From f6e5b1603b8bb7131b6778d0d4e2e5dda120a379 Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Tue, 12 Apr 2011 18:06:51 +0100 Subject: drm/i915: Sanitize the output registers after resume Similar to booting, we need to inspect the state left by the BIOS and remove any conflicting bits before we take over. The example reported by Seth Forshee is very similar to the bug we encountered with the state left by grub2, that the crtc pipe<->planning mapping was reversed from our expectations and so we failed to turn off the outputs when booting or, in this case, resuming. This may be in fact the same bug, but triggered at resume time. This patch rearranges the code we already have to clear up the conflicting state upon init and calls it from reset (which is called after we have lost control of the hardware, i.e. along both the boot and resume paths) instead. Reported-and-tested-by: Seth Forshee Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=35796 Signed-off-by: Chris Wilson Cc: stable@kernel.org Reviewed-by: Keith Packard Signed-off-by: Keith Packard diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 432fc04..4fc21e0 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -6215,36 +6215,6 @@ cleanup_work: return ret; } -static void intel_crtc_reset(struct drm_crtc *crtc) -{ - struct intel_crtc *intel_crtc = to_intel_crtc(crtc); - - /* Reset flags back to the 'unknown' status so that they - * will be correctly set on the initial modeset. - */ - intel_crtc->dpms_mode = -1; -} - -static struct drm_crtc_helper_funcs intel_helper_funcs = { - .dpms = intel_crtc_dpms, - .mode_fixup = intel_crtc_mode_fixup, - .mode_set = intel_crtc_mode_set, - .mode_set_base = intel_pipe_set_base, - .mode_set_base_atomic = intel_pipe_set_base_atomic, - .load_lut = intel_crtc_load_lut, - .disable = intel_crtc_disable, -}; - -static const struct drm_crtc_funcs intel_crtc_funcs = { - .reset = intel_crtc_reset, - .cursor_set = intel_crtc_cursor_set, - .cursor_move = intel_crtc_cursor_move, - .gamma_set = intel_crtc_gamma_set, - .set_config = drm_crtc_helper_set_config, - .destroy = intel_crtc_destroy, - .page_flip = intel_crtc_page_flip, -}; - static void intel_sanitize_modesetting(struct drm_device *dev, int pipe, int plane) { @@ -6281,6 +6251,42 @@ static void intel_sanitize_modesetting(struct drm_device *dev, intel_disable_pipe(dev_priv, pipe); } +static void intel_crtc_reset(struct drm_crtc *crtc) +{ + struct drm_device *dev = crtc->dev; + struct intel_crtc *intel_crtc = to_intel_crtc(crtc); + + /* Reset flags back to the 'unknown' status so that they + * will be correctly set on the initial modeset. + */ + intel_crtc->dpms_mode = -1; + + /* We need to fix up any BIOS configuration that conflicts with + * our expectations. + */ + intel_sanitize_modesetting(dev, intel_crtc->pipe, intel_crtc->plane); +} + +static struct drm_crtc_helper_funcs intel_helper_funcs = { + .dpms = intel_crtc_dpms, + .mode_fixup = intel_crtc_mode_fixup, + .mode_set = intel_crtc_mode_set, + .mode_set_base = intel_pipe_set_base, + .mode_set_base_atomic = intel_pipe_set_base_atomic, + .load_lut = intel_crtc_load_lut, + .disable = intel_crtc_disable, +}; + +static const struct drm_crtc_funcs intel_crtc_funcs = { + .reset = intel_crtc_reset, + .cursor_set = intel_crtc_cursor_set, + .cursor_move = intel_crtc_cursor_move, + .gamma_set = intel_crtc_gamma_set, + .set_config = drm_crtc_helper_set_config, + .destroy = intel_crtc_destroy, + .page_flip = intel_crtc_page_flip, +}; + static void intel_crtc_init(struct drm_device *dev, int pipe) { drm_i915_private_t *dev_priv = dev->dev_private; @@ -6330,8 +6336,6 @@ static void intel_crtc_init(struct drm_device *dev, int pipe) setup_timer(&intel_crtc->idle_timer, intel_crtc_idle_timer, (unsigned long)intel_crtc); - - intel_sanitize_modesetting(dev, intel_crtc->pipe, intel_crtc->plane); } int intel_get_pipe_from_crtc_id(struct drm_device *dev, void *data, -- cgit v0.10.2