From aecb2b6eac6ee596f34a54fb164138756895c78a Mon Sep 17 00:00:00 2001 From: Jason Jin Date: Sat, 19 Apr 2008 15:07:56 +0800 Subject: [POWERPC] 86xx: Fix the wrong serial1 interrupt for 8610 board Signed-off-by: Jason Jin Signed-off-by: Kumar Gala diff --git a/arch/powerpc/boot/dts/mpc8610_hpcd.dts b/arch/powerpc/boot/dts/mpc8610_hpcd.dts index 1f2f1e0..255dfef 100644 --- a/arch/powerpc/boot/dts/mpc8610_hpcd.dts +++ b/arch/powerpc/boot/dts/mpc8610_hpcd.dts @@ -105,7 +105,7 @@ compatible = "ns16550"; reg = <0x4600 0x100>; clock-frequency = <0>; - interrupts = <28 2>; + interrupts = <42 2>; interrupt-parent = <&mpic>; }; -- cgit v0.10.2 From 80791be11145f7dd7f68c84741fc66e5164b7353 Mon Sep 17 00:00:00 2001 From: Grant Likely Date: Thu, 1 May 2008 11:05:58 -0600 Subject: [POWERPC] mpc5200: Allow for fixed speed MII configurations Various improvements for configuring the MPC5200 MII link from the device tree: * Look for 'current-speed' property for fixed speed MII links * Look for 'fsl,7-wire-mode' property for boards using the 7 wire mode * move definition of private data structure out of the header file Signed-off-by: Grant Likely Acked-by: Wolfgang Grandegger diff --git a/Documentation/powerpc/mpc52xx-device-tree-bindings.txt b/Documentation/powerpc/mpc52xx-device-tree-bindings.txt index cda7a7d..6f12f1c 100644 --- a/Documentation/powerpc/mpc52xx-device-tree-bindings.txt +++ b/Documentation/powerpc/mpc52xx-device-tree-bindings.txt @@ -237,6 +237,17 @@ Each GPIO controller node should have the empty property gpio-controller and according to the bit numbers in the GPIO control registers. The second cell is for flags which is currently unsused. +8) FEC nodes +The FEC node can specify one of the following properties to configure +the MII link: +"fsl,7-wire-mode" - An empty property that specifies the link uses 7-wire + mode instead of MII +"current-speed" - Specifies that the MII should be configured for a fixed + speed. This property should contain two cells. The + first cell specifies the speed in Mbps and the second + should be '0' for half duplex and '1' for full duplex +"phy-handle" - Contains a phandle to an Ethernet PHY. + IV - Extra Notes ================ diff --git a/drivers/net/fec_mpc52xx.c b/drivers/net/fec_mpc52xx.c index d21b7ab..5f9c42e 100644 --- a/drivers/net/fec_mpc52xx.c +++ b/drivers/net/fec_mpc52xx.c @@ -43,6 +43,29 @@ #define DRIVER_NAME "mpc52xx-fec" +#define FEC5200_PHYADDR_NONE (-1) +#define FEC5200_PHYADDR_7WIRE (-2) + +/* Private driver data structure */ +struct mpc52xx_fec_priv { + int duplex; + int speed; + int r_irq; + int t_irq; + struct mpc52xx_fec __iomem *fec; + struct bcom_task *rx_dmatsk; + struct bcom_task *tx_dmatsk; + spinlock_t lock; + int msg_enable; + + /* MDIO link details */ + int phy_addr; + unsigned int phy_speed; + struct phy_device *phydev; + enum phy_state link; +}; + + static irqreturn_t mpc52xx_fec_interrupt(int, void *); static irqreturn_t mpc52xx_fec_rx_interrupt(int, void *); static irqreturn_t mpc52xx_fec_tx_interrupt(int, void *); @@ -223,7 +246,7 @@ static int mpc52xx_fec_phy_start(struct net_device *dev) struct mpc52xx_fec_priv *priv = netdev_priv(dev); int err; - if (!priv->has_phy) + if (priv->phy_addr < 0) return 0; err = mpc52xx_fec_init_phy(dev); @@ -243,7 +266,7 @@ static void mpc52xx_fec_phy_stop(struct net_device *dev) { struct mpc52xx_fec_priv *priv = netdev_priv(dev); - if (!priv->has_phy) + if (!priv->phydev) return; phy_disconnect(priv->phydev); @@ -255,7 +278,7 @@ static void mpc52xx_fec_phy_stop(struct net_device *dev) static int mpc52xx_fec_phy_mii_ioctl(struct mpc52xx_fec_priv *priv, struct mii_ioctl_data *mii_data, int cmd) { - if (!priv->has_phy) + if (!priv->phydev) return -ENOTSUPP; return phy_mii_ioctl(priv->phydev, mii_data, cmd); @@ -265,7 +288,7 @@ static void mpc52xx_fec_phy_hw_init(struct mpc52xx_fec_priv *priv) { struct mpc52xx_fec __iomem *fec = priv->fec; - if (!priv->has_phy) + if (priv->phydev) return; out_be32(&fec->mii_speed, priv->phy_speed); @@ -704,7 +727,7 @@ static void mpc52xx_fec_start(struct net_device *dev) rcntrl = FEC_RX_BUFFER_SIZE << 16; /* max frame length */ rcntrl |= FEC_RCNTRL_FCE; - if (priv->has_phy) + if (priv->phy_addr != FEC5200_PHYADDR_7WIRE) rcntrl |= FEC_RCNTRL_MII_MODE; if (priv->duplex == DUPLEX_FULL) @@ -864,7 +887,10 @@ mpc52xx_fec_probe(struct of_device *op, const struct of_device_id *match) struct net_device *ndev; struct mpc52xx_fec_priv *priv = NULL; struct resource mem; - const phandle *ph; + struct device_node *phy_node; + const phandle *phy_handle; + const u32 *prop; + int prop_size; phys_addr_t rx_fifo; phys_addr_t tx_fifo; @@ -948,26 +974,37 @@ mpc52xx_fec_probe(struct of_device *op, const struct of_device_id *match) mpc52xx_fec_get_paddr(ndev, ndev->dev_addr); priv->msg_enable = netif_msg_init(debug, MPC52xx_MESSAGES_DEFAULT); - priv->duplex = DUPLEX_FULL; - - /* is the phy present in device tree? */ - ph = of_get_property(op->node, "phy-handle", NULL); - if (ph) { - const unsigned int *prop; - struct device_node *phy_dn; - priv->has_phy = 1; - phy_dn = of_find_node_by_phandle(*ph); - prop = of_get_property(phy_dn, "reg", NULL); - priv->phy_addr = *prop; + /* + * Link mode configuration + */ - of_node_put(phy_dn); + /* Start with safe defaults for link connection */ + priv->phy_addr = FEC5200_PHYADDR_NONE; + priv->speed = 100; + priv->duplex = DUPLEX_HALF; + priv->phy_speed = ((mpc52xx_find_ipb_freq(op->node) >> 20) / 5) << 1; + + /* the 7-wire property means don't use MII mode */ + if (of_find_property(op->node, "fsl,7-wire-mode", NULL)) + priv->phy_addr = FEC5200_PHYADDR_7WIRE; + + /* The current speed preconfigures the speed of the MII link */ + prop = of_get_property(op->node, "current-speed", &prop_size); + if (prop && (prop_size >= sizeof(u32) * 2)) { + priv->speed = prop[0]; + priv->duplex = prop[1] ? DUPLEX_FULL : DUPLEX_HALF; + } - /* Phy speed */ - priv->phy_speed = ((mpc52xx_find_ipb_freq(op->node) >> 20) / 5) << 1; - } else { - dev_info(&ndev->dev, "can't find \"phy-handle\" in device" - " tree, using 7-wire mode\n"); + /* If there is a phy handle, setup link to that phy */ + phy_handle = of_get_property(op->node, "phy-handle", &prop_size); + if (phy_handle && (prop_size >= sizeof(phandle))) { + phy_node = of_find_node_by_phandle(*phy_handle); + prop = of_get_property(phy_node, "reg", &prop_size); + if (prop && (prop_size >= sizeof(u32))) + if ((*prop >= 0) && (*prop < PHY_MAX_ADDR)) + priv->phy_addr = *prop; + of_node_put(phy_node); } /* Hardware init */ @@ -982,6 +1019,20 @@ mpc52xx_fec_probe(struct of_device *op, const struct of_device_id *match) if (rv < 0) goto probe_error; + /* Now report the link setup */ + switch (priv->phy_addr) { + case FEC5200_PHYADDR_NONE: + dev_info(&ndev->dev, "Fixed speed MII link: %i%cD\n", + priv->speed, priv->duplex ? 'F' : 'H'); + break; + case FEC5200_PHYADDR_7WIRE: + dev_info(&ndev->dev, "using 7-wire PHY mode\n"); + break; + default: + dev_info(&ndev->dev, "Using PHY at MDIO address %i\n", + priv->phy_addr); + } + /* We're done ! */ dev_set_drvdata(&op->dev, ndev); diff --git a/drivers/net/fec_mpc52xx.h b/drivers/net/fec_mpc52xx.h index 8b1f753..a227a52 100644 --- a/drivers/net/fec_mpc52xx.h +++ b/drivers/net/fec_mpc52xx.h @@ -26,25 +26,6 @@ #define FEC_WATCHDOG_TIMEOUT ((400*HZ)/1000) -struct mpc52xx_fec_priv { - int duplex; - int r_irq; - int t_irq; - struct mpc52xx_fec __iomem *fec; - struct bcom_task *rx_dmatsk; - struct bcom_task *tx_dmatsk; - spinlock_t lock; - int msg_enable; - - int has_phy; - unsigned int phy_speed; - unsigned int phy_addr; - struct phy_device *phydev; - enum phy_state link; - int speed; -}; - - /* ======================================================================== */ /* Hardware register sets & bits */ /* ======================================================================== */ -- cgit v0.10.2 From fbe543b412cef02350fab35526a6d4dc3d20d182 Mon Sep 17 00:00:00 2001 From: Andrew Liu Date: Tue, 29 Apr 2008 17:36:25 +1000 Subject: Fix a potential issue in mpc52xx uart driver mpc52xx_uart_int and __uart_put_char both try to acquire the port->lock. Therefore the function sequence of: mpc52xx_uart_int--> ...-->flush_to_ldisc-->...-->__uart_put_char can potentially trigger a deadlock. To avoid this deadlock a fix similar to that found in the 8250.c serial driver is applied. The deadlock is avoided by releasing the lock before pushing a buffer and reacquiring it when completed. Signed-off-by: Andrew Liu Signed-off-by: Grant Likely diff --git a/drivers/serial/mpc52xx_uart.c b/drivers/serial/mpc52xx_uart.c index 7a3625f..efc971d 100644 --- a/drivers/serial/mpc52xx_uart.c +++ b/drivers/serial/mpc52xx_uart.c @@ -783,7 +783,9 @@ mpc52xx_uart_int_rx_chars(struct uart_port *port) } } + spin_unlock(&port->lock); tty_flip_buffer_push(tty); + spin_lock(&port->lock); return psc_ops->raw_rx_rdy(port); } -- cgit v0.10.2 From e598477a3a9679bd04565ef2be20cc985b8954ae Mon Sep 17 00:00:00 2001 From: Anton Vorontsov Date: Tue, 29 Apr 2008 20:41:12 +0400 Subject: [POWERPC] 86xx: mpc8610_hpcd: add support for PCI Express x8 slot This patch adds pcie node which is resposible for PCI-E x8 slot functioning. Though, this was tested using only x1 SKY2 NIC. Signed-off-by: Anton Vorontsov Signed-off-by: Kumar Gala diff --git a/arch/powerpc/boot/dts/mpc8610_hpcd.dts b/arch/powerpc/boot/dts/mpc8610_hpcd.dts index 255dfef..bba234e 100644 --- a/arch/powerpc/boot/dts/mpc8610_hpcd.dts +++ b/arch/powerpc/boot/dts/mpc8610_hpcd.dts @@ -21,6 +21,7 @@ serial1 = &serial1; pci0 = &pci0; pci1 = &pci1; + pci2 = &pci2; }; cpus { @@ -322,4 +323,24 @@ }; }; }; + + pci2: pcie@e0009000 { + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + device_type = "pci"; + compatible = "fsl,mpc8641-pcie"; + reg = <0xe0009000 0x00001000>; + ranges = <0x02000000 0 0x90000000 0x90000000 0 0x10000000 + 0x01000000 0 0x00000000 0xe2000000 0 0x00100000>; + bus-range = <0 255>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = <0x0000 0 0 1 &mpic 4 1 + 0x0000 0 0 2 &mpic 5 1 + 0x0000 0 0 3 &mpic 6 1 + 0x0000 0 0 4 &mpic 7 1>; + interrupt-parent = <&mpic>; + interrupts = <25 2>; + clock-frequency = <33333333>; + }; }; -- cgit v0.10.2 From 9941d945f491320bc121d86c558b1288ac0ad6ca Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Wed, 30 Apr 2008 16:45:58 -0700 Subject: [RAPIDIO] fix current kernel-doc notation Fix current (-git16) missing docbook/kernel-doc notation in RapidIO files. Warning(linux-2.6.25-git16//include/linux/rio.h:187): No description found for parameter 'sys_size' Warning(linux-2.6.25-git16//include/linux/rio.h:187): No description found for parameter 'phy_type' Warning(linux-2.6.25-git16//arch/powerpc/sysdev/fsl_rio.c:188): No description found for parameter 'mport' Warning(linux-2.6.25-git16//arch/powerpc/sysdev/fsl_rio.c:224): No description found for parameter 'mport' Warning(linux-2.6.25-git16//arch/powerpc/sysdev/fsl_rio.c:245): No description found for parameter 'mport' Warning(linux-2.6.25-git16//arch/powerpc/sysdev/fsl_rio.c:270): No description found for parameter 'mport' Warning(linux-2.6.25-git16//arch/powerpc/sysdev/fsl_rio.c:311): No description found for parameter 'mport' Warning(linux-2.6.25-git16//arch/powerpc/sysdev/fsl_rio.c:996): No description found for parameter 'dev' Signed-off-by: Randy Dunlap Signed-off-by: Kumar Gala diff --git a/arch/powerpc/sysdev/fsl_rio.c b/arch/powerpc/sysdev/fsl_rio.c index 3d92037..a0fa4eb 100644 --- a/arch/powerpc/sysdev/fsl_rio.c +++ b/arch/powerpc/sysdev/fsl_rio.c @@ -176,6 +176,7 @@ struct rio_priv { /** * fsl_rio_doorbell_send - Send a MPC85xx doorbell message + * @mport: RapidIO master port info * @index: ID of RapidIO interface * @destid: Destination ID of target device * @data: 16-bit info field of RapidIO doorbell message @@ -211,6 +212,7 @@ static int fsl_rio_doorbell_send(struct rio_mport *mport, /** * fsl_local_config_read - Generate a MPC85xx local config space read + * @mport: RapidIO master port info * @index: ID of RapdiIO interface * @offset: Offset into configuration space * @len: Length (in bytes) of the maintenance transaction @@ -232,6 +234,7 @@ static int fsl_local_config_read(struct rio_mport *mport, /** * fsl_local_config_write - Generate a MPC85xx local config space write + * @mport: RapidIO master port info * @index: ID of RapdiIO interface * @offset: Offset into configuration space * @len: Length (in bytes) of the maintenance transaction @@ -254,6 +257,7 @@ static int fsl_local_config_write(struct rio_mport *mport, /** * fsl_rio_config_read - Generate a MPC85xx read maintenance transaction + * @mport: RapidIO master port info * @index: ID of RapdiIO interface * @destid: Destination ID of transaction * @hopcount: Number of hops to target device @@ -295,6 +299,7 @@ fsl_rio_config_read(struct rio_mport *mport, int index, u16 destid, /** * fsl_rio_config_write - Generate a MPC85xx write maintenance transaction + * @mport: RapidIO master port info * @index: ID of RapdiIO interface * @destid: Destination ID of transaction * @hopcount: Number of hops to target device @@ -985,8 +990,8 @@ static inline void fsl_rio_info(struct device *dev, u32 ccsr) } /** - * fsl_rio_setup - Setup MPC85xx RapidIO interface - * @fsl_rio_setup - Setup Freescale PowerPC RapidIO interface + * fsl_rio_setup - Setup Freescale PowerPC RapidIO interface + * @dev: of_device pointer * * Initializes MPC85xx RapidIO hardware interface, configures * master port with system-specific info, and registers the diff --git a/include/linux/rio.h b/include/linux/rio.h index cfb66bb..0201849 100644 --- a/include/linux/rio.h +++ b/include/linux/rio.h @@ -163,6 +163,8 @@ enum rio_phy_type { * @ops: configuration space functions * @id: Port ID, unique among all ports * @index: Port index, unique among all port interfaces of the same type + * @sys_size: RapidIO common transport system size + * @phy_type: RapidIO phy type * @name: Port name string * @priv: Master port private data */ -- cgit v0.10.2 From 128cf7f2eb952a85875834c0d274da05ee0f02aa Mon Sep 17 00:00:00 2001 From: Becky Bruce Date: Thu, 1 May 2008 18:15:45 -0500 Subject: [POWERPC] Squash build warning for print of resource_size_t in fsl_soc.c When resource_size_t is larger than an int, the current code generates a build warning. Kill it. Signed-off-by: Becky Bruce Signed-off-by: Kumar Gala diff --git a/arch/powerpc/sysdev/fsl_soc.c b/arch/powerpc/sysdev/fsl_soc.c index 7b45670..b594087 100644 --- a/arch/powerpc/sysdev/fsl_soc.c +++ b/arch/powerpc/sysdev/fsl_soc.c @@ -389,8 +389,8 @@ static int __init gfar_of_init(void) } gfar_data.phy_id = *id; - snprintf(gfar_data.bus_id, MII_BUS_ID_SIZE, "%x", - res.start); + snprintf(gfar_data.bus_id, MII_BUS_ID_SIZE, "%llx", + (unsigned long long)res.start); of_node_put(phy); of_node_put(mdio); -- cgit v0.10.2 From b17b8181c97e88e6fac5aa704879ad61fdd67351 Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Wed, 30 Apr 2008 10:24:44 -0500 Subject: [POWERPC] Xilinx: Fix compile warnings arch/powerpc/sysdev/xilinx_intc.c: In function 'xilinx_intc_init': arch/powerpc/sysdev/xilinx_intc.c:111: warning: format '%08X' expects type 'unsigned int', but argument 2 has type 'resource_size_t' drivers/char/xilinx_hwicap/xilinx_hwicap.c: In function 'hwicap_setup': drivers/char/xilinx_hwicap/xilinx_hwicap.c:626: warning: cast to pointer from integer of different size drivers/char/xilinx_hwicap/xilinx_hwicap.c:646: warning: format '%x' expects type 'unsigned int', but argument 6 has type 'resource_size_t' Signed-off-by: Kumar Gala diff --git a/arch/powerpc/sysdev/xilinx_intc.c b/arch/powerpc/sysdev/xilinx_intc.c index ba8eea2..b7aefd0 100644 --- a/arch/powerpc/sysdev/xilinx_intc.c +++ b/arch/powerpc/sysdev/xilinx_intc.c @@ -107,7 +107,7 @@ xilinx_intc_init(struct device_node *np) } regs = ioremap(res.start, 32); - printk(KERN_INFO "Xilinx intc at 0x%08X mapped to 0x%p\n", + printk(KERN_INFO "Xilinx intc at 0x%08LX mapped to 0x%p\n", res.start, regs); /* Setup interrupt controller */ diff --git a/drivers/char/xilinx_hwicap/xilinx_hwicap.c b/drivers/char/xilinx_hwicap/xilinx_hwicap.c index dfe6907..3edf1fc 100644 --- a/drivers/char/xilinx_hwicap/xilinx_hwicap.c +++ b/drivers/char/xilinx_hwicap/xilinx_hwicap.c @@ -623,8 +623,8 @@ static int __devinit hwicap_setup(struct device *dev, int id, if (!request_mem_region(drvdata->mem_start, drvdata->mem_size, DRIVER_NAME)) { - dev_err(dev, "Couldn't lock memory region at %p\n", - (void *)regs_res->start); + dev_err(dev, "Couldn't lock memory region at %Lx\n", + regs_res->start); retval = -EBUSY; goto failed1; } @@ -643,7 +643,7 @@ static int __devinit hwicap_setup(struct device *dev, int id, mutex_init(&drvdata->sem); drvdata->is_open = 0; - dev_info(dev, "ioremap %lx to %p with size %x\n", + dev_info(dev, "ioremap %lx to %p with size %Lx\n", (unsigned long int)drvdata->mem_start, drvdata->base_address, drvdata->mem_size); -- cgit v0.10.2 From bbea34606269efedf7d12c608924b47bafb344f5 Mon Sep 17 00:00:00 2001 From: Geoff Levand Date: Thu, 1 May 2008 08:24:58 +1000 Subject: [POWERPC] Fix slb.c compile warnings Arrange for a syntax check to always be done on the powerpc/mm/slb.c DBG() macro by defining it to pr_debug() for non-debug builds. Also, fix these related compile warnings: slb.c:273: warning: format '%04x' expects type 'unsigned int', but argument 2 has type 'long unsigned int slb.c:274: warning: format '%04x' expects type 'unsigned int', but argument 2 has type 'long unsigned int' Signed-off-by: Geoff Levand Acked-by: Benjamin Herrenschmidt Signed-off-by: Paul Mackerras diff --git a/arch/powerpc/mm/slb.c b/arch/powerpc/mm/slb.c index 906daed..497ec05 100644 --- a/arch/powerpc/mm/slb.c +++ b/arch/powerpc/mm/slb.c @@ -30,7 +30,7 @@ #ifdef DEBUG #define DBG(fmt...) udbg_printf(fmt) #else -#define DBG(fmt...) +#define DBG pr_debug #endif extern void slb_allocate_realmode(unsigned long ea); @@ -279,8 +279,8 @@ void slb_initialize(void) patch_slb_encoding(slb_compare_rr_to_size, mmu_slb_size); - DBG("SLB: linear LLP = %04x\n", linear_llp); - DBG("SLB: io LLP = %04x\n", io_llp); + DBG("SLB: linear LLP = %04lx\n", linear_llp); + DBG("SLB: io LLP = %04lx\n", io_llp); } get_paca()->stab_rr = SLB_NUM_BOLTED; -- cgit v0.10.2 From 483d8876f75aa5707a646442377051f1b90db206 Mon Sep 17 00:00:00 2001 From: FUJITA Tomonori Date: Thu, 1 May 2008 08:25:09 +1000 Subject: [POWERPC] PS3: Add time include to lpm Add an include statement for get_tb(). Signed-off-by: FUJITA Tomonori Signed-off-by: Geoff Levand Signed-off-by: Paul Mackerras diff --git a/drivers/ps3/ps3-lpm.c b/drivers/ps3/ps3-lpm.c index 6c9592c..85edf94 100644 --- a/drivers/ps3/ps3-lpm.c +++ b/drivers/ps3/ps3-lpm.c @@ -22,6 +22,7 @@ #include #include #include +#include #include #include #include -- cgit v0.10.2 From fdedb4caea36cfc00571928a727ac87906037712 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Thu, 1 May 2008 08:25:18 +1000 Subject: [POWERPC] PS3: Make ps3_virq_setup and ps3_virq_destroy static The routines ps3_virq_setup() and ps3_virq_destroy() are used in only one file, so make them static. Signed-off-by: Geert Uytterhoeven Signed-off-by: Geoff Levand Signed-off-by: Paul Mackerras diff --git a/arch/powerpc/platforms/ps3/interrupt.c b/arch/powerpc/platforms/ps3/interrupt.c index a14e5cd..e59634f 100644 --- a/arch/powerpc/platforms/ps3/interrupt.c +++ b/arch/powerpc/platforms/ps3/interrupt.c @@ -167,8 +167,8 @@ static struct irq_chip ps3_irq_chip = { * ps3_private data. */ -int ps3_virq_setup(enum ps3_cpu_binding cpu, unsigned long outlet, - unsigned int *virq) +static int ps3_virq_setup(enum ps3_cpu_binding cpu, unsigned long outlet, + unsigned int *virq) { int result; struct ps3_private *pd; @@ -217,7 +217,7 @@ fail_create: * Clears chip data and calls irq_dispose_mapping() for the virq. */ -int ps3_virq_destroy(unsigned int virq) +static int ps3_virq_destroy(unsigned int virq) { const struct ps3_private *pd = get_irq_chip_data(virq); diff --git a/include/asm-powerpc/ps3.h b/include/asm-powerpc/ps3.h index 9e8ed68..81ffe3b 100644 --- a/include/asm-powerpc/ps3.h +++ b/include/asm-powerpc/ps3.h @@ -178,9 +178,6 @@ enum ps3_cpu_binding { PS3_BINDING_CPU_1 = 1, }; -int ps3_virq_setup(enum ps3_cpu_binding cpu, unsigned long outlet, - unsigned int *virq); -int ps3_virq_destroy(unsigned int virq); int ps3_irq_plug_setup(enum ps3_cpu_binding cpu, unsigned long outlet, unsigned int *virq); int ps3_irq_plug_destroy(unsigned int virq); -- cgit v0.10.2 From 5442381cdd311633d18f8bb52a66ede2d0fa502c Mon Sep 17 00:00:00 2001 From: Geoff Levand Date: Thu, 1 May 2008 08:25:30 +1000 Subject: [POWERPC] PS3: Remove unsupported wakeup sources Other OS wakeup is not supported from the IR controller, the bluetooth controller nor the RTC. Remove references to these in the PS3 sys-manager source. Signed-off-by: Geoff Levand Signed-off-by: Paul Mackerras diff --git a/drivers/ps3/ps3-sys-manager.c b/drivers/ps3/ps3-sys-manager.c index 7605453..f17513d 100644 --- a/drivers/ps3/ps3-sys-manager.c +++ b/drivers/ps3/ps3-sys-manager.c @@ -184,10 +184,7 @@ enum ps3_sys_manager_next_op { /** * enum ps3_sys_manager_wake_source - Next-op wakeup source (bit position mask). - * @PS3_SM_WAKE_DEFAULT: Disk insert, power button, eject button, IR - * controller, and bluetooth controller. - * @PS3_SM_WAKE_RTC: - * @PS3_SM_WAKE_RTC_ERROR: + * @PS3_SM_WAKE_DEFAULT: Disk insert, power button, eject button. * @PS3_SM_WAKE_W_O_L: Ether or wireless LAN. * @PS3_SM_WAKE_P_O_R: Power on reset. * @@ -200,8 +197,6 @@ enum ps3_sys_manager_next_op { enum ps3_sys_manager_wake_source { /* version 3 */ PS3_SM_WAKE_DEFAULT = 0, - PS3_SM_WAKE_RTC = 0x00000040, - PS3_SM_WAKE_RTC_ERROR = 0x00000080, PS3_SM_WAKE_W_O_L = 0x00000400, PS3_SM_WAKE_P_O_R = 0x80000000, }; -- cgit v0.10.2 From d9f2f3f537acb8aa04280509b2eed50c855fd3ef Mon Sep 17 00:00:00 2001 From: Geoff Levand Date: Thu, 1 May 2008 08:25:36 +1000 Subject: [POWERPC] PS3: Update ps3_defconfig Update ps3_defconfig. Signed-off-by: Geoff Levand Signed-off-by: Paul Mackerras diff --git a/arch/powerpc/configs/ps3_defconfig b/arch/powerpc/configs/ps3_defconfig index 7a64c56..71d79e4 100644 --- a/arch/powerpc/configs/ps3_defconfig +++ b/arch/powerpc/configs/ps3_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.25-rc6 -# Thu Mar 20 11:07:04 2008 +# Linux kernel version: 2.6.25 +# Mon Apr 28 12:39:10 2008 # CONFIG_PPC64=y @@ -30,6 +30,9 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y CONFIG_HAVE_SETUP_PER_CPU_AREA=y CONFIG_IRQ_PER_CPU=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_ARCH_HAS_ILOG2_U64=y @@ -73,8 +76,6 @@ CONFIG_POSIX_MQUEUE=y CONFIG_LOG_BUF_SHIFT=17 # CONFIG_CGROUPS is not set # CONFIG_GROUP_SCHED is not set -# CONFIG_USER_SCHED is not set -# CONFIG_CGROUP_SCHED is not set CONFIG_SYSFS_DEPRECATED=y CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set @@ -161,7 +162,6 @@ CONFIG_PPC_MULTIPLATFORM=y # CONFIG_PPC_PMAC is not set # CONFIG_PPC_MAPLE is not set # CONFIG_PPC_PASEMI is not set -# CONFIG_PPC_CELLEB is not set CONFIG_PPC_PS3=y # @@ -181,6 +181,7 @@ CONFIG_PS3_LPM=m CONFIG_PPC_CELL=y # CONFIG_PPC_CELL_NATIVE is not set # CONFIG_PPC_IBM_CELL_BLADE is not set +# CONFIG_PPC_CELLEB is not set # # Cell Broadband Engine options @@ -205,9 +206,9 @@ CONFIG_SPU_BASE=y # # Kernel options # -# CONFIG_TICK_ONESHOT is not set +CONFIG_TICK_ONESHOT=y # CONFIG_NO_HZ is not set -# CONFIG_HIGH_RES_TIMERS is not set +CONFIG_HIGH_RES_TIMERS=y CONFIG_GENERIC_CLOCKEVENTS_BUILD=y # CONFIG_HZ_100 is not set CONFIG_HZ_250=y @@ -221,7 +222,6 @@ CONFIG_PREEMPT_NONE=y CONFIG_BINFMT_ELF=y CONFIG_COMPAT_BINFMT_ELF=y CONFIG_BINFMT_MISC=y -CONFIG_FORCE_MAX_ZONEORDER=13 # CONFIG_IOMMU_VMERGE is not set CONFIG_IOMMU_HELPER=y CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y @@ -255,6 +255,7 @@ CONFIG_BOUNCE=y CONFIG_ARCH_MEMORY_PROBE=y # CONFIG_PPC_HAS_HASH_64K is not set # CONFIG_PPC_64K_PAGES is not set +CONFIG_FORCE_MAX_ZONEORDER=13 # CONFIG_SCHED_SMT is not set CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -272,7 +273,9 @@ CONFIG_GENERIC_ISA_DMA=y # CONFIG_PCI_SYSCALL is not set # CONFIG_ARCH_SUPPORTS_MSI is not set # CONFIG_PCCARD is not set +CONFIG_PAGE_OFFSET=0xc000000000000000 CONFIG_KERNEL_START=0xc000000000000000 +CONFIG_PHYSICAL_START=0x00000000 # # Networking @@ -292,7 +295,7 @@ CONFIG_XFRM=y # CONFIG_XFRM_STATISTICS is not set # CONFIG_NET_KEY is not set CONFIG_INET=y -# CONFIG_IP_MULTICAST is not set +CONFIG_IP_MULTICAST=y # CONFIG_IP_ADVANCED_ROUTER is not set CONFIG_IP_FIB_HASH=y CONFIG_IP_PNP=y @@ -301,6 +304,7 @@ CONFIG_IP_PNP_DHCP=y # CONFIG_IP_PNP_RARP is not set # CONFIG_NET_IPIP is not set # CONFIG_NET_IPGRE is not set +# CONFIG_IP_MROUTE is not set # CONFIG_ARPD is not set # CONFIG_SYN_COOKIES is not set # CONFIG_INET_AH is not set @@ -332,8 +336,10 @@ CONFIG_INET6_XFRM_MODE_TUNNEL=y CONFIG_INET6_XFRM_MODE_BEET=y # CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set CONFIG_IPV6_SIT=y +CONFIG_IPV6_NDISC_NODETYPE=y # CONFIG_IPV6_TUNNEL is not set # CONFIG_IPV6_MULTIPLE_TABLES is not set +# CONFIG_IPV6_MROUTE is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set @@ -392,8 +398,6 @@ CONFIG_IEEE80211=m CONFIG_IEEE80211_CRYPT_WEP=m CONFIG_IEEE80211_CRYPT_CCMP=m CONFIG_IEEE80211_CRYPT_TKIP=m -CONFIG_IEEE80211_SOFTMAC=m -# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -507,6 +511,7 @@ CONFIG_WLAN_80211=y # CONFIG_LIBERTAS is not set # CONFIG_USB_ZD1201 is not set # CONFIG_USB_NET_RNDIS_WLAN is not set +# CONFIG_IWLWIFI_LEDS is not set # CONFIG_HOSTAP is not set # @@ -578,6 +583,7 @@ CONFIG_INPUT_JOYSTICK=y # CONFIG_JOYSTICK_SPACEBALL is not set # CONFIG_JOYSTICK_STINGER is not set # CONFIG_JOYSTICK_TWIDJOY is not set +# CONFIG_JOYSTICK_ZHENHUA is not set # CONFIG_JOYSTICK_JOYDUMP is not set # CONFIG_JOYSTICK_XPAD is not set # CONFIG_INPUT_TABLET is not set @@ -641,6 +647,7 @@ CONFIG_SSB_POSSIBLE=y # Multifunction device drivers # # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set # # Multimedia devices @@ -761,10 +768,6 @@ CONFIG_SND_PS3_DEFAULT_START_DELAY=2000 # CONFIG_SND_SOC is not set # -# SoC Audio support for SuperH -# - -# # ALSA SoC audio for Freescale SOCs # @@ -849,6 +852,7 @@ CONFIG_USB_STORAGE=m # CONFIG_USB_STORAGE_ALAUDA is not set # CONFIG_USB_STORAGE_ONETOUCH is not set # CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set # CONFIG_USB_LIBUSUAL is not set # @@ -893,10 +897,6 @@ CONFIG_USB_MON=y # CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set - -# -# Userspace I/O -# # CONFIG_UIO is not set # @@ -986,7 +986,6 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set CONFIG_NFS_V4=y -# CONFIG_NFS_DIRECTIO is not set # CONFIG_NFSD is not set CONFIG_ROOT_NFS=y CONFIG_LOCKD=y @@ -1059,9 +1058,10 @@ CONFIG_NLS_ISO8859_1=y # Library routines # CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set -# CONFIG_CRC_ITU_T is not set +CONFIG_CRC_ITU_T=m CONFIG_CRC32=y # CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set @@ -1071,6 +1071,7 @@ CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y +CONFIG_HAVE_LMB=y # # Kernel hacking @@ -1078,6 +1079,7 @@ CONFIG_HAS_DMA=y # CONFIG_PRINTK_TIME is not set CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=2048 CONFIG_MAGIC_SYSRQ=y # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set @@ -1093,12 +1095,16 @@ CONFIG_SCHED_DEBUG=y # CONFIG_RT_MUTEX_TESTER is not set CONFIG_DEBUG_SPINLOCK=y CONFIG_DEBUG_MUTEXES=y +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set CONFIG_DEBUG_SPINLOCK_SLEEP=y # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_DEBUG_KOBJECT is not set CONFIG_DEBUG_BUGVERBOSE=y CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set CONFIG_DEBUG_LIST=y # CONFIG_DEBUG_SG is not set # CONFIG_BOOT_PRINTK_DELAY is not set @@ -1121,51 +1127,81 @@ CONFIG_IRQSTACKS=y # CONFIG_SECURITY is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y + +# +# Crypto core or helper +# CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_AEAD=m CONFIG_CRYPTO_BLKCIPHER=y -CONFIG_CRYPTO_SEQIV=m CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_GF128MUL=m +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +CONFIG_CRYPTO_CCM=m +CONFIG_CRYPTO_GCM=m +CONFIG_CRYPTO_SEQIV=m + +# +# Block modes +# +CONFIG_CRYPTO_CBC=y +CONFIG_CRYPTO_CTR=m +# CONFIG_CRYPTO_CTS is not set +CONFIG_CRYPTO_ECB=m +# CONFIG_CRYPTO_LRW is not set +CONFIG_CRYPTO_PCBC=m +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set -# CONFIG_CRYPTO_NULL is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y +CONFIG_CRYPTO_MICHAEL_MIC=m # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_WP512 is not set # CONFIG_CRYPTO_TGR192 is not set -CONFIG_CRYPTO_GF128MUL=m -CONFIG_CRYPTO_ECB=m -CONFIG_CRYPTO_CBC=y -CONFIG_CRYPTO_PCBC=m -# CONFIG_CRYPTO_LRW is not set -# CONFIG_CRYPTO_XTS is not set -CONFIG_CRYPTO_CTR=m -CONFIG_CRYPTO_GCM=m -CONFIG_CRYPTO_CCM=m -# CONFIG_CRYPTO_CRYPTD is not set -CONFIG_CRYPTO_DES=y -# CONFIG_CRYPTO_FCRYPT is not set -# CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_TWOFISH is not set -# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# CONFIG_CRYPTO_AES=m +# CONFIG_CRYPTO_ANUBIS is not set +CONFIG_CRYPTO_ARC4=m +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_CAST5 is not set # CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_TEA is not set -CONFIG_CRYPTO_ARC4=m +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_ANUBIS is not set -# CONFIG_CRYPTO_SEED is not set CONFIG_CRYPTO_SALSA20=m +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# # CONFIG_CRYPTO_DEFLATE is not set -CONFIG_CRYPTO_MICHAEL_MIC=m -# CONFIG_CRYPTO_CRC32C is not set -# CONFIG_CRYPTO_CAMELLIA is not set -# CONFIG_CRYPTO_TEST is not set -# CONFIG_CRYPTO_AUTHENC is not set CONFIG_CRYPTO_LZO=m CONFIG_CRYPTO_HW=y # CONFIG_PPC_CLOCK is not set +# CONFIG_VIRTUALIZATION is not set -- cgit v0.10.2 From 3b5750644b2ffa2a76fdfe7b4e00e4af2ecf3539 Mon Sep 17 00:00:00 2001 From: Paul Mackerras Date: Fri, 2 May 2008 14:29:12 +1000 Subject: [POWERPC] Bolt in SLB entry for kernel stack on secondary cpus This fixes a regression reported by Kamalesh Bulabel where a POWER4 machine would crash because of an SLB miss at a point where the SLB miss exception was unrecoverable. This regression is tracked at: http://bugzilla.kernel.org/show_bug.cgi?id=10082 SLB misses at such points shouldn't happen because the kernel stack is the only memory accessed other than things in the first segment of the linear mapping (which is mapped at all times by entry 0 of the SLB). The context switch code ensures that SLB entry 2 covers the kernel stack, if it is not already covered by entry 0. None of entries 0 to 2 are ever replaced by the SLB miss handler. Where this went wrong is that the context switch code assumes it doesn't have to write to SLB entry 2 if the new kernel stack is in the same segment as the old kernel stack, since entry 2 should already be correct. However, when we start up a secondary cpu, it calls slb_initialize, which doesn't set up entry 2. This is correct for the boot cpu, where we will be using a stack in the kernel BSS at this point (i.e. init_thread_union), but not necessarily for secondary cpus, whose initial stack can be allocated anywhere. This doesn't cause any immediate problem since the SLB miss handler will just create an SLB entry somewhere else to cover the initial stack. In fact it's possible for the cpu to go quite a long time without SLB entry 2 being valid. Eventually, though, the entry created by the SLB miss handler will get overwritten by some other entry, and if the next access to the stack is at an unrecoverable point, we get the crash. This fixes the problem by making slb_initialize create a suitable entry for the kernel stack, if we are on a secondary cpu and the stack isn't covered by SLB entry 0. This requires initializing the get_paca()->kstack field earlier, so I do that in smp_create_idle where the current field is initialized. This also abstracts a bit of the computation that mk_esid_data in slb.c does so that it can be used in slb_initialize. Signed-off-by: Paul Mackerras diff --git a/arch/powerpc/kernel/smp.c b/arch/powerpc/kernel/smp.c index be35ffae..1457aa0 100644 --- a/arch/powerpc/kernel/smp.c +++ b/arch/powerpc/kernel/smp.c @@ -386,6 +386,8 @@ static void __init smp_create_idle(unsigned int cpu) panic("failed fork for CPU %u: %li", cpu, PTR_ERR(p)); #ifdef CONFIG_PPC64 paca[cpu].__current = p; + paca[cpu].kstack = (unsigned long) task_thread_info(p) + + THREAD_SIZE - STACK_FRAME_OVERHEAD; #endif current_set[cpu] = task_thread_info(p); task_thread_info(p)->cpu = cpu; diff --git a/arch/powerpc/mm/slb.c b/arch/powerpc/mm/slb.c index 497ec05..cf8705e 100644 --- a/arch/powerpc/mm/slb.c +++ b/arch/powerpc/mm/slb.c @@ -44,13 +44,13 @@ static void slb_allocate(unsigned long ea) slb_allocate_realmode(ea); } +#define slb_esid_mask(ssize) \ + (((ssize) == MMU_SEGSIZE_256M)? ESID_MASK: ESID_MASK_1T) + static inline unsigned long mk_esid_data(unsigned long ea, int ssize, unsigned long slot) { - unsigned long mask; - - mask = (ssize == MMU_SEGSIZE_256M)? ESID_MASK: ESID_MASK_1T; - return (ea & mask) | SLB_ESID_V | slot; + return (ea & slb_esid_mask(ssize)) | SLB_ESID_V | slot; } #define slb_vsid_shift(ssize) \ @@ -301,11 +301,16 @@ void slb_initialize(void) create_shadowed_slbe(VMALLOC_START, mmu_kernel_ssize, vflags, 1); + /* For the boot cpu, we're running on the stack in init_thread_union, + * which is in the first segment of the linear mapping, and also + * get_paca()->kstack hasn't been initialized yet. + * For secondary cpus, we need to bolt the kernel stack entry now. + */ slb_shadow_clear(2); + if (raw_smp_processor_id() != boot_cpuid && + (get_paca()->kstack & slb_esid_mask(mmu_kernel_ssize)) > PAGE_OFFSET) + create_shadowed_slbe(get_paca()->kstack, + mmu_kernel_ssize, lflags, 2); - /* We don't bolt the stack for the time being - we're in boot, - * so the stack is in the bolted segment. By the time it goes - * elsewhere, we'll call _switch() which will bolt in the new - * one. */ asm volatile("isync":::"memory"); } -- cgit v0.10.2