From cdeb1755d7b965ad0d58cff4db1cf6de4ba3b2ba Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Fri, 26 Jun 2015 16:28:13 -0300 Subject: [media] media/dvb: fix ts2020.c Kconfig and build Fix kconfig warning that is caused by DVB_TS2020: warning: (DVB_TS2020 && SND_SOC_ADAU1761_I2C && SND_SOC_ADAU1781_I2C && SND_SOC_ADAU1977_I2C && SND_SOC_RT5677 && EXTCON_MAX14577 && EXTCON_MAX77693 && EXTCON_MAX77843) selects REGMAP_I2C which has unmet direct dependencies (I2C) This fixes many subsequent build errors. Signed-off-by: Randy Dunlap Cc: Konstantin Dimitrov Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/dvb-frontends/Kconfig b/drivers/media/dvb-frontends/Kconfig index 0d35f58..5ab90f3 100644 --- a/drivers/media/dvb-frontends/Kconfig +++ b/drivers/media/dvb-frontends/Kconfig @@ -240,7 +240,7 @@ config DVB_SI21XX config DVB_TS2020 tristate "Montage Tehnology TS2020 based tuners" - depends on DVB_CORE + depends on DVB_CORE && I2C select REGMAP_I2C default m if !MEDIA_SUBDRV_AUTOSELECT help -- cgit v0.10.2 From 5bab86243d949cf021b0f104faafc18f5d20283c Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Fri, 26 Jun 2015 17:43:24 -0300 Subject: [media] media/pci/cobalt: fix Kconfig and build when SND is not enabled Fix build errors in cobalt driver when CONFIG_SND is not enabled. Fixes these build errors: ERROR: "snd_pcm_period_elapsed" [drivers/media/pci/cobalt/cobalt.ko] undefined! ERROR: "_snd_pcm_stream_lock_irqsave" [drivers/media/pci/cobalt/cobalt.ko] undefined! ERROR: "snd_pcm_hw_constraint_integer" [drivers/media/pci/cobalt/cobalt.ko] undefined! ERROR: "snd_pcm_set_ops" [drivers/media/pci/cobalt/cobalt.ko] undefined! ERROR: "snd_pcm_stream_unlock_irqrestore" [drivers/media/pci/cobalt/cobalt.ko] undefined! ERROR: "snd_pcm_lib_ioctl" [drivers/media/pci/cobalt/cobalt.ko] undefined! ERROR: "snd_card_new" [drivers/media/pci/cobalt/cobalt.ko] undefined! ERROR: "snd_card_free" [drivers/media/pci/cobalt/cobalt.ko] undefined! ERROR: "snd_card_register" [drivers/media/pci/cobalt/cobalt.ko] undefined! ERROR: "snd_pcm_new" [drivers/media/pci/cobalt/cobalt.ko] undefined! Signed-off-by: Randy Dunlap Cc: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/pci/cobalt/Kconfig b/drivers/media/pci/cobalt/Kconfig index 3be1b2c..6a1c008 100644 --- a/drivers/media/pci/cobalt/Kconfig +++ b/drivers/media/pci/cobalt/Kconfig @@ -2,6 +2,7 @@ config VIDEO_COBALT tristate "Cisco Cobalt support" depends on VIDEO_V4L2 && I2C && MEDIA_CONTROLLER depends on PCI_MSI && MTD_COMPLEX_MAPPINGS && GPIOLIB + depends on SND select I2C_ALGOBIT select VIDEO_ADV7604 select VIDEO_ADV7511 -- cgit v0.10.2 From 6d058c5643e16779ae4c001d2e893c140940e48f Mon Sep 17 00:00:00 2001 From: Sakari Ailus Date: Fri, 3 Jul 2015 04:37:07 -0300 Subject: [media] vb2: Only requeue buffers immediately once streaming is started Buffers can be returned back to videobuf2 in driver's streamon handler. In this case vb2_buffer_done() with buffer state VB2_BUF_STATE_QUEUED will cause the driver's buf_queue vb2 operation to be called, queueing the same buffer again only to be returned to videobuf2 using vb2_buffer_done() and so on. Add a new buffer state VB2_BUF_STATE_REQUEUEING which, when used as the state argument to vb2_buffer_done(), will result in buffers queued to the driver. Using VB2_BUF_STATE_QUEUED will leave the buffer to videobuf2, as it was before "[media] vb2: allow requeuing buffers while streaming". Fixes: ce0eff016f72 ("[media] vb2: allow requeuing buffers while streaming") [mchehab@osg.samsung.com: fix warning: enumeration value 'VB2_BUF_STATE_REQUEUEING' not handled in switch] Signed-off-by: Sakari Ailus Acked-by: Hans Verkuil Cc: stable@vger.kernel.org # for v4.1 Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/pci/cobalt/cobalt-irq.c b/drivers/media/pci/cobalt/cobalt-irq.c index dd4bff9..d1f5898 100644 --- a/drivers/media/pci/cobalt/cobalt-irq.c +++ b/drivers/media/pci/cobalt/cobalt-irq.c @@ -139,7 +139,7 @@ done: also know about dropped frames. */ cb->vb.v4l2_buf.sequence = s->sequence++; vb2_buffer_done(&cb->vb, (skip || s->unstable_frame) ? - VB2_BUF_STATE_QUEUED : VB2_BUF_STATE_DONE); + VB2_BUF_STATE_REQUEUEING : VB2_BUF_STATE_DONE); } irqreturn_t cobalt_irq_handler(int irq, void *dev_id) diff --git a/drivers/media/v4l2-core/videobuf2-core.c b/drivers/media/v4l2-core/videobuf2-core.c index 93b3154..0c7b6a7 100644 --- a/drivers/media/v4l2-core/videobuf2-core.c +++ b/drivers/media/v4l2-core/videobuf2-core.c @@ -715,6 +715,7 @@ static void __fill_v4l2_buffer(struct vb2_buffer *vb, struct v4l2_buffer *b) break; case VB2_BUF_STATE_PREPARING: case VB2_BUF_STATE_DEQUEUED: + case VB2_BUF_STATE_REQUEUEING: /* nothing */ break; } @@ -1182,7 +1183,8 @@ void vb2_buffer_done(struct vb2_buffer *vb, enum vb2_buffer_state state) if (WARN_ON(state != VB2_BUF_STATE_DONE && state != VB2_BUF_STATE_ERROR && - state != VB2_BUF_STATE_QUEUED)) + state != VB2_BUF_STATE_QUEUED && + state != VB2_BUF_STATE_REQUEUEING)) state = VB2_BUF_STATE_ERROR; #ifdef CONFIG_VIDEO_ADV_DEBUG @@ -1199,22 +1201,30 @@ void vb2_buffer_done(struct vb2_buffer *vb, enum vb2_buffer_state state) for (plane = 0; plane < vb->num_planes; ++plane) call_void_memop(vb, finish, vb->planes[plane].mem_priv); - /* Add the buffer to the done buffers list */ spin_lock_irqsave(&q->done_lock, flags); - vb->state = state; - if (state != VB2_BUF_STATE_QUEUED) + if (state == VB2_BUF_STATE_QUEUED || + state == VB2_BUF_STATE_REQUEUEING) { + vb->state = VB2_BUF_STATE_QUEUED; + } else { + /* Add the buffer to the done buffers list */ list_add_tail(&vb->done_entry, &q->done_list); + vb->state = state; + } atomic_dec(&q->owned_by_drv_count); spin_unlock_irqrestore(&q->done_lock, flags); - if (state == VB2_BUF_STATE_QUEUED) { + switch (state) { + case VB2_BUF_STATE_QUEUED: + return; + case VB2_BUF_STATE_REQUEUEING: if (q->start_streaming_called) __enqueue_in_driver(vb); return; + default: + /* Inform any processes that may be waiting for buffers */ + wake_up(&q->done_wq); + break; } - - /* Inform any processes that may be waiting for buffers */ - wake_up(&q->done_wq); } EXPORT_SYMBOL_GPL(vb2_buffer_done); diff --git a/include/media/videobuf2-core.h b/include/media/videobuf2-core.h index 22a44c2..c192e1b 100644 --- a/include/media/videobuf2-core.h +++ b/include/media/videobuf2-core.h @@ -139,6 +139,7 @@ enum vb2_io_modes { * @VB2_BUF_STATE_PREPARING: buffer is being prepared in videobuf * @VB2_BUF_STATE_PREPARED: buffer prepared in videobuf and by the driver * @VB2_BUF_STATE_QUEUED: buffer queued in videobuf, but not in driver + * @VB2_BUF_STATE_REQUEUEING: re-queue a buffer to the driver * @VB2_BUF_STATE_ACTIVE: buffer queued in driver and possibly used * in a hardware operation * @VB2_BUF_STATE_DONE: buffer returned from driver to videobuf, but @@ -152,6 +153,7 @@ enum vb2_buffer_state { VB2_BUF_STATE_PREPARING, VB2_BUF_STATE_PREPARED, VB2_BUF_STATE_QUEUED, + VB2_BUF_STATE_REQUEUEING, VB2_BUF_STATE_ACTIVE, VB2_BUF_STATE_DONE, VB2_BUF_STATE_ERROR, -- cgit v0.10.2 From 2fa3dc4ea7c1cdf4eed288de9a6cc5d3a8befddd Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Sun, 12 Jul 2015 20:08:34 -0300 Subject: [media] vb2: Fix compilation breakage when !CONFIG_BUG Commit 77a3c6fd90c9 ("[media] vb2: Don't WARN when v4l2_buffer.bytesused is 0 for multiplanar buffers") uses the __WARN() macro which isn't defined when CONFIG_BUG isn't set. This introduces a compilation breakage. Fix it by using WARN_ON() instead. The commit was also broken in that it merged v1 of the patch while a new v2 version had been submitted, reviewed and acked. Fix it by incorporating the changes from v1 to v2. Fixes: 77a3c6fd90c9 ("[media] vb2: Don't WARN when v4l2_buffer.bytesused is 0 for multiplanar buffers") Signed-off-by: Laurent Pinchart Acked-by: Larry Finger Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/v4l2-core/videobuf2-core.c b/drivers/media/v4l2-core/videobuf2-core.c index 0c7b6a7..a14c428 100644 --- a/drivers/media/v4l2-core/videobuf2-core.c +++ b/drivers/media/v4l2-core/videobuf2-core.c @@ -1254,19 +1254,19 @@ EXPORT_SYMBOL_GPL(vb2_discard_done); static void vb2_warn_zero_bytesused(struct vb2_buffer *vb) { - static bool __check_once __read_mostly; + static bool check_once; - if (__check_once) + if (check_once) return; - __check_once = true; - __WARN(); + check_once = true; + WARN_ON(1); - pr_warn_once("use of bytesused == 0 is deprecated and will be removed in the future,\n"); + pr_warn("use of bytesused == 0 is deprecated and will be removed in the future,\n"); if (vb->vb2_queue->allow_zero_bytesused) - pr_warn_once("use VIDIOC_DECODER_CMD(V4L2_DEC_CMD_STOP) instead.\n"); + pr_warn("use VIDIOC_DECODER_CMD(V4L2_DEC_CMD_STOP) instead.\n"); else - pr_warn_once("use the actual size instead.\n"); + pr_warn("use the actual size instead.\n"); } /** -- cgit v0.10.2 From 23f28f2adcf608170c9062b1f490c4f0dcc995e3 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?David=20H=C3=A4rdeman?= Date: Mon, 20 Jul 2015 16:16:31 -0300 Subject: Revert "[media] rc: nuvoton-cir: Add support for writing wakeup samples via sysfs filter callback" MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This reverts commit da7ee60b03bd66bb10974d7444aa444de6391312. The current code is not mature enough, the API should allow a single protocol to be specified. Also, the current code contains heuristics that will depend on module load order. Signed-off-by: David Härdeman Acked-by: Antti Seppälä Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/rc/nuvoton-cir.c b/drivers/media/rc/nuvoton-cir.c index baeb597..85af7a8 100644 --- a/drivers/media/rc/nuvoton-cir.c +++ b/drivers/media/rc/nuvoton-cir.c @@ -526,130 +526,6 @@ static int nvt_set_tx_carrier(struct rc_dev *dev, u32 carrier) return 0; } -static int nvt_write_wakeup_codes(struct rc_dev *dev, - const u8 *wakeup_sample_buf, int count) -{ - int i = 0; - u8 reg, reg_learn_mode; - unsigned long flags; - struct nvt_dev *nvt = dev->priv; - - nvt_dbg_wake("writing wakeup samples"); - - reg = nvt_cir_wake_reg_read(nvt, CIR_WAKE_IRCON); - reg_learn_mode = reg & ~CIR_WAKE_IRCON_MODE0; - reg_learn_mode |= CIR_WAKE_IRCON_MODE1; - - /* Lock the learn area to prevent racing with wake-isr */ - spin_lock_irqsave(&nvt->nvt_lock, flags); - - /* Enable fifo writes */ - nvt_cir_wake_reg_write(nvt, reg_learn_mode, CIR_WAKE_IRCON); - - /* Clear cir wake rx fifo */ - nvt_clear_cir_wake_fifo(nvt); - - if (count > WAKE_FIFO_LEN) { - nvt_dbg_wake("HW FIFO too small for all wake samples"); - count = WAKE_FIFO_LEN; - } - - if (count) - pr_info("Wake samples (%d) =", count); - else - pr_info("Wake sample fifo cleared"); - - /* Write wake samples to fifo */ - for (i = 0; i < count; i++) { - pr_cont(" %02x", wakeup_sample_buf[i]); - nvt_cir_wake_reg_write(nvt, wakeup_sample_buf[i], - CIR_WAKE_WR_FIFO_DATA); - } - pr_cont("\n"); - - /* Switch cir to wakeup mode and disable fifo writing */ - nvt_cir_wake_reg_write(nvt, reg, CIR_WAKE_IRCON); - - /* Set number of bytes needed for wake */ - nvt_cir_wake_reg_write(nvt, count ? count : - CIR_WAKE_FIFO_CMP_BYTES, - CIR_WAKE_FIFO_CMP_DEEP); - - spin_unlock_irqrestore(&nvt->nvt_lock, flags); - - return 0; -} - -static int nvt_ir_raw_set_wakeup_filter(struct rc_dev *dev, - struct rc_scancode_filter *sc_filter) -{ - u8 *reg_buf; - u8 buf_val; - int i, ret, count; - unsigned int val; - struct ir_raw_event *raw; - bool complete; - - /* Require both mask and data to be set before actually committing */ - if (!sc_filter->mask || !sc_filter->data) - return 0; - - raw = kmalloc_array(WAKE_FIFO_LEN, sizeof(*raw), GFP_KERNEL); - if (!raw) - return -ENOMEM; - - ret = ir_raw_encode_scancode(dev->enabled_wakeup_protocols, sc_filter, - raw, WAKE_FIFO_LEN); - complete = (ret != -ENOBUFS); - if (!complete) - ret = WAKE_FIFO_LEN; - else if (ret < 0) - goto out_raw; - - reg_buf = kmalloc_array(WAKE_FIFO_LEN, sizeof(*reg_buf), GFP_KERNEL); - if (!reg_buf) { - ret = -ENOMEM; - goto out_raw; - } - - /* Inspect the ir samples */ - for (i = 0, count = 0; i < ret && count < WAKE_FIFO_LEN; ++i) { - val = NS_TO_US((raw[i]).duration) / SAMPLE_PERIOD; - - /* Split too large values into several smaller ones */ - while (val > 0 && count < WAKE_FIFO_LEN) { - - /* Skip last value for better comparison tolerance */ - if (complete && i == ret - 1 && val < BUF_LEN_MASK) - break; - - /* Clamp values to BUF_LEN_MASK at most */ - buf_val = (val > BUF_LEN_MASK) ? BUF_LEN_MASK : val; - - reg_buf[count] = buf_val; - val -= buf_val; - if ((raw[i]).pulse) - reg_buf[count] |= BUF_PULSE_BIT; - count++; - } - } - - ret = nvt_write_wakeup_codes(dev, reg_buf, count); - - kfree(reg_buf); -out_raw: - kfree(raw); - - return ret; -} - -/* Dummy implementation. nuvoton is agnostic to the protocol used */ -static int nvt_ir_raw_change_wakeup_protocol(struct rc_dev *dev, - u64 *rc_type) -{ - return 0; -} - /* * nvt_tx_ir * @@ -1167,14 +1043,11 @@ static int nvt_probe(struct pnp_dev *pdev, const struct pnp_device_id *dev_id) /* Set up the rc device */ rdev->priv = nvt; rdev->driver_type = RC_DRIVER_IR_RAW; - rdev->encode_wakeup = true; rdev->allowed_protocols = RC_BIT_ALL; rdev->open = nvt_open; rdev->close = nvt_close; rdev->tx_ir = nvt_tx_ir; rdev->s_tx_carrier = nvt_set_tx_carrier; - rdev->s_wakeup_filter = nvt_ir_raw_set_wakeup_filter; - rdev->change_wakeup_protocol = nvt_ir_raw_change_wakeup_protocol; rdev->input_name = "Nuvoton w836x7hg Infrared Remote Transceiver"; rdev->input_phys = "nuvoton/cir0"; rdev->input_id.bustype = BUS_HOST; diff --git a/drivers/media/rc/nuvoton-cir.h b/drivers/media/rc/nuvoton-cir.h index 9d0e161..e1cf23c 100644 --- a/drivers/media/rc/nuvoton-cir.h +++ b/drivers/media/rc/nuvoton-cir.h @@ -63,7 +63,6 @@ static int debug; */ #define TX_BUF_LEN 256 #define RX_BUF_LEN 32 -#define WAKE_FIFO_LEN 67 struct nvt_dev { struct pnp_dev *pdev; diff --git a/include/media/rc-core.h b/include/media/rc-core.h index 45534da5..df73d85 100644 --- a/include/media/rc-core.h +++ b/include/media/rc-core.h @@ -246,7 +246,6 @@ static inline void init_ir_raw_event(struct ir_raw_event *ev) #define US_TO_NS(usec) ((usec) * 1000) #define MS_TO_US(msec) ((msec) * 1000) #define MS_TO_NS(msec) ((msec) * 1000 * 1000) -#define NS_TO_US(nsec) DIV_ROUND_UP(nsec, 1000L) void ir_raw_event_handle(struct rc_dev *dev); int ir_raw_event_store(struct rc_dev *dev, struct ir_raw_event *ev); -- cgit v0.10.2 From 8abfebdb00fa8f2acb3923386e3cb1570d2c1d8e Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?David=20H=C3=A4rdeman?= Date: Mon, 20 Jul 2015 16:16:36 -0300 Subject: Revert "[media] rc: rc-loopback: Add loopback of filter scancodes" MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This reverts commit 2e4ebde269236da2a41183522127715b6d9d80ce. The current code is not mature enough, the API should allow a single protocol to be specified. Also, the current code contains heuristics that will depend on module load order. Signed-off-by: David Härdeman Acked-by: Antti Seppälä Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/rc/rc-loopback.c b/drivers/media/rc/rc-loopback.c index d8bdf63..63dace8 100644 --- a/drivers/media/rc/rc-loopback.c +++ b/drivers/media/rc/rc-loopback.c @@ -26,7 +26,6 @@ #include #include #include -#include #include #define DRIVER_NAME "rc-loopback" @@ -177,39 +176,6 @@ static int loop_set_carrier_report(struct rc_dev *dev, int enable) return 0; } -static int loop_set_wakeup_filter(struct rc_dev *dev, - struct rc_scancode_filter *sc_filter) -{ - static const unsigned int max = 512; - struct ir_raw_event *raw; - int ret; - int i; - - /* fine to disable filter */ - if (!sc_filter->mask) - return 0; - - /* encode the specified filter and loop it back */ - raw = kmalloc_array(max, sizeof(*raw), GFP_KERNEL); - ret = ir_raw_encode_scancode(dev->enabled_wakeup_protocols, sc_filter, - raw, max); - /* still loop back the partial raw IR even if it's incomplete */ - if (ret == -ENOBUFS) - ret = max; - if (ret >= 0) { - /* do the loopback */ - for (i = 0; i < ret; ++i) - ir_raw_event_store(dev, &raw[i]); - ir_raw_event_handle(dev); - - ret = 0; - } - - kfree(raw); - - return ret; -} - static int __init loop_init(void) { struct rc_dev *rc; @@ -229,7 +195,6 @@ static int __init loop_init(void) rc->map_name = RC_MAP_EMPTY; rc->priv = &loopdev; rc->driver_type = RC_DRIVER_IR_RAW; - rc->encode_wakeup = true; rc->allowed_protocols = RC_BIT_ALL; rc->timeout = 100 * 1000 * 1000; /* 100 ms */ rc->min_timeout = 1; @@ -244,7 +209,6 @@ static int __init loop_init(void) rc->s_idle = loop_set_idle; rc->s_learning_mode = loop_set_learning_mode; rc->s_carrier_report = loop_set_carrier_report; - rc->s_wakeup_filter = loop_set_wakeup_filter; loopdev.txmask = RXMASK_REGULAR; loopdev.txcarrier = 36000; -- cgit v0.10.2 From 3a03b86fdc1634e81d77f84e987c5a15426eff3d Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?David=20H=C3=A4rdeman?= Date: Mon, 20 Jul 2015 16:16:41 -0300 Subject: Revert "[media] rc: rc-core: Add support for encode_wakeup drivers" MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This reverts commit 0d830b2d1295fee82546d57185da5a6604f11ae2. The current code is not mature enough, the API should allow a single protocol to be specified. Also, the current code contains heuristics that will depend on module load order. Signed-off-by: David Härdeman Acked-by: Antti Seppälä Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/rc/rc-core-priv.h b/drivers/media/rc/rc-core-priv.h index 4b994aa..5266ecc7 100644 --- a/drivers/media/rc/rc-core-priv.h +++ b/drivers/media/rc/rc-core-priv.h @@ -189,7 +189,6 @@ int ir_raw_gen_manchester(struct ir_raw_event **ev, unsigned int max, * Routines from rc-raw.c to be used internally and by decoders */ u64 ir_raw_get_allowed_protocols(void); -u64 ir_raw_get_encode_protocols(void); int ir_raw_event_register(struct rc_dev *dev); void ir_raw_event_unregister(struct rc_dev *dev); int ir_raw_handler_register(struct ir_raw_handler *ir_raw_handler); diff --git a/drivers/media/rc/rc-ir-raw.c b/drivers/media/rc/rc-ir-raw.c index b9e4645..6c9580e 100644 --- a/drivers/media/rc/rc-ir-raw.c +++ b/drivers/media/rc/rc-ir-raw.c @@ -30,7 +30,6 @@ static LIST_HEAD(ir_raw_client_list); static DEFINE_MUTEX(ir_raw_handler_lock); static LIST_HEAD(ir_raw_handler_list); static u64 available_protocols; -static u64 encode_protocols; static int ir_raw_event_thread(void *data) { @@ -241,18 +240,6 @@ ir_raw_get_allowed_protocols(void) return protocols; } -/* used internally by the sysfs interface */ -u64 -ir_raw_get_encode_protocols(void) -{ - u64 protocols; - - mutex_lock(&ir_raw_handler_lock); - protocols = encode_protocols; - mutex_unlock(&ir_raw_handler_lock); - return protocols; -} - static int change_protocol(struct rc_dev *dev, u64 *rc_type) { /* the caller will update dev->enabled_protocols */ @@ -463,8 +450,6 @@ int ir_raw_handler_register(struct ir_raw_handler *ir_raw_handler) list_for_each_entry(raw, &ir_raw_client_list, list) ir_raw_handler->raw_register(raw->dev); available_protocols |= ir_raw_handler->protocols; - if (ir_raw_handler->encode) - encode_protocols |= ir_raw_handler->protocols; mutex_unlock(&ir_raw_handler_lock); return 0; @@ -481,8 +466,6 @@ void ir_raw_handler_unregister(struct ir_raw_handler *ir_raw_handler) list_for_each_entry(raw, &ir_raw_client_list, list) ir_raw_handler->raw_unregister(raw->dev); available_protocols &= ~ir_raw_handler->protocols; - if (ir_raw_handler->encode) - encode_protocols &= ~ir_raw_handler->protocols; mutex_unlock(&ir_raw_handler_lock); } EXPORT_SYMBOL(ir_raw_handler_unregister); diff --git a/drivers/media/rc/rc-main.c b/drivers/media/rc/rc-main.c index 9d015db..0ff388a 100644 --- a/drivers/media/rc/rc-main.c +++ b/drivers/media/rc/rc-main.c @@ -865,8 +865,6 @@ static ssize_t show_protocols(struct device *device, } else { enabled = dev->enabled_wakeup_protocols; allowed = dev->allowed_wakeup_protocols; - if (dev->encode_wakeup && !allowed) - allowed = ir_raw_get_encode_protocols(); } mutex_unlock(&dev->lock); @@ -1408,16 +1406,13 @@ int rc_register_device(struct rc_dev *dev) path ? path : "N/A"); kfree(path); - if (dev->driver_type == RC_DRIVER_IR_RAW || dev->encode_wakeup) { + if (dev->driver_type == RC_DRIVER_IR_RAW) { /* Load raw decoders, if they aren't already */ if (!raw_init) { IR_dprintk(1, "Loading raw decoders\n"); ir_raw_init(); raw_init = true; } - } - - if (dev->driver_type == RC_DRIVER_IR_RAW) { /* calls ir_register_device so unlock mutex here*/ mutex_unlock(&dev->lock); rc = ir_raw_event_register(dev); diff --git a/include/media/rc-core.h b/include/media/rc-core.h index df73d85..f0d0959 100644 --- a/include/media/rc-core.h +++ b/include/media/rc-core.h @@ -74,8 +74,6 @@ enum rc_filter_type { * @input_dev: the input child device used to communicate events to userspace * @driver_type: specifies if protocol decoding is done in hardware or software * @idle: used to keep track of RX state - * @encode_wakeup: wakeup filtering uses IR encode API, therefore the allowed - * wakeup protocols is the set of all raw encoders * @allowed_protocols: bitmask with the supported RC_BIT_* protocols * @enabled_protocols: bitmask with the enabled RC_BIT_* protocols * @allowed_wakeup_protocols: bitmask with the supported RC_BIT_* wakeup protocols @@ -136,7 +134,6 @@ struct rc_dev { struct input_dev *input_dev; enum rc_driver_type driver_type; bool idle; - bool encode_wakeup; u64 allowed_protocols; u64 enabled_protocols; u64 allowed_wakeup_protocols; -- cgit v0.10.2 From 70e7112e7d22ac5077ede777917cb057c1950ed7 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?David=20H=C3=A4rdeman?= Date: Mon, 20 Jul 2015 16:16:46 -0300 Subject: Revert "[media] rc: ir-rc6-decoder: Add encode capability" MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This reverts commit cf257e288ad3a134d4bb809c542a3ae6c87ddfa3. The current code is not mature enough, the API should allow a single protocol to be specified. Also, the current code contains heuristics that will depend on module load order. Signed-off-by: David Härdeman Acked-by: Antti Seppälä Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/rc/ir-rc6-decoder.c b/drivers/media/rc/ir-rc6-decoder.c index f9c70ba..d16bc67 100644 --- a/drivers/media/rc/ir-rc6-decoder.c +++ b/drivers/media/rc/ir-rc6-decoder.c @@ -291,133 +291,11 @@ out: return -EINVAL; } -static struct ir_raw_timings_manchester ir_rc6_timings[4] = { - { - .leader = RC6_PREFIX_PULSE, - .pulse_space_start = 0, - .clock = RC6_UNIT, - .invert = 1, - .trailer_space = RC6_PREFIX_SPACE, - }, - { - .clock = RC6_UNIT, - .invert = 1, - }, - { - .clock = RC6_UNIT * 2, - .invert = 1, - }, - { - .clock = RC6_UNIT, - .invert = 1, - .trailer_space = RC6_SUFFIX_SPACE, - }, -}; - -static int ir_rc6_validate_filter(const struct rc_scancode_filter *scancode, - unsigned int important_bits) -{ - /* all important bits of scancode should be set in mask */ - if (~scancode->mask & important_bits) - return -EINVAL; - /* extra bits in mask should be zero in data */ - if (scancode->mask & scancode->data & ~important_bits) - return -EINVAL; - return 0; -} - -/** - * ir_rc6_encode() - Encode a scancode as a stream of raw events - * - * @protocols: allowed protocols - * @scancode: scancode filter describing scancode (helps distinguish between - * protocol subtypes when scancode is ambiguous) - * @events: array of raw ir events to write into - * @max: maximum size of @events - * - * Returns: The number of events written. - * -ENOBUFS if there isn't enough space in the array to fit the - * encoding. In this case all @max events will have been written. - * -EINVAL if the scancode is ambiguous or invalid. - */ -static int ir_rc6_encode(u64 protocols, - const struct rc_scancode_filter *scancode, - struct ir_raw_event *events, unsigned int max) -{ - int ret; - struct ir_raw_event *e = events; - - if (protocols & RC_BIT_RC6_0 && - !ir_rc6_validate_filter(scancode, 0xffff)) { - - /* Modulate the preamble */ - ret = ir_raw_gen_manchester(&e, max, &ir_rc6_timings[0], 0, 0); - if (ret < 0) - return ret; - - /* Modulate the header (Start Bit & Mode-0) */ - ret = ir_raw_gen_manchester(&e, max - (e - events), - &ir_rc6_timings[1], - RC6_HEADER_NBITS, (1 << 3)); - if (ret < 0) - return ret; - - /* Modulate Trailer Bit */ - ret = ir_raw_gen_manchester(&e, max - (e - events), - &ir_rc6_timings[2], 1, 0); - if (ret < 0) - return ret; - - /* Modulate rest of the data */ - ret = ir_raw_gen_manchester(&e, max - (e - events), - &ir_rc6_timings[3], RC6_0_NBITS, - scancode->data); - if (ret < 0) - return ret; - - } else if (protocols & (RC_BIT_RC6_6A_20 | RC_BIT_RC6_6A_24 | - RC_BIT_RC6_6A_32 | RC_BIT_RC6_MCE) && - !ir_rc6_validate_filter(scancode, 0x8fffffff)) { - - /* Modulate the preamble */ - ret = ir_raw_gen_manchester(&e, max, &ir_rc6_timings[0], 0, 0); - if (ret < 0) - return ret; - - /* Modulate the header (Start Bit & Header-version 6 */ - ret = ir_raw_gen_manchester(&e, max - (e - events), - &ir_rc6_timings[1], - RC6_HEADER_NBITS, (1 << 3 | 6)); - if (ret < 0) - return ret; - - /* Modulate Trailer Bit */ - ret = ir_raw_gen_manchester(&e, max - (e - events), - &ir_rc6_timings[2], 1, 0); - if (ret < 0) - return ret; - - /* Modulate rest of the data */ - ret = ir_raw_gen_manchester(&e, max - (e - events), - &ir_rc6_timings[3], - fls(scancode->mask), - scancode->data); - if (ret < 0) - return ret; - - } else { - return -EINVAL; - } - - return e - events; -} - static struct ir_raw_handler rc6_handler = { .protocols = RC_BIT_RC6_0 | RC_BIT_RC6_6A_20 | RC_BIT_RC6_6A_24 | RC_BIT_RC6_6A_32 | RC_BIT_RC6_MCE, .decode = ir_rc6_decode, - .encode = ir_rc6_encode, }; static int __init ir_rc6_decode_init(void) -- cgit v0.10.2 From e49b361d4f73cee46e35319c3b7265f414689052 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?David=20H=C3=A4rdeman?= Date: Mon, 20 Jul 2015 16:16:51 -0300 Subject: Revert "[media] rc: ir-rc5-decoder: Add encode capability" MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This reverts commit a0466f15b4654cf1ac9e387d7c1a401eff494b4f. The current code is not mature enough, the API should allow a single protocol to be specified. Also, the current code contains heuristics that will depend on module load order. Signed-off-by: David Härdeman Acked-by: Antti Seppälä Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/rc/ir-rc5-decoder.c b/drivers/media/rc/ir-rc5-decoder.c index 8939ebd..84fa6e9 100644 --- a/drivers/media/rc/ir-rc5-decoder.c +++ b/drivers/media/rc/ir-rc5-decoder.c @@ -184,125 +184,9 @@ out: return -EINVAL; } -static struct ir_raw_timings_manchester ir_rc5_timings = { - .leader = RC5_UNIT, - .pulse_space_start = 0, - .clock = RC5_UNIT, - .trailer_space = RC5_UNIT * 10, -}; - -static struct ir_raw_timings_manchester ir_rc5x_timings[2] = { - { - .leader = RC5_UNIT, - .pulse_space_start = 0, - .clock = RC5_UNIT, - .trailer_space = RC5X_SPACE, - }, - { - .clock = RC5_UNIT, - .trailer_space = RC5_UNIT * 10, - }, -}; - -static struct ir_raw_timings_manchester ir_rc5_sz_timings = { - .leader = RC5_UNIT, - .pulse_space_start = 0, - .clock = RC5_UNIT, - .trailer_space = RC5_UNIT * 10, -}; - -static int ir_rc5_validate_filter(const struct rc_scancode_filter *scancode, - unsigned int important_bits) -{ - /* all important bits of scancode should be set in mask */ - if (~scancode->mask & important_bits) - return -EINVAL; - /* extra bits in mask should be zero in data */ - if (scancode->mask & scancode->data & ~important_bits) - return -EINVAL; - return 0; -} - -/** - * ir_rc5_encode() - Encode a scancode as a stream of raw events - * - * @protocols: allowed protocols - * @scancode: scancode filter describing scancode (helps distinguish between - * protocol subtypes when scancode is ambiguous) - * @events: array of raw ir events to write into - * @max: maximum size of @events - * - * Returns: The number of events written. - * -ENOBUFS if there isn't enough space in the array to fit the - * encoding. In this case all @max events will have been written. - * -EINVAL if the scancode is ambiguous or invalid. - */ -static int ir_rc5_encode(u64 protocols, - const struct rc_scancode_filter *scancode, - struct ir_raw_event *events, unsigned int max) -{ - int ret; - struct ir_raw_event *e = events; - unsigned int data, xdata, command, commandx, system; - - /* Detect protocol and convert scancode to raw data */ - if (protocols & RC_BIT_RC5 && - !ir_rc5_validate_filter(scancode, 0x1f7f)) { - /* decode scancode */ - command = (scancode->data & 0x003f) >> 0; - commandx = (scancode->data & 0x0040) >> 6; - system = (scancode->data & 0x1f00) >> 8; - /* encode data */ - data = !commandx << 12 | system << 6 | command; - - /* Modulate the data */ - ret = ir_raw_gen_manchester(&e, max, &ir_rc5_timings, RC5_NBITS, - data); - if (ret < 0) - return ret; - } else if (protocols & RC_BIT_RC5X && - !ir_rc5_validate_filter(scancode, 0x1f7f3f)) { - /* decode scancode */ - xdata = (scancode->data & 0x00003f) >> 0; - command = (scancode->data & 0x003f00) >> 8; - commandx = (scancode->data & 0x004000) >> 14; - system = (scancode->data & 0x1f0000) >> 16; - /* commandx and system overlap, bits must match when encoded */ - if (commandx == (system & 0x1)) - return -EINVAL; - /* encode data */ - data = 1 << 18 | system << 12 | command << 6 | xdata; - - /* Modulate the data */ - ret = ir_raw_gen_manchester(&e, max, &ir_rc5x_timings[0], - CHECK_RC5X_NBITS, - data >> (RC5X_NBITS-CHECK_RC5X_NBITS)); - if (ret < 0) - return ret; - ret = ir_raw_gen_manchester(&e, max - (e - events), - &ir_rc5x_timings[1], - RC5X_NBITS - CHECK_RC5X_NBITS, - data); - if (ret < 0) - return ret; - } else if (protocols & RC_BIT_RC5_SZ && - !ir_rc5_validate_filter(scancode, 0x2fff)) { - /* RC5-SZ scancode is raw enough for Manchester as it is */ - ret = ir_raw_gen_manchester(&e, max, &ir_rc5_sz_timings, - RC5_SZ_NBITS, scancode->data & 0x2fff); - if (ret < 0) - return ret; - } else { - return -EINVAL; - } - - return e - events; -} - static struct ir_raw_handler rc5_handler = { .protocols = RC_BIT_RC5 | RC_BIT_RC5X | RC_BIT_RC5_SZ, .decode = ir_rc5_decode, - .encode = ir_rc5_encode, }; static int __init ir_rc5_decode_init(void) -- cgit v0.10.2 From 86f216640ed58718553e826dc8d4ee419ad2a6b4 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?David=20H=C3=A4rdeman?= Date: Mon, 20 Jul 2015 16:16:56 -0300 Subject: Revert "[media] rc: rc-ir-raw: Add Manchester encoder (phase encoder) helper" MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This reverts commit 1d971d927efa2e10194c96ed0475b6d6054342d8. The current code is not mature enough, the API should allow a single protocol to be specified. Also, the current code contains heuristics that will depend on module load order. Signed-off-by: David Härdeman Acked-by: Antti Seppälä Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/rc/rc-core-priv.h b/drivers/media/rc/rc-core-priv.h index 5266ecc7..122c25f 100644 --- a/drivers/media/rc/rc-core-priv.h +++ b/drivers/media/rc/rc-core-priv.h @@ -152,39 +152,6 @@ static inline bool is_timing_event(struct ir_raw_event ev) #define TO_US(duration) DIV_ROUND_CLOSEST((duration), 1000) #define TO_STR(is_pulse) ((is_pulse) ? "pulse" : "space") -/* functions for IR encoders */ - -static inline void init_ir_raw_event_duration(struct ir_raw_event *ev, - unsigned int pulse, - u32 duration) -{ - init_ir_raw_event(ev); - ev->duration = duration; - ev->pulse = pulse; -} - -/** - * struct ir_raw_timings_manchester - Manchester coding timings - * @leader: duration of leader pulse (if any) 0 if continuing - * existing signal (see @pulse_space_start) - * @pulse_space_start: 1 for starting with pulse (0 for starting with space) - * @clock: duration of each pulse/space in ns - * @invert: if set clock logic is inverted - * (0 = space + pulse, 1 = pulse + space) - * @trailer_space: duration of trailer space in ns - */ -struct ir_raw_timings_manchester { - unsigned int leader; - unsigned int pulse_space_start:1; - unsigned int clock; - unsigned int invert:1; - unsigned int trailer_space; -}; - -int ir_raw_gen_manchester(struct ir_raw_event **ev, unsigned int max, - const struct ir_raw_timings_manchester *timings, - unsigned int n, unsigned int data); - /* * Routines from rc-raw.c to be used internally and by decoders */ diff --git a/drivers/media/rc/rc-ir-raw.c b/drivers/media/rc/rc-ir-raw.c index 6c9580e..dd47fe5 100644 --- a/drivers/media/rc/rc-ir-raw.c +++ b/drivers/media/rc/rc-ir-raw.c @@ -247,91 +247,6 @@ static int change_protocol(struct rc_dev *dev, u64 *rc_type) } /** - * ir_raw_gen_manchester() - Encode data with Manchester (bi-phase) modulation. - * @ev: Pointer to pointer to next free event. *@ev is incremented for - * each raw event filled. - * @max: Maximum number of raw events to fill. - * @timings: Manchester modulation timings. - * @n: Number of bits of data. - * @data: Data bits to encode. - * - * Encodes the @n least significant bits of @data using Manchester (bi-phase) - * modulation with the timing characteristics described by @timings, writing up - * to @max raw IR events using the *@ev pointer. - * - * Returns: 0 on success. - * -ENOBUFS if there isn't enough space in the array to fit the - * full encoded data. In this case all @max events will have been - * written. - */ -int ir_raw_gen_manchester(struct ir_raw_event **ev, unsigned int max, - const struct ir_raw_timings_manchester *timings, - unsigned int n, unsigned int data) -{ - bool need_pulse; - unsigned int i; - int ret = -ENOBUFS; - - i = 1 << (n - 1); - - if (timings->leader) { - if (!max--) - return ret; - if (timings->pulse_space_start) { - init_ir_raw_event_duration((*ev)++, 1, timings->leader); - - if (!max--) - return ret; - init_ir_raw_event_duration((*ev), 0, timings->leader); - } else { - init_ir_raw_event_duration((*ev), 1, timings->leader); - } - i >>= 1; - } else { - /* continue existing signal */ - --(*ev); - } - /* from here on *ev will point to the last event rather than the next */ - - while (n && i > 0) { - need_pulse = !(data & i); - if (timings->invert) - need_pulse = !need_pulse; - if (need_pulse == !!(*ev)->pulse) { - (*ev)->duration += timings->clock; - } else { - if (!max--) - goto nobufs; - init_ir_raw_event_duration(++(*ev), need_pulse, - timings->clock); - } - - if (!max--) - goto nobufs; - init_ir_raw_event_duration(++(*ev), !need_pulse, - timings->clock); - i >>= 1; - } - - if (timings->trailer_space) { - if (!(*ev)->pulse) - (*ev)->duration += timings->trailer_space; - else if (!max--) - goto nobufs; - else - init_ir_raw_event_duration(++(*ev), 0, - timings->trailer_space); - } - - ret = 0; -nobufs: - /* point to the next event rather than last event before returning */ - ++(*ev); - return ret; -} -EXPORT_SYMBOL(ir_raw_gen_manchester); - -/** * ir_raw_encode_scancode() - Encode a scancode as raw events * * @protocols: permitted protocols -- cgit v0.10.2 From 72c5b7b24f3800bf8b1b1c78511c6da09d33c590 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?David=20H=C3=A4rdeman?= Date: Mon, 20 Jul 2015 16:17:01 -0300 Subject: Revert "[media] rc: rc-ir-raw: Add scancode encoder callback" MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This reverts commit 9869da5bacc5c9b865a183bd36c04be76cdd325d. The current code is not mature enough, the API should allow a single protocol to be specified. Also, the current code contains heuristics that will depend on module load order. Signed-off-by: David Härdeman Acked-by: Antti Seppälä Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/rc/rc-core-priv.h b/drivers/media/rc/rc-core-priv.h index 122c25f..b68d4f76 100644 --- a/drivers/media/rc/rc-core-priv.h +++ b/drivers/media/rc/rc-core-priv.h @@ -25,8 +25,6 @@ struct ir_raw_handler { u64 protocols; /* which are handled by this handler */ int (*decode)(struct rc_dev *dev, struct ir_raw_event event); - int (*encode)(u64 protocols, const struct rc_scancode_filter *scancode, - struct ir_raw_event *events, unsigned int max); /* These two should only be used by the lirc decoder */ int (*raw_register)(struct rc_dev *dev); diff --git a/drivers/media/rc/rc-ir-raw.c b/drivers/media/rc/rc-ir-raw.c index dd47fe5..b732ac6 100644 --- a/drivers/media/rc/rc-ir-raw.c +++ b/drivers/media/rc/rc-ir-raw.c @@ -246,43 +246,6 @@ static int change_protocol(struct rc_dev *dev, u64 *rc_type) return 0; } -/** - * ir_raw_encode_scancode() - Encode a scancode as raw events - * - * @protocols: permitted protocols - * @scancode: scancode filter describing a single scancode - * @events: array of raw events to write into - * @max: max number of raw events - * - * Attempts to encode the scancode as raw events. - * - * Returns: The number of events written. - * -ENOBUFS if there isn't enough space in the array to fit the - * encoding. In this case all @max events will have been written. - * -EINVAL if the scancode is ambiguous or invalid, or if no - * compatible encoder was found. - */ -int ir_raw_encode_scancode(u64 protocols, - const struct rc_scancode_filter *scancode, - struct ir_raw_event *events, unsigned int max) -{ - struct ir_raw_handler *handler; - int ret = -EINVAL; - - mutex_lock(&ir_raw_handler_lock); - list_for_each_entry(handler, &ir_raw_handler_list, list) { - if (handler->protocols & protocols && handler->encode) { - ret = handler->encode(protocols, scancode, events, max); - if (ret >= 0 || ret == -ENOBUFS) - break; - } - } - mutex_unlock(&ir_raw_handler_lock); - - return ret; -} -EXPORT_SYMBOL(ir_raw_encode_scancode); - /* * Used to (un)register raw event clients */ diff --git a/include/media/rc-core.h b/include/media/rc-core.h index f0d0959..644bdc6 100644 --- a/include/media/rc-core.h +++ b/include/media/rc-core.h @@ -250,9 +250,6 @@ int ir_raw_event_store_edge(struct rc_dev *dev, enum raw_event_type type); int ir_raw_event_store_with_filter(struct rc_dev *dev, struct ir_raw_event *ev); void ir_raw_event_set_idle(struct rc_dev *dev, bool idle); -int ir_raw_encode_scancode(u64 protocols, - const struct rc_scancode_filter *scancode, - struct ir_raw_event *events, unsigned int max); static inline void ir_raw_event_reset(struct rc_dev *dev) { -- cgit v0.10.2 From 02387b5f25bdba668c7fe2618697bae24f973667 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Mon, 10 Aug 2015 14:11:41 -0300 Subject: [media] mantis: Fix error handling in mantis_dma_init() Current code assigns 0 to variable 'err', which makes mantis_dma_init() to return success even if mantis_alloc_buffers() fails. Fix it by checking the return value from mantis_alloc_buffers() and propagating it in the case of error. Reported-by: RUC_Soft_Sec Signed-off-by: Fabio Estevam Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/pci/mantis/mantis_dma.c b/drivers/media/pci/mantis/mantis_dma.c index 1d59c7e..87990ec 100644 --- a/drivers/media/pci/mantis/mantis_dma.c +++ b/drivers/media/pci/mantis/mantis_dma.c @@ -130,10 +130,11 @@ err: int mantis_dma_init(struct mantis_pci *mantis) { - int err = 0; + int err; dprintk(MANTIS_DEBUG, 1, "Mantis DMA init"); - if (mantis_alloc_buffers(mantis) < 0) { + err = mantis_alloc_buffers(mantis); + if (err < 0) { dprintk(MANTIS_ERROR, 1, "Error allocating DMA buffer"); /* Stop RISC Engine */ -- cgit v0.10.2