From a007ddbaef5317f76bec541688e304f31ad9c4b0 Mon Sep 17 00:00:00 2001 From: Marek Szyprowski Date: Fri, 21 Aug 2015 14:38:37 +0200 Subject: phy: exynos-usb2: add vbus regulator support Exynos USB2 PHY has separate power supply, which is usually provided by VBUS regulator. This patch adds support for it. VBUS regulator is optional, to keep compatibility with boards, which have VBUS provided from some always-on power source. Signed-off-by: Marek Szyprowski Tested-by: Krzysztof Kozlowski Signed-off-by: Kishon Vijay Abraham I diff --git a/Documentation/devicetree/bindings/phy/samsung-phy.txt b/Documentation/devicetree/bindings/phy/samsung-phy.txt index 60c6f2a..0289d3b 100644 --- a/Documentation/devicetree/bindings/phy/samsung-phy.txt +++ b/Documentation/devicetree/bindings/phy/samsung-phy.txt @@ -44,6 +44,9 @@ Required properties: - the "ref" clock is used to get the rate of the clock provided to the PHY module +Optional properties: +- vbus-supply: power-supply phandle for vbus power source + The first phandle argument in the PHY specifier identifies the PHY, its meaning is compatible dependent. For the currently supported SoCs (Exynos 4210 and Exynos 4212) it is as follows: diff --git a/drivers/phy/phy-samsung-usb2.c b/drivers/phy/phy-samsung-usb2.c index f278a9c..1d22d93 100644 --- a/drivers/phy/phy-samsung-usb2.c +++ b/drivers/phy/phy-samsung-usb2.c @@ -27,6 +27,13 @@ static int samsung_usb2_phy_power_on(struct phy *phy) dev_dbg(drv->dev, "Request to power_on \"%s\" usb phy\n", inst->cfg->label); + + if (drv->vbus) { + ret = regulator_enable(drv->vbus); + if (ret) + goto err_regulator; + } + ret = clk_prepare_enable(drv->clk); if (ret) goto err_main_clk; @@ -48,6 +55,9 @@ err_power_on: err_instance_clk: clk_disable_unprepare(drv->clk); err_main_clk: + if (drv->vbus) + regulator_disable(drv->vbus); +err_regulator: return ret; } @@ -55,7 +65,7 @@ static int samsung_usb2_phy_power_off(struct phy *phy) { struct samsung_usb2_phy_instance *inst = phy_get_drvdata(phy); struct samsung_usb2_phy_driver *drv = inst->drv; - int ret; + int ret = 0; dev_dbg(drv->dev, "Request to power_off \"%s\" usb phy\n", inst->cfg->label); @@ -68,7 +78,10 @@ static int samsung_usb2_phy_power_off(struct phy *phy) } clk_disable_unprepare(drv->ref_clk); clk_disable_unprepare(drv->clk); - return 0; + if (drv->vbus) + ret = regulator_disable(drv->vbus); + + return ret; } static const struct phy_ops samsung_usb2_phy_ops = { @@ -203,6 +216,14 @@ static int samsung_usb2_phy_probe(struct platform_device *pdev) return ret; } + drv->vbus = devm_regulator_get(dev, "vbus"); + if (IS_ERR(drv->vbus)) { + ret = PTR_ERR(drv->vbus); + if (ret == -EPROBE_DEFER) + return ret; + drv->vbus = NULL; + } + for (i = 0; i < drv->cfg->num_phys; i++) { char *label = drv->cfg->phys[i].label; struct samsung_usb2_phy_instance *p = &drv->instances[i]; diff --git a/drivers/phy/phy-samsung-usb2.h b/drivers/phy/phy-samsung-usb2.h index 44bead9..6563e7c 100644 --- a/drivers/phy/phy-samsung-usb2.h +++ b/drivers/phy/phy-samsung-usb2.h @@ -17,6 +17,7 @@ #include #include #include +#include #define KHZ 1000 #define MHZ (KHZ * KHZ) @@ -37,6 +38,7 @@ struct samsung_usb2_phy_driver { const struct samsung_usb2_phy_config *cfg; struct clk *clk; struct clk *ref_clk; + struct regulator *vbus; unsigned long ref_rate; u32 ref_reg_val; struct device *dev; -- cgit v0.10.2 From 538b2a4e96990a4839086cc47b657a12b1364d3c Mon Sep 17 00:00:00 2001 From: Chunfeng Yun Date: Tue, 29 Sep 2015 11:01:34 +0800 Subject: dt-bindings: Add usb3.0 phy binding for MT65xx SoCs add a DT binding documentation of usb3.0 phy for MT65xx SoCs from Mediatek. Acked-by: Rob Herring Signed-off-by: Chunfeng Yun Signed-off-by: Kishon Vijay Abraham I diff --git a/Documentation/devicetree/bindings/phy/phy-mt65xx-usb.txt b/Documentation/devicetree/bindings/phy/phy-mt65xx-usb.txt new file mode 100644 index 0000000..00100cf --- /dev/null +++ b/Documentation/devicetree/bindings/phy/phy-mt65xx-usb.txt @@ -0,0 +1,68 @@ +mt65xx USB3.0 PHY binding +-------------------------- + +This binding describes a usb3.0 phy for mt65xx platforms of Medaitek SoC. + +Required properties (controller (parent) node): + - compatible : should be "mediatek,mt8173-u3phy" + - reg : offset and length of register for phy, exclude port's + register. + - clocks : a list of phandle + clock-specifier pairs, one for each + entry in clock-names + - clock-names : must contain + "u3phya_ref": for reference clock of usb3.0 analog phy. + +Required nodes : a sub-node is required for each port the controller + provides. Address range information including the usual + 'reg' property is used inside these nodes to describe + the controller's topology. + +Required properties (port (child) node): +- reg : address and length of the register set for the port. +- #phy-cells : should be 1 (See second example) + cell after port phandle is phy type from: + - PHY_TYPE_USB2 + - PHY_TYPE_USB3 + +Example: + +u3phy: usb-phy@11290000 { + compatible = "mediatek,mt8173-u3phy"; + reg = <0 0x11290000 0 0x800>; + clocks = <&apmixedsys CLK_APMIXED_REF2USB_TX>; + clock-names = "u3phya_ref"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + status = "okay"; + + phy_port0: port@11290800 { + reg = <0 0x11290800 0 0x800>; + #phy-cells = <1>; + status = "okay"; + }; + + phy_port1: port@11291000 { + reg = <0 0x11291000 0 0x800>; + #phy-cells = <1>; + status = "okay"; + }; +}; + +Specifying phy control of devices +--------------------------------- + +Device nodes should specify the configuration required in their "phys" +property, containing a phandle to the phy port node and a device type; +phy-names for each port are optional. + +Example: + +#include + +usb30: usb@11270000 { + ... + phys = <&phy_port0 PHY_TYPE_USB3>; + phy-names = "usb3-0"; + ... +}; -- cgit v0.10.2 From dc7f190fd51f5c64d7d9280e5f052b46ce8cee24 Mon Sep 17 00:00:00 2001 From: Chunfeng Yun Date: Tue, 29 Sep 2015 11:01:36 +0800 Subject: phy: add usb3.0 phy driver for mt65xx SoCs support usb3.0 phy of mt65xx SoCs Signed-off-by: Chunfeng Yun Signed-off-by: Kishon Vijay Abraham I diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig index 47da573..ec436c1 100644 --- a/drivers/phy/Kconfig +++ b/drivers/phy/Kconfig @@ -206,6 +206,15 @@ config PHY_HIX5HD2_SATA help Support for SATA PHY on Hisilicon hix5hd2 Soc. +config PHY_MT65XX_USB3 + tristate "Mediatek USB3.0 PHY Driver" + depends on ARCH_MEDIATEK && OF + select GENERIC_PHY + help + Say 'Y' here to add support for Mediatek USB3.0 PHY driver + for mt65xx SoCs. it supports two usb2.0 ports and + one usb3.0 port. + config PHY_SUN4I_USB tristate "Allwinner sunxi SoC USB PHY driver" depends on ARCH_SUNXI && HAS_IOMEM && OF diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile index a5b18c1..a7cc629 100644 --- a/drivers/phy/Makefile +++ b/drivers/phy/Makefile @@ -23,6 +23,7 @@ obj-$(CONFIG_TI_PIPE3) += phy-ti-pipe3.o obj-$(CONFIG_TWL4030_USB) += phy-twl4030-usb.o obj-$(CONFIG_PHY_EXYNOS5250_SATA) += phy-exynos5250-sata.o obj-$(CONFIG_PHY_HIX5HD2_SATA) += phy-hix5hd2-sata.o +obj-$(CONFIG_PHY_MT65XX_USB3) += phy-mt65xx-usb3.o obj-$(CONFIG_PHY_SUN4I_USB) += phy-sun4i-usb.o obj-$(CONFIG_PHY_SUN9I_USB) += phy-sun9i-usb.o obj-$(CONFIG_PHY_SAMSUNG_USB2) += phy-exynos-usb2.o diff --git a/drivers/phy/phy-mt65xx-usb3.c b/drivers/phy/phy-mt65xx-usb3.c new file mode 100644 index 0000000..f30b28b --- /dev/null +++ b/drivers/phy/phy-mt65xx-usb3.c @@ -0,0 +1,506 @@ +/* + * Copyright (c) 2015 MediaTek Inc. + * Author: Chunfeng Yun + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +/* + * for sifslv2 register, but exclude port's; + * relative to USB3_SIF2_BASE base address + */ +#define SSUSB_SIFSLV_SPLLC 0x0000 + +/* offsets of sub-segment in each port registers */ +#define SSUSB_SIFSLV_U2PHY_COM_BASE 0x0000 +#define SSUSB_SIFSLV_U3PHYD_BASE 0x0100 +#define SSUSB_USB30_PHYA_SIV_B_BASE 0x0300 +#define SSUSB_SIFSLV_U3PHYA_DA_BASE 0x0400 + +#define U3P_USBPHYACR0 (SSUSB_SIFSLV_U2PHY_COM_BASE + 0x0000) +#define PA0_RG_U2PLL_FORCE_ON BIT(15) + +#define U3P_USBPHYACR2 (SSUSB_SIFSLV_U2PHY_COM_BASE + 0x0008) +#define PA2_RG_SIF_U2PLL_FORCE_EN BIT(18) + +#define U3P_USBPHYACR5 (SSUSB_SIFSLV_U2PHY_COM_BASE + 0x0014) +#define PA5_RG_U2_HSTX_SRCTRL GENMASK(14, 12) +#define PA5_RG_U2_HSTX_SRCTRL_VAL(x) ((0x7 & (x)) << 12) +#define PA5_RG_U2_HS_100U_U3_EN BIT(11) + +#define U3P_USBPHYACR6 (SSUSB_SIFSLV_U2PHY_COM_BASE + 0x0018) +#define PA6_RG_U2_ISO_EN BIT(31) +#define PA6_RG_U2_BC11_SW_EN BIT(23) +#define PA6_RG_U2_OTG_VBUSCMP_EN BIT(20) + +#define U3P_U2PHYACR4 (SSUSB_SIFSLV_U2PHY_COM_BASE + 0x0020) +#define P2C_RG_USB20_GPIO_CTL BIT(9) +#define P2C_USB20_GPIO_MODE BIT(8) +#define P2C_U2_GPIO_CTR_MSK (P2C_RG_USB20_GPIO_CTL | P2C_USB20_GPIO_MODE) + +#define U3D_U2PHYDCR0 (SSUSB_SIFSLV_U2PHY_COM_BASE + 0x0060) +#define P2C_RG_SIF_U2PLL_FORCE_ON BIT(24) + +#define U3P_U2PHYDTM0 (SSUSB_SIFSLV_U2PHY_COM_BASE + 0x0068) +#define P2C_FORCE_UART_EN BIT(26) +#define P2C_FORCE_DATAIN BIT(23) +#define P2C_FORCE_DM_PULLDOWN BIT(21) +#define P2C_FORCE_DP_PULLDOWN BIT(20) +#define P2C_FORCE_XCVRSEL BIT(19) +#define P2C_FORCE_SUSPENDM BIT(18) +#define P2C_FORCE_TERMSEL BIT(17) +#define P2C_RG_DATAIN GENMASK(13, 10) +#define P2C_RG_DATAIN_VAL(x) ((0xf & (x)) << 10) +#define P2C_RG_DMPULLDOWN BIT(7) +#define P2C_RG_DPPULLDOWN BIT(6) +#define P2C_RG_XCVRSEL GENMASK(5, 4) +#define P2C_RG_XCVRSEL_VAL(x) ((0x3 & (x)) << 4) +#define P2C_RG_SUSPENDM BIT(3) +#define P2C_RG_TERMSEL BIT(2) +#define P2C_DTM0_PART_MASK \ + (P2C_FORCE_DATAIN | P2C_FORCE_DM_PULLDOWN | \ + P2C_FORCE_DP_PULLDOWN | P2C_FORCE_XCVRSEL | \ + P2C_FORCE_TERMSEL | P2C_RG_DMPULLDOWN | \ + P2C_RG_DPPULLDOWN | P2C_RG_TERMSEL) + +#define U3P_U2PHYDTM1 (SSUSB_SIFSLV_U2PHY_COM_BASE + 0x006C) +#define P2C_RG_UART_EN BIT(16) +#define P2C_RG_VBUSVALID BIT(5) +#define P2C_RG_SESSEND BIT(4) +#define P2C_RG_AVALID BIT(2) + +#define U3P_U3_PHYA_REG0 (SSUSB_USB30_PHYA_SIV_B_BASE + 0x0000) +#define P3A_RG_U3_VUSB10_ON BIT(5) + +#define U3P_U3_PHYA_REG6 (SSUSB_USB30_PHYA_SIV_B_BASE + 0x0018) +#define P3A_RG_TX_EIDLE_CM GENMASK(31, 28) +#define P3A_RG_TX_EIDLE_CM_VAL(x) ((0xf & (x)) << 28) + +#define U3P_U3_PHYA_REG9 (SSUSB_USB30_PHYA_SIV_B_BASE + 0x0024) +#define P3A_RG_RX_DAC_MUX GENMASK(5, 1) +#define P3A_RG_RX_DAC_MUX_VAL(x) ((0x1f & (x)) << 1) + +#define U3P_U3PHYA_DA_REG0 (SSUSB_SIFSLV_U3PHYA_DA_BASE + 0x0000) +#define P3A_RG_XTAL_EXT_EN_U3 GENMASK(11, 10) +#define P3A_RG_XTAL_EXT_EN_U3_VAL(x) ((0x3 & (x)) << 10) + +#define U3P_PHYD_CDR1 (SSUSB_SIFSLV_U3PHYD_BASE + 0x005c) +#define P3D_RG_CDR_BIR_LTD1 GENMASK(28, 24) +#define P3D_RG_CDR_BIR_LTD1_VAL(x) ((0x1f & (x)) << 24) +#define P3D_RG_CDR_BIR_LTD0 GENMASK(12, 8) +#define P3D_RG_CDR_BIR_LTD0_VAL(x) ((0x1f & (x)) << 8) + +#define U3P_XTALCTL3 (SSUSB_SIFSLV_SPLLC + 0x0018) +#define XC3_RG_U3_XTAL_RX_PWD BIT(9) +#define XC3_RG_U3_FRC_XTAL_RX_PWD BIT(8) + +struct mt65xx_phy_instance { + struct phy *phy; + void __iomem *port_base; + u32 index; + u8 type; +}; + +struct mt65xx_u3phy { + struct device *dev; + void __iomem *sif_base; /* include sif2, but exclude port's */ + struct clk *u3phya_ref; /* reference clock of usb3 anolog phy */ + struct mt65xx_phy_instance **phys; + int nphys; +}; + +static void phy_instance_init(struct mt65xx_u3phy *u3phy, + struct mt65xx_phy_instance *instance) +{ + void __iomem *port_base = instance->port_base; + u32 index = instance->index; + u32 tmp; + + /* switch to USB function. (system register, force ip into usb mode) */ + tmp = readl(port_base + U3P_U2PHYDTM0); + tmp &= ~P2C_FORCE_UART_EN; + tmp |= P2C_RG_XCVRSEL_VAL(1) | P2C_RG_DATAIN_VAL(0); + writel(tmp, port_base + U3P_U2PHYDTM0); + + tmp = readl(port_base + U3P_U2PHYDTM1); + tmp &= ~P2C_RG_UART_EN; + writel(tmp, port_base + U3P_U2PHYDTM1); + + if (!index) { + tmp = readl(port_base + U3P_U2PHYACR4); + tmp &= ~P2C_U2_GPIO_CTR_MSK; + writel(tmp, port_base + U3P_U2PHYACR4); + + tmp = readl(port_base + U3P_USBPHYACR2); + tmp |= PA2_RG_SIF_U2PLL_FORCE_EN; + writel(tmp, port_base + U3P_USBPHYACR2); + + tmp = readl(port_base + U3D_U2PHYDCR0); + tmp &= ~P2C_RG_SIF_U2PLL_FORCE_ON; + writel(tmp, port_base + U3D_U2PHYDCR0); + } else { + tmp = readl(port_base + U3D_U2PHYDCR0); + tmp |= P2C_RG_SIF_U2PLL_FORCE_ON; + writel(tmp, port_base + U3D_U2PHYDCR0); + + tmp = readl(port_base + U3P_U2PHYDTM0); + tmp |= P2C_RG_SUSPENDM | P2C_FORCE_SUSPENDM; + writel(tmp, port_base + U3P_U2PHYDTM0); + } + + /* DP/DM BC1.1 path Disable */ + tmp = readl(port_base + U3P_USBPHYACR6); + tmp &= ~PA6_RG_U2_BC11_SW_EN; + writel(tmp, port_base + U3P_USBPHYACR6); + + tmp = readl(port_base + U3P_U3PHYA_DA_REG0); + tmp &= ~P3A_RG_XTAL_EXT_EN_U3; + tmp |= P3A_RG_XTAL_EXT_EN_U3_VAL(2); + writel(tmp, port_base + U3P_U3PHYA_DA_REG0); + + tmp = readl(port_base + U3P_U3_PHYA_REG9); + tmp &= ~P3A_RG_RX_DAC_MUX; + tmp |= P3A_RG_RX_DAC_MUX_VAL(4); + writel(tmp, port_base + U3P_U3_PHYA_REG9); + + tmp = readl(port_base + U3P_U3_PHYA_REG6); + tmp &= ~P3A_RG_TX_EIDLE_CM; + tmp |= P3A_RG_TX_EIDLE_CM_VAL(0xe); + writel(tmp, port_base + U3P_U3_PHYA_REG6); + + tmp = readl(port_base + U3P_PHYD_CDR1); + tmp &= ~(P3D_RG_CDR_BIR_LTD0 | P3D_RG_CDR_BIR_LTD1); + tmp |= P3D_RG_CDR_BIR_LTD0_VAL(0xc) | P3D_RG_CDR_BIR_LTD1_VAL(0x3); + writel(tmp, port_base + U3P_PHYD_CDR1); + + dev_dbg(u3phy->dev, "%s(%d)\n", __func__, index); +} + +static void phy_instance_power_on(struct mt65xx_u3phy *u3phy, + struct mt65xx_phy_instance *instance) +{ + void __iomem *port_base = instance->port_base; + u32 index = instance->index; + u32 tmp; + + if (!index) { + /* Set RG_SSUSB_VUSB10_ON as 1 after VUSB10 ready */ + tmp = readl(port_base + U3P_U3_PHYA_REG0); + tmp |= P3A_RG_U3_VUSB10_ON; + writel(tmp, port_base + U3P_U3_PHYA_REG0); + } + + /* (force_suspendm=0) (let suspendm=1, enable usb 480MHz pll) */ + tmp = readl(port_base + U3P_U2PHYDTM0); + tmp &= ~(P2C_FORCE_SUSPENDM | P2C_RG_XCVRSEL); + tmp &= ~(P2C_RG_DATAIN | P2C_DTM0_PART_MASK); + writel(tmp, port_base + U3P_U2PHYDTM0); + + /* OTG Enable */ + tmp = readl(port_base + U3P_USBPHYACR6); + tmp |= PA6_RG_U2_OTG_VBUSCMP_EN; + writel(tmp, port_base + U3P_USBPHYACR6); + + if (!index) { + tmp = readl(u3phy->sif_base + U3P_XTALCTL3); + tmp |= XC3_RG_U3_XTAL_RX_PWD | XC3_RG_U3_FRC_XTAL_RX_PWD; + writel(tmp, u3phy->sif_base + U3P_XTALCTL3); + + /* [mt8173]disable Change 100uA current from SSUSB */ + tmp = readl(port_base + U3P_USBPHYACR5); + tmp &= ~PA5_RG_U2_HS_100U_U3_EN; + writel(tmp, port_base + U3P_USBPHYACR5); + } + + tmp = readl(port_base + U3P_U2PHYDTM1); + tmp |= P2C_RG_VBUSVALID | P2C_RG_AVALID; + tmp &= ~P2C_RG_SESSEND; + writel(tmp, port_base + U3P_U2PHYDTM1); + + /* USB 2.0 slew rate calibration */ + tmp = readl(port_base + U3P_USBPHYACR5); + tmp &= ~PA5_RG_U2_HSTX_SRCTRL; + tmp |= PA5_RG_U2_HSTX_SRCTRL_VAL(4); + writel(tmp, port_base + U3P_USBPHYACR5); + + if (index) { + tmp = readl(port_base + U3D_U2PHYDCR0); + tmp |= P2C_RG_SIF_U2PLL_FORCE_ON; + writel(tmp, port_base + U3D_U2PHYDCR0); + + tmp = readl(port_base + U3P_U2PHYDTM0); + tmp |= P2C_RG_SUSPENDM | P2C_FORCE_SUSPENDM; + writel(tmp, port_base + U3P_U2PHYDTM0); + } + dev_dbg(u3phy->dev, "%s(%d)\n", __func__, index); +} + +static void phy_instance_power_off(struct mt65xx_u3phy *u3phy, + struct mt65xx_phy_instance *instance) +{ + void __iomem *port_base = instance->port_base; + u32 index = instance->index; + u32 tmp; + + tmp = readl(port_base + U3P_U2PHYDTM0); + tmp &= ~(P2C_RG_XCVRSEL | P2C_RG_DATAIN); + tmp |= P2C_FORCE_SUSPENDM; + writel(tmp, port_base + U3P_U2PHYDTM0); + + /* OTG Disable */ + tmp = readl(port_base + U3P_USBPHYACR6); + tmp &= ~PA6_RG_U2_OTG_VBUSCMP_EN; + writel(tmp, port_base + U3P_USBPHYACR6); + + if (!index) { + /* (also disable)Change 100uA current switch to USB2.0 */ + tmp = readl(port_base + U3P_USBPHYACR5); + tmp &= ~PA5_RG_U2_HS_100U_U3_EN; + writel(tmp, port_base + U3P_USBPHYACR5); + } + + /* let suspendm=0, set utmi into analog power down */ + tmp = readl(port_base + U3P_U2PHYDTM0); + tmp &= ~P2C_RG_SUSPENDM; + writel(tmp, port_base + U3P_U2PHYDTM0); + udelay(1); + + tmp = readl(port_base + U3P_U2PHYDTM1); + tmp &= ~(P2C_RG_VBUSVALID | P2C_RG_AVALID); + tmp |= P2C_RG_SESSEND; + writel(tmp, port_base + U3P_U2PHYDTM1); + + if (!index) { + tmp = readl(port_base + U3P_U3_PHYA_REG0); + tmp &= ~P3A_RG_U3_VUSB10_ON; + writel(tmp, port_base + U3P_U3_PHYA_REG0); + } else { + tmp = readl(port_base + U3D_U2PHYDCR0); + tmp &= ~P2C_RG_SIF_U2PLL_FORCE_ON; + writel(tmp, port_base + U3D_U2PHYDCR0); + } + + dev_dbg(u3phy->dev, "%s(%d)\n", __func__, index); +} + +static void phy_instance_exit(struct mt65xx_u3phy *u3phy, + struct mt65xx_phy_instance *instance) +{ + void __iomem *port_base = instance->port_base; + u32 index = instance->index; + u32 tmp; + + if (index) { + tmp = readl(port_base + U3D_U2PHYDCR0); + tmp &= ~P2C_RG_SIF_U2PLL_FORCE_ON; + writel(tmp, port_base + U3D_U2PHYDCR0); + + tmp = readl(port_base + U3P_U2PHYDTM0); + tmp &= ~P2C_FORCE_SUSPENDM; + writel(tmp, port_base + U3P_U2PHYDTM0); + } +} + +static int mt65xx_phy_init(struct phy *phy) +{ + struct mt65xx_phy_instance *instance = phy_get_drvdata(phy); + struct mt65xx_u3phy *u3phy = dev_get_drvdata(phy->dev.parent); + int ret; + + ret = clk_prepare_enable(u3phy->u3phya_ref); + if (ret) { + dev_err(u3phy->dev, "failed to enable u3phya_ref\n"); + return ret; + } + + phy_instance_init(u3phy, instance); + return 0; +} + +static int mt65xx_phy_power_on(struct phy *phy) +{ + struct mt65xx_phy_instance *instance = phy_get_drvdata(phy); + struct mt65xx_u3phy *u3phy = dev_get_drvdata(phy->dev.parent); + + phy_instance_power_on(u3phy, instance); + return 0; +} + +static int mt65xx_phy_power_off(struct phy *phy) +{ + struct mt65xx_phy_instance *instance = phy_get_drvdata(phy); + struct mt65xx_u3phy *u3phy = dev_get_drvdata(phy->dev.parent); + + phy_instance_power_off(u3phy, instance); + return 0; +} + +static int mt65xx_phy_exit(struct phy *phy) +{ + struct mt65xx_phy_instance *instance = phy_get_drvdata(phy); + struct mt65xx_u3phy *u3phy = dev_get_drvdata(phy->dev.parent); + + phy_instance_exit(u3phy, instance); + clk_disable_unprepare(u3phy->u3phya_ref); + return 0; +} + +static struct phy *mt65xx_phy_xlate(struct device *dev, + struct of_phandle_args *args) +{ + struct mt65xx_u3phy *u3phy = dev_get_drvdata(dev); + struct mt65xx_phy_instance *instance = NULL; + struct device_node *phy_np = args->np; + int index; + + + if (args->args_count != 1) { + dev_err(dev, "invalid number of cells in 'phy' property\n"); + return ERR_PTR(-EINVAL); + } + + for (index = 0; index < u3phy->nphys; index++) + if (phy_np == u3phy->phys[index]->phy->dev.of_node) { + instance = u3phy->phys[index]; + break; + } + + if (!instance) { + dev_err(dev, "failed to find appropriate phy\n"); + return ERR_PTR(-EINVAL); + } + + instance->type = args->args[0]; + + if (!(instance->type == PHY_TYPE_USB2 || + instance->type == PHY_TYPE_USB3)) { + dev_err(dev, "unsupported device type: %d\n", instance->type); + return ERR_PTR(-EINVAL); + } + + return instance->phy; +} + +static struct phy_ops mt65xx_u3phy_ops = { + .init = mt65xx_phy_init, + .exit = mt65xx_phy_exit, + .power_on = mt65xx_phy_power_on, + .power_off = mt65xx_phy_power_off, + .owner = THIS_MODULE, +}; + +static int mt65xx_u3phy_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct device_node *np = dev->of_node; + struct device_node *child_np; + struct phy_provider *provider; + struct resource *sif_res; + struct mt65xx_u3phy *u3phy; + struct resource res; + int port; + + u3phy = devm_kzalloc(dev, sizeof(*u3phy), GFP_KERNEL); + if (!u3phy) + return -ENOMEM; + + u3phy->nphys = of_get_child_count(np); + u3phy->phys = devm_kcalloc(dev, u3phy->nphys, + sizeof(*u3phy->phys), GFP_KERNEL); + if (!u3phy->phys) + return -ENOMEM; + + u3phy->dev = dev; + platform_set_drvdata(pdev, u3phy); + + sif_res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + u3phy->sif_base = devm_ioremap_resource(dev, sif_res); + if (IS_ERR(u3phy->sif_base)) { + dev_err(dev, "failed to remap sif regs\n"); + return PTR_ERR(u3phy->sif_base); + } + + u3phy->u3phya_ref = devm_clk_get(dev, "u3phya_ref"); + if (IS_ERR(u3phy->u3phya_ref)) { + dev_err(dev, "error to get u3phya_ref\n"); + return PTR_ERR(u3phy->u3phya_ref); + } + + port = 0; + for_each_child_of_node(np, child_np) { + struct mt65xx_phy_instance *instance; + struct phy *phy; + int retval; + + instance = devm_kzalloc(dev, sizeof(*instance), GFP_KERNEL); + if (!instance) + return -ENOMEM; + + u3phy->phys[port] = instance; + + phy = devm_phy_create(dev, child_np, &mt65xx_u3phy_ops); + if (IS_ERR(phy)) { + dev_err(dev, "failed to create phy\n"); + return PTR_ERR(phy); + } + + retval = of_address_to_resource(child_np, 0, &res); + if (retval) { + dev_err(dev, "failed to get address resource(id-%d)\n", + port); + return retval; + } + + instance->port_base = devm_ioremap_resource(&phy->dev, &res); + if (IS_ERR(instance->port_base)) { + dev_err(dev, "failed to remap phy regs\n"); + return PTR_ERR(instance->port_base); + } + + instance->phy = phy; + instance->index = port; + phy_set_drvdata(phy, instance); + port++; + } + + provider = devm_of_phy_provider_register(dev, mt65xx_phy_xlate); + + return PTR_ERR_OR_ZERO(provider); +} + +static const struct of_device_id mt65xx_u3phy_id_table[] = { + { .compatible = "mediatek,mt8173-u3phy", }, + { }, +}; +MODULE_DEVICE_TABLE(of, mt65xx_u3phy_id_table); + +static struct platform_driver mt65xx_u3phy_driver = { + .probe = mt65xx_u3phy_probe, + .driver = { + .name = "mt65xx-u3phy", + .of_match_table = mt65xx_u3phy_id_table, + }, +}; + +module_platform_driver(mt65xx_u3phy_driver); + +MODULE_AUTHOR("Chunfeng Yun "); +MODULE_DESCRIPTION("mt65xx USB PHY driver"); +MODULE_LICENSE("GPL v2"); -- cgit v0.10.2 From b2dfc34c975ad7b9c531f8b93f8bd7b8606286c1 Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Fri, 25 Sep 2015 08:47:29 +0800 Subject: phy: sun4i-usb: Use devm_gpiod_get_optional for optional GPIOs Both data->id_det_gpio and data->vbus_det_gpio are optional, so use devm_gpiod_get_optional for them. Signed-off-by: Axel Lin Reviewed-by: Hans de Goede Signed-off-by: Kishon Vijay Abraham I diff --git a/drivers/phy/phy-sun4i-usb.c b/drivers/phy/phy-sun4i-usb.c index 731b395..b12964b 100644 --- a/drivers/phy/phy-sun4i-usb.c +++ b/drivers/phy/phy-sun4i-usb.c @@ -551,19 +551,15 @@ static int sun4i_usb_phy_probe(struct platform_device *pdev) if (IS_ERR(data->base)) return PTR_ERR(data->base); - data->id_det_gpio = devm_gpiod_get(dev, "usb0_id_det", GPIOD_IN); - if (IS_ERR(data->id_det_gpio)) { - if (PTR_ERR(data->id_det_gpio) == -EPROBE_DEFER) - return -EPROBE_DEFER; - data->id_det_gpio = NULL; - } - - data->vbus_det_gpio = devm_gpiod_get(dev, "usb0_vbus_det", GPIOD_IN); - if (IS_ERR(data->vbus_det_gpio)) { - if (PTR_ERR(data->vbus_det_gpio) == -EPROBE_DEFER) - return -EPROBE_DEFER; - data->vbus_det_gpio = NULL; - } + data->id_det_gpio = devm_gpiod_get_optional(dev, "usb0_id_det", + GPIOD_IN); + if (IS_ERR(data->id_det_gpio)) + return PTR_ERR(data->id_det_gpio); + + data->vbus_det_gpio = devm_gpiod_get_optional(dev, "usb0_vbus_det", + GPIOD_IN); + if (IS_ERR(data->vbus_det_gpio)) + return PTR_ERR(data->vbus_det_gpio); if (of_find_property(np, "usb0_vbus_power-supply", NULL)) { data->vbus_power_supply = devm_power_supply_get_by_phandle(dev, -- cgit v0.10.2 From 9d030e170608aeb287ef56ecb40d9aa4cfa7d086 Mon Sep 17 00:00:00 2001 From: Ray Jui Date: Mon, 21 Sep 2015 10:17:17 -0700 Subject: dt-bindings: Add Cygnus PCIe PHY binding doc Add DT binding document for Broadcom Cygnus PCIe PHYs Signed-off-by: Ray Jui Reviewed-by: Arun Parameswaran Reviewed-by: JD (Jiandong) Zheng Reviewed-by: Scott Branden Signed-off-by: Kishon Vijay Abraham I diff --git a/Documentation/devicetree/bindings/phy/brcm,cygnus-pcie-phy.txt b/Documentation/devicetree/bindings/phy/brcm,cygnus-pcie-phy.txt new file mode 100644 index 0000000..761c4bc --- /dev/null +++ b/Documentation/devicetree/bindings/phy/brcm,cygnus-pcie-phy.txt @@ -0,0 +1,47 @@ +Broadcom Cygnus PCIe PHY + +Required properties: +- compatible: must be "brcm,cygnus-pcie-phy" +- reg: base address and length of the PCIe PHY block +- #address-cells: must be 1 +- #size-cells: must be 0 + +Each PCIe PHY should be represented by a child node + +Required properties For the child node: +- reg: the PHY ID +0 - PCIe RC 0 +1 - PCIe RC 1 +- #phy-cells: must be 0 + +Example: + pcie_phy: phy@0301d0a0 { + compatible = "brcm,cygnus-pcie-phy"; + reg = <0x0301d0a0 0x14>; + + pcie0_phy: phy@0 { + reg = <0>; + #phy-cells = <0>; + }; + + pcie1_phy: phy@1 { + reg = <1>; + #phy-cells = <0>; + }; + }; + + /* users of the PCIe phy */ + + pcie0: pcie@18012000 { + ... + ... + phys = <&pcie0_phy>; + phy-names = "pcie-phy"; + }; + + pcie1: pcie@18013000 { + ... + ... + phys = ; + phy-names = "pcie-phy"; + }; -- cgit v0.10.2 From 882fed73420e85c0b06447c036e3096862fc73ba Mon Sep 17 00:00:00 2001 From: Ray Jui Date: Mon, 21 Sep 2015 10:17:18 -0700 Subject: phy: cygnus: pcie: Add Cygnus PCIe PHY support This patch adds the PCIe PHY support for the Broadcom PCIe RC interface on Cygnus Signed-off-by: Ray Jui Reviewed-by: Arun Parameswaran Reviewed-by: JD (Jiandong) Zheng Reviewed-by: Scott Branden Signed-off-by: Kishon Vijay Abraham I diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig index ec436c1..7eb5859d 100644 --- a/drivers/phy/Kconfig +++ b/drivers/phy/Kconfig @@ -380,4 +380,13 @@ config PHY_BRCMSTB_SATA Enable this to support the SATA3 PHY on 28nm Broadcom STB SoCs. Likely useful only with CONFIG_SATA_BRCMSTB enabled. +config PHY_CYGNUS_PCIE + tristate "Broadcom Cygnus PCIe PHY driver" + depends on OF && (ARCH_BCM_CYGNUS || COMPILE_TEST) + select GENERIC_PHY + default ARCH_BCM_CYGNUS + help + Enable this to support the Broadcom Cygnus PCIe PHY. + If unsure, say N. + endmenu diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile index a7cc629..075db1a 100644 --- a/drivers/phy/Makefile +++ b/drivers/phy/Makefile @@ -47,3 +47,4 @@ obj-$(CONFIG_PHY_QCOM_UFS) += phy-qcom-ufs-qmp-14nm.o obj-$(CONFIG_PHY_TUSB1210) += phy-tusb1210.o obj-$(CONFIG_PHY_BRCMSTB_SATA) += phy-brcmstb-sata.o obj-$(CONFIG_PHY_PISTACHIO_USB) += phy-pistachio-usb.o +obj-$(CONFIG_PHY_CYGNUS_PCIE) += phy-bcm-cygnus-pcie.o diff --git a/drivers/phy/phy-bcm-cygnus-pcie.c b/drivers/phy/phy-bcm-cygnus-pcie.c new file mode 100644 index 0000000..7ad72b7 --- /dev/null +++ b/drivers/phy/phy-bcm-cygnus-pcie.c @@ -0,0 +1,213 @@ +/* + * Copyright (C) 2015 Broadcom Corporation + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include +#include +#include +#include +#include +#include + +#define PCIE_CFG_OFFSET 0x00 +#define PCIE1_PHY_IDDQ_SHIFT 10 +#define PCIE0_PHY_IDDQ_SHIFT 2 + +enum cygnus_pcie_phy_id { + CYGNUS_PHY_PCIE0 = 0, + CYGNUS_PHY_PCIE1, + MAX_NUM_PHYS, +}; + +struct cygnus_pcie_phy_core; + +/** + * struct cygnus_pcie_phy - Cygnus PCIe PHY device + * @core: pointer to the Cygnus PCIe PHY core control + * @id: internal ID to identify the Cygnus PCIe PHY + * @phy: pointer to the kernel PHY device + */ +struct cygnus_pcie_phy { + struct cygnus_pcie_phy_core *core; + enum cygnus_pcie_phy_id id; + struct phy *phy; +}; + +/** + * struct cygnus_pcie_phy_core - Cygnus PCIe PHY core control + * @dev: pointer to device + * @base: base register + * @lock: mutex to protect access to individual PHYs + * @phys: pointer to Cygnus PHY device + */ +struct cygnus_pcie_phy_core { + struct device *dev; + void __iomem *base; + struct mutex lock; + struct cygnus_pcie_phy phys[MAX_NUM_PHYS]; +}; + +static int cygnus_pcie_power_config(struct cygnus_pcie_phy *phy, bool enable) +{ + struct cygnus_pcie_phy_core *core = phy->core; + unsigned shift; + u32 val; + + mutex_lock(&core->lock); + + switch (phy->id) { + case CYGNUS_PHY_PCIE0: + shift = PCIE0_PHY_IDDQ_SHIFT; + break; + + case CYGNUS_PHY_PCIE1: + shift = PCIE1_PHY_IDDQ_SHIFT; + break; + + default: + mutex_unlock(&core->lock); + dev_err(core->dev, "PCIe PHY %d invalid\n", phy->id); + return -EINVAL; + } + + if (enable) { + val = readl(core->base + PCIE_CFG_OFFSET); + val &= ~BIT(shift); + writel(val, core->base + PCIE_CFG_OFFSET); + /* + * Wait 50 ms for the PCIe Serdes to stabilize after the analog + * front end is brought up + */ + msleep(50); + } else { + val = readl(core->base + PCIE_CFG_OFFSET); + val |= BIT(shift); + writel(val, core->base + PCIE_CFG_OFFSET); + } + + mutex_unlock(&core->lock); + dev_dbg(core->dev, "PCIe PHY %d %s\n", phy->id, + enable ? "enabled" : "disabled"); + return 0; +} + +static int cygnus_pcie_phy_power_on(struct phy *p) +{ + struct cygnus_pcie_phy *phy = phy_get_drvdata(p); + + return cygnus_pcie_power_config(phy, true); +} + +static int cygnus_pcie_phy_power_off(struct phy *p) +{ + struct cygnus_pcie_phy *phy = phy_get_drvdata(p); + + return cygnus_pcie_power_config(phy, false); +} + +static struct phy_ops cygnus_pcie_phy_ops = { + .power_on = cygnus_pcie_phy_power_on, + .power_off = cygnus_pcie_phy_power_off, + .owner = THIS_MODULE, +}; + +static int cygnus_pcie_phy_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct device_node *node = dev->of_node, *child; + struct cygnus_pcie_phy_core *core; + struct phy_provider *provider; + struct resource *res; + unsigned cnt = 0; + + if (of_get_child_count(node) == 0) { + dev_err(dev, "PHY no child node\n"); + return -ENODEV; + } + + core = devm_kzalloc(dev, sizeof(*core), GFP_KERNEL); + if (!core) + return -ENOMEM; + + core->dev = dev; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + core->base = devm_ioremap_resource(dev, res); + if (IS_ERR(core->base)) + return PTR_ERR(core->base); + + mutex_init(&core->lock); + + for_each_available_child_of_node(node, child) { + unsigned int id; + struct cygnus_pcie_phy *p; + + if (of_property_read_u32(child, "reg", &id)) { + dev_err(dev, "missing reg property for %s\n", + child->name); + return -EINVAL; + } + + if (id >= MAX_NUM_PHYS) { + dev_err(dev, "invalid PHY id: %u\n", id); + return -EINVAL; + } + + if (core->phys[id].phy) { + dev_err(dev, "duplicated PHY id: %u\n", id); + return -EINVAL; + } + + p = &core->phys[id]; + p->phy = devm_phy_create(dev, child, &cygnus_pcie_phy_ops); + if (IS_ERR(p->phy)) { + dev_err(dev, "failed to create PHY\n"); + return PTR_ERR(p->phy); + } + + p->core = core; + p->id = id; + phy_set_drvdata(p->phy, p); + cnt++; + } + + dev_set_drvdata(dev, core); + + provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate); + if (IS_ERR(provider)) { + dev_err(dev, "failed to register PHY provider\n"); + return PTR_ERR(provider); + } + + dev_dbg(dev, "registered %u PCIe PHY(s)\n", cnt); + + return 0; +} + +static const struct of_device_id cygnus_pcie_phy_match_table[] = { + { .compatible = "brcm,cygnus-pcie-phy" }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, cygnus_pcie_phy_match_table); + +static struct platform_driver cygnus_pcie_phy_driver = { + .driver = { + .name = "cygnus-pcie-phy", + .of_match_table = cygnus_pcie_phy_match_table, + }, + .probe = cygnus_pcie_phy_probe, +}; +module_platform_driver(cygnus_pcie_phy_driver); + +MODULE_AUTHOR("Ray Jui "); +MODULE_DESCRIPTION("Broadcom Cygnus PCIe PHY driver"); +MODULE_LICENSE("GPL v2"); -- cgit v0.10.2 From 0f8669e343982ac66f4420335777cb5456b8abb0 Mon Sep 17 00:00:00 2001 From: Chunfeng Yun Date: Mon, 12 Oct 2015 10:41:57 +0800 Subject: MAINTAINERS: add Mediatek usb3 phy driver Add Mediatek usb3 phy driver to maintainer entry. Signed-off-by: Chunfeng Yun Signed-off-by: Kishon Vijay Abraham I diff --git a/MAINTAINERS b/MAINTAINERS index 7ba7ab7..be0055c 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -1291,6 +1291,13 @@ F: arch/arm/mach-mediatek/ N: mtk K: mediatek +ARM/Mediatek USB3 PHY DRIVER +M: Chunfeng Yun +L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) +L: linux-mediatek@lists.infradead.org (moderated for non-subscribers) +S: Maintained +F: drivers/phy/phy-mt65xx-usb3.c + ARM/MICREL KS8695 ARCHITECTURE M: Greg Ungerer L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) -- cgit v0.10.2