From 0830c9802e33d8c94b9b2f89b3db4aae92e55bf6 Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Thu, 9 Jun 2016 18:23:54 -0700 Subject: net: dsa: b53: Add BCM7445 quirk The Broadcom BCM7445 STB chip has an issued in its revision D0 which was previously worked around in drivers/net/dsa/bcm_sf2.c where we may end-up double programming the integrated BCM7445 switch (bcm_sf2) and an external Broadcom switch such as BCM53125, since these are mostly register compatible. Add a small quirk which just defers probing until we are sitting on the slave DSA MDIO bus, which will allow us to intercept reads/writes and funnel them through the SF2 internal MDIO master (which happens to disconnect its pseudo PHY). Signed-off-by: Florian Fainelli Signed-off-by: David S. Miller diff --git a/drivers/net/dsa/b53/b53_mdio.c b/drivers/net/dsa/b53/b53_mdio.c index c6cf7cf..aa87c3f 100644 --- a/drivers/net/dsa/b53/b53_mdio.c +++ b/drivers/net/dsa/b53/b53_mdio.c @@ -316,6 +316,17 @@ static int b53_mdio_probe(struct mdio_device *mdiodev) return -ENODEV; } + /* First probe will come from SWITCH_MDIO controller on the 7445D0 + * switch, which will conflict with the 7445 integrated switch + * pseudo-phy (we end-up programming both). In that case, we return + * -EPROBE_DEFER for the first time we get here, and wait until we come + * back with the slave MDIO bus which has the correct indirection + * layer setup + */ + if (of_machine_is_compatible("brcm,bcm7445d0") && + strcmp(mdiodev->bus->name, "sf2 slave mii")) + return -EPROBE_DEFER; + dev = b53_switch_alloc(&mdiodev->dev, &b53_mdio_ops, mdiodev->bus); if (!dev) return -ENOMEM; -- cgit v0.10.2