From 981b178964d03f6f8e6cca01568c17d1dbafdf0e Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Thu, 8 Sep 2016 11:11:35 +0200 Subject: dt-bindings: mmc: sdhci-st: Mention the discretionary "icn" clock The interconnect (ICN) clock is required for functional working of MMC on some ST platforms. When not supplied it can result in broken MMC and the following output: [ 13.916949] mmc0: Timeout waiting for hardware interrupt. [ 13.922349] sdhci: =========== REGISTER DUMP (mmc0)=========== [ 13.928175] sdhci: Sys addr: 0x00000000 | Version: 0x00001002 [ 13.933999] sdhci: Blk size: 0x00007040 | Blk cnt: 0x00000001 [ 13.939825] sdhci: Argument: 0x00fffff0 | Trn mode: 0x00000013 [ 13.945650] sdhci: Present: 0x1fff0206 | Host ctl: 0x00000011 [ 13.951475] sdhci: Power: 0x0000000f | Blk gap: 0x00000080 [ 13.957300] sdhci: Wake-up: 0x00000000 | Clock: 0x00003f07 [ 13.963126] sdhci: Timeout: 0x00000004 | Int stat: 0x00000000 [ 13.968952] sdhci: Int enab: 0x02ff008b | Sig enab: 0x02ff008b [ 13.974777] sdhci: AC12 err: 0x00000000 | Slot int: 0x00000000 [ 13.980602] sdhci: Caps: 0x21ed3281 | Caps_1: 0x00000000 [ 13.986428] sdhci: Cmd: 0x0000063a | Max curr: 0x00000000 [ 13.992252] sdhci: Host ctl2: 0x00000000 [ 13.996166] sdhci: ADMA Err: 0x00000000 | ADMA Ptr: 0x7c048200 [ 14.001990] sdhci: =========================================== [ 14.009802] mmc0: Got data interrupt 0x02000000 even though no data operation was in progress. Signed-off-by: Lee Jones Signed-off-by: Ulf Hansson diff --git a/Documentation/devicetree/bindings/mmc/sdhci-st.txt b/Documentation/devicetree/bindings/mmc/sdhci-st.txt index 88faa91..3cd4c43 100644 --- a/Documentation/devicetree/bindings/mmc/sdhci-st.txt +++ b/Documentation/devicetree/bindings/mmc/sdhci-st.txt @@ -10,7 +10,7 @@ Required properties: subsystem (mmcss) inside the FlashSS (available in STiH407 SoC family). -- clock-names: Should be "mmc". +- clock-names: Should be "mmc" and "icn". (NB: The latter is not compulsory) See: Documentation/devicetree/bindings/resource-names.txt - clocks: Phandle to the clock. See: Documentation/devicetree/bindings/clock/clock-bindings.txt -- cgit v0.10.2 From 3ae50f4512ce831e8b63eb54ad969417ff30ada7 Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Thu, 8 Sep 2016 11:11:36 +0200 Subject: mmc: sdhci-st: Handle interconnect clock Some ST platforms contain interconnect (ICN) clocks which must be handed correctly in order to obtain full functionality of a given IP. In this case, if the ICN clocks are not handled properly by the ST SDHCI driver MMC will break and the following output can be observed: [ 13.916949] mmc0: Timeout waiting for hardware interrupt. [ 13.922349] sdhci: =========== REGISTER DUMP (mmc0)=========== [ 13.928175] sdhci: Sys addr: 0x00000000 | Version: 0x00001002 [ 13.933999] sdhci: Blk size: 0x00007040 | Blk cnt: 0x00000001 [ 13.939825] sdhci: Argument: 0x00fffff0 | Trn mode: 0x00000013 [ 13.945650] sdhci: Present: 0x1fff0206 | Host ctl: 0x00000011 [ 13.951475] sdhci: Power: 0x0000000f | Blk gap: 0x00000080 [ 13.957300] sdhci: Wake-up: 0x00000000 | Clock: 0x00003f07 [ 13.963126] sdhci: Timeout: 0x00000004 | Int stat: 0x00000000 [ 13.968952] sdhci: Int enab: 0x02ff008b | Sig enab: 0x02ff008b [ 13.974777] sdhci: AC12 err: 0x00000000 | Slot int: 0x00000000 [ 13.980602] sdhci: Caps: 0x21ed3281 | Caps_1: 0x00000000 [ 13.986428] sdhci: Cmd: 0x0000063a | Max curr: 0x00000000 [ 13.992252] sdhci: Host ctl2: 0x00000000 [ 13.996166] sdhci: ADMA Err: 0x00000000 | ADMA Ptr: 0x7c048200 [ 14.001990] sdhci: =========================================== [ 14.009802] mmc0: Got data interrupt 0x02000000 even though no data operation was in progress. A decent point was raised about minimising the use of a local variable that we 'could' do without. I've chosen consistency over the possibility of reducing the local variable count by 1. Thinking that it's more important for the code to be grouped and authoured in a similar manner/style for greater maintainability/readability. Cc: stable@vger.kernel.org Tested-by: Peter Griffin Signed-off-by: Lee Jones Signed-off-by: Ulf Hansson diff --git a/drivers/mmc/host/sdhci-st.c b/drivers/mmc/host/sdhci-st.c index c95ba83..ed92ce72 100644 --- a/drivers/mmc/host/sdhci-st.c +++ b/drivers/mmc/host/sdhci-st.c @@ -28,6 +28,7 @@ struct st_mmc_platform_data { struct reset_control *rstc; + struct clk *icnclk; void __iomem *top_ioaddr; }; @@ -353,7 +354,7 @@ static int sdhci_st_probe(struct platform_device *pdev) struct sdhci_host *host; struct st_mmc_platform_data *pdata; struct sdhci_pltfm_host *pltfm_host; - struct clk *clk; + struct clk *clk, *icnclk; int ret = 0; u16 host_version; struct resource *res; @@ -365,6 +366,11 @@ static int sdhci_st_probe(struct platform_device *pdev) return PTR_ERR(clk); } + /* ICN clock isn't compulsory, but use it if it's provided. */ + icnclk = devm_clk_get(&pdev->dev, "icn"); + if (IS_ERR(icnclk)) + icnclk = NULL; + rstc = devm_reset_control_get(&pdev->dev, NULL); if (IS_ERR(rstc)) rstc = NULL; @@ -389,6 +395,7 @@ static int sdhci_st_probe(struct platform_device *pdev) } clk_prepare_enable(clk); + clk_prepare_enable(icnclk); /* Configure the FlashSS Top registers for setting eMMC TX/RX delay */ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, @@ -400,6 +407,7 @@ static int sdhci_st_probe(struct platform_device *pdev) } pltfm_host->clk = clk; + pdata->icnclk = icnclk; /* Configure the Arasan HC inside the flashSS */ st_mmcss_cconfig(np, host); @@ -422,6 +430,7 @@ static int sdhci_st_probe(struct platform_device *pdev) return 0; err_out: + clk_disable_unprepare(icnclk); clk_disable_unprepare(clk); err_of: sdhci_pltfm_free(pdev); @@ -442,6 +451,8 @@ static int sdhci_st_remove(struct platform_device *pdev) ret = sdhci_pltfm_unregister(pdev); + clk_disable_unprepare(pdata->icnclk); + if (rstc) reset_control_assert(rstc); @@ -462,6 +473,7 @@ static int sdhci_st_suspend(struct device *dev) if (pdata->rstc) reset_control_assert(pdata->rstc); + clk_disable_unprepare(pdata->icnclk); clk_disable_unprepare(pltfm_host->clk); out: return ret; @@ -475,6 +487,7 @@ static int sdhci_st_resume(struct device *dev) struct device_node *np = dev->of_node; clk_prepare_enable(pltfm_host->clk); + clk_prepare_enable(pdata->icnclk); if (pdata->rstc) reset_control_deassert(pdata->rstc); -- cgit v0.10.2 From e5789608766113ca9c30d596d93ca7d5cbd8b461 Mon Sep 17 00:00:00 2001 From: Peter Ujfalusi Date: Wed, 14 Sep 2016 14:22:07 +0300 Subject: mmc: omap_hsmmc: Initialize dma_slave_config to avoid random data It is wrong to use uninitialized dma_slave_config and configure only certain fields as the DMAengine driver might look at non initialized (random data) fields and tries to interpret it. Signed-off-by: Peter Ujfalusi Signed-off-by: Ulf Hansson diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c index 24ebc9a..5f2f24a 100644 --- a/drivers/mmc/host/omap_hsmmc.c +++ b/drivers/mmc/host/omap_hsmmc.c @@ -1409,11 +1409,18 @@ static int omap_hsmmc_pre_dma_transfer(struct omap_hsmmc_host *host, static int omap_hsmmc_setup_dma_transfer(struct omap_hsmmc_host *host, struct mmc_request *req) { - struct dma_slave_config cfg; struct dma_async_tx_descriptor *tx; int ret = 0, i; struct mmc_data *data = req->data; struct dma_chan *chan; + struct dma_slave_config cfg = { + .src_addr = host->mapbase + OMAP_HSMMC_DATA, + .dst_addr = host->mapbase + OMAP_HSMMC_DATA, + .src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES, + .dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES, + .src_maxburst = data->blksz / 4, + .dst_maxburst = data->blksz / 4, + }; /* Sanity check: all the SG entries must be aligned by block size. */ for (i = 0; i < data->sg_len; i++) { @@ -1433,13 +1440,6 @@ static int omap_hsmmc_setup_dma_transfer(struct omap_hsmmc_host *host, chan = omap_hsmmc_get_dma_chan(host, data); - cfg.src_addr = host->mapbase + OMAP_HSMMC_DATA; - cfg.dst_addr = host->mapbase + OMAP_HSMMC_DATA; - cfg.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES; - cfg.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES; - cfg.src_maxburst = data->blksz / 4; - cfg.dst_maxburst = data->blksz / 4; - ret = dmaengine_slave_config(chan, &cfg); if (ret) return ret; -- cgit v0.10.2 From df804d5e27490151da1ce9f216031a31352203e6 Mon Sep 17 00:00:00 2001 From: Peter Ujfalusi Date: Wed, 14 Sep 2016 14:21:54 +0300 Subject: mmc: omap: Initialize dma_slave_config to avoid random data in it's fields It is wrong to use uninitialized dma_slave_config and configure only certain fields as the DMAengine driver might look at non initialized (random data) fields and tries to interpret it. Signed-off-by: Peter Ujfalusi Signed-off-by: Ulf Hansson diff --git a/drivers/mmc/host/omap.c b/drivers/mmc/host/omap.c index f23d65e..be3c49f 100644 --- a/drivers/mmc/host/omap.c +++ b/drivers/mmc/host/omap.c @@ -1016,14 +1016,16 @@ mmc_omap_prepare_data(struct mmc_omap_host *host, struct mmc_request *req) /* Only reconfigure if we have a different burst size */ if (*bp != burst) { - struct dma_slave_config cfg; - - cfg.src_addr = host->phys_base + OMAP_MMC_REG(host, DATA); - cfg.dst_addr = host->phys_base + OMAP_MMC_REG(host, DATA); - cfg.src_addr_width = DMA_SLAVE_BUSWIDTH_2_BYTES; - cfg.dst_addr_width = DMA_SLAVE_BUSWIDTH_2_BYTES; - cfg.src_maxburst = burst; - cfg.dst_maxburst = burst; + struct dma_slave_config cfg = { + .src_addr = host->phys_base + + OMAP_MMC_REG(host, DATA), + .dst_addr = host->phys_base + + OMAP_MMC_REG(host, DATA), + .src_addr_width = DMA_SLAVE_BUSWIDTH_2_BYTES, + .dst_addr_width = DMA_SLAVE_BUSWIDTH_2_BYTES, + .src_maxburst = burst, + .dst_maxburst = burst, + }; if (dmaengine_slave_config(c, &cfg)) goto use_pio; -- cgit v0.10.2