From e998200c1912f22cf257ae88771e56de588ee8fb Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Mon, 22 Jun 2015 09:22:34 -0700 Subject: Input: imx_keypad - check for clk_prepare_enable() error clk_prepare_enable() may fail, so we should better check its return value and propagate it in the case of error. Signed-off-by: Fabio Estevam Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/keyboard/imx_keypad.c b/drivers/input/keyboard/imx_keypad.c index 2e855e6..d2ea863 100644 --- a/drivers/input/keyboard/imx_keypad.c +++ b/drivers/input/keyboard/imx_keypad.c @@ -506,7 +506,9 @@ static int imx_keypad_probe(struct platform_device *pdev) input_set_drvdata(input_dev, keypad); /* Ensure that the keypad will stay dormant until opened */ - clk_prepare_enable(keypad->clk); + error = clk_prepare_enable(keypad->clk); + if (error) + return error; imx_keypad_inhibit(keypad); clk_disable_unprepare(keypad->clk); -- cgit v0.10.2 From 75b7f05d2798ee3a1cc5bbdd54acd0e318a80396 Mon Sep 17 00:00:00 2001 From: "Pierre-Loup A. Griffais" Date: Mon, 22 Jun 2015 14:10:36 -0700 Subject: Input: xpad - set the LEDs properly on XBox Wireless controllers Based on Patch by Pierre-Loup A. Griffais : Add the logic to set the LEDs on XBox Wireless controllers. Command sequence found by sniffing the Windows data stream when plugging the device in. Updated based on comments on linux-input: unify codepaths in xpad_send_led_command for wired/ wireless controller. Also document command values for clarification. All values tested on Xbox 360 Wireless Controller. Signed-off-by: Pavel Rojtberg Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/joystick/xpad.c b/drivers/input/joystick/xpad.c index 61c7611..6f8755e 100644 --- a/drivers/input/joystick/xpad.c +++ b/drivers/input/joystick/xpad.c @@ -881,17 +881,57 @@ struct xpad_led { struct usb_xpad *xpad; }; +/** + * @param command + * 0: off + * 1: all blink, then previous setting + * 2: 1/top-left blink, then on + * 3: 2/top-right blink, then on + * 4: 3/bottom-left blink, then on + * 5: 4/bottom-right blink, then on + * 6: 1/top-left on + * 7: 2/top-right on + * 8: 3/bottom-left on + * 9: 4/bottom-right on + * 10: rotate + * 11: blink, based on previous setting + * 12: slow blink, based on previous setting + * 13: rotate with two lights + * 14: persistent slow all blink + * 15: blink once, then previous setting + */ static void xpad_send_led_command(struct usb_xpad *xpad, int command) { - if (command >= 0 && command < 14) { - mutex_lock(&xpad->odata_mutex); + command %= 16; + + mutex_lock(&xpad->odata_mutex); + + switch (xpad->xtype) { + case XTYPE_XBOX360: xpad->odata[0] = 0x01; xpad->odata[1] = 0x03; xpad->odata[2] = command; xpad->irq_out->transfer_buffer_length = 3; - usb_submit_urb(xpad->irq_out, GFP_KERNEL); - mutex_unlock(&xpad->odata_mutex); + break; + case XTYPE_XBOX360W: + xpad->odata[0] = 0x00; + xpad->odata[1] = 0x00; + xpad->odata[2] = 0x08; + xpad->odata[3] = 0x40 + command; + xpad->odata[4] = 0x00; + xpad->odata[5] = 0x00; + xpad->odata[6] = 0x00; + xpad->odata[7] = 0x00; + xpad->odata[8] = 0x00; + xpad->odata[9] = 0x00; + xpad->odata[10] = 0x00; + xpad->odata[11] = 0x00; + xpad->irq_out->transfer_buffer_length = 12; + break; } + + usb_submit_urb(xpad->irq_out, GFP_KERNEL); + mutex_unlock(&xpad->odata_mutex); } static void xpad_led_set(struct led_classdev *led_cdev, @@ -911,7 +951,7 @@ static int xpad_led_probe(struct usb_xpad *xpad) struct led_classdev *led_cdev; int error; - if (xpad->xtype != XTYPE_XBOX360) + if (xpad->xtype != XTYPE_XBOX360 && xpad->xtype != XTYPE_XBOX360W) return 0; xpad->led = led = kzalloc(sizeof(struct xpad_led), GFP_KERNEL); -- cgit v0.10.2 From cae705baa40b2c20de8f9bb79ef4bcc6b2418c7c Mon Sep 17 00:00:00 2001 From: Pavel Rojtberg Date: Mon, 22 Jun 2015 14:11:30 -0700 Subject: Input: xpad - re-send LED command on present event The controller only receives commands when its present. So for the correct LED to be lit the LED command has to be sent on the present event. Signed-off-by: Pavel Rojtberg Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/joystick/xpad.c b/drivers/input/joystick/xpad.c index 6f8755e..f8850f9 100644 --- a/drivers/input/joystick/xpad.c +++ b/drivers/input/joystick/xpad.c @@ -344,6 +344,7 @@ struct usb_xpad { int mapping; /* map d-pad to buttons or to axes */ int xtype; /* type of xbox device */ + unsigned long led_no; /* led to lit on xbox360 controllers */ }; /* @@ -488,6 +489,8 @@ static void xpad360_process_packet(struct usb_xpad *xpad, input_sync(dev); } +static void xpad_identify_controller(struct usb_xpad *xpad); + /* * xpad360w_process_packet * @@ -510,6 +513,11 @@ static void xpad360w_process_packet(struct usb_xpad *xpad, u16 cmd, unsigned cha if (data[1] & 0x80) { xpad->pad_present = 1; usb_submit_urb(xpad->bulk_out, GFP_ATOMIC); + /* + * Light up the segment corresponding to + * controller number. + */ + xpad_identify_controller(xpad); } else xpad->pad_present = 0; } @@ -934,6 +942,12 @@ static void xpad_send_led_command(struct usb_xpad *xpad, int command) mutex_unlock(&xpad->odata_mutex); } +static void xpad_identify_controller(struct usb_xpad *xpad) +{ + /* Light up the segment corresponding to controller number */ + xpad_send_led_command(xpad, (xpad->led_no % 4) + 2); +} + static void xpad_led_set(struct led_classdev *led_cdev, enum led_brightness value) { @@ -945,8 +959,7 @@ static void xpad_led_set(struct led_classdev *led_cdev, static int xpad_led_probe(struct usb_xpad *xpad) { - static atomic_t led_seq = ATOMIC_INIT(-1); - unsigned long led_no; + static atomic_t led_seq = ATOMIC_INIT(-1); struct xpad_led *led; struct led_classdev *led_cdev; int error; @@ -958,9 +971,9 @@ static int xpad_led_probe(struct usb_xpad *xpad) if (!led) return -ENOMEM; - led_no = atomic_inc_return(&led_seq); + xpad->led_no = atomic_inc_return(&led_seq); - snprintf(led->name, sizeof(led->name), "xpad%lu", led_no); + snprintf(led->name, sizeof(led->name), "xpad%lu", xpad->led_no); led->xpad = xpad; led_cdev = &led->led_cdev; @@ -974,10 +987,8 @@ static int xpad_led_probe(struct usb_xpad *xpad) return error; } - /* - * Light up the segment corresponding to controller number - */ - xpad_send_led_command(xpad, (led_no % 4) + 2); + /* Light up the segment corresponding to controller number */ + xpad_identify_controller(xpad); return 0; } @@ -994,6 +1005,7 @@ static void xpad_led_disconnect(struct usb_xpad *xpad) #else static int xpad_led_probe(struct usb_xpad *xpad) { return 0; } static void xpad_led_disconnect(struct usb_xpad *xpad) { } +static void xpad_identify_controller(struct usb_xpad *xpad) { } #endif -- cgit v0.10.2 From eeeee40fcc3f92745639cfb166854656dddeb040 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Wed, 24 Jun 2015 14:25:54 -0700 Subject: Input: axp20x-pek - fix reporting button state as inverted Currently we are reporting the button state as inverted on all boards with an axp209 pmic, tested on a ba10-tvbox, bananapi, bananapro, cubietruck and utoo-p66 tablet. The axp209 datasheet clearly states that the power button must be connected between the PWRON key and ground. Which means that on a press we will get a falling edge (dbf) irq not a rising one, and likewise on release we will get a rising edge (dbr) irq, not a falling one. This commit swaps the check for the 2 irqs fixing the inverted reporting of the power button state. Signed-off-by: Hans de Goede Acked-by: Chen-Yu Tsai Acked-by: Carlo Caione Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/misc/axp20x-pek.c b/drivers/input/misc/axp20x-pek.c index f1c8447..10e140a 100644 --- a/drivers/input/misc/axp20x-pek.c +++ b/drivers/input/misc/axp20x-pek.c @@ -167,9 +167,13 @@ static irqreturn_t axp20x_pek_irq(int irq, void *pwr) struct input_dev *idev = pwr; struct axp20x_pek *axp20x_pek = input_get_drvdata(idev); - if (irq == axp20x_pek->irq_dbr) + /* + * The power-button is connected to ground so a falling edge (dbf) + * means it is pressed. + */ + if (irq == axp20x_pek->irq_dbf) input_report_key(idev, KEY_POWER, true); - else if (irq == axp20x_pek->irq_dbf) + else if (irq == axp20x_pek->irq_dbr) input_report_key(idev, KEY_POWER, false); input_sync(idev); -- cgit v0.10.2 From 3e30c11c8a902de350281a0d821e17cdb45ef156 Mon Sep 17 00:00:00 2001 From: HungNien Chen Date: Mon, 15 Jun 2015 18:57:08 +0300 Subject: Input: add a driver for wdt87xx touchscreen controller This is a driver for Weida HiTech WDT87xx series touchscreen controller. Signed-off-by: HungNien Chen Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig index a398d63..aa2b5f2 100644 --- a/drivers/input/touchscreen/Kconfig +++ b/drivers/input/touchscreen/Kconfig @@ -658,6 +658,18 @@ config TOUCHSCREEN_PIXCIR To compile this driver as a module, choose M here: the module will be called pixcir_i2c_ts. +config TOUCHSCREEN_WDT87XX_I2C + tristate "Weida HiTech I2C touchscreen" + depends on I2C + help + Say Y here if you have a Weida WDT87XX I2C touchscreen + connected to your system. + + If unsure, say N. + + To compile this driver as a module, choose M here: the + module will be called wdt87xx_i2c. + config TOUCHSCREEN_WM831X tristate "Support for WM831x touchscreen controllers" depends on MFD_WM831X diff --git a/drivers/input/touchscreen/Makefile b/drivers/input/touchscreen/Makefile index 44deea7..fa3d33b 100644 --- a/drivers/input/touchscreen/Makefile +++ b/drivers/input/touchscreen/Makefile @@ -72,6 +72,7 @@ obj-$(CONFIG_TOUCHSCREEN_TSC2007) += tsc2007.o obj-$(CONFIG_TOUCHSCREEN_UCB1400) += ucb1400_ts.o obj-$(CONFIG_TOUCHSCREEN_WACOM_W8001) += wacom_w8001.o obj-$(CONFIG_TOUCHSCREEN_WACOM_I2C) += wacom_i2c.o +obj-$(CONFIG_TOUCHSCREEN_WDT87XX_I2C) += wdt87xx_i2c.o obj-$(CONFIG_TOUCHSCREEN_WM831X) += wm831x-ts.o obj-$(CONFIG_TOUCHSCREEN_WM97XX) += wm97xx-ts.o wm97xx-ts-$(CONFIG_TOUCHSCREEN_WM9705) += wm9705.o diff --git a/drivers/input/touchscreen/wdt87xx_i2c.c b/drivers/input/touchscreen/wdt87xx_i2c.c new file mode 100644 index 0000000..c073ea9 --- /dev/null +++ b/drivers/input/touchscreen/wdt87xx_i2c.c @@ -0,0 +1,1140 @@ +/* + * Weida HiTech WDT87xx TouchScreen I2C driver + * + * Copyright (c) 2015 Weida Hi-Tech Co., Ltd. + * HN Chen + * + * This software is licensed under the terms of the GNU General Public + * License, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define WDT87XX_NAME "wdt87xx_i2c" +#define WDT87XX_DRV_VER "0.9.5" +#define WDT87XX_FW_NAME "wdt87xx_fw.bin" +#define WDT87XX_CFG_NAME "wdt87xx_cfg.bin" + +#define MODE_ACTIVE 0x01 +#define MODE_READY 0x02 +#define MODE_IDLE 0x03 +#define MODE_SLEEP 0x04 +#define MODE_STOP 0xFF + +#define WDT_MAX_FINGER 10 +#define WDT_RAW_BUF_COUNT 54 +#define WDT_V1_RAW_BUF_COUNT 74 +#define WDT_FIRMWARE_ID 0xa9e368f5 + +#define PG_SIZE 0x1000 +#define MAX_RETRIES 3 + +#define MAX_UNIT_AXIS 0x7FFF + +#define PKT_READ_SIZE 72 +#define PKT_WRITE_SIZE 80 + +/* the finger definition of the report event */ +#define FINGER_EV_OFFSET_ID 0 +#define FINGER_EV_OFFSET_X 1 +#define FINGER_EV_OFFSET_Y 3 +#define FINGER_EV_SIZE 5 + +#define FINGER_EV_V1_OFFSET_ID 0 +#define FINGER_EV_V1_OFFSET_W 1 +#define FINGER_EV_V1_OFFSET_P 2 +#define FINGER_EV_V1_OFFSET_X 3 +#define FINGER_EV_V1_OFFSET_Y 5 +#define FINGER_EV_V1_SIZE 7 + +/* The definition of a report packet */ +#define TOUCH_PK_OFFSET_REPORT_ID 0 +#define TOUCH_PK_OFFSET_EVENT 1 +#define TOUCH_PK_OFFSET_SCAN_TIME 51 +#define TOUCH_PK_OFFSET_FNGR_NUM 53 + +#define TOUCH_PK_V1_OFFSET_REPORT_ID 0 +#define TOUCH_PK_V1_OFFSET_EVENT 1 +#define TOUCH_PK_V1_OFFSET_SCAN_TIME 71 +#define TOUCH_PK_V1_OFFSET_FNGR_NUM 73 + +/* The definition of the controller parameters */ +#define CTL_PARAM_OFFSET_FW_ID 0 +#define CTL_PARAM_OFFSET_PLAT_ID 2 +#define CTL_PARAM_OFFSET_XMLS_ID1 4 +#define CTL_PARAM_OFFSET_XMLS_ID2 6 +#define CTL_PARAM_OFFSET_PHY_CH_X 8 +#define CTL_PARAM_OFFSET_PHY_CH_Y 10 +#define CTL_PARAM_OFFSET_PHY_X0 12 +#define CTL_PARAM_OFFSET_PHY_X1 14 +#define CTL_PARAM_OFFSET_PHY_Y0 16 +#define CTL_PARAM_OFFSET_PHY_Y1 18 +#define CTL_PARAM_OFFSET_PHY_W 22 +#define CTL_PARAM_OFFSET_PHY_H 24 + +/* Communication commands */ +#define PACKET_SIZE 56 +#define VND_REQ_READ 0x06 +#define VND_READ_DATA 0x07 +#define VND_REQ_WRITE 0x08 + +#define VND_CMD_START 0x00 +#define VND_CMD_STOP 0x01 +#define VND_CMD_RESET 0x09 + +#define VND_CMD_ERASE 0x1A + +#define VND_GET_CHECKSUM 0x66 + +#define VND_SET_DATA 0x83 +#define VND_SET_COMMAND_DATA 0x84 +#define VND_SET_CHECKSUM_CALC 0x86 +#define VND_SET_CHECKSUM_LENGTH 0x87 + +#define VND_CMD_SFLCK 0xFC +#define VND_CMD_SFUNL 0xFD + +#define CMD_SFLCK_KEY 0xC39B +#define CMD_SFUNL_KEY 0x95DA + +#define STRIDX_PLATFORM_ID 0x80 +#define STRIDX_PARAMETERS 0x81 + +#define CMD_BUF_SIZE 8 +#define PKT_BUF_SIZE 64 + +/* The definition of the command packet */ +#define CMD_REPORT_ID_OFFSET 0x0 +#define CMD_TYPE_OFFSET 0x1 +#define CMD_INDEX_OFFSET 0x2 +#define CMD_KEY_OFFSET 0x3 +#define CMD_LENGTH_OFFSET 0x4 +#define CMD_DATA_OFFSET 0x8 + +/* The definition of firmware chunk tags */ +#define FOURCC_ID_RIFF 0x46464952 +#define FOURCC_ID_WHIF 0x46494857 +#define FOURCC_ID_FRMT 0x544D5246 +#define FOURCC_ID_FRWR 0x52575246 +#define FOURCC_ID_CNFG 0x47464E43 + +#define CHUNK_ID_FRMT FOURCC_ID_FRMT +#define CHUNK_ID_FRWR FOURCC_ID_FRWR +#define CHUNK_ID_CNFG FOURCC_ID_CNFG + +#define FW_FOURCC1_OFFSET 0 +#define FW_SIZE_OFFSET 4 +#define FW_FOURCC2_OFFSET 8 +#define FW_PAYLOAD_OFFSET 40 + +#define FW_CHUNK_ID_OFFSET 0 +#define FW_CHUNK_SIZE_OFFSET 4 +#define FW_CHUNK_TGT_START_OFFSET 8 +#define FW_CHUNK_PAYLOAD_LEN_OFFSET 12 +#define FW_CHUNK_SRC_START_OFFSET 16 +#define FW_CHUNK_VERSION_OFFSET 20 +#define FW_CHUNK_ATTR_OFFSET 24 +#define FW_CHUNK_PAYLOAD_OFFSET 32 + +/* Controller requires minimum 300us between commands */ +#define WDT_COMMAND_DELAY_MS 2 +#define WDT_FLASH_WRITE_DELAY_MS 4 + +struct wdt87xx_sys_param { + u16 fw_id; + u16 plat_id; + u16 xmls_id1; + u16 xmls_id2; + u16 phy_ch_x; + u16 phy_ch_y; + u16 phy_w; + u16 phy_h; + u32 max_x; + u32 max_y; +}; + +struct wdt87xx_data { + struct i2c_client *client; + struct input_dev *input; + /* Mutex for fw update to prevent concurrent access */ + struct mutex fw_mutex; + struct wdt87xx_sys_param param; + u8 phys[32]; +}; + +static int wdt87xx_i2c_xfer(struct i2c_client *client, + void *txdata, size_t txlen, + void *rxdata, size_t rxlen) +{ + struct i2c_msg msgs[] = { + { + .addr = client->addr, + .flags = 0, + .len = txlen, + .buf = txdata, + }, + { + .addr = client->addr, + .flags = I2C_M_RD, + .len = rxlen, + .buf = rxdata, + }, + }; + int error; + int ret; + + ret = i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs)); + if (ret != ARRAY_SIZE(msgs)) { + error = ret < 0 ? ret : -EIO; + dev_err(&client->dev, "%s: i2c transfer failed: %d\n", + __func__, error); + return error; + } + + return 0; +} + +static int wdt87xx_get_string(struct i2c_client *client, u8 str_idx, + u8 *buf, size_t len) +{ + u8 tx_buf[] = { 0x22, 0x00, 0x13, 0x0E, str_idx, 0x23, 0x00 }; + u8 rx_buf[PKT_WRITE_SIZE]; + size_t rx_len = len + 2; + int error; + + if (rx_len > sizeof(rx_buf)) + return -EINVAL; + + error = wdt87xx_i2c_xfer(client, tx_buf, sizeof(tx_buf), + rx_buf, rx_len); + if (error) { + dev_err(&client->dev, "get string failed: %d\n", error); + return error; + } + + if (rx_buf[1] != 0x03) { + dev_err(&client->dev, "unexpected response to get string: %d\n", + rx_buf[1]); + return -EINVAL; + } + + rx_len = min_t(size_t, len, rx_buf[0]); + memcpy(buf, &rx_buf[2], rx_len); + + mdelay(WDT_COMMAND_DELAY_MS); + + return 0; +} + +static int wdt87xx_get_feature(struct i2c_client *client, + u8 *buf, size_t buf_size) +{ + u8 tx_buf[8]; + u8 rx_buf[PKT_WRITE_SIZE]; + size_t tx_len = 0; + size_t rx_len = buf_size + 2; + int error; + + if (rx_len > sizeof(rx_buf)) + return -EINVAL; + + /* Get feature command packet */ + tx_buf[tx_len++] = 0x22; + tx_buf[tx_len++] = 0x00; + if (buf[CMD_REPORT_ID_OFFSET] > 0xF) { + tx_buf[tx_len++] = 0x30; + tx_buf[tx_len++] = 0x02; + tx_buf[tx_len++] = buf[CMD_REPORT_ID_OFFSET]; + } else { + tx_buf[tx_len++] = 0x30 | buf[CMD_REPORT_ID_OFFSET]; + tx_buf[tx_len++] = 0x02; + } + tx_buf[tx_len++] = 0x23; + tx_buf[tx_len++] = 0x00; + + error = wdt87xx_i2c_xfer(client, tx_buf, tx_len, rx_buf, rx_len); + if (error) { + dev_err(&client->dev, "get feature failed: %d\n", error); + return error; + } + + rx_len = min_t(size_t, buf_size, get_unaligned_le16(rx_buf)); + memcpy(buf, &rx_buf[2], rx_len); + + mdelay(WDT_COMMAND_DELAY_MS); + + return 0; +} + +static int wdt87xx_set_feature(struct i2c_client *client, + const u8 *buf, size_t buf_size) +{ + u8 tx_buf[PKT_WRITE_SIZE]; + int tx_len = 0; + int error; + + /* Set feature command packet */ + tx_buf[tx_len++] = 0x22; + tx_buf[tx_len++] = 0x00; + if (buf[CMD_REPORT_ID_OFFSET] > 0xF) { + tx_buf[tx_len++] = 0x30; + tx_buf[tx_len++] = 0x03; + tx_buf[tx_len++] = buf[CMD_REPORT_ID_OFFSET]; + } else { + tx_buf[tx_len++] = 0x30 | buf[CMD_REPORT_ID_OFFSET]; + tx_buf[tx_len++] = 0x03; + } + tx_buf[tx_len++] = 0x23; + tx_buf[tx_len++] = 0x00; + tx_buf[tx_len++] = (buf_size & 0xFF); + tx_buf[tx_len++] = ((buf_size & 0xFF00) >> 8); + + if (tx_len + buf_size > sizeof(tx_buf)) + return -EINVAL; + + memcpy(&tx_buf[tx_len], buf, buf_size); + tx_len += buf_size; + + error = i2c_master_send(client, tx_buf, tx_len); + if (error < 0) { + dev_err(&client->dev, "set feature failed: %d\n", error); + return error; + } + + mdelay(WDT_COMMAND_DELAY_MS); + + return 0; +} + +static int wdt87xx_send_command(struct i2c_client *client, int cmd, int value) +{ + u8 cmd_buf[CMD_BUF_SIZE]; + + /* Set the command packet */ + cmd_buf[CMD_REPORT_ID_OFFSET] = VND_REQ_WRITE; + cmd_buf[CMD_TYPE_OFFSET] = VND_SET_COMMAND_DATA; + put_unaligned_le16((u16)cmd, &cmd_buf[CMD_INDEX_OFFSET]); + + switch (cmd) { + case VND_CMD_START: + case VND_CMD_STOP: + case VND_CMD_RESET: + /* Mode selector */ + put_unaligned_le32((value & 0xFF), &cmd_buf[CMD_LENGTH_OFFSET]); + break; + + case VND_CMD_SFLCK: + put_unaligned_le16(CMD_SFLCK_KEY, &cmd_buf[CMD_KEY_OFFSET]); + break; + + case VND_CMD_SFUNL: + put_unaligned_le16(CMD_SFUNL_KEY, &cmd_buf[CMD_KEY_OFFSET]); + break; + + case VND_CMD_ERASE: + case VND_SET_CHECKSUM_CALC: + case VND_SET_CHECKSUM_LENGTH: + put_unaligned_le32(value, &cmd_buf[CMD_KEY_OFFSET]); + break; + + default: + cmd_buf[CMD_REPORT_ID_OFFSET] = 0; + dev_err(&client->dev, "Invalid command: %d\n", cmd); + return -EINVAL; + } + + return wdt87xx_set_feature(client, cmd_buf, sizeof(cmd_buf)); +} + +static int wdt87xx_sw_reset(struct i2c_client *client) +{ + int error; + + dev_dbg(&client->dev, "resetting device now\n"); + + error = wdt87xx_send_command(client, VND_CMD_RESET, 0); + if (error) { + dev_err(&client->dev, "reset failed\n"); + return error; + } + + /* Wait the device to be ready */ + msleep(200); + + return 0; +} + +static const void *wdt87xx_get_fw_chunk(const struct firmware *fw, u32 id) +{ + size_t pos = FW_PAYLOAD_OFFSET; + u32 chunk_id, chunk_size; + + while (pos < fw->size) { + chunk_id = get_unaligned_le32(fw->data + + pos + FW_CHUNK_ID_OFFSET); + if (chunk_id == id) + return fw->data + pos; + + chunk_size = get_unaligned_le32(fw->data + + pos + FW_CHUNK_SIZE_OFFSET); + pos += chunk_size + 2 * sizeof(u32); /* chunk ID + size */ + } + + return NULL; +} + +static int wdt87xx_get_sysparam(struct i2c_client *client, + struct wdt87xx_sys_param *param) +{ + u8 buf[PKT_READ_SIZE]; + int error; + + error = wdt87xx_get_string(client, STRIDX_PARAMETERS, buf, 32); + if (error) { + dev_err(&client->dev, "failed to get parameters\n"); + return error; + } + + param->xmls_id1 = get_unaligned_le16(buf + CTL_PARAM_OFFSET_XMLS_ID1); + param->xmls_id2 = get_unaligned_le16(buf + CTL_PARAM_OFFSET_XMLS_ID2); + param->phy_ch_x = get_unaligned_le16(buf + CTL_PARAM_OFFSET_PHY_CH_X); + param->phy_ch_y = get_unaligned_le16(buf + CTL_PARAM_OFFSET_PHY_CH_Y); + param->phy_w = get_unaligned_le16(buf + CTL_PARAM_OFFSET_PHY_W) / 10; + param->phy_h = get_unaligned_le16(buf + CTL_PARAM_OFFSET_PHY_H) / 10; + + param->max_x = MAX_UNIT_AXIS; + param->max_y = DIV_ROUND_CLOSEST(MAX_UNIT_AXIS * param->phy_h, + param->phy_w); + + error = wdt87xx_get_string(client, STRIDX_PLATFORM_ID, buf, 8); + if (error) { + dev_err(&client->dev, "failed to get platform id\n"); + return error; + } + + param->plat_id = buf[1]; + + buf[0] = 0xf2; + error = wdt87xx_get_feature(client, buf, 16); + if (error) { + dev_err(&client->dev, "failed to get firmware id\n"); + return error; + } + + if (buf[0] != 0xf2) { + dev_err(&client->dev, "wrong id of fw response: 0x%x\n", + buf[0]); + return -EINVAL; + } + + param->fw_id = get_unaligned_le16(&buf[1]); + + dev_info(&client->dev, + "fw_id: 0x%x, plat_id: 0x%x\nxml_id1: %04x, xml_id2: %04x\n", + param->fw_id, param->plat_id, + param->xmls_id1, param->xmls_id2); + + return 0; +} + +static int wdt87xx_validate_firmware(struct wdt87xx_data *wdt, + const struct firmware *fw) +{ + const void *fw_chunk; + u32 data1, data2; + u32 size; + u8 fw_chip_id; + u8 chip_id; + + data1 = get_unaligned_le32(fw->data + FW_FOURCC1_OFFSET); + data2 = get_unaligned_le32(fw->data + FW_FOURCC2_OFFSET); + if (data1 != FOURCC_ID_RIFF || data2 != FOURCC_ID_WHIF) { + dev_err(&wdt->client->dev, "check fw tag failed\n"); + return -EINVAL; + } + + size = get_unaligned_le32(fw->data + FW_SIZE_OFFSET); + if (size != fw->size) { + dev_err(&wdt->client->dev, + "fw size mismatch: expected %d, actual %zd\n", + size, fw->size); + return -EINVAL; + } + + /* + * Get the chip_id from the firmware. Make sure that it is the + * right controller to do the firmware and config update. + */ + fw_chunk = wdt87xx_get_fw_chunk(fw, CHUNK_ID_FRWR); + if (!fw_chunk) { + dev_err(&wdt->client->dev, + "unable to locate firmware chunk\n"); + return -EINVAL; + } + + fw_chip_id = (get_unaligned_le32(fw_chunk + + FW_CHUNK_VERSION_OFFSET) >> 12) & 0xF; + chip_id = (wdt->param.fw_id >> 12) & 0xF; + + if (fw_chip_id != chip_id) { + dev_err(&wdt->client->dev, + "fw version mismatch: fw %d vs. chip %d\n", + fw_chip_id, chip_id); + return -ENODEV; + } + + return 0; +} + +static int wdt87xx_validate_fw_chunk(const void *data, int id) +{ + if (id == CHUNK_ID_FRWR) { + u32 fw_id; + + fw_id = get_unaligned_le32(data + FW_CHUNK_PAYLOAD_OFFSET); + if (fw_id != WDT_FIRMWARE_ID) + return -EINVAL; + } + + return 0; +} + +static int wdt87xx_write_data(struct i2c_client *client, const char *data, + u32 address, int length) +{ + u16 packet_size; + int count = 0; + int error; + u8 pkt_buf[PKT_BUF_SIZE]; + + /* Address and length should be 4 bytes aligned */ + if ((address & 0x3) != 0 || (length & 0x3) != 0) { + dev_err(&client->dev, + "addr & len must be 4 bytes aligned %x, %x\n", + address, length); + return -EINVAL; + } + + while (length) { + packet_size = min(length, PACKET_SIZE); + + pkt_buf[CMD_REPORT_ID_OFFSET] = VND_REQ_WRITE; + pkt_buf[CMD_TYPE_OFFSET] = VND_SET_DATA; + put_unaligned_le16(packet_size, &pkt_buf[CMD_INDEX_OFFSET]); + put_unaligned_le32(address, &pkt_buf[CMD_LENGTH_OFFSET]); + memcpy(&pkt_buf[CMD_DATA_OFFSET], data, packet_size); + + error = wdt87xx_set_feature(client, pkt_buf, sizeof(pkt_buf)); + if (error) + return error; + + length -= packet_size; + data += packet_size; + address += packet_size; + + /* Wait for the controller to finish the write */ + mdelay(WDT_FLASH_WRITE_DELAY_MS); + + if ((++count % 32) == 0) { + /* Delay for fw to clear watch dog */ + msleep(20); + } + } + + return 0; +} + +static u16 misr(u16 cur_value, u8 new_value) +{ + u32 a, b; + u32 bit0; + u32 y; + + a = cur_value; + b = new_value; + bit0 = a ^ (b & 1); + bit0 ^= a >> 1; + bit0 ^= a >> 2; + bit0 ^= a >> 4; + bit0 ^= a >> 5; + bit0 ^= a >> 7; + bit0 ^= a >> 11; + bit0 ^= a >> 15; + y = (a << 1) ^ b; + y = (y & ~1) | (bit0 & 1); + + return (u16)y; +} + +static u16 wdt87xx_calculate_checksum(const u8 *data, size_t length) +{ + u16 checksum = 0; + size_t i; + + for (i = 0; i < length; i++) + checksum = misr(checksum, data[i]); + + return checksum; +} + +static int wdt87xx_get_checksum(struct i2c_client *client, u16 *checksum, + u32 address, int length) +{ + int error; + int time_delay; + u8 pkt_buf[PKT_BUF_SIZE]; + u8 cmd_buf[CMD_BUF_SIZE]; + + error = wdt87xx_send_command(client, VND_SET_CHECKSUM_LENGTH, length); + if (error) { + dev_err(&client->dev, "failed to set checksum length\n"); + return error; + } + + error = wdt87xx_send_command(client, VND_SET_CHECKSUM_CALC, address); + if (error) { + dev_err(&client->dev, "failed to set checksum address\n"); + return error; + } + + /* Wait the operation to complete */ + time_delay = DIV_ROUND_UP(length, 1024); + msleep(time_delay * 30); + + memset(cmd_buf, 0, sizeof(cmd_buf)); + cmd_buf[CMD_REPORT_ID_OFFSET] = VND_REQ_READ; + cmd_buf[CMD_TYPE_OFFSET] = VND_GET_CHECKSUM; + error = wdt87xx_set_feature(client, cmd_buf, sizeof(cmd_buf)); + if (error) { + dev_err(&client->dev, "failed to request checksum\n"); + return error; + } + + memset(pkt_buf, 0, sizeof(pkt_buf)); + pkt_buf[CMD_REPORT_ID_OFFSET] = VND_READ_DATA; + error = wdt87xx_get_feature(client, pkt_buf, sizeof(pkt_buf)); + if (error) { + dev_err(&client->dev, "failed to read checksum\n"); + return error; + } + + *checksum = get_unaligned_le16(&pkt_buf[CMD_DATA_OFFSET]); + return 0; +} + +static int wdt87xx_write_firmware(struct i2c_client *client, const void *chunk) +{ + u32 start_addr = get_unaligned_le32(chunk + FW_CHUNK_TGT_START_OFFSET); + u32 size = get_unaligned_le32(chunk + FW_CHUNK_PAYLOAD_LEN_OFFSET); + const void *data = chunk + FW_CHUNK_PAYLOAD_OFFSET; + int error; + int err1; + int page_size; + int retry = 0; + u16 device_checksum, firmware_checksum; + + dev_dbg(&client->dev, "start 4k page program\n"); + + error = wdt87xx_send_command(client, VND_CMD_STOP, MODE_STOP); + if (error) { + dev_err(&client->dev, "stop report mode failed\n"); + return error; + } + + error = wdt87xx_send_command(client, VND_CMD_SFUNL, 0); + if (error) { + dev_err(&client->dev, "unlock failed\n"); + goto out_enable_reporting; + } + + mdelay(10); + + while (size) { + dev_dbg(&client->dev, "%s: %x, %x\n", __func__, + start_addr, size); + + page_size = min_t(u32, size, PG_SIZE); + size -= page_size; + + for (retry = 0; retry < MAX_RETRIES; retry++) { + error = wdt87xx_send_command(client, VND_CMD_ERASE, + start_addr); + if (error) { + dev_err(&client->dev, + "erase failed at %#08x\n", start_addr); + break; + } + + msleep(50); + + error = wdt87xx_write_data(client, data, start_addr, + page_size); + if (error) { + dev_err(&client->dev, + "write failed at %#08x (%d bytes)\n", + start_addr, page_size); + break; + } + + error = wdt87xx_get_checksum(client, &device_checksum, + start_addr, page_size); + if (error) { + dev_err(&client->dev, + "failed to retrieve checksum for %#08x (len: %d)\n", + start_addr, page_size); + break; + } + + firmware_checksum = + wdt87xx_calculate_checksum(data, page_size); + + if (device_checksum == firmware_checksum) + break; + + dev_err(&client->dev, + "checksum fail: %d vs %d, retry %d\n", + device_checksum, firmware_checksum, retry); + } + + if (retry == MAX_RETRIES) { + dev_err(&client->dev, "page write failed\n"); + error = -EIO; + goto out_lock_device; + } + + start_addr = start_addr + page_size; + data = data + page_size; + } + +out_lock_device: + err1 = wdt87xx_send_command(client, VND_CMD_SFLCK, 0); + if (err1) + dev_err(&client->dev, "lock failed\n"); + + mdelay(10); + +out_enable_reporting: + err1 = wdt87xx_send_command(client, VND_CMD_START, 0); + if (err1) + dev_err(&client->dev, "start to report failed\n"); + + return error ? error : err1; +} + +static int wdt87xx_load_chunk(struct i2c_client *client, + const struct firmware *fw, u32 ck_id) +{ + const void *chunk; + int error; + + chunk = wdt87xx_get_fw_chunk(fw, ck_id); + if (!chunk) { + dev_err(&client->dev, "unable to locate chunk (type %d)\n", + ck_id); + return -EINVAL; + } + + error = wdt87xx_validate_fw_chunk(chunk, ck_id); + if (error) { + dev_err(&client->dev, "invalid chunk (type %d): %d\n", + ck_id, error); + return error; + } + + error = wdt87xx_write_firmware(client, chunk); + if (error) { + dev_err(&client->dev, + "failed to write fw chunk (type %d): %d\n", + ck_id, error); + return error; + } + + return 0; +} + +static int wdt87xx_do_update_firmware(struct i2c_client *client, + const struct firmware *fw, + unsigned int chunk_id) +{ + struct wdt87xx_data *wdt = i2c_get_clientdata(client); + int error; + + error = wdt87xx_validate_firmware(wdt, fw); + if (error) + return error; + + error = mutex_lock_interruptible(&wdt->fw_mutex); + if (error) + return error; + + disable_irq(client->irq); + + error = wdt87xx_load_chunk(client, fw, chunk_id); + if (error) { + dev_err(&client->dev, + "firmware load failed (type: %d): %d\n", + chunk_id, error); + goto out; + } + + error = wdt87xx_sw_reset(client); + if (error) { + dev_err(&client->dev, "soft reset failed: %d\n", error); + goto out; + } + + /* Refresh the parameters */ + error = wdt87xx_get_sysparam(client, &wdt->param); + if (error) + dev_err(&client->dev, + "failed to refresh system paramaters: %d\n", error); +out: + enable_irq(client->irq); + mutex_unlock(&wdt->fw_mutex); + + return error ? error : 0; +} + +static int wdt87xx_update_firmware(struct device *dev, + const char *fw_name, unsigned int chunk_id) +{ + struct i2c_client *client = to_i2c_client(dev); + const struct firmware *fw; + int error; + + error = request_firmware(&fw, fw_name, dev); + if (error) { + dev_err(&client->dev, "unable to retrieve firmware %s: %d\n", + fw_name, error); + return error; + } + + error = wdt87xx_do_update_firmware(client, fw, chunk_id); + + release_firmware(fw); + + return error ? error : 0; +} + +static ssize_t config_csum_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct i2c_client *client = to_i2c_client(dev); + struct wdt87xx_data *wdt = i2c_get_clientdata(client); + u32 cfg_csum; + + cfg_csum = wdt->param.xmls_id1; + cfg_csum = (cfg_csum << 16) | wdt->param.xmls_id2; + + return scnprintf(buf, PAGE_SIZE, "%x\n", cfg_csum); +} + +static ssize_t fw_version_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct i2c_client *client = to_i2c_client(dev); + struct wdt87xx_data *wdt = i2c_get_clientdata(client); + + return scnprintf(buf, PAGE_SIZE, "%x\n", wdt->param.fw_id); +} + +static ssize_t plat_id_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct i2c_client *client = to_i2c_client(dev); + struct wdt87xx_data *wdt = i2c_get_clientdata(client); + + return scnprintf(buf, PAGE_SIZE, "%x\n", wdt->param.plat_id); +} + +static ssize_t update_config_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + int error; + + error = wdt87xx_update_firmware(dev, WDT87XX_CFG_NAME, CHUNK_ID_CNFG); + + return error ? error : count; +} + +static ssize_t update_fw_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + int error; + + error = wdt87xx_update_firmware(dev, WDT87XX_FW_NAME, CHUNK_ID_FRWR); + + return error ? error : count; +} + +static DEVICE_ATTR_RO(config_csum); +static DEVICE_ATTR_RO(fw_version); +static DEVICE_ATTR_RO(plat_id); +static DEVICE_ATTR_WO(update_config); +static DEVICE_ATTR_WO(update_fw); + +static struct attribute *wdt87xx_attrs[] = { + &dev_attr_config_csum.attr, + &dev_attr_fw_version.attr, + &dev_attr_plat_id.attr, + &dev_attr_update_config.attr, + &dev_attr_update_fw.attr, + NULL +}; + +static const struct attribute_group wdt87xx_attr_group = { + .attrs = wdt87xx_attrs, +}; + +static void wdt87xx_report_contact(struct input_dev *input, + struct wdt87xx_sys_param *param, + u8 *buf) +{ + int finger_id; + u32 x, y; + u8 w, p; + + finger_id = (buf[FINGER_EV_V1_OFFSET_ID] >> 3) - 1; + if (finger_id < 0) + return; + + /* Check if this is an active contact */ + if (!(buf[FINGER_EV_V1_OFFSET_ID] & 0x1)) + return; + + w = buf[FINGER_EV_V1_OFFSET_W]; + p = buf[FINGER_EV_V1_OFFSET_P]; + + x = get_unaligned_le16(buf + FINGER_EV_V1_OFFSET_X); + + y = get_unaligned_le16(buf + FINGER_EV_V1_OFFSET_Y); + y = DIV_ROUND_CLOSEST(y * param->phy_h, param->phy_w); + + /* Refuse incorrect coordinates */ + if (x > param->max_x || y > param->max_y) + return; + + dev_dbg(input->dev.parent, "tip on (%d), x(%d), y(%d)\n", + finger_id, x, y); + + input_mt_slot(input, finger_id); + input_mt_report_slot_state(input, MT_TOOL_FINGER, 1); + input_report_abs(input, ABS_MT_TOUCH_MAJOR, w); + input_report_abs(input, ABS_MT_PRESSURE, p); + input_report_abs(input, ABS_MT_POSITION_X, x); + input_report_abs(input, ABS_MT_POSITION_Y, y); +} + +static irqreturn_t wdt87xx_ts_interrupt(int irq, void *dev_id) +{ + struct wdt87xx_data *wdt = dev_id; + struct i2c_client *client = wdt->client; + int i, fingers; + int error; + u8 raw_buf[WDT_V1_RAW_BUF_COUNT] = {0}; + + error = i2c_master_recv(client, raw_buf, WDT_V1_RAW_BUF_COUNT); + if (error < 0) { + dev_err(&client->dev, "read v1 raw data failed: %d\n", error); + goto irq_exit; + } + + fingers = raw_buf[TOUCH_PK_V1_OFFSET_FNGR_NUM]; + if (!fingers) + goto irq_exit; + + for (i = 0; i < WDT_MAX_FINGER; i++) + wdt87xx_report_contact(wdt->input, + &wdt->param, + &raw_buf[TOUCH_PK_V1_OFFSET_EVENT + + i * FINGER_EV_V1_SIZE]); + + input_mt_sync_frame(wdt->input); + input_sync(wdt->input); + +irq_exit: + return IRQ_HANDLED; +} + +static int wdt87xx_ts_create_input_device(struct wdt87xx_data *wdt) +{ + struct device *dev = &wdt->client->dev; + struct input_dev *input; + unsigned int res = DIV_ROUND_CLOSEST(MAX_UNIT_AXIS, wdt->param.phy_w); + int error; + + input = devm_input_allocate_device(dev); + if (!input) { + dev_err(dev, "failed to allocate input device\n"); + return -ENOMEM; + } + wdt->input = input; + + input->name = "WDT87xx Touchscreen"; + input->id.bustype = BUS_I2C; + input->phys = wdt->phys; + + input_set_abs_params(input, ABS_MT_POSITION_X, 0, + wdt->param.max_x, 0, 0); + input_set_abs_params(input, ABS_MT_POSITION_Y, 0, + wdt->param.max_y, 0, 0); + input_abs_set_res(input, ABS_MT_POSITION_X, res); + input_abs_set_res(input, ABS_MT_POSITION_Y, res); + + input_set_abs_params(input, ABS_MT_TOUCH_MAJOR, 0, 0xFF, 0, 0); + input_set_abs_params(input, ABS_MT_PRESSURE, 0, 0xFF, 0, 0); + + input_mt_init_slots(input, WDT_MAX_FINGER, + INPUT_MT_DIRECT | INPUT_MT_DROP_UNUSED); + + error = input_register_device(input); + if (error) { + dev_err(dev, "failed to register input device: %d\n", error); + return error; + } + + return 0; +} + +static int wdt87xx_ts_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct wdt87xx_data *wdt; + int error; + + dev_dbg(&client->dev, "adapter=%d, client irq: %d\n", + client->adapter->nr, client->irq); + + /* Check if the I2C function is ok in this adaptor */ + if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) + return -ENXIO; + + wdt = devm_kzalloc(&client->dev, sizeof(*wdt), GFP_KERNEL); + if (!wdt) + return -ENOMEM; + + wdt->client = client; + mutex_init(&wdt->fw_mutex); + i2c_set_clientdata(client, wdt); + + snprintf(wdt->phys, sizeof(wdt->phys), "i2c-%u-%04x/input0", + client->adapter->nr, client->addr); + + error = wdt87xx_get_sysparam(client, &wdt->param); + if (error) + return error; + + error = wdt87xx_ts_create_input_device(wdt); + if (error) + return error; + + error = devm_request_threaded_irq(&client->dev, client->irq, + NULL, wdt87xx_ts_interrupt, + IRQF_ONESHOT, + client->name, wdt); + if (error) { + dev_err(&client->dev, "request irq failed: %d\n", error); + return error; + } + + error = sysfs_create_group(&client->dev.kobj, &wdt87xx_attr_group); + if (error) { + dev_err(&client->dev, "create sysfs failed: %d\n", error); + return error; + } + + return 0; +} + +static int wdt87xx_ts_remove(struct i2c_client *client) +{ + sysfs_remove_group(&client->dev.kobj, &wdt87xx_attr_group); + + return 0; +} + +static int __maybe_unused wdt87xx_suspend(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + int error; + + disable_irq(client->irq); + + error = wdt87xx_send_command(client, VND_CMD_STOP, MODE_IDLE); + if (error) { + enable_irq(client->irq); + dev_err(&client->dev, + "failed to stop device when suspending: %d\n", + error); + return error; + } + + return 0; +} + +static int __maybe_unused wdt87xx_resume(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + int error; + + /* + * The chip may have been reset while system is resuming, + * give it some time to settle. + */ + mdelay(100); + + error = wdt87xx_send_command(client, VND_CMD_START, 0); + if (error) + dev_err(&client->dev, + "failed to start device when resuming: %d\n", + error); + + enable_irq(client->irq); + + return 0; +} + +static SIMPLE_DEV_PM_OPS(wdt87xx_pm_ops, wdt87xx_suspend, wdt87xx_resume); + +static const struct i2c_device_id wdt87xx_dev_id[] = { + { WDT87XX_NAME, 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, wdt87xx_dev_id); + +static const struct acpi_device_id wdt87xx_acpi_id[] = { + { "WDHT0001", 0 }, + { } +}; +MODULE_DEVICE_TABLE(acpi, wdt87xx_acpi_id); + +static struct i2c_driver wdt87xx_driver = { + .probe = wdt87xx_ts_probe, + .remove = wdt87xx_ts_remove, + .id_table = wdt87xx_dev_id, + .driver = { + .name = WDT87XX_NAME, + .pm = &wdt87xx_pm_ops, + .acpi_match_table = ACPI_PTR(wdt87xx_acpi_id), + }, +}; +module_i2c_driver(wdt87xx_driver); + +MODULE_AUTHOR("HN Chen "); +MODULE_DESCRIPTION("WeidaHiTech WDT87XX Touchscreen driver"); +MODULE_VERSION(WDT87XX_DRV_VER); +MODULE_LICENSE("GPL"); -- cgit v0.10.2 From 3e2b03dad54bbcab5be948629a644d55ce7b5a2e Mon Sep 17 00:00:00 2001 From: Anshul Garg Date: Thu, 25 Jun 2015 13:33:12 -0700 Subject: Input: use for_each_set_bit() where appropriate Instead of iterating over all bits in a bitmap and test them individually let's siwtch to for_each_set_bit() which is more compact and is also faster. Also use bitmap_weight() when counting number of set bits. This also fixes INPUT_DO_TOGGLE() implementation as it should have used *_CNT as the upper boundary, not *_MAX. Signed-off-by: Anshul Garg Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/input.c b/drivers/input/input.c index f315784..78d2499 100644 --- a/drivers/input/input.c +++ b/drivers/input/input.c @@ -677,12 +677,9 @@ static void input_dev_release_keys(struct input_dev *dev) int code; if (is_event_supported(EV_KEY, dev->evbit, EV_MAX)) { - for (code = 0; code <= KEY_MAX; code++) { - if (is_event_supported(code, dev->keybit, KEY_MAX) && - __test_and_clear_bit(code, dev->key)) { - input_pass_event(dev, EV_KEY, code, 0); - } - } + for_each_set_bit(code, dev->key, KEY_CNT) + input_pass_event(dev, EV_KEY, code, 0); + memset(dev->key, 0, sizeof(dev->key)); input_pass_event(dev, EV_SYN, SYN_REPORT, 1); } } @@ -1626,10 +1623,7 @@ static int input_dev_uevent(struct device *device, struct kobj_uevent_env *env) if (!test_bit(EV_##type, dev->evbit)) \ break; \ \ - for (i = 0; i < type##_MAX; i++) { \ - if (!test_bit(i, dev->bits##bit)) \ - continue; \ - \ + for_each_set_bit(i, dev->bits##bit, type##_CNT) { \ active = test_bit(i, dev->bits); \ if (!active && !on) \ continue; \ @@ -1980,22 +1974,12 @@ static unsigned int input_estimate_events_per_packet(struct input_dev *dev) events = mt_slots + 1; /* count SYN_MT_REPORT and SYN_REPORT */ - if (test_bit(EV_ABS, dev->evbit)) { - for (i = 0; i < ABS_CNT; i++) { - if (test_bit(i, dev->absbit)) { - if (input_is_mt_axis(i)) - events += mt_slots; - else - events++; - } - } - } + if (test_bit(EV_ABS, dev->evbit)) + for_each_set_bit(i, dev->absbit, ABS_CNT) + events += input_is_mt_axis(i) ? mt_slots : 1; - if (test_bit(EV_REL, dev->evbit)) { - for (i = 0; i < REL_CNT; i++) - if (test_bit(i, dev->relbit)) - events++; - } + if (test_bit(EV_REL, dev->evbit)) + events += bitmap_weight(dev->relbit, REL_CNT); /* Make room for KEY and MSC events */ events += 7; -- cgit v0.10.2 From 38e1b72bd8a1de4d7adb6a7cea88174e412cf4d7 Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Mon, 1 Jun 2015 10:41:11 -0700 Subject: Input: edt-ft5x06 - mark as direct input device edt-ft5x06 is a touchscreen and thus a direct input device; let's amrk it as such. This also allows us to drop some initialization code as input_init_mt_slots() will do that for us. Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/touchscreen/edt-ft5x06.c b/drivers/input/touchscreen/edt-ft5x06.c index e6aef3e..29d179a 100644 --- a/drivers/input/touchscreen/edt-ft5x06.c +++ b/drivers/input/touchscreen/edt-ft5x06.c @@ -1035,11 +1035,6 @@ static int edt_ft5x06_ts_probe(struct i2c_client *client, input->id.bustype = BUS_I2C; input->dev.parent = &client->dev; - __set_bit(EV_KEY, input->evbit); - __set_bit(EV_ABS, input->evbit); - __set_bit(BTN_TOUCH, input->keybit); - input_set_abs_params(input, ABS_X, 0, tsdata->num_x * 64 - 1, 0, 0); - input_set_abs_params(input, ABS_Y, 0, tsdata->num_y * 64 - 1, 0, 0); input_set_abs_params(input, ABS_MT_POSITION_X, 0, tsdata->num_x * 64 - 1, 0, 0); input_set_abs_params(input, ABS_MT_POSITION_Y, @@ -1048,7 +1043,7 @@ static int edt_ft5x06_ts_probe(struct i2c_client *client, if (!pdata) touchscreen_parse_of_params(input); - error = input_mt_init_slots(input, MAX_SUPPORT_POINTS, 0); + error = input_mt_init_slots(input, MAX_SUPPORT_POINTS, INPUT_MT_DIRECT); if (error) { dev_err(&client->dev, "Unable to init MT slots.\n"); return error; -- cgit v0.10.2 From 7c494375b773497228502133879072a9e959c063 Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Mon, 1 Jun 2015 10:35:16 -0700 Subject: Input: improve parsing OF parameters for touchscreens When applying touchscreen parameters specified in device tree let's make sure we keep whatever setup was done by the driver and not reset the missing values to zero. Reported-by: Pavel Machek Tested-by: Pavel Machek Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/touchscreen/edt-ft5x06.c b/drivers/input/touchscreen/edt-ft5x06.c index 29d179a..394b1de 100644 --- a/drivers/input/touchscreen/edt-ft5x06.c +++ b/drivers/input/touchscreen/edt-ft5x06.c @@ -1041,7 +1041,7 @@ static int edt_ft5x06_ts_probe(struct i2c_client *client, 0, tsdata->num_y * 64 - 1, 0, 0); if (!pdata) - touchscreen_parse_of_params(input); + touchscreen_parse_of_params(input, true); error = input_mt_init_slots(input, MAX_SUPPORT_POINTS, INPUT_MT_DIRECT); if (error) { diff --git a/drivers/input/touchscreen/of_touchscreen.c b/drivers/input/touchscreen/of_touchscreen.c index b82b520..806cd0a 100644 --- a/drivers/input/touchscreen/of_touchscreen.c +++ b/drivers/input/touchscreen/of_touchscreen.c @@ -14,14 +14,22 @@ #include #include -static u32 of_get_optional_u32(struct device_node *np, - const char *property) +static bool touchscreen_get_prop_u32(struct device_node *np, + const char *property, + unsigned int default_value, + unsigned int *value) { - u32 val = 0; + u32 val; + int error; - of_property_read_u32(np, property, &val); + error = of_property_read_u32(np, property, &val); + if (error) { + *value = default_value; + return false; + } - return val; + *value = val; + return true; } static void touchscreen_set_params(struct input_dev *dev, @@ -54,34 +62,45 @@ static void touchscreen_set_params(struct input_dev *dev, * input device accordingly. The function keeps previously setuped default * values if no value is specified via DT. */ -void touchscreen_parse_of_params(struct input_dev *dev) +void touchscreen_parse_of_params(struct input_dev *dev, bool multitouch) { struct device_node *np = dev->dev.parent->of_node; - u32 maximum, fuzz; + unsigned int axis; + unsigned int maximum, fuzz; + bool data_present; input_alloc_absinfo(dev); if (!dev->absinfo) return; - maximum = of_get_optional_u32(np, "touchscreen-size-x"); - fuzz = of_get_optional_u32(np, "touchscreen-fuzz-x"); - if (maximum || fuzz) { - touchscreen_set_params(dev, ABS_X, maximum, fuzz); - touchscreen_set_params(dev, ABS_MT_POSITION_X, maximum, fuzz); - } + axis = multitouch ? ABS_MT_POSITION_X : ABS_X; + data_present = touchscreen_get_prop_u32(np, "touchscreen-size-x", + input_abs_get_max(dev, axis), + &maximum) | + touchscreen_get_prop_u32(np, "touchscreen-fuzz-x", + input_abs_get_fuzz(dev, axis), + &fuzz); + if (data_present) + touchscreen_set_params(dev, axis, maximum, fuzz); - maximum = of_get_optional_u32(np, "touchscreen-size-y"); - fuzz = of_get_optional_u32(np, "touchscreen-fuzz-y"); - if (maximum || fuzz) { - touchscreen_set_params(dev, ABS_Y, maximum, fuzz); - touchscreen_set_params(dev, ABS_MT_POSITION_Y, maximum, fuzz); - } + axis = multitouch ? ABS_MT_POSITION_Y : ABS_Y; + data_present = touchscreen_get_prop_u32(np, "touchscreen-size-y", + input_abs_get_max(dev, axis), + &maximum) | + touchscreen_get_prop_u32(np, "touchscreen-fuzz-y", + input_abs_get_fuzz(dev, axis), + &fuzz); + if (data_present) + touchscreen_set_params(dev, axis, maximum, fuzz); - maximum = of_get_optional_u32(np, "touchscreen-max-pressure"); - fuzz = of_get_optional_u32(np, "touchscreen-fuzz-pressure"); - if (maximum || fuzz) { - touchscreen_set_params(dev, ABS_PRESSURE, maximum, fuzz); - touchscreen_set_params(dev, ABS_MT_PRESSURE, maximum, fuzz); - } + axis = multitouch ? ABS_MT_PRESSURE : ABS_PRESSURE; + data_present = touchscreen_get_prop_u32(np, "touchscreen-max-pressure", + input_abs_get_max(dev, axis), + &maximum) | + touchscreen_get_prop_u32(np, "touchscreen-fuzz-pressure", + input_abs_get_fuzz(dev, axis), + &fuzz); + if (data_present) + touchscreen_set_params(dev, axis, maximum, fuzz); } EXPORT_SYMBOL(touchscreen_parse_of_params); diff --git a/drivers/input/touchscreen/tsc2005.c b/drivers/input/touchscreen/tsc2005.c index 72657c5..d8c025b 100644 --- a/drivers/input/touchscreen/tsc2005.c +++ b/drivers/input/touchscreen/tsc2005.c @@ -709,7 +709,7 @@ static int tsc2005_probe(struct spi_device *spi) input_set_abs_params(input_dev, ABS_PRESSURE, 0, max_p, fudge_p, 0); if (np) - touchscreen_parse_of_params(input_dev); + touchscreen_parse_of_params(input_dev, false); input_dev->open = tsc2005_open; input_dev->close = tsc2005_close; diff --git a/include/linux/input/touchscreen.h b/include/linux/input/touchscreen.h index 08a5ef6..eecc9ea 100644 --- a/include/linux/input/touchscreen.h +++ b/include/linux/input/touchscreen.h @@ -12,9 +12,10 @@ #include #ifdef CONFIG_OF -void touchscreen_parse_of_params(struct input_dev *dev); +void touchscreen_parse_of_params(struct input_dev *dev, bool multitouch); #else -static inline void touchscreen_parse_of_params(struct input_dev *dev) +static inline void touchscreen_parse_of_params(struct input_dev *dev, + bool multitouch) { } #endif -- cgit v0.10.2 From 11ddba28325a66c2d38dbf987e2d5da790c6d684 Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Mon, 29 Jun 2015 11:56:27 -0700 Subject: Input: wdt87xx_i2c - fix format warning This fixes the following warning: drivers/input/touchscreen/wdt87xx_i2c.c: In function 'wdt87xx_validate_firmware': >> drivers/input/touchscreen/wdt87xx_i2c.c:472:4: warning: format '%zd' expects argument of type 'signed size_t', but argument 4 has type 'size_t' [-Wformat=] size, fw->size); Reported-by: kbuild test robot Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/touchscreen/wdt87xx_i2c.c b/drivers/input/touchscreen/wdt87xx_i2c.c index c073ea9..43c3bee 100644 --- a/drivers/input/touchscreen/wdt87xx_i2c.c +++ b/drivers/input/touchscreen/wdt87xx_i2c.c @@ -468,7 +468,7 @@ static int wdt87xx_validate_firmware(struct wdt87xx_data *wdt, size = get_unaligned_le32(fw->data + FW_SIZE_OFFSET); if (size != fw->size) { dev_err(&wdt->client->dev, - "fw size mismatch: expected %d, actual %zd\n", + "fw size mismatch: expected %d, actual %zu\n", size, fw->size); return -EINVAL; } -- cgit v0.10.2 From 580a64bf2b712e43ea04bdded17d7049e7b06ce6 Mon Sep 17 00:00:00 2001 From: Sebastian Ott Date: Mon, 29 Jun 2015 12:13:05 -0700 Subject: Input: arc_ps2 - add HAS_IOMEM dependency Fix this compile error: drivers/built-in.o: In function `arc_ps2_probe': /mnt/linux/drivers/input/serio/arc_ps2.c:206: undefined reference to `devm_ioremap_resource' Signed-off-by: Sebastian Ott Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/serio/Kconfig b/drivers/input/serio/Kconfig index 77833d7..200841b 100644 --- a/drivers/input/serio/Kconfig +++ b/drivers/input/serio/Kconfig @@ -244,6 +244,7 @@ config SERIO_PS2MULT config SERIO_ARC_PS2 tristate "ARC PS/2 support" + depends on HAS_IOMEM help Say Y here if you have an ARC FPGA platform with a PS/2 controller in it. -- cgit v0.10.2 From 57ff96e0f08bb16c49f66250c9d90452dbbf1293 Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Tue, 30 Jun 2015 11:28:43 -0700 Subject: Input: wdt87xx_i2c - remove stray newline in diagnostic message There is no reason to have a newline between plat_id and xml_id1. Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/touchscreen/wdt87xx_i2c.c b/drivers/input/touchscreen/wdt87xx_i2c.c index 43c3bee..9eb8e8c 100644 --- a/drivers/input/touchscreen/wdt87xx_i2c.c +++ b/drivers/input/touchscreen/wdt87xx_i2c.c @@ -442,7 +442,7 @@ static int wdt87xx_get_sysparam(struct i2c_client *client, param->fw_id = get_unaligned_le16(&buf[1]); dev_info(&client->dev, - "fw_id: 0x%x, plat_id: 0x%x\nxml_id1: %04x, xml_id2: %04x\n", + "fw_id: 0x%x, plat_id: 0x%x, xml_id1: %04x, xml_id2: %04x\n", param->fw_id, param->plat_id, param->xmls_id1, param->xmls_id2); -- cgit v0.10.2 From d55d0b56b9c3a0d94ca6cc1643063610c138dde9 Mon Sep 17 00:00:00 2001 From: HungNien Chen Date: Wed, 1 Jul 2015 10:06:49 -0700 Subject: Input: wdt87xx_i2c - add a scaling factor for TOUCH_MAJOR event Get the scaling factor when it reads the sys params. The width value will multiple the factor and report the value in the TOUCH_MAJOR event. Signed-off-by: HungNien Chen Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/touchscreen/wdt87xx_i2c.c b/drivers/input/touchscreen/wdt87xx_i2c.c index 9eb8e8c..fb92ae1 100644 --- a/drivers/input/touchscreen/wdt87xx_i2c.c +++ b/drivers/input/touchscreen/wdt87xx_i2c.c @@ -23,7 +23,7 @@ #include #define WDT87XX_NAME "wdt87xx_i2c" -#define WDT87XX_DRV_VER "0.9.5" +#define WDT87XX_DRV_VER "0.9.6" #define WDT87XX_FW_NAME "wdt87xx_fw.bin" #define WDT87XX_CFG_NAME "wdt87xx_cfg.bin" @@ -83,6 +83,7 @@ #define CTL_PARAM_OFFSET_PHY_Y1 18 #define CTL_PARAM_OFFSET_PHY_W 22 #define CTL_PARAM_OFFSET_PHY_H 24 +#define CTL_PARAM_OFFSET_FACTOR 32 /* Communication commands */ #define PACKET_SIZE 56 @@ -161,6 +162,7 @@ struct wdt87xx_sys_param { u16 phy_ch_y; u16 phy_w; u16 phy_h; + u16 scaling_factor; u32 max_x; u32 max_y; }; @@ -401,7 +403,7 @@ static int wdt87xx_get_sysparam(struct i2c_client *client, u8 buf[PKT_READ_SIZE]; int error; - error = wdt87xx_get_string(client, STRIDX_PARAMETERS, buf, 32); + error = wdt87xx_get_string(client, STRIDX_PARAMETERS, buf, 34); if (error) { dev_err(&client->dev, "failed to get parameters\n"); return error; @@ -414,6 +416,10 @@ static int wdt87xx_get_sysparam(struct i2c_client *client, param->phy_w = get_unaligned_le16(buf + CTL_PARAM_OFFSET_PHY_W) / 10; param->phy_h = get_unaligned_le16(buf + CTL_PARAM_OFFSET_PHY_H) / 10; + /* Get the scaling factor of pixel to logical coordinate */ + param->scaling_factor = + get_unaligned_le16(buf + CTL_PARAM_OFFSET_FACTOR); + param->max_x = MAX_UNIT_AXIS; param->max_y = DIV_ROUND_CLOSEST(MAX_UNIT_AXIS * param->phy_h, param->phy_w); @@ -905,8 +911,8 @@ static void wdt87xx_report_contact(struct input_dev *input, u8 *buf) { int finger_id; - u32 x, y; - u8 w, p; + u32 x, y, w; + u8 p; finger_id = (buf[FINGER_EV_V1_OFFSET_ID] >> 3) - 1; if (finger_id < 0) @@ -917,6 +923,8 @@ static void wdt87xx_report_contact(struct input_dev *input, return; w = buf[FINGER_EV_V1_OFFSET_W]; + w *= param->scaling_factor; + p = buf[FINGER_EV_V1_OFFSET_P]; x = get_unaligned_le16(buf + FINGER_EV_V1_OFFSET_X); @@ -995,7 +1003,8 @@ static int wdt87xx_ts_create_input_device(struct wdt87xx_data *wdt) input_abs_set_res(input, ABS_MT_POSITION_X, res); input_abs_set_res(input, ABS_MT_POSITION_Y, res); - input_set_abs_params(input, ABS_MT_TOUCH_MAJOR, 0, 0xFF, 0, 0); + input_set_abs_params(input, ABS_MT_TOUCH_MAJOR, + 0, wdt->param.max_x, 0, 0); input_set_abs_params(input, ABS_MT_PRESSURE, 0, 0xFF, 0, 0); input_mt_init_slots(input, WDT_MAX_FINGER, -- cgit v0.10.2