From 456bb1697ec08c034449c81e03094fe26bedb9e9 Mon Sep 17 00:00:00 2001 From: Ming Lei Date: Tue, 21 Dec 2010 21:16:11 +0800 Subject: usb: musb: fix kernel panic during s2ram(v2) This patch fixes kernel panic during s2ram, which is caused by the below: - musb is not put into drv data of musb platform device if CONFIG_USB_MUSB_HDRC_HCD is defined - glue layer driver always get musb instance via platform_get_drvdata. The patch fixes the issue by always puting musb into drv data of musb platform device, which is doable even the platform device is a host controller device. Cc: Alan Stern Cc: Sergei Shtylyov Signed-off-by: Ming Lei Signed-off-by: Felipe Balbi diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c index 07cf394..12b515b 100644 --- a/drivers/usb/musb/musb_core.c +++ b/drivers/usb/musb/musb_core.c @@ -128,12 +128,7 @@ MODULE_ALIAS("platform:" MUSB_DRIVER_NAME); static inline struct musb *dev_to_musb(struct device *dev) { -#ifdef CONFIG_USB_MUSB_HDRC_HCD - /* usbcore insists dev->driver_data is a "struct hcd *" */ - return hcd_to_musb(dev_get_drvdata(dev)); -#else return dev_get_drvdata(dev); -#endif } /*-------------------------------------------------------------------------*/ @@ -1876,10 +1871,9 @@ allocate_instance(struct device *dev, musb = kzalloc(sizeof *musb, GFP_KERNEL); if (!musb) return NULL; - dev_set_drvdata(dev, musb); #endif - + dev_set_drvdata(dev, musb); musb->mregs = mbase; musb->ctrl_base = mbase; musb->nIrq = -ENODEV; -- cgit v0.10.2 From 541079de88735152a993ff93e90096643730a054 Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Fri, 10 Dec 2010 21:03:29 +0300 Subject: usb: musb: core: fix IRQ check musb_probe() only regards 0 as a wrong IRQ number, despite platform_get_irq() that it calls returns -ENXIO in that case. It leads to musb_init_controller() calling request_irq() with a negative IRQ number, and when it naturally fails, the following is printed to the console: request_irq -6 failed! musb_init_controller failed with status -19 Fix musb_probe() to filter out the error values as well as 0. Signed-off-by: Sergei Shtylyov Signed-off-by: Felipe Balbi diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c index 12b515b..54a8bd1 100644 --- a/drivers/usb/musb/musb_core.c +++ b/drivers/usb/musb/musb_core.c @@ -2185,7 +2185,7 @@ static int __init musb_probe(struct platform_device *pdev) void __iomem *base; iomem = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!iomem || irq == 0) + if (!iomem || irq <= 0) return -ENODEV; base = ioremap(iomem->start, resource_size(iomem)); -- cgit v0.10.2 From 9c668079c864c3b49d8deb56dafedf916b2a72d0 Mon Sep 17 00:00:00 2001 From: Bob Liu Date: Wed, 5 Jan 2011 17:36:41 +0800 Subject: usb: musb: hsdma: change back to use musb_read/writew Blackfin platform doesn't support 32bits musbdma registers, so change back to use musb_read/writew instead of musb_read/writel and simply some format casts. Signed-off-by: Bob Liu Signed-off-by: Felipe Balbi diff --git a/drivers/usb/musb/musbhsdma.h b/drivers/usb/musb/musbhsdma.h index f763d62..21056c9 100644 --- a/drivers/usb/musb/musbhsdma.h +++ b/drivers/usb/musb/musbhsdma.h @@ -94,24 +94,33 @@ static inline void musb_write_hsdma_addr(void __iomem *mbase, { musb_writew(mbase, MUSB_HSDMA_CHANNEL_OFFSET(bchannel, MUSB_HSDMA_ADDR_LOW), - ((u16)((u32) dma_addr & 0xFFFF))); + dma_addr); musb_writew(mbase, MUSB_HSDMA_CHANNEL_OFFSET(bchannel, MUSB_HSDMA_ADDR_HIGH), - ((u16)(((u32) dma_addr >> 16) & 0xFFFF))); + (dma_addr >> 16)); } static inline u32 musb_read_hsdma_count(void __iomem *mbase, u8 bchannel) { - return musb_readl(mbase, + u32 count = musb_readw(mbase, MUSB_HSDMA_CHANNEL_OFFSET(bchannel, MUSB_HSDMA_COUNT_HIGH)); + + count = count << 16; + + count |= musb_readw(mbase, + MUSB_HSDMA_CHANNEL_OFFSET(bchannel, MUSB_HSDMA_COUNT_LOW)); + + return count; } static inline void musb_write_hsdma_count(void __iomem *mbase, u8 bchannel, u32 len) { - musb_writel(mbase, + musb_writew(mbase, + MUSB_HSDMA_CHANNEL_OFFSET(bchannel, MUSB_HSDMA_COUNT_LOW),len); + musb_writew(mbase, MUSB_HSDMA_CHANNEL_OFFSET(bchannel, MUSB_HSDMA_COUNT_HIGH), - len); + (len >> 16)); } #endif /* CONFIG_BLACKFIN */ -- cgit v0.10.2 From 0662481855c389b75a0a54c32870cc90563d80a9 Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Fri, 21 Jan 2011 13:39:20 +0800 Subject: usb: musb: disable double buffering when it's broken We know that blackfin doesn't support double buffering feature as of today. So we add a flag set by musb_platform_init() to forcefully disable that feature. Such flag is created and marked as deprecated to force us to find a solution for the missing double buffering support on blackfin. Signed-off-by: Felipe Balbi diff --git a/drivers/usb/musb/blackfin.c b/drivers/usb/musb/blackfin.c index eeba228..9d49d1c 100644 --- a/drivers/usb/musb/blackfin.c +++ b/drivers/usb/musb/blackfin.c @@ -404,6 +404,7 @@ static int bfin_musb_init(struct musb *musb) musb->xceiv->set_power = bfin_musb_set_power; musb->isr = blackfin_interrupt; + musb->double_buffer_not_ok = true; return 0; } diff --git a/drivers/usb/musb/musb_core.h b/drivers/usb/musb/musb_core.h index d0c236f..d74a811 100644 --- a/drivers/usb/musb/musb_core.h +++ b/drivers/usb/musb/musb_core.h @@ -488,6 +488,18 @@ struct musb { unsigned set_address:1; unsigned test_mode:1; unsigned softconnect:1; + /* + * FIXME: Remove this flag. + * + * This is only added to allow Blackfin to work + * with current driver. For some unknown reason + * Blackfin doesn't work with double buffering + * and that's enabled by default. + * + * We added this flag to forcefully disable double + * buffering until we get it working. + */ + unsigned double_buffer_not_ok:1 __deprecated; u8 address; u8 test_mode_nr; diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c index ed58c6c..23dad4c 100644 --- a/drivers/usb/musb/musb_gadget.c +++ b/drivers/usb/musb/musb_gadget.c @@ -989,7 +989,11 @@ static int musb_gadget_enable(struct usb_ep *ep, /* Set TXMAXP with the FIFO size of the endpoint * to disable double buffering mode. */ - musb_writew(regs, MUSB_TXMAXP, musb_ep->packet_sz | (musb_ep->hb_mult << 11)); + if (musb->double_buffer_not_ok) + musb_writew(regs, MUSB_TXMAXP, hw_ep->max_packet_sz_tx); + else + musb_writew(regs, MUSB_TXMAXP, musb_ep->packet_sz + | (musb_ep->hb_mult << 11)); csr = MUSB_TXCSR_MODE | MUSB_TXCSR_CLRDATATOG; if (musb_readw(regs, MUSB_TXCSR) @@ -1025,7 +1029,11 @@ static int musb_gadget_enable(struct usb_ep *ep, /* Set RXMAXP with the FIFO size of the endpoint * to disable double buffering mode. */ - musb_writew(regs, MUSB_RXMAXP, musb_ep->packet_sz | (musb_ep->hb_mult << 11)); + if (musb->double_buffer_not_ok) + musb_writew(regs, MUSB_RXMAXP, hw_ep->max_packet_sz_tx); + else + musb_writew(regs, MUSB_RXMAXP, musb_ep->packet_sz + | (musb_ep->hb_mult << 11)); /* force shared fifo to OUT-only mode */ if (hw_ep->is_shared_fifo) { diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c index 4d5bcb4..0f523d7 100644 --- a/drivers/usb/musb/musb_host.c +++ b/drivers/usb/musb/musb_host.c @@ -609,7 +609,7 @@ musb_rx_reinit(struct musb *musb, struct musb_qh *qh, struct musb_hw_ep *ep) /* Set RXMAXP with the FIFO size of the endpoint * to disable double buffer mode. */ - if (musb->hwvers < MUSB_HWVERS_2000) + if (musb->double_buffer_not_ok) musb_writew(ep->regs, MUSB_RXMAXP, ep->max_packet_sz_rx); else musb_writew(ep->regs, MUSB_RXMAXP, @@ -784,14 +784,13 @@ static void musb_ep_program(struct musb *musb, u8 epnum, /* protocol/endpoint/interval/NAKlimit */ if (epnum) { musb_writeb(epio, MUSB_TXTYPE, qh->type_reg); - if (can_bulk_split(musb, qh->type)) + if (musb->double_buffer_not_ok) musb_writew(epio, MUSB_TXMAXP, - packet_sz - | ((hw_ep->max_packet_sz_tx / - packet_sz) - 1) << 11); + hw_ep->max_packet_sz_tx); else musb_writew(epio, MUSB_TXMAXP, - packet_sz); + qh->maxpacket | + ((qh->hb_mult - 1) << 11)); musb_writeb(epio, MUSB_TXINTERVAL, qh->intv_reg); } else { musb_writeb(epio, MUSB_NAKLIMIT0, qh->intv_reg); -- cgit v0.10.2 From c65bfa62b7185bdeb063c2a637f501f00997d068 Mon Sep 17 00:00:00 2001 From: Mian Yousaf Kaukab Date: Tue, 4 Jan 2011 12:47:02 +0100 Subject: usb: musb: maintain three states for buffer mappings instead of two If dma buffers are mapped by a higher layer, with a boolean musb_request.mapped it is still possible to call dma_sync_single_for_device() from musb_g_giveback(), even if txstate()/rxstate() has called unmap_dma_buffer() before falling back to pio mode. Moreover, check for musb_ep->dma is moved within map_dma_buffer() so where applicable checks for it are removed. And where possible, checks for is_dma_capable() are merged with buffer map state check. Signed-off-by: Mian Yousaf Kaukab Signed-off-by: Felipe Balbi diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c index 23dad4c..6577503 100644 --- a/drivers/usb/musb/musb_gadget.c +++ b/drivers/usb/musb/musb_gadget.c @@ -92,11 +92,19 @@ /* ----------------------------------------------------------------------- */ +#define is_buffer_mapped(req) (is_dma_capable() && \ + (req->map_state != UN_MAPPED)) + /* Maps the buffer to dma */ static inline void map_dma_buffer(struct musb_request *request, - struct musb *musb) + struct musb *musb, struct musb_ep *musb_ep) { + request->map_state = UN_MAPPED; + + if (!is_dma_capable() || !musb_ep->dma) + return; + if (request->request.dma == DMA_ADDR_INVALID) { request->request.dma = dma_map_single( musb->controller, @@ -105,7 +113,7 @@ static inline void map_dma_buffer(struct musb_request *request, request->tx ? DMA_TO_DEVICE : DMA_FROM_DEVICE); - request->mapped = 1; + request->map_state = MUSB_MAPPED; } else { dma_sync_single_for_device(musb->controller, request->request.dma, @@ -113,7 +121,7 @@ static inline void map_dma_buffer(struct musb_request *request, request->tx ? DMA_TO_DEVICE : DMA_FROM_DEVICE); - request->mapped = 0; + request->map_state = PRE_MAPPED; } } @@ -121,11 +129,14 @@ static inline void map_dma_buffer(struct musb_request *request, static inline void unmap_dma_buffer(struct musb_request *request, struct musb *musb) { + if (!is_buffer_mapped(request)) + return; + if (request->request.dma == DMA_ADDR_INVALID) { DBG(20, "not unmapping a never mapped buffer\n"); return; } - if (request->mapped) { + if (request->map_state == MUSB_MAPPED) { dma_unmap_single(musb->controller, request->request.dma, request->request.length, @@ -133,16 +144,15 @@ static inline void unmap_dma_buffer(struct musb_request *request, ? DMA_TO_DEVICE : DMA_FROM_DEVICE); request->request.dma = DMA_ADDR_INVALID; - request->mapped = 0; - } else { + } else { /* PRE_MAPPED */ dma_sync_single_for_cpu(musb->controller, request->request.dma, request->request.length, request->tx ? DMA_TO_DEVICE : DMA_FROM_DEVICE); - } + request->map_state = UN_MAPPED; } /* @@ -172,8 +182,7 @@ __acquires(ep->musb->lock) ep->busy = 1; spin_unlock(&musb->lock); - if (is_dma_capable() && ep->dma) - unmap_dma_buffer(req, musb); + unmap_dma_buffer(req, musb); if (request->status == 0) DBG(5, "%s done request %p, %d/%d\n", ep->end_point.name, request, @@ -335,7 +344,7 @@ static void txstate(struct musb *musb, struct musb_request *req) csr); #ifndef CONFIG_MUSB_PIO_ONLY - if (is_dma_capable() && musb_ep->dma) { + if (is_buffer_mapped(req)) { struct dma_controller *c = musb->dma_controller; size_t request_size; @@ -436,8 +445,7 @@ static void txstate(struct musb *musb, struct musb_request *req) * Unmap the dma buffer back to cpu if dma channel * programming fails */ - if (is_dma_capable() && musb_ep->dma) - unmap_dma_buffer(req, musb); + unmap_dma_buffer(req, musb); musb_write_fifo(musb_ep->hw_ep, fifo_count, (u8 *) (request->buf + request->actual)); @@ -627,7 +635,7 @@ static void rxstate(struct musb *musb, struct musb_request *req) return; } - if (is_cppi_enabled() && musb_ep->dma) { + if (is_cppi_enabled() && is_buffer_mapped(req)) { struct dma_controller *c = musb->dma_controller; struct dma_channel *channel = musb_ep->dma; @@ -658,7 +666,7 @@ static void rxstate(struct musb *musb, struct musb_request *req) len = musb_readw(epio, MUSB_RXCOUNT); if (request->actual < request->length) { #ifdef CONFIG_USB_INVENTRA_DMA - if (is_dma_capable() && musb_ep->dma) { + if (is_buffer_mapped(req)) { struct dma_controller *c; struct dma_channel *channel; int use_dma = 0; @@ -742,7 +750,7 @@ static void rxstate(struct musb *musb, struct musb_request *req) fifo_count = min_t(unsigned, len, fifo_count); #ifdef CONFIG_USB_TUSB_OMAP_DMA - if (tusb_dma_omap() && musb_ep->dma) { + if (tusb_dma_omap() && is_buffer_mapped(req)) { struct dma_controller *c = musb->dma_controller; struct dma_channel *channel = musb_ep->dma; u32 dma_addr = request->dma + request->actual; @@ -762,7 +770,7 @@ static void rxstate(struct musb *musb, struct musb_request *req) * programming fails. This buffer is mapped if the * channel allocation is successful */ - if (is_dma_capable() && musb_ep->dma) { + if (is_buffer_mapped(req)) { unmap_dma_buffer(req, musb); /* @@ -1222,10 +1230,7 @@ static int musb_gadget_queue(struct usb_ep *ep, struct usb_request *req, request->epnum = musb_ep->current_epnum; request->tx = musb_ep->is_in; - if (is_dma_capable() && musb_ep->dma) - map_dma_buffer(request, musb); - else - request->mapped = 0; + map_dma_buffer(request, musb, musb_ep); spin_lock_irqsave(&musb->lock, lockflags); diff --git a/drivers/usb/musb/musb_gadget.h b/drivers/usb/musb/musb_gadget.h index dec8dc0..a55354f 100644 --- a/drivers/usb/musb/musb_gadget.h +++ b/drivers/usb/musb/musb_gadget.h @@ -35,13 +35,19 @@ #ifndef __MUSB_GADGET_H #define __MUSB_GADGET_H +enum buffer_map_state { + UN_MAPPED = 0, + PRE_MAPPED, + MUSB_MAPPED +}; + struct musb_request { struct usb_request request; struct musb_ep *ep; struct musb *musb; u8 tx; /* endpoint direction */ u8 epnum; - u8 mapped; + enum buffer_map_state map_state; }; static inline struct musb_request *to_musb_request(struct usb_request *req) -- cgit v0.10.2 From 5f5761cb8e77f2f2321b7847eef9629e6896cd47 Mon Sep 17 00:00:00 2001 From: Mian Yousaf Kaukab Date: Tue, 4 Jan 2011 12:47:03 +0100 Subject: usb: musb: introduce api for dma code to check compatibility with usb request Gadget MUSB driver handles dma mappings in musb_gadget_queue(). Where as it is possible for dma code to reject the usb request later at ->channel_program() called from txstate()/rxstate() For example ->channel_program in tusb6010_omap.c: static int tusb_omap_dma_program(struct dma_channel *channel, u16 packet_sz, u8 rndis_mode, dma_addr_t dma_addr, u32 len) { ... if (unlikely(dma_addr & 0x1) || (len < 32) || (len > packet_sz)) return false; ... if (dma_addr & 0x2) return false; ... } In this case, usb request will be handled in PIO mode which renders dma mapping operations unnecessary. This patch adds an api to allow dma code to indicate incompatibility with usb request. Gadget musb driver call this api, if available, before dma mappings to avoid any unnecessary mapping operations. Signed-off-by: Mian Yousaf Kaukab Signed-off-by: Felipe Balbi diff --git a/drivers/usb/musb/musb_dma.h b/drivers/usb/musb/musb_dma.h index 916065b..3a97c4e 100644 --- a/drivers/usb/musb/musb_dma.h +++ b/drivers/usb/musb/musb_dma.h @@ -169,6 +169,9 @@ struct dma_controller { dma_addr_t dma_addr, u32 length); int (*channel_abort)(struct dma_channel *); + int (*is_compatible)(struct dma_channel *channel, + u16 maxpacket, + void *buf, u32 length); }; /* called after channel_program(), may indicate a fault */ diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c index 6577503..2fe3046 100644 --- a/drivers/usb/musb/musb_gadget.c +++ b/drivers/usb/musb/musb_gadget.c @@ -100,11 +100,25 @@ static inline void map_dma_buffer(struct musb_request *request, struct musb *musb, struct musb_ep *musb_ep) { + int compatible = true; + struct dma_controller *dma = musb->dma_controller; + request->map_state = UN_MAPPED; if (!is_dma_capable() || !musb_ep->dma) return; + /* Check if DMA engine can handle this request. + * DMA code must reject the USB request explicitly. + * Default behaviour is to map the request. + */ + if (dma->is_compatible) + compatible = dma->is_compatible(musb_ep->dma, + musb_ep->packet_sz, request->request.buf, + request->request.length); + if (!compatible) + return; + if (request->request.dma == DMA_ADDR_INVALID) { request->request.dma = dma_map_single( musb->controller, -- cgit v0.10.2 From 3e434a86cb21fba95d86b8d756997c235eade037 Mon Sep 17 00:00:00 2001 From: Jarkko Nikula Date: Fri, 7 Jan 2011 11:19:52 +0200 Subject: usb: ehci-omap: Show fatal probing time errors to end user There are a few error paths in ehci_hcd_omap_probe that can be triggered because of memory allocation or hw failure. Change those dev_dbg error prints to dev_err with an error code printed so that the end users are able to notice the issue. Signed-off-by: Jarkko Nikula Signed-off-by: Felipe Balbi diff --git a/drivers/usb/host/ehci-omap.c b/drivers/usb/host/ehci-omap.c index 680f2ef..f784ceb 100644 --- a/drivers/usb/host/ehci-omap.c +++ b/drivers/usb/host/ehci-omap.c @@ -796,7 +796,7 @@ static int ehci_hcd_omap_probe(struct platform_device *pdev) hcd = usb_create_hcd(&ehci_omap_hc_driver, &pdev->dev, dev_name(&pdev->dev)); if (!hcd) { - dev_dbg(&pdev->dev, "failed to create hcd with err %d\n", ret); + dev_err(&pdev->dev, "failed to create hcd with err %d\n", ret); ret = -ENOMEM; goto err_create_hcd; } @@ -864,7 +864,7 @@ static int ehci_hcd_omap_probe(struct platform_device *pdev) ret = omap_start_ehc(omap, hcd); if (ret) { - dev_dbg(&pdev->dev, "failed to start ehci\n"); + dev_err(&pdev->dev, "failed to start ehci with err %d\n", ret); goto err_start; } @@ -879,7 +879,7 @@ static int ehci_hcd_omap_probe(struct platform_device *pdev) ret = usb_add_hcd(hcd, irq, IRQF_DISABLED | IRQF_SHARED); if (ret) { - dev_dbg(&pdev->dev, "failed to add hcd with err %d\n", ret); + dev_err(&pdev->dev, "failed to add hcd with err %d\n", ret); goto err_add_hcd; } -- cgit v0.10.2 From 271c1150b4f8e1685e5a8cbf76e329ec894481da Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Bj=C3=B8rn=20Mork?= Date: Mon, 17 Jan 2011 14:19:37 +0100 Subject: USB: io_edgeport: fix the reported firmware major and minor MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The major and minor number saved in the product_info structure were copied from the address instead of the data, causing an inconsistency in the reported versions during firmware loading: usb 4-1: firmware: requesting edgeport/down.fw /usr/src/linux/drivers/usb/serial/io_edgeport.c: downloading firmware version (930) 1.16.4 [..] /usr/src/linux/drivers/usb/serial/io_edgeport.c: edge_startup - time 3 4328191260 /usr/src/linux/drivers/usb/serial/io_edgeport.c: FirmwareMajorVersion 0.0.4 This can cause some confusion whether firmware loaded successfully or not. Cc: stable@kernel.org Signed-off-by: Bjørn Mork Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/io_edgeport.c b/drivers/usb/serial/io_edgeport.c index cd769ef..3b246d9 100644 --- a/drivers/usb/serial/io_edgeport.c +++ b/drivers/usb/serial/io_edgeport.c @@ -2889,8 +2889,8 @@ static void load_application_firmware(struct edgeport_serial *edge_serial) dbg("%s %d.%d.%d", fw_info, rec->data[0], rec->data[1], build); - edge_serial->product_info.FirmwareMajorVersion = fw->data[0]; - edge_serial->product_info.FirmwareMinorVersion = fw->data[1]; + edge_serial->product_info.FirmwareMajorVersion = rec->data[0]; + edge_serial->product_info.FirmwareMinorVersion = rec->data[1]; edge_serial->product_info.FirmwareBuildNumber = cpu_to_le16(build); for (rec = ihex_next_binrec(rec); rec; -- cgit v0.10.2 From b14de3857227cd978f515247853fd15cc2425d3e Mon Sep 17 00:00:00 2001 From: Ionut Nicu Date: Tue, 28 Dec 2010 22:21:08 +0200 Subject: USB: ti_usb: fix module removal If usb_deregister() is called after usb_serial_deregister() when the device is plugged in, the following Oops occurs: [ 95.337377] BUG: unable to handle kernel NULL pointer dereference at 00000010 [ 95.338236] IP: [] klist_put+0x12/0x62 [ 95.338356] *pdpt = 000000003001a001 *pde = 0000000000000000 [ 95.338356] Oops: 0000 [#1] SMP [ 95.340499] last sysfs file: /sys/devices/pci0000:00/0000:00:1d.2/usb8/idVendor [ 95.340499] Modules linked in: ti_usb_3410_5052(-) usbserial cpufreq_ondemand acpi_cpufreq mperf iptable_nat nf_nat iptable_mangle ip6t_REJECT nf_conntrack_ipv6 nf_defrag_ipv6 ip6table_filter ip6_tables ipv6 uinput arc4 ecb iwlagn iwlcore mac80211 cfg80211 microcode pcspkr acer_wmi joydev wmi sky2 [last unloaded: scsi_wait_scan] [ 95.341908] [ 95.341908] Pid: 1532, comm: modprobe Not tainted 2.6.37-rc7+ #6 Eiger /Aspire 5930 [ 95.341908] EIP: 0060:[] EFLAGS: 00010246 CPU: 0 [ 95.341908] EIP is at klist_put+0x12/0x62 [ 95.341908] EAX: 00000000 EBX: eedc0c84 ECX: c09c21b4 EDX: 00000001 [ 95.341908] ESI: 00000000 EDI: efaa0c1c EBP: f214fe2c ESP: f214fe1c [ 95.341908] DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 [ 95.341908] Process modprobe (pid: 1532, ti=f214e000 task=efaaf080 task.ti=f214e000) [ 95.341908] Stack: [ 95.341908] f214fe24 eedc0c84 efaaf080 efaa0c1c f214fe34 c0776ba8 f214fe5c c0776c76 [ 95.341908] c09c21b4 c09c21b4 eedc0c84 efaaf080 00000000 c0634398 eafe2d1c f7b515f0 [ 95.341908] f214fe6c c0631b5c eafe2d50 eafe2d1c f214fe7c c0631ba2 eafe2d1c eafe2c00 [ 95.341908] Call Trace: [ 95.341908] [] ? klist_del+0xd/0xf [ 95.341908] [] ? klist_remove+0x48/0x74 [ 95.341908] [] ? devres_release_all+0x49/0x51 [ 95.341908] [] ? __device_release_driver+0x7b/0xa4 [ 95.341908] [] ? device_release_driver+0x1d/0x28 [ 95.341908] [] ? bus_remove_device+0x92/0xa1 [ 95.341908] [] ? device_del+0xf9/0x13e [ 95.341908] [] ? usb_serial_disconnect+0xd9/0x116 [usbserial] [ 95.341908] [] ? usb_disable_interface+0x32/0x40 [ 95.341908] [] ? usb_unbind_interface+0x48/0xfd [ 95.341908] [] ? __device_release_driver+0x62/0xa4 [ 95.341908] [] ? driver_detach+0x62/0x81 [ 95.341908] [] ? bus_remove_driver+0x8f/0xae [ 95.341908] [] ? driver_unregister+0x50/0x57 [ 95.341908] [] ? usb_deregister+0x77/0x84 [ 95.341908] [] ? ti_exit+0x26/0x28 [ti_usb_3410_5052] [ 95.341908] [] ? sys_delete_module+0x181/0x1de [ 95.341908] [] ? path_put+0x1a/0x1d [ 95.341908] [] ? audit_syscall_entry+0x116/0x138 [ 95.341908] [] ? sysenter_do_call+0x12/0x28 [ 95.341908] Code: 00 83 7d f0 00 74 09 85 f6 74 05 89 f0 ff 55 f0 8b 43 04 5a 5b 5e 5f 5d c3 55 89 e5 57 56 53 89 c3 83 ec 04 8b 30 83 e6 fe 89 f0 <8b> 7e 10 88 55 f0 e8 47 26 01 00 8a 55 f0 84 d2 74 17 f6 03 01 [ 95.341908] EIP: [] klist_put+0x12/0x62 SS:ESP 0068:f214fe1c [ 95.341908] CR2: 0000000000000010 [ 95.342357] ---[ end trace 8124d00ad871ad18 ]--- Signed-off-by: Ionut Nicu Cc: stable Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/ti_usb_3410_5052.c b/drivers/usb/serial/ti_usb_3410_5052.c index b2902f3..a910004 100644 --- a/drivers/usb/serial/ti_usb_3410_5052.c +++ b/drivers/usb/serial/ti_usb_3410_5052.c @@ -369,9 +369,9 @@ failed_1port: static void __exit ti_exit(void) { + usb_deregister(&ti_usb_driver); usb_serial_deregister(&ti_1port_device); usb_serial_deregister(&ti_2port_device); - usb_deregister(&ti_usb_driver); } -- cgit v0.10.2 From 2bd15f1f49629f110bbbbc5a2a226bec892de87c Mon Sep 17 00:00:00 2001 From: Jesper Juhl Date: Sun, 23 Jan 2011 23:08:31 +0100 Subject: USB SL811HS HCD: Fix memory leak in sl811h_urb_enqueue() In drivers/usb/host/sl811-hcd.c::sl811h_urb_enqueue(), memory is allocated with kzalloc() and assigned to 'ep'. If we leave via the 'fail' label due to 'if (ep->maxpacket > H_MAXPACKET)', then 'ep' will go out of scope without having been assigned to anything, so we'll leak the memory we allocated. This patch fixes the leak by simply calling kfree(ep); before jumping to the 'fail' label. Signed-off-by: Jesper Juhl Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/host/sl811-hcd.c b/drivers/usb/host/sl811-hcd.c index 990f06b..2e9602a 100644 --- a/drivers/usb/host/sl811-hcd.c +++ b/drivers/usb/host/sl811-hcd.c @@ -861,6 +861,7 @@ static int sl811h_urb_enqueue( DBG("dev %d ep%d maxpacket %d\n", udev->devnum, epnum, ep->maxpacket); retval = -EINVAL; + kfree(ep); goto fail; } -- cgit v0.10.2 From c25f6b1591b158f7ae3b9132367d0fa6d632e70e Mon Sep 17 00:00:00 2001 From: Nick Holloway Date: Wed, 26 Jan 2011 21:47:43 +0000 Subject: USB: Storage: Add unusual_devs entry for VTech Kidizoom This device suffers from the off-by-one error when reporting the capacity, so add entry with US_FL_FIX_CAPACITY. Signed-off-by: Nick Holloway Cc: stable Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h index 24bd5d7..79d76da 100644 --- a/drivers/usb/storage/unusual_devs.h +++ b/drivers/usb/storage/unusual_devs.h @@ -1397,6 +1397,13 @@ UNUSUAL_DEV( 0x0f19, 0x0105, 0x0100, 0x0100, USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_IGNORE_RESIDUE ), +/* Submitted by Nick Holloway */ +UNUSUAL_DEV( 0x0f88, 0x042e, 0x0100, 0x0100, + "VTech", + "Kidizoom", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, + US_FL_FIX_CAPACITY ), + /* Reported by Michael Stattmann */ UNUSUAL_DEV( 0x0fce, 0xd008, 0x0000, 0x0000, "Sony Ericsson", -- cgit v0.10.2 From 6ec2f46c4b4abf48c88c0ae7c476f347b97e1105 Mon Sep 17 00:00:00 2001 From: Jean-Christophe PLAGNIOL-VILLARD Date: Sat, 29 Jan 2011 15:32:52 +0100 Subject: USB: ftdi_sio: add ST Micro Connect Lite uart support on ST Micro Connect Lite we have 4 port Part A and B for the JTAG Port C Uart Port D for PIO Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD Cc: stable Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index 4787c0c..b1b03fb 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -100,6 +100,7 @@ struct ftdi_sio_quirk { static int ftdi_jtag_probe(struct usb_serial *serial); static int ftdi_mtxorb_hack_setup(struct usb_serial *serial); static int ftdi_NDI_device_setup(struct usb_serial *serial); +static int ftdi_stmclite_probe(struct usb_serial *serial); static void ftdi_USB_UIRT_setup(struct ftdi_private *priv); static void ftdi_HE_TIRA1_setup(struct ftdi_private *priv); @@ -123,6 +124,10 @@ static struct ftdi_sio_quirk ftdi_HE_TIRA1_quirk = { .port_probe = ftdi_HE_TIRA1_setup, }; +static struct ftdi_sio_quirk ftdi_stmclite_quirk = { + .probe = ftdi_stmclite_probe, +}; + /* * The 8U232AM has the same API as the sio except for: * - it can support MUCH higher baudrates; up to: @@ -810,6 +815,8 @@ static struct usb_device_id id_table_combined [] = { { USB_DEVICE(FTDI_VID, FTDI_DOTEC_PID) }, { USB_DEVICE(QIHARDWARE_VID, MILKYMISTONE_JTAGSERIAL_PID), .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk }, + { USB_DEVICE(ST_VID, ST_STMCLT1030_PID), + .driver_info = (kernel_ulong_t)&ftdi_stmclite_quirk }, { }, /* Optional parameter entry */ { } /* Terminating entry */ }; @@ -1709,6 +1716,25 @@ static int ftdi_jtag_probe(struct usb_serial *serial) } /* + * First and second port on STMCLiteadaptors is reserved for JTAG interface + * and the forth port for pio + */ +static int ftdi_stmclite_probe(struct usb_serial *serial) +{ + struct usb_device *udev = serial->dev; + struct usb_interface *interface = serial->interface; + + dbg("%s", __func__); + + if (interface == udev->actconfig->interface[2]) + return 0; + + dev_info(&udev->dev, "Ignoring serial port reserved for JTAG\n"); + + return -ENODEV; +} + +/* * The Matrix Orbital VK204-25-USB has an invalid IN endpoint. * We have to correct it if we want to read from it. */ diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h index ed160de..0637e21 100644 --- a/drivers/usb/serial/ftdi_sio_ids.h +++ b/drivers/usb/serial/ftdi_sio_ids.h @@ -1034,6 +1034,12 @@ #define WHT_PID 0x0004 /* Wireless Handheld Terminal */ /* + * STMicroelectonics + */ +#define ST_VID 0x0483 +#define ST_STMCLT1030_PID 0x3747 /* ST Micro Connect Lite STMCLT1030 */ + +/* * Papouch products (http://www.papouch.com/) * Submitted by Folkert van Heusden */ -- cgit v0.10.2 From 6d86d52a33cfe6338efd007cfcca895b18c1d84b Mon Sep 17 00:00:00 2001 From: Yusuke Goda Date: Mon, 31 Jan 2011 15:49:34 +0900 Subject: usb: r8a66597-udc: Fixed bufnum of Bulk Signed-off-by: Yusuke Goda Acked-by: Yoshihiro Shimoda Cc: Paul Mundt Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/gadget/r8a66597-udc.c b/drivers/usb/gadget/r8a66597-udc.c index 20d43da..0151185 100644 --- a/drivers/usb/gadget/r8a66597-udc.c +++ b/drivers/usb/gadget/r8a66597-udc.c @@ -258,7 +258,7 @@ static int pipe_buffer_setting(struct r8a66597 *r8a66597, break; case R8A66597_BULK: /* isochronous pipes may be used as bulk pipes */ - if (info->pipe > R8A66597_BASE_PIPENUM_BULK) + if (info->pipe >= R8A66597_BASE_PIPENUM_BULK) bufnum = info->pipe - R8A66597_BASE_PIPENUM_BULK; else bufnum = info->pipe - R8A66597_BASE_PIPENUM_ISOC; -- cgit v0.10.2 From d199c96d41d80a567493e12b8e96ea056a1350c1 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Mon, 31 Jan 2011 10:56:37 -0500 Subject: USB: prevent buggy hubs from crashing the USB stack If anyone comes across a high-speed hub that (by mistake or by design) claims to have no Transaction Translators, plugging a full- or low-speed device into it will cause the USB stack to crash. This patch (as1446) prevents the problem by ignoring such devices, since the kernel has no way to communicate with them. Signed-off-by: Alan Stern Tested-by: Perry Neben CC: Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 4310cc4..d041c68 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -2753,6 +2753,11 @@ hub_port_init (struct usb_hub *hub, struct usb_device *udev, int port1, udev->ttport = hdev->ttport; } else if (udev->speed != USB_SPEED_HIGH && hdev->speed == USB_SPEED_HIGH) { + if (!hub->tt.hub) { + dev_err(&udev->dev, "parent hub has no TT\n"); + retval = -EINVAL; + goto fail; + } udev->tt = &hub->tt; udev->ttport = port1; } -- cgit v0.10.2 From bf3d7d40e42a85ca73a34e1385ff34f092a384eb Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Wed, 2 Feb 2011 13:59:33 -0500 Subject: USB: fix race between root-hub resume and wakeup requests The USB core keeps track of pending resume requests for root hubs, in order to resolve races between wakeup requests and suspends. However the code that does this is subject to another race (between wakeup requests and resumes) because the WAKEUP_PENDING flag is cleared before the resume occurs, leaving a window in which another wakeup request might arrive. This patch (as1447) fixes the problem by clearing the WAKEUP_PENDING flag after the resume instead of before it. This fixes Bugzilla #24952. Signed-off-by: Alan Stern Tested-by: Paul Bender Tested-by: warpme Cc: stable [.36+] Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c index 6a95017..e935f71 100644 --- a/drivers/usb/core/hcd.c +++ b/drivers/usb/core/hcd.c @@ -1955,7 +1955,6 @@ int hcd_bus_resume(struct usb_device *rhdev, pm_message_t msg) dev_dbg(&rhdev->dev, "usb %s%s\n", (msg.event & PM_EVENT_AUTO ? "auto-" : ""), "resume"); - clear_bit(HCD_FLAG_WAKEUP_PENDING, &hcd->flags); if (!hcd->driver->bus_resume) return -ENOENT; if (hcd->state == HC_STATE_RUNNING) @@ -1963,6 +1962,7 @@ int hcd_bus_resume(struct usb_device *rhdev, pm_message_t msg) hcd->state = HC_STATE_RESUMING; status = hcd->driver->bus_resume(hcd); + clear_bit(HCD_FLAG_WAKEUP_PENDING, &hcd->flags); if (status == 0) { /* TRSMRCY = 10 msec */ msleep(10); -- cgit v0.10.2 From 28fe2eb0162a1d23370dd99ff7d0e35632b1ee91 Mon Sep 17 00:00:00 2001 From: Michael Williamson Date: Thu, 27 Jan 2011 18:36:19 -0600 Subject: USB: ftdi_sio: Add VID=0x0647, PID=0x0100 for Acton Research spectrograph Add the USB Vendor ID and Product ID for a Acton Research Corp. spectrograph device with a FTDI chip for serial I/O. Signed-off-by: Michael H Williamson Cc: stable Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index b1b03fb..f349a36 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -621,6 +621,7 @@ static struct usb_device_id id_table_combined [] = { { USB_DEVICE(FTDI_VID, FTDI_OCEANIC_PID) }, { USB_DEVICE(TTI_VID, TTI_QL355P_PID) }, { USB_DEVICE(FTDI_VID, FTDI_RM_CANVIEW_PID) }, + { USB_DEVICE(ACTON_VID, ACTON_SPECTRAPRO_PID) }, { USB_DEVICE(CONTEC_VID, CONTEC_COM1USBH_PID) }, { USB_DEVICE(BANDB_VID, BANDB_USOTL4_PID) }, { USB_DEVICE(BANDB_VID, BANDB_USTL4_PID) }, diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h index 0637e21..117e8e6 100644 --- a/drivers/usb/serial/ftdi_sio_ids.h +++ b/drivers/usb/serial/ftdi_sio_ids.h @@ -518,6 +518,12 @@ #define RATOC_PRODUCT_ID_USB60F 0xb020 /* + * Acton Research Corp. + */ +#define ACTON_VID 0x0647 /* Vendor ID */ +#define ACTON_SPECTRAPRO_PID 0x0100 + +/* * Contec products (http://www.contec.com) * Submitted by Daniel Sangorrin */ -- cgit v0.10.2 From 3ea3c9b5a8464ec8223125f95e5dddb3bfd02a39 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Tue, 25 Jan 2011 13:07:04 -0500 Subject: USB: usb-storage: unusual_devs entry for Coby MP3 player This patch (as1444) adds an unusual_devs entry for an MP3 player from Coby electronics. The device has two nasty bugs. Signed-off-by: Alan Stern Tested-by: Jasper Mackenzie Cc: stable Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h index 79d76da..c1602b8 100644 --- a/drivers/usb/storage/unusual_devs.h +++ b/drivers/usb/storage/unusual_devs.h @@ -1897,6 +1897,13 @@ UNUSUAL_DEV( 0x1e68, 0x001b, 0x0000, 0x0000, USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_IGNORE_RESIDUE | US_FL_SANE_SENSE ), +/* Reported by Jasper Mackenzie */ +UNUSUAL_DEV( 0x1e74, 0x4621, 0x0000, 0x0000, + "Coby Electronics", + "MP3 Player", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, + US_FL_BULK_IGNORE_TAG | US_FL_MAX_SECTORS_64 ), + UNUSUAL_DEV( 0x2116, 0x0320, 0x0001, 0x0001, "ST", "2A", -- cgit v0.10.2 From 148fc55fd0449683a1d15bf219ad8d8b6fa17545 Mon Sep 17 00:00:00 2001 From: Yin Kangkai Date: Fri, 28 Jan 2011 12:04:35 +0800 Subject: USB: EHCI: fix scheduling while atomic during suspend There is a msleep with spin lock held during ehci pci suspend, which will cause kernel BUG: scheduling while atomic. Fix that. [ 184.139620] BUG: scheduling while atomic: kworker/u:11/416/0x00000002 [ 184.139632] 4 locks held by kworker/u:11/416: [ 184.139640] #0: (events_unbound){+.+.+.}, at: [] process_one_work+0x1b3/0x4cb [ 184.139669] #1: ((&entry->work)){+.+.+.}, at: [] process_one_work+0x1b3/0x4cb [ 184.139686] #2: (&__lockdep_no_validate__){+.+.+.}, at: [] __device_suspend+0x2c/0x154 [ 184.139706] #3: (&(&ehci->lock)->rlock){-.-...}, at: [] ehci_pci_suspend+0x35/0x7b [ 184.139725] Modules linked in: serio_raw pegasus joydev mrst_gfx(C) battery [ 184.139748] irq event stamp: 52 [ 184.139753] hardirqs last enabled at (51): [] mutex_lock_nested+0x258/0x293 [ 184.139766] hardirqs last disabled at (52): [] _raw_spin_lock_irqsave+0xf/0x3e [ 184.139777] softirqs last enabled at (0): [] copy_process+0x3d2/0x109d [ 184.139789] softirqs last disabled at (0): [< (null)>] (null) [ 184.139802] Pid: 416, comm: kworker/u:11 Tainted: G C 2.6.37-6.3-adaptation-oaktrail #37 [ 184.139809] Call Trace: [ 184.139820] [] __schedule_bug+0x5e/0x65 [ 184.139829] [] schedule+0xac/0xc4c [ 184.139840] [] ? string+0x37/0x8b [ 184.139853] [] ? lock_timer_base+0x1f/0x3e [ 184.139863] [] ? _raw_spin_lock_irqsave+0x35/0x3e [ 184.139876] [] ? trace_hardirqs_off+0xb/0xd [ 184.139885] [] schedule_timeout+0x283/0x2d9 [ 184.139896] [] ? process_timeout+0x0/0xa [ 184.139906] [] schedule_timeout_uninterruptible+0x15/0x17 [ 184.139916] [] msleep+0x10/0x16 [ 184.139926] [] ehci_adjust_port_wakeup_flags+0x69/0xf6 [ 184.139937] [] ehci_pci_suspend+0x48/0x7b [ 184.139946] [] suspend_common+0x52/0xbb [ 184.139956] [] hcd_pci_suspend+0x26/0x28 [ 184.139967] [] pci_pm_suspend+0x5f/0xd0 [ 184.139976] [] pm_op+0x5d/0xf0 [ 184.139986] [] __device_suspend+0xf5/0x154 [ 184.139996] [] async_suspend+0x16/0x3a [ 184.140006] [] async_run_entry_fn+0x89/0x111 [ 184.140016] [] process_one_work+0x295/0x4cb [ 184.140026] [] ? async_run_entry_fn+0x0/0x111 [ 184.140036] [] worker_thread+0x17f/0x298 [ 184.140045] [] ? worker_thread+0x0/0x298 [ 184.140055] [] kthread+0x64/0x69 [ 184.140064] [] ? kthread+0x0/0x69 [ 184.140075] [] kernel_thread_helper+0x6/0x1a Signed-off-by: Yin Kangkai Acked-by: Alan Stern CC: David Brownell CC: stable@kernel.org Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/host/ehci-au1xxx.c b/drivers/usb/host/ehci-au1xxx.c index 2baf8a8..a869e3c 100644 --- a/drivers/usb/host/ehci-au1xxx.c +++ b/drivers/usb/host/ehci-au1xxx.c @@ -227,8 +227,8 @@ static int ehci_hcd_au1xxx_drv_suspend(struct device *dev) * mark HW unaccessible. The PM and USB cores make sure that * the root hub is either suspended or stopped. */ - spin_lock_irqsave(&ehci->lock, flags); ehci_prepare_ports_for_controller_suspend(ehci, device_may_wakeup(dev)); + spin_lock_irqsave(&ehci->lock, flags); ehci_writel(ehci, 0, &ehci->regs->intr_enable); (void)ehci_readl(ehci, &ehci->regs->intr_enable); diff --git a/drivers/usb/host/ehci-hub.c b/drivers/usb/host/ehci-hub.c index 796ea0c..8a515f0 100644 --- a/drivers/usb/host/ehci-hub.c +++ b/drivers/usb/host/ehci-hub.c @@ -111,6 +111,7 @@ static void ehci_adjust_port_wakeup_flags(struct ehci_hcd *ehci, { int port; u32 temp; + unsigned long flags; /* If remote wakeup is enabled for the root hub but disabled * for the controller, we must adjust all the port wakeup flags @@ -120,6 +121,8 @@ static void ehci_adjust_port_wakeup_flags(struct ehci_hcd *ehci, if (!ehci_to_hcd(ehci)->self.root_hub->do_remote_wakeup || do_wakeup) return; + spin_lock_irqsave(&ehci->lock, flags); + /* clear phy low-power mode before changing wakeup flags */ if (ehci->has_hostpc) { port = HCS_N_PORTS(ehci->hcs_params); @@ -131,7 +134,9 @@ static void ehci_adjust_port_wakeup_flags(struct ehci_hcd *ehci, temp = ehci_readl(ehci, hostpc_reg); ehci_writel(ehci, temp & ~HOSTPC_PHCD, hostpc_reg); } + spin_unlock_irqrestore(&ehci->lock, flags); msleep(5); + spin_lock_irqsave(&ehci->lock, flags); } port = HCS_N_PORTS(ehci->hcs_params); @@ -170,6 +175,8 @@ static void ehci_adjust_port_wakeup_flags(struct ehci_hcd *ehci, /* Does the root hub have a port wakeup pending? */ if (!suspending && (ehci_readl(ehci, &ehci->regs->status) & STS_PCD)) usb_hcd_resume_root_hub(ehci_to_hcd(ehci)); + + spin_unlock_irqrestore(&ehci->lock, flags); } static int ehci_bus_suspend (struct usb_hcd *hcd) diff --git a/drivers/usb/host/ehci-pci.c b/drivers/usb/host/ehci-pci.c index bed07d4..07bb982 100644 --- a/drivers/usb/host/ehci-pci.c +++ b/drivers/usb/host/ehci-pci.c @@ -367,8 +367,8 @@ static int ehci_pci_suspend(struct usb_hcd *hcd, bool do_wakeup) * mark HW unaccessible. The PM and USB cores make sure that * the root hub is either suspended or stopped. */ - spin_lock_irqsave (&ehci->lock, flags); ehci_prepare_ports_for_controller_suspend(ehci, do_wakeup); + spin_lock_irqsave (&ehci->lock, flags); ehci_writel(ehci, 0, &ehci->regs->intr_enable); (void)ehci_readl(ehci, &ehci->regs->intr_enable); -- cgit v0.10.2 From 8cf28f1f4de58c70e6af657bb46ca8f304c073d4 Mon Sep 17 00:00:00 2001 From: Pavankumar Kondeti Date: Fri, 4 Feb 2011 10:08:18 +0530 Subject: USB: Fix trout build failure with ci13xxx_msm gadget This patch fixes the below compilation errors. CC drivers/usb/gadget/ci13xxx_msm.o CC net/mac80211/led.o drivers/usb/gadget/ci13xxx_msm.c: In function 'ci13xxx_msm_notify_event': drivers/usb/gadget/ci13xxx_msm.c:42: error: 'USB_AHBBURST' undeclared (first use in this function) drivers/usb/gadget/ci13xxx_msm.c:42: error: (Each undeclared identifier is reported only once drivers/usb/gadget/ci13xxx_msm.c:42: error: for each function it appears in.) drivers/usb/gadget/ci13xxx_msm.c:43: error: 'USB_AHBMODE' undeclared (first use in this function) make[4]: *** [drivers/usb/gadget/ci13xxx_msm.o] Error 1 make[3]: *** [drivers/usb/gadget] Error 2 MSM USB driver is not supported on boards like trout (MSM7201) which has an external PHY. Signed-off-by: Pavankumar Kondeti Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig index 06bb9d4..d500996 100644 --- a/drivers/usb/gadget/Kconfig +++ b/drivers/usb/gadget/Kconfig @@ -546,6 +546,8 @@ config USB_GADGET_CI13XXX_MSM ci13xxx_udc core. This driver depends on OTG driver for PHY initialization, clock management, powering up VBUS, and power management. + This driver is not supported on boards like trout which + has an external PHY. Say "y" to link the driver statically, or "m" to build a dynamically linked module called "ci13xxx_msm" and force all diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig index 24046c0..0e6afa2 100644 --- a/drivers/usb/host/Kconfig +++ b/drivers/usb/host/Kconfig @@ -151,6 +151,8 @@ config USB_EHCI_MSM Qualcomm chipsets. Root Hub has inbuilt TT. This driver depends on OTG driver for PHY initialization, clock management, powering up VBUS, and power management. + This driver is not supported on boards like trout which + has an external PHY. config USB_EHCI_HCD_PPC_OF bool "EHCI support for PPC USB controller on OF platform bus" diff --git a/drivers/usb/otg/Kconfig b/drivers/usb/otg/Kconfig index 9fb875d..9ffc823 100644 --- a/drivers/usb/otg/Kconfig +++ b/drivers/usb/otg/Kconfig @@ -103,6 +103,8 @@ config USB_MSM_OTG_72K required after resetting the hardware and power management. This driver is required even for peripheral only or host only mode configurations. + This driver is not supported on boards like trout which + has an external PHY. config AB8500_USB tristate "AB8500 USB Transceiver Driver" diff --git a/include/linux/usb/msm_hsusb_hw.h b/include/linux/usb/msm_hsusb_hw.h index b92e173..7d1babb 100644 --- a/include/linux/usb/msm_hsusb_hw.h +++ b/include/linux/usb/msm_hsusb_hw.h @@ -16,12 +16,8 @@ #ifndef __LINUX_USB_GADGET_MSM72K_UDC_H__ #define __LINUX_USB_GADGET_MSM72K_UDC_H__ -#ifdef CONFIG_ARCH_MSM7X00A -#define USB_SBUSCFG (MSM_USB_BASE + 0x0090) -#else #define USB_AHBBURST (MSM_USB_BASE + 0x0090) #define USB_AHBMODE (MSM_USB_BASE + 0x0098) -#endif #define USB_CAPLENGTH (MSM_USB_BASE + 0x0100) /* 8 bit */ #define USB_USBCMD (MSM_USB_BASE + 0x0140) -- cgit v0.10.2 From a283c03a3a7a8cd3f8836ffd1b1d6cc8f778492c Mon Sep 17 00:00:00 2001 From: Jesper Juhl Date: Sat, 29 Jan 2011 02:26:51 +0100 Subject: USB, Mass Storage, composite, gadget: Fix build failure and memset of a struct MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Trying to compile drivers/usb/gadget/f_mass_storage.o currently fails and spews a ton of warnings : CC drivers/usb/gadget/f_mass_storage.o drivers/usb/gadget/f_mass_storage.c:436:22: error: field ‘function’ has incomplete type drivers/usb/gadget/f_mass_storage.c: In function ‘fsg_from_func’: drivers/usb/gadget/f_mass_storage.c:466:9: warning: type defaults to ‘int’ in declaration of ‘__mptr’ drivers/usb/gadget/f_mass_storage.c:466:9: warning: initialization from incompatible pointer type drivers/usb/gadget/f_mass_storage.c: At top level: drivers/usb/gadget/f_mass_storage.c:2743:15: warning: ‘struct usb_composite_dev’ declared inside parameter list drivers/usb/gadget/f_mass_storage.c:2743:15: warning: its scope is only this definition or declaration, which is probably not what you want drivers/usb/gadget/f_mass_storage.c: In function ‘fsg_common_init’: drivers/usb/gadget/f_mass_storage.c:2745:34: error: dereferencing pointer to incomplete type drivers/usb/gadget/f_mass_storage.c:2775:23: error: dereferencing pointer to incomplete type drivers/usb/gadget/f_mass_storage.c:2779:3: error: implicit declaration of function ‘usb_string_id’ drivers/usb/gadget/f_mass_storage.c: At top level: drivers/usb/gadget/f_mass_storage.c:2984:60: warning: ‘struct usb_configuration’ declared inside parameter list drivers/usb/gadget/f_mass_storage.c:3003:57: warning: ‘struct usb_configuration’ declared inside parameter list drivers/usb/gadget/f_mass_storage.c: In function ‘fsg_bind’: drivers/usb/gadget/f_mass_storage.c:3006:31: error: dereferencing pointer to incomplete type drivers/usb/gadget/f_mass_storage.c:3013:2: error: implicit declaration of function ‘usb_interface_id’ drivers/usb/gadget/f_mass_storage.c:3033:3: error: dereferencing pointer to incomplete type drivers/usb/gadget/f_mass_storage.c:3034:6: error: dereferencing pointer to incomplete type drivers/usb/gadget/f_mass_storage.c:3043:4: error: dereferencing pointer to incomplete type drivers/usb/gadget/f_mass_storage.c:3044:7: error: dereferencing pointer to incomplete type drivers/usb/gadget/f_mass_storage.c:3045:26: error: dereferencing pointer to incomplete type drivers/usb/gadget/f_mass_storage.c: At top level: drivers/usb/gadget/f_mass_storage.c:3067:14: warning: ‘struct usb_configuration’ declared inside parameter list drivers/usb/gadget/f_mass_storage.c:3067:14: warning: ‘struct usb_composite_dev’ declared inside parameter list drivers/usb/gadget/f_mass_storage.c: In function ‘fsg_bind_config’: drivers/usb/gadget/f_mass_storage.c:3093:2: error: implicit declaration of function ‘usb_add_function’ drivers/usb/gadget/f_mass_storage.c: At top level: drivers/usb/gadget/f_mass_storage.c:3103:9: warning: ‘struct usb_configuration’ declared inside parameter list drivers/usb/gadget/f_mass_storage.c:3103:9: warning: ‘struct usb_composite_dev’ declared inside parameter list drivers/usb/gadget/f_mass_storage.c: In function ‘fsg_add’: drivers/usb/gadget/f_mass_storage.c:3105:2: warning: passing argument 1 of ‘fsg_bind_config’ from incompatible pointer type drivers/usb/gadget/f_mass_storage.c:3065:12: note: expected ‘struct usb_composite_dev *’ but argument is of type ‘struct usb_composite_dev *’ drivers/usb/gadget/f_mass_storage.c:3105:2: warning: passing argument 2 of ‘fsg_bind_config’ from incompatible pointer type drivers/usb/gadget/f_mass_storage.c:3065:12: note: expected ‘struct usb_configuration *’ but argument is of type ‘struct usb_configuration *’ drivers/usb/gadget/f_mass_storage.c: At top level: drivers/usb/gadget/f_mass_storage.c:3190:23: warning: ‘struct usb_composite_dev’ declared inside parameter list drivers/usb/gadget/f_mass_storage.c:3195:23: warning: ‘struct usb_composite_dev’ declared inside parameter list drivers/usb/gadget/f_mass_storage.c:3193:1: error: conflicting types for ‘fsg_common_from_params’ drivers/usb/gadget/f_mass_storage.c:3188:1: note: previous declaration of ‘fsg_common_from_params’ was here drivers/usb/gadget/f_mass_storage.c: In function ‘fsg_common_from_params’: drivers/usb/gadget/f_mass_storage.c:3199:2: warning: passing argument 2 of ‘fsg_common_init’ from incompatible pointer type drivers/usb/gadget/f_mass_storage.c:2741:27: note: expected ‘struct usb_composite_dev *’ but argument is of type ‘struct usb_composite_dev *’ make[1]: *** [drivers/usb/gadget/f_mass_storage.o] Error 1 make: *** [drivers/usb/gadget/f_mass_storage.o] Error 2 This is due to the missing include of linux/usb/composite.h - this patch adds the missing include. In addition there's also a problem in fsg_common_init() where we memset 'common', but we use the size of a pointer to 'struct fsg_common' as the size argument to memset(), not the actual size of the struct. This patch fixes the sizeof so we zero the entire struct as intended. Signed-off-by: Jesper Juhl Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/gadget/f_mass_storage.c b/drivers/usb/gadget/f_mass_storage.c index b5dbb23..6d8e533 100644 --- a/drivers/usb/gadget/f_mass_storage.c +++ b/drivers/usb/gadget/f_mass_storage.c @@ -293,6 +293,7 @@ #include #include +#include #include "gadget_chips.h" @@ -2763,7 +2764,7 @@ static struct fsg_common *fsg_common_init(struct fsg_common *common, return ERR_PTR(-ENOMEM); common->free_storage_on_release = 1; } else { - memset(common, 0, sizeof common); + memset(common, 0, sizeof *common); common->free_storage_on_release = 0; } -- cgit v0.10.2 From 721d92fc6373dee15846216f9d178ec240ec0fd7 Mon Sep 17 00:00:00 2001 From: Arvid Ephraim Picciani Date: Tue, 25 Jan 2011 15:58:40 +0100 Subject: USB: cdc-acm: Adding second ACM channel support for Nokia N8 This adds the N8 to the list of devices in cdc-acm, in order to get the secondary ACM device exposed. In the spirit of: http://kerneltrap.org/mailarchive/linux-usb/2010/9/4/6264554 Signed-off-by: Arvid Ephraim Picciani Cc: stable Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c index d6ede98..4ab49d4 100644 --- a/drivers/usb/class/cdc-acm.c +++ b/drivers/usb/class/cdc-acm.c @@ -1607,6 +1607,7 @@ static const struct usb_device_id acm_ids[] = { { NOKIA_PCSUITE_ACM_INFO(0x0154), }, /* Nokia 5800 XpressMusic */ { NOKIA_PCSUITE_ACM_INFO(0x04ce), }, /* Nokia E90 */ { NOKIA_PCSUITE_ACM_INFO(0x01d4), }, /* Nokia E55 */ + { NOKIA_PCSUITE_ACM_INFO(0x0302), }, /* Nokia N8 */ { SAMSUNG_PCSUITE_ACM_INFO(0x6651), }, /* Samsung GTi8510 (INNOV8) */ /* NOTE: non-Nokia COMM/ACM/0xff is likely MSFT RNDIS... NOT a modem! */ -- cgit v0.10.2