From 8b189fdbc5f68f3f43e67004de25f75c1a5b4e51 Mon Sep 17 00:00:00 2001 From: Alexandre Bounine Date: Tue, 22 Mar 2016 14:26:00 -0700 Subject: rapidio: add query_mport operation Add mport query operation to report master port RapidIO capabilities and run time configuration to upper level drivers. Signed-off-by: Alexandre Bounine Cc: Matt Porter Cc: Aurelien Jacquiot Cc: Andre van Herk Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/drivers/rapidio/rio.c b/drivers/rapidio/rio.c index e220edc..c72f4da 100644 --- a/drivers/rapidio/rio.c +++ b/drivers/rapidio/rio.c @@ -68,6 +68,23 @@ u16 rio_local_get_device_id(struct rio_mport *port) } /** + * rio_query_mport - Query mport device attributes + * @port: mport device to query + * @mport_attr: mport attributes data structure + * + * Returns attributes of specified mport through the + * pointer to attributes data structure. + */ +int rio_query_mport(struct rio_mport *port, + struct rio_mport_attr *mport_attr) +{ + if (!port->ops->query_mport) + return -ENODATA; + return port->ops->query_mport(port, mport_attr); +} +EXPORT_SYMBOL(rio_query_mport); + +/** * rio_add_device- Adds a RIO device to the device model * @rdev: RIO device * diff --git a/include/linux/rio.h b/include/linux/rio.h index cde976e..8996a62 100644 --- a/include/linux/rio.h +++ b/include/linux/rio.h @@ -314,6 +314,50 @@ struct rio_net { struct rio_id_table destid_table; /* destID allocation table */ }; +enum rio_link_speed { + RIO_LINK_DOWN = 0, /* SRIO Link not initialized */ + RIO_LINK_125 = 1, /* 1.25 GBaud */ + RIO_LINK_250 = 2, /* 2.5 GBaud */ + RIO_LINK_312 = 3, /* 3.125 GBaud */ + RIO_LINK_500 = 4, /* 5.0 GBaud */ + RIO_LINK_625 = 5 /* 6.25 GBaud */ +}; + +enum rio_link_width { + RIO_LINK_1X = 0, + RIO_LINK_1XR = 1, + RIO_LINK_2X = 3, + RIO_LINK_4X = 2, + RIO_LINK_8X = 4, + RIO_LINK_16X = 5 +}; + +enum rio_mport_flags { + RIO_MPORT_DMA = (1 << 0), /* supports DMA data transfers */ + RIO_MPORT_DMA_SG = (1 << 1), /* DMA supports HW SG mode */ + RIO_MPORT_IBSG = (1 << 2), /* inbound mapping supports SG */ +}; + +/** + * struct rio_mport_attr - RIO mport device attributes + * @flags: mport device capability flags + * @link_speed: SRIO link speed value (as defined by RapidIO specification) + * @link_width: SRIO link width value (as defined by RapidIO specification) + * @dma_max_sge: number of SG list entries that can be handled by DMA channel(s) + * @dma_max_size: max number of bytes in single DMA transfer (SG entry) + * @dma_align: alignment shift for DMA operations (as for other DMA operations) + */ +struct rio_mport_attr { + int flags; + int link_speed; + int link_width; + + /* DMA capability info: valid only if RIO_MPORT_DMA flag is set */ + int dma_max_sge; + int dma_max_size; + int dma_align; +}; + /* Low-level architecture-dependent routines */ /** @@ -333,6 +377,7 @@ struct rio_net { * @get_inb_message: Callback to get a message from an inbound mailbox queue. * @map_inb: Callback to map RapidIO address region into local memory space. * @unmap_inb: Callback to unmap RapidIO address region mapped with map_inb(). + * @query_mport: Callback to query mport device attributes. */ struct rio_ops { int (*lcread) (struct rio_mport *mport, int index, u32 offset, int len, @@ -358,6 +403,8 @@ struct rio_ops { int (*map_inb)(struct rio_mport *mport, dma_addr_t lstart, u64 rstart, u32 size, u32 flags); void (*unmap_inb)(struct rio_mport *mport, dma_addr_t lstart); + int (*query_mport)(struct rio_mport *mport, + struct rio_mport_attr *attr); }; #define RIO_RESOURCE_MEM 0x00000100 @@ -481,5 +528,7 @@ extern int rio_open_inb_mbox(struct rio_mport *, void *, int, int); extern void rio_close_inb_mbox(struct rio_mport *, int); extern int rio_open_outb_mbox(struct rio_mport *, void *, int, int); extern void rio_close_outb_mbox(struct rio_mport *, int); +extern int rio_query_mport(struct rio_mport *port, + struct rio_mport_attr *mport_attr); #endif /* LINUX_RIO_H */ diff --git a/include/linux/rio_regs.h b/include/linux/rio_regs.h index 218168a..1063ae3 100644 --- a/include/linux/rio_regs.h +++ b/include/linux/rio_regs.h @@ -238,6 +238,8 @@ #define RIO_PORT_N_ACK_INBOUND 0x3f000000 #define RIO_PORT_N_ACK_OUTSTAND 0x00003f00 #define RIO_PORT_N_ACK_OUTBOUND 0x0000003f +#define RIO_PORT_N_CTL2_CSR(x) (0x0054 + x*0x20) +#define RIO_PORT_N_CTL2_SEL_BAUD 0xf0000000 #define RIO_PORT_N_ERR_STS_CSR(x) (0x0058 + x*0x20) #define RIO_PORT_N_ERR_STS_PW_OUT_ES 0x00010000 /* Output Error-stopped */ #define RIO_PORT_N_ERR_STS_PW_INP_ES 0x00000100 /* Input Error-stopped */ @@ -249,6 +251,7 @@ #define RIO_PORT_N_CTL_PWIDTH 0xc0000000 #define RIO_PORT_N_CTL_PWIDTH_1 0x00000000 #define RIO_PORT_N_CTL_PWIDTH_4 0x40000000 +#define RIO_PORT_N_CTL_IPW 0x38000000 /* Initialized Port Width */ #define RIO_PORT_N_CTL_P_TYP_SER 0x00000001 #define RIO_PORT_N_CTL_LOCKOUT 0x00000002 #define RIO_PORT_N_CTL_EN_RX_SER 0x00200000 -- cgit v0.10.2