From f8c0e057b4898055b24b44d03b837a15d8b93b37 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Mon, 15 Sep 2014 18:40:45 +0200 Subject: USB: serial: remove zte_ev driver The zte_ev driver is based on code (once) distributed by ZTE that still appears to originally have been reverse-engineered and bolted onto the generic driver. A closer analysis of the zte_ev setup code reveals that it consists of standard CDC requests (SET/GET_LINE_CODING and SET_CONTROL_LINE_STATE) but unfortunately fails to get some of those right. In particular, as reported by Lei Liu, it fails to lower DTR/RTS on close. It also appears that the control requests lack the interface argument. Since line control is already handled properly by the option driver, and the SET/GET_LINE_CODING requests appears to be redundant (amounts to a SET 9600 8N1) let's remove the redundant zte_ev driver. Also move the remaining ZTE PIDs to the generic option modem driver. Reported-by: Lei Liu Signed-off-by: Johan Hovold diff --git a/drivers/usb/serial/Kconfig b/drivers/usb/serial/Kconfig index c3119eb..a69f7cd 100644 --- a/drivers/usb/serial/Kconfig +++ b/drivers/usb/serial/Kconfig @@ -684,14 +684,6 @@ config USB_SERIAL_WISHBONE To compile this driver as a module, choose M here: the module will be called wishbone-serial. -config USB_SERIAL_ZTE - tristate "ZTE USB serial driver" - help - Say Y here if you want to use a ZTE USB to serial device. - - To compile this driver as a module, choose M here: the - module will be called zte. - config USB_SERIAL_SSU100 tristate "USB Quatech SSU-100 Single Port Serial Driver" help diff --git a/drivers/usb/serial/Makefile b/drivers/usb/serial/Makefile index bfdafd3..349d9df 100644 --- a/drivers/usb/serial/Makefile +++ b/drivers/usb/serial/Makefile @@ -60,4 +60,3 @@ obj-$(CONFIG_USB_SERIAL_WISHBONE) += wishbone-serial.o obj-$(CONFIG_USB_SERIAL_WHITEHEAT) += whiteheat.o obj-$(CONFIG_USB_SERIAL_XIRCOM) += keyspan_pda.o obj-$(CONFIG_USB_SERIAL_XSENS_MT) += xsens_mt.o -obj-$(CONFIG_USB_SERIAL_ZTE) += zte_ev.o diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 54a8120..d1a3f60 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -276,6 +276,7 @@ static void option_instat_callback(struct urb *urb); #define ZTE_PRODUCT_MF628 0x0015 #define ZTE_PRODUCT_MF626 0x0031 #define ZTE_PRODUCT_AC2726 0xfff1 +#define ZTE_PRODUCT_MG880 0xfffd #define ZTE_PRODUCT_CDMA_TECH 0xfffe #define ZTE_PRODUCT_AC8710T 0xffff #define ZTE_PRODUCT_MC2718 0xffe8 @@ -1560,7 +1561,15 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff92, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff93, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff94, 0xff, 0xff, 0xff) }, - + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffec, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffee, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xfff6, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xfff7, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xfff8, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xfff9, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xfffb, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xfffc, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_MG880, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_CDMA_TECH, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_AC2726, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_AC8710T, 0xff, 0xff, 0xff) }, diff --git a/drivers/usb/serial/zte_ev.c b/drivers/usb/serial/zte_ev.c deleted file mode 100644 index c9bb107..0000000 --- a/drivers/usb/serial/zte_ev.c +++ /dev/null @@ -1,305 +0,0 @@ -/* - * ZTE_EV USB serial driver - * - * Copyright (C) 2012 Greg Kroah-Hartman - * Copyright (C) 2012 Linux Foundation - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This driver is based on code found in a ZTE_ENV patch that modified - * the usb-serial generic driver. Comments were left in that I think - * show the commands used to talk to the device, but I am not sure. - */ -#include -#include -#include -#include -#include -#include -#include - -#define MAX_SETUP_DATA_SIZE 32 - -static void debug_data(struct device *dev, const char *function, int len, - const unsigned char *data, int result) -{ - dev_dbg(dev, "result = %d\n", result); - if (result == len) - dev_dbg(dev, "%s - length = %d, data = %*ph\n", function, - len, len, data); -} - -static int zte_ev_usb_serial_open(struct tty_struct *tty, - struct usb_serial_port *port) -{ - struct usb_device *udev = port->serial->dev; - struct device *dev = &port->dev; - int result = 0; - int len; - unsigned char *buf; - - buf = kmalloc(MAX_SETUP_DATA_SIZE, GFP_KERNEL); - if (!buf) - return -ENOMEM; - - /* send 1st ctl cmd(CTL 21 22 01 00 00 00 00 00) */ - len = 0; - result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), - 0x22, 0x21, - 0x0001, 0x0000, NULL, len, - USB_CTRL_GET_TIMEOUT); - dev_dbg(dev, "result = %d\n", result); - - /* send 2st cmd and receive data */ - /* - * 16.0 CTL a1 21 00 00 00 00 07 00 CLASS 25.1.0(5) - * 16.0 DI 00 96 00 00 00 00 08 - */ - len = 0x0007; - result = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), - 0x21, 0xa1, - 0x0000, 0x0000, buf, len, - USB_CTRL_GET_TIMEOUT); - debug_data(dev, __func__, len, buf, result); - - /* send 3rd cmd */ - /* - * 16.0 CTL 21 20 00 00 00 00 07 00 CLASS 30.1.0 - * 16.0 DO 80 25 00 00 00 00 08 .%..... 30.2.0 - */ - len = 0x0007; - buf[0] = 0x80; - buf[1] = 0x25; - buf[2] = 0x00; - buf[3] = 0x00; - buf[4] = 0x00; - buf[5] = 0x00; - buf[6] = 0x08; - result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), - 0x20, 0x21, - 0x0000, 0x0000, buf, len, - USB_CTRL_GET_TIMEOUT); - debug_data(dev, __func__, len, buf, result); - - /* send 4th cmd */ - /* - * 16.0 CTL 21 22 03 00 00 00 00 00 - */ - len = 0; - result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), - 0x22, 0x21, - 0x0003, 0x0000, NULL, len, - USB_CTRL_GET_TIMEOUT); - dev_dbg(dev, "result = %d\n", result); - - /* send 5th cmd */ - /* - * 16.0 CTL a1 21 00 00 00 00 07 00 CLASS 33.1.0 - * 16.0 DI 80 25 00 00 00 00 08 - */ - len = 0x0007; - result = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), - 0x21, 0xa1, - 0x0000, 0x0000, buf, len, - USB_CTRL_GET_TIMEOUT); - debug_data(dev, __func__, len, buf, result); - - /* send 6th cmd */ - /* - * 16.0 CTL 21 20 00 00 00 00 07 00 CLASS 34.1.0 - * 16.0 DO 80 25 00 00 00 00 08 - */ - len = 0x0007; - buf[0] = 0x80; - buf[1] = 0x25; - buf[2] = 0x00; - buf[3] = 0x00; - buf[4] = 0x00; - buf[5] = 0x00; - buf[6] = 0x08; - result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), - 0x20, 0x21, - 0x0000, 0x0000, buf, len, - USB_CTRL_GET_TIMEOUT); - debug_data(dev, __func__, len, buf, result); - kfree(buf); - - return usb_serial_generic_open(tty, port); -} - -/* - * CTL 21 22 02 00 00 00 00 00 CLASS 338.1.0 - * - * 16.1 DI a1 20 00 00 00 00 02 00 02 00 . ........ 340.1.0 - * 16.0 CTL 21 22 03 00 00 00 00 00 CLASS 341.1.0 - * - * 16.0 CTL a1 21 00 00 00 00 07 00 CLASS 346.1.0(3) - * 16.0 DI 00 08 07 00 00 00 08 ....... 346.2.0 - * - * 16.0 CTL 21 20 00 00 00 00 07 00 CLASS 349.1.0 - * 16.0 DO 00 c2 01 00 00 00 08 ....... 349.2.0 - * - * 16.0 CTL 21 22 03 00 00 00 00 00 CLASS 350.1.0(2) - * - * 16.0 CTL a1 21 00 00 00 00 07 00 CLASS 352.1.0 - * 16.0 DI 00 c2 01 00 00 00 08 ....... 352.2.0 - * - * 16.1 DI a1 20 00 00 00 00 02 00 02 00 . ........ 353.1.0 - * - * 16.0 CTL 21 20 00 00 00 00 07 00 CLASS 354.1.0 - * 16.0 DO 00 c2 01 00 00 00 08 ....... 354.2.0 - * - * 16.0 CTL 21 22 03 00 00 00 00 00 -*/ - -static void zte_ev_usb_serial_close(struct usb_serial_port *port) -{ - struct usb_device *udev = port->serial->dev; - struct device *dev = &port->dev; - int result = 0; - int len; - unsigned char *buf; - - buf = kmalloc(MAX_SETUP_DATA_SIZE, GFP_KERNEL); - if (!buf) - return; - - /* send 1st ctl cmd(CTL 21 22 02 00 00 00 00 00) */ - len = 0; - result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), - 0x22, 0x21, - 0x0002, 0x0000, NULL, len, - USB_CTRL_GET_TIMEOUT); - dev_dbg(dev, "result = %d\n", result); - - /* send 2st ctl cmd(CTL 21 22 03 00 00 00 00 00 ) */ - len = 0; - result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), - 0x22, 0x21, - 0x0003, 0x0000, NULL, len, - USB_CTRL_GET_TIMEOUT); - dev_dbg(dev, "result = %d\n", result); - - /* send 3st cmd and recieve data */ - /* - * 16.0 CTL a1 21 00 00 00 00 07 00 CLASS 25.1.0(5) - * 16.0 DI 00 08 07 00 00 00 08 - */ - len = 0x0007; - result = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), - 0x21, 0xa1, - 0x0000, 0x0000, buf, len, - USB_CTRL_GET_TIMEOUT); - debug_data(dev, __func__, len, buf, result); - - /* send 4th cmd */ - /* - * 16.0 CTL 21 20 00 00 00 00 07 00 CLASS 30.1.0 - * 16.0 DO 00 c2 01 00 00 00 08 .%..... 30.2.0 - */ - len = 0x0007; - buf[0] = 0x00; - buf[1] = 0xc2; - buf[2] = 0x01; - buf[3] = 0x00; - buf[4] = 0x00; - buf[5] = 0x00; - buf[6] = 0x08; - result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), - 0x20, 0x21, - 0x0000, 0x0000, buf, len, - USB_CTRL_GET_TIMEOUT); - debug_data(dev, __func__, len, buf, result); - - /* send 5th cmd */ - /* - * 16.0 CTL 21 22 03 00 00 00 00 00 - */ - len = 0; - result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), - 0x22, 0x21, - 0x0003, 0x0000, NULL, len, - USB_CTRL_GET_TIMEOUT); - dev_dbg(dev, "result = %d\n", result); - - /* send 6th cmd */ - /* - * 16.0 CTL a1 21 00 00 00 00 07 00 CLASS 33.1.0 - * 16.0 DI 00 c2 01 00 00 00 08 - */ - len = 0x0007; - result = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), - 0x21, 0xa1, - 0x0000, 0x0000, buf, len, - USB_CTRL_GET_TIMEOUT); - debug_data(dev, __func__, len, buf, result); - - /* send 7th cmd */ - /* - * 16.0 CTL 21 20 00 00 00 00 07 00 CLASS 354.1.0 - * 16.0 DO 00 c2 01 00 00 00 08 ....... 354.2.0 - */ - len = 0x0007; - buf[0] = 0x00; - buf[1] = 0xc2; - buf[2] = 0x01; - buf[3] = 0x00; - buf[4] = 0x00; - buf[5] = 0x00; - buf[6] = 0x08; - result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), - 0x20, 0x21, - 0x0000, 0x0000, buf, len, - USB_CTRL_GET_TIMEOUT); - debug_data(dev, __func__, len, buf, result); - - /* send 8th cmd */ - /* - * 16.0 CTL 21 22 03 00 00 00 00 00 - */ - len = 0; - result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), - 0x22, 0x21, - 0x0003, 0x0000, NULL, len, - USB_CTRL_GET_TIMEOUT); - dev_dbg(dev, "result = %d\n", result); - - kfree(buf); - - usb_serial_generic_close(port); -} - -static const struct usb_device_id id_table[] = { - { USB_DEVICE(0x19d2, 0xffec) }, - { USB_DEVICE(0x19d2, 0xffee) }, - { USB_DEVICE(0x19d2, 0xfff6) }, - { USB_DEVICE(0x19d2, 0xfff7) }, - { USB_DEVICE(0x19d2, 0xfff8) }, - { USB_DEVICE(0x19d2, 0xfff9) }, - { USB_DEVICE(0x19d2, 0xfffb) }, - { USB_DEVICE(0x19d2, 0xfffc) }, - /* MG880 */ - { USB_DEVICE(0x19d2, 0xfffd) }, - { }, -}; -MODULE_DEVICE_TABLE(usb, id_table); - -static struct usb_serial_driver zio_device = { - .driver = { - .owner = THIS_MODULE, - .name = "zte_ev", - }, - .id_table = id_table, - .num_ports = 1, - .open = zte_ev_usb_serial_open, - .close = zte_ev_usb_serial_close, -}; - -static struct usb_serial_driver * const serial_drivers[] = { - &zio_device, NULL -}; - -module_usb_serial_driver(serial_drivers, id_table); -MODULE_LICENSE("GPL v2"); -- cgit v0.10.2