From f0949f73a75093fb86d6554101bd79046633a297 Mon Sep 17 00:00:00 2001 From: Mike Rapoport Date: Sat, 16 Apr 2011 22:29:29 +0000 Subject: omap: gpmc-smsc911x: always set irq flags to IORESOURCE_IRQ_LOWLEVEL SMSC911x devices attached to OMAP GPMC always use low level irqs. Setting the appropriate flag in the irq resourse strucure allows using .flags field in the omap_smsc911x_platform_data for driver specific flags Signed-off-by: Mike Rapoport Signed-off-by: Tony Lindgren diff --git a/arch/arm/mach-omap2/board-omap3logic.c b/arch/arm/mach-omap2/board-omap3logic.c index b726943..a49e6cf 100644 --- a/arch/arm/mach-omap2/board-omap3logic.c +++ b/arch/arm/mach-omap2/board-omap3logic.c @@ -147,7 +147,6 @@ static struct omap_smsc911x_platform_data __initdata board_smsc911x_data = { .cs = OMAP3LOGIC_SMSC911X_CS, .gpio_irq = -EINVAL, .gpio_reset = -EINVAL, - .flags = IORESOURCE_IRQ_LOWLEVEL, }; /* TODO/FIXME (comment by Peter Barada, LogicPD): diff --git a/arch/arm/mach-omap2/gpmc-smsc911x.c b/arch/arm/mach-omap2/gpmc-smsc911x.c index 703f150..b331f3c 100644 --- a/arch/arm/mach-omap2/gpmc-smsc911x.c +++ b/arch/arm/mach-omap2/gpmc-smsc911x.c @@ -30,7 +30,7 @@ static struct resource gpmc_smsc911x_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .flags = IORESOURCE_IRQ, + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL, }, }; @@ -79,8 +79,6 @@ void __init gpmc_smsc911x_init(struct omap_smsc911x_platform_data *board_data) gpio_direction_input(gpmc_cfg->gpio_irq); gpmc_smsc911x_resources[1].start = gpio_to_irq(gpmc_cfg->gpio_irq); - gpmc_smsc911x_resources[1].flags |= - (gpmc_cfg->flags & IRQF_TRIGGER_MASK); if (gpio_is_valid(gpmc_cfg->gpio_reset)) { ret = gpio_request(gpmc_cfg->gpio_reset, "smsc911x reset"); @@ -96,6 +94,9 @@ void __init gpmc_smsc911x_init(struct omap_smsc911x_platform_data *board_data) gpio_set_value(gpmc_cfg->gpio_reset, 1); } + if (gpmc_cfg->flags) + gpmc_smsc911x_config.flags = gpmc_cfg->flags; + if (platform_device_register(&gpmc_smsc911x_device) < 0) { printk(KERN_ERR "Unable to register smsc911x device\n"); gpio_free(gpmc_cfg->gpio_reset); -- cgit v0.10.2 From 21b42731e6ab1ccbbe9ad1b639c5d78eecad8432 Mon Sep 17 00:00:00 2001 From: Mike Rapoport Date: Sat, 16 Apr 2011 22:29:30 +0000 Subject: omap: convert boards that use SMSC911x to use gpmc-smsc911x Convert boards that use SMSC911x to use gpmc-smsc911x. Also allocate struct platform_device dynamically. Signed-off-by: Mike Rapoport Signed-off-by: Igor Grinberg [tony@atomide.com: folded in a fix from Igor Grindberg] Signed-off-by: Tony Lindgren diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c index 02a12b4..7c70f56 100644 --- a/arch/arm/mach-omap2/board-cm-t35.c +++ b/arch/arm/mach-omap2/board-cm-t35.c @@ -66,86 +66,28 @@ #if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE) #include +#include -static struct smsc911x_platform_config cm_t35_smsc911x_config = { - .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW, - .irq_type = SMSC911X_IRQ_TYPE_OPEN_DRAIN, - .flags = SMSC911X_USE_32BIT | SMSC911X_SAVE_MAC_ADDRESS, - .phy_interface = PHY_INTERFACE_MODE_MII, -}; - -static struct resource cm_t35_smsc911x_resources[] = { - { - .flags = IORESOURCE_MEM, - }, - { - .start = OMAP_GPIO_IRQ(CM_T35_SMSC911X_GPIO), - .end = OMAP_GPIO_IRQ(CM_T35_SMSC911X_GPIO), - .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL, - }, -}; - -static struct platform_device cm_t35_smsc911x_device = { - .name = "smsc911x", +static struct omap_smsc911x_platform_data cm_t35_smsc911x_cfg = { .id = 0, - .num_resources = ARRAY_SIZE(cm_t35_smsc911x_resources), - .resource = cm_t35_smsc911x_resources, - .dev = { - .platform_data = &cm_t35_smsc911x_config, - }, -}; - -static struct resource sb_t35_smsc911x_resources[] = { - { - .flags = IORESOURCE_MEM, - }, - { - .start = OMAP_GPIO_IRQ(SB_T35_SMSC911X_GPIO), - .end = OMAP_GPIO_IRQ(SB_T35_SMSC911X_GPIO), - .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL, - }, + .cs = CM_T35_SMSC911X_CS, + .gpio_irq = CM_T35_SMSC911X_GPIO, + .gpio_reset = -EINVAL, + .flags = SMSC911X_USE_32BIT | SMSC911X_SAVE_MAC_ADDRESS, }; -static struct platform_device sb_t35_smsc911x_device = { - .name = "smsc911x", +static struct omap_smsc911x_platform_data sb_t35_smsc911x_cfg = { .id = 1, - .num_resources = ARRAY_SIZE(sb_t35_smsc911x_resources), - .resource = sb_t35_smsc911x_resources, - .dev = { - .platform_data = &cm_t35_smsc911x_config, - }, + .cs = SB_T35_SMSC911X_CS, + .gpio_irq = SB_T35_SMSC911X_GPIO, + .gpio_reset = -EINVAL, + .flags = SMSC911X_USE_32BIT | SMSC911X_SAVE_MAC_ADDRESS, }; -static void __init cm_t35_init_smsc911x(struct platform_device *dev, - int cs, int irq_gpio) -{ - unsigned long cs_mem_base; - - if (gpmc_cs_request(cs, SZ_16M, &cs_mem_base) < 0) { - pr_err("CM-T35: Failed request for GPMC mem for smsc911x\n"); - return; - } - - dev->resource[0].start = cs_mem_base + 0x0; - dev->resource[0].end = cs_mem_base + 0xff; - - if ((gpio_request(irq_gpio, "ETH IRQ") == 0) && - (gpio_direction_input(irq_gpio) == 0)) { - gpio_export(irq_gpio, 0); - } else { - pr_err("CM-T35: could not obtain gpio for SMSC911X IRQ\n"); - return; - } - - platform_device_register(dev); -} - static void __init cm_t35_init_ethernet(void) { - cm_t35_init_smsc911x(&cm_t35_smsc911x_device, - CM_T35_SMSC911X_CS, CM_T35_SMSC911X_GPIO); - cm_t35_init_smsc911x(&sb_t35_smsc911x_device, - SB_T35_SMSC911X_CS, SB_T35_SMSC911X_GPIO); + gpmc_smsc911x_init(&cm_t35_smsc911x_cfg); + gpmc_smsc911x_init(&sb_t35_smsc911x_cfg); } #else static inline void __init cm_t35_init_ethernet(void) { return; } diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c index 34cf982..5b9bde7 100644 --- a/arch/arm/mach-omap2/board-igep0020.c +++ b/arch/arm/mach-omap2/board-igep0020.c @@ -192,57 +192,18 @@ static void __init igep2_flash_init(void) {} #if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE) #include +#include -static struct smsc911x_platform_config igep2_smsc911x_config = { - .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW, - .irq_type = SMSC911X_IRQ_TYPE_OPEN_DRAIN, - .flags = SMSC911X_USE_32BIT | SMSC911X_SAVE_MAC_ADDRESS , - .phy_interface = PHY_INTERFACE_MODE_MII, -}; - -static struct resource igep2_smsc911x_resources[] = { - { - .flags = IORESOURCE_MEM, - }, - { - .start = OMAP_GPIO_IRQ(IGEP2_SMSC911X_GPIO), - .end = OMAP_GPIO_IRQ(IGEP2_SMSC911X_GPIO), - .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL, - }, -}; - -static struct platform_device igep2_smsc911x_device = { - .name = "smsc911x", - .id = 0, - .num_resources = ARRAY_SIZE(igep2_smsc911x_resources), - .resource = igep2_smsc911x_resources, - .dev = { - .platform_data = &igep2_smsc911x_config, - }, +static struct omap_smsc911x_platform_data smsc911x_cfg = { + .cs = IGEP2_SMSC911X_CS, + .gpio_irq = IGEP2_SMSC911X_GPIO, + .gpio_reset = -EINVAL, + .flags = SMSC911X_USE_32BIT | SMSC911X_SAVE_MAC_ADDRESS, }; static inline void __init igep2_init_smsc911x(void) { - unsigned long cs_mem_base; - - if (gpmc_cs_request(IGEP2_SMSC911X_CS, SZ_16M, &cs_mem_base) < 0) { - pr_err("IGEP v2: Failed request for GPMC mem for smsc911x\n"); - gpmc_cs_free(IGEP2_SMSC911X_CS); - return; - } - - igep2_smsc911x_resources[0].start = cs_mem_base + 0x0; - igep2_smsc911x_resources[0].end = cs_mem_base + 0xff; - - if ((gpio_request(IGEP2_SMSC911X_GPIO, "SMSC911X IRQ") == 0) && - (gpio_direction_input(IGEP2_SMSC911X_GPIO) == 0)) { - gpio_export(IGEP2_SMSC911X_GPIO, 0); - } else { - pr_err("IGEP v2: Could not obtain gpio for for SMSC911X IRQ\n"); - return; - } - - platform_device_register(&igep2_smsc911x_device); + gpmc_smsc911x_init(&smsc911x_cfg); } #else diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c index e2ba779..ea9f049 100644 --- a/arch/arm/mach-omap2/board-ldp.c +++ b/arch/arm/mach-omap2/board-ldp.c @@ -43,6 +43,7 @@ #include #include +#include #include "board-flash.h" #include "mux.h" @@ -54,36 +55,6 @@ #define DEBUG_BASE 0x08000000 #define LDP_ETHR_START DEBUG_BASE -static struct resource ldp_smsc911x_resources[] = { - [0] = { - .start = LDP_ETHR_START, - .end = LDP_ETHR_START + SZ_4K, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = 0, - .end = 0, - .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL, - }, -}; - -static struct smsc911x_platform_config ldp_smsc911x_config = { - .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW, - .irq_type = SMSC911X_IRQ_TYPE_OPEN_DRAIN, - .flags = SMSC911X_USE_32BIT, - .phy_interface = PHY_INTERFACE_MODE_MII, -}; - -static struct platform_device ldp_smsc911x_device = { - .name = "smsc911x", - .id = -1, - .num_resources = ARRAY_SIZE(ldp_smsc911x_resources), - .resource = ldp_smsc911x_resources, - .dev = { - .platform_data = &ldp_smsc911x_config, - }, -}; - static uint32_t board_keymap[] = { KEY(0, 0, KEY_1), KEY(1, 0, KEY_2), @@ -246,33 +217,16 @@ static struct spi_board_info ldp_spi_board_info[] __initdata = { }, }; +static struct omap_smsc911x_platform_data smsc911x_cfg = { + .cs = LDP_SMSC911X_CS, + .gpio_irq = LDP_SMSC911X_GPIO, + .gpio_reset = -EINVAL, + .flags = SMSC911X_USE_32BIT, +}; + static inline void __init ldp_init_smsc911x(void) { - int eth_cs; - unsigned long cs_mem_base; - int eth_gpio = 0; - - eth_cs = LDP_SMSC911X_CS; - - if (gpmc_cs_request(eth_cs, SZ_16M, &cs_mem_base) < 0) { - printk(KERN_ERR "Failed to request GPMC mem for smsc911x\n"); - return; - } - - ldp_smsc911x_resources[0].start = cs_mem_base + 0x0; - ldp_smsc911x_resources[0].end = cs_mem_base + 0xff; - udelay(100); - - eth_gpio = LDP_SMSC911X_GPIO; - - ldp_smsc911x_resources[1].start = OMAP_GPIO_IRQ(eth_gpio); - - if (gpio_request(eth_gpio, "smsc911x irq") < 0) { - printk(KERN_ERR "Failed to request GPIO%d for smsc911x IRQ\n", - eth_gpio); - return; - } - gpio_direction_input(eth_gpio); + gpmc_smsc911x_init(&smsc911x_cfg); } static struct platform_device ldp_lcd_device = { @@ -389,7 +343,6 @@ static struct omap2_hsmmc_info mmc[] __initdata = { }; static struct platform_device *ldp_devices[] __initdata = { - &ldp_smsc911x_device, &ldp_lcd_device, &ldp_gpio_keys_device, }; diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c index 5a1a916..3fc85c6 100644 --- a/arch/arm/mach-omap2/board-omap3evm.c +++ b/arch/arm/mach-omap2/board-omap3evm.c @@ -101,49 +101,20 @@ static void __init omap3_evm_get_revision(void) } #if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE) -static struct resource omap3evm_smsc911x_resources[] = { - [0] = { - .start = OMAP3EVM_ETHR_START, - .end = (OMAP3EVM_ETHR_START + OMAP3EVM_ETHR_SIZE - 1), - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = OMAP_GPIO_IRQ(OMAP3EVM_ETHR_GPIO_IRQ), - .end = OMAP_GPIO_IRQ(OMAP3EVM_ETHR_GPIO_IRQ), - .flags = (IORESOURCE_IRQ | IRQF_TRIGGER_LOW), - }, -}; +#include -static struct smsc911x_platform_config smsc911x_config = { - .phy_interface = PHY_INTERFACE_MODE_MII, - .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW, - .irq_type = SMSC911X_IRQ_TYPE_OPEN_DRAIN, - .flags = (SMSC911X_USE_32BIT | SMSC911X_SAVE_MAC_ADDRESS), -}; - -static struct platform_device omap3evm_smsc911x_device = { - .name = "smsc911x", - .id = -1, - .num_resources = ARRAY_SIZE(omap3evm_smsc911x_resources), - .resource = &omap3evm_smsc911x_resources[0], - .dev = { - .platform_data = &smsc911x_config, - }, +static struct omap_smsc911x_platform_data smsc911x_cfg = { + .cs = OMAP3EVM_SMSC911X_CS, + .gpio_irq = OMAP3EVM_ETHR_GPIO_IRQ, + .gpio_reset = -EINVAL, + .flags = SMSC911X_USE_32BIT | SMSC911X_SAVE_MAC_ADDRESS, }; static inline void __init omap3evm_init_smsc911x(void) { - int eth_cs, eth_rst; struct clk *l3ck; unsigned int rate; - if (get_omap3_evm_rev() == OMAP3EVM_BOARD_GEN_1) - eth_rst = OMAP3EVM_GEN1_ETHR_GPIO_RST; - else - eth_rst = OMAP3EVM_GEN2_ETHR_GPIO_RST; - - eth_cs = OMAP3EVM_SMSC911X_CS; - l3ck = clk_get(NULL, "l3_ck"); if (IS_ERR(l3ck)) rate = 100000000; @@ -152,33 +123,13 @@ static inline void __init omap3evm_init_smsc911x(void) /* Configure ethernet controller reset gpio */ if (cpu_is_omap3430()) { - if (gpio_request(eth_rst, "SMSC911x gpio") < 0) { - pr_err(KERN_ERR "Failed to request %d for smsc911x\n", - eth_rst); - return; - } - - if (gpio_direction_output(eth_rst, 1) < 0) { - pr_err(KERN_ERR "Failed to set direction of %d for" \ - " smsc911x\n", eth_rst); - return; - } - /* reset pulse to ethernet controller*/ - usleep_range(150, 220); - gpio_set_value(eth_rst, 0); - usleep_range(150, 220); - gpio_set_value(eth_rst, 1); - usleep_range(1, 2); - } - - if (gpio_request(OMAP3EVM_ETHR_GPIO_IRQ, "SMSC911x irq") < 0) { - printk(KERN_ERR "Failed to request GPIO%d for smsc911x IRQ\n", - OMAP3EVM_ETHR_GPIO_IRQ); - return; + if (get_omap3_evm_rev() == OMAP3EVM_BOARD_GEN_1) + smsc911x_cfg.gpio_reset = OMAP3EVM_GEN1_ETHR_GPIO_RST; + else + smsc911x_cfg.gpio_reset = OMAP3EVM_GEN2_ETHR_GPIO_RST; } - gpio_direction_input(OMAP3EVM_ETHR_GPIO_IRQ); - platform_device_register(&omap3evm_smsc911x_device); + gpmc_smsc911x_init(&smsc911x_cfg); } #else diff --git a/arch/arm/mach-omap2/board-omap3stalker.c b/arch/arm/mach-omap2/board-omap3stalker.c index a6e0b91..848016c 100644 --- a/arch/arm/mach-omap2/board-omap3stalker.c +++ b/arch/arm/mach-omap2/board-omap3stalker.c @@ -56,50 +56,25 @@ #include "timer-gp.h" #if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE) +#include + #define OMAP3STALKER_ETHR_START 0x2c000000 #define OMAP3STALKER_ETHR_SIZE 1024 #define OMAP3STALKER_ETHR_GPIO_IRQ 19 #define OMAP3STALKER_SMC911X_CS 5 -static struct resource omap3stalker_smsc911x_resources[] = { - [0] = { - .start = OMAP3STALKER_ETHR_START, - .end = - (OMAP3STALKER_ETHR_START + OMAP3STALKER_ETHR_SIZE - 1), - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = OMAP_GPIO_IRQ(OMAP3STALKER_ETHR_GPIO_IRQ), - .end = OMAP_GPIO_IRQ(OMAP3STALKER_ETHR_GPIO_IRQ), - .flags = (IORESOURCE_IRQ | IRQF_TRIGGER_LOW), - }, -}; - -static struct smsc911x_platform_config smsc911x_config = { - .phy_interface = PHY_INTERFACE_MODE_MII, - .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW, - .irq_type = SMSC911X_IRQ_TYPE_OPEN_DRAIN, +static struct omap_smsc911x_platform_data smsc911x_cfg = { + .cs = OMAP3STALKER_SMC911X_CS, + .gpio_irq = OMAP3STALKER_ETHR_GPIO_IRQ, + .gpio_reset = -EINVAL, .flags = (SMSC911X_USE_32BIT | SMSC911X_SAVE_MAC_ADDRESS), }; -static struct platform_device omap3stalker_smsc911x_device = { - .name = "smsc911x", - .id = -1, - .num_resources = ARRAY_SIZE(omap3stalker_smsc911x_resources), - .resource = &omap3stalker_smsc911x_resources[0], - .dev = { - .platform_data = &smsc911x_config, - }, -}; - static inline void __init omap3stalker_init_eth(void) { - int eth_cs; struct clk *l3ck; unsigned int rate; - eth_cs = OMAP3STALKER_SMC911X_CS; - l3ck = clk_get(NULL, "l3_ck"); if (IS_ERR(l3ck)) rate = 100000000; @@ -107,16 +82,7 @@ static inline void __init omap3stalker_init_eth(void) rate = clk_get_rate(l3ck); omap_mux_init_gpio(19, OMAP_PIN_INPUT_PULLUP); - if (gpio_request(OMAP3STALKER_ETHR_GPIO_IRQ, "SMC911x irq") < 0) { - printk(KERN_ERR - "Failed to request GPIO%d for smc911x IRQ\n", - OMAP3STALKER_ETHR_GPIO_IRQ); - return; - } - - gpio_direction_input(OMAP3STALKER_ETHR_GPIO_IRQ); - - platform_device_register(&omap3stalker_smsc911x_device); + gpmc_smsc911x_init(&smsc911x_cfg); } #else diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c index 59ca333..165e1fa 100644 --- a/arch/arm/mach-omap2/board-overo.c +++ b/arch/arm/mach-omap2/board-overo.c @@ -146,106 +146,28 @@ static inline void __init overo_ads7846_init(void) { return; } #if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE) #include +#include -static struct resource overo_smsc911x_resources[] = { - { - .name = "smsc911x-memory", - .flags = IORESOURCE_MEM, - }, - { - .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL, - }, -}; - -static struct resource overo_smsc911x2_resources[] = { - { - .name = "smsc911x2-memory", - .flags = IORESOURCE_MEM, - }, - { - .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL, - }, -}; - -static struct smsc911x_platform_config overo_smsc911x_config = { - .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW, - .irq_type = SMSC911X_IRQ_TYPE_OPEN_DRAIN, - .flags = SMSC911X_USE_32BIT , - .phy_interface = PHY_INTERFACE_MODE_MII, -}; - -static struct platform_device overo_smsc911x_device = { - .name = "smsc911x", +static struct omap_smsc911x_platform_data smsc911x_cfg = { .id = 0, - .num_resources = ARRAY_SIZE(overo_smsc911x_resources), - .resource = overo_smsc911x_resources, - .dev = { - .platform_data = &overo_smsc911x_config, - }, + .cs = OVERO_SMSC911X_CS, + .gpio_irq = OVERO_SMSC911X_GPIO, + .gpio_reset = -EINVAL, + .flags = SMSC911X_USE_32BIT, }; -static struct platform_device overo_smsc911x2_device = { - .name = "smsc911x", +static struct omap_smsc911x_platform_data smsc911x2_cfg = { .id = 1, - .num_resources = ARRAY_SIZE(overo_smsc911x2_resources), - .resource = overo_smsc911x2_resources, - .dev = { - .platform_data = &overo_smsc911x_config, - }, -}; - -static struct platform_device *smsc911x_devices[] = { - &overo_smsc911x_device, - &overo_smsc911x2_device, + .cs = OVERO_SMSC911X2_CS, + .gpio_irq = OVERO_SMSC911X2_GPIO, + .gpio_reset = -EINVAL, + .flags = SMSC911X_USE_32BIT, }; -static inline void __init overo_init_smsc911x(void) +static void __init overo_init_smsc911x(void) { - unsigned long cs_mem_base, cs_mem_base2; - - /* set up first smsc911x chip */ - - if (gpmc_cs_request(OVERO_SMSC911X_CS, SZ_16M, &cs_mem_base) < 0) { - printk(KERN_ERR "Failed request for GPMC mem for smsc911x\n"); - return; - } - - overo_smsc911x_resources[0].start = cs_mem_base + 0x0; - overo_smsc911x_resources[0].end = cs_mem_base + 0xff; - - if ((gpio_request(OVERO_SMSC911X_GPIO, "SMSC911X IRQ") == 0) && - (gpio_direction_input(OVERO_SMSC911X_GPIO) == 0)) { - gpio_export(OVERO_SMSC911X_GPIO, 0); - } else { - printk(KERN_ERR "could not obtain gpio for SMSC911X IRQ\n"); - return; - } - - overo_smsc911x_resources[1].start = OMAP_GPIO_IRQ(OVERO_SMSC911X_GPIO); - overo_smsc911x_resources[1].end = 0; - - /* set up second smsc911x chip */ - - if (gpmc_cs_request(OVERO_SMSC911X2_CS, SZ_16M, &cs_mem_base2) < 0) { - printk(KERN_ERR "Failed request for GPMC mem for smsc911x2\n"); - return; - } - - overo_smsc911x2_resources[0].start = cs_mem_base2 + 0x0; - overo_smsc911x2_resources[0].end = cs_mem_base2 + 0xff; - - if ((gpio_request(OVERO_SMSC911X2_GPIO, "SMSC911X2 IRQ") == 0) && - (gpio_direction_input(OVERO_SMSC911X2_GPIO) == 0)) { - gpio_export(OVERO_SMSC911X2_GPIO, 0); - } else { - printk(KERN_ERR "could not obtain gpio for SMSC911X2 IRQ\n"); - return; - } - - overo_smsc911x2_resources[1].start = OMAP_GPIO_IRQ(OVERO_SMSC911X2_GPIO); - overo_smsc911x2_resources[1].end = 0; - - platform_add_devices(smsc911x_devices, ARRAY_SIZE(smsc911x_devices)); + gpmc_smsc911x_init(&smsc911x_cfg); + gpmc_smsc911x_init(&smsc911x2_cfg); } #else diff --git a/arch/arm/mach-omap2/board-zoom-debugboard.c b/arch/arm/mach-omap2/board-zoom-debugboard.c index 007ebdc..2ee9ab9 100644 --- a/arch/arm/mach-omap2/board-zoom-debugboard.c +++ b/arch/arm/mach-omap2/board-zoom-debugboard.c @@ -15,6 +15,7 @@ #include #include +#include #include @@ -26,60 +27,16 @@ #define DEBUG_BASE 0x08000000 #define ZOOM_ETHR_START DEBUG_BASE -static struct resource zoom_smsc911x_resources[] = { - [0] = { - .start = ZOOM_ETHR_START, - .end = ZOOM_ETHR_START + SZ_4K, - .flags = IORESOURCE_MEM, - }, - [1] = { - .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL, - }, -}; - -static struct smsc911x_platform_config zoom_smsc911x_config = { - .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW, - .irq_type = SMSC911X_IRQ_TYPE_OPEN_DRAIN, +static struct omap_smsc911x_platform_data zoom_smsc911x_cfg = { + .cs = ZOOM_SMSC911X_CS, + .gpio_irq = ZOOM_SMSC911X_GPIO, + .gpio_reset = -EINVAL, .flags = SMSC911X_USE_32BIT, - .phy_interface = PHY_INTERFACE_MODE_MII, -}; - -static struct platform_device zoom_smsc911x_device = { - .name = "smsc911x", - .id = -1, - .num_resources = ARRAY_SIZE(zoom_smsc911x_resources), - .resource = zoom_smsc911x_resources, - .dev = { - .platform_data = &zoom_smsc911x_config, - }, }; static inline void __init zoom_init_smsc911x(void) { - int eth_cs; - unsigned long cs_mem_base; - int eth_gpio = 0; - - eth_cs = ZOOM_SMSC911X_CS; - - if (gpmc_cs_request(eth_cs, SZ_16M, &cs_mem_base) < 0) { - printk(KERN_ERR "Failed to request GPMC mem for smsc911x\n"); - return; - } - - zoom_smsc911x_resources[0].start = cs_mem_base + 0x0; - zoom_smsc911x_resources[0].end = cs_mem_base + 0xff; - - eth_gpio = ZOOM_SMSC911X_GPIO; - - zoom_smsc911x_resources[1].start = OMAP_GPIO_IRQ(eth_gpio); - - if (gpio_request(eth_gpio, "smsc911x irq") < 0) { - printk(KERN_ERR "Failed to request GPIO%d for smsc911x IRQ\n", - eth_gpio); - return; - } - gpio_direction_input(eth_gpio); + gpmc_smsc911x_init(&zoom_smsc911x_cfg); } static struct plat_serial8250_port serial_platform_data[] = { @@ -150,7 +107,6 @@ static inline int omap_zoom_debugboard_detect(void) } static struct platform_device *zoom_devices[] __initdata = { - &zoom_smsc911x_device, &zoom_debugboard_serial_device, }; diff --git a/arch/arm/mach-omap2/gpmc-smsc911x.c b/arch/arm/mach-omap2/gpmc-smsc911x.c index b331f3c..d30293a 100644 --- a/arch/arm/mach-omap2/gpmc-smsc911x.c +++ b/arch/arm/mach-omap2/gpmc-smsc911x.c @@ -41,16 +41,6 @@ static struct smsc911x_platform_config gpmc_smsc911x_config = { .flags = SMSC911X_USE_16BIT, }; -static struct platform_device gpmc_smsc911x_device = { - .name = "smsc911x", - .id = -1, - .num_resources = ARRAY_SIZE(gpmc_smsc911x_resources), - .resource = gpmc_smsc911x_resources, - .dev = { - .platform_data = &gpmc_smsc911x_config, - }, -}; - /* * Initialize smsc911x device connected to the GPMC. Note that we * assume that pin multiplexing is done in the board-*.c file, @@ -58,6 +48,7 @@ static struct platform_device gpmc_smsc911x_device = { */ void __init gpmc_smsc911x_init(struct omap_smsc911x_platform_data *board_data) { + struct platform_device *pdev; unsigned long cs_mem_base; int ret; @@ -97,7 +88,10 @@ void __init gpmc_smsc911x_init(struct omap_smsc911x_platform_data *board_data) if (gpmc_cfg->flags) gpmc_smsc911x_config.flags = gpmc_cfg->flags; - if (platform_device_register(&gpmc_smsc911x_device) < 0) { + pdev = platform_device_register_resndata(NULL, "smsc911x", gpmc_cfg->id, + gpmc_smsc911x_resources, ARRAY_SIZE(gpmc_smsc911x_resources), + &gpmc_smsc911x_config, sizeof(gpmc_smsc911x_config)); + if (!pdev) { printk(KERN_ERR "Unable to register smsc911x device\n"); gpio_free(gpmc_cfg->gpio_reset); goto free2; diff --git a/arch/arm/plat-omap/include/plat/gpmc-smsc911x.h b/arch/arm/plat-omap/include/plat/gpmc-smsc911x.h index 872de0bf..d3f1579 100644 --- a/arch/arm/plat-omap/include/plat/gpmc-smsc911x.h +++ b/arch/arm/plat-omap/include/plat/gpmc-smsc911x.h @@ -14,6 +14,7 @@ #ifndef __ASM_ARCH_OMAP_GPMC_SMSC911X_H__ struct omap_smsc911x_platform_data { + int id; int cs; int gpio_irq; int gpio_reset; -- cgit v0.10.2 From 11383a9bcc213cd2b55e2aef863ef2a8b3d7b62c Mon Sep 17 00:00:00 2001 From: Igor Grinberg Date: Tue, 26 Apr 2011 16:25:56 +0000 Subject: arm: omap: gpmc-smsc911x: minor style fixes replace "printk(KERN_ERR" by "pr_err(" and fix needlessly multi-lined #ifdef Signed-off-by: Igor Grinberg Acked-by: Nishanth Menon Signed-off-by: Tony Lindgren diff --git a/arch/arm/mach-omap2/gpmc-smsc911x.c b/arch/arm/mach-omap2/gpmc-smsc911x.c index d30293a..e09374a 100644 --- a/arch/arm/mach-omap2/gpmc-smsc911x.c +++ b/arch/arm/mach-omap2/gpmc-smsc911x.c @@ -10,6 +10,7 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ +#define pr_fmt(fmt) "%s: " fmt, __func__ #include #include @@ -55,7 +56,7 @@ void __init gpmc_smsc911x_init(struct omap_smsc911x_platform_data *board_data) gpmc_cfg = board_data; if (gpmc_cs_request(gpmc_cfg->cs, SZ_16M, &cs_mem_base) < 0) { - printk(KERN_ERR "Failed to request GPMC mem for smsc911x\n"); + pr_err("Failed to request GPMC mem region\n"); return; } @@ -63,8 +64,7 @@ void __init gpmc_smsc911x_init(struct omap_smsc911x_platform_data *board_data) gpmc_smsc911x_resources[0].end = cs_mem_base + 0xff; if (gpio_request(gpmc_cfg->gpio_irq, "smsc911x irq") < 0) { - printk(KERN_ERR "Failed to request GPIO%d for smsc911x IRQ\n", - gpmc_cfg->gpio_irq); + pr_err("Failed to request IRQ GPIO%d\n", gpmc_cfg->gpio_irq); goto free1; } @@ -74,8 +74,8 @@ void __init gpmc_smsc911x_init(struct omap_smsc911x_platform_data *board_data) if (gpio_is_valid(gpmc_cfg->gpio_reset)) { ret = gpio_request(gpmc_cfg->gpio_reset, "smsc911x reset"); if (ret) { - printk(KERN_ERR "Failed to request GPIO%d for smsc911x reset\n", - gpmc_cfg->gpio_reset); + pr_err("Failed to request reset GPIO%d\n", + gpmc_cfg->gpio_reset); goto free2; } @@ -92,7 +92,7 @@ void __init gpmc_smsc911x_init(struct omap_smsc911x_platform_data *board_data) gpmc_smsc911x_resources, ARRAY_SIZE(gpmc_smsc911x_resources), &gpmc_smsc911x_config, sizeof(gpmc_smsc911x_config)); if (!pdev) { - printk(KERN_ERR "Unable to register smsc911x device\n"); + pr_err("Unable to register platform device\n"); gpio_free(gpmc_cfg->gpio_reset); goto free2; } @@ -104,5 +104,5 @@ free2: free1: gpmc_cs_free(gpmc_cfg->cs); - printk(KERN_ERR "Could not initialize smsc911x\n"); + pr_err("Could not initialize smsc911x device\n"); } diff --git a/arch/arm/plat-omap/include/plat/gpmc-smsc911x.h b/arch/arm/plat-omap/include/plat/gpmc-smsc911x.h index d3f1579..ea6c9c8 100644 --- a/arch/arm/plat-omap/include/plat/gpmc-smsc911x.h +++ b/arch/arm/plat-omap/include/plat/gpmc-smsc911x.h @@ -21,8 +21,7 @@ struct omap_smsc911x_platform_data { u32 flags; }; -#if defined(CONFIG_SMSC911X) || \ - defined(CONFIG_SMSC911X_MODULE) +#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE) extern void gpmc_smsc911x_init(struct omap_smsc911x_platform_data *d); -- cgit v0.10.2 From 7529b703869d59e799a0c0eb4f3df7a418f7dc99 Mon Sep 17 00:00:00 2001 From: omar ramirez Date: Mon, 18 Apr 2011 16:39:41 +0000 Subject: OMAP3/4: l3: fix omap3_l3_probe error path l3_smx: - Add missing free_irq and remove an empty goto label. l3_noc: - If kzalloc fails driver shouldn't continue with a NULL pointer. - Add missing free_irq and remove empty goto labels. - Safe to assume that if we reached the end point of execution without errors, then return value is 0, so replacing instead another goto. Signed-off-by: Omar Ramirez Luna Acked-by: Santosh Shilimkar Signed-off-by: Tony Lindgren diff --git a/arch/arm/mach-omap2/omap_l3_noc.c b/arch/arm/mach-omap2/omap_l3_noc.c index 82632c2..def3de8 100644 --- a/arch/arm/mach-omap2/omap_l3_noc.c +++ b/arch/arm/mach-omap2/omap_l3_noc.c @@ -132,49 +132,49 @@ static int __init omap4_l3_probe(struct platform_device *pdev) l3 = kzalloc(sizeof(*l3), GFP_KERNEL); if (!l3) - ret = -ENOMEM; + return -ENOMEM; platform_set_drvdata(pdev, l3); res = platform_get_resource(pdev, IORESOURCE_MEM, 0); if (!res) { dev_err(&pdev->dev, "couldn't find resource 0\n"); ret = -ENODEV; - goto err1; + goto err0; } l3->l3_base[0] = ioremap(res->start, resource_size(res)); if (!(l3->l3_base[0])) { dev_err(&pdev->dev, "ioremap failed\n"); ret = -ENOMEM; - goto err2; + goto err0; } res = platform_get_resource(pdev, IORESOURCE_MEM, 1); if (!res) { dev_err(&pdev->dev, "couldn't find resource 1\n"); ret = -ENODEV; - goto err3; + goto err1; } l3->l3_base[1] = ioremap(res->start, resource_size(res)); if (!(l3->l3_base[1])) { dev_err(&pdev->dev, "ioremap failed\n"); ret = -ENOMEM; - goto err4; + goto err1; } res = platform_get_resource(pdev, IORESOURCE_MEM, 2); if (!res) { dev_err(&pdev->dev, "couldn't find resource 2\n"); ret = -ENODEV; - goto err5; + goto err2; } l3->l3_base[2] = ioremap(res->start, resource_size(res)); if (!(l3->l3_base[2])) { dev_err(&pdev->dev, "ioremap failed\n"); ret = -ENOMEM; - goto err6; + goto err2; } /* @@ -187,7 +187,7 @@ static int __init omap4_l3_probe(struct platform_device *pdev) if (ret) { pr_crit("L3: request_irq failed to register for 0x%x\n", OMAP44XX_IRQ_L3_DBG); - goto err7; + goto err3; } l3->debug_irq = irq; @@ -198,24 +198,22 @@ static int __init omap4_l3_probe(struct platform_device *pdev) if (ret) { pr_crit("L3: request_irq failed to register for 0x%x\n", OMAP44XX_IRQ_L3_APP); - goto err8; + goto err4; } l3->app_irq = irq; - goto err0; -err8: -err7: - iounmap(l3->l3_base[2]); -err6: -err5: - iounmap(l3->l3_base[1]); + return 0; + err4: + free_irq(l3->debug_irq, l3); err3: - iounmap(l3->l3_base[0]); + iounmap(l3->l3_base[2]); err2: + iounmap(l3->l3_base[1]); err1: - kfree(l3); + iounmap(l3->l3_base[0]); err0: + kfree(l3); return ret; } diff --git a/arch/arm/mach-omap2/omap_l3_smx.c b/arch/arm/mach-omap2/omap_l3_smx.c index 5f2da756..45aaa5c 100644 --- a/arch/arm/mach-omap2/omap_l3_smx.c +++ b/arch/arm/mach-omap2/omap_l3_smx.c @@ -228,10 +228,8 @@ static int __init omap3_l3_probe(struct platform_device *pdev) int ret; l3 = kzalloc(sizeof(*l3), GFP_KERNEL); - if (!l3) { - ret = -ENOMEM; - goto err0; - } + if (!l3) + return -ENOMEM; platform_set_drvdata(pdev, l3); @@ -239,13 +237,13 @@ static int __init omap3_l3_probe(struct platform_device *pdev) if (!res) { dev_err(&pdev->dev, "couldn't find resource\n"); ret = -ENODEV; - goto err1; + goto err0; } l3->rt = ioremap(res->start, resource_size(res)); if (!(l3->rt)) { dev_err(&pdev->dev, "ioremap failed\n"); ret = -ENOMEM; - goto err2; + goto err0; } l3->debug_irq = platform_get_irq(pdev, 0); @@ -254,7 +252,7 @@ static int __init omap3_l3_probe(struct platform_device *pdev) "l3-debug-irq", l3); if (ret) { dev_err(&pdev->dev, "couldn't request debug irq\n"); - goto err3; + goto err1; } l3->app_irq = platform_get_irq(pdev, 1); @@ -264,18 +262,17 @@ static int __init omap3_l3_probe(struct platform_device *pdev) if (ret) { dev_err(&pdev->dev, "couldn't request app irq\n"); - goto err4; + goto err2; } - goto err0; + return 0; -err4: -err3: - iounmap(l3->rt); err2: + free_irq(l3->debug_irq, l3); err1: - kfree(l3); + iounmap(l3->rt); err0: + kfree(l3); return ret; } -- cgit v0.10.2 From 35f7b961054021fd89b73a15988f10d38da71beb Mon Sep 17 00:00:00 2001 From: omar ramirez Date: Mon, 18 Apr 2011 16:39:42 +0000 Subject: OMAP3/4: l3: minor cleanup for parenthesis and extra spaces Removing extra lines, spaces and unneeded parenthesis. Collapsing an if statement to detect the type of error. l3_smx: - Fixing the message printed on error. So now: looks like: "No Error Error seen..." "No Error seen..." "In-Band Error Error seen..." "In-Band Error seen..." Other messages are self explanatory, no "Error" added to them. (E.g.: "Address Hole seen...") Signed-off-by: Omar Ramirez Luna Acked-by: Santosh Shilimkar Signed-off-by: Tony Lindgren diff --git a/arch/arm/mach-omap2/omap_l3_noc.c b/arch/arm/mach-omap2/omap_l3_noc.c index def3de8..7b9f190 100644 --- a/arch/arm/mach-omap2/omap_l3_noc.c +++ b/arch/arm/mach-omap2/omap_l3_noc.c @@ -63,10 +63,7 @@ static irqreturn_t l3_interrupt_handler(int irq, void *_l3) char *source_name; /* Get the Type of interrupt */ - if (irq == l3->app_irq) - inttype = L3_APPLICATION_ERROR; - else - inttype = L3_DEBUG_ERROR; + inttype = irq == l3->app_irq ? L3_APPLICATION_ERROR : L3_DEBUG_ERROR; for (i = 0; i < L3_MODULES; i++) { /* @@ -84,10 +81,10 @@ static irqreturn_t l3_interrupt_handler(int irq, void *_l3) err_src = j; /* Read the stderrlog_main_source from clk domain */ - std_err_main_addr = base + (*(l3_targ[i] + err_src)); - std_err_main = readl(std_err_main_addr); + std_err_main_addr = base + *(l3_targ[i] + err_src); + std_err_main = readl(std_err_main_addr); - switch ((std_err_main & CUSTOM_ERROR)) { + switch (std_err_main & CUSTOM_ERROR) { case STANDARD_ERROR: source_name = l3_targ_stderrlog_main_name[i][err_src]; @@ -143,7 +140,7 @@ static int __init omap4_l3_probe(struct platform_device *pdev) } l3->l3_base[0] = ioremap(res->start, resource_size(res)); - if (!(l3->l3_base[0])) { + if (!l3->l3_base[0]) { dev_err(&pdev->dev, "ioremap failed\n"); ret = -ENOMEM; goto err0; @@ -157,7 +154,7 @@ static int __init omap4_l3_probe(struct platform_device *pdev) } l3->l3_base[1] = ioremap(res->start, resource_size(res)); - if (!(l3->l3_base[1])) { + if (!l3->l3_base[1]) { dev_err(&pdev->dev, "ioremap failed\n"); ret = -ENOMEM; goto err1; @@ -171,7 +168,7 @@ static int __init omap4_l3_probe(struct platform_device *pdev) } l3->l3_base[2] = ioremap(res->start, resource_size(res)); - if (!(l3->l3_base[2])) { + if (!l3->l3_base[2]) { dev_err(&pdev->dev, "ioremap failed\n"); ret = -ENOMEM; goto err2; diff --git a/arch/arm/mach-omap2/omap_l3_smx.c b/arch/arm/mach-omap2/omap_l3_smx.c index 45aaa5c..6a7d87b 100644 --- a/arch/arm/mach-omap2/omap_l3_smx.c +++ b/arch/arm/mach-omap2/omap_l3_smx.c @@ -155,7 +155,7 @@ static irqreturn_t omap3_l3_block_irq(struct omap3_l3 *l3, u8 multi = error & L3_ERROR_LOG_MULTI; u32 address = omap3_l3_decode_addr(error_addr); - WARN(true, "%s Error seen by %s %s at address %x\n", + WARN(true, "%s seen by %s %s at address %x\n", omap3_l3_code_string(code), omap3_l3_initiator_string(initid), multi ? "Multiple Errors" : "", @@ -167,21 +167,15 @@ static irqreturn_t omap3_l3_block_irq(struct omap3_l3 *l3, static irqreturn_t omap3_l3_app_irq(int irq, void *_l3) { struct omap3_l3 *l3 = _l3; - u64 status, clear; u64 error; u64 error_addr; u64 err_source = 0; void __iomem *base; int int_type; - irqreturn_t ret = IRQ_NONE; - if (irq == l3->app_irq) - int_type = L3_APPLICATION_ERROR; - else - int_type = L3_DEBUG_ERROR; - + int_type = irq == l3->app_irq ? L3_APPLICATION_ERROR : L3_DEBUG_ERROR; if (!int_type) { status = omap3_l3_readll(l3->rt, L3_SI_FLAG_STATUS_0); /* @@ -202,7 +196,6 @@ static irqreturn_t omap3_l3_app_irq(int irq, void *_l3) for (err_source = 0; !(status & (1 << err_source)); err_source++) ; error = omap3_l3_readll(base, L3_ERROR_LOG); - if (error) { error_addr = omap3_l3_readll(base, L3_ERROR_LOG_ADDR); @@ -210,9 +203,8 @@ static irqreturn_t omap3_l3_app_irq(int irq, void *_l3) } /* Clear the status register */ - clear = ((L3_AGENT_STATUS_CLEAR_IA << int_type) | - (L3_AGENT_STATUS_CLEAR_TA)); - + clear = (L3_AGENT_STATUS_CLEAR_IA << int_type) | + L3_AGENT_STATUS_CLEAR_TA; omap3_l3_writell(base, L3_AGENT_STATUS, clear); /* clear the error log register */ @@ -240,7 +232,7 @@ static int __init omap3_l3_probe(struct platform_device *pdev) goto err0; } l3->rt = ioremap(res->start, resource_size(res)); - if (!(l3->rt)) { + if (!l3->rt) { dev_err(&pdev->dev, "ioremap failed\n"); ret = -ENOMEM; goto err0; @@ -259,7 +251,6 @@ static int __init omap3_l3_probe(struct platform_device *pdev) ret = request_irq(l3->app_irq, omap3_l3_app_irq, IRQF_DISABLED | IRQF_TRIGGER_RISING, "l3-app-irq", l3); - if (ret) { dev_err(&pdev->dev, "couldn't request app irq\n"); goto err2; -- cgit v0.10.2 From e15d13f45ec5dd0217317eddacd4e92565b300a1 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Wed, 20 Apr 2011 23:37:06 -0700 Subject: omap: Run make savedefconfig on omap2plus_defconfig to shrink it After commit ffb63e3 (omap2/3/4: Select all omaps and boards by default) many explicit settings can be dropped from the defconfig. This shrinks it down a bit more and makes it easier to patch later on. Signed-off-by: Tony Lindgren diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig index 076db52..d5f00d7 100644 --- a/arch/arm/configs/omap2plus_defconfig +++ b/arch/arm/configs/omap2plus_defconfig @@ -21,58 +21,22 @@ CONFIG_MODVERSIONS=y CONFIG_MODULE_SRCVERSION_ALL=y # CONFIG_BLK_DEV_BSG is not set CONFIG_ARCH_OMAP=y -CONFIG_ARCH_OMAP2=y -CONFIG_ARCH_OMAP3=y -CONFIG_ARCH_OMAP4=y CONFIG_OMAP_RESET_CLOCKS=y CONFIG_OMAP_MUX_DEBUG=y -CONFIG_OMAP_32K_TIMER=y -CONFIG_MACH_OMAP_GENERIC=y -CONFIG_ARCH_OMAP2420=y -CONFIG_ARCH_OMAP2430=y -CONFIG_ARCH_OMAP3430=y -CONFIG_MACH_OMAP_H4=y -CONFIG_MACH_OMAP_APOLLON=y -CONFIG_MACH_OMAP_2430SDP=y -CONFIG_MACH_OMAP3_BEAGLE=y -CONFIG_MACH_DEVKIT8000=y -CONFIG_MACH_OMAP_LDP=y -CONFIG_MACH_OVERO=y -CONFIG_MACH_OMAP3EVM=y -CONFIG_MACH_OMAP3517EVM=y -CONFIG_MACH_OMAP3_PANDORA=y -CONFIG_MACH_OMAP3_TOUCHBOOK=y -CONFIG_MACH_OMAP_3430SDP=y -CONFIG_MACH_NOKIA_N8X0=y -CONFIG_MACH_NOKIA_RX51=y -CONFIG_MACH_OMAP_ZOOM2=y -CONFIG_MACH_OMAP_ZOOM3=y -CONFIG_MACH_CM_T35=y -CONFIG_MACH_IGEP0020=y -CONFIG_MACH_SBC3530=y -CONFIG_MACH_OMAP_3630SDP=y -CONFIG_MACH_OMAP_4430SDP=y CONFIG_ARM_THUMBEE=y -CONFIG_ARM_L1_CACHE_SHIFT=5 CONFIG_ARM_ERRATA_411920=y CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y CONFIG_SMP=y CONFIG_NR_CPUS=2 -# CONFIG_LOCAL_TIMERS is not set -CONFIG_AEABI=y CONFIG_LEDS=y CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 CONFIG_CMDLINE="root=/dev/mmcblk0p2 rootwait console=ttyO2,115200" CONFIG_KEXEC=y CONFIG_FPE_NWFPE=y -CONFIG_VFP=y -CONFIG_NEON=y CONFIG_BINFMT_MISC=y -CONFIG_PM=y CONFIG_PM_DEBUG=y -CONFIG_PM_RUNTIME=y CONFIG_NET=y CONFIG_PACKET=y CONFIG_UNIX=y @@ -89,14 +53,6 @@ CONFIG_IP_PNP_RARP=y # CONFIG_IPV6 is not set CONFIG_NETFILTER=y CONFIG_BT=m -CONFIG_BT_L2CAP=m -CONFIG_BT_SCO=m -CONFIG_BT_RFCOMM=y -CONFIG_BT_RFCOMM_TTY=y -CONFIG_BT_BNEP=m -CONFIG_BT_BNEP_MC_FILTER=y -CONFIG_BT_BNEP_PROTO_FILTER=y -CONFIG_BT_HIDP=m CONFIG_BT_HCIUART=m CONFIG_BT_HCIUART_H4=y CONFIG_BT_HCIUART_BCSP=y @@ -107,11 +63,9 @@ CONFIG_CFG80211=m CONFIG_MAC80211=m CONFIG_MAC80211_RC_PID=y CONFIG_MAC80211_RC_DEFAULT_PID=y -CONFIG_MAC80211_LEDS=y CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_CONNECTOR=y CONFIG_MTD=y -CONFIG_MTD_CONCAT=y CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_CHAR=y CONFIG_MTD_BLOCK=y @@ -127,7 +81,6 @@ CONFIG_MTD_UBI=y CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_SIZE=16384 -CONFIG_EEPROM_LEGACY=y CONFIG_SCSI=y CONFIG_BLK_DEV_SD=y CONFIG_SCSI_MULTI_LUN=y @@ -158,19 +111,15 @@ CONFIG_TOUCHSCREEN_ADS7846=y CONFIG_INPUT_MISC=y CONFIG_INPUT_TWL4030_PWRBUTTON=y CONFIG_VT_HW_CONSOLE_BINDING=y -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y +# CONFIG_LEGACY_PTYS is not set CONFIG_SERIAL_8250_NR_UARTS=32 CONFIG_SERIAL_8250_EXTENDED=y CONFIG_SERIAL_8250_MANY_PORTS=y CONFIG_SERIAL_8250_SHARE_IRQ=y CONFIG_SERIAL_8250_DETECT_IRQ=y CONFIG_SERIAL_8250_RSA=y -# CONFIG_LEGACY_PTYS is not set CONFIG_HW_RANDOM=y -CONFIG_I2C=y CONFIG_I2C_CHARDEV=y -CONFIG_I2C_OMAP=y CONFIG_SPI=y CONFIG_SPI_OMAP24XX=y CONFIG_DEBUG_GPIO=y @@ -181,10 +130,6 @@ CONFIG_POWER_SUPPLY=y CONFIG_WATCHDOG=y CONFIG_OMAP_WATCHDOG=y CONFIG_TWL4030_WATCHDOG=y -CONFIG_MENELAUS=y -CONFIG_TWL4030_CORE=y -CONFIG_TWL4030_POWER=y -CONFIG_REGULATOR=y CONFIG_REGULATOR_TWL4030=y CONFIG_REGULATOR_TPS65023=y CONFIG_REGULATOR_TPS6507X=y @@ -208,7 +153,6 @@ CONFIG_BACKLIGHT_LCD_SUPPORT=y CONFIG_LCD_CLASS_DEVICE=y CONFIG_LCD_PLATFORM=y CONFIG_DISPLAY_SUPPORT=y -# CONFIG_VGA_CONSOLE is not set CONFIG_FRAMEBUFFER_CONSOLE=y CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y CONFIG_FONTS=y @@ -217,25 +161,20 @@ CONFIG_FONT_8x16=y CONFIG_LOGO=y CONFIG_SOUND=m CONFIG_SND=m -CONFIG_SND_MIXER_OSS=y -CONFIG_SND_PCM_OSS=y +CONFIG_SND_MIXER_OSS=m +CONFIG_SND_PCM_OSS=m CONFIG_SND_VERBOSE_PRINTK=y CONFIG_SND_DEBUG=y -CONFIG_SND_USB_AUDIO=y -CONFIG_SND_SOC=y -CONFIG_SND_OMAP_SOC=y -CONFIG_SND_OMAP_SOC_OMAP3_PANDORA=y +CONFIG_SND_USB_AUDIO=m +CONFIG_SND_SOC=m +CONFIG_SND_OMAP_SOC=m +CONFIG_SND_OMAP_SOC_OMAP3_PANDORA=m CONFIG_USB=y CONFIG_USB_DEBUG=y CONFIG_USB_ANNOUNCE_NEW_DEVICES=y CONFIG_USB_DEVICEFS=y CONFIG_USB_SUSPEND=y -# CONFIG_USB_OTG_WHITELIST is not set CONFIG_USB_MON=y -# CONFIG_USB_MUSB_HDRC is not set -# CONFIG_USB_MUSB_OTG is not set -# CONFIG_USB_GADGET_MUSB_HDRC is not set -CONFIG_USB_MUSB_DEBUG=y CONFIG_USB_WDM=y CONFIG_USB_STORAGE=y CONFIG_USB_LIBUSUAL=y @@ -250,18 +189,12 @@ CONFIG_MMC_UNSAFE_RESUME=y CONFIG_SDIO_UART=y CONFIG_MMC_OMAP=y CONFIG_MMC_OMAP_HS=y -CONFIG_LEDS_CLASS=y -CONFIG_LEDS_GPIO=y -CONFIG_LEDS_TRIGGER_TIMER=y -CONFIG_LEDS_TRIGGER_HEARTBEAT=y -CONFIG_LEDS_TRIGGER_DEFAULT_ON=y CONFIG_RTC_CLASS=y CONFIG_RTC_DRV_TWL92330=y CONFIG_RTC_DRV_TWL4030=y CONFIG_EXT2_FS=y CONFIG_EXT3_FS=y # CONFIG_EXT3_FS_XATTR is not set -CONFIG_INOTIFY=y CONFIG_QUOTA=y CONFIG_QFMT_V2=y CONFIG_MSDOS_FS=y @@ -285,12 +218,10 @@ CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_ISO8859_1=y CONFIG_PRINTK_TIME=y CONFIG_MAGIC_SYSRQ=y -CONFIG_DEBUG_FS=y CONFIG_DEBUG_KERNEL=y CONFIG_SCHEDSTATS=y CONFIG_TIMER_STATS=y CONFIG_PROVE_LOCKING=y -# CONFIG_LOCK_STAT is not set CONFIG_DEBUG_SPINLOCK_SLEEP=y # CONFIG_DEBUG_BUGVERBOSE is not set CONFIG_DEBUG_INFO=y -- cgit v0.10.2 From 0bf6e2eca2a32fc6ea69eb499313234476a526d7 Mon Sep 17 00:00:00 2001 From: Aaro Koskinen Date: Tue, 26 Apr 2011 02:25:10 -0700 Subject: OMAP3+: smartreflex: fix sr_late_init() error path in probe sr_late_init() will take care of freeing the resources. Signed-off-by: Aaro Koskinen Signed-off-by: Kevin Hilman diff --git a/arch/arm/mach-omap2/smartreflex.c b/arch/arm/mach-omap2/smartreflex.c index 13e24f9..dbc4b6f 100644 --- a/arch/arm/mach-omap2/smartreflex.c +++ b/arch/arm/mach-omap2/smartreflex.c @@ -883,7 +883,7 @@ static int __init omap_sr_probe(struct platform_device *pdev) ret = sr_late_init(sr_info); if (ret) { pr_warning("%s: Error in SR late init\n", __func__); - goto err_release_region; + return ret; } } -- cgit v0.10.2 From da9e7392f4b0c295a47ec7def38629959eb51ff2 Mon Sep 17 00:00:00 2001 From: Aaro Koskinen Date: Tue, 26 Apr 2011 02:25:16 -0700 Subject: OMAP3+: smartreflex: request the memory region We are releasing the memory region, but never actually request it. Signed-off-by: Aaro Koskinen Signed-off-by: Kevin Hilman diff --git a/arch/arm/mach-omap2/smartreflex.c b/arch/arm/mach-omap2/smartreflex.c index dbc4b6f..703143a 100644 --- a/arch/arm/mach-omap2/smartreflex.c +++ b/arch/arm/mach-omap2/smartreflex.c @@ -847,6 +847,14 @@ static int __init omap_sr_probe(struct platform_device *pdev) goto err_free_devinfo; } + mem = request_mem_region(mem->start, resource_size(mem), + dev_name(&pdev->dev)); + if (!mem) { + dev_err(&pdev->dev, "%s: no mem region\n", __func__); + ret = -EBUSY; + goto err_free_devinfo; + } + irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0); pm_runtime_enable(&pdev->dev); -- cgit v0.10.2 From 0c49cc167c6365a1a514b1e44d7fa8378ff16c4c Mon Sep 17 00:00:00 2001 From: Aaro Koskinen Date: Tue, 26 Apr 2011 02:25:21 -0700 Subject: OMAP3+: smartreflex: fix ioremap leak on probe error Add missing iounmap() to error paths. Signed-off-by: Aaro Koskinen Signed-off-by: Kevin Hilman diff --git a/arch/arm/mach-omap2/smartreflex.c b/arch/arm/mach-omap2/smartreflex.c index 703143a..156807e 100644 --- a/arch/arm/mach-omap2/smartreflex.c +++ b/arch/arm/mach-omap2/smartreflex.c @@ -904,7 +904,7 @@ static int __init omap_sr_probe(struct platform_device *pdev) vdd_dbg_dir = omap_voltage_get_dbgdir(sr_info->voltdm); if (!vdd_dbg_dir) { ret = -EINVAL; - goto err_release_region; + goto err_iounmap; } sr_info->dbg_dir = debugfs_create_dir("smartreflex", vdd_dbg_dir); @@ -912,7 +912,7 @@ static int __init omap_sr_probe(struct platform_device *pdev) dev_err(&pdev->dev, "%s: Unable to create debugfs directory\n", __func__); ret = PTR_ERR(sr_info->dbg_dir); - goto err_release_region; + goto err_iounmap; } (void) debugfs_create_file("autocomp", S_IRUGO | S_IWUSR, @@ -929,7 +929,7 @@ static int __init omap_sr_probe(struct platform_device *pdev) dev_err(&pdev->dev, "%s: Unable to create debugfs directory" "for n-values\n", __func__); ret = PTR_ERR(nvalue_dir); - goto err_release_region; + goto err_iounmap; } omap_voltage_get_volttable(sr_info->voltdm, &volt_data); @@ -939,7 +939,7 @@ static int __init omap_sr_probe(struct platform_device *pdev) "entries for n-values\n", __func__, sr_info->voltdm->name); ret = -ENODATA; - goto err_release_region; + goto err_iounmap; } for (i = 0; i < sr_info->nvalue_count; i++) { @@ -953,6 +953,8 @@ static int __init omap_sr_probe(struct platform_device *pdev) return ret; +err_iounmap: + iounmap(sr_info->base); err_release_region: release_mem_region(mem->start, resource_size(mem)); err_free_devinfo: -- cgit v0.10.2 From 833d78fc58774738a6fe7175794b9a9b251afa88 Mon Sep 17 00:00:00 2001 From: Aaro Koskinen Date: Tue, 26 Apr 2011 02:25:27 -0700 Subject: OMAP3+: smartreflex: delete instance from sr_list on probe error If the probe fails, the node should be deleted from sr_list. Signed-off-by: Aaro Koskinen Signed-off-by: Kevin Hilman diff --git a/arch/arm/mach-omap2/smartreflex.c b/arch/arm/mach-omap2/smartreflex.c index 156807e..f0a488a 100644 --- a/arch/arm/mach-omap2/smartreflex.c +++ b/arch/arm/mach-omap2/smartreflex.c @@ -954,6 +954,7 @@ static int __init omap_sr_probe(struct platform_device *pdev) return ret; err_iounmap: + list_del(&sr_info->node); iounmap(sr_info->base); err_release_region: release_mem_region(mem->start, resource_size(mem)); -- cgit v0.10.2 From 283a1c1f276d879ab8bafec8ec9f8fca03f159bb Mon Sep 17 00:00:00 2001 From: Aaro Koskinen Date: Tue, 26 Apr 2011 02:25:32 -0700 Subject: OMAP3+: smartreflex: delete debugfs entries on probe error Delete created debugfs entries if probe fails. Signed-off-by: Aaro Koskinen Signed-off-by: Kevin Hilman diff --git a/arch/arm/mach-omap2/smartreflex.c b/arch/arm/mach-omap2/smartreflex.c index f0a488a..fb7dc52 100644 --- a/arch/arm/mach-omap2/smartreflex.c +++ b/arch/arm/mach-omap2/smartreflex.c @@ -929,7 +929,7 @@ static int __init omap_sr_probe(struct platform_device *pdev) dev_err(&pdev->dev, "%s: Unable to create debugfs directory" "for n-values\n", __func__); ret = PTR_ERR(nvalue_dir); - goto err_iounmap; + goto err_debugfs; } omap_voltage_get_volttable(sr_info->voltdm, &volt_data); @@ -939,7 +939,7 @@ static int __init omap_sr_probe(struct platform_device *pdev) "entries for n-values\n", __func__, sr_info->voltdm->name); ret = -ENODATA; - goto err_iounmap; + goto err_debugfs; } for (i = 0; i < sr_info->nvalue_count; i++) { @@ -953,6 +953,8 @@ static int __init omap_sr_probe(struct platform_device *pdev) return ret; +err_debugfs: + debugfs_remove_recursive(sr_info->dbg_dir); err_iounmap: list_del(&sr_info->node); iounmap(sr_info->base); -- cgit v0.10.2 From 34549009a1a48e9212508aa32a90281e682c52b1 Mon Sep 17 00:00:00 2001 From: Nishanth Menon Date: Wed, 27 Apr 2011 06:13:05 -0700 Subject: OMAP4: PM: remove redundant #ifdef CONFIG_PM pm44xx.c is built only when CONFIG_PM is setup, remove redundant CONFIG_PM check. This also fixes: https://bugzilla.kernel.org/show_bug.cgi?id=25022 Reported-by: Martin Etti Signed-off-by: Nishanth Menon Signed-off-by: Kevin Hilman Signed-off-by: Tony Lindgren diff --git a/arch/arm/mach-omap2/pm44xx.c b/arch/arm/mach-omap2/pm44xx.c index 76cfff2..59a870b 100644 --- a/arch/arm/mach-omap2/pm44xx.c +++ b/arch/arm/mach-omap2/pm44xx.c @@ -105,13 +105,11 @@ static int __init omap4_pm_init(void) pr_err("Power Management for TI OMAP4.\n"); -#ifdef CONFIG_PM ret = pwrdm_for_each(pwrdms_setup, NULL); if (ret) { pr_err("Failed to setup powerdomains\n"); goto err2; } -#endif #ifdef CONFIG_SUSPEND suspend_set_ops(&omap_pm_ops); -- cgit v0.10.2 From d14f81741f4ca5c96f52eff0210c8da0b0997d6f Mon Sep 17 00:00:00 2001 From: Nishanth Menon Date: Wed, 27 Apr 2011 06:13:46 -0700 Subject: OMAP3+: voltage: remove spurious pr_notice for debugfs cat of debugfs entry for vp_volt provides voltage. The additional pr_notice is just spam on console and provides no additional information. Signed-off-by: Nishanth Menon Signed-off-by: Kevin Hilman Signed-off-by: Tony Lindgren diff --git a/arch/arm/mach-omap2/voltage.c b/arch/arm/mach-omap2/voltage.c index 6fb5209..b74bfb8 100644 --- a/arch/arm/mach-omap2/voltage.c +++ b/arch/arm/mach-omap2/voltage.c @@ -149,7 +149,6 @@ static int vp_volt_debug_get(void *data, u64 *val) } vsel = vdd->read_reg(prm_mod_offs, vdd->vp_data->voltage); - pr_notice("curr_vsel = %x\n", vsel); if (!vdd->pmic_info->vsel_to_uv) { pr_warning("PMIC function to convert vsel to voltage" -- cgit v0.10.2 From 96974a249b0cf3537f49115a59be67e2c54f315c Mon Sep 17 00:00:00 2001 From: Mike Rapoport Date: Mon, 25 Apr 2011 01:09:05 +0300 Subject: omap: consolidate touch screen initialization among different boards Add common-board-devices.c that will contain the code for peripheral devices initializatoin shared between multiple boards. Start small with touchscreen initialization. Signed-off-by: Mike Rapoport Signed-off-by: Tony Lindgren diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile index a45cd64..a0c2cae 100644 --- a/arch/arm/mach-omap2/Makefile +++ b/arch/arm/mach-omap2/Makefile @@ -270,3 +270,5 @@ obj-$(CONFIG_ARCH_OMAP4) += hwspinlock.o disp-$(CONFIG_OMAP2_DSS) := display.o obj-y += $(disp-m) $(disp-y) + +obj-y += common-board-devices.o diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c index 9afd087..3726465 100644 --- a/arch/arm/mach-omap2/board-3430sdp.c +++ b/arch/arm/mach-omap2/board-3430sdp.c @@ -19,7 +19,6 @@ #include #include #include -#include #include #include #include @@ -48,6 +47,7 @@ #include "hsmmc.h" #include "pm.h" #include "control.h" +#include "common-board-devices.h" #define CONFIG_DISABLE_HFCLK 1 @@ -123,58 +123,6 @@ static struct twl4030_keypad_data sdp3430_kp_data = { .rep = 1, }; -static int ts_gpio; /* Needed for ads7846_get_pendown_state */ - -/** - * @brief ads7846_dev_init : Requests & sets GPIO line for pen-irq - * - * @return - void. If request gpio fails then Flag KERN_ERR. - */ -static void ads7846_dev_init(void) -{ - if (gpio_request(ts_gpio, "ADS7846 pendown") < 0) { - printk(KERN_ERR "can't get ads746 pen down GPIO\n"); - return; - } - - gpio_direction_input(ts_gpio); - gpio_set_debounce(ts_gpio, 310); -} - -static int ads7846_get_pendown_state(void) -{ - return !gpio_get_value(ts_gpio); -} - -static struct ads7846_platform_data tsc2046_config __initdata = { - .get_pendown_state = ads7846_get_pendown_state, - .keep_vref_on = 1, - .wakeup = true, -}; - - -static struct omap2_mcspi_device_config tsc2046_mcspi_config = { - .turbo_mode = 0, - .single_channel = 1, /* 0: slave, 1: master */ -}; - -static struct spi_board_info sdp3430_spi_board_info[] __initdata = { - [0] = { - /* - * TSC2046 operates at a max freqency of 2MHz, so - * operate slightly below at 1.5MHz - */ - .modalias = "ads7846", - .bus_num = 1, - .chip_select = 0, - .max_speed_hz = 1500000, - .controller_data = &tsc2046_mcspi_config, - .irq = 0, - .platform_data = &tsc2046_config, - }, -}; - - #define SDP3430_LCD_PANEL_BACKLIGHT_GPIO 8 #define SDP3430_LCD_PANEL_ENABLE_GPIO 5 @@ -880,6 +828,8 @@ static struct omap_musb_board_data musb_board_data = { static void __init omap_3430sdp_init(void) { + int gpio_pendown; + omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); omap_board_config = sdp3430_config; omap_board_config_size = ARRAY_SIZE(sdp3430_config); @@ -887,13 +837,10 @@ static void __init omap_3430sdp_init(void) omap3430_i2c_init(); omap_display_init(&sdp3430_dss_data); if (omap_rev() > OMAP3430_REV_ES1_0) - ts_gpio = SDP3430_TS_GPIO_IRQ_SDPV2; + gpio_pendown = SDP3430_TS_GPIO_IRQ_SDPV2; else - ts_gpio = SDP3430_TS_GPIO_IRQ_SDPV1; - sdp3430_spi_board_info[0].irq = gpio_to_irq(ts_gpio); - spi_register_board_info(sdp3430_spi_board_info, - ARRAY_SIZE(sdp3430_spi_board_info)); - ads7846_dev_init(); + gpio_pendown = SDP3430_TS_GPIO_IRQ_SDPV1; + omap_ads7846_init(1, gpio_pendown, 310, NULL); board_serial_init(); usb_musb_init(&musb_board_data); board_smc91x_init(); diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c index 7c70f56..4af5cf9 100644 --- a/arch/arm/mach-omap2/board-cm-t35.c +++ b/arch/arm/mach-omap2/board-cm-t35.c @@ -54,6 +54,7 @@ #include "mux.h" #include "sdram-micron-mt46h32m32lf-6.h" #include "hsmmc.h" +#include "common-board-devices.h" #define CM_T35_GPIO_PENDOWN 57 @@ -177,61 +178,6 @@ static void __init cm_t35_init_nand(void) static inline void cm_t35_init_nand(void) {} #endif -#if defined(CONFIG_TOUCHSCREEN_ADS7846) || \ - defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE) -#include - -static struct omap2_mcspi_device_config ads7846_mcspi_config = { - .turbo_mode = 0, - .single_channel = 1, /* 0: slave, 1: master */ -}; - -static int ads7846_get_pendown_state(void) -{ - return !gpio_get_value(CM_T35_GPIO_PENDOWN); -} - -static struct ads7846_platform_data ads7846_config = { - .x_max = 0x0fff, - .y_max = 0x0fff, - .x_plate_ohms = 180, - .pressure_max = 255, - .debounce_max = 10, - .debounce_tol = 3, - .debounce_rep = 1, - .get_pendown_state = ads7846_get_pendown_state, - .keep_vref_on = 1, -}; - -static struct spi_board_info cm_t35_spi_board_info[] __initdata = { - { - .modalias = "ads7846", - .bus_num = 1, - .chip_select = 0, - .max_speed_hz = 1500000, - .controller_data = &ads7846_mcspi_config, - .irq = OMAP_GPIO_IRQ(CM_T35_GPIO_PENDOWN), - .platform_data = &ads7846_config, - }, -}; - -static void __init cm_t35_init_ads7846(void) -{ - if ((gpio_request(CM_T35_GPIO_PENDOWN, "ADS7846_PENDOWN") == 0) && - (gpio_direction_input(CM_T35_GPIO_PENDOWN) == 0)) { - gpio_export(CM_T35_GPIO_PENDOWN, 0); - } else { - pr_err("CM-T35: could not obtain gpio for ADS7846_PENDOWN\n"); - return; - } - - spi_register_board_info(cm_t35_spi_board_info, - ARRAY_SIZE(cm_t35_spi_board_info)); -} -#else -static inline void cm_t35_init_ads7846(void) {} -#endif - #define CM_T35_LCD_EN_GPIO 157 #define CM_T35_LCD_BL_GPIO 58 #define CM_T35_DVI_EN_GPIO 54 @@ -734,7 +680,7 @@ static void __init cm_t35_init(void) omap_serial_init(); cm_t35_init_i2c(); cm_t35_init_nand(); - cm_t35_init_ads7846(); + omap_ads7846_init(1, CM_T35_GPIO_PENDOWN, 0, NULL); cm_t35_init_ethernet(); cm_t35_init_led(); cm_t35_init_display(); diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c index 65f9fde..9f8338d 100644 --- a/arch/arm/mach-omap2/board-devkit8000.c +++ b/arch/arm/mach-omap2/board-devkit8000.c @@ -51,7 +51,6 @@ #include #include #include -#include #include #include @@ -60,6 +59,7 @@ #include "mux.h" #include "hsmmc.h" #include "timer-gp.h" +#include "common-board-devices.h" #define NAND_BLOCK_SIZE SZ_128K @@ -463,56 +463,6 @@ static void __init devkit8000_init_irq(void) #endif } -static void __init devkit8000_ads7846_init(void) -{ - int gpio = OMAP3_DEVKIT_TS_GPIO; - int ret; - - ret = gpio_request(gpio, "ads7846_pen_down"); - if (ret < 0) { - printk(KERN_ERR "Failed to request GPIO %d for " - "ads7846 pen down IRQ\n", gpio); - return; - } - - gpio_direction_input(gpio); -} - -static int ads7846_get_pendown_state(void) -{ - return !gpio_get_value(OMAP3_DEVKIT_TS_GPIO); -} - -static struct ads7846_platform_data ads7846_config = { - .x_max = 0x0fff, - .y_max = 0x0fff, - .x_plate_ohms = 180, - .pressure_max = 255, - .debounce_max = 10, - .debounce_tol = 5, - .debounce_rep = 1, - .get_pendown_state = ads7846_get_pendown_state, - .keep_vref_on = 1, - .settle_delay_usecs = 150, -}; - -static struct omap2_mcspi_device_config ads7846_mcspi_config = { - .turbo_mode = 0, - .single_channel = 1, /* 0: slave, 1: master */ -}; - -static struct spi_board_info devkit8000_spi_board_info[] __initdata = { - { - .modalias = "ads7846", - .bus_num = 2, - .chip_select = 0, - .max_speed_hz = 1500000, - .controller_data = &ads7846_mcspi_config, - .irq = OMAP_GPIO_IRQ(OMAP3_DEVKIT_TS_GPIO), - .platform_data = &ads7846_config, - } -}; - #define OMAP_DM9000_BASE 0x2c000000 static struct resource omap_dm9000_resources[] = { @@ -795,10 +745,8 @@ static void __init devkit8000_init(void) ARRAY_SIZE(devkit8000_devices)); omap_display_init(&devkit8000_dss_data); - spi_register_board_info(devkit8000_spi_board_info, - ARRAY_SIZE(devkit8000_spi_board_info)); - devkit8000_ads7846_init(); + omap_ads7846_init(2, OMAP3_DEVKIT_TS_GPIO, 0, NULL); usb_musb_init(&musb_board_data); usbhs_init(&usbhs_bdata); diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c index ea9f049..155b423 100644 --- a/arch/arm/mach-omap2/board-ldp.c +++ b/arch/arm/mach-omap2/board-ldp.c @@ -22,7 +22,6 @@ #include #include #include -#include #include #include #include @@ -49,6 +48,7 @@ #include "mux.h" #include "hsmmc.h" #include "control.h" +#include "common-board-devices.h" #define LDP_SMSC911X_CS 1 #define LDP_SMSC911X_GPIO 152 @@ -168,55 +168,6 @@ static struct platform_device ldp_gpio_keys_device = { }, }; -static int ts_gpio; - -/** - * @brief ads7846_dev_init : Requests & sets GPIO line for pen-irq - * - * @return - void. If request gpio fails then Flag KERN_ERR. - */ -static void ads7846_dev_init(void) -{ - if (gpio_request(ts_gpio, "ads7846 irq") < 0) { - printk(KERN_ERR "can't get ads746 pen down GPIO\n"); - return; - } - - gpio_direction_input(ts_gpio); - gpio_set_debounce(ts_gpio, 310); -} - -static int ads7846_get_pendown_state(void) -{ - return !gpio_get_value(ts_gpio); -} - -static struct ads7846_platform_data tsc2046_config __initdata = { - .get_pendown_state = ads7846_get_pendown_state, - .keep_vref_on = 1, -}; - -static struct omap2_mcspi_device_config tsc2046_mcspi_config = { - .turbo_mode = 0, - .single_channel = 1, /* 0: slave, 1: master */ -}; - -static struct spi_board_info ldp_spi_board_info[] __initdata = { - [0] = { - /* - * TSC2046 operates at a max freqency of 2MHz, so - * operate slightly below at 1.5MHz - */ - .modalias = "ads7846", - .bus_num = 1, - .chip_select = 0, - .max_speed_hz = 1500000, - .controller_data = &tsc2046_mcspi_config, - .irq = 0, - .platform_data = &tsc2046_config, - }, -}; - static struct omap_smsc911x_platform_data smsc911x_cfg = { .cs = LDP_SMSC911X_CS, .gpio_irq = LDP_SMSC911X_GPIO, @@ -399,11 +350,7 @@ static void __init omap_ldp_init(void) ldp_init_smsc911x(); omap_i2c_init(); platform_add_devices(ldp_devices, ARRAY_SIZE(ldp_devices)); - ts_gpio = 54; - ldp_spi_board_info[0].irq = gpio_to_irq(ts_gpio); - spi_register_board_info(ldp_spi_board_info, - ARRAY_SIZE(ldp_spi_board_info)); - ads7846_dev_init(); + omap_ads7846_init(1, 54, 310, NULL); omap_serial_init(); usb_musb_init(&musb_board_data); board_nand_init(ldp_nand_partitions, diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c index 3fc85c6..376ea87 100644 --- a/arch/arm/mach-omap2/board-omap3evm.c +++ b/arch/arm/mach-omap2/board-omap3evm.c @@ -50,6 +50,7 @@ #include "mux.h" #include "sdram-micron-mt46h32m32lf-6.h" #include "hsmmc.h" +#include "common-board-devices.h" #define OMAP3_EVM_TS_GPIO 175 #define OMAP3_EVM_EHCI_VBUS 22 @@ -630,51 +631,6 @@ static int __init omap3_evm_i2c_init(void) return 0; } -static void ads7846_dev_init(void) -{ - if (gpio_request(OMAP3_EVM_TS_GPIO, "ADS7846 pendown") < 0) - printk(KERN_ERR "can't get ads7846 pen down GPIO\n"); - - gpio_direction_input(OMAP3_EVM_TS_GPIO); - gpio_set_debounce(OMAP3_EVM_TS_GPIO, 310); -} - -static int ads7846_get_pendown_state(void) -{ - return !gpio_get_value(OMAP3_EVM_TS_GPIO); -} - -static struct ads7846_platform_data ads7846_config = { - .x_max = 0x0fff, - .y_max = 0x0fff, - .x_plate_ohms = 180, - .pressure_max = 255, - .debounce_max = 10, - .debounce_tol = 3, - .debounce_rep = 1, - .get_pendown_state = ads7846_get_pendown_state, - .keep_vref_on = 1, - .settle_delay_usecs = 150, - .wakeup = true, -}; - -static struct omap2_mcspi_device_config ads7846_mcspi_config = { - .turbo_mode = 0, - .single_channel = 1, /* 0: slave, 1: master */ -}; - -static struct spi_board_info omap3evm_spi_board_info[] = { - [0] = { - .modalias = "ads7846", - .bus_num = 1, - .chip_select = 0, - .max_speed_hz = 1500000, - .controller_data = &ads7846_mcspi_config, - .irq = OMAP_GPIO_IRQ(OMAP3_EVM_TS_GPIO), - .platform_data = &ads7846_config, - }, -}; - static struct omap_board_config_kernel omap3_evm_config[] __initdata = { }; @@ -792,9 +748,6 @@ static void __init omap3_evm_init(void) omap_display_init(&omap3_evm_dss_data); - spi_register_board_info(omap3evm_spi_board_info, - ARRAY_SIZE(omap3evm_spi_board_info)); - omap_serial_init(); /* OMAP3EVM uses ISP1504 phy and so register nop transceiver */ @@ -827,7 +780,7 @@ static void __init omap3_evm_init(void) } usb_musb_init(&musb_board_data); usbhs_init(&usbhs_bdata); - ads7846_dev_init(); + omap_ads7846_init(1, OMAP3_EVM_TS_GPIO, 310, NULL); omap3evm_init_smsc911x(); omap3_evm_display_init(); diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c index 07dba88..517701a 100644 --- a/arch/arm/mach-omap2/board-omap3pandora.c +++ b/arch/arm/mach-omap2/board-omap3pandora.c @@ -22,7 +22,6 @@ #include #include -#include #include #include #include @@ -52,6 +51,7 @@ #include "mux.h" #include "sdram-micron-mt46h32m32lf-6.h" #include "hsmmc.h" +#include "common-board-devices.h" #define PANDORA_WIFI_IRQ_GPIO 21 #define PANDORA_WIFI_NRESET_GPIO 23 @@ -570,53 +570,8 @@ static int __init omap3pandora_i2c_init(void) return 0; } -static void __init omap3pandora_ads7846_init(void) -{ - int gpio = OMAP3_PANDORA_TS_GPIO; - int ret; - - ret = gpio_request(gpio, "ads7846_pen_down"); - if (ret < 0) { - printk(KERN_ERR "Failed to request GPIO %d for " - "ads7846 pen down IRQ\n", gpio); - return; - } - - gpio_direction_input(gpio); -} - -static int ads7846_get_pendown_state(void) -{ - return !gpio_get_value(OMAP3_PANDORA_TS_GPIO); -} - -static struct ads7846_platform_data ads7846_config = { - .x_max = 0x0fff, - .y_max = 0x0fff, - .x_plate_ohms = 180, - .pressure_max = 255, - .debounce_max = 10, - .debounce_tol = 3, - .debounce_rep = 1, - .get_pendown_state = ads7846_get_pendown_state, - .keep_vref_on = 1, -}; - -static struct omap2_mcspi_device_config ads7846_mcspi_config = { - .turbo_mode = 0, - .single_channel = 1, /* 0: slave, 1: master */ -}; - static struct spi_board_info omap3pandora_spi_board_info[] __initdata = { { - .modalias = "ads7846", - .bus_num = 1, - .chip_select = 0, - .max_speed_hz = 1500000, - .controller_data = &ads7846_mcspi_config, - .irq = OMAP_GPIO_IRQ(OMAP3_PANDORA_TS_GPIO), - .platform_data = &ads7846_config, - }, { .modalias = "tpo_td043mtea1_panel_spi", .bus_num = 1, .chip_select = 1, @@ -705,7 +660,7 @@ static void __init omap3pandora_init(void) omap_serial_init(); spi_register_board_info(omap3pandora_spi_board_info, ARRAY_SIZE(omap3pandora_spi_board_info)); - omap3pandora_ads7846_init(); + omap_ads7846_init(1, OMAP3_PANDORA_TS_GPIO, 0, NULL); usbhs_init(&usbhs_bdata); usb_musb_init(&musb_board_data); gpmc_nand_init(&pandora_nand_data); diff --git a/arch/arm/mach-omap2/board-omap3stalker.c b/arch/arm/mach-omap2/board-omap3stalker.c index 848016c..671ceb0 100644 --- a/arch/arm/mach-omap2/board-omap3stalker.c +++ b/arch/arm/mach-omap2/board-omap3stalker.c @@ -45,7 +45,6 @@ #include #include #include -#include #include #include #include @@ -54,6 +53,7 @@ #include "mux.h" #include "hsmmc.h" #include "timer-gp.h" +#include "common-board-devices.h" #if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE) #include @@ -498,49 +498,6 @@ static int __init omap3_stalker_i2c_init(void) } #define OMAP3_STALKER_TS_GPIO 175 -static void ads7846_dev_init(void) -{ - if (gpio_request(OMAP3_STALKER_TS_GPIO, "ADS7846 pendown") < 0) - printk(KERN_ERR "can't get ads7846 pen down GPIO\n"); - - gpio_direction_input(OMAP3_STALKER_TS_GPIO); - gpio_set_debounce(OMAP3_STALKER_TS_GPIO, 310); -} - -static int ads7846_get_pendown_state(void) -{ - return !gpio_get_value(OMAP3_STALKER_TS_GPIO); -} - -static struct ads7846_platform_data ads7846_config = { - .x_max = 0x0fff, - .y_max = 0x0fff, - .x_plate_ohms = 180, - .pressure_max = 255, - .debounce_max = 10, - .debounce_tol = 3, - .debounce_rep = 1, - .get_pendown_state = ads7846_get_pendown_state, - .keep_vref_on = 1, - .settle_delay_usecs = 150, -}; - -static struct omap2_mcspi_device_config ads7846_mcspi_config = { - .turbo_mode = 0, - .single_channel = 1, /* 0: slave, 1: master */ -}; - -static struct spi_board_info omap3stalker_spi_board_info[] = { - [0] = { - .modalias = "ads7846", - .bus_num = 1, - .chip_select = 0, - .max_speed_hz = 1500000, - .controller_data = &ads7846_mcspi_config, - .irq = OMAP_GPIO_IRQ(OMAP3_STALKER_TS_GPIO), - .platform_data = &ads7846_config, - }, -}; static struct omap_board_config_kernel omap3_stalker_config[] __initdata = { }; @@ -602,13 +559,11 @@ static void __init omap3_stalker_init(void) ARRAY_SIZE(omap3_stalker_devices)); omap_display_init(&omap3_stalker_dss_data); - spi_register_board_info(omap3stalker_spi_board_info, - ARRAY_SIZE(omap3stalker_spi_board_info)); omap_serial_init(); usb_musb_init(&musb_board_data); usbhs_init(&usbhs_bdata); - ads7846_dev_init(); + omap_ads7846_init(1, OMAP3_STALKER_TS_GPIO, 310, NULL); omap_mux_init_gpio(21, OMAP_PIN_OUTPUT); omap_mux_init_gpio(18, OMAP_PIN_INPUT_PULLUP); diff --git a/arch/arm/mach-omap2/board-omap3touchbook.c b/arch/arm/mach-omap2/board-omap3touchbook.c index 127cb17..15f9d7d 100644 --- a/arch/arm/mach-omap2/board-omap3touchbook.c +++ b/arch/arm/mach-omap2/board-omap3touchbook.c @@ -52,6 +52,7 @@ #include "mux.h" #include "hsmmc.h" #include "timer-gp.h" +#include "common-board-devices.h" #include @@ -301,19 +302,7 @@ static int __init omap3_touchbook_i2c_init(void) return 0; } -static void __init omap3_ads7846_init(void) -{ - if (gpio_request(OMAP3_TS_GPIO, "ads7846_pen_down")) { - printk(KERN_ERR "Failed to request GPIO %d for " - "ads7846 pen down IRQ\n", OMAP3_TS_GPIO); - return; - } - - gpio_direction_input(OMAP3_TS_GPIO); - gpio_set_debounce(OMAP3_TS_GPIO, 310); -} - -static struct ads7846_platform_data ads7846_config = { +static struct ads7846_platform_data ads7846_pdata = { .x_min = 100, .y_min = 265, .x_max = 3950, @@ -327,23 +316,6 @@ static struct ads7846_platform_data ads7846_config = { .keep_vref_on = 1, }; -static struct omap2_mcspi_device_config ads7846_mcspi_config = { - .turbo_mode = 0, - .single_channel = 1, /* 0: slave, 1: master */ -}; - -static struct spi_board_info omap3_ads7846_spi_board_info[] __initdata = { - { - .modalias = "ads7846", - .bus_num = 4, - .chip_select = 0, - .max_speed_hz = 1500000, - .controller_data = &ads7846_mcspi_config, - .irq = OMAP_GPIO_IRQ(OMAP3_TS_GPIO), - .platform_data = &ads7846_config, - } -}; - static struct gpio_led gpio_leds[] = { { .name = "touchbook::usr0", @@ -526,9 +498,7 @@ static void __init omap3_touchbook_init(void) gpio_direction_output(176, true); /* Touchscreen and accelerometer */ - spi_register_board_info(omap3_ads7846_spi_board_info, - ARRAY_SIZE(omap3_ads7846_spi_board_info)); - omap3_ads7846_init(); + omap_ads7846_init(4, OMAP3_TS_GPIO, 310, &ads7846_pdata); usb_musb_init(&musb_board_data); usbhs_init(&usbhs_bdata); omap3touchbook_flash_init(); diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c index 165e1fa..4a02f84 100644 --- a/arch/arm/mach-omap2/board-overo.c +++ b/arch/arm/mach-omap2/board-overo.c @@ -56,6 +56,7 @@ #include "mux.h" #include "sdram-micron-mt46h32m32lf-6.h" #include "hsmmc.h" +#include "common-board-devices.h" #define OVERO_GPIO_BT_XGATE 15 #define OVERO_GPIO_W2W_NRESET 16 @@ -74,30 +75,6 @@ #if defined(CONFIG_TOUCHSCREEN_ADS7846) || \ defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE) -#include - -static struct omap2_mcspi_device_config ads7846_mcspi_config = { - .turbo_mode = 0, - .single_channel = 1, /* 0: slave, 1: master */ -}; - -static int ads7846_get_pendown_state(void) -{ - return !gpio_get_value(OVERO_GPIO_PENDOWN); -} - -static struct ads7846_platform_data ads7846_config = { - .x_max = 0x0fff, - .y_max = 0x0fff, - .x_plate_ohms = 180, - .pressure_max = 255, - .debounce_max = 10, - .debounce_tol = 3, - .debounce_rep = 1, - .get_pendown_state = ads7846_get_pendown_state, - .keep_vref_on = 1, -}; - /* fixed regulator for ads7846 */ static struct regulator_consumer_supply ads7846_supply = REGULATOR_SUPPLY("vcc", "spi1.0"); @@ -128,14 +105,7 @@ static struct platform_device vads7846_device = { static void __init overo_ads7846_init(void) { - if ((gpio_request(OVERO_GPIO_PENDOWN, "ADS7846_PENDOWN") == 0) && - (gpio_direction_input(OVERO_GPIO_PENDOWN) == 0)) { - gpio_export(OVERO_GPIO_PENDOWN, 0); - } else { - printk(KERN_ERR "could not obtain gpio for ADS7846_PENDOWN\n"); - return; - } - + omap_ads7846_init(1, OVERO_GPIO_PENDOWN, 0, NULL); platform_device_register(&vads7846_device); } @@ -589,18 +559,6 @@ static int __init overo_i2c_init(void) } static struct spi_board_info overo_spi_board_info[] __initdata = { -#if defined(CONFIG_TOUCHSCREEN_ADS7846) || \ - defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE) - { - .modalias = "ads7846", - .bus_num = 1, - .chip_select = 0, - .max_speed_hz = 1500000, - .controller_data = &ads7846_mcspi_config, - .irq = OMAP_GPIO_IRQ(OVERO_GPIO_PENDOWN), - .platform_data = &ads7846_config, - }, -#endif #if defined(CONFIG_PANEL_LGPHILIPS_LB035Q02) || \ defined(CONFIG_PANEL_LGPHILIPS_LB035Q02_MODULE) { diff --git a/arch/arm/mach-omap2/common-board-devices.c b/arch/arm/mach-omap2/common-board-devices.c new file mode 100644 index 0000000..fad41ec --- /dev/null +++ b/arch/arm/mach-omap2/common-board-devices.c @@ -0,0 +1,85 @@ +/* + * common-board-devices.c + * + * Copyright (C) 2011 CompuLab, Ltd. + * Author: Mike Rapoport + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + * + */ + +#include +#include +#include + +#include + +#include "common-board-devices.h" + +static struct omap2_mcspi_device_config ads7846_mcspi_config = { + .turbo_mode = 0, + .single_channel = 1, /* 0: slave, 1: master */ +}; + +static struct ads7846_platform_data ads7846_config = { + .x_max = 0x0fff, + .y_max = 0x0fff, + .x_plate_ohms = 180, + .pressure_max = 255, + .debounce_max = 10, + .debounce_tol = 3, + .debounce_rep = 1, + .gpio_pendown = -EINVAL, + .keep_vref_on = 1, +}; + +static struct spi_board_info ads7846_spi_board_info __initdata = { + .modalias = "ads7846", + .bus_num = -EINVAL, + .chip_select = 0, + .max_speed_hz = 1500000, + .controller_data = &ads7846_mcspi_config, + .irq = -EINVAL, + .platform_data = &ads7846_config, +}; + +void __init omap_ads7846_init(int bus_num, int gpio_pendown, int gpio_debounce, + struct ads7846_platform_data *board_pdata) +{ + struct spi_board_info *spi_bi = &ads7846_spi_board_info; + int err; + + err = gpio_request(gpio_pendown, "TS PenDown"); + if (err) { + pr_err("Could not obtain gpio for TS PenDown: %d\n", err); + return; + } + + gpio_direction_input(gpio_pendown); + gpio_export(gpio_pendown, 0); + + if (gpio_debounce) + gpio_set_debounce(gpio_pendown, gpio_debounce); + + ads7846_config.gpio_pendown = gpio_pendown; + + spi_bi->bus_num = bus_num; + spi_bi->irq = OMAP_GPIO_IRQ(gpio_pendown); + + if (board_pdata) + spi_bi->platform_data = board_pdata; + + spi_register_board_info(&ads7846_spi_board_info, 1); +} diff --git a/arch/arm/mach-omap2/common-board-devices.h b/arch/arm/mach-omap2/common-board-devices.h new file mode 100644 index 0000000..75f9248d --- /dev/null +++ b/arch/arm/mach-omap2/common-board-devices.h @@ -0,0 +1,18 @@ +#ifndef __OMAP_COMMON_BOARD_DEVICES__ +#define __OMAP_COMMON_BOARD_DEVICES__ + +#if defined(CONFIG_TOUCHSCREEN_ADS7846) || \ + defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE) +struct ads7846_platform_data; + +void omap_ads7846_init(int bus_num, int gpio_pendown, int gpio_debounce, + struct ads7846_platform_data *board_pdata); +#else +static inline void omap_ads7846_init(int bus_num, + int gpio_pendown, int gpio_debounce, + struct ads7846_platform_data *board_data) +{ +} +#endif + +#endif /* __OMAP_COMMON_BOARD_DEVICES__ */ -- cgit v0.10.2 From fbd8071c188e3053fb318d78214e54d4615d93f2 Mon Sep 17 00:00:00 2001 From: Mike Rapoport Date: Mon, 25 Apr 2011 01:09:06 +0300 Subject: omap: use common initialization for PMIC i2c bus Introduce omap_pmic_init that registers i2c bus and PMIC device on that bus and add omap2/3/4 wrappers for common cases. Signed-off-by: Mike Rapoport Signed-off-by: Tony Lindgren diff --git a/arch/arm/mach-omap2/board-2430sdp.c b/arch/arm/mach-omap2/board-2430sdp.c index 1fa6bb8..99b3f2d 100644 --- a/arch/arm/mach-omap2/board-2430sdp.c +++ b/arch/arm/mach-omap2/board-2430sdp.c @@ -41,6 +41,7 @@ #include "mux.h" #include "hsmmc.h" +#include "common-board-devices.h" #define SDP2430_CS0_BASE 0x04000000 #define SECONDARY_LCD_GPIO 147 @@ -180,15 +181,6 @@ static struct twl4030_platform_data sdp2430_twldata = { .vmmc1 = &sdp2430_vmmc1, }; -static struct i2c_board_info __initdata sdp2430_i2c_boardinfo[] = { - { - I2C_BOARD_INFO("twl4030", 0x48), - .flags = I2C_CLIENT_WAKE, - .irq = INT_24XX_SYS_NIRQ, - .platform_data = &sdp2430_twldata, - }, -}; - static struct i2c_board_info __initdata sdp2430_i2c1_boardinfo[] = { { I2C_BOARD_INFO("isp1301_omap", 0x2D), @@ -201,8 +193,7 @@ static int __init omap2430_i2c_init(void) { omap_register_i2c_bus(1, 100, sdp2430_i2c1_boardinfo, ARRAY_SIZE(sdp2430_i2c1_boardinfo)); - omap_register_i2c_bus(2, 2600, sdp2430_i2c_boardinfo, - ARRAY_SIZE(sdp2430_i2c_boardinfo)); + omap2_pmic_init("twl4030", &sdp2430_twldata); return 0; } diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c index 3726465..b12400e 100644 --- a/arch/arm/mach-omap2/board-3430sdp.c +++ b/arch/arm/mach-omap2/board-3430sdp.c @@ -528,20 +528,10 @@ static struct twl4030_platform_data sdp3430_twldata = { .vpll2 = &sdp3430_vpll2, }; -static struct i2c_board_info __initdata sdp3430_i2c_boardinfo[] = { - { - I2C_BOARD_INFO("twl4030", 0x48), - .flags = I2C_CLIENT_WAKE, - .irq = INT_34XX_SYS_NIRQ, - .platform_data = &sdp3430_twldata, - }, -}; - static int __init omap3430_i2c_init(void) { /* i2c1 for PMIC only */ - omap_register_i2c_bus(1, 2600, sdp3430_i2c_boardinfo, - ARRAY_SIZE(sdp3430_i2c_boardinfo)); + omap3_pmic_init("twl4030", &sdp3430_twldata); /* i2c2 on camera connector (for sensor control) and optional isp1301 */ omap_register_i2c_bus(2, 400, NULL, 0); /* i2c3 on display connector (for DVI, tfp410) */ diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c index 56702c5..7073542 100644 --- a/arch/arm/mach-omap2/board-4430sdp.c +++ b/arch/arm/mach-omap2/board-4430sdp.c @@ -42,6 +42,7 @@ #include "hsmmc.h" #include "timer-gp.h" #include "control.h" +#include "common-board-devices.h" #define ETH_KS8851_IRQ 34 #define ETH_KS8851_POWER_ON 48 @@ -575,14 +576,6 @@ static struct twl4030_platform_data sdp4430_twldata = { .usb = &omap4_usbphy_data }; -static struct i2c_board_info __initdata sdp4430_i2c_boardinfo[] = { - { - I2C_BOARD_INFO("twl6030", 0x48), - .flags = I2C_CLIENT_WAKE, - .irq = OMAP44XX_IRQ_SYS_1N, - .platform_data = &sdp4430_twldata, - }, -}; static struct i2c_board_info __initdata sdp4430_i2c_3_boardinfo[] = { { I2C_BOARD_INFO("tmp105", 0x48), @@ -598,12 +591,7 @@ static struct i2c_board_info __initdata sdp4430_i2c_4_boardinfo[] = { }; static int __init omap4_i2c_init(void) { - /* - * Phoenix Audio IC needs I2C1 to - * start with 400 KHz or less - */ - omap_register_i2c_bus(1, 400, sdp4430_i2c_boardinfo, - ARRAY_SIZE(sdp4430_i2c_boardinfo)); + omap4_pmic_init("twl6030", &sdp4430_twldata); omap_register_i2c_bus(2, 400, NULL, 0); omap_register_i2c_bus(3, 400, sdp4430_i2c_3_boardinfo, ARRAY_SIZE(sdp4430_i2c_3_boardinfo)); diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c index 4af5cf9..948161d 100644 --- a/arch/arm/mach-omap2/board-cm-t35.c +++ b/arch/arm/mach-omap2/board-cm-t35.c @@ -541,19 +541,9 @@ static struct twl4030_platform_data cm_t35_twldata = { .vpll2 = &cm_t35_vpll2, }; -static struct i2c_board_info __initdata cm_t35_i2c_boardinfo[] = { - { - I2C_BOARD_INFO("tps65930", 0x48), - .flags = I2C_CLIENT_WAKE, - .irq = INT_34XX_SYS_NIRQ, - .platform_data = &cm_t35_twldata, - }, -}; - static void __init cm_t35_init_i2c(void) { - omap_register_i2c_bus(1, 2600, cm_t35_i2c_boardinfo, - ARRAY_SIZE(cm_t35_i2c_boardinfo)); + omap3_pmic_init("tps65930", &cm_t35_twldata); } static void __init cm_t35_init_early(void) diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c index 9f8338d..983f44b 100644 --- a/arch/arm/mach-omap2/board-devkit8000.c +++ b/arch/arm/mach-omap2/board-devkit8000.c @@ -366,19 +366,9 @@ static struct twl4030_platform_data devkit8000_twldata = { .keypad = &devkit8000_kp_data, }; -static struct i2c_board_info __initdata devkit8000_i2c_boardinfo[] = { - { - I2C_BOARD_INFO("tps65930", 0x48), - .flags = I2C_CLIENT_WAKE, - .irq = INT_34XX_SYS_NIRQ, - .platform_data = &devkit8000_twldata, - }, -}; - static int __init devkit8000_i2c_init(void) { - omap_register_i2c_bus(1, 2600, devkit8000_i2c_boardinfo, - ARRAY_SIZE(devkit8000_i2c_boardinfo)); + omap3_pmic_init("tps65930", &devkit8000_twldata); /* Bus 3 is attached to the DVI port where devices like the pico DLP * projector don't work reliably with 400kHz */ omap_register_i2c_bus(3, 400, NULL, 0); diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c index 5b9bde7..a0fd10e 100644 --- a/arch/arm/mach-omap2/board-igep0020.c +++ b/arch/arm/mach-omap2/board-igep0020.c @@ -38,6 +38,7 @@ #include "mux.h" #include "hsmmc.h" #include "sdram-numonyx-m65kxxxxam.h" +#include "common-board-devices.h" #define IGEP2_SMSC911X_CS 5 #define IGEP2_SMSC911X_GPIO 176 @@ -536,15 +537,6 @@ static struct twl4030_platform_data igep2_twldata = { .vio = &igep2_vio, }; -static struct i2c_board_info __initdata igep2_i2c1_boardinfo[] = { - { - I2C_BOARD_INFO("twl4030", 0x48), - .flags = I2C_CLIENT_WAKE, - .irq = INT_34XX_SYS_NIRQ, - .platform_data = &igep2_twldata, - }, -}; - static struct i2c_board_info __initdata igep2_i2c3_boardinfo[] = { { I2C_BOARD_INFO("eeprom", 0x50), @@ -555,10 +547,7 @@ static void __init igep2_i2c_init(void) { int ret; - ret = omap_register_i2c_bus(1, 2600, igep2_i2c1_boardinfo, - ARRAY_SIZE(igep2_i2c1_boardinfo)); - if (ret) - pr_warning("IGEP2: Could not register I2C1 bus (%d)\n", ret); + omap3_pmic_init("twl4030", &igep2_twldata); /* * Bus 3 is attached to the DVI port where devices like the pico DLP diff --git a/arch/arm/mach-omap2/board-igep0030.c b/arch/arm/mach-omap2/board-igep0030.c index 2cf86c3..a831e85 100644 --- a/arch/arm/mach-omap2/board-igep0030.c +++ b/arch/arm/mach-omap2/board-igep0030.c @@ -35,6 +35,7 @@ #include "mux.h" #include "hsmmc.h" #include "sdram-numonyx-m65kxxxxam.h" +#include "common-board-devices.h" #define IGEP3_GPIO_LED0_GREEN 54 #define IGEP3_GPIO_LED0_RED 53 @@ -349,19 +350,9 @@ static struct twl4030_platform_data igep3_twl4030_pdata = { .vio = &igep3_vio, }; -static struct i2c_board_info __initdata igep3_i2c_boardinfo[] = { - { - I2C_BOARD_INFO("twl4030", 0x48), - .flags = I2C_CLIENT_WAKE, - .irq = INT_34XX_SYS_NIRQ, - .platform_data = &igep3_twl4030_pdata, - }, -}; - static int __init igep3_i2c_init(void) { - omap_register_i2c_bus(1, 2600, igep3_i2c_boardinfo, - ARRAY_SIZE(igep3_i2c_boardinfo)); + omap3_pmic_init("twl4030", &igep3_twl4030_pdata); return 0; } diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c index 155b423..7482c75 100644 --- a/arch/arm/mach-omap2/board-ldp.c +++ b/arch/arm/mach-omap2/board-ldp.c @@ -265,19 +265,9 @@ static struct twl4030_platform_data ldp_twldata = { .keypad = &ldp_kp_twl4030_data, }; -static struct i2c_board_info __initdata ldp_i2c_boardinfo[] = { - { - I2C_BOARD_INFO("twl4030", 0x48), - .flags = I2C_CLIENT_WAKE, - .irq = INT_34XX_SYS_NIRQ, - .platform_data = &ldp_twldata, - }, -}; - static int __init omap_i2c_init(void) { - omap_register_i2c_bus(1, 2600, ldp_i2c_boardinfo, - ARRAY_SIZE(ldp_i2c_boardinfo)); + omap3_pmic_init("twl4030", &ldp_twldata); omap_register_i2c_bus(2, 400, NULL, 0); omap_register_i2c_bus(3, 400, NULL, 0); return 0; diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c index 33007fd..13a1664 100644 --- a/arch/arm/mach-omap2/board-omap3beagle.c +++ b/arch/arm/mach-omap2/board-omap3beagle.c @@ -52,6 +52,7 @@ #include "hsmmc.h" #include "timer-gp.h" #include "pm.h" +#include "common-board-devices.h" #define NAND_BLOCK_SIZE SZ_128K @@ -453,15 +454,6 @@ static struct twl4030_platform_data beagle_twldata = { .vpll2 = &beagle_vpll2, }; -static struct i2c_board_info __initdata beagle_i2c_boardinfo[] = { - { - I2C_BOARD_INFO("twl4030", 0x48), - .flags = I2C_CLIENT_WAKE, - .irq = INT_34XX_SYS_NIRQ, - .platform_data = &beagle_twldata, - }, -}; - static struct i2c_board_info __initdata beagle_i2c_eeprom[] = { { I2C_BOARD_INFO("eeprom", 0x50), @@ -470,8 +462,7 @@ static struct i2c_board_info __initdata beagle_i2c_eeprom[] = { static int __init omap3_beagle_i2c_init(void) { - omap_register_i2c_bus(1, 2600, beagle_i2c_boardinfo, - ARRAY_SIZE(beagle_i2c_boardinfo)); + omap3_pmic_init("twl4030", &beagle_twldata); /* Bus 3 is attached to the DVI port where devices like the pico DLP * projector don't work reliably with 400kHz */ omap_register_i2c_bus(3, 100, beagle_i2c_eeprom, ARRAY_SIZE(beagle_i2c_eeprom)); diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c index 376ea87..5066b0b 100644 --- a/arch/arm/mach-omap2/board-omap3evm.c +++ b/arch/arm/mach-omap2/board-omap3evm.c @@ -604,28 +604,13 @@ static struct twl4030_platform_data omap3evm_twldata = { .vdac = &omap3_evm_vdac, .vpll2 = &omap3_evm_vpll2, .vio = &omap3evm_vio, -}; - -static struct i2c_board_info __initdata omap3evm_i2c_boardinfo[] = { - { - I2C_BOARD_INFO("twl4030", 0x48), - .flags = I2C_CLIENT_WAKE, - .irq = INT_34XX_SYS_NIRQ, - .platform_data = &omap3evm_twldata, - }, + .vmmc1 = &omap3evm_vmmc1, + .vsim = &omap3evm_vsim, }; static int __init omap3_evm_i2c_init(void) { - /* - * REVISIT: These entries can be set in omap3evm_twl_data - * after a merge with MFD tree - */ - omap3evm_twldata.vmmc1 = &omap3evm_vmmc1; - omap3evm_twldata.vsim = &omap3evm_vsim; - - omap_register_i2c_bus(1, 2600, omap3evm_i2c_boardinfo, - ARRAY_SIZE(omap3evm_i2c_boardinfo)); + omap3_pmic_init("twl4030", &omap3evm_twldata); omap_register_i2c_bus(2, 400, NULL, 0); omap_register_i2c_bus(3, 400, NULL, 0); return 0; diff --git a/arch/arm/mach-omap2/board-omap3logic.c b/arch/arm/mach-omap2/board-omap3logic.c index a49e6cf..60d9be4 100644 --- a/arch/arm/mach-omap2/board-omap3logic.c +++ b/arch/arm/mach-omap2/board-omap3logic.c @@ -37,6 +37,7 @@ #include "hsmmc.h" #include "timer-gp.h" #include "control.h" +#include "common-board-devices.h" #include #include @@ -93,19 +94,9 @@ static struct twl4030_platform_data omap3logic_twldata = { .vmmc1 = &omap3logic_vmmc1, }; -static struct i2c_board_info __initdata omap3logic_i2c_boardinfo[] = { - { - I2C_BOARD_INFO("twl4030", 0x48), - .flags = I2C_CLIENT_WAKE, - .irq = INT_34XX_SYS_NIRQ, - .platform_data = &omap3logic_twldata, - }, -}; - static int __init omap3logic_i2c_init(void) { - omap_register_i2c_bus(1, 2600, omap3logic_i2c_boardinfo, - ARRAY_SIZE(omap3logic_i2c_boardinfo)); + omap3_pmic_init("twl4030", &omap3logic_twldata); return 0; } diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c index 517701a..b99cc64 100644 --- a/arch/arm/mach-omap2/board-omap3pandora.c +++ b/arch/arm/mach-omap2/board-omap3pandora.c @@ -544,15 +544,6 @@ static struct twl4030_platform_data omap3pandora_twldata = { .bci = &pandora_bci_data, }; -static struct i2c_board_info __initdata omap3pandora_i2c_boardinfo[] = { - { - I2C_BOARD_INFO("tps65950", 0x48), - .flags = I2C_CLIENT_WAKE, - .irq = INT_34XX_SYS_NIRQ, - .platform_data = &omap3pandora_twldata, - }, -}; - static struct i2c_board_info __initdata omap3pandora_i2c3_boardinfo[] = { { I2C_BOARD_INFO("bq27500", 0x55), @@ -562,8 +553,7 @@ static struct i2c_board_info __initdata omap3pandora_i2c3_boardinfo[] = { static int __init omap3pandora_i2c_init(void) { - omap_register_i2c_bus(1, 2600, omap3pandora_i2c_boardinfo, - ARRAY_SIZE(omap3pandora_i2c_boardinfo)); + omap3_pmic_init("tps65950", &omap3pandora_twldata); /* i2c2 pins are not connected */ omap_register_i2c_bus(3, 100, omap3pandora_i2c3_boardinfo, ARRAY_SIZE(omap3pandora_i2c3_boardinfo)); diff --git a/arch/arm/mach-omap2/board-omap3stalker.c b/arch/arm/mach-omap2/board-omap3stalker.c index 671ceb0..a1d550f 100644 --- a/arch/arm/mach-omap2/board-omap3stalker.c +++ b/arch/arm/mach-omap2/board-omap3stalker.c @@ -455,15 +455,8 @@ static struct twl4030_platform_data omap3stalker_twldata = { .codec = &omap3stalker_codec_data, .vdac = &omap3_stalker_vdac, .vpll2 = &omap3_stalker_vpll2, -}; - -static struct i2c_board_info __initdata omap3stalker_i2c_boardinfo[] = { - { - I2C_BOARD_INFO("twl4030", 0x48), - .flags = I2C_CLIENT_WAKE, - .irq = INT_34XX_SYS_NIRQ, - .platform_data = &omap3stalker_twldata, - }, + .vmmc1 = &omap3stalker_vmmc1, + .vsim = &omap3stalker_vsim, }; static struct at24_platform_data fram_info = { @@ -482,15 +475,7 @@ static struct i2c_board_info __initdata omap3stalker_i2c_boardinfo3[] = { static int __init omap3_stalker_i2c_init(void) { - /* - * REVISIT: These entries can be set in omap3evm_twl_data - * after a merge with MFD tree - */ - omap3stalker_twldata.vmmc1 = &omap3stalker_vmmc1; - omap3stalker_twldata.vsim = &omap3stalker_vsim; - - omap_register_i2c_bus(1, 2600, omap3stalker_i2c_boardinfo, - ARRAY_SIZE(omap3stalker_i2c_boardinfo)); + omap3_pmic_init("twl4030", &omap3stalker_twldata); omap_register_i2c_bus(2, 400, NULL, 0); omap_register_i2c_bus(3, 400, omap3stalker_i2c_boardinfo3, ARRAY_SIZE(omap3stalker_i2c_boardinfo3)); diff --git a/arch/arm/mach-omap2/board-omap3touchbook.c b/arch/arm/mach-omap2/board-omap3touchbook.c index 15f9d7d..0a9b329 100644 --- a/arch/arm/mach-omap2/board-omap3touchbook.c +++ b/arch/arm/mach-omap2/board-omap3touchbook.c @@ -274,15 +274,6 @@ static struct twl4030_platform_data touchbook_twldata = { .vpll2 = &touchbook_vpll2, }; -static struct i2c_board_info __initdata touchbook_i2c_boardinfo[] = { - { - I2C_BOARD_INFO("twl4030", 0x48), - .flags = I2C_CLIENT_WAKE, - .irq = INT_34XX_SYS_NIRQ, - .platform_data = &touchbook_twldata, - }, -}; - static struct i2c_board_info __initdata touchBook_i2c_boardinfo[] = { { I2C_BOARD_INFO("bq27200", 0x55), @@ -292,8 +283,7 @@ static struct i2c_board_info __initdata touchBook_i2c_boardinfo[] = { static int __init omap3_touchbook_i2c_init(void) { /* Standard TouchBook bus */ - omap_register_i2c_bus(1, 2600, touchbook_i2c_boardinfo, - ARRAY_SIZE(touchbook_i2c_boardinfo)); + omap3_pmic_init("twl4030", &touchbook_twldata); /* Additional TouchBook bus */ omap_register_i2c_bus(3, 100, touchBook_i2c_boardinfo, diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c index f3a7b10..7eaad62 100644 --- a/arch/arm/mach-omap2/board-omap4panda.c +++ b/arch/arm/mach-omap2/board-omap4panda.c @@ -46,6 +46,7 @@ #include "hsmmc.h" #include "control.h" #include "mux.h" +#include "common-board-devices.h" #define GPIO_HUB_POWER 1 #define GPIO_HUB_NRESET 62 @@ -408,15 +409,6 @@ static struct twl4030_platform_data omap4_panda_twldata = { .usb = &omap4_usbphy_data, }; -static struct i2c_board_info __initdata omap4_panda_i2c_boardinfo[] = { - { - I2C_BOARD_INFO("twl6030", 0x48), - .flags = I2C_CLIENT_WAKE, - .irq = OMAP44XX_IRQ_SYS_1N, - .platform_data = &omap4_panda_twldata, - }, -}; - /* * Display monitor features are burnt in their EEPROM as EDID data. The EEPROM * is connected as I2C slave device, and can be accessed at address 0x50 @@ -429,12 +421,7 @@ static struct i2c_board_info __initdata panda_i2c_eeprom[] = { static int __init omap4_panda_i2c_init(void) { - /* - * Phoenix Audio IC needs I2C1 to - * start with 400 KHz or less - */ - omap_register_i2c_bus(1, 400, omap4_panda_i2c_boardinfo, - ARRAY_SIZE(omap4_panda_i2c_boardinfo)); + omap4_pmic_init("twl6030", &omap4_panda_twldata); omap_register_i2c_bus(2, 400, NULL, 0); /* * Bus 3 is attached to the DVI port where devices like the pico DLP diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c index 4a02f84..809d3944 100644 --- a/arch/arm/mach-omap2/board-overo.c +++ b/arch/arm/mach-omap2/board-overo.c @@ -540,19 +540,9 @@ static struct twl4030_platform_data overo_twldata = { .vpll2 = &overo_vpll2, }; -static struct i2c_board_info __initdata overo_i2c_boardinfo[] = { - { - I2C_BOARD_INFO("tps65950", 0x48), - .flags = I2C_CLIENT_WAKE, - .irq = INT_34XX_SYS_NIRQ, - .platform_data = &overo_twldata, - }, -}; - static int __init overo_i2c_init(void) { - omap_register_i2c_bus(1, 2600, overo_i2c_boardinfo, - ARRAY_SIZE(overo_i2c_boardinfo)); + omap3_pmic_init("tps65950", &overo_twldata); /* i2c2 pins are used for gpio */ omap_register_i2c_bus(3, 400, NULL, 0); return 0; diff --git a/arch/arm/mach-omap2/board-rm680.c b/arch/arm/mach-omap2/board-rm680.c index 2af8b05..8e710ff 100644 --- a/arch/arm/mach-omap2/board-rm680.c +++ b/arch/arm/mach-omap2/board-rm680.c @@ -31,6 +31,7 @@ #include "mux.h" #include "hsmmc.h" #include "sdram-nokia.h" +#include "common-board-devices.h" static struct regulator_consumer_supply rm680_vemmc_consumers[] = { REGULATOR_SUPPLY("vmmc", "omap_hsmmc.1"), @@ -90,19 +91,9 @@ static struct twl4030_platform_data rm680_twl_data = { /* add rest of the children here */ }; -static struct i2c_board_info __initdata rm680_twl_i2c_board_info[] = { - { - I2C_BOARD_INFO("twl5031", 0x48), - .flags = I2C_CLIENT_WAKE, - .irq = INT_34XX_SYS_NIRQ, - .platform_data = &rm680_twl_data, - }, -}; - static void __init rm680_i2c_init(void) { - omap_register_i2c_bus(1, 2900, rm680_twl_i2c_board_info, - ARRAY_SIZE(rm680_twl_i2c_board_info)); + omap_pmic_init(1, 2900, "twl5031", INT_34XX_SYS_NIRQ, &rm680_twl_data); omap_register_i2c_bus(2, 400, NULL, 0); omap_register_i2c_bus(3, 400, NULL, 0); } diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c index bbcb677..a5bf5e9 100644 --- a/arch/arm/mach-omap2/board-rx51-peripherals.c +++ b/arch/arm/mach-omap2/board-rx51-peripherals.c @@ -43,6 +43,7 @@ #include "mux.h" #include "hsmmc.h" +#include "common-board-devices.h" #define SYSTEM_REV_B_USES_VAUX3 0x1699 #define SYSTEM_REV_S_USES_VAUX3 0x8 @@ -777,15 +778,6 @@ static struct tpa6130a2_platform_data rx51_tpa6130a2_data __initdata_or_module = .power_gpio = 98, }; -static struct i2c_board_info __initdata rx51_peripherals_i2c_board_info_1[] = { - { - I2C_BOARD_INFO("twl5030", 0x48), - .flags = I2C_CLIENT_WAKE, - .irq = INT_34XX_SYS_NIRQ, - .platform_data = &rx51_twldata, - }, -}; - /* Audio setup data */ static struct aic3x_setup_data rx51_aic34_setup = { .gpio_func[0] = AIC3X_GPIO1_FUNC_DISABLED, @@ -833,8 +825,7 @@ static int __init rx51_i2c_init(void) rx51_twldata.vaux3 = &rx51_vaux3_cam; } rx51_twldata.vmmc2 = &rx51_vmmc2; - omap_register_i2c_bus(1, 2200, rx51_peripherals_i2c_board_info_1, - ARRAY_SIZE(rx51_peripherals_i2c_board_info_1)); + omap_pmic_init(1, 2200, "twl5030", INT_34XX_SYS_NIRQ, &rx51_twldata); omap_register_i2c_bus(2, 100, rx51_peripherals_i2c_board_info_2, ARRAY_SIZE(rx51_peripherals_i2c_board_info_2)); omap_register_i2c_bus(3, 400, NULL, 0); diff --git a/arch/arm/mach-omap2/board-zoom-peripherals.c b/arch/arm/mach-omap2/board-zoom-peripherals.c index 8dee754..e4870c2 100644 --- a/arch/arm/mach-omap2/board-zoom-peripherals.c +++ b/arch/arm/mach-omap2/board-zoom-peripherals.c @@ -31,6 +31,7 @@ #include "mux.h" #include "hsmmc.h" +#include "common-board-devices.h" #define OMAP_ZOOM_WLAN_PMENA_GPIO (101) #define OMAP_ZOOM_WLAN_IRQ_GPIO (162) @@ -349,15 +350,6 @@ static struct twl4030_platform_data zoom_twldata = { .vdac = &zoom_vdac, }; -static struct i2c_board_info __initdata zoom_i2c_boardinfo[] = { - { - I2C_BOARD_INFO("twl5030", 0x48), - .flags = I2C_CLIENT_WAKE, - .irq = INT_34XX_SYS_NIRQ, - .platform_data = &zoom_twldata, - }, -}; - static int __init omap_i2c_init(void) { if (machine_is_omap_zoom2()) { @@ -365,8 +357,7 @@ static int __init omap_i2c_init(void) zoom_audio_data.hs_extmute = 1; zoom_audio_data.set_hs_extmute = zoom2_set_hs_extmute; } - omap_register_i2c_bus(1, 2400, zoom_i2c_boardinfo, - ARRAY_SIZE(zoom_i2c_boardinfo)); + omap_pmic_init(1, 2400, "twl5030", INT_34XX_SYS_NIRQ, &zoom_twldata); omap_register_i2c_bus(2, 400, NULL, 0); omap_register_i2c_bus(3, 400, NULL, 0); return 0; diff --git a/arch/arm/mach-omap2/common-board-devices.c b/arch/arm/mach-omap2/common-board-devices.c index fad41ec..cea31dd 100644 --- a/arch/arm/mach-omap2/common-board-devices.c +++ b/arch/arm/mach-omap2/common-board-devices.c @@ -20,14 +20,35 @@ * */ +#include +#include + #include #include #include +#include #include #include "common-board-devices.h" +static struct i2c_board_info __initdata pmic_i2c_board_info = { + .addr = 0x48, + .flags = I2C_CLIENT_WAKE, +}; + +void __init omap_pmic_init(int bus, u32 clkrate, + const char *pmic_type, int pmic_irq, + struct twl4030_platform_data *pmic_data) +{ + strncpy(pmic_i2c_board_info.type, pmic_type, + sizeof(pmic_i2c_board_info.type)); + pmic_i2c_board_info.irq = pmic_irq; + pmic_i2c_board_info.platform_data = pmic_data; + + omap_register_i2c_bus(bus, clkrate, &pmic_i2c_board_info, 1); +} + static struct omap2_mcspi_device_config ads7846_mcspi_config = { .turbo_mode = 0, .single_channel = 1, /* 0: slave, 1: master */ diff --git a/arch/arm/mach-omap2/common-board-devices.h b/arch/arm/mach-omap2/common-board-devices.h index 75f9248d..0ec3e07 100644 --- a/arch/arm/mach-omap2/common-board-devices.h +++ b/arch/arm/mach-omap2/common-board-devices.h @@ -1,6 +1,30 @@ #ifndef __OMAP_COMMON_BOARD_DEVICES__ #define __OMAP_COMMON_BOARD_DEVICES__ +struct twl4030_platform_data; + +void omap_pmic_init(int bus, u32 clkrate, const char *pmic_type, int pmic_irq, + struct twl4030_platform_data *pmic_data); + +static inline void omap2_pmic_init(const char *pmic_type, + struct twl4030_platform_data *pmic_data) +{ + omap_pmic_init(2, 2600, pmic_type, INT_24XX_SYS_NIRQ, pmic_data); +} + +static inline void omap3_pmic_init(const char *pmic_type, + struct twl4030_platform_data *pmic_data) +{ + omap_pmic_init(1, 2600, pmic_type, INT_34XX_SYS_NIRQ, pmic_data); +} + +static inline void omap4_pmic_init(const char *pmic_type, + struct twl4030_platform_data *pmic_data) +{ + /* Phoenix Audio IC needs I2C1 to start with 400 KHz or less */ + omap_pmic_init(1, 400, pmic_type, OMAP44XX_IRQ_SYS_1N, pmic_data); +} + #if defined(CONFIG_TOUCHSCREEN_ADS7846) || \ defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE) struct ads7846_platform_data; -- cgit v0.10.2 From 9a3f39ff36e11ea6b6c8b5f90337a864cb7e81f6 Mon Sep 17 00:00:00 2001 From: Mike Rapoport Date: Mon, 25 Apr 2011 01:09:07 +0300 Subject: omap: move detection of NAND CS to common-board-devices and reduce amount of copy/paste Signed-off-by: Mike Rapoport CC: Oleg Drokin Signed-off-by: Tony Lindgren diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c index 983f44b..e7dc057 100644 --- a/arch/arm/mach-omap2/board-devkit8000.c +++ b/arch/arm/mach-omap2/board-devkit8000.c @@ -97,13 +97,6 @@ static struct mtd_partition devkit8000_nand_partitions[] = { }, }; -static struct omap_nand_platform_data devkit8000_nand_data = { - .options = NAND_BUSWIDTH_16, - .parts = devkit8000_nand_partitions, - .nr_parts = ARRAY_SIZE(devkit8000_nand_partitions), - .dma_channel = -1, /* disable DMA in OMAP NAND driver */ -}; - static struct omap2_hsmmc_info mmc[] = { { .mmc = 1, @@ -516,39 +509,6 @@ static struct platform_device *devkit8000_devices[] __initdata = { &omap_dm9000_dev, }; -static void __init devkit8000_flash_init(void) -{ - u8 cs = 0; - u8 nandcs = GPMC_CS_NUM + 1; - - /* find out the chip-select on which NAND exists */ - while (cs < GPMC_CS_NUM) { - u32 ret = 0; - ret = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG1); - - if ((ret & 0xC00) == 0x800) { - printk(KERN_INFO "Found NAND on CS%d\n", cs); - if (nandcs > GPMC_CS_NUM) - nandcs = cs; - } - cs++; - } - - if (nandcs > GPMC_CS_NUM) { - printk(KERN_INFO "NAND: Unable to find configuration " - "in GPMC\n "); - return; - } - - if (nandcs < GPMC_CS_NUM) { - devkit8000_nand_data.cs = nandcs; - - printk(KERN_INFO "Registering NAND on CS%d\n", nandcs); - if (gpmc_nand_init(&devkit8000_nand_data) < 0) - printk(KERN_ERR "Unable to register NAND device\n"); - } -} - static struct omap_musb_board_data musb_board_data = { .interface_type = MUSB_INTERFACE_ULPI, .mode = MUSB_OTG, @@ -740,7 +700,8 @@ static void __init devkit8000_init(void) usb_musb_init(&musb_board_data); usbhs_init(&usbhs_bdata); - devkit8000_flash_init(); + omap_nand_flash_init(NAND_BUSWIDTH_16, devkit8000_nand_partitions, + ARRAY_SIZE(devkit8000_nand_partitions)); /* Ensure SDRC pins are mux'd for self-refresh */ omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT); diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c index 13a1664..ce3bc2d 100644 --- a/arch/arm/mach-omap2/board-omap3beagle.c +++ b/arch/arm/mach-omap2/board-omap3beagle.c @@ -174,15 +174,6 @@ static struct mtd_partition omap3beagle_nand_partitions[] = { }, }; -static struct omap_nand_platform_data omap3beagle_nand_data = { - .options = NAND_BUSWIDTH_16, - .parts = omap3beagle_nand_partitions, - .nr_parts = ARRAY_SIZE(omap3beagle_nand_partitions), - .dma_channel = -1, /* disable DMA in OMAP NAND driver */ - .nand_setup = NULL, - .dev_ready = NULL, -}; - /* DSS */ static int beagle_enable_dvi(struct omap_dss_device *dssdev) @@ -542,39 +533,6 @@ static struct platform_device *omap3_beagle_devices[] __initdata = { &keys_gpio, }; -static void __init omap3beagle_flash_init(void) -{ - u8 cs = 0; - u8 nandcs = GPMC_CS_NUM + 1; - - /* find out the chip-select on which NAND exists */ - while (cs < GPMC_CS_NUM) { - u32 ret = 0; - ret = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG1); - - if ((ret & 0xC00) == 0x800) { - printk(KERN_INFO "Found NAND on CS%d\n", cs); - if (nandcs > GPMC_CS_NUM) - nandcs = cs; - } - cs++; - } - - if (nandcs > GPMC_CS_NUM) { - printk(KERN_INFO "NAND: Unable to find configuration " - "in GPMC\n "); - return; - } - - if (nandcs < GPMC_CS_NUM) { - omap3beagle_nand_data.cs = nandcs; - - printk(KERN_INFO "Registering NAND on CS%d\n", nandcs); - if (gpmc_nand_init(&omap3beagle_nand_data) < 0) - printk(KERN_ERR "Unable to register NAND device\n"); - } -} - static const struct usbhs_omap_board_data usbhs_bdata __initconst = { .port_mode[0] = OMAP_EHCI_PORT_MODE_PHY, @@ -662,7 +620,8 @@ static void __init omap3_beagle_init(void) usb_musb_init(&musb_board_data); usbhs_init(&usbhs_bdata); - omap3beagle_flash_init(); + omap_nand_flash_init(NAND_BUSWIDTH_16, omap3beagle_nand_partitions, + ARRAY_SIZE(omap3beagle_nand_partitions)); /* Ensure SDRC pins are mux'd for self-refresh */ omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT); diff --git a/arch/arm/mach-omap2/board-omap3touchbook.c b/arch/arm/mach-omap2/board-omap3touchbook.c index 0a9b329..d770802 100644 --- a/arch/arm/mach-omap2/board-omap3touchbook.c +++ b/arch/arm/mach-omap2/board-omap3touchbook.c @@ -96,15 +96,6 @@ static struct mtd_partition omap3touchbook_nand_partitions[] = { }, }; -static struct omap_nand_platform_data omap3touchbook_nand_data = { - .options = NAND_BUSWIDTH_16, - .parts = omap3touchbook_nand_partitions, - .nr_parts = ARRAY_SIZE(omap3touchbook_nand_partitions), - .dma_channel = -1, /* disable DMA in OMAP NAND driver */ - .nand_setup = NULL, - .dev_ready = NULL, -}; - #include "sdram-micron-mt46h32m32lf-6.h" static struct omap2_hsmmc_info mmc[] = { @@ -396,39 +387,6 @@ static struct platform_device *omap3_touchbook_devices[] __initdata = { &keys_gpio, }; -static void __init omap3touchbook_flash_init(void) -{ - u8 cs = 0; - u8 nandcs = GPMC_CS_NUM + 1; - - /* find out the chip-select on which NAND exists */ - while (cs < GPMC_CS_NUM) { - u32 ret = 0; - ret = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG1); - - if ((ret & 0xC00) == 0x800) { - printk(KERN_INFO "Found NAND on CS%d\n", cs); - if (nandcs > GPMC_CS_NUM) - nandcs = cs; - } - cs++; - } - - if (nandcs > GPMC_CS_NUM) { - printk(KERN_INFO "NAND: Unable to find configuration " - "in GPMC\n "); - return; - } - - if (nandcs < GPMC_CS_NUM) { - omap3touchbook_nand_data.cs = nandcs; - - printk(KERN_INFO "Registering NAND on CS%d\n", nandcs); - if (gpmc_nand_init(&omap3touchbook_nand_data) < 0) - printk(KERN_ERR "Unable to register NAND device\n"); - } -} - static const struct usbhs_omap_board_data usbhs_bdata __initconst = { .port_mode[0] = OMAP_EHCI_PORT_MODE_PHY, @@ -491,7 +449,8 @@ static void __init omap3_touchbook_init(void) omap_ads7846_init(4, OMAP3_TS_GPIO, 310, &ads7846_pdata); usb_musb_init(&musb_board_data); usbhs_init(&usbhs_bdata); - omap3touchbook_flash_init(); + omap_nand_flash_init(NAND_BUSWIDTH_16, omap3touchbook_nand_partitions, + ARRAY_SIZE(omap3touchbook_nand_partitions)); /* Ensure SDRC pins are mux'd for self-refresh */ omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT); diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c index 809d3944..7ad2d7f 100644 --- a/arch/arm/mach-omap2/board-overo.c +++ b/arch/arm/mach-omap2/board-overo.c @@ -304,45 +304,6 @@ static struct mtd_partition overo_nand_partitions[] = { }, }; -static struct omap_nand_platform_data overo_nand_data = { - .parts = overo_nand_partitions, - .nr_parts = ARRAY_SIZE(overo_nand_partitions), - .dma_channel = -1, /* disable DMA in OMAP NAND driver */ -}; - -static void __init overo_flash_init(void) -{ - u8 cs = 0; - u8 nandcs = GPMC_CS_NUM + 1; - - /* find out the chip-select on which NAND exists */ - while (cs < GPMC_CS_NUM) { - u32 ret = 0; - ret = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG1); - - if ((ret & 0xC00) == 0x800) { - printk(KERN_INFO "Found NAND on CS%d\n", cs); - if (nandcs > GPMC_CS_NUM) - nandcs = cs; - } - cs++; - } - - if (nandcs > GPMC_CS_NUM) { - printk(KERN_INFO "NAND: Unable to find configuration " - "in GPMC\n "); - return; - } - - if (nandcs < GPMC_CS_NUM) { - overo_nand_data.cs = nandcs; - - printk(KERN_INFO "Registering NAND on CS%d\n", nandcs); - if (gpmc_nand_init(&overo_nand_data) < 0) - printk(KERN_ERR "Unable to register NAND device\n"); - } -} - static struct omap2_hsmmc_info mmc[] = { { .mmc = 1, @@ -604,7 +565,8 @@ static void __init overo_init(void) overo_i2c_init(); omap_display_init(&overo_dss_data); omap_serial_init(); - overo_flash_init(); + omap_nand_flash_init(0, overo_nand_partitions, + ARRAY_SIZE(overo_nand_partitions)); usb_musb_init(&musb_board_data); usbhs_init(&usbhs_bdata); overo_spi_init(); diff --git a/arch/arm/mach-omap2/common-board-devices.c b/arch/arm/mach-omap2/common-board-devices.c index cea31dd..e94903b 100644 --- a/arch/arm/mach-omap2/common-board-devices.c +++ b/arch/arm/mach-omap2/common-board-devices.c @@ -29,6 +29,7 @@ #include #include +#include #include "common-board-devices.h" @@ -49,6 +50,8 @@ void __init omap_pmic_init(int bus, u32 clkrate, omap_register_i2c_bus(bus, clkrate, &pmic_i2c_board_info, 1); } +#if defined(CONFIG_TOUCHSCREEN_ADS7846) || \ + defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE) static struct omap2_mcspi_device_config ads7846_mcspi_config = { .turbo_mode = 0, .single_channel = 1, /* 0: slave, 1: master */ @@ -104,3 +107,57 @@ void __init omap_ads7846_init(int bus_num, int gpio_pendown, int gpio_debounce, spi_register_board_info(&ads7846_spi_board_info, 1); } +#else +void __init omap_ads7846_init(int bus_num, int gpio_pendown, int gpio_debounce, + struct ads7846_platform_data *board_pdata) +{ +} +#endif + +#if defined(CONFIG_MTD_NAND_OMAP2) || defined(CONFIG_MTD_NAND_OMAP2_MODULE) +static struct omap_nand_platform_data nand_data = { + .dma_channel = -1, /* disable DMA in OMAP NAND driver */ +}; + +void __init omap_nand_flash_init(int options, struct mtd_partition *parts, + int nr_parts) +{ + u8 cs = 0; + u8 nandcs = GPMC_CS_NUM + 1; + + /* find out the chip-select on which NAND exists */ + while (cs < GPMC_CS_NUM) { + u32 ret = 0; + ret = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG1); + + if ((ret & 0xC00) == 0x800) { + printk(KERN_INFO "Found NAND on CS%d\n", cs); + if (nandcs > GPMC_CS_NUM) + nandcs = cs; + } + cs++; + } + + if (nandcs > GPMC_CS_NUM) { + printk(KERN_INFO "NAND: Unable to find configuration " + "in GPMC\n "); + return; + } + + if (nandcs < GPMC_CS_NUM) { + nand_data.cs = nandcs; + nand_data.parts = parts; + nand_data.nr_parts = nr_parts; + nand_data.options = options; + + printk(KERN_INFO "Registering NAND on CS%d\n", nandcs); + if (gpmc_nand_init(&nand_data) < 0) + printk(KERN_ERR "Unable to register NAND device\n"); + } +} +#else +void __init omap_nand_flash_init(int options, struct mtd_partition *parts, + int nr_parts) +{ +} +#endif diff --git a/arch/arm/mach-omap2/common-board-devices.h b/arch/arm/mach-omap2/common-board-devices.h index 0ec3e07..eb80b3b 100644 --- a/arch/arm/mach-omap2/common-board-devices.h +++ b/arch/arm/mach-omap2/common-board-devices.h @@ -2,6 +2,7 @@ #define __OMAP_COMMON_BOARD_DEVICES__ struct twl4030_platform_data; +struct mtd_partition; void omap_pmic_init(int bus, u32 clkrate, const char *pmic_type, int pmic_irq, struct twl4030_platform_data *pmic_data); @@ -25,18 +26,10 @@ static inline void omap4_pmic_init(const char *pmic_type, omap_pmic_init(1, 400, pmic_type, OMAP44XX_IRQ_SYS_1N, pmic_data); } -#if defined(CONFIG_TOUCHSCREEN_ADS7846) || \ - defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE) struct ads7846_platform_data; void omap_ads7846_init(int bus_num, int gpio_pendown, int gpio_debounce, struct ads7846_platform_data *board_pdata); -#else -static inline void omap_ads7846_init(int bus_num, - int gpio_pendown, int gpio_debounce, - struct ads7846_platform_data *board_data) -{ -} -#endif +void omap_nand_flash_init(int opts, struct mtd_partition *parts, int n_parts); #endif /* __OMAP_COMMON_BOARD_DEVICES__ */ -- cgit v0.10.2 From 9e18630b689d658d65bf59508bfec084f61ff5c6 Mon Sep 17 00:00:00 2001 From: Mike Rapoport Date: Wed, 27 Apr 2011 11:56:12 +0300 Subject: omap: musb: introduce default board config Most boards use exactly the same configuration for musb initialization. Create a default that can be shared amount different boards. Signed-off-by: Mike Rapoport Acked-by: Felipe Balbi Signed-off-by: Tony Lindgren diff --git a/arch/arm/mach-omap2/board-2430sdp.c b/arch/arm/mach-omap2/board-2430sdp.c index 99b3f2d..a8810f8 100644 --- a/arch/arm/mach-omap2/board-2430sdp.c +++ b/arch/arm/mach-omap2/board-2430sdp.c @@ -208,11 +208,6 @@ static struct omap2_hsmmc_info mmc[] __initdata = { {} /* Terminator */ }; -static struct omap_musb_board_data musb_board_data = { - .interface_type = MUSB_INTERFACE_ULPI, - .mode = MUSB_OTG, - .power = 100, -}; static struct omap_usb_config sdp2430_usb_config __initdata = { .otg = 1, #ifdef CONFIG_USB_GADGET_OMAP @@ -246,7 +241,7 @@ static void __init omap_2430sdp_init(void) omap2_usbfs_init(&sdp2430_usb_config); omap_mux_init_signal("usb0hs_stp", OMAP_PULL_ENA | OMAP_PULL_UP); - usb_musb_init(&musb_board_data); + usb_musb_init(NULL); board_smc91x_init(); diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c index b12400e..951e585 100644 --- a/arch/arm/mach-omap2/board-3430sdp.c +++ b/arch/arm/mach-omap2/board-3430sdp.c @@ -810,12 +810,6 @@ static struct flash_partitions sdp_flash_partitions[] = { }, }; -static struct omap_musb_board_data musb_board_data = { - .interface_type = MUSB_INTERFACE_ULPI, - .mode = MUSB_OTG, - .power = 100, -}; - static void __init omap_3430sdp_init(void) { int gpio_pendown; @@ -832,7 +826,7 @@ static void __init omap_3430sdp_init(void) gpio_pendown = SDP3430_TS_GPIO_IRQ_SDPV1; omap_ads7846_init(1, gpio_pendown, 310, NULL); board_serial_init(); - usb_musb_init(&musb_board_data); + usb_musb_init(NULL); board_smc91x_init(); board_flash_init(sdp_flash_partitions, chip_sel_3430, 0); sdp3430_display_init(); diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c index 948161d..e0e2d48 100644 --- a/arch/arm/mach-omap2/board-cm-t35.c +++ b/arch/arm/mach-omap2/board-cm-t35.c @@ -653,12 +653,6 @@ static struct omap_board_mux board_mux[] __initdata = { }; #endif -static struct omap_musb_board_data musb_board_data = { - .interface_type = MUSB_INTERFACE_ULPI, - .mode = MUSB_OTG, - .power = 100, -}; - static struct omap_board_config_kernel cm_t35_config[] __initdata = { }; @@ -675,7 +669,7 @@ static void __init cm_t35_init(void) cm_t35_init_led(); cm_t35_init_display(); - usb_musb_init(&musb_board_data); + usb_musb_init(NULL); usbhs_init(&usbhs_bdata); } diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c index e7dc057..405542a 100644 --- a/arch/arm/mach-omap2/board-devkit8000.c +++ b/arch/arm/mach-omap2/board-devkit8000.c @@ -509,12 +509,6 @@ static struct platform_device *devkit8000_devices[] __initdata = { &omap_dm9000_dev, }; -static struct omap_musb_board_data musb_board_data = { - .interface_type = MUSB_INTERFACE_ULPI, - .mode = MUSB_OTG, - .power = 100, -}; - static const struct usbhs_omap_board_data usbhs_bdata __initconst = { .port_mode[0] = OMAP_EHCI_PORT_MODE_PHY, @@ -698,7 +692,7 @@ static void __init devkit8000_init(void) omap_ads7846_init(2, OMAP3_DEVKIT_TS_GPIO, 0, NULL); - usb_musb_init(&musb_board_data); + usb_musb_init(NULL); usbhs_init(&usbhs_bdata); omap_nand_flash_init(NAND_BUSWIDTH_16, devkit8000_nand_partitions, ARRAY_SIZE(devkit8000_nand_partitions)); diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c index a0fd10e..2c9a919 100644 --- a/arch/arm/mach-omap2/board-igep0020.c +++ b/arch/arm/mach-omap2/board-igep0020.c @@ -559,12 +559,6 @@ static void __init igep2_i2c_init(void) pr_warning("IGEP2: Could not register I2C3 bus (%d)\n", ret); } -static struct omap_musb_board_data musb_board_data = { - .interface_type = MUSB_INTERFACE_ULPI, - .mode = MUSB_OTG, - .power = 100, -}; - static const struct usbhs_omap_board_data usbhs_bdata __initconst = { .port_mode[0] = OMAP_EHCI_PORT_MODE_PHY, .port_mode[1] = OMAP_USBHS_PORT_MODE_UNUSED, @@ -637,7 +631,7 @@ static void __init igep2_init(void) platform_add_devices(igep2_devices, ARRAY_SIZE(igep2_devices)); omap_display_init(&igep2_dss_data); omap_serial_init(); - usb_musb_init(&musb_board_data); + usb_musb_init(NULL); usbhs_init(&usbhs_bdata); igep2_flash_init(); diff --git a/arch/arm/mach-omap2/board-igep0030.c b/arch/arm/mach-omap2/board-igep0030.c index a831e85..512a7eb 100644 --- a/arch/arm/mach-omap2/board-igep0030.c +++ b/arch/arm/mach-omap2/board-igep0030.c @@ -357,12 +357,6 @@ static int __init igep3_i2c_init(void) return 0; } -static struct omap_musb_board_data musb_board_data = { - .interface_type = MUSB_INTERFACE_ULPI, - .mode = MUSB_OTG, - .power = 100, -}; - #if defined(CONFIG_LIBERTAS_SDIO) || defined(CONFIG_LIBERTAS_SDIO_MODULE) static void __init igep3_wifi_bt_init(void) @@ -424,7 +418,7 @@ static void __init igep3_init(void) igep3_i2c_init(); platform_add_devices(igep3_devices, ARRAY_SIZE(igep3_devices)); omap_serial_init(); - usb_musb_init(&musb_board_data); + usb_musb_init(NULL); usbhs_init(&usbhs_bdata); igep3_flash_init(); diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c index 7482c75..f7d6038 100644 --- a/arch/arm/mach-omap2/board-ldp.c +++ b/arch/arm/mach-omap2/board-ldp.c @@ -294,12 +294,6 @@ static struct omap_board_mux board_mux[] __initdata = { }; #endif -static struct omap_musb_board_data musb_board_data = { - .interface_type = MUSB_INTERFACE_ULPI, - .mode = MUSB_OTG, - .power = 100, -}; - static struct mtd_partition ldp_nand_partitions[] = { /* All the partition sizes are listed in terms of NAND block size */ { @@ -342,7 +336,7 @@ static void __init omap_ldp_init(void) platform_add_devices(ldp_devices, ARRAY_SIZE(ldp_devices)); omap_ads7846_init(1, 54, 310, NULL); omap_serial_init(); - usb_musb_init(&musb_board_data); + usb_musb_init(NULL); board_nand_init(ldp_nand_partitions, ARRAY_SIZE(ldp_nand_partitions), ZOOM_NAND_CS, 0); diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c index ce3bc2d..bc30ab0 100644 --- a/arch/arm/mach-omap2/board-omap3beagle.c +++ b/arch/arm/mach-omap2/board-omap3beagle.c @@ -551,12 +551,6 @@ static struct omap_board_mux board_mux[] __initdata = { }; #endif -static struct omap_musb_board_data musb_board_data = { - .interface_type = MUSB_INTERFACE_ULPI, - .mode = MUSB_OTG, - .power = 100, -}; - static void __init beagle_opp_init(void) { int r = 0; @@ -618,7 +612,7 @@ static void __init omap3_beagle_init(void) /* REVISIT leave DVI powered down until it's needed ... */ gpio_direction_output(170, true); - usb_musb_init(&musb_board_data); + usb_musb_init(NULL); usbhs_init(&usbhs_bdata); omap_nand_flash_init(NAND_BUSWIDTH_16, omap3beagle_nand_partitions, ARRAY_SIZE(omap3beagle_nand_partitions)); diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c index b99cc64..6c22d3f 100644 --- a/arch/arm/mach-omap2/board-omap3pandora.c +++ b/arch/arm/mach-omap2/board-omap3pandora.c @@ -633,12 +633,6 @@ static struct omap_board_mux board_mux[] __initdata = { }; #endif -static struct omap_musb_board_data musb_board_data = { - .interface_type = MUSB_INTERFACE_ULPI, - .mode = MUSB_OTG, - .power = 100, -}; - static void __init omap3pandora_init(void) { omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); @@ -652,7 +646,7 @@ static void __init omap3pandora_init(void) ARRAY_SIZE(omap3pandora_spi_board_info)); omap_ads7846_init(1, OMAP3_PANDORA_TS_GPIO, 0, NULL); usbhs_init(&usbhs_bdata); - usb_musb_init(&musb_board_data); + usb_musb_init(NULL); gpmc_nand_init(&pandora_nand_data); /* Ensure SDRC pins are mux'd for self-refresh */ diff --git a/arch/arm/mach-omap2/board-omap3stalker.c b/arch/arm/mach-omap2/board-omap3stalker.c index a1d550f..9981d06 100644 --- a/arch/arm/mach-omap2/board-omap3stalker.c +++ b/arch/arm/mach-omap2/board-omap3stalker.c @@ -526,12 +526,6 @@ static struct omap_board_mux board_mux[] __initdata = { }; #endif -static struct omap_musb_board_data musb_board_data = { - .interface_type = MUSB_INTERFACE_ULPI, - .mode = MUSB_OTG, - .power = 100, -}; - static void __init omap3_stalker_init(void) { omap3_mux_init(board_mux, OMAP_PACKAGE_CUS); @@ -546,7 +540,7 @@ static void __init omap3_stalker_init(void) omap_display_init(&omap3_stalker_dss_data); omap_serial_init(); - usb_musb_init(&musb_board_data); + usb_musb_init(NULL); usbhs_init(&usbhs_bdata); omap_ads7846_init(1, OMAP3_STALKER_TS_GPIO, 310, NULL); diff --git a/arch/arm/mach-omap2/board-omap3touchbook.c b/arch/arm/mach-omap2/board-omap3touchbook.c index d770802..392278d 100644 --- a/arch/arm/mach-omap2/board-omap3touchbook.c +++ b/arch/arm/mach-omap2/board-omap3touchbook.c @@ -421,12 +421,6 @@ static int __init early_touchbook_revision(char *p) } early_param("tbr", early_touchbook_revision); -static struct omap_musb_board_data musb_board_data = { - .interface_type = MUSB_INTERFACE_ULPI, - .mode = MUSB_OTG, - .power = 100, -}; - static void __init omap3_touchbook_init(void) { omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); @@ -447,7 +441,7 @@ static void __init omap3_touchbook_init(void) /* Touchscreen and accelerometer */ omap_ads7846_init(4, OMAP3_TS_GPIO, 310, &ads7846_pdata); - usb_musb_init(&musb_board_data); + usb_musb_init(NULL); usbhs_init(&usbhs_bdata); omap_nand_flash_init(NAND_BUSWIDTH_16, omap3touchbook_nand_partitions, ARRAY_SIZE(omap3touchbook_nand_partitions)); diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c index 7ad2d7f..e152c13 100644 --- a/arch/arm/mach-omap2/board-overo.c +++ b/arch/arm/mach-omap2/board-overo.c @@ -553,12 +553,6 @@ static struct omap_board_mux board_mux[] __initdata = { }; #endif -static struct omap_musb_board_data musb_board_data = { - .interface_type = MUSB_INTERFACE_ULPI, - .mode = MUSB_OTG, - .power = 100, -}; - static void __init overo_init(void) { omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); @@ -567,7 +561,7 @@ static void __init overo_init(void) omap_serial_init(); omap_nand_flash_init(0, overo_nand_partitions, ARRAY_SIZE(overo_nand_partitions)); - usb_musb_init(&musb_board_data); + usb_musb_init(NULL); usbhs_init(&usbhs_bdata); overo_spi_init(); overo_ads7846_init(); diff --git a/arch/arm/mach-omap2/board-rm680.c b/arch/arm/mach-omap2/board-rm680.c index 8e710ff..42d10b1 100644 --- a/arch/arm/mach-omap2/board-rm680.c +++ b/arch/arm/mach-omap2/board-rm680.c @@ -144,17 +144,11 @@ static struct omap_board_mux board_mux[] __initdata = { }; #endif -static struct omap_musb_board_data rm680_musb_data = { - .interface_type = MUSB_INTERFACE_ULPI, - .mode = MUSB_PERIPHERAL, - .power = 100, -}; - static void __init rm680_init(void) { omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); omap_serial_init(); - usb_musb_init(&rm680_musb_data); + usb_musb_init(NULL); rm680_peripherals_init(); } diff --git a/arch/arm/mach-omap2/board-zoom-peripherals.c b/arch/arm/mach-omap2/board-zoom-peripherals.c index e4870c2..489294a 100644 --- a/arch/arm/mach-omap2/board-zoom-peripherals.c +++ b/arch/arm/mach-omap2/board-zoom-peripherals.c @@ -363,12 +363,6 @@ static int __init omap_i2c_init(void) return 0; } -static struct omap_musb_board_data musb_board_data = { - .interface_type = MUSB_INTERFACE_ULPI, - .mode = MUSB_OTG, - .power = 100, -}; - static void enable_board_wakeup_source(void) { /* T2 interrupt line (keypad) */ @@ -383,7 +377,7 @@ void __init zoom_peripherals_init(void) omap_i2c_init(); platform_device_register(&omap_vwlan_device); - usb_musb_init(&musb_board_data); + usb_musb_init(NULL); enable_board_wakeup_source(); omap_serial_init(); } diff --git a/arch/arm/mach-omap2/usb-musb.c b/arch/arm/mach-omap2/usb-musb.c index 35559f7..dfa5a3c 100644 --- a/arch/arm/mach-omap2/usb-musb.c +++ b/arch/arm/mach-omap2/usb-musb.c @@ -108,7 +108,13 @@ static void usb_musb_mux_init(struct omap_musb_board_data *board_data) } } -void __init usb_musb_init(struct omap_musb_board_data *board_data) +static struct omap_musb_board_data musb_default_board_data = { + .interface_type = MUSB_INTERFACE_ULPI, + .mode = MUSB_OTG, + .power = 100, +}; + +void __init usb_musb_init(struct omap_musb_board_data *musb_board_data) { struct omap_hwmod *oh; struct omap_device *od; @@ -116,6 +122,12 @@ void __init usb_musb_init(struct omap_musb_board_data *board_data) struct device *dev; int bus_id = -1; const char *oh_name, *name; + struct omap_musb_board_data *board_data; + + if (musb_board_data) + board_data = musb_board_data; + else + board_data = &musb_default_board_data; if (cpu_is_omap3517() || cpu_is_omap3505()) { } else if (cpu_is_omap44xx()) { -- cgit v0.10.2 From bc593f5d787d0a015539e21868302fb44a47c3e3 Mon Sep 17 00:00:00 2001 From: Igor Grinberg Date: Tue, 3 May 2011 18:22:09 +0300 Subject: arm: omap2plus: GPIO cleanup use gpio_request_() instead of multiple gpiolib calls, remove unneeded variables, etc. Signed-off-by: Igor Grinberg Signed-off-by: Tony Lindgren diff --git a/arch/arm/mach-omap2/board-2430sdp.c b/arch/arm/mach-omap2/board-2430sdp.c index a8810f8..d54969b 100644 --- a/arch/arm/mach-omap2/board-2430sdp.c +++ b/arch/arm/mach-omap2/board-2430sdp.c @@ -226,8 +226,6 @@ static struct omap_board_mux board_mux[] __initdata = { static void __init omap_2430sdp_init(void) { - int ret; - omap2430_mux_init(board_mux, OMAP_PACKAGE_ZAC); omap_board_config = sdp2430_config; @@ -246,9 +244,8 @@ static void __init omap_2430sdp_init(void) board_smc91x_init(); /* Turn off secondary LCD backlight */ - ret = gpio_request(SECONDARY_LCD_GPIO, "Secondary LCD backlight"); - if (ret == 0) - gpio_direction_output(SECONDARY_LCD_GPIO, 0); + gpio_request_one(SECONDARY_LCD_GPIO, GPIOF_OUT_INIT_LOW, + "Secondary LCD backlight"); } static void __init omap_2430sdp_map_io(void) diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c index 951e585..99218a5 100644 --- a/arch/arm/mach-omap2/board-3430sdp.c +++ b/arch/arm/mach-omap2/board-3430sdp.c @@ -126,8 +126,11 @@ static struct twl4030_keypad_data sdp3430_kp_data = { #define SDP3430_LCD_PANEL_BACKLIGHT_GPIO 8 #define SDP3430_LCD_PANEL_ENABLE_GPIO 5 -static unsigned backlight_gpio; -static unsigned enable_gpio; +static struct gpio sdp3430_dss_gpios[] __initdata = { + {SDP3430_LCD_PANEL_ENABLE_GPIO, GPIOF_OUT_INIT_LOW, "LCD reset" }, + {SDP3430_LCD_PANEL_BACKLIGHT_GPIO, GPIOF_OUT_INIT_LOW, "LCD Backlight"}, +}; + static int lcd_enabled; static int dvi_enabled; @@ -135,29 +138,11 @@ static void __init sdp3430_display_init(void) { int r; - enable_gpio = SDP3430_LCD_PANEL_ENABLE_GPIO; - backlight_gpio = SDP3430_LCD_PANEL_BACKLIGHT_GPIO; - - r = gpio_request(enable_gpio, "LCD reset"); - if (r) { - printk(KERN_ERR "failed to get LCD reset GPIO\n"); - goto err0; - } - - r = gpio_request(backlight_gpio, "LCD Backlight"); - if (r) { - printk(KERN_ERR "failed to get LCD backlight GPIO\n"); - goto err1; - } - - gpio_direction_output(enable_gpio, 0); - gpio_direction_output(backlight_gpio, 0); + r = gpio_request_array(sdp3430_dss_gpios, + ARRAY_SIZE(sdp3430_dss_gpios)); + if (r) + printk(KERN_ERR "failed to get LCD control GPIOs\n"); - return; -err1: - gpio_free(enable_gpio); -err0: - return; } static int sdp3430_panel_enable_lcd(struct omap_dss_device *dssdev) @@ -167,8 +152,8 @@ static int sdp3430_panel_enable_lcd(struct omap_dss_device *dssdev) return -EINVAL; } - gpio_direction_output(enable_gpio, 1); - gpio_direction_output(backlight_gpio, 1); + gpio_direction_output(SDP3430_LCD_PANEL_ENABLE_GPIO, 1); + gpio_direction_output(SDP3430_LCD_PANEL_BACKLIGHT_GPIO, 1); lcd_enabled = 1; @@ -179,8 +164,8 @@ static void sdp3430_panel_disable_lcd(struct omap_dss_device *dssdev) { lcd_enabled = 0; - gpio_direction_output(enable_gpio, 0); - gpio_direction_output(backlight_gpio, 0); + gpio_direction_output(SDP3430_LCD_PANEL_ENABLE_GPIO, 0); + gpio_direction_output(SDP3430_LCD_PANEL_BACKLIGHT_GPIO, 0); } static int sdp3430_panel_enable_dvi(struct omap_dss_device *dssdev) @@ -308,12 +293,10 @@ static int sdp3430_twl_gpio_setup(struct device *dev, omap2_hsmmc_init(mmc); /* gpio + 7 is "sub_lcd_en_bkl" (output/PWM1) */ - gpio_request(gpio + 7, "sub_lcd_en_bkl"); - gpio_direction_output(gpio + 7, 0); + gpio_request_one(gpio + 7, GPIOF_OUT_INIT_LOW, "sub_lcd_en_bkl"); /* gpio + 15 is "sub_lcd_nRST" (output) */ - gpio_request(gpio + 15, "sub_lcd_nRST"); - gpio_direction_output(gpio + 15, 0); + gpio_request_one(gpio + 15, GPIOF_OUT_INIT_LOW, "sub_lcd_nRST"); return 0; } diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c index 7073542..ae3153c5 100644 --- a/arch/arm/mach-omap2/board-4430sdp.c +++ b/arch/arm/mach-omap2/board-4430sdp.c @@ -252,58 +252,22 @@ static struct spi_board_info sdp4430_spi_board_info[] __initdata = { }, }; +static struct gpio sdp4430_eth_gpios[] __initdata = { + { ETH_KS8851_POWER_ON, GPIOF_OUT_INIT_HIGH, "eth_power" }, + { ETH_KS8851_QUART, GPIOF_OUT_INIT_HIGH, "quart" }, + { ETH_KS8851_IRQ, GPIOF_IN, "eth_irq" }, +}; + static int omap_ethernet_init(void) { int status; /* Request of GPIO lines */ + status = gpio_request_array(sdp4430_eth_gpios, + ARRAY_SIZE(sdp4430_eth_gpios)); + if (status) + pr_err("Cannot request ETH GPIOs\n"); - status = gpio_request(ETH_KS8851_POWER_ON, "eth_power"); - if (status) { - pr_err("Cannot request GPIO %d\n", ETH_KS8851_POWER_ON); - return status; - } - - status = gpio_request(ETH_KS8851_QUART, "quart"); - if (status) { - pr_err("Cannot request GPIO %d\n", ETH_KS8851_QUART); - goto error1; - } - - status = gpio_request(ETH_KS8851_IRQ, "eth_irq"); - if (status) { - pr_err("Cannot request GPIO %d\n", ETH_KS8851_IRQ); - goto error2; - } - - /* Configuration of requested GPIO lines */ - - status = gpio_direction_output(ETH_KS8851_POWER_ON, 1); - if (status) { - pr_err("Cannot set output GPIO %d\n", ETH_KS8851_IRQ); - goto error3; - } - - status = gpio_direction_output(ETH_KS8851_QUART, 1); - if (status) { - pr_err("Cannot set output GPIO %d\n", ETH_KS8851_QUART); - goto error3; - } - - status = gpio_direction_input(ETH_KS8851_IRQ); - if (status) { - pr_err("Cannot set input GPIO %d\n", ETH_KS8851_IRQ); - goto error3; - } - - return 0; - -error3: - gpio_free(ETH_KS8851_IRQ); -error2: - gpio_free(ETH_KS8851_QUART); -error1: - gpio_free(ETH_KS8851_POWER_ON); return status; } @@ -602,21 +566,13 @@ static int __init omap4_i2c_init(void) static void __init omap_sfh7741prox_init(void) { - int error; + int error; - error = gpio_request(OMAP4_SFH7741_ENABLE_GPIO, "sfh7741"); - if (error < 0) { + error = gpio_request_one(OMAP4_SFH7741_ENABLE_GPIO, + GPIOF_OUT_INIT_LOW, "sfh7741"); + if (error < 0) pr_err("%s:failed to request GPIO %d, error %d\n", __func__, OMAP4_SFH7741_ENABLE_GPIO, error); - return; - } - - error = gpio_direction_output(OMAP4_SFH7741_ENABLE_GPIO , 0); - if (error < 0) { - pr_err("%s: GPIO configuration failed: GPIO %d,error %d\n", - __func__, OMAP4_SFH7741_ENABLE_GPIO, error); - gpio_free(OMAP4_SFH7741_ENABLE_GPIO); - } } static void sdp4430_hdmi_mux_init(void) @@ -633,27 +589,19 @@ static void sdp4430_hdmi_mux_init(void) OMAP_PIN_INPUT_PULLUP); } +static struct gpio sdp4430_hdmi_gpios[] = { + { HDMI_GPIO_HPD, GPIOF_OUT_INIT_HIGH, "hdmi_gpio_hpd" }, + { HDMI_GPIO_LS_OE, GPIOF_OUT_INIT_HIGH, "hdmi_gpio_ls_oe" }, +}; + static int sdp4430_panel_enable_hdmi(struct omap_dss_device *dssdev) { int status; - status = gpio_request_one(HDMI_GPIO_HPD, GPIOF_OUT_INIT_HIGH, - "hdmi_gpio_hpd"); - if (status) { - pr_err("Cannot request GPIO %d\n", HDMI_GPIO_HPD); - return status; - } - status = gpio_request_one(HDMI_GPIO_LS_OE, GPIOF_OUT_INIT_HIGH, - "hdmi_gpio_ls_oe"); - if (status) { - pr_err("Cannot request GPIO %d\n", HDMI_GPIO_LS_OE); - goto error1; - } - - return 0; - -error1: - gpio_free(HDMI_GPIO_HPD); + status = gpio_request_array(sdp4430_hdmi_gpios, + ARRAY_SIZE(sdp4430_hdmi_gpios)); + if (status) + pr_err("%s: Cannot request HDMI GPIOs\n", __func__); return status; } diff --git a/arch/arm/mach-omap2/board-am3517crane.c b/arch/arm/mach-omap2/board-am3517crane.c index a890d24..5e438a7 100644 --- a/arch/arm/mach-omap2/board-am3517crane.c +++ b/arch/arm/mach-omap2/board-am3517crane.c @@ -89,19 +89,13 @@ static void __init am3517_crane_init(void) return; } - ret = gpio_request(GPIO_USB_POWER, "usb_ehci_enable"); + ret = gpio_request_one(GPIO_USB_POWER, GPIOF_OUT_INIT_HIGH, + "usb_ehci_enable"); if (ret < 0) { pr_err("Can not request GPIO %d\n", GPIO_USB_POWER); return; } - ret = gpio_direction_output(GPIO_USB_POWER, 1); - if (ret < 0) { - gpio_free(GPIO_USB_POWER); - pr_err("Unable to initialize EHCI power\n"); - return; - } - usbhs_init(&usbhs_bdata); } diff --git a/arch/arm/mach-omap2/board-am3517evm.c b/arch/arm/mach-omap2/board-am3517evm.c index ce7d5e6..6c47060 100644 --- a/arch/arm/mach-omap2/board-am3517evm.c +++ b/arch/arm/mach-omap2/board-am3517evm.c @@ -174,19 +174,14 @@ static void __init am3517_evm_rtc_init(void) int r; omap_mux_init_gpio(GPIO_RTCS35390A_IRQ, OMAP_PIN_INPUT_PULLUP); - r = gpio_request(GPIO_RTCS35390A_IRQ, "rtcs35390a-irq"); + + r = gpio_request_one(GPIO_RTCS35390A_IRQ, GPIOF_IN, "rtcs35390a-irq"); if (r < 0) { printk(KERN_WARNING "failed to request GPIO#%d\n", GPIO_RTCS35390A_IRQ); return; } - r = gpio_direction_input(GPIO_RTCS35390A_IRQ); - if (r < 0) { - printk(KERN_WARNING "GPIO#%d cannot be configured as input\n", - GPIO_RTCS35390A_IRQ); - gpio_free(GPIO_RTCS35390A_IRQ); - return; - } + am3517evm_i2c1_boardinfo[0].irq = gpio_to_irq(GPIO_RTCS35390A_IRQ); } @@ -242,6 +237,15 @@ static int dvi_enabled; #if defined(CONFIG_PANEL_SHARP_LQ043T1DG01) || \ defined(CONFIG_PANEL_SHARP_LQ043T1DG01_MODULE) +static struct gpio am3517_evm_dss_gpios[] __initdata = { + /* GPIO 182 = LCD Backlight Power */ + { LCD_PANEL_BKLIGHT_PWR, GPIOF_OUT_INIT_HIGH, "lcd_backlight_pwr" }, + /* GPIO 181 = LCD Panel PWM */ + { LCD_PANEL_PWM, GPIOF_OUT_INIT_HIGH, "lcd bl enable" }, + /* GPIO 176 = LCD Panel Power enable pin */ + { LCD_PANEL_PWR, GPIOF_OUT_INIT_HIGH, "dvi enable" }, +}; + static void __init am3517_evm_display_init(void) { int r; @@ -249,41 +253,15 @@ static void __init am3517_evm_display_init(void) omap_mux_init_gpio(LCD_PANEL_PWR, OMAP_PIN_INPUT_PULLUP); omap_mux_init_gpio(LCD_PANEL_BKLIGHT_PWR, OMAP_PIN_INPUT_PULLDOWN); omap_mux_init_gpio(LCD_PANEL_PWM, OMAP_PIN_INPUT_PULLDOWN); - /* - * Enable GPIO 182 = LCD Backlight Power - */ - r = gpio_request(LCD_PANEL_BKLIGHT_PWR, "lcd_backlight_pwr"); + + r = gpio_request_array(am3517_evm_dss_gpios, + ARRAY_SIZE(am3517_evm_dss_gpios)); if (r) { - printk(KERN_ERR "failed to get lcd_backlight_pwr\n"); + printk(KERN_ERR "failed to get DSS panel control GPIOs\n"); return; } - gpio_direction_output(LCD_PANEL_BKLIGHT_PWR, 1); - /* - * Enable GPIO 181 = LCD Panel PWM - */ - r = gpio_request(LCD_PANEL_PWM, "lcd_pwm"); - if (r) { - printk(KERN_ERR "failed to get lcd_pwm\n"); - goto err_1; - } - gpio_direction_output(LCD_PANEL_PWM, 1); - /* - * Enable GPIO 176 = LCD Panel Power enable pin - */ - r = gpio_request(LCD_PANEL_PWR, "lcd_panel_pwr"); - if (r) { - printk(KERN_ERR "failed to get lcd_panel_pwr\n"); - goto err_2; - } - gpio_direction_output(LCD_PANEL_PWR, 1); printk(KERN_INFO "Display initialized successfully\n"); - return; - -err_2: - gpio_free(LCD_PANEL_PWM); -err_1: - gpio_free(LCD_PANEL_BKLIGHT_PWR); } #else static void __init am3517_evm_display_init(void) {} diff --git a/arch/arm/mach-omap2/board-apollon.c b/arch/arm/mach-omap2/board-apollon.c index f4f8374..f3beb8e 100644 --- a/arch/arm/mach-omap2/board-apollon.c +++ b/arch/arm/mach-omap2/board-apollon.c @@ -202,6 +202,7 @@ static inline void __init apollon_init_smc91x(void) unsigned int rate; struct clk *gpmc_fck; int eth_cs; + int err; gpmc_fck = clk_get(NULL, "gpmc_fck"); /* Always on ENABLE_ON_INIT */ if (IS_ERR(gpmc_fck)) { @@ -245,15 +246,13 @@ static inline void __init apollon_init_smc91x(void) apollon_smc91x_resources[0].end = base + 0x30f; udelay(100); - omap_mux_init_gpio(74, 0); - if (gpio_request(APOLLON_ETHR_GPIO_IRQ, "SMC91x irq") < 0) { + omap_mux_init_gpio(APOLLON_ETHR_GPIO_IRQ, 0); + err = gpio_request_one(APOLLON_ETHR_GPIO_IRQ, GPIOF_IN, "SMC91x irq"); + if (err) { printk(KERN_ERR "Failed to request GPIO%d for smc91x IRQ\n", APOLLON_ETHR_GPIO_IRQ); gpmc_cs_free(APOLLON_ETH_CS); - goto out; } - gpio_direction_input(APOLLON_ETHR_GPIO_IRQ); - out: clk_disable(gpmc_fck); clk_put(gpmc_fck); @@ -280,20 +279,19 @@ static void __init omap_apollon_init_early(void) omap2_init_common_devices(NULL, NULL); } +static struct gpio apollon_gpio_leds[] __initdata = { + { LED0_GPIO13, GPIOF_OUT_INIT_LOW, "LED0" }, /* LED0 - AA10 */ + { LED1_GPIO14, GPIOF_OUT_INIT_LOW, "LED1" }, /* LED1 - AA6 */ + { LED2_GPIO15, GPIOF_OUT_INIT_LOW, "LED2" }, /* LED2 - AA4 */ +}; + static void __init apollon_led_init(void) { - /* LED0 - AA10 */ omap_mux_init_signal("vlynq_clk.gpio_13", 0); - gpio_request(LED0_GPIO13, "LED0"); - gpio_direction_output(LED0_GPIO13, 0); - /* LED1 - AA6 */ omap_mux_init_signal("vlynq_rx1.gpio_14", 0); - gpio_request(LED1_GPIO14, "LED1"); - gpio_direction_output(LED1_GPIO14, 0); - /* LED2 - AA4 */ omap_mux_init_signal("vlynq_rx0.gpio_15", 0); - gpio_request(LED2_GPIO15, "LED2"); - gpio_direction_output(LED2_GPIO15, 0); + + gpio_request_array(apollon_gpio_leds, ARRAY_SIZE(apollon_gpio_leds)); } static void __init apollon_usb_init(void) @@ -301,8 +299,7 @@ static void __init apollon_usb_init(void) /* USB device */ /* DEVICE_SUSPEND */ omap_mux_init_signal("mcbsp2_clkx.gpio_12", 0); - gpio_request(12, "USB suspend"); - gpio_direction_output(12, 0); + gpio_request_one(12, GPIOF_OUT_INIT_LOW, "USB suspend"); omap2_usbfs_init(&apollon_usb_config); } diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c index e0e2d48..6063be8 100644 --- a/arch/arm/mach-omap2/board-cm-t35.c +++ b/arch/arm/mach-omap2/board-cm-t35.c @@ -182,10 +182,6 @@ static inline void cm_t35_init_nand(void) {} #define CM_T35_LCD_BL_GPIO 58 #define CM_T35_DVI_EN_GPIO 54 -static int lcd_bl_gpio; -static int lcd_en_gpio; -static int dvi_en_gpio; - static int lcd_enabled; static int dvi_enabled; @@ -196,8 +192,8 @@ static int cm_t35_panel_enable_lcd(struct omap_dss_device *dssdev) return -EINVAL; } - gpio_set_value(lcd_en_gpio, 1); - gpio_set_value(lcd_bl_gpio, 1); + gpio_set_value(CM_T35_LCD_EN_GPIO, 1); + gpio_set_value(CM_T35_LCD_BL_GPIO, 1); lcd_enabled = 1; @@ -208,8 +204,8 @@ static void cm_t35_panel_disable_lcd(struct omap_dss_device *dssdev) { lcd_enabled = 0; - gpio_set_value(lcd_bl_gpio, 0); - gpio_set_value(lcd_en_gpio, 0); + gpio_set_value(CM_T35_LCD_BL_GPIO, 0); + gpio_set_value(CM_T35_LCD_EN_GPIO, 0); } static int cm_t35_panel_enable_dvi(struct omap_dss_device *dssdev) @@ -219,7 +215,7 @@ static int cm_t35_panel_enable_dvi(struct omap_dss_device *dssdev) return -EINVAL; } - gpio_set_value(dvi_en_gpio, 0); + gpio_set_value(CM_T35_DVI_EN_GPIO, 0); dvi_enabled = 1; return 0; @@ -227,7 +223,7 @@ static int cm_t35_panel_enable_dvi(struct omap_dss_device *dssdev) static void cm_t35_panel_disable_dvi(struct omap_dss_device *dssdev) { - gpio_set_value(dvi_en_gpio, 1); + gpio_set_value(CM_T35_DVI_EN_GPIO, 1); dvi_enabled = 0; } @@ -309,62 +305,38 @@ static struct spi_board_info cm_t35_lcd_spi_board_info[] __initdata = { }, }; +static struct gpio cm_t35_dss_gpios[] __initdata = { + { CM_T35_LCD_EN_GPIO, GPIOF_OUT_INIT_LOW, "lcd enable" }, + { CM_T35_LCD_BL_GPIO, GPIOF_OUT_INIT_LOW, "lcd bl enable" }, + { CM_T35_DVI_EN_GPIO, GPIOF_OUT_INIT_HIGH, "dvi enable" }, +}; + static void __init cm_t35_init_display(void) { int err; - lcd_en_gpio = CM_T35_LCD_EN_GPIO; - lcd_bl_gpio = CM_T35_LCD_BL_GPIO; - dvi_en_gpio = CM_T35_DVI_EN_GPIO; - spi_register_board_info(cm_t35_lcd_spi_board_info, ARRAY_SIZE(cm_t35_lcd_spi_board_info)); - err = gpio_request(lcd_en_gpio, "LCD RST"); - if (err) { - pr_err("CM-T35: failed to get LCD reset GPIO\n"); - goto out; - } - - err = gpio_request(lcd_bl_gpio, "LCD BL"); + err = gpio_request_array(cm_t35_dss_gpios, + ARRAY_SIZE(cm_t35_dss_gpios)); if (err) { - pr_err("CM-T35: failed to get LCD backlight control GPIO\n"); - goto err_lcd_bl; + pr_err("CM-T35: failed to request DSS control GPIOs\n"); + return; } - err = gpio_request(dvi_en_gpio, "DVI EN"); - if (err) { - pr_err("CM-T35: failed to get DVI reset GPIO\n"); - goto err_dvi_en; - } - - gpio_export(lcd_en_gpio, 0); - gpio_export(lcd_bl_gpio, 0); - gpio_export(dvi_en_gpio, 0); - gpio_direction_output(lcd_en_gpio, 0); - gpio_direction_output(lcd_bl_gpio, 0); - gpio_direction_output(dvi_en_gpio, 1); + gpio_export(CM_T35_LCD_EN_GPIO, 0); + gpio_export(CM_T35_LCD_BL_GPIO, 0); + gpio_export(CM_T35_DVI_EN_GPIO, 0); msleep(50); - gpio_set_value(lcd_en_gpio, 1); + gpio_set_value(CM_T35_LCD_EN_GPIO, 1); err = omap_display_init(&cm_t35_dss_data); if (err) { pr_err("CM-T35: failed to register DSS device\n"); - goto err_dev_reg; + gpio_free_array(cm_t35_dss_gpios, ARRAY_SIZE(cm_t35_dss_gpios)); } - - return; - -err_dev_reg: - gpio_free(dvi_en_gpio); -err_dvi_en: - gpio_free(lcd_bl_gpio); -err_lcd_bl: - gpio_free(lcd_en_gpio); -out: - - return; } static struct regulator_consumer_supply cm_t35_vmmc1_supply = { @@ -497,10 +469,8 @@ static int cm_t35_twl_gpio_setup(struct device *dev, unsigned gpio, { int wlan_rst = gpio + 2; - if ((gpio_request(wlan_rst, "WLAN RST") == 0) && - (gpio_direction_output(wlan_rst, 1) == 0)) { + if (gpio_request_one(wlan_rst, GPIOF_OUT_INIT_HIGH, "WLAN RST") == 0) { gpio_export(wlan_rst, 0); - udelay(10); gpio_set_value(wlan_rst, 0); udelay(10); diff --git a/arch/arm/mach-omap2/board-cm-t3517.c b/arch/arm/mach-omap2/board-cm-t3517.c index a27e3ee..08f08e8 100644 --- a/arch/arm/mach-omap2/board-cm-t3517.c +++ b/arch/arm/mach-omap2/board-cm-t3517.c @@ -148,14 +148,13 @@ static void __init cm_t3517_init_rtc(void) { int err; - err = gpio_request(RTC_CS_EN_GPIO, "rtc cs en"); + err = gpio_request_one(RTC_CS_EN_GPIO, GPIOF_OUT_INIT_HIGH, + "rtc cs en"); if (err) { pr_err("CM-T3517: rtc cs en gpio request failed: %d\n", err); return; } - gpio_direction_output(RTC_CS_EN_GPIO, 1); - platform_device_register(&cm_t3517_rtc_device); } #else @@ -182,11 +181,11 @@ static int cm_t3517_init_usbh(void) { int err; - err = gpio_request(USB_HUB_RESET_GPIO, "usb hub rst"); + err = gpio_request_one(USB_HUB_RESET_GPIO, GPIOF_OUT_INIT_LOW, + "usb hub rst"); if (err) { pr_err("CM-T3517: usb hub rst gpio request failed: %d\n", err); } else { - gpio_direction_output(USB_HUB_RESET_GPIO, 0); udelay(10); gpio_set_value(USB_HUB_RESET_GPIO, 1); msleep(1); diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c index 405542a..3bd344a 100644 --- a/arch/arm/mach-omap2/board-devkit8000.c +++ b/arch/arm/mach-omap2/board-devkit8000.c @@ -242,7 +242,7 @@ static int devkit8000_twl_gpio_setup(struct device *dev, /* TWL4030_GPIO_MAX + 0 is "LCD_PWREN" (out, active high) */ devkit8000_lcd_device.reset_gpio = gpio + TWL4030_GPIO_MAX + 0; ret = gpio_request_one(devkit8000_lcd_device.reset_gpio, - GPIOF_DIR_OUT | GPIOF_INIT_LOW, "LCD_PWREN"); + GPIOF_OUT_INIT_LOW, "LCD_PWREN"); if (ret < 0) { devkit8000_lcd_device.reset_gpio = -EINVAL; printk(KERN_ERR "Failed to request GPIO for LCD_PWRN\n"); @@ -251,7 +251,7 @@ static int devkit8000_twl_gpio_setup(struct device *dev, /* gpio + 7 is "DVI_PD" (out, active low) */ devkit8000_dvi_device.reset_gpio = gpio + 7; ret = gpio_request_one(devkit8000_dvi_device.reset_gpio, - GPIOF_DIR_OUT | GPIOF_INIT_LOW, "DVI PowerDown"); + GPIOF_OUT_INIT_LOW, "DVI PowerDown"); if (ret < 0) { devkit8000_dvi_device.reset_gpio = -EINVAL; printk(KERN_ERR "Failed to request GPIO for DVI PowerDown\n"); @@ -483,14 +483,14 @@ static void __init omap_dm9000_init(void) { unsigned char *eth_addr = omap_dm9000_platdata.dev_addr; struct omap_die_id odi; + int ret; - if (gpio_request(OMAP_DM9000_GPIO_IRQ, "dm9000 irq") < 0) { + ret = gpio_request_one(OMAP_DM9000_GPIO_IRQ, GPIOF_IN, "dm9000 irq"); + if (ret < 0) { printk(KERN_ERR "Failed to request GPIO%d for dm9000 IRQ\n", OMAP_DM9000_GPIO_IRQ); return; - } - - gpio_direction_input(OMAP_DM9000_GPIO_IRQ); + } /* init the mac address using DIE id */ omap_get_die_id(&odi); diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c index 2c9a919..c62c297 100644 --- a/arch/arm/mach-omap2/board-igep0020.c +++ b/arch/arm/mach-omap2/board-igep0020.c @@ -78,22 +78,22 @@ static void __init igep2_get_revision(void) omap_mux_init_gpio(IGEP2_GPIO_LED1_RED, OMAP_PIN_INPUT); - if ((gpio_request(IGEP2_GPIO_LED1_RED, "GPIO_HW0_REV") == 0) && - (gpio_direction_input(IGEP2_GPIO_LED1_RED) == 0)) { - ret = gpio_get_value(IGEP2_GPIO_LED1_RED); - if (ret == 0) { - pr_info("IGEP2: Hardware Revision C (B-NON compatible)\n"); - hwrev = IGEP2_BOARD_HWREV_C; - } else if (ret == 1) { - pr_info("IGEP2: Hardware Revision B/C (B compatible)\n"); - hwrev = IGEP2_BOARD_HWREV_B; - } else { - pr_err("IGEP2: Unknown Hardware Revision\n"); - hwrev = -1; - } - } else { + if (gpio_request_one(IGEP2_GPIO_LED1_RED, GPIOF_IN, "GPIO_HW0_REV")) { pr_warning("IGEP2: Could not obtain gpio GPIO_HW0_REV\n"); pr_err("IGEP2: Unknown Hardware Revision\n"); + return; + } + + ret = gpio_get_value(IGEP2_GPIO_LED1_RED); + if (ret == 0) { + pr_info("IGEP2: Hardware Revision C (B-NON compatible)\n"); + hwrev = IGEP2_BOARD_HWREV_C; + } else if (ret == 1) { + pr_info("IGEP2: Hardware Revision B/C (B compatible)\n"); + hwrev = IGEP2_BOARD_HWREV_B; + } else { + pr_err("IGEP2: Unknown Hardware Revision\n"); + hwrev = -1; } gpio_free(IGEP2_GPIO_LED1_RED); @@ -339,32 +339,35 @@ static void __init igep2_leds_init(void) } #else +static struct gpio igep2_gpio_leds[] __initdata = { + { IGEP2_GPIO_LED0_RED, GPIOF_OUT_INIT_LOW, "gpio-led:red:d0" }, + { IGEP2_GPIO_LED0_GREEN, GPIOF_OUT_INIT_LOW, "gpio-led:green:d0" }, + { IGEP2_GPIO_LED1_RED, GPIOF_OUT_INIT_LOW, "gpio-led:red:d1" }, +}; + static inline void igep2_leds_init(void) { - if ((gpio_request(IGEP2_GPIO_LED0_RED, "gpio-led:red:d0") == 0) && - (gpio_direction_output(IGEP2_GPIO_LED0_RED, 0) == 0)) - gpio_export(IGEP2_GPIO_LED0_RED, 0); - else - pr_warning("IGEP v2: Could not obtain gpio GPIO_LED0_RED\n"); - - if ((gpio_request(IGEP2_GPIO_LED0_GREEN, "gpio-led:green:d0") == 0) && - (gpio_direction_output(IGEP2_GPIO_LED0_GREEN, 0) == 0)) - gpio_export(IGEP2_GPIO_LED0_GREEN, 0); - else - pr_warning("IGEP v2: Could not obtain gpio GPIO_LED0_GREEN\n"); - - if ((gpio_request(IGEP2_GPIO_LED1_RED, "gpio-led:red:d1") == 0) && - (gpio_direction_output(IGEP2_GPIO_LED1_RED, 0) == 0)) - gpio_export(IGEP2_GPIO_LED1_RED, 0); - else - pr_warning("IGEP v2: Could not obtain gpio GPIO_LED1_RED\n"); + if (gpio_request_array(igep2_gpio_leds, ARRAY_SIZE(igep2_gpio_leds))) { + pr_warning("IGEP v2: Could not obtain leds gpios\n"); + return; + } + gpio_export(IGEP2_GPIO_LED0_RED, 0); + gpio_export(IGEP2_GPIO_LED0_GREEN, 0); + gpio_export(IGEP2_GPIO_LED1_RED, 0); } #endif +static struct gpio igep2_twl_gpios[] = { + { -EINVAL, GPIOF_IN, "GPIO_EHCI_NOC" }, + { -EINVAL, GPIOF_OUT_INIT_LOW, "GPIO_USBH_CPEN" }, +}; + static int igep2_twl_gpio_setup(struct device *dev, unsigned gpio, unsigned ngpio) { + int ret; + /* gpio + 0 is "mmc0_cd" (input/IRQ) */ mmc[0].gpio_cd = gpio + 0; omap2_hsmmc_init(mmc); @@ -373,22 +376,20 @@ static int igep2_twl_gpio_setup(struct device *dev, * REVISIT: need ehci-omap hooks for external VBUS * power switch and overcurrent detect */ - if ((gpio_request(gpio + 1, "GPIO_EHCI_NOC") < 0) || - (gpio_direction_input(gpio + 1) < 0)) - pr_err("IGEP2: Could not obtain gpio for EHCI NOC"); + igep2_twl_gpios[0].gpio = gpio + 1; - /* - * TWL4030_GPIO_MAX + 0 == ledA, GPIO_USBH_CPEN - * (out, active low) - */ - if ((gpio_request(gpio + TWL4030_GPIO_MAX, "GPIO_USBH_CPEN") < 0) || - (gpio_direction_output(gpio + TWL4030_GPIO_MAX, 0) < 0)) + /* TWL4030_GPIO_MAX + 0 == ledA, GPIO_USBH_CPEN (out, active low) */ + igep2_twl_gpios[1].gpio = gpio + TWL4030_GPIO_MAX; + + ret = gpio_request_array(igep2_twl_gpios, ARRAY_SIZE(igep2_twl_gpios)); + if (ret < 0) pr_err("IGEP2: Could not obtain gpio for USBH_CPEN"); /* TWL4030_GPIO_MAX + 1 == ledB (out, active low LED) */ #if !defined(CONFIG_LEDS_GPIO) && !defined(CONFIG_LEDS_GPIO_MODULE) - if ((gpio_request(gpio+TWL4030_GPIO_MAX+1, "gpio-led:green:d1") == 0) - && (gpio_direction_output(gpio + TWL4030_GPIO_MAX + 1, 1) == 0)) + ret = gpio_request_one(gpio + TWL4030_GPIO_MAX + 1, GPIOF_OUT_INIT_HIGH, + "gpio-led:green:d1"); + if (ret == 0) gpio_export(gpio + TWL4030_GPIO_MAX + 1, 0); else pr_warning("IGEP v2: Could not obtain gpio GPIO_LED1_GREEN\n"); @@ -469,8 +470,9 @@ static struct regulator_init_data igep2_vpll2 = { static void __init igep2_display_init(void) { - if (gpio_request(IGEP2_GPIO_DVI_PUP, "GPIO_DVI_PUP") && - gpio_direction_output(IGEP2_GPIO_DVI_PUP, 1)) + int err = gpio_request_one(IGEP2_GPIO_DVI_PUP, GPIOF_OUT_INIT_HIGH, + "GPIO_DVI_PUP"); + if (err) pr_err("IGEP v2: Could not obtain gpio GPIO_DVI_PUP\n"); } @@ -577,44 +579,43 @@ static struct omap_board_mux board_mux[] __initdata = { #endif #if defined(CONFIG_LIBERTAS_SDIO) || defined(CONFIG_LIBERTAS_SDIO_MODULE) +static struct gpio igep2_wlan_bt_gpios[] __initdata = { + { -EINVAL, GPIOF_OUT_INIT_HIGH, "GPIO_WIFI_NPD" }, + { -EINVAL, GPIOF_OUT_INIT_HIGH, "GPIO_WIFI_NRESET" }, + { -EINVAL, GPIOF_OUT_INIT_HIGH, "GPIO_BT_NRESET" }, +}; static void __init igep2_wlan_bt_init(void) { - unsigned npd, wreset, btreset; + int err; /* GPIO's for WLAN-BT combo depends on hardware revision */ if (hwrev == IGEP2_BOARD_HWREV_B) { - npd = IGEP2_RB_GPIO_WIFI_NPD; - wreset = IGEP2_RB_GPIO_WIFI_NRESET; - btreset = IGEP2_RB_GPIO_BT_NRESET; + igep2_wlan_bt_gpios[0].gpio = IGEP2_RB_GPIO_WIFI_NPD; + igep2_wlan_bt_gpios[1].gpio = IGEP2_RB_GPIO_WIFI_NRESET; + igep2_wlan_bt_gpios[2].gpio = IGEP2_RB_GPIO_BT_NRESET; } else if (hwrev == IGEP2_BOARD_HWREV_C) { - npd = IGEP2_RC_GPIO_WIFI_NPD; - wreset = IGEP2_RC_GPIO_WIFI_NRESET; - btreset = IGEP2_RC_GPIO_BT_NRESET; + igep2_wlan_bt_gpios[0].gpio = IGEP2_RC_GPIO_WIFI_NPD; + igep2_wlan_bt_gpios[1].gpio = IGEP2_RC_GPIO_WIFI_NRESET; + igep2_wlan_bt_gpios[2].gpio = IGEP2_RC_GPIO_BT_NRESET; } else return; - /* Set GPIO's for WLAN-BT combo module */ - if ((gpio_request(npd, "GPIO_WIFI_NPD") == 0) && - (gpio_direction_output(npd, 1) == 0)) { - gpio_export(npd, 0); - } else - pr_warning("IGEP2: Could not obtain gpio GPIO_WIFI_NPD\n"); - - if ((gpio_request(wreset, "GPIO_WIFI_NRESET") == 0) && - (gpio_direction_output(wreset, 1) == 0)) { - gpio_export(wreset, 0); - gpio_set_value(wreset, 0); - udelay(10); - gpio_set_value(wreset, 1); - } else - pr_warning("IGEP2: Could not obtain gpio GPIO_WIFI_NRESET\n"); + err = gpio_request_array(igep2_wlan_bt_gpios, + ARRAY_SIZE(igep2_wlan_bt_gpios)); + if (err) { + pr_warning("IGEP2: Could not obtain WIFI/BT gpios\n"); + return; + } + + gpio_export(igep2_wlan_bt_gpios[0].gpio, 0); + gpio_export(igep2_wlan_bt_gpios[1].gpio, 0); + gpio_export(igep2_wlan_bt_gpios[2].gpio, 0); + + gpio_set_value(igep2_wlan_bt_gpios[1].gpio, 0); + udelay(10); + gpio_set_value(igep2_wlan_bt_gpios[1].gpio, 1); - if ((gpio_request(btreset, "GPIO_BT_NRESET") == 0) && - (gpio_direction_output(btreset, 1) == 0)) { - gpio_export(btreset, 0); - } else - pr_warning("IGEP2: Could not obtain gpio GPIO_BT_NRESET\n"); } #else static inline void __init igep2_wlan_bt_init(void) { } diff --git a/arch/arm/mach-omap2/board-igep0030.c b/arch/arm/mach-omap2/board-igep0030.c index 512a7eb..83f6be2 100644 --- a/arch/arm/mach-omap2/board-igep0030.c +++ b/arch/arm/mach-omap2/board-igep0030.c @@ -269,49 +269,43 @@ static void __init igep3_leds_init(void) } #else +static struct gpio igep3_gpio_leds[] __initdata = { + { IGEP3_GPIO_LED0_RED, GPIOF_OUT_INIT_HIGH, "gpio-led:red:d0" }, + { IGEP3_GPIO_LED0_GREEN, GPIOF_OUT_INIT_HIGH, "gpio-led:green:d0" }, + { IGEP3_GPIO_LED1_RED, GPIOF_OUT_INIT_HIGH, "gpio-led:red:d1" }, +}; + static inline void igep3_leds_init(void) { - if ((gpio_request(IGEP3_GPIO_LED0_RED, "gpio-led:red:d0") == 0) && - (gpio_direction_output(IGEP3_GPIO_LED0_RED, 1) == 0)) { - gpio_export(IGEP3_GPIO_LED0_RED, 0); - gpio_set_value(IGEP3_GPIO_LED0_RED, 1); - } else - pr_warning("IGEP3: Could not obtain gpio GPIO_LED0_RED\n"); - - if ((gpio_request(IGEP3_GPIO_LED0_GREEN, "gpio-led:green:d0") == 0) && - (gpio_direction_output(IGEP3_GPIO_LED0_GREEN, 1) == 0)) { - gpio_export(IGEP3_GPIO_LED0_GREEN, 0); - gpio_set_value(IGEP3_GPIO_LED0_GREEN, 1); - } else - pr_warning("IGEP3: Could not obtain gpio GPIO_LED0_GREEN\n"); - - if ((gpio_request(IGEP3_GPIO_LED1_RED, "gpio-led:red:d1") == 0) && - (gpio_direction_output(IGEP3_GPIO_LED1_RED, 1) == 0)) { - gpio_export(IGEP3_GPIO_LED1_RED, 0); - gpio_set_value(IGEP3_GPIO_LED1_RED, 1); - } else - pr_warning("IGEP3: Could not obtain gpio GPIO_LED1_RED\n"); + if (gpio_request_array(igep3_gpio_leds, ARRAY_SIZE(igep3_gpio_leds))) { + pr_warning("IGEP3: Could not obtain leds gpios\n"); + return; + } + gpio_export(IGEP3_GPIO_LED0_RED, 0); + gpio_export(IGEP3_GPIO_LED0_GREEN, 0); + gpio_export(IGEP3_GPIO_LED1_RED, 0); } #endif static int igep3_twl4030_gpio_setup(struct device *dev, unsigned gpio, unsigned ngpio) { - /* gpio + 0 is "mmc0_cd" (input/IRQ) */ - mmc[0].gpio_cd = gpio + 0; - omap2_hsmmc_init(mmc); +#if !defined(CONFIG_LEDS_GPIO) && !defined(CONFIG_LEDS_GPIO_MODULE) + int ret; /* TWL4030_GPIO_MAX + 1 == ledB (out, active low LED) */ -#if !defined(CONFIG_LEDS_GPIO) && !defined(CONFIG_LEDS_GPIO_MODULE) - if ((gpio_request(gpio+TWL4030_GPIO_MAX+1, "gpio-led:green:d1") == 0) - && (gpio_direction_output(gpio + TWL4030_GPIO_MAX + 1, 1) == 0)) { - gpio_export(gpio + TWL4030_GPIO_MAX + 1, 0); - gpio_set_value(gpio + TWL4030_GPIO_MAX + 1, 0); - } else + ret = gpio_request_one(gpio + TWL4030_GPIO_MAX + 1, GPIOF_OUT_INIT_HIGH, + "gpio-led:green:d1"); + if (ret) pr_warning("IGEP3: Could not obtain gpio GPIO_LED1_GREEN\n"); + else + gpio_export(gpio + TWL4030_GPIO_MAX + 1, 0); #else igep3_gpio_leds[3].gpio = gpio + TWL4030_GPIO_MAX + 1; #endif + /* gpio + 0 is "mmc0_cd" (input/IRQ) */ + mmc[0].gpio_cd = gpio + 0; + omap2_hsmmc_init(mmc); return 0; }; @@ -358,35 +352,36 @@ static int __init igep3_i2c_init(void) } #if defined(CONFIG_LIBERTAS_SDIO) || defined(CONFIG_LIBERTAS_SDIO_MODULE) +static struct gpio igep3_wlan_bt_gpios[] __initdata = { + { IGEP3_GPIO_WIFI_NPD, GPIOF_OUT_INIT_HIGH, "GPIO_WIFI_NPD" }, + { IGEP3_GPIO_WIFI_NRESET, GPIOF_OUT_INIT_HIGH, "GPIO_WIFI_NRESET" }, + { IGEP3_GPIO_BT_NRESET, GPIOF_OUT_INIT_HIGH, "GPIO_BT_NRESET" }, +}; static void __init igep3_wifi_bt_init(void) { + int err; + /* Configure MUX values for W-LAN + Bluetooth GPIO's */ omap_mux_init_gpio(IGEP3_GPIO_WIFI_NPD, OMAP_PIN_OUTPUT); omap_mux_init_gpio(IGEP3_GPIO_WIFI_NRESET, OMAP_PIN_OUTPUT); omap_mux_init_gpio(IGEP3_GPIO_BT_NRESET, OMAP_PIN_OUTPUT); /* Set GPIO's for W-LAN + Bluetooth combo module */ - if ((gpio_request(IGEP3_GPIO_WIFI_NPD, "GPIO_WIFI_NPD") == 0) && - (gpio_direction_output(IGEP3_GPIO_WIFI_NPD, 1) == 0)) { - gpio_export(IGEP3_GPIO_WIFI_NPD, 0); - } else - pr_warning("IGEP3: Could not obtain gpio GPIO_WIFI_NPD\n"); - - if ((gpio_request(IGEP3_GPIO_WIFI_NRESET, "GPIO_WIFI_NRESET") == 0) && - (gpio_direction_output(IGEP3_GPIO_WIFI_NRESET, 1) == 0)) { - gpio_export(IGEP3_GPIO_WIFI_NRESET, 0); - gpio_set_value(IGEP3_GPIO_WIFI_NRESET, 0); - udelay(10); - gpio_set_value(IGEP3_GPIO_WIFI_NRESET, 1); - } else - pr_warning("IGEP3: Could not obtain gpio GPIO_WIFI_NRESET\n"); - - if ((gpio_request(IGEP3_GPIO_BT_NRESET, "GPIO_BT_NRESET") == 0) && - (gpio_direction_output(IGEP3_GPIO_BT_NRESET, 1) == 0)) { - gpio_export(IGEP3_GPIO_BT_NRESET, 0); - } else - pr_warning("IGEP3: Could not obtain gpio GPIO_BT_NRESET\n"); + err = gpio_request_array(igep3_wlan_bt_gpios, + ARRAY_SIZE(igep3_wlan_bt_gpios)); + if (err) { + pr_warning("IGEP3: Could not obtain WIFI/BT gpios\n"); + return; + } + + gpio_export(IGEP3_GPIO_WIFI_NPD, 0); + gpio_export(IGEP3_GPIO_WIFI_NRESET, 0); + gpio_export(IGEP3_GPIO_BT_NRESET, 0); + + gpio_set_value(IGEP3_GPIO_WIFI_NRESET, 0); + udelay(10); + gpio_set_value(IGEP3_GPIO_WIFI_NRESET, 1); } #else void __init igep3_wifi_bt_init(void) {} diff --git a/arch/arm/mach-omap2/board-n8x0.c b/arch/arm/mach-omap2/board-n8x0.c index e710cd9..8d74318 100644 --- a/arch/arm/mach-omap2/board-n8x0.c +++ b/arch/arm/mach-omap2/board-n8x0.c @@ -106,14 +106,13 @@ static void __init n8x0_usb_init(void) static char announce[] __initdata = KERN_INFO "TUSB 6010\n"; /* PM companion chip power control pin */ - ret = gpio_request(TUSB6010_GPIO_ENABLE, "TUSB6010 enable"); + ret = gpio_request_one(TUSB6010_GPIO_ENABLE, GPIOF_OUT_INIT_LOW, + "TUSB6010 enable"); if (ret != 0) { printk(KERN_ERR "Could not get TUSB power GPIO%i\n", TUSB6010_GPIO_ENABLE); return; } - gpio_direction_output(TUSB6010_GPIO_ENABLE, 0); - tusb_set_power(0); ret = tusb6010_setup_interface(&tusb_data, TUSB6010_REFCLK_19, 2, @@ -494,8 +493,12 @@ static struct omap_mmc_platform_data mmc1_data = { static struct omap_mmc_platform_data *mmc_data[OMAP24XX_NR_MMC]; -static void __init n8x0_mmc_init(void) +static struct gpio n810_emmc_gpios[] __initdata = { + { N810_EMMC_VSD_GPIO, GPIOF_OUT_INIT_LOW, "MMC slot 2 Vddf" }, + { N810_EMMC_VIO_GPIO, GPIOF_OUT_INIT_LOW, "MMC slot 2 Vdd" }, +}; +static void __init n8x0_mmc_init(void) { int err; @@ -512,27 +515,18 @@ static void __init n8x0_mmc_init(void) mmc1_data.slots[1].ban_openended = 1; } - err = gpio_request(N8X0_SLOT_SWITCH_GPIO, "MMC slot switch"); + err = gpio_request_one(N8X0_SLOT_SWITCH_GPIO, GPIOF_OUT_INIT_LOW, + "MMC slot switch"); if (err) return; - gpio_direction_output(N8X0_SLOT_SWITCH_GPIO, 0); - if (machine_is_nokia_n810()) { - err = gpio_request(N810_EMMC_VSD_GPIO, "MMC slot 2 Vddf"); - if (err) { - gpio_free(N8X0_SLOT_SWITCH_GPIO); - return; - } - gpio_direction_output(N810_EMMC_VSD_GPIO, 0); - - err = gpio_request(N810_EMMC_VIO_GPIO, "MMC slot 2 Vdd"); + err = gpio_request_array(n810_emmc_gpios, + ARRAY_SIZE(n810_emmc_gpios)); if (err) { gpio_free(N8X0_SLOT_SWITCH_GPIO); - gpio_free(N810_EMMC_VSD_GPIO); return; } - gpio_direction_output(N810_EMMC_VIO_GPIO, 0); } mmc_data[0] = &mmc1_data; diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c index bc30ab0..3ff3a2c 100644 --- a/arch/arm/mach-omap2/board-omap3beagle.c +++ b/arch/arm/mach-omap2/board-omap3beagle.c @@ -80,6 +80,12 @@ static u8 omap3_beagle_get_rev(void) return omap3_beagle_version; } +static struct gpio omap3_beagle_rev_gpios[] __initdata = { + { 171, GPIOF_IN, "rev_id_0" }, + { 172, GPIOF_IN, "rev_id_1" }, + { 173, GPIOF_IN, "rev_id_2" }, +}; + static void __init omap3_beagle_init_rev(void) { int ret; @@ -89,21 +95,13 @@ static void __init omap3_beagle_init_rev(void) omap_mux_init_gpio(172, OMAP_PIN_INPUT_PULLUP); omap_mux_init_gpio(173, OMAP_PIN_INPUT_PULLUP); - ret = gpio_request(171, "rev_id_0"); - if (ret < 0) - goto fail0; - - ret = gpio_request(172, "rev_id_1"); - if (ret < 0) - goto fail1; - - ret = gpio_request(173, "rev_id_2"); - if (ret < 0) - goto fail2; - - gpio_direction_input(171); - gpio_direction_input(172); - gpio_direction_input(173); + ret = gpio_request_array(omap3_beagle_rev_gpios, + ARRAY_SIZE(omap3_beagle_rev_gpios)); + if (ret < 0) { + printk(KERN_ERR "Unable to get revision detection GPIO pins\n"); + omap3_beagle_version = OMAP3BEAGLE_BOARD_UNKN; + return; + } beagle_rev = gpio_get_value(171) | (gpio_get_value(172) << 1) | (gpio_get_value(173) << 2); @@ -129,18 +127,6 @@ static void __init omap3_beagle_init_rev(void) printk(KERN_INFO "OMAP3 Beagle Rev: unknown %hd\n", beagle_rev); omap3_beagle_version = OMAP3BEAGLE_BOARD_UNKN; } - - return; - -fail2: - gpio_free(172); -fail1: - gpio_free(171); -fail0: - printk(KERN_ERR "Unable to get revision detection GPIO pins\n"); - omap3_beagle_version = OMAP3BEAGLE_BOARD_UNKN; - - return; } static struct mtd_partition omap3beagle_nand_partitions[] = { @@ -235,13 +221,10 @@ static void __init beagle_display_init(void) { int r; - r = gpio_request(beagle_dvi_device.reset_gpio, "DVI reset"); - if (r < 0) { + r = gpio_request_one(beagle_dvi_device.reset_gpio, GPIOF_OUT_INIT_LOW, + "DVI reset"); + if (r < 0) printk(KERN_ERR "Unable to get DVI reset GPIO\n"); - return; - } - - gpio_direction_output(beagle_dvi_device.reset_gpio, 0); } #include "sdram-micron-mt46h32m32lf-6.h" @@ -268,7 +251,7 @@ static struct gpio_led gpio_leds[]; static int beagle_twl_gpio_setup(struct device *dev, unsigned gpio, unsigned ngpio) { - int r; + int r, usb_pwr_level; if (omap3_beagle_get_rev() == OMAP3BEAGLE_BOARD_XM) { mmc[0].gpio_wp = -EINVAL; @@ -287,66 +270,46 @@ static int beagle_twl_gpio_setup(struct device *dev, beagle_vmmc1_supply.dev = mmc[0].dev; beagle_vsim_supply.dev = mmc[0].dev; - /* REVISIT: need ehci-omap hooks for external VBUS - * power switch and overcurrent detect - */ - if (omap3_beagle_get_rev() != OMAP3BEAGLE_BOARD_XM) { - r = gpio_request(gpio + 1, "EHCI_nOC"); - if (!r) { - r = gpio_direction_input(gpio + 1); - if (r) - gpio_free(gpio + 1); - } - if (r) - pr_err("%s: unable to configure EHCI_nOC\n", __func__); - } - /* * TWL4030_GPIO_MAX + 0 == ledA, EHCI nEN_USB_PWR (out, XM active * high / others active low) - */ - gpio_request(gpio + TWL4030_GPIO_MAX, "nEN_USB_PWR"); - if (omap3_beagle_get_rev() == OMAP3BEAGLE_BOARD_XM) - gpio_direction_output(gpio + TWL4030_GPIO_MAX, 1); - else - gpio_direction_output(gpio + TWL4030_GPIO_MAX, 0); - - /* DVI reset GPIO is different between beagle revisions */ - if (omap3_beagle_get_rev() == OMAP3BEAGLE_BOARD_XM) - beagle_dvi_device.reset_gpio = 129; - else - beagle_dvi_device.reset_gpio = 170; - - /* TWL4030_GPIO_MAX + 1 == ledB, PMU_STAT (out, active low LED) */ - gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1; - - /* - * gpio + 1 on Xm controls the TFP410's enable line (active low) - * gpio + 2 control varies depending on the board rev as follows: - * P7/P8 revisions(prototype): Camera EN - * A2+ revisions (production): LDO (supplies DVI, serial, led blocks) + * DVI reset GPIO is different between beagle revisions */ if (omap3_beagle_get_rev() == OMAP3BEAGLE_BOARD_XM) { - r = gpio_request(gpio + 1, "nDVI_PWR_EN"); - if (!r) { - r = gpio_direction_output(gpio + 1, 0); - if (r) - gpio_free(gpio + 1); - } + usb_pwr_level = GPIOF_OUT_INIT_HIGH; + beagle_dvi_device.reset_gpio = 129; + /* + * gpio + 1 on Xm controls the TFP410's enable line (active low) + * gpio + 2 control varies depending on the board rev as below: + * P7/P8 revisions(prototype): Camera EN + * A2+ revisions (production): LDO (DVI, serial, led blocks) + */ + r = gpio_request_one(gpio + 1, GPIOF_OUT_INIT_LOW, + "nDVI_PWR_EN"); if (r) pr_err("%s: unable to configure nDVI_PWR_EN\n", __func__); - r = gpio_request(gpio + 2, "DVI_LDO_EN"); - if (!r) { - r = gpio_direction_output(gpio + 2, 1); - if (r) - gpio_free(gpio + 2); - } + r = gpio_request_one(gpio + 2, GPIOF_OUT_INIT_HIGH, + "DVI_LDO_EN"); if (r) pr_err("%s: unable to configure DVI_LDO_EN\n", __func__); + } else { + usb_pwr_level = GPIOF_OUT_INIT_LOW; + beagle_dvi_device.reset_gpio = 170; + /* + * REVISIT: need ehci-omap hooks for external VBUS + * power switch and overcurrent detect + */ + if (gpio_request_one(gpio + 1, GPIOF_IN, "EHCI_nOC")) + pr_err("%s: unable to configure EHCI_nOC\n", __func__); } + gpio_request_one(gpio + TWL4030_GPIO_MAX, usb_pwr_level, "nEN_USB_PWR"); + + /* TWL4030_GPIO_MAX + 1 == ledB, PMU_STAT (out, active low LED) */ + gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1; + return 0; } @@ -608,9 +571,8 @@ static void __init omap3_beagle_init(void) omap_serial_init(); omap_mux_init_gpio(170, OMAP_PIN_INPUT); - gpio_request(170, "DVI_nPD"); /* REVISIT leave DVI powered down until it's needed ... */ - gpio_direction_output(170, true); + gpio_request_one(170, GPIOF_OUT_INIT_HIGH, "DVI_nPD"); usb_musb_init(NULL); usbhs_init(&usbhs_bdata); diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c index 5066b0b..02e1ad2 100644 --- a/arch/arm/mach-omap2/board-omap3evm.c +++ b/arch/arm/mach-omap2/board-omap3evm.c @@ -149,6 +149,15 @@ static inline void __init omap3evm_init_smsc911x(void) { return; } #define OMAP3EVM_LCD_PANEL_BKLIGHT_GPIO 210 #define OMAP3EVM_DVI_PANEL_EN_GPIO 199 +static struct gpio omap3_evm_dss_gpios[] __initdata = { + { OMAP3EVM_LCD_PANEL_RESB, GPIOF_OUT_INIT_HIGH, "lcd_panel_resb" }, + { OMAP3EVM_LCD_PANEL_INI, GPIOF_OUT_INIT_HIGH, "lcd_panel_ini" }, + { OMAP3EVM_LCD_PANEL_QVGA, GPIOF_OUT_INIT_LOW, "lcd_panel_qvga" }, + { OMAP3EVM_LCD_PANEL_LR, GPIOF_OUT_INIT_HIGH, "lcd_panel_lr" }, + { OMAP3EVM_LCD_PANEL_UD, GPIOF_OUT_INIT_HIGH, "lcd_panel_ud" }, + { OMAP3EVM_LCD_PANEL_ENVDD, GPIOF_OUT_INIT_LOW, "lcd_panel_envdd" }, +}; + static int lcd_enabled; static int dvi_enabled; @@ -156,61 +165,10 @@ static void __init omap3_evm_display_init(void) { int r; - r = gpio_request(OMAP3EVM_LCD_PANEL_RESB, "lcd_panel_resb"); - if (r) { - printk(KERN_ERR "failed to get lcd_panel_resb\n"); - return; - } - gpio_direction_output(OMAP3EVM_LCD_PANEL_RESB, 1); - - r = gpio_request(OMAP3EVM_LCD_PANEL_INI, "lcd_panel_ini"); - if (r) { - printk(KERN_ERR "failed to get lcd_panel_ini\n"); - goto err_1; - } - gpio_direction_output(OMAP3EVM_LCD_PANEL_INI, 1); - - r = gpio_request(OMAP3EVM_LCD_PANEL_QVGA, "lcd_panel_qvga"); - if (r) { - printk(KERN_ERR "failed to get lcd_panel_qvga\n"); - goto err_2; - } - gpio_direction_output(OMAP3EVM_LCD_PANEL_QVGA, 0); - - r = gpio_request(OMAP3EVM_LCD_PANEL_LR, "lcd_panel_lr"); - if (r) { - printk(KERN_ERR "failed to get lcd_panel_lr\n"); - goto err_3; - } - gpio_direction_output(OMAP3EVM_LCD_PANEL_LR, 1); - - r = gpio_request(OMAP3EVM_LCD_PANEL_UD, "lcd_panel_ud"); - if (r) { - printk(KERN_ERR "failed to get lcd_panel_ud\n"); - goto err_4; - } - gpio_direction_output(OMAP3EVM_LCD_PANEL_UD, 1); - - r = gpio_request(OMAP3EVM_LCD_PANEL_ENVDD, "lcd_panel_envdd"); - if (r) { - printk(KERN_ERR "failed to get lcd_panel_envdd\n"); - goto err_5; - } - gpio_direction_output(OMAP3EVM_LCD_PANEL_ENVDD, 0); - - return; - -err_5: - gpio_free(OMAP3EVM_LCD_PANEL_UD); -err_4: - gpio_free(OMAP3EVM_LCD_PANEL_LR); -err_3: - gpio_free(OMAP3EVM_LCD_PANEL_QVGA); -err_2: - gpio_free(OMAP3EVM_LCD_PANEL_INI); -err_1: - gpio_free(OMAP3EVM_LCD_PANEL_RESB); - + r = gpio_request_array(omap3_evm_dss_gpios, + ARRAY_SIZE(omap3_evm_dss_gpios)); + if (r) + printk(KERN_ERR "failed to get lcd_panel_* gpios\n"); } static int omap3_evm_enable_lcd(struct omap_dss_device *dssdev) @@ -400,7 +358,7 @@ static struct platform_device leds_gpio = { static int omap3evm_twl_gpio_setup(struct device *dev, unsigned gpio, unsigned ngpio) { - int r; + int r, lcd_bl_en; /* gpio + 0 is "mmc0_cd" (input/IRQ) */ omap_mux_init_gpio(63, OMAP_PIN_INPUT); @@ -417,16 +375,14 @@ static int omap3evm_twl_gpio_setup(struct device *dev, */ /* TWL4030_GPIO_MAX + 0 == ledA, LCD Backlight control */ - r = gpio_request(gpio + TWL4030_GPIO_MAX, "EN_LCD_BKL"); - if (!r) - r = gpio_direction_output(gpio + TWL4030_GPIO_MAX, - (get_omap3_evm_rev() >= OMAP3EVM_BOARD_GEN_2) ? 1 : 0); + lcd_bl_en = get_omap3_evm_rev() >= OMAP3EVM_BOARD_GEN_2 ? + GPIOF_OUT_INIT_HIGH : GPIOF_OUT_INIT_LOW; + r = gpio_request_one(gpio + TWL4030_GPIO_MAX, lcd_bl_en, "EN_LCD_BKL"); if (r) printk(KERN_ERR "failed to get/set lcd_bkl gpio\n"); /* gpio + 7 == DVI Enable */ - gpio_request(gpio + 7, "EN_DVI"); - gpio_direction_output(gpio + 7, 0); + gpio_request_one(gpio + 7, GPIOF_OUT_INIT_LOW, "EN_DVI"); /* TWL4030_GPIO_MAX + 1 == ledB (out, active low LED) */ gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1; @@ -717,6 +673,11 @@ static struct omap_musb_board_data musb_board_data = { .power = 100, }; +static struct gpio omap3_evm_ehci_gpios[] __initdata = { + { OMAP3_EVM_EHCI_VBUS, GPIOF_OUT_INIT_HIGH, "enable EHCI VBUS" }, + { OMAP3_EVM_EHCI_SELECT, GPIOF_OUT_INIT_LOW, "select EHCI port" }, +}; + static void __init omap3_evm_init(void) { omap3_evm_get_revision(); @@ -740,16 +701,12 @@ static void __init omap3_evm_init(void) if (get_omap3_evm_rev() >= OMAP3EVM_BOARD_GEN_2) { /* enable EHCI VBUS using GPIO22 */ - omap_mux_init_gpio(22, OMAP_PIN_INPUT_PULLUP); - gpio_request(OMAP3_EVM_EHCI_VBUS, "enable EHCI VBUS"); - gpio_direction_output(OMAP3_EVM_EHCI_VBUS, 0); - gpio_set_value(OMAP3_EVM_EHCI_VBUS, 1); - + omap_mux_init_gpio(OMAP3_EVM_EHCI_VBUS, OMAP_PIN_INPUT_PULLUP); /* Select EHCI port on main board */ - omap_mux_init_gpio(61, OMAP_PIN_INPUT_PULLUP); - gpio_request(OMAP3_EVM_EHCI_SELECT, "select EHCI port"); - gpio_direction_output(OMAP3_EVM_EHCI_SELECT, 0); - gpio_set_value(OMAP3_EVM_EHCI_SELECT, 0); + omap_mux_init_gpio(OMAP3_EVM_EHCI_SELECT, + OMAP_PIN_INPUT_PULLUP); + gpio_request_array(omap3_evm_ehci_gpios, + ARRAY_SIZE(omap3_evm_ehci_gpios)); /* setup EHCI phy reset config */ omap_mux_init_gpio(21, OMAP_PIN_INPUT_PULLUP); diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c index 6c22d3f..78dd2a7 100644 --- a/arch/arm/mach-omap2/board-omap3pandora.c +++ b/arch/arm/mach-omap2/board-omap3pandora.c @@ -305,24 +305,13 @@ static int omap3pandora_twl_gpio_setup(struct device *dev, /* gpio + 13 drives 32kHz buffer for wifi module */ gpio_32khz = gpio + 13; - ret = gpio_request(gpio_32khz, "wifi 32kHz"); + ret = gpio_request_one(gpio_32khz, GPIOF_OUT_INIT_HIGH, "wifi 32kHz"); if (ret < 0) { pr_err("Cannot get GPIO line %d, ret=%d\n", gpio_32khz, ret); - goto fail; - } - - ret = gpio_direction_output(gpio_32khz, 1); - if (ret < 0) { - pr_err("Cannot set GPIO line %d, ret=%d\n", gpio_32khz, ret); - goto fail_direction; + return -ENODEV; } return 0; - -fail_direction: - gpio_free(gpio_32khz); -fail: - return -ENODEV; } static struct twl4030_gpio_platform_data omap3pandora_gpio_data = { @@ -584,14 +573,10 @@ static void __init pandora_wl1251_init(void) memset(&pandora_wl1251_pdata, 0, sizeof(pandora_wl1251_pdata)); - ret = gpio_request(PANDORA_WIFI_IRQ_GPIO, "wl1251 irq"); + ret = gpio_request_one(PANDORA_WIFI_IRQ_GPIO, GPIOF_IN, "wl1251 irq"); if (ret < 0) goto fail; - ret = gpio_direction_input(PANDORA_WIFI_IRQ_GPIO); - if (ret < 0) - goto fail_irq; - pandora_wl1251_pdata.irq = gpio_to_irq(PANDORA_WIFI_IRQ_GPIO); if (pandora_wl1251_pdata.irq < 0) goto fail_irq; diff --git a/arch/arm/mach-omap2/board-omap3stalker.c b/arch/arm/mach-omap2/board-omap3stalker.c index 9981d06..085c60a 100644 --- a/arch/arm/mach-omap2/board-omap3stalker.c +++ b/arch/arm/mach-omap2/board-omap3stalker.c @@ -331,12 +331,11 @@ omap3stalker_twl_gpio_setup(struct device *dev, */ /* TWL4030_GPIO_MAX + 0 == ledA, LCD Backlight control */ - gpio_request(gpio + TWL4030_GPIO_MAX, "EN_LCD_BKL"); - gpio_direction_output(gpio + TWL4030_GPIO_MAX, 0); + gpio_request_one(gpio + TWL4030_GPIO_MAX, GPIOF_OUT_INIT_LOW, + "EN_LCD_BKL"); /* gpio + 7 == DVI Enable */ - gpio_request(gpio + 7, "EN_DVI"); - gpio_direction_output(gpio + 7, 0); + gpio_request_one(gpio + 7, GPIOF_OUT_INIT_LOW, "EN_DVI"); /* TWL4030_GPIO_MAX + 1 == ledB (out, mmc0) */ gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1; diff --git a/arch/arm/mach-omap2/board-omap3touchbook.c b/arch/arm/mach-omap2/board-omap3touchbook.c index 392278d..82872d7 100644 --- a/arch/arm/mach-omap2/board-omap3touchbook.c +++ b/arch/arm/mach-omap2/board-omap3touchbook.c @@ -146,13 +146,11 @@ static int touchbook_twl_gpio_setup(struct device *dev, /* REVISIT: need ehci-omap hooks for external VBUS * power switch and overcurrent detect */ - - gpio_request(gpio + 1, "EHCI_nOC"); - gpio_direction_input(gpio + 1); + gpio_request_one(gpio + 1, GPIOF_IN, "EHCI_nOC"); /* TWL4030_GPIO_MAX + 0 == ledA, EHCI nEN_USB_PWR (out, active low) */ - gpio_request(gpio + TWL4030_GPIO_MAX, "nEN_USB_PWR"); - gpio_direction_output(gpio + TWL4030_GPIO_MAX, 0); + gpio_request_one(gpio + TWL4030_GPIO_MAX, GPIOF_OUT_INIT_LOW, + "nEN_USB_PWR"); /* TWL4030_GPIO_MAX + 1 == ledB, PMU_STAT (out, active low LED) */ gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1; @@ -401,15 +399,10 @@ static const struct usbhs_omap_board_data usbhs_bdata __initconst = { static void omap3_touchbook_poweroff(void) { - int r; + int pwr_off = TB_KILL_POWER_GPIO; - r = gpio_request(TB_KILL_POWER_GPIO, "DVI reset"); - if (r < 0) { + if (gpio_request_one(pwr_off, GPIOF_OUT_INIT_LOW, "DVI reset") < 0) printk(KERN_ERR "Unable to get kill power GPIO\n"); - return; - } - - gpio_direction_output(TB_KILL_POWER_GPIO, 0); } static int __init early_touchbook_revision(char *p) @@ -435,9 +428,8 @@ static void __init omap3_touchbook_init(void) omap_serial_init(); omap_mux_init_gpio(170, OMAP_PIN_INPUT); - gpio_request(176, "DVI_nPD"); /* REVISIT leave DVI powered down until it's needed ... */ - gpio_direction_output(176, true); + gpio_request_one(176, GPIOF_OUT_INIT_HIGH, "DVI_nPD"); /* Touchscreen and accelerometer */ omap_ads7846_init(4, OMAP3_TS_GPIO, 310, &ads7846_pdata); diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c index 7eaad62..5d7c0a3 100644 --- a/arch/arm/mach-omap2/board-omap4panda.c +++ b/arch/arm/mach-omap2/board-omap4panda.c @@ -112,6 +112,11 @@ static const struct usbhs_omap_board_data usbhs_bdata __initconst = { .reset_gpio_port[2] = -EINVAL }; +static struct gpio panda_ehci_gpios[] __initdata = { + { GPIO_HUB_POWER, GPIOF_OUT_INIT_LOW, "hub_power" }, + { GPIO_HUB_NRESET, GPIOF_OUT_INIT_LOW, "hub_nreset" }, +}; + static void __init omap4_ehci_init(void) { int ret; @@ -121,44 +126,27 @@ static void __init omap4_ehci_init(void) phy_ref_clk = clk_get(NULL, "auxclk3_ck"); if (IS_ERR(phy_ref_clk)) { pr_err("Cannot request auxclk3\n"); - goto error1; + return; } clk_set_rate(phy_ref_clk, 19200000); clk_enable(phy_ref_clk); - /* disable the power to the usb hub prior to init */ - ret = gpio_request(GPIO_HUB_POWER, "hub_power"); + /* disable the power to the usb hub prior to init and reset phy+hub */ + ret = gpio_request_array(panda_ehci_gpios, + ARRAY_SIZE(panda_ehci_gpios)); if (ret) { - pr_err("Cannot request GPIO %d\n", GPIO_HUB_POWER); - goto error1; + pr_err("Unable to initialize EHCI power/reset\n"); + return; } - gpio_export(GPIO_HUB_POWER, 0); - gpio_direction_output(GPIO_HUB_POWER, 0); - gpio_set_value(GPIO_HUB_POWER, 0); - /* reset phy+hub */ - ret = gpio_request(GPIO_HUB_NRESET, "hub_nreset"); - if (ret) { - pr_err("Cannot request GPIO %d\n", GPIO_HUB_NRESET); - goto error2; - } + gpio_export(GPIO_HUB_POWER, 0); gpio_export(GPIO_HUB_NRESET, 0); - gpio_direction_output(GPIO_HUB_NRESET, 0); - gpio_set_value(GPIO_HUB_NRESET, 0); gpio_set_value(GPIO_HUB_NRESET, 1); usbhs_init(&usbhs_bdata); /* enable power to hub */ gpio_set_value(GPIO_HUB_POWER, 1); - return; - -error2: - gpio_free(GPIO_HUB_POWER); -error1: - pr_err("Unable to initialize EHCI power/reset\n"); - return; - } static struct omap_musb_board_data musb_board_data = { @@ -638,27 +626,19 @@ static void omap4_panda_hdmi_mux_init(void) OMAP_PIN_INPUT_PULLUP); } +static struct gpio panda_hdmi_gpios[] = { + { HDMI_GPIO_HPD, GPIOF_OUT_INIT_HIGH, "hdmi_gpio_hpd" }, + { HDMI_GPIO_LS_OE, GPIOF_OUT_INIT_HIGH, "hdmi_gpio_ls_oe" }, +}; + static int omap4_panda_panel_enable_hdmi(struct omap_dss_device *dssdev) { int status; - status = gpio_request_one(HDMI_GPIO_HPD, GPIOF_OUT_INIT_HIGH, - "hdmi_gpio_hpd"); - if (status) { - pr_err("Cannot request GPIO %d\n", HDMI_GPIO_HPD); - return status; - } - status = gpio_request_one(HDMI_GPIO_LS_OE, GPIOF_OUT_INIT_HIGH, - "hdmi_gpio_ls_oe"); - if (status) { - pr_err("Cannot request GPIO %d\n", HDMI_GPIO_LS_OE); - goto error1; - } - - return 0; - -error1: - gpio_free(HDMI_GPIO_HPD); + status = gpio_request_array(panda_hdmi_gpios, + ARRAY_SIZE(panda_hdmi_gpios)); + if (status) + pr_err("Cannot request HDMI GPIOs\n"); return status; } diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c index e152c13..c03f92b 100644 --- a/arch/arm/mach-omap2/board-overo.c +++ b/arch/arm/mach-omap2/board-overo.c @@ -151,21 +151,20 @@ static int dvi_enabled; #define OVERO_GPIO_LCD_EN 144 #define OVERO_GPIO_LCD_BL 145 +static struct gpio overo_dss_gpios[] __initdata = { + { OVERO_GPIO_LCD_EN, GPIOF_OUT_INIT_HIGH, "OVERO_GPIO_LCD_EN" }, + { OVERO_GPIO_LCD_BL, GPIOF_OUT_INIT_HIGH, "OVERO_GPIO_LCD_BL" }, +}; + static void __init overo_display_init(void) { - if ((gpio_request(OVERO_GPIO_LCD_EN, "OVERO_GPIO_LCD_EN") == 0) && - (gpio_direction_output(OVERO_GPIO_LCD_EN, 1) == 0)) - gpio_export(OVERO_GPIO_LCD_EN, 0); - else - printk(KERN_ERR "could not obtain gpio for " - "OVERO_GPIO_LCD_EN\n"); + if (gpio_request_array(overo_dss_gpios, ARRAY_SIZE(overo_dss_gpios))) { + printk(KERN_ERR "could not obtain DSS control GPIOs\n"); + return; + } - if ((gpio_request(OVERO_GPIO_LCD_BL, "OVERO_GPIO_LCD_BL") == 0) && - (gpio_direction_output(OVERO_GPIO_LCD_BL, 1) == 0)) - gpio_export(OVERO_GPIO_LCD_BL, 0); - else - printk(KERN_ERR "could not obtain gpio for " - "OVERO_GPIO_LCD_BL\n"); + gpio_export(OVERO_GPIO_LCD_EN, 0); + gpio_export(OVERO_GPIO_LCD_BL, 0); } static int overo_panel_enable_dvi(struct omap_dss_device *dssdev) @@ -553,8 +552,15 @@ static struct omap_board_mux board_mux[] __initdata = { }; #endif +static struct gpio overo_bt_gpios[] __initdata = { + { OVERO_GPIO_BT_XGATE, GPIOF_OUT_INIT_LOW, "lcd enable" }, + { OVERO_GPIO_BT_NRESET, GPIOF_OUT_INIT_HIGH, "lcd bl enable" }, +}; + static void __init overo_init(void) { + int ret; + omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); overo_i2c_init(); omap_display_init(&overo_dss_data); @@ -574,9 +580,9 @@ static void __init overo_init(void) omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT); omap_mux_init_signal("sdrc_cke1", OMAP_PIN_OUTPUT); - if ((gpio_request(OVERO_GPIO_W2W_NRESET, - "OVERO_GPIO_W2W_NRESET") == 0) && - (gpio_direction_output(OVERO_GPIO_W2W_NRESET, 1) == 0)) { + ret = gpio_request_one(OVERO_GPIO_W2W_NRESET, GPIOF_OUT_INIT_HIGH, + "OVERO_GPIO_W2W_NRESET"); + if (ret == 0) { gpio_export(OVERO_GPIO_W2W_NRESET, 0); gpio_set_value(OVERO_GPIO_W2W_NRESET, 0); udelay(10); @@ -586,25 +592,20 @@ static void __init overo_init(void) "OVERO_GPIO_W2W_NRESET\n"); } - if ((gpio_request(OVERO_GPIO_BT_XGATE, "OVERO_GPIO_BT_XGATE") == 0) && - (gpio_direction_output(OVERO_GPIO_BT_XGATE, 0) == 0)) + ret = gpio_request_array(overo_bt_gpios, ARRAY_SIZE(overo_bt_gpios)); + if (ret) { + pr_err("%s: could not obtain BT gpios\n", __func__); + } else { gpio_export(OVERO_GPIO_BT_XGATE, 0); - else - printk(KERN_ERR "could not obtain gpio for OVERO_GPIO_BT_XGATE\n"); - - if ((gpio_request(OVERO_GPIO_BT_NRESET, "OVERO_GPIO_BT_NRESET") == 0) && - (gpio_direction_output(OVERO_GPIO_BT_NRESET, 1) == 0)) { gpio_export(OVERO_GPIO_BT_NRESET, 0); gpio_set_value(OVERO_GPIO_BT_NRESET, 0); mdelay(6); gpio_set_value(OVERO_GPIO_BT_NRESET, 1); - } else { - printk(KERN_ERR "could not obtain gpio for " - "OVERO_GPIO_BT_NRESET\n"); } - if ((gpio_request(OVERO_GPIO_USBH_CPEN, "OVERO_GPIO_USBH_CPEN") == 0) && - (gpio_direction_output(OVERO_GPIO_USBH_CPEN, 1) == 0)) + ret = gpio_request_one(OVERO_GPIO_USBH_CPEN, GPIOF_OUT_INIT_HIGH, + "OVERO_GPIO_USBH_CPEN"); + if (ret == 0) gpio_export(OVERO_GPIO_USBH_CPEN, 0); else printk(KERN_ERR "could not obtain gpio for " diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c index a5bf5e9..2e509f9 100644 --- a/arch/arm/mach-omap2/board-rx51-peripherals.c +++ b/arch/arm/mach-omap2/board-rx51-peripherals.c @@ -558,10 +558,8 @@ static __init void rx51_init_si4713(void) static int rx51_twlgpio_setup(struct device *dev, unsigned gpio, unsigned n) { /* FIXME this gpio setup is just a placeholder for now */ - gpio_request(gpio + 6, "backlight_pwm"); - gpio_direction_output(gpio + 6, 0); - gpio_request(gpio + 7, "speaker_en"); - gpio_direction_output(gpio + 7, 1); + gpio_request_one(gpio + 6, GPIOF_OUT_INIT_LOW, "backlight_pwm"); + gpio_request_one(gpio + 7, GPIOF_OUT_INIT_HIGH, "speaker_en"); return 0; } @@ -912,26 +910,20 @@ static void rx51_wl1251_set_power(bool enable) gpio_set_value(RX51_WL1251_POWER_GPIO, enable); } +static struct gpio rx51_wl1251_gpios[] __initdata = { + { RX51_WL1251_POWER_GPIO, GPIOF_OUT_INIT_LOW, "wl1251 power" }, + { RX51_WL1251_IRQ_GPIO, GPIOF_IN, "wl1251 irq" }, +}; + static void __init rx51_init_wl1251(void) { int irq, ret; - ret = gpio_request(RX51_WL1251_POWER_GPIO, "wl1251 power"); + ret = gpio_request_array(rx51_wl1251_gpios, + ARRAY_SIZE(rx51_wl1251_gpios)); if (ret < 0) goto error; - ret = gpio_direction_output(RX51_WL1251_POWER_GPIO, 0); - if (ret < 0) - goto err_power; - - ret = gpio_request(RX51_WL1251_IRQ_GPIO, "wl1251 irq"); - if (ret < 0) - goto err_power; - - ret = gpio_direction_input(RX51_WL1251_IRQ_GPIO); - if (ret < 0) - goto err_irq; - irq = gpio_to_irq(RX51_WL1251_IRQ_GPIO); if (irq < 0) goto err_irq; @@ -943,10 +935,7 @@ static void __init rx51_init_wl1251(void) err_irq: gpio_free(RX51_WL1251_IRQ_GPIO); - -err_power: gpio_free(RX51_WL1251_POWER_GPIO); - error: printk(KERN_ERR "wl1251 board initialisation failed\n"); wl1251_pdata.set_power = NULL; diff --git a/arch/arm/mach-omap2/board-rx51-video.c b/arch/arm/mach-omap2/board-rx51-video.c index 89a66db..1977733 100644 --- a/arch/arm/mach-omap2/board-rx51-video.c +++ b/arch/arm/mach-omap2/board-rx51-video.c @@ -76,13 +76,12 @@ static int __init rx51_video_init(void) return 0; } - if (gpio_request(RX51_LCD_RESET_GPIO, "LCD ACX565AKM reset")) { + if (gpio_request_one(RX51_LCD_RESET_GPIO, GPIOF_OUT_INIT_HIGH, + "LCD ACX565AKM reset")) { pr_err("%s failed to get LCD Reset GPIO\n", __func__); return 0; } - gpio_direction_output(RX51_LCD_RESET_GPIO, 1); - omap_display_init(&rx51_dss_board_info); return 0; } diff --git a/arch/arm/mach-omap2/board-zoom-debugboard.c b/arch/arm/mach-omap2/board-zoom-debugboard.c index 2ee9ab9..6402e78 100644 --- a/arch/arm/mach-omap2/board-zoom-debugboard.c +++ b/arch/arm/mach-omap2/board-zoom-debugboard.c @@ -77,12 +77,9 @@ static inline void __init zoom_init_quaduart(void) quart_gpio = ZOOM_QUADUART_GPIO; - if (gpio_request(quart_gpio, "TL16CP754C GPIO") < 0) { + if (gpio_request_one(quart_gpio, GPIOF_IN, "TL16CP754C GPIO") < 0) printk(KERN_ERR "Failed to request GPIO%d for TL16CP754C\n", quart_gpio); - return; - } - gpio_direction_input(quart_gpio); } static inline int omap_zoom_debugboard_detect(void) @@ -92,12 +89,12 @@ static inline int omap_zoom_debugboard_detect(void) debug_board_detect = ZOOM_SMSC911X_GPIO; - if (gpio_request(debug_board_detect, "Zoom debug board detect") < 0) { + if (gpio_request_one(debug_board_detect, GPIOF_IN, + "Zoom debug board detect") < 0) { printk(KERN_ERR "Failed to request GPIO%d for Zoom debug" "board detect\n", debug_board_detect); return 0; } - gpio_direction_input(debug_board_detect); if (!gpio_get_value(debug_board_detect)) { ret = 0; diff --git a/arch/arm/mach-omap2/board-zoom-display.c b/arch/arm/mach-omap2/board-zoom-display.c index 37b84c2..ce53e82 100644 --- a/arch/arm/mach-omap2/board-zoom-display.c +++ b/arch/arm/mach-omap2/board-zoom-display.c @@ -21,34 +21,19 @@ #define LCD_PANEL_RESET_GPIO_PILOT 55 #define LCD_PANEL_QVGA_GPIO 56 +static struct gpio zoom_lcd_gpios[] __initdata = { + { -EINVAL, GPIOF_OUT_INIT_HIGH, "lcd reset" }, + { LCD_PANEL_QVGA_GPIO, GPIOF_OUT_INIT_HIGH, "lcd qvga" }, +}; + static void zoom_lcd_panel_init(void) { - int ret; - unsigned char lcd_panel_reset_gpio; - - lcd_panel_reset_gpio = (omap_rev() > OMAP3430_REV_ES3_0) ? + zoom_lcd_gpios[0].gpio = (omap_rev() > OMAP3430_REV_ES3_0) ? LCD_PANEL_RESET_GPIO_PROD : LCD_PANEL_RESET_GPIO_PILOT; - ret = gpio_request(lcd_panel_reset_gpio, "lcd reset"); - if (ret) { - pr_err("Failed to get LCD reset GPIO (gpio%d).\n", - lcd_panel_reset_gpio); - return; - } - gpio_direction_output(lcd_panel_reset_gpio, 1); - - ret = gpio_request(LCD_PANEL_QVGA_GPIO, "lcd qvga"); - if (ret) { - pr_err("Failed to get LCD_PANEL_QVGA_GPIO (gpio%d).\n", - LCD_PANEL_QVGA_GPIO); - goto err0; - } - gpio_direction_output(LCD_PANEL_QVGA_GPIO, 1); - - return; -err0: - gpio_free(lcd_panel_reset_gpio); + if (gpio_request_array(zoom_lcd_gpios, ARRAY_SIZE(zoom_lcd_gpios))) + pr_err("%s: Failed to get LCD GPIOs.\n", __func__); } static int zoom_panel_enable_lcd(struct omap_dss_device *dssdev) diff --git a/arch/arm/mach-omap2/board-zoom-peripherals.c b/arch/arm/mach-omap2/board-zoom-peripherals.c index 489294a..118c6f5 100644 --- a/arch/arm/mach-omap2/board-zoom-peripherals.c +++ b/arch/arm/mach-omap2/board-zoom-peripherals.c @@ -277,13 +277,11 @@ static int zoom_twl_gpio_setup(struct device *dev, zoom_vsim_supply.dev = mmc[0].dev; zoom_vmmc2_supply.dev = mmc[1].dev; - ret = gpio_request(LCD_PANEL_ENABLE_GPIO, "lcd enable"); - if (ret) { + ret = gpio_request_one(LCD_PANEL_ENABLE_GPIO, GPIOF_OUT_INIT_LOW, + "lcd enable"); + if (ret) pr_err("Failed to get LCD_PANEL_ENABLE_GPIO (gpio%d).\n", LCD_PANEL_ENABLE_GPIO); - return ret; - } - gpio_direction_output(LCD_PANEL_ENABLE_GPIO, 0); return ret; } diff --git a/arch/arm/mach-omap2/gpmc-smc91x.c b/arch/arm/mach-omap2/gpmc-smc91x.c index 877c6f5..ba10c24 100644 --- a/arch/arm/mach-omap2/gpmc-smc91x.c +++ b/arch/arm/mach-omap2/gpmc-smc91x.c @@ -147,25 +147,24 @@ void __init gpmc_smc91x_init(struct omap_smc91x_platform_data *board_data) goto free1; } - if (gpio_request(gpmc_cfg->gpio_irq, "SMC91X irq") < 0) + if (gpio_request_one(gpmc_cfg->gpio_irq, GPIOF_IN, "SMC91X irq") < 0) goto free1; - gpio_direction_input(gpmc_cfg->gpio_irq); gpmc_smc91x_resources[1].start = gpio_to_irq(gpmc_cfg->gpio_irq); if (gpmc_cfg->gpio_pwrdwn) { - ret = gpio_request(gpmc_cfg->gpio_pwrdwn, "SMC91X powerdown"); + ret = gpio_request_one(gpmc_cfg->gpio_pwrdwn, + GPIOF_OUT_INIT_LOW, "SMC91X powerdown"); if (ret) goto free2; - gpio_direction_output(gpmc_cfg->gpio_pwrdwn, 0); } if (gpmc_cfg->gpio_reset) { - ret = gpio_request(gpmc_cfg->gpio_reset, "SMC91X reset"); + ret = gpio_request_one(gpmc_cfg->gpio_reset, + GPIOF_OUT_INIT_LOW, "SMC91X reset"); if (ret) goto free3; - gpio_direction_output(gpmc_cfg->gpio_reset, 0); gpio_set_value(gpmc_cfg->gpio_reset, 1); msleep(100); gpio_set_value(gpmc_cfg->gpio_reset, 0); diff --git a/arch/arm/mach-omap2/gpmc-smsc911x.c b/arch/arm/mach-omap2/gpmc-smsc911x.c index e09374a..9970331 100644 --- a/arch/arm/mach-omap2/gpmc-smsc911x.c +++ b/arch/arm/mach-omap2/gpmc-smsc911x.c @@ -63,23 +63,22 @@ void __init gpmc_smsc911x_init(struct omap_smsc911x_platform_data *board_data) gpmc_smsc911x_resources[0].start = cs_mem_base + 0x0; gpmc_smsc911x_resources[0].end = cs_mem_base + 0xff; - if (gpio_request(gpmc_cfg->gpio_irq, "smsc911x irq") < 0) { + if (gpio_request_one(gpmc_cfg->gpio_irq, GPIOF_IN, "smsc911x irq")) { pr_err("Failed to request IRQ GPIO%d\n", gpmc_cfg->gpio_irq); goto free1; } - gpio_direction_input(gpmc_cfg->gpio_irq); gpmc_smsc911x_resources[1].start = gpio_to_irq(gpmc_cfg->gpio_irq); if (gpio_is_valid(gpmc_cfg->gpio_reset)) { - ret = gpio_request(gpmc_cfg->gpio_reset, "smsc911x reset"); + ret = gpio_request_one(gpmc_cfg->gpio_reset, + GPIOF_OUT_INIT_HIGH, "smsc911x reset"); if (ret) { pr_err("Failed to request reset GPIO%d\n", gpmc_cfg->gpio_reset); goto free2; } - gpio_direction_output(gpmc_cfg->gpio_reset, 1); gpio_set_value(gpmc_cfg->gpio_reset, 0); msleep(100); gpio_set_value(gpmc_cfg->gpio_reset, 1); diff --git a/arch/arm/mach-omap2/usb-tusb6010.c b/arch/arm/mach-omap2/usb-tusb6010.c index 8a3c05f..8dd26b7 100644 --- a/arch/arm/mach-omap2/usb-tusb6010.c +++ b/arch/arm/mach-omap2/usb-tusb6010.c @@ -293,12 +293,11 @@ tusb6010_setup_interface(struct musb_hdrc_platform_data *data, ); /* IRQ */ - status = gpio_request(irq, "TUSB6010 irq"); + status = gpio_request_one(irq, GPIOF_IN, "TUSB6010 irq"); if (status < 0) { printk(error, 3, status); return status; } - gpio_direction_input(irq); tusb_resources[2].start = irq + IH_GPIO_BASE; /* set up memory timings ... can speed them up later */ -- cgit v0.10.2 From 91d94af56a52ffc059523fdad71287232c040697 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Fri, 13 May 2011 04:41:32 -0700 Subject: omap: Remove support for omap2evm The board support has never been merged for it as noticed by Russell King . So let's remove the related dead code. Cc: linux-fbdev@vger.kernel.org Cc: alsa-devel@alsa-project.org Cc: Paul Mundt Acked-by: Jarkko Nikula Acked-by: Tomi Valkeinen Acked-by: Mark Brown Acked-by: Liam Girdwood Signed-off-by: Tony Lindgren diff --git a/arch/arm/plat-omap/include/plat/uncompress.h b/arch/arm/plat-omap/include/plat/uncompress.h index 30b891c..2b576f1 100644 --- a/arch/arm/plat-omap/include/plat/uncompress.h +++ b/arch/arm/plat-omap/include/plat/uncompress.h @@ -129,7 +129,6 @@ static inline void __arch_decomp_setup(unsigned long arch_id) DEBUG_LL_OMAP1(3, sx1); /* omap2 based boards using UART1 */ - DEBUG_LL_OMAP2(1, omap2evm); DEBUG_LL_OMAP2(1, omap_2430sdp); DEBUG_LL_OMAP2(1, omap_apollon); DEBUG_LL_OMAP2(1, omap_h4); diff --git a/drivers/video/omap/Makefile b/drivers/video/omap/Makefile index 49226a1..25db556 100644 --- a/drivers/video/omap/Makefile +++ b/drivers/video/omap/Makefile @@ -30,7 +30,6 @@ objs-y$(CONFIG_MACH_OMAP_APOLLON) += lcd_apollon.o objs-y$(CONFIG_MACH_OMAP_2430SDP) += lcd_2430sdp.o objs-y$(CONFIG_MACH_OMAP_3430SDP) += lcd_2430sdp.o objs-y$(CONFIG_MACH_OMAP_LDP) += lcd_ldp.o -objs-y$(CONFIG_MACH_OMAP2EVM) += lcd_omap2evm.o objs-y$(CONFIG_MACH_OMAP3EVM) += lcd_omap3evm.o objs-y$(CONFIG_MACH_OMAP3_BEAGLE) += lcd_omap3beagle.o objs-y$(CONFIG_FB_OMAP_LCD_MIPID) += lcd_mipid.o diff --git a/drivers/video/omap/lcd_omap2evm.c b/drivers/video/omap/lcd_omap2evm.c deleted file mode 100644 index 7e7a65c..0000000 --- a/drivers/video/omap/lcd_omap2evm.c +++ /dev/null @@ -1,192 +0,0 @@ -/* - * LCD panel support for the MISTRAL OMAP2EVM board - * - * Author: Arun C - * - * Derived from drivers/video/omap/lcd_omap3evm.c - * Derived from drivers/video/omap/lcd-apollon.c - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. - */ - -#include -#include -#include -#include - -#include -#include - -#include "omapfb.h" - -#define LCD_PANEL_ENABLE_GPIO 154 -#define LCD_PANEL_LR 128 -#define LCD_PANEL_UD 129 -#define LCD_PANEL_INI 152 -#define LCD_PANEL_QVGA 148 -#define LCD_PANEL_RESB 153 - -#define TWL_LED_LEDEN 0x00 -#define TWL_PWMA_PWMAON 0x00 -#define TWL_PWMA_PWMAOFF 0x01 - -static unsigned int bklight_level; - -static int omap2evm_panel_init(struct lcd_panel *panel, - struct omapfb_device *fbdev) -{ - gpio_request(LCD_PANEL_ENABLE_GPIO, "LCD enable"); - gpio_request(LCD_PANEL_LR, "LCD lr"); - gpio_request(LCD_PANEL_UD, "LCD ud"); - gpio_request(LCD_PANEL_INI, "LCD ini"); - gpio_request(LCD_PANEL_QVGA, "LCD qvga"); - gpio_request(LCD_PANEL_RESB, "LCD resb"); - - gpio_direction_output(LCD_PANEL_ENABLE_GPIO, 1); - gpio_direction_output(LCD_PANEL_RESB, 1); - gpio_direction_output(LCD_PANEL_INI, 1); - gpio_direction_output(LCD_PANEL_QVGA, 0); - gpio_direction_output(LCD_PANEL_LR, 1); - gpio_direction_output(LCD_PANEL_UD, 1); - - twl_i2c_write_u8(TWL4030_MODULE_LED, 0x11, TWL_LED_LEDEN); - twl_i2c_write_u8(TWL4030_MODULE_PWMA, 0x01, TWL_PWMA_PWMAON); - twl_i2c_write_u8(TWL4030_MODULE_PWMA, 0x02, TWL_PWMA_PWMAOFF); - bklight_level = 100; - - return 0; -} - -static void omap2evm_panel_cleanup(struct lcd_panel *panel) -{ - gpio_free(LCD_PANEL_RESB); - gpio_free(LCD_PANEL_QVGA); - gpio_free(LCD_PANEL_INI); - gpio_free(LCD_PANEL_UD); - gpio_free(LCD_PANEL_LR); - gpio_free(LCD_PANEL_ENABLE_GPIO); -} - -static int omap2evm_panel_enable(struct lcd_panel *panel) -{ - gpio_set_value(LCD_PANEL_ENABLE_GPIO, 0); - return 0; -} - -static void omap2evm_panel_disable(struct lcd_panel *panel) -{ - gpio_set_value(LCD_PANEL_ENABLE_GPIO, 1); -} - -static unsigned long omap2evm_panel_get_caps(struct lcd_panel *panel) -{ - return 0; -} - -static int omap2evm_bklight_setlevel(struct lcd_panel *panel, - unsigned int level) -{ - u8 c; - if ((level >= 0) && (level <= 100)) { - c = (125 * (100 - level)) / 100 + 2; - twl_i2c_write_u8(TWL4030_MODULE_PWMA, c, TWL_PWMA_PWMAOFF); - bklight_level = level; - } - return 0; -} - -static unsigned int omap2evm_bklight_getlevel(struct lcd_panel *panel) -{ - return bklight_level; -} - -static unsigned int omap2evm_bklight_getmaxlevel(struct lcd_panel *panel) -{ - return 100; -} - -struct lcd_panel omap2evm_panel = { - .name = "omap2evm", - .config = OMAP_LCDC_PANEL_TFT | OMAP_LCDC_INV_VSYNC | - OMAP_LCDC_INV_HSYNC, - - .bpp = 16, - .data_lines = 18, - .x_res = 480, - .y_res = 640, - .hsw = 3, - .hfp = 0, - .hbp = 28, - .vsw = 2, - .vfp = 1, - .vbp = 0, - - .pixel_clock = 20000, - - .init = omap2evm_panel_init, - .cleanup = omap2evm_panel_cleanup, - .enable = omap2evm_panel_enable, - .disable = omap2evm_panel_disable, - .get_caps = omap2evm_panel_get_caps, - .set_bklight_level = omap2evm_bklight_setlevel, - .get_bklight_level = omap2evm_bklight_getlevel, - .get_bklight_max = omap2evm_bklight_getmaxlevel, -}; - -static int omap2evm_panel_probe(struct platform_device *pdev) -{ - omapfb_register_panel(&omap2evm_panel); - return 0; -} - -static int omap2evm_panel_remove(struct platform_device *pdev) -{ - return 0; -} - -static int omap2evm_panel_suspend(struct platform_device *pdev, - pm_message_t mesg) -{ - return 0; -} - -static int omap2evm_panel_resume(struct platform_device *pdev) -{ - return 0; -} - -struct platform_driver omap2evm_panel_driver = { - .probe = omap2evm_panel_probe, - .remove = omap2evm_panel_remove, - .suspend = omap2evm_panel_suspend, - .resume = omap2evm_panel_resume, - .driver = { - .name = "omap2evm_lcd", - .owner = THIS_MODULE, - }, -}; - -static int __init omap2evm_panel_drv_init(void) -{ - return platform_driver_register(&omap2evm_panel_driver); -} - -static void __exit omap2evm_panel_drv_exit(void) -{ - platform_driver_unregister(&omap2evm_panel_driver); -} - -module_init(omap2evm_panel_drv_init); -module_exit(omap2evm_panel_drv_exit); diff --git a/sound/soc/omap/Kconfig b/sound/soc/omap/Kconfig index b592298..99054cf 100644 --- a/sound/soc/omap/Kconfig +++ b/sound/soc/omap/Kconfig @@ -65,14 +65,6 @@ config SND_OMAP_SOC_OVERO Say Y if you want to add support for SoC audio on the Gumstix Overo or CompuLab CM-T35 -config SND_OMAP_SOC_OMAP2EVM - tristate "SoC Audio support for OMAP2EVM board" - depends on TWL4030_CORE && SND_OMAP_SOC && MACH_OMAP2EVM - select SND_OMAP_SOC_MCBSP - select SND_SOC_TWL4030 - help - Say Y if you want to add support for SoC audio on the omap2evm board. - config SND_OMAP_SOC_OMAP3EVM tristate "SoC Audio support for OMAP3EVM board" depends on TWL4030_CORE && SND_OMAP_SOC && MACH_OMAP3EVM diff --git a/sound/soc/omap/Makefile b/sound/soc/omap/Makefile index ba9fc65..6c2c87e 100644 --- a/sound/soc/omap/Makefile +++ b/sound/soc/omap/Makefile @@ -13,7 +13,6 @@ snd-soc-rx51-objs := rx51.o snd-soc-ams-delta-objs := ams-delta.o snd-soc-osk5912-objs := osk5912.o snd-soc-overo-objs := overo.o -snd-soc-omap2evm-objs := omap2evm.o snd-soc-omap3evm-objs := omap3evm.o snd-soc-am3517evm-objs := am3517evm.o snd-soc-sdp3430-objs := sdp3430.o diff --git a/sound/soc/omap/omap2evm.c b/sound/soc/omap/omap2evm.c deleted file mode 100644 index 29b60d6..0000000 --- a/sound/soc/omap/omap2evm.c +++ /dev/null @@ -1,139 +0,0 @@ -/* - * omap2evm.c -- SoC audio machine driver for omap2evm board - * - * Author: Arun KS - * - * Based on sound/soc/omap/overo.c by Steve Sakoman - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA - * 02110-1301 USA - * - */ - -#include -#include -#include -#include -#include - -#include -#include -#include -#include - -#include "omap-mcbsp.h" -#include "omap-pcm.h" - -static int omap2evm_hw_params(struct snd_pcm_substream *substream, - struct snd_pcm_hw_params *params) -{ - struct snd_soc_pcm_runtime *rtd = substream->private_data; - struct snd_soc_dai *codec_dai = rtd->codec_dai; - struct snd_soc_dai *cpu_dai = rtd->cpu_dai; - int ret; - - /* Set codec DAI configuration */ - ret = snd_soc_dai_set_fmt(codec_dai, - SND_SOC_DAIFMT_I2S | - SND_SOC_DAIFMT_NB_NF | - SND_SOC_DAIFMT_CBM_CFM); - if (ret < 0) { - printk(KERN_ERR "can't set codec DAI configuration\n"); - return ret; - } - - /* Set cpu DAI configuration */ - ret = snd_soc_dai_set_fmt(cpu_dai, - SND_SOC_DAIFMT_I2S | - SND_SOC_DAIFMT_NB_NF | - SND_SOC_DAIFMT_CBM_CFM); - if (ret < 0) { - printk(KERN_ERR "can't set cpu DAI configuration\n"); - return ret; - } - - /* Set the codec system clock for DAC and ADC */ - ret = snd_soc_dai_set_sysclk(codec_dai, 0, 26000000, - SND_SOC_CLOCK_IN); - if (ret < 0) { - printk(KERN_ERR "can't set codec system clock\n"); - return ret; - } - - return 0; -} - -static struct snd_soc_ops omap2evm_ops = { - .hw_params = omap2evm_hw_params, -}; - -/* Digital audio interface glue - connects codec <--> CPU */ -static struct snd_soc_dai_link omap2evm_dai = { - .name = "TWL4030", - .stream_name = "TWL4030", - .cpu_dai_name = "omap-mcbsp-dai.1", - .codec_dai_name = "twl4030-hifi", - .platform_name = "omap-pcm-audio", - .codec_name = "twl4030-codec", - .ops = &omap2evm_ops, -}; - -/* Audio machine driver */ -static struct snd_soc_card snd_soc_omap2evm = { - .name = "omap2evm", - .dai_link = &omap2evm_dai, - .num_links = 1, -}; - -static struct platform_device *omap2evm_snd_device; - -static int __init omap2evm_soc_init(void) -{ - int ret; - - if (!machine_is_omap2evm()) - return -ENODEV; - printk(KERN_INFO "omap2evm SoC init\n"); - - omap2evm_snd_device = platform_device_alloc("soc-audio", -1); - if (!omap2evm_snd_device) { - printk(KERN_ERR "Platform device allocation failed\n"); - return -ENOMEM; - } - - platform_set_drvdata(omap2evm_snd_device, &snd_soc_omap2evm); - - ret = platform_device_add(omap2evm_snd_device); - if (ret) - goto err1; - - return 0; - -err1: - printk(KERN_ERR "Unable to add platform device\n"); - platform_device_put(omap2evm_snd_device); - - return ret; -} -module_init(omap2evm_soc_init); - -static void __exit omap2evm_soc_exit(void) -{ - platform_device_unregister(omap2evm_snd_device); -} -module_exit(omap2evm_soc_exit); - -MODULE_AUTHOR("Arun KS "); -MODULE_DESCRIPTION("ALSA SoC omap2evm"); -MODULE_LICENSE("GPL"); -- cgit v0.10.2 From fdfb03ba375e34b8aaee22a501eb59c92b43726b Mon Sep 17 00:00:00 2001 From: Mike Rapoport Date: Thu, 12 May 2011 21:31:01 +0000 Subject: omap: igep0020: name refactoring for future merge with IGEP3 IGEP2 and IGEP3 boards are very similar and can be merged into one file. Start refactoring with changing igep2 to igep where applicable. Signed-off-by: Mike Rapoport Acked-by: Enric Balletbo i Serra Signed-off-by: Tony Lindgren diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c index c62c297..ad20f7b 100644 --- a/arch/arm/mach-omap2/board-igep0020.c +++ b/arch/arm/mach-omap2/board-igep0020.c @@ -112,7 +112,7 @@ static void __init igep2_get_revision(void) * So MTD regards it as 4KiB page size and 256KiB block size 64*(2*2048) */ -static struct mtd_partition igep2_onenand_partitions[] = { +static struct mtd_partition igep_onenand_partitions[] = { { .name = "X-Loader", .offset = 0, @@ -140,21 +140,21 @@ static struct mtd_partition igep2_onenand_partitions[] = { }, }; -static struct omap_onenand_platform_data igep2_onenand_data = { - .parts = igep2_onenand_partitions, - .nr_parts = ARRAY_SIZE(igep2_onenand_partitions), +static struct omap_onenand_platform_data igep_onenand_data = { + .parts = igep_onenand_partitions, + .nr_parts = ARRAY_SIZE(igep_onenand_partitions), .dma_channel = -1, /* disable DMA in OMAP OneNAND driver */ }; -static struct platform_device igep2_onenand_device = { +static struct platform_device igep_onenand_device = { .name = "omap2-onenand", .id = -1, .dev = { - .platform_data = &igep2_onenand_data, + .platform_data = &igep_onenand_data, }, }; -static void __init igep2_flash_init(void) +static void __init igep_flash_init(void) { u8 cs = 0; u8 onenandcs = GPMC_CS_NUM + 1; @@ -166,7 +166,7 @@ static void __init igep2_flash_init(void) /* Check if NAND/oneNAND is configured */ if ((ret & 0xC00) == 0x800) /* NAND found */ - pr_err("IGEP2: Unsupported NAND found\n"); + pr_err("IGEP: Unsupported NAND found\n"); else { ret = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG7); if ((ret & 0x3F) == (ONENAND_MAP >> 24)) @@ -176,18 +176,18 @@ static void __init igep2_flash_init(void) } if (onenandcs > GPMC_CS_NUM) { - pr_err("IGEP2: Unable to find configuration in GPMC\n"); + pr_err("IGEP: Unable to find configuration in GPMC\n"); return; } - igep2_onenand_data.cs = onenandcs; + igep_onenand_data.cs = onenandcs; - if (platform_device_register(&igep2_onenand_device) < 0) - pr_err("IGEP2: Unable to register OneNAND device\n"); + if (platform_device_register(&igep_onenand_device) < 0) + pr_err("IGEP: Unable to register OneNAND device\n"); } #else -static void __init igep2_flash_init(void) {} +static void __init igep_flash_init(void) {} #endif #if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE) @@ -211,11 +211,11 @@ static inline void __init igep2_init_smsc911x(void) static inline void __init igep2_init_smsc911x(void) { } #endif -static struct regulator_consumer_supply igep2_vmmc1_supply = +static struct regulator_consumer_supply igep_vmmc1_supply = REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"); /* VMMC1 for OMAP VDD_MMC1 (i/o) and MMC1 card */ -static struct regulator_init_data igep2_vmmc1 = { +static struct regulator_init_data igep_vmmc1 = { .constraints = { .min_uV = 1850000, .max_uV = 3150000, @@ -226,13 +226,13 @@ static struct regulator_init_data igep2_vmmc1 = { | REGULATOR_CHANGE_STATUS, }, .num_consumer_supplies = 1, - .consumer_supplies = &igep2_vmmc1_supply, + .consumer_supplies = &igep_vmmc1_supply, }; -static struct regulator_consumer_supply igep2_vio_supply = +static struct regulator_consumer_supply igep_vio_supply = REGULATOR_SUPPLY("vmmc_aux", "omap_hsmmc.1"); -static struct regulator_init_data igep2_vio = { +static struct regulator_init_data igep_vio = { .constraints = { .min_uV = 1800000, .max_uV = 1800000, @@ -244,34 +244,34 @@ static struct regulator_init_data igep2_vio = { | REGULATOR_CHANGE_STATUS, }, .num_consumer_supplies = 1, - .consumer_supplies = &igep2_vio_supply, + .consumer_supplies = &igep_vio_supply, }; -static struct regulator_consumer_supply igep2_vmmc2_supply = +static struct regulator_consumer_supply igep_vmmc2_supply = REGULATOR_SUPPLY("vmmc", "omap_hsmmc.1"); -static struct regulator_init_data igep2_vmmc2 = { +static struct regulator_init_data igep_vmmc2 = { .constraints = { .valid_modes_mask = REGULATOR_MODE_NORMAL, .always_on = 1, }, .num_consumer_supplies = 1, - .consumer_supplies = &igep2_vmmc2_supply, + .consumer_supplies = &igep_vmmc2_supply, }; -static struct fixed_voltage_config igep2_vwlan = { +static struct fixed_voltage_config igep_vwlan = { .supply_name = "vwlan", .microvolts = 3300000, .gpio = -EINVAL, .enabled_at_boot = 1, - .init_data = &igep2_vmmc2, + .init_data = &igep_vmmc2, }; -static struct platform_device igep2_vwlan_device = { +static struct platform_device igep_vwlan_device = { .name = "reg-fixed-voltage", .id = 0, .dev = { - .platform_data = &igep2_vwlan, + .platform_data = &igep_vwlan, }, }; @@ -296,7 +296,7 @@ static struct omap2_hsmmc_info mmc[] = { #if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE) #include -static struct gpio_led igep2_gpio_leds[] = { +static struct gpio_led igep_gpio_leds[] = { [0] = { .name = "gpio-led:red:d0", .gpio = IGEP2_GPIO_LED0_RED, @@ -320,34 +320,34 @@ static struct gpio_led igep2_gpio_leds[] = { }, }; -static struct gpio_led_platform_data igep2_led_pdata = { - .leds = igep2_gpio_leds, - .num_leds = ARRAY_SIZE(igep2_gpio_leds), +static struct gpio_led_platform_data igep_led_pdata = { + .leds = igep_gpio_leds, + .num_leds = ARRAY_SIZE(igep_gpio_leds), }; -static struct platform_device igep2_led_device = { +static struct platform_device igep_led_device = { .name = "leds-gpio", .id = -1, .dev = { - .platform_data = &igep2_led_pdata, + .platform_data = &igep_led_pdata, }, }; -static void __init igep2_leds_init(void) +static void __init igep_leds_init(void) { - platform_device_register(&igep2_led_device); + platform_device_register(&igep_led_device); } #else -static struct gpio igep2_gpio_leds[] __initdata = { +static struct gpio igep_gpio_leds[] __initdata = { { IGEP2_GPIO_LED0_RED, GPIOF_OUT_INIT_LOW, "gpio-led:red:d0" }, { IGEP2_GPIO_LED0_GREEN, GPIOF_OUT_INIT_LOW, "gpio-led:green:d0" }, { IGEP2_GPIO_LED1_RED, GPIOF_OUT_INIT_LOW, "gpio-led:red:d1" }, }; -static inline void igep2_leds_init(void) +static inline void igep_leds_init(void) { - if (gpio_request_array(igep2_gpio_leds, ARRAY_SIZE(igep2_gpio_leds))) { + if (gpio_request_array(igep_gpio_leds, ARRAY_SIZE(igep_gpio_leds))) { pr_warning("IGEP v2: Could not obtain leds gpios\n"); return; } @@ -363,7 +363,7 @@ static struct gpio igep2_twl_gpios[] = { { -EINVAL, GPIOF_OUT_INIT_LOW, "GPIO_USBH_CPEN" }, }; -static int igep2_twl_gpio_setup(struct device *dev, +static int igep_twl_gpio_setup(struct device *dev, unsigned gpio, unsigned ngpio) { int ret; @@ -392,23 +392,23 @@ static int igep2_twl_gpio_setup(struct device *dev, if (ret == 0) gpio_export(gpio + TWL4030_GPIO_MAX + 1, 0); else - pr_warning("IGEP v2: Could not obtain gpio GPIO_LED1_GREEN\n"); + pr_warning("IGEP: Could not obtain gpio GPIO_LED1_GREEN\n"); #else - igep2_gpio_leds[3].gpio = gpio + TWL4030_GPIO_MAX + 1; + igep_gpio_leds[3].gpio = gpio + TWL4030_GPIO_MAX + 1; #endif return 0; }; -static struct twl4030_gpio_platform_data igep2_twl4030_gpio_pdata = { +static struct twl4030_gpio_platform_data igep_twl4030_gpio_pdata = { .gpio_base = OMAP_MAX_GPIO_LINES, .irq_base = TWL4030_GPIO_IRQ_BASE, .irq_end = TWL4030_GPIO_IRQ_END, .use_leds = true, - .setup = igep2_twl_gpio_setup, + .setup = igep_twl_gpio_setup, }; -static struct twl4030_usb_data igep2_usb_data = { +static struct twl4030_usb_data igep_usb_data = { .usb_mode = T2_USB_MODE_ULPI, }; @@ -476,11 +476,11 @@ static void __init igep2_display_init(void) pr_err("IGEP v2: Could not obtain gpio GPIO_DVI_PUP\n"); } -static struct platform_device *igep2_devices[] __initdata = { - &igep2_vwlan_device, +static struct platform_device *igep_devices[] __initdata = { + &igep_vwlan_device, }; -static void __init igep2_init_early(void) +static void __init igep_init_early(void) { omap2_init_common_infrastructure(); omap2_init_common_devices(m65kxxxxam_sdrc_params, @@ -525,18 +525,18 @@ static struct twl4030_keypad_data igep2_keypad_pdata = { .rep = 1, }; -static struct twl4030_platform_data igep2_twldata = { +static struct twl4030_platform_data igep_twldata = { .irq_base = TWL4030_IRQ_BASE, .irq_end = TWL4030_IRQ_END, /* platform_data for children goes here */ - .usb = &igep2_usb_data, + .usb = &igep_usb_data, .codec = &igep2_codec_data, - .gpio = &igep2_twl4030_gpio_pdata, + .gpio = &igep_twl4030_gpio_pdata, .keypad = &igep2_keypad_pdata, - .vmmc1 = &igep2_vmmc1, + .vmmc1 = &igep_vmmc1, .vpll2 = &igep2_vpll2, - .vio = &igep2_vio, + .vio = &igep_vio, }; static struct i2c_board_info __initdata igep2_i2c3_boardinfo[] = { @@ -545,11 +545,11 @@ static struct i2c_board_info __initdata igep2_i2c3_boardinfo[] = { }, }; -static void __init igep2_i2c_init(void) +static void __init igep_i2c_init(void) { int ret; - omap3_pmic_init("twl4030", &igep2_twldata); + omap3_pmic_init("twl4030", &igep_twldata); /* * Bus 3 is attached to the DVI port where devices like the pico DLP @@ -561,7 +561,7 @@ static void __init igep2_i2c_init(void) pr_warning("IGEP2: Could not register I2C3 bus (%d)\n", ret); } -static const struct usbhs_omap_board_data usbhs_bdata __initconst = { +static const struct usbhs_omap_board_data igep2_usbhs_bdata __initconst = { .port_mode[0] = OMAP_EHCI_PORT_MODE_PHY, .port_mode[1] = OMAP_USBHS_PORT_MODE_UNUSED, .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED, @@ -579,64 +579,64 @@ static struct omap_board_mux board_mux[] __initdata = { #endif #if defined(CONFIG_LIBERTAS_SDIO) || defined(CONFIG_LIBERTAS_SDIO_MODULE) -static struct gpio igep2_wlan_bt_gpios[] __initdata = { +static struct gpio igep_wlan_bt_gpios[] __initdata = { { -EINVAL, GPIOF_OUT_INIT_HIGH, "GPIO_WIFI_NPD" }, { -EINVAL, GPIOF_OUT_INIT_HIGH, "GPIO_WIFI_NRESET" }, { -EINVAL, GPIOF_OUT_INIT_HIGH, "GPIO_BT_NRESET" }, }; -static void __init igep2_wlan_bt_init(void) +static void __init igep_wlan_bt_init(void) { int err; /* GPIO's for WLAN-BT combo depends on hardware revision */ if (hwrev == IGEP2_BOARD_HWREV_B) { - igep2_wlan_bt_gpios[0].gpio = IGEP2_RB_GPIO_WIFI_NPD; - igep2_wlan_bt_gpios[1].gpio = IGEP2_RB_GPIO_WIFI_NRESET; - igep2_wlan_bt_gpios[2].gpio = IGEP2_RB_GPIO_BT_NRESET; + igep_wlan_bt_gpios[0].gpio = IGEP2_RB_GPIO_WIFI_NPD; + igep_wlan_bt_gpios[1].gpio = IGEP2_RB_GPIO_WIFI_NRESET; + igep_wlan_bt_gpios[2].gpio = IGEP2_RB_GPIO_BT_NRESET; } else if (hwrev == IGEP2_BOARD_HWREV_C) { - igep2_wlan_bt_gpios[0].gpio = IGEP2_RC_GPIO_WIFI_NPD; - igep2_wlan_bt_gpios[1].gpio = IGEP2_RC_GPIO_WIFI_NRESET; - igep2_wlan_bt_gpios[2].gpio = IGEP2_RC_GPIO_BT_NRESET; + igep_wlan_bt_gpios[0].gpio = IGEP2_RC_GPIO_WIFI_NPD; + igep_wlan_bt_gpios[1].gpio = IGEP2_RC_GPIO_WIFI_NRESET; + igep_wlan_bt_gpios[2].gpio = IGEP2_RC_GPIO_BT_NRESET; } else return; - err = gpio_request_array(igep2_wlan_bt_gpios, - ARRAY_SIZE(igep2_wlan_bt_gpios)); + err = gpio_request_array(igep_wlan_bt_gpios, + ARRAY_SIZE(igep_wlan_bt_gpios)); if (err) { pr_warning("IGEP2: Could not obtain WIFI/BT gpios\n"); return; } - gpio_export(igep2_wlan_bt_gpios[0].gpio, 0); - gpio_export(igep2_wlan_bt_gpios[1].gpio, 0); - gpio_export(igep2_wlan_bt_gpios[2].gpio, 0); + gpio_export(igep_wlan_bt_gpios[0].gpio, 0); + gpio_export(igep_wlan_bt_gpios[1].gpio, 0); + gpio_export(igep_wlan_bt_gpios[2].gpio, 0); - gpio_set_value(igep2_wlan_bt_gpios[1].gpio, 0); + gpio_set_value(igep_wlan_bt_gpios[1].gpio, 0); udelay(10); - gpio_set_value(igep2_wlan_bt_gpios[1].gpio, 1); + gpio_set_value(igep_wlan_bt_gpios[1].gpio, 1); } #else -static inline void __init igep2_wlan_bt_init(void) { } +static inline void __init igep_wlan_bt_init(void) { } #endif -static void __init igep2_init(void) +static void __init igep_init(void) { omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); /* Get IGEP2 hardware revision */ igep2_get_revision(); /* Register I2C busses and drivers */ - igep2_i2c_init(); - platform_add_devices(igep2_devices, ARRAY_SIZE(igep2_devices)); + igep_i2c_init(); + platform_add_devices(igep_devices, ARRAY_SIZE(igep_devices)); omap_display_init(&igep2_dss_data); omap_serial_init(); usb_musb_init(NULL); - usbhs_init(&usbhs_bdata); + usbhs_init(&igep2_usbhs_bdata); - igep2_flash_init(); - igep2_leds_init(); + igep_flash_init(); + igep_leds_init(); igep2_display_init(); igep2_init_smsc911x(); @@ -644,7 +644,7 @@ static void __init igep2_init(void) * WLAN-BT combo module from MuRata which has a Marvell WLAN * (88W8686) + CSR Bluetooth chipset. Uses SDIO interface. */ - igep2_wlan_bt_init(); + igep_wlan_bt_init(); } @@ -652,8 +652,8 @@ MACHINE_START(IGEP0020, "IGEP v2 board") .boot_params = 0x80000100, .reserve = omap_reserve, .map_io = omap3_map_io, - .init_early = igep2_init_early, + .init_early = igep_init_early, .init_irq = omap_init_irq, - .init_machine = igep2_init, + .init_machine = igep_init, .timer = &omap_timer, MACHINE_END -- cgit v0.10.2 From 0d4ab9a58ff6d29e84b6f29a5084323f0374ef6a Mon Sep 17 00:00:00 2001 From: Mike Rapoport Date: Thu, 12 May 2011 21:31:02 +0000 Subject: omap: igep0020: minor refactoring to allow easy addition of IGEP3 Signed-off-by: Mike Rapoport Acked-by: Enric Balletbo i Serra Signed-off-by: Tony Lindgren diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c index ad20f7b..ea7cbc6 100644 --- a/arch/arm/mach-omap2/board-igep0020.c +++ b/arch/arm/mach-omap2/board-igep0020.c @@ -299,17 +299,14 @@ static struct omap2_hsmmc_info mmc[] = { static struct gpio_led igep_gpio_leds[] = { [0] = { .name = "gpio-led:red:d0", - .gpio = IGEP2_GPIO_LED0_RED, .default_trigger = "default-off" }, [1] = { .name = "gpio-led:green:d0", - .gpio = IGEP2_GPIO_LED0_GREEN, .default_trigger = "default-off", }, [2] = { .name = "gpio-led:red:d1", - .gpio = IGEP2_GPIO_LED1_RED, .default_trigger = "default-off", }, [3] = { @@ -335,6 +332,10 @@ static struct platform_device igep_led_device = { static void __init igep_leds_init(void) { + igep_gpio_leds[0].gpio = IGEP2_GPIO_LED0_RED; + igep_gpio_leds[1].gpio = IGEP2_GPIO_LED0_GREEN; + igep_gpio_leds[2].gpio = IGEP2_GPIO_LED1_RED; + platform_device_register(&igep_led_device); } @@ -347,14 +348,15 @@ static struct gpio igep_gpio_leds[] __initdata = { static inline void igep_leds_init(void) { + int i; + if (gpio_request_array(igep_gpio_leds, ARRAY_SIZE(igep_gpio_leds))) { pr_warning("IGEP v2: Could not obtain leds gpios\n"); return; } - gpio_export(IGEP2_GPIO_LED0_RED, 0); - gpio_export(IGEP2_GPIO_LED0_GREEN, 0); - gpio_export(IGEP2_GPIO_LED1_RED, 0); + for (i = 0; i < ARRAY_SIZE(igep_gpio_leds); i++) + gpio_export(igep_gpio_leds[i].gpio, 0); } #endif @@ -372,6 +374,18 @@ static int igep_twl_gpio_setup(struct device *dev, mmc[0].gpio_cd = gpio + 0; omap2_hsmmc_init(mmc); + /* TWL4030_GPIO_MAX + 1 == ledB (out, active low LED) */ +#if !defined(CONFIG_LEDS_GPIO) && !defined(CONFIG_LEDS_GPIO_MODULE) + ret = gpio_request_one(gpio + TWL4030_GPIO_MAX + 1, GPIOF_OUT_INIT_HIGH, + "gpio-led:green:d1"); + if (ret == 0) + gpio_export(gpio + TWL4030_GPIO_MAX + 1, 0); + else + pr_warning("IGEP: Could not obtain gpio GPIO_LED1_GREEN\n"); +#else + igep_gpio_leds[3].gpio = gpio + TWL4030_GPIO_MAX + 1; +#endif + /* * REVISIT: need ehci-omap hooks for external VBUS * power switch and overcurrent detect @@ -385,18 +399,6 @@ static int igep_twl_gpio_setup(struct device *dev, if (ret < 0) pr_err("IGEP2: Could not obtain gpio for USBH_CPEN"); - /* TWL4030_GPIO_MAX + 1 == ledB (out, active low LED) */ -#if !defined(CONFIG_LEDS_GPIO) && !defined(CONFIG_LEDS_GPIO_MODULE) - ret = gpio_request_one(gpio + TWL4030_GPIO_MAX + 1, GPIOF_OUT_INIT_HIGH, - "gpio-led:green:d1"); - if (ret == 0) - gpio_export(gpio + TWL4030_GPIO_MAX + 1, 0); - else - pr_warning("IGEP: Could not obtain gpio GPIO_LED1_GREEN\n"); -#else - igep_gpio_leds[3].gpio = gpio + TWL4030_GPIO_MAX + 1; -#endif - return 0; }; @@ -531,11 +533,8 @@ static struct twl4030_platform_data igep_twldata = { /* platform_data for children goes here */ .usb = &igep_usb_data, - .codec = &igep2_codec_data, .gpio = &igep_twl4030_gpio_pdata, - .keypad = &igep2_keypad_pdata, .vmmc1 = &igep_vmmc1, - .vpll2 = &igep2_vpll2, .vio = &igep_vio, }; @@ -549,8 +548,6 @@ static void __init igep_i2c_init(void) { int ret; - omap3_pmic_init("twl4030", &igep_twldata); - /* * Bus 3 is attached to the DVI port where devices like the pico DLP * projector don't work reliably with 400kHz @@ -559,6 +556,12 @@ static void __init igep_i2c_init(void) ARRAY_SIZE(igep2_i2c3_boardinfo)); if (ret) pr_warning("IGEP2: Could not register I2C3 bus (%d)\n", ret); + + igep_twldata.codec = &igep2_codec_data; + igep_twldata.keypad = &igep2_keypad_pdata; + igep_twldata.vpll2 = &igep2_vpll2; + + omap3_pmic_init("twl4030", &igep_twldata); } static const struct usbhs_omap_board_data igep2_usbhs_bdata __initconst = { @@ -630,15 +633,11 @@ static void __init igep_init(void) /* Register I2C busses and drivers */ igep_i2c_init(); platform_add_devices(igep_devices, ARRAY_SIZE(igep_devices)); - omap_display_init(&igep2_dss_data); omap_serial_init(); usb_musb_init(NULL); - usbhs_init(&igep2_usbhs_bdata); igep_flash_init(); igep_leds_init(); - igep2_display_init(); - igep2_init_smsc911x(); /* * WLAN-BT combo module from MuRata which has a Marvell WLAN @@ -646,6 +645,10 @@ static void __init igep_init(void) */ igep_wlan_bt_init(); + omap_display_init(&igep2_dss_data); + igep2_display_init(); + igep2_init_smsc911x(); + usbhs_init(&igep2_usbhs_bdata); } MACHINE_START(IGEP0020, "IGEP v2 board") -- cgit v0.10.2 From 2a60997a538cf60a3b5ebcfa2b9909c868e7aa20 Mon Sep 17 00:00:00 2001 From: Mike Rapoport Date: Thu, 12 May 2011 21:31:03 +0000 Subject: omap: igep0020: add support for IGEP3 Add IGEP3 machine support to board-igep0020 Signed-off-by: Mike Rapoport Acked-by: Enric Balletbo i Serra Signed-off-by: Tony Lindgren diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c index ea7cbc6..0d6d583 100644 --- a/arch/arm/mach-omap2/board-igep0020.c +++ b/arch/arm/mach-omap2/board-igep0020.c @@ -55,6 +55,11 @@ #define IGEP2_RC_GPIO_WIFI_NRESET 139 #define IGEP2_RC_GPIO_BT_NRESET 137 +#define IGEP3_GPIO_LED0_GREEN 54 +#define IGEP3_GPIO_LED0_RED 53 +#define IGEP3_GPIO_LED1_RED 16 +#define IGEP3_GPIO_USBH_NRESET 183 + /* * IGEP2 Hardware Revision Table * @@ -69,6 +74,7 @@ #define IGEP2_BOARD_HWREV_B 0 #define IGEP2_BOARD_HWREV_C 1 +#define IGEP3_BOARD_HWREV 2 static u8 hwrev; @@ -76,6 +82,11 @@ static void __init igep2_get_revision(void) { u8 ret; + if (machine_is_igep0030()) { + hwrev = IGEP3_BOARD_HWREV; + return; + } + omap_mux_init_gpio(IGEP2_GPIO_LED1_RED, OMAP_PIN_INPUT); if (gpio_request_one(IGEP2_GPIO_LED1_RED, GPIOF_IN, "GPIO_HW0_REV")) { @@ -332,24 +343,40 @@ static struct platform_device igep_led_device = { static void __init igep_leds_init(void) { - igep_gpio_leds[0].gpio = IGEP2_GPIO_LED0_RED; - igep_gpio_leds[1].gpio = IGEP2_GPIO_LED0_GREEN; - igep_gpio_leds[2].gpio = IGEP2_GPIO_LED1_RED; + if (machine_is_igep0020()) { + igep_gpio_leds[0].gpio = IGEP2_GPIO_LED0_RED; + igep_gpio_leds[1].gpio = IGEP2_GPIO_LED0_GREEN; + igep_gpio_leds[2].gpio = IGEP2_GPIO_LED1_RED; + } else { + igep_gpio_leds[0].gpio = IGEP3_GPIO_LED0_RED; + igep_gpio_leds[1].gpio = IGEP3_GPIO_LED0_GREEN; + igep_gpio_leds[2].gpio = IGEP3_GPIO_LED1_RED; + } platform_device_register(&igep_led_device); } #else static struct gpio igep_gpio_leds[] __initdata = { - { IGEP2_GPIO_LED0_RED, GPIOF_OUT_INIT_LOW, "gpio-led:red:d0" }, - { IGEP2_GPIO_LED0_GREEN, GPIOF_OUT_INIT_LOW, "gpio-led:green:d0" }, - { IGEP2_GPIO_LED1_RED, GPIOF_OUT_INIT_LOW, "gpio-led:red:d1" }, + { -EINVAL, GPIOF_OUT_INIT_LOW, "gpio-led:red:d0" }, + { -EINVAL, GPIOF_OUT_INIT_LOW, "gpio-led:green:d0" }, + { -EINVAL, GPIOF_OUT_INIT_LOW, "gpio-led:red:d1" }, }; static inline void igep_leds_init(void) { int i; + if (machine_is_igep0020()) { + igep_gpio_leds[0].gpio = IGEP2_GPIO_LED0_RED; + igep_gpio_leds[1].gpio = IGEP2_GPIO_LED0_GREEN; + igep_gpio_leds[2].gpio = IGEP2_GPIO_LED1_RED; + } else { + igep_gpio_leds[0].gpio = IGEP3_GPIO_LED0_RED; + igep_gpio_leds[1].gpio = IGEP3_GPIO_LED0_GREEN; + igep_gpio_leds[2].gpio = IGEP3_GPIO_LED1_RED; + } + if (gpio_request_array(igep_gpio_leds, ARRAY_SIZE(igep_gpio_leds))) { pr_warning("IGEP v2: Could not obtain leds gpios\n"); return; @@ -386,6 +413,9 @@ static int igep_twl_gpio_setup(struct device *dev, igep_gpio_leds[3].gpio = gpio + TWL4030_GPIO_MAX + 1; #endif + if (machine_is_igep0030()) + return 0; + /* * REVISIT: need ehci-omap hooks for external VBUS * power switch and overcurrent detect @@ -548,18 +578,20 @@ static void __init igep_i2c_init(void) { int ret; - /* - * Bus 3 is attached to the DVI port where devices like the pico DLP - * projector don't work reliably with 400kHz - */ - ret = omap_register_i2c_bus(3, 100, igep2_i2c3_boardinfo, - ARRAY_SIZE(igep2_i2c3_boardinfo)); - if (ret) - pr_warning("IGEP2: Could not register I2C3 bus (%d)\n", ret); - - igep_twldata.codec = &igep2_codec_data; - igep_twldata.keypad = &igep2_keypad_pdata; - igep_twldata.vpll2 = &igep2_vpll2; + if (machine_is_igep0020()) { + /* + * Bus 3 is attached to the DVI port where devices like the + * pico DLP projector don't work reliably with 400kHz + */ + ret = omap_register_i2c_bus(3, 100, igep2_i2c3_boardinfo, + ARRAY_SIZE(igep2_i2c3_boardinfo)); + if (ret) + pr_warning("IGEP2: Could not register I2C3 bus (%d)\n", ret); + + igep_twldata.codec = &igep2_codec_data; + igep_twldata.keypad = &igep2_keypad_pdata; + igep_twldata.vpll2 = &igep2_vpll2; + } omap3_pmic_init("twl4030", &igep_twldata); } @@ -575,6 +607,17 @@ static const struct usbhs_omap_board_data igep2_usbhs_bdata __initconst = { .reset_gpio_port[2] = -EINVAL, }; +static const struct usbhs_omap_board_data igep3_usbhs_bdata __initconst = { + .port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED, + .port_mode[1] = OMAP_EHCI_PORT_MODE_PHY, + .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED, + + .phy_reset = true, + .reset_gpio_port[0] = -EINVAL, + .reset_gpio_port[1] = IGEP3_GPIO_USBH_NRESET, + .reset_gpio_port[2] = -EINVAL, +}; + #ifdef CONFIG_OMAP_MUX static struct omap_board_mux board_mux[] __initdata = { { .reg_offset = OMAP_MUX_TERMINATOR }, @@ -597,7 +640,7 @@ static void __init igep_wlan_bt_init(void) igep_wlan_bt_gpios[0].gpio = IGEP2_RB_GPIO_WIFI_NPD; igep_wlan_bt_gpios[1].gpio = IGEP2_RB_GPIO_WIFI_NRESET; igep_wlan_bt_gpios[2].gpio = IGEP2_RB_GPIO_BT_NRESET; - } else if (hwrev == IGEP2_BOARD_HWREV_C) { + } else if (hwrev == IGEP2_BOARD_HWREV_C || machine_is_igep0030()) { igep_wlan_bt_gpios[0].gpio = IGEP2_RC_GPIO_WIFI_NPD; igep_wlan_bt_gpios[1].gpio = IGEP2_RC_GPIO_WIFI_NRESET; igep_wlan_bt_gpios[2].gpio = IGEP2_RC_GPIO_BT_NRESET; @@ -645,10 +688,14 @@ static void __init igep_init(void) */ igep_wlan_bt_init(); - omap_display_init(&igep2_dss_data); - igep2_display_init(); - igep2_init_smsc911x(); - usbhs_init(&igep2_usbhs_bdata); + if (machine_is_igep0020()) { + omap_display_init(&igep2_dss_data); + igep2_display_init(); + igep2_init_smsc911x(); + usbhs_init(&igep2_usbhs_bdata); + } else { + usbhs_init(&igep3_usbhs_bdata); + } } MACHINE_START(IGEP0020, "IGEP v2 board") @@ -660,3 +707,13 @@ MACHINE_START(IGEP0020, "IGEP v2 board") .init_machine = igep_init, .timer = &omap_timer, MACHINE_END + +MACHINE_START(IGEP0030, "IGEP OMAP3 module") + .boot_params = 0x80000100, + .reserve = omap_reserve, + .map_io = omap3_map_io, + .init_early = igep_init_early, + .init_irq = omap_init_irq, + .init_machine = igep_init, + .timer = &omap_timer, +MACHINE_END -- cgit v0.10.2 From 7be13ad0ce518c03cf4852f69e8a9746be2edb03 Mon Sep 17 00:00:00 2001 From: Mike Rapoport Date: Thu, 12 May 2011 21:31:04 +0000 Subject: omap: drop board-igep0030.c since it is merged into board-igep0020.c Signed-off-by: Mike Rapoport Signed-off-by: Tony Lindgren diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index b997a358..19d5891 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -288,6 +288,7 @@ config MACH_IGEP0030 depends on ARCH_OMAP3 default y select OMAP_PACKAGE_CBB + select MACH_IGEP0020 config MACH_SBC3530 bool "OMAP3 SBC STALKER board" diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile index a0c2cae..186f482 100644 --- a/arch/arm/mach-omap2/Makefile +++ b/arch/arm/mach-omap2/Makefile @@ -229,8 +229,6 @@ obj-$(CONFIG_MACH_CM_T35) += board-cm-t35.o \ obj-$(CONFIG_MACH_CM_T3517) += board-cm-t3517.o obj-$(CONFIG_MACH_IGEP0020) += board-igep0020.o \ hsmmc.o -obj-$(CONFIG_MACH_IGEP0030) += board-igep0030.o \ - hsmmc.o obj-$(CONFIG_MACH_OMAP3_TOUCHBOOK) += board-omap3touchbook.o \ hsmmc.o obj-$(CONFIG_MACH_OMAP_4430SDP) += board-4430sdp.o \ diff --git a/arch/arm/mach-omap2/board-igep0030.c b/arch/arm/mach-omap2/board-igep0030.c deleted file mode 100644 index 83f6be2..0000000 --- a/arch/arm/mach-omap2/board-igep0030.c +++ /dev/null @@ -1,438 +0,0 @@ -/* - * Copyright (C) 2010 - ISEE 2007 SL - * - * Modified from mach-omap2/board-generic.c - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include - -#include -#include - -#include -#include -#include -#include -#include - -#include "mux.h" -#include "hsmmc.h" -#include "sdram-numonyx-m65kxxxxam.h" -#include "common-board-devices.h" - -#define IGEP3_GPIO_LED0_GREEN 54 -#define IGEP3_GPIO_LED0_RED 53 -#define IGEP3_GPIO_LED1_RED 16 - -#define IGEP3_GPIO_WIFI_NPD 138 -#define IGEP3_GPIO_WIFI_NRESET 139 -#define IGEP3_GPIO_BT_NRESET 137 - -#define IGEP3_GPIO_USBH_NRESET 183 - - -#if defined(CONFIG_MTD_ONENAND_OMAP2) || \ - defined(CONFIG_MTD_ONENAND_OMAP2_MODULE) - -#define ONENAND_MAP 0x20000000 - -/* - * x2 Flash built-in COMBO POP MEMORY - * Since the device is equipped with two DataRAMs, and two-plane NAND - * Flash memory array, these two component enables simultaneous program - * of 4KiB. Plane1 has only even blocks such as block0, block2, block4 - * while Plane2 has only odd blocks such as block1, block3, block5. - * So MTD regards it as 4KiB page size and 256KiB block size 64*(2*2048) - */ - -static struct mtd_partition igep3_onenand_partitions[] = { - { - .name = "X-Loader", - .offset = 0, - .size = 2 * (64*(2*2048)) - }, - { - .name = "U-Boot", - .offset = MTDPART_OFS_APPEND, - .size = 6 * (64*(2*2048)), - }, - { - .name = "Environment", - .offset = MTDPART_OFS_APPEND, - .size = 2 * (64*(2*2048)), - }, - { - .name = "Kernel", - .offset = MTDPART_OFS_APPEND, - .size = 12 * (64*(2*2048)), - }, - { - .name = "File System", - .offset = MTDPART_OFS_APPEND, - .size = MTDPART_SIZ_FULL, - }, -}; - -static struct omap_onenand_platform_data igep3_onenand_pdata = { - .parts = igep3_onenand_partitions, - .nr_parts = ARRAY_SIZE(igep3_onenand_partitions), - .onenand_setup = NULL, - .dma_channel = -1, /* disable DMA in OMAP OneNAND driver */ -}; - -static struct platform_device igep3_onenand_device = { - .name = "omap2-onenand", - .id = -1, - .dev = { - .platform_data = &igep3_onenand_pdata, - }, -}; - -static void __init igep3_flash_init(void) -{ - u8 cs = 0; - u8 onenandcs = GPMC_CS_NUM + 1; - - for (cs = 0; cs < GPMC_CS_NUM; cs++) { - u32 ret; - ret = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG1); - - /* Check if NAND/oneNAND is configured */ - if ((ret & 0xC00) == 0x800) - /* NAND found */ - pr_err("IGEP3: Unsupported NAND found\n"); - else { - ret = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG7); - - if ((ret & 0x3F) == (ONENAND_MAP >> 24)) - /* OneNAND found */ - onenandcs = cs; - } - } - - if (onenandcs > GPMC_CS_NUM) { - pr_err("IGEP3: Unable to find configuration in GPMC\n"); - return; - } - - igep3_onenand_pdata.cs = onenandcs; - - if (platform_device_register(&igep3_onenand_device) < 0) - pr_err("IGEP3: Unable to register OneNAND device\n"); -} - -#else -static void __init igep3_flash_init(void) {} -#endif - -static struct regulator_consumer_supply igep3_vmmc1_supply = - REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"); - -/* VMMC1 for OMAP VDD_MMC1 (i/o) and MMC1 card */ -static struct regulator_init_data igep3_vmmc1 = { - .constraints = { - .min_uV = 1850000, - .max_uV = 3150000, - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE - | REGULATOR_CHANGE_MODE - | REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = 1, - .consumer_supplies = &igep3_vmmc1_supply, -}; - -static struct regulator_consumer_supply igep3_vio_supply = - REGULATOR_SUPPLY("vmmc_aux", "omap_hsmmc.1"); - -static struct regulator_init_data igep3_vio = { - .constraints = { - .min_uV = 1800000, - .max_uV = 1800000, - .apply_uV = 1, - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE - | REGULATOR_CHANGE_MODE - | REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = 1, - .consumer_supplies = &igep3_vio_supply, -}; - -static struct regulator_consumer_supply igep3_vmmc2_supply = - REGULATOR_SUPPLY("vmmc", "omap_hsmmc.1"); - -static struct regulator_init_data igep3_vmmc2 = { - .constraints = { - .valid_modes_mask = REGULATOR_MODE_NORMAL, - .always_on = 1, - }, - .num_consumer_supplies = 1, - .consumer_supplies = &igep3_vmmc2_supply, -}; - -static struct fixed_voltage_config igep3_vwlan = { - .supply_name = "vwlan", - .microvolts = 3300000, - .gpio = -EINVAL, - .enabled_at_boot = 1, - .init_data = &igep3_vmmc2, -}; - -static struct platform_device igep3_vwlan_device = { - .name = "reg-fixed-voltage", - .id = 0, - .dev = { - .platform_data = &igep3_vwlan, - }, -}; - -static struct omap2_hsmmc_info mmc[] = { - [0] = { - .mmc = 1, - .caps = MMC_CAP_4_BIT_DATA, - .gpio_cd = -EINVAL, - .gpio_wp = -EINVAL, - }, -#if defined(CONFIG_LIBERTAS_SDIO) || defined(CONFIG_LIBERTAS_SDIO_MODULE) - [1] = { - .mmc = 2, - .caps = MMC_CAP_4_BIT_DATA, - .gpio_cd = -EINVAL, - .gpio_wp = -EINVAL, - }, -#endif - {} /* Terminator */ -}; - -#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE) -#include - -static struct gpio_led igep3_gpio_leds[] = { - [0] = { - .name = "gpio-led:red:d0", - .gpio = IGEP3_GPIO_LED0_RED, - .default_trigger = "default-off" - }, - [1] = { - .name = "gpio-led:green:d0", - .gpio = IGEP3_GPIO_LED0_GREEN, - .default_trigger = "default-off", - }, - [2] = { - .name = "gpio-led:red:d1", - .gpio = IGEP3_GPIO_LED1_RED, - .default_trigger = "default-off", - }, - [3] = { - .name = "gpio-led:green:d1", - .default_trigger = "heartbeat", - .gpio = -EINVAL, /* gets replaced */ - }, -}; - -static struct gpio_led_platform_data igep3_led_pdata = { - .leds = igep3_gpio_leds, - .num_leds = ARRAY_SIZE(igep3_gpio_leds), -}; - -static struct platform_device igep3_led_device = { - .name = "leds-gpio", - .id = -1, - .dev = { - .platform_data = &igep3_led_pdata, - }, -}; - -static void __init igep3_leds_init(void) -{ - platform_device_register(&igep3_led_device); -} - -#else -static struct gpio igep3_gpio_leds[] __initdata = { - { IGEP3_GPIO_LED0_RED, GPIOF_OUT_INIT_HIGH, "gpio-led:red:d0" }, - { IGEP3_GPIO_LED0_GREEN, GPIOF_OUT_INIT_HIGH, "gpio-led:green:d0" }, - { IGEP3_GPIO_LED1_RED, GPIOF_OUT_INIT_HIGH, "gpio-led:red:d1" }, -}; - -static inline void igep3_leds_init(void) -{ - if (gpio_request_array(igep3_gpio_leds, ARRAY_SIZE(igep3_gpio_leds))) { - pr_warning("IGEP3: Could not obtain leds gpios\n"); - return; - } - gpio_export(IGEP3_GPIO_LED0_RED, 0); - gpio_export(IGEP3_GPIO_LED0_GREEN, 0); - gpio_export(IGEP3_GPIO_LED1_RED, 0); -} -#endif - -static int igep3_twl4030_gpio_setup(struct device *dev, - unsigned gpio, unsigned ngpio) -{ -#if !defined(CONFIG_LEDS_GPIO) && !defined(CONFIG_LEDS_GPIO_MODULE) - int ret; - - /* TWL4030_GPIO_MAX + 1 == ledB (out, active low LED) */ - ret = gpio_request_one(gpio + TWL4030_GPIO_MAX + 1, GPIOF_OUT_INIT_HIGH, - "gpio-led:green:d1"); - if (ret) - pr_warning("IGEP3: Could not obtain gpio GPIO_LED1_GREEN\n"); - else - gpio_export(gpio + TWL4030_GPIO_MAX + 1, 0); -#else - igep3_gpio_leds[3].gpio = gpio + TWL4030_GPIO_MAX + 1; -#endif - /* gpio + 0 is "mmc0_cd" (input/IRQ) */ - mmc[0].gpio_cd = gpio + 0; - omap2_hsmmc_init(mmc); - - return 0; -}; - -static struct twl4030_gpio_platform_data igep3_twl4030_gpio_pdata = { - .gpio_base = OMAP_MAX_GPIO_LINES, - .irq_base = TWL4030_GPIO_IRQ_BASE, - .irq_end = TWL4030_GPIO_IRQ_END, - .use_leds = true, - .setup = igep3_twl4030_gpio_setup, -}; - -static struct twl4030_usb_data igep3_twl4030_usb_data = { - .usb_mode = T2_USB_MODE_ULPI, -}; - -static struct platform_device *igep3_devices[] __initdata = { - &igep3_vwlan_device, -}; - -static void __init igep3_init_early(void) -{ - omap2_init_common_infrastructure(); - omap2_init_common_devices(m65kxxxxam_sdrc_params, - m65kxxxxam_sdrc_params); -} - -static struct twl4030_platform_data igep3_twl4030_pdata = { - .irq_base = TWL4030_IRQ_BASE, - .irq_end = TWL4030_IRQ_END, - - /* platform_data for children goes here */ - .usb = &igep3_twl4030_usb_data, - .gpio = &igep3_twl4030_gpio_pdata, - .vmmc1 = &igep3_vmmc1, - .vio = &igep3_vio, -}; - -static int __init igep3_i2c_init(void) -{ - omap3_pmic_init("twl4030", &igep3_twl4030_pdata); - - return 0; -} - -#if defined(CONFIG_LIBERTAS_SDIO) || defined(CONFIG_LIBERTAS_SDIO_MODULE) -static struct gpio igep3_wlan_bt_gpios[] __initdata = { - { IGEP3_GPIO_WIFI_NPD, GPIOF_OUT_INIT_HIGH, "GPIO_WIFI_NPD" }, - { IGEP3_GPIO_WIFI_NRESET, GPIOF_OUT_INIT_HIGH, "GPIO_WIFI_NRESET" }, - { IGEP3_GPIO_BT_NRESET, GPIOF_OUT_INIT_HIGH, "GPIO_BT_NRESET" }, -}; - -static void __init igep3_wifi_bt_init(void) -{ - int err; - - /* Configure MUX values for W-LAN + Bluetooth GPIO's */ - omap_mux_init_gpio(IGEP3_GPIO_WIFI_NPD, OMAP_PIN_OUTPUT); - omap_mux_init_gpio(IGEP3_GPIO_WIFI_NRESET, OMAP_PIN_OUTPUT); - omap_mux_init_gpio(IGEP3_GPIO_BT_NRESET, OMAP_PIN_OUTPUT); - - /* Set GPIO's for W-LAN + Bluetooth combo module */ - err = gpio_request_array(igep3_wlan_bt_gpios, - ARRAY_SIZE(igep3_wlan_bt_gpios)); - if (err) { - pr_warning("IGEP3: Could not obtain WIFI/BT gpios\n"); - return; - } - - gpio_export(IGEP3_GPIO_WIFI_NPD, 0); - gpio_export(IGEP3_GPIO_WIFI_NRESET, 0); - gpio_export(IGEP3_GPIO_BT_NRESET, 0); - - gpio_set_value(IGEP3_GPIO_WIFI_NRESET, 0); - udelay(10); - gpio_set_value(IGEP3_GPIO_WIFI_NRESET, 1); -} -#else -void __init igep3_wifi_bt_init(void) {} -#endif - -static const struct usbhs_omap_board_data usbhs_bdata __initconst = { - .port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED, - .port_mode[1] = OMAP_EHCI_PORT_MODE_PHY, - .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED, - - .phy_reset = true, - .reset_gpio_port[0] = -EINVAL, - .reset_gpio_port[1] = IGEP3_GPIO_USBH_NRESET, - .reset_gpio_port[2] = -EINVAL, -}; - -#ifdef CONFIG_OMAP_MUX -static struct omap_board_mux board_mux[] __initdata = { - OMAP3_MUX(I2C2_SDA, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT), - { .reg_offset = OMAP_MUX_TERMINATOR }, -}; -#endif - -static void __init igep3_init(void) -{ - omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); - - /* Register I2C busses and drivers */ - igep3_i2c_init(); - platform_add_devices(igep3_devices, ARRAY_SIZE(igep3_devices)); - omap_serial_init(); - usb_musb_init(NULL); - usbhs_init(&usbhs_bdata); - - igep3_flash_init(); - igep3_leds_init(); - - /* - * WLAN-BT combo module from MuRata which has a Marvell WLAN - * (88W8686) + CSR Bluetooth chipset. Uses SDIO interface. - */ - igep3_wifi_bt_init(); - -} - -MACHINE_START(IGEP0030, "IGEP OMAP3 module") - .boot_params = 0x80000100, - .reserve = omap_reserve, - .map_io = omap3_map_io, - .init_early = igep3_init_early, - .init_irq = omap_init_irq, - .init_machine = igep3_init, - .timer = &omap_timer, -MACHINE_END -- cgit v0.10.2 From 1f15848807c20762017da29fa1dac64fb67b8128 Mon Sep 17 00:00:00 2001 From: Hema HK Date: Mon, 28 Feb 2011 14:19:35 +0530 Subject: usb: musb: OMAP4430: Power down the PHY during board init Powerdown the internal PHY during board init for OMAP44xx. So that when musb is disabled core transition to retention/off is not blocked. Signed-off-by: Hema HK Cc: Tony Lindgren Cc: Paul Walmsley Signed-off-by: Felipe Balbi diff --git a/arch/arm/mach-omap2/usb-musb.c b/arch/arm/mach-omap2/usb-musb.c index 35559f7..f665ade 100644 --- a/arch/arm/mach-omap2/usb-musb.c +++ b/arch/arm/mach-omap2/usb-musb.c @@ -117,11 +117,6 @@ void __init usb_musb_init(struct omap_musb_board_data *board_data) int bus_id = -1; const char *oh_name, *name; - if (cpu_is_omap3517() || cpu_is_omap3505()) { - } else if (cpu_is_omap44xx()) { - usb_musb_mux_init(board_data); - } - /* * REVISIT: This line can be removed once all the platforms using * musb_core.c have been converted to use use clkdev. @@ -164,6 +159,9 @@ void __init usb_musb_init(struct omap_musb_board_data *board_data) dev->dma_mask = &musb_dmamask; dev->coherent_dma_mask = musb_dmamask; put_device(dev); + + if (cpu_is_omap44xx()) + omap4430_phy_init(dev); } #else -- cgit v0.10.2 From a6d28523dbe6dc5bf3fc6a9078a69de6873c511e Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Mon, 2 May 2011 12:45:05 +0300 Subject: usb: musb: am35x: fix compile error when building am35x am35x_musb_set_mode() was redefined. Fix it. Reported-by: Sebastian Andrzej Siewior Signed-off-by: Felipe Balbi diff --git a/arch/arm/mach-omap2/board-am3517evm.c b/arch/arm/mach-omap2/board-am3517evm.c index ce7d5e6..d8a0484 100644 --- a/arch/arm/mach-omap2/board-am3517evm.c +++ b/arch/arm/mach-omap2/board-am3517evm.c @@ -396,7 +396,7 @@ static struct omap_musb_board_data musb_board_data = { .power = 500, .set_phy_power = am35x_musb_phy_power, .clear_irq = am35x_musb_clear_irq, - .set_mode = am35x_musb_set_mode, + .set_mode = am35x_set_mode, .reset = am35x_musb_reset, }; diff --git a/arch/arm/mach-omap2/omap_phy_internal.c b/arch/arm/mach-omap2/omap_phy_internal.c index 05f6abc..eff6e24 100644 --- a/arch/arm/mach-omap2/omap_phy_internal.c +++ b/arch/arm/mach-omap2/omap_phy_internal.c @@ -228,7 +228,7 @@ void am35x_musb_clear_irq(void) regval = omap_ctrl_readl(AM35XX_CONTROL_LVL_INTR_CLEAR); } -void am35x_musb_set_mode(u8 musb_mode) +void am35x_set_mode(u8 musb_mode) { u32 devconf2 = omap_ctrl_readl(AM35XX_CONTROL_DEVCONF2); diff --git a/arch/arm/plat-omap/include/plat/usb.h b/arch/arm/plat-omap/include/plat/usb.h index 02b96c8..17d3c93 100644 --- a/arch/arm/plat-omap/include/plat/usb.h +++ b/arch/arm/plat-omap/include/plat/usb.h @@ -113,7 +113,7 @@ extern int omap4430_phy_suspend(struct device *dev, int suspend); extern void am35x_musb_reset(void); extern void am35x_musb_phy_power(u8 on); extern void am35x_musb_clear_irq(void); -extern void am35x_musb_set_mode(u8 musb_mode); +extern void am35x_set_mode(u8 musb_mode); /* * FIXME correct answer depends on hmc_mode, -- cgit v0.10.2 From 8cfc67f0740cede2a6aec94b8513285d00c46d5f Mon Sep 17 00:00:00 2001 From: Hema HK Date: Thu, 24 Mar 2011 17:08:42 +0530 Subject: usb: otg: OMAP4430: Fixing the omap4430_phy_init function omap4430_phy_init() function can be called with no device pointer, to powerdown the PHY during board init when USB is disabled. Fix the function accordingly. Signed-off-by: Hema HK Signed-off-by: Felipe Balbi diff --git a/arch/arm/mach-omap2/omap_phy_internal.c b/arch/arm/mach-omap2/omap_phy_internal.c index eff6e24..f47813e 100644 --- a/arch/arm/mach-omap2/omap_phy_internal.c +++ b/arch/arm/mach-omap2/omap_phy_internal.c @@ -50,13 +50,16 @@ int omap4430_phy_init(struct device *dev) { ctrl_base = ioremap(OMAP443X_SCM_BASE, SZ_1K); if (!ctrl_base) { - dev_err(dev, "control module ioremap failed\n"); + pr_err("control module ioremap failed\n"); return -ENOMEM; } /* Power down the phy */ __raw_writel(PHY_PD, ctrl_base + CONTROL_DEV_CONF); - phyclk = clk_get(dev, "ocp2scp_usb_phy_ick"); + if (!dev) + return 0; + + phyclk = clk_get(dev, "ocp2scp_usb_phy_ick"); if (IS_ERR(phyclk)) { dev_err(dev, "cannot clk_get ocp2scp_usb_phy_ick\n"); iounmap(ctrl_base); -- cgit v0.10.2 From 208466dc10083e734a8af71d10f923ee4bff950c Mon Sep 17 00:00:00 2001 From: Hema HK Date: Thu, 24 Mar 2011 17:09:03 +0530 Subject: usb: otg: OMAP4430: Powerdown the internal PHY when USB is disabled Powerdown the internal UTMI PHY when USB is not enabled. This will allow the OMAP core domain to transition to retention and offmode. Signed-off-by: Hema HK Cc: Felipe Balbi Signed-off-by: Felipe Balbi diff --git a/arch/arm/mach-omap2/usb-musb.c b/arch/arm/mach-omap2/usb-musb.c index f665ade..fd95e62 100644 --- a/arch/arm/mach-omap2/usb-musb.c +++ b/arch/arm/mach-omap2/usb-musb.c @@ -167,5 +167,7 @@ void __init usb_musb_init(struct omap_musb_board_data *board_data) #else void __init usb_musb_init(struct omap_musb_board_data *board_data) { + if (cpu_is_omap44xx()) + omap4430_phy_init(NULL); } #endif /* CONFIG_USB_MUSB_SOC */ -- cgit v0.10.2 From 90d231f7673e20acc4f8b5c3effb5c12098179a7 Mon Sep 17 00:00:00 2001 From: Jean Pihet Date: Fri, 29 Apr 2011 11:26:22 +0200 Subject: OMAP3 cpuidle: remove useless SDP specific timings The cpuidle states settings can be overriden by some board- specific settings, by calling omap3_pm_init_cpuidle. Remove the 3430SDP specific states settings registration since the figures are identical to the default ones (in cpuidle34xx.c). Signed-off-by: Jean Pihet Signed-off-by: Kevin Hilman diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c index 9afd087..7ffad7b 100644 --- a/arch/arm/mach-omap2/board-3430sdp.c +++ b/arch/arm/mach-omap2/board-3430sdp.c @@ -59,24 +59,6 @@ #define TWL4030_MSECURE_GPIO 22 -/* FIXME: These values need to be updated based on more profiling on 3430sdp*/ -static struct cpuidle_params omap3_cpuidle_params_table[] = { - /* C1 */ - {1, 2, 2, 5}, - /* C2 */ - {1, 10, 10, 30}, - /* C3 */ - {1, 50, 50, 300}, - /* C4 */ - {1, 1500, 1800, 4000}, - /* C5 */ - {1, 2500, 7500, 12000}, - /* C6 */ - {1, 3000, 8500, 15000}, - /* C7 */ - {1, 10000, 30000, 300000}, -}; - static uint32_t board_keymap[] = { KEY(0, 0, KEY_LEFT), KEY(0, 1, KEY_RIGHT), @@ -883,7 +865,6 @@ static void __init omap_3430sdp_init(void) omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); omap_board_config = sdp3430_config; omap_board_config_size = ARRAY_SIZE(sdp3430_config); - omap3_pm_init_cpuidle(omap3_cpuidle_params_table); omap3430_i2c_init(); omap_display_init(&sdp3430_dss_data); if (omap_rev() > OMAP3430_REV_ES1_0) -- cgit v0.10.2 From 866ba0ef967c693dae952afafcb1582a390a82a0 Mon Sep 17 00:00:00 2001 From: Jean Pihet Date: Mon, 9 May 2011 12:02:13 +0200 Subject: OMAP3: clean-up mach specific cpuidle data structures - sleep_latency and wake_latency are not used, replace them by exit_latency which is used by cpuidle. exit_latency simply is the sum of sleep_latency and wake_latency, - replace threshold by target_residency, - changed the OMAP3 specific cpuidle code accordingly, - changed the OMAP3 board code accordingly. Signed-off-by: Jean Pihet Signed-off-by: Kevin Hilman diff --git a/arch/arm/mach-omap2/board-rx51.c b/arch/arm/mach-omap2/board-rx51.c index f8ba20a..fec4cac 100644 --- a/arch/arm/mach-omap2/board-rx51.c +++ b/arch/arm/mach-omap2/board-rx51.c @@ -58,21 +58,25 @@ static struct platform_device leds_gpio = { }, }; +/* + * cpuidle C-states definition override from the default values. + * The 'exit_latency' field is the sum of sleep and wake-up latencies. + */ static struct cpuidle_params rx51_cpuidle_params[] = { /* C1 */ - {1, 110, 162, 5}, + {110 + 162, 5 , 1}, /* C2 */ - {1, 106, 180, 309}, + {106 + 180, 309, 1}, /* C3 */ - {0, 107, 410, 46057}, + {107 + 410, 46057, 0}, /* C4 */ - {0, 121, 3374, 46057}, + {121 + 3374, 46057, 0}, /* C5 */ - {1, 855, 1146, 46057}, + {855 + 1146, 46057, 1}, /* C6 */ - {0, 7580, 4134, 484329}, + {7580 + 4134, 484329, 0}, /* C7 */ - {1, 7505, 15274, 484329}, + {7505 + 15274, 484329, 1}, }; static struct omap_lcd_config rx51_lcd_config = { diff --git a/arch/arm/mach-omap2/cpuidle34xx.c b/arch/arm/mach-omap2/cpuidle34xx.c index 1c240ef..d7bc31a 100644 --- a/arch/arm/mach-omap2/cpuidle34xx.c +++ b/arch/arm/mach-omap2/cpuidle34xx.c @@ -52,11 +52,10 @@ struct omap3_processor_cx { u8 valid; u8 type; - u32 sleep_latency; - u32 wakeup_latency; + u32 exit_latency; u32 mpu_state; u32 core_state; - u32 threshold; + u32 target_residency; u32 flags; const char *desc; }; @@ -75,19 +74,19 @@ struct powerdomain *cam_pd; */ static struct cpuidle_params cpuidle_params_table[] = { /* C1 */ - {1, 2, 2, 5}, + {2 + 2, 5, 1}, /* C2 */ - {1, 10, 10, 30}, + {10 + 10, 30, 1}, /* C3 */ - {1, 50, 50, 300}, + {50 + 50, 300, 1}, /* C4 */ - {1, 1500, 1800, 4000}, + {1500 + 1800, 4000, 1}, /* C5 */ - {1, 2500, 7500, 12000}, + {2500 + 7500, 12000, 1}, /* C6 */ - {1, 3000, 8500, 15000}, + {3000 + 8500, 15000, 1}, /* C7 */ - {1, 10000, 30000, 300000}, + {10000 + 30000, 300000, 1}, }; static int omap3_idle_bm_check(void) @@ -330,12 +329,10 @@ void omap3_pm_init_cpuidle(struct cpuidle_params *cpuidle_board_params) for (i = OMAP3_STATE_C1; i < OMAP3_MAX_STATES; i++) { cpuidle_params_table[i].valid = cpuidle_board_params[i].valid; - cpuidle_params_table[i].sleep_latency = - cpuidle_board_params[i].sleep_latency; - cpuidle_params_table[i].wake_latency = - cpuidle_board_params[i].wake_latency; - cpuidle_params_table[i].threshold = - cpuidle_board_params[i].threshold; + cpuidle_params_table[i].exit_latency = + cpuidle_board_params[i].exit_latency; + cpuidle_params_table[i].target_residency = + cpuidle_board_params[i].target_residency; } return; } @@ -357,12 +354,10 @@ void omap_init_power_states(void) omap3_power_states[OMAP3_STATE_C1].valid = cpuidle_params_table[OMAP3_STATE_C1].valid; omap3_power_states[OMAP3_STATE_C1].type = OMAP3_STATE_C1; - omap3_power_states[OMAP3_STATE_C1].sleep_latency = - cpuidle_params_table[OMAP3_STATE_C1].sleep_latency; - omap3_power_states[OMAP3_STATE_C1].wakeup_latency = - cpuidle_params_table[OMAP3_STATE_C1].wake_latency; - omap3_power_states[OMAP3_STATE_C1].threshold = - cpuidle_params_table[OMAP3_STATE_C1].threshold; + omap3_power_states[OMAP3_STATE_C1].exit_latency = + cpuidle_params_table[OMAP3_STATE_C1].exit_latency; + omap3_power_states[OMAP3_STATE_C1].target_residency = + cpuidle_params_table[OMAP3_STATE_C1].target_residency; omap3_power_states[OMAP3_STATE_C1].mpu_state = PWRDM_POWER_ON; omap3_power_states[OMAP3_STATE_C1].core_state = PWRDM_POWER_ON; omap3_power_states[OMAP3_STATE_C1].flags = CPUIDLE_FLAG_TIME_VALID; @@ -372,12 +367,10 @@ void omap_init_power_states(void) omap3_power_states[OMAP3_STATE_C2].valid = cpuidle_params_table[OMAP3_STATE_C2].valid; omap3_power_states[OMAP3_STATE_C2].type = OMAP3_STATE_C2; - omap3_power_states[OMAP3_STATE_C2].sleep_latency = - cpuidle_params_table[OMAP3_STATE_C2].sleep_latency; - omap3_power_states[OMAP3_STATE_C2].wakeup_latency = - cpuidle_params_table[OMAP3_STATE_C2].wake_latency; - omap3_power_states[OMAP3_STATE_C2].threshold = - cpuidle_params_table[OMAP3_STATE_C2].threshold; + omap3_power_states[OMAP3_STATE_C2].exit_latency = + cpuidle_params_table[OMAP3_STATE_C2].exit_latency; + omap3_power_states[OMAP3_STATE_C2].target_residency = + cpuidle_params_table[OMAP3_STATE_C2].target_residency; omap3_power_states[OMAP3_STATE_C2].mpu_state = PWRDM_POWER_ON; omap3_power_states[OMAP3_STATE_C2].core_state = PWRDM_POWER_ON; omap3_power_states[OMAP3_STATE_C2].flags = CPUIDLE_FLAG_TIME_VALID | @@ -388,12 +381,10 @@ void omap_init_power_states(void) omap3_power_states[OMAP3_STATE_C3].valid = cpuidle_params_table[OMAP3_STATE_C3].valid; omap3_power_states[OMAP3_STATE_C3].type = OMAP3_STATE_C3; - omap3_power_states[OMAP3_STATE_C3].sleep_latency = - cpuidle_params_table[OMAP3_STATE_C3].sleep_latency; - omap3_power_states[OMAP3_STATE_C3].wakeup_latency = - cpuidle_params_table[OMAP3_STATE_C3].wake_latency; - omap3_power_states[OMAP3_STATE_C3].threshold = - cpuidle_params_table[OMAP3_STATE_C3].threshold; + omap3_power_states[OMAP3_STATE_C3].exit_latency = + cpuidle_params_table[OMAP3_STATE_C3].exit_latency; + omap3_power_states[OMAP3_STATE_C3].target_residency = + cpuidle_params_table[OMAP3_STATE_C3].target_residency; omap3_power_states[OMAP3_STATE_C3].mpu_state = PWRDM_POWER_RET; omap3_power_states[OMAP3_STATE_C3].core_state = PWRDM_POWER_ON; omap3_power_states[OMAP3_STATE_C3].flags = CPUIDLE_FLAG_TIME_VALID | @@ -404,12 +395,10 @@ void omap_init_power_states(void) omap3_power_states[OMAP3_STATE_C4].valid = cpuidle_params_table[OMAP3_STATE_C4].valid; omap3_power_states[OMAP3_STATE_C4].type = OMAP3_STATE_C4; - omap3_power_states[OMAP3_STATE_C4].sleep_latency = - cpuidle_params_table[OMAP3_STATE_C4].sleep_latency; - omap3_power_states[OMAP3_STATE_C4].wakeup_latency = - cpuidle_params_table[OMAP3_STATE_C4].wake_latency; - omap3_power_states[OMAP3_STATE_C4].threshold = - cpuidle_params_table[OMAP3_STATE_C4].threshold; + omap3_power_states[OMAP3_STATE_C4].exit_latency = + cpuidle_params_table[OMAP3_STATE_C4].exit_latency; + omap3_power_states[OMAP3_STATE_C4].target_residency = + cpuidle_params_table[OMAP3_STATE_C4].target_residency; omap3_power_states[OMAP3_STATE_C4].mpu_state = PWRDM_POWER_OFF; omap3_power_states[OMAP3_STATE_C4].core_state = PWRDM_POWER_ON; omap3_power_states[OMAP3_STATE_C4].flags = CPUIDLE_FLAG_TIME_VALID | @@ -420,12 +409,10 @@ void omap_init_power_states(void) omap3_power_states[OMAP3_STATE_C5].valid = cpuidle_params_table[OMAP3_STATE_C5].valid; omap3_power_states[OMAP3_STATE_C5].type = OMAP3_STATE_C5; - omap3_power_states[OMAP3_STATE_C5].sleep_latency = - cpuidle_params_table[OMAP3_STATE_C5].sleep_latency; - omap3_power_states[OMAP3_STATE_C5].wakeup_latency = - cpuidle_params_table[OMAP3_STATE_C5].wake_latency; - omap3_power_states[OMAP3_STATE_C5].threshold = - cpuidle_params_table[OMAP3_STATE_C5].threshold; + omap3_power_states[OMAP3_STATE_C5].exit_latency = + cpuidle_params_table[OMAP3_STATE_C5].exit_latency; + omap3_power_states[OMAP3_STATE_C5].target_residency = + cpuidle_params_table[OMAP3_STATE_C5].target_residency; omap3_power_states[OMAP3_STATE_C5].mpu_state = PWRDM_POWER_RET; omap3_power_states[OMAP3_STATE_C5].core_state = PWRDM_POWER_RET; omap3_power_states[OMAP3_STATE_C5].flags = CPUIDLE_FLAG_TIME_VALID | @@ -436,12 +423,10 @@ void omap_init_power_states(void) omap3_power_states[OMAP3_STATE_C6].valid = cpuidle_params_table[OMAP3_STATE_C6].valid; omap3_power_states[OMAP3_STATE_C6].type = OMAP3_STATE_C6; - omap3_power_states[OMAP3_STATE_C6].sleep_latency = - cpuidle_params_table[OMAP3_STATE_C6].sleep_latency; - omap3_power_states[OMAP3_STATE_C6].wakeup_latency = - cpuidle_params_table[OMAP3_STATE_C6].wake_latency; - omap3_power_states[OMAP3_STATE_C6].threshold = - cpuidle_params_table[OMAP3_STATE_C6].threshold; + omap3_power_states[OMAP3_STATE_C6].exit_latency = + cpuidle_params_table[OMAP3_STATE_C6].exit_latency; + omap3_power_states[OMAP3_STATE_C6].target_residency = + cpuidle_params_table[OMAP3_STATE_C6].target_residency; omap3_power_states[OMAP3_STATE_C6].mpu_state = PWRDM_POWER_OFF; omap3_power_states[OMAP3_STATE_C6].core_state = PWRDM_POWER_RET; omap3_power_states[OMAP3_STATE_C6].flags = CPUIDLE_FLAG_TIME_VALID | @@ -452,12 +437,10 @@ void omap_init_power_states(void) omap3_power_states[OMAP3_STATE_C7].valid = cpuidle_params_table[OMAP3_STATE_C7].valid; omap3_power_states[OMAP3_STATE_C7].type = OMAP3_STATE_C7; - omap3_power_states[OMAP3_STATE_C7].sleep_latency = - cpuidle_params_table[OMAP3_STATE_C7].sleep_latency; - omap3_power_states[OMAP3_STATE_C7].wakeup_latency = - cpuidle_params_table[OMAP3_STATE_C7].wake_latency; - omap3_power_states[OMAP3_STATE_C7].threshold = - cpuidle_params_table[OMAP3_STATE_C7].threshold; + omap3_power_states[OMAP3_STATE_C7].exit_latency = + cpuidle_params_table[OMAP3_STATE_C7].exit_latency; + omap3_power_states[OMAP3_STATE_C7].target_residency = + cpuidle_params_table[OMAP3_STATE_C7].target_residency; omap3_power_states[OMAP3_STATE_C7].mpu_state = PWRDM_POWER_OFF; omap3_power_states[OMAP3_STATE_C7].core_state = PWRDM_POWER_OFF; omap3_power_states[OMAP3_STATE_C7].flags = CPUIDLE_FLAG_TIME_VALID | @@ -512,8 +495,8 @@ int __init omap3_idle_init(void) if (!cx->valid) continue; cpuidle_set_statedata(state, cx); - state->exit_latency = cx->sleep_latency + cx->wakeup_latency; - state->target_residency = cx->threshold; + state->exit_latency = cx->exit_latency; + state->target_residency = cx->target_residency; state->flags = cx->flags; state->enter = (state->flags & CPUIDLE_FLAG_CHECK_BM) ? omap3_enter_idle_bm : omap3_enter_idle; diff --git a/arch/arm/mach-omap2/pm.h b/arch/arm/mach-omap2/pm.h index 797bfd1..32dbc13 100644 --- a/arch/arm/mach-omap2/pm.h +++ b/arch/arm/mach-omap2/pm.h @@ -36,11 +36,16 @@ static inline int omap4_opp_init(void) } #endif +/* + * cpuidle mach specific parameters + * + * The board code can override the default C-states definition using + * omap3_pm_init_cpuidle + */ struct cpuidle_params { - u8 valid; - u32 sleep_latency; - u32 wake_latency; - u32 threshold; + u32 exit_latency; /* exit_latency = sleep + wake-up latencies */ + u32 target_residency; + u8 valid; /* validates the C-state */ }; #if defined(CONFIG_PM) && defined(CONFIG_CPU_IDLE) -- cgit v0.10.2 From badc303a862ba6c5fd3d324f5332db07877f8159 Mon Sep 17 00:00:00 2001 From: Jean Pihet Date: Mon, 9 May 2011 12:02:14 +0200 Subject: OMAP3: cpuidle: re-organize the C-states data The current implementation defines an internal structure and a C-states array. Using those structures is redundant to the structs used by the cpuidle framework. This patch provides a clean-up of the internal struct, removes the internal C-states array, stores the data using the existing cpuidle per C-state struct and registers the mach specific data to cpuidle C-state driver_data (accessed using cpuidle_[gs]et_statedata). Also removes unused macros, fields and code and compacts the repeating code using an inline helper function. The result is more compact and more readable code as well as reduced data RAM usage. Also retain C1 as the only always valid C-state and system safe state. Signed-off-by: Jean Pihet Signed-off-by: Kevin Hilman diff --git a/arch/arm/mach-omap2/cpuidle34xx.c b/arch/arm/mach-omap2/cpuidle34xx.c index d7bc31a..f9c8676 100644 --- a/arch/arm/mach-omap2/cpuidle34xx.c +++ b/arch/arm/mach-omap2/cpuidle34xx.c @@ -36,35 +36,6 @@ #ifdef CONFIG_CPU_IDLE -#define OMAP3_MAX_STATES 7 -#define OMAP3_STATE_C1 0 /* C1 - MPU WFI + Core active */ -#define OMAP3_STATE_C2 1 /* C2 - MPU WFI + Core inactive */ -#define OMAP3_STATE_C3 2 /* C3 - MPU CSWR + Core inactive */ -#define OMAP3_STATE_C4 3 /* C4 - MPU OFF + Core iactive */ -#define OMAP3_STATE_C5 4 /* C5 - MPU RET + Core RET */ -#define OMAP3_STATE_C6 5 /* C6 - MPU OFF + Core RET */ -#define OMAP3_STATE_C7 6 /* C7 - MPU OFF + Core OFF */ - -#define OMAP3_STATE_MAX OMAP3_STATE_C7 - -#define CPUIDLE_FLAG_CHECK_BM 0x10000 /* use omap3_enter_idle_bm() */ - -struct omap3_processor_cx { - u8 valid; - u8 type; - u32 exit_latency; - u32 mpu_state; - u32 core_state; - u32 target_residency; - u32 flags; - const char *desc; -}; - -struct omap3_processor_cx omap3_power_states[OMAP3_MAX_STATES]; -struct omap3_processor_cx current_cx_state; -struct powerdomain *mpu_pd, *core_pd, *per_pd; -struct powerdomain *cam_pd; - /* * The latencies/thresholds for various C states have * to be configured from the respective board files. @@ -88,6 +59,17 @@ static struct cpuidle_params cpuidle_params_table[] = { /* C7 */ {10000 + 30000, 300000, 1}, }; +#define OMAP3_NUM_STATES ARRAY_SIZE(cpuidle_params_table) + +/* Mach specific information to be recorded in the C-state driver_data */ +struct omap3_idle_statedata { + u32 mpu_state; + u32 core_state; + u8 valid; +}; +struct omap3_idle_statedata omap3_idle_data[OMAP3_NUM_STATES]; + +struct powerdomain *mpu_pd, *core_pd, *per_pd, *cam_pd; static int omap3_idle_bm_check(void) { @@ -121,12 +103,10 @@ static int _cpuidle_deny_idle(struct powerdomain *pwrdm, static int omap3_enter_idle(struct cpuidle_device *dev, struct cpuidle_state *state) { - struct omap3_processor_cx *cx = cpuidle_get_statedata(state); + struct omap3_idle_statedata *cx = cpuidle_get_statedata(state); struct timespec ts_preidle, ts_postidle, ts_idle; u32 mpu_state = cx->mpu_state, core_state = cx->core_state; - current_cx_state = *cx; - /* Used to keep track of the total time in idle */ getnstimeofday(&ts_preidle); @@ -139,7 +119,8 @@ static int omap3_enter_idle(struct cpuidle_device *dev, if (omap_irq_pending() || need_resched()) goto return_sleep_time; - if (cx->type == OMAP3_STATE_C1) { + /* Deny idle for C1 */ + if (state == &dev->states[0]) { pwrdm_for_each_clkdm(mpu_pd, _cpuidle_deny_idle); pwrdm_for_each_clkdm(core_pd, _cpuidle_deny_idle); } @@ -147,7 +128,8 @@ static int omap3_enter_idle(struct cpuidle_device *dev, /* Execute ARM wfi */ omap_sram_idle(); - if (cx->type == OMAP3_STATE_C1) { + /* Re-allow idle for C1 */ + if (state == &dev->states[0]) { pwrdm_for_each_clkdm(mpu_pd, _cpuidle_allow_idle); pwrdm_for_each_clkdm(core_pd, _cpuidle_allow_idle); } @@ -169,26 +151,26 @@ return_sleep_time: * * If the current state is valid, it is returned back to the caller. * Else, this function searches for a lower c-state which is still - * valid (as defined in omap3_power_states[]). + * valid. */ static struct cpuidle_state *next_valid_state(struct cpuidle_device *dev, - struct cpuidle_state *curr) + struct cpuidle_state *curr) { struct cpuidle_state *next = NULL; - struct omap3_processor_cx *cx; + struct omap3_idle_statedata *cx; - cx = (struct omap3_processor_cx *)cpuidle_get_statedata(curr); + cx = cpuidle_get_statedata(curr); /* Check if current state is valid */ if (cx->valid) { return curr; } else { - u8 idx = OMAP3_STATE_MAX; + int idx = OMAP3_NUM_STATES - 1; /* * Reach the current state starting at highest C-state */ - for (; idx >= OMAP3_STATE_C1; idx--) { + for (; idx >= 0; idx--) { if (&dev->states[idx] == curr) { next = &dev->states[idx]; break; @@ -205,9 +187,7 @@ static struct cpuidle_state *next_valid_state(struct cpuidle_device *dev, * Start search from the next (lower) state. */ idx--; - for (; idx >= OMAP3_STATE_C1; idx--) { - struct omap3_processor_cx *cx; - + for (; idx >= 0; idx--) { cx = cpuidle_get_statedata(&dev->states[idx]); if (cx->valid) { next = &dev->states[idx]; @@ -215,7 +195,7 @@ static struct cpuidle_state *next_valid_state(struct cpuidle_device *dev, } } /* - * C1 and C2 are always valid. + * C1 is always valid. * So, no need to check for 'next==NULL' outside this loop. */ } @@ -228,9 +208,8 @@ static struct cpuidle_state *next_valid_state(struct cpuidle_device *dev, * @dev: cpuidle device * @state: The target state to be programmed * - * Used for C states with CPUIDLE_FLAG_CHECK_BM flag set. This - * function checks for any pending activity and then programs the - * device to the specified or a safer state. + * This function checks for any pending activity and then programs + * the device to the specified or a safer state. */ static int omap3_enter_idle_bm(struct cpuidle_device *dev, struct cpuidle_state *state) @@ -238,10 +217,10 @@ static int omap3_enter_idle_bm(struct cpuidle_device *dev, struct cpuidle_state *new_state = next_valid_state(dev, state); u32 core_next_state, per_next_state = 0, per_saved_state = 0; u32 cam_state; - struct omap3_processor_cx *cx; + struct omap3_idle_statedata *cx; int ret; - if ((state->flags & CPUIDLE_FLAG_CHECK_BM) && omap3_idle_bm_check()) { + if (omap3_idle_bm_check()) { BUG_ON(!dev->safe_state); new_state = dev->safe_state; goto select_state; @@ -307,8 +286,8 @@ void omap3_cpuidle_update_states(u32 mpu_deepest_state, u32 core_deepest_state) { int i; - for (i = OMAP3_STATE_C1; i < OMAP3_MAX_STATES; i++) { - struct omap3_processor_cx *cx = &omap3_power_states[i]; + for (i = 0; i < OMAP3_NUM_STATES; i++) { + struct omap3_idle_statedata *cx = &omap3_idle_data[i]; if ((cx->mpu_state >= mpu_deepest_state) && (cx->core_state >= core_deepest_state)) { @@ -326,9 +305,8 @@ void omap3_pm_init_cpuidle(struct cpuidle_params *cpuidle_board_params) if (!cpuidle_board_params) return; - for (i = OMAP3_STATE_C1; i < OMAP3_MAX_STATES; i++) { - cpuidle_params_table[i].valid = - cpuidle_board_params[i].valid; + for (i = 0; i < OMAP3_NUM_STATES; i++) { + cpuidle_params_table[i].valid = cpuidle_board_params[i].valid; cpuidle_params_table[i].exit_latency = cpuidle_board_params[i].exit_latency; cpuidle_params_table[i].target_residency = @@ -337,185 +315,104 @@ void omap3_pm_init_cpuidle(struct cpuidle_params *cpuidle_board_params) return; } -/* omap3_init_power_states - Initialises the OMAP3 specific C states. - * - * Below is the desciption of each C state. - * C1 . MPU WFI + Core active - * C2 . MPU WFI + Core inactive - * C3 . MPU CSWR + Core inactive - * C4 . MPU OFF + Core inactive - * C5 . MPU CSWR + Core CSWR - * C6 . MPU OFF + Core CSWR - * C7 . MPU OFF + Core OFF - */ -void omap_init_power_states(void) -{ - /* C1 . MPU WFI + Core active */ - omap3_power_states[OMAP3_STATE_C1].valid = - cpuidle_params_table[OMAP3_STATE_C1].valid; - omap3_power_states[OMAP3_STATE_C1].type = OMAP3_STATE_C1; - omap3_power_states[OMAP3_STATE_C1].exit_latency = - cpuidle_params_table[OMAP3_STATE_C1].exit_latency; - omap3_power_states[OMAP3_STATE_C1].target_residency = - cpuidle_params_table[OMAP3_STATE_C1].target_residency; - omap3_power_states[OMAP3_STATE_C1].mpu_state = PWRDM_POWER_ON; - omap3_power_states[OMAP3_STATE_C1].core_state = PWRDM_POWER_ON; - omap3_power_states[OMAP3_STATE_C1].flags = CPUIDLE_FLAG_TIME_VALID; - omap3_power_states[OMAP3_STATE_C1].desc = "MPU ON + CORE ON"; - - /* C2 . MPU WFI + Core inactive */ - omap3_power_states[OMAP3_STATE_C2].valid = - cpuidle_params_table[OMAP3_STATE_C2].valid; - omap3_power_states[OMAP3_STATE_C2].type = OMAP3_STATE_C2; - omap3_power_states[OMAP3_STATE_C2].exit_latency = - cpuidle_params_table[OMAP3_STATE_C2].exit_latency; - omap3_power_states[OMAP3_STATE_C2].target_residency = - cpuidle_params_table[OMAP3_STATE_C2].target_residency; - omap3_power_states[OMAP3_STATE_C2].mpu_state = PWRDM_POWER_ON; - omap3_power_states[OMAP3_STATE_C2].core_state = PWRDM_POWER_ON; - omap3_power_states[OMAP3_STATE_C2].flags = CPUIDLE_FLAG_TIME_VALID | - CPUIDLE_FLAG_CHECK_BM; - omap3_power_states[OMAP3_STATE_C2].desc = "MPU ON + CORE ON"; - - /* C3 . MPU CSWR + Core inactive */ - omap3_power_states[OMAP3_STATE_C3].valid = - cpuidle_params_table[OMAP3_STATE_C3].valid; - omap3_power_states[OMAP3_STATE_C3].type = OMAP3_STATE_C3; - omap3_power_states[OMAP3_STATE_C3].exit_latency = - cpuidle_params_table[OMAP3_STATE_C3].exit_latency; - omap3_power_states[OMAP3_STATE_C3].target_residency = - cpuidle_params_table[OMAP3_STATE_C3].target_residency; - omap3_power_states[OMAP3_STATE_C3].mpu_state = PWRDM_POWER_RET; - omap3_power_states[OMAP3_STATE_C3].core_state = PWRDM_POWER_ON; - omap3_power_states[OMAP3_STATE_C3].flags = CPUIDLE_FLAG_TIME_VALID | - CPUIDLE_FLAG_CHECK_BM; - omap3_power_states[OMAP3_STATE_C3].desc = "MPU RET + CORE ON"; - - /* C4 . MPU OFF + Core inactive */ - omap3_power_states[OMAP3_STATE_C4].valid = - cpuidle_params_table[OMAP3_STATE_C4].valid; - omap3_power_states[OMAP3_STATE_C4].type = OMAP3_STATE_C4; - omap3_power_states[OMAP3_STATE_C4].exit_latency = - cpuidle_params_table[OMAP3_STATE_C4].exit_latency; - omap3_power_states[OMAP3_STATE_C4].target_residency = - cpuidle_params_table[OMAP3_STATE_C4].target_residency; - omap3_power_states[OMAP3_STATE_C4].mpu_state = PWRDM_POWER_OFF; - omap3_power_states[OMAP3_STATE_C4].core_state = PWRDM_POWER_ON; - omap3_power_states[OMAP3_STATE_C4].flags = CPUIDLE_FLAG_TIME_VALID | - CPUIDLE_FLAG_CHECK_BM; - omap3_power_states[OMAP3_STATE_C4].desc = "MPU OFF + CORE ON"; - - /* C5 . MPU CSWR + Core CSWR*/ - omap3_power_states[OMAP3_STATE_C5].valid = - cpuidle_params_table[OMAP3_STATE_C5].valid; - omap3_power_states[OMAP3_STATE_C5].type = OMAP3_STATE_C5; - omap3_power_states[OMAP3_STATE_C5].exit_latency = - cpuidle_params_table[OMAP3_STATE_C5].exit_latency; - omap3_power_states[OMAP3_STATE_C5].target_residency = - cpuidle_params_table[OMAP3_STATE_C5].target_residency; - omap3_power_states[OMAP3_STATE_C5].mpu_state = PWRDM_POWER_RET; - omap3_power_states[OMAP3_STATE_C5].core_state = PWRDM_POWER_RET; - omap3_power_states[OMAP3_STATE_C5].flags = CPUIDLE_FLAG_TIME_VALID | - CPUIDLE_FLAG_CHECK_BM; - omap3_power_states[OMAP3_STATE_C5].desc = "MPU RET + CORE RET"; - - /* C6 . MPU OFF + Core CSWR */ - omap3_power_states[OMAP3_STATE_C6].valid = - cpuidle_params_table[OMAP3_STATE_C6].valid; - omap3_power_states[OMAP3_STATE_C6].type = OMAP3_STATE_C6; - omap3_power_states[OMAP3_STATE_C6].exit_latency = - cpuidle_params_table[OMAP3_STATE_C6].exit_latency; - omap3_power_states[OMAP3_STATE_C6].target_residency = - cpuidle_params_table[OMAP3_STATE_C6].target_residency; - omap3_power_states[OMAP3_STATE_C6].mpu_state = PWRDM_POWER_OFF; - omap3_power_states[OMAP3_STATE_C6].core_state = PWRDM_POWER_RET; - omap3_power_states[OMAP3_STATE_C6].flags = CPUIDLE_FLAG_TIME_VALID | - CPUIDLE_FLAG_CHECK_BM; - omap3_power_states[OMAP3_STATE_C6].desc = "MPU OFF + CORE RET"; - - /* C7 . MPU OFF + Core OFF */ - omap3_power_states[OMAP3_STATE_C7].valid = - cpuidle_params_table[OMAP3_STATE_C7].valid; - omap3_power_states[OMAP3_STATE_C7].type = OMAP3_STATE_C7; - omap3_power_states[OMAP3_STATE_C7].exit_latency = - cpuidle_params_table[OMAP3_STATE_C7].exit_latency; - omap3_power_states[OMAP3_STATE_C7].target_residency = - cpuidle_params_table[OMAP3_STATE_C7].target_residency; - omap3_power_states[OMAP3_STATE_C7].mpu_state = PWRDM_POWER_OFF; - omap3_power_states[OMAP3_STATE_C7].core_state = PWRDM_POWER_OFF; - omap3_power_states[OMAP3_STATE_C7].flags = CPUIDLE_FLAG_TIME_VALID | - CPUIDLE_FLAG_CHECK_BM; - omap3_power_states[OMAP3_STATE_C7].desc = "MPU OFF + CORE OFF"; - - /* - * Erratum i583: implementation for ES rev < Es1.2 on 3630. We cannot - * enable OFF mode in a stable form for previous revisions. - * we disable C7 state as a result. - */ - if (IS_PM34XX_ERRATUM(PM_SDRC_WAKEUP_ERRATUM_i583)) { - omap3_power_states[OMAP3_STATE_C7].valid = 0; - cpuidle_params_table[OMAP3_STATE_C7].valid = 0; - pr_warn("%s: core off state C7 disabled due to i583\n", - __func__); - } -} - struct cpuidle_driver omap3_idle_driver = { .name = "omap3_idle", .owner = THIS_MODULE, }; +/* Fill in the state data from the mach tables and register the driver_data */ +static inline struct omap3_idle_statedata *_fill_cstate( + struct cpuidle_device *dev, + int idx, const char *descr) +{ + struct omap3_idle_statedata *cx = &omap3_idle_data[idx]; + struct cpuidle_state *state = &dev->states[idx]; + + state->exit_latency = cpuidle_params_table[idx].exit_latency; + state->target_residency = cpuidle_params_table[idx].target_residency; + state->flags = CPUIDLE_FLAG_TIME_VALID; + state->enter = omap3_enter_idle_bm; + cx->valid = cpuidle_params_table[idx].valid; + sprintf(state->name, "C%d", idx + 1); + strncpy(state->desc, descr, CPUIDLE_DESC_LEN); + cpuidle_set_statedata(state, cx); + + return cx; +} + /** * omap3_idle_init - Init routine for OMAP3 idle * - * Registers the OMAP3 specific cpuidle driver with the cpuidle + * Registers the OMAP3 specific cpuidle driver to the cpuidle * framework with the valid set of states. */ int __init omap3_idle_init(void) { - int i, count = 0; - struct omap3_processor_cx *cx; - struct cpuidle_state *state; struct cpuidle_device *dev; + struct omap3_idle_statedata *cx; mpu_pd = pwrdm_lookup("mpu_pwrdm"); core_pd = pwrdm_lookup("core_pwrdm"); per_pd = pwrdm_lookup("per_pwrdm"); cam_pd = pwrdm_lookup("cam_pwrdm"); - omap_init_power_states(); cpuidle_register_driver(&omap3_idle_driver); - dev = &per_cpu(omap3_idle_dev, smp_processor_id()); - for (i = OMAP3_STATE_C1; i < OMAP3_MAX_STATES; i++) { - cx = &omap3_power_states[i]; - state = &dev->states[count]; - - if (!cx->valid) - continue; - cpuidle_set_statedata(state, cx); - state->exit_latency = cx->exit_latency; - state->target_residency = cx->target_residency; - state->flags = cx->flags; - state->enter = (state->flags & CPUIDLE_FLAG_CHECK_BM) ? - omap3_enter_idle_bm : omap3_enter_idle; - if (cx->type == OMAP3_STATE_C1) - dev->safe_state = state; - sprintf(state->name, "C%d", count+1); - strncpy(state->desc, cx->desc, CPUIDLE_DESC_LEN); - count++; - } + /* C1 . MPU WFI + Core active */ + cx = _fill_cstate(dev, 0, "MPU ON + CORE ON"); + (&dev->states[0])->enter = omap3_enter_idle; + dev->safe_state = &dev->states[0]; + cx->valid = 1; /* C1 is always valid */ + cx->mpu_state = PWRDM_POWER_ON; + cx->core_state = PWRDM_POWER_ON; + + /* C2 . MPU WFI + Core inactive */ + cx = _fill_cstate(dev, 1, "MPU ON + CORE ON"); + cx->mpu_state = PWRDM_POWER_ON; + cx->core_state = PWRDM_POWER_ON; + + /* C3 . MPU CSWR + Core inactive */ + cx = _fill_cstate(dev, 2, "MPU RET + CORE ON"); + cx->mpu_state = PWRDM_POWER_RET; + cx->core_state = PWRDM_POWER_ON; + + /* C4 . MPU OFF + Core inactive */ + cx = _fill_cstate(dev, 3, "MPU OFF + CORE ON"); + cx->mpu_state = PWRDM_POWER_OFF; + cx->core_state = PWRDM_POWER_ON; + + /* C5 . MPU RET + Core RET */ + cx = _fill_cstate(dev, 4, "MPU RET + CORE RET"); + cx->mpu_state = PWRDM_POWER_RET; + cx->core_state = PWRDM_POWER_RET; - if (!count) - return -EINVAL; - dev->state_count = count; + /* C6 . MPU OFF + Core RET */ + cx = _fill_cstate(dev, 5, "MPU OFF + CORE RET"); + cx->mpu_state = PWRDM_POWER_OFF; + cx->core_state = PWRDM_POWER_RET; + + /* C7 . MPU OFF + Core OFF */ + cx = _fill_cstate(dev, 6, "MPU OFF + CORE OFF"); + /* + * Erratum i583: implementation for ES rev < Es1.2 on 3630. We cannot + * enable OFF mode in a stable form for previous revisions. + * We disable C7 state as a result. + */ + if (IS_PM34XX_ERRATUM(PM_SDRC_WAKEUP_ERRATUM_i583)) { + cx->valid = 0; + pr_warn("%s: core off state C7 disabled due to i583\n", + __func__); + } + cx->mpu_state = PWRDM_POWER_OFF; + cx->core_state = PWRDM_POWER_OFF; if (enable_off_mode) omap3_cpuidle_update_states(PWRDM_POWER_OFF, PWRDM_POWER_OFF); else omap3_cpuidle_update_states(PWRDM_POWER_RET, PWRDM_POWER_RET); + dev->state_count = OMAP3_NUM_STATES; if (cpuidle_register_device(dev)) { printk(KERN_ERR "%s: CPUidle register device failed\n", __func__); -- cgit v0.10.2 From c6cd91de1cb4694f2dfcc7df831e276fffdffffc Mon Sep 17 00:00:00 2001 From: Jean Pihet Date: Mon, 9 May 2011 12:02:15 +0200 Subject: OMAP3: cpuidle: code rework for improved readability - fix single and multi-lines comments format - removed the omap3_idle_bm_check function and replaced the test in omap3_enter_idle_bm by the equivalent code - re-organize omap3_enter_idle_bm code path, assign local variables only when needed - reword some comments Signed-off-by: Jean Pihet Signed-off-by: Kevin Hilman diff --git a/arch/arm/mach-omap2/cpuidle34xx.c b/arch/arm/mach-omap2/cpuidle34xx.c index f9c8676..dd31e53 100644 --- a/arch/arm/mach-omap2/cpuidle34xx.c +++ b/arch/arm/mach-omap2/cpuidle34xx.c @@ -71,13 +71,6 @@ struct omap3_idle_statedata omap3_idle_data[OMAP3_NUM_STATES]; struct powerdomain *mpu_pd, *core_pd, *per_pd, *cam_pd; -static int omap3_idle_bm_check(void) -{ - if (!omap3_can_sleep()) - return 1; - return 0; -} - static int _cpuidle_allow_idle(struct powerdomain *pwrdm, struct clockdomain *clkdm) { @@ -157,9 +150,7 @@ static struct cpuidle_state *next_valid_state(struct cpuidle_device *dev, struct cpuidle_state *curr) { struct cpuidle_state *next = NULL; - struct omap3_idle_statedata *cx; - - cx = cpuidle_get_statedata(curr); + struct omap3_idle_statedata *cx = cpuidle_get_statedata(curr); /* Check if current state is valid */ if (cx->valid) { @@ -167,9 +158,7 @@ static struct cpuidle_state *next_valid_state(struct cpuidle_device *dev, } else { int idx = OMAP3_NUM_STATES - 1; - /* - * Reach the current state starting at highest C-state - */ + /* Reach the current state starting at highest C-state */ for (; idx >= 0; idx--) { if (&dev->states[idx] == curr) { next = &dev->states[idx]; @@ -177,9 +166,7 @@ static struct cpuidle_state *next_valid_state(struct cpuidle_device *dev, } } - /* - * Should never hit this condition. - */ + /* Should never hit this condition */ WARN_ON(next == NULL); /* @@ -214,29 +201,16 @@ static struct cpuidle_state *next_valid_state(struct cpuidle_device *dev, static int omap3_enter_idle_bm(struct cpuidle_device *dev, struct cpuidle_state *state) { - struct cpuidle_state *new_state = next_valid_state(dev, state); - u32 core_next_state, per_next_state = 0, per_saved_state = 0; - u32 cam_state; + struct cpuidle_state *new_state; + u32 core_next_state, per_next_state = 0, per_saved_state = 0, cam_state; struct omap3_idle_statedata *cx; int ret; - if (omap3_idle_bm_check()) { - BUG_ON(!dev->safe_state); + if (!omap3_can_sleep()) { new_state = dev->safe_state; goto select_state; } - cx = cpuidle_get_statedata(state); - core_next_state = cx->core_state; - - /* - * FIXME: we currently manage device-specific idle states - * for PER and CORE in combination with CPU-specific - * idle states. This is wrong, and device-specific - * idle management needs to be separated out into - * its own code. - */ - /* * Prevent idle completely if CAM is active. * CAM does not have wakeup capability in OMAP3. @@ -248,9 +222,19 @@ static int omap3_enter_idle_bm(struct cpuidle_device *dev, } /* + * FIXME: we currently manage device-specific idle states + * for PER and CORE in combination with CPU-specific + * idle states. This is wrong, and device-specific + * idle management needs to be separated out into + * its own code. + */ + + /* * Prevent PER off if CORE is not in retention or off as this * would disable PER wakeups completely. */ + cx = cpuidle_get_statedata(state); + core_next_state = cx->core_state; per_next_state = per_saved_state = pwrdm_read_next_pwrst(per_pd); if ((per_next_state == PWRDM_POWER_OFF) && (core_next_state > PWRDM_POWER_RET)) @@ -260,6 +244,8 @@ static int omap3_enter_idle_bm(struct cpuidle_device *dev, if (per_next_state != per_saved_state) pwrdm_set_next_pwrst(per_pd, per_next_state); + new_state = next_valid_state(dev, state); + select_state: dev->last_state = new_state; ret = omap3_enter_idle(dev, new_state); @@ -320,7 +306,7 @@ struct cpuidle_driver omap3_idle_driver = { .owner = THIS_MODULE, }; -/* Fill in the state data from the mach tables and register the driver_data */ +/* Helper to fill the C-state common data and register the driver_data */ static inline struct omap3_idle_statedata *_fill_cstate( struct cpuidle_device *dev, int idx, const char *descr) -- cgit v0.10.2 From 04908918191f7926ec7af99890fb4ddb3b769c13 Mon Sep 17 00:00:00 2001 From: Jean Pihet Date: Mon, 9 May 2011 12:02:16 +0200 Subject: OMAP3: cpuidle: change the power domains modes determination logic The achievable power modes of the power domains in cpuidle depends on the system wide 'enable_off_mode' knob in debugfs. Upon changing enable_off_mode, do not change the C-states 'valid' field but instead dynamically restrict the power modes when entering idle. The C-states 'valid' field is just used to enable/disable some C-states at init and shall not be changed later on. Signed-off-by: Jean Pihet Signed-off-by: Kevin Hilman diff --git a/arch/arm/mach-omap2/cpuidle34xx.c b/arch/arm/mach-omap2/cpuidle34xx.c index dd31e53..4bf6e6e 100644 --- a/arch/arm/mach-omap2/cpuidle34xx.c +++ b/arch/arm/mach-omap2/cpuidle34xx.c @@ -138,22 +138,40 @@ return_sleep_time: } /** - * next_valid_state - Find next valid c-state + * next_valid_state - Find next valid C-state * @dev: cpuidle device - * @state: Currently selected c-state + * @state: Currently selected C-state * * If the current state is valid, it is returned back to the caller. * Else, this function searches for a lower c-state which is still * valid. + * + * A state is valid if the 'valid' field is enabled and + * if it satisfies the enable_off_mode condition. */ static struct cpuidle_state *next_valid_state(struct cpuidle_device *dev, struct cpuidle_state *curr) { struct cpuidle_state *next = NULL; struct omap3_idle_statedata *cx = cpuidle_get_statedata(curr); + u32 mpu_deepest_state = PWRDM_POWER_RET; + u32 core_deepest_state = PWRDM_POWER_RET; + + if (enable_off_mode) { + mpu_deepest_state = PWRDM_POWER_OFF; + /* + * Erratum i583: valable for ES rev < Es1.2 on 3630. + * CORE OFF mode is not supported in a stable form, restrict + * instead the CORE state to RET. + */ + if (!IS_PM34XX_ERRATUM(PM_SDRC_WAKEUP_ERRATUM_i583)) + core_deepest_state = PWRDM_POWER_OFF; + } /* Check if current state is valid */ - if (cx->valid) { + if ((cx->valid) && + (cx->mpu_state >= mpu_deepest_state) && + (cx->core_state >= core_deepest_state)) { return curr; } else { int idx = OMAP3_NUM_STATES - 1; @@ -176,7 +194,9 @@ static struct cpuidle_state *next_valid_state(struct cpuidle_device *dev, idx--; for (; idx >= 0; idx--) { cx = cpuidle_get_statedata(&dev->states[idx]); - if (cx->valid) { + if ((cx->valid) && + (cx->mpu_state >= mpu_deepest_state) && + (cx->core_state >= core_deepest_state)) { next = &dev->states[idx]; break; } @@ -259,31 +279,6 @@ select_state: DEFINE_PER_CPU(struct cpuidle_device, omap3_idle_dev); -/** - * omap3_cpuidle_update_states() - Update the cpuidle states - * @mpu_deepest_state: Enable states up to and including this for mpu domain - * @core_deepest_state: Enable states up to and including this for core domain - * - * This goes through the list of states available and enables and disables the - * validity of C states based on deepest state that can be achieved for the - * variable domain - */ -void omap3_cpuidle_update_states(u32 mpu_deepest_state, u32 core_deepest_state) -{ - int i; - - for (i = 0; i < OMAP3_NUM_STATES; i++) { - struct omap3_idle_statedata *cx = &omap3_idle_data[i]; - - if ((cx->mpu_state >= mpu_deepest_state) && - (cx->core_state >= core_deepest_state)) { - cx->valid = 1; - } else { - cx->valid = 0; - } - } -} - void omap3_pm_init_cpuidle(struct cpuidle_params *cpuidle_board_params) { int i; @@ -393,11 +388,6 @@ int __init omap3_idle_init(void) cx->mpu_state = PWRDM_POWER_OFF; cx->core_state = PWRDM_POWER_OFF; - if (enable_off_mode) - omap3_cpuidle_update_states(PWRDM_POWER_OFF, PWRDM_POWER_OFF); - else - omap3_cpuidle_update_states(PWRDM_POWER_RET, PWRDM_POWER_RET); - dev->state_count = OMAP3_NUM_STATES; if (cpuidle_register_device(dev)) { printk(KERN_ERR "%s: CPUidle register device failed\n", diff --git a/arch/arm/mach-omap2/pm.h b/arch/arm/mach-omap2/pm.h index 32dbc13..45bcfce 100644 --- a/arch/arm/mach-omap2/pm.h +++ b/arch/arm/mach-omap2/pm.h @@ -78,10 +78,6 @@ extern u32 sleep_while_idle; #define sleep_while_idle 0 #endif -#if defined(CONFIG_CPU_IDLE) -extern void omap3_cpuidle_update_states(u32, u32); -#endif - #if defined(CONFIG_PM_DEBUG) && defined(CONFIG_DEBUG_FS) extern void pm_dbg_update_time(struct powerdomain *pwrdm, int prev); extern int pm_dbg_regset_save(int reg_set); diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c index 0c5e3a4..caf9f6c 100644 --- a/arch/arm/mach-omap2/pm34xx.c +++ b/arch/arm/mach-omap2/pm34xx.c @@ -779,18 +779,6 @@ void omap3_pm_off_mode_enable(int enable) else state = PWRDM_POWER_RET; -#ifdef CONFIG_CPU_IDLE - /* - * Erratum i583: implementation for ES rev < Es1.2 on 3630. We cannot - * enable OFF mode in a stable form for previous revisions, restrict - * instead to RET - */ - if (IS_PM34XX_ERRATUM(PM_SDRC_WAKEUP_ERRATUM_i583)) - omap3_cpuidle_update_states(state, PWRDM_POWER_RET); - else - omap3_cpuidle_update_states(state, state); -#endif - list_for_each_entry(pwrst, &pwrst_list, node) { if (IS_PM34XX_ERRATUM(PM_SDRC_WAKEUP_ERRATUM_i583) && pwrst->pwrdm == core_pwrdm && -- cgit v0.10.2 From 99aa18278e867574d72201b806f82ace07d4804b Mon Sep 17 00:00:00 2001 From: Sanjeev Premi Date: Wed, 18 May 2011 14:44:40 +0530 Subject: OMAP3: PM: Boot message is not an error, and not helpful, remove it It shows up on the console despite using "silent" in the bootargs, and it's really just noise in the boot log since PM init is always called. Signed-off-by: Sanjeev Premi Cc: jhnikula@gmail.com [khilman@ti.com: minor changelog edits] Signed-off-by: Kevin Hilman diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c index caf9f6c..c155c9d 100644 --- a/arch/arm/mach-omap2/pm34xx.c +++ b/arch/arm/mach-omap2/pm34xx.c @@ -883,8 +883,6 @@ static int __init omap3_pm_init(void) pm_errata_configure(); - printk(KERN_ERR "Power Management for TI OMAP3.\n"); - /* XXX prcm_setup_regs needs to be before enabling hw * supervised mode for powerdomains */ prcm_setup_regs(); -- cgit v0.10.2