From 7c367d3da697846b80058859937f606c0081beda Mon Sep 17 00:00:00 2001 From: Tomasz Figa Date: Thu, 11 Oct 2012 10:11:07 +0200 Subject: pinctrl: samsung: Detect and handle unsupported configuration types This patch modifies the pinctrl-samsung driver to detect when width of a bit field is set to zero (which means that such configuraton type is not supported) and return an error instead of trying to modify an inexistent register. Signed-off-by: Tomasz Figa Reviewed-by: Kyungmin Park Acked-by: Thomas Abraham Signed-off-by: Linus Walleij diff --git a/drivers/pinctrl/pinctrl-samsung.c b/drivers/pinctrl/pinctrl-samsung.c index dd108a9..c660fa5 100644 --- a/drivers/pinctrl/pinctrl-samsung.c +++ b/drivers/pinctrl/pinctrl-samsung.c @@ -391,6 +391,9 @@ static int samsung_pinconf_rw(struct pinctrl_dev *pctldev, unsigned int pin, return -EINVAL; } + if (!width) + return -EINVAL; + mask = (1 << width) - 1; shift = pin_offset * width; data = readl(reg_base + cfg_reg); -- cgit v0.10.2 From 62f14c0ef5d1bbd640b42a59f8f084f764a067c4 Mon Sep 17 00:00:00 2001 From: Tomasz Figa Date: Thu, 11 Oct 2012 10:11:08 +0200 Subject: pinctrl: samsung: Do not pass gpio_chip to pin_to_reg_bank The pointer to gpio_chip passed to pin_to_reg_bank utility function is used only to retrieve a pointer to samsung_pinctrl_drv_data structure. This patch modifies the function and its users to pass a pointer to samsung_pinctrl_drv_data directly. Signed-off-by: Tomasz Figa Reviewed-by: Kyungmin Park Acked-by: Thomas Abraham Signed-off-by: Linus Walleij diff --git a/drivers/pinctrl/pinctrl-samsung.c b/drivers/pinctrl/pinctrl-samsung.c index c660fa5..aa42d54 100644 --- a/drivers/pinctrl/pinctrl-samsung.c +++ b/drivers/pinctrl/pinctrl-samsung.c @@ -250,14 +250,12 @@ static int samsung_pinmux_get_groups(struct pinctrl_dev *pctldev, * given a pin number that is local to a pin controller, find out the pin bank * and the register base of the pin bank. */ -static void pin_to_reg_bank(struct gpio_chip *gc, unsigned pin, - void __iomem **reg, u32 *offset, +static void pin_to_reg_bank(struct samsung_pinctrl_drv_data *drvdata, + unsigned pin, void __iomem **reg, u32 *offset, struct samsung_pin_bank **bank) { - struct samsung_pinctrl_drv_data *drvdata; struct samsung_pin_bank *b; - drvdata = dev_get_drvdata(gc->dev); b = drvdata->ctrl->pin_banks; while ((pin >= b->pin_base) && @@ -292,7 +290,7 @@ static void samsung_pinmux_setup(struct pinctrl_dev *pctldev, unsigned selector, * pin function number in the config register. */ for (cnt = 0; cnt < drvdata->pin_groups[group].num_pins; cnt++) { - pin_to_reg_bank(drvdata->gc, pins[cnt] - drvdata->ctrl->base, + pin_to_reg_bank(drvdata, pins[cnt] - drvdata->ctrl->base, ®, &pin_offset, &bank); mask = (1 << bank->func_width) - 1; shift = pin_offset * bank->func_width; @@ -329,10 +327,13 @@ static int samsung_pinmux_gpio_set_direction(struct pinctrl_dev *pctldev, struct pinctrl_gpio_range *range, unsigned offset, bool input) { struct samsung_pin_bank *bank; + struct samsung_pinctrl_drv_data *drvdata; void __iomem *reg; u32 data, pin_offset, mask, shift; - pin_to_reg_bank(range->gc, offset, ®, &pin_offset, &bank); + drvdata = pinctrl_dev_get_drvdata(pctldev); + + pin_to_reg_bank(drvdata, offset, ®, &pin_offset, &bank); mask = (1 << bank->func_width) - 1; shift = pin_offset * bank->func_width; @@ -366,7 +367,7 @@ static int samsung_pinconf_rw(struct pinctrl_dev *pctldev, unsigned int pin, u32 cfg_value, cfg_reg; drvdata = pinctrl_dev_get_drvdata(pctldev); - pin_to_reg_bank(drvdata->gc, pin - drvdata->ctrl->base, ®_base, + pin_to_reg_bank(drvdata, pin - drvdata->ctrl->base, ®_base, &pin_offset, &bank); switch (cfg_type) { @@ -468,8 +469,11 @@ static void samsung_gpio_set(struct gpio_chip *gc, unsigned offset, int value) { void __iomem *reg; u32 pin_offset, data; + struct samsung_pinctrl_drv_data *drvdata; - pin_to_reg_bank(gc, offset, ®, &pin_offset, NULL); + drvdata = dev_get_drvdata(gc->dev); + + pin_to_reg_bank(drvdata, offset, ®, &pin_offset, NULL); data = readl(reg + DAT_REG); data &= ~(1 << pin_offset); if (value) @@ -482,8 +486,11 @@ static int samsung_gpio_get(struct gpio_chip *gc, unsigned offset) { void __iomem *reg; u32 pin_offset, data; + struct samsung_pinctrl_drv_data *drvdata; + + drvdata = dev_get_drvdata(gc->dev); - pin_to_reg_bank(gc, offset, ®, &pin_offset, NULL); + pin_to_reg_bank(drvdata, offset, ®, &pin_offset, NULL); data = readl(reg + DAT_REG); data >>= pin_offset; data &= 1; -- cgit v0.10.2 From 40ba6227aeb3712b0cea0c4f9c3e355cf801f4c4 Mon Sep 17 00:00:00 2001 From: Tomasz Figa Date: Thu, 11 Oct 2012 10:11:09 +0200 Subject: pinctrl: samsung: Assing pin numbers dynamically This patch modifies the pinctrl-samsung driver to assign numbers to pins dynamically instead of static enumerations. Thanks to this change the amount of code requried to support a SoC can be greatly reduced and the code made more readable. Signed-off-by: Tomasz Figa Reviewed-by: Kyungmin Park Acked-by: Thomas Abraham Signed-off-by: Linus Walleij diff --git a/drivers/pinctrl/pinctrl-exynos.c b/drivers/pinctrl/pinctrl-exynos.c index 21362f4..0ea2164 100644 --- a/drivers/pinctrl/pinctrl-exynos.c +++ b/drivers/pinctrl/pinctrl-exynos.c @@ -484,51 +484,51 @@ static int exynos_eint_wkup_init(struct samsung_pinctrl_drv_data *d) /* pin banks of exynos4210 pin-controller 0 */ static struct samsung_pin_bank exynos4210_pin_banks0[] = { - EXYNOS_PIN_BANK_EINTG(0x000, EXYNOS4210_GPIO_A0, "gpa0"), - EXYNOS_PIN_BANK_EINTG(0x020, EXYNOS4210_GPIO_A1, "gpa1"), - EXYNOS_PIN_BANK_EINTG(0x040, EXYNOS4210_GPIO_B, "gpb"), - EXYNOS_PIN_BANK_EINTG(0x060, EXYNOS4210_GPIO_C0, "gpc0"), - EXYNOS_PIN_BANK_EINTG(0x080, EXYNOS4210_GPIO_C1, "gpc1"), - EXYNOS_PIN_BANK_EINTG(0x0A0, EXYNOS4210_GPIO_D0, "gpd0"), - EXYNOS_PIN_BANK_EINTG(0x0C0, EXYNOS4210_GPIO_D1, "gpd1"), - EXYNOS_PIN_BANK_EINTG(0x0E0, EXYNOS4210_GPIO_E0, "gpe0"), - EXYNOS_PIN_BANK_EINTG(0x100, EXYNOS4210_GPIO_E1, "gpe1"), - EXYNOS_PIN_BANK_EINTG(0x120, EXYNOS4210_GPIO_E2, "gpe2"), - EXYNOS_PIN_BANK_EINTG(0x140, EXYNOS4210_GPIO_E3, "gpe3"), - EXYNOS_PIN_BANK_EINTG(0x160, EXYNOS4210_GPIO_E4, "gpe4"), - EXYNOS_PIN_BANK_EINTG(0x180, EXYNOS4210_GPIO_F0, "gpf0"), - EXYNOS_PIN_BANK_EINTG(0x1A0, EXYNOS4210_GPIO_F1, "gpf1"), - EXYNOS_PIN_BANK_EINTG(0x1C0, EXYNOS4210_GPIO_F2, "gpf2"), - EXYNOS_PIN_BANK_EINTG(0x1E0, EXYNOS4210_GPIO_F3, "gpf3"), + EXYNOS_PIN_BANK_EINTG(8, 0x000, "gpa0"), + EXYNOS_PIN_BANK_EINTG(6, 0x020, "gpa1"), + EXYNOS_PIN_BANK_EINTG(8, 0x040, "gpb"), + EXYNOS_PIN_BANK_EINTG(5, 0x060, "gpc0"), + EXYNOS_PIN_BANK_EINTG(5, 0x080, "gpc1"), + EXYNOS_PIN_BANK_EINTG(4, 0x0A0, "gpd0"), + EXYNOS_PIN_BANK_EINTG(4, 0x0C0, "gpd1"), + EXYNOS_PIN_BANK_EINTG(5, 0x0E0, "gpe0"), + EXYNOS_PIN_BANK_EINTG(8, 0x100, "gpe1"), + EXYNOS_PIN_BANK_EINTG(6, 0x120, "gpe2"), + EXYNOS_PIN_BANK_EINTG(8, 0x140, "gpe3"), + EXYNOS_PIN_BANK_EINTG(8, 0x160, "gpe4"), + EXYNOS_PIN_BANK_EINTG(8, 0x180, "gpf0"), + EXYNOS_PIN_BANK_EINTG(8, 0x1A0, "gpf1"), + EXYNOS_PIN_BANK_EINTG(8, 0x1C0, "gpf2"), + EXYNOS_PIN_BANK_EINTG(6, 0x1E0, "gpf3"), }; /* pin banks of exynos4210 pin-controller 1 */ static struct samsung_pin_bank exynos4210_pin_banks1[] = { - EXYNOS_PIN_BANK_EINTG(0x000, EXYNOS4210_GPIO_J0, "gpj0"), - EXYNOS_PIN_BANK_EINTG(0x020, EXYNOS4210_GPIO_J1, "gpj1"), - EXYNOS_PIN_BANK_EINTG(0x040, EXYNOS4210_GPIO_K0, "gpk0"), - EXYNOS_PIN_BANK_EINTG(0x060, EXYNOS4210_GPIO_K1, "gpk1"), - EXYNOS_PIN_BANK_EINTG(0x080, EXYNOS4210_GPIO_K2, "gpk2"), - EXYNOS_PIN_BANK_EINTG(0x0A0, EXYNOS4210_GPIO_K3, "gpk3"), - EXYNOS_PIN_BANK_EINTG(0x0C0, EXYNOS4210_GPIO_L0, "gpl0"), - EXYNOS_PIN_BANK_EINTG(0x0E0, EXYNOS4210_GPIO_L1, "gpl1"), - EXYNOS_PIN_BANK_EINTG(0x100, EXYNOS4210_GPIO_L2, "gpl2"), - EXYNOS_PIN_BANK_EINTN(0x120, EXYNOS4210_GPIO_Y0, "gpy0"), - EXYNOS_PIN_BANK_EINTN(0x140, EXYNOS4210_GPIO_Y1, "gpy1"), - EXYNOS_PIN_BANK_EINTN(0x160, EXYNOS4210_GPIO_Y2, "gpy2"), - EXYNOS_PIN_BANK_EINTN(0x180, EXYNOS4210_GPIO_Y3, "gpy3"), - EXYNOS_PIN_BANK_EINTN(0x1A0, EXYNOS4210_GPIO_Y4, "gpy4"), - EXYNOS_PIN_BANK_EINTN(0x1C0, EXYNOS4210_GPIO_Y5, "gpy5"), - EXYNOS_PIN_BANK_EINTN(0x1E0, EXYNOS4210_GPIO_Y6, "gpy6"), - EXYNOS_PIN_BANK_EINTN(0xC00, EXYNOS4210_GPIO_X0, "gpx0"), - EXYNOS_PIN_BANK_EINTN(0xC20, EXYNOS4210_GPIO_X1, "gpx1"), - EXYNOS_PIN_BANK_EINTN(0xC40, EXYNOS4210_GPIO_X2, "gpx2"), - EXYNOS_PIN_BANK_EINTN(0xC60, EXYNOS4210_GPIO_X3, "gpx3"), + EXYNOS_PIN_BANK_EINTG(8, 0x000, "gpj0"), + EXYNOS_PIN_BANK_EINTG(5, 0x020, "gpj1"), + EXYNOS_PIN_BANK_EINTG(7, 0x040, "gpk0"), + EXYNOS_PIN_BANK_EINTG(7, 0x060, "gpk1"), + EXYNOS_PIN_BANK_EINTG(7, 0x080, "gpk2"), + EXYNOS_PIN_BANK_EINTG(7, 0x0A0, "gpk3"), + EXYNOS_PIN_BANK_EINTG(8, 0x0C0, "gpl0"), + EXYNOS_PIN_BANK_EINTG(3, 0x0E0, "gpl1"), + EXYNOS_PIN_BANK_EINTG(8, 0x100, "gpl2"), + EXYNOS_PIN_BANK_EINTN(6, 0x120, "gpy0"), + EXYNOS_PIN_BANK_EINTN(4, 0x140, "gpy1"), + EXYNOS_PIN_BANK_EINTN(6, 0x160, "gpy2"), + EXYNOS_PIN_BANK_EINTN(8, 0x180, "gpy3"), + EXYNOS_PIN_BANK_EINTN(8, 0x1A0, "gpy4"), + EXYNOS_PIN_BANK_EINTN(8, 0x1C0, "gpy5"), + EXYNOS_PIN_BANK_EINTN(8, 0x1E0, "gpy6"), + EXYNOS_PIN_BANK_EINTN(8, 0xC00, "gpx0"), + EXYNOS_PIN_BANK_EINTN(8, 0xC20, "gpx1"), + EXYNOS_PIN_BANK_EINTN(8, 0xC40, "gpx2"), + EXYNOS_PIN_BANK_EINTN(8, 0xC60, "gpx3"), }; /* pin banks of exynos4210 pin-controller 2 */ static struct samsung_pin_bank exynos4210_pin_banks2[] = { - EXYNOS_PIN_BANK_EINTN(0x000, EXYNOS4210_GPIO_Z, "gpz"), + EXYNOS_PIN_BANK_EINTN(7, 0x000, "gpz"), }; /* @@ -540,9 +540,6 @@ struct samsung_pin_ctrl exynos4210_pin_ctrl[] = { /* pin-controller instance 0 data */ .pin_banks = exynos4210_pin_banks0, .nr_banks = ARRAY_SIZE(exynos4210_pin_banks0), - .base = EXYNOS4210_GPIO_A0_START, - .nr_pins = EXYNOS4210_GPIOA_NR_PINS, - .nr_gint = EXYNOS4210_GPIOA_NR_GINT, .geint_con = EXYNOS_GPIO_ECON_OFFSET, .geint_mask = EXYNOS_GPIO_EMASK_OFFSET, .geint_pend = EXYNOS_GPIO_EPEND_OFFSET, @@ -553,9 +550,6 @@ struct samsung_pin_ctrl exynos4210_pin_ctrl[] = { /* pin-controller instance 1 data */ .pin_banks = exynos4210_pin_banks1, .nr_banks = ARRAY_SIZE(exynos4210_pin_banks1), - .base = EXYNOS4210_GPIOA_NR_PINS, - .nr_pins = EXYNOS4210_GPIOB_NR_PINS, - .nr_gint = EXYNOS4210_GPIOB_NR_GINT, .nr_wint = 32, .geint_con = EXYNOS_GPIO_ECON_OFFSET, .geint_mask = EXYNOS_GPIO_EMASK_OFFSET, @@ -571,9 +565,6 @@ struct samsung_pin_ctrl exynos4210_pin_ctrl[] = { /* pin-controller instance 2 data */ .pin_banks = exynos4210_pin_banks2, .nr_banks = ARRAY_SIZE(exynos4210_pin_banks2), - .base = EXYNOS4210_GPIOA_NR_PINS + - EXYNOS4210_GPIOB_NR_PINS, - .nr_pins = EXYNOS4210_GPIOC_NR_PINS, .label = "exynos4210-gpio-ctrl2", }, }; diff --git a/drivers/pinctrl/pinctrl-exynos.h b/drivers/pinctrl/pinctrl-exynos.h index 31d0a06..1788467 100644 --- a/drivers/pinctrl/pinctrl-exynos.h +++ b/drivers/pinctrl/pinctrl-exynos.h @@ -165,11 +165,10 @@ enum exynos4210_gpio_xc_start { #define EXYNOS_EINT_MAX_PER_BANK 8 #define EXYNOS_EINT_NR_WKUP_EINT -#define EXYNOS_PIN_BANK_EINTN(reg, __gpio, id) \ +#define EXYNOS_PIN_BANK_EINTN(pins, reg, id) \ { \ .pctl_offset = reg, \ - .pin_base = (__gpio##_START), \ - .nr_pins = (__gpio##_NR), \ + .nr_pins = pins, \ .func_width = 4, \ .pud_width = 2, \ .drv_width = 2, \ @@ -179,18 +178,16 @@ enum exynos4210_gpio_xc_start { .name = id \ } -#define EXYNOS_PIN_BANK_EINTG(reg, __gpio, id) \ +#define EXYNOS_PIN_BANK_EINTG(pins, reg, id) \ { \ .pctl_offset = reg, \ - .pin_base = (__gpio##_START), \ - .nr_pins = (__gpio##_NR), \ + .nr_pins = pins, \ .func_width = 4, \ .pud_width = 2, \ .drv_width = 2, \ .conpdn_width = 2, \ .pudpdn_width = 2, \ .eint_type = EINT_TYPE_GPIO, \ - .irq_base = (__gpio##_IRQ), \ .name = id \ } diff --git a/drivers/pinctrl/pinctrl-samsung.c b/drivers/pinctrl/pinctrl-samsung.c index aa42d54..f219bb6 100644 --- a/drivers/pinctrl/pinctrl-samsung.c +++ b/drivers/pinctrl/pinctrl-samsung.c @@ -46,6 +46,8 @@ struct pin_config { { "samsung,pin-pud-pdn", PINCFG_TYPE_PUD_PDN }, }; +static unsigned int pin_base = 0; + /* check if the selector is a valid pin group selector */ static int samsung_get_group_count(struct pinctrl_dev *pctldev) { @@ -792,6 +794,9 @@ static struct samsung_pin_ctrl *samsung_pinctrl_get_soc_data( int id; const struct of_device_id *match; const struct device_node *node = pdev->dev.of_node; + struct samsung_pin_ctrl *ctrl; + struct samsung_pin_bank *bank; + int i; id = of_alias_get_id(pdev->dev.of_node, "pinctrl"); if (id < 0) { @@ -799,7 +804,22 @@ static struct samsung_pin_ctrl *samsung_pinctrl_get_soc_data( return NULL; } match = of_match_node(samsung_pinctrl_dt_match, node); - return (struct samsung_pin_ctrl *)match->data + id; + ctrl = (struct samsung_pin_ctrl *)match->data + id; + + bank = ctrl->pin_banks; + for (i = 0; i < ctrl->nr_banks; ++i, ++bank) { + bank->pin_base = ctrl->nr_pins; + ctrl->nr_pins += bank->nr_pins; + if (bank->eint_type == EINT_TYPE_GPIO) { + bank->irq_base = ctrl->nr_gint; + ctrl->nr_gint += bank->nr_pins; + } + } + + ctrl->base = pin_base; + pin_base += ctrl->nr_pins; + + return ctrl; } static int __devinit samsung_pinctrl_probe(struct platform_device *pdev) -- cgit v0.10.2 From 3a232ba86f3a93217ac717306645c5c555429858 Mon Sep 17 00:00:00 2001 From: Tomasz Figa Date: Thu, 11 Oct 2012 10:11:10 +0200 Subject: pinctrl: samsung: Remove static pin enumerations Since pin numbers are now assigned dynamically, those are not needed anymore. Signed-off-by: Tomasz Figa Reviewed-by: Kyungmin Park Acked-by: Thomas Abraham Signed-off-by: Linus Walleij diff --git a/drivers/pinctrl/pinctrl-exynos.h b/drivers/pinctrl/pinctrl-exynos.h index 1788467..2de4a29 100644 --- a/drivers/pinctrl/pinctrl-exynos.h +++ b/drivers/pinctrl/pinctrl-exynos.h @@ -17,125 +17,6 @@ * (at your option) any later version. */ -#define EXYNOS_GPIO_START(__gpio) ((__gpio##_START) + (__gpio##_NR)) - -#define EXYNOS4210_GPIO_A0_NR (8) -#define EXYNOS4210_GPIO_A1_NR (6) -#define EXYNOS4210_GPIO_B_NR (8) -#define EXYNOS4210_GPIO_C0_NR (5) -#define EXYNOS4210_GPIO_C1_NR (5) -#define EXYNOS4210_GPIO_D0_NR (4) -#define EXYNOS4210_GPIO_D1_NR (4) -#define EXYNOS4210_GPIO_E0_NR (5) -#define EXYNOS4210_GPIO_E1_NR (8) -#define EXYNOS4210_GPIO_E2_NR (6) -#define EXYNOS4210_GPIO_E3_NR (8) -#define EXYNOS4210_GPIO_E4_NR (8) -#define EXYNOS4210_GPIO_F0_NR (8) -#define EXYNOS4210_GPIO_F1_NR (8) -#define EXYNOS4210_GPIO_F2_NR (8) -#define EXYNOS4210_GPIO_F3_NR (6) -#define EXYNOS4210_GPIO_J0_NR (8) -#define EXYNOS4210_GPIO_J1_NR (5) -#define EXYNOS4210_GPIO_K0_NR (7) -#define EXYNOS4210_GPIO_K1_NR (7) -#define EXYNOS4210_GPIO_K2_NR (7) -#define EXYNOS4210_GPIO_K3_NR (7) -#define EXYNOS4210_GPIO_L0_NR (8) -#define EXYNOS4210_GPIO_L1_NR (3) -#define EXYNOS4210_GPIO_L2_NR (8) -#define EXYNOS4210_GPIO_Y0_NR (6) -#define EXYNOS4210_GPIO_Y1_NR (4) -#define EXYNOS4210_GPIO_Y2_NR (6) -#define EXYNOS4210_GPIO_Y3_NR (8) -#define EXYNOS4210_GPIO_Y4_NR (8) -#define EXYNOS4210_GPIO_Y5_NR (8) -#define EXYNOS4210_GPIO_Y6_NR (8) -#define EXYNOS4210_GPIO_X0_NR (8) -#define EXYNOS4210_GPIO_X1_NR (8) -#define EXYNOS4210_GPIO_X2_NR (8) -#define EXYNOS4210_GPIO_X3_NR (8) -#define EXYNOS4210_GPIO_Z_NR (7) - -enum exynos4210_gpio_xa_start { - EXYNOS4210_GPIO_A0_START = 0, - EXYNOS4210_GPIO_A1_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_A0), - EXYNOS4210_GPIO_B_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_A1), - EXYNOS4210_GPIO_C0_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_B), - EXYNOS4210_GPIO_C1_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_C0), - EXYNOS4210_GPIO_D0_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_C1), - EXYNOS4210_GPIO_D1_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_D0), - EXYNOS4210_GPIO_E0_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_D1), - EXYNOS4210_GPIO_E1_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_E0), - EXYNOS4210_GPIO_E2_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_E1), - EXYNOS4210_GPIO_E3_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_E2), - EXYNOS4210_GPIO_E4_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_E3), - EXYNOS4210_GPIO_F0_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_E4), - EXYNOS4210_GPIO_F1_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_F0), - EXYNOS4210_GPIO_F2_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_F1), - EXYNOS4210_GPIO_F3_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_F2), -}; - -enum exynos4210_gpio_xb_start { - EXYNOS4210_GPIO_J0_START = 0, - EXYNOS4210_GPIO_J1_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_J0), - EXYNOS4210_GPIO_K0_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_J1), - EXYNOS4210_GPIO_K1_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_K0), - EXYNOS4210_GPIO_K2_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_K1), - EXYNOS4210_GPIO_K3_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_K2), - EXYNOS4210_GPIO_L0_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_K3), - EXYNOS4210_GPIO_L1_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_L0), - EXYNOS4210_GPIO_L2_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_L1), - EXYNOS4210_GPIO_Y0_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_L2), - EXYNOS4210_GPIO_Y1_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_Y0), - EXYNOS4210_GPIO_Y2_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_Y1), - EXYNOS4210_GPIO_Y3_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_Y2), - EXYNOS4210_GPIO_Y4_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_Y3), - EXYNOS4210_GPIO_Y5_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_Y4), - EXYNOS4210_GPIO_Y6_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_Y5), - EXYNOS4210_GPIO_X0_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_Y6), - EXYNOS4210_GPIO_X1_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_X0), - EXYNOS4210_GPIO_X2_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_X1), - EXYNOS4210_GPIO_X3_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_X2), -}; - -enum exynos4210_gpio_xc_start { - EXYNOS4210_GPIO_Z_START = 0, -}; - -#define EXYNOS4210_GPIO_A0_IRQ EXYNOS4210_GPIO_A0_START -#define EXYNOS4210_GPIO_A1_IRQ EXYNOS4210_GPIO_A1_START -#define EXYNOS4210_GPIO_B_IRQ EXYNOS4210_GPIO_B_START -#define EXYNOS4210_GPIO_C0_IRQ EXYNOS4210_GPIO_C0_START -#define EXYNOS4210_GPIO_C1_IRQ EXYNOS4210_GPIO_C1_START -#define EXYNOS4210_GPIO_D0_IRQ EXYNOS4210_GPIO_D0_START -#define EXYNOS4210_GPIO_D1_IRQ EXYNOS4210_GPIO_D1_START -#define EXYNOS4210_GPIO_E0_IRQ EXYNOS4210_GPIO_E0_START -#define EXYNOS4210_GPIO_E1_IRQ EXYNOS4210_GPIO_E1_START -#define EXYNOS4210_GPIO_E2_IRQ EXYNOS4210_GPIO_E2_START -#define EXYNOS4210_GPIO_E3_IRQ EXYNOS4210_GPIO_E3_START -#define EXYNOS4210_GPIO_E4_IRQ EXYNOS4210_GPIO_E4_START -#define EXYNOS4210_GPIO_F0_IRQ EXYNOS4210_GPIO_F0_START -#define EXYNOS4210_GPIO_F1_IRQ EXYNOS4210_GPIO_F1_START -#define EXYNOS4210_GPIO_F2_IRQ EXYNOS4210_GPIO_F2_START -#define EXYNOS4210_GPIO_F3_IRQ EXYNOS4210_GPIO_F3_START -#define EXYNOS4210_GPIO_J0_IRQ EXYNOS4210_GPIO_J0_START -#define EXYNOS4210_GPIO_J1_IRQ EXYNOS4210_GPIO_J1_START -#define EXYNOS4210_GPIO_K0_IRQ EXYNOS4210_GPIO_K0_START -#define EXYNOS4210_GPIO_K1_IRQ EXYNOS4210_GPIO_K1_START -#define EXYNOS4210_GPIO_K2_IRQ EXYNOS4210_GPIO_K2_START -#define EXYNOS4210_GPIO_K3_IRQ EXYNOS4210_GPIO_K3_START -#define EXYNOS4210_GPIO_L0_IRQ EXYNOS4210_GPIO_L0_START -#define EXYNOS4210_GPIO_L1_IRQ EXYNOS4210_GPIO_L1_START -#define EXYNOS4210_GPIO_L2_IRQ EXYNOS4210_GPIO_L2_START -#define EXYNOS4210_GPIO_Z_IRQ EXYNOS4210_GPIO_Z_START - -#define EXYNOS4210_GPIOA_NR_PINS EXYNOS_GPIO_START(EXYNOS4210_GPIO_F3) -#define EXYNOS4210_GPIOA_NR_GINT EXYNOS_GPIO_START(EXYNOS4210_GPIO_F3) -#define EXYNOS4210_GPIOB_NR_PINS EXYNOS_GPIO_START(EXYNOS4210_GPIO_X3) -#define EXYNOS4210_GPIOB_NR_GINT EXYNOS_GPIO_START(EXYNOS4210_GPIO_L2) -#define EXYNOS4210_GPIOC_NR_PINS EXYNOS_GPIO_START(EXYNOS4210_GPIO_Z) - /* External GPIO and wakeup interrupt related definitions */ #define EXYNOS_GPIO_ECON_OFFSET 0x700 #define EXYNOS_GPIO_EMASK_OFFSET 0x900 -- cgit v0.10.2 From 724e56a48c05dacc63ceb535571eec2ad6949368 Mon Sep 17 00:00:00 2001 From: Tomasz Figa Date: Thu, 11 Oct 2012 10:11:11 +0200 Subject: pinctrl: samsung: Distinguish between pin group and bank nodes This patch modifies the loop iterating over all child nodes and parsing pin groups to check whether the node is really a pin group node by checking for existence of samsung,pins property. This is a prerequisite for further patches adding additional subnodes to the pinctrl node, required for per bank GPIO and interrupt specifiers. Signed-off-by: Tomasz Figa Reviewed-by: Kyungmin Park Acked-by: Thomas Abraham Signed-off-by: Linus Walleij diff --git a/drivers/pinctrl/pinctrl-samsung.c b/drivers/pinctrl/pinctrl-samsung.c index f219bb6..94e1378 100644 --- a/drivers/pinctrl/pinctrl-samsung.c +++ b/drivers/pinctrl/pinctrl-samsung.c @@ -609,7 +609,7 @@ static int __init samsung_pinctrl_parse_dt(struct platform_device *pdev, */ for_each_child_of_node(dev_np, cfg_np) { u32 function; - if (of_find_property(cfg_np, "interrupt-controller", NULL)) + if (!of_find_property(cfg_np, "samsung,pins", NULL)) continue; ret = samsung_pinctrl_parse_dt_pins(pdev, cfg_np, -- cgit v0.10.2 From a7a8241540c3168965588d313f46b14f79e86753 Mon Sep 17 00:00:00 2001 From: Tomasz Figa Date: Thu, 11 Oct 2012 10:11:12 +0200 Subject: ARM: dts: exynos4210-pinctrl: Add nodes for pin banks This patch is a preparation for converting the pinctrl-samsung driver to one GPIO chip and IRQ domain per bank. It allows particular banks to be specified using their phandles. Signed-off-by: Tomasz Figa Reviewed-by: Kyungmin Park Acked-by: Thomas Abraham Signed-off-by: Linus Walleij diff --git a/arch/arm/boot/dts/exynos4210-pinctrl.dtsi b/arch/arm/boot/dts/exynos4210-pinctrl.dtsi index b12cf27..f207d8d 100644 --- a/arch/arm/boot/dts/exynos4210-pinctrl.dtsi +++ b/arch/arm/boot/dts/exynos4210-pinctrl.dtsi @@ -16,6 +16,134 @@ / { pinctrl@11400000 { + gpa0: gpa0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpa1: gpa1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpb: gpb { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpc0: gpc0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpc1: gpc1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpd0: gpd0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpd1: gpd1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpe0: gpe0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpe1: gpe1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpe2: gpe2 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpe3: gpe3 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpe4: gpe4 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpf0: gpf0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpf1: gpf1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpf2: gpf2 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpf3: gpf3 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + uart0_data: uart0-data { samsung,pins = "gpa0-0", "gpa0-1"; samsung,pin-function = <0x2>; @@ -205,6 +333,145 @@ }; pinctrl@11000000 { + gpj0: gpj0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpj1: gpj1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpk0: gpk0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpk1: gpk1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpk2: gpk2 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpk3: gpk3 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpl0: gpl0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpl1: gpl1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpl2: gpl2 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpy0: gpy0 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpy1: gpy1 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpy2: gpy2 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpy3: gpy3 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpy4: gpy4 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpy5: gpy5 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpy6: gpy6 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpx0: gpx0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpx1: gpx1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpx2: gpx2 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpx3: gpx3 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + sd0_clk: sd0-clk { samsung,pins = "gpk0-0"; samsung,pin-function = <2>; @@ -438,6 +705,11 @@ }; pinctrl@03860000 { + gpz: gpz { + gpio-controller; + #gpio-cells = <2>; + }; + i2s0_bus: i2s0-bus { samsung,pins = "gpz-0", "gpz-1", "gpz-2", "gpz-3", "gpz-4", "gpz-5", "gpz-6"; diff --git a/arch/arm/boot/dts/exynos4210.dtsi b/arch/arm/boot/dts/exynos4210.dtsi index 214c557..b768e9f 100644 --- a/arch/arm/boot/dts/exynos4210.dtsi +++ b/arch/arm/boot/dts/exynos4210.dtsi @@ -74,233 +74,4 @@ compatible = "samsung,pinctrl-exynos4210"; reg = <0x03860000 0x1000>; }; - - gpio-controllers { - #address-cells = <1>; - #size-cells = <1>; - gpio-controller; - ranges; - - gpa0: gpio-controller@11400000 { - compatible = "samsung,exynos4-gpio"; - reg = <0x11400000 0x20>; - #gpio-cells = <4>; - }; - - gpa1: gpio-controller@11400020 { - compatible = "samsung,exynos4-gpio"; - reg = <0x11400020 0x20>; - #gpio-cells = <4>; - }; - - gpb: gpio-controller@11400040 { - compatible = "samsung,exynos4-gpio"; - reg = <0x11400040 0x20>; - #gpio-cells = <4>; - }; - - gpc0: gpio-controller@11400060 { - compatible = "samsung,exynos4-gpio"; - reg = <0x11400060 0x20>; - #gpio-cells = <4>; - }; - - gpc1: gpio-controller@11400080 { - compatible = "samsung,exynos4-gpio"; - reg = <0x11400080 0x20>; - #gpio-cells = <4>; - }; - - gpd0: gpio-controller@114000A0 { - compatible = "samsung,exynos4-gpio"; - reg = <0x114000A0 0x20>; - #gpio-cells = <4>; - }; - - gpd1: gpio-controller@114000C0 { - compatible = "samsung,exynos4-gpio"; - reg = <0x114000C0 0x20>; - #gpio-cells = <4>; - }; - - gpe0: gpio-controller@114000E0 { - compatible = "samsung,exynos4-gpio"; - reg = <0x114000E0 0x20>; - #gpio-cells = <4>; - }; - - gpe1: gpio-controller@11400100 { - compatible = "samsung,exynos4-gpio"; - reg = <0x11400100 0x20>; - #gpio-cells = <4>; - }; - - gpe2: gpio-controller@11400120 { - compatible = "samsung,exynos4-gpio"; - reg = <0x11400120 0x20>; - #gpio-cells = <4>; - }; - - gpe3: gpio-controller@11400140 { - compatible = "samsung,exynos4-gpio"; - reg = <0x11400140 0x20>; - #gpio-cells = <4>; - }; - - gpe4: gpio-controller@11400160 { - compatible = "samsung,exynos4-gpio"; - reg = <0x11400160 0x20>; - #gpio-cells = <4>; - }; - - gpf0: gpio-controller@11400180 { - compatible = "samsung,exynos4-gpio"; - reg = <0x11400180 0x20>; - #gpio-cells = <4>; - }; - - gpf1: gpio-controller@114001A0 { - compatible = "samsung,exynos4-gpio"; - reg = <0x114001A0 0x20>; - #gpio-cells = <4>; - }; - - gpf2: gpio-controller@114001C0 { - compatible = "samsung,exynos4-gpio"; - reg = <0x114001C0 0x20>; - #gpio-cells = <4>; - }; - - gpf3: gpio-controller@114001E0 { - compatible = "samsung,exynos4-gpio"; - reg = <0x114001E0 0x20>; - #gpio-cells = <4>; - }; - - gpj0: gpio-controller@11000000 { - compatible = "samsung,exynos4-gpio"; - reg = <0x11000000 0x20>; - #gpio-cells = <4>; - }; - - gpj1: gpio-controller@11000020 { - compatible = "samsung,exynos4-gpio"; - reg = <0x11000020 0x20>; - #gpio-cells = <4>; - }; - - gpk0: gpio-controller@11000040 { - compatible = "samsung,exynos4-gpio"; - reg = <0x11000040 0x20>; - #gpio-cells = <4>; - }; - - gpk1: gpio-controller@11000060 { - compatible = "samsung,exynos4-gpio"; - reg = <0x11000060 0x20>; - #gpio-cells = <4>; - }; - - gpk2: gpio-controller@11000080 { - compatible = "samsung,exynos4-gpio"; - reg = <0x11000080 0x20>; - #gpio-cells = <4>; - }; - - gpk3: gpio-controller@110000A0 { - compatible = "samsung,exynos4-gpio"; - reg = <0x110000A0 0x20>; - #gpio-cells = <4>; - }; - - gpl0: gpio-controller@110000C0 { - compatible = "samsung,exynos4-gpio"; - reg = <0x110000C0 0x20>; - #gpio-cells = <4>; - }; - - gpl1: gpio-controller@110000E0 { - compatible = "samsung,exynos4-gpio"; - reg = <0x110000E0 0x20>; - #gpio-cells = <4>; - }; - - gpl2: gpio-controller@11000100 { - compatible = "samsung,exynos4-gpio"; - reg = <0x11000100 0x20>; - #gpio-cells = <4>; - }; - - gpy0: gpio-controller@11000120 { - compatible = "samsung,exynos4-gpio"; - reg = <0x11000120 0x20>; - #gpio-cells = <4>; - }; - - gpy1: gpio-controller@11000140 { - compatible = "samsung,exynos4-gpio"; - reg = <0x11000140 0x20>; - #gpio-cells = <4>; - }; - - gpy2: gpio-controller@11000160 { - compatible = "samsung,exynos4-gpio"; - reg = <0x11000160 0x20>; - #gpio-cells = <4>; - }; - - gpy3: gpio-controller@11000180 { - compatible = "samsung,exynos4-gpio"; - reg = <0x11000180 0x20>; - #gpio-cells = <4>; - }; - - gpy4: gpio-controller@110001A0 { - compatible = "samsung,exynos4-gpio"; - reg = <0x110001A0 0x20>; - #gpio-cells = <4>; - }; - - gpy5: gpio-controller@110001C0 { - compatible = "samsung,exynos4-gpio"; - reg = <0x110001C0 0x20>; - #gpio-cells = <4>; - }; - - gpy6: gpio-controller@110001E0 { - compatible = "samsung,exynos4-gpio"; - reg = <0x110001E0 0x20>; - #gpio-cells = <4>; - }; - - gpx0: gpio-controller@11000C00 { - compatible = "samsung,exynos4-gpio"; - reg = <0x11000C00 0x20>; - #gpio-cells = <4>; - }; - - gpx1: gpio-controller@11000C20 { - compatible = "samsung,exynos4-gpio"; - reg = <0x11000C20 0x20>; - #gpio-cells = <4>; - }; - - gpx2: gpio-controller@11000C40 { - compatible = "samsung,exynos4-gpio"; - reg = <0x11000C40 0x20>; - #gpio-cells = <4>; - }; - - gpx3: gpio-controller@11000C60 { - compatible = "samsung,exynos4-gpio"; - reg = <0x11000C60 0x20>; - #gpio-cells = <4>; - }; - - gpz: gpio-controller@03860000 { - compatible = "samsung,exynos4-gpio"; - reg = <0x03860000 0x20>; - #gpio-cells = <4>; - }; - }; }; -- cgit v0.10.2 From ab663789d69760d2735402f66501f20b60312a3d Mon Sep 17 00:00:00 2001 From: Tomasz Figa Date: Thu, 11 Oct 2012 10:11:13 +0200 Subject: pinctrl: samsung: Match pin banks with their device nodes This patch is a preparation for converting the pinctrl-samsung driver to one GPIO chip and IRQ domain per bank. It binds banks defined by internal driver data with bank nodes in device tree. Signed-off-by: Tomasz Figa Reviewed-by: Kyungmin Park Acked-by: Thomas Abraham Signed-off-by: Linus Walleij diff --git a/drivers/pinctrl/pinctrl-samsung.c b/drivers/pinctrl/pinctrl-samsung.c index 94e1378..f266710 100644 --- a/drivers/pinctrl/pinctrl-samsung.c +++ b/drivers/pinctrl/pinctrl-samsung.c @@ -794,6 +794,7 @@ static struct samsung_pin_ctrl *samsung_pinctrl_get_soc_data( int id; const struct of_device_id *match; const struct device_node *node = pdev->dev.of_node; + struct device_node *np; struct samsung_pin_ctrl *ctrl; struct samsung_pin_bank *bank; int i; @@ -816,6 +817,18 @@ static struct samsung_pin_ctrl *samsung_pinctrl_get_soc_data( } } + for_each_child_of_node(node, np) { + if (!of_find_property(np, "gpio-controller", NULL)) + continue; + bank = ctrl->pin_banks; + for (i = 0; i < ctrl->nr_banks; ++i, ++bank) { + if (!strcmp(bank->name, np->name)) { + bank->of_node = np; + break; + } + } + } + ctrl->base = pin_base; pin_base += ctrl->nr_pins; diff --git a/drivers/pinctrl/pinctrl-samsung.h b/drivers/pinctrl/pinctrl-samsung.h index b895693..5c53f32 100644 --- a/drivers/pinctrl/pinctrl-samsung.h +++ b/drivers/pinctrl/pinctrl-samsung.h @@ -111,6 +111,7 @@ struct samsung_pinctrl_drv_data; * @eint_type: type of the external interrupt supported by the bank. * @irq_base: starting controller local irq number of the bank. * @name: name to be prefixed for each pin in this pin bank. + * @of_node: OF node of the bank. */ struct samsung_pin_bank { u32 pctl_offset; @@ -124,6 +125,7 @@ struct samsung_pin_bank { enum eint_type eint_type; u32 irq_base; char *name; + struct device_node *of_node; }; /** -- cgit v0.10.2 From 6defe9a0ddc59aa2302473aa3c8b3fdb543fdc1b Mon Sep 17 00:00:00 2001 From: Tomasz Figa Date: Thu, 11 Oct 2012 10:11:14 +0200 Subject: pinctrl: samsung: Hold pointer to driver data in bank struct This patch is a preparation for converting the pinctrl-samsung driver to one GPIO chip and IRQ domain per bank. It allows one having only a pointer to particular bank struct to access driver data struct. Signed-off-by: Tomasz Figa Reviewed-by: Kyungmin Park Acked-by: Thomas Abraham Signed-off-by: Linus Walleij diff --git a/drivers/pinctrl/pinctrl-samsung.c b/drivers/pinctrl/pinctrl-samsung.c index f266710..53493c3 100644 --- a/drivers/pinctrl/pinctrl-samsung.c +++ b/drivers/pinctrl/pinctrl-samsung.c @@ -789,17 +789,18 @@ static const struct of_device_id samsung_pinctrl_dt_match[]; /* retrieve the soc specific data */ static struct samsung_pin_ctrl *samsung_pinctrl_get_soc_data( + struct samsung_pinctrl_drv_data *d, struct platform_device *pdev) { int id; const struct of_device_id *match; - const struct device_node *node = pdev->dev.of_node; + struct device_node *node = pdev->dev.of_node; struct device_node *np; struct samsung_pin_ctrl *ctrl; struct samsung_pin_bank *bank; int i; - id = of_alias_get_id(pdev->dev.of_node, "pinctrl"); + id = of_alias_get_id(node, "pinctrl"); if (id < 0) { dev_err(&pdev->dev, "failed to get alias id\n"); return NULL; @@ -809,6 +810,7 @@ static struct samsung_pin_ctrl *samsung_pinctrl_get_soc_data( bank = ctrl->pin_banks; for (i = 0; i < ctrl->nr_banks; ++i, ++bank) { + bank->drvdata = d; bank->pin_base = ctrl->nr_pins; ctrl->nr_pins += bank->nr_pins; if (bank->eint_type == EINT_TYPE_GPIO) { @@ -848,18 +850,18 @@ static int __devinit samsung_pinctrl_probe(struct platform_device *pdev) return -ENODEV; } - ctrl = samsung_pinctrl_get_soc_data(pdev); - if (!ctrl) { - dev_err(&pdev->dev, "driver data not available\n"); - return -EINVAL; - } - drvdata = devm_kzalloc(dev, sizeof(*drvdata), GFP_KERNEL); if (!drvdata) { dev_err(dev, "failed to allocate memory for driver's " "private data\n"); return -ENOMEM; } + + ctrl = samsung_pinctrl_get_soc_data(drvdata, pdev); + if (!ctrl) { + dev_err(&pdev->dev, "driver data not available\n"); + return -EINVAL; + } drvdata->ctrl = ctrl; drvdata->dev = dev; diff --git a/drivers/pinctrl/pinctrl-samsung.h b/drivers/pinctrl/pinctrl-samsung.h index 5c53f32..ea5dadd 100644 --- a/drivers/pinctrl/pinctrl-samsung.h +++ b/drivers/pinctrl/pinctrl-samsung.h @@ -112,6 +112,7 @@ struct samsung_pinctrl_drv_data; * @irq_base: starting controller local irq number of the bank. * @name: name to be prefixed for each pin in this pin bank. * @of_node: OF node of the bank. + * @drvdata: link to controller driver data */ struct samsung_pin_bank { u32 pctl_offset; @@ -126,6 +127,7 @@ struct samsung_pin_bank { u32 irq_base; char *name; struct device_node *of_node; + struct samsung_pinctrl_drv_data *drvdata; }; /** -- cgit v0.10.2 From 1b6056d6db2426cd612f03dabacf655ecb6a27ae Mon Sep 17 00:00:00 2001 From: Tomasz Figa Date: Thu, 11 Oct 2012 10:11:15 +0200 Subject: pinctrl: samsung: Include bank-specific eint offset in bank struct Some SoCs, like Exynos4x12, have non-sequential layout of EINT control registers and so current way of calculating register addresses does not work correctly for them. This patch adds eint_offset field to samsung_pin_bank struct and modifies the driver to use it instead of calculating the offsets from bank index. Signed-off-by: Tomasz Figa Reviewed-by: Kyungmin Park Acked-by: Thomas Abraham Signed-off-by: Linus Walleij diff --git a/drivers/pinctrl/pinctrl-exynos.c b/drivers/pinctrl/pinctrl-exynos.c index 0ea2164..bd9f130 100644 --- a/drivers/pinctrl/pinctrl-exynos.c +++ b/drivers/pinctrl/pinctrl-exynos.c @@ -146,7 +146,7 @@ static struct exynos_geint_data *exynos_get_eint_data(irq_hw_number_t hw, struct samsung_pin_bank *bank = d->ctrl->pin_banks; struct exynos_geint_data *eint_data; unsigned int nr_banks = d->ctrl->nr_banks, idx; - unsigned int irq_base = 0, eint_offset = 0; + unsigned int irq_base = 0; if (hw >= d->ctrl->nr_gint) { dev_err(d->dev, "unsupported ext-gpio interrupt\n"); @@ -159,7 +159,6 @@ static struct exynos_geint_data *exynos_get_eint_data(irq_hw_number_t hw, if ((hw >= irq_base) && (hw < (irq_base + bank->nr_pins))) break; irq_base += bank->nr_pins; - eint_offset += 4; } if (idx == nr_banks) { @@ -175,7 +174,7 @@ static struct exynos_geint_data *exynos_get_eint_data(irq_hw_number_t hw, eint_data->bank = bank; eint_data->pin = hw - irq_base; - eint_data->eint_offset = eint_offset; + eint_data->eint_offset = bank->eint_offset; return eint_data; } @@ -484,35 +483,35 @@ static int exynos_eint_wkup_init(struct samsung_pinctrl_drv_data *d) /* pin banks of exynos4210 pin-controller 0 */ static struct samsung_pin_bank exynos4210_pin_banks0[] = { - EXYNOS_PIN_BANK_EINTG(8, 0x000, "gpa0"), - EXYNOS_PIN_BANK_EINTG(6, 0x020, "gpa1"), - EXYNOS_PIN_BANK_EINTG(8, 0x040, "gpb"), - EXYNOS_PIN_BANK_EINTG(5, 0x060, "gpc0"), - EXYNOS_PIN_BANK_EINTG(5, 0x080, "gpc1"), - EXYNOS_PIN_BANK_EINTG(4, 0x0A0, "gpd0"), - EXYNOS_PIN_BANK_EINTG(4, 0x0C0, "gpd1"), - EXYNOS_PIN_BANK_EINTG(5, 0x0E0, "gpe0"), - EXYNOS_PIN_BANK_EINTG(8, 0x100, "gpe1"), - EXYNOS_PIN_BANK_EINTG(6, 0x120, "gpe2"), - EXYNOS_PIN_BANK_EINTG(8, 0x140, "gpe3"), - EXYNOS_PIN_BANK_EINTG(8, 0x160, "gpe4"), - EXYNOS_PIN_BANK_EINTG(8, 0x180, "gpf0"), - EXYNOS_PIN_BANK_EINTG(8, 0x1A0, "gpf1"), - EXYNOS_PIN_BANK_EINTG(8, 0x1C0, "gpf2"), - EXYNOS_PIN_BANK_EINTG(6, 0x1E0, "gpf3"), + EXYNOS_PIN_BANK_EINTG(8, 0x000, "gpa0", 0x00), + EXYNOS_PIN_BANK_EINTG(6, 0x020, "gpa1", 0x04), + EXYNOS_PIN_BANK_EINTG(8, 0x040, "gpb", 0x08), + EXYNOS_PIN_BANK_EINTG(5, 0x060, "gpc0", 0x0c), + EXYNOS_PIN_BANK_EINTG(5, 0x080, "gpc1", 0x10), + EXYNOS_PIN_BANK_EINTG(4, 0x0A0, "gpd0", 0x14), + EXYNOS_PIN_BANK_EINTG(4, 0x0C0, "gpd1", 0x18), + EXYNOS_PIN_BANK_EINTG(5, 0x0E0, "gpe0", 0x1c), + EXYNOS_PIN_BANK_EINTG(8, 0x100, "gpe1", 0x20), + EXYNOS_PIN_BANK_EINTG(6, 0x120, "gpe2", 0x24), + EXYNOS_PIN_BANK_EINTG(8, 0x140, "gpe3", 0x28), + EXYNOS_PIN_BANK_EINTG(8, 0x160, "gpe4", 0x2c), + EXYNOS_PIN_BANK_EINTG(8, 0x180, "gpf0", 0x30), + EXYNOS_PIN_BANK_EINTG(8, 0x1A0, "gpf1", 0x34), + EXYNOS_PIN_BANK_EINTG(8, 0x1C0, "gpf2", 0x38), + EXYNOS_PIN_BANK_EINTG(6, 0x1E0, "gpf3", 0x3c), }; /* pin banks of exynos4210 pin-controller 1 */ static struct samsung_pin_bank exynos4210_pin_banks1[] = { - EXYNOS_PIN_BANK_EINTG(8, 0x000, "gpj0"), - EXYNOS_PIN_BANK_EINTG(5, 0x020, "gpj1"), - EXYNOS_PIN_BANK_EINTG(7, 0x040, "gpk0"), - EXYNOS_PIN_BANK_EINTG(7, 0x060, "gpk1"), - EXYNOS_PIN_BANK_EINTG(7, 0x080, "gpk2"), - EXYNOS_PIN_BANK_EINTG(7, 0x0A0, "gpk3"), - EXYNOS_PIN_BANK_EINTG(8, 0x0C0, "gpl0"), - EXYNOS_PIN_BANK_EINTG(3, 0x0E0, "gpl1"), - EXYNOS_PIN_BANK_EINTG(8, 0x100, "gpl2"), + EXYNOS_PIN_BANK_EINTG(8, 0x000, "gpj0", 0x00), + EXYNOS_PIN_BANK_EINTG(5, 0x020, "gpj1", 0x04), + EXYNOS_PIN_BANK_EINTG(7, 0x040, "gpk0", 0x08), + EXYNOS_PIN_BANK_EINTG(7, 0x060, "gpk1", 0x0c), + EXYNOS_PIN_BANK_EINTG(7, 0x080, "gpk2", 0x10), + EXYNOS_PIN_BANK_EINTG(7, 0x0A0, "gpk3", 0x14), + EXYNOS_PIN_BANK_EINTG(8, 0x0C0, "gpl0", 0x18), + EXYNOS_PIN_BANK_EINTG(3, 0x0E0, "gpl1", 0x1c), + EXYNOS_PIN_BANK_EINTG(8, 0x100, "gpl2", 0x20), EXYNOS_PIN_BANK_EINTN(6, 0x120, "gpy0"), EXYNOS_PIN_BANK_EINTN(4, 0x140, "gpy1"), EXYNOS_PIN_BANK_EINTN(6, 0x160, "gpy2"), diff --git a/drivers/pinctrl/pinctrl-exynos.h b/drivers/pinctrl/pinctrl-exynos.h index 2de4a29..5d8e380 100644 --- a/drivers/pinctrl/pinctrl-exynos.h +++ b/drivers/pinctrl/pinctrl-exynos.h @@ -59,7 +59,7 @@ .name = id \ } -#define EXYNOS_PIN_BANK_EINTG(pins, reg, id) \ +#define EXYNOS_PIN_BANK_EINTG(pins, reg, id, offs) \ { \ .pctl_offset = reg, \ .nr_pins = pins, \ @@ -69,6 +69,7 @@ .conpdn_width = 2, \ .pudpdn_width = 2, \ .eint_type = EINT_TYPE_GPIO, \ + .eint_offset = offs, \ .name = id \ } diff --git a/drivers/pinctrl/pinctrl-samsung.h b/drivers/pinctrl/pinctrl-samsung.h index ea5dadd..d77d9bc 100644 --- a/drivers/pinctrl/pinctrl-samsung.h +++ b/drivers/pinctrl/pinctrl-samsung.h @@ -124,6 +124,7 @@ struct samsung_pin_bank { u8 conpdn_width; u8 pudpdn_width; enum eint_type eint_type; + u32 eint_offset; u32 irq_base; char *name; struct device_node *of_node; -- cgit v0.10.2 From 595be7268a85735d229451821b56f122d09d7bdc Mon Sep 17 00:00:00 2001 From: Tomasz Figa Date: Thu, 11 Oct 2012 10:11:16 +0200 Subject: pinctrl: exynos: Use one IRQ domain per pin bank Instead of registering one IRQ domain for all pin banks of a pin controller, this patch implements registration of per-bank domains. At a cost of a little memory overhead (~2.5KiB for all GPIO interrupts of Exynos4x12) it simplifies driver code and device tree sources, because GPIO interrupts can be now specified per banks. Example: device { /* ... */ interrupt-parent = <&gpa1>; interrupts = <3 0>; /* ... */ }; Signed-off-by: Tomasz Figa Reviewed-by: Kyungmin Park Acked-by: Thomas Abraham Signed-off-by: Linus Walleij diff --git a/arch/arm/boot/dts/exynos4210.dtsi b/arch/arm/boot/dts/exynos4210.dtsi index b768e9f..c27aea7 100644 --- a/arch/arm/boot/dts/exynos4210.dtsi +++ b/arch/arm/boot/dts/exynos4210.dtsi @@ -46,16 +46,12 @@ compatible = "samsung,pinctrl-exynos4210"; reg = <0x11400000 0x1000>; interrupts = <0 47 0>; - interrupt-controller; - #interrupt-cells = <2>; }; pinctrl_1: pinctrl@11000000 { compatible = "samsung,pinctrl-exynos4210"; reg = <0x11000000 0x1000>; interrupts = <0 46 0>; - interrupt-controller; - #interrupt-cells = <2>; wakup_eint: wakeup-interrupt-controller { compatible = "samsung,exynos4210-wakeup-eint"; diff --git a/drivers/pinctrl/pinctrl-exynos.c b/drivers/pinctrl/pinctrl-exynos.c index bd9f130..be757b1 100644 --- a/drivers/pinctrl/pinctrl-exynos.c +++ b/drivers/pinctrl/pinctrl-exynos.c @@ -40,46 +40,46 @@ static const struct of_device_id exynos_wkup_irq_ids[] = { static void exynos_gpio_irq_unmask(struct irq_data *irqd) { - struct samsung_pinctrl_drv_data *d = irqd->domain->host_data; - struct exynos_geint_data *edata = irq_data_get_irq_handler_data(irqd); - unsigned long reg_mask = d->ctrl->geint_mask + edata->eint_offset; + struct samsung_pin_bank *bank = irq_data_get_irq_chip_data(irqd); + struct samsung_pinctrl_drv_data *d = bank->drvdata; + unsigned long reg_mask = d->ctrl->geint_mask + bank->eint_offset; unsigned long mask; mask = readl(d->virt_base + reg_mask); - mask &= ~(1 << edata->pin); + mask &= ~(1 << irqd->hwirq); writel(mask, d->virt_base + reg_mask); } static void exynos_gpio_irq_mask(struct irq_data *irqd) { - struct samsung_pinctrl_drv_data *d = irqd->domain->host_data; - struct exynos_geint_data *edata = irq_data_get_irq_handler_data(irqd); - unsigned long reg_mask = d->ctrl->geint_mask + edata->eint_offset; + struct samsung_pin_bank *bank = irq_data_get_irq_chip_data(irqd); + struct samsung_pinctrl_drv_data *d = bank->drvdata; + unsigned long reg_mask = d->ctrl->geint_mask + bank->eint_offset; unsigned long mask; mask = readl(d->virt_base + reg_mask); - mask |= 1 << edata->pin; + mask |= 1 << irqd->hwirq; writel(mask, d->virt_base + reg_mask); } static void exynos_gpio_irq_ack(struct irq_data *irqd) { - struct samsung_pinctrl_drv_data *d = irqd->domain->host_data; - struct exynos_geint_data *edata = irq_data_get_irq_handler_data(irqd); - unsigned long reg_pend = d->ctrl->geint_pend + edata->eint_offset; + struct samsung_pin_bank *bank = irq_data_get_irq_chip_data(irqd); + struct samsung_pinctrl_drv_data *d = bank->drvdata; + unsigned long reg_pend = d->ctrl->geint_pend + bank->eint_offset; - writel(1 << edata->pin, d->virt_base + reg_pend); + writel(1 << irqd->hwirq, d->virt_base + reg_pend); } static int exynos_gpio_irq_set_type(struct irq_data *irqd, unsigned int type) { - struct samsung_pinctrl_drv_data *d = irqd->domain->host_data; + struct samsung_pin_bank *bank = irq_data_get_irq_chip_data(irqd); + struct samsung_pinctrl_drv_data *d = bank->drvdata; struct samsung_pin_ctrl *ctrl = d->ctrl; - struct exynos_geint_data *edata = irq_data_get_irq_handler_data(irqd); - struct samsung_pin_bank *bank = edata->bank; - unsigned int shift = EXYNOS_EINT_CON_LEN * edata->pin; + unsigned int pin = irqd->hwirq; + unsigned int shift = EXYNOS_EINT_CON_LEN * pin; unsigned int con, trig_type; - unsigned long reg_con = ctrl->geint_con + edata->eint_offset; + unsigned long reg_con = ctrl->geint_con + bank->eint_offset; unsigned int mask; switch (type) { @@ -114,7 +114,7 @@ static int exynos_gpio_irq_set_type(struct irq_data *irqd, unsigned int type) writel(con, d->virt_base + reg_con); reg_con = bank->pctl_offset; - shift = edata->pin * bank->func_width; + shift = pin * bank->func_width; mask = (1 << bank->func_width) - 1; con = readl(d->virt_base + reg_con); @@ -136,81 +136,23 @@ static struct irq_chip exynos_gpio_irq_chip = { .irq_set_type = exynos_gpio_irq_set_type, }; -/* - * given a controller-local external gpio interrupt number, prepare the handler - * data for it. - */ -static struct exynos_geint_data *exynos_get_eint_data(irq_hw_number_t hw, - struct samsung_pinctrl_drv_data *d) -{ - struct samsung_pin_bank *bank = d->ctrl->pin_banks; - struct exynos_geint_data *eint_data; - unsigned int nr_banks = d->ctrl->nr_banks, idx; - unsigned int irq_base = 0; - - if (hw >= d->ctrl->nr_gint) { - dev_err(d->dev, "unsupported ext-gpio interrupt\n"); - return NULL; - } - - for (idx = 0; idx < nr_banks; idx++, bank++) { - if (bank->eint_type != EINT_TYPE_GPIO) - continue; - if ((hw >= irq_base) && (hw < (irq_base + bank->nr_pins))) - break; - irq_base += bank->nr_pins; - } - - if (idx == nr_banks) { - dev_err(d->dev, "pin bank not found for ext-gpio interrupt\n"); - return NULL; - } - - eint_data = devm_kzalloc(d->dev, sizeof(*eint_data), GFP_KERNEL); - if (!eint_data) { - dev_err(d->dev, "no memory for eint-gpio data\n"); - return NULL; - } - - eint_data->bank = bank; - eint_data->pin = hw - irq_base; - eint_data->eint_offset = bank->eint_offset; - return eint_data; -} - static int exynos_gpio_irq_map(struct irq_domain *h, unsigned int virq, irq_hw_number_t hw) { - struct samsung_pinctrl_drv_data *d = h->host_data; - struct exynos_geint_data *eint_data; - - eint_data = exynos_get_eint_data(hw, d); - if (!eint_data) - return -EINVAL; + struct samsung_pin_bank *b = h->host_data; - irq_set_handler_data(virq, eint_data); - irq_set_chip_data(virq, h->host_data); + irq_set_chip_data(virq, b); irq_set_chip_and_handler(virq, &exynos_gpio_irq_chip, handle_level_irq); set_irq_flags(virq, IRQF_VALID); return 0; } -static void exynos_gpio_irq_unmap(struct irq_domain *h, unsigned int virq) -{ - struct samsung_pinctrl_drv_data *d = h->host_data; - struct exynos_geint_data *eint_data; - - eint_data = irq_get_handler_data(virq); - devm_kfree(d->dev, eint_data); -} - /* * irq domain callbacks for external gpio interrupt controller. */ static const struct irq_domain_ops exynos_gpio_irqd_ops = { .map = exynos_gpio_irq_map, - .unmap = exynos_gpio_irq_unmap, .xlate = irq_domain_xlate_twocell, }; @@ -229,7 +171,7 @@ static irqreturn_t exynos_eint_gpio_irq(int irq, void *data) return IRQ_HANDLED; bank += (group - 1); - virq = irq_linear_revmap(d->gpio_irqd, bank->irq_base + pin); + virq = irq_linear_revmap(bank->irq_domain, pin); if (!virq) return IRQ_NONE; generic_handle_irq(virq); @@ -242,8 +184,10 @@ static irqreturn_t exynos_eint_gpio_irq(int irq, void *data) */ static int exynos_eint_gpio_init(struct samsung_pinctrl_drv_data *d) { + struct samsung_pin_bank *bank; struct device *dev = d->dev; unsigned int ret; + unsigned int i; if (!d->irq) { dev_err(dev, "irq number not available\n"); @@ -257,11 +201,16 @@ static int exynos_eint_gpio_init(struct samsung_pinctrl_drv_data *d) return -ENXIO; } - d->gpio_irqd = irq_domain_add_linear(dev->of_node, d->ctrl->nr_gint, - &exynos_gpio_irqd_ops, d); - if (!d->gpio_irqd) { - dev_err(dev, "gpio irq domain allocation failed\n"); - return -ENXIO; + bank = d->ctrl->pin_banks; + for (i = 0; i < d->ctrl->nr_banks; ++i, ++bank) { + if (bank->eint_type != EINT_TYPE_GPIO) + continue; + bank->irq_domain = irq_domain_add_linear(bank->of_node, + bank->nr_pins, &exynos_gpio_irqd_ops, bank); + if (!bank->irq_domain) { + dev_err(dev, "gpio irq domain add failed\n"); + return -ENXIO; + } } return 0; diff --git a/drivers/pinctrl/pinctrl-exynos.h b/drivers/pinctrl/pinctrl-exynos.h index 5d8e380..f05efa0 100644 --- a/drivers/pinctrl/pinctrl-exynos.h +++ b/drivers/pinctrl/pinctrl-exynos.h @@ -74,18 +74,6 @@ } /** - * struct exynos_geint_data: gpio eint specific data for irq_chip callbacks. - * @bank: pin bank from which this gpio interrupt originates. - * @pin: pin number within the bank. - * @eint_offset: offset to be added to the con/pend/mask register bank base. - */ -struct exynos_geint_data { - struct samsung_pin_bank *bank; - u32 pin; - u32 eint_offset; -}; - -/** * struct exynos_weint_data: irq specific data for all the wakeup interrupts * generated by the external wakeup interrupt controller. * @domain: irq domain representing the external wakeup interrupts diff --git a/drivers/pinctrl/pinctrl-samsung.c b/drivers/pinctrl/pinctrl-samsung.c index 53493c3..e1ef5d2 100644 --- a/drivers/pinctrl/pinctrl-samsung.c +++ b/drivers/pinctrl/pinctrl-samsung.c @@ -813,10 +813,6 @@ static struct samsung_pin_ctrl *samsung_pinctrl_get_soc_data( bank->drvdata = d; bank->pin_base = ctrl->nr_pins; ctrl->nr_pins += bank->nr_pins; - if (bank->eint_type == EINT_TYPE_GPIO) { - bank->irq_base = ctrl->nr_gint; - ctrl->nr_gint += bank->nr_pins; - } } for_each_child_of_node(node, np) { diff --git a/drivers/pinctrl/pinctrl-samsung.h b/drivers/pinctrl/pinctrl-samsung.h index d77d9bc..e56be223 100644 --- a/drivers/pinctrl/pinctrl-samsung.h +++ b/drivers/pinctrl/pinctrl-samsung.h @@ -109,10 +109,10 @@ struct samsung_pinctrl_drv_data; * @conpdn_width: width of the sleep mode function selector bin field. * @pudpdn_width: width of the sleep mode pull up/down selector bit field. * @eint_type: type of the external interrupt supported by the bank. - * @irq_base: starting controller local irq number of the bank. * @name: name to be prefixed for each pin in this pin bank. * @of_node: OF node of the bank. * @drvdata: link to controller driver data + * @irq_domain: IRQ domain of the bank. */ struct samsung_pin_bank { u32 pctl_offset; @@ -125,10 +125,10 @@ struct samsung_pin_bank { u8 pudpdn_width; enum eint_type eint_type; u32 eint_offset; - u32 irq_base; char *name; struct device_node *of_node; struct samsung_pinctrl_drv_data *drvdata; + struct irq_domain *irq_domain; }; /** @@ -137,7 +137,6 @@ struct samsung_pin_bank { * @nr_banks: number of pin banks. * @base: starting system wide pin number. * @nr_pins: number of pins supported by the controller. - * @nr_gint: number of external gpio interrupts supported. * @nr_wint: number of external wakeup interrupts supported. * @geint_con: offset of the ext-gpio controller registers. * @geint_mask: offset of the ext-gpio interrupt mask registers. @@ -158,7 +157,6 @@ struct samsung_pin_ctrl { u32 base; u32 nr_pins; - u32 nr_gint; u32 nr_wint; u32 geint_con; @@ -205,7 +203,6 @@ struct samsung_pinctrl_drv_data { const struct samsung_pmx_func *pmx_functions; unsigned int nr_functions; - struct irq_domain *gpio_irqd; struct irq_domain *wkup_irqd; struct gpio_chip *gc; -- cgit v0.10.2 From d3a7b9e3a168df881a0ae3bd0d582f44a5d5aca3 Mon Sep 17 00:00:00 2001 From: Tomasz Figa Date: Thu, 11 Oct 2012 10:11:17 +0200 Subject: pinctrl: samsung: Use one GPIO chip per pin bank This patch modifies the pinctrl-samsung driver to register one GPIO chip per pin bank, instead of a single chip for all pin banks of the controller. It simplifies GPIO accesses a lot (constant time instead of looping through the list of banks to find the right one) and should have a good effect on performance of any bit-banging driver. In addition it allows to reference GPIO pins by a phandle to the bank node and a local pin offset inside of the bank (similar to previous gpiolib driver), which is more clear and readable than using indices relative to the whole pin controller. Example: device { /* ... */ gpios = <&gpk0 4 0>; /* ... */ }; Signed-off-by: Tomasz Figa Reviewed-by: Kyungmin Park Acked-by: Thomas Abraham Signed-off-by: Linus Walleij diff --git a/drivers/pinctrl/pinctrl-samsung.c b/drivers/pinctrl/pinctrl-samsung.c index e1ef5d2..0a38368 100644 --- a/drivers/pinctrl/pinctrl-samsung.c +++ b/drivers/pinctrl/pinctrl-samsung.c @@ -48,6 +48,11 @@ struct pin_config { static unsigned int pin_base = 0; +static inline struct samsung_pin_bank *gc_to_pin_bank(struct gpio_chip *gc) +{ + return container_of(gc, struct samsung_pin_bank, gpio_chip); +} + /* check if the selector is a valid pin group selector */ static int samsung_get_group_count(struct pinctrl_dev *pctldev) { @@ -333,9 +338,12 @@ static int samsung_pinmux_gpio_set_direction(struct pinctrl_dev *pctldev, void __iomem *reg; u32 data, pin_offset, mask, shift; + bank = gc_to_pin_bank(range->gc); drvdata = pinctrl_dev_get_drvdata(pctldev); - pin_to_reg_bank(drvdata, offset, ®, &pin_offset, &bank); + pin_offset = offset - bank->pin_base; + reg = drvdata->virt_base + bank->pctl_offset; + mask = (1 << bank->func_width) - 1; shift = pin_offset * bank->func_width; @@ -469,17 +477,16 @@ static struct pinconf_ops samsung_pinconf_ops = { /* gpiolib gpio_set callback function */ static void samsung_gpio_set(struct gpio_chip *gc, unsigned offset, int value) { + struct samsung_pin_bank *bank = gc_to_pin_bank(gc); void __iomem *reg; - u32 pin_offset, data; - struct samsung_pinctrl_drv_data *drvdata; + u32 data; - drvdata = dev_get_drvdata(gc->dev); + reg = bank->drvdata->virt_base + bank->pctl_offset; - pin_to_reg_bank(drvdata, offset, ®, &pin_offset, NULL); data = readl(reg + DAT_REG); - data &= ~(1 << pin_offset); + data &= ~(1 << offset); if (value) - data |= 1 << pin_offset; + data |= 1 << offset; writel(data, reg + DAT_REG); } @@ -487,14 +494,13 @@ static void samsung_gpio_set(struct gpio_chip *gc, unsigned offset, int value) static int samsung_gpio_get(struct gpio_chip *gc, unsigned offset) { void __iomem *reg; - u32 pin_offset, data; - struct samsung_pinctrl_drv_data *drvdata; + u32 data; + struct samsung_pin_bank *bank = gc_to_pin_bank(gc); - drvdata = dev_get_drvdata(gc->dev); + reg = bank->drvdata->virt_base + bank->pctl_offset; - pin_to_reg_bank(drvdata, offset, ®, &pin_offset, NULL); data = readl(reg + DAT_REG); - data >>= pin_offset; + data >>= offset; data &= 1; return data; } @@ -724,12 +730,16 @@ static int __init samsung_pinctrl_register(struct platform_device *pdev, return -EINVAL; } - drvdata->grange.name = "samsung-pctrl-gpio-range"; - drvdata->grange.id = 0; - drvdata->grange.base = drvdata->ctrl->base; - drvdata->grange.npins = drvdata->ctrl->nr_pins; - drvdata->grange.gc = drvdata->gc; - pinctrl_add_gpio_range(drvdata->pctl_dev, &drvdata->grange); + for (bank = 0; bank < drvdata->ctrl->nr_banks; ++bank) { + pin_bank = &drvdata->ctrl->pin_banks[bank]; + pin_bank->grange.name = pin_bank->name; + pin_bank->grange.id = bank; + pin_bank->grange.pin_base = pin_bank->pin_base; + pin_bank->grange.base = pin_bank->gpio_chip.base; + pin_bank->grange.npins = pin_bank->gpio_chip.ngpio; + pin_bank->grange.gc = &pin_bank->gpio_chip; + pinctrl_add_gpio_range(drvdata->pctl_dev, &pin_bank->grange); + } ret = samsung_pinctrl_parse_dt(pdev, drvdata); if (ret) { @@ -740,49 +750,68 @@ static int __init samsung_pinctrl_register(struct platform_device *pdev, return 0; } +static const struct gpio_chip samsung_gpiolib_chip = { + .set = samsung_gpio_set, + .get = samsung_gpio_get, + .direction_input = samsung_gpio_direction_input, + .direction_output = samsung_gpio_direction_output, + .owner = THIS_MODULE, +}; + /* register the gpiolib interface with the gpiolib subsystem */ static int __init samsung_gpiolib_register(struct platform_device *pdev, struct samsung_pinctrl_drv_data *drvdata) { + struct samsung_pin_ctrl *ctrl = drvdata->ctrl; + struct samsung_pin_bank *bank = ctrl->pin_banks; struct gpio_chip *gc; int ret; + int i; - gc = devm_kzalloc(&pdev->dev, sizeof(*gc), GFP_KERNEL); - if (!gc) { - dev_err(&pdev->dev, "mem alloc for gpio_chip failed\n"); - return -ENOMEM; - } - - drvdata->gc = gc; - gc->base = drvdata->ctrl->base; - gc->ngpio = drvdata->ctrl->nr_pins; - gc->dev = &pdev->dev; - gc->set = samsung_gpio_set; - gc->get = samsung_gpio_get; - gc->direction_input = samsung_gpio_direction_input; - gc->direction_output = samsung_gpio_direction_output; - gc->label = drvdata->ctrl->label; - gc->owner = THIS_MODULE; - ret = gpiochip_add(gc); - if (ret) { - dev_err(&pdev->dev, "failed to register gpio_chip %s, error " - "code: %d\n", gc->label, ret); - return ret; + for (i = 0; i < ctrl->nr_banks; ++i, ++bank) { + bank->gpio_chip = samsung_gpiolib_chip; + + gc = &bank->gpio_chip; + gc->base = ctrl->base + bank->pin_base; + gc->ngpio = bank->nr_pins; + gc->dev = &pdev->dev; + gc->of_node = bank->of_node; + gc->label = bank->name; + + ret = gpiochip_add(gc); + if (ret) { + dev_err(&pdev->dev, "failed to register gpio_chip %s, error code: %d\n", + gc->label, ret); + goto fail; + } } return 0; + +fail: + for (--i, --bank; i >= 0; --i, --bank) + if (gpiochip_remove(&bank->gpio_chip)) + dev_err(&pdev->dev, "gpio chip %s remove failed\n", + bank->gpio_chip.label); + return ret; } /* unregister the gpiolib interface with the gpiolib subsystem */ static int __init samsung_gpiolib_unregister(struct platform_device *pdev, struct samsung_pinctrl_drv_data *drvdata) { - int ret = gpiochip_remove(drvdata->gc); - if (ret) { + struct samsung_pin_ctrl *ctrl = drvdata->ctrl; + struct samsung_pin_bank *bank = ctrl->pin_banks; + int ret = 0; + int i; + + for (i = 0; !ret && i < ctrl->nr_banks; ++i, ++bank) + ret = gpiochip_remove(&bank->gpio_chip); + + if (ret) dev_err(&pdev->dev, "gpio chip remove failed\n"); - return ret; - } - return 0; + + return ret; } static const struct of_device_id samsung_pinctrl_dt_match[]; diff --git a/drivers/pinctrl/pinctrl-samsung.h b/drivers/pinctrl/pinctrl-samsung.h index e56be223..dac40ff 100644 --- a/drivers/pinctrl/pinctrl-samsung.h +++ b/drivers/pinctrl/pinctrl-samsung.h @@ -23,6 +23,8 @@ #include #include +#include + /* register offsets within a pin bank */ #define DAT_REG 0x4 #define PUD_REG 0x8 @@ -113,6 +115,8 @@ struct samsung_pinctrl_drv_data; * @of_node: OF node of the bank. * @drvdata: link to controller driver data * @irq_domain: IRQ domain of the bank. + * @gpio_chip: GPIO chip of the bank. + * @grange: linux gpio pin range supported by this bank. */ struct samsung_pin_bank { u32 pctl_offset; @@ -129,6 +133,8 @@ struct samsung_pin_bank { struct device_node *of_node; struct samsung_pinctrl_drv_data *drvdata; struct irq_domain *irq_domain; + struct gpio_chip gpio_chip; + struct pinctrl_gpio_range grange; }; /** @@ -186,8 +192,6 @@ struct samsung_pin_ctrl { * @nr_groups: number of such pin groups. * @pmx_functions: list of pin functions available to the driver. * @nr_function: number of such pin functions. - * @gc: gpio_chip instance registered with gpiolib. - * @grange: linux gpio pin range supported by this controller. */ struct samsung_pinctrl_drv_data { void __iomem *virt_base; @@ -204,9 +208,6 @@ struct samsung_pinctrl_drv_data { unsigned int nr_functions; struct irq_domain *wkup_irqd; - - struct gpio_chip *gc; - struct pinctrl_gpio_range grange; }; /** -- cgit v0.10.2 From a04b07c0fc4d63e3fb9fea84d48a177ac5bd9164 Mon Sep 17 00:00:00 2001 From: Tomasz Figa Date: Thu, 11 Oct 2012 10:11:18 +0200 Subject: pinctrl: samsung: Use per-bank IRQ domain for wake-up interrupts This patch reworks wake-up interrupt handling in pinctrl-exynos driver, so each pin bank, which provides wake-up interrupts, has its own IRQ domain. Information about whether given pin bank provides wake-up interrupts, how many and whether they are separate or muxed are parsed from device tree. It gives following advantages: - interrupts can be specified in device tree in a more readable way, e.g. : device { /* ... */ interrupt-parent = <&gpx2>; interrupts = <4 0>; /* ... */ }; - the amount and layout of interrupts is not hardcoded in the code anymore, but defined in SoC-specific structure - bank and pin of each wake-up interrupt can be easily identified, to allow operations, such as setting the pin to EINT function, from irq_set_type() callback Signed-off-by: Tomasz Figa Reviewed-by: Kyungmin Park Acked-by: Thomas Abraham Signed-off-by: Linus Walleij diff --git a/arch/arm/boot/dts/exynos4210-pinctrl.dtsi b/arch/arm/boot/dts/exynos4210-pinctrl.dtsi index f207d8d..6a4a1a0 100644 --- a/arch/arm/boot/dts/exynos4210-pinctrl.dtsi +++ b/arch/arm/boot/dts/exynos4210-pinctrl.dtsi @@ -445,6 +445,9 @@ #gpio-cells = <2>; interrupt-controller; + interrupt-parent = <&gic>; + interrupts = <0 16 0>, <0 17 0>, <0 18 0>, <0 19 0>, + <0 20 0>, <0 21 0>, <0 22 0>, <0 23 0>; #interrupt-cells = <2>; }; @@ -453,6 +456,9 @@ #gpio-cells = <2>; interrupt-controller; + interrupt-parent = <&gic>; + interrupts = <0 24 0>, <0 25 0>, <0 26 0>, <0 27 0>, + <0 28 0>, <0 29 0>, <0 30 0>, <0 31 0>; #interrupt-cells = <2>; }; diff --git a/arch/arm/boot/dts/exynos4210.dtsi b/arch/arm/boot/dts/exynos4210.dtsi index c27aea7..d877dbe 100644 --- a/arch/arm/boot/dts/exynos4210.dtsi +++ b/arch/arm/boot/dts/exynos4210.dtsi @@ -56,13 +56,7 @@ wakup_eint: wakeup-interrupt-controller { compatible = "samsung,exynos4210-wakeup-eint"; interrupt-parent = <&gic>; - interrupt-controller; - #interrupt-cells = <2>; - interrupts = <0 16 0>, <0 17 0>, <0 18 0>, <0 19 0>, - <0 20 0>, <0 21 0>, <0 22 0>, <0 23 0>, - <0 24 0>, <0 25 0>, <0 26 0>, <0 27 0>, - <0 28 0>, <0 29 0>, <0 30 0>, <0 31 0>, - <0 32 0>; + interrupts = <0 32 0>; }; }; diff --git a/drivers/pinctrl/pinctrl-exynos.c b/drivers/pinctrl/pinctrl-exynos.c index be757b1..4bf2fc4 100644 --- a/drivers/pinctrl/pinctrl-exynos.c +++ b/drivers/pinctrl/pinctrl-exynos.c @@ -218,46 +218,43 @@ static int exynos_eint_gpio_init(struct samsung_pinctrl_drv_data *d) static void exynos_wkup_irq_unmask(struct irq_data *irqd) { - struct samsung_pinctrl_drv_data *d = irq_data_get_irq_chip_data(irqd); - unsigned int bank = irqd->hwirq / EXYNOS_EINT_MAX_PER_BANK; - unsigned int pin = irqd->hwirq & (EXYNOS_EINT_MAX_PER_BANK - 1); - unsigned long reg_mask = d->ctrl->weint_mask + (bank << 2); + struct samsung_pin_bank *b = irq_data_get_irq_chip_data(irqd); + struct samsung_pinctrl_drv_data *d = b->drvdata; + unsigned long reg_mask = d->ctrl->weint_mask + b->eint_offset; unsigned long mask; mask = readl(d->virt_base + reg_mask); - mask &= ~(1 << pin); + mask &= ~(1 << irqd->hwirq); writel(mask, d->virt_base + reg_mask); } static void exynos_wkup_irq_mask(struct irq_data *irqd) { - struct samsung_pinctrl_drv_data *d = irq_data_get_irq_chip_data(irqd); - unsigned int bank = irqd->hwirq / EXYNOS_EINT_MAX_PER_BANK; - unsigned int pin = irqd->hwirq & (EXYNOS_EINT_MAX_PER_BANK - 1); - unsigned long reg_mask = d->ctrl->weint_mask + (bank << 2); + struct samsung_pin_bank *b = irq_data_get_irq_chip_data(irqd); + struct samsung_pinctrl_drv_data *d = b->drvdata; + unsigned long reg_mask = d->ctrl->weint_mask + b->eint_offset; unsigned long mask; mask = readl(d->virt_base + reg_mask); - mask |= 1 << pin; + mask |= 1 << irqd->hwirq; writel(mask, d->virt_base + reg_mask); } static void exynos_wkup_irq_ack(struct irq_data *irqd) { - struct samsung_pinctrl_drv_data *d = irq_data_get_irq_chip_data(irqd); - unsigned int bank = irqd->hwirq / EXYNOS_EINT_MAX_PER_BANK; - unsigned int pin = irqd->hwirq & (EXYNOS_EINT_MAX_PER_BANK - 1); - unsigned long pend = d->ctrl->weint_pend + (bank << 2); + struct samsung_pin_bank *b = irq_data_get_irq_chip_data(irqd); + struct samsung_pinctrl_drv_data *d = b->drvdata; + unsigned long pend = d->ctrl->weint_pend + b->eint_offset; - writel(1 << pin, d->virt_base + pend); + writel(1 << irqd->hwirq, d->virt_base + pend); } static int exynos_wkup_irq_set_type(struct irq_data *irqd, unsigned int type) { - struct samsung_pinctrl_drv_data *d = irq_data_get_irq_chip_data(irqd); - unsigned int bank = irqd->hwirq / EXYNOS_EINT_MAX_PER_BANK; - unsigned int pin = irqd->hwirq & (EXYNOS_EINT_MAX_PER_BANK - 1); - unsigned long reg_con = d->ctrl->weint_con + (bank << 2); + struct samsung_pin_bank *bank = irq_data_get_irq_chip_data(irqd); + struct samsung_pinctrl_drv_data *d = bank->drvdata; + unsigned int pin = irqd->hwirq; + unsigned long reg_con = d->ctrl->weint_con + bank->eint_offset; unsigned long shift = EXYNOS_EINT_CON_LEN * pin; unsigned long con, trig_type; @@ -309,6 +306,7 @@ static struct irq_chip exynos_wkup_irq_chip = { static void exynos_irq_eint0_15(unsigned int irq, struct irq_desc *desc) { struct exynos_weint_data *eintd = irq_get_handler_data(irq); + struct samsung_pin_bank *bank = eintd->bank; struct irq_chip *chip = irq_get_chip(irq); int eint_irq; @@ -318,20 +316,20 @@ static void exynos_irq_eint0_15(unsigned int irq, struct irq_desc *desc) if (chip->irq_ack) chip->irq_ack(&desc->irq_data); - eint_irq = irq_linear_revmap(eintd->domain, eintd->irq); + eint_irq = irq_linear_revmap(bank->irq_domain, eintd->irq); generic_handle_irq(eint_irq); chip->irq_unmask(&desc->irq_data); chained_irq_exit(chip, desc); } -static inline void exynos_irq_demux_eint(int irq_base, unsigned long pend, - struct irq_domain *domain) +static inline void exynos_irq_demux_eint(unsigned long pend, + struct irq_domain *domain) { unsigned int irq; while (pend) { irq = fls(pend) - 1; - generic_handle_irq(irq_find_mapping(domain, irq_base + irq)); + generic_handle_irq(irq_find_mapping(domain, irq)); pend &= ~(1 << irq); } } @@ -340,18 +338,22 @@ static inline void exynos_irq_demux_eint(int irq_base, unsigned long pend, static void exynos_irq_demux_eint16_31(unsigned int irq, struct irq_desc *desc) { struct irq_chip *chip = irq_get_chip(irq); - struct exynos_weint_data *eintd = irq_get_handler_data(irq); - struct samsung_pinctrl_drv_data *d = eintd->domain->host_data; + struct exynos_muxed_weint_data *eintd = irq_get_handler_data(irq); + struct samsung_pinctrl_drv_data *d = eintd->banks[0]->drvdata; + struct samsung_pin_ctrl *ctrl = d->ctrl; unsigned long pend; unsigned long mask; + int i; chained_irq_enter(chip, desc); - pend = readl(d->virt_base + d->ctrl->weint_pend + 0x8); - mask = readl(d->virt_base + d->ctrl->weint_mask + 0x8); - exynos_irq_demux_eint(16, pend & ~mask, eintd->domain); - pend = readl(d->virt_base + d->ctrl->weint_pend + 0xC); - mask = readl(d->virt_base + d->ctrl->weint_mask + 0xC); - exynos_irq_demux_eint(24, pend & ~mask, eintd->domain); + + for (i = 0; i < eintd->nr_banks; ++i) { + struct samsung_pin_bank *b = eintd->banks[i]; + pend = readl(d->virt_base + ctrl->weint_pend + b->eint_offset); + mask = readl(d->virt_base + ctrl->weint_mask + b->eint_offset); + exynos_irq_demux_eint(pend & ~mask, b->irq_domain); + } + chained_irq_exit(chip, desc); } @@ -381,7 +383,11 @@ static int exynos_eint_wkup_init(struct samsung_pinctrl_drv_data *d) struct device *dev = d->dev; struct device_node *wkup_np = NULL; struct device_node *np; + struct samsung_pin_bank *bank; struct exynos_weint_data *weint_data; + struct exynos_muxed_weint_data *muxed_data; + unsigned int muxed_banks = 0; + unsigned int i; int idx, irq; for_each_child_of_node(dev->of_node, np) { @@ -393,40 +399,74 @@ static int exynos_eint_wkup_init(struct samsung_pinctrl_drv_data *d) if (!wkup_np) return -ENODEV; - d->wkup_irqd = irq_domain_add_linear(wkup_np, d->ctrl->nr_wint, - &exynos_wkup_irqd_ops, d); - if (!d->wkup_irqd) { - dev_err(dev, "wakeup irq domain allocation failed\n"); - return -ENXIO; - } + bank = d->ctrl->pin_banks; + for (i = 0; i < d->ctrl->nr_banks; ++i, ++bank) { + if (bank->eint_type != EINT_TYPE_WKUP) + continue; - weint_data = devm_kzalloc(dev, sizeof(*weint_data) * 17, GFP_KERNEL); - if (!weint_data) { - dev_err(dev, "could not allocate memory for weint_data\n"); - return -ENOMEM; - } + bank->irq_domain = irq_domain_add_linear(bank->of_node, + bank->nr_pins, &exynos_wkup_irqd_ops, bank); + if (!bank->irq_domain) { + dev_err(dev, "wkup irq domain add failed\n"); + return -ENXIO; + } - irq = irq_of_parse_and_map(wkup_np, 16); - if (irq) { - weint_data[16].domain = d->wkup_irqd; - irq_set_chained_handler(irq, exynos_irq_demux_eint16_31); - irq_set_handler_data(irq, &weint_data[16]); - } else { - dev_err(dev, "irq number for EINT16-32 not found\n"); - } + if (!of_find_property(bank->of_node, "interrupts", NULL)) { + bank->eint_type = EINT_TYPE_WKUP_MUX; + ++muxed_banks; + continue; + } - for (idx = 0; idx < 16; idx++) { - weint_data[idx].domain = d->wkup_irqd; - weint_data[idx].irq = idx; + weint_data = devm_kzalloc(dev, bank->nr_pins + * sizeof(*weint_data), GFP_KERNEL); + if (!weint_data) { + dev_err(dev, "could not allocate memory for weint_data\n"); + return -ENOMEM; + } - irq = irq_of_parse_and_map(wkup_np, idx); - if (irq) { + for (idx = 0; idx < bank->nr_pins; ++idx) { + irq = irq_of_parse_and_map(bank->of_node, idx); + if (!irq) { + dev_err(dev, "irq number for eint-%s-%d not found\n", + bank->name, idx); + continue; + } + weint_data[idx].irq = idx; + weint_data[idx].bank = bank; irq_set_handler_data(irq, &weint_data[idx]); irq_set_chained_handler(irq, exynos_irq_eint0_15); - } else { - dev_err(dev, "irq number for eint-%x not found\n", idx); } } + + if (!muxed_banks) + return 0; + + irq = irq_of_parse_and_map(wkup_np, 0); + if (!irq) { + dev_err(dev, "irq number for muxed EINTs not found\n"); + return 0; + } + + muxed_data = devm_kzalloc(dev, sizeof(*muxed_data) + + muxed_banks*sizeof(struct samsung_pin_bank *), GFP_KERNEL); + if (!muxed_data) { + dev_err(dev, "could not allocate memory for muxed_data\n"); + return -ENOMEM; + } + + irq_set_chained_handler(irq, exynos_irq_demux_eint16_31); + irq_set_handler_data(irq, muxed_data); + + bank = d->ctrl->pin_banks; + idx = 0; + for (i = 0; i < d->ctrl->nr_banks; ++i, ++bank) { + if (bank->eint_type != EINT_TYPE_WKUP_MUX) + continue; + + muxed_data->banks[idx++] = bank; + } + muxed_data->nr_banks = muxed_banks; + return 0; } @@ -468,10 +508,10 @@ static struct samsung_pin_bank exynos4210_pin_banks1[] = { EXYNOS_PIN_BANK_EINTN(8, 0x1A0, "gpy4"), EXYNOS_PIN_BANK_EINTN(8, 0x1C0, "gpy5"), EXYNOS_PIN_BANK_EINTN(8, 0x1E0, "gpy6"), - EXYNOS_PIN_BANK_EINTN(8, 0xC00, "gpx0"), - EXYNOS_PIN_BANK_EINTN(8, 0xC20, "gpx1"), - EXYNOS_PIN_BANK_EINTN(8, 0xC40, "gpx2"), - EXYNOS_PIN_BANK_EINTN(8, 0xC60, "gpx3"), + EXYNOS_PIN_BANK_EINTW(8, 0xC00, "gpx0", 0x00), + EXYNOS_PIN_BANK_EINTW(8, 0xC20, "gpx1", 0x04), + EXYNOS_PIN_BANK_EINTW(8, 0xC40, "gpx2", 0x08), + EXYNOS_PIN_BANK_EINTW(8, 0xC60, "gpx3", 0x0c), }; /* pin banks of exynos4210 pin-controller 2 */ @@ -498,7 +538,6 @@ struct samsung_pin_ctrl exynos4210_pin_ctrl[] = { /* pin-controller instance 1 data */ .pin_banks = exynos4210_pin_banks1, .nr_banks = ARRAY_SIZE(exynos4210_pin_banks1), - .nr_wint = 32, .geint_con = EXYNOS_GPIO_ECON_OFFSET, .geint_mask = EXYNOS_GPIO_EMASK_OFFSET, .geint_pend = EXYNOS_GPIO_EPEND_OFFSET, diff --git a/drivers/pinctrl/pinctrl-exynos.h b/drivers/pinctrl/pinctrl-exynos.h index f05efa0..0a70889 100644 --- a/drivers/pinctrl/pinctrl-exynos.h +++ b/drivers/pinctrl/pinctrl-exynos.h @@ -73,13 +73,36 @@ .name = id \ } +#define EXYNOS_PIN_BANK_EINTW(pins, reg, id, offs) \ + { \ + .pctl_offset = reg, \ + .nr_pins = pins, \ + .func_width = 4, \ + .pud_width = 2, \ + .drv_width = 2, \ + .eint_type = EINT_TYPE_WKUP, \ + .eint_offset = offs, \ + .name = id \ + } + /** * struct exynos_weint_data: irq specific data for all the wakeup interrupts * generated by the external wakeup interrupt controller. - * @domain: irq domain representing the external wakeup interrupts * @irq: interrupt number within the domain. + * @bank: bank responsible for this interrupt */ struct exynos_weint_data { - struct irq_domain *domain; - u32 irq; + unsigned int irq; + struct samsung_pin_bank *bank; +}; + +/** + * struct exynos_muxed_weint_data: irq specific data for muxed wakeup interrupts + * generated by the external wakeup interrupt controller. + * @nr_banks: count of banks being part of the mux + * @banks: array of banks being part of the mux + */ +struct exynos_muxed_weint_data { + unsigned int nr_banks; + struct samsung_pin_bank *banks[]; }; diff --git a/drivers/pinctrl/pinctrl-samsung.h b/drivers/pinctrl/pinctrl-samsung.h index dac40ff..0670d9e 100644 --- a/drivers/pinctrl/pinctrl-samsung.h +++ b/drivers/pinctrl/pinctrl-samsung.h @@ -66,6 +66,7 @@ enum pincfg_type { * @EINT_TYPE_NONE: bank does not support external interrupts * @EINT_TYPE_GPIO: bank supportes external gpio interrupts * @EINT_TYPE_WKUP: bank supportes external wakeup interrupts + * @EINT_TYPE_WKUP_MUX: bank supports multiplexed external wakeup interrupts * * Samsung GPIO controller groups all the available pins into banks. The pins * in a pin bank can support external gpio interrupts or external wakeup @@ -78,6 +79,7 @@ enum eint_type { EINT_TYPE_NONE, EINT_TYPE_GPIO, EINT_TYPE_WKUP, + EINT_TYPE_WKUP_MUX, }; /* maximum length of a pin in pin descriptor (example: "gpa0-0") */ @@ -143,7 +145,6 @@ struct samsung_pin_bank { * @nr_banks: number of pin banks. * @base: starting system wide pin number. * @nr_pins: number of pins supported by the controller. - * @nr_wint: number of external wakeup interrupts supported. * @geint_con: offset of the ext-gpio controller registers. * @geint_mask: offset of the ext-gpio interrupt mask registers. * @geint_pend: offset of the ext-gpio interrupt pending registers. @@ -163,7 +164,6 @@ struct samsung_pin_ctrl { u32 base; u32 nr_pins; - u32 nr_wint; u32 geint_con; u32 geint_mask; @@ -206,8 +206,6 @@ struct samsung_pinctrl_drv_data { unsigned int nr_groups; const struct samsung_pmx_func *pmx_functions; unsigned int nr_functions; - - struct irq_domain *wkup_irqd; }; /** -- cgit v0.10.2 From 22b9ba033bb4401e4cceb69c9e1af74a4631dd74 Mon Sep 17 00:00:00 2001 From: Tomasz Figa Date: Thu, 11 Oct 2012 10:11:19 +0200 Subject: pinctrl: exynos: Set pin function to EINT in irq_set_type of wake-up EINT Pins used as wake-up interrupts need to be configured as EINTs. This patch adds the required configuration code to exynos_wkup_irq_set_type, to set the pin as EINT when its interrupt trigger type is configured. Signed-off-by: Tomasz Figa Reviewed-by: Kyungmin Park Acked-by: Thomas Abraham Signed-off-by: Linus Walleij diff --git a/drivers/pinctrl/pinctrl-exynos.c b/drivers/pinctrl/pinctrl-exynos.c index 4bf2fc4..73a0aa2 100644 --- a/drivers/pinctrl/pinctrl-exynos.c +++ b/drivers/pinctrl/pinctrl-exynos.c @@ -257,6 +257,7 @@ static int exynos_wkup_irq_set_type(struct irq_data *irqd, unsigned int type) unsigned long reg_con = d->ctrl->weint_con + bank->eint_offset; unsigned long shift = EXYNOS_EINT_CON_LEN * pin; unsigned long con, trig_type; + unsigned int mask; switch (type) { case IRQ_TYPE_EDGE_RISING: @@ -288,6 +289,16 @@ static int exynos_wkup_irq_set_type(struct irq_data *irqd, unsigned int type) con &= ~(EXYNOS_EINT_CON_MASK << shift); con |= trig_type << shift; writel(con, d->virt_base + reg_con); + + reg_con = bank->pctl_offset; + shift = pin * bank->func_width; + mask = (1 << bank->func_width) - 1; + + con = readl(d->virt_base + reg_con); + con &= ~(mask << shift); + con |= EXYNOS_EINT_FUNC << shift; + writel(con, d->virt_base + reg_con); + return 0; } -- cgit v0.10.2 From a19fe2d45cc550ca42a3b0be3e716a8452e4b0c6 Mon Sep 17 00:00:00 2001 From: Tomasz Figa Date: Thu, 11 Oct 2012 10:11:20 +0200 Subject: pinctrl: samsung: Add GPIO to IRQ translation Some drivers require a way to translate GPIO pins to their IRQ numbers. This patch adds the .to_irq() gpiolib callback to pinctrl-samsung driver, which creates (if not present yet) and returns an IRQ mapping for given GPIO pin. Signed-off-by: Tomasz Figa Reviewed-by: Kyungmin Park Acked-by: Thomas Abraham Signed-off-by: Linus Walleij diff --git a/drivers/pinctrl/pinctrl-samsung.c b/drivers/pinctrl/pinctrl-samsung.c index 0a38368..0db88bb 100644 --- a/drivers/pinctrl/pinctrl-samsung.c +++ b/drivers/pinctrl/pinctrl-samsung.c @@ -26,6 +26,7 @@ #include #include #include +#include #include "core.h" #include "pinctrl-samsung.h" @@ -528,6 +529,23 @@ static int samsung_gpio_direction_output(struct gpio_chip *gc, unsigned offset, } /* + * gpiolib gpio_to_irq callback function. Creates a mapping between a GPIO pin + * and a virtual IRQ, if not already present. + */ +static int samsung_gpio_to_irq(struct gpio_chip *gc, unsigned offset) +{ + struct samsung_pin_bank *bank = gc_to_pin_bank(gc); + unsigned int virq; + + if (!bank->irq_domain) + return -ENXIO; + + virq = irq_create_mapping(bank->irq_domain, offset); + + return (virq) ? : -ENXIO; +} + +/* * Parse the pin names listed in the 'samsung,pins' property and convert it * into a list of gpio numbers are create a pin group from it. */ @@ -755,6 +773,7 @@ static const struct gpio_chip samsung_gpiolib_chip = { .get = samsung_gpio_get, .direction_input = samsung_gpio_direction_input, .direction_output = samsung_gpio_direction_output, + .to_irq = samsung_gpio_to_irq, .owner = THIS_MODULE, }; -- cgit v0.10.2 From b33ef91f4b799a5de5904c4b361df97a0c3ec7dd Mon Sep 17 00:00:00 2001 From: Tomasz Figa Date: Thu, 11 Oct 2012 10:11:21 +0200 Subject: Documentation: Update samsung-pinctrl device tree bindings documentation Signed-off-by: Tomasz Figa Reviewed-by: Kyungmin Park Acked-by: Thomas Abraham Signed-off-by: Linus Walleij diff --git a/Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt index 03dee50..63806e2 100644 --- a/Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt +++ b/Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt @@ -13,8 +13,14 @@ Required Properties: - reg: Base address of the pin controller hardware module and length of the address space it occupies. -- interrupts: interrupt specifier for the controller. The format and value of - the interrupt specifier depends on the interrupt parent for the controller. +- Pin banks as child nodes: Pin banks of the controller are represented by child + nodes of the controller node. Bank name is taken from name of the node. Each + bank node must contain following properties: + + - gpio-controller: identifies the node as a gpio controller and pin bank. + - #gpio-cells: number of cells in GPIO specifier. Since the generic GPIO + binding is used, the amount of cells must be specified as 2. See generic + GPIO binding documentation for description of particular cells. - Pin mux/config groups as child nodes: The pin mux (selecting pin function mode) and pin config (pull up/down, driver strength) settings are represented @@ -72,16 +78,24 @@ used as system wakeup events. A. External GPIO Interrupts: For supporting external gpio interrupts, the following properties should be specified in the pin-controller device node. -- interrupt-controller: identifies the controller node as interrupt-parent. -- #interrupt-cells: the value of this property should be 2. - - First Cell: represents the external gpio interrupt number local to the - external gpio interrupt space of the controller. - - Second Cell: flags to identify the type of the interrupt - - 1 = rising edge triggered - - 2 = falling edge triggered - - 3 = rising and falling edge triggered - - 4 = high level triggered - - 8 = low level triggered + - interrupt-parent: phandle of the interrupt parent to which the external + GPIO interrupts are forwarded to. + - interrupts: interrupt specifier for the controller. The format and value of + the interrupt specifier depends on the interrupt parent for the controller. + + In addition, following properties must be present in node of every bank + of pins supporting GPIO interrupts: + + - interrupt-controller: identifies the controller node as interrupt-parent. + - #interrupt-cells: the value of this property should be 2. + - First Cell: represents the external gpio interrupt number local to the + external gpio interrupt space of the controller. + - Second Cell: flags to identify the type of the interrupt + - 1 = rising edge triggered + - 2 = falling edge triggered + - 3 = rising and falling edge triggered + - 4 = high level triggered + - 8 = low level triggered B. External Wakeup Interrupts: For supporting external wakeup interrupts, a child node representing the external wakeup interrupt controller should be @@ -94,6 +108,11 @@ B. External Wakeup Interrupts: For supporting external wakeup interrupts, a found on Samsung Exynos4210 SoC. - interrupt-parent: phandle of the interrupt parent to which the external wakeup interrupts are forwarded to. + - interrupts: interrupt used by multiplexed wakeup interrupts. + + In addition, following properties must be present in node of every bank + of pins supporting wake-up interrupts: + - interrupt-controller: identifies the node as interrupt-parent. - #interrupt-cells: the value of this property should be 2 - First Cell: represents the external wakeup interrupt number local to @@ -105,11 +124,63 @@ B. External Wakeup Interrupts: For supporting external wakeup interrupts, a - 4 = high level triggered - 8 = low level triggered + Node of every bank of pins supporting direct wake-up interrupts (without + multiplexing) must contain following properties: + + - interrupt-parent: phandle of the interrupt parent to which the external + wakeup interrupts are forwarded to. + - interrupts: interrupts of the interrupt parent which are used for external + wakeup interrupts from pins of the bank, must contain interrupts for all + pins of the bank. + Aliases: All the pin controller nodes should be represented in the aliases node using the following format 'pinctrl{n}' where n is a unique number for the alias. +Example: A pin-controller node with pin banks: + + pinctrl_0: pinctrl@11400000 { + compatible = "samsung,pinctrl-exynos4210"; + reg = <0x11400000 0x1000>; + interrupts = <0 47 0>; + + /* ... */ + + /* Pin bank without external interrupts */ + gpy0: gpy0 { + gpio-controller; + #gpio-cells = <2>; + }; + + /* ... */ + + /* Pin bank with external GPIO or muxed wake-up interrupts */ + gpj0: gpj0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + /* ... */ + + /* Pin bank with external direct wake-up interrupts */ + gpx0: gpx0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + interrupt-parent = <&gic>; + interrupts = <0 16 0>, <0 17 0>, <0 18 0>, <0 19 0>, + <0 20 0>, <0 21 0>, <0 22 0>, <0 23 0>; + #interrupt-cells = <2>; + }; + + /* ... */ + }; + Example 1: A pin-controller node with pin groups. pinctrl_0: pinctrl@11400000 { @@ -117,6 +188,8 @@ Example 1: A pin-controller node with pin groups. reg = <0x11400000 0x1000>; interrupts = <0 47 0>; + /* ... */ + uart0_data: uart0-data { samsung,pins = "gpa0-0", "gpa0-1"; samsung,pin-function = <2>; @@ -158,20 +231,14 @@ Example 2: A pin-controller node with external wakeup interrupt controller node. pinctrl_1: pinctrl@11000000 { compatible = "samsung,pinctrl-exynos4210"; reg = <0x11000000 0x1000>; - interrupts = <0 46 0>; - interrupt-controller; - #interrupt-cells = <2>; + interrupts = <0 46 0> - wakup_eint: wakeup-interrupt-controller { + /* ... */ + + wakeup-interrupt-controller { compatible = "samsung,exynos4210-wakeup-eint"; interrupt-parent = <&gic>; - interrupt-controller; - #interrupt-cells = <2>; - interrupts = <0 16 0>, <0 17 0>, <0 18 0>, <0 19 0>, - <0 20 0>, <0 21 0>, <0 22 0>, <0 23 0>, - <0 24 0>, <0 25 0>, <0 26 0>, <0 27 0>, - <0 28 0>, <0 29 0>, <0 30 0>, <0 31 0>, - <0 32 0>; + interrupts = <0 32 0>; }; }; @@ -190,7 +257,8 @@ Example 4: Set up the default pin state for uart controller. static int s3c24xx_serial_probe(struct platform_device *pdev) { struct pinctrl *pinctrl; - ... - ... + + /* ... */ + pinctrl = devm_pinctrl_get_select_default(&pdev->dev); } -- cgit v0.10.2 From a3a6c6a3a13c8fc946da86d0314f4c0d013e749d Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Mon, 1 Oct 2012 09:37:39 +0200 Subject: ARM: ux500: support the HREFP520 board variant This adds support for another board registered for the old machine type system. Mainly doing this because it is all that is required to get that board working, everything else stays the same. Signed-off-by: Linus Walleij diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c index 416d436..e4dad22 100644 --- a/arch/arm/mach-ux500/board-mop500.c +++ b/arch/arm/mach-ux500/board-mop500.c @@ -1,6 +1,5 @@ - /* - * Copyright (C) 2008-2009 ST-Ericsson + * Copyright (C) 2008-2012 ST-Ericsson * * Author: Srinidhi KASAGAR * @@ -701,6 +700,16 @@ MACHINE_START(U8500, "ST-Ericsson MOP500 platform") .init_late = ux500_init_late, MACHINE_END +MACHINE_START(U8520, "ST-Ericsson U8520 Platform HREFP520") + .atag_offset = 0x100, + .map_io = u8500_map_io, + .init_irq = ux500_init_irq, + .timer = &ux500_timer, + .handle_irq = gic_handle_irq, + .init_machine = mop500_init_machine, + .init_late = ux500_init_late, +MACHINE_END + MACHINE_START(HREFV60, "ST-Ericsson U8500 Platform HREFv60+") .atag_offset = 0x100, .smp = smp_ops(ux500_smp_ops), -- cgit v0.10.2 From 4040d10a3d44023703f81083bb90a3eb45a39eee Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Wed, 3 Oct 2012 14:26:12 +0200 Subject: ARM: ux500: add DB serial number to entropy pool This throws the DB (digital baseband, ASIC) serial number, process type etc into the entropy pool by way of the device_add_randomness() call. This should make every device have a unique pool state upon boot. Cc: Theodore Tso Signed-off-by: Linus Walleij diff --git a/arch/arm/mach-ux500/cpu-db8500.c b/arch/arm/mach-ux500/cpu-db8500.c index bcdfe6b..50202a1 100644 --- a/arch/arm/mach-ux500/cpu-db8500.c +++ b/arch/arm/mach-ux500/cpu-db8500.c @@ -17,6 +17,8 @@ #include #include #include +#include +#include #include #include @@ -24,7 +26,6 @@ #include #include #include -#include #include #include "devices-db8500.h" @@ -187,6 +188,8 @@ static const char *db8500_read_soc_id(void) { void __iomem *uid = __io_address(U8500_BB_UID_BASE); + /* Throw these device-specific numbers into the entropy pool */ + add_device_randomness(uid, 0x14); return kasprintf(GFP_KERNEL, "%08x%08x%08x%08x%08x", readl((u32 *)uid+1), readl((u32 *)uid+1), readl((u32 *)uid+2), -- cgit v0.10.2 From b6f1ffed9d8a830ab94fd3fc6182e2fc8c77cba0 Mon Sep 17 00:00:00 2001 From: "m-karicheri2@ti.com" Date: Thu, 2 Aug 2012 16:53:48 +0000 Subject: ARM: davinci: convert platform code to use clk_prepare/clk_unprepare As a first step towards migrating davinci platforms to use common clock framework, replace all instances of clk_enable() with clk_prepare_enable() and clk_disable() with clk_disable_unprepare(). Until the platform is switched to use the CONFIG_HAVE_CLK_PREPARE Kconfig variable, this just adds a might_sleep() call and would work without any issues. This will make it easy later to switch to common clk based implementation of clk driver from DaVinci specific driver. Signed-off-by: Murali Karicheri Reviewed-by: Mike Turquette Signed-off-by: Sekhar Nori diff --git a/arch/arm/mach-davinci/board-dm355-evm.c b/arch/arm/mach-davinci/board-dm355-evm.c index 88ebea8..cdf8d07 100644 --- a/arch/arm/mach-davinci/board-dm355-evm.c +++ b/arch/arm/mach-davinci/board-dm355-evm.c @@ -324,7 +324,7 @@ static __init void dm355_evm_init(void) if (IS_ERR(aemif)) WARN("%s: unable to get AEMIF clock\n", __func__); else - clk_enable(aemif); + clk_prepare_enable(aemif); platform_add_devices(davinci_evm_devices, ARRAY_SIZE(davinci_evm_devices)); diff --git a/arch/arm/mach-davinci/board-dm355-leopard.c b/arch/arm/mach-davinci/board-dm355-leopard.c index 2f88103..d419545 100644 --- a/arch/arm/mach-davinci/board-dm355-leopard.c +++ b/arch/arm/mach-davinci/board-dm355-leopard.c @@ -246,7 +246,7 @@ static __init void dm355_leopard_init(void) if (IS_ERR(aemif)) WARN("%s: unable to get AEMIF clock\n", __func__); else - clk_enable(aemif); + clk_prepare_enable(aemif); platform_add_devices(davinci_leopard_devices, ARRAY_SIZE(davinci_leopard_devices)); diff --git a/arch/arm/mach-davinci/board-dm365-evm.c b/arch/arm/mach-davinci/board-dm365-evm.c index 1b4a8ad..5d49c75 100644 --- a/arch/arm/mach-davinci/board-dm365-evm.c +++ b/arch/arm/mach-davinci/board-dm365-evm.c @@ -478,7 +478,7 @@ static void __init evm_init_cpld(void) aemif_clk = clk_get(NULL, "aemif"); if (IS_ERR(aemif_clk)) return; - clk_enable(aemif_clk); + clk_prepare_enable(aemif_clk); if (request_mem_region(DM365_ASYNC_EMIF_DATA_CE1_BASE, SECTION_SIZE, "cpld") == NULL) @@ -489,7 +489,7 @@ static void __init evm_init_cpld(void) SECTION_SIZE); fail: pr_err("ERROR: can't map CPLD\n"); - clk_disable(aemif_clk); + clk_disable_unprepare(aemif_clk); return; } diff --git a/arch/arm/mach-davinci/board-dm644x-evm.c b/arch/arm/mach-davinci/board-dm644x-evm.c index f22572ce..a84dfcb 100644 --- a/arch/arm/mach-davinci/board-dm644x-evm.c +++ b/arch/arm/mach-davinci/board-dm644x-evm.c @@ -776,7 +776,7 @@ static __init void davinci_evm_init(void) struct davinci_soc_info *soc_info = &davinci_soc_info; aemif_clk = clk_get(NULL, "aemif"); - clk_enable(aemif_clk); + clk_prepare_enable(aemif_clk); if (HAS_ATA) { if (HAS_NAND || HAS_NOR) diff --git a/arch/arm/mach-davinci/board-neuros-osd2.c b/arch/arm/mach-davinci/board-neuros-osd2.c index 144bf31..3e3e3af 100644 --- a/arch/arm/mach-davinci/board-neuros-osd2.c +++ b/arch/arm/mach-davinci/board-neuros-osd2.c @@ -188,7 +188,7 @@ static __init void davinci_ntosd2_init(void) struct davinci_soc_info *soc_info = &davinci_soc_info; aemif_clk = clk_get(NULL, "aemif"); - clk_enable(aemif_clk); + clk_prepare_enable(aemif_clk); if (HAS_ATA) { if (HAS_NAND) diff --git a/arch/arm/mach-davinci/devices-da8xx.c b/arch/arm/mach-davinci/devices-da8xx.c index bd2f72b..d53612f 100644 --- a/arch/arm/mach-davinci/devices-da8xx.c +++ b/arch/arm/mach-davinci/devices-da8xx.c @@ -900,7 +900,7 @@ static int da850_sata_init(struct device *dev, void __iomem *addr) if (IS_ERR(da850_sata_clk)) return PTR_ERR(da850_sata_clk); - ret = clk_enable(da850_sata_clk); + ret = clk_prepare_enable(da850_sata_clk); if (ret) goto err0; @@ -931,7 +931,7 @@ static int da850_sata_init(struct device *dev, void __iomem *addr) return 0; err1: - clk_disable(da850_sata_clk); + clk_disable_unprepare(da850_sata_clk); err0: clk_put(da850_sata_clk); return ret; @@ -939,7 +939,7 @@ err0: static void da850_sata_exit(struct device *dev) { - clk_disable(da850_sata_clk); + clk_disable_unprepare(da850_sata_clk); clk_put(da850_sata_clk); } diff --git a/arch/arm/mach-davinci/serial.c b/arch/arm/mach-davinci/serial.c index 1875740..24ddb0d 100644 --- a/arch/arm/mach-davinci/serial.c +++ b/arch/arm/mach-davinci/serial.c @@ -95,7 +95,7 @@ int __init davinci_serial_init(struct davinci_uart_config *info) continue; } - clk_enable(uart_clk); + clk_prepare_enable(uart_clk); p->uartclk = clk_get_rate(uart_clk); if (!p->membase && p->mapbase) { diff --git a/arch/arm/mach-davinci/time.c b/arch/arm/mach-davinci/time.c index 75da315..9847938 100644 --- a/arch/arm/mach-davinci/time.c +++ b/arch/arm/mach-davinci/time.c @@ -379,7 +379,7 @@ static void __init davinci_timer_init(void) timer_clk = clk_get(NULL, "timer0"); BUG_ON(IS_ERR(timer_clk)); - clk_enable(timer_clk); + clk_prepare_enable(timer_clk); /* init timer hw */ timer_init(); @@ -429,7 +429,7 @@ void davinci_watchdog_reset(struct platform_device *pdev) wd_clk = clk_get(&pdev->dev, NULL); if (WARN_ON(IS_ERR(wd_clk))) return; - clk_enable(wd_clk); + clk_prepare_enable(wd_clk); /* disable, internal clock source */ __raw_writel(0, base + TCR); -- cgit v0.10.2 From 4a8355c4c34f55aecd204604f02e179eaee15502 Mon Sep 17 00:00:00 2001 From: Alexander Shiyan Date: Wed, 10 Oct 2012 19:45:27 +0400 Subject: ARM: clps711x: convert to clockevents This patch converts CLPS711X-platform to use modern clockevent API. Signed-off-by: Alexander Shiyan Signed-off-by: Arnd Bergmann diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 73067ef..c989c61 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -364,10 +364,10 @@ config ARCH_CNS3XXX config ARCH_CLPS711X bool "Cirrus Logic CLPS711x/EP721x/EP731x-based" - select ARCH_USES_GETTIMEOFFSET select CLKDEV_LOOKUP select COMMON_CLK select CPU_ARM720T + select GENERIC_CLOCKEVENTS select NEED_MACH_MEMORY_H help Support for Cirrus Logic 711x/721x/731x based boards. diff --git a/arch/arm/mach-clps711x/common.c b/arch/arm/mach-clps711x/common.c index 509243d..218684f 100644 --- a/arch/arm/mach-clps711x/common.c +++ b/arch/arm/mach-clps711x/common.c @@ -21,13 +21,14 @@ */ #include #include +#include #include #include #include #include +#include #include -#include #include #include #include @@ -36,7 +37,6 @@ static struct clk *clk_pll, *clk_bus, *clk_uart, *clk_timerl, *clk_timerh, *clk_tint, *clk_spi; -static unsigned long latch; /* * This maps the generic CLPS711x registers @@ -158,32 +158,29 @@ void __init clps711x_init_irq(void) clps_writel(0, KBDEOI); } -/* - * gettimeoffset() returns time since last timer tick, in usecs. - * - * 'LATCH' is hwclock ticks (see CLOCK_TICK_RATE in timex.h) per jiffy. - * 'tick' is usecs per jiffy. - */ -static unsigned long clps711x_gettimeoffset(void) +static void clps711x_clockevent_set_mode(enum clock_event_mode mode, + struct clock_event_device *evt) { - unsigned long hwticks; - hwticks = latch - (clps_readl(TC2D) & 0xffff); - return (hwticks * (tick_nsec / 1000)) / latch; } -/* - * IRQ handler for the timer - */ -static irqreturn_t p720t_timer_interrupt(int irq, void *dev_id) +static struct clock_event_device clockevent_clps711x = { + .name = "CLPS711x Clockevents", + .rating = 300, + .features = CLOCK_EVT_FEAT_PERIODIC, + .set_mode = clps711x_clockevent_set_mode, +}; + +static irqreturn_t clps711x_timer_interrupt(int irq, void *dev_id) { - timer_tick(); + clockevent_clps711x.event_handler(&clockevent_clps711x); + return IRQ_HANDLED; } static struct irqaction clps711x_timer_irq = { .name = "CLPS711x Timer Tick", .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL, - .handler = p720t_timer_interrupt, + .handler = clps711x_timer_interrupt, }; static void add_fixed_clk(struct clk *clk, const char *name, int rate) @@ -244,20 +241,19 @@ static void __init clps711x_timer_init(void) pr_info("CPU frequency set at %i Hz.\n", cpu); - latch = (timh + HZ / 2) / HZ; + clps_writew(DIV_ROUND_CLOSEST(timh, HZ), TC2D); tmp = clps_readl(SYSCON1); tmp |= SYSCON1_TC2S | SYSCON1_TC2M; clps_writel(tmp, SYSCON1); - clps_writel(latch - 1, TC2D); + clockevents_config_and_register(&clockevent_clps711x, timh, 1, 0xffff); setup_irq(IRQ_TC2OI, &clps711x_timer_irq); } struct sys_timer clps711x_timer = { .init = clps711x_timer_init, - .offset = clps711x_gettimeoffset, }; void clps711x_restart(char mode, const char *cmd) -- cgit v0.10.2 From 66e972b4bd98cdf82ad6d04051a5f508ad73a8dd Mon Sep 17 00:00:00 2001 From: Alexander Shiyan Date: Wed, 10 Oct 2012 19:45:28 +0400 Subject: ARM: clps711x: p720t: remove missing #include Signed-off-by: Alexander Shiyan Signed-off-by: Arnd Bergmann diff --git a/arch/arm/mach-clps711x/p720t.c b/arch/arm/mach-clps711x/p720t.c index b752b58..7680bea 100644 --- a/arch/arm/mach-clps711x/p720t.c +++ b/arch/arm/mach-clps711x/p720t.c @@ -36,8 +36,6 @@ #include #include -#include - #include "common.h" /* -- cgit v0.10.2 From 74fde6de4f33e6d6bc3120ad517b8a4e4eae1851 Mon Sep 17 00:00:00 2001 From: Alexander Shiyan Date: Wed, 10 Oct 2012 19:45:29 +0400 Subject: ARM: clps711x: rework IRQ sybsustem initialization Reworked IRQ subsystem to be able to use some interrupts with "End of interrupt" handler. Signed-off-by: Alexander Shiyan Signed-off-by: Arnd Bergmann diff --git a/arch/arm/mach-clps711x/common.c b/arch/arm/mach-clps711x/common.c index 218684f..47fb496 100644 --- a/arch/arm/mach-clps711x/common.c +++ b/arch/arm/mach-clps711x/common.c @@ -66,6 +66,10 @@ static void int1_mask(struct irq_data *d) static void int1_ack(struct irq_data *d) { +} + +static void int1_eoi(struct irq_data *d) +{ switch (d->irq) { case IRQ_CSINT: clps_writel(0, COEOI); break; case IRQ_TC1OI: clps_writel(0, TC1EOI); break; @@ -86,7 +90,9 @@ static void int1_unmask(struct irq_data *d) } static struct irq_chip int1_chip = { + .name = "Interrupt Vector 1 ", .irq_ack = int1_ack, + .irq_eoi = int1_eoi, .irq_mask = int1_mask, .irq_unmask = int1_unmask, }; @@ -102,6 +108,10 @@ static void int2_mask(struct irq_data *d) static void int2_ack(struct irq_data *d) { +} + +static void int2_eoi(struct irq_data *d) +{ switch (d->irq) { case IRQ_KBDINT: clps_writel(0, KBDEOI); break; } @@ -117,45 +127,68 @@ static void int2_unmask(struct irq_data *d) } static struct irq_chip int2_chip = { + .name = "Interrupt Vector 2 ", .irq_ack = int2_ack, + .irq_eoi = int2_eoi, .irq_mask = int2_mask, .irq_unmask = int2_unmask, }; +struct clps711x_irqdesc { + int nr; + struct irq_chip *chip; + irq_flow_handler_t handle; +}; + +static struct clps711x_irqdesc clps711x_irqdescs[] __initdata = { + { IRQ_CSINT, &int1_chip, handle_fasteoi_irq, }, + { IRQ_EINT1, &int1_chip, handle_level_irq, }, + { IRQ_EINT2, &int1_chip, handle_level_irq, }, + { IRQ_EINT3, &int1_chip, handle_level_irq, }, + { IRQ_TC1OI, &int1_chip, handle_fasteoi_irq, }, + { IRQ_TC2OI, &int1_chip, handle_fasteoi_irq, }, + { IRQ_RTCMI, &int1_chip, handle_fasteoi_irq, }, + { IRQ_TINT, &int1_chip, handle_fasteoi_irq, }, + { IRQ_UTXINT1, &int1_chip, handle_level_irq, }, + { IRQ_URXINT1, &int1_chip, handle_level_irq, }, + { IRQ_UMSINT, &int1_chip, handle_fasteoi_irq, }, + { IRQ_SSEOTI, &int1_chip, handle_level_irq, }, + { IRQ_KBDINT, &int2_chip, handle_fasteoi_irq, }, + { IRQ_SS2RX, &int2_chip, handle_level_irq, }, + { IRQ_SS2TX, &int2_chip, handle_level_irq, }, + { IRQ_UTXINT2, &int2_chip, handle_level_irq, }, + { IRQ_URXINT2, &int2_chip, handle_level_irq, }, +}; + void __init clps711x_init_irq(void) { unsigned int i; - for (i = 0; i < NR_IRQS; i++) { - if (INT1_IRQS & (1 << i)) { - irq_set_chip_and_handler(i, &int1_chip, - handle_level_irq); - set_irq_flags(i, IRQF_VALID | IRQF_PROBE); - } - if (INT2_IRQS & (1 << i)) { - irq_set_chip_and_handler(i, &int2_chip, - handle_level_irq); - set_irq_flags(i, IRQF_VALID | IRQF_PROBE); - } - } - - /* - * Disable interrupts - */ + /* Disable interrupts */ clps_writel(0, INTMR1); clps_writel(0, INTMR2); + clps_writel(0, INTMR3); - /* - * Clear down any pending interrupts - */ + /* Clear down any pending interrupts */ + clps_writel(0, BLEOI); + clps_writel(0, MCEOI); clps_writel(0, COEOI); clps_writel(0, TC1EOI); clps_writel(0, TC2EOI); clps_writel(0, RTCEOI); clps_writel(0, TEOI); clps_writel(0, UMSEOI); - clps_writel(0, SYNCIO); clps_writel(0, KBDEOI); + clps_writel(0, SRXEOF); + clps_writel(0xffffffff, DAISR); + + for (i = 0; i < ARRAY_SIZE(clps711x_irqdescs); i++) { + irq_set_chip_and_handler(clps711x_irqdescs[i].nr, + clps711x_irqdescs[i].chip, + clps711x_irqdescs[i].handle); + set_irq_flags(clps711x_irqdescs[i].nr, + IRQF_VALID | IRQF_PROBE); + } } static void clps711x_clockevent_set_mode(enum clock_event_mode mode, diff --git a/arch/arm/mach-clps711x/include/mach/irqs.h b/arch/arm/mach-clps711x/include/mach/irqs.h index 14d215f..1ea56db 100644 --- a/arch/arm/mach-clps711x/include/mach/irqs.h +++ b/arch/arm/mach-clps711x/include/mach/irqs.h @@ -34,8 +34,6 @@ #define IRQ_UMSINT 14 #define IRQ_SSEOTI 15 -#define INT1_IRQS (0x0000fff0) - /* * Interrupts from INTSR2 */ @@ -45,6 +43,4 @@ #define IRQ_UTXINT2 (16+12) /* bit 12 */ #define IRQ_URXINT2 (16+13) /* bit 13 */ -#define INT2_IRQS (0x30070000) - #define NR_IRQS 30 -- cgit v0.10.2 From 36504ac131d14611dded451dd8b9f8426d084111 Mon Sep 17 00:00:00 2001 From: Alexander Shiyan Date: Wed, 10 Oct 2012 19:45:30 +0400 Subject: ARM: clps711x: added missing definitions Signed-off-by: Alexander Shiyan Signed-off-by: Arnd Bergmann diff --git a/arch/arm/mach-clps711x/include/mach/clps711x.h b/arch/arm/mach-clps711x/include/mach/clps711x.h index c82e21c..aee352c 100644 --- a/arch/arm/mach-clps711x/include/mach/clps711x.h +++ b/arch/arm/mach-clps711x/include/mach/clps711x.h @@ -257,6 +257,9 @@ #define MEMCFG_BUS_WIDTH_16 (0) #define MEMCFG_BUS_WIDTH_8 (3) +#define MEMCFG_SQAEN (1 << 6) +#define MEMCFG_CLKENB (1 << 7) + #define MEMCFG_WAITSTATE_8_3 (0 << 2) #define MEMCFG_WAITSTATE_7_3 (1 << 2) #define MEMCFG_WAITSTATE_6_3 (2 << 2) -- cgit v0.10.2 From 6cb1b145b912721f7a00f3fb5938765b34558b08 Mon Sep 17 00:00:00 2001 From: Alexander Shiyan Date: Wed, 10 Oct 2012 19:45:31 +0400 Subject: ARM: clps711x: make all virtual addresses definition via one macro This patch make all virtual addresses definition via one macro. This modification allows to avoid warning "BUG: mapping for 0x80000000 at 0xff000000 out of vmalloc space". Signed-off-by: Alexander Shiyan Signed-off-by: Arnd Bergmann diff --git a/arch/arm/mach-clps711x/autcpu12.c b/arch/arm/mach-clps711x/autcpu12.c index 3287191..214547b 100644 --- a/arch/arm/mach-clps711x/autcpu12.c +++ b/arch/arm/mach-clps711x/autcpu12.c @@ -39,19 +39,10 @@ #include "common.h" -/* - * The on-chip registers are given a size of 1MB so that a section can - * be used to map them; this saves a page table. This is the place to - * add mappings for ROM, expansion memory, PCMCIA, etc. (if static - * mappings are chosen for those areas). - * -*/ - static struct map_desc autcpu12_io_desc[] __initdata = { - /* memory-mapped extra io and CS8900A Ethernet chip */ - /* ethernet chip */ - { - .virtual = AUTCPU12_VIRT_CS8900A, + /* Memory-mapped extra io and CS8900A Ethernet chip */ + { + .virtual = IO_ADDRESS(AUTCPU12_PHYS_CS8900A), .pfn = __phys_to_pfn(AUTCPU12_PHYS_CS8900A), .length = SZ_1M, .type = MT_DEVICE diff --git a/arch/arm/mach-clps711x/cdb89712.c b/arch/arm/mach-clps711x/cdb89712.c index c314f49..d90d25c 100644 --- a/arch/arm/mach-clps711x/cdb89712.c +++ b/arch/arm/mach-clps711x/cdb89712.c @@ -40,8 +40,8 @@ */ static struct map_desc cdb89712_io_desc[] __initdata = { { - .virtual = ETHER_BASE, - .pfn =__phys_to_pfn(ETHER_START), + .virtual = IO_ADDRESS(ETHER_PHYS_BASE), + .pfn = __phys_to_pfn(ETHER_PHYS_BASE), .length = ETHER_SIZE, .type = MT_DEVICE } diff --git a/arch/arm/mach-clps711x/common.c b/arch/arm/mach-clps711x/common.c index 47fb496..286d6e6 100644 --- a/arch/arm/mach-clps711x/common.c +++ b/arch/arm/mach-clps711x/common.c @@ -45,7 +45,7 @@ static struct map_desc clps711x_io_desc[] __initdata = { { .virtual = (unsigned long)CLPS711X_VIRT_BASE, .pfn = __phys_to_pfn(CLPS711X_PHYS_BASE), - .length = SZ_1M, + .length = SZ_64K, .type = MT_DEVICE } }; diff --git a/arch/arm/mach-clps711x/edb7211-mm.c b/arch/arm/mach-clps711x/edb7211-mm.c index 4372f06..054eaa0 100644 --- a/arch/arm/mach-clps711x/edb7211-mm.c +++ b/arch/arm/mach-clps711x/edb7211-mm.c @@ -51,23 +51,23 @@ extern void clps711x_map_io(void); * happens). */ static struct map_desc edb7211_io_desc[] __initdata = { - { /* memory-mapped extra keyboard row */ - .virtual = EP7211_VIRT_EXTKBD, + { /* Memory-mapped extra keyboard row */ + .virtual = IO_ADDRESS(EP7211_PHYS_EXTKBD), .pfn = __phys_to_pfn(EP7211_PHYS_EXTKBD), .length = SZ_1M, .type = MT_DEVICE, - }, { /* and CS8900A Ethernet chip */ - .virtual = EP7211_VIRT_CS8900A, + }, { /* CS8900A Ethernet chip */ + .virtual = IO_ADDRESS(EP7211_PHYS_CS8900A), .pfn = __phys_to_pfn(EP7211_PHYS_CS8900A), .length = SZ_1M, .type = MT_DEVICE, - }, { /* flash banks */ - .virtual = EP7211_VIRT_FLASH1, + }, { /* Flash bank 0 */ + .virtual = IO_ADDRESS(EP7211_PHYS_FLASH1), .pfn = __phys_to_pfn(EP7211_PHYS_FLASH1), .length = SZ_8M, .type = MT_DEVICE, - }, { - .virtual = EP7211_VIRT_FLASH2, + }, { /* Flash bank 1 */ + .virtual = IO_ADDRESS(EP7211_PHYS_FLASH2), .pfn = __phys_to_pfn(EP7211_PHYS_FLASH2), .length = SZ_8M, .type = MT_DEVICE, diff --git a/arch/arm/mach-clps711x/include/mach/autcpu12.h b/arch/arm/mach-clps711x/include/mach/autcpu12.h index 1588a36..f95ce6f 100644 --- a/arch/arm/mach-clps711x/include/mach/autcpu12.h +++ b/arch/arm/mach-clps711x/include/mach/autcpu12.h @@ -20,12 +20,8 @@ #ifndef __ASM_ARCH_AUTCPU12_H #define __ASM_ARCH_AUTCPU12_H -/* - * The CS8900A ethernet chip has its I/O registers wired to chip select 2 - * (nCS2). This is the mapping for it. - */ -#define AUTCPU12_PHYS_CS8900A CS2_PHYS_BASE /* physical */ -#define AUTCPU12_VIRT_CS8900A (0xfe000000) /* virtual */ +/* The CS8900A ethernet chip has its I/O registers wired to chip select 2 */ +#define AUTCPU12_PHYS_CS8900A CS2_PHYS_BASE /* * The flash bank is wired to chip select 0 @@ -34,11 +30,9 @@ /* offset for device specific information structure */ #define AUTCPU12_LCDINFO_OFFS (0x00010000) -/* -* Videomemory is the internal SRAM (CS 6) -*/ + +/* Videomemory in the internal SRAM (CS 6) */ #define AUTCPU12_PHYS_VIDEO CS6_PHYS_BASE -#define AUTCPU12_VIRT_VIDEO (0xfd000000) /* * All special IO's are tied to CS1 diff --git a/arch/arm/mach-clps711x/include/mach/hardware.h b/arch/arm/mach-clps711x/include/mach/hardware.h index 8497775..0a3df25 100644 --- a/arch/arm/mach-clps711x/include/mach/hardware.h +++ b/arch/arm/mach-clps711x/include/mach/hardware.h @@ -24,7 +24,10 @@ #include -#define CLPS711X_VIRT_BASE IOMEM(0xff000000) +#define IO_ADDRESS(x) (0xdc000000 + (((x) & 0x03ffffff) | \ + (((x) >> 2) & 0x3c000000))) + +#define CLPS711X_VIRT_BASE IOMEM(IO_ADDRESS(CLPS711X_PHYS_BASE)) #ifndef __ASSEMBLY__ #define clps_readb(off) readb(CLPS711X_VIRT_BASE + (off)) @@ -61,58 +64,25 @@ #define CS7_PHYS_BASE (0x00000000) #endif -#define SYSPLD_VIRT_BASE 0xfe000000 -#define SYSPLD_BASE SYSPLD_VIRT_BASE - #if defined (CONFIG_ARCH_CDB89712) -#define ETHER_START 0x20000000 -#define ETHER_SIZE 0x1000 -#define ETHER_BASE 0xfe000000 +#define ETHER_PHYS_BASE CS2_PHYS_BASE +#define ETHER_SIZE 0x1000 #endif #if defined (CONFIG_ARCH_EDB7211) -/* - * The extra 8 lines of the keyboard matrix are wired to chip select 3 (nCS3) - * and repeat across it. This is the mapping for it. - * - * In jumpered boot mode, nCS3 is mapped to 0x4000000, not 0x3000000. This - * was cause for much consternation and headscratching. This should probably - * be made a compile/run time kernel option. - */ -#define EP7211_PHYS_EXTKBD CS3_PHYS_BASE /* physical */ - -#define EP7211_VIRT_EXTKBD (0xfd000000) /* virtual */ - - -/* - * The CS8900A ethernet chip has its I/O registers wired to chip select 2 - * (nCS2). This is the mapping for it. - * - * In jumpered boot mode, nCS2 is mapped to 0x5000000, not 0x2000000. This - * was cause for much consternation and headscratching. This should probably - * be made a compile/run time kernel option. - */ -#define EP7211_PHYS_CS8900A CS2_PHYS_BASE /* physical */ - -#define EP7211_VIRT_CS8900A (0xfc000000) /* virtual */ +/* The extra 8 lines of the keyboard matrix are wired to chip select 3 */ +#define EP7211_PHYS_EXTKBD CS3_PHYS_BASE +/* The CS8900A ethernet chip has its I/O registers wired to chip select 2 */ +#define EP7211_PHYS_CS8900A CS2_PHYS_BASE -/* - * The two flash banks are wired to chip selects 0 and 1. This is the mapping - * for them. - * - * nCS0 and nCS1 are at 0x70000000 and 0x60000000, respectively, when running - * in jumpered boot mode. - */ -#define EP7211_PHYS_FLASH1 CS0_PHYS_BASE /* physical */ -#define EP7211_PHYS_FLASH2 CS1_PHYS_BASE /* physical */ - -#define EP7211_VIRT_FLASH1 (0xfa000000) /* virtual */ -#define EP7211_VIRT_FLASH2 (0xfb000000) /* virtual */ +/* The two flash banks are wired to chip selects 0 and 1 */ +#define EP7211_PHYS_FLASH1 CS0_PHYS_BASE +#define EP7211_PHYS_FLASH2 CS1_PHYS_BASE #endif /* CONFIG_ARCH_EDB7211 */ diff --git a/arch/arm/mach-clps711x/include/mach/syspld.h b/arch/arm/mach-clps711x/include/mach/syspld.h index f7f4c12..9a43315 100644 --- a/arch/arm/mach-clps711x/include/mach/syspld.h +++ b/arch/arm/mach-clps711x/include/mach/syspld.h @@ -23,14 +23,9 @@ #define __ASM_ARCH_SYSPLD_H #define SYSPLD_PHYS_BASE (0x10000000) +#define SYSPLD_VIRT_BASE IO_ADDRESS(SYSPLD_PHYS_BASE) -#ifndef __ASSEMBLY__ -#include - -#define SYSPLD_REG(type,off) (*(volatile type *)(SYSPLD_BASE + off)) -#else -#define SYSPLD_REG(type,off) (off) -#endif +#define SYSPLD_REG(type, off) (*(volatile type *)(SYSPLD_VIRT_BASE + (off))) #define PLD_INT SYSPLD_REG(u32, 0x000000) #define PLD_INT_PENIRQ (1 << 5) diff --git a/arch/arm/mach-clps711x/p720t.c b/arch/arm/mach-clps711x/p720t.c index 7680bea..dd89950 100644 --- a/arch/arm/mach-clps711x/p720t.c +++ b/arch/arm/mach-clps711x/p720t.c @@ -39,22 +39,16 @@ #include "common.h" /* - * Map the P720T system PLD. It occupies two address spaces: - * SYSPLD_PHYS_BASE and SYSPLD_PHYS_BASE + 0x00400000 - * We map both here. + * Map the P720T system PLD. It occupies two address spaces: + * 0x10000000 and 0x10400000. We map both regions as one. */ static struct map_desc p720t_io_desc[] __initdata = { { .virtual = SYSPLD_VIRT_BASE, .pfn = __phys_to_pfn(SYSPLD_PHYS_BASE), - .length = SZ_1M, - .type = MT_DEVICE - }, { - .virtual = 0xfe400000, - .pfn = __phys_to_pfn(0x10400000), - .length = SZ_1M, - .type = MT_DEVICE - } + .length = SZ_8M, + .type = MT_DEVICE, + }, }; static void __init -- cgit v0.10.2 From 658b14627c2d948d3d3827ff651cef2737fe5005 Mon Sep 17 00:00:00 2001 From: Alexander Shiyan Date: Wed, 10 Oct 2012 19:45:32 +0400 Subject: ARM: clps711x: merge all CLPS711X-defconfigs into one Signed-off-by: Alexander Shiyan Signed-off-by: Arnd Bergmann diff --git a/arch/arm/configs/clps711x_defconfig b/arch/arm/configs/clps711x_defconfig new file mode 100644 index 0000000..86209d1 --- /dev/null +++ b/arch/arm/configs/clps711x_defconfig @@ -0,0 +1,78 @@ +CONFIG_EXPERIMENTAL=y +CONFIG_SYSVIPC=y +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_BLK_DEV_INITRD=y +CONFIG_EMBEDDED=y +CONFIG_PARTITION_ADVANCED=y +# CONFIG_MSDOS_PARTITION is not set +CONFIG_ARCH_CLPS711X=y +CONFIG_ARCH_AUTCPU12=y +CONFIG_ARCH_CDB89712=y +CONFIG_ARCH_CLEP7312=y +CONFIG_ARCH_EDB7211=y +CONFIG_ARCH_P720T=y +CONFIG_ARCH_FORTUNET=y +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_NET=y +CONFIG_PACKET=y +CONFIG_UNIX=y +CONFIG_INET=y +# CONFIG_IPV6 is not set +CONFIG_IRDA=y +CONFIG_IRTTY_SIR=y +CONFIG_EP7211_DONGLE=y +CONFIG_MTD=y +CONFIG_MTD_CMDLINE_PARTS=y +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLOCK=y +CONFIG_MTD_CFI=y +CONFIG_MTD_JEDECPROBE=y +CONFIG_MTD_CFI_INTELEXT=y +CONFIG_MTD_CFI_AMDSTD=y +CONFIG_MTD_CFI_STAA=y +CONFIG_MTD_CDB89712=y +CONFIG_MTD_AUTCPU12=y +CONFIG_MTD_PLATRAM=y +CONFIG_BLK_DEV_RAM=y +CONFIG_NETDEVICES=y +# CONFIG_NET_VENDOR_3COM is not set +# CONFIG_NET_VENDOR_AMD is not set +# CONFIG_NET_VENDOR_BROADCOM is not set +# CONFIG_NET_VENDOR_CHELSIO is not set +CONFIG_CS89x0=y +# CONFIG_NET_VENDOR_FARADAY is not set +# CONFIG_NET_VENDOR_FUJITSU is not set +# CONFIG_NET_VENDOR_HP is not set +# CONFIG_NET_VENDOR_INTEL is not set +# CONFIG_NET_VENDOR_MARVELL is not set +# CONFIG_NET_VENDOR_MICREL is not set +# CONFIG_NET_VENDOR_NATSEMI is not set +# CONFIG_NET_VENDOR_RACAL is not set +# CONFIG_NET_VENDOR_SEEQ is not set +# CONFIG_NET_VENDOR_SMSC is not set +# CONFIG_NET_VENDOR_STMICRO is not set +# CONFIG_NET_VENDOR_WIZNET is not set +# CONFIG_WLAN is not set +# CONFIG_INPUT is not set +# CONFIG_SERIO is not set +# CONFIG_VT is not set +CONFIG_SERIAL_CLPS711X_CONSOLE=y +# CONFIG_HW_RANDOM is not set +# CONFIG_HWMON is not set +CONFIG_FB=y +CONFIG_FB_CLPS711X=y +# CONFIG_USB_SUPPORT is not set +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y +# CONFIG_IOMMU_SUPPORT is not set +CONFIG_EXT2_FS=y +CONFIG_MINIX_FS=y +# CONFIG_NETWORK_FILESYSTEMS is not set +# CONFIG_FTRACE is not set +CONFIG_DEBUG_USER=y +CONFIG_DEBUG_LL=y +CONFIG_EARLY_PRINTK=y +# CONFIG_CRYPTO_ANSI_CPRNG is not set +# CONFIG_CRYPTO_HW is not set +# CONFIG_CRC32 is not set diff --git a/arch/arm/configs/edb7211_defconfig b/arch/arm/configs/edb7211_defconfig deleted file mode 100644 index d52ded35..0000000 --- a/arch/arm/configs/edb7211_defconfig +++ /dev/null @@ -1,27 +0,0 @@ -CONFIG_EXPERIMENTAL=y -CONFIG_SYSVIPC=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_BLK_DEV_INITRD=y -CONFIG_EXPERT=y -# CONFIG_HOTPLUG is not set -CONFIG_ARCH_CLPS711X=y -CONFIG_ARCH_EDB7211=y -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -# CONFIG_IPV6 is not set -CONFIG_BLK_DEV_RAM=y -CONFIG_NETDEVICES=y -# CONFIG_INPUT is not set -CONFIG_SERIO_LIBPS2=y -# CONFIG_VT is not set -CONFIG_SERIAL_CLPS711X=y -CONFIG_SERIAL_CLPS711X_CONSOLE=y -CONFIG_EXT2_FS=y -CONFIG_MINIX_FS=y -CONFIG_PARTITION_ADVANCED=y -# CONFIG_MSDOS_PARTITION is not set -CONFIG_DEBUG_USER=y diff --git a/arch/arm/configs/fortunet_defconfig b/arch/arm/configs/fortunet_defconfig deleted file mode 100644 index 840fced..0000000 --- a/arch/arm/configs/fortunet_defconfig +++ /dev/null @@ -1,28 +0,0 @@ -CONFIG_EXPERIMENTAL=y -CONFIG_SYSVIPC=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_BLK_DEV_INITRD=y -CONFIG_EXPERT=y -# CONFIG_HOTPLUG is not set -CONFIG_ARCH_CLPS711X=y -CONFIG_ARCH_FORTUNET=y -# CONFIG_ARM_THUMB is not set -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_FPE_FASTFPE=y -CONFIG_BINFMT_AOUT=y -CONFIG_NET=y -CONFIG_UNIX=y -CONFIG_MTD=y -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLOCK=y -CONFIG_MTD_CFI=y -CONFIG_MTD_CFI_INTELEXT=y -CONFIG_BLK_DEV_RAM=y -# CONFIG_INPUT is not set -# CONFIG_SERIO is not set -# CONFIG_VT is not set -CONFIG_SERIAL_CLPS711X=y -CONFIG_SERIAL_CLPS711X_CONSOLE=y -CONFIG_EXT2_FS=y -CONFIG_DEBUG_USER=y -- cgit v0.10.2 From 2a5528912d15a4db760c5eb7fa3e1efdd5c87371 Mon Sep 17 00:00:00 2001 From: Alexander Shiyan Date: Wed, 10 Oct 2012 19:45:33 +0400 Subject: ARM: clps711x: merge files related to EDB7211-board into one Signed-off-by: Alexander Shiyan Signed-off-by: Arnd Bergmann diff --git a/arch/arm/mach-clps711x/Makefile b/arch/arm/mach-clps711x/Makefile index 6da6940..9cf2d1c 100644 --- a/arch/arm/mach-clps711x/Makefile +++ b/arch/arm/mach-clps711x/Makefile @@ -12,6 +12,6 @@ obj- := obj-$(CONFIG_ARCH_AUTCPU12) += autcpu12.o obj-$(CONFIG_ARCH_CDB89712) += cdb89712.o obj-$(CONFIG_ARCH_CLEP7312) += clep7312.o -obj-$(CONFIG_ARCH_EDB7211) += edb7211-arch.o edb7211-mm.o +obj-$(CONFIG_ARCH_EDB7211) += edb7211.o obj-$(CONFIG_ARCH_FORTUNET) += fortunet.o obj-$(CONFIG_ARCH_P720T) += p720t.o diff --git a/arch/arm/mach-clps711x/edb7211-arch.c b/arch/arm/mach-clps711x/edb7211-arch.c deleted file mode 100644 index 5fad0b4..0000000 --- a/arch/arm/mach-clps711x/edb7211-arch.c +++ /dev/null @@ -1,66 +0,0 @@ -/* - * linux/arch/arm/mach-clps711x/arch-edb7211.c - * - * Copyright (C) 2000, 2001 Blue Mug, Inc. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#include -#include -#include -#include - -#include -#include -#include - -#include "common.h" - -extern void edb7211_map_io(void); - -/* Reserve screen memory region at the start of main system memory. */ -static void __init edb7211_reserve(void) -{ - memblock_reserve(PHYS_OFFSET, 0x00020000); -} - -static void __init -fixup_edb7211(struct tag *tags, char **cmdline, struct meminfo *mi) -{ - /* - * Bank start addresses are not present in the information - * passed in from the boot loader. We could potentially - * detect them, but instead we hard-code them. - * - * Banks sizes _are_ present in the param block, but we're - * not using that information yet. - */ - mi->bank[0].start = 0xc0000000; - mi->bank[0].size = 8*1024*1024; - mi->bank[1].start = 0xc1000000; - mi->bank[1].size = 8*1024*1024; - mi->nr_banks = 2; -} - -MACHINE_START(EDB7211, "CL-EDB7211 (EP7211 eval board)") - /* Maintainer: Jon McClintock */ - .atag_offset = 0x20100, /* 0xc0000000 - 0xc001ffff can be video RAM */ - .fixup = fixup_edb7211, - .map_io = edb7211_map_io, - .reserve = edb7211_reserve, - .init_irq = clps711x_init_irq, - .timer = &clps711x_timer, - .restart = clps711x_restart, -MACHINE_END diff --git a/arch/arm/mach-clps711x/edb7211-mm.c b/arch/arm/mach-clps711x/edb7211-mm.c deleted file mode 100644 index 054eaa0..0000000 --- a/arch/arm/mach-clps711x/edb7211-mm.c +++ /dev/null @@ -1,82 +0,0 @@ -/* - * linux/arch/arm/mach-clps711x/mm.c - * - * Extra MM routines for the EDB7211 board - * - * Copyright (C) 2000, 2001 Blue Mug, Inc. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#include -#include -#include - -#include -#include -#include - -#include - -extern void clps711x_map_io(void); - -/* - * The on-chip registers are given a size of 1MB so that a section can - * be used to map them; this saves a page table. This is the place to - * add mappings for ROM, expansion memory, PCMCIA, etc. (if static - * mappings are chosen for those areas). - * - * Here is a physical memory map (to be fleshed out later): - * - * Physical Address Size Description - * ----------------- ----- --------------------------------- - * c0000000-c001ffff 128KB reserved for video RAM [1] - * c0020000-c0023fff 16KB parameters (see Documentation/arm/Setup) - * c0024000-c0027fff 16KB swapper_pg_dir (task 0 page directory) - * c0028000-... kernel image (TEXTADDR) - * - * [1] Unused pages should be given back to the VM; they are not yet. - * The parameter block should also be released (not sure if this - * happens). - */ -static struct map_desc edb7211_io_desc[] __initdata = { - { /* Memory-mapped extra keyboard row */ - .virtual = IO_ADDRESS(EP7211_PHYS_EXTKBD), - .pfn = __phys_to_pfn(EP7211_PHYS_EXTKBD), - .length = SZ_1M, - .type = MT_DEVICE, - }, { /* CS8900A Ethernet chip */ - .virtual = IO_ADDRESS(EP7211_PHYS_CS8900A), - .pfn = __phys_to_pfn(EP7211_PHYS_CS8900A), - .length = SZ_1M, - .type = MT_DEVICE, - }, { /* Flash bank 0 */ - .virtual = IO_ADDRESS(EP7211_PHYS_FLASH1), - .pfn = __phys_to_pfn(EP7211_PHYS_FLASH1), - .length = SZ_8M, - .type = MT_DEVICE, - }, { /* Flash bank 1 */ - .virtual = IO_ADDRESS(EP7211_PHYS_FLASH2), - .pfn = __phys_to_pfn(EP7211_PHYS_FLASH2), - .length = SZ_8M, - .type = MT_DEVICE, - } -}; - -void __init edb7211_map_io(void) -{ - clps711x_map_io(); - iotable_init(edb7211_io_desc, ARRAY_SIZE(edb7211_io_desc)); -} - diff --git a/arch/arm/mach-clps711x/edb7211.c b/arch/arm/mach-clps711x/edb7211.c new file mode 100644 index 0000000..88f4690 --- /dev/null +++ b/arch/arm/mach-clps711x/edb7211.c @@ -0,0 +1,88 @@ +/* + * Copyright (C) 2000, 2001 Blue Mug, Inc. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include +#include +#include + +#include +#include +#include +#include + +#include + +#include "common.h" + +#define VIDEORAM_SIZE SZ_128K + +static struct map_desc edb7211_io_desc[] __initdata = { + { /* Memory-mapped extra keyboard row */ + .virtual = IO_ADDRESS(EP7211_PHYS_EXTKBD), + .pfn = __phys_to_pfn(EP7211_PHYS_EXTKBD), + .length = SZ_1M, + .type = MT_DEVICE, + }, { /* CS8900A Ethernet chip */ + .virtual = IO_ADDRESS(EP7211_PHYS_CS8900A), + .pfn = __phys_to_pfn(EP7211_PHYS_CS8900A), + .length = SZ_1M, + .type = MT_DEVICE, + }, { /* Flash bank 0 */ + .virtual = IO_ADDRESS(EP7211_PHYS_FLASH1), + .pfn = __phys_to_pfn(EP7211_PHYS_FLASH1), + .length = SZ_8M, + .type = MT_DEVICE, + }, { /* Flash bank 1 */ + .virtual = IO_ADDRESS(EP7211_PHYS_FLASH2), + .pfn = __phys_to_pfn(EP7211_PHYS_FLASH2), + .length = SZ_8M, + .type = MT_DEVICE, + }, +}; + +void __init edb7211_map_io(void) +{ + clps711x_map_io(); + iotable_init(edb7211_io_desc, ARRAY_SIZE(edb7211_io_desc)); +} + +/* Reserve screen memory region at the start of main system memory. */ +static void __init edb7211_reserve(void) +{ + memblock_reserve(PHYS_OFFSET, VIDEORAM_SIZE); +} + +static void __init +fixup_edb7211(struct tag *tags, char **cmdline, struct meminfo *mi) +{ + /* + * Bank start addresses are not present in the information + * passed in from the boot loader. We could potentially + * detect them, but instead we hard-code them. + * + * Banks sizes _are_ present in the param block, but we're + * not using that information yet. + */ + mi->bank[0].start = 0xc0000000; + mi->bank[0].size = SZ_8M; + mi->bank[1].start = 0xc1000000; + mi->bank[1].size = SZ_8M; + mi->nr_banks = 2; +} + +MACHINE_START(EDB7211, "CL-EDB7211 (EP7211 eval board)") + /* Maintainer: Jon McClintock */ + .atag_offset = VIDEORAM_SIZE + 0x100, + .fixup = fixup_edb7211, + .map_io = edb7211_map_io, + .reserve = edb7211_reserve, + .init_irq = clps711x_init_irq, + .timer = &clps711x_timer, + .restart = clps711x_restart, +MACHINE_END -- cgit v0.10.2 From d0f1c7ffaa32bdda2d413d2db41c51bbdd105834 Mon Sep 17 00:00:00 2001 From: Stephen Warren Date: Sat, 15 Sep 2012 22:18:10 -0600 Subject: ARM: bcm2835: implement machine restart hook Implement the machine restart hook using the SoC's watchdog timer module. To support this, define a DT binding for the watchdog module, and add it to the device tree. The downstream rpi-split branch contains a full watchdog timer driver implementation, which also implements the restart hook. However, the restart function is largely separate from the watchdog driver, so for simplicity, the restart hook is implemented here directly in the main machine source file. Overall structure (separate setup/restart) functions derived from the picoxcell ARM support. Watchdog register IO sequence taken from code by Simon Arlott. Note that the watchdog module is not documented in BCM2835-ARM-Peripherals.pdf. Signed-off-by: Stephen Warren diff --git a/Documentation/devicetree/bindings/watchdog/brcm,bcm2835-pm-wdog.txt b/Documentation/devicetree/bindings/watchdog/brcm,bcm2835-pm-wdog.txt new file mode 100644 index 0000000..d209366 --- /dev/null +++ b/Documentation/devicetree/bindings/watchdog/brcm,bcm2835-pm-wdog.txt @@ -0,0 +1,13 @@ +BCM2835 Watchdog timer + +Required properties: + +- compatible : should be "brcm,bcm2835-pm-wdt" +- reg : Specifies base physical address and size of the registers. + +Example: + +watchdog { + compatible = "brcm,bcm2835-pm-wdt"; + reg = <0x7e100000 0x28>; +}; diff --git a/arch/arm/boot/dts/bcm2835.dtsi b/arch/arm/boot/dts/bcm2835.dtsi index 0b61939..5c5cbaf 100644 --- a/arch/arm/boot/dts/bcm2835.dtsi +++ b/arch/arm/boot/dts/bcm2835.dtsi @@ -29,6 +29,11 @@ #interrupt-cells = <2>; }; + watchdog { + compatible = "brcm,bcm2835-pm-wdt"; + reg = <0x7e100000 0x28>; + }; + uart@20201000 { compatible = "brcm,bcm2835-pl011", "arm,pl011", "arm,primecell"; reg = <0x7e201000 0x1000>; diff --git a/arch/arm/mach-bcm2835/bcm2835.c b/arch/arm/mach-bcm2835/bcm2835.c index f6fea49..c4dd210 100644 --- a/arch/arm/mach-bcm2835/bcm2835.c +++ b/arch/arm/mach-bcm2835/bcm2835.c @@ -12,8 +12,10 @@ * GNU General Public License for more details. */ +#include #include #include +#include #include #include #include @@ -23,6 +25,48 @@ #include +#define PM_RSTC 0x1c +#define PM_WDOG 0x24 + +#define PM_PASSWORD 0x5a000000 +#define PM_RSTC_WRCFG_MASK 0x00000030 +#define PM_RSTC_WRCFG_FULL_RESET 0x00000020 + +static void __iomem *wdt_regs; + +/* + * The machine restart method can be called from an atomic context so we won't + * be able to ioremap the regs then. + */ +static void bcm2835_setup_restart(void) +{ + struct device_node *np = of_find_compatible_node(NULL, NULL, + "brcm,bcm2835-pm-wdt"); + if (WARN(!np, "unable to setup watchdog restart")) + return; + + wdt_regs = of_iomap(np, 0); + WARN(!wdt_regs, "failed to remap watchdog regs"); +} + +static void bcm2835_restart(char mode, const char *cmd) +{ + u32 val; + + if (!wdt_regs) + return; + + /* use a timeout of 10 ticks (~150us) */ + writel_relaxed(10 | PM_PASSWORD, wdt_regs + PM_WDOG); + val = readl_relaxed(wdt_regs + PM_RSTC); + val &= ~PM_RSTC_WRCFG_MASK; + val |= PM_PASSWORD | PM_RSTC_WRCFG_FULL_RESET; + writel_relaxed(val, wdt_regs + PM_RSTC); + + /* No sleeping, possibly atomic. */ + mdelay(1); +} + static struct map_desc io_map __initdata = { .virtual = BCM2835_PERIPH_VIRT, .pfn = __phys_to_pfn(BCM2835_PERIPH_PHYS), @@ -39,6 +83,7 @@ void __init bcm2835_init(void) { int ret; + bcm2835_setup_restart(); bcm2835_init_clocks(); ret = of_platform_populate(NULL, of_default_bus_match_table, NULL, @@ -60,5 +105,6 @@ DT_MACHINE_START(BCM2835, "BCM2835") .handle_irq = bcm2835_handle_irq, .init_machine = bcm2835_init, .timer = &bcm2835_timer, + .restart = bcm2835_restart, .dt_compat = bcm2835_compat MACHINE_END -- cgit v0.10.2 From 805504abdc73cfc745a5fee3d616cdb24bb2a68c Mon Sep 17 00:00:00 2001 From: Stephen Warren Date: Thu, 27 Sep 2012 21:54:21 -0600 Subject: ARM: bcm2835: enable GPIO/pinctrl Enable GPIO and pinctrl in Kconfig. Add required for gpiolib. Instantiate the BCM2835 GPIO module in bcm2835.dtsi. Add a pinctrl definition to bcm2835-rpi-b.dts that sets up all of the board's required pinmux configuration. GPIO aren't specified; that's left to gpio_request(). Signed-off-by: Stephen Warren Acked-by: Linus Walleij diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 73067ef..7cce11a 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -336,7 +336,7 @@ config ARCH_AT91 config ARCH_BCM2835 bool "Broadcom BCM2835 family" - select ARCH_WANT_OPTIONAL_GPIOLIB + select ARCH_REQUIRE_GPIOLIB select ARM_AMBA select ARM_ERRATA_411920 select ARM_TIMER_SP804 @@ -344,7 +344,10 @@ config ARCH_BCM2835 select COMMON_CLK select CPU_V6 select GENERIC_CLOCKEVENTS + select GENERIC_GPIO select MULTI_IRQ_HANDLER + select PINCTRL + select PINCTRL_BCM2835 select SPARSE_IRQ select USE_OF help diff --git a/arch/arm/boot/dts/bcm2835-rpi-b.dts b/arch/arm/boot/dts/bcm2835-rpi-b.dts index 7dd860f..9b72054 100644 --- a/arch/arm/boot/dts/bcm2835-rpi-b.dts +++ b/arch/arm/boot/dts/bcm2835-rpi-b.dts @@ -10,3 +10,18 @@ reg = <0 0x10000000>; }; }; + +&gpio { + pinctrl-names = "default"; + pinctrl-0 = <&alt0 &alt3>; + + alt0: alt0 { + brcm,pins = <0 1 2 3 4 5 6 7 8 9 10 11 14 15 40 45>; + brcm,function = <4>; /* alt0 */ + }; + + alt3: alt3 { + brcm,pins = <48 49 50 51 52 53>; + brcm,function = <7>; /* alt3 */ + }; +}; diff --git a/arch/arm/boot/dts/bcm2835.dtsi b/arch/arm/boot/dts/bcm2835.dtsi index 5c5cbaf..8917550 100644 --- a/arch/arm/boot/dts/bcm2835.dtsi +++ b/arch/arm/boot/dts/bcm2835.dtsi @@ -40,5 +40,28 @@ interrupts = <2 25>; clock-frequency = <3000000>; }; + + gpio: gpio { + compatible = "brcm,bcm2835-gpio"; + reg = <0x7e200000 0xb4>; + /* + * The GPIO IP block is designed for 3 banks of GPIOs. + * Each bank has a GPIO interrupt for itself. + * There is an overall "any bank" interrupt. + * In order, these are GIC interrupts 17, 18, 19, 20. + * Since the BCM2835 only has 2 banks, the 2nd bank + * interrupt output appears to be mirrored onto the + * 3rd bank's interrupt signal. + * So, a bank0 interrupt shows up on 17, 20, and + * a bank1 interrupt shows up on 18, 19, 20! + */ + interrupts = <2 17>, <2 18>, <2 19>, <2 20>; + + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; }; }; diff --git a/arch/arm/mach-bcm2835/include/mach/gpio.h b/arch/arm/mach-bcm2835/include/mach/gpio.h new file mode 100644 index 0000000..40a8c17 --- /dev/null +++ b/arch/arm/mach-bcm2835/include/mach/gpio.h @@ -0,0 +1 @@ +/* empty */ -- cgit v0.10.2 From 3a6ca8c5c9e310d26fe090ac7c777c269661f0e6 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Sat, 27 Oct 2012 01:05:06 +0200 Subject: ARM: plat-versatile: use simple irqdomain for FPGA IRQ This switches the FPGA IRQ driver over to using the simple IRQ domain. We can then use the same codepath for this in the DT and non-DT cases. To be able to use quicker irq_find_mapping() in the handlers we first call irq_create_mapping() on all the valid HW IRQ numbers so that descriptors will be created for them in the DT case where a linear domain will be the outcome of the call. Signed-off-by: Linus Walleij diff --git a/arch/arm/plat-versatile/fpga-irq.c b/arch/arm/plat-versatile/fpga-irq.c index 091ae10..dfe317c 100644 --- a/arch/arm/plat-versatile/fpga-irq.c +++ b/arch/arm/plat-versatile/fpga-irq.c @@ -1,6 +1,7 @@ /* * Support for Versatile FPGA-based IRQ controllers */ +#include #include #include #include @@ -117,13 +118,12 @@ static int fpga_irqdomain_map(struct irq_domain *d, unsigned int irq, struct fpga_irq_data *f = d->host_data; /* Skip invalid IRQs, only register handlers for the real ones */ - if (!(f->valid & (1 << hwirq))) + if (!(f->valid & BIT(hwirq))) return -ENOTSUPP; irq_set_chip_data(irq, f); irq_set_chip_and_handler(irq, &f->chip, handle_level_irq); set_irq_flags(irq, IRQF_VALID | IRQF_PROBE); - f->used_irqs++; return 0; } @@ -132,13 +132,15 @@ static struct irq_domain_ops fpga_irqdomain_ops = { .xlate = irq_domain_xlate_onetwocell, }; -static __init struct fpga_irq_data * -fpga_irq_prep_struct(void __iomem *base, const char *name, u32 valid) { +void __init fpga_irq_init(void __iomem *base, const char *name, int irq_start, + int parent_irq, u32 valid, struct device_node *node) +{ struct fpga_irq_data *f; + int i; if (fpga_irq_id >= ARRAY_SIZE(fpga_irq_devices)) { - printk(KERN_ERR "%s: too few FPGA IRQ controllers, increase CONFIG_PLAT_VERSATILE_FPGA_IRQ_NR\n", __func__); - return NULL; + pr_err("%s: too few FPGA IRQ controllers, increase CONFIG_PLAT_VERSATILE_FPGA_IRQ_NR\n", __func__); + return; } f = &fpga_irq_devices[fpga_irq_id]; f->base = base; @@ -147,29 +149,28 @@ fpga_irq_prep_struct(void __iomem *base, const char *name, u32 valid) { f->chip.irq_mask = fpga_irq_mask; f->chip.irq_unmask = fpga_irq_unmask; f->valid = valid; - fpga_irq_id++; - - return f; -} - -void __init fpga_irq_init(void __iomem *base, const char *name, int irq_start, - int parent_irq, u32 valid, struct device_node *node) -{ - struct fpga_irq_data *f; - - f = fpga_irq_prep_struct(base, name, valid); - if (!f) - return; if (parent_irq != -1) { irq_set_handler_data(parent_irq, f); irq_set_chained_handler(parent_irq, fpga_irq_handle); } - f->domain = irq_domain_add_legacy(node, fls(valid), irq_start, 0, + /* This will also allocate irq descriptors */ + f->domain = irq_domain_add_simple(node, fls(valid), irq_start, &fpga_irqdomain_ops, f); + + /* This will allocate all valid descriptors in the linear case */ + for (i = 0; i < fls(valid); i++) + if (valid & BIT(i)) { + if (!irq_start) + irq_create_mapping(f->domain, i); + f->used_irqs++; + } + pr_info("FPGA IRQ chip %d \"%s\" @ %p, %u irqs\n", fpga_irq_id, name, base, f->used_irqs); + + fpga_irq_id++; } #ifdef CONFIG_OF @@ -193,18 +194,11 @@ int __init fpga_irq_of_init(struct device_node *node, if (of_property_read_u32(node, "valid-mask", &valid_mask)) valid_mask = 0; - f = fpga_irq_prep_struct(base, node->name, valid_mask); - if (!f) - return -ENOMEM; + fpga_irq_init(base, node->name, 0, -1, valid_mask, node); writel(clear_mask, base + IRQ_ENABLE_CLEAR); writel(clear_mask, base + FIQ_ENABLE_CLEAR); - f->domain = irq_domain_add_linear(node, fls(valid_mask), &fpga_irqdomain_ops, f); - f->used_irqs = hweight32(valid_mask); - - pr_info("FPGA IRQ chip %d \"%s\" @ %p, %u irqs\n", - fpga_irq_id, node->name, base, f->used_irqs); return 0; } #endif -- cgit v0.10.2 From da72a66ba852fef3d5dfe02ab311a894e7d791e9 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Sat, 27 Oct 2012 01:24:29 +0200 Subject: ARM: integrator: get rid of preallocated irq descriptors The Integrators were using the .nr_irqs field of the machine descriptor to pre-allocate a number of descriptors at boot. This is not right: the irq chip implementations should allocate their descriptors themselves, and as a result the simple irqdomain code warns about it. Get rid of this by just deleting the .nr_irq field from the machine descriptors but take care: doing so makes the default implementation hog the first 16 IRQ numbers, so these cannot be used by the still static IRQ number assignments in the ATAG boot case. So for these, bump the IRQ numbers to begin at 64 and upward. Introduce an offset to offset all IRQ numbers if need be, though we don't expect to do that again as device tree comes along. Signed-off-by: Linus Walleij diff --git a/arch/arm/mach-integrator/include/mach/irqs.h b/arch/arm/mach-integrator/include/mach/irqs.h index 7371018..eff0ada 100644 --- a/arch/arm/mach-integrator/include/mach/irqs.h +++ b/arch/arm/mach-integrator/include/mach/irqs.h @@ -19,64 +19,63 @@ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ -/* - * Interrupt numbers +/* + * Interrupt numbers, all of the above are just static reservations + * used so they can be encoded into device resources. They will finally + * be done away with when switching to device tree. */ -#define IRQ_PIC_START 1 -#define IRQ_SOFTINT 1 -#define IRQ_UARTINT0 2 -#define IRQ_UARTINT1 3 -#define IRQ_KMIINT0 4 -#define IRQ_KMIINT1 5 -#define IRQ_TIMERINT0 6 -#define IRQ_TIMERINT1 7 -#define IRQ_TIMERINT2 8 -#define IRQ_RTCINT 9 -#define IRQ_AP_EXPINT0 10 -#define IRQ_AP_EXPINT1 11 -#define IRQ_AP_EXPINT2 12 -#define IRQ_AP_EXPINT3 13 -#define IRQ_AP_PCIINT0 14 -#define IRQ_AP_PCIINT1 15 -#define IRQ_AP_PCIINT2 16 -#define IRQ_AP_PCIINT3 17 -#define IRQ_AP_V3INT 18 -#define IRQ_AP_CPINT0 19 -#define IRQ_AP_CPINT1 20 -#define IRQ_AP_LBUSTIMEOUT 21 -#define IRQ_AP_APCINT 22 -#define IRQ_CP_CLCDCINT 23 -#define IRQ_CP_MMCIINT0 24 -#define IRQ_CP_MMCIINT1 25 -#define IRQ_CP_AACIINT 26 -#define IRQ_CP_CPPLDINT 27 -#define IRQ_CP_ETHINT 28 -#define IRQ_CP_TSPENINT 29 -#define IRQ_PIC_END 29 +#define IRQ_PIC_START 64 +#define IRQ_SOFTINT (IRQ_PIC_START+0) +#define IRQ_UARTINT0 (IRQ_PIC_START+1) +#define IRQ_UARTINT1 (IRQ_PIC_START+2) +#define IRQ_KMIINT0 (IRQ_PIC_START+3) +#define IRQ_KMIINT1 (IRQ_PIC_START+4) +#define IRQ_TIMERINT0 (IRQ_PIC_START+5) +#define IRQ_TIMERINT1 (IRQ_PIC_START+6) +#define IRQ_TIMERINT2 (IRQ_PIC_START+7) +#define IRQ_RTCINT (IRQ_PIC_START+8) +#define IRQ_AP_EXPINT0 (IRQ_PIC_START+9) +#define IRQ_AP_EXPINT1 (IRQ_PIC_START+10) +#define IRQ_AP_EXPINT2 (IRQ_PIC_START+11) +#define IRQ_AP_EXPINT3 (IRQ_PIC_START+12) +#define IRQ_AP_PCIINT0 (IRQ_PIC_START+13) +#define IRQ_AP_PCIINT1 (IRQ_PIC_START+14) +#define IRQ_AP_PCIINT2 (IRQ_PIC_START+15) +#define IRQ_AP_PCIINT3 (IRQ_PIC_START+16) +#define IRQ_AP_V3INT (IRQ_PIC_START+17) +#define IRQ_AP_CPINT0 (IRQ_PIC_START+18) +#define IRQ_AP_CPINT1 (IRQ_PIC_START+19) +#define IRQ_AP_LBUSTIMEOUT (IRQ_PIC_START+20) +#define IRQ_AP_APCINT (IRQ_PIC_START+21) +#define IRQ_CP_CLCDCINT (IRQ_PIC_START+22) +#define IRQ_CP_MMCIINT0 (IRQ_PIC_START+23) +#define IRQ_CP_MMCIINT1 (IRQ_PIC_START+24) +#define IRQ_CP_AACIINT (IRQ_PIC_START+25) +#define IRQ_CP_CPPLDINT (IRQ_PIC_START+26) +#define IRQ_CP_ETHINT (IRQ_PIC_START+27) +#define IRQ_CP_TSPENINT (IRQ_PIC_START+28) +#define IRQ_PIC_END (IRQ_PIC_START+28) -#define IRQ_CIC_START 32 -#define IRQ_CM_SOFTINT 32 -#define IRQ_CM_COMMRX 33 -#define IRQ_CM_COMMTX 34 -#define IRQ_CIC_END 34 +#define IRQ_CIC_START (IRQ_PIC_END+1) +#define IRQ_CM_SOFTINT (IRQ_CIC_START+0) +#define IRQ_CM_COMMRX (IRQ_CIC_START+1) +#define IRQ_CM_COMMTX (IRQ_CIC_START+2) +#define IRQ_CIC_END (IRQ_CIC_START+2) /* * IntegratorCP only */ -#define IRQ_SIC_START 35 -#define IRQ_SIC_CP_SOFTINT 35 -#define IRQ_SIC_CP_RI0 36 -#define IRQ_SIC_CP_RI1 37 -#define IRQ_SIC_CP_CARDIN 38 -#define IRQ_SIC_CP_LMINT0 39 -#define IRQ_SIC_CP_LMINT1 40 -#define IRQ_SIC_CP_LMINT2 41 -#define IRQ_SIC_CP_LMINT3 42 -#define IRQ_SIC_CP_LMINT4 43 -#define IRQ_SIC_CP_LMINT5 44 -#define IRQ_SIC_CP_LMINT6 45 -#define IRQ_SIC_CP_LMINT7 46 -#define IRQ_SIC_END 46 - -#define NR_IRQS_INTEGRATOR_AP 34 -#define NR_IRQS_INTEGRATOR_CP 47 +#define IRQ_SIC_START (IRQ_CIC_END+1) +#define IRQ_SIC_CP_SOFTINT (IRQ_SIC_START+0) +#define IRQ_SIC_CP_RI0 (IRQ_SIC_START+1) +#define IRQ_SIC_CP_RI1 (IRQ_SIC_START+2) +#define IRQ_SIC_CP_CARDIN (IRQ_SIC_START+3) +#define IRQ_SIC_CP_LMINT0 (IRQ_SIC_START+4) +#define IRQ_SIC_CP_LMINT1 (IRQ_SIC_START+5) +#define IRQ_SIC_CP_LMINT2 (IRQ_SIC_START+6) +#define IRQ_SIC_CP_LMINT3 (IRQ_SIC_START+7) +#define IRQ_SIC_CP_LMINT4 (IRQ_SIC_START+8) +#define IRQ_SIC_CP_LMINT5 (IRQ_SIC_START+9) +#define IRQ_SIC_CP_LMINT6 (IRQ_SIC_START+10) +#define IRQ_SIC_CP_LMINT7 (IRQ_SIC_START+11) +#define IRQ_SIC_END (IRQ_SIC_START+11) diff --git a/arch/arm/mach-integrator/integrator_ap.c b/arch/arm/mach-integrator/integrator_ap.c index e6617c1..4f13bc5 100644 --- a/arch/arm/mach-integrator/integrator_ap.c +++ b/arch/arm/mach-integrator/integrator_ap.c @@ -499,7 +499,6 @@ static const char * ap_dt_board_compat[] = { DT_MACHINE_START(INTEGRATOR_AP_DT, "ARM Integrator/AP (Device Tree)") .reserve = integrator_reserve, .map_io = ap_map_io, - .nr_irqs = NR_IRQS_INTEGRATOR_AP, .init_early = ap_init_early, .init_irq = ap_init_irq_of, .handle_irq = fpga_handle_irq, @@ -609,7 +608,6 @@ MACHINE_START(INTEGRATOR, "ARM-Integrator") .atag_offset = 0x100, .reserve = integrator_reserve, .map_io = ap_map_io, - .nr_irqs = NR_IRQS_INTEGRATOR_AP, .init_early = ap_init_early, .init_irq = ap_init_irq, .handle_irq = fpga_handle_irq, diff --git a/arch/arm/mach-integrator/integrator_cp.c b/arch/arm/mach-integrator/integrator_cp.c index 5b08e8e..4423bc8 100644 --- a/arch/arm/mach-integrator/integrator_cp.c +++ b/arch/arm/mach-integrator/integrator_cp.c @@ -350,7 +350,6 @@ static const char * intcp_dt_board_compat[] = { DT_MACHINE_START(INTEGRATOR_CP_DT, "ARM Integrator/CP (Device Tree)") .reserve = integrator_reserve, .map_io = intcp_map_io, - .nr_irqs = NR_IRQS_INTEGRATOR_CP, .init_early = intcp_init_early, .init_irq = intcp_init_irq_of, .handle_irq = fpga_handle_irq, @@ -423,7 +422,7 @@ static void __init intcp_init_irq(void) u32 pic_mask, cic_mask, sic_mask; /* These masks are for the HW IRQ registers */ - pic_mask = ~((~0u) << (11 - IRQ_PIC_START)); + pic_mask = ~((~0u) << (11 - 0)); pic_mask |= (~((~0u) << (29 - 22))) << 22; cic_mask = ~((~0u) << (1 + IRQ_CIC_END - IRQ_CIC_START)); sic_mask = ~((~0u) << (1 + IRQ_SIC_END - IRQ_SIC_START)); @@ -504,7 +503,6 @@ MACHINE_START(CINTEGRATOR, "ARM-IntegratorCP") .atag_offset = 0x100, .reserve = integrator_reserve, .map_io = intcp_map_io, - .nr_irqs = NR_IRQS_INTEGRATOR_CP, .init_early = intcp_init_early, .init_irq = intcp_init_irq, .handle_irq = fpga_handle_irq, -- cgit v0.10.2 From 76d57ce6ef6060f611c14675249b7300a3c96368 Mon Sep 17 00:00:00 2001 From: Sekhar Nori Date: Wed, 29 Aug 2012 22:48:52 +0530 Subject: ARM: davinci: serial: provide API to initialze UART clocks Provide an API to initialize a UART clock. Refactor existing davinci_serial_init() to separate out the part which enables the clock. This will later be used to help DA850 DT boot support. Signed-off-by: Sekhar Nori diff --git a/arch/arm/mach-davinci/include/mach/serial.h b/arch/arm/mach-davinci/include/mach/serial.h index 46b3cd1..2d9d921 100644 --- a/arch/arm/mach-davinci/include/mach/serial.h +++ b/arch/arm/mach-davinci/include/mach/serial.h @@ -43,6 +43,7 @@ struct davinci_uart_config { }; extern int davinci_serial_init(struct davinci_uart_config *); +extern int davinci_serial_setup_clk(unsigned instance, unsigned int *rate); #endif #endif /* __ASM_ARCH_SERIAL_H */ diff --git a/arch/arm/mach-davinci/serial.c b/arch/arm/mach-davinci/serial.c index 24ddb0d..f262581 100644 --- a/arch/arm/mach-davinci/serial.c +++ b/arch/arm/mach-davinci/serial.c @@ -70,11 +70,33 @@ static void __init davinci_serial_reset(struct plat_serial8250_port *p) UART_DM646X_SCR_TX_WATERMARK); } -int __init davinci_serial_init(struct davinci_uart_config *info) +/* Enable UART clock and obtain its rate */ +int __init davinci_serial_setup_clk(unsigned instance, unsigned int *rate) { - int i; char name[16]; - struct clk *uart_clk; + struct clk *clk; + struct davinci_soc_info *soc_info = &davinci_soc_info; + struct device *dev = &soc_info->serial_dev->dev; + + sprintf(name, "uart%d", instance); + clk = clk_get(dev, name); + if (IS_ERR(clk)) { + pr_err("%s:%d: failed to get UART%d clock\n", + __func__, __LINE__, instance); + return PTR_ERR(clk); + } + + clk_prepare_enable(clk); + + if (rate) + *rate = clk_get_rate(clk); + + return 0; +} + +int __init davinci_serial_init(struct davinci_uart_config *info) +{ + int i, ret; struct davinci_soc_info *soc_info = &davinci_soc_info; struct device *dev = &soc_info->serial_dev->dev; struct plat_serial8250_port *p = dev->platform_data; @@ -87,16 +109,9 @@ int __init davinci_serial_init(struct davinci_uart_config *info) if (!(info->enabled_uarts & (1 << i))) continue; - sprintf(name, "uart%d", i); - uart_clk = clk_get(dev, name); - if (IS_ERR(uart_clk)) { - printk(KERN_ERR "%s:%d: failed to get UART%d clock\n", - __func__, __LINE__, i); + ret = davinci_serial_setup_clk(i, &p->uartclk); + if (ret) continue; - } - - clk_prepare_enable(uart_clk); - p->uartclk = clk_get_rate(uart_clk); if (!p->membase && p->mapbase) { p->membase = ioremap(p->mapbase, SZ_4K); -- cgit v0.10.2 From 2eb2478d471e45e1d0c8bb3defbf82bf7204e13d Mon Sep 17 00:00:00 2001 From: Matt Porter Date: Fri, 5 Oct 2012 13:04:40 -0400 Subject: uio: uio_pruss: replace private SRAM API with genalloc Remove the use of the private DaVinci SRAM API in favor of genalloc. The pool to be used is provided by platform data. Signed-off-by: Matt Porter Signed-off-by: "Hans J. Koch" Signed-off-by: Sekhar Nori diff --git a/drivers/uio/Kconfig b/drivers/uio/Kconfig index 6f3ea9b..c48b938 100644 --- a/drivers/uio/Kconfig +++ b/drivers/uio/Kconfig @@ -97,6 +97,7 @@ config UIO_NETX config UIO_PRUSS tristate "Texas Instruments PRUSS driver" depends on ARCH_DAVINCI_DA850 + select GENERIC_ALLOCATOR help PRUSS driver for OMAPL138/DA850/AM18XX devices PRUSS driver requires user space components, examples and user space diff --git a/drivers/uio/uio_pruss.c b/drivers/uio/uio_pruss.c index 33a7a27..f8738de 100644 --- a/drivers/uio/uio_pruss.c +++ b/drivers/uio/uio_pruss.c @@ -25,7 +25,7 @@ #include #include #include -#include +#include #define DRV_NAME "pruss_uio" #define DRV_VERSION "1.0" @@ -65,10 +65,11 @@ struct uio_pruss_dev { dma_addr_t sram_paddr; dma_addr_t ddr_paddr; void __iomem *prussio_vaddr; - void *sram_vaddr; + unsigned long sram_vaddr; void *ddr_vaddr; unsigned int hostirq_start; unsigned int pintc_base; + struct gen_pool *sram_pool; }; static irqreturn_t pruss_handler(int irq, struct uio_info *info) @@ -106,7 +107,9 @@ static void pruss_cleanup(struct platform_device *dev, gdev->ddr_paddr); } if (gdev->sram_vaddr) - sram_free(gdev->sram_vaddr, sram_pool_sz); + gen_pool_free(gdev->sram_pool, + gdev->sram_vaddr, + sram_pool_sz); kfree(gdev->info); clk_put(gdev->pruss_clk); kfree(gdev); @@ -152,10 +155,17 @@ static int __devinit pruss_probe(struct platform_device *dev) goto out_free; } - gdev->sram_vaddr = sram_alloc(sram_pool_sz, &(gdev->sram_paddr)); - if (!gdev->sram_vaddr) { - dev_err(&dev->dev, "Could not allocate SRAM pool\n"); - goto out_free; + if (pdata->sram_pool) { + gdev->sram_pool = pdata->sram_pool; + gdev->sram_vaddr = + gen_pool_alloc(gdev->sram_pool, sram_pool_sz); + if (!gdev->sram_vaddr) { + dev_err(&dev->dev, "Could not allocate SRAM pool\n"); + goto out_free; + } + gdev->sram_paddr = + gen_pool_virt_to_phys(gdev->sram_pool, + gdev->sram_vaddr); } gdev->ddr_vaddr = dma_alloc_coherent(&dev->dev, extram_pool_sz, diff --git a/include/linux/platform_data/uio_pruss.h b/include/linux/platform_data/uio_pruss.h index f39140a..3d47d21 100644 --- a/include/linux/platform_data/uio_pruss.h +++ b/include/linux/platform_data/uio_pruss.h @@ -20,6 +20,7 @@ /* To configure the PRUSS INTC base offset for UIO driver */ struct uio_pruss_pdata { - u32 pintc_base; + u32 pintc_base; + struct gen_pool *sram_pool; }; #endif /* _UIO_PRUSS_H_ */ -- cgit v0.10.2 From 626863a3f32f0baaf55a1d18b8d4fbb937700dda Mon Sep 17 00:00:00 2001 From: Ben Gardiner Date: Fri, 5 Oct 2012 13:04:41 -0400 Subject: ARM: davinci: sram: switch from iotable to ioremapped regions The current davinci init sets up SRAM in iotables. There has been an observed failure to boot a da850 with 128K specified in the iotable. Make the davinci sram allocator do an ioremap of the region specified by the entries in davinci_soc_info before registering with gen_pool_add_virt(). Remove all iotable SRAM mappings and SRAM_VIRT. Regression tested suspend/resume on AM180x EVM. Signed-off-by: Ben Gardiner Signed-off-by: Matt Porter Signed-off-by: Sekhar Nori diff --git a/arch/arm/mach-davinci/da850.c b/arch/arm/mach-davinci/da850.c index b90c172..ffc84f5 100644 --- a/arch/arm/mach-davinci/da850.c +++ b/arch/arm/mach-davinci/da850.c @@ -781,12 +781,6 @@ static struct map_desc da850_io_desc[] = { .length = DA8XX_CP_INTC_SIZE, .type = MT_DEVICE }, - { - .virtual = SRAM_VIRT, - .pfn = __phys_to_pfn(DA8XX_ARM_RAM_BASE), - .length = SZ_8K, - .type = MT_DEVICE - }, }; static u32 da850_psc_bases[] = { DA8XX_PSC0_BASE, DA8XX_PSC1_BASE }; diff --git a/arch/arm/mach-davinci/dm355.c b/arch/arm/mach-davinci/dm355.c index a255434..b49c3b7 100644 --- a/arch/arm/mach-davinci/dm355.c +++ b/arch/arm/mach-davinci/dm355.c @@ -758,12 +758,6 @@ static struct map_desc dm355_io_desc[] = { .length = IO_SIZE, .type = MT_DEVICE }, - { - .virtual = SRAM_VIRT, - .pfn = __phys_to_pfn(0x00010000), - .length = SZ_32K, - .type = MT_MEMORY_NONCACHED, - }, }; /* Contents of JTAG ID register used to identify exact cpu type */ diff --git a/arch/arm/mach-davinci/dm365.c b/arch/arm/mach-davinci/dm365.c index b680c83..6c39805 100644 --- a/arch/arm/mach-davinci/dm365.c +++ b/arch/arm/mach-davinci/dm365.c @@ -985,12 +985,6 @@ static struct map_desc dm365_io_desc[] = { .length = IO_SIZE, .type = MT_DEVICE }, - { - .virtual = SRAM_VIRT, - .pfn = __phys_to_pfn(0x00010000), - .length = SZ_32K, - .type = MT_MEMORY_NONCACHED, - }, }; static struct resource dm365_ks_resources[] = { diff --git a/arch/arm/mach-davinci/dm644x.c b/arch/arm/mach-davinci/dm644x.c index cd0c8b1..9ab1f10 100644 --- a/arch/arm/mach-davinci/dm644x.c +++ b/arch/arm/mach-davinci/dm644x.c @@ -786,12 +786,6 @@ static struct map_desc dm644x_io_desc[] = { .length = IO_SIZE, .type = MT_DEVICE }, - { - .virtual = SRAM_VIRT, - .pfn = __phys_to_pfn(0x00008000), - .length = SZ_16K, - .type = MT_MEMORY_NONCACHED, - }, }; /* Contents of JTAG ID register used to identify exact cpu type */ diff --git a/arch/arm/mach-davinci/dm646x.c b/arch/arm/mach-davinci/dm646x.c index 97c0f8e..ac7b431 100644 --- a/arch/arm/mach-davinci/dm646x.c +++ b/arch/arm/mach-davinci/dm646x.c @@ -756,12 +756,6 @@ static struct map_desc dm646x_io_desc[] = { .length = IO_SIZE, .type = MT_DEVICE }, - { - .virtual = SRAM_VIRT, - .pfn = __phys_to_pfn(0x00010000), - .length = SZ_32K, - .type = MT_MEMORY_NONCACHED, - }, }; /* Contents of JTAG ID register used to identify exact cpu type */ diff --git a/arch/arm/mach-davinci/include/mach/common.h b/arch/arm/mach-davinci/include/mach/common.h index bdc4aa8..046c723 100644 --- a/arch/arm/mach-davinci/include/mach/common.h +++ b/arch/arm/mach-davinci/include/mach/common.h @@ -104,8 +104,6 @@ int davinci_pm_init(void); static inline int davinci_pm_init(void) { return 0; } #endif -/* standard place to map on-chip SRAMs; they *may* support DMA */ -#define SRAM_VIRT 0xfffe0000 #define SRAM_SIZE SZ_128K #endif /* __ARCH_ARM_MACH_DAVINCI_COMMON_H */ diff --git a/arch/arm/mach-davinci/sram.c b/arch/arm/mach-davinci/sram.c index db0f778..fa56374 100644 --- a/arch/arm/mach-davinci/sram.c +++ b/arch/arm/mach-davinci/sram.c @@ -10,6 +10,7 @@ */ #include #include +#include #include #include @@ -32,7 +33,7 @@ void *sram_alloc(size_t len, dma_addr_t *dma) return NULL; if (dma) - *dma = dma_base + (vaddr - SRAM_VIRT); + *dma = gen_pool_virt_to_phys(sram_pool, vaddr); return (void *)vaddr; } @@ -53,8 +54,10 @@ EXPORT_SYMBOL(sram_free); */ static int __init sram_init(void) { + phys_addr_t phys = davinci_soc_info.sram_dma; unsigned len = davinci_soc_info.sram_len; int status = 0; + void *addr; if (len) { len = min_t(unsigned, len, SRAM_SIZE); @@ -62,8 +65,17 @@ static int __init sram_init(void) if (!sram_pool) status = -ENOMEM; } - if (sram_pool) - status = gen_pool_add(sram_pool, SRAM_VIRT, len, -1); + + if (sram_pool) { + addr = ioremap(phys, len); + if (!addr) + return -ENOMEM; + status = gen_pool_add_virt(sram_pool, (unsigned)addr, + phys, len, -1); + if (status < 0) + iounmap(addr); + } + WARN_ON(status < 0); return status; } -- cgit v0.10.2 From c94472d4ad11c5b7d8cd527d136c198269d390fc Mon Sep 17 00:00:00 2001 From: Subhasish Ghosh Date: Fri, 5 Oct 2012 13:04:42 -0400 Subject: ARM: davinci: da850: changed SRAM allocator to shared ram. This patch modifies the sram allocator to allocate memory from the DA8XX shared RAM. Regression tested suspend/resume on AM180x EVM. Signed-off-by: Subhasish Ghosh [rebased onto consolidated SRAM patches] Signed-off-by: Ben Gardiner [rebased to mainline as consolidated SRAM patches were dropped] Signed-off-by: Matt Porter Signed-off-by: Sekhar Nori diff --git a/arch/arm/mach-davinci/da850.c b/arch/arm/mach-davinci/da850.c index ffc84f5..41d2cab 100644 --- a/arch/arm/mach-davinci/da850.c +++ b/arch/arm/mach-davinci/da850.c @@ -1233,8 +1233,8 @@ static struct davinci_soc_info davinci_soc_info_da850 = { .gpio_irq = IRQ_DA8XX_GPIO0, .serial_dev = &da8xx_serial_device, .emac_pdata = &da8xx_emac_pdata, - .sram_dma = DA8XX_ARM_RAM_BASE, - .sram_len = SZ_8K, + .sram_dma = DA8XX_SHARED_RAM_BASE, + .sram_len = SZ_128K, }; void __init da850_init(void) diff --git a/arch/arm/mach-davinci/include/mach/da8xx.h b/arch/arm/mach-davinci/include/mach/da8xx.h index aaccdc4..97bc700 100644 --- a/arch/arm/mach-davinci/include/mach/da8xx.h +++ b/arch/arm/mach-davinci/include/mach/da8xx.h @@ -72,6 +72,7 @@ extern unsigned int da850_max_speed; #define DA8XX_AEMIF_CS2_BASE 0x60000000 #define DA8XX_AEMIF_CS3_BASE 0x62000000 #define DA8XX_AEMIF_CTL_BASE 0x68000000 +#define DA8XX_SHARED_RAM_BASE 0x80000000 #define DA8XX_ARM_RAM_BASE 0xffff0000 void __init da830_init(void); -- cgit v0.10.2 From 983c42ba3465d4a80edfd318de24f8ffb2bf71ca Mon Sep 17 00:00:00 2001 From: Matt Porter Date: Fri, 5 Oct 2012 13:04:43 -0400 Subject: ARM: davinci: add platform hook to fetch the SRAM pool Adds sram_get_gen_pool() which allows platform code to get the machine's SRAM gen_pool. The gen_pool may be passed in platform data for driver genalloc use. Signed-off-by: Matt Porter Signed-off-by: Sekhar Nori diff --git a/arch/arm/mach-davinci/include/mach/sram.h b/arch/arm/mach-davinci/include/mach/sram.h index 111f7cc..4e5db56 100644 --- a/arch/arm/mach-davinci/include/mach/sram.h +++ b/arch/arm/mach-davinci/include/mach/sram.h @@ -24,4 +24,7 @@ extern void *sram_alloc(size_t len, dma_addr_t *dma); extern void sram_free(void *addr, size_t len); +/* Get the struct gen_pool * for use in platform data */ +extern struct gen_pool *sram_get_gen_pool(void); + #endif /* __MACH_SRAM_H */ diff --git a/arch/arm/mach-davinci/sram.c b/arch/arm/mach-davinci/sram.c index fa56374..c5f7ee5 100644 --- a/arch/arm/mach-davinci/sram.c +++ b/arch/arm/mach-davinci/sram.c @@ -18,6 +18,11 @@ static struct gen_pool *sram_pool; +struct gen_pool *sram_get_gen_pool(void) +{ + return sram_pool; +} + void *sram_alloc(size_t len, dma_addr_t *dma) { unsigned long vaddr; -- cgit v0.10.2 From 8e0d72d2c7a6955692ba0a21bbf5ca86e8061777 Mon Sep 17 00:00:00 2001 From: Matt Porter Date: Mon, 8 Oct 2012 09:53:08 -0400 Subject: ARM: davinci: da8xx: add DA850 PRUSS support Adds PRUSS clock support and registration helper for the uio_pruss device. Signed-off-by: Matt Porter Signed-off-by: Sekhar Nori diff --git a/arch/arm/mach-davinci/da850.c b/arch/arm/mach-davinci/da850.c index 41d2cab..68c5fe0 100644 --- a/arch/arm/mach-davinci/da850.c +++ b/arch/arm/mach-davinci/da850.c @@ -212,6 +212,12 @@ static struct clk tptc2_clk = { .flags = ALWAYS_ENABLED, }; +static struct clk pruss_clk = { + .name = "pruss", + .parent = &pll0_sysclk2, + .lpsc = DA8XX_LPSC0_PRUSS, +}; + static struct clk uart0_clk = { .name = "uart0", .parent = &pll0_sysclk2, @@ -385,6 +391,7 @@ static struct clk_lookup da850_clks[] = { CLK(NULL, "tptc1", &tptc1_clk), CLK(NULL, "tpcc1", &tpcc1_clk), CLK(NULL, "tptc2", &tptc2_clk), + CLK("pruss_uio", "pruss", &pruss_clk), CLK(NULL, "uart0", &uart0_clk), CLK(NULL, "uart1", &uart1_clk), CLK(NULL, "uart2", &uart2_clk), diff --git a/arch/arm/mach-davinci/devices-da8xx.c b/arch/arm/mach-davinci/devices-da8xx.c index d53612f..46c9a0c 100644 --- a/arch/arm/mach-davinci/devices-da8xx.c +++ b/arch/arm/mach-davinci/devices-da8xx.c @@ -22,6 +22,7 @@ #include #include #include +#include #include "clock.h" #include "asp.h" @@ -32,6 +33,7 @@ #define DA8XX_WDOG_BASE 0x01c21000 /* DA8XX_TIMER64P1_BASE */ #define DA8XX_I2C0_BASE 0x01c22000 #define DA8XX_RTC_BASE 0x01c23000 +#define DA8XX_PRUSS_MEM_BASE 0x01c30000 #define DA8XX_MMCSD0_BASE 0x01c40000 #define DA8XX_SPI0_BASE 0x01c41000 #define DA830_SPI1_BASE 0x01e12000 @@ -518,6 +520,75 @@ void __init da8xx_register_mcasp(int id, struct snd_platform_data *pdata) } } +static struct resource da8xx_pruss_resources[] = { + { + .start = DA8XX_PRUSS_MEM_BASE, + .end = DA8XX_PRUSS_MEM_BASE + 0xFFFF, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_DA8XX_EVTOUT0, + .end = IRQ_DA8XX_EVTOUT0, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_DA8XX_EVTOUT1, + .end = IRQ_DA8XX_EVTOUT1, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_DA8XX_EVTOUT2, + .end = IRQ_DA8XX_EVTOUT2, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_DA8XX_EVTOUT3, + .end = IRQ_DA8XX_EVTOUT3, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_DA8XX_EVTOUT4, + .end = IRQ_DA8XX_EVTOUT4, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_DA8XX_EVTOUT5, + .end = IRQ_DA8XX_EVTOUT5, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_DA8XX_EVTOUT6, + .end = IRQ_DA8XX_EVTOUT6, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_DA8XX_EVTOUT7, + .end = IRQ_DA8XX_EVTOUT7, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct uio_pruss_pdata da8xx_uio_pruss_pdata = { + .pintc_base = 0x4000, +}; + +static struct platform_device da8xx_uio_pruss_dev = { + .name = "pruss_uio", + .id = -1, + .num_resources = ARRAY_SIZE(da8xx_pruss_resources), + .resource = da8xx_pruss_resources, + .dev = { + .coherent_dma_mask = DMA_BIT_MASK(32), + .platform_data = &da8xx_uio_pruss_pdata, + } +}; + +int __init da8xx_register_uio_pruss(void) +{ + da8xx_uio_pruss_pdata.sram_pool = sram_get_gen_pool(); + return platform_device_register(&da8xx_uio_pruss_dev); +} + static const struct display_panel disp_panel = { QVGA, 16, diff --git a/arch/arm/mach-davinci/include/mach/da8xx.h b/arch/arm/mach-davinci/include/mach/da8xx.h index 97bc700..700d311 100644 --- a/arch/arm/mach-davinci/include/mach/da8xx.h +++ b/arch/arm/mach-davinci/include/mach/da8xx.h @@ -26,6 +26,7 @@ #include #include #include +#include #include @@ -87,6 +88,7 @@ int da8xx_register_watchdog(void); int da8xx_register_usb20(unsigned mA, unsigned potpgt); int da8xx_register_usb11(struct da8xx_ohci_root_hub *pdata); int da8xx_register_emac(void); +int da8xx_register_uio_pruss(void); int da8xx_register_lcdc(struct da8xx_lcdc_platform_data *pdata); int da8xx_register_mmcsd0(struct davinci_mmc_config *config); int da850_register_mmcsd1(struct davinci_mmc_config *config); -- cgit v0.10.2 From a6380c13c112af5122b8284c8cf1ec09aacae81d Mon Sep 17 00:00:00 2001 From: Thomas Petazzoni Date: Sat, 27 Oct 2012 19:00:49 +0200 Subject: ARM: bcm2835: enable procfs and sysfs in defconfig For some reason, support for proc and sysfs is currently disabled in the bcm2835_defconfig, even though those filesystems are quite essential even for very basic Linux userspace. As most defconfig have them enabled by default, enable them as well in bcm2835_defconfig. Signed-off-by: Thomas Petazzoni Signed-off-by: Stephen Warren diff --git a/arch/arm/configs/bcm2835_defconfig b/arch/arm/configs/bcm2835_defconfig index 7aea702..74e27f0 100644 --- a/arch/arm/configs/bcm2835_defconfig +++ b/arch/arm/configs/bcm2835_defconfig @@ -66,8 +66,6 @@ CONFIG_TTY_PRINTK=y # CONFIG_FILE_LOCKING is not set # CONFIG_DNOTIFY is not set # CONFIG_INOTIFY_USER is not set -# CONFIG_PROC_FS is not set -# CONFIG_SYSFS is not set # CONFIG_MISC_FILESYSTEMS is not set CONFIG_PRINTK_TIME=y # CONFIG_ENABLE_WARN_DEPRECATED is not set -- cgit v0.10.2 From 4be052e1200ef9a574e499bb00b31a1d861bc219 Mon Sep 17 00:00:00 2001 From: Rob Herring Date: Fri, 17 Aug 2012 09:41:04 -0500 Subject: ARM: highbank: disable unused sdhci and gpio in dts These peripherals are not enabled in current systems, so turn them off. Signed-off-by: Rob Herring Acked-by: Arnd Bergmann diff --git a/arch/arm/boot/dts/highbank.dts b/arch/arm/boot/dts/highbank.dts index 0c6fc34..28d5872 100644 --- a/arch/arm/boot/dts/highbank.dts +++ b/arch/arm/boot/dts/highbank.dts @@ -132,6 +132,7 @@ reg = <0xffe0e000 0x1000>; interrupts = <0 90 4>; clocks = <&eclk>; + status = "disabled"; }; memory-controller@fff00000 { @@ -156,6 +157,7 @@ interrupts = <0 14 4>; clocks = <&pclk>; clock-names = "apb_pclk"; + status = "disabled"; }; gpiof: gpio@fff31000 { @@ -166,6 +168,7 @@ interrupts = <0 15 4>; clocks = <&pclk>; clock-names = "apb_pclk"; + status = "disabled"; }; gpiog: gpio@fff32000 { @@ -176,6 +179,7 @@ interrupts = <0 16 4>; clocks = <&pclk>; clock-names = "apb_pclk"; + status = "disabled"; }; gpioh: gpio@fff33000 { @@ -186,6 +190,7 @@ interrupts = <0 17 4>; clocks = <&pclk>; clock-names = "apb_pclk"; + status = "disabled"; }; timer { -- cgit v0.10.2 From 185bdffb4b2997a2d4ee2e88d52a6539bde59eea Mon Sep 17 00:00:00 2001 From: Rob Herring Date: Tue, 18 Sep 2012 21:03:42 -0500 Subject: ARM: highbank: enable coherent DMA for xgmac in dts Enable the xgmac to use the coherent DMA path in highbank.dts Signed-off-by: Rob Herring Acked-by: Arnd Bergmann diff --git a/arch/arm/boot/dts/highbank.dts b/arch/arm/boot/dts/highbank.dts index 28d5872..e39a79a 100644 --- a/arch/arm/boot/dts/highbank.dts +++ b/arch/arm/boot/dts/highbank.dts @@ -308,12 +308,14 @@ compatible = "calxeda,hb-xgmac"; reg = <0xfff50000 0x1000>; interrupts = <0 77 4 0 78 4 0 79 4>; + dma-coherent; }; ethernet@fff51000 { compatible = "calxeda,hb-xgmac"; reg = <0xfff51000 0x1000>; interrupts = <0 80 4 0 81 4 0 82 4>; + dma-coherent; }; combophy0: combo-phy@fff58000 { -- cgit v0.10.2 From 7d6ab9b8620bbca6718b36242113f4f069840641 Mon Sep 17 00:00:00 2001 From: Rob Herring Date: Thu, 25 Oct 2012 11:59:09 -0500 Subject: ARM: dts: Add Calxeda ECX-2000 support Separate out common dts pieces from highbank dts and add support for Calxeda ECX-2000 (Midway) SOC. Signed-off-by: Rob Herring Acked-by: Arnd Bergmann diff --git a/Documentation/devicetree/bindings/arm/calxeda.txt b/Documentation/devicetree/bindings/arm/calxeda.txt index 4755caa..25fcf96 100644 --- a/Documentation/devicetree/bindings/arm/calxeda.txt +++ b/Documentation/devicetree/bindings/arm/calxeda.txt @@ -1,8 +1,15 @@ -Calxeda Highbank Platforms Device Tree Bindings +Calxeda Platforms Device Tree Bindings ----------------------------------------------- -Boards with Calxeda Cortex-A9 based Highbank SOC shall have the following -properties. +Boards with Calxeda Cortex-A9 based ECX-1000 (Highbank) SOC shall have the +following properties. Required root node properties: - compatible = "calxeda,highbank"; + + +Boards with Calxeda Cortex-A15 based ECX-2000 SOC shall have the following +properties. + +Required root node properties: + - compatible = "calxeda,ecx-2000"; diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index f37cf9f..5cc9566 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -24,7 +24,8 @@ dtb-$(CONFIG_ARCH_EXYNOS) += exynos4210-origen.dtb \ exynos4210-smdkv310.dtb \ exynos4210-trats.dtb \ exynos5250-smdk5250.dtb -dtb-$(CONFIG_ARCH_HIGHBANK) += highbank.dtb +dtb-$(CONFIG_ARCH_HIGHBANK) += highbank.dtb \ + ecx-2000.dtb dtb-$(CONFIG_ARCH_INTEGRATOR) += integratorap.dtb \ integratorcp.dtb dtb-$(CONFIG_ARCH_LPC32XX) += ea3250.dtb phy3250.dtb diff --git a/arch/arm/boot/dts/ecx-2000.dts b/arch/arm/boot/dts/ecx-2000.dts new file mode 100644 index 0000000..46477ac --- /dev/null +++ b/arch/arm/boot/dts/ecx-2000.dts @@ -0,0 +1,104 @@ +/* + * Copyright 2011-2012 Calxeda, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program. If not, see . + */ + +/dts-v1/; + +/* First 4KB has pen for secondary cores. */ +/memreserve/ 0x00000000 0x0001000; + +/ { + model = "Calxeda ECX-2000"; + compatible = "calxeda,ecx-2000"; + #address-cells = <2>; + #size-cells = <2>; + clock-ranges; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + compatible = "arm,cortex-a15"; + reg = <0>; + clocks = <&a9pll>; + clock-names = "cpu"; + }; + + cpu@1 { + compatible = "arm,cortex-a15"; + reg = <1>; + clocks = <&a9pll>; + clock-names = "cpu"; + }; + + cpu@2 { + compatible = "arm,cortex-a15"; + reg = <2>; + clocks = <&a9pll>; + clock-names = "cpu"; + }; + + cpu@3 { + compatible = "arm,cortex-a15"; + reg = <3>; + clocks = <&a9pll>; + clock-names = "cpu"; + }; + }; + + memory@0 { + name = "memory"; + device_type = "memory"; + reg = <0x00000000 0x00000000 0x00000000 0xff800000>; + }; + + memory@200000000 { + name = "memory"; + device_type = "memory"; + reg = <0x00000002 0x00000000 0x00000003 0x00000000>; + }; + + soc { + ranges = <0x00000000 0x00000000 0x00000000 0xffffffff>; + + timer { + compatible = "arm,cortex-a15-timer", "arm,armv7-timer"; interrupts = <1 13 0xf08>, + <1 14 0xf08>, + <1 11 0xf08>, + <1 10 0xf08>; + }; + + intc: interrupt-controller@fff11000 { + compatible = "arm,cortex-a15-gic"; + #interrupt-cells = <3>; + #size-cells = <0>; + #address-cells = <1>; + interrupt-controller; + interrupts = <1 9 0xf04>; + reg = <0xfff11000 0x1000>, + <0xfff12000 0x1000>, + <0xfff14000 0x2000>, + <0xfff16000 0x2000>; + }; + + pmu { + compatible = "arm,cortex-a9-pmu"; + interrupts = <0 76 4 0 75 4 0 74 4 0 73 4>; + }; + }; +}; + +/include/ "ecx-common.dtsi" diff --git a/arch/arm/boot/dts/ecx-common.dtsi b/arch/arm/boot/dts/ecx-common.dtsi new file mode 100644 index 0000000..d61b535 --- /dev/null +++ b/arch/arm/boot/dts/ecx-common.dtsi @@ -0,0 +1,237 @@ +/* + * Copyright 2011-2012 Calxeda, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program. If not, see . + */ + +/ { + chosen { + bootargs = "console=ttyAMA0"; + }; + + soc { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + interrupt-parent = <&intc>; + + sata@ffe08000 { + compatible = "calxeda,hb-ahci"; + reg = <0xffe08000 0x10000>; + interrupts = <0 83 4>; + dma-coherent; + calxeda,port-phys = <&combophy5 0 &combophy0 0 + &combophy0 1 &combophy0 2 + &combophy0 3>; + }; + + sdhci@ffe0e000 { + compatible = "calxeda,hb-sdhci"; + reg = <0xffe0e000 0x1000>; + interrupts = <0 90 4>; + clocks = <&eclk>; + status = "disabled"; + }; + + memory-controller@fff00000 { + compatible = "calxeda,hb-ddr-ctrl"; + reg = <0xfff00000 0x1000>; + interrupts = <0 91 4>; + }; + + ipc@fff20000 { + compatible = "arm,pl320", "arm,primecell"; + reg = <0xfff20000 0x1000>; + interrupts = <0 7 4>; + clocks = <&pclk>; + clock-names = "apb_pclk"; + }; + + gpioe: gpio@fff30000 { + #gpio-cells = <2>; + compatible = "arm,pl061", "arm,primecell"; + gpio-controller; + reg = <0xfff30000 0x1000>; + interrupts = <0 14 4>; + clocks = <&pclk>; + clock-names = "apb_pclk"; + status = "disabled"; + }; + + gpiof: gpio@fff31000 { + #gpio-cells = <2>; + compatible = "arm,pl061", "arm,primecell"; + gpio-controller; + reg = <0xfff31000 0x1000>; + interrupts = <0 15 4>; + clocks = <&pclk>; + clock-names = "apb_pclk"; + status = "disabled"; + }; + + gpiog: gpio@fff32000 { + #gpio-cells = <2>; + compatible = "arm,pl061", "arm,primecell"; + gpio-controller; + reg = <0xfff32000 0x1000>; + interrupts = <0 16 4>; + clocks = <&pclk>; + clock-names = "apb_pclk"; + status = "disabled"; + }; + + gpioh: gpio@fff33000 { + #gpio-cells = <2>; + compatible = "arm,pl061", "arm,primecell"; + gpio-controller; + reg = <0xfff33000 0x1000>; + interrupts = <0 17 4>; + clocks = <&pclk>; + clock-names = "apb_pclk"; + status = "disabled"; + }; + + timer@fff34000 { + compatible = "arm,sp804", "arm,primecell"; + reg = <0xfff34000 0x1000>; + interrupts = <0 18 4>; + clocks = <&pclk>; + clock-names = "apb_pclk"; + }; + + rtc@fff35000 { + compatible = "arm,pl031", "arm,primecell"; + reg = <0xfff35000 0x1000>; + interrupts = <0 19 4>; + clocks = <&pclk>; + clock-names = "apb_pclk"; + }; + + serial@fff36000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0xfff36000 0x1000>; + interrupts = <0 20 4>; + clocks = <&pclk>; + clock-names = "apb_pclk"; + }; + + smic@fff3a000 { + compatible = "ipmi-smic"; + device_type = "ipmi"; + reg = <0xfff3a000 0x1000>; + interrupts = <0 24 4>; + reg-size = <4>; + reg-spacing = <4>; + }; + + sregs@fff3c000 { + compatible = "calxeda,hb-sregs"; + reg = <0xfff3c000 0x1000>; + + clocks { + #address-cells = <1>; + #size-cells = <0>; + + osc: oscillator { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <33333000>; + }; + + ddrpll: ddrpll { + #clock-cells = <0>; + compatible = "calxeda,hb-pll-clock"; + clocks = <&osc>; + reg = <0x108>; + }; + + a9pll: a9pll { + #clock-cells = <0>; + compatible = "calxeda,hb-pll-clock"; + clocks = <&osc>; + reg = <0x100>; + }; + + a9periphclk: a9periphclk { + #clock-cells = <0>; + compatible = "calxeda,hb-a9periph-clock"; + clocks = <&a9pll>; + reg = <0x104>; + }; + + a9bclk: a9bclk { + #clock-cells = <0>; + compatible = "calxeda,hb-a9bus-clock"; + clocks = <&a9pll>; + reg = <0x104>; + }; + + emmcpll: emmcpll { + #clock-cells = <0>; + compatible = "calxeda,hb-pll-clock"; + clocks = <&osc>; + reg = <0x10C>; + }; + + eclk: eclk { + #clock-cells = <0>; + compatible = "calxeda,hb-emmc-clock"; + clocks = <&emmcpll>; + reg = <0x114>; + }; + + pclk: pclk { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <150000000>; + }; + }; + }; + + dma@fff3d000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0xfff3d000 0x1000>; + interrupts = <0 92 4>; + clocks = <&pclk>; + clock-names = "apb_pclk"; + }; + + ethernet@fff50000 { + compatible = "calxeda,hb-xgmac"; + reg = <0xfff50000 0x1000>; + interrupts = <0 77 4 0 78 4 0 79 4>; + dma-coherent; + }; + + ethernet@fff51000 { + compatible = "calxeda,hb-xgmac"; + reg = <0xfff51000 0x1000>; + interrupts = <0 80 4 0 81 4 0 82 4>; + dma-coherent; + }; + + combophy0: combo-phy@fff58000 { + compatible = "calxeda,hb-combophy"; + #phy-cells = <1>; + reg = <0xfff58000 0x1000>; + phydev = <5>; + }; + + combophy5: combo-phy@fff5d000 { + compatible = "calxeda,hb-combophy"; + #phy-cells = <1>; + reg = <0xfff5d000 0x1000>; + phydev = <31>; + }; + }; +}; diff --git a/arch/arm/boot/dts/highbank.dts b/arch/arm/boot/dts/highbank.dts index e39a79a..a9ae5d3 100644 --- a/arch/arm/boot/dts/highbank.dts +++ b/arch/arm/boot/dts/highbank.dts @@ -69,16 +69,8 @@ reg = <0x00000000 0xff900000>; }; - chosen { - bootargs = "console=ttyAMA0"; - }; - soc { - #address-cells = <1>; - #size-cells = <1>; - compatible = "simple-bus"; - interrupt-parent = <&intc>; - ranges; + ranges = <0x00000000 0x00000000 0xffffffff>; timer@fff10600 { compatible = "arm,cortex-a9-twd-timer"; @@ -117,178 +109,6 @@ interrupts = <0 76 4 0 75 4 0 74 4 0 73 4>; }; - sata@ffe08000 { - compatible = "calxeda,hb-ahci"; - reg = <0xffe08000 0x10000>; - interrupts = <0 83 4>; - calxeda,port-phys = <&combophy5 0 &combophy0 0 - &combophy0 1 &combophy0 2 - &combophy0 3>; - dma-coherent; - }; - - sdhci@ffe0e000 { - compatible = "calxeda,hb-sdhci"; - reg = <0xffe0e000 0x1000>; - interrupts = <0 90 4>; - clocks = <&eclk>; - status = "disabled"; - }; - - memory-controller@fff00000 { - compatible = "calxeda,hb-ddr-ctrl"; - reg = <0xfff00000 0x1000>; - interrupts = <0 91 4>; - }; - - ipc@fff20000 { - compatible = "arm,pl320", "arm,primecell"; - reg = <0xfff20000 0x1000>; - interrupts = <0 7 4>; - clocks = <&pclk>; - clock-names = "apb_pclk"; - }; - - gpioe: gpio@fff30000 { - #gpio-cells = <2>; - compatible = "arm,pl061", "arm,primecell"; - gpio-controller; - reg = <0xfff30000 0x1000>; - interrupts = <0 14 4>; - clocks = <&pclk>; - clock-names = "apb_pclk"; - status = "disabled"; - }; - - gpiof: gpio@fff31000 { - #gpio-cells = <2>; - compatible = "arm,pl061", "arm,primecell"; - gpio-controller; - reg = <0xfff31000 0x1000>; - interrupts = <0 15 4>; - clocks = <&pclk>; - clock-names = "apb_pclk"; - status = "disabled"; - }; - - gpiog: gpio@fff32000 { - #gpio-cells = <2>; - compatible = "arm,pl061", "arm,primecell"; - gpio-controller; - reg = <0xfff32000 0x1000>; - interrupts = <0 16 4>; - clocks = <&pclk>; - clock-names = "apb_pclk"; - status = "disabled"; - }; - - gpioh: gpio@fff33000 { - #gpio-cells = <2>; - compatible = "arm,pl061", "arm,primecell"; - gpio-controller; - reg = <0xfff33000 0x1000>; - interrupts = <0 17 4>; - clocks = <&pclk>; - clock-names = "apb_pclk"; - status = "disabled"; - }; - - timer { - compatible = "arm,sp804", "arm,primecell"; - reg = <0xfff34000 0x1000>; - interrupts = <0 18 4>; - clocks = <&pclk>; - clock-names = "apb_pclk"; - }; - - rtc@fff35000 { - compatible = "arm,pl031", "arm,primecell"; - reg = <0xfff35000 0x1000>; - interrupts = <0 19 4>; - clocks = <&pclk>; - clock-names = "apb_pclk"; - }; - - serial@fff36000 { - compatible = "arm,pl011", "arm,primecell"; - reg = <0xfff36000 0x1000>; - interrupts = <0 20 4>; - clocks = <&pclk>; - clock-names = "apb_pclk"; - }; - - smic@fff3a000 { - compatible = "ipmi-smic"; - device_type = "ipmi"; - reg = <0xfff3a000 0x1000>; - interrupts = <0 24 4>; - reg-size = <4>; - reg-spacing = <4>; - }; - - sregs@fff3c000 { - compatible = "calxeda,hb-sregs"; - reg = <0xfff3c000 0x1000>; - - clocks { - #address-cells = <1>; - #size-cells = <0>; - - osc: oscillator { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <33333000>; - }; - - ddrpll: ddrpll { - #clock-cells = <0>; - compatible = "calxeda,hb-pll-clock"; - clocks = <&osc>; - reg = <0x108>; - }; - - a9pll: a9pll { - #clock-cells = <0>; - compatible = "calxeda,hb-pll-clock"; - clocks = <&osc>; - reg = <0x100>; - }; - - a9periphclk: a9periphclk { - #clock-cells = <0>; - compatible = "calxeda,hb-a9periph-clock"; - clocks = <&a9pll>; - reg = <0x104>; - }; - - a9bclk: a9bclk { - #clock-cells = <0>; - compatible = "calxeda,hb-a9bus-clock"; - clocks = <&a9pll>; - reg = <0x104>; - }; - - emmcpll: emmcpll { - #clock-cells = <0>; - compatible = "calxeda,hb-pll-clock"; - clocks = <&osc>; - reg = <0x10C>; - }; - - eclk: eclk { - #clock-cells = <0>; - compatible = "calxeda,hb-emmc-clock"; - clocks = <&emmcpll>; - reg = <0x114>; - }; - - pclk: pclk { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <150000000>; - }; - }; - }; sregs@fff3c200 { compatible = "calxeda,hb-sregs-l2-ecc"; @@ -296,40 +116,7 @@ interrupts = <0 71 4 0 72 4>; }; - dma@fff3d000 { - compatible = "arm,pl330", "arm,primecell"; - reg = <0xfff3d000 0x1000>; - interrupts = <0 92 4>; - clocks = <&pclk>; - clock-names = "apb_pclk"; - }; - - ethernet@fff50000 { - compatible = "calxeda,hb-xgmac"; - reg = <0xfff50000 0x1000>; - interrupts = <0 77 4 0 78 4 0 79 4>; - dma-coherent; - }; - - ethernet@fff51000 { - compatible = "calxeda,hb-xgmac"; - reg = <0xfff51000 0x1000>; - interrupts = <0 80 4 0 81 4 0 82 4>; - dma-coherent; - }; - - combophy0: combo-phy@fff58000 { - compatible = "calxeda,hb-combophy"; - #phy-cells = <1>; - reg = <0xfff58000 0x1000>; - phydev = <5>; - }; - - combophy5: combo-phy@fff5d000 { - compatible = "calxeda,hb-combophy"; - #phy-cells = <1>; - reg = <0xfff5d000 0x1000>; - phydev = <31>; - }; }; }; + +/include/ "ecx-common.dtsi" -- cgit v0.10.2 From 0336517b38c5fd643784eeee8f0d73efd48e3361 Mon Sep 17 00:00:00 2001 From: Rob Herring Date: Thu, 25 Oct 2012 13:53:09 -0500 Subject: ARM: smp_twd: don't warn on no DT node Not having a TWD is valid if we have multiple platforms with different cores, so remove the warning message. Signed-off-by: Rob Herring Acked-by: Arnd Bergmann diff --git a/arch/arm/kernel/smp_twd.c b/arch/arm/kernel/smp_twd.c index b22d700..6ec73f9 100644 --- a/arch/arm/kernel/smp_twd.c +++ b/arch/arm/kernel/smp_twd.c @@ -366,10 +366,8 @@ void __init twd_local_timer_of_register(void) int err; np = of_find_matching_node(NULL, twd_of_match); - if (!np) { - err = -ENODEV; - goto out; - } + if (!np) + return -ENODEV; twd_ppi = irq_of_parse_and_map(np, 0); if (!twd_ppi) { -- cgit v0.10.2 From 7a2848d369b2b9281400e6c9f08e21ec71cd1dcb Mon Sep 17 00:00:00 2001 From: Rob Herring Date: Thu, 25 Oct 2012 12:13:47 -0500 Subject: ARM: highbank: abstract out SCU usage In preparation for A15 support on ECX-2000, the direct calls to SCU registers must be conditional. The SCU power mode register is replaced by a custom register on ECX-2000. Rather than read the number of cores from the SCU, just hardcode it to 4. This removes one use of SCU and removes the need for the SCU to be statically mapped. The cpu initialization will ultimately come from DT. Signed-off-by: Rob Herring Acked-by: Arnd Bergmann diff --git a/arch/arm/mach-highbank/highbank.c b/arch/arm/mach-highbank/highbank.c index 40e36a5..3da921a 100644 --- a/arch/arm/mach-highbank/highbank.c +++ b/arch/arm/mach-highbank/highbank.c @@ -28,30 +28,19 @@ #include #include -#include #include #include #include #include #include #include -#include #include #include "core.h" #include "sysregs.h" void __iomem *sregs_base; - -#define HB_SCU_VIRT_BASE 0xfee00000 -void __iomem *scu_base_addr = ((void __iomem *)(HB_SCU_VIRT_BASE)); - -static struct map_desc scu_io_desc __initdata = { - .virtual = HB_SCU_VIRT_BASE, - .pfn = 0, /* run-time */ - .length = SZ_4K, - .type = MT_DEVICE, -}; +void __iomem *scu_base_addr; static void __init highbank_scu_map_io(void) { @@ -60,13 +49,11 @@ static void __init highbank_scu_map_io(void) /* Get SCU base */ asm("mrc p15, 4, %0, c15, c0, 0" : "=r" (base)); - scu_io_desc.pfn = __phys_to_pfn(base); - iotable_init(&scu_io_desc, 1); + scu_base_addr = ioremap(base, SZ_4K); } static void __init highbank_map_io(void) { - highbank_scu_map_io(); highbank_lluart_map_io(); } @@ -99,6 +86,9 @@ static void __init highbank_init_irq(void) { of_irq_init(irq_match); + if (of_find_compatible_node(NULL, NULL, "arm,cortex-a9")) + highbank_scu_map_io(); + #ifdef CONFIG_CACHE_L2X0 /* Enable PL310 L2 Cache controller */ highbank_smc1(0x102, 0x1); @@ -145,7 +135,6 @@ static struct sys_timer highbank_timer = { static void highbank_power_off(void) { hignbank_set_pwr_shutdown(); - scu_power_mode(scu_base_addr, SCU_PM_POWEROFF); while (1) cpu_do_idle(); diff --git a/arch/arm/mach-highbank/hotplug.c b/arch/arm/mach-highbank/hotplug.c index 2c1b8c3..7b60fac 100644 --- a/arch/arm/mach-highbank/hotplug.c +++ b/arch/arm/mach-highbank/hotplug.c @@ -14,13 +14,11 @@ * this program. If not, see . */ #include -#include -#include -#include #include #include "core.h" +#include "sysregs.h" extern void secondary_startup(void); @@ -33,7 +31,7 @@ void __ref highbank_cpu_die(unsigned int cpu) flush_cache_all(); highbank_set_cpu_jump(cpu, secondary_startup); - scu_power_mode(scu_base_addr, SCU_PM_POWEROFF); + highbank_set_core_pwr(); cpu_do_idle(); diff --git a/arch/arm/mach-highbank/platsmp.c b/arch/arm/mach-highbank/platsmp.c index fa9560e..1129957 100644 --- a/arch/arm/mach-highbank/platsmp.c +++ b/arch/arm/mach-highbank/platsmp.c @@ -42,9 +42,7 @@ static int __cpuinit highbank_boot_secondary(unsigned int cpu, struct task_struc */ static void __init highbank_smp_init_cpus(void) { - unsigned int i, ncores; - - ncores = scu_get_core_count(scu_base_addr); + unsigned int i, ncores = 4; /* sanity check */ if (ncores > NR_CPUS) { @@ -65,7 +63,8 @@ static void __init highbank_smp_prepare_cpus(unsigned int max_cpus) { int i; - scu_enable(scu_base_addr); + if (scu_base_addr) + scu_enable(scu_base_addr); /* * Write the address of secondary startup into the jump table diff --git a/arch/arm/mach-highbank/pm.c b/arch/arm/mach-highbank/pm.c index de866f2..74aa135 100644 --- a/arch/arm/mach-highbank/pm.c +++ b/arch/arm/mach-highbank/pm.c @@ -19,7 +19,6 @@ #include #include -#include #include #include "core.h" @@ -35,8 +34,6 @@ static int highbank_pm_enter(suspend_state_t state) { hignbank_set_pwr_suspend(); highbank_set_cpu_jump(0, cpu_resume); - - scu_power_mode(scu_base_addr, SCU_PM_POWEROFF); cpu_suspend(0, highbank_suspend_finish); return 0; diff --git a/arch/arm/mach-highbank/sysregs.h b/arch/arm/mach-highbank/sysregs.h index 0e91338..e13e8ea 100644 --- a/arch/arm/mach-highbank/sysregs.h +++ b/arch/arm/mach-highbank/sysregs.h @@ -17,6 +17,10 @@ #define _MACH_HIGHBANK__SYSREGS_H_ #include +#include +#include +#include +#include "core.h" extern void __iomem *sregs_base; @@ -29,24 +33,39 @@ extern void __iomem *sregs_base; #define HB_PWR_HARD_RESET 2 #define HB_PWR_SHUTDOWN 3 +#define SREG_CPU_PWR_CTRL(c) (0x200 + ((c) * 4)) + +static inline void highbank_set_core_pwr(void) +{ + int cpu = cpu_logical_map(smp_processor_id()); + if (scu_base_addr) + scu_power_mode(scu_base_addr, SCU_PM_POWEROFF); + else + writel_relaxed(1, sregs_base + SREG_CPU_PWR_CTRL(cpu)); +} + static inline void hignbank_set_pwr_suspend(void) { writel(HB_PWR_SUSPEND, sregs_base + HB_SREG_A9_PWR_REQ); + highbank_set_core_pwr(); } static inline void hignbank_set_pwr_shutdown(void) { writel(HB_PWR_SHUTDOWN, sregs_base + HB_SREG_A9_PWR_REQ); + highbank_set_core_pwr(); } static inline void hignbank_set_pwr_soft_reset(void) { writel(HB_PWR_SOFT_RESET, sregs_base + HB_SREG_A9_PWR_REQ); + highbank_set_core_pwr(); } static inline void hignbank_set_pwr_hard_reset(void) { writel(HB_PWR_HARD_RESET, sregs_base + HB_SREG_A9_PWR_REQ); + highbank_set_core_pwr(); } #endif diff --git a/arch/arm/mach-highbank/system.c b/arch/arm/mach-highbank/system.c index 82c27230..194a5bb 100644 --- a/arch/arm/mach-highbank/system.c +++ b/arch/arm/mach-highbank/system.c @@ -14,7 +14,6 @@ * this program. If not, see . */ #include -#include #include #include "core.h" @@ -27,7 +26,6 @@ void highbank_restart(char mode, const char *cmd) else hignbank_set_pwr_soft_reset(); - scu_power_mode(scu_base_addr, SCU_PM_POWEROFF); cpu_do_idle(); } -- cgit v0.10.2 From e095c0d122c09efabe7d4136ce77f72c636c4879 Mon Sep 17 00:00:00 2001 From: Rob Herring Date: Thu, 25 Oct 2012 12:19:52 -0500 Subject: ARM: highbank: Add initial ECX-2000 support And initial Calxeda ECX-2000 SOC support. This adds Cortex-A15 peripherals and machine DT match name. Signed-off-by: Rob Herring Acked-by: Arnd Bergmann diff --git a/arch/arm/mach-highbank/Kconfig b/arch/arm/mach-highbank/Kconfig index 0e1d0a4..551c97e 100644 --- a/arch/arm/mach-highbank/Kconfig +++ b/arch/arm/mach-highbank/Kconfig @@ -1,5 +1,5 @@ config ARCH_HIGHBANK - bool "Calxeda ECX-1000 (Highbank)" if ARCH_MULTI_V7 + bool "Calxeda ECX-1000/2000 (Highbank/Midway)" if ARCH_MULTI_V7 select ARCH_WANT_OPTIONAL_GPIOLIB select ARM_AMBA select ARM_GIC diff --git a/arch/arm/mach-highbank/highbank.c b/arch/arm/mach-highbank/highbank.c index 3da921a..3e60e57 100644 --- a/arch/arm/mach-highbank/highbank.c +++ b/arch/arm/mach-highbank/highbank.c @@ -26,6 +26,7 @@ #include #include +#include #include #include #include @@ -70,6 +71,7 @@ void highbank_set_cpu_jump(int cpu, void *jump_addr) } const static struct of_device_id irq_match[] = { + { .compatible = "arm,cortex-a15-gic", .data = gic_of_init, }, { .compatible = "arm,cortex-a9-gic", .data = gic_of_init, }, {} }; @@ -126,6 +128,9 @@ static void __init highbank_timer_init(void) sp804_clockevents_init(timer_base, irq, "timer0"); twd_local_timer_of_register(); + + arch_timer_of_register(); + arch_timer_sched_clock_init(); } static struct sys_timer highbank_timer = { @@ -200,6 +205,7 @@ static void __init highbank_init(void) static const char *highbank_match[] __initconst = { "calxeda,highbank", + "calxeda,ecx-2000", NULL, }; -- cgit v0.10.2 From 2389d5014342e9535aad212d0c68d439aaf534ba Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Wed, 31 Oct 2012 22:04:31 +0100 Subject: ARM: plat-versatile: move FPGA irq driver to drivers/irqchip This moves the Versatile FPGA interrupt controller driver, used in the Integrator/AP, Integrator/CP and some Versatile boards, out of arch/arm/plat-versatile and down to drivers/irqchip where we have consensus that such drivers belong. The header file is consequently moved to . Signed-off-by: Linus Walleij diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 73067ef..2205e3eb 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -284,8 +284,8 @@ config ARCH_INTEGRATOR select MULTI_IRQ_HANDLER select NEED_MACH_MEMORY_H select PLAT_VERSATILE - select PLAT_VERSATILE_FPGA_IRQ select SPARSE_IRQ + select VERSATILE_FPGA_IRQ help Support for ARM's Integrator platform. @@ -318,7 +318,7 @@ config ARCH_VERSATILE select PLAT_VERSATILE select PLAT_VERSATILE_CLCD select PLAT_VERSATILE_CLOCK - select PLAT_VERSATILE_FPGA_IRQ + select VERSATILE_FPGA_IRQ help This enables support for ARM Ltd Versatile board. diff --git a/arch/arm/mach-integrator/integrator_ap.c b/arch/arm/mach-integrator/integrator_ap.c index 4f13bc5..e67a9fe 100644 --- a/arch/arm/mach-integrator/integrator_ap.c +++ b/arch/arm/mach-integrator/integrator_ap.c @@ -31,6 +31,7 @@ #include #include #include +#include #include #include #include @@ -56,8 +57,6 @@ #include #include -#include - #include "common.h" /* diff --git a/arch/arm/mach-integrator/integrator_cp.c b/arch/arm/mach-integrator/integrator_cp.c index 4423bc8..acecf04 100644 --- a/arch/arm/mach-integrator/integrator_cp.c +++ b/arch/arm/mach-integrator/integrator_cp.c @@ -20,6 +20,7 @@ #include #include #include +#include #include #include #include @@ -46,7 +47,6 @@ #include #include -#include #include #include "common.h" diff --git a/arch/arm/mach-versatile/core.c b/arch/arm/mach-versatile/core.c index 5b5c1ee..5d59294 100644 --- a/arch/arm/mach-versatile/core.c +++ b/arch/arm/mach-versatile/core.c @@ -32,6 +32,7 @@ #include #include #include +#include #include #include #include @@ -51,7 +52,6 @@ #include #include -#include #include #include "core.h" diff --git a/arch/arm/plat-versatile/Kconfig b/arch/arm/plat-versatile/Kconfig index 2a4ae8a..619f0fa 100644 --- a/arch/arm/plat-versatile/Kconfig +++ b/arch/arm/plat-versatile/Kconfig @@ -6,15 +6,6 @@ config PLAT_VERSATILE_CLOCK config PLAT_VERSATILE_CLCD bool -config PLAT_VERSATILE_FPGA_IRQ - bool - select IRQ_DOMAIN - -config PLAT_VERSATILE_FPGA_IRQ_NR - int - default 4 - depends on PLAT_VERSATILE_FPGA_IRQ - config PLAT_VERSATILE_LEDS def_bool y if NEW_LEDS depends on ARCH_REALVIEW || ARCH_VERSATILE diff --git a/arch/arm/plat-versatile/Makefile b/arch/arm/plat-versatile/Makefile index 74cfd94..f88d448 100644 --- a/arch/arm/plat-versatile/Makefile +++ b/arch/arm/plat-versatile/Makefile @@ -2,7 +2,6 @@ ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/$(src)/include obj-$(CONFIG_PLAT_VERSATILE_CLOCK) += clock.o obj-$(CONFIG_PLAT_VERSATILE_CLCD) += clcd.o -obj-$(CONFIG_PLAT_VERSATILE_FPGA_IRQ) += fpga-irq.o obj-$(CONFIG_PLAT_VERSATILE_LEDS) += leds.o obj-$(CONFIG_PLAT_VERSATILE_SCHED_CLOCK) += sched-clock.o obj-$(CONFIG_SMP) += headsmp.o platsmp.o diff --git a/arch/arm/plat-versatile/fpga-irq.c b/arch/arm/plat-versatile/fpga-irq.c deleted file mode 100644 index dfe317c..0000000 --- a/arch/arm/plat-versatile/fpga-irq.c +++ /dev/null @@ -1,204 +0,0 @@ -/* - * Support for Versatile FPGA-based IRQ controllers - */ -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include - -#define IRQ_STATUS 0x00 -#define IRQ_RAW_STATUS 0x04 -#define IRQ_ENABLE_SET 0x08 -#define IRQ_ENABLE_CLEAR 0x0c -#define INT_SOFT_SET 0x10 -#define INT_SOFT_CLEAR 0x14 -#define FIQ_STATUS 0x20 -#define FIQ_RAW_STATUS 0x24 -#define FIQ_ENABLE 0x28 -#define FIQ_ENABLE_SET 0x28 -#define FIQ_ENABLE_CLEAR 0x2C - -/** - * struct fpga_irq_data - irq data container for the FPGA IRQ controller - * @base: memory offset in virtual memory - * @chip: chip container for this instance - * @domain: IRQ domain for this instance - * @valid: mask for valid IRQs on this controller - * @used_irqs: number of active IRQs on this controller - */ -struct fpga_irq_data { - void __iomem *base; - struct irq_chip chip; - u32 valid; - struct irq_domain *domain; - u8 used_irqs; -}; - -/* we cannot allocate memory when the controllers are initially registered */ -static struct fpga_irq_data fpga_irq_devices[CONFIG_PLAT_VERSATILE_FPGA_IRQ_NR]; -static int fpga_irq_id; - -static void fpga_irq_mask(struct irq_data *d) -{ - struct fpga_irq_data *f = irq_data_get_irq_chip_data(d); - u32 mask = 1 << d->hwirq; - - writel(mask, f->base + IRQ_ENABLE_CLEAR); -} - -static void fpga_irq_unmask(struct irq_data *d) -{ - struct fpga_irq_data *f = irq_data_get_irq_chip_data(d); - u32 mask = 1 << d->hwirq; - - writel(mask, f->base + IRQ_ENABLE_SET); -} - -static void fpga_irq_handle(unsigned int irq, struct irq_desc *desc) -{ - struct fpga_irq_data *f = irq_desc_get_handler_data(desc); - u32 status = readl(f->base + IRQ_STATUS); - - if (status == 0) { - do_bad_IRQ(irq, desc); - return; - } - - do { - irq = ffs(status) - 1; - status &= ~(1 << irq); - generic_handle_irq(irq_find_mapping(f->domain, irq)); - } while (status); -} - -/* - * Handle each interrupt in a single FPGA IRQ controller. Returns non-zero - * if we've handled at least one interrupt. This does a single read of the - * status register and handles all interrupts in order from LSB first. - */ -static int handle_one_fpga(struct fpga_irq_data *f, struct pt_regs *regs) -{ - int handled = 0; - int irq; - u32 status; - - while ((status = readl(f->base + IRQ_STATUS))) { - irq = ffs(status) - 1; - handle_IRQ(irq_find_mapping(f->domain, irq), regs); - handled = 1; - } - - return handled; -} - -/* - * Keep iterating over all registered FPGA IRQ controllers until there are - * no pending interrupts. - */ -asmlinkage void __exception_irq_entry fpga_handle_irq(struct pt_regs *regs) -{ - int i, handled; - - do { - for (i = 0, handled = 0; i < fpga_irq_id; ++i) - handled |= handle_one_fpga(&fpga_irq_devices[i], regs); - } while (handled); -} - -static int fpga_irqdomain_map(struct irq_domain *d, unsigned int irq, - irq_hw_number_t hwirq) -{ - struct fpga_irq_data *f = d->host_data; - - /* Skip invalid IRQs, only register handlers for the real ones */ - if (!(f->valid & BIT(hwirq))) - return -ENOTSUPP; - irq_set_chip_data(irq, f); - irq_set_chip_and_handler(irq, &f->chip, - handle_level_irq); - set_irq_flags(irq, IRQF_VALID | IRQF_PROBE); - return 0; -} - -static struct irq_domain_ops fpga_irqdomain_ops = { - .map = fpga_irqdomain_map, - .xlate = irq_domain_xlate_onetwocell, -}; - -void __init fpga_irq_init(void __iomem *base, const char *name, int irq_start, - int parent_irq, u32 valid, struct device_node *node) -{ - struct fpga_irq_data *f; - int i; - - if (fpga_irq_id >= ARRAY_SIZE(fpga_irq_devices)) { - pr_err("%s: too few FPGA IRQ controllers, increase CONFIG_PLAT_VERSATILE_FPGA_IRQ_NR\n", __func__); - return; - } - f = &fpga_irq_devices[fpga_irq_id]; - f->base = base; - f->chip.name = name; - f->chip.irq_ack = fpga_irq_mask; - f->chip.irq_mask = fpga_irq_mask; - f->chip.irq_unmask = fpga_irq_unmask; - f->valid = valid; - - if (parent_irq != -1) { - irq_set_handler_data(parent_irq, f); - irq_set_chained_handler(parent_irq, fpga_irq_handle); - } - - /* This will also allocate irq descriptors */ - f->domain = irq_domain_add_simple(node, fls(valid), irq_start, - &fpga_irqdomain_ops, f); - - /* This will allocate all valid descriptors in the linear case */ - for (i = 0; i < fls(valid); i++) - if (valid & BIT(i)) { - if (!irq_start) - irq_create_mapping(f->domain, i); - f->used_irqs++; - } - - pr_info("FPGA IRQ chip %d \"%s\" @ %p, %u irqs\n", - fpga_irq_id, name, base, f->used_irqs); - - fpga_irq_id++; -} - -#ifdef CONFIG_OF -int __init fpga_irq_of_init(struct device_node *node, - struct device_node *parent) -{ - struct fpga_irq_data *f; - void __iomem *base; - u32 clear_mask; - u32 valid_mask; - - if (WARN_ON(!node)) - return -ENODEV; - - base = of_iomap(node, 0); - WARN(!base, "unable to map fpga irq registers\n"); - - if (of_property_read_u32(node, "clear-mask", &clear_mask)) - clear_mask = 0; - - if (of_property_read_u32(node, "valid-mask", &valid_mask)) - valid_mask = 0; - - fpga_irq_init(base, node->name, 0, -1, valid_mask, node); - - writel(clear_mask, base + IRQ_ENABLE_CLEAR); - writel(clear_mask, base + FIQ_ENABLE_CLEAR); - - return 0; -} -#endif diff --git a/arch/arm/plat-versatile/include/plat/fpga-irq.h b/arch/arm/plat-versatile/include/plat/fpga-irq.h deleted file mode 100644 index 1fac965..0000000 --- a/arch/arm/plat-versatile/include/plat/fpga-irq.h +++ /dev/null @@ -1,13 +0,0 @@ -#ifndef PLAT_FPGA_IRQ_H -#define PLAT_FPGA_IRQ_H - -struct device_node; -struct pt_regs; - -void fpga_handle_irq(struct pt_regs *regs); -void fpga_irq_init(void __iomem *, const char *, int, int, u32, - struct device_node *node); -int fpga_irq_of_init(struct device_node *node, - struct device_node *parent); - -#endif diff --git a/drivers/irqchip/Kconfig b/drivers/irqchip/Kconfig index 1bb8bf6..62ca575 100644 --- a/drivers/irqchip/Kconfig +++ b/drivers/irqchip/Kconfig @@ -1 +1,8 @@ -# empty +config VERSATILE_FPGA_IRQ + bool + select IRQ_DOMAIN + +config VERSATILE_FPGA_IRQ_NR + int + default 4 + depends on VERSATILE_FPGA_IRQ diff --git a/drivers/irqchip/Makefile b/drivers/irqchip/Makefile index 054321d..e2e6eb5 100644 --- a/drivers/irqchip/Makefile +++ b/drivers/irqchip/Makefile @@ -1 +1,2 @@ obj-$(CONFIG_ARCH_BCM2835) += irq-bcm2835.o +obj-$(CONFIG_VERSATILE_FPGA_IRQ) += irq-versatile-fpga.o diff --git a/drivers/irqchip/irq-versatile-fpga.c b/drivers/irqchip/irq-versatile-fpga.c new file mode 100644 index 0000000..789b3e5 --- /dev/null +++ b/drivers/irqchip/irq-versatile-fpga.c @@ -0,0 +1,204 @@ +/* + * Support for Versatile FPGA-based IRQ controllers + */ +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +#define IRQ_STATUS 0x00 +#define IRQ_RAW_STATUS 0x04 +#define IRQ_ENABLE_SET 0x08 +#define IRQ_ENABLE_CLEAR 0x0c +#define INT_SOFT_SET 0x10 +#define INT_SOFT_CLEAR 0x14 +#define FIQ_STATUS 0x20 +#define FIQ_RAW_STATUS 0x24 +#define FIQ_ENABLE 0x28 +#define FIQ_ENABLE_SET 0x28 +#define FIQ_ENABLE_CLEAR 0x2C + +/** + * struct fpga_irq_data - irq data container for the FPGA IRQ controller + * @base: memory offset in virtual memory + * @chip: chip container for this instance + * @domain: IRQ domain for this instance + * @valid: mask for valid IRQs on this controller + * @used_irqs: number of active IRQs on this controller + */ +struct fpga_irq_data { + void __iomem *base; + struct irq_chip chip; + u32 valid; + struct irq_domain *domain; + u8 used_irqs; +}; + +/* we cannot allocate memory when the controllers are initially registered */ +static struct fpga_irq_data fpga_irq_devices[CONFIG_VERSATILE_FPGA_IRQ_NR]; +static int fpga_irq_id; + +static void fpga_irq_mask(struct irq_data *d) +{ + struct fpga_irq_data *f = irq_data_get_irq_chip_data(d); + u32 mask = 1 << d->hwirq; + + writel(mask, f->base + IRQ_ENABLE_CLEAR); +} + +static void fpga_irq_unmask(struct irq_data *d) +{ + struct fpga_irq_data *f = irq_data_get_irq_chip_data(d); + u32 mask = 1 << d->hwirq; + + writel(mask, f->base + IRQ_ENABLE_SET); +} + +static void fpga_irq_handle(unsigned int irq, struct irq_desc *desc) +{ + struct fpga_irq_data *f = irq_desc_get_handler_data(desc); + u32 status = readl(f->base + IRQ_STATUS); + + if (status == 0) { + do_bad_IRQ(irq, desc); + return; + } + + do { + irq = ffs(status) - 1; + status &= ~(1 << irq); + generic_handle_irq(irq_find_mapping(f->domain, irq)); + } while (status); +} + +/* + * Handle each interrupt in a single FPGA IRQ controller. Returns non-zero + * if we've handled at least one interrupt. This does a single read of the + * status register and handles all interrupts in order from LSB first. + */ +static int handle_one_fpga(struct fpga_irq_data *f, struct pt_regs *regs) +{ + int handled = 0; + int irq; + u32 status; + + while ((status = readl(f->base + IRQ_STATUS))) { + irq = ffs(status) - 1; + handle_IRQ(irq_find_mapping(f->domain, irq), regs); + handled = 1; + } + + return handled; +} + +/* + * Keep iterating over all registered FPGA IRQ controllers until there are + * no pending interrupts. + */ +asmlinkage void __exception_irq_entry fpga_handle_irq(struct pt_regs *regs) +{ + int i, handled; + + do { + for (i = 0, handled = 0; i < fpga_irq_id; ++i) + handled |= handle_one_fpga(&fpga_irq_devices[i], regs); + } while (handled); +} + +static int fpga_irqdomain_map(struct irq_domain *d, unsigned int irq, + irq_hw_number_t hwirq) +{ + struct fpga_irq_data *f = d->host_data; + + /* Skip invalid IRQs, only register handlers for the real ones */ + if (!(f->valid & BIT(hwirq))) + return -ENOTSUPP; + irq_set_chip_data(irq, f); + irq_set_chip_and_handler(irq, &f->chip, + handle_level_irq); + set_irq_flags(irq, IRQF_VALID | IRQF_PROBE); + return 0; +} + +static struct irq_domain_ops fpga_irqdomain_ops = { + .map = fpga_irqdomain_map, + .xlate = irq_domain_xlate_onetwocell, +}; + +void __init fpga_irq_init(void __iomem *base, const char *name, int irq_start, + int parent_irq, u32 valid, struct device_node *node) +{ + struct fpga_irq_data *f; + int i; + + if (fpga_irq_id >= ARRAY_SIZE(fpga_irq_devices)) { + pr_err("%s: too few FPGA IRQ controllers, increase CONFIG_PLAT_VERSATILE_FPGA_IRQ_NR\n", __func__); + return; + } + f = &fpga_irq_devices[fpga_irq_id]; + f->base = base; + f->chip.name = name; + f->chip.irq_ack = fpga_irq_mask; + f->chip.irq_mask = fpga_irq_mask; + f->chip.irq_unmask = fpga_irq_unmask; + f->valid = valid; + + if (parent_irq != -1) { + irq_set_handler_data(parent_irq, f); + irq_set_chained_handler(parent_irq, fpga_irq_handle); + } + + /* This will also allocate irq descriptors */ + f->domain = irq_domain_add_simple(node, fls(valid), irq_start, + &fpga_irqdomain_ops, f); + + /* This will allocate all valid descriptors in the linear case */ + for (i = 0; i < fls(valid); i++) + if (valid & BIT(i)) { + if (!irq_start) + irq_create_mapping(f->domain, i); + f->used_irqs++; + } + + pr_info("FPGA IRQ chip %d \"%s\" @ %p, %u irqs\n", + fpga_irq_id, name, base, f->used_irqs); + + fpga_irq_id++; +} + +#ifdef CONFIG_OF +int __init fpga_irq_of_init(struct device_node *node, + struct device_node *parent) +{ + struct fpga_irq_data *f; + void __iomem *base; + u32 clear_mask; + u32 valid_mask; + + if (WARN_ON(!node)) + return -ENODEV; + + base = of_iomap(node, 0); + WARN(!base, "unable to map fpga irq registers\n"); + + if (of_property_read_u32(node, "clear-mask", &clear_mask)) + clear_mask = 0; + + if (of_property_read_u32(node, "valid-mask", &valid_mask)) + valid_mask = 0; + + fpga_irq_init(base, node->name, 0, -1, valid_mask, node); + + writel(clear_mask, base + IRQ_ENABLE_CLEAR); + writel(clear_mask, base + FIQ_ENABLE_CLEAR); + + return 0; +} +#endif diff --git a/include/linux/irqchip/versatile-fpga.h b/include/linux/irqchip/versatile-fpga.h new file mode 100644 index 0000000..1fac965 --- /dev/null +++ b/include/linux/irqchip/versatile-fpga.h @@ -0,0 +1,13 @@ +#ifndef PLAT_FPGA_IRQ_H +#define PLAT_FPGA_IRQ_H + +struct device_node; +struct pt_regs; + +void fpga_handle_irq(struct pt_regs *regs); +void fpga_irq_init(void __iomem *, const char *, int, int, u32, + struct device_node *node); +int fpga_irq_of_init(struct device_node *node, + struct device_node *parent); + +#endif -- cgit v0.10.2 From 3ecbf05be159a95e1d23ba9b3b21c5bc2941ba6b Mon Sep 17 00:00:00 2001 From: Pawel Moll Date: Mon, 24 Sep 2012 14:55:40 +0100 Subject: mfd: Versatile Express config infrastructure Versatile Express platform has an elaborated configuration system, consisting of microcontrollers residing on the mother- and daughterboards known as Motherboard/Daughterboard Configuration Controller (MCC and DCC). The controllers are responsible for the platform initialization (reset generation, flash programming, FPGA bitfiles loading etc.) but also control clock generators, voltage regulators, gather environmental data like temperature, power consumption etc. Even the video output switch (FPGA) is controlled that way. Those devices are _not_ visible in the main address space and the usual communication channel uses some kind of a bridge in the peripheral block sending commands (requests) to the controllers and receiving responses. It can take up to 500 microseconds for a transaction to be completed, therefore it is important to provide a non-blocking interface to it. This patch adds an abstraction of this infrastructure. Bridge drivers can register themselves with the framework. Then, a driver of a device can request an abstract "function" - the request will be redirected to a bridge referred by thedd "arm,vexpress,config-bridge" property of the device tree node. Signed-off-by: Pawel Moll diff --git a/Documentation/devicetree/bindings/arm/vexpress.txt b/Documentation/devicetree/bindings/arm/vexpress.txt index ec8b50c..5d9996b 100644 --- a/Documentation/devicetree/bindings/arm/vexpress.txt +++ b/Documentation/devicetree/bindings/arm/vexpress.txt @@ -11,6 +11,10 @@ the motherboard file using a /include/ directive. As the motherboard can be initialized in one of two different configurations ("memory maps"), care must be taken to include the correct one. + +Root node +--------- + Required properties in the root node: - compatible value: compatible = "arm,vexpress,", "arm,vexpress"; @@ -45,6 +49,10 @@ Optional properties in the root node: - Coretile Express A9x4 (V2P-CA9) HBI-0225: arm,hbi = <0x225>; + +CPU nodes +--------- + Top-level standard "cpus" node is required. It must contain a node with device_type = "cpu" property for every available core, eg.: @@ -59,6 +67,52 @@ with device_type = "cpu" property for every available core, eg.: }; }; + +Configuration infrastructure +---------------------------- + +The platform has an elaborated configuration system, consisting of +microcontrollers residing on the mother- and daughterboards known +as Motherboard/Daughterboard Configuration Controller (MCC and DCC). +The controllers are responsible for the platform initialization +(reset generation, flash programming, FPGA bitfiles loading etc.) +but also control clock generators, voltage regulators, gather +environmental data like temperature, power consumption etc. Even +the video output switch (FPGA) is controlled that way. + +Nodes describing devices controlled by this infrastructure should +point at the bridge device node: +- bridge phandle: + arm,vexpress,config-bridge = ; +This property can be also defined in a parent node (eg. for a DCC) +and is effective for all children. + + +Platform topology +----------------- + +As Versatile Express can be configured in number of physically +different setups, the device tree should describe platform topology. +Root node and main motherboard node must define the following +property, describing physical location of the children nodes: +- site number: + arm,vexpress,site = ; + where 0 means motherboard, 1 or 2 are daugtherboard sites, + 0xf means "master" site (site containing main CPU tile) +- when daughterboards are stacked on one site, their position + in the stack be be described with: + arm,vexpress,position = ; +- when describing tiles consisting more than one DCC, its number + can be described with: + arm,vexpress,dcc = ; + +Any of the numbers above defaults to zero if not defined in +the node or any of its parent. + + +Motherboard +----------- + The motherboard description file provides a single "motherboard" node using 2 address cells corresponding to the Static Memory Bus used between the motherboard and the tile. The first cell defines the Chip @@ -96,13 +150,16 @@ The tile description must define "ranges", "interrupt-map-mask" and "interrupt-map" properties to translate the motherboard's address and interrupt space into one used by the tile's processor. -Abbreviated example: + +Example of a VE tile description (simplified) +--------------------------------------------- /dts-v1/; / { model = "V2P-CA5s"; arm,hbi = <0x225>; + arm,vexpress,site = <0xf>; compatible = "arm,vexpress-v2p-ca5s", "arm,vexpress"; interrupt-parent = <&gic>; #address-cells = <1>; @@ -134,6 +191,15 @@ Abbreviated example: <0x2c000100 0x100>; }; + dcc { + compatible = "simple-bus"; + arm,vexpress,config-bridge = <&v2m_sysreg>; + + osc@0 { + compatible = "arm,vexpress-osc"; + }; + }; + motherboard { /* CS0 is visible at 0x08000000 */ ranges = <0 0 0x08000000 0x04000000>; diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig index acab3ef..637bcdf 100644 --- a/drivers/mfd/Kconfig +++ b/drivers/mfd/Kconfig @@ -1070,3 +1070,9 @@ config MCP_UCB1200_TS depends on MCP_UCB1200 && INPUT endmenu + +config VEXPRESS_CONFIG + bool + help + Platform configuration infrastructure for the ARM Ltd. + Versatile Express. diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile index d8ccb63..e807164 100644 --- a/drivers/mfd/Makefile +++ b/drivers/mfd/Makefile @@ -138,3 +138,4 @@ obj-$(CONFIG_MFD_RC5T583) += rc5t583.o rc5t583-irq.o obj-$(CONFIG_MFD_SEC_CORE) += sec-core.o sec-irq.o obj-$(CONFIG_MFD_SYSCON) += syscon.o obj-$(CONFIG_MFD_LM3533) += lm3533-core.o lm3533-ctrlbank.o +obj-$(CONFIG_VEXPRESS_CONFIG) += vexpress-config.o diff --git a/drivers/mfd/vexpress-config.c b/drivers/mfd/vexpress-config.c new file mode 100644 index 0000000..fae15d8 --- /dev/null +++ b/drivers/mfd/vexpress-config.c @@ -0,0 +1,277 @@ +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Copyright (C) 2012 ARM Limited + */ + +#define pr_fmt(fmt) "vexpress-config: " fmt + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + + +#define VEXPRESS_CONFIG_MAX_BRIDGES 2 + +struct vexpress_config_bridge { + struct device_node *node; + struct vexpress_config_bridge_info *info; + struct list_head transactions; + spinlock_t transactions_lock; +} vexpress_config_bridges[VEXPRESS_CONFIG_MAX_BRIDGES]; + +static DECLARE_BITMAP(vexpress_config_bridges_map, + ARRAY_SIZE(vexpress_config_bridges)); +static DEFINE_MUTEX(vexpress_config_bridges_mutex); + +struct vexpress_config_bridge *vexpress_config_bridge_register( + struct device_node *node, + struct vexpress_config_bridge_info *info) +{ + struct vexpress_config_bridge *bridge; + int i; + + pr_debug("Registering bridge '%s'\n", info->name); + + mutex_lock(&vexpress_config_bridges_mutex); + i = find_first_zero_bit(vexpress_config_bridges_map, + ARRAY_SIZE(vexpress_config_bridges)); + if (i >= ARRAY_SIZE(vexpress_config_bridges)) { + pr_err("Can't register more bridges!\n"); + mutex_unlock(&vexpress_config_bridges_mutex); + return NULL; + } + __set_bit(i, vexpress_config_bridges_map); + bridge = &vexpress_config_bridges[i]; + + bridge->node = node; + bridge->info = info; + INIT_LIST_HEAD(&bridge->transactions); + spin_lock_init(&bridge->transactions_lock); + + mutex_unlock(&vexpress_config_bridges_mutex); + + return bridge; +} + +void vexpress_config_bridge_unregister(struct vexpress_config_bridge *bridge) +{ + struct vexpress_config_bridge __bridge = *bridge; + int i; + + mutex_lock(&vexpress_config_bridges_mutex); + for (i = 0; i < ARRAY_SIZE(vexpress_config_bridges); i++) + if (&vexpress_config_bridges[i] == bridge) + __clear_bit(i, vexpress_config_bridges_map); + mutex_unlock(&vexpress_config_bridges_mutex); + + WARN_ON(!list_empty(&__bridge.transactions)); + while (!list_empty(&__bridge.transactions)) + cpu_relax(); +} + + +struct vexpress_config_func { + struct vexpress_config_bridge *bridge; + void *func; +}; + +struct vexpress_config_func *__vexpress_config_func_get(struct device *dev, + struct device_node *node) +{ + struct device_node *bridge_node; + struct vexpress_config_func *func; + int i; + + if (WARN_ON(dev && node && dev->of_node != node)) + return NULL; + if (dev && !node) + node = dev->of_node; + + func = kzalloc(sizeof(*func), GFP_KERNEL); + if (!func) + return NULL; + + bridge_node = of_node_get(node); + while (bridge_node) { + const __be32 *prop = of_get_property(bridge_node, + "arm,vexpress,config-bridge", NULL); + + if (prop) { + bridge_node = of_find_node_by_phandle( + be32_to_cpup(prop)); + break; + } + + bridge_node = of_get_next_parent(bridge_node); + } + + mutex_lock(&vexpress_config_bridges_mutex); + for (i = 0; i < ARRAY_SIZE(vexpress_config_bridges); i++) { + struct vexpress_config_bridge *bridge = + &vexpress_config_bridges[i]; + + if (test_bit(i, vexpress_config_bridges_map) && + bridge->node == bridge_node) { + func->bridge = bridge; + func->func = bridge->info->func_get(dev, node); + break; + } + } + mutex_unlock(&vexpress_config_bridges_mutex); + + if (!func->func) { + of_node_put(node); + kfree(func); + return NULL; + } + + return func; +} + +void vexpress_config_func_put(struct vexpress_config_func *func) +{ + func->bridge->info->func_put(func->func); + of_node_put(func->bridge->node); + kfree(func); +} + + +struct vexpress_config_trans { + struct vexpress_config_func *func; + int offset; + bool write; + u32 *data; + int status; + struct completion completion; + struct list_head list; +}; + +static void vexpress_config_dump_trans(const char *what, + struct vexpress_config_trans *trans) +{ + pr_debug("%s %s trans %p func 0x%p offset %d data 0x%x status %d\n", + what, trans->write ? "write" : "read", trans, + trans->func->func, trans->offset, + trans->data ? *trans->data : 0, trans->status); +} + +static int vexpress_config_schedule(struct vexpress_config_trans *trans) +{ + int status; + struct vexpress_config_bridge *bridge = trans->func->bridge; + unsigned long flags; + + init_completion(&trans->completion); + trans->status = -EFAULT; + + spin_lock_irqsave(&bridge->transactions_lock, flags); + + vexpress_config_dump_trans("Executing", trans); + + if (list_empty(&bridge->transactions)) + status = bridge->info->func_exec(trans->func->func, + trans->offset, trans->write, trans->data); + else + status = VEXPRESS_CONFIG_STATUS_WAIT; + + switch (status) { + case VEXPRESS_CONFIG_STATUS_DONE: + vexpress_config_dump_trans("Finished", trans); + trans->status = status; + break; + case VEXPRESS_CONFIG_STATUS_WAIT: + list_add_tail(&trans->list, &bridge->transactions); + break; + } + + spin_unlock_irqrestore(&bridge->transactions_lock, flags); + + return status; +} + +void vexpress_config_complete(struct vexpress_config_bridge *bridge, + int status) +{ + struct vexpress_config_trans *trans; + unsigned long flags; + + spin_lock_irqsave(&bridge->transactions_lock, flags); + + trans = list_first_entry(&bridge->transactions, + struct vexpress_config_trans, list); + vexpress_config_dump_trans("Completed", trans); + + trans->status = status; + list_del(&trans->list); + + if (!list_empty(&bridge->transactions)) { + vexpress_config_dump_trans("Pending", trans); + + bridge->info->func_exec(trans->func->func, trans->offset, + trans->write, trans->data); + } + spin_unlock_irqrestore(&bridge->transactions_lock, flags); + + complete(&trans->completion); +} + +int vexpress_config_wait(struct vexpress_config_trans *trans) +{ + wait_for_completion(&trans->completion); + + return trans->status; +} + + +int vexpress_config_read(struct vexpress_config_func *func, int offset, + u32 *data) +{ + struct vexpress_config_trans trans = { + .func = func, + .offset = offset, + .write = false, + .data = data, + .status = 0, + }; + int status = vexpress_config_schedule(&trans); + + if (status == VEXPRESS_CONFIG_STATUS_WAIT) + status = vexpress_config_wait(&trans); + + return status; +} +EXPORT_SYMBOL(vexpress_config_read); + +int vexpress_config_write(struct vexpress_config_func *func, int offset, + u32 data) +{ + struct vexpress_config_trans trans = { + .func = func, + .offset = offset, + .write = true, + .data = &data, + .status = 0, + }; + int status = vexpress_config_schedule(&trans); + + if (status == VEXPRESS_CONFIG_STATUS_WAIT) + status = vexpress_config_wait(&trans); + + return status; +} +EXPORT_SYMBOL(vexpress_config_write); diff --git a/include/linux/vexpress.h b/include/linux/vexpress.h new file mode 100644 index 0000000..c2d877a --- /dev/null +++ b/include/linux/vexpress.h @@ -0,0 +1,85 @@ +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Copyright (C) 2012 ARM Limited + */ + +#ifndef _LINUX_VEXPRESS_H +#define _LINUX_VEXPRESS_H + +#include + +#define VEXPRESS_SITE_MB 0 +#define VEXPRESS_SITE_DB1 1 +#define VEXPRESS_SITE_DB2 2 +#define VEXPRESS_SITE_MASTER 0xf + +#define VEXPRESS_CONFIG_STATUS_DONE 0 +#define VEXPRESS_CONFIG_STATUS_WAIT 1 + +/* Config bridge API */ + +/** + * struct vexpress_config_bridge_info - description of the platform + * configuration infrastructure bridge. + * + * @name: Bridge name + * + * @func_get: Obtains pointer to a configuration function for a given + * device or a Device Tree node, to be used with @func_put + * and @func_exec. The node pointer should take precedence + * over device pointer when both are passed. + * + * @func_put: Tells the bridge that the function will not be used any + * more, so all allocated resources can be released. + * + * @func_exec: Executes a configuration function read or write operation. + * The offset selects a 32 bit word of the value accessed. + * Must return VEXPRESS_CONFIG_STATUS_DONE when operation + * is finished immediately, VEXPRESS_CONFIG_STATUS_WAIT when + * will be completed in some time or negative value in case + * of error. + */ +struct vexpress_config_bridge_info { + const char *name; + void *(*func_get)(struct device *dev, struct device_node *node); + void (*func_put)(void *func); + int (*func_exec)(void *func, int offset, bool write, u32 *data); +}; + +struct vexpress_config_bridge; + +struct vexpress_config_bridge *vexpress_config_bridge_register( + struct device_node *node, + struct vexpress_config_bridge_info *info); +void vexpress_config_bridge_unregister(struct vexpress_config_bridge *bridge); + +void vexpress_config_complete(struct vexpress_config_bridge *bridge, + int status); + +/* Config function API */ + +struct vexpress_config_func; + +struct vexpress_config_func *__vexpress_config_func_get(struct device *dev, + struct device_node *node); +#define vexpress_config_func_get_by_dev(dev) \ + __vexpress_config_func_get(dev, NULL) +#define vexpress_config_func_get_by_node(node) \ + __vexpress_config_func_get(NULL, node) +void vexpress_config_func_put(struct vexpress_config_func *func); + +/* Both may sleep! */ +int vexpress_config_read(struct vexpress_config_func *func, int offset, + u32 *data); +int vexpress_config_write(struct vexpress_config_func *func, int offset, + u32 data); + +#endif -- cgit v0.10.2 From 88e0abcd7a8171ca7af3402373e7bd81fe9b6754 Mon Sep 17 00:00:00 2001 From: Pawel Moll Date: Tue, 18 Sep 2012 12:24:57 +0100 Subject: mfd: Versatile Express system registers driver This is a platform driver for Versatile Express' "system register" block. It's a random collection of registers providing the following functionality: - low level platform functions like board ID access; in order to use those, the driver must be initialized early, either statically or based on the DT - config bus bridge via "system control" interface; as the response from the controller does not generate interrupt (yet), the status register is periodically polled using a timer - pseudo GPIO lines providing MMC card status and Flash WP# signal control - LED interface for a set of 8 LEDs on the motherboard, with "heartbeat", "mmc0" and "cpu0" to "cpu5" as default triggers Signed-off-by: Pawel Moll diff --git a/Documentation/devicetree/bindings/arm/vexpress-sysreg.txt b/Documentation/devicetree/bindings/arm/vexpress-sysreg.txt new file mode 100644 index 0000000..9cf3f25 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/vexpress-sysreg.txt @@ -0,0 +1,50 @@ +ARM Versatile Express system registers +-------------------------------------- + +This is a system control registers block, providing multiple low level +platform functions like board detection and identification, software +interrupt generation, MMC and NOR Flash control etc. + +Required node properties: +- compatible value : = "arm,vexpress,sysreg"; +- reg : physical base address and the size of the registers window +- gpio-controller : specifies that the node is a GPIO controller +- #gpio-cells : size of the GPIO specifier, should be 2: + - first cell is the pseudo-GPIO line number: + 0 - MMC CARDIN + 1 - MMC WPROT + 2 - NOR FLASH WPn + - second cell can take standard GPIO flags (currently ignored). + +Example: + v2m_sysreg: sysreg@10000000 { + compatible = "arm,vexpress-sysreg"; + reg = <0x10000000 0x1000>; + gpio-controller; + #gpio-cells = <2>; + }; + +This block also can also act a bridge to the platform's configuration +bus via "system control" interface, addressing devices with site number, +position in the board stack, config controller, function and device +numbers - see motherboard's TRM for more details. + +The node describing a config device must refer to the sysreg node via +"arm,vexpress,config-bridge" phandle (can be also defined in the node's +parent) and relies on the board topology properties - see main vexpress +node documentation for more details. It must must also define the +following property: +- arm,vexpress-sysreg,func : must contain two cells: + - first cell defines function number (eg. 1 for clock generator, + 2 for voltage regulators etc.) + - device number (eg. osc 0, osc 1 etc.) + +Example: + mcc { + arm,vexpress,config-bridge = <&v2m_sysreg>; + + osc@0 { + compatible = "arm,vexpress-osc"; + arm,vexpress-sysreg,func = <1 0>; + }; + }; diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile index e807164..296817c 100644 --- a/drivers/mfd/Makefile +++ b/drivers/mfd/Makefile @@ -138,4 +138,4 @@ obj-$(CONFIG_MFD_RC5T583) += rc5t583.o rc5t583-irq.o obj-$(CONFIG_MFD_SEC_CORE) += sec-core.o sec-irq.o obj-$(CONFIG_MFD_SYSCON) += syscon.o obj-$(CONFIG_MFD_LM3533) += lm3533-core.o lm3533-ctrlbank.o -obj-$(CONFIG_VEXPRESS_CONFIG) += vexpress-config.o +obj-$(CONFIG_VEXPRESS_CONFIG) += vexpress-config.o vexpress-sysreg.o diff --git a/drivers/mfd/vexpress-sysreg.c b/drivers/mfd/vexpress-sysreg.c new file mode 100644 index 0000000..059d6b1 --- /dev/null +++ b/drivers/mfd/vexpress-sysreg.c @@ -0,0 +1,552 @@ +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Copyright (C) 2012 ARM Limited + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define SYS_ID 0x000 +#define SYS_SW 0x004 +#define SYS_LED 0x008 +#define SYS_100HZ 0x024 +#define SYS_FLAGS 0x030 +#define SYS_FLAGSSET 0x030 +#define SYS_FLAGSCLR 0x034 +#define SYS_NVFLAGS 0x038 +#define SYS_NVFLAGSSET 0x038 +#define SYS_NVFLAGSCLR 0x03c +#define SYS_MCI 0x048 +#define SYS_FLASH 0x04c +#define SYS_CFGSW 0x058 +#define SYS_24MHZ 0x05c +#define SYS_MISC 0x060 +#define SYS_DMA 0x064 +#define SYS_PROCID0 0x084 +#define SYS_PROCID1 0x088 +#define SYS_CFGDATA 0x0a0 +#define SYS_CFGCTRL 0x0a4 +#define SYS_CFGSTAT 0x0a8 + +#define SYS_HBI_MASK 0xfff +#define SYS_ID_HBI_SHIFT 16 +#define SYS_PROCIDx_HBI_SHIFT 0 + +#define SYS_MCI_CARDIN (1 << 0) +#define SYS_MCI_WPROT (1 << 1) + +#define SYS_FLASH_WPn (1 << 0) + +#define SYS_MISC_MASTERSITE (1 << 14) + +#define SYS_CFGCTRL_START (1 << 31) +#define SYS_CFGCTRL_WRITE (1 << 30) +#define SYS_CFGCTRL_DCC(n) (((n) & 0xf) << 26) +#define SYS_CFGCTRL_FUNC(n) (((n) & 0x3f) << 20) +#define SYS_CFGCTRL_SITE(n) (((n) & 0x3) << 16) +#define SYS_CFGCTRL_POSITION(n) (((n) & 0xf) << 12) +#define SYS_CFGCTRL_DEVICE(n) (((n) & 0xfff) << 0) + +#define SYS_CFGSTAT_ERR (1 << 1) +#define SYS_CFGSTAT_COMPLETE (1 << 0) + + +static void __iomem *vexpress_sysreg_base; +static struct device *vexpress_sysreg_dev; +static int vexpress_master_site; + + +void vexpress_flags_set(u32 data) +{ + writel(~0, vexpress_sysreg_base + SYS_FLAGSCLR); + writel(data, vexpress_sysreg_base + SYS_FLAGSSET); +} + +u32 vexpress_get_procid(int site) +{ + if (site == VEXPRESS_SITE_MASTER) + site = vexpress_master_site; + + return readl(vexpress_sysreg_base + (site == VEXPRESS_SITE_DB1 ? + SYS_PROCID0 : SYS_PROCID1)); +} + +u32 vexpress_get_hbi(int site) +{ + u32 id; + + switch (site) { + case VEXPRESS_SITE_MB: + id = readl(vexpress_sysreg_base + SYS_ID); + return (id >> SYS_ID_HBI_SHIFT) & SYS_HBI_MASK; + case VEXPRESS_SITE_MASTER: + case VEXPRESS_SITE_DB1: + case VEXPRESS_SITE_DB2: + id = vexpress_get_procid(site); + return (id >> SYS_PROCIDx_HBI_SHIFT) & SYS_HBI_MASK; + } + + return ~0; +} + +void __iomem *vexpress_get_24mhz_clock_base(void) +{ + return vexpress_sysreg_base + SYS_24MHZ; +} + + +static void vexpress_sysreg_find_prop(struct device_node *node, + const char *name, u32 *val) +{ + of_node_get(node); + while (node) { + if (of_property_read_u32(node, name, val) == 0) { + of_node_put(node); + return; + } + node = of_get_next_parent(node); + } +} + +unsigned __vexpress_get_site(struct device *dev, struct device_node *node) +{ + u32 site = 0; + + WARN_ON(dev && node && dev->of_node != node); + if (dev && !node) + node = dev->of_node; + + if (node) { + vexpress_sysreg_find_prop(node, "arm,vexpress,site", &site); + } else if (dev && dev->bus == &platform_bus_type) { + struct platform_device *pdev = to_platform_device(dev); + + if (pdev->num_resources == 1 && + pdev->resource[0].flags == IORESOURCE_BUS) + site = pdev->resource[0].start; + } else if (dev && strncmp(dev_name(dev), "ct:", 3) == 0) { + site = VEXPRESS_SITE_MASTER; + } + + if (site == VEXPRESS_SITE_MASTER) + site = vexpress_master_site; + + return site; +} + + +struct vexpress_sysreg_config_func { + u32 template; + u32 device; +}; + +static struct vexpress_config_bridge *vexpress_sysreg_config_bridge; +static struct timer_list vexpress_sysreg_config_timer; +static u32 *vexpress_sysreg_config_data; +static int vexpress_sysreg_config_tries; + +static void *vexpress_sysreg_config_func_get(struct device *dev, + struct device_node *node) +{ + struct vexpress_sysreg_config_func *config_func; + u32 site; + u32 position = 0; + u32 dcc = 0; + u32 func_device[2]; + int err = -EFAULT; + + if (node) { + of_node_get(node); + vexpress_sysreg_find_prop(node, "arm,vexpress,site", &site); + vexpress_sysreg_find_prop(node, "arm,vexpress,position", + &position); + vexpress_sysreg_find_prop(node, "arm,vexpress,dcc", &dcc); + err = of_property_read_u32_array(node, + "arm,vexpress-sysreg,func", func_device, + ARRAY_SIZE(func_device)); + of_node_put(node); + } else if (dev && dev->bus == &platform_bus_type) { + struct platform_device *pdev = to_platform_device(dev); + + if (pdev->num_resources == 1 && + pdev->resource[0].flags == IORESOURCE_BUS) { + site = pdev->resource[0].start; + func_device[0] = pdev->resource[0].end; + func_device[1] = pdev->id; + err = 0; + } + } + if (err) + return NULL; + + config_func = kzalloc(sizeof(*config_func), GFP_KERNEL); + if (!config_func) + return NULL; + + config_func->template = SYS_CFGCTRL_DCC(dcc); + config_func->template |= SYS_CFGCTRL_FUNC(func_device[0]); + config_func->template |= SYS_CFGCTRL_SITE(site == VEXPRESS_SITE_MASTER ? + vexpress_master_site : site); + config_func->template |= SYS_CFGCTRL_POSITION(position); + config_func->device |= func_device[1]; + + dev_dbg(vexpress_sysreg_dev, "func 0x%p = 0x%x, %d\n", config_func, + config_func->template, config_func->device); + + return config_func; +} + +static void vexpress_sysreg_config_func_put(void *func) +{ + kfree(func); +} + +static int vexpress_sysreg_config_func_exec(void *func, int offset, + bool write, u32 *data) +{ + int status; + struct vexpress_sysreg_config_func *config_func = func; + u32 command; + + if (WARN_ON(!vexpress_sysreg_base)) + return -ENOENT; + + command = readl(vexpress_sysreg_base + SYS_CFGCTRL); + if (WARN_ON(command & SYS_CFGCTRL_START)) + return -EBUSY; + + command = SYS_CFGCTRL_START; + command |= write ? SYS_CFGCTRL_WRITE : 0; + command |= config_func->template; + command |= SYS_CFGCTRL_DEVICE(config_func->device + offset); + + /* Use a canary for reads */ + if (!write) + *data = 0xdeadbeef; + + dev_dbg(vexpress_sysreg_dev, "command %x, data %x\n", + command, *data); + writel(*data, vexpress_sysreg_base + SYS_CFGDATA); + writel(0, vexpress_sysreg_base + SYS_CFGSTAT); + writel(command, vexpress_sysreg_base + SYS_CFGCTRL); + mb(); + + if (vexpress_sysreg_dev) { + /* Schedule completion check */ + if (!write) + vexpress_sysreg_config_data = data; + vexpress_sysreg_config_tries = 100; + mod_timer(&vexpress_sysreg_config_timer, + jiffies + usecs_to_jiffies(100)); + status = VEXPRESS_CONFIG_STATUS_WAIT; + } else { + /* Early execution, no timer available, have to spin */ + u32 cfgstat; + + do { + cpu_relax(); + cfgstat = readl(vexpress_sysreg_base + SYS_CFGSTAT); + } while (!cfgstat); + + if (!write && (cfgstat & SYS_CFGSTAT_COMPLETE)) + *data = readl(vexpress_sysreg_base + SYS_CFGDATA); + status = VEXPRESS_CONFIG_STATUS_DONE; + + if (cfgstat & SYS_CFGSTAT_ERR) + status = -EINVAL; + } + + return status; +} + +struct vexpress_config_bridge_info vexpress_sysreg_config_bridge_info = { + .name = "vexpress-sysreg", + .func_get = vexpress_sysreg_config_func_get, + .func_put = vexpress_sysreg_config_func_put, + .func_exec = vexpress_sysreg_config_func_exec, +}; + +static void vexpress_sysreg_config_complete(unsigned long data) +{ + int status = VEXPRESS_CONFIG_STATUS_DONE; + u32 cfgstat = readl(vexpress_sysreg_base + SYS_CFGSTAT); + + if (cfgstat & SYS_CFGSTAT_ERR) + status = -EINVAL; + if (!vexpress_sysreg_config_tries--) + status = -ETIMEDOUT; + + if (status < 0) { + dev_err(vexpress_sysreg_dev, "error %d\n", status); + } else if (!(cfgstat & SYS_CFGSTAT_COMPLETE)) { + mod_timer(&vexpress_sysreg_config_timer, + jiffies + usecs_to_jiffies(50)); + return; + } + + if (vexpress_sysreg_config_data) { + *vexpress_sysreg_config_data = readl(vexpress_sysreg_base + + SYS_CFGDATA); + dev_dbg(vexpress_sysreg_dev, "read data %x\n", + *vexpress_sysreg_config_data); + vexpress_sysreg_config_data = NULL; + } + + vexpress_config_complete(vexpress_sysreg_config_bridge, status); +} + + +void __init vexpress_sysreg_early_init(void __iomem *base) +{ + struct device_node *node = of_find_compatible_node(NULL, NULL, + "arm,vexpress-sysreg"); + + if (node) + base = of_iomap(node, 0); + + if (WARN_ON(!base)) + return; + + vexpress_sysreg_base = base; + + if (readl(vexpress_sysreg_base + SYS_MISC) & SYS_MISC_MASTERSITE) + vexpress_master_site = VEXPRESS_SITE_DB2; + else + vexpress_master_site = VEXPRESS_SITE_DB1; + + vexpress_sysreg_config_bridge = vexpress_config_bridge_register( + node, &vexpress_sysreg_config_bridge_info); + WARN_ON(!vexpress_sysreg_config_bridge); +} + +void __init vexpress_sysreg_of_early_init(void) +{ + vexpress_sysreg_early_init(NULL); +} + + +static struct vexpress_sysreg_gpio { + unsigned long reg; + u32 value; +} vexpress_sysreg_gpios[] = { + [VEXPRESS_GPIO_MMC_CARDIN] = { + .reg = SYS_MCI, + .value = SYS_MCI_CARDIN, + }, + [VEXPRESS_GPIO_MMC_WPROT] = { + .reg = SYS_MCI, + .value = SYS_MCI_WPROT, + }, + [VEXPRESS_GPIO_FLASH_WPn] = { + .reg = SYS_FLASH, + .value = SYS_FLASH_WPn, + }, +}; + +static int vexpress_sysreg_gpio_direction_input(struct gpio_chip *chip, + unsigned offset) +{ + return 0; +} + +static int vexpress_sysreg_gpio_direction_output(struct gpio_chip *chip, + unsigned offset, int value) +{ + return 0; +} + +static int vexpress_sysreg_gpio_get(struct gpio_chip *chip, + unsigned offset) +{ + struct vexpress_sysreg_gpio *gpio = &vexpress_sysreg_gpios[offset]; + u32 reg_value = readl(vexpress_sysreg_base + gpio->reg); + + return !!(reg_value & gpio->value); +} + +static void vexpress_sysreg_gpio_set(struct gpio_chip *chip, + unsigned offset, int value) +{ + struct vexpress_sysreg_gpio *gpio = &vexpress_sysreg_gpios[offset]; + u32 reg_value = readl(vexpress_sysreg_base + gpio->reg); + + if (value) + reg_value |= gpio->value; + else + reg_value &= ~gpio->value; + + writel(reg_value, vexpress_sysreg_base + gpio->reg); +} + +static struct gpio_chip vexpress_sysreg_gpio_chip = { + .label = "vexpress-sysreg", + .direction_input = vexpress_sysreg_gpio_direction_input, + .direction_output = vexpress_sysreg_gpio_direction_output, + .get = vexpress_sysreg_gpio_get, + .set = vexpress_sysreg_gpio_set, + .ngpio = ARRAY_SIZE(vexpress_sysreg_gpios), + .base = 0, +}; + + +static ssize_t vexpress_sysreg_sys_id_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + return sprintf(buf, "0x%08x\n", readl(vexpress_sysreg_base + SYS_ID)); +} + +DEVICE_ATTR(sys_id, S_IRUGO, vexpress_sysreg_sys_id_show, NULL); + +static int __devinit vexpress_sysreg_probe(struct platform_device *pdev) +{ + int err; + struct resource *res = platform_get_resource(pdev, + IORESOURCE_MEM, 0); + + if (!devm_request_mem_region(&pdev->dev, res->start, + resource_size(res), pdev->name)) { + dev_err(&pdev->dev, "Failed to request memory region!\n"); + return -EBUSY; + } + + if (!vexpress_sysreg_base) + vexpress_sysreg_base = devm_ioremap(&pdev->dev, res->start, + resource_size(res)); + + if (!vexpress_sysreg_base) { + dev_err(&pdev->dev, "Failed to obtain base address!\n"); + return -EFAULT; + } + + setup_timer(&vexpress_sysreg_config_timer, + vexpress_sysreg_config_complete, 0); + + vexpress_sysreg_gpio_chip.dev = &pdev->dev; + err = gpiochip_add(&vexpress_sysreg_gpio_chip); + if (err) { + vexpress_config_bridge_unregister( + vexpress_sysreg_config_bridge); + dev_err(&pdev->dev, "Failed to register GPIO chip! (%d)\n", + err); + return err; + } + + vexpress_sysreg_dev = &pdev->dev; + + device_create_file(vexpress_sysreg_dev, &dev_attr_sys_id); + + return 0; +} + +static const struct of_device_id vexpress_sysreg_match[] = { + { .compatible = "arm,vexpress-sysreg", }, + {}, +}; + +static struct platform_driver vexpress_sysreg_driver = { + .driver = { + .name = "vexpress-sysreg", + .of_match_table = vexpress_sysreg_match, + }, + .probe = vexpress_sysreg_probe, +}; + +static int __init vexpress_sysreg_init(void) +{ + return platform_driver_register(&vexpress_sysreg_driver); +} +core_initcall(vexpress_sysreg_init); + + +#if defined(CONFIG_LEDS_CLASS) + +struct vexpress_sysreg_led { + u32 mask; + struct led_classdev cdev; +} vexpress_sysreg_leds[] = { + { .mask = 1 << 0, .cdev.name = "v2m:green:user1", + .cdev.default_trigger = "heartbeat", }, + { .mask = 1 << 1, .cdev.name = "v2m:green:user2", + .cdev.default_trigger = "mmc0", }, + { .mask = 1 << 2, .cdev.name = "v2m:green:user3", + .cdev.default_trigger = "cpu0", }, + { .mask = 1 << 3, .cdev.name = "v2m:green:user4", + .cdev.default_trigger = "cpu1", }, + { .mask = 1 << 4, .cdev.name = "v2m:green:user5", + .cdev.default_trigger = "cpu2", }, + { .mask = 1 << 5, .cdev.name = "v2m:green:user6", + .cdev.default_trigger = "cpu3", }, + { .mask = 1 << 6, .cdev.name = "v2m:green:user7", + .cdev.default_trigger = "cpu4", }, + { .mask = 1 << 7, .cdev.name = "v2m:green:user8", + .cdev.default_trigger = "cpu5", }, +}; + +static DEFINE_SPINLOCK(vexpress_sysreg_leds_lock); + +static void vexpress_sysreg_led_brightness_set(struct led_classdev *cdev, + enum led_brightness brightness) +{ + struct vexpress_sysreg_led *led = container_of(cdev, + struct vexpress_sysreg_led, cdev); + unsigned long flags; + u32 val; + + spin_lock_irqsave(&vexpress_sysreg_leds_lock, flags); + + val = readl(vexpress_sysreg_base + SYS_LED); + if (brightness == LED_OFF) + val &= ~led->mask; + else + val |= led->mask; + writel(val, vexpress_sysreg_base + SYS_LED); + + spin_unlock_irqrestore(&vexpress_sysreg_leds_lock, flags); +} + +static int __init vexpress_sysreg_init_leds(void) +{ + struct vexpress_sysreg_led *led; + int i; + + /* Clear all user LEDs */ + writel(0, vexpress_sysreg_base + SYS_LED); + + for (i = 0, led = vexpress_sysreg_leds; + i < ARRAY_SIZE(vexpress_sysreg_leds); i++, led++) { + int err; + + led->cdev.brightness_set = vexpress_sysreg_led_brightness_set; + err = led_classdev_register(vexpress_sysreg_dev, &led->cdev); + if (err) { + dev_err(vexpress_sysreg_dev, + "Failed to register LED %d! (%d)\n", + i, err); + while (led--, i--) + led_classdev_unregister(&led->cdev); + return err; + } + } + + return 0; +} +device_initcall(vexpress_sysreg_init_leds); + +#endif diff --git a/include/linux/vexpress.h b/include/linux/vexpress.h index c2d877a..09c81d7 100644 --- a/include/linux/vexpress.h +++ b/include/linux/vexpress.h @@ -24,6 +24,17 @@ #define VEXPRESS_CONFIG_STATUS_DONE 0 #define VEXPRESS_CONFIG_STATUS_WAIT 1 +#define VEXPRESS_GPIO_MMC_CARDIN 0 +#define VEXPRESS_GPIO_MMC_WPROT 1 +#define VEXPRESS_GPIO_FLASH_WPn 2 + +#define VEXPRESS_RES_FUNC(_site, _func) \ +{ \ + .start = (_site), \ + .end = (_func), \ + .flags = IORESOURCE_BUS, \ +} + /* Config bridge API */ /** @@ -82,4 +93,18 @@ int vexpress_config_read(struct vexpress_config_func *func, int offset, int vexpress_config_write(struct vexpress_config_func *func, int offset, u32 data); +/* Platform control */ + +u32 vexpress_get_procid(int site); +u32 vexpress_get_hbi(int site); +void *vexpress_get_24mhz_clock_base(void); +void vexpress_flags_set(u32 data); + +#define vexpress_get_site_by_node(node) __vexpress_get_site(NULL, node) +#define vexpress_get_site_by_dev(dev) __vexpress_get_site(dev, NULL) +unsigned __vexpress_get_site(struct device *dev, struct device_node *node); + +void vexpress_sysreg_early_init(void __iomem *base); +void vexpress_sysreg_of_early_init(void); + #endif -- cgit v0.10.2 From 842839a37a9a9ac12d88930b6605c620fc09bc1d Mon Sep 17 00:00:00 2001 From: Pawel Moll Date: Mon, 17 Sep 2012 16:43:30 +0100 Subject: ARM: vexpress: Add config bus components and clocks to DTs Add description of all functions provided by Versatile Express motherboard and daughterboards configuration controllers and clock dependencies between devices. Signed-off-by: Pawel Moll diff --git a/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi b/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi index d8a827b..9a7b692 100644 --- a/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi +++ b/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi @@ -24,6 +24,7 @@ motherboard { compatible = "simple-bus"; + arm,vexpress,site = <0>; arm,v2m-memory-map = "rs1"; #address-cells = <2>; /* SMB chipselect number and offset */ #size-cells = <1>; @@ -72,14 +73,20 @@ #size-cells = <1>; ranges = <0 3 0 0x200000>; - sysreg@010000 { + v2m_sysreg: sysreg@010000 { compatible = "arm,vexpress-sysreg"; reg = <0x010000 0x1000>; + gpio-controller; + #gpio-cells = <2>; }; - sysctl@020000 { + v2m_sysctl: sysctl@020000 { compatible = "arm,sp810", "arm,primecell"; reg = <0x020000 0x1000>; + clocks = <&v2m_refclk32khz>, <&v2m_refclk1mhz>, <&smbclk>; + clock-names = "refclk", "timclk", "apb_pclk"; + #clock-cells = <1>; + clock-output-names = "timerclken0", "timerclken1", "timerclken2", "timerclken3"; }; /* PCI-E I2C bus */ @@ -100,66 +107,92 @@ compatible = "arm,pl041", "arm,primecell"; reg = <0x040000 0x1000>; interrupts = <11>; + clocks = <&smbclk>; + clock-names = "apb_pclk"; }; mmci@050000 { compatible = "arm,pl180", "arm,primecell"; reg = <0x050000 0x1000>; interrupts = <9 10>; + cd-gpios = <&v2m_sysreg 0 0>; + wp-gpios = <&v2m_sysreg 1 0>; + max-frequency = <12000000>; + vmmc-supply = <&v2m_fixed_3v3>; + clocks = <&v2m_clk24mhz>, <&smbclk>; + clock-names = "mclk", "apb_pclk"; }; kmi@060000 { compatible = "arm,pl050", "arm,primecell"; reg = <0x060000 0x1000>; interrupts = <12>; + clocks = <&v2m_clk24mhz>, <&smbclk>; + clock-names = "KMIREFCLK", "apb_pclk"; }; kmi@070000 { compatible = "arm,pl050", "arm,primecell"; reg = <0x070000 0x1000>; interrupts = <13>; + clocks = <&v2m_clk24mhz>, <&smbclk>; + clock-names = "KMIREFCLK", "apb_pclk"; }; v2m_serial0: uart@090000 { compatible = "arm,pl011", "arm,primecell"; reg = <0x090000 0x1000>; interrupts = <5>; + clocks = <&v2m_oscclk2>, <&smbclk>; + clock-names = "uartclk", "apb_pclk"; }; v2m_serial1: uart@0a0000 { compatible = "arm,pl011", "arm,primecell"; reg = <0x0a0000 0x1000>; interrupts = <6>; + clocks = <&v2m_oscclk2>, <&smbclk>; + clock-names = "uartclk", "apb_pclk"; }; v2m_serial2: uart@0b0000 { compatible = "arm,pl011", "arm,primecell"; reg = <0x0b0000 0x1000>; interrupts = <7>; + clocks = <&v2m_oscclk2>, <&smbclk>; + clock-names = "uartclk", "apb_pclk"; }; v2m_serial3: uart@0c0000 { compatible = "arm,pl011", "arm,primecell"; reg = <0x0c0000 0x1000>; interrupts = <8>; + clocks = <&v2m_oscclk2>, <&smbclk>; + clock-names = "uartclk", "apb_pclk"; }; wdt@0f0000 { compatible = "arm,sp805", "arm,primecell"; reg = <0x0f0000 0x1000>; interrupts = <0>; + clocks = <&v2m_refclk32khz>, <&smbclk>; + clock-names = "wdogclk", "apb_pclk"; }; v2m_timer01: timer@110000 { compatible = "arm,sp804", "arm,primecell"; reg = <0x110000 0x1000>; interrupts = <2>; + clocks = <&v2m_sysctl 0>, <&v2m_sysctl 1>, <&smbclk>; + clock-names = "timclken1", "timclken2", "apb_pclk"; }; v2m_timer23: timer@120000 { compatible = "arm,sp804", "arm,primecell"; reg = <0x120000 0x1000>; interrupts = <3>; + clocks = <&v2m_sysctl 2>, <&v2m_sysctl 3>, <&smbclk>; + clock-names = "timclken1", "timclken2", "apb_pclk"; }; /* DVI I2C bus */ @@ -185,6 +218,8 @@ compatible = "arm,pl031", "arm,primecell"; reg = <0x170000 0x1000>; interrupts = <4>; + clocks = <&smbclk>; + clock-names = "apb_pclk"; }; compact-flash@1a0000 { @@ -198,6 +233,8 @@ compatible = "arm,pl111", "arm,primecell"; reg = <0x1f0000 0x1000>; interrupts = <14>; + clocks = <&v2m_oscclk1>, <&smbclk>; + clock-names = "clcdclk", "apb_pclk"; }; }; @@ -208,5 +245,99 @@ regulator-max-microvolt = <3300000>; regulator-always-on; }; + + v2m_clk24mhz: clk24mhz { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <24000000>; + clock-output-names = "v2m:clk24mhz"; + }; + + v2m_refclk1mhz: refclk1mhz { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <1000000>; + clock-output-names = "v2m:refclk1mhz"; + }; + + v2m_refclk32khz: refclk32khz { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + clock-output-names = "v2m:refclk32khz"; + }; + + mcc { + compatible = "arm,vexpress,config-bus"; + arm,vexpress,config-bridge = <&v2m_sysreg>; + + osc@0 { + /* MCC static memory clock */ + compatible = "arm,vexpress-osc"; + arm,vexpress-sysreg,func = <1 0>; + freq-range = <25000000 60000000>; + #clock-cells = <0>; + clock-output-names = "v2m:oscclk0"; + }; + + v2m_oscclk1: osc@1 { + /* CLCD clock */ + compatible = "arm,vexpress-osc"; + arm,vexpress-sysreg,func = <1 1>; + freq-range = <23750000 63500000>; + #clock-cells = <0>; + clock-output-names = "v2m:oscclk1"; + }; + + v2m_oscclk2: osc@2 { + /* IO FPGA peripheral clock */ + compatible = "arm,vexpress-osc"; + arm,vexpress-sysreg,func = <1 2>; + freq-range = <24000000 24000000>; + #clock-cells = <0>; + clock-output-names = "v2m:oscclk2"; + }; + + volt@0 { + /* Logic level voltage */ + compatible = "arm,vexpress-volt"; + arm,vexpress-sysreg,func = <2 0>; + regulator-name = "VIO"; + regulator-always-on; + label = "VIO"; + }; + + temp@0 { + /* MCC internal operating temperature */ + compatible = "arm,vexpress-temp"; + arm,vexpress-sysreg,func = <4 0>; + label = "MCC"; + }; + + reset@0 { + compatible = "arm,vexpress-reset"; + arm,vexpress-sysreg,func = <5 0>; + }; + + muxfpga@0 { + compatible = "arm,vexpress-muxfpga"; + arm,vexpress-sysreg,func = <7 0>; + }; + + shutdown@0 { + compatible = "arm,vexpress-shutdown"; + arm,vexpress-sysreg,func = <8 0>; + }; + + reboot@0 { + compatible = "arm,vexpress-reboot"; + arm,vexpress-sysreg,func = <9 0>; + }; + + dvimode@0 { + compatible = "arm,vexpress-dvimode"; + arm,vexpress-sysreg,func = <11 0>; + }; + }; }; }; diff --git a/arch/arm/boot/dts/vexpress-v2m.dtsi b/arch/arm/boot/dts/vexpress-v2m.dtsi index dba53fd..4d321a8 100644 --- a/arch/arm/boot/dts/vexpress-v2m.dtsi +++ b/arch/arm/boot/dts/vexpress-v2m.dtsi @@ -24,6 +24,7 @@ motherboard { compatible = "simple-bus"; + arm,vexpress,site = <0>; #address-cells = <2>; /* SMB chipselect number and offset */ #size-cells = <1>; #interrupt-cells = <1>; @@ -71,14 +72,20 @@ #size-cells = <1>; ranges = <0 7 0 0x20000>; - sysreg@00000 { + v2m_sysreg: sysreg@00000 { compatible = "arm,vexpress-sysreg"; reg = <0x00000 0x1000>; + gpio-controller; + #gpio-cells = <2>; }; - sysctl@01000 { + v2m_sysctl: sysctl@01000 { compatible = "arm,sp810", "arm,primecell"; reg = <0x01000 0x1000>; + clocks = <&v2m_refclk32khz>, <&v2m_refclk1mhz>, <&smbclk>; + clock-names = "refclk", "timclk", "apb_pclk"; + #clock-cells = <1>; + clock-output-names = "timerclken0", "timerclken1", "timerclken2", "timerclken3"; }; /* PCI-E I2C bus */ @@ -99,66 +106,92 @@ compatible = "arm,pl041", "arm,primecell"; reg = <0x04000 0x1000>; interrupts = <11>; + clocks = <&smbclk>; + clock-names = "apb_pclk"; }; mmci@05000 { compatible = "arm,pl180", "arm,primecell"; reg = <0x05000 0x1000>; interrupts = <9 10>; + cd-gpios = <&v2m_sysreg 0 0>; + wp-gpios = <&v2m_sysreg 1 0>; + max-frequency = <12000000>; + vmmc-supply = <&v2m_fixed_3v3>; + clocks = <&v2m_clk24mhz>, <&smbclk>; + clock-names = "mclk", "apb_pclk"; }; kmi@06000 { compatible = "arm,pl050", "arm,primecell"; reg = <0x06000 0x1000>; interrupts = <12>; + clocks = <&v2m_clk24mhz>, <&smbclk>; + clock-names = "KMIREFCLK", "apb_pclk"; }; kmi@07000 { compatible = "arm,pl050", "arm,primecell"; reg = <0x07000 0x1000>; interrupts = <13>; + clocks = <&v2m_clk24mhz>, <&smbclk>; + clock-names = "KMIREFCLK", "apb_pclk"; }; v2m_serial0: uart@09000 { compatible = "arm,pl011", "arm,primecell"; reg = <0x09000 0x1000>; interrupts = <5>; + clocks = <&v2m_oscclk2>, <&smbclk>; + clock-names = "uartclk", "apb_pclk"; }; v2m_serial1: uart@0a000 { compatible = "arm,pl011", "arm,primecell"; reg = <0x0a000 0x1000>; interrupts = <6>; + clocks = <&v2m_oscclk2>, <&smbclk>; + clock-names = "uartclk", "apb_pclk"; }; v2m_serial2: uart@0b000 { compatible = "arm,pl011", "arm,primecell"; reg = <0x0b000 0x1000>; interrupts = <7>; + clocks = <&v2m_oscclk2>, <&smbclk>; + clock-names = "uartclk", "apb_pclk"; }; v2m_serial3: uart@0c000 { compatible = "arm,pl011", "arm,primecell"; reg = <0x0c000 0x1000>; interrupts = <8>; + clocks = <&v2m_oscclk2>, <&smbclk>; + clock-names = "uartclk", "apb_pclk"; }; wdt@0f000 { compatible = "arm,sp805", "arm,primecell"; reg = <0x0f000 0x1000>; interrupts = <0>; + clocks = <&v2m_refclk32khz>, <&smbclk>; + clock-names = "wdogclk", "apb_pclk"; }; v2m_timer01: timer@11000 { compatible = "arm,sp804", "arm,primecell"; reg = <0x11000 0x1000>; interrupts = <2>; + clocks = <&v2m_sysctl 0>, <&v2m_sysctl 1>, <&smbclk>; + clock-names = "timclken1", "timclken2", "apb_pclk"; }; v2m_timer23: timer@12000 { compatible = "arm,sp804", "arm,primecell"; reg = <0x12000 0x1000>; interrupts = <3>; + clocks = <&v2m_sysctl 2>, <&v2m_sysctl 3>, <&smbclk>; + clock-names = "timclken1", "timclken2", "apb_pclk"; }; /* DVI I2C bus */ @@ -184,6 +217,8 @@ compatible = "arm,pl031", "arm,primecell"; reg = <0x17000 0x1000>; interrupts = <4>; + clocks = <&smbclk>; + clock-names = "apb_pclk"; }; compact-flash@1a000 { @@ -197,6 +232,8 @@ compatible = "arm,pl111", "arm,primecell"; reg = <0x1f000 0x1000>; interrupts = <14>; + clocks = <&v2m_oscclk1>, <&smbclk>; + clock-names = "clcdclk", "apb_pclk"; }; }; @@ -207,5 +244,99 @@ regulator-max-microvolt = <3300000>; regulator-always-on; }; + + v2m_clk24mhz: clk24mhz { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <24000000>; + clock-output-names = "v2m:clk24mhz"; + }; + + v2m_refclk1mhz: refclk1mhz { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <1000000>; + clock-output-names = "v2m:refclk1mhz"; + }; + + v2m_refclk32khz: refclk32khz { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + clock-output-names = "v2m:refclk32khz"; + }; + + mcc { + compatible = "arm,vexpress,config-bus"; + arm,vexpress,config-bridge = <&v2m_sysreg>; + + osc@0 { + /* MCC static memory clock */ + compatible = "arm,vexpress-osc"; + arm,vexpress-sysreg,func = <1 0>; + freq-range = <25000000 60000000>; + #clock-cells = <0>; + clock-output-names = "v2m:oscclk0"; + }; + + v2m_oscclk1: osc@1 { + /* CLCD clock */ + compatible = "arm,vexpress-osc"; + arm,vexpress-sysreg,func = <1 1>; + freq-range = <23750000 63500000>; + #clock-cells = <0>; + clock-output-names = "v2m:oscclk1"; + }; + + v2m_oscclk2: osc@2 { + /* IO FPGA peripheral clock */ + compatible = "arm,vexpress-osc"; + arm,vexpress-sysreg,func = <1 2>; + freq-range = <24000000 24000000>; + #clock-cells = <0>; + clock-output-names = "v2m:oscclk2"; + }; + + volt@0 { + /* Logic level voltage */ + compatible = "arm,vexpress-volt"; + arm,vexpress-sysreg,func = <2 0>; + regulator-name = "VIO"; + regulator-always-on; + label = "VIO"; + }; + + temp@0 { + /* MCC internal operating temperature */ + compatible = "arm,vexpress-temp"; + arm,vexpress-sysreg,func = <4 0>; + label = "MCC"; + }; + + reset@0 { + compatible = "arm,vexpress-reset"; + arm,vexpress-sysreg,func = <5 0>; + }; + + muxfpga@0 { + compatible = "arm,vexpress-muxfpga"; + arm,vexpress-sysreg,func = <7 0>; + }; + + shutdown@0 { + compatible = "arm,vexpress-shutdown"; + arm,vexpress-sysreg,func = <8 0>; + }; + + reboot@0 { + compatible = "arm,vexpress-reboot"; + arm,vexpress-sysreg,func = <9 0>; + }; + + dvimode@0 { + compatible = "arm,vexpress-dvimode"; + arm,vexpress-sysreg,func = <11 0>; + }; + }; }; }; diff --git a/arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts b/arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts index d12b34c..4bbed10 100644 --- a/arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts +++ b/arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts @@ -12,6 +12,7 @@ / { model = "V2P-CA15"; arm,hbi = <0x237>; + arm,vexpress,site = <0xf>; compatible = "arm,vexpress,v2p-ca15,tc1", "arm,vexpress,v2p-ca15", "arm,vexpress"; interrupt-parent = <&gic>; #address-cells = <2>; @@ -54,17 +55,24 @@ compatible = "arm,hdlcd"; reg = <0 0x2b000000 0 0x1000>; interrupts = <0 85 4>; + clocks = <&oscclk5>; + clock-names = "pxlclk"; }; memory-controller@2b0a0000 { compatible = "arm,pl341", "arm,primecell"; reg = <0 0x2b0a0000 0 0x1000>; + clocks = <&oscclk7>; + clock-names = "apb_pclk"; }; wdt@2b060000 { compatible = "arm,sp805", "arm,primecell"; + status = "disabled"; reg = <0 0x2b060000 0 0x1000>; interrupts = <98>; + clocks = <&oscclk7>; + clock-names = "apb_pclk"; }; gic: interrupt-controller@2c001000 { @@ -84,6 +92,8 @@ reg = <0 0x7ffd0000 0 0x1000>; interrupts = <0 86 4>, <0 87 4>; + clocks = <&oscclk7>; + clock-names = "apb_pclk"; }; dma@7ffb0000 { @@ -94,6 +104,8 @@ <0 89 4>, <0 90 4>, <0 91 4>; + clocks = <&oscclk7>; + clock-names = "apb_pclk"; }; timer { @@ -110,6 +122,104 @@ <0 69 4>; }; + dcc { + compatible = "arm,vexpress,config-bus"; + arm,vexpress,config-bridge = <&v2m_sysreg>; + + osc@0 { + /* CPU PLL reference clock */ + compatible = "arm,vexpress-osc"; + arm,vexpress-sysreg,func = <1 0>; + freq-range = <50000000 60000000>; + #clock-cells = <0>; + clock-output-names = "oscclk0"; + }; + + osc@4 { + /* Multiplexed AXI master clock */ + compatible = "arm,vexpress-osc"; + arm,vexpress-sysreg,func = <1 4>; + freq-range = <20000000 40000000>; + #clock-cells = <0>; + clock-output-names = "oscclk4"; + }; + + oscclk5: osc@5 { + /* HDLCD PLL reference clock */ + compatible = "arm,vexpress-osc"; + arm,vexpress-sysreg,func = <1 5>; + freq-range = <23750000 165000000>; + #clock-cells = <0>; + clock-output-names = "oscclk5"; + }; + + smbclk: osc@6 { + /* SMB clock */ + compatible = "arm,vexpress-osc"; + arm,vexpress-sysreg,func = <1 6>; + freq-range = <20000000 50000000>; + #clock-cells = <0>; + clock-output-names = "oscclk6"; + }; + + oscclk7: osc@7 { + /* SYS PLL reference clock */ + compatible = "arm,vexpress-osc"; + arm,vexpress-sysreg,func = <1 7>; + freq-range = <20000000 60000000>; + #clock-cells = <0>; + clock-output-names = "oscclk7"; + }; + + osc@8 { + /* DDR2 PLL reference clock */ + compatible = "arm,vexpress-osc"; + arm,vexpress-sysreg,func = <1 8>; + freq-range = <40000000 40000000>; + #clock-cells = <0>; + clock-output-names = "oscclk8"; + }; + + volt@0 { + /* CPU core voltage */ + compatible = "arm,vexpress-volt"; + arm,vexpress-sysreg,func = <2 0>; + regulator-name = "Cores"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1050000>; + regulator-always-on; + label = "Cores"; + }; + + amp@0 { + /* Total current for the two cores */ + compatible = "arm,vexpress-amp"; + arm,vexpress-sysreg,func = <3 0>; + label = "Cores"; + }; + + temp@0 { + /* DCC internal temperature */ + compatible = "arm,vexpress-temp"; + arm,vexpress-sysreg,func = <4 0>; + label = "DCC"; + }; + + power@0 { + /* Total power */ + compatible = "arm,vexpress-power"; + arm,vexpress-sysreg,func = <12 0>; + label = "Cores"; + }; + + energy@0 { + /* Total energy */ + compatible = "arm,vexpress-energy"; + arm,vexpress-sysreg,func = <13 0>; + label = "Cores"; + }; + }; + motherboard { ranges = <0 0 0 0x08000000 0x04000000>, <1 0 0 0x14000000 0x04000000>, diff --git a/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts b/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts index 4890a81..3f4e1d0 100644 --- a/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts +++ b/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts @@ -12,6 +12,7 @@ / { model = "V2P-CA15_CA7"; arm,hbi = <0x249>; + arm,vexpress,site = <0xf>; compatible = "arm,vexpress,v2p-ca15_a7", "arm,vexpress"; interrupt-parent = <&gic>; #address-cells = <2>; @@ -74,17 +75,23 @@ compatible = "arm,sp805", "arm,primecell"; reg = <0 0x2a490000 0 0x1000>; interrupts = <98>; + clocks = <&oscclk6a>, <&oscclk6a>; + clock-names = "wdogclk", "apb_pclk"; }; hdlcd@2b000000 { compatible = "arm,hdlcd"; reg = <0 0x2b000000 0 0x1000>; interrupts = <0 85 4>; + clocks = <&oscclk5>; + clock-names = "pxlclk"; }; memory-controller@2b0a0000 { compatible = "arm,pl341", "arm,primecell"; reg = <0 0x2b0a0000 0 0x1000>; + clocks = <&oscclk6a>; + clock-names = "apb_pclk"; }; gic: interrupt-controller@2c001000 { @@ -104,6 +111,8 @@ reg = <0 0x7ffd0000 0 0x1000>; interrupts = <0 86 4>, <0 87 4>; + clocks = <&oscclk6a>; + clock-names = "apb_pclk"; }; dma@7ff00000 { @@ -114,6 +123,8 @@ <0 89 4>, <0 90 4>, <0 91 4>; + clocks = <&oscclk6a>; + clock-names = "apb_pclk"; }; timer { @@ -130,6 +141,170 @@ <0 69 4>; }; + oscclk6a: oscclk6a { + /* Reference 24MHz clock */ + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <24000000>; + clock-output-names = "oscclk6a"; + }; + + dcc { + compatible = "arm,vexpress,config-bus"; + arm,vexpress,config-bridge = <&v2m_sysreg>; + + osc@0 { + /* A15 PLL 0 reference clock */ + compatible = "arm,vexpress-osc"; + arm,vexpress-sysreg,func = <1 0>; + freq-range = <17000000 50000000>; + #clock-cells = <0>; + clock-output-names = "oscclk0"; + }; + + osc@1 { + /* A15 PLL 1 reference clock */ + compatible = "arm,vexpress-osc"; + arm,vexpress-sysreg,func = <1 1>; + freq-range = <17000000 50000000>; + #clock-cells = <0>; + clock-output-names = "oscclk1"; + }; + + osc@2 { + /* A7 PLL 0 reference clock */ + compatible = "arm,vexpress-osc"; + arm,vexpress-sysreg,func = <1 2>; + freq-range = <17000000 50000000>; + #clock-cells = <0>; + clock-output-names = "oscclk2"; + }; + + osc@3 { + /* A7 PLL 1 reference clock */ + compatible = "arm,vexpress-osc"; + arm,vexpress-sysreg,func = <1 3>; + freq-range = <17000000 50000000>; + #clock-cells = <0>; + clock-output-names = "oscclk3"; + }; + + osc@4 { + /* External AXI master clock */ + compatible = "arm,vexpress-osc"; + arm,vexpress-sysreg,func = <1 4>; + freq-range = <20000000 40000000>; + #clock-cells = <0>; + clock-output-names = "oscclk4"; + }; + + oscclk5: osc@5 { + /* HDLCD PLL reference clock */ + compatible = "arm,vexpress-osc"; + arm,vexpress-sysreg,func = <1 5>; + freq-range = <23750000 165000000>; + #clock-cells = <0>; + clock-output-names = "oscclk5"; + }; + + smbclk: osc@6 { + /* Static memory controller clock */ + compatible = "arm,vexpress-osc"; + arm,vexpress-sysreg,func = <1 6>; + freq-range = <20000000 40000000>; + #clock-cells = <0>; + clock-output-names = "oscclk6"; + }; + + osc@7 { + /* SYS PLL reference clock */ + compatible = "arm,vexpress-osc"; + arm,vexpress-sysreg,func = <1 7>; + freq-range = <17000000 50000000>; + #clock-cells = <0>; + clock-output-names = "oscclk7"; + }; + + osc@8 { + /* DDR2 PLL reference clock */ + compatible = "arm,vexpress-osc"; + arm,vexpress-sysreg,func = <1 8>; + freq-range = <20000000 50000000>; + #clock-cells = <0>; + clock-output-names = "oscclk8"; + }; + + volt@0 { + /* A15 CPU core voltage */ + compatible = "arm,vexpress-volt"; + arm,vexpress-sysreg,func = <2 0>; + regulator-name = "A15 Vcore"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1050000>; + regulator-always-on; + label = "A15 Vcore"; + }; + + volt@1 { + /* A7 CPU core voltage */ + compatible = "arm,vexpress-volt"; + arm,vexpress-sysreg,func = <2 1>; + regulator-name = "A7 Vcore"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1050000>; + regulator-always-on; + label = "A7 Vcore"; + }; + + amp@0 { + /* Total current for the two A15 cores */ + compatible = "arm,vexpress-amp"; + arm,vexpress-sysreg,func = <3 0>; + label = "A15 Icore"; + }; + + amp@1 { + /* Total current for the three A7 cores */ + compatible = "arm,vexpress-amp"; + arm,vexpress-sysreg,func = <3 1>; + label = "A7 Icore"; + }; + + temp@0 { + /* DCC internal temperature */ + compatible = "arm,vexpress-temp"; + arm,vexpress-sysreg,func = <4 0>; + label = "DCC"; + }; + + power@0 { + /* Total power for the two A15 cores */ + compatible = "arm,vexpress-power"; + arm,vexpress-sysreg,func = <12 0>; + label = "A15 Pcore"; + }; + power@1 { + /* Total power for the three A7 cores */ + compatible = "arm,vexpress-power"; + arm,vexpress-sysreg,func = <12 1>; + label = "A7 Pcore"; + }; + + energy@0 { + /* Total energy for the two A15 cores */ + compatible = "arm,vexpress-energy"; + arm,vexpress-sysreg,func = <13 0>; + label = "A15 Jcore"; + }; + + energy@2 { + /* Total energy for the three A7 cores */ + compatible = "arm,vexpress-energy"; + arm,vexpress-sysreg,func = <13 2>; + label = "A7 Jcore"; + }; + }; + motherboard { ranges = <0 0 0 0x08000000 0x04000000>, <1 0 0 0x14000000 0x04000000>, diff --git a/arch/arm/boot/dts/vexpress-v2p-ca5s.dts b/arch/arm/boot/dts/vexpress-v2p-ca5s.dts index 18917a0..f3c1f2a 100644 --- a/arch/arm/boot/dts/vexpress-v2p-ca5s.dts +++ b/arch/arm/boot/dts/vexpress-v2p-ca5s.dts @@ -12,6 +12,7 @@ / { model = "V2P-CA5s"; arm,hbi = <0x225>; + arm,vexpress,site = <0xf>; compatible = "arm,vexpress,v2p-ca5s", "arm,vexpress"; interrupt-parent = <&gic>; #address-cells = <1>; @@ -56,11 +57,15 @@ compatible = "arm,hdlcd"; reg = <0x2a110000 0x1000>; interrupts = <0 85 4>; + clocks = <&oscclk3>; + clock-names = "pxlclk"; }; memory-controller@2a150000 { compatible = "arm,pl341", "arm,primecell"; reg = <0x2a150000 0x1000>; + clocks = <&oscclk1>; + clock-names = "apb_pclk"; }; memory-controller@2a190000 { @@ -68,6 +73,8 @@ reg = <0x2a190000 0x1000>; interrupts = <0 86 4>, <0 87 4>; + clocks = <&oscclk1>; + clock-names = "apb_pclk"; }; scu@2c000000 { @@ -109,6 +116,72 @@ <0 69 4>; }; + dcc { + compatible = "arm,vexpress,config-bus"; + arm,vexpress,config-bridge = <&v2m_sysreg>; + + osc@0 { + /* CPU and internal AXI reference clock */ + compatible = "arm,vexpress-osc"; + arm,vexpress-sysreg,func = <1 0>; + freq-range = <50000000 100000000>; + #clock-cells = <0>; + clock-output-names = "oscclk0"; + }; + + oscclk1: osc@1 { + /* Multiplexed AXI master clock */ + compatible = "arm,vexpress-osc"; + arm,vexpress-sysreg,func = <1 1>; + freq-range = <5000000 50000000>; + #clock-cells = <0>; + clock-output-names = "oscclk1"; + }; + + osc@2 { + /* DDR2 */ + compatible = "arm,vexpress-osc"; + arm,vexpress-sysreg,func = <1 2>; + freq-range = <80000000 120000000>; + #clock-cells = <0>; + clock-output-names = "oscclk2"; + }; + + oscclk3: osc@3 { + /* HDLCD */ + compatible = "arm,vexpress-osc"; + arm,vexpress-sysreg,func = <1 3>; + freq-range = <23750000 165000000>; + #clock-cells = <0>; + clock-output-names = "oscclk3"; + }; + + osc@4 { + /* Test chip gate configuration */ + compatible = "arm,vexpress-osc"; + arm,vexpress-sysreg,func = <1 4>; + freq-range = <80000000 80000000>; + #clock-cells = <0>; + clock-output-names = "oscclk4"; + }; + + smbclk: osc@5 { + /* SMB clock */ + compatible = "arm,vexpress-osc"; + arm,vexpress-sysreg,func = <1 5>; + freq-range = <25000000 60000000>; + #clock-cells = <0>; + clock-output-names = "oscclk5"; + }; + + temp@0 { + /* DCC internal operating temperature */ + compatible = "arm,vexpress-temp"; + arm,vexpress-sysreg,func = <4 0>; + label = "DCC"; + }; + }; + motherboard { ranges = <0 0 0x08000000 0x04000000>, <1 0 0x14000000 0x04000000>, diff --git a/arch/arm/boot/dts/vexpress-v2p-ca9.dts b/arch/arm/boot/dts/vexpress-v2p-ca9.dts index 3f0c736..005259d 100644 --- a/arch/arm/boot/dts/vexpress-v2p-ca9.dts +++ b/arch/arm/boot/dts/vexpress-v2p-ca9.dts @@ -12,6 +12,7 @@ / { model = "V2P-CA9"; arm,hbi = <0x191>; + arm,vexpress,site = <0xf>; compatible = "arm,vexpress,v2p-ca9", "arm,vexpress"; interrupt-parent = <&gic>; #address-cells = <1>; @@ -70,11 +71,15 @@ compatible = "arm,pl111", "arm,primecell"; reg = <0x10020000 0x1000>; interrupts = <0 44 4>; + clocks = <&oscclk1>, <&oscclk2>; + clock-names = "clcdclk", "apb_pclk"; }; memory-controller@100e0000 { compatible = "arm,pl341", "arm,primecell"; reg = <0x100e0000 0x1000>; + clocks = <&oscclk2>; + clock-names = "apb_pclk"; }; memory-controller@100e1000 { @@ -82,6 +87,8 @@ reg = <0x100e1000 0x1000>; interrupts = <0 45 4>, <0 46 4>; + clocks = <&oscclk2>; + clock-names = "apb_pclk"; }; timer@100e4000 { @@ -89,12 +96,16 @@ reg = <0x100e4000 0x1000>; interrupts = <0 48 4>, <0 49 4>; + clocks = <&oscclk2>, <&oscclk2>; + clock-names = "timclk", "apb_pclk"; }; watchdog@100e5000 { compatible = "arm,sp805", "arm,primecell"; reg = <0x100e5000 0x1000>; interrupts = <0 51 4>; + clocks = <&oscclk2>, <&oscclk2>; + clock-names = "wdogclk", "apb_pclk"; }; scu@1e000000 { @@ -140,6 +151,120 @@ <0 63 4>; }; + dcc { + compatible = "arm,vexpress,config-bus"; + arm,vexpress,config-bridge = <&v2m_sysreg>; + + osc@0 { + /* ACLK clock to the AXI master port on the test chip */ + compatible = "arm,vexpress-osc"; + arm,vexpress-sysreg,func = <1 0>; + freq-range = <30000000 50000000>; + #clock-cells = <0>; + clock-output-names = "extsaxiclk"; + }; + + oscclk1: osc@1 { + /* Reference clock for the CLCD */ + compatible = "arm,vexpress-osc"; + arm,vexpress-sysreg,func = <1 1>; + freq-range = <10000000 80000000>; + #clock-cells = <0>; + clock-output-names = "clcdclk"; + }; + + smbclk: oscclk2: osc@2 { + /* Reference clock for the test chip internal PLLs */ + compatible = "arm,vexpress-osc"; + arm,vexpress-sysreg,func = <1 2>; + freq-range = <33000000 100000000>; + #clock-cells = <0>; + clock-output-names = "tcrefclk"; + }; + + volt@0 { + /* Test Chip internal logic voltage */ + compatible = "arm,vexpress-volt"; + arm,vexpress-sysreg,func = <2 0>; + regulator-name = "VD10"; + regulator-always-on; + label = "VD10"; + }; + + volt@1 { + /* PL310, L2 cache, RAM cell supply (not PL310 logic) */ + compatible = "arm,vexpress-volt"; + arm,vexpress-sysreg,func = <2 1>; + regulator-name = "VD10_S2"; + regulator-always-on; + label = "VD10_S2"; + }; + + volt@2 { + /* Cortex-A9 system supply, Cores, MPEs, SCU and PL310 logic */ + compatible = "arm,vexpress-volt"; + arm,vexpress-sysreg,func = <2 2>; + regulator-name = "VD10_S3"; + regulator-always-on; + label = "VD10_S3"; + }; + + volt@3 { + /* DDR2 SDRAM and Test Chip DDR2 I/O supply */ + compatible = "arm,vexpress-volt"; + arm,vexpress-sysreg,func = <2 3>; + regulator-name = "VCC1V8"; + regulator-always-on; + label = "VCC1V8"; + }; + + volt@4 { + /* DDR2 SDRAM VTT termination voltage */ + compatible = "arm,vexpress-volt"; + arm,vexpress-sysreg,func = <2 4>; + regulator-name = "DDR2VTT"; + regulator-always-on; + label = "DDR2VTT"; + }; + + volt@5 { + /* Local board supply for miscellaneous logic external to the Test Chip */ + arm,vexpress-sysreg,func = <2 5>; + compatible = "arm,vexpress-volt"; + regulator-name = "VCC3V3"; + regulator-always-on; + label = "VCC3V3"; + }; + + amp@0 { + /* PL310, L2 cache, RAM cell supply (not PL310 logic) */ + compatible = "arm,vexpress-amp"; + arm,vexpress-sysreg,func = <3 0>; + label = "VD10_S2"; + }; + + amp@1 { + /* Cortex-A9 system supply, Cores, MPEs, SCU and PL310 logic */ + compatible = "arm,vexpress-amp"; + arm,vexpress-sysreg,func = <3 1>; + label = "VD10_S3"; + }; + + power@0 { + /* PL310, L2 cache, RAM cell supply (not PL310 logic) */ + compatible = "arm,vexpress-power"; + arm,vexpress-sysreg,func = <12 0>; + label = "PVD10_S2"; + }; + + power@1 { + /* Cortex-A9 system supply, Cores, MPEs, SCU and PL310 logic */ + compatible = "arm,vexpress-power"; + arm,vexpress-sysreg,func = <12 1>; + label = "PVD10_S3"; + }; + }; + motherboard { ranges = <0 0 0x40000000 0x04000000>, <1 0 0x44000000 0x04000000>, -- cgit v0.10.2 From 38669e045dbf8f62a008898a7fb1e93975b3817c Mon Sep 17 00:00:00 2001 From: Pawel Moll Date: Tue, 9 Oct 2012 12:56:36 +0100 Subject: ARM: vexpress: Start using new Versatile Express infrastructure This patch starts using all the configuration infrastructure. - generic GPIO library is forced now - sysreg GPIOs are used as MMC CD and WP information sources; thanks to this MMCI auxiliary data is not longer necessary - DVI muxer and mode control is removed from non-DT V2P-CA9 code as this is now handled by the vexpress-dvi driver - clock generators control is removed as is being handled by the common clock driver now - the sysreg and sysctl control is now delegated to the appropriate drivers and all related code was removed - NOR Flash set_vpp function has been removed as the control bit used does _not_ control its VPP line, but the #WP signal instead (which is de facto unusable in case of Linux MTD drivers); this also allowed the remove its DT auxiliary data The non-DT code defines only minimal required number of the config devices. Device Trees are updated to make use of all new features. Signed-off-by: Pawel Moll diff --git a/arch/arm/include/asm/hardware/sp810.h b/arch/arm/include/asm/hardware/sp810.h index afd7e91..6636430 100644 --- a/arch/arm/include/asm/hardware/sp810.h +++ b/arch/arm/include/asm/hardware/sp810.h @@ -50,12 +50,6 @@ #define SCPCELLID2 0xFF8 #define SCPCELLID3 0xFFC -#define SCCTRL_TIMEREN0SEL_REFCLK (0 << 15) -#define SCCTRL_TIMEREN0SEL_TIMCLK (1 << 15) - -#define SCCTRL_TIMEREN1SEL_REFCLK (0 << 17) -#define SCCTRL_TIMEREN1SEL_TIMCLK (1 << 17) - #define SCCTRL_TIMERENnSEL_SHIFT(n) (15 + ((n) * 2)) static inline void sysctl_soft_reset(void __iomem *base) diff --git a/arch/arm/mach-vexpress/Kconfig b/arch/arm/mach-vexpress/Kconfig index c952960..99e63f5 100644 --- a/arch/arm/mach-vexpress/Kconfig +++ b/arch/arm/mach-vexpress/Kconfig @@ -1,11 +1,12 @@ config ARCH_VEXPRESS bool "ARM Ltd. Versatile Express family" if ARCH_MULTI_V7 - select ARCH_WANT_OPTIONAL_GPIOLIB + select ARCH_REQUIRE_GPIOLIB select ARM_AMBA select ARM_GIC select ARM_TIMER_SP804 select CLKDEV_LOOKUP select COMMON_CLK + select COMMON_CLK_VERSATILE select CPU_V7 select GENERIC_CLOCKEVENTS select HAVE_CLK @@ -17,6 +18,7 @@ config ARCH_VEXPRESS select PLAT_VERSATILE select PLAT_VERSATILE_CLCD select REGULATOR_FIXED_VOLTAGE if REGULATOR + select VEXPRESS_CONFIG help This option enables support for systems using Cortex processor based ARM core and logic (FPGA) tiles on the Versatile Express motherboard, diff --git a/arch/arm/mach-vexpress/Makefile b/arch/arm/mach-vexpress/Makefile index 42703e8..80b6497 100644 --- a/arch/arm/mach-vexpress/Makefile +++ b/arch/arm/mach-vexpress/Makefile @@ -4,7 +4,7 @@ ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/$(src)/include \ -I$(srctree)/arch/arm/plat-versatile/include -obj-y := v2m.o +obj-y := v2m.o reset.o obj-$(CONFIG_ARCH_VEXPRESS_CA9X4) += ct-ca9x4.o obj-$(CONFIG_SMP) += platsmp.o obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o diff --git a/arch/arm/mach-vexpress/ct-ca9x4.c b/arch/arm/mach-vexpress/ct-ca9x4.c index 4f471fa..60838dd 100644 --- a/arch/arm/mach-vexpress/ct-ca9x4.c +++ b/arch/arm/mach-vexpress/ct-ca9x4.c @@ -9,6 +9,7 @@ #include #include #include +#include #include #include @@ -64,19 +65,6 @@ static void __init ct_ca9x4_init_irq(void) ca9x4_twd_init(); } -static void ct_ca9x4_clcd_enable(struct clcd_fb *fb) -{ - u32 site = v2m_get_master_site(); - - /* - * Old firmware was using the "site" component of the command - * to control the DVI muxer (while it should be always 0 ie. MB). - * Newer firmware uses the data register. Keep both for compatibility. - */ - v2m_cfg_write(SYS_CFG_MUXFPGA | SYS_CFG_SITE(site), site); - v2m_cfg_write(SYS_CFG_DVIMODE | SYS_CFG_SITE(SYS_CFG_SITE_MB), 2); -} - static int ct_ca9x4_clcd_setup(struct clcd_fb *fb) { unsigned long framesize = 1024 * 768 * 2; @@ -93,7 +81,6 @@ static struct clcd_board ct_ca9x4_clcd_data = { .caps = CLCD_CAP_5551 | CLCD_CAP_565, .check = clcdfb_check, .decode = clcdfb_decode, - .enable = ct_ca9x4_clcd_enable, .setup = ct_ca9x4_clcd_setup, .mmap = versatile_clcd_mmap_dma, .remove = versatile_clcd_remove_dma, @@ -111,14 +98,6 @@ static struct amba_device *ct_ca9x4_amba_devs[] __initdata = { &gpio_device, }; - -static struct v2m_osc ct_osc1 = { - .osc = 1, - .rate_min = 10000000, - .rate_max = 80000000, - .rate_default = 23750000, -}; - static struct resource pmu_resources[] = { [0] = { .start = IRQ_CT_CA9X4_PMU_CPU0, @@ -149,10 +128,18 @@ static struct platform_device pmu_device = { .resource = pmu_resources, }; +static struct platform_device osc1_device = { + .name = "vexpress-osc", + .id = 1, + .num_resources = 1, + .resource = (struct resource []) { + VEXPRESS_RES_FUNC(0xf, 1), + }, +}; + static void __init ct_ca9x4_init(void) { int i; - struct clk *clk; #ifdef CONFIG_CACHE_L2X0 void __iomem *l2x0_base = ioremap(CT_CA9X4_L2CC, SZ_4K); @@ -164,14 +151,14 @@ static void __init ct_ca9x4_init(void) l2x0_init(l2x0_base, 0x00400000, 0xfe0fffff); #endif - ct_osc1.site = v2m_get_master_site(); - clk = v2m_osc_register("ct:osc1", &ct_osc1); - clk_register_clkdev(clk, NULL, "ct:clcd"); - for (i = 0; i < ARRAY_SIZE(ct_ca9x4_amba_devs); i++) amba_device_register(ct_ca9x4_amba_devs[i], &iomem_resource); platform_device_register(&pmu_device); + platform_device_register(&osc1_device); + + WARN_ON(clk_register_clkdev(vexpress_osc_setup(&osc1_device.dev), + NULL, "ct:clcd")); } #ifdef CONFIG_SMP diff --git a/arch/arm/mach-vexpress/include/mach/motherboard.h b/arch/arm/mach-vexpress/include/mach/motherboard.h index 1e388c7..68abc8b 100644 --- a/arch/arm/mach-vexpress/include/mach/motherboard.h +++ b/arch/arm/mach-vexpress/include/mach/motherboard.h @@ -1,8 +1,6 @@ #ifndef __MACH_MOTHERBOARD_H #define __MACH_MOTHERBOARD_H -#include - /* * Physical addresses, offset from V2M_PA_CS0-3 */ @@ -41,31 +39,6 @@ #define V2M_CF (V2M_PA_CS7 + 0x0001a000) #define V2M_CLCD (V2M_PA_CS7 + 0x0001f000) -/* - * Offsets from SYSREGS base - */ -#define V2M_SYS_ID 0x000 -#define V2M_SYS_SW 0x004 -#define V2M_SYS_LED 0x008 -#define V2M_SYS_100HZ 0x024 -#define V2M_SYS_FLAGS 0x030 -#define V2M_SYS_FLAGSSET 0x030 -#define V2M_SYS_FLAGSCLR 0x034 -#define V2M_SYS_NVFLAGS 0x038 -#define V2M_SYS_NVFLAGSSET 0x038 -#define V2M_SYS_NVFLAGSCLR 0x03c -#define V2M_SYS_MCI 0x048 -#define V2M_SYS_FLASH 0x03c -#define V2M_SYS_CFGSW 0x058 -#define V2M_SYS_24MHZ 0x05c -#define V2M_SYS_MISC 0x060 -#define V2M_SYS_DMA 0x064 -#define V2M_SYS_PROCID0 0x084 -#define V2M_SYS_PROCID1 0x088 -#define V2M_SYS_CFGDATA 0x0a0 -#define V2M_SYS_CFGCTRL 0x0a4 -#define V2M_SYS_CFGSTAT 0x0a8 - /* * Interrupts. Those in {} are for AMBA devices @@ -91,43 +64,6 @@ /* - * Configuration - */ -#define SYS_CFG_START (1 << 31) -#define SYS_CFG_WRITE (1 << 30) -#define SYS_CFG_OSC (1 << 20) -#define SYS_CFG_VOLT (2 << 20) -#define SYS_CFG_AMP (3 << 20) -#define SYS_CFG_TEMP (4 << 20) -#define SYS_CFG_RESET (5 << 20) -#define SYS_CFG_SCC (6 << 20) -#define SYS_CFG_MUXFPGA (7 << 20) -#define SYS_CFG_SHUTDOWN (8 << 20) -#define SYS_CFG_REBOOT (9 << 20) -#define SYS_CFG_DVIMODE (11 << 20) -#define SYS_CFG_POWER (12 << 20) -#define SYS_CFG_SITE(n) ((n) << 16) -#define SYS_CFG_SITE_MB 0 -#define SYS_CFG_SITE_DB1 1 -#define SYS_CFG_SITE_DB2 2 -#define SYS_CFG_STACK(n) ((n) << 12) - -#define SYS_CFG_ERR (1 << 1) -#define SYS_CFG_COMPLETE (1 << 0) - -int v2m_cfg_write(u32 devfn, u32 data); -int v2m_cfg_read(u32 devfn, u32 *data); -void v2m_flags_set(u32 data); - -/* - * Miscellaneous - */ -#define SYS_MISC_MASTERSITE (1 << 14) -#define SYS_PROCIDx_HBI_MASK 0xfff - -int v2m_get_master_site(void); - -/* * Core tile IDs */ #define V2M_CT_ID_CA9 0x0c000191 @@ -149,21 +85,4 @@ struct ct_desc { extern struct ct_desc *ct_desc; -/* - * OSC clock provider - */ -struct v2m_osc { - struct clk_hw hw; - u8 site; /* 0 = motherboard, 1 = site 1, 2 = site 2 */ - u8 stack; /* board stack position */ - u16 osc; - unsigned long rate_min; - unsigned long rate_max; - unsigned long rate_default; -}; - -#define to_v2m_osc(osc) container_of(osc, struct v2m_osc, hw) - -struct clk *v2m_osc_register(const char *name, struct v2m_osc *osc); - #endif diff --git a/arch/arm/mach-vexpress/platsmp.c b/arch/arm/mach-vexpress/platsmp.c index 7db27c8..c5d70de 100644 --- a/arch/arm/mach-vexpress/platsmp.c +++ b/arch/arm/mach-vexpress/platsmp.c @@ -13,6 +13,7 @@ #include #include #include +#include #include #include @@ -193,7 +194,7 @@ static void __init vexpress_smp_prepare_cpus(unsigned int max_cpus) * until it receives a soft interrupt, and then the * secondary CPU branches to this address. */ - v2m_flags_set(virt_to_phys(versatile_secondary_startup)); + vexpress_flags_set(virt_to_phys(versatile_secondary_startup)); } struct smp_operations __initdata vexpress_smp_ops = { diff --git a/arch/arm/mach-vexpress/v2m.c b/arch/arm/mach-vexpress/v2m.c index 560e0df..99d4172 100644 --- a/arch/arm/mach-vexpress/v2m.c +++ b/arch/arm/mach-vexpress/v2m.c @@ -16,11 +16,10 @@ #include #include #include -#include -#include #include #include #include +#include #include #include @@ -33,7 +32,6 @@ #include #include #include -#include #include #include @@ -58,22 +56,6 @@ static struct map_desc v2m_io_desc[] __initdata = { }, }; -static void __iomem *v2m_sysreg_base; - -static void __init v2m_sysctl_init(void __iomem *base) -{ - u32 scctrl; - - if (WARN_ON(!base)) - return; - - /* Select 1MHz TIMCLK as the reference clock for SP804 timers */ - scctrl = readl(base + SCCTRL); - scctrl |= SCCTRL_TIMEREN0SEL_TIMCLK; - scctrl |= SCCTRL_TIMEREN1SEL_TIMCLK; - writel(scctrl, base + SCCTRL); -} - static void __init v2m_sp804_init(void __iomem *base, unsigned int irq) { if (WARN_ON(!base || irq == NO_IRQ)) @@ -87,69 +69,6 @@ static void __init v2m_sp804_init(void __iomem *base, unsigned int irq) } -static DEFINE_SPINLOCK(v2m_cfg_lock); - -int v2m_cfg_write(u32 devfn, u32 data) -{ - /* Configuration interface broken? */ - u32 val; - - printk("%s: writing %08x to %08x\n", __func__, data, devfn); - - devfn |= SYS_CFG_START | SYS_CFG_WRITE; - - spin_lock(&v2m_cfg_lock); - val = readl(v2m_sysreg_base + V2M_SYS_CFGSTAT); - writel(val & ~SYS_CFG_COMPLETE, v2m_sysreg_base + V2M_SYS_CFGSTAT); - - writel(data, v2m_sysreg_base + V2M_SYS_CFGDATA); - writel(devfn, v2m_sysreg_base + V2M_SYS_CFGCTRL); - - do { - val = readl(v2m_sysreg_base + V2M_SYS_CFGSTAT); - } while (val == 0); - spin_unlock(&v2m_cfg_lock); - - return !!(val & SYS_CFG_ERR); -} - -int v2m_cfg_read(u32 devfn, u32 *data) -{ - u32 val; - - devfn |= SYS_CFG_START; - - spin_lock(&v2m_cfg_lock); - writel(0, v2m_sysreg_base + V2M_SYS_CFGSTAT); - writel(devfn, v2m_sysreg_base + V2M_SYS_CFGCTRL); - - mb(); - - do { - cpu_relax(); - val = readl(v2m_sysreg_base + V2M_SYS_CFGSTAT); - } while (val == 0); - - *data = readl(v2m_sysreg_base + V2M_SYS_CFGDATA); - spin_unlock(&v2m_cfg_lock); - - return !!(val & SYS_CFG_ERR); -} - -void __init v2m_flags_set(u32 data) -{ - writel(~0, v2m_sysreg_base + V2M_SYS_FLAGSCLR); - writel(data, v2m_sysreg_base + V2M_SYS_FLAGSSET); -} - -int v2m_get_master_site(void) -{ - u32 misc = readl(v2m_sysreg_base + V2M_SYS_MISC); - - return misc & SYS_MISC_MASTERSITE ? SYS_CFG_SITE_DB2 : SYS_CFG_SITE_DB1; -} - - static struct resource v2m_pcie_i2c_resource = { .start = V2M_SERIAL_BUS_PCI, .end = V2M_SERIAL_BUS_PCI + SZ_4K - 1, @@ -237,14 +156,8 @@ static struct platform_device v2m_usb_device = { .dev.platform_data = &v2m_usb_config, }; -static void v2m_flash_set_vpp(struct platform_device *pdev, int on) -{ - writel(on != 0, v2m_sysreg_base + V2M_SYS_FLASH); -} - static struct physmap_flash_data v2m_flash_data = { .width = 4, - .set_vpp = v2m_flash_set_vpp, }; static struct resource v2m_flash_resources[] = { @@ -291,14 +204,61 @@ static struct platform_device v2m_cf_device = { .dev.platform_data = &v2m_pata_data, }; -static unsigned int v2m_mmci_status(struct device *dev) -{ - return readl(v2m_sysreg_base + V2M_SYS_MCI) & (1 << 0); -} - static struct mmci_platform_data v2m_mmci_data = { .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34, - .status = v2m_mmci_status, + .gpio_wp = VEXPRESS_GPIO_MMC_WPROT, + .gpio_cd = VEXPRESS_GPIO_MMC_CARDIN, +}; + +static struct resource v2m_sysreg_resources[] = { + { + .start = V2M_SYSREGS, + .end = V2M_SYSREGS + 0xfff, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device v2m_sysreg_device = { + .name = "vexpress-sysreg", + .id = -1, + .resource = v2m_sysreg_resources, + .num_resources = ARRAY_SIZE(v2m_sysreg_resources), +}; + +static struct platform_device v2m_muxfpga_device = { + .name = "vexpress-muxfpga", + .id = 0, + .num_resources = 1, + .resource = (struct resource []) { + VEXPRESS_RES_FUNC(0, 7), + } +}; + +static struct platform_device v2m_shutdown_device = { + .name = "vexpress-shutdown", + .id = 0, + .num_resources = 1, + .resource = (struct resource []) { + VEXPRESS_RES_FUNC(0, 8), + } +}; + +static struct platform_device v2m_reboot_device = { + .name = "vexpress-reboot", + .id = 0, + .num_resources = 1, + .resource = (struct resource []) { + VEXPRESS_RES_FUNC(0, 9), + } +}; + +static struct platform_device v2m_dvimode_device = { + .name = "vexpress-dvimode", + .id = 0, + .num_resources = 1, + .resource = (struct resource []) { + VEXPRESS_RES_FUNC(0, 11), + } }; static AMBA_APB_DEVICE(aaci, "mb:aaci", 0, V2M_AACI, IRQ_V2M_AACI, NULL); @@ -325,123 +285,9 @@ static struct amba_device *v2m_amba_devs[] __initdata = { &rtc_device, }; - -static unsigned long v2m_osc_recalc_rate(struct clk_hw *hw, - unsigned long parent_rate) -{ - struct v2m_osc *osc = to_v2m_osc(hw); - - return !parent_rate ? osc->rate_default : parent_rate; -} - -static long v2m_osc_round_rate(struct clk_hw *hw, unsigned long rate, - unsigned long *parent_rate) -{ - struct v2m_osc *osc = to_v2m_osc(hw); - - if (WARN_ON(rate < osc->rate_min)) - rate = osc->rate_min; - - if (WARN_ON(rate > osc->rate_max)) - rate = osc->rate_max; - - return rate; -} - -static int v2m_osc_set_rate(struct clk_hw *hw, unsigned long rate, - unsigned long parent_rate) -{ - struct v2m_osc *osc = to_v2m_osc(hw); - - v2m_cfg_write(SYS_CFG_OSC | SYS_CFG_SITE(osc->site) | - SYS_CFG_STACK(osc->stack) | osc->osc, rate); - - return 0; -} - -static struct clk_ops v2m_osc_ops = { - .recalc_rate = v2m_osc_recalc_rate, - .round_rate = v2m_osc_round_rate, - .set_rate = v2m_osc_set_rate, -}; - -struct clk * __init v2m_osc_register(const char *name, struct v2m_osc *osc) -{ - struct clk_init_data init; - - WARN_ON(osc->site > 2); - WARN_ON(osc->stack > 15); - WARN_ON(osc->osc > 4095); - - init.name = name; - init.ops = &v2m_osc_ops; - init.flags = CLK_IS_ROOT; - init.num_parents = 0; - - osc->hw.init = &init; - - return clk_register(NULL, &osc->hw); -} - -static struct v2m_osc v2m_mb_osc1 = { - .site = SYS_CFG_SITE_MB, - .osc = 1, - .rate_min = 23750000, - .rate_max = 63500000, - .rate_default = 23750000, -}; - -static const char *v2m_ref_clk_periphs[] __initconst = { - "mb:wdt", "1000f000.wdt", "1c0f0000.wdt", /* SP805 WDT */ -}; - -static const char *v2m_osc1_periphs[] __initconst = { - "mb:clcd", "1001f000.clcd", "1c1f0000.clcd", /* PL111 CLCD */ -}; - -static const char *v2m_osc2_periphs[] __initconst = { - "mb:mmci", "10005000.mmci", "1c050000.mmci", /* PL180 MMCI */ - "mb:kmi0", "10006000.kmi", "1c060000.kmi", /* PL050 KMI0 */ - "mb:kmi1", "10007000.kmi", "1c070000.kmi", /* PL050 KMI1 */ - "mb:uart0", "10009000.uart", "1c090000.uart", /* PL011 UART0 */ - "mb:uart1", "1000a000.uart", "1c0a0000.uart", /* PL011 UART1 */ - "mb:uart2", "1000b000.uart", "1c0b0000.uart", /* PL011 UART2 */ - "mb:uart3", "1000c000.uart", "1c0c0000.uart", /* PL011 UART3 */ -}; - -static void __init v2m_clk_init(void) -{ - struct clk *clk; - int i; - - clk = clk_register_fixed_rate(NULL, "dummy_apb_pclk", NULL, - CLK_IS_ROOT, 0); - WARN_ON(clk_register_clkdev(clk, "apb_pclk", NULL)); - - clk = clk_register_fixed_rate(NULL, "mb:ref_clk", NULL, - CLK_IS_ROOT, 32768); - for (i = 0; i < ARRAY_SIZE(v2m_ref_clk_periphs); i++) - WARN_ON(clk_register_clkdev(clk, NULL, v2m_ref_clk_periphs[i])); - - clk = clk_register_fixed_rate(NULL, "mb:sp804_clk", NULL, - CLK_IS_ROOT, 1000000); - WARN_ON(clk_register_clkdev(clk, "v2m-timer0", "sp804")); - WARN_ON(clk_register_clkdev(clk, "v2m-timer1", "sp804")); - - clk = v2m_osc_register("mb:osc1", &v2m_mb_osc1); - for (i = 0; i < ARRAY_SIZE(v2m_osc1_periphs); i++) - WARN_ON(clk_register_clkdev(clk, NULL, v2m_osc1_periphs[i])); - - clk = clk_register_fixed_rate(NULL, "mb:osc2", NULL, - CLK_IS_ROOT, 24000000); - for (i = 0; i < ARRAY_SIZE(v2m_osc2_periphs); i++) - WARN_ON(clk_register_clkdev(clk, NULL, v2m_osc2_periphs[i])); -} - static void __init v2m_timer_init(void) { - v2m_sysctl_init(ioremap(V2M_SYSCTL, SZ_4K)); - v2m_clk_init(); + vexpress_clk_init(ioremap(V2M_SYSCTL, SZ_4K)); v2m_sp804_init(ioremap(V2M_TIMER01, SZ_4K), IRQ_V2M_TIMER0); } @@ -453,19 +299,7 @@ static void __init v2m_init_early(void) { if (ct_desc->init_early) ct_desc->init_early(); - versatile_sched_clock_init(v2m_sysreg_base + V2M_SYS_24MHZ, 24000000); -} - -static void v2m_power_off(void) -{ - if (v2m_cfg_write(SYS_CFG_SHUTDOWN | SYS_CFG_SITE(SYS_CFG_SITE_MB), 0)) - printk(KERN_EMERG "Unable to shutdown\n"); -} - -static void v2m_restart(char str, const char *cmd) -{ - if (v2m_cfg_write(SYS_CFG_REBOOT | SYS_CFG_SITE(SYS_CFG_SITE_MB), 0)) - printk(KERN_EMERG "Unable to reboot\n"); + versatile_sched_clock_init(vexpress_get_24mhz_clock_base(), 24000000); } struct ct_desc *ct_desc; @@ -482,7 +316,7 @@ static void __init v2m_populate_ct_desc(void) u32 current_tile_id; ct_desc = NULL; - current_tile_id = readl(v2m_sysreg_base + V2M_SYS_PROCID0) + current_tile_id = vexpress_get_procid(VEXPRESS_SITE_MASTER) & V2M_CT_ID_MASK; for (i = 0; i < ARRAY_SIZE(ct_descs) && !ct_desc; ++i) @@ -498,7 +332,7 @@ static void __init v2m_populate_ct_desc(void) static void __init v2m_map_io(void) { iotable_init(v2m_io_desc, ARRAY_SIZE(v2m_io_desc)); - v2m_sysreg_base = ioremap(V2M_SYSREGS, SZ_4K); + vexpress_sysreg_early_init(ioremap(V2M_SYSREGS, SZ_4K)); v2m_populate_ct_desc(); ct_desc->map_io(); } @@ -515,6 +349,12 @@ static void __init v2m_init(void) regulator_register_fixed(0, v2m_eth_supplies, ARRAY_SIZE(v2m_eth_supplies)); + platform_device_register(&v2m_muxfpga_device); + platform_device_register(&v2m_shutdown_device); + platform_device_register(&v2m_reboot_device); + platform_device_register(&v2m_dvimode_device); + + platform_device_register(&v2m_sysreg_device); platform_device_register(&v2m_pcie_i2c_device); platform_device_register(&v2m_ddc_i2c_device); platform_device_register(&v2m_flash_device); @@ -525,7 +365,7 @@ static void __init v2m_init(void) for (i = 0; i < ARRAY_SIZE(v2m_amba_devs); i++) amba_device_register(v2m_amba_devs[i], &iomem_resource); - pm_power_off = v2m_power_off; + pm_power_off = vexpress_power_off; ct_desc->init_tile(); } @@ -539,7 +379,7 @@ MACHINE_START(VEXPRESS, "ARM-Versatile Express") .timer = &v2m_timer, .handle_irq = gic_handle_irq, .init_machine = v2m_init, - .restart = v2m_restart, + .restart = vexpress_restart, MACHINE_END static struct map_desc v2m_rs1_io_desc __initdata = { @@ -580,20 +420,13 @@ void __init v2m_dt_map_io(void) void __init v2m_dt_init_early(void) { - struct device_node *node; u32 dt_hbi; - node = of_find_compatible_node(NULL, NULL, "arm,vexpress-sysreg"); - v2m_sysreg_base = of_iomap(node, 0); - if (WARN_ON(!v2m_sysreg_base)) - return; + vexpress_sysreg_of_early_init(); /* Confirm board type against DT property, if available */ if (of_property_read_u32(allnodes, "arm,hbi", &dt_hbi) == 0) { - int site = v2m_get_master_site(); - u32 id = readl(v2m_sysreg_base + (site == SYS_CFG_SITE_DB2 ? - V2M_SYS_PROCID1 : V2M_SYS_PROCID0)); - u32 hbi = id & SYS_PROCIDx_HBI_MASK; + u32 hbi = vexpress_get_hbi(VEXPRESS_SITE_MASTER); if (WARN_ON(dt_hbi != hbi)) pr_warning("vexpress: DT HBI (%x) is not matching " @@ -617,10 +450,7 @@ static void __init v2m_dt_timer_init(void) const char *path; int err; - node = of_find_compatible_node(NULL, NULL, "arm,sp810"); - v2m_sysctl_init(of_iomap(node, 0)); - - v2m_clk_init(); + vexpress_clk_of_init(); err = of_property_read_string(of_aliases, "arm,v2m_timer", &path); if (WARN_ON(err)) @@ -631,33 +461,29 @@ static void __init v2m_dt_timer_init(void) twd_local_timer_of_register(); if (arch_timer_sched_clock_init() != 0) - versatile_sched_clock_init(v2m_sysreg_base + V2M_SYS_24MHZ, 24000000); + versatile_sched_clock_init(vexpress_get_24mhz_clock_base(), + 24000000); } static struct sys_timer v2m_dt_timer = { .init = v2m_dt_timer_init, }; -static struct of_dev_auxdata v2m_dt_auxdata_lookup[] __initdata = { - OF_DEV_AUXDATA("arm,vexpress-flash", V2M_NOR0, "physmap-flash", - &v2m_flash_data), - OF_DEV_AUXDATA("arm,primecell", V2M_MMCI, "mb:mmci", &v2m_mmci_data), - /* RS1 memory map */ - OF_DEV_AUXDATA("arm,vexpress-flash", 0x08000000, "physmap-flash", - &v2m_flash_data), - OF_DEV_AUXDATA("arm,primecell", 0x1c050000, "mb:mmci", &v2m_mmci_data), +static const struct of_device_id v2m_dt_bus_match[] __initconst = { + { .compatible = "simple-bus", }, + { .compatible = "arm,amba-bus", }, + { .compatible = "arm,vexpress,config-bus", }, {} }; static void __init v2m_dt_init(void) { l2x0_of_init(0x00400000, 0xfe0fffff); - of_platform_populate(NULL, of_default_bus_match_table, - v2m_dt_auxdata_lookup, NULL); - pm_power_off = v2m_power_off; + of_platform_populate(NULL, v2m_dt_bus_match, NULL, NULL); + pm_power_off = vexpress_power_off; } -const static char *v2m_dt_match[] __initconst = { +static const char * const v2m_dt_match[] __initconst = { "arm,vexpress", "xen,xenvm", NULL, @@ -672,5 +498,5 @@ DT_MACHINE_START(VEXPRESS_DT, "ARM-Versatile Express") .timer = &v2m_dt_timer, .init_machine = v2m_dt_init, .handle_irq = gic_handle_irq, - .restart = v2m_restart, + .restart = vexpress_restart, MACHINE_END diff --git a/include/linux/vexpress.h b/include/linux/vexpress.h index 09c81d7..c52215f 100644 --- a/include/linux/vexpress.h +++ b/include/linux/vexpress.h @@ -107,4 +107,15 @@ unsigned __vexpress_get_site(struct device *dev, struct device_node *node); void vexpress_sysreg_early_init(void __iomem *base); void vexpress_sysreg_of_early_init(void); +void vexpress_power_off(void); +void vexpress_restart(char str, const char *cmd); + +/* Clocks */ + +struct clk *vexpress_osc_setup(struct device *dev); +void vexpress_osc_of_setup(struct device_node *node); + +void vexpress_clk_init(void __iomem *sp810_base); +void vexpress_clk_of_init(void); + #endif -- cgit v0.10.2 From 433683a66401adb0150792e725cc4f631c94de46 Mon Sep 17 00:00:00 2001 From: Pawel Moll Date: Tue, 16 Oct 2012 15:27:12 +0100 Subject: ARM: vexpress: Remove motherboard dependencies in the DTS files The way the VE motherboard Device Trees were constructed enforced naming and structure of daughterboard files. This patch makes it possible to simply include the motherboard description anywhere in the main Device Tree and retires the "arm,v2m-timer" alias - any of the motherboard SP804 timers will be used instead. Signed-off-by: Pawel Moll diff --git a/Documentation/devicetree/bindings/arm/vexpress.txt b/Documentation/devicetree/bindings/arm/vexpress.txt index 5d9996b..ae49161 100644 --- a/Documentation/devicetree/bindings/arm/vexpress.txt +++ b/Documentation/devicetree/bindings/arm/vexpress.txt @@ -141,14 +141,19 @@ can be used to obtain required phandle in the tile's "aliases" node: - SP804 timers: v2m_timer01 and v2m_timer23 -Current Linux implementation requires a "arm,v2m_timer" alias -pointing at one of the motherboard's SP804 timers, if it is to be -used as the system timer. This alias should be defined in the -motherboard files. - -The tile description must define "ranges", "interrupt-map-mask" and -"interrupt-map" properties to translate the motherboard's address -and interrupt space into one used by the tile's processor. +The tile description should define a "smb" node, describing the +Static Memory Bus between the tile and motherboard. It must define +the following properties: +- "simple-bus" compatible value (to ensure creation of the children) + compatible = "simple-bus"; +- mapping of the SMB CS/offset addresses into main address space: + #address-cells = <2>; + #size-cells = <1>; + ranges = <...>; +- interrupts mapping: + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 63>; + interrupt-map = <...>; Example of a VE tile description (simplified) @@ -200,13 +205,20 @@ Example of a VE tile description (simplified) }; }; - motherboard { + smb { + compatible = "simple-bus"; + + #address-cells = <2>; + #size-cells = <1>; /* CS0 is visible at 0x08000000 */ ranges = <0 0 0x08000000 0x04000000>; + + #interrupt-cells = <1>; interrupt-map-mask = <0 0 63>; /* Active high IRQ 0 is connected to GIC's SPI0 */ interrupt-map = <0 0 0 &gic 0 0 4>; + + /include/ "vexpress-v2m-rs1.dtsi" }; }; -/include/ "vexpress-v2m-rs1.dtsi" diff --git a/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi b/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi index 9a7b692..ac870fb 100644 --- a/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi +++ b/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi @@ -17,18 +17,16 @@ * CHANGES TO vexpress-v2m.dtsi! */ -/ { - aliases { - arm,v2m_timer = &v2m_timer01; - }; - motherboard { - compatible = "simple-bus"; + model = "V2M-P1"; + arm,hbi = <0x190>; arm,vexpress,site = <0>; arm,v2m-memory-map = "rs1"; + compatible = "arm,vexpress,v2m-p1", "simple-bus"; #address-cells = <2>; /* SMB chipselect number and offset */ #size-cells = <1>; #interrupt-cells = <1>; + ranges; flash@0,00000000 { compatible = "arm,vexpress-flash", "cfi-flash"; @@ -340,4 +338,3 @@ }; }; }; -}; diff --git a/arch/arm/boot/dts/vexpress-v2m.dtsi b/arch/arm/boot/dts/vexpress-v2m.dtsi index 4d321a8..f142036 100644 --- a/arch/arm/boot/dts/vexpress-v2m.dtsi +++ b/arch/arm/boot/dts/vexpress-v2m.dtsi @@ -17,17 +17,15 @@ * CHANGES TO vexpress-v2m-rs1.dtsi! */ -/ { - aliases { - arm,v2m_timer = &v2m_timer01; - }; - motherboard { - compatible = "simple-bus"; + model = "V2M-P1"; + arm,hbi = <0x190>; arm,vexpress,site = <0>; + compatible = "arm,vexpress,v2m-p1", "simple-bus"; #address-cells = <2>; /* SMB chipselect number and offset */ #size-cells = <1>; #interrupt-cells = <1>; + ranges; flash@0,00000000 { compatible = "arm,vexpress-flash", "cfi-flash"; @@ -339,4 +337,3 @@ }; }; }; -}; diff --git a/arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts b/arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts index 4bbed10..a3d37ec 100644 --- a/arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts +++ b/arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts @@ -220,7 +220,11 @@ }; }; - motherboard { + smb { + compatible = "simple-bus"; + + #address-cells = <2>; + #size-cells = <1>; ranges = <0 0 0 0x08000000 0x04000000>, <1 0 0 0x14000000 0x04000000>, <2 0 0 0x18000000 0x04000000>, @@ -228,6 +232,7 @@ <4 0 0 0x0c000000 0x04000000>, <5 0 0 0x10000000 0x04000000>; + #interrupt-cells = <1>; interrupt-map-mask = <0 0 63>; interrupt-map = <0 0 0 &gic 0 0 4>, <0 0 1 &gic 0 1 4>, @@ -272,7 +277,7 @@ <0 0 40 &gic 0 40 4>, <0 0 41 &gic 0 41 4>, <0 0 42 &gic 0 42 4>; + + /include/ "vexpress-v2m-rs1.dtsi" }; }; - -/include/ "vexpress-v2m-rs1.dtsi" diff --git a/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts b/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts index 3f4e1d0..1fc405a 100644 --- a/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts +++ b/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts @@ -305,7 +305,11 @@ }; }; - motherboard { + smb { + compatible = "simple-bus"; + + #address-cells = <2>; + #size-cells = <1>; ranges = <0 0 0 0x08000000 0x04000000>, <1 0 0 0x14000000 0x04000000>, <2 0 0 0x18000000 0x04000000>, @@ -313,6 +317,7 @@ <4 0 0 0x0c000000 0x04000000>, <5 0 0 0x10000000 0x04000000>; + #interrupt-cells = <1>; interrupt-map-mask = <0 0 63>; interrupt-map = <0 0 0 &gic 0 0 4>, <0 0 1 &gic 0 1 4>, @@ -357,7 +362,7 @@ <0 0 40 &gic 0 40 4>, <0 0 41 &gic 0 41 4>, <0 0 42 &gic 0 42 4>; + + /include/ "vexpress-v2m-rs1.dtsi" }; }; - -/include/ "vexpress-v2m-rs1.dtsi" diff --git a/arch/arm/boot/dts/vexpress-v2p-ca5s.dts b/arch/arm/boot/dts/vexpress-v2p-ca5s.dts index f3c1f2a..6328cbc 100644 --- a/arch/arm/boot/dts/vexpress-v2p-ca5s.dts +++ b/arch/arm/boot/dts/vexpress-v2p-ca5s.dts @@ -182,7 +182,11 @@ }; }; - motherboard { + smb { + compatible = "simple-bus"; + + #address-cells = <2>; + #size-cells = <1>; ranges = <0 0 0x08000000 0x04000000>, <1 0 0x14000000 0x04000000>, <2 0 0x18000000 0x04000000>, @@ -190,6 +194,7 @@ <4 0 0x0c000000 0x04000000>, <5 0 0x10000000 0x04000000>; + #interrupt-cells = <1>; interrupt-map-mask = <0 0 63>; interrupt-map = <0 0 0 &gic 0 0 4>, <0 0 1 &gic 0 1 4>, @@ -234,7 +239,7 @@ <0 0 40 &gic 0 40 4>, <0 0 41 &gic 0 41 4>, <0 0 42 &gic 0 42 4>; + + /include/ "vexpress-v2m-rs1.dtsi" }; }; - -/include/ "vexpress-v2m-rs1.dtsi" diff --git a/arch/arm/boot/dts/vexpress-v2p-ca9.dts b/arch/arm/boot/dts/vexpress-v2p-ca9.dts index 005259d..1420bb1 100644 --- a/arch/arm/boot/dts/vexpress-v2p-ca9.dts +++ b/arch/arm/boot/dts/vexpress-v2p-ca9.dts @@ -265,13 +265,18 @@ }; }; - motherboard { + smb { + compatible = "simple-bus"; + + #address-cells = <2>; + #size-cells = <1>; ranges = <0 0 0x40000000 0x04000000>, <1 0 0x44000000 0x04000000>, <2 0 0x48000000 0x04000000>, <3 0 0x4c000000 0x04000000>, <7 0 0x10000000 0x00020000>; + #interrupt-cells = <1>; interrupt-map-mask = <0 0 63>; interrupt-map = <0 0 0 &gic 0 0 4>, <0 0 1 &gic 0 1 4>, @@ -316,7 +321,7 @@ <0 0 40 &gic 0 40 4>, <0 0 41 &gic 0 41 4>, <0 0 42 &gic 0 42 4>; + + /include/ "vexpress-v2m.dtsi" }; }; - -/include/ "vexpress-v2m.dtsi" diff --git a/arch/arm/mach-vexpress/v2m.c b/arch/arm/mach-vexpress/v2m.c index 99d4172..4e168e8 100644 --- a/arch/arm/mach-vexpress/v2m.c +++ b/arch/arm/mach-vexpress/v2m.c @@ -446,17 +446,20 @@ static void __init v2m_dt_init_irq(void) static void __init v2m_dt_timer_init(void) { - struct device_node *node; - const char *path; - int err; + struct device_node *node = NULL; vexpress_clk_of_init(); - err = of_property_read_string(of_aliases, "arm,v2m_timer", &path); - if (WARN_ON(err)) - return; - node = of_find_node_by_path(path); - v2m_sp804_init(of_iomap(node, 0), irq_of_parse_and_map(node, 0)); + do { + node = of_find_compatible_node(node, NULL, "arm,sp804"); + } while (node && vexpress_get_site_by_node(node) != VEXPRESS_SITE_MB); + if (node) { + pr_info("Using SP804 '%s' as a clock & events source\n", + node->full_name); + v2m_sp804_init(of_iomap(node, 0), + irq_of_parse_and_map(node, 0)); + } + if (arch_timer_of_register() != 0) twd_local_timer_of_register(); -- cgit v0.10.2 From e5c5f2adeb370559f4b221d57214db85858b786a Mon Sep 17 00:00:00 2001 From: Rob Herring Date: Mon, 22 Oct 2012 11:42:54 -0600 Subject: ARM: implement debug_ll_io_init() When using DEBUG_LL, the UART's (or other HW's) registers are mapped into early page tables based on the results of assembly macro addruart. Later, when the page tables are replaced, the same virtual address must remain valid. Historically, this has been ensured by using defines from in both the implementation of addruart, and the machine's .map_io() function. However, with the move to single zImage, we wish to remove . To enable this, the macro addruart may be used when constructing the late page tables too; addruart is exposed as a C function debug_ll_addr(), and used to set up the required mapping in debug_ll_io_init(), which may called on an opt-in basis from a machine's .map_io() function. Signed-off-by: Rob Herring [swarren: Mask map.virtual with PAGE_MASK. Checked for NULL results from debug_ll_addr (e.g. when selected UART isn't valid). Fixed compile when either !CONFIG_DEBUG_LL or CONFIG_DEBUG_SEMIHOSTING.] Signed-off-by: Stephen Warren Signed-off-by: Olof Johansson diff --git a/arch/arm/include/asm/mach/map.h b/arch/arm/include/asm/mach/map.h index 195ac2f..2fe141f 100644 --- a/arch/arm/include/asm/mach/map.h +++ b/arch/arm/include/asm/mach/map.h @@ -40,6 +40,13 @@ extern void iotable_init(struct map_desc *, int); extern void vm_reserve_area_early(unsigned long addr, unsigned long size, void *caller); +#ifdef CONFIG_DEBUG_LL +extern void debug_ll_addr(unsigned long *paddr, unsigned long *vaddr); +extern void debug_ll_io_init(void); +#else +static inline void debug_ll_io_init(void) {} +#endif + struct mem_type; extern const struct mem_type *get_mem_type(unsigned int type); /* diff --git a/arch/arm/kernel/debug.S b/arch/arm/kernel/debug.S index 66f711b..6809200 100644 --- a/arch/arm/kernel/debug.S +++ b/arch/arm/kernel/debug.S @@ -100,6 +100,13 @@ ENTRY(printch) b 1b ENDPROC(printch) +ENTRY(debug_ll_addr) + addruart r2, r3, ip + str r2, [r0] + str r3, [r1] + mov pc, lr +ENDPROC(debug_ll_addr) + #else ENTRY(printascii) @@ -119,4 +126,11 @@ ENTRY(printch) mov pc, lr ENDPROC(printch) +ENTRY(debug_ll_addr) + mov r2, #0 + str r2, [r0] + str r2, [r1] + mov pc, lr +ENDPROC(debug_ll_addr) + #endif diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c index 941dfb9..39719bb 100644 --- a/arch/arm/mm/mmu.c +++ b/arch/arm/mm/mmu.c @@ -876,6 +876,22 @@ static void __init pci_reserve_io(void) #define pci_reserve_io() do { } while (0) #endif +#ifdef CONFIG_DEBUG_LL +void __init debug_ll_io_init(void) +{ + struct map_desc map; + + debug_ll_addr(&map.pfn, &map.virtual); + if (!map.pfn || !map.virtual) + return; + map.pfn = __phys_to_pfn(map.pfn); + map.virtual &= PAGE_MASK; + map.length = PAGE_SIZE; + map.type = MT_DEVICE; + create_mapping(&map); +} +#endif + static void * __initdata vmalloc_min = (void *)(VMALLOC_END - (240 << 20) - VMALLOC_OFFSET); -- cgit v0.10.2 From 25804d8123e9c1657694844b10fcd7834493e41a Mon Sep 17 00:00:00 2001 From: Wei Ni Date: Fri, 21 Sep 2012 16:54:56 +0800 Subject: ARM: tegra: set up wlan clocks for tegra dt Set up the wlan clock tree for Tegra20 and Tegra30. Signed-off-by: Wei Ni Signed-off-by: Stephen Warren diff --git a/arch/arm/mach-tegra/board-dt-tegra20.c b/arch/arm/mach-tegra/board-dt-tegra20.c index 71569c0..0419056 100644 --- a/arch/arm/mach-tegra/board-dt-tegra20.c +++ b/arch/arm/mach-tegra/board-dt-tegra20.c @@ -102,8 +102,12 @@ static __initdata struct tegra_clk_init_table tegra_dt_clk_init_table[] = { { "pll_a", "pll_p_out1", 56448000, true }, { "pll_a_out0", "pll_a", 11289600, true }, { "cdev1", NULL, 0, true }, + { "blink", "clk_32k", 32768, true }, { "i2s1", "pll_a_out0", 11289600, false}, { "i2s2", "pll_a_out0", 11289600, false}, + { "sdmmc1", "pll_p", 48000000, false}, + { "sdmmc3", "pll_p", 48000000, false}, + { "sdmmc4", "pll_p", 48000000, false}, { NULL, NULL, 0, 0}, }; diff --git a/arch/arm/mach-tegra/board-dt-tegra30.c b/arch/arm/mach-tegra/board-dt-tegra30.c index e561703..7368ebd 100644 --- a/arch/arm/mach-tegra/board-dt-tegra30.c +++ b/arch/arm/mach-tegra/board-dt-tegra30.c @@ -61,11 +61,15 @@ static __initdata struct tegra_clk_init_table tegra_dt_clk_init_table[] = { { "pll_a_out0", "pll_a", 11289600, true }, { "extern1", "pll_a_out0", 0, true }, { "clk_out_1", "extern1", 0, true }, + { "blink", "clk_32k", 32768, true }, { "i2s0", "pll_a_out0", 11289600, false}, { "i2s1", "pll_a_out0", 11289600, false}, { "i2s2", "pll_a_out0", 11289600, false}, { "i2s3", "pll_a_out0", 11289600, false}, { "i2s4", "pll_a_out0", 11289600, false}, + { "sdmmc1", "pll_p", 48000000, false}, + { "sdmmc3", "pll_p", 48000000, false}, + { "sdmmc4", "pll_p", 48000000, false}, { NULL, NULL, 0, 0}, }; -- cgit v0.10.2 From d534b5d4a530d2d1597c3ffb9e896a3499da6172 Mon Sep 17 00:00:00 2001 From: Joseph Lo Date: Mon, 29 Oct 2012 18:25:29 +0800 Subject: ARM: tegra30: clocks: add AHB and APB clocks Adding the AHB and APB bus clock for Tegra30. Signed-off-by: Joseph Lo Signed-off-by: Stephen Warren diff --git a/arch/arm/mach-tegra/common.c b/arch/arm/mach-tegra/common.c index f688daa..3f55a36 100644 --- a/arch/arm/mach-tegra/common.c +++ b/arch/arm/mach-tegra/common.c @@ -104,6 +104,10 @@ static __initdata struct tegra_clk_init_table tegra30_clk_init_table[] = { { "clk_m", NULL, 0, true }, { "pll_p", "clk_m", 408000000, true }, { "pll_p_out1", "pll_p", 9600000, true }, + { "pll_p_out4", "pll_p", 102000000, true }, + { "sclk", "pll_p_out4", 102000000, true }, + { "hclk", "sclk", 102000000, true }, + { "pclk", "hclk", 51000000, true }, { NULL, NULL, 0, 0}, }; #endif diff --git a/arch/arm/mach-tegra/tegra30_clocks.c b/arch/arm/mach-tegra/tegra30_clocks.c index 000239d..f5b453f 100644 --- a/arch/arm/mach-tegra/tegra30_clocks.c +++ b/arch/arm/mach-tegra/tegra30_clocks.c @@ -791,6 +791,112 @@ struct clk_ops tegra30_twd_ops = { .recalc_rate = tegra30_twd_clk_recalc_rate, }; +/* bus clock functions */ +static int tegra30_bus_clk_is_enabled(struct clk_hw *hw) +{ + struct clk_tegra *c = to_clk_tegra(hw); + u32 val = clk_readl(c->reg); + + c->state = ((val >> c->reg_shift) & BUS_CLK_DISABLE) ? OFF : ON; + return c->state; +} + +static int tegra30_bus_clk_enable(struct clk_hw *hw) +{ + struct clk_tegra *c = to_clk_tegra(hw); + u32 val; + + val = clk_readl(c->reg); + val &= ~(BUS_CLK_DISABLE << c->reg_shift); + clk_writel(val, c->reg); + + return 0; +} + +static void tegra30_bus_clk_disable(struct clk_hw *hw) +{ + struct clk_tegra *c = to_clk_tegra(hw); + u32 val; + + val = clk_readl(c->reg); + val |= BUS_CLK_DISABLE << c->reg_shift; + clk_writel(val, c->reg); +} + +static unsigned long tegra30_bus_clk_recalc_rate(struct clk_hw *hw, + unsigned long prate) +{ + struct clk_tegra *c = to_clk_tegra(hw); + u32 val = clk_readl(c->reg); + u64 rate = prate; + + c->div = ((val >> c->reg_shift) & BUS_CLK_DIV_MASK) + 1; + c->mul = 1; + + if (c->mul != 0 && c->div != 0) { + rate *= c->mul; + rate += c->div - 1; /* round up */ + do_div(rate, c->div); + } + return rate; +} + +static int tegra30_bus_clk_set_rate(struct clk_hw *hw, unsigned long rate, + unsigned long parent_rate) +{ + struct clk_tegra *c = to_clk_tegra(hw); + int ret = -EINVAL; + u32 val; + int i; + + val = clk_readl(c->reg); + for (i = 1; i <= 4; i++) { + if (rate == parent_rate / i) { + val &= ~(BUS_CLK_DIV_MASK << c->reg_shift); + val |= (i - 1) << c->reg_shift; + clk_writel(val, c->reg); + c->div = i; + c->mul = 1; + ret = 0; + break; + } + } + + return ret; +} + +static long tegra30_bus_clk_round_rate(struct clk_hw *hw, unsigned long rate, + unsigned long *prate) +{ + unsigned long parent_rate = *prate; + s64 divider; + + if (rate >= parent_rate) + return parent_rate; + + divider = parent_rate; + divider += rate - 1; + do_div(divider, rate); + + if (divider < 0) + return divider; + + if (divider > 4) + divider = 4; + do_div(parent_rate, divider); + + return parent_rate; +} + +struct clk_ops tegra30_bus_ops = { + .is_enabled = tegra30_bus_clk_is_enabled, + .enable = tegra30_bus_clk_enable, + .disable = tegra30_bus_clk_disable, + .set_rate = tegra30_bus_clk_set_rate, + .round_rate = tegra30_bus_clk_round_rate, + .recalc_rate = tegra30_bus_clk_recalc_rate, +}; + /* Blink output functions */ static int tegra30_blink_clk_is_enabled(struct clk_hw *hw) { diff --git a/arch/arm/mach-tegra/tegra30_clocks.h b/arch/arm/mach-tegra/tegra30_clocks.h index f2f88fe..7a34adb 100644 --- a/arch/arm/mach-tegra/tegra30_clocks.h +++ b/arch/arm/mach-tegra/tegra30_clocks.h @@ -34,6 +34,7 @@ extern struct clk_ops tegra_clk_out_ops; extern struct clk_ops tegra30_super_ops; extern struct clk_ops tegra30_blink_clk_ops; extern struct clk_ops tegra30_twd_ops; +extern struct clk_ops tegra30_bus_ops; extern struct clk_ops tegra30_periph_clk_ops; extern struct clk_ops tegra30_dsib_clk_ops; extern struct clk_ops tegra_nand_clk_ops; diff --git a/arch/arm/mach-tegra/tegra30_clocks_data.c b/arch/arm/mach-tegra/tegra30_clocks_data.c index 3d2e553..7bc8b1d 100644 --- a/arch/arm/mach-tegra/tegra30_clocks_data.c +++ b/arch/arm/mach-tegra/tegra30_clocks_data.c @@ -711,6 +711,50 @@ static struct clk tegra_clk_sclk = { .num_parents = ARRAY_SIZE(mux_sclk), }; +static const char *tegra_hclk_parent_names[] = { + "tegra_sclk", +}; + +static struct clk *tegra_hclk_parents[] = { + &tegra_clk_sclk, +}; + +static struct clk tegra_hclk; +static struct clk_tegra tegra_hclk_hw = { + .hw = { + .clk = &tegra_hclk, + }, + .flags = DIV_BUS, + .reg = 0x30, + .reg_shift = 4, + .max_rate = 378000000, + .min_rate = 12000000, +}; +DEFINE_CLK_TEGRA(hclk, 0, &tegra30_bus_ops, 0, tegra_hclk_parent_names, + tegra_hclk_parents, &tegra_clk_sclk); + +static const char *tegra_pclk_parent_names[] = { + "tegra_hclk", +}; + +static struct clk *tegra_pclk_parents[] = { + &tegra_hclk, +}; + +static struct clk tegra_pclk; +static struct clk_tegra tegra_pclk_hw = { + .hw = { + .clk = &tegra_pclk, + }, + .flags = DIV_BUS, + .reg = 0x30, + .reg_shift = 0, + .max_rate = 167000000, + .min_rate = 12000000, +}; +DEFINE_CLK_TEGRA(pclk, 0, &tegra30_bus_ops, 0, tegra_pclk_parent_names, + tegra_pclk_parents, &tegra_hclk); + static const char *mux_blink[] = { "clk_32k", }; @@ -1325,6 +1369,8 @@ struct clk *tegra_ptr_clks[] = { &tegra_cml1, &tegra_pciex, &tegra_clk_sclk, + &tegra_hclk, + &tegra_pclk, &tegra_clk_blink, &tegra30_clk_twd, }; -- cgit v0.10.2 From 5ab134ad09988ca8225e759a052df7a1bbd26145 Mon Sep 17 00:00:00 2001 From: Joseph Lo Date: Mon, 29 Oct 2012 18:25:45 +0800 Subject: ARM: tegra: dt: add L2 cache controller Add L2 cache controller binding into DT for Tegra. Signed-off-by: Joseph Lo Signed-off-by: Stephen Warren diff --git a/arch/arm/boot/dts/tegra20.dtsi b/arch/arm/boot/dts/tegra20.dtsi index f3a09d0..f40cfba 100644 --- a/arch/arm/boot/dts/tegra20.dtsi +++ b/arch/arm/boot/dts/tegra20.dtsi @@ -4,6 +4,15 @@ compatible = "nvidia,tegra20"; interrupt-parent = <&intc>; + cache-controller@50043000 { + compatible = "arm,pl310-cache"; + reg = <0x50043000 0x1000>; + arm,data-latency = <5 5 2>; + arm,tag-latency = <4 4 2>; + cache-unified; + cache-level = <2>; + }; + intc: interrupt-controller { compatible = "arm,cortex-a9-gic"; reg = <0x50041000 0x1000 diff --git a/arch/arm/boot/dts/tegra30.dtsi b/arch/arm/boot/dts/tegra30.dtsi index b1497c7..148371b 100644 --- a/arch/arm/boot/dts/tegra30.dtsi +++ b/arch/arm/boot/dts/tegra30.dtsi @@ -4,6 +4,15 @@ compatible = "nvidia,tegra30"; interrupt-parent = <&intc>; + cache-controller@50043000 { + compatible = "arm,pl310-cache"; + reg = <0x50043000 0x1000>; + arm,data-latency = <6 6 2>; + arm,tag-latency = <5 5 2>; + cache-unified; + cache-level = <2>; + }; + intc: interrupt-controller { compatible = "arm,cortex-a9-gic"; reg = <0x50041000 0x1000 -- cgit v0.10.2 From d065ab7189f368bbe9505865d63a0ebc470c409e Mon Sep 17 00:00:00 2001 From: Joseph Lo Date: Mon, 29 Oct 2012 18:25:57 +0800 Subject: ARM: tegra: common: using OF api for L2 cache init Moving L2 cache init to DT support. Signed-off-by: Joseph Lo Signed-off-by: Stephen Warren diff --git a/arch/arm/mach-tegra/common.c b/arch/arm/mach-tegra/common.c index 3f55a36..6c04a18 100644 --- a/arch/arm/mach-tegra/common.c +++ b/arch/arm/mach-tegra/common.c @@ -113,20 +113,17 @@ static __initdata struct tegra_clk_init_table tegra30_clk_init_table[] = { #endif -static void __init tegra_init_cache(u32 tag_latency, u32 data_latency) +static void __init tegra_init_cache(void) { #ifdef CONFIG_CACHE_L2X0 void __iomem *p = IO_ADDRESS(TEGRA_ARM_PERIF_BASE) + 0x3000; u32 aux_ctrl, cache_type; - writel_relaxed(tag_latency, p + L2X0_TAG_LATENCY_CTRL); - writel_relaxed(data_latency, p + L2X0_DATA_LATENCY_CTRL); - cache_type = readl(p + L2X0_CACHE_TYPE); aux_ctrl = (cache_type & 0x700) << (17-8); aux_ctrl |= 0x6C000001; - l2x0_init(p, aux_ctrl, 0x8200c3fe); + l2x0_of_init(aux_ctrl, 0x8200c3fe); #endif } @@ -138,7 +135,7 @@ void __init tegra20_init_early(void) tegra_init_fuse(); tegra2_init_clocks(); tegra_clk_init_from_table(tegra20_clk_init_table); - tegra_init_cache(0x331, 0x441); + tegra_init_cache(); tegra_pmc_init(); tegra_powergate_init(); tegra20_hotplug_init(); @@ -151,7 +148,7 @@ void __init tegra30_init_early(void) tegra_init_fuse(); tegra30_init_clocks(); tegra_clk_init_from_table(tegra30_clk_init_table); - tegra_init_cache(0x441, 0x551); + tegra_init_cache(); tegra_pmc_init(); tegra_powergate_init(); tegra30_hotplug_init(); -- cgit v0.10.2 From ffa05e450c3ce6ece6c5e3bdfc202c86e6d4517f Mon Sep 17 00:00:00 2001 From: Laxman Dewangan Date: Tue, 30 Oct 2012 12:35:24 +0530 Subject: ARM: tegra: Add OF_DEV_AUXDATA for SLINK driver in board dt Add OF_DEV_AUXDATA for slink driver for Tegra20 and Tegra30 board dt files. Set the parent clock of slink controller to PLLP and configure clock to 100MHz. Signed-off-by: Laxman Dewangan Signed-off-by: Stephen Warren diff --git a/arch/arm/mach-tegra/board-dt-tegra20.c b/arch/arm/mach-tegra/board-dt-tegra20.c index 0419056..22f5a9b 100644 --- a/arch/arm/mach-tegra/board-dt-tegra20.c +++ b/arch/arm/mach-tegra/board-dt-tegra20.c @@ -89,6 +89,10 @@ struct of_dev_auxdata tegra20_auxdata_lookup[] __initdata = { &tegra_ehci3_pdata), OF_DEV_AUXDATA("nvidia,tegra20-apbdma", TEGRA_APB_DMA_BASE, "tegra-apbdma", NULL), OF_DEV_AUXDATA("nvidia,tegra20-pwm", TEGRA_PWFM_BASE, "tegra-pwm", NULL), + OF_DEV_AUXDATA("nvidia,tegra20-slink", 0x7000D400, "spi_tegra.0", NULL), + OF_DEV_AUXDATA("nvidia,tegra20-slink", 0x7000D600, "spi_tegra.1", NULL), + OF_DEV_AUXDATA("nvidia,tegra20-slink", 0x7000D800, "spi_tegra.2", NULL), + OF_DEV_AUXDATA("nvidia,tegra20-slink", 0x7000DA00, "spi_tegra.3", NULL), {} }; @@ -108,6 +112,10 @@ static __initdata struct tegra_clk_init_table tegra_dt_clk_init_table[] = { { "sdmmc1", "pll_p", 48000000, false}, { "sdmmc3", "pll_p", 48000000, false}, { "sdmmc4", "pll_p", 48000000, false}, + { "sbc1", "pll_p", 100000000, false }, + { "sbc2", "pll_p", 100000000, false }, + { "sbc3", "pll_p", 100000000, false }, + { "sbc4", "pll_p", 100000000, false }, { NULL, NULL, 0, 0}, }; diff --git a/arch/arm/mach-tegra/board-dt-tegra30.c b/arch/arm/mach-tegra/board-dt-tegra30.c index 7368ebd..cd30338 100644 --- a/arch/arm/mach-tegra/board-dt-tegra30.c +++ b/arch/arm/mach-tegra/board-dt-tegra30.c @@ -51,6 +51,12 @@ struct of_dev_auxdata tegra30_auxdata_lookup[] __initdata = { OF_DEV_AUXDATA("nvidia,tegra30-ahub", 0x70080000, "tegra30-ahub", NULL), OF_DEV_AUXDATA("nvidia,tegra30-apbdma", 0x6000a000, "tegra-apbdma", NULL), OF_DEV_AUXDATA("nvidia,tegra30-pwm", TEGRA_PWFM_BASE, "tegra-pwm", NULL), + OF_DEV_AUXDATA("nvidia,tegra30-slink", 0x7000D400, "spi_tegra.0", NULL), + OF_DEV_AUXDATA("nvidia,tegra30-slink", 0x7000D600, "spi_tegra.1", NULL), + OF_DEV_AUXDATA("nvidia,tegra30-slink", 0x7000D800, "spi_tegra.2", NULL), + OF_DEV_AUXDATA("nvidia,tegra30-slink", 0x7000DA00, "spi_tegra.3", NULL), + OF_DEV_AUXDATA("nvidia,tegra30-slink", 0x7000DC00, "spi_tegra.4", NULL), + OF_DEV_AUXDATA("nvidia,tegra30-slink", 0x7000DE00, "spi_tegra.5", NULL), {} }; @@ -70,6 +76,12 @@ static __initdata struct tegra_clk_init_table tegra_dt_clk_init_table[] = { { "sdmmc1", "pll_p", 48000000, false}, { "sdmmc3", "pll_p", 48000000, false}, { "sdmmc4", "pll_p", 48000000, false}, + { "sbc1", "pll_p", 100000000, false}, + { "sbc2", "pll_p", 100000000, false}, + { "sbc3", "pll_p", 100000000, false}, + { "sbc4", "pll_p", 100000000, false}, + { "sbc5", "pll_p", 100000000, false}, + { "sbc6", "pll_p", 100000000, false}, { NULL, NULL, 0, 0}, }; -- cgit v0.10.2 From ed9c0754cef1d9f81f70b3147189a5a1b4a307a8 Mon Sep 17 00:00:00 2001 From: Nobuhiro Iwamatsu Date: Tue, 6 Nov 2012 12:23:43 +0900 Subject: ARM: shmobile: Remove SH7367 support This is old CPU of shmobile, and the machine by which this CPU is used cannot be obtained. Therefore, remove SH7367 support. Signed-off-by: Nobuhiro Iwamatsu Signed-off-by: Simon Horman diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig index 8ae100c..d20dab4 100644 --- a/arch/arm/mach-shmobile/Kconfig +++ b/arch/arm/mach-shmobile/Kconfig @@ -2,12 +2,6 @@ if ARCH_SHMOBILE comment "SH-Mobile System Type" -config ARCH_SH7367 - bool "SH-Mobile G3 (SH7367)" - select ARCH_WANT_OPTIONAL_GPIOLIB - select CPU_V6 - select SH_CLK_CPG - config ARCH_SH7377 bool "SH-Mobile G4 (SH7377)" select ARCH_WANT_OPTIONAL_GPIOLIB diff --git a/arch/arm/mach-shmobile/Makefile b/arch/arm/mach-shmobile/Makefile index fe2c97c..7c07a04 100644 --- a/arch/arm/mach-shmobile/Makefile +++ b/arch/arm/mach-shmobile/Makefile @@ -6,7 +6,6 @@ obj-y := timer.o console.o clock.o # CPU objects -obj-$(CONFIG_ARCH_SH7367) += setup-sh7367.o clock-sh7367.o intc-sh7367.o obj-$(CONFIG_ARCH_SH7377) += setup-sh7377.o clock-sh7377.o intc-sh7377.o obj-$(CONFIG_ARCH_SH7372) += setup-sh7372.o clock-sh7372.o intc-sh7372.o obj-$(CONFIG_ARCH_SH73A0) += setup-sh73a0.o clock-sh73a0.o intc-sh73a0.o @@ -23,7 +22,6 @@ smp-$(CONFIG_ARCH_EMEV2) += smp-emev2.o # Pinmux setup pfc-y := -pfc-$(CONFIG_ARCH_SH7367) += pfc-sh7367.o pfc-$(CONFIG_ARCH_SH7377) += pfc-sh7377.o pfc-$(CONFIG_ARCH_SH7372) += pfc-sh7372.o pfc-$(CONFIG_ARCH_SH73A0) += pfc-sh73a0.o @@ -31,7 +29,6 @@ pfc-$(CONFIG_ARCH_R8A7740) += pfc-r8a7740.o pfc-$(CONFIG_ARCH_R8A7779) += pfc-r8a7779.o # IRQ objects -obj-$(CONFIG_ARCH_SH7367) += entry-intc.o obj-$(CONFIG_ARCH_SH7377) += entry-intc.o obj-$(CONFIG_ARCH_SH7372) += entry-intc.o obj-$(CONFIG_ARCH_R8A7740) += entry-intc.o diff --git a/arch/arm/mach-shmobile/clock-sh7367.c b/arch/arm/mach-shmobile/clock-sh7367.c deleted file mode 100644 index ef0a95e..0000000 --- a/arch/arm/mach-shmobile/clock-sh7367.c +++ /dev/null @@ -1,355 +0,0 @@ -/* - * SH7367 clock framework support - * - * Copyright (C) 2010 Magnus Damm - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ -#include -#include -#include -#include -#include -#include - -/* SH7367 registers */ -#define RTFRQCR IOMEM(0xe6150000) -#define SYFRQCR IOMEM(0xe6150004) -#define CMFRQCR IOMEM(0xe61500E0) -#define VCLKCR1 IOMEM(0xe6150008) -#define VCLKCR2 IOMEM(0xe615000C) -#define VCLKCR3 IOMEM(0xe615001C) -#define SCLKACR IOMEM(0xe6150010) -#define SCLKBCR IOMEM(0xe6150014) -#define SUBUSBCKCR IOMEM(0xe6158080) -#define SPUCKCR IOMEM(0xe6150084) -#define MSUCKCR IOMEM(0xe6150088) -#define MVI3CKCR IOMEM(0xe6150090) -#define VOUCKCR IOMEM(0xe6150094) -#define MFCK1CR IOMEM(0xe6150098) -#define MFCK2CR IOMEM(0xe615009C) -#define PLLC1CR IOMEM(0xe6150028) -#define PLLC2CR IOMEM(0xe615002C) -#define RTMSTPCR0 IOMEM(0xe6158030) -#define RTMSTPCR2 IOMEM(0xe6158038) -#define SYMSTPCR0 IOMEM(0xe6158040) -#define SYMSTPCR2 IOMEM(0xe6158048) -#define CMMSTPCR0 IOMEM(0xe615804c) - -/* Fixed 32 KHz root clock from EXTALR pin */ -static struct clk r_clk = { - .rate = 32768, -}; - -/* - * 26MHz default rate for the EXTALB1 root input clock. - * If needed, reset this with clk_set_rate() from the platform code. - */ -struct clk sh7367_extalb1_clk = { - .rate = 26666666, -}; - -/* - * 48MHz default rate for the EXTAL2 root input clock. - * If needed, reset this with clk_set_rate() from the platform code. - */ -struct clk sh7367_extal2_clk = { - .rate = 48000000, -}; - -/* A fixed divide-by-2 block */ -static unsigned long div2_recalc(struct clk *clk) -{ - return clk->parent->rate / 2; -} - -static struct sh_clk_ops div2_clk_ops = { - .recalc = div2_recalc, -}; - -/* Divide extalb1 by two */ -static struct clk extalb1_div2_clk = { - .ops = &div2_clk_ops, - .parent = &sh7367_extalb1_clk, -}; - -/* Divide extal2 by two */ -static struct clk extal2_div2_clk = { - .ops = &div2_clk_ops, - .parent = &sh7367_extal2_clk, -}; - -/* PLLC1 */ -static unsigned long pllc1_recalc(struct clk *clk) -{ - unsigned long mult = 1; - - if (__raw_readl(PLLC1CR) & (1 << 14)) - mult = (((__raw_readl(RTFRQCR) >> 24) & 0x3f) + 1) * 2; - - return clk->parent->rate * mult; -} - -static struct sh_clk_ops pllc1_clk_ops = { - .recalc = pllc1_recalc, -}; - -static struct clk pllc1_clk = { - .ops = &pllc1_clk_ops, - .flags = CLK_ENABLE_ON_INIT, - .parent = &extalb1_div2_clk, -}; - -/* Divide PLLC1 by two */ -static struct clk pllc1_div2_clk = { - .ops = &div2_clk_ops, - .parent = &pllc1_clk, -}; - -/* PLLC2 */ -static unsigned long pllc2_recalc(struct clk *clk) -{ - unsigned long mult = 1; - - if (__raw_readl(PLLC2CR) & (1 << 31)) - mult = (((__raw_readl(PLLC2CR) >> 24) & 0x3f) + 1) * 2; - - return clk->parent->rate * mult; -} - -static struct sh_clk_ops pllc2_clk_ops = { - .recalc = pllc2_recalc, -}; - -static struct clk pllc2_clk = { - .ops = &pllc2_clk_ops, - .flags = CLK_ENABLE_ON_INIT, - .parent = &extalb1_div2_clk, -}; - -static struct clk *main_clks[] = { - &r_clk, - &sh7367_extalb1_clk, - &sh7367_extal2_clk, - &extalb1_div2_clk, - &extal2_div2_clk, - &pllc1_clk, - &pllc1_div2_clk, - &pllc2_clk, -}; - -static void div4_kick(struct clk *clk) -{ - unsigned long value; - - /* set KICK bit in SYFRQCR to update hardware setting */ - value = __raw_readl(SYFRQCR); - value |= (1 << 31); - __raw_writel(value, SYFRQCR); -} - -static int divisors[] = { 2, 3, 4, 6, 8, 12, 16, 18, - 24, 32, 36, 48, 0, 72, 0, 0 }; - -static struct clk_div_mult_table div4_div_mult_table = { - .divisors = divisors, - .nr_divisors = ARRAY_SIZE(divisors), -}; - -static struct clk_div4_table div4_table = { - .div_mult_table = &div4_div_mult_table, - .kick = div4_kick, -}; - -enum { DIV4_I, DIV4_G, DIV4_S, DIV4_B, - DIV4_ZX, DIV4_ZT, DIV4_Z, DIV4_ZD, DIV4_HP, - DIV4_ZS, DIV4_ZB, DIV4_ZB3, DIV4_CP, DIV4_NR }; - -#define DIV4(_reg, _bit, _mask, _flags) \ - SH_CLK_DIV4(&pllc1_clk, _reg, _bit, _mask, _flags) - -static struct clk div4_clks[DIV4_NR] = { - [DIV4_I] = DIV4(RTFRQCR, 20, 0x6fff, CLK_ENABLE_ON_INIT), - [DIV4_G] = DIV4(RTFRQCR, 16, 0x6fff, CLK_ENABLE_ON_INIT), - [DIV4_S] = DIV4(RTFRQCR, 12, 0x6fff, CLK_ENABLE_ON_INIT), - [DIV4_B] = DIV4(RTFRQCR, 8, 0x6fff, CLK_ENABLE_ON_INIT), - [DIV4_ZX] = DIV4(SYFRQCR, 20, 0x6fff, 0), - [DIV4_ZT] = DIV4(SYFRQCR, 16, 0x6fff, 0), - [DIV4_Z] = DIV4(SYFRQCR, 12, 0x6fff, 0), - [DIV4_ZD] = DIV4(SYFRQCR, 8, 0x6fff, 0), - [DIV4_HP] = DIV4(SYFRQCR, 4, 0x6fff, 0), - [DIV4_ZS] = DIV4(CMFRQCR, 12, 0x6fff, 0), - [DIV4_ZB] = DIV4(CMFRQCR, 8, 0x6fff, 0), - [DIV4_ZB3] = DIV4(CMFRQCR, 4, 0x6fff, 0), - [DIV4_CP] = DIV4(CMFRQCR, 0, 0x6fff, 0), -}; - -enum { DIV6_SUB, DIV6_SIUA, DIV6_SIUB, DIV6_MSU, DIV6_SPU, - DIV6_MVI3, DIV6_MF1, DIV6_MF2, - DIV6_VCK1, DIV6_VCK2, DIV6_VCK3, DIV6_VOU, - DIV6_NR }; - -static struct clk div6_clks[DIV6_NR] = { - [DIV6_SUB] = SH_CLK_DIV6(&sh7367_extal2_clk, SUBUSBCKCR, 0), - [DIV6_SIUA] = SH_CLK_DIV6(&pllc1_div2_clk, SCLKACR, 0), - [DIV6_SIUB] = SH_CLK_DIV6(&pllc1_div2_clk, SCLKBCR, 0), - [DIV6_MSU] = SH_CLK_DIV6(&pllc1_div2_clk, MSUCKCR, 0), - [DIV6_SPU] = SH_CLK_DIV6(&pllc1_div2_clk, SPUCKCR, 0), - [DIV6_MVI3] = SH_CLK_DIV6(&pllc1_div2_clk, MVI3CKCR, 0), - [DIV6_MF1] = SH_CLK_DIV6(&pllc1_div2_clk, MFCK1CR, 0), - [DIV6_MF2] = SH_CLK_DIV6(&pllc1_div2_clk, MFCK2CR, 0), - [DIV6_VCK1] = SH_CLK_DIV6(&pllc1_div2_clk, VCLKCR1, 0), - [DIV6_VCK2] = SH_CLK_DIV6(&pllc1_div2_clk, VCLKCR2, 0), - [DIV6_VCK3] = SH_CLK_DIV6(&pllc1_div2_clk, VCLKCR3, 0), - [DIV6_VOU] = SH_CLK_DIV6(&pllc1_div2_clk, VOUCKCR, 0), -}; - -enum { RTMSTP001, - RTMSTP231, RTMSTP230, RTMSTP229, RTMSTP228, RTMSTP226, - RTMSTP216, RTMSTP206, RTMSTP205, RTMSTP201, - SYMSTP023, SYMSTP007, SYMSTP006, SYMSTP004, - SYMSTP003, SYMSTP002, SYMSTP001, SYMSTP000, - SYMSTP231, SYMSTP229, SYMSTP225, SYMSTP223, SYMSTP222, - SYMSTP215, SYMSTP214, SYMSTP213, SYMSTP211, - CMMSTP003, - MSTP_NR }; - -#define MSTP(_parent, _reg, _bit, _flags) \ - SH_CLK_MSTP32(_parent, _reg, _bit, _flags) - -static struct clk mstp_clks[MSTP_NR] = { - [RTMSTP001] = MSTP(&div6_clks[DIV6_SUB], RTMSTPCR0, 1, 0), /* IIC2 */ - [RTMSTP231] = MSTP(&div4_clks[DIV4_B], RTMSTPCR2, 31, 0), /* VEU3 */ - [RTMSTP230] = MSTP(&div4_clks[DIV4_B], RTMSTPCR2, 30, 0), /* VEU2 */ - [RTMSTP229] = MSTP(&div4_clks[DIV4_B], RTMSTPCR2, 29, 0), /* VEU1 */ - [RTMSTP228] = MSTP(&div4_clks[DIV4_B], RTMSTPCR2, 28, 0), /* VEU0 */ - [RTMSTP226] = MSTP(&div4_clks[DIV4_B], RTMSTPCR2, 26, 0), /* VEU2H */ - [RTMSTP216] = MSTP(&div6_clks[DIV6_SUB], RTMSTPCR2, 16, 0), /* IIC0 */ - [RTMSTP206] = MSTP(&div4_clks[DIV4_B], RTMSTPCR2, 6, 0), /* JPU */ - [RTMSTP205] = MSTP(&div6_clks[DIV6_VOU], RTMSTPCR2, 5, 0), /* VOU */ - [RTMSTP201] = MSTP(&div4_clks[DIV4_B], RTMSTPCR2, 1, 0), /* VPU */ - [SYMSTP023] = MSTP(&div6_clks[DIV6_SPU], SYMSTPCR0, 23, 0), /* SPU1 */ - [SYMSTP007] = MSTP(&div6_clks[DIV6_SUB], SYMSTPCR0, 7, 0), /* SCIFA5 */ - [SYMSTP006] = MSTP(&div6_clks[DIV6_SUB], SYMSTPCR0, 6, 0), /* SCIFB */ - [SYMSTP004] = MSTP(&div6_clks[DIV6_SUB], SYMSTPCR0, 4, 0), /* SCIFA0 */ - [SYMSTP003] = MSTP(&div6_clks[DIV6_SUB], SYMSTPCR0, 3, 0), /* SCIFA1 */ - [SYMSTP002] = MSTP(&div6_clks[DIV6_SUB], SYMSTPCR0, 2, 0), /* SCIFA2 */ - [SYMSTP001] = MSTP(&div6_clks[DIV6_SUB], SYMSTPCR0, 1, 0), /* SCIFA3 */ - [SYMSTP000] = MSTP(&div6_clks[DIV6_SUB], SYMSTPCR0, 0, 0), /* SCIFA4 */ - [SYMSTP231] = MSTP(&div6_clks[DIV6_SUB], SYMSTPCR2, 31, 0), /* SIU */ - [SYMSTP229] = MSTP(&r_clk, SYMSTPCR2, 29, 0), /* CMT10 */ - [SYMSTP225] = MSTP(&div6_clks[DIV6_SUB], SYMSTPCR2, 25, 0), /* IRDA */ - [SYMSTP223] = MSTP(&div6_clks[DIV6_SUB], SYMSTPCR2, 23, 0), /* IIC1 */ - [SYMSTP222] = MSTP(&div6_clks[DIV6_SUB], SYMSTPCR2, 22, 0), /* USBHS */ - [SYMSTP215] = MSTP(&div4_clks[DIV4_HP], SYMSTPCR2, 15, 0), /* FLCTL */ - [SYMSTP214] = MSTP(&div4_clks[DIV4_HP], SYMSTPCR2, 14, 0), /* SDHI0 */ - [SYMSTP213] = MSTP(&div4_clks[DIV4_HP], SYMSTPCR2, 13, 0), /* SDHI1 */ - [SYMSTP211] = MSTP(&div4_clks[DIV4_HP], SYMSTPCR2, 11, 0), /* SDHI2 */ - [CMMSTP003] = MSTP(&r_clk, CMMSTPCR0, 3, 0), /* KEYSC */ -}; - -static struct clk_lookup lookups[] = { - /* main clocks */ - CLKDEV_CON_ID("r_clk", &r_clk), - CLKDEV_CON_ID("extalb1", &sh7367_extalb1_clk), - CLKDEV_CON_ID("extal2", &sh7367_extal2_clk), - CLKDEV_CON_ID("extalb1_div2_clk", &extalb1_div2_clk), - CLKDEV_CON_ID("extal2_div2_clk", &extal2_div2_clk), - CLKDEV_CON_ID("pllc1_clk", &pllc1_clk), - CLKDEV_CON_ID("pllc1_div2_clk", &pllc1_div2_clk), - CLKDEV_CON_ID("pllc2_clk", &pllc2_clk), - - /* DIV4 clocks */ - CLKDEV_CON_ID("i_clk", &div4_clks[DIV4_I]), - CLKDEV_CON_ID("g_clk", &div4_clks[DIV4_G]), - CLKDEV_CON_ID("b_clk", &div4_clks[DIV4_B]), - CLKDEV_CON_ID("zx_clk", &div4_clks[DIV4_ZX]), - CLKDEV_CON_ID("zt_clk", &div4_clks[DIV4_ZT]), - CLKDEV_CON_ID("z_clk", &div4_clks[DIV4_Z]), - CLKDEV_CON_ID("zd_clk", &div4_clks[DIV4_ZD]), - CLKDEV_CON_ID("hp_clk", &div4_clks[DIV4_HP]), - CLKDEV_CON_ID("zs_clk", &div4_clks[DIV4_ZS]), - CLKDEV_CON_ID("zb_clk", &div4_clks[DIV4_ZB]), - CLKDEV_CON_ID("zb3_clk", &div4_clks[DIV4_ZB3]), - CLKDEV_CON_ID("cp_clk", &div4_clks[DIV4_CP]), - - /* DIV6 clocks */ - CLKDEV_CON_ID("sub_clk", &div6_clks[DIV6_SUB]), - CLKDEV_CON_ID("siua_clk", &div6_clks[DIV6_SIUA]), - CLKDEV_CON_ID("siub_clk", &div6_clks[DIV6_SIUB]), - CLKDEV_CON_ID("msu_clk", &div6_clks[DIV6_MSU]), - CLKDEV_CON_ID("spu_clk", &div6_clks[DIV6_SPU]), - CLKDEV_CON_ID("mvi3_clk", &div6_clks[DIV6_MVI3]), - CLKDEV_CON_ID("mf1_clk", &div6_clks[DIV6_MF1]), - CLKDEV_CON_ID("mf2_clk", &div6_clks[DIV6_MF2]), - CLKDEV_CON_ID("vck1_clk", &div6_clks[DIV6_VCK1]), - CLKDEV_CON_ID("vck2_clk", &div6_clks[DIV6_VCK2]), - CLKDEV_CON_ID("vck3_clk", &div6_clks[DIV6_VCK3]), - CLKDEV_CON_ID("vou_clk", &div6_clks[DIV6_VOU]), - - /* MSTP32 clocks */ - CLKDEV_DEV_ID("i2c-sh_mobile.2", &mstp_clks[RTMSTP001]), /* IIC2 */ - CLKDEV_DEV_ID("uio_pdrv_genirq.4", &mstp_clks[RTMSTP231]), /* VEU3 */ - CLKDEV_DEV_ID("uio_pdrv_genirq.3", &mstp_clks[RTMSTP230]), /* VEU2 */ - CLKDEV_DEV_ID("uio_pdrv_genirq.2", &mstp_clks[RTMSTP229]), /* VEU1 */ - CLKDEV_DEV_ID("uio_pdrv_genirq.1", &mstp_clks[RTMSTP228]), /* VEU0 */ - CLKDEV_DEV_ID("uio_pdrv_genirq.5", &mstp_clks[RTMSTP226]), /* VEU2H */ - CLKDEV_DEV_ID("i2c-sh_mobile.0", &mstp_clks[RTMSTP216]), /* IIC0 */ - CLKDEV_DEV_ID("uio_pdrv_genirq.6", &mstp_clks[RTMSTP206]), /* JPU */ - CLKDEV_DEV_ID("sh-vou", &mstp_clks[RTMSTP205]), /* VOU */ - CLKDEV_DEV_ID("uio_pdrv_genirq.0", &mstp_clks[RTMSTP201]), /* VPU */ - CLKDEV_DEV_ID("uio_pdrv_genirq.7", &mstp_clks[SYMSTP023]), /* SPU1 */ - CLKDEV_DEV_ID("sh-sci.5", &mstp_clks[SYMSTP007]), /* SCIFA5 */ - CLKDEV_DEV_ID("sh-sci.6", &mstp_clks[SYMSTP006]), /* SCIFB */ - CLKDEV_DEV_ID("sh-sci.0", &mstp_clks[SYMSTP004]), /* SCIFA0 */ - CLKDEV_DEV_ID("sh-sci.1", &mstp_clks[SYMSTP003]), /* SCIFA1 */ - CLKDEV_DEV_ID("sh-sci.2", &mstp_clks[SYMSTP002]), /* SCIFA2 */ - CLKDEV_DEV_ID("sh-sci.3", &mstp_clks[SYMSTP001]), /* SCIFA3 */ - CLKDEV_DEV_ID("sh-sci.4", &mstp_clks[SYMSTP000]), /* SCIFA4 */ - CLKDEV_DEV_ID("sh_siu", &mstp_clks[SYMSTP231]), /* SIU */ - CLKDEV_DEV_ID("sh_cmt.10", &mstp_clks[SYMSTP229]), /* CMT10 */ - CLKDEV_DEV_ID("sh_irda", &mstp_clks[SYMSTP225]), /* IRDA */ - CLKDEV_DEV_ID("i2c-sh_mobile.1", &mstp_clks[SYMSTP223]), /* IIC1 */ - CLKDEV_DEV_ID("r8a66597_hcd.0", &mstp_clks[SYMSTP222]), /* USBHS */ - CLKDEV_DEV_ID("r8a66597_udc.0", &mstp_clks[SYMSTP222]), /* USBHS */ - CLKDEV_DEV_ID("sh_flctl", &mstp_clks[SYMSTP215]), /* FLCTL */ - CLKDEV_DEV_ID("sh_mobile_sdhi.0", &mstp_clks[SYMSTP214]), /* SDHI0 */ - CLKDEV_DEV_ID("sh_mobile_sdhi.1", &mstp_clks[SYMSTP213]), /* SDHI1 */ - CLKDEV_DEV_ID("sh_mobile_sdhi.2", &mstp_clks[SYMSTP211]), /* SDHI2 */ - CLKDEV_DEV_ID("sh_keysc.0", &mstp_clks[CMMSTP003]), /* KEYSC */ -}; - -void __init sh7367_clock_init(void) -{ - int k, ret = 0; - - for (k = 0; !ret && (k < ARRAY_SIZE(main_clks)); k++) - ret = clk_register(main_clks[k]); - - if (!ret) - ret = sh_clk_div4_register(div4_clks, DIV4_NR, &div4_table); - - if (!ret) - ret = sh_clk_div6_register(div6_clks, DIV6_NR); - - if (!ret) - ret = sh_clk_mstp_register(mstp_clks, MSTP_NR); - - clkdev_add_table(lookups, ARRAY_SIZE(lookups)); - - if (!ret) - shmobile_clk_init(); - else - panic("failed to setup sh7367 clocks\n"); -} diff --git a/arch/arm/mach-shmobile/include/mach/common.h b/arch/arm/mach-shmobile/include/mach/common.h index d47e215..f96fc29 100644 --- a/arch/arm/mach-shmobile/include/mach/common.h +++ b/arch/arm/mach-shmobile/include/mach/common.h @@ -18,15 +18,6 @@ extern int shmobile_enter_wfi(struct cpuidle_device *dev, struct cpuidle_driver *drv, int index); extern void shmobile_cpuidle_set_driver(struct cpuidle_driver *drv); -extern void sh7367_init_irq(void); -extern void sh7367_map_io(void); -extern void sh7367_add_early_devices(void); -extern void sh7367_add_standard_devices(void); -extern void sh7367_clock_init(void); -extern void sh7367_pinmux_init(void); -extern struct clk sh7367_extalb1_clk; -extern struct clk sh7367_extal2_clk; - extern void sh7377_init_irq(void); extern void sh7377_map_io(void); extern void sh7377_add_early_devices(void); diff --git a/arch/arm/mach-shmobile/include/mach/sh7367.h b/arch/arm/mach-shmobile/include/mach/sh7367.h deleted file mode 100644 index 52d0de6..0000000 --- a/arch/arm/mach-shmobile/include/mach/sh7367.h +++ /dev/null @@ -1,332 +0,0 @@ -#ifndef __ASM_SH7367_H__ -#define __ASM_SH7367_H__ - -/* Pin Function Controller: - * GPIO_FN_xx - GPIO used to select pin function - * GPIO_PORTxx - GPIO mapped to real I/O pin on CPU - */ -enum { - /* 49-1 -> 49-6 (GPIO) */ - GPIO_PORT0, GPIO_PORT1, GPIO_PORT2, GPIO_PORT3, GPIO_PORT4, - GPIO_PORT5, GPIO_PORT6, GPIO_PORT7, GPIO_PORT8, GPIO_PORT9, - - GPIO_PORT10, GPIO_PORT11, GPIO_PORT12, GPIO_PORT13, GPIO_PORT14, - GPIO_PORT15, GPIO_PORT16, GPIO_PORT17, GPIO_PORT18, GPIO_PORT19, - - GPIO_PORT20, GPIO_PORT21, GPIO_PORT22, GPIO_PORT23, GPIO_PORT24, - GPIO_PORT25, GPIO_PORT26, GPIO_PORT27, GPIO_PORT28, GPIO_PORT29, - - GPIO_PORT30, GPIO_PORT31, GPIO_PORT32, GPIO_PORT33, GPIO_PORT34, - GPIO_PORT35, GPIO_PORT36, GPIO_PORT37, GPIO_PORT38, GPIO_PORT39, - - GPIO_PORT40, GPIO_PORT41, GPIO_PORT42, GPIO_PORT43, GPIO_PORT44, - GPIO_PORT45, GPIO_PORT46, GPIO_PORT47, GPIO_PORT48, GPIO_PORT49, - - GPIO_PORT50, GPIO_PORT51, GPIO_PORT52, GPIO_PORT53, GPIO_PORT54, - GPIO_PORT55, GPIO_PORT56, GPIO_PORT57, GPIO_PORT58, GPIO_PORT59, - - GPIO_PORT60, GPIO_PORT61, GPIO_PORT62, GPIO_PORT63, GPIO_PORT64, - GPIO_PORT65, GPIO_PORT66, GPIO_PORT67, GPIO_PORT68, GPIO_PORT69, - - GPIO_PORT70, GPIO_PORT71, GPIO_PORT72, GPIO_PORT73, GPIO_PORT74, - GPIO_PORT75, GPIO_PORT76, GPIO_PORT77, GPIO_PORT78, GPIO_PORT79, - - GPIO_PORT80, GPIO_PORT81, GPIO_PORT82, GPIO_PORT83, GPIO_PORT84, - GPIO_PORT85, GPIO_PORT86, GPIO_PORT87, GPIO_PORT88, GPIO_PORT89, - - GPIO_PORT90, GPIO_PORT91, GPIO_PORT92, GPIO_PORT93, GPIO_PORT94, - GPIO_PORT95, GPIO_PORT96, GPIO_PORT97, GPIO_PORT98, GPIO_PORT99, - - GPIO_PORT100, GPIO_PORT101, GPIO_PORT102, GPIO_PORT103, GPIO_PORT104, - GPIO_PORT105, GPIO_PORT106, GPIO_PORT107, GPIO_PORT108, GPIO_PORT109, - - GPIO_PORT110, GPIO_PORT111, GPIO_PORT112, GPIO_PORT113, GPIO_PORT114, - GPIO_PORT115, GPIO_PORT116, GPIO_PORT117, GPIO_PORT118, GPIO_PORT119, - - GPIO_PORT120, GPIO_PORT121, GPIO_PORT122, GPIO_PORT123, GPIO_PORT124, - GPIO_PORT125, GPIO_PORT126, GPIO_PORT127, GPIO_PORT128, GPIO_PORT129, - - GPIO_PORT130, GPIO_PORT131, GPIO_PORT132, GPIO_PORT133, GPIO_PORT134, - GPIO_PORT135, GPIO_PORT136, GPIO_PORT137, GPIO_PORT138, GPIO_PORT139, - - GPIO_PORT140, GPIO_PORT141, GPIO_PORT142, GPIO_PORT143, GPIO_PORT144, - GPIO_PORT145, GPIO_PORT146, GPIO_PORT147, GPIO_PORT148, GPIO_PORT149, - - GPIO_PORT150, GPIO_PORT151, GPIO_PORT152, GPIO_PORT153, GPIO_PORT154, - GPIO_PORT155, GPIO_PORT156, GPIO_PORT157, GPIO_PORT158, GPIO_PORT159, - - GPIO_PORT160, GPIO_PORT161, GPIO_PORT162, GPIO_PORT163, GPIO_PORT164, - GPIO_PORT165, GPIO_PORT166, GPIO_PORT167, GPIO_PORT168, GPIO_PORT169, - - GPIO_PORT170, GPIO_PORT171, GPIO_PORT172, GPIO_PORT173, GPIO_PORT174, - GPIO_PORT175, GPIO_PORT176, GPIO_PORT177, GPIO_PORT178, GPIO_PORT179, - - GPIO_PORT180, GPIO_PORT181, GPIO_PORT182, GPIO_PORT183, GPIO_PORT184, - GPIO_PORT185, GPIO_PORT186, GPIO_PORT187, GPIO_PORT188, GPIO_PORT189, - - GPIO_PORT190, GPIO_PORT191, GPIO_PORT192, GPIO_PORT193, GPIO_PORT194, - GPIO_PORT195, GPIO_PORT196, GPIO_PORT197, GPIO_PORT198, GPIO_PORT199, - - GPIO_PORT200, GPIO_PORT201, GPIO_PORT202, GPIO_PORT203, GPIO_PORT204, - GPIO_PORT205, GPIO_PORT206, GPIO_PORT207, GPIO_PORT208, GPIO_PORT209, - - GPIO_PORT210, GPIO_PORT211, GPIO_PORT212, GPIO_PORT213, GPIO_PORT214, - GPIO_PORT215, GPIO_PORT216, GPIO_PORT217, GPIO_PORT218, GPIO_PORT219, - - GPIO_PORT220, GPIO_PORT221, GPIO_PORT222, GPIO_PORT223, GPIO_PORT224, - GPIO_PORT225, GPIO_PORT226, GPIO_PORT227, GPIO_PORT228, GPIO_PORT229, - - GPIO_PORT230, GPIO_PORT231, GPIO_PORT232, GPIO_PORT233, GPIO_PORT234, - GPIO_PORT235, GPIO_PORT236, GPIO_PORT237, GPIO_PORT238, GPIO_PORT239, - - GPIO_PORT240, GPIO_PORT241, GPIO_PORT242, GPIO_PORT243, GPIO_PORT244, - GPIO_PORT245, GPIO_PORT246, GPIO_PORT247, GPIO_PORT248, GPIO_PORT249, - - GPIO_PORT250, GPIO_PORT251, GPIO_PORT252, GPIO_PORT253, GPIO_PORT254, - GPIO_PORT255, GPIO_PORT256, GPIO_PORT257, GPIO_PORT258, GPIO_PORT259, - - GPIO_PORT260, GPIO_PORT261, GPIO_PORT262, GPIO_PORT263, GPIO_PORT264, - GPIO_PORT265, GPIO_PORT266, GPIO_PORT267, GPIO_PORT268, GPIO_PORT269, - - GPIO_PORT270, GPIO_PORT271, GPIO_PORT272, - - /* Special Pull-up / Pull-down Functions */ - GPIO_FN_PORT48_KEYIN0_PU, GPIO_FN_PORT49_KEYIN1_PU, - GPIO_FN_PORT50_KEYIN2_PU, GPIO_FN_PORT55_KEYIN3_PU, - GPIO_FN_PORT56_KEYIN4_PU, GPIO_FN_PORT57_KEYIN5_PU, - GPIO_FN_PORT58_KEYIN6_PU, - - /* 49-1 (FN) */ - GPIO_FN_VBUS0, GPIO_FN_CPORT0, GPIO_FN_CPORT1, GPIO_FN_CPORT2, - GPIO_FN_CPORT3, GPIO_FN_CPORT4, GPIO_FN_CPORT5, GPIO_FN_CPORT6, - GPIO_FN_CPORT7, GPIO_FN_CPORT8, GPIO_FN_CPORT9, GPIO_FN_CPORT10, - GPIO_FN_CPORT11, GPIO_FN_SIN2, GPIO_FN_CPORT12, GPIO_FN_XCTS2, - GPIO_FN_CPORT13, GPIO_FN_RFSPO4, GPIO_FN_CPORT14, GPIO_FN_RFSPO5, - GPIO_FN_CPORT15, GPIO_FN_CPORT16, GPIO_FN_CPORT17, GPIO_FN_SOUT2, - GPIO_FN_CPORT18, GPIO_FN_XRTS2, GPIO_FN_CPORT19, GPIO_FN_CPORT20, - GPIO_FN_RFSPO6, GPIO_FN_CPORT21, GPIO_FN_STATUS0, GPIO_FN_CPORT22, - GPIO_FN_STATUS1, GPIO_FN_CPORT23, GPIO_FN_STATUS2, GPIO_FN_RFSPO7, - GPIO_FN_MPORT0, GPIO_FN_MPORT1, GPIO_FN_B_SYNLD1, GPIO_FN_B_SYNLD2, - GPIO_FN_XMAINPS, GPIO_FN_XDIVPS, GPIO_FN_XIDRST, GPIO_FN_IDCLK, - GPIO_FN_IDIO, GPIO_FN_SOUT1, GPIO_FN_SCIFA4_TXD, - GPIO_FN_M02_BERDAT, GPIO_FN_SIN1, GPIO_FN_SCIFA4_RXD, GPIO_FN_XWUP, - GPIO_FN_XRTS1, GPIO_FN_SCIFA4_RTS, GPIO_FN_M03_BERCLK, - GPIO_FN_XCTS1, GPIO_FN_SCIFA4_CTS, - - /* 49-2 (FN) */ - GPIO_FN_HSU_IQ_AGC6, GPIO_FN_MFG2_IN2, GPIO_FN_MSIOF2_MCK0, - GPIO_FN_HSU_IQ_AGC5, GPIO_FN_MFG2_IN1, GPIO_FN_MSIOF2_MCK1, - GPIO_FN_HSU_IQ_AGC4, GPIO_FN_MSIOF2_RSYNC, - GPIO_FN_HSU_IQ_AGC3, GPIO_FN_MFG2_OUT1, GPIO_FN_MSIOF2_RSCK, - GPIO_FN_HSU_IQ_AGC2, GPIO_FN_PORT42_KEYOUT0, - GPIO_FN_HSU_IQ_AGC1, GPIO_FN_PORT43_KEYOUT1, - GPIO_FN_HSU_IQ_AGC0, GPIO_FN_PORT44_KEYOUT2, - GPIO_FN_HSU_IQ_AGC_ST, GPIO_FN_PORT45_KEYOUT3, - GPIO_FN_HSU_IQ_PDO, GPIO_FN_PORT46_KEYOUT4, - GPIO_FN_HSU_IQ_PYO, GPIO_FN_PORT47_KEYOUT5, - GPIO_FN_HSU_EN_TXMUX_G3MO, GPIO_FN_PORT48_KEYIN0, - GPIO_FN_HSU_I_TXMUX_G3MO, GPIO_FN_PORT49_KEYIN1, - GPIO_FN_HSU_Q_TXMUX_G3MO, GPIO_FN_PORT50_KEYIN2, - GPIO_FN_HSU_SYO, GPIO_FN_PORT51_MSIOF2_TSYNC, - GPIO_FN_HSU_SDO, GPIO_FN_PORT52_MSIOF2_TSCK, - GPIO_FN_HSU_TGTTI_G3MO, GPIO_FN_PORT53_MSIOF2_TXD, - GPIO_FN_B_TIME_STAMP, GPIO_FN_PORT54_MSIOF2_RXD, - GPIO_FN_HSU_SDI, GPIO_FN_PORT55_KEYIN3, - GPIO_FN_HSU_SCO, GPIO_FN_PORT56_KEYIN4, - GPIO_FN_HSU_DREQ, GPIO_FN_PORT57_KEYIN5, - GPIO_FN_HSU_DACK, GPIO_FN_PORT58_KEYIN6, - GPIO_FN_HSU_CLK61M, GPIO_FN_PORT59_MSIOF2_SS1, - GPIO_FN_HSU_XRST, GPIO_FN_PORT60_MSIOF2_SS2, - GPIO_FN_PCMCLKO, GPIO_FN_SYNC8KO, GPIO_FN_DNPCM_A, GPIO_FN_UPPCM_A, - GPIO_FN_XTALB1L, - GPIO_FN_GPS_AGC1, GPIO_FN_SCIFA0_RTS, - GPIO_FN_GPS_AGC2, GPIO_FN_SCIFA0_SCK, - GPIO_FN_GPS_AGC3, GPIO_FN_SCIFA0_TXD, - GPIO_FN_GPS_AGC4, GPIO_FN_SCIFA0_RXD, - GPIO_FN_GPS_PWRD, GPIO_FN_SCIFA0_CTS, - GPIO_FN_GPS_IM, GPIO_FN_GPS_IS, GPIO_FN_GPS_QM, GPIO_FN_GPS_QS, - GPIO_FN_SIUBOMC, GPIO_FN_TPU2TO0, - GPIO_FN_SIUCKB, GPIO_FN_TPU2TO1, - GPIO_FN_SIUBOLR, GPIO_FN_BBIF2_TSYNC, GPIO_FN_TPU2TO2, - GPIO_FN_SIUBOBT, GPIO_FN_BBIF2_TSCK, GPIO_FN_TPU2TO3, - GPIO_FN_SIUBOSLD, GPIO_FN_BBIF2_TXD, GPIO_FN_TPU3TO0, - GPIO_FN_SIUBILR, GPIO_FN_TPU3TO1, - GPIO_FN_SIUBIBT, GPIO_FN_TPU3TO2, - GPIO_FN_SIUBISLD, GPIO_FN_TPU3TO3, - GPIO_FN_NMI, GPIO_FN_TPU4TO0, - GPIO_FN_DNPCM_M, GPIO_FN_TPU4TO1, GPIO_FN_TPU4TO2, GPIO_FN_TPU4TO3, - GPIO_FN_IRQ_TMPB, - GPIO_FN_PWEN, GPIO_FN_MFG1_OUT1, - GPIO_FN_OVCN, GPIO_FN_MFG1_IN1, - GPIO_FN_OVCN2, GPIO_FN_MFG1_IN2, - - /* 49-3 (FN) */ - GPIO_FN_RFSPO1, GPIO_FN_RFSPO2, GPIO_FN_RFSPO3, GPIO_FN_PORT93_VIO_CKO2, - GPIO_FN_USBTERM, GPIO_FN_EXTLP, GPIO_FN_IDIN, - GPIO_FN_SCIFA5_CTS, GPIO_FN_MFG0_IN1, - GPIO_FN_SCIFA5_RTS, GPIO_FN_MFG0_IN2, - GPIO_FN_SCIFA5_RXD, - GPIO_FN_SCIFA5_TXD, - GPIO_FN_SCIFA5_SCK, GPIO_FN_MFG0_OUT1, - GPIO_FN_A0_EA0, GPIO_FN_BS, - GPIO_FN_A14_EA14, GPIO_FN_PORT102_KEYOUT0, - GPIO_FN_A15_EA15, GPIO_FN_PORT103_KEYOUT1, GPIO_FN_DV_CLKOL, - GPIO_FN_A16_EA16, GPIO_FN_PORT104_KEYOUT2, - GPIO_FN_DV_VSYNCL, GPIO_FN_MSIOF0_SS1, - GPIO_FN_A17_EA17, GPIO_FN_PORT105_KEYOUT3, - GPIO_FN_DV_HSYNCL, GPIO_FN_MSIOF0_TSYNC, - GPIO_FN_A18_EA18, GPIO_FN_PORT106_KEYOUT4, - GPIO_FN_DV_DL0, GPIO_FN_MSIOF0_TSCK, - GPIO_FN_A19_EA19, GPIO_FN_PORT107_KEYOUT5, - GPIO_FN_DV_DL1, GPIO_FN_MSIOF0_TXD, - GPIO_FN_A20_EA20, GPIO_FN_PORT108_KEYIN0, - GPIO_FN_DV_DL2, GPIO_FN_MSIOF0_RSCK, - GPIO_FN_A21_EA21, GPIO_FN_PORT109_KEYIN1, - GPIO_FN_DV_DL3, GPIO_FN_MSIOF0_RSYNC, - GPIO_FN_A22_EA22, GPIO_FN_PORT110_KEYIN2, - GPIO_FN_DV_DL4, GPIO_FN_MSIOF0_MCK0, - GPIO_FN_A23_EA23, GPIO_FN_PORT111_KEYIN3, - GPIO_FN_DV_DL5, GPIO_FN_MSIOF0_MCK1, - GPIO_FN_A24_EA24, GPIO_FN_PORT112_KEYIN4, - GPIO_FN_DV_DL6, GPIO_FN_MSIOF0_RXD, - GPIO_FN_A25_EA25, GPIO_FN_PORT113_KEYIN5, - GPIO_FN_DV_DL7, GPIO_FN_MSIOF0_SS2, - GPIO_FN_A26, GPIO_FN_PORT113_KEYIN6, GPIO_FN_DV_CLKIL, - GPIO_FN_D0_ED0_NAF0, GPIO_FN_D1_ED1_NAF1, GPIO_FN_D2_ED2_NAF2, - GPIO_FN_D3_ED3_NAF3, GPIO_FN_D4_ED4_NAF4, GPIO_FN_D5_ED5_NAF5, - GPIO_FN_D6_ED6_NAF6, GPIO_FN_D7_ED7_NAF7, GPIO_FN_D8_ED8_NAF8, - GPIO_FN_D9_ED9_NAF9, GPIO_FN_D10_ED10_NAF10, GPIO_FN_D11_ED11_NAF11, - GPIO_FN_D12_ED12_NAF12, GPIO_FN_D13_ED13_NAF13, - GPIO_FN_D14_ED14_NAF14, GPIO_FN_D15_ED15_NAF15, - GPIO_FN_CS4, GPIO_FN_CS5A, GPIO_FN_CS5B, GPIO_FN_FCE1, - GPIO_FN_CS6B, GPIO_FN_XCS2, GPIO_FN_FCE0, GPIO_FN_CS6A, - GPIO_FN_DACK0, GPIO_FN_WAIT, GPIO_FN_DREQ0, GPIO_FN_RD_XRD, - GPIO_FN_A27, GPIO_FN_RDWR_XWE, GPIO_FN_WE0_XWR0_FWE, - GPIO_FN_WE1_XWR1, GPIO_FN_FRB, GPIO_FN_CKO, - GPIO_FN_NBRSTOUT, GPIO_FN_NBRST, - - /* 49-4 (FN) */ - GPIO_FN_RFSPO0, GPIO_FN_PORT146_VIO_CKO2, GPIO_FN_TSTMD, - GPIO_FN_VIO_VD, GPIO_FN_VIO_HD, - GPIO_FN_VIO_D0, GPIO_FN_VIO_D1, GPIO_FN_VIO_D2, - GPIO_FN_VIO_D3, GPIO_FN_VIO_D4, GPIO_FN_VIO_D5, - GPIO_FN_VIO_D6, GPIO_FN_VIO_D7, GPIO_FN_VIO_D8, - GPIO_FN_VIO_D9, GPIO_FN_VIO_D10, GPIO_FN_VIO_D11, - GPIO_FN_VIO_D12, GPIO_FN_VIO_D13, GPIO_FN_VIO_D14, - GPIO_FN_VIO_D15, GPIO_FN_VIO_CLK, GPIO_FN_VIO_FIELD, - GPIO_FN_VIO_CKO, - GPIO_FN_MFG3_IN1, GPIO_FN_MFG3_IN2, - GPIO_FN_M9_SLCD_A01, GPIO_FN_MFG3_OUT1, GPIO_FN_TPU0TO0, - GPIO_FN_M10_SLCD_CK1, GPIO_FN_MFG4_IN1, GPIO_FN_TPU0TO1, - GPIO_FN_M11_SLCD_SO1, GPIO_FN_MFG4_IN2, GPIO_FN_TPU0TO2, - GPIO_FN_M12_SLCD_CE1, GPIO_FN_MFG4_OUT1, GPIO_FN_TPU0TO3, - GPIO_FN_LCDD0, GPIO_FN_PORT175_KEYOUT0, GPIO_FN_DV_D0, - GPIO_FN_SIUCKA, GPIO_FN_MFG0_OUT2, - GPIO_FN_LCDD1, GPIO_FN_PORT176_KEYOUT1, GPIO_FN_DV_D1, - GPIO_FN_SIUAOLR, GPIO_FN_BBIF2_TSYNC1, - GPIO_FN_LCDD2, GPIO_FN_PORT177_KEYOUT2, GPIO_FN_DV_D2, - GPIO_FN_SIUAOBT, GPIO_FN_BBIF2_TSCK1, - GPIO_FN_LCDD3, GPIO_FN_PORT178_KEYOUT3, GPIO_FN_DV_D3, - GPIO_FN_SIUAOSLD, GPIO_FN_BBIF2_TXD1, - GPIO_FN_LCDD4, GPIO_FN_PORT179_KEYOUT4, GPIO_FN_DV_D4, - GPIO_FN_SIUAISPD, GPIO_FN_MFG1_OUT2, - GPIO_FN_LCDD5, GPIO_FN_PORT180_KEYOUT5, GPIO_FN_DV_D5, - GPIO_FN_SIUAILR, GPIO_FN_MFG2_OUT2, - GPIO_FN_LCDD6, GPIO_FN_DV_D6, - GPIO_FN_SIUAIBT, GPIO_FN_MFG3_OUT2, GPIO_FN_XWR2, - GPIO_FN_LCDD7, GPIO_FN_DV_D7, - GPIO_FN_SIUAISLD, GPIO_FN_MFG4_OUT2, GPIO_FN_XWR3, - GPIO_FN_LCDD8, GPIO_FN_DV_D8, GPIO_FN_D16, GPIO_FN_ED16, - GPIO_FN_LCDD9, GPIO_FN_DV_D9, GPIO_FN_D17, GPIO_FN_ED17, - GPIO_FN_LCDD10, GPIO_FN_DV_D10, GPIO_FN_D18, GPIO_FN_ED18, - GPIO_FN_LCDD11, GPIO_FN_DV_D11, GPIO_FN_D19, GPIO_FN_ED19, - GPIO_FN_LCDD12, GPIO_FN_DV_D12, GPIO_FN_D20, GPIO_FN_ED20, - GPIO_FN_LCDD13, GPIO_FN_DV_D13, GPIO_FN_D21, GPIO_FN_ED21, - GPIO_FN_LCDD14, GPIO_FN_DV_D14, GPIO_FN_D22, GPIO_FN_ED22, - GPIO_FN_LCDD15, GPIO_FN_DV_D15, GPIO_FN_D23, GPIO_FN_ED23, - GPIO_FN_LCDD16, GPIO_FN_DV_HSYNC, GPIO_FN_D24, GPIO_FN_ED24, - GPIO_FN_LCDD17, GPIO_FN_DV_VSYNC, GPIO_FN_D25, GPIO_FN_ED25, - GPIO_FN_LCDD18, GPIO_FN_DREQ2, GPIO_FN_MSIOF0L_TSCK, - GPIO_FN_D26, GPIO_FN_ED26, - GPIO_FN_LCDD19, GPIO_FN_MSIOF0L_TSYNC, - GPIO_FN_D27, GPIO_FN_ED27, - GPIO_FN_LCDD20, GPIO_FN_TS_SPSYNC1, GPIO_FN_MSIOF0L_MCK0, - GPIO_FN_D28, GPIO_FN_ED28, - GPIO_FN_LCDD21, GPIO_FN_TS_SDAT1, GPIO_FN_MSIOF0L_MCK1, - GPIO_FN_D29, GPIO_FN_ED29, - GPIO_FN_LCDD22, GPIO_FN_TS_SDEN1, GPIO_FN_MSIOF0L_SS1, - GPIO_FN_D30, GPIO_FN_ED30, - GPIO_FN_LCDD23, GPIO_FN_TS_SCK1, GPIO_FN_MSIOF0L_SS2, - GPIO_FN_D31, GPIO_FN_ED31, - GPIO_FN_LCDDCK, GPIO_FN_LCDWR, GPIO_FN_DV_CKO, GPIO_FN_SIUAOSPD, - GPIO_FN_LCDRD, GPIO_FN_DACK2, GPIO_FN_MSIOF0L_RSYNC, - - - /* 49-5 (FN) */ - GPIO_FN_LCDHSYN, GPIO_FN_LCDCS, GPIO_FN_LCDCS2, GPIO_FN_DACK3, - GPIO_FN_LCDDISP, GPIO_FN_LCDRS, GPIO_FN_DREQ3, GPIO_FN_MSIOF0L_RSCK, - GPIO_FN_LCDCSYN, GPIO_FN_LCDCSYN2, GPIO_FN_DV_CKI, - GPIO_FN_LCDLCLK, GPIO_FN_DREQ1, GPIO_FN_MSIOF0L_RXD, - GPIO_FN_LCDDON, GPIO_FN_LCDDON2, GPIO_FN_DACK1, GPIO_FN_MSIOF0L_TXD, - GPIO_FN_VIO_DR0, GPIO_FN_VIO_DR1, GPIO_FN_VIO_DR2, GPIO_FN_VIO_DR3, - GPIO_FN_VIO_DR4, GPIO_FN_VIO_DR5, GPIO_FN_VIO_DR6, GPIO_FN_VIO_DR7, - GPIO_FN_VIO_VDR, GPIO_FN_VIO_HDR, - GPIO_FN_VIO_CLKR, GPIO_FN_VIO_CKOR, - GPIO_FN_SCIFA1_TXD, GPIO_FN_GPS_PGFA0, - GPIO_FN_SCIFA1_SCK, GPIO_FN_GPS_PGFA1, - GPIO_FN_SCIFA1_RTS, GPIO_FN_GPS_EPPSINMON, - GPIO_FN_SCIFA1_RXD, GPIO_FN_SCIFA1_CTS, - GPIO_FN_MSIOF1_TXD, GPIO_FN_SCIFA1_TXD2, GPIO_FN_GPS_TXD, - GPIO_FN_MSIOF1_TSYNC, GPIO_FN_SCIFA1_CTS2, GPIO_FN_I2C_SDA2, - GPIO_FN_MSIOF1_TSCK, GPIO_FN_SCIFA1_SCK2, - GPIO_FN_MSIOF1_RXD, GPIO_FN_SCIFA1_RXD2, GPIO_FN_GPS_RXD, - GPIO_FN_MSIOF1_RSCK, GPIO_FN_SCIFA1_RTS2, - GPIO_FN_MSIOF1_RSYNC, GPIO_FN_I2C_SCL2, - GPIO_FN_MSIOF1_MCK0, GPIO_FN_MSIOF1_MCK1, - GPIO_FN_MSIOF1_SS1, GPIO_FN_EDBGREQ3, - GPIO_FN_MSIOF1_SS2, - GPIO_FN_PORT236_IROUT, GPIO_FN_IRDA_OUT, - GPIO_FN_IRDA_IN, GPIO_FN_IRDA_FIRSEL, - GPIO_FN_TPU1TO0, GPIO_FN_TS_SPSYNC3, - GPIO_FN_TPU1TO1, GPIO_FN_TS_SDAT3, - GPIO_FN_TPU1TO2, GPIO_FN_TS_SDEN3, GPIO_FN_PORT241_MSIOF2_SS1, - GPIO_FN_TPU1TO3, GPIO_FN_PORT242_MSIOF2_TSCK, - GPIO_FN_M13_BSW, GPIO_FN_PORT243_MSIOF2_TSYNC, - GPIO_FN_M14_GSW, GPIO_FN_PORT244_MSIOF2_TXD, - GPIO_FN_PORT245_IROUT, GPIO_FN_M15_RSW, - GPIO_FN_SOUT3, GPIO_FN_SCIFA2_TXD1, - GPIO_FN_SIN3, GPIO_FN_SCIFA2_RXD1, - GPIO_FN_XRTS3, GPIO_FN_SCIFA2_RTS1, GPIO_FN_PORT248_MSIOF2_SS2, - GPIO_FN_XCTS3, GPIO_FN_SCIFA2_CTS1, GPIO_FN_PORT249_MSIOF2_RXD, - GPIO_FN_DINT, GPIO_FN_SCIFA2_SCK1, GPIO_FN_TS_SCK3, - GPIO_FN_SDHICLK0, GPIO_FN_TCK2, - GPIO_FN_SDHICD0, - GPIO_FN_SDHID0_0, GPIO_FN_TMS2, - GPIO_FN_SDHID0_1, GPIO_FN_TDO2, - GPIO_FN_SDHID0_2, GPIO_FN_TDI2, - GPIO_FN_SDHID0_3, GPIO_FN_RTCK2, - - /* 49-6 (FN) */ - GPIO_FN_SDHICMD0, GPIO_FN_TRST2, - GPIO_FN_SDHIWP0, GPIO_FN_EDBGREQ2, - GPIO_FN_SDHICLK1, GPIO_FN_TCK3, - GPIO_FN_SDHID1_0, GPIO_FN_M11_SLCD_SO2, - GPIO_FN_TS_SPSYNC2, GPIO_FN_TMS3, - GPIO_FN_SDHID1_1, GPIO_FN_M9_SLCD_AO2, - GPIO_FN_TS_SDAT2, GPIO_FN_TDO3, - GPIO_FN_SDHID1_2, GPIO_FN_M10_SLCD_CK2, - GPIO_FN_TS_SDEN2, GPIO_FN_TDI3, - GPIO_FN_SDHID1_3, GPIO_FN_M12_SLCD_CE2, - GPIO_FN_TS_SCK2, GPIO_FN_RTCK3, - GPIO_FN_SDHICMD1, GPIO_FN_TRST3, - GPIO_FN_SDHICLK2, GPIO_FN_SCIFB_SCK, - GPIO_FN_SDHID2_0, GPIO_FN_SCIFB_TXD, - GPIO_FN_SDHID2_1, GPIO_FN_SCIFB_CTS, - GPIO_FN_SDHID2_2, GPIO_FN_SCIFB_RXD, - GPIO_FN_SDHID2_3, GPIO_FN_SCIFB_RTS, - GPIO_FN_SDHICMD2, - GPIO_FN_RESETOUTS, - GPIO_FN_DIVLOCK, -}; - -#endif /* __ASM_SH7367_H__ */ diff --git a/arch/arm/mach-shmobile/intc-sh7367.c b/arch/arm/mach-shmobile/intc-sh7367.c deleted file mode 100644 index 5bf7764..0000000 --- a/arch/arm/mach-shmobile/intc-sh7367.c +++ /dev/null @@ -1,413 +0,0 @@ -/* - * sh7367 processor support - INTC hardware block - * - * Copyright (C) 2010 Magnus Damm - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -enum { - UNUSED_INTCA = 0, - ENABLED, - DISABLED, - - /* interrupt sources INTCA */ - DIRC, - CRYPT1_ERR, CRYPT2_STD, - IIC1_ALI1, IIC1_TACKI1, IIC1_WAITI1, IIC1_DTEI1, - ARM11_IRQPMU, ARM11_COMMTX, ARM11_COMMRX, - ETM11_ACQCMP, ETM11_FULL, - MFI_MFIM, MFI_MFIS, - BBIF1, BBIF2, - USBDMAC_USHDMI, - USBHS_USHI0, USBHS_USHI1, - CMT1_CMT10, CMT1_CMT11, CMT1_CMT12, CMT1_CMT13, CMT2, CMT3, - KEYSC_KEY, - SCIFA0, SCIFA1, SCIFA2, SCIFA3, - MSIOF2, MSIOF1, - SCIFA4, SCIFA5, SCIFB, - FLCTL_FLSTEI, FLCTL_FLTENDI, FLCTL_FLTREQ0I, FLCTL_FLTREQ1I, - SDHI0, - SDHI1, - MSU_MSU, MSU_MSU2, - IREM, - SIU, - SPU, - IRDA, - TPU0, TPU1, TPU2, TPU3, TPU4, - LCRC, - PINT1, PINT2, - TTI20, - MISTY, - DDM, - SDHI2, - RWDT0, RWDT1, - DMAC_1_DEI0, DMAC_1_DEI1, DMAC_1_DEI2, DMAC_1_DEI3, - DMAC_2_DEI4, DMAC_2_DEI5, DMAC_2_DADERR, - DMAC2_1_DEI0, DMAC2_1_DEI1, DMAC2_1_DEI2, DMAC2_1_DEI3, - DMAC2_2_DEI4, DMAC2_2_DEI5, DMAC2_2_DADERR, - DMAC3_1_DEI0, DMAC3_1_DEI1, DMAC3_1_DEI2, DMAC3_1_DEI3, - DMAC3_2_DEI4, DMAC3_2_DEI5, DMAC3_2_DADERR, - - /* interrupt groups INTCA */ - DMAC_1, DMAC_2, DMAC2_1, DMAC2_2, DMAC3_1, DMAC3_2, - ETM11, ARM11, USBHS, FLCTL, IIC1 -}; - -static struct intc_vect intca_vectors[] __initdata = { - INTC_VECT(DIRC, 0x0560), - INTC_VECT(CRYPT1_ERR, 0x05e0), - INTC_VECT(CRYPT2_STD, 0x0700), - INTC_VECT(IIC1_ALI1, 0x0780), INTC_VECT(IIC1_TACKI1, 0x07a0), - INTC_VECT(IIC1_WAITI1, 0x07c0), INTC_VECT(IIC1_DTEI1, 0x07e0), - INTC_VECT(ARM11_IRQPMU, 0x0800), INTC_VECT(ARM11_COMMTX, 0x0840), - INTC_VECT(ARM11_COMMRX, 0x0860), - INTC_VECT(ETM11_ACQCMP, 0x0880), INTC_VECT(ETM11_FULL, 0x08a0), - INTC_VECT(MFI_MFIM, 0x0900), INTC_VECT(MFI_MFIS, 0x0920), - INTC_VECT(BBIF1, 0x0940), INTC_VECT(BBIF2, 0x0960), - INTC_VECT(USBDMAC_USHDMI, 0x0a00), - INTC_VECT(USBHS_USHI0, 0x0a20), INTC_VECT(USBHS_USHI1, 0x0a40), - INTC_VECT(CMT1_CMT10, 0x0b00), INTC_VECT(CMT1_CMT11, 0x0b20), - INTC_VECT(CMT1_CMT12, 0x0b40), INTC_VECT(CMT1_CMT13, 0x0b60), - INTC_VECT(CMT2, 0x0b80), INTC_VECT(CMT3, 0x0ba0), - INTC_VECT(KEYSC_KEY, 0x0be0), - INTC_VECT(SCIFA0, 0x0c00), INTC_VECT(SCIFA1, 0x0c20), - INTC_VECT(SCIFA2, 0x0c40), INTC_VECT(SCIFA3, 0x0c60), - INTC_VECT(MSIOF2, 0x0c80), INTC_VECT(MSIOF1, 0x0d00), - INTC_VECT(SCIFA4, 0x0d20), INTC_VECT(SCIFA5, 0x0d40), - INTC_VECT(SCIFB, 0x0d60), - INTC_VECT(FLCTL_FLSTEI, 0x0d80), INTC_VECT(FLCTL_FLTENDI, 0x0da0), - INTC_VECT(FLCTL_FLTREQ0I, 0x0dc0), INTC_VECT(FLCTL_FLTREQ1I, 0x0de0), - INTC_VECT(SDHI0, 0x0e00), INTC_VECT(SDHI0, 0x0e20), - INTC_VECT(SDHI0, 0x0e40), INTC_VECT(SDHI0, 0x0e60), - INTC_VECT(SDHI1, 0x0e80), INTC_VECT(SDHI1, 0x0ea0), - INTC_VECT(SDHI1, 0x0ec0), INTC_VECT(SDHI1, 0x0ee0), - INTC_VECT(MSU_MSU, 0x0f20), INTC_VECT(MSU_MSU2, 0x0f40), - INTC_VECT(IREM, 0x0f60), - INTC_VECT(SIU, 0x0fa0), - INTC_VECT(SPU, 0x0fc0), - INTC_VECT(IRDA, 0x0480), - INTC_VECT(TPU0, 0x04a0), INTC_VECT(TPU1, 0x04c0), - INTC_VECT(TPU2, 0x04e0), INTC_VECT(TPU3, 0x0500), - INTC_VECT(TPU4, 0x0520), - INTC_VECT(LCRC, 0x0540), - INTC_VECT(PINT1, 0x1000), INTC_VECT(PINT2, 0x1020), - INTC_VECT(TTI20, 0x1100), - INTC_VECT(MISTY, 0x1120), - INTC_VECT(DDM, 0x1140), - INTC_VECT(SDHI2, 0x1200), INTC_VECT(SDHI2, 0x1220), - INTC_VECT(SDHI2, 0x1240), INTC_VECT(SDHI2, 0x1260), - INTC_VECT(RWDT0, 0x1280), INTC_VECT(RWDT1, 0x12a0), - INTC_VECT(DMAC_1_DEI0, 0x2000), INTC_VECT(DMAC_1_DEI1, 0x2020), - INTC_VECT(DMAC_1_DEI2, 0x2040), INTC_VECT(DMAC_1_DEI3, 0x2060), - INTC_VECT(DMAC_2_DEI4, 0x2080), INTC_VECT(DMAC_2_DEI5, 0x20a0), - INTC_VECT(DMAC_2_DADERR, 0x20c0), - INTC_VECT(DMAC2_1_DEI0, 0x2100), INTC_VECT(DMAC2_1_DEI1, 0x2120), - INTC_VECT(DMAC2_1_DEI2, 0x2140), INTC_VECT(DMAC2_1_DEI3, 0x2160), - INTC_VECT(DMAC2_2_DEI4, 0x2180), INTC_VECT(DMAC2_2_DEI5, 0x21a0), - INTC_VECT(DMAC2_2_DADERR, 0x21c0), - INTC_VECT(DMAC3_1_DEI0, 0x2200), INTC_VECT(DMAC3_1_DEI1, 0x2220), - INTC_VECT(DMAC3_1_DEI2, 0x2240), INTC_VECT(DMAC3_1_DEI3, 0x2260), - INTC_VECT(DMAC3_2_DEI4, 0x2280), INTC_VECT(DMAC3_2_DEI5, 0x22a0), - INTC_VECT(DMAC3_2_DADERR, 0x22c0), -}; - -static struct intc_group intca_groups[] __initdata = { - INTC_GROUP(DMAC_1, DMAC_1_DEI0, - DMAC_1_DEI1, DMAC_1_DEI2, DMAC_1_DEI3), - INTC_GROUP(DMAC_2, DMAC_2_DEI4, - DMAC_2_DEI5, DMAC_2_DADERR), - INTC_GROUP(DMAC2_1, DMAC2_1_DEI0, - DMAC2_1_DEI1, DMAC2_1_DEI2, DMAC2_1_DEI3), - INTC_GROUP(DMAC2_2, DMAC2_2_DEI4, - DMAC2_2_DEI5, DMAC2_2_DADERR), - INTC_GROUP(DMAC3_1, DMAC3_1_DEI0, - DMAC3_1_DEI1, DMAC3_1_DEI2, DMAC3_1_DEI3), - INTC_GROUP(DMAC3_2, DMAC3_2_DEI4, - DMAC3_2_DEI5, DMAC3_2_DADERR), - INTC_GROUP(ETM11, ETM11_ACQCMP, ETM11_FULL), - INTC_GROUP(ARM11, ARM11_IRQPMU, ARM11_COMMTX, ARM11_COMMTX), - INTC_GROUP(USBHS, USBHS_USHI0, USBHS_USHI1), - INTC_GROUP(FLCTL, FLCTL_FLSTEI, FLCTL_FLTENDI, - FLCTL_FLTREQ0I, FLCTL_FLTREQ1I), - INTC_GROUP(IIC1, IIC1_ALI1, IIC1_TACKI1, IIC1_WAITI1, IIC1_DTEI1), -}; - -static struct intc_mask_reg intca_mask_registers[] __initdata = { - { 0xe6940080, 0xe69400c0, 8, /* IMR0A / IMCR0A */ - { DMAC2_1_DEI3, DMAC2_1_DEI2, DMAC2_1_DEI1, DMAC2_1_DEI0, - ARM11_IRQPMU, 0, ARM11_COMMTX, ARM11_COMMRX } }, - { 0xe6940084, 0xe69400c4, 8, /* IMR1A / IMCR1A */ - { CRYPT1_ERR, CRYPT2_STD, DIRC, 0, - DMAC_1_DEI3, DMAC_1_DEI2, DMAC_1_DEI1, DMAC_1_DEI0 } }, - { 0xe6940088, 0xe69400c8, 8, /* IMR2A / IMCR2A */ - { PINT1, PINT2, 0, 0, - BBIF1, BBIF2, MFI_MFIS, MFI_MFIM } }, - { 0xe694008c, 0xe69400cc, 8, /* IMR3A / IMCR3A */ - { DMAC3_1_DEI3, DMAC3_1_DEI2, DMAC3_1_DEI1, DMAC3_1_DEI0, - DMAC3_2_DADERR, DMAC3_2_DEI5, DMAC3_2_DEI4, IRDA } }, - { 0xe6940090, 0xe69400d0, 8, /* IMR4A / IMCR4A */ - { DDM, 0, 0, 0, - 0, 0, ETM11_FULL, ETM11_ACQCMP } }, - { 0xe6940094, 0xe69400d4, 8, /* IMR5A / IMCR5A */ - { KEYSC_KEY, DMAC_2_DADERR, DMAC_2_DEI5, DMAC_2_DEI4, - SCIFA3, SCIFA2, SCIFA1, SCIFA0 } }, - { 0xe6940098, 0xe69400d8, 8, /* IMR6A / IMCR6A */ - { SCIFB, SCIFA5, SCIFA4, MSIOF1, - 0, 0, MSIOF2, 0 } }, - { 0xe694009c, 0xe69400dc, 8, /* IMR7A / IMCR7A */ - { DISABLED, ENABLED, ENABLED, ENABLED, - FLCTL_FLTREQ1I, FLCTL_FLTREQ0I, FLCTL_FLTENDI, FLCTL_FLSTEI } }, - { 0xe69400a0, 0xe69400e0, 8, /* IMR8A / IMCR8A */ - { DISABLED, ENABLED, ENABLED, ENABLED, - TTI20, USBDMAC_USHDMI, SPU, SIU } }, - { 0xe69400a4, 0xe69400e4, 8, /* IMR9A / IMCR9A */ - { CMT1_CMT13, CMT1_CMT12, CMT1_CMT11, CMT1_CMT10, - CMT2, USBHS_USHI1, USBHS_USHI0, 0 } }, - { 0xe69400a8, 0xe69400e8, 8, /* IMR10A / IMCR10A */ - { 0, DMAC2_2_DADERR, DMAC2_2_DEI5, DMAC2_2_DEI4, - 0, 0, 0, 0 } }, - { 0xe69400ac, 0xe69400ec, 8, /* IMR11A / IMCR11A */ - { IIC1_DTEI1, IIC1_WAITI1, IIC1_TACKI1, IIC1_ALI1, - LCRC, MSU_MSU2, IREM, MSU_MSU } }, - { 0xe69400b0, 0xe69400f0, 8, /* IMR12A / IMCR12A */ - { 0, 0, TPU0, TPU1, - TPU2, TPU3, TPU4, 0 } }, - { 0xe69400b4, 0xe69400f4, 8, /* IMR13A / IMCR13A */ - { DISABLED, ENABLED, ENABLED, ENABLED, - MISTY, CMT3, RWDT1, RWDT0 } }, -}; - -static struct intc_prio_reg intca_prio_registers[] __initdata = { - { 0xe6940000, 0, 16, 4, /* IPRAA */ { DMAC3_1, DMAC3_2, CMT2, LCRC } }, - { 0xe6940004, 0, 16, 4, /* IPRBA */ { IRDA, ETM11, BBIF1, BBIF2 } }, - { 0xe6940008, 0, 16, 4, /* IPRCA */ { CRYPT1_ERR, CRYPT2_STD, - CMT1_CMT11, ARM11 } }, - { 0xe694000c, 0, 16, 4, /* IPRDA */ { PINT1, PINT2, - CMT1_CMT12, TPU4 } }, - { 0xe6940010, 0, 16, 4, /* IPREA */ { DMAC_1, MFI_MFIS, - MFI_MFIM, USBHS } }, - { 0xe6940014, 0, 16, 4, /* IPRFA */ { KEYSC_KEY, DMAC_2, - 0, CMT1_CMT10 } }, - { 0xe6940018, 0, 16, 4, /* IPRGA */ { SCIFA0, SCIFA1, - SCIFA2, SCIFA3 } }, - { 0xe694001c, 0, 16, 4, /* IPRGH */ { MSIOF2, USBDMAC_USHDMI, - FLCTL, SDHI0 } }, - { 0xe6940020, 0, 16, 4, /* IPRIA */ { MSIOF1, SCIFA4, MSU_MSU, IIC1 } }, - { 0xe6940024, 0, 16, 4, /* IPRJA */ { DMAC2_1, DMAC2_2, SIU, TTI20 } }, - { 0xe6940028, 0, 16, 4, /* IPRKA */ { 0, CMT1_CMT13, IREM, SDHI1 } }, - { 0xe694002c, 0, 16, 4, /* IPRLA */ { TPU0, TPU1, TPU2, TPU3 } }, - { 0xe6940030, 0, 16, 4, /* IPRMA */ { MISTY, CMT3, RWDT1, RWDT0 } }, - { 0xe6940034, 0, 16, 4, /* IPRNA */ { SCIFB, SCIFA5, SPU, DDM } }, - { 0xe6940038, 0, 16, 4, /* IPROA */ { 0, 0, DIRC, SDHI2 } }, -}; - -static struct intc_desc intca_desc __initdata = { - .name = "sh7367-intca", - .force_enable = ENABLED, - .force_disable = DISABLED, - .hw = INTC_HW_DESC(intca_vectors, intca_groups, - intca_mask_registers, intca_prio_registers, - NULL, NULL), -}; - -INTC_IRQ_PINS_16(intca_irq_pins, 0xe6900000, - INTC_VECT, "sh7367-intca-irq-pins"); - -enum { - UNUSED_INTCS = 0, - - INTCS, - - /* interrupt sources INTCS */ - VIO2_VEU0, VIO2_VEU1, VIO2_VEU2, VIO2_VEU3, - VIO3_VOU, - RTDMAC_1_DEI0, RTDMAC_1_DEI1, RTDMAC_1_DEI2, RTDMAC_1_DEI3, - VIO1_CEU, VIO1_BEU0, VIO1_BEU1, VIO1_BEU2, - VPU, - SGX530, - _2DDMAC_2DDM0, _2DDMAC_2DDM1, _2DDMAC_2DDM2, _2DDMAC_2DDM3, - IIC2_ALI2, IIC2_TACKI2, IIC2_WAITI2, IIC2_DTEI2, - IPMMU_IPMMUB, IPMMU_IPMMUS, - RTDMAC_2_DEI4, RTDMAC_2_DEI5, RTDMAC_2_DADERR, - MSIOF, - IIC0_ALI0, IIC0_TACKI0, IIC0_WAITI0, IIC0_DTEI0, - TMU_TUNI0, TMU_TUNI1, TMU_TUNI2, - CMT, - TSIF, - IPMMUI, - MVI3, - ICB, - PEP, - ASA, - BEM, - VE2HO, - HQE, - JPEG, - LCDC, - - /* interrupt groups INTCS */ - _2DDMAC, RTDMAC_1, RTDMAC_2, VEU, BEU, IIC0, IPMMU, IIC2, -}; - -static struct intc_vect intcs_vectors[] = { - INTCS_VECT(VIO2_VEU0, 0x700), INTCS_VECT(VIO2_VEU1, 0x720), - INTCS_VECT(VIO2_VEU2, 0x740), INTCS_VECT(VIO2_VEU3, 0x760), - INTCS_VECT(VIO3_VOU, 0x780), - INTCS_VECT(RTDMAC_1_DEI0, 0x800), INTCS_VECT(RTDMAC_1_DEI1, 0x820), - INTCS_VECT(RTDMAC_1_DEI2, 0x840), INTCS_VECT(RTDMAC_1_DEI3, 0x860), - INTCS_VECT(VIO1_CEU, 0x880), INTCS_VECT(VIO1_BEU0, 0x8a0), - INTCS_VECT(VIO1_BEU1, 0x8c0), INTCS_VECT(VIO1_BEU2, 0x8e0), - INTCS_VECT(VPU, 0x980), - INTCS_VECT(SGX530, 0x9e0), - INTCS_VECT(_2DDMAC_2DDM0, 0xa00), INTCS_VECT(_2DDMAC_2DDM1, 0xa20), - INTCS_VECT(_2DDMAC_2DDM2, 0xa40), INTCS_VECT(_2DDMAC_2DDM3, 0xa60), - INTCS_VECT(IIC2_ALI2, 0xa80), INTCS_VECT(IIC2_TACKI2, 0xaa0), - INTCS_VECT(IIC2_WAITI2, 0xac0), INTCS_VECT(IIC2_DTEI2, 0xae0), - INTCS_VECT(IPMMU_IPMMUB, 0xb20), INTCS_VECT(IPMMU_IPMMUS, 0xb60), - INTCS_VECT(RTDMAC_2_DEI4, 0xb80), INTCS_VECT(RTDMAC_2_DEI5, 0xba0), - INTCS_VECT(RTDMAC_2_DADERR, 0xbc0), - INTCS_VECT(MSIOF, 0xd20), - INTCS_VECT(IIC0_ALI0, 0xe00), INTCS_VECT(IIC0_TACKI0, 0xe20), - INTCS_VECT(IIC0_WAITI0, 0xe40), INTCS_VECT(IIC0_DTEI0, 0xe60), - INTCS_VECT(TMU_TUNI0, 0xe80), INTCS_VECT(TMU_TUNI1, 0xea0), - INTCS_VECT(TMU_TUNI2, 0xec0), - INTCS_VECT(CMT, 0xf00), - INTCS_VECT(TSIF, 0xf20), - INTCS_VECT(IPMMUI, 0xf60), - INTCS_VECT(MVI3, 0x420), - INTCS_VECT(ICB, 0x480), - INTCS_VECT(PEP, 0x4a0), - INTCS_VECT(ASA, 0x4c0), - INTCS_VECT(BEM, 0x4e0), - INTCS_VECT(VE2HO, 0x520), - INTCS_VECT(HQE, 0x540), - INTCS_VECT(JPEG, 0x560), - INTCS_VECT(LCDC, 0x580), - - INTC_VECT(INTCS, 0xf80), -}; - -static struct intc_group intcs_groups[] __initdata = { - INTC_GROUP(_2DDMAC, _2DDMAC_2DDM0, _2DDMAC_2DDM1, - _2DDMAC_2DDM2, _2DDMAC_2DDM3), - INTC_GROUP(RTDMAC_1, RTDMAC_1_DEI0, RTDMAC_1_DEI1, - RTDMAC_1_DEI2, RTDMAC_1_DEI3), - INTC_GROUP(RTDMAC_2, RTDMAC_2_DEI4, RTDMAC_2_DEI5, RTDMAC_2_DADERR), - INTC_GROUP(VEU, VIO2_VEU0, VIO2_VEU1, VIO2_VEU2, VIO2_VEU3), - INTC_GROUP(BEU, VIO1_BEU0, VIO1_BEU1, VIO1_BEU2), - INTC_GROUP(IIC0, IIC0_ALI0, IIC0_TACKI0, IIC0_WAITI0, IIC0_DTEI0), - INTC_GROUP(IPMMU, IPMMU_IPMMUS, IPMMU_IPMMUB), - INTC_GROUP(IIC2, IIC2_ALI2, IIC2_TACKI2, IIC2_WAITI2, IIC2_DTEI2), -}; - -static struct intc_mask_reg intcs_mask_registers[] = { - { 0xffd20184, 0xffd201c4, 8, /* IMR1SA / IMCR1SA */ - { VIO1_BEU2, VIO1_BEU1, VIO1_BEU0, VIO1_CEU, - VIO2_VEU3, VIO2_VEU2, VIO2_VEU1, VIO2_VEU0 } }, - { 0xffd20188, 0xffd201c8, 8, /* IMR2SA / IMCR2SA */ - { VIO3_VOU, 0, VE2HO, VPU, - 0, 0, 0, 0 } }, - { 0xffd2018c, 0xffd201cc, 8, /* IMR3SA / IMCR3SA */ - { _2DDMAC_2DDM3, _2DDMAC_2DDM2, _2DDMAC_2DDM1, _2DDMAC_2DDM0, - BEM, ASA, PEP, ICB } }, - { 0xffd20190, 0xffd201d0, 8, /* IMR4SA / IMCR4SA */ - { 0, 0, MVI3, 0, - JPEG, HQE, 0, LCDC } }, - { 0xffd20194, 0xffd201d4, 8, /* IMR5SA / IMCR5SA */ - { 0, RTDMAC_2_DADERR, RTDMAC_2_DEI5, RTDMAC_2_DEI4, - RTDMAC_1_DEI3, RTDMAC_1_DEI2, RTDMAC_1_DEI1, RTDMAC_1_DEI0 } }, - { 0xffd20198, 0xffd201d8, 8, /* IMR6SA / IMCR6SA */ - { 0, 0, MSIOF, 0, - SGX530, 0, 0, 0 } }, - { 0xffd2019c, 0xffd201dc, 8, /* IMR7SA / IMCR7SA */ - { 0, TMU_TUNI2, TMU_TUNI1, TMU_TUNI0, - 0, 0, 0, 0 } }, - { 0xffd201a4, 0xffd201e4, 8, /* IMR9SA / IMCR9SA */ - { 0, 0, 0, CMT, - IIC2_DTEI2, IIC2_WAITI2, IIC2_TACKI2, IIC2_ALI2 } }, - { 0xffd201a8, 0xffd201e8, 8, /* IMR10SA / IMCR10SA */ - { IPMMU_IPMMUS, 0, IPMMU_IPMMUB, 0, - 0, 0, 0, 0 } }, - { 0xffd201ac, 0xffd201ec, 8, /* IMR11SA / IMCR11SA */ - { IIC0_DTEI0, IIC0_WAITI0, IIC0_TACKI0, IIC0_ALI0, - 0, 0, IPMMUI, TSIF } }, - { 0xffd20104, 0, 16, /* INTAMASK */ - { 0, 0, 0, 0, 0, 0, 0, 0, - 0, 0, 0, 0, 0, 0, 0, INTCS } }, -}; - -/* Priority is needed for INTCA to receive the INTCS interrupt */ -static struct intc_prio_reg intcs_prio_registers[] = { - { 0xffd20000, 0, 16, 4, /* IPRAS */ { 0, MVI3, _2DDMAC, ICB } }, - { 0xffd20004, 0, 16, 4, /* IPRBS */ { JPEG, LCDC, 0, 0 } }, - { 0xffd20008, 0, 16, 4, /* IPRCS */ { BBIF2, 0, 0, 0 } }, - { 0xffd20010, 0, 16, 4, /* IPRES */ { RTDMAC_1, VIO1_CEU, 0, VPU } }, - { 0xffd20014, 0, 16, 4, /* IPRFS */ { 0, RTDMAC_2, 0, CMT } }, - { 0xffd20018, 0, 16, 4, /* IPRGS */ { TMU_TUNI0, TMU_TUNI1, - TMU_TUNI2, 0 } }, - { 0xffd2001c, 0, 16, 4, /* IPRHS */ { 0, VIO3_VOU, VEU, BEU } }, - { 0xffd20020, 0, 16, 4, /* IPRIS */ { 0, MSIOF, TSIF, IIC0 } }, - { 0xffd20024, 0, 16, 4, /* IPRJS */ { 0, SGX530, 0, 0 } }, - { 0xffd20028, 0, 16, 4, /* IPRKS */ { BEM, ASA, IPMMUI, PEP } }, - { 0xffd2002c, 0, 16, 4, /* IPRLS */ { IPMMU, 0, VE2HO, HQE } }, - { 0xffd20030, 0, 16, 4, /* IPRMS */ { IIC2, 0, 0, 0 } }, -}; - -static struct resource intcs_resources[] __initdata = { - [0] = { - .start = 0xffd20000, - .end = 0xffd2ffff, - .flags = IORESOURCE_MEM, - } -}; - -static struct intc_desc intcs_desc __initdata = { - .name = "sh7367-intcs", - .resource = intcs_resources, - .num_resources = ARRAY_SIZE(intcs_resources), - .hw = INTC_HW_DESC(intcs_vectors, intcs_groups, intcs_mask_registers, - intcs_prio_registers, NULL, NULL), -}; - -static void intcs_demux(unsigned int irq, struct irq_desc *desc) -{ - void __iomem *reg = (void *)irq_get_handler_data(irq); - unsigned int evtcodeas = ioread32(reg); - - generic_handle_irq(intcs_evt2irq(evtcodeas)); -} - -void __init sh7367_init_irq(void) -{ - void __iomem *intevtsa = ioremap_nocache(0xffd20100, PAGE_SIZE); - - register_intc_controller(&intca_desc); - register_intc_controller(&intca_irq_pins_desc); - register_intc_controller(&intcs_desc); - - /* demux using INTEVTSA */ - irq_set_handler_data(evt2irq(0xf80), (void *)intevtsa); - irq_set_chained_handler(evt2irq(0xf80), intcs_demux); -} diff --git a/arch/arm/mach-shmobile/pfc-sh7367.c b/arch/arm/mach-shmobile/pfc-sh7367.c deleted file mode 100644 index c0c137f..0000000 --- a/arch/arm/mach-shmobile/pfc-sh7367.c +++ /dev/null @@ -1,1727 +0,0 @@ -/* - * sh7367 processor support - PFC hardware block - * - * Copyright (C) 2010 Magnus Damm - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ -#include -#include -#include -#include - -#define CPU_ALL_PORT(fn, pfx, sfx) \ - PORT_10(fn, pfx, sfx), PORT_90(fn, pfx, sfx), \ - PORT_10(fn, pfx##10, sfx), PORT_90(fn, pfx##1, sfx), \ - PORT_10(fn, pfx##20, sfx), PORT_10(fn, pfx##21, sfx), \ - PORT_10(fn, pfx##22, sfx), PORT_10(fn, pfx##23, sfx), \ - PORT_10(fn, pfx##24, sfx), PORT_10(fn, pfx##25, sfx), \ - PORT_10(fn, pfx##26, sfx), PORT_1(fn, pfx##270, sfx), \ - PORT_1(fn, pfx##271, sfx), PORT_1(fn, pfx##272, sfx) - -enum { - PINMUX_RESERVED = 0, - - PINMUX_DATA_BEGIN, - PORT_ALL(DATA), /* PORT0_DATA -> PORT272_DATA */ - PINMUX_DATA_END, - - PINMUX_INPUT_BEGIN, - PORT_ALL(IN), /* PORT0_IN -> PORT272_IN */ - PINMUX_INPUT_END, - - PINMUX_INPUT_PULLUP_BEGIN, - PORT_ALL(IN_PU), /* PORT0_IN_PU -> PORT272_IN_PU */ - PINMUX_INPUT_PULLUP_END, - - PINMUX_INPUT_PULLDOWN_BEGIN, - PORT_ALL(IN_PD), /* PORT0_IN_PD -> PORT272_IN_PD */ - PINMUX_INPUT_PULLDOWN_END, - - PINMUX_OUTPUT_BEGIN, - PORT_ALL(OUT), /* PORT0_OUT -> PORT272_OUT */ - PINMUX_OUTPUT_END, - - PINMUX_FUNCTION_BEGIN, - PORT_ALL(FN_IN), /* PORT0_FN_IN -> PORT272_FN_IN */ - PORT_ALL(FN_OUT), /* PORT0_FN_OUT -> PORT272_FN_OUT */ - PORT_ALL(FN0), /* PORT0_FN0 -> PORT272_FN0 */ - PORT_ALL(FN1), /* PORT0_FN1 -> PORT272_FN1 */ - PORT_ALL(FN2), /* PORT0_FN2 -> PORT272_FN2 */ - PORT_ALL(FN3), /* PORT0_FN3 -> PORT272_FN3 */ - PORT_ALL(FN4), /* PORT0_FN4 -> PORT272_FN4 */ - PORT_ALL(FN5), /* PORT0_FN5 -> PORT272_FN5 */ - PORT_ALL(FN6), /* PORT0_FN6 -> PORT272_FN6 */ - PORT_ALL(FN7), /* PORT0_FN7 -> PORT272_FN7 */ - - MSELBCR_MSEL2_1, MSELBCR_MSEL2_0, - PINMUX_FUNCTION_END, - - PINMUX_MARK_BEGIN, - /* Special Pull-up / Pull-down Functions */ - PORT48_KEYIN0_PU_MARK, PORT49_KEYIN1_PU_MARK, - PORT50_KEYIN2_PU_MARK, PORT55_KEYIN3_PU_MARK, - PORT56_KEYIN4_PU_MARK, PORT57_KEYIN5_PU_MARK, - PORT58_KEYIN6_PU_MARK, - - /* 49-1 */ - VBUS0_MARK, CPORT0_MARK, CPORT1_MARK, CPORT2_MARK, - CPORT3_MARK, CPORT4_MARK, CPORT5_MARK, CPORT6_MARK, - CPORT7_MARK, CPORT8_MARK, CPORT9_MARK, CPORT10_MARK, - CPORT11_MARK, SIN2_MARK, CPORT12_MARK, XCTS2_MARK, - CPORT13_MARK, RFSPO4_MARK, CPORT14_MARK, RFSPO5_MARK, - CPORT15_MARK, CPORT16_MARK, CPORT17_MARK, SOUT2_MARK, - CPORT18_MARK, XRTS2_MARK, CPORT19_MARK, CPORT20_MARK, - RFSPO6_MARK, CPORT21_MARK, STATUS0_MARK, CPORT22_MARK, - STATUS1_MARK, CPORT23_MARK, STATUS2_MARK, RFSPO7_MARK, - MPORT0_MARK, MPORT1_MARK, B_SYNLD1_MARK, B_SYNLD2_MARK, - XMAINPS_MARK, XDIVPS_MARK, XIDRST_MARK, IDCLK_MARK, - IDIO_MARK, SOUT1_MARK, SCIFA4_TXD_MARK, - M02_BERDAT_MARK, SIN1_MARK, SCIFA4_RXD_MARK, XWUP_MARK, - XRTS1_MARK, SCIFA4_RTS_MARK, M03_BERCLK_MARK, - XCTS1_MARK, SCIFA4_CTS_MARK, - - /* 49-2 */ - HSU_IQ_AGC6_MARK, MFG2_IN2_MARK, MSIOF2_MCK0_MARK, - HSU_IQ_AGC5_MARK, MFG2_IN1_MARK, MSIOF2_MCK1_MARK, - HSU_IQ_AGC4_MARK, MSIOF2_RSYNC_MARK, - HSU_IQ_AGC3_MARK, MFG2_OUT1_MARK, MSIOF2_RSCK_MARK, - HSU_IQ_AGC2_MARK, PORT42_KEYOUT0_MARK, - HSU_IQ_AGC1_MARK, PORT43_KEYOUT1_MARK, - HSU_IQ_AGC0_MARK, PORT44_KEYOUT2_MARK, - HSU_IQ_AGC_ST_MARK, PORT45_KEYOUT3_MARK, - HSU_IQ_PDO_MARK, PORT46_KEYOUT4_MARK, - HSU_IQ_PYO_MARK, PORT47_KEYOUT5_MARK, - HSU_EN_TXMUX_G3MO_MARK, PORT48_KEYIN0_MARK, - HSU_I_TXMUX_G3MO_MARK, PORT49_KEYIN1_MARK, - HSU_Q_TXMUX_G3MO_MARK, PORT50_KEYIN2_MARK, - HSU_SYO_MARK, PORT51_MSIOF2_TSYNC_MARK, - HSU_SDO_MARK, PORT52_MSIOF2_TSCK_MARK, - HSU_TGTTI_G3MO_MARK, PORT53_MSIOF2_TXD_MARK, - B_TIME_STAMP_MARK, PORT54_MSIOF2_RXD_MARK, - HSU_SDI_MARK, PORT55_KEYIN3_MARK, - HSU_SCO_MARK, PORT56_KEYIN4_MARK, - HSU_DREQ_MARK, PORT57_KEYIN5_MARK, - HSU_DACK_MARK, PORT58_KEYIN6_MARK, - HSU_CLK61M_MARK, PORT59_MSIOF2_SS1_MARK, - HSU_XRST_MARK, PORT60_MSIOF2_SS2_MARK, - PCMCLKO_MARK, SYNC8KO_MARK, DNPCM_A_MARK, UPPCM_A_MARK, - XTALB1L_MARK, - GPS_AGC1_MARK, SCIFA0_RTS_MARK, - GPS_AGC2_MARK, SCIFA0_SCK_MARK, - GPS_AGC3_MARK, SCIFA0_TXD_MARK, - GPS_AGC4_MARK, SCIFA0_RXD_MARK, - GPS_PWRD_MARK, SCIFA0_CTS_MARK, - GPS_IM_MARK, GPS_IS_MARK, GPS_QM_MARK, GPS_QS_MARK, - SIUBOMC_MARK, TPU2TO0_MARK, - SIUCKB_MARK, TPU2TO1_MARK, - SIUBOLR_MARK, BBIF2_TSYNC_MARK, TPU2TO2_MARK, - SIUBOBT_MARK, BBIF2_TSCK_MARK, TPU2TO3_MARK, - SIUBOSLD_MARK, BBIF2_TXD_MARK, TPU3TO0_MARK, - SIUBILR_MARK, TPU3TO1_MARK, - SIUBIBT_MARK, TPU3TO2_MARK, - SIUBISLD_MARK, TPU3TO3_MARK, - NMI_MARK, TPU4TO0_MARK, - DNPCM_M_MARK, TPU4TO1_MARK, TPU4TO2_MARK, TPU4TO3_MARK, - IRQ_TMPB_MARK, - PWEN_MARK, MFG1_OUT1_MARK, - OVCN_MARK, MFG1_IN1_MARK, - OVCN2_MARK, MFG1_IN2_MARK, - - /* 49-3 */ - RFSPO1_MARK, RFSPO2_MARK, RFSPO3_MARK, PORT93_VIO_CKO2_MARK, - USBTERM_MARK, EXTLP_MARK, IDIN_MARK, - SCIFA5_CTS_MARK, MFG0_IN1_MARK, - SCIFA5_RTS_MARK, MFG0_IN2_MARK, - SCIFA5_RXD_MARK, - SCIFA5_TXD_MARK, - SCIFA5_SCK_MARK, MFG0_OUT1_MARK, - A0_EA0_MARK, BS_MARK, - A14_EA14_MARK, PORT102_KEYOUT0_MARK, - A15_EA15_MARK, PORT103_KEYOUT1_MARK, DV_CLKOL_MARK, - A16_EA16_MARK, PORT104_KEYOUT2_MARK, - DV_VSYNCL_MARK, MSIOF0_SS1_MARK, - A17_EA17_MARK, PORT105_KEYOUT3_MARK, - DV_HSYNCL_MARK, MSIOF0_TSYNC_MARK, - A18_EA18_MARK, PORT106_KEYOUT4_MARK, - DV_DL0_MARK, MSIOF0_TSCK_MARK, - A19_EA19_MARK, PORT107_KEYOUT5_MARK, - DV_DL1_MARK, MSIOF0_TXD_MARK, - A20_EA20_MARK, PORT108_KEYIN0_MARK, - DV_DL2_MARK, MSIOF0_RSCK_MARK, - A21_EA21_MARK, PORT109_KEYIN1_MARK, - DV_DL3_MARK, MSIOF0_RSYNC_MARK, - A22_EA22_MARK, PORT110_KEYIN2_MARK, - DV_DL4_MARK, MSIOF0_MCK0_MARK, - A23_EA23_MARK, PORT111_KEYIN3_MARK, - DV_DL5_MARK, MSIOF0_MCK1_MARK, - A24_EA24_MARK, PORT112_KEYIN4_MARK, - DV_DL6_MARK, MSIOF0_RXD_MARK, - A25_EA25_MARK, PORT113_KEYIN5_MARK, - DV_DL7_MARK, MSIOF0_SS2_MARK, - A26_MARK, PORT113_KEYIN6_MARK, DV_CLKIL_MARK, - D0_ED0_NAF0_MARK, D1_ED1_NAF1_MARK, D2_ED2_NAF2_MARK, - D3_ED3_NAF3_MARK, D4_ED4_NAF4_MARK, D5_ED5_NAF5_MARK, - D6_ED6_NAF6_MARK, D7_ED7_NAF7_MARK, D8_ED8_NAF8_MARK, - D9_ED9_NAF9_MARK, D10_ED10_NAF10_MARK, D11_ED11_NAF11_MARK, - D12_ED12_NAF12_MARK, D13_ED13_NAF13_MARK, - D14_ED14_NAF14_MARK, D15_ED15_NAF15_MARK, - CS4_MARK, CS5A_MARK, CS5B_MARK, FCE1_MARK, - CS6B_MARK, XCS2_MARK, FCE0_MARK, CS6A_MARK, - DACK0_MARK, WAIT_MARK, DREQ0_MARK, RD_XRD_MARK, - A27_MARK, RDWR_XWE_MARK, WE0_XWR0_FWE_MARK, - WE1_XWR1_MARK, FRB_MARK, CKO_MARK, - NBRSTOUT_MARK, NBRST_MARK, - - /* 49-4 */ - RFSPO0_MARK, PORT146_VIO_CKO2_MARK, TSTMD_MARK, - VIO_VD_MARK, VIO_HD_MARK, - VIO_D0_MARK, VIO_D1_MARK, VIO_D2_MARK, - VIO_D3_MARK, VIO_D4_MARK, VIO_D5_MARK, - VIO_D6_MARK, VIO_D7_MARK, VIO_D8_MARK, - VIO_D9_MARK, VIO_D10_MARK, VIO_D11_MARK, - VIO_D12_MARK, VIO_D13_MARK, VIO_D14_MARK, - VIO_D15_MARK, VIO_CLK_MARK, VIO_FIELD_MARK, - VIO_CKO_MARK, - MFG3_IN1_MARK, MFG3_IN2_MARK, - M9_SLCD_A01_MARK, MFG3_OUT1_MARK, TPU0TO0_MARK, - M10_SLCD_CK1_MARK, MFG4_IN1_MARK, TPU0TO1_MARK, - M11_SLCD_SO1_MARK, MFG4_IN2_MARK, TPU0TO2_MARK, - M12_SLCD_CE1_MARK, MFG4_OUT1_MARK, TPU0TO3_MARK, - LCDD0_MARK, PORT175_KEYOUT0_MARK, DV_D0_MARK, - SIUCKA_MARK, MFG0_OUT2_MARK, - LCDD1_MARK, PORT176_KEYOUT1_MARK, DV_D1_MARK, - SIUAOLR_MARK, BBIF2_TSYNC1_MARK, - LCDD2_MARK, PORT177_KEYOUT2_MARK, DV_D2_MARK, - SIUAOBT_MARK, BBIF2_TSCK1_MARK, - LCDD3_MARK, PORT178_KEYOUT3_MARK, DV_D3_MARK, - SIUAOSLD_MARK, BBIF2_TXD1_MARK, - LCDD4_MARK, PORT179_KEYOUT4_MARK, DV_D4_MARK, - SIUAISPD_MARK, MFG1_OUT2_MARK, - LCDD5_MARK, PORT180_KEYOUT5_MARK, DV_D5_MARK, - SIUAILR_MARK, MFG2_OUT2_MARK, - LCDD6_MARK, DV_D6_MARK, - SIUAIBT_MARK, MFG3_OUT2_MARK, XWR2_MARK, - LCDD7_MARK, DV_D7_MARK, - SIUAISLD_MARK, MFG4_OUT2_MARK, XWR3_MARK, - LCDD8_MARK, DV_D8_MARK, D16_MARK, ED16_MARK, - LCDD9_MARK, DV_D9_MARK, D17_MARK, ED17_MARK, - LCDD10_MARK, DV_D10_MARK, D18_MARK, ED18_MARK, - LCDD11_MARK, DV_D11_MARK, D19_MARK, ED19_MARK, - LCDD12_MARK, DV_D12_MARK, D20_MARK, ED20_MARK, - LCDD13_MARK, DV_D13_MARK, D21_MARK, ED21_MARK, - LCDD14_MARK, DV_D14_MARK, D22_MARK, ED22_MARK, - LCDD15_MARK, DV_D15_MARK, D23_MARK, ED23_MARK, - LCDD16_MARK, DV_HSYNC_MARK, D24_MARK, ED24_MARK, - LCDD17_MARK, DV_VSYNC_MARK, D25_MARK, ED25_MARK, - LCDD18_MARK, DREQ2_MARK, MSIOF0L_TSCK_MARK, - D26_MARK, ED26_MARK, - LCDD19_MARK, MSIOF0L_TSYNC_MARK, - D27_MARK, ED27_MARK, - LCDD20_MARK, TS_SPSYNC1_MARK, MSIOF0L_MCK0_MARK, - D28_MARK, ED28_MARK, - LCDD21_MARK, TS_SDAT1_MARK, MSIOF0L_MCK1_MARK, - D29_MARK, ED29_MARK, - LCDD22_MARK, TS_SDEN1_MARK, MSIOF0L_SS1_MARK, - D30_MARK, ED30_MARK, - LCDD23_MARK, TS_SCK1_MARK, MSIOF0L_SS2_MARK, - D31_MARK, ED31_MARK, - LCDDCK_MARK, LCDWR_MARK, DV_CKO_MARK, SIUAOSPD_MARK, - LCDRD_MARK, DACK2_MARK, MSIOF0L_RSYNC_MARK, - - /* 49-5 */ - LCDHSYN_MARK, LCDCS_MARK, LCDCS2_MARK, DACK3_MARK, - LCDDISP_MARK, LCDRS_MARK, DREQ3_MARK, MSIOF0L_RSCK_MARK, - LCDCSYN_MARK, LCDCSYN2_MARK, DV_CKI_MARK, - LCDLCLK_MARK, DREQ1_MARK, MSIOF0L_RXD_MARK, - LCDDON_MARK, LCDDON2_MARK, DACK1_MARK, MSIOF0L_TXD_MARK, - VIO_DR0_MARK, VIO_DR1_MARK, VIO_DR2_MARK, VIO_DR3_MARK, - VIO_DR4_MARK, VIO_DR5_MARK, VIO_DR6_MARK, VIO_DR7_MARK, - VIO_VDR_MARK, VIO_HDR_MARK, - VIO_CLKR_MARK, VIO_CKOR_MARK, - SCIFA1_TXD_MARK, GPS_PGFA0_MARK, - SCIFA1_SCK_MARK, GPS_PGFA1_MARK, - SCIFA1_RTS_MARK, GPS_EPPSINMON_MARK, - SCIFA1_RXD_MARK, SCIFA1_CTS_MARK, - MSIOF1_TXD_MARK, SCIFA1_TXD2_MARK, GPS_TXD_MARK, - MSIOF1_TSYNC_MARK, SCIFA1_CTS2_MARK, I2C_SDA2_MARK, - MSIOF1_TSCK_MARK, SCIFA1_SCK2_MARK, - MSIOF1_RXD_MARK, SCIFA1_RXD2_MARK, GPS_RXD_MARK, - MSIOF1_RSCK_MARK, SCIFA1_RTS2_MARK, - MSIOF1_RSYNC_MARK, I2C_SCL2_MARK, - MSIOF1_MCK0_MARK, MSIOF1_MCK1_MARK, - MSIOF1_SS1_MARK, EDBGREQ3_MARK, - MSIOF1_SS2_MARK, - PORT236_IROUT_MARK, IRDA_OUT_MARK, - IRDA_IN_MARK, IRDA_FIRSEL_MARK, - TPU1TO0_MARK, TS_SPSYNC3_MARK, - TPU1TO1_MARK, TS_SDAT3_MARK, - TPU1TO2_MARK, TS_SDEN3_MARK, PORT241_MSIOF2_SS1_MARK, - TPU1TO3_MARK, PORT242_MSIOF2_TSCK_MARK, - M13_BSW_MARK, PORT243_MSIOF2_TSYNC_MARK, - M14_GSW_MARK, PORT244_MSIOF2_TXD_MARK, - PORT245_IROUT_MARK, M15_RSW_MARK, - SOUT3_MARK, SCIFA2_TXD1_MARK, - SIN3_MARK, SCIFA2_RXD1_MARK, - XRTS3_MARK, SCIFA2_RTS1_MARK, PORT248_MSIOF2_SS2_MARK, - XCTS3_MARK, SCIFA2_CTS1_MARK, PORT249_MSIOF2_RXD_MARK, - DINT_MARK, SCIFA2_SCK1_MARK, TS_SCK3_MARK, - SDHICLK0_MARK, TCK2_MARK, - SDHICD0_MARK, - SDHID0_0_MARK, TMS2_MARK, - SDHID0_1_MARK, TDO2_MARK, - SDHID0_2_MARK, TDI2_MARK, - SDHID0_3_MARK, RTCK2_MARK, - - /* 49-6 */ - SDHICMD0_MARK, TRST2_MARK, - SDHIWP0_MARK, EDBGREQ2_MARK, - SDHICLK1_MARK, TCK3_MARK, - SDHID1_0_MARK, M11_SLCD_SO2_MARK, - TS_SPSYNC2_MARK, TMS3_MARK, - SDHID1_1_MARK, M9_SLCD_AO2_MARK, - TS_SDAT2_MARK, TDO3_MARK, - SDHID1_2_MARK, M10_SLCD_CK2_MARK, - TS_SDEN2_MARK, TDI3_MARK, - SDHID1_3_MARK, M12_SLCD_CE2_MARK, - TS_SCK2_MARK, RTCK3_MARK, - SDHICMD1_MARK, TRST3_MARK, - SDHICLK2_MARK, SCIFB_SCK_MARK, - SDHID2_0_MARK, SCIFB_TXD_MARK, - SDHID2_1_MARK, SCIFB_CTS_MARK, - SDHID2_2_MARK, SCIFB_RXD_MARK, - SDHID2_3_MARK, SCIFB_RTS_MARK, - SDHICMD2_MARK, - RESETOUTS_MARK, - DIVLOCK_MARK, - PINMUX_MARK_END, -}; - -static pinmux_enum_t pinmux_data[] = { - - /* specify valid pin states for each pin in GPIO mode */ - - /* 49-1 (GPIO) */ - PORT_DATA_I_PD(0), - PORT_DATA_I_PU(1), PORT_DATA_I_PU(2), PORT_DATA_I_PU(3), - PORT_DATA_I_PU(4), PORT_DATA_I_PU(5), PORT_DATA_I_PU(6), - PORT_DATA_I_PU(7), PORT_DATA_I_PU(8), PORT_DATA_I_PU(9), - PORT_DATA_I_PU(10), PORT_DATA_I_PU(11), PORT_DATA_I_PU(12), - PORT_DATA_I_PU(13), - PORT_DATA_IO_PU_PD(14), PORT_DATA_IO_PU_PD(15), - PORT_DATA_O(16), PORT_DATA_O(17), PORT_DATA_O(18), PORT_DATA_O(19), - PORT_DATA_O(20), PORT_DATA_O(21), PORT_DATA_O(22), PORT_DATA_O(23), - PORT_DATA_O(24), PORT_DATA_O(25), PORT_DATA_O(26), - PORT_DATA_I_PD(27), PORT_DATA_I_PD(28), - PORT_DATA_O(29), PORT_DATA_O(30), PORT_DATA_O(31), PORT_DATA_O(32), - PORT_DATA_IO_PU(33), - PORT_DATA_O(34), - PORT_DATA_I_PU(35), - PORT_DATA_O(36), - PORT_DATA_I_PU_PD(37), - - /* 49-2 (GPIO) */ - PORT_DATA_IO_PU_PD(38), - PORT_DATA_IO_PD(39), PORT_DATA_IO_PD(40), PORT_DATA_IO_PD(41), - PORT_DATA_O(42), PORT_DATA_O(43), PORT_DATA_O(44), PORT_DATA_O(45), - PORT_DATA_O(46), PORT_DATA_O(47), - PORT_DATA_I_PU_PD(48), PORT_DATA_I_PU_PD(49), PORT_DATA_I_PU_PD(50), - PORT_DATA_IO_PD(51), PORT_DATA_IO_PD(52), - PORT_DATA_O(53), - PORT_DATA_IO_PD(54), - PORT_DATA_I_PU_PD(55), - PORT_DATA_IO_PU_PD(56), - PORT_DATA_I_PU_PD(57), - PORT_DATA_IO_PU_PD(58), - PORT_DATA_O(59), PORT_DATA_O(60), PORT_DATA_O(61), PORT_DATA_O(62), - PORT_DATA_O(63), - PORT_DATA_I_PU(64), - PORT_DATA_O(65), PORT_DATA_O(66), PORT_DATA_O(67), PORT_DATA_O(68), - PORT_DATA_IO_PD(69), PORT_DATA_IO_PD(70), - PORT_DATA_I_PD(71), PORT_DATA_I_PD(72), PORT_DATA_I_PD(73), - PORT_DATA_I_PD(74), - PORT_DATA_IO_PU_PD(75), PORT_DATA_IO_PU_PD(76), - PORT_DATA_IO_PD(77), PORT_DATA_IO_PD(78), - PORT_DATA_O(79), - PORT_DATA_IO_PD(80), PORT_DATA_IO_PD(81), PORT_DATA_IO_PD(82), - PORT_DATA_IO_PU_PD(83), PORT_DATA_IO_PU_PD(84), - PORT_DATA_IO_PU_PD(85), PORT_DATA_IO_PU_PD(86), - PORT_DATA_I_PD(87), - PORT_DATA_IO_PU_PD(88), - PORT_DATA_I_PU_PD(89), PORT_DATA_I_PU_PD(90), - - /* 49-3 (GPIO) */ - PORT_DATA_O(91), PORT_DATA_O(92), PORT_DATA_O(93), PORT_DATA_O(94), - PORT_DATA_I_PU_PD(95), - PORT_DATA_IO_PU_PD(96), PORT_DATA_IO_PU_PD(97), PORT_DATA_IO_PU_PD(98), - PORT_DATA_IO_PU_PD(99), PORT_DATA_IO_PU_PD(100), - PORT_DATA_IO(101), PORT_DATA_IO(102), PORT_DATA_IO(103), - PORT_DATA_IO_PD(104), PORT_DATA_IO_PD(105), PORT_DATA_IO_PD(106), - PORT_DATA_IO_PD(107), - PORT_DATA_IO_PU_PD(108), PORT_DATA_IO_PU_PD(109), - PORT_DATA_IO_PU_PD(110), PORT_DATA_IO_PU_PD(111), - PORT_DATA_IO_PU_PD(112), PORT_DATA_IO_PU_PD(113), - PORT_DATA_IO_PU_PD(114), - PORT_DATA_IO_PU(115), PORT_DATA_IO_PU(116), PORT_DATA_IO_PU(117), - PORT_DATA_IO_PU(118), PORT_DATA_IO_PU(119), PORT_DATA_IO_PU(120), - PORT_DATA_IO_PU(121), PORT_DATA_IO_PU(122), PORT_DATA_IO_PU(123), - PORT_DATA_IO_PU(124), PORT_DATA_IO_PU(125), PORT_DATA_IO_PU(126), - PORT_DATA_IO_PU(127), PORT_DATA_IO_PU(128), PORT_DATA_IO_PU(129), - PORT_DATA_IO_PU(130), - PORT_DATA_O(131), PORT_DATA_O(132), PORT_DATA_O(133), - PORT_DATA_IO_PU(134), - PORT_DATA_O(135), PORT_DATA_O(136), - PORT_DATA_I_PU_PD(137), - PORT_DATA_IO(138), - PORT_DATA_IO_PU_PD(139), - PORT_DATA_IO(140), PORT_DATA_IO(141), - PORT_DATA_I_PU(142), - PORT_DATA_O(143), PORT_DATA_O(144), - PORT_DATA_I_PU(145), - - /* 49-4 (GPIO) */ - PORT_DATA_O(146), - PORT_DATA_I_PU_PD(147), - PORT_DATA_I_PD(148), PORT_DATA_I_PD(149), - PORT_DATA_IO_PD(150), PORT_DATA_IO_PD(151), PORT_DATA_IO_PD(152), - PORT_DATA_IO_PD(153), PORT_DATA_IO_PD(154), PORT_DATA_IO_PD(155), - PORT_DATA_IO_PD(156), PORT_DATA_IO_PD(157), PORT_DATA_IO_PD(158), - PORT_DATA_IO_PD(159), PORT_DATA_IO_PD(160), PORT_DATA_IO_PD(161), - PORT_DATA_IO_PD(162), PORT_DATA_IO_PD(163), PORT_DATA_IO_PD(164), - PORT_DATA_IO_PD(165), PORT_DATA_IO_PD(166), - PORT_DATA_IO_PU_PD(167), - PORT_DATA_O(168), - PORT_DATA_I_PD(169), PORT_DATA_I_PD(170), - PORT_DATA_O(171), - PORT_DATA_IO_PD(172), PORT_DATA_IO_PD(173), - PORT_DATA_O(174), - PORT_DATA_IO_PD(175), PORT_DATA_IO_PD(176), PORT_DATA_IO_PD(177), - PORT_DATA_IO_PD(178), PORT_DATA_IO_PD(179), PORT_DATA_IO_PD(180), - PORT_DATA_IO_PD(181), PORT_DATA_IO_PD(182), PORT_DATA_IO_PD(183), - PORT_DATA_IO_PD(184), PORT_DATA_IO_PD(185), PORT_DATA_IO_PD(186), - PORT_DATA_IO_PD(187), PORT_DATA_IO_PD(188), PORT_DATA_IO_PD(189), - PORT_DATA_IO_PD(190), PORT_DATA_IO_PD(191), PORT_DATA_IO_PD(192), - PORT_DATA_IO_PD(193), PORT_DATA_IO_PD(194), PORT_DATA_IO_PD(195), - PORT_DATA_IO_PD(196), PORT_DATA_IO_PD(197), PORT_DATA_IO_PD(198), - PORT_DATA_O(199), - PORT_DATA_IO_PD(200), - - /* 49-5 (GPIO) */ - PORT_DATA_O(201), - PORT_DATA_IO_PD(202), PORT_DATA_IO_PD(203), - PORT_DATA_I(204), - PORT_DATA_O(205), - PORT_DATA_IO_PD(206), PORT_DATA_IO_PD(207), PORT_DATA_IO_PD(208), - PORT_DATA_IO_PD(209), PORT_DATA_IO_PD(210), PORT_DATA_IO_PD(211), - PORT_DATA_IO_PD(212), PORT_DATA_IO_PD(213), PORT_DATA_IO_PD(214), - PORT_DATA_IO_PD(215), PORT_DATA_IO_PD(216), - PORT_DATA_O(217), - PORT_DATA_I_PU_PD(218), PORT_DATA_I_PU_PD(219), - PORT_DATA_O(220), PORT_DATA_O(221), PORT_DATA_O(222), - PORT_DATA_I_PD(223), - PORT_DATA_I_PU_PD(224), - PORT_DATA_O(225), - PORT_DATA_IO_PD(226), - PORT_DATA_IO_PU_PD(227), - PORT_DATA_I_PD(228), - PORT_DATA_IO_PD(229), PORT_DATA_IO_PD(230), - PORT_DATA_I_PU_PD(231), PORT_DATA_I_PU_PD(232), - PORT_DATA_IO_PU_PD(233), PORT_DATA_IO_PU_PD(234), - PORT_DATA_I_PU_PD(235), - PORT_DATA_O(236), - PORT_DATA_I_PD(237), - PORT_DATA_IO_PU_PD(238), PORT_DATA_IO_PU_PD(239), - PORT_DATA_IO_PD(240), PORT_DATA_IO_PD(241), - PORT_DATA_IO_PD(242), PORT_DATA_IO_PD(243), - PORT_DATA_O(244), - PORT_DATA_IO_PU_PD(245), - PORT_DATA_O(246), - PORT_DATA_I_PD(247), - PORT_DATA_IO_PU_PD(248), - PORT_DATA_I_PU_PD(249), - PORT_DATA_IO_PD(250), PORT_DATA_IO_PD(251), - PORT_DATA_IO_PU_PD(252), PORT_DATA_IO_PU_PD(253), - PORT_DATA_IO_PU_PD(254), PORT_DATA_IO_PU_PD(255), - PORT_DATA_IO_PU_PD(256), - - /* 49-6 (GPIO) */ - PORT_DATA_IO_PU_PD(257), PORT_DATA_IO_PU_PD(258), - PORT_DATA_IO_PD(259), - PORT_DATA_IO_PU(260), PORT_DATA_IO_PU(261), PORT_DATA_IO_PU(262), - PORT_DATA_IO_PU(263), PORT_DATA_IO_PU(264), - PORT_DATA_O(265), - PORT_DATA_IO_PU(266), PORT_DATA_IO_PU(267), PORT_DATA_IO_PU(268), - PORT_DATA_IO_PU(269), PORT_DATA_IO_PU(270), - PORT_DATA_O(271), - PORT_DATA_I_PD(272), - - /* Special Pull-up / Pull-down Functions */ - PINMUX_DATA(PORT48_KEYIN0_PU_MARK, MSELBCR_MSEL2_1, - PORT48_FN2, PORT48_IN_PU), - PINMUX_DATA(PORT49_KEYIN1_PU_MARK, MSELBCR_MSEL2_1, - PORT49_FN2, PORT49_IN_PU), - PINMUX_DATA(PORT50_KEYIN2_PU_MARK, MSELBCR_MSEL2_1, - PORT50_FN2, PORT50_IN_PU), - PINMUX_DATA(PORT55_KEYIN3_PU_MARK, MSELBCR_MSEL2_1, - PORT55_FN2, PORT55_IN_PU), - PINMUX_DATA(PORT56_KEYIN4_PU_MARK, MSELBCR_MSEL2_1, - PORT56_FN2, PORT56_IN_PU), - PINMUX_DATA(PORT57_KEYIN5_PU_MARK, MSELBCR_MSEL2_1, - PORT57_FN2, PORT57_IN_PU), - PINMUX_DATA(PORT58_KEYIN6_PU_MARK, MSELBCR_MSEL2_1, - PORT58_FN2, PORT58_IN_PU), - - /* 49-1 (FN) */ - PINMUX_DATA(VBUS0_MARK, PORT0_FN1), - PINMUX_DATA(CPORT0_MARK, PORT1_FN1), - PINMUX_DATA(CPORT1_MARK, PORT2_FN1), - PINMUX_DATA(CPORT2_MARK, PORT3_FN1), - PINMUX_DATA(CPORT3_MARK, PORT4_FN1), - PINMUX_DATA(CPORT4_MARK, PORT5_FN1), - PINMUX_DATA(CPORT5_MARK, PORT6_FN1), - PINMUX_DATA(CPORT6_MARK, PORT7_FN1), - PINMUX_DATA(CPORT7_MARK, PORT8_FN1), - PINMUX_DATA(CPORT8_MARK, PORT9_FN1), - PINMUX_DATA(CPORT9_MARK, PORT10_FN1), - PINMUX_DATA(CPORT10_MARK, PORT11_FN1), - PINMUX_DATA(CPORT11_MARK, PORT12_FN1), - PINMUX_DATA(SIN2_MARK, PORT12_FN2), - PINMUX_DATA(CPORT12_MARK, PORT13_FN1), - PINMUX_DATA(XCTS2_MARK, PORT13_FN2), - PINMUX_DATA(CPORT13_MARK, PORT14_FN1), - PINMUX_DATA(RFSPO4_MARK, PORT14_FN2), - PINMUX_DATA(CPORT14_MARK, PORT15_FN1), - PINMUX_DATA(RFSPO5_MARK, PORT15_FN2), - PINMUX_DATA(CPORT15_MARK, PORT16_FN1), - PINMUX_DATA(CPORT16_MARK, PORT17_FN1), - PINMUX_DATA(CPORT17_MARK, PORT18_FN1), - PINMUX_DATA(SOUT2_MARK, PORT18_FN2), - PINMUX_DATA(CPORT18_MARK, PORT19_FN1), - PINMUX_DATA(XRTS2_MARK, PORT19_FN1), - PINMUX_DATA(CPORT19_MARK, PORT20_FN1), - PINMUX_DATA(CPORT20_MARK, PORT21_FN1), - PINMUX_DATA(RFSPO6_MARK, PORT21_FN2), - PINMUX_DATA(CPORT21_MARK, PORT22_FN1), - PINMUX_DATA(STATUS0_MARK, PORT22_FN2), - PINMUX_DATA(CPORT22_MARK, PORT23_FN1), - PINMUX_DATA(STATUS1_MARK, PORT23_FN2), - PINMUX_DATA(CPORT23_MARK, PORT24_FN1), - PINMUX_DATA(STATUS2_MARK, PORT24_FN2), - PINMUX_DATA(RFSPO7_MARK, PORT24_FN3), - PINMUX_DATA(MPORT0_MARK, PORT25_FN1), - PINMUX_DATA(MPORT1_MARK, PORT26_FN1), - PINMUX_DATA(B_SYNLD1_MARK, PORT27_FN1), - PINMUX_DATA(B_SYNLD2_MARK, PORT28_FN1), - PINMUX_DATA(XMAINPS_MARK, PORT29_FN1), - PINMUX_DATA(XDIVPS_MARK, PORT30_FN1), - PINMUX_DATA(XIDRST_MARK, PORT31_FN1), - PINMUX_DATA(IDCLK_MARK, PORT32_FN1), - PINMUX_DATA(IDIO_MARK, PORT33_FN1), - PINMUX_DATA(SOUT1_MARK, PORT34_FN1), - PINMUX_DATA(SCIFA4_TXD_MARK, PORT34_FN2), - PINMUX_DATA(M02_BERDAT_MARK, PORT34_FN3), - PINMUX_DATA(SIN1_MARK, PORT35_FN1), - PINMUX_DATA(SCIFA4_RXD_MARK, PORT35_FN2), - PINMUX_DATA(XWUP_MARK, PORT35_FN3), - PINMUX_DATA(XRTS1_MARK, PORT36_FN1), - PINMUX_DATA(SCIFA4_RTS_MARK, PORT36_FN2), - PINMUX_DATA(M03_BERCLK_MARK, PORT36_FN3), - PINMUX_DATA(XCTS1_MARK, PORT37_FN1), - PINMUX_DATA(SCIFA4_CTS_MARK, PORT37_FN2), - - /* 49-2 (FN) */ - PINMUX_DATA(HSU_IQ_AGC6_MARK, PORT38_FN1), - PINMUX_DATA(MFG2_IN2_MARK, PORT38_FN2), - PINMUX_DATA(MSIOF2_MCK0_MARK, PORT38_FN3), - PINMUX_DATA(HSU_IQ_AGC5_MARK, PORT39_FN1), - PINMUX_DATA(MFG2_IN1_MARK, PORT39_FN2), - PINMUX_DATA(MSIOF2_MCK1_MARK, PORT39_FN3), - PINMUX_DATA(HSU_IQ_AGC4_MARK, PORT40_FN1), - PINMUX_DATA(MSIOF2_RSYNC_MARK, PORT40_FN3), - PINMUX_DATA(HSU_IQ_AGC3_MARK, PORT41_FN1), - PINMUX_DATA(MFG2_OUT1_MARK, PORT41_FN2), - PINMUX_DATA(MSIOF2_RSCK_MARK, PORT41_FN3), - PINMUX_DATA(HSU_IQ_AGC2_MARK, PORT42_FN1), - PINMUX_DATA(PORT42_KEYOUT0_MARK, MSELBCR_MSEL2_1, PORT42_FN2), - PINMUX_DATA(HSU_IQ_AGC1_MARK, PORT43_FN1), - PINMUX_DATA(PORT43_KEYOUT1_MARK, MSELBCR_MSEL2_1, PORT43_FN2), - PINMUX_DATA(HSU_IQ_AGC0_MARK, PORT44_FN1), - PINMUX_DATA(PORT44_KEYOUT2_MARK, MSELBCR_MSEL2_1, PORT44_FN2), - PINMUX_DATA(HSU_IQ_AGC_ST_MARK, PORT45_FN1), - PINMUX_DATA(PORT45_KEYOUT3_MARK, MSELBCR_MSEL2_1, PORT45_FN2), - PINMUX_DATA(HSU_IQ_PDO_MARK, PORT46_FN1), - PINMUX_DATA(PORT46_KEYOUT4_MARK, MSELBCR_MSEL2_1, PORT46_FN2), - PINMUX_DATA(HSU_IQ_PYO_MARK, PORT47_FN1), - PINMUX_DATA(PORT47_KEYOUT5_MARK, MSELBCR_MSEL2_1, PORT47_FN2), - PINMUX_DATA(HSU_EN_TXMUX_G3MO_MARK, PORT48_FN1), - PINMUX_DATA(PORT48_KEYIN0_MARK, MSELBCR_MSEL2_1, PORT48_FN2), - PINMUX_DATA(HSU_I_TXMUX_G3MO_MARK, PORT49_FN1), - PINMUX_DATA(PORT49_KEYIN1_MARK, MSELBCR_MSEL2_1, PORT49_FN2), - PINMUX_DATA(HSU_Q_TXMUX_G3MO_MARK, PORT50_FN1), - PINMUX_DATA(PORT50_KEYIN2_MARK, MSELBCR_MSEL2_1, PORT50_FN2), - PINMUX_DATA(HSU_SYO_MARK, PORT51_FN1), - PINMUX_DATA(PORT51_MSIOF2_TSYNC_MARK, PORT51_FN2), - PINMUX_DATA(HSU_SDO_MARK, PORT52_FN1), - PINMUX_DATA(PORT52_MSIOF2_TSCK_MARK, PORT52_FN2), - PINMUX_DATA(HSU_TGTTI_G3MO_MARK, PORT53_FN1), - PINMUX_DATA(PORT53_MSIOF2_TXD_MARK, PORT53_FN2), - PINMUX_DATA(B_TIME_STAMP_MARK, PORT54_FN1), - PINMUX_DATA(PORT54_MSIOF2_RXD_MARK, PORT54_FN2), - PINMUX_DATA(HSU_SDI_MARK, PORT55_FN1), - PINMUX_DATA(PORT55_KEYIN3_MARK, MSELBCR_MSEL2_1, PORT55_FN2), - PINMUX_DATA(HSU_SCO_MARK, PORT56_FN1), - PINMUX_DATA(PORT56_KEYIN4_MARK, MSELBCR_MSEL2_1, PORT56_FN2), - PINMUX_DATA(HSU_DREQ_MARK, PORT57_FN1), - PINMUX_DATA(PORT57_KEYIN5_MARK, MSELBCR_MSEL2_1, PORT57_FN2), - PINMUX_DATA(HSU_DACK_MARK, PORT58_FN1), - PINMUX_DATA(PORT58_KEYIN6_MARK, MSELBCR_MSEL2_1, PORT58_FN2), - PINMUX_DATA(HSU_CLK61M_MARK, PORT59_FN1), - PINMUX_DATA(PORT59_MSIOF2_SS1_MARK, PORT59_FN2), - PINMUX_DATA(HSU_XRST_MARK, PORT60_FN1), - PINMUX_DATA(PORT60_MSIOF2_SS2_MARK, PORT60_FN2), - PINMUX_DATA(PCMCLKO_MARK, PORT61_FN1), - PINMUX_DATA(SYNC8KO_MARK, PORT62_FN1), - PINMUX_DATA(DNPCM_A_MARK, PORT63_FN1), - PINMUX_DATA(UPPCM_A_MARK, PORT64_FN1), - PINMUX_DATA(XTALB1L_MARK, PORT65_FN1), - PINMUX_DATA(GPS_AGC1_MARK, PORT66_FN1), - PINMUX_DATA(SCIFA0_RTS_MARK, PORT66_FN2), - PINMUX_DATA(GPS_AGC2_MARK, PORT67_FN1), - PINMUX_DATA(SCIFA0_SCK_MARK, PORT67_FN2), - PINMUX_DATA(GPS_AGC3_MARK, PORT68_FN1), - PINMUX_DATA(SCIFA0_TXD_MARK, PORT68_FN2), - PINMUX_DATA(GPS_AGC4_MARK, PORT69_FN1), - PINMUX_DATA(SCIFA0_RXD_MARK, PORT69_FN2), - PINMUX_DATA(GPS_PWRD_MARK, PORT70_FN1), - PINMUX_DATA(SCIFA0_CTS_MARK, PORT70_FN2), - PINMUX_DATA(GPS_IM_MARK, PORT71_FN1), - PINMUX_DATA(GPS_IS_MARK, PORT72_FN1), - PINMUX_DATA(GPS_QM_MARK, PORT73_FN1), - PINMUX_DATA(GPS_QS_MARK, PORT74_FN1), - PINMUX_DATA(SIUBOMC_MARK, PORT75_FN1), - PINMUX_DATA(TPU2TO0_MARK, PORT75_FN3), - PINMUX_DATA(SIUCKB_MARK, PORT76_FN1), - PINMUX_DATA(TPU2TO1_MARK, PORT76_FN3), - PINMUX_DATA(SIUBOLR_MARK, PORT77_FN1), - PINMUX_DATA(BBIF2_TSYNC_MARK, PORT77_FN2), - PINMUX_DATA(TPU2TO2_MARK, PORT77_FN3), - PINMUX_DATA(SIUBOBT_MARK, PORT78_FN1), - PINMUX_DATA(BBIF2_TSCK_MARK, PORT78_FN2), - PINMUX_DATA(TPU2TO3_MARK, PORT78_FN3), - PINMUX_DATA(SIUBOSLD_MARK, PORT79_FN1), - PINMUX_DATA(BBIF2_TXD_MARK, PORT79_FN2), - PINMUX_DATA(TPU3TO0_MARK, PORT79_FN3), - PINMUX_DATA(SIUBILR_MARK, PORT80_FN1), - PINMUX_DATA(TPU3TO1_MARK, PORT80_FN3), - PINMUX_DATA(SIUBIBT_MARK, PORT81_FN1), - PINMUX_DATA(TPU3TO2_MARK, PORT81_FN3), - PINMUX_DATA(SIUBISLD_MARK, PORT82_FN1), - PINMUX_DATA(TPU3TO3_MARK, PORT82_FN3), - PINMUX_DATA(NMI_MARK, PORT83_FN1), - PINMUX_DATA(TPU4TO0_MARK, PORT83_FN3), - PINMUX_DATA(DNPCM_M_MARK, PORT84_FN1), - PINMUX_DATA(TPU4TO1_MARK, PORT84_FN3), - PINMUX_DATA(TPU4TO2_MARK, PORT85_FN3), - PINMUX_DATA(TPU4TO3_MARK, PORT86_FN3), - PINMUX_DATA(IRQ_TMPB_MARK, PORT87_FN1), - PINMUX_DATA(PWEN_MARK, PORT88_FN1), - PINMUX_DATA(MFG1_OUT1_MARK, PORT88_FN2), - PINMUX_DATA(OVCN_MARK, PORT89_FN1), - PINMUX_DATA(MFG1_IN1_MARK, PORT89_FN2), - PINMUX_DATA(OVCN2_MARK, PORT90_FN1), - PINMUX_DATA(MFG1_IN2_MARK, PORT90_FN2), - - /* 49-3 (FN) */ - PINMUX_DATA(RFSPO1_MARK, PORT91_FN1), - PINMUX_DATA(RFSPO2_MARK, PORT92_FN1), - PINMUX_DATA(RFSPO3_MARK, PORT93_FN1), - PINMUX_DATA(PORT93_VIO_CKO2_MARK, PORT93_FN2), - PINMUX_DATA(USBTERM_MARK, PORT94_FN1), - PINMUX_DATA(EXTLP_MARK, PORT94_FN2), - PINMUX_DATA(IDIN_MARK, PORT95_FN1), - PINMUX_DATA(SCIFA5_CTS_MARK, PORT96_FN1), - PINMUX_DATA(MFG0_IN1_MARK, PORT96_FN2), - PINMUX_DATA(SCIFA5_RTS_MARK, PORT97_FN1), - PINMUX_DATA(MFG0_IN2_MARK, PORT97_FN2), - PINMUX_DATA(SCIFA5_RXD_MARK, PORT98_FN1), - PINMUX_DATA(SCIFA5_TXD_MARK, PORT99_FN1), - PINMUX_DATA(SCIFA5_SCK_MARK, PORT100_FN1), - PINMUX_DATA(MFG0_OUT1_MARK, PORT100_FN2), - PINMUX_DATA(A0_EA0_MARK, PORT101_FN1), - PINMUX_DATA(BS_MARK, PORT101_FN2), - PINMUX_DATA(A14_EA14_MARK, PORT102_FN1), - PINMUX_DATA(PORT102_KEYOUT0_MARK, MSELBCR_MSEL2_0, PORT102_FN2), - PINMUX_DATA(A15_EA15_MARK, PORT103_FN1), - PINMUX_DATA(PORT103_KEYOUT1_MARK, MSELBCR_MSEL2_0, PORT103_FN2), - PINMUX_DATA(DV_CLKOL_MARK, PORT103_FN3), - PINMUX_DATA(A16_EA16_MARK, PORT104_FN1), - PINMUX_DATA(PORT104_KEYOUT2_MARK, MSELBCR_MSEL2_0, PORT104_FN2), - PINMUX_DATA(DV_VSYNCL_MARK, PORT104_FN3), - PINMUX_DATA(MSIOF0_SS1_MARK, PORT104_FN4), - PINMUX_DATA(A17_EA17_MARK, PORT105_FN1), - PINMUX_DATA(PORT105_KEYOUT3_MARK, MSELBCR_MSEL2_0, PORT105_FN2), - PINMUX_DATA(DV_HSYNCL_MARK, PORT105_FN3), - PINMUX_DATA(MSIOF0_TSYNC_MARK, PORT105_FN4), - PINMUX_DATA(A18_EA18_MARK, PORT106_FN1), - PINMUX_DATA(PORT106_KEYOUT4_MARK, MSELBCR_MSEL2_0, PORT106_FN2), - PINMUX_DATA(DV_DL0_MARK, PORT106_FN3), - PINMUX_DATA(MSIOF0_TSCK_MARK, PORT106_FN4), - PINMUX_DATA(A19_EA19_MARK, PORT107_FN1), - PINMUX_DATA(PORT107_KEYOUT5_MARK, MSELBCR_MSEL2_0, PORT107_FN2), - PINMUX_DATA(DV_DL1_MARK, PORT107_FN3), - PINMUX_DATA(MSIOF0_TXD_MARK, PORT107_FN4), - PINMUX_DATA(A20_EA20_MARK, PORT108_FN1), - PINMUX_DATA(PORT108_KEYIN0_MARK, MSELBCR_MSEL2_0, PORT108_FN2), - PINMUX_DATA(DV_DL2_MARK, PORT108_FN3), - PINMUX_DATA(MSIOF0_RSCK_MARK, PORT108_FN4), - PINMUX_DATA(A21_EA21_MARK, PORT109_FN1), - PINMUX_DATA(PORT109_KEYIN1_MARK, MSELBCR_MSEL2_0, PORT109_FN2), - PINMUX_DATA(DV_DL3_MARK, PORT109_FN3), - PINMUX_DATA(MSIOF0_RSYNC_MARK, PORT109_FN4), - PINMUX_DATA(A22_EA22_MARK, PORT110_FN1), - PINMUX_DATA(PORT110_KEYIN2_MARK, MSELBCR_MSEL2_0, PORT110_FN2), - PINMUX_DATA(DV_DL4_MARK, PORT110_FN3), - PINMUX_DATA(MSIOF0_MCK0_MARK, PORT110_FN4), - PINMUX_DATA(A23_EA23_MARK, PORT111_FN1), - PINMUX_DATA(PORT111_KEYIN3_MARK, MSELBCR_MSEL2_0, PORT111_FN2), - PINMUX_DATA(DV_DL5_MARK, PORT111_FN3), - PINMUX_DATA(MSIOF0_MCK1_MARK, PORT111_FN4), - PINMUX_DATA(A24_EA24_MARK, PORT112_FN1), - PINMUX_DATA(PORT112_KEYIN4_MARK, MSELBCR_MSEL2_0, PORT112_FN2), - PINMUX_DATA(DV_DL6_MARK, PORT112_FN3), - PINMUX_DATA(MSIOF0_RXD_MARK, PORT112_FN4), - PINMUX_DATA(A25_EA25_MARK, PORT113_FN1), - PINMUX_DATA(PORT113_KEYIN5_MARK, MSELBCR_MSEL2_0, PORT113_FN2), - PINMUX_DATA(DV_DL7_MARK, PORT113_FN3), - PINMUX_DATA(MSIOF0_SS2_MARK, PORT113_FN4), - PINMUX_DATA(A26_MARK, PORT114_FN1), - PINMUX_DATA(PORT113_KEYIN6_MARK, MSELBCR_MSEL2_0, PORT114_FN2), - PINMUX_DATA(DV_CLKIL_MARK, PORT114_FN3), - PINMUX_DATA(D0_ED0_NAF0_MARK, PORT115_FN1), - PINMUX_DATA(D1_ED1_NAF1_MARK, PORT116_FN1), - PINMUX_DATA(D2_ED2_NAF2_MARK, PORT117_FN1), - PINMUX_DATA(D3_ED3_NAF3_MARK, PORT118_FN1), - PINMUX_DATA(D4_ED4_NAF4_MARK, PORT119_FN1), - PINMUX_DATA(D5_ED5_NAF5_MARK, PORT120_FN1), - PINMUX_DATA(D6_ED6_NAF6_MARK, PORT121_FN1), - PINMUX_DATA(D7_ED7_NAF7_MARK, PORT122_FN1), - PINMUX_DATA(D8_ED8_NAF8_MARK, PORT123_FN1), - PINMUX_DATA(D9_ED9_NAF9_MARK, PORT124_FN1), - PINMUX_DATA(D10_ED10_NAF10_MARK, PORT125_FN1), - PINMUX_DATA(D11_ED11_NAF11_MARK, PORT126_FN1), - PINMUX_DATA(D12_ED12_NAF12_MARK, PORT127_FN1), - PINMUX_DATA(D13_ED13_NAF13_MARK, PORT128_FN1), - PINMUX_DATA(D14_ED14_NAF14_MARK, PORT129_FN1), - PINMUX_DATA(D15_ED15_NAF15_MARK, PORT130_FN1), - PINMUX_DATA(CS4_MARK, PORT131_FN1), - PINMUX_DATA(CS5A_MARK, PORT132_FN1), - PINMUX_DATA(CS5B_MARK, PORT133_FN1), - PINMUX_DATA(FCE1_MARK, PORT133_FN2), - PINMUX_DATA(CS6B_MARK, PORT134_FN1), - PINMUX_DATA(XCS2_MARK, PORT134_FN2), - PINMUX_DATA(FCE0_MARK, PORT135_FN1), - PINMUX_DATA(CS6A_MARK, PORT136_FN1), - PINMUX_DATA(DACK0_MARK, PORT136_FN2), - PINMUX_DATA(WAIT_MARK, PORT137_FN1), - PINMUX_DATA(DREQ0_MARK, PORT137_FN2), - PINMUX_DATA(RD_XRD_MARK, PORT138_FN1), - PINMUX_DATA(A27_MARK, PORT139_FN1), - PINMUX_DATA(RDWR_XWE_MARK, PORT139_FN2), - PINMUX_DATA(WE0_XWR0_FWE_MARK, PORT140_FN1), - PINMUX_DATA(WE1_XWR1_MARK, PORT141_FN1), - PINMUX_DATA(FRB_MARK, PORT142_FN1), - PINMUX_DATA(CKO_MARK, PORT143_FN1), - PINMUX_DATA(NBRSTOUT_MARK, PORT144_FN1), - PINMUX_DATA(NBRST_MARK, PORT145_FN1), - - /* 49-4 (FN) */ - PINMUX_DATA(RFSPO0_MARK, PORT146_FN1), - PINMUX_DATA(PORT146_VIO_CKO2_MARK, PORT146_FN2), - PINMUX_DATA(TSTMD_MARK, PORT147_FN1), - PINMUX_DATA(VIO_VD_MARK, PORT148_FN1), - PINMUX_DATA(VIO_HD_MARK, PORT149_FN1), - PINMUX_DATA(VIO_D0_MARK, PORT150_FN1), - PINMUX_DATA(VIO_D1_MARK, PORT151_FN1), - PINMUX_DATA(VIO_D2_MARK, PORT152_FN1), - PINMUX_DATA(VIO_D3_MARK, PORT153_FN1), - PINMUX_DATA(VIO_D4_MARK, PORT154_FN1), - PINMUX_DATA(VIO_D5_MARK, PORT155_FN1), - PINMUX_DATA(VIO_D6_MARK, PORT156_FN1), - PINMUX_DATA(VIO_D7_MARK, PORT157_FN1), - PINMUX_DATA(VIO_D8_MARK, PORT158_FN1), - PINMUX_DATA(VIO_D9_MARK, PORT159_FN1), - PINMUX_DATA(VIO_D10_MARK, PORT160_FN1), - PINMUX_DATA(VIO_D11_MARK, PORT161_FN1), - PINMUX_DATA(VIO_D12_MARK, PORT162_FN1), - PINMUX_DATA(VIO_D13_MARK, PORT163_FN1), - PINMUX_DATA(VIO_D14_MARK, PORT164_FN1), - PINMUX_DATA(VIO_D15_MARK, PORT165_FN1), - PINMUX_DATA(VIO_CLK_MARK, PORT166_FN1), - PINMUX_DATA(VIO_FIELD_MARK, PORT167_FN1), - PINMUX_DATA(VIO_CKO_MARK, PORT168_FN1), - PINMUX_DATA(MFG3_IN1_MARK, PORT169_FN2), - PINMUX_DATA(MFG3_IN2_MARK, PORT170_FN2), - PINMUX_DATA(M9_SLCD_A01_MARK, PORT171_FN1), - PINMUX_DATA(MFG3_OUT1_MARK, PORT171_FN2), - PINMUX_DATA(TPU0TO0_MARK, PORT171_FN3), - PINMUX_DATA(M10_SLCD_CK1_MARK, PORT172_FN1), - PINMUX_DATA(MFG4_IN1_MARK, PORT172_FN2), - PINMUX_DATA(TPU0TO1_MARK, PORT172_FN3), - PINMUX_DATA(M11_SLCD_SO1_MARK, PORT173_FN1), - PINMUX_DATA(MFG4_IN2_MARK, PORT173_FN2), - PINMUX_DATA(TPU0TO2_MARK, PORT173_FN3), - PINMUX_DATA(M12_SLCD_CE1_MARK, PORT174_FN1), - PINMUX_DATA(MFG4_OUT1_MARK, PORT174_FN2), - PINMUX_DATA(TPU0TO3_MARK, PORT174_FN3), - PINMUX_DATA(LCDD0_MARK, PORT175_FN1), - PINMUX_DATA(PORT175_KEYOUT0_MARK, PORT175_FN2), - PINMUX_DATA(DV_D0_MARK, PORT175_FN3), - PINMUX_DATA(SIUCKA_MARK, PORT175_FN4), - PINMUX_DATA(MFG0_OUT2_MARK, PORT175_FN5), - PINMUX_DATA(LCDD1_MARK, PORT176_FN1), - PINMUX_DATA(PORT176_KEYOUT1_MARK, PORT176_FN2), - PINMUX_DATA(DV_D1_MARK, PORT176_FN3), - PINMUX_DATA(SIUAOLR_MARK, PORT176_FN4), - PINMUX_DATA(BBIF2_TSYNC1_MARK, PORT176_FN5), - PINMUX_DATA(LCDD2_MARK, PORT177_FN1), - PINMUX_DATA(PORT177_KEYOUT2_MARK, PORT177_FN2), - PINMUX_DATA(DV_D2_MARK, PORT177_FN3), - PINMUX_DATA(SIUAOBT_MARK, PORT177_FN4), - PINMUX_DATA(BBIF2_TSCK1_MARK, PORT177_FN5), - PINMUX_DATA(LCDD3_MARK, PORT178_FN1), - PINMUX_DATA(PORT178_KEYOUT3_MARK, PORT178_FN2), - PINMUX_DATA(DV_D3_MARK, PORT178_FN3), - PINMUX_DATA(SIUAOSLD_MARK, PORT178_FN4), - PINMUX_DATA(BBIF2_TXD1_MARK, PORT178_FN5), - PINMUX_DATA(LCDD4_MARK, PORT179_FN1), - PINMUX_DATA(PORT179_KEYOUT4_MARK, PORT179_FN2), - PINMUX_DATA(DV_D4_MARK, PORT179_FN3), - PINMUX_DATA(SIUAISPD_MARK, PORT179_FN4), - PINMUX_DATA(MFG1_OUT2_MARK, PORT179_FN5), - PINMUX_DATA(LCDD5_MARK, PORT180_FN1), - PINMUX_DATA(PORT180_KEYOUT5_MARK, PORT180_FN2), - PINMUX_DATA(DV_D5_MARK, PORT180_FN3), - PINMUX_DATA(SIUAILR_MARK, PORT180_FN4), - PINMUX_DATA(MFG2_OUT2_MARK, PORT180_FN5), - PINMUX_DATA(LCDD6_MARK, PORT181_FN1), - PINMUX_DATA(DV_D6_MARK, PORT181_FN3), - PINMUX_DATA(SIUAIBT_MARK, PORT181_FN4), - PINMUX_DATA(MFG3_OUT2_MARK, PORT181_FN5), - PINMUX_DATA(XWR2_MARK, PORT181_FN7), - PINMUX_DATA(LCDD7_MARK, PORT182_FN1), - PINMUX_DATA(DV_D7_MARK, PORT182_FN3), - PINMUX_DATA(SIUAISLD_MARK, PORT182_FN4), - PINMUX_DATA(MFG4_OUT2_MARK, PORT182_FN5), - PINMUX_DATA(XWR3_MARK, PORT182_FN7), - PINMUX_DATA(LCDD8_MARK, PORT183_FN1), - PINMUX_DATA(DV_D8_MARK, PORT183_FN3), - PINMUX_DATA(D16_MARK, PORT183_FN6), - PINMUX_DATA(ED16_MARK, PORT183_FN7), - PINMUX_DATA(LCDD9_MARK, PORT184_FN1), - PINMUX_DATA(DV_D9_MARK, PORT184_FN3), - PINMUX_DATA(D17_MARK, PORT184_FN6), - PINMUX_DATA(ED17_MARK, PORT184_FN7), - PINMUX_DATA(LCDD10_MARK, PORT185_FN1), - PINMUX_DATA(DV_D10_MARK, PORT185_FN3), - PINMUX_DATA(D18_MARK, PORT185_FN6), - PINMUX_DATA(ED18_MARK, PORT185_FN7), - PINMUX_DATA(LCDD11_MARK, PORT186_FN1), - PINMUX_DATA(DV_D11_MARK, PORT186_FN3), - PINMUX_DATA(D19_MARK, PORT186_FN6), - PINMUX_DATA(ED19_MARK, PORT186_FN7), - PINMUX_DATA(LCDD12_MARK, PORT187_FN1), - PINMUX_DATA(DV_D12_MARK, PORT187_FN3), - PINMUX_DATA(D20_MARK, PORT187_FN6), - PINMUX_DATA(ED20_MARK, PORT187_FN7), - PINMUX_DATA(LCDD13_MARK, PORT188_FN1), - PINMUX_DATA(DV_D13_MARK, PORT188_FN3), - PINMUX_DATA(D21_MARK, PORT188_FN6), - PINMUX_DATA(ED21_MARK, PORT188_FN7), - PINMUX_DATA(LCDD14_MARK, PORT189_FN1), - PINMUX_DATA(DV_D14_MARK, PORT189_FN3), - PINMUX_DATA(D22_MARK, PORT189_FN6), - PINMUX_DATA(ED22_MARK, PORT189_FN7), - PINMUX_DATA(LCDD15_MARK, PORT190_FN1), - PINMUX_DATA(DV_D15_MARK, PORT190_FN3), - PINMUX_DATA(D23_MARK, PORT190_FN6), - PINMUX_DATA(ED23_MARK, PORT190_FN7), - PINMUX_DATA(LCDD16_MARK, PORT191_FN1), - PINMUX_DATA(DV_HSYNC_MARK, PORT191_FN3), - PINMUX_DATA(D24_MARK, PORT191_FN6), - PINMUX_DATA(ED24_MARK, PORT191_FN7), - PINMUX_DATA(LCDD17_MARK, PORT192_FN1), - PINMUX_DATA(DV_VSYNC_MARK, PORT192_FN3), - PINMUX_DATA(D25_MARK, PORT192_FN6), - PINMUX_DATA(ED25_MARK, PORT192_FN7), - PINMUX_DATA(LCDD18_MARK, PORT193_FN1), - PINMUX_DATA(DREQ2_MARK, PORT193_FN2), - PINMUX_DATA(MSIOF0L_TSCK_MARK, PORT193_FN5), - PINMUX_DATA(D26_MARK, PORT193_FN6), - PINMUX_DATA(ED26_MARK, PORT193_FN7), - PINMUX_DATA(LCDD19_MARK, PORT194_FN1), - PINMUX_DATA(MSIOF0L_TSYNC_MARK, PORT194_FN5), - PINMUX_DATA(D27_MARK, PORT194_FN6), - PINMUX_DATA(ED27_MARK, PORT194_FN7), - PINMUX_DATA(LCDD20_MARK, PORT195_FN1), - PINMUX_DATA(TS_SPSYNC1_MARK, PORT195_FN2), - PINMUX_DATA(MSIOF0L_MCK0_MARK, PORT195_FN5), - PINMUX_DATA(D28_MARK, PORT195_FN6), - PINMUX_DATA(ED28_MARK, PORT195_FN7), - PINMUX_DATA(LCDD21_MARK, PORT196_FN1), - PINMUX_DATA(TS_SDAT1_MARK, PORT196_FN2), - PINMUX_DATA(MSIOF0L_MCK1_MARK, PORT196_FN5), - PINMUX_DATA(D29_MARK, PORT196_FN6), - PINMUX_DATA(ED29_MARK, PORT196_FN7), - PINMUX_DATA(LCDD22_MARK, PORT197_FN1), - PINMUX_DATA(TS_SDEN1_MARK, PORT197_FN2), - PINMUX_DATA(MSIOF0L_SS1_MARK, PORT197_FN5), - PINMUX_DATA(D30_MARK, PORT197_FN6), - PINMUX_DATA(ED30_MARK, PORT197_FN7), - PINMUX_DATA(LCDD23_MARK, PORT198_FN1), - PINMUX_DATA(TS_SCK1_MARK, PORT198_FN2), - PINMUX_DATA(MSIOF0L_SS2_MARK, PORT198_FN5), - PINMUX_DATA(D31_MARK, PORT198_FN6), - PINMUX_DATA(ED31_MARK, PORT198_FN7), - PINMUX_DATA(LCDDCK_MARK, PORT199_FN1), - PINMUX_DATA(LCDWR_MARK, PORT199_FN2), - PINMUX_DATA(DV_CKO_MARK, PORT199_FN3), - PINMUX_DATA(SIUAOSPD_MARK, PORT199_FN4), - PINMUX_DATA(LCDRD_MARK, PORT200_FN1), - PINMUX_DATA(DACK2_MARK, PORT200_FN2), - PINMUX_DATA(MSIOF0L_RSYNC_MARK, PORT200_FN5), - - /* 49-5 (FN) */ - PINMUX_DATA(LCDHSYN_MARK, PORT201_FN1), - PINMUX_DATA(LCDCS_MARK, PORT201_FN2), - PINMUX_DATA(LCDCS2_MARK, PORT201_FN3), - PINMUX_DATA(DACK3_MARK, PORT201_FN4), - PINMUX_DATA(LCDDISP_MARK, PORT202_FN1), - PINMUX_DATA(LCDRS_MARK, PORT202_FN2), - PINMUX_DATA(DREQ3_MARK, PORT202_FN4), - PINMUX_DATA(MSIOF0L_RSCK_MARK, PORT202_FN5), - PINMUX_DATA(LCDCSYN_MARK, PORT203_FN1), - PINMUX_DATA(LCDCSYN2_MARK, PORT203_FN2), - PINMUX_DATA(DV_CKI_MARK, PORT203_FN3), - PINMUX_DATA(LCDLCLK_MARK, PORT204_FN1), - PINMUX_DATA(DREQ1_MARK, PORT204_FN3), - PINMUX_DATA(MSIOF0L_RXD_MARK, PORT204_FN5), - PINMUX_DATA(LCDDON_MARK, PORT205_FN1), - PINMUX_DATA(LCDDON2_MARK, PORT205_FN2), - PINMUX_DATA(DACK1_MARK, PORT205_FN3), - PINMUX_DATA(MSIOF0L_TXD_MARK, PORT205_FN5), - PINMUX_DATA(VIO_DR0_MARK, PORT206_FN1), - PINMUX_DATA(VIO_DR1_MARK, PORT207_FN1), - PINMUX_DATA(VIO_DR2_MARK, PORT208_FN1), - PINMUX_DATA(VIO_DR3_MARK, PORT209_FN1), - PINMUX_DATA(VIO_DR4_MARK, PORT210_FN1), - PINMUX_DATA(VIO_DR5_MARK, PORT211_FN1), - PINMUX_DATA(VIO_DR6_MARK, PORT212_FN1), - PINMUX_DATA(VIO_DR7_MARK, PORT213_FN1), - PINMUX_DATA(VIO_VDR_MARK, PORT214_FN1), - PINMUX_DATA(VIO_HDR_MARK, PORT215_FN1), - PINMUX_DATA(VIO_CLKR_MARK, PORT216_FN1), - PINMUX_DATA(VIO_CKOR_MARK, PORT217_FN1), - PINMUX_DATA(SCIFA1_TXD_MARK, PORT220_FN2), - PINMUX_DATA(GPS_PGFA0_MARK, PORT220_FN3), - PINMUX_DATA(SCIFA1_SCK_MARK, PORT221_FN2), - PINMUX_DATA(GPS_PGFA1_MARK, PORT221_FN3), - PINMUX_DATA(SCIFA1_RTS_MARK, PORT222_FN2), - PINMUX_DATA(GPS_EPPSINMON_MARK, PORT222_FN3), - PINMUX_DATA(SCIFA1_RXD_MARK, PORT223_FN2), - PINMUX_DATA(SCIFA1_CTS_MARK, PORT224_FN2), - PINMUX_DATA(MSIOF1_TXD_MARK, PORT225_FN1), - PINMUX_DATA(SCIFA1_TXD2_MARK, PORT225_FN2), - PINMUX_DATA(GPS_TXD_MARK, PORT225_FN3), - PINMUX_DATA(MSIOF1_TSYNC_MARK, PORT226_FN1), - PINMUX_DATA(SCIFA1_CTS2_MARK, PORT226_FN2), - PINMUX_DATA(I2C_SDA2_MARK, PORT226_FN3), - PINMUX_DATA(MSIOF1_TSCK_MARK, PORT227_FN1), - PINMUX_DATA(SCIFA1_SCK2_MARK, PORT227_FN2), - PINMUX_DATA(MSIOF1_RXD_MARK, PORT228_FN1), - PINMUX_DATA(SCIFA1_RXD2_MARK, PORT228_FN2), - PINMUX_DATA(GPS_RXD_MARK, PORT228_FN3), - PINMUX_DATA(MSIOF1_RSCK_MARK, PORT229_FN1), - PINMUX_DATA(SCIFA1_RTS2_MARK, PORT229_FN2), - PINMUX_DATA(MSIOF1_RSYNC_MARK, PORT230_FN1), - PINMUX_DATA(I2C_SCL2_MARK, PORT230_FN3), - PINMUX_DATA(MSIOF1_MCK0_MARK, PORT231_FN1), - PINMUX_DATA(MSIOF1_MCK1_MARK, PORT232_FN1), - PINMUX_DATA(MSIOF1_SS1_MARK, PORT233_FN1), - PINMUX_DATA(EDBGREQ3_MARK, PORT233_FN2), - PINMUX_DATA(MSIOF1_SS2_MARK, PORT234_FN1), - PINMUX_DATA(PORT236_IROUT_MARK, PORT236_FN1), - PINMUX_DATA(IRDA_OUT_MARK, PORT236_FN2), - PINMUX_DATA(IRDA_IN_MARK, PORT237_FN2), - PINMUX_DATA(IRDA_FIRSEL_MARK, PORT238_FN1), - PINMUX_DATA(TPU1TO0_MARK, PORT239_FN3), - PINMUX_DATA(TS_SPSYNC3_MARK, PORT239_FN4), - PINMUX_DATA(TPU1TO1_MARK, PORT240_FN3), - PINMUX_DATA(TS_SDAT3_MARK, PORT240_FN4), - PINMUX_DATA(TPU1TO2_MARK, PORT241_FN3), - PINMUX_DATA(TS_SDEN3_MARK, PORT241_FN4), - PINMUX_DATA(PORT241_MSIOF2_SS1_MARK, PORT241_FN5), - PINMUX_DATA(TPU1TO3_MARK, PORT242_FN3), - PINMUX_DATA(PORT242_MSIOF2_TSCK_MARK, PORT242_FN5), - PINMUX_DATA(M13_BSW_MARK, PORT243_FN2), - PINMUX_DATA(PORT243_MSIOF2_TSYNC_MARK, PORT243_FN5), - PINMUX_DATA(M14_GSW_MARK, PORT244_FN2), - PINMUX_DATA(PORT244_MSIOF2_TXD_MARK, PORT244_FN5), - PINMUX_DATA(PORT245_IROUT_MARK, PORT245_FN1), - PINMUX_DATA(M15_RSW_MARK, PORT245_FN2), - PINMUX_DATA(SOUT3_MARK, PORT246_FN1), - PINMUX_DATA(SCIFA2_TXD1_MARK, PORT246_FN2), - PINMUX_DATA(SIN3_MARK, PORT247_FN1), - PINMUX_DATA(SCIFA2_RXD1_MARK, PORT247_FN2), - PINMUX_DATA(XRTS3_MARK, PORT248_FN1), - PINMUX_DATA(SCIFA2_RTS1_MARK, PORT248_FN2), - PINMUX_DATA(PORT248_MSIOF2_SS2_MARK, PORT248_FN5), - PINMUX_DATA(XCTS3_MARK, PORT249_FN1), - PINMUX_DATA(SCIFA2_CTS1_MARK, PORT249_FN2), - PINMUX_DATA(PORT249_MSIOF2_RXD_MARK, PORT249_FN5), - PINMUX_DATA(DINT_MARK, PORT250_FN1), - PINMUX_DATA(SCIFA2_SCK1_MARK, PORT250_FN2), - PINMUX_DATA(TS_SCK3_MARK, PORT250_FN4), - PINMUX_DATA(SDHICLK0_MARK, PORT251_FN1), - PINMUX_DATA(TCK2_MARK, PORT251_FN2), - PINMUX_DATA(SDHICD0_MARK, PORT252_FN1), - PINMUX_DATA(SDHID0_0_MARK, PORT253_FN1), - PINMUX_DATA(TMS2_MARK, PORT253_FN2), - PINMUX_DATA(SDHID0_1_MARK, PORT254_FN1), - PINMUX_DATA(TDO2_MARK, PORT254_FN2), - PINMUX_DATA(SDHID0_2_MARK, PORT255_FN1), - PINMUX_DATA(TDI2_MARK, PORT255_FN2), - PINMUX_DATA(SDHID0_3_MARK, PORT256_FN1), - PINMUX_DATA(RTCK2_MARK, PORT256_FN2), - - /* 49-6 (FN) */ - PINMUX_DATA(SDHICMD0_MARK, PORT257_FN1), - PINMUX_DATA(TRST2_MARK, PORT257_FN2), - PINMUX_DATA(SDHIWP0_MARK, PORT258_FN1), - PINMUX_DATA(EDBGREQ2_MARK, PORT258_FN2), - PINMUX_DATA(SDHICLK1_MARK, PORT259_FN1), - PINMUX_DATA(TCK3_MARK, PORT259_FN4), - PINMUX_DATA(SDHID1_0_MARK, PORT260_FN1), - PINMUX_DATA(M11_SLCD_SO2_MARK, PORT260_FN2), - PINMUX_DATA(TS_SPSYNC2_MARK, PORT260_FN3), - PINMUX_DATA(TMS3_MARK, PORT260_FN4), - PINMUX_DATA(SDHID1_1_MARK, PORT261_FN1), - PINMUX_DATA(M9_SLCD_AO2_MARK, PORT261_FN2), - PINMUX_DATA(TS_SDAT2_MARK, PORT261_FN3), - PINMUX_DATA(TDO3_MARK, PORT261_FN4), - PINMUX_DATA(SDHID1_2_MARK, PORT262_FN1), - PINMUX_DATA(M10_SLCD_CK2_MARK, PORT262_FN2), - PINMUX_DATA(TS_SDEN2_MARK, PORT262_FN3), - PINMUX_DATA(TDI3_MARK, PORT262_FN4), - PINMUX_DATA(SDHID1_3_MARK, PORT263_FN1), - PINMUX_DATA(M12_SLCD_CE2_MARK, PORT263_FN2), - PINMUX_DATA(TS_SCK2_MARK, PORT263_FN3), - PINMUX_DATA(RTCK3_MARK, PORT263_FN4), - PINMUX_DATA(SDHICMD1_MARK, PORT264_FN1), - PINMUX_DATA(TRST3_MARK, PORT264_FN4), - PINMUX_DATA(SDHICLK2_MARK, PORT265_FN1), - PINMUX_DATA(SCIFB_SCK_MARK, PORT265_FN2), - PINMUX_DATA(SDHID2_0_MARK, PORT266_FN1), - PINMUX_DATA(SCIFB_TXD_MARK, PORT266_FN2), - PINMUX_DATA(SDHID2_1_MARK, PORT267_FN1), - PINMUX_DATA(SCIFB_CTS_MARK, PORT267_FN2), - PINMUX_DATA(SDHID2_2_MARK, PORT268_FN1), - PINMUX_DATA(SCIFB_RXD_MARK, PORT268_FN2), - PINMUX_DATA(SDHID2_3_MARK, PORT269_FN1), - PINMUX_DATA(SCIFB_RTS_MARK, PORT269_FN2), - PINMUX_DATA(SDHICMD2_MARK, PORT270_FN1), - PINMUX_DATA(RESETOUTS_MARK, PORT271_FN1), - PINMUX_DATA(DIVLOCK_MARK, PORT272_FN1), -}; - -static struct pinmux_gpio pinmux_gpios[] = { - /* 49-1 -> 49-6 (GPIO) */ - GPIO_PORT_ALL(), - - /* Special Pull-up / Pull-down Functions */ - GPIO_FN(PORT48_KEYIN0_PU), GPIO_FN(PORT49_KEYIN1_PU), - GPIO_FN(PORT50_KEYIN2_PU), GPIO_FN(PORT55_KEYIN3_PU), - GPIO_FN(PORT56_KEYIN4_PU), GPIO_FN(PORT57_KEYIN5_PU), - GPIO_FN(PORT58_KEYIN6_PU), - - /* 49-1 (FN) */ - GPIO_FN(VBUS0), GPIO_FN(CPORT0), GPIO_FN(CPORT1), GPIO_FN(CPORT2), - GPIO_FN(CPORT3), GPIO_FN(CPORT4), GPIO_FN(CPORT5), GPIO_FN(CPORT6), - GPIO_FN(CPORT7), GPIO_FN(CPORT8), GPIO_FN(CPORT9), GPIO_FN(CPORT10), - GPIO_FN(CPORT11), GPIO_FN(SIN2), GPIO_FN(CPORT12), GPIO_FN(XCTS2), - GPIO_FN(CPORT13), GPIO_FN(RFSPO4), GPIO_FN(CPORT14), GPIO_FN(RFSPO5), - GPIO_FN(CPORT15), GPIO_FN(CPORT16), GPIO_FN(CPORT17), GPIO_FN(SOUT2), - GPIO_FN(CPORT18), GPIO_FN(XRTS2), GPIO_FN(CPORT19), GPIO_FN(CPORT20), - GPIO_FN(RFSPO6), GPIO_FN(CPORT21), GPIO_FN(STATUS0), GPIO_FN(CPORT22), - GPIO_FN(STATUS1), GPIO_FN(CPORT23), GPIO_FN(STATUS2), GPIO_FN(RFSPO7), - GPIO_FN(MPORT0), GPIO_FN(MPORT1), GPIO_FN(B_SYNLD1), GPIO_FN(B_SYNLD2), - GPIO_FN(XMAINPS), GPIO_FN(XDIVPS), GPIO_FN(XIDRST), GPIO_FN(IDCLK), - GPIO_FN(IDIO), GPIO_FN(SOUT1), GPIO_FN(SCIFA4_TXD), - GPIO_FN(M02_BERDAT), GPIO_FN(SIN1), GPIO_FN(SCIFA4_RXD), GPIO_FN(XWUP), - GPIO_FN(XRTS1), GPIO_FN(SCIFA4_RTS), GPIO_FN(M03_BERCLK), - GPIO_FN(XCTS1), GPIO_FN(SCIFA4_CTS), - - /* 49-2 (FN) */ - GPIO_FN(HSU_IQ_AGC6), GPIO_FN(MFG2_IN2), GPIO_FN(MSIOF2_MCK0), - GPIO_FN(HSU_IQ_AGC5), GPIO_FN(MFG2_IN1), GPIO_FN(MSIOF2_MCK1), - GPIO_FN(HSU_IQ_AGC4), GPIO_FN(MSIOF2_RSYNC), - GPIO_FN(HSU_IQ_AGC3), GPIO_FN(MFG2_OUT1), GPIO_FN(MSIOF2_RSCK), - GPIO_FN(HSU_IQ_AGC2), GPIO_FN(PORT42_KEYOUT0), - GPIO_FN(HSU_IQ_AGC1), GPIO_FN(PORT43_KEYOUT1), - GPIO_FN(HSU_IQ_AGC0), GPIO_FN(PORT44_KEYOUT2), - GPIO_FN(HSU_IQ_AGC_ST), GPIO_FN(PORT45_KEYOUT3), - GPIO_FN(HSU_IQ_PDO), GPIO_FN(PORT46_KEYOUT4), - GPIO_FN(HSU_IQ_PYO), GPIO_FN(PORT47_KEYOUT5), - GPIO_FN(HSU_EN_TXMUX_G3MO), GPIO_FN(PORT48_KEYIN0), - GPIO_FN(HSU_I_TXMUX_G3MO), GPIO_FN(PORT49_KEYIN1), - GPIO_FN(HSU_Q_TXMUX_G3MO), GPIO_FN(PORT50_KEYIN2), - GPIO_FN(HSU_SYO), GPIO_FN(PORT51_MSIOF2_TSYNC), - GPIO_FN(HSU_SDO), GPIO_FN(PORT52_MSIOF2_TSCK), - GPIO_FN(HSU_TGTTI_G3MO), GPIO_FN(PORT53_MSIOF2_TXD), - GPIO_FN(B_TIME_STAMP), GPIO_FN(PORT54_MSIOF2_RXD), - GPIO_FN(HSU_SDI), GPIO_FN(PORT55_KEYIN3), - GPIO_FN(HSU_SCO), GPIO_FN(PORT56_KEYIN4), - GPIO_FN(HSU_DREQ), GPIO_FN(PORT57_KEYIN5), - GPIO_FN(HSU_DACK), GPIO_FN(PORT58_KEYIN6), - GPIO_FN(HSU_CLK61M), GPIO_FN(PORT59_MSIOF2_SS1), - GPIO_FN(HSU_XRST), GPIO_FN(PORT60_MSIOF2_SS2), - GPIO_FN(PCMCLKO), GPIO_FN(SYNC8KO), GPIO_FN(DNPCM_A), GPIO_FN(UPPCM_A), - GPIO_FN(XTALB1L), - GPIO_FN(GPS_AGC1), GPIO_FN(SCIFA0_RTS), - GPIO_FN(GPS_AGC2), GPIO_FN(SCIFA0_SCK), - GPIO_FN(GPS_AGC3), GPIO_FN(SCIFA0_TXD), - GPIO_FN(GPS_AGC4), GPIO_FN(SCIFA0_RXD), - GPIO_FN(GPS_PWRD), GPIO_FN(SCIFA0_CTS), - GPIO_FN(GPS_IM), GPIO_FN(GPS_IS), GPIO_FN(GPS_QM), GPIO_FN(GPS_QS), - GPIO_FN(SIUBOMC), GPIO_FN(TPU2TO0), - GPIO_FN(SIUCKB), GPIO_FN(TPU2TO1), - GPIO_FN(SIUBOLR), GPIO_FN(BBIF2_TSYNC), GPIO_FN(TPU2TO2), - GPIO_FN(SIUBOBT), GPIO_FN(BBIF2_TSCK), GPIO_FN(TPU2TO3), - GPIO_FN(SIUBOSLD), GPIO_FN(BBIF2_TXD), GPIO_FN(TPU3TO0), - GPIO_FN(SIUBILR), GPIO_FN(TPU3TO1), - GPIO_FN(SIUBIBT), GPIO_FN(TPU3TO2), - GPIO_FN(SIUBISLD), GPIO_FN(TPU3TO3), - GPIO_FN(NMI), GPIO_FN(TPU4TO0), - GPIO_FN(DNPCM_M), GPIO_FN(TPU4TO1), GPIO_FN(TPU4TO2), GPIO_FN(TPU4TO3), - GPIO_FN(IRQ_TMPB), - GPIO_FN(PWEN), GPIO_FN(MFG1_OUT1), - GPIO_FN(OVCN), GPIO_FN(MFG1_IN1), - GPIO_FN(OVCN2), GPIO_FN(MFG1_IN2), - - /* 49-3 (FN) */ - GPIO_FN(RFSPO1), GPIO_FN(RFSPO2), GPIO_FN(RFSPO3), - GPIO_FN(PORT93_VIO_CKO2), - GPIO_FN(USBTERM), GPIO_FN(EXTLP), GPIO_FN(IDIN), - GPIO_FN(SCIFA5_CTS), GPIO_FN(MFG0_IN1), - GPIO_FN(SCIFA5_RTS), GPIO_FN(MFG0_IN2), - GPIO_FN(SCIFA5_RXD), - GPIO_FN(SCIFA5_TXD), - GPIO_FN(SCIFA5_SCK), GPIO_FN(MFG0_OUT1), - GPIO_FN(A0_EA0), GPIO_FN(BS), - GPIO_FN(A14_EA14), GPIO_FN(PORT102_KEYOUT0), - GPIO_FN(A15_EA15), GPIO_FN(PORT103_KEYOUT1), GPIO_FN(DV_CLKOL), - GPIO_FN(A16_EA16), GPIO_FN(PORT104_KEYOUT2), - GPIO_FN(DV_VSYNCL), GPIO_FN(MSIOF0_SS1), - GPIO_FN(A17_EA17), GPIO_FN(PORT105_KEYOUT3), - GPIO_FN(DV_HSYNCL), GPIO_FN(MSIOF0_TSYNC), - GPIO_FN(A18_EA18), GPIO_FN(PORT106_KEYOUT4), - GPIO_FN(DV_DL0), GPIO_FN(MSIOF0_TSCK), - GPIO_FN(A19_EA19), GPIO_FN(PORT107_KEYOUT5), - GPIO_FN(DV_DL1), GPIO_FN(MSIOF0_TXD), - GPIO_FN(A20_EA20), GPIO_FN(PORT108_KEYIN0), - GPIO_FN(DV_DL2), GPIO_FN(MSIOF0_RSCK), - GPIO_FN(A21_EA21), GPIO_FN(PORT109_KEYIN1), - GPIO_FN(DV_DL3), GPIO_FN(MSIOF0_RSYNC), - GPIO_FN(A22_EA22), GPIO_FN(PORT110_KEYIN2), - GPIO_FN(DV_DL4), GPIO_FN(MSIOF0_MCK0), - GPIO_FN(A23_EA23), GPIO_FN(PORT111_KEYIN3), - GPIO_FN(DV_DL5), GPIO_FN(MSIOF0_MCK1), - GPIO_FN(A24_EA24), GPIO_FN(PORT112_KEYIN4), - GPIO_FN(DV_DL6), GPIO_FN(MSIOF0_RXD), - GPIO_FN(A25_EA25), GPIO_FN(PORT113_KEYIN5), - GPIO_FN(DV_DL7), GPIO_FN(MSIOF0_SS2), - GPIO_FN(A26), GPIO_FN(PORT113_KEYIN6), GPIO_FN(DV_CLKIL), - GPIO_FN(D0_ED0_NAF0), GPIO_FN(D1_ED1_NAF1), GPIO_FN(D2_ED2_NAF2), - GPIO_FN(D3_ED3_NAF3), GPIO_FN(D4_ED4_NAF4), GPIO_FN(D5_ED5_NAF5), - GPIO_FN(D6_ED6_NAF6), GPIO_FN(D7_ED7_NAF7), GPIO_FN(D8_ED8_NAF8), - GPIO_FN(D9_ED9_NAF9), GPIO_FN(D10_ED10_NAF10), GPIO_FN(D11_ED11_NAF11), - GPIO_FN(D12_ED12_NAF12), GPIO_FN(D13_ED13_NAF13), - GPIO_FN(D14_ED14_NAF14), GPIO_FN(D15_ED15_NAF15), - GPIO_FN(CS4), GPIO_FN(CS5A), GPIO_FN(CS5B), GPIO_FN(FCE1), - GPIO_FN(CS6B), GPIO_FN(XCS2), GPIO_FN(FCE0), GPIO_FN(CS6A), - GPIO_FN(DACK0), GPIO_FN(WAIT), GPIO_FN(DREQ0), GPIO_FN(RD_XRD), - GPIO_FN(A27), GPIO_FN(RDWR_XWE), GPIO_FN(WE0_XWR0_FWE), - GPIO_FN(WE1_XWR1), GPIO_FN(FRB), GPIO_FN(CKO), - GPIO_FN(NBRSTOUT), GPIO_FN(NBRST), - - /* 49-4 (FN) */ - GPIO_FN(RFSPO0), GPIO_FN(PORT146_VIO_CKO2), GPIO_FN(TSTMD), - GPIO_FN(VIO_VD), GPIO_FN(VIO_HD), - GPIO_FN(VIO_D0), GPIO_FN(VIO_D1), GPIO_FN(VIO_D2), - GPIO_FN(VIO_D3), GPIO_FN(VIO_D4), GPIO_FN(VIO_D5), - GPIO_FN(VIO_D6), GPIO_FN(VIO_D7), GPIO_FN(VIO_D8), - GPIO_FN(VIO_D9), GPIO_FN(VIO_D10), GPIO_FN(VIO_D11), - GPIO_FN(VIO_D12), GPIO_FN(VIO_D13), GPIO_FN(VIO_D14), - GPIO_FN(VIO_D15), GPIO_FN(VIO_CLK), GPIO_FN(VIO_FIELD), - GPIO_FN(VIO_CKO), - GPIO_FN(MFG3_IN1), GPIO_FN(MFG3_IN2), - GPIO_FN(M9_SLCD_A01), GPIO_FN(MFG3_OUT1), GPIO_FN(TPU0TO0), - GPIO_FN(M10_SLCD_CK1), GPIO_FN(MFG4_IN1), GPIO_FN(TPU0TO1), - GPIO_FN(M11_SLCD_SO1), GPIO_FN(MFG4_IN2), GPIO_FN(TPU0TO2), - GPIO_FN(M12_SLCD_CE1), GPIO_FN(MFG4_OUT1), GPIO_FN(TPU0TO3), - GPIO_FN(LCDD0), GPIO_FN(PORT175_KEYOUT0), GPIO_FN(DV_D0), - GPIO_FN(SIUCKA), GPIO_FN(MFG0_OUT2), - GPIO_FN(LCDD1), GPIO_FN(PORT176_KEYOUT1), GPIO_FN(DV_D1), - GPIO_FN(SIUAOLR), GPIO_FN(BBIF2_TSYNC1), - GPIO_FN(LCDD2), GPIO_FN(PORT177_KEYOUT2), GPIO_FN(DV_D2), - GPIO_FN(SIUAOBT), GPIO_FN(BBIF2_TSCK1), - GPIO_FN(LCDD3), GPIO_FN(PORT178_KEYOUT3), GPIO_FN(DV_D3), - GPIO_FN(SIUAOSLD), GPIO_FN(BBIF2_TXD1), - GPIO_FN(LCDD4), GPIO_FN(PORT179_KEYOUT4), GPIO_FN(DV_D4), - GPIO_FN(SIUAISPD), GPIO_FN(MFG1_OUT2), - GPIO_FN(LCDD5), GPIO_FN(PORT180_KEYOUT5), GPIO_FN(DV_D5), - GPIO_FN(SIUAILR), GPIO_FN(MFG2_OUT2), - GPIO_FN(LCDD6), GPIO_FN(DV_D6), - GPIO_FN(SIUAIBT), GPIO_FN(MFG3_OUT2), GPIO_FN(XWR2), - GPIO_FN(LCDD7), GPIO_FN(DV_D7), - GPIO_FN(SIUAISLD), GPIO_FN(MFG4_OUT2), GPIO_FN(XWR3), - GPIO_FN(LCDD8), GPIO_FN(DV_D8), GPIO_FN(D16), GPIO_FN(ED16), - GPIO_FN(LCDD9), GPIO_FN(DV_D9), GPIO_FN(D17), GPIO_FN(ED17), - GPIO_FN(LCDD10), GPIO_FN(DV_D10), GPIO_FN(D18), GPIO_FN(ED18), - GPIO_FN(LCDD11), GPIO_FN(DV_D11), GPIO_FN(D19), GPIO_FN(ED19), - GPIO_FN(LCDD12), GPIO_FN(DV_D12), GPIO_FN(D20), GPIO_FN(ED20), - GPIO_FN(LCDD13), GPIO_FN(DV_D13), GPIO_FN(D21), GPIO_FN(ED21), - GPIO_FN(LCDD14), GPIO_FN(DV_D14), GPIO_FN(D22), GPIO_FN(ED22), - GPIO_FN(LCDD15), GPIO_FN(DV_D15), GPIO_FN(D23), GPIO_FN(ED23), - GPIO_FN(LCDD16), GPIO_FN(DV_HSYNC), GPIO_FN(D24), GPIO_FN(ED24), - GPIO_FN(LCDD17), GPIO_FN(DV_VSYNC), GPIO_FN(D25), GPIO_FN(ED25), - GPIO_FN(LCDD18), GPIO_FN(DREQ2), GPIO_FN(MSIOF0L_TSCK), - GPIO_FN(D26), GPIO_FN(ED26), - GPIO_FN(LCDD19), GPIO_FN(MSIOF0L_TSYNC), - GPIO_FN(D27), GPIO_FN(ED27), - GPIO_FN(LCDD20), GPIO_FN(TS_SPSYNC1), GPIO_FN(MSIOF0L_MCK0), - GPIO_FN(D28), GPIO_FN(ED28), - GPIO_FN(LCDD21), GPIO_FN(TS_SDAT1), GPIO_FN(MSIOF0L_MCK1), - GPIO_FN(D29), GPIO_FN(ED29), - GPIO_FN(LCDD22), GPIO_FN(TS_SDEN1), GPIO_FN(MSIOF0L_SS1), - GPIO_FN(D30), GPIO_FN(ED30), - GPIO_FN(LCDD23), GPIO_FN(TS_SCK1), GPIO_FN(MSIOF0L_SS2), - GPIO_FN(D31), GPIO_FN(ED31), - GPIO_FN(LCDDCK), GPIO_FN(LCDWR), GPIO_FN(DV_CKO), GPIO_FN(SIUAOSPD), - GPIO_FN(LCDRD), GPIO_FN(DACK2), GPIO_FN(MSIOF0L_RSYNC), - - /* 49-5 (FN) */ - GPIO_FN(LCDHSYN), GPIO_FN(LCDCS), GPIO_FN(LCDCS2), GPIO_FN(DACK3), - GPIO_FN(LCDDISP), GPIO_FN(LCDRS), GPIO_FN(DREQ3), GPIO_FN(MSIOF0L_RSCK), - GPIO_FN(LCDCSYN), GPIO_FN(LCDCSYN2), GPIO_FN(DV_CKI), - GPIO_FN(LCDLCLK), GPIO_FN(DREQ1), GPIO_FN(MSIOF0L_RXD), - GPIO_FN(LCDDON), GPIO_FN(LCDDON2), GPIO_FN(DACK1), GPIO_FN(MSIOF0L_TXD), - GPIO_FN(VIO_DR0), GPIO_FN(VIO_DR1), GPIO_FN(VIO_DR2), GPIO_FN(VIO_DR3), - GPIO_FN(VIO_DR4), GPIO_FN(VIO_DR5), GPIO_FN(VIO_DR6), GPIO_FN(VIO_DR7), - GPIO_FN(VIO_VDR), GPIO_FN(VIO_HDR), - GPIO_FN(VIO_CLKR), GPIO_FN(VIO_CKOR), - GPIO_FN(SCIFA1_TXD), GPIO_FN(GPS_PGFA0), - GPIO_FN(SCIFA1_SCK), GPIO_FN(GPS_PGFA1), - GPIO_FN(SCIFA1_RTS), GPIO_FN(GPS_EPPSINMON), - GPIO_FN(SCIFA1_RXD), GPIO_FN(SCIFA1_CTS), - GPIO_FN(MSIOF1_TXD), GPIO_FN(SCIFA1_TXD2), GPIO_FN(GPS_TXD), - GPIO_FN(MSIOF1_TSYNC), GPIO_FN(SCIFA1_CTS2), GPIO_FN(I2C_SDA2), - GPIO_FN(MSIOF1_TSCK), GPIO_FN(SCIFA1_SCK2), - GPIO_FN(MSIOF1_RXD), GPIO_FN(SCIFA1_RXD2), GPIO_FN(GPS_RXD), - GPIO_FN(MSIOF1_RSCK), GPIO_FN(SCIFA1_RTS2), - GPIO_FN(MSIOF1_RSYNC), GPIO_FN(I2C_SCL2), - GPIO_FN(MSIOF1_MCK0), GPIO_FN(MSIOF1_MCK1), - GPIO_FN(MSIOF1_SS1), GPIO_FN(EDBGREQ3), - GPIO_FN(MSIOF1_SS2), - GPIO_FN(PORT236_IROUT), GPIO_FN(IRDA_OUT), - GPIO_FN(IRDA_IN), GPIO_FN(IRDA_FIRSEL), - GPIO_FN(TPU1TO0), GPIO_FN(TS_SPSYNC3), - GPIO_FN(TPU1TO1), GPIO_FN(TS_SDAT3), - GPIO_FN(TPU1TO2), GPIO_FN(TS_SDEN3), GPIO_FN(PORT241_MSIOF2_SS1), - GPIO_FN(TPU1TO3), GPIO_FN(PORT242_MSIOF2_TSCK), - GPIO_FN(M13_BSW), GPIO_FN(PORT243_MSIOF2_TSYNC), - GPIO_FN(M14_GSW), GPIO_FN(PORT244_MSIOF2_TXD), - GPIO_FN(PORT245_IROUT), GPIO_FN(M15_RSW), - GPIO_FN(SOUT3), GPIO_FN(SCIFA2_TXD1), - GPIO_FN(SIN3), GPIO_FN(SCIFA2_RXD1), - GPIO_FN(XRTS3), GPIO_FN(SCIFA2_RTS1), GPIO_FN(PORT248_MSIOF2_SS2), - GPIO_FN(XCTS3), GPIO_FN(SCIFA2_CTS1), GPIO_FN(PORT249_MSIOF2_RXD), - GPIO_FN(DINT), GPIO_FN(SCIFA2_SCK1), GPIO_FN(TS_SCK3), - GPIO_FN(SDHICLK0), GPIO_FN(TCK2), - GPIO_FN(SDHICD0), - GPIO_FN(SDHID0_0), GPIO_FN(TMS2), - GPIO_FN(SDHID0_1), GPIO_FN(TDO2), - GPIO_FN(SDHID0_2), GPIO_FN(TDI2), - GPIO_FN(SDHID0_3), GPIO_FN(RTCK2), - - /* 49-6 (FN) */ - GPIO_FN(SDHICMD0), GPIO_FN(TRST2), - GPIO_FN(SDHIWP0), GPIO_FN(EDBGREQ2), - GPIO_FN(SDHICLK1), GPIO_FN(TCK3), - GPIO_FN(SDHID1_0), GPIO_FN(M11_SLCD_SO2), - GPIO_FN(TS_SPSYNC2), GPIO_FN(TMS3), - GPIO_FN(SDHID1_1), GPIO_FN(M9_SLCD_AO2), - GPIO_FN(TS_SDAT2), GPIO_FN(TDO3), - GPIO_FN(SDHID1_2), GPIO_FN(M10_SLCD_CK2), - GPIO_FN(TS_SDEN2), GPIO_FN(TDI3), - GPIO_FN(SDHID1_3), GPIO_FN(M12_SLCD_CE2), - GPIO_FN(TS_SCK2), GPIO_FN(RTCK3), - GPIO_FN(SDHICMD1), GPIO_FN(TRST3), - GPIO_FN(SDHICLK2), GPIO_FN(SCIFB_SCK), - GPIO_FN(SDHID2_0), GPIO_FN(SCIFB_TXD), - GPIO_FN(SDHID2_1), GPIO_FN(SCIFB_CTS), - GPIO_FN(SDHID2_2), GPIO_FN(SCIFB_RXD), - GPIO_FN(SDHID2_3), GPIO_FN(SCIFB_RTS), - GPIO_FN(SDHICMD2), - GPIO_FN(RESETOUTS), - GPIO_FN(DIVLOCK), -}; - -static struct pinmux_cfg_reg pinmux_config_regs[] = { - PORTCR(0, 0xe6050000), /* PORT0CR */ - PORTCR(1, 0xe6050001), /* PORT1CR */ - PORTCR(2, 0xe6050002), /* PORT2CR */ - PORTCR(3, 0xe6050003), /* PORT3CR */ - PORTCR(4, 0xe6050004), /* PORT4CR */ - PORTCR(5, 0xe6050005), /* PORT5CR */ - PORTCR(6, 0xe6050006), /* PORT6CR */ - PORTCR(7, 0xe6050007), /* PORT7CR */ - PORTCR(8, 0xe6050008), /* PORT8CR */ - PORTCR(9, 0xe6050009), /* PORT9CR */ - - PORTCR(10, 0xe605000a), /* PORT10CR */ - PORTCR(11, 0xe605000b), /* PORT11CR */ - PORTCR(12, 0xe605000c), /* PORT12CR */ - PORTCR(13, 0xe605000d), /* PORT13CR */ - PORTCR(14, 0xe605000e), /* PORT14CR */ - PORTCR(15, 0xe605000f), /* PORT15CR */ - PORTCR(16, 0xe6050010), /* PORT16CR */ - PORTCR(17, 0xe6050011), /* PORT17CR */ - PORTCR(18, 0xe6050012), /* PORT18CR */ - PORTCR(19, 0xe6050013), /* PORT19CR */ - - PORTCR(20, 0xe6050014), /* PORT20CR */ - PORTCR(21, 0xe6050015), /* PORT21CR */ - PORTCR(22, 0xe6050016), /* PORT22CR */ - PORTCR(23, 0xe6050017), /* PORT23CR */ - PORTCR(24, 0xe6050018), /* PORT24CR */ - PORTCR(25, 0xe6050019), /* PORT25CR */ - PORTCR(26, 0xe605001a), /* PORT26CR */ - PORTCR(27, 0xe605001b), /* PORT27CR */ - PORTCR(28, 0xe605001c), /* PORT28CR */ - PORTCR(29, 0xe605001d), /* PORT29CR */ - - PORTCR(30, 0xe605001e), /* PORT30CR */ - PORTCR(31, 0xe605001f), /* PORT31CR */ - PORTCR(32, 0xe6050020), /* PORT32CR */ - PORTCR(33, 0xe6050021), /* PORT33CR */ - PORTCR(34, 0xe6050022), /* PORT34CR */ - PORTCR(35, 0xe6050023), /* PORT35CR */ - PORTCR(36, 0xe6050024), /* PORT36CR */ - PORTCR(37, 0xe6050025), /* PORT37CR */ - PORTCR(38, 0xe6050026), /* PORT38CR */ - PORTCR(39, 0xe6050027), /* PORT39CR */ - - PORTCR(40, 0xe6050028), /* PORT40CR */ - PORTCR(41, 0xe6050029), /* PORT41CR */ - PORTCR(42, 0xe605002a), /* PORT42CR */ - PORTCR(43, 0xe605002b), /* PORT43CR */ - PORTCR(44, 0xe605002c), /* PORT44CR */ - PORTCR(45, 0xe605002d), /* PORT45CR */ - PORTCR(46, 0xe605002e), /* PORT46CR */ - PORTCR(47, 0xe605002f), /* PORT47CR */ - PORTCR(48, 0xe6050030), /* PORT48CR */ - PORTCR(49, 0xe6050031), /* PORT49CR */ - - PORTCR(50, 0xe6050032), /* PORT50CR */ - PORTCR(51, 0xe6050033), /* PORT51CR */ - PORTCR(52, 0xe6050034), /* PORT52CR */ - PORTCR(53, 0xe6050035), /* PORT53CR */ - PORTCR(54, 0xe6050036), /* PORT54CR */ - PORTCR(55, 0xe6050037), /* PORT55CR */ - PORTCR(56, 0xe6050038), /* PORT56CR */ - PORTCR(57, 0xe6050039), /* PORT57CR */ - PORTCR(58, 0xe605003a), /* PORT58CR */ - PORTCR(59, 0xe605003b), /* PORT59CR */ - - PORTCR(60, 0xe605003c), /* PORT60CR */ - PORTCR(61, 0xe605003d), /* PORT61CR */ - PORTCR(62, 0xe605003e), /* PORT62CR */ - PORTCR(63, 0xe605003f), /* PORT63CR */ - PORTCR(64, 0xe6050040), /* PORT64CR */ - PORTCR(65, 0xe6050041), /* PORT65CR */ - PORTCR(66, 0xe6050042), /* PORT66CR */ - PORTCR(67, 0xe6050043), /* PORT67CR */ - PORTCR(68, 0xe6050044), /* PORT68CR */ - PORTCR(69, 0xe6050045), /* PORT69CR */ - - PORTCR(70, 0xe6050046), /* PORT70CR */ - PORTCR(71, 0xe6050047), /* PORT71CR */ - PORTCR(72, 0xe6050048), /* PORT72CR */ - PORTCR(73, 0xe6050049), /* PORT73CR */ - PORTCR(74, 0xe605004a), /* PORT74CR */ - PORTCR(75, 0xe605004b), /* PORT75CR */ - PORTCR(76, 0xe605004c), /* PORT76CR */ - PORTCR(77, 0xe605004d), /* PORT77CR */ - PORTCR(78, 0xe605004e), /* PORT78CR */ - PORTCR(79, 0xe605004f), /* PORT79CR */ - - PORTCR(80, 0xe6050050), /* PORT80CR */ - PORTCR(81, 0xe6050051), /* PORT81CR */ - PORTCR(82, 0xe6050052), /* PORT82CR */ - PORTCR(83, 0xe6050053), /* PORT83CR */ - PORTCR(84, 0xe6050054), /* PORT84CR */ - PORTCR(85, 0xe6050055), /* PORT85CR */ - PORTCR(86, 0xe6050056), /* PORT86CR */ - PORTCR(87, 0xe6050057), /* PORT87CR */ - PORTCR(88, 0xe6051058), /* PORT88CR */ - PORTCR(89, 0xe6051059), /* PORT89CR */ - - PORTCR(90, 0xe605105a), /* PORT90CR */ - PORTCR(91, 0xe605105b), /* PORT91CR */ - PORTCR(92, 0xe605105c), /* PORT92CR */ - PORTCR(93, 0xe605105d), /* PORT93CR */ - PORTCR(94, 0xe605105e), /* PORT94CR */ - PORTCR(95, 0xe605105f), /* PORT95CR */ - PORTCR(96, 0xe6051060), /* PORT96CR */ - PORTCR(97, 0xe6051061), /* PORT97CR */ - PORTCR(98, 0xe6051062), /* PORT98CR */ - PORTCR(99, 0xe6051063), /* PORT99CR */ - - PORTCR(100, 0xe6051064), /* PORT100CR */ - PORTCR(101, 0xe6051065), /* PORT101CR */ - PORTCR(102, 0xe6051066), /* PORT102CR */ - PORTCR(103, 0xe6051067), /* PORT103CR */ - PORTCR(104, 0xe6051068), /* PORT104CR */ - PORTCR(105, 0xe6051069), /* PORT105CR */ - PORTCR(106, 0xe605106a), /* PORT106CR */ - PORTCR(107, 0xe605106b), /* PORT107CR */ - PORTCR(108, 0xe605106c), /* PORT108CR */ - PORTCR(109, 0xe605106d), /* PORT109CR */ - - PORTCR(110, 0xe605106e), /* PORT110CR */ - PORTCR(111, 0xe605106f), /* PORT111CR */ - PORTCR(112, 0xe6051070), /* PORT112CR */ - PORTCR(113, 0xe6051071), /* PORT113CR */ - PORTCR(114, 0xe6051072), /* PORT114CR */ - PORTCR(115, 0xe6051073), /* PORT115CR */ - PORTCR(116, 0xe6051074), /* PORT116CR */ - PORTCR(117, 0xe6051075), /* PORT117CR */ - PORTCR(118, 0xe6051076), /* PORT118CR */ - PORTCR(119, 0xe6051077), /* PORT119CR */ - - PORTCR(120, 0xe6051078), /* PORT120CR */ - PORTCR(121, 0xe6051079), /* PORT121CR */ - PORTCR(122, 0xe605107a), /* PORT122CR */ - PORTCR(123, 0xe605107b), /* PORT123CR */ - PORTCR(124, 0xe605107c), /* PORT124CR */ - PORTCR(125, 0xe605107d), /* PORT125CR */ - PORTCR(126, 0xe605107e), /* PORT126CR */ - PORTCR(127, 0xe605107f), /* PORT127CR */ - PORTCR(128, 0xe6051080), /* PORT128CR */ - PORTCR(129, 0xe6051081), /* PORT129CR */ - - PORTCR(130, 0xe6051082), /* PORT130CR */ - PORTCR(131, 0xe6051083), /* PORT131CR */ - PORTCR(132, 0xe6051084), /* PORT132CR */ - PORTCR(133, 0xe6051085), /* PORT133CR */ - PORTCR(134, 0xe6051086), /* PORT134CR */ - PORTCR(135, 0xe6051087), /* PORT135CR */ - PORTCR(136, 0xe6051088), /* PORT136CR */ - PORTCR(137, 0xe6051089), /* PORT137CR */ - PORTCR(138, 0xe605108a), /* PORT138CR */ - PORTCR(139, 0xe605108b), /* PORT139CR */ - - PORTCR(140, 0xe605108c), /* PORT140CR */ - PORTCR(141, 0xe605108d), /* PORT141CR */ - PORTCR(142, 0xe605108e), /* PORT142CR */ - PORTCR(143, 0xe605108f), /* PORT143CR */ - PORTCR(144, 0xe6051090), /* PORT144CR */ - PORTCR(145, 0xe6051091), /* PORT145CR */ - PORTCR(146, 0xe6051092), /* PORT146CR */ - PORTCR(147, 0xe6051093), /* PORT147CR */ - PORTCR(148, 0xe6051094), /* PORT148CR */ - PORTCR(149, 0xe6051095), /* PORT149CR */ - - PORTCR(150, 0xe6051096), /* PORT150CR */ - PORTCR(151, 0xe6051097), /* PORT151CR */ - PORTCR(152, 0xe6051098), /* PORT152CR */ - PORTCR(153, 0xe6051099), /* PORT153CR */ - PORTCR(154, 0xe605109a), /* PORT154CR */ - PORTCR(155, 0xe605109b), /* PORT155CR */ - PORTCR(156, 0xe605109c), /* PORT156CR */ - PORTCR(157, 0xe605109d), /* PORT157CR */ - PORTCR(158, 0xe605109e), /* PORT158CR */ - PORTCR(159, 0xe605109f), /* PORT159CR */ - - PORTCR(160, 0xe60510a0), /* PORT160CR */ - PORTCR(161, 0xe60510a1), /* PORT161CR */ - PORTCR(162, 0xe60510a2), /* PORT162CR */ - PORTCR(163, 0xe60510a3), /* PORT163CR */ - PORTCR(164, 0xe60510a4), /* PORT164CR */ - PORTCR(165, 0xe60510a5), /* PORT165CR */ - PORTCR(166, 0xe60510a6), /* PORT166CR */ - PORTCR(167, 0xe60510a7), /* PORT167CR */ - PORTCR(168, 0xe60510a8), /* PORT168CR */ - PORTCR(169, 0xe60510a9), /* PORT169CR */ - - PORTCR(170, 0xe60510aa), /* PORT170CR */ - PORTCR(171, 0xe60510ab), /* PORT171CR */ - PORTCR(172, 0xe60510ac), /* PORT172CR */ - PORTCR(173, 0xe60510ad), /* PORT173CR */ - PORTCR(174, 0xe60510ae), /* PORT174CR */ - PORTCR(175, 0xe60520af), /* PORT175CR */ - PORTCR(176, 0xe60520b0), /* PORT176CR */ - PORTCR(177, 0xe60520b1), /* PORT177CR */ - PORTCR(178, 0xe60520b2), /* PORT178CR */ - PORTCR(179, 0xe60520b3), /* PORT179CR */ - - PORTCR(180, 0xe60520b4), /* PORT180CR */ - PORTCR(181, 0xe60520b5), /* PORT181CR */ - PORTCR(182, 0xe60520b6), /* PORT182CR */ - PORTCR(183, 0xe60520b7), /* PORT183CR */ - PORTCR(184, 0xe60520b8), /* PORT184CR */ - PORTCR(185, 0xe60520b9), /* PORT185CR */ - PORTCR(186, 0xe60520ba), /* PORT186CR */ - PORTCR(187, 0xe60520bb), /* PORT187CR */ - PORTCR(188, 0xe60520bc), /* PORT188CR */ - PORTCR(189, 0xe60520bd), /* PORT189CR */ - - PORTCR(190, 0xe60520be), /* PORT190CR */ - PORTCR(191, 0xe60520bf), /* PORT191CR */ - PORTCR(192, 0xe60520c0), /* PORT192CR */ - PORTCR(193, 0xe60520c1), /* PORT193CR */ - PORTCR(194, 0xe60520c2), /* PORT194CR */ - PORTCR(195, 0xe60520c3), /* PORT195CR */ - PORTCR(196, 0xe60520c4), /* PORT196CR */ - PORTCR(197, 0xe60520c5), /* PORT197CR */ - PORTCR(198, 0xe60520c6), /* PORT198CR */ - PORTCR(199, 0xe60520c7), /* PORT199CR */ - - PORTCR(200, 0xe60520c8), /* PORT200CR */ - PORTCR(201, 0xe60520c9), /* PORT201CR */ - PORTCR(202, 0xe60520ca), /* PORT202CR */ - PORTCR(203, 0xe60520cb), /* PORT203CR */ - PORTCR(204, 0xe60520cc), /* PORT204CR */ - PORTCR(205, 0xe60520cd), /* PORT205CR */ - PORTCR(206, 0xe60520ce), /* PORT206CR */ - PORTCR(207, 0xe60520cf), /* PORT207CR */ - PORTCR(208, 0xe60520d0), /* PORT208CR */ - PORTCR(209, 0xe60520d1), /* PORT209CR */ - - PORTCR(210, 0xe60520d2), /* PORT210CR */ - PORTCR(211, 0xe60520d3), /* PORT211CR */ - PORTCR(212, 0xe60520d4), /* PORT212CR */ - PORTCR(213, 0xe60520d5), /* PORT213CR */ - PORTCR(214, 0xe60520d6), /* PORT214CR */ - PORTCR(215, 0xe60520d7), /* PORT215CR */ - PORTCR(216, 0xe60520d8), /* PORT216CR */ - PORTCR(217, 0xe60520d9), /* PORT217CR */ - PORTCR(218, 0xe60520da), /* PORT218CR */ - PORTCR(219, 0xe60520db), /* PORT219CR */ - - PORTCR(220, 0xe60520dc), /* PORT220CR */ - PORTCR(221, 0xe60520dd), /* PORT221CR */ - PORTCR(222, 0xe60520de), /* PORT222CR */ - PORTCR(223, 0xe60520df), /* PORT223CR */ - PORTCR(224, 0xe60520e0), /* PORT224CR */ - PORTCR(225, 0xe60520e1), /* PORT225CR */ - PORTCR(226, 0xe60520e2), /* PORT226CR */ - PORTCR(227, 0xe60520e3), /* PORT227CR */ - PORTCR(228, 0xe60520e4), /* PORT228CR */ - PORTCR(229, 0xe60520e5), /* PORT229CR */ - - PORTCR(230, 0xe60520e6), /* PORT230CR */ - PORTCR(231, 0xe60520e7), /* PORT231CR */ - PORTCR(232, 0xe60520e8), /* PORT232CR */ - PORTCR(233, 0xe60520e9), /* PORT233CR */ - PORTCR(234, 0xe60520ea), /* PORT234CR */ - PORTCR(235, 0xe60520eb), /* PORT235CR */ - PORTCR(236, 0xe60530ec), /* PORT236CR */ - PORTCR(237, 0xe60530ed), /* PORT237CR */ - PORTCR(238, 0xe60530ee), /* PORT238CR */ - PORTCR(239, 0xe60530ef), /* PORT239CR */ - - PORTCR(240, 0xe60530f0), /* PORT240CR */ - PORTCR(241, 0xe60530f1), /* PORT241CR */ - PORTCR(242, 0xe60530f2), /* PORT242CR */ - PORTCR(243, 0xe60530f3), /* PORT243CR */ - PORTCR(244, 0xe60530f4), /* PORT244CR */ - PORTCR(245, 0xe60530f5), /* PORT245CR */ - PORTCR(246, 0xe60530f6), /* PORT246CR */ - PORTCR(247, 0xe60530f7), /* PORT247CR */ - PORTCR(248, 0xe60530f8), /* PORT248CR */ - PORTCR(249, 0xe60530f9), /* PORT249CR */ - - PORTCR(250, 0xe60530fa), /* PORT250CR */ - PORTCR(251, 0xe60530fb), /* PORT251CR */ - PORTCR(252, 0xe60530fc), /* PORT252CR */ - PORTCR(253, 0xe60530fd), /* PORT253CR */ - PORTCR(254, 0xe60530fe), /* PORT254CR */ - PORTCR(255, 0xe60530ff), /* PORT255CR */ - PORTCR(256, 0xe6053100), /* PORT256CR */ - PORTCR(257, 0xe6053101), /* PORT257CR */ - PORTCR(258, 0xe6053102), /* PORT258CR */ - PORTCR(259, 0xe6053103), /* PORT259CR */ - - PORTCR(260, 0xe6053104), /* PORT260CR */ - PORTCR(261, 0xe6053105), /* PORT261CR */ - PORTCR(262, 0xe6053106), /* PORT262CR */ - PORTCR(263, 0xe6053107), /* PORT263CR */ - PORTCR(264, 0xe6053108), /* PORT264CR */ - PORTCR(265, 0xe6053109), /* PORT265CR */ - PORTCR(266, 0xe605310a), /* PORT266CR */ - PORTCR(267, 0xe605310b), /* PORT267CR */ - PORTCR(268, 0xe605310c), /* PORT268CR */ - PORTCR(269, 0xe605310d), /* PORT269CR */ - - PORTCR(270, 0xe605310e), /* PORT270CR */ - PORTCR(271, 0xe605310f), /* PORT271CR */ - PORTCR(272, 0xe6053110), /* PORT272CR */ - - { PINMUX_CFG_REG("MSELBCR", 0xe6058024, 32, 1) { - 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, - 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, - 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, - 0, 0, - 0, 0, - 0, 0, - 0, 0, - 0, 0, - MSELBCR_MSEL2_0, MSELBCR_MSEL2_1, - 0, 0, - 0, 0 } - }, - { }, -}; - -static struct pinmux_data_reg pinmux_data_regs[] = { - { PINMUX_DATA_REG("PORTL031_000DR", 0xe6054000, 32) { - PORT31_DATA, PORT30_DATA, PORT29_DATA, PORT28_DATA, - PORT27_DATA, PORT26_DATA, PORT25_DATA, PORT24_DATA, - PORT23_DATA, PORT22_DATA, PORT21_DATA, PORT20_DATA, - PORT19_DATA, PORT18_DATA, PORT17_DATA, PORT16_DATA, - PORT15_DATA, PORT14_DATA, PORT13_DATA, PORT12_DATA, - PORT11_DATA, PORT10_DATA, PORT9_DATA, PORT8_DATA, - PORT7_DATA, PORT6_DATA, PORT5_DATA, PORT4_DATA, - PORT3_DATA, PORT2_DATA, PORT1_DATA, PORT0_DATA } - }, - { PINMUX_DATA_REG("PORTL063_032DR", 0xe6054004, 32) { - PORT63_DATA, PORT62_DATA, PORT61_DATA, PORT60_DATA, - PORT59_DATA, PORT58_DATA, PORT57_DATA, PORT56_DATA, - PORT55_DATA, PORT54_DATA, PORT53_DATA, PORT52_DATA, - PORT51_DATA, PORT50_DATA, PORT49_DATA, PORT48_DATA, - PORT47_DATA, PORT46_DATA, PORT45_DATA, PORT44_DATA, - PORT43_DATA, PORT42_DATA, PORT41_DATA, PORT40_DATA, - PORT39_DATA, PORT38_DATA, PORT37_DATA, PORT36_DATA, - PORT35_DATA, PORT34_DATA, PORT33_DATA, PORT32_DATA } - }, - { PINMUX_DATA_REG("PORTL095_064DR", 0xe6054008, 32) { - PORT95_DATA, PORT94_DATA, PORT93_DATA, PORT92_DATA, - PORT91_DATA, PORT90_DATA, PORT89_DATA, PORT88_DATA, - PORT87_DATA, PORT86_DATA, PORT85_DATA, PORT84_DATA, - PORT83_DATA, PORT82_DATA, PORT81_DATA, PORT80_DATA, - PORT79_DATA, PORT78_DATA, PORT77_DATA, PORT76_DATA, - PORT75_DATA, PORT74_DATA, PORT73_DATA, PORT72_DATA, - PORT71_DATA, PORT70_DATA, PORT69_DATA, PORT68_DATA, - PORT67_DATA, PORT66_DATA, PORT65_DATA, PORT64_DATA } - }, - { PINMUX_DATA_REG("PORTD127_096DR", 0xe6055004, 32) { - PORT127_DATA, PORT126_DATA, PORT125_DATA, PORT124_DATA, - PORT123_DATA, PORT122_DATA, PORT121_DATA, PORT120_DATA, - PORT119_DATA, PORT118_DATA, PORT117_DATA, PORT116_DATA, - PORT115_DATA, PORT114_DATA, PORT113_DATA, PORT112_DATA, - PORT111_DATA, PORT110_DATA, PORT109_DATA, PORT108_DATA, - PORT107_DATA, PORT106_DATA, PORT105_DATA, PORT104_DATA, - PORT103_DATA, PORT102_DATA, PORT101_DATA, PORT100_DATA, - PORT99_DATA, PORT98_DATA, PORT97_DATA, PORT96_DATA } - }, - { PINMUX_DATA_REG("PORTD159_128DR", 0xe6055008, 32) { - PORT159_DATA, PORT158_DATA, PORT157_DATA, PORT156_DATA, - PORT155_DATA, PORT154_DATA, PORT153_DATA, PORT152_DATA, - PORT151_DATA, PORT150_DATA, PORT149_DATA, PORT148_DATA, - PORT147_DATA, PORT146_DATA, PORT145_DATA, PORT144_DATA, - PORT143_DATA, PORT142_DATA, PORT141_DATA, PORT140_DATA, - PORT139_DATA, PORT138_DATA, PORT137_DATA, PORT136_DATA, - PORT135_DATA, PORT134_DATA, PORT133_DATA, PORT132_DATA, - PORT131_DATA, PORT130_DATA, PORT129_DATA, PORT128_DATA } - }, - { PINMUX_DATA_REG("PORTR191_160DR", 0xe6056000, 32) { - PORT191_DATA, PORT190_DATA, PORT189_DATA, PORT188_DATA, - PORT187_DATA, PORT186_DATA, PORT185_DATA, PORT184_DATA, - PORT183_DATA, PORT182_DATA, PORT181_DATA, PORT180_DATA, - PORT179_DATA, PORT178_DATA, PORT177_DATA, PORT176_DATA, - PORT175_DATA, PORT174_DATA, PORT173_DATA, PORT172_DATA, - PORT171_DATA, PORT170_DATA, PORT169_DATA, PORT168_DATA, - PORT167_DATA, PORT166_DATA, PORT165_DATA, PORT164_DATA, - PORT163_DATA, PORT162_DATA, PORT161_DATA, PORT160_DATA } - }, - { PINMUX_DATA_REG("PORTR223_192DR", 0xe6056004, 32) { - PORT223_DATA, PORT222_DATA, PORT221_DATA, PORT220_DATA, - PORT219_DATA, PORT218_DATA, PORT217_DATA, PORT216_DATA, - PORT215_DATA, PORT214_DATA, PORT213_DATA, PORT212_DATA, - PORT211_DATA, PORT210_DATA, PORT209_DATA, PORT208_DATA, - PORT207_DATA, PORT206_DATA, PORT205_DATA, PORT204_DATA, - PORT203_DATA, PORT202_DATA, PORT201_DATA, PORT200_DATA, - PORT199_DATA, PORT198_DATA, PORT197_DATA, PORT196_DATA, - PORT195_DATA, PORT194_DATA, PORT193_DATA, PORT192_DATA } - }, - { PINMUX_DATA_REG("PORTU255_224DR", 0xe6057000, 32) { - PORT255_DATA, PORT254_DATA, PORT253_DATA, PORT252_DATA, - PORT251_DATA, PORT250_DATA, PORT249_DATA, PORT248_DATA, - PORT247_DATA, PORT246_DATA, PORT245_DATA, PORT244_DATA, - PORT243_DATA, PORT242_DATA, PORT241_DATA, PORT240_DATA, - PORT239_DATA, PORT238_DATA, PORT237_DATA, PORT236_DATA, - PORT235_DATA, PORT234_DATA, PORT233_DATA, PORT232_DATA, - PORT231_DATA, PORT230_DATA, PORT229_DATA, PORT228_DATA, - PORT227_DATA, PORT226_DATA, PORT225_DATA, PORT224_DATA } - }, - { PINMUX_DATA_REG("PORTU287_256DR", 0xe6057004, 32) { - 0, 0, 0, 0, - 0, 0, 0, 0, - 0, 0, 0, 0, - 0, 0, 0, PORT272_DATA, - PORT271_DATA, PORT270_DATA, PORT269_DATA, PORT268_DATA, - PORT267_DATA, PORT266_DATA, PORT265_DATA, PORT264_DATA, - PORT263_DATA, PORT262_DATA, PORT261_DATA, PORT260_DATA, - PORT259_DATA, PORT258_DATA, PORT257_DATA, PORT256_DATA } - }, - { }, -}; - -static struct pinmux_info sh7367_pinmux_info = { - .name = "sh7367_pfc", - .reserved_id = PINMUX_RESERVED, - .data = { PINMUX_DATA_BEGIN, PINMUX_DATA_END }, - .input = { PINMUX_INPUT_BEGIN, PINMUX_INPUT_END }, - .input_pu = { PINMUX_INPUT_PULLUP_BEGIN, PINMUX_INPUT_PULLUP_END }, - .input_pd = { PINMUX_INPUT_PULLDOWN_BEGIN, PINMUX_INPUT_PULLDOWN_END }, - .output = { PINMUX_OUTPUT_BEGIN, PINMUX_OUTPUT_END }, - .mark = { PINMUX_MARK_BEGIN, PINMUX_MARK_END }, - .function = { PINMUX_FUNCTION_BEGIN, PINMUX_FUNCTION_END }, - - .first_gpio = GPIO_PORT0, - .last_gpio = GPIO_FN_DIVLOCK, - - .gpios = pinmux_gpios, - .cfg_regs = pinmux_config_regs, - .data_regs = pinmux_data_regs, - - .gpio_data = pinmux_data, - .gpio_data_size = ARRAY_SIZE(pinmux_data), -}; - -void sh7367_pinmux_init(void) -{ - register_pinmux(&sh7367_pinmux_info); -} diff --git a/arch/arm/mach-shmobile/setup-sh7367.c b/arch/arm/mach-shmobile/setup-sh7367.c deleted file mode 100644 index e647f54..0000000 --- a/arch/arm/mach-shmobile/setup-sh7367.c +++ /dev/null @@ -1,481 +0,0 @@ -/* - * sh7367 processor support - * - * Copyright (C) 2010 Magnus Damm - * Copyright (C) 2008 Yoshihiro Shimoda - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -static struct map_desc sh7367_io_desc[] __initdata = { - /* create a 1:1 entity map for 0xe6xxxxxx - * used by CPGA, INTC and PFC. - */ - { - .virtual = 0xe6000000, - .pfn = __phys_to_pfn(0xe6000000), - .length = 256 << 20, - .type = MT_DEVICE_NONSHARED - }, -}; - -void __init sh7367_map_io(void) -{ - iotable_init(sh7367_io_desc, ARRAY_SIZE(sh7367_io_desc)); -} - -/* SCIFA0 */ -static struct plat_sci_port scif0_platform_data = { - .mapbase = 0xe6c40000, - .flags = UPF_BOOT_AUTOCONF, - .scscr = SCSCR_RE | SCSCR_TE, - .scbrr_algo_id = SCBRR_ALGO_4, - .type = PORT_SCIFA, - .irqs = { evt2irq(0xc00), evt2irq(0xc00), - evt2irq(0xc00), evt2irq(0xc00) }, -}; - -static struct platform_device scif0_device = { - .name = "sh-sci", - .id = 0, - .dev = { - .platform_data = &scif0_platform_data, - }, -}; - -/* SCIFA1 */ -static struct plat_sci_port scif1_platform_data = { - .mapbase = 0xe6c50000, - .flags = UPF_BOOT_AUTOCONF, - .scscr = SCSCR_RE | SCSCR_TE, - .scbrr_algo_id = SCBRR_ALGO_4, - .type = PORT_SCIFA, - .irqs = { evt2irq(0xc20), evt2irq(0xc20), - evt2irq(0xc20), evt2irq(0xc20) }, -}; - -static struct platform_device scif1_device = { - .name = "sh-sci", - .id = 1, - .dev = { - .platform_data = &scif1_platform_data, - }, -}; - -/* SCIFA2 */ -static struct plat_sci_port scif2_platform_data = { - .mapbase = 0xe6c60000, - .flags = UPF_BOOT_AUTOCONF, - .scscr = SCSCR_RE | SCSCR_TE, - .scbrr_algo_id = SCBRR_ALGO_4, - .type = PORT_SCIFA, - .irqs = { evt2irq(0xc40), evt2irq(0xc40), - evt2irq(0xc40), evt2irq(0xc40) }, -}; - -static struct platform_device scif2_device = { - .name = "sh-sci", - .id = 2, - .dev = { - .platform_data = &scif2_platform_data, - }, -}; - -/* SCIFA3 */ -static struct plat_sci_port scif3_platform_data = { - .mapbase = 0xe6c70000, - .flags = UPF_BOOT_AUTOCONF, - .scscr = SCSCR_RE | SCSCR_TE, - .scbrr_algo_id = SCBRR_ALGO_4, - .type = PORT_SCIFA, - .irqs = { evt2irq(0xc60), evt2irq(0xc60), - evt2irq(0xc60), evt2irq(0xc60) }, -}; - -static struct platform_device scif3_device = { - .name = "sh-sci", - .id = 3, - .dev = { - .platform_data = &scif3_platform_data, - }, -}; - -/* SCIFA4 */ -static struct plat_sci_port scif4_platform_data = { - .mapbase = 0xe6c80000, - .flags = UPF_BOOT_AUTOCONF, - .scscr = SCSCR_RE | SCSCR_TE, - .scbrr_algo_id = SCBRR_ALGO_4, - .type = PORT_SCIFA, - .irqs = { evt2irq(0xd20), evt2irq(0xd20), - evt2irq(0xd20), evt2irq(0xd20) }, -}; - -static struct platform_device scif4_device = { - .name = "sh-sci", - .id = 4, - .dev = { - .platform_data = &scif4_platform_data, - }, -}; - -/* SCIFA5 */ -static struct plat_sci_port scif5_platform_data = { - .mapbase = 0xe6cb0000, - .flags = UPF_BOOT_AUTOCONF, - .scscr = SCSCR_RE | SCSCR_TE, - .scbrr_algo_id = SCBRR_ALGO_4, - .type = PORT_SCIFA, - .irqs = { evt2irq(0xd40), evt2irq(0xd40), - evt2irq(0xd40), evt2irq(0xd40) }, -}; - -static struct platform_device scif5_device = { - .name = "sh-sci", - .id = 5, - .dev = { - .platform_data = &scif5_platform_data, - }, -}; - -/* SCIFB */ -static struct plat_sci_port scif6_platform_data = { - .mapbase = 0xe6c30000, - .flags = UPF_BOOT_AUTOCONF, - .scscr = SCSCR_RE | SCSCR_TE, - .scbrr_algo_id = SCBRR_ALGO_4, - .type = PORT_SCIFB, - .irqs = { evt2irq(0xd60), evt2irq(0xd60), - evt2irq(0xd60), evt2irq(0xd60) }, -}; - -static struct platform_device scif6_device = { - .name = "sh-sci", - .id = 6, - .dev = { - .platform_data = &scif6_platform_data, - }, -}; - -static struct sh_timer_config cmt10_platform_data = { - .name = "CMT10", - .channel_offset = 0x10, - .timer_bit = 0, - .clockevent_rating = 125, - .clocksource_rating = 125, -}; - -static struct resource cmt10_resources[] = { - [0] = { - .name = "CMT10", - .start = 0xe6138010, - .end = 0xe613801b, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = evt2irq(0xb00), /* CMT1_CMT10 */ - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device cmt10_device = { - .name = "sh_cmt", - .id = 10, - .dev = { - .platform_data = &cmt10_platform_data, - }, - .resource = cmt10_resources, - .num_resources = ARRAY_SIZE(cmt10_resources), -}; - -/* VPU */ -static struct uio_info vpu_platform_data = { - .name = "VPU5", - .version = "0", - .irq = intcs_evt2irq(0x980), -}; - -static struct resource vpu_resources[] = { - [0] = { - .name = "VPU", - .start = 0xfe900000, - .end = 0xfe902807, - .flags = IORESOURCE_MEM, - }, -}; - -static struct platform_device vpu_device = { - .name = "uio_pdrv_genirq", - .id = 0, - .dev = { - .platform_data = &vpu_platform_data, - }, - .resource = vpu_resources, - .num_resources = ARRAY_SIZE(vpu_resources), -}; - -/* VEU0 */ -static struct uio_info veu0_platform_data = { - .name = "VEU0", - .version = "0", - .irq = intcs_evt2irq(0x700), -}; - -static struct resource veu0_resources[] = { - [0] = { - .name = "VEU0", - .start = 0xfe920000, - .end = 0xfe9200b7, - .flags = IORESOURCE_MEM, - }, -}; - -static struct platform_device veu0_device = { - .name = "uio_pdrv_genirq", - .id = 1, - .dev = { - .platform_data = &veu0_platform_data, - }, - .resource = veu0_resources, - .num_resources = ARRAY_SIZE(veu0_resources), -}; - -/* VEU1 */ -static struct uio_info veu1_platform_data = { - .name = "VEU1", - .version = "0", - .irq = intcs_evt2irq(0x720), -}; - -static struct resource veu1_resources[] = { - [0] = { - .name = "VEU1", - .start = 0xfe924000, - .end = 0xfe9240b7, - .flags = IORESOURCE_MEM, - }, -}; - -static struct platform_device veu1_device = { - .name = "uio_pdrv_genirq", - .id = 2, - .dev = { - .platform_data = &veu1_platform_data, - }, - .resource = veu1_resources, - .num_resources = ARRAY_SIZE(veu1_resources), -}; - -/* VEU2 */ -static struct uio_info veu2_platform_data = { - .name = "VEU2", - .version = "0", - .irq = intcs_evt2irq(0x740), -}; - -static struct resource veu2_resources[] = { - [0] = { - .name = "VEU2", - .start = 0xfe928000, - .end = 0xfe9280b7, - .flags = IORESOURCE_MEM, - }, -}; - -static struct platform_device veu2_device = { - .name = "uio_pdrv_genirq", - .id = 3, - .dev = { - .platform_data = &veu2_platform_data, - }, - .resource = veu2_resources, - .num_resources = ARRAY_SIZE(veu2_resources), -}; - -/* VEU3 */ -static struct uio_info veu3_platform_data = { - .name = "VEU3", - .version = "0", - .irq = intcs_evt2irq(0x760), -}; - -static struct resource veu3_resources[] = { - [0] = { - .name = "VEU3", - .start = 0xfe92c000, - .end = 0xfe92c0b7, - .flags = IORESOURCE_MEM, - }, -}; - -static struct platform_device veu3_device = { - .name = "uio_pdrv_genirq", - .id = 4, - .dev = { - .platform_data = &veu3_platform_data, - }, - .resource = veu3_resources, - .num_resources = ARRAY_SIZE(veu3_resources), -}; - -/* VEU2H */ -static struct uio_info veu2h_platform_data = { - .name = "VEU2H", - .version = "0", - .irq = intcs_evt2irq(0x520), -}; - -static struct resource veu2h_resources[] = { - [0] = { - .name = "VEU2H", - .start = 0xfe93c000, - .end = 0xfe93c27b, - .flags = IORESOURCE_MEM, - }, -}; - -static struct platform_device veu2h_device = { - .name = "uio_pdrv_genirq", - .id = 5, - .dev = { - .platform_data = &veu2h_platform_data, - }, - .resource = veu2h_resources, - .num_resources = ARRAY_SIZE(veu2h_resources), -}; - -/* JPU */ -static struct uio_info jpu_platform_data = { - .name = "JPU", - .version = "0", - .irq = intcs_evt2irq(0x560), -}; - -static struct resource jpu_resources[] = { - [0] = { - .name = "JPU", - .start = 0xfe980000, - .end = 0xfe9902d3, - .flags = IORESOURCE_MEM, - }, -}; - -static struct platform_device jpu_device = { - .name = "uio_pdrv_genirq", - .id = 6, - .dev = { - .platform_data = &jpu_platform_data, - }, - .resource = jpu_resources, - .num_resources = ARRAY_SIZE(jpu_resources), -}; - -/* SPU1 */ -static struct uio_info spu1_platform_data = { - .name = "SPU1", - .version = "0", - .irq = evt2irq(0xfc0), -}; - -static struct resource spu1_resources[] = { - [0] = { - .name = "SPU1", - .start = 0xfe300000, - .end = 0xfe3fffff, - .flags = IORESOURCE_MEM, - }, -}; - -static struct platform_device spu1_device = { - .name = "uio_pdrv_genirq", - .id = 7, - .dev = { - .platform_data = &spu1_platform_data, - }, - .resource = spu1_resources, - .num_resources = ARRAY_SIZE(spu1_resources), -}; - -static struct platform_device *sh7367_early_devices[] __initdata = { - &scif0_device, - &scif1_device, - &scif2_device, - &scif3_device, - &scif4_device, - &scif5_device, - &scif6_device, - &cmt10_device, -}; - -static struct platform_device *sh7367_devices[] __initdata = { - &vpu_device, - &veu0_device, - &veu1_device, - &veu2_device, - &veu3_device, - &veu2h_device, - &jpu_device, - &spu1_device, -}; - -void __init sh7367_add_standard_devices(void) -{ - platform_add_devices(sh7367_early_devices, - ARRAY_SIZE(sh7367_early_devices)); - - platform_add_devices(sh7367_devices, - ARRAY_SIZE(sh7367_devices)); -} - -static void __init sh7367_earlytimer_init(void) -{ - sh7367_clock_init(); - shmobile_earlytimer_init(); -} - -#define SYMSTPCR2 IOMEM(0xe6158048) -#define SYMSTPCR2_CMT1 (1 << 29) - -void __init sh7367_add_early_devices(void) -{ - /* enable clock to CMT1 */ - __raw_writel(__raw_readl(SYMSTPCR2) & ~SYMSTPCR2_CMT1, SYMSTPCR2); - - early_platform_add_devices(sh7367_early_devices, - ARRAY_SIZE(sh7367_early_devices)); - - /* setup early console here as well */ - shmobile_setup_console(); - - /* override timer setup with soc-specific code */ - shmobile_timer.init = sh7367_earlytimer_init; -} -- cgit v0.10.2 From 2864b19142c0f7aa44791499e159f9462c2e64be Mon Sep 17 00:00:00 2001 From: Nobuhiro Iwamatsu Date: Mon, 29 Oct 2012 15:06:00 +0900 Subject: ARM: shmobile: Remove SH7377 support This is old CPU of shmobile, and the machine by which this CPU is used cannot be obtained. Therefore, remove SH7377 support. Signed-off-by: Nobuhiro Iwamatsu Signed-off-by: Simon Horman diff --git a/arch/arm/boot/dts/sh7377.dtsi b/arch/arm/boot/dts/sh7377.dtsi deleted file mode 100644 index 767ee07..0000000 --- a/arch/arm/boot/dts/sh7377.dtsi +++ /dev/null @@ -1,21 +0,0 @@ -/* - * Device Tree Source for the sh7377 SoC - * - * Copyright (C) 2012 Renesas Solutions Corp. - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. - */ - -/include/ "skeleton.dtsi" - -/ { - compatible = "renesas,sh7377"; - - cpus { - cpu@0 { - compatible = "arm,cortex-a8"; - }; - }; -}; diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig index d20dab4..546e40a 100644 --- a/arch/arm/mach-shmobile/Kconfig +++ b/arch/arm/mach-shmobile/Kconfig @@ -2,12 +2,6 @@ if ARCH_SHMOBILE comment "SH-Mobile System Type" -config ARCH_SH7377 - bool "SH-Mobile G4 (SH7377)" - select ARCH_WANT_OPTIONAL_GPIOLIB - select CPU_V7 - select SH_CLK_CPG - config ARCH_SH7372 bool "SH-Mobile AP4 (SH7372)" select ARCH_WANT_OPTIONAL_GPIOLIB diff --git a/arch/arm/mach-shmobile/Makefile b/arch/arm/mach-shmobile/Makefile index 7c07a04..f4fd247 100644 --- a/arch/arm/mach-shmobile/Makefile +++ b/arch/arm/mach-shmobile/Makefile @@ -6,7 +6,6 @@ obj-y := timer.o console.o clock.o # CPU objects -obj-$(CONFIG_ARCH_SH7377) += setup-sh7377.o clock-sh7377.o intc-sh7377.o obj-$(CONFIG_ARCH_SH7372) += setup-sh7372.o clock-sh7372.o intc-sh7372.o obj-$(CONFIG_ARCH_SH73A0) += setup-sh73a0.o clock-sh73a0.o intc-sh73a0.o obj-$(CONFIG_ARCH_R8A7740) += setup-r8a7740.o clock-r8a7740.o intc-r8a7740.o @@ -22,14 +21,12 @@ smp-$(CONFIG_ARCH_EMEV2) += smp-emev2.o # Pinmux setup pfc-y := -pfc-$(CONFIG_ARCH_SH7377) += pfc-sh7377.o pfc-$(CONFIG_ARCH_SH7372) += pfc-sh7372.o pfc-$(CONFIG_ARCH_SH73A0) += pfc-sh73a0.o pfc-$(CONFIG_ARCH_R8A7740) += pfc-r8a7740.o pfc-$(CONFIG_ARCH_R8A7779) += pfc-r8a7779.o # IRQ objects -obj-$(CONFIG_ARCH_SH7377) += entry-intc.o obj-$(CONFIG_ARCH_SH7372) += entry-intc.o obj-$(CONFIG_ARCH_R8A7740) += entry-intc.o diff --git a/arch/arm/mach-shmobile/clock-sh7377.c b/arch/arm/mach-shmobile/clock-sh7377.c deleted file mode 100644 index b8480d1..0000000 --- a/arch/arm/mach-shmobile/clock-sh7377.c +++ /dev/null @@ -1,366 +0,0 @@ -/* - * SH7377 clock framework support - * - * Copyright (C) 2010 Magnus Damm - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#include -#include -#include -#include -#include -#include - -/* SH7377 registers */ -#define RTFRQCR IOMEM(0xe6150000) -#define SYFRQCR IOMEM(0xe6150004) -#define CMFRQCR IOMEM(0xe61500E0) -#define VCLKCR1 IOMEM(0xe6150008) -#define VCLKCR2 IOMEM(0xe615000C) -#define VCLKCR3 IOMEM(0xe615001C) -#define FMSICKCR IOMEM(0xe6150010) -#define FMSOCKCR IOMEM(0xe6150014) -#define FSICKCR IOMEM(0xe6150018) -#define PLLC1CR IOMEM(0xe6150028) -#define PLLC2CR IOMEM(0xe615002C) -#define SUBUSBCKCR IOMEM(0xe6150080) -#define SPUCKCR IOMEM(0xe6150084) -#define MSUCKCR IOMEM(0xe6150088) -#define MVI3CKCR IOMEM(0xe6150090) -#define HDMICKCR IOMEM(0xe6150094) -#define MFCK1CR IOMEM(0xe6150098) -#define MFCK2CR IOMEM(0xe615009C) -#define DSITCKCR IOMEM(0xe6150060) -#define DSIPCKCR IOMEM(0xe6150064) -#define SMSTPCR0 IOMEM(0xe6150130) -#define SMSTPCR1 IOMEM(0xe6150134) -#define SMSTPCR2 IOMEM(0xe6150138) -#define SMSTPCR3 IOMEM(0xe615013C) -#define SMSTPCR4 IOMEM(0xe6150140) - -/* Fixed 32 KHz root clock from EXTALR pin */ -static struct clk r_clk = { - .rate = 32768, -}; - -/* - * 26MHz default rate for the EXTALC1 root input clock. - * If needed, reset this with clk_set_rate() from the platform code. - */ -struct clk sh7377_extalc1_clk = { - .rate = 26666666, -}; - -/* - * 48MHz default rate for the EXTAL2 root input clock. - * If needed, reset this with clk_set_rate() from the platform code. - */ -struct clk sh7377_extal2_clk = { - .rate = 48000000, -}; - -/* A fixed divide-by-2 block */ -static unsigned long div2_recalc(struct clk *clk) -{ - return clk->parent->rate / 2; -} - -static struct sh_clk_ops div2_clk_ops = { - .recalc = div2_recalc, -}; - -/* Divide extalc1 by two */ -static struct clk extalc1_div2_clk = { - .ops = &div2_clk_ops, - .parent = &sh7377_extalc1_clk, -}; - -/* Divide extal2 by two */ -static struct clk extal2_div2_clk = { - .ops = &div2_clk_ops, - .parent = &sh7377_extal2_clk, -}; - -/* Divide extal2 by four */ -static struct clk extal2_div4_clk = { - .ops = &div2_clk_ops, - .parent = &extal2_div2_clk, -}; - -/* PLLC1 */ -static unsigned long pllc1_recalc(struct clk *clk) -{ - unsigned long mult = 1; - - if (__raw_readl(PLLC1CR) & (1 << 14)) - mult = (((__raw_readl(RTFRQCR) >> 24) & 0x3f) + 1) * 2; - - return clk->parent->rate * mult; -} - -static struct sh_clk_ops pllc1_clk_ops = { - .recalc = pllc1_recalc, -}; - -static struct clk pllc1_clk = { - .ops = &pllc1_clk_ops, - .flags = CLK_ENABLE_ON_INIT, - .parent = &extalc1_div2_clk, -}; - -/* Divide PLLC1 by two */ -static struct clk pllc1_div2_clk = { - .ops = &div2_clk_ops, - .parent = &pllc1_clk, -}; - -/* PLLC2 */ -static unsigned long pllc2_recalc(struct clk *clk) -{ - unsigned long mult = 1; - - if (__raw_readl(PLLC2CR) & (1 << 31)) - mult = (((__raw_readl(PLLC2CR) >> 24) & 0x3f) + 1) * 2; - - return clk->parent->rate * mult; -} - -static struct sh_clk_ops pllc2_clk_ops = { - .recalc = pllc2_recalc, -}; - -static struct clk pllc2_clk = { - .ops = &pllc2_clk_ops, - .flags = CLK_ENABLE_ON_INIT, - .parent = &extalc1_div2_clk, -}; - -static struct clk *main_clks[] = { - &r_clk, - &sh7377_extalc1_clk, - &sh7377_extal2_clk, - &extalc1_div2_clk, - &extal2_div2_clk, - &extal2_div4_clk, - &pllc1_clk, - &pllc1_div2_clk, - &pllc2_clk, -}; - -static void div4_kick(struct clk *clk) -{ - unsigned long value; - - /* set KICK bit in SYFRQCR to update hardware setting */ - value = __raw_readl(SYFRQCR); - value |= (1 << 31); - __raw_writel(value, SYFRQCR); -} - -static int divisors[] = { 2, 3, 4, 6, 8, 12, 16, 18, - 24, 32, 36, 48, 0, 72, 96, 0 }; - -static struct clk_div_mult_table div4_div_mult_table = { - .divisors = divisors, - .nr_divisors = ARRAY_SIZE(divisors), -}; - -static struct clk_div4_table div4_table = { - .div_mult_table = &div4_div_mult_table, - .kick = div4_kick, -}; - -enum { DIV4_I, DIV4_ZG, DIV4_B, DIV4_M1, DIV4_CSIR, - DIV4_ZTR, DIV4_ZT, DIV4_Z, DIV4_HP, - DIV4_ZS, DIV4_ZB, DIV4_ZB3, DIV4_CP, DIV4_NR }; - -#define DIV4(_reg, _bit, _mask, _flags) \ - SH_CLK_DIV4(&pllc1_clk, _reg, _bit, _mask, _flags) - -static struct clk div4_clks[DIV4_NR] = { - [DIV4_I] = DIV4(RTFRQCR, 20, 0x6fff, CLK_ENABLE_ON_INIT), - [DIV4_ZG] = DIV4(RTFRQCR, 16, 0x6fff, CLK_ENABLE_ON_INIT), - [DIV4_B] = DIV4(RTFRQCR, 8, 0x6fff, CLK_ENABLE_ON_INIT), - [DIV4_M1] = DIV4(RTFRQCR, 4, 0x6fff, CLK_ENABLE_ON_INIT), - [DIV4_CSIR] = DIV4(RTFRQCR, 0, 0x6fff, 0), - [DIV4_ZTR] = DIV4(SYFRQCR, 20, 0x6fff, 0), - [DIV4_ZT] = DIV4(SYFRQCR, 16, 0x6fff, 0), - [DIV4_Z] = DIV4(SYFRQCR, 12, 0x6fff, 0), - [DIV4_HP] = DIV4(SYFRQCR, 4, 0x6fff, 0), - [DIV4_ZS] = DIV4(CMFRQCR, 12, 0x6fff, 0), - [DIV4_ZB] = DIV4(CMFRQCR, 8, 0x6fff, 0), - [DIV4_ZB3] = DIV4(CMFRQCR, 4, 0x6fff, 0), - [DIV4_CP] = DIV4(CMFRQCR, 0, 0x6fff, 0), -}; - -enum { DIV6_VCK1, DIV6_VCK2, DIV6_VCK3, DIV6_FMSI, DIV6_FMSO, - DIV6_FSI, DIV6_SUB, DIV6_SPU, DIV6_MSU, DIV6_MVI3, DIV6_HDMI, - DIV6_MF1, DIV6_MF2, DIV6_DSIT, DIV6_DSIP, - DIV6_NR }; - -static struct clk div6_clks[] = { - [DIV6_VCK1] = SH_CLK_DIV6(&pllc1_div2_clk, VCLKCR1, 0), - [DIV6_VCK2] = SH_CLK_DIV6(&pllc1_div2_clk, VCLKCR2, 0), - [DIV6_VCK3] = SH_CLK_DIV6(&pllc1_div2_clk, VCLKCR3, 0), - [DIV6_FMSI] = SH_CLK_DIV6(&pllc1_div2_clk, FMSICKCR, 0), - [DIV6_FMSO] = SH_CLK_DIV6(&pllc1_div2_clk, FMSOCKCR, 0), - [DIV6_FSI] = SH_CLK_DIV6(&pllc1_div2_clk, FSICKCR, 0), - [DIV6_SUB] = SH_CLK_DIV6(&sh7377_extal2_clk, SUBUSBCKCR, 0), - [DIV6_SPU] = SH_CLK_DIV6(&pllc1_div2_clk, SPUCKCR, 0), - [DIV6_MSU] = SH_CLK_DIV6(&pllc1_div2_clk, MSUCKCR, 0), - [DIV6_MVI3] = SH_CLK_DIV6(&pllc1_div2_clk, MVI3CKCR, 0), - [DIV6_HDMI] = SH_CLK_DIV6(&pllc1_div2_clk, HDMICKCR, 0), - [DIV6_MF1] = SH_CLK_DIV6(&pllc1_div2_clk, MFCK1CR, 0), - [DIV6_MF2] = SH_CLK_DIV6(&pllc1_div2_clk, MFCK2CR, 0), - [DIV6_DSIT] = SH_CLK_DIV6(&pllc1_div2_clk, DSITCKCR, 0), - [DIV6_DSIP] = SH_CLK_DIV6(&pllc1_div2_clk, DSIPCKCR, 0), -}; - -enum { MSTP001, - MSTP131, MSTP130, MSTP129, MSTP128, MSTP116, MSTP106, MSTP101, - MSTP223, MSTP207, MSTP206, MSTP204, MSTP203, MSTP202, MSTP201, MSTP200, - MSTP331, MSTP329, MSTP325, MSTP323, MSTP322, - MSTP315, MSTP314, MSTP313, - MSTP403, - MSTP_NR }; - -#define MSTP(_parent, _reg, _bit, _flags) \ - SH_CLK_MSTP32(_parent, _reg, _bit, _flags) - -static struct clk mstp_clks[] = { - [MSTP001] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR0, 1, 0), /* IIC2 */ - [MSTP131] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 31, 0), /* VEU3 */ - [MSTP130] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 30, 0), /* VEU2 */ - [MSTP129] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 29, 0), /* VEU1 */ - [MSTP128] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 28, 0), /* VEU0 */ - [MSTP116] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR1, 16, 0), /* IIC0 */ - [MSTP106] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 6, 0), /* JPU */ - [MSTP101] = MSTP(&div4_clks[DIV4_M1], SMSTPCR1, 1, 0), /* VPU */ - [MSTP223] = MSTP(&div6_clks[DIV6_SPU], SMSTPCR2, 23, 0), /* SPU2 */ - [MSTP207] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 7, 0), /* SCIFA5 */ - [MSTP206] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 6, 0), /* SCIFB */ - [MSTP204] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 4, 0), /* SCIFA0 */ - [MSTP203] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 3, 0), /* SCIFA1 */ - [MSTP202] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 2, 0), /* SCIFA2 */ - [MSTP201] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 1, 0), /* SCIFA3 */ - [MSTP200] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 0, 0), /* SCIFA4 */ - [MSTP331] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR3, 31, 0), /* SCIFA6 */ - [MSTP329] = MSTP(&r_clk, SMSTPCR3, 29, 0), /* CMT10 */ - [MSTP325] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR3, 25, 0), /* IRDA */ - [MSTP323] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR3, 23, 0), /* IIC1 */ - [MSTP322] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR3, 22, 0), /* USB0 */ - [MSTP315] = MSTP(&div4_clks[DIV4_HP], SMSTPCR3, 15, 0), /* FLCTL */ - [MSTP314] = MSTP(&div4_clks[DIV4_HP], SMSTPCR3, 14, 0), /* SDHI0 */ - [MSTP313] = MSTP(&div4_clks[DIV4_HP], SMSTPCR3, 13, 0), /* SDHI1 */ - [MSTP403] = MSTP(&r_clk, SMSTPCR4, 3, 0), /* KEYSC */ -}; - -static struct clk_lookup lookups[] = { - /* main clocks */ - CLKDEV_CON_ID("r_clk", &r_clk), - CLKDEV_CON_ID("extalc1", &sh7377_extalc1_clk), - CLKDEV_CON_ID("extal2", &sh7377_extal2_clk), - CLKDEV_CON_ID("extalc1_div2_clk", &extalc1_div2_clk), - CLKDEV_CON_ID("extal2_div2_clk", &extal2_div2_clk), - CLKDEV_CON_ID("extal2_div4_clk", &extal2_div4_clk), - CLKDEV_CON_ID("pllc1_clk", &pllc1_clk), - CLKDEV_CON_ID("pllc1_div2_clk", &pllc1_div2_clk), - CLKDEV_CON_ID("pllc2_clk", &pllc2_clk), - - /* DIV4 clocks */ - CLKDEV_CON_ID("i_clk", &div4_clks[DIV4_I]), - CLKDEV_CON_ID("zg_clk", &div4_clks[DIV4_ZG]), - CLKDEV_CON_ID("b_clk", &div4_clks[DIV4_B]), - CLKDEV_CON_ID("m1_clk", &div4_clks[DIV4_M1]), - CLKDEV_CON_ID("csir_clk", &div4_clks[DIV4_CSIR]), - CLKDEV_CON_ID("ztr_clk", &div4_clks[DIV4_ZTR]), - CLKDEV_CON_ID("zt_clk", &div4_clks[DIV4_ZT]), - CLKDEV_CON_ID("z_clk", &div4_clks[DIV4_Z]), - CLKDEV_CON_ID("hp_clk", &div4_clks[DIV4_HP]), - CLKDEV_CON_ID("zs_clk", &div4_clks[DIV4_ZS]), - CLKDEV_CON_ID("zb_clk", &div4_clks[DIV4_ZB]), - CLKDEV_CON_ID("zb3_clk", &div4_clks[DIV4_ZB3]), - CLKDEV_CON_ID("cp_clk", &div4_clks[DIV4_CP]), - - /* DIV6 clocks */ - CLKDEV_CON_ID("vck1_clk", &div6_clks[DIV6_VCK1]), - CLKDEV_CON_ID("vck2_clk", &div6_clks[DIV6_VCK2]), - CLKDEV_CON_ID("vck3_clk", &div6_clks[DIV6_VCK3]), - CLKDEV_CON_ID("fmsi_clk", &div6_clks[DIV6_FMSI]), - CLKDEV_CON_ID("fmso_clk", &div6_clks[DIV6_FMSO]), - CLKDEV_CON_ID("fsi_clk", &div6_clks[DIV6_FSI]), - CLKDEV_CON_ID("sub_clk", &div6_clks[DIV6_SUB]), - CLKDEV_CON_ID("spu_clk", &div6_clks[DIV6_SPU]), - CLKDEV_CON_ID("msu_clk", &div6_clks[DIV6_MSU]), - CLKDEV_CON_ID("mvi3_clk", &div6_clks[DIV6_MVI3]), - CLKDEV_CON_ID("hdmi_clk", &div6_clks[DIV6_HDMI]), - CLKDEV_CON_ID("mf1_clk", &div6_clks[DIV6_MF1]), - CLKDEV_CON_ID("mf2_clk", &div6_clks[DIV6_MF2]), - CLKDEV_CON_ID("dsit_clk", &div6_clks[DIV6_DSIT]), - CLKDEV_CON_ID("dsip_clk", &div6_clks[DIV6_DSIP]), - - /* MSTP32 clocks */ - CLKDEV_DEV_ID("i2c-sh_mobile.2", &mstp_clks[MSTP001]), /* IIC2 */ - CLKDEV_DEV_ID("uio_pdrv_genirq.4", &mstp_clks[MSTP131]), /* VEU3 */ - CLKDEV_DEV_ID("uio_pdrv_genirq.3", &mstp_clks[MSTP130]), /* VEU2 */ - CLKDEV_DEV_ID("uio_pdrv_genirq.2", &mstp_clks[MSTP129]), /* VEU1 */ - CLKDEV_DEV_ID("uio_pdrv_genirq.1", &mstp_clks[MSTP128]), /* VEU0 */ - CLKDEV_DEV_ID("i2c-sh_mobile.0", &mstp_clks[MSTP116]), /* IIC0 */ - CLKDEV_DEV_ID("uio_pdrv_genirq.5", &mstp_clks[MSTP106]), /* JPU */ - CLKDEV_DEV_ID("uio_pdrv_genirq.0", &mstp_clks[MSTP101]), /* VPU */ - CLKDEV_DEV_ID("uio_pdrv_genirq.6", &mstp_clks[MSTP223]), /* SPU2DSP0 */ - CLKDEV_DEV_ID("uio_pdrv_genirq.7", &mstp_clks[MSTP223]), /* SPU2DSP1 */ - CLKDEV_DEV_ID("sh-sci.5", &mstp_clks[MSTP207]), /* SCIFA5 */ - CLKDEV_DEV_ID("sh-sci.7", &mstp_clks[MSTP206]), /* SCIFB */ - CLKDEV_DEV_ID("sh-sci.0", &mstp_clks[MSTP204]), /* SCIFA0 */ - CLKDEV_DEV_ID("sh-sci.1", &mstp_clks[MSTP203]), /* SCIFA1 */ - CLKDEV_DEV_ID("sh-sci.2", &mstp_clks[MSTP202]), /* SCIFA2 */ - CLKDEV_DEV_ID("sh-sci.3", &mstp_clks[MSTP201]), /* SCIFA3 */ - CLKDEV_DEV_ID("sh-sci.4", &mstp_clks[MSTP200]), /* SCIFA4 */ - CLKDEV_DEV_ID("sh-sci.6", &mstp_clks[MSTP331]), /* SCIFA6 */ - CLKDEV_DEV_ID("sh_cmt.10", &mstp_clks[MSTP329]), /* CMT10 */ - CLKDEV_DEV_ID("sh_irda", &mstp_clks[MSTP325]), /* IRDA */ - CLKDEV_DEV_ID("i2c-sh_mobile.1", &mstp_clks[MSTP323]), /* IIC1 */ - CLKDEV_DEV_ID("r8a66597_hcd.0", &mstp_clks[MSTP322]), /* USBHS */ - CLKDEV_DEV_ID("r8a66597_udc.0", &mstp_clks[MSTP322]), /* USBHS */ - CLKDEV_DEV_ID("sh_flctl", &mstp_clks[MSTP315]), /* FLCTL */ - CLKDEV_DEV_ID("sh_mobile_sdhi.0", &mstp_clks[MSTP314]), /* SDHI0 */ - CLKDEV_DEV_ID("sh_mobile_sdhi.1", &mstp_clks[MSTP313]), /* SDHI1 */ - CLKDEV_DEV_ID("sh_keysc.0", &mstp_clks[MSTP403]), /* KEYSC */ -}; - -void __init sh7377_clock_init(void) -{ - int k, ret = 0; - - for (k = 0; !ret && (k < ARRAY_SIZE(main_clks)); k++) - ret = clk_register(main_clks[k]); - - if (!ret) - ret = sh_clk_div4_register(div4_clks, DIV4_NR, &div4_table); - - if (!ret) - ret = sh_clk_div6_register(div6_clks, DIV6_NR); - - if (!ret) - ret = sh_clk_mstp_register(mstp_clks, MSTP_NR); - - clkdev_add_table(lookups, ARRAY_SIZE(lookups)); - - if (!ret) - shmobile_clk_init(); - else - panic("failed to setup sh7377 clocks\n"); -} diff --git a/arch/arm/mach-shmobile/include/mach/common.h b/arch/arm/mach-shmobile/include/mach/common.h index f96fc29..dfeca79 100644 --- a/arch/arm/mach-shmobile/include/mach/common.h +++ b/arch/arm/mach-shmobile/include/mach/common.h @@ -18,15 +18,6 @@ extern int shmobile_enter_wfi(struct cpuidle_device *dev, struct cpuidle_driver *drv, int index); extern void shmobile_cpuidle_set_driver(struct cpuidle_driver *drv); -extern void sh7377_init_irq(void); -extern void sh7377_map_io(void); -extern void sh7377_add_early_devices(void); -extern void sh7377_add_standard_devices(void); -extern void sh7377_clock_init(void); -extern void sh7377_pinmux_init(void); -extern struct clk sh7377_extalc1_clk; -extern struct clk sh7377_extal2_clk; - extern void sh7372_init_irq(void); extern void sh7372_map_io(void); extern void sh7372_add_early_devices(void); diff --git a/arch/arm/mach-shmobile/include/mach/sh7377.h b/arch/arm/mach-shmobile/include/mach/sh7377.h deleted file mode 100644 index f580e22..0000000 --- a/arch/arm/mach-shmobile/include/mach/sh7377.h +++ /dev/null @@ -1,360 +0,0 @@ -#ifndef __ASM_SH7377_H__ -#define __ASM_SH7377_H__ - -/* Pin Function Controller: - * GPIO_FN_xx - GPIO used to select pin function - * GPIO_PORTxx - GPIO mapped to real I/O pin on CPU - */ -enum { - /* 55-1 -> 55-5 (GPIO) */ - GPIO_PORT0, GPIO_PORT1, GPIO_PORT2, GPIO_PORT3, GPIO_PORT4, - GPIO_PORT5, GPIO_PORT6, GPIO_PORT7, GPIO_PORT8, GPIO_PORT9, - - GPIO_PORT10, GPIO_PORT11, GPIO_PORT12, GPIO_PORT13, GPIO_PORT14, - GPIO_PORT15, GPIO_PORT16, GPIO_PORT17, GPIO_PORT18, GPIO_PORT19, - - GPIO_PORT20, GPIO_PORT21, GPIO_PORT22, GPIO_PORT23, GPIO_PORT24, - GPIO_PORT25, GPIO_PORT26, GPIO_PORT27, GPIO_PORT28, GPIO_PORT29, - - GPIO_PORT30, GPIO_PORT31, GPIO_PORT32, GPIO_PORT33, GPIO_PORT34, - GPIO_PORT35, GPIO_PORT36, GPIO_PORT37, GPIO_PORT38, GPIO_PORT39, - - GPIO_PORT40, GPIO_PORT41, GPIO_PORT42, GPIO_PORT43, GPIO_PORT44, - GPIO_PORT45, GPIO_PORT46, GPIO_PORT47, GPIO_PORT48, GPIO_PORT49, - - GPIO_PORT50, GPIO_PORT51, GPIO_PORT52, GPIO_PORT53, GPIO_PORT54, - GPIO_PORT55, GPIO_PORT56, GPIO_PORT57, GPIO_PORT58, GPIO_PORT59, - - GPIO_PORT60, GPIO_PORT61, GPIO_PORT62, GPIO_PORT63, GPIO_PORT64, - GPIO_PORT65, GPIO_PORT66, GPIO_PORT67, GPIO_PORT68, GPIO_PORT69, - - GPIO_PORT70, GPIO_PORT71, GPIO_PORT72, GPIO_PORT73, GPIO_PORT74, - GPIO_PORT75, GPIO_PORT76, GPIO_PORT77, GPIO_PORT78, GPIO_PORT79, - - GPIO_PORT80, GPIO_PORT81, GPIO_PORT82, GPIO_PORT83, GPIO_PORT84, - GPIO_PORT85, GPIO_PORT86, GPIO_PORT87, GPIO_PORT88, GPIO_PORT89, - - GPIO_PORT90, GPIO_PORT91, GPIO_PORT92, GPIO_PORT93, GPIO_PORT94, - GPIO_PORT95, GPIO_PORT96, GPIO_PORT97, GPIO_PORT98, GPIO_PORT99, - - GPIO_PORT100, GPIO_PORT101, GPIO_PORT102, GPIO_PORT103, GPIO_PORT104, - GPIO_PORT105, GPIO_PORT106, GPIO_PORT107, GPIO_PORT108, GPIO_PORT109, - - GPIO_PORT110, GPIO_PORT111, GPIO_PORT112, GPIO_PORT113, GPIO_PORT114, - GPIO_PORT115, GPIO_PORT116, GPIO_PORT117, GPIO_PORT118, - - GPIO_PORT128, GPIO_PORT129, - - GPIO_PORT130, GPIO_PORT131, GPIO_PORT132, GPIO_PORT133, GPIO_PORT134, - GPIO_PORT135, GPIO_PORT136, GPIO_PORT137, GPIO_PORT138, GPIO_PORT139, - - GPIO_PORT140, GPIO_PORT141, GPIO_PORT142, GPIO_PORT143, GPIO_PORT144, - GPIO_PORT145, GPIO_PORT146, GPIO_PORT147, GPIO_PORT148, GPIO_PORT149, - - GPIO_PORT150, GPIO_PORT151, GPIO_PORT152, GPIO_PORT153, GPIO_PORT154, - GPIO_PORT155, GPIO_PORT156, GPIO_PORT157, GPIO_PORT158, GPIO_PORT159, - - GPIO_PORT160, GPIO_PORT161, GPIO_PORT162, GPIO_PORT163, GPIO_PORT164, - - GPIO_PORT192, GPIO_PORT193, GPIO_PORT194, - GPIO_PORT195, GPIO_PORT196, GPIO_PORT197, GPIO_PORT198, GPIO_PORT199, - - GPIO_PORT200, GPIO_PORT201, GPIO_PORT202, GPIO_PORT203, GPIO_PORT204, - GPIO_PORT205, GPIO_PORT206, GPIO_PORT207, GPIO_PORT208, GPIO_PORT209, - - GPIO_PORT210, GPIO_PORT211, GPIO_PORT212, GPIO_PORT213, GPIO_PORT214, - GPIO_PORT215, GPIO_PORT216, GPIO_PORT217, GPIO_PORT218, GPIO_PORT219, - - GPIO_PORT220, GPIO_PORT221, GPIO_PORT222, GPIO_PORT223, GPIO_PORT224, - GPIO_PORT225, GPIO_PORT226, GPIO_PORT227, GPIO_PORT228, GPIO_PORT229, - - GPIO_PORT230, GPIO_PORT231, GPIO_PORT232, GPIO_PORT233, GPIO_PORT234, - GPIO_PORT235, GPIO_PORT236, GPIO_PORT237, GPIO_PORT238, GPIO_PORT239, - - GPIO_PORT240, GPIO_PORT241, GPIO_PORT242, GPIO_PORT243, GPIO_PORT244, - GPIO_PORT245, GPIO_PORT246, GPIO_PORT247, GPIO_PORT248, GPIO_PORT249, - - GPIO_PORT250, GPIO_PORT251, GPIO_PORT252, GPIO_PORT253, GPIO_PORT254, - GPIO_PORT255, GPIO_PORT256, GPIO_PORT257, GPIO_PORT258, GPIO_PORT259, - - GPIO_PORT260, GPIO_PORT261, GPIO_PORT262, GPIO_PORT263, GPIO_PORT264, - - /* Special Pull-up / Pull-down Functions */ - GPIO_FN_PORT66_KEYIN0_PU, GPIO_FN_PORT67_KEYIN1_PU, - GPIO_FN_PORT68_KEYIN2_PU, GPIO_FN_PORT69_KEYIN3_PU, - GPIO_FN_PORT70_KEYIN4_PU, GPIO_FN_PORT71_KEYIN5_PU, - GPIO_FN_PORT72_KEYIN6_PU, - - /* 55-1 (FN) */ - GPIO_FN_VBUS_0, - GPIO_FN_CPORT0, - GPIO_FN_CPORT1, - GPIO_FN_CPORT2, - GPIO_FN_CPORT3, - GPIO_FN_CPORT4, - GPIO_FN_CPORT5, - GPIO_FN_CPORT6, - GPIO_FN_CPORT7, - GPIO_FN_CPORT8, - GPIO_FN_CPORT9, - GPIO_FN_CPORT10, - GPIO_FN_CPORT11, GPIO_FN_SIN2, - GPIO_FN_CPORT12, GPIO_FN_XCTS2, - GPIO_FN_CPORT13, GPIO_FN_RFSPO4, - GPIO_FN_CPORT14, GPIO_FN_RFSPO5, - GPIO_FN_CPORT15, GPIO_FN_SCIFA0_SCK, GPIO_FN_GPS_AGC2, - GPIO_FN_CPORT16, GPIO_FN_SCIFA0_TXD, GPIO_FN_GPS_AGC3, - GPIO_FN_CPORT17_IC_OE, GPIO_FN_SOUT2, - GPIO_FN_CPORT18, GPIO_FN_XRTS2, GPIO_FN_PORT19_VIO_CKO2, - GPIO_FN_CPORT19_MPORT1, - GPIO_FN_CPORT20, GPIO_FN_RFSPO6, - GPIO_FN_CPORT21, GPIO_FN_STATUS0, - GPIO_FN_CPORT22, GPIO_FN_STATUS1, - GPIO_FN_CPORT23, GPIO_FN_STATUS2, GPIO_FN_RFSPO7, - GPIO_FN_B_SYNLD1, - GPIO_FN_B_SYNLD2, GPIO_FN_SYSENMSK, - GPIO_FN_XMAINPS, - GPIO_FN_XDIVPS, - GPIO_FN_XIDRST, - GPIO_FN_IDCLK, GPIO_FN_IC_DP, - GPIO_FN_IDIO, GPIO_FN_IC_DM, - GPIO_FN_SOUT1, GPIO_FN_SCIFA4_TXD, GPIO_FN_M02_BERDAT, - GPIO_FN_SIN1, GPIO_FN_SCIFA4_RXD, GPIO_FN_XWUP, - GPIO_FN_XRTS1, GPIO_FN_SCIFA4_RTS, GPIO_FN_M03_BERCLK, - GPIO_FN_XCTS1, GPIO_FN_SCIFA4_CTS, - GPIO_FN_PCMCLKO, - GPIO_FN_SYNC8KO, - - /* 55-2 (FN) */ - GPIO_FN_DNPCM_A, - GPIO_FN_UPPCM_A, - GPIO_FN_VACK, - GPIO_FN_XTALB1L, - GPIO_FN_GPS_AGC1, GPIO_FN_SCIFA0_RTS, - GPIO_FN_GPS_AGC4, GPIO_FN_SCIFA0_RXD, - GPIO_FN_GPS_PWRDOWN, GPIO_FN_SCIFA0_CTS, - GPIO_FN_GPS_IM, - GPIO_FN_GPS_IS, - GPIO_FN_GPS_QM, - GPIO_FN_GPS_QS, - GPIO_FN_FMSOCK, GPIO_FN_PORT49_IRDA_OUT, GPIO_FN_PORT49_IROUT, - GPIO_FN_FMSOOLR, GPIO_FN_BBIF2_TSYNC2, GPIO_FN_TPU2TO2, GPIO_FN_IPORT3, - GPIO_FN_FMSIOLR, - GPIO_FN_FMSOOBT, GPIO_FN_BBIF2_TSCK2, GPIO_FN_TPU2TO3, GPIO_FN_OPORT1, - GPIO_FN_FMSIOBT, - GPIO_FN_FMSOSLD, GPIO_FN_BBIF2_TXD2, GPIO_FN_OPORT2, - GPIO_FN_FMSOILR, GPIO_FN_PORT53_IRDA_IN, GPIO_FN_TPU3TO3, - GPIO_FN_OPORT3, GPIO_FN_FMSIILR, - GPIO_FN_FMSOIBT, GPIO_FN_PORT54_IRDA_FIRSEL, GPIO_FN_TPU3TO2, - GPIO_FN_FMSIIBT, - GPIO_FN_FMSISLD, GPIO_FN_MFG0_OUT1, GPIO_FN_TPU0TO0, - GPIO_FN_A0_EA0, GPIO_FN_BS, - GPIO_FN_A12_EA12, GPIO_FN_PORT58_VIO_CKOR, GPIO_FN_TPU4TO2, - GPIO_FN_A13_EA13, GPIO_FN_PORT59_IROUT, GPIO_FN_MFG0_OUT2, - GPIO_FN_TPU0TO1, - GPIO_FN_A14_EA14, GPIO_FN_PORT60_KEYOUT5, - GPIO_FN_A15_EA15, GPIO_FN_PORT61_KEYOUT4, - GPIO_FN_A16_EA16, GPIO_FN_PORT62_KEYOUT3, GPIO_FN_MSIOF0_SS1, - GPIO_FN_A17_EA17, GPIO_FN_PORT63_KEYOUT2, GPIO_FN_MSIOF0_TSYNC, - GPIO_FN_A18_EA18, GPIO_FN_PORT64_KEYOUT1, GPIO_FN_MSIOF0_TSCK, - GPIO_FN_A19_EA19, GPIO_FN_PORT65_KEYOUT0, GPIO_FN_MSIOF0_TXD, - GPIO_FN_A20_EA20, GPIO_FN_PORT66_KEYIN0, GPIO_FN_MSIOF0_RSCK, - GPIO_FN_A21_EA21, GPIO_FN_PORT67_KEYIN1, GPIO_FN_MSIOF0_RSYNC, - GPIO_FN_A22_EA22, GPIO_FN_PORT68_KEYIN2, GPIO_FN_MSIOF0_MCK0, - GPIO_FN_A23_EA23, GPIO_FN_PORT69_KEYIN3, GPIO_FN_MSIOF0_MCK1, - GPIO_FN_A24_EA24, GPIO_FN_PORT70_KEYIN4, GPIO_FN_MSIOF0_RXD, - GPIO_FN_A25_EA25, GPIO_FN_PORT71_KEYIN5, GPIO_FN_MSIOF0_SS2, - GPIO_FN_A26, GPIO_FN_PORT72_KEYIN6, - GPIO_FN_D0_ED0_NAF0, - GPIO_FN_D1_ED1_NAF1, - GPIO_FN_D2_ED2_NAF2, - GPIO_FN_D3_ED3_NAF3, - GPIO_FN_D4_ED4_NAF4, - GPIO_FN_D5_ED5_NAF5, - GPIO_FN_D6_ED6_NAF6, - GPIO_FN_D7_ED7_NAF7, - GPIO_FN_D8_ED8_NAF8, - GPIO_FN_D9_ED9_NAF9, - GPIO_FN_D10_ED10_NAF10, - GPIO_FN_D11_ED11_NAF11, - GPIO_FN_D12_ED12_NAF12, - GPIO_FN_D13_ED13_NAF13, - GPIO_FN_D14_ED14_NAF14, - GPIO_FN_D15_ED15_NAF15, - GPIO_FN_CS4, - GPIO_FN_CS5A, GPIO_FN_FMSICK, - GPIO_FN_CS5B, GPIO_FN_FCE1, - - /* 55-3 (FN) */ - GPIO_FN_CS6B, GPIO_FN_XCS2, GPIO_FN_CS6A, GPIO_FN_DACK0, - GPIO_FN_FCE0, - GPIO_FN_WAIT, GPIO_FN_DREQ0, - GPIO_FN_RD_XRD, - GPIO_FN_WE0_XWR0_FWE, - GPIO_FN_WE1_XWR1, - GPIO_FN_FRB, - GPIO_FN_CKO, - GPIO_FN_NBRSTOUT, - GPIO_FN_NBRST, - GPIO_FN_GPS_EPPSIN, - GPIO_FN_LATCHPULSE, - GPIO_FN_LTESIGNAL, - GPIO_FN_LEGACYSTATE, - GPIO_FN_TCKON, - GPIO_FN_VIO_VD, GPIO_FN_PORT128_KEYOUT0, GPIO_FN_IPORT0, - GPIO_FN_VIO_HD, GPIO_FN_PORT129_KEYOUT1, GPIO_FN_IPORT1, - GPIO_FN_VIO_D0, GPIO_FN_PORT130_KEYOUT2, GPIO_FN_PORT130_MSIOF2_RXD, - GPIO_FN_VIO_D1, GPIO_FN_PORT131_KEYOUT3, GPIO_FN_PORT131_MSIOF2_SS1, - GPIO_FN_VIO_D2, GPIO_FN_PORT132_KEYOUT4, GPIO_FN_PORT132_MSIOF2_SS2, - GPIO_FN_VIO_D3, GPIO_FN_PORT133_KEYOUT5, GPIO_FN_PORT133_MSIOF2_TSYNC, - GPIO_FN_VIO_D4, GPIO_FN_PORT134_KEYIN0, GPIO_FN_PORT134_MSIOF2_TXD, - GPIO_FN_VIO_D5, GPIO_FN_PORT135_KEYIN1, GPIO_FN_PORT135_MSIOF2_TSCK, - GPIO_FN_VIO_D6, GPIO_FN_PORT136_KEYIN2, - GPIO_FN_VIO_D7, GPIO_FN_PORT137_KEYIN3, - GPIO_FN_VIO_D8, GPIO_FN_M9_SLCD_A01, GPIO_FN_PORT138_FSIAOMC, - GPIO_FN_VIO_D9, GPIO_FN_M10_SLCD_CK1, GPIO_FN_PORT139_FSIAOLR, - GPIO_FN_VIO_D10, GPIO_FN_M11_SLCD_SO1, GPIO_FN_TPU0TO2, - GPIO_FN_PORT140_FSIAOBT, - GPIO_FN_VIO_D11, GPIO_FN_M12_SLCD_CE1, GPIO_FN_TPU0TO3, - GPIO_FN_PORT141_FSIAOSLD, - GPIO_FN_VIO_D12, GPIO_FN_M13_BSW, GPIO_FN_PORT142_FSIACK, - GPIO_FN_VIO_D13, GPIO_FN_M14_GSW, GPIO_FN_PORT143_FSIAILR, - GPIO_FN_VIO_D14, GPIO_FN_M15_RSW, GPIO_FN_PORT144_FSIAIBT, - GPIO_FN_VIO_D15, GPIO_FN_TPU1TO3, GPIO_FN_PORT145_FSIAISLD, - GPIO_FN_VIO_CLK, GPIO_FN_PORT146_KEYIN4, GPIO_FN_IPORT2, - GPIO_FN_VIO_FIELD, GPIO_FN_PORT147_KEYIN5, - GPIO_FN_VIO_CKO, GPIO_FN_PORT148_KEYIN6, - GPIO_FN_A27, GPIO_FN_RDWR_XWE, GPIO_FN_MFG0_IN1, - GPIO_FN_MFG0_IN2, - GPIO_FN_TS_SPSYNC3, GPIO_FN_MSIOF2_RSCK, - GPIO_FN_TS_SDAT3, GPIO_FN_MSIOF2_RSYNC, - GPIO_FN_TPU1TO2, GPIO_FN_TS_SDEN3, GPIO_FN_PORT153_MSIOF2_SS1, - GPIO_FN_SOUT3, GPIO_FN_SCIFA2_TXD1, GPIO_FN_MSIOF2_MCK0, - GPIO_FN_SIN3, GPIO_FN_SCIFA2_RXD1, GPIO_FN_MSIOF2_MCK1, - GPIO_FN_XRTS3, GPIO_FN_SCIFA2_RTS1, GPIO_FN_PORT156_MSIOF2_SS2, - GPIO_FN_XCTS3, GPIO_FN_SCIFA2_CTS1, GPIO_FN_PORT157_MSIOF2_RXD, - - /* 55-4 (FN) */ - GPIO_FN_DINT, GPIO_FN_SCIFA2_SCK1, GPIO_FN_TS_SCK3, - GPIO_FN_PORT159_SCIFB_SCK, GPIO_FN_PORT159_SCIFA5_SCK, GPIO_FN_NMI, - GPIO_FN_PORT160_SCIFB_TXD, GPIO_FN_PORT160_SCIFA5_TXD, GPIO_FN_SOUT0, - GPIO_FN_PORT161_SCIFB_CTS, GPIO_FN_PORT161_SCIFA5_CTS, GPIO_FN_XCTS0, - GPIO_FN_MFG3_IN2, - GPIO_FN_PORT162_SCIFB_RXD, GPIO_FN_PORT162_SCIFA5_RXD, GPIO_FN_SIN0, - GPIO_FN_MFG3_IN1, - GPIO_FN_PORT163_SCIFB_RTS, GPIO_FN_PORT163_SCIFA5_RTS, GPIO_FN_XRTS0, - GPIO_FN_MFG3_OUT1, - GPIO_FN_TPU3TO0, - GPIO_FN_LCDD0, GPIO_FN_PORT192_KEYOUT0, GPIO_FN_EXT_CKI, - GPIO_FN_LCDD1, GPIO_FN_PORT193_KEYOUT1, GPIO_FN_PORT193_SCIFA5_CTS, - GPIO_FN_BBIF2_TSYNC1, - GPIO_FN_LCDD2, GPIO_FN_PORT194_KEYOUT2, GPIO_FN_PORT194_SCIFA5_RTS, - GPIO_FN_BBIF2_TSCK1, - GPIO_FN_LCDD3, GPIO_FN_PORT195_KEYOUT3, GPIO_FN_PORT195_SCIFA5_RXD, - GPIO_FN_BBIF2_TXD1, - GPIO_FN_LCDD4, GPIO_FN_PORT196_KEYOUT4, GPIO_FN_PORT196_SCIFA5_TXD, - GPIO_FN_LCDD5, GPIO_FN_PORT197_KEYOUT5, GPIO_FN_PORT197_SCIFA5_SCK, - GPIO_FN_MFG2_OUT2, GPIO_FN_TPU2TO1, - GPIO_FN_LCDD6, GPIO_FN_XWR2, - GPIO_FN_LCDD7, GPIO_FN_TPU4TO1, GPIO_FN_MFG4_OUT2, GPIO_FN_XWR3, - GPIO_FN_LCDD8, GPIO_FN_PORT200_KEYIN0, GPIO_FN_VIO_DR0, GPIO_FN_D16, - GPIO_FN_ED16, - GPIO_FN_LCDD9, GPIO_FN_PORT201_KEYIN1, GPIO_FN_VIO_DR1, GPIO_FN_D17, - GPIO_FN_ED17, - GPIO_FN_LCDD10, GPIO_FN_PORT202_KEYIN2, GPIO_FN_VIO_DR2, GPIO_FN_D18, - GPIO_FN_ED18, - GPIO_FN_LCDD11, GPIO_FN_PORT203_KEYIN3, GPIO_FN_VIO_DR3, GPIO_FN_D19, - GPIO_FN_ED19, - GPIO_FN_LCDD12, GPIO_FN_PORT204_KEYIN4, GPIO_FN_VIO_DR4, GPIO_FN_D20, - GPIO_FN_ED20, - GPIO_FN_LCDD13, GPIO_FN_PORT205_KEYIN5, GPIO_FN_VIO_DR5, GPIO_FN_D21, - GPIO_FN_ED21, - GPIO_FN_LCDD14, GPIO_FN_PORT206_KEYIN6, GPIO_FN_VIO_DR6, GPIO_FN_D22, - GPIO_FN_ED22, - GPIO_FN_LCDD15, GPIO_FN_PORT207_MSIOF0L_SS1, GPIO_FN_PORT207_KEYOUT0, - GPIO_FN_VIO_DR7, - GPIO_FN_D23, GPIO_FN_ED23, - GPIO_FN_LCDD16, GPIO_FN_PORT208_MSIOF0L_SS2, GPIO_FN_PORT208_KEYOUT1, - GPIO_FN_VIO_VDR, - GPIO_FN_D24, GPIO_FN_ED24, - GPIO_FN_LCDD17, GPIO_FN_PORT209_KEYOUT2, GPIO_FN_VIO_HDR, GPIO_FN_D25, - GPIO_FN_ED25, - GPIO_FN_LCDD18, GPIO_FN_DREQ2, GPIO_FN_PORT210_MSIOF0L_SS1, GPIO_FN_D26, - GPIO_FN_ED26, - GPIO_FN_LCDD19, GPIO_FN_PORT211_MSIOF0L_SS2, GPIO_FN_D27, GPIO_FN_ED27, - GPIO_FN_LCDD20, GPIO_FN_TS_SPSYNC1, GPIO_FN_MSIOF0L_MCK0, GPIO_FN_D28, - GPIO_FN_ED28, - GPIO_FN_LCDD21, GPIO_FN_TS_SDAT1, GPIO_FN_MSIOF0L_MCK1, GPIO_FN_D29, - GPIO_FN_ED29, - GPIO_FN_LCDD22, GPIO_FN_TS_SDEN1, GPIO_FN_MSIOF0L_RSCK, GPIO_FN_D30, - GPIO_FN_ED30, - GPIO_FN_LCDD23, GPIO_FN_TS_SCK1, GPIO_FN_MSIOF0L_RSYNC, GPIO_FN_D31, - GPIO_FN_ED31, - GPIO_FN_LCDDCK, GPIO_FN_LCDWR, GPIO_FN_PORT216_KEYOUT3, - GPIO_FN_VIO_CLKR, - GPIO_FN_LCDRD, GPIO_FN_DACK2, GPIO_FN_MSIOF0L_TSYNC, - GPIO_FN_LCDHSYN, GPIO_FN_LCDCS, GPIO_FN_LCDCS2, GPIO_FN_DACK3, - GPIO_FN_PORT218_VIO_CKOR, GPIO_FN_PORT218_KEYOUT4, - GPIO_FN_LCDDISP, GPIO_FN_LCDRS, GPIO_FN_DREQ3, GPIO_FN_MSIOF0L_TSCK, - GPIO_FN_LCDVSYN, GPIO_FN_LCDVSYN2, GPIO_FN_PORT220_KEYOUT5, - GPIO_FN_LCDLCLK, GPIO_FN_DREQ1, GPIO_FN_PWEN, GPIO_FN_MSIOF0L_RXD, - GPIO_FN_LCDDON, GPIO_FN_LCDDON2, GPIO_FN_DACK1, GPIO_FN_OVCN, - GPIO_FN_MSIOF0L_TXD, - GPIO_FN_SCIFA1_TXD, GPIO_FN_OVCN2, - GPIO_FN_EXTLP, GPIO_FN_SCIFA1_SCK, GPIO_FN_USBTERM, - GPIO_FN_PORT226_VIO_CKO2, - GPIO_FN_SCIFA1_RTS, GPIO_FN_IDIN, - GPIO_FN_SCIFA1_RXD, - GPIO_FN_SCIFA1_CTS, GPIO_FN_MFG1_IN1, - GPIO_FN_MSIOF1_TXD, GPIO_FN_SCIFA2_TXD2, GPIO_FN_PORT230_FSIAOMC, - GPIO_FN_MSIOF1_TSYNC, GPIO_FN_SCIFA2_CTS2, GPIO_FN_PORT231_FSIAOLR, - GPIO_FN_MSIOF1_TSCK, GPIO_FN_SCIFA2_SCK2, GPIO_FN_PORT232_FSIAOBT, - GPIO_FN_MSIOF1_RXD, GPIO_FN_SCIFA2_RXD2, GPIO_FN_GPS_VCOTRIG, - GPIO_FN_PORT233_FSIACK, - GPIO_FN_MSIOF1_RSCK, GPIO_FN_SCIFA2_RTS2, GPIO_FN_PORT234_FSIAOSLD, - GPIO_FN_MSIOF1_RSYNC, GPIO_FN_OPORT0, GPIO_FN_MFG1_IN2, - GPIO_FN_PORT235_FSIAILR, - GPIO_FN_MSIOF1_MCK0, GPIO_FN_I2C_SDA2, GPIO_FN_PORT236_FSIAIBT, - GPIO_FN_MSIOF1_MCK1, GPIO_FN_I2C_SCL2, GPIO_FN_PORT237_FSIAISLD, - GPIO_FN_MSIOF1_SS1, GPIO_FN_EDBGREQ3, - - /* 55-5 (FN) */ - GPIO_FN_MSIOF1_SS2, - GPIO_FN_SCIFA6_TXD, - GPIO_FN_PORT241_IRDA_OUT, GPIO_FN_PORT241_IROUT, GPIO_FN_MFG4_OUT1, - GPIO_FN_TPU4TO0, - GPIO_FN_PORT242_IRDA_IN, GPIO_FN_MFG4_IN2, - GPIO_FN_PORT243_IRDA_FIRSEL, GPIO_FN_PORT243_VIO_CKO2, - GPIO_FN_PORT244_SCIFA5_CTS, GPIO_FN_MFG2_IN1, GPIO_FN_PORT244_SCIFB_CTS, - GPIO_FN_PORT244_MSIOF2_RXD, - GPIO_FN_PORT245_SCIFA5_RTS, GPIO_FN_MFG2_IN2, GPIO_FN_PORT245_SCIFB_RTS, - GPIO_FN_PORT245_MSIOF2_TXD, - GPIO_FN_PORT246_SCIFA5_RXD, GPIO_FN_MFG1_OUT1, - GPIO_FN_PORT246_SCIFB_RXD, GPIO_FN_TPU1TO0, - GPIO_FN_PORT247_SCIFA5_TXD, GPIO_FN_MFG3_OUT2, - GPIO_FN_PORT247_SCIFB_TXD, GPIO_FN_TPU3TO1, - GPIO_FN_PORT248_SCIFA5_SCK, GPIO_FN_MFG2_OUT1, - GPIO_FN_PORT248_SCIFB_SCK, GPIO_FN_TPU2TO0, - GPIO_FN_PORT248_MSIOF2_TSCK, - GPIO_FN_PORT249_IROUT, GPIO_FN_MFG4_IN1, GPIO_FN_PORT249_MSIOF2_TSYNC, - GPIO_FN_SDHICLK0, GPIO_FN_TCK2_SWCLK_MC0, - GPIO_FN_SDHICD0, - GPIO_FN_SDHID0_0, GPIO_FN_TMS2_SWDIO_MC0, - GPIO_FN_SDHID0_1, GPIO_FN_TDO2_SWO0_MC0, - GPIO_FN_SDHID0_2, GPIO_FN_TDI2, - GPIO_FN_SDHID0_3, GPIO_FN_RTCK2_SWO1_MC0, - GPIO_FN_SDHICMD0, GPIO_FN_TRST2, - GPIO_FN_SDHIWP0, GPIO_FN_EDBGREQ2, - GPIO_FN_SDHICLK1, GPIO_FN_TCK3_SWCLK_MC1, - GPIO_FN_SDHID1_0, GPIO_FN_M11_SLCD_SO2, GPIO_FN_TS_SPSYNC2, - GPIO_FN_TMS3_SWDIO_MC1, - GPIO_FN_SDHID1_1, GPIO_FN_M9_SLCD_A02, GPIO_FN_TS_SDAT2, - GPIO_FN_TDO3_SWO0_MC1, - GPIO_FN_SDHID1_2, GPIO_FN_M10_SLCD_CK2, GPIO_FN_TS_SDEN2, GPIO_FN_TDI3, - GPIO_FN_SDHID1_3, GPIO_FN_M12_SLCD_CE2, GPIO_FN_TS_SCK2, - GPIO_FN_RTCK3_SWO1_MC1, - GPIO_FN_SDHICMD1, GPIO_FN_TRST3, - GPIO_FN_RESETOUTS, -}; - -#endif /* __ASM_SH7377_H__ */ diff --git a/arch/arm/mach-shmobile/intc-sh7377.c b/arch/arm/mach-shmobile/intc-sh7377.c deleted file mode 100644 index b84a460..0000000 --- a/arch/arm/mach-shmobile/intc-sh7377.c +++ /dev/null @@ -1,592 +0,0 @@ -/* - * sh7377 processor support - INTC hardware block - * - * Copyright (C) 2010 Magnus Damm - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -enum { - UNUSED_INTCA = 0, - ENABLED, - DISABLED, - - /* interrupt sources INTCA */ - DIRC, - _2DG, - CRYPT_STD, - IIC1_ALI1, IIC1_TACKI1, IIC1_WAITI1, IIC1_DTEI1, - AP_ARM_IRQPMU, AP_ARM_COMMTX, AP_ARM_COMMRX, - MFI_MFIM, MFI_MFIS, - BBIF1, BBIF2, - USBDMAC_USHDMI, - USBHS_USHI0, USBHS_USHI1, - _3DG_SGX540, - CMT1_CMT10, CMT1_CMT11, CMT1_CMT12, CMT1_CMT13, CMT2, CMT3, - KEYSC_KEY, - SCIFA0, SCIFA1, SCIFA2, SCIFA3, - MSIOF2, MSIOF1, - SCIFA4, SCIFA5, SCIFB, - FLCTL_FLSTEI, FLCTL_FLTENDI, FLCTL_FLTREQ0I, FLCTL_FLTREQ1I, - SDHI0, - SDHI1, - MSU_MSU, MSU_MSU2, - IRREM, - MSUG, - IRDA, - TPU0, TPU1, TPU2, TPU3, TPU4, - LCRC, - PINTCA_PINT1, PINTCA_PINT2, - TTI20, - MISTY, - DDM, - RWDT0, RWDT1, - DMAC_1_DEI0, DMAC_1_DEI1, DMAC_1_DEI2, DMAC_1_DEI3, - DMAC_2_DEI4, DMAC_2_DEI5, DMAC_2_DADERR, - DMAC2_1_DEI0, DMAC2_1_DEI1, DMAC2_1_DEI2, DMAC2_1_DEI3, - DMAC2_2_DEI4, DMAC2_2_DEI5, DMAC2_2_DADERR, - DMAC3_1_DEI0, DMAC3_1_DEI1, DMAC3_1_DEI2, DMAC3_1_DEI3, - DMAC3_2_DEI4, DMAC3_2_DEI5, DMAC3_2_DADERR, - SHWYSTAT_RT, SHWYSTAT_HS, SHWYSTAT_COM, - ICUSB_ICUSB0, ICUSB_ICUSB1, - ICUDMC_ICUDMC1, ICUDMC_ICUDMC2, - SPU2_SPU0, SPU2_SPU1, - FSI, - FMSI, - SCUV, - IPMMU_IPMMUB, - AP_ARM_CTIIRQ, AP_ARM_DMAEXTERRIRQ, AP_ARM_DMAIRQ, AP_ARM_DMASIRQ, - MFIS2, - CPORTR2S, - CMT14, CMT15, - SCIFA6, - - /* interrupt groups INTCA */ - DMAC_1, DMAC_2, DMAC2_1, DMAC2_2, DMAC3_1, DMAC3_2, SHWYSTAT, - AP_ARM1, AP_ARM2, USBHS, SPU2, FLCTL, IIC1, - ICUSB, ICUDMC -}; - -static struct intc_vect intca_vectors[] __initdata = { - INTC_VECT(DIRC, 0x0560), - INTC_VECT(_2DG, 0x05e0), - INTC_VECT(CRYPT_STD, 0x0700), - INTC_VECT(IIC1_ALI1, 0x0780), INTC_VECT(IIC1_TACKI1, 0x07a0), - INTC_VECT(IIC1_WAITI1, 0x07c0), INTC_VECT(IIC1_DTEI1, 0x07e0), - INTC_VECT(AP_ARM_IRQPMU, 0x0800), INTC_VECT(AP_ARM_COMMTX, 0x0840), - INTC_VECT(AP_ARM_COMMRX, 0x0860), - INTC_VECT(MFI_MFIM, 0x0900), INTC_VECT(MFI_MFIS, 0x0920), - INTC_VECT(BBIF1, 0x0940), INTC_VECT(BBIF2, 0x0960), - INTC_VECT(USBDMAC_USHDMI, 0x0a00), - INTC_VECT(USBHS_USHI0, 0x0a20), INTC_VECT(USBHS_USHI1, 0x0a40), - INTC_VECT(_3DG_SGX540, 0x0a60), - INTC_VECT(CMT1_CMT10, 0x0b00), INTC_VECT(CMT1_CMT11, 0x0b20), - INTC_VECT(CMT1_CMT12, 0x0b40), INTC_VECT(CMT1_CMT13, 0x0b60), - INTC_VECT(CMT2, 0x0b80), INTC_VECT(CMT3, 0x0ba0), - INTC_VECT(KEYSC_KEY, 0x0be0), - INTC_VECT(SCIFA0, 0x0c00), INTC_VECT(SCIFA1, 0x0c20), - INTC_VECT(SCIFA2, 0x0c40), INTC_VECT(SCIFA3, 0x0c60), - INTC_VECT(MSIOF2, 0x0c80), INTC_VECT(MSIOF1, 0x0d00), - INTC_VECT(SCIFA4, 0x0d20), INTC_VECT(SCIFA5, 0x0d40), - INTC_VECT(SCIFB, 0x0d60), - INTC_VECT(FLCTL_FLSTEI, 0x0d80), INTC_VECT(FLCTL_FLTENDI, 0x0da0), - INTC_VECT(FLCTL_FLTREQ0I, 0x0dc0), INTC_VECT(FLCTL_FLTREQ1I, 0x0de0), - INTC_VECT(SDHI0, 0x0e00), INTC_VECT(SDHI0, 0x0e20), - INTC_VECT(SDHI0, 0x0e40), INTC_VECT(SDHI0, 0x0e60), - INTC_VECT(SDHI1, 0x0e80), INTC_VECT(SDHI1, 0x0ea0), - INTC_VECT(SDHI1, 0x0ec0), INTC_VECT(SDHI1, 0x0ee0), - INTC_VECT(MSU_MSU, 0x0f20), INTC_VECT(MSU_MSU2, 0x0f40), - INTC_VECT(IRREM, 0x0f60), - INTC_VECT(MSUG, 0x0fa0), - INTC_VECT(IRDA, 0x0480), - INTC_VECT(TPU0, 0x04a0), INTC_VECT(TPU1, 0x04c0), - INTC_VECT(TPU2, 0x04e0), INTC_VECT(TPU3, 0x0500), - INTC_VECT(TPU4, 0x0520), - INTC_VECT(LCRC, 0x0540), - INTC_VECT(PINTCA_PINT1, 0x1000), INTC_VECT(PINTCA_PINT2, 0x1020), - INTC_VECT(TTI20, 0x1100), - INTC_VECT(MISTY, 0x1120), - INTC_VECT(DDM, 0x1140), - INTC_VECT(RWDT0, 0x1280), INTC_VECT(RWDT1, 0x12a0), - INTC_VECT(DMAC_1_DEI0, 0x2000), INTC_VECT(DMAC_1_DEI1, 0x2020), - INTC_VECT(DMAC_1_DEI2, 0x2040), INTC_VECT(DMAC_1_DEI3, 0x2060), - INTC_VECT(DMAC_2_DEI4, 0x2080), INTC_VECT(DMAC_2_DEI5, 0x20a0), - INTC_VECT(DMAC_2_DADERR, 0x20c0), - INTC_VECT(DMAC2_1_DEI0, 0x2100), INTC_VECT(DMAC2_1_DEI1, 0x2120), - INTC_VECT(DMAC2_1_DEI2, 0x2140), INTC_VECT(DMAC2_1_DEI3, 0x2160), - INTC_VECT(DMAC2_2_DEI4, 0x2180), INTC_VECT(DMAC2_2_DEI5, 0x21a0), - INTC_VECT(DMAC2_2_DADERR, 0x21c0), - INTC_VECT(DMAC3_1_DEI0, 0x2200), INTC_VECT(DMAC3_1_DEI1, 0x2220), - INTC_VECT(DMAC3_1_DEI2, 0x2240), INTC_VECT(DMAC3_1_DEI3, 0x2260), - INTC_VECT(DMAC3_2_DEI4, 0x2280), INTC_VECT(DMAC3_2_DEI5, 0x22a0), - INTC_VECT(DMAC3_2_DADERR, 0x22c0), - INTC_VECT(SHWYSTAT_RT, 0x1300), INTC_VECT(SHWYSTAT_HS, 0x1d20), - INTC_VECT(SHWYSTAT_COM, 0x1340), - INTC_VECT(ICUSB_ICUSB0, 0x1700), INTC_VECT(ICUSB_ICUSB1, 0x1720), - INTC_VECT(ICUDMC_ICUDMC1, 0x1780), INTC_VECT(ICUDMC_ICUDMC2, 0x17a0), - INTC_VECT(SPU2_SPU0, 0x1800), INTC_VECT(SPU2_SPU1, 0x1820), - INTC_VECT(FSI, 0x1840), - INTC_VECT(FMSI, 0x1860), - INTC_VECT(SCUV, 0x1880), - INTC_VECT(IPMMU_IPMMUB, 0x1900), - INTC_VECT(AP_ARM_CTIIRQ, 0x1980), - INTC_VECT(AP_ARM_DMAEXTERRIRQ, 0x19a0), - INTC_VECT(AP_ARM_DMAIRQ, 0x19c0), - INTC_VECT(AP_ARM_DMASIRQ, 0x19e0), - INTC_VECT(MFIS2, 0x1a00), - INTC_VECT(CPORTR2S, 0x1a20), - INTC_VECT(CMT14, 0x1a40), INTC_VECT(CMT15, 0x1a60), - INTC_VECT(SCIFA6, 0x1a80), -}; - -static struct intc_group intca_groups[] __initdata = { - INTC_GROUP(DMAC_1, DMAC_1_DEI0, - DMAC_1_DEI1, DMAC_1_DEI2, DMAC_1_DEI3), - INTC_GROUP(DMAC_2, DMAC_2_DEI4, - DMAC_2_DEI5, DMAC_2_DADERR), - INTC_GROUP(DMAC2_1, DMAC2_1_DEI0, - DMAC2_1_DEI1, DMAC2_1_DEI2, DMAC2_1_DEI3), - INTC_GROUP(DMAC2_2, DMAC2_2_DEI4, - DMAC2_2_DEI5, DMAC2_2_DADERR), - INTC_GROUP(DMAC3_1, DMAC3_1_DEI0, - DMAC3_1_DEI1, DMAC3_1_DEI2, DMAC3_1_DEI3), - INTC_GROUP(DMAC3_2, DMAC3_2_DEI4, - DMAC3_2_DEI5, DMAC3_2_DADERR), - INTC_GROUP(AP_ARM1, AP_ARM_IRQPMU, AP_ARM_COMMTX, AP_ARM_COMMTX), - INTC_GROUP(USBHS, USBHS_USHI0, USBHS_USHI1), - INTC_GROUP(SPU2, SPU2_SPU0, SPU2_SPU1), - INTC_GROUP(FLCTL, FLCTL_FLSTEI, FLCTL_FLTENDI, - FLCTL_FLTREQ0I, FLCTL_FLTREQ1I), - INTC_GROUP(IIC1, IIC1_ALI1, IIC1_TACKI1, IIC1_WAITI1, IIC1_DTEI1), - INTC_GROUP(SHWYSTAT, SHWYSTAT_RT, SHWYSTAT_HS, SHWYSTAT_COM), - INTC_GROUP(ICUSB, ICUSB_ICUSB0, ICUSB_ICUSB1), - INTC_GROUP(ICUDMC, ICUDMC_ICUDMC1, ICUDMC_ICUDMC2), -}; - -static struct intc_mask_reg intca_mask_registers[] __initdata = { - { 0xe6940080, 0xe69400c0, 8, /* IMR0A / IMCR0A */ - { DMAC2_1_DEI3, DMAC2_1_DEI2, DMAC2_1_DEI1, DMAC2_1_DEI0, - AP_ARM_IRQPMU, 0, AP_ARM_COMMTX, AP_ARM_COMMRX } }, - { 0xe6940084, 0xe69400c4, 8, /* IMR1A / IMCR1A */ - { _2DG, CRYPT_STD, DIRC, 0, - DMAC_1_DEI3, DMAC_1_DEI2, DMAC_1_DEI1, DMAC_1_DEI0 } }, - { 0xe6940088, 0xe69400c8, 8, /* IMR2A / IMCR2A */ - { PINTCA_PINT1, PINTCA_PINT2, 0, 0, - BBIF1, BBIF2, MFI_MFIS, MFI_MFIM } }, - { 0xe694008c, 0xe69400cc, 8, /* IMR3A / IMCR3A */ - { DMAC3_1_DEI3, DMAC3_1_DEI2, DMAC3_1_DEI1, DMAC3_1_DEI0, - DMAC3_2_DADERR, DMAC3_2_DEI5, DMAC3_2_DEI4, IRDA } }, - { 0xe6940090, 0xe69400d0, 8, /* IMR4A / IMCR4A */ - { DDM, 0, 0, 0, - 0, 0, 0, 0 } }, - { 0xe6940094, 0xe69400d4, 8, /* IMR5A / IMCR5A */ - { KEYSC_KEY, DMAC_2_DADERR, DMAC_2_DEI5, DMAC_2_DEI4, - SCIFA3, SCIFA2, SCIFA1, SCIFA0 } }, - { 0xe6940098, 0xe69400d8, 8, /* IMR6A / IMCR6A */ - { SCIFB, SCIFA5, SCIFA4, MSIOF1, - 0, 0, MSIOF2, 0 } }, - { 0xe694009c, 0xe69400dc, 8, /* IMR7A / IMCR7A */ - { DISABLED, ENABLED, ENABLED, ENABLED, - FLCTL_FLTREQ1I, FLCTL_FLTREQ0I, FLCTL_FLTENDI, FLCTL_FLSTEI } }, - { 0xe69400a0, 0xe69400e0, 8, /* IMR8A / IMCR8A */ - { DISABLED, ENABLED, ENABLED, ENABLED, - TTI20, USBDMAC_USHDMI, 0, MSUG } }, - { 0xe69400a4, 0xe69400e4, 8, /* IMR9A / IMCR9A */ - { CMT1_CMT13, CMT1_CMT12, CMT1_CMT11, CMT1_CMT10, - CMT2, USBHS_USHI1, USBHS_USHI0, _3DG_SGX540 } }, - { 0xe69400a8, 0xe69400e8, 8, /* IMR10A / IMCR10A */ - { 0, DMAC2_2_DADERR, DMAC2_2_DEI5, DMAC2_2_DEI4, - 0, 0, 0, 0 } }, - { 0xe69400ac, 0xe69400ec, 8, /* IMR11A / IMCR11A */ - { IIC1_DTEI1, IIC1_WAITI1, IIC1_TACKI1, IIC1_ALI1, - LCRC, MSU_MSU2, IRREM, MSU_MSU } }, - { 0xe69400b0, 0xe69400f0, 8, /* IMR12A / IMCR12A */ - { 0, 0, TPU0, TPU1, - TPU2, TPU3, TPU4, 0 } }, - { 0xe69400b4, 0xe69400f4, 8, /* IMR13A / IMCR13A */ - { 0, 0, 0, 0, - MISTY, CMT3, RWDT1, RWDT0 } }, - { 0xe6950080, 0xe69500c0, 8, /* IMR0A3 / IMCR0A3 */ - { SHWYSTAT_RT, SHWYSTAT_HS, SHWYSTAT_COM, 0, - 0, 0, 0, 0 } }, - { 0xe6950090, 0xe69500d0, 8, /* IMR4A3 / IMCR4A3 */ - { ICUSB_ICUSB0, ICUSB_ICUSB1, 0, 0, - ICUDMC_ICUDMC1, ICUDMC_ICUDMC2, 0, 0 } }, - { 0xe6950094, 0xe69500d4, 8, /* IMR5A3 / IMCR5A3 */ - { SPU2_SPU0, SPU2_SPU1, FSI, FMSI, - SCUV, 0, 0, 0 } }, - { 0xe6950098, 0xe69500d8, 8, /* IMR6A3 / IMCR6A3 */ - { IPMMU_IPMMUB, 0, 0, 0, - AP_ARM_CTIIRQ, AP_ARM_DMAEXTERRIRQ, - AP_ARM_DMAIRQ, AP_ARM_DMASIRQ } }, - { 0xe695009c, 0xe69500dc, 8, /* IMR7A3 / IMCR7A3 */ - { MFIS2, CPORTR2S, CMT14, CMT15, - SCIFA6, 0, 0, 0 } }, -}; - -static struct intc_prio_reg intca_prio_registers[] __initdata = { - { 0xe6940000, 0, 16, 4, /* IPRAA */ { DMAC3_1, DMAC3_2, CMT2, LCRC } }, - { 0xe6940004, 0, 16, 4, /* IPRBA */ { IRDA, 0, BBIF1, BBIF2 } }, - { 0xe6940008, 0, 16, 4, /* IPRCA */ { _2DG, CRYPT_STD, - CMT1_CMT11, AP_ARM1 } }, - { 0xe694000c, 0, 16, 4, /* IPRDA */ { PINTCA_PINT1, PINTCA_PINT2, - CMT1_CMT12, TPU4 } }, - { 0xe6940010, 0, 16, 4, /* IPREA */ { DMAC_1, MFI_MFIS, - MFI_MFIM, USBHS } }, - { 0xe6940014, 0, 16, 4, /* IPRFA */ { KEYSC_KEY, DMAC_2, - _3DG_SGX540, CMT1_CMT10 } }, - { 0xe6940018, 0, 16, 4, /* IPRGA */ { SCIFA0, SCIFA1, - SCIFA2, SCIFA3 } }, - { 0xe694001c, 0, 16, 4, /* IPRGH */ { MSIOF2, USBDMAC_USHDMI, - FLCTL, SDHI0 } }, - { 0xe6940020, 0, 16, 4, /* IPRIA */ { MSIOF1, SCIFA4, MSU_MSU, IIC1 } }, - { 0xe6940024, 0, 16, 4, /* IPRJA */ { DMAC2_1, DMAC2_2, MSUG, TTI20 } }, - { 0xe6940028, 0, 16, 4, /* IPRKA */ { 0, CMT1_CMT13, IRREM, SDHI1 } }, - { 0xe694002c, 0, 16, 4, /* IPRLA */ { TPU0, TPU1, TPU2, TPU3 } }, - { 0xe6940030, 0, 16, 4, /* IPRMA */ { MISTY, CMT3, RWDT1, RWDT0 } }, - { 0xe6940034, 0, 16, 4, /* IPRNA */ { SCIFB, SCIFA5, 0, DDM } }, - { 0xe6940038, 0, 16, 4, /* IPROA */ { 0, 0, DIRC, 0 } }, - { 0xe6950000, 0, 16, 4, /* IPRAA3 */ { SHWYSTAT, 0, 0, 0 } }, - { 0xe6950020, 0, 16, 4, /* IPRIA3 */ { ICUSB, 0, 0, 0 } }, - { 0xe6950024, 0, 16, 4, /* IPRJA3 */ { ICUDMC, 0, 0, 0 } }, - { 0xe6950028, 0, 16, 4, /* IPRKA3 */ { SPU2, 0, FSI, FMSI } }, - { 0xe695002c, 0, 16, 4, /* IPRLA3 */ { SCUV, 0, 0, 0 } }, - { 0xe6950030, 0, 16, 4, /* IPRMA3 */ { IPMMU_IPMMUB, 0, 0, 0 } }, - { 0xe6950034, 0, 16, 4, /* IPRNA3 */ { AP_ARM2, 0, 0, 0 } }, - { 0xe6950038, 0, 16, 4, /* IPROA3 */ { MFIS2, CPORTR2S, - CMT14, CMT15 } }, - { 0xe694003c, 0, 16, 4, /* IPRPA3 */ { SCIFA6, 0, 0, 0 } }, -}; - -static struct intc_desc intca_desc __initdata = { - .name = "sh7377-intca", - .force_enable = ENABLED, - .force_disable = DISABLED, - .hw = INTC_HW_DESC(intca_vectors, intca_groups, - intca_mask_registers, intca_prio_registers, - NULL, NULL), -}; - -INTC_IRQ_PINS_32(intca_irq_pins, 0xe6900000, - INTC_VECT, "sh7377-intca-irq-pins"); - -/* this macro ignore entry which is also in INTCA */ -#define __IGNORE(a...) -#define __IGNORE0(a...) 0 - -enum { - UNUSED_INTCS = 0, - - INTCS, - - /* interrupt sources INTCS */ - VEU_VEU0, VEU_VEU1, VEU_VEU2, VEU_VEU3, - RTDMAC1_1_DEI0, RTDMAC1_1_DEI1, RTDMAC1_1_DEI2, RTDMAC1_1_DEI3, - CEU, - BEU_BEU0, BEU_BEU1, BEU_BEU2, - __IGNORE(MFI) - __IGNORE(BBIF2) - VPU, - TSIF1, - __IGNORE(SGX540) - _2DDMAC, - IIC2_ALI2, IIC2_TACKI2, IIC2_WAITI2, IIC2_DTEI2, - IPMMU_IPMMUR, IPMMU_IPMMUR2, - RTDMAC1_2_DEI4, RTDMAC1_2_DEI5, RTDMAC1_2_DADERR, - __IGNORE(KEYSC) - __IGNORE(TTI20) - __IGNORE(MSIOF) - IIC0_ALI0, IIC0_TACKI0, IIC0_WAITI0, IIC0_DTEI0, - TMU_TUNI0, TMU_TUNI1, TMU_TUNI2, - CMT0, - TSIF0, - __IGNORE(CMT2) - LMB, - __IGNORE(MSUG) - __IGNORE(MSU_MSU, MSU_MSU2) - __IGNORE(CTI) - MVI3, - __IGNORE(RWDT0) - __IGNORE(RWDT1) - ICB, - PEP, - ASA, - __IGNORE(_2DG) - HQE, - JPU, - LCDC0, - __IGNORE(LCRC) - RTDMAC2_1_DEI0, RTDMAC2_1_DEI1, RTDMAC2_1_DEI2, RTDMAC2_1_DEI3, - RTDMAC2_2_DEI4, RTDMAC2_2_DEI5, RTDMAC2_2_DADERR, - FRC, - LCDC1, - CSIRX, - DSITX_DSITX0, DSITX_DSITX1, - __IGNORE(SPU2_SPU0, SPU2_SPU1) - __IGNORE(FSI) - __IGNORE(FMSI) - __IGNORE(SCUV) - TMU1_TUNI10, TMU1_TUNI11, TMU1_TUNI12, - TSIF2, - CMT4, - __IGNORE(MFIS2) - CPORTS2R, - - /* interrupt groups INTCS */ - RTDMAC1_1, RTDMAC1_2, VEU, BEU, IIC0, __IGNORE(MSU) IPMMU, - IIC2, RTDMAC2_1, RTDMAC2_2, DSITX, __IGNORE(SPU2) TMU1, -}; - -#define INTCS_INTVECT 0x0F80 -static struct intc_vect intcs_vectors[] __initdata = { - INTCS_VECT(VEU_VEU0, 0x0700), INTCS_VECT(VEU_VEU1, 0x0720), - INTCS_VECT(VEU_VEU2, 0x0740), INTCS_VECT(VEU_VEU3, 0x0760), - INTCS_VECT(RTDMAC1_1_DEI0, 0x0800), INTCS_VECT(RTDMAC1_1_DEI1, 0x0820), - INTCS_VECT(RTDMAC1_1_DEI2, 0x0840), INTCS_VECT(RTDMAC1_1_DEI3, 0x0860), - INTCS_VECT(CEU, 0x0880), - INTCS_VECT(BEU_BEU0, 0x08A0), - INTCS_VECT(BEU_BEU1, 0x08C0), - INTCS_VECT(BEU_BEU2, 0x08E0), - __IGNORE(INTCS_VECT(MFI, 0x0900)) - __IGNORE(INTCS_VECT(BBIF2, 0x0960)) - INTCS_VECT(VPU, 0x0980), - INTCS_VECT(TSIF1, 0x09A0), - __IGNORE(INTCS_VECT(SGX540, 0x09E0)) - INTCS_VECT(_2DDMAC, 0x0A00), - INTCS_VECT(IIC2_ALI2, 0x0A80), INTCS_VECT(IIC2_TACKI2, 0x0AA0), - INTCS_VECT(IIC2_WAITI2, 0x0AC0), INTCS_VECT(IIC2_DTEI2, 0x0AE0), - INTCS_VECT(IPMMU_IPMMUR, 0x0B00), INTCS_VECT(IPMMU_IPMMUR2, 0x0B20), - INTCS_VECT(RTDMAC1_2_DEI4, 0x0B80), - INTCS_VECT(RTDMAC1_2_DEI5, 0x0BA0), - INTCS_VECT(RTDMAC1_2_DADERR, 0x0BC0), - __IGNORE(INTCS_VECT(KEYSC 0x0BE0)) - __IGNORE(INTCS_VECT(TTI20, 0x0C80)) - __IGNORE(INTCS_VECT(MSIOF, 0x0D20)) - INTCS_VECT(IIC0_ALI0, 0x0E00), INTCS_VECT(IIC0_TACKI0, 0x0E20), - INTCS_VECT(IIC0_WAITI0, 0x0E40), INTCS_VECT(IIC0_DTEI0, 0x0E60), - INTCS_VECT(TMU_TUNI0, 0x0E80), - INTCS_VECT(TMU_TUNI1, 0x0EA0), - INTCS_VECT(TMU_TUNI2, 0x0EC0), - INTCS_VECT(CMT0, 0x0F00), - INTCS_VECT(TSIF0, 0x0F20), - __IGNORE(INTCS_VECT(CMT2, 0x0F40)) - INTCS_VECT(LMB, 0x0F60), - __IGNORE(INTCS_VECT(MSUG, 0x0F80)) - __IGNORE(INTCS_VECT(MSU_MSU, 0x0FA0)) - __IGNORE(INTCS_VECT(MSU_MSU2, 0x0FC0)) - __IGNORE(INTCS_VECT(CTI, 0x0400)) - INTCS_VECT(MVI3, 0x0420), - __IGNORE(INTCS_VECT(RWDT0, 0x0440)) - __IGNORE(INTCS_VECT(RWDT1, 0x0460)) - INTCS_VECT(ICB, 0x0480), - INTCS_VECT(PEP, 0x04A0), - INTCS_VECT(ASA, 0x04C0), - __IGNORE(INTCS_VECT(_2DG, 0x04E0)) - INTCS_VECT(HQE, 0x0540), - INTCS_VECT(JPU, 0x0560), - INTCS_VECT(LCDC0, 0x0580), - __IGNORE(INTCS_VECT(LCRC, 0x05A0)) - INTCS_VECT(RTDMAC2_1_DEI0, 0x1300), INTCS_VECT(RTDMAC2_1_DEI1, 0x1320), - INTCS_VECT(RTDMAC2_1_DEI2, 0x1340), INTCS_VECT(RTDMAC2_1_DEI3, 0x1360), - INTCS_VECT(RTDMAC2_2_DEI4, 0x1380), INTCS_VECT(RTDMAC2_2_DEI5, 0x13A0), - INTCS_VECT(RTDMAC2_2_DADERR, 0x13C0), - INTCS_VECT(FRC, 0x1700), - INTCS_VECT(LCDC1, 0x1780), - INTCS_VECT(CSIRX, 0x17A0), - INTCS_VECT(DSITX_DSITX0, 0x17C0), INTCS_VECT(DSITX_DSITX1, 0x17E0), - __IGNORE(INTCS_VECT(SPU2_SPU0, 0x1800)) - __IGNORE(INTCS_VECT(SPU2_SPU1, 0x1820)) - __IGNORE(INTCS_VECT(FSI, 0x1840)) - __IGNORE(INTCS_VECT(FMSI, 0x1860)) - __IGNORE(INTCS_VECT(SCUV, 0x1880)) - INTCS_VECT(TMU1_TUNI10, 0x1900), INTCS_VECT(TMU1_TUNI11, 0x1920), - INTCS_VECT(TMU1_TUNI12, 0x1940), - INTCS_VECT(TSIF2, 0x1960), - INTCS_VECT(CMT4, 0x1980), - __IGNORE(INTCS_VECT(MFIS2, 0x1A00)) - INTCS_VECT(CPORTS2R, 0x1A20), - - INTC_VECT(INTCS, INTCS_INTVECT), -}; - -static struct intc_group intcs_groups[] __initdata = { - INTC_GROUP(RTDMAC1_1, - RTDMAC1_1_DEI0, RTDMAC1_1_DEI1, - RTDMAC1_1_DEI2, RTDMAC1_1_DEI3), - INTC_GROUP(RTDMAC1_2, - RTDMAC1_2_DEI4, RTDMAC1_2_DEI5, RTDMAC1_2_DADERR), - INTC_GROUP(VEU, VEU_VEU0, VEU_VEU1, VEU_VEU2, VEU_VEU3), - INTC_GROUP(BEU, BEU_BEU0, BEU_BEU1, BEU_BEU2), - INTC_GROUP(IIC0, IIC0_ALI0, IIC0_TACKI0, IIC0_WAITI0, IIC0_DTEI0), - __IGNORE(INTC_GROUP(MSU, MSU_MSU, MSU_MSU2)) - INTC_GROUP(IPMMU, IPMMU_IPMMUR, IPMMU_IPMMUR2), - INTC_GROUP(IIC2, IIC2_ALI2, IIC2_TACKI2, IIC2_WAITI2, IIC2_DTEI2), - INTC_GROUP(RTDMAC2_1, - RTDMAC2_1_DEI0, RTDMAC2_1_DEI1, - RTDMAC2_1_DEI2, RTDMAC2_1_DEI3), - INTC_GROUP(RTDMAC2_2, RTDMAC2_2_DEI4, RTDMAC2_2_DEI5, RTDMAC2_2_DADERR), - INTC_GROUP(DSITX, DSITX_DSITX0, DSITX_DSITX1), - __IGNORE(INTC_GROUP(SPU2, SPU2_SPU0, SPU2_SPU1)) - INTC_GROUP(TMU1, TMU1_TUNI10, TMU1_TUNI11, TMU1_TUNI12), -}; - -static struct intc_mask_reg intcs_mask_registers[] __initdata = { - { 0xE6940184, 0xE69401C4, 8, /* IMR1AS / IMCR1AS */ - { BEU_BEU2, BEU_BEU1, BEU_BEU0, CEU, - VEU_VEU3, VEU_VEU2, VEU_VEU1, VEU_VEU0 } }, - { 0xE6940188, 0xE69401C8, 8, /* IMR2AS / IMCR2AS */ - { 0, 0, 0, VPU, - __IGNORE0(BBIF2), 0, 0, __IGNORE0(MFI) } }, - { 0xE694018C, 0xE69401CC, 8, /* IMR3AS / IMCR3AS */ - { 0, 0, 0, _2DDMAC, - __IGNORE0(_2DG), ASA, PEP, ICB } }, - { 0xE6940190, 0xE69401D0, 8, /* IMR4AS / IMCR4AS */ - { 0, 0, MVI3, __IGNORE0(CTI), - JPU, HQE, __IGNORE0(LCRC), LCDC0 } }, - { 0xE6940194, 0xE69401D4, 8, /* IMR5AS / IMCR5AS */ - { __IGNORE0(KEYSC), RTDMAC1_2_DADERR, RTDMAC1_2_DEI5, RTDMAC1_2_DEI4, - RTDMAC1_1_DEI3, RTDMAC1_1_DEI2, RTDMAC1_1_DEI1, RTDMAC1_1_DEI0 } }, - __IGNORE({ 0xE6940198, 0xE69401D8, 8, /* IMR6AS / IMCR6AS */ - { 0, 0, MSIOF, 0, - SGX540, 0, TTI20, 0 } }) - { 0xE694019C, 0xE69401DC, 8, /* IMR7AS / IMCR7AS */ - { 0, TMU_TUNI2, TMU_TUNI1, TMU_TUNI0, - 0, 0, 0, 0 } }, - __IGNORE({ 0xE69401A0, 0xE69401E0, 8, /* IMR8AS / IMCR8AS */ - { 0, 0, 0, 0, - 0, MSU_MSU, MSU_MSU2, MSUG } }) - { 0xE69401A4, 0xE69401E4, 8, /* IMR9AS / IMCR9AS */ - { __IGNORE0(RWDT1), __IGNORE0(RWDT0), __IGNORE0(CMT2), CMT0, - IIC2_DTEI2, IIC2_WAITI2, IIC2_TACKI2, IIC2_ALI2 } }, - { 0xE69401A8, 0xE69401E8, 8, /* IMR10AS / IMCR10AS */ - { 0, 0, IPMMU_IPMMUR, IPMMU_IPMMUR2, - 0, 0, 0, 0 } }, - { 0xE69401AC, 0xE69401EC, 8, /* IMR11AS / IMCR11AS */ - { IIC0_DTEI0, IIC0_WAITI0, IIC0_TACKI0, IIC0_ALI0, - 0, TSIF1, LMB, TSIF0 } }, - { 0xE6950180, 0xE69501C0, 8, /* IMR0AS3 / IMCR0AS3 */ - { RTDMAC2_1_DEI0, RTDMAC2_1_DEI1, RTDMAC2_1_DEI2, RTDMAC2_1_DEI3, - RTDMAC2_2_DEI4, RTDMAC2_2_DEI5, RTDMAC2_2_DADERR, 0 } }, - { 0xE6950190, 0xE69501D0, 8, /* IMR4AS3 / IMCR4AS3 */ - { FRC, 0, 0, 0, - LCDC1, CSIRX, DSITX_DSITX0, DSITX_DSITX1 } }, - __IGNORE({ 0xE6950194, 0xE69501D4, 8, /* IMR5AS3 / IMCR5AS3 */ - {SPU2_SPU0, SPU2_SPU1, FSI, FMSI, - SCUV, 0, 0, 0 } }) - { 0xE6950198, 0xE69501D8, 8, /* IMR6AS3 / IMCR6AS3 */ - { TMU1_TUNI10, TMU1_TUNI11, TMU1_TUNI12, TSIF2, - CMT4, 0, 0, 0 } }, - { 0xE695019C, 0xE69501DC, 8, /* IMR7AS3 / IMCR7AS3 */ - { __IGNORE0(MFIS2), CPORTS2R, 0, 0, - 0, 0, 0, 0 } }, - { 0xFFD20104, 0, 16, /* INTAMASK */ - { 0, 0, 0, 0, 0, 0, 0, 0, - 0, 0, 0, 0, 0, 0, 0, INTCS } } -}; - -static struct intc_prio_reg intcs_prio_registers[] __initdata = { - /* IPRAS */ - { 0xFFD20000, 0, 16, 4, { __IGNORE0(CTI), MVI3, _2DDMAC, ICB } }, - /* IPRBS */ - { 0xFFD20004, 0, 16, 4, { JPU, LCDC0, 0, __IGNORE0(LCRC) } }, - /* IPRCS */ - __IGNORE({ 0xFFD20008, 0, 16, 4, { BBIF2, 0, 0, 0 } }) - /* IPRES */ - { 0xFFD20010, 0, 16, 4, { RTDMAC1_1, CEU, __IGNORE0(MFI), VPU } }, - /* IPRFS */ - { 0xFFD20014, 0, 16, 4, - { __IGNORE0(KEYSC), RTDMAC1_2, __IGNORE0(CMT2), CMT0 } }, - /* IPRGS */ - { 0xFFD20018, 0, 16, 4, { TMU_TUNI0, TMU_TUNI1, TMU_TUNI2, TSIF1 } }, - /* IPRHS */ - { 0xFFD2001C, 0, 16, 4, { __IGNORE0(TTI20), 0, VEU, BEU } }, - /* IPRIS */ - { 0xFFD20020, 0, 16, 4, { 0, __IGNORE0(MSIOF), TSIF0, IIC0 } }, - /* IPRJS */ - __IGNORE({ 0xFFD20024, 0, 16, 4, { 0, SGX540, MSUG, MSU } }) - /* IPRKS */ - { 0xFFD20028, 0, 16, 4, { __IGNORE0(_2DG), ASA, LMB, PEP } }, - /* IPRLS */ - { 0xFFD2002C, 0, 16, 4, { IPMMU, 0, 0, HQE } }, - /* IPRMS */ - { 0xFFD20030, 0, 16, 4, - { IIC2, 0, __IGNORE0(RWDT1), __IGNORE0(RWDT0) } }, - /* IPRAS3 */ - { 0xFFD50000, 0, 16, 4, { RTDMAC2_1, 0, 0, 0 } }, - /* IPRBS3 */ - { 0xFFD50004, 0, 16, 4, { RTDMAC2_2, 0, 0, 0 } }, - /* IPRIS3 */ - { 0xFFD50020, 0, 16, 4, { FRC, 0, 0, 0 } }, - /* IPRJS3 */ - { 0xFFD50024, 0, 16, 4, { LCDC1, CSIRX, DSITX, 0 } }, - /* IPRKS3 */ - __IGNORE({ 0xFFD50028, 0, 16, 4, { SPU2, 0, FSI, FMSI } }) - /* IPRLS3 */ - __IGNORE({ 0xFFD5002C, 0, 16, 4, { SCUV, 0, 0, 0 } }) - /* IPRMS3 */ - { 0xFFD50030, 0, 16, 4, { TMU1, 0, 0, TSIF2 } }, - /* IPRNS3 */ - { 0xFFD50034, 0, 16, 4, { CMT4, 0, 0, 0 } }, - /* IPROS3 */ - { 0xFFD50038, 0, 16, 4, { __IGNORE0(MFIS2), CPORTS2R, 0, 0 } }, -}; - -static struct resource intcs_resources[] __initdata = { - [0] = { - .start = 0xffd20000, - .end = 0xffd500ff, - .flags = IORESOURCE_MEM, - } -}; - -static struct intc_desc intcs_desc __initdata = { - .name = "sh7377-intcs", - .resource = intcs_resources, - .num_resources = ARRAY_SIZE(intcs_resources), - .hw = INTC_HW_DESC(intcs_vectors, intcs_groups, - intcs_mask_registers, intcs_prio_registers, - NULL, NULL), -}; - -static void intcs_demux(unsigned int irq, struct irq_desc *desc) -{ - void __iomem *reg = (void *)irq_get_handler_data(irq); - unsigned int evtcodeas = ioread32(reg); - - generic_handle_irq(intcs_evt2irq(evtcodeas)); -} - -#define INTEVTSA 0xFFD20100 -void __init sh7377_init_irq(void) -{ - void __iomem *intevtsa = ioremap_nocache(INTEVTSA, PAGE_SIZE); - - register_intc_controller(&intca_desc); - register_intc_controller(&intca_irq_pins_desc); - register_intc_controller(&intcs_desc); - - /* demux using INTEVTSA */ - irq_set_handler_data(evt2irq(INTCS_INTVECT), (void *)intevtsa); - irq_set_chained_handler(evt2irq(INTCS_INTVECT), intcs_demux); -} diff --git a/arch/arm/mach-shmobile/pfc-sh7377.c b/arch/arm/mach-shmobile/pfc-sh7377.c deleted file mode 100644 index f3117f6..0000000 --- a/arch/arm/mach-shmobile/pfc-sh7377.c +++ /dev/null @@ -1,1688 +0,0 @@ -/* - * sh7377 processor support - PFC hardware block - * - * Copyright (C) 2010 NISHIMOTO Hiroki - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; version 2 of the - * License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ -#include -#include -#include -#include - -#define CPU_ALL_PORT(fn, pfx, sfx) \ - PORT_10(fn, pfx, sfx), PORT_90(fn, pfx, sfx), \ - PORT_10(fn, pfx##10, sfx), \ - PORT_1(fn, pfx##110, sfx), PORT_1(fn, pfx##111, sfx), \ - PORT_1(fn, pfx##112, sfx), PORT_1(fn, pfx##113, sfx), \ - PORT_1(fn, pfx##114, sfx), PORT_1(fn, pfx##115, sfx), \ - PORT_1(fn, pfx##116, sfx), PORT_1(fn, pfx##117, sfx), \ - PORT_1(fn, pfx##118, sfx), \ - PORT_1(fn, pfx##128, sfx), PORT_1(fn, pfx##129, sfx), \ - PORT_10(fn, pfx##13, sfx), PORT_10(fn, pfx##14, sfx), \ - PORT_10(fn, pfx##15, sfx), \ - PORT_1(fn, pfx##160, sfx), PORT_1(fn, pfx##161, sfx), \ - PORT_1(fn, pfx##162, sfx), PORT_1(fn, pfx##163, sfx), \ - PORT_1(fn, pfx##164, sfx), \ - PORT_1(fn, pfx##192, sfx), PORT_1(fn, pfx##193, sfx), \ - PORT_1(fn, pfx##194, sfx), PORT_1(fn, pfx##195, sfx), \ - PORT_1(fn, pfx##196, sfx), PORT_1(fn, pfx##197, sfx), \ - PORT_1(fn, pfx##198, sfx), PORT_1(fn, pfx##199, sfx), \ - PORT_10(fn, pfx##20, sfx), PORT_10(fn, pfx##21, sfx), \ - PORT_10(fn, pfx##22, sfx), PORT_10(fn, pfx##23, sfx), \ - PORT_10(fn, pfx##24, sfx), PORT_10(fn, pfx##25, sfx), \ - PORT_1(fn, pfx##260, sfx), PORT_1(fn, pfx##261, sfx), \ - PORT_1(fn, pfx##262, sfx), PORT_1(fn, pfx##263, sfx), \ - PORT_1(fn, pfx##264, sfx) - -enum { - PINMUX_RESERVED = 0, - - PINMUX_DATA_BEGIN, - PORT_ALL(DATA), /* PORT0_DATA -> PORT264_DATA */ - PINMUX_DATA_END, - - PINMUX_INPUT_BEGIN, - PORT_ALL(IN), /* PORT0_IN -> PORT264_IN */ - PINMUX_INPUT_END, - - PINMUX_INPUT_PULLUP_BEGIN, - PORT_ALL(IN_PU), /* PORT0_IN_PU -> PORT264_IN_PU */ - PINMUX_INPUT_PULLUP_END, - - PINMUX_INPUT_PULLDOWN_BEGIN, - PORT_ALL(IN_PD), /* PORT0_IN_PD -> PORT264_IN_PD */ - PINMUX_INPUT_PULLDOWN_END, - - PINMUX_OUTPUT_BEGIN, - PORT_ALL(OUT), /* PORT0_OUT -> PORT264_OUT */ - PINMUX_OUTPUT_END, - - PINMUX_FUNCTION_BEGIN, - PORT_ALL(FN_IN), /* PORT0_FN_IN -> PORT264_FN_IN */ - PORT_ALL(FN_OUT), /* PORT0_FN_OUT -> PORT264_FN_OUT */ - PORT_ALL(FN0), /* PORT0_FN0 -> PORT264_FN0 */ - PORT_ALL(FN1), /* PORT0_FN1 -> PORT264_FN1 */ - PORT_ALL(FN2), /* PORT0_FN2 -> PORT264_FN2 */ - PORT_ALL(FN3), /* PORT0_FN3 -> PORT264_FN3 */ - PORT_ALL(FN4), /* PORT0_FN4 -> PORT264_FN4 */ - PORT_ALL(FN5), /* PORT0_FN5 -> PORT264_FN5 */ - PORT_ALL(FN6), /* PORT0_FN6 -> PORT264_FN6 */ - PORT_ALL(FN7), /* PORT0_FN7 -> PORT264_FN7 */ - - MSELBCR_MSEL17_1, MSELBCR_MSEL17_0, - MSELBCR_MSEL16_1, MSELBCR_MSEL16_0, - PINMUX_FUNCTION_END, - - PINMUX_MARK_BEGIN, - /* Special Pull-up / Pull-down Functions */ - PORT66_KEYIN0_PU_MARK, PORT67_KEYIN1_PU_MARK, - PORT68_KEYIN2_PU_MARK, PORT69_KEYIN3_PU_MARK, - PORT70_KEYIN4_PU_MARK, PORT71_KEYIN5_PU_MARK, - PORT72_KEYIN6_PU_MARK, - - /* 55-1 */ - VBUS_0_MARK, - CPORT0_MARK, - CPORT1_MARK, - CPORT2_MARK, - CPORT3_MARK, - CPORT4_MARK, - CPORT5_MARK, - CPORT6_MARK, - CPORT7_MARK, - CPORT8_MARK, - CPORT9_MARK, - CPORT10_MARK, - CPORT11_MARK, SIN2_MARK, - CPORT12_MARK, XCTS2_MARK, - CPORT13_MARK, RFSPO4_MARK, - CPORT14_MARK, RFSPO5_MARK, - CPORT15_MARK, SCIFA0_SCK_MARK, GPS_AGC2_MARK, - CPORT16_MARK, SCIFA0_TXD_MARK, GPS_AGC3_MARK, - CPORT17_IC_OE_MARK, SOUT2_MARK, - CPORT18_MARK, XRTS2_MARK, PORT19_VIO_CKO2_MARK, - CPORT19_MPORT1_MARK, - CPORT20_MARK, RFSPO6_MARK, - CPORT21_MARK, STATUS0_MARK, - CPORT22_MARK, STATUS1_MARK, - CPORT23_MARK, STATUS2_MARK, RFSPO7_MARK, - B_SYNLD1_MARK, - B_SYNLD2_MARK, SYSENMSK_MARK, - XMAINPS_MARK, - XDIVPS_MARK, - XIDRST_MARK, - IDCLK_MARK, IC_DP_MARK, - IDIO_MARK, IC_DM_MARK, - SOUT1_MARK, SCIFA4_TXD_MARK, M02_BERDAT_MARK, - SIN1_MARK, SCIFA4_RXD_MARK, XWUP_MARK, - XRTS1_MARK, SCIFA4_RTS_MARK, M03_BERCLK_MARK, - XCTS1_MARK, SCIFA4_CTS_MARK, - PCMCLKO_MARK, - SYNC8KO_MARK, - - /* 55-2 */ - DNPCM_A_MARK, - UPPCM_A_MARK, - VACK_MARK, - XTALB1L_MARK, - GPS_AGC1_MARK, SCIFA0_RTS_MARK, - GPS_AGC4_MARK, SCIFA0_RXD_MARK, - GPS_PWRDOWN_MARK, SCIFA0_CTS_MARK, - GPS_IM_MARK, - GPS_IS_MARK, - GPS_QM_MARK, - GPS_QS_MARK, - FMSOCK_MARK, PORT49_IRDA_OUT_MARK, PORT49_IROUT_MARK, - FMSOOLR_MARK, BBIF2_TSYNC2_MARK, TPU2TO2_MARK, IPORT3_MARK, - FMSIOLR_MARK, - FMSOOBT_MARK, BBIF2_TSCK2_MARK, TPU2TO3_MARK, OPORT1_MARK, - FMSIOBT_MARK, - FMSOSLD_MARK, BBIF2_TXD2_MARK, OPORT2_MARK, - FMSOILR_MARK, PORT53_IRDA_IN_MARK, TPU3TO3_MARK, OPORT3_MARK, - FMSIILR_MARK, - FMSOIBT_MARK, PORT54_IRDA_FIRSEL_MARK, TPU3TO2_MARK, FMSIIBT_MARK, - FMSISLD_MARK, MFG0_OUT1_MARK, TPU0TO0_MARK, - A0_EA0_MARK, BS_MARK, - A12_EA12_MARK, PORT58_VIO_CKOR_MARK, TPU4TO2_MARK, - A13_EA13_MARK, PORT59_IROUT_MARK, MFG0_OUT2_MARK, TPU0TO1_MARK, - A14_EA14_MARK, PORT60_KEYOUT5_MARK, - A15_EA15_MARK, PORT61_KEYOUT4_MARK, - A16_EA16_MARK, PORT62_KEYOUT3_MARK, MSIOF0_SS1_MARK, - A17_EA17_MARK, PORT63_KEYOUT2_MARK, MSIOF0_TSYNC_MARK, - A18_EA18_MARK, PORT64_KEYOUT1_MARK, MSIOF0_TSCK_MARK, - A19_EA19_MARK, PORT65_KEYOUT0_MARK, MSIOF0_TXD_MARK, - A20_EA20_MARK, PORT66_KEYIN0_MARK, MSIOF0_RSCK_MARK, - A21_EA21_MARK, PORT67_KEYIN1_MARK, MSIOF0_RSYNC_MARK, - A22_EA22_MARK, PORT68_KEYIN2_MARK, MSIOF0_MCK0_MARK, - A23_EA23_MARK, PORT69_KEYIN3_MARK, MSIOF0_MCK1_MARK, - A24_EA24_MARK, PORT70_KEYIN4_MARK, MSIOF0_RXD_MARK, - A25_EA25_MARK, PORT71_KEYIN5_MARK, MSIOF0_SS2_MARK, - A26_MARK, PORT72_KEYIN6_MARK, - D0_ED0_NAF0_MARK, - D1_ED1_NAF1_MARK, - D2_ED2_NAF2_MARK, - D3_ED3_NAF3_MARK, - D4_ED4_NAF4_MARK, - D5_ED5_NAF5_MARK, - D6_ED6_NAF6_MARK, - D7_ED7_NAF7_MARK, - D8_ED8_NAF8_MARK, - D9_ED9_NAF9_MARK, - D10_ED10_NAF10_MARK, - D11_ED11_NAF11_MARK, - D12_ED12_NAF12_MARK, - D13_ED13_NAF13_MARK, - D14_ED14_NAF14_MARK, - D15_ED15_NAF15_MARK, - CS4_MARK, - CS5A_MARK, FMSICK_MARK, - CS5B_MARK, FCE1_MARK, - - /* 55-3 */ - CS6B_MARK, XCS2_MARK, CS6A_MARK, DACK0_MARK, - FCE0_MARK, - WAIT_MARK, DREQ0_MARK, - RD_XRD_MARK, - WE0_XWR0_FWE_MARK, - WE1_XWR1_MARK, - FRB_MARK, - CKO_MARK, - NBRSTOUT_MARK, - NBRST_MARK, - GPS_EPPSIN_MARK, - LATCHPULSE_MARK, - LTESIGNAL_MARK, - LEGACYSTATE_MARK, - TCKON_MARK, - VIO_VD_MARK, PORT128_KEYOUT0_MARK, IPORT0_MARK, - VIO_HD_MARK, PORT129_KEYOUT1_MARK, IPORT1_MARK, - VIO_D0_MARK, PORT130_KEYOUT2_MARK, PORT130_MSIOF2_RXD_MARK, - VIO_D1_MARK, PORT131_KEYOUT3_MARK, PORT131_MSIOF2_SS1_MARK, - VIO_D2_MARK, PORT132_KEYOUT4_MARK, PORT132_MSIOF2_SS2_MARK, - VIO_D3_MARK, PORT133_KEYOUT5_MARK, PORT133_MSIOF2_TSYNC_MARK, - VIO_D4_MARK, PORT134_KEYIN0_MARK, PORT134_MSIOF2_TXD_MARK, - VIO_D5_MARK, PORT135_KEYIN1_MARK, PORT135_MSIOF2_TSCK_MARK, - VIO_D6_MARK, PORT136_KEYIN2_MARK, - VIO_D7_MARK, PORT137_KEYIN3_MARK, - VIO_D8_MARK, M9_SLCD_A01_MARK, PORT138_FSIAOMC_MARK, - VIO_D9_MARK, M10_SLCD_CK1_MARK, PORT139_FSIAOLR_MARK, - VIO_D10_MARK, M11_SLCD_SO1_MARK, TPU0TO2_MARK, PORT140_FSIAOBT_MARK, - VIO_D11_MARK, M12_SLCD_CE1_MARK, TPU0TO3_MARK, PORT141_FSIAOSLD_MARK, - VIO_D12_MARK, M13_BSW_MARK, PORT142_FSIACK_MARK, - VIO_D13_MARK, M14_GSW_MARK, PORT143_FSIAILR_MARK, - VIO_D14_MARK, M15_RSW_MARK, PORT144_FSIAIBT_MARK, - VIO_D15_MARK, TPU1TO3_MARK, PORT145_FSIAISLD_MARK, - VIO_CLK_MARK, PORT146_KEYIN4_MARK, IPORT2_MARK, - VIO_FIELD_MARK, PORT147_KEYIN5_MARK, - VIO_CKO_MARK, PORT148_KEYIN6_MARK, - A27_MARK, RDWR_XWE_MARK, MFG0_IN1_MARK, - MFG0_IN2_MARK, - TS_SPSYNC3_MARK, MSIOF2_RSCK_MARK, - TS_SDAT3_MARK, MSIOF2_RSYNC_MARK, - TPU1TO2_MARK, TS_SDEN3_MARK, PORT153_MSIOF2_SS1_MARK, - SOUT3_MARK, SCIFA2_TXD1_MARK, MSIOF2_MCK0_MARK, - SIN3_MARK, SCIFA2_RXD1_MARK, MSIOF2_MCK1_MARK, - XRTS3_MARK, SCIFA2_RTS1_MARK, PORT156_MSIOF2_SS2_MARK, - XCTS3_MARK, SCIFA2_CTS1_MARK, PORT157_MSIOF2_RXD_MARK, - - /* 55-4 */ - DINT_MARK, SCIFA2_SCK1_MARK, TS_SCK3_MARK, - PORT159_SCIFB_SCK_MARK, PORT159_SCIFA5_SCK_MARK, NMI_MARK, - PORT160_SCIFB_TXD_MARK, PORT160_SCIFA5_TXD_MARK, SOUT0_MARK, - PORT161_SCIFB_CTS_MARK, PORT161_SCIFA5_CTS_MARK, XCTS0_MARK, - MFG3_IN2_MARK, - PORT162_SCIFB_RXD_MARK, PORT162_SCIFA5_RXD_MARK, SIN0_MARK, - MFG3_IN1_MARK, - PORT163_SCIFB_RTS_MARK, PORT163_SCIFA5_RTS_MARK, XRTS0_MARK, - MFG3_OUT1_MARK, TPU3TO0_MARK, - LCDD0_MARK, PORT192_KEYOUT0_MARK, EXT_CKI_MARK, - LCDD1_MARK, PORT193_KEYOUT1_MARK, PORT193_SCIFA5_CTS_MARK, - BBIF2_TSYNC1_MARK, - LCDD2_MARK, PORT194_KEYOUT2_MARK, PORT194_SCIFA5_RTS_MARK, - BBIF2_TSCK1_MARK, - LCDD3_MARK, PORT195_KEYOUT3_MARK, PORT195_SCIFA5_RXD_MARK, - BBIF2_TXD1_MARK, - LCDD4_MARK, PORT196_KEYOUT4_MARK, PORT196_SCIFA5_TXD_MARK, - LCDD5_MARK, PORT197_KEYOUT5_MARK, PORT197_SCIFA5_SCK_MARK, - MFG2_OUT2_MARK, - TPU2TO1_MARK, - LCDD6_MARK, XWR2_MARK, - LCDD7_MARK, TPU4TO1_MARK, MFG4_OUT2_MARK, XWR3_MARK, - LCDD8_MARK, PORT200_KEYIN0_MARK, VIO_DR0_MARK, D16_MARK, ED16_MARK, - LCDD9_MARK, PORT201_KEYIN1_MARK, VIO_DR1_MARK, D17_MARK, ED17_MARK, - LCDD10_MARK, PORT202_KEYIN2_MARK, VIO_DR2_MARK, D18_MARK, ED18_MARK, - LCDD11_MARK, PORT203_KEYIN3_MARK, VIO_DR3_MARK, D19_MARK, ED19_MARK, - LCDD12_MARK, PORT204_KEYIN4_MARK, VIO_DR4_MARK, D20_MARK, ED20_MARK, - LCDD13_MARK, PORT205_KEYIN5_MARK, VIO_DR5_MARK, D21_MARK, ED21_MARK, - LCDD14_MARK, PORT206_KEYIN6_MARK, VIO_DR6_MARK, D22_MARK, ED22_MARK, - LCDD15_MARK, PORT207_MSIOF0L_SS1_MARK, PORT207_KEYOUT0_MARK, - VIO_DR7_MARK, D23_MARK, ED23_MARK, - LCDD16_MARK, PORT208_MSIOF0L_SS2_MARK, PORT208_KEYOUT1_MARK, - VIO_VDR_MARK, D24_MARK, ED24_MARK, - LCDD17_MARK, PORT209_KEYOUT2_MARK, VIO_HDR_MARK, D25_MARK, ED25_MARK, - LCDD18_MARK, DREQ2_MARK, PORT210_MSIOF0L_SS1_MARK, D26_MARK, ED26_MARK, - LCDD19_MARK, PORT211_MSIOF0L_SS2_MARK, D27_MARK, ED27_MARK, - LCDD20_MARK, TS_SPSYNC1_MARK, MSIOF0L_MCK0_MARK, D28_MARK, ED28_MARK, - LCDD21_MARK, TS_SDAT1_MARK, MSIOF0L_MCK1_MARK, D29_MARK, ED29_MARK, - LCDD22_MARK, TS_SDEN1_MARK, MSIOF0L_RSCK_MARK, D30_MARK, ED30_MARK, - LCDD23_MARK, TS_SCK1_MARK, MSIOF0L_RSYNC_MARK, D31_MARK, ED31_MARK, - LCDDCK_MARK, LCDWR_MARK, PORT216_KEYOUT3_MARK, VIO_CLKR_MARK, - LCDRD_MARK, DACK2_MARK, MSIOF0L_TSYNC_MARK, - LCDHSYN_MARK, LCDCS_MARK, LCDCS2_MARK, DACK3_MARK, - PORT218_VIO_CKOR_MARK, PORT218_KEYOUT4_MARK, - LCDDISP_MARK, LCDRS_MARK, DREQ3_MARK, MSIOF0L_TSCK_MARK, - LCDVSYN_MARK, LCDVSYN2_MARK, PORT220_KEYOUT5_MARK, - LCDLCLK_MARK, DREQ1_MARK, PWEN_MARK, MSIOF0L_RXD_MARK, - LCDDON_MARK, LCDDON2_MARK, DACK1_MARK, OVCN_MARK, MSIOF0L_TXD_MARK, - SCIFA1_TXD_MARK, OVCN2_MARK, - EXTLP_MARK, SCIFA1_SCK_MARK, USBTERM_MARK, PORT226_VIO_CKO2_MARK, - SCIFA1_RTS_MARK, IDIN_MARK, - SCIFA1_RXD_MARK, - SCIFA1_CTS_MARK, MFG1_IN1_MARK, - MSIOF1_TXD_MARK, SCIFA2_TXD2_MARK, PORT230_FSIAOMC_MARK, - MSIOF1_TSYNC_MARK, SCIFA2_CTS2_MARK, PORT231_FSIAOLR_MARK, - MSIOF1_TSCK_MARK, SCIFA2_SCK2_MARK, PORT232_FSIAOBT_MARK, - MSIOF1_RXD_MARK, SCIFA2_RXD2_MARK, GPS_VCOTRIG_MARK, - PORT233_FSIACK_MARK, - MSIOF1_RSCK_MARK, SCIFA2_RTS2_MARK, PORT234_FSIAOSLD_MARK, - MSIOF1_RSYNC_MARK, OPORT0_MARK, MFG1_IN2_MARK, PORT235_FSIAILR_MARK, - MSIOF1_MCK0_MARK, I2C_SDA2_MARK, PORT236_FSIAIBT_MARK, - MSIOF1_MCK1_MARK, I2C_SCL2_MARK, PORT237_FSIAISLD_MARK, - MSIOF1_SS1_MARK, EDBGREQ3_MARK, - - /* 55-5 */ - MSIOF1_SS2_MARK, - SCIFA6_TXD_MARK, - PORT241_IRDA_OUT_MARK, PORT241_IROUT_MARK, MFG4_OUT1_MARK, - TPU4TO0_MARK, - PORT242_IRDA_IN_MARK, MFG4_IN2_MARK, - PORT243_IRDA_FIRSEL_MARK, PORT243_VIO_CKO2_MARK, - PORT244_SCIFA5_CTS_MARK, MFG2_IN1_MARK, PORT244_SCIFB_CTS_MARK, - PORT244_MSIOF2_RXD_MARK, - PORT245_SCIFA5_RTS_MARK, MFG2_IN2_MARK, PORT245_SCIFB_RTS_MARK, - PORT245_MSIOF2_TXD_MARK, - PORT246_SCIFA5_RXD_MARK, MFG1_OUT1_MARK, PORT246_SCIFB_RXD_MARK, - TPU1TO0_MARK, - PORT247_SCIFA5_TXD_MARK, MFG3_OUT2_MARK, PORT247_SCIFB_TXD_MARK, - TPU3TO1_MARK, - PORT248_SCIFA5_SCK_MARK, MFG2_OUT1_MARK, PORT248_SCIFB_SCK_MARK, - TPU2TO0_MARK, - PORT248_MSIOF2_TSCK_MARK, - PORT249_IROUT_MARK, MFG4_IN1_MARK, PORT249_MSIOF2_TSYNC_MARK, - SDHICLK0_MARK, TCK2_SWCLK_MC0_MARK, - SDHICD0_MARK, - SDHID0_0_MARK, TMS2_SWDIO_MC0_MARK, - SDHID0_1_MARK, TDO2_SWO0_MC0_MARK, - SDHID0_2_MARK, TDI2_MARK, - SDHID0_3_MARK, RTCK2_SWO1_MC0_MARK, - SDHICMD0_MARK, TRST2_MARK, - SDHIWP0_MARK, EDBGREQ2_MARK, - SDHICLK1_MARK, TCK3_SWCLK_MC1_MARK, - SDHID1_0_MARK, M11_SLCD_SO2_MARK, TS_SPSYNC2_MARK, - TMS3_SWDIO_MC1_MARK, - SDHID1_1_MARK, M9_SLCD_A02_MARK, TS_SDAT2_MARK, TDO3_SWO0_MC1_MARK, - SDHID1_2_MARK, M10_SLCD_CK2_MARK, TS_SDEN2_MARK, TDI3_MARK, - SDHID1_3_MARK, M12_SLCD_CE2_MARK, TS_SCK2_MARK, RTCK3_SWO1_MC1_MARK, - SDHICMD1_MARK, TRST3_MARK, - RESETOUTS_MARK, - PINMUX_MARK_END, -}; - -static pinmux_enum_t pinmux_data[] = { - /* specify valid pin states for each pin in GPIO mode */ - /* 55-1 (GPIO) */ - PORT_DATA_I_PD(0), PORT_DATA_I_PU(1), - PORT_DATA_I_PU(2), PORT_DATA_I_PU(3), - PORT_DATA_I_PU(4), PORT_DATA_I_PU(5), - PORT_DATA_I_PU(6), PORT_DATA_I_PU(7), - PORT_DATA_I_PU(8), PORT_DATA_I_PU(9), - PORT_DATA_I_PU(10), PORT_DATA_I_PU(11), - PORT_DATA_IO_PU(12), PORT_DATA_IO_PU(13), - PORT_DATA_IO_PU_PD(14), PORT_DATA_IO_PU_PD(15), - PORT_DATA_O(16), PORT_DATA_IO(17), - PORT_DATA_O(18), PORT_DATA_O(19), - PORT_DATA_O(20), PORT_DATA_O(21), - PORT_DATA_O(22), PORT_DATA_O(23), - PORT_DATA_O(24), PORT_DATA_I_PD(25), - PORT_DATA_I_PD(26), PORT_DATA_O(27), - PORT_DATA_O(28), PORT_DATA_O(29), - PORT_DATA_IO(30), PORT_DATA_IO_PU(31), - PORT_DATA_IO_PD(32), PORT_DATA_I_PU(33), - PORT_DATA_IO_PD(34), PORT_DATA_I_PU_PD(35), - PORT_DATA_O(36), PORT_DATA_IO(37), - - /* 55-2 (GPIO) */ - PORT_DATA_O(38), PORT_DATA_I_PU(39), - PORT_DATA_I_PU_PD(40), PORT_DATA_O(41), - PORT_DATA_IO_PD(42), PORT_DATA_IO_PD(43), - PORT_DATA_IO_PD(44), PORT_DATA_I_PD(45), - PORT_DATA_I_PD(46), PORT_DATA_I_PD(47), - PORT_DATA_I_PD(48), PORT_DATA_IO_PU_PD(49), - PORT_DATA_IO_PD(50), PORT_DATA_IO_PD(51), - PORT_DATA_O(52), PORT_DATA_IO_PU_PD(53), - PORT_DATA_IO_PU_PD(54), PORT_DATA_IO_PD(55), - PORT_DATA_I_PU_PD(56), PORT_DATA_IO(57), - PORT_DATA_IO(58), PORT_DATA_IO(59), - PORT_DATA_IO(60), PORT_DATA_IO(61), - PORT_DATA_IO_PD(62), PORT_DATA_IO_PD(63), - PORT_DATA_IO_PD(64), PORT_DATA_IO_PD(65), - PORT_DATA_IO_PU_PD(66), PORT_DATA_IO_PU_PD(67), - PORT_DATA_IO_PU_PD(68), PORT_DATA_IO_PU_PD(69), - PORT_DATA_IO_PU_PD(70), PORT_DATA_IO_PU_PD(71), - PORT_DATA_IO_PU_PD(72), PORT_DATA_I_PU_PD(73), - PORT_DATA_IO_PU(74), PORT_DATA_IO_PU(75), - PORT_DATA_IO_PU(76), PORT_DATA_IO_PU(77), - PORT_DATA_IO_PU(78), PORT_DATA_IO_PU(79), - PORT_DATA_IO_PU(80), PORT_DATA_IO_PU(81), - PORT_DATA_IO_PU(82), PORT_DATA_IO_PU(83), - PORT_DATA_IO_PU(84), PORT_DATA_IO_PU(85), - PORT_DATA_IO_PU(86), PORT_DATA_IO_PU(87), - PORT_DATA_IO_PU(88), PORT_DATA_IO_PU(89), - PORT_DATA_O(90), PORT_DATA_IO_PU(91), - PORT_DATA_O(92), - - /* 55-3 (GPIO) */ - PORT_DATA_IO_PU(93), - PORT_DATA_O(94), - PORT_DATA_I_PU_PD(95), - PORT_DATA_IO(96), PORT_DATA_IO(97), - PORT_DATA_IO(98), PORT_DATA_I_PU(99), - PORT_DATA_O(100), PORT_DATA_O(101), - PORT_DATA_I_PU(102), PORT_DATA_IO_PD(103), - PORT_DATA_I_PD(104), PORT_DATA_I_PD(105), - PORT_DATA_I_PD(106), PORT_DATA_I_PD(107), - PORT_DATA_I_PD(108), PORT_DATA_IO_PD(109), - PORT_DATA_IO_PD(110), PORT_DATA_I_PD(111), - PORT_DATA_IO_PD(112), PORT_DATA_IO_PD(113), - PORT_DATA_IO_PD(114), PORT_DATA_I_PD(115), - PORT_DATA_I_PD(116), PORT_DATA_IO_PD(117), - PORT_DATA_I_PD(118), PORT_DATA_IO_PD(128), - PORT_DATA_IO_PD(129), PORT_DATA_IO_PD(130), - PORT_DATA_IO_PD(131), PORT_DATA_IO_PD(132), - PORT_DATA_IO_PD(133), PORT_DATA_IO_PU_PD(134), - PORT_DATA_IO_PU_PD(135), PORT_DATA_IO_PU_PD(136), - PORT_DATA_IO_PU_PD(137), PORT_DATA_IO_PD(138), - PORT_DATA_IO_PD(139), PORT_DATA_IO_PD(140), - PORT_DATA_IO_PD(141), PORT_DATA_IO_PD(142), - PORT_DATA_IO_PD(143), PORT_DATA_IO_PU_PD(144), - PORT_DATA_IO_PD(145), PORT_DATA_IO_PU_PD(146), - PORT_DATA_IO_PU_PD(147), PORT_DATA_IO_PU_PD(148), - PORT_DATA_IO_PU_PD(149), PORT_DATA_I_PD(150), - PORT_DATA_IO_PU_PD(151), PORT_DATA_IO_PD(152), - PORT_DATA_IO_PD(153), PORT_DATA_IO_PD(154), - PORT_DATA_I_PD(155), PORT_DATA_IO_PU_PD(156), - PORT_DATA_I_PD(157), PORT_DATA_IO_PD(158), - - /* 55-4 (GPIO) */ - PORT_DATA_IO_PU_PD(159), PORT_DATA_IO_PU_PD(160), - PORT_DATA_I_PU_PD(161), PORT_DATA_I_PU_PD(162), - PORT_DATA_IO_PU_PD(163), PORT_DATA_I_PU_PD(164), - PORT_DATA_IO_PD(192), PORT_DATA_IO_PD(193), - PORT_DATA_IO_PD(194), PORT_DATA_IO_PD(195), - PORT_DATA_IO_PD(196), PORT_DATA_IO_PD(197), - PORT_DATA_IO_PD(198), PORT_DATA_IO_PD(199), - PORT_DATA_IO_PU_PD(200), PORT_DATA_IO_PU_PD(201), - PORT_DATA_IO_PU_PD(202), PORT_DATA_IO_PU_PD(203), - PORT_DATA_IO_PU_PD(204), PORT_DATA_IO_PU_PD(205), - PORT_DATA_IO_PU_PD(206), PORT_DATA_IO_PD(207), - PORT_DATA_IO_PD(208), PORT_DATA_IO_PD(209), - PORT_DATA_IO_PD(210), PORT_DATA_IO_PD(211), - PORT_DATA_IO_PD(212), PORT_DATA_IO_PD(213), - PORT_DATA_IO_PD(214), PORT_DATA_IO_PD(215), - PORT_DATA_IO_PD(216), PORT_DATA_IO_PD(217), - PORT_DATA_O(218), PORT_DATA_IO_PD(219), - PORT_DATA_IO_PD(220), PORT_DATA_IO_PD(221), - PORT_DATA_IO_PU_PD(222), - PORT_DATA_I_PU_PD(223), PORT_DATA_I_PU_PD(224), - PORT_DATA_IO_PU_PD(225), PORT_DATA_O(226), - PORT_DATA_IO_PU_PD(227), PORT_DATA_I_PD(228), - PORT_DATA_I_PD(229), PORT_DATA_IO(230), - PORT_DATA_IO_PD(231), PORT_DATA_IO_PU_PD(232), - PORT_DATA_I_PD(233), PORT_DATA_IO_PU_PD(234), - PORT_DATA_IO_PU_PD(235), PORT_DATA_IO_PU_PD(236), - PORT_DATA_IO_PD(237), PORT_DATA_IO_PU_PD(238), - - /* 55-5 (GPIO) */ - PORT_DATA_IO_PU_PD(239), PORT_DATA_IO_PU_PD(240), - PORT_DATA_O(241), PORT_DATA_I_PD(242), - PORT_DATA_IO_PU_PD(243), PORT_DATA_IO_PU_PD(244), - PORT_DATA_IO_PU_PD(245), PORT_DATA_IO_PU_PD(246), - PORT_DATA_IO_PU_PD(247), PORT_DATA_IO_PU_PD(248), - PORT_DATA_IO_PU_PD(249), PORT_DATA_IO_PD(250), - PORT_DATA_IO_PU_PD(251), PORT_DATA_IO_PU_PD(252), - PORT_DATA_IO_PU_PD(253), PORT_DATA_IO_PU_PD(254), - PORT_DATA_IO_PU_PD(255), PORT_DATA_IO_PU_PD(256), - PORT_DATA_IO_PU_PD(257), PORT_DATA_IO_PD(258), - PORT_DATA_IO_PU_PD(259), PORT_DATA_IO_PU_PD(260), - PORT_DATA_IO_PU_PD(261), PORT_DATA_IO_PU_PD(262), - PORT_DATA_IO_PU_PD(263), - - /* Special Pull-up / Pull-down Functions */ - PINMUX_DATA(PORT66_KEYIN0_PU_MARK, MSELBCR_MSEL17_0, MSELBCR_MSEL16_0, - PORT66_FN2, PORT66_IN_PU), - PINMUX_DATA(PORT67_KEYIN1_PU_MARK, MSELBCR_MSEL17_0, MSELBCR_MSEL16_0, - PORT67_FN2, PORT67_IN_PU), - PINMUX_DATA(PORT68_KEYIN2_PU_MARK, MSELBCR_MSEL17_0, MSELBCR_MSEL16_0, - PORT68_FN2, PORT68_IN_PU), - PINMUX_DATA(PORT69_KEYIN3_PU_MARK, MSELBCR_MSEL17_0, MSELBCR_MSEL16_0, - PORT69_FN2, PORT69_IN_PU), - PINMUX_DATA(PORT70_KEYIN4_PU_MARK, MSELBCR_MSEL17_0, MSELBCR_MSEL16_0, - PORT70_FN2, PORT70_IN_PU), - PINMUX_DATA(PORT71_KEYIN5_PU_MARK, MSELBCR_MSEL17_0, MSELBCR_MSEL16_0, - PORT71_FN2, PORT71_IN_PU), - PINMUX_DATA(PORT72_KEYIN6_PU_MARK, MSELBCR_MSEL17_0, MSELBCR_MSEL16_0, - PORT72_FN2, PORT72_IN_PU), - - - /* 55-1 (FN) */ - PINMUX_DATA(VBUS_0_MARK, PORT0_FN1), - PINMUX_DATA(CPORT0_MARK, PORT1_FN1), - PINMUX_DATA(CPORT1_MARK, PORT2_FN1), - PINMUX_DATA(CPORT2_MARK, PORT3_FN1), - PINMUX_DATA(CPORT3_MARK, PORT4_FN1), - PINMUX_DATA(CPORT4_MARK, PORT5_FN1), - PINMUX_DATA(CPORT5_MARK, PORT6_FN1), - PINMUX_DATA(CPORT6_MARK, PORT7_FN1), - PINMUX_DATA(CPORT7_MARK, PORT8_FN1), - PINMUX_DATA(CPORT8_MARK, PORT9_FN1), - PINMUX_DATA(CPORT9_MARK, PORT10_FN1), - PINMUX_DATA(CPORT10_MARK, PORT11_FN1), - PINMUX_DATA(CPORT11_MARK, PORT12_FN1), - PINMUX_DATA(SIN2_MARK, PORT12_FN2), - PINMUX_DATA(CPORT12_MARK, PORT13_FN1), - PINMUX_DATA(XCTS2_MARK, PORT13_FN2), - PINMUX_DATA(CPORT13_MARK, PORT14_FN1), - PINMUX_DATA(RFSPO4_MARK, PORT14_FN2), - PINMUX_DATA(CPORT14_MARK, PORT15_FN1), - PINMUX_DATA(RFSPO5_MARK, PORT15_FN2), - PINMUX_DATA(CPORT15_MARK, PORT16_FN1), - PINMUX_DATA(SCIFA0_SCK_MARK, PORT16_FN2), - PINMUX_DATA(GPS_AGC2_MARK, PORT16_FN3), - PINMUX_DATA(CPORT16_MARK, PORT17_FN1), - PINMUX_DATA(SCIFA0_TXD_MARK, PORT17_FN2), - PINMUX_DATA(GPS_AGC3_MARK, PORT17_FN3), - PINMUX_DATA(CPORT17_IC_OE_MARK, PORT18_FN1), - PINMUX_DATA(SOUT2_MARK, PORT18_FN2), - PINMUX_DATA(CPORT18_MARK, PORT19_FN1), - PINMUX_DATA(XRTS2_MARK, PORT19_FN2), - PINMUX_DATA(PORT19_VIO_CKO2_MARK, PORT19_FN3), - PINMUX_DATA(CPORT19_MPORT1_MARK, PORT20_FN1), - PINMUX_DATA(CPORT20_MARK, PORT21_FN1), - PINMUX_DATA(RFSPO6_MARK, PORT21_FN2), - PINMUX_DATA(CPORT21_MARK, PORT22_FN1), - PINMUX_DATA(STATUS0_MARK, PORT22_FN2), - PINMUX_DATA(CPORT22_MARK, PORT23_FN1), - PINMUX_DATA(STATUS1_MARK, PORT23_FN2), - PINMUX_DATA(CPORT23_MARK, PORT24_FN1), - PINMUX_DATA(STATUS2_MARK, PORT24_FN2), - PINMUX_DATA(RFSPO7_MARK, PORT24_FN3), - PINMUX_DATA(B_SYNLD1_MARK, PORT25_FN1), - PINMUX_DATA(B_SYNLD2_MARK, PORT26_FN1), - PINMUX_DATA(SYSENMSK_MARK, PORT26_FN2), - PINMUX_DATA(XMAINPS_MARK, PORT27_FN1), - PINMUX_DATA(XDIVPS_MARK, PORT28_FN1), - PINMUX_DATA(XIDRST_MARK, PORT29_FN1), - PINMUX_DATA(IDCLK_MARK, PORT30_FN1), - PINMUX_DATA(IC_DP_MARK, PORT30_FN2), - PINMUX_DATA(IDIO_MARK, PORT31_FN1), - PINMUX_DATA(IC_DM_MARK, PORT31_FN2), - PINMUX_DATA(SOUT1_MARK, PORT32_FN1), - PINMUX_DATA(SCIFA4_TXD_MARK, PORT32_FN2), - PINMUX_DATA(M02_BERDAT_MARK, PORT32_FN3), - PINMUX_DATA(SIN1_MARK, PORT33_FN1), - PINMUX_DATA(SCIFA4_RXD_MARK, PORT33_FN2), - PINMUX_DATA(XWUP_MARK, PORT33_FN3), - PINMUX_DATA(XRTS1_MARK, PORT34_FN1), - PINMUX_DATA(SCIFA4_RTS_MARK, PORT34_FN2), - PINMUX_DATA(M03_BERCLK_MARK, PORT34_FN3), - PINMUX_DATA(XCTS1_MARK, PORT35_FN1), - PINMUX_DATA(SCIFA4_CTS_MARK, PORT35_FN2), - PINMUX_DATA(PCMCLKO_MARK, PORT36_FN1), - PINMUX_DATA(SYNC8KO_MARK, PORT37_FN1), - - /* 55-2 (FN) */ - PINMUX_DATA(DNPCM_A_MARK, PORT38_FN1), - PINMUX_DATA(UPPCM_A_MARK, PORT39_FN1), - PINMUX_DATA(VACK_MARK, PORT40_FN1), - PINMUX_DATA(XTALB1L_MARK, PORT41_FN1), - PINMUX_DATA(GPS_AGC1_MARK, PORT42_FN1), - PINMUX_DATA(SCIFA0_RTS_MARK, PORT42_FN2), - PINMUX_DATA(GPS_AGC4_MARK, PORT43_FN1), - PINMUX_DATA(SCIFA0_RXD_MARK, PORT43_FN2), - PINMUX_DATA(GPS_PWRDOWN_MARK, PORT44_FN1), - PINMUX_DATA(SCIFA0_CTS_MARK, PORT44_FN2), - PINMUX_DATA(GPS_IM_MARK, PORT45_FN1), - PINMUX_DATA(GPS_IS_MARK, PORT46_FN1), - PINMUX_DATA(GPS_QM_MARK, PORT47_FN1), - PINMUX_DATA(GPS_QS_MARK, PORT48_FN1), - PINMUX_DATA(FMSOCK_MARK, PORT49_FN1), - PINMUX_DATA(PORT49_IRDA_OUT_MARK, PORT49_FN2), - PINMUX_DATA(PORT49_IROUT_MARK, PORT49_FN3), - PINMUX_DATA(FMSOOLR_MARK, PORT50_FN1), - PINMUX_DATA(BBIF2_TSYNC2_MARK, PORT50_FN2), - PINMUX_DATA(TPU2TO2_MARK, PORT50_FN3), - PINMUX_DATA(IPORT3_MARK, PORT50_FN4), - PINMUX_DATA(FMSIOLR_MARK, PORT50_FN5), - PINMUX_DATA(FMSOOBT_MARK, PORT51_FN1), - PINMUX_DATA(BBIF2_TSCK2_MARK, PORT51_FN2), - PINMUX_DATA(TPU2TO3_MARK, PORT51_FN3), - PINMUX_DATA(OPORT1_MARK, PORT51_FN4), - PINMUX_DATA(FMSIOBT_MARK, PORT51_FN5), - PINMUX_DATA(FMSOSLD_MARK, PORT52_FN1), - PINMUX_DATA(BBIF2_TXD2_MARK, PORT52_FN2), - PINMUX_DATA(OPORT2_MARK, PORT52_FN3), - PINMUX_DATA(FMSOILR_MARK, PORT53_FN1), - PINMUX_DATA(PORT53_IRDA_IN_MARK, PORT53_FN2), - PINMUX_DATA(TPU3TO3_MARK, PORT53_FN3), - PINMUX_DATA(OPORT3_MARK, PORT53_FN4), - PINMUX_DATA(FMSIILR_MARK, PORT53_FN5), - PINMUX_DATA(FMSOIBT_MARK, PORT54_FN1), - PINMUX_DATA(PORT54_IRDA_FIRSEL_MARK, PORT54_FN2), - PINMUX_DATA(TPU3TO2_MARK, PORT54_FN3), - PINMUX_DATA(FMSIIBT_MARK, PORT54_FN4), - PINMUX_DATA(FMSISLD_MARK, PORT55_FN1), - PINMUX_DATA(MFG0_OUT1_MARK, PORT55_FN2), - PINMUX_DATA(TPU0TO0_MARK, PORT55_FN3), - PINMUX_DATA(A0_EA0_MARK, PORT57_FN1), - PINMUX_DATA(BS_MARK, PORT57_FN2), - PINMUX_DATA(A12_EA12_MARK, PORT58_FN1), - PINMUX_DATA(PORT58_VIO_CKOR_MARK, PORT58_FN2), - PINMUX_DATA(TPU4TO2_MARK, PORT58_FN3), - PINMUX_DATA(A13_EA13_MARK, PORT59_FN1), - PINMUX_DATA(PORT59_IROUT_MARK, PORT59_FN2), - PINMUX_DATA(MFG0_OUT2_MARK, PORT59_FN3), - PINMUX_DATA(TPU0TO1_MARK, PORT59_FN4), - PINMUX_DATA(A14_EA14_MARK, PORT60_FN1), - PINMUX_DATA(PORT60_KEYOUT5_MARK, PORT60_FN2), - PINMUX_DATA(A15_EA15_MARK, PORT61_FN1), - PINMUX_DATA(PORT61_KEYOUT4_MARK, PORT61_FN2), - PINMUX_DATA(A16_EA16_MARK, PORT62_FN1), - PINMUX_DATA(PORT62_KEYOUT3_MARK, PORT62_FN2), - PINMUX_DATA(MSIOF0_SS1_MARK, PORT62_FN3), - PINMUX_DATA(A17_EA17_MARK, PORT63_FN1), - PINMUX_DATA(PORT63_KEYOUT2_MARK, PORT63_FN2), - PINMUX_DATA(MSIOF0_TSYNC_MARK, PORT63_FN3), - PINMUX_DATA(A18_EA18_MARK, PORT64_FN1), - PINMUX_DATA(PORT64_KEYOUT1_MARK, PORT64_FN2), - PINMUX_DATA(MSIOF0_TSCK_MARK, PORT64_FN3), - PINMUX_DATA(A19_EA19_MARK, PORT65_FN1), - PINMUX_DATA(PORT65_KEYOUT0_MARK, PORT65_FN2), - PINMUX_DATA(MSIOF0_TXD_MARK, PORT65_FN3), - PINMUX_DATA(A20_EA20_MARK, PORT66_FN1), - PINMUX_DATA(PORT66_KEYIN0_MARK, PORT66_FN2), - PINMUX_DATA(MSIOF0_RSCK_MARK, PORT66_FN3), - PINMUX_DATA(A21_EA21_MARK, PORT67_FN1), - PINMUX_DATA(PORT67_KEYIN1_MARK, PORT67_FN2), - PINMUX_DATA(MSIOF0_RSYNC_MARK, PORT67_FN3), - PINMUX_DATA(A22_EA22_MARK, PORT68_FN1), - PINMUX_DATA(PORT68_KEYIN2_MARK, PORT68_FN2), - PINMUX_DATA(MSIOF0_MCK0_MARK, PORT68_FN3), - PINMUX_DATA(A23_EA23_MARK, PORT69_FN1), - PINMUX_DATA(PORT69_KEYIN3_MARK, PORT69_FN2), - PINMUX_DATA(MSIOF0_MCK1_MARK, PORT69_FN3), - PINMUX_DATA(A24_EA24_MARK, PORT70_FN1), - PINMUX_DATA(PORT70_KEYIN4_MARK, PORT70_FN2), - PINMUX_DATA(MSIOF0_RXD_MARK, PORT70_FN3), - PINMUX_DATA(A25_EA25_MARK, PORT71_FN1), - PINMUX_DATA(PORT71_KEYIN5_MARK, PORT71_FN2), - PINMUX_DATA(MSIOF0_SS2_MARK, PORT71_FN3), - PINMUX_DATA(A26_MARK, PORT72_FN1), - PINMUX_DATA(PORT72_KEYIN6_MARK, PORT72_FN2), - PINMUX_DATA(D0_ED0_NAF0_MARK, PORT74_FN1), - PINMUX_DATA(D1_ED1_NAF1_MARK, PORT75_FN1), - PINMUX_DATA(D2_ED2_NAF2_MARK, PORT76_FN1), - PINMUX_DATA(D3_ED3_NAF3_MARK, PORT77_FN1), - PINMUX_DATA(D4_ED4_NAF4_MARK, PORT78_FN1), - PINMUX_DATA(D5_ED5_NAF5_MARK, PORT79_FN1), - PINMUX_DATA(D6_ED6_NAF6_MARK, PORT80_FN1), - PINMUX_DATA(D7_ED7_NAF7_MARK, PORT81_FN1), - PINMUX_DATA(D8_ED8_NAF8_MARK, PORT82_FN1), - PINMUX_DATA(D9_ED9_NAF9_MARK, PORT83_FN1), - PINMUX_DATA(D10_ED10_NAF10_MARK, PORT84_FN1), - PINMUX_DATA(D11_ED11_NAF11_MARK, PORT85_FN1), - PINMUX_DATA(D12_ED12_NAF12_MARK, PORT86_FN1), - PINMUX_DATA(D13_ED13_NAF13_MARK, PORT87_FN1), - PINMUX_DATA(D14_ED14_NAF14_MARK, PORT88_FN1), - PINMUX_DATA(D15_ED15_NAF15_MARK, PORT89_FN1), - PINMUX_DATA(CS4_MARK, PORT90_FN1), - PINMUX_DATA(CS5A_MARK, PORT91_FN1), - PINMUX_DATA(FMSICK_MARK, PORT91_FN2), - PINMUX_DATA(CS5B_MARK, PORT92_FN1), - PINMUX_DATA(FCE1_MARK, PORT92_FN2), - - /* 55-3 (FN) */ - PINMUX_DATA(CS6B_MARK, PORT93_FN1), - PINMUX_DATA(XCS2_MARK, PORT93_FN2), - PINMUX_DATA(CS6A_MARK, PORT93_FN3), - PINMUX_DATA(DACK0_MARK, PORT93_FN4), - PINMUX_DATA(FCE0_MARK, PORT94_FN1), - PINMUX_DATA(WAIT_MARK, PORT95_FN1), - PINMUX_DATA(DREQ0_MARK, PORT95_FN2), - PINMUX_DATA(RD_XRD_MARK, PORT96_FN1), - PINMUX_DATA(WE0_XWR0_FWE_MARK, PORT97_FN1), - PINMUX_DATA(WE1_XWR1_MARK, PORT98_FN1), - PINMUX_DATA(FRB_MARK, PORT99_FN1), - PINMUX_DATA(CKO_MARK, PORT100_FN1), - PINMUX_DATA(NBRSTOUT_MARK, PORT101_FN1), - PINMUX_DATA(NBRST_MARK, PORT102_FN1), - PINMUX_DATA(GPS_EPPSIN_MARK, PORT106_FN1), - PINMUX_DATA(LATCHPULSE_MARK, PORT110_FN1), - PINMUX_DATA(LTESIGNAL_MARK, PORT111_FN1), - PINMUX_DATA(LEGACYSTATE_MARK, PORT112_FN1), - PINMUX_DATA(TCKON_MARK, PORT118_FN1), - PINMUX_DATA(VIO_VD_MARK, PORT128_FN1), - PINMUX_DATA(PORT128_KEYOUT0_MARK, PORT128_FN2), - PINMUX_DATA(IPORT0_MARK, PORT128_FN3), - PINMUX_DATA(VIO_HD_MARK, PORT129_FN1), - PINMUX_DATA(PORT129_KEYOUT1_MARK, PORT129_FN2), - PINMUX_DATA(IPORT1_MARK, PORT129_FN3), - PINMUX_DATA(VIO_D0_MARK, PORT130_FN1), - PINMUX_DATA(PORT130_KEYOUT2_MARK, PORT130_FN2), - PINMUX_DATA(PORT130_MSIOF2_RXD_MARK, PORT130_FN3), - PINMUX_DATA(VIO_D1_MARK, PORT131_FN1), - PINMUX_DATA(PORT131_KEYOUT3_MARK, PORT131_FN2), - PINMUX_DATA(PORT131_MSIOF2_SS1_MARK, PORT131_FN3), - PINMUX_DATA(VIO_D2_MARK, PORT132_FN1), - PINMUX_DATA(PORT132_KEYOUT4_MARK, PORT132_FN2), - PINMUX_DATA(PORT132_MSIOF2_SS2_MARK, PORT132_FN3), - PINMUX_DATA(VIO_D3_MARK, PORT133_FN1), - PINMUX_DATA(PORT133_KEYOUT5_MARK, PORT133_FN2), - PINMUX_DATA(PORT133_MSIOF2_TSYNC_MARK, PORT133_FN3), - PINMUX_DATA(VIO_D4_MARK, PORT134_FN1), - PINMUX_DATA(PORT134_KEYIN0_MARK, PORT134_FN2), - PINMUX_DATA(PORT134_MSIOF2_TXD_MARK, PORT134_FN3), - PINMUX_DATA(VIO_D5_MARK, PORT135_FN1), - PINMUX_DATA(PORT135_KEYIN1_MARK, PORT135_FN2), - PINMUX_DATA(PORT135_MSIOF2_TSCK_MARK, PORT135_FN3), - PINMUX_DATA(VIO_D6_MARK, PORT136_FN1), - PINMUX_DATA(PORT136_KEYIN2_MARK, PORT136_FN2), - PINMUX_DATA(VIO_D7_MARK, PORT137_FN1), - PINMUX_DATA(PORT137_KEYIN3_MARK, PORT137_FN2), - PINMUX_DATA(VIO_D8_MARK, PORT138_FN1), - PINMUX_DATA(M9_SLCD_A01_MARK, PORT138_FN2), - PINMUX_DATA(PORT138_FSIAOMC_MARK, PORT138_FN3), - PINMUX_DATA(VIO_D9_MARK, PORT139_FN1), - PINMUX_DATA(M10_SLCD_CK1_MARK, PORT139_FN2), - PINMUX_DATA(PORT139_FSIAOLR_MARK, PORT139_FN3), - PINMUX_DATA(VIO_D10_MARK, PORT140_FN1), - PINMUX_DATA(M11_SLCD_SO1_MARK, PORT140_FN2), - PINMUX_DATA(TPU0TO2_MARK, PORT140_FN3), - PINMUX_DATA(PORT140_FSIAOBT_MARK, PORT140_FN4), - PINMUX_DATA(VIO_D11_MARK, PORT141_FN1), - PINMUX_DATA(M12_SLCD_CE1_MARK, PORT141_FN2), - PINMUX_DATA(TPU0TO3_MARK, PORT141_FN3), - PINMUX_DATA(PORT141_FSIAOSLD_MARK, PORT141_FN4), - PINMUX_DATA(VIO_D12_MARK, PORT142_FN1), - PINMUX_DATA(M13_BSW_MARK, PORT142_FN2), - PINMUX_DATA(PORT142_FSIACK_MARK, PORT142_FN3), - PINMUX_DATA(VIO_D13_MARK, PORT143_FN1), - PINMUX_DATA(M14_GSW_MARK, PORT143_FN2), - PINMUX_DATA(PORT143_FSIAILR_MARK, PORT143_FN3), - PINMUX_DATA(VIO_D14_MARK, PORT144_FN1), - PINMUX_DATA(M15_RSW_MARK, PORT144_FN2), - PINMUX_DATA(PORT144_FSIAIBT_MARK, PORT144_FN3), - PINMUX_DATA(VIO_D15_MARK, PORT145_FN1), - PINMUX_DATA(TPU1TO3_MARK, PORT145_FN2), - PINMUX_DATA(PORT145_FSIAISLD_MARK, PORT145_FN3), - PINMUX_DATA(VIO_CLK_MARK, PORT146_FN1), - PINMUX_DATA(PORT146_KEYIN4_MARK, PORT146_FN2), - PINMUX_DATA(IPORT2_MARK, PORT146_FN3), - PINMUX_DATA(VIO_FIELD_MARK, PORT147_FN1), - PINMUX_DATA(PORT147_KEYIN5_MARK, PORT147_FN2), - PINMUX_DATA(VIO_CKO_MARK, PORT148_FN1), - PINMUX_DATA(PORT148_KEYIN6_MARK, PORT148_FN2), - PINMUX_DATA(A27_MARK, PORT149_FN1), - PINMUX_DATA(RDWR_XWE_MARK, PORT149_FN2), - PINMUX_DATA(MFG0_IN1_MARK, PORT149_FN3), - PINMUX_DATA(MFG0_IN2_MARK, PORT150_FN1), - PINMUX_DATA(TS_SPSYNC3_MARK, PORT151_FN1), - PINMUX_DATA(MSIOF2_RSCK_MARK, PORT151_FN2), - PINMUX_DATA(TS_SDAT3_MARK, PORT152_FN1), - PINMUX_DATA(MSIOF2_RSYNC_MARK, PORT152_FN2), - PINMUX_DATA(TPU1TO2_MARK, PORT153_FN1), - PINMUX_DATA(TS_SDEN3_MARK, PORT153_FN2), - PINMUX_DATA(PORT153_MSIOF2_SS1_MARK, PORT153_FN3), - PINMUX_DATA(SOUT3_MARK, PORT154_FN1), - PINMUX_DATA(SCIFA2_TXD1_MARK, PORT154_FN2), - PINMUX_DATA(MSIOF2_MCK0_MARK, PORT154_FN3), - PINMUX_DATA(SIN3_MARK, PORT155_FN1), - PINMUX_DATA(SCIFA2_RXD1_MARK, PORT155_FN2), - PINMUX_DATA(MSIOF2_MCK1_MARK, PORT155_FN3), - PINMUX_DATA(XRTS3_MARK, PORT156_FN1), - PINMUX_DATA(SCIFA2_RTS1_MARK, PORT156_FN2), - PINMUX_DATA(PORT156_MSIOF2_SS2_MARK, PORT156_FN3), - PINMUX_DATA(XCTS3_MARK, PORT157_FN1), - PINMUX_DATA(SCIFA2_CTS1_MARK, PORT157_FN2), - PINMUX_DATA(PORT157_MSIOF2_RXD_MARK, PORT157_FN3), - - /* 55-4 (FN) */ - PINMUX_DATA(DINT_MARK, PORT158_FN1), - PINMUX_DATA(SCIFA2_SCK1_MARK, PORT158_FN2), - PINMUX_DATA(TS_SCK3_MARK, PORT158_FN3), - PINMUX_DATA(PORT159_SCIFB_SCK_MARK, PORT159_FN1), - PINMUX_DATA(PORT159_SCIFA5_SCK_MARK, PORT159_FN2), - PINMUX_DATA(NMI_MARK, PORT159_FN3), - PINMUX_DATA(PORT160_SCIFB_TXD_MARK, PORT160_FN1), - PINMUX_DATA(PORT160_SCIFA5_TXD_MARK, PORT160_FN2), - PINMUX_DATA(SOUT0_MARK, PORT160_FN3), - PINMUX_DATA(PORT161_SCIFB_CTS_MARK, PORT161_FN1), - PINMUX_DATA(PORT161_SCIFA5_CTS_MARK, PORT161_FN2), - PINMUX_DATA(XCTS0_MARK, PORT161_FN3), - PINMUX_DATA(MFG3_IN2_MARK, PORT161_FN4), - PINMUX_DATA(PORT162_SCIFB_RXD_MARK, PORT162_FN1), - PINMUX_DATA(PORT162_SCIFA5_RXD_MARK, PORT162_FN2), - PINMUX_DATA(SIN0_MARK, PORT162_FN3), - PINMUX_DATA(MFG3_IN1_MARK, PORT162_FN4), - PINMUX_DATA(PORT163_SCIFB_RTS_MARK, PORT163_FN1), - PINMUX_DATA(PORT163_SCIFA5_RTS_MARK, PORT163_FN2), - PINMUX_DATA(XRTS0_MARK, PORT163_FN3), - PINMUX_DATA(MFG3_OUT1_MARK, PORT163_FN4), - PINMUX_DATA(TPU3TO0_MARK, PORT163_FN5), - PINMUX_DATA(LCDD0_MARK, PORT192_FN1), - PINMUX_DATA(PORT192_KEYOUT0_MARK, PORT192_FN2), - PINMUX_DATA(EXT_CKI_MARK, PORT192_FN3), - PINMUX_DATA(LCDD1_MARK, PORT193_FN1), - PINMUX_DATA(PORT193_KEYOUT1_MARK, PORT193_FN2), - PINMUX_DATA(PORT193_SCIFA5_CTS_MARK, PORT193_FN3), - PINMUX_DATA(BBIF2_TSYNC1_MARK, PORT193_FN4), - PINMUX_DATA(LCDD2_MARK, PORT194_FN1), - PINMUX_DATA(PORT194_KEYOUT2_MARK, PORT194_FN2), - PINMUX_DATA(PORT194_SCIFA5_RTS_MARK, PORT194_FN3), - PINMUX_DATA(BBIF2_TSCK1_MARK, PORT194_FN4), - PINMUX_DATA(LCDD3_MARK, PORT195_FN1), - PINMUX_DATA(PORT195_KEYOUT3_MARK, PORT195_FN2), - PINMUX_DATA(PORT195_SCIFA5_RXD_MARK, PORT195_FN3), - PINMUX_DATA(BBIF2_TXD1_MARK, PORT195_FN4), - PINMUX_DATA(LCDD4_MARK, PORT196_FN1), - PINMUX_DATA(PORT196_KEYOUT4_MARK, PORT196_FN2), - PINMUX_DATA(PORT196_SCIFA5_TXD_MARK, PORT196_FN3), - PINMUX_DATA(LCDD5_MARK, PORT197_FN1), - PINMUX_DATA(PORT197_KEYOUT5_MARK, PORT197_FN2), - PINMUX_DATA(PORT197_SCIFA5_SCK_MARK, PORT197_FN3), - PINMUX_DATA(MFG2_OUT2_MARK, PORT197_FN4), - PINMUX_DATA(LCDD6_MARK, PORT198_FN1), - PINMUX_DATA(LCDD7_MARK, PORT199_FN1), - PINMUX_DATA(TPU4TO1_MARK, PORT199_FN2), - PINMUX_DATA(MFG4_OUT2_MARK, PORT199_FN3), - PINMUX_DATA(LCDD8_MARK, PORT200_FN1), - PINMUX_DATA(PORT200_KEYIN0_MARK, PORT200_FN2), - PINMUX_DATA(VIO_DR0_MARK, PORT200_FN3), - PINMUX_DATA(D16_MARK, PORT200_FN4), - PINMUX_DATA(LCDD9_MARK, PORT201_FN1), - PINMUX_DATA(PORT201_KEYIN1_MARK, PORT201_FN2), - PINMUX_DATA(VIO_DR1_MARK, PORT201_FN3), - PINMUX_DATA(D17_MARK, PORT201_FN4), - PINMUX_DATA(LCDD10_MARK, PORT202_FN1), - PINMUX_DATA(PORT202_KEYIN2_MARK, PORT202_FN2), - PINMUX_DATA(VIO_DR2_MARK, PORT202_FN3), - PINMUX_DATA(D18_MARK, PORT202_FN4), - PINMUX_DATA(LCDD11_MARK, PORT203_FN1), - PINMUX_DATA(PORT203_KEYIN3_MARK, PORT203_FN2), - PINMUX_DATA(VIO_DR3_MARK, PORT203_FN3), - PINMUX_DATA(D19_MARK, PORT203_FN4), - PINMUX_DATA(LCDD12_MARK, PORT204_FN1), - PINMUX_DATA(PORT204_KEYIN4_MARK, PORT204_FN2), - PINMUX_DATA(VIO_DR4_MARK, PORT204_FN3), - PINMUX_DATA(D20_MARK, PORT204_FN4), - PINMUX_DATA(LCDD13_MARK, PORT205_FN1), - PINMUX_DATA(PORT205_KEYIN5_MARK, PORT205_FN2), - PINMUX_DATA(VIO_DR5_MARK, PORT205_FN3), - PINMUX_DATA(D21_MARK, PORT205_FN4), - PINMUX_DATA(LCDD14_MARK, PORT206_FN1), - PINMUX_DATA(PORT206_KEYIN6_MARK, PORT206_FN2), - PINMUX_DATA(VIO_DR6_MARK, PORT206_FN3), - PINMUX_DATA(D22_MARK, PORT206_FN4), - PINMUX_DATA(LCDD15_MARK, PORT207_FN1), - PINMUX_DATA(PORT207_MSIOF0L_SS1_MARK, PORT207_FN2), - PINMUX_DATA(PORT207_KEYOUT0_MARK, PORT207_FN3), - PINMUX_DATA(VIO_DR7_MARK, PORT207_FN4), - PINMUX_DATA(D23_MARK, PORT207_FN5), - PINMUX_DATA(LCDD16_MARK, PORT208_FN1), - PINMUX_DATA(PORT208_MSIOF0L_SS2_MARK, PORT208_FN2), - PINMUX_DATA(PORT208_KEYOUT1_MARK, PORT208_FN3), - PINMUX_DATA(VIO_VDR_MARK, PORT208_FN4), - PINMUX_DATA(D24_MARK, PORT208_FN5), - PINMUX_DATA(LCDD17_MARK, PORT209_FN1), - PINMUX_DATA(PORT209_KEYOUT2_MARK, PORT209_FN2), - PINMUX_DATA(VIO_HDR_MARK, PORT209_FN3), - PINMUX_DATA(D25_MARK, PORT209_FN4), - PINMUX_DATA(LCDD18_MARK, PORT210_FN1), - PINMUX_DATA(DREQ2_MARK, PORT210_FN2), - PINMUX_DATA(PORT210_MSIOF0L_SS1_MARK, PORT210_FN3), - PINMUX_DATA(D26_MARK, PORT210_FN4), - PINMUX_DATA(LCDD19_MARK, PORT211_FN1), - PINMUX_DATA(PORT211_MSIOF0L_SS2_MARK, PORT211_FN2), - PINMUX_DATA(D27_MARK, PORT211_FN3), - PINMUX_DATA(LCDD20_MARK, PORT212_FN1), - PINMUX_DATA(TS_SPSYNC1_MARK, PORT212_FN2), - PINMUX_DATA(MSIOF0L_MCK0_MARK, PORT212_FN3), - PINMUX_DATA(D28_MARK, PORT212_FN4), - PINMUX_DATA(LCDD21_MARK, PORT213_FN1), - PINMUX_DATA(TS_SDAT1_MARK, PORT213_FN2), - PINMUX_DATA(MSIOF0L_MCK1_MARK, PORT213_FN3), - PINMUX_DATA(D29_MARK, PORT213_FN4), - PINMUX_DATA(LCDD22_MARK, PORT214_FN1), - PINMUX_DATA(TS_SDEN1_MARK, PORT214_FN2), - PINMUX_DATA(MSIOF0L_RSCK_MARK, PORT214_FN3), - PINMUX_DATA(D30_MARK, PORT214_FN4), - PINMUX_DATA(LCDD23_MARK, PORT215_FN1), - PINMUX_DATA(TS_SCK1_MARK, PORT215_FN2), - PINMUX_DATA(MSIOF0L_RSYNC_MARK, PORT215_FN3), - PINMUX_DATA(D31_MARK, PORT215_FN4), - PINMUX_DATA(LCDDCK_MARK, PORT216_FN1), - PINMUX_DATA(LCDWR_MARK, PORT216_FN2), - PINMUX_DATA(PORT216_KEYOUT3_MARK, PORT216_FN3), - PINMUX_DATA(VIO_CLKR_MARK, PORT216_FN4), - PINMUX_DATA(LCDRD_MARK, PORT217_FN1), - PINMUX_DATA(DACK2_MARK, PORT217_FN2), - PINMUX_DATA(MSIOF0L_TSYNC_MARK, PORT217_FN3), - PINMUX_DATA(LCDHSYN_MARK, PORT218_FN1), - PINMUX_DATA(LCDCS_MARK, PORT218_FN2), - PINMUX_DATA(LCDCS2_MARK, PORT218_FN3), - PINMUX_DATA(DACK3_MARK, PORT218_FN4), - PINMUX_DATA(PORT218_VIO_CKOR_MARK, PORT218_FN5), - PINMUX_DATA(PORT218_KEYOUT4_MARK, PORT218_FN6), - PINMUX_DATA(LCDDISP_MARK, PORT219_FN1), - PINMUX_DATA(LCDRS_MARK, PORT219_FN2), - PINMUX_DATA(DREQ3_MARK, PORT219_FN3), - PINMUX_DATA(MSIOF0L_TSCK_MARK, PORT219_FN4), - PINMUX_DATA(LCDVSYN_MARK, PORT220_FN1), - PINMUX_DATA(LCDVSYN2_MARK, PORT220_FN2), - PINMUX_DATA(PORT220_KEYOUT5_MARK, PORT220_FN3), - PINMUX_DATA(LCDLCLK_MARK, PORT221_FN1), - PINMUX_DATA(DREQ1_MARK, PORT221_FN2), - PINMUX_DATA(PWEN_MARK, PORT221_FN3), - PINMUX_DATA(MSIOF0L_RXD_MARK, PORT221_FN4), - PINMUX_DATA(LCDDON_MARK, PORT222_FN1), - PINMUX_DATA(LCDDON2_MARK, PORT222_FN2), - PINMUX_DATA(DACK1_MARK, PORT222_FN3), - PINMUX_DATA(OVCN_MARK, PORT222_FN4), - PINMUX_DATA(MSIOF0L_TXD_MARK, PORT222_FN5), - PINMUX_DATA(SCIFA1_TXD_MARK, PORT225_FN1), - PINMUX_DATA(OVCN2_MARK, PORT225_FN2), - PINMUX_DATA(EXTLP_MARK, PORT226_FN1), - PINMUX_DATA(SCIFA1_SCK_MARK, PORT226_FN2), - PINMUX_DATA(USBTERM_MARK, PORT226_FN3), - PINMUX_DATA(PORT226_VIO_CKO2_MARK, PORT226_FN4), - PINMUX_DATA(SCIFA1_RTS_MARK, PORT227_FN1), - PINMUX_DATA(IDIN_MARK, PORT227_FN2), - PINMUX_DATA(SCIFA1_RXD_MARK, PORT228_FN1), - PINMUX_DATA(SCIFA1_CTS_MARK, PORT229_FN1), - PINMUX_DATA(MFG1_IN1_MARK, PORT229_FN2), - PINMUX_DATA(MSIOF1_TXD_MARK, PORT230_FN1), - PINMUX_DATA(SCIFA2_TXD2_MARK, PORT230_FN2), - PINMUX_DATA(PORT230_FSIAOMC_MARK, PORT230_FN3), - PINMUX_DATA(MSIOF1_TSYNC_MARK, PORT231_FN1), - PINMUX_DATA(SCIFA2_CTS2_MARK, PORT231_FN2), - PINMUX_DATA(PORT231_FSIAOLR_MARK, PORT231_FN3), - PINMUX_DATA(MSIOF1_TSCK_MARK, PORT232_FN1), - PINMUX_DATA(SCIFA2_SCK2_MARK, PORT232_FN2), - PINMUX_DATA(PORT232_FSIAOBT_MARK, PORT232_FN3), - PINMUX_DATA(MSIOF1_RXD_MARK, PORT233_FN1), - PINMUX_DATA(SCIFA2_RXD2_MARK, PORT233_FN2), - PINMUX_DATA(GPS_VCOTRIG_MARK, PORT233_FN3), - PINMUX_DATA(PORT233_FSIACK_MARK, PORT233_FN4), - PINMUX_DATA(MSIOF1_RSCK_MARK, PORT234_FN1), - PINMUX_DATA(SCIFA2_RTS2_MARK, PORT234_FN2), - PINMUX_DATA(PORT234_FSIAOSLD_MARK, PORT234_FN3), - PINMUX_DATA(MSIOF1_RSYNC_MARK, PORT235_FN1), - PINMUX_DATA(OPORT0_MARK, PORT235_FN2), - PINMUX_DATA(MFG1_IN2_MARK, PORT235_FN3), - PINMUX_DATA(PORT235_FSIAILR_MARK, PORT235_FN4), - PINMUX_DATA(MSIOF1_MCK0_MARK, PORT236_FN1), - PINMUX_DATA(I2C_SDA2_MARK, PORT236_FN2), - PINMUX_DATA(PORT236_FSIAIBT_MARK, PORT236_FN3), - PINMUX_DATA(MSIOF1_MCK1_MARK, PORT237_FN1), - PINMUX_DATA(I2C_SCL2_MARK, PORT237_FN2), - PINMUX_DATA(PORT237_FSIAISLD_MARK, PORT237_FN3), - PINMUX_DATA(MSIOF1_SS1_MARK, PORT238_FN1), - PINMUX_DATA(EDBGREQ3_MARK, PORT238_FN2), - - /* 55-5 (FN) */ - PINMUX_DATA(MSIOF1_SS2_MARK, PORT239_FN1), - PINMUX_DATA(SCIFA6_TXD_MARK, PORT240_FN1), - PINMUX_DATA(PORT241_IRDA_OUT_MARK, PORT241_FN1), - PINMUX_DATA(PORT241_IROUT_MARK, PORT241_FN2), - PINMUX_DATA(MFG4_OUT1_MARK, PORT241_FN3), - PINMUX_DATA(TPU4TO0_MARK, PORT241_FN4), - PINMUX_DATA(PORT242_IRDA_IN_MARK, PORT242_FN1), - PINMUX_DATA(MFG4_IN2_MARK, PORT242_FN2), - PINMUX_DATA(PORT243_IRDA_FIRSEL_MARK, PORT243_FN1), - PINMUX_DATA(PORT243_VIO_CKO2_MARK, PORT243_FN2), - PINMUX_DATA(PORT244_SCIFA5_CTS_MARK, PORT244_FN1), - PINMUX_DATA(MFG2_IN1_MARK, PORT244_FN2), - PINMUX_DATA(PORT244_SCIFB_CTS_MARK, PORT244_FN3), - PINMUX_DATA(PORT245_SCIFA5_RTS_MARK, PORT245_FN1), - PINMUX_DATA(MFG2_IN2_MARK, PORT245_FN2), - PINMUX_DATA(PORT245_SCIFB_RTS_MARK, PORT245_FN3), - PINMUX_DATA(PORT246_SCIFA5_RXD_MARK, PORT246_FN1), - PINMUX_DATA(MFG1_OUT1_MARK, PORT246_FN2), - PINMUX_DATA(PORT246_SCIFB_RXD_MARK, PORT246_FN3), - PINMUX_DATA(TPU1TO0_MARK, PORT246_FN4), - PINMUX_DATA(PORT247_SCIFA5_TXD_MARK, PORT247_FN1), - PINMUX_DATA(MFG3_OUT2_MARK, PORT247_FN2), - PINMUX_DATA(PORT247_SCIFB_TXD_MARK, PORT247_FN3), - PINMUX_DATA(TPU3TO1_MARK, PORT247_FN4), - PINMUX_DATA(PORT248_SCIFA5_SCK_MARK, PORT248_FN1), - PINMUX_DATA(MFG2_OUT1_MARK, PORT248_FN2), - PINMUX_DATA(PORT248_SCIFB_SCK_MARK, PORT248_FN3), - PINMUX_DATA(TPU2TO0_MARK, PORT248_FN4), - PINMUX_DATA(PORT249_IROUT_MARK, PORT249_FN1), - PINMUX_DATA(MFG4_IN1_MARK, PORT249_FN2), - PINMUX_DATA(SDHICLK0_MARK, PORT250_FN1), - PINMUX_DATA(TCK2_SWCLK_MC0_MARK, PORT250_FN2), - PINMUX_DATA(SDHICD0_MARK, PORT251_FN1), - PINMUX_DATA(SDHID0_0_MARK, PORT252_FN1), - PINMUX_DATA(TMS2_SWDIO_MC0_MARK, PORT252_FN2), - PINMUX_DATA(SDHID0_1_MARK, PORT253_FN1), - PINMUX_DATA(TDO2_SWO0_MC0_MARK, PORT253_FN2), - PINMUX_DATA(SDHID0_2_MARK, PORT254_FN1), - PINMUX_DATA(TDI2_MARK, PORT254_FN2), - PINMUX_DATA(SDHID0_3_MARK, PORT255_FN1), - PINMUX_DATA(RTCK2_SWO1_MC0_MARK, PORT255_FN2), - PINMUX_DATA(SDHICMD0_MARK, PORT256_FN1), - PINMUX_DATA(TRST2_MARK, PORT256_FN2), - PINMUX_DATA(SDHIWP0_MARK, PORT257_FN1), - PINMUX_DATA(EDBGREQ2_MARK, PORT257_FN2), - PINMUX_DATA(SDHICLK1_MARK, PORT258_FN1), - PINMUX_DATA(TCK3_SWCLK_MC1_MARK, PORT258_FN2), - PINMUX_DATA(SDHID1_0_MARK, PORT259_FN1), - PINMUX_DATA(M11_SLCD_SO2_MARK, PORT259_FN2), - PINMUX_DATA(TS_SPSYNC2_MARK, PORT259_FN3), - PINMUX_DATA(TMS3_SWDIO_MC1_MARK, PORT259_FN4), - PINMUX_DATA(SDHID1_1_MARK, PORT260_FN1), - PINMUX_DATA(M9_SLCD_A02_MARK, PORT260_FN2), - PINMUX_DATA(TS_SDAT2_MARK, PORT260_FN3), - PINMUX_DATA(TDO3_SWO0_MC1_MARK, PORT260_FN4), - PINMUX_DATA(SDHID1_2_MARK, PORT261_FN1), - PINMUX_DATA(M10_SLCD_CK2_MARK, PORT261_FN2), - PINMUX_DATA(TS_SDEN2_MARK, PORT261_FN3), - PINMUX_DATA(TDI3_MARK, PORT261_FN4), - PINMUX_DATA(SDHID1_3_MARK, PORT262_FN1), - PINMUX_DATA(M12_SLCD_CE2_MARK, PORT262_FN2), - PINMUX_DATA(TS_SCK2_MARK, PORT262_FN3), - PINMUX_DATA(RTCK3_SWO1_MC1_MARK, PORT262_FN4), - PINMUX_DATA(SDHICMD1_MARK, PORT263_FN1), - PINMUX_DATA(TRST3_MARK, PORT263_FN2), - PINMUX_DATA(RESETOUTS_MARK, PORT264_FN1), -}; - -static struct pinmux_gpio pinmux_gpios[] = { - /* 55-1 -> 55-5 (GPIO) */ - GPIO_PORT_ALL(), - - /* Special Pull-up / Pull-down Functions */ - GPIO_FN(PORT66_KEYIN0_PU), GPIO_FN(PORT67_KEYIN1_PU), - GPIO_FN(PORT68_KEYIN2_PU), GPIO_FN(PORT69_KEYIN3_PU), - GPIO_FN(PORT70_KEYIN4_PU), GPIO_FN(PORT71_KEYIN5_PU), - GPIO_FN(PORT72_KEYIN6_PU), - - /* 55-1 (FN) */ - GPIO_FN(VBUS_0), - GPIO_FN(CPORT0), - GPIO_FN(CPORT1), - GPIO_FN(CPORT2), - GPIO_FN(CPORT3), - GPIO_FN(CPORT4), - GPIO_FN(CPORT5), - GPIO_FN(CPORT6), - GPIO_FN(CPORT7), - GPIO_FN(CPORT8), - GPIO_FN(CPORT9), - GPIO_FN(CPORT10), - GPIO_FN(CPORT11), GPIO_FN(SIN2), - GPIO_FN(CPORT12), GPIO_FN(XCTS2), - GPIO_FN(CPORT13), GPIO_FN(RFSPO4), - GPIO_FN(CPORT14), GPIO_FN(RFSPO5), - GPIO_FN(CPORT15), GPIO_FN(SCIFA0_SCK), GPIO_FN(GPS_AGC2), - GPIO_FN(CPORT16), GPIO_FN(SCIFA0_TXD), GPIO_FN(GPS_AGC3), - GPIO_FN(CPORT17_IC_OE), GPIO_FN(SOUT2), - GPIO_FN(CPORT18), GPIO_FN(XRTS2), GPIO_FN(PORT19_VIO_CKO2), - GPIO_FN(CPORT19_MPORT1), - GPIO_FN(CPORT20), GPIO_FN(RFSPO6), - GPIO_FN(CPORT21), GPIO_FN(STATUS0), - GPIO_FN(CPORT22), GPIO_FN(STATUS1), - GPIO_FN(CPORT23), GPIO_FN(STATUS2), GPIO_FN(RFSPO7), - GPIO_FN(B_SYNLD1), - GPIO_FN(B_SYNLD2), GPIO_FN(SYSENMSK), - GPIO_FN(XMAINPS), - GPIO_FN(XDIVPS), - GPIO_FN(XIDRST), - GPIO_FN(IDCLK), GPIO_FN(IC_DP), - GPIO_FN(IDIO), GPIO_FN(IC_DM), - GPIO_FN(SOUT1), GPIO_FN(SCIFA4_TXD), GPIO_FN(M02_BERDAT), - GPIO_FN(SIN1), GPIO_FN(SCIFA4_RXD), GPIO_FN(XWUP), - GPIO_FN(XRTS1), GPIO_FN(SCIFA4_RTS), GPIO_FN(M03_BERCLK), - GPIO_FN(XCTS1), GPIO_FN(SCIFA4_CTS), - GPIO_FN(PCMCLKO), - GPIO_FN(SYNC8KO), - - /* 55-2 (FN) */ - GPIO_FN(DNPCM_A), - GPIO_FN(UPPCM_A), - GPIO_FN(VACK), - GPIO_FN(XTALB1L), - GPIO_FN(GPS_AGC1), GPIO_FN(SCIFA0_RTS), - GPIO_FN(GPS_AGC4), GPIO_FN(SCIFA0_RXD), - GPIO_FN(GPS_PWRDOWN), GPIO_FN(SCIFA0_CTS), - GPIO_FN(GPS_IM), - GPIO_FN(GPS_IS), - GPIO_FN(GPS_QM), - GPIO_FN(GPS_QS), - GPIO_FN(FMSOCK), GPIO_FN(PORT49_IRDA_OUT), GPIO_FN(PORT49_IROUT), - GPIO_FN(FMSOOLR), GPIO_FN(BBIF2_TSYNC2), GPIO_FN(TPU2TO2), - GPIO_FN(IPORT3), GPIO_FN(FMSIOLR), - GPIO_FN(FMSOOBT), GPIO_FN(BBIF2_TSCK2), GPIO_FN(TPU2TO3), - GPIO_FN(OPORT1), GPIO_FN(FMSIOBT), - GPIO_FN(FMSOSLD), GPIO_FN(BBIF2_TXD2), GPIO_FN(OPORT2), - GPIO_FN(FMSOILR), GPIO_FN(PORT53_IRDA_IN), GPIO_FN(TPU3TO3), - GPIO_FN(OPORT3), GPIO_FN(FMSIILR), - GPIO_FN(FMSOIBT), GPIO_FN(PORT54_IRDA_FIRSEL), GPIO_FN(TPU3TO2), - GPIO_FN(FMSIIBT), - GPIO_FN(FMSISLD), GPIO_FN(MFG0_OUT1), GPIO_FN(TPU0TO0), - GPIO_FN(A0_EA0), GPIO_FN(BS), - GPIO_FN(A12_EA12), GPIO_FN(PORT58_VIO_CKOR), GPIO_FN(TPU4TO2), - GPIO_FN(A13_EA13), GPIO_FN(PORT59_IROUT), GPIO_FN(MFG0_OUT2), - GPIO_FN(TPU0TO1), - GPIO_FN(A14_EA14), GPIO_FN(PORT60_KEYOUT5), - GPIO_FN(A15_EA15), GPIO_FN(PORT61_KEYOUT4), - GPIO_FN(A16_EA16), GPIO_FN(PORT62_KEYOUT3), GPIO_FN(MSIOF0_SS1), - GPIO_FN(A17_EA17), GPIO_FN(PORT63_KEYOUT2), GPIO_FN(MSIOF0_TSYNC), - GPIO_FN(A18_EA18), GPIO_FN(PORT64_KEYOUT1), GPIO_FN(MSIOF0_TSCK), - GPIO_FN(A19_EA19), GPIO_FN(PORT65_KEYOUT0), GPIO_FN(MSIOF0_TXD), - GPIO_FN(A20_EA20), GPIO_FN(PORT66_KEYIN0), GPIO_FN(MSIOF0_RSCK), - GPIO_FN(A21_EA21), GPIO_FN(PORT67_KEYIN1), GPIO_FN(MSIOF0_RSYNC), - GPIO_FN(A22_EA22), GPIO_FN(PORT68_KEYIN2), GPIO_FN(MSIOF0_MCK0), - GPIO_FN(A23_EA23), GPIO_FN(PORT69_KEYIN3), GPIO_FN(MSIOF0_MCK1), - GPIO_FN(A24_EA24), GPIO_FN(PORT70_KEYIN4), GPIO_FN(MSIOF0_RXD), - GPIO_FN(A25_EA25), GPIO_FN(PORT71_KEYIN5), GPIO_FN(MSIOF0_SS2), - GPIO_FN(A26), GPIO_FN(PORT72_KEYIN6), - GPIO_FN(D0_ED0_NAF0), - GPIO_FN(D1_ED1_NAF1), - GPIO_FN(D2_ED2_NAF2), - GPIO_FN(D3_ED3_NAF3), - GPIO_FN(D4_ED4_NAF4), - GPIO_FN(D5_ED5_NAF5), - GPIO_FN(D6_ED6_NAF6), - GPIO_FN(D7_ED7_NAF7), - GPIO_FN(D8_ED8_NAF8), - GPIO_FN(D9_ED9_NAF9), - GPIO_FN(D10_ED10_NAF10), - GPIO_FN(D11_ED11_NAF11), - GPIO_FN(D12_ED12_NAF12), - GPIO_FN(D13_ED13_NAF13), - GPIO_FN(D14_ED14_NAF14), - GPIO_FN(D15_ED15_NAF15), - GPIO_FN(CS4), - GPIO_FN(CS5A), GPIO_FN(FMSICK), - - /* 55-3 (FN) */ - GPIO_FN(CS5B), GPIO_FN(FCE1), - GPIO_FN(CS6B), GPIO_FN(XCS2), GPIO_FN(CS6A), GPIO_FN(DACK0), - GPIO_FN(FCE0), - GPIO_FN(WAIT), GPIO_FN(DREQ0), - GPIO_FN(RD_XRD), - GPIO_FN(WE0_XWR0_FWE), - GPIO_FN(WE1_XWR1), - GPIO_FN(FRB), - GPIO_FN(CKO), - GPIO_FN(NBRSTOUT), - GPIO_FN(NBRST), - GPIO_FN(GPS_EPPSIN), - GPIO_FN(LATCHPULSE), - GPIO_FN(LTESIGNAL), - GPIO_FN(LEGACYSTATE), - GPIO_FN(TCKON), - GPIO_FN(VIO_VD), GPIO_FN(PORT128_KEYOUT0), GPIO_FN(IPORT0), - GPIO_FN(VIO_HD), GPIO_FN(PORT129_KEYOUT1), GPIO_FN(IPORT1), - GPIO_FN(VIO_D0), GPIO_FN(PORT130_KEYOUT2), GPIO_FN(PORT130_MSIOF2_RXD), - GPIO_FN(VIO_D1), GPIO_FN(PORT131_KEYOUT3), GPIO_FN(PORT131_MSIOF2_SS1), - GPIO_FN(VIO_D2), GPIO_FN(PORT132_KEYOUT4), GPIO_FN(PORT132_MSIOF2_SS2), - GPIO_FN(VIO_D3), GPIO_FN(PORT133_KEYOUT5), - GPIO_FN(PORT133_MSIOF2_TSYNC), - GPIO_FN(VIO_D4), GPIO_FN(PORT134_KEYIN0), GPIO_FN(PORT134_MSIOF2_TXD), - GPIO_FN(VIO_D5), GPIO_FN(PORT135_KEYIN1), GPIO_FN(PORT135_MSIOF2_TSCK), - GPIO_FN(VIO_D6), GPIO_FN(PORT136_KEYIN2), - GPIO_FN(VIO_D7), GPIO_FN(PORT137_KEYIN3), - GPIO_FN(VIO_D8), GPIO_FN(M9_SLCD_A01), GPIO_FN(PORT138_FSIAOMC), - GPIO_FN(VIO_D9), GPIO_FN(M10_SLCD_CK1), GPIO_FN(PORT139_FSIAOLR), - GPIO_FN(VIO_D10), GPIO_FN(M11_SLCD_SO1), GPIO_FN(TPU0TO2), - GPIO_FN(PORT140_FSIAOBT), - GPIO_FN(VIO_D11), GPIO_FN(M12_SLCD_CE1), GPIO_FN(TPU0TO3), - GPIO_FN(PORT141_FSIAOSLD), - GPIO_FN(VIO_D12), GPIO_FN(M13_BSW), GPIO_FN(PORT142_FSIACK), - GPIO_FN(VIO_D13), GPIO_FN(M14_GSW), GPIO_FN(PORT143_FSIAILR), - GPIO_FN(VIO_D14), GPIO_FN(M15_RSW), GPIO_FN(PORT144_FSIAIBT), - GPIO_FN(VIO_D15), GPIO_FN(TPU1TO3), GPIO_FN(PORT145_FSIAISLD), - GPIO_FN(VIO_CLK), GPIO_FN(PORT146_KEYIN4), GPIO_FN(IPORT2), - GPIO_FN(VIO_FIELD), GPIO_FN(PORT147_KEYIN5), - GPIO_FN(VIO_CKO), GPIO_FN(PORT148_KEYIN6), - GPIO_FN(A27), GPIO_FN(RDWR_XWE), GPIO_FN(MFG0_IN1), - GPIO_FN(MFG0_IN2), - GPIO_FN(TS_SPSYNC3), GPIO_FN(MSIOF2_RSCK), - GPIO_FN(TS_SDAT3), GPIO_FN(MSIOF2_RSYNC), - GPIO_FN(TPU1TO2), GPIO_FN(TS_SDEN3), GPIO_FN(PORT153_MSIOF2_SS1), - GPIO_FN(SOUT3), GPIO_FN(SCIFA2_TXD1), GPIO_FN(MSIOF2_MCK0), - GPIO_FN(SIN3), GPIO_FN(SCIFA2_RXD1), GPIO_FN(MSIOF2_MCK1), - GPIO_FN(XRTS3), GPIO_FN(SCIFA2_RTS1), GPIO_FN(PORT156_MSIOF2_SS2), - GPIO_FN(XCTS3), GPIO_FN(SCIFA2_CTS1), GPIO_FN(PORT157_MSIOF2_RXD), - - /* 55-4 (FN) */ - GPIO_FN(DINT), GPIO_FN(SCIFA2_SCK1), GPIO_FN(TS_SCK3), - GPIO_FN(PORT159_SCIFB_SCK), GPIO_FN(PORT159_SCIFA5_SCK), GPIO_FN(NMI), - GPIO_FN(PORT160_SCIFB_TXD), GPIO_FN(PORT160_SCIFA5_TXD), GPIO_FN(SOUT0), - GPIO_FN(PORT161_SCIFB_CTS), GPIO_FN(PORT161_SCIFA5_CTS), GPIO_FN(XCTS0), - GPIO_FN(MFG3_IN2), - GPIO_FN(PORT162_SCIFB_RXD), GPIO_FN(PORT162_SCIFA5_RXD), GPIO_FN(SIN0), - GPIO_FN(MFG3_IN1), - GPIO_FN(PORT163_SCIFB_RTS), GPIO_FN(PORT163_SCIFA5_RTS), GPIO_FN(XRTS0), - GPIO_FN(MFG3_OUT1), GPIO_FN(TPU3TO0), - GPIO_FN(LCDD0), GPIO_FN(PORT192_KEYOUT0), GPIO_FN(EXT_CKI), - GPIO_FN(LCDD1), GPIO_FN(PORT193_KEYOUT1), GPIO_FN(PORT193_SCIFA5_CTS), - GPIO_FN(BBIF2_TSYNC1), - GPIO_FN(LCDD2), GPIO_FN(PORT194_KEYOUT2), GPIO_FN(PORT194_SCIFA5_RTS), - GPIO_FN(BBIF2_TSCK1), - GPIO_FN(LCDD3), GPIO_FN(PORT195_KEYOUT3), GPIO_FN(PORT195_SCIFA5_RXD), - GPIO_FN(BBIF2_TXD1), - GPIO_FN(LCDD4), GPIO_FN(PORT196_KEYOUT4), GPIO_FN(PORT196_SCIFA5_TXD), - GPIO_FN(LCDD5), GPIO_FN(PORT197_KEYOUT5), GPIO_FN(PORT197_SCIFA5_SCK), - GPIO_FN(MFG2_OUT2), - GPIO_FN(LCDD6), - GPIO_FN(LCDD7), GPIO_FN(TPU4TO1), GPIO_FN(MFG4_OUT2), - GPIO_FN(LCDD8), GPIO_FN(PORT200_KEYIN0), GPIO_FN(VIO_DR0), - GPIO_FN(D16), - GPIO_FN(LCDD9), GPIO_FN(PORT201_KEYIN1), GPIO_FN(VIO_DR1), - GPIO_FN(D17), - GPIO_FN(LCDD10), GPIO_FN(PORT202_KEYIN2), GPIO_FN(VIO_DR2), - GPIO_FN(D18), - GPIO_FN(LCDD11), GPIO_FN(PORT203_KEYIN3), GPIO_FN(VIO_DR3), - GPIO_FN(D19), - GPIO_FN(LCDD12), GPIO_FN(PORT204_KEYIN4), GPIO_FN(VIO_DR4), - GPIO_FN(D20), - GPIO_FN(LCDD13), GPIO_FN(PORT205_KEYIN5), GPIO_FN(VIO_DR5), - GPIO_FN(D21), - GPIO_FN(LCDD14), GPIO_FN(PORT206_KEYIN6), GPIO_FN(VIO_DR6), - GPIO_FN(D22), - GPIO_FN(LCDD15), GPIO_FN(PORT207_MSIOF0L_SS1), GPIO_FN(PORT207_KEYOUT0), - GPIO_FN(VIO_DR7), GPIO_FN(D23), - GPIO_FN(LCDD16), GPIO_FN(PORT208_MSIOF0L_SS2), GPIO_FN(PORT208_KEYOUT1), - GPIO_FN(VIO_VDR), GPIO_FN(D24), - GPIO_FN(LCDD17), GPIO_FN(PORT209_KEYOUT2), GPIO_FN(VIO_HDR), - GPIO_FN(D25), - GPIO_FN(LCDD18), GPIO_FN(DREQ2), GPIO_FN(PORT210_MSIOF0L_SS1), - GPIO_FN(D26), - GPIO_FN(LCDD19), GPIO_FN(PORT211_MSIOF0L_SS2), GPIO_FN(D27), - GPIO_FN(LCDD20), GPIO_FN(TS_SPSYNC1), GPIO_FN(MSIOF0L_MCK0), - GPIO_FN(D28), - GPIO_FN(LCDD21), GPIO_FN(TS_SDAT1), GPIO_FN(MSIOF0L_MCK1), - GPIO_FN(D29), - GPIO_FN(LCDD22), GPIO_FN(TS_SDEN1), GPIO_FN(MSIOF0L_RSCK), - GPIO_FN(D30), - GPIO_FN(LCDD23), GPIO_FN(TS_SCK1), GPIO_FN(MSIOF0L_RSYNC), - GPIO_FN(D31), - GPIO_FN(LCDDCK), GPIO_FN(LCDWR), GPIO_FN(PORT216_KEYOUT3), - GPIO_FN(VIO_CLKR), - GPIO_FN(LCDRD), GPIO_FN(DACK2), GPIO_FN(MSIOF0L_TSYNC), - GPIO_FN(LCDHSYN), GPIO_FN(LCDCS), GPIO_FN(LCDCS2), GPIO_FN(DACK3), - GPIO_FN(PORT218_VIO_CKOR), GPIO_FN(PORT218_KEYOUT4), - GPIO_FN(LCDDISP), GPIO_FN(LCDRS), GPIO_FN(DREQ3), GPIO_FN(MSIOF0L_TSCK), - GPIO_FN(LCDVSYN), GPIO_FN(LCDVSYN2), GPIO_FN(PORT220_KEYOUT5), - GPIO_FN(LCDLCLK), GPIO_FN(DREQ1), GPIO_FN(PWEN), GPIO_FN(MSIOF0L_RXD), - GPIO_FN(LCDDON), GPIO_FN(LCDDON2), GPIO_FN(DACK1), GPIO_FN(OVCN), - GPIO_FN(MSIOF0L_TXD), - GPIO_FN(SCIFA1_TXD), GPIO_FN(OVCN2), - GPIO_FN(EXTLP), GPIO_FN(SCIFA1_SCK), GPIO_FN(USBTERM), - GPIO_FN(PORT226_VIO_CKO2), - GPIO_FN(SCIFA1_RTS), GPIO_FN(IDIN), - GPIO_FN(SCIFA1_RXD), - GPIO_FN(SCIFA1_CTS), GPIO_FN(MFG1_IN1), - GPIO_FN(MSIOF1_TXD), GPIO_FN(SCIFA2_TXD2), GPIO_FN(PORT230_FSIAOMC), - GPIO_FN(MSIOF1_TSYNC), GPIO_FN(SCIFA2_CTS2), GPIO_FN(PORT231_FSIAOLR), - GPIO_FN(MSIOF1_TSCK), GPIO_FN(SCIFA2_SCK2), GPIO_FN(PORT232_FSIAOBT), - GPIO_FN(MSIOF1_RXD), GPIO_FN(SCIFA2_RXD2), GPIO_FN(GPS_VCOTRIG), - GPIO_FN(PORT233_FSIACK), - GPIO_FN(MSIOF1_RSCK), GPIO_FN(SCIFA2_RTS2), GPIO_FN(PORT234_FSIAOSLD), - GPIO_FN(MSIOF1_RSYNC), GPIO_FN(OPORT0), GPIO_FN(MFG1_IN2), - GPIO_FN(PORT235_FSIAILR), - GPIO_FN(MSIOF1_MCK0), GPIO_FN(I2C_SDA2), GPIO_FN(PORT236_FSIAIBT), - GPIO_FN(MSIOF1_MCK1), GPIO_FN(I2C_SCL2), GPIO_FN(PORT237_FSIAISLD), - GPIO_FN(MSIOF1_SS1), GPIO_FN(EDBGREQ3), - - /* 55-5 (FN) */ - GPIO_FN(MSIOF1_SS2), - GPIO_FN(SCIFA6_TXD), - GPIO_FN(PORT241_IRDA_OUT), GPIO_FN(PORT241_IROUT), GPIO_FN(MFG4_OUT1), - GPIO_FN(TPU4TO0), - GPIO_FN(PORT242_IRDA_IN), GPIO_FN(MFG4_IN2), - GPIO_FN(PORT243_IRDA_FIRSEL), GPIO_FN(PORT243_VIO_CKO2), - GPIO_FN(PORT244_SCIFA5_CTS), GPIO_FN(MFG2_IN1), - GPIO_FN(PORT244_SCIFB_CTS), - GPIO_FN(PORT245_SCIFA5_RTS), GPIO_FN(MFG2_IN2), - GPIO_FN(PORT245_SCIFB_RTS), - GPIO_FN(PORT246_SCIFA5_RXD), GPIO_FN(MFG1_OUT1), - GPIO_FN(PORT246_SCIFB_RXD), GPIO_FN(TPU1TO0), - GPIO_FN(PORT247_SCIFA5_TXD), GPIO_FN(MFG3_OUT2), - GPIO_FN(PORT247_SCIFB_TXD), GPIO_FN(TPU3TO1), - GPIO_FN(PORT248_SCIFA5_SCK), GPIO_FN(MFG2_OUT1), - GPIO_FN(PORT248_SCIFB_SCK), GPIO_FN(TPU2TO0), - GPIO_FN(PORT249_IROUT), GPIO_FN(MFG4_IN1), - GPIO_FN(SDHICLK0), GPIO_FN(TCK2_SWCLK_MC0), - GPIO_FN(SDHICD0), - GPIO_FN(SDHID0_0), GPIO_FN(TMS2_SWDIO_MC0), - GPIO_FN(SDHID0_1), GPIO_FN(TDO2_SWO0_MC0), - GPIO_FN(SDHID0_2), GPIO_FN(TDI2), - GPIO_FN(SDHID0_3), GPIO_FN(RTCK2_SWO1_MC0), - GPIO_FN(SDHICMD0), GPIO_FN(TRST2), - GPIO_FN(SDHIWP0), GPIO_FN(EDBGREQ2), - GPIO_FN(SDHICLK1), GPIO_FN(TCK3_SWCLK_MC1), - GPIO_FN(SDHID1_0), GPIO_FN(M11_SLCD_SO2), GPIO_FN(TS_SPSYNC2), - GPIO_FN(TMS3_SWDIO_MC1), - GPIO_FN(SDHID1_1), GPIO_FN(M9_SLCD_A02), GPIO_FN(TS_SDAT2), - GPIO_FN(TDO3_SWO0_MC1), - GPIO_FN(SDHID1_2), GPIO_FN(M10_SLCD_CK2), GPIO_FN(TS_SDEN2), - GPIO_FN(TDI3), - GPIO_FN(SDHID1_3), GPIO_FN(M12_SLCD_CE2), GPIO_FN(TS_SCK2), - GPIO_FN(RTCK3_SWO1_MC1), - GPIO_FN(SDHICMD1), GPIO_FN(TRST3), - GPIO_FN(RESETOUTS), -}; - -static struct pinmux_cfg_reg pinmux_config_regs[] = { - PORTCR(0, 0xe6050000), /* PORT0CR */ - PORTCR(1, 0xe6050001), /* PORT1CR */ - PORTCR(2, 0xe6050002), /* PORT2CR */ - PORTCR(3, 0xe6050003), /* PORT3CR */ - PORTCR(4, 0xe6050004), /* PORT4CR */ - PORTCR(5, 0xe6050005), /* PORT5CR */ - PORTCR(6, 0xe6050006), /* PORT6CR */ - PORTCR(7, 0xe6050007), /* PORT7CR */ - PORTCR(8, 0xe6050008), /* PORT8CR */ - PORTCR(9, 0xe6050009), /* PORT9CR */ - - PORTCR(10, 0xe605000a), /* PORT10CR */ - PORTCR(11, 0xe605000b), /* PORT11CR */ - PORTCR(12, 0xe605000c), /* PORT12CR */ - PORTCR(13, 0xe605000d), /* PORT13CR */ - PORTCR(14, 0xe605000e), /* PORT14CR */ - PORTCR(15, 0xe605000f), /* PORT15CR */ - PORTCR(16, 0xe6050010), /* PORT16CR */ - PORTCR(17, 0xe6050011), /* PORT17CR */ - PORTCR(18, 0xe6050012), /* PORT18CR */ - PORTCR(19, 0xe6050013), /* PORT19CR */ - - PORTCR(20, 0xe6050014), /* PORT20CR */ - PORTCR(21, 0xe6050015), /* PORT21CR */ - PORTCR(22, 0xe6050016), /* PORT22CR */ - PORTCR(23, 0xe6050017), /* PORT23CR */ - PORTCR(24, 0xe6050018), /* PORT24CR */ - PORTCR(25, 0xe6050019), /* PORT25CR */ - PORTCR(26, 0xe605001a), /* PORT26CR */ - PORTCR(27, 0xe605001b), /* PORT27CR */ - PORTCR(28, 0xe605001c), /* PORT28CR */ - PORTCR(29, 0xe605001d), /* PORT29CR */ - - PORTCR(30, 0xe605001e), /* PORT30CR */ - PORTCR(31, 0xe605001f), /* PORT31CR */ - PORTCR(32, 0xe6050020), /* PORT32CR */ - PORTCR(33, 0xe6050021), /* PORT33CR */ - PORTCR(34, 0xe6050022), /* PORT34CR */ - PORTCR(35, 0xe6050023), /* PORT35CR */ - PORTCR(36, 0xe6050024), /* PORT36CR */ - PORTCR(37, 0xe6050025), /* PORT37CR */ - PORTCR(38, 0xe6050026), /* PORT38CR */ - PORTCR(39, 0xe6050027), /* PORT39CR */ - - PORTCR(40, 0xe6050028), /* PORT40CR */ - PORTCR(41, 0xe6050029), /* PORT41CR */ - PORTCR(42, 0xe605002a), /* PORT42CR */ - PORTCR(43, 0xe605002b), /* PORT43CR */ - PORTCR(44, 0xe605002c), /* PORT44CR */ - PORTCR(45, 0xe605002d), /* PORT45CR */ - PORTCR(46, 0xe605002e), /* PORT46CR */ - PORTCR(47, 0xe605002f), /* PORT47CR */ - PORTCR(48, 0xe6050030), /* PORT48CR */ - PORTCR(49, 0xe6050031), /* PORT49CR */ - - PORTCR(50, 0xe6050032), /* PORT50CR */ - PORTCR(51, 0xe6050033), /* PORT51CR */ - PORTCR(52, 0xe6050034), /* PORT52CR */ - PORTCR(53, 0xe6050035), /* PORT53CR */ - PORTCR(54, 0xe6050036), /* PORT54CR */ - PORTCR(55, 0xe6050037), /* PORT55CR */ - PORTCR(56, 0xe6050038), /* PORT56CR */ - PORTCR(57, 0xe6050039), /* PORT57CR */ - PORTCR(58, 0xe605003a), /* PORT58CR */ - PORTCR(59, 0xe605003b), /* PORT59CR */ - - PORTCR(60, 0xe605003c), /* PORT60CR */ - PORTCR(61, 0xe605003d), /* PORT61CR */ - PORTCR(62, 0xe605003e), /* PORT62CR */ - PORTCR(63, 0xe605003f), /* PORT63CR */ - PORTCR(64, 0xe6050040), /* PORT64CR */ - PORTCR(65, 0xe6050041), /* PORT65CR */ - PORTCR(66, 0xe6050042), /* PORT66CR */ - PORTCR(67, 0xe6050043), /* PORT67CR */ - PORTCR(68, 0xe6050044), /* PORT68CR */ - PORTCR(69, 0xe6050045), /* PORT69CR */ - - PORTCR(70, 0xe6050046), /* PORT70CR */ - PORTCR(71, 0xe6050047), /* PORT71CR */ - PORTCR(72, 0xe6050048), /* PORT72CR */ - PORTCR(73, 0xe6050049), /* PORT73CR */ - PORTCR(74, 0xe605004a), /* PORT74CR */ - PORTCR(75, 0xe605004b), /* PORT75CR */ - PORTCR(76, 0xe605004c), /* PORT76CR */ - PORTCR(77, 0xe605004d), /* PORT77CR */ - PORTCR(78, 0xe605004e), /* PORT78CR */ - PORTCR(79, 0xe605004f), /* PORT79CR */ - - PORTCR(80, 0xe6050050), /* PORT80CR */ - PORTCR(81, 0xe6050051), /* PORT81CR */ - PORTCR(82, 0xe6050052), /* PORT82CR */ - PORTCR(83, 0xe6050053), /* PORT83CR */ - PORTCR(84, 0xe6050054), /* PORT84CR */ - PORTCR(85, 0xe6050055), /* PORT85CR */ - PORTCR(86, 0xe6050056), /* PORT86CR */ - PORTCR(87, 0xe6050057), /* PORT87CR */ - PORTCR(88, 0xe6050058), /* PORT88CR */ - PORTCR(89, 0xe6050059), /* PORT89CR */ - - PORTCR(90, 0xe605005a), /* PORT90CR */ - PORTCR(91, 0xe605005b), /* PORT91CR */ - PORTCR(92, 0xe605005c), /* PORT92CR */ - PORTCR(93, 0xe605005d), /* PORT93CR */ - PORTCR(94, 0xe605005e), /* PORT94CR */ - PORTCR(95, 0xe605005f), /* PORT95CR */ - PORTCR(96, 0xe6050060), /* PORT96CR */ - PORTCR(97, 0xe6050061), /* PORT97CR */ - PORTCR(98, 0xe6050062), /* PORT98CR */ - PORTCR(99, 0xe6050063), /* PORT99CR */ - - PORTCR(100, 0xe6050064), /* PORT100CR */ - PORTCR(101, 0xe6050065), /* PORT101CR */ - PORTCR(102, 0xe6050066), /* PORT102CR */ - PORTCR(103, 0xe6050067), /* PORT103CR */ - PORTCR(104, 0xe6050068), /* PORT104CR */ - PORTCR(105, 0xe6050069), /* PORT105CR */ - PORTCR(106, 0xe605006a), /* PORT106CR */ - PORTCR(107, 0xe605006b), /* PORT107CR */ - PORTCR(108, 0xe605006c), /* PORT108CR */ - PORTCR(109, 0xe605006d), /* PORT109CR */ - - PORTCR(110, 0xe605006e), /* PORT110CR */ - PORTCR(111, 0xe605006f), /* PORT111CR */ - PORTCR(112, 0xe6050070), /* PORT112CR */ - PORTCR(113, 0xe6050071), /* PORT113CR */ - PORTCR(114, 0xe6050072), /* PORT114CR */ - PORTCR(115, 0xe6050073), /* PORT115CR */ - PORTCR(116, 0xe6050074), /* PORT116CR */ - PORTCR(117, 0xe6050075), /* PORT117CR */ - PORTCR(118, 0xe6050076), /* PORT118CR */ - - PORTCR(128, 0xe6051080), /* PORT128CR */ - PORTCR(129, 0xe6051081), /* PORT129CR */ - - PORTCR(130, 0xe6051082), /* PORT130CR */ - PORTCR(131, 0xe6051083), /* PORT131CR */ - PORTCR(132, 0xe6051084), /* PORT132CR */ - PORTCR(133, 0xe6051085), /* PORT133CR */ - PORTCR(134, 0xe6051086), /* PORT134CR */ - PORTCR(135, 0xe6051087), /* PORT135CR */ - PORTCR(136, 0xe6051088), /* PORT136CR */ - PORTCR(137, 0xe6051089), /* PORT137CR */ - PORTCR(138, 0xe605108a), /* PORT138CR */ - PORTCR(139, 0xe605108b), /* PORT139CR */ - - PORTCR(140, 0xe605108c), /* PORT140CR */ - PORTCR(141, 0xe605108d), /* PORT141CR */ - PORTCR(142, 0xe605108e), /* PORT142CR */ - PORTCR(143, 0xe605108f), /* PORT143CR */ - PORTCR(144, 0xe6051090), /* PORT144CR */ - PORTCR(145, 0xe6051091), /* PORT145CR */ - PORTCR(146, 0xe6051092), /* PORT146CR */ - PORTCR(147, 0xe6051093), /* PORT147CR */ - PORTCR(148, 0xe6051094), /* PORT148CR */ - PORTCR(149, 0xe6051095), /* PORT149CR */ - - PORTCR(150, 0xe6051096), /* PORT150CR */ - PORTCR(151, 0xe6051097), /* PORT151CR */ - PORTCR(152, 0xe6051098), /* PORT152CR */ - PORTCR(153, 0xe6051099), /* PORT153CR */ - PORTCR(154, 0xe605109a), /* PORT154CR */ - PORTCR(155, 0xe605109b), /* PORT155CR */ - PORTCR(156, 0xe605109c), /* PORT156CR */ - PORTCR(157, 0xe605109d), /* PORT157CR */ - PORTCR(158, 0xe605109e), /* PORT158CR */ - PORTCR(159, 0xe605109f), /* PORT159CR */ - - PORTCR(160, 0xe60510a0), /* PORT160CR */ - PORTCR(161, 0xe60510a1), /* PORT161CR */ - PORTCR(162, 0xe60510a2), /* PORT162CR */ - PORTCR(163, 0xe60510a3), /* PORT163CR */ - PORTCR(164, 0xe60510a4), /* PORT164CR */ - - PORTCR(192, 0xe60520c0), /* PORT192CR */ - PORTCR(193, 0xe60520c1), /* PORT193CR */ - PORTCR(194, 0xe60520c2), /* PORT194CR */ - PORTCR(195, 0xe60520c3), /* PORT195CR */ - PORTCR(196, 0xe60520c4), /* PORT196CR */ - PORTCR(197, 0xe60520c5), /* PORT197CR */ - PORTCR(198, 0xe60520c6), /* PORT198CR */ - PORTCR(199, 0xe60520c7), /* PORT199CR */ - - PORTCR(200, 0xe60520c8), /* PORT200CR */ - PORTCR(201, 0xe60520c9), /* PORT201CR */ - PORTCR(202, 0xe60520ca), /* PORT202CR */ - PORTCR(203, 0xe60520cb), /* PORT203CR */ - PORTCR(204, 0xe60520cc), /* PORT204CR */ - PORTCR(205, 0xe60520cd), /* PORT205CR */ - PORTCR(206, 0xe60520ce), /* PORT206CR */ - PORTCR(207, 0xe60520cf), /* PORT207CR */ - PORTCR(208, 0xe60520d0), /* PORT208CR */ - PORTCR(209, 0xe60520d1), /* PORT209CR */ - - PORTCR(210, 0xe60520d2), /* PORT210CR */ - PORTCR(211, 0xe60520d3), /* PORT211CR */ - PORTCR(212, 0xe60520d4), /* PORT212CR */ - PORTCR(213, 0xe60520d5), /* PORT213CR */ - PORTCR(214, 0xe60520d6), /* PORT214CR */ - PORTCR(215, 0xe60520d7), /* PORT215CR */ - PORTCR(216, 0xe60520d8), /* PORT216CR */ - PORTCR(217, 0xe60520d9), /* PORT217CR */ - PORTCR(218, 0xe60520da), /* PORT218CR */ - PORTCR(219, 0xe60520db), /* PORT219CR */ - - PORTCR(220, 0xe60520dc), /* PORT220CR */ - PORTCR(221, 0xe60520dd), /* PORT221CR */ - PORTCR(222, 0xe60520de), /* PORT222CR */ - PORTCR(223, 0xe60520df), /* PORT223CR */ - PORTCR(224, 0xe60520e0), /* PORT224CR */ - PORTCR(225, 0xe60520e1), /* PORT225CR */ - PORTCR(226, 0xe60520e2), /* PORT226CR */ - PORTCR(227, 0xe60520e3), /* PORT227CR */ - PORTCR(228, 0xe60520e4), /* PORT228CR */ - PORTCR(229, 0xe60520e5), /* PORT229CR */ - - PORTCR(230, 0xe60520e6), /* PORT230CR */ - PORTCR(231, 0xe60520e7), /* PORT231CR */ - PORTCR(232, 0xe60520e8), /* PORT232CR */ - PORTCR(233, 0xe60520e9), /* PORT233CR */ - PORTCR(234, 0xe60520ea), /* PORT234CR */ - PORTCR(235, 0xe60520eb), /* PORT235CR */ - PORTCR(236, 0xe60520ec), /* PORT236CR */ - PORTCR(237, 0xe60520ed), /* PORT237CR */ - PORTCR(238, 0xe60520ee), /* PORT238CR */ - PORTCR(239, 0xe60520ef), /* PORT239CR */ - - PORTCR(240, 0xe60520f0), /* PORT240CR */ - PORTCR(241, 0xe60520f1), /* PORT241CR */ - PORTCR(242, 0xe60520f2), /* PORT242CR */ - PORTCR(243, 0xe60520f3), /* PORT243CR */ - PORTCR(244, 0xe60520f4), /* PORT244CR */ - PORTCR(245, 0xe60520f5), /* PORT245CR */ - PORTCR(246, 0xe60520f6), /* PORT246CR */ - PORTCR(247, 0xe60520f7), /* PORT247CR */ - PORTCR(248, 0xe60520f8), /* PORT248CR */ - PORTCR(249, 0xe60520f9), /* PORT249CR */ - - PORTCR(250, 0xe60520fa), /* PORT250CR */ - PORTCR(251, 0xe60520fb), /* PORT251CR */ - PORTCR(252, 0xe60520fc), /* PORT252CR */ - PORTCR(253, 0xe60520fd), /* PORT253CR */ - PORTCR(254, 0xe60520fe), /* PORT254CR */ - PORTCR(255, 0xe60520ff), /* PORT255CR */ - PORTCR(256, 0xe6052100), /* PORT256CR */ - PORTCR(257, 0xe6052101), /* PORT257CR */ - PORTCR(258, 0xe6052102), /* PORT258CR */ - PORTCR(259, 0xe6052103), /* PORT259CR */ - - PORTCR(260, 0xe6052104), /* PORT260CR */ - PORTCR(261, 0xe6052105), /* PORT261CR */ - PORTCR(262, 0xe6052106), /* PORT262CR */ - PORTCR(263, 0xe6052107), /* PORT263CR */ - PORTCR(264, 0xe6052108), /* PORT264CR */ - - { PINMUX_CFG_REG("MSELBCR", 0xe6058024, 32, 1) { - 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, - 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, - MSELBCR_MSEL17_0, MSELBCR_MSEL17_1, - MSELBCR_MSEL16_0, MSELBCR_MSEL16_1, - 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, - 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } - }, - { }, -}; - -static struct pinmux_data_reg pinmux_data_regs[] = { - { PINMUX_DATA_REG("PORTL031_000DR", 0xe6054000, 32) { - PORT31_DATA, PORT30_DATA, PORT29_DATA, PORT28_DATA, - PORT27_DATA, PORT26_DATA, PORT25_DATA, PORT24_DATA, - PORT23_DATA, PORT22_DATA, PORT21_DATA, PORT20_DATA, - PORT19_DATA, PORT18_DATA, PORT17_DATA, PORT16_DATA, - PORT15_DATA, PORT14_DATA, PORT13_DATA, PORT12_DATA, - PORT11_DATA, PORT10_DATA, PORT9_DATA, PORT8_DATA, - PORT7_DATA, PORT6_DATA, PORT5_DATA, PORT4_DATA, - PORT3_DATA, PORT2_DATA, PORT1_DATA, PORT0_DATA } - }, - { PINMUX_DATA_REG("PORTL063_032DR", 0xe6054004, 32) { - PORT63_DATA, PORT62_DATA, PORT61_DATA, PORT60_DATA, - PORT59_DATA, PORT58_DATA, PORT57_DATA, PORT56_DATA, - PORT55_DATA, PORT54_DATA, PORT53_DATA, PORT52_DATA, - PORT51_DATA, PORT50_DATA, PORT49_DATA, PORT48_DATA, - PORT47_DATA, PORT46_DATA, PORT45_DATA, PORT44_DATA, - PORT43_DATA, PORT42_DATA, PORT41_DATA, PORT40_DATA, - PORT39_DATA, PORT38_DATA, PORT37_DATA, PORT36_DATA, - PORT35_DATA, PORT34_DATA, PORT33_DATA, PORT32_DATA } - }, - { PINMUX_DATA_REG("PORTL095_064DR", 0xe6054008, 32) { - PORT95_DATA, PORT94_DATA, PORT93_DATA, PORT92_DATA, - PORT91_DATA, PORT90_DATA, PORT89_DATA, PORT88_DATA, - PORT87_DATA, PORT86_DATA, PORT85_DATA, PORT84_DATA, - PORT83_DATA, PORT82_DATA, PORT81_DATA, PORT80_DATA, - PORT79_DATA, PORT78_DATA, PORT77_DATA, PORT76_DATA, - PORT75_DATA, PORT74_DATA, PORT73_DATA, PORT72_DATA, - PORT71_DATA, PORT70_DATA, PORT69_DATA, PORT68_DATA, - PORT67_DATA, PORT66_DATA, PORT65_DATA, PORT64_DATA } - }, - { PINMUX_DATA_REG("PORTD127_096DR", 0xe605400C, 32) { - 0, 0, 0, 0, - 0, 0, 0, 0, - 0, PORT118_DATA, PORT117_DATA, PORT116_DATA, - PORT115_DATA, PORT114_DATA, PORT113_DATA, PORT112_DATA, - PORT111_DATA, PORT110_DATA, PORT109_DATA, PORT108_DATA, - PORT107_DATA, PORT106_DATA, PORT105_DATA, PORT104_DATA, - PORT103_DATA, PORT102_DATA, PORT101_DATA, PORT100_DATA, - PORT99_DATA, PORT98_DATA, PORT97_DATA, PORT96_DATA } - }, - { PINMUX_DATA_REG("PORTD159_128DR", 0xe6055000, 32) { - PORT159_DATA, PORT158_DATA, PORT157_DATA, PORT156_DATA, - PORT155_DATA, PORT154_DATA, PORT153_DATA, PORT152_DATA, - PORT151_DATA, PORT150_DATA, PORT149_DATA, PORT148_DATA, - PORT147_DATA, PORT146_DATA, PORT145_DATA, PORT144_DATA, - PORT143_DATA, PORT142_DATA, PORT141_DATA, PORT140_DATA, - PORT139_DATA, PORT138_DATA, PORT137_DATA, PORT136_DATA, - PORT135_DATA, PORT134_DATA, PORT133_DATA, PORT132_DATA, - PORT131_DATA, PORT130_DATA, PORT129_DATA, PORT128_DATA } - }, - { PINMUX_DATA_REG("PORTR191_160DR", 0xe6055004, 32) { - 0, 0, 0, 0, - 0, 0, 0, 0, - 0, 0, 0, 0, - 0, 0, 0, 0, - 0, 0, 0, 0, - 0, 0, 0, 0, - 0, 0, 0, PORT164_DATA, - PORT163_DATA, PORT162_DATA, PORT161_DATA, PORT160_DATA } - }, - { PINMUX_DATA_REG("PORTR223_192DR", 0xe6056000, 32) { - PORT223_DATA, PORT222_DATA, PORT221_DATA, PORT220_DATA, - PORT219_DATA, PORT218_DATA, PORT217_DATA, PORT216_DATA, - PORT215_DATA, PORT214_DATA, PORT213_DATA, PORT212_DATA, - PORT211_DATA, PORT210_DATA, PORT209_DATA, PORT208_DATA, - PORT207_DATA, PORT206_DATA, PORT205_DATA, PORT204_DATA, - PORT203_DATA, PORT202_DATA, PORT201_DATA, PORT200_DATA, - PORT199_DATA, PORT198_DATA, PORT197_DATA, PORT196_DATA, - PORT195_DATA, PORT194_DATA, PORT193_DATA, PORT192_DATA } - }, - { PINMUX_DATA_REG("PORTU255_224DR", 0xe6056004, 32) { - PORT255_DATA, PORT254_DATA, PORT253_DATA, PORT252_DATA, - PORT251_DATA, PORT250_DATA, PORT249_DATA, PORT248_DATA, - PORT247_DATA, PORT246_DATA, PORT245_DATA, PORT244_DATA, - PORT243_DATA, PORT242_DATA, PORT241_DATA, PORT240_DATA, - PORT239_DATA, PORT238_DATA, PORT237_DATA, PORT236_DATA, - PORT235_DATA, PORT234_DATA, PORT233_DATA, PORT232_DATA, - PORT231_DATA, PORT230_DATA, PORT229_DATA, PORT228_DATA, - PORT227_DATA, PORT226_DATA, PORT225_DATA, PORT224_DATA } - }, - { PINMUX_DATA_REG("PORTU287_256DR", 0xe6056008, 32) { - 0, 0, 0, 0, - 0, 0, 0, 0, - 0, 0, 0, 0, - 0, 0, 0, 0, - 0, 0, 0, 0, - 0, 0, 0, PORT264_DATA, - PORT263_DATA, PORT262_DATA, PORT261_DATA, PORT260_DATA, - PORT259_DATA, PORT258_DATA, PORT257_DATA, PORT256_DATA } - }, - { }, -}; - -static struct pinmux_info sh7377_pinmux_info = { - .name = "sh7377_pfc", - .reserved_id = PINMUX_RESERVED, - .data = { PINMUX_DATA_BEGIN, PINMUX_DATA_END }, - .input = { PINMUX_INPUT_BEGIN, PINMUX_INPUT_END }, - .input_pu = { PINMUX_INPUT_PULLUP_BEGIN, PINMUX_INPUT_PULLUP_END }, - .input_pd = { PINMUX_INPUT_PULLDOWN_BEGIN, PINMUX_INPUT_PULLDOWN_END }, - .output = { PINMUX_OUTPUT_BEGIN, PINMUX_OUTPUT_END }, - .mark = { PINMUX_MARK_BEGIN, PINMUX_MARK_END }, - .function = { PINMUX_FUNCTION_BEGIN, PINMUX_FUNCTION_END }, - - .first_gpio = GPIO_PORT0, - .last_gpio = GPIO_FN_RESETOUTS, - - .gpios = pinmux_gpios, - .cfg_regs = pinmux_config_regs, - .data_regs = pinmux_data_regs, - - .gpio_data = pinmux_data, - .gpio_data_size = ARRAY_SIZE(pinmux_data), -}; - -void sh7377_pinmux_init(void) -{ - register_pinmux(&sh7377_pinmux_info); -} diff --git a/arch/arm/mach-shmobile/setup-sh7377.c b/arch/arm/mach-shmobile/setup-sh7377.c deleted file mode 100644 index edcf98b..0000000 --- a/arch/arm/mach-shmobile/setup-sh7377.c +++ /dev/null @@ -1,549 +0,0 @@ -/* - * sh7377 processor support - * - * Copyright (C) 2010 Magnus Damm - * Copyright (C) 2008 Yoshihiro Shimoda - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -static struct map_desc sh7377_io_desc[] __initdata = { - /* create a 1:1 entity map for 0xe6xxxxxx - * used by CPGA, INTC and PFC. - */ - { - .virtual = 0xe6000000, - .pfn = __phys_to_pfn(0xe6000000), - .length = 256 << 20, - .type = MT_DEVICE_NONSHARED - }, -}; - -void __init sh7377_map_io(void) -{ - iotable_init(sh7377_io_desc, ARRAY_SIZE(sh7377_io_desc)); -} - -/* SCIFA0 */ -static struct plat_sci_port scif0_platform_data = { - .mapbase = 0xe6c40000, - .flags = UPF_BOOT_AUTOCONF, - .scscr = SCSCR_RE | SCSCR_TE, - .scbrr_algo_id = SCBRR_ALGO_4, - .type = PORT_SCIFA, - .irqs = { evt2irq(0xc00), evt2irq(0xc00), - evt2irq(0xc00), evt2irq(0xc00) }, -}; - -static struct platform_device scif0_device = { - .name = "sh-sci", - .id = 0, - .dev = { - .platform_data = &scif0_platform_data, - }, -}; - -/* SCIFA1 */ -static struct plat_sci_port scif1_platform_data = { - .mapbase = 0xe6c50000, - .flags = UPF_BOOT_AUTOCONF, - .scscr = SCSCR_RE | SCSCR_TE, - .scbrr_algo_id = SCBRR_ALGO_4, - .type = PORT_SCIFA, - .irqs = { evt2irq(0xc20), evt2irq(0xc20), - evt2irq(0xc20), evt2irq(0xc20) }, -}; - -static struct platform_device scif1_device = { - .name = "sh-sci", - .id = 1, - .dev = { - .platform_data = &scif1_platform_data, - }, -}; - -/* SCIFA2 */ -static struct plat_sci_port scif2_platform_data = { - .mapbase = 0xe6c60000, - .flags = UPF_BOOT_AUTOCONF, - .scscr = SCSCR_RE | SCSCR_TE, - .scbrr_algo_id = SCBRR_ALGO_4, - .type = PORT_SCIFA, - .irqs = { evt2irq(0xc40), evt2irq(0xc40), - evt2irq(0xc40), evt2irq(0xc40) }, -}; - -static struct platform_device scif2_device = { - .name = "sh-sci", - .id = 2, - .dev = { - .platform_data = &scif2_platform_data, - }, -}; - -/* SCIFA3 */ -static struct plat_sci_port scif3_platform_data = { - .mapbase = 0xe6c70000, - .flags = UPF_BOOT_AUTOCONF, - .scscr = SCSCR_RE | SCSCR_TE, - .scbrr_algo_id = SCBRR_ALGO_4, - .type = PORT_SCIFA, - .irqs = { evt2irq(0xc60), evt2irq(0xc60), - evt2irq(0xc60), evt2irq(0xc60) }, -}; - -static struct platform_device scif3_device = { - .name = "sh-sci", - .id = 3, - .dev = { - .platform_data = &scif3_platform_data, - }, -}; - -/* SCIFA4 */ -static struct plat_sci_port scif4_platform_data = { - .mapbase = 0xe6c80000, - .flags = UPF_BOOT_AUTOCONF, - .scscr = SCSCR_RE | SCSCR_TE, - .scbrr_algo_id = SCBRR_ALGO_4, - .type = PORT_SCIFA, - .irqs = { evt2irq(0xd20), evt2irq(0xd20), - evt2irq(0xd20), evt2irq(0xd20) }, -}; - -static struct platform_device scif4_device = { - .name = "sh-sci", - .id = 4, - .dev = { - .platform_data = &scif4_platform_data, - }, -}; - -/* SCIFA5 */ -static struct plat_sci_port scif5_platform_data = { - .mapbase = 0xe6cb0000, - .flags = UPF_BOOT_AUTOCONF, - .scscr = SCSCR_RE | SCSCR_TE, - .scbrr_algo_id = SCBRR_ALGO_4, - .type = PORT_SCIFA, - .irqs = { evt2irq(0xd40), evt2irq(0xd40), - evt2irq(0xd40), evt2irq(0xd40) }, -}; - -static struct platform_device scif5_device = { - .name = "sh-sci", - .id = 5, - .dev = { - .platform_data = &scif5_platform_data, - }, -}; - -/* SCIFA6 */ -static struct plat_sci_port scif6_platform_data = { - .mapbase = 0xe6cc0000, - .flags = UPF_BOOT_AUTOCONF, - .scscr = SCSCR_RE | SCSCR_TE, - .scbrr_algo_id = SCBRR_ALGO_4, - .type = PORT_SCIFA, - .irqs = { intcs_evt2irq(0x1a80), intcs_evt2irq(0x1a80), - intcs_evt2irq(0x1a80), intcs_evt2irq(0x1a80) }, -}; - -static struct platform_device scif6_device = { - .name = "sh-sci", - .id = 6, - .dev = { - .platform_data = &scif6_platform_data, - }, -}; - -/* SCIFB */ -static struct plat_sci_port scif7_platform_data = { - .mapbase = 0xe6c30000, - .flags = UPF_BOOT_AUTOCONF, - .scscr = SCSCR_RE | SCSCR_TE, - .scbrr_algo_id = SCBRR_ALGO_4, - .type = PORT_SCIFB, - .irqs = { evt2irq(0xd60), evt2irq(0xd60), - evt2irq(0xd60), evt2irq(0xd60) }, -}; - -static struct platform_device scif7_device = { - .name = "sh-sci", - .id = 7, - .dev = { - .platform_data = &scif7_platform_data, - }, -}; - -static struct sh_timer_config cmt10_platform_data = { - .name = "CMT10", - .channel_offset = 0x10, - .timer_bit = 0, - .clockevent_rating = 125, - .clocksource_rating = 125, -}; - -static struct resource cmt10_resources[] = { - [0] = { - .name = "CMT10", - .start = 0xe6138010, - .end = 0xe613801b, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = evt2irq(0xb00), /* CMT1_CMT10 */ - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device cmt10_device = { - .name = "sh_cmt", - .id = 10, - .dev = { - .platform_data = &cmt10_platform_data, - }, - .resource = cmt10_resources, - .num_resources = ARRAY_SIZE(cmt10_resources), -}; - -/* VPU */ -static struct uio_info vpu_platform_data = { - .name = "VPU5HG", - .version = "0", - .irq = intcs_evt2irq(0x980), -}; - -static struct resource vpu_resources[] = { - [0] = { - .name = "VPU", - .start = 0xfe900000, - .end = 0xfe900157, - .flags = IORESOURCE_MEM, - }, -}; - -static struct platform_device vpu_device = { - .name = "uio_pdrv_genirq", - .id = 0, - .dev = { - .platform_data = &vpu_platform_data, - }, - .resource = vpu_resources, - .num_resources = ARRAY_SIZE(vpu_resources), -}; - -/* VEU0 */ -static struct uio_info veu0_platform_data = { - .name = "VEU0", - .version = "0", - .irq = intcs_evt2irq(0x700), -}; - -static struct resource veu0_resources[] = { - [0] = { - .name = "VEU0", - .start = 0xfe920000, - .end = 0xfe9200cb, - .flags = IORESOURCE_MEM, - }, -}; - -static struct platform_device veu0_device = { - .name = "uio_pdrv_genirq", - .id = 1, - .dev = { - .platform_data = &veu0_platform_data, - }, - .resource = veu0_resources, - .num_resources = ARRAY_SIZE(veu0_resources), -}; - -/* VEU1 */ -static struct uio_info veu1_platform_data = { - .name = "VEU1", - .version = "0", - .irq = intcs_evt2irq(0x720), -}; - -static struct resource veu1_resources[] = { - [0] = { - .name = "VEU1", - .start = 0xfe924000, - .end = 0xfe9240cb, - .flags = IORESOURCE_MEM, - }, -}; - -static struct platform_device veu1_device = { - .name = "uio_pdrv_genirq", - .id = 2, - .dev = { - .platform_data = &veu1_platform_data, - }, - .resource = veu1_resources, - .num_resources = ARRAY_SIZE(veu1_resources), -}; - -/* VEU2 */ -static struct uio_info veu2_platform_data = { - .name = "VEU2", - .version = "0", - .irq = intcs_evt2irq(0x740), -}; - -static struct resource veu2_resources[] = { - [0] = { - .name = "VEU2", - .start = 0xfe928000, - .end = 0xfe928307, - .flags = IORESOURCE_MEM, - }, -}; - -static struct platform_device veu2_device = { - .name = "uio_pdrv_genirq", - .id = 3, - .dev = { - .platform_data = &veu2_platform_data, - }, - .resource = veu2_resources, - .num_resources = ARRAY_SIZE(veu2_resources), -}; - -/* VEU3 */ -static struct uio_info veu3_platform_data = { - .name = "VEU3", - .version = "0", - .irq = intcs_evt2irq(0x760), -}; - -static struct resource veu3_resources[] = { - [0] = { - .name = "VEU3", - .start = 0xfe92c000, - .end = 0xfe92c307, - .flags = IORESOURCE_MEM, - }, -}; - -static struct platform_device veu3_device = { - .name = "uio_pdrv_genirq", - .id = 4, - .dev = { - .platform_data = &veu3_platform_data, - }, - .resource = veu3_resources, - .num_resources = ARRAY_SIZE(veu3_resources), -}; - -/* JPU */ -static struct uio_info jpu_platform_data = { - .name = "JPU", - .version = "0", - .irq = intcs_evt2irq(0x560), -}; - -static struct resource jpu_resources[] = { - [0] = { - .name = "JPU", - .start = 0xfe980000, - .end = 0xfe9902d3, - .flags = IORESOURCE_MEM, - }, -}; - -static struct platform_device jpu_device = { - .name = "uio_pdrv_genirq", - .id = 5, - .dev = { - .platform_data = &jpu_platform_data, - }, - .resource = jpu_resources, - .num_resources = ARRAY_SIZE(jpu_resources), -}; - -/* SPU2DSP0 */ -static struct uio_info spu0_platform_data = { - .name = "SPU2DSP0", - .version = "0", - .irq = evt2irq(0x1800), -}; - -static struct resource spu0_resources[] = { - [0] = { - .name = "SPU2DSP0", - .start = 0xfe200000, - .end = 0xfe2fffff, - .flags = IORESOURCE_MEM, - }, -}; - -static struct platform_device spu0_device = { - .name = "uio_pdrv_genirq", - .id = 6, - .dev = { - .platform_data = &spu0_platform_data, - }, - .resource = spu0_resources, - .num_resources = ARRAY_SIZE(spu0_resources), -}; - -/* SPU2DSP1 */ -static struct uio_info spu1_platform_data = { - .name = "SPU2DSP1", - .version = "0", - .irq = evt2irq(0x1820), -}; - -static struct resource spu1_resources[] = { - [0] = { - .name = "SPU2DSP1", - .start = 0xfe300000, - .end = 0xfe3fffff, - .flags = IORESOURCE_MEM, - }, -}; - -static struct platform_device spu1_device = { - .name = "uio_pdrv_genirq", - .id = 7, - .dev = { - .platform_data = &spu1_platform_data, - }, - .resource = spu1_resources, - .num_resources = ARRAY_SIZE(spu1_resources), -}; - -static struct platform_device *sh7377_early_devices[] __initdata = { - &scif0_device, - &scif1_device, - &scif2_device, - &scif3_device, - &scif4_device, - &scif5_device, - &scif6_device, - &scif7_device, - &cmt10_device, -}; - -static struct platform_device *sh7377_devices[] __initdata = { - &vpu_device, - &veu0_device, - &veu1_device, - &veu2_device, - &veu3_device, - &jpu_device, - &spu0_device, - &spu1_device, -}; - -void __init sh7377_add_standard_devices(void) -{ - platform_add_devices(sh7377_early_devices, - ARRAY_SIZE(sh7377_early_devices)); - - platform_add_devices(sh7377_devices, - ARRAY_SIZE(sh7377_devices)); -} - -static void __init sh7377_earlytimer_init(void) -{ - sh7377_clock_init(); - shmobile_earlytimer_init(); -} - -#define SMSTPCR3 IOMEM(0xe615013c) -#define SMSTPCR3_CMT1 (1 << 29) - -void __init sh7377_add_early_devices(void) -{ - /* enable clock to CMT1 */ - __raw_writel(__raw_readl(SMSTPCR3) & ~SMSTPCR3_CMT1, SMSTPCR3); - - early_platform_add_devices(sh7377_early_devices, - ARRAY_SIZE(sh7377_early_devices)); - - /* setup early console here as well */ - shmobile_setup_console(); - - /* override timer setup with soc-specific code */ - shmobile_timer.init = sh7377_earlytimer_init; -} - -#ifdef CONFIG_USE_OF - -void __init sh7377_add_early_devices_dt(void) -{ - shmobile_setup_delay(600, 1, 3); /* Cortex-A8 @ 600MHz */ - - early_platform_add_devices(sh7377_early_devices, - ARRAY_SIZE(sh7377_early_devices)); - - /* setup early console here as well */ - shmobile_setup_console(); -} - -static const struct of_dev_auxdata sh7377_auxdata_lookup[] __initconst = { - { } -}; - -void __init sh7377_add_standard_devices_dt(void) -{ - /* clocks are setup late during boot in the case of DT */ - sh7377_clock_init(); - - platform_add_devices(sh7377_early_devices, - ARRAY_SIZE(sh7377_early_devices)); - - of_platform_populate(NULL, of_default_bus_match_table, - sh7377_auxdata_lookup, NULL); -} - -static const char *sh7377_boards_compat_dt[] __initdata = { - "renesas,sh7377", - NULL, -}; - -DT_MACHINE_START(SH7377_DT, "Generic SH7377 (Flattened Device Tree)") - .map_io = sh7377_map_io, - .init_early = sh7377_add_early_devices_dt, - .init_irq = sh7377_init_irq, - .handle_irq = shmobile_handle_irq_intc, - .init_machine = sh7377_add_standard_devices_dt, - .timer = &shmobile_timer, - .dt_compat = sh7377_boards_compat_dt, -MACHINE_END - -#endif /* CONFIG_USE_OF */ -- cgit v0.10.2 From 865d90f80384d62e6fbe835159cb674dec32ccb5 Mon Sep 17 00:00:00 2001 From: Bastian Hecht Date: Thu, 25 Oct 2012 12:58:20 +0200 Subject: ARM: shmobile: emev2: Replace modify_scu_cpu_psr with scu_power_mode We can remove the extra code of modify_scu_cpu_psr() and use the cleaner generic ARM helper scu_power_mode(). As every CPU only deals with its own power register and scu_power_mode() operates with 8-bit accesses, we save the locking overhead too. Signed-off-by: Bastian Hecht Signed-off-by: Simon Horman diff --git a/arch/arm/mach-shmobile/smp-emev2.c b/arch/arm/mach-shmobile/smp-emev2.c index f674562..535426c 100644 --- a/arch/arm/mach-shmobile/smp-emev2.c +++ b/arch/arm/mach-shmobile/smp-emev2.c @@ -32,24 +32,8 @@ #define EMEV2_SCU_BASE 0x1e000000 -static DEFINE_SPINLOCK(scu_lock); static void __iomem *scu_base; -static void modify_scu_cpu_psr(unsigned long set, unsigned long clr) -{ - unsigned long tmp; - - /* we assume this code is running on a different cpu - * than the one that is changing coherency setting */ - spin_lock(&scu_lock); - tmp = readl(scu_base + 8); - tmp &= ~clr; - tmp |= set; - writel(tmp, scu_base + 8); - spin_unlock(&scu_lock); - -} - static unsigned int __init emev2_get_core_count(void) { if (!scu_base) { @@ -95,7 +79,7 @@ static int __cpuinit emev2_boot_secondary(unsigned int cpu, struct task_struct * cpu = cpu_logical_map(cpu); /* enable cache coherency */ - modify_scu_cpu_psr(0, 3 << (cpu * 8)); + scu_power_mode(scu_base, 0); /* Tell ROM loader about our vector (in headsmp.S) */ emev2_set_boot_vector(__pa(shmobile_secondary_vector)); @@ -106,12 +90,10 @@ static int __cpuinit emev2_boot_secondary(unsigned int cpu, struct task_struct * static void __init emev2_smp_prepare_cpus(unsigned int max_cpus) { - int cpu = cpu_logical_map(0); - scu_enable(scu_base); /* enable cache coherency on CPU0 */ - modify_scu_cpu_psr(0, 3 << (cpu * 8)); + scu_power_mode(scu_base, 0); } static void __init emev2_smp_init_cpus(void) -- cgit v0.10.2 From e721295185535ed6ef4711eba156fbf5c24f9c5e Mon Sep 17 00:00:00 2001 From: Bastian Hecht Date: Thu, 25 Oct 2012 12:58:21 +0200 Subject: ARM: shmobile: sh73a0: Replace modify_scu_cpu_psr with scu_power_mode We can remove the extra code of modify_scu_cpu_psr() and use the cleaner generic ARM helper scu_power_mode(). As every CPU only deals with its own power register and scu_power_mode() operates with 8-bit accesses, we save the locking overhead too. Signed-off-by: Bastian Hecht Signed-off-by: Simon Horman diff --git a/arch/arm/mach-shmobile/smp-sh73a0.c b/arch/arm/mach-shmobile/smp-sh73a0.c index 624f00f..96ddb97 100644 --- a/arch/arm/mach-shmobile/smp-sh73a0.c +++ b/arch/arm/mach-shmobile/smp-sh73a0.c @@ -41,9 +41,6 @@ static void __iomem *scu_base_addr(void) return (void __iomem *)0xf0000000; } -static DEFINE_SPINLOCK(scu_lock); -static unsigned long tmp; - #ifdef CONFIG_HAVE_ARM_TWD static DEFINE_TWD_LOCAL_TIMER(twd_local_timer, 0xf0000600, 29); void __init sh73a0_register_twd(void) @@ -52,20 +49,6 @@ void __init sh73a0_register_twd(void) } #endif -static void modify_scu_cpu_psr(unsigned long set, unsigned long clr) -{ - void __iomem *scu_base = scu_base_addr(); - - spin_lock(&scu_lock); - tmp = __raw_readl(scu_base + 8); - tmp &= ~clr; - tmp |= set; - spin_unlock(&scu_lock); - - /* disable cache coherency after releasing the lock */ - __raw_writel(tmp, scu_base + 8); -} - static unsigned int __init sh73a0_get_core_count(void) { void __iomem *scu_base = scu_base_addr(); @@ -83,7 +66,7 @@ static int __cpuinit sh73a0_boot_secondary(unsigned int cpu, struct task_struct cpu = cpu_logical_map(cpu); /* enable cache coherency */ - modify_scu_cpu_psr(0, 3 << (cpu * 8)); + scu_power_mode(scu_base_addr(), 0); if (((__raw_readl(PSTR) >> (4 * cpu)) & 3) == 3) __raw_writel(1 << cpu, WUPCR); /* wake up */ @@ -95,8 +78,6 @@ static int __cpuinit sh73a0_boot_secondary(unsigned int cpu, struct task_struct static void __init sh73a0_smp_prepare_cpus(unsigned int max_cpus) { - int cpu = cpu_logical_map(0); - scu_enable(scu_base_addr()); /* Map the reset vector (in headsmp.S) */ @@ -104,7 +85,7 @@ static void __init sh73a0_smp_prepare_cpus(unsigned int max_cpus) __raw_writel(__pa(shmobile_secondary_vector), SBAR); /* enable cache coherency on CPU0 */ - modify_scu_cpu_psr(0, 3 << (cpu * 8)); + scu_power_mode(scu_base_addr(), 0); } static void __init sh73a0_smp_init_cpus(void) -- cgit v0.10.2 From cdc7594e5c5f7509a86b205edeedc58d72dd3999 Mon Sep 17 00:00:00 2001 From: Bastian Hecht Date: Thu, 25 Oct 2012 12:58:22 +0200 Subject: ARM: shmobile: r8a7779: Replace modify_scu_cpu_psr with scu_power_mode We can remove the extra code of modify_scu_cpu_psr() and use the cleaner generic ARM helper scu_power_mode(). As every CPU only deals with its own power register and scu_power_mode() operates with 8-bit accesses, we save the locking overhead too. Signed-off-by: Bastian Hecht Signed-off-by: Simon Horman diff --git a/arch/arm/mach-shmobile/smp-r8a7779.c b/arch/arm/mach-shmobile/smp-r8a7779.c index 2ce6af9..9def0f2 100644 --- a/arch/arm/mach-shmobile/smp-r8a7779.c +++ b/arch/arm/mach-shmobile/smp-r8a7779.c @@ -61,9 +61,6 @@ static void __iomem *scu_base_addr(void) return (void __iomem *)0xf0000000; } -static DEFINE_SPINLOCK(scu_lock); -static unsigned long tmp; - #ifdef CONFIG_HAVE_ARM_TWD static DEFINE_TWD_LOCAL_TIMER(twd_local_timer, 0xf0000600, 29); @@ -73,20 +70,6 @@ void __init r8a7779_register_twd(void) } #endif -static void modify_scu_cpu_psr(unsigned long set, unsigned long clr) -{ - void __iomem *scu_base = scu_base_addr(); - - spin_lock(&scu_lock); - tmp = __raw_readl(scu_base + 8); - tmp &= ~clr; - tmp |= set; - spin_unlock(&scu_lock); - - /* disable cache coherency after releasing the lock */ - __raw_writel(tmp, scu_base + 8); -} - static unsigned int __init r8a7779_get_core_count(void) { void __iomem *scu_base = scu_base_addr(); @@ -102,7 +85,7 @@ static int r8a7779_platform_cpu_kill(unsigned int cpu) cpu = cpu_logical_map(cpu); /* disable cache coherency */ - modify_scu_cpu_psr(3 << (cpu * 8), 0); + scu_power_mode(scu_base_addr(), 3); if (cpu < ARRAY_SIZE(r8a7779_ch_cpu)) ch = r8a7779_ch_cpu[cpu]; @@ -145,7 +128,7 @@ static int __cpuinit r8a7779_boot_secondary(unsigned int cpu, struct task_struct cpu = cpu_logical_map(cpu); /* enable cache coherency */ - modify_scu_cpu_psr(0, 3 << (cpu * 8)); + scu_power_mode(scu_base_addr(), 0); if (cpu < ARRAY_SIZE(r8a7779_ch_cpu)) ch = r8a7779_ch_cpu[cpu]; @@ -158,15 +141,13 @@ static int __cpuinit r8a7779_boot_secondary(unsigned int cpu, struct task_struct static void __init r8a7779_smp_prepare_cpus(unsigned int max_cpus) { - int cpu = cpu_logical_map(0); - scu_enable(scu_base_addr()); /* Map the reset vector (in headsmp.S) */ __raw_writel(__pa(shmobile_secondary_vector), AVECR); /* enable cache coherency on CPU0 */ - modify_scu_cpu_psr(0, 3 << (cpu * 8)); + scu_power_mode(scu_base_addr(), 0); r8a7779_pm_init(); -- cgit v0.10.2 From a41acc4ab923b2c3fd837669c45b87142fa88c9e Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Sun, 21 Oct 2012 22:15:13 -0700 Subject: ARM: shmobile: r8a7740: fixup DT machine desc name typo r8a7740 machine desc name should be R8A7740, not SH7372 Signed-off-by: Kuninori Morimoto Signed-off-by: Simon Horman diff --git a/arch/arm/mach-shmobile/setup-r8a7740.c b/arch/arm/mach-shmobile/setup-r8a7740.c index 11bb1d9..9777e2d 100644 --- a/arch/arm/mach-shmobile/setup-r8a7740.c +++ b/arch/arm/mach-shmobile/setup-r8a7740.c @@ -747,7 +747,7 @@ static const char *r8a7740_boards_compat_dt[] __initdata = { NULL, }; -DT_MACHINE_START(SH7372_DT, "Generic R8A7740 (Flattened Device Tree)") +DT_MACHINE_START(R8A7740_DT, "Generic R8A7740 (Flattened Device Tree)") .map_io = r8a7740_map_io, .init_early = r8a7740_add_early_devices_dt, .init_irq = r8a7740_init_irq, -- cgit v0.10.2 From f92246e61a4e1a2afae0701c557f65e6a8ecfe3d Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Wed, 10 Oct 2012 19:56:33 -0700 Subject: ARM: shmobile: r8a7779: add HSPI clock support Signed-off-by: Kuninori Morimoto Signed-off-by: Simon Horman diff --git a/arch/arm/mach-shmobile/clock-r8a7779.c b/arch/arm/mach-shmobile/clock-r8a7779.c index 3cafb6a..90d717b 100644 --- a/arch/arm/mach-shmobile/clock-r8a7779.c +++ b/arch/arm/mach-shmobile/clock-r8a7779.c @@ -89,6 +89,7 @@ static struct clk div4_clks[DIV4_NR] = { enum { MSTP323, MSTP322, MSTP321, MSTP320, MSTP026, MSTP025, MSTP024, MSTP023, MSTP022, MSTP021, MSTP016, MSTP015, MSTP014, + MSTP007, MSTP_NR }; static struct clk mstp_clks[MSTP_NR] = { @@ -105,6 +106,7 @@ static struct clk mstp_clks[MSTP_NR] = { [MSTP016] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 16, 0), /* TMU0 */ [MSTP015] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 15, 0), /* TMU1 */ [MSTP014] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 14, 0), /* TMU2 */ + [MSTP007] = SH_CLK_MSTP32(&div4_clks[DIV4_S], MSTPCR0, 7, 0), /* HSPI */ }; static unsigned long mul4_recalc(struct clk *clk) @@ -154,6 +156,9 @@ static struct clk_lookup lookups[] = { CLKDEV_DEV_ID("sh-sci.3", &mstp_clks[MSTP023]), /* SCIF3 */ CLKDEV_DEV_ID("sh-sci.4", &mstp_clks[MSTP022]), /* SCIF4 */ CLKDEV_DEV_ID("sh-sci.5", &mstp_clks[MSTP021]), /* SCIF6 */ + CLKDEV_DEV_ID("sh-hspi.0", &mstp_clks[MSTP007]), /* HSPI0 */ + CLKDEV_DEV_ID("sh-hspi.1", &mstp_clks[MSTP007]), /* HSPI1 */ + CLKDEV_DEV_ID("sh-hspi.2", &mstp_clks[MSTP007]), /* HSPI2 */ CLKDEV_DEV_ID("sh_mobile_sdhi.0", &mstp_clks[MSTP323]), /* SDHI0 */ CLKDEV_DEV_ID("sh_mobile_sdhi.1", &mstp_clks[MSTP322]), /* SDHI1 */ CLKDEV_DEV_ID("sh_mobile_sdhi.2", &mstp_clks[MSTP321]), /* SDHI2 */ -- cgit v0.10.2 From 16c40abcfa8738da9aa0e25b407bbf0dcbdd5e13 Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Wed, 10 Oct 2012 19:56:42 -0700 Subject: ARM: shmobile: r8a7779: add I2C clock support This patch is required from R-Car I2C driver Signed-off-by: Kuninori Morimoto Signed-off-by: Simon Horman diff --git a/arch/arm/mach-shmobile/clock-r8a7779.c b/arch/arm/mach-shmobile/clock-r8a7779.c index 90d717b..24f5a84 100644 --- a/arch/arm/mach-shmobile/clock-r8a7779.c +++ b/arch/arm/mach-shmobile/clock-r8a7779.c @@ -87,7 +87,8 @@ static struct clk div4_clks[DIV4_NR] = { }; enum { MSTP323, MSTP322, MSTP321, MSTP320, - MSTP026, MSTP025, MSTP024, MSTP023, MSTP022, MSTP021, + MSTP030, + MSTP029, MSTP028, MSTP027, MSTP026, MSTP025, MSTP024, MSTP023, MSTP022, MSTP021, MSTP016, MSTP015, MSTP014, MSTP007, MSTP_NR }; @@ -97,6 +98,10 @@ static struct clk mstp_clks[MSTP_NR] = { [MSTP322] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR3, 22, 0), /* SDHI1 */ [MSTP321] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR3, 21, 0), /* SDHI2 */ [MSTP320] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR3, 20, 0), /* SDHI3 */ + [MSTP030] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 30, 0), /* I2C0 */ + [MSTP029] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 29, 0), /* I2C1 */ + [MSTP028] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 28, 0), /* I2C2 */ + [MSTP027] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 27, 0), /* I2C3 */ [MSTP026] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 26, 0), /* SCIF0 */ [MSTP025] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 25, 0), /* SCIF1 */ [MSTP024] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 24, 0), /* SCIF2 */ @@ -150,6 +155,10 @@ static struct clk_lookup lookups[] = { /* MSTP32 clocks */ CLKDEV_DEV_ID("sh_tmu.0", &mstp_clks[MSTP016]), /* TMU00 */ CLKDEV_DEV_ID("sh_tmu.1", &mstp_clks[MSTP016]), /* TMU01 */ + CLKDEV_DEV_ID("i2c-rcar.0", &mstp_clks[MSTP030]), /* I2C0 */ + CLKDEV_DEV_ID("i2c-rcar.1", &mstp_clks[MSTP029]), /* I2C1 */ + CLKDEV_DEV_ID("i2c-rcar.2", &mstp_clks[MSTP028]), /* I2C2 */ + CLKDEV_DEV_ID("i2c-rcar.3", &mstp_clks[MSTP027]), /* I2C3 */ CLKDEV_DEV_ID("sh-sci.0", &mstp_clks[MSTP026]), /* SCIF0 */ CLKDEV_DEV_ID("sh-sci.1", &mstp_clks[MSTP025]), /* SCIF1 */ CLKDEV_DEV_ID("sh-sci.2", &mstp_clks[MSTP024]), /* SCIF2 */ -- cgit v0.10.2 From ccc2a27b15c978334927cea9f1156f019a01b833 Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Wed, 10 Oct 2012 19:56:51 -0700 Subject: ARM: shmobile: r8a7779: add I2C driver support This patch enable R-Car I2C driver Signed-off-by: Kuninori Morimoto Signed-off-by: Simon Horman diff --git a/arch/arm/configs/marzen_defconfig b/arch/arm/configs/marzen_defconfig index 53382b6..f79b55c 100644 --- a/arch/arm/configs/marzen_defconfig +++ b/arch/arm/configs/marzen_defconfig @@ -69,6 +69,8 @@ CONFIG_SERIAL_SH_SCI=y CONFIG_SERIAL_SH_SCI_NR_UARTS=6 CONFIG_SERIAL_SH_SCI_CONSOLE=y # CONFIG_HW_RANDOM is not set +CONFIG_I2C=y +CONFIG_I2C_RCAR=y CONFIG_GPIO_SYSFS=y # CONFIG_HWMON is not set CONFIG_THERMAL=y diff --git a/arch/arm/mach-shmobile/setup-r8a7779.c b/arch/arm/mach-shmobile/setup-r8a7779.c index 2917668..63de5cb 100644 --- a/arch/arm/mach-shmobile/setup-r8a7779.c +++ b/arch/arm/mach-shmobile/setup-r8a7779.c @@ -229,6 +229,79 @@ static struct platform_device tmu01_device = { .num_resources = ARRAY_SIZE(tmu01_resources), }; +/* I2C */ +static struct resource rcar_i2c0_res[] = { + { + .start = 0xffc70000, + .end = 0xffc70fff, + .flags = IORESOURCE_MEM, + }, { + .start = gic_spi(79), + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device i2c0_device = { + .name = "i2c-rcar", + .id = 0, + .resource = rcar_i2c0_res, + .num_resources = ARRAY_SIZE(rcar_i2c0_res), +}; + +static struct resource rcar_i2c1_res[] = { + { + .start = 0xffc71000, + .end = 0xffc71fff, + .flags = IORESOURCE_MEM, + }, { + .start = gic_spi(82), + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device i2c1_device = { + .name = "i2c-rcar", + .id = 1, + .resource = rcar_i2c1_res, + .num_resources = ARRAY_SIZE(rcar_i2c1_res), +}; + +static struct resource rcar_i2c2_res[] = { + { + .start = 0xffc72000, + .end = 0xffc72fff, + .flags = IORESOURCE_MEM, + }, { + .start = gic_spi(80), + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device i2c2_device = { + .name = "i2c-rcar", + .id = 2, + .resource = rcar_i2c2_res, + .num_resources = ARRAY_SIZE(rcar_i2c2_res), +}; + +static struct resource rcar_i2c3_res[] = { + { + .start = 0xffc73000, + .end = 0xffc73fff, + .flags = IORESOURCE_MEM, + }, { + .start = gic_spi(81), + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device i2c3_device = { + .name = "i2c-rcar", + .id = 3, + .resource = rcar_i2c3_res, + .num_resources = ARRAY_SIZE(rcar_i2c3_res), +}; + static struct platform_device *r8a7779_early_devices[] __initdata = { &scif0_device, &scif1_device, @@ -238,6 +311,10 @@ static struct platform_device *r8a7779_early_devices[] __initdata = { &scif5_device, &tmu00_device, &tmu01_device, + &i2c0_device, + &i2c1_device, + &i2c2_device, + &i2c3_device, }; static struct platform_device *r8a7779_late_devices[] __initdata = { -- cgit v0.10.2 From 40eaed7f7be18a53f9267d336d37f1e13b3a7f93 Mon Sep 17 00:00:00 2001 From: Bastian Hecht Date: Sat, 22 Sep 2012 14:06:38 +0200 Subject: ARM: mach-shmobile: add FLCTL DMA slave definitions for sh7372 SH7372 can use DMA with the FLCTL flash controller. Add required slave IDs and slave descriptors. Signed-off-by: Bastian Hecht Signed-off-by: Simon Horman diff --git a/arch/arm/mach-shmobile/include/mach/sh7372.h b/arch/arm/mach-shmobile/include/mach/sh7372.h index eb98b45..d65fbbe 100644 --- a/arch/arm/mach-shmobile/include/mach/sh7372.h +++ b/arch/arm/mach-shmobile/include/mach/sh7372.h @@ -452,6 +452,10 @@ enum { SHDMA_SLAVE_SCIF5_RX, SHDMA_SLAVE_SCIF6_TX, SHDMA_SLAVE_SCIF6_RX, + SHDMA_SLAVE_FLCTL0_TX, + SHDMA_SLAVE_FLCTL0_RX, + SHDMA_SLAVE_FLCTL1_TX, + SHDMA_SLAVE_FLCTL1_RX, SHDMA_SLAVE_SDHI0_RX, SHDMA_SLAVE_SDHI0_TX, SHDMA_SLAVE_SDHI1_RX, diff --git a/arch/arm/mach-shmobile/setup-sh7372.c b/arch/arm/mach-shmobile/setup-sh7372.c index a07954f..a360111 100644 --- a/arch/arm/mach-shmobile/setup-sh7372.c +++ b/arch/arm/mach-shmobile/setup-sh7372.c @@ -408,6 +408,26 @@ static const struct sh_dmae_slave_config sh7372_dmae_slaves[] = { .chcr = CHCR_RX(XMIT_SZ_8BIT), .mid_rid = 0x3e, }, { + .slave_id = SHDMA_SLAVE_FLCTL0_TX, + .addr = 0xe6a30050, + .chcr = CHCR_TX(XMIT_SZ_32BIT), + .mid_rid = 0x83, + }, { + .slave_id = SHDMA_SLAVE_FLCTL0_RX, + .addr = 0xe6a30050, + .chcr = CHCR_RX(XMIT_SZ_32BIT), + .mid_rid = 0x83, + }, { + .slave_id = SHDMA_SLAVE_FLCTL1_TX, + .addr = 0xe6a30060, + .chcr = CHCR_TX(XMIT_SZ_32BIT), + .mid_rid = 0x87, + }, { + .slave_id = SHDMA_SLAVE_FLCTL1_RX, + .addr = 0xe6a30060, + .chcr = CHCR_RX(XMIT_SZ_32BIT), + .mid_rid = 0x87, + }, { .slave_id = SHDMA_SLAVE_SDHI0_TX, .addr = 0xe6850030, .chcr = CHCR_TX(XMIT_SZ_16BIT), -- cgit v0.10.2 From 86bc52ef4373be64867b56f3a9e30cbabf64e0dd Mon Sep 17 00:00:00 2001 From: Nobuhiro Iwamatsu Date: Fri, 14 Sep 2012 13:27:13 +0900 Subject: ARM: shmobile: r8a7740: Enable PMU This patch enables PMU for r8a7740. Signed-off-by: Nobuhiro Iwamatsu [horms@verge.net.au: corrected indentation] Signed-off-by: Simon Horman diff --git a/arch/arm/configs/armadillo800eva_defconfig b/arch/arm/configs/armadillo800eva_defconfig index f78d259..3d76407 100644 --- a/arch/arm/configs/armadillo800eva_defconfig +++ b/arch/arm/configs/armadillo800eva_defconfig @@ -7,6 +7,7 @@ CONFIG_LOG_BUF_SHIFT=16 # CONFIG_IPC_NS is not set # CONFIG_PID_NS is not set CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_PERF_EVENTS=y CONFIG_SLAB=y CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y diff --git a/arch/arm/mach-shmobile/setup-r8a7740.c b/arch/arm/mach-shmobile/setup-r8a7740.c index 9777e2d..6ac242c 100644 --- a/arch/arm/mach-shmobile/setup-r8a7740.c +++ b/arch/arm/mach-shmobile/setup-r8a7740.c @@ -590,6 +590,21 @@ static struct platform_device i2c1_device = { .num_resources = ARRAY_SIZE(i2c1_resources), }; +static struct resource pmu_resources[] = { + [0] = { + .start = evt2irq(0x19a0), + .end = evt2irq(0x19a0), + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device pmu_device = { + .name = "arm-pmu", + .id = -1, + .num_resources = ARRAY_SIZE(pmu_resources), + .resource = pmu_resources, +}; + static struct platform_device *r8a7740_late_devices[] __initdata = { &i2c0_device, &i2c1_device, @@ -597,6 +612,7 @@ static struct platform_device *r8a7740_late_devices[] __initdata = { &dma1_device, &dma2_device, &usb_dma_device, + &pmu_device, }; /* -- cgit v0.10.2 From a7e816b857947f0a4d59c0d9c69810977479ac50 Mon Sep 17 00:00:00 2001 From: Olof Johansson Date: Tue, 6 Nov 2012 11:09:10 -0800 Subject: ARM: highbank: add ifdef guards to core.h Fixes build error due to multiple includes: In file included from arch/arm/mach-highbank/sysregs.h:23:0, from arch/arm/mach-highbank/system.c:20: arch/arm/mach-highbank/core.h:8:91: error: redefinition of 'highbank_lluart_map_io' In file included from arch/arm/mach-highbank/system.c:19:0: arch/arm/mach-highbank/core.h:8:91: note: previous definition of 'highbank_lluart_map_io' was here Signed-off-by: Olof Johansson diff --git a/arch/arm/mach-highbank/core.h b/arch/arm/mach-highbank/core.h index 286ec82..068c687 100644 --- a/arch/arm/mach-highbank/core.h +++ b/arch/arm/mach-highbank/core.h @@ -1,3 +1,6 @@ +#ifndef __HIGHBANK_CORE_H +#define __HIGHBANK_CORE_H + extern void highbank_set_cpu_jump(int cpu, void *jump_addr); extern void highbank_clocks_init(void); extern void highbank_restart(char, const char *); @@ -18,3 +21,5 @@ extern void highbank_smc1(int fn, int arg); extern void highbank_cpu_die(unsigned int cpu); extern struct smp_operations highbank_smp_ops; + +#endif -- cgit v0.10.2 From 5bd09fb0336aa4020b85f13e16a4d21e3f5f70c3 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Tue, 6 Nov 2012 23:02:27 +0100 Subject: ARM: smp_twd: fix build warning 0336517b38c "ARM: smp_twd: don't warn on no DT node" introduced a silly build warning by returning an error from a void function. This keeps the intention of that patch but fixes the warning by removing the error code Signed-off-by: Arnd Bergmann diff --git a/arch/arm/kernel/smp_twd.c b/arch/arm/kernel/smp_twd.c index 6ec73f9..999aa48 100644 --- a/arch/arm/kernel/smp_twd.c +++ b/arch/arm/kernel/smp_twd.c @@ -367,7 +367,7 @@ void __init twd_local_timer_of_register(void) np = of_find_matching_node(NULL, twd_of_match); if (!np) - return -ENODEV; + return; twd_ppi = irq_of_parse_and_map(np, 0); if (!twd_ppi) { -- cgit v0.10.2 From 167443b16e3b9875e0541701b96e4009be8360f0 Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Mon, 29 Oct 2012 01:14:31 -0700 Subject: ARM: shmobile: r8a7779: PFC rename PENCx -> USB_PENCx PENCx is Power Enable Control pin for USB. Signed-off-by: Kuninori Morimoto Signed-off-by: Simon Horman diff --git a/arch/arm/mach-shmobile/include/mach/r8a7779.h b/arch/arm/mach-shmobile/include/mach/r8a7779.h index 499f52d..8ab0cd6 100644 --- a/arch/arm/mach-shmobile/include/mach/r8a7779.h +++ b/arch/arm/mach-shmobile/include/mach/r8a7779.h @@ -71,7 +71,7 @@ enum { GPIO_FN_A19, /* IPSR0 */ - GPIO_FN_PENC2, GPIO_FN_SCK0, GPIO_FN_PWM1, GPIO_FN_PWMFSW0, + GPIO_FN_USB_PENC2, GPIO_FN_SCK0, GPIO_FN_PWM1, GPIO_FN_PWMFSW0, GPIO_FN_SCIF_CLK, GPIO_FN_TCLK0_C, GPIO_FN_BS, GPIO_FN_SD1_DAT2, GPIO_FN_MMC0_D2, GPIO_FN_FD2, GPIO_FN_ATADIR0, GPIO_FN_SDSELF, GPIO_FN_HCTS1, GPIO_FN_TX4_C, GPIO_FN_A0, GPIO_FN_SD1_DAT3, diff --git a/arch/arm/mach-shmobile/pfc-r8a7779.c b/arch/arm/mach-shmobile/pfc-r8a7779.c index cbc26ba..9513234 100644 --- a/arch/arm/mach-shmobile/pfc-r8a7779.c +++ b/arch/arm/mach-shmobile/pfc-r8a7779.c @@ -140,7 +140,7 @@ enum { FN_IP7_3_2, FN_IP7_6_4, FN_IP7_9_7, FN_IP7_12_10, FN_IP7_14_13, FN_IP2_7_4, FN_IP2_11_8, FN_IP2_15_12, FN_IP1_28_25, FN_IP2_3_0, FN_IP8_3_0, FN_IP8_7_4, - FN_IP8_11_8, FN_IP8_15_12, FN_PENC0, FN_PENC1, + FN_IP8_11_8, FN_IP8_15_12, FN_USB_PENC0, FN_USB_PENC1, FN_IP0_2_0, FN_IP8_17_16, FN_IP8_18, FN_IP8_19, /* GPSR5 */ @@ -176,7 +176,7 @@ enum { FN_A0, FN_SD1_DAT3, FN_MMC0_D3, FN_FD3, FN_BS, FN_SD1_DAT2, FN_MMC0_D2, FN_FD2, FN_ATADIR0, FN_SDSELF, FN_HCTS1, FN_TX4_C, - FN_PENC2, FN_SCK0, FN_PWM1, FN_PWMFSW0, + FN_USB_PENC2, FN_SCK0, FN_PWM1, FN_PWMFSW0, FN_SCIF_CLK, FN_TCLK0_C, /* IPSR1 */ @@ -447,7 +447,7 @@ enum { A0_MARK, SD1_DAT3_MARK, MMC0_D3_MARK, FD3_MARK, BS_MARK, SD1_DAT2_MARK, MMC0_D2_MARK, FD2_MARK, ATADIR0_MARK, SDSELF_MARK, HCTS1_MARK, TX4_C_MARK, - PENC2_MARK, SCK0_MARK, PWM1_MARK, PWMFSW0_MARK, + USB_PENC2_MARK, SCK0_MARK, PWM1_MARK, PWMFSW0_MARK, SCIF_CLK_MARK, TCLK0_C_MARK, EX_CS0_MARK, RX3_C_IRDA_RX_C_MARK, MMC0_D6_MARK, @@ -658,7 +658,7 @@ static pinmux_enum_t pinmux_data[] = { PINMUX_DATA(A18_MARK, FN_A18), PINMUX_DATA(A19_MARK, FN_A19), - PINMUX_IPSR_DATA(IP0_2_0, PENC2), + PINMUX_IPSR_DATA(IP0_2_0, USB_PENC2), PINMUX_IPSR_MODSEL_DATA(IP0_2_0, SCK0, SEL_SCIF0_0), PINMUX_IPSR_DATA(IP0_2_0, PWM1), PINMUX_IPSR_MODSEL_DATA(IP0_2_0, PWMFSW0, SEL_PWMFSW_0), @@ -1456,7 +1456,7 @@ static struct pinmux_gpio pinmux_gpios[] = { GPIO_FN(A19), /* IPSR0 */ - GPIO_FN(PENC2), GPIO_FN(SCK0), GPIO_FN(PWM1), GPIO_FN(PWMFSW0), + GPIO_FN(USB_PENC2), GPIO_FN(SCK0), GPIO_FN(PWM1), GPIO_FN(PWMFSW0), GPIO_FN(SCIF_CLK), GPIO_FN(TCLK0_C), GPIO_FN(BS), GPIO_FN(SD1_DAT2), GPIO_FN(MMC0_D2), GPIO_FN(FD2), GPIO_FN(ATADIR0), GPIO_FN(SDSELF), GPIO_FN(HCTS1), GPIO_FN(TX4_C), GPIO_FN(A0), GPIO_FN(SD1_DAT3), @@ -1865,8 +1865,8 @@ static struct pinmux_cfg_reg pinmux_config_regs[] = { GP_4_30_FN, FN_IP8_18, GP_4_29_FN, FN_IP8_17_16, GP_4_28_FN, FN_IP0_2_0, - GP_4_27_FN, FN_PENC1, - GP_4_26_FN, FN_PENC0, + GP_4_27_FN, FN_USB_PENC1, + GP_4_26_FN, FN_USB_PENC0, GP_4_25_FN, FN_IP8_15_12, GP_4_24_FN, FN_IP8_11_8, GP_4_23_FN, FN_IP8_7_4, @@ -1981,7 +1981,7 @@ static struct pinmux_cfg_reg pinmux_config_regs[] = { FN_BS, FN_SD1_DAT2, FN_MMC0_D2, FN_FD2, FN_ATADIR0, FN_SDSELF, FN_HCTS1, FN_TX4_C, /* IP0_2_0 [3] */ - FN_PENC2, FN_SCK0, FN_PWM1, FN_PWMFSW0, + FN_USB_PENC2, FN_SCK0, FN_PWM1, FN_PWMFSW0, FN_SCIF_CLK, FN_TCLK0_C, 0, 0 } }, { PINMUX_CFG_REG_VAR("IPSR1", 0xfffc0024, 32, -- cgit v0.10.2 From 0a3842900429c2b59fe5d5d9c182cb8f63bd955c Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Mon, 29 Oct 2012 01:14:41 -0700 Subject: ARM: shmobile: r8a7740: add USB24 clock explain USBCKCR is controlling USB parent clock and divide rate. This parent clock is used as a "usb24s" from other devices, but the "divide rate" is not used. Further, this clock itself is known as "usb24". So, to set this clock is a little confusable. This patch adds quick explain and sample settings for this clock. Signed-off-by: Kuninori Morimoto Signed-off-by: Simon Horman diff --git a/arch/arm/mach-shmobile/clock-r8a7740.c b/arch/arm/mach-shmobile/clock-r8a7740.c index 6729e00..c012bbf 100644 --- a/arch/arm/mach-shmobile/clock-r8a7740.c +++ b/arch/arm/mach-shmobile/clock-r8a7740.c @@ -188,6 +188,22 @@ static struct clk pllc1_div2_clk = { }; /* USB clock */ +/* + * USBCKCR is controlling usb24 clock + * bit[7] : parent clock + * bit[6] : clock divide rate + * And this bit[7] is used as a "usb24s" from other devices. + * (Video clock / Sub clock / SPU clock) + * You can controll this clock as a below. + * + * struct clk *usb24 = clk_get(dev, "usb24"); + * struct clk *usb24s = clk_get(NULL, "usb24s"); + * struct clk *system = clk_get(NULL, "system_clk"); + * int rate = clk_get_rate(system); + * + * clk_set_parent(usb24s, system); // for bit[7] + * clk_set_rate(usb24, rate / 2); // for bit[6] + */ static struct clk *usb24s_parents[] = { [0] = &system_clk, [1] = &extal2_clk -- cgit v0.10.2 From 88419548f23c01c7b8def25baab87ea6bc79c9cf Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Mon, 29 Oct 2012 01:15:00 -0700 Subject: ARM: shmobile: r8a7779: add USB EHCI clock support ehci-platform driver require these clocks Signed-off-by: Kuninori Morimoto Signed-off-by: Simon Horman diff --git a/arch/arm/mach-shmobile/clock-r8a7779.c b/arch/arm/mach-shmobile/clock-r8a7779.c index 24f5a84..4ba4e3c 100644 --- a/arch/arm/mach-shmobile/clock-r8a7779.c +++ b/arch/arm/mach-shmobile/clock-r8a7779.c @@ -87,6 +87,7 @@ static struct clk div4_clks[DIV4_NR] = { }; enum { MSTP323, MSTP322, MSTP321, MSTP320, + MSTP101, MSTP100, MSTP030, MSTP029, MSTP028, MSTP027, MSTP026, MSTP025, MSTP024, MSTP023, MSTP022, MSTP021, MSTP016, MSTP015, MSTP014, @@ -98,6 +99,8 @@ static struct clk mstp_clks[MSTP_NR] = { [MSTP322] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR3, 22, 0), /* SDHI1 */ [MSTP321] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR3, 21, 0), /* SDHI2 */ [MSTP320] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR3, 20, 0), /* SDHI3 */ + [MSTP101] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR1, 1, 0), /* USB2 */ + [MSTP100] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR1, 0, 0), /* USB0/1 */ [MSTP030] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 30, 0), /* I2C0 */ [MSTP029] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 29, 0), /* I2C1 */ [MSTP028] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 28, 0), /* I2C2 */ @@ -153,6 +156,8 @@ static struct clk_lookup lookups[] = { CLKDEV_CON_ID("peripheral_clk", &div4_clks[DIV4_P]), /* MSTP32 clocks */ + CLKDEV_DEV_ID("ehci-platform.1", &mstp_clks[MSTP101]), /* USB EHCI port2 */ + CLKDEV_DEV_ID("ehci-platform.0", &mstp_clks[MSTP100]), /* USB EHCI port0/1 */ CLKDEV_DEV_ID("sh_tmu.0", &mstp_clks[MSTP016]), /* TMU00 */ CLKDEV_DEV_ID("sh_tmu.1", &mstp_clks[MSTP016]), /* TMU01 */ CLKDEV_DEV_ID("i2c-rcar.0", &mstp_clks[MSTP030]), /* I2C0 */ -- cgit v0.10.2 From 9d69f5b87e7f6df51ad2a70557474093de934a8c Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Mon, 29 Oct 2012 01:15:11 -0700 Subject: ARM: shmobile: r8a7779: add USB OHCI clock support ohci-platform driver require these clocks Signed-off-by: Kuninori Morimoto Signed-off-by: Simon Horman diff --git a/arch/arm/mach-shmobile/clock-r8a7779.c b/arch/arm/mach-shmobile/clock-r8a7779.c index 4ba4e3c..be885cf 100644 --- a/arch/arm/mach-shmobile/clock-r8a7779.c +++ b/arch/arm/mach-shmobile/clock-r8a7779.c @@ -157,7 +157,9 @@ static struct clk_lookup lookups[] = { /* MSTP32 clocks */ CLKDEV_DEV_ID("ehci-platform.1", &mstp_clks[MSTP101]), /* USB EHCI port2 */ + CLKDEV_DEV_ID("ohci-platform.1", &mstp_clks[MSTP101]), /* USB OHCI port2 */ CLKDEV_DEV_ID("ehci-platform.0", &mstp_clks[MSTP100]), /* USB EHCI port0/1 */ + CLKDEV_DEV_ID("ohci-platform.0", &mstp_clks[MSTP100]), /* USB OHCI port0/1 */ CLKDEV_DEV_ID("sh_tmu.0", &mstp_clks[MSTP016]), /* TMU00 */ CLKDEV_DEV_ID("sh_tmu.1", &mstp_clks[MSTP016]), /* TMU01 */ CLKDEV_DEV_ID("i2c-rcar.0", &mstp_clks[MSTP030]), /* I2C0 */ -- cgit v0.10.2 From 2998b1d3b1ee31e1c21085383226be1b0c496eab Mon Sep 17 00:00:00 2001 From: Roland Stigge Date: Wed, 7 Nov 2012 13:30:50 +0100 Subject: ARM: LPC32xx: Remove superfluous irq_alloc_descs() This patch removes the call to irq_alloc_descs() which always returns an error since the descriptors are always preallocated already. Signed-off-by: Roland Stigge diff --git a/arch/arm/mach-lpc32xx/irq.c b/arch/arm/mach-lpc32xx/irq.c index 3c63327..54c68b1 100644 --- a/arch/arm/mach-lpc32xx/irq.c +++ b/arch/arm/mach-lpc32xx/irq.c @@ -412,7 +412,6 @@ static const struct of_device_id mic_of_match[] __initconst = { void __init lpc32xx_init_irq(void) { unsigned int i; - int irq_base; /* Setup MIC */ __raw_writel(0, LPC32XX_INTC_MASK(LPC32XX_MIC_BASE)); @@ -475,15 +474,8 @@ void __init lpc32xx_init_irq(void) of_irq_init(mic_of_match); - irq_base = irq_alloc_descs(-1, 0, NR_IRQS, 0); - if (irq_base < 0) { - pr_warn("Cannot allocate irq_descs, assuming pre-allocated\n"); - irq_base = 0; - } - lpc32xx_mic_domain = irq_domain_add_legacy(lpc32xx_mic_np, NR_IRQS, - irq_base, 0, - &irq_domain_simple_ops, + 0, 0, &irq_domain_simple_ops, NULL); if (!lpc32xx_mic_domain) panic("Unable to add MIC irq domain\n"); -- cgit v0.10.2 From e40ec953b6ac21257760730af8c36e2695e4beac Mon Sep 17 00:00:00 2001 From: Roland Stigge Date: Wed, 7 Nov 2012 13:30:50 +0100 Subject: ARM: LPC32xx: Relocate calls to irq_set_chained_handler() This patch fixes the issue of an access to a yet uninitialized data structure at the point where irq_set_chained_handler() was called by moving the respective calls to the end of lpc32xx_init_irq(). The call path was: irq_set_chained_handler() -> __irq_set_handler() -> irq_startup() -> irq_enable() -> desc->irq_data.chip->irq_unmask() at which point lpc32xx_unmask_irq() effectively read desc->irq_data.hwirq which was only later initialized. Signed-off-by: Roland Stigge diff --git a/arch/arm/mach-lpc32xx/irq.c b/arch/arm/mach-lpc32xx/irq.c index 54c68b1..f062296 100644 --- a/arch/arm/mach-lpc32xx/irq.c +++ b/arch/arm/mach-lpc32xx/irq.c @@ -447,10 +447,6 @@ void __init lpc32xx_init_irq(void) __raw_writel(0, LPC32XX_INTC_MASK(LPC32XX_SIC1_BASE)); __raw_writel(0, LPC32XX_INTC_MASK(LPC32XX_SIC2_BASE)); - /* MIC SUBIRQx interrupts will route handling to the chain handlers */ - irq_set_chained_handler(IRQ_LPC32XX_SUB1IRQ, lpc32xx_sic1_handler); - irq_set_chained_handler(IRQ_LPC32XX_SUB2IRQ, lpc32xx_sic2_handler); - /* Initially disable all wake events */ __raw_writel(0, LPC32XX_CLKPWR_P01_ER); __raw_writel(0, LPC32XX_CLKPWR_INT_ER); @@ -479,4 +475,8 @@ void __init lpc32xx_init_irq(void) NULL); if (!lpc32xx_mic_domain) panic("Unable to add MIC irq domain\n"); + + /* MIC SUBIRQx interrupts will route handling to the chain handlers */ + irq_set_chained_handler(IRQ_LPC32XX_SUB1IRQ, lpc32xx_sic1_handler); + irq_set_chained_handler(IRQ_LPC32XX_SUB2IRQ, lpc32xx_sic2_handler); } -- cgit v0.10.2 From 91deef8069e7ffafac4467200e1d37af1b2d7c56 Mon Sep 17 00:00:00 2001 From: Roland Stigge Date: Wed, 7 Nov 2012 13:30:50 +0100 Subject: ARM: LPC32xx: Cleanup irq.c This patch removes the IRQ mask initialization which is already done some lines above. This was actually a bug: The init was supposed to set the bits for the (chained) SUB IRQs. But this is already fixed by the previous patch, doing this implicitely via irq_set_chained_handler(). Signed-off-by: Roland Stigge diff --git a/arch/arm/mach-lpc32xx/irq.c b/arch/arm/mach-lpc32xx/irq.c index f062296..9ecb8f9 100644 --- a/arch/arm/mach-lpc32xx/irq.c +++ b/arch/arm/mach-lpc32xx/irq.c @@ -442,11 +442,6 @@ void __init lpc32xx_init_irq(void) lpc32xx_set_default_mappings(SIC1_APR_DEFAULT, SIC1_ATR_DEFAULT, 32); lpc32xx_set_default_mappings(SIC2_APR_DEFAULT, SIC2_ATR_DEFAULT, 64); - /* mask all interrupts except SUBIRQ */ - __raw_writel(0, LPC32XX_INTC_MASK(LPC32XX_MIC_BASE)); - __raw_writel(0, LPC32XX_INTC_MASK(LPC32XX_SIC1_BASE)); - __raw_writel(0, LPC32XX_INTC_MASK(LPC32XX_SIC2_BASE)); - /* Initially disable all wake events */ __raw_writel(0, LPC32XX_CLKPWR_P01_ER); __raw_writel(0, LPC32XX_CLKPWR_INT_ER); -- cgit v0.10.2 From be6a98d3f00c292d347465d96acbec9d8c2783cf Mon Sep 17 00:00:00 2001 From: Rob Herring Date: Fri, 12 Oct 2012 12:45:34 -0500 Subject: cpuidle: add Calxeda SOC idle support Add support for core powergating on Calxeda platforms. Initially, this supports ECX-1000 (highbank), but support will be added for ECX-2000 later. Signed-off-by: Rob Herring Cc: Len Brown Cc: "Rafael J. Wysocki" diff --git a/drivers/cpuidle/Kconfig b/drivers/cpuidle/Kconfig index a76b689..d2d007b 100644 --- a/drivers/cpuidle/Kconfig +++ b/drivers/cpuidle/Kconfig @@ -21,3 +21,13 @@ config CPU_IDLE_GOV_MENU config ARCH_NEEDS_CPU_IDLE_COUPLED def_bool n + +if CPU_IDLE + +config CPU_IDLE_CALXEDA + bool "CPU Idle Driver for Calxeda processors" + depends on ARCH_HIGHBANK + help + Select this to enable cpuidle on Calxeda processors. + +endif diff --git a/drivers/cpuidle/Makefile b/drivers/cpuidle/Makefile index 38c8f69..03ee874 100644 --- a/drivers/cpuidle/Makefile +++ b/drivers/cpuidle/Makefile @@ -4,3 +4,5 @@ obj-y += cpuidle.o driver.o governor.o sysfs.o governors/ obj-$(CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED) += coupled.o + +obj-$(CONFIG_CPU_IDLE_CALXEDA) += cpuidle-calxeda.o diff --git a/drivers/cpuidle/cpuidle-calxeda.c b/drivers/cpuidle/cpuidle-calxeda.c new file mode 100644 index 0000000..e1aab38 --- /dev/null +++ b/drivers/cpuidle/cpuidle-calxeda.c @@ -0,0 +1,161 @@ +/* + * Copyright 2012 Calxeda, Inc. + * + * Based on arch/arm/plat-mxc/cpuidle.c: + * Copyright 2012 Freescale Semiconductor, Inc. + * Copyright 2012 Linaro Ltd. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program. If not, see . + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +extern void highbank_set_cpu_jump(int cpu, void *jump_addr); +extern void *scu_base_addr; + +static struct cpuidle_device __percpu *calxeda_idle_cpuidle_devices; + +static inline unsigned int get_auxcr(void) +{ + unsigned int val; + asm("mrc p15, 0, %0, c1, c0, 1 @ get AUXCR" : "=r" (val) : : "cc"); + return val; +} + +static inline void set_auxcr(unsigned int val) +{ + asm volatile("mcr p15, 0, %0, c1, c0, 1 @ set AUXCR" + : : "r" (val) : "cc"); + isb(); +} + +static noinline void calxeda_idle_restore(void) +{ + set_cr(get_cr() | CR_C); + set_auxcr(get_auxcr() | 0x40); + scu_power_mode(scu_base_addr, SCU_PM_NORMAL); +} + +static int calxeda_idle_finish(unsigned long val) +{ + /* Already flushed cache, but do it again as the outer cache functions + * dirty the cache with spinlocks */ + flush_cache_all(); + + set_auxcr(get_auxcr() & ~0x40); + set_cr(get_cr() & ~CR_C); + + scu_power_mode(scu_base_addr, SCU_PM_DORMANT); + + cpu_do_idle(); + + /* Restore things if we didn't enter power-gating */ + calxeda_idle_restore(); + return 1; +} + +static int calxeda_pwrdown_idle(struct cpuidle_device *dev, + struct cpuidle_driver *drv, + int index) +{ + highbank_set_cpu_jump(smp_processor_id(), cpu_resume); + cpu_suspend(0, calxeda_idle_finish); + return index; +} + +static void calxeda_idle_cpuidle_devices_uninit(void) +{ + int i; + struct cpuidle_device *dev; + + for_each_possible_cpu(i) { + dev = per_cpu_ptr(calxeda_idle_cpuidle_devices, i); + cpuidle_unregister_device(dev); + } + + free_percpu(calxeda_idle_cpuidle_devices); +} + +static struct cpuidle_driver calxeda_idle_driver = { + .name = "calxeda_idle", + .en_core_tk_irqen = 1, + .states = { + ARM_CPUIDLE_WFI_STATE, + { + .name = "PG", + .desc = "Power Gate", + .flags = CPUIDLE_FLAG_TIME_VALID, + .exit_latency = 30, + .power_usage = 50, + .target_residency = 200, + .enter = calxeda_pwrdown_idle, + }, + }, + .state_count = 2, +}; + +static int __init calxeda_cpuidle_init(void) +{ + int cpu_id; + int ret; + struct cpuidle_device *dev; + struct cpuidle_driver *drv = &calxeda_idle_driver; + + if (!of_machine_is_compatible("calxeda,highbank")) + return -ENODEV; + + ret = cpuidle_register_driver(drv); + if (ret) + return ret; + + calxeda_idle_cpuidle_devices = alloc_percpu(struct cpuidle_device); + if (calxeda_idle_cpuidle_devices == NULL) { + ret = -ENOMEM; + goto unregister_drv; + } + + /* initialize state data for each cpuidle_device */ + for_each_possible_cpu(cpu_id) { + dev = per_cpu_ptr(calxeda_idle_cpuidle_devices, cpu_id); + dev->cpu = cpu_id; + dev->state_count = drv->state_count; + + ret = cpuidle_register_device(dev); + if (ret) { + pr_err("Failed to register cpu %u, error: %d\n", + cpu_id, ret); + goto uninit; + } + } + + return 0; + +uninit: + calxeda_idle_cpuidle_devices_uninit(); +unregister_drv: + cpuidle_unregister_driver(drv); + return ret; +} +module_init(calxeda_cpuidle_init); -- cgit v0.10.2 From 52530343331dc111e0899bfc976f21ace5b5c95c Mon Sep 17 00:00:00 2001 From: Rob Herring Date: Sat, 27 Oct 2012 15:38:22 -0500 Subject: ARM: highbank: use common debug_ll_io_init Remove the platform static mapping code for uart and use the common debug_ll_io_init function. Signed-off-by: Rob Herring diff --git a/arch/arm/mach-highbank/Makefile b/arch/arm/mach-highbank/Makefile index 3ec8bdd..8a1ef57 100644 --- a/arch/arm/mach-highbank/Makefile +++ b/arch/arm/mach-highbank/Makefile @@ -3,7 +3,6 @@ obj-y := highbank.o system.o smc.o plus_sec := $(call as-instr,.arch_extension sec,+sec) AFLAGS_smc.o :=-Wa,-march=armv7-a$(plus_sec) -obj-$(CONFIG_DEBUG_HIGHBANK_UART) += lluart.o obj-$(CONFIG_SMP) += platsmp.o obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o obj-$(CONFIG_PM_SLEEP) += pm.o diff --git a/arch/arm/mach-highbank/core.h b/arch/arm/mach-highbank/core.h index 286ec82..603b536 100644 --- a/arch/arm/mach-highbank/core.h +++ b/arch/arm/mach-highbank/core.h @@ -2,11 +2,6 @@ extern void highbank_set_cpu_jump(int cpu, void *jump_addr); extern void highbank_clocks_init(void); extern void highbank_restart(char, const char *); extern void __iomem *scu_base_addr; -#ifdef CONFIG_DEBUG_HIGHBANK_UART -extern void highbank_lluart_map_io(void); -#else -static inline void highbank_lluart_map_io(void) {} -#endif #ifdef CONFIG_PM_SLEEP extern void highbank_pm_init(void); diff --git a/arch/arm/mach-highbank/highbank.c b/arch/arm/mach-highbank/highbank.c index 3e60e57..dc24816 100644 --- a/arch/arm/mach-highbank/highbank.c +++ b/arch/arm/mach-highbank/highbank.c @@ -35,6 +35,7 @@ #include #include #include +#include #include #include "core.h" @@ -53,11 +54,6 @@ static void __init highbank_scu_map_io(void) scu_base_addr = ioremap(base, SZ_4K); } -static void __init highbank_map_io(void) -{ - highbank_lluart_map_io(); -} - #define HB_JUMP_TABLE_PHYS(cpu) (0x40 + (0x10 * (cpu))) #define HB_JUMP_TABLE_VIRT(cpu) phys_to_virt(HB_JUMP_TABLE_PHYS(cpu)) @@ -211,7 +207,7 @@ static const char *highbank_match[] __initconst = { DT_MACHINE_START(HIGHBANK, "Highbank") .smp = smp_ops(highbank_smp_ops), - .map_io = highbank_map_io, + .map_io = debug_ll_io_init, .init_irq = highbank_init_irq, .timer = &highbank_timer, .handle_irq = gic_handle_irq, diff --git a/arch/arm/mach-highbank/lluart.c b/arch/arm/mach-highbank/lluart.c deleted file mode 100644 index 3715750..0000000 --- a/arch/arm/mach-highbank/lluart.c +++ /dev/null @@ -1,34 +0,0 @@ -/* - * Copyright 2011 Calxeda, Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms and conditions of the GNU General Public License, - * version 2, as published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License along with - * this program. If not, see . - */ -#include -#include -#include -#include - -#define HB_DEBUG_LL_PHYS_BASE 0xfff36000 -#define HB_DEBUG_LL_VIRT_BASE 0xfee36000 - -static struct map_desc lluart_io_desc __initdata = { - .virtual = HB_DEBUG_LL_VIRT_BASE, - .pfn = __phys_to_pfn(HB_DEBUG_LL_PHYS_BASE), - .length = SZ_4K, - .type = MT_DEVICE, -}; - -void __init highbank_lluart_map_io(void) -{ - iotable_init(&lluart_io_desc, 1); -} -- cgit v0.10.2 From 9d626eccb1de90a310f3fb9bc5e8803706be1a95 Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Tue, 30 Oct 2012 20:06:55 -0700 Subject: sh: clkfwk: add sh_clk_fsidiv_register() This patch adds sh_clk_fsidiv_register() to share FSI-DIV clock code Signed-off-by: Kuninori Morimoto Acked-by: Paul Mundt Signed-off-by: Simon Horman diff --git a/drivers/sh/clk/cpg.c b/drivers/sh/clk/cpg.c index 07e9fb4..b3dc441 100644 --- a/drivers/sh/clk/cpg.c +++ b/drivers/sh/clk/cpg.c @@ -361,3 +361,89 @@ int __init sh_clk_div4_reparent_register(struct clk *clks, int nr, return sh_clk_div_register_ops(clks, nr, table, &sh_clk_div4_reparent_clk_ops); } + +/* FSI-DIV */ +static unsigned long fsidiv_recalc(struct clk *clk) +{ + u32 value; + + value = __raw_readl(clk->mapping->base); + + value >>= 16; + if (value < 2) + return clk->parent->rate; + + return clk->parent->rate / value; +} + +static long fsidiv_round_rate(struct clk *clk, unsigned long rate) +{ + return clk_rate_div_range_round(clk, 1, 0xffff, rate); +} + +static void fsidiv_disable(struct clk *clk) +{ + __raw_writel(0, clk->mapping->base); +} + +static int fsidiv_enable(struct clk *clk) +{ + u32 value; + + value = __raw_readl(clk->mapping->base) >> 16; + if (value < 2) + return 0; + + __raw_writel((value << 16) | 0x3, clk->mapping->base); + + return 0; +} + +static int fsidiv_set_rate(struct clk *clk, unsigned long rate) +{ + u32 val; + int idx; + + idx = (clk->parent->rate / rate) & 0xffff; + if (idx < 2) + __raw_writel(0, clk->mapping->base); + else + __raw_writel(idx << 16, clk->mapping->base); + + return 0; +} + +static struct sh_clk_ops fsidiv_clk_ops = { + .recalc = fsidiv_recalc, + .round_rate = fsidiv_round_rate, + .set_rate = fsidiv_set_rate, + .enable = fsidiv_enable, + .disable = fsidiv_disable, +}; + +int __init sh_clk_fsidiv_register(struct clk *clks, int nr) +{ + struct clk_mapping *map; + int i; + + for (i = 0; i < nr; i++) { + + map = kzalloc(sizeof(struct clk_mapping), GFP_KERNEL); + if (!map) { + pr_err("%s: unable to alloc memory\n", __func__); + return -ENOMEM; + } + + /* clks[i].enable_reg came from SH_CLK_FSIDIV() */ + map->phys = (phys_addr_t)clks[i].enable_reg; + map->len = 8; + + clks[i].enable_reg = 0; /* remove .enable_reg */ + clks[i].ops = &fsidiv_clk_ops; + clks[i].mapping = map; + + clk_register(&clks[i]); + } + + return 0; +} diff --git a/include/linux/sh_clk.h b/include/linux/sh_clk.h index 5091091..60c7239 100644 --- a/include/linux/sh_clk.h +++ b/include/linux/sh_clk.h @@ -199,4 +199,13 @@ int sh_clk_div6_reparent_register(struct clk *clks, int nr); #define CLKDEV_DEV_ID(_id, _clk) { .dev_id = _id, .clk = _clk } #define CLKDEV_ICK_ID(_cid, _did, _clk) { .con_id = _cid, .dev_id = _did, .clk = _clk } +/* .enable_reg will be updated to .mapping on sh_clk_fsidiv_register() */ +#define SH_CLK_FSIDIV(_reg, _parent) \ +{ \ + .enable_reg = (void __iomem *)_reg, \ + .parent = _parent, \ +} + +int sh_clk_fsidiv_register(struct clk *clks, int nr); + #endif /* __SH_CLOCK_H */ -- cgit v0.10.2 From 9ee8008e99b36fff6a06c41a76594dd1b9a0677a Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Tue, 30 Oct 2012 20:07:25 -0700 Subject: ARM: shmobile: sh7372: sh7372_fsidivX_clk become non-global Not only sh7372 but also many Renesas chip has FSI-DIV clock, and we can share its sh_clk_ops. To support common FSI-DIV clock, sh7372_fsidivX_clk becomes non-global by this patch. This is preparation for FSI DT support. Signed-off-by: Kuninori Morimoto Signed-off-by: Simon Horman diff --git a/arch/arm/mach-shmobile/board-ap4evb.c b/arch/arm/mach-shmobile/board-ap4evb.c index 790dc68..cefdd03 100644 --- a/arch/arm/mach-shmobile/board-ap4evb.c +++ b/arch/arm/mach-shmobile/board-ap4evb.c @@ -728,7 +728,7 @@ fsia_ick_out: static int fsi_hdmi_set_rate(struct device *dev, int rate, int enable) { struct clk *fsib_clk; - struct clk *fdiv_clk = &sh7372_fsidivb_clk; + struct clk *fdiv_clk = clk_get(NULL, "fsidivb"); long fsib_rate = 0; long fdiv_rate = 0; int ackmd_bpfmd; diff --git a/arch/arm/mach-shmobile/board-mackerel.c b/arch/arm/mach-shmobile/board-mackerel.c index 0c27c81..c826d77 100644 --- a/arch/arm/mach-shmobile/board-mackerel.c +++ b/arch/arm/mach-shmobile/board-mackerel.c @@ -882,7 +882,7 @@ static int __fsi_set_round_rate(struct clk *clk, long rate, int enable) static int fsi_b_set_rate(struct device *dev, int rate, int enable) { struct clk *fsib_clk; - struct clk *fdiv_clk = &sh7372_fsidivb_clk; + struct clk *fdiv_clk = clk_get(NULL, "fsidivb"); long fsib_rate = 0; long fdiv_rate = 0; int ackmd_bpfmd; diff --git a/arch/arm/mach-shmobile/clock-sh7372.c b/arch/arm/mach-shmobile/clock-sh7372.c index 430a90f..18dcff7 100644 --- a/arch/arm/mach-shmobile/clock-sh7372.c +++ b/arch/arm/mach-shmobile/clock-sh7372.c @@ -481,7 +481,7 @@ static struct clk_mapping fsidiva_clk_mapping = { .len = 8, }; -struct clk sh7372_fsidiva_clk = { +static struct clk fsidiva_clk = { .ops = &fsidiv_clk_ops, .parent = &div6_reparent_clks[DIV6_FSIA], /* late install */ .mapping = &fsidiva_clk_mapping, @@ -492,15 +492,15 @@ static struct clk_mapping fsidivb_clk_mapping = { .len = 8, }; -struct clk sh7372_fsidivb_clk = { +static struct clk fsidivb_clk = { .ops = &fsidiv_clk_ops, .parent = &div6_reparent_clks[DIV6_FSIB], /* late install */ .mapping = &fsidivb_clk_mapping, }; static struct clk *late_main_clks[] = { - &sh7372_fsidiva_clk, - &sh7372_fsidivb_clk, + &fsidiva_clk, + &fsidivb_clk, }; enum { MSTP001, MSTP000, @@ -583,6 +583,8 @@ static struct clk_lookup lookups[] = { CLKDEV_CON_ID("pllc1_clk", &pllc1_clk), CLKDEV_CON_ID("pllc1_div2_clk", &pllc1_div2_clk), CLKDEV_CON_ID("pllc2_clk", &sh7372_pllc2_clk), + CLKDEV_CON_ID("fsidiva", &fsidiva_clk), + CLKDEV_CON_ID("fsidivb", &fsidivb_clk), /* DIV4 clocks */ CLKDEV_CON_ID("i_clk", &div4_clks[DIV4_I]), diff --git a/arch/arm/mach-shmobile/include/mach/sh7372.h b/arch/arm/mach-shmobile/include/mach/sh7372.h index d65fbbe..26cd101 100644 --- a/arch/arm/mach-shmobile/include/mach/sh7372.h +++ b/arch/arm/mach-shmobile/include/mach/sh7372.h @@ -479,8 +479,6 @@ extern struct clk sh7372_dv_clki_div2_clk; extern struct clk sh7372_pllc2_clk; extern struct clk sh7372_fsiack_clk; extern struct clk sh7372_fsibck_clk; -extern struct clk sh7372_fsidiva_clk; -extern struct clk sh7372_fsidivb_clk; extern void sh7372_intcs_suspend(void); extern void sh7372_intcs_resume(void); -- cgit v0.10.2 From dc3cad8222ca0fc67d3f7e867e8e39a64c28bedf Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Tue, 30 Oct 2012 20:07:59 -0700 Subject: ARM: shmobile: sh7372: use sh_clk_fsidiv_register() for FSI-DIV clocks Now, sh7372 can use sh_clk_fsidiv_register() for FSI-DIV clocks. Signed-off-by: Kuninori Morimoto Signed-off-by: Simon Horman diff --git a/arch/arm/mach-shmobile/clock-sh7372.c b/arch/arm/mach-shmobile/clock-sh7372.c index 18dcff7..bee2d05 100644 --- a/arch/arm/mach-shmobile/clock-sh7372.c +++ b/arch/arm/mach-shmobile/clock-sh7372.c @@ -420,87 +420,11 @@ static struct clk div6_reparent_clks[DIV6_REPARENT_NR] = { }; /* FSI DIV */ -static unsigned long fsidiv_recalc(struct clk *clk) -{ - unsigned long value; - - value = __raw_readl(clk->mapping->base); - - value >>= 16; - if (value < 2) - return 0; - - return clk->parent->rate / value; -} - -static long fsidiv_round_rate(struct clk *clk, unsigned long rate) -{ - return clk_rate_div_range_round(clk, 2, 0xffff, rate); -} - -static void fsidiv_disable(struct clk *clk) -{ - __raw_writel(0, clk->mapping->base); -} - -static int fsidiv_enable(struct clk *clk) -{ - unsigned long value; - - value = __raw_readl(clk->mapping->base) >> 16; - if (value < 2) - return -EIO; - - __raw_writel((value << 16) | 0x3, clk->mapping->base); - - return 0; -} +enum { FSIDIV_A, FSIDIV_B, FSIDIV_REPARENT_NR }; -static int fsidiv_set_rate(struct clk *clk, unsigned long rate) -{ - int idx; - - idx = (clk->parent->rate / rate) & 0xffff; - if (idx < 2) - return -EINVAL; - - __raw_writel(idx << 16, clk->mapping->base); - return 0; -} - -static struct sh_clk_ops fsidiv_clk_ops = { - .recalc = fsidiv_recalc, - .round_rate = fsidiv_round_rate, - .set_rate = fsidiv_set_rate, - .enable = fsidiv_enable, - .disable = fsidiv_disable, -}; - -static struct clk_mapping fsidiva_clk_mapping = { - .phys = FSIDIVA, - .len = 8, -}; - -static struct clk fsidiva_clk = { - .ops = &fsidiv_clk_ops, - .parent = &div6_reparent_clks[DIV6_FSIA], /* late install */ - .mapping = &fsidiva_clk_mapping, -}; - -static struct clk_mapping fsidivb_clk_mapping = { - .phys = FSIDIVB, - .len = 8, -}; - -static struct clk fsidivb_clk = { - .ops = &fsidiv_clk_ops, - .parent = &div6_reparent_clks[DIV6_FSIB], /* late install */ - .mapping = &fsidivb_clk_mapping, -}; - -static struct clk *late_main_clks[] = { - &fsidiva_clk, - &fsidivb_clk, +static struct clk fsidivs[] = { + [FSIDIV_A] = SH_CLK_FSIDIV(FSIDIVA, &div6_reparent_clks[DIV6_FSIA]), + [FSIDIV_B] = SH_CLK_FSIDIV(FSIDIVB, &div6_reparent_clks[DIV6_FSIB]), }; enum { MSTP001, MSTP000, @@ -583,8 +507,8 @@ static struct clk_lookup lookups[] = { CLKDEV_CON_ID("pllc1_clk", &pllc1_clk), CLKDEV_CON_ID("pllc1_div2_clk", &pllc1_div2_clk), CLKDEV_CON_ID("pllc2_clk", &sh7372_pllc2_clk), - CLKDEV_CON_ID("fsidiva", &fsidiva_clk), - CLKDEV_CON_ID("fsidivb", &fsidivb_clk), + CLKDEV_CON_ID("fsidiva", &fsidivs[FSIDIV_A]), + CLKDEV_CON_ID("fsidivb", &fsidivs[FSIDIV_B]), /* DIV4 clocks */ CLKDEV_CON_ID("i_clk", &div4_clks[DIV4_I]), @@ -680,6 +604,8 @@ static struct clk_lookup lookups[] = { CLKDEV_ICK_ID("icka", "sh_fsi2", &div6_reparent_clks[DIV6_FSIA]), CLKDEV_ICK_ID("ickb", "sh_fsi2", &div6_reparent_clks[DIV6_FSIB]), CLKDEV_ICK_ID("spu2", "sh_fsi2", &mstp_clks[MSTP223]), + CLKDEV_ICK_ID("diva", "sh_fsi2", &fsidivs[FSIDIV_A]), + CLKDEV_ICK_ID("divb", "sh_fsi2", &fsidivs[FSIDIV_B]), }; void __init sh7372_clock_init(void) @@ -708,8 +634,8 @@ void __init sh7372_clock_init(void) if (!ret) ret = sh_clk_mstp_register(mstp_clks, MSTP_NR); - for (k = 0; !ret && (k < ARRAY_SIZE(late_main_clks)); k++) - ret = clk_register(late_main_clks[k]); + if (!ret) + ret = sh_clk_fsidiv_register(fsidivs, FSIDIV_REPARENT_NR); clkdev_add_table(lookups, ARRAY_SIZE(lookups)); -- cgit v0.10.2 From 7c4fd734bfb722433d2782208e610b31e751f94e Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Tue, 30 Oct 2012 22:57:25 -0700 Subject: ARM: shmobile: r8a7740: add FSI-DVI clocks Signed-off-by: Kuninori Morimoto Signed-off-by: Simon Horman diff --git a/arch/arm/mach-shmobile/clock-r8a7740.c b/arch/arm/mach-shmobile/clock-r8a7740.c index c012bbf..eb5dfee 100644 --- a/arch/arm/mach-shmobile/clock-r8a7740.c +++ b/arch/arm/mach-shmobile/clock-r8a7740.c @@ -65,6 +65,9 @@ #define SMSTPCR3 IOMEM(0xe615013c) #define SMSTPCR4 IOMEM(0xe6150140) +#define FSIDIVA IOMEM(0xFE1F8000) +#define FSIDIVB IOMEM(0xFE1F8008) + /* Fixed 32 KHz root clock from EXTALR pin */ static struct clk extalr_clk = { .rate = 32768, @@ -443,6 +446,14 @@ static struct clk *late_main_clks[] = { &hdmi2_clk, }; +/* FSI DIV */ +enum { FSIDIV_A, FSIDIV_B, FSIDIV_REPARENT_NR }; + +static struct clk fsidivs[] = { + [FSIDIV_A] = SH_CLK_FSIDIV(FSIDIVA, &div6_reparent_clks[DIV6_FSIA]), + [FSIDIV_B] = SH_CLK_FSIDIV(FSIDIVB, &div6_reparent_clks[DIV6_FSIB]), +}; + /* MSTP */ enum { DIV4_I, DIV4_ZG, DIV4_B, DIV4_M1, DIV4_HP, @@ -612,6 +623,8 @@ static struct clk_lookup lookups[] = { CLKDEV_ICK_ID("icka", "sh_fsi2", &div6_reparent_clks[DIV6_FSIA]), CLKDEV_ICK_ID("ickb", "sh_fsi2", &div6_reparent_clks[DIV6_FSIB]), + CLKDEV_ICK_ID("diva", "sh_fsi2", &fsidivs[FSIDIV_A]), + CLKDEV_ICK_ID("divb", "sh_fsi2", &fsidivs[FSIDIV_B]), }; void __init r8a7740_clock_init(u8 md_ck) @@ -657,6 +670,9 @@ void __init r8a7740_clock_init(u8 md_ck) for (k = 0; !ret && (k < ARRAY_SIZE(late_main_clks)); k++) ret = clk_register(late_main_clks[k]); + if (!ret) + ret = sh_clk_fsidiv_register(fsidivs, FSIDIV_REPARENT_NR); + clkdev_add_table(lookups, ARRAY_SIZE(lookups)); if (!ret) -- cgit v0.10.2 From 8b0eadd247f5346acbda8d5a656dc8aec526d259 Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Wed, 7 Nov 2012 19:08:16 -0800 Subject: ARM: shmobile: add fsi external clock on r8a7740 xcka/xckb were required from FSI driver Signed-off-by: Kuninori Morimoto Signed-off-by: Simon Horman diff --git a/arch/arm/mach-shmobile/clock-r8a7740.c b/arch/arm/mach-shmobile/clock-r8a7740.c index eb5dfee..eac49d5 100644 --- a/arch/arm/mach-shmobile/clock-r8a7740.c +++ b/arch/arm/mach-shmobile/clock-r8a7740.c @@ -625,6 +625,8 @@ static struct clk_lookup lookups[] = { CLKDEV_ICK_ID("ickb", "sh_fsi2", &div6_reparent_clks[DIV6_FSIB]), CLKDEV_ICK_ID("diva", "sh_fsi2", &fsidivs[FSIDIV_A]), CLKDEV_ICK_ID("divb", "sh_fsi2", &fsidivs[FSIDIV_B]), + CLKDEV_ICK_ID("xcka", "sh_fsi2", &fsiack_clk), + CLKDEV_ICK_ID("xckb", "sh_fsi2", &fsibck_clk), }; void __init r8a7740_clock_init(u8 md_ck) -- cgit v0.10.2 From 2944628607f76e4755660cd710f22a4748ef88d8 Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Wed, 7 Nov 2012 19:08:50 -0800 Subject: ARM: shmobile: add fsi external clock sh7372 xcka/xckb were required from FSI driver Signed-off-by: Kuninori Morimoto Signed-off-by: Simon Horman diff --git a/arch/arm/mach-shmobile/clock-sh7372.c b/arch/arm/mach-shmobile/clock-sh7372.c index bee2d05..4d57e34 100644 --- a/arch/arm/mach-shmobile/clock-sh7372.c +++ b/arch/arm/mach-shmobile/clock-sh7372.c @@ -606,6 +606,8 @@ static struct clk_lookup lookups[] = { CLKDEV_ICK_ID("spu2", "sh_fsi2", &mstp_clks[MSTP223]), CLKDEV_ICK_ID("diva", "sh_fsi2", &fsidivs[FSIDIV_A]), CLKDEV_ICK_ID("divb", "sh_fsi2", &fsidivs[FSIDIV_B]), + CLKDEV_ICK_ID("xcka", "sh_fsi2", &sh7372_fsiack_clk), + CLKDEV_ICK_ID("xckb", "sh_fsi2", &sh7372_fsibck_clk), }; void __init sh7372_clock_init(void) -- cgit v0.10.2 From ca3d241cb2974852192bdeb896bf5e2c46463286 Mon Sep 17 00:00:00 2001 From: Joseph Lo Date: Fri, 9 Nov 2012 14:40:41 -0700 Subject: ARM: tegra: enable data prefetch on L2 Enable the data prefetch on L2. The bit28 in aux ctrl register. Signed-off-by: Joseph Lo Signed-off-by: Stephen Warren Acked-by: Peter De Schrijver diff --git a/arch/arm/mach-tegra/common.c b/arch/arm/mach-tegra/common.c index 6c04a18..89d3ebc 100644 --- a/arch/arm/mach-tegra/common.c +++ b/arch/arm/mach-tegra/common.c @@ -121,7 +121,7 @@ static void __init tegra_init_cache(void) cache_type = readl(p + L2X0_CACHE_TYPE); aux_ctrl = (cache_type & 0x700) << (17-8); - aux_ctrl |= 0x6C000001; + aux_ctrl |= 0x7C000001; l2x0_of_init(aux_ctrl, 0x8200c3fe); #endif -- cgit v0.10.2 From 84cee34db4d34b9059f4ef66f7d1805e438cc7f3 Mon Sep 17 00:00:00 2001 From: Alban Bedel Date: Mon, 12 Nov 2012 11:27:40 +0100 Subject: ARM: LPC32xx: Add the motor PWM clock diff --git a/arch/arm/mach-lpc32xx/clock.c b/arch/arm/mach-lpc32xx/clock.c index f48c2e9..dd5d6f5 100644 --- a/arch/arm/mach-lpc32xx/clock.c +++ b/arch/arm/mach-lpc32xx/clock.c @@ -585,6 +585,13 @@ static struct clk clk_timer3 = { .enable_mask = LPC32XX_CLKPWR_TMRPWMCLK_TIMER3_EN, .get_rate = local_return_parent_rate, }; +static struct clk clk_mpwm = { + .parent = &clk_pclk, + .enable = local_onoff_enable, + .enable_reg = LPC32XX_CLKPWR_TIMERS_PWMS_CLK_CTRL_1, + .enable_mask = LPC32XX_CLKPWR_TMRPWMCLK_MPWM_EN, + .get_rate = local_return_parent_rate, +}; static struct clk clk_wdt = { .parent = &clk_pclk, .enable = local_onoff_enable, @@ -1202,6 +1209,7 @@ static struct clk_lookup lookups[] = { CLKDEV_INIT("pl08xdmac", NULL, &clk_dma), CLKDEV_INIT("4003c000.watchdog", NULL, &clk_wdt), CLKDEV_INIT("4005c000.pwm", NULL, &clk_pwm), + CLKDEV_INIT("400e8000.mpwm", NULL, &clk_mpwm), CLKDEV_INIT(NULL, "uart3_ck", &clk_uart3), CLKDEV_INIT(NULL, "uart4_ck", &clk_uart4), CLKDEV_INIT(NULL, "uart5_ck", &clk_uart5), diff --git a/arch/arm/mach-lpc32xx/include/mach/platform.h b/arch/arm/mach-lpc32xx/include/mach/platform.h index acc4aab..b5612a1 100644 --- a/arch/arm/mach-lpc32xx/include/mach/platform.h +++ b/arch/arm/mach-lpc32xx/include/mach/platform.h @@ -515,6 +515,7 @@ /* * clkpwr_timers_pwms_clk_ctrl_1 register definitions */ +#define LPC32XX_CLKPWR_TMRPWMCLK_MPWM_EN 0x40 #define LPC32XX_CLKPWR_TMRPWMCLK_TIMER3_EN 0x20 #define LPC32XX_CLKPWR_TMRPWMCLK_TIMER2_EN 0x10 #define LPC32XX_CLKPWR_TMRPWMCLK_TIMER1_EN 0x08 -- cgit v0.10.2 From e245f54a06f6aeb025b50eb02c2969fb4e254b46 Mon Sep 17 00:00:00 2001 From: Laxman Dewangan Date: Tue, 13 Nov 2012 10:33:40 +0530 Subject: ARM: tegra: Add OF_DEV_AUXDATA for sflash driver in board dt Add OF_DEV_AUXDATA for sflash controller driver for Tegra20 board dt files. Set the parent clock of sflash controller to PLLP and configure clock to 20MHz. Signed-off-by: Laxman Dewangan Signed-off-by: Stephen Warren diff --git a/arch/arm/mach-tegra/board-dt-tegra20.c b/arch/arm/mach-tegra/board-dt-tegra20.c index 22f5a9b..1198e84 100644 --- a/arch/arm/mach-tegra/board-dt-tegra20.c +++ b/arch/arm/mach-tegra/board-dt-tegra20.c @@ -89,6 +89,7 @@ struct of_dev_auxdata tegra20_auxdata_lookup[] __initdata = { &tegra_ehci3_pdata), OF_DEV_AUXDATA("nvidia,tegra20-apbdma", TEGRA_APB_DMA_BASE, "tegra-apbdma", NULL), OF_DEV_AUXDATA("nvidia,tegra20-pwm", TEGRA_PWFM_BASE, "tegra-pwm", NULL), + OF_DEV_AUXDATA("nvidia,tegra20-sflash", 0x7000c380, "spi", NULL), OF_DEV_AUXDATA("nvidia,tegra20-slink", 0x7000D400, "spi_tegra.0", NULL), OF_DEV_AUXDATA("nvidia,tegra20-slink", 0x7000D600, "spi_tegra.1", NULL), OF_DEV_AUXDATA("nvidia,tegra20-slink", 0x7000D800, "spi_tegra.2", NULL), @@ -112,6 +113,7 @@ static __initdata struct tegra_clk_init_table tegra_dt_clk_init_table[] = { { "sdmmc1", "pll_p", 48000000, false}, { "sdmmc3", "pll_p", 48000000, false}, { "sdmmc4", "pll_p", 48000000, false}, + { "spi", "pll_p", 20000000, false }, { "sbc1", "pll_p", 100000000, false }, { "sbc2", "pll_p", 100000000, false }, { "sbc3", "pll_p", 100000000, false }, -- cgit v0.10.2 From fd072a86bde1c5f7cf04618903c5ce8658011c1c Mon Sep 17 00:00:00 2001 From: Peter De Schrijver Date: Wed, 14 Nov 2012 16:27:23 +0200 Subject: ARM: tegra: Implement 6395/1 for Tegra This patch implements ARM linux patch 6395/1 for Tegra. See commit 1a8e41c "ARM: 6395/1: VExpress: Set bit 22 in the PL310 (cache controller) AuxCtlr register" for details. Signed-off-by: Peter De Schrijver [swarren: added commit subject for referenced patch] Signed-off-by: Stephen Warren diff --git a/arch/arm/mach-tegra/common.c b/arch/arm/mach-tegra/common.c index 89d3ebc..3e03e5f 100644 --- a/arch/arm/mach-tegra/common.c +++ b/arch/arm/mach-tegra/common.c @@ -121,7 +121,7 @@ static void __init tegra_init_cache(void) cache_type = readl(p + L2X0_CACHE_TYPE); aux_ctrl = (cache_type & 0x700) << (17-8); - aux_ctrl |= 0x7C000001; + aux_ctrl |= 0x7C400001; l2x0_of_init(aux_ctrl, 0x8200c3fe); #endif -- cgit v0.10.2 From 1f851a262baf7cbd4096d4d279c73cb697021773 Mon Sep 17 00:00:00 2001 From: Danny Huang Date: Thu, 15 Nov 2012 15:42:32 +0800 Subject: ARM: tegra: flexible spare fuse read function Change the spare fuse base from a definition to a variable. It provides flexibilty to read spare fuse on different chip. Signed-off-by: Danny Huang Signed-off-by: Stephen Warren diff --git a/arch/arm/mach-tegra/fuse.c b/arch/arm/mach-tegra/fuse.c index 6c752e8..bd19c2f 100644 --- a/arch/arm/mach-tegra/fuse.c +++ b/arch/arm/mach-tegra/fuse.c @@ -28,7 +28,8 @@ #define FUSE_UID_LOW 0x108 #define FUSE_UID_HIGH 0x10c #define FUSE_SKU_INFO 0x110 -#define FUSE_SPARE_BIT 0x200 + +#define TEGRA20_FUSE_SPARE_BIT 0x200 int tegra_sku_id; int tegra_cpu_process_id; @@ -36,6 +37,8 @@ int tegra_core_process_id; int tegra_chip_id; enum tegra_revision tegra_revision; +static int tegra_fuse_spare_bit; + /* The BCT to use at boot is specified by board straps that can be read * through a APB misc register and decoded. 2 bits, i.e. 4 possible BCTs. */ @@ -56,14 +59,14 @@ static const char *tegra_revision_name[TEGRA_REVISION_MAX] = { [TEGRA_REVISION_A04] = "A04", }; -static inline u32 tegra_fuse_readl(unsigned long offset) +u32 tegra_fuse_readl(unsigned long offset) { return tegra_apb_readl(TEGRA_FUSE_BASE + offset); } -static inline bool get_spare_fuse(int bit) +bool tegra_spare_fuse(int bit) { - return tegra_fuse_readl(FUSE_SPARE_BIT + bit * 4); + return tegra_fuse_readl(tegra_fuse_spare_bit + bit * 4); } static enum tegra_revision tegra_get_revision(u32 id) @@ -77,7 +80,7 @@ static enum tegra_revision tegra_get_revision(u32 id) return TEGRA_REVISION_A02; case 3: if (tegra_chip_id == TEGRA20 && - (get_spare_fuse(18) || get_spare_fuse(19))) + (tegra_spare_fuse(18) || tegra_spare_fuse(19))) return TEGRA_REVISION_A03p; else return TEGRA_REVISION_A03; @@ -99,10 +102,12 @@ void tegra_init_fuse(void) reg = tegra_fuse_readl(FUSE_SKU_INFO); tegra_sku_id = reg & 0xFF; - reg = tegra_fuse_readl(FUSE_SPARE_BIT); + tegra_fuse_spare_bit = TEGRA20_FUSE_SPARE_BIT; + + reg = tegra_fuse_readl(tegra_fuse_spare_bit); tegra_cpu_process_id = (reg >> 6) & 3; - reg = tegra_fuse_readl(FUSE_SPARE_BIT); + reg = tegra_fuse_readl(tegra_fuse_spare_bit); tegra_core_process_id = (reg >> 12) & 3; reg = tegra_apb_readl(TEGRA_APB_MISC_BASE + STRAP_OPT); diff --git a/arch/arm/mach-tegra/fuse.h b/arch/arm/mach-tegra/fuse.h index d2107b2..aef1223 100644 --- a/arch/arm/mach-tegra/fuse.h +++ b/arch/arm/mach-tegra/fuse.h @@ -48,5 +48,7 @@ extern int tegra_bct_strapping; unsigned long long tegra_chip_uid(void); void tegra_init_fuse(void); +bool tegra_spare_fuse(int bit); +u32 tegra_fuse_readl(unsigned long offset); #endif -- cgit v0.10.2 From 25cd5a391478b1e29ef7de172b3bd612159a07cc Mon Sep 17 00:00:00 2001 From: Danny Huang Date: Thu, 15 Nov 2012 15:42:33 +0800 Subject: ARM: tegra: Add speedo-based process identification Detect CPU and core process ID by checking speedo corner tables. This can provide a more accurate process ID. Signed-off-by: Danny Huang [swarren s/Tegra2/Tegra20/ in log print] Signed-off-by: Stephen Warren diff --git a/arch/arm/mach-tegra/Makefile b/arch/arm/mach-tegra/Makefile index 9aa653b..07ed4bd 100644 --- a/arch/arm/mach-tegra/Makefile +++ b/arch/arm/mach-tegra/Makefile @@ -12,6 +12,7 @@ obj-$(CONFIG_CPU_IDLE) += cpuidle.o obj-$(CONFIG_CPU_IDLE) += sleep.o obj-$(CONFIG_ARCH_TEGRA_2x_SOC) += tegra20_clocks.o obj-$(CONFIG_ARCH_TEGRA_2x_SOC) += tegra20_clocks_data.o +obj-$(CONFIG_ARCH_TEGRA_2x_SOC) += tegra20_speedo.o obj-$(CONFIG_ARCH_TEGRA_2x_SOC) += tegra2_emc.o obj-$(CONFIG_ARCH_TEGRA_2x_SOC) += sleep-t20.o obj-$(CONFIG_ARCH_TEGRA_3x_SOC) += tegra30_clocks.o diff --git a/arch/arm/mach-tegra/fuse.c b/arch/arm/mach-tegra/fuse.c index bd19c2f..9fd02c5 100644 --- a/arch/arm/mach-tegra/fuse.c +++ b/arch/arm/mach-tegra/fuse.c @@ -35,9 +35,11 @@ int tegra_sku_id; int tegra_cpu_process_id; int tegra_core_process_id; int tegra_chip_id; +int tegra_soc_speedo_id; enum tegra_revision tegra_revision; static int tegra_fuse_spare_bit; +static void (*tegra_init_speedo_data)(void); /* The BCT to use at boot is specified by board straps that can be read * through a APB misc register and decoded. 2 bits, i.e. 4 possible BCTs. @@ -91,6 +93,16 @@ static enum tegra_revision tegra_get_revision(u32 id) } } +static void tegra_get_process_id(void) +{ + u32 reg; + + reg = tegra_fuse_readl(tegra_fuse_spare_bit); + tegra_cpu_process_id = (reg >> 6) & 3; + reg = tegra_fuse_readl(tegra_fuse_spare_bit); + tegra_core_process_id = (reg >> 12) & 3; +} + void tegra_init_fuse(void) { u32 id; @@ -102,21 +114,24 @@ void tegra_init_fuse(void) reg = tegra_fuse_readl(FUSE_SKU_INFO); tegra_sku_id = reg & 0xFF; - tegra_fuse_spare_bit = TEGRA20_FUSE_SPARE_BIT; - - reg = tegra_fuse_readl(tegra_fuse_spare_bit); - tegra_cpu_process_id = (reg >> 6) & 3; - - reg = tegra_fuse_readl(tegra_fuse_spare_bit); - tegra_core_process_id = (reg >> 12) & 3; - reg = tegra_apb_readl(TEGRA_APB_MISC_BASE + STRAP_OPT); tegra_bct_strapping = (reg & RAM_ID_MASK) >> RAM_CODE_SHIFT; id = readl_relaxed(IO_ADDRESS(TEGRA_APB_MISC_BASE) + 0x804); tegra_chip_id = (id >> 8) & 0xff; + tegra_fuse_spare_bit = TEGRA20_FUSE_SPARE_BIT; + + switch (tegra_chip_id) { + case TEGRA20: + tegra_init_speedo_data = &tegra20_init_speedo_data; + break; + default: + tegra_init_speedo_data = &tegra_get_process_id; + } + tegra_revision = tegra_get_revision(id); + tegra_init_speedo_data(); pr_info("Tegra Revision: %s SKU: %d CPU Process: %d Core Process: %d\n", tegra_revision_name[tegra_revision], diff --git a/arch/arm/mach-tegra/fuse.h b/arch/arm/mach-tegra/fuse.h index aef1223..7347c88 100644 --- a/arch/arm/mach-tegra/fuse.h +++ b/arch/arm/mach-tegra/fuse.h @@ -42,6 +42,7 @@ extern int tegra_sku_id; extern int tegra_cpu_process_id; extern int tegra_core_process_id; extern int tegra_chip_id; +extern int tegra_soc_speedo_id; extern enum tegra_revision tegra_revision; extern int tegra_bct_strapping; @@ -51,4 +52,10 @@ void tegra_init_fuse(void); bool tegra_spare_fuse(int bit); u32 tegra_fuse_readl(unsigned long offset); +#ifdef CONFIG_ARCH_TEGRA_2x_SOC +void tegra20_init_speedo_data(void); +#else +static inline void tegra20_init_speedo_data(void) {} +#endif + #endif diff --git a/arch/arm/mach-tegra/tegra20_speedo.c b/arch/arm/mach-tegra/tegra20_speedo.c new file mode 100644 index 0000000..fa6eb57 --- /dev/null +++ b/arch/arm/mach-tegra/tegra20_speedo.c @@ -0,0 +1,109 @@ +/* + * Copyright (c) 2012, NVIDIA CORPORATION. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include +#include + +#include "fuse.h" + +#define CPU_SPEEDO_LSBIT 20 +#define CPU_SPEEDO_MSBIT 29 +#define CPU_SPEEDO_REDUND_LSBIT 30 +#define CPU_SPEEDO_REDUND_MSBIT 39 +#define CPU_SPEEDO_REDUND_OFFS (CPU_SPEEDO_REDUND_MSBIT - CPU_SPEEDO_MSBIT) + +#define CORE_SPEEDO_LSBIT 40 +#define CORE_SPEEDO_MSBIT 47 +#define CORE_SPEEDO_REDUND_LSBIT 48 +#define CORE_SPEEDO_REDUND_MSBIT 55 +#define CORE_SPEEDO_REDUND_OFFS (CORE_SPEEDO_REDUND_MSBIT - CORE_SPEEDO_MSBIT) + +#define SPEEDO_MULT 4 + +#define PROCESS_CORNERS_NUM 4 + +#define SPEEDO_ID_SELECT_0(rev) ((rev) <= 2) +#define SPEEDO_ID_SELECT_1(sku) \ + (((sku) != 20) && ((sku) != 23) && ((sku) != 24) && \ + ((sku) != 27) && ((sku) != 28)) + +enum { + SPEEDO_ID_0, + SPEEDO_ID_1, + SPEEDO_ID_2, + SPEEDO_ID_COUNT, +}; + +static const u32 cpu_process_speedos[][PROCESS_CORNERS_NUM] = { + {315, 366, 420, UINT_MAX}, + {303, 368, 419, UINT_MAX}, + {316, 331, 383, UINT_MAX}, +}; + +static const u32 core_process_speedos[][PROCESS_CORNERS_NUM] = { + {165, 195, 224, UINT_MAX}, + {165, 195, 224, UINT_MAX}, + {165, 195, 224, UINT_MAX}, +}; + +void tegra20_init_speedo_data(void) +{ + u32 reg; + u32 val; + int i; + + BUILD_BUG_ON(ARRAY_SIZE(cpu_process_speedos) != SPEEDO_ID_COUNT); + BUILD_BUG_ON(ARRAY_SIZE(core_process_speedos) != SPEEDO_ID_COUNT); + + if (SPEEDO_ID_SELECT_0(tegra_revision)) + tegra_soc_speedo_id = SPEEDO_ID_0; + else if (SPEEDO_ID_SELECT_1(tegra_sku_id)) + tegra_soc_speedo_id = SPEEDO_ID_1; + else + tegra_soc_speedo_id = SPEEDO_ID_2; + + val = 0; + for (i = CPU_SPEEDO_MSBIT; i >= CPU_SPEEDO_LSBIT; i--) { + reg = tegra_spare_fuse(i) | + tegra_spare_fuse(i + CPU_SPEEDO_REDUND_OFFS); + val = (val << 1) | (reg & 0x1); + } + val = val * SPEEDO_MULT; + pr_debug("%s CPU speedo value %u\n", __func__, val); + + for (i = 0; i < (PROCESS_CORNERS_NUM - 1); i++) { + if (val <= cpu_process_speedos[tegra_soc_speedo_id][i]) + break; + } + tegra_cpu_process_id = i; + + val = 0; + for (i = CORE_SPEEDO_MSBIT; i >= CORE_SPEEDO_LSBIT; i--) { + reg = tegra_spare_fuse(i) | + tegra_spare_fuse(i + CORE_SPEEDO_REDUND_OFFS); + val = (val << 1) | (reg & 0x1); + } + val = val * SPEEDO_MULT; + pr_debug("%s Core speedo value %u\n", __func__, val); + + for (i = 0; i < (PROCESS_CORNERS_NUM - 1); i++) { + if (val <= core_process_speedos[tegra_soc_speedo_id][i]) + break; + } + tegra_core_process_id = i; + + pr_info("Tegra20 Soc Speedo ID %d", tegra_soc_speedo_id); +} -- cgit v0.10.2 From f8ddda713b9ea6c10012429c089c81bc9a5cd49f Mon Sep 17 00:00:00 2001 From: Danny Huang Date: Thu, 15 Nov 2012 15:42:34 +0800 Subject: ARM: tegra: Tegra30 speedo-based process identification This patch adds speedo-based process identification support for Tegra30. Signed-off-by: Danny Huang [swarren s/Tegra3/Tegra30/ in log print, s/T30/Tegra30/ in commit description] Signed-off-by: Stephen Warren diff --git a/arch/arm/mach-tegra/Makefile b/arch/arm/mach-tegra/Makefile index 07ed4bd..6cc23cc 100644 --- a/arch/arm/mach-tegra/Makefile +++ b/arch/arm/mach-tegra/Makefile @@ -17,6 +17,7 @@ obj-$(CONFIG_ARCH_TEGRA_2x_SOC) += tegra2_emc.o obj-$(CONFIG_ARCH_TEGRA_2x_SOC) += sleep-t20.o obj-$(CONFIG_ARCH_TEGRA_3x_SOC) += tegra30_clocks.o obj-$(CONFIG_ARCH_TEGRA_3x_SOC) += tegra30_clocks_data.o +obj-$(CONFIG_ARCH_TEGRA_3x_SOC) += tegra30_speedo.o obj-$(CONFIG_ARCH_TEGRA_3x_SOC) += sleep-t30.o obj-$(CONFIG_SMP) += platsmp.o headsmp.o obj-$(CONFIG_SMP) += reset.o diff --git a/arch/arm/mach-tegra/fuse.c b/arch/arm/mach-tegra/fuse.c index 9fd02c5..8121742 100644 --- a/arch/arm/mach-tegra/fuse.c +++ b/arch/arm/mach-tegra/fuse.c @@ -30,11 +30,13 @@ #define FUSE_SKU_INFO 0x110 #define TEGRA20_FUSE_SPARE_BIT 0x200 +#define TEGRA30_FUSE_SPARE_BIT 0x244 int tegra_sku_id; int tegra_cpu_process_id; int tegra_core_process_id; int tegra_chip_id; +int tegra_cpu_speedo_id; /* only exist in Tegra30 and later */ int tegra_soc_speedo_id; enum tegra_revision tegra_revision; @@ -120,13 +122,18 @@ void tegra_init_fuse(void) id = readl_relaxed(IO_ADDRESS(TEGRA_APB_MISC_BASE) + 0x804); tegra_chip_id = (id >> 8) & 0xff; - tegra_fuse_spare_bit = TEGRA20_FUSE_SPARE_BIT; - switch (tegra_chip_id) { case TEGRA20: + tegra_fuse_spare_bit = TEGRA20_FUSE_SPARE_BIT; tegra_init_speedo_data = &tegra20_init_speedo_data; break; + case TEGRA30: + tegra_fuse_spare_bit = TEGRA30_FUSE_SPARE_BIT; + tegra_init_speedo_data = &tegra30_init_speedo_data; + break; default: + pr_warn("Tegra: unknown chip id %d\n", tegra_chip_id); + tegra_fuse_spare_bit = TEGRA20_FUSE_SPARE_BIT; tegra_init_speedo_data = &tegra_get_process_id; } diff --git a/arch/arm/mach-tegra/fuse.h b/arch/arm/mach-tegra/fuse.h index 7347c88..ff1383d 100644 --- a/arch/arm/mach-tegra/fuse.h +++ b/arch/arm/mach-tegra/fuse.h @@ -42,6 +42,7 @@ extern int tegra_sku_id; extern int tegra_cpu_process_id; extern int tegra_core_process_id; extern int tegra_chip_id; +extern int tegra_cpu_speedo_id; /* only exist in Tegra30 and later */ extern int tegra_soc_speedo_id; extern enum tegra_revision tegra_revision; @@ -58,4 +59,10 @@ void tegra20_init_speedo_data(void); static inline void tegra20_init_speedo_data(void) {} #endif +#ifdef CONFIG_ARCH_TEGRA_3x_SOC +void tegra30_init_speedo_data(void); +#else +static inline void tegra30_init_speedo_data(void) {} +#endif + #endif diff --git a/arch/arm/mach-tegra/tegra30_speedo.c b/arch/arm/mach-tegra/tegra30_speedo.c new file mode 100644 index 0000000..125cb16 --- /dev/null +++ b/arch/arm/mach-tegra/tegra30_speedo.c @@ -0,0 +1,292 @@ +/* + * Copyright (c) 2012, NVIDIA CORPORATION. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include +#include + +#include "fuse.h" + +#define CORE_PROCESS_CORNERS_NUM 1 +#define CPU_PROCESS_CORNERS_NUM 6 + +#define FUSE_SPEEDO_CALIB_0 0x114 +#define FUSE_PACKAGE_INFO 0X1FC +#define FUSE_TEST_PROG_VER 0X128 + +#define G_SPEEDO_BIT_MINUS1 58 +#define G_SPEEDO_BIT_MINUS1_R 59 +#define G_SPEEDO_BIT_MINUS2 60 +#define G_SPEEDO_BIT_MINUS2_R 61 +#define LP_SPEEDO_BIT_MINUS1 62 +#define LP_SPEEDO_BIT_MINUS1_R 63 +#define LP_SPEEDO_BIT_MINUS2 64 +#define LP_SPEEDO_BIT_MINUS2_R 65 + +enum { + THRESHOLD_INDEX_0, + THRESHOLD_INDEX_1, + THRESHOLD_INDEX_2, + THRESHOLD_INDEX_3, + THRESHOLD_INDEX_4, + THRESHOLD_INDEX_5, + THRESHOLD_INDEX_6, + THRESHOLD_INDEX_7, + THRESHOLD_INDEX_8, + THRESHOLD_INDEX_9, + THRESHOLD_INDEX_10, + THRESHOLD_INDEX_11, + THRESHOLD_INDEX_COUNT, +}; + +static const u32 core_process_speedos[][CORE_PROCESS_CORNERS_NUM] = { + {180}, + {170}, + {195}, + {180}, + {168}, + {192}, + {180}, + {170}, + {195}, + {180}, + {180}, + {180}, +}; + +static const u32 cpu_process_speedos[][CPU_PROCESS_CORNERS_NUM] = { + {306, 338, 360, 376, UINT_MAX}, + {295, 336, 358, 375, UINT_MAX}, + {325, 325, 358, 375, UINT_MAX}, + {325, 325, 358, 375, UINT_MAX}, + {292, 324, 348, 364, UINT_MAX}, + {324, 324, 348, 364, UINT_MAX}, + {324, 324, 348, 364, UINT_MAX}, + {295, 336, 358, 375, UINT_MAX}, + {358, 358, 358, 358, 397, UINT_MAX}, + {364, 364, 364, 364, 397, UINT_MAX}, + {295, 336, 358, 375, 391, UINT_MAX}, + {295, 336, 358, 375, 391, UINT_MAX}, +}; + +static int threshold_index; +static int package_id; + +static void fuse_speedo_calib(u32 *speedo_g, u32 *speedo_lp) +{ + u32 reg; + int ate_ver; + int bit_minus1; + int bit_minus2; + + reg = tegra_fuse_readl(FUSE_SPEEDO_CALIB_0); + + *speedo_lp = (reg & 0xFFFF) * 4; + *speedo_g = ((reg >> 16) & 0xFFFF) * 4; + + ate_ver = tegra_fuse_readl(FUSE_TEST_PROG_VER); + pr_info("%s: ATE prog ver %d.%d\n", __func__, ate_ver/10, ate_ver%10); + + if (ate_ver >= 26) { + bit_minus1 = tegra_spare_fuse(LP_SPEEDO_BIT_MINUS1); + bit_minus1 |= tegra_spare_fuse(LP_SPEEDO_BIT_MINUS1_R); + bit_minus2 = tegra_spare_fuse(LP_SPEEDO_BIT_MINUS2); + bit_minus2 |= tegra_spare_fuse(LP_SPEEDO_BIT_MINUS2_R); + *speedo_lp |= (bit_minus1 << 1) | bit_minus2; + + bit_minus1 = tegra_spare_fuse(G_SPEEDO_BIT_MINUS1); + bit_minus1 |= tegra_spare_fuse(G_SPEEDO_BIT_MINUS1_R); + bit_minus2 = tegra_spare_fuse(G_SPEEDO_BIT_MINUS2); + bit_minus2 |= tegra_spare_fuse(G_SPEEDO_BIT_MINUS2_R); + *speedo_g |= (bit_minus1 << 1) | bit_minus2; + } else { + *speedo_lp |= 0x3; + *speedo_g |= 0x3; + } +} + +static void rev_sku_to_speedo_ids(int rev, int sku) +{ + switch (rev) { + case TEGRA_REVISION_A01: + tegra_cpu_speedo_id = 0; + tegra_soc_speedo_id = 0; + threshold_index = THRESHOLD_INDEX_0; + break; + case TEGRA_REVISION_A02: + case TEGRA_REVISION_A03: + switch (sku) { + case 0x87: + case 0x82: + tegra_cpu_speedo_id = 1; + tegra_soc_speedo_id = 1; + threshold_index = THRESHOLD_INDEX_1; + break; + case 0x81: + switch (package_id) { + case 1: + tegra_cpu_speedo_id = 2; + tegra_soc_speedo_id = 2; + threshold_index = THRESHOLD_INDEX_2; + break; + case 2: + tegra_cpu_speedo_id = 4; + tegra_soc_speedo_id = 1; + threshold_index = THRESHOLD_INDEX_7; + break; + default: + pr_err("Tegra30: Unknown pkg %d\n", package_id); + BUG(); + break; + } + break; + case 0x80: + switch (package_id) { + case 1: + tegra_cpu_speedo_id = 5; + tegra_soc_speedo_id = 2; + threshold_index = THRESHOLD_INDEX_8; + break; + case 2: + tegra_cpu_speedo_id = 6; + tegra_soc_speedo_id = 2; + threshold_index = THRESHOLD_INDEX_9; + break; + default: + pr_err("Tegra30: Unknown pkg %d\n", package_id); + BUG(); + break; + } + break; + case 0x83: + switch (package_id) { + case 1: + tegra_cpu_speedo_id = 7; + tegra_soc_speedo_id = 1; + threshold_index = THRESHOLD_INDEX_10; + break; + case 2: + tegra_cpu_speedo_id = 3; + tegra_soc_speedo_id = 2; + threshold_index = THRESHOLD_INDEX_3; + break; + default: + pr_err("Tegra30: Unknown pkg %d\n", package_id); + BUG(); + break; + } + break; + case 0x8F: + tegra_cpu_speedo_id = 8; + tegra_soc_speedo_id = 1; + threshold_index = THRESHOLD_INDEX_11; + break; + case 0x08: + tegra_cpu_speedo_id = 1; + tegra_soc_speedo_id = 1; + threshold_index = THRESHOLD_INDEX_4; + break; + case 0x02: + tegra_cpu_speedo_id = 2; + tegra_soc_speedo_id = 2; + threshold_index = THRESHOLD_INDEX_5; + break; + case 0x04: + tegra_cpu_speedo_id = 3; + tegra_soc_speedo_id = 2; + threshold_index = THRESHOLD_INDEX_6; + break; + case 0: + switch (package_id) { + case 1: + tegra_cpu_speedo_id = 2; + tegra_soc_speedo_id = 2; + threshold_index = THRESHOLD_INDEX_2; + break; + case 2: + tegra_cpu_speedo_id = 3; + tegra_soc_speedo_id = 2; + threshold_index = THRESHOLD_INDEX_3; + break; + default: + pr_err("Tegra30: Unknown pkg %d\n", package_id); + BUG(); + break; + } + break; + default: + pr_warn("Tegra30: Unknown SKU %d\n", sku); + tegra_cpu_speedo_id = 0; + tegra_soc_speedo_id = 0; + threshold_index = THRESHOLD_INDEX_0; + break; + } + break; + default: + pr_warn("Tegra30: Unknown chip rev %d\n", rev); + tegra_cpu_speedo_id = 0; + tegra_soc_speedo_id = 0; + threshold_index = THRESHOLD_INDEX_0; + break; + } +} + +void tegra30_init_speedo_data(void) +{ + u32 cpu_speedo_val; + u32 core_speedo_val; + int i; + + BUILD_BUG_ON(ARRAY_SIZE(cpu_process_speedos) != + THRESHOLD_INDEX_COUNT); + BUILD_BUG_ON(ARRAY_SIZE(core_process_speedos) != + THRESHOLD_INDEX_COUNT); + + package_id = tegra_fuse_readl(FUSE_PACKAGE_INFO) & 0x0F; + + rev_sku_to_speedo_ids(tegra_revision, tegra_sku_id); + fuse_speedo_calib(&cpu_speedo_val, &core_speedo_val); + pr_debug("%s CPU speedo value %u\n", __func__, cpu_speedo_val); + pr_debug("%s Core speedo value %u\n", __func__, core_speedo_val); + + for (i = 0; i < CPU_PROCESS_CORNERS_NUM; i++) { + if (cpu_speedo_val < cpu_process_speedos[threshold_index][i]) + break; + } + tegra_cpu_process_id = i - 1; + + if (tegra_cpu_process_id == -1) { + pr_warn("Tegra30: CPU speedo value %3d out of range", + cpu_speedo_val); + tegra_cpu_process_id = 0; + tegra_cpu_speedo_id = 1; + } + + for (i = 0; i < CORE_PROCESS_CORNERS_NUM; i++) { + if (core_speedo_val < core_process_speedos[threshold_index][i]) + break; + } + tegra_core_process_id = i - 1; + + if (tegra_core_process_id == -1) { + pr_warn("Tegra30: CORE speedo value %3d out of range", + core_speedo_val); + tegra_core_process_id = 0; + tegra_soc_speedo_id = 1; + } + + pr_info("Tegra30: CPU Speedo ID %d, Soc Speedo ID %d", + tegra_cpu_speedo_id, tegra_soc_speedo_id); +} -- cgit v0.10.2 From 35de7bfe91453fca9bb3154a36ddbb86711e08a0 Mon Sep 17 00:00:00 2001 From: Thierry Reding Date: Thu, 15 Nov 2012 22:07:55 +0100 Subject: ARM: tegra: Add AUXDATA for Tegra20 host1x Add the OF_DEV_AUXDATA table entries required to associate the proper names with host1x and its children. In turn, this allows the devices to find the required clocks. Signed-off-by: Thierry Reding Signed-off-by: Stephen Warren diff --git a/arch/arm/mach-tegra/board-dt-tegra20.c b/arch/arm/mach-tegra/board-dt-tegra20.c index 1198e84..734d9cc 100644 --- a/arch/arm/mach-tegra/board-dt-tegra20.c +++ b/arch/arm/mach-tegra/board-dt-tegra20.c @@ -94,6 +94,12 @@ struct of_dev_auxdata tegra20_auxdata_lookup[] __initdata = { OF_DEV_AUXDATA("nvidia,tegra20-slink", 0x7000D600, "spi_tegra.1", NULL), OF_DEV_AUXDATA("nvidia,tegra20-slink", 0x7000D800, "spi_tegra.2", NULL), OF_DEV_AUXDATA("nvidia,tegra20-slink", 0x7000DA00, "spi_tegra.3", NULL), + OF_DEV_AUXDATA("nvidia,tegra20-host1x", 0x50000000, "host1x", NULL), + OF_DEV_AUXDATA("nvidia,tegra20-dc", 0x54200000, "tegradc.0", NULL), + OF_DEV_AUXDATA("nvidia,tegra20-dc", 0x54240000, "tegradc.1", NULL), + OF_DEV_AUXDATA("nvidia,tegra20-hdmi", 0x54280000, "hdmi", NULL), + OF_DEV_AUXDATA("nvidia,tegra20-dsi", 0x54300000, "dsi", NULL), + OF_DEV_AUXDATA("nvidia,tegra20-tvo", 0x542c0000, "tvo", NULL), {} }; @@ -118,6 +124,9 @@ static __initdata struct tegra_clk_init_table tegra_dt_clk_init_table[] = { { "sbc2", "pll_p", 100000000, false }, { "sbc3", "pll_p", 100000000, false }, { "sbc4", "pll_p", 100000000, false }, + { "host1x", "pll_c", 150000000, false }, + { "disp1", "pll_p", 600000000, false }, + { "disp2", "pll_p", 600000000, false }, { NULL, NULL, 0, 0}, }; -- cgit v0.10.2 From 5f10778370e15ca6e74db75d7bbe888870e49e3f Mon Sep 17 00:00:00 2001 From: Thierry Reding Date: Thu, 15 Nov 2012 22:07:56 +0100 Subject: ARM: tegra: Add Tegra20 host1x clock support Extend the pll_d frequency table with a few entries to support common HDMI and LVDS display modes and setup the clock parents for the two display controllers and HDMI. Signed-off-by: Thierry Reding Signed-off-by: Stephen Warren diff --git a/arch/arm/mach-tegra/tegra20_clocks_data.c b/arch/arm/mach-tegra/tegra20_clocks_data.c index 9615ee3..a23a073 100644 --- a/arch/arm/mach-tegra/tegra20_clocks_data.c +++ b/arch/arm/mach-tegra/tegra20_clocks_data.c @@ -246,11 +246,16 @@ static struct clk_pll_freq_table tegra_pll_d_freq_table[] = { { 19200000, 216000000, 135, 12, 1, 3}, { 26000000, 216000000, 216, 26, 1, 4}, + { 12000000, 297000000, 99, 4, 1, 4 }, + { 12000000, 339000000, 113, 4, 1, 4 }, + { 12000000, 594000000, 594, 12, 1, 8}, { 13000000, 594000000, 594, 13, 1, 8}, { 19200000, 594000000, 495, 16, 1, 8}, { 26000000, 594000000, 594, 26, 1, 8}, + { 12000000, 616000000, 616, 12, 1, 8}, + { 12000000, 1000000000, 1000, 12, 1, 12}, { 13000000, 1000000000, 1000, 13, 1, 12}, { 19200000, 1000000000, 625, 12, 1, 8}, @@ -1036,9 +1041,6 @@ static struct clk_duplicate tegra_clk_duplicates[] = { CLK_DUPLICATE("usbd", "utmip-pad", NULL), CLK_DUPLICATE("usbd", "tegra-ehci.0", NULL), CLK_DUPLICATE("usbd", "tegra-otg", NULL), - CLK_DUPLICATE("hdmi", "tegradc.0", "hdmi"), - CLK_DUPLICATE("hdmi", "tegradc.1", "hdmi"), - CLK_DUPLICATE("host1x", "tegra_grhost", "host1x"), CLK_DUPLICATE("2d", "tegra_grhost", "gr2d"), CLK_DUPLICATE("3d", "tegra_grhost", "gr3d"), CLK_DUPLICATE("epp", "tegra_grhost", "epp"), @@ -1051,6 +1053,9 @@ static struct clk_duplicate tegra_clk_duplicates[] = { CLK_DUPLICATE("pll_p_out3", "tegra-i2c.1", "fast-clk"), CLK_DUPLICATE("pll_p_out3", "tegra-i2c.2", "fast-clk"), CLK_DUPLICATE("pll_p_out3", "tegra-i2c.3", "fast-clk"), + CLK_DUPLICATE("pll_p", "tegradc.0", "parent"), + CLK_DUPLICATE("pll_p", "tegradc.1", "parent"), + CLK_DUPLICATE("pll_d_out0", "hdmi", "parent"), }; #define CLK(dev, con, ck) \ -- cgit v0.10.2 From 2acc1fc28244465f1c83690ce84516f4b0080456 Mon Sep 17 00:00:00 2001 From: Thierry Reding Date: Thu, 15 Nov 2012 22:07:58 +0100 Subject: ARM: tegra: Add AUXDATA for Tegra30 host1x Add the OF_DEV_AUXDATA table entries required to associate the proper names with host1x and its children. In turn, this allows the devices to find the required clocks. Signed-off-by: Thierry Reding Signed-off-by: Stephen Warren diff --git a/arch/arm/mach-tegra/board-dt-tegra30.c b/arch/arm/mach-tegra/board-dt-tegra30.c index cd30338..6497d12 100644 --- a/arch/arm/mach-tegra/board-dt-tegra30.c +++ b/arch/arm/mach-tegra/board-dt-tegra30.c @@ -57,6 +57,12 @@ struct of_dev_auxdata tegra30_auxdata_lookup[] __initdata = { OF_DEV_AUXDATA("nvidia,tegra30-slink", 0x7000DA00, "spi_tegra.3", NULL), OF_DEV_AUXDATA("nvidia,tegra30-slink", 0x7000DC00, "spi_tegra.4", NULL), OF_DEV_AUXDATA("nvidia,tegra30-slink", 0x7000DE00, "spi_tegra.5", NULL), + OF_DEV_AUXDATA("nvidia,tegra30-host1x", 0x50000000, "host1x", NULL), + OF_DEV_AUXDATA("nvidia,tegra30-dc", 0x54200000, "tegradc.0", NULL), + OF_DEV_AUXDATA("nvidia,tegra30-dc", 0x54240000, "tegradc.1", NULL), + OF_DEV_AUXDATA("nvidia,tegra30-hdmi", 0x54280000, "hdmi", NULL), + OF_DEV_AUXDATA("nvidia,tegra30-dsi", 0x54300000, "dsi", NULL), + OF_DEV_AUXDATA("nvidia,tegra30-tvo", 0x542c0000, "tvo", NULL), {} }; @@ -82,6 +88,9 @@ static __initdata struct tegra_clk_init_table tegra_dt_clk_init_table[] = { { "sbc4", "pll_p", 100000000, false}, { "sbc5", "pll_p", 100000000, false}, { "sbc6", "pll_p", 100000000, false}, + { "host1x", "pll_c", 150000000, false}, + { "disp1", "pll_p", 600000000, false}, + { "disp2", "pll_p", 600000000, false}, { NULL, NULL, 0, 0}, }; -- cgit v0.10.2 From d1d3b978f67c2c000f9d91387cffa630e738d529 Mon Sep 17 00:00:00 2001 From: Thierry Reding Date: Thu, 15 Nov 2012 22:07:59 +0100 Subject: ARM: tegra: Add Tegra30 host1x clock support Setup the clock parents for the two display controllers and HDMI. Signed-off-by: Thierry Reding Signed-off-by: Stephen Warren diff --git a/arch/arm/mach-tegra/tegra30_clocks_data.c b/arch/arm/mach-tegra/tegra30_clocks_data.c index 7bc8b1d..6942c7a 100644 --- a/arch/arm/mach-tegra/tegra30_clocks_data.c +++ b/arch/arm/mach-tegra/tegra30_clocks_data.c @@ -1298,8 +1298,6 @@ struct clk_duplicate tegra_clk_duplicates[] = { CLK_DUPLICATE("usbd", "utmip-pad", NULL), CLK_DUPLICATE("usbd", "tegra-ehci.0", NULL), CLK_DUPLICATE("usbd", "tegra-otg", NULL), - CLK_DUPLICATE("hdmi", "tegradc.0", "hdmi"), - CLK_DUPLICATE("hdmi", "tegradc.1", "hdmi"), CLK_DUPLICATE("dsib", "tegradc.0", "dsib"), CLK_DUPLICATE("dsia", "tegradc.1", "dsia"), CLK_DUPLICATE("bsev", "tegra-avp", "bsev"), @@ -1337,6 +1335,9 @@ struct clk_duplicate tegra_clk_duplicates[] = { CLK_DUPLICATE("pll_p_out3", "tegra-i2c.2", "fast-clk"), CLK_DUPLICATE("pll_p_out3", "tegra-i2c.3", "fast-clk"), CLK_DUPLICATE("pll_p_out3", "tegra-i2c.4", "fast-clk"), + CLK_DUPLICATE("pll_p", "tegradc.0", "parent"), + CLK_DUPLICATE("pll_p", "tegradc.1", "parent"), + CLK_DUPLICATE("pll_d2_out0", "hdmi", "parent"), }; struct clk *tegra_ptr_clks[] = { -- cgit v0.10.2 From d5db9a44229058ddfe4773aaefa5a465344d7b10 Mon Sep 17 00:00:00 2001 From: Joseph Lo Date: Mon, 8 Oct 2012 18:24:16 +0800 Subject: ARM: tegra: cpuidle: replace LP3 with ARM_CPUIDLE_WFI_STATE The Tegra CPU idle LP3 state is doing ARM WFI only. So it's same with the common ARM_CPUIDLE_WFI_STATE. Using it to replace LP3 now. Signed-off-by: Joseph Lo Signed-off-by: Stephen Warren diff --git a/arch/arm/mach-tegra/cpuidle.c b/arch/arm/mach-tegra/cpuidle.c index 9a6f051..4e0b07c 100644 --- a/arch/arm/mach-tegra/cpuidle.c +++ b/arch/arm/mach-tegra/cpuidle.c @@ -23,58 +23,22 @@ #include #include -#include #include -#include -#include - -static int tegra_idle_enter_lp3(struct cpuidle_device *dev, - struct cpuidle_driver *drv, int index); +#include struct cpuidle_driver tegra_idle_driver = { .name = "tegra_idle", .owner = THIS_MODULE, + .en_core_tk_irqen = 1, .state_count = 1, .states = { - [0] = { - .enter = tegra_idle_enter_lp3, - .exit_latency = 10, - .target_residency = 10, - .power_usage = 600, - .flags = CPUIDLE_FLAG_TIME_VALID, - .name = "LP3", - .desc = "CPU flow-controlled", - }, + [0] = ARM_CPUIDLE_WFI_STATE_PWR(600), }, }; static DEFINE_PER_CPU(struct cpuidle_device, tegra_idle_device); -static int tegra_idle_enter_lp3(struct cpuidle_device *dev, - struct cpuidle_driver *drv, int index) -{ - ktime_t enter, exit; - s64 us; - - local_irq_disable(); - local_fiq_disable(); - - enter = ktime_get(); - - cpu_do_idle(); - - exit = ktime_sub(ktime_get(), enter); - us = ktime_to_us(exit); - - local_fiq_enable(); - local_irq_enable(); - - dev->last_residency = us; - - return index; -} - static int __init tegra_cpuidle_init(void) { int ret; -- cgit v0.10.2 From 641b4ef8f1fea88803cc1ff3f34d93ba6bcd8106 Mon Sep 17 00:00:00 2001 From: Joseph Lo Date: Mon, 8 Oct 2012 00:23:57 +0000 Subject: ARM: tegra: rename the file of "sleep-tXX" to "sleep-tegraXX" For the naming consistency under the mach-tegra, we re-name the file of "sleep-tXX" to "sleep-tegraXX" (e.g., sleep-t30 to sleep-tegra30). Signed-off-by: Joseph Lo Signed-off-by: Stephen Warren diff --git a/arch/arm/mach-tegra/Makefile b/arch/arm/mach-tegra/Makefile index 6cc23cc..dcd4726 100644 --- a/arch/arm/mach-tegra/Makefile +++ b/arch/arm/mach-tegra/Makefile @@ -14,11 +14,10 @@ obj-$(CONFIG_ARCH_TEGRA_2x_SOC) += tegra20_clocks.o obj-$(CONFIG_ARCH_TEGRA_2x_SOC) += tegra20_clocks_data.o obj-$(CONFIG_ARCH_TEGRA_2x_SOC) += tegra20_speedo.o obj-$(CONFIG_ARCH_TEGRA_2x_SOC) += tegra2_emc.o -obj-$(CONFIG_ARCH_TEGRA_2x_SOC) += sleep-t20.o +obj-$(CONFIG_ARCH_TEGRA_2x_SOC) += sleep-tegra20.o obj-$(CONFIG_ARCH_TEGRA_3x_SOC) += tegra30_clocks.o obj-$(CONFIG_ARCH_TEGRA_3x_SOC) += tegra30_clocks_data.o obj-$(CONFIG_ARCH_TEGRA_3x_SOC) += tegra30_speedo.o -obj-$(CONFIG_ARCH_TEGRA_3x_SOC) += sleep-t30.o obj-$(CONFIG_SMP) += platsmp.o headsmp.o obj-$(CONFIG_SMP) += reset.o obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o diff --git a/arch/arm/mach-tegra/sleep-t20.S b/arch/arm/mach-tegra/sleep-t20.S deleted file mode 100644 index 72ce709..0000000 --- a/arch/arm/mach-tegra/sleep-t20.S +++ /dev/null @@ -1,80 +0,0 @@ -/* - * Copyright (c) 2010-2012, NVIDIA Corporation. All rights reserved. - * Copyright (c) 2011, Google, Inc. - * - * Author: Colin Cross - * Gary King - * - * This program is free software; you can redistribute it and/or modify it - * under the terms and conditions of the GNU General Public License, - * version 2, as published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ - -#include - -#include - -#include "sleep.h" -#include "flowctrl.h" - -#if defined(CONFIG_HOTPLUG_CPU) || defined(CONFIG_PM_SLEEP) -/* - * tegra20_hotplug_shutdown(void) - * - * puts the current cpu in reset - * should never return - */ -ENTRY(tegra20_hotplug_shutdown) - /* Turn off SMP coherency */ - exit_smp r4, r5 - - /* Put this CPU down */ - cpu_id r0 - bl tegra20_cpu_shutdown - mov pc, lr @ should never get here -ENDPROC(tegra20_hotplug_shutdown) - -/* - * tegra20_cpu_shutdown(int cpu) - * - * r0 is cpu to reset - * - * puts the specified CPU in wait-for-event mode on the flow controller - * and puts the CPU in reset - * can be called on the current cpu or another cpu - * if called on the current cpu, does not return - * MUST NOT BE CALLED FOR CPU 0. - * - * corrupts r0-r3, r12 - */ -ENTRY(tegra20_cpu_shutdown) - cmp r0, #0 - moveq pc, lr @ must not be called for CPU 0 - - cpu_to_halt_reg r1, r0 - ldr r3, =TEGRA_FLOW_CTRL_VIRT - mov r2, #FLOW_CTRL_WAITEVENT | FLOW_CTRL_JTAG_RESUME - str r2, [r3, r1] @ put flow controller in wait event mode - ldr r2, [r3, r1] - isb - dsb - movw r1, 0x1011 - mov r1, r1, lsl r0 - ldr r3, =TEGRA_CLK_RESET_VIRT - str r1, [r3, #0x340] @ put slave CPU in reset - isb - dsb - cpu_id r3 - cmp r3, r0 - beq . - mov pc, lr -ENDPROC(tegra20_cpu_shutdown) -#endif diff --git a/arch/arm/mach-tegra/sleep-t30.S b/arch/arm/mach-tegra/sleep-t30.S deleted file mode 100644 index be7614b7..0000000 --- a/arch/arm/mach-tegra/sleep-t30.S +++ /dev/null @@ -1,105 +0,0 @@ -/* - * Copyright (c) 2012, NVIDIA Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms and conditions of the GNU General Public License, - * version 2, as published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ - -#include - -#include - -#include "sleep.h" -#include "flowctrl.h" - -#define TEGRA30_POWER_HOTPLUG_SHUTDOWN (1 << 27) /* Hotplug shutdown */ - -#if defined(CONFIG_HOTPLUG_CPU) || defined(CONFIG_PM_SLEEP) -/* - * tegra30_hotplug_shutdown(void) - * - * Powergates the current CPU. - * Should never return. - */ -ENTRY(tegra30_hotplug_shutdown) - /* Turn off SMP coherency */ - exit_smp r4, r5 - - /* Powergate this CPU */ - mov r0, #TEGRA30_POWER_HOTPLUG_SHUTDOWN - bl tegra30_cpu_shutdown - mov pc, lr @ should never get here -ENDPROC(tegra30_hotplug_shutdown) - -/* - * tegra30_cpu_shutdown(unsigned long flags) - * - * Puts the current CPU in wait-for-event mode on the flow controller - * and powergates it -- flags (in R0) indicate the request type. - * Must never be called for CPU 0. - * - * corrupts r0-r4, r12 - */ -ENTRY(tegra30_cpu_shutdown) - cpu_id r3 - cmp r3, #0 - moveq pc, lr @ Must never be called for CPU 0 - - ldr r12, =TEGRA_FLOW_CTRL_VIRT - cpu_to_csr_reg r1, r3 - add r1, r1, r12 @ virtual CSR address for this CPU - cpu_to_halt_reg r2, r3 - add r2, r2, r12 @ virtual HALT_EVENTS address for this CPU - - /* - * Clear this CPU's "event" and "interrupt" flags and power gate - * it when halting but not before it is in the "WFE" state. - */ - movw r12, \ - FLOW_CTRL_CSR_INTR_FLAG | FLOW_CTRL_CSR_EVENT_FLAG | \ - FLOW_CTRL_CSR_ENABLE - mov r4, #(1 << 4) - orr r12, r12, r4, lsl r3 - str r12, [r1] - - /* Halt this CPU. */ - mov r3, #0x400 -delay_1: - subs r3, r3, #1 @ delay as a part of wfe war. - bge delay_1; - cpsid a @ disable imprecise aborts. - ldr r3, [r1] @ read CSR - str r3, [r1] @ clear CSR - tst r0, #TEGRA30_POWER_HOTPLUG_SHUTDOWN - movne r3, #FLOW_CTRL_WAITEVENT @ For hotplug - str r3, [r2] - ldr r0, [r2] - b wfe_war - -__cpu_reset_again: - dsb - .align 5 - wfe @ CPU should be power gated here -wfe_war: - b __cpu_reset_again - - /* - * 38 nop's, which fills reset of wfe cache line and - * 4 more cachelines with nop - */ - .rept 38 - nop - .endr - b . @ should never get here - -ENDPROC(tegra30_cpu_shutdown) -#endif diff --git a/arch/arm/mach-tegra/sleep-tegra20.S b/arch/arm/mach-tegra/sleep-tegra20.S new file mode 100644 index 0000000..72ce709 --- /dev/null +++ b/arch/arm/mach-tegra/sleep-tegra20.S @@ -0,0 +1,80 @@ +/* + * Copyright (c) 2010-2012, NVIDIA Corporation. All rights reserved. + * Copyright (c) 2011, Google, Inc. + * + * Author: Colin Cross + * Gary King + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include + +#include + +#include "sleep.h" +#include "flowctrl.h" + +#if defined(CONFIG_HOTPLUG_CPU) || defined(CONFIG_PM_SLEEP) +/* + * tegra20_hotplug_shutdown(void) + * + * puts the current cpu in reset + * should never return + */ +ENTRY(tegra20_hotplug_shutdown) + /* Turn off SMP coherency */ + exit_smp r4, r5 + + /* Put this CPU down */ + cpu_id r0 + bl tegra20_cpu_shutdown + mov pc, lr @ should never get here +ENDPROC(tegra20_hotplug_shutdown) + +/* + * tegra20_cpu_shutdown(int cpu) + * + * r0 is cpu to reset + * + * puts the specified CPU in wait-for-event mode on the flow controller + * and puts the CPU in reset + * can be called on the current cpu or another cpu + * if called on the current cpu, does not return + * MUST NOT BE CALLED FOR CPU 0. + * + * corrupts r0-r3, r12 + */ +ENTRY(tegra20_cpu_shutdown) + cmp r0, #0 + moveq pc, lr @ must not be called for CPU 0 + + cpu_to_halt_reg r1, r0 + ldr r3, =TEGRA_FLOW_CTRL_VIRT + mov r2, #FLOW_CTRL_WAITEVENT | FLOW_CTRL_JTAG_RESUME + str r2, [r3, r1] @ put flow controller in wait event mode + ldr r2, [r3, r1] + isb + dsb + movw r1, 0x1011 + mov r1, r1, lsl r0 + ldr r3, =TEGRA_CLK_RESET_VIRT + str r1, [r3, #0x340] @ put slave CPU in reset + isb + dsb + cpu_id r3 + cmp r3, r0 + beq . + mov pc, lr +ENDPROC(tegra20_cpu_shutdown) +#endif diff --git a/arch/arm/mach-tegra/sleep-tegra30.S b/arch/arm/mach-tegra/sleep-tegra30.S new file mode 100644 index 0000000..be7614b7 --- /dev/null +++ b/arch/arm/mach-tegra/sleep-tegra30.S @@ -0,0 +1,105 @@ +/* + * Copyright (c) 2012, NVIDIA Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include + +#include + +#include "sleep.h" +#include "flowctrl.h" + +#define TEGRA30_POWER_HOTPLUG_SHUTDOWN (1 << 27) /* Hotplug shutdown */ + +#if defined(CONFIG_HOTPLUG_CPU) || defined(CONFIG_PM_SLEEP) +/* + * tegra30_hotplug_shutdown(void) + * + * Powergates the current CPU. + * Should never return. + */ +ENTRY(tegra30_hotplug_shutdown) + /* Turn off SMP coherency */ + exit_smp r4, r5 + + /* Powergate this CPU */ + mov r0, #TEGRA30_POWER_HOTPLUG_SHUTDOWN + bl tegra30_cpu_shutdown + mov pc, lr @ should never get here +ENDPROC(tegra30_hotplug_shutdown) + +/* + * tegra30_cpu_shutdown(unsigned long flags) + * + * Puts the current CPU in wait-for-event mode on the flow controller + * and powergates it -- flags (in R0) indicate the request type. + * Must never be called for CPU 0. + * + * corrupts r0-r4, r12 + */ +ENTRY(tegra30_cpu_shutdown) + cpu_id r3 + cmp r3, #0 + moveq pc, lr @ Must never be called for CPU 0 + + ldr r12, =TEGRA_FLOW_CTRL_VIRT + cpu_to_csr_reg r1, r3 + add r1, r1, r12 @ virtual CSR address for this CPU + cpu_to_halt_reg r2, r3 + add r2, r2, r12 @ virtual HALT_EVENTS address for this CPU + + /* + * Clear this CPU's "event" and "interrupt" flags and power gate + * it when halting but not before it is in the "WFE" state. + */ + movw r12, \ + FLOW_CTRL_CSR_INTR_FLAG | FLOW_CTRL_CSR_EVENT_FLAG | \ + FLOW_CTRL_CSR_ENABLE + mov r4, #(1 << 4) + orr r12, r12, r4, lsl r3 + str r12, [r1] + + /* Halt this CPU. */ + mov r3, #0x400 +delay_1: + subs r3, r3, #1 @ delay as a part of wfe war. + bge delay_1; + cpsid a @ disable imprecise aborts. + ldr r3, [r1] @ read CSR + str r3, [r1] @ clear CSR + tst r0, #TEGRA30_POWER_HOTPLUG_SHUTDOWN + movne r3, #FLOW_CTRL_WAITEVENT @ For hotplug + str r3, [r2] + ldr r0, [r2] + b wfe_war + +__cpu_reset_again: + dsb + .align 5 + wfe @ CPU should be power gated here +wfe_war: + b __cpu_reset_again + + /* + * 38 nop's, which fills reset of wfe cache line and + * 4 more cachelines with nop + */ + .rept 38 + nop + .endr + b . @ should never get here + +ENDPROC(tegra30_cpu_shutdown) +#endif -- cgit v0.10.2 From 0b25e25bef0e03c0465c3eb1119b32cb906db689 Mon Sep 17 00:00:00 2001 From: Joseph Lo Date: Wed, 31 Oct 2012 17:41:15 +0800 Subject: ARM: tegra: cpuidle: separate cpuidle driver for different chips The different Tegra chips may have different CPU idle states and data. Individual CPU idle driver make it more easy to maintain. Signed-off-by: Joseph Lo Signed-off-by: Stephen Warren diff --git a/arch/arm/mach-tegra/Makefile b/arch/arm/mach-tegra/Makefile index dcd4726..488159e 100644 --- a/arch/arm/mach-tegra/Makefile +++ b/arch/arm/mach-tegra/Makefile @@ -15,9 +15,16 @@ obj-$(CONFIG_ARCH_TEGRA_2x_SOC) += tegra20_clocks_data.o obj-$(CONFIG_ARCH_TEGRA_2x_SOC) += tegra20_speedo.o obj-$(CONFIG_ARCH_TEGRA_2x_SOC) += tegra2_emc.o obj-$(CONFIG_ARCH_TEGRA_2x_SOC) += sleep-tegra20.o +ifeq ($(CONFIG_CPU_IDLE),y) +obj-$(CONFIG_ARCH_TEGRA_2x_SOC) += cpuidle-tegra20.o +endif obj-$(CONFIG_ARCH_TEGRA_3x_SOC) += tegra30_clocks.o obj-$(CONFIG_ARCH_TEGRA_3x_SOC) += tegra30_clocks_data.o obj-$(CONFIG_ARCH_TEGRA_3x_SOC) += tegra30_speedo.o +obj-$(CONFIG_ARCH_TEGRA_3x_SOC) += sleep-tegra30.o +ifeq ($(CONFIG_CPU_IDLE),y) +obj-$(CONFIG_ARCH_TEGRA_3x_SOC) += cpuidle-tegra30.o +endif obj-$(CONFIG_SMP) += platsmp.o headsmp.o obj-$(CONFIG_SMP) += reset.o obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o diff --git a/arch/arm/mach-tegra/cpuidle-tegra20.c b/arch/arm/mach-tegra/cpuidle-tegra20.c new file mode 100644 index 0000000..d32e8b0 --- /dev/null +++ b/arch/arm/mach-tegra/cpuidle-tegra20.c @@ -0,0 +1,66 @@ +/* + * CPU idle driver for Tegra CPUs + * + * Copyright (c) 2010-2012, NVIDIA Corporation. + * Copyright (c) 2011 Google, Inc. + * Author: Colin Cross + * Gary King + * + * Rework for 3.3 by Peter De Schrijver + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + */ + +#include +#include +#include + +#include + +static struct cpuidle_driver tegra_idle_driver = { + .name = "tegra_idle", + .owner = THIS_MODULE, + .en_core_tk_irqen = 1, + .state_count = 1, + .states = { + [0] = ARM_CPUIDLE_WFI_STATE_PWR(600), + }, +}; + +static DEFINE_PER_CPU(struct cpuidle_device, tegra_idle_device); + +int __init tegra20_cpuidle_init(void) +{ + int ret; + unsigned int cpu; + struct cpuidle_device *dev; + struct cpuidle_driver *drv = &tegra_idle_driver; + + ret = cpuidle_register_driver(&tegra_idle_driver); + if (ret) { + pr_err("CPUidle driver registration failed\n"); + return ret; + } + + for_each_possible_cpu(cpu) { + dev = &per_cpu(tegra_idle_device, cpu); + dev->cpu = cpu; + + dev->state_count = drv->state_count; + ret = cpuidle_register_device(dev); + if (ret) { + pr_err("CPU%u: CPUidle device registration failed\n", + cpu); + return ret; + } + } + return 0; +} diff --git a/arch/arm/mach-tegra/cpuidle-tegra30.c b/arch/arm/mach-tegra/cpuidle-tegra30.c new file mode 100644 index 0000000..37e7551 --- /dev/null +++ b/arch/arm/mach-tegra/cpuidle-tegra30.c @@ -0,0 +1,66 @@ +/* + * CPU idle driver for Tegra CPUs + * + * Copyright (c) 2010-2012, NVIDIA Corporation. + * Copyright (c) 2011 Google, Inc. + * Author: Colin Cross + * Gary King + * + * Rework for 3.3 by Peter De Schrijver + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + */ + +#include +#include +#include + +#include + +static struct cpuidle_driver tegra_idle_driver = { + .name = "tegra_idle", + .owner = THIS_MODULE, + .en_core_tk_irqen = 1, + .state_count = 1, + .states = { + [0] = ARM_CPUIDLE_WFI_STATE_PWR(600), + }, +}; + +static DEFINE_PER_CPU(struct cpuidle_device, tegra_idle_device); + +int __init tegra30_cpuidle_init(void) +{ + int ret; + unsigned int cpu; + struct cpuidle_device *dev; + struct cpuidle_driver *drv = &tegra_idle_driver; + + ret = cpuidle_register_driver(&tegra_idle_driver); + if (ret) { + pr_err("CPUidle driver registration failed\n"); + return ret; + } + + for_each_possible_cpu(cpu) { + dev = &per_cpu(tegra_idle_device, cpu); + dev->cpu = cpu; + + dev->state_count = drv->state_count; + ret = cpuidle_register_device(dev); + if (ret) { + pr_err("CPU%u: CPUidle device registration failed\n", + cpu); + return ret; + } + } + return 0; +} diff --git a/arch/arm/mach-tegra/cpuidle.c b/arch/arm/mach-tegra/cpuidle.c index 4e0b07c..d065139 100644 --- a/arch/arm/mach-tegra/cpuidle.c +++ b/arch/arm/mach-tegra/cpuidle.c @@ -23,47 +23,26 @@ #include #include -#include -#include - -struct cpuidle_driver tegra_idle_driver = { - .name = "tegra_idle", - .owner = THIS_MODULE, - .en_core_tk_irqen = 1, - .state_count = 1, - .states = { - [0] = ARM_CPUIDLE_WFI_STATE_PWR(600), - }, -}; - -static DEFINE_PER_CPU(struct cpuidle_device, tegra_idle_device); +#include "fuse.h" +#include "cpuidle.h" static int __init tegra_cpuidle_init(void) { int ret; - unsigned int cpu; - struct cpuidle_device *dev; - struct cpuidle_driver *drv = &tegra_idle_driver; - ret = cpuidle_register_driver(&tegra_idle_driver); - if (ret) { - pr_err("CPUidle driver registration failed\n"); - return ret; + switch (tegra_chip_id) { + case TEGRA20: + ret = tegra20_cpuidle_init(); + break; + case TEGRA30: + ret = tegra30_cpuidle_init(); + break; + default: + ret = -ENODEV; + break; } - for_each_possible_cpu(cpu) { - dev = &per_cpu(tegra_idle_device, cpu); - dev->cpu = cpu; - - dev->state_count = drv->state_count; - ret = cpuidle_register_device(dev); - if (ret) { - pr_err("CPU%u: CPUidle device registration failed\n", - cpu); - return ret; - } - } - return 0; + return ret; } device_initcall(tegra_cpuidle_init); diff --git a/arch/arm/mach-tegra/cpuidle.h b/arch/arm/mach-tegra/cpuidle.h new file mode 100644 index 0000000..496204d --- /dev/null +++ b/arch/arm/mach-tegra/cpuidle.h @@ -0,0 +1,32 @@ +/* + * Copyright (c) 2012, NVIDIA Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#ifndef __MACH_TEGRA_CPUIDLE_H +#define __MACH_TEGRA_CPUIDLE_H + +#ifdef CONFIG_ARCH_TEGRA_2x_SOC +int tegra20_cpuidle_init(void); +#else +static inline int tegra20_cpuidle_init(void) { return -ENODEV; } +#endif + +#ifdef CONFIG_ARCH_TEGRA_3x_SOC +int tegra30_cpuidle_init(void); +#else +static inline int tegra30_cpuidle_init(void) { return -ENODEV; } +#endif + +#endif -- cgit v0.10.2 From d3f293656c07a1147c11e8c8774d7955a903cee0 Mon Sep 17 00:00:00 2001 From: Joseph Lo Date: Wed, 31 Oct 2012 17:41:16 +0800 Subject: ARM: tegra: cpuidle: add CPU resume function The CPU suspending on Tegra means CPU power gating. We add a resume function for taking care the CPUs that resume from power gating status. This function was been hooked to the reset handler. We take care everything here before go into kernel. Be aware of that, you may see the legacy power status "LP2" in the code which is exactly the same meaning of "CPU power down". Based on the work by: Scott Williams Colin Cross Gary King Signed-off-by: Joseph Lo Signed-off-by: Stephen Warren diff --git a/arch/arm/mach-tegra/headsmp.S b/arch/arm/mach-tegra/headsmp.S index 93f0370..82dc84b 100644 --- a/arch/arm/mach-tegra/headsmp.S +++ b/arch/arm/mach-tegra/headsmp.S @@ -68,6 +68,55 @@ ENTRY(tegra_secondary_startup) b secondary_startup ENDPROC(tegra_secondary_startup) +#ifdef CONFIG_PM_SLEEP +/* + * tegra_resume + * + * CPU boot vector when restarting the a CPU following + * an LP2 transition. Also branched to by LP0 and LP1 resume after + * re-enabling sdram. + */ +ENTRY(tegra_resume) + bl v7_invalidate_l1 + /* Enable coresight */ + mov32 r0, 0xC5ACCE55 + mcr p14, 0, r0, c7, c12, 6 + + cpu_id r0 + cmp r0, #0 @ CPU0? + bne cpu_resume @ no + +#ifdef CONFIG_ARCH_TEGRA_3x_SOC + /* Are we on Tegra20? */ + mov32 r6, TEGRA_APB_MISC_BASE + ldr r0, [r6, #APB_MISC_GP_HIDREV] + and r0, r0, #0xff00 + cmp r0, #(0x20 << 8) + beq 1f @ Yes + /* Clear the flow controller flags for this CPU. */ + mov32 r2, TEGRA_FLOW_CTRL_BASE + FLOW_CTRL_CPU0_CSR @ CPU0 CSR + ldr r1, [r2] + /* Clear event & intr flag */ + orr r1, r1, \ + #FLOW_CTRL_CSR_INTR_FLAG | FLOW_CTRL_CSR_EVENT_FLAG + movw r0, #0x0FFD @ enable, cluster_switch, immed, & bitmaps + bic r1, r1, r0 + str r1, [r2] +1: +#endif + +#ifdef CONFIG_HAVE_ARM_SCU + /* enable SCU */ + mov32 r0, TEGRA_ARM_PERIF_BASE + ldr r1, [r0] + orr r1, r1, #1 + str r1, [r0] +#endif + + b cpu_resume +ENDPROC(tegra_resume) +#endif + .align L1_CACHE_SHIFT ENTRY(__tegra_cpu_reset_handler_start) @@ -121,6 +170,17 @@ ENTRY(__tegra_cpu_reset_handler) 1: #endif + /* Waking up from LP2? */ + ldr r9, [r12, #RESET_DATA(MASK_LP2)] + tst r9, r11 @ if in_lp2 + beq __is_not_lp2 + ldr lr, [r12, #RESET_DATA(STARTUP_LP2)] + cmp lr, #0 + bleq __die @ no LP2 startup handler + bx lr + +__is_not_lp2: + #ifdef CONFIG_SMP /* * Can only be secondary boot (initial or hotplug) but CPU 0 diff --git a/arch/arm/mach-tegra/reset.c b/arch/arm/mach-tegra/reset.c index e05da7d..3fd89ec 100644 --- a/arch/arm/mach-tegra/reset.c +++ b/arch/arm/mach-tegra/reset.c @@ -25,6 +25,7 @@ #include "iomap.h" #include "irammap.h" #include "reset.h" +#include "sleep.h" #include "fuse.h" #define TEGRA_IRAM_RESET_BASE (TEGRA_IRAM_BASE + \ @@ -79,5 +80,10 @@ void __init tegra_cpu_reset_handler_init(void) virt_to_phys((void *)tegra_secondary_startup); #endif +#ifdef CONFIG_PM_SLEEP + __tegra_cpu_reset_handler_data[TEGRA_RESET_STARTUP_LP2] = + virt_to_phys((void *)tegra_resume); +#endif + tegra_cpu_reset_handler_enable(); } diff --git a/arch/arm/mach-tegra/sleep.h b/arch/arm/mach-tegra/sleep.h index 4889b28..addb83f 100644 --- a/arch/arm/mach-tegra/sleep.h +++ b/arch/arm/mach-tegra/sleep.h @@ -72,6 +72,7 @@ dsb .endm #else +void tegra_resume(void); #ifdef CONFIG_HOTPLUG_CPU void tegra20_hotplug_init(void); -- cgit v0.10.2 From d457ef358f3c7179c428becda45b1dfd2b8cf98a Mon Sep 17 00:00:00 2001 From: Joseph Lo Date: Wed, 31 Oct 2012 17:41:17 +0800 Subject: ARM: tegra30: cpuidle: add powered-down state for secondary CPUs This supports power-gated idle on secondary CPUs for Tegra30. The secondary CPUs can go into powered-down state independently. When CPU goes into this state, it saves it's contexts and puts itself to flow controlled WFI state. After that, it will been power gated. Be aware of that, you may see the legacy power state "LP2" in the code which is exactly the same meaning of "CPU power down". Based on the work by: Scott Williams Signed-off-by: Joseph Lo Signed-off-by: Stephen Warren diff --git a/arch/arm/mach-tegra/Makefile b/arch/arm/mach-tegra/Makefile index 488159e..0979e8b 100644 --- a/arch/arm/mach-tegra/Makefile +++ b/arch/arm/mach-tegra/Makefile @@ -8,6 +8,7 @@ obj-y += pmc.o obj-y += flowctrl.o obj-y += powergate.o obj-y += apbio.o +obj-y += pm.o obj-$(CONFIG_CPU_IDLE) += cpuidle.o obj-$(CONFIG_CPU_IDLE) += sleep.o obj-$(CONFIG_ARCH_TEGRA_2x_SOC) += tegra20_clocks.o diff --git a/arch/arm/mach-tegra/cpuidle-tegra30.c b/arch/arm/mach-tegra/cpuidle-tegra30.c index 37e7551..cc48d7f 100644 --- a/arch/arm/mach-tegra/cpuidle-tegra30.c +++ b/arch/arm/mach-tegra/cpuidle-tegra30.c @@ -22,21 +22,107 @@ #include #include #include +#include +#include #include +#include +#include +#include + +#include "pm.h" +#include "sleep.h" + +#ifdef CONFIG_PM_SLEEP +static int tegra30_idle_lp2(struct cpuidle_device *dev, + struct cpuidle_driver *drv, + int index); +#endif static struct cpuidle_driver tegra_idle_driver = { .name = "tegra_idle", .owner = THIS_MODULE, .en_core_tk_irqen = 1, +#ifdef CONFIG_PM_SLEEP + .state_count = 2, +#else .state_count = 1, +#endif .states = { [0] = ARM_CPUIDLE_WFI_STATE_PWR(600), +#ifdef CONFIG_PM_SLEEP + [1] = { + .enter = tegra30_idle_lp2, + .exit_latency = 2000, + .target_residency = 2200, + .power_usage = 0, + .flags = CPUIDLE_FLAG_TIME_VALID, + .name = "powered-down", + .desc = "CPU power gated", + }, +#endif }, }; static DEFINE_PER_CPU(struct cpuidle_device, tegra_idle_device); +#ifdef CONFIG_PM_SLEEP +#ifdef CONFIG_SMP +static bool tegra30_cpu_core_power_down(struct cpuidle_device *dev, + struct cpuidle_driver *drv, + int index) +{ + clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_ENTER, &dev->cpu); + + smp_wmb(); + + save_cpu_arch_register(); + + cpu_suspend(0, tegra30_sleep_cpu_secondary_finish); + + restore_cpu_arch_register(); + + clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_EXIT, &dev->cpu); + + return true; +} +#else +static inline bool tegra30_cpu_core_power_down(struct cpuidle_device *dev, + struct cpuidle_driver *drv, + int index) +{ + return true; +} +#endif + +static int __cpuinit tegra30_idle_lp2(struct cpuidle_device *dev, + struct cpuidle_driver *drv, + int index) +{ + u32 cpu = is_smp() ? cpu_logical_map(dev->cpu) : dev->cpu; + bool entered_lp2 = false; + + local_fiq_disable(); + + tegra_set_cpu_in_lp2(cpu); + cpu_pm_enter(); + + if (cpu == 0) + cpu_do_idle(); + else + entered_lp2 = tegra30_cpu_core_power_down(dev, drv, index); + + cpu_pm_exit(); + tegra_clear_cpu_in_lp2(cpu); + + local_fiq_enable(); + + smp_rmb(); + + return (entered_lp2) ? index : 0; +} +#endif + int __init tegra30_cpuidle_init(void) { int ret; diff --git a/arch/arm/mach-tegra/pm.c b/arch/arm/mach-tegra/pm.c new file mode 100644 index 0000000..f88595a --- /dev/null +++ b/arch/arm/mach-tegra/pm.c @@ -0,0 +1,74 @@ +/* + * CPU complex suspend & resume functions for Tegra SoCs + * + * Copyright (c) 2009-2012, NVIDIA Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include +#include +#include +#include + +#include "iomap.h" +#include "reset.h" + +#ifdef CONFIG_PM_SLEEP +static unsigned int g_diag_reg; +static DEFINE_SPINLOCK(tegra_lp2_lock); + +void save_cpu_arch_register(void) +{ + /* read diagnostic register */ + asm("mrc p15, 0, %0, c15, c0, 1" : "=r"(g_diag_reg) : : "cc"); + return; +} + +void restore_cpu_arch_register(void) +{ + /* write diagnostic register */ + asm("mcr p15, 0, %0, c15, c0, 1" : : "r"(g_diag_reg) : "cc"); + return; +} + +void __cpuinit tegra_clear_cpu_in_lp2(int phy_cpu_id) +{ + u32 *cpu_in_lp2 = tegra_cpu_lp2_mask; + + spin_lock(&tegra_lp2_lock); + + BUG_ON(!(*cpu_in_lp2 & BIT(phy_cpu_id))); + *cpu_in_lp2 &= ~BIT(phy_cpu_id); + + spin_unlock(&tegra_lp2_lock); +} + +bool __cpuinit tegra_set_cpu_in_lp2(int phy_cpu_id) +{ + bool last_cpu = false; + cpumask_t *cpu_lp2_mask = tegra_cpu_lp2_mask; + u32 *cpu_in_lp2 = tegra_cpu_lp2_mask; + + spin_lock(&tegra_lp2_lock); + + BUG_ON((*cpu_in_lp2 & BIT(phy_cpu_id))); + *cpu_in_lp2 |= BIT(phy_cpu_id); + + if ((phy_cpu_id == 0) && cpumask_equal(cpu_lp2_mask, cpu_online_mask)) + last_cpu = true; + + spin_unlock(&tegra_lp2_lock); + return last_cpu; +} +#endif diff --git a/arch/arm/mach-tegra/pm.h b/arch/arm/mach-tegra/pm.h new file mode 100644 index 0000000..bcfc45f --- /dev/null +++ b/arch/arm/mach-tegra/pm.h @@ -0,0 +1,30 @@ +/* + * Copyright (C) 2010 Google, Inc. + * Copyright (c) 2010-2012 NVIDIA Corporation. All rights reserved. + * + * Author: + * Colin Cross + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#ifndef _MACH_TEGRA_PM_H_ +#define _MACH_TEGRA_PM_H_ + +void save_cpu_arch_register(void); +void restore_cpu_arch_register(void); + +void tegra_clear_cpu_in_lp2(int phy_cpu_id); +bool tegra_set_cpu_in_lp2(int phy_cpu_id); + +#endif /* _MACH_TEGRA_PM_H_ */ diff --git a/arch/arm/mach-tegra/reset.h b/arch/arm/mach-tegra/reset.h index de88bf8..c90d8e9 100644 --- a/arch/arm/mach-tegra/reset.h +++ b/arch/arm/mach-tegra/reset.h @@ -29,6 +29,8 @@ #ifndef __ASSEMBLY__ +#include "irammap.h" + extern unsigned long __tegra_cpu_reset_handler_data[TEGRA_RESET_DATA_SIZE]; void __tegra_cpu_reset_handler_start(void); @@ -36,6 +38,13 @@ void __tegra_cpu_reset_handler(void); void __tegra_cpu_reset_handler_end(void); void tegra_secondary_startup(void); +#ifdef CONFIG_PM_SLEEP +#define tegra_cpu_lp2_mask \ + (IO_ADDRESS(TEGRA_IRAM_BASE + TEGRA_IRAM_RESET_HANDLER_OFFSET + \ + ((u32)&__tegra_cpu_reset_handler_data[TEGRA_RESET_MASK_LP2] - \ + (u32)__tegra_cpu_reset_handler_start))) +#endif + #define tegra_cpu_reset_handler_offset \ ((u32)__tegra_cpu_reset_handler - \ (u32)__tegra_cpu_reset_handler_start) diff --git a/arch/arm/mach-tegra/sleep-tegra30.S b/arch/arm/mach-tegra/sleep-tegra30.S index be7614b7..59984d7 100644 --- a/arch/arm/mach-tegra/sleep-tegra30.S +++ b/arch/arm/mach-tegra/sleep-tegra30.S @@ -17,6 +17,7 @@ #include #include +#include #include "sleep.h" #include "flowctrl.h" @@ -80,6 +81,7 @@ delay_1: ldr r3, [r1] @ read CSR str r3, [r1] @ clear CSR tst r0, #TEGRA30_POWER_HOTPLUG_SHUTDOWN + moveq r3, #FLOW_CTRL_WAIT_FOR_INTERRUPT @ For LP2 movne r3, #FLOW_CTRL_WAITEVENT @ For hotplug str r3, [r2] ldr r0, [r2] @@ -103,3 +105,23 @@ wfe_war: ENDPROC(tegra30_cpu_shutdown) #endif + +#ifdef CONFIG_PM_SLEEP +/* + * tegra30_sleep_cpu_secondary_finish(unsigned long v2p) + * + * Enters LP2 on secondary CPU by exiting coherency and powergating the CPU. + */ +ENTRY(tegra30_sleep_cpu_secondary_finish) + mov r7, lr + + /* Flush and disable the L1 data cache */ + bl tegra_disable_clean_inv_dcache + + /* Powergate this CPU. */ + mov r0, #0 @ power mode flags (!hotplug) + bl tegra30_cpu_shutdown + mov r0, #1 @ never return here + mov pc, r7 +ENDPROC(tegra30_sleep_cpu_secondary_finish) +#endif diff --git a/arch/arm/mach-tegra/sleep.S b/arch/arm/mach-tegra/sleep.S index 08e9481..91548a7 100644 --- a/arch/arm/mach-tegra/sleep.S +++ b/arch/arm/mach-tegra/sleep.S @@ -25,9 +25,38 @@ #include #include +#include #include "iomap.h" #include "flowctrl.h" #include "sleep.h" +#ifdef CONFIG_PM_SLEEP +/* + * tegra_disable_clean_inv_dcache + * + * disable, clean & invalidate the D-cache + * + * Corrupted registers: r1-r3, r6, r8, r9-r11 + */ +ENTRY(tegra_disable_clean_inv_dcache) + stmfd sp!, {r0, r4-r5, r7, r9-r11, lr} + dmb @ ensure ordering + + /* Disable the D-cache */ + mrc p15, 0, r2, c1, c0, 0 + bic r2, r2, #CR_C + mcr p15, 0, r2, c1, c0, 0 + isb + + /* Flush the D-cache */ + bl v7_flush_dcache_louis + + /* Trun off coherency */ + exit_smp r4, r5 + + ldmfd sp!, {r0, r4-r5, r7, r9-r11, pc} +ENDPROC(tegra_disable_clean_inv_dcache) + +#endif diff --git a/arch/arm/mach-tegra/sleep.h b/arch/arm/mach-tegra/sleep.h index addb83f..bacf549 100644 --- a/arch/arm/mach-tegra/sleep.h +++ b/arch/arm/mach-tegra/sleep.h @@ -82,5 +82,7 @@ static inline void tegra20_hotplug_init(void) {} static inline void tegra30_hotplug_init(void) {} #endif +int tegra30_sleep_cpu_secondary_finish(unsigned long); + #endif #endif -- cgit v0.10.2 From fe508d776908b8512c6d936eb29e40bef1f4b8fc Mon Sep 17 00:00:00 2001 From: Joseph Lo Date: Wed, 31 Oct 2012 17:41:18 +0800 Subject: ARM: tegra30: common: enable csite clock Enable csite (debug and trace controller) clock at init to prevent it be disabled. And this also the necessary clock for CPU be brought up or resumed from a power-gating low power state. Signed-off-by: Joseph Lo Signed-off-by: Stephen Warren diff --git a/arch/arm/mach-tegra/common.c b/arch/arm/mach-tegra/common.c index 3e03e5f..203a8b9 100644 --- a/arch/arm/mach-tegra/common.c +++ b/arch/arm/mach-tegra/common.c @@ -108,6 +108,7 @@ static __initdata struct tegra_clk_init_table tegra30_clk_init_table[] = { { "sclk", "pll_p_out4", 102000000, true }, { "hclk", "sclk", 102000000, true }, { "pclk", "hclk", 51000000, true }, + { "csite", NULL, 0, true }, { NULL, NULL, 0, 0}, }; #endif -- cgit v0.10.2 From a6e293eef2eafc31dbe008301182e7124bd87755 Mon Sep 17 00:00:00 2001 From: Joseph Lo Date: Wed, 31 Oct 2012 17:41:19 +0800 Subject: ARM: tegra30: clocks: add CPU low-power function into tegra_cpu_car_ops Add suspend, resume and rail_off_ready API into tegra_cpu_car_ops. These functions were used for CPU powered-down state maintenance. One thing needs to notice the rail_off_ready API only availalbe for cpu_g cluster not cpu_lp cluster. Signed-off-by: Joseph Lo Signed-off-by: Stephen Warren diff --git a/arch/arm/mach-tegra/tegra30_clocks.c b/arch/arm/mach-tegra/tegra30_clocks.c index f5b453f..efc000e 100644 --- a/arch/arm/mach-tegra/tegra30_clocks.c +++ b/arch/arm/mach-tegra/tegra30_clocks.c @@ -31,6 +31,8 @@ #include +#include + #include "clock.h" #include "fuse.h" #include "iomap.h" @@ -309,6 +311,31 @@ #define CPU_CLOCK(cpu) (0x1 << (8 + cpu)) #define CPU_RESET(cpu) (0x1111ul << (cpu)) +#define CLK_RESET_CCLK_BURST 0x20 +#define CLK_RESET_CCLK_DIVIDER 0x24 +#define CLK_RESET_PLLX_BASE 0xe0 +#define CLK_RESET_PLLX_MISC 0xe4 + +#define CLK_RESET_SOURCE_CSITE 0x1d4 + +#define CLK_RESET_CCLK_BURST_POLICY_SHIFT 28 +#define CLK_RESET_CCLK_RUN_POLICY_SHIFT 4 +#define CLK_RESET_CCLK_IDLE_POLICY_SHIFT 0 +#define CLK_RESET_CCLK_IDLE_POLICY 1 +#define CLK_RESET_CCLK_RUN_POLICY 2 +#define CLK_RESET_CCLK_BURST_POLICY_PLLX 8 + +#ifdef CONFIG_PM_SLEEP +static struct cpu_clk_suspend_context { + u32 pllx_misc; + u32 pllx_base; + + u32 cpu_burst; + u32 clk_csite_src; + u32 cclk_divider; +} tegra30_cpu_clk_sctx; +#endif + /** * Structure defining the fields for USB UTMI clocks Parameters. */ @@ -2386,12 +2413,93 @@ static void tegra30_disable_cpu_clock(u32 cpu) reg_clk_base + TEGRA_CLK_RST_CONTROLLER_CLK_CPU_CMPLX); } +#ifdef CONFIG_PM_SLEEP +static bool tegra30_cpu_rail_off_ready(void) +{ + unsigned int cpu_rst_status; + int cpu_pwr_status; + + cpu_rst_status = readl(reg_clk_base + + TEGRA30_CLK_RST_CONTROLLER_CPU_CMPLX_STATUS); + cpu_pwr_status = tegra_powergate_is_powered(TEGRA_POWERGATE_CPU1) || + tegra_powergate_is_powered(TEGRA_POWERGATE_CPU2) || + tegra_powergate_is_powered(TEGRA_POWERGATE_CPU3); + + if (((cpu_rst_status & 0xE) != 0xE) || cpu_pwr_status) + return false; + + return true; +} + +static void tegra30_cpu_clock_suspend(void) +{ + /* switch coresite to clk_m, save off original source */ + tegra30_cpu_clk_sctx.clk_csite_src = + readl(reg_clk_base + CLK_RESET_SOURCE_CSITE); + writel(3<<30, reg_clk_base + CLK_RESET_SOURCE_CSITE); + + tegra30_cpu_clk_sctx.cpu_burst = + readl(reg_clk_base + CLK_RESET_CCLK_BURST); + tegra30_cpu_clk_sctx.pllx_base = + readl(reg_clk_base + CLK_RESET_PLLX_BASE); + tegra30_cpu_clk_sctx.pllx_misc = + readl(reg_clk_base + CLK_RESET_PLLX_MISC); + tegra30_cpu_clk_sctx.cclk_divider = + readl(reg_clk_base + CLK_RESET_CCLK_DIVIDER); +} + +static void tegra30_cpu_clock_resume(void) +{ + unsigned int reg, policy; + + /* Is CPU complex already running on PLLX? */ + reg = readl(reg_clk_base + CLK_RESET_CCLK_BURST); + policy = (reg >> CLK_RESET_CCLK_BURST_POLICY_SHIFT) & 0xF; + + if (policy == CLK_RESET_CCLK_IDLE_POLICY) + reg = (reg >> CLK_RESET_CCLK_IDLE_POLICY_SHIFT) & 0xF; + else if (policy == CLK_RESET_CCLK_RUN_POLICY) + reg = (reg >> CLK_RESET_CCLK_RUN_POLICY_SHIFT) & 0xF; + else + BUG(); + + if (reg != CLK_RESET_CCLK_BURST_POLICY_PLLX) { + /* restore PLLX settings if CPU is on different PLL */ + writel(tegra30_cpu_clk_sctx.pllx_misc, + reg_clk_base + CLK_RESET_PLLX_MISC); + writel(tegra30_cpu_clk_sctx.pllx_base, + reg_clk_base + CLK_RESET_PLLX_BASE); + + /* wait for PLL stabilization if PLLX was enabled */ + if (tegra30_cpu_clk_sctx.pllx_base & (1 << 30)) + udelay(300); + } + + /* + * Restore original burst policy setting for calls resulting from CPU + * LP2 in idle or system suspend. + */ + writel(tegra30_cpu_clk_sctx.cclk_divider, + reg_clk_base + CLK_RESET_CCLK_DIVIDER); + writel(tegra30_cpu_clk_sctx.cpu_burst, + reg_clk_base + CLK_RESET_CCLK_BURST); + + writel(tegra30_cpu_clk_sctx.clk_csite_src, + reg_clk_base + CLK_RESET_SOURCE_CSITE); +} +#endif + static struct tegra_cpu_car_ops tegra30_cpu_car_ops = { .wait_for_reset = tegra30_wait_cpu_in_reset, .put_in_reset = tegra30_put_cpu_in_reset, .out_of_reset = tegra30_cpu_out_of_reset, .enable_clock = tegra30_enable_cpu_clock, .disable_clock = tegra30_disable_cpu_clock, +#ifdef CONFIG_PM_SLEEP + .rail_off_ready = tegra30_cpu_rail_off_ready, + .suspend = tegra30_cpu_clock_suspend, + .resume = tegra30_cpu_clock_resume, +#endif }; void __init tegra30_cpu_car_ops_init(void) diff --git a/arch/arm/mach-tegra/tegra_cpu_car.h b/arch/arm/mach-tegra/tegra_cpu_car.h index 30d063a..9764d31 100644 --- a/arch/arm/mach-tegra/tegra_cpu_car.h +++ b/arch/arm/mach-tegra/tegra_cpu_car.h @@ -30,6 +30,12 @@ * CPU clock un-gate * disable_clock: * CPU clock gate + * rail_off_ready: + * CPU is ready for rail off + * suspend: + * save the clock settings when CPU go into low-power state + * resume: + * restore the clock settings when CPU exit low-power state */ struct tegra_cpu_car_ops { void (*wait_for_reset)(u32 cpu); @@ -37,6 +43,11 @@ struct tegra_cpu_car_ops { void (*out_of_reset)(u32 cpu); void (*enable_clock)(u32 cpu); void (*disable_clock)(u32 cpu); +#ifdef CONFIG_PM_SLEEP + bool (*rail_off_ready)(void); + void (*suspend)(void); + void (*resume)(void); +#endif }; extern struct tegra_cpu_car_ops *tegra_cpu_car_ops; @@ -81,6 +92,32 @@ static inline void tegra_disable_cpu_clock(u32 cpu) tegra_cpu_car_ops->disable_clock(cpu); } +#ifdef CONFIG_PM_SLEEP +static inline bool tegra_cpu_rail_off_ready(void) +{ + if (WARN_ON(!tegra_cpu_car_ops->rail_off_ready)) + return false; + + return tegra_cpu_car_ops->rail_off_ready(); +} + +static inline void tegra_cpu_clock_suspend(void) +{ + if (WARN_ON(!tegra_cpu_car_ops->suspend)) + return; + + tegra_cpu_car_ops->suspend(); +} + +static inline void tegra_cpu_clock_resume(void) +{ + if (WARN_ON(!tegra_cpu_car_ops->resume)) + return; + + tegra_cpu_car_ops->resume(); +} +#endif + void tegra20_cpu_car_ops_init(void); void tegra30_cpu_car_ops_init(void); -- cgit v0.10.2 From 01459c69dd48badeb7833c3293e43f7b8ae75e31 Mon Sep 17 00:00:00 2001 From: Joseph Lo Date: Wed, 31 Oct 2012 17:41:20 +0800 Subject: ARM: tegra30: flowctrl: add cpu_suspend_exter/exit function The flow controller can help CPU to go into suspend mode (powered-down state). When CPU go into powered-down state, it needs some careful settings before getting into and after leaving. The enter and exit functions do that by configuring appropriate mode for flow controller. Signed-off-by: Joseph Lo Signed-off-by: Stephen Warren diff --git a/arch/arm/mach-tegra/flowctrl.c b/arch/arm/mach-tegra/flowctrl.c index ffaa286..a2250dd 100644 --- a/arch/arm/mach-tegra/flowctrl.c +++ b/arch/arm/mach-tegra/flowctrl.c @@ -21,6 +21,7 @@ #include #include #include +#include #include "flowctrl.h" #include "iomap.h" @@ -50,6 +51,14 @@ static void flowctrl_update(u8 offset, u32 value) readl_relaxed(addr); } +u32 flowctrl_read_cpu_csr(unsigned int cpuid) +{ + u8 offset = flowctrl_offset_cpu_csr[cpuid]; + void __iomem *addr = IO_ADDRESS(TEGRA_FLOW_CTRL_BASE) + offset; + + return readl(addr); +} + void flowctrl_write_cpu_csr(unsigned int cpuid, u32 value) { return flowctrl_update(flowctrl_offset_cpu_csr[cpuid], value); @@ -59,3 +68,41 @@ void flowctrl_write_cpu_halt(unsigned int cpuid, u32 value) { return flowctrl_update(flowctrl_offset_halt_cpu[cpuid], value); } + +void flowctrl_cpu_suspend_enter(unsigned int cpuid) +{ + unsigned int reg; + int i; + + reg = flowctrl_read_cpu_csr(cpuid); + reg &= ~TEGRA30_FLOW_CTRL_CSR_WFE_BITMAP; /* clear wfe bitmap */ + reg &= ~TEGRA30_FLOW_CTRL_CSR_WFI_BITMAP; /* clear wfi bitmap */ + reg |= FLOW_CTRL_CSR_INTR_FLAG; /* clear intr flag */ + reg |= FLOW_CTRL_CSR_EVENT_FLAG; /* clear event flag */ + reg |= TEGRA30_FLOW_CTRL_CSR_WFI_CPU0 << cpuid; /* pwr gating on wfi */ + reg |= FLOW_CTRL_CSR_ENABLE; /* pwr gating */ + flowctrl_write_cpu_csr(cpuid, reg); + + for (i = 0; i < num_possible_cpus(); i++) { + if (i == cpuid) + continue; + reg = flowctrl_read_cpu_csr(i); + reg |= FLOW_CTRL_CSR_EVENT_FLAG; + reg |= FLOW_CTRL_CSR_INTR_FLAG; + flowctrl_write_cpu_csr(i, reg); + } +} + +void flowctrl_cpu_suspend_exit(unsigned int cpuid) +{ + unsigned int reg; + + /* Disable powergating via flow controller for CPU0 */ + reg = flowctrl_read_cpu_csr(cpuid); + reg &= ~TEGRA30_FLOW_CTRL_CSR_WFE_BITMAP; /* clear wfe bitmap */ + reg &= ~TEGRA30_FLOW_CTRL_CSR_WFI_BITMAP; /* clear wfi bitmap */ + reg &= ~FLOW_CTRL_CSR_ENABLE; /* clear enable */ + reg |= FLOW_CTRL_CSR_INTR_FLAG; /* clear intr */ + reg |= FLOW_CTRL_CSR_EVENT_FLAG; /* clear event */ + flowctrl_write_cpu_csr(cpuid, reg); +} diff --git a/arch/arm/mach-tegra/flowctrl.h b/arch/arm/mach-tegra/flowctrl.h index 1942817..0798dec 100644 --- a/arch/arm/mach-tegra/flowctrl.h +++ b/arch/arm/mach-tegra/flowctrl.h @@ -34,9 +34,17 @@ #define FLOW_CTRL_HALT_CPU1_EVENTS 0x14 #define FLOW_CTRL_CPU1_CSR 0x18 +#define TEGRA30_FLOW_CTRL_CSR_WFI_CPU0 (1 << 8) +#define TEGRA30_FLOW_CTRL_CSR_WFE_BITMAP (0xF << 4) +#define TEGRA30_FLOW_CTRL_CSR_WFI_BITMAP (0xF << 8) + #ifndef __ASSEMBLY__ +u32 flowctrl_read_cpu_csr(unsigned int cpuid); void flowctrl_write_cpu_csr(unsigned int cpuid, u32 value); void flowctrl_write_cpu_halt(unsigned int cpuid, u32 value); + +void flowctrl_cpu_suspend_enter(unsigned int cpuid); +void flowctrl_cpu_suspend_exit(unsigned int cpuid); #endif #endif -- cgit v0.10.2 From d552920a02759cdc45d8507868de10ac2f5b9a18 Mon Sep 17 00:00:00 2001 From: Joseph Lo Date: Wed, 31 Oct 2012 17:41:21 +0800 Subject: ARM: tegra30: cpuidle: add powered-down state for CPU0 This is a power gating idle mode. It support power gating vdd_cpu rail after all cpu cores in "powered-down" status. For Tegra30, the CPU0 can enter this state only when all secondary CPU is offline. We need to take care and make sure whole secondary CPUs were offline and checking the CPU power gate status. After that, the CPU0 can go into "powered-down" state safely. Then shut off the CPU rail. Be aware of that, you may see the legacy power state "LP2" in the code which is exactly the same meaning of "CPU power down". Base on the work by: Scott Williams Signed-off-by: Joseph Lo Signed-off-by: Stephen Warren diff --git a/arch/arm/mach-tegra/cpuidle-tegra30.c b/arch/arm/mach-tegra/cpuidle-tegra30.c index cc48d7f..5e8cbf5 100644 --- a/arch/arm/mach-tegra/cpuidle-tegra30.c +++ b/arch/arm/mach-tegra/cpuidle-tegra30.c @@ -32,6 +32,7 @@ #include "pm.h" #include "sleep.h" +#include "tegra_cpu_car.h" #ifdef CONFIG_PM_SLEEP static int tegra30_idle_lp2(struct cpuidle_device *dev, @@ -67,6 +68,31 @@ static struct cpuidle_driver tegra_idle_driver = { static DEFINE_PER_CPU(struct cpuidle_device, tegra_idle_device); #ifdef CONFIG_PM_SLEEP +static bool tegra30_cpu_cluster_power_down(struct cpuidle_device *dev, + struct cpuidle_driver *drv, + int index) +{ + struct cpuidle_state *state = &drv->states[index]; + u32 cpu_on_time = state->exit_latency; + u32 cpu_off_time = state->target_residency - state->exit_latency; + + /* All CPUs entering LP2 is not working. + * Don't let CPU0 enter LP2 when any secondary CPU is online. + */ + if (num_online_cpus() > 1 || !tegra_cpu_rail_off_ready()) { + cpu_do_idle(); + return false; + } + + clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_ENTER, &dev->cpu); + + tegra_idle_lp2_last(cpu_on_time, cpu_off_time); + + clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_EXIT, &dev->cpu); + + return true; +} + #ifdef CONFIG_SMP static bool tegra30_cpu_core_power_down(struct cpuidle_device *dev, struct cpuidle_driver *drv, @@ -101,16 +127,22 @@ static int __cpuinit tegra30_idle_lp2(struct cpuidle_device *dev, { u32 cpu = is_smp() ? cpu_logical_map(dev->cpu) : dev->cpu; bool entered_lp2 = false; + bool last_cpu; local_fiq_disable(); - tegra_set_cpu_in_lp2(cpu); + last_cpu = tegra_set_cpu_in_lp2(cpu); cpu_pm_enter(); - if (cpu == 0) - cpu_do_idle(); - else + if (cpu == 0) { + if (last_cpu) + entered_lp2 = tegra30_cpu_cluster_power_down(dev, drv, + index); + else + cpu_do_idle(); + } else { entered_lp2 = tegra30_cpu_core_power_down(dev, drv, index); + } cpu_pm_exit(); tegra_clear_cpu_in_lp2(cpu); @@ -130,6 +162,10 @@ int __init tegra30_cpuidle_init(void) struct cpuidle_device *dev; struct cpuidle_driver *drv = &tegra_idle_driver; +#ifdef CONFIG_PM_SLEEP + tegra_tear_down_cpu = tegra30_tear_down_cpu; +#endif + ret = cpuidle_register_driver(&tegra_idle_driver); if (ret) { pr_err("CPUidle driver registration failed\n"); diff --git a/arch/arm/mach-tegra/pm.c b/arch/arm/mach-tegra/pm.c index f88595a..1460c3d 100644 --- a/arch/arm/mach-tegra/pm.c +++ b/arch/arm/mach-tegra/pm.c @@ -20,13 +20,36 @@ #include #include #include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include #include "iomap.h" #include "reset.h" +#include "flowctrl.h" +#include "sleep.h" +#include "tegra_cpu_car.h" + +#define TEGRA_POWER_CPU_PWRREQ_OE (1 << 16) /* CPU pwr req enable */ + +#define PMC_CTRL 0x0 +#define PMC_CPUPWRGOOD_TIMER 0xc8 +#define PMC_CPUPWROFF_TIMER 0xcc #ifdef CONFIG_PM_SLEEP static unsigned int g_diag_reg; static DEFINE_SPINLOCK(tegra_lp2_lock); +static void __iomem *pmc = IO_ADDRESS(TEGRA_PMC_BASE); +static struct clk *tegra_pclk; +void (*tegra_tear_down_cpu)(void); void save_cpu_arch_register(void) { @@ -42,6 +65,89 @@ void restore_cpu_arch_register(void) return; } +static void set_power_timers(unsigned long us_on, unsigned long us_off) +{ + unsigned long long ticks; + unsigned long long pclk; + unsigned long rate; + static unsigned long tegra_last_pclk; + + if (tegra_pclk == NULL) { + tegra_pclk = clk_get_sys(NULL, "pclk"); + WARN_ON(IS_ERR(tegra_pclk)); + } + + rate = clk_get_rate(tegra_pclk); + + if (WARN_ON_ONCE(rate <= 0)) + pclk = 100000000; + else + pclk = rate; + + if ((rate != tegra_last_pclk)) { + ticks = (us_on * pclk) + 999999ull; + do_div(ticks, 1000000); + writel((unsigned long)ticks, pmc + PMC_CPUPWRGOOD_TIMER); + + ticks = (us_off * pclk) + 999999ull; + do_div(ticks, 1000000); + writel((unsigned long)ticks, pmc + PMC_CPUPWROFF_TIMER); + wmb(); + } + tegra_last_pclk = pclk; +} + +/* + * restore_cpu_complex + * + * restores cpu clock setting, clears flow controller + * + * Always called on CPU 0. + */ +static void restore_cpu_complex(void) +{ + int cpu = smp_processor_id(); + + BUG_ON(cpu != 0); + +#ifdef CONFIG_SMP + cpu = cpu_logical_map(cpu); +#endif + + /* Restore the CPU clock settings */ + tegra_cpu_clock_resume(); + + flowctrl_cpu_suspend_exit(cpu); + + restore_cpu_arch_register(); +} + +/* + * suspend_cpu_complex + * + * saves pll state for use by restart_plls, prepares flow controller for + * transition to suspend state + * + * Must always be called on cpu 0. + */ +static void suspend_cpu_complex(void) +{ + int cpu = smp_processor_id(); + + BUG_ON(cpu != 0); + +#ifdef CONFIG_SMP + cpu = cpu_logical_map(cpu); +#endif + + /* Save the CPU clock settings */ + tegra_cpu_clock_suspend(); + + flowctrl_cpu_suspend_enter(cpu); + + save_cpu_arch_register(); +} + void __cpuinit tegra_clear_cpu_in_lp2(int phy_cpu_id) { u32 *cpu_in_lp2 = tegra_cpu_lp2_mask; @@ -71,4 +177,42 @@ bool __cpuinit tegra_set_cpu_in_lp2(int phy_cpu_id) spin_unlock(&tegra_lp2_lock); return last_cpu; } + +static int tegra_sleep_cpu(unsigned long v2p) +{ + /* Switch to the identity mapping. */ + cpu_switch_mm(idmap_pgd, &init_mm); + + /* Flush the TLB. */ + local_flush_tlb_all(); + + tegra_sleep_cpu_finish(v2p); + + /* should never here */ + BUG(); + + return 0; +} + +void tegra_idle_lp2_last(u32 cpu_on_time, u32 cpu_off_time) +{ + u32 mode; + + /* Only the last cpu down does the final suspend steps */ + mode = readl(pmc + PMC_CTRL); + mode |= TEGRA_POWER_CPU_PWRREQ_OE; + writel(mode, pmc + PMC_CTRL); + + set_power_timers(cpu_on_time, cpu_off_time); + + cpu_cluster_pm_enter(); + suspend_cpu_complex(); + outer_disable(); + + cpu_suspend(PHYS_OFFSET - PAGE_OFFSET, &tegra_sleep_cpu); + + outer_resume(); + restore_cpu_complex(); + cpu_cluster_pm_exit(); +} #endif diff --git a/arch/arm/mach-tegra/pm.h b/arch/arm/mach-tegra/pm.h index bcfc45f..512345c 100644 --- a/arch/arm/mach-tegra/pm.h +++ b/arch/arm/mach-tegra/pm.h @@ -27,4 +27,7 @@ void restore_cpu_arch_register(void); void tegra_clear_cpu_in_lp2(int phy_cpu_id); bool tegra_set_cpu_in_lp2(int phy_cpu_id); +void tegra_idle_lp2_last(u32 cpu_on_time, u32 cpu_off_time); +extern void (*tegra_tear_down_cpu)(void); + #endif /* _MACH_TEGRA_PM_H_ */ diff --git a/arch/arm/mach-tegra/sleep-tegra30.S b/arch/arm/mach-tegra/sleep-tegra30.S index 59984d7..562a8e7 100644 --- a/arch/arm/mach-tegra/sleep-tegra30.S +++ b/arch/arm/mach-tegra/sleep-tegra30.S @@ -124,4 +124,48 @@ ENTRY(tegra30_sleep_cpu_secondary_finish) mov r0, #1 @ never return here mov pc, r7 ENDPROC(tegra30_sleep_cpu_secondary_finish) + +/* + * tegra30_tear_down_cpu + * + * Switches the CPU to enter sleep. + */ +ENTRY(tegra30_tear_down_cpu) + mov32 r6, TEGRA_FLOW_CTRL_BASE + + b tegra30_enter_sleep +ENDPROC(tegra30_tear_down_cpu) + +/* + * tegra30_enter_sleep + * + * uses flow controller to enter sleep state + * executes from IRAM with SDRAM in selfrefresh when target state is LP0 or LP1 + * executes from SDRAM with target state is LP2 + * r6 = TEGRA_FLOW_CTRL_BASE + */ +tegra30_enter_sleep: + cpu_id r1 + + cpu_to_csr_reg r2, r1 + ldr r0, [r6, r2] + orr r0, r0, #FLOW_CTRL_CSR_INTR_FLAG | FLOW_CTRL_CSR_EVENT_FLAG + orr r0, r0, #FLOW_CTRL_CSR_ENABLE + str r0, [r6, r2] + + mov r0, #FLOW_CTRL_WAIT_FOR_INTERRUPT + orr r0, r0, #FLOW_CTRL_HALT_CPU_IRQ | FLOW_CTRL_HALT_CPU_FIQ + cpu_to_halt_reg r2, r1 + str r0, [r6, r2] + dsb + ldr r0, [r6, r2] /* memory barrier */ + +halted: + isb + dsb + wfi /* CPU should be power gated here */ + + /* !!!FIXME!!! Implement halt failure handler */ + b halted + #endif diff --git a/arch/arm/mach-tegra/sleep.S b/arch/arm/mach-tegra/sleep.S index 91548a7..88f4de9 100644 --- a/arch/arm/mach-tegra/sleep.S +++ b/arch/arm/mach-tegra/sleep.S @@ -25,6 +25,7 @@ #include #include +#include #include #include "iomap.h" @@ -59,4 +60,45 @@ ENTRY(tegra_disable_clean_inv_dcache) ldmfd sp!, {r0, r4-r5, r7, r9-r11, pc} ENDPROC(tegra_disable_clean_inv_dcache) +/* + * tegra_sleep_cpu_finish(unsigned long v2p) + * + * enters suspend in LP2 by turning off the mmu and jumping to + * tegra?_tear_down_cpu + */ +ENTRY(tegra_sleep_cpu_finish) + /* Flush and disable the L1 data cache */ + bl tegra_disable_clean_inv_dcache + + mov32 r6, tegra_tear_down_cpu + ldr r1, [r6] + add r1, r1, r0 + + mov32 r3, tegra_shut_off_mmu + add r3, r3, r0 + mov r0, r1 + + mov pc, r3 +ENDPROC(tegra_sleep_cpu_finish) + +/* + * tegra_shut_off_mmu + * + * r0 = physical address to jump to with mmu off + * + * called with VA=PA mapping + * turns off MMU, icache, dcache and branch prediction + */ + .align L1_CACHE_SHIFT + .pushsection .idmap.text, "ax" +ENTRY(tegra_shut_off_mmu) + mrc p15, 0, r3, c1, c0, 0 + movw r2, #CR_I | CR_Z | CR_C | CR_M + bic r3, r3, r2 + dsb + mcr p15, 0, r3, c1, c0, 0 + isb + mov pc, r0 +ENDPROC(tegra_shut_off_mmu) + .popsection #endif diff --git a/arch/arm/mach-tegra/sleep.h b/arch/arm/mach-tegra/sleep.h index bacf549..6e1b949 100644 --- a/arch/arm/mach-tegra/sleep.h +++ b/arch/arm/mach-tegra/sleep.h @@ -73,6 +73,7 @@ .endm #else void tegra_resume(void); +int tegra_sleep_cpu_finish(unsigned long); #ifdef CONFIG_HOTPLUG_CPU void tegra20_hotplug_init(void); @@ -83,6 +84,7 @@ static inline void tegra30_hotplug_init(void) {} #endif int tegra30_sleep_cpu_secondary_finish(unsigned long); +void tegra30_tear_down_cpu(void); #endif #endif -- cgit v0.10.2 From 29a0e7beab8e05be53d5b9c050253a4dc417041e Mon Sep 17 00:00:00 2001 From: Joseph Lo Date: Tue, 13 Nov 2012 10:04:48 +0800 Subject: ARM: tegra: retain L2 content over CPU suspend/resume The L2 RAM is in different power domain from the CPU cluster. So the L2 content can be retained over CPU suspend/resume. To do that, we need to disable L2 after the MMU is disabled, and enable L2 before the MMU is enabled. But the L2 controller is in the same power domain with the CPU cluster. We need to restore it's settings and re-enable it after the power be resumed. Signed-off-by: Joseph Lo Acked-by: Peter De Schrijver Signed-off-by: Stephen Warren diff --git a/arch/arm/mach-tegra/common.c b/arch/arm/mach-tegra/common.c index 203a8b9..11a74db 100644 --- a/arch/arm/mach-tegra/common.c +++ b/arch/arm/mach-tegra/common.c @@ -36,6 +36,7 @@ #include "pmc.h" #include "apbio.h" #include "sleep.h" +#include "pm.h" /* * Storage for debug-macro.S's state. @@ -117,6 +118,7 @@ static __initdata struct tegra_clk_init_table tegra30_clk_init_table[] = { static void __init tegra_init_cache(void) { #ifdef CONFIG_CACHE_L2X0 + int ret; void __iomem *p = IO_ADDRESS(TEGRA_ARM_PERIF_BASE) + 0x3000; u32 aux_ctrl, cache_type; @@ -124,7 +126,9 @@ static void __init tegra_init_cache(void) aux_ctrl = (cache_type & 0x700) << (17-8); aux_ctrl |= 0x7C400001; - l2x0_of_init(aux_ctrl, 0x8200c3fe); + ret = l2x0_of_init(aux_ctrl, 0x8200c3fe); + if (!ret) + l2x0_saved_regs_addr = virt_to_phys(&l2x0_saved_regs); #endif } diff --git a/arch/arm/mach-tegra/headsmp.S b/arch/arm/mach-tegra/headsmp.S index 82dc84b..4a317fa 100644 --- a/arch/arm/mach-tegra/headsmp.S +++ b/arch/arm/mach-tegra/headsmp.S @@ -2,6 +2,8 @@ #include #include +#include +#include #include "flowctrl.h" #include "iomap.h" @@ -113,10 +115,19 @@ ENTRY(tegra_resume) str r1, [r0] #endif + /* L2 cache resume & re-enable */ + l2_cache_resume r0, r1, r2, l2x0_saved_regs_addr + b cpu_resume ENDPROC(tegra_resume) #endif +#ifdef CONFIG_CACHE_L2X0 + .globl l2x0_saved_regs_addr +l2x0_saved_regs_addr: + .long 0 +#endif + .align L1_CACHE_SHIFT ENTRY(__tegra_cpu_reset_handler_start) diff --git a/arch/arm/mach-tegra/pm.c b/arch/arm/mach-tegra/pm.c index 1460c3d..1b11707 100644 --- a/arch/arm/mach-tegra/pm.c +++ b/arch/arm/mach-tegra/pm.c @@ -207,11 +207,9 @@ void tegra_idle_lp2_last(u32 cpu_on_time, u32 cpu_off_time) cpu_cluster_pm_enter(); suspend_cpu_complex(); - outer_disable(); cpu_suspend(PHYS_OFFSET - PAGE_OFFSET, &tegra_sleep_cpu); - outer_resume(); restore_cpu_complex(); cpu_cluster_pm_exit(); } diff --git a/arch/arm/mach-tegra/pm.h b/arch/arm/mach-tegra/pm.h index 512345c..787335c 100644 --- a/arch/arm/mach-tegra/pm.h +++ b/arch/arm/mach-tegra/pm.h @@ -21,6 +21,8 @@ #ifndef _MACH_TEGRA_PM_H_ #define _MACH_TEGRA_PM_H_ +extern unsigned long l2x0_saved_regs_addr; + void save_cpu_arch_register(void); void restore_cpu_arch_register(void); diff --git a/arch/arm/mach-tegra/sleep.S b/arch/arm/mach-tegra/sleep.S index 88f4de9..26afa7c 100644 --- a/arch/arm/mach-tegra/sleep.S +++ b/arch/arm/mach-tegra/sleep.S @@ -27,6 +27,7 @@ #include #include #include +#include #include "iomap.h" @@ -98,6 +99,12 @@ ENTRY(tegra_shut_off_mmu) dsb mcr p15, 0, r3, c1, c0, 0 isb +#ifdef CONFIG_CACHE_L2X0 + /* Disable L2 cache */ + mov32 r4, TEGRA_ARM_PERIF_BASE + 0x3000 + mov r5, #0 + str r5, [r4, #L2X0_CTRL] +#endif mov pc, r0 ENDPROC(tegra_shut_off_mmu) .popsection diff --git a/arch/arm/mach-tegra/sleep.h b/arch/arm/mach-tegra/sleep.h index 6e1b949..9821ee7 100644 --- a/arch/arm/mach-tegra/sleep.h +++ b/arch/arm/mach-tegra/sleep.h @@ -71,6 +71,38 @@ str \tmp2, [\tmp1] @ invalidate SCU tags for CPU dsb .endm + +/* Macro to resume & re-enable L2 cache */ +#ifndef L2X0_CTRL_EN +#define L2X0_CTRL_EN 1 +#endif + +#ifdef CONFIG_CACHE_L2X0 +.macro l2_cache_resume, tmp1, tmp2, tmp3, phys_l2x0_saved_regs + adr \tmp1, \phys_l2x0_saved_regs + ldr \tmp1, [\tmp1] + ldr \tmp2, [\tmp1, #L2X0_R_PHY_BASE] + ldr \tmp3, [\tmp2, #L2X0_CTRL] + tst \tmp3, #L2X0_CTRL_EN + bne exit_l2_resume + ldr \tmp3, [\tmp1, #L2X0_R_TAG_LATENCY] + str \tmp3, [\tmp2, #L2X0_TAG_LATENCY_CTRL] + ldr \tmp3, [\tmp1, #L2X0_R_DATA_LATENCY] + str \tmp3, [\tmp2, #L2X0_DATA_LATENCY_CTRL] + ldr \tmp3, [\tmp1, #L2X0_R_PREFETCH_CTRL] + str \tmp3, [\tmp2, #L2X0_PREFETCH_CTRL] + ldr \tmp3, [\tmp1, #L2X0_R_PWR_CTRL] + str \tmp3, [\tmp2, #L2X0_POWER_CTRL] + ldr \tmp3, [\tmp1, #L2X0_R_AUX_CTRL] + str \tmp3, [\tmp2, #L2X0_AUX_CTRL] + mov \tmp3, #L2X0_CTRL_EN + str \tmp3, [\tmp2, #L2X0_CTRL] +exit_l2_resume: +.endm +#else /* CONFIG_CACHE_L2X0 */ +.macro l2_cache_resume, tmp1, tmp2, tmp3, phys_l2x0_saved_regs +.endm +#endif /* CONFIG_CACHE_L2X0 */ #else void tegra_resume(void); int tegra_sleep_cpu_finish(unsigned long); -- cgit v0.10.2 From 6254f95b7c22264622b6bd6515b609d9cf88393f Mon Sep 17 00:00:00 2001 From: Stephen Warren Date: Fri, 21 Sep 2012 16:55:00 +0800 Subject: ARM: tegra: defconfig updates New options enabled: * BRCMFMAC: wlan driver, enable as module. * MTD, MTD_CHAR, MTD_M25P80, SPI_TEGRA20_SLINK, CONFIG_SPI_TEGRA20_SFLASH to enable serial flash on Cardhu and TrimSlice. * PWM/backlight features for use with tegradrm. * tegradrm; Tegra's new display driver. * CMA, so that tegradrm can allocate large buffers. * SquashFS, which is used as the root filesystem on boards based on the Tamonten processor module. Signed-off-by: Wei Ni Signed-off-by: Laxman Dewangan Signed-off-by: Thierry Reding Signed-off-by: Stephen Warren diff --git a/arch/arm/configs/tegra_defconfig b/arch/arm/configs/tegra_defconfig index e2184f6..a7827fd 100644 --- a/arch/arm/configs/tegra_defconfig +++ b/arch/arm/configs/tegra_defconfig @@ -80,6 +80,10 @@ CONFIG_RFKILL_GPIO=y CONFIG_DEVTMPFS=y CONFIG_DEVTMPFS_MOUNT=y # CONFIG_FIRMWARE_IN_KERNEL is not set +CONFIG_CMA=y +CONFIG_MTD=y +CONFIG_MTD_CHAR=y +CONFIG_MTD_M25P80=y CONFIG_PROC_DEVICETREE=y CONFIG_BLK_DEV_LOOP=y CONFIG_AD525X_DPOT=y @@ -98,12 +102,12 @@ CONFIG_USB_PEGASUS=y CONFIG_USB_USBNET=y CONFIG_USB_NET_SMSC75XX=y CONFIG_USB_NET_SMSC95XX=y +CONFIG_BRCMFMAC=m CONFIG_RT2X00=y CONFIG_RT2800USB=m CONFIG_INPUT_EVDEV=y CONFIG_INPUT_MISC=y CONFIG_INPUT_MPU3050=y -# CONFIG_VT is not set # CONFIG_LEGACY_PTYS is not set # CONFIG_DEVKMEM is not set CONFIG_SERIAL_8250=y @@ -116,7 +120,8 @@ CONFIG_I2C_MUX=y CONFIG_I2C_MUX_PINCTRL=y CONFIG_I2C_TEGRA=y CONFIG_SPI=y -CONFIG_SPI_TEGRA=y +CONFIG_SPI_TEGRA20_SFLASH=y +CONFIG_SPI_TEGRA20_SLINK=y CONFIG_GPIO_PCA953X_IRQ=y CONFIG_GPIO_TPS6586X=y CONFIG_GPIO_TPS65910=y @@ -138,6 +143,15 @@ CONFIG_MEDIA_SUPPORT=y CONFIG_MEDIA_CAMERA_SUPPORT=y CONFIG_MEDIA_USB_SUPPORT=y CONFIG_USB_VIDEO_CLASS=m +CONFIG_DRM=y +CONFIG_DRM_TEGRA=y +CONFIG_BACKLIGHT_LCD_SUPPORT=y +# CONFIG_LCD_CLASS_DEVICE is not set +CONFIG_BACKLIGHT_CLASS_DEVICE=y +# CONFIG_BACKLIGHT_GENERIC is not set +CONFIG_BACKLIGHT_PWM=y +CONFIG_FRAMEBUFFER_CONSOLE=y +CONFIG_LOGO=y CONFIG_SOUND=y CONFIG_SND=y # CONFIG_SND_SUPPORT_OLD_API is not set @@ -205,6 +219,9 @@ CONFIG_EXT4_FS=y CONFIG_VFAT_FS=y CONFIG_TMPFS=y CONFIG_TMPFS_POSIX_ACL=y +CONFIG_SQUASHFS=y +CONFIG_SQUASHFS_LZO=y +CONFIG_SQUASHFS_XZ=y CONFIG_NFS_FS=y CONFIG_ROOT_NFS=y CONFIG_NLS_CODEPAGE_437=y -- cgit v0.10.2 From 3ab3a350200c14350220fffde893f3afb640fd25 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Ga=C3=ABtan=20Carlier?= Date: Wed, 5 Sep 2012 13:06:15 +0200 Subject: ARM : i.MX27 : split code for allocation of ressources of camera and eMMA MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This is to prepare addition of m2m-emmapp driver otherwise IMX_HAVE_PLATFORM_MX2_CAMERA must be declared even if only Post-Processor is needed. IMX_HAVE_PLATFORM_MX2_EMMA define has been added. Changes since v1: - Add "select IMX_HAVE_PLATFORM_MX2_EMMA" for MACH_IMX27_VISSTRIM_M10 platform due to pending patch in linux-media tree that will call imx27_add_mx2_emmaprp(). Signed-off-by: Gaëtan Carlier Acked-by: Javier Martin Signed-off-by: Sascha Hauer diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig index f1bf610..01a2597 100644 --- a/arch/arm/mach-imx/Kconfig +++ b/arch/arm/mach-imx/Kconfig @@ -394,6 +394,7 @@ config MACH_IMX27_VISSTRIM_M10 select IMX_HAVE_PLATFORM_IMX_SSI select IMX_HAVE_PLATFORM_IMX_UART select IMX_HAVE_PLATFORM_MX2_CAMERA + select IMX_HAVE_PLATFORM_MX2_EMMA select IMX_HAVE_PLATFORM_MXC_EHCI select IMX_HAVE_PLATFORM_MXC_MMC select LEDS_GPIO_REGISTER diff --git a/arch/arm/mach-imx/devices-imx27.h b/arch/arm/mach-imx/devices-imx27.h index 8a1ad79..1309625 100644 --- a/arch/arm/mach-imx/devices-imx27.h +++ b/arch/arm/mach-imx/devices-imx27.h @@ -53,8 +53,10 @@ extern const struct imx_imx_uart_1irq_data imx27_imx_uart_data[]; extern const struct imx_mx2_camera_data imx27_mx2_camera_data; #define imx27_add_mx2_camera(pdata) \ imx_add_mx2_camera(&imx27_mx2_camera_data, pdata) + +extern const struct imx_mx2_emma_data imx27_mx2_emmaprp_data; #define imx27_add_mx2_emmaprp() \ - imx_add_mx2_emmaprp(&imx27_mx2_camera_data) + imx_add_mx2_emmaprp(&imx27_mx2_emmaprp_data) extern const struct imx_mxc_ehci_data imx27_mxc_ehci_otg_data; #define imx27_add_mxc_ehci_otg(pdata) \ diff --git a/arch/arm/mach-imx/devices/Kconfig b/arch/arm/mach-imx/devices/Kconfig index a35d984..9a8f1ca 100644 --- a/arch/arm/mach-imx/devices/Kconfig +++ b/arch/arm/mach-imx/devices/Kconfig @@ -56,6 +56,9 @@ config IMX_HAVE_PLATFORM_MX1_CAMERA config IMX_HAVE_PLATFORM_MX2_CAMERA bool +config IMX_HAVE_PLATFORM_MX2_EMMA + bool + config IMX_HAVE_PLATFORM_MXC_EHCI bool diff --git a/arch/arm/mach-imx/devices/Makefile b/arch/arm/mach-imx/devices/Makefile index 2abe2a5..6acf37e 100644 --- a/arch/arm/mach-imx/devices/Makefile +++ b/arch/arm/mach-imx/devices/Makefile @@ -30,3 +30,4 @@ obj-$(CONFIG_IMX_HAVE_PLATFORM_MXC_W1) += platform-mxc_w1.o obj-$(CONFIG_IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX) += platform-sdhci-esdhc-imx.o obj-$(CONFIG_IMX_HAVE_PLATFORM_SPI_IMX) += platform-spi_imx.o obj-$(CONFIG_IMX_HAVE_PLATFORM_AHCI) += platform-ahci-imx.o +obj-$(CONFIG_IMX_HAVE_PLATFORM_MX2_EMMA) += platform-mx2-emma.o diff --git a/arch/arm/mach-imx/devices/devices-common.h b/arch/arm/mach-imx/devices/devices-common.h index e4b790b..6277baf 100644 --- a/arch/arm/mach-imx/devices/devices-common.h +++ b/arch/arm/mach-imx/devices/devices-common.h @@ -232,8 +232,15 @@ struct imx_mx2_camera_data { struct platform_device *__init imx_add_mx2_camera( const struct imx_mx2_camera_data *data, const struct mx2_camera_platform_data *pdata); + + +struct imx_mx2_emma_data { + resource_size_t iobase; + resource_size_t iosize; + resource_size_t irq; +}; struct platform_device *__init imx_add_mx2_emmaprp( - const struct imx_mx2_camera_data *data); + const struct imx_mx2_emma_data *data); #include struct imx_mxc_ehci_data { diff --git a/arch/arm/mach-imx/devices/platform-mx2-camera.c b/arch/arm/mach-imx/devices/platform-mx2-camera.c index f491016..b53e1f3 100644 --- a/arch/arm/mach-imx/devices/platform-mx2-camera.c +++ b/arch/arm/mach-imx/devices/platform-mx2-camera.c @@ -65,20 +65,3 @@ struct platform_device *__init imx_add_mx2_camera( pdata, sizeof(*pdata), DMA_BIT_MASK(32)); } -struct platform_device *__init imx_add_mx2_emmaprp( - const struct imx_mx2_camera_data *data) -{ - struct resource res[] = { - { - .start = data->iobaseemmaprp, - .end = data->iobaseemmaprp + data->iosizeemmaprp - 1, - .flags = IORESOURCE_MEM, - }, { - .start = data->irqemmaprp, - .end = data->irqemmaprp, - .flags = IORESOURCE_IRQ, - }, - }; - return imx_add_platform_device_dmamask("m2m-emmaprp", 0, - res, 2, NULL, 0, DMA_BIT_MASK(32)); -} diff --git a/arch/arm/plat-mxc/devices/platform-mx2-emma.c b/arch/arm/plat-mxc/devices/platform-mx2-emma.c new file mode 100644 index 0000000..508404d --- /dev/null +++ b/arch/arm/plat-mxc/devices/platform-mx2-emma.c @@ -0,0 +1,40 @@ +/* + * Copyright (C) 2010 Pengutronix + * Uwe Kleine-Koenig + * + * This program is free software; you can redistribute it and/or modify it under + * the terms of the GNU General Public License version 2 as published by the + * Free Software Foundation. + */ +#include +#include + +#define imx_mx2_emmaprp_data_entry_single(soc) \ + { \ + .iobase = soc ## _EMMAPRP_BASE_ADDR, \ + .iosize = SZ_32, \ + .irq = soc ## _INT_EMMAPRP, \ + } + +#ifdef CONFIG_SOC_IMX27 +const struct imx_mx2_emma_data imx27_mx2_emmaprp_data __initconst = + imx_mx2_emmaprp_data_entry_single(MX27); +#endif /* ifdef CONFIG_SOC_IMX27 */ + +struct platform_device *__init imx_add_mx2_emmaprp( + const struct imx_mx2_emma_data *data) +{ + struct resource res[] = { + { + .start = data->iobase, + .end = data->iobase + data->iosize - 1, + .flags = IORESOURCE_MEM, + }, { + .start = data->irq, + .end = data->irq, + .flags = IORESOURCE_IRQ, + }, + }; + return imx_add_platform_device_dmamask("m2m-emmaprp", 0, + res, 2, NULL, 0, DMA_BIT_MASK(32)); +} -- cgit v0.10.2 From eebdb17287443408c979dbc1cee594f6b770bc68 Mon Sep 17 00:00:00 2001 From: Roland Stigge Date: Thu, 18 Oct 2012 18:06:10 +0200 Subject: ARM: mach-imx: Support for DryIce RTC in i.MX53 This patch enables support for i.MX53 in addition to i.MX25 by providing a dummy clock on i.MX53 since this one doesn't have a separate clock for internal RTC but the driver requests one. Signed-off-by: Roland Stigge Signed-off-by: Sascha Hauer diff --git a/arch/arm/mach-imx/clk-imx51-imx53.c b/arch/arm/mach-imx/clk-imx51-imx53.c index abb71f6..6cb9795 100644 --- a/arch/arm/mach-imx/clk-imx51-imx53.c +++ b/arch/arm/mach-imx/clk-imx51-imx53.c @@ -466,6 +466,7 @@ int __init mx53_clocks_init(unsigned long rate_ckil, unsigned long rate_osc, clk_register_clkdev(clk[can1_serial_gate], "per", "53fc8000.can"); clk_register_clkdev(clk[can2_ipg_gate], "ipg", "53fcc000.can"); clk_register_clkdev(clk[can2_serial_gate], "per", "53fcc000.can"); + clk_register_clkdev(clk[dummy], NULL, "53fa4000.rtc"); /* set SDHC root clock to 200MHZ*/ clk_set_rate(clk[esdhc_a_podf], 200000000); -- cgit v0.10.2 From 48b797adc02cdfc079930f2dfa3195b13ef7c0df Mon Sep 17 00:00:00 2001 From: Roland Stigge Date: Thu, 25 Oct 2012 13:28:33 +0200 Subject: watchdog: Support imx watchdog on SOC_IMX53 This patch fixes watchdog support after devicetree switch for imx53 Signed-off-by: Roland Stigge Signed-off-by: Sascha Hauer diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig index 01a2597..4e24b8c 100644 --- a/arch/arm/mach-imx/Kconfig +++ b/arch/arm/mach-imx/Kconfig @@ -821,6 +821,7 @@ config SOC_IMX53 select ARCH_MX5 select ARCH_MX53 select HAVE_CAN_FLEXCAN if CAN + select IMX_HAVE_PLATFORM_IMX2_WDT select PINCTRL select PINCTRL_IMX53 select SOC_IMX5 -- cgit v0.10.2 From 9b49e170c0bafb7fe9f04ae41fa3efd6aa2c2f09 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Wed, 26 Sep 2012 09:07:41 -0300 Subject: ARM: dts: imx27-3ds: Remove local watchdog inclusion imx27.dtsi already register the watchdog, so no need to do it in the board dts file. Signed-off-by: Fabio Estevam Signed-off-by: Sascha Hauer diff --git a/arch/arm/boot/dts/imx27-3ds.dts b/arch/arm/boot/dts/imx27-3ds.dts index 0a8978a..b01c0d7 100644 --- a/arch/arm/boot/dts/imx27-3ds.dts +++ b/arch/arm/boot/dts/imx27-3ds.dts @@ -23,10 +23,6 @@ soc { aipi@10000000 { /* aipi */ - wdog@10002000 { - status = "okay"; - }; - uart1: serial@1000a000 { fsl,uart-has-rtscts; status = "okay"; -- cgit v0.10.2 From 4ea9e857eec6474a7fa1a0ded1366f202d45dbe5 Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Wed, 31 Oct 2012 08:25:08 +0100 Subject: ARM i.MX27: Fix low reference clock path The i.MX27 clock tree can either be driven from a 26MHz oscillator or from a 32768Hz oscillator. The latter was not properly implemented, the mux between these two pathes was missing. Add this mux and while at it rename the 'prem' (premultiplier) clk to 'fpm' (Frequency Pre-Multiplier) to better match the datasheet. Signed-off-by: Sascha Hauer diff --git a/arch/arm/mach-imx/clk-imx27.c b/arch/arm/mach-imx/clk-imx27.c index 585ab25..34f4aff 100644 --- a/arch/arm/mach-imx/clk-imx27.c +++ b/arch/arm/mach-imx/clk-imx27.c @@ -51,8 +51,10 @@ static const char *vpu_sel_clks[] = { "spll", "mpll_main2", }; static const char *cpu_sel_clks[] = { "mpll_main2", "mpll", }; +static const char *mpll_sel_clks[] = { "fpm", "mpll_osc_sel", }; +static const char *mpll_osc_sel_clks[] = { "ckih", "ckih_div1p5", }; static const char *clko_sel_clks[] = { - "ckil", "prem", "ckih", "ckih", + "ckil", "fpm", "ckih", "ckih", "ckih", "mpll", "spll", "cpu_div", "ahb", "ipg", "per1_div", "per2_div", "per3_div", "per4_div", "ssi1_div", "ssi2_div", @@ -79,7 +81,8 @@ enum mx27_clks { vpu_ahb_gate, fec_ahb_gate, emma_ahb_gate, emi_ahb_gate, dma_ahb_gate, csi_ahb_gate, brom_ahb_gate, ata_ahb_gate, wdog_ipg_gate, usb_ipg_gate, uart6_ipg_gate, uart5_ipg_gate, uart4_ipg_gate, uart3_ipg_gate, - uart2_ipg_gate, uart1_ipg_gate, clk_max + uart2_ipg_gate, uart1_ipg_gate, ckih_div1p5, fpm, mpll_osc_sel, + mpll_sel, clk_max }; static struct clk *clk[clk_max]; @@ -91,7 +94,15 @@ int __init mx27_clocks_init(unsigned long fref) clk[dummy] = imx_clk_fixed("dummy", 0); clk[ckih] = imx_clk_fixed("ckih", fref); clk[ckil] = imx_clk_fixed("ckil", 32768); - clk[mpll] = imx_clk_pllv1("mpll", "ckih", CCM_MPCTL0); + clk[fpm] = imx_clk_fixed_factor("fpm", "ckil", 1024, 1); + clk[ckih_div1p5] = imx_clk_fixed_factor("ckih_div1p5", "ckih", 2, 3); + + clk[mpll_osc_sel] = imx_clk_mux("mpll_osc_sel", CCM_CSCR, 4, 1, + mpll_osc_sel_clks, + ARRAY_SIZE(mpll_osc_sel_clks)); + clk[mpll_sel] = imx_clk_mux("mpll_sel", CCM_CSCR, 16, 1, mpll_sel_clks, + ARRAY_SIZE(mpll_sel_clks)); + clk[mpll] = imx_clk_pllv1("mpll", "mpll_sel", CCM_MPCTL0); clk[spll] = imx_clk_pllv1("spll", "ckih", CCM_SPCTL0); clk[mpll_main2] = imx_clk_fixed_factor("mpll_main2", "mpll", 2, 3); -- cgit v0.10.2 From 6efc782362b4e869bfd71d801020c8641abdbd1f Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Tue, 30 Oct 2012 10:03:25 -0200 Subject: ARM: clk-imx27: Add missing clock for mx2-camera During the clock conversion for mx27 the "per4_gate" clock was missed to get registered as a dependency of mx2-camera driver. In the old mx27 clock driver we used to have: DEFINE_CLOCK1(csi_clk, 0, NULL, 0, parent, &csi_clk1, &per4_clk); ,so does the same in the new clock driver Signed-off-by: Fabio Estevam Acked-by: Sascha Hauer Signed-off-by: Sascha Hauer diff --git a/arch/arm/mach-imx/clk-imx27.c b/arch/arm/mach-imx/clk-imx27.c index 34f4aff..4c1d1e4 100644 --- a/arch/arm/mach-imx/clk-imx27.c +++ b/arch/arm/mach-imx/clk-imx27.c @@ -235,6 +235,7 @@ int __init mx27_clocks_init(unsigned long fref) clk_register_clkdev(clk[lcdc_ipg_gate], "ipg", "imx21-fb.0"); clk_register_clkdev(clk[lcdc_ahb_gate], "ahb", "imx21-fb.0"); clk_register_clkdev(clk[csi_ahb_gate], "ahb", "imx27-camera.0"); + clk_register_clkdev(clk[per4_gate], "per", "imx27-camera.0"); clk_register_clkdev(clk[usb_div], "per", "fsl-usb2-udc"); clk_register_clkdev(clk[usb_ipg_gate], "ipg", "fsl-usb2-udc"); clk_register_clkdev(clk[usb_ahb_gate], "ahb", "fsl-usb2-udc"); -- cgit v0.10.2 From 376aaac1837af8ed6c1014958396322c44306cbf Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Tue, 30 Oct 2012 10:03:26 -0200 Subject: mx2_camera: Fix regression caused by clock conversion MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Since mx27 transitioned to the commmon clock framework in 3.5, the correct way to acquire the csi clock is to get csi_ahb and csi_per clocks separately. By not doing so the camera sensor does not probe correctly: soc-camera-pdrv soc-camera-pdrv.0: Probing soc-camera-pdrv.0 mx2-camera mx2-camera.0: Camera driver attached to camera 0 ov2640 0-0030: Product ID error fb:fb mx2-camera mx2-camera.0: Camera driver detached from camera 0 mx2-camera mx2-camera.0: MX2 Camera (CSI) driver probed, clock frequency: 66500000 Adapt the mx2_camera driver to the new clock framework and make it functional again. Tested-by: Gaëtan Carlier Tested-by: Javier Martin Signed-off-by: Fabio Estevam Signed-off-by: Sascha Hauer Acked-by: Mauro Carvalho Chehab diff --git a/drivers/media/platform/soc_camera/mx2_camera.c b/drivers/media/platform/soc_camera/mx2_camera.c index e575ae8..558f6a3 100644 --- a/drivers/media/platform/soc_camera/mx2_camera.c +++ b/drivers/media/platform/soc_camera/mx2_camera.c @@ -278,7 +278,8 @@ struct mx2_camera_dev { struct device *dev; struct soc_camera_host soc_host; struct soc_camera_device *icd; - struct clk *clk_csi, *clk_emma_ahb, *clk_emma_ipg; + struct clk *clk_emma_ahb, *clk_emma_ipg; + struct clk *clk_csi_ahb, *clk_csi_per; void __iomem *base_csi, *base_emma; @@ -464,7 +465,8 @@ static void mx2_camera_deactivate(struct mx2_camera_dev *pcdev) { unsigned long flags; - clk_disable_unprepare(pcdev->clk_csi); + clk_disable_unprepare(pcdev->clk_csi_ahb); + clk_disable_unprepare(pcdev->clk_csi_per); writel(0, pcdev->base_csi + CSICR1); if (is_imx27_camera(pcdev)) { writel(0, pcdev->base_emma + PRP_CNTL); @@ -492,10 +494,14 @@ static int mx2_camera_add_device(struct soc_camera_device *icd) if (pcdev->icd) return -EBUSY; - ret = clk_prepare_enable(pcdev->clk_csi); + ret = clk_prepare_enable(pcdev->clk_csi_ahb); if (ret < 0) return ret; + ret = clk_prepare_enable(pcdev->clk_csi_per); + if (ret < 0) + goto exit_csi_ahb; + csicr1 = CSICR1_MCLKEN; if (is_imx27_camera(pcdev)) @@ -512,6 +518,11 @@ static int mx2_camera_add_device(struct soc_camera_device *icd) icd->devnum); return 0; + +exit_csi_ahb: + clk_disable_unprepare(pcdev->clk_csi_ahb); + + return ret; } static void mx2_camera_remove_device(struct soc_camera_device *icd) @@ -1772,10 +1783,17 @@ static int __devinit mx2_camera_probe(struct platform_device *pdev) break; } - pcdev->clk_csi = devm_clk_get(&pdev->dev, "ahb"); - if (IS_ERR(pcdev->clk_csi)) { - dev_err(&pdev->dev, "Could not get csi clock\n"); - err = PTR_ERR(pcdev->clk_csi); + pcdev->clk_csi_ahb = devm_clk_get(&pdev->dev, "ahb"); + if (IS_ERR(pcdev->clk_csi_ahb)) { + dev_err(&pdev->dev, "Could not get csi ahb clock\n"); + err = PTR_ERR(pcdev->clk_csi_ahb); + goto exit; + } + + pcdev->clk_csi_per = devm_clk_get(&pdev->dev, "per"); + if (IS_ERR(pcdev->clk_csi_per)) { + dev_err(&pdev->dev, "Could not get csi per clock\n"); + err = PTR_ERR(pcdev->clk_csi_per); goto exit; } @@ -1785,12 +1803,13 @@ static int __devinit mx2_camera_probe(struct platform_device *pdev) pcdev->platform_flags = pcdev->pdata->flags; - rate = clk_round_rate(pcdev->clk_csi, pcdev->pdata->clk * 2); + rate = clk_round_rate(pcdev->clk_csi_per, + pcdev->pdata->clk * 2); if (rate <= 0) { err = -ENODEV; goto exit; } - err = clk_set_rate(pcdev->clk_csi, rate); + err = clk_set_rate(pcdev->clk_csi_per, rate); if (err < 0) goto exit; } @@ -1848,7 +1867,7 @@ static int __devinit mx2_camera_probe(struct platform_device *pdev) goto exit_free_emma; dev_info(&pdev->dev, "MX2 Camera (CSI) driver probed, clock frequency: %ld\n", - clk_get_rate(pcdev->clk_csi)); + clk_get_rate(pcdev->clk_csi_per)); return 0; -- cgit v0.10.2 From a4dfccf8a8044fe2ed38b96e0546eaf8e669eb5f Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Mon, 12 Nov 2012 15:39:55 +0100 Subject: ARM i.MX51: setup MIPI during startup The MIPI interface has to be initialized for proper IPU support. The MIPI officially is not supported, but still needs initialization. This patch adds this to the SoC startup as all it does is poking some magic values into registers for which we do not have documentation. Signed-off-by: Sascha Hauer Acked-by: Shawn Guo diff --git a/arch/arm/mach-imx/mm-imx5.c b/arch/arm/mach-imx/mm-imx5.c index f92caf1..79d71cf 100644 --- a/arch/arm/mach-imx/mm-imx5.c +++ b/arch/arm/mach-imx/mm-imx5.c @@ -81,8 +81,28 @@ void __init imx50_init_early(void) mxc_arch_reset_init(MX50_IO_ADDRESS(MX50_WDOG_BASE_ADDR)); } +/* + * The MIPI HSC unit has been removed from the i.MX51 Reference Manual by + * the Freescale marketing division. However this did not remove the + * hardware from the chip which still needs to be configured for proper + * IPU support. + */ +static void __init imx51_ipu_mipi_setup(void) +{ + void __iomem *hsc_addr; + hsc_addr = MX51_IO_ADDRESS(MX51_MIPI_HSC_BASE_ADDR); + + /* setup MIPI module to legacy mode */ + __raw_writel(0xf00, hsc_addr); + + /* CSI mode: reserved; DI control mode: legacy (from Freescale BSP) */ + __raw_writel(__raw_readl(hsc_addr + 0x800) | 0x30ff, + hsc_addr + 0x800); +} + void __init imx51_init_early(void) { + imx51_ipu_mipi_setup(); mxc_set_cpu_type(MXC_CPU_MX51); mxc_iomux_v3_init(MX51_IO_ADDRESS(MX51_IOMUXC_BASE_ADDR)); mxc_arch_reset_init(MX51_IO_ADDRESS(MX51_WDOG1_BASE_ADDR)); -- cgit v0.10.2 From 80be8aa31e97fc2eae4e5856b2e1aa6b2eb1954f Mon Sep 17 00:00:00 2001 From: Steffen Trumtrar Date: Mon, 13 Aug 2012 09:32:19 +0200 Subject: ARM i.MX6: fix ldb_di_sel mux This adds the mmdc_ch1 as a possible parent for the ldb_di clk. According to the datasheet, this clock can be selected at this mux. Signed-off-by: Steffen Trumtrar Acked-by: Shawn Guo diff --git a/arch/arm/mach-imx/clk-imx6q.c b/arch/arm/mach-imx/clk-imx6q.c index e5a82bb..a37756c 100644 --- a/arch/arm/mach-imx/clk-imx6q.c +++ b/arch/arm/mach-imx/clk-imx6q.c @@ -105,7 +105,7 @@ static const char *gpu2d_core_sels[] = { "axi", "pll3_usb_otg", "pll2_pfd0_352m" static const char *gpu3d_core_sels[] = { "mmdc_ch0_axi", "pll3_usb_otg", "pll2_pfd1_594m", "pll2_pfd2_396m", }; static const char *gpu3d_shader_sels[] = { "mmdc_ch0_axi", "pll3_usb_otg", "pll2_pfd1_594m", "pll2_pfd9_720m", }; static const char *ipu_sels[] = { "mmdc_ch0_axi", "pll2_pfd2_396m", "pll3_120m", "pll3_pfd1_540m", }; -static const char *ldb_di_sels[] = { "pll5_video", "pll2_pfd0_352m", "pll2_pfd2_396m", "pll3_pfd1_540m", }; +static const char *ldb_di_sels[] = { "pll5_video", "pll2_pfd0_352m", "pll2_pfd2_396m", "mmdc_ch1_axi", "pll3_pfd1_540m", }; static const char *ipu_di_pre_sels[] = { "mmdc_ch0_axi", "pll3_usb_otg", "pll5_video", "pll2_pfd0_352m", "pll2_pfd2_396m", "pll3_pfd1_540m", }; static const char *ipu1_di0_sels[] = { "ipu1_di0_pre", "dummy", "dummy", "ldb_di0", "ldb_di1", }; static const char *ipu1_di1_sels[] = { "ipu1_di1_pre", "dummy", "dummy", "ldb_di0", "ldb_di1", }; -- cgit v0.10.2 From 9a2d4825a9368e018003a2732a61be063d178f67 Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Tue, 5 Jun 2012 13:53:32 +0200 Subject: ARM i.MX5: switch IPU clk support to devicetree bindings The i.MX5 clk support has platform based clock bindings for the IPU. IPU support is devicetree only, so move them over to devicetree based bindings. Also, enable MIPI clocks which do not have a device associated with, but still need to be enabled to do graphics on i.MX51. Signed-off-by: Sascha Hauer Acked-by: Shawn Guo diff --git a/arch/arm/mach-imx/clk-imx51-imx53.c b/arch/arm/mach-imx/clk-imx51-imx53.c index 6cb9795..73b241d 100644 --- a/arch/arm/mach-imx/clk-imx51-imx53.c +++ b/arch/arm/mach-imx/clk-imx51-imx53.c @@ -305,6 +305,10 @@ static void __init mx5_clocks_common_init(unsigned long rate_ckil, clk_prepare_enable(clk[spba]); clk_prepare_enable(clk[emi_fast_gate]); /* fec */ clk_prepare_enable(clk[emi_slow_gate]); /* eim */ + clk_prepare_enable(clk[mipi_hsc1_gate]); + clk_prepare_enable(clk[mipi_hsc2_gate]); + clk_prepare_enable(clk[mipi_esc_gate]); + clk_prepare_enable(clk[mipi_hsp_gate]); clk_prepare_enable(clk[tmax1]); clk_prepare_enable(clk[tmax2]); /* esdhc2, fec */ clk_prepare_enable(clk[tmax3]); /* esdhc1, esdhc4 */ @@ -348,10 +352,9 @@ int __init mx51_clocks_init(unsigned long rate_ckil, unsigned long rate_osc, clk_register_clkdev(clk[mx51_mipi], "mipi_hsp", NULL); clk_register_clkdev(clk[vpu_gate], NULL, "imx51-vpu.0"); clk_register_clkdev(clk[fec_gate], NULL, "imx27-fec.0"); - clk_register_clkdev(clk[ipu_gate], "bus", "imx51-ipu"); - clk_register_clkdev(clk[ipu_di0_gate], "di0", "imx51-ipu"); - clk_register_clkdev(clk[ipu_di1_gate], "di1", "imx51-ipu"); - clk_register_clkdev(clk[ipu_gate], "hsp", "imx51-ipu"); + clk_register_clkdev(clk[ipu_gate], "bus", "40000000.ipu"); + clk_register_clkdev(clk[ipu_di0_gate], "di0", "40000000.ipu"); + clk_register_clkdev(clk[ipu_di1_gate], "di1", "40000000.ipu"); clk_register_clkdev(clk[usb_phy_gate], "phy", "mxc-ehci.0"); clk_register_clkdev(clk[esdhc1_ipg_gate], "ipg", "sdhci-esdhc-imx51.0"); clk_register_clkdev(clk[dummy], "ahb", "sdhci-esdhc-imx51.0"); @@ -441,10 +444,10 @@ int __init mx53_clocks_init(unsigned long rate_ckil, unsigned long rate_osc, clk_register_clkdev(clk[vpu_gate], NULL, "imx53-vpu.0"); clk_register_clkdev(clk[i2c3_gate], NULL, "imx21-i2c.2"); clk_register_clkdev(clk[fec_gate], NULL, "imx25-fec.0"); - clk_register_clkdev(clk[ipu_gate], "bus", "imx53-ipu"); - clk_register_clkdev(clk[ipu_di0_gate], "di0", "imx53-ipu"); - clk_register_clkdev(clk[ipu_di1_gate], "di1", "imx53-ipu"); - clk_register_clkdev(clk[ipu_gate], "hsp", "imx53-ipu"); + clk_register_clkdev(clk[ipu_gate], "bus", "18000000.ipu"); + clk_register_clkdev(clk[ipu_di0_gate], "di0", "18000000.ipu"); + clk_register_clkdev(clk[ipu_di1_gate], "di1", "18000000.ipu"); + clk_register_clkdev(clk[ipu_gate], "hsp", "18000000.ipu"); clk_register_clkdev(clk[usb_phy1_gate], "usb_phy1", "mxc-ehci.0"); clk_register_clkdev(clk[esdhc1_ipg_gate], "ipg", "sdhci-esdhc-imx53.0"); clk_register_clkdev(clk[dummy], "ahb", "sdhci-esdhc-imx53.0"); -- cgit v0.10.2 From abed9a6bf2bb79e94ac6d6127f70be2f9718bb33 Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Tue, 5 Jun 2012 13:52:10 +0200 Subject: ARM i.MX53: Add IPU support This adds the IPU device to the devicetree. Signed-off-by: Sascha Hauer Acked-by: Shawn Guo diff --git a/arch/arm/boot/dts/imx53.dtsi b/arch/arm/boot/dts/imx53.dtsi index caf09ff..8317a17 100644 --- a/arch/arm/boot/dts/imx53.dtsi +++ b/arch/arm/boot/dts/imx53.dtsi @@ -67,6 +67,13 @@ interrupt-parent = <&tzic>; ranges; + ipu: ipu@18000000 { + #crtc-cells = <1>; + compatible = "fsl,imx53-ipu"; + reg = <0x18000000 0x080000000>; + interrupts = <11 10>; + }; + aips@50000000 { /* AIPS1 */ compatible = "fsl,aips-bus", "simple-bus"; #address-cells = <1>; -- cgit v0.10.2 From b5af6b100c9fb4498051f831c90f69adebd82b88 Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Mon, 12 Nov 2012 12:56:00 +0100 Subject: ARM i.MX51: Add IPU support This adds the IPU device to the devicetree along with the necessary pinctrl settings for the parallel display outputs. Signed-off-by: Sascha Hauer Acked-by: Shawn Guo diff --git a/arch/arm/boot/dts/imx51.dtsi b/arch/arm/boot/dts/imx51.dtsi index 54aea74..44c7af7 100644 --- a/arch/arm/boot/dts/imx51.dtsi +++ b/arch/arm/boot/dts/imx51.dtsi @@ -62,6 +62,13 @@ interrupt-parent = <&tzic>; ranges; + ipu: ipu@40000000 { + #crtc-cells = <1>; + compatible = "fsl,imx51-ipu"; + reg = <0x40000000 0x20000000>; + interrupts = <11 10>; + }; + aips@70000000 { /* AIPS1 */ compatible = "fsl,aips-bus", "simple-bus"; #address-cells = <1>; @@ -295,6 +302,66 @@ }; }; + ipu_disp1 { + pinctrl_ipu_disp1_1: ipudisp1grp-1 { + fsl,pins = < + 528 0x5 /* MX51_PAD_DISP1_DAT0__DISP1_DAT0 */ + 529 0x5 /* MX51_PAD_DISP1_DAT1__DISP1_DAT1 */ + 530 0x5 /* MX51_PAD_DISP1_DAT2__DISP1_DAT2 */ + 531 0x5 /* MX51_PAD_DISP1_DAT3__DISP1_DAT3 */ + 532 0x5 /* MX51_PAD_DISP1_DAT4__DISP1_DAT4 */ + 533 0x5 /* MX51_PAD_DISP1_DAT5__DISP1_DAT5 */ + 535 0x5 /* MX51_PAD_DISP1_DAT6__DISP1_DAT6 */ + 537 0x5 /* MX51_PAD_DISP1_DAT7__DISP1_DAT7 */ + 539 0x5 /* MX51_PAD_DISP1_DAT8__DISP1_DAT8 */ + 541 0x5 /* MX51_PAD_DISP1_DAT9__DISP1_DAT9 */ + 543 0x5 /* MX51_PAD_DISP1_DAT10__DISP1_DAT10 */ + 545 0x5 /* MX51_PAD_DISP1_DAT11__DISP1_DAT11 */ + 547 0x5 /* MX51_PAD_DISP1_DAT12__DISP1_DAT12 */ + 549 0x5 /* MX51_PAD_DISP1_DAT13__DISP1_DAT13 */ + 551 0x5 /* MX51_PAD_DISP1_DAT14__DISP1_DAT14 */ + 553 0x5 /* MX51_PAD_DISP1_DAT15__DISP1_DAT15 */ + 555 0x5 /* MX51_PAD_DISP1_DAT16__DISP1_DAT16 */ + 557 0x5 /* MX51_PAD_DISP1_DAT17__DISP1_DAT17 */ + 559 0x5 /* MX51_PAD_DISP1_DAT18__DISP1_DAT18 */ + 563 0x5 /* MX51_PAD_DISP1_DAT19__DISP1_DAT19 */ + 567 0x5 /* MX51_PAD_DISP1_DAT20__DISP1_DAT20 */ + 571 0x5 /* MX51_PAD_DISP1_DAT21__DISP1_DAT21 */ + 575 0x5 /* MX51_PAD_DISP1_DAT22__DISP1_DAT22 */ + 579 0x5 /* MX51_PAD_DISP1_DAT23__DISP1_DAT23 */ + 584 0x5 /* MX51_PAD_DI1_PIN2__DI1_PIN2 (hsync) */ + 583 0x5 /* MX51_PAD_DI1_PIN3__DI1_PIN3 (vsync) */ + >; + }; + }; + + ipu_disp2 { + pinctrl_ipu_disp2_1: ipudisp2grp-1 { + fsl,pins = < + 603 0x5 /* MX51_PAD_DISP2_DAT0__DISP2_DAT0 */ + 608 0x5 /* MX51_PAD_DISP2_DAT1__DISP2_DAT1 */ + 613 0x5 /* MX51_PAD_DISP2_DAT2__DISP2_DAT2 */ + 614 0x5 /* MX51_PAD_DISP2_DAT3__DISP2_DAT3 */ + 615 0x5 /* MX51_PAD_DISP2_DAT4__DISP2_DAT4 */ + 616 0x5 /* MX51_PAD_DISP2_DAT5__DISP2_DAT5 */ + 617 0x5 /* MX51_PAD_DISP2_DAT6__DISP2_DAT6 */ + 622 0x5 /* MX51_PAD_DISP2_DAT7__DISP2_DAT7 */ + 627 0x5 /* MX51_PAD_DISP2_DAT8__DISP2_DAT8 */ + 633 0x5 /* MX51_PAD_DISP2_DAT9__DISP2_DAT9 */ + 637 0x5 /* MX51_PAD_DISP2_DAT10__DISP2_DAT10 */ + 643 0x5 /* MX51_PAD_DISP2_DAT11__DISP2_DAT11 */ + 648 0x5 /* MX51_PAD_DISP2_DAT12__DISP2_DAT12 */ + 652 0x5 /* MX51_PAD_DISP2_DAT13__DISP2_DAT13 */ + 656 0x5 /* MX51_PAD_DISP2_DAT14__DISP2_DAT14 */ + 661 0x5 /* MX51_PAD_DISP2_DAT15__DISP2_DAT15 */ + 593 0x5 /* MX51_PAD_DI2_PIN2__DI2_PIN2 (hsync) */ + 595 0x5 /* MX51_PAD_DI2_PIN3__DI2_PIN3 (vsync) */ + 597 0x5 /* MX51_PAD_DI2_DISP_CLK__DI2_DISP_CLK */ + 599 0x5 /* MX51_PAD_DI_GP4__DI2_PIN15 */ + >; + }; + }; + uart1 { pinctrl_uart1_1: uart1grp-1 { fsl,pins = < -- cgit v0.10.2 From 91660d743e6b283db54e85a8ea175c1d7be3055e Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Mon, 12 Nov 2012 15:52:21 +0100 Subject: ARM i.MX6: Add IPU support This adds the IPU devices to the devicetree. Signed-off-by: Sascha Hauer Acked-by: Shawn Guo diff --git a/arch/arm/boot/dts/imx6q.dtsi b/arch/arm/boot/dts/imx6q.dtsi index f604a44..69fe8f4 100644 --- a/arch/arm/boot/dts/imx6q.dtsi +++ b/arch/arm/boot/dts/imx6q.dtsi @@ -1001,5 +1001,23 @@ status = "disabled"; }; }; + + ipu1: ipu@02400000 { + #crtc-cells = <1>; + compatible = "fsl,imx6q-ipu"; + reg = <0x02400000 0x400000>; + interrupts = <0 6 0x4 0 5 0x4>; + clocks = <&clks 130>, <&clks 131>, <&clks 132>; + clock-names = "bus", "di0", "di1"; + }; + + ipu2: ipu@02800000 { + #crtc-cells = <1>; + compatible = "fsl,imx6q-ipu"; + reg = <0x02800000 0x400000>; + interrupts = <0 8 0x4 0 7 0x4>; + clocks = <&clks 133>, <&clks 134>, <&clks 137>; + clock-names = "bus", "di0", "di1"; + }; }; }; -- cgit v0.10.2 From d6aef84a48fa54ac606ae719fcd125199939f43d Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Mon, 12 Nov 2012 15:39:01 +0100 Subject: ARM i.MX51 babbage: Add display support The babbage board has a DVI-I output which allows to output analog and digital signals simultaneously. This patch adds support for it to the devicetree. The DDC signals are not wired up on the board, so DRM will fall back on default VESA modes. Signed-off-by: Sascha Hauer Acked-by: Shawn Guo diff --git a/arch/arm/boot/dts/imx51-babbage.dts b/arch/arm/boot/dts/imx51-babbage.dts index cbd2b1c..567e7ee 100644 --- a/arch/arm/boot/dts/imx51-babbage.dts +++ b/arch/arm/boot/dts/imx51-babbage.dts @@ -22,6 +22,22 @@ }; soc { + display@di0 { + compatible = "fsl,imx-parallel-display"; + crtcs = <&ipu 0>; + interface-pix-fmt = "rgb24"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ipu_disp1_1>; + }; + + display@di1 { + compatible = "fsl,imx-parallel-display"; + crtcs = <&ipu 1>; + interface-pix-fmt = "rgb565"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ipu_disp2_1>; + }; + aips@70000000 { /* aips-1 */ spba@70000000 { esdhc@70004000 { /* ESDHC1 */ -- cgit v0.10.2 From 404525d5a7ecc847b5ac178dad96402f1e102ccc Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Fri, 16 Nov 2012 21:21:43 +0100 Subject: clk: sunxi: Add dummy fixed rate clock for Allwinner A1X SoCs Signed-off-by: Maxime Ripard Cc: Mike Turquette diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile index 71a25b9..9c300a8 100644 --- a/drivers/clk/Makefile +++ b/drivers/clk/Makefile @@ -19,6 +19,7 @@ endif obj-$(CONFIG_MACH_LOONGSON1) += clk-ls1x.o obj-$(CONFIG_ARCH_U8500) += ux500/ obj-$(CONFIG_ARCH_VT8500) += clk-vt8500.o +obj-$(CONFIG_ARCH_SUNXI) += clk-sunxi.o # Chip specific obj-$(CONFIG_COMMON_CLK_WM831X) += clk-wm831x.o diff --git a/drivers/clk/clk-sunxi.c b/drivers/clk/clk-sunxi.c new file mode 100644 index 0000000..0e831b5 --- /dev/null +++ b/drivers/clk/clk-sunxi.c @@ -0,0 +1,30 @@ +/* + * Copyright 2012 Maxime Ripard + * + * Maxime Ripard + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include +#include +#include +#include + +static const __initconst struct of_device_id clk_match[] = { + { .compatible = "fixed-clock", .data = of_fixed_clk_setup, }, + {} +}; + +void __init sunxi_init_clocks(void) +{ + of_clk_init(clk_match); +} diff --git a/include/linux/clk/sunxi.h b/include/linux/clk/sunxi.h new file mode 100644 index 0000000..e074fdd --- /dev/null +++ b/include/linux/clk/sunxi.h @@ -0,0 +1,22 @@ +/* + * Copyright 2012 Maxime Ripard + * + * Maxime Ripard + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __LINUX_CLK_SUNXI_H_ +#define __LINUX_CLK_SUNXI_H_ + +void __init sunxi_init_clocks(void); + +#endif -- cgit v0.10.2 From b2ac5d7549710173ea0217bf8c7b3f71da5220d4 Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Mon, 12 Nov 2012 15:07:50 +0100 Subject: clocksource: sunxi: Add Allwinner A1X Timer Driver Signed-off-by: Maxime Ripard CC: Thomas Gleixner CC: John Stultz diff --git a/Documentation/devicetree/bindings/timer/allwinner,sunxi-timer.txt b/Documentation/devicetree/bindings/timer/allwinner,sunxi-timer.txt new file mode 100644 index 0000000..0c7b64e --- /dev/null +++ b/Documentation/devicetree/bindings/timer/allwinner,sunxi-timer.txt @@ -0,0 +1,17 @@ +Allwinner A1X SoCs Timer Controller + +Required properties: + +- compatible : should be "allwinner,sunxi-timer" +- reg : Specifies base physical address and size of the registers. +- interrupts : The interrupt of the first timer +- clocks: phandle to the source clock (usually a 24 MHz fixed clock) + +Example: + +timer { + compatible = "allwinner,sunxi-timer"; + reg = <0x01c20c00 0x400>; + interrupts = <22>; + clocks = <&osc>; +}; diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig index 6a78073..a098573 100644 --- a/drivers/clocksource/Kconfig +++ b/drivers/clocksource/Kconfig @@ -22,6 +22,9 @@ config DW_APB_TIMER_OF config ARMADA_370_XP_TIMER bool +config SUNXI_TIMER + bool + config CLKSRC_DBX500_PRCMU bool "Clocksource PRCMU Timer" depends on UX500_SOC_DB8500 diff --git a/drivers/clocksource/Makefile b/drivers/clocksource/Makefile index 603be36..36f06de 100644 --- a/drivers/clocksource/Makefile +++ b/drivers/clocksource/Makefile @@ -14,5 +14,6 @@ obj-$(CONFIG_DW_APB_TIMER_OF) += dw_apb_timer_of.o obj-$(CONFIG_CLKSRC_DBX500_PRCMU) += clksrc-dbx500-prcmu.o obj-$(CONFIG_ARMADA_370_XP_TIMER) += time-armada-370-xp.o obj-$(CONFIG_ARCH_BCM2835) += bcm2835_timer.o +obj-$(CONFIG_SUNXI_TIMER) += sunxi_timer.o obj-$(CONFIG_CLKSRC_ARM_GENERIC) += arm_generic.o diff --git a/drivers/clocksource/sunxi_timer.c b/drivers/clocksource/sunxi_timer.c new file mode 100644 index 0000000..3c46434 --- /dev/null +++ b/drivers/clocksource/sunxi_timer.c @@ -0,0 +1,170 @@ +/* + * Allwinner A1X SoCs timer handling. + * + * Copyright (C) 2012 Maxime Ripard + * + * Maxime Ripard + * + * Based on code from + * Allwinner Technology Co., Ltd. + * Benn Huang + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define TIMER_CTL_REG 0x00 +#define TIMER_CTL_ENABLE (1 << 0) +#define TIMER_IRQ_ST_REG 0x04 +#define TIMER0_CTL_REG 0x10 +#define TIMER0_CTL_ENABLE (1 << 0) +#define TIMER0_CTL_AUTORELOAD (1 << 1) +#define TIMER0_CTL_ONESHOT (1 << 7) +#define TIMER0_INTVAL_REG 0x14 +#define TIMER0_CNTVAL_REG 0x18 + +#define TIMER_SCAL 16 + +static void __iomem *timer_base; + +static void sunxi_clkevt_mode(enum clock_event_mode mode, + struct clock_event_device *clk) +{ + u32 u = readl(timer_base + TIMER0_CTL_REG); + + switch (mode) { + case CLOCK_EVT_MODE_PERIODIC: + u &= ~(TIMER0_CTL_ONESHOT); + writel(u | TIMER0_CTL_ENABLE, timer_base + TIMER0_CTL_REG); + break; + + case CLOCK_EVT_MODE_ONESHOT: + writel(u | TIMER0_CTL_ONESHOT, timer_base + TIMER0_CTL_REG); + break; + case CLOCK_EVT_MODE_UNUSED: + case CLOCK_EVT_MODE_SHUTDOWN: + default: + writel(u & ~(TIMER0_CTL_ENABLE), timer_base + TIMER0_CTL_REG); + break; + } +} + +static int sunxi_clkevt_next_event(unsigned long evt, + struct clock_event_device *unused) +{ + u32 u = readl(timer_base + TIMER0_CTL_REG); + writel(evt, timer_base + TIMER0_CNTVAL_REG); + writel(u | TIMER0_CTL_ENABLE | TIMER0_CTL_AUTORELOAD, + timer_base + TIMER0_CTL_REG); + + return 0; +} + +static struct clock_event_device sunxi_clockevent = { + .name = "sunxi_tick", + .shift = 32, + .rating = 300, + .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT, + .set_mode = sunxi_clkevt_mode, + .set_next_event = sunxi_clkevt_next_event, +}; + + +static irqreturn_t sunxi_timer_interrupt(int irq, void *dev_id) +{ + struct clock_event_device *evt = (struct clock_event_device *)dev_id; + + writel(0x1, timer_base + TIMER_IRQ_ST_REG); + evt->event_handler(evt); + + return IRQ_HANDLED; +} + +static struct irqaction sunxi_timer_irq = { + .name = "sunxi_timer0", + .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL, + .handler = sunxi_timer_interrupt, + .dev_id = &sunxi_clockevent, +}; + +static struct of_device_id sunxi_timer_dt_ids[] = { + { .compatible = "allwinner,sunxi-timer" }, +}; + +static void __init sunxi_timer_init(void) +{ + struct device_node *node; + unsigned long rate = 0; + struct clk *clk; + int ret, irq; + u32 val; + + node = of_find_matching_node(NULL, sunxi_timer_dt_ids); + if (!node) + panic("No sunxi timer node"); + + timer_base = of_iomap(node, 0); + if (!timer_base) + panic("Can't map registers"); + + irq = irq_of_parse_and_map(node, 0); + if (irq <= 0) + panic("Can't parse IRQ"); + + sunxi_init_clocks(); + + clk = of_clk_get(node, 0); + if (IS_ERR(clk)) + panic("Can't get timer clock"); + + rate = clk_get_rate(clk); + + writel(rate / (TIMER_SCAL * HZ), + timer_base + TIMER0_INTVAL_REG); + + /* set clock source to HOSC, 16 pre-division */ + val = readl(timer_base + TIMER0_CTL_REG); + val &= ~(0x07 << 4); + val &= ~(0x03 << 2); + val |= (4 << 4) | (1 << 2); + writel(val, timer_base + TIMER0_CTL_REG); + + /* set mode to auto reload */ + val = readl(timer_base + TIMER0_CTL_REG); + writel(val | TIMER0_CTL_AUTORELOAD, timer_base + TIMER0_CTL_REG); + + ret = setup_irq(irq, &sunxi_timer_irq); + if (ret) + pr_warn("failed to setup irq %d\n", irq); + + /* Enable timer0 interrupt */ + val = readl(timer_base + TIMER_CTL_REG); + writel(val | TIMER_CTL_ENABLE, timer_base + TIMER_CTL_REG); + + sunxi_clockevent.mult = div_sc(rate / TIMER_SCAL, + NSEC_PER_SEC, + sunxi_clockevent.shift); + sunxi_clockevent.max_delta_ns = clockevent_delta2ns(0xff, + &sunxi_clockevent); + sunxi_clockevent.min_delta_ns = clockevent_delta2ns(0x1, + &sunxi_clockevent); + sunxi_clockevent.cpumask = cpumask_of(0); + + clockevents_register_device(&sunxi_clockevent); +} + +struct sys_timer sunxi_timer = { + .init = sunxi_timer_init, +}; diff --git a/include/linux/sunxi_timer.h b/include/linux/sunxi_timer.h new file mode 100644 index 0000000..b9165bb --- /dev/null +++ b/include/linux/sunxi_timer.h @@ -0,0 +1,24 @@ +/* + * Copyright 2012 Maxime Ripard + * + * Maxime Ripard + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __SUNXI_TIMER_H +#define __SUNXI_TIMER_H + +#include + +extern struct sys_timer sunxi_timer; + +#endif -- cgit v0.10.2 From afd24e146826cec0f46929263a0c874406a19cd8 Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Wed, 14 Nov 2012 09:59:14 +0100 Subject: irqchip: sunxi: Add irq controller driver Signed-off-by: Maxime Ripard CC: Thomas Gleixner diff --git a/Documentation/devicetree/bindings/interrupt-controller/allwinner,sunxi-ic.txt b/Documentation/devicetree/bindings/interrupt-controller/allwinner,sunxi-ic.txt new file mode 100644 index 0000000..7f9fb85 --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/allwinner,sunxi-ic.txt @@ -0,0 +1,104 @@ +Allwinner Sunxi Interrupt Controller + +Required properties: + +- compatible : should be "allwinner,sunxi-ic" +- reg : Specifies base physical address and size of the registers. +- interrupt-controller : Identifies the node as an interrupt controller +- #interrupt-cells : Specifies the number of cells needed to encode an + interrupt source. The value shall be 1. + +The interrupt sources are as follows: + +0: ENMI +1: UART0 +2: UART1 +3: UART2 +4: UART3 +5: IR0 +6: IR1 +7: I2C0 +8: I2C1 +9: I2C2 +10: SPI0 +11: SPI1 +12: SPI2 +13: SPDIF +14: AC97 +15: TS +16: I2S +17: UART4 +18: UART5 +19: UART6 +20: UART7 +21: KEYPAD +22: TIMER0 +23: TIMER1 +24: TIMER2 +25: TIMER3 +26: CAN +27: DMA +28: PIO +29: TOUCH_PANEL +30: AUDIO_CODEC +31: LRADC +32: SDMC0 +33: SDMC1 +34: SDMC2 +35: SDMC3 +36: MEMSTICK +37: NAND +38: USB0 +39: USB1 +40: USB2 +41: SCR +42: CSI0 +43: CSI1 +44: LCDCTRL0 +45: LCDCTRL1 +46: MP +47: DEFEBE0 +48: DEFEBE1 +49: PMU +50: SPI3 +51: TZASC +52: PATA +53: VE +54: SS +55: EMAC +56: SATA +57: GPS +58: HDMI +59: TVE +60: ACE +61: TVD +62: PS2_0 +63: PS2_1 +64: USB3 +65: USB4 +66: PLE_PFM +67: TIMER4 +68: TIMER5 +69: GPU_GP +70: GPU_GPMMU +71: GPU_PP0 +72: GPU_PPMMU0 +73: GPU_PMU +74: GPU_RSV0 +75: GPU_RSV1 +76: GPU_RSV2 +77: GPU_RSV3 +78: GPU_RSV4 +79: GPU_RSV5 +80: GPU_RSV6 +82: SYNC_TIMER0 +83: SYNC_TIMER1 + +Example: + +intc: interrupt-controller { + compatible = "allwinner,sunxi-ic"; + reg = <0x01c20400 0x400>; + interrupt-controller; + #interrupt-cells = <2>; +}; diff --git a/drivers/irqchip/Makefile b/drivers/irqchip/Makefile index 054321d..2444d07 100644 --- a/drivers/irqchip/Makefile +++ b/drivers/irqchip/Makefile @@ -1 +1,2 @@ obj-$(CONFIG_ARCH_BCM2835) += irq-bcm2835.o +obj-$(CONFIG_ARCH_SUNXI) += irq-sunxi.o diff --git a/drivers/irqchip/irq-sunxi.c b/drivers/irqchip/irq-sunxi.c new file mode 100644 index 0000000..eef41a4 --- /dev/null +++ b/drivers/irqchip/irq-sunxi.c @@ -0,0 +1,150 @@ +/* + * Allwinner A1X SoCs IRQ chip driver. + * + * Copyright (C) 2012 Maxime Ripard + * + * Maxime Ripard + * + * Based on code from + * Allwinner Technology Co., Ltd. + * Benn Huang + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include +#include +#include +#include +#include + +#include + +#define SUNXI_IRQ_VECTOR_REG 0x00 +#define SUNXI_IRQ_PROTECTION_REG 0x08 +#define SUNXI_IRQ_NMI_CTRL_REG 0x0c +#define SUNXI_IRQ_PENDING_REG(x) (0x10 + 0x4 * x) +#define SUNXI_IRQ_FIQ_PENDING_REG(x) (0x20 + 0x4 * x) +#define SUNXI_IRQ_ENABLE_REG(x) (0x40 + 0x4 * x) +#define SUNXI_IRQ_MASK_REG(x) (0x50 + 0x4 * x) + +static void __iomem *sunxi_irq_base; +static struct irq_domain *sunxi_irq_domain; + +void sunxi_irq_ack(struct irq_data *irqd) +{ + unsigned int irq = irqd_to_hwirq(irqd); + unsigned int irq_off = irq % 32; + int reg = irq / 32; + u32 val; + + val = readl(sunxi_irq_base + SUNXI_IRQ_PENDING_REG(reg)); + writel(val | (1 << irq_off), + sunxi_irq_base + SUNXI_IRQ_PENDING_REG(reg)); +} + +static void sunxi_irq_mask(struct irq_data *irqd) +{ + unsigned int irq = irqd_to_hwirq(irqd); + unsigned int irq_off = irq % 32; + int reg = irq / 32; + u32 val; + + val = readl(sunxi_irq_base + SUNXI_IRQ_ENABLE_REG(reg)); + writel(val & ~(1 << irq_off), + sunxi_irq_base + SUNXI_IRQ_ENABLE_REG(reg)); +} + +static void sunxi_irq_unmask(struct irq_data *irqd) +{ + unsigned int irq = irqd_to_hwirq(irqd); + unsigned int irq_off = irq % 32; + int reg = irq / 32; + u32 val; + + val = readl(sunxi_irq_base + SUNXI_IRQ_ENABLE_REG(reg)); + writel(val | (1 << irq_off), + sunxi_irq_base + SUNXI_IRQ_ENABLE_REG(reg)); +} + +static struct irq_chip sunxi_irq_chip = { + .name = "sunxi_irq", + .irq_ack = sunxi_irq_ack, + .irq_mask = sunxi_irq_mask, + .irq_unmask = sunxi_irq_unmask, +}; + +static int sunxi_irq_map(struct irq_domain *d, unsigned int virq, + irq_hw_number_t hw) +{ + irq_set_chip_and_handler(virq, &sunxi_irq_chip, + handle_level_irq); + set_irq_flags(virq, IRQF_VALID | IRQF_PROBE); + + return 0; +} + +static struct irq_domain_ops sunxi_irq_ops = { + .map = sunxi_irq_map, + .xlate = irq_domain_xlate_onecell, +}; + +static int __init sunxi_of_init(struct device_node *node, + struct device_node *parent) +{ + sunxi_irq_base = of_iomap(node, 0); + if (!sunxi_irq_base) + panic("%s: unable to map IC registers\n", + node->full_name); + + /* Disable all interrupts */ + writel(0, sunxi_irq_base + SUNXI_IRQ_ENABLE_REG(0)); + writel(0, sunxi_irq_base + SUNXI_IRQ_ENABLE_REG(1)); + writel(0, sunxi_irq_base + SUNXI_IRQ_ENABLE_REG(2)); + + /* Mask all the interrupts */ + writel(0, sunxi_irq_base + SUNXI_IRQ_MASK_REG(0)); + writel(0, sunxi_irq_base + SUNXI_IRQ_MASK_REG(1)); + writel(0, sunxi_irq_base + SUNXI_IRQ_MASK_REG(2)); + + /* Clear all the pending interrupts */ + writel(0xffffffff, sunxi_irq_base + SUNXI_IRQ_PENDING_REG(0)); + writel(0xffffffff, sunxi_irq_base + SUNXI_IRQ_PENDING_REG(1)); + writel(0xffffffff, sunxi_irq_base + SUNXI_IRQ_PENDING_REG(2)); + + /* Enable protection mode */ + writel(0x01, sunxi_irq_base + SUNXI_IRQ_PROTECTION_REG); + + /* Configure the external interrupt source type */ + writel(0x00, sunxi_irq_base + SUNXI_IRQ_NMI_CTRL_REG); + + sunxi_irq_domain = irq_domain_add_linear(node, 3 * 32, + &sunxi_irq_ops, NULL); + if (!sunxi_irq_domain) + panic("%s: unable to create IRQ domain\n", node->full_name); + + return 0; +} + +static struct of_device_id sunxi_irq_dt_ids[] __initconst = { + { .compatible = "allwinner,sunxi-ic", .data = sunxi_of_init } +}; + +void __init sunxi_init_irq(void) +{ + of_irq_init(sunxi_irq_dt_ids); +} + +asmlinkage void __exception_irq_entry sunxi_handle_irq(struct pt_regs *regs) +{ + u32 irq, hwirq; + + hwirq = readl(sunxi_irq_base + SUNXI_IRQ_VECTOR_REG) >> 2; + while (hwirq != 0) { + irq = irq_find_mapping(sunxi_irq_domain, hwirq); + handle_IRQ(irq, regs); + hwirq = readl(sunxi_irq_base + SUNXI_IRQ_VECTOR_REG) >> 2; + } +} diff --git a/include/linux/irqchip/sunxi.h b/include/linux/irqchip/sunxi.h new file mode 100644 index 0000000..1fe2c22 --- /dev/null +++ b/include/linux/irqchip/sunxi.h @@ -0,0 +1,27 @@ +/* + * Copyright 2012 Maxime Ripard + * + * Maxime Ripard + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __LINUX_IRQCHIP_SUNXI_H +#define __LINUX_IRQCHIP_SUNXI_H + +#include + +extern void sunxi_init_irq(void); + +extern asmlinkage void __exception_irq_entry sunxi_handle_irq( + struct pt_regs *regs); + +#endif -- cgit v0.10.2 From 3b52634f0b7adaaf2b29569025287b938b7c71a6 Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Thu, 8 Nov 2012 12:40:16 +0100 Subject: ARM: sunxi: Add basic support for Allwinner A1x SoCs Signed-off-by: Maxime Ripard Acked-by: Stefan Roese diff --git a/Documentation/arm/sunxi/README b/Documentation/arm/sunxi/README new file mode 100644 index 0000000..87a1e8f --- /dev/null +++ b/Documentation/arm/sunxi/README @@ -0,0 +1,19 @@ +ARM Allwinner SoCs +================== + +This document lists all the ARM Allwinner SoCs that are currently +supported in mainline by the Linux kernel. This document will also +provide links to documentation and or datasheet for these SoCs. + +SunXi family +------------ + + Flavors: + Allwinner A10 (sun4i) + Datasheet : http://dl.linux-sunxi.org/A10/A10%20Datasheet%20-%20v1.21%20%282012-04-06%29.pdf + + Allwinner A13 (sun5i) + Datasheet : http://dl.linux-sunxi.org/A13/A13%20Datasheet%20-%20v1.12%20%282012-03-29%29.pdf + + Core: Cortex A8 + Linux kernel mach directory: arch/arm/mach-sunxi \ No newline at end of file diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index ade7e92..1abb573 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -1113,6 +1113,8 @@ source "arch/arm/mach-exynos/Kconfig" source "arch/arm/mach-shmobile/Kconfig" +source "arch/arm/mach-sunxi/Kconfig" + source "arch/arm/mach-prima2/Kconfig" source "arch/arm/mach-tegra/Kconfig" diff --git a/arch/arm/Makefile b/arch/arm/Makefile index 5f914fc..363320a 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -193,6 +193,7 @@ machine-$(CONFIG_ARCH_SPEAR13XX) += spear13xx machine-$(CONFIG_ARCH_SPEAR3XX) += spear3xx machine-$(CONFIG_MACH_SPEAR600) += spear6xx machine-$(CONFIG_ARCH_ZYNQ) += zynq +machine-$(CONFIG_ARCH_SUNXI) += sunxi # Platform directory name. This list is sorted alphanumerically # by CONFIG_* macro name. diff --git a/arch/arm/mach-sunxi/Kconfig b/arch/arm/mach-sunxi/Kconfig new file mode 100644 index 0000000..3fdd008 --- /dev/null +++ b/arch/arm/mach-sunxi/Kconfig @@ -0,0 +1,9 @@ +config ARCH_SUNXI + bool "Allwinner A1X SOCs" if ARCH_MULTI_V7 + select CLKSRC_MMIO + select COMMON_CLK + select GENERIC_CLOCKEVENTS + select GENERIC_IRQ_CHIP + select PINCTRL + select SPARSE_IRQ + select SUNXI_TIMER diff --git a/arch/arm/mach-sunxi/Makefile b/arch/arm/mach-sunxi/Makefile new file mode 100644 index 0000000..93bebfc --- /dev/null +++ b/arch/arm/mach-sunxi/Makefile @@ -0,0 +1 @@ +obj-$(CONFIG_ARCH_SUNXI) += sunxi.o diff --git a/arch/arm/mach-sunxi/Makefile.boot b/arch/arm/mach-sunxi/Makefile.boot new file mode 100644 index 0000000..46d4cf0 --- /dev/null +++ b/arch/arm/mach-sunxi/Makefile.boot @@ -0,0 +1 @@ +zreladdr-$(CONFIG_ARCH_SUNXI) += 0x40008000 diff --git a/arch/arm/mach-sunxi/sunxi.c b/arch/arm/mach-sunxi/sunxi.c new file mode 100644 index 0000000..8f42df8 --- /dev/null +++ b/arch/arm/mach-sunxi/sunxi.c @@ -0,0 +1,60 @@ +/* + * Device Tree support for Allwinner A1X SoCs + * + * Copyright (C) 2012 Maxime Ripard + * + * Maxime Ripard + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include +#include +#include +#include +#include +#include + +#include + +#include + +#include +#include + +#include "sunxi.h" + +static struct map_desc sunxi_io_desc[] __initdata = { + { + .virtual = (unsigned long) SUNXI_REGS_VIRT_BASE, + .pfn = __phys_to_pfn(SUNXI_REGS_PHYS_BASE), + .length = SUNXI_REGS_SIZE, + .type = MT_DEVICE, + }, +}; + +void __init sunxi_map_io(void) +{ + iotable_init(sunxi_io_desc, ARRAY_SIZE(sunxi_io_desc)); +} + +static void __init sunxi_dt_init(void) +{ + of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); +} + +static const char * const sunxi_board_dt_compat[] = { + "allwinner,sun5i", + NULL, +}; + +DT_MACHINE_START(SUNXI_DT, "Allwinner A1X (Device Tree)") + .init_machine = sunxi_dt_init, + .map_io = sunxi_map_io, + .init_irq = sunxi_init_irq, + .handle_irq = sunxi_handle_irq, + .timer = &sunxi_timer, + .dt_compat = sunxi_board_dt_compat, +MACHINE_END diff --git a/arch/arm/mach-sunxi/sunxi.h b/arch/arm/mach-sunxi/sunxi.h new file mode 100644 index 0000000..33b5871 --- /dev/null +++ b/arch/arm/mach-sunxi/sunxi.h @@ -0,0 +1,20 @@ +/* + * Generic definitions for Allwinner SunXi SoCs + * + * Copyright (C) 2012 Maxime Ripard + * + * Maxime Ripard + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef __MACH_SUNXI_H +#define __MACH_SUNXI_H + +#define SUNXI_REGS_PHYS_BASE 0x01c00000 +#define SUNXI_REGS_VIRT_BASE IOMEM(0xf1c00000) +#define SUNXI_REGS_SIZE (SZ_2M + SZ_1M) + +#endif /* __MACH_SUNXI_H */ -- cgit v0.10.2 From cb84fa18a40fb142d725bf5c7594a0a16cd96289 Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Thu, 8 Nov 2012 12:40:49 +0100 Subject: ARM: sunxi: Add earlyprintk support Signed-off-by: Maxime Ripard Acked-by: Stefan Roese diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug index b0f3857..f12bc3a 100644 --- a/arch/arm/Kconfig.debug +++ b/arch/arm/Kconfig.debug @@ -345,6 +345,13 @@ choice Say Y here if you want kernel low-level debugging support on SOCFPGA based platforms. + config DEBUG_SUNXI_UART1 + bool "Kernel low-level debugging messages via sunXi UART1" + depends on ARCH_SUNXI + help + Say Y here if you want kernel low-level debugging support + on Allwinner A1X based platforms on the UART1. + config DEBUG_VEXPRESS_UART0_DETECT bool "Autodetect UART0 on Versatile Express Cortex-A core tiles" depends on ARCH_VEXPRESS && CPU_CP15_MMU @@ -416,6 +423,7 @@ config DEBUG_LL_INCLUDE default "debug/mvebu.S" if DEBUG_MVEBU_UART default "debug/picoxcell.S" if DEBUG_PICOXCELL_UART default "debug/socfpga.S" if DEBUG_SOCFPGA_UART + default "debug/sunxi.S" if DEBUG_SUNXI_UART1 default "debug/vexpress.S" if DEBUG_VEXPRESS_UART0_DETECT || \ DEBUG_VEXPRESS_UART0_CA9 || DEBUG_VEXPRESS_UART0_RS1 default "mach/debug-macro.S" diff --git a/arch/arm/include/debug/sunxi.S b/arch/arm/include/debug/sunxi.S new file mode 100644 index 0000000..3bf61ca --- /dev/null +++ b/arch/arm/include/debug/sunxi.S @@ -0,0 +1,24 @@ +/* + * Early serial output macro for Allwinner A1X SoCs + * + * Copyright (C) 2012 Maxime Ripard + * + * Maxime Ripard + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifdef CONFIG_DEBUG_SUNXI_UART1 +#define SUNXI_UART_DEBUG_PHYS_BASE 0x01c28400 +#define SUNXI_UART_DEBUG_VIRT_BASE 0xf1c28400 +#endif + + .macro addruart, rp, rv, tmp + ldr \rp, =SUNXI_UART_DEBUG_PHYS_BASE + ldr \rv, =SUNXI_UART_DEBUG_VIRT_BASE + .endm + +#define UART_SHIFT 2 +#include -- cgit v0.10.2 From d4da2ebb3e75cab12c3243504adee07198aa2677 Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Wed, 14 Nov 2012 20:17:04 +0100 Subject: ARM: sunxi: Add device tree for the A13 and the Olinuxino board Signed-off-by: Maxime Ripard diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index f37cf9f..9b2d3f0 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -84,6 +84,7 @@ dtb-$(CONFIG_ARCH_SPEAR3XX)+= spear300-evb.dtb \ spear310-evb.dtb \ spear320-evb.dtb dtb-$(CONFIG_ARCH_SPEAR6XX)+= spear600-evb.dtb +dtb-$(CONFIG_ARCH_SUNXI) += sun5i-olinuxino.dtb dtb-$(CONFIG_ARCH_TEGRA) += tegra20-harmony.dtb \ tegra20-medcom-wide.dtb \ tegra20-paz00.dtb \ diff --git a/arch/arm/boot/dts/sun5i-olinuxino.dts b/arch/arm/boot/dts/sun5i-olinuxino.dts new file mode 100644 index 0000000..3b1cce3 --- /dev/null +++ b/arch/arm/boot/dts/sun5i-olinuxino.dts @@ -0,0 +1,26 @@ +/* + * Copyright 2012 Maxime Ripard + * + * Maxime Ripard + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; +/include/ "sun5i.dtsi" + +/ { + model = "Olimex A13-Olinuxino"; + compatible = "olimex,a13-olinuxino", "allwinner,sun5i"; + + soc { + duart: uart@01c28400 { + status = "okay"; + }; + }; +}; diff --git a/arch/arm/boot/dts/sun5i.dtsi b/arch/arm/boot/dts/sun5i.dtsi new file mode 100644 index 0000000..4bedf3e --- /dev/null +++ b/arch/arm/boot/dts/sun5i.dtsi @@ -0,0 +1,74 @@ +/* + * Copyright 2012 Maxime Ripard + * + * Maxime Ripard + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/include/ "skeleton.dtsi" + +/ { + interrupt-parent = <&intc>; + + cpus { + cpu@0 { + compatible = "arm,cortex-a8"; + }; + }; + + chosen { + bootargs = "earlyprintk console=ttyS0,115200"; + }; + + memory { + reg = <0x40000000 0x20000000>; + }; + + clocks { + #address-cells = <1>; + #size-cells = <0>; + + osc: oscillator { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <24000000>; + }; + }; + + soc { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x01c20000 0x300000>; + ranges; + + timer@01c20c00 { + compatible = "allwinner,sunxi-timer"; + reg = <0x01c20c00 0x400>; + interrupts = <22>; + clocks = <&osc>; + }; + + intc: interrupt-controller@01c20400 { + compatible = "allwinner,sunxi-ic"; + reg = <0x01c20400 0x400>; + interrupt-controller; + #interrupt-cells = <1>; + }; + + uart1: uart@01c28400 { + compatible = "ns8250"; + reg = <0x01c28400 0x400>; + interrupts = <2>; + reg-shift = <2>; + clock-frequency = <24000000>; + status = "disabled"; + }; + }; +}; -- cgit v0.10.2 From 1b106699647b56313bac707e12e7ad67180cb147 Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Thu, 15 Nov 2012 21:51:26 +0100 Subject: ARM: sunxi: Add entry to MAINTAINERS Signed-off-by: Maxime Ripard diff --git a/MAINTAINERS b/MAINTAINERS index 59203e7..7dbfcb7 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -685,6 +685,12 @@ M: Lennert Buytenhek L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) S: Maintained +ARM/Allwinner A1X SoC support +M: Maxime Ripard +L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) +S: Maintained +F: arch/arm/mach-sunxi/ + ARM/ATMEL AT91RM9200 AND AT91SAM ARM ARCHITECTURES M: Andrew Victor M: Nicolas Ferre -- cgit v0.10.2 From 6edc794a5ff245faf60488d32e9fdbeb0aad2223 Mon Sep 17 00:00:00 2001 From: Tomasz Figa Date: Wed, 7 Nov 2012 08:44:59 +0900 Subject: pinctrl: samsung: Add support for EXYNOS4X12 This patch extends the driver with any necessary SoC-specific definitions to support EXYNOS4X12 SoCs. Signed-off-by: Tomasz Figa Signed-off-by: Kyungmin Park Acked-by: Thomas Abraham Acked-by: Linus Walleij Signed-off-by: Kukjin Kim diff --git a/Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt index 63806e2..e97a278 100644 --- a/Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt +++ b/Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt @@ -8,6 +8,7 @@ on-chip controllers onto these pads. Required Properties: - compatible: should be one of the following. - "samsung,pinctrl-exynos4210": for Exynos4210 compatible pin-controller. + - "samsung,pinctrl-exynos4x12": for Exynos4x12 compatible pin-controller. - "samsung,pinctrl-exynos5250": for Exynos5250 compatible pin-controller. - reg: Base address of the pin controller hardware module and length of diff --git a/drivers/pinctrl/pinctrl-exynos.c b/drivers/pinctrl/pinctrl-exynos.c index 73a0aa2..19fab68 100644 --- a/drivers/pinctrl/pinctrl-exynos.c +++ b/drivers/pinctrl/pinctrl-exynos.c @@ -566,3 +566,113 @@ struct samsung_pin_ctrl exynos4210_pin_ctrl[] = { .label = "exynos4210-gpio-ctrl2", }, }; + +/* pin banks of exynos4x12 pin-controller 0 */ +static struct samsung_pin_bank exynos4x12_pin_banks0[] = { + EXYNOS_PIN_BANK_EINTG(8, 0x000, "gpa0", 0x00), + EXYNOS_PIN_BANK_EINTG(6, 0x020, "gpa1", 0x04), + EXYNOS_PIN_BANK_EINTG(8, 0x040, "gpb", 0x08), + EXYNOS_PIN_BANK_EINTG(5, 0x060, "gpc0", 0x0c), + EXYNOS_PIN_BANK_EINTG(5, 0x080, "gpc1", 0x10), + EXYNOS_PIN_BANK_EINTG(4, 0x0A0, "gpd0", 0x14), + EXYNOS_PIN_BANK_EINTG(4, 0x0C0, "gpd1", 0x18), + EXYNOS_PIN_BANK_EINTG(8, 0x180, "gpf0", 0x30), + EXYNOS_PIN_BANK_EINTG(8, 0x1A0, "gpf1", 0x34), + EXYNOS_PIN_BANK_EINTG(8, 0x1C0, "gpf2", 0x38), + EXYNOS_PIN_BANK_EINTG(6, 0x1E0, "gpf3", 0x3c), + EXYNOS_PIN_BANK_EINTG(8, 0x240, "gpj0", 0x40), + EXYNOS_PIN_BANK_EINTG(5, 0x260, "gpj1", 0x44), +}; + +/* pin banks of exynos4x12 pin-controller 1 */ +static struct samsung_pin_bank exynos4x12_pin_banks1[] = { + EXYNOS_PIN_BANK_EINTG(7, 0x040, "gpk0", 0x08), + EXYNOS_PIN_BANK_EINTG(7, 0x060, "gpk1", 0x0c), + EXYNOS_PIN_BANK_EINTG(7, 0x080, "gpk2", 0x10), + EXYNOS_PIN_BANK_EINTG(7, 0x0A0, "gpk3", 0x14), + EXYNOS_PIN_BANK_EINTG(7, 0x0C0, "gpl0", 0x18), + EXYNOS_PIN_BANK_EINTG(2, 0x0E0, "gpl1", 0x1c), + EXYNOS_PIN_BANK_EINTG(8, 0x100, "gpl2", 0x20), + EXYNOS_PIN_BANK_EINTG(8, 0x260, "gpm0", 0x24), + EXYNOS_PIN_BANK_EINTG(7, 0x280, "gpm1", 0x28), + EXYNOS_PIN_BANK_EINTG(5, 0x2A0, "gpm2", 0x2c), + EXYNOS_PIN_BANK_EINTG(8, 0x2C0, "gpm3", 0x30), + EXYNOS_PIN_BANK_EINTG(8, 0x2E0, "gpm4", 0x34), + EXYNOS_PIN_BANK_EINTN(6, 0x120, "gpy0"), + EXYNOS_PIN_BANK_EINTN(4, 0x140, "gpy1"), + EXYNOS_PIN_BANK_EINTN(6, 0x160, "gpy2"), + EXYNOS_PIN_BANK_EINTN(8, 0x180, "gpy3"), + EXYNOS_PIN_BANK_EINTN(8, 0x1A0, "gpy4"), + EXYNOS_PIN_BANK_EINTN(8, 0x1C0, "gpy5"), + EXYNOS_PIN_BANK_EINTN(8, 0x1E0, "gpy6"), + EXYNOS_PIN_BANK_EINTW(8, 0xC00, "gpx0", 0x00), + EXYNOS_PIN_BANK_EINTW(8, 0xC20, "gpx1", 0x04), + EXYNOS_PIN_BANK_EINTW(8, 0xC40, "gpx2", 0x08), + EXYNOS_PIN_BANK_EINTW(8, 0xC60, "gpx3", 0x0c), +}; + +/* pin banks of exynos4x12 pin-controller 2 */ +static struct samsung_pin_bank exynos4x12_pin_banks2[] = { + EXYNOS_PIN_BANK_EINTG(7, 0x000, "gpz", 0x00), +}; + +/* pin banks of exynos4x12 pin-controller 3 */ +static struct samsung_pin_bank exynos4x12_pin_banks3[] = { + EXYNOS_PIN_BANK_EINTG(8, 0x000, "gpv0", 0x00), + EXYNOS_PIN_BANK_EINTG(8, 0x020, "gpv1", 0x04), + EXYNOS_PIN_BANK_EINTG(8, 0x040, "gpv2", 0x08), + EXYNOS_PIN_BANK_EINTG(8, 0x060, "gpv3", 0x0c), + EXYNOS_PIN_BANK_EINTG(2, 0x080, "gpv4", 0x10), +}; + +/* + * Samsung pinctrl driver data for Exynos4x12 SoC. Exynos4x12 SoC includes + * four gpio/pin-mux/pinconfig controllers. + */ +struct samsung_pin_ctrl exynos4x12_pin_ctrl[] = { + { + /* pin-controller instance 0 data */ + .pin_banks = exynos4x12_pin_banks0, + .nr_banks = ARRAY_SIZE(exynos4x12_pin_banks0), + .geint_con = EXYNOS_GPIO_ECON_OFFSET, + .geint_mask = EXYNOS_GPIO_EMASK_OFFSET, + .geint_pend = EXYNOS_GPIO_EPEND_OFFSET, + .svc = EXYNOS_SVC_OFFSET, + .eint_gpio_init = exynos_eint_gpio_init, + .label = "exynos4x12-gpio-ctrl0", + }, { + /* pin-controller instance 1 data */ + .pin_banks = exynos4x12_pin_banks1, + .nr_banks = ARRAY_SIZE(exynos4x12_pin_banks1), + .geint_con = EXYNOS_GPIO_ECON_OFFSET, + .geint_mask = EXYNOS_GPIO_EMASK_OFFSET, + .geint_pend = EXYNOS_GPIO_EPEND_OFFSET, + .weint_con = EXYNOS_WKUP_ECON_OFFSET, + .weint_mask = EXYNOS_WKUP_EMASK_OFFSET, + .weint_pend = EXYNOS_WKUP_EPEND_OFFSET, + .svc = EXYNOS_SVC_OFFSET, + .eint_gpio_init = exynos_eint_gpio_init, + .eint_wkup_init = exynos_eint_wkup_init, + .label = "exynos4x12-gpio-ctrl1", + }, { + /* pin-controller instance 2 data */ + .pin_banks = exynos4x12_pin_banks2, + .nr_banks = ARRAY_SIZE(exynos4x12_pin_banks2), + .geint_con = EXYNOS_GPIO_ECON_OFFSET, + .geint_mask = EXYNOS_GPIO_EMASK_OFFSET, + .geint_pend = EXYNOS_GPIO_EPEND_OFFSET, + .svc = EXYNOS_SVC_OFFSET, + .eint_gpio_init = exynos_eint_gpio_init, + .label = "exynos4x12-gpio-ctrl2", + }, { + /* pin-controller instance 3 data */ + .pin_banks = exynos4x12_pin_banks3, + .nr_banks = ARRAY_SIZE(exynos4x12_pin_banks3), + .geint_con = EXYNOS_GPIO_ECON_OFFSET, + .geint_mask = EXYNOS_GPIO_EMASK_OFFSET, + .geint_pend = EXYNOS_GPIO_EPEND_OFFSET, + .svc = EXYNOS_SVC_OFFSET, + .eint_gpio_init = exynos_eint_gpio_init, + .label = "exynos4x12-gpio-ctrl3", + }, +}; diff --git a/drivers/pinctrl/pinctrl-samsung.c b/drivers/pinctrl/pinctrl-samsung.c index fc34cac..81c9896 100644 --- a/drivers/pinctrl/pinctrl-samsung.c +++ b/drivers/pinctrl/pinctrl-samsung.c @@ -947,6 +947,8 @@ static int __devinit samsung_pinctrl_probe(struct platform_device *pdev) static const struct of_device_id samsung_pinctrl_dt_match[] = { { .compatible = "samsung,pinctrl-exynos4210", .data = (void *)exynos4210_pin_ctrl }, + { .compatible = "samsung,pinctrl-exynos4x12", + .data = (void *)exynos4x12_pin_ctrl }, {}, }; MODULE_DEVICE_TABLE(of, samsung_pinctrl_dt_match); diff --git a/drivers/pinctrl/pinctrl-samsung.h b/drivers/pinctrl/pinctrl-samsung.h index 0670d9e..5addfd1 100644 --- a/drivers/pinctrl/pinctrl-samsung.h +++ b/drivers/pinctrl/pinctrl-samsung.h @@ -236,5 +236,6 @@ struct samsung_pmx_func { /* list of all exported SoC specific data */ extern struct samsung_pin_ctrl exynos4210_pin_ctrl[]; +extern struct samsung_pin_ctrl exynos4x12_pin_ctrl[]; #endif /* __PINCTRL_SAMSUNG_H */ -- cgit v0.10.2 From 4a991b410cd7940c48f261e854e8698923e23fd2 Mon Sep 17 00:00:00 2001 From: Tushar Behera Date: Mon, 19 Nov 2012 09:45:19 +0900 Subject: pinctrl: samsung: Update error check for unsigned variables Checking '< 0' for unsigned variables always returns false. For error codes, use IS_ERR_VALUE() instead. Acked-by: Linus Walleij Signed-off-by: Tushar Behera Signed-off-by: Kukjin Kim diff --git a/drivers/pinctrl/pinctrl-samsung.c b/drivers/pinctrl/pinctrl-samsung.c index 81c9896..3b52c17 100644 --- a/drivers/pinctrl/pinctrl-samsung.c +++ b/drivers/pinctrl/pinctrl-samsung.c @@ -560,7 +560,7 @@ static int __devinit samsung_pinctrl_parse_dt_pins(struct platform_device *pdev, const char *pin_name; *npins = of_property_count_strings(cfg_np, "samsung,pins"); - if (*npins < 0) { + if (IS_ERR_VALUE(*npins)) { dev_err(dev, "invalid pin list in %s node", cfg_np->name); return -EINVAL; } -- cgit v0.10.2 From 8ac49e0485bb79223a111b366a3b1f5ec9148729 Mon Sep 17 00:00:00 2001 From: Christian Daudt Date: Mon, 19 Nov 2012 09:46:10 -0800 Subject: Add support for generic BCM SoC chipsets In order to start upstreaming Broadcom SoC support, create a starting hierarchy, arch and dts files. The first support SoC family that is planned is the BCM281XX (BCM11130/11140/11351/28145/28155) family of dual A9 mobile SoC cores. This code is just the skeleton code for get the machine upstreamed. It has been made MULTIPLATFORM compatible. Next steps ---------- Upstream a basic set of drivers - sufficient for a console boot to ramdisk. These will includer timer, gpio, i2c drivers. After this basic set, we will proceed with a more comprehensive set of drivers for the 281XX SoC family. v2 patch mods -------- - Remove l2x0_of_init call as there were problems with the code. A separate patch will be submitted with cache init code - Rename capri files and refs to bcm281xx-based names - Add bcm281xx binding doc - various misc cleanups v3 patch mods ------------- - Remove extra #include lines - Remove remaining references to capri - dt uart chipset string added - cleaned up chip # references v4 patch mods ------------- - swap order of compatible definitions for uart - fix typo v5 patch mods ------------- - Rename bcm281xx to bcm11351 in dts+code, leaving references to bcm281xx only in help+comments. v6 patch mods ------------- - fix typo in uart 'compatible' string Signed-off-by: Christian Daudt Reviewed-by: Stephen Warren Signed-off-by: Olof Johansson diff --git a/Documentation/devicetree/bindings/arm/bcm/bcm11351.txt b/Documentation/devicetree/bindings/arm/bcm/bcm11351.txt new file mode 100644 index 0000000..fb7b5cd --- /dev/null +++ b/Documentation/devicetree/bindings/arm/bcm/bcm11351.txt @@ -0,0 +1,9 @@ +Broadcom BCM11351 device tree bindings +------------------------------------------- + +Boards with the bcm281xx SoC family (which includes bcm11130, bcm11140, +bcm11351, bcm28145, bcm28155 SoCs) shall have the following properties: + +Required root node property: + +compatible = "bcm,bcm11351"; diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index e9b6b9e..c1cc4f7 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -1009,6 +1009,8 @@ source "arch/arm/mach-mvebu/Kconfig" source "arch/arm/mach-at91/Kconfig" +source "arch/arm/mach-bcm/Kconfig" + source "arch/arm/mach-clps711x/Kconfig" source "arch/arm/mach-cns3xxx/Kconfig" diff --git a/arch/arm/Makefile b/arch/arm/Makefile index 3353b76..2089121 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -137,6 +137,7 @@ textofs-$(CONFIG_ARCH_MSM8960) := 0x00208000 # Machine directory name. This list is sorted alphanumerically # by CONFIG_* macro name. machine-$(CONFIG_ARCH_AT91) += at91 +machine-$(CONFIG_ARCH_BCM) += bcm machine-$(CONFIG_ARCH_BCM2835) += bcm2835 machine-$(CONFIG_ARCH_CLPS711X) += clps711x machine-$(CONFIG_ARCH_CNS3XXX) += cns3xxx diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 5cc9566..cc803c9 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -17,6 +17,7 @@ dtb-$(CONFIG_ARCH_AT91) += aks-cdu.dtb \ usb_a9263.dtb \ usb_a9g20.dtb dtb-$(CONFIG_ARCH_BCM2835) += bcm2835-rpi-b.dtb +dtb-$(CONFIG_ARCH_BCM) += bcm11351-brt.dtb dtb-$(CONFIG_ARCH_DOVE) += dove-cm-a510.dtb \ dove-cubox.dtb \ dove-dove-db.dtb diff --git a/arch/arm/boot/dts/bcm11351-brt.dts b/arch/arm/boot/dts/bcm11351-brt.dts new file mode 100644 index 0000000..248067c --- /dev/null +++ b/arch/arm/boot/dts/bcm11351-brt.dts @@ -0,0 +1,30 @@ +/* + * Copyright (C) 2012 Broadcom Corporation + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +/dts-v1/; + +/include/ "bcm11351.dtsi" + +/ { + model = "BCM11351 BRT board"; + compatible = "bcm,bcm11351-brt", "bcm,bcm11351"; + + memory { + reg = <0x80000000 0x40000000>; /* 1 GB */ + }; + + uart@3e000000 { + status = "okay"; + }; + +}; diff --git a/arch/arm/boot/dts/bcm11351.dtsi b/arch/arm/boot/dts/bcm11351.dtsi new file mode 100644 index 0000000..ad13588 --- /dev/null +++ b/arch/arm/boot/dts/bcm11351.dtsi @@ -0,0 +1,50 @@ +/* + * Copyright (C) 2012 Broadcom Corporation + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +/include/ "skeleton.dtsi" + +/ { + model = "BCM11351 SoC"; + compatible = "bcm,bcm11351"; + interrupt-parent = <&gic>; + + chosen { + bootargs = "console=ttyS0,115200n8"; + }; + + gic: interrupt-controller@3ff00100 { + compatible = "arm,cortex-a9-gic"; + #interrupt-cells = <3>; + #address-cells = <0>; + interrupt-controller; + reg = <0x3ff01000 0x1000>, + <0x3ff00100 0x100>; + }; + + uart@3e000000 { + compatible = "bcm,bcm11351-dw-apb-uart", "snps,dw-apb-uart"; + status = "disabled"; + reg = <0x3e000000 0x1000>; + clock-frequency = <13000000>; + interrupts = <0x0 67 0x4>; + reg-shift = <2>; + reg-io-width = <4>; + }; + + L2: l2-cache { + compatible = "arm,pl310-cache"; + reg = <0x3ff20000 0x1000>; + cache-unified; + cache-level = <2>; + }; +}; diff --git a/arch/arm/configs/bcm_defconfig b/arch/arm/configs/bcm_defconfig new file mode 100644 index 0000000..e3bf2d6 --- /dev/null +++ b/arch/arm/configs/bcm_defconfig @@ -0,0 +1,114 @@ +CONFIG_EXPERIMENTAL=y +# CONFIG_LOCALVERSION_AUTO is not set +# CONFIG_SWAP is not set +CONFIG_SYSVIPC=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_BSD_PROCESS_ACCT=y +CONFIG_BSD_PROCESS_ACCT_V3=y +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_LOG_BUF_SHIFT=19 +CONFIG_CGROUPS=y +CONFIG_CGROUP_FREEZER=y +CONFIG_CGROUP_DEVICE=y +CONFIG_CGROUP_CPUACCT=y +CONFIG_RESOURCE_COUNTERS=y +CONFIG_CGROUP_SCHED=y +CONFIG_BLK_CGROUP=y +CONFIG_NAMESPACES=y +CONFIG_BLK_DEV_INITRD=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_EMBEDDED=y +# CONFIG_COMPAT_BRK is not set +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_BLK_DEV_BSG is not set +CONFIG_PARTITION_ADVANCED=y +CONFIG_EFI_PARTITION=y +CONFIG_ARCH_BCM=y +CONFIG_ARM_THUMBEE=y +CONFIG_ARM_ERRATA_743622=y +CONFIG_PREEMPT=y +CONFIG_AEABI=y +# CONFIG_OABI_COMPAT is not set +# CONFIG_COMPACTION is not set +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_ARM_APPENDED_DTB=y +CONFIG_CMDLINE="console=ttyS0,115200n8 mem=128M" +CONFIG_CPU_IDLE=y +CONFIG_VFP=y +CONFIG_NEON=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +CONFIG_PM_RUNTIME=y +CONFIG_DEVTMPFS=y +CONFIG_DEVTMPFS_MOUNT=y +CONFIG_PROC_DEVICETREE=y +# CONFIG_BLK_DEV is not set +CONFIG_SCSI=y +CONFIG_BLK_DEV_SD=y +CONFIG_CHR_DEV_SG=y +CONFIG_SCSI_MULTI_LUN=y +CONFIG_SCSI_SCAN_ASYNC=y +CONFIG_INPUT_FF_MEMLESS=y +CONFIG_INPUT_JOYDEV=y +CONFIG_INPUT_EVDEV=y +# CONFIG_KEYBOARD_ATKBD is not set +# CONFIG_INPUT_MOUSE is not set +CONFIG_INPUT_TOUCHSCREEN=y +CONFIG_INPUT_MISC=y +CONFIG_INPUT_UINPUT=y +# CONFIG_SERIO is not set +# CONFIG_LEGACY_PTYS is not set +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_EXTENDED=y +CONFIG_SERIAL_8250_MANY_PORTS=y +CONFIG_SERIAL_8250_SHARE_IRQ=y +CONFIG_SERIAL_8250_RSA=y +CONFIG_SERIAL_8250_DW=y +CONFIG_HW_RANDOM=y +CONFIG_I2C=y +CONFIG_I2C_CHARDEV=y +# CONFIG_HWMON is not set +CONFIG_VIDEO_OUTPUT_CONTROL=y +CONFIG_FB=y +CONFIG_BACKLIGHT_LCD_SUPPORT=y +CONFIG_LCD_CLASS_DEVICE=y +CONFIG_BACKLIGHT_CLASS_DEVICE=y +# CONFIG_USB_SUPPORT is not set +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y +CONFIG_LEDS_TRIGGERS=y +CONFIG_LEDS_TRIGGER_TIMER=y +CONFIG_LEDS_TRIGGER_HEARTBEAT=y +CONFIG_LEDS_TRIGGER_DEFAULT_ON=y +CONFIG_EXT4_FS=y +CONFIG_EXT4_FS_POSIX_ACL=y +CONFIG_EXT4_FS_SECURITY=y +CONFIG_AUTOFS4_FS=y +CONFIG_FUSE_FS=y +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_TMPFS=y +CONFIG_TMPFS_POSIX_ACL=y +CONFIG_CONFIGFS_FS=y +# CONFIG_MISC_FILESYSTEMS is not set +CONFIG_NLS_CODEPAGE_437=y +CONFIG_NLS_ISO8859_1=y +CONFIG_PRINTK_TIME=y +CONFIG_MAGIC_SYSRQ=y +CONFIG_DEBUG_FS=y +CONFIG_DETECT_HUNG_TASK=y +CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=110 +CONFIG_BOOTPARAM_HUNG_TASK_PANIC=y +CONFIG_DEBUG_INFO=y +# CONFIG_FTRACE is not set +CONFIG_DEBUG_LL=y +CONFIG_CRC_CCITT=y +CONFIG_CRC_T10DIF=y +CONFIG_CRC_ITU_T=y +CONFIG_CRC7=y +CONFIG_XZ_DEC=y +CONFIG_AVERAGE=y diff --git a/arch/arm/mach-bcm/Kconfig b/arch/arm/mach-bcm/Kconfig new file mode 100644 index 0000000..48705c1 --- /dev/null +++ b/arch/arm/mach-bcm/Kconfig @@ -0,0 +1,19 @@ +config ARCH_BCM + bool "Broadcom SoC" if ARCH_MULTI_V7 + depends on MMU + select ARCH_REQUIRE_GPIOLIB + select ARM_ERRATA_754322 + select ARM_ERRATA_764369 if SMP + select ARM_GIC + select CPU_V7 + select GENERIC_CLOCKEVENTS + select GENERIC_GPIO + select GENERIC_TIME + select GPIO_BCM + select SPARSE_IRQ + select TICK_ONESHOT + help + This enables support for system based on Broadcom SoCs. + It currently supports the 'BCM281XX' family, which includes + BCM11130, BCM11140, BCM11351, BCM28145 and + BCM28155 variants. diff --git a/arch/arm/mach-bcm/Makefile b/arch/arm/mach-bcm/Makefile new file mode 100644 index 0000000..bbf4122 --- /dev/null +++ b/arch/arm/mach-bcm/Makefile @@ -0,0 +1,13 @@ +# +# Copyright (C) 2012 Broadcom Corporation +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation version 2. +# +# This program is distributed "as is" WITHOUT ANY WARRANTY of any +# kind, whether express or implied; without even the implied warranty +# of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. + +obj-$(CONFIG_ARCH_BCM) := board_bcm.o diff --git a/arch/arm/mach-bcm/board_bcm.c b/arch/arm/mach-bcm/board_bcm.c new file mode 100644 index 0000000..3a62f1b --- /dev/null +++ b/arch/arm/mach-bcm/board_bcm.c @@ -0,0 +1,57 @@ +/* + * Copyright (C) 2012 Broadcom Corporation + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include +#include +#include +#include +#include + +#include +#include + +#include + +static const struct of_device_id irq_match[] = { + {.compatible = "arm,cortex-a9-gic", .data = gic_of_init, }, + {} +}; + +static void timer_init(void) +{ +} + +static struct sys_timer timer = { + .init = timer_init, +}; + +static void __init init_irq(void) +{ + of_irq_init(irq_match); +} + +static void __init board_init(void) +{ + of_platform_populate(NULL, of_default_bus_match_table, NULL, + &platform_bus); +} + +static const char * const bcm11351_dt_compat[] = { "bcm,bcm11351", NULL, }; + +DT_MACHINE_START(BCM11351_DT, "Broadcom Application Processor") + .init_irq = init_irq, + .timer = &timer, + .init_machine = board_init, + .dt_compat = bcm11351_dt_compat, + .handle_irq = gic_handle_irq, +MACHINE_END -- cgit v0.10.2 From de0bf33fc2b0b1d4b1419adf645fb36e9e52781a Mon Sep 17 00:00:00 2001 From: Stefan Roese Date: Mon, 19 Nov 2012 12:09:40 +0100 Subject: ARM: sunxi: Restructure sunxi dts/dtsi files For the new sun4i/Cubieboard (A10) support, lets re-strucure the sun5i dts files to make it more generic. Those are the new dts/dtsi files: sunxi.dtsi - Devices common to all Allwinner sunXi SoC's sun4i.dtsi - sun4i Devices, will include sunxi.dtsi sun5i.dtsi - sun5i Devices, will include sunxi.dtsi board.dts - will include either sun4i.dtsi or sun5i.dtsi Additionally the "duart" label in the olinuxino.dts is changed to "uart1". Signed-off-by: Stefan Roese Acked-by: Arnd Bergmann Signed-off-by: Maxime Ripard diff --git a/arch/arm/boot/dts/sun5i-olinuxino.dts b/arch/arm/boot/dts/sun5i-olinuxino.dts index 3b1cce3..d6ff889 100644 --- a/arch/arm/boot/dts/sun5i-olinuxino.dts +++ b/arch/arm/boot/dts/sun5i-olinuxino.dts @@ -18,8 +18,12 @@ model = "Olimex A13-Olinuxino"; compatible = "olimex,a13-olinuxino", "allwinner,sun5i"; + chosen { + bootargs = "earlyprintk console=ttyS0,115200"; + }; + soc { - duart: uart@01c28400 { + uart1: uart@01c28400 { status = "okay"; }; }; diff --git a/arch/arm/boot/dts/sun5i.dtsi b/arch/arm/boot/dts/sun5i.dtsi index 4bedf3e..59a2d26 100644 --- a/arch/arm/boot/dts/sun5i.dtsi +++ b/arch/arm/boot/dts/sun5i.dtsi @@ -11,64 +11,10 @@ * http://www.gnu.org/copyleft/gpl.html */ -/include/ "skeleton.dtsi" +/include/ "sunxi.dtsi" / { - interrupt-parent = <&intc>; - - cpus { - cpu@0 { - compatible = "arm,cortex-a8"; - }; - }; - - chosen { - bootargs = "earlyprintk console=ttyS0,115200"; - }; - memory { reg = <0x40000000 0x20000000>; }; - - clocks { - #address-cells = <1>; - #size-cells = <0>; - - osc: oscillator { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <24000000>; - }; - }; - - soc { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - reg = <0x01c20000 0x300000>; - ranges; - - timer@01c20c00 { - compatible = "allwinner,sunxi-timer"; - reg = <0x01c20c00 0x400>; - interrupts = <22>; - clocks = <&osc>; - }; - - intc: interrupt-controller@01c20400 { - compatible = "allwinner,sunxi-ic"; - reg = <0x01c20400 0x400>; - interrupt-controller; - #interrupt-cells = <1>; - }; - - uart1: uart@01c28400 { - compatible = "ns8250"; - reg = <0x01c28400 0x400>; - interrupts = <2>; - reg-shift = <2>; - clock-frequency = <24000000>; - status = "disabled"; - }; - }; }; diff --git a/arch/arm/boot/dts/sunxi.dtsi b/arch/arm/boot/dts/sunxi.dtsi new file mode 100644 index 0000000..9e476de --- /dev/null +++ b/arch/arm/boot/dts/sunxi.dtsi @@ -0,0 +1,66 @@ +/* + * Copyright 2012 Maxime Ripard + * + * Maxime Ripard + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/include/ "skeleton.dtsi" + +/ { + interrupt-parent = <&intc>; + + cpus { + cpu@0 { + compatible = "arm,cortex-a8"; + }; + }; + + clocks { + #address-cells = <1>; + #size-cells = <0>; + + osc: oscillator { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <24000000>; + }; + }; + + soc { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x01c20000 0x300000>; + ranges; + + timer@01c20c00 { + compatible = "allwinner,sunxi-timer"; + reg = <0x01c20c00 0x400>; + interrupts = <22>; + clocks = <&osc>; + }; + + intc: interrupt-controller@01c20400 { + compatible = "allwinner,sunxi-ic"; + reg = <0x01c20400 0x400>; + interrupt-controller; + #interrupt-cells = <1>; + }; + + uart1: uart@01c28400 { + compatible = "ns8250"; + reg = <0x01c28400 0x400>; + interrupts = <2>; + reg-shift = <2>; + clock-frequency = <24000000>; + status = "disabled"; + }; + }; +}; -- cgit v0.10.2 From aa25115aff14a149a6b611fe54776c142e483781 Mon Sep 17 00:00:00 2001 From: Stefan Roese Date: Mon, 19 Nov 2012 12:09:41 +0100 Subject: ARM: sunxi: Add earlyprintk support for UART0 (sun4i) Signed-off-by: Stefan Roese Acked-by: Arnd Bergmann Signed-off-by: Maxime Ripard diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug index f12bc3a..cc1ed35 100644 --- a/arch/arm/Kconfig.debug +++ b/arch/arm/Kconfig.debug @@ -345,6 +345,13 @@ choice Say Y here if you want kernel low-level debugging support on SOCFPGA based platforms. + config DEBUG_SUNXI_UART0 + bool "Kernel low-level debugging messages via sunXi UART0" + depends on ARCH_SUNXI + help + Say Y here if you want kernel low-level debugging support + on Allwinner A1X based platforms on the UART0. + config DEBUG_SUNXI_UART1 bool "Kernel low-level debugging messages via sunXi UART1" depends on ARCH_SUNXI @@ -423,7 +430,7 @@ config DEBUG_LL_INCLUDE default "debug/mvebu.S" if DEBUG_MVEBU_UART default "debug/picoxcell.S" if DEBUG_PICOXCELL_UART default "debug/socfpga.S" if DEBUG_SOCFPGA_UART - default "debug/sunxi.S" if DEBUG_SUNXI_UART1 + default "debug/sunxi.S" if DEBUG_SUNXI_UART0 || DEBUG_SUNXI_UART1 default "debug/vexpress.S" if DEBUG_VEXPRESS_UART0_DETECT || \ DEBUG_VEXPRESS_UART0_CA9 || DEBUG_VEXPRESS_UART0_RS1 default "mach/debug-macro.S" diff --git a/arch/arm/include/debug/sunxi.S b/arch/arm/include/debug/sunxi.S index 3bf61ca..04eb56d 100644 --- a/arch/arm/include/debug/sunxi.S +++ b/arch/arm/include/debug/sunxi.S @@ -10,7 +10,10 @@ * published by the Free Software Foundation. */ -#ifdef CONFIG_DEBUG_SUNXI_UART1 +#if defined(CONFIG_DEBUG_SUNXI_UART0) +#define SUNXI_UART_DEBUG_PHYS_BASE 0x01c28000 +#define SUNXI_UART_DEBUG_VIRT_BASE 0xf1c28000 +#elif defined(CONFIG_DEBUG_SUNXI_UART1) #define SUNXI_UART_DEBUG_PHYS_BASE 0x01c28400 #define SUNXI_UART_DEBUG_VIRT_BASE 0xf1c28400 #endif -- cgit v0.10.2 From f055f1f682b84b3b785813f5c11efacab6001253 Mon Sep 17 00:00:00 2001 From: Stefan Roese Date: Mon, 19 Nov 2012 12:09:42 +0100 Subject: ARM: sunxi: Add sun4i and cubieboard support This patch adds support for the Cubieboard based on the Allwinner A10/sun4i SoC. Currently only UART is supported. Other devices will eventually follow. Signed-off-by: Stefan Roese Acked-by: Arnd Bergmann Signed-off-by: Maxime Ripard diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 9b2d3f0..4dd567b 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -84,7 +84,8 @@ dtb-$(CONFIG_ARCH_SPEAR3XX)+= spear300-evb.dtb \ spear310-evb.dtb \ spear320-evb.dtb dtb-$(CONFIG_ARCH_SPEAR6XX)+= spear600-evb.dtb -dtb-$(CONFIG_ARCH_SUNXI) += sun5i-olinuxino.dtb +dtb-$(CONFIG_ARCH_SUNXI) += sun4i-cubieboard.dtb \ + sun5i-olinuxino.dtb dtb-$(CONFIG_ARCH_TEGRA) += tegra20-harmony.dtb \ tegra20-medcom-wide.dtb \ tegra20-paz00.dtb \ diff --git a/arch/arm/boot/dts/sun4i-cubieboard.dts b/arch/arm/boot/dts/sun4i-cubieboard.dts new file mode 100644 index 0000000..f4ca126 --- /dev/null +++ b/arch/arm/boot/dts/sun4i-cubieboard.dts @@ -0,0 +1,38 @@ +/* + * Copyright 2012 Stefan Roese + * Stefan Roese + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; +/include/ "sun4i.dtsi" + +/ { + model = "Cubietech Cubieboard"; + compatible = "cubietech,cubieboard", "allwinner,sun4i"; + + aliases { + serial0 = &uart0; + serial1 = &uart1; + }; + + chosen { + bootargs = "earlyprintk console=ttyS0,115200"; + }; + + soc { + uart0: uart@01c28000 { + status = "okay"; + }; + + uart1: uart@01c28400 { + status = "okay"; + }; + }; +}; diff --git a/arch/arm/boot/dts/sunxi.dtsi b/arch/arm/boot/dts/sunxi.dtsi index 9e476de..8284fbd 100644 --- a/arch/arm/boot/dts/sunxi.dtsi +++ b/arch/arm/boot/dts/sunxi.dtsi @@ -54,6 +54,15 @@ #interrupt-cells = <1>; }; + uart0: uart@01c28000 { + compatible = "ns8250"; + reg = <0x01c28000 0x400>; + interrupts = <1>; + reg-shift = <2>; + clock-frequency = <24000000>; + status = "disabled"; + }; + uart1: uart@01c28400 { compatible = "ns8250"; reg = <0x01c28400 0x400>; diff --git a/arch/arm/mach-sunxi/sunxi.c b/arch/arm/mach-sunxi/sunxi.c index 8f42df8..13d4d96 100644 --- a/arch/arm/mach-sunxi/sunxi.c +++ b/arch/arm/mach-sunxi/sunxi.c @@ -46,6 +46,7 @@ static void __init sunxi_dt_init(void) } static const char * const sunxi_board_dt_compat[] = { + "allwinner,sun4i", "allwinner,sun5i", NULL, }; -- cgit v0.10.2 From 200daa367c59b4952f1e86ed9761859b1bcc3dbd Mon Sep 17 00:00:00 2001 From: Alexander Shiyan Date: Sat, 17 Nov 2012 17:57:07 +0400 Subject: ARM: clps711x: Using platform_driver for ethernet device This patch removes static mappings for ethernet devices. Now we will use platform_driver for ethernet devices. Signed-off-by: Alexander Shiyan Signed-off-by: Olof Johansson diff --git a/arch/arm/mach-clps711x/Kconfig b/arch/arm/mach-clps711x/Kconfig index 263242d..2d00165 100644 --- a/arch/arm/mach-clps711x/Kconfig +++ b/arch/arm/mach-clps711x/Kconfig @@ -10,7 +10,6 @@ config ARCH_AUTCPU12 config ARCH_CDB89712 bool "CDB89712" - select ISA help This is an evaluation board from Cirrus for the CS89712 processor. The board includes 2 serial ports, Ethernet, IRDA, and expansion @@ -25,7 +24,6 @@ config ARCH_EDB7211 bool "EDB7211" select ARCH_SELECT_MEMORY_MODEL select ARCH_SPARSEMEM_ENABLE - select ISA help Say Y here if you intend to run this kernel on a Cirrus Logic EDB-7211 evaluation board. diff --git a/arch/arm/mach-clps711x/autcpu12.c b/arch/arm/mach-clps711x/autcpu12.c index 214547b..d9b7f94 100644 --- a/arch/arm/mach-clps711x/autcpu12.c +++ b/arch/arm/mach-clps711x/autcpu12.c @@ -24,6 +24,7 @@ #include #include #include +#include #include #include @@ -39,21 +40,13 @@ #include "common.h" -static struct map_desc autcpu12_io_desc[] __initdata = { - /* Memory-mapped extra io and CS8900A Ethernet chip */ - { - .virtual = IO_ADDRESS(AUTCPU12_PHYS_CS8900A), - .pfn = __phys_to_pfn(AUTCPU12_PHYS_CS8900A), - .length = SZ_1M, - .type = MT_DEVICE - } -}; +#define AUTCPU12_CS8900_BASE (CS2_PHYS_BASE + 0x300) +#define AUTCPU12_CS8900_IRQ (IRQ_EINT3) -void __init autcpu12_map_io(void) -{ - clps711x_map_io(); - iotable_init(autcpu12_io_desc, ARRAY_SIZE(autcpu12_io_desc)); -} +static struct resource autcpu12_cs8900_resource[] __initdata = { + DEFINE_RES_MEM(AUTCPU12_CS8900_BASE, SZ_1K), + DEFINE_RES_IRQ(AUTCPU12_CS8900_IRQ), +}; static struct resource autcpu12_nvram_resource[] __initdata = { DEFINE_RES_MEM_NAMED(AUTCPU12_PHYS_NVRAM, SZ_128K, "SRAM"), @@ -68,16 +61,18 @@ static struct platform_device autcpu12_nvram_pdev __initdata = { static void __init autcpu12_init(void) { + platform_device_register_simple("cs89x0", 0, autcpu12_cs8900_resource, + ARRAY_SIZE(autcpu12_cs8900_resource)); platform_device_register(&autcpu12_nvram_pdev); } MACHINE_START(AUTCPU12, "autronix autcpu12") /* Maintainer: Thomas Gleixner */ .atag_offset = 0x20000, - .init_machine = autcpu12_init, - .map_io = autcpu12_map_io, + .map_io = clps711x_map_io, .init_irq = clps711x_init_irq, .timer = &clps711x_timer, + .init_machine = autcpu12_init, .restart = clps711x_restart, MACHINE_END diff --git a/arch/arm/mach-clps711x/cdb89712.c b/arch/arm/mach-clps711x/cdb89712.c index d90d25c..235e625 100644 --- a/arch/arm/mach-clps711x/cdb89712.c +++ b/arch/arm/mach-clps711x/cdb89712.c @@ -23,6 +23,8 @@ #include #include #include +#include +#include #include #include @@ -34,30 +36,26 @@ #include "common.h" -/* - * Map the CS89712 Ethernet port. That should be moved to the - * ethernet driver, perhaps. - */ -static struct map_desc cdb89712_io_desc[] __initdata = { - { - .virtual = IO_ADDRESS(ETHER_PHYS_BASE), - .pfn = __phys_to_pfn(ETHER_PHYS_BASE), - .length = ETHER_SIZE, - .type = MT_DEVICE - } +#define CDB89712_CS8900_BASE (CS2_PHYS_BASE + 0x300) +#define CDB89712_CS8900_IRQ (IRQ_EINT3) + +static struct resource cdb89712_cs8900_resource[] __initdata = { + DEFINE_RES_MEM(CDB89712_CS8900_BASE, SZ_1K), + DEFINE_RES_IRQ(CDB89712_CS8900_IRQ), }; -static void __init cdb89712_map_io(void) +static void __init cdb89712_init(void) { - clps711x_map_io(); - iotable_init(cdb89712_io_desc, ARRAY_SIZE(cdb89712_io_desc)); + platform_device_register_simple("cs89x0", 0, cdb89712_cs8900_resource, + ARRAY_SIZE(cdb89712_cs8900_resource)); } MACHINE_START(CDB89712, "Cirrus-CDB89712") /* Maintainer: Ray Lehtiniemi */ .atag_offset = 0x100, - .map_io = cdb89712_map_io, + .map_io = clps711x_map_io, .init_irq = clps711x_init_irq, .timer = &clps711x_timer, + .init_machine = cdb89712_init, .restart = clps711x_restart, MACHINE_END diff --git a/arch/arm/mach-clps711x/edb7211.c b/arch/arm/mach-clps711x/edb7211.c index 88f4690..7add9ad 100644 --- a/arch/arm/mach-clps711x/edb7211.c +++ b/arch/arm/mach-clps711x/edb7211.c @@ -10,6 +10,8 @@ #include #include #include +#include +#include #include #include @@ -20,7 +22,15 @@ #include "common.h" -#define VIDEORAM_SIZE SZ_128K +#define VIDEORAM_SIZE SZ_128K + +#define EDB7211_CS8900_BASE (CS2_PHYS_BASE + 0x300) +#define EDB7211_CS8900_IRQ (IRQ_EINT3) + +static struct resource edb7211_cs8900_resource[] __initdata = { + DEFINE_RES_MEM(EDB7211_CS8900_BASE, SZ_1K), + DEFINE_RES_IRQ(EDB7211_CS8900_IRQ), +}; static struct map_desc edb7211_io_desc[] __initdata = { { /* Memory-mapped extra keyboard row */ @@ -28,11 +38,6 @@ static struct map_desc edb7211_io_desc[] __initdata = { .pfn = __phys_to_pfn(EP7211_PHYS_EXTKBD), .length = SZ_1M, .type = MT_DEVICE, - }, { /* CS8900A Ethernet chip */ - .virtual = IO_ADDRESS(EP7211_PHYS_CS8900A), - .pfn = __phys_to_pfn(EP7211_PHYS_CS8900A), - .length = SZ_1M, - .type = MT_DEVICE, }, { /* Flash bank 0 */ .virtual = IO_ADDRESS(EP7211_PHYS_FLASH1), .pfn = __phys_to_pfn(EP7211_PHYS_FLASH1), @@ -76,13 +81,20 @@ fixup_edb7211(struct tag *tags, char **cmdline, struct meminfo *mi) mi->nr_banks = 2; } +static void __init edb7211_init(void) +{ + platform_device_register_simple("cs89x0", 0, edb7211_cs8900_resource, + ARRAY_SIZE(edb7211_cs8900_resource)); +} + MACHINE_START(EDB7211, "CL-EDB7211 (EP7211 eval board)") /* Maintainer: Jon McClintock */ .atag_offset = VIDEORAM_SIZE + 0x100, .fixup = fixup_edb7211, - .map_io = edb7211_map_io, .reserve = edb7211_reserve, + .map_io = edb7211_map_io, .init_irq = clps711x_init_irq, .timer = &clps711x_timer, + .init_machine = edb7211_init, .restart = clps711x_restart, MACHINE_END diff --git a/arch/arm/mach-clps711x/include/mach/autcpu12.h b/arch/arm/mach-clps711x/include/mach/autcpu12.h index f95ce6f..b077abd 100644 --- a/arch/arm/mach-clps711x/include/mach/autcpu12.h +++ b/arch/arm/mach-clps711x/include/mach/autcpu12.h @@ -20,9 +20,6 @@ #ifndef __ASM_ARCH_AUTCPU12_H #define __ASM_ARCH_AUTCPU12_H -/* The CS8900A ethernet chip has its I/O registers wired to chip select 2 */ -#define AUTCPU12_PHYS_CS8900A CS2_PHYS_BASE - /* * The flash bank is wired to chip select 0 */ diff --git a/arch/arm/mach-clps711x/include/mach/hardware.h b/arch/arm/mach-clps711x/include/mach/hardware.h index 0a3df25..bd919e7 100644 --- a/arch/arm/mach-clps711x/include/mach/hardware.h +++ b/arch/arm/mach-clps711x/include/mach/hardware.h @@ -64,22 +64,11 @@ #define CS7_PHYS_BASE (0x00000000) #endif -#if defined (CONFIG_ARCH_CDB89712) - -#define ETHER_PHYS_BASE CS2_PHYS_BASE -#define ETHER_SIZE 0x1000 - -#endif - - #if defined (CONFIG_ARCH_EDB7211) /* The extra 8 lines of the keyboard matrix are wired to chip select 3 */ #define EP7211_PHYS_EXTKBD CS3_PHYS_BASE -/* The CS8900A ethernet chip has its I/O registers wired to chip select 2 */ -#define EP7211_PHYS_CS8900A CS2_PHYS_BASE - /* The two flash banks are wired to chip selects 0 and 1 */ #define EP7211_PHYS_FLASH1 CS0_PHYS_BASE #define EP7211_PHYS_FLASH2 CS1_PHYS_BASE -- cgit v0.10.2 From b3a076dd0270507e1976b141a2aa5c53b9b553d1 Mon Sep 17 00:00:00 2001 From: Alexander Shiyan Date: Sat, 17 Nov 2012 17:57:08 +0400 Subject: ARM: clps711x: p720t: Using "leds-gpio" driver for LED control Instead of manually create LED class device, we will use "leds-gpio" driver for LED control. Signed-off-by: Alexander Shiyan Signed-off-by: Olof Johansson diff --git a/arch/arm/mach-clps711x/common.h b/arch/arm/mach-clps711x/common.h index fc0f065..dc60cae 100644 --- a/arch/arm/mach-clps711x/common.h +++ b/arch/arm/mach-clps711x/common.h @@ -4,6 +4,9 @@ * Common bits. */ +#define CLPS711X_NR_GPIO (4 * 8 + 3) +#define CLPS711X_GPIO(prt, bit) ((prt) * 8 + (bit)) + struct sys_timer; extern void clps711x_map_io(void); diff --git a/arch/arm/mach-clps711x/p720t.c b/arch/arm/mach-clps711x/p720t.c index dd89950..8fe33b3 100644 --- a/arch/arm/mach-clps711x/p720t.c +++ b/arch/arm/mach-clps711x/p720t.c @@ -25,6 +25,7 @@ #include #include #include +#include #include #include @@ -38,6 +39,8 @@ #include "common.h" +#define GPIO_USERLED CLPS711X_GPIO(3, 0) + /* * Map the P720T system PLD. It occupies two address spaces: * 0x10000000 and 0x10400000. We map both regions as one. @@ -103,71 +106,34 @@ static void __init p720t_init_early(void) } } -/* - * LED controled by CPLD - */ -#if defined(CONFIG_NEW_LEDS) && defined(CONFIG_LEDS_CLASS) -static void p720t_led_set(struct led_classdev *cdev, - enum led_brightness b) -{ - u8 reg = clps_readb(PDDR); - - if (b != LED_OFF) - reg |= 0x1; - else - reg &= ~0x1; - - clps_writeb(reg, PDDR); -} - -static enum led_brightness p720t_led_get(struct led_classdev *cdev) -{ - u8 reg = clps_readb(PDDR); +static struct gpio_led p720t_gpio_leds[] = { + { + .name = "User LED", + .default_trigger = "heartbeat", + .gpio = GPIO_USERLED, + }, +}; - return (reg & 0x1) ? LED_FULL : LED_OFF; -} +static struct gpio_led_platform_data p720t_gpio_led_pdata __initdata = { + .leds = p720t_gpio_leds, + .num_leds = ARRAY_SIZE(p720t_gpio_leds), +}; -static int __init p720t_leds_init(void) +static void __init p720t_init_late(void) { - - struct led_classdev *cdev; - int ret; - - if (!machine_is_p720t()) - return -ENODEV; - - cdev = kzalloc(sizeof(*cdev), GFP_KERNEL); - if (!cdev) - return -ENOMEM; - - cdev->name = "p720t:0"; - cdev->brightness_set = p720t_led_set; - cdev->brightness_get = p720t_led_get; - cdev->default_trigger = "heartbeat"; - - ret = led_classdev_register(NULL, cdev); - if (ret < 0) { - kfree(cdev); - return ret; - } - - return 0; + platform_device_register_data(&platform_bus, "leds-gpio", 0, + &p720t_gpio_led_pdata, + sizeof(p720t_gpio_led_pdata)); } -/* - * Since we may have triggers on any subsystem, defer registration - * until after subsystem_init. - */ -fs_initcall(p720t_leds_init); -#endif - MACHINE_START(P720T, "ARM-Prospector720T") /* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */ .atag_offset = 0x100, .fixup = fixup_p720t, - .init_early = p720t_init_early, .map_io = p720t_map_io, + .init_early = p720t_init_early, .init_irq = clps711x_init_irq, .timer = &clps711x_timer, + .init_late = p720t_init_late, .restart = clps711x_restart, MACHINE_END -- cgit v0.10.2 From dd850f1223fe039ed649b34b1d2872b1f4221de9 Mon Sep 17 00:00:00 2001 From: Alexander Shiyan Date: Sat, 17 Nov 2012 17:57:09 +0400 Subject: ARM: clps711x: Transform clps711x-framebuffer to platform driver and use it clps711x-framebuffer driver needs to be updated and this is a first step to make driver better. With this patch we are convert clps711x-framebuffer to platform device and load this driver from board code. Signed-off-by: Alexander Shiyan Signed-off-by: Olof Johansson diff --git a/arch/arm/mach-clps711x/autcpu12.c b/arch/arm/mach-clps711x/autcpu12.c index d9b7f94..c20043b 100644 --- a/arch/arm/mach-clps711x/autcpu12.c +++ b/arch/arm/mach-clps711x/autcpu12.c @@ -61,6 +61,7 @@ static struct platform_device autcpu12_nvram_pdev __initdata = { static void __init autcpu12_init(void) { + platform_device_register_simple("video-clps711x", 0, NULL, 0); platform_device_register_simple("cs89x0", 0, autcpu12_cs8900_resource, ARRAY_SIZE(autcpu12_cs8900_resource)); platform_device_register(&autcpu12_nvram_pdev); diff --git a/arch/arm/mach-clps711x/edb7211.c b/arch/arm/mach-clps711x/edb7211.c index 7add9ad..59dec3b 100644 --- a/arch/arm/mach-clps711x/edb7211.c +++ b/arch/arm/mach-clps711x/edb7211.c @@ -83,6 +83,7 @@ fixup_edb7211(struct tag *tags, char **cmdline, struct meminfo *mi) static void __init edb7211_init(void) { + platform_device_register_simple("video-clps711x", 0, NULL, 0); platform_device_register_simple("cs89x0", 0, edb7211_cs8900_resource, ARRAY_SIZE(edb7211_cs8900_resource)); } diff --git a/arch/arm/mach-clps711x/p720t.c b/arch/arm/mach-clps711x/p720t.c index 8fe33b3..d95cb8a 100644 --- a/arch/arm/mach-clps711x/p720t.c +++ b/arch/arm/mach-clps711x/p720t.c @@ -119,6 +119,11 @@ static struct gpio_led_platform_data p720t_gpio_led_pdata __initdata = { .num_leds = ARRAY_SIZE(p720t_gpio_leds), }; +static void __init p720t_init(void) +{ + platform_device_register_simple("video-clps711x", 0, NULL, 0); +} + static void __init p720t_init_late(void) { platform_device_register_data(&platform_bus, "leds-gpio", 0, @@ -134,6 +139,7 @@ MACHINE_START(P720T, "ARM-Prospector720T") .init_early = p720t_init_early, .init_irq = clps711x_init_irq, .timer = &clps711x_timer, + .init_machine = p720t_init, .init_late = p720t_init_late, .restart = clps711x_restart, MACHINE_END diff --git a/drivers/video/clps711xfb.c b/drivers/video/clps711xfb.c index f994c8b..2ccbb9b 100644 --- a/drivers/video/clps711xfb.c +++ b/drivers/video/clps711xfb.c @@ -270,7 +270,7 @@ static const struct file_operations backlight_proc_fops = { .write = backlight_proc_write, }; -static void __init clps711x_guess_lcd_params(struct fb_info *info) +static void __devinit clps711x_guess_lcd_params(struct fb_info *info) { unsigned int lcdcon, syscon, size; unsigned long phys_base = PAGE_OFFSET; @@ -358,7 +358,7 @@ static void __init clps711x_guess_lcd_params(struct fb_info *info) info->fix.type = FB_TYPE_PACKED_PIXELS; } -int __init clps711xfb_init(void) +static int __devinit clps711x_fb_probe(struct platform_device *pdev) { int err = -ENOMEM; @@ -410,7 +410,7 @@ int __init clps711xfb_init(void) out: return err; } -static void __exit clps711xfb_exit(void) +static int __devexit clps711x_fb_remove(struct platform_device *pdev) { unregister_framebuffer(cfb); kfree(cfb); @@ -422,11 +422,20 @@ static void __exit clps711xfb_exit(void) PLD_LCDEN = 0; PLD_PWR &= ~(PLD_S4_ON|PLD_S3_ON|PLD_S2_ON|PLD_S1_ON); } + + return 0; } -module_init(clps711xfb_init); -module_exit(clps711xfb_exit); +static struct platform_driver clps711x_fb_driver = { + .driver = { + .name = "video-clps711x", + .owner = THIS_MODULE, + }, + .probe = clps711x_fb_probe, + .remove = __devexit_p(clps711x_fb_remove), +}; +module_platform_driver(clps711x_fb_driver); MODULE_AUTHOR("Russell King "); -MODULE_DESCRIPTION("CLPS711x framebuffer driver"); +MODULE_DESCRIPTION("CLPS711X framebuffer driver"); MODULE_LICENSE("GPL"); -- cgit v0.10.2 From 49a88052b02df16266f1afc0d665abda5ae9d685 Mon Sep 17 00:00:00 2001 From: Alexander Shiyan Date: Sat, 17 Nov 2012 17:57:10 +0400 Subject: ARM: clps711x: p720t: Unneeded inclusion of head-sa1100.S removed Signed-off-by: Alexander Shiyan Signed-off-by: Olof Johansson diff --git a/arch/arm/boot/compressed/Makefile b/arch/arm/boot/compressed/Makefile index a517153..3f9e9fe4d 100644 --- a/arch/arm/boot/compressed/Makefile +++ b/arch/arm/boot/compressed/Makefile @@ -45,11 +45,6 @@ ifeq ($(CONFIG_ARCH_SHARK),y) OBJS += head-shark.o ofw-shark.o endif -ifeq ($(CONFIG_ARCH_P720T),y) -# Borrow this code from SA1100 -OBJS += head-sa1100.o -endif - ifeq ($(CONFIG_ARCH_SA1100),y) OBJS += head-sa1100.o endif -- cgit v0.10.2 From 67bea88dd842deb3ed8327ad101970dbd615ddcb Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Mon, 19 Nov 2012 18:57:08 +0100 Subject: ARM: sunxi: Add sunxi restart function via onchip watchdog Signed-off-by: Stefan Roese Signed-off-by: Maxime Ripard diff --git a/Documentation/devicetree/bindings/watchdog/sunxi-wdt.txt b/Documentation/devicetree/bindings/watchdog/sunxi-wdt.txt new file mode 100644 index 0000000..0b27177 --- /dev/null +++ b/Documentation/devicetree/bindings/watchdog/sunxi-wdt.txt @@ -0,0 +1,13 @@ +Allwinner sunXi Watchdog timer + +Required properties: + +- compatible : should be "allwinner,sunxi-wdt" +- reg : Specifies base physical address and size of the registers. + +Example: + +wdt: watchdog@01c20c90 { + compatible = "allwinner,sunxi-wdt"; + reg = <0x01c20c90 0x10>; +}; diff --git a/arch/arm/boot/dts/sunxi.dtsi b/arch/arm/boot/dts/sunxi.dtsi index 8284fbd..8bbc2bf 100644 --- a/arch/arm/boot/dts/sunxi.dtsi +++ b/arch/arm/boot/dts/sunxi.dtsi @@ -42,11 +42,16 @@ timer@01c20c00 { compatible = "allwinner,sunxi-timer"; - reg = <0x01c20c00 0x400>; + reg = <0x01c20c00 0x90>; interrupts = <22>; clocks = <&osc>; }; + wdt: watchdog@01c20c90 { + compatible = "allwinner,sunxi-wdt"; + reg = <0x01c20c90 0x10>; + }; + intc: interrupt-controller@01c20400 { compatible = "allwinner,sunxi-ic"; reg = <0x01c20400 0x400>; diff --git a/arch/arm/mach-sunxi/sunxi.c b/arch/arm/mach-sunxi/sunxi.c index 13d4d96..dc634ae 100644 --- a/arch/arm/mach-sunxi/sunxi.c +++ b/arch/arm/mach-sunxi/sunxi.c @@ -12,6 +12,7 @@ #include #include +#include #include #include #include @@ -26,6 +27,36 @@ #include "sunxi.h" +#define WATCHDOG_CTRL_REG 0x00 +#define WATCHDOG_MODE_REG 0x04 + +static void __iomem *wdt_base; + +static void sunxi_setup_restart(void) +{ + struct device_node *np = of_find_compatible_node(NULL, NULL, + "allwinner,sunxi-wdt"); + if (WARN(!np, "unable to setup watchdog restart")) + return; + + wdt_base = of_iomap(np, 0); + WARN(!wdt_base, "failed to map watchdog base address"); +} + +static void sunxi_restart(char mode, const char *cmd) +{ + if (!wdt_base) + return; + + /* Enable timer and set reset bit in the watchdog */ + writel(3, wdt_base + WATCHDOG_MODE_REG); + writel(0xa57 << 1 | 1, wdt_base + WATCHDOG_CTRL_REG); + while(1) { + mdelay(5); + writel(3, wdt_base + WATCHDOG_MODE_REG); + } +} + static struct map_desc sunxi_io_desc[] __initdata = { { .virtual = (unsigned long) SUNXI_REGS_VIRT_BASE, @@ -42,6 +73,8 @@ void __init sunxi_map_io(void) static void __init sunxi_dt_init(void) { + sunxi_setup_restart(); + of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); } @@ -56,6 +89,7 @@ DT_MACHINE_START(SUNXI_DT, "Allwinner A1X (Device Tree)") .map_io = sunxi_map_io, .init_irq = sunxi_init_irq, .handle_irq = sunxi_handle_irq, + .restart = sunxi_restart, .timer = &sunxi_timer, .dt_compat = sunxi_board_dt_compat, MACHINE_END -- cgit v0.10.2 From ea7d1bc97d91e9b83436a6188cde987aab79aacf Mon Sep 17 00:00:00 2001 From: Alexander Shiyan Date: Sat, 17 Nov 2012 17:57:11 +0400 Subject: ARM: clps711x: Always select AUTO_ZRELADDR for a platform Signed-off-by: Alexander Shiyan Signed-off-by: Olof Johansson diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index e63e3ee..64a23cb 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -366,6 +366,7 @@ config ARCH_CLPS711X bool "Cirrus Logic CLPS711x/EP721x/EP731x-based" select ARCH_REQUIRE_GPIOLIB select ARCH_USES_GETTIMEOFFSET + select AUTO_ZRELADDR select CLKDEV_LOOKUP select COMMON_CLK select CPU_ARM720T diff --git a/arch/arm/mach-clps711x/Makefile.boot b/arch/arm/mach-clps711x/Makefile.boot index 9398e85..eba77d3 100644 --- a/arch/arm/mach-clps711x/Makefile.boot +++ b/arch/arm/mach-clps711x/Makefile.boot @@ -1,5 +1,4 @@ # The standard locations for stuff on CLPS711x type processors - zreladdr-y += 0xc0028000 params_phys-y := 0xc0000100 # Should probably have some agreement on these... initrd_phys-$(CONFIG_ARCH_P720T) := 0xc0400000 -- cgit v0.10.2 From 86449336dd3c6e0edf97b971db2daa88917c1d7e Mon Sep 17 00:00:00 2001 From: Alexander Shiyan Date: Sat, 17 Nov 2012 17:57:12 +0400 Subject: ARM: clps711x: cdb89712: Special driver for handling memory is removed This patch provide migration to using "physmap-flash" and "mtd-ram" drivers instead of using special driver for handling memory. Signed-off-by: Alexander Shiyan Signed-off-by: Olof Johansson diff --git a/arch/arm/mach-clps711x/cdb89712.c b/arch/arm/mach-clps711x/cdb89712.c index 235e625..24f573b 100644 --- a/arch/arm/mach-clps711x/cdb89712.c +++ b/arch/arm/mach-clps711x/cdb89712.c @@ -26,6 +26,10 @@ #include #include +#include +#include +#include + #include #include #include @@ -44,8 +48,88 @@ static struct resource cdb89712_cs8900_resource[] __initdata = { DEFINE_RES_IRQ(CDB89712_CS8900_IRQ), }; +static struct mtd_partition cdb89712_flash_partitions[] __initdata = { + { + .name = "Flash", + .offset = 0, + .size = MTDPART_SIZ_FULL, + }, +}; + +static struct physmap_flash_data cdb89712_flash_pdata __initdata = { + .width = 4, + .probe_type = "map_rom", + .parts = cdb89712_flash_partitions, + .nr_parts = ARRAY_SIZE(cdb89712_flash_partitions), +}; + +static struct resource cdb89712_flash_resources[] __initdata = { + DEFINE_RES_MEM(CS0_PHYS_BASE, SZ_8M), +}; + +static struct platform_device cdb89712_flash_pdev __initdata = { + .name = "physmap-flash", + .id = 0, + .resource = cdb89712_flash_resources, + .num_resources = ARRAY_SIZE(cdb89712_flash_resources), + .dev = { + .platform_data = &cdb89712_flash_pdata, + }, +}; + +static struct mtd_partition cdb89712_bootrom_partitions[] __initdata = { + { + .name = "BootROM", + .offset = 0, + .size = MTDPART_SIZ_FULL, + }, +}; + +static struct physmap_flash_data cdb89712_bootrom_pdata __initdata = { + .width = 4, + .probe_type = "map_rom", + .parts = cdb89712_bootrom_partitions, + .nr_parts = ARRAY_SIZE(cdb89712_bootrom_partitions), +}; + +static struct resource cdb89712_bootrom_resources[] __initdata = { + DEFINE_RES_NAMED(CS7_PHYS_BASE, SZ_128, "BOOTROM", IORESOURCE_MEM | + IORESOURCE_CACHEABLE | IORESOURCE_READONLY), +}; + +static struct platform_device cdb89712_bootrom_pdev __initdata = { + .name = "physmap-flash", + .id = 1, + .resource = cdb89712_bootrom_resources, + .num_resources = ARRAY_SIZE(cdb89712_bootrom_resources), + .dev = { + .platform_data = &cdb89712_bootrom_pdata, + }, +}; + +static struct platdata_mtd_ram cdb89712_sram_pdata __initdata = { + .bankwidth = 4, +}; + +static struct resource cdb89712_sram_resources[] __initdata = { + DEFINE_RES_MEM(CLPS711X_SRAM_BASE, CLPS711X_SRAM_SIZE), +}; + +static struct platform_device cdb89712_sram_pdev __initdata = { + .name = "mtd-ram", + .id = 0, + .resource = cdb89712_sram_resources, + .num_resources = ARRAY_SIZE(cdb89712_sram_resources), + .dev = { + .platform_data = &cdb89712_sram_pdata, + }, +}; + static void __init cdb89712_init(void) { + platform_device_register(&cdb89712_flash_pdev); + platform_device_register(&cdb89712_bootrom_pdev); + platform_device_register(&cdb89712_sram_pdev); platform_device_register_simple("cs89x0", 0, cdb89712_cs8900_resource, ARRAY_SIZE(cdb89712_cs8900_resource)); } diff --git a/arch/arm/mach-clps711x/include/mach/hardware.h b/arch/arm/mach-clps711x/include/mach/hardware.h index bd919e7..5a278cb 100644 --- a/arch/arm/mach-clps711x/include/mach/hardware.h +++ b/arch/arm/mach-clps711x/include/mach/hardware.h @@ -64,6 +64,9 @@ #define CS7_PHYS_BASE (0x00000000) #endif +#define CLPS711X_SRAM_BASE CS6_PHYS_BASE +#define CLPS711X_SRAM_SIZE (48 * 1024) + #if defined (CONFIG_ARCH_EDB7211) /* The extra 8 lines of the keyboard matrix are wired to chip select 3 */ diff --git a/drivers/mtd/maps/Kconfig b/drivers/mtd/maps/Kconfig index 2e47c2e..df30486 100644 --- a/drivers/mtd/maps/Kconfig +++ b/drivers/mtd/maps/Kconfig @@ -324,13 +324,6 @@ config MTD_SOLUTIONENGINE This enables access to the flash chips on the Hitachi SolutionEngine and similar boards. Say 'Y' if you are building a kernel for such a board. -config MTD_CDB89712 - tristate "Cirrus CDB89712 evaluation board mappings" - depends on MTD_CFI && ARCH_CDB89712 - help - This enables access to the flash or ROM chips on the CDB89712 board. - If you have such a board, say 'Y'. - config MTD_SA1100 tristate "CFI Flash device mapped on StrongARM SA11x0" depends on MTD_CFI && ARCH_SA1100 diff --git a/drivers/mtd/maps/Makefile b/drivers/mtd/maps/Makefile index deb43e9..a0240ed 100644 --- a/drivers/mtd/maps/Makefile +++ b/drivers/mtd/maps/Makefile @@ -7,7 +7,6 @@ obj-$(CONFIG_MTD) += map_funcs.o endif # Chip mappings -obj-$(CONFIG_MTD_CDB89712) += cdb89712.o obj-$(CONFIG_MTD_CFI_FLAGADM) += cfi_flagadm.o obj-$(CONFIG_MTD_DC21285) += dc21285.o obj-$(CONFIG_MTD_DILNETPC) += dilnetpc.o diff --git a/drivers/mtd/maps/cdb89712.c b/drivers/mtd/maps/cdb89712.c deleted file mode 100644 index c29cbf8..0000000 --- a/drivers/mtd/maps/cdb89712.c +++ /dev/null @@ -1,278 +0,0 @@ -/* - * Flash on Cirrus CDB89712 - * - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -/* dynamic ioremap() areas */ -#define FLASH_START 0x00000000 -#define FLASH_SIZE 0x800000 -#define FLASH_WIDTH 4 - -#define SRAM_START 0x60000000 -#define SRAM_SIZE 0xc000 -#define SRAM_WIDTH 4 - -#define BOOTROM_START 0x70000000 -#define BOOTROM_SIZE 0x80 -#define BOOTROM_WIDTH 4 - - -static struct mtd_info *flash_mtd; - -struct map_info cdb89712_flash_map = { - .name = "flash", - .size = FLASH_SIZE, - .bankwidth = FLASH_WIDTH, - .phys = FLASH_START, -}; - -struct resource cdb89712_flash_resource = { - .name = "Flash", - .start = FLASH_START, - .end = FLASH_START + FLASH_SIZE - 1, - .flags = IORESOURCE_IO | IORESOURCE_BUSY, -}; - -static int __init init_cdb89712_flash (void) -{ - int err; - - if (request_resource (&ioport_resource, &cdb89712_flash_resource)) { - printk(KERN_NOTICE "Failed to reserve Cdb89712 FLASH space\n"); - err = -EBUSY; - goto out; - } - - cdb89712_flash_map.virt = ioremap(FLASH_START, FLASH_SIZE); - if (!cdb89712_flash_map.virt) { - printk(KERN_NOTICE "Failed to ioremap Cdb89712 FLASH space\n"); - err = -EIO; - goto out_resource; - } - simple_map_init(&cdb89712_flash_map); - flash_mtd = do_map_probe("cfi_probe", &cdb89712_flash_map); - if (!flash_mtd) { - flash_mtd = do_map_probe("map_rom", &cdb89712_flash_map); - if (flash_mtd) - flash_mtd->erasesize = 0x10000; - } - if (!flash_mtd) { - printk("FLASH probe failed\n"); - err = -ENXIO; - goto out_ioremap; - } - - flash_mtd->owner = THIS_MODULE; - - if (mtd_device_register(flash_mtd, NULL, 0)) { - printk("FLASH device addition failed\n"); - err = -ENOMEM; - goto out_probe; - } - - return 0; - -out_probe: - map_destroy(flash_mtd); - flash_mtd = 0; -out_ioremap: - iounmap((void *)cdb89712_flash_map.virt); -out_resource: - release_resource (&cdb89712_flash_resource); -out: - return err; -} - - - - - -static struct mtd_info *sram_mtd; - -struct map_info cdb89712_sram_map = { - .name = "SRAM", - .size = SRAM_SIZE, - .bankwidth = SRAM_WIDTH, - .phys = SRAM_START, -}; - -struct resource cdb89712_sram_resource = { - .name = "SRAM", - .start = SRAM_START, - .end = SRAM_START + SRAM_SIZE - 1, - .flags = IORESOURCE_IO | IORESOURCE_BUSY, -}; - -static int __init init_cdb89712_sram (void) -{ - int err; - - if (request_resource (&ioport_resource, &cdb89712_sram_resource)) { - printk(KERN_NOTICE "Failed to reserve Cdb89712 SRAM space\n"); - err = -EBUSY; - goto out; - } - - cdb89712_sram_map.virt = ioremap(SRAM_START, SRAM_SIZE); - if (!cdb89712_sram_map.virt) { - printk(KERN_NOTICE "Failed to ioremap Cdb89712 SRAM space\n"); - err = -EIO; - goto out_resource; - } - simple_map_init(&cdb89712_sram_map); - sram_mtd = do_map_probe("map_ram", &cdb89712_sram_map); - if (!sram_mtd) { - printk("SRAM probe failed\n"); - err = -ENXIO; - goto out_ioremap; - } - - sram_mtd->owner = THIS_MODULE; - sram_mtd->erasesize = 16; - - if (mtd_device_register(sram_mtd, NULL, 0)) { - printk("SRAM device addition failed\n"); - err = -ENOMEM; - goto out_probe; - } - - return 0; - -out_probe: - map_destroy(sram_mtd); - sram_mtd = 0; -out_ioremap: - iounmap((void *)cdb89712_sram_map.virt); -out_resource: - release_resource (&cdb89712_sram_resource); -out: - return err; -} - - - - - - - -static struct mtd_info *bootrom_mtd; - -struct map_info cdb89712_bootrom_map = { - .name = "BootROM", - .size = BOOTROM_SIZE, - .bankwidth = BOOTROM_WIDTH, - .phys = BOOTROM_START, -}; - -struct resource cdb89712_bootrom_resource = { - .name = "BootROM", - .start = BOOTROM_START, - .end = BOOTROM_START + BOOTROM_SIZE - 1, - .flags = IORESOURCE_IO | IORESOURCE_BUSY, -}; - -static int __init init_cdb89712_bootrom (void) -{ - int err; - - if (request_resource (&ioport_resource, &cdb89712_bootrom_resource)) { - printk(KERN_NOTICE "Failed to reserve Cdb89712 BOOTROM space\n"); - err = -EBUSY; - goto out; - } - - cdb89712_bootrom_map.virt = ioremap(BOOTROM_START, BOOTROM_SIZE); - if (!cdb89712_bootrom_map.virt) { - printk(KERN_NOTICE "Failed to ioremap Cdb89712 BootROM space\n"); - err = -EIO; - goto out_resource; - } - simple_map_init(&cdb89712_bootrom_map); - bootrom_mtd = do_map_probe("map_rom", &cdb89712_bootrom_map); - if (!bootrom_mtd) { - printk("BootROM probe failed\n"); - err = -ENXIO; - goto out_ioremap; - } - - bootrom_mtd->owner = THIS_MODULE; - bootrom_mtd->erasesize = 0x10000; - - if (mtd_device_register(bootrom_mtd, NULL, 0)) { - printk("BootROM device addition failed\n"); - err = -ENOMEM; - goto out_probe; - } - - return 0; - -out_probe: - map_destroy(bootrom_mtd); - bootrom_mtd = 0; -out_ioremap: - iounmap((void *)cdb89712_bootrom_map.virt); -out_resource: - release_resource (&cdb89712_bootrom_resource); -out: - return err; -} - - - - - -static int __init init_cdb89712_maps(void) -{ - - printk(KERN_INFO "Cirrus CDB89712 MTD mappings:\n Flash 0x%x at 0x%x\n SRAM 0x%x at 0x%x\n BootROM 0x%x at 0x%x\n", - FLASH_SIZE, FLASH_START, SRAM_SIZE, SRAM_START, BOOTROM_SIZE, BOOTROM_START); - - init_cdb89712_flash(); - init_cdb89712_sram(); - init_cdb89712_bootrom(); - - return 0; -} - - -static void __exit cleanup_cdb89712_maps(void) -{ - if (sram_mtd) { - mtd_device_unregister(sram_mtd); - map_destroy(sram_mtd); - iounmap((void *)cdb89712_sram_map.virt); - release_resource (&cdb89712_sram_resource); - } - - if (flash_mtd) { - mtd_device_unregister(flash_mtd); - map_destroy(flash_mtd); - iounmap((void *)cdb89712_flash_map.virt); - release_resource (&cdb89712_flash_resource); - } - - if (bootrom_mtd) { - mtd_device_unregister(bootrom_mtd); - map_destroy(bootrom_mtd); - iounmap((void *)cdb89712_bootrom_map.virt); - release_resource (&cdb89712_bootrom_resource); - } -} - -module_init(init_cdb89712_maps); -module_exit(cleanup_cdb89712_maps); - -MODULE_AUTHOR("Ray L"); -MODULE_DESCRIPTION("ARM CDB89712 map driver"); -MODULE_LICENSE("GPL"); -- cgit v0.10.2 From 0d8be81c0e15ad8ebdd35bbbeb35b03f85a4b558 Mon Sep 17 00:00:00 2001 From: Alexander Shiyan Date: Sat, 17 Nov 2012 17:57:13 +0400 Subject: ARM: clps711x: Implement usage "SPARSE_IRQ" kernel option for a platform Signed-off-by: Alexander Shiyan Signed-off-by: Olof Johansson diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 64a23cb..0203b1b 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -372,6 +372,7 @@ config ARCH_CLPS711X select CPU_ARM720T select GENERIC_CLOCKEVENTS select NEED_MACH_MEMORY_H + select SPARSE_IRQ help Support for Cirrus Logic 711x/721x/731x based boards. diff --git a/arch/arm/mach-clps711x/autcpu12.c b/arch/arm/mach-clps711x/autcpu12.c index c20043b..b90a316 100644 --- a/arch/arm/mach-clps711x/autcpu12.c +++ b/arch/arm/mach-clps711x/autcpu12.c @@ -70,6 +70,7 @@ static void __init autcpu12_init(void) MACHINE_START(AUTCPU12, "autronix autcpu12") /* Maintainer: Thomas Gleixner */ .atag_offset = 0x20000, + .nr_irqs = CLPS711X_NR_IRQS, .map_io = clps711x_map_io, .init_irq = clps711x_init_irq, .timer = &clps711x_timer, diff --git a/arch/arm/mach-clps711x/cdb89712.c b/arch/arm/mach-clps711x/cdb89712.c index 24f573b..133794c 100644 --- a/arch/arm/mach-clps711x/cdb89712.c +++ b/arch/arm/mach-clps711x/cdb89712.c @@ -137,6 +137,7 @@ static void __init cdb89712_init(void) MACHINE_START(CDB89712, "Cirrus-CDB89712") /* Maintainer: Ray Lehtiniemi */ .atag_offset = 0x100, + .nr_irqs = CLPS711X_NR_IRQS, .map_io = clps711x_map_io, .init_irq = clps711x_init_irq, .timer = &clps711x_timer, diff --git a/arch/arm/mach-clps711x/clep7312.c b/arch/arm/mach-clps711x/clep7312.c index dbc7842..be776c5 100644 --- a/arch/arm/mach-clps711x/clep7312.c +++ b/arch/arm/mach-clps711x/clep7312.c @@ -37,6 +37,7 @@ fixup_clep7312(struct tag *tags, char **cmdline, struct meminfo *mi) MACHINE_START(CLEP7212, "Cirrus Logic 7212/7312") /* Maintainer: Nobody */ .atag_offset = 0x0100, + .nr_irqs = CLPS711X_NR_IRQS, .fixup = fixup_clep7312, .map_io = clps711x_map_io, .init_irq = clps711x_init_irq, diff --git a/arch/arm/mach-clps711x/common.h b/arch/arm/mach-clps711x/common.h index dc60cae..28b1701 100644 --- a/arch/arm/mach-clps711x/common.h +++ b/arch/arm/mach-clps711x/common.h @@ -4,6 +4,7 @@ * Common bits. */ +#define CLPS711X_NR_IRQS (30) #define CLPS711X_NR_GPIO (4 * 8 + 3) #define CLPS711X_GPIO(prt, bit) ((prt) * 8 + (bit)) diff --git a/arch/arm/mach-clps711x/edb7211.c b/arch/arm/mach-clps711x/edb7211.c index 59dec3b..7b161dd 100644 --- a/arch/arm/mach-clps711x/edb7211.c +++ b/arch/arm/mach-clps711x/edb7211.c @@ -91,6 +91,7 @@ static void __init edb7211_init(void) MACHINE_START(EDB7211, "CL-EDB7211 (EP7211 eval board)") /* Maintainer: Jon McClintock */ .atag_offset = VIDEORAM_SIZE + 0x100, + .nr_irqs = CLPS711X_NR_IRQS, .fixup = fixup_edb7211, .reserve = edb7211_reserve, .map_io = edb7211_map_io, diff --git a/arch/arm/mach-clps711x/fortunet.c b/arch/arm/mach-clps711x/fortunet.c index 3a3f0b7..a5c0816 100644 --- a/arch/arm/mach-clps711x/fortunet.c +++ b/arch/arm/mach-clps711x/fortunet.c @@ -74,6 +74,7 @@ fortunet_fixup(struct tag *tags, char **cmdline, struct meminfo *mi) MACHINE_START(FORTUNET, "ARM-FortuNet") /* Maintainer: FortuNet Inc. */ + .nr_irqs = CLPS711X_NR_IRQS, .fixup = fortunet_fixup, .map_io = clps711x_map_io, .init_irq = clps711x_init_irq, diff --git a/arch/arm/mach-clps711x/include/mach/clps711x.h b/arch/arm/mach-clps711x/include/mach/clps711x.h index aee352c..1f4728d 100644 --- a/arch/arm/mach-clps711x/include/mach/clps711x.h +++ b/arch/arm/mach-clps711x/include/mach/clps711x.h @@ -277,4 +277,25 @@ #define MEMCFG_WAITSTATE_2_0 (14 << 2) #define MEMCFG_WAITSTATE_1_0 (15 << 2) +/* INTSR1 Interrupts */ +#define IRQ_CSINT (4) +#define IRQ_EINT1 (5) +#define IRQ_EINT2 (6) +#define IRQ_EINT3 (7) +#define IRQ_TC1OI (8) +#define IRQ_TC2OI (9) +#define IRQ_RTCMI (10) +#define IRQ_TINT (11) +#define IRQ_UTXINT1 (12) +#define IRQ_URXINT1 (13) +#define IRQ_UMSINT (14) +#define IRQ_SSEOTI (15) + +/* INTSR2 Interrupts */ +#define IRQ_KBDINT (16 + 0) +#define IRQ_SS2RX (16 + 1) +#define IRQ_SS2TX (16 + 2) +#define IRQ_UTXINT2 (16 + 12) +#define IRQ_URXINT2 (16 + 13) + #endif /* __MACH_CLPS711X_H */ diff --git a/arch/arm/mach-clps711x/include/mach/irqs.h b/arch/arm/mach-clps711x/include/mach/irqs.h deleted file mode 100644 index 1ea56db..0000000 --- a/arch/arm/mach-clps711x/include/mach/irqs.h +++ /dev/null @@ -1,46 +0,0 @@ -/* - * arch/arm/mach-clps711x/include/mach/irqs.h - * - * Copyright (C) 2000 Deep Blue Solutions Ltd. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -/* - * Interrupts from INTSR1 - */ -#define IRQ_CSINT 4 -#define IRQ_EINT1 5 -#define IRQ_EINT2 6 -#define IRQ_EINT3 7 -#define IRQ_TC1OI 8 -#define IRQ_TC2OI 9 -#define IRQ_RTCMI 10 -#define IRQ_TINT 11 -#define IRQ_UTXINT1 12 -#define IRQ_URXINT1 13 -#define IRQ_UMSINT 14 -#define IRQ_SSEOTI 15 - -/* - * Interrupts from INTSR2 - */ -#define IRQ_KBDINT (16+0) /* bit 0 */ -#define IRQ_SS2RX (16+1) /* bit 1 */ -#define IRQ_SS2TX (16+2) /* bit 2 */ -#define IRQ_UTXINT2 (16+12) /* bit 12 */ -#define IRQ_URXINT2 (16+13) /* bit 13 */ - -#define NR_IRQS 30 diff --git a/arch/arm/mach-clps711x/p720t.c b/arch/arm/mach-clps711x/p720t.c index d95cb8a..fbe7552 100644 --- a/arch/arm/mach-clps711x/p720t.c +++ b/arch/arm/mach-clps711x/p720t.c @@ -134,6 +134,7 @@ static void __init p720t_init_late(void) MACHINE_START(P720T, "ARM-Prospector720T") /* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */ .atag_offset = 0x100, + .nr_irqs = CLPS711X_NR_IRQS, .fixup = fixup_p720t, .map_io = p720t_map_io, .init_early = p720t_init_early, -- cgit v0.10.2 From 99f04c8f69753e4032059eeb0c21197948e459f7 Mon Sep 17 00:00:00 2001 From: Alexander Shiyan Date: Sat, 17 Nov 2012 17:57:14 +0400 Subject: ARM: clps711x: Implement usage "MULTI_IRQ_HANDLER" kernel option for a platform Signed-off-by: Alexander Shiyan Signed-off-by: Olof Johansson diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 0203b1b..9c2c8f3 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -371,6 +371,7 @@ config ARCH_CLPS711X select COMMON_CLK select CPU_ARM720T select GENERIC_CLOCKEVENTS + select MULTI_IRQ_HANDLER select NEED_MACH_MEMORY_H select SPARSE_IRQ help diff --git a/arch/arm/mach-clps711x/autcpu12.c b/arch/arm/mach-clps711x/autcpu12.c index b90a316..3de1955 100644 --- a/arch/arm/mach-clps711x/autcpu12.c +++ b/arch/arm/mach-clps711x/autcpu12.c @@ -75,6 +75,7 @@ MACHINE_START(AUTCPU12, "autronix autcpu12") .init_irq = clps711x_init_irq, .timer = &clps711x_timer, .init_machine = autcpu12_init, + .handle_irq = clps711x_handle_irq, .restart = clps711x_restart, MACHINE_END diff --git a/arch/arm/mach-clps711x/cdb89712.c b/arch/arm/mach-clps711x/cdb89712.c index 133794c..60900dd 100644 --- a/arch/arm/mach-clps711x/cdb89712.c +++ b/arch/arm/mach-clps711x/cdb89712.c @@ -142,5 +142,6 @@ MACHINE_START(CDB89712, "Cirrus-CDB89712") .init_irq = clps711x_init_irq, .timer = &clps711x_timer, .init_machine = cdb89712_init, + .handle_irq = clps711x_handle_irq, .restart = clps711x_restart, MACHINE_END diff --git a/arch/arm/mach-clps711x/clep7312.c b/arch/arm/mach-clps711x/clep7312.c index be776c5..0b32a48 100644 --- a/arch/arm/mach-clps711x/clep7312.c +++ b/arch/arm/mach-clps711x/clep7312.c @@ -33,7 +33,6 @@ fixup_clep7312(struct tag *tags, char **cmdline, struct meminfo *mi) mi->bank[0].size = 0x01000000; } - MACHINE_START(CLEP7212, "Cirrus Logic 7212/7312") /* Maintainer: Nobody */ .atag_offset = 0x0100, @@ -42,6 +41,6 @@ MACHINE_START(CLEP7212, "Cirrus Logic 7212/7312") .map_io = clps711x_map_io, .init_irq = clps711x_init_irq, .timer = &clps711x_timer, + .handle_irq = clps711x_handle_irq, .restart = clps711x_restart, MACHINE_END - diff --git a/arch/arm/mach-clps711x/common.c b/arch/arm/mach-clps711x/common.c index 286d6e6..0842024 100644 --- a/arch/arm/mach-clps711x/common.c +++ b/arch/arm/mach-clps711x/common.c @@ -29,6 +29,7 @@ #include #include +#include #include #include #include @@ -134,13 +135,11 @@ static struct irq_chip int2_chip = { .irq_unmask = int2_unmask, }; -struct clps711x_irqdesc { +static struct { int nr; struct irq_chip *chip; irq_flow_handler_t handle; -}; - -static struct clps711x_irqdesc clps711x_irqdescs[] __initdata = { +} clps711x_irqdescs[] __initdata = { { IRQ_CSINT, &int1_chip, handle_fasteoi_irq, }, { IRQ_EINT1, &int1_chip, handle_level_irq, }, { IRQ_EINT2, &int1_chip, handle_level_irq, }, @@ -191,6 +190,44 @@ void __init clps711x_init_irq(void) } } +inline u32 fls16(u32 x) +{ + u32 r = 15; + + if (!(x & 0xff00)) { + x <<= 8; + r -= 8; + } + if (!(x & 0xf000)) { + x <<= 4; + r -= 4; + } + if (!(x & 0xc000)) { + x <<= 2; + r -= 2; + } + if (!(x & 0x8000)) + r--; + + return r; +} + +asmlinkage void __exception_irq_entry clps711x_handle_irq(struct pt_regs *regs) +{ + u32 irqstat; + void __iomem *base = CLPS711X_VIRT_BASE; + + irqstat = readl_relaxed(base + INTSR1) & readl_relaxed(base + INTMR1); + if (irqstat) { + handle_IRQ(fls16(irqstat), regs); + return; + } + + irqstat = readl_relaxed(base + INTSR2) & readl_relaxed(base + INTMR2); + if (likely(irqstat)) + handle_IRQ(fls16(irqstat) + 16, regs); +} + static void clps711x_clockevent_set_mode(enum clock_event_mode mode, struct clock_event_device *evt) { diff --git a/arch/arm/mach-clps711x/common.h b/arch/arm/mach-clps711x/common.h index 28b1701..3c7f12c 100644 --- a/arch/arm/mach-clps711x/common.h +++ b/arch/arm/mach-clps711x/common.h @@ -12,5 +12,6 @@ struct sys_timer; extern void clps711x_map_io(void); extern void clps711x_init_irq(void); -extern struct sys_timer clps711x_timer; +extern void clps711x_handle_irq(struct pt_regs *regs); extern void clps711x_restart(char mode, const char *cmd); +extern struct sys_timer clps711x_timer; diff --git a/arch/arm/mach-clps711x/edb7211.c b/arch/arm/mach-clps711x/edb7211.c index 7b161dd..cc32a65 100644 --- a/arch/arm/mach-clps711x/edb7211.c +++ b/arch/arm/mach-clps711x/edb7211.c @@ -98,5 +98,6 @@ MACHINE_START(EDB7211, "CL-EDB7211 (EP7211 eval board)") .init_irq = clps711x_init_irq, .timer = &clps711x_timer, .init_machine = edb7211_init, + .handle_irq = clps711x_handle_irq, .restart = clps711x_restart, MACHINE_END diff --git a/arch/arm/mach-clps711x/fortunet.c b/arch/arm/mach-clps711x/fortunet.c index a5c0816..7d01255 100644 --- a/arch/arm/mach-clps711x/fortunet.c +++ b/arch/arm/mach-clps711x/fortunet.c @@ -79,5 +79,6 @@ MACHINE_START(FORTUNET, "ARM-FortuNet") .map_io = clps711x_map_io, .init_irq = clps711x_init_irq, .timer = &clps711x_timer, + .handle_irq = clps711x_handle_irq, .restart = clps711x_restart, MACHINE_END diff --git a/arch/arm/mach-clps711x/include/mach/entry-macro.S b/arch/arm/mach-clps711x/include/mach/entry-macro.S deleted file mode 100644 index 56e5c2c..0000000 --- a/arch/arm/mach-clps711x/include/mach/entry-macro.S +++ /dev/null @@ -1,51 +0,0 @@ -/* - * arch/arm/mach-clps711x/include/mach/entry-macro.S - * - * Low-level IRQ helper macros for CLPS711X-based platforms - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ -#include - - .macro get_irqnr_preamble, base, tmp - .endm - -#if (INTSR2 - INTSR1) != (INTMR2 - INTMR1) -#error INTSR stride != INTMR stride -#endif - - .macro get_irqnr_and_base, irqnr, stat, base, mask - mov \base, #CLPS711X_VIRT_BASE - ldr \stat, [\base, #INTSR1] - ldr \mask, [\base, #INTMR1] - mov \irqnr, #4 - mov \mask, \mask, lsl #16 - and \stat, \stat, \mask, lsr #16 - movs \stat, \stat, lsr #4 - bne 1001f - - add \base, \base, #INTSR2 - INTSR1 - ldr \stat, [\base, #INTSR1] - ldr \mask, [\base, #INTMR1] - mov \irqnr, #16 - mov \mask, \mask, lsl #16 - and \stat, \stat, \mask, lsr #16 - -1001: tst \stat, #255 - addeq \irqnr, \irqnr, #8 - moveq \stat, \stat, lsr #8 - tst \stat, #15 - addeq \irqnr, \irqnr, #4 - moveq \stat, \stat, lsr #4 - tst \stat, #3 - addeq \irqnr, \irqnr, #2 - moveq \stat, \stat, lsr #2 - tst \stat, #1 - addeq \irqnr, \irqnr, #1 - moveq \stat, \stat, lsr #1 - tst \stat, #1 @ bit 0 should be set - .endm - - diff --git a/arch/arm/mach-clps711x/p720t.c b/arch/arm/mach-clps711x/p720t.c index fbe7552..a58a058 100644 --- a/arch/arm/mach-clps711x/p720t.c +++ b/arch/arm/mach-clps711x/p720t.c @@ -142,5 +142,6 @@ MACHINE_START(P720T, "ARM-Prospector720T") .timer = &clps711x_timer, .init_machine = p720t_init, .init_late = p720t_init_late, + .handle_irq = clps711x_handle_irq, .restart = clps711x_restart, MACHINE_END -- cgit v0.10.2 From 197926108cc837474f8807678d6220bdce281620 Mon Sep 17 00:00:00 2001 From: Alexander Shiyan Date: Sat, 17 Nov 2012 17:57:15 +0400 Subject: ARM: clps711x: Add FIQ interrupt handling CLPS711X-target CPU can have a several FIQ interrupts. With this patch we adds handling for a one which will be used for ALSA PCM later. Since FIQ have a separate handler we only add "mask" and "unmask" calls which will used for enable/disable_irq functions. Signed-off-by: Alexander Shiyan Signed-off-by: Olof Johansson diff --git a/arch/arm/mach-clps711x/common.c b/arch/arm/mach-clps711x/common.c index 0842024..fcdcd91 100644 --- a/arch/arm/mach-clps711x/common.c +++ b/arch/arm/mach-clps711x/common.c @@ -30,6 +30,7 @@ #include #include +#include #include #include #include @@ -91,7 +92,7 @@ static void int1_unmask(struct irq_data *d) } static struct irq_chip int1_chip = { - .name = "Interrupt Vector 1 ", + .name = "Interrupt Vector 1", .irq_ack = int1_ack, .irq_eoi = int1_eoi, .irq_mask = int1_mask, @@ -128,13 +129,37 @@ static void int2_unmask(struct irq_data *d) } static struct irq_chip int2_chip = { - .name = "Interrupt Vector 2 ", + .name = "Interrupt Vector 2", .irq_ack = int2_ack, .irq_eoi = int2_eoi, .irq_mask = int2_mask, .irq_unmask = int2_unmask, }; +static void int3_mask(struct irq_data *d) +{ + u32 intmr3; + + intmr3 = clps_readl(INTMR3); + intmr3 &= ~(1 << (d->irq - 32)); + clps_writel(intmr3, INTMR3); +} + +static void int3_unmask(struct irq_data *d) +{ + u32 intmr3; + + intmr3 = clps_readl(INTMR3); + intmr3 |= 1 << (d->irq - 32); + clps_writel(intmr3, INTMR3); +} + +static struct irq_chip int3_chip = { + .name = "Interrupt Vector 3", + .irq_mask = int3_mask, + .irq_unmask = int3_unmask, +}; + static struct { int nr; struct irq_chip *chip; @@ -188,6 +213,14 @@ void __init clps711x_init_irq(void) set_irq_flags(clps711x_irqdescs[i].nr, IRQF_VALID | IRQF_PROBE); } + + if (IS_ENABLED(CONFIG_FIQ)) { + init_FIQ(0); + irq_set_chip_and_handler(IRQ_DAIINT, &int3_chip, + handle_bad_irq); + set_irq_flags(IRQ_DAIINT, + IRQF_VALID | IRQF_PROBE | IRQF_NOAUTOEN); + } } inline u32 fls16(u32 x) diff --git a/arch/arm/mach-clps711x/common.h b/arch/arm/mach-clps711x/common.h index 3c7f12c..b7c0c75 100644 --- a/arch/arm/mach-clps711x/common.h +++ b/arch/arm/mach-clps711x/common.h @@ -4,7 +4,7 @@ * Common bits. */ -#define CLPS711X_NR_IRQS (30) +#define CLPS711X_NR_IRQS (33) #define CLPS711X_NR_GPIO (4 * 8 + 3) #define CLPS711X_GPIO(prt, bit) ((prt) * 8 + (bit)) diff --git a/arch/arm/mach-clps711x/include/mach/clps711x.h b/arch/arm/mach-clps711x/include/mach/clps711x.h index 1f4728d..01d1b95 100644 --- a/arch/arm/mach-clps711x/include/mach/clps711x.h +++ b/arch/arm/mach-clps711x/include/mach/clps711x.h @@ -298,4 +298,7 @@ #define IRQ_UTXINT2 (16 + 12) #define IRQ_URXINT2 (16 + 13) +/* INTSR3 Interrupts */ +#define IRQ_DAIINT (32 + 0) + #endif /* __MACH_CLPS711X_H */ -- cgit v0.10.2 From 49e67de364ea7b2dd69066c95990e686d4de6154 Mon Sep 17 00:00:00 2001 From: Alexander Shiyan Date: Sat, 17 Nov 2012 17:57:16 +0400 Subject: ARM: clps711x: Unused empty "ACK" calls for IRQ-chips removed Signed-off-by: Alexander Shiyan Signed-off-by: Olof Johansson diff --git a/arch/arm/mach-clps711x/common.c b/arch/arm/mach-clps711x/common.c index fcdcd91..e046439 100644 --- a/arch/arm/mach-clps711x/common.c +++ b/arch/arm/mach-clps711x/common.c @@ -66,10 +66,6 @@ static void int1_mask(struct irq_data *d) clps_writel(intmr1, INTMR1); } -static void int1_ack(struct irq_data *d) -{ -} - static void int1_eoi(struct irq_data *d) { switch (d->irq) { @@ -93,7 +89,6 @@ static void int1_unmask(struct irq_data *d) static struct irq_chip int1_chip = { .name = "Interrupt Vector 1", - .irq_ack = int1_ack, .irq_eoi = int1_eoi, .irq_mask = int1_mask, .irq_unmask = int1_unmask, @@ -108,10 +103,6 @@ static void int2_mask(struct irq_data *d) clps_writel(intmr2, INTMR2); } -static void int2_ack(struct irq_data *d) -{ -} - static void int2_eoi(struct irq_data *d) { switch (d->irq) { @@ -130,7 +121,6 @@ static void int2_unmask(struct irq_data *d) static struct irq_chip int2_chip = { .name = "Interrupt Vector 2", - .irq_ack = int2_ack, .irq_eoi = int2_eoi, .irq_mask = int2_mask, .irq_unmask = int2_unmask, -- cgit v0.10.2 From 90383e0ac2ae3df283f2b56997040f71f6d1df08 Mon Sep 17 00:00:00 2001 From: Alexander Shiyan Date: Sat, 17 Nov 2012 17:57:17 +0400 Subject: ARM: clps711x: autcpu12: Special driver for handling NAND memory is removed This patch provide migration to using "gpio-nand" and "basic-mmio-gpio" drivers instead of using special driver for handling NAND memory. Signed-off-by: Alexander Shiyan Signed-off-by: Olof Johansson diff --git a/arch/arm/mach-clps711x/autcpu12.c b/arch/arm/mach-clps711x/autcpu12.c index 3de1955..3fbf43f 100644 --- a/arch/arm/mach-clps711x/autcpu12.c +++ b/arch/arm/mach-clps711x/autcpu12.c @@ -23,9 +23,13 @@ #include #include #include +#include #include #include +#include +#include #include +#include #include #include @@ -43,6 +47,15 @@ #define AUTCPU12_CS8900_BASE (CS2_PHYS_BASE + 0x300) #define AUTCPU12_CS8900_IRQ (IRQ_EINT3) +#define AUTCPU12_SMC_BASE (CS1_PHYS_BASE + 0x06000000) +#define AUTCPU12_SMC_SEL_BASE (AUTCPU12_SMC_BASE + 0x10) + +#define AUTCPU12_MMGPIO_BASE (CLPS711X_NR_GPIO) +#define AUTCPU12_SMC_NCE (AUTCPU12_MMGPIO_BASE + 0) /* Bit 0 */ +#define AUTCPU12_SMC_RDY CLPS711X_GPIO(1, 2) +#define AUTCPU12_SMC_ALE CLPS711X_GPIO(1, 3) +#define AUTCPU12_SMC_CLE CLPS711X_GPIO(1, 3) + static struct resource autcpu12_cs8900_resource[] __initdata = { DEFINE_RES_MEM(AUTCPU12_CS8900_BASE, SZ_1K), DEFINE_RES_IRQ(AUTCPU12_CS8900_IRQ), @@ -59,14 +72,98 @@ static struct platform_device autcpu12_nvram_pdev __initdata = { .num_resources = ARRAY_SIZE(autcpu12_nvram_resource), }; +static struct resource autcpu12_nand_resource[] __initdata = { + DEFINE_RES_MEM(AUTCPU12_SMC_BASE, SZ_16), +}; + +static struct mtd_partition autcpu12_nand_parts[] __initdata = { + { + .name = "Flash partition 1", + .offset = 0, + .size = SZ_8M, + }, + { + .name = "Flash partition 2", + .offset = MTDPART_OFS_APPEND, + .size = MTDPART_SIZ_FULL, + }, +}; + +static void __init autcpu12_adjust_parts(struct gpio_nand_platdata *pdata, + size_t sz) +{ + switch (sz) { + case SZ_16M: + case SZ_32M: + break; + case SZ_64M: + case SZ_128M: + pdata->parts[0].size = SZ_16M; + break; + default: + pr_warn("Unsupported SmartMedia device size %u\n", sz); + break; + } +} + +static struct gpio_nand_platdata autcpu12_nand_pdata __initdata = { + .gpio_rdy = AUTCPU12_SMC_RDY, + .gpio_nce = AUTCPU12_SMC_NCE, + .gpio_ale = AUTCPU12_SMC_ALE, + .gpio_cle = AUTCPU12_SMC_CLE, + .gpio_nwp = -1, + .chip_delay = 20, + .parts = autcpu12_nand_parts, + .num_parts = ARRAY_SIZE(autcpu12_nand_parts), + .adjust_parts = autcpu12_adjust_parts, +}; + +static struct platform_device autcpu12_nand_pdev __initdata = { + .name = "gpio-nand", + .id = -1, + .resource = autcpu12_nand_resource, + .num_resources = ARRAY_SIZE(autcpu12_nand_resource), + .dev = { + .platform_data = &autcpu12_nand_pdata, + }, +}; + +static struct resource autcpu12_mmgpio_resource[] __initdata = { + DEFINE_RES_MEM_NAMED(AUTCPU12_SMC_SEL_BASE, SZ_1, "dat"), +}; + +static struct bgpio_pdata autcpu12_mmgpio_pdata __initdata = { + .base = AUTCPU12_MMGPIO_BASE, + .ngpio = 8, +}; + +static struct platform_device autcpu12_mmgpio_pdev __initdata = { + .name = "basic-mmio-gpio", + .id = -1, + .resource = autcpu12_mmgpio_resource, + .num_resources = ARRAY_SIZE(autcpu12_mmgpio_resource), + .dev = { + .platform_data = &autcpu12_mmgpio_pdata, + }, +}; + static void __init autcpu12_init(void) { platform_device_register_simple("video-clps711x", 0, NULL, 0); platform_device_register_simple("cs89x0", 0, autcpu12_cs8900_resource, ARRAY_SIZE(autcpu12_cs8900_resource)); + platform_device_register(&autcpu12_mmgpio_pdev); platform_device_register(&autcpu12_nvram_pdev); } +static void __init autcpu12_init_late(void) +{ + if (IS_ENABLED(MTD_NAND_GPIO) && IS_ENABLED(GPIO_GENERIC_PLATFORM)) { + /* We are need both drivers to handle NAND */ + platform_device_register(&autcpu12_nand_pdev); + } +} + MACHINE_START(AUTCPU12, "autronix autcpu12") /* Maintainer: Thomas Gleixner */ .atag_offset = 0x20000, @@ -75,6 +172,7 @@ MACHINE_START(AUTCPU12, "autronix autcpu12") .init_irq = clps711x_init_irq, .timer = &clps711x_timer, .init_machine = autcpu12_init, + .init_late = autcpu12_init_late, .handle_irq = clps711x_handle_irq, .restart = clps711x_restart, MACHINE_END diff --git a/arch/arm/mach-clps711x/include/mach/autcpu12.h b/arch/arm/mach-clps711x/include/mach/autcpu12.h index b077abd..0452f5f 100644 --- a/arch/arm/mach-clps711x/include/mach/autcpu12.h +++ b/arch/arm/mach-clps711x/include/mach/autcpu12.h @@ -40,8 +40,6 @@ #define AUTCPU12_PHYS_CSAUX1 CS1_PHYS_BASE +0x04000000 /* physical */ -#define AUTCPU12_PHYS_SMC CS1_PHYS_BASE +0x06000000 /* physical */ - #define AUTCPU12_PHYS_CAN CS1_PHYS_BASE +0x08000000 /* physical */ #define AUTCPU12_PHYS_TOUCH CS1_PHYS_BASE +0x0A000000 /* physical */ @@ -50,14 +48,6 @@ #define AUTCPU12_PHYS_LPT CS1_PHYS_BASE +0x0E000000 /* physical */ -/* -* defines for smartmedia card access -*/ -#define AUTCPU12_SMC_RDY (1<<2) -#define AUTCPU12_SMC_ALE (1<<3) -#define AUTCPU12_SMC_CLE (1<<4) -#define AUTCPU12_SMC_PORT_OFFSET PBDR -#define AUTCPU12_SMC_SELECT_OFFSET 0x10 /* * defines for lcd contrast */ diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig index 4883139..e6e0a82 100644 --- a/drivers/mtd/nand/Kconfig +++ b/drivers/mtd/nand/Kconfig @@ -49,13 +49,6 @@ config MTD_NAND_MUSEUM_IDS NAND chips (page size 256 byte, erase size 4-8KiB). The IDs of these chips were reused by later, larger chips. -config MTD_NAND_AUTCPU12 - tristate "SmartMediaCard on autronix autcpu12 board" - depends on ARCH_AUTCPU12 - help - This enables the driver for the autronix autcpu12 board to - access the SmartMediaCard. - config MTD_NAND_DENALI depends on PCI tristate "Support Denali NAND controller on Intel Moorestown" diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile index 2cbd091..0b1fca2 100644 --- a/drivers/mtd/nand/Makefile +++ b/drivers/mtd/nand/Makefile @@ -11,7 +11,6 @@ obj-$(CONFIG_MTD_SM_COMMON) += sm_common.o obj-$(CONFIG_MTD_NAND_CAFE) += cafe_nand.o obj-$(CONFIG_MTD_NAND_SPIA) += spia.o obj-$(CONFIG_MTD_NAND_AMS_DELTA) += ams-delta.o -obj-$(CONFIG_MTD_NAND_AUTCPU12) += autcpu12.o obj-$(CONFIG_MTD_NAND_DENALI) += denali.o obj-$(CONFIG_MTD_NAND_AU1550) += au1550nd.o obj-$(CONFIG_MTD_NAND_BF5XX) += bf5xx_nand.o diff --git a/drivers/mtd/nand/autcpu12.c b/drivers/mtd/nand/autcpu12.c deleted file mode 100644 index 04769a4..0000000 --- a/drivers/mtd/nand/autcpu12.c +++ /dev/null @@ -1,237 +0,0 @@ -/* - * drivers/mtd/autcpu12.c - * - * Copyright (c) 2002 Thomas Gleixner - * - * Derived from drivers/mtd/spia.c - * Copyright (C) 2000 Steven J. Hill (sjhill@realitydiluted.com) - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * Overview: - * This is a device driver for the NAND flash device found on the - * autronix autcpu12 board, which is a SmartMediaCard. It supports - * 16MiB, 32MiB and 64MiB cards. - * - * - * 02-12-2002 TG Cleanup of module params - * - * 02-20-2002 TG adjusted for different rd/wr address support - * added support for read device ready/busy line - * added page_cache - * - * 10-06-2002 TG 128K card support added - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -/* - * MTD structure for AUTCPU12 board - */ -static struct mtd_info *autcpu12_mtd = NULL; -static void __iomem *autcpu12_fio_base; - -/* - * Define partitions for flash devices - */ -static struct mtd_partition partition_info16k[] = { - { .name = "AUTCPU12 flash partition 1", - .offset = 0, - .size = 8 * SZ_1M }, - { .name = "AUTCPU12 flash partition 2", - .offset = 8 * SZ_1M, - .size = 8 * SZ_1M }, -}; - -static struct mtd_partition partition_info32k[] = { - { .name = "AUTCPU12 flash partition 1", - .offset = 0, - .size = 8 * SZ_1M }, - { .name = "AUTCPU12 flash partition 2", - .offset = 8 * SZ_1M, - .size = 24 * SZ_1M }, -}; - -static struct mtd_partition partition_info64k[] = { - { .name = "AUTCPU12 flash partition 1", - .offset = 0, - .size = 16 * SZ_1M }, - { .name = "AUTCPU12 flash partition 2", - .offset = 16 * SZ_1M, - .size = 48 * SZ_1M }, -}; - -static struct mtd_partition partition_info128k[] = { - { .name = "AUTCPU12 flash partition 1", - .offset = 0, - .size = 16 * SZ_1M }, - { .name = "AUTCPU12 flash partition 2", - .offset = 16 * SZ_1M, - .size = 112 * SZ_1M }, -}; - -#define NUM_PARTITIONS16K 2 -#define NUM_PARTITIONS32K 2 -#define NUM_PARTITIONS64K 2 -#define NUM_PARTITIONS128K 2 -/* - * hardware specific access to control-lines - * - * ALE bit 4 autcpu12_pedr - * CLE bit 5 autcpu12_pedr - * NCE bit 0 fio_ctrl - * - */ -static void autcpu12_hwcontrol(struct mtd_info *mtd, int cmd, - unsigned int ctrl) -{ - struct nand_chip *chip = mtd->priv; - - if (ctrl & NAND_CTRL_CHANGE) { - void __iomem *addr; - unsigned char bits; - - bits = clps_readb(AUTCPU12_SMC_PORT_OFFSET) & ~0x30; - bits |= (ctrl & NAND_CLE) << 4; - bits |= (ctrl & NAND_ALE) << 2; - clps_writeb(bits, AUTCPU12_SMC_PORT_OFFSET); - - addr = autcpu12_fio_base + AUTCPU12_SMC_SELECT_OFFSET; - writeb((readb(addr) & ~0x1) | (ctrl & NAND_NCE), addr); - } - - if (cmd != NAND_CMD_NONE) - writeb(cmd, chip->IO_ADDR_W); -} - -/* - * read device ready pin - */ -int autcpu12_device_ready(struct mtd_info *mtd) -{ - return clps_readb(AUTCPU12_SMC_PORT_OFFSET) & AUTCPU12_SMC_RDY; -} - -/* - * Main initialization routine - */ -static int __init autcpu12_init(void) -{ - struct nand_chip *this; - int err = 0; - - /* Allocate memory for MTD device structure and private data */ - autcpu12_mtd = kmalloc(sizeof(struct mtd_info) + sizeof(struct nand_chip), - GFP_KERNEL); - if (!autcpu12_mtd) { - printk("Unable to allocate AUTCPU12 NAND MTD device structure.\n"); - err = -ENOMEM; - goto out; - } - - /* map physical address */ - autcpu12_fio_base = ioremap(AUTCPU12_PHYS_SMC, SZ_1K); - if (!autcpu12_fio_base) { - printk("Ioremap autcpu12 SmartMedia Card failed\n"); - err = -EIO; - goto out_mtd; - } - - /* Get pointer to private data */ - this = (struct nand_chip *)(&autcpu12_mtd[1]); - - /* Initialize structures */ - memset(autcpu12_mtd, 0, sizeof(struct mtd_info)); - memset(this, 0, sizeof(struct nand_chip)); - - /* Link the private data with the MTD structure */ - autcpu12_mtd->priv = this; - autcpu12_mtd->owner = THIS_MODULE; - - /* Set address of NAND IO lines */ - this->IO_ADDR_R = autcpu12_fio_base; - this->IO_ADDR_W = autcpu12_fio_base; - this->cmd_ctrl = autcpu12_hwcontrol; - this->dev_ready = autcpu12_device_ready; - /* 20 us command delay time */ - this->chip_delay = 20; - this->ecc.mode = NAND_ECC_SOFT; - - /* Enable the following for a flash based bad block table */ - /* - this->bbt_options = NAND_BBT_USE_FLASH; - */ - this->bbt_options = NAND_BBT_USE_FLASH; - - /* Scan to find existence of the device */ - if (nand_scan(autcpu12_mtd, 1)) { - err = -ENXIO; - goto out_ior; - } - - /* Register the partitions */ - switch (autcpu12_mtd->size) { - case SZ_16M: - mtd_device_register(autcpu12_mtd, partition_info16k, - NUM_PARTITIONS16K); - break; - case SZ_32M: - mtd_device_register(autcpu12_mtd, partition_info32k, - NUM_PARTITIONS32K); - break; - case SZ_64M: - mtd_device_register(autcpu12_mtd, partition_info64k, - NUM_PARTITIONS64K); - break; - case SZ_128M: - mtd_device_register(autcpu12_mtd, partition_info128k, - NUM_PARTITIONS128K); - break; - default: - printk("Unsupported SmartMedia device\n"); - err = -ENXIO; - goto out_ior; - } - goto out; - - out_ior: - iounmap(autcpu12_fio_base); - out_mtd: - kfree(autcpu12_mtd); - out: - return err; -} - -module_init(autcpu12_init); - -/* - * Clean up routine - */ -static void __exit autcpu12_cleanup(void) -{ - /* Release resources, unregister device */ - nand_release(autcpu12_mtd); - - /* unmap physical address */ - iounmap(autcpu12_fio_base); - - /* Free the MTD device structure */ - kfree(autcpu12_mtd); -} - -module_exit(autcpu12_cleanup); - -MODULE_LICENSE("GPL"); -MODULE_AUTHOR("Thomas Gleixner "); -MODULE_DESCRIPTION("Glue layer for SmartMediaCard on autronix autcpu12"); -- cgit v0.10.2 From 87c37b51ade7d1296ab99ed8f237637bed7779c7 Mon Sep 17 00:00:00 2001 From: Alexander Shiyan Date: Sat, 17 Nov 2012 17:57:18 +0400 Subject: ARM: clps711x: Moving power management of framebuffer driver to the board This patch moves the power management for clps711x-framebuffer driver to the board code. To control we use "platform-lcd" driver. Signed-off-by: Alexander Shiyan Signed-off-by: Olof Johansson diff --git a/arch/arm/mach-clps711x/edb7211.c b/arch/arm/mach-clps711x/edb7211.c index cc32a65..81cc683 100644 --- a/arch/arm/mach-clps711x/edb7211.c +++ b/arch/arm/mach-clps711x/edb7211.c @@ -8,6 +8,8 @@ */ #include +#include +#include #include #include #include @@ -18,12 +20,17 @@ #include #include +#include