From 6e7eb170fda0ee14a2cb75a70825a2328fa1f9b8 Mon Sep 17 00:00:00 2001 From: Jingoo Han Date: Fri, 23 Dec 2011 11:19:36 +0900 Subject: ARM: EXYNOS: Add USB OHCI device Signed-off-by: Jingoo Han Signed-off-by: Kukjin Kim diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig index 724ec0f..a1d1a06 100644 --- a/arch/arm/mach-exynos/Kconfig +++ b/arch/arm/mach-exynos/Kconfig @@ -82,6 +82,11 @@ config EXYNOS4_DEV_DWMCI help Compile in platform device definitions for DWMCI +config EXYNOS4_DEV_USB_OHCI + bool + help + Compile in platform device definition for USB OHCI + config EXYNOS4_SETUP_I2C1 bool help diff --git a/arch/arm/mach-exynos/Makefile b/arch/arm/mach-exynos/Makefile index 59069a3..f5f3b79 100644 --- a/arch/arm/mach-exynos/Makefile +++ b/arch/arm/mach-exynos/Makefile @@ -44,6 +44,7 @@ obj-$(CONFIG_EXYNOS4_DEV_AHCI) += dev-ahci.o obj-$(CONFIG_EXYNOS4_DEV_PD) += dev-pd.o obj-$(CONFIG_EXYNOS4_DEV_SYSMMU) += dev-sysmmu.o obj-$(CONFIG_EXYNOS4_DEV_DWMCI) += dev-dwmci.o +obj-$(CONFIG_EXYNOS4_DEV_USB_OHCI) += dev-ohci.o obj-$(CONFIG_EXYNOS4_SETUP_FIMC) += setup-fimc.o obj-$(CONFIG_EXYNOS4_SETUP_FIMD0) += setup-fimd0.o diff --git a/arch/arm/mach-exynos/dev-ohci.c b/arch/arm/mach-exynos/dev-ohci.c new file mode 100644 index 0000000..b8e7530 --- /dev/null +++ b/arch/arm/mach-exynos/dev-ohci.c @@ -0,0 +1,52 @@ +/* linux/arch/arm/mach-exynos/dev-ohci.c + * + * Copyright (c) 2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * EXYNOS - OHCI support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include + +#include +#include +#include + +#include +#include + +static struct resource exynos4_ohci_resource[] = { + [0] = DEFINE_RES_MEM(EXYNOS4_PA_OHCI, SZ_256), + [1] = DEFINE_RES_IRQ(IRQ_USB_HOST), +}; + +static u64 exynos4_ohci_dma_mask = DMA_BIT_MASK(32); + +struct platform_device exynos4_device_ohci = { + .name = "exynos-ohci", + .id = -1, + .num_resources = ARRAY_SIZE(exynos4_ohci_resource), + .resource = exynos4_ohci_resource, + .dev = { + .dma_mask = &exynos4_ohci_dma_mask, + .coherent_dma_mask = DMA_BIT_MASK(32), + } +}; + +void __init exynos4_ohci_set_platdata(struct exynos4_ohci_platdata *pd) +{ + struct exynos4_ohci_platdata *npd; + + npd = s3c_set_platdata(pd, sizeof(struct exynos4_ohci_platdata), + &exynos4_device_ohci); + + if (!npd->phy_init) + npd->phy_init = s5p_usb_phy_init; + if (!npd->phy_exit) + npd->phy_exit = s5p_usb_phy_exit; +} diff --git a/arch/arm/mach-exynos/include/mach/map.h b/arch/arm/mach-exynos/include/mach/map.h index 058541d..01e1cf3 100644 --- a/arch/arm/mach-exynos/include/mach/map.h +++ b/arch/arm/mach-exynos/include/mach/map.h @@ -107,6 +107,7 @@ #define EXYNOS4_PA_SROMC 0x12570000 #define EXYNOS4_PA_EHCI 0x12580000 +#define EXYNOS4_PA_OHCI 0x12590000 #define EXYNOS4_PA_HSPHY 0x125B0000 #define EXYNOS4_PA_MFC 0x13400000 diff --git a/arch/arm/mach-exynos/include/mach/ohci.h b/arch/arm/mach-exynos/include/mach/ohci.h new file mode 100644 index 0000000..c256c59 --- /dev/null +++ b/arch/arm/mach-exynos/include/mach/ohci.h @@ -0,0 +1,21 @@ +/* + * Copyright (C) 2011 Samsung Electronics Co.Ltd + * http://www.samsung.com/ + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#ifndef __MACH_EXYNOS_OHCI_H +#define __MACH_EXYNOS_OHCI_H + +struct exynos4_ohci_platdata { + int (*phy_init)(struct platform_device *pdev, int type); + int (*phy_exit)(struct platform_device *pdev, int type); +}; + +extern void exynos4_ohci_set_platdata(struct exynos4_ohci_platdata *pd); + +#endif /* __MACH_EXYNOS_OHCI_H */ diff --git a/arch/arm/mach-exynos/setup-usb-phy.c b/arch/arm/mach-exynos/setup-usb-phy.c index 39aca04..41743d2 100644 --- a/arch/arm/mach-exynos/setup-usb-phy.c +++ b/arch/arm/mach-exynos/setup-usb-phy.c @@ -19,6 +19,13 @@ #include #include +static atomic_t host_usage; + +static int exynos4_usb_host_phy_is_on(void) +{ + return (readl(EXYNOS4_PHYPWR) & PHY1_STD_ANALOG_POWERDOWN) ? 0 : 1; +} + static int exynos4_usb_phy1_init(struct platform_device *pdev) { struct clk *otg_clk; @@ -27,6 +34,8 @@ static int exynos4_usb_phy1_init(struct platform_device *pdev) u32 rstcon; int err; + atomic_inc(&host_usage); + otg_clk = clk_get(&pdev->dev, "otg"); if (IS_ERR(otg_clk)) { dev_err(&pdev->dev, "Failed to get otg clock\n"); @@ -39,6 +48,9 @@ static int exynos4_usb_phy1_init(struct platform_device *pdev) return err; } + if (exynos4_usb_host_phy_is_on()) + return 0; + writel(readl(S5P_USBHOST_PHY_CONTROL) | S5P_USBHOST_PHY_ENABLE, S5P_USBHOST_PHY_CONTROL); @@ -95,6 +107,9 @@ static int exynos4_usb_phy1_exit(struct platform_device *pdev) struct clk *otg_clk; int err; + if (atomic_dec_return(&host_usage) > 0) + return 0; + otg_clk = clk_get(&pdev->dev, "otg"); if (IS_ERR(otg_clk)) { dev_err(&pdev->dev, "Failed to get otg clock\n"); diff --git a/arch/arm/plat-samsung/include/plat/devs.h b/arch/arm/plat-samsung/include/plat/devs.h index ab633c9..a2ff27e 100644 --- a/arch/arm/plat-samsung/include/plat/devs.h +++ b/arch/arm/plat-samsung/include/plat/devs.h @@ -129,6 +129,7 @@ extern struct platform_device exynos4_device_dwmci; extern struct platform_device exynos4_device_i2s0; extern struct platform_device exynos4_device_i2s1; extern struct platform_device exynos4_device_i2s2; +extern struct platform_device exynos4_device_ohci; extern struct platform_device exynos4_device_pcm0; extern struct platform_device exynos4_device_pcm1; extern struct platform_device exynos4_device_pcm2; -- cgit v0.10.2 From 744f20f28028447cc4486d5ba0a6955840028e37 Mon Sep 17 00:00:00 2001 From: Jingoo Han Date: Fri, 23 Dec 2011 11:20:50 +0900 Subject: ARM: EXYNOS: Add USB OHCI support to SMDKV310 board Signed-off-by: Jingoo Han Signed-off-by: Kukjin Kim diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig index a1d1a06..5328011 100644 --- a/arch/arm/mach-exynos/Kconfig +++ b/arch/arm/mach-exynos/Kconfig @@ -184,6 +184,7 @@ config MACH_SMDKV310 select SAMSUNG_DEV_KEYPAD select EXYNOS4_DEV_PD select SAMSUNG_DEV_PWM + select EXYNOS4_DEV_USB_OHCI select EXYNOS4_DEV_SYSMMU select EXYNOS4_SETUP_FIMD0 select EXYNOS4_SETUP_I2C1 diff --git a/arch/arm/mach-exynos/mach-smdkv310.c b/arch/arm/mach-exynos/mach-smdkv310.c index cec2afa..25a5a40 100644 --- a/arch/arm/mach-exynos/mach-smdkv310.c +++ b/arch/arm/mach-exynos/mach-smdkv310.c @@ -42,6 +42,7 @@ #include #include +#include /* Following are default values for UCON, ULCON and UFCON UART registers */ #define SMDKV310_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \ @@ -245,6 +246,16 @@ static void __init smdkv310_ehci_init(void) s5p_ehci_set_platdata(pdata); } +/* USB OHCI */ +static struct exynos4_ohci_platdata smdkv310_ohci_pdata; + +static void __init smdkv310_ohci_init(void) +{ + struct exynos4_ohci_platdata *pdata = &smdkv310_ohci_pdata; + + exynos4_ohci_set_platdata(pdata); +} + static struct platform_device *smdkv310_devices[] __initdata = { &s3c_device_hsmmc0, &s3c_device_hsmmc1, @@ -261,6 +272,7 @@ static struct platform_device *smdkv310_devices[] __initdata = { &s5p_device_fimc3, &exynos4_device_ac97, &exynos4_device_i2s0, + &exynos4_device_ohci, &samsung_device_keypad, &s5p_device_mfc, &s5p_device_mfc_l, @@ -363,6 +375,7 @@ static void __init smdkv310_machine_init(void) s5p_fimd0_set_platdata(&smdkv310_lcd0_pdata); smdkv310_ehci_init(); + smdkv310_ohci_init(); clk_xusbxti.rate = 24000000; platform_add_devices(smdkv310_devices, ARRAY_SIZE(smdkv310_devices)); -- cgit v0.10.2 From 62194244cf871aec73b5854077f1c527416ccd7b Mon Sep 17 00:00:00 2001 From: Jingoo Han Date: Fri, 23 Dec 2011 11:20:54 +0900 Subject: USB: Add Samsung Exynos OHCI diver This patch adds USB OHCI driver for Samsung EXYNOS SoCs. Signed-off-by: Jingoo Han Acked-by: Greg Kroah-Hartman Signed-off-by: Kukjin Kim diff --git a/drivers/usb/Kconfig b/drivers/usb/Kconfig index 791f11b..75823a1 100644 --- a/drivers/usb/Kconfig +++ b/drivers/usb/Kconfig @@ -48,6 +48,7 @@ config USB_ARCH_HAS_OHCI default y if ARCH_DAVINCI_DA8XX default y if ARCH_CNS3XXX default y if PLAT_SPEAR + default y if ARCH_EXYNOS # PPC: default y if STB03xxx default y if PPC_MPC52xx diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig index 060e0e2..eea85dc 100644 --- a/drivers/usb/host/Kconfig +++ b/drivers/usb/host/Kconfig @@ -371,6 +371,12 @@ config USB_OHCI_SH Enables support for the on-chip OHCI controller on the SuperH. If you use the PCI OHCI controller, this option is not necessary. +config USB_OHCI_EXYNOS + boolean "OHCI support for Samsung EXYNOS SoC Series" + depends on USB_OHCI_HCD && ARCH_EXYNOS + help + Enable support for the Samsung Exynos SOC's on-chip OHCI controller. + config USB_CNS3XXX_OHCI bool "Cavium CNS3XXX OHCI Module" depends on USB_OHCI_HCD && ARCH_CNS3XXX diff --git a/drivers/usb/host/ohci-exynos.c b/drivers/usb/host/ohci-exynos.c new file mode 100644 index 0000000..55aa35a --- /dev/null +++ b/drivers/usb/host/ohci-exynos.c @@ -0,0 +1,274 @@ +/* + * SAMSUNG EXYNOS USB HOST OHCI Controller + * + * Copyright (C) 2011 Samsung Electronics Co.Ltd + * Author: Jingoo Han + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ + +#include +#include +#include +#include + +struct exynos_ohci_hcd { + struct device *dev; + struct usb_hcd *hcd; + struct clk *clk; +}; + +static int ohci_exynos_start(struct usb_hcd *hcd) +{ + struct ohci_hcd *ohci = hcd_to_ohci(hcd); + int ret; + + ohci_dbg(ohci, "ohci_exynos_start, ohci:%p", ohci); + + ret = ohci_init(ohci); + if (ret < 0) + return ret; + + ret = ohci_run(ohci); + if (ret < 0) { + err("can't start %s", hcd->self.bus_name); + ohci_stop(hcd); + return ret; + } + + return 0; +} + +static const struct hc_driver exynos_ohci_hc_driver = { + .description = hcd_name, + .product_desc = "EXYNOS OHCI Host Controller", + .hcd_priv_size = sizeof(struct ohci_hcd), + + .irq = ohci_irq, + .flags = HCD_MEMORY|HCD_USB11, + + .start = ohci_exynos_start, + .stop = ohci_stop, + .shutdown = ohci_shutdown, + + .get_frame_number = ohci_get_frame, + + .urb_enqueue = ohci_urb_enqueue, + .urb_dequeue = ohci_urb_dequeue, + .endpoint_disable = ohci_endpoint_disable, + + .hub_status_data = ohci_hub_status_data, + .hub_control = ohci_hub_control, +#ifdef CONFIG_PM + .bus_suspend = ohci_bus_suspend, + .bus_resume = ohci_bus_resume, +#endif + .start_port_reset = ohci_start_port_reset, +}; + +static int __devinit exynos_ohci_probe(struct platform_device *pdev) +{ + struct exynos4_ohci_platdata *pdata; + struct exynos_ohci_hcd *exynos_ohci; + struct usb_hcd *hcd; + struct ohci_hcd *ohci; + struct resource *res; + int irq; + int err; + + pdata = pdev->dev.platform_data; + if (!pdata) { + dev_err(&pdev->dev, "No platform data defined\n"); + return -EINVAL; + } + + exynos_ohci = kzalloc(sizeof(struct exynos_ohci_hcd), GFP_KERNEL); + if (!exynos_ohci) + return -ENOMEM; + + exynos_ohci->dev = &pdev->dev; + + hcd = usb_create_hcd(&exynos_ohci_hc_driver, &pdev->dev, + dev_name(&pdev->dev)); + if (!hcd) { + dev_err(&pdev->dev, "Unable to create HCD\n"); + err = -ENOMEM; + goto fail_hcd; + } + + exynos_ohci->hcd = hcd; + exynos_ohci->clk = clk_get(&pdev->dev, "usbhost"); + + if (IS_ERR(exynos_ohci->clk)) { + dev_err(&pdev->dev, "Failed to get usbhost clock\n"); + err = PTR_ERR(exynos_ohci->clk); + goto fail_clk; + } + + err = clk_enable(exynos_ohci->clk); + if (err) + goto fail_clken; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) { + dev_err(&pdev->dev, "Failed to get I/O memory\n"); + err = -ENXIO; + goto fail_io; + } + + hcd->rsrc_start = res->start; + hcd->rsrc_len = resource_size(res); + hcd->regs = ioremap(res->start, resource_size(res)); + if (!hcd->regs) { + dev_err(&pdev->dev, "Failed to remap I/O memory\n"); + err = -ENOMEM; + goto fail_io; + } + + irq = platform_get_irq(pdev, 0); + if (!irq) { + dev_err(&pdev->dev, "Failed to get IRQ\n"); + err = -ENODEV; + goto fail; + } + + if (pdata->phy_init) + pdata->phy_init(pdev, S5P_USB_PHY_HOST); + + ohci = hcd_to_ohci(hcd); + ohci_hcd_init(ohci); + + err = usb_add_hcd(hcd, irq, IRQF_SHARED); + if (err) { + dev_err(&pdev->dev, "Failed to add USB HCD\n"); + goto fail; + } + + platform_set_drvdata(pdev, exynos_ohci); + + return 0; + +fail: + iounmap(hcd->regs); +fail_io: + clk_disable(exynos_ohci->clk); +fail_clken: + clk_put(exynos_ohci->clk); +fail_clk: + usb_put_hcd(hcd); +fail_hcd: + kfree(exynos_ohci); + return err; +} + +static int __devexit exynos_ohci_remove(struct platform_device *pdev) +{ + struct exynos4_ohci_platdata *pdata = pdev->dev.platform_data; + struct exynos_ohci_hcd *exynos_ohci = platform_get_drvdata(pdev); + struct usb_hcd *hcd = exynos_ohci->hcd; + + usb_remove_hcd(hcd); + + if (pdata && pdata->phy_exit) + pdata->phy_exit(pdev, S5P_USB_PHY_HOST); + + iounmap(hcd->regs); + + clk_disable(exynos_ohci->clk); + clk_put(exynos_ohci->clk); + + usb_put_hcd(hcd); + kfree(exynos_ohci); + + return 0; +} + +static void exynos_ohci_shutdown(struct platform_device *pdev) +{ + struct exynos_ohci_hcd *exynos_ohci = platform_get_drvdata(pdev); + struct usb_hcd *hcd = exynos_ohci->hcd; + + if (hcd->driver->shutdown) + hcd->driver->shutdown(hcd); +} + +#ifdef CONFIG_PM +static int exynos_ohci_suspend(struct device *dev) +{ + struct exynos_ohci_hcd *exynos_ohci = dev_get_drvdata(dev); + struct usb_hcd *hcd = exynos_ohci->hcd; + struct ohci_hcd *ohci = hcd_to_ohci(hcd); + struct platform_device *pdev = to_platform_device(dev); + struct exynos4_ohci_platdata *pdata = pdev->dev.platform_data; + unsigned long flags; + int rc = 0; + + /* + * Root hub was already suspended. Disable irq emission and + * mark HW unaccessible, bail out if RH has been resumed. Use + * the spinlock to properly synchronize with possible pending + * RH suspend or resume activity. + * + * This is still racy as hcd->state is manipulated outside of + * any locks =P But that will be a different fix. + */ + spin_lock_irqsave(&ohci->lock, flags); + if (hcd->state != HC_STATE_SUSPENDED && hcd->state != HC_STATE_HALT) { + rc = -EINVAL; + goto fail; + } + + clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags); + + if (pdata && pdata->phy_exit) + pdata->phy_exit(pdev, S5P_USB_PHY_HOST); +fail: + spin_unlock_irqrestore(&ohci->lock, flags); + + return rc; +} + +static int exynos_ohci_resume(struct device *dev) +{ + struct exynos_ohci_hcd *exynos_ohci = dev_get_drvdata(dev); + struct usb_hcd *hcd = exynos_ohci->hcd; + struct platform_device *pdev = to_platform_device(dev); + struct exynos4_ohci_platdata *pdata = pdev->dev.platform_data; + + if (pdata && pdata->phy_init) + pdata->phy_init(pdev, S5P_USB_PHY_HOST); + + /* Mark hardware accessible again as we are out of D3 state by now */ + set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags); + + ohci_finish_controller_resume(hcd); + + return 0; +} +#else +#define exynos_ohci_suspend NULL +#define exynos_ohci_resume NULL +#endif + +static const struct dev_pm_ops exynos_ohci_pm_ops = { + .suspend = exynos_ohci_suspend, + .resume = exynos_ohci_resume, +}; + +static struct platform_driver exynos_ohci_driver = { + .probe = exynos_ohci_probe, + .remove = __devexit_p(exynos_ohci_remove), + .shutdown = exynos_ohci_shutdown, + .driver = { + .name = "exynos-ohci", + .owner = THIS_MODULE, + .pm = &exynos_ohci_pm_ops, + } +}; + +MODULE_ALIAS("platform:exynos-ohci"); +MODULE_AUTHOR("Jingoo Han "); diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c index b263919..a1006ff 100644 --- a/drivers/usb/host/ohci-hcd.c +++ b/drivers/usb/host/ohci-hcd.c @@ -1005,6 +1005,11 @@ MODULE_LICENSE ("GPL"); #define PLATFORM_DRIVER ohci_hcd_s3c2410_driver #endif +#ifdef CONFIG_USB_OHCI_EXYNOS +#include "ohci-exynos.c" +#define PLATFORM_DRIVER exynos_ohci_driver +#endif + #ifdef CONFIG_USB_OHCI_HCD_OMAP1 #include "ohci-omap.c" #define OMAP1_PLATFORM_DRIVER ohci_hcd_omap_driver -- cgit v0.10.2 From 95de77d4a405cd320ec39c3c19f060eed87fd9ce Mon Sep 17 00:00:00 2001 From: Tushar Behera Date: Sat, 24 Dec 2011 12:09:06 +0900 Subject: ARM: EXYNOS: Add USB OHCI support to ORIGEN board Signed-off-by: Tushar Behera Signed-off-by: Angus Ainslie Acked-by: Jingoo Han Signed-off-by: Kukjin Kim diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig index 5328011..5ca0bdd 100644 --- a/arch/arm/mach-exynos/Kconfig +++ b/arch/arm/mach-exynos/Kconfig @@ -294,6 +294,7 @@ config MACH_ORIGEN select SAMSUNG_DEV_BACKLIGHT select SAMSUNG_DEV_PWM select EXYNOS4_DEV_PD + select EXYNOS4_DEV_USB_OHCI select EXYNOS4_SETUP_FIMD0 select EXYNOS4_SETUP_SDHCI select EXYNOS4_SETUP_USB_PHY diff --git a/arch/arm/mach-exynos/mach-origen.c b/arch/arm/mach-exynos/mach-origen.c index f80b563..b805e59 100644 --- a/arch/arm/mach-exynos/mach-origen.c +++ b/arch/arm/mach-exynos/mach-origen.c @@ -41,6 +41,7 @@ #include #include +#include #include /* Following are default values for UCON, ULCON and UFCON UART registers */ @@ -483,6 +484,16 @@ static void __init origen_ehci_init(void) s5p_ehci_set_platdata(pdata); } +/* USB OHCI */ +static struct exynos4_ohci_platdata origen_ohci_pdata; + +static void __init origen_ohci_init(void) +{ + struct exynos4_ohci_platdata *pdata = &origen_ohci_pdata; + + exynos4_ohci_set_platdata(pdata); +} + static struct gpio_keys_button origen_gpio_keys_table[] = { { .code = KEY_MENU, @@ -606,6 +617,7 @@ static struct platform_device *origen_devices[] __initdata = { &s5p_device_mfc_l, &s5p_device_mfc_r, &s5p_device_mixer, + &exynos4_device_ohci, &exynos4_device_pd[PD_LCD0], &exynos4_device_pd[PD_TV], &exynos4_device_pd[PD_G3D], @@ -670,6 +682,7 @@ static void __init origen_machine_init(void) s3c_sdhci0_set_platdata(&origen_hsmmc0_pdata); origen_ehci_init(); + origen_ohci_init(); clk_xusbxti.rate = 24000000; s5p_tv_setup(); -- cgit v0.10.2