From ed19ece135a6908244e22e4ab395165999a4d3ab Mon Sep 17 00:00:00 2001 From: Wenyou Yang Date: Thu, 29 Sep 2016 18:07:07 +0800 Subject: usb: ohci-at91: Set RemoteWakeupConnected bit explicitly. The reset value of RWC is 0, set RemoteWakeupConnected bit explicitly before calling ohci_run, it also fixes the issue that the mass storage stick connected wasn't suspended when the system suspend. Signed-off-by: Wenyou Yang Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/host/ohci-at91.c b/drivers/usb/host/ohci-at91.c index 5b5880c..b38a228 100644 --- a/drivers/usb/host/ohci-at91.c +++ b/drivers/usb/host/ohci-at91.c @@ -221,6 +221,12 @@ static int usb_hcd_at91_probe(const struct hc_driver *driver, ohci->num_ports = board->ports; at91_start_hc(pdev); + /* + * The RemoteWakeupConnected bit has to be set explicitly + * before calling ohci_run. The reset value of this bit is 0. + */ + ohci->hc_control = OHCI_CTRL_RWC; + retval = usb_add_hcd(hcd, irq, IRQF_SHARED); if (retval == 0) { device_wakeup_enable(hcd->self.controller); @@ -677,9 +683,6 @@ ohci_hcd_at91_drv_suspend(struct device *dev) * REVISIT: some boards will be able to turn VBUS off... */ if (!ohci_at91->wakeup) { - ohci->hc_control = ohci_readl(ohci, &ohci->regs->control); - ohci->hc_control &= OHCI_CTRL_RWC; - ohci_writel(ohci, ohci->hc_control, &ohci->regs->control); ohci->rh_state = OHCI_RH_HALTED; /* flush the writes */ -- cgit v0.10.2