + + /* XXX add U[12] & LTM */ + switch (wValue) { + case USB_DEVICE_REMOTE_WAKEUP: + break; + case USB_DEVICE_U1_ENABLE: + break; + case USB_DEVICE_U2_ENABLE: + break; + case USB_DEVICE_LTM_ENABLE: + break; + + case USB_DEVICE_TEST_MODE: + if ((wIndex & 0xff) != 0) + return -EINVAL; + if (!set) + return -EINVAL; + + mode = wIndex >> 8; + reg = dwc3_readl(dwc->regs, DWC3_DCTL); + reg &= ~DWC3_DCTL_TSTCTRL_MASK; + + switch (mode) { + case TEST_J: + case TEST_K: + case TEST_SE0_NAK: + case TEST_PACKET: + case TEST_FORCE_EN: + reg |= mode << 1; + break; + default: + return -EINVAL; + } + dwc3_writel(dwc->regs, DWC3_DCTL, reg); + break; + default: + return -EINVAL; + } + break; + + case USB_RECIP_INTERFACE: + switch (wValue) { + case USB_INTRF_FUNC_SUSPEND: + if (wIndex & USB_INTRF_FUNC_SUSPEND_LP) + /* XXX enable Low power suspend */ + ; + if (wIndex & USB_INTRF_FUNC_SUSPEND_RW) + /* XXX enable remote wakeup */ + ; + break; + default: + return -EINVAL; + } + break; + + case USB_RECIP_ENDPOINT: + switch (wValue) { + case USB_ENDPOINT_HALT: + + dep = dwc3_wIndex_to_dep(dwc, ctrl->wIndex); + if (!dep) + return -EINVAL; + ret = __dwc3_gadget_ep_set_halt(dep, set); + if (ret) + return -EINVAL; + break; + default: + return -EINVAL; + } + break; + + default: + return -EINVAL; + }; + + dwc->ep0state = EP0_IN_WAIT_NRDY; + + return 0; +} + +static int dwc3_ep0_set_address(struct dwc3 *dwc, struct usb_ctrlrequest *ctrl) +{ + int ret = 0; + u32 addr; + u32 reg; + + addr = le16_to_cpu(ctrl->wValue); + if (addr > 127) + return -EINVAL; + + switch (dwc->dev_state) { + case DWC3_DEFAULT_STATE: + case DWC3_ADDRESS_STATE: + /* + * Not sure if we should program DevAddr now or later + */ + reg = dwc3_readl(dwc->regs, DWC3_DCFG); + reg &= ~(DWC3_DCFG_DEVADDR_MASK); + reg |= DWC3_DCFG_DEVADDR(addr); + dwc3_writel(dwc->regs, DWC3_DCFG, reg); + + if (addr) + dwc->dev_state = DWC3_ADDRESS_STATE; + else + dwc->dev_state = DWC3_DEFAULT_STATE; + break; + + case DWC3_CONFIGURED_STATE: + ret = -EINVAL; + break; + } + dwc->ep0state = EP0_IN_WAIT_NRDY; + return ret; +} + +static int dwc3_ep0_delegate_req(struct dwc3 *dwc, struct usb_ctrlrequest *ctrl) +{ + int ret; + + spin_unlock(&dwc->lock); + ret = dwc->gadget_driver->setup(&dwc->gadget, ctrl); + spin_lock(&dwc->lock); + return ret; +} + +static int dwc3_ep0_set_config(struct dwc3 *dwc, struct usb_ctrlrequest *ctrl) +{ + u32 cfg; + int ret; + + cfg = le16_to_cpu(ctrl->wValue); + + switch (dwc->dev_state) { + case DWC3_DEFAULT_STATE: + return -EINVAL; + break; + + case DWC3_ADDRESS_STATE: + ret = dwc3_ep0_delegate_req(dwc, ctrl); + /* if the cfg matches and the cfg is non zero */ + if (!ret && cfg) + dwc->dev_state = DWC3_CONFIGURED_STATE; + break; + + case DWC3_CONFIGURED_STATE: + ret = dwc3_ep0_delegate_req(dwc, ctrl); + if (!cfg) + dwc->dev_state = DWC3_ADDRESS_STATE; + break; + } + return 0; +} + +static int dwc3_ep0_std_request(struct dwc3 *dwc, struct usb_ctrlrequest *ctrl) +{ + int ret; + + switch (ctrl->bRequest) { + case USB_REQ_GET_STATUS: + dev_vdbg(dwc->dev, "USB_REQ_GET_STATUS\n"); + ret = dwc3_ep0_handle_status(dwc, ctrl); + break; + case USB_REQ_CLEAR_FEATURE: + dev_vdbg(dwc->dev, "USB_REQ_CLEAR_FEATURE\n"); + ret = dwc3_ep0_handle_feature(dwc, ctrl, 0); + break; + case USB_REQ_SET_FEATURE: + dev_vdbg(dwc->dev, "USB_REQ_SET_FEATURE\n"); + ret = dwc3_ep0_handle_feature(dwc, ctrl, 1); + break; + case USB_REQ_SET_ADDRESS: + dev_vdbg(dwc->dev, "USB_REQ_SET_ADDRESS\n"); + ret = dwc3_ep0_set_address(dwc, ctrl); + break; + case USB_REQ_SET_CONFIGURATION: + dev_vdbg(dwc->dev, "USB_REQ_SET_CONFIGURATION\n"); + ret = dwc3_ep0_set_config(dwc, ctrl); + break; + default: + dev_vdbg(dwc->dev, "Forwarding to gadget driver\n"); + ret = dwc3_ep0_delegate_req(dwc, ctrl); + break; + }; + + return ret; +} + +static void dwc3_ep0_inspect_setup(struct dwc3 *dwc, + const struct dwc3_event_depevt *event) +{ + struct usb_ctrlrequest *ctrl = dwc->ctrl_req; + int ret; + u32 len; + + if (!dwc->gadget_driver) + goto err; + + len = le16_to_cpu(ctrl->wLength); + if (!len) { + dwc->ep0state = EP0_IN_WAIT_GADGET; + dwc->three_stage_setup = 0; + } else { + dwc->three_stage_setup = 1; + if (ctrl->bRequestType & USB_DIR_IN) + dwc->ep0state = EP0_IN_DATA_PHASE; + else + dwc->ep0state = EP0_OUT_DATA_PHASE; + } + + if ((ctrl->bRequestType & USB_TYPE_MASK) == USB_TYPE_STANDARD) + ret = dwc3_ep0_std_request(dwc, ctrl); + else + ret = dwc3_ep0_delegate_req(dwc, ctrl); + + if (ret >= 0) + return; + +err: + dwc3_ep0_stall_and_restart(dwc); +} + +static void dwc3_ep0_complete_data(struct dwc3 *dwc, + const struct dwc3_event_depevt *event) +{ + struct dwc3_request *r = NULL; + struct usb_request *ur; + struct dwc3_trb trb; + struct dwc3_ep *dep; + u32 transfered; + u8 epnum; + + epnum = event->endpoint_number; + dep = dwc->eps[epnum]; + + if (!dwc->ep0_status_pending) { + r = next_request(&dep->request_list); + ur = &r->request; + } else { + ur = &dwc->ep0_usb_req; + dwc->ep0_status_pending = 0; + } + + dwc3_trb_to_nat(dwc->ep0_trb, &trb); + + transfered = ur->length - trb.length; + ur->actual += transfered; + + if ((epnum & 1) && ur->actual < ur->length) { + /* for some reason we did not get everything out */ + + dwc3_ep0_stall_and_restart(dwc); + dwc3_gadget_giveback(dep, r, -ECONNRESET); + } else { + /* + * handle the case where we have to send a zero packet. This + * seems to be case when req.length > maxpacket. Could it be? + */ + /* The transfer is complete, wait for HOST */ + if (epnum & 1) + dwc->ep0state = EP0_IN_WAIT_NRDY; + else + dwc->ep0state = EP0_OUT_WAIT_NRDY; + + if (r) + dwc3_gadget_giveback(dep, r, 0); + } +} + +static void dwc3_ep0_complete_req(struct dwc3 *dwc, + const struct dwc3_event_depevt *event) +{ + struct dwc3_request *r; + struct dwc3_ep *dep; + u8 epnum; + + epnum = event->endpoint_number; + dep = dwc->eps[epnum]; + + if (!list_empty(&dep->request_list)) { + r = next_request(&dep->request_list); + + dwc3_gadget_giveback(dep, r, 0); + } + + dwc->ep0state = EP0_IDLE; + dwc3_ep0_out_start(dwc); +} + +static void dwc3_ep0_xfer_complete(struct dwc3 *dwc, + const struct dwc3_event_depevt *event) +{ + switch (dwc->ep0state) { + case EP0_IDLE: + dwc3_ep0_inspect_setup(dwc, event); + break; + + case EP0_IN_DATA_PHASE: + case EP0_OUT_DATA_PHASE: + dwc3_ep0_complete_data(dwc, event); + break; + + case EP0_IN_STATUS_PHASE: + case EP0_OUT_STATUS_PHASE: + dwc3_ep0_complete_req(dwc, event); + break; + + case EP0_IN_WAIT_NRDY: + case EP0_OUT_WAIT_NRDY: + case EP0_IN_WAIT_GADGET: + case EP0_OUT_WAIT_GADGET: + case EP0_UNCONNECTED: + case EP0_STALL: + break; + } +} + +static void dwc3_ep0_xfernotready(struct dwc3 *dwc, + const struct dwc3_event_depevt *event) +{ + switch (dwc->ep0state) { + case EP0_IN_WAIT_GADGET: + dwc->ep0state = EP0_IN_WAIT_NRDY; + break; + case EP0_OUT_WAIT_GADGET: + dwc->ep0state = EP0_OUT_WAIT_NRDY; + break; + + case EP0_IN_WAIT_NRDY: + case EP0_OUT_WAIT_NRDY: + dwc3_ep0_do_setup_status(dwc, event); + break; + + case EP0_IDLE: + case EP0_IN_STATUS_PHASE: + case EP0_OUT_STATUS_PHASE: + case EP0_IN_DATA_PHASE: + case EP0_OUT_DATA_PHASE: + case EP0_UNCONNECTED: + case EP0_STALL: + break; + } +} + +void dwc3_ep0_interrupt(struct dwc3 *dwc, + const const struct dwc3_event_depevt *event) +{ + u8 epnum = event->endpoint_number; + + dev_dbg(dwc->dev, "%s while ep%d%s in state '%s'\n", + dwc3_ep_event_string(event->endpoint_event), + epnum, (epnum & 1) ? "in" : "out", + dwc3_ep0_state_string(dwc->ep0state)); + + switch (event->endpoint_event) { + case DWC3_DEPEVT_XFERCOMPLETE: + dwc3_ep0_xfer_complete(dwc, event); + break; + + case DWC3_DEPEVT_XFERNOTREADY: + dwc3_ep0_xfernotready(dwc, event); + break; + + case DWC3_DEPEVT_XFERINPROGRESS: + case DWC3_DEPEVT_RXTXFIFOEVT: + case DWC3_DEPEVT_STREAMEVT: + case DWC3_DEPEVT_EPCMDCMPLT: + break; + } +} diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c new file mode 100644 index 0000000..de5f0af --- /dev/null +++ b/drivers/usb/dwc3/gadget.c @@ -0,0 +1,2063 @@ +/** + * gadget.c - DesignWare USB3 DRD Controller Gadget Framework Link + * + * Copyright (C) 2010-2011 Texas Instruments Incorporated - http://www.ti.com + * All rights reserved. + * + * Authors: Felipe Balbi , + * Sebastian Andrzej Siewior + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions, and the following disclaimer, + * without modification. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. The names of the above-listed copyright holders may not be used + * to endorse or promote products derived from this software without + * specific prior written permission. + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") version 2, as published by the Free + * Software Foundation. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS + * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, + * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR + * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR + * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, + * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, + * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR + * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF + * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING + * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +#include "core.h" +#include "gadget.h" +#include "io.h" + +#define DMA_ADDR_INVALID (~(dma_addr_t)0) + +void dwc3_map_buffer_to_dma(struct dwc3_request *req) +{ + struct dwc3 *dwc = req->dep->dwc; + + if (req->request.dma == DMA_ADDR_INVALID) { + req->request.dma = dma_map_single(dwc->dev, req->request.buf, + req->request.length, req->direction + ? DMA_TO_DEVICE : DMA_FROM_DEVICE); + req->mapped = true; + } else { + dma_sync_single_for_device(dwc->dev, req->request.dma, + req->request.length, req->direction + ? DMA_TO_DEVICE : DMA_FROM_DEVICE); + req->mapped = false; + } +} + +void dwc3_unmap_buffer_from_dma(struct dwc3_request *req) +{ + struct dwc3 *dwc = req->dep->dwc; + + if (req->mapped) { + dma_unmap_single(dwc->dev, req->request.dma, + req->request.length, req->direction + ? DMA_TO_DEVICE : DMA_FROM_DEVICE); + req->mapped = 0; + } else { + dma_sync_single_for_cpu(dwc->dev, req->request.dma, + req->request.length, req->direction + ? DMA_TO_DEVICE : DMA_FROM_DEVICE); + } +} + +void dwc3_gadget_giveback(struct dwc3_ep *dep, struct dwc3_request *req, + int status) +{ + struct dwc3 *dwc = dep->dwc; + + if (req->queued) { + dep->busy_slot++; + /* + * Skip LINK TRB. We can't use req->trb and check for + * DWC3_TRBCTL_LINK_TRB because it points the TRB we just + * completed (not the LINK TRB). + */ + if (((dep->busy_slot & DWC3_TRB_MASK) == DWC3_TRB_NUM - 1) && + usb_endpoint_xfer_isoc(dep->desc)) + dep->busy_slot++; + } + list_del(&req->list); + + if (req->request.status == -EINPROGRESS) + req->request.status = status; + + dwc3_unmap_buffer_from_dma(req); + + dev_dbg(dwc->dev, "request %p from %s completed %d/%d ===> %d\n", + req, dep->name, req->request.actual, + req->request.length, status); + + spin_unlock(&dwc->lock); + req->request.complete(&req->dep->endpoint, &req->request); + spin_lock(&dwc->lock); +} + +static const char *dwc3_gadget_ep_cmd_string(u8 cmd) +{ + switch (cmd) { + case DWC3_DEPCMD_DEPSTARTCFG: + return "Start New Configuration"; + case DWC3_DEPCMD_ENDTRANSFER: + return "End Transfer"; + case DWC3_DEPCMD_UPDATETRANSFER: + return "Update Transfer"; + case DWC3_DEPCMD_STARTTRANSFER: + return "Start Transfer"; + case DWC3_DEPCMD_CLEARSTALL: + return "Clear Stall"; + case DWC3_DEPCMD_SETSTALL: + return "Set Stall"; + case DWC3_DEPCMD_GETSEQNUMBER: + return "Get Data Sequence Number"; + case DWC3_DEPCMD_SETTRANSFRESOURCE: + return "Set Endpoint Transfer Resource"; + case DWC3_DEPCMD_SETEPCONFIG: + return "Set Endpoint Configuration"; + default: + return "UNKNOWN command"; + } +} + +int dwc3_send_gadget_ep_cmd(struct dwc3 *dwc, unsigned ep, + unsigned cmd, struct dwc3_gadget_ep_cmd_params *params) +{ + struct dwc3_ep *dep = dwc->eps[ep]; + unsigned long timeout = 500; + u32 reg; + + dev_vdbg(dwc->dev, "%s: cmd '%s' params %08x %08x %08x\n", + dep->name, + dwc3_gadget_ep_cmd_string(cmd), params->param0.raw, + params->param1.raw, params->param2.raw); + + dwc3_writel(dwc->regs, DWC3_DEPCMDPAR0(ep), params->param0.raw); + dwc3_writel(dwc->regs, DWC3_DEPCMDPAR1(ep), params->param1.raw); + dwc3_writel(dwc->regs, DWC3_DEPCMDPAR2(ep), params->param2.raw); + + dwc3_writel(dwc->regs, DWC3_DEPCMD(ep), cmd | DWC3_DEPCMD_CMDACT); + do { + reg = dwc3_readl(dwc->regs, DWC3_DEPCMD(ep)); + if (!(reg & DWC3_DEPCMD_CMDACT)) { + dev_vdbg(dwc->dev, "CMD Compl Status %d DEPCMD %04x\n", + ((reg & 0xf000) >> 12), reg); + return 0; + } + + /* + * XXX Figure out a sane timeout here. 500ms is way too much. + * We can't sleep here, because it is also called from + * interrupt context. + */ + timeout--; + if (!timeout) + return -ETIMEDOUT; + + mdelay(1); + } while (1); +} + +static dma_addr_t dwc3_trb_dma_offset(struct dwc3_ep *dep, + struct dwc3_trb_hw *trb) +{ + u32 offset = trb - dep->trb_pool; + + return dep->trb_pool_dma + offset; +} + +static int dwc3_alloc_trb_pool(struct dwc3_ep *dep) +{ + struct dwc3 *dwc = dep->dwc; + + if (dep->trb_pool) + return 0; + + if (dep->number == 0 || dep->number == 1) + return 0; + + dep->trb_pool = dma_alloc_coherent(dwc->dev, + sizeof(struct dwc3_trb) * DWC3_TRB_NUM, + &dep->trb_pool_dma, GFP_KERNEL); + if (!dep->trb_pool) { + dev_err(dep->dwc->dev, "failed to allocate trb pool for %s\n", + dep->name); + return -ENOMEM; + } + + return 0; +} + +static void dwc3_free_trb_pool(struct dwc3_ep *dep) +{ + struct dwc3 *dwc = dep->dwc; + + dma_free_coherent(dwc->dev, sizeof(struct dwc3_trb) * DWC3_TRB_NUM, + dep->trb_pool, dep->trb_pool_dma); + + dep->trb_pool = NULL; + dep->trb_pool_dma = 0; +} + +static int dwc3_gadget_start_config(struct dwc3 *dwc, struct dwc3_ep *dep) +{ + struct dwc3_gadget_ep_cmd_params params; + u32 cmd; + + memset(¶ms, 0x00, sizeof(params)); + + if (dep->number != 1) { + cmd = DWC3_DEPCMD_DEPSTARTCFG; + /* XferRscIdx == 0 for ep0 and 2 for the remaining */ + if (dep->number > 1) + cmd |= DWC3_DEPCMD_PARAM(2); + + return dwc3_send_gadget_ep_cmd(dwc, 0, cmd, ¶ms); + } + + return 0; +} + +static int dwc3_gadget_set_ep_config(struct dwc3 *dwc, struct dwc3_ep *dep, + const struct usb_endpoint_descriptor *desc) +{ + struct dwc3_gadget_ep_cmd_params params; + + memset(¶ms, 0x00, sizeof(params)); + + params.param0.depcfg.ep_type = usb_endpoint_type(desc); + params.param0.depcfg.max_packet_size = + le16_to_cpu(desc->wMaxPacketSize); + + params.param1.depcfg.xfer_complete_enable = true; + params.param1.depcfg.xfer_not_ready_enable = true; + + if (usb_endpoint_xfer_isoc(desc)) + params.param1.depcfg.xfer_in_progress_enable = true; + + /* + * We are doing 1:1 mapping for endpoints, meaning + * Physical Endpoints 2 maps to Logical Endpoint 2 and + * so on. We consider the direction bit as part of the physical + * endpoint number. So USB endpoint 0x81 is 0x03. + */ + params.param1.depcfg.ep_number = dep->number; + + /* + * We must use the lower 16 TX FIFOs even though + * HW might have more + */ + if (dep->direction) + params.param0.depcfg.fifo_number = dep->number >> 1; + + if (desc->bInterval) { + params.param1.depcfg.binterval_m1 = desc->bInterval - 1; + dep->interval = 1 << (desc->bInterval - 1); + } + + return dwc3_send_gadget_ep_cmd(dwc, dep->number, + DWC3_DEPCMD_SETEPCONFIG, ¶ms); +} + +static int dwc3_gadget_set_xfer_resource(struct dwc3 *dwc, struct dwc3_ep *dep) +{ + struct dwc3_gadget_ep_cmd_params params; + + memset(¶ms, 0x00, sizeof(params)); + + params.param0.depxfercfg.number_xfer_resources = 1; + + return dwc3_send_gadget_ep_cmd(dwc, dep->number, + DWC3_DEPCMD_SETTRANSFRESOURCE, ¶ms); +} + +/** + * __dwc3_gadget_ep_enable - Initializes a HW endpoint + * @dep: endpoint to be initialized + * @desc: USB Endpoint Descriptor + * + * Caller should take care of locking + */ +static int __dwc3_gadget_ep_enable(struct dwc3_ep *dep, + const struct usb_endpoint_descriptor *desc) +{ + struct dwc3 *dwc = dep->dwc; + u32 reg; + int ret = -ENOMEM; + + if (!(dep->flags & DWC3_EP_ENABLED)) { + ret = dwc3_gadget_start_config(dwc, dep); + if (ret) + return ret; + } + + ret = dwc3_gadget_set_ep_config(dwc, dep, desc); + if (ret) + return ret; + + if (!(dep->flags & DWC3_EP_ENABLED)) { + struct dwc3_trb_hw *trb_st_hw; + struct dwc3_trb_hw *trb_link_hw; + struct dwc3_trb trb_link; + + ret = dwc3_gadget_set_xfer_resource(dwc, dep); + if (ret) + return ret; + + dep->desc = desc; + dep->type = usb_endpoint_type(desc); + dep->flags |= DWC3_EP_ENABLED; + + reg = dwc3_readl(dwc->regs, DWC3_DALEPENA); + reg |= DWC3_DALEPENA_EP(dep->number); + dwc3_writel(dwc->regs, DWC3_DALEPENA, reg); + + if (!usb_endpoint_xfer_isoc(desc)) + return 0; + + memset(&trb_link, 0, sizeof(trb_link)); + + /* Link TRB for ISOC. The HWO but is never reset */ + trb_st_hw = &dep->trb_pool[0]; + + trb_link.bplh = dwc3_trb_dma_offset(dep, trb_st_hw); + trb_link.trbctl = DWC3_TRBCTL_LINK_TRB; + trb_link.hwo = true; + + trb_link_hw = &dep->trb_pool[DWC3_TRB_NUM - 1]; + dwc3_trb_to_hw(&trb_link, trb_link_hw); + } + + return 0; +} + +static void dwc3_gadget_nuke_reqs(struct dwc3_ep *dep, const int status) +{ + struct dwc3_request *req; + + while (!list_empty(&dep->request_list)) { + req = next_request(&dep->request_list); + + dwc3_gadget_giveback(dep, req, status); + } + /* nuke queued TRBs as well on command complete */ + dep->flags |= DWC3_EP_WILL_SHUTDOWN; +} + +/** + * __dwc3_gadget_ep_disable - Disables a HW endpoint + * @dep: the endpoint to disable + * + * Caller should take care of locking + */ +static void dwc3_stop_active_transfer(struct dwc3 *dwc, u32 epnum); +static int __dwc3_gadget_ep_disable(struct dwc3_ep *dep) +{ + struct dwc3 *dwc = dep->dwc; + u32 reg; + + dep->flags &= ~DWC3_EP_ENABLED; + dwc3_stop_active_transfer(dwc, dep->number); + dwc3_gadget_nuke_reqs(dep, -ESHUTDOWN); + + reg = dwc3_readl(dwc->regs, DWC3_DALEPENA); + reg &= ~DWC3_DALEPENA_EP(dep->number); + dwc3_writel(dwc->regs, DWC3_DALEPENA, reg); + + dep->desc = NULL; + dep->type = 0; + + return 0; +} + +/* -------------------------------------------------------------------------- */ + +static int dwc3_gadget_ep0_enable(struct usb_ep *ep, + const struct usb_endpoint_descriptor *desc) +{ + return -EINVAL; +} + +static int dwc3_gadget_ep0_disable(struct usb_ep *ep) +{ + return -EINVAL; +} + +/* -------------------------------------------------------------------------- */ + +static int dwc3_gadget_ep_enable(struct usb_ep *ep, + const struct usb_endpoint_descriptor *desc) +{ + struct dwc3_ep *dep; + struct dwc3 *dwc; + unsigned long flags; + int ret; + + if (!ep || !desc || desc->bDescriptorType != USB_DT_ENDPOINT) { + pr_debug("dwc3: invalid parameters\n"); + return -EINVAL; + } + + if (!desc->wMaxPacketSize) { + pr_debug("dwc3: missing wMaxPacketSize\n"); + return -EINVAL; + } + + dep = to_dwc3_ep(ep); + dwc = dep->dwc; + + switch (usb_endpoint_type(desc)) { + case USB_ENDPOINT_XFER_CONTROL: + strncat(dep->name, "-control", sizeof(dep->name)); + break; + case USB_ENDPOINT_XFER_ISOC: + strncat(dep->name, "-isoc", sizeof(dep->name)); + break; + case USB_ENDPOINT_XFER_BULK: + strncat(dep->name, "-bulk", sizeof(dep->name)); + break; + case USB_ENDPOINT_XFER_INT: + strncat(dep->name, "-int", sizeof(dep->name)); + break; + default: + dev_err(dwc->dev, "invalid endpoint transfer type\n"); + } + + if (dep->flags & DWC3_EP_ENABLED) { + dev_WARN_ONCE(dwc->dev, true, "%s is already enabled\n", + dep->name); + return 0; + } + + dev_vdbg(dwc->dev, "Enabling %s\n", dep->name); + + spin_lock_irqsave(&dwc->lock, flags); + ret = __dwc3_gadget_ep_enable(dep, desc); + spin_unlock_irqrestore(&dwc->lock, flags); + + return ret; +} + +static int dwc3_gadget_ep_disable(struct usb_ep *ep) +{ + struct dwc3_ep *dep; + struct dwc3 *dwc; + unsigned long flags; + int ret; + + if (!ep) { + pr_debug("dwc3: invalid parameters\n"); + return -EINVAL; + } + + dep = to_dwc3_ep(ep); + dwc = dep->dwc; + + if (!(dep->flags & DWC3_EP_ENABLED)) { + dev_WARN_ONCE(dwc->dev, true, "%s is already disabled\n", + dep->name); + return 0; + } + + snprintf(dep->name, sizeof(dep->name), "ep%d%s", + dep->number >> 1, + (dep->number & 1) ? "in" : "out"); + + spin_lock_irqsave(&dwc->lock, flags); + ret = __dwc3_gadget_ep_disable(dep); + spin_unlock_irqrestore(&dwc->lock, flags); + + return ret; +} + +static struct usb_request *dwc3_gadget_ep_alloc_request(struct usb_ep *ep, + gfp_t gfp_flags) +{ + struct dwc3_request *req; + struct dwc3_ep *dep = to_dwc3_ep(ep); + struct dwc3 *dwc = dep->dwc; + + req = kzalloc(sizeof(*req), gfp_flags); + if (!req) { + dev_err(dwc->dev, "not enough memory\n"); + return NULL; + } + + req->epnum = dep->number; + req->dep = dep; + req->request.dma = DMA_ADDR_INVALID; + + return &req->request; +} + +static void dwc3_gadget_ep_free_request(struct usb_ep *ep, + struct usb_request *request) +{ + struct dwc3_request *req = to_dwc3_request(request); + + kfree(req); +} + +/* + * dwc3_prepare_trbs - setup TRBs from requests + * @dep: endpoint for which requests are being prepared + * @starting: true if the endpoint is idle and no requests are queued. + * + * The functions goes through the requests list and setups TRBs for the + * transfers. The functions returns once there are not more TRBs available or + * it run out of requests. + */ +static struct dwc3_request *dwc3_prepare_trbs(struct dwc3_ep *dep, + bool starting) +{ + struct dwc3_request *req, *n, *ret = NULL; + struct dwc3_trb_hw *trb_hw; + struct dwc3_trb trb; + u32 trbs_left; + + BUILD_BUG_ON_NOT_POWER_OF_2(DWC3_TRB_NUM); + + /* the first request must not be queued */ + trbs_left = (dep->busy_slot - dep->free_slot) & DWC3_TRB_MASK; + /* + * if busy & slot are equal than it is either full or empty. If we are + * starting to proceed requests then we are empty. Otherwise we ar + * full and don't do anything + */ + if (!trbs_left) { + if (!starting) + return NULL; + trbs_left = DWC3_TRB_NUM; + /* + * In case we start from scratch, we queue the ISOC requests + * starting from slot 1. This is done because we use ring + * buffer and have no LST bit to stop us. Instead, we place + * IOC bit TRB_NUM/4. We try to avoid to having an interrupt + * after the first request so we start at slot 1 and have + * 7 requests proceed before we hit the first IOC. + * Other transfer types don't use the ring buffer and are + * processed from the first TRB until the last one. Since we + * don't wrap around we have to start at the beginning. + */ + if (usb_endpoint_xfer_isoc(dep->desc)) { + dep->busy_slot = 1; + dep->free_slot = 1; + } else { + dep->busy_slot = 0; + dep->free_slot = 0; + } + } + + /* The last TRB is a link TRB, not used for xfer */ + if ((trbs_left <= 1) && usb_endpoint_xfer_isoc(dep->desc)) + return NULL; + + list_for_each_entry_safe(req, n, &dep->request_list, list) { + unsigned int last_one = 0; + unsigned int cur_slot; + + trb_hw = &dep->trb_pool[dep->free_slot & DWC3_TRB_MASK]; + cur_slot = dep->free_slot; + dep->free_slot++; + + /* Skip the LINK-TRB on ISOC */ + if (((cur_slot & DWC3_TRB_MASK) == DWC3_TRB_NUM - 1) && + usb_endpoint_xfer_isoc(dep->desc)) + continue; + + dwc3_gadget_move_request_queued(req); + memset(&trb, 0, sizeof(trb)); + trbs_left--; + + /* Is our TRB pool empty? */ + if (!trbs_left) + last_one = 1; + /* Is this the last request? */ + if (list_empty(&dep->request_list)) + last_one = 1; + + /* + * FIXME we shouldn't need to set LST bit always but we are + * facing some weird problem with the Hardware where it doesn't + * complete even though it has been previously started. + * + * While we're debugging the problem, as a workaround to + * multiple TRBs handling, use only one TRB at a time. + */ + last_one = 1; + + req->trb = trb_hw; + if (!ret) + ret = req; + + trb.bplh = req->request.dma; + + if (usb_endpoint_xfer_isoc(dep->desc)) { + trb.isp_imi = true; + trb.csp = true; + } else { + trb.lst = last_one; + } + + switch (usb_endpoint_type(dep->desc)) { + case USB_ENDPOINT_XFER_CONTROL: + trb.trbctl = DWC3_TRBCTL_CONTROL_SETUP; + break; + + case USB_ENDPOINT_XFER_ISOC: + trb.trbctl = DWC3_TRBCTL_ISOCHRONOUS; + + /* IOC every DWC3_TRB_NUM / 4 so we can refill */ + if (!(cur_slot % (DWC3_TRB_NUM / 4))) + trb.ioc = last_one; + break; + + case USB_ENDPOINT_XFER_BULK: + case USB_ENDPOINT_XFER_INT: + trb.trbctl = DWC3_TRBCTL_NORMAL; + break; + default: + /* + * This is only possible with faulty memory because we + * checked it already :) + */ + BUG(); + } + + trb.length = req->request.length; + trb.hwo = true; + + dwc3_trb_to_hw(&trb, trb_hw); + req->trb_dma = dwc3_trb_dma_offset(dep, trb_hw); + + if (last_one) + break; + } + + return ret; +} + +static int __dwc3_gadget_kick_transfer(struct dwc3_ep *dep, u16 cmd_param, + int start_new) +{ + struct dwc3_gadget_ep_cmd_params params; + struct dwc3_request *req; + struct dwc3 *dwc = dep->dwc; + int ret; + u32 cmd; + + if (start_new && (dep->flags & DWC3_EP_BUSY)) { + dev_vdbg(dwc->dev, "%s: endpoint busy\n", dep->name); + return -EBUSY; + } + dep->flags &= ~DWC3_EP_PENDING_REQUEST; + + /* + * If we are getting here after a short-out-packet we don't enqueue any + * new requests as we try to set the IOC bit only on the last request. + */ + if (start_new) { + if (list_empty(&dep->req_queued)) + dwc3_prepare_trbs(dep, start_new); + + /* req points to the first request which will be sent */ + req = next_request(&dep->req_queued); + } else { + /* + * req points to the first request where HWO changed + * from 0 to 1 + */ + req = dwc3_prepare_trbs(dep, start_new); + } + if (!req) { + dep->flags |= DWC3_EP_PENDING_REQUEST; + return 0; + } + + memset(¶ms, 0, sizeof(params)); + params.param0.depstrtxfer.transfer_desc_addr_high = + upper_32_bits(req->trb_dma); + params.param1.depstrtxfer.transfer_desc_addr_low = + lower_32_bits(req->trb_dma); + + if (start_new) + cmd = DWC3_DEPCMD_STARTTRANSFER; + else + cmd = DWC3_DEPCMD_UPDATETRANSFER; + + cmd |= DWC3_DEPCMD_PARAM(cmd_param); + ret = dwc3_send_gadget_ep_cmd(dwc, dep->number, cmd, ¶ms); + if (ret < 0) { + dev_dbg(dwc->dev, "failed to send STARTTRANSFER command\n"); + + /* + * FIXME we need to iterate over the list of requests + * here and stop, unmap, free and del each of the linked + * requests instead of we do now. + */ + dwc3_unmap_buffer_from_dma(req); + list_del(&req->list); + return ret; + } + + dep->flags |= DWC3_EP_BUSY; + dep->res_trans_idx = dwc3_gadget_ep_get_transfer_index(dwc, + dep->number); + if (!dep->res_trans_idx) + printk_once(KERN_ERR "%s() res_trans_idx is invalid\n", __func__); + return 0; +} + +static int __dwc3_gadget_ep_queue(struct dwc3_ep *dep, struct dwc3_request *req) +{ + req->request.actual = 0; + req->request.status = -EINPROGRESS; + req->direction = dep->direction; + req->epnum = dep->number; + + /* + * We only add to our list of requests now and + * start consuming the list once we get XferNotReady + * IRQ. + * + * That way, we avoid doing anything that we don't need + * to do now and defer it until the point we receive a + * particular token from the Host side. + * + * This will also avoid Host cancelling URBs due to too + * many NACKs. + */ + dwc3_map_buffer_to_dma(req); + list_add_tail(&req->list, &dep->request_list); + + /* + * There is one special case: XferNotReady with + * empty list of requests. We need to kick the + * transfer here in that situation, otherwise + * we will be NAKing forever. + * + * If we get XferNotReady before gadget driver + * has a chance to queue a request, we will ACK + * the IRQ but won't be able to receive the data + * until the next request is queued. The following + * code is handling exactly that. + */ + if (dep->flags & DWC3_EP_PENDING_REQUEST) { + int ret; + int start_trans; + + start_trans = 1; + if (usb_endpoint_xfer_isoc(dep->endpoint.desc) && + dep->flags & DWC3_EP_BUSY) + start_trans = 0; + + ret = __dwc3_gadget_kick_transfer(dep, 0, start_trans); + if (ret && ret != -EBUSY) { + struct dwc3 *dwc = dep->dwc; + + dev_dbg(dwc->dev, "%s: failed to kick transfers\n", + dep->name); + } + }; + + return 0; +} + +static int dwc3_gadget_ep_queue(struct usb_ep *ep, struct usb_request *request, + gfp_t gfp_flags) +{ + struct dwc3_request *req = to_dwc3_request(request); + struct dwc3_ep *dep = to_dwc3_ep(ep); + struct dwc3 *dwc = dep->dwc; + + unsigned long flags; + + int ret; + + if (!dep->desc) { + dev_dbg(dwc->dev, "trying to queue request %p to disabled %s\n", + request, ep->name); + return -ESHUTDOWN; + } + + dev_vdbg(dwc->dev, "queing request %p to %s length %d\n", + request, ep->name, request->length); + + spin_lock_irqsave(&dwc->lock, flags); + ret = __dwc3_gadget_ep_queue(dep, req); + spin_unlock_irqrestore(&dwc->lock, flags); + + return ret; +} + +static int dwc3_gadget_ep_dequeue(struct usb_ep *ep, + struct usb_request *request) +{ + struct dwc3_request *req = to_dwc3_request(request); + struct dwc3_request *r = NULL; + + struct dwc3_ep *dep = to_dwc3_ep(ep); + struct dwc3 *dwc = dep->dwc; + + unsigned long flags; + int ret = 0; + + spin_lock_irqsave(&dwc->lock, flags); + + list_for_each_entry(r, &dep->request_list, list) { + if (r == req) + break; + } + + if (r != req) { + list_for_each_entry(r, &dep->req_queued, list) { + if (r == req) + break; + } + if (r == req) { + /* wait until it is processed */ + dwc3_stop_active_transfer(dwc, dep->number); + goto out0; + } + dev_err(dwc->dev, "request %p was not queued to %s\n", + request, ep->name); + ret = -EINVAL; + goto out0; + } + + /* giveback the request */ + dwc3_gadget_giveback(dep, req, -ECONNRESET); + +out0: + spin_unlock_irqrestore(&dwc->lock, flags); + + return ret; +} + +int __dwc3_gadget_ep_set_halt(struct dwc3_ep *dep, int value) +{ + struct dwc3_gadget_ep_cmd_params params; + struct dwc3 *dwc = dep->dwc; + int ret; + + memset(¶ms, 0x00, sizeof(params)); + + if (value) { + if (dep->number == 0 || dep->number == 1) + dwc->ep0state = EP0_STALL; + + ret = dwc3_send_gadget_ep_cmd(dwc, dep->number, + DWC3_DEPCMD_SETSTALL, ¶ms); + if (ret) + dev_err(dwc->dev, "failed to %s STALL on %s\n", + value ? "set" : "clear", + dep->name); + else + dep->flags |= DWC3_EP_STALL; + } else { + ret = dwc3_send_gadget_ep_cmd(dwc, dep->number, + DWC3_DEPCMD_CLEARSTALL, ¶ms); + if (ret) + dev_err(dwc->dev, "failed to %s STALL on %s\n", + value ? "set" : "clear", + dep->name); + else + dep->flags &= ~DWC3_EP_STALL; + } + return ret; +} + +static int dwc3_gadget_ep_set_halt(struct usb_ep *ep, int value) +{ + struct dwc3_ep *dep = to_dwc3_ep(ep); + struct dwc3 *dwc = dep->dwc; + + unsigned long flags; + + int ret; + + spin_lock_irqsave(&dwc->lock, flags); + + if (usb_endpoint_xfer_isoc(dep->desc)) { + dev_err(dwc->dev, "%s is of Isochronous type\n", dep->name); + ret = -EINVAL; + goto out; + } + + ret = __dwc3_gadget_ep_set_halt(dep, value); +out: + spin_unlock_irqrestore(&dwc->lock, flags); + + return ret; +} + +static int dwc3_gadget_ep_set_wedge(struct usb_ep *ep) +{ + struct dwc3_ep *dep = to_dwc3_ep(ep); + + dep->flags |= DWC3_EP_WEDGE; + + return usb_ep_set_halt(ep); +} + +/* -------------------------------------------------------------------------- */ + +static struct usb_endpoint_descriptor dwc3_gadget_ep0_desc = { + .bLength = USB_DT_ENDPOINT_SIZE, + .bDescriptorType = USB_DT_ENDPOINT, + .bmAttributes = USB_ENDPOINT_XFER_CONTROL, +}; + +static const struct usb_ep_ops dwc3_gadget_ep0_ops = { + .enable = dwc3_gadget_ep0_enable, + .disable = dwc3_gadget_ep0_disable, + .alloc_request = dwc3_gadget_ep_alloc_request, + .free_request = dwc3_gadget_ep_free_request, + .queue = dwc3_gadget_ep0_queue, + .dequeue = dwc3_gadget_ep_dequeue, + .set_halt = dwc3_gadget_ep_set_halt, + .set_wedge = dwc3_gadget_ep_set_wedge, +}; + +static const struct usb_ep_ops dwc3_gadget_ep_ops = { + .enable = dwc3_gadget_ep_enable, + .disable = dwc3_gadget_ep_disable, + .alloc_request = dwc3_gadget_ep_alloc_request, + .free_request = dwc3_gadget_ep_free_request, + .queue = dwc3_gadget_ep_queue, + .dequeue = dwc3_gadget_ep_dequeue, + .set_halt = dwc3_gadget_ep_set_halt, + .set_wedge = dwc3_gadget_ep_set_wedge, +}; + +/* -------------------------------------------------------------------------- */ + +static int dwc3_gadget_get_frame(struct usb_gadget *g) +{ + struct dwc3 *dwc = gadget_to_dwc(g); + u32 reg; + + reg = dwc3_readl(dwc->regs, DWC3_DSTS); + return DWC3_DSTS_SOFFN(reg); +} + +static int dwc3_gadget_wakeup(struct usb_gadget *g) +{ + struct dwc3 *dwc = gadget_to_dwc(g); + + unsigned long timeout; + unsigned long flags; + + u32 reg; + + int ret = 0; + + u8 link_state; + u8 speed; + + spin_lock_irqsave(&dwc->lock, flags); + + /* + * According to the Databook Remote wakeup request should + * be issued only when the device is in early suspend state. + * + * We can check that via USB Link State bits in DSTS register. + */ + reg = dwc3_readl(dwc->regs, DWC3_DSTS); + + speed = reg & DWC3_DSTS_CONNECTSPD; + if (speed == DWC3_DSTS_SUPERSPEED) { + dev_dbg(dwc->dev, "no wakeup on SuperSpeed\n"); + ret = -EINVAL; + goto out; + } + + link_state = DWC3_DSTS_USBLNKST(reg); + + switch (link_state) { + case DWC3_LINK_STATE_RX_DET: /* in HS, means Early Suspend */ + case DWC3_LINK_STATE_U3: /* in HS, means SUSPEND */ + break; + default: + dev_dbg(dwc->dev, "can't wakeup from link state %d\n", + link_state); + ret = -EINVAL; + goto out; + } + + reg = dwc3_readl(dwc->regs, DWC3_DCTL); + + /* + * Switch link state to Recovery. In HS/FS/LS this means + * RemoteWakeup Request + */ + reg |= DWC3_DCTL_ULSTCHNG_RECOVERY; + dwc3_writel(dwc->regs, DWC3_DCTL, reg); + + /* wait for at least 2000us */ + usleep_range(2000, 2500); + + /* write zeroes to Link Change Request */ + reg &= ~DWC3_DCTL_ULSTCHNGREQ_MASK; + dwc3_writel(dwc->regs, DWC3_DCTL, reg); + + /* pool until Link State change to ON */ + timeout = jiffies + msecs_to_jiffies(100); + + while (!(time_after(jiffies, timeout))) { + reg = dwc3_readl(dwc->regs, DWC3_DSTS); + + /* in HS, means ON */ + if (DWC3_DSTS_USBLNKST(reg) == DWC3_LINK_STATE_U0) + break; + } + + if (DWC3_DSTS_USBLNKST(reg) != DWC3_LINK_STATE_U0) { + dev_err(dwc->dev, "failed to send remote wakeup\n"); + ret = -EINVAL; + } + +out: + spin_unlock_irqrestore(&dwc->lock, flags); + + return ret; +} + +static int dwc3_gadget_set_selfpowered(struct usb_gadget *g, + int is_selfpowered) +{ + struct dwc3 *dwc = gadget_to_dwc(g); + + dwc->is_selfpowered = !!is_selfpowered; + + return 0; +} + +static void dwc3_gadget_run_stop(struct dwc3 *dwc, int is_on) +{ + u32 reg; + unsigned long timeout = 500; + + reg = dwc3_readl(dwc->regs, DWC3_DCTL); + if (is_on) + reg |= DWC3_DCTL_RUN_STOP; + else + reg &= ~DWC3_DCTL_RUN_STOP; + + dwc3_writel(dwc->regs, DWC3_DCTL, reg); + + do { + reg = dwc3_readl(dwc->regs, DWC3_DSTS); + if (is_on) { + if (!(reg & DWC3_DSTS_DEVCTRLHLT)) + break; + } else { + if (reg & DWC3_DSTS_DEVCTRLHLT) + break; + } + /* + * XXX reduce the 500ms delay + */ + timeout--; + if (!timeout) + break; + mdelay(1); + } while (1); + + dev_vdbg(dwc->dev, "gadget %s data soft-%s\n", + dwc->gadget_driver + ? dwc->gadget_driver->function : "no-function", + is_on ? "connect" : "disconnect"); +} + +static int dwc3_gadget_pullup(struct usb_gadget *g, int is_on) +{ + struct dwc3 *dwc = gadget_to_dwc(g); + unsigned long flags; + + is_on = !!is_on; + + spin_lock_irqsave(&dwc->lock, flags); + dwc3_gadget_run_stop(dwc, is_on); + spin_unlock_irqrestore(&dwc->lock, flags); + + return 0; +} + +static int dwc3_gadget_start(struct usb_gadget *g, + struct usb_gadget_driver *driver) +{ + struct dwc3 *dwc = gadget_to_dwc(g); + struct dwc3_ep *dep; + unsigned long flags; + int ret = 0; + u32 reg; + + spin_lock_irqsave(&dwc->lock, flags); + + if (dwc->gadget_driver) { + dev_err(dwc->dev, "%s is already bound to %s\n", + dwc->gadget.name, + dwc->gadget_driver->driver.name); + ret = -EBUSY; + goto err0; + } + + dwc->gadget_driver = driver; + dwc->gadget.dev.driver = &driver->driver; + + reg = dwc3_readl(dwc->regs, DWC3_GCTL); + + /* + * REVISIT: power down scale might be different + * depending on PHY used, need to pass that via platform_data + */ + reg |= DWC3_GCTL_PWRDNSCALE(0x61a) + | DWC3_GCTL_PRTCAPDIR(DWC3_GCTL_PRTCAP_DEVICE); + reg &= ~DWC3_GCTL_DISSCRAMBLE; + + /* + * WORKAROUND: DWC3 revisions <1.90a have a bug + * when The device fails to connect at SuperSpeed + * and falls back to high-speed mode which causes + * the device to enter in a Connect/Disconnect loop + */ + if (dwc->revision < DWC3_REVISION_190A) + reg |= DWC3_GCTL_U2RSTECN; + + dwc3_writel(dwc->regs, DWC3_GCTL, reg); + + reg = dwc3_readl(dwc->regs, DWC3_DCFG); + reg &= ~(DWC3_DCFG_SPEED_MASK); + reg |= DWC3_DCFG_SUPERSPEED; + dwc3_writel(dwc->regs, DWC3_DCFG, reg); + + /* Start with SuperSpeed Default */ + dwc3_gadget_ep0_desc.wMaxPacketSize = cpu_to_le16(512); + + dep = dwc->eps[0]; + ret = __dwc3_gadget_ep_enable(dep, &dwc3_gadget_ep0_desc); + if (ret) { + dev_err(dwc->dev, "failed to enable %s\n", dep->name); + goto err0; + } + + dep = dwc->eps[1]; + ret = __dwc3_gadget_ep_enable(dep, &dwc3_gadget_ep0_desc); + if (ret) { + dev_err(dwc->dev, "failed to enable %s\n", dep->name); + goto err1; + } + + /* begin to receive SETUP packets */ + dwc->ep0state = EP0_IDLE; + dwc3_ep0_out_start(dwc); + + spin_unlock_irqrestore(&dwc->lock, flags); + + return 0; + +err1: + __dwc3_gadget_ep_disable(dwc->eps[0]); + +err0: + spin_unlock_irqrestore(&dwc->lock, flags); + + return ret; +} + +static int dwc3_gadget_stop(struct usb_gadget *g, + struct usb_gadget_driver *driver) +{ + struct dwc3 *dwc = gadget_to_dwc(g); + unsigned long flags; + + spin_lock_irqsave(&dwc->lock, flags); + + __dwc3_gadget_ep_disable(dwc->eps[0]); + __dwc3_gadget_ep_disable(dwc->eps[1]); + + dwc->gadget_driver = NULL; + dwc->gadget.dev.driver = NULL; + + spin_unlock_irqrestore(&dwc->lock, flags); + + return 0; +} +static const struct usb_gadget_ops dwc3_gadget_ops = { + .get_frame = dwc3_gadget_get_frame, + .wakeup = dwc3_gadget_wakeup, + .set_selfpowered = dwc3_gadget_set_selfpowered, + .pullup = dwc3_gadget_pullup, + .udc_start = dwc3_gadget_start, + .udc_stop = dwc3_gadget_stop, +}; + +/* -------------------------------------------------------------------------- */ + +static int __devinit dwc3_gadget_init_endpoints(struct dwc3 *dwc) +{ + struct dwc3_ep *dep; + u8 epnum; + + INIT_LIST_HEAD(&dwc->gadget.ep_list); + + for (epnum = 0; epnum < DWC3_ENDPOINTS_NUM; epnum++) { + dep = kzalloc(sizeof(*dep), GFP_KERNEL); + if (!dep) { + dev_err(dwc->dev, "can't allocate endpoint %d\n", + epnum); + return -ENOMEM; + } + + dep->dwc = dwc; + dep->number = epnum; + dwc->eps[epnum] = dep; + + snprintf(dep->name, sizeof(dep->name), "ep%d%s", epnum >> 1, + (epnum & 1) ? "in" : "out"); + dep->endpoint.name = dep->name; + dep->direction = (epnum & 1); + + if (epnum == 0 || epnum == 1) { + dep->endpoint.maxpacket = 512; + dep->endpoint.ops = &dwc3_gadget_ep0_ops; + if (!epnum) + dwc->gadget.ep0 = &dep->endpoint; + } else { + int ret; + + dep->endpoint.maxpacket = 1024; + dep->endpoint.ops = &dwc3_gadget_ep_ops; + list_add_tail(&dep->endpoint.ep_list, + &dwc->gadget.ep_list); + + ret = dwc3_alloc_trb_pool(dep); + if (ret) { + dev_err(dwc->dev, "%s: failed to allocate TRB pool\n", dep->name); + return ret; + } + } + INIT_LIST_HEAD(&dep->request_list); + INIT_LIST_HEAD(&dep->req_queued); + } + + return 0; +} + +static void dwc3_gadget_free_endpoints(struct dwc3 *dwc) +{ + struct dwc3_ep *dep; + u8 epnum; + + for (epnum = 0; epnum < DWC3_ENDPOINTS_NUM; epnum++) { + dep = dwc->eps[epnum]; + dwc3_free_trb_pool(dep); + + if (epnum != 0 && epnum != 1) + list_del(&dep->endpoint.ep_list); + + kfree(dep); + } +} + +static void dwc3_gadget_release(struct device *dev) +{ + dev_dbg(dev, "%s\n", __func__); +} + +/* -------------------------------------------------------------------------- */ +static int dwc3_cleanup_done_reqs(struct dwc3 *dwc, struct dwc3_ep *dep, + const struct dwc3_event_depevt *event, int status) +{ + struct dwc3_request *req; + struct dwc3_trb trb; + unsigned int count; + unsigned int s_pkt = 0; + + do { + req = next_request(&dep->req_queued); + if (!req) + break; + + dwc3_trb_to_nat(req->trb, &trb); + + if (trb.hwo) { + dev_err(dwc->dev, "%s's TRB (%p) still owned by HW\n", + dep->name, req->trb); + continue; + } + count = trb.length; + + if (dep->direction) { + if (count) { + dev_err(dwc->dev, "incomplete IN transfer %s\n", + dep->name); + status = -ECONNRESET; + } + } else { + if (count && (event->status & DEPEVT_STATUS_SHORT)) + s_pkt = 1; + } + + /* + * We assume here we will always receive the entire data block + * which we should receive. Meaning, if we program RX to + * receive 4K but we receive only 2K, we assume that's all we + * should receive and we simply bounce the request back to the + * gadget driver for further processing. + */ + req->request.actual += req->request.length - count; + dwc3_gadget_giveback(dep, req, status); + if (s_pkt) + break; + if ((event->status & DEPEVT_STATUS_LST) && trb.lst) + break; + if ((event->status & DEPEVT_STATUS_IOC) && trb.ioc) + break; + } while (1); + + if ((event->status & DEPEVT_STATUS_IOC) && trb.ioc) + return 0; + return 1; +} + +static void dwc3_endpoint_transfer_complete(struct dwc3 *dwc, + struct dwc3_ep *dep, const struct dwc3_event_depevt *event, + int start_new) +{ + unsigned status = 0; + int clean_busy; + + if (event->status & DEPEVT_STATUS_BUSERR) + status = -ECONNRESET; + + clean_busy = dwc3_cleanup_done_reqs(dwc, dep, event, status); + if (clean_busy) + dep->flags &= ~DWC3_EP_BUSY; +} + +static void dwc3_gadget_start_isoc(struct dwc3 *dwc, + struct dwc3_ep *dep, const struct dwc3_event_depevt *event) +{ + u32 uf; + + if (list_empty(&dep->request_list)) { + dev_vdbg(dwc->dev, "ISOC ep %s run out for requests.\n", + dep->name); + return; + } + + if (event->parameters) { + u32 mask; + + mask = ~(dep->interval - 1); + uf = event->parameters & mask; + /* 4 micro frames in the future */ + uf += dep->interval * 4; + } else { + uf = 0; + } + + __dwc3_gadget_kick_transfer(dep, uf, 1); +} + +static void dwc3_process_ep_cmd_complete(struct dwc3_ep *dep, + const struct dwc3_event_depevt *event) +{ + struct dwc3 *dwc = dep->dwc; + struct dwc3_event_depevt mod_ev = *event; + + /* + * We were asked to remove one requests. It is possible that this + * request and a few other were started together and have the same + * transfer index. Since we stopped the complete endpoint we don't + * know how many requests were already completed (and not yet) + * reported and how could be done (later). We purge them all until + * the end of the list. + */ + mod_ev.status = DEPEVT_STATUS_LST; + dwc3_cleanup_done_reqs(dwc, dep, &mod_ev, -ESHUTDOWN); + dep->flags &= ~DWC3_EP_BUSY; + /* pending requets are ignored and are queued on XferNotReady */ + + if (dep->flags & DWC3_EP_WILL_SHUTDOWN) { + while (!list_empty(&dep->req_queued)) { + struct dwc3_request *req; + + req = next_request(&dep->req_queued); + dwc3_gadget_giveback(dep, req, -ESHUTDOWN); + } + dep->flags &= DWC3_EP_WILL_SHUTDOWN; + } +} + +static void dwc3_ep_cmd_compl(struct dwc3_ep *dep, + const struct dwc3_event_depevt *event) +{ + u32 param = event->parameters; + u32 cmd_type = (param >> 8) & ((1 << 5) - 1); + + switch (cmd_type) { + case DWC3_DEPCMD_ENDTRANSFER: + dwc3_process_ep_cmd_complete(dep, event); + break; + case DWC3_DEPCMD_STARTTRANSFER: + dep->res_trans_idx = param & 0x7f; + break; + default: + printk(KERN_ERR "%s() unknown /unexpected type: %d\n", + __func__, cmd_type); + break; + }; +} + +static void dwc3_endpoint_interrupt(struct dwc3 *dwc, + const struct dwc3_event_depevt *event) +{ + struct dwc3_ep *dep; + u8 epnum = event->endpoint_number; + + dep = dwc->eps[epnum]; + + dev_vdbg(dwc->dev, "%s: %s\n", dep->name, + dwc3_ep_event_string(event->endpoint_event)); + + if (epnum == 0 || epnum == 1) { + dwc3_ep0_interrupt(dwc, event); + return; + } + + switch (event->endpoint_event) { + case DWC3_DEPEVT_XFERCOMPLETE: + if (usb_endpoint_xfer_isoc(dep->desc)) { + dev_dbg(dwc->dev, "%s is an Isochronous endpoint\n", + dep->name); + return; + } + + dwc3_endpoint_transfer_complete(dwc, dep, event, 1); + break; + case DWC3_DEPEVT_XFERINPROGRESS: + if (!usb_endpoint_xfer_isoc(dep->desc)) { + dev_dbg(dwc->dev, "%s is not an Isochronous endpoint\n", + dep->name); + return; + } + + dwc3_endpoint_transfer_complete(dwc, dep, event, 0); + break; + case DWC3_DEPEVT_XFERNOTREADY: + if (usb_endpoint_xfer_isoc(dep->desc)) { + dwc3_gadget_start_isoc(dwc, dep, event); + } else { + int ret; + + dev_vdbg(dwc->dev, "%s: reason %s\n", + dep->name, event->status + ? "Transfer Active" + : "Transfer Not Active"); + + ret = __dwc3_gadget_kick_transfer(dep, 0, 1); + if (!ret || ret == -EBUSY) + return; + + dev_dbg(dwc->dev, "%s: failed to kick transfers\n", + dep->name); + } + + break; + case DWC3_DEPEVT_RXTXFIFOEVT: + dev_dbg(dwc->dev, "%s FIFO Overrun\n", dep->name); + break; + case DWC3_DEPEVT_STREAMEVT: + dev_dbg(dwc->dev, "%s Stream Event\n", dep->name); + break; + case DWC3_DEPEVT_EPCMDCMPLT: + dwc3_ep_cmd_compl(dep, event); + break; + } +} + +static void dwc3_disconnect_gadget(struct dwc3 *dwc) +{ + if (dwc->gadget_driver && dwc->gadget_driver->disconnect) { + spin_unlock(&dwc->lock); + dwc->gadget_driver->disconnect(&dwc->gadget); + spin_lock(&dwc->lock); + } +} + +static void dwc3_stop_active_transfer(struct dwc3 *dwc, u32 epnum) +{ + struct dwc3_ep *dep; + struct dwc3_gadget_ep_cmd_params params; + u32 cmd; + int ret; + + dep = dwc->eps[epnum]; + + if (dep->res_trans_idx) { + cmd = DWC3_DEPCMD_ENDTRANSFER; + cmd |= DWC3_DEPCMD_HIPRI_FORCERM | DWC3_DEPCMD_CMDIOC; + cmd |= DWC3_DEPCMD_PARAM(dep->res_trans_idx); + memset(¶ms, 0, sizeof(params)); + ret = dwc3_send_gadget_ep_cmd(dwc, dep->number, cmd, ¶ms); + WARN_ON_ONCE(ret); + } +} + +static void dwc3_stop_active_transfers(struct dwc3 *dwc) +{ + u32 epnum; + + for (epnum = 2; epnum < DWC3_ENDPOINTS_NUM; epnum++) { + struct dwc3_ep *dep; + + dep = dwc->eps[epnum]; + if (!(dep->flags & DWC3_EP_ENABLED)) + continue; + + __dwc3_gadget_ep_disable(dep); + } +} + +static void dwc3_clear_stall_all_ep(struct dwc3 *dwc) +{ + u32 epnum; + + for (epnum = 1; epnum < DWC3_ENDPOINTS_NUM; epnum++) { + struct dwc3_ep *dep; + struct dwc3_gadget_ep_cmd_params params; + int ret; + + dep = dwc->eps[epnum]; + + if (!(dep->flags & DWC3_EP_STALL)) + continue; + + dep->flags &= ~DWC3_EP_STALL; + + memset(¶ms, 0, sizeof(params)); + ret = dwc3_send_gadget_ep_cmd(dwc, dep->number, + DWC3_DEPCMD_CLEARSTALL, ¶ms); + WARN_ON_ONCE(ret); + } +} + +static void dwc3_gadget_disconnect_interrupt(struct dwc3 *dwc) +{ + dev_vdbg(dwc->dev, "%s\n", __func__); +#if 0 + XXX + U1/U2 is powersave optimization. Skip it for now. Anyway we need to + enable it before we can disable it. + + reg = dwc3_readl(dwc->regs, DWC3_DCTL); + reg &= ~DWC3_DCTL_INITU1ENA; + dwc3_writel(dwc->regs, DWC3_DCTL, reg); + + reg &= ~DWC3_DCTL_INITU2ENA; + dwc3_writel(dwc->regs, DWC3_DCTL, reg); +#endif + + dwc3_stop_active_transfers(dwc); + dwc3_disconnect_gadget(dwc); + + dwc->gadget.speed = USB_SPEED_UNKNOWN; +} + +static void dwc3_gadget_usb3_phy_power(struct dwc3 *dwc, int on) +{ + u32 reg; + + reg = dwc3_readl(dwc->regs, DWC3_GUSB3PIPECTL(0)); + + if (on) + reg &= ~DWC3_GUSB3PIPECTL_SUSPHY; + else + reg |= DWC3_GUSB3PIPECTL_SUSPHY; + + dwc3_writel(dwc->regs, DWC3_GUSB3PIPECTL(0), reg); +} + +static void dwc3_gadget_usb2_phy_power(struct dwc3 *dwc, int on) +{ + u32 reg; + + reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0)); + + if (on) + reg &= ~DWC3_GUSB2PHYCFG_SUSPHY; + else + reg |= DWC3_GUSB2PHYCFG_SUSPHY; + + dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), reg); +} + +static void dwc3_gadget_reset_interrupt(struct dwc3 *dwc) +{ + u32 reg; + + dev_vdbg(dwc->dev, "%s\n", __func__); + + /* Enable PHYs */ + dwc3_gadget_usb2_phy_power(dwc, true); + dwc3_gadget_usb3_phy_power(dwc, true); + + if (dwc->gadget.speed != USB_SPEED_UNKNOWN) + dwc3_disconnect_gadget(dwc); + + reg = dwc3_readl(dwc->regs, DWC3_DCTL); + reg &= ~DWC3_DCTL_TSTCTRL_MASK; + dwc3_writel(dwc->regs, DWC3_DCTL, reg); + + dwc3_stop_active_transfers(dwc); + dwc3_clear_stall_all_ep(dwc); + + /* Reset device address to zero */ + reg = dwc3_readl(dwc->regs, DWC3_DCFG); + reg &= ~(DWC3_DCFG_DEVADDR_MASK); + dwc3_writel(dwc->regs, DWC3_DCFG, reg); + + /* + * Wait for RxFifo to drain + * + * REVISIT probably shouldn't wait forever. + * In case Hardware ends up in a screwed up + * case, we error out, notify the user and, + * maybe, WARN() or BUG() but leave the rest + * of the kernel working fine. + * + * REVISIT the below is rather CPU intensive, + * maybe we should read and if it doesn't work + * sleep (not busy wait) for a few useconds. + * + * REVISIT why wait until the RXFIFO is empty anyway? + */ + while (!(dwc3_readl(dwc->regs, DWC3_DSTS) + & DWC3_DSTS_RXFIFOEMPTY)) + cpu_relax(); +} + +static void dwc3_update_ram_clk_sel(struct dwc3 *dwc, u32 speed) +{ + u32 reg; + u32 usb30_clock = DWC3_GCTL_CLK_BUS; + + /* + * We change the clock only at SS but I dunno why I would want to do + * this. Maybe it becomes part of the power saving plan. + */ + + if (speed != DWC3_DSTS_SUPERSPEED) + return; + + /* + * RAMClkSel is reset to 0 after USB reset, so it must be reprogrammed + * each time on Connect Done. + */ + if (!usb30_clock) + return; + + reg = dwc3_readl(dwc->regs, DWC3_GCTL); + reg |= DWC3_GCTL_RAMCLKSEL(usb30_clock); + dwc3_writel(dwc->regs, DWC3_GCTL, reg); +} + +static void dwc3_gadget_disable_phy(struct dwc3 *dwc, u8 speed) +{ + switch (speed) { + case USB_SPEED_SUPER: + dwc3_gadget_usb2_phy_power(dwc, false); + break; + case USB_SPEED_HIGH: + case USB_SPEED_FULL: + case USB_SPEED_LOW: + dwc3_gadget_usb3_phy_power(dwc, false); + break; + } +} + +static void dwc3_gadget_conndone_interrupt(struct dwc3 *dwc) +{ + struct dwc3_gadget_ep_cmd_params params; + struct dwc3_ep *dep; + int ret; + u32 reg; + u8 speed; + + dev_vdbg(dwc->dev, "%s\n", __func__); + + memset(¶ms, 0x00, sizeof(params)); + + dwc->ep0state = EP0_IDLE; + reg = dwc3_readl(dwc->regs, DWC3_DSTS); + speed = reg & DWC3_DSTS_CONNECTSPD; + dwc->speed = speed; + + dwc3_update_ram_clk_sel(dwc, speed); + + switch (speed) { + case DWC3_DCFG_SUPERSPEED: + dwc3_gadget_ep0_desc.wMaxPacketSize = cpu_to_le16(512); + dwc->gadget.ep0->maxpacket = 512; + dwc->gadget.speed = USB_SPEED_SUPER; + break; + case DWC3_DCFG_HIGHSPEED: + dwc3_gadget_ep0_desc.wMaxPacketSize = cpu_to_le16(64); + dwc->gadget.ep0->maxpacket = 64; + dwc->gadget.speed = USB_SPEED_HIGH; + break; + case DWC3_DCFG_FULLSPEED2: + case DWC3_DCFG_FULLSPEED1: + dwc3_gadget_ep0_desc.wMaxPacketSize = cpu_to_le16(64); + dwc->gadget.ep0->maxpacket = 64; + dwc->gadget.speed = USB_SPEED_FULL; + break; + case DWC3_DCFG_LOWSPEED: + dwc3_gadget_ep0_desc.wMaxPacketSize = cpu_to_le16(8); + dwc->gadget.ep0->maxpacket = 8; + dwc->gadget.speed = USB_SPEED_LOW; + break; + } + + /* Disable unneded PHY */ + dwc3_gadget_disable_phy(dwc, dwc->gadget.speed); + + dep = dwc->eps[0]; + ret = __dwc3_gadget_ep_enable(dep, &dwc3_gadget_ep0_desc); + if (ret) { + dev_err(dwc->dev, "failed to enable %s\n", dep->name); + return; + } + + dep = dwc->eps[1]; + ret = __dwc3_gadget_ep_enable(dep, &dwc3_gadget_ep0_desc); + if (ret) { + dev_err(dwc->dev, "failed to enable %s\n", dep->name); + return; + } + + /* + * Configure PHY via GUSB3PIPECTLn if required. + * + * Update GTXFIFOSIZn + * + * In both cases reset values should be sufficient. + */ +} + +static void dwc3_gadget_wakeup_interrupt(struct dwc3 *dwc) +{ + dev_vdbg(dwc->dev, "%s\n", __func__); + + /* + * TODO take core out of low power mode when that's + * implemented. + */ + + dwc->gadget_driver->resume(&dwc->gadget); +} + +static void dwc3_gadget_linksts_change_interrupt(struct dwc3 *dwc, + unsigned int evtinfo) +{ + dev_vdbg(dwc->dev, "%s\n", __func__); + + /* The fith bit says SuperSpeed yes or no. */ + dwc->link_state = evtinfo & DWC3_LINK_STATE_MASK; +} + +static void dwc3_gadget_interrupt(struct dwc3 *dwc, + const struct dwc3_event_devt *event) +{ + switch (event->type) { + case DWC3_DEVICE_EVENT_DISCONNECT: + dwc3_gadget_disconnect_interrupt(dwc); + break; + case DWC3_DEVICE_EVENT_RESET: + dwc3_gadget_reset_interrupt(dwc); + break; + case DWC3_DEVICE_EVENT_CONNECT_DONE: + dwc3_gadget_conndone_interrupt(dwc); + break; + case DWC3_DEVICE_EVENT_WAKEUP: + dwc3_gadget_wakeup_interrupt(dwc); + break; + case DWC3_DEVICE_EVENT_LINK_STATUS_CHANGE: + dwc3_gadget_linksts_change_interrupt(dwc, event->event_info); + break; + case DWC3_DEVICE_EVENT_EOPF: + dev_vdbg(dwc->dev, "End of Periodic Frame\n"); + break; + case DWC3_DEVICE_EVENT_SOF: + dev_vdbg(dwc->dev, "Start of Periodic Frame\n"); + break; + case DWC3_DEVICE_EVENT_ERRATIC_ERROR: + dev_vdbg(dwc->dev, "Erratic Error\n"); + break; + case DWC3_DEVICE_EVENT_CMD_CMPL: + dev_vdbg(dwc->dev, "Command Complete\n"); + break; + case DWC3_DEVICE_EVENT_OVERFLOW: + dev_vdbg(dwc->dev, "Overflow\n"); + break; + default: + dev_dbg(dwc->dev, "UNKNOWN IRQ %d\n", event->type); + } +} + +static void dwc3_process_event_entry(struct dwc3 *dwc, + const union dwc3_event *event) +{ + /* Endpoint IRQ, handle it and return early */ + if (event->type.is_devspec == 0) { + /* depevt */ + return dwc3_endpoint_interrupt(dwc, &event->depevt); + } + + switch (event->type.type) { + case DWC3_EVENT_TYPE_DEV: + dwc3_gadget_interrupt(dwc, &event->devt); + break; + /* REVISIT what to do with Carkit and I2C events ? */ + default: + dev_err(dwc->dev, "UNKNOWN IRQ type %d\n", event->raw); + } +} + +static irqreturn_t dwc3_process_event_buf(struct dwc3 *dwc, u32 buf) +{ + struct dwc3_event_buffer *evt; + int left; + u32 count; + + count = dwc3_readl(dwc->regs, DWC3_GEVNTCOUNT(buf)); + count &= DWC3_GEVNTCOUNT_MASK; + if (!count) + return IRQ_NONE; + + evt = dwc->ev_buffs[buf]; + left = count; + + while (left > 0) { + union dwc3_event event; + + memcpy(&event.raw, (evt->buf + evt->lpos), sizeof(event.raw)); + dwc3_process_event_entry(dwc, &event); + /* + * XXX we wrap around correctly to the next entry as almost all + * entries are 4 bytes in size. There is one entry which has 12 + * bytes which is a regular entry followed by 8 bytes data. ATM + * I don't know how things are organized if were get next to the + * a boundary so I worry about that once we try to handle that. + */ + evt->lpos = (evt->lpos + 4) % DWC3_EVENT_BUFFERS_SIZE; + left -= 4; + + dwc3_writel(dwc->regs, DWC3_GEVNTCOUNT(buf), 4); + } + + return IRQ_HANDLED; +} + +static irqreturn_t dwc3_interrupt(int irq, void *_dwc) +{ + struct dwc3 *dwc = _dwc; + int i; + irqreturn_t ret = IRQ_NONE; + + spin_lock(&dwc->lock); + + for (i = 0; i < DWC3_EVENT_BUFFERS_NUM; i++) { + irqreturn_t status; + + status = dwc3_process_event_buf(dwc, i); + if (status == IRQ_HANDLED) + ret = status; + } + + spin_unlock(&dwc->lock); + + return ret; +} + +/** + * dwc3_gadget_init - Initializes gadget related registers + * @dwc: Pointer to out controller context structure + * + * Returns 0 on success otherwise negative errno. + */ +int __devinit dwc3_gadget_init(struct dwc3 *dwc) +{ + u32 reg; + int ret; + int irq; + + dwc->ctrl_req = dma_alloc_coherent(dwc->dev, sizeof(*dwc->ctrl_req), + &dwc->ctrl_req_addr, GFP_KERNEL); + if (!dwc->ctrl_req) { + dev_err(dwc->dev, "failed to allocate ctrl request\n"); + ret = -ENOMEM; + goto err0; + } + + dwc->ep0_trb = dma_alloc_coherent(dwc->dev, sizeof(*dwc->ep0_trb), + &dwc->ep0_trb_addr, GFP_KERNEL); + if (!dwc->ep0_trb) { + dev_err(dwc->dev, "failed to allocate ep0 trb\n"); + ret = -ENOMEM; + goto err1; + } + + dwc->setup_buf = dma_alloc_coherent(dwc->dev, + sizeof(*dwc->setup_buf) * 2, + &dwc->setup_buf_addr, GFP_KERNEL); + if (!dwc->setup_buf) { + dev_err(dwc->dev, "failed to allocate setup buffer\n"); + ret = -ENOMEM; + goto err2; + } + + dev_set_name(&dwc->gadget.dev, "gadget"); + + dwc->gadget.ops = &dwc3_gadget_ops; + dwc->gadget.is_dualspeed = true; + dwc->gadget.speed = USB_SPEED_UNKNOWN; + dwc->gadget.dev.parent = dwc->dev; + + dma_set_coherent_mask(&dwc->gadget.dev, dwc->dev->coherent_dma_mask); + + dwc->gadget.dev.dma_parms = dwc->dev->dma_parms; + dwc->gadget.dev.dma_mask = dwc->dev->dma_mask; + dwc->gadget.dev.release = dwc3_gadget_release; + dwc->gadget.name = "dwc3-gadget"; + + /* + * REVISIT: Here we should clear all pending IRQs to be + * sure we're starting from a well known location. + */ + + ret = dwc3_gadget_init_endpoints(dwc); + if (ret) + goto err3; + + irq = platform_get_irq(to_platform_device(dwc->dev), 0); + + ret = request_irq(irq, dwc3_interrupt, IRQF_SHARED, + "dwc3", dwc); + if (ret) { + dev_err(dwc->dev, "failed to request irq #%d --> %d\n", + irq, ret); + goto err4; + } + + /* Enable all but Start and End of Frame IRQs */ + reg = (DWC3_DEVTEN_VNDRDEVTSTRCVEDEN | + DWC3_DEVTEN_EVNTOVERFLOWEN | + DWC3_DEVTEN_CMDCMPLTEN | + DWC3_DEVTEN_ERRTICERREN | + DWC3_DEVTEN_WKUPEVTEN | + DWC3_DEVTEN_ULSTCNGEN | + DWC3_DEVTEN_CONNECTDONEEN | + DWC3_DEVTEN_USBRSTEN | + DWC3_DEVTEN_DISCONNEVTEN); + dwc3_writel(dwc->regs, DWC3_DEVTEN, reg); + + ret = device_register(&dwc->gadget.dev); + if (ret) { + dev_err(dwc->dev, "failed to register gadget device\n"); + put_device(&dwc->gadget.dev); + goto err5; + } + + ret = usb_add_gadget_udc(dwc->dev, &dwc->gadget); + if (ret) { + dev_err(dwc->dev, "failed to register udc\n"); + goto err6; + } + + return 0; + +err6: + device_unregister(&dwc->gadget.dev); + +err5: + dwc3_writel(dwc->regs, DWC3_DEVTEN, 0x00); + free_irq(irq, dwc); + +err4: + dwc3_gadget_free_endpoints(dwc); + +err3: + dma_free_coherent(dwc->dev, sizeof(*dwc->setup_buf) * 2, + dwc->setup_buf, dwc->setup_buf_addr); + +err2: + dma_free_coherent(dwc->dev, sizeof(*dwc->ep0_trb), + dwc->ep0_trb, dwc->ep0_trb_addr); + +err1: + dma_free_coherent(dwc->dev, sizeof(*dwc->ctrl_req), + dwc->ctrl_req, dwc->ctrl_req_addr); + +err0: + return ret; +} + +void dwc3_gadget_exit(struct dwc3 *dwc) +{ + int irq; + int i; + + usb_del_gadget_udc(&dwc->gadget); + irq = platform_get_irq(to_platform_device(dwc->dev), 0); + + dwc3_writel(dwc->regs, DWC3_DEVTEN, 0x00); + free_irq(irq, dwc); + + for (i = 0; i < ARRAY_SIZE(dwc->eps); i++) + __dwc3_gadget_ep_disable(dwc->eps[i]); + + dwc3_gadget_free_endpoints(dwc); + + dma_free_coherent(dwc->dev, sizeof(*dwc->setup_buf) * 2, + dwc->setup_buf, dwc->setup_buf_addr); + + dma_free_coherent(dwc->dev, sizeof(*dwc->ep0_trb), + dwc->ep0_trb, dwc->ep0_trb_addr); + + dma_free_coherent(dwc->dev, sizeof(*dwc->ctrl_req), + dwc->ctrl_req, dwc->ctrl_req_addr); + + device_unregister(&dwc->gadget.dev); +} diff --git a/drivers/usb/dwc3/gadget.h b/drivers/usb/dwc3/gadget.h new file mode 100644 index 0000000..ccfc109 --- /dev/null +++ b/drivers/usb/dwc3/gadget.h @@ -0,0 +1,292 @@ +/** + * gadget.h - DesignWare USB3 DRD Gadget Header + * + * Copyright (C) 2010-2011 Texas Instruments Incorporated - http://www.ti.com + * All rights reserved. + * + * Authors: Felipe Balbi , + * Sebastian Andrzej Siewior + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions, and the following disclaimer, + * without modification. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. The names of the above-listed copyright holders may not be used + * to endorse or promote products derived from this software without + * specific prior written permission. + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") version 2, as published by the Free + * Software Foundation. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS + * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, + * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR + * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR + * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, + * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, + * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR + * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF + * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING + * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#ifndef __DRIVERS_USB_DWC3_GADGET_H +#define __DRIVERS_USB_DWC3_GADGET_H + +#include +#include +#include "io.h" + +struct dwc3; +#define to_dwc3_ep(ep) (container_of(ep, struct dwc3_ep, endpoint)) +#define gadget_to_dwc(g) (container_of(g, struct dwc3, gadget)) + +/** + * struct dwc3_gadget_ep_depcfg_param1 - DEPCMDPAR0 for DEPCFG command + * @interrupt_number: self-explanatory + * @reserved7_5: set to zero + * @xfer_complete_enable: event generated when transfer completed + * @xfer_in_progress_enable: event generated when transfer in progress + * @xfer_not_ready_enable: event generated when transfer not read + * @fifo_error_enable: generates events when FIFO Underrun (IN eps) + * or FIFO Overrun (OUT) eps + * @reserved_12: set to zero + * @stream_event_enable: event generated on stream + * @reserved14_15: set to zero + * @binterval_m1: bInterval minus 1 + * @stream_capable: this EP is capable of handling streams + * @ep_number: self-explanatory + * @bulk_based: Set to ‘1’ if this isochronous endpoint represents a bulk + * data stream that ignores the relationship of bus time to the + * intervals programmed in TRBs. + * @fifo_based: Set to ‘1’ if this isochronous endpoint represents a + * FIFO-based data stream where TRBs have fixed values and are never + * written back by the core. + */ +struct dwc3_gadget_ep_depcfg_param1 { + u32 interrupt_number:5; + u32 reserved7_5:3; /* set to zero */ + u32 xfer_complete_enable:1; + u32 xfer_in_progress_enable:1; + u32 xfer_not_ready_enable:1; + u32 fifo_error_enable:1; /* IN-underrun, OUT-overrun */ + u32 reserved12:1; /* set to zero */ + u32 stream_event_enable:1; + u32 reserved14_15:2; + u32 binterval_m1:8; /* bInterval minus 1 */ + u32 stream_capable:1; + u32 ep_number:5; + u32 bulk_based:1; + u32 fifo_based:1; +} __packed; + +/** + * struct dwc3_gadget_ep_depcfg_param0 - Parameter 0 for DEPCFG + * @reserved0: set to zero + * @ep_type: Endpoint Type (control, bulk, iso, interrupt) + * @max_packet_size: max packet size in bytes + * @reserved16_14: set to zero + * @fifo_number: self-explanatory + * @burst_size: burst size minus 1 + * @data_sequence_number: Must be 0 when an endpoint is initially configured + * May be non-zero when an endpoint is configured after a power transition + * that requires a save/restore. + * @ignore_sequence_number: Set to ‘1’ to avoid resetting the sequence + * number. This setting is used by software to modify the DEPEVTEN + * event enable bits without modifying other endpoint settings. + */ +struct dwc3_gadget_ep_depcfg_param0 { + u32 reserved0:1; + u32 ep_type:2; + u32 max_packet_size:11; + u32 reserved16_14:3; + u32 fifo_number:5; + u32 burst_size:4; + u32 data_sequence_number:5; + u32 ignore_sequence_number:1; +} __packed; + +/** + * struct dwc3_gadget_ep_depxfercfg_param0 - Parameter 0 of DEPXFERCFG + * @number_xfer_resources: Defines the number of Transfer Resources allocated + * to this endpoint. This field must be set to 1. + * @reserved16_31: set to zero; + */ +struct dwc3_gadget_ep_depxfercfg_param0 { + u32 number_xfer_resources:16; + u32 reserved16_31:16; +} __packed; + +/** + * struct dwc3_gadget_ep_depstrtxfer_param1 - Parameter 1 of DEPSTRTXFER + * @transfer_desc_addr_low: Indicates the lower 32 bits of the external + * memory's start address for the transfer descriptor. Because TRBs + * must be aligned to a 16-byte boundary, the lower 4 bits of this + * address must be 0. + */ +struct dwc3_gadget_ep_depstrtxfer_param1 { + u32 transfer_desc_addr_low; +} __packed; + +/** + * struct dwc3_gadget_ep_depstrtxfer_param1 - Parameter 1 of DEPSTRTXFER + * @transfer_desc_addr_high: Indicates the higher 32 bits of the external + * memory’s start address for the transfer descriptor. + */ +struct dwc3_gadget_ep_depstrtxfer_param0 { + u32 transfer_desc_addr_high; +} __packed; + +struct dwc3_gadget_ep_cmd_params { + union { + u32 raw; + } param2; + + union { + u32 raw; + struct dwc3_gadget_ep_depcfg_param1 depcfg; + struct dwc3_gadget_ep_depstrtxfer_param1 depstrtxfer; + } param1; + + union { + u32 raw; + struct dwc3_gadget_ep_depcfg_param0 depcfg; + struct dwc3_gadget_ep_depxfercfg_param0 depxfercfg; + struct dwc3_gadget_ep_depstrtxfer_param0 depstrtxfer; + } param0; +} __packed; + +/* -------------------------------------------------------------------------- */ + +struct dwc3_request { + struct usb_request request; + struct list_head list; + struct dwc3_ep *dep; + + u8 epnum; + struct dwc3_trb_hw *trb; + dma_addr_t trb_dma; + + unsigned direction:1; + unsigned mapped:1; + unsigned queued:1; +}; +#define to_dwc3_request(r) (container_of(r, struct dwc3_request, request)) + +static inline struct dwc3_request *next_request(struct list_head *list) +{ + if (list_empty(list)) + return NULL; + + return list_first_entry(list, struct dwc3_request, list); +} + +static inline void dwc3_gadget_move_request_queued(struct dwc3_request *req) +{ + struct dwc3_ep *dep = req->dep; + + req->queued = true; + list_move_tail(&req->list, &dep->req_queued); +} + +#if defined(CONFIG_USB_GADGET_DWC3) || defined(CONFIG_USB_GADGET_DWC3_MODULE) +int dwc3_gadget_init(struct dwc3 *dwc); +void dwc3_gadget_exit(struct dwc3 *dwc); +#else +static inline int dwc3_gadget_init(struct dwc3 *dwc) { return 0; } +static inline void dwc3_gadget_exit(struct dwc3 *dwc) { } +#endif + +void dwc3_gadget_giveback(struct dwc3_ep *dep, struct dwc3_request *req, + int status); + +void dwc3_ep0_interrupt(struct dwc3 *dwc, const struct dwc3_event_depevt *event); +void dwc3_ep0_out_start(struct dwc3 *dwc); +int dwc3_gadget_ep0_queue(struct usb_ep *ep, struct usb_request *request, + gfp_t gfp_flags); +int __dwc3_gadget_ep_set_halt(struct dwc3_ep *dep, int value); +int dwc3_send_gadget_ep_cmd(struct dwc3 *dwc, unsigned ep, + unsigned cmd, struct dwc3_gadget_ep_cmd_params *params); +void dwc3_map_buffer_to_dma(struct dwc3_request *req); +void dwc3_unmap_buffer_from_dma(struct dwc3_request *req); + +/** + * dwc3_gadget_ep_get_transfer_index - Gets transfer index from HW + * @dwc: DesignWare USB3 Pointer + * @number: DWC endpoint number + * + * Caller should take care of locking + */ +static inline u32 dwc3_gadget_ep_get_transfer_index(struct dwc3 *dwc, u8 number) +{ + u32 res_id; + + res_id = dwc3_readl(dwc->regs, DWC3_DEPCMD(number)); + + return DWC3_DEPCMD_GET_RSC_IDX(res_id); +} + +/** + * dwc3_gadget_event_string - returns event name + * @event: the event code + */ +static inline const char *dwc3_gadget_event_string(u8 event) +{ + switch (event) { + case DWC3_DEVICE_EVENT_DISCONNECT: + return "Disconnect"; + case DWC3_DEVICE_EVENT_RESET: + return "Reset"; + case DWC3_DEVICE_EVENT_CONNECT_DONE: + return "Connection Done"; + case DWC3_DEVICE_EVENT_LINK_STATUS_CHANGE: + return "Link Status Change"; + case DWC3_DEVICE_EVENT_WAKEUP: + return "WakeUp"; + case DWC3_DEVICE_EVENT_EOPF: + return "End-Of-Frame"; + case DWC3_DEVICE_EVENT_SOF: + return "Start-Of-Frame"; + case DWC3_DEVICE_EVENT_ERRATIC_ERROR: + return "Erratic Error"; + case DWC3_DEVICE_EVENT_CMD_CMPL: + return "Command Complete"; + case DWC3_DEVICE_EVENT_OVERFLOW: + return "Overflow"; + } + + return "UNKNOWN"; +} + +/** + * dwc3_ep_event_string - returns event name + * @event: then event code + */ +static inline const char *dwc3_ep_event_string(u8 event) +{ + switch (event) { + case DWC3_DEPEVT_XFERCOMPLETE: + return "Transfer Complete"; + case DWC3_DEPEVT_XFERINPROGRESS: + return "Transfer In-Progress"; + case DWC3_DEPEVT_XFERNOTREADY: + return "Transfer Not Ready"; + case DWC3_DEPEVT_RXTXFIFOEVT: + return "FIFO"; + case DWC3_DEPEVT_STREAMEVT: + return "Stream"; + case DWC3_DEPEVT_EPCMDCMPLT: + return "Endpoint Command Complete"; + } + + return "UNKNOWN"; +} + +#endif /* __DRIVERS_USB_DWC3_GADGET_H */ diff --git a/drivers/usb/dwc3/io.h b/drivers/usb/dwc3/io.h new file mode 100644 index 0000000..0c4e2a9 --- /dev/null +++ b/drivers/usb/dwc3/io.h @@ -0,0 +1,55 @@ +/** + * io.h - DesignWare USB3 DRD IO Header + * + * Copyright (C) 2010-2011 Texas Instruments Incorporated - http://www.ti.com + * All rights reserved. + * + * Authors: Felipe Balbi , + * Sebastian Andrzej Siewior + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions, and the following disclaimer, + * without modification. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. The names of the above-listed copyright holders may not be used + * to endorse or promote products derived from this software without + * specific prior written permission. + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") version 2, as published by the Free + * Software Foundation. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS + * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, + * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR + * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR + * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, + * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, + * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR + * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF + * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING + * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#ifndef __DRIVERS_USB_DWC3_IO_H +#define __DRIVERS_USB_DWC3_IO_H + +#include + +static inline u32 dwc3_readl(void __iomem *base, u32 offset) +{ + return readl(base + offset); +} + +static inline void dwc3_writel(void __iomem *base, u32 offset, u32 value) +{ + writel(value, base + offset); +} + +#endif /* __DRIVERS_USB_DWC3_IO_H */ diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig index 5a084b9..bb799d5 100644 --- a/drivers/usb/gadget/Kconfig +++ b/drivers/usb/gadget/Kconfig @@ -303,6 +303,18 @@ config USB_PXA_U2O PXA9xx Processor series include a high speed USB2.0 device controller, which support high speed and full speed USB peripheral. +config USB_GADGET_DWC3 + tristate "DesignWare USB3.0 (DRD) Controller" + depends on USB_DWC3 + select USB_GADGET_DUALSPEED + select USB_GADGET_SUPERSPEED + help + DesignWare USB3.0 controller is a SuperSpeed USB3.0 Controller + which can be configured for peripheral-only, host-only, hub-only + and Dual-Role operation. This Controller was first integrated into + the OMAP5 series of processors. More information about the OMAP5 + version of this controller, refer to http://www.ti.com/omap5. + # # Controllers available in both integrated and discrete versions # -- cgit v0.10.2 From 94ab23dd254a1050870160bf9620cd115cb75028 Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Fri, 19 Aug 2011 18:10:59 +0300 Subject: MAINTAINERS: add a maintainer for DesignWare USB3 driver I'll be focussed on this driver and can maintain it without any problem. Signed-off-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman diff --git a/MAINTAINERS b/MAINTAINERS index 069ee3b..18a36f0 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -2139,6 +2139,14 @@ M: Matthew Garrett S: Maintained F: drivers/platform/x86/dell-wmi.c +DESIGNWARE USB3 DRD IP DRIVER +M: Felipe Balbi +L: linux-usb@vger.kernel.org +L: linux-omap@vger.kernel.org +T: git git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb.git +S: Maintained +F: drivers/usb/dwc3/ + DEVICE NUMBER REGISTRY M: Torben Mathiasen W: http://lanana.org/docs/device-list/index.html -- cgit v0.10.2 From da4fc14c9955bbcafb9cdcc34f9772f3e9481bb8 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Heiko=20St=C3=BCbner?= Date: Sun, 21 Aug 2011 14:31:17 +0200 Subject: s3c-hsudc: Fix possible nullpointer dereference during probe The usb-interrupt is requested before the endpoints are initalised. If an interrupt happens in the time between request_irq and the init of the endpoint-data (as seen on the Qisda ESx00 ebook-platforms), it is therefore possible for the interrupt handler to access endpoint- data before its creation resulting in a null-pointer dereference. This patch simply moves the irq request below the endpoint init. Signed-off-by: Heiko Stuebner Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/gadget/s3c-hsudc.c b/drivers/usb/gadget/s3c-hsudc.c index 3fa717c..00056c2 100644 --- a/drivers/usb/gadget/s3c-hsudc.c +++ b/drivers/usb/gadget/s3c-hsudc.c @@ -1269,19 +1269,6 @@ static int s3c_hsudc_probe(struct platform_device *pdev) goto err_remap; } - ret = platform_get_irq(pdev, 0); - if (ret < 0) { - dev_err(dev, "unable to obtain IRQ number\n"); - goto err_irq; - } - hsudc->irq = ret; - - ret = request_irq(hsudc->irq, s3c_hsudc_irq, 0, driver_name, hsudc); - if (ret < 0) { - dev_err(dev, "irq request failed\n"); - goto err_irq; - } - spin_lock_init(&hsudc->lock); device_initialize(&hsudc->gadget.dev); @@ -1299,6 +1286,19 @@ static int s3c_hsudc_probe(struct platform_device *pdev) s3c_hsudc_setup_ep(hsudc); + ret = platform_get_irq(pdev, 0); + if (ret < 0) { + dev_err(dev, "unable to obtain IRQ number\n"); + goto err_irq; + } + hsudc->irq = ret; + + ret = request_irq(hsudc->irq, s3c_hsudc_irq, 0, driver_name, hsudc); + if (ret < 0) { + dev_err(dev, "irq request failed\n"); + goto err_irq; + } + hsudc->uclk = clk_get(&pdev->dev, "usb-device"); if (IS_ERR(hsudc->uclk)) { dev_err(dev, "failed to find usb-device clock source\n"); -- cgit v0.10.2 From 938fbe54f33e97c2911d0665ec613d7f0c967d9a Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Heiko=20St=C3=BCbner?= Date: Sun, 21 Aug 2011 14:32:14 +0200 Subject: s3c-hsudc: Add basic otg transceiver handling Makes it possible to use i.e. gpio-vbus to handle vbus events. Signed-off-by: Heiko Stuebner Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/gadget/s3c-hsudc.c b/drivers/usb/gadget/s3c-hsudc.c index 00056c2..3e96cc5 100644 --- a/drivers/usb/gadget/s3c-hsudc.c +++ b/drivers/usb/gadget/s3c-hsudc.c @@ -26,6 +26,7 @@ #include #include #include +#include #include #include @@ -137,6 +138,7 @@ struct s3c_hsudc { struct usb_gadget_driver *driver; struct device *dev; struct s3c24xx_hsudc_platdata *pd; + struct otg_transceiver *transceiver; spinlock_t lock; void __iomem *regs; struct resource *mem_rsrc; @@ -1171,6 +1173,22 @@ static int s3c_hsudc_start(struct usb_gadget_driver *driver, return ret; } + /* connect to bus through transceiver */ + if (hsudc->transceiver) { + ret = otg_set_peripheral(hsudc->transceiver, &hsudc->gadget); + if (ret) { + dev_err(hsudc->dev, "%s: can't bind to transceiver\n", + hsudc->gadget.name); + driver->unbind(&hsudc->gadget); + + device_del(&hsudc->gadget.dev); + + hsudc->driver = NULL; + hsudc->gadget.dev.driver = NULL; + return ret; + } + } + enable_irq(hsudc->irq); dev_info(hsudc->dev, "bound driver %s\n", driver->driver.name); @@ -1201,6 +1219,9 @@ static int s3c_hsudc_stop(struct usb_gadget_driver *driver) s3c_hsudc_stop_activity(hsudc, driver); spin_unlock_irqrestore(&hsudc->lock, flags); + if (hsudc->transceiver) + (void) otg_set_peripheral(hsudc->transceiver, NULL); + driver->unbind(&hsudc->gadget); device_del(&hsudc->gadget.dev); disable_irq(hsudc->irq); @@ -1247,6 +1268,8 @@ static int s3c_hsudc_probe(struct platform_device *pdev) hsudc->dev = dev; hsudc->pd = pdev->dev.platform_data; + hsudc->transceiver = otg_get_transceiver(); + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); if (!res) { dev_err(dev, "unable to obtain driver resource data\n"); -- cgit v0.10.2 From e18a99e28fe308f0028be8644418a1ac653a2a96 Mon Sep 17 00:00:00 2001 From: Wanlong Gao Date: Sun, 21 Aug 2011 21:45:53 +0800 Subject: USB: otg: remove unused function twl6030_set_phy_clk Remove the unused function twl6030_set_phy_clk of twl6030-usb.c. Signed-off-by: Wanlong Gao Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/otg/twl6030-usb.c b/drivers/usb/otg/twl6030-usb.c index b4d2c09..ed2b26c 100644 --- a/drivers/usb/otg/twl6030-usb.c +++ b/drivers/usb/otg/twl6030-usb.c @@ -137,22 +137,6 @@ static inline u8 twl6030_readb(struct twl6030_usb *twl, u8 module, u8 address) return ret; } -/*-------------------------------------------------------------------------*/ -static int twl6030_set_phy_clk(struct otg_transceiver *x, int on) -{ - struct twl6030_usb *twl; - struct device *dev; - struct twl4030_usb_data *pdata; - - twl = xceiv_to_twl(x); - dev = twl->dev; - pdata = dev->platform_data; - - pdata->phy_set_clock(twl->dev, on); - - return 0; -} - static int twl6030_phy_init(struct otg_transceiver *x) { struct twl6030_usb *twl; -- cgit v0.10.2 From d80cba6c53621ecdd768035f2988dc99addf12c2 Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Mon, 22 Aug 2011 16:00:35 +0200 Subject: drivers/usb/host/ohci-omap3.c: test the just-initialized value Test the just-initialized value rather than some other one. The semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // @r@ identifier x,y,f!={PTR_ERR,ERR_PTR,ERR_CAST}; statement S; @@ x = f(...); ( if (\(x == NULL\|IS_ERR(x)\)) S | *if (\(y == NULL\|IS_ERR(y)\)) { ... when != x return ...; } ) // Signed-off-by: Julia Lawall Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/host/ohci-omap3.c b/drivers/usb/host/ohci-omap3.c index 6048f2f..853ad8d 100644 --- a/drivers/usb/host/ohci-omap3.c +++ b/drivers/usb/host/ohci-omap3.c @@ -149,7 +149,7 @@ static int __devinit ohci_hcd_omap3_probe(struct platform_device *pdev) res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "ohci"); - if (!ret) { + if (!res) { dev_err(dev, "UHH OHCI get resource failed\n"); return -ENOMEM; } -- cgit v0.10.2 From 74ad60292bf0108de9884c531d7ec3f65c206230 Mon Sep 17 00:00:00 2001 From: Arvid Brodin Date: Tue, 23 Aug 2011 01:25:30 +0200 Subject: usb/isp1760: Clear TT buffer on interrupted low & full speed transfers When a low or full speed urb in progress is unlinked (or some other error occurs), the buffer in the transaction translator (part of the hub) might end up in an inconsistent state. This can make all further low and full speed transactions fail, unless the buffer is cleared. The bug can be seen when running the usbtest unlink tests as "set altsetting to 0 failed, -110", and gets fixed by this patch. Signed-off-by: Arvid Brodin Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/host/isp1760-hcd.c b/drivers/usb/host/isp1760-hcd.c index 11367b4..5b08bd7 100644 --- a/drivers/usb/host/isp1760-hcd.c +++ b/drivers/usb/host/isp1760-hcd.c @@ -114,6 +114,7 @@ struct isp1760_qh { u32 toggle; u32 ping; int slot; + int tt_buffer_dirty; /* See USB2.0 spec section 11.17.5 */ }; struct urb_listitem { @@ -845,6 +846,10 @@ static void enqueue_qtds(struct usb_hcd *hcd, struct isp1760_qh *qh) return; } + /* Make sure this endpoint's TT buffer is clean before queueing ptds */ + if (qh->tt_buffer_dirty) + return; + if (usb_pipeint(list_entry(qh->qtd_list.next, struct isp1760_qtd, qtd_list)->urb->pipe)) { ptd_offset = INT_PTD_OFFSET; @@ -1182,6 +1187,15 @@ static void handle_done_ptds(struct usb_hcd *hcd) case PTD_STATE_URB_RETIRE: qtd->status = QTD_RETIRE; + if ((qtd->urb->dev->speed != USB_SPEED_HIGH) && + (qtd->urb->status != -EPIPE) && + (qtd->urb->status != -EREMOTEIO)) { + qh->tt_buffer_dirty = 1; + if (usb_hub_clear_tt_buffer(qtd->urb)) + /* Clear failed; let's hope things work + anyway */ + qh->tt_buffer_dirty = 0; + } qtd = NULL; qh->toggle = 0; qh->ping = 0; @@ -1611,6 +1625,41 @@ static void kill_transfer(struct usb_hcd *hcd, struct urb *urb, qh->slot = -1; } +/* + * Retire the qtds beginning at 'qtd' and belonging all to the same urb, killing + * any active transfer belonging to the urb in the process. + */ +static void dequeue_urb_from_qtd(struct usb_hcd *hcd, struct isp1760_qh *qh, + struct isp1760_qtd *qtd) +{ + struct urb *urb; + int urb_was_running; + + urb = qtd->urb; + urb_was_running = 0; + list_for_each_entry_from(qtd, &qh->qtd_list, qtd_list) { + if (qtd->urb != urb) + break; + + if (qtd->status >= QTD_XFER_STARTED) + urb_was_running = 1; + if (last_qtd_of_urb(qtd, qh) && + (qtd->status >= QTD_XFER_COMPLETE)) + urb_was_running = 0; + + if (qtd->status == QTD_XFER_STARTED) + kill_transfer(hcd, urb, qh); + qtd->status = QTD_RETIRE; + } + + if ((urb->dev->speed != USB_SPEED_HIGH) && urb_was_running) { + qh->tt_buffer_dirty = 1; + if (usb_hub_clear_tt_buffer(urb)) + /* Clear failed; let's hope things work anyway */ + qh->tt_buffer_dirty = 0; + } +} + static int isp1760_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status) { @@ -1633,9 +1682,8 @@ static int isp1760_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, list_for_each_entry(qtd, &qh->qtd_list, qtd_list) if (qtd->urb == urb) { - if (qtd->status == QTD_XFER_STARTED) - kill_transfer(hcd, urb, qh); - qtd->status = QTD_RETIRE; + dequeue_urb_from_qtd(hcd, qh, qtd); + break; } urb->status = status; @@ -1660,12 +1708,11 @@ static void isp1760_endpoint_disable(struct usb_hcd *hcd, if (!qh) goto out; - list_for_each_entry(qtd, &qh->qtd_list, qtd_list) { - if (qtd->status == QTD_XFER_STARTED) - kill_transfer(hcd, qtd->urb, qh); - qtd->status = QTD_RETIRE; - qtd->urb->status = -ECONNRESET; - } + list_for_each_entry(qtd, &qh->qtd_list, qtd_list) + if (qtd->status != QTD_RETIRE) { + dequeue_urb_from_qtd(hcd, qh, qtd); + qtd->urb->status = -ECONNRESET; + } ep->hcpriv = NULL; /* Cannot free qh here since it will be parsed by schedule_ptds() */ @@ -2088,6 +2135,23 @@ static void isp1760_shutdown(struct usb_hcd *hcd) reg_write32(hcd->regs, HC_USBCMD, command); } +static void isp1760_clear_tt_buffer_complete(struct usb_hcd *hcd, + struct usb_host_endpoint *ep) +{ + struct isp1760_hcd *priv = hcd_to_priv(hcd); + struct isp1760_qh *qh = ep->hcpriv; + unsigned long spinflags; + + if (!qh) + return; + + spin_lock_irqsave(&priv->lock, spinflags); + qh->tt_buffer_dirty = 0; + schedule_ptds(hcd); + spin_unlock_irqrestore(&priv->lock, spinflags); +} + + static const struct hc_driver isp1760_hc_driver = { .description = "isp1760-hcd", .product_desc = "NXP ISP1760 USB Host Controller", @@ -2104,6 +2168,7 @@ static const struct hc_driver isp1760_hc_driver = { .get_frame_number = isp1760_get_frame, .hub_status_data = isp1760_hub_status_data, .hub_control = isp1760_hub_control, + .clear_tt_buffer_complete = isp1760_clear_tt_buffer_complete, }; int __init init_kmem_once(void) -- cgit v0.10.2 From 39eb4ed556c145f35059c59144192d8ee32ceaa5 Mon Sep 17 00:00:00 2001 From: Joakim Tjernlund Date: Tue, 23 Aug 2011 15:23:46 +0200 Subject: usb: fhci-hcd: Allocate pram dynamically. MPC832x does not have enough MURAM to do fixed MURAM allocation. Change to dynamic allocation. Signed-off-by: Joakim Tjernlund Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/host/fhci-hcd.c b/drivers/usb/host/fhci-hcd.c index 572ea53..484a74f 100644 --- a/drivers/usb/host/fhci-hcd.c +++ b/drivers/usb/host/fhci-hcd.c @@ -621,12 +621,15 @@ static int __devinit of_fhci_probe(struct platform_device *ofdev) goto err_pram; } - pram_addr = cpm_muram_alloc_fixed(iprop[2], FHCI_PRAM_SIZE); + pram_addr = cpm_muram_alloc(FHCI_PRAM_SIZE, 64); if (IS_ERR_VALUE(pram_addr)) { dev_err(dev, "failed to allocate usb pram\n"); ret = -ENOMEM; goto err_pram; } + + qe_issue_cmd(QE_ASSIGN_PAGE_TO_DEVICE, QE_CR_SUBBLOCK_USB, + QE_CR_PROTOCOL_UNSPECIFIED, pram_addr); fhci->pram = cpm_muram_addr(pram_addr); /* GPIOs and pins */ -- cgit v0.10.2 From 7c79d094358326132693279bfb22e4f8454cc652 Mon Sep 17 00:00:00 2001 From: Sebastian Andrzej Siewior Date: Tue, 23 Aug 2011 10:44:54 +0200 Subject: USB: usbtest: use URB_ZERO_PACKET for BULK-OUT transfers Executing | testusb -a -c 1 -t 3 -v 421 -s 2048 does not complete on the gadget side. g_zero enqueues a 4096 bytes long buffer. The host sends 2048bytes which is a multiple of wMaxPacketSize (either 64 or 512 bytes). The host is done with sending data but the gadget waits for more. Since the protocol does not include transfer-length-field sending a terminating zero packet seems the only way out. Reviewed-by: Felipe Balbi Signed-off-by: Sebastian Andrzej Siewior Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/misc/usbtest.c b/drivers/usb/misc/usbtest.c index bb10846..bd71500 100644 --- a/drivers/usb/misc/usbtest.c +++ b/drivers/usb/misc/usbtest.c @@ -359,8 +359,10 @@ static int simple_io( urb->context = &completion; while (retval == 0 && iterations-- > 0) { init_completion(&completion); - if (usb_pipeout(urb->pipe)) + if (usb_pipeout(urb->pipe)) { simple_fill_buf(urb); + urb->transfer_flags |= URB_ZERO_PACKET; + } retval = usb_submit_urb(urb, GFP_KERNEL); if (retval != 0) break; -- cgit v0.10.2 From 46a57283e86c68351377ac3349f1465aee938fbd Mon Sep 17 00:00:00 2001 From: Stephen Rothwell Date: Tue, 23 Aug 2011 15:08:54 +1000 Subject: usb: include module.h in the DesignWare USB3 DRD driver Fixes this build error: drivers/usb/dwc3/dwc3-pci.c: In function 'dwc3_pci_init': drivers/usb/dwc3/dwc3-pci.c:211:9: error: 'THIS_MODULE' undeclared (first use in this function) Signed-off-by: Stephen Rothwell Acked-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/dwc3/dwc3-pci.c b/drivers/usb/dwc3/dwc3-pci.c index 2578595..e3b77d2 100644 --- a/drivers/usb/dwc3/dwc3-pci.c +++ b/drivers/usb/dwc3/dwc3-pci.c @@ -38,6 +38,7 @@ */ #include +#include #include #include #include -- cgit v0.10.2 From 29cc88979a8818cd8c5019426e945aed118b400e Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Tue, 23 Aug 2011 03:12:03 -0700 Subject: USB: use usb_endpoint_maxp() instead of le16_to_cpu() MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Now ${LINUX}/drivers/usb/* can use usb_endpoint_maxp(desc) to get maximum packet size instead of le16_to_cpu(desc->wMaxPacketSize). This patch fix it up Cc: Armin Fuerst Cc: Pavel Machek Cc: Johannes Erdfelt Cc: Vojtech Pavlik Cc: Oliver Neukum Cc: David Kubicek Cc: Johan Hovold Cc: Brad Hards Acked-by: Felipe Balbi Cc: Sebastian Andrzej Siewior Cc: Thomas Dahlmann Cc: David Brownell Cc: David Lopo Cc: Alan Stern Cc: Michal Nazarewicz Cc: Xie Xiaobo Cc: Li Yang Cc: Jiang Bo Cc: Yuan-hsin Chen Cc: Darius Augulis Cc: Xiaochen Shen Cc: Yoshihiro Shimoda Cc: OKI SEMICONDUCTOR, Cc: Robert Jarzmik Cc: Ben Dooks Cc: Thomas Abraham Cc: Herbert Pötzl Cc: Arnaud Patard Cc: Roman Weissgaerber Acked-by: Sarah Sharp Cc: Tony Olech Cc: Florian Floe Echtler Cc: Christian Lucht Cc: Juergen Stuber Cc: Georges Toth Cc: Bill Ryder Cc: Kuba Ober Cc: Inaky Perez-Gonzalez Signed-off-by: Kuninori Morimoto Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c index dac7676..f69a185 100644 --- a/drivers/usb/class/cdc-acm.c +++ b/drivers/usb/class/cdc-acm.c @@ -1058,11 +1058,11 @@ made_compressed_probe: goto alloc_fail; } - ctrlsize = le16_to_cpu(epctrl->wMaxPacketSize); - readsize = le16_to_cpu(epread->wMaxPacketSize) * + ctrlsize = usb_endpoint_maxp(epctrl); + readsize = usb_endpoint_maxp(epread) * (quirks == SINGLE_RX_URB ? 1 : 2); acm->combined_interfaces = combined_interfaces; - acm->writesize = le16_to_cpu(epwrite->wMaxPacketSize) * 20; + acm->writesize = usb_endpoint_maxp(epwrite) * 20; acm->control = control_interface; acm->data = data_interface; acm->minor = minor; diff --git a/drivers/usb/class/cdc-wdm.c b/drivers/usb/class/cdc-wdm.c index 2b9ff51..1d26a71 100644 --- a/drivers/usb/class/cdc-wdm.c +++ b/drivers/usb/class/cdc-wdm.c @@ -682,7 +682,7 @@ next_desc: if (!ep || !usb_endpoint_is_int_in(ep)) goto err; - desc->wMaxPacketSize = le16_to_cpu(ep->wMaxPacketSize); + desc->wMaxPacketSize = usb_endpoint_maxp(ep); desc->bMaxPacketSize0 = udev->descriptor.bMaxPacketSize0; desc->orq = kmalloc(sizeof(struct usb_ctrlrequest), GFP_KERNEL); diff --git a/drivers/usb/class/usbtmc.c b/drivers/usb/class/usbtmc.c index 3f94ac3..12cf5e7 100644 --- a/drivers/usb/class/usbtmc.c +++ b/drivers/usb/class/usbtmc.c @@ -186,8 +186,7 @@ static int usbtmc_ioctl_abort_bulk_in(struct usbtmc_device_data *data) for (n = 0; n < current_setting->desc.bNumEndpoints; n++) if (current_setting->endpoint[n].desc.bEndpointAddress == data->bulk_in) - max_size = le16_to_cpu(current_setting->endpoint[n]. - desc.wMaxPacketSize); + max_size = usb_endpoint_maxp(¤t_setting->endpoint[n].desc); if (max_size == 0) { dev_err(dev, "Couldn't get wMaxPacketSize\n"); @@ -636,7 +635,7 @@ static int usbtmc_ioctl_clear(struct usbtmc_device_data *data) for (n = 0; n < current_setting->desc.bNumEndpoints; n++) { desc = ¤t_setting->endpoint[n].desc; if (desc->bEndpointAddress == data->bulk_in) - max_size = le16_to_cpu(desc->wMaxPacketSize); + max_size = usb_endpoint_maxp(desc); } if (max_size == 0) { diff --git a/drivers/usb/core/config.c b/drivers/usb/core/config.c index 26678ca..9d5e07a 100644 --- a/drivers/usb/core/config.c +++ b/drivers/usb/core/config.c @@ -124,9 +124,9 @@ static void usb_parse_ss_endpoint_companion(struct device *ddev, int cfgno, if (usb_endpoint_xfer_isoc(&ep->desc)) max_tx = (desc->bMaxBurst + 1) * (desc->bmAttributes + 1) * - le16_to_cpu(ep->desc.wMaxPacketSize); + usb_endpoint_maxp(&ep->desc); else if (usb_endpoint_xfer_int(&ep->desc)) - max_tx = le16_to_cpu(ep->desc.wMaxPacketSize) * + max_tx = usb_endpoint_maxp(&ep->desc) * (desc->bMaxBurst + 1); else max_tx = 999999; @@ -241,7 +241,7 @@ static int usb_parse_endpoint(struct device *ddev, int cfgno, int inum, cfgno, inum, asnum, d->bEndpointAddress); endpoint->desc.bmAttributes = USB_ENDPOINT_XFER_INT; endpoint->desc.bInterval = 1; - if (le16_to_cpu(endpoint->desc.wMaxPacketSize) > 8) + if (usb_endpoint_maxp(&endpoint->desc) > 8) endpoint->desc.wMaxPacketSize = cpu_to_le16(8); } @@ -254,7 +254,7 @@ static int usb_parse_endpoint(struct device *ddev, int cfgno, int inum, && usb_endpoint_xfer_bulk(d)) { unsigned maxp; - maxp = le16_to_cpu(endpoint->desc.wMaxPacketSize) & 0x07ff; + maxp = usb_endpoint_maxp(&endpoint->desc) & 0x07ff; if (maxp != 512) dev_warn(ddev, "config %d interface %d altsetting %d " "bulk endpoint 0x%X has invalid maxpacket %d\n", diff --git a/drivers/usb/core/devices.c b/drivers/usb/core/devices.c index 0149c09..d956965 100644 --- a/drivers/usb/core/devices.c +++ b/drivers/usb/core/devices.c @@ -190,7 +190,7 @@ static char *usb_dump_endpoint_descriptor(int speed, char *start, char *end, dir = usb_endpoint_dir_in(desc) ? 'I' : 'O'; if (speed == USB_SPEED_HIGH) { - switch (le16_to_cpu(desc->wMaxPacketSize) & (0x03 << 11)) { + switch (usb_endpoint_maxp(desc) & (0x03 << 11)) { case 1 << 11: bandwidth = 2; break; case 2 << 11: @@ -240,7 +240,7 @@ static char *usb_dump_endpoint_descriptor(int speed, char *start, char *end, start += sprintf(start, format_endpt, desc->bEndpointAddress, dir, desc->bmAttributes, type, - (le16_to_cpu(desc->wMaxPacketSize) & 0x07ff) * + (usb_endpoint_maxp(desc) & 0x07ff) * bandwidth, interval, unit); return start; diff --git a/drivers/usb/core/endpoint.c b/drivers/usb/core/endpoint.c index df502a9..db7fe50 100644 --- a/drivers/usb/core/endpoint.c +++ b/drivers/usb/core/endpoint.c @@ -56,7 +56,7 @@ static ssize_t show_ep_wMaxPacketSize(struct device *dev, { struct ep_device *ep = to_ep_device(dev); return sprintf(buf, "%04x\n", - le16_to_cpu(ep->desc->wMaxPacketSize) & 0x07ff); + usb_endpoint_maxp(ep->desc) & 0x07ff); } static DEVICE_ATTR(wMaxPacketSize, S_IRUGO, show_ep_wMaxPacketSize, NULL); diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 99fff6b..338f91f 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -3018,7 +3018,7 @@ hub_port_init (struct usb_hub *hub, struct usb_device *udev, int port1, i = 512; else i = udev->descriptor.bMaxPacketSize0; - if (le16_to_cpu(udev->ep0.desc.wMaxPacketSize) != i) { + if (usb_endpoint_maxp(&udev->ep0.desc) != i) { if (udev->speed == USB_SPEED_LOW || !(i == 8 || i == 16 || i == 32 || i == 64)) { dev_err(&udev->dev, "Invalid ep0 maxpacket: %d\n", i); diff --git a/drivers/usb/core/urb.c b/drivers/usb/core/urb.c index ae334b0..909625b 100644 --- a/drivers/usb/core/urb.c +++ b/drivers/usb/core/urb.c @@ -350,7 +350,7 @@ int usb_submit_urb(struct urb *urb, gfp_t mem_flags) dev->state < USB_STATE_CONFIGURED) return -ENODEV; - max = le16_to_cpu(ep->desc.wMaxPacketSize); + max = usb_endpoint_maxp(&ep->desc); if (max <= 0) { dev_dbg(&dev->dev, "bogus endpoint ep%d%s in %s (bad maxpacket %d)\n", diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c index de5f0af..cebaef7 100644 --- a/drivers/usb/dwc3/gadget.c +++ b/drivers/usb/dwc3/gadget.c @@ -254,8 +254,7 @@ static int dwc3_gadget_set_ep_config(struct dwc3 *dwc, struct dwc3_ep *dep, memset(¶ms, 0x00, sizeof(params)); params.param0.depcfg.ep_type = usb_endpoint_type(desc); - params.param0.depcfg.max_packet_size = - le16_to_cpu(desc->wMaxPacketSize); + params.param0.depcfg.max_packet_size = usb_endpoint_maxp(desc); params.param1.depcfg.xfer_complete_enable = true; params.param1.depcfg.xfer_not_ready_enable = true; diff --git a/drivers/usb/gadget/amd5536udc.c b/drivers/usb/gadget/amd5536udc.c index 70f2b37..d65d839 100644 --- a/drivers/usb/gadget/amd5536udc.c +++ b/drivers/usb/gadget/amd5536udc.c @@ -354,7 +354,7 @@ udc_ep_enable(struct usb_ep *usbep, const struct usb_endpoint_descriptor *desc) writel(tmp, &dev->ep[ep->num].regs->ctl); /* set max packet size */ - maxpacket = le16_to_cpu(desc->wMaxPacketSize); + maxpacket = usb_endpoint_maxp(desc); tmp = readl(&dev->ep[ep->num].regs->bufout_maxpkt); tmp = AMD_ADDBITS(tmp, maxpacket, UDC_EP_MAX_PKT_SIZE); ep->ep.maxpacket = maxpacket; diff --git a/drivers/usb/gadget/at91_udc.c b/drivers/usb/gadget/at91_udc.c index ddb118a..d01fa5b 100644 --- a/drivers/usb/gadget/at91_udc.c +++ b/drivers/usb/gadget/at91_udc.c @@ -487,7 +487,7 @@ static int at91_ep_enable(struct usb_ep *_ep, || !desc || ep->desc || _ep->name == ep0name || desc->bDescriptorType != USB_DT_ENDPOINT - || (maxpacket = le16_to_cpu(desc->wMaxPacketSize)) == 0 + || (maxpacket = usb_endpoint_maxp(desc)) == 0 || maxpacket > ep->maxpacket) { DBG("bad ep or descriptor\n"); return -EINVAL; diff --git a/drivers/usb/gadget/atmel_usba_udc.c b/drivers/usb/gadget/atmel_usba_udc.c index 5b1665e..722c468 100644 --- a/drivers/usb/gadget/atmel_usba_udc.c +++ b/drivers/usb/gadget/atmel_usba_udc.c @@ -527,7 +527,7 @@ usba_ep_enable(struct usb_ep *_ep, const struct usb_endpoint_descriptor *desc) DBG(DBG_GADGET, "%s: ep_enable: desc=%p\n", ep->ep.name, desc); - maxpacket = le16_to_cpu(desc->wMaxPacketSize) & 0x7ff; + maxpacket = usb_endpoint_maxp(desc) & 0x7ff; if (((desc->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK) != ep->index) || ep->index == 0 @@ -571,7 +571,7 @@ usba_ep_enable(struct usb_ep *_ep, const struct usb_endpoint_descriptor *desc) * Bits 11:12 specify number of _additional_ * transactions per microframe. */ - nr_trans = ((le16_to_cpu(desc->wMaxPacketSize) >> 11) & 3) + 1; + nr_trans = ((usb_endpoint_maxp(desc) >> 11) & 3) + 1; if (nr_trans > 3) return -EINVAL; diff --git a/drivers/usb/gadget/ci13xxx_udc.c b/drivers/usb/gadget/ci13xxx_udc.c index 1265a85..83428f5 100644 --- a/drivers/usb/gadget/ci13xxx_udc.c +++ b/drivers/usb/gadget/ci13xxx_udc.c @@ -2101,7 +2101,7 @@ static int ep_enable(struct usb_ep *ep, mEp->num = usb_endpoint_num(desc); mEp->type = usb_endpoint_type(desc); - mEp->ep.maxpacket = __constant_le16_to_cpu(desc->wMaxPacketSize); + mEp->ep.maxpacket = usb_endpoint_maxp(desc); dbg_event(_usb_addr(mEp), "ENABLE", 0); diff --git a/drivers/usb/gadget/composite.c b/drivers/usb/gadget/composite.c index aef4741..8065464 100644 --- a/drivers/usb/gadget/composite.c +++ b/drivers/usb/gadget/composite.c @@ -164,7 +164,7 @@ int config_ep_by_speed(struct usb_gadget *g, ep_found: /* commit results */ - _ep->maxpacket = le16_to_cpu(chosen_desc->wMaxPacketSize); + _ep->maxpacket = usb_endpoint_maxp(chosen_desc); _ep->desc = chosen_desc; _ep->comp_desc = NULL; _ep->maxburst = 0; diff --git a/drivers/usb/gadget/dummy_hcd.c b/drivers/usb/gadget/dummy_hcd.c index e755a9d..7b06d39 100644 --- a/drivers/usb/gadget/dummy_hcd.c +++ b/drivers/usb/gadget/dummy_hcd.c @@ -439,7 +439,7 @@ dummy_enable (struct usb_ep *_ep, const struct usb_endpoint_descriptor *desc) * maximum packet size. * For SS devices the wMaxPacketSize is limited by 1024. */ - max = le16_to_cpu(desc->wMaxPacketSize) & 0x7ff; + max = usb_endpoint_maxp(desc) & 0x7ff; /* drivers must not request bad settings, since lower levels * (hardware or its drivers) may not check. some endpoints @@ -1277,7 +1277,7 @@ static int periodic_bytes (struct dummy *dum, struct dummy_ep *ep) int tmp; /* high bandwidth mode */ - tmp = le16_to_cpu(ep->desc->wMaxPacketSize); + tmp = usb_endpoint_maxp(ep->desc); tmp = (tmp >> 11) & 0x03; tmp *= 8 /* applies to entire frame */; limit += limit * tmp; diff --git a/drivers/usb/gadget/epautoconf.c b/drivers/usb/gadget/epautoconf.c index 7a7e6b7..cdca7eb 100644 --- a/drivers/usb/gadget/epautoconf.c +++ b/drivers/usb/gadget/epautoconf.c @@ -158,7 +158,7 @@ ep_matches ( * where it's an output parameter representing the full speed limit. * the usb spec fixes high speed bulk maxpacket at 512 bytes. */ - max = 0x7ff & le16_to_cpu(desc->wMaxPacketSize); + max = 0x7ff & usb_endpoint_maxp(desc); switch (type) { case USB_ENDPOINT_XFER_INT: /* INT: limit 64 bytes full speed, 1024 high/super speed */ diff --git a/drivers/usb/gadget/f_mass_storage.c b/drivers/usb/gadget/f_mass_storage.c index 5b93395..4ce3dec 100644 --- a/drivers/usb/gadget/f_mass_storage.c +++ b/drivers/usb/gadget/f_mass_storage.c @@ -2401,8 +2401,7 @@ reset: goto reset; fsg->bulk_out->driver_data = common; fsg->bulk_out_enabled = 1; - common->bulk_out_maxpacket = - le16_to_cpu(fsg->bulk_out->desc->wMaxPacketSize); + common->bulk_out_maxpacket = usb_endpoint_maxp(fsg->bulk_out->desc); clear_bit(IGNORE_BULK_OUT, &fsg->atomic_bitflags); /* Allocate the requests */ diff --git a/drivers/usb/gadget/file_storage.c b/drivers/usb/gadget/file_storage.c index 639e14a..39ece40 100644 --- a/drivers/usb/gadget/file_storage.c +++ b/drivers/usb/gadget/file_storage.c @@ -2801,7 +2801,7 @@ reset: if ((rc = enable_endpoint(fsg, fsg->bulk_out, d)) != 0) goto reset; fsg->bulk_out_enabled = 1; - fsg->bulk_out_maxpacket = le16_to_cpu(d->wMaxPacketSize); + fsg->bulk_out_maxpacket = usb_endpoint_maxp(d); clear_bit(IGNORE_BULK_OUT, &fsg->atomic_bitflags); if (transport_is_cbi()) { diff --git a/drivers/usb/gadget/fsl_qe_udc.c b/drivers/usb/gadget/fsl_qe_udc.c index 3bf872e..2a03e4d 100644 --- a/drivers/usb/gadget/fsl_qe_udc.c +++ b/drivers/usb/gadget/fsl_qe_udc.c @@ -540,7 +540,7 @@ static int qe_ep_init(struct qe_udc *udc, int reval = 0; u16 max = 0; - max = le16_to_cpu(desc->wMaxPacketSize); + max = usb_endpoint_maxp(desc); /* check the max package size validate for this endpoint */ /* Refer to USB2.0 spec table 9-13, diff --git a/drivers/usb/gadget/fsl_udc_core.c b/drivers/usb/gadget/fsl_udc_core.c index de24a42..d699350 100644 --- a/drivers/usb/gadget/fsl_udc_core.c +++ b/drivers/usb/gadget/fsl_udc_core.c @@ -559,7 +559,7 @@ static int fsl_ep_enable(struct usb_ep *_ep, if (!udc->driver || (udc->gadget.speed == USB_SPEED_UNKNOWN)) return -ESHUTDOWN; - max = le16_to_cpu(desc->wMaxPacketSize); + max = usb_endpoint_maxp(desc); /* Disable automatic zlp generation. Driver is responsible to indicate * explicitly through req->req.zero. This is needed to enable multi-td diff --git a/drivers/usb/gadget/fusb300_udc.c b/drivers/usb/gadget/fusb300_udc.c index 4ec888f..d9ee6c3 100644 --- a/drivers/usb/gadget/fusb300_udc.c +++ b/drivers/usb/gadget/fusb300_udc.c @@ -220,7 +220,7 @@ static int config_ep(struct fusb300_ep *ep, info.type = desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK; info.dir_in = (desc->bEndpointAddress & USB_ENDPOINT_DIR_MASK) ? 1 : 0; - info.maxpacket = le16_to_cpu(desc->wMaxPacketSize); + info.maxpacket = usb_endpoint_maxp(desc); info.epnum = desc->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK; if ((info.type == USB_ENDPOINT_XFER_INT) || diff --git a/drivers/usb/gadget/imx_udc.c b/drivers/usb/gadget/imx_udc.c index 692fd9b..bf08bfc 100644 --- a/drivers/usb/gadget/imx_udc.c +++ b/drivers/usb/gadget/imx_udc.c @@ -689,7 +689,7 @@ static int imx_ep_enable(struct usb_ep *usb_ep, return -EINVAL; } - if (imx_ep->fifosize < le16_to_cpu(desc->wMaxPacketSize)) { + if (imx_ep->fifosize < usb_endpoint_maxp(desc)) { D_ERR(imx_usb->dev, "<%s> bad %s maxpacket\n", __func__, usb_ep->name); return -ERANGE; diff --git a/drivers/usb/gadget/langwell_udc.c b/drivers/usb/gadget/langwell_udc.c index a06e2c2..5bf9942 100644 --- a/drivers/usb/gadget/langwell_udc.c +++ b/drivers/usb/gadget/langwell_udc.c @@ -283,7 +283,7 @@ static int langwell_ep_enable(struct usb_ep *_ep, if (!dev->driver || dev->gadget.speed == USB_SPEED_UNKNOWN) return -ESHUTDOWN; - max = le16_to_cpu(desc->wMaxPacketSize); + max = usb_endpoint_maxp(desc); /* * disable HW zero length termination select diff --git a/drivers/usb/gadget/m66592-udc.c b/drivers/usb/gadget/m66592-udc.c index 491f825..5e597c3 100644 --- a/drivers/usb/gadget/m66592-udc.c +++ b/drivers/usb/gadget/m66592-udc.c @@ -370,7 +370,7 @@ static void m66592_ep_setting(struct m66592 *m66592, struct m66592_ep *ep, ep->pipectr = get_pipectr_addr(pipenum); ep->pipenum = pipenum; - ep->ep.maxpacket = le16_to_cpu(desc->wMaxPacketSize); + ep->ep.maxpacket = usb_endpoint_maxp(desc); m66592->pipenum2ep[pipenum] = ep; m66592->epaddr2ep[desc->bEndpointAddress&USB_ENDPOINT_NUMBER_MASK] = ep; INIT_LIST_HEAD(&ep->queue); @@ -447,7 +447,7 @@ static int alloc_pipe_config(struct m66592_ep *ep, ep->type = info.type; info.epnum = desc->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK; - info.maxpacket = le16_to_cpu(desc->wMaxPacketSize); + info.maxpacket = usb_endpoint_maxp(desc); info.interval = desc->bInterval; if (desc->bEndpointAddress & USB_ENDPOINT_DIR_MASK) info.dir_in = 1; diff --git a/drivers/usb/gadget/mv_udc_core.c b/drivers/usb/gadget/mv_udc_core.c index ce1ac2b..263dec4 100644 --- a/drivers/usb/gadget/mv_udc_core.c +++ b/drivers/usb/gadget/mv_udc_core.c @@ -493,7 +493,7 @@ static int mv_ep_enable(struct usb_ep *_ep, return -ESHUTDOWN; direction = ep_dir(ep); - max = le16_to_cpu(desc->wMaxPacketSize); + max = usb_endpoint_maxp(desc); /* * disable HW zero length termination select diff --git a/drivers/usb/gadget/net2272.c b/drivers/usb/gadget/net2272.c index ab98ea9..6fef1c0 100644 --- a/drivers/usb/gadget/net2272.c +++ b/drivers/usb/gadget/net2272.c @@ -204,7 +204,7 @@ net2272_enable(struct usb_ep *_ep, const struct usb_endpoint_descriptor *desc) if (!dev->driver || dev->gadget.speed == USB_SPEED_UNKNOWN) return -ESHUTDOWN; - max = le16_to_cpu(desc->wMaxPacketSize) & 0x1fff; + max = usb_endpoint_maxp(desc) & 0x1fff; spin_lock_irqsave(&dev->lock, flags); _ep->maxpacket = max & 0x7fff; diff --git a/drivers/usb/gadget/net2280.c b/drivers/usb/gadget/net2280.c index 3dd40b4..8d3673f 100644 --- a/drivers/usb/gadget/net2280.c +++ b/drivers/usb/gadget/net2280.c @@ -169,7 +169,7 @@ net2280_enable (struct usb_ep *_ep, const struct usb_endpoint_descriptor *desc) return -EDOM; /* sanity check ep-e/ep-f since their fifos are small */ - max = le16_to_cpu (desc->wMaxPacketSize) & 0x1fff; + max = usb_endpoint_maxp (desc) & 0x1fff; if (ep->num > 4 && max > 64) return -ERANGE; @@ -1640,7 +1640,7 @@ show_queues (struct device *_dev, struct device_attribute *attr, char *buf) default: val = "iso"; break; }; val; }), - le16_to_cpu (d->wMaxPacketSize) & 0x1fff, + usb_endpoint_maxp (d) & 0x1fff, ep->dma ? "dma" : "pio", ep->fifo_size ); } else /* ep0 should only have one transfer queued */ diff --git a/drivers/usb/gadget/omap_udc.c b/drivers/usb/gadget/omap_udc.c index 740c7da..b7a7799 100644 --- a/drivers/usb/gadget/omap_udc.c +++ b/drivers/usb/gadget/omap_udc.c @@ -166,15 +166,14 @@ static int omap_ep_enable(struct usb_ep *_ep, if (!_ep || !desc || ep->desc || desc->bDescriptorType != USB_DT_ENDPOINT || ep->bEndpointAddress != desc->bEndpointAddress - || ep->maxpacket < le16_to_cpu - (desc->wMaxPacketSize)) { + || ep->maxpacket < usb_endpoint_maxp(desc)) { DBG("%s, bad ep or descriptor\n", __func__); return -EINVAL; } - maxp = le16_to_cpu (desc->wMaxPacketSize); + maxp = usb_endpoint_maxp(desc); if ((desc->bmAttributes == USB_ENDPOINT_XFER_BULK && maxp != ep->maxpacket) - || le16_to_cpu(desc->wMaxPacketSize) > ep->maxpacket + || usb_endpoint_maxp(desc) > ep->maxpacket || !desc->wMaxPacketSize) { DBG("%s, bad %s maxpacket\n", __func__, _ep->name); return -ERANGE; diff --git a/drivers/usb/gadget/pch_udc.c b/drivers/usb/gadget/pch_udc.c index f96615a..b69ae3e 100644 --- a/drivers/usb/gadget/pch_udc.c +++ b/drivers/usb/gadget/pch_udc.c @@ -947,7 +947,7 @@ static void pch_udc_ep_enable(struct pch_udc_ep *ep, else buff_size = UDC_EPOUT_BUFF_SIZE; pch_udc_ep_set_bufsz(ep, buff_size, ep->in); - pch_udc_ep_set_maxpkt(ep, le16_to_cpu(desc->wMaxPacketSize)); + pch_udc_ep_set_maxpkt(ep, usb_endpoint_maxp(desc)); pch_udc_ep_set_nak(ep); pch_udc_ep_fifo_flush(ep, ep->in); /* Configure the endpoint */ @@ -957,7 +957,7 @@ static void pch_udc_ep_enable(struct pch_udc_ep *ep, (cfg->cur_cfg << UDC_CSR_NE_CFG_SHIFT) | (cfg->cur_intf << UDC_CSR_NE_INTF_SHIFT) | (cfg->cur_alt << UDC_CSR_NE_ALT_SHIFT) | - le16_to_cpu(desc->wMaxPacketSize) << UDC_CSR_NE_MAX_PKT_SHIFT; + usb_endpoint_maxp(desc) << UDC_CSR_NE_MAX_PKT_SHIFT; if (ep->in) pch_udc_write_csr(ep->dev, val, UDC_EPIN_IDX(ep->num)); @@ -1466,7 +1466,7 @@ static int pch_udc_pcd_ep_enable(struct usb_ep *usbep, ep->desc = desc; ep->halted = 0; pch_udc_ep_enable(ep, &ep->dev->cfg_data, desc); - ep->ep.maxpacket = le16_to_cpu(desc->wMaxPacketSize); + ep->ep.maxpacket = usb_endpoint_maxp(desc); pch_udc_enable_ep_interrupts(ep->dev, PCH_UDC_EPINT(ep->in, ep->num)); spin_unlock_irqrestore(&dev->lock, iflags); return 0; diff --git a/drivers/usb/gadget/pxa25x_udc.c b/drivers/usb/gadget/pxa25x_udc.c index e4e59b4..7862465 100644 --- a/drivers/usb/gadget/pxa25x_udc.c +++ b/drivers/usb/gadget/pxa25x_udc.c @@ -232,8 +232,7 @@ static int pxa25x_ep_enable (struct usb_ep *_ep, if (!_ep || !desc || ep->desc || _ep->name == ep0name || desc->bDescriptorType != USB_DT_ENDPOINT || ep->bEndpointAddress != desc->bEndpointAddress - || ep->fifo_size < le16_to_cpu - (desc->wMaxPacketSize)) { + || ep->fifo_size < usb_endpoint_maxp (desc)) { DMSG("%s, bad ep or descriptor\n", __func__); return -EINVAL; } @@ -248,7 +247,7 @@ static int pxa25x_ep_enable (struct usb_ep *_ep, /* hardware _could_ do smaller, but driver doesn't */ if ((desc->bmAttributes == USB_ENDPOINT_XFER_BULK - && le16_to_cpu (desc->wMaxPacketSize) + && usb_endpoint_maxp (desc) != BULK_FIFO_SIZE) || !desc->wMaxPacketSize) { DMSG("%s, bad %s maxpacket\n", __func__, _ep->name); @@ -264,7 +263,7 @@ static int pxa25x_ep_enable (struct usb_ep *_ep, ep->desc = desc; ep->stopped = 0; ep->pio_irqs = 0; - ep->ep.maxpacket = le16_to_cpu (desc->wMaxPacketSize); + ep->ep.maxpacket = usb_endpoint_maxp (desc); /* flush fifo (mostly for OUT buffers) */ pxa25x_ep_fifo_flush (_ep); @@ -401,7 +400,7 @@ write_fifo (struct pxa25x_ep *ep, struct pxa25x_request *req) { unsigned max; - max = le16_to_cpu(ep->desc->wMaxPacketSize); + max = usb_endpoint_maxp(ep->desc); do { unsigned count; int is_last, is_short; @@ -671,8 +670,7 @@ pxa25x_ep_queue(struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags) * we can report per-packet status. that also helps with dma. */ if (unlikely (ep->bmAttributes == USB_ENDPOINT_XFER_ISOC - && req->req.length > le16_to_cpu - (ep->desc->wMaxPacketSize))) + && req->req.length > usb_endpoint_maxp (ep->desc))) return -EMSGSIZE; DBG(DBG_NOISY, "%s queue req %p, len %d buf %p\n", @@ -1105,7 +1103,7 @@ udc_seq_show(struct seq_file *m, void *_d) tmp = *dev->ep [i].reg_udccs; seq_printf(m, "%s max %d %s udccs %02x irqs %lu\n", - ep->ep.name, le16_to_cpu(desc->wMaxPacketSize), + ep->ep.name, usb_endpoint_maxp(desc), "pio", tmp, ep->pio_irqs); /* TODO translate all five groups of udccs bits! */ diff --git a/drivers/usb/gadget/pxa27x_udc.c b/drivers/usb/gadget/pxa27x_udc.c index 85b68c7..d21455f 100644 --- a/drivers/usb/gadget/pxa27x_udc.c +++ b/drivers/usb/gadget/pxa27x_udc.c @@ -1439,7 +1439,7 @@ static int pxa_ep_enable(struct usb_ep *_ep, return -EINVAL; } - if (ep->fifo_size < le16_to_cpu(desc->wMaxPacketSize)) { + if (ep->fifo_size < usb_endpoint_maxp(desc)) { ep_err(ep, "bad maxpacket\n"); return -ERANGE; } diff --git a/drivers/usb/gadget/r8a66597-udc.c b/drivers/usb/gadget/r8a66597-udc.c index 50991e5..61d0c65 100644 --- a/drivers/usb/gadget/r8a66597-udc.c +++ b/drivers/usb/gadget/r8a66597-udc.c @@ -341,7 +341,7 @@ static void r8a66597_ep_setting(struct r8a66597 *r8a66597, ep->pipectr = get_pipectr_addr(pipenum); ep->pipenum = pipenum; - ep->ep.maxpacket = le16_to_cpu(desc->wMaxPacketSize); + ep->ep.maxpacket = usb_endpoint_maxp(desc); r8a66597->pipenum2ep[pipenum] = ep; r8a66597->epaddr2ep[desc->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK] = ep; @@ -420,7 +420,7 @@ static int alloc_pipe_config(struct r8a66597_ep *ep, ep->type = info.type; info.epnum = desc->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK; - info.maxpacket = le16_to_cpu(desc->wMaxPacketSize); + info.maxpacket = usb_endpoint_maxp(desc); info.interval = desc->bInterval; if (desc->bEndpointAddress & USB_ENDPOINT_DIR_MASK) info.dir_in = 1; diff --git a/drivers/usb/gadget/s3c-hsotg.c b/drivers/usb/gadget/s3c-hsotg.c index 8bdee67..39b134d 100644 --- a/drivers/usb/gadget/s3c-hsotg.c +++ b/drivers/usb/gadget/s3c-hsotg.c @@ -2297,7 +2297,7 @@ static int s3c_hsotg_ep_enable(struct usb_ep *ep, return -EINVAL; } - mps = le16_to_cpu(desc->wMaxPacketSize); + mps = usb_endpoint_maxp(desc); /* note, we handle this here instead of s3c_hsotg_set_ep_maxpacket */ diff --git a/drivers/usb/gadget/s3c-hsudc.c b/drivers/usb/gadget/s3c-hsudc.c index 3e96cc5..25829b4 100644 --- a/drivers/usb/gadget/s3c-hsudc.c +++ b/drivers/usb/gadget/s3c-hsudc.c @@ -761,11 +761,11 @@ static int s3c_hsudc_ep_enable(struct usb_ep *_ep, if (!_ep || !desc || hsep->desc || _ep->name == ep0name || desc->bDescriptorType != USB_DT_ENDPOINT || hsep->bEndpointAddress != desc->bEndpointAddress - || ep_maxpacket(hsep) < le16_to_cpu(desc->wMaxPacketSize)) + || ep_maxpacket(hsep) < usb_endpoint_maxp(desc)) return -EINVAL; if ((desc->bmAttributes == USB_ENDPOINT_XFER_BULK - && le16_to_cpu(desc->wMaxPacketSize) != ep_maxpacket(hsep)) + && usb_endpoint_maxp(desc) != ep_maxpacket(hsep)) || !desc->wMaxPacketSize) return -ERANGE; @@ -781,7 +781,7 @@ static int s3c_hsudc_ep_enable(struct usb_ep *_ep, hsep->stopped = hsep->wedge = 0; hsep->desc = desc; - hsep->ep.maxpacket = le16_to_cpu(desc->wMaxPacketSize); + hsep->ep.maxpacket = usb_endpoint_maxp(desc); s3c_hsudc_set_halt(_ep, 0); __set_bit(ep_index(hsep), hsudc->regs + S3C_EIER); diff --git a/drivers/usb/gadget/s3c2410_udc.c b/drivers/usb/gadget/s3c2410_udc.c index 8d31848..2572854 100644 --- a/drivers/usb/gadget/s3c2410_udc.c +++ b/drivers/usb/gadget/s3c2410_udc.c @@ -1082,7 +1082,7 @@ static int s3c2410_udc_ep_enable(struct usb_ep *_ep, if (!dev->driver || dev->gadget.speed == USB_SPEED_UNKNOWN) return -ESHUTDOWN; - max = le16_to_cpu(desc->wMaxPacketSize) & 0x1fff; + max = usb_endpoint_maxp(desc) & 0x1fff; local_irq_save (flags); _ep->maxpacket = max & 0x7ff; diff --git a/drivers/usb/host/ohci-q.c b/drivers/usb/host/ohci-q.c index dd24fc1..15dc51d 100644 --- a/drivers/usb/host/ohci-q.c +++ b/drivers/usb/host/ohci-q.c @@ -428,7 +428,7 @@ static struct ed *ed_get ( ed->type = usb_pipetype(pipe); info |= (ep->desc.bEndpointAddress & ~USB_DIR_IN) << 7; - info |= le16_to_cpu(ep->desc.wMaxPacketSize) << 16; + info |= usb_endpoint_maxp(&ep->desc) << 16; if (udev->speed == USB_SPEED_LOW) info |= ED_LOWSPEED; /* only control transfers store pids in tds */ @@ -444,7 +444,7 @@ static struct ed *ed_get ( ed->load = usb_calc_bus_time ( udev->speed, !is_out, ed->type == PIPE_ISOCHRONOUS, - le16_to_cpu(ep->desc.wMaxPacketSize)) + usb_endpoint_maxp(&ep->desc)) / 1000; } } diff --git a/drivers/usb/host/r8a66597-hcd.c b/drivers/usb/host/r8a66597-hcd.c index 40a0d8b..a6f2564 100644 --- a/drivers/usb/host/r8a66597-hcd.c +++ b/drivers/usb/host/r8a66597-hcd.c @@ -959,7 +959,7 @@ static void init_pipe_info(struct r8a66597 *r8a66597, struct urb *urb, info.pipenum = get_empty_pipenum(r8a66597, ep); info.address = get_urb_to_r8a66597_addr(r8a66597, urb); info.epnum = usb_endpoint_num(ep); - info.maxpacket = le16_to_cpu(ep->wMaxPacketSize); + info.maxpacket = usb_endpoint_maxp(ep); info.type = get_r8a66597_type(usb_endpoint_type(ep)); info.bufnum = get_bufnum(info.pipenum); info.buf_bsize = get_buf_bsize(info.pipenum); diff --git a/drivers/usb/host/uhci-q.c b/drivers/usb/host/uhci-q.c index 84ed28b3..f6ca80e 100644 --- a/drivers/usb/host/uhci-q.c +++ b/drivers/usb/host/uhci-q.c @@ -280,7 +280,7 @@ static struct uhci_qh *uhci_alloc_qh(struct uhci_hcd *uhci, qh->load = usb_calc_bus_time(udev->speed, usb_endpoint_dir_in(&hep->desc), qh->type == USB_ENDPOINT_XFER_ISOC, - le16_to_cpu(hep->desc.wMaxPacketSize)) + usb_endpoint_maxp(&hep->desc)) / 1000 + 1; } else { /* Skeleton QH */ @@ -792,7 +792,7 @@ static int uhci_submit_control(struct uhci_hcd *uhci, struct urb *urb, { struct uhci_td *td; unsigned long destination, status; - int maxsze = le16_to_cpu(qh->hep->desc.wMaxPacketSize); + int maxsze = usb_endpoint_maxp(&qh->hep->desc); int len = urb->transfer_buffer_length; dma_addr_t data = urb->transfer_dma; __hc32 *plink; @@ -918,7 +918,7 @@ static int uhci_submit_common(struct uhci_hcd *uhci, struct urb *urb, { struct uhci_td *td; unsigned long destination, status; - int maxsze = le16_to_cpu(qh->hep->desc.wMaxPacketSize); + int maxsze = usb_endpoint_maxp(&qh->hep->desc); int len = urb->transfer_buffer_length; int this_sg_len; dma_addr_t data; diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c index d446886..d873a03 100644 --- a/drivers/usb/host/xhci-mem.c +++ b/drivers/usb/host/xhci-mem.c @@ -1141,8 +1141,8 @@ static u32 xhci_get_max_esit_payload(struct xhci_hcd *xhci, if (udev->speed == USB_SPEED_SUPER) return le16_to_cpu(ep->ss_ep_comp.wBytesPerInterval); - max_packet = GET_MAX_PACKET(le16_to_cpu(ep->desc.wMaxPacketSize)); - max_burst = (le16_to_cpu(ep->desc.wMaxPacketSize) & 0x1800) >> 11; + max_packet = GET_MAX_PACKET(usb_endpoint_maxp(&ep->desc)); + max_burst = (usb_endpoint_maxp(&ep->desc) & 0x1800) >> 11; /* A 0 in max burst means 1 transfer per ESIT */ return max_packet * (max_burst + 1); } @@ -1211,7 +1211,7 @@ int xhci_endpoint_init(struct xhci_hcd *xhci, /* Set the max packet size and max burst */ switch (udev->speed) { case USB_SPEED_SUPER: - max_packet = le16_to_cpu(ep->desc.wMaxPacketSize); + max_packet = usb_endpoint_maxp(&ep->desc); ep_ctx->ep_info2 |= cpu_to_le32(MAX_PACKET(max_packet)); /* dig out max burst from ep companion desc */ max_packet = ep->ss_ep_comp.bMaxBurst; @@ -1223,14 +1223,14 @@ int xhci_endpoint_init(struct xhci_hcd *xhci, */ if (usb_endpoint_xfer_isoc(&ep->desc) || usb_endpoint_xfer_int(&ep->desc)) { - max_burst = (le16_to_cpu(ep->desc.wMaxPacketSize) + max_burst = (usb_endpoint_maxp(&ep->desc) & 0x1800) >> 11; ep_ctx->ep_info2 |= cpu_to_le32(MAX_BURST(max_burst)); } /* Fall through */ case USB_SPEED_FULL: case USB_SPEED_LOW: - max_packet = GET_MAX_PACKET(le16_to_cpu(ep->desc.wMaxPacketSize)); + max_packet = GET_MAX_PACKET(usb_endpoint_maxp(&ep->desc)); ep_ctx->ep_info2 |= cpu_to_le32(MAX_PACKET(max_packet)); break; default: diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index 7113d16..bf0b52c 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -2676,7 +2676,7 @@ static u32 xhci_v1_0_td_remainder(int running_total, int trb_buff_len, * running_total. */ packets_transferred = (running_total + trb_buff_len) / - le16_to_cpu(urb->ep->desc.wMaxPacketSize); + usb_endpoint_maxp(&urb->ep->desc); return xhci_td_remainder(total_packet_count - packets_transferred); } @@ -2706,7 +2706,7 @@ static int queue_bulk_sg_tx(struct xhci_hcd *xhci, gfp_t mem_flags, num_trbs = count_sg_trbs_needed(xhci, urb); num_sgs = urb->num_sgs; total_packet_count = roundup(urb->transfer_buffer_length, - le16_to_cpu(urb->ep->desc.wMaxPacketSize)); + usb_endpoint_maxp(&urb->ep->desc)); trb_buff_len = prepare_transfer(xhci, xhci->devs[slot_id], ep_index, urb->stream_id, @@ -2913,7 +2913,7 @@ int xhci_queue_bulk_tx(struct xhci_hcd *xhci, gfp_t mem_flags, running_total = 0; total_packet_count = roundup(urb->transfer_buffer_length, - le16_to_cpu(urb->ep->desc.wMaxPacketSize)); + usb_endpoint_maxp(&urb->ep->desc)); /* How much data is in the first TRB? */ addr = (u64) urb->transfer_dma; trb_buff_len = TRB_MAX_BUFF_SIZE - @@ -3239,7 +3239,7 @@ static int xhci_queue_isoc_tx(struct xhci_hcd *xhci, gfp_t mem_flags, td_remain_len = td_len; /* FIXME: Ignoring zero-length packets, can those happen? */ total_packet_count = roundup(td_len, - le16_to_cpu(urb->ep->desc.wMaxPacketSize)); + usb_endpoint_maxp(&urb->ep->desc)); burst_count = xhci_get_burst_count(xhci, urb->dev, urb, total_packet_count); residue = xhci_get_last_burst_packet_count(xhci, diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index 1c4432d..f53596b 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -987,7 +987,7 @@ static int xhci_check_maxpacket(struct xhci_hcd *xhci, unsigned int slot_id, out_ctx = xhci->devs[slot_id]->out_ctx; ep_ctx = xhci_get_ep_ctx(xhci, out_ctx, ep_index); hw_max_packet_size = MAX_PACKET_DECODED(le32_to_cpu(ep_ctx->ep_info2)); - max_packet_size = le16_to_cpu(urb->dev->ep0.desc.wMaxPacketSize); + max_packet_size = usb_endpoint_maxp(&urb->dev->ep0.desc); if (hw_max_packet_size != max_packet_size) { xhci_dbg(xhci, "Max Packet Size for ep 0 changed.\n"); xhci_dbg(xhci, "Max packet size in usb_device = %d\n", diff --git a/drivers/usb/misc/adutux.c b/drivers/usb/misc/adutux.c index a6afd15..fe85871 100644 --- a/drivers/usb/misc/adutux.c +++ b/drivers/usb/misc/adutux.c @@ -213,7 +213,7 @@ static void adu_interrupt_in_callback(struct urb *urb) if (urb->actual_length > 0 && dev->interrupt_in_buffer[0] != 0x00) { if (dev->read_buffer_length < - (4 * le16_to_cpu(dev->interrupt_in_endpoint->wMaxPacketSize)) - + (4 * usb_endpoint_maxp(dev->interrupt_in_endpoint)) - (urb->actual_length)) { memcpy (dev->read_buffer_primary + dev->read_buffer_length, @@ -315,7 +315,7 @@ static int adu_open(struct inode *inode, struct file *file) usb_rcvintpipe(dev->udev, dev->interrupt_in_endpoint->bEndpointAddress), dev->interrupt_in_buffer, - le16_to_cpu(dev->interrupt_in_endpoint->wMaxPacketSize), + usb_endpoint_maxp(dev->interrupt_in_endpoint), adu_interrupt_in_callback, dev, dev->interrupt_in_endpoint->bInterval); dev->read_urb_finished = 0; @@ -483,7 +483,7 @@ static ssize_t adu_read(struct file *file, __user char *buffer, size_t count, usb_rcvintpipe(dev->udev, dev->interrupt_in_endpoint->bEndpointAddress), dev->interrupt_in_buffer, - le16_to_cpu(dev->interrupt_in_endpoint->wMaxPacketSize), + usb_endpoint_maxp(dev->interrupt_in_endpoint), adu_interrupt_in_callback, dev, dev->interrupt_in_endpoint->bInterval); @@ -536,7 +536,7 @@ static ssize_t adu_read(struct file *file, __user char *buffer, size_t count, usb_rcvintpipe(dev->udev, dev->interrupt_in_endpoint->bEndpointAddress), dev->interrupt_in_buffer, - le16_to_cpu(dev->interrupt_in_endpoint->wMaxPacketSize), + usb_endpoint_maxp(dev->interrupt_in_endpoint), adu_interrupt_in_callback, dev, dev->interrupt_in_endpoint->bInterval); @@ -622,7 +622,7 @@ static ssize_t adu_write(struct file *file, const __user char *buffer, dbg(4," %s : sending, count = %Zd", __func__, count); /* write the data into interrupt_out_buffer from userspace */ - buffer_size = le16_to_cpu(dev->interrupt_out_endpoint->wMaxPacketSize); + buffer_size = usb_endpoint_maxp(dev->interrupt_out_endpoint); bytes_to_write = count > buffer_size ? buffer_size : count; dbg(4," %s : buffer_size = %Zd, count = %Zd, bytes_to_write = %Zd", __func__, buffer_size, count, bytes_to_write); @@ -752,8 +752,8 @@ static int adu_probe(struct usb_interface *interface, goto error; } - in_end_size = le16_to_cpu(dev->interrupt_in_endpoint->wMaxPacketSize); - out_end_size = le16_to_cpu(dev->interrupt_out_endpoint->wMaxPacketSize); + in_end_size = usb_endpoint_maxp(dev->interrupt_in_endpoint); + out_end_size = usb_endpoint_maxp(dev->interrupt_out_endpoint); dev->read_buffer_primary = kmalloc((4 * in_end_size), GFP_KERNEL); if (!dev->read_buffer_primary) { diff --git a/drivers/usb/misc/ftdi-elan.c b/drivers/usb/misc/ftdi-elan.c index 2f41089c..2dbe600 100644 --- a/drivers/usb/misc/ftdi-elan.c +++ b/drivers/usb/misc/ftdi-elan.c @@ -2777,7 +2777,7 @@ static int ftdi_elan_probe(struct usb_interface *interface, endpoint = &iface_desc->endpoint[i].desc; if (!ftdi->bulk_in_endpointAddr && usb_endpoint_is_bulk_in(endpoint)) { - buffer_size = le16_to_cpu(endpoint->wMaxPacketSize); + buffer_size = usb_endpoint_maxp(endpoint); ftdi->bulk_in_size = buffer_size; ftdi->bulk_in_endpointAddr = endpoint->bEndpointAddress; ftdi->bulk_in_buffer = kmalloc(buffer_size, GFP_KERNEL); diff --git a/drivers/usb/misc/idmouse.c b/drivers/usb/misc/idmouse.c index c6184b4..515b67f 100644 --- a/drivers/usb/misc/idmouse.c +++ b/drivers/usb/misc/idmouse.c @@ -359,7 +359,7 @@ static int idmouse_probe(struct usb_interface *interface, endpoint = &iface_desc->endpoint[0].desc; if (!dev->bulk_in_endpointAddr && usb_endpoint_is_bulk_in(endpoint)) { /* we found a bulk in endpoint */ - dev->orig_bi_size = le16_to_cpu(endpoint->wMaxPacketSize); + dev->orig_bi_size = usb_endpoint_maxp(endpoint); dev->bulk_in_size = 0x200; /* works _much_ faster */ dev->bulk_in_endpointAddr = endpoint->bEndpointAddress; dev->bulk_in_buffer = diff --git a/drivers/usb/misc/iowarrior.c b/drivers/usb/misc/iowarrior.c index a2190b9..8145790 100644 --- a/drivers/usb/misc/iowarrior.c +++ b/drivers/usb/misc/iowarrior.c @@ -803,7 +803,7 @@ static int iowarrior_probe(struct usb_interface *interface, dev->int_out_endpoint = endpoint; } /* we have to check the report_size often, so remember it in the endianess suitable for our machine */ - dev->report_size = le16_to_cpu(dev->int_in_endpoint->wMaxPacketSize); + dev->report_size = usb_endpoint_maxp(dev->int_in_endpoint); if ((dev->interface->cur_altsetting->desc.bInterfaceNumber == 0) && (dev->product_id == USB_DEVICE_ID_CODEMERCS_IOW56)) /* IOWarrior56 has wMaxPacketSize different from report size */ diff --git a/drivers/usb/misc/ldusb.c b/drivers/usb/misc/ldusb.c index cb40962..48c166f 100644 --- a/drivers/usb/misc/ldusb.c +++ b/drivers/usb/misc/ldusb.c @@ -721,7 +721,7 @@ static int ld_usb_probe(struct usb_interface *intf, const struct usb_device_id * if (dev->interrupt_out_endpoint == NULL) dev_warn(&intf->dev, "Interrupt out endpoint not found (using control endpoint instead)\n"); - dev->interrupt_in_endpoint_size = le16_to_cpu(dev->interrupt_in_endpoint->wMaxPacketSize); + dev->interrupt_in_endpoint_size = usb_endpoint_maxp(dev->interrupt_in_endpoint); dev->ring_buffer = kmalloc(ring_buffer_size*(sizeof(size_t)+dev->interrupt_in_endpoint_size), GFP_KERNEL); if (!dev->ring_buffer) { dev_err(&intf->dev, "Couldn't allocate ring_buffer\n"); @@ -737,7 +737,7 @@ static int ld_usb_probe(struct usb_interface *intf, const struct usb_device_id * dev_err(&intf->dev, "Couldn't allocate interrupt_in_urb\n"); goto error; } - dev->interrupt_out_endpoint_size = dev->interrupt_out_endpoint ? le16_to_cpu(dev->interrupt_out_endpoint->wMaxPacketSize) : + dev->interrupt_out_endpoint_size = dev->interrupt_out_endpoint ? usb_endpoint_maxp(dev->interrupt_out_endpoint) : udev->descriptor.bMaxPacketSize0; dev->interrupt_out_buffer = kmalloc(write_buffer_size*dev->interrupt_out_endpoint_size, GFP_KERNEL); if (!dev->interrupt_out_buffer) { diff --git a/drivers/usb/misc/legousbtower.c b/drivers/usb/misc/legousbtower.c index 6482c6e..a989356 100644 --- a/drivers/usb/misc/legousbtower.c +++ b/drivers/usb/misc/legousbtower.c @@ -409,7 +409,7 @@ static int tower_open (struct inode *inode, struct file *file) dev->udev, usb_rcvintpipe(dev->udev, dev->interrupt_in_endpoint->bEndpointAddress), dev->interrupt_in_buffer, - le16_to_cpu(dev->interrupt_in_endpoint->wMaxPacketSize), + usb_endpoint_maxp(dev->interrupt_in_endpoint), tower_interrupt_in_callback, dev, dev->interrupt_in_interval); @@ -928,7 +928,7 @@ static int tower_probe (struct usb_interface *interface, const struct usb_device err("Couldn't allocate read_buffer"); goto error; } - dev->interrupt_in_buffer = kmalloc (le16_to_cpu(dev->interrupt_in_endpoint->wMaxPacketSize), GFP_KERNEL); + dev->interrupt_in_buffer = kmalloc (usb_endpoint_maxp(dev->interrupt_in_endpoint), GFP_KERNEL); if (!dev->interrupt_in_buffer) { err("Couldn't allocate interrupt_in_buffer"); goto error; diff --git a/drivers/usb/misc/usblcd.c b/drivers/usb/misc/usblcd.c index 6ac1069..1871cdf 100644 --- a/drivers/usb/misc/usblcd.c +++ b/drivers/usb/misc/usblcd.c @@ -347,7 +347,7 @@ static int lcd_probe(struct usb_interface *interface, if (!dev->bulk_in_endpointAddr && usb_endpoint_is_bulk_in(endpoint)) { /* we found a bulk in endpoint */ - buffer_size = le16_to_cpu(endpoint->wMaxPacketSize); + buffer_size = usb_endpoint_maxp(endpoint); dev->bulk_in_size = buffer_size; dev->bulk_in_endpointAddr = endpoint->bEndpointAddress; dev->bulk_in_buffer = kmalloc(buffer_size, GFP_KERNEL); diff --git a/drivers/usb/misc/usbtest.c b/drivers/usb/misc/usbtest.c index bd71500..930962f 100644 --- a/drivers/usb/misc/usbtest.c +++ b/drivers/usb/misc/usbtest.c @@ -1585,8 +1585,8 @@ static struct urb *iso_alloc_urb( if (bytes < 0 || !desc) return NULL; - maxp = 0x7ff & le16_to_cpu(desc->wMaxPacketSize); - maxp *= 1 + (0x3 & (le16_to_cpu(desc->wMaxPacketSize) >> 11)); + maxp = 0x7ff & usb_endpoint_maxp(desc); + maxp *= 1 + (0x3 & (usb_endpoint_maxp(desc) >> 11)); packets = DIV_ROUND_UP(bytes, maxp); urb = usb_alloc_urb(packets, GFP_KERNEL); @@ -1656,7 +1656,7 @@ test_iso_queue(struct usbtest_dev *dev, struct usbtest_param *param, "... iso period %d %sframes, wMaxPacket %04x\n", 1 << (desc->bInterval - 1), (udev->speed == USB_SPEED_HIGH) ? "micro" : "", - le16_to_cpu(desc->wMaxPacketSize)); + usb_endpoint_maxp(desc)); for (i = 0; i < param->sglen; i++) { urbs[i] = iso_alloc_urb(udev, pipe, desc, diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c index 8c41a2e..44b331a 100644 --- a/drivers/usb/musb/musb_gadget.c +++ b/drivers/usb/musb/musb_gadget.c @@ -1020,7 +1020,7 @@ static int musb_gadget_enable(struct usb_ep *ep, goto fail; /* REVISIT this rules out high bandwidth periodic transfers */ - tmp = le16_to_cpu(desc->wMaxPacketSize); + tmp = usb_endpoint_maxp(desc); if (tmp & ~0x07ff) { int ok; diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c index 8b2473f..60ddba8 100644 --- a/drivers/usb/musb/musb_host.c +++ b/drivers/usb/musb/musb_host.c @@ -1932,7 +1932,7 @@ static int musb_urb_enqueue( INIT_LIST_HEAD(&qh->ring); qh->is_ready = 1; - qh->maxpacket = le16_to_cpu(epd->wMaxPacketSize); + qh->maxpacket = usb_endpoint_maxp(epd); qh->type = usb_endpoint_type(epd); /* Bits 11 & 12 of wMaxPacketSize encode high bandwidth multiplier. diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index 78a2cf9..8aee28b 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -1480,7 +1480,7 @@ static void ftdi_set_max_packet_size(struct usb_serial_port *port) } /* set max packet size based on descriptor */ - priv->max_packet_size = le16_to_cpu(ep_desc->wMaxPacketSize); + priv->max_packet_size = usb_endpoint_maxp(ep_desc); dev_info(&udev->dev, "Setting MaxPacketSize %d\n", priv->max_packet_size); } diff --git a/drivers/usb/serial/io_edgeport.c b/drivers/usb/serial/io_edgeport.c index abf095be..2ee8075 100644 --- a/drivers/usb/serial/io_edgeport.c +++ b/drivers/usb/serial/io_edgeport.c @@ -3042,7 +3042,7 @@ static int edge_startup(struct usb_serial *serial) endpoint = &serial->interface->altsetting[0]. endpoint[i].desc; - buffer_size = le16_to_cpu(endpoint->wMaxPacketSize); + buffer_size = usb_endpoint_maxp(endpoint); if (!interrupt_in_found && (usb_endpoint_is_int_in(endpoint))) { /* we found a interrupt in endpoint */ @@ -3107,7 +3107,7 @@ static int edge_startup(struct usb_serial *serial) usb_rcvbulkpipe(dev, endpoint->bEndpointAddress), edge_serial->bulk_in_buffer, - le16_to_cpu(endpoint->wMaxPacketSize), + usb_endpoint_maxp(endpoint), edge_bulk_in_callback, edge_serial); bulk_in_found = true; diff --git a/drivers/usb/serial/opticon.c b/drivers/usb/serial/opticon.c index 96423f3..c248a91 100644 --- a/drivers/usb/serial/opticon.c +++ b/drivers/usb/serial/opticon.c @@ -523,7 +523,7 @@ static int opticon_startup(struct usb_serial *serial) goto error; } - priv->buffer_size = le16_to_cpu(endpoint->wMaxPacketSize) * 2; + priv->buffer_size = usb_endpoint_maxp(endpoint) * 2; priv->bulk_in_buffer = kmalloc(priv->buffer_size, GFP_KERNEL); if (!priv->bulk_in_buffer) { dev_err(&priv->udev->dev, "out of memory\n"); diff --git a/drivers/usb/serial/symbolserial.c b/drivers/usb/serial/symbolserial.c index d9457bd..7096f79 100644 --- a/drivers/usb/serial/symbolserial.c +++ b/drivers/usb/serial/symbolserial.c @@ -226,7 +226,7 @@ static int symbol_startup(struct usb_serial *serial) goto error; } - priv->buffer_size = le16_to_cpu(endpoint->wMaxPacketSize) * 2; + priv->buffer_size = usb_endpoint_maxp(endpoint) * 2; priv->int_buffer = kmalloc(priv->buffer_size, GFP_KERNEL); if (!priv->int_buffer) { dev_err(&priv->udev->dev, "out of memory\n"); diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c index 1c03130..cc274fd 100644 --- a/drivers/usb/serial/usb-serial.c +++ b/drivers/usb/serial/usb-serial.c @@ -912,7 +912,7 @@ int usb_serial_probe(struct usb_interface *interface, goto probe_error; } buffer_size = max_t(int, serial->type->bulk_in_size, - le16_to_cpu(endpoint->wMaxPacketSize)); + usb_endpoint_maxp(endpoint)); port->bulk_in_size = buffer_size; port->bulk_in_endpointAddress = endpoint->bEndpointAddress; port->bulk_in_buffer = kmalloc(buffer_size, GFP_KERNEL); @@ -942,7 +942,7 @@ int usb_serial_probe(struct usb_interface *interface, goto probe_error; buffer_size = serial->type->bulk_out_size; if (!buffer_size) - buffer_size = le16_to_cpu(endpoint->wMaxPacketSize); + buffer_size = usb_endpoint_maxp(endpoint); port->bulk_out_size = buffer_size; port->bulk_out_endpointAddress = endpoint->bEndpointAddress; port->bulk_out_buffer = kmalloc(buffer_size, GFP_KERNEL); @@ -990,7 +990,7 @@ int usb_serial_probe(struct usb_interface *interface, "No free urbs available\n"); goto probe_error; } - buffer_size = le16_to_cpu(endpoint->wMaxPacketSize); + buffer_size = usb_endpoint_maxp(endpoint); port->interrupt_in_endpointAddress = endpoint->bEndpointAddress; port->interrupt_in_buffer = kmalloc(buffer_size, @@ -1021,7 +1021,7 @@ int usb_serial_probe(struct usb_interface *interface, "No free urbs available\n"); goto probe_error; } - buffer_size = le16_to_cpu(endpoint->wMaxPacketSize); + buffer_size = usb_endpoint_maxp(endpoint); port->interrupt_out_size = buffer_size; port->interrupt_out_endpointAddress = endpoint->bEndpointAddress; diff --git a/drivers/usb/usb-skeleton.c b/drivers/usb/usb-skeleton.c index e24ce31..32d6fc9 100644 --- a/drivers/usb/usb-skeleton.c +++ b/drivers/usb/usb-skeleton.c @@ -555,7 +555,7 @@ static int skel_probe(struct usb_interface *interface, if (!dev->bulk_in_endpointAddr && usb_endpoint_is_bulk_in(endpoint)) { /* we found a bulk in endpoint */ - buffer_size = le16_to_cpu(endpoint->wMaxPacketSize); + buffer_size = usb_endpoint_maxp(endpoint); dev->bulk_in_size = buffer_size; dev->bulk_in_endpointAddr = endpoint->bEndpointAddress; dev->bulk_in_buffer = kmalloc(buffer_size, GFP_KERNEL); diff --git a/drivers/usb/wusbcore/wa-hc.c b/drivers/usb/wusbcore/wa-hc.c index 59a748a..0d1863c 100644 --- a/drivers/usb/wusbcore/wa-hc.c +++ b/drivers/usb/wusbcore/wa-hc.c @@ -43,7 +43,7 @@ int wa_create(struct wahc *wa, struct usb_interface *iface) /* Fill up Data Transfer EP pointers */ wa->dti_epd = &iface->cur_altsetting->endpoint[1].desc; wa->dto_epd = &iface->cur_altsetting->endpoint[2].desc; - wa->xfer_result_size = le16_to_cpu(wa->dti_epd->wMaxPacketSize); + wa->xfer_result_size = usb_endpoint_maxp(wa->dti_epd); wa->xfer_result = kmalloc(wa->xfer_result_size, GFP_KERNEL); if (wa->xfer_result == NULL) goto error_xfer_result_alloc; diff --git a/include/linux/usb.h b/include/linux/usb.h index 73c7df4..c19f910 100644 --- a/include/linux/usb.h +++ b/include/linux/usb.h @@ -1574,7 +1574,7 @@ usb_maxpacket(struct usb_device *udev, int pipe, int is_out) return 0; /* NOTE: only 0x07ff bits are for packet size... */ - return le16_to_cpu(ep->desc.wMaxPacketSize); + return usb_endpoint_maxp(&ep->desc); } /* ----------------------------------------------------------------------- */ -- cgit v0.10.2 From 096cb25d624289a054c9e4d0537c26c0a5eff487 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Tue, 23 Aug 2011 12:52:47 -0700 Subject: usb: fix dwc3 build when USB_GADGET_DWC3 is not enabled Fix build error when CONFIG_USB_GADGET_DWC3 is not enabled: ERROR: "dwc3_send_gadget_ep_cmd" [drivers/usb/dwc3/dwc3.ko] undefined! Signed-off-by: Randy Dunlap Acked-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/dwc3/gadget.h b/drivers/usb/dwc3/gadget.h index ccfc109..4809ac8 100644 --- a/drivers/usb/dwc3/gadget.h +++ b/drivers/usb/dwc3/gadget.h @@ -202,6 +202,11 @@ void dwc3_gadget_exit(struct dwc3 *dwc); #else static inline int dwc3_gadget_init(struct dwc3 *dwc) { return 0; } static inline void dwc3_gadget_exit(struct dwc3 *dwc) { } +static inline int dwc3_send_gadget_ep_cmd(struct dwc3 *dwc, unsigned ep, + unsigned cmd, struct dwc3_gadget_ep_cmd_params *params) +{ + return 0; +} #endif void dwc3_gadget_giveback(struct dwc3_ep *dep, struct dwc3_request *req, -- cgit v0.10.2 From 5d7a1c8a81244e8ea16d9a87b4434557f9103e3c Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Tue, 23 Aug 2011 11:22:37 -0700 Subject: usb: fix ipw.c build error, select USB_SERIAL_WWAN USB_SERIAL_IPW needs to select USB_SERIAL_WWAN to fix build errors: ipw.c:(.text+0x333841): undefined reference to `usb_wwan_close' ipw.c:(.text+0x3339e6): undefined reference to `usb_wwan_open' ipw.c:(.text+0x333bb9): undefined reference to `usb_wwan_release' drivers/built-in.o:(.data+0x29dac): undefined reference to `usb_wwan_startup' drivers/built-in.o:(.data+0x29db4): undefined reference to `usb_wwan_disconnect' drivers/built-in.o:(.data+0x29dd4): undefined reference to `usb_wwan_write' Signed-off-by: Randy Dunlap Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/Kconfig b/drivers/usb/serial/Kconfig index b71e309..677f577 100644 --- a/drivers/usb/serial/Kconfig +++ b/drivers/usb/serial/Kconfig @@ -252,6 +252,7 @@ config USB_SERIAL_GARMIN config USB_SERIAL_IPW tristate "USB IPWireless (3G UMTS TDD) Driver" + select USB_SERIAL_WWAN help Say Y here if you want to use a IPWireless USB modem such as the ones supplied by Axity3G/Sentech South Africa. -- cgit v0.10.2 From 2e5a08a3693e4c5bd251afc13246bc86fc9fafc3 Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Wed, 24 Aug 2011 08:41:11 +0200 Subject: USB gadget i.MX1: remove dependency on ARCH_MXC The ARCH_MX1 scheduled for removal. Instead, depend on ARCH_MXC and make clear in the Kconfig text that only i.MX1 has this hardware. Signed-off-by: Sascha Hauer Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig index bb799d5..fe56379 100644 --- a/drivers/usb/gadget/Kconfig +++ b/drivers/usb/gadget/Kconfig @@ -255,12 +255,11 @@ config USB_S3C_HSOTG integrated into the S3C64XX series SoC. config USB_IMX - tristate "Freescale IMX USB Peripheral Controller" - depends on ARCH_MX1 + tristate "Freescale i.MX1 USB Peripheral Controller" + depends on ARCH_MXC help - Freescale's IMX series include an integrated full speed - USB 1.1 device controller. The controller in the IMX series - is register-compatible. + Freescale's i.MX1 includes an integrated full speed + USB 1.1 device controller. It has Six fixed-function endpoints, as well as endpoint zero (for control transfers). -- cgit v0.10.2 From 5de9ec4dc10e1a39b924fb165bcb3ddb6e8e6525 Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Wed, 24 Aug 2011 08:41:10 +0200 Subject: USB host i.MX21: remove dependency on MACH_MX21 the MACH_MX* macros are scheduled for removal, so just depend on ARCH_MXC instead. The Kconfig text makes it clear on which SoC the driver runs on. Signed-off-by: Sascha Hauer Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig index 5791fe9..13e1f67 100644 --- a/drivers/usb/host/Kconfig +++ b/drivers/usb/host/Kconfig @@ -544,11 +544,11 @@ config USB_HWA_HCD will be called "hwa-hc". config USB_IMX21_HCD - tristate "iMX21 HCD support" - depends on USB && ARM && MACH_MX21 + tristate "i.MX21 HCD support" + depends on USB && ARM && ARCH_MXC help This driver enables support for the on-chip USB host in the - iMX21 processor. + i.MX21 processor. To compile this driver as a module, choose M here: the module will be called "imx21-hcd". -- cgit v0.10.2 From 065e60964e293227e4feb0c1f7e27e609316ed9a Mon Sep 17 00:00:00 2001 From: Adam Cozzette Date: Wed, 24 Aug 2011 12:22:37 -0600 Subject: ums_realtek: do not use stack memory for DMA This patch changes rts51x_read_mem, rts51x_write_mem, and rts51x_read_status to allocate temporary buffers with kmalloc. This way stack addresses are not used for DMA when these functions call rts51x_bulk_transport. Signed-off-by: Adam Cozzette Cc: stable Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/storage/realtek_cr.c b/drivers/usb/storage/realtek_cr.c index 34adc4b..232167a 100644 --- a/drivers/usb/storage/realtek_cr.c +++ b/drivers/usb/storage/realtek_cr.c @@ -320,6 +320,11 @@ static int rts51x_read_mem(struct us_data *us, u16 addr, u8 *data, u16 len) { int retval; u8 cmnd[12] = { 0 }; + u8 *buf; + + buf = kmalloc(len, GFP_NOIO); + if (buf == NULL) + return USB_STOR_TRANSPORT_ERROR; US_DEBUGP("%s, addr = 0x%x, len = %d\n", __func__, addr, len); @@ -331,10 +336,14 @@ static int rts51x_read_mem(struct us_data *us, u16 addr, u8 *data, u16 len) cmnd[5] = (u8) len; retval = rts51x_bulk_transport(us, 0, cmnd, 12, - data, len, DMA_FROM_DEVICE, NULL); - if (retval != USB_STOR_TRANSPORT_GOOD) + buf, len, DMA_FROM_DEVICE, NULL); + if (retval != USB_STOR_TRANSPORT_GOOD) { + kfree(buf); return -EIO; + } + memcpy(data, buf, len); + kfree(buf); return 0; } @@ -342,6 +351,12 @@ static int rts51x_write_mem(struct us_data *us, u16 addr, u8 *data, u16 len) { int retval; u8 cmnd[12] = { 0 }; + u8 *buf; + + buf = kmalloc(len, GFP_NOIO); + if (buf == NULL) + return USB_STOR_TRANSPORT_ERROR; + memcpy(buf, data, len); US_DEBUGP("%s, addr = 0x%x, len = %d\n", __func__, addr, len); @@ -353,7 +368,8 @@ static int rts51x_write_mem(struct us_data *us, u16 addr, u8 *data, u16 len) cmnd[5] = (u8) len; retval = rts51x_bulk_transport(us, 0, cmnd, 12, - data, len, DMA_TO_DEVICE, NULL); + buf, len, DMA_TO_DEVICE, NULL); + kfree(buf); if (retval != USB_STOR_TRANSPORT_GOOD) return -EIO; @@ -365,6 +381,11 @@ static int rts51x_read_status(struct us_data *us, { int retval; u8 cmnd[12] = { 0 }; + u8 *buf; + + buf = kmalloc(len, GFP_NOIO); + if (buf == NULL) + return USB_STOR_TRANSPORT_ERROR; US_DEBUGP("%s, lun = %d\n", __func__, lun); @@ -372,10 +393,14 @@ static int rts51x_read_status(struct us_data *us, cmnd[1] = 0x09; retval = rts51x_bulk_transport(us, lun, cmnd, 12, - status, len, DMA_FROM_DEVICE, actlen); - if (retval != USB_STOR_TRANSPORT_GOOD) + buf, len, DMA_FROM_DEVICE, actlen); + if (retval != USB_STOR_TRANSPORT_GOOD) { + kfree(buf); return -EIO; + } + memcpy(status, buf, len); + kfree(buf); return 0; } -- cgit v0.10.2 From 55a46269ccedec140e2487a2344e8a247d48b385 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Micha=C5=82=20Sroczy=C5=84ski?= Date: Thu, 25 Aug 2011 19:52:27 +0200 Subject: USB: pl2303: remove unreachable code Signed-off-by: Michal Sroczynski Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c index 1d33260..0ae840f 100644 --- a/drivers/usb/serial/pl2303.c +++ b/drivers/usb/serial/pl2303.c @@ -360,9 +360,6 @@ static void pl2303_set_termios(struct tty_struct *tty, tmp >>= 2; buf[1] <<= 1; } - if (tmp > 256) { - tmp %= 256; - } buf[0] = tmp; } } -- cgit v0.10.2