From f6c2dd20108c35e30e2c1f3c6142d189451a626b Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Sun, 6 Jul 2014 11:39:24 -0700 Subject: hwmon: (emc2103) Clamp limits instead of bailing out It is customary to clamp limits instead of bailing out with an error if a configured limit is out of the range supported by the driver. This simplifies limit configuration, since the user will not typically know chip and/or driver specific limits. Reviewed-by: Jean Delvare Cc: stable@vger.kernel.org Signed-off-by: Guenter Roeck diff --git a/drivers/hwmon/emc2103.c b/drivers/hwmon/emc2103.c index fd892dd..78002de 100644 --- a/drivers/hwmon/emc2103.c +++ b/drivers/hwmon/emc2103.c @@ -250,9 +250,7 @@ static ssize_t set_temp_min(struct device *dev, struct device_attribute *da, if (result < 0) return result; - val = DIV_ROUND_CLOSEST(val, 1000); - if ((val < -63) || (val > 127)) - return -EINVAL; + val = clamp_val(DIV_ROUND_CLOSEST(val, 1000), -63, 127); mutex_lock(&data->update_lock); data->temp_min[nr] = val; @@ -274,9 +272,7 @@ static ssize_t set_temp_max(struct device *dev, struct device_attribute *da, if (result < 0) return result; - val = DIV_ROUND_CLOSEST(val, 1000); - if ((val < -63) || (val > 127)) - return -EINVAL; + val = clamp_val(DIV_ROUND_CLOSEST(val, 1000), -63, 127); mutex_lock(&data->update_lock); data->temp_max[nr] = val; @@ -390,15 +386,14 @@ static ssize_t set_fan_target(struct device *dev, struct device_attribute *da, { struct emc2103_data *data = emc2103_update_device(dev); struct i2c_client *client = to_i2c_client(dev); - long rpm_target; + unsigned long rpm_target; - int result = kstrtol(buf, 10, &rpm_target); + int result = kstrtoul(buf, 10, &rpm_target); if (result < 0) return result; /* Datasheet states 16384 as maximum RPM target (table 3.2) */ - if ((rpm_target < 0) || (rpm_target > 16384)) - return -EINVAL; + rpm_target = clamp_val(rpm_target, 0, 16384); mutex_lock(&data->update_lock); -- cgit v0.10.2