From f190fd92458da3e869b4e2c6289e2c617490ae53 Mon Sep 17 00:00:00 2001 From: Daniele Palmas Date: Fri, 2 Sep 2016 10:37:56 +0200 Subject: USB: serial: simple: add support for another Infineon flashloader This patch adds support for Infineon flashloader 0x8087/0x0801. The flashloader is used in Telit LE940B modem family with Telit flashing application. Signed-off-by: Daniele Palmas Cc: stable Signed-off-by: Johan Hovold diff --git a/drivers/usb/serial/usb-serial-simple.c b/drivers/usb/serial/usb-serial-simple.c index a204782..e98b6e5 100644 --- a/drivers/usb/serial/usb-serial-simple.c +++ b/drivers/usb/serial/usb-serial-simple.c @@ -54,7 +54,8 @@ DEVICE(funsoft, FUNSOFT_IDS); /* Infineon Flashloader driver */ #define FLASHLOADER_IDS() \ { USB_DEVICE_INTERFACE_CLASS(0x058b, 0x0041, USB_CLASS_CDC_DATA) }, \ - { USB_DEVICE(0x8087, 0x0716) } + { USB_DEVICE(0x8087, 0x0716) }, \ + { USB_DEVICE(0x8087, 0x0801) } DEVICE(flashloader, FLASHLOADER_IDS); /* Google Serial USB SubClass */ -- cgit v0.10.2 From ed3d6d0ac036bcff6e4649a6f8fb987bb4e34444 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Fri, 16 Sep 2016 09:24:44 -0500 Subject: usb: musb: Fix tusb6010 compile error on blackfin We have CONFIG_BLACKFIN ifdef redefining all musb registers in musb_regs.h and tusb6010.h is never included causing a build error with blackfin-allmodconfig and COMPILE_TEST. Let's fix the issue by not building tusb6010 if CONFIG_BLACKFIN is selected. Reported-by: kbuild test robot Signed-off-by: Tony Lindgren Signed-off-by: Bin Liu Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/musb/Kconfig b/drivers/usb/musb/Kconfig index 886526b..73cfa13 100644 --- a/drivers/usb/musb/Kconfig +++ b/drivers/usb/musb/Kconfig @@ -87,7 +87,7 @@ config USB_MUSB_DA8XX config USB_MUSB_TUSB6010 tristate "TUSB6010" depends on HAS_IOMEM - depends on ARCH_OMAP2PLUS || COMPILE_TEST + depends on (ARCH_OMAP2PLUS || COMPILE_TEST) && !BLACKFIN depends on NOP_USB_XCEIV = USB_MUSB_HDRC # both built-in or both modules config USB_MUSB_OMAP2PLUS -- cgit v0.10.2 From 08c5cd37480f59ea39682f4585d92269be6b1424 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Fri, 16 Sep 2016 10:24:26 -0400 Subject: USB: change bInterval default to 10 ms Some full-speed mceusb infrared transceivers contain invalid endpoint descriptors for their interrupt endpoints, with bInterval set to 0. In the past they have worked out okay with the mceusb driver, because the driver sets the bInterval field in the descriptor to 1, overwriting whatever value may have been there before. However, this approach was never sanctioned by the USB core, and in fact it does not work with xHCI controllers, because they use the bInterval value that was present when the configuration was installed. Currently usbcore uses 32 ms as the default interval if the value in the endpoint descriptor is invalid. It turns out that these IR transceivers don't work properly unless the interval is set to 10 ms or below. To work around this mceusb problem, this patch changes the endpoint-descriptor parsing routine, making the default interval value be 10 ms rather than 32 ms. Signed-off-by: Alan Stern Tested-by: Wade Berrier CC: Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/core/config.c b/drivers/usb/core/config.c index 15ce4ab..a2d90ac 100644 --- a/drivers/usb/core/config.c +++ b/drivers/usb/core/config.c @@ -240,8 +240,10 @@ static int usb_parse_endpoint(struct device *ddev, int cfgno, int inum, memcpy(&endpoint->desc, d, n); INIT_LIST_HEAD(&endpoint->urb_list); - /* Fix up bInterval values outside the legal range. Use 32 ms if no - * proper value can be guessed. */ + /* + * Fix up bInterval values outside the legal range. + * Use 10 or 8 ms if no proper value can be guessed. + */ i = 0; /* i = min, j = max, n = default */ j = 255; if (usb_endpoint_xfer_int(d)) { @@ -250,13 +252,15 @@ static int usb_parse_endpoint(struct device *ddev, int cfgno, int inum, case USB_SPEED_SUPER_PLUS: case USB_SPEED_SUPER: case USB_SPEED_HIGH: - /* Many device manufacturers are using full-speed + /* + * Many device manufacturers are using full-speed * bInterval values in high-speed interrupt endpoint - * descriptors. Try to fix those and fall back to a - * 32 ms default value otherwise. */ + * descriptors. Try to fix those and fall back to an + * 8-ms default value otherwise. + */ n = fls(d->bInterval*8); if (n == 0) - n = 9; /* 32 ms = 2^(9-1) uframes */ + n = 7; /* 8 ms = 2^(7-1) uframes */ j = 16; /* @@ -271,10 +275,12 @@ static int usb_parse_endpoint(struct device *ddev, int cfgno, int inum, } break; default: /* USB_SPEED_FULL or _LOW */ - /* For low-speed, 10 ms is the official minimum. + /* + * For low-speed, 10 ms is the official minimum. * But some "overclocked" devices might want faster - * polling so we'll allow it. */ - n = 32; + * polling so we'll allow it. + */ + n = 10; break; } } else if (usb_endpoint_xfer_isoc(d)) { @@ -282,10 +288,10 @@ static int usb_parse_endpoint(struct device *ddev, int cfgno, int inum, j = 16; switch (to_usb_device(ddev)->speed) { case USB_SPEED_HIGH: - n = 9; /* 32 ms = 2^(9-1) uframes */ + n = 7; /* 8 ms = 2^(7-1) uframes */ break; default: /* USB_SPEED_FULL */ - n = 6; /* 32 ms = 2^(6-1) frames */ + n = 4; /* 8 ms = 2^(4-1) frames */ break; } } -- cgit v0.10.2