From e5615112807c27dd256f0bd8fc8b1f6f5e1b90af Mon Sep 17 00:00:00 2001 From: Grazvydas Ignotas Date: Sun, 10 Mar 2013 02:48:55 +0200 Subject: usb: musb: core: honour initial transceiver state As the usb transceiver driver usually starts first, it should already have default_a variable set according to ID pin state, so don't override it. In case default_a was not changed by trasceiver, it will default to 0 and this code will work as before. Signed-off-by: Grazvydas Ignotas Signed-off-by: Felipe Balbi diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c index 6bd8792..5fbabc0 100644 --- a/drivers/usb/musb/musb_core.c +++ b/drivers/usb/musb/musb_core.c @@ -1952,9 +1952,13 @@ musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl) musb_write_ulpi_buscontrol(musb->mregs, busctl); } - MUSB_DEV_MODE(musb); - musb->xceiv->otg->default_a = 0; - musb->xceiv->state = OTG_STATE_B_IDLE; + if (musb->xceiv->otg->default_a) { + MUSB_HST_MODE(musb); + musb->xceiv->state = OTG_STATE_A_IDLE; + } else { + MUSB_DEV_MODE(musb); + musb->xceiv->state = OTG_STATE_B_IDLE; + } status = musb_gadget_setup(musb); -- cgit v0.10.2