From b50863d6e36ec3764882f57417b5c5cfe35a9b4b Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Mon, 28 Jul 2008 12:58:53 -0300 Subject: V4L/DVB (8553): media/video/Kconfig: get rid of a select Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig index 3e9e0dc..3f945b0 100644 --- a/drivers/media/video/Kconfig +++ b/drivers/media/video/Kconfig @@ -822,8 +822,7 @@ config VIDEO_OVCAMCHIP config USB_W9968CF tristate "USB W996[87]CF JPEG Dual Mode Camera support" - depends on VIDEO_V4L1 && I2C - select VIDEO_OVCAMCHIP + depends on VIDEO_V4L1 && I2C && VIDEO_OVCAMCHIP ---help--- Say Y here if you want support for cameras based on OV681 or Winbond W9967CF/W9968CF JPEG USB Dual Mode Camera Chips. -- cgit v0.10.2 From 96f1e40431d4b0afc75474d7961f8dd98ef21112 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Mon, 28 Jul 2008 13:07:42 -0300 Subject: V4L/DVB (8554): media/video/Kconfig: cosmetic changes and convert select into depends on It seems cosmetically better to let USB drivers be the last one. Also, two SOC drivers were using select, instead of depends on SOC_CAMERA. Since select has some drawbacks when checking for dependencies, convert those two into depends on. Cc: Guennadi Liakhovetski Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig index 3f945b0..1f6c9ee 100644 --- a/drivers/media/video/Kconfig +++ b/drivers/media/video/Kconfig @@ -784,6 +784,64 @@ config VIDEO_CAFE_CCIC CMOS camera controller. This is the controller found on first- generation OLPC systems. +config SOC_CAMERA + tristate "SoC camera support" + depends on VIDEO_V4L2 && HAS_DMA + select VIDEOBUF_GEN + help + SoC Camera is a common API to several cameras, not connecting + over a bus like PCI or USB. For example some i2c camera connected + directly to the data bus of an SoC. + +config SOC_CAMERA_MT9M001 + tristate "mt9m001 support" + depends on SOC_CAMERA && I2C + select GPIO_PCA953X if MT9M001_PCA9536_SWITCH + help + This driver supports MT9M001 cameras from Micron, monochrome + and colour models. + +config MT9M001_PCA9536_SWITCH + bool "pca9536 datawidth switch for mt9m001" + depends on SOC_CAMERA_MT9M001 && GENERIC_GPIO + help + Select this if your MT9M001 camera uses a PCA9536 I2C GPIO + extender to switch between 8 and 10 bit datawidth modes + +config SOC_CAMERA_MT9V022 + tristate "mt9v022 support" + depends on SOC_CAMERA && I2C + select GPIO_PCA953X if MT9V022_PCA9536_SWITCH + help + This driver supports MT9V022 cameras from Micron + +config MT9V022_PCA9536_SWITCH + bool "pca9536 datawidth switch for mt9v022" + depends on SOC_CAMERA_MT9V022 && GENERIC_GPIO + help + Select this if your MT9V022 camera uses a PCA9536 I2C GPIO + extender to switch between 8 and 10 bit datawidth modes + +config SOC_CAMERA_PLATFORM + tristate "platform camera support" + depends on SOC_CAMERA + help + This is a generic SoC camera platform driver, useful for testing + +config VIDEO_PXA27x + tristate "PXA27x Quick Capture Interface driver" + depends on VIDEO_DEV && PXA27x && SOC_CAMERA + select VIDEOBUF_DMA_SG + ---help--- + This is a v4l2 driver for the PXA27x Quick Capture Interface + +config VIDEO_SH_MOBILE_CEU + tristate "SuperH Mobile CEU Interface driver" + depends on VIDEO_DEV && SOC_CAMERA && HAS_DMA + select VIDEOBUF_DMA_CONTIG + ---help--- + This is a v4l2 driver for the SuperH Mobile CEU Interface + # # USB Multimedia device configuration # @@ -913,64 +971,4 @@ config USB_S2255 endif # V4L_USB_DRIVERS -config SOC_CAMERA - tristate "SoC camera support" - depends on VIDEO_V4L2 && HAS_DMA - select VIDEOBUF_GEN - help - SoC Camera is a common API to several cameras, not connecting - over a bus like PCI or USB. For example some i2c camera connected - directly to the data bus of an SoC. - -config SOC_CAMERA_MT9M001 - tristate "mt9m001 support" - depends on SOC_CAMERA && I2C - select GPIO_PCA953X if MT9M001_PCA9536_SWITCH - help - This driver supports MT9M001 cameras from Micron, monochrome - and colour models. - -config MT9M001_PCA9536_SWITCH - bool "pca9536 datawidth switch for mt9m001" - depends on SOC_CAMERA_MT9M001 && GENERIC_GPIO - help - Select this if your MT9M001 camera uses a PCA9536 I2C GPIO - extender to switch between 8 and 10 bit datawidth modes - -config SOC_CAMERA_MT9V022 - tristate "mt9v022 support" - depends on SOC_CAMERA && I2C - select GPIO_PCA953X if MT9V022_PCA9536_SWITCH - help - This driver supports MT9V022 cameras from Micron - -config MT9V022_PCA9536_SWITCH - bool "pca9536 datawidth switch for mt9v022" - depends on SOC_CAMERA_MT9V022 && GENERIC_GPIO - help - Select this if your MT9V022 camera uses a PCA9536 I2C GPIO - extender to switch between 8 and 10 bit datawidth modes - -config SOC_CAMERA_PLATFORM - tristate "platform camera support" - depends on SOC_CAMERA - help - This is a generic SoC camera platform driver, useful for testing - -config VIDEO_PXA27x - tristate "PXA27x Quick Capture Interface driver" - depends on VIDEO_DEV && PXA27x - select SOC_CAMERA - select VIDEOBUF_DMA_SG - ---help--- - This is a v4l2 driver for the PXA27x Quick Capture Interface - -config VIDEO_SH_MOBILE_CEU - tristate "SuperH Mobile CEU Interface driver" - depends on VIDEO_DEV && HAS_DMA - select SOC_CAMERA - select VIDEOBUF_DMA_CONTIG - ---help--- - This is a v4l2 driver for the SuperH Mobile CEU Interface - endif # VIDEO_CAPTURE_DRIVERS -- cgit v0.10.2 From 29e66a6ce84abe04bc809ddb35634752881dec79 Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Thu, 4 Sep 2008 17:24:51 -0300 Subject: V4L/DVB: follow lspci device/vendor style Use "[%04x:%04x]" for PCI vendor/device IDs to follow the format used by lspci(8). Signed-off-by: Bjorn Helgaas Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/dvb/bt8xx/dvb-bt8xx.c b/drivers/media/dvb/bt8xx/dvb-bt8xx.c index 6afbfbb..48762a2 100644 --- a/drivers/media/dvb/bt8xx/dvb-bt8xx.c +++ b/drivers/media/dvb/bt8xx/dvb-bt8xx.c @@ -702,7 +702,7 @@ static void frontend_init(struct dvb_bt8xx_card *card, u32 type) } if (card->fe == NULL) - printk("dvb-bt8xx: A frontend driver was not found for device %04x/%04x subsystem %04x/%04x\n", + printk("dvb-bt8xx: A frontend driver was not found for device [%04x:%04x] subsystem [%04x:%04x]\n", card->bt->dev->vendor, card->bt->dev->device, card->bt->dev->subsystem_vendor, diff --git a/drivers/media/dvb/ttpci/av7110.c b/drivers/media/dvb/ttpci/av7110.c index 0777e8f..3b64180 100644 --- a/drivers/media/dvb/ttpci/av7110.c +++ b/drivers/media/dvb/ttpci/av7110.c @@ -2256,7 +2256,7 @@ static int frontend_init(struct av7110 *av7110) if (!av7110->fe) { /* FIXME: propagate the failure code from the lower layers */ ret = -ENOMEM; - printk("dvb-ttpci: A frontend driver was not found for device %04x/%04x subsystem %04x/%04x\n", + printk("dvb-ttpci: A frontend driver was not found for device [%04x:%04x] subsystem [%04x:%04x]\n", av7110->dev->pci->vendor, av7110->dev->pci->device, av7110->dev->pci->subsystem_vendor, diff --git a/drivers/media/dvb/ttpci/budget-av.c b/drivers/media/dvb/ttpci/budget-av.c index b7d1f2f..839c941 100644 --- a/drivers/media/dvb/ttpci/budget-av.c +++ b/drivers/media/dvb/ttpci/budget-av.c @@ -1049,7 +1049,7 @@ static void frontend_init(struct budget_av *budget_av) if (fe == NULL) { printk(KERN_ERR "budget-av: A frontend driver was not found " - "for device %04x/%04x subsystem %04x/%04x\n", + "for device [%04x:%04x] subsystem [%04x:%04x]\n", saa->pci->vendor, saa->pci->device, saa->pci->subsystem_vendor, diff --git a/drivers/media/dvb/ttpci/budget-ci.c b/drivers/media/dvb/ttpci/budget-ci.c index 060e7c7..38dd5cf 100644 --- a/drivers/media/dvb/ttpci/budget-ci.c +++ b/drivers/media/dvb/ttpci/budget-ci.c @@ -1153,7 +1153,7 @@ static void frontend_init(struct budget_ci *budget_ci) } if (budget_ci->budget.dvb_frontend == NULL) { - printk("budget-ci: A frontend driver was not found for device %04x/%04x subsystem %04x/%04x\n", + printk("budget-ci: A frontend driver was not found for device [%04x:%04x] subsystem [%04x:%04x]\n", budget_ci->budget.dev->pci->vendor, budget_ci->budget.dev->pci->device, budget_ci->budget.dev->pci->subsystem_vendor, diff --git a/drivers/media/dvb/ttpci/budget-patch.c b/drivers/media/dvb/ttpci/budget-patch.c index aa5ed4e..bbd234f 100644 --- a/drivers/media/dvb/ttpci/budget-patch.c +++ b/drivers/media/dvb/ttpci/budget-patch.c @@ -360,7 +360,7 @@ static void frontend_init(struct budget_patch* budget) } if (budget->dvb_frontend == NULL) { - printk("dvb-ttpci: A frontend driver was not found for device %04x/%04x subsystem %04x/%04x\n", + printk("dvb-ttpci: A frontend driver was not found for device [%04x:%04x] subsystem [%04x:%04x]\n", budget->dev->pci->vendor, budget->dev->pci->device, budget->dev->pci->subsystem_vendor, diff --git a/drivers/media/dvb/ttpci/budget.c b/drivers/media/dvb/ttpci/budget.c index f006899..851e523 100644 --- a/drivers/media/dvb/ttpci/budget.c +++ b/drivers/media/dvb/ttpci/budget.c @@ -550,7 +550,7 @@ static void frontend_init(struct budget *budget) } if (budget->dvb_frontend == NULL) { - printk("budget: A frontend driver was not found for device %04x/%04x subsystem %04x/%04x\n", + printk("budget: A frontend driver was not found for device [%04x:%04x] subsystem [%04x:%04x]\n", budget->dev->pci->vendor, budget->dev->pci->device, budget->dev->pci->subsystem_vendor, diff --git a/drivers/media/dvb/ttusb-budget/dvb-ttusb-budget.c b/drivers/media/dvb/ttusb-budget/dvb-ttusb-budget.c index e6c9cd2..66ab0c6 100644 --- a/drivers/media/dvb/ttusb-budget/dvb-ttusb-budget.c +++ b/drivers/media/dvb/ttusb-budget/dvb-ttusb-budget.c @@ -1614,7 +1614,7 @@ static void frontend_init(struct ttusb* ttusb) } if (ttusb->fe == NULL) { - printk("dvb-ttusb-budget: A frontend driver was not found for device %04x/%04x\n", + printk("dvb-ttusb-budget: A frontend driver was not found for device [%04x:%04x]\n", le16_to_cpu(ttusb->dev->descriptor.idVendor), le16_to_cpu(ttusb->dev->descriptor.idProduct)); } else { diff --git a/drivers/media/dvb/ttusb-dec/ttusb_dec.c b/drivers/media/dvb/ttusb-dec/ttusb_dec.c index de5829b..ab33fec 100644 --- a/drivers/media/dvb/ttusb-dec/ttusb_dec.c +++ b/drivers/media/dvb/ttusb-dec/ttusb_dec.c @@ -1665,7 +1665,7 @@ static int ttusb_dec_probe(struct usb_interface *intf, } if (dec->fe == NULL) { - printk("dvb-ttusb-dec: A frontend driver was not found for device %04x/%04x\n", + printk("dvb-ttusb-dec: A frontend driver was not found for device [%04x:%04x]\n", le16_to_cpu(dec->udev->descriptor.idVendor), le16_to_cpu(dec->udev->descriptor.idProduct)); } else { diff --git a/drivers/media/video/cx18/cx18-driver.c b/drivers/media/video/cx18/cx18-driver.c index bd18afe..3419de9 100644 --- a/drivers/media/video/cx18/cx18-driver.c +++ b/drivers/media/video/cx18/cx18-driver.c @@ -395,9 +395,9 @@ done: if (cx->card == NULL) { cx->card = cx18_get_card(CX18_CARD_HVR_1600_ESMT); - CX18_ERR("Unknown card: vendor/device: %04x/%04x\n", + CX18_ERR("Unknown card: vendor/device: [%04x:%04x]\n", cx->dev->vendor, cx->dev->device); - CX18_ERR(" subsystem vendor/device: %04x/%04x\n", + CX18_ERR(" subsystem vendor/device: [%04x:%04x]\n", cx->dev->subsystem_vendor, cx->dev->subsystem_device); CX18_ERR("Defaulting to %s card\n", cx->card->name); CX18_ERR("Please mail the vendor/device and subsystem vendor/device IDs and what kind of\n"); diff --git a/drivers/media/video/ivtv/ivtv-driver.c b/drivers/media/video/ivtv/ivtv-driver.c index 4afc7ea..6b04930 100644 --- a/drivers/media/video/ivtv/ivtv-driver.c +++ b/drivers/media/video/ivtv/ivtv-driver.c @@ -655,9 +655,9 @@ done: if (itv->card == NULL) { itv->card = ivtv_get_card(IVTV_CARD_PVR_150); - IVTV_ERR("Unknown card: vendor/device: %04x/%04x\n", + IVTV_ERR("Unknown card: vendor/device: [%04x:%04x]\n", itv->dev->vendor, itv->dev->device); - IVTV_ERR(" subsystem vendor/device: %04x/%04x\n", + IVTV_ERR(" subsystem vendor/device: [%04x:%04x]\n", itv->dev->subsystem_vendor, itv->dev->subsystem_device); IVTV_ERR(" %s based\n", chipname); IVTV_ERR("Defaulting to %s card\n", itv->card->name); -- cgit v0.10.2 From 95fc2ead8406a6d0aa6d8ccf30125f4a50ae323f Mon Sep 17 00:00:00 2001 From: Alexander Beregalov Date: Mon, 21 Jul 2008 16:21:58 -0300 Subject: V4L/DVB (8560): replace __FUNCTION__ with __func__ v4l/drx397xD: replace __FUNCTION__ with __func__ Signed-off-by: Alexander Beregalov Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/dvb/frontends/drx397xD.c b/drivers/media/dvb/frontends/drx397xD.c index 3cbed87..e19147b 100644 --- a/drivers/media/dvb/frontends/drx397xD.c +++ b/drivers/media/dvb/frontends/drx397xD.c @@ -96,7 +96,7 @@ static void drx_release_fw(struct drx397xD_state *s) { fw_ix_t ix = s->chip_rev; - pr_debug("%s\n", __FUNCTION__); + pr_debug("%s\n", __func__); write_lock(&fw[ix].lock); if (fw[ix].refcnt) { @@ -113,7 +113,7 @@ static int drx_load_fw(struct drx397xD_state *s, fw_ix_t ix) size_t size, len; int i = 0, j, rc = -EINVAL; - pr_debug("%s\n", __FUNCTION__); + pr_debug("%s\n", __func__); if (ix < 0 || ix >= ARRAY_SIZE(fw)) return -EINVAL; @@ -197,10 +197,10 @@ static int write_fw(struct drx397xD_state *s, blob_ix_t ix) int len, rc = 0, i = 0; if (ix < 0 || ix >= ARRAY_SIZE(blob_name)) { - pr_debug("%s drx_fw_ix_t out of range\n", __FUNCTION__); + pr_debug("%s drx_fw_ix_t out of range\n", __func__); return -EINVAL; } - pr_debug("%s %s\n", __FUNCTION__, blob_name[ix]); + pr_debug("%s %s\n", __func__, blob_name[ix]); read_lock(&fw[s->chip_rev].lock); data = fw[s->chip_rev].data[ix]; @@ -305,7 +305,7 @@ static int PLL_Set(struct drx397xD_state *s, u32 f_tuner, f = fep->frequency; int rc; - pr_debug("%s\n", __FUNCTION__); + pr_debug("%s\n", __func__); if ((f > s->frontend.ops.tuner_ops.info.frequency_max) || (f < s->frontend.ops.tuner_ops.info.frequency_min)) @@ -325,7 +325,7 @@ static int PLL_Set(struct drx397xD_state *s, return rc; *df_tuner = f_tuner - f; - pr_debug("%s requested %d [Hz] tuner %d [Hz]\n", __FUNCTION__, f, + pr_debug("%s requested %d [Hz] tuner %d [Hz]\n", __func__, f, f_tuner); return 0; @@ -340,7 +340,7 @@ static int SC_WaitForReady(struct drx397xD_state *s) int cnt = 1000; int rc; - pr_debug("%s\n", __FUNCTION__); + pr_debug("%s\n", __func__); while (cnt--) { rc = RD16(s, 0x820043); @@ -354,7 +354,7 @@ static int SC_SendCommand(struct drx397xD_state *s, int cmd) { int rc; - pr_debug("%s\n", __FUNCTION__); + pr_debug("%s\n", __func__); WR16(s, 0x820043, cmd); SC_WaitForReady(s); @@ -368,7 +368,7 @@ static int HI_Command(struct drx397xD_state *s, u16 cmd) { int rc, cnt = 1000; - pr_debug("%s\n", __FUNCTION__); + pr_debug("%s\n", __func__); rc = WR16(s, 0x420032, cmd); if (rc < 0) @@ -389,7 +389,7 @@ static int HI_Command(struct drx397xD_state *s, u16 cmd) static int HI_CfgCommand(struct drx397xD_state *s) { - pr_debug("%s\n", __FUNCTION__); + pr_debug("%s\n", __func__); WR16(s, 0x420033, 0x3973); WR16(s, 0x420034, s->config.w50); // code 4, log 4 @@ -419,7 +419,7 @@ static int SetCfgIfAgc(struct drx397xD_state *s, struct drx397xD_CfgIfAgc *agc) u16 w0C = agc->w0C; int quot, rem, i, rc = -EINVAL; - pr_debug("%s\n", __FUNCTION__); + pr_debug("%s\n", __func__); if (agc->w04 > 0x3ff) goto exit_rc; @@ -478,7 +478,7 @@ static int SetCfgRfAgc(struct drx397xD_state *s, struct drx397xD_CfgRfAgc *agc) u16 w06 = agc->w06; int rc = -1; - pr_debug("%s %d 0x%x 0x%x\n", __FUNCTION__, agc->d00, w04, w06); + pr_debug("%s %d 0x%x 0x%x\n", __func__, agc->d00, w04, w06); if (w04 > 0x3ff) goto exit_rc; @@ -554,7 +554,7 @@ static int CorrectSysClockDeviation(struct drx397xD_state *s) int lockstat; u32 clk, clk_limit; - pr_debug("%s\n", __FUNCTION__); + pr_debug("%s\n", __func__); if (s->config.d5C == 0) { EXIT_RC(WR16(s, 0x08200e8, 0x010)); @@ -598,7 +598,7 @@ static int CorrectSysClockDeviation(struct drx397xD_state *s) if (clk - s->config.f_osc * 1000 + clk_limit <= 2 * clk_limit) { s->f_osc = clk; - pr_debug("%s: osc %d %d [Hz]\n", __FUNCTION__, + pr_debug("%s: osc %d %d [Hz]\n", __func__, s->config.f_osc * 1000, clk - s->config.f_osc * 1000); } rc = WR16(s, 0x08200e8, 0); @@ -610,7 +610,7 @@ static int ConfigureMPEGOutput(struct drx397xD_state *s, int type) { int rc, si, bp; - pr_debug("%s\n", __FUNCTION__); + pr_debug("%s\n", __func__); si = s->config.wA0; if (s->config.w98 == 0) { @@ -646,7 +646,7 @@ static int drx_tune(struct drx397xD_state *s, int rc, df_tuner; int a, b, c, d; - pr_debug("%s %d\n", __FUNCTION__, s->config.d60); + pr_debug("%s %d\n", __func__, s->config.d60); if (s->config.d60 != 2) goto set_tuner; @@ -1082,7 +1082,7 @@ static int drx397x_init(struct dvb_frontend *fe) struct drx397xD_state *s = fe->demodulator_priv; int rc; - pr_debug("%s\n", __FUNCTION__); + pr_debug("%s\n", __func__); s->config.rfagc.d00 = 2; /* 0x7c */ s->config.rfagc.w04 = 0; diff --git a/drivers/media/dvb/frontends/drx397xD.h b/drivers/media/dvb/frontends/drx397xD.h index ddc7a07..2ad1ea0 100644 --- a/drivers/media/dvb/frontends/drx397xD.h +++ b/drivers/media/dvb/frontends/drx397xD.h @@ -122,7 +122,7 @@ extern struct dvb_frontend* drx397xD_attach(const struct drx397xD_config *config static inline struct dvb_frontend* drx397xD_attach(const struct drx397xD_config *config, struct i2c_adapter *i2c) { - printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __FUNCTION__); + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); return NULL; } #endif /* CONFIG_DVB_DRX397XD */ -- cgit v0.10.2 From 95f73c5b57990c97047c200b8746ab62a360c5bc Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Tue, 22 Jul 2008 14:20:12 -0300 Subject: V4L/DVB (8561): make ivtv_claim_stream() static ivtv_claim_stream() can now become static. Signed-off-by: Adrian Bunk Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/ivtv/ivtv-fileops.c b/drivers/media/video/ivtv/ivtv-fileops.c index 7ec5c99..304261e 100644 --- a/drivers/media/video/ivtv/ivtv-fileops.c +++ b/drivers/media/video/ivtv/ivtv-fileops.c @@ -39,7 +39,7 @@ associated VBI streams are also automatically claimed. Possible error returns: -EBUSY if someone else has claimed the stream or 0 on success. */ -int ivtv_claim_stream(struct ivtv_open_id *id, int type) +static int ivtv_claim_stream(struct ivtv_open_id *id, int type) { struct ivtv *itv = id->itv; struct ivtv_stream *s = &itv->streams[type]; diff --git a/drivers/media/video/ivtv/ivtv-fileops.h b/drivers/media/video/ivtv/ivtv-fileops.h index 2c8d518..df81e79 100644 --- a/drivers/media/video/ivtv/ivtv-fileops.h +++ b/drivers/media/video/ivtv/ivtv-fileops.h @@ -38,11 +38,6 @@ void ivtv_unmute(struct ivtv *itv); /* Utilities */ -/* Try to claim a stream for the filehandle. Return 0 on success, - -EBUSY if stream already claimed. Once a stream is claimed, it - remains claimed until the associated filehandle is closed. */ -int ivtv_claim_stream(struct ivtv_open_id *id, int type); - /* Release a previously claimed stream. */ void ivtv_release_stream(struct ivtv_stream *s); -- cgit v0.10.2 From d56dc61265d2527a63ab5b0f03199a43cd89ca36 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Wed, 30 Jul 2008 08:43:36 -0300 Subject: V4L/DVB (8613): v4l: move BKL down to the driver level. The BKL is now moved from the video_open function in v4l2-dev.c to the various drivers. It seems about a third of the drivers already has a lock of some sort protecting the open(), another third uses video_exclusive_open (yuck!) and the last third required adding the BKL in their open function. Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/radio/dsbr100.c b/drivers/media/radio/dsbr100.c index 70c65a7..3a4eb44 100644 --- a/drivers/media/radio/dsbr100.c +++ b/drivers/media/radio/dsbr100.c @@ -407,15 +407,18 @@ static int usb_dsbr100_open(struct inode *inode, struct file *file) { struct dsbr100_device *radio=video_get_drvdata(video_devdata(file)); + lock_kernel(); radio->users = 1; radio->muted = 1; if (dsbr100_start(radio)<0) { warn("Radio did not start up properly"); radio->users = 0; + unlock_kernel(); return -EIO; } dsbr100_setfreq(radio, radio->curfreq); + unlock_kernel(); return 0; } diff --git a/drivers/media/radio/radio-si470x.c b/drivers/media/radio/radio-si470x.c index 16c7ef2..337d557 100644 --- a/drivers/media/radio/radio-si470x.c +++ b/drivers/media/radio/radio-si470x.c @@ -1074,6 +1074,7 @@ static int si470x_fops_open(struct inode *inode, struct file *file) struct si470x_device *radio = video_get_drvdata(video_devdata(file)); int retval; + lock_kernel(); radio->users++; retval = usb_autopm_get_interface(radio->intf); @@ -1090,6 +1091,7 @@ static int si470x_fops_open(struct inode *inode, struct file *file) } done: + unlock_kernel(); return retval; } diff --git a/drivers/media/video/bt8xx/bttv-driver.c b/drivers/media/video/bt8xx/bttv-driver.c index 933eaef..c3526d0 100644 --- a/drivers/media/video/bt8xx/bttv-driver.c +++ b/drivers/media/video/bt8xx/bttv-driver.c @@ -3227,6 +3227,7 @@ static int bttv_open(struct inode *inode, struct file *file) dprintk(KERN_DEBUG "bttv: open minor=%d\n",minor); + lock_kernel(); for (i = 0; i < bttv_num; i++) { if (bttvs[i].video_dev && bttvs[i].video_dev->minor == minor) { @@ -3241,16 +3242,20 @@ static int bttv_open(struct inode *inode, struct file *file) break; } } - if (NULL == btv) + if (NULL == btv) { + unlock_kernel(); return -ENODEV; + } dprintk(KERN_DEBUG "bttv%d: open called (type=%s)\n", btv->c.nr,v4l2_type_names[type]); /* allocate per filehandle data */ fh = kmalloc(sizeof(*fh),GFP_KERNEL); - if (NULL == fh) + if (NULL == fh) { + unlock_kernel(); return -ENOMEM; + } file->private_data = fh; *fh = btv->init; fh->type = type; @@ -3290,6 +3295,7 @@ static int bttv_open(struct inode *inode, struct file *file) bttv_vbi_fmt_reset(&fh->vbi_fmt, btv->tvnorm); bttv_field_count(btv); + unlock_kernel(); return 0; } @@ -3430,21 +3436,26 @@ static int radio_open(struct inode *inode, struct file *file) dprintk("bttv: open minor=%d\n",minor); + lock_kernel(); for (i = 0; i < bttv_num; i++) { if (bttvs[i].radio_dev && bttvs[i].radio_dev->minor == minor) { btv = &bttvs[i]; break; } } - if (NULL == btv) + if (NULL == btv) { + unlock_kernel(); return -ENODEV; + } dprintk("bttv%d: open called (radio)\n",btv->c.nr); /* allocate per filehandle data */ fh = kmalloc(sizeof(*fh), GFP_KERNEL); - if (NULL == fh) + if (NULL == fh) { + unlock_kernel(); return -ENOMEM; + } file->private_data = fh; *fh = btv->init; v4l2_prio_open(&btv->prio, &fh->prio); @@ -3457,6 +3468,7 @@ static int radio_open(struct inode *inode, struct file *file) audio_input(btv,TVAUDIO_INPUT_RADIO); mutex_unlock(&btv->lock); + unlock_kernel(); return 0; } diff --git a/drivers/media/video/cafe_ccic.c b/drivers/media/video/cafe_ccic.c index 5405c30..e9994c8 100644 --- a/drivers/media/video/cafe_ccic.c +++ b/drivers/media/video/cafe_ccic.c @@ -1476,9 +1476,12 @@ static int cafe_v4l_open(struct inode *inode, struct file *filp) { struct cafe_camera *cam; + lock_kernel(); cam = cafe_find_dev(iminor(inode)); - if (cam == NULL) + if (cam == NULL) { + unlock_kernel(); return -ENODEV; + } filp->private_data = cam; mutex_lock(&cam->s_mutex); @@ -1490,6 +1493,7 @@ static int cafe_v4l_open(struct inode *inode, struct file *filp) } (cam->users)++; mutex_unlock(&cam->s_mutex); + unlock_kernel(); return 0; } diff --git a/drivers/media/video/cx23885/cx23885-417.c b/drivers/media/video/cx23885/cx23885-417.c index 7b0e8c0..93777d0 100644 --- a/drivers/media/video/cx23885/cx23885-417.c +++ b/drivers/media/video/cx23885/cx23885-417.c @@ -1583,6 +1583,7 @@ static int mpeg_open(struct inode *inode, struct file *file) dprintk(2, "%s()\n", __func__); + lock_kernel(); list_for_each(list, &cx23885_devlist) { h = list_entry(list, struct cx23885_dev, devlist); if (h->v4l_device->minor == minor) { @@ -1591,13 +1592,17 @@ static int mpeg_open(struct inode *inode, struct file *file) } } - if (dev == NULL) + if (dev == NULL) { + unlock_kernel(); return -ENODEV; + } /* allocate + initialize per filehandle data */ fh = kzalloc(sizeof(*fh), GFP_KERNEL); - if (NULL == fh) + if (NULL == fh) { + unlock_kernel(); return -ENOMEM; + } file->private_data = fh; fh->dev = dev; @@ -1608,6 +1613,7 @@ static int mpeg_open(struct inode *inode, struct file *file) V4L2_FIELD_INTERLACED, sizeof(struct cx23885_buffer), fh); + unlock_kernel(); return 0; } diff --git a/drivers/media/video/cx23885/cx23885-video.c b/drivers/media/video/cx23885/cx23885-video.c index 6047c78..d9bef1a 100644 --- a/drivers/media/video/cx23885/cx23885-video.c +++ b/drivers/media/video/cx23885/cx23885-video.c @@ -731,6 +731,7 @@ static int video_open(struct inode *inode, struct file *file) enum v4l2_buf_type type = 0; int radio = 0; + lock_kernel(); list_for_each(list, &cx23885_devlist) { h = list_entry(list, struct cx23885_dev, devlist); if (h->video_dev->minor == minor) { @@ -748,16 +749,20 @@ static int video_open(struct inode *inode, struct file *file) dev = h; } } - if (NULL == dev) + if (NULL == dev) { + unlock_kernel(); return -ENODEV; + } dprintk(1, "open minor=%d radio=%d type=%s\n", minor, radio, v4l2_type_names[type]); /* allocate + initialize per filehandle data */ fh = kzalloc(sizeof(*fh), GFP_KERNEL); - if (NULL == fh) + if (NULL == fh) { + unlock_kernel(); return -ENOMEM; + } file->private_data = fh; fh->dev = dev; fh->radio = radio; @@ -775,6 +780,7 @@ static int video_open(struct inode *inode, struct file *file) dprintk(1, "post videobuf_queue_init()\n"); + unlock_kernel(); return 0; } diff --git a/drivers/media/video/cx88/cx88-blackbird.c b/drivers/media/video/cx88/cx88-blackbird.c index 9a1374a..1b7e2e4 100644 --- a/drivers/media/video/cx88/cx88-blackbird.c +++ b/drivers/media/video/cx88/cx88-blackbird.c @@ -1057,12 +1057,15 @@ static int mpeg_open(struct inode *inode, struct file *file) struct cx8802_driver *drv = NULL; int err; + lock_kernel(); dev = cx8802_get_device(inode); dprintk( 1, "%s\n", __func__); - if (dev == NULL) + if (dev == NULL) { + unlock_kernel(); return -ENODEV; + } /* Make sure we can acquire the hardware */ drv = cx8802_get_driver(dev, CX88_MPEG_BLACKBIRD); @@ -1077,6 +1080,7 @@ static int mpeg_open(struct inode *inode, struct file *file) if (blackbird_initialize_codec(dev) < 0) { if (drv) drv->request_release(drv); + unlock_kernel(); return -EINVAL; } dprintk(1,"open minor=%d\n",minor); @@ -1086,6 +1090,7 @@ static int mpeg_open(struct inode *inode, struct file *file) if (NULL == fh) { if (drv) drv->request_release(drv); + unlock_kernel(); return -ENOMEM; } file->private_data = fh; @@ -1101,6 +1106,7 @@ static int mpeg_open(struct inode *inode, struct file *file) /* FIXME: locking against other video device */ cx88_set_scale(dev->core, dev->width, dev->height, fh->mpegq.field); + unlock_kernel(); return 0; } diff --git a/drivers/media/video/cx88/cx88-video.c b/drivers/media/video/cx88/cx88-video.c index ef4d56e..61e03d4 100644 --- a/drivers/media/video/cx88/cx88-video.c +++ b/drivers/media/video/cx88/cx88-video.c @@ -773,6 +773,7 @@ static int video_open(struct inode *inode, struct file *file) enum v4l2_buf_type type = 0; int radio = 0; + lock_kernel(); list_for_each_entry(h, &cx8800_devlist, devlist) { if (h->video_dev->minor == minor) { dev = h; @@ -788,8 +789,10 @@ static int video_open(struct inode *inode, struct file *file) dev = h; } } - if (NULL == dev) + if (NULL == dev) { + unlock_kernel(); return -ENODEV; + } core = dev->core; @@ -798,8 +801,10 @@ static int video_open(struct inode *inode, struct file *file) /* allocate + initialize per filehandle data */ fh = kzalloc(sizeof(*fh),GFP_KERNEL); - if (NULL == fh) + if (NULL == fh) { + unlock_kernel(); return -ENOMEM; + } file->private_data = fh; fh->dev = dev; fh->radio = radio; @@ -832,6 +837,7 @@ static int video_open(struct inode *inode, struct file *file) cx88_set_stereo(core,V4L2_TUNER_MODE_STEREO,1); cx88_call_i2c_clients(core,AUDC_SET_RADIO,NULL); } + unlock_kernel(); return 0; } diff --git a/drivers/media/video/em28xx/em28xx-video.c b/drivers/media/video/em28xx/em28xx-video.c index 49ab062..600b340 100644 --- a/drivers/media/video/em28xx/em28xx-video.c +++ b/drivers/media/video/em28xx/em28xx-video.c @@ -1512,6 +1512,7 @@ static int em28xx_v4l2_open(struct inode *inode, struct file *filp) struct em28xx_fh *fh; enum v4l2_buf_type fh_type = 0; + lock_kernel(); list_for_each_entry(h, &em28xx_devlist, devlist) { if (h->vdev->minor == minor) { dev = h; @@ -1527,8 +1528,10 @@ static int em28xx_v4l2_open(struct inode *inode, struct file *filp) dev = h; } } - if (NULL == dev) + if (NULL == dev) { + unlock_kernel(); return -ENODEV; + } em28xx_videodbg("open minor=%d type=%s users=%d\n", minor, v4l2_type_names[fh_type], dev->users); @@ -1537,6 +1540,7 @@ static int em28xx_v4l2_open(struct inode *inode, struct file *filp) fh = kzalloc(sizeof(struct em28xx_fh), GFP_KERNEL); if (!fh) { em28xx_errdev("em28xx-video.c: Out of memory?!\n"); + unlock_kernel(); return -ENOMEM; } mutex_lock(&dev->lock); @@ -1573,6 +1577,7 @@ static int em28xx_v4l2_open(struct inode *inode, struct file *filp) sizeof(struct em28xx_buffer), fh); mutex_unlock(&dev->lock); + unlock_kernel(); return errCode; } diff --git a/drivers/media/video/meye.c b/drivers/media/video/meye.c index a9ef780..cdaff2f 100644 --- a/drivers/media/video/meye.c +++ b/drivers/media/video/meye.c @@ -845,15 +845,19 @@ static int meye_open(struct inode *inode, struct file *file) { int i, err; + lock_kernel(); err = video_exclusive_open(inode, file); - if (err < 0) + if (err < 0) { + unlock_kernel(); return err; + } mchip_hic_stop(); if (mchip_dma_alloc()) { printk(KERN_ERR "meye: mchip framebuffer allocation failed\n"); video_exclusive_release(inode, file); + unlock_kernel(); return -ENOBUFS; } @@ -861,6 +865,7 @@ static int meye_open(struct inode *inode, struct file *file) meye.grab_buffer[i].state = MEYE_BUF_UNUSED; kfifo_reset(meye.grabq); kfifo_reset(meye.doneq); + unlock_kernel(); return 0; } diff --git a/drivers/media/video/pvrusb2/pvrusb2-v4l2.c b/drivers/media/video/pvrusb2/pvrusb2-v4l2.c index 00306fa..26ffaa2 100644 --- a/drivers/media/video/pvrusb2/pvrusb2-v4l2.c +++ b/drivers/media/video/pvrusb2/pvrusb2-v4l2.c @@ -932,6 +932,7 @@ static int pvr2_v4l2_open(struct inode *inode, struct file *file) unsigned int input_cnt,idx; int ret = 0; + lock_kernel(); dip = container_of(video_devdata(file),struct pvr2_v4l2_dev,devbase); vp = dip->v4lp; @@ -942,11 +943,13 @@ static int pvr2_v4l2_open(struct inode *inode, struct file *file) if (!pvr2_hdw_dev_ok(hdw)) { pvr2_trace(PVR2_TRACE_OPEN_CLOSE, "pvr2_v4l2_open: hardware not ready"); + unlock_kernel(); return -EIO; } fhp = kzalloc(sizeof(*fhp),GFP_KERNEL); if (!fhp) { + unlock_kernel(); return -ENOMEM; } @@ -976,6 +979,7 @@ static int pvr2_v4l2_open(struct inode *inode, struct file *file) fhp); kfree(fhp); + unlock_kernel(); return ret; } @@ -992,6 +996,7 @@ static int pvr2_v4l2_open(struct inode *inode, struct file *file) "Destroying pvr_v4l2_fh id=%p (input map failure)", fhp); kfree(fhp); + unlock_kernel(); return -ENOMEM; } input_cnt = 0; @@ -1015,6 +1020,7 @@ static int pvr2_v4l2_open(struct inode *inode, struct file *file) v4l2_prio_open(&vp->prio,&fhp->prio); fhp->fw_mode_flag = pvr2_hdw_cpufw_get_enabled(hdw); + unlock_kernel(); return 0; } diff --git a/drivers/media/video/s2255drv.c b/drivers/media/video/s2255drv.c index 92b83fe..de39cf0 100644 --- a/drivers/media/video/s2255drv.c +++ b/drivers/media/video/s2255drv.c @@ -1457,6 +1457,7 @@ static int s2255_open(struct inode *inode, struct file *file) int cur_channel = -1; dprintk(1, "s2255: open called (minor=%d)\n", minor); + lock_kernel(); list_for_each(list, &s2255_devlist) { h = list_entry(list, struct s2255_dev, s2255_devlist); for (i = 0; i < MAX_CHANNELS; i++) { @@ -1469,6 +1470,7 @@ static int s2255_open(struct inode *inode, struct file *file) } if ((NULL == dev) || (cur_channel == -1)) { + unlock_kernel(); dprintk(1, "s2255: openv4l no dev\n"); return -ENODEV; } @@ -1490,6 +1492,7 @@ static int s2255_open(struct inode *inode, struct file *file) printk(KERN_INFO "2255 FW load failed.\n"); dev->users[cur_channel]--; mutex_unlock(&dev->open_lock); + unlock_kernel(); return -EFAULT; } } else if (atomic_read(&dev->fw_data->fw_state) == S2255_FW_NOTLOADED) { @@ -1506,6 +1509,7 @@ static int s2255_open(struct inode *inode, struct file *file) "try again\n"); dev->users[cur_channel]--; mutex_unlock(&dev->open_lock); + unlock_kernel(); return -EBUSY; } } @@ -1515,6 +1519,7 @@ static int s2255_open(struct inode *inode, struct file *file) if (NULL == fh) { dev->users[cur_channel]--; mutex_unlock(&dev->open_lock); + unlock_kernel(); return -ENOMEM; } @@ -1548,6 +1553,7 @@ static int s2255_open(struct inode *inode, struct file *file) kref_get(&dev->kref); mutex_unlock(&dev->open_lock); + unlock_kernel(); return 0; } diff --git a/drivers/media/video/saa5246a.c b/drivers/media/video/saa5246a.c index 6ee63e6..e2c538e 100644 --- a/drivers/media/video/saa5246a.c +++ b/drivers/media/video/saa5246a.c @@ -44,6 +44,7 @@ #include #include #include +#include #include #include #include @@ -737,9 +738,12 @@ static int saa5246a_open(struct inode *inode, struct file *file) struct saa5246a_device *t = vd->priv; int err; + lock_kernel(); err = video_exclusive_open(inode,file); - if (err < 0) + if (err < 0) { + unlock_kernel(); return err; + } if (t->client==NULL) { err = -ENODEV; @@ -776,11 +780,13 @@ static int saa5246a_open(struct inode *inode, struct file *file) err = -EIO; goto fail; } + unlock_kernel(); return 0; fail: video_exclusive_release(inode,file); + unlock_kernel(); return err; } diff --git a/drivers/media/video/saa5249.c b/drivers/media/video/saa5249.c index 0d63973..96c0fdf 100644 --- a/drivers/media/video/saa5249.c +++ b/drivers/media/video/saa5249.c @@ -52,6 +52,7 @@ #include #include #include +#include #include #include #include @@ -633,9 +634,12 @@ static int saa5249_open(struct inode *inode, struct file *file) struct saa5249_device *t=vd->priv; int err,pgbuf; + lock_kernel(); err = video_exclusive_open(inode,file); - if (err < 0) + if (err < 0) { + unlock_kernel(); return err; + } if (t->client==NULL) { err = -ENODEV; @@ -664,10 +668,12 @@ static int saa5249_open(struct inode *inode, struct file *file) t->is_searching[pgbuf] = false; } t->virtual_mode = false; + unlock_kernel(); return 0; fail: video_exclusive_release(inode,file); + unlock_kernel(); return err; } diff --git a/drivers/media/video/saa7134/saa7134-empress.c b/drivers/media/video/saa7134/saa7134-empress.c index c0c5d75..6f423d1 100644 --- a/drivers/media/video/saa7134/saa7134-empress.c +++ b/drivers/media/video/saa7134/saa7134-empress.c @@ -79,9 +79,11 @@ static int ts_open(struct inode *inode, struct file *file) struct saa7134_dev *dev; int err; + lock_kernel(); list_for_each_entry(dev, &saa7134_devlist, devlist) if (dev->empress_dev && dev->empress_dev->minor == minor) goto found; + unlock_kernel(); return -ENODEV; found: @@ -103,6 +105,7 @@ static int ts_open(struct inode *inode, struct file *file) done_up: mutex_unlock(&dev->empress_tsq.vb_lock); done: + unlock_kernel(); return err; } diff --git a/drivers/media/video/saa7134/saa7134-video.c b/drivers/media/video/saa7134/saa7134-video.c index 68c2689..8fd3113 100644 --- a/drivers/media/video/saa7134/saa7134-video.c +++ b/drivers/media/video/saa7134/saa7134-video.c @@ -1330,6 +1330,8 @@ static int video_open(struct inode *inode, struct file *file) struct saa7134_fh *fh; enum v4l2_buf_type type = V4L2_BUF_TYPE_VIDEO_CAPTURE; int radio = 0; + + lock_kernel(); list_for_each_entry(dev, &saa7134_devlist, devlist) { if (dev->video_dev && (dev->video_dev->minor == minor)) goto found; @@ -1342,6 +1344,7 @@ static int video_open(struct inode *inode, struct file *file) goto found; } } + unlock_kernel(); return -ENODEV; found: @@ -1350,8 +1353,10 @@ static int video_open(struct inode *inode, struct file *file) /* allocate + initialize per filehandle data */ fh = kzalloc(sizeof(*fh),GFP_KERNEL); - if (NULL == fh) + if (NULL == fh) { + unlock_kernel(); return -ENOMEM; + } file->private_data = fh; fh->dev = dev; fh->radio = radio; @@ -1384,6 +1389,7 @@ static int video_open(struct inode *inode, struct file *file) /* switch to video/vbi mode */ video_mux(dev,dev->ctl_input); } + unlock_kernel(); return 0; } diff --git a/drivers/media/video/se401.c b/drivers/media/video/se401.c index acceed5..d16bbf0 100644 --- a/drivers/media/video/se401.c +++ b/drivers/media/video/se401.c @@ -936,14 +936,18 @@ static int se401_open(struct inode *inode, struct file *file) struct usb_se401 *se401 = (struct usb_se401 *)dev; int err = 0; - if (se401->user) + lock_kernel(); + if (se401->user) { + unlock_kernel(); return -EBUSY; + } se401->fbuf = rvmalloc(se401->maxframesize * SE401_NUMFRAMES); if (se401->fbuf) file->private_data = dev; else err = -ENOMEM; se401->user = !err; + unlock_kernel(); return err; } diff --git a/drivers/media/video/stk-webcam.c b/drivers/media/video/stk-webcam.c index ad36af3..6b1ef5d 100644 --- a/drivers/media/video/stk-webcam.c +++ b/drivers/media/video/stk-webcam.c @@ -689,11 +689,15 @@ static int v4l_stk_open(struct inode *inode, struct file *fp) vdev = video_devdata(fp); dev = vdev_to_camera(vdev); - if (dev == NULL || !is_present(dev)) + lock_kernel(); + if (dev == NULL || !is_present(dev)) { + unlock_kernel(); return -ENXIO; + } fp->private_data = vdev; kref_get(&dev->kref); usb_autopm_get_interface(dev->interface); + unlock_kernel(); return 0; } diff --git a/drivers/media/video/stradis.c b/drivers/media/video/stradis.c index 276bded..a3cbe9b 100644 --- a/drivers/media/video/stradis.c +++ b/drivers/media/video/stradis.c @@ -1882,12 +1882,16 @@ static int saa_open(struct inode *inode, struct file *file) struct video_device *vdev = video_devdata(file); struct saa7146 *saa = container_of(vdev, struct saa7146, video_dev); + lock_kernel(); file->private_data = saa; saa->user++; - if (saa->user > 1) + if (saa->user > 1) { + unlock_kernel(); return 0; /* device open already, don't reset */ + } saa->writemode = VID_WRITE_MPEG_VID; /* default to video */ + unlock_kernel(); return 0; } diff --git a/drivers/media/video/stv680.c b/drivers/media/video/stv680.c index dce9474..b21a8d6 100644 --- a/drivers/media/video/stv680.c +++ b/drivers/media/video/stv680.c @@ -1086,6 +1086,7 @@ static int stv_open (struct inode *inode, struct file *file) int err = 0; /* we are called with the BKL held */ + lock_kernel(); stv680->user = 1; err = stv_init (stv680); /* main initialization routine for camera */ @@ -1099,6 +1100,7 @@ static int stv_open (struct inode *inode, struct file *file) } if (err) stv680->user = 0; + unlock_kernel(); return err; } diff --git a/drivers/media/video/usbvideo/vicam.c b/drivers/media/video/usbvideo/vicam.c index 2eb4582..efb878a 100644 --- a/drivers/media/video/usbvideo/vicam.c +++ b/drivers/media/video/usbvideo/vicam.c @@ -488,20 +488,24 @@ vicam_open(struct inode *inode, struct file *file) * rely on this fact forever. */ + lock_kernel(); if (cam->open_count > 0) { printk(KERN_INFO "vicam_open called on already opened camera"); + unlock_kernel(); return -EBUSY; } cam->raw_image = kmalloc(VICAM_MAX_READ_SIZE, GFP_KERNEL); if (!cam->raw_image) { + unlock_kernel(); return -ENOMEM; } cam->framebuf = rvmalloc(VICAM_MAX_FRAME_SIZE * VICAM_FRAMES); if (!cam->framebuf) { kfree(cam->raw_image); + unlock_kernel(); return -ENOMEM; } @@ -509,6 +513,7 @@ vicam_open(struct inode *inode, struct file *file) if (!cam->cntrlbuf) { kfree(cam->raw_image); rvfree(cam->framebuf, VICAM_MAX_FRAME_SIZE * VICAM_FRAMES); + unlock_kernel(); return -ENOMEM; } @@ -526,6 +531,7 @@ vicam_open(struct inode *inode, struct file *file) cam->open_count++; file->private_data = cam; + unlock_kernel(); return 0; } diff --git a/drivers/media/video/usbvision/usbvision-video.c b/drivers/media/video/usbvision/usbvision-video.c index b977116..b76295a 100644 --- a/drivers/media/video/usbvision/usbvision-video.c +++ b/drivers/media/video/usbvision/usbvision-video.c @@ -367,6 +367,7 @@ static int usbvision_v4l2_open(struct inode *inode, struct file *file) PDEBUG(DBG_IO, "open"); + lock_kernel(); usbvision_reset_powerOffTimer(usbvision); if (usbvision->user) @@ -424,6 +425,7 @@ static int usbvision_v4l2_open(struct inode *inode, struct file *file) usbvision_empty_framequeues(usbvision); PDEBUG(DBG_IO, "success"); + unlock_kernel(); return errCode; } diff --git a/drivers/media/video/v4l2-dev.c b/drivers/media/video/v4l2-dev.c index 155fdec..6b9f3cb 100644 --- a/drivers/media/video/v4l2-dev.c +++ b/drivers/media/video/v4l2-dev.c @@ -116,7 +116,6 @@ static int video_open(struct inode *inode, struct file *file) if (minor >= VIDEO_NUM_DEVICES) return -ENODEV; - lock_kernel(); mutex_lock(&videodev_lock); vfl = video_device[minor]; if (vfl == NULL) { @@ -126,7 +125,6 @@ static int video_open(struct inode *inode, struct file *file) vfl = video_device[minor]; if (vfl == NULL) { mutex_unlock(&videodev_lock); - unlock_kernel(); return -ENODEV; } } @@ -140,7 +138,6 @@ static int video_open(struct inode *inode, struct file *file) } fops_put(old_fops); mutex_unlock(&videodev_lock); - unlock_kernel(); return err; } diff --git a/drivers/media/video/vivi.c b/drivers/media/video/vivi.c index 8ba8daa..65c8af1 100644 --- a/drivers/media/video/vivi.c +++ b/drivers/media/video/vivi.c @@ -898,9 +898,11 @@ static int vivi_open(struct inode *inode, struct file *file) printk(KERN_DEBUG "vivi: open called (minor=%d)\n", minor); + lock_kernel(); list_for_each_entry(dev, &vivi_devlist, vivi_devlist) if (dev->vfd->minor == minor) goto found; + unlock_kernel(); return -ENODEV; found: @@ -925,8 +927,10 @@ found: } unlock: mutex_unlock(&dev->mutex); - if (retval) + if (retval) { + unlock_kernel(); return retval; + } file->private_data = fh; fh->dev = dev; @@ -955,6 +959,7 @@ unlock: sizeof(struct vivi_buffer), fh); vivi_start_thread(fh); + unlock_kernel(); return 0; } diff --git a/drivers/media/video/zoran_driver.c b/drivers/media/video/zoran_driver.c index 2dab9ee..4aa1a76 100644 --- a/drivers/media/video/zoran_driver.c +++ b/drivers/media/video/zoran_driver.c @@ -1211,6 +1211,7 @@ zoran_open (struct inode *inode, struct zoran_fh *fh; int i, res, first_open = 0, have_module_locks = 0; + lock_kernel(); /* find the device */ for (i = 0; i < zoran_num; i++) { if (zoran[i]->video_dev->minor == minor) { @@ -1321,6 +1322,7 @@ zoran_open (struct inode *inode, file->private_data = fh; fh->zr = zr; zoran_open_init_session(file); + unlock_kernel(); return 0; @@ -1338,6 +1340,7 @@ open_unlock_and_return: if (zr) { /*mutex_unlock(&zr->resource_lock);*/ } + unlock_kernel(); return res; } diff --git a/drivers/media/video/zr364xx.c b/drivers/media/video/zr364xx.c index 18d1c4b..4e1ef10 100644 --- a/drivers/media/video/zr364xx.c +++ b/drivers/media/video/zr364xx.c @@ -643,14 +643,18 @@ static int zr364xx_open(struct inode *inode, struct file *file) cam->skip = 2; + lock_kernel(); err = video_exclusive_open(inode, file); - if (err < 0) + if (err < 0) { + unlock_kernel(); return err; + } if (!cam->framebuf) { cam->framebuf = vmalloc_32(MAX_FRAME_SIZE * FRAMES); if (!cam->framebuf) { info("vmalloc_32 failed!"); + unlock_kernel(); return -ENOMEM; } } @@ -664,6 +668,7 @@ static int zr364xx_open(struct inode *inode, struct file *file) if (err < 0) { info("error during open sequence: %d", i); mutex_unlock(&cam->lock); + unlock_kernel(); return err; } } @@ -676,6 +681,7 @@ static int zr364xx_open(struct inode *inode, struct file *file) mdelay(100); mutex_unlock(&cam->lock); + unlock_kernel(); return 0; } -- cgit v0.10.2 From 622ecb300345d308c8b4a983ac112b1985d7d156 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Tue, 5 Aug 2008 10:03:17 -0300 Subject: V4L/DVB (8625): saa7134: Add NEC prococol IR decoding capability This patch adds the capability of decoding NEC protocol, received via GPIO18 line. This GPIO port can trigger saa7134 IRQ. A future improvement would be to make it a little more generic to work also with GPIO16 line. A pure IRQ code didn't work, since some delays were introduced on the tests we did. A possible approach would be to use polling at a rate of 2.5 ms or less. If a new code were taken, a code similar to nec_task() could be used. However, this would add an extra overhead to kernel, and will consume more power. Due to that, we took an hybrid approach: an IRQ upper half to trigger when a new key is received and a bottom half to convert pulse-distance into a keycode. The bottom half is polling based, to improve performance. During the bottom half proccess, GPIO18 IRQ line is disabled, preventing IRQ reentrancy and improving performance a little bit. Thanks to Sistema Fenix (http://www.sistemafenix.com.br/) for sponsoring this development. Signed-off-by: Gilberto Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/saa7134/saa7134-input.c b/drivers/media/video/saa7134/saa7134-input.c index ad08d13..ac6beb2 100644 --- a/drivers/media/video/saa7134/saa7134-input.c +++ b/drivers/media/video/saa7134/saa7134-input.c @@ -62,8 +62,11 @@ MODULE_PARM_DESC(disable_other_ir, "disable full codes of " #define i2cdprintk(fmt, arg...) if (ir_debug) \ printk(KERN_DEBUG "%s/ir: " fmt, ir->c.name , ## arg) -/** rc5 functions */ +/* Helper functions for RC5 and NEC decoding at GPIO16 or GPIO18 */ static int saa7134_rc5_irq(struct saa7134_dev *dev); +static int saa7134_nec_irq(struct saa7134_dev *dev); +static void nec_task(unsigned long data); +static void saa7134_nec_timer(unsigned long data); /* -------------------- GPIO generic keycode builder -------------------- */ @@ -280,7 +283,9 @@ void saa7134_input_irq(struct saa7134_dev *dev) { struct card_ir *ir = dev->remote; - if (!ir->polling && !ir->rc5_gpio) { + if (ir->nec_gpio) { + saa7134_nec_irq(dev); + } else if (!ir->polling && !ir->rc5_gpio) { build_key(dev); } else if (ir->rc5_gpio) { saa7134_rc5_irq(dev); @@ -316,6 +321,10 @@ void saa7134_ir_start(struct saa7134_dev *dev, struct card_ir *ir) ir->addr = 0x17; ir->rc5_key_timeout = ir_rc5_key_timeout; ir->rc5_remote_gap = ir_rc5_remote_gap; + } else if (ir->nec_gpio) { + setup_timer(&ir->timer_keyup, saa7134_nec_timer, + (unsigned long)dev); + tasklet_init(&ir->tlet, nec_task, (unsigned long)dev); } } @@ -335,6 +344,7 @@ int saa7134_input_init1(struct saa7134_dev *dev) u32 mask_keyup = 0; int polling = 0; int rc5_gpio = 0; + int nec_gpio = 0; int ir_type = IR_TYPE_OTHER; int err; @@ -533,6 +543,7 @@ int saa7134_input_init1(struct saa7134_dev *dev) ir->mask_keyup = mask_keyup; ir->polling = polling; ir->rc5_gpio = rc5_gpio; + ir->nec_gpio = nec_gpio; /* init input device */ snprintf(ir->name, sizeof(ir->name), "saa7134 IR (%s)", @@ -675,8 +686,125 @@ static int saa7134_rc5_irq(struct saa7134_dev *dev) return 1; } -/* ---------------------------------------------------------------------- - * Local variables: - * c-basic-offset: 8 - * End: + +/* On NEC protocol, One has 2.25 ms, and zero has 1.125 ms + The first pulse (start) has 9 + 4.5 ms */ + +static void saa7134_nec_timer(unsigned long data) +{ + struct saa7134_dev *dev = (struct saa7134_dev *) data; + struct card_ir *ir = dev->remote; + + dprintk("Cancel key repeat\n"); + + ir_input_nokey(ir->dev, &ir->ir); +} + +static void nec_task(unsigned long data) +{ + struct saa7134_dev *dev = (struct saa7134_dev *) data; + struct card_ir *ir; + struct timeval tv; + int count, pulse, oldpulse, gap; + u32 ircode = 0, not_code = 0; + int ngap = 0; + + if (!data) { + printk(KERN_ERR "saa713x/ir: Can't recover dev struct\n"); + /* GPIO will be kept disabled */ + return; + } + + ir = dev->remote; + + /* rising SAA7134_GPIO_GPRESCAN reads the status */ + saa_clearb(SAA7134_GPIO_GPMODE3, SAA7134_GPIO_GPRESCAN); + saa_setb(SAA7134_GPIO_GPMODE3, SAA7134_GPIO_GPRESCAN); + + oldpulse = saa_readl(SAA7134_GPIO_GPSTATUS0 >> 2) & ir->mask_keydown; + pulse = oldpulse; + + do_gettimeofday(&tv); + ir->base_time = tv; + + /* Decode NEC pulsecode. This code can take up to 76.5 ms to run. + Unfortunately, using IRQ to decode pulse didn't work, since it uses + a pulse train of 38KHz. This means one pulse on each 52 us + */ + do { + /* Wait until the end of pulse/space or 5 ms */ + for (count = 0; count < 500; count++) { + udelay(10); + /* rising SAA7134_GPIO_GPRESCAN reads the status */ + saa_clearb(SAA7134_GPIO_GPMODE3, SAA7134_GPIO_GPRESCAN); + saa_setb(SAA7134_GPIO_GPMODE3, SAA7134_GPIO_GPRESCAN); + pulse = saa_readl(SAA7134_GPIO_GPSTATUS0 >> 2) + & ir->mask_keydown; + if (pulse != oldpulse) + break; + } + + do_gettimeofday(&tv); + gap = 1000000 * (tv.tv_sec - ir->base_time.tv_sec) + + tv.tv_usec - ir->base_time.tv_usec; + + if (!pulse) { + /* Bit 0 has 560 us, while bit 1 has 1120 us. + Do something only if bit == 1 + */ + if (ngap && (gap > 560 + 280)) { + unsigned int shift = ngap - 1; + + /* Address first, then command */ + if (shift < 8) { + shift += 8; + ircode |= 1 << shift; + } else if (shift < 16) { + not_code |= 1 << shift; + } else if (shift < 24) { + shift -= 16; + ircode |= 1 << shift; + } else { + shift -= 24; + not_code |= 1 << shift; + } + } + ngap++; + } + + + ir->base_time = tv; + + /* TIMEOUT - Long pulse */ + if (gap >= 5000) + break; + oldpulse = pulse; + } while (ngap < 32); + + if (ngap == 32) { + /* FIXME: should check if not_code == ~ircode */ + ir->code = ir_extract_bits(ircode, ir->mask_keycode); + + dprintk("scancode = 0x%02x (code = 0x%02x, notcode= 0x%02x)\n", + ir->code, ircode, not_code); + + ir_input_keydown(ir->dev, &ir->ir, ir->code, ir->code); + } else + dprintk("Repeat last key\n"); + + /* Keep repeating the last key */ + mod_timer(&ir->timer_keyup, jiffies + msecs_to_jiffies(150)); + + saa_setl(SAA7134_IRQ2, SAA7134_IRQ2_INTE_GPIO18); +} + +static int saa7134_nec_irq(struct saa7134_dev *dev) +{ + struct card_ir *ir = dev->remote; + + saa_clearl(SAA7134_IRQ2, SAA7134_IRQ2_INTE_GPIO18); + tasklet_schedule(&ir->tlet); + + return 1; +} diff --git a/include/media/ir-common.h b/include/media/ir-common.h index b8e8aa9..f5566d4 100644 --- a/include/media/ir-common.h +++ b/include/media/ir-common.h @@ -25,6 +25,7 @@ #include #include +#include #define IR_TYPE_RC5 1 #define IR_TYPE_PD 2 /* Pulse distance encoded IR */ @@ -85,6 +86,10 @@ struct card_ir { u32 code; /* raw code under construction */ struct timeval base_time; /* time of last seen code */ int active; /* building raw code */ + + /* NEC decoding */ + u32 nec_gpio; + struct tasklet_struct tlet; }; void ir_input_init(struct input_dev *dev, struct ir_input_state *ir, -- cgit v0.10.2 From 8f2b7b70600212f8c809a7bc2d17d33561842440 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Tue, 5 Aug 2008 10:11:25 -0300 Subject: V4L/DVB (8626): Add support for TCL tuner MF02GIP-5N-E Thanks to Sistema Fenix (http://www.sistemafenix.com.br/) and CDI Brasil (www.cdibrasil.com.br/) for sponsoring this development. Signed-off-by: Gilberto Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Mauro Carvalho Chehab diff --git a/Documentation/video4linux/CARDLIST.tuner b/Documentation/video4linux/CARDLIST.tuner index 0e23946..30bbdda 100644 --- a/Documentation/video4linux/CARDLIST.tuner +++ b/Documentation/video4linux/CARDLIST.tuner @@ -74,3 +74,4 @@ tuner=72 - Thomson FE6600 tuner=73 - Samsung TCPG 6121P30A tuner=75 - Philips TEA5761 FM Radio tuner=76 - Xceive 5000 tuner +tuner=77 - TCL tuner MF02GIP-5N-E diff --git a/drivers/media/common/tuners/tuner-simple.c b/drivers/media/common/tuners/tuner-simple.c index aa773a6..fc3a6a9 100644 --- a/drivers/media/common/tuners/tuner-simple.c +++ b/drivers/media/common/tuners/tuner-simple.c @@ -142,6 +142,7 @@ static inline int tuner_stereo(const int type, const int status) case TUNER_PHILIPS_FM1236_MK3: case TUNER_PHILIPS_FM1256_IH3: case TUNER_LG_NTSC_TAPE: + case TUNER_TCL_MF02GIP_5N: return ((status & TUNER_SIGNAL) == TUNER_STEREO_MK3); default: return status & TUNER_STEREO; @@ -494,6 +495,7 @@ static int simple_radio_bandswitch(struct dvb_frontend *fe, u8 *buffer) case TUNER_PHILIPS_FMD1216ME_MK3: case TUNER_LG_NTSC_TAPE: case TUNER_PHILIPS_FM1256_IH3: + case TUNER_TCL_MF02GIP_5N: buffer[3] = 0x19; break; case TUNER_TNF_5335MF: diff --git a/drivers/media/common/tuners/tuner-types.c b/drivers/media/common/tuners/tuner-types.c index 10dddca..04961a1 100644 --- a/drivers/media/common/tuners/tuner-types.c +++ b/drivers/media/common/tuners/tuner-types.c @@ -1216,6 +1216,23 @@ static struct tuner_params tuner_samsung_tcpg_6121p30a_params[] = { }, }; +/* ------------ TUNER_TCL_MF02GIP-5N-E - TCL MF02GIP-5N ------------ */ + +static struct tuner_range tuner_tcl_mf02gip_5n_ntsc_ranges[] = { + { 16 * 172.00 /*MHz*/, 0x8e, 0x01, }, + { 16 * 448.00 /*MHz*/, 0x8e, 0x02, }, + { 16 * 999.99 , 0x8e, 0x04, }, +}; + +static struct tuner_params tuner_tcl_mf02gip_5n_params[] = { + { + .type = TUNER_PARAM_TYPE_NTSC, + .ranges = tuner_tcl_mf02gip_5n_ntsc_ranges, + .count = ARRAY_SIZE(tuner_tcl_mf02gip_5n_ntsc_ranges), + .cb_first_if_lower_freq = 1, + }, +}; + /* --------------------------------------------------------------------- */ struct tunertype tuners[] = { @@ -1641,6 +1658,11 @@ struct tunertype tuners[] = { .name = "Xceive 5000 tuner", /* see xc5000.c for details */ }, + [TUNER_TCL_MF02GIP_5N] = { /* TCL tuner MF02GIP-5N-E */ + .name = "TCL tuner MF02GIP-5N-E", + .params = tuner_tcl_mf02gip_5n_params, + .count = ARRAY_SIZE(tuner_tcl_mf02gip_5n_params), + }, }; EXPORT_SYMBOL(tuners); diff --git a/include/media/tuner.h b/include/media/tuner.h index 77068fc..ba81898 100644 --- a/include/media/tuner.h +++ b/include/media/tuner.h @@ -122,6 +122,7 @@ #define TUNER_TDA9887 74 /* This tuner should be used only internally */ #define TUNER_TEA5761 75 /* Only FM Radio Tuner */ #define TUNER_XC5000 76 /* Xceive Silicon Tuner */ +#define TUNER_TCL_MF02GIP_5N 77 /* TCL MF02GIP_5N */ /* tv card specific */ #define TDA9887_PRESENT (1<<0) -- cgit v0.10.2 From b46a9c8b7a8a77f28773816fd2afa1186743457d Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Tue, 5 Aug 2008 10:12:35 -0300 Subject: V4L/DVB (8627): Fix mute on bttv driver Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/bt8xx/bttv-driver.c b/drivers/media/video/bt8xx/bttv-driver.c index c3526d0..035a58d 100644 --- a/drivers/media/video/bt8xx/bttv-driver.c +++ b/drivers/media/video/bt8xx/bttv-driver.c @@ -3275,6 +3275,7 @@ static int bttv_open(struct inode *inode, struct file *file) sizeof(struct bttv_buffer), fh); set_tvnorm(btv,btv->tvnorm); + set_input(btv, btv->input, btv->tvnorm); btv->users++; @@ -3336,6 +3337,10 @@ static int bttv_release(struct inode *inode, struct file *file) btv->users--; bttv_field_count(btv); + + if (!btv->users) + audio_mute(btv, 1); + return 0; } -- cgit v0.10.2 From 08b1438cc2d50f559cc33ca4d9251636cec11647 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Wed, 6 Aug 2008 20:13:46 -0300 Subject: V4L/DVB (8628a): Remove duplicated include Removes duplicated #include Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/vino.c b/drivers/media/video/vino.c index 1edda45..7072cdf 100644 --- a/drivers/media/video/vino.c +++ b/drivers/media/video/vino.c @@ -39,7 +39,6 @@ #include #include -#include #include #include #include -- cgit v0.10.2 From 7d341a6a52f115512d60b2de89b2ebde54da8eff Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Tue, 5 Aug 2008 10:14:13 -0300 Subject: V4L/DVB (8628): bttv: Add support for Encore ENLTV2-FM Thanks to Sistema Fenix (http://www.sistemafenix.com.br/) and CDI Brasil (www.cdibrasil.com.br/) for sponsoring this development. Signed-off-by: Gilberto Signed-off-by: Mauro Carvalho Chehab diff --git a/Documentation/video4linux/CARDLIST.bttv b/Documentation/video4linux/CARDLIST.bttv index f32efb6..60ba668 100644 --- a/Documentation/video4linux/CARDLIST.bttv +++ b/Documentation/video4linux/CARDLIST.bttv @@ -150,3 +150,4 @@ 149 -> Typhoon TV-Tuner PCI (50684) 150 -> Geovision GV-600 [008a:763c] 151 -> Kozumi KTV-01C +152 -> Encore ENL TV-FM-2 [1000:1801] diff --git a/drivers/media/common/ir-keymaps.c b/drivers/media/common/ir-keymaps.c index 8fa91f8..aedfabd 100644 --- a/drivers/media/common/ir-keymaps.c +++ b/drivers/media/common/ir-keymaps.c @@ -1792,12 +1792,61 @@ IR_KEYTAB_TYPE ir_codes_encore_enltv[IR_KEYTAB_SIZE] = { [ 0x41 ] = KEY_GREEN, /* AP2 */ [ 0x47 ] = KEY_YELLOW, /* AP3 */ [ 0x57 ] = KEY_BLUE, /* AP4 */ - - }; - EXPORT_SYMBOL_GPL(ir_codes_encore_enltv); +/* Encore ENLTV2-FM - silver plastic - "Wand Media" written at the botton + Mauro Carvalho Chehab */ +IR_KEYTAB_TYPE ir_codes_encore_enltv2[IR_KEYTAB_SIZE] = { + [0x4c] = KEY_POWER2, + [0x4a] = KEY_TUNER, + [0x40] = KEY_1, + [0x60] = KEY_2, + [0x50] = KEY_3, + [0x70] = KEY_4, + [0x48] = KEY_5, + [0x68] = KEY_6, + [0x58] = KEY_7, + [0x78] = KEY_8, + [0x44] = KEY_9, + [0x54] = KEY_0, + + [0x64] = KEY_LAST, /* +100 */ + [0x4e] = KEY_AGAIN, /* Recall */ + + [0x6c] = KEY_SWITCHVIDEOMODE, /* Video Source */ + [0x5e] = KEY_MENU, + [0x56] = KEY_SCREEN, + [0x7a] = KEY_SETUP, + + [0x46] = KEY_MUTE, + [0x5c] = KEY_MODE, /* Stereo */ + [0x74] = KEY_INFO, + [0x7c] = KEY_CLEAR, + + [0x55] = KEY_UP, + [0x49] = KEY_DOWN, + [0x7e] = KEY_LEFT, + [0x59] = KEY_RIGHT, + [0x6a] = KEY_ENTER, + + [0x42] = KEY_VOLUMEUP, + [0x62] = KEY_VOLUMEDOWN, + [0x52] = KEY_CHANNELUP, + [0x72] = KEY_CHANNELDOWN, + + [0x41] = KEY_RECORD, + [0x51] = KEY_SHUFFLE, /* Snapshot */ + [0x75] = KEY_TIME, /* Timeshift */ + [0x71] = KEY_TV2, /* PIP */ + + [0x45] = KEY_REWIND, + [0x6f] = KEY_PAUSE, + [0x7d] = KEY_FORWARD, + [0x79] = KEY_STOP, +}; +EXPORT_SYMBOL_GPL(ir_codes_encore_enltv2); + /* for the Technotrend 1500 bundled remotes (grey and black): */ IR_KEYTAB_TYPE ir_codes_tt_1500[IR_KEYTAB_SIZE] = { [ 0x01 ] = KEY_POWER, diff --git a/drivers/media/video/bt8xx/bttv-cards.c b/drivers/media/video/bt8xx/bttv-cards.c index 6081edc..13742b0 100644 --- a/drivers/media/video/bt8xx/bttv-cards.c +++ b/drivers/media/video/bt8xx/bttv-cards.c @@ -305,7 +305,7 @@ static struct CARD { { 0x00261822, BTTV_BOARD_TWINHAN_DST, "DNTV Live! Mini "}, { 0xd200dbc0, BTTV_BOARD_DVICO_FUSIONHDTV_2, "DViCO FusionHDTV 2" }, { 0x763c008a, BTTV_BOARD_GEOVISION_GV600, "GeoVision GV-600" }, - + { 0x18011000, BTTV_BOARD_ENLTV_FM_2, "Encore ENL TV-FM-2" }, { 0, -1, NULL } }; @@ -3037,6 +3037,31 @@ struct tvcard bttv_tvcards[] = { .has_radio = 1, .has_remote = 1, }, + [BTTV_BOARD_ENLTV_FM_2] = { + /* Encore TV Tuner Pro ENL TV-FM-2 + Mauro Carvalho Chehab IR disabled + bit 18/17 = 00 -> mute + 01 -> enable external audio input + 10 -> internal audio input (mono?) + 11 -> internal audio input + */ + .gpiomask = 0x060040, + .muxsel = { 2, 3, 3 }, + .gpiomux = { 0x60000, 0x60000, 0x20000, 0x20000 }, + .gpiomute = 0, + .tuner_type = TUNER_TCL_MF02GIP_5N, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .pll = PLL_28, + .has_radio = 1, + .has_remote = 1, + } }; static const unsigned int bttv_num_tvcards = ARRAY_SIZE(bttv_tvcards); diff --git a/drivers/media/video/bt8xx/bttv-input.c b/drivers/media/video/bt8xx/bttv-input.c index a38af98..2f289d9 100644 --- a/drivers/media/video/bt8xx/bttv-input.c +++ b/drivers/media/video/bt8xx/bttv-input.c @@ -28,8 +28,8 @@ #include "bttvp.h" -static int debug; -module_param(debug, int, 0644); /* debug level (0,1,2) */ +static int ir_debug; +module_param(ir_debug, int, 0644); static int repeat_delay = 500; module_param(repeat_delay, int, 0644); static int repeat_period = 33; @@ -40,6 +40,12 @@ module_param(ir_rc5_remote_gap, int, 0644); static int ir_rc5_key_timeout = 200; module_param(ir_rc5_key_timeout, int, 0644); +#undef dprintk +#define dprintk(arg...) do { \ + if (ir_debug >= 1) \ + printk(arg); \ +} while (0) + #define DEVNAME "bttv-input" /* ---------------------------------------------------------------------- */ @@ -79,6 +85,45 @@ static void ir_handle_key(struct bttv *btv) } +static void ir_enltv_handle_key(struct bttv *btv) +{ + struct card_ir *ir = btv->remote; + u32 gpio, data, keyup; + + /* read gpio value */ + gpio = bttv_gpio_read(&btv->c); + + /* extract data */ + data = ir_extract_bits(gpio, ir->mask_keycode); + + /* Check if it is keyup */ + keyup = (gpio & ir->mask_keyup) ? 1 << 31 : 0; + + if ((ir->last_gpio & 0x7f) != data) { + dprintk(KERN_INFO DEVNAME ": gpio=0x%x code=%d | %s\n", + gpio, data, + (gpio & ir->mask_keyup) ? " up" : "up/down"); + + ir_input_keydown(ir->dev, &ir->ir, data, data); + if (keyup) + ir_input_nokey(ir->dev, &ir->ir); + } else { + if ((ir->last_gpio & 1 << 31) == keyup) + return; + + dprintk(KERN_INFO DEVNAME ":(cnt) gpio=0x%x code=%d | %s\n", + gpio, data, + (gpio & ir->mask_keyup) ? " up" : "down"); + + if (keyup) + ir_input_nokey(ir->dev, &ir->ir); + else + ir_input_keydown(ir->dev, &ir->ir, data, data); + } + + ir->last_gpio = data | keyup; +} + void bttv_input_irq(struct bttv *btv) { struct card_ir *ir = btv->remote; @@ -92,7 +137,10 @@ static void bttv_input_timer(unsigned long data) struct bttv *btv = (struct bttv*)data; struct card_ir *ir = btv->remote; - ir_handle_key(btv); + if (btv->c.type == BTTV_BOARD_ENLTV_FM_2) + ir_enltv_handle_key(btv); + else + ir_handle_key(btv); mod_timer(&ir->timer, jiffies + msecs_to_jiffies(ir->polling)); } @@ -284,6 +332,14 @@ int bttv_input_init(struct bttv *btv) ir->mask_keyup = 0x006000; ir->polling = 50; /* ms */ break; + case BTTV_BOARD_ENLTV_FM_2: + ir_codes = ir_codes_encore_enltv2; + ir->mask_keycode = 0x00fd00; + ir->mask_keyup = 0x000080; + ir->polling = 1; /* ms */ + ir->last_gpio = ir_extract_bits(bttv_gpio_read(&btv->c), + ir->mask_keycode); + break; } if (NULL == ir_codes) { dprintk(KERN_INFO "Ooops: IR config error [card=%d]\n", btv->c.type); diff --git a/drivers/media/video/bt8xx/bttv.h b/drivers/media/video/bt8xx/bttv.h index 6d93d16c..46cb90e 100644 --- a/drivers/media/video/bt8xx/bttv.h +++ b/drivers/media/video/bt8xx/bttv.h @@ -176,7 +176,7 @@ #define BTTV_BOARD_TYPHOON_TVTUNERPCI 0x95 #define BTTV_BOARD_GEOVISION_GV600 0x96 #define BTTV_BOARD_KOZUMI_KTV_01C 0x97 - +#define BTTV_BOARD_ENLTV_FM_2 0x98 /* more card-specific defines */ #define PT2254_L_CHANNEL 0x10 diff --git a/include/media/ir-common.h b/include/media/ir-common.h index f5566d4..6f8ef35 100644 --- a/include/media/ir-common.h +++ b/include/media/ir-common.h @@ -144,6 +144,7 @@ extern IR_KEYTAB_TYPE ir_codes_proteus_2309[IR_KEYTAB_SIZE]; extern IR_KEYTAB_TYPE ir_codes_budget_ci_old[IR_KEYTAB_SIZE]; extern IR_KEYTAB_TYPE ir_codes_asus_pc39[IR_KEYTAB_SIZE]; extern IR_KEYTAB_TYPE ir_codes_encore_enltv[IR_KEYTAB_SIZE]; +extern IR_KEYTAB_TYPE ir_codes_encore_enltv2[IR_KEYTAB_SIZE]; extern IR_KEYTAB_TYPE ir_codes_tt_1500[IR_KEYTAB_SIZE]; extern IR_KEYTAB_TYPE ir_codes_fusionhdtv_mce[IR_KEYTAB_SIZE]; extern IR_KEYTAB_TYPE ir_codes_behold[IR_KEYTAB_SIZE]; -- cgit v0.10.2 From a832781cd383e70929c0ceece23f8a5b62e2152b Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Fri, 25 Jul 2008 10:31:23 -0300 Subject: V4L/DVB (8630): First mxb cleanup phase Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/mxb.c b/drivers/media/video/mxb.c index 8ef578c..7c9820c 100644 --- a/drivers/media/video/mxb.c +++ b/drivers/media/video/mxb.c @@ -466,15 +466,15 @@ static int mxb_attach(struct saa7146_dev* dev, struct saa7146_pci_extension_data /* checking for i2c-devices can be omitted here, because we already did this in "mxb_vl42_probe" */ - saa7146_vv_init(dev,&vv_data); - if( 0 != saa7146_register_device(&mxb->video_dev, dev, "mxb", VFL_TYPE_GRABBER)) { + saa7146_vv_init(dev, &vv_data); + if (saa7146_register_device(&mxb->video_dev, dev, "mxb", VFL_TYPE_GRABBER)) { ERR(("cannot register capture v4l2 device. skipping.\n")); return -1; } /* initialization stuff (vbi) (only for revision > 0 and for extensions which want it)*/ - if( 0 != MXB_BOARD_CAN_DO_VBI(dev)) { - if( 0 != saa7146_register_device(&mxb->vbi_dev, dev, "mxb", VFL_TYPE_VBI)) { + if (MXB_BOARD_CAN_DO_VBI(dev)) { + if (saa7146_register_device(&mxb->vbi_dev, dev, "mxb", VFL_TYPE_VBI)) { ERR(("cannot register vbi v4l2 device. skipping.\n")); } } @@ -486,7 +486,7 @@ static int mxb_attach(struct saa7146_dev* dev, struct saa7146_pci_extension_data i2c_use_client(mxb->saa7111a); i2c_use_client(mxb->tuner); - printk("mxb: found 'Multimedia eXtension Board'-%d.\n",mxb_num); + printk("mxb: found Multimedia eXtension Board #%d.\n", mxb_num); mxb_num++; mxb_init_done(dev); @@ -737,8 +737,8 @@ static int mxb_ioctl(struct saa7146_fh *fh, unsigned int cmd, void *arg) DEB_EE(("VIDIOC_G_TUNER: %d\n", t->index)); memset(t,0,sizeof(*t)); - strcpy(t->name, "Television"); + strlcpy(t->name, "Television", sizeof(t->name)); t->type = V4L2_TUNER_ANALOG_TV; t->capability = V4L2_TUNER_CAP_NORM | V4L2_TUNER_CAP_STEREO | V4L2_TUNER_CAP_LANG1 | V4L2_TUNER_CAP_LANG2 | V4L2_TUNER_CAP_SAP; t->rangelow = 772; /* 48.25 MHZ / 62.5 kHz = 772, see fi1216mk2-specs, page 2 */ @@ -746,7 +746,6 @@ static int mxb_ioctl(struct saa7146_fh *fh, unsigned int cmd, void *arg) /* FIXME: add the real signal strength here */ t->signal = 0xffff; t->afc = 0; - mxb->tda9840->driver->command(mxb->tda9840,TDA9840_DETECT, &byte); t->audmode = mxb->cur_mode; diff --git a/drivers/media/video/tda9840.c b/drivers/media/video/tda9840.c index 2437c1a..57deeb8 100644 --- a/drivers/media/video/tda9840.c +++ b/drivers/media/video/tda9840.c @@ -2,6 +2,7 @@ tda9840 - i2c-driver for the tda9840 by SGS Thomson Copyright (C) 1998-2003 Michael Hunold + Copyright (C) 2008 Hans Verkuil The tda9840 is a stereo/dual sound processor with digital identification. It can be found at address 0x84 on the i2c-bus. @@ -28,15 +29,18 @@ #include #include #include - +#include +#include #include "tda9840.h" -static int debug; /* insmod parameter */ +MODULE_AUTHOR("Michael Hunold "); +MODULE_DESCRIPTION("tda9840 driver"); +MODULE_LICENSE("GPL"); + +static int debug; module_param(debug, int, 0644); -MODULE_PARM_DESC(debug, "Turn on/off device debugging (default:off)."); -#define dprintk(args...) \ - do { if (debug) { printk("%s: %s()[%d]: ", KBUILD_MODNAME, __func__, __LINE__); printk(args); } } while (0) +MODULE_PARM_DESC(debug, "Debug level (0-1)"); #define SWITCH 0x00 #define LEVEL_ADJUST 0x02 @@ -49,18 +53,21 @@ static unsigned short normal_i2c[] = { I2C_ADDR_TDA9840, I2C_CLIENT_END }; /* magic definition of all other variables and things */ I2C_CLIENT_INSMOD; -static struct i2c_driver driver; -static struct i2c_client client_template; +static void tda9840_write(struct i2c_client *client, u8 reg, u8 val) +{ + if (i2c_smbus_write_byte_data(client, reg, val)) + v4l_dbg(1, debug, client, "error writing %02x to %02x\n", + val, reg); +} -static int command(struct i2c_client *client, unsigned int cmd, void *arg) +static int tda9840_command(struct i2c_client *client, unsigned cmd, void *arg) { int result; int byte = *(int *)arg; switch (cmd) { case TDA9840_SWITCH: - - dprintk("TDA9840_SWITCH: 0x%02x\n", byte); + v4l_dbg(1, debug, client, "TDA9840_SWITCH: 0x%02x\n", byte); if (byte != TDA9840_SET_MONO && byte != TDA9840_SET_MUTE @@ -73,14 +80,11 @@ static int command(struct i2c_client *client, unsigned int cmd, void *arg) return -EINVAL; } - result = i2c_smbus_write_byte_data(client, SWITCH, byte); - if (result) - dprintk("i2c_smbus_write_byte() failed, ret:%d\n", result); + tda9840_write(client, SWITCH, byte); break; case TDA9840_LEVEL_ADJUST: - - dprintk("TDA9840_LEVEL_ADJUST: %d\n", byte); + v4l_dbg(1, debug, client, "TDA9840_LEVEL_ADJUST: %d\n", byte); /* check for correct range */ if (byte > 25 || byte < -20) @@ -92,15 +96,11 @@ static int command(struct i2c_client *client, unsigned int cmd, void *arg) byte += 0x8; else byte = -byte; - - result = i2c_smbus_write_byte_data(client, LEVEL_ADJUST, byte); - if (result) - dprintk("i2c_smbus_write_byte() failed, ret:%d\n", result); + tda9840_write(client, LEVEL_ADJUST, byte); break; case TDA9840_STEREO_ADJUST: - - dprintk("TDA9840_STEREO_ADJUST: %d\n", byte); + v4l_dbg(1, debug, client, "TDA9840_STEREO_ADJUST: %d\n", byte); /* check for correct range */ if (byte > 25 || byte < -24) @@ -113,9 +113,7 @@ static int command(struct i2c_client *client, unsigned int cmd, void *arg) else byte = -byte; - result = i2c_smbus_write_byte_data(client, STEREO_ADJUST, byte); - if (result) - dprintk("i2c_smbus_write_byte() failed, ret:%d\n", result); + tda9840_write(client, STEREO_ADJUST, byte); break; case TDA9840_DETECT: { @@ -123,29 +121,29 @@ static int command(struct i2c_client *client, unsigned int cmd, void *arg) byte = i2c_smbus_read_byte_data(client, STEREO_ADJUST); if (byte == -1) { - dprintk("i2c_smbus_read_byte_data() failed\n"); + v4l_dbg(1, debug, client, + "i2c_smbus_read_byte_data() failed\n"); return -EIO; } - if (0 != (byte & 0x80)) { - dprintk("TDA9840_DETECT: register contents invalid\n"); + if (byte & 0x80) { + v4l_dbg(1, debug, client, + "TDA9840_DETECT: register contents invalid\n"); return -EINVAL; } - dprintk("TDA9840_DETECT: byte: 0x%02x\n", byte); - *ret = ((byte & 0x60) >> 5); + v4l_dbg(1, debug, client, "TDA9840_DETECT: byte: 0x%02x\n", byte); + *ret = (byte & 0x60) >> 5; result = 0; break; } case TDA9840_TEST: - dprintk("TDA9840_TEST: 0x%02x\n", byte); + v4l_dbg(1, debug, client, "TDA9840_TEST: 0x%02x\n", byte); /* mask out irrelevant bits */ byte &= 0x3; - result = i2c_smbus_write_byte_data(client, TEST, byte); - if (result) - dprintk("i2c_smbus_write_byte() failed, ret:%d\n", result); + tda9840_write(client, TEST, byte); break; default: return -ENOIOCTLCMD; @@ -157,99 +155,51 @@ static int command(struct i2c_client *client, unsigned int cmd, void *arg) return 0; } -static int detect(struct i2c_adapter *adapter, int address, int kind) +static int tda9840_probe(struct i2c_client *client, + const struct i2c_device_id *id) { - struct i2c_client *client; - int result = 0; - - int byte = 0x0; + int result; + int byte; /* let's see whether this adapter can support what we need */ - if (0 == i2c_check_functionality(adapter, - I2C_FUNC_SMBUS_READ_BYTE_DATA | - I2C_FUNC_SMBUS_WRITE_BYTE_DATA)) { + if (!i2c_check_functionality(client->adapter, + I2C_FUNC_SMBUS_READ_BYTE_DATA | + I2C_FUNC_SMBUS_WRITE_BYTE_DATA)) return 0; - } - /* allocate memory for client structure */ - client = kmalloc(sizeof(struct i2c_client), GFP_KERNEL); - if (!client) { - printk("not enough kernel memory\n"); - return -ENOMEM; - } - - /* fill client structure */ - memcpy(client, &client_template, sizeof(struct i2c_client)); - client->addr = address; - client->adapter = adapter; - - /* tell the i2c layer a new client has arrived */ - if (0 != (result = i2c_attach_client(client))) { - kfree(client); - return result; - } + v4l_info(client, "chip found @ 0x%x (%s)\n", + client->addr << 1, client->adapter->name); /* set initial values for level & stereo - adjustment, mode */ byte = 0; - result = command(client, TDA9840_LEVEL_ADJUST, &byte); - result += command(client, TDA9840_STEREO_ADJUST, &byte); + result = tda9840_command(client, TDA9840_LEVEL_ADJUST, &byte); + result += tda9840_command(client, TDA9840_STEREO_ADJUST, &byte); byte = TDA9840_SET_MONO; - result = command(client, TDA9840_SWITCH, &byte); + result = tda9840_command(client, TDA9840_SWITCH, &byte); if (result) { - dprintk("could not initialize tda9840\n"); + v4l_dbg(1, debug, client, "could not initialize tda9840\n"); return -ENODEV; } - - printk("tda9840: detected @ 0x%02x on adapter %s\n", address, &client->adapter->name[0]); return 0; } -static int attach(struct i2c_adapter *adapter) +static int tda9840_legacy_probe(struct i2c_adapter *adapter) { - /* let's see whether this is a know adapter we can attach to */ - if (adapter->id != I2C_HW_SAA7146) { - dprintk("refusing to probe on unknown adapter [name='%s',id=0x%x]\n", adapter->name, adapter->id); - return -ENODEV; - } - - return i2c_probe(adapter, &addr_data, &detect); + /* Let's see whether this is a known adapter we can attach to. + Prevents conflicts with tvaudio.c. */ + return adapter->id == I2C_HW_SAA7146; } - -static int detach(struct i2c_client *client) -{ - int ret = i2c_detach_client(client); - kfree(client); - return ret; -} - -static struct i2c_driver driver = { - .driver = { - .name = "tda9840", - }, - .id = I2C_DRIVERID_TDA9840, - .attach_adapter = attach, - .detach_client = detach, - .command = command, +static const struct i2c_device_id tda9840_id[] = { + { "tda9840", 0 }, + { } }; +MODULE_DEVICE_TABLE(i2c, tda9840_id); -static struct i2c_client client_template = { +static struct v4l2_i2c_driver_data v4l2_i2c_data = { .name = "tda9840", - .driver = &driver, + .driverid = I2C_DRIVERID_TDA9840, + .command = tda9840_command, + .probe = tda9840_probe, + .legacy_probe = tda9840_legacy_probe, + .id_table = tda9840_id, }; - -static int __init this_module_init(void) -{ - return i2c_add_driver(&driver); -} - -static void __exit this_module_exit(void) -{ - i2c_del_driver(&driver); -} - -module_init(this_module_init); -module_exit(this_module_exit); - -MODULE_AUTHOR("Michael Hunold "); -MODULE_DESCRIPTION("tda9840 driver"); -MODULE_LICENSE("GPL"); diff --git a/drivers/media/video/tea6415c.c b/drivers/media/video/tea6415c.c index 421c144..cde092a 100644 --- a/drivers/media/video/tea6415c.c +++ b/drivers/media/video/tea6415c.c @@ -2,6 +2,7 @@ tea6415c - i2c-driver for the tea6415c by SGS Thomson Copyright (C) 1998-2003 Michael Hunold + Copyright (C) 2008 Hans Verkuil The tea6415c is a bus controlled video-matrix-switch with 8 inputs and 6 outputs. @@ -30,18 +31,18 @@ #include #include #include - +#include +#include #include "tea6415c.h" -static int debug; /* insmod parameter */ -module_param(debug, int, 0644); -MODULE_PARM_DESC(debug, "Turn on/off device debugging (default:off)."); +MODULE_AUTHOR("Michael Hunold "); +MODULE_DESCRIPTION("tea6415c driver"); +MODULE_LICENSE("GPL"); -#define dprintk(args...) \ - do { if (debug) { printk("%s: %s()[%d]: ", KBUILD_MODNAME, __func__, __LINE__); printk(args); } } while (0) +static int debug; +module_param(debug, int, 0644); -#define TEA6415C_NUM_INPUTS 8 -#define TEA6415C_NUM_OUTPUTS 6 +MODULE_PARM_DESC(debug, "Debug level (0-1)"); /* addresses to scan, found only at 0x03 and/or 0x43 (7-bit) */ static unsigned short normal_i2c[] = { I2C_TEA6415C_1, I2C_TEA6415C_2, I2C_CLIENT_END }; @@ -49,60 +50,6 @@ static unsigned short normal_i2c[] = { I2C_TEA6415C_1, I2C_TEA6415C_2, I2C_CLIEN /* magic definition of all other variables and things */ I2C_CLIENT_INSMOD; -static struct i2c_driver driver; -static struct i2c_client client_template; - -/* this function is called by i2c_probe */ -static int detect(struct i2c_adapter *adapter, int address, int kind) -{ - struct i2c_client *client = NULL; - int err = 0; - - /* let's see whether this adapter can support what we need */ - if (0 == i2c_check_functionality(adapter, I2C_FUNC_SMBUS_WRITE_BYTE)) { - return 0; - } - - /* allocate memory for client structure */ - client = kmalloc(sizeof(struct i2c_client), GFP_KERNEL); - if (!client) { - return -ENOMEM; - } - - /* fill client structure */ - memcpy(client, &client_template, sizeof(struct i2c_client)); - client->addr = address; - client->adapter = adapter; - - /* tell the i2c layer a new client has arrived */ - if (0 != (err = i2c_attach_client(client))) { - kfree(client); - return err; - } - - printk("tea6415c: detected @ 0x%02x on adapter %s\n", address, &client->adapter->name[0]); - - return 0; -} - -static int attach(struct i2c_adapter *adapter) -{ - /* let's see whether this is a know adapter we can attach to */ - if (adapter->id != I2C_HW_SAA7146) { - dprintk("refusing to probe on unknown adapter [name='%s',id=0x%x]\n", adapter->name, adapter->id); - return -ENODEV; - } - - return i2c_probe(adapter, &addr_data, &detect); -} - -static int detach(struct i2c_client *client) -{ - int ret = i2c_detach_client(client); - kfree(client); - return ret; -} - /* makes a connection between the input-pin 'i' and the output-pin 'o' for the tea6415c-client 'client' */ static int switch_matrix(struct i2c_client *client, int i, int o) @@ -110,7 +57,7 @@ static int switch_matrix(struct i2c_client *client, int i, int o) u8 byte = 0; int ret; - dprintk("adr:0x%02x, i:%d, o:%d\n", client->addr, i, o); + v4l_dbg(1, debug, client, "i=%d, o=%d\n", i, o); /* check if the pins are valid */ if (0 == ((1 == i || 3 == i || 5 == i || 6 == i || 8 == i || 10 == i || 20 == i || 11 == i) @@ -168,14 +115,14 @@ static int switch_matrix(struct i2c_client *client, int i, int o) ret = i2c_smbus_write_byte(client, byte); if (ret) { - dprintk("i2c_smbus_write_byte() failed, ret:%d\n", ret); + v4l_dbg(1, debug, client, + "i2c_smbus_write_byte() failed, ret:%d\n", ret); return -EIO; } - return ret; } -static int command(struct i2c_client *client, unsigned int cmd, void *arg) +static int tea6415c_command(struct i2c_client *client, unsigned cmd, void *arg) { struct tea6415c_multiplex *v = (struct tea6415c_multiplex *)arg; int result = 0; @@ -187,38 +134,40 @@ static int command(struct i2c_client *client, unsigned int cmd, void *arg) default: return -ENOIOCTLCMD; } - return result; } -static struct i2c_driver driver = { - .driver = { - .name = "tea6415c", - }, - .id = I2C_DRIVERID_TEA6415C, - .attach_adapter = attach, - .detach_client = detach, - .command = command, -}; - -static struct i2c_client client_template = { - .name = "tea6415c", - .driver = &driver, -}; - -static int __init this_module_init(void) +/* this function is called by i2c_probe */ +static int tea6415c_probe(struct i2c_client *client, + const struct i2c_device_id *id) { - return i2c_add_driver(&driver); + /* let's see whether this adapter can support what we need */ + if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_WRITE_BYTE)) + return 0; + + v4l_info(client, "chip found @ 0x%x (%s)\n", + client->addr << 1, client->adapter->name); + return 0; } -static void __exit this_module_exit(void) +static int tea6415c_legacy_probe(struct i2c_adapter *adapter) { - i2c_del_driver(&driver); + /* Let's see whether this is a known adapter we can attach to. + Prevents conflicts with tvaudio.c. */ + return adapter->id == I2C_HW_SAA7146; } -module_init(this_module_init); -module_exit(this_module_exit); +static const struct i2c_device_id tea6415c_id[] = { + { "tea6415c", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, tea6415c_id); -MODULE_AUTHOR("Michael Hunold "); -MODULE_DESCRIPTION("tea6415c driver"); -MODULE_LICENSE("GPL"); +static struct v4l2_i2c_driver_data v4l2_i2c_data = { + .name = "tea6415c", + .driverid = I2C_DRIVERID_TEA6415C, + .command = tea6415c_command, + .probe = tea6415c_probe, + .legacy_probe = tea6415c_legacy_probe, + .id_table = tea6415c_id, +}; diff --git a/drivers/media/video/tea6420.c b/drivers/media/video/tea6420.c index b5c8957..e508209 100644 --- a/drivers/media/video/tea6420.c +++ b/drivers/media/video/tea6420.c @@ -2,6 +2,7 @@ tea6420 - i2c-driver for the tea6420 by SGS Thomson Copyright (C) 1998-2003 Michael Hunold + Copyright (C) 2008 Hans Verkuil The tea6420 is a bus controlled audio-matrix with 5 stereo inputs, 4 stereo outputs and gain control for each output. @@ -30,15 +31,18 @@ #include #include #include - +#include +#include #include "tea6420.h" -static int debug; /* insmod parameter */ +MODULE_AUTHOR("Michael Hunold "); +MODULE_DESCRIPTION("tea6420 driver"); +MODULE_LICENSE("GPL"); + +static int debug; module_param(debug, int, 0644); -MODULE_PARM_DESC(debug, "Turn on/off device debugging (default:off)."); -#define dprintk(args...) \ - do { if (debug) { printk("%s: %s()[%d]: ", KBUILD_MODNAME, __func__, __LINE__); printk(args); } } while (0) +MODULE_PARM_DESC(debug, "Debug level (0-1)"); /* addresses to scan, found only at 0x4c and/or 0x4d (7-Bit) */ static unsigned short normal_i2c[] = { I2C_ADDR_TEA6420_1, I2C_ADDR_TEA6420_2, I2C_CLIENT_END }; @@ -46,23 +50,20 @@ static unsigned short normal_i2c[] = { I2C_ADDR_TEA6420_1, I2C_ADDR_TEA6420_2, I /* magic definition of all other variables and things */ I2C_CLIENT_INSMOD; -static struct i2c_driver driver; -static struct i2c_client client_template; - /* make a connection between the input 'i' and the output 'o' with gain 'g' for the tea6420-client 'client' (note: i = 6 means 'mute') */ static int tea6420_switch(struct i2c_client *client, int i, int o, int g) { - u8 byte = 0; + u8 byte; int ret; - dprintk("adr:0x%02x, i:%d, o:%d, g:%d\n", client->addr, i, o, g); + v4l_dbg(1, debug, client, "i=%d, o=%d, g=%d\n", i, o, g); /* check if the parameters are valid */ if (i < 1 || i > 6 || o < 1 || o > 4 || g < 0 || g > 6 || g % 2 != 0) return -1; - byte = ((o - 1) << 5); + byte = ((o - 1) << 5); byte |= (i - 1); /* to understand this, have a look at the tea6420-specs (p.5) */ @@ -82,40 +83,41 @@ static int tea6420_switch(struct i2c_client *client, int i, int o, int g) ret = i2c_smbus_write_byte(client, byte); if (ret) { - dprintk("i2c_smbus_write_byte() failed, ret:%d\n", ret); + v4l_dbg(1, debug, client, + "i2c_smbus_write_byte() failed, ret:%d\n", ret); return -EIO; } - return 0; } -/* this function is called by i2c_probe */ -static int tea6420_detect(struct i2c_adapter *adapter, int address, int kind) +static int tea6420_command(struct i2c_client *client, unsigned cmd, void *arg) { - struct i2c_client *client; - int err = 0, i = 0; + struct tea6420_multiplex *a = (struct tea6420_multiplex *)arg; + int result = 0; - /* let's see whether this adapter can support what we need */ - if (0 == i2c_check_functionality(adapter, I2C_FUNC_SMBUS_WRITE_BYTE)) { - return 0; + switch (cmd) { + case TEA6420_SWITCH: + result = tea6420_switch(client, a->in, a->out, a->gain); + break; + default: + return -ENOIOCTLCMD; } - /* allocate memory for client structure */ - client = kzalloc(sizeof(struct i2c_client), GFP_KERNEL); - if (!client) { - return -ENOMEM; - } + return result; +} - /* fill client structure */ - memcpy(client, &client_template, sizeof(struct i2c_client)); - client->addr = address; - client->adapter = adapter; +/* this function is called by i2c_probe */ +static int tea6420_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + int err, i; - /* tell the i2c layer a new client has arrived */ - if (0 != (err = i2c_attach_client(client))) { - kfree(client); - return err; - } + /* let's see whether this adapter can support what we need */ + if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_WRITE_BYTE)) + return -EIO; + + v4l_info(client, "chip found @ 0x%x (%s)\n", + client->addr << 1, client->adapter->name); /* set initial values: set "mute"-input to all outputs at gain 0 */ err = 0; @@ -123,78 +125,31 @@ static int tea6420_detect(struct i2c_adapter *adapter, int address, int kind) err += tea6420_switch(client, 6, i, 0); } if (err) { - dprintk("could not initialize tea6420\n"); + v4l_dbg(1, debug, client, "could not initialize tea6420\n"); kfree(client); return -ENODEV; } - - printk("tea6420: detected @ 0x%02x on adapter %s\n", address, &client->adapter->name[0]); - return 0; } -static int attach(struct i2c_adapter *adapter) +static int tea6420_legacy_probe(struct i2c_adapter *adapter) { - /* let's see whether this is a know adapter we can attach to */ - if (adapter->id != I2C_HW_SAA7146) { - dprintk("refusing to probe on unknown adapter [name='%s',id=0x%x]\n", adapter->name, adapter->id); - return -ENODEV; - } - - return i2c_probe(adapter, &addr_data, &tea6420_detect); -} - -static int detach(struct i2c_client *client) -{ - int ret = i2c_detach_client(client); - kfree(client); - return ret; -} - -static int command(struct i2c_client *client, unsigned int cmd, void *arg) -{ - struct tea6420_multiplex *a = (struct tea6420_multiplex *)arg; - int result = 0; - - switch (cmd) { - case TEA6420_SWITCH: - result = tea6420_switch(client, a->in, a->out, a->gain); - break; - default: - return -ENOIOCTLCMD; - } - - return result; + /* Let's see whether this is a known adapter we can attach to. + Prevents conflicts with tvaudio.c. */ + return adapter->id == I2C_HW_SAA7146; } -static struct i2c_driver driver = { - .driver = { - .name = "tea6420", - }, - .id = I2C_DRIVERID_TEA6420, - .attach_adapter = attach, - .detach_client = detach, - .command = command, +static const struct i2c_device_id tea6420_id[] = { + { "tea6420", 0 }, + { } }; +MODULE_DEVICE_TABLE(i2c, tea6420_id); -static struct i2c_client client_template = { +static struct v4l2_i2c_driver_data v4l2_i2c_data = { .name = "tea6420", - .driver = &driver, + .driverid = I2C_DRIVERID_TEA6420, + .command = tea6420_command, + .probe = tea6420_probe, + .legacy_probe = tea6420_legacy_probe, + .id_table = tea6420_id, }; - -static int __init this_module_init(void) -{ - return i2c_add_driver(&driver); -} - -static void __exit this_module_exit(void) -{ - i2c_del_driver(&driver); -} - -module_init(this_module_init); -module_exit(this_module_exit); - -MODULE_AUTHOR("Michael Hunold "); -MODULE_DESCRIPTION("tea6420 driver"); -MODULE_LICENSE("GPL"); -- cgit v0.10.2 From 188919ac57810e39138749338d5a33ba1e970e23 Mon Sep 17 00:00:00 2001 From: Janne Grunau Date: Fri, 8 Aug 2008 07:21:00 -0300 Subject: V4L/DVB (8634): v4l2: extend MPEG Encoding API with AVC and AAC Adds Advanced Audio Coding (AAC) and MPEG-4 Advanced Video Coding (AVC/H.264) as audio/video codecs to the extended controls API. Updates cx2341x driver to the new values. Signed-off-by: Janne Grunau Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/cx2341x.c b/drivers/media/video/cx2341x.c index 22847a0..cbbe47f 100644 --- a/drivers/media/video/cx2341x.c +++ b/drivers/media/video/cx2341x.c @@ -508,7 +508,10 @@ int cx2341x_ctrl_query(const struct cx2341x_mpeg_params *params, /* this setting is read-only for the cx2341x since the V4L2_CID_MPEG_STREAM_TYPE really determines the MPEG-1/2 setting */ - err = v4l2_ctrl_query_fill_std(qctrl); + err = v4l2_ctrl_query_fill(qctrl, + V4L2_MPEG_VIDEO_ENCODING_MPEG_1, + V4L2_MPEG_VIDEO_ENCODING_MPEG_2, 1, + V4L2_MPEG_VIDEO_ENCODING_MPEG_2); if (err == 0) qctrl->flags |= V4L2_CTRL_FLAG_READ_ONLY; return err; diff --git a/drivers/media/video/v4l2-common.c b/drivers/media/video/v4l2-common.c index 88ca131..893ac49 100644 --- a/drivers/media/video/v4l2-common.c +++ b/drivers/media/video/v4l2-common.c @@ -187,9 +187,10 @@ const char **v4l2_ctrl_get_menu(u32 id) NULL }; static const char *mpeg_audio_encoding[] = { - "Layer I", - "Layer II", - "Layer III", + "MPEG-1 Layer I", + "MPEG-1 Layer II", + "MPEG-1 Layer III", + "MPEG-4 AAC", NULL }; static const char *mpeg_audio_l1_bitrate[] = { @@ -271,6 +272,7 @@ const char **v4l2_ctrl_get_menu(u32 id) static const char *mpeg_video_encoding[] = { "MPEG-1", "MPEG-2", + "MPEG-4 AVC", NULL }; static const char *mpeg_video_aspect[] = { @@ -358,7 +360,7 @@ int v4l2_ctrl_query_fill(struct v4l2_queryctrl *qctrl, s32 min, s32 max, s32 ste /* MPEG controls */ case V4L2_CID_MPEG_CLASS: name = "MPEG Encoder Controls"; break; case V4L2_CID_MPEG_AUDIO_SAMPLING_FREQ: name = "Audio Sampling Frequency"; break; - case V4L2_CID_MPEG_AUDIO_ENCODING: name = "Audio Encoding Layer"; break; + case V4L2_CID_MPEG_AUDIO_ENCODING: name = "Audio Encoding"; break; case V4L2_CID_MPEG_AUDIO_L1_BITRATE: name = "Audio Layer I Bitrate"; break; case V4L2_CID_MPEG_AUDIO_L2_BITRATE: name = "Audio Layer II Bitrate"; break; case V4L2_CID_MPEG_AUDIO_L3_BITRATE: name = "Audio Layer III Bitrate"; break; @@ -493,7 +495,7 @@ int v4l2_ctrl_query_fill_std(struct v4l2_queryctrl *qctrl) case V4L2_CID_MPEG_AUDIO_ENCODING: return v4l2_ctrl_query_fill(qctrl, V4L2_MPEG_AUDIO_ENCODING_LAYER_1, - V4L2_MPEG_AUDIO_ENCODING_LAYER_3, 1, + V4L2_MPEG_AUDIO_ENCODING_AAC, 1, V4L2_MPEG_AUDIO_ENCODING_LAYER_2); case V4L2_CID_MPEG_AUDIO_L1_BITRATE: return v4l2_ctrl_query_fill(qctrl, @@ -535,7 +537,7 @@ int v4l2_ctrl_query_fill_std(struct v4l2_queryctrl *qctrl) case V4L2_CID_MPEG_VIDEO_ENCODING: return v4l2_ctrl_query_fill(qctrl, V4L2_MPEG_VIDEO_ENCODING_MPEG_1, - V4L2_MPEG_VIDEO_ENCODING_MPEG_2, 1, + V4L2_MPEG_VIDEO_ENCODING_MPEG_4_AVC, 1, V4L2_MPEG_VIDEO_ENCODING_MPEG_2); case V4L2_CID_MPEG_VIDEO_ASPECT: return v4l2_ctrl_query_fill(qctrl, diff --git a/include/linux/videodev2.h b/include/linux/videodev2.h index 303d93f..350aba2 100644 --- a/include/linux/videodev2.h +++ b/include/linux/videodev2.h @@ -910,6 +910,7 @@ enum v4l2_mpeg_audio_encoding { V4L2_MPEG_AUDIO_ENCODING_LAYER_1 = 0, V4L2_MPEG_AUDIO_ENCODING_LAYER_2 = 1, V4L2_MPEG_AUDIO_ENCODING_LAYER_3 = 2, + V4L2_MPEG_AUDIO_ENCODING_AAC = 3, }; #define V4L2_CID_MPEG_AUDIO_L1_BITRATE (V4L2_CID_MPEG_BASE+102) enum v4l2_mpeg_audio_l1_bitrate { @@ -992,8 +993,9 @@ enum v4l2_mpeg_audio_crc { /* MPEG video */ #define V4L2_CID_MPEG_VIDEO_ENCODING (V4L2_CID_MPEG_BASE+200) enum v4l2_mpeg_video_encoding { - V4L2_MPEG_VIDEO_ENCODING_MPEG_1 = 0, - V4L2_MPEG_VIDEO_ENCODING_MPEG_2 = 1, + V4L2_MPEG_VIDEO_ENCODING_MPEG_1 = 0, + V4L2_MPEG_VIDEO_ENCODING_MPEG_2 = 1, + V4L2_MPEG_VIDEO_ENCODING_MPEG_4_AVC = 2, }; #define V4L2_CID_MPEG_VIDEO_ASPECT (V4L2_CID_MPEG_BASE+201) enum v4l2_mpeg_video_aspect { -- cgit v0.10.2 From e6b5da88fb24c5c1e52707faea7c46df09da42f0 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Fri, 8 Aug 2008 07:38:07 -0300 Subject: V4L/DVB (8635): v4l: add AC-3 audio support to the MPEG Encoding API Some models of the saa6752hs support AC-3. Extend the API with the necessary controls for AC-3. Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/v4l2-common.c b/drivers/media/video/v4l2-common.c index 893ac49..0a96cc3 100644 --- a/drivers/media/video/v4l2-common.c +++ b/drivers/media/video/v4l2-common.c @@ -187,10 +187,11 @@ const char **v4l2_ctrl_get_menu(u32 id) NULL }; static const char *mpeg_audio_encoding[] = { - "MPEG-1 Layer I", - "MPEG-1 Layer II", - "MPEG-1 Layer III", - "MPEG-4 AAC", + "MPEG-1/2 Layer I", + "MPEG-1/2 Layer II", + "MPEG-1/2 Layer III", + "MPEG-2/4 AAC", + "AC-3", NULL }; static const char *mpeg_audio_l1_bitrate[] = { @@ -244,6 +245,28 @@ const char **v4l2_ctrl_get_menu(u32 id) "320 kbps", NULL }; + static const char *mpeg_audio_ac3_bitrate[] = { + "32 kbps", + "40 kbps", + "48 kbps", + "56 kbps", + "64 kbps", + "80 kbps", + "96 kbps", + "112 kbps", + "128 kbps", + "160 kbps", + "192 kbps", + "224 kbps", + "256 kbps", + "320 kbps", + "384 kbps", + "448 kbps", + "512 kbps", + "576 kbps", + "640 kbps", + NULL + }; static const char *mpeg_audio_mode[] = { "Stereo", "Joint Stereo", @@ -313,6 +336,8 @@ const char **v4l2_ctrl_get_menu(u32 id) return mpeg_audio_l2_bitrate; case V4L2_CID_MPEG_AUDIO_L3_BITRATE: return mpeg_audio_l3_bitrate; + case V4L2_CID_MPEG_AUDIO_AC3_BITRATE: + return mpeg_audio_ac3_bitrate; case V4L2_CID_MPEG_AUDIO_MODE: return mpeg_audio_mode; case V4L2_CID_MPEG_AUDIO_MODE_EXTENSION: @@ -364,6 +389,7 @@ int v4l2_ctrl_query_fill(struct v4l2_queryctrl *qctrl, s32 min, s32 max, s32 ste case V4L2_CID_MPEG_AUDIO_L1_BITRATE: name = "Audio Layer I Bitrate"; break; case V4L2_CID_MPEG_AUDIO_L2_BITRATE: name = "Audio Layer II Bitrate"; break; case V4L2_CID_MPEG_AUDIO_L3_BITRATE: name = "Audio Layer III Bitrate"; break; + case V4L2_CID_MPEG_AUDIO_AC3_BITRATE: name = "Audio AC-3 Bitrate"; break; case V4L2_CID_MPEG_AUDIO_MODE: name = "Audio Stereo Mode"; break; case V4L2_CID_MPEG_AUDIO_MODE_EXTENSION: name = "Audio Stereo Mode Extension"; break; case V4L2_CID_MPEG_AUDIO_EMPHASIS: name = "Audio Emphasis"; break; @@ -409,6 +435,7 @@ int v4l2_ctrl_query_fill(struct v4l2_queryctrl *qctrl, s32 min, s32 max, s32 ste case V4L2_CID_MPEG_AUDIO_L1_BITRATE: case V4L2_CID_MPEG_AUDIO_L2_BITRATE: case V4L2_CID_MPEG_AUDIO_L3_BITRATE: + case V4L2_CID_MPEG_AUDIO_AC3_BITRATE: case V4L2_CID_MPEG_AUDIO_MODE: case V4L2_CID_MPEG_AUDIO_MODE_EXTENSION: case V4L2_CID_MPEG_AUDIO_EMPHASIS: @@ -495,7 +522,7 @@ int v4l2_ctrl_query_fill_std(struct v4l2_queryctrl *qctrl) case V4L2_CID_MPEG_AUDIO_ENCODING: return v4l2_ctrl_query_fill(qctrl, V4L2_MPEG_AUDIO_ENCODING_LAYER_1, - V4L2_MPEG_AUDIO_ENCODING_AAC, 1, + V4L2_MPEG_AUDIO_ENCODING_AC3, 1, V4L2_MPEG_AUDIO_ENCODING_LAYER_2); case V4L2_CID_MPEG_AUDIO_L1_BITRATE: return v4l2_ctrl_query_fill(qctrl, @@ -512,6 +539,11 @@ int v4l2_ctrl_query_fill_std(struct v4l2_queryctrl *qctrl) V4L2_MPEG_AUDIO_L3_BITRATE_32K, V4L2_MPEG_AUDIO_L3_BITRATE_320K, 1, V4L2_MPEG_AUDIO_L3_BITRATE_192K); + case V4L2_CID_MPEG_AUDIO_AC3_BITRATE: + return v4l2_ctrl_query_fill(qctrl, + V4L2_MPEG_AUDIO_AC3_BITRATE_32K, + V4L2_MPEG_AUDIO_AC3_BITRATE_640K, 1, + V4L2_MPEG_AUDIO_AC3_BITRATE_384K); case V4L2_CID_MPEG_AUDIO_MODE: return v4l2_ctrl_query_fill(qctrl, V4L2_MPEG_AUDIO_MODE_STEREO, diff --git a/include/linux/videodev2.h b/include/linux/videodev2.h index 350aba2..9054764 100644 --- a/include/linux/videodev2.h +++ b/include/linux/videodev2.h @@ -911,6 +911,7 @@ enum v4l2_mpeg_audio_encoding { V4L2_MPEG_AUDIO_ENCODING_LAYER_2 = 1, V4L2_MPEG_AUDIO_ENCODING_LAYER_3 = 2, V4L2_MPEG_AUDIO_ENCODING_AAC = 3, + V4L2_MPEG_AUDIO_ENCODING_AC3 = 4, }; #define V4L2_CID_MPEG_AUDIO_L1_BITRATE (V4L2_CID_MPEG_BASE+102) enum v4l2_mpeg_audio_l1_bitrate { @@ -989,6 +990,28 @@ enum v4l2_mpeg_audio_crc { V4L2_MPEG_AUDIO_CRC_CRC16 = 1, }; #define V4L2_CID_MPEG_AUDIO_MUTE (V4L2_CID_MPEG_BASE+109) +#define V4L2_CID_MPEG_AUDIO_AC3_BITRATE (V4L2_CID_MPEG_BASE+110) +enum v4l2_mpeg_audio_ac3_bitrate { + V4L2_MPEG_AUDIO_AC3_BITRATE_32K = 0, + V4L2_MPEG_AUDIO_AC3_BITRATE_40K = 1, + V4L2_MPEG_AUDIO_AC3_BITRATE_48K = 2, + V4L2_MPEG_AUDIO_AC3_BITRATE_56K = 3, + V4L2_MPEG_AUDIO_AC3_BITRATE_64K = 4, + V4L2_MPEG_AUDIO_AC3_BITRATE_80K = 5, + V4L2_MPEG_AUDIO_AC3_BITRATE_96K = 6, + V4L2_MPEG_AUDIO_AC3_BITRATE_112K = 7, + V4L2_MPEG_AUDIO_AC3_BITRATE_128K = 8, + V4L2_MPEG_AUDIO_AC3_BITRATE_160K = 9, + V4L2_MPEG_AUDIO_AC3_BITRATE_192K = 10, + V4L2_MPEG_AUDIO_AC3_BITRATE_224K = 11, + V4L2_MPEG_AUDIO_AC3_BITRATE_256K = 12, + V4L2_MPEG_AUDIO_AC3_BITRATE_320K = 13, + V4L2_MPEG_AUDIO_AC3_BITRATE_384K = 14, + V4L2_MPEG_AUDIO_AC3_BITRATE_448K = 15, + V4L2_MPEG_AUDIO_AC3_BITRATE_512K = 16, + V4L2_MPEG_AUDIO_AC3_BITRATE_576K = 17, + V4L2_MPEG_AUDIO_AC3_BITRATE_640K = 18, +}; /* MPEG video */ #define V4L2_CID_MPEG_VIDEO_ENCODING (V4L2_CID_MPEG_BASE+200) -- cgit v0.10.2 From 69028d7096a6092812f0482833f0820593f1cafd Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Fri, 8 Aug 2008 07:55:00 -0300 Subject: V4L/DVB (8636): v4l2: add v4l2_ctrl_get_name control support function. Add function that returns the control name. Allows this to be used in places where the normal v4l2_ctrl_query_fill() function cannot be used (e.g. uvc). Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/v4l2-common.c b/drivers/media/video/v4l2-common.c index 0a96cc3..da4791d 100644 --- a/drivers/media/video/v4l2-common.c +++ b/drivers/media/video/v4l2-common.c @@ -362,63 +362,72 @@ const char **v4l2_ctrl_get_menu(u32 id) } EXPORT_SYMBOL(v4l2_ctrl_get_menu); -/* Fill in a struct v4l2_queryctrl */ -int v4l2_ctrl_query_fill(struct v4l2_queryctrl *qctrl, s32 min, s32 max, s32 step, s32 def) +/* Return the control name. */ +const char *v4l2_ctrl_get_name(u32 id) { - const char *name; - - qctrl->flags = 0; - switch (qctrl->id) { + switch (id) { /* USER controls */ - case V4L2_CID_USER_CLASS: name = "User Controls"; break; - case V4L2_CID_AUDIO_VOLUME: name = "Volume"; break; - case V4L2_CID_AUDIO_MUTE: name = "Mute"; break; - case V4L2_CID_AUDIO_BALANCE: name = "Balance"; break; - case V4L2_CID_AUDIO_BASS: name = "Bass"; break; - case V4L2_CID_AUDIO_TREBLE: name = "Treble"; break; - case V4L2_CID_AUDIO_LOUDNESS: name = "Loudness"; break; - case V4L2_CID_BRIGHTNESS: name = "Brightness"; break; - case V4L2_CID_CONTRAST: name = "Contrast"; break; - case V4L2_CID_SATURATION: name = "Saturation"; break; - case V4L2_CID_HUE: name = "Hue"; break; + case V4L2_CID_USER_CLASS: return "User Controls"; + case V4L2_CID_AUDIO_VOLUME: return "Volume"; + case V4L2_CID_AUDIO_MUTE: return "Mute"; + case V4L2_CID_AUDIO_BALANCE: return "Balance"; + case V4L2_CID_AUDIO_BASS: return "Bass"; + case V4L2_CID_AUDIO_TREBLE: return "Treble"; + case V4L2_CID_AUDIO_LOUDNESS: return "Loudness"; + case V4L2_CID_BRIGHTNESS: return "Brightness"; + case V4L2_CID_CONTRAST: return "Contrast"; + case V4L2_CID_SATURATION: return "Saturation"; + case V4L2_CID_HUE: return "Hue"; /* MPEG controls */ - case V4L2_CID_MPEG_CLASS: name = "MPEG Encoder Controls"; break; - case V4L2_CID_MPEG_AUDIO_SAMPLING_FREQ: name = "Audio Sampling Frequency"; break; - case V4L2_CID_MPEG_AUDIO_ENCODING: name = "Audio Encoding"; break; - case V4L2_CID_MPEG_AUDIO_L1_BITRATE: name = "Audio Layer I Bitrate"; break; - case V4L2_CID_MPEG_AUDIO_L2_BITRATE: name = "Audio Layer II Bitrate"; break; - case V4L2_CID_MPEG_AUDIO_L3_BITRATE: name = "Audio Layer III Bitrate"; break; - case V4L2_CID_MPEG_AUDIO_AC3_BITRATE: name = "Audio AC-3 Bitrate"; break; - case V4L2_CID_MPEG_AUDIO_MODE: name = "Audio Stereo Mode"; break; - case V4L2_CID_MPEG_AUDIO_MODE_EXTENSION: name = "Audio Stereo Mode Extension"; break; - case V4L2_CID_MPEG_AUDIO_EMPHASIS: name = "Audio Emphasis"; break; - case V4L2_CID_MPEG_AUDIO_CRC: name = "Audio CRC"; break; - case V4L2_CID_MPEG_AUDIO_MUTE: name = "Audio Mute"; break; - case V4L2_CID_MPEG_VIDEO_ENCODING: name = "Video Encoding"; break; - case V4L2_CID_MPEG_VIDEO_ASPECT: name = "Video Aspect"; break; - case V4L2_CID_MPEG_VIDEO_B_FRAMES: name = "Video B Frames"; break; - case V4L2_CID_MPEG_VIDEO_GOP_SIZE: name = "Video GOP Size"; break; - case V4L2_CID_MPEG_VIDEO_GOP_CLOSURE: name = "Video GOP Closure"; break; - case V4L2_CID_MPEG_VIDEO_PULLDOWN: name = "Video Pulldown"; break; - case V4L2_CID_MPEG_VIDEO_BITRATE_MODE: name = "Video Bitrate Mode"; break; - case V4L2_CID_MPEG_VIDEO_BITRATE: name = "Video Bitrate"; break; - case V4L2_CID_MPEG_VIDEO_BITRATE_PEAK: name = "Video Peak Bitrate"; break; - case V4L2_CID_MPEG_VIDEO_TEMPORAL_DECIMATION: name = "Video Temporal Decimation"; break; - case V4L2_CID_MPEG_VIDEO_MUTE: name = "Video Mute"; break; - case V4L2_CID_MPEG_VIDEO_MUTE_YUV: name = "Video Mute YUV"; break; - case V4L2_CID_MPEG_STREAM_TYPE: name = "Stream Type"; break; - case V4L2_CID_MPEG_STREAM_PID_PMT: name = "Stream PMT Program ID"; break; - case V4L2_CID_MPEG_STREAM_PID_AUDIO: name = "Stream Audio Program ID"; break; - case V4L2_CID_MPEG_STREAM_PID_VIDEO: name = "Stream Video Program ID"; break; - case V4L2_CID_MPEG_STREAM_PID_PCR: name = "Stream PCR Program ID"; break; - case V4L2_CID_MPEG_STREAM_PES_ID_AUDIO: name = "Stream PES Audio ID"; break; - case V4L2_CID_MPEG_STREAM_PES_ID_VIDEO: name = "Stream PES Video ID"; break; - case V4L2_CID_MPEG_STREAM_VBI_FMT: name = "Stream VBI Format"; break; + case V4L2_CID_MPEG_CLASS: return "MPEG Encoder Controls"; + case V4L2_CID_MPEG_AUDIO_SAMPLING_FREQ: return "Audio Sampling Frequency"; + case V4L2_CID_MPEG_AUDIO_ENCODING: return "Audio Encoding"; + case V4L2_CID_MPEG_AUDIO_L1_BITRATE: return "Audio Layer I Bitrate"; + case V4L2_CID_MPEG_AUDIO_L2_BITRATE: return "Audio Layer II Bitrate"; + case V4L2_CID_MPEG_AUDIO_L3_BITRATE: return "Audio Layer III Bitrate"; + case V4L2_CID_MPEG_AUDIO_AC3_BITRATE: return "Audio AC-3 Bitrate"; + case V4L2_CID_MPEG_AUDIO_MODE: return "Audio Stereo Mode"; + case V4L2_CID_MPEG_AUDIO_MODE_EXTENSION: return "Audio Stereo Mode Extension"; + case V4L2_CID_MPEG_AUDIO_EMPHASIS: return "Audio Emphasis"; + case V4L2_CID_MPEG_AUDIO_CRC: return "Audio CRC"; + case V4L2_CID_MPEG_AUDIO_MUTE: return "Audio Mute"; + case V4L2_CID_MPEG_VIDEO_ENCODING: return "Video Encoding"; + case V4L2_CID_MPEG_VIDEO_ASPECT: return "Video Aspect"; + case V4L2_CID_MPEG_VIDEO_B_FRAMES: return "Video B Frames"; + case V4L2_CID_MPEG_VIDEO_GOP_SIZE: return "Video GOP Size"; + case V4L2_CID_MPEG_VIDEO_GOP_CLOSURE: return "Video GOP Closure"; + case V4L2_CID_MPEG_VIDEO_PULLDOWN: return "Video Pulldown"; + case V4L2_CID_MPEG_VIDEO_BITRATE_MODE: return "Video Bitrate Mode"; + case V4L2_CID_MPEG_VIDEO_BITRATE: return "Video Bitrate"; + case V4L2_CID_MPEG_VIDEO_BITRATE_PEAK: return "Video Peak Bitrate"; + case V4L2_CID_MPEG_VIDEO_TEMPORAL_DECIMATION: return "Video Temporal Decimation"; + case V4L2_CID_MPEG_VIDEO_MUTE: return "Video Mute"; + case V4L2_CID_MPEG_VIDEO_MUTE_YUV: return "Video Mute YUV"; + case V4L2_CID_MPEG_STREAM_TYPE: return "Stream Type"; + case V4L2_CID_MPEG_STREAM_PID_PMT: return "Stream PMT Program ID"; + case V4L2_CID_MPEG_STREAM_PID_AUDIO: return "Stream Audio Program ID"; + case V4L2_CID_MPEG_STREAM_PID_VIDEO: return "Stream Video Program ID"; + case V4L2_CID_MPEG_STREAM_PID_PCR: return "Stream PCR Program ID"; + case V4L2_CID_MPEG_STREAM_PES_ID_AUDIO: return "Stream PES Audio ID"; + case V4L2_CID_MPEG_STREAM_PES_ID_VIDEO: return "Stream PES Video ID"; + case V4L2_CID_MPEG_STREAM_VBI_FMT: return "Stream VBI Format"; default: - return -EINVAL; + return NULL; } +} +EXPORT_SYMBOL(v4l2_ctrl_get_name); + +/* Fill in a struct v4l2_queryctrl */ +int v4l2_ctrl_query_fill(struct v4l2_queryctrl *qctrl, s32 min, s32 max, s32 step, s32 def) +{ + const char *name = v4l2_ctrl_get_name(qctrl->id); + + qctrl->flags = 0; + if (name == NULL) + return -EINVAL; + switch (qctrl->id) { case V4L2_CID_AUDIO_MUTE: case V4L2_CID_AUDIO_LOUDNESS: diff --git a/include/media/v4l2-common.h b/include/media/v4l2-common.h index 07d3a9a..8b678e0 100644 --- a/include/media/v4l2-common.h +++ b/include/media/v4l2-common.h @@ -76,6 +76,7 @@ int v4l2_prio_check(struct v4l2_prio_state *global, enum v4l2_priority *local); int v4l2_ctrl_check(struct v4l2_ext_control *ctrl, struct v4l2_queryctrl *qctrl, const char **menu_items); +const char *v4l2_ctrl_get_name(u32 id); const char **v4l2_ctrl_get_menu(u32 id); int v4l2_ctrl_query_fill(struct v4l2_queryctrl *qctrl, s32 min, s32 max, s32 step, s32 def); int v4l2_ctrl_query_fill_std(struct v4l2_queryctrl *qctrl); -- cgit v0.10.2 From 1e55126666944c83bf98243564e25302f363e2a4 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Fri, 8 Aug 2008 08:34:19 -0300 Subject: V4L/DVB (8637): v4l2: add v4l2_ctrl_query_menu_valid_items support function v4l2_ctrl_query_menu_valid_items() makes it easy to handle control menus that have a lot of invalid 'holes'. For example, many MPEG encoders only support a limited subset of audio bitrates. In that case a driver can specify an array listing the set of valid bitrates and pass that to this function. Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/v4l2-common.c b/drivers/media/video/v4l2-common.c index da4791d..a523af7 100644 --- a/drivers/media/video/v4l2-common.c +++ b/drivers/media/video/v4l2-common.c @@ -643,6 +643,7 @@ int v4l2_ctrl_query_menu(struct v4l2_querymenu *qmenu, struct v4l2_queryctrl *qc { int i; + qmenu->reserved = 0; if (menu_items == NULL || (qctrl && (qmenu->index < qctrl->minimum || qmenu->index > qctrl->maximum))) return -EINVAL; @@ -650,11 +651,31 @@ int v4l2_ctrl_query_menu(struct v4l2_querymenu *qmenu, struct v4l2_queryctrl *qc if (menu_items[i] == NULL || menu_items[i][0] == '\0') return -EINVAL; snprintf(qmenu->name, sizeof(qmenu->name), menu_items[qmenu->index]); - qmenu->reserved = 0; return 0; } EXPORT_SYMBOL(v4l2_ctrl_query_menu); +/* Fill in a struct v4l2_querymenu based on the specified array of valid + menu items (terminated by V4L2_CTRL_MENU_IDS_END). + Use this if there are 'holes' in the list of valid menu items. */ +int v4l2_ctrl_query_menu_valid_items(struct v4l2_querymenu *qmenu, const u32 *ids) +{ + const char **menu_items = v4l2_ctrl_get_menu(qmenu->id); + + qmenu->reserved = 0; + if (menu_items == NULL || ids == NULL) + return -EINVAL; + while (*ids != V4L2_CTRL_MENU_IDS_END) { + if (*ids++ == qmenu->index) { + snprintf(qmenu->name, sizeof(qmenu->name), + menu_items[qmenu->index]); + return 0; + } + } + return -EINVAL; +} +EXPORT_SYMBOL(v4l2_ctrl_query_menu_valid_items); + /* ctrl_classes points to an array of u32 pointers, the last element is a NULL pointer. Each u32 array is a 0-terminated array of control IDs. Each array must be sorted low to high and belong to the same control diff --git a/include/media/v4l2-common.h b/include/media/v4l2-common.h index 8b678e0..0c195cc 100644 --- a/include/media/v4l2-common.h +++ b/include/media/v4l2-common.h @@ -82,6 +82,8 @@ int v4l2_ctrl_query_fill(struct v4l2_queryctrl *qctrl, s32 min, s32 max, s32 ste int v4l2_ctrl_query_fill_std(struct v4l2_queryctrl *qctrl); int v4l2_ctrl_query_menu(struct v4l2_querymenu *qmenu, struct v4l2_queryctrl *qctrl, const char **menu_items); +#define V4L2_CTRL_MENU_IDS_END (0xffffffff) +int v4l2_ctrl_query_menu_valid_items(struct v4l2_querymenu *qmenu, const u32 *ids); u32 v4l2_ctrl_next(const u32 * const *ctrl_classes, u32 id); /* ------------------------------------------------------------------------- */ -- cgit v0.10.2 From e281db5862743dbe1dab7f8fb423e699537036ee Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Fri, 8 Aug 2008 12:43:59 -0300 Subject: V4L/DVB (8639): saa6752hs: cleanup and add AC-3 support Cleaned up the saa6752hs i2c driver. Add AC-3 support. Add VIDIOC_CHIP_IDENT support. Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/saa7134/saa6752hs.c b/drivers/media/video/saa7134/saa6752hs.c index 707be17..ca725a7 100644 --- a/drivers/media/video/saa7134/saa6752hs.c +++ b/drivers/media/video/saa7134/saa6752hs.c @@ -1,3 +1,27 @@ + /* + saa6752hs - i2c-driver for the saa6752hs by Philips + + Copyright (C) 2004 Andrew de Quincey + + AC-3 support: + + Copyright (C) 2008 Hans Verkuil + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License vs published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mvss Ave, Cambridge, MA 02139, USA. + */ + #include #include #include @@ -10,6 +34,8 @@ #include #include #include +#include +#include #include #include @@ -27,9 +53,6 @@ MODULE_DESCRIPTION("device driver for saa6752hs MPEG2 encoder"); MODULE_AUTHOR("Andrew de Quincey"); MODULE_LICENSE("GPL"); -static struct i2c_driver driver; -static struct i2c_client client_template; - enum saa6752hs_videoformat { SAA6752HS_VF_D1 = 0, /* standard D1 video format: 720x576 */ SAA6752HS_VF_2_3_D1 = 1,/* 2/3D1 video format: 480x576 */ @@ -46,7 +69,9 @@ struct saa6752hs_mpeg_params { __u16 ts_pid_pcr; /* audio */ - enum v4l2_mpeg_audio_l2_bitrate au_l2_bitrate; + enum v4l2_mpeg_audio_encoding au_encoding; + enum v4l2_mpeg_audio_l2_bitrate au_l2_bitrate; + enum v4l2_mpeg_audio_ac3_bitrate au_ac3_bitrate; /* video */ enum v4l2_mpeg_video_aspect vi_aspect; @@ -70,7 +95,9 @@ static const struct v4l2_format v4l2_format_table[] = }; struct saa6752hs_state { - struct i2c_client client; + int chip; + u32 revision; + int has_ac3; struct saa6752hs_mpeg_params params; enum saa6752hs_videoformat video_format; v4l2_std_id standard; @@ -157,7 +184,9 @@ static struct saa6752hs_mpeg_params param_defaults = .vi_bitrate_peak = 6000, .vi_bitrate_mode = V4L2_MPEG_VIDEO_BITRATE_MODE_VBR, + .au_encoding = V4L2_MPEG_AUDIO_ENCODING_LAYER_2, .au_l2_bitrate = V4L2_MPEG_AUDIO_L2_BITRATE_256K, + .au_ac3_bitrate = V4L2_MPEG_AUDIO_AC3_BITRATE_384K, }; /* ---------------------------------------------------------------------- */ @@ -230,8 +259,9 @@ static int saa6752hs_chip_command(struct i2c_client* client, static int saa6752hs_set_bitrate(struct i2c_client* client, - struct saa6752hs_mpeg_params* params) + struct saa6752hs_state *h) { + struct saa6752hs_mpeg_params *params = &h->params; u8 buf[3]; int tot_bitrate; @@ -263,11 +293,22 @@ static int saa6752hs_set_bitrate(struct i2c_client* client, tot_bitrate = params->vi_bitrate; } + /* set the audio encoding */ + buf[0] = 0x93; + if (params->au_encoding == V4L2_MPEG_AUDIO_ENCODING_AC3) + buf[1] = 1; + else + buf[1] = 0; + i2c_master_send(client, buf, 2); + /* set the audio bitrate */ buf[0] = 0x94; - buf[1] = (V4L2_MPEG_AUDIO_L2_BITRATE_256K == params->au_l2_bitrate) ? 0 : 1; + if (params->au_encoding == V4L2_MPEG_AUDIO_ENCODING_AC3) + buf[1] = V4L2_MPEG_AUDIO_AC3_BITRATE_384K == params->au_ac3_bitrate; + else + buf[1] = V4L2_MPEG_AUDIO_L2_BITRATE_384K == params->au_l2_bitrate; + tot_bitrate += buf[1] ? 384 : 256; i2c_master_send(client, buf, 2); - tot_bitrate += (V4L2_MPEG_AUDIO_L2_BITRATE_256K == params->au_l2_bitrate) ? 256 : 384; /* Note: the total max bitrate is determined by adding the video and audio bitrates together and also adding an extra 768kbit/s to stay on the @@ -332,7 +373,7 @@ static void saa6752hs_set_subsampling(struct i2c_client* client, } -static int handle_ctrl(struct saa6752hs_mpeg_params *params, +static int handle_ctrl(int has_ac3, struct saa6752hs_mpeg_params *params, struct v4l2_ext_control *ctrl, unsigned int cmd) { int old = 0, new; @@ -379,8 +420,9 @@ static int handle_ctrl(struct saa6752hs_mpeg_params *params, params->ts_pid_pcr = new; break; case V4L2_CID_MPEG_AUDIO_ENCODING: - old = V4L2_MPEG_AUDIO_ENCODING_LAYER_2; - if (set && new != old) + old = params->au_encoding; + if (set && new != V4L2_MPEG_AUDIO_ENCODING_LAYER_2 && + (!has_ac3 || new != V4L2_MPEG_AUDIO_ENCODING_AC3)) return -ERANGE; new = old; break; @@ -395,6 +437,19 @@ static int handle_ctrl(struct saa6752hs_mpeg_params *params, new = V4L2_MPEG_AUDIO_L2_BITRATE_384K; params->au_l2_bitrate = new; break; + case V4L2_CID_MPEG_AUDIO_AC3_BITRATE: + if (!has_ac3) + return -EINVAL; + old = params->au_ac3_bitrate; + if (set && new != V4L2_MPEG_AUDIO_AC3_BITRATE_256K && + new != V4L2_MPEG_AUDIO_AC3_BITRATE_384K) + return -ERANGE; + if (new <= V4L2_MPEG_AUDIO_AC3_BITRATE_256K) + new = V4L2_MPEG_AUDIO_AC3_BITRATE_256K; + else + new = V4L2_MPEG_AUDIO_AC3_BITRATE_384K; + params->au_ac3_bitrate = new; + break; case V4L2_CID_MPEG_AUDIO_SAMPLING_FREQ: old = V4L2_MPEG_AUDIO_SAMPLING_FREQ_48000; if (set && new != old) @@ -448,17 +503,19 @@ static int handle_ctrl(struct saa6752hs_mpeg_params *params, return 0; } -static int saa6752hs_qctrl(struct saa6752hs_mpeg_params *params, +static int saa6752hs_qctrl(struct saa6752hs_state *h, struct v4l2_queryctrl *qctrl) { + struct saa6752hs_mpeg_params *params = &h->params; int err; switch (qctrl->id) { case V4L2_CID_MPEG_AUDIO_ENCODING: return v4l2_ctrl_query_fill(qctrl, V4L2_MPEG_AUDIO_ENCODING_LAYER_2, - V4L2_MPEG_AUDIO_ENCODING_LAYER_2, 1, - V4L2_MPEG_AUDIO_ENCODING_LAYER_2); + h->has_ac3 ? V4L2_MPEG_AUDIO_ENCODING_AC3 : + V4L2_MPEG_AUDIO_ENCODING_LAYER_2, + 1, V4L2_MPEG_AUDIO_ENCODING_LAYER_2); case V4L2_CID_MPEG_AUDIO_L2_BITRATE: return v4l2_ctrl_query_fill(qctrl, @@ -466,6 +523,14 @@ static int saa6752hs_qctrl(struct saa6752hs_mpeg_params *params, V4L2_MPEG_AUDIO_L2_BITRATE_384K, 1, V4L2_MPEG_AUDIO_L2_BITRATE_256K); + case V4L2_CID_MPEG_AUDIO_AC3_BITRATE: + if (!h->has_ac3) + return -EINVAL; + return v4l2_ctrl_query_fill(qctrl, + V4L2_MPEG_AUDIO_AC3_BITRATE_256K, + V4L2_MPEG_AUDIO_AC3_BITRATE_384K, 1, + V4L2_MPEG_AUDIO_AC3_BITRATE_256K); + case V4L2_CID_MPEG_AUDIO_SAMPLING_FREQ: return v4l2_ctrl_query_fill(qctrl, V4L2_MPEG_AUDIO_SAMPLING_FREQ_48000, @@ -512,38 +577,50 @@ static int saa6752hs_qctrl(struct saa6752hs_mpeg_params *params, return -EINVAL; } -static int saa6752hs_qmenu(struct saa6752hs_mpeg_params *params, +static int saa6752hs_qmenu(struct saa6752hs_state *h, struct v4l2_querymenu *qmenu) { - static const char *mpeg_audio_l2_bitrate[] = { - "", - "", - "", - "", - "", - "", - "", - "", - "", - "", - "", - "256 kbps", - "", - "384 kbps", - NULL + static const u32 mpeg_audio_encoding[] = { + V4L2_MPEG_AUDIO_ENCODING_LAYER_2, + V4L2_CTRL_MENU_IDS_END + }; + static const u32 mpeg_audio_ac3_encoding[] = { + V4L2_MPEG_AUDIO_ENCODING_LAYER_2, + V4L2_MPEG_AUDIO_ENCODING_AC3, + V4L2_CTRL_MENU_IDS_END + }; + static u32 mpeg_audio_l2_bitrate[] = { + V4L2_MPEG_AUDIO_L2_BITRATE_256K, + V4L2_MPEG_AUDIO_L2_BITRATE_384K, + V4L2_CTRL_MENU_IDS_END + }; + static u32 mpeg_audio_ac3_bitrate[] = { + V4L2_MPEG_AUDIO_AC3_BITRATE_256K, + V4L2_MPEG_AUDIO_AC3_BITRATE_384K, + V4L2_CTRL_MENU_IDS_END }; struct v4l2_queryctrl qctrl; int err; qctrl.id = qmenu->id; - err = saa6752hs_qctrl(params, &qctrl); + err = saa6752hs_qctrl(h, &qctrl); if (err) return err; - if (qmenu->id == V4L2_CID_MPEG_AUDIO_L2_BITRATE) - return v4l2_ctrl_query_menu(qmenu, &qctrl, + switch (qmenu->id) { + case V4L2_CID_MPEG_AUDIO_L2_BITRATE: + return v4l2_ctrl_query_menu_valid_items(qmenu, mpeg_audio_l2_bitrate); - return v4l2_ctrl_query_menu(qmenu, &qctrl, - v4l2_ctrl_get_menu(qmenu->id)); + case V4L2_CID_MPEG_AUDIO_AC3_BITRATE: + if (!h->has_ac3) + return -EINVAL; + return v4l2_ctrl_query_menu_valid_items(qmenu, + mpeg_audio_ac3_bitrate); + case V4L2_CID_MPEG_AUDIO_ENCODING: + return v4l2_ctrl_query_menu_valid_items(qmenu, + h->has_ac3 ? mpeg_audio_ac3_encoding : + mpeg_audio_encoding); + } + return v4l2_ctrl_query_menu(qmenu, &qctrl, NULL); } static int saa6752hs_init(struct i2c_client* client) @@ -569,7 +646,7 @@ static int saa6752hs_init(struct i2c_client* client) i2c_master_send(client, buf, 2); /* set bitrate */ - saa6752hs_set_bitrate(client, &h->params); + saa6752hs_set_bitrate(client, h); /* Set GOP structure {3, 13} */ buf[0] = 0x72; @@ -688,45 +765,6 @@ static int saa6752hs_init(struct i2c_client* client) return 0; } -static int saa6752hs_attach(struct i2c_adapter *adap, int addr, int kind) -{ - struct saa6752hs_state *h; - - - if (NULL == (h = kzalloc(sizeof(*h), GFP_KERNEL))) - return -ENOMEM; - h->client = client_template; - h->params = param_defaults; - h->client.adapter = adap; - h->client.addr = addr; - - /* Assume 625 input lines */ - h->standard = 0; - - i2c_set_clientdata(&h->client, h); - i2c_attach_client(&h->client); - - v4l_info(&h->client,"saa6752hs: chip found @ 0x%x\n", addr<<1); - return 0; -} - -static int saa6752hs_probe(struct i2c_adapter *adap) -{ - if (adap->class & I2C_CLASS_TV_ANALOG) - return i2c_probe(adap, &addr_data, saa6752hs_attach); - return 0; -} - -static int saa6752hs_detach(struct i2c_client *client) -{ - struct saa6752hs_state *h; - - h = i2c_get_clientdata(client); - i2c_detach_client(client); - kfree(h); - return 0; -} - static int saa6752hs_command(struct i2c_client *client, unsigned int cmd, void *arg) { @@ -752,7 +790,8 @@ saa6752hs_command(struct i2c_client *client, unsigned int cmd, void *arg) return -EINVAL; params = h->params; for (i = 0; i < ctrls->count; i++) { - if ((err = handle_ctrl(¶ms, ctrls->controls + i, cmd))) { + err = handle_ctrl(h->has_ac3, ¶ms, ctrls->controls + i, cmd); + if (err) { ctrls->error_idx = i; return err; } @@ -760,9 +799,9 @@ saa6752hs_command(struct i2c_client *client, unsigned int cmd, void *arg) h->params = params; break; case VIDIOC_QUERYCTRL: - return saa6752hs_qctrl(&h->params, arg); + return saa6752hs_qctrl(h, arg); case VIDIOC_QUERYMENU: - return saa6752hs_qmenu(&h->params, arg); + return saa6752hs_qmenu(h, arg); case VIDIOC_G_FMT: { struct v4l2_format *f = arg; @@ -785,6 +824,11 @@ saa6752hs_command(struct i2c_client *client, unsigned int cmd, void *arg) case VIDIOC_S_STD: h->standard = *((v4l2_std_id *) arg); break; + + case VIDIOC_G_CHIP_IDENT: + return v4l2_chip_ident_i2c_client(client, + arg, h->chip, h->revision); + default: /* nothing */ break; @@ -793,36 +837,55 @@ saa6752hs_command(struct i2c_client *client, unsigned int cmd, void *arg) return err; } -/* ----------------------------------------------------------------------- */ +static int saa6752hs_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct saa6752hs_state *h = kzalloc(sizeof(*h), GFP_KERNEL); + u8 addr = 0x13; + u8 data[12]; -static struct i2c_driver driver = { - .driver = { - .name = "saa6752hs", - }, - .id = I2C_DRIVERID_SAA6752HS, - .attach_adapter = saa6752hs_probe, - .detach_client = saa6752hs_detach, - .command = saa6752hs_command, -}; + v4l_info(client, "chip found @ 0x%x (%s)\n", + client->addr << 1, client->adapter->name); + if (h == NULL) + return -ENOMEM; -static struct i2c_client client_template = -{ - .name = "saa6752hs", - .driver = &driver, -}; + i2c_master_send(client, &addr, 1); + i2c_master_recv(client, data, sizeof(data)); + h->chip = V4L2_IDENT_SAA6752HS; + h->revision = (data[8] << 8) | data[9]; + h->has_ac3 = 0; + if (h->revision == 0x0206) { + h->chip = V4L2_IDENT_SAA6752HS_AC3; + h->has_ac3 = 1; + v4l_info(client, "support AC-3\n"); + } + h->params = param_defaults; + h->standard = 0; /* Assume 625 input lines */ -static int __init saa6752hs_init_module(void) -{ - return i2c_add_driver(&driver); + i2c_set_clientdata(client, h); + return 0; } -static void __exit saa6752hs_cleanup_module(void) +static int saa6752hs_remove(struct i2c_client *client) { - i2c_del_driver(&driver); + kfree(i2c_get_clientdata(client)); + return 0; } -module_init(saa6752hs_init_module); -module_exit(saa6752hs_cleanup_module); +static const struct i2c_device_id saa6752hs_id[] = { + { "saa6752hs", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, saa6752hs_id); + +static struct v4l2_i2c_driver_data v4l2_i2c_data = { + .name = "saa6752hs", + .driverid = I2C_DRIVERID_SAA6752HS, + .command = saa6752hs_command, + .probe = saa6752hs_probe, + .remove = saa6752hs_remove, + .id_table = saa6752hs_id, +}; /* * Overrides for Emacs so that we follow Linus's tabbing style. diff --git a/drivers/media/video/saa7134/saa7134-empress.c b/drivers/media/video/saa7134/saa7134-empress.c index 6f423d1..f5a186a 100644 --- a/drivers/media/video/saa7134/saa7134-empress.c +++ b/drivers/media/video/saa7134/saa7134-empress.c @@ -29,6 +29,7 @@ #include #include +#include /* ------------------------------------------------------------------ */ @@ -403,6 +404,25 @@ static int empress_querymenu(struct file *file, void *priv, return saa7134_i2c_call_saa6752(dev, VIDIOC_QUERYMENU, c); } +static int empress_g_chip_ident(struct file *file, void *fh, + struct v4l2_chip_ident *chip) +{ + struct saa7134_dev *dev = file->private_data; + + chip->ident = V4L2_IDENT_NONE; + chip->revision = 0; + if (dev->mpeg_i2c_client == NULL) + return -EINVAL; + if (chip->match_type == V4L2_CHIP_MATCH_I2C_DRIVER && + chip->match_chip == I2C_DRIVERID_SAA6752HS) + return saa7134_i2c_call_saa6752(dev, VIDIOC_G_CHIP_IDENT, chip); + if (chip->match_type == V4L2_CHIP_MATCH_I2C_ADDR && + chip->match_chip == dev->mpeg_i2c_client->addr) + return saa7134_i2c_call_saa6752(dev, VIDIOC_G_CHIP_IDENT, chip); + return -EINVAL; +} + + static const struct file_operations ts_fops = { .owner = THIS_MODULE, @@ -431,11 +451,11 @@ static const struct v4l2_ioctl_ops ts_ioctl_ops = { .vidioc_enum_input = empress_enum_input, .vidioc_g_input = empress_g_input, .vidioc_s_input = empress_s_input, - .vidioc_queryctrl = empress_queryctrl, .vidioc_querymenu = empress_querymenu, .vidioc_g_ctrl = empress_g_ctrl, .vidioc_s_ctrl = empress_s_ctrl, + .vidioc_g_chip_ident = empress_g_chip_ident, }; /* ----------------------------------------------------------- */ diff --git a/drivers/media/video/v4l2-common.c b/drivers/media/video/v4l2-common.c index a523af7..0c51183 100644 --- a/drivers/media/video/v4l2-common.c +++ b/drivers/media/video/v4l2-common.c @@ -637,13 +637,17 @@ int v4l2_ctrl_query_fill_std(struct v4l2_queryctrl *qctrl) EXPORT_SYMBOL(v4l2_ctrl_query_fill_std); /* Fill in a struct v4l2_querymenu based on the struct v4l2_queryctrl and - the menu. The qctrl pointer may be NULL, in which case it is ignored. */ + the menu. The qctrl pointer may be NULL, in which case it is ignored. + If menu_items is NULL, then the menu items are retrieved using + v4l2_ctrl_get_menu. */ int v4l2_ctrl_query_menu(struct v4l2_querymenu *qmenu, struct v4l2_queryctrl *qctrl, const char **menu_items) { int i; qmenu->reserved = 0; + if (menu_items == NULL) + menu_items = v4l2_ctrl_get_menu(qmenu->id); if (menu_items == NULL || (qctrl && (qmenu->index < qctrl->minimum || qmenu->index > qctrl->maximum))) return -EINVAL; diff --git a/include/media/v4l2-chip-ident.h b/include/media/v4l2-chip-ident.h index 41b509b..be782d5 100644 --- a/include/media/v4l2-chip-ident.h +++ b/include/media/v4l2-chip-ident.h @@ -72,6 +72,10 @@ enum { /* module cs5345: just ident 5345 */ V4L2_IDENT_CS5345 = 5345, + /* module saa6752hs: reserved range 6750-6759 */ + V4L2_IDENT_SAA6752HS = 6752, + V4L2_IDENT_SAA6752HS_AC3 = 6753, + /* module wm8739: just ident 8739 */ V4L2_IDENT_WM8739 = 8739, -- cgit v0.10.2 From 3eea543b7282bea38970f20840acff9e230d0c2a Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Fri, 8 Aug 2008 13:27:16 -0300 Subject: V4L/DVB (8640): saa6752hs: add PMT table for AC3 The PMT table for AC3 audio is different. Thanks to Dmitry Belimov for providing the table data. Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/saa7134/saa6752hs.c b/drivers/media/video/saa7134/saa6752hs.c index ca725a7..28499e5 100644 --- a/drivers/media/video/saa7134/saa6752hs.c +++ b/drivers/media/video/saa7134/saa6752hs.c @@ -172,6 +172,39 @@ static u8 PMT[] = { 0x00, 0x00, 0x00, 0x00 /* CRC32 */ }; +static u8 PMT_AC3[] = { + 0xc2, /* i2c register */ + 0x01, /* table number for encoder(1) */ + 0x47, /* sync */ + + 0x40, /* transport_error_indicator(0), payload_unit_start(1), transport_priority(0) */ + 0x10, /* PMT PID (0x0010) */ + 0x10, /* transport_scrambling_control(00), adaptation_field_control(01), continuity_counter(0) */ + + 0x00, /* PSI pointer to start of table */ + + 0x02, /* TID (2) */ + 0xb0, 0x1a, /* section_syntax_indicator(1), section_length(26) */ + + 0x00, 0x01, /* program_number(1) */ + + 0xc1, /* version_number(0), current_next_indicator(1) */ + + 0x00, 0x00, /* section_number(0), last_section_number(0) */ + + 0xe1, 0x04, /* PCR_PID (0x0104) */ + + 0xf0, 0x00, /* program_info_length(0) */ + + 0x02, 0xe1, 0x00, 0xf0, 0x00, /* video stream type(2), pid */ + 0x06, 0xe1, 0x03, 0xf0, 0x03, /* audio stream type(6), pid */ + 0x6a, /* AC3 */ + 0x01, /* Descriptor_length(1) */ + 0x00, /* component_type_flag(0), bsid_flag(0), mainid_flag(0), asvc_flag(0), reserved flags(0) */ + + 0xED, 0xDE, 0x2D, 0xF3 /* CRC32 BE */ +}; + static struct saa6752hs_mpeg_params param_defaults = { .ts_pid_pmt = 16, @@ -186,7 +219,7 @@ static struct saa6752hs_mpeg_params param_defaults = .au_encoding = V4L2_MPEG_AUDIO_ENCODING_LAYER_2, .au_l2_bitrate = V4L2_MPEG_AUDIO_L2_BITRATE_256K, - .au_ac3_bitrate = V4L2_MPEG_AUDIO_AC3_BITRATE_384K, + .au_ac3_bitrate = V4L2_MPEG_AUDIO_AC3_BITRATE_256K, }; /* ---------------------------------------------------------------------- */ @@ -295,10 +328,7 @@ static int saa6752hs_set_bitrate(struct i2c_client* client, /* set the audio encoding */ buf[0] = 0x93; - if (params->au_encoding == V4L2_MPEG_AUDIO_ENCODING_AC3) - buf[1] = 1; - else - buf[1] = 0; + buf[1] = (params->au_encoding == V4L2_MPEG_AUDIO_ENCODING_AC3); i2c_master_send(client, buf, 2); /* set the audio bitrate */ @@ -627,6 +657,7 @@ static int saa6752hs_init(struct i2c_client* client) { unsigned char buf[9], buf2[4]; struct saa6752hs_state *h; + unsigned size; u32 crc; unsigned char localPAT[256]; unsigned char localPMT[256]; @@ -685,7 +716,13 @@ static int saa6752hs_init(struct i2c_client* client) localPAT[sizeof(PAT) - 1] = crc & 0xFF; /* compute PMT */ - memcpy(localPMT, PMT, sizeof(PMT)); + if (h->params.au_encoding == V4L2_MPEG_AUDIO_ENCODING_AC3) { + size = sizeof(PMT_AC3); + memcpy(localPMT, PMT_AC3, size); + } else { + size = sizeof(PMT); + memcpy(localPMT, PMT, size); + } localPMT[3] = 0x40 | ((h->params.ts_pid_pmt >> 8) & 0x0f); localPMT[4] = h->params.ts_pid_pmt & 0xff; localPMT[15] = 0xE0 | ((h->params.ts_pid_pcr >> 8) & 0x0F); @@ -694,11 +731,11 @@ static int saa6752hs_init(struct i2c_client* client) localPMT[21] = h->params.ts_pid_video & 0xFF; localPMT[25] = 0xE0 | ((h->params.ts_pid_audio >> 8) & 0x0F); localPMT[26] = h->params.ts_pid_audio & 0xFF; - crc = crc32_be(~0, &localPMT[7], sizeof(PMT) - 7 - 4); - localPMT[sizeof(PMT) - 4] = (crc >> 24) & 0xFF; - localPMT[sizeof(PMT) - 3] = (crc >> 16) & 0xFF; - localPMT[sizeof(PMT) - 2] = (crc >> 8) & 0xFF; - localPMT[sizeof(PMT) - 1] = crc & 0xFF; + crc = crc32_be(~0, &localPMT[7], size - 7 - 4); + localPMT[size - 4] = (crc >> 24) & 0xFF; + localPMT[size - 3] = (crc >> 16) & 0xFF; + localPMT[size - 2] = (crc >> 8) & 0xFF; + localPMT[size - 1] = crc & 0xFF; /* Set Audio PID */ buf[0] = 0xC1; @@ -719,8 +756,8 @@ static int saa6752hs_init(struct i2c_client* client) i2c_master_send(client,buf,3); /* Send SI tables */ - i2c_master_send(client,localPAT,sizeof(PAT)); - i2c_master_send(client,localPMT,sizeof(PMT)); + i2c_master_send(client, localPAT, sizeof(PAT)); + i2c_master_send(client, localPMT, size); /* mute then unmute audio. This removes buzzing artefacts */ buf[0] = 0xa4; -- cgit v0.10.2 From ad4eada70b2a145aabb1814fdc080480f796decb Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Fri, 8 Aug 2008 15:47:07 -0300 Subject: V4L/DVB (8641): arv: fix compilation errors/warnings - add PCI dependency for btcx - fix compile errors (doesn't like ';' at the end of a #if 0) Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig index 1f6c9ee..367666d 100644 --- a/drivers/media/video/Kconfig +++ b/drivers/media/video/Kconfig @@ -34,6 +34,7 @@ config VIDEOBUF_DVB select VIDEOBUF_GEN config VIDEO_BTCX + depends on PCI tristate config VIDEO_IR -- cgit v0.10.2 From 0fbbff33fcab605b1a5c53a20c302aad24b082ef Mon Sep 17 00:00:00 2001 From: Steven Toth Date: Mon, 4 Aug 2008 21:36:49 -0300 Subject: V4L/DVB (8642): cx23885: Factor out common cx23885 tuner callback Tuners currently hook different things to the private pointer in their callback function. Longer term we should make that private pointer consistent, but for now separate out the guts of the cx23885 tuner callback so we can reuse it. Signed-off-by: Steven Toth Signed-off-by: Anton Blanchard Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/cx23885/cx23885-cards.c b/drivers/media/video/cx23885/cx23885-cards.c index c36d3f6..e5e688e 100644 --- a/drivers/media/video/cx23885/cx23885-cards.c +++ b/drivers/media/video/cx23885/cx23885-cards.c @@ -319,13 +319,9 @@ static void hauppauge_eeprom(struct cx23885_dev *dev, u8 *eeprom_data) dev->name, tv.model); } -/* Tuner callback function for cx23885 boards. Currently only needed - * for HVR1500Q, which has an xc5000 tuner. - */ -int cx23885_tuner_callback(void *priv, int command, int arg) +static int cx23885_tuner_callback(struct cx23885_dev *dev, int port, + int command, int arg) { - struct cx23885_i2c *bus = priv; - struct cx23885_dev *dev = bus->dev; u32 bitmask = 0; if (command != 0) { @@ -345,9 +341,9 @@ int cx23885_tuner_callback(void *priv, int command, int arg) /* Two identical tuners on two different i2c buses, * we need to reset the correct gpio. */ - if (bus->nr == 0) + if (port == 0) bitmask = 0x01; - else if (bus->nr == 1) + else if (port == 1) bitmask = 0x04; } break; @@ -363,6 +359,14 @@ int cx23885_tuner_callback(void *priv, int command, int arg) return 0; } +int cx23885_xc5000_tuner_callback(void *priv, int command, int arg) +{ + struct cx23885_i2c *bus = priv; + struct cx23885_dev *dev = bus->dev; + + return cx23885_tuner_callback(dev, bus->nr, command, arg); +} + void cx23885_gpio_setup(struct cx23885_dev *dev) { switch(dev->board) { diff --git a/drivers/media/video/cx23885/cx23885-dvb.c b/drivers/media/video/cx23885/cx23885-dvb.c index 291b9d0..bfe49df 100644 --- a/drivers/media/video/cx23885/cx23885-dvb.c +++ b/drivers/media/video/cx23885/cx23885-dvb.c @@ -188,13 +188,13 @@ static struct s5h1411_config dvico_s5h1411_config = { static struct xc5000_config hauppauge_hvr1500q_tunerconfig = { .i2c_address = 0x61, .if_khz = 5380, - .tuner_callback = cx23885_tuner_callback + .tuner_callback = cx23885_xc5000_tuner_callback, }; static struct xc5000_config dvico_xc5000_tunerconfig = { .i2c_address = 0x64, .if_khz = 5380, - .tuner_callback = cx23885_tuner_callback + .tuner_callback = cx23885_xc5000_tuner_callback, }; static struct tda829x_config tda829x_no_probe = { diff --git a/drivers/media/video/cx23885/cx23885.h b/drivers/media/video/cx23885/cx23885.h index e23d97c..c3478b2 100644 --- a/drivers/media/video/cx23885/cx23885.h +++ b/drivers/media/video/cx23885/cx23885.h @@ -409,7 +409,7 @@ extern const unsigned int cx23885_bcount; extern struct cx23885_subid cx23885_subids[]; extern const unsigned int cx23885_idcount; -extern int cx23885_tuner_callback(void *priv, int command, int arg); +extern int cx23885_xc5000_tuner_callback(void *priv, int command, int arg); extern void cx23885_card_list(struct cx23885_dev *dev); extern int cx23885_ir_init(struct cx23885_dev *dev); extern void cx23885_gpio_setup(struct cx23885_dev *dev); -- cgit v0.10.2 From 90a71b1c1ab003dd4524afca44c2ad2519f4420c Mon Sep 17 00:00:00 2001 From: Steven Toth Date: Mon, 4 Aug 2008 21:38:46 -0300 Subject: V4L/DVB (8643): Switch Hauppauge HVR1400 and HVR1500 to common cx23885 tuner callback The Hauppauge HVR1400 and HVR1500 can now use the common cx23885 tuner callback. Signed-off-by: Steven Toth Signed-off-by: Anton Blanchard Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/cx23885/cx23885-cards.c b/drivers/media/video/cx23885/cx23885-cards.c index e5e688e..93ad7f8 100644 --- a/drivers/media/video/cx23885/cx23885-cards.c +++ b/drivers/media/video/cx23885/cx23885-cards.c @@ -26,6 +26,7 @@ #include #include "cx23885.h" +#include "tuner-xc2028.h" /* ------------------------------------------------------------------ */ /* board config info */ @@ -331,8 +332,10 @@ static int cx23885_tuner_callback(struct cx23885_dev *dev, int port, } switch(dev->board) { + case CX23885_BOARD_HAUPPAUGE_HVR1400: + case CX23885_BOARD_HAUPPAUGE_HVR1500: case CX23885_BOARD_HAUPPAUGE_HVR1500Q: - /* Tuner Reset Command from xc5000 */ + /* Tuner Reset Command */ if (command == 0) bitmask = 0x04; break; @@ -367,6 +370,17 @@ int cx23885_xc5000_tuner_callback(void *priv, int command, int arg) return cx23885_tuner_callback(dev, bus->nr, command, arg); } +int cx23885_xc3028_tuner_callback(void *priv, int command, int arg) +{ + struct cx23885_tsport *port = priv; + struct cx23885_dev *dev = port->dev; + + if (command == XC2028_RESET_CLK) + return 0; + + return cx23885_tuner_callback(dev, port->nr, command, arg); +} + void cx23885_gpio_setup(struct cx23885_dev *dev) { switch(dev->board) { diff --git a/drivers/media/video/cx23885/cx23885-dvb.c b/drivers/media/video/cx23885/cx23885-dvb.c index bfe49df..4567005 100644 --- a/drivers/media/video/cx23885/cx23885-dvb.c +++ b/drivers/media/video/cx23885/cx23885-dvb.c @@ -303,36 +303,6 @@ static struct dib7000p_config hauppauge_hvr1400_dib7000_config = { .output_mode = OUTMODE_MPEG2_SERIAL, }; -static int cx23885_hvr1500_xc3028_callback(void *ptr, int command, int arg) -{ - struct cx23885_tsport *port = ptr; - struct cx23885_dev *dev = port->dev; - - switch (command) { - case XC2028_TUNER_RESET: - /* Send the tuner in then out of reset */ - /* GPIO-2 xc3028 tuner */ - dprintk(1, "%s: XC2028_TUNER_RESET %d\n", __func__, arg); - - cx_set(GP0_IO, 0x00040000); - cx_clear(GP0_IO, 0x00000004); - msleep(5); - - cx_set(GP0_IO, 0x00040004); - msleep(5); - break; - case XC2028_RESET_CLK: - dprintk(1, "%s: XC2028_RESET_CLK %d\n", __func__, arg); - break; - default: - dprintk(1, "%s: unknown command %d, arg %d\n", __func__, - command, arg); - return -EINVAL; - } - - return 0; -} - static int dvb_register(struct cx23885_tsport *port) { struct cx23885_dev *dev = port->dev; @@ -426,7 +396,7 @@ static int dvb_register(struct cx23885_tsport *port) struct xc2028_config cfg = { .i2c_adap = &i2c_bus->i2c_adap, .i2c_addr = 0x61, - .callback = cx23885_hvr1500_xc3028_callback, + .callback = cx23885_xc3028_tuner_callback, }; static struct xc2028_ctrl ctl = { .fname = "xc3028-v27.fw", @@ -465,7 +435,7 @@ static int dvb_register(struct cx23885_tsport *port) struct xc2028_config cfg = { .i2c_adap = &dev->i2c_bus[1].i2c_adap, .i2c_addr = 0x64, - .callback = cx23885_hvr1500_xc3028_callback, + .callback = cx23885_xc3028_tuner_callback, }; static struct xc2028_ctrl ctl = { .fname = "xc3028L-v36.fw", diff --git a/drivers/media/video/cx23885/cx23885.h b/drivers/media/video/cx23885/cx23885.h index c3478b2..64827fb 100644 --- a/drivers/media/video/cx23885/cx23885.h +++ b/drivers/media/video/cx23885/cx23885.h @@ -410,6 +410,7 @@ extern struct cx23885_subid cx23885_subids[]; extern const unsigned int cx23885_idcount; extern int cx23885_xc5000_tuner_callback(void *priv, int command, int arg); +extern int cx23885_xc3028_tuner_callback(void *priv, int command, int arg); extern void cx23885_card_list(struct cx23885_dev *dev); extern int cx23885_ir_init(struct cx23885_dev *dev); extern void cx23885_gpio_setup(struct cx23885_dev *dev); -- cgit v0.10.2 From aef2d186e381816733fa15d67ad63bd99254cb9e Mon Sep 17 00:00:00 2001 From: Steven Toth Date: Mon, 4 Aug 2008 21:39:53 -0300 Subject: V4L/DVB (8644): Add support for DViCO FusionHDTV DVB-T Dual Express Add support for the DViCO FusionHDTV DVB-T Dual Express card, based on work by Chris Pascoe and Stephen Backway. Signed-off-by: Steven Toth Signed-off-by: Anton Blanchard Signed-off-by: Mauro Carvalho Chehab diff --git a/Documentation/video4linux/CARDLIST.cx23885 b/Documentation/video4linux/CARDLIST.cx23885 index f0e613b..bccafd3 100644 --- a/Documentation/video4linux/CARDLIST.cx23885 +++ b/Documentation/video4linux/CARDLIST.cx23885 @@ -9,3 +9,4 @@ 8 -> Hauppauge WinTV-HVR1700 [0070:8101] 9 -> Hauppauge WinTV-HVR1400 [0070:8010] 10 -> DViCO FusionHDTV7 Dual Express [18ac:d618] + 11 -> DViCO FusionHDTV DVB-T Dual Express [18ac:db78] diff --git a/drivers/media/video/cx23885/cx23885-cards.c b/drivers/media/video/cx23885/cx23885-cards.c index 93ad7f8..7caa246 100644 --- a/drivers/media/video/cx23885/cx23885-cards.c +++ b/drivers/media/video/cx23885/cx23885-cards.c @@ -149,6 +149,11 @@ struct cx23885_board cx23885_boards[] = { .portb = CX23885_MPEG_DVB, .portc = CX23885_MPEG_DVB, }, + [CX23885_BOARD_DVICO_FUSIONHDTV_DVB_T_DUAL_EXP] = { + .name = "DViCO FusionHDTV DVB-T Dual Express", + .portb = CX23885_MPEG_DVB, + .portc = CX23885_MPEG_DVB, + }, }; const unsigned int cx23885_bcount = ARRAY_SIZE(cx23885_boards); @@ -220,6 +225,10 @@ struct cx23885_subid cx23885_subids[] = { .subvendor = 0x18ac, .subdevice = 0xd618, .card = CX23885_BOARD_DVICO_FUSIONHDTV_7_DUAL_EXP, + },{ + .subvendor = 0x18ac, + .subdevice = 0xdb78, + .card = CX23885_BOARD_DVICO_FUSIONHDTV_DVB_T_DUAL_EXP, }, }; const unsigned int cx23885_idcount = ARRAY_SIZE(cx23885_subids); @@ -340,6 +349,7 @@ static int cx23885_tuner_callback(struct cx23885_dev *dev, int port, bitmask = 0x04; break; case CX23885_BOARD_DVICO_FUSIONHDTV_7_DUAL_EXP: + case CX23885_BOARD_DVICO_FUSIONHDTV_DVB_T_DUAL_EXP: if (command == 0) { /* Two identical tuners on two different i2c buses, @@ -483,6 +493,19 @@ void cx23885_gpio_setup(struct cx23885_dev *dev) mdelay(20); cx_set(GP0_IO, 0x000f000f); break; + case CX23885_BOARD_DVICO_FUSIONHDTV_DVB_T_DUAL_EXP: + /* GPIO-0 portb xc3028 reset */ + /* GPIO-1 portb zl10353 reset */ + /* GPIO-2 portc xc3028 reset */ + /* GPIO-3 portc zl10353 reset */ + + /* Put the parts into reset and back */ + cx_set(GP0_IO, 0x000f0000); + mdelay(20); + cx_clear(GP0_IO, 0x0000000f); + mdelay(20); + cx_set(GP0_IO, 0x000f000f); + break; } } @@ -534,6 +557,7 @@ void cx23885_card_setup(struct cx23885_dev *dev) switch (dev->board) { case CX23885_BOARD_DVICO_FUSIONHDTV_7_DUAL_EXP: + case CX23885_BOARD_DVICO_FUSIONHDTV_DVB_T_DUAL_EXP: ts2->gen_ctrl_val = 0xc; /* Serial bus + punctured clock */ ts2->ts_clk_en_val = 0x1; /* Enable TS_CLK */ ts2->src_sel_val = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO; diff --git a/drivers/media/video/cx23885/cx23885-dvb.c b/drivers/media/video/cx23885/cx23885-dvb.c index 4567005..dbbbf5b 100644 --- a/drivers/media/video/cx23885/cx23885-dvb.c +++ b/drivers/media/video/cx23885/cx23885-dvb.c @@ -42,6 +42,7 @@ #include "tuner-simple.h" #include "dib7000p.h" #include "dibx000_common.h" +#include "zl10353.h" static unsigned int debug; @@ -303,6 +304,12 @@ static struct dib7000p_config hauppauge_hvr1400_dib7000_config = { .output_mode = OUTMODE_MPEG2_SERIAL, }; +static struct zl10353_config dvico_fusionhdtv_xc3028 = { + .demod_address = 0x0f, + .if2 = 45600, + .no_tuner = 1, +}; + static int dvb_register(struct cx23885_tsport *port) { struct cx23885_dev *dev = port->dev; @@ -465,6 +472,33 @@ static int dvb_register(struct cx23885_tsport *port) &i2c_bus->i2c_adap, &dvico_xc5000_tunerconfig, i2c_bus); break; + case CX23885_BOARD_DVICO_FUSIONHDTV_DVB_T_DUAL_EXP: { + i2c_bus = &dev->i2c_bus[port->nr - 1]; + + port->dvb.frontend = dvb_attach(zl10353_attach, + &dvico_fusionhdtv_xc3028, + &i2c_bus->i2c_adap); + if (port->dvb.frontend != NULL) { + struct dvb_frontend *fe; + struct xc2028_config cfg = { + .i2c_adap = &i2c_bus->i2c_adap, + .i2c_addr = 0x61, + .video_dev = port, + .callback = cx23885_xc3028_tuner_callback, + }; + static struct xc2028_ctrl ctl = { + .fname = "xc3028-v27.fw", + .max_len = 64, + .demod = XC3028_FE_ZARLINK456, + }; + + fe = dvb_attach(xc2028_attach, port->dvb.frontend, + &cfg); + if (fe != NULL && fe->ops.tuner_ops.set_config != NULL) + fe->ops.tuner_ops.set_config(fe, &ctl); + } + break; + } default: printk("%s: The frontend of your DVB/ATSC card isn't supported yet\n", dev->name); diff --git a/drivers/media/video/cx23885/cx23885.h b/drivers/media/video/cx23885/cx23885.h index 64827fb..08b4c13 100644 --- a/drivers/media/video/cx23885/cx23885.h +++ b/drivers/media/video/cx23885/cx23885.h @@ -64,6 +64,7 @@ #define CX23885_BOARD_HAUPPAUGE_HVR1700 8 #define CX23885_BOARD_HAUPPAUGE_HVR1400 9 #define CX23885_BOARD_DVICO_FUSIONHDTV_7_DUAL_EXP 10 +#define CX23885_BOARD_DVICO_FUSIONHDTV_DVB_T_DUAL_EXP 11 /* Currently unsupported by the driver: PAL/H, NTSC/Kr, SECAM B/G/H/LC */ #define CX23885_NORMS (\ -- cgit v0.10.2 From 12886871ae7a6f4e2b1ea371f6604d8239dda724 Mon Sep 17 00:00:00 2001 From: Steven Toth Date: Mon, 4 Aug 2008 21:41:06 -0300 Subject: V4L/DVB (8645): Support IR remote on FusionHDTV DVB-T Dual Express From Chris Pascoe Support IR remote on FusionHDTV DVB-T Dual Express Signed-off-by: Steven Toth Signed-off-by: Anton Blanchard Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/cx23885/cx23885-cards.c b/drivers/media/video/cx23885/cx23885-cards.c index 7caa246..46d7026 100644 --- a/drivers/media/video/cx23885/cx23885-cards.c +++ b/drivers/media/video/cx23885/cx23885-cards.c @@ -520,6 +520,9 @@ int cx23885_ir_init(struct cx23885_dev *dev) case CX23885_BOARD_HAUPPAUGE_HVR1400: /* FIXME: Implement me */ break; + case CX23885_BOARD_DVICO_FUSIONHDTV_DVB_T_DUAL_EXP: + request_module("ir-kbd-i2c"); + break; } return 0; -- cgit v0.10.2 From 89ce2216e338f62c411bea12df37a2f54f2ce13a Mon Sep 17 00:00:00 2001 From: Steven Toth Date: Mon, 4 Aug 2008 22:18:19 -0300 Subject: V4L/DVB (8646): cx23885: Convert framework to use a single tuner callback function. Code reduction. Tuner callback now assumes that tsport is passed as the void arg. Signed-off-by: Steven Toth Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/cx23885/cx23885-cards.c b/drivers/media/video/cx23885/cx23885-cards.c index 46d7026..0daffc3 100644 --- a/drivers/media/video/cx23885/cx23885-cards.c +++ b/drivers/media/video/cx23885/cx23885-cards.c @@ -329,11 +329,15 @@ static void hauppauge_eeprom(struct cx23885_dev *dev, u8 *eeprom_data) dev->name, tv.model); } -static int cx23885_tuner_callback(struct cx23885_dev *dev, int port, - int command, int arg) +int cx23885_tuner_callback(void *priv, int command, int arg) { + struct cx23885_tsport *port = priv; + struct cx23885_dev *dev = port->dev; u32 bitmask = 0; + if (command == XC2028_RESET_CLK) + return 0; + if (command != 0) { printk(KERN_ERR "%s(): Unknown command 0x%x.\n", __func__, command); @@ -354,9 +358,9 @@ static int cx23885_tuner_callback(struct cx23885_dev *dev, int port, /* Two identical tuners on two different i2c buses, * we need to reset the correct gpio. */ - if (port == 0) + if (port->nr == 0) bitmask = 0x01; - else if (port == 1) + else if (port->nr == 1) bitmask = 0x04; } break; @@ -372,25 +376,6 @@ static int cx23885_tuner_callback(struct cx23885_dev *dev, int port, return 0; } -int cx23885_xc5000_tuner_callback(void *priv, int command, int arg) -{ - struct cx23885_i2c *bus = priv; - struct cx23885_dev *dev = bus->dev; - - return cx23885_tuner_callback(dev, bus->nr, command, arg); -} - -int cx23885_xc3028_tuner_callback(void *priv, int command, int arg) -{ - struct cx23885_tsport *port = priv; - struct cx23885_dev *dev = port->dev; - - if (command == XC2028_RESET_CLK) - return 0; - - return cx23885_tuner_callback(dev, port->nr, command, arg); -} - void cx23885_gpio_setup(struct cx23885_dev *dev) { switch(dev->board) { diff --git a/drivers/media/video/cx23885/cx23885-dvb.c b/drivers/media/video/cx23885/cx23885-dvb.c index dbbbf5b..f8564bb 100644 --- a/drivers/media/video/cx23885/cx23885-dvb.c +++ b/drivers/media/video/cx23885/cx23885-dvb.c @@ -189,13 +189,13 @@ static struct s5h1411_config dvico_s5h1411_config = { static struct xc5000_config hauppauge_hvr1500q_tunerconfig = { .i2c_address = 0x61, .if_khz = 5380, - .tuner_callback = cx23885_xc5000_tuner_callback, + .tuner_callback = cx23885_tuner_callback, }; static struct xc5000_config dvico_xc5000_tunerconfig = { .i2c_address = 0x64, .if_khz = 5380, - .tuner_callback = cx23885_xc5000_tuner_callback, + .tuner_callback = cx23885_tuner_callback, }; static struct tda829x_config tda829x_no_probe = { @@ -391,7 +391,7 @@ static int dvb_register(struct cx23885_tsport *port) if (port->dvb.frontend != NULL) dvb_attach(xc5000_attach, port->dvb.frontend, &i2c_bus->i2c_adap, - &hauppauge_hvr1500q_tunerconfig, i2c_bus); + &hauppauge_hvr1500q_tunerconfig, port); break; case CX23885_BOARD_HAUPPAUGE_HVR1500: i2c_bus = &dev->i2c_bus[1]; @@ -403,7 +403,8 @@ static int dvb_register(struct cx23885_tsport *port) struct xc2028_config cfg = { .i2c_adap = &i2c_bus->i2c_adap, .i2c_addr = 0x61, - .callback = cx23885_xc3028_tuner_callback, + .video_dev = port, + .callback = cx23885_tuner_callback, }; static struct xc2028_ctrl ctl = { .fname = "xc3028-v27.fw", @@ -442,7 +443,8 @@ static int dvb_register(struct cx23885_tsport *port) struct xc2028_config cfg = { .i2c_adap = &dev->i2c_bus[1].i2c_adap, .i2c_addr = 0x64, - .callback = cx23885_xc3028_tuner_callback, + .video_dev = port, + .callback = cx23885_tuner_callback, }; static struct xc2028_ctrl ctl = { .fname = "xc3028L-v36.fw", @@ -470,7 +472,7 @@ static int dvb_register(struct cx23885_tsport *port) if (port->dvb.frontend != NULL) dvb_attach(xc5000_attach, port->dvb.frontend, &i2c_bus->i2c_adap, - &dvico_xc5000_tunerconfig, i2c_bus); + &dvico_xc5000_tunerconfig, port); break; case CX23885_BOARD_DVICO_FUSIONHDTV_DVB_T_DUAL_EXP: { i2c_bus = &dev->i2c_bus[port->nr - 1]; @@ -484,7 +486,7 @@ static int dvb_register(struct cx23885_tsport *port) .i2c_adap = &i2c_bus->i2c_adap, .i2c_addr = 0x61, .video_dev = port, - .callback = cx23885_xc3028_tuner_callback, + .callback = cx23885_tuner_callback, }; static struct xc2028_ctrl ctl = { .fname = "xc3028-v27.fw", diff --git a/drivers/media/video/cx23885/cx23885.h b/drivers/media/video/cx23885/cx23885.h index 08b4c13..db52d81 100644 --- a/drivers/media/video/cx23885/cx23885.h +++ b/drivers/media/video/cx23885/cx23885.h @@ -410,8 +410,7 @@ extern const unsigned int cx23885_bcount; extern struct cx23885_subid cx23885_subids[]; extern const unsigned int cx23885_idcount; -extern int cx23885_xc5000_tuner_callback(void *priv, int command, int arg); -extern int cx23885_xc3028_tuner_callback(void *priv, int command, int arg); +extern int cx23885_tuner_callback(void *priv, int command, int arg); extern void cx23885_card_list(struct cx23885_dev *dev); extern int cx23885_ir_init(struct cx23885_dev *dev); extern void cx23885_gpio_setup(struct cx23885_dev *dev); -- cgit v0.10.2 From f723af16da8359cda47320001960609b0086082b Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Sat, 9 Aug 2008 10:35:29 -0300 Subject: V4L/DVB (8649): v4l2: add AAC bitrate control If you can select AAC as audio encoder, then you should also be able to set the bitrate. Add this missing control. Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/v4l2-common.c b/drivers/media/video/v4l2-common.c index 0c51183..20c3be8 100644 --- a/drivers/media/video/v4l2-common.c +++ b/drivers/media/video/v4l2-common.c @@ -386,6 +386,7 @@ const char *v4l2_ctrl_get_name(u32 id) case V4L2_CID_MPEG_AUDIO_L1_BITRATE: return "Audio Layer I Bitrate"; case V4L2_CID_MPEG_AUDIO_L2_BITRATE: return "Audio Layer II Bitrate"; case V4L2_CID_MPEG_AUDIO_L3_BITRATE: return "Audio Layer III Bitrate"; + case V4L2_CID_MPEG_AUDIO_AAC_BITRATE: return "Audio AAC Bitrate"; case V4L2_CID_MPEG_AUDIO_AC3_BITRATE: return "Audio AC-3 Bitrate"; case V4L2_CID_MPEG_AUDIO_MODE: return "Audio Stereo Mode"; case V4L2_CID_MPEG_AUDIO_MODE_EXTENSION: return "Audio Stereo Mode Extension"; @@ -548,6 +549,8 @@ int v4l2_ctrl_query_fill_std(struct v4l2_queryctrl *qctrl) V4L2_MPEG_AUDIO_L3_BITRATE_32K, V4L2_MPEG_AUDIO_L3_BITRATE_320K, 1, V4L2_MPEG_AUDIO_L3_BITRATE_192K); + case V4L2_CID_MPEG_AUDIO_AAC_BITRATE: + return v4l2_ctrl_query_fill(qctrl, 0, 6400, 1, 3200000); case V4L2_CID_MPEG_AUDIO_AC3_BITRATE: return v4l2_ctrl_query_fill(qctrl, V4L2_MPEG_AUDIO_AC3_BITRATE_32K, diff --git a/include/linux/videodev2.h b/include/linux/videodev2.h index 9054764..d4b0303 100644 --- a/include/linux/videodev2.h +++ b/include/linux/videodev2.h @@ -990,7 +990,8 @@ enum v4l2_mpeg_audio_crc { V4L2_MPEG_AUDIO_CRC_CRC16 = 1, }; #define V4L2_CID_MPEG_AUDIO_MUTE (V4L2_CID_MPEG_BASE+109) -#define V4L2_CID_MPEG_AUDIO_AC3_BITRATE (V4L2_CID_MPEG_BASE+110) +#define V4L2_CID_MPEG_AUDIO_AAC_BITRATE (V4L2_CID_MPEG_BASE+110) +#define V4L2_CID_MPEG_AUDIO_AC3_BITRATE (V4L2_CID_MPEG_BASE+111) enum v4l2_mpeg_audio_ac3_bitrate { V4L2_MPEG_AUDIO_AC3_BITRATE_32K = 0, V4L2_MPEG_AUDIO_AC3_BITRATE_40K = 1, -- cgit v0.10.2 From 8d79898897f8afee182febef18b96f559d32ebc4 Mon Sep 17 00:00:00 2001 From: Anton Blanchard Date: Sat, 9 Aug 2008 12:23:15 -0300 Subject: V4L/DVB (8654): cxusb: add support for DViCO FusionHDTV DVB-T Dual Digital 4 (rev 2) Add support for revision 2 of the DViCO FusionHDTV DVB-T Dual Digital 4 which has new tuners and demodulators (2 x DIB7070p). With this patch both DVB reception and IR works. The dib7000p driver currently hardwires the output mode to OUTMODE_MPEG2_SERIAL regardless of what we ask for. Modify it to allow OUTMODE_MPEG2_PAR_GATED_CLK to be set. Longer term we should remove the check completely and set the output mode correctly in all the callers. Add Kconfig bits to ensure the dib7000p and dib0070 modules are enabled. It would be nice to only do this for the !DVB_FE_CUSTOMISE case, but this is what the other DIB7070 module does (there are a number of module dependencies in the attach code). Signed-off-by: Anton Blanchard Signed-off-by: Michael Krufky Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/dvb/dvb-usb/Kconfig b/drivers/media/dvb/dvb-usb/Kconfig index e84152b..df99323 100644 --- a/drivers/media/dvb/dvb-usb/Kconfig +++ b/drivers/media/dvb/dvb-usb/Kconfig @@ -108,6 +108,8 @@ config DVB_USB_CXUSB select MEDIA_TUNER_SIMPLE if !DVB_FE_CUSTOMISE select MEDIA_TUNER_XC2028 if !DVB_FE_CUSTOMISE select MEDIA_TUNER_MXL5005S if !DVB_FE_CUSTOMISE + select DVB_DIB7000P + select DVB_TUNER_DIB0070 help Say Y here to support the Conexant USB2.0 hybrid reference design. Currently, only DVB and ATSC modes are supported, analog mode diff --git a/drivers/media/dvb/dvb-usb/cxusb.c b/drivers/media/dvb/dvb-usb/cxusb.c index 5634002..1de3678 100644 --- a/drivers/media/dvb/dvb-usb/cxusb.c +++ b/drivers/media/dvb/dvb-usb/cxusb.c @@ -36,6 +36,8 @@ #include "tuner-xc2028.h" #include "tuner-simple.h" #include "mxl5005s.h" +#include "dib7000p.h" +#include "dib0070.h" /* debug */ static int dvb_usb_cxusb_debug; @@ -726,6 +728,157 @@ no_IR: return 0; } +static struct dibx000_agc_config dib7070_agc_config = { + .band_caps = BAND_UHF | BAND_VHF | BAND_LBAND | BAND_SBAND, + + /* + * P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0, P_agc_freq_pwm_div=5, + * P_agc_inv_pwm1=0, P_agc_inv_pwm2=0, P_agc_inh_dc_rv_est=0, + * P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=5, P_agc_write=0 + */ + .setup = (0 << 15) | (0 << 14) | (5 << 11) | (0 << 10) | (0 << 9) | + (0 << 8) | (3 << 5) | (0 << 4) | (5 << 1) | (0 << 0), + .inv_gain = 600, + .time_stabiliz = 10, + .alpha_level = 0, + .thlock = 118, + .wbd_inv = 0, + .wbd_ref = 3530, + .wbd_sel = 1, + .wbd_alpha = 5, + .agc1_max = 65535, + .agc1_min = 0, + .agc2_max = 65535, + .agc2_min = 0, + .agc1_pt1 = 0, + .agc1_pt2 = 40, + .agc1_pt3 = 183, + .agc1_slope1 = 206, + .agc1_slope2 = 255, + .agc2_pt1 = 72, + .agc2_pt2 = 152, + .agc2_slope1 = 88, + .agc2_slope2 = 90, + .alpha_mant = 17, + .alpha_exp = 27, + .beta_mant = 23, + .beta_exp = 51, + .perform_agc_softsplit = 0, +}; + +static struct dibx000_bandwidth_config dib7070_bw_config_12_mhz = { + .internal = 60000, + .sampling = 15000, + .pll_prediv = 1, + .pll_ratio = 20, + .pll_range = 3, + .pll_reset = 1, + .pll_bypass = 0, + .enable_refdiv = 0, + .bypclk_div = 0, + .IO_CLK_en_core = 1, + .ADClkSrc = 1, + .modulo = 2, + /* refsel, sel, freq_15k */ + .sad_cfg = (3 << 14) | (1 << 12) | (524 << 0), + .ifreq = (0 << 25) | 0, + .timf = 20452225, + .xtal_hz = 12000000, +}; + +static struct dib7000p_config cxusb_dualdig4_rev2_config = { + .output_mode = OUTMODE_MPEG2_PAR_GATED_CLK, + .output_mpeg2_in_188_bytes = 1, + + .agc_config_count = 1, + .agc = &dib7070_agc_config, + .bw = &dib7070_bw_config_12_mhz, + .tuner_is_baseband = 1, + .spur_protect = 1, + + .gpio_dir = 0xfcef, + .gpio_val = 0x0110, + + .gpio_pwm_pos = DIB7000P_GPIO_DEFAULT_PWM_POS, + + .hostbus_diversity = 1, +}; + +static int cxusb_dualdig4_rev2_frontend_attach(struct dvb_usb_adapter *adap) +{ + if (usb_set_interface(adap->dev->udev, 0, 1) < 0) + err("set interface failed"); + + cxusb_ctrl_msg(adap->dev, CMD_DIGITAL, NULL, 0, NULL, 0); + + cxusb_bluebird_gpio_pulse(adap->dev, 0x02, 1); + + dib7000p_i2c_enumeration(&adap->dev->i2c_adap, 1, 18, + &cxusb_dualdig4_rev2_config); + + if ((adap->fe = dvb_attach(dib7000p_attach, + &adap->dev->i2c_adap, 0x80, + &cxusb_dualdig4_rev2_config)) == NULL) + return -EIO; + + return 0; +} + +static int dib7070_tuner_reset(struct dvb_frontend *fe, int onoff) +{ + return dib7000p_set_gpio(fe, 8, 0, !onoff); +} + +static int dib7070_tuner_sleep(struct dvb_frontend *fe, int onoff) +{ + return 0; +} + +static struct dib0070_config dib7070p_dib0070_config = { + .i2c_address = DEFAULT_DIB0070_I2C_ADDRESS, + .reset = dib7070_tuner_reset, + .sleep = dib7070_tuner_sleep, + .clock_khz = 12000, +}; + +struct dib0700_adapter_state { + int (*set_param_save) (struct dvb_frontend *, + struct dvb_frontend_parameters *); +}; + +static int dib7070_set_param_override(struct dvb_frontend *fe, + struct dvb_frontend_parameters *fep) +{ + struct dvb_usb_adapter *adap = fe->dvb->priv; + struct dib0700_adapter_state *state = adap->priv; + + u16 offset; + u8 band = BAND_OF_FREQUENCY(fep->frequency/1000); + switch (band) { + case BAND_VHF: offset = 950; break; + case BAND_UHF: + default: offset = 550; break; + } + + dib7000p_set_wbd_ref(fe, offset + dib0070_wbd_offset(fe)); + + return state->set_param_save(fe, fep); +} + +static int cxusb_dualdig4_rev2_tuner_attach(struct dvb_usb_adapter *adap) +{ + struct dib0700_adapter_state *st = adap->priv; + struct i2c_adapter *tun_i2c = dib7000p_get_i2c_master(adap->fe, DIBX000_I2C_INTERFACE_TUNER, 1); + + if (dvb_attach(dib0070_attach, adap->fe, tun_i2c, + &dib7070p_dib0070_config) == NULL) + return -ENODEV; + + st->set_param_save = adap->fe->ops.tuner_ops.set_params; + adap->fe->ops.tuner_ops.set_params = dib7070_set_param_override; + return 0; +} + static int cxusb_nano2_frontend_attach(struct dvb_usb_adapter *adap) { if (usb_set_interface(adap->dev->udev, 0, 1) < 0) @@ -826,6 +979,7 @@ static struct dvb_usb_device_properties cxusb_bluebird_dee1601_properties; static struct dvb_usb_device_properties cxusb_bluebird_lgz201_properties; static struct dvb_usb_device_properties cxusb_bluebird_dtt7579_properties; static struct dvb_usb_device_properties cxusb_bluebird_dualdig4_properties; +static struct dvb_usb_device_properties cxusb_bluebird_dualdig4_rev2_properties; static struct dvb_usb_device_properties cxusb_bluebird_nano2_properties; static struct dvb_usb_device_properties cxusb_bluebird_nano2_needsfirmware_properties; static struct dvb_usb_device_properties cxusb_aver_a868r_properties; @@ -852,6 +1006,9 @@ static int cxusb_probe(struct usb_interface *intf, THIS_MODULE, NULL, adapter_nr) || 0 == dvb_usb_device_init(intf, &cxusb_aver_a868r_properties, THIS_MODULE, NULL, adapter_nr) || + 0 == dvb_usb_device_init(intf, + &cxusb_bluebird_dualdig4_rev2_properties, + THIS_MODULE, NULL, adapter_nr) || 0) return 0; @@ -876,6 +1033,7 @@ static struct usb_device_id cxusb_table [] = { { USB_DEVICE(USB_VID_DVICO, USB_PID_DVICO_BLUEBIRD_DVB_T_NANO_2) }, { USB_DEVICE(USB_VID_DVICO, USB_PID_DVICO_BLUEBIRD_DVB_T_NANO_2_NFW_WARM) }, { USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_VOLAR_A868R) }, + { USB_DEVICE(USB_VID_DVICO, USB_PID_DVICO_BLUEBIRD_DUAL_4_REV_2) }, {} /* Terminating entry */ }; MODULE_DEVICE_TABLE (usb, cxusb_table); @@ -1321,6 +1479,54 @@ static struct dvb_usb_device_properties cxusb_aver_a868r_properties = { } }; +static struct dvb_usb_device_properties cxusb_bluebird_dualdig4_rev2_properties = { + .caps = DVB_USB_IS_AN_I2C_ADAPTER, + + .usb_ctrl = CYPRESS_FX2, + + .size_of_priv = sizeof(struct cxusb_state), + + .num_adapters = 1, + .adapter = { + { + .streaming_ctrl = cxusb_streaming_ctrl, + .frontend_attach = cxusb_dualdig4_rev2_frontend_attach, + .tuner_attach = cxusb_dualdig4_rev2_tuner_attach, + .size_of_priv = sizeof(struct dib0700_adapter_state), + /* parameter for the MPEG2-data transfer */ + .stream = { + .type = USB_BULK, + .count = 7, + .endpoint = 0x02, + .u = { + .bulk = { + .buffersize = 4096, + } + } + }, + }, + }, + + .power_ctrl = cxusb_bluebird_power_ctrl, + + .i2c_algo = &cxusb_i2c_algo, + + .generic_bulk_ctrl_endpoint = 0x01, + + .rc_interval = 100, + .rc_key_map = dvico_mce_rc_keys, + .rc_key_map_size = ARRAY_SIZE(dvico_mce_rc_keys), + .rc_query = cxusb_rc_query, + + .num_device_descs = 1, + .devices = { + { "DViCO FusionHDTV DVB-T Dual Digital 4 (rev 2)", + { NULL }, + { &cxusb_table[17], NULL }, + }, + } +}; + static struct usb_driver cxusb_driver = { .name = "dvb_usb_cxusb", .probe = cxusb_probe, diff --git a/drivers/media/dvb/dvb-usb/dvb-usb-ids.h b/drivers/media/dvb/dvb-usb/dvb-usb-ids.h index 03dfb9f..f327a15 100644 --- a/drivers/media/dvb/dvb-usb/dvb-usb-ids.h +++ b/drivers/media/dvb/dvb-usb/dvb-usb-ids.h @@ -171,6 +171,7 @@ #define USB_PID_DVICO_BLUEBIRD_DUAL_2_COLD 0xdb58 #define USB_PID_DVICO_BLUEBIRD_DUAL_2_WARM 0xdb59 #define USB_PID_DVICO_BLUEBIRD_DUAL_4 0xdb78 +#define USB_PID_DVICO_BLUEBIRD_DUAL_4_REV_2 0xdb98 #define USB_PID_DVICO_BLUEBIRD_DVB_T_NANO_2 0xdb70 #define USB_PID_DVICO_BLUEBIRD_DVB_T_NANO_2_NFW_WARM 0xdb71 #define USB_PID_DIGITALNOW_BLUEBIRD_DUAL_1_COLD 0xdb54 diff --git a/drivers/media/dvb/frontends/dib7000p.c b/drivers/media/dvb/frontends/dib7000p.c index 1a0142e..8217e5b 100644 --- a/drivers/media/dvb/frontends/dib7000p.c +++ b/drivers/media/dvb/frontends/dib7000p.c @@ -1333,7 +1333,8 @@ struct dvb_frontend * dib7000p_attach(struct i2c_adapter *i2c_adap, u8 i2c_addr, /* Ensure the output mode remains at the previous default if it's * not specifically set by the caller. */ - if (st->cfg.output_mode != OUTMODE_MPEG2_SERIAL) + if ((st->cfg.output_mode != OUTMODE_MPEG2_SERIAL) && + (st->cfg.output_mode != OUTMODE_MPEG2_PAR_GATED_CLK)) st->cfg.output_mode = OUTMODE_MPEG2_FIFO; demod = &st->demod; -- cgit v0.10.2 From a2dc86b69dcbcbeb498c5f5169f09f4bd207de5f Mon Sep 17 00:00:00 2001 From: Michael Krufky Date: Sat, 9 Aug 2008 13:06:26 -0300 Subject: V4L/DVB (8655): cxusb: fix checkpatch warnings & errors Fix the following checkpatch.pl errors and warnings: ERROR: do not use assignment in if condition 117: FILE: linux/drivers/media/dvb/dvb-usb/cxusb.c:819: + if ((adap->fe = dvb_attach(dib7000p_attach, ERROR: switch and case should be at the same indent 155: FILE: linux/drivers/media/dvb/dvb-usb/cxusb.c:857: + switch (band) { + case BAND_VHF: offset = 950; break; + case BAND_UHF: + default: offset = 550; break; WARNING: line over 80 characters 169: FILE: linux/drivers/media/dvb/dvb-usb/cxusb.c:871: + struct i2c_adapter *tun_i2c = dib7000p_get_i2c_master(adap->fe, DIBX000_I2C_INTERFACE_TUNER, 1); WARNING: line over 80 characters 213: FILE: linux/drivers/media/dvb/dvb-usb/cxusb.c:1342: +static struct dvb_usb_device_properties cxusb_bluebird_dualdig4_rev2_properties = { WARNING: line over 80 characters 226: FILE: linux/drivers/media/dvb/dvb-usb/cxusb.c:1355: + .size_of_priv = sizeof(struct dib0700_adapter_state), total: 2 errors, 3 warnings, 266 lines checked Signed-off-by: Michael Krufky Cc: Anton Blanchard Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/dvb/dvb-usb/cxusb.c b/drivers/media/dvb/dvb-usb/cxusb.c index 1de3678..338c819 100644 --- a/drivers/media/dvb/dvb-usb/cxusb.c +++ b/drivers/media/dvb/dvb-usb/cxusb.c @@ -816,9 +816,9 @@ static int cxusb_dualdig4_rev2_frontend_attach(struct dvb_usb_adapter *adap) dib7000p_i2c_enumeration(&adap->dev->i2c_adap, 1, 18, &cxusb_dualdig4_rev2_config); - if ((adap->fe = dvb_attach(dib7000p_attach, - &adap->dev->i2c_adap, 0x80, - &cxusb_dualdig4_rev2_config)) == NULL) + adap->fe = dvb_attach(dib7000p_attach, &adap->dev->i2c_adap, 0x80, + &cxusb_dualdig4_rev2_config); + if (adap->fe == NULL) return -EIO; return 0; @@ -855,9 +855,9 @@ static int dib7070_set_param_override(struct dvb_frontend *fe, u16 offset; u8 band = BAND_OF_FREQUENCY(fep->frequency/1000); switch (band) { - case BAND_VHF: offset = 950; break; - case BAND_UHF: - default: offset = 550; break; + case BAND_VHF: offset = 950; break; + default: + case BAND_UHF: offset = 550; break; } dib7000p_set_wbd_ref(fe, offset + dib0070_wbd_offset(fe)); @@ -868,7 +868,9 @@ static int dib7070_set_param_override(struct dvb_frontend *fe, static int cxusb_dualdig4_rev2_tuner_attach(struct dvb_usb_adapter *adap) { struct dib0700_adapter_state *st = adap->priv; - struct i2c_adapter *tun_i2c = dib7000p_get_i2c_master(adap->fe, DIBX000_I2C_INTERFACE_TUNER, 1); + struct i2c_adapter *tun_i2c = + dib7000p_get_i2c_master(adap->fe, + DIBX000_I2C_INTERFACE_TUNER, 1); if (dvb_attach(dib0070_attach, adap->fe, tun_i2c, &dib7070p_dib0070_config) == NULL) @@ -1479,7 +1481,8 @@ static struct dvb_usb_device_properties cxusb_aver_a868r_properties = { } }; -static struct dvb_usb_device_properties cxusb_bluebird_dualdig4_rev2_properties = { +static +struct dvb_usb_device_properties cxusb_bluebird_dualdig4_rev2_properties = { .caps = DVB_USB_IS_AN_I2C_ADAPTER, .usb_ctrl = CYPRESS_FX2, @@ -1489,10 +1492,10 @@ static struct dvb_usb_device_properties cxusb_bluebird_dualdig4_rev2_properties .num_adapters = 1, .adapter = { { - .streaming_ctrl = cxusb_streaming_ctrl, - .frontend_attach = cxusb_dualdig4_rev2_frontend_attach, - .tuner_attach = cxusb_dualdig4_rev2_tuner_attach, - .size_of_priv = sizeof(struct dib0700_adapter_state), + .streaming_ctrl = cxusb_streaming_ctrl, + .frontend_attach = cxusb_dualdig4_rev2_frontend_attach, + .tuner_attach = cxusb_dualdig4_rev2_tuner_attach, + .size_of_priv = sizeof(struct dib0700_adapter_state), /* parameter for the MPEG2-data transfer */ .stream = { .type = USB_BULK, -- cgit v0.10.2 From 2e06d2ff548fc6333f5b34d188646ded327187c3 Mon Sep 17 00:00:00 2001 From: Michael Krufky Date: Sat, 9 Aug 2008 14:21:58 -0300 Subject: V4L/DVB (8656): fix DVB_FE_CUSTOMISE for DVB_DIB7000P and DVB_TUNER_DIB0070 with dvb-usb-cxusb Allow dvb-usb-cxusb to be built without dib7000p or dib0070 selected Signed-off-by: Michael Krufky Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/dvb/dvb-usb/Kconfig b/drivers/media/dvb/dvb-usb/Kconfig index df99323..8a54cb4 100644 --- a/drivers/media/dvb/dvb-usb/Kconfig +++ b/drivers/media/dvb/dvb-usb/Kconfig @@ -108,8 +108,8 @@ config DVB_USB_CXUSB select MEDIA_TUNER_SIMPLE if !DVB_FE_CUSTOMISE select MEDIA_TUNER_XC2028 if !DVB_FE_CUSTOMISE select MEDIA_TUNER_MXL5005S if !DVB_FE_CUSTOMISE - select DVB_DIB7000P - select DVB_TUNER_DIB0070 + select DVB_DIB7000P if !DVB_FE_CUSTOMISE + select DVB_TUNER_DIB0070 if !DVB_FE_CUSTOMISE help Say Y here to support the Conexant USB2.0 hybrid reference design. Currently, only DVB and ATSC modes are supported, analog mode diff --git a/drivers/media/dvb/frontends/dib0070.h b/drivers/media/dvb/frontends/dib0070.h index 3eedfdf..21f2c51 100644 --- a/drivers/media/dvb/frontends/dib0070.h +++ b/drivers/media/dvb/frontends/dib0070.h @@ -41,6 +41,7 @@ struct dib0070_config { extern struct dvb_frontend *dib0070_attach(struct dvb_frontend *fe, struct i2c_adapter *i2c, struct dib0070_config *cfg); +extern u16 dib0070_wbd_offset(struct dvb_frontend *); #else static inline struct dvb_frontend *dib0070_attach(struct dvb_frontend *fe, struct i2c_adapter *i2c, @@ -49,9 +50,14 @@ static inline struct dvb_frontend *dib0070_attach(struct dvb_frontend *fe, printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); return NULL; } + +static inline u16 dib0070_wbd_offset(struct dvb_frontend *fe) +{ + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); + return -ENODEV; +} #endif extern void dib0070_ctrl_agc_filter(struct dvb_frontend *, uint8_t open); -extern u16 dib0070_wbd_offset(struct dvb_frontend *); #endif diff --git a/drivers/media/dvb/frontends/dib7000p.h b/drivers/media/dvb/frontends/dib7000p.h index 07c4d12..3e81268 100644 --- a/drivers/media/dvb/frontends/dib7000p.h +++ b/drivers/media/dvb/frontends/dib7000p.h @@ -41,6 +41,14 @@ struct dib7000p_config { extern struct dvb_frontend *dib7000p_attach(struct i2c_adapter *i2c_adap, u8 i2c_addr, struct dib7000p_config *cfg); +extern struct i2c_adapter *dib7000p_get_i2c_master(struct dvb_frontend *, + enum dibx000_i2c_interface, + int); +extern int dib7000p_i2c_enumeration(struct i2c_adapter *i2c, + int no_of_demods, u8 default_addr, + struct dib7000p_config cfg[]); +extern int dib7000p_set_gpio(struct dvb_frontend *, u8 num, u8 dir, u8 val); +extern int dib7000p_set_wbd_ref(struct dvb_frontend *, u16 value); #else static inline struct dvb_frontend *dib7000p_attach(struct i2c_adapter *i2c_adap, u8 i2c_addr, @@ -49,13 +57,36 @@ static inline struct dvb_frontend *dib7000p_attach(struct i2c_adapter *i2c_adap, printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); return NULL; } -#endif -extern int dib7000p_i2c_enumeration(struct i2c_adapter *i2c, int no_of_demods, u8 default_addr, struct dib7000p_config cfg[]); +static inline +struct i2c_adapter *dib7000p_get_i2c_master(struct dvb_frontend *fe, + enum dibx000_i2c_interface i, int x) +{ + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); + return NULL; +} + +extern int dib7000p_i2c_enumeration(struct i2c_adapter *i2c, + int no_of_demods, u8 default_addr, + struct dib7000p_config cfg[]) +{ + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); + return -ENODEV; +} + +extern int dib7000p_set_gpio(struct dvb_frontend *fe, u8 num, u8 dir, u8 val) +{ + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); + return -ENODEV; +} + +extern int dib7000p_set_wbd_ref(struct dvb_frontend *fe, u16 value) +{ + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); + return -ENODEV; +} +#endif -extern struct i2c_adapter * dib7000p_get_i2c_master(struct dvb_frontend *, enum dibx000_i2c_interface, int); extern int dib7000pc_detection(struct i2c_adapter *i2c_adap); -extern int dib7000p_set_gpio(struct dvb_frontend *, u8 num, u8 dir, u8 val); -extern int dib7000p_set_wbd_ref(struct dvb_frontend *, u16 value); #endif -- cgit v0.10.2 From dfbdce04905d3196c828ca36f01ef06e6fdb2428 Mon Sep 17 00:00:00 2001 From: Timothy Lee Date: Sat, 9 Aug 2008 13:36:51 -0300 Subject: V4L/DVB (8657): cxusb: add lgs8gl5 and support for Magic-Pro DMB-TH usb stick Add support for Magic-Pro DMB-TH usb stick. DMB-TH is the HDTV broadcast standard used in Hong Kong and China. [...] I've also attached a second patch against the dvb-apps repository which adds a DMB-TH scan file for Hong Kong. Since the ProHDTV stick contains a DMB-TH decoder (lgs8gl5) onboard, it outputs MPEG-TS to the PC. Signed-off-by: Timothy Lee Signed-off-by: Michael Krufky Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/dvb/dvb-usb/cxusb.c b/drivers/media/dvb/dvb-usb/cxusb.c index 338c819..bffb443 100644 --- a/drivers/media/dvb/dvb-usb/cxusb.c +++ b/drivers/media/dvb/dvb-usb/cxusb.c @@ -38,6 +38,7 @@ #include "mxl5005s.h" #include "dib7000p.h" #include "dib0070.h" +#include "lgs8gl5.h" /* debug */ static int dvb_usb_cxusb_debug; @@ -111,6 +112,25 @@ static void cxusb_nano2_led(struct dvb_usb_device *d, int onoff) cxusb_bluebird_gpio_rw(d, 0x40, onoff ? 0 : 0x40); } +static int cxusb_d680_dmb_gpio_tuner(struct dvb_usb_device *d, + u8 addr, int onoff) +{ + u8 o[2] = {addr, onoff}; + u8 i; + int rc; + + rc = cxusb_ctrl_msg(d, CMD_GPIO_WRITE, o, 2, &i, 1); + + if (rc < 0) + return rc; + if (i == 0x01) + return 0; + else { + deb_info("gpio_write failed.\n"); + return -EIO; + } +} + /* I2C */ static int cxusb_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msg[], int num) @@ -264,6 +284,20 @@ static int cxusb_nano2_power_ctrl(struct dvb_usb_device *d, int onoff) return rc; } +static int cxusb_d680_dmb_power_ctrl(struct dvb_usb_device *d, int onoff) +{ + int ret; + u8 b; + ret = cxusb_power_ctrl(d, onoff); + if (!onoff) + return ret; + + msleep(128); + cxusb_ctrl_msg(d, CMD_DIGITAL, NULL, 0, &b, 1); + msleep(100); + return ret; +} + static int cxusb_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff) { u8 buf[2] = { 0x03, 0x00 }; @@ -285,6 +319,67 @@ static int cxusb_aver_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff) return 0; } +static void cxusb_d680_dmb_drain_message(struct dvb_usb_device *d) +{ + int ep = d->props.generic_bulk_ctrl_endpoint; + const int timeout = 100; + const int junk_len = 32; + u8 *junk; + int rd_count; + + /* Discard remaining data in video pipe */ + junk = kmalloc(junk_len, GFP_KERNEL); + if (!junk) + return; + while (1) { + if (usb_bulk_msg(d->udev, + usb_rcvbulkpipe(d->udev, ep), + junk, junk_len, &rd_count, timeout) < 0) + break; + if (!rd_count) + break; + } + kfree(junk); +} + +static void cxusb_d680_dmb_drain_video(struct dvb_usb_device *d) +{ + struct usb_data_stream_properties *p = &d->props.adapter[0].stream; + const int timeout = 100; + const int junk_len = p->u.bulk.buffersize; + u8 *junk; + int rd_count; + + /* Discard remaining data in video pipe */ + junk = kmalloc(junk_len, GFP_KERNEL); + if (!junk) + return; + while (1) { + if (usb_bulk_msg(d->udev, + usb_rcvbulkpipe(d->udev, p->endpoint), + junk, junk_len, &rd_count, timeout) < 0) + break; + if (!rd_count) + break; + } + kfree(junk); +} + +static int cxusb_d680_dmb_streaming_ctrl( + struct dvb_usb_adapter *adap, int onoff) +{ + if (onoff) { + u8 buf[2] = { 0x03, 0x00 }; + cxusb_d680_dmb_drain_video(adap->dev); + return cxusb_ctrl_msg(adap->dev, CMD_STREAMING_ON, + buf, sizeof(buf), NULL, 0); + } else { + int ret = cxusb_ctrl_msg(adap->dev, + CMD_STREAMING_OFF, NULL, 0, NULL, 0); + return ret; + } +} + static int cxusb_rc_query(struct dvb_usb_device *d, u32 *event, int *state) { struct dvb_usb_rc_key *keymap = d->props.rc_key_map; @@ -337,6 +432,32 @@ static int cxusb_bluebird2_rc_query(struct dvb_usb_device *d, u32 *event, return 0; } +static int cxusb_d680_dmb_rc_query(struct dvb_usb_device *d, u32 *event, + int *state) +{ + struct dvb_usb_rc_key *keymap = d->props.rc_key_map; + u8 ircode[2]; + int i; + + *event = 0; + *state = REMOTE_NO_KEY_PRESSED; + + if (cxusb_ctrl_msg(d, 0x10, NULL, 0, ircode, 2) < 0) + return 0; + + for (i = 0; i < d->props.rc_key_map_size; i++) { + if (keymap[i].custom == ircode[0] && + keymap[i].data == ircode[1]) { + *event = keymap[i].event; + *state = REMOTE_KEY_PRESSED; + + return 0; + } + } + + return 0; +} + static struct dvb_usb_rc_key dvico_mce_rc_keys[] = { { 0xfe, 0x02, KEY_TV }, { 0xfe, 0x0e, KEY_MP3 }, @@ -424,6 +545,44 @@ static struct dvb_usb_rc_key dvico_portable_rc_keys[] = { { 0xfc, 0x00, KEY_UNKNOWN }, /* HD */ }; +static struct dvb_usb_rc_key d680_dmb_rc_keys[] = { + { 0x00, 0x38, KEY_UNKNOWN }, /* TV/AV */ + { 0x08, 0x0c, KEY_ZOOM }, + { 0x08, 0x00, KEY_0 }, + { 0x00, 0x01, KEY_1 }, + { 0x08, 0x02, KEY_2 }, + { 0x00, 0x03, KEY_3 }, + { 0x08, 0x04, KEY_4 }, + { 0x00, 0x05, KEY_5 }, + { 0x08, 0x06, KEY_6 }, + { 0x00, 0x07, KEY_7 }, + { 0x08, 0x08, KEY_8 }, + { 0x00, 0x09, KEY_9 }, + { 0x00, 0x0a, KEY_MUTE }, + { 0x08, 0x29, KEY_BACK }, + { 0x00, 0x12, KEY_CHANNELUP }, + { 0x08, 0x13, KEY_CHANNELDOWN }, + { 0x00, 0x2b, KEY_VOLUMEUP }, + { 0x08, 0x2c, KEY_VOLUMEDOWN }, + { 0x00, 0x20, KEY_UP }, + { 0x08, 0x21, KEY_DOWN }, + { 0x00, 0x11, KEY_LEFT }, + { 0x08, 0x10, KEY_RIGHT }, + { 0x00, 0x0d, KEY_OK }, + { 0x08, 0x1f, KEY_RECORD }, + { 0x00, 0x17, KEY_PLAYPAUSE }, + { 0x08, 0x16, KEY_PLAYPAUSE }, + { 0x00, 0x0b, KEY_STOP }, + { 0x08, 0x27, KEY_FASTFORWARD }, + { 0x00, 0x26, KEY_REWIND }, + { 0x08, 0x1e, KEY_UNKNOWN }, /* Time Shift */ + { 0x00, 0x0e, KEY_UNKNOWN }, /* Snapshot */ + { 0x08, 0x2d, KEY_UNKNOWN }, /* Mouse Cursor */ + { 0x00, 0x0f, KEY_UNKNOWN }, /* Minimize/Maximize */ + { 0x08, 0x14, KEY_UNKNOWN }, /* Shuffle */ + { 0x00, 0x25, KEY_POWER }, +}; + static int cxusb_dee1601_demod_init(struct dvb_frontend* fe) { static u8 clock_config [] = { CLOCK_CTL, 0x38, 0x28 }; @@ -529,6 +688,24 @@ static struct mxl5005s_config aver_a868r_tuner = { .AgcMasterByte = 0x00, }; +/* FIXME: needs tweaking */ +static struct mxl5005s_config d680_dmb_tuner = { + .i2c_address = 0x63, + .if_freq = 36125000UL, + .xtal_freq = CRYSTAL_FREQ_16000000HZ, + .agc_mode = MXL_SINGLE_AGC, + .tracking_filter = MXL_TF_C, + .rssi_enable = MXL_RSSI_ENABLE, + .cap_select = MXL_CAP_SEL_ENABLE, + .div_out = MXL_DIV_OUT_4, + .clock_out = MXL_CLOCK_OUT_DISABLE, + .output_load = MXL5005S_IF_OUTPUT_LOAD_200_OHM, + .top = MXL5005S_TOP_25P2, + .mod_mode = MXL_DIGITAL_MODE, + .if_mode = MXL_ZERO_IF, + .AgcMasterByte = 0x00, +}; + /* Callbacks for DVB USB */ static int cxusb_fmd1216me_tuner_attach(struct dvb_usb_adapter *adap) { @@ -617,6 +794,14 @@ static int cxusb_mxl5003s_tuner_attach(struct dvb_usb_adapter *adap) return 0; } +static int cxusb_d680_dmb_tuner_attach(struct dvb_usb_adapter *adap) +{ + struct dvb_frontend *fe; + fe = dvb_attach(mxl5005s_attach, adap->fe, + &adap->dev->i2c_adap, &d680_dmb_tuner); + return (fe == NULL) ? -EIO : 0; +} + static int cxusb_cx22702_frontend_attach(struct dvb_usb_adapter *adap) { u8 b; @@ -906,6 +1091,54 @@ static int cxusb_nano2_frontend_attach(struct dvb_usb_adapter *adap) return -EIO; } +static struct lgs8gl5_config lgs8gl5_cfg = { + .demod_address = 0x19, +}; + +static int cxusb_d680_dmb_frontend_attach(struct dvb_usb_adapter *adap) +{ + struct dvb_usb_device *d = adap->dev; + int n; + + /* Select required USB configuration */ + if (usb_set_interface(d->udev, 0, 0) < 0) + err("set interface failed"); + + /* Unblock all USB pipes */ + usb_clear_halt(d->udev, + usb_sndbulkpipe(d->udev, d->props.generic_bulk_ctrl_endpoint)); + usb_clear_halt(d->udev, + usb_rcvbulkpipe(d->udev, d->props.generic_bulk_ctrl_endpoint)); + usb_clear_halt(d->udev, + usb_rcvbulkpipe(d->udev, d->props.adapter[0].stream.endpoint)); + + /* Drain USB pipes to avoid hang after reboot */ + for (n = 0; n < 5; n++) { + cxusb_d680_dmb_drain_message(d); + cxusb_d680_dmb_drain_video(d); + msleep(200); + } + + /* Reset the tuner */ + if (cxusb_d680_dmb_gpio_tuner(d, 0x07, 0) < 0) { + err("clear tuner gpio failed"); + return -EIO; + } + msleep(100); + if (cxusb_d680_dmb_gpio_tuner(d, 0x07, 1) < 0) { + err("set tuner gpio failed"); + return -EIO; + } + msleep(100); + + /* Attach frontend */ + adap->fe = dvb_attach(lgs8gl5_attach, &lgs8gl5_cfg, &d->i2c_adap); + if (adap->fe == NULL) + return -EIO; + + return 0; +} + /* * DViCO has shipped two devices with the same USB ID, but only one of them * needs a firmware download. Check the device class details to see if they @@ -985,6 +1218,7 @@ static struct dvb_usb_device_properties cxusb_bluebird_dualdig4_rev2_properties; static struct dvb_usb_device_properties cxusb_bluebird_nano2_properties; static struct dvb_usb_device_properties cxusb_bluebird_nano2_needsfirmware_properties; static struct dvb_usb_device_properties cxusb_aver_a868r_properties; +static struct dvb_usb_device_properties cxusb_d680_dmb_properties; static int cxusb_probe(struct usb_interface *intf, const struct usb_device_id *id) @@ -1011,6 +1245,8 @@ static int cxusb_probe(struct usb_interface *intf, 0 == dvb_usb_device_init(intf, &cxusb_bluebird_dualdig4_rev2_properties, THIS_MODULE, NULL, adapter_nr) || + 0 == dvb_usb_device_init(intf, &cxusb_d680_dmb_properties, + THIS_MODULE, NULL, adapter_nr) || 0) return 0; @@ -1036,6 +1272,7 @@ static struct usb_device_id cxusb_table [] = { { USB_DEVICE(USB_VID_DVICO, USB_PID_DVICO_BLUEBIRD_DVB_T_NANO_2_NFW_WARM) }, { USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_VOLAR_A868R) }, { USB_DEVICE(USB_VID_DVICO, USB_PID_DVICO_BLUEBIRD_DUAL_4_REV_2) }, + { USB_DEVICE(USB_VID_CONEXANT, USB_PID_CONEXANT_D680_DMB) }, {} /* Terminating entry */ }; MODULE_DEVICE_TABLE (usb, cxusb_table); @@ -1530,6 +1767,55 @@ struct dvb_usb_device_properties cxusb_bluebird_dualdig4_rev2_properties = { } }; +static struct dvb_usb_device_properties cxusb_d680_dmb_properties = { + .caps = DVB_USB_IS_AN_I2C_ADAPTER, + + .usb_ctrl = CYPRESS_FX2, + + .size_of_priv = sizeof(struct cxusb_state), + + .num_adapters = 1, + .adapter = { + { + .streaming_ctrl = cxusb_d680_dmb_streaming_ctrl, + .frontend_attach = cxusb_d680_dmb_frontend_attach, + .tuner_attach = cxusb_d680_dmb_tuner_attach, + + /* parameter for the MPEG2-data transfer */ + .stream = { + .type = USB_BULK, + .count = 5, + .endpoint = 0x02, + .u = { + .bulk = { + .buffersize = 8192, + } + } + }, + }, + }, + + .power_ctrl = cxusb_d680_dmb_power_ctrl, + + .i2c_algo = &cxusb_i2c_algo, + + .generic_bulk_ctrl_endpoint = 0x01, + + .rc_interval = 100, + .rc_key_map = d680_dmb_rc_keys, + .rc_key_map_size = ARRAY_SIZE(d680_dmb_rc_keys), + .rc_query = cxusb_d680_dmb_rc_query, + + .num_device_descs = 1, + .devices = { + { + "Conexant DMB-TH Stick", + { NULL }, + { &cxusb_table[18], NULL }, + }, + } +}; + static struct usb_driver cxusb_driver = { .name = "dvb_usb_cxusb", .probe = cxusb_probe, diff --git a/drivers/media/dvb/dvb-usb/dvb-usb-ids.h b/drivers/media/dvb/dvb-usb/dvb-usb-ids.h index f327a15..81369b7 100644 --- a/drivers/media/dvb/dvb-usb/dvb-usb-ids.h +++ b/drivers/media/dvb/dvb-usb/dvb-usb-ids.h @@ -22,6 +22,7 @@ #define USB_VID_AVERMEDIA 0x07ca #define USB_VID_COMPRO 0x185b #define USB_VID_COMPRO_UNK 0x145f +#define USB_VID_CONEXANT 0x0572 #define USB_VID_CYPRESS 0x04b4 #define USB_VID_DIBCOM 0x10b8 #define USB_VID_DPOSH 0x1498 @@ -69,6 +70,7 @@ #define USB_PID_COMPRO_DVBU2000_UNK_WARM 0x010d #define USB_PID_COMPRO_VIDEOMATE_U500 0x1e78 #define USB_PID_COMPRO_VIDEOMATE_U500_PC 0x1e80 +#define USB_PID_CONEXANT_D680_DMB 0x86d6 #define USB_PID_DIBCOM_HOOK_DEFAULT 0x0064 #define USB_PID_DIBCOM_HOOK_DEFAULT_REENUM 0x0065 #define USB_PID_DIBCOM_MOD3000_COLD 0x0bb8 diff --git a/drivers/media/dvb/frontends/Kconfig b/drivers/media/dvb/frontends/Kconfig index 7dbb4a2..774f5c2 100644 --- a/drivers/media/dvb/frontends/Kconfig +++ b/drivers/media/dvb/frontends/Kconfig @@ -385,4 +385,11 @@ config DVB_ISL6421 help An SEC control chip. +config DVB_LGS8GL5 + tristate "Silicon Legend LGS-8GL5 demodulator (OFDM)" + depends on DVB_CORE && I2C + default m if DVB_FE_CUSTOMISE + help + A DMB-TH tuner module. Say Y when you want to support this frontend. + endmenu diff --git a/drivers/media/dvb/frontends/Makefile b/drivers/media/dvb/frontends/Makefile index 028da55..262eaa4 100644 --- a/drivers/media/dvb/frontends/Makefile +++ b/drivers/media/dvb/frontends/Makefile @@ -48,3 +48,4 @@ obj-$(CONFIG_DVB_TUNER_ITD1000) += itd1000.o obj-$(CONFIG_DVB_AU8522) += au8522.o obj-$(CONFIG_DVB_TDA10048) += tda10048.o obj-$(CONFIG_DVB_S5H1411) += s5h1411.o +obj-$(CONFIG_DVB_LGS8GL5) += lgs8gl5.o diff --git a/drivers/media/dvb/frontends/lgs8gl5.c b/drivers/media/dvb/frontends/lgs8gl5.c new file mode 100644 index 0000000..c0a223d --- /dev/null +++ b/drivers/media/dvb/frontends/lgs8gl5.c @@ -0,0 +1,480 @@ +/* + Legend Silicon LGS-8GL5 DMB-TH OFDM demodulator driver + + Copyright (C) 2008 Sirius International (Hong Kong) Limited + Timothy Lee + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + +*/ + +#include +#include +#include +#include +#include +#include "dvb_frontend.h" +#include "lgs8gl5.h" + + +#define REG_RESET 0x02 +#define REG_RESET_OFF 0x01 +#define REG_03 0x03 +#define REG_04 0x04 +#define REG_07 0x07 +#define REG_09 0x09 +#define REG_0A 0x0a +#define REG_0B 0x0b +#define REG_0C 0x0c +#define REG_37 0x37 +#define REG_STRENGTH 0x4b +#define REG_STRENGTH_MASK 0x7f +#define REG_STRENGTH_CARRIER 0x80 +#define REG_INVERSION 0x7c +#define REG_INVERSION_ON 0x80 +#define REG_7D 0x7d +#define REG_7E 0x7e +#define REG_A2 0xa2 +#define REG_STATUS 0xa4 +#define REG_STATUS_SYNC 0x04 +#define REG_STATUS_LOCK 0x01 + + +struct lgs8gl5_state { + struct i2c_adapter *i2c; + const struct lgs8gl5_config *config; + struct dvb_frontend frontend; +}; + + +static int debug; +#define dprintk(args...) \ + do { \ + if (debug) \ + printk(KERN_DEBUG "lgs8gl5: " args); \ + } while (0) + + +/* Writes into demod's register */ +static int +lgs8gl5_write_reg(struct lgs8gl5_state *state, u8 reg, u8 data) +{ + int ret; + u8 buf[] = {reg, data}; + struct i2c_msg msg = { + .addr = state->config->demod_address, + .flags = 0, + .buf = buf, + .len = 2 + }; + + ret = i2c_transfer(state->i2c, &msg, 1); + if (ret != 1) + dprintk("%s: error (reg=0x%02x, val=0x%02x, ret=%i)\n", + __func__, reg, data, ret); + return (ret != 1) ? -1 : 0; +} + + +/* Reads from demod's register */ +static int +lgs8gl5_read_reg(struct lgs8gl5_state *state, u8 reg) +{ + int ret, j; + u8 b0[] = {reg}; + u8 b1[] = {0}; + struct i2c_msg msg[2] = { + { + .addr = state->config->demod_address, + .flags = 0, + .buf = b0, + .len = 1 + }, + { + .addr = state->config->demod_address, + .flags = I2C_M_RD, + .buf = b1, + .len = 1 + } + }; + + ret = i2c_transfer(state->i2c, msg, 2); + if (ret != 2) + return -EIO; + + return b1[0]; +} + + +static int +lgs8gl5_update_reg(struct lgs8gl5_state *state, u8 reg, u8 data) +{ + lgs8gl5_read_reg(state, reg); + lgs8gl5_write_reg(state, reg, data); + return 0; +} + + +/* Writes into alternate device's register */ +/* TODO: Find out what that device is for! */ +static int +lgs8gl5_update_alt_reg(struct lgs8gl5_state *state, u8 reg, u8 data) +{ + int ret, j; + u8 b0[] = {reg}; + u8 b1[] = {0}; + u8 b2[] = {reg, data}; + struct i2c_msg msg[3] = { + { + .addr = state->config->demod_address + 2, + .flags = 0, + .buf = b0, + .len = 1 + }, + { + .addr = state->config->demod_address + 2, + .flags = I2C_M_RD, + .buf = b1, + .len = 1 + }, + { + .addr = state->config->demod_address + 2, + .flags = 0, + .buf = b2, + .len = 2 + }, + }; + + ret = i2c_transfer(state->i2c, msg, 3); + return (ret != 3) ? -1 : 0; +} + + +static void +lgs8gl5_soft_reset(struct lgs8gl5_state *state) +{ + u8 val; + + dprintk("%s\n", __func__); + + val = lgs8gl5_read_reg(state, REG_RESET); + lgs8gl5_write_reg(state, REG_RESET, val & ~REG_RESET_OFF); + lgs8gl5_write_reg(state, REG_RESET, val | REG_RESET_OFF); + msleep(5); +} + + +static int +lgs8gl5_set_inversion(struct lgs8gl5_state *state, int inversion) +{ + u8 val; + + dprintk("%s\n", __func__); + + switch (inversion) { + case INVERSION_AUTO: + return -EOPNOTSUPP; + case INVERSION_ON: + val = lgs8gl5_read_reg(state, REG_INVERSION); + return lgs8gl5_write_reg(state, REG_INVERSION, + val | REG_INVERSION_ON); + case INVERSION_OFF: + val = lgs8gl5_read_reg(state, REG_INVERSION); + return lgs8gl5_write_reg(state, REG_INVERSION, + val & ~REG_INVERSION_ON); + default: + return -EINVAL; + } +} + + +/* Starts demodulation */ +static void +lgs8gl5_start_demod(struct lgs8gl5_state *state) +{ + u8 val; + int n; + + dprintk("%s\n", __func__); + + lgs8gl5_update_alt_reg(state, 0xc2, 0x28); + lgs8gl5_soft_reset(state); + lgs8gl5_update_reg(state, REG_07, 0x10); + lgs8gl5_update_reg(state, REG_07, 0x10); + lgs8gl5_write_reg(state, REG_09, 0x0e); + lgs8gl5_write_reg(state, REG_0A, 0xe5); + lgs8gl5_write_reg(state, REG_0B, 0x35); + lgs8gl5_write_reg(state, REG_0C, 0x30); + + lgs8gl5_update_reg(state, REG_03, 0x00); + lgs8gl5_update_reg(state, REG_7E, 0x01); + lgs8gl5_update_alt_reg(state, 0xc5, 0x00); + lgs8gl5_update_reg(state, REG_04, 0x02); + lgs8gl5_update_reg(state, REG_37, 0x01); + lgs8gl5_soft_reset(state); + + /* Wait for carrier */ + for (n = 0; n < 10; n++) { + val = lgs8gl5_read_reg(state, REG_STRENGTH); + dprintk("Wait for carrier[%d] 0x%02X\n", n, val); + if (val & REG_STRENGTH_CARRIER) + break; + msleep(4); + } + if (!(val & REG_STRENGTH_CARRIER)) + return; + + /* Wait for lock */ + for (n = 0; n < 20; n++) { + val = lgs8gl5_read_reg(state, REG_STATUS); + dprintk("Wait for lock[%d] 0x%02X\n", n, val); + if (val & REG_STATUS_LOCK) + break; + msleep(12); + } + if (!(val & REG_STATUS_LOCK)) + return; + + lgs8gl5_write_reg(state, REG_7D, lgs8gl5_read_reg(state, REG_A2)); + lgs8gl5_soft_reset(state); +} + + +static int +lgs8gl5_init(struct dvb_frontend *fe) +{ + struct lgs8gl5_state *state = fe->demodulator_priv; + + dprintk("%s\n", __func__); + + lgs8gl5_update_alt_reg(state, 0xc2, 0x28); + lgs8gl5_soft_reset(state); + lgs8gl5_update_reg(state, REG_07, 0x10); + lgs8gl5_update_reg(state, REG_07, 0x10); + lgs8gl5_write_reg(state, REG_09, 0x0e); + lgs8gl5_write_reg(state, REG_0A, 0xe5); + lgs8gl5_write_reg(state, REG_0B, 0x35); + lgs8gl5_write_reg(state, REG_0C, 0x30); + + return 0; +} + + +static int +lgs8gl5_read_status(struct dvb_frontend *fe, fe_status_t *status) +{ + struct lgs8gl5_state *state = fe->demodulator_priv; + u8 level = lgs8gl5_read_reg(state, REG_STRENGTH); + u8 flags = lgs8gl5_read_reg(state, REG_STATUS); + + *status = 0; + + if ((level & REG_STRENGTH_MASK) > 0) + *status |= FE_HAS_SIGNAL; + if (level & REG_STRENGTH_CARRIER) + *status |= FE_HAS_CARRIER; + if (flags & REG_STATUS_SYNC) + *status |= FE_HAS_SYNC; + if (flags & REG_STATUS_LOCK) + *status |= FE_HAS_LOCK; + + return 0; +} + + +static int +lgs8gl5_read_ber(struct dvb_frontend *fe, u32 *ber) +{ + struct lgs8gl5_state *state = fe->demodulator_priv; + *ber = 0; + + return 0; +} + + +static int +lgs8gl5_read_signal_strength(struct dvb_frontend *fe, u16 *signal_strength) +{ + struct lgs8gl5_state *state = fe->demodulator_priv; + u8 level = lgs8gl5_read_reg(state, REG_STRENGTH); + *signal_strength = (level & REG_STRENGTH_MASK) << 8; + + return 0; +} + + +static int +lgs8gl5_read_snr(struct dvb_frontend *fe, u16 *snr) +{ + struct lgs8gl5_state *state = fe->demodulator_priv; + u8 level = lgs8gl5_read_reg(state, REG_STRENGTH); + *snr = (level & REG_STRENGTH_MASK) << 8; + + return 0; +} + + +static int +lgs8gl5_read_ucblocks(struct dvb_frontend *fe, u32 *ucblocks) +{ + struct lgs8gl5_state *state = fe->demodulator_priv; + *ucblocks = 0; + + return 0; +} + + +static int +lgs8gl5_set_frontend(struct dvb_frontend *fe, + struct dvb_frontend_parameters *p) +{ + struct lgs8gl5_state *state = fe->demodulator_priv; + + dprintk("%s\n", __func__); + + if (p->u.ofdm.bandwidth != BANDWIDTH_8_MHZ) + return -EINVAL; + + if (fe->ops.tuner_ops.set_params) { + fe->ops.tuner_ops.set_params(fe, p); + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 0); + } + + /* lgs8gl5_set_inversion(state, p->inversion); */ + + lgs8gl5_start_demod(state); + + return 0; +} + + +static int +lgs8gl5_get_frontend(struct dvb_frontend *fe, + struct dvb_frontend_parameters *p) +{ + struct lgs8gl5_state *state = fe->demodulator_priv; + u8 inv = lgs8gl5_read_reg(state, REG_INVERSION); + struct dvb_ofdm_parameters *o = &p->u.ofdm; + + p->inversion = (inv & REG_INVERSION_ON) ? INVERSION_ON : INVERSION_OFF; + + o->code_rate_HP = FEC_1_2; + o->code_rate_LP = FEC_7_8; + o->guard_interval = GUARD_INTERVAL_1_32; + o->transmission_mode = TRANSMISSION_MODE_2K; + o->constellation = QAM_64; + o->hierarchy_information = HIERARCHY_NONE; + o->bandwidth = BANDWIDTH_8_MHZ; + + return 0; +} + + +static int +lgs8gl5_get_tune_settings(struct dvb_frontend *fe, + struct dvb_frontend_tune_settings *fesettings) +{ + fesettings->min_delay_ms = 240; + fesettings->step_size = 0; + fesettings->max_drift = 0; + return 0; +} + + +static void +lgs8gl5_release(struct dvb_frontend *fe) +{ + struct lgs8gl5_state *state = fe->demodulator_priv; + kfree(state); +} + + +static struct dvb_frontend_ops lgs8gl5_ops; + + +struct dvb_frontend* +lgs8gl5_attach(const struct lgs8gl5_config *config, struct i2c_adapter *i2c) +{ + struct lgs8gl5_state *state = NULL; + + dprintk("%s\n", __func__); + + /* Allocate memory for the internal state */ + state = kmalloc(sizeof(struct lgs8gl5_state), GFP_KERNEL); + if (state == NULL) + goto error; + + /* Setup the state */ + state->config = config; + state->i2c = i2c; + + /* Check if the demod is there */ + if (lgs8gl5_read_reg(state, REG_RESET) < 0) + goto error; + + /* Create dvb_frontend */ + memcpy(&state->frontend.ops, &lgs8gl5_ops, + sizeof(struct dvb_frontend_ops)); + state->frontend.demodulator_priv = state; + return &state->frontend; + +error: + kfree(state); + return NULL; +} +EXPORT_SYMBOL(lgs8gl5_attach); + + +static struct dvb_frontend_ops lgs8gl5_ops = { + .info = { + .name = "Legend Silicon LGS-8GL5 DMB-TH", + .type = FE_OFDM, + .frequency_min = 474000000, + .frequency_max = 858000000, + .frequency_stepsize = 10000, + .frequency_tolerance = 0, + .caps = FE_CAN_FEC_AUTO | + FE_CAN_QPSK | FE_CAN_QAM_16 | FE_CAN_QAM_32 | + FE_CAN_QAM_64 | FE_CAN_QAM_AUTO | + FE_CAN_TRANSMISSION_MODE_AUTO | + FE_CAN_BANDWIDTH_AUTO | + FE_CAN_GUARD_INTERVAL_AUTO | + FE_CAN_HIERARCHY_AUTO | + FE_CAN_RECOVER + }, + + .release = lgs8gl5_release, + + .init = lgs8gl5_init, + + .set_frontend = lgs8gl5_set_frontend, + .get_frontend = lgs8gl5_get_frontend, + .get_tune_settings = lgs8gl5_get_tune_settings, + + .read_status = lgs8gl5_read_status, + .read_ber = lgs8gl5_read_ber, + .read_signal_strength = lgs8gl5_read_signal_strength, + .read_snr = lgs8gl5_read_snr, + .read_ucblocks = lgs8gl5_read_ucblocks, +}; + + +module_param(debug, int, 0644); +MODULE_PARM_DESC(debug, "Turn on/off frontend debugging (default:off)."); + +MODULE_DESCRIPTION("Legend Silicon LGS-8GL5 DMB-TH Demodulator driver"); +MODULE_AUTHOR("Timothy Lee"); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/dvb/frontends/lgs8gl5.h b/drivers/media/dvb/frontends/lgs8gl5.h new file mode 100644 index 0000000..d1417678 --- /dev/null +++ b/drivers/media/dvb/frontends/lgs8gl5.h @@ -0,0 +1,45 @@ +/* + Legend Silicon LGS-8GL5 DMB-TH OFDM demodulator driver + + Copyright (C) 2008 Sirius International (Hong Kong) Limited + Timothy Lee + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + +*/ + +#ifndef LGS8GL5_H +#define LGS8GL5_H + +#include + +struct lgs8gl5_config { + /* the demodulator's i2c address */ + u8 demod_address; +}; + +#if defined(CONFIG_DVB_LGS8GL5) || \ + (defined(CONFIG_DVB_LGS8GL5_MODULE) && defined(MODULE)) +extern struct dvb_frontend *lgs8gl5_attach( + const struct lgs8gl5_config *config, struct i2c_adapter *i2c); +#else +static inline struct dvb_frontend *lgs8gl5_attach( + const struct lgs8gl5_config *config, struct i2c_adapter *i2c) { + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); + return NULL; +} +#endif /* CONFIG_DVB_LGS8GL5 */ + +#endif /* LGS8GL5_H */ -- cgit v0.10.2 From 3a6b974d37370e89637f870657f93fd859e09ee3 Mon Sep 17 00:00:00 2001 From: Michael Krufky Date: Sat, 9 Aug 2008 15:29:46 -0300 Subject: V4L/DVB (8658): lgs8gl5: fix build warnings Fix the following build warnings: lgs8gl5.c: In function 'lgs8gl5_read_reg': lgs8gl5.c:95: warning: unused variable 'j' lgs8gl5.c: In function 'lgs8gl5_update_alt_reg': lgs8gl5.c:135: warning: unused variable 'j' lgs8gl5.c: In function 'lgs8gl5_read_ber': lgs8gl5.c:300: warning: unused variable 'state' lgs8gl5.c: In function 'lgs8gl5_read_ucblocks': lgs8gl5.c:332: warning: unused variable 'state' lgs8gl5.c: At top level: lgs8gl5.c:181: warning: 'lgs8gl5_set_inversion' defined but not used Signed-off-by: Michael Krufky Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/dvb/frontends/lgs8gl5.c b/drivers/media/dvb/frontends/lgs8gl5.c index c0a223d..855852f 100644 --- a/drivers/media/dvb/frontends/lgs8gl5.c +++ b/drivers/media/dvb/frontends/lgs8gl5.c @@ -92,7 +92,7 @@ lgs8gl5_write_reg(struct lgs8gl5_state *state, u8 reg, u8 data) static int lgs8gl5_read_reg(struct lgs8gl5_state *state, u8 reg) { - int ret, j; + int ret; u8 b0[] = {reg}; u8 b1[] = {0}; struct i2c_msg msg[2] = { @@ -132,7 +132,7 @@ lgs8gl5_update_reg(struct lgs8gl5_state *state, u8 reg, u8 data) static int lgs8gl5_update_alt_reg(struct lgs8gl5_state *state, u8 reg, u8 data) { - int ret, j; + int ret; u8 b0[] = {reg}; u8 b1[] = {0}; u8 b2[] = {reg, data}; @@ -176,30 +176,6 @@ lgs8gl5_soft_reset(struct lgs8gl5_state *state) } -static int -lgs8gl5_set_inversion(struct lgs8gl5_state *state, int inversion) -{ - u8 val; - - dprintk("%s\n", __func__); - - switch (inversion) { - case INVERSION_AUTO: - return -EOPNOTSUPP; - case INVERSION_ON: - val = lgs8gl5_read_reg(state, REG_INVERSION); - return lgs8gl5_write_reg(state, REG_INVERSION, - val | REG_INVERSION_ON); - case INVERSION_OFF: - val = lgs8gl5_read_reg(state, REG_INVERSION); - return lgs8gl5_write_reg(state, REG_INVERSION, - val & ~REG_INVERSION_ON); - default: - return -EINVAL; - } -} - - /* Starts demodulation */ static void lgs8gl5_start_demod(struct lgs8gl5_state *state) @@ -297,7 +273,6 @@ lgs8gl5_read_status(struct dvb_frontend *fe, fe_status_t *status) static int lgs8gl5_read_ber(struct dvb_frontend *fe, u32 *ber) { - struct lgs8gl5_state *state = fe->demodulator_priv; *ber = 0; return 0; @@ -329,7 +304,6 @@ lgs8gl5_read_snr(struct dvb_frontend *fe, u16 *snr) static int lgs8gl5_read_ucblocks(struct dvb_frontend *fe, u32 *ucblocks) { - struct lgs8gl5_state *state = fe->demodulator_priv; *ucblocks = 0; return 0; -- cgit v0.10.2 From 05d26cc894cb42f5c71eaf667d700dd632745cd9 Mon Sep 17 00:00:00 2001 From: Alexander Beregalov Date: Wed, 20 Aug 2008 20:44:54 -0300 Subject: V4L/DVB (8680): saa7134-core.c: fix warning drivers/media/video/saa7134/saa7134-core.c:366: warning: 'saa7134_buffer_requeue' defined but not used Signed-off-by: Alexander Beregalov Signed-off-by: Andrew Morton Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/saa7134/saa7134-core.c b/drivers/media/video/saa7134/saa7134-core.c index 75d6184..64f20fd 100644 --- a/drivers/media/video/saa7134/saa7134-core.c +++ b/drivers/media/video/saa7134/saa7134-core.c @@ -359,32 +359,6 @@ void saa7134_buffer_timeout(unsigned long data) spin_unlock_irqrestore(&dev->slock,flags); } -/* resends a current buffer in queue after resume */ - -static int saa7134_buffer_requeue(struct saa7134_dev *dev, - struct saa7134_dmaqueue *q) -{ - struct saa7134_buf *buf, *next; - - assert_spin_locked(&dev->slock); - - buf = q->curr; - next = buf; - dprintk("buffer_requeue\n"); - - if (!buf) - return 0; - - dprintk("buffer_requeue : resending active buffers \n"); - - if (!list_empty(&q->queue)) - next = list_entry(q->queue.next, struct saa7134_buf, - vb.queue); - buf->activate(dev, buf, next); - - return 0; -} - /* ------------------------------------------------------------------ */ int saa7134_set_dmabits(struct saa7134_dev *dev) @@ -1139,6 +1113,32 @@ static void __devexit saa7134_finidev(struct pci_dev *pci_dev) } #ifdef CONFIG_PM + +/* resends a current buffer in queue after resume */ +static int saa7134_buffer_requeue(struct saa7134_dev *dev, + struct saa7134_dmaqueue *q) +{ + struct saa7134_buf *buf, *next; + + assert_spin_locked(&dev->slock); + + buf = q->curr; + next = buf; + dprintk("buffer_requeue\n"); + + if (!buf) + return 0; + + dprintk("buffer_requeue : resending active buffers \n"); + + if (!list_empty(&q->queue)) + next = list_entry(q->queue.next, struct saa7134_buf, + vb.queue); + buf->activate(dev, buf, next); + + return 0; +} + static int saa7134_suspend(struct pci_dev *pci_dev , pm_message_t state) { -- cgit v0.10.2 From 9cc6493d4b5b06e976e527737301d90044037b57 Mon Sep 17 00:00:00 2001 From: Robert Jarzmik Date: Thu, 14 Aug 2008 11:36:37 -0300 Subject: V4L/DVB (8683): Add Micron mt9m111 chip ID in V4L2 identifiers Signed-off-by: Robert Jarzmik Signed-off-by: Guennadi Liakhovetski Signed-off-by: Mauro Carvalho Chehab diff --git a/include/media/v4l2-chip-ident.h b/include/media/v4l2-chip-ident.h index be782d5..d73a8e9 100644 --- a/include/media/v4l2-chip-ident.h +++ b/include/media/v4l2-chip-ident.h @@ -165,6 +165,7 @@ enum { /* Micron CMOS sensor chips: 45000-45099 */ V4L2_IDENT_MT9M001C12ST = 45000, V4L2_IDENT_MT9M001C12STM = 45005, + V4L2_IDENT_MT9M111 = 45007, V4L2_IDENT_MT9V022IX7ATC = 45010, /* No way to detect "normal" I77ATx */ V4L2_IDENT_MT9V022IX7ATM = 45015, /* and "lead free" IA7ATx chips */ }; -- cgit v0.10.2 From 77110abbfbfd7673be6d18ef0875350eabee7532 Mon Sep 17 00:00:00 2001 From: Robert Jarzmik Date: Thu, 14 Aug 2008 12:02:51 -0300 Subject: V4L/DVB (8684): Add support for Micron MT9M111 camera. Adds support for Micron MT9M111 camera chip, with basic features : - view rectangle configurable - some output formats (bayer8, bayer10, rgb565, rgb555, ycbycr) - autoexposure - only highpower mode context used (ie. context B) create mode 100644 drivers/media/video/mt9m111.c Signed-off-by: Robert Jarzmik Signed-off-by: Guennadi Liakhovetski Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig index 367666d..6ebe9f1 100644 --- a/drivers/media/video/Kconfig +++ b/drivers/media/video/Kconfig @@ -809,6 +809,12 @@ config MT9M001_PCA9536_SWITCH Select this if your MT9M001 camera uses a PCA9536 I2C GPIO extender to switch between 8 and 10 bit datawidth modes +config SOC_CAMERA_MT9M111 + tristate "mt9m001 support" + depends on SOC_CAMERA && I2C + help + This driver supports MT9M111 cameras from Micron + config SOC_CAMERA_MT9V022 tristate "mt9v022 support" depends on SOC_CAMERA && I2C diff --git a/drivers/media/video/Makefile b/drivers/media/video/Makefile index ef7c8d3..d234db7 100644 --- a/drivers/media/video/Makefile +++ b/drivers/media/video/Makefile @@ -137,6 +137,7 @@ obj-$(CONFIG_VIDEO_PXA27x) += pxa_camera.o obj-$(CONFIG_VIDEO_SH_MOBILE_CEU) += sh_mobile_ceu_camera.o obj-$(CONFIG_SOC_CAMERA) += soc_camera.o obj-$(CONFIG_SOC_CAMERA_MT9M001) += mt9m001.o +obj-$(CONFIG_SOC_CAMERA_MT9M111) += mt9m111.o obj-$(CONFIG_SOC_CAMERA_MT9V022) += mt9v022.o obj-$(CONFIG_SOC_CAMERA_PLATFORM) += soc_camera_platform.o diff --git a/drivers/media/video/mt9m111.c b/drivers/media/video/mt9m111.c new file mode 100644 index 0000000..0c88e5d --- /dev/null +++ b/drivers/media/video/mt9m111.c @@ -0,0 +1,960 @@ +/* + * Driver for MT9M111 CMOS Image Sensor from Micron + * + * Copyright (C) 2008, Robert Jarzmik + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +/* + * mt9m111 i2c address is 0x5d or 0x48 (depending on SAddr pin) + * The platform has to define i2c_board_info and call i2c_register_board_info() + */ + +/* mt9m111: Sensor register addresses */ +#define MT9M111_CHIP_VERSION 0x000 +#define MT9M111_ROW_START 0x001 +#define MT9M111_COLUMN_START 0x002 +#define MT9M111_WINDOW_HEIGHT 0x003 +#define MT9M111_WINDOW_WIDTH 0x004 +#define MT9M111_HORIZONTAL_BLANKING_B 0x005 +#define MT9M111_VERTICAL_BLANKING_B 0x006 +#define MT9M111_HORIZONTAL_BLANKING_A 0x007 +#define MT9M111_VERTICAL_BLANKING_A 0x008 +#define MT9M111_SHUTTER_WIDTH 0x009 +#define MT9M111_ROW_SPEED 0x00a +#define MT9M111_EXTRA_DELAY 0x00b +#define MT9M111_SHUTTER_DELAY 0x00c +#define MT9M111_RESET 0x00d +#define MT9M111_READ_MODE_B 0x020 +#define MT9M111_READ_MODE_A 0x021 +#define MT9M111_FLASH_CONTROL 0x023 +#define MT9M111_GREEN1_GAIN 0x02b +#define MT9M111_BLUE_GAIN 0x02c +#define MT9M111_RED_GAIN 0x02d +#define MT9M111_GREEN2_GAIN 0x02e +#define MT9M111_GLOBAL_GAIN 0x02f +#define MT9M111_CONTEXT_CONTROL 0x0c8 +#define MT9M111_PAGE_MAP 0x0f0 +#define MT9M111_BYTE_WISE_ADDR 0x0f1 + +#define MT9M111_RESET_SYNC_CHANGES (1 << 15) +#define MT9M111_RESET_RESTART_BAD_FRAME (1 << 9) +#define MT9M111_RESET_SHOW_BAD_FRAMES (1 << 8) +#define MT9M111_RESET_RESET_SOC (1 << 5) +#define MT9M111_RESET_OUTPUT_DISABLE (1 << 4) +#define MT9M111_RESET_CHIP_ENABLE (1 << 3) +#define MT9M111_RESET_ANALOG_STANDBY (1 << 2) +#define MT9M111_RESET_RESTART_FRAME (1 << 1) +#define MT9M111_RESET_RESET_MODE (1 << 0) + +#define MT9M111_RMB_MIRROR_COLS (1 << 1) +#define MT9M111_RMB_MIRROR_ROWS (1 << 0) +#define MT9M111_CTXT_CTRL_RESTART (1 << 15) +#define MT9M111_CTXT_CTRL_DEFECTCOR_B (1 << 12) +#define MT9M111_CTXT_CTRL_RESIZE_B (1 << 10) +#define MT9M111_CTXT_CTRL_CTRL2_B (1 << 9) +#define MT9M111_CTXT_CTRL_GAMMA_B (1 << 8) +#define MT9M111_CTXT_CTRL_XENON_EN (1 << 7) +#define MT9M111_CTXT_CTRL_READ_MODE_B (1 << 3) +#define MT9M111_CTXT_CTRL_LED_FLASH_EN (1 << 2) +#define MT9M111_CTXT_CTRL_VBLANK_SEL_B (1 << 1) +#define MT9M111_CTXT_CTRL_HBLANK_SEL_B (1 << 0) +/* + * mt9m111: Colorpipe register addresses (0x100..0x1ff) + */ +#define MT9M111_OPER_MODE_CTRL 0x106 +#define MT9M111_OUTPUT_FORMAT_CTRL 0x108 +#define MT9M111_REDUCER_XZOOM_B 0x1a0 +#define MT9M111_REDUCER_XSIZE_B 0x1a1 +#define MT9M111_REDUCER_YZOOM_B 0x1a3 +#define MT9M111_REDUCER_YSIZE_B 0x1a4 +#define MT9M111_REDUCER_XZOOM_A 0x1a6 +#define MT9M111_REDUCER_XSIZE_A 0x1a7 +#define MT9M111_REDUCER_YZOOM_A 0x1a9 +#define MT9M111_REDUCER_YSIZE_A 0x1aa + +#define MT9M111_OUTPUT_FORMAT_CTRL2_A 0x13a +#define MT9M111_OUTPUT_FORMAT_CTRL2_B 0x19b + +#define MT9M111_OPMODE_AUTOEXPO_EN (1 << 14) + + +#define MT9M111_OUTFMT_PROCESSED_BAYER (1 << 14) +#define MT9M111_OUTFMT_BYPASS_IFP (1 << 10) +#define MT9M111_OUTFMT_INV_PIX_CLOCK (1 << 9) +#define MT9M111_OUTFMT_RGB (1 << 8) +#define MT9M111_OUTFMT_RGB565 (0x0 << 6) +#define MT9M111_OUTFMT_RGB555 (0x1 << 6) +#define MT9M111_OUTFMT_RGB444x (0x2 << 6) +#define MT9M111_OUTFMT_RGBx444 (0x3 << 6) +#define MT9M111_OUTFMT_TST_RAMP_OFF (0x0 << 4) +#define MT9M111_OUTFMT_TST_RAMP_COL (0x1 << 4) +#define MT9M111_OUTFMT_TST_RAMP_ROW (0x2 << 4) +#define MT9M111_OUTFMT_TST_RAMP_FRAME (0x3 << 4) +#define MT9M111_OUTFMT_SHIFT_3_UP (1 << 3) +#define MT9M111_OUTFMT_AVG_CHROMA (1 << 2) +#define MT9M111_OUTFMT_SWAP_YCbCr_C_Y (1 << 1) +#define MT9M111_OUTFMT_SWAP_RGB_EVEN (1 << 1) +#define MT9M111_OUTFMT_SWAP_YCbCr_Cb_Cr (1 << 0) +/* + * mt9m111: Camera control register addresses (0x200..0x2ff not implemented) + */ + +#define reg_read(reg) mt9m111_reg_read(icd, MT9M111_##reg) +#define reg_write(reg, val) mt9m111_reg_write(icd, MT9M111_##reg, (val)) +#define reg_set(reg, val) mt9m111_reg_set(icd, MT9M111_##reg, (val)) +#define reg_clear(reg, val) mt9m111_reg_clear(icd, MT9M111_##reg, (val)) + +#define MT9M111_MIN_DARK_ROWS 8 +#define MT9M111_MIN_DARK_COLS 24 +#define MT9M111_MAX_HEIGHT 1024 +#define MT9M111_MAX_WIDTH 1280 + +#define COL_FMT(_name, _depth, _fourcc, _colorspace) \ + { .name = _name, .depth = _depth, .fourcc = _fourcc, \ + .colorspace = _colorspace } +#define RGB_FMT(_name, _depth, _fourcc) \ + COL_FMT(_name, _depth, _fourcc, V4L2_COLORSPACE_SRGB) + +static const struct soc_camera_data_format mt9m111_colour_formats[] = { + COL_FMT("YCrYCb 8 bit", 8, V4L2_PIX_FMT_YUYV, V4L2_COLORSPACE_JPEG), + RGB_FMT("RGB 565", 16, V4L2_PIX_FMT_RGB565), + RGB_FMT("RGB 555", 16, V4L2_PIX_FMT_RGB555), + RGB_FMT("Bayer (sRGB) 10 bit", 10, V4L2_PIX_FMT_SBGGR16), + RGB_FMT("Bayer (sRGB) 8 bit", 8, V4L2_PIX_FMT_SBGGR8), +}; + +enum mt9m111_context { + HIGHPOWER = 0, + LOWPOWER, +}; + +struct mt9m111 { + struct i2c_client *client; + struct soc_camera_device icd; + int model; /* V4L2_IDENT_MT9M111* codes from v4l2-chip-ident.h */ + enum mt9m111_context context; + unsigned int left, top, width, height; + u32 pixfmt; + unsigned char autoexposure; + unsigned char datawidth; + unsigned int powered:1; + unsigned int hflip:1; + unsigned int vflip:1; + unsigned int swap_rgb_even_odd:1; + unsigned int swap_rgb_red_blue:1; + unsigned int swap_yuv_y_chromas:1; + unsigned int swap_yuv_cb_cr:1; +}; + +static int reg_page_map_set(struct i2c_client *client, const u16 reg) +{ + int ret; + u16 page; + static int lastpage = -1; /* PageMap cache value */ + + page = (reg >> 8); + if (page == lastpage) + return 0; + if (page > 2) + return -EINVAL; + + ret = i2c_smbus_write_word_data(client, MT9M111_PAGE_MAP, swab16(page)); + if (ret >= 0) + lastpage = page; + return ret; +} + +static int mt9m111_reg_read(struct soc_camera_device *icd, const u16 reg) +{ + struct mt9m111 *mt9m111 = container_of(icd, struct mt9m111, icd); + struct i2c_client *client = mt9m111->client; + int ret; + + ret = reg_page_map_set(client, reg); + if (!ret) + ret = swab16(i2c_smbus_read_word_data(client, (reg & 0xff))); + + dev_dbg(&icd->dev, "read reg.%03x -> %04x\n", reg, ret); + return ret; +} + +static int mt9m111_reg_write(struct soc_camera_device *icd, const u16 reg, + const u16 data) +{ + struct mt9m111 *mt9m111 = container_of(icd, struct mt9m111, icd); + struct i2c_client *client = mt9m111->client; + int ret; + + ret = reg_page_map_set(client, reg); + if (ret >= 0) + ret = i2c_smbus_write_word_data(mt9m111->client, (reg & 0xff), + swab16(data)); + dev_dbg(&icd->dev, "write reg.%03x = %04x -> %d\n", reg, data, ret); + return ret; +} + +static int mt9m111_reg_set(struct soc_camera_device *icd, const u16 reg, + const u16 data) +{ + int ret; + + ret = mt9m111_reg_read(icd, reg); + if (ret >= 0) + ret = mt9m111_reg_write(icd, reg, ret | data); + return ret; +} + +static int mt9m111_reg_clear(struct soc_camera_device *icd, const u16 reg, + const u16 data) +{ + int ret; + + ret = mt9m111_reg_read(icd, reg); + return mt9m111_reg_write(icd, reg, ret & ~data); +} + +static int mt9m111_set_context(struct soc_camera_device *icd, + enum mt9m111_context ctxt) +{ + int valB = MT9M111_CTXT_CTRL_RESTART | MT9M111_CTXT_CTRL_DEFECTCOR_B + | MT9M111_CTXT_CTRL_RESIZE_B | MT9M111_CTXT_CTRL_CTRL2_B + | MT9M111_CTXT_CTRL_GAMMA_B | MT9M111_CTXT_CTRL_READ_MODE_B + | MT9M111_CTXT_CTRL_VBLANK_SEL_B + | MT9M111_CTXT_CTRL_HBLANK_SEL_B; + int valA = MT9M111_CTXT_CTRL_RESTART; + + if (ctxt == HIGHPOWER) + return reg_write(CONTEXT_CONTROL, valB); + else + return reg_write(CONTEXT_CONTROL, valA); +} + +static int mt9m111_setup_rect(struct soc_camera_device *icd) +{ + struct mt9m111 *mt9m111 = container_of(icd, struct mt9m111, icd); + int ret = 0, is_raw_format; + int width = mt9m111->width; + int height = mt9m111->height; + + if ((mt9m111->pixfmt == V4L2_PIX_FMT_SBGGR8) + || (mt9m111->pixfmt == V4L2_PIX_FMT_SBGGR16)) + is_raw_format = 1; + else + is_raw_format = 0; + + if (ret >= 0) + ret = reg_write(COLUMN_START, mt9m111->left); + if (ret >= 0) + ret = reg_write(ROW_START, mt9m111->top); + + if (is_raw_format) { + if (ret >= 0) + ret = reg_write(WINDOW_WIDTH, width); + if (ret >= 0) + ret = reg_write(WINDOW_HEIGHT, height); + } else { + if (ret >= 0) + ret = reg_write(REDUCER_XZOOM_B, MT9M111_MAX_WIDTH); + if (ret >= 0) + ret = reg_write(REDUCER_YZOOM_B, MT9M111_MAX_HEIGHT); + if (ret >= 0) + ret = reg_write(REDUCER_XSIZE_B, width); + if (ret >= 0) + ret = reg_write(REDUCER_YSIZE_B, height); + if (ret >= 0) + ret = reg_write(REDUCER_XZOOM_A, MT9M111_MAX_WIDTH); + if (ret >= 0) + ret = reg_write(REDUCER_YZOOM_A, MT9M111_MAX_HEIGHT); + if (ret >= 0) + ret = reg_write(REDUCER_XSIZE_A, width); + if (ret >= 0) + ret = reg_write(REDUCER_YSIZE_A, height); + } + + return ret; +} + +static int mt9m111_setup_pixfmt(struct soc_camera_device *icd, u16 outfmt) +{ + int ret; + + ret = reg_write(OUTPUT_FORMAT_CTRL2_A, outfmt); + if (ret >= 0) + ret = reg_write(OUTPUT_FORMAT_CTRL2_B, outfmt); + return ret; +} + +static int mt9m111_setfmt_bayer8(struct soc_camera_device *icd) +{ + return mt9m111_setup_pixfmt(icd, MT9M111_OUTFMT_PROCESSED_BAYER); +} + +static int mt9m111_setfmt_bayer10(struct soc_camera_device *icd) +{ + + return mt9m111_setup_pixfmt(icd, MT9M111_OUTFMT_BYPASS_IFP); +} + +static int mt9m111_setfmt_rgb565(struct soc_camera_device *icd) +{ + struct mt9m111 *mt9m111 = container_of(icd, struct mt9m111, icd); + int val = 0; + + if (mt9m111->swap_rgb_red_blue) + val |= MT9M111_OUTFMT_SWAP_YCbCr_Cb_Cr; + if (mt9m111->swap_rgb_even_odd) + val |= MT9M111_OUTFMT_SWAP_RGB_EVEN; + val |= MT9M111_OUTFMT_RGB | MT9M111_OUTFMT_RGB565; + + return mt9m111_setup_pixfmt(icd, val); +} + +static int mt9m111_setfmt_rgb555(struct soc_camera_device *icd) +{ + struct mt9m111 *mt9m111 = container_of(icd, struct mt9m111, icd); + int val = 0; + + if (mt9m111->swap_rgb_red_blue) + val |= MT9M111_OUTFMT_SWAP_YCbCr_Cb_Cr; + if (mt9m111->swap_rgb_even_odd) + val |= MT9M111_OUTFMT_SWAP_RGB_EVEN; + val |= MT9M111_OUTFMT_RGB | MT9M111_OUTFMT_RGB555; + + return mt9m111_setup_pixfmt(icd, val); +} + +static int mt9m111_setfmt_yuv(struct soc_camera_device *icd) +{ + struct mt9m111 *mt9m111 = container_of(icd, struct mt9m111, icd); + int val = 0; + + if (mt9m111->swap_yuv_cb_cr) + val |= MT9M111_OUTFMT_SWAP_YCbCr_Cb_Cr; + if (mt9m111->swap_yuv_y_chromas) + val |= MT9M111_OUTFMT_SWAP_YCbCr_C_Y; + + return mt9m111_setup_pixfmt(icd, val); +} + +static int mt9m111_enable(struct soc_camera_device *icd) +{ + struct mt9m111 *mt9m111 = container_of(icd, struct mt9m111, icd); + int ret; + + ret = reg_set(RESET, MT9M111_RESET_CHIP_ENABLE); + if (ret >= 0) + mt9m111->powered = 1; + return ret; +} + +static int mt9m111_disable(struct soc_camera_device *icd) +{ + struct mt9m111 *mt9m111 = container_of(icd, struct mt9m111, icd); + int ret; + + ret = reg_clear(RESET, MT9M111_RESET_CHIP_ENABLE); + if (ret >= 0) + mt9m111->powered = 0; + return ret; +} + +static int mt9m111_reset(struct soc_camera_device *icd) +{ + int ret; + + ret = reg_set(RESET, MT9M111_RESET_RESET_MODE); + if (ret >= 0) + ret = reg_set(RESET, MT9M111_RESET_RESET_SOC); + if (ret >= 0) + ret = reg_clear(RESET, MT9M111_RESET_RESET_MODE + | MT9M111_RESET_RESET_SOC); + return ret; +} + +static int mt9m111_start_capture(struct soc_camera_device *icd) +{ + return 0; +} + +static int mt9m111_stop_capture(struct soc_camera_device *icd) +{ + return 0; +} + +static unsigned long mt9m111_query_bus_param(struct soc_camera_device *icd) +{ + return SOCAM_MASTER | SOCAM_PCLK_SAMPLE_RISING | + SOCAM_HSYNC_ACTIVE_HIGH | SOCAM_VSYNC_ACTIVE_HIGH | + SOCAM_DATAWIDTH_8; +} + +static int mt9m111_set_bus_param(struct soc_camera_device *icd, unsigned long f) +{ + return 0; +} + +static int mt9m111_set_pixfmt(struct soc_camera_device *icd, u32 pixfmt) +{ + struct mt9m111 *mt9m111 = container_of(icd, struct mt9m111, icd); + int ret = 0; + + switch (pixfmt) { + case V4L2_PIX_FMT_SBGGR8: + ret = mt9m111_setfmt_bayer8(icd); + break; + case V4L2_PIX_FMT_SBGGR16: + ret = mt9m111_setfmt_bayer10(icd); + break; + case V4L2_PIX_FMT_RGB555: + ret = mt9m111_setfmt_rgb555(icd); + break; + case V4L2_PIX_FMT_RGB565: + ret = mt9m111_setfmt_rgb565(icd); + break; + case V4L2_PIX_FMT_YUYV: + ret = mt9m111_setfmt_yuv(icd); + break; + default: + dev_err(&icd->dev, "Pixel format not handled : %x\n", pixfmt); + ret = -EINVAL; + } + + if (ret >= 0) + mt9m111->pixfmt = pixfmt; + + return ret; +} + +static int mt9m111_set_fmt_cap(struct soc_camera_device *icd, + __u32 pixfmt, struct v4l2_rect *rect) +{ + struct mt9m111 *mt9m111 = container_of(icd, struct mt9m111, icd); + int ret = 0; + + mt9m111->left = rect->left; + mt9m111->top = rect->top; + mt9m111->width = rect->width; + mt9m111->height = rect->height; + + dev_dbg(&icd->dev, "%s fmt=%x left=%d, top=%d, width=%d, height=%d\n", + __func__, pixfmt, mt9m111->left, mt9m111->top, mt9m111->width, + mt9m111->height); + + ret = mt9m111_setup_rect(icd); + if (ret >= 0) + ret = mt9m111_set_pixfmt(icd, pixfmt); + return ret < 0 ? ret : 0; +} + +static int mt9m111_try_fmt_cap(struct soc_camera_device *icd, + struct v4l2_format *f) +{ + if (f->fmt.pix.height > MT9M111_MAX_HEIGHT) + f->fmt.pix.height = MT9M111_MAX_HEIGHT; + if (f->fmt.pix.width > MT9M111_MAX_WIDTH) + f->fmt.pix.width = MT9M111_MAX_WIDTH; + + return 0; +} + +static int mt9m111_get_chip_id(struct soc_camera_device *icd, + struct v4l2_chip_ident *id) +{ + struct mt9m111 *mt9m111 = container_of(icd, struct mt9m111, icd); + + if (id->match_type != V4L2_CHIP_MATCH_I2C_ADDR) + return -EINVAL; + + if (id->match_chip != mt9m111->client->addr) + return -ENODEV; + + id->ident = mt9m111->model; + id->revision = 0; + + return 0; +} + +#ifdef CONFIG_VIDEO_ADV_DEBUG +static int mt9m111_get_register(struct soc_camera_device *icd, + struct v4l2_register *reg) +{ + int val; + + struct mt9m111 *mt9m111 = container_of(icd, struct mt9m111, icd); + + if (reg->match_type != V4L2_CHIP_MATCH_I2C_ADDR || reg->reg > 0x2ff) + return -EINVAL; + if (reg->match_chip != mt9m111->client->addr) + return -ENODEV; + + val = mt9m111_reg_read(icd, reg->reg); + reg->val = (u64)val; + + if (reg->val > 0xffff) + return -EIO; + + return 0; +} + +static int mt9m111_set_register(struct soc_camera_device *icd, + struct v4l2_register *reg) +{ + struct mt9m111 *mt9m111 = container_of(icd, struct mt9m111, icd); + + if (reg->match_type != V4L2_CHIP_MATCH_I2C_ADDR || reg->reg > 0x2ff) + return -EINVAL; + + if (reg->match_chip != mt9m111->client->addr) + return -ENODEV; + + if (mt9m111_reg_write(icd, reg->reg, reg->val) < 0) + return -EIO; + + return 0; +} +#endif + +static const struct v4l2_queryctrl mt9m111_controls[] = { + { + .id = V4L2_CID_VFLIP, + .type = V4L2_CTRL_TYPE_BOOLEAN, + .name = "Flip Verticaly", + .minimum = 0, + .maximum = 1, + .step = 1, + .default_value = 0, + }, { + .id = V4L2_CID_HFLIP, + .type = V4L2_CTRL_TYPE_BOOLEAN, + .name = "Flip Horizontaly", + .minimum = 0, + .maximum = 1, + .step = 1, + .default_value = 0, + }, { /* gain = 1/32*val (=>gain=1 if val==32) */ + .id = V4L2_CID_GAIN, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "Gain", + .minimum = 0, + .maximum = 63 * 2 * 2, + .step = 1, + .default_value = 32, + .flags = V4L2_CTRL_FLAG_SLIDER, + }, { + .id = V4L2_CID_EXPOSURE_AUTO, + .type = V4L2_CTRL_TYPE_BOOLEAN, + .name = "Auto Exposure", + .minimum = 0, + .maximum = 1, + .step = 1, + .default_value = 1, + } +}; + +static int mt9m111_video_probe(struct soc_camera_device *); +static void mt9m111_video_remove(struct soc_camera_device *); +static int mt9m111_get_control(struct soc_camera_device *, + struct v4l2_control *); +static int mt9m111_set_control(struct soc_camera_device *, + struct v4l2_control *); +static int mt9m111_resume(struct soc_camera_device *icd); +static int mt9m111_init(struct soc_camera_device *icd); +static int mt9m111_release(struct soc_camera_device *icd); + +static struct soc_camera_ops mt9m111_ops = { + .owner = THIS_MODULE, + .probe = mt9m111_video_probe, + .remove = mt9m111_video_remove, + .init = mt9m111_init, + .resume = mt9m111_resume, + .release = mt9m111_release, + .start_capture = mt9m111_start_capture, + .stop_capture = mt9m111_stop_capture, + .set_fmt_cap = mt9m111_set_fmt_cap, + .try_fmt_cap = mt9m111_try_fmt_cap, + .query_bus_param = mt9m111_query_bus_param, + .set_bus_param = mt9m111_set_bus_param, + .controls = mt9m111_controls, + .num_controls = ARRAY_SIZE(mt9m111_controls), + .get_control = mt9m111_get_control, + .set_control = mt9m111_set_control, + .get_chip_id = mt9m111_get_chip_id, +#ifdef CONFIG_VIDEO_ADV_DEBUG + .get_register = mt9m111_get_register, + .set_register = mt9m111_set_register, +#endif +}; + +static int mt9m111_set_flip(struct soc_camera_device *icd, int flip, int mask) +{ + struct mt9m111 *mt9m111 = container_of(icd, struct mt9m111, icd); + int ret; + + if (mt9m111->context == HIGHPOWER) { + if (flip) + ret = reg_set(READ_MODE_B, mask); + else + ret = reg_clear(READ_MODE_B, mask); + } else { + if (flip) + ret = reg_set(READ_MODE_A, mask); + else + ret = reg_clear(READ_MODE_A, mask); + } + + return ret; +} + +static int mt9m111_get_global_gain(struct soc_camera_device *icd) +{ + unsigned int data, gain; + + data = reg_read(GLOBAL_GAIN); + if (data >= 0) + gain = ((data & (1 << 10)) * 2) + | ((data & (1 << 9)) * 2) + | (data & 0x2f); + else + gain = data; + + return gain; +} +static int mt9m111_set_global_gain(struct soc_camera_device *icd, int gain) +{ + u16 val; + + if (gain > 63 * 2 * 2) + return -EINVAL; + + icd->gain = gain; + if ((gain >= 64 * 2) && (gain < 63 * 2 * 2)) + val = (1 << 10) | (1 << 9) | (gain / 4); + else if ((gain >= 64) && (gain < 64 * 2)) + val = (1<<9) | (gain / 2); + else + val = gain; + + return reg_write(GLOBAL_GAIN, val); +} + +static int mt9m111_set_autoexposure(struct soc_camera_device *icd, int on) +{ + struct mt9m111 *mt9m111 = container_of(icd, struct mt9m111, icd); + int ret; + + if (on) + ret = reg_set(OPER_MODE_CTRL, MT9M111_OPMODE_AUTOEXPO_EN); + else + ret = reg_clear(OPER_MODE_CTRL, MT9M111_OPMODE_AUTOEXPO_EN); + + if (ret >= 0) + mt9m111->autoexposure = on; + + return ret; +} +static int mt9m111_get_control(struct soc_camera_device *icd, + struct v4l2_control *ctrl) +{ + struct mt9m111 *mt9m111 = container_of(icd, struct mt9m111, icd); + int data; + + switch (ctrl->id) { + case V4L2_CID_VFLIP: + if (mt9m111->context == HIGHPOWER) + data = reg_read(READ_MODE_B); + else + data = reg_read(READ_MODE_A); + + if (data < 0) + return -EIO; + ctrl->value = !!(data & MT9M111_RMB_MIRROR_ROWS); + break; + case V4L2_CID_HFLIP: + if (mt9m111->context == HIGHPOWER) + data = reg_read(READ_MODE_B); + else + data = reg_read(READ_MODE_A); + + if (data < 0) + return -EIO; + ctrl->value = !!(data & MT9M111_RMB_MIRROR_COLS); + break; + case V4L2_CID_GAIN: + data = mt9m111_get_global_gain(icd); + if (data < 0) + return data; + ctrl->value = data; + break; + case V4L2_CID_EXPOSURE_AUTO: + ctrl->value = mt9m111->autoexposure; + break; + } + return 0; +} + +static int mt9m111_set_control(struct soc_camera_device *icd, + struct v4l2_control *ctrl) +{ + struct mt9m111 *mt9m111 = container_of(icd, struct mt9m111, icd); + const struct v4l2_queryctrl *qctrl; + int ret = 0; + + qctrl = soc_camera_find_qctrl(&mt9m111_ops, ctrl->id); + + if (!qctrl) + return -EINVAL; + + switch (ctrl->id) { + case V4L2_CID_VFLIP: + mt9m111->vflip = ctrl->value; + ret = mt9m111_set_flip(icd, ctrl->value, + MT9M111_RMB_MIRROR_ROWS); + break; + case V4L2_CID_HFLIP: + mt9m111->hflip = ctrl->value; + ret = mt9m111_set_flip(icd, ctrl->value, + MT9M111_RMB_MIRROR_COLS); + break; + case V4L2_CID_GAIN: + ret = mt9m111_set_global_gain(icd, ctrl->value); + break; + case V4L2_CID_EXPOSURE_AUTO: + ret = mt9m111_set_autoexposure(icd, ctrl->value); + break; + default: + ret = -EINVAL; + } + + return ret < 0 ? -EIO : 0; +} + +int mt9m111_restore_state(struct soc_camera_device *icd) +{ + struct mt9m111 *mt9m111 = container_of(icd, struct mt9m111, icd); + + mt9m111_set_context(icd, mt9m111->context); + mt9m111_set_pixfmt(icd, mt9m111->pixfmt); + mt9m111_setup_rect(icd); + mt9m111_set_flip(icd, mt9m111->hflip, MT9M111_RMB_MIRROR_COLS); + mt9m111_set_flip(icd, mt9m111->vflip, MT9M111_RMB_MIRROR_ROWS); + mt9m111_set_global_gain(icd, icd->gain); + mt9m111_set_autoexposure(icd, mt9m111->autoexposure); + return 0; +} + +static int mt9m111_resume(struct soc_camera_device *icd) +{ + struct mt9m111 *mt9m111 = container_of(icd, struct mt9m111, icd); + int ret = 0; + + if (mt9m111->powered) { + ret = mt9m111_enable(icd); + if (ret >= 0) + mt9m111_reset(icd); + if (ret >= 0) + mt9m111_restore_state(icd); + } + return ret; +} + +static int mt9m111_init(struct soc_camera_device *icd) +{ + struct mt9m111 *mt9m111 = container_of(icd, struct mt9m111, icd); + int ret; + + mt9m111->context = HIGHPOWER; + ret = mt9m111_enable(icd); + if (ret >= 0) + mt9m111_reset(icd); + if (ret >= 0) + mt9m111_set_context(icd, mt9m111->context); + if (ret >= 0) + mt9m111_set_autoexposure(icd, mt9m111->autoexposure); + if (ret < 0) + dev_err(&icd->dev, "mt9m111 init failed: %d\n", ret); + return ret ? -EIO : 0; +} + +static int mt9m111_release(struct soc_camera_device *icd) +{ + int ret; + + ret = mt9m111_disable(icd); + if (ret < 0) + dev_err(&icd->dev, "mt9m111 release failed: %d\n", ret); + + return ret ? -EIO : 0; +} + +/* + * Interface active, can use i2c. If it fails, it can indeed mean, that + * this wasn't our capture interface, so, we wait for the right one + */ +static int mt9m111_video_probe(struct soc_camera_device *icd) +{ + struct mt9m111 *mt9m111 = container_of(icd, struct mt9m111, icd); + s32 data; + int ret; + + /* + * We must have a parent by now. And it cannot be a wrong one. + * So this entire test is completely redundant. + */ + if (!icd->dev.parent || + to_soc_camera_host(icd->dev.parent)->nr != icd->iface) + return -ENODEV; + + ret = mt9m111_enable(icd); + if (ret) + goto ei2c; + ret = mt9m111_reset(icd); + if (ret) + goto ei2c; + + data = reg_read(CHIP_VERSION); + + switch (data) { + case 0x143a: + mt9m111->model = V4L2_IDENT_MT9M111; + icd->formats = mt9m111_colour_formats; + icd->num_formats = ARRAY_SIZE(mt9m111_colour_formats); + break; + default: + ret = -ENODEV; + dev_err(&icd->dev, + "No MT9M111 chip detected, register read %x\n", data); + goto ei2c; + } + + dev_info(&icd->dev, "Detected a MT9M111 chip ID 0x143a\n"); + + ret = soc_camera_video_start(icd); + if (ret) + goto eisis; + + mt9m111->autoexposure = 1; + + mt9m111->swap_rgb_even_odd = 1; + mt9m111->swap_rgb_red_blue = 1; + + return 0; +eisis: +ei2c: + return ret; +} + +static void mt9m111_video_remove(struct soc_camera_device *icd) +{ + struct mt9m111 *mt9m111 = container_of(icd, struct mt9m111, icd); + + dev_dbg(&icd->dev, "Video %x removed: %p, %p\n", mt9m111->client->addr, + mt9m111->icd.dev.parent, mt9m111->icd.vdev); + soc_camera_video_stop(&mt9m111->icd); +} + +static int mt9m111_probe(struct i2c_client *client, + const struct i2c_device_id *did) +{ + struct mt9m111 *mt9m111; + struct soc_camera_device *icd; + struct i2c_adapter *adapter = to_i2c_adapter(client->dev.parent); + struct soc_camera_link *icl = client->dev.platform_data; + int ret; + + if (!icl) { + dev_err(&client->dev, "MT9M111 driver needs platform data\n"); + return -EINVAL; + } + + if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_WORD_DATA)) { + dev_warn(&adapter->dev, + "I2C-Adapter doesn't support I2C_FUNC_SMBUS_WORD\n"); + return -EIO; + } + + mt9m111 = kzalloc(sizeof(struct mt9m111), GFP_KERNEL); + if (!mt9m111) + return -ENOMEM; + + mt9m111->client = client; + i2c_set_clientdata(client, mt9m111); + + /* Second stage probe - when a capture adapter is there */ + icd = &mt9m111->icd; + icd->ops = &mt9m111_ops; + icd->control = &client->dev; + icd->x_min = MT9M111_MIN_DARK_COLS; + icd->y_min = MT9M111_MIN_DARK_ROWS; + icd->x_current = icd->x_min; + icd->y_current = icd->y_min; + icd->width_min = MT9M111_MIN_DARK_ROWS; + icd->width_max = MT9M111_MAX_WIDTH; + icd->height_min = MT9M111_MIN_DARK_COLS; + icd->height_max = MT9M111_MAX_HEIGHT; + icd->y_skip_top = 0; + icd->iface = icl->bus_id; + + ret = soc_camera_device_register(icd); + if (ret) + goto eisdr; + return 0; + +eisdr: + kfree(mt9m111); + return ret; +} + +static int mt9m111_remove(struct i2c_client *client) +{ + struct mt9m111 *mt9m111 = i2c_get_clientdata(client); + soc_camera_device_unregister(&mt9m111->icd); + kfree(mt9m111); + + return 0; +} + +static const struct i2c_device_id mt9m111_id[] = { + { "mt9m111", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, mt9m111_id); + +static struct i2c_driver mt9m111_i2c_driver = { + .driver = { + .name = "mt9m111", + }, + .probe = mt9m111_probe, + .remove = mt9m111_remove, + .id_table = mt9m111_id, +}; + +static int __init mt9m111_mod_init(void) +{ + return i2c_add_driver(&mt9m111_i2c_driver); +} + +static void __exit mt9m111_mod_exit(void) +{ + i2c_del_driver(&mt9m111_i2c_driver); +} + +module_init(mt9m111_mod_init); +module_exit(mt9m111_mod_exit); + +MODULE_DESCRIPTION("Micron MT9M111 Camera driver"); +MODULE_AUTHOR("Robert Jarzmik"); +MODULE_LICENSE("GPL"); -- cgit v0.10.2 From 112116410aaab5310a9a279c71fb76605236e448 Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Thu, 14 Aug 2008 12:03:18 -0300 Subject: V4L/DVB (8685): mt9m001, mt9v022: Simplify return code checking i2c_smbus_write_word_data() returns 0 or a negative error, hence no need to check for "> 0". Signed-off-by: Guennadi Liakhovetski Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/mt9m001.c b/drivers/media/video/mt9m001.c index 554d229..3531f93 100644 --- a/drivers/media/video/mt9m001.c +++ b/drivers/media/video/mt9m001.c @@ -119,16 +119,16 @@ static int mt9m001_init(struct soc_camera_device *icd) { int ret; - /* Disable chip, synchronous option update */ dev_dbg(icd->vdev->parent, "%s\n", __func__); ret = reg_write(icd, MT9M001_RESET, 1); - if (ret >= 0) + if (!ret) ret = reg_write(icd, MT9M001_RESET, 0); - if (ret >= 0) + /* Disable chip, synchronous option update */ + if (!ret) ret = reg_write(icd, MT9M001_OUTPUT_CONTROL, 0); - return ret >= 0 ? 0 : -EIO; + return ret; } static int mt9m001_release(struct soc_camera_device *icd) @@ -267,24 +267,24 @@ static int mt9m001_set_fmt_cap(struct soc_camera_device *icd, /* Blanking and start values - default... */ ret = reg_write(icd, MT9M001_HORIZONTAL_BLANKING, hblank); - if (ret >= 0) + if (!ret) ret = reg_write(icd, MT9M001_VERTICAL_BLANKING, vblank); /* The caller provides a supported format, as verified per * call to icd->try_fmt_cap() */ - if (ret >= 0) + if (!ret) ret = reg_write(icd, MT9M001_COLUMN_START, rect->left); - if (ret >= 0) + if (!ret) ret = reg_write(icd, MT9M001_ROW_START, rect->top); - if (ret >= 0) + if (!ret) ret = reg_write(icd, MT9M001_WINDOW_WIDTH, rect->width - 1); - if (ret >= 0) + if (!ret) ret = reg_write(icd, MT9M001_WINDOW_HEIGHT, rect->height + icd->y_skip_top - 1); - if (ret >= 0 && mt9m001->autoexposure) { + if (!ret && mt9m001->autoexposure) { ret = reg_write(icd, MT9M001_SHUTTER_WIDTH, rect->height + icd->y_skip_top + vblank); - if (ret >= 0) { + if (!ret) { const struct v4l2_queryctrl *qctrl = soc_camera_find_qctrl(icd->ops, V4L2_CID_EXPOSURE); @@ -295,7 +295,7 @@ static int mt9m001_set_fmt_cap(struct soc_camera_device *icd, } } - return ret < 0 ? ret : 0; + return ret; } static int mt9m001_try_fmt_cap(struct soc_camera_device *icd, diff --git a/drivers/media/video/mt9v022.c b/drivers/media/video/mt9v022.c index 56808cd..0f4b204 100644 --- a/drivers/media/video/mt9v022.c +++ b/drivers/media/video/mt9v022.c @@ -141,22 +141,22 @@ static int mt9v022_init(struct soc_camera_device *icd) * plus snapshot mode to disable scan for now */ mt9v022->chip_control |= 0x10; ret = reg_write(icd, MT9V022_CHIP_CONTROL, mt9v022->chip_control); - if (ret >= 0) - reg_write(icd, MT9V022_READ_MODE, 0x300); + if (!ret) + ret = reg_write(icd, MT9V022_READ_MODE, 0x300); /* All defaults */ - if (ret >= 0) + if (!ret) /* AEC, AGC on */ ret = reg_set(icd, MT9V022_AEC_AGC_ENABLE, 0x3); - if (ret >= 0) + if (!ret) ret = reg_write(icd, MT9V022_MAX_TOTAL_SHUTTER_WIDTH, 480); - if (ret >= 0) + if (!ret) /* default - auto */ ret = reg_clear(icd, MT9V022_BLACK_LEVEL_CALIB_CTRL, 1); - if (ret >= 0) + if (!ret) ret = reg_write(icd, MT9V022_DIGITAL_TEST_PATTERN, 0); - return ret >= 0 ? 0 : -EIO; + return ret; } static int mt9v022_release(struct soc_camera_device *icd) @@ -352,21 +352,21 @@ static int mt9v022_set_fmt_cap(struct soc_camera_device *icd, rect->height + icd->y_skip_top + 43); } /* Setup frame format: defaults apart from width and height */ - if (ret >= 0) + if (!ret) ret = reg_write(icd, MT9V022_COLUMN_START, rect->left); - if (ret >= 0) + if (!ret) ret = reg_write(icd, MT9V022_ROW_START, rect->top); - if (ret >= 0) + if (!ret) /* Default 94, Phytec driver says: * "width + horizontal blank >= 660" */ ret = reg_write(icd, MT9V022_HORIZONTAL_BLANKING, rect->width > 660 - 43 ? 43 : 660 - rect->width); - if (ret >= 0) + if (!ret) ret = reg_write(icd, MT9V022_VERTICAL_BLANKING, 45); - if (ret >= 0) + if (!ret) ret = reg_write(icd, MT9V022_WINDOW_WIDTH, rect->width); - if (ret >= 0) + if (!ret) ret = reg_write(icd, MT9V022_WINDOW_HEIGHT, rect->height + icd->y_skip_top); @@ -717,7 +717,7 @@ static int mt9v022_video_probe(struct soc_camera_device *icd) icd->num_formats = 1; } - if (ret >= 0) + if (!ret) ret = soc_camera_video_start(icd); if (ret < 0) goto eisis; -- cgit v0.10.2 From 506c629a8eb95a3232a0aafa3b80903224ccc461 Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Thu, 14 Aug 2008 12:03:49 -0300 Subject: V4L/DVB (8686): mt9m111: style cleanup Fix a typo in Kconfig, simplify error checking, further minor cleanup. Tested-by: Robert Jarzmik Signed-off-by: Guennadi Liakhovetski Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig index 6ebe9f1..37123ff 100644 --- a/drivers/media/video/Kconfig +++ b/drivers/media/video/Kconfig @@ -810,7 +810,7 @@ config MT9M001_PCA9536_SWITCH extender to switch between 8 and 10 bit datawidth modes config SOC_CAMERA_MT9M111 - tristate "mt9m001 support" + tristate "mt9m111 support" depends on SOC_CAMERA && I2C help This driver supports MT9M111 cameras from Micron diff --git a/drivers/media/video/mt9m111.c b/drivers/media/video/mt9m111.c index 0c88e5d..d999326 100644 --- a/drivers/media/video/mt9m111.c +++ b/drivers/media/video/mt9m111.c @@ -173,7 +173,7 @@ static int reg_page_map_set(struct i2c_client *client, const u16 reg) return -EINVAL; ret = i2c_smbus_write_word_data(client, MT9M111_PAGE_MAP, swab16(page)); - if (ret >= 0) + if (!ret) lastpage = page; return ret; } @@ -200,7 +200,7 @@ static int mt9m111_reg_write(struct soc_camera_device *icd, const u16 reg, int ret; ret = reg_page_map_set(client, reg); - if (ret >= 0) + if (!ret) ret = i2c_smbus_write_word_data(mt9m111->client, (reg & 0xff), swab16(data)); dev_dbg(&icd->dev, "write reg.%03x = %04x -> %d\n", reg, data, ret); @@ -246,7 +246,7 @@ static int mt9m111_set_context(struct soc_camera_device *icd, static int mt9m111_setup_rect(struct soc_camera_device *icd) { struct mt9m111 *mt9m111 = container_of(icd, struct mt9m111, icd); - int ret = 0, is_raw_format; + int ret, is_raw_format; int width = mt9m111->width; int height = mt9m111->height; @@ -256,32 +256,31 @@ static int mt9m111_setup_rect(struct soc_camera_device *icd) else is_raw_format = 0; - if (ret >= 0) - ret = reg_write(COLUMN_START, mt9m111->left); - if (ret >= 0) + ret = reg_write(COLUMN_START, mt9m111->left); + if (!ret) ret = reg_write(ROW_START, mt9m111->top); if (is_raw_format) { - if (ret >= 0) + if (!ret) ret = reg_write(WINDOW_WIDTH, width); - if (ret >= 0) + if (!ret) ret = reg_write(WINDOW_HEIGHT, height); } else { - if (ret >= 0) + if (!ret) ret = reg_write(REDUCER_XZOOM_B, MT9M111_MAX_WIDTH); - if (ret >= 0) + if (!ret) ret = reg_write(REDUCER_YZOOM_B, MT9M111_MAX_HEIGHT); - if (ret >= 0) + if (!ret) ret = reg_write(REDUCER_XSIZE_B, width); - if (ret >= 0) + if (!ret) ret = reg_write(REDUCER_YSIZE_B, height); - if (ret >= 0) + if (!ret) ret = reg_write(REDUCER_XZOOM_A, MT9M111_MAX_WIDTH); - if (ret >= 0) + if (!ret) ret = reg_write(REDUCER_YZOOM_A, MT9M111_MAX_HEIGHT); - if (ret >= 0) + if (!ret) ret = reg_write(REDUCER_XSIZE_A, width); - if (ret >= 0) + if (!ret) ret = reg_write(REDUCER_YSIZE_A, height); } @@ -293,7 +292,7 @@ static int mt9m111_setup_pixfmt(struct soc_camera_device *icd, u16 outfmt) int ret; ret = reg_write(OUTPUT_FORMAT_CTRL2_A, outfmt); - if (ret >= 0) + if (!ret) ret = reg_write(OUTPUT_FORMAT_CTRL2_B, outfmt); return ret; } @@ -305,7 +304,6 @@ static int mt9m111_setfmt_bayer8(struct soc_camera_device *icd) static int mt9m111_setfmt_bayer10(struct soc_camera_device *icd) { - return mt9m111_setup_pixfmt(icd, MT9M111_OUTFMT_BYPASS_IFP); } @@ -356,7 +354,7 @@ static int mt9m111_enable(struct soc_camera_device *icd) int ret; ret = reg_set(RESET, MT9M111_RESET_CHIP_ENABLE); - if (ret >= 0) + if (!ret) mt9m111->powered = 1; return ret; } @@ -367,7 +365,7 @@ static int mt9m111_disable(struct soc_camera_device *icd) int ret; ret = reg_clear(RESET, MT9M111_RESET_CHIP_ENABLE); - if (ret >= 0) + if (!ret) mt9m111->powered = 0; return ret; } @@ -377,9 +375,9 @@ static int mt9m111_reset(struct soc_camera_device *icd) int ret; ret = reg_set(RESET, MT9M111_RESET_RESET_MODE); - if (ret >= 0) + if (!ret) ret = reg_set(RESET, MT9M111_RESET_RESET_SOC); - if (ret >= 0) + if (!ret) ret = reg_clear(RESET, MT9M111_RESET_RESET_MODE | MT9M111_RESET_RESET_SOC); return ret; @@ -410,7 +408,7 @@ static int mt9m111_set_bus_param(struct soc_camera_device *icd, unsigned long f) static int mt9m111_set_pixfmt(struct soc_camera_device *icd, u32 pixfmt) { struct mt9m111 *mt9m111 = container_of(icd, struct mt9m111, icd); - int ret = 0; + int ret; switch (pixfmt) { case V4L2_PIX_FMT_SBGGR8: @@ -433,7 +431,7 @@ static int mt9m111_set_pixfmt(struct soc_camera_device *icd, u32 pixfmt) ret = -EINVAL; } - if (ret >= 0) + if (!ret) mt9m111->pixfmt = pixfmt; return ret; @@ -443,7 +441,7 @@ static int mt9m111_set_fmt_cap(struct soc_camera_device *icd, __u32 pixfmt, struct v4l2_rect *rect) { struct mt9m111 *mt9m111 = container_of(icd, struct mt9m111, icd); - int ret = 0; + int ret; mt9m111->left = rect->left; mt9m111->top = rect->top; @@ -455,9 +453,9 @@ static int mt9m111_set_fmt_cap(struct soc_camera_device *icd, mt9m111->height); ret = mt9m111_setup_rect(icd); - if (ret >= 0) + if (!ret) ret = mt9m111_set_pixfmt(icd, pixfmt); - return ret < 0 ? ret : 0; + return ret; } static int mt9m111_try_fmt_cap(struct soc_camera_device *icd, @@ -644,7 +642,7 @@ static int mt9m111_set_global_gain(struct soc_camera_device *icd, int gain) if ((gain >= 64 * 2) && (gain < 63 * 2 * 2)) val = (1 << 10) | (1 << 9) | (gain / 4); else if ((gain >= 64) && (gain < 64 * 2)) - val = (1<<9) | (gain / 2); + val = (1 << 9) | (gain / 2); else val = gain; @@ -661,7 +659,7 @@ static int mt9m111_set_autoexposure(struct soc_camera_device *icd, int on) else ret = reg_clear(OPER_MODE_CTRL, MT9M111_OPMODE_AUTOEXPO_EN); - if (ret >= 0) + if (!ret) mt9m111->autoexposure = on; return ret; @@ -711,7 +709,7 @@ static int mt9m111_set_control(struct soc_camera_device *icd, { struct mt9m111 *mt9m111 = container_of(icd, struct mt9m111, icd); const struct v4l2_queryctrl *qctrl; - int ret = 0; + int ret; qctrl = soc_camera_find_qctrl(&mt9m111_ops, ctrl->id); @@ -739,7 +737,7 @@ static int mt9m111_set_control(struct soc_camera_device *icd, ret = -EINVAL; } - return ret < 0 ? -EIO : 0; + return ret; } int mt9m111_restore_state(struct soc_camera_device *icd) @@ -763,10 +761,10 @@ static int mt9m111_resume(struct soc_camera_device *icd) if (mt9m111->powered) { ret = mt9m111_enable(icd); - if (ret >= 0) - mt9m111_reset(icd); - if (ret >= 0) - mt9m111_restore_state(icd); + if (!ret) + ret = mt9m111_reset(icd); + if (!ret) + ret = mt9m111_restore_state(icd); } return ret; } @@ -778,15 +776,15 @@ static int mt9m111_init(struct soc_camera_device *icd) mt9m111->context = HIGHPOWER; ret = mt9m111_enable(icd); - if (ret >= 0) - mt9m111_reset(icd); - if (ret >= 0) - mt9m111_set_context(icd, mt9m111->context); - if (ret >= 0) - mt9m111_set_autoexposure(icd, mt9m111->autoexposure); - if (ret < 0) + if (!ret) + ret = mt9m111_reset(icd); + if (!ret) + ret = mt9m111_set_context(icd, mt9m111->context); + if (!ret) + ret = mt9m111_set_autoexposure(icd, mt9m111->autoexposure); + if (ret) dev_err(&icd->dev, "mt9m111 init failed: %d\n", ret); - return ret ? -EIO : 0; + return ret; } static int mt9m111_release(struct soc_camera_device *icd) @@ -797,7 +795,7 @@ static int mt9m111_release(struct soc_camera_device *icd) if (ret < 0) dev_err(&icd->dev, "mt9m111 release failed: %d\n", ret); - return ret ? -EIO : 0; + return ret; } /* -- cgit v0.10.2 From 81034663159f39d005316b5c139038459cd16721 Mon Sep 17 00:00:00 2001 From: Stefan Herbrechtsmeier Date: Thu, 14 Aug 2008 12:04:11 -0300 Subject: V4L/DVB (8687): soc-camera: Move .power and .reset from soc_camera host to sensor driver Make .power and .reset callbacks per camera instead of per host, also move their invocation to camera drivers. .arch/arm/mach-pxa/include/mach/camera.h | 2 - Signed-off-by: Stefan Herbrechtsmeier Signed-off-by: Guennadi Liakhovetski Signed-off-by: Mauro Carvalho Chehab diff --git a/arch/arm/mach-pxa/include/mach/camera.h b/arch/arm/mach-pxa/include/mach/camera.h index 39516ce..31abe6d 100644 --- a/arch/arm/mach-pxa/include/mach/camera.h +++ b/arch/arm/mach-pxa/include/mach/camera.h @@ -36,8 +36,6 @@ struct pxacamera_platform_data { int (*init)(struct device *); - int (*power)(struct device *, int); - int (*reset)(struct device *, int); unsigned long flags; unsigned long mclk_10khz; diff --git a/drivers/media/video/mt9m001.c b/drivers/media/video/mt9m001.c index 3531f93..0c52437 100644 --- a/drivers/media/video/mt9m001.c +++ b/drivers/media/video/mt9m001.c @@ -117,13 +117,33 @@ static int reg_clear(struct soc_camera_device *icd, const u8 reg, static int mt9m001_init(struct soc_camera_device *icd) { + struct mt9m001 *mt9m001 = container_of(icd, struct mt9m001, icd); + struct soc_camera_link *icl = mt9m001->client->dev.platform_data; int ret; dev_dbg(icd->vdev->parent, "%s\n", __func__); - ret = reg_write(icd, MT9M001_RESET, 1); - if (!ret) - ret = reg_write(icd, MT9M001_RESET, 0); + if (icl->power) { + ret = icl->power(&mt9m001->client->dev, 1); + if (ret < 0) { + dev_err(icd->vdev->parent, + "Platform failed to power-on the camera.\n"); + return ret; + } + } + + /* The camera could have been already on, we reset it additionally */ + if (icl->reset) + ret = icl->reset(&mt9m001->client->dev); + else + ret = -ENODEV; + + if (ret < 0) { + /* Either no platform reset, or platform reset failed */ + ret = reg_write(icd, MT9M001_RESET, 1); + if (!ret) + ret = reg_write(icd, MT9M001_RESET, 0); + } /* Disable chip, synchronous option update */ if (!ret) ret = reg_write(icd, MT9M001_OUTPUT_CONTROL, 0); @@ -133,8 +153,15 @@ static int mt9m001_init(struct soc_camera_device *icd) static int mt9m001_release(struct soc_camera_device *icd) { + struct mt9m001 *mt9m001 = container_of(icd, struct mt9m001, icd); + struct soc_camera_link *icl = mt9m001->client->dev.platform_data; + /* Disable the chip */ reg_write(icd, MT9M001_OUTPUT_CONTROL, 0); + + if (icl->power) + icl->power(&mt9m001->client->dev, 0); + return 0; } diff --git a/drivers/media/video/mt9m111.c b/drivers/media/video/mt9m111.c index d999326..4844486 100644 --- a/drivers/media/video/mt9m111.c +++ b/drivers/media/video/mt9m111.c @@ -351,8 +351,18 @@ static int mt9m111_setfmt_yuv(struct soc_camera_device *icd) static int mt9m111_enable(struct soc_camera_device *icd) { struct mt9m111 *mt9m111 = container_of(icd, struct mt9m111, icd); + struct soc_camera_link *icl = mt9m111->client->dev.platform_data; int ret; + if (icl->power) { + ret = icl->power(&mt9m111->client->dev, 1); + if (ret < 0) { + dev_err(icd->vdev->parent, + "Platform failed to power-on the camera.\n"); + return ret; + } + } + ret = reg_set(RESET, MT9M111_RESET_CHIP_ENABLE); if (!ret) mt9m111->powered = 1; @@ -362,11 +372,16 @@ static int mt9m111_enable(struct soc_camera_device *icd) static int mt9m111_disable(struct soc_camera_device *icd) { struct mt9m111 *mt9m111 = container_of(icd, struct mt9m111, icd); + struct soc_camera_link *icl = mt9m111->client->dev.platform_data; int ret; ret = reg_clear(RESET, MT9M111_RESET_CHIP_ENABLE); if (!ret) mt9m111->powered = 0; + + if (icl->power) + icl->power(&mt9m111->client->dev, 0); + return ret; } diff --git a/drivers/media/video/mt9v022.c b/drivers/media/video/mt9v022.c index 0f4b204..2584201 100644 --- a/drivers/media/video/mt9v022.c +++ b/drivers/media/video/mt9v022.c @@ -134,8 +134,25 @@ static int reg_clear(struct soc_camera_device *icd, const u8 reg, static int mt9v022_init(struct soc_camera_device *icd) { struct mt9v022 *mt9v022 = container_of(icd, struct mt9v022, icd); + struct soc_camera_link *icl = mt9v022->client->dev.platform_data; int ret; + if (icl->power) { + ret = icl->power(&mt9v022->client->dev, 1); + if (ret < 0) { + dev_err(icd->vdev->parent, + "Platform failed to power-on the camera.\n"); + return ret; + } + } + + /* + * The camera could have been already on, we hard-reset it additionally, + * if available. Soft reset is done in video_probe(). + */ + if (icl->reset) + icl->reset(&mt9v022->client->dev); + /* Almost the default mode: master, parallel, simultaneous, and an * undocumented bit 0x200, which is present in table 7, but not in 8, * plus snapshot mode to disable scan for now */ @@ -161,7 +178,12 @@ static int mt9v022_init(struct soc_camera_device *icd) static int mt9v022_release(struct soc_camera_device *icd) { - /* Nothing? */ + struct mt9v022 *mt9v022 = container_of(icd, struct mt9v022, icd); + struct soc_camera_link *icl = mt9v022->client->dev.platform_data; + + if (icl->power) + icl->power(&mt9v022->client->dev, 0); + return 0; } diff --git a/drivers/media/video/pxa_camera.c b/drivers/media/video/pxa_camera.c index cf96b2c..14569b5 100644 --- a/drivers/media/video/pxa_camera.c +++ b/drivers/media/video/pxa_camera.c @@ -629,17 +629,6 @@ static void pxa_camera_activate(struct pxa_camera_dev *pcdev) pdata->init(pcdev->dev); } - if (pdata && pdata->power) { - dev_dbg(pcdev->dev, "%s: Power on camera\n", __func__); - pdata->power(pcdev->dev, 1); - } - - if (pdata && pdata->reset) { - dev_dbg(pcdev->dev, "%s: Releasing camera reset\n", - __func__); - pdata->reset(pcdev->dev, 1); - } - CICR0 = 0x3FF; /* disable all interrupts */ if (pcdev->platform_flags & PXA_CAMERA_PCLK_EN) @@ -660,20 +649,7 @@ static void pxa_camera_activate(struct pxa_camera_dev *pcdev) static void pxa_camera_deactivate(struct pxa_camera_dev *pcdev) { - struct pxacamera_platform_data *board = pcdev->pdata; - clk_disable(pcdev->clk); - - if (board && board->reset) { - dev_dbg(pcdev->dev, "%s: Asserting camera reset\n", - __func__); - board->reset(pcdev->dev, 0); - } - - if (board && board->power) { - dev_dbg(pcdev->dev, "%s: Power off camera\n", __func__); - board->power(pcdev->dev, 0); - } } static irqreturn_t pxa_camera_irq(int irq, void *data) diff --git a/drivers/media/video/sh_mobile_ceu_camera.c b/drivers/media/video/sh_mobile_ceu_camera.c index 318754e..7683809 100644 --- a/drivers/media/video/sh_mobile_ceu_camera.c +++ b/drivers/media/video/sh_mobile_ceu_camera.c @@ -304,9 +304,6 @@ static int sh_mobile_ceu_add_device(struct soc_camera_device *icd) "SuperH Mobile CEU driver attached to camera %d\n", icd->devnum); - if (pcdev->pdata->enable_camera) - pcdev->pdata->enable_camera(); - ret = icd->ops->init(icd); if (ret) goto err; @@ -333,8 +330,6 @@ static void sh_mobile_ceu_remove_device(struct soc_camera_device *icd) ceu_write(pcdev, CEIER, 0); ceu_write(pcdev, CAPSR, 1 << 16); /* reset */ icd->ops->release(icd); - if (pcdev->pdata->disable_camera) - pcdev->pdata->disable_camera(); dev_info(&icd->dev, "SuperH Mobile CEU driver detached from camera %d\n", diff --git a/include/media/sh_mobile_ceu.h b/include/media/sh_mobile_ceu.h index 234a471..b5dbefe 100644 --- a/include/media/sh_mobile_ceu.h +++ b/include/media/sh_mobile_ceu.h @@ -5,8 +5,6 @@ struct sh_mobile_ceu_info { unsigned long flags; /* SOCAM_... */ - void (*enable_camera)(void); - void (*disable_camera)(void); }; #endif /* __ASM_SH_MOBILE_CEU_H__ */ diff --git a/include/media/soc_camera.h b/include/media/soc_camera.h index d548de3..c5de7bb 100644 --- a/include/media/soc_camera.h +++ b/include/media/soc_camera.h @@ -83,6 +83,9 @@ struct soc_camera_link { int bus_id; /* GPIO number to switch between 8 and 10 bit modes */ unsigned int gpio; + /* Optional callbacks to power on or off and reset the sensor */ + int (*power)(struct device *, int); + int (*reset)(struct device *); }; static inline struct soc_camera_device *to_soc_camera_dev(struct device *dev) -- cgit v0.10.2 From e0677760945585ee475c2d6a7fa4d5b0dd573cb4 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Sat, 16 Aug 2008 07:50:23 -0300 Subject: V4L/DVB (8689): dpc7146: remove dpc7146 demonstration board driver Old driver for the dpc7146 demonstration board that is no longer relevant. The last time this was tested on actual hardware was probably around 2002. Since this is a driver for a demonstration board the decision was made (after discussing this with the original author, Michael Hunold) to remove it rather than spending a lot of effort continually updating this driver to stay in sync with the latest internal V4L2 or I2C API. Signed-off-by: Hans Verkuil Signed-off-by: Michael Hunold Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig index 37123ff..2fa7418 100644 --- a/drivers/media/video/Kconfig +++ b/drivers/media/video/Kconfig @@ -709,21 +709,6 @@ config VIDEO_MXB To compile this driver as a module, choose M here: the module will be called mxb. -config VIDEO_DPC - tristate "Philips-Semiconductors 'dpc7146 demonstration board'" - depends on PCI && VIDEO_V4L1 && I2C - select VIDEO_SAA7146_VV - select VIDEO_SAA7111 if VIDEO_HELPER_CHIPS_AUTO - ---help--- - This is a video4linux driver for the 'dpc7146 demonstration - board' by Philips-Semiconductors. It's the reference design - for SAA7146 bases boards, so if you have some unsupported - saa7146 based, analog video card, chances are good that it - will work with this skeleton driver. - - To compile this driver as a module, choose M here: the - module will be called dpc7146. - config VIDEO_HEXIUM_ORION tristate "Hexium HV-PCI6 and Orion frame grabber" depends on PCI && VIDEO_V4L2 && I2C diff --git a/drivers/media/video/Makefile b/drivers/media/video/Makefile index d234db7..012bc11 100644 --- a/drivers/media/video/Makefile +++ b/drivers/media/video/Makefile @@ -84,7 +84,6 @@ obj-$(CONFIG_VIDEO_CPIA2) += cpia2/ obj-$(CONFIG_VIDEO_MXB) += mxb.o obj-$(CONFIG_VIDEO_HEXIUM_ORION) += hexium_orion.o obj-$(CONFIG_VIDEO_HEXIUM_GEMINI) += hexium_gemini.o -obj-$(CONFIG_VIDEO_DPC) += dpc7146.o obj-$(CONFIG_TUNER_3036) += tuner-3036.o obj-$(CONFIG_VIDEOBUF_GEN) += videobuf-core.o diff --git a/drivers/media/video/dpc7146.c b/drivers/media/video/dpc7146.c deleted file mode 100644 index 88d6df7..0000000 --- a/drivers/media/video/dpc7146.c +++ /dev/null @@ -1,408 +0,0 @@ -/* - dpc7146.c - v4l2 driver for the dpc7146 demonstration board - - Copyright (C) 2000-2003 Michael Hunold - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the Free Software - Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. -*/ - -#define DEBUG_VARIABLE debug - -#include -#include /* for saa7111a */ - -#define I2C_SAA7111A 0x24 - -/* All unused bytes are reserverd. */ -#define SAA711X_CHIP_VERSION 0x00 -#define SAA711X_ANALOG_INPUT_CONTROL_1 0x02 -#define SAA711X_ANALOG_INPUT_CONTROL_2 0x03 -#define SAA711X_ANALOG_INPUT_CONTROL_3 0x04 -#define SAA711X_ANALOG_INPUT_CONTROL_4 0x05 -#define SAA711X_HORIZONTAL_SYNC_START 0x06 -#define SAA711X_HORIZONTAL_SYNC_STOP 0x07 -#define SAA711X_SYNC_CONTROL 0x08 -#define SAA711X_LUMINANCE_CONTROL 0x09 -#define SAA711X_LUMINANCE_BRIGHTNESS 0x0A -#define SAA711X_LUMINANCE_CONTRAST 0x0B -#define SAA711X_CHROMA_SATURATION 0x0C -#define SAA711X_CHROMA_HUE_CONTROL 0x0D -#define SAA711X_CHROMA_CONTROL 0x0E -#define SAA711X_FORMAT_DELAY_CONTROL 0x10 -#define SAA711X_OUTPUT_CONTROL_1 0x11 -#define SAA711X_OUTPUT_CONTROL_2 0x12 -#define SAA711X_OUTPUT_CONTROL_3 0x13 -#define SAA711X_V_GATE_1_START 0x15 -#define SAA711X_V_GATE_1_STOP 0x16 -#define SAA711X_V_GATE_1_MSB 0x17 -#define SAA711X_TEXT_SLICER_STATUS 0x1A -#define SAA711X_DECODED_BYTES_OF_TS_1 0x1B -#define SAA711X_DECODED_BYTES_OF_TS_2 0x1C -#define SAA711X_STATUS_BYTE 0x1F - -#define DPC_BOARD_CAN_DO_VBI(dev) (dev->revision != 0) - -static int debug; -module_param(debug, int, 0); -MODULE_PARM_DESC(debug, "debug verbosity"); - -static int dpc_num; - -#define DPC_INPUTS 2 -static struct v4l2_input dpc_inputs[DPC_INPUTS] = { - { 0, "Port A", V4L2_INPUT_TYPE_CAMERA, 2, 0, V4L2_STD_PAL_BG|V4L2_STD_NTSC_M, 0 }, - { 1, "Port B", V4L2_INPUT_TYPE_CAMERA, 2, 0, V4L2_STD_PAL_BG|V4L2_STD_NTSC_M, 0 }, -}; - -#define DPC_AUDIOS 0 - -static struct saa7146_extension_ioctls ioctls[] = { - { VIDIOC_G_INPUT, SAA7146_EXCLUSIVE }, - { VIDIOC_S_INPUT, SAA7146_EXCLUSIVE }, - { VIDIOC_ENUMINPUT, SAA7146_EXCLUSIVE }, - { VIDIOC_S_STD, SAA7146_AFTER }, - { 0, 0 } -}; - -struct dpc -{ - struct video_device *video_dev; - struct video_device *vbi_dev; - - struct i2c_adapter i2c_adapter; - struct i2c_client *saa7111a; - - int cur_input; /* current input */ -}; - -static int dpc_check_clients(struct device *dev, void *data) -{ - struct dpc* dpc = data; - struct i2c_client *client = i2c_verify_client(dev); - - if( !client ) - return 0; - - if( I2C_SAA7111A == client->addr ) - dpc->saa7111a = client; - - return 0; -} - -/* fixme: add vbi stuff here */ -static int dpc_probe(struct saa7146_dev* dev) -{ - struct dpc* dpc = NULL; - - dpc = kzalloc(sizeof(struct dpc), GFP_KERNEL); - if( NULL == dpc ) { - printk("dpc_v4l2.o: dpc_probe: not enough kernel memory.\n"); - return -ENOMEM; - } - - /* FIXME: enable i2c-port pins, video-port-pins - video port pins should be enabled here ?! */ - saa7146_write(dev, MC1, (MASK_08 | MASK_24 | MASK_10 | MASK_26)); - - dpc->i2c_adapter = (struct i2c_adapter) { - .class = I2C_CLASS_TV_ANALOG, - .name = "dpc7146", - }; - saa7146_i2c_adapter_prepare(dev, &dpc->i2c_adapter, SAA7146_I2C_BUS_BIT_RATE_480); - if(i2c_add_adapter(&dpc->i2c_adapter) < 0) { - DEB_S(("cannot register i2c-device. skipping.\n")); - kfree(dpc); - return -EFAULT; - } - - /* loop through all i2c-devices on the bus and look who is there */ - device_for_each_child(&dpc->i2c_adapter.dev, dpc, dpc_check_clients); - - /* check if all devices are present */ - if (!dpc->saa7111a) { - DEB_D(("dpc_v4l2.o: dpc_attach failed for this device.\n")); - i2c_del_adapter(&dpc->i2c_adapter); - kfree(dpc); - return -ENODEV; - } - - /* all devices are present, probe was successful */ - DEB_D(("dpc_v4l2.o: dpc_probe succeeded for this device.\n")); - - /* we store the pointer in our private data field */ - dev->ext_priv = dpc; - - return 0; -} - -/* bring hardware to a sane state. this has to be done, just in case someone - wants to capture from this device before it has been properly initialized. - the capture engine would badly fail, because no valid signal arrives on the - saa7146, thus leading to timeouts and stuff. */ -static int dpc_init_done(struct saa7146_dev* dev) -{ - struct dpc* dpc = (struct dpc*)dev->ext_priv; - - DEB_D(("dpc_v4l2.o: dpc_init_done called.\n")); - - /* initialize the helper ics to useful values */ - i2c_smbus_write_byte_data(dpc->saa7111a, 0x00, 0x11); - - i2c_smbus_write_byte_data(dpc->saa7111a, 0x02, 0xc0); - i2c_smbus_write_byte_data(dpc->saa7111a, 0x03, 0x30); - i2c_smbus_write_byte_data(dpc->saa7111a, 0x04, 0x00); - i2c_smbus_write_byte_data(dpc->saa7111a, 0x05, 0x00); - i2c_smbus_write_byte_data(dpc->saa7111a, 0x06, 0xde); - i2c_smbus_write_byte_data(dpc->saa7111a, 0x07, 0xad); - i2c_smbus_write_byte_data(dpc->saa7111a, 0x08, 0xa8); - i2c_smbus_write_byte_data(dpc->saa7111a, 0x09, 0x00); - i2c_smbus_write_byte_data(dpc->saa7111a, 0x0a, 0x80); - i2c_smbus_write_byte_data(dpc->saa7111a, 0x0b, 0x47); - i2c_smbus_write_byte_data(dpc->saa7111a, 0x0c, 0x40); - i2c_smbus_write_byte_data(dpc->saa7111a, 0x0d, 0x00); - i2c_smbus_write_byte_data(dpc->saa7111a, 0x0e, 0x03); - - i2c_smbus_write_byte_data(dpc->saa7111a, 0x10, 0xd0); - i2c_smbus_write_byte_data(dpc->saa7111a, 0x11, 0x1c); - i2c_smbus_write_byte_data(dpc->saa7111a, 0x12, 0xc1); - i2c_smbus_write_byte_data(dpc->saa7111a, 0x13, 0x30); - - i2c_smbus_write_byte_data(dpc->saa7111a, 0x1f, 0x81); - - return 0; -} - -static struct saa7146_ext_vv vv_data; - -/* this function only gets called when the probing was successful */ -static int dpc_attach(struct saa7146_dev* dev, struct saa7146_pci_extension_data *info) -{ - struct dpc* dpc = (struct dpc*)dev->ext_priv; - - DEB_D(("dpc_v4l2.o: dpc_attach called.\n")); - - /* checking for i2c-devices can be omitted here, because we - already did this in "dpc_vl42_probe" */ - - saa7146_vv_init(dev,&vv_data); - if( 0 != saa7146_register_device(&dpc->video_dev, dev, "dpc", VFL_TYPE_GRABBER)) { - ERR(("cannot register capture v4l2 device. skipping.\n")); - return -1; - } - - /* initialization stuff (vbi) (only for revision > 0 and for extensions which want it)*/ - if( 0 != DPC_BOARD_CAN_DO_VBI(dev)) { - if( 0 != saa7146_register_device(&dpc->vbi_dev, dev, "dpc", VFL_TYPE_VBI)) { - ERR(("cannot register vbi v4l2 device. skipping.\n")); - } - } - - i2c_use_client(dpc->saa7111a); - - printk("dpc: found 'dpc7146 demonstration board'-%d.\n",dpc_num); - dpc_num++; - - /* the rest */ - dpc->cur_input = 0; - dpc_init_done(dev); - - return 0; -} - -static int dpc_detach(struct saa7146_dev* dev) -{ - struct dpc* dpc = (struct dpc*)dev->ext_priv; - - DEB_EE(("dev:%p\n",dev)); - - i2c_release_client(dpc->saa7111a); - - saa7146_unregister_device(&dpc->video_dev,dev); - if( 0 != DPC_BOARD_CAN_DO_VBI(dev)) { - saa7146_unregister_device(&dpc->vbi_dev,dev); - } - saa7146_vv_release(dev); - - dpc_num--; - - i2c_del_adapter(&dpc->i2c_adapter); - kfree(dpc); - return 0; -} - -#ifdef axa -int dpc_vbi_bypass(struct saa7146_dev* dev) -{ - struct dpc* dpc = (struct dpc*)dev->ext_priv; - - int i = 1; - - /* switch bypass in saa7111a */ - if ( 0 != dpc->saa7111a->driver->command(dpc->saa7111a,SAA711X_VBI_BYPASS, &i)) { - printk("dpc_v4l2.o: VBI_BYPASS: could not address saa7111a.\n"); - return -1; - } - - return 0; -} -#endif - -static int dpc_ioctl(struct saa7146_fh *fh, unsigned int cmd, void *arg) -{ - struct saa7146_dev *dev = fh->dev; - struct dpc* dpc = (struct dpc*)dev->ext_priv; -/* - struct saa7146_vv *vv = dev->vv_data; -*/ - switch(cmd) - { - case VIDIOC_ENUMINPUT: - { - struct v4l2_input *i = arg; - DEB_EE(("VIDIOC_ENUMINPUT %d.\n",i->index)); - - if( i->index < 0 || i->index >= DPC_INPUTS) { - return -EINVAL; - } - - memcpy(i, &dpc_inputs[i->index], sizeof(struct v4l2_input)); - - DEB_D(("dpc_v4l2.o: v4l2_ioctl: VIDIOC_ENUMINPUT %d.\n",i->index)); - return 0; - } - case VIDIOC_G_INPUT: - { - int *input = (int *)arg; - *input = dpc->cur_input; - - DEB_D(("dpc_v4l2.o: VIDIOC_G_INPUT: %d\n",*input)); - return 0; - } - case VIDIOC_S_INPUT: - { - int input = *(int *)arg; - - if (input < 0 || input >= DPC_INPUTS) { - return -EINVAL; - } - - dpc->cur_input = input; - - /* fixme: switch input here, switch audio, too! */ -// saa7146_set_hps_source_and_sync(dev, input_port_selection[input].hps_source, input_port_selection[input].hps_sync); - printk("dpc_v4l2.o: VIDIOC_S_INPUT: fixme switch input.\n"); - - return 0; - } - default: -/* - DEB_D(("dpc_v4l2.o: v4l2_ioctl does not handle this ioctl.\n")); -*/ - return -ENOIOCTLCMD; - } - return 0; -} - -static int std_callback(struct saa7146_dev* dev, struct saa7146_standard *std) -{ - return 0; -} - -static struct saa7146_standard standard[] = { - { - .name = "PAL", .id = V4L2_STD_PAL, - .v_offset = 0x17, .v_field = 288, - .h_offset = 0x14, .h_pixels = 680, - .v_max_out = 576, .h_max_out = 768, - }, { - .name = "NTSC", .id = V4L2_STD_NTSC, - .v_offset = 0x16, .v_field = 240, - .h_offset = 0x06, .h_pixels = 708, - .v_max_out = 480, .h_max_out = 640, - }, { - .name = "SECAM", .id = V4L2_STD_SECAM, - .v_offset = 0x14, .v_field = 288, - .h_offset = 0x14, .h_pixels = 720, - .v_max_out = 576, .h_max_out = 768, - } -}; - -static struct saa7146_extension extension; - -static struct saa7146_pci_extension_data dpc = { - .ext_priv = "Multimedia eXtension Board", - .ext = &extension, -}; - -static struct pci_device_id pci_tbl[] = { - { - .vendor = PCI_VENDOR_ID_PHILIPS, - .device = PCI_DEVICE_ID_PHILIPS_SAA7146, - .subvendor = 0x0000, - .subdevice = 0x0000, - .driver_data = (unsigned long)&dpc, - }, { - .vendor = 0, - } -}; - -MODULE_DEVICE_TABLE(pci, pci_tbl); - -static struct saa7146_ext_vv vv_data = { - .inputs = DPC_INPUTS, - .capabilities = V4L2_CAP_VBI_CAPTURE, - .stds = &standard[0], - .num_stds = sizeof(standard)/sizeof(struct saa7146_standard), - .std_callback = &std_callback, - .ioctls = &ioctls[0], - .ioctl = dpc_ioctl, -}; - -static struct saa7146_extension extension = { - .name = "dpc7146 demonstration board", - .flags = SAA7146_USE_I2C_IRQ, - - .pci_tbl = &pci_tbl[0], - .module = THIS_MODULE, - - .probe = dpc_probe, - .attach = dpc_attach, - .detach = dpc_detach, - - .irq_mask = 0, - .irq_func = NULL, -}; - -static int __init dpc_init_module(void) -{ - if( 0 != saa7146_register_extension(&extension)) { - DEB_S(("failed to register extension.\n")); - return -ENODEV; - } - - return 0; -} - -static void __exit dpc_cleanup_module(void) -{ - saa7146_unregister_extension(&extension); -} - -module_init(dpc_init_module); -module_exit(dpc_cleanup_module); - -MODULE_DESCRIPTION("video4linux-2 driver for the 'dpc7146 demonstration board'"); -MODULE_AUTHOR("Michael Hunold "); -MODULE_LICENSE("GPL"); -- cgit v0.10.2 From 45a5b872bda1a3b5a4959ce66d19381df82419c9 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Sat, 16 Aug 2008 07:56:12 -0300 Subject: V4L/DVB (8690): tuner-3036: remove driver This driver is for VERY old i2c-over-parallel port teletext receiver boxes. Rather then spending effort on converting this driver to V4L2, and since it is extremely unlikely that anyone still uses one of these devices, it was decided to drop it (after discussing this as well with the original author, Phil Blundell). Signed-off-by: Hans Verkuil Signed-off-by: Phil Blundell Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig index 2fa7418..7f7482bf 100644 --- a/drivers/media/video/Kconfig +++ b/drivers/media/video/Kconfig @@ -579,13 +579,6 @@ config VIDEO_SAA5249 To compile this driver as a module, choose M here: the module will be called saa5249. -config TUNER_3036 - tristate "SAB3036 tuner" - depends on I2C && VIDEO_V4L1 - help - Say Y here to include support for Philips SAB3036 compatible tuners. - If in doubt, say N. - config VIDEO_VINO tristate "SGI Vino Video For Linux (EXPERIMENTAL)" depends on I2C && SGI_IP22 && EXPERIMENTAL && VIDEO_V4L2 diff --git a/drivers/media/video/Makefile b/drivers/media/video/Makefile index 012bc11..28e3257 100644 --- a/drivers/media/video/Makefile +++ b/drivers/media/video/Makefile @@ -84,7 +84,6 @@ obj-$(CONFIG_VIDEO_CPIA2) += cpia2/ obj-$(CONFIG_VIDEO_MXB) += mxb.o obj-$(CONFIG_VIDEO_HEXIUM_ORION) += hexium_orion.o obj-$(CONFIG_VIDEO_HEXIUM_GEMINI) += hexium_gemini.o -obj-$(CONFIG_TUNER_3036) += tuner-3036.o obj-$(CONFIG_VIDEOBUF_GEN) += videobuf-core.o obj-$(CONFIG_VIDEOBUF_DMA_SG) += videobuf-dma-sg.o diff --git a/drivers/media/video/tuner-3036.c b/drivers/media/video/tuner-3036.c deleted file mode 100644 index bdf506e..0000000 --- a/drivers/media/video/tuner-3036.c +++ /dev/null @@ -1,214 +0,0 @@ -/* - * Driver for Philips SAB3036 "CITAC" tuner control chip. - * - * Author: Phil Blundell - * - * The SAB3036 is just about different enough from the chips that - * tuner.c copes with to make it not worth the effort to crowbar - * the support into that file. So instead we have a separate driver. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include - -#include - -static int debug; /* insmod parameter */ -static int this_adap; - -static struct i2c_client client_template; - -/* Addresses to scan */ -static unsigned short normal_i2c[] = { 0x60, 0x61, I2C_CLIENT_END }; -static unsigned short ignore = I2C_CLIENT_END; - -static struct i2c_client_address_data addr_data = { - .normal_i2c = normal_i2c, - .probe = &ignore, - .ignore = &ignore, -}; - -/* ---------------------------------------------------------------------- */ - -static unsigned char -tuner_getstatus (struct i2c_client *c) -{ - unsigned char byte; - if (i2c_master_recv(c, &byte, 1) != 1) - printk(KERN_ERR "tuner-3036: I/O error.\n"); - return byte; -} - -#define TUNER_FL 0x80 - -static int -tuner_islocked (struct i2c_client *c) -{ - return (tuner_getstatus(c) & TUNER_FL); -} - -/* ---------------------------------------------------------------------- */ - -static void -set_tv_freq(struct i2c_client *c, int freq) -{ - u16 div = ((freq * 20) / 16); - unsigned long give_up = jiffies + HZ; - unsigned char buffer[2]; - - if (debug) - printk(KERN_DEBUG "tuner: setting frequency %dMHz, divisor %x\n", freq / 16, div); - - /* Select high tuning current */ - buffer[0] = 0x29; - buffer[1] = 0x3e; - - if (i2c_master_send(c, buffer, 2) != 2) - printk("tuner: i2c i/o error 1\n"); - - buffer[0] = 0x80 | ((div>>8) & 0x7f); - buffer[1] = div & 0xff; - - if (i2c_master_send(c, buffer, 2) != 2) - printk("tuner: i2c i/o error 2\n"); - - while (!tuner_islocked(c) && time_before(jiffies, give_up)) - schedule(); - - if (!tuner_islocked(c)) - printk(KERN_WARNING "tuner: failed to achieve PLL lock\n"); - - /* Select low tuning current and engage AFC */ - buffer[0] = 0x29; - buffer[1] = 0xb2; - - if (i2c_master_send(c, buffer, 2) != 2) - printk("tuner: i2c i/o error 3\n"); - - if (debug) - printk(KERN_DEBUG "tuner: status %02x\n", tuner_getstatus(c)); -} - -/* ---------------------------------------------------------------------- */ - -static int -tuner_attach(struct i2c_adapter *adap, int addr, int kind) -{ - static unsigned char buffer[] = { 0x29, 0x32, 0x2a, 0, 0x2b, 0 }; - - struct i2c_client *client; - - if (this_adap > 0) - return -1; - this_adap++; - - client_template.adapter = adap; - client_template.addr = addr; - - client = kmalloc(sizeof(struct i2c_client), GFP_KERNEL); - if (client == NULL) - return -ENOMEM; - memcpy(client, &client_template, sizeof(struct i2c_client)); - - printk("tuner: SAB3036 found, status %02x\n", tuner_getstatus(client)); - - i2c_attach_client(client); - - if (i2c_master_send(client, buffer, 2) != 2) - printk("tuner: i2c i/o error 1\n"); - if (i2c_master_send(client, buffer+2, 2) != 2) - printk("tuner: i2c i/o error 2\n"); - if (i2c_master_send(client, buffer+4, 2) != 2) - printk("tuner: i2c i/o error 3\n"); - return 0; -} - -static int -tuner_detach(struct i2c_client *c) -{ - return 0; -} - -static int -tuner_command(struct i2c_client *client, unsigned int cmd, void *arg) -{ - int *iarg = (int*)arg; - - switch (cmd) - { - case VIDIOCSFREQ: - set_tv_freq(client, *iarg); - break; - - default: - return -EINVAL; - } - return 0; -} - -static int -tuner_probe(struct i2c_adapter *adap) -{ - this_adap = 0; - if (adap->id == I2C_HW_B_LP) - return i2c_probe(adap, &addr_data, tuner_attach); - return 0; -} - -/* ----------------------------------------------------------------------- */ - -static struct i2c_driver -i2c_driver_tuner = -{ - .driver = { - .name = "sab3036", - }, - .id = I2C_DRIVERID_SAB3036, - .attach_adapter = tuner_probe, - .detach_client = tuner_detach, - .command = tuner_command -}; - -static struct i2c_client client_template = -{ - .driver = &i2c_driver_tuner, - .name = "SAB3036", -}; - -static int __init -tuner3036_init(void) -{ - return i2c_add_driver(&i2c_driver_tuner); -} - -static void __exit -tuner3036_exit(void) -{ - i2c_del_driver(&i2c_driver_tuner); -} - -MODULE_DESCRIPTION("SAB3036 tuner driver"); -MODULE_AUTHOR("Philip Blundell "); -MODULE_LICENSE("GPL"); - -module_param(debug, int, 0); -MODULE_PARM_DESC(debug,"Enable debugging output"); - -module_init(tuner3036_init); -module_exit(tuner3036_exit); -- cgit v0.10.2 From 66c6bda79fdc273608e2700a0c6dd4cb82d0bac3 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Sat, 16 Aug 2008 08:33:14 -0300 Subject: V4L/DVB (8691): i2c-id: remove obsolete SAB3036 driver ID Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab diff --git a/include/linux/i2c-id.h b/include/linux/i2c-id.h index bf34c5f..493435b 100644 --- a/include/linux/i2c-id.h +++ b/include/linux/i2c-id.h @@ -41,7 +41,6 @@ #define I2C_DRIVERID_SAA7110 22 /* video decoder */ #define I2C_DRIVERID_SAA5249 24 /* SAA5249 and compatibles */ #define I2C_DRIVERID_PCF8583 25 /* real time clock */ -#define I2C_DRIVERID_SAB3036 26 /* SAB3036 tuner */ #define I2C_DRIVERID_TDA7432 27 /* Stereo sound processor */ #define I2C_DRIVERID_TVMIXER 28 /* Mixer driver for tv cards */ #define I2C_DRIVERID_TVAUDIO 29 /* Generic TV sound driver */ -- cgit v0.10.2 From e758c6f86bc53009893dfa517b9bb3a408d7a2e2 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Mon, 18 Aug 2008 04:48:42 -0300 Subject: V4L/DVB (8695): usbvideo: add proper error check and add release function Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/usbvideo/usbvideo.c b/drivers/media/video/usbvideo/usbvideo.c index bf1bc2f..6b1b200 100644 --- a/drivers/media/video/usbvideo/usbvideo.c +++ b/drivers/media/video/usbvideo/usbvideo.c @@ -1006,6 +1006,10 @@ allocate_done: EXPORT_SYMBOL(usbvideo_AllocateDevice); +static void usbvideo_dummy_release(struct video_device *vfd) +{ +} + int usbvideo_RegisterVideoDevice(struct uvd *uvd) { char tmp1[20], tmp2[20]; /* Buffers for printing */ @@ -1039,7 +1043,8 @@ int usbvideo_RegisterVideoDevice(struct uvd *uvd) return -EINVAL; } uvd->vdev.parent = &uvd->dev->dev; - if (video_register_device(&uvd->vdev, VFL_TYPE_GRABBER, video_nr) == -1) { + uvd->vdev.release = usbvideo_dummy_release; + if (video_register_device(&uvd->vdev, VFL_TYPE_GRABBER, video_nr) < 0) { err("%s: video_register_device failed", __func__); return -EPIPE; } -- cgit v0.10.2 From 06a3f58496462f25cc031d1cb6d49cb78af1f636 Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Tue, 19 Aug 2008 20:40:30 -0300 Subject: V4L/DVB (8724): dvb: drx397xD: checkpatch.pl cleanups This driver sure needs some rework. For now, let's try to clean it up a bit before start reimplementing anything. checkpatch.pl still not happy with this driver after this patch, but the most annoying errors are gone, comments now use C-style only, labels are well placed and some other minor fixes. Some more clean up patches will come as I work on this driver. Please review it carefully. Cc: Mauro Carvalho Chehab Cc: Henk Vergonet [mchehab@infradead.org: Manually fixed some conflicts with a previous patch] Signed-off-by: Felipe Balbi Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/dvb/frontends/drx397xD.c b/drivers/media/dvb/frontends/drx397xD.c index e19147b..77dd4f2 100644 --- a/drivers/media/dvb/frontends/drx397xD.c +++ b/drivers/media/dvb/frontends/drx397xD.c @@ -38,35 +38,32 @@ static const char mod_name[] = "drx397xD"; #define F_SET_0D0h 1 #define F_SET_0D4h 2 -typedef enum fw_ix { +enum fw_ix { #define _FW_ENTRY(a, b) b #include "drx397xD_fw.h" -} fw_ix_t; +}; /* chip specifics */ struct drx397xD_state { struct i2c_adapter *i2c; struct dvb_frontend frontend; struct drx397xD_config config; - fw_ix_t chip_rev; + enum fw_ix chip_rev; int flags; u32 bandwidth_parm; /* internal bandwidth conversions */ u32 f_osc; /* w90: actual osc frequency [Hz] */ }; -/******************************************************************************* - * Firmware - ******************************************************************************/ - +/* Firmware */ static const char *blob_name[] = { #define _BLOB_ENTRY(a, b) a #include "drx397xD_fw.h" }; -typedef enum blob_ix { +enum blob_ix { #define _BLOB_ENTRY(a, b) b #include "drx397xD_fw.h" -} blob_ix_t; +}; static struct { const char *name; @@ -85,7 +82,7 @@ static struct { }; /* use only with writer lock aquired */ -static void _drx_release_fw(struct drx397xD_state *s, fw_ix_t ix) +static void _drx_release_fw(struct drx397xD_state *s, enum fw_ix ix) { memset(&fw[ix].data[0], 0, sizeof(fw[0].data)); if (fw[ix].file) @@ -94,7 +91,7 @@ static void _drx_release_fw(struct drx397xD_state *s, fw_ix_t ix) static void drx_release_fw(struct drx397xD_state *s) { - fw_ix_t ix = s->chip_rev; + enum fw_ix ix = s->chip_rev; pr_debug("%s\n", __func__); @@ -107,7 +104,7 @@ static void drx_release_fw(struct drx397xD_state *s) write_unlock(&fw[ix].lock); } -static int drx_load_fw(struct drx397xD_state *s, fw_ix_t ix) +static int drx_load_fw(struct drx397xD_state *s, enum fw_ix ix) { const u8 *data; size_t size, len; @@ -175,26 +172,28 @@ static int drx_load_fw(struct drx397xD_state *s, fw_ix_t ix) goto exit_corrupt; } } while (i < size); - exit_corrupt: + +exit_corrupt: printk(KERN_ERR "%s: Firmware is corrupt\n", mod_name); - exit_err: +exit_err: _drx_release_fw(s, ix); fw[ix].refcnt--; - exit_ok: +exit_ok: fw[ix].refcnt++; write_unlock(&fw[ix].lock); + return rc; } -/******************************************************************************* - * i2c bus IO - ******************************************************************************/ - -static int write_fw(struct drx397xD_state *s, blob_ix_t ix) +/* i2c bus IO */ +static int write_fw(struct drx397xD_state *s, enum blob_ix ix) { - struct i2c_msg msg = {.addr = s->config.demod_address,.flags = 0 }; const u8 *data; int len, rc = 0, i = 0; + struct i2c_msg msg = { + .addr = s->config.demod_address, + .flags = 0 + }; if (ix < 0 || ix >= ARRAY_SIZE(blob_name)) { pr_debug("%s drx_fw_ix_t out of range\n", __func__); @@ -229,8 +228,9 @@ static int write_fw(struct drx397xD_state *s, blob_ix_t ix) goto exit_rc; } } - exit_rc: +exit_rc: read_unlock(&fw[s->chip_rev].lock); + return 0; } @@ -242,17 +242,16 @@ static int _read16(struct drx397xD_state *s, u32 i2c_adr) u16 v; struct i2c_msg msg[2] = { { - .addr = s->config.demod_address, - .flags = 0, - .buf = a, - .len = sizeof(a) - } - , { - .addr = s->config.demod_address, - .flags = I2C_M_RD, - .buf = (u8 *) & v, - .len = sizeof(v) - } + .addr = s->config.demod_address, + .flags = 0, + .buf = a, + .len = sizeof(a) + }, { + .addr = s->config.demod_address, + .flags = I2C_M_RD, + .buf = (u8 *) &v, + .len = sizeof(v) + } }; *(u32 *) a = i2c_adr; @@ -277,27 +276,27 @@ static int _write16(struct drx397xD_state *s, u32 i2c_adr, u16 val) }; *(u32 *) a = i2c_adr; - *(u16 *) & a[4] = val; + *(u16 *) &a[4] = val; rc = i2c_transfer(s->i2c, &msg, 1); if (rc != 1) return -EIO; + return 0; } -#define WR16(ss,adr, val) \ +#define WR16(ss, adr, val) \ _write16(ss, I2C_ADR_C0(adr), cpu_to_le16(val)) -#define WR16_E0(ss,adr, val) \ +#define WR16_E0(ss, adr, val) \ _write16(ss, I2C_ADR_E0(adr), cpu_to_le16(val)) -#define RD16(ss,adr) \ +#define RD16(ss, adr) \ _read16(ss, I2C_ADR_C0(adr)) -#define EXIT_RC( cmd ) if ( (rc = (cmd)) < 0) goto exit_rc - -/******************************************************************************* - * Tuner callback - ******************************************************************************/ +#define EXIT_RC(cmd) \ + if ((rc = (cmd)) < 0) \ + goto exit_rc +/* Tuner callback */ static int PLL_Set(struct drx397xD_state *s, struct dvb_frontend_parameters *fep, int *df_tuner) { @@ -331,10 +330,7 @@ static int PLL_Set(struct drx397xD_state *s, return 0; } -/******************************************************************************* - * Demodulator helper functions - ******************************************************************************/ - +/* Demodulator helper functions */ static int SC_WaitForReady(struct drx397xD_state *s) { int cnt = 1000; @@ -347,6 +343,7 @@ static int SC_WaitForReady(struct drx397xD_state *s) if (rc == 0) return 0; } + return -1; } @@ -361,6 +358,7 @@ static int SC_SendCommand(struct drx397xD_state *s, int cmd) rc = RD16(s, 0x820042); if ((rc & 0xffff) == 0xffff) return -1; + return 0; } @@ -383,6 +381,7 @@ static int HI_Command(struct drx397xD_state *s, u16 cmd) if (rc < 0) return rc; } while (--cnt); + return rc; } @@ -392,13 +391,14 @@ static int HI_CfgCommand(struct drx397xD_state *s) pr_debug("%s\n", __func__); WR16(s, 0x420033, 0x3973); - WR16(s, 0x420034, s->config.w50); // code 4, log 4 - WR16(s, 0x420035, s->config.w52); // code 15, log 9 + WR16(s, 0x420034, s->config.w50); /* code 4, log 4 */ + WR16(s, 0x420035, s->config.w52); /* code 15, log 9 */ WR16(s, 0x420036, s->config.demod_address << 1); - WR16(s, 0x420037, s->config.w56); // code (set_i2c ?? initX 1 ), log 1 -// WR16(s, 0x420033, 0x3973); + WR16(s, 0x420037, s->config.w56); /* code (set_i2c ?? initX 1 ), log 1 */ + /* WR16(s, 0x420033, 0x3973); */ if ((s->config.w56 & 8) == 0) return HI_Command(s, 3); + return WR16(s, 0x420032, 0x3); } @@ -468,7 +468,7 @@ static int SetCfgIfAgc(struct drx397xD_state *s, struct drx397xD_CfgIfAgc *agc) i = slowIncrDecLUT_15272[rem / 28]; EXIT_RC(WR16(s, 0x0c2002b, i)); rc = WR16(s, 0x0c2002c, i); - exit_rc: +exit_rc: return rc; } @@ -498,7 +498,7 @@ static int SetCfgRfAgc(struct drx397xD_state *s, struct drx397xD_CfgRfAgc *agc) rc &= ~2; break; case 0: - // loc_8000659 + /* loc_8000659 */ s->config.w9C &= ~2; EXIT_RC(WR16(s, 0x0c20015, s->config.w9C)); EXIT_RC(RD16(s, 0x0c20010)); @@ -522,7 +522,8 @@ static int SetCfgRfAgc(struct drx397xD_state *s, struct drx397xD_CfgRfAgc *agc) rc |= 2; } rc = WR16(s, 0x0c20013, rc); - exit_rc: + +exit_rc: return rc; } @@ -602,7 +603,8 @@ static int CorrectSysClockDeviation(struct drx397xD_state *s) s->config.f_osc * 1000, clk - s->config.f_osc * 1000); } rc = WR16(s, 0x08200e8, 0); - exit_rc: + +exit_rc: return rc; } @@ -620,17 +622,17 @@ static int ConfigureMPEGOutput(struct drx397xD_state *s, int type) si &= ~1; bp = 0x200; } - if (s->config.w9A == 0) { + if (s->config.w9A == 0) si |= 0x80; - } else { + else si &= ~0x80; - } EXIT_RC(WR16(s, 0x2150045, 0)); EXIT_RC(WR16(s, 0x2150010, si)); EXIT_RC(WR16(s, 0x2150011, bp)); rc = WR16(s, 0x2150012, (type == 0 ? 0xfff : 0)); - exit_rc: + +exit_rc: return rc; } @@ -658,7 +660,7 @@ static int drx_tune(struct drx397xD_state *s, rc = ConfigureMPEGOutput(s, 0); if (rc < 0) goto set_tuner; - set_tuner: +set_tuner: rc = PLL_Set(s, fep, &df_tuner); if (rc < 0) { @@ -835,16 +837,16 @@ static int drx_tune(struct drx397xD_state *s, rc = WR16(s, 0x2010012, 0); if (rc < 0) goto exit_rc; - // QPSK QAM16 QAM64 - ebx = 0x19f; // 62 - ebp = 0x1fb; // 15 - v20 = 0x16a; // 62 - v1E = 0x195; // 62 - v16 = 0x1bb; // 15 - v14 = 0x1ef; // 15 - v12 = 5; // 16 - v10 = 5; // 16 - v0E = 5; // 16 + /* QPSK QAM16 QAM64 */ + ebx = 0x19f; /* 62 */ + ebp = 0x1fb; /* 15 */ + v20 = 0x16a; /* 62 */ + v1E = 0x195; /* 62 */ + v16 = 0x1bb; /* 15 */ + v14 = 0x1ef; /* 15 */ + v12 = 5; /* 16 */ + v10 = 5; /* 16 */ + v0E = 5; /* 16 */ } switch (fep->u.ofdm.constellation) { @@ -997,17 +999,17 @@ static int drx_tune(struct drx397xD_state *s, case BANDWIDTH_8_MHZ: /* 0 */ case BANDWIDTH_AUTO: rc = WR16(s, 0x0c2003f, 0x32); - s->bandwidth_parm = ebx = 0x8b8249; // 9142857 + s->bandwidth_parm = ebx = 0x8b8249; edx = 0; break; case BANDWIDTH_7_MHZ: rc = WR16(s, 0x0c2003f, 0x3b); - s->bandwidth_parm = ebx = 0x7a1200; // 8000000 + s->bandwidth_parm = ebx = 0x7a1200; edx = 0x4807; break; case BANDWIDTH_6_MHZ: rc = WR16(s, 0x0c2003f, 0x47); - s->bandwidth_parm = ebx = 0x68a1b6; // 6857142 + s->bandwidth_parm = ebx = 0x68a1b6; edx = 0x0f07; break; }; @@ -1060,8 +1062,6 @@ static int drx_tune(struct drx397xD_state *s, WR16(s, 0x0820040, 1); SC_SendCommand(s, 1); -// rc = WR16(s, 0x2150000, 1); -// if (rc < 0) goto exit_rc; rc = WR16(s, 0x2150000, 2); rc = WR16(s, 0x2150016, a); @@ -1069,7 +1069,8 @@ static int drx_tune(struct drx397xD_state *s, rc = WR16(s, 0x2150036, 0); rc = WR16(s, 0x2150000, 1); s->config.d60 = 2; - exit_rc: + +exit_rc: return rc; } @@ -1102,18 +1103,18 @@ static int drx397x_init(struct dvb_frontend *fe) /* HI_CfgCommand */ s->config.w50 = 4; - s->config.w52 = 9; // 0xf; + s->config.w52 = 9; - s->config.f_if = 42800000; /* d14: intermediate frequency [Hz] */ - s->config.f_osc = 48000; /* s66 : oscillator frequency [kHz] */ - s->config.w92 = 12000; // 20000; + s->config.f_if = 42800000; /* d14: intermediate frequency [Hz] */ + s->config.f_osc = 48000; /* s66 : oscillator frequency [kHz] */ + s->config.w92 = 12000; s->config.w9C = 0x000e; s->config.w9E = 0x0000; /* ConfigureMPEGOutput params */ s->config.wA0 = 4; - s->config.w98 = 1; // 0; + s->config.w98 = 1; s->config.w9A = 1; /* get chip revision */ @@ -1248,7 +1249,7 @@ static int drx397x_init(struct dvb_frontend *fe) rc = WR16(s, 0x0c20012, 1); } - write_DRXD_InitFE_1: +write_DRXD_InitFE_1: rc = write_fw(s, DRXD_InitFE_1); if (rc < 0) @@ -1311,7 +1312,8 @@ static int drx397x_init(struct dvb_frontend *fe) s->config.d5C = 0; s->config.d60 = 1; s->config.d48 = 1; - error: + +error: return rc; } @@ -1326,7 +1328,8 @@ static int drx397x_set_frontend(struct dvb_frontend *fe, { struct drx397xD_state *s = fe->demodulator_priv; - s->config.s20d24 = 1; // 0; + s->config.s20d24 = 1; + return drx_tune(s, params); } @@ -1337,18 +1340,16 @@ static int drx397x_get_tune_settings(struct dvb_frontend *fe, fe_tune_settings->min_delay_ms = 10000; fe_tune_settings->step_size = 0; fe_tune_settings->max_drift = 0; + return 0; } -static int drx397x_read_status(struct dvb_frontend *fe, fe_status_t * status) +static int drx397x_read_status(struct dvb_frontend *fe, fe_status_t *status) { struct drx397xD_state *s = fe->demodulator_priv; int lockstat; GetLockStatus(s, &lockstat); - /* TODO */ -// if (lockstat & 1) -// CorrectSysClockDeviation(s); *status = 0; if (lockstat & 2) { @@ -1356,9 +1357,8 @@ static int drx397x_read_status(struct dvb_frontend *fe, fe_status_t * status) ConfigureMPEGOutput(s, 1); *status = FE_HAS_LOCK | FE_HAS_SYNC | FE_HAS_VITERBI; } - if (lockstat & 4) { + if (lockstat & 4) *status |= FE_HAS_CARRIER | FE_HAS_SIGNAL; - } return 0; } @@ -1366,16 +1366,18 @@ static int drx397x_read_status(struct dvb_frontend *fe, fe_status_t * status) static int drx397x_read_ber(struct dvb_frontend *fe, unsigned int *ber) { *ber = 0; + return 0; } -static int drx397x_read_snr(struct dvb_frontend *fe, u16 * snr) +static int drx397x_read_snr(struct dvb_frontend *fe, u16 *snr) { *snr = 0; + return 0; } -static int drx397x_read_signal_strength(struct dvb_frontend *fe, u16 * strength) +static int drx397x_read_signal_strength(struct dvb_frontend *fe, u16 *strength) { struct drx397xD_state *s = fe->demodulator_priv; int rc; @@ -1401,6 +1403,7 @@ static int drx397x_read_signal_strength(struct dvb_frontend *fe, u16 * strength) * The following does the same but with less rounding errors: */ *strength = ~(7720 + (rc * 30744 >> 10)); + return 0; } @@ -1408,6 +1411,7 @@ static int drx397x_read_ucblocks(struct dvb_frontend *fe, unsigned int *ucblocks) { *ucblocks = 0; + return 0; } @@ -1436,22 +1440,22 @@ static struct dvb_frontend_ops drx397x_ops = { .frequency_max = 855250000, .frequency_stepsize = 166667, .frequency_tolerance = 0, - .caps = /* 0x0C01B2EAE */ - FE_CAN_FEC_1_2 | // = 0x2, - FE_CAN_FEC_2_3 | // = 0x4, - FE_CAN_FEC_3_4 | // = 0x8, - FE_CAN_FEC_5_6 | // = 0x20, - FE_CAN_FEC_7_8 | // = 0x80, - FE_CAN_FEC_AUTO | // = 0x200, - FE_CAN_QPSK | // = 0x400, - FE_CAN_QAM_16 | // = 0x800, - FE_CAN_QAM_64 | // = 0x2000, - FE_CAN_QAM_AUTO | // = 0x10000, - FE_CAN_TRANSMISSION_MODE_AUTO | // = 0x20000, - FE_CAN_GUARD_INTERVAL_AUTO | // = 0x80000, - FE_CAN_HIERARCHY_AUTO | // = 0x100000, - FE_CAN_RECOVER | // = 0x40000000, - FE_CAN_MUTE_TS // = 0x80000000 + .caps = /* 0x0C01B2EAE */ + FE_CAN_FEC_1_2 | /* = 0x2, */ + FE_CAN_FEC_2_3 | /* = 0x4, */ + FE_CAN_FEC_3_4 | /* = 0x8, */ + FE_CAN_FEC_5_6 | /* = 0x20, */ + FE_CAN_FEC_7_8 | /* = 0x80, */ + FE_CAN_FEC_AUTO | /* = 0x200, */ + FE_CAN_QPSK | /* = 0x400, */ + FE_CAN_QAM_16 | /* = 0x800, */ + FE_CAN_QAM_64 | /* = 0x2000, */ + FE_CAN_QAM_AUTO | /* = 0x10000, */ + FE_CAN_TRANSMISSION_MODE_AUTO | /* = 0x20000, */ + FE_CAN_GUARD_INTERVAL_AUTO | /* = 0x80000, */ + FE_CAN_HIERARCHY_AUTO | /* = 0x100000, */ + FE_CAN_RECOVER | /* = 0x40000000, */ + FE_CAN_MUTE_TS /* = 0x80000000 */ }, .release = drx397x_release, @@ -1472,33 +1476,35 @@ static struct dvb_frontend_ops drx397x_ops = { struct dvb_frontend *drx397xD_attach(const struct drx397xD_config *config, struct i2c_adapter *i2c) { - struct drx397xD_state *s = NULL; + struct drx397xD_state *state; /* allocate memory for the internal state */ - s = kzalloc(sizeof(struct drx397xD_state), GFP_KERNEL); - if (s == NULL) + state = kzalloc(sizeof(struct drx397xD_state), GFP_KERNEL); + if (!state) goto error; /* setup the state */ - s->i2c = i2c; - memcpy(&s->config, config, sizeof(struct drx397xD_config)); + state->i2c = i2c; + memcpy(&state->config, config, sizeof(struct drx397xD_config)); /* check if the demod is there */ if (RD16(s, 0x2410019) < 0) goto error; /* create dvb_frontend */ - memcpy(&s->frontend.ops, &drx397x_ops, sizeof(struct dvb_frontend_ops)); - s->frontend.demodulator_priv = s; + memcpy(&state->frontend.ops, &drx397x_ops, + sizeof(struct dvb_frontend_ops)); + state->frontend.demodulator_priv = s; + + return &state->frontend; +error: + kfree(state); - return &s->frontend; - error: - kfree(s); return NULL; } +EXPORT_SYMBOL(drx397xD_attach); MODULE_DESCRIPTION("Micronas DRX397xD DVB-T Frontend"); MODULE_AUTHOR("Henk Vergonet"); MODULE_LICENSE("GPL"); -EXPORT_SYMBOL(drx397xD_attach); -- cgit v0.10.2 From 95908ece60443ceb188fccf021d62823de8e6f0c Mon Sep 17 00:00:00 2001 From: Harvey Harrison Date: Wed, 20 Aug 2008 20:44:50 -0300 Subject: V4L/DVB (8725): drx397xD.c sparse annotations Signed-off-by: Harvey Harrison Signed-off-by: Andrew Morton Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/dvb/frontends/drx397xD.c b/drivers/media/dvb/frontends/drx397xD.c index 77dd4f2..0cf3af2 100644 --- a/drivers/media/dvb/frontends/drx397xD.c +++ b/drivers/media/dvb/frontends/drx397xD.c @@ -235,11 +235,11 @@ exit_rc: } /* Function is not endian safe, use the RD16 wrapper below */ -static int _read16(struct drx397xD_state *s, u32 i2c_adr) +static int _read16(struct drx397xD_state *s, __le32 i2c_adr) { int rc; u8 a[4]; - u16 v; + __le16 v; struct i2c_msg msg[2] = { { .addr = s->config.demod_address, @@ -249,12 +249,12 @@ static int _read16(struct drx397xD_state *s, u32 i2c_adr) }, { .addr = s->config.demod_address, .flags = I2C_M_RD, - .buf = (u8 *) &v, + .buf = (u8 *)&v, .len = sizeof(v) } }; - *(u32 *) a = i2c_adr; + *(__le32 *) a = i2c_adr; rc = i2c_transfer(s->i2c, msg, 2); if (rc != 2) @@ -264,7 +264,7 @@ static int _read16(struct drx397xD_state *s, u32 i2c_adr) } /* Function is not endian safe, use the WR16.. wrappers below */ -static int _write16(struct drx397xD_state *s, u32 i2c_adr, u16 val) +static int _write16(struct drx397xD_state *s, __le32 i2c_adr, __le16 val) { u8 a[6]; int rc; @@ -275,8 +275,8 @@ static int _write16(struct drx397xD_state *s, u32 i2c_adr, u16 val) .len = sizeof(a) }; - *(u32 *) a = i2c_adr; - *(u16 *) &a[4] = val; + *(__le32 *)a = i2c_adr; + *(__le16 *)&a[4] = val; rc = i2c_transfer(s->i2c, &msg, 1); if (rc != 1) diff --git a/drivers/media/dvb/frontends/drx397xD.h b/drivers/media/dvb/frontends/drx397xD.h index 2ad1ea0..ba05d17 100644 --- a/drivers/media/dvb/frontends/drx397xD.h +++ b/drivers/media/dvb/frontends/drx397xD.h @@ -28,7 +28,7 @@ #define DRX_F_OFFSET 36000000 #define I2C_ADR_C0(x) \ -( (u32)cpu_to_le32( \ +( cpu_to_le32( \ (u32)( \ (((u32)(x) & (u32)0x000000ffUL) ) | \ (((u32)(x) & (u32)0x0000ff00UL) << 16) | \ @@ -38,7 +38,7 @@ ) #define I2C_ADR_E0(x) \ -( (u32)cpu_to_le32( \ +( cpu_to_le32( \ (u32)( \ (((u32)(x) & (u32)0x000000ffUL) ) | \ (((u32)(x) & (u32)0x0000ff00UL) << 16) | \ -- cgit v0.10.2 From e9e24cee67bf71b929b646387f286e907cbde5fc Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Wed, 20 Aug 2008 20:44:53 -0300 Subject: V4L/DVB (8729): Use DIV_ROUND_UP The kernel.h macro DIV_ROUND_UP performs the computation (((n) + (d) - 1) / (d)) but is perhaps more readable. An extract of the semantic patch that makes this change is as follows: (http://www.emn.fr/x-info/coccinelle/) // @haskernel@ @@ @depends on haskernel@ expression n,d; @@ ( - (n + d - 1) / d + DIV_ROUND_UP(n,d) | - (n + (d - 1)) / d + DIV_ROUND_UP(n,d) ) @depends on haskernel@ expression n,d; @@ - DIV_ROUND_UP((n),d) + DIV_ROUND_UP(n,d) @depends on haskernel@ expression n,d; @@ - DIV_ROUND_UP(n,(d)) + DIV_ROUND_UP(n,d) // Signed-off-by: Julia Lawall Signed-off-by: Andrew Morton Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/bw-qcam.c b/drivers/media/video/bw-qcam.c index 6e39e25..01f0770 100644 --- a/drivers/media/video/bw-qcam.c +++ b/drivers/media/video/bw-qcam.c @@ -495,7 +495,7 @@ static void qc_set(struct qcam_device *q) val2 = (((q->port_mode & QC_MODE_MASK) == QC_BIDIR) ? 24 : 8) * q->transfer_scale; } - val = (val + val2 - 1) / val2; + val = DIV_ROUND_UP(val, val2); qc_command(q, 0x13); qc_command(q, val); @@ -651,7 +651,7 @@ static long qc_capture(struct qcam_device * q, char __user *buf, unsigned long l transperline = q->width * q->bpp; divisor = (((q->port_mode & QC_MODE_MASK) == QC_BIDIR) ? 24 : 8) * q->transfer_scale; - transperline = (transperline + divisor - 1) / divisor; + transperline = DIV_ROUND_UP(transperline, divisor); for (i = 0, yield = yieldlines; i < linestotrans; i++) { diff --git a/drivers/media/video/uvc/uvc_video.c b/drivers/media/video/uvc/uvc_video.c index 6854ac7..03dc3a5 100644 --- a/drivers/media/video/uvc/uvc_video.c +++ b/drivers/media/video/uvc/uvc_video.c @@ -655,7 +655,7 @@ static int uvc_init_video_isoc(struct uvc_video_device *video, if (size > UVC_MAX_FRAME_SIZE) return -EINVAL; - npackets = (size + psize - 1) / psize; + npackets = DIV_ROUND_UP(size, psize); if (npackets > UVC_MAX_ISO_PACKETS) npackets = UVC_MAX_ISO_PACKETS; diff --git a/drivers/media/video/zoran_device.c b/drivers/media/video/zoran_device.c index 88d3697..2b3ca14 100644 --- a/drivers/media/video/zoran_device.c +++ b/drivers/media/video/zoran_device.c @@ -377,7 +377,7 @@ zr36057_set_vfe (struct zoran *zr, /* horizontal */ VidWinWid = video_width; - X = (VidWinWid * 64 + tvn->Wa - 1) / tvn->Wa; + X = DIV_ROUND_UP(VidWinWid * 64, tvn->Wa); We = (VidWinWid * 64) / X; HorDcm = 64 - X; hcrop1 = 2 * ((tvn->Wa - We) / 4); @@ -403,7 +403,7 @@ zr36057_set_vfe (struct zoran *zr, /* Vertical */ DispMode = !(video_height > BUZ_MAX_HEIGHT / 2); VidWinHt = DispMode ? video_height : video_height / 2; - Y = (VidWinHt * 64 * 2 + tvn->Ha - 1) / tvn->Ha; + Y = DIV_ROUND_UP(VidWinHt * 64 * 2, tvn->Ha); He = (VidWinHt * 64) / Y; VerDcm = 64 - Y; vcrop1 = (tvn->Ha / 2 - He) / 2; -- cgit v0.10.2 From 06fcadbf8b63e395d3ae8421a8c3cb2dfd0bc56b Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Fri, 22 Aug 2008 13:31:59 -0300 Subject: V4L/DVB (8730): drx397xD: fix compilation error caused by changeset 71046dfb0853 Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/dvb/frontends/drx397xD.c b/drivers/media/dvb/frontends/drx397xD.c index 0cf3af2..b9ca5c8 100644 --- a/drivers/media/dvb/frontends/drx397xD.c +++ b/drivers/media/dvb/frontends/drx397xD.c @@ -1488,13 +1488,13 @@ struct dvb_frontend *drx397xD_attach(const struct drx397xD_config *config, memcpy(&state->config, config, sizeof(struct drx397xD_config)); /* check if the demod is there */ - if (RD16(s, 0x2410019) < 0) + if (RD16(state, 0x2410019) < 0) goto error; /* create dvb_frontend */ memcpy(&state->frontend.ops, &drx397x_ops, sizeof(struct dvb_frontend_ops)); - state->frontend.demodulator_priv = s; + state->frontend.demodulator_priv = state; return &state->frontend; error: -- cgit v0.10.2 From 69025c934b21a9ce49a76dfef59f1ebdfbe96c78 Mon Sep 17 00:00:00 2001 From: Antoine Jacquet Date: Mon, 18 Aug 2008 17:09:53 -0300 Subject: V4L/DVB (8731): zr364xx: remove BKL Remove the Big Kernel Lock from zr364xx driver after pushdown. Now using an internal locking mecanism on open(). Signed-off-by: Antoine Jacquet Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/zr364xx.c b/drivers/media/video/zr364xx.c index 4e1ef10..9d5d598 100644 --- a/drivers/media/video/zr364xx.c +++ b/drivers/media/video/zr364xx.c @@ -641,25 +641,23 @@ static int zr364xx_open(struct inode *inode, struct file *file) DBG("zr364xx_open"); + mutex_lock(&cam->lock); + cam->skip = 2; - lock_kernel(); err = video_exclusive_open(inode, file); - if (err < 0) { - unlock_kernel(); - return err; - } + if (err < 0) + goto out; if (!cam->framebuf) { cam->framebuf = vmalloc_32(MAX_FRAME_SIZE * FRAMES); if (!cam->framebuf) { info("vmalloc_32 failed!"); - unlock_kernel(); - return -ENOMEM; + err = -ENOMEM; + goto out; } } - mutex_lock(&cam->lock); for (i = 0; init[cam->method][i].size != -1; i++) { err = send_control_msg(udev, 1, init[cam->method][i].value, @@ -667,9 +665,7 @@ static int zr364xx_open(struct inode *inode, struct file *file) init[cam->method][i].size); if (err < 0) { info("error during open sequence: %d", i); - mutex_unlock(&cam->lock); - unlock_kernel(); - return err; + goto out; } } @@ -679,10 +675,11 @@ static int zr364xx_open(struct inode *inode, struct file *file) * like Ekiga does during its startup, can crash the webcam */ mdelay(100); + err = 0; +out: mutex_unlock(&cam->lock); - unlock_kernel(); - return 0; + return err; } -- cgit v0.10.2 From 33d27a45165ae9c3551e8d7c1186a5583371e5c4 Mon Sep 17 00:00:00 2001 From: Antoine Jacquet Date: Mon, 18 Aug 2008 17:14:30 -0300 Subject: V4L/DVB (8732): zr364xx: handle video exclusive open internaly Count the users and do not use video_exclusive_open() anymore. Signed-off-by: Antoine Jacquet Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/zr364xx.c b/drivers/media/video/zr364xx.c index 9d5d598..93991cb 100644 --- a/drivers/media/video/zr364xx.c +++ b/drivers/media/video/zr364xx.c @@ -116,6 +116,7 @@ struct zr364xx_camera { int height; int method; struct mutex lock; + int users; }; @@ -643,11 +644,10 @@ static int zr364xx_open(struct inode *inode, struct file *file) mutex_lock(&cam->lock); - cam->skip = 2; - - err = video_exclusive_open(inode, file); - if (err < 0) + if (cam->users) { + err = -EBUSY; goto out; + } if (!cam->framebuf) { cam->framebuf = vmalloc_32(MAX_FRAME_SIZE * FRAMES); @@ -669,6 +669,8 @@ static int zr364xx_open(struct inode *inode, struct file *file) } } + cam->skip = 2; + cam->users++; file->private_data = vdev; /* Added some delay here, since opening/closing the camera quickly, @@ -700,6 +702,10 @@ static int zr364xx_release(struct inode *inode, struct file *file) udev = cam->udev; mutex_lock(&cam->lock); + + cam->users--; + file->private_data = NULL; + for (i = 0; i < 2; i++) { err = send_control_msg(udev, 1, init[cam->method][i].value, @@ -707,21 +713,19 @@ static int zr364xx_release(struct inode *inode, struct file *file) init[cam->method][i].size); if (err < 0) { info("error during release sequence"); - mutex_unlock(&cam->lock); - return err; + goto out; } } - file->private_data = NULL; - video_exclusive_release(inode, file); - /* Added some delay here, since opening/closing the camera quickly, * like Ekiga does during its startup, can crash the webcam */ mdelay(100); + err = 0; +out: mutex_unlock(&cam->lock); - return 0; + return err; } -- cgit v0.10.2 From 8466028be7926679ff794ec2ed7a8938eafba521 Mon Sep 17 00:00:00 2001 From: Antoine Jacquet Date: Mon, 11 Aug 2008 13:12:19 -0300 Subject: V4L/DVB (8734): Initial support for AME DTV-5100 USB2.0 DVB-T Basic support for AME DTV-5100 USB2.0 DVB-T using the qt1010 tuner and a dummy frontend. Signed-off-by: Antoine Jacquet Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/dvb/dvb-usb/Kconfig b/drivers/media/dvb/dvb-usb/Kconfig index 8a54cb4..1d9e98c 100644 --- a/drivers/media/dvb/dvb-usb/Kconfig +++ b/drivers/media/dvb/dvb-usb/Kconfig @@ -264,3 +264,10 @@ config DVB_USB_ANYSEE help Say Y here to support the Anysee E30, Anysee E30 Plus or Anysee E30 C Plus DVB USB2.0 receiver. + +config DVB_USB_DTV5100 + tristate "AME DTV-5100 USB2.0 DVB-T support" + depends on DVB_USB + select MEDIA_TUNER_QT1010 if !DVB_FE_CUSTOMISE + help + Say Y here to support the AME DTV-5100 USB2.0 DVB-T receiver. diff --git a/drivers/media/dvb/dvb-usb/Makefile b/drivers/media/dvb/dvb-usb/Makefile index e206f1e..5e170fb 100644 --- a/drivers/media/dvb/dvb-usb/Makefile +++ b/drivers/media/dvb/dvb-usb/Makefile @@ -67,6 +67,9 @@ obj-$(CONFIG_DVB_USB_ANYSEE) += dvb-usb-anysee.o dvb-usb-dw2102-objs = dw2102.o obj-$(CONFIG_DVB_USB_DW2102) += dvb-usb-dw2102.o +dvb-usb-dtv5100-objs = dtv5100.o dtv5100-fe.o +obj-$(CONFIG_DVB_USB_DTV5100) += dvb-usb-dtv5100.o + EXTRA_CFLAGS += -Idrivers/media/dvb/dvb-core/ -Idrivers/media/dvb/frontends/ # due to tuner-xc3028 EXTRA_CFLAGS += -Idrivers/media/common/tuners diff --git a/drivers/media/dvb/dvb-usb/dtv5100-fe.c b/drivers/media/dvb/dvb-usb/dtv5100-fe.c new file mode 100644 index 0000000..08fe33b --- /dev/null +++ b/drivers/media/dvb/dvb-usb/dtv5100-fe.c @@ -0,0 +1,147 @@ +/* + * DVB USB Linux driver for AME DTV-5100 USB2.0 DVB-T + * + * Copyright (C) 2008 Antoine Jacquet + * http://royale.zerezo.com/dtv5100/ + * + * Inspired by dvb_dummy_fe.c + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include "dvb-usb.h" +#include "qt1010_priv.h" + +struct dtv5100_fe_state { + struct dvb_frontend frontend; +}; + +static int dtv5100_fe_read_status(struct dvb_frontend* fe, fe_status_t* status) +{ + *status = FE_HAS_SIGNAL + | FE_HAS_CARRIER + | FE_HAS_VITERBI + | FE_HAS_SYNC + | FE_HAS_LOCK; + + return 0; +} + +static int dtv5100_fe_read_ber(struct dvb_frontend* fe, u32* ber) +{ + *ber = 0; + return 0; +} + +static int dtv5100_fe_read_signal_strength(struct dvb_frontend* fe, u16* strength) +{ + *strength = 0; + return 0; +} + +static int dtv5100_fe_read_snr(struct dvb_frontend* fe, u16* snr) +{ + *snr = 0; + return 0; +} + +static int dtv5100_fe_read_ucblocks(struct dvb_frontend* fe, u32* ucblocks) +{ + *ucblocks = 0; + return 0; +} + +static int dtv5100_fe_get_frontend(struct dvb_frontend* fe, struct dvb_frontend_parameters *p) +{ + return 0; +} + +static int dtv5100_fe_set_frontend(struct dvb_frontend* fe, struct dvb_frontend_parameters *p) +{ + if (fe->ops.tuner_ops.set_params) { + fe->ops.tuner_ops.set_params(fe, p); + if (fe->ops.i2c_gate_ctrl) fe->ops.i2c_gate_ctrl(fe, 0); + } + + return 0; +} + +static int dtv5100_fe_sleep(struct dvb_frontend* fe) +{ + return 0; +} + +static int dtv5100_fe_init(struct dvb_frontend* fe) +{ + return 0; +} + +static void dtv5100_fe_release(struct dvb_frontend* fe) +{ + struct dtv5100_fe_state* state = fe->demodulator_priv; + kfree(state); +} + +static struct dvb_frontend_ops dtv5100_fe_ops; + +struct dvb_frontend* dtv5100_fe_attach(void) +{ + struct dtv5100_fe_state* state = NULL; + + /* allocate memory for the internal state */ + state = kmalloc(sizeof(struct dtv5100_fe_state), GFP_KERNEL); + if (state == NULL) goto error; + + /* create dvb_frontend */ + memcpy(&state->frontend.ops, &dtv5100_fe_ops, sizeof(struct dvb_frontend_ops)); + state->frontend.demodulator_priv = state; + return &state->frontend; + +error: + kfree(state); + return NULL; +} + +static struct dvb_frontend_ops dtv5100_fe_ops = { + + .info = { + .name = "Dummy DVB-T", + .type = FE_OFDM, + .frequency_min = QT1010_MIN_FREQ, + .frequency_max = QT1010_MAX_FREQ, + .frequency_stepsize = QT1010_STEP, + .caps = FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 | + FE_CAN_FEC_4_5 | FE_CAN_FEC_5_6 | FE_CAN_FEC_6_7 | + FE_CAN_FEC_7_8 | FE_CAN_FEC_8_9 | FE_CAN_FEC_AUTO | + FE_CAN_QAM_16 | FE_CAN_QAM_64 | FE_CAN_QAM_AUTO | + FE_CAN_TRANSMISSION_MODE_AUTO | + FE_CAN_GUARD_INTERVAL_AUTO | + FE_CAN_HIERARCHY_AUTO, + }, + + .release = dtv5100_fe_release, + + .init = dtv5100_fe_init, + .sleep = dtv5100_fe_sleep, + + .set_frontend = dtv5100_fe_set_frontend, + .get_frontend = dtv5100_fe_get_frontend, + + .read_status = dtv5100_fe_read_status, + .read_ber = dtv5100_fe_read_ber, + .read_signal_strength = dtv5100_fe_read_signal_strength, + .read_snr = dtv5100_fe_read_snr, + .read_ucblocks = dtv5100_fe_read_ucblocks, +}; diff --git a/drivers/media/dvb/dvb-usb/dtv5100.c b/drivers/media/dvb/dvb-usb/dtv5100.c new file mode 100644 index 0000000..f89d017 --- /dev/null +++ b/drivers/media/dvb/dvb-usb/dtv5100.c @@ -0,0 +1,217 @@ +/* + * DVB USB Linux driver for AME DTV-5100 USB2.0 DVB-T + * + * Copyright (C) 2008 Antoine Jacquet + * http://royale.zerezo.com/dtv5100/ + * + * Inspired by gl861.c and au6610.c drivers + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include "dtv5100.h" +#include "qt1010.h" + +/* debug */ +static int dvb_usb_dtv5100_debug; +module_param_named(debug, dvb_usb_dtv5100_debug, int, 0644); +MODULE_PARM_DESC(debug, "set debugging level" DVB_USB_DEBUG_STATUS); +DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); + +static int dtv5100_read_reg(struct dvb_usb_device *d, u8 addr, u8 reg, u8 *value) +{ + return usb_control_msg(d->udev, usb_rcvctrlpipe(d->udev, 0), + DTV5100_I2C_READ, USB_TYPE_VENDOR|USB_DIR_IN, + 0, (addr << 8) + reg, value, 1, + DTV5100_USB_TIMEOUT); +} + +static int dtv5100_write_reg(struct dvb_usb_device *d, u8 addr, u8 reg, u8 value) +{ + return usb_control_msg(d->udev, usb_rcvctrlpipe(d->udev, 0), + DTV5100_I2C_WRITE, USB_TYPE_VENDOR|USB_DIR_OUT, + value, (addr << 8) + reg, NULL, 0, + DTV5100_USB_TIMEOUT); +} + +/* I2C */ +static int dtv5100_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msg[], + int num) +{ + struct dvb_usb_device *d = i2c_get_adapdata(adap); + int i; + + if (num > 2) + return -EINVAL; + + if (mutex_lock_interruptible(&d->i2c_mutex) < 0) + return -EAGAIN; + + for (i = 0; i < num; i++) { + if (i+1 < num && (msg[i+1].flags & I2C_M_RD)) { + /* write/read request, 2 messages + * msg = { + * { reg }, + * { val }, + * } + */ + if (dtv5100_read_reg(d, msg[i].addr, msg[i].buf[0], msg[i+1].buf) < 0) + break; + i++; + } else { + /* write request, 1 message + * msg = { + * { reg, val }, + * } + */ + if (dtv5100_write_reg(d, msg[i].addr, msg[i].buf[0], msg[i].buf[1]) < 0) + break; + } + } + + mutex_unlock(&d->i2c_mutex); + return i; +} + +static u32 dtv5100_i2c_func(struct i2c_adapter *adapter) +{ + return I2C_FUNC_I2C; +} + +static struct i2c_algorithm dtv5100_i2c_algo = { + .master_xfer = dtv5100_i2c_xfer, + .functionality = dtv5100_i2c_func, +}; + +/* Callbacks for DVB USB */ +static int dtv5100_frontend_attach(struct dvb_usb_adapter *adap) +{ + adap->fe = dtv5100_fe_attach(); + return 0; +} + +static struct qt1010_config dtv5100_qt1010_config = { + .i2c_address = 0xc4 +}; + +static int dtv5100_tuner_attach(struct dvb_usb_adapter *adap) +{ + return dvb_attach(qt1010_attach, + adap->fe, &adap->dev->i2c_adap, + &dtv5100_qt1010_config) == NULL ? -ENODEV : 0; +} + +/* DVB USB Driver stuff */ +static struct dvb_usb_device_properties dtv5100_properties; + +static int dtv5100_probe(struct usb_interface *intf, + const struct usb_device_id *id) +{ + int i, ret; + struct usb_device *udev = interface_to_usbdev(intf); + + ret = dvb_usb_device_init(intf, &dtv5100_properties, + THIS_MODULE, NULL, adapter_nr); + if (ret) + return ret; + + /* initialize frontend & non qt1010 part? */ + for (i = 0; dtv5100_init[i].request; i++) + { + ret = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), + dtv5100_init[i].request, + USB_TYPE_VENDOR|USB_DIR_OUT, + dtv5100_init[i].value, + dtv5100_init[i].index, NULL, 0, + DTV5100_USB_TIMEOUT); + if (ret) + return ret; + } + + return 0; +} + +static struct usb_device_id dtv5100_table [] = { + { USB_DEVICE(0x06be, 0xa232) }, + { } /* Terminating entry */ +}; +MODULE_DEVICE_TABLE(usb, dtv5100_table); + +static struct dvb_usb_device_properties dtv5100_properties = { + .caps = DVB_USB_IS_AN_I2C_ADAPTER, + .usb_ctrl = DEVICE_SPECIFIC, + + .size_of_priv = 0, + + .num_adapters = 1, + .adapter = {{ + .frontend_attach = dtv5100_frontend_attach, + .tuner_attach = dtv5100_tuner_attach, + + .stream = { + .type = USB_BULK, + .count = 8, + .endpoint = 0x82, + .u = { + .bulk = { + .buffersize = 4096, + } + } + }, + } }, + + .i2c_algo = &dtv5100_i2c_algo, + + .num_device_descs = 1, + .devices = { + { + .name = "AME DTV-5100 USB2.0 DVB-T", + .cold_ids = { NULL }, + .warm_ids = { &dtv5100_table[0], NULL }, + }, + } +}; + +static struct usb_driver dtv5100_driver = { + .name = "dvb_usb_dtv5100", + .probe = dtv5100_probe, + .disconnect = dvb_usb_device_exit, + .id_table = dtv5100_table, +}; + +/* module stuff */ +static int __init dtv5100_module_init(void) +{ + int ret; + + ret = usb_register(&dtv5100_driver); + if (ret) + err("usb_register failed. Error number %d", ret); + + return ret; +} + +static void __exit dtv5100_module_exit(void) +{ + /* deregister this driver from the USB subsystem */ + usb_deregister(&dtv5100_driver); +} + +module_init(dtv5100_module_init); +module_exit(dtv5100_module_exit); + +MODULE_AUTHOR(DRIVER_AUTHOR); +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/dvb/dvb-usb/dtv5100.h b/drivers/media/dvb/dvb-usb/dtv5100.h new file mode 100644 index 0000000..1aadb86 --- /dev/null +++ b/drivers/media/dvb/dvb-usb/dtv5100.h @@ -0,0 +1,128 @@ +/* + * DVB USB Linux driver for AME DTV-5100 USB2.0 DVB-T + * + * Copyright (C) 2008 Antoine Jacquet + * http://royale.zerezo.com/dtv5100/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef _DVB_USB_DTV5100_H_ +#define _DVB_USB_DTV5100_H_ + +#define DVB_USB_LOG_PREFIX "dtv5100" +#include "dvb-usb.h" + +#define DTV5100_USB_TIMEOUT 500 +#define DTV5100_I2C_WRITE 0xc7 +#define DTV5100_I2C_READ 0xc8 + +#define DRIVER_AUTHOR "Antoine Jacquet, http://royale.zerezo.com/" +#define DRIVER_DESC "AME DTV-5100 USB2.0 DVB-T" + +static struct { + u8 request; + u8 value; + u16 index; +} dtv5100_init[] = { + { 0x000000c5, 0x00000000, 0x00000001 }, + { 0x000000c5, 0x00000001, 0x00000001 }, + { 0x000000c0, 0x0000000b, 0x00000050 }, + { 0x000000c0, 0x00000044, 0x00000051 }, + { 0x000000c0, 0x00000046, 0x00000052 }, + { 0x000000c0, 0x00000015, 0x00000053 }, + { 0x000000c0, 0x0000000f, 0x00000054 }, + { 0x000000c0, 0x00000080, 0x00000055 }, + { 0x000000c0, 0x00000001, 0x000000ea }, + { 0x000000c0, 0x00000000, 0x000000ea }, + { 0x000000c0, 0x00000075, 0x0000005c }, + { 0x000000c0, 0x000000a1, 0x0000009c }, + { 0x000000c0, 0x00000000, 0x0000008e }, + { 0x000000c0, 0x00000000, 0x00000090 }, + { 0x000000c0, 0x000000ff, 0x00000091 }, + { 0x000000c0, 0x000000ff, 0x00000092 }, + { 0x000000c0, 0x00000000, 0x00000093 }, + { 0x000000c0, 0x000000ff, 0x00000094 }, + { 0x000000c0, 0x00000000, 0x00000058 }, + { 0x000000c0, 0x0000003f, 0x00000095 }, + { 0x000000c0, 0x0000003f, 0x00000096 }, + { 0x000000c0, 0x0000000c, 0x0000005a }, + { 0x000000c0, 0x0000002b, 0x00000056 }, + { 0x000000c0, 0x00000017, 0x0000005f }, + { 0x000000c0, 0x00000040, 0x0000005e }, + { 0x000000c0, 0x00000036, 0x00000064 }, + { 0x000000c0, 0x00000067, 0x00000065 }, + { 0x000000c0, 0x000000e5, 0x00000066 }, + { 0x000000c0, 0x00000073, 0x000000cc }, + { 0x000000c0, 0x000000cd, 0x0000006c }, + { 0x000000c0, 0x0000007e, 0x0000006d }, + { 0x000000c0, 0x00000001, 0x00000071 }, + { 0x000000c0, 0x00000001, 0x00000070 }, + /**/ + { 0x000000c7, 0x00000080, 0x0000c401 }, + { 0x000000c7, 0x0000003f, 0x0000c402 }, + { 0x000000c7, 0x00000034, 0x0000c405 }, // 2 + { 0x000000c7, 0x00000044, 0x0000c406 }, + { 0x000000c7, 0x00000038, 0x0000c407 }, // 4 + { 0x000000c7, 0x00000008, 0x0000c408 }, + { 0x000000c7, 0x0000001c, 0x0000c409 }, // 6 + { 0x000000c7, 0x0000000d, 0x0000c40a }, // 7 + { 0x000000c7, 0x00000045, 0x0000c40b }, // 8 + { 0x000000c7, 0x000000e1, 0x0000c40c }, + { 0x000000c7, 0x00000078, 0x0000c41a }, // 10 + { 0x000000c7, 0x00000000, 0x0000c41b }, + { 0x000000c7, 0x00000089, 0x0000c41c }, + { 0x000000c7, 0x000000fd, 0x0000c411 }, // 13 + { 0x000000c7, 0x00000095, 0x0000c412 }, // 14 + { 0x000000c7, 0x000000d6, 0x0000c422 }, // 15 + { 0x000000c7, 0x00000000, 0x0000c41e }, + { 0x000000c7, 0x000000d0, 0x0000c41e }, + { 0x000000c8, 0x00000000, 0x0000c422 }, + { 0x000000c7, 0x00000000, 0x0000c41e }, + { 0x000000c8, 0x00000000, 0x0000c405 }, + { 0x000000c8, 0x00000000, 0x0000c422 }, + { 0x000000c7, 0x000000d0, 0x0000c423 }, + { 0x000000c7, 0x00000000, 0x0000c41e }, + { 0x000000c7, 0x000000e0, 0x0000c41e }, + { 0x000000c8, 0x00000000, 0x0000c423 }, + { 0x000000c8, 0x00000000, 0x0000c423 }, + { 0x000000c7, 0x00000000, 0x0000c41e }, + { 0x000000c7, 0x000000d0, 0x0000c424 }, + { 0x000000c7, 0x00000000, 0x0000c41e }, + { 0x000000c7, 0x000000f0, 0x0000c41e }, + { 0x000000c8, 0x00000000, 0x0000c424 }, + { 0x000000c7, 0x00000000, 0x0000c41e }, + { 0x000000c7, 0x0000007f, 0x0000c414 }, + { 0x000000c7, 0x0000007f, 0x0000c415 }, + { 0x000000c7, 0x00000030, 0x0000c405 }, + { 0x000000c7, 0x00000000, 0x0000c406 }, + { 0x000000c7, 0x0000001f, 0x0000c415 }, + { 0x000000c7, 0x000000ff, 0x0000c416 }, + { 0x000000c7, 0x000000ff, 0x0000c418 }, + { 0x000000c7, 0x00000051, 0x0000c41f }, // here + { 0x000000c7, 0x00000016, 0x0000c420 }, // here + { 0x000000c7, 0x00000053, 0x0000c421 }, + { 0x000000c7, 0x000000c1, 0x0000c425 }, // here + { 0x000000c7, 0x00000014, 0x0000c426 }, // here + { 0x000000c7, 0x00000082, 0x0000c400 }, + { 0x000000c7, 0x00000000, 0x0000c402 }, + { 0x000000c7, 0x00000000, 0x0000c401 }, + /**/ + { } /* Terminating entry */ +}; + +extern struct dvb_frontend* dtv5100_fe_attach(void); + +#endif -- cgit v0.10.2 From 60688d5e6e6e2ae62f29762d1e3b2aec2dbd3817 Mon Sep 17 00:00:00 2001 From: Antoine Jacquet Date: Mon, 11 Aug 2008 19:21:33 -0300 Subject: V4L/DVB (8735): dtv5100: replace dummy frontend by zl10353 Remove the dtv5100-fe.c dummy frontend and replace it by the real frontend for the chipset. Signed-off-by: Antoine Jacquet Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/dvb/dvb-usb/Makefile b/drivers/media/dvb/dvb-usb/Makefile index 5e170fb..116544f 100644 --- a/drivers/media/dvb/dvb-usb/Makefile +++ b/drivers/media/dvb/dvb-usb/Makefile @@ -67,7 +67,7 @@ obj-$(CONFIG_DVB_USB_ANYSEE) += dvb-usb-anysee.o dvb-usb-dw2102-objs = dw2102.o obj-$(CONFIG_DVB_USB_DW2102) += dvb-usb-dw2102.o -dvb-usb-dtv5100-objs = dtv5100.o dtv5100-fe.o +dvb-usb-dtv5100-objs = dtv5100.o obj-$(CONFIG_DVB_USB_DTV5100) += dvb-usb-dtv5100.o EXTRA_CFLAGS += -Idrivers/media/dvb/dvb-core/ -Idrivers/media/dvb/frontends/ diff --git a/drivers/media/dvb/dvb-usb/dtv5100-fe.c b/drivers/media/dvb/dvb-usb/dtv5100-fe.c deleted file mode 100644 index 08fe33b..0000000 --- a/drivers/media/dvb/dvb-usb/dtv5100-fe.c +++ /dev/null @@ -1,147 +0,0 @@ -/* - * DVB USB Linux driver for AME DTV-5100 USB2.0 DVB-T - * - * Copyright (C) 2008 Antoine Jacquet - * http://royale.zerezo.com/dtv5100/ - * - * Inspired by dvb_dummy_fe.c - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#include "dvb-usb.h" -#include "qt1010_priv.h" - -struct dtv5100_fe_state { - struct dvb_frontend frontend; -}; - -static int dtv5100_fe_read_status(struct dvb_frontend* fe, fe_status_t* status) -{ - *status = FE_HAS_SIGNAL - | FE_HAS_CARRIER - | FE_HAS_VITERBI - | FE_HAS_SYNC - | FE_HAS_LOCK; - - return 0; -} - -static int dtv5100_fe_read_ber(struct dvb_frontend* fe, u32* ber) -{ - *ber = 0; - return 0; -} - -static int dtv5100_fe_read_signal_strength(struct dvb_frontend* fe, u16* strength) -{ - *strength = 0; - return 0; -} - -static int dtv5100_fe_read_snr(struct dvb_frontend* fe, u16* snr) -{ - *snr = 0; - return 0; -} - -static int dtv5100_fe_read_ucblocks(struct dvb_frontend* fe, u32* ucblocks) -{ - *ucblocks = 0; - return 0; -} - -static int dtv5100_fe_get_frontend(struct dvb_frontend* fe, struct dvb_frontend_parameters *p) -{ - return 0; -} - -static int dtv5100_fe_set_frontend(struct dvb_frontend* fe, struct dvb_frontend_parameters *p) -{ - if (fe->ops.tuner_ops.set_params) { - fe->ops.tuner_ops.set_params(fe, p); - if (fe->ops.i2c_gate_ctrl) fe->ops.i2c_gate_ctrl(fe, 0); - } - - return 0; -} - -static int dtv5100_fe_sleep(struct dvb_frontend* fe) -{ - return 0; -} - -static int dtv5100_fe_init(struct dvb_frontend* fe) -{ - return 0; -} - -static void dtv5100_fe_release(struct dvb_frontend* fe) -{ - struct dtv5100_fe_state* state = fe->demodulator_priv; - kfree(state); -} - -static struct dvb_frontend_ops dtv5100_fe_ops; - -struct dvb_frontend* dtv5100_fe_attach(void) -{ - struct dtv5100_fe_state* state = NULL; - - /* allocate memory for the internal state */ - state = kmalloc(sizeof(struct dtv5100_fe_state), GFP_KERNEL); - if (state == NULL) goto error; - - /* create dvb_frontend */ - memcpy(&state->frontend.ops, &dtv5100_fe_ops, sizeof(struct dvb_frontend_ops)); - state->frontend.demodulator_priv = state; - return &state->frontend; - -error: - kfree(state); - return NULL; -} - -static struct dvb_frontend_ops dtv5100_fe_ops = { - - .info = { - .name = "Dummy DVB-T", - .type = FE_OFDM, - .frequency_min = QT1010_MIN_FREQ, - .frequency_max = QT1010_MAX_FREQ, - .frequency_stepsize = QT1010_STEP, - .caps = FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 | - FE_CAN_FEC_4_5 | FE_CAN_FEC_5_6 | FE_CAN_FEC_6_7 | - FE_CAN_FEC_7_8 | FE_CAN_FEC_8_9 | FE_CAN_FEC_AUTO | - FE_CAN_QAM_16 | FE_CAN_QAM_64 | FE_CAN_QAM_AUTO | - FE_CAN_TRANSMISSION_MODE_AUTO | - FE_CAN_GUARD_INTERVAL_AUTO | - FE_CAN_HIERARCHY_AUTO, - }, - - .release = dtv5100_fe_release, - - .init = dtv5100_fe_init, - .sleep = dtv5100_fe_sleep, - - .set_frontend = dtv5100_fe_set_frontend, - .get_frontend = dtv5100_fe_get_frontend, - - .read_status = dtv5100_fe_read_status, - .read_ber = dtv5100_fe_read_ber, - .read_signal_strength = dtv5100_fe_read_signal_strength, - .read_snr = dtv5100_fe_read_snr, - .read_ucblocks = dtv5100_fe_read_ucblocks, -}; diff --git a/drivers/media/dvb/dvb-usb/dtv5100.c b/drivers/media/dvb/dvb-usb/dtv5100.c index f89d017..7168a49c 100644 --- a/drivers/media/dvb/dvb-usb/dtv5100.c +++ b/drivers/media/dvb/dvb-usb/dtv5100.c @@ -22,6 +22,7 @@ */ #include "dtv5100.h" +#include "zl10353.h" #include "qt1010.h" /* debug */ @@ -30,25 +31,44 @@ module_param_named(debug, dvb_usb_dtv5100_debug, int, 0644); MODULE_PARM_DESC(debug, "set debugging level" DVB_USB_DEBUG_STATUS); DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); -static int dtv5100_read_reg(struct dvb_usb_device *d, u8 addr, u8 reg, u8 *value) +static int dtv5100_i2c_msg(struct dvb_usb_device *d, u8 addr, + u8 *wbuf, u16 wlen, u8 *rbuf, u16 rlen) { - return usb_control_msg(d->udev, usb_rcvctrlpipe(d->udev, 0), - DTV5100_I2C_READ, USB_TYPE_VENDOR|USB_DIR_IN, - 0, (addr << 8) + reg, value, 1, - DTV5100_USB_TIMEOUT); -} + u8 request; + u8 type; + u16 value; + u16 index; + + switch (wlen) { + case 1: + /* write { reg }, read { value } */ + request = (addr == DTV5100_DEMOD_ADDR ? DTV5100_DEMOD_READ : + DTV5100_TUNER_READ); + type = USB_TYPE_VENDOR|USB_DIR_IN; + value = 0; + break; + case 2: + /* write { reg, value } */ + request = (addr == DTV5100_DEMOD_ADDR ? DTV5100_DEMOD_WRITE : + DTV5100_TUNER_WRITE); + type = USB_TYPE_VENDOR|USB_DIR_OUT; + value = wbuf[1]; + break; + default: + warn("wlen = %x, aborting.", wlen); + return -EINVAL; + } + index = (addr << 8) + wbuf[0]; -static int dtv5100_write_reg(struct dvb_usb_device *d, u8 addr, u8 reg, u8 value) -{ - return usb_control_msg(d->udev, usb_rcvctrlpipe(d->udev, 0), - DTV5100_I2C_WRITE, USB_TYPE_VENDOR|USB_DIR_OUT, - value, (addr << 8) + reg, NULL, 0, + msleep(1); /* avoid I2C errors */ + return usb_control_msg(d->udev, usb_rcvctrlpipe(d->udev, 0), request, + type, value, index, rbuf, rlen, DTV5100_USB_TIMEOUT); } /* I2C */ static int dtv5100_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msg[], - int num) + int num) { struct dvb_usb_device *d = i2c_get_adapdata(adap); int i; @@ -60,25 +80,16 @@ static int dtv5100_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msg[], return -EAGAIN; for (i = 0; i < num; i++) { + /* write/read request */ if (i+1 < num && (msg[i+1].flags & I2C_M_RD)) { - /* write/read request, 2 messages - * msg = { - * { reg }, - * { val }, - * } - */ - if (dtv5100_read_reg(d, msg[i].addr, msg[i].buf[0], msg[i+1].buf) < 0) + if (dtv5100_i2c_msg(d, msg[i].addr, msg[i].buf, + msg[i].len, msg[i+1].buf, + msg[i+1].len) < 0) break; i++; - } else { - /* write request, 1 message - * msg = { - * { reg, val }, - * } - */ - if (dtv5100_write_reg(d, msg[i].addr, msg[i].buf[0], msg[i].buf[1]) < 0) + } else if (dtv5100_i2c_msg(d, msg[i].addr, msg[i].buf, + msg[i].len, NULL, 0) < 0) break; - } } mutex_unlock(&d->i2c_mutex); @@ -96,14 +107,27 @@ static struct i2c_algorithm dtv5100_i2c_algo = { }; /* Callbacks for DVB USB */ +static struct zl10353_config dtv5100_zl10353_config = { + .demod_address = DTV5100_DEMOD_ADDR, + .no_tuner = 1, + .parallel_ts = 1, +}; + static int dtv5100_frontend_attach(struct dvb_usb_adapter *adap) { - adap->fe = dtv5100_fe_attach(); + adap->fe = dvb_attach(zl10353_attach, &dtv5100_zl10353_config, + &adap->dev->i2c_adap); + if (adap->fe == NULL) + return -EIO; + + /* disable i2c gate, or it won't work... is this safe? */ + adap->fe->ops.i2c_gate_ctrl = NULL; + return 0; } static struct qt1010_config dtv5100_qt1010_config = { - .i2c_address = 0xc4 + .i2c_address = DTV5100_TUNER_ADDR }; static int dtv5100_tuner_attach(struct dvb_usb_adapter *adap) @@ -122,12 +146,7 @@ static int dtv5100_probe(struct usb_interface *intf, int i, ret; struct usb_device *udev = interface_to_usbdev(intf); - ret = dvb_usb_device_init(intf, &dtv5100_properties, - THIS_MODULE, NULL, adapter_nr); - if (ret) - return ret; - - /* initialize frontend & non qt1010 part? */ + /* initialize non qt1010/zl10353 part? */ for (i = 0; dtv5100_init[i].request; i++) { ret = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), @@ -140,6 +159,11 @@ static int dtv5100_probe(struct usb_interface *intf, return ret; } + ret = dvb_usb_device_init(intf, &dtv5100_properties, + THIS_MODULE, NULL, adapter_nr); + if (ret) + return ret; + return 0; } diff --git a/drivers/media/dvb/dvb-usb/dtv5100.h b/drivers/media/dvb/dvb-usb/dtv5100.h index 1aadb86..e36bf2d 100644 --- a/drivers/media/dvb/dvb-usb/dtv5100.h +++ b/drivers/media/dvb/dvb-usb/dtv5100.h @@ -26,8 +26,14 @@ #include "dvb-usb.h" #define DTV5100_USB_TIMEOUT 500 -#define DTV5100_I2C_WRITE 0xc7 -#define DTV5100_I2C_READ 0xc8 + +#define DTV5100_DEMOD_ADDR 0x00 +#define DTV5100_DEMOD_WRITE 0xc0 +#define DTV5100_DEMOD_READ 0xc1 + +#define DTV5100_TUNER_ADDR 0xc4 +#define DTV5100_TUNER_WRITE 0xc7 +#define DTV5100_TUNER_READ 0xc8 #define DRIVER_AUTHOR "Antoine Jacquet, http://royale.zerezo.com/" #define DRIVER_DESC "AME DTV-5100 USB2.0 DVB-T" @@ -39,87 +45,6 @@ static struct { } dtv5100_init[] = { { 0x000000c5, 0x00000000, 0x00000001 }, { 0x000000c5, 0x00000001, 0x00000001 }, - { 0x000000c0, 0x0000000b, 0x00000050 }, - { 0x000000c0, 0x00000044, 0x00000051 }, - { 0x000000c0, 0x00000046, 0x00000052 }, - { 0x000000c0, 0x00000015, 0x00000053 }, - { 0x000000c0, 0x0000000f, 0x00000054 }, - { 0x000000c0, 0x00000080, 0x00000055 }, - { 0x000000c0, 0x00000001, 0x000000ea }, - { 0x000000c0, 0x00000000, 0x000000ea }, - { 0x000000c0, 0x00000075, 0x0000005c }, - { 0x000000c0, 0x000000a1, 0x0000009c }, - { 0x000000c0, 0x00000000, 0x0000008e }, - { 0x000000c0, 0x00000000, 0x00000090 }, - { 0x000000c0, 0x000000ff, 0x00000091 }, - { 0x000000c0, 0x000000ff, 0x00000092 }, - { 0x000000c0, 0x00000000, 0x00000093 }, - { 0x000000c0, 0x000000ff, 0x00000094 }, - { 0x000000c0, 0x00000000, 0x00000058 }, - { 0x000000c0, 0x0000003f, 0x00000095 }, - { 0x000000c0, 0x0000003f, 0x00000096 }, - { 0x000000c0, 0x0000000c, 0x0000005a }, - { 0x000000c0, 0x0000002b, 0x00000056 }, - { 0x000000c0, 0x00000017, 0x0000005f }, - { 0x000000c0, 0x00000040, 0x0000005e }, - { 0x000000c0, 0x00000036, 0x00000064 }, - { 0x000000c0, 0x00000067, 0x00000065 }, - { 0x000000c0, 0x000000e5, 0x00000066 }, - { 0x000000c0, 0x00000073, 0x000000cc }, - { 0x000000c0, 0x000000cd, 0x0000006c }, - { 0x000000c0, 0x0000007e, 0x0000006d }, - { 0x000000c0, 0x00000001, 0x00000071 }, - { 0x000000c0, 0x00000001, 0x00000070 }, - /**/ - { 0x000000c7, 0x00000080, 0x0000c401 }, - { 0x000000c7, 0x0000003f, 0x0000c402 }, - { 0x000000c7, 0x00000034, 0x0000c405 }, // 2 - { 0x000000c7, 0x00000044, 0x0000c406 }, - { 0x000000c7, 0x00000038, 0x0000c407 }, // 4 - { 0x000000c7, 0x00000008, 0x0000c408 }, - { 0x000000c7, 0x0000001c, 0x0000c409 }, // 6 - { 0x000000c7, 0x0000000d, 0x0000c40a }, // 7 - { 0x000000c7, 0x00000045, 0x0000c40b }, // 8 - { 0x000000c7, 0x000000e1, 0x0000c40c }, - { 0x000000c7, 0x00000078, 0x0000c41a }, // 10 - { 0x000000c7, 0x00000000, 0x0000c41b }, - { 0x000000c7, 0x00000089, 0x0000c41c }, - { 0x000000c7, 0x000000fd, 0x0000c411 }, // 13 - { 0x000000c7, 0x00000095, 0x0000c412 }, // 14 - { 0x000000c7, 0x000000d6, 0x0000c422 }, // 15 - { 0x000000c7, 0x00000000, 0x0000c41e }, - { 0x000000c7, 0x000000d0, 0x0000c41e }, - { 0x000000c8, 0x00000000, 0x0000c422 }, - { 0x000000c7, 0x00000000, 0x0000c41e }, - { 0x000000c8, 0x00000000, 0x0000c405 }, - { 0x000000c8, 0x00000000, 0x0000c422 }, - { 0x000000c7, 0x000000d0, 0x0000c423 }, - { 0x000000c7, 0x00000000, 0x0000c41e }, - { 0x000000c7, 0x000000e0, 0x0000c41e }, - { 0x000000c8, 0x00000000, 0x0000c423 }, - { 0x000000c8, 0x00000000, 0x0000c423 }, - { 0x000000c7, 0x00000000, 0x0000c41e }, - { 0x000000c7, 0x000000d0, 0x0000c424 }, - { 0x000000c7, 0x00000000, 0x0000c41e }, - { 0x000000c7, 0x000000f0, 0x0000c41e }, - { 0x000000c8, 0x00000000, 0x0000c424 }, - { 0x000000c7, 0x00000000, 0x0000c41e }, - { 0x000000c7, 0x0000007f, 0x0000c414 }, - { 0x000000c7, 0x0000007f, 0x0000c415 }, - { 0x000000c7, 0x00000030, 0x0000c405 }, - { 0x000000c7, 0x00000000, 0x0000c406 }, - { 0x000000c7, 0x0000001f, 0x0000c415 }, - { 0x000000c7, 0x000000ff, 0x0000c416 }, - { 0x000000c7, 0x000000ff, 0x0000c418 }, - { 0x000000c7, 0x00000051, 0x0000c41f }, // here - { 0x000000c7, 0x00000016, 0x0000c420 }, // here - { 0x000000c7, 0x00000053, 0x0000c421 }, - { 0x000000c7, 0x000000c1, 0x0000c425 }, // here - { 0x000000c7, 0x00000014, 0x0000c426 }, // here - { 0x000000c7, 0x00000082, 0x0000c400 }, - { 0x000000c7, 0x00000000, 0x0000c402 }, - { 0x000000c7, 0x00000000, 0x0000c401 }, - /**/ { } /* Terminating entry */ }; -- cgit v0.10.2 From 736949862ceda7b6a9e5a867f81898e90be919d0 Mon Sep 17 00:00:00 2001 From: Antoine Jacquet Date: Tue, 12 Aug 2008 16:56:34 -0300 Subject: V4L/DVB (8736): dtv5100: CodingStyle cleanups Signed-off-by: Antoine Jacquet Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/dvb/dvb-usb/dtv5100.c b/drivers/media/dvb/dvb-usb/dtv5100.c index 7168a49c..b2e6f7f 100644 --- a/drivers/media/dvb/dvb-usb/dtv5100.c +++ b/drivers/media/dvb/dvb-usb/dtv5100.c @@ -32,7 +32,7 @@ MODULE_PARM_DESC(debug, "set debugging level" DVB_USB_DEBUG_STATUS); DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); static int dtv5100_i2c_msg(struct dvb_usb_device *d, u8 addr, - u8 *wbuf, u16 wlen, u8 *rbuf, u16 rlen) + u8 *wbuf, u16 wlen, u8 *rbuf, u16 rlen) { u8 request; u8 type; @@ -44,14 +44,14 @@ static int dtv5100_i2c_msg(struct dvb_usb_device *d, u8 addr, /* write { reg }, read { value } */ request = (addr == DTV5100_DEMOD_ADDR ? DTV5100_DEMOD_READ : DTV5100_TUNER_READ); - type = USB_TYPE_VENDOR|USB_DIR_IN; + type = USB_TYPE_VENDOR | USB_DIR_IN; value = 0; break; case 2: /* write { reg, value } */ request = (addr == DTV5100_DEMOD_ADDR ? DTV5100_DEMOD_WRITE : DTV5100_TUNER_WRITE); - type = USB_TYPE_VENDOR|USB_DIR_OUT; + type = USB_TYPE_VENDOR | USB_DIR_OUT; value = wbuf[1]; break; default: @@ -68,7 +68,7 @@ static int dtv5100_i2c_msg(struct dvb_usb_device *d, u8 addr, /* I2C */ static int dtv5100_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msg[], - int num) + int num) { struct dvb_usb_device *d = i2c_get_adapdata(adap); int i; @@ -116,7 +116,7 @@ static struct zl10353_config dtv5100_zl10353_config = { static int dtv5100_frontend_attach(struct dvb_usb_adapter *adap) { adap->fe = dvb_attach(zl10353_attach, &dtv5100_zl10353_config, - &adap->dev->i2c_adap); + &adap->dev->i2c_adap); if (adap->fe == NULL) return -EIO; @@ -147,11 +147,10 @@ static int dtv5100_probe(struct usb_interface *intf, struct usb_device *udev = interface_to_usbdev(intf); /* initialize non qt1010/zl10353 part? */ - for (i = 0; dtv5100_init[i].request; i++) - { + for (i = 0; dtv5100_init[i].request; i++) { ret = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), dtv5100_init[i].request, - USB_TYPE_VENDOR|USB_DIR_OUT, + USB_TYPE_VENDOR | USB_DIR_OUT, dtv5100_init[i].value, dtv5100_init[i].index, NULL, 0, DTV5100_USB_TIMEOUT); -- cgit v0.10.2 From 5ebcfa4f92ed06129d9439198f65456abe1bfe3a Mon Sep 17 00:00:00 2001 From: Antoine Jacquet Date: Mon, 18 Aug 2008 18:22:00 -0300 Subject: V4L/DVB (8738): dtv5100: remove old definition from header Signed-off-by: Antoine Jacquet Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/dvb/dvb-usb/dtv5100.h b/drivers/media/dvb/dvb-usb/dtv5100.h index e36bf2d..93e96e0 100644 --- a/drivers/media/dvb/dvb-usb/dtv5100.h +++ b/drivers/media/dvb/dvb-usb/dtv5100.h @@ -48,6 +48,4 @@ static struct { { } /* Terminating entry */ }; -extern struct dvb_frontend* dtv5100_fe_attach(void); - #endif -- cgit v0.10.2 From 664b11fc725830b59265cd9ec35a4396514d2b26 Mon Sep 17 00:00:00 2001 From: Antoine Jacquet Date: Mon, 18 Aug 2008 18:38:51 -0300 Subject: V4L/DVB (8739): dtv5100: remove prohibited space... Signed-off-by: Antoine Jacquet Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/dvb/dvb-usb/dtv5100.c b/drivers/media/dvb/dvb-usb/dtv5100.c index b2e6f7f..078ce92 100644 --- a/drivers/media/dvb/dvb-usb/dtv5100.c +++ b/drivers/media/dvb/dvb-usb/dtv5100.c @@ -166,7 +166,7 @@ static int dtv5100_probe(struct usb_interface *intf, return 0; } -static struct usb_device_id dtv5100_table [] = { +static struct usb_device_id dtv5100_table[] = { { USB_DEVICE(0x06be, 0xa232) }, { } /* Terminating entry */ }; -- cgit v0.10.2 From 513edce60f184d90ef4a6d33917264d49c2b07fd Mon Sep 17 00:00:00 2001 From: Harvey Harrison Date: Mon, 18 Aug 2008 17:38:01 -0300 Subject: V4L/DVB (8742): pvrusb2: use proper byteorder interface ___swab32 is an internal detail of the implementation. Acked-by: Mike Isely Signed-off-by: Harvey Harrison Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/pvrusb2/pvrusb2-hdw.c b/drivers/media/video/pvrusb2/pvrusb2-hdw.c index f051c6a..7fa903a 100644 --- a/drivers/media/video/pvrusb2/pvrusb2-hdw.c +++ b/drivers/media/video/pvrusb2/pvrusb2-hdw.c @@ -1314,8 +1314,7 @@ int pvr2_upload_firmware2(struct pvr2_hdw *hdw) memcpy(fw_ptr, fw_entry->data + fw_done, bcnt); /* Usbsnoop log shows that we must swap bytes... */ for (icnt = 0; icnt < bcnt/4 ; icnt++) - ((u32 *)fw_ptr)[icnt] = - ___swab32(((u32 *)fw_ptr)[icnt]); + ((u32 *)fw_ptr)[icnt] = swab32(((u32 *)fw_ptr)[icnt]); ret |= usb_bulk_msg(hdw->usb_dev, pipe, fw_ptr,bcnt, &actual_length, HZ); -- cgit v0.10.2 From 614b147b4f8f38a090f88ac02f67b01225bb5d54 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Fri, 22 Aug 2008 17:01:45 -0300 Subject: V4L/DVB (8745): v4l2: fix a bunch of compile warnings. Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/common/saa7146_core.c b/drivers/media/common/saa7146_core.c index d01965e..d599d36 100644 --- a/drivers/media/common/saa7146_core.c +++ b/drivers/media/common/saa7146_core.c @@ -234,7 +234,7 @@ void saa7146_pgtable_free(struct pci_dev *pci, struct saa7146_pgtable *pt) int saa7146_pgtable_alloc(struct pci_dev *pci, struct saa7146_pgtable *pt) { __le32 *cpu; - dma_addr_t dma_addr; + dma_addr_t dma_addr = 0; cpu = pci_alloc_consistent(pci, PAGE_SIZE, &dma_addr); if (NULL == cpu) { diff --git a/drivers/media/dvb/b2c2/flexcop-dma.c b/drivers/media/dvb/b2c2/flexcop-dma.c index a91ed28..26f0011 100644 --- a/drivers/media/dvb/b2c2/flexcop-dma.c +++ b/drivers/media/dvb/b2c2/flexcop-dma.c @@ -10,7 +10,7 @@ int flexcop_dma_allocate(struct pci_dev *pdev, struct flexcop_dma *dma, u32 size) { u8 *tcpu; - dma_addr_t tdma; + dma_addr_t tdma = 0; if (size % 2) { err("dma buffersize has to be even."); diff --git a/drivers/media/video/btcx-risc.c b/drivers/media/video/btcx-risc.c index 3324ab3..ac1b268 100644 --- a/drivers/media/video/btcx-risc.c +++ b/drivers/media/video/btcx-risc.c @@ -64,7 +64,7 @@ int btcx_riscmem_alloc(struct pci_dev *pci, unsigned int size) { __le32 *cpu; - dma_addr_t dma; + dma_addr_t dma = 0; if (NULL != risc->cpu && risc->size < size) btcx_riscmem_free(pci,risc); diff --git a/drivers/media/video/saa7134/saa7134-core.c b/drivers/media/video/saa7134/saa7134-core.c index 64f20fd..148aa81 100644 --- a/drivers/media/video/saa7134/saa7134-core.c +++ b/drivers/media/video/saa7134/saa7134-core.c @@ -215,7 +215,7 @@ unsigned long saa7134_buffer_base(struct saa7134_buf *buf) int saa7134_pgtable_alloc(struct pci_dev *pci, struct saa7134_pgtable *pt) { __le32 *cpu; - dma_addr_t dma_addr; + dma_addr_t dma_addr = 0; cpu = pci_alloc_consistent(pci, SAA7134_PGTABLE_SIZE, &dma_addr); if (NULL == cpu) -- cgit v0.10.2 From eda9e4e29492aff55ceb3f719a6011bddc60a892 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Fri, 22 Aug 2008 17:12:08 -0300 Subject: V4L/DVB (8746): v4l-dvb: fix compile warnings. Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/dvb/frontends/nxt200x.c b/drivers/media/dvb/frontends/nxt200x.c index af29835..a8429eb 100644 --- a/drivers/media/dvb/frontends/nxt200x.c +++ b/drivers/media/dvb/frontends/nxt200x.c @@ -80,7 +80,7 @@ static int i2c_writebytes (struct nxt200x_state* state, u8 addr, u8 *buf, u8 len return 0; } -static u8 i2c_readbytes (struct nxt200x_state* state, u8 addr, u8* buf, u8 len) +static int i2c_readbytes(struct nxt200x_state *state, u8 addr, u8 *buf, u8 len) { int err; struct i2c_msg msg = { .addr = addr, .flags = I2C_M_RD, .buf = buf, .len = len }; @@ -111,7 +111,7 @@ static int nxt200x_writebytes (struct nxt200x_state* state, u8 reg, return 0; } -static u8 nxt200x_readbytes (struct nxt200x_state* state, u8 reg, u8* buf, u8 len) +static int nxt200x_readbytes(struct nxt200x_state *state, u8 reg, u8 *buf, u8 len) { u8 reg2 [] = { reg }; diff --git a/drivers/media/dvb/frontends/or51211.c b/drivers/media/dvb/frontends/or51211.c index 6afe12a..16cf2fdd 100644 --- a/drivers/media/dvb/frontends/or51211.c +++ b/drivers/media/dvb/frontends/or51211.c @@ -88,7 +88,7 @@ static int i2c_writebytes (struct or51211_state* state, u8 reg, const u8 *buf, return 0; } -static u8 i2c_readbytes (struct or51211_state* state, u8 reg, u8* buf, int len) +static int i2c_readbytes(struct or51211_state *state, u8 reg, u8 *buf, int len) { int err; struct i2c_msg msg; diff --git a/drivers/media/video/vino.c b/drivers/media/video/vino.c index 7072cdf..ca421cc 100644 --- a/drivers/media/video/vino.c +++ b/drivers/media/video/vino.c @@ -809,7 +809,7 @@ static void vino_free_buffer_with_count(struct vino_framebuffer *fb, dprintk("vino_free_buffer_with_count(): count = %d\n", count); for (i = 0; i < count; i++) { - ClearPageReserved(virt_to_page(fb->desc_table.virtual[i])); + ClearPageReserved(virt_to_page((void *)fb->desc_table.virtual[i])); dma_unmap_single(NULL, fb->desc_table.dma_cpu[VINO_PAGE_RATIO * i], PAGE_SIZE, DMA_FROM_DEVICE); @@ -887,7 +887,7 @@ static int vino_allocate_buffer(struct vino_framebuffer *fb, dma_data_addr + VINO_PAGE_SIZE * j; } - SetPageReserved(virt_to_page(fb->desc_table.virtual[i])); + SetPageReserved(virt_to_page((void *)fb->desc_table.virtual[i])); } /* page_count needs to be set anyway, because the descriptor table has @@ -974,7 +974,7 @@ static int vino_prepare_user_buffer(struct vino_framebuffer *fb, dma_data_addr + VINO_PAGE_SIZE * j; } - SetPageReserved(virt_to_page(fb->desc_table.virtual[i])); + SetPageReserved(virt_to_page((void *)fb->desc_table.virtual[i])); } /* page_count needs to be set anyway, because the descriptor table has -- cgit v0.10.2 From ef0e3c26efe9c52de62b96fdad94de3ed70489d0 Mon Sep 17 00:00:00 2001 From: Henrik Kretzschmar Date: Fri, 22 Aug 2008 17:13:05 -0300 Subject: V4L/DVB (8748): V4L: fix return value of meye probe callback The return vaule of the probe function should return -ENOMEM instead of -EBUSY if video_device_alloc() fails. Signed-off-by: Henrik Kretzschmar Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/meye.c b/drivers/media/video/meye.c index cdaff2f..102a5b9 100644 --- a/drivers/media/video/meye.c +++ b/drivers/media/video/meye.c @@ -1779,6 +1779,7 @@ static int __devinit meye_probe(struct pci_dev *pcidev, goto outnotdev; } + ret = -ENOMEM; meye.mchip_dev = pcidev; meye.video_dev = video_device_alloc(); if (!meye.video_dev) { @@ -1786,7 +1787,6 @@ static int __devinit meye_probe(struct pci_dev *pcidev, goto outnotdev; } - ret = -ENOMEM; meye.grab_temp = vmalloc(MCHIP_NB_PAGES_MJPEG * PAGE_SIZE); if (!meye.grab_temp) { printk(KERN_ERR "meye: grab buffer allocation failed\n"); -- cgit v0.10.2 From ee7aa9f821b27674f36fc09413914b68f7ad97ca Mon Sep 17 00:00:00 2001 From: Henrik Kretzschmar Date: Fri, 22 Aug 2008 16:41:03 -0300 Subject: V4L/DVB (8750): V4L: check inval in video_register_device_index() Better check the video_device pointer before using it. Signed-off-by: Henrik Kretzschmar Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/v4l2-dev.c b/drivers/media/video/v4l2-dev.c index 6b9f3cb..8903e41 100644 --- a/drivers/media/video/v4l2-dev.c +++ b/drivers/media/video/v4l2-dev.c @@ -257,6 +257,9 @@ int video_register_device_index(struct video_device *vfd, int type, int nr, if (vfd == NULL) return -EINVAL; + if (vfd == NULL) + return -EINVAL; + switch (type) { case VFL_TYPE_GRABBER: base = MINOR_VFL_TYPE_GRABBER_MIN; -- cgit v0.10.2 From 14d962602c8bf86e63c9b9272be1f0360d0a448a Mon Sep 17 00:00:00 2001 From: Dean Anderson Date: Mon, 25 Aug 2008 13:58:55 -0300 Subject: V4L/DVB (8752): s2255drv: firmware improvement patch Fix for reloading firmware when removing and reloading driver Handshaking for firmware loading and changing modes. Removes the restriction of one user per channel at a time. JPEG capture mode added. Signed-off-by: Dean Anderson Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/s2255drv.c b/drivers/media/video/s2255drv.c index de39cf0..af19bb3 100644 --- a/drivers/media/video/s2255drv.c +++ b/drivers/media/video/s2255drv.c @@ -67,20 +67,21 @@ /* USB endpoint number for configuring the device */ #define S2255_CONFIG_EP 2 /* maximum time for DSP to start responding after last FW word loaded(ms) */ -#define S2255_DSP_BOOTTIME 400 +#define S2255_DSP_BOOTTIME 800 /* maximum time to wait for firmware to load (ms) */ #define S2255_LOAD_TIMEOUT (5000 + S2255_DSP_BOOTTIME) #define S2255_DEF_BUFS 16 +#define S2255_SETMODE_TIMEOUT 500 #define MAX_CHANNELS 4 -#define FRAME_MARKER 0x2255DA4AL -#define MAX_PIPE_USBBLOCK (40 * 1024) -#define DEFAULT_PIPE_USBBLOCK (16 * 1024) +#define S2255_MARKER_FRAME 0x2255DA4AL +#define S2255_MARKER_RESPONSE 0x2255ACACL +#define S2255_USB_XFER_SIZE (16 * 1024) #define MAX_CHANNELS 4 #define MAX_PIPE_BUFFERS 1 #define SYS_FRAMES 4 /* maximum size is PAL full size plus room for the marker header(s) */ -#define SYS_FRAMES_MAXSIZE (720 * 288 * 2 * 2 + 4096) -#define DEF_USB_BLOCK (4096) +#define SYS_FRAMES_MAXSIZE (720*288*2*2 + 4096) +#define DEF_USB_BLOCK S2255_USB_XFER_SIZE #define LINE_SZ_4CIFS_NTSC 640 #define LINE_SZ_2CIFS_NTSC 640 #define LINE_SZ_1CIFS_NTSC 320 @@ -108,6 +109,9 @@ #define COLOR_YUVPL 1 /* YUV planar */ #define COLOR_YUVPK 2 /* YUV packed */ #define COLOR_Y8 4 /* monochrome */ +#define COLOR_JPG 5 /* JPEG */ +#define MASK_COLOR 0xff +#define MASK_JPG_QUALITY 0xff00 /* frame decimation. Not implemented by V4L yet(experimental in V4L) */ #define FDEC_1 1 /* capture every frame. default */ @@ -148,16 +152,14 @@ struct s2255_mode { u32 restart; /* if DSP requires restart */ }; -/* frame structure */ -#define FRAME_STATE_UNUSED 0 -#define FRAME_STATE_FILLING 1 -#define FRAME_STATE_FULL 2 +#define S2255_READ_IDLE 0 +#define S2255_READ_FRAME 1 +/* frame structure */ struct s2255_framei { unsigned long size; - - unsigned long ulState; /* ulState ==0 unused, 1 being filled, 2 full */ + unsigned long ulState; /* ulState:S2255_READ_IDLE, S2255_READ_FRAME*/ void *lpvbits; /* image data */ unsigned long cur_size; /* current data copied to it */ }; @@ -188,6 +190,10 @@ struct s2255_dmaqueue { #define S2255_FW_FAILED 3 #define S2255_FW_DISCONNECTING 4 +#define S2255_FW_MARKER 0x22552f2f +/* 2255 read states */ +#define S2255_READ_IDLE 0 +#define S2255_READ_FRAME 1 struct s2255_fw { int fw_loaded; int fw_size; @@ -195,7 +201,6 @@ struct s2255_fw { atomic_t fw_state; void *pfw_data; wait_queue_head_t wait_fw; - struct timer_list dsp_wait; const struct firmware *fw; }; @@ -242,10 +247,20 @@ struct s2255_dev { int last_frame[MAX_CHANNELS]; u32 cc; /* current channel */ int b_acquire[MAX_CHANNELS]; + /* allocated image size */ unsigned long req_image_size[MAX_CHANNELS]; + /* received packet size */ + unsigned long pkt_size[MAX_CHANNELS]; int bad_payload[MAX_CHANNELS]; unsigned long frame_count[MAX_CHANNELS]; int frame_ready; + /* if JPEG image */ + int jpg_size[MAX_CHANNELS]; + /* if channel configured to default state */ + int chn_configured[MAX_CHANNELS]; + wait_queue_head_t wait_setmode[MAX_CHANNELS]; + int setmode_ready[MAX_CHANNELS]; + int chn_ready; struct kref kref; spinlock_t slock; }; @@ -306,12 +321,16 @@ static void s2255_stop_readpipe(struct s2255_dev *dev); static int s2255_start_acquire(struct s2255_dev *dev, unsigned long chn); static int s2255_stop_acquire(struct s2255_dev *dev, unsigned long chn); static void s2255_fillbuff(struct s2255_dev *dev, struct s2255_buffer *buf, - int chn); + int chn, int jpgsize); static int s2255_set_mode(struct s2255_dev *dev, unsigned long chn, struct s2255_mode *mode); static int s2255_board_shutdown(struct s2255_dev *dev); static void s2255_exit_v4l(struct s2255_dev *dev); -static void s2255_fwload_start(struct s2255_dev *dev); +static void s2255_fwload_start(struct s2255_dev *dev, int reset); +static void s2255_destroy(struct kref *kref); +static long s2255_vendor_req(struct s2255_dev *dev, unsigned char req, + u16 index, u16 value, void *buf, + s32 buf_len, int bOut); #define dprintk(level, fmt, arg...) \ do { \ @@ -407,6 +426,10 @@ static const struct s2255_fmt formats[] = { .fourcc = V4L2_PIX_FMT_UYVY, .depth = 16 }, { + .name = "JPG", + .fourcc = V4L2_PIX_FMT_JPEG, + .depth = 24 + }, { .name = "8bpp GREY", .fourcc = V4L2_PIX_FMT_GREY, .depth = 8 @@ -464,6 +487,13 @@ static void planar422p_to_yuv_packed(const unsigned char *in, return; } +void s2255_reset_dsppower(struct s2255_dev *dev) +{ + s2255_vendor_req(dev, 0x40, 0x0b0b, 0x0b0b, NULL, 0, 1); + msleep(10); + s2255_vendor_req(dev, 0x50, 0x0000, 0x0000, NULL, 0, 1); + return; +} /* kickstarts the firmware loading. from probe */ @@ -480,18 +510,6 @@ static void s2255_timer(unsigned long user_data) } } -/* called when DSP is up and running. DSP is guaranteed to - be running after S2255_DSP_BOOTTIME */ -static void s2255_dsp_running(unsigned long user_data) -{ - struct s2255_fw *data = (struct s2255_fw *)user_data; - dprintk(1, "dsp running\n"); - atomic_set(&data->fw_state, S2255_FW_SUCCESS); - wake_up(&data->wait_fw); - printk(KERN_INFO "s2255: firmware loaded successfully\n"); - return; -} - /* this loads the firmware asynchronously. Originally this was done synchroously in probe. @@ -549,19 +567,14 @@ static void s2255_fwchunk_complete(struct urb *urb) } data->fw_loaded += len; } else { - init_timer(&data->dsp_wait); - data->dsp_wait.function = s2255_dsp_running; - data->dsp_wait.data = (unsigned long)data; atomic_set(&data->fw_state, S2255_FW_LOADED_DSPWAIT); - mod_timer(&data->dsp_wait, msecs_to_jiffies(S2255_DSP_BOOTTIME) - + jiffies); } dprintk(100, "2255 complete done\n"); return; } -static int s2255_got_frame(struct s2255_dev *dev, int chn) +static int s2255_got_frame(struct s2255_dev *dev, int chn, int jpgsize) { struct s2255_dmaqueue *dma_q = &dev->vidq[chn]; struct s2255_buffer *buf; @@ -586,8 +599,7 @@ static int s2255_got_frame(struct s2255_dev *dev, int chn) list_del(&buf->vb.queue); do_gettimeofday(&buf->vb.ts); dprintk(100, "[%p/%d] wakeup\n", buf, buf->vb.i); - - s2255_fillbuff(dev, buf, dma_q->channel); + s2255_fillbuff(dev, buf, dma_q->channel, jpgsize); wake_up(&buf->vb.done); dprintk(2, "wakeup [buf/i] [%p/%d]\n", buf, buf->vb.i); unlock: @@ -621,7 +633,7 @@ static const struct s2255_fmt *format_by_fourcc(int fourcc) * */ static void s2255_fillbuff(struct s2255_dev *dev, struct s2255_buffer *buf, - int chn) + int chn, int jpgsize) { int pos = 0; struct timeval ts; @@ -649,6 +661,10 @@ static void s2255_fillbuff(struct s2255_dev *dev, struct s2255_buffer *buf, case V4L2_PIX_FMT_GREY: memcpy(vbuf, tmpbuf, buf->vb.width * buf->vb.height); break; + case V4L2_PIX_FMT_JPEG: + buf->vb.size = jpgsize; + memcpy(vbuf, tmpbuf, buf->vb.size); + break; case V4L2_PIX_FMT_YUV422P: memcpy(vbuf, tmpbuf, buf->vb.width * buf->vb.height * 2); @@ -657,9 +673,6 @@ static void s2255_fillbuff(struct s2255_dev *dev, struct s2255_buffer *buf, printk(KERN_DEBUG "s2255: unknown format?\n"); } dev->last_frame[chn] = -1; - /* done with the frame, free it */ - frm->ulState = 0; - dprintk(4, "freeing buffer\n"); } else { printk(KERN_ERR "s2255: =======no frame\n"); return; @@ -1021,6 +1034,9 @@ static int vidioc_s_fmt_vid_cap(struct file *file, void *priv, case V4L2_PIX_FMT_GREY: fh->mode.color = COLOR_Y8; break; + case V4L2_PIX_FMT_JPEG: + fh->mode.color = COLOR_JPG | (50 << 8); + break; case V4L2_PIX_FMT_YUV422P: fh->mode.color = COLOR_YUVPL; break; @@ -1139,7 +1155,7 @@ static u32 get_transfer_size(struct s2255_mode *mode) } } outImageSize = linesPerFrame * pixelsPerLine; - if (mode->color != COLOR_Y8) { + if ((mode->color & MASK_COLOR) != COLOR_Y8) { /* 2 bytes/pixel if not monochrome */ outImageSize *= 2; } @@ -1185,6 +1201,7 @@ static int s2255_set_mode(struct s2255_dev *dev, unsigned long chn, u32 *buffer; unsigned long chn_rev; + mutex_lock(&dev->lock); chn_rev = G_chnmap[chn]; dprintk(3, "mode scale [%ld] %p %d\n", chn, mode, mode->scale); dprintk(3, "mode scale [%ld] %p %d\n", chn, &dev->mode[chn], @@ -1199,6 +1216,7 @@ static int s2255_set_mode(struct s2255_dev *dev, unsigned long chn, buffer = kzalloc(512, GFP_KERNEL); if (buffer == NULL) { dev_err(&dev->udev->dev, "out of mem\n"); + mutex_unlock(&dev->lock); return -ENOMEM; } @@ -1214,12 +1232,20 @@ static int s2255_set_mode(struct s2255_dev *dev, unsigned long chn, dprintk(1, "set mode done chn %lu, %d\n", chn, res); /* wait at least 3 frames before continuing */ - if (mode->restart) - msleep(125); + if (mode->restart) { + dev->setmode_ready[chn] = 0; + wait_event_timeout(dev->wait_setmode[chn], + (dev->setmode_ready[chn] != 0), + msecs_to_jiffies(S2255_SETMODE_TIMEOUT)); + if (dev->setmode_ready[chn] != 1) { + printk(KERN_DEBUG "s2255: no set mode response\n"); + res = -EFAULT; + } + } /* clear the restart flag */ dev->mode[chn].restart = 0; - + mutex_unlock(&dev->lock); return res; } @@ -1270,7 +1296,7 @@ static int vidioc_streamon(struct file *file, void *priv, enum v4l2_buf_type i) dev->cur_frame[chn] = 0; dev->frame_count[chn] = 0; for (j = 0; j < SYS_FRAMES; j++) { - dev->buffer[chn].frame[j].ulState = 0; + dev->buffer[chn].frame[j].ulState = S2255_READ_IDLE; dev->buffer[chn].frame[j].cur_size = 0; } res = videobuf_streamon(&fh->vb_vidq); @@ -1455,6 +1481,7 @@ static int s2255_open(struct inode *inode, struct file *file) enum v4l2_buf_type type = 0; int i = 0; int cur_channel = -1; + int state; dprintk(1, "s2255: open called (minor=%d)\n", minor); lock_kernel(); @@ -1471,47 +1498,77 @@ static int s2255_open(struct inode *inode, struct file *file) if ((NULL == dev) || (cur_channel == -1)) { unlock_kernel(); - dprintk(1, "s2255: openv4l no dev\n"); + printk(KERN_INFO "s2255: openv4l no dev\n"); return -ENODEV; } + if (atomic_read(&dev->fw_data->fw_state) == S2255_FW_DISCONNECTING) { + unlock_kernel(); + printk(KERN_INFO "disconnecting\n"); + return -ENODEV; + } + kref_get(&dev->kref); mutex_lock(&dev->open_lock); dev->users[cur_channel]++; dprintk(4, "s2255: open_handles %d\n", dev->users[cur_channel]); - if (atomic_read(&dev->fw_data->fw_state) == S2255_FW_FAILED) { + switch (atomic_read(&dev->fw_data->fw_state)) { + case S2255_FW_FAILED: err("2255 firmware load failed. retrying.\n"); - s2255_fwload_start(dev); + s2255_fwload_start(dev, 1); wait_event_timeout(dev->fw_data->wait_fw, - (atomic_read(&dev->fw_data->fw_state) - != S2255_FW_NOTLOADED), + ((atomic_read(&dev->fw_data->fw_state) + == S2255_FW_SUCCESS) || + (atomic_read(&dev->fw_data->fw_state) + == S2255_FW_DISCONNECTING)), msecs_to_jiffies(S2255_LOAD_TIMEOUT)); - if (atomic_read(&dev->fw_data->fw_state) - != S2255_FW_SUCCESS) { - printk(KERN_INFO "2255 FW load failed.\n"); - dev->users[cur_channel]--; - mutex_unlock(&dev->open_lock); - unlock_kernel(); - return -EFAULT; - } - } else if (atomic_read(&dev->fw_data->fw_state) == S2255_FW_NOTLOADED) { + break; + case S2255_FW_NOTLOADED: + case S2255_FW_LOADED_DSPWAIT: /* give S2255_LOAD_TIMEOUT time for firmware to load in case driver loaded and then device immediately opened */ printk(KERN_INFO "%s waiting for firmware load\n", __func__); wait_event_timeout(dev->fw_data->wait_fw, - (atomic_read(&dev->fw_data->fw_state) - != S2255_FW_NOTLOADED), - msecs_to_jiffies(S2255_LOAD_TIMEOUT)); - if (atomic_read(&dev->fw_data->fw_state) - != S2255_FW_SUCCESS) { - printk(KERN_INFO "2255 firmware not loaded" - "try again\n"); - dev->users[cur_channel]--; - mutex_unlock(&dev->open_lock); - unlock_kernel(); - return -EBUSY; + ((atomic_read(&dev->fw_data->fw_state) + == S2255_FW_SUCCESS) || + (atomic_read(&dev->fw_data->fw_state) + == S2255_FW_DISCONNECTING)), + msecs_to_jiffies(S2255_LOAD_TIMEOUT)); + break; + case S2255_FW_SUCCESS: + default: + break; + } + state = atomic_read(&dev->fw_data->fw_state); + if (state != S2255_FW_SUCCESS) { + int rc; + switch (state) { + case S2255_FW_FAILED: + printk(KERN_INFO "2255 FW load failed. %d\n", state); + rc = -ENODEV; + break; + case S2255_FW_DISCONNECTING: + printk(KERN_INFO "%s: disconnecting\n", __func__); + rc = -ENODEV; + break; + case S2255_FW_LOADED_DSPWAIT: + case S2255_FW_NOTLOADED: + printk(KERN_INFO "%s: firmware not loaded yet" + "please try again later\n", + __func__); + rc = -EAGAIN; + break; + default: + printk(KERN_INFO "%s: unknown state\n", __func__); + rc = -EFAULT; + break; } + dev->users[cur_channel]--; + mutex_unlock(&dev->open_lock); + kref_put(&dev->kref, s2255_destroy); + unlock_kernel(); + return rc; } /* allocate + initialize per filehandle data */ @@ -1519,6 +1576,7 @@ static int s2255_open(struct inode *inode, struct file *file) if (NULL == fh) { dev->users[cur_channel]--; mutex_unlock(&dev->open_lock); + kref_put(&dev->kref, s2255_destroy); unlock_kernel(); return -ENOMEM; } @@ -1533,6 +1591,13 @@ static int s2255_open(struct inode *inode, struct file *file) fh->height = NUM_LINES_4CIFS_NTSC * 2; fh->channel = cur_channel; + /* configure channel to default state */ + if (!dev->chn_configured[cur_channel]) { + s2255_set_mode(dev, cur_channel, &fh->mode); + dev->chn_configured[cur_channel] = 1; + } + + /* Put all controls at a sane state */ for (i = 0; i < ARRAY_SIZE(s2255_qctrl); i++) qctl_regs[i] = s2255_qctrl[i].default_value; @@ -1551,7 +1616,6 @@ static int s2255_open(struct inode *inode, struct file *file) V4L2_FIELD_INTERLACED, sizeof(struct s2255_buffer), fh); - kref_get(&dev->kref); mutex_unlock(&dev->open_lock); unlock_kernel(); return 0; @@ -1575,30 +1639,24 @@ static unsigned int s2255_poll(struct file *file, static void s2255_destroy(struct kref *kref) { struct s2255_dev *dev = to_s2255_dev(kref); + struct list_head *list; + int i; if (!dev) { printk(KERN_ERR "s2255drv: kref problem\n"); return; } - - /* - * Wake up any firmware load waiting (only done in .open, - * which holds the open_lock mutex) - */ atomic_set(&dev->fw_data->fw_state, S2255_FW_DISCONNECTING); wake_up(&dev->fw_data->wait_fw); - - /* prevent s2255_disconnect from racing s2255_open */ + for (i = 0; i < MAX_CHANNELS; i++) { + dev->setmode_ready[i] = 1; + wake_up(&dev->wait_setmode[i]); + } mutex_lock(&dev->open_lock); + /* reset the DSP so firmware can be reload next time */ + s2255_reset_dsppower(dev); s2255_exit_v4l(dev); - /* - * device unregistered so no longer possible to open. open_mutex - * can be unlocked and timers deleted afterwards. - */ - mutex_unlock(&dev->open_lock); - /* board shutdown stops the read pipe if it is running */ s2255_board_shutdown(dev); - /* make sure firmware still not trying to load */ del_timer(&dev->timer); /* only started in .probe and .open */ @@ -1608,23 +1666,19 @@ static void s2255_destroy(struct kref *kref) usb_free_urb(dev->fw_data->fw_urb); dev->fw_data->fw_urb = NULL; } - - /* - * delete the dsp_wait timer, which sets the firmware - * state on completion. This is done before fw_data - * is freed below. - */ - - del_timer(&dev->fw_data->dsp_wait); /* only started in .open */ - if (dev->fw_data->fw) release_firmware(dev->fw_data->fw); kfree(dev->fw_data->pfw_data); kfree(dev->fw_data); - usb_put_dev(dev->udev); dprintk(1, "%s", __func__); kfree(dev); + + while (!list_empty(&s2255_devlist)) { + list = s2255_devlist.next; + list_del(list); + } + mutex_unlock(&dev->open_lock); } static int s2255_close(struct inode *inode, struct file *file) @@ -1760,18 +1814,16 @@ static int s2255_probe_v4l(struct s2255_dev *dev) static void s2255_exit_v4l(struct s2255_dev *dev) { - struct list_head *list; + int i; - /* unregister the video devices */ - while (!list_empty(&s2255_devlist)) { - list = s2255_devlist.next; - list_del(list); - } for (i = 0; i < MAX_CHANNELS; i++) { - if (-1 != dev->vdev[i]->minor) + if (-1 != dev->vdev[i]->minor) { video_unregister_device(dev->vdev[i]); - else + printk(KERN_INFO "s2255 unregistered\n"); + } else { video_device_release(dev->vdev[i]); + printk(KERN_INFO "s2255 released\n"); + } } } @@ -1781,134 +1833,123 @@ static void s2255_exit_v4l(struct s2255_dev *dev) * function again). * * Received frame structure: - * bytes 0-3: marker : 0x2255DA4AL (FRAME_MARKER) + * bytes 0-3: marker : 0x2255DA4AL (S2255_MARKER_FRAME) * bytes 4-7: channel: 0-3 * bytes 8-11: payload size: size of the frame * bytes 12-payloadsize+12: frame data */ static int save_frame(struct s2255_dev *dev, struct s2255_pipeinfo *pipe_info) { - static int dbgsync; /* = 0; */ char *pdest; u32 offset = 0; - int bsync = 0; - int btrunc = 0; + int bframe = 0; char *psrc; unsigned long copy_size; unsigned long size; s32 idx = -1; struct s2255_framei *frm; unsigned char *pdata; - unsigned long cur_size; - int bsearch = 0; - struct s2255_bufferi *buf; + dprintk(100, "buffer to user\n"); idx = dev->cur_frame[dev->cc]; - buf = &dev->buffer[dev->cc]; - frm = &buf->frame[idx]; - - if (frm->ulState == 0) { - frm->ulState = 1; - frm->cur_size = 0; - bsearch = 1; - } else if (frm->ulState == 2) { - /* system frame was not freed */ - dprintk(2, "sys frame not free. overrun ringbuf\n"); - bsearch = 1; - frm->ulState = 1; - frm->cur_size = 0; - } - - if (bsearch) { - if (*(s32 *) pipe_info->transfer_buffer != FRAME_MARKER) { - u32 jj; - if (dbgsync == 0) { - dprintk(3, "not synched, discarding all packets" - "until marker\n"); + frm = &dev->buffer[dev->cc].frame[idx]; - dbgsync++; - } - pdata = (unsigned char *)pipe_info->transfer_buffer; - for (jj = 0; jj < (pipe_info->cur_transfer_size - 12); - jj++) { - if (*(s32 *) pdata == FRAME_MARKER) { - int cc; - dprintk(3, - "found frame marker at offset:" - " %d [%x %x]\n", jj, pdata[0], - pdata[1]); - offset = jj; - bsync = 1; - cc = *(u32 *) (pdata + sizeof(u32)); - if (cc >= MAX_CHANNELS) { - printk(KERN_ERR - "bad channel\n"); - return -EINVAL; - } - /* reverse it */ - dev->cc = G_chnmap[cc]; + if (frm->ulState == S2255_READ_IDLE) { + int jj; + unsigned int cc; + s32 *pdword; + int payload; + /* search for marker codes */ + pdata = (unsigned char *)pipe_info->transfer_buffer; + for (jj = 0; jj < (pipe_info->cur_transfer_size - 12); jj++) { + switch (*(s32 *) pdata) { + case S2255_MARKER_FRAME: + pdword = (s32 *)pdata; + dprintk(4, "found frame marker at offset:" + " %d [%x %x]\n", jj, pdata[0], + pdata[1]); + offset = jj + PREFIX_SIZE; + bframe = 1; + cc = pdword[1]; + if (cc >= MAX_CHANNELS) { + printk(KERN_ERR + "bad channel\n"); + return -EINVAL; + } + /* reverse it */ + dev->cc = G_chnmap[cc]; + payload = pdword[3]; + if (payload > dev->req_image_size[dev->cc]) { + dev->bad_payload[dev->cc]++; + /* discard the bad frame */ + return -EINVAL; + } + dev->pkt_size[dev->cc] = payload; + dev->jpg_size[dev->cc] = pdword[4]; + break; + case S2255_MARKER_RESPONSE: + pdword = (s32 *)pdata; + pdata += DEF_USB_BLOCK; + jj += DEF_USB_BLOCK; + if (pdword[1] >= MAX_CHANNELS) + break; + cc = G_chnmap[pdword[1]]; + if (!(cc >= 0 && cc < MAX_CHANNELS)) + break; + switch (pdword[2]) { + case 0x01: + /* check if channel valid */ + /* set mode ready */ + dev->setmode_ready[cc] = 1; + wake_up(&dev->wait_setmode[cc]); + dprintk(5, "setmode ready %d\n", cc); break; + case 0x10: + + dev->chn_ready |= (1 << cc); + if ((dev->chn_ready & 0x0f) != 0x0f) + break; + /* all channels ready */ + printk(KERN_INFO "s2255: fw loaded\n"); + atomic_set(&dev->fw_data->fw_state, + S2255_FW_SUCCESS); + wake_up(&dev->fw_data->wait_fw); + break; + default: + printk(KERN_INFO "s2255 unknwn resp\n"); } + default: pdata++; + break; } - if (bsync == 0) - return -EINVAL; - } else { - u32 *pword; - u32 payload; - int cc; - dbgsync = 0; - bsync = 1; - pword = (u32 *) pipe_info->transfer_buffer; - cc = pword[1]; - - if (cc >= MAX_CHANNELS) { - printk("invalid channel found. " - "throwing out data!\n"); - return -EINVAL; - } - dev->cc = G_chnmap[cc]; - payload = pword[2]; - if (payload != dev->req_image_size[dev->cc]) { - dprintk(1, "[%d][%d]unexpected payload: %d" - "required: %lu \n", cc, dev->cc, - payload, dev->req_image_size[dev->cc]); - dev->bad_payload[dev->cc]++; - /* discard the bad frame */ - return -EINVAL; - } - - } - } - /* search done. now find out if should be acquiring - on this channel */ - if (!dev->b_acquire[dev->cc]) { - frm->ulState = 0; - return -EINVAL; + if (bframe) + break; + } /* for */ + if (!bframe) + return -EINVAL; } + idx = dev->cur_frame[dev->cc]; frm = &dev->buffer[dev->cc].frame[idx]; - if (frm->ulState == 0) { - frm->ulState = 1; - frm->cur_size = 0; - } else if (frm->ulState == 2) { - /* system frame ring buffer overrun */ - dprintk(2, "sys frame overrun. overwriting frame %d %d\n", - dev->cc, idx); - frm->ulState = 1; - frm->cur_size = 0; + /* search done. now find out if should be acquiring on this channel */ + if (!dev->b_acquire[dev->cc]) { + /* we found a frame, but this channel is turned off */ + frm->ulState = S2255_READ_IDLE; + return -EINVAL; } - if (bsync) { - /* skip the marker 512 bytes (and offset if out of sync) */ - psrc = (u8 *)pipe_info->transfer_buffer + offset + PREFIX_SIZE; - } else { - psrc = (u8 *)pipe_info->transfer_buffer; + if (frm->ulState == S2255_READ_IDLE) { + frm->ulState = S2255_READ_FRAME; + frm->cur_size = 0; } + /* skip the marker 512 bytes (and offset if out of sync) */ + psrc = (u8 *)pipe_info->transfer_buffer + offset; + + if (frm->lpvbits == NULL) { dprintk(1, "s2255 frame buffer == NULL.%p %p %d %d", frm, dev, dev->cc, idx); @@ -1917,33 +1958,20 @@ static int save_frame(struct s2255_dev *dev, struct s2255_pipeinfo *pipe_info) pdest = frm->lpvbits + frm->cur_size; - if (bsync) { - copy_size = - (pipe_info->cur_transfer_size - offset) - PREFIX_SIZE; - if (copy_size > pipe_info->cur_transfer_size) { - printk("invalid copy size, overflow!\n"); - return -ENOMEM; - } - } else { - copy_size = pipe_info->cur_transfer_size; - } + copy_size = (pipe_info->cur_transfer_size - offset); - cur_size = frm->cur_size; - size = dev->req_image_size[dev->cc]; + size = dev->pkt_size[dev->cc] - PREFIX_SIZE; - if ((copy_size + cur_size) > size) { - copy_size = size - cur_size; - btrunc = 1; - } + /* sanity check on pdest */ + if ((copy_size + frm->cur_size) < dev->req_image_size[dev->cc]) + memcpy(pdest, psrc, copy_size); - memcpy(pdest, psrc, copy_size); - cur_size += copy_size; frm->cur_size += copy_size; - dprintk(50, "cur_size size %lu size %lu \n", cur_size, size); + dprintk(4, "cur_size size %lu size %lu \n", frm->cur_size, size); + + if (frm->cur_size >= size) { - if (cur_size >= (size - PREFIX_SIZE)) { u32 cc = dev->cc; - frm->ulState = 2; dprintk(2, "****************[%d]Buffer[%d]full*************\n", cc, idx); dev->last_frame[cc] = dev->cur_frame[cc]; @@ -1952,16 +1980,13 @@ static int save_frame(struct s2255_dev *dev, struct s2255_pipeinfo *pipe_info) if ((dev->cur_frame[cc] == SYS_FRAMES) || (dev->cur_frame[cc] == dev->buffer[cc].dwFrames)) dev->cur_frame[cc] = 0; - - /* signal the semaphore for this channel */ + /* frame ready */ if (dev->b_acquire[cc]) - s2255_got_frame(dev, cc); + s2255_got_frame(dev, cc, dev->jpg_size[cc]); dev->frame_count[cc]++; - } - /* frame was truncated */ - if (btrunc) { - /* return more data to process */ - return EAGAIN; + frm->ulState = S2255_READ_IDLE; + frm->cur_size = 0; + } /* done successfully */ return 0; @@ -1980,8 +2005,8 @@ static void s2255_read_video_callback(struct s2255_dev *dev, } /* otherwise copy to the system buffers */ res = save_frame(dev, pipe_info); - if (res == EAGAIN) - save_frame(dev, pipe_info); + if (res != 0) + dprintk(4, "s2255: read callback failed\n"); dprintk(50, "callback read video done\n"); return; @@ -2101,11 +2126,9 @@ static int s2255_board_init(struct s2255_dev *dev) memset(pipe, 0, sizeof(*pipe)); pipe->dev = dev; - pipe->cur_transfer_size = DEFAULT_PIPE_USBBLOCK; - pipe->max_transfer_size = MAX_PIPE_USBBLOCK; + pipe->cur_transfer_size = S2255_USB_XFER_SIZE; + pipe->max_transfer_size = S2255_USB_XFER_SIZE; - if (pipe->cur_transfer_size > pipe->max_transfer_size) - pipe->cur_transfer_size = pipe->max_transfer_size; pipe->transfer_buffer = kzalloc(pipe->max_transfer_size, GFP_KERNEL); if (pipe->transfer_buffer == NULL) { @@ -2329,7 +2352,7 @@ static int s2255_stop_acquire(struct s2255_dev *dev, unsigned long chn) kfree(buffer); dev->b_acquire[chn] = 0; - return 0; + return res; } static void s2255_stop_readpipe(struct s2255_dev *dev) @@ -2365,8 +2388,10 @@ static void s2255_stop_readpipe(struct s2255_dev *dev) return; } -static void s2255_fwload_start(struct s2255_dev *dev) +static void s2255_fwload_start(struct s2255_dev *dev, int reset) { + if (reset) + s2255_reset_dsppower(dev); dev->fw_data->fw_size = dev->fw_data->fw->size; atomic_set(&dev->fw_data->fw_state, S2255_FW_NOTLOADED); memcpy(dev->fw_data->pfw_data, @@ -2389,6 +2414,8 @@ static int s2255_probe(struct usb_interface *interface, struct usb_endpoint_descriptor *endpoint; int i; int retval = -ENOMEM; + __le32 *pdata; + int fw_size; dprintk(2, "s2255: probe\n"); @@ -2443,6 +2470,8 @@ static int s2255_probe(struct usb_interface *interface, dev->timer.data = (unsigned long)dev->fw_data; init_waitqueue_head(&dev->fw_data->wait_fw); + for (i = 0; i < MAX_CHANNELS; i++) + init_waitqueue_head(&dev->wait_setmode[i]); dev->fw_data->fw_urb = usb_alloc_urb(0, GFP_KERNEL); @@ -2462,16 +2491,30 @@ static int s2255_probe(struct usb_interface *interface, printk(KERN_ERR "sensoray 2255 failed to get firmware\n"); goto error; } + /* check the firmware is valid */ + fw_size = dev->fw_data->fw->size; + pdata = (__le32 *) &dev->fw_data->fw->data[fw_size - 8]; + if (*pdata != S2255_FW_MARKER) { + printk(KERN_INFO "Firmware invalid.\n"); + retval = -ENODEV; + goto error; + } else { + /* make sure firmware is the latest */ + __le32 *pRel; + pRel = (__le32 *) &dev->fw_data->fw->data[fw_size - 4]; + printk(KERN_INFO "s2255 dsp fw version %x\n", *pRel); + } /* loads v4l specific */ s2255_probe_v4l(dev); + usb_reset_device(dev->udev); /* load 2255 board specific */ s2255_board_init(dev); dprintk(4, "before probe done %p\n", dev); spin_lock_init(&dev->slock); - s2255_fwload_start(dev); + s2255_fwload_start(dev, 0); dev_info(&interface->dev, "Sensoray 2255 detected\n"); return 0; error: @@ -2482,14 +2525,30 @@ error: static void s2255_disconnect(struct usb_interface *interface) { struct s2255_dev *dev = NULL; + int i; dprintk(1, "s2255: disconnect interface %p\n", interface); dev = usb_get_intfdata(interface); + + /* + * wake up any of the timers to allow open_lock to be + * acquired sooner + */ + atomic_set(&dev->fw_data->fw_state, S2255_FW_DISCONNECTING); + wake_up(&dev->fw_data->wait_fw); + for (i = 0; i < MAX_CHANNELS; i++) { + dev->setmode_ready[i] = 1; + wake_up(&dev->wait_setmode[i]); + } + + mutex_lock(&dev->open_lock); + usb_set_intfdata(interface, NULL); + mutex_unlock(&dev->open_lock); + if (dev) { kref_put(&dev->kref, s2255_destroy); dprintk(1, "s2255drv: disconnect\n"); dev_info(&interface->dev, "s2255usb now disconnected\n"); } - usb_set_intfdata(interface, NULL); } static struct usb_driver s2255_driver = { -- cgit v0.10.2 From 9b0ae867a6fd3035e97e6c33bc07a5bfd7c0f96c Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Fri, 22 Aug 2008 17:25:10 -0300 Subject: V4L/DVB (8754): uvcvideo: Implement the USB power management reset_resume method. When a suspended device has been reset instead of being resumed, USB core calls the reset_resume method if available instead of unbinding and rebinding the device. This patch implements reset_resume by reusing the current resume implementation and simplifies the resume method by skipping the controls restore stage. Resuming from autosuspend should be faster. Signed-off-by: Laurent Pinchart Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/uvc/uvc_driver.c b/drivers/media/video/uvc/uvc_driver.c index 7e10203..4a2d099 100644 --- a/drivers/media/video/uvc/uvc_driver.c +++ b/drivers/media/video/uvc/uvc_driver.c @@ -1663,7 +1663,7 @@ static int uvc_suspend(struct usb_interface *intf, pm_message_t message) return uvc_video_suspend(&dev->video); } -static int uvc_resume(struct usb_interface *intf) +static int __uvc_resume(struct usb_interface *intf, int reset) { struct uvc_device *dev = usb_get_intfdata(intf); int ret; @@ -1672,7 +1672,7 @@ static int uvc_resume(struct usb_interface *intf) intf->cur_altsetting->desc.bInterfaceNumber); if (intf->cur_altsetting->desc.bInterfaceSubClass == SC_VIDEOCONTROL) { - if ((ret = uvc_ctrl_resume_device(dev)) < 0) + if (reset && (ret = uvc_ctrl_resume_device(dev)) < 0) return ret; return uvc_status_resume(dev); @@ -1687,6 +1687,16 @@ static int uvc_resume(struct usb_interface *intf) return uvc_video_resume(&dev->video); } +static int uvc_resume(struct usb_interface *intf) +{ + return __uvc_resume(intf, 0); +} + +static int uvc_reset_resume(struct usb_interface *intf) +{ + return __uvc_resume(intf, 1); +} + /* ------------------------------------------------------------------------ * Driver initialization and cleanup */ @@ -1952,6 +1962,7 @@ struct uvc_driver uvc_driver = { .disconnect = uvc_disconnect, .suspend = uvc_suspend, .resume = uvc_resume, + .reset_resume = uvc_reset_resume, .id_table = uvc_ids, .supports_autosuspend = 1, }, -- cgit v0.10.2 From a928880a5b65aa64bbbac880cdc65de85827ba20 Mon Sep 17 00:00:00 2001 From: Andy Walls Date: Fri, 22 Aug 2008 20:46:43 -0300 Subject: V4L/DVB (8770): cx18: get rid of ununsed buffers stolen field cx18: get rid of ununsed buffers stolen field. It's an unused holdover from ivtv. Signed-off-by: Andy Walls Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/cx18/cx18-driver.h b/drivers/media/video/cx18/cx18-driver.h index 4801bc7..db7483b 100644 --- a/drivers/media/video/cx18/cx18-driver.h +++ b/drivers/media/video/cx18/cx18-driver.h @@ -259,7 +259,6 @@ struct cx18_stream { /* Buffer Stats */ u32 buffers; u32 buf_size; - u32 buffers_stolen; /* Buffer Queues */ struct cx18_queue q_free; /* free buffers */ diff --git a/drivers/media/video/cx18/cx18-streams.c b/drivers/media/video/cx18/cx18-streams.c index 0da57f5..45dc6f3 100644 --- a/drivers/media/video/cx18/cx18-streams.c +++ b/drivers/media/video/cx18/cx18-streams.c @@ -432,7 +432,6 @@ int cx18_start_v4l2_encode_stream(struct cx18_stream *s) default: return -EINVAL; } - s->buffers_stolen = 0; /* mute/unmute video */ cx18_vapi(cx, CX18_CPU_SET_VIDEO_MUTE, 2, -- cgit v0.10.2 From 59ba2b002265f2e862aa7f0df3f13c09ea99c4da Mon Sep 17 00:00:00 2001 From: Andy Walls Date: Fri, 22 Aug 2008 20:55:54 -0300 Subject: V4L/DVB (8771): cx18: Remove redundant struct cx18_queue length member. cx18: Remove redundant struct cx18_queue length member. It can be trivially computed from queue->buffers * stream->buf_size, if ever really needed. Signed-off-by: Andy Walls Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/cx18/cx18-driver.h b/drivers/media/video/cx18/cx18-driver.h index db7483b..28c490b 100644 --- a/drivers/media/video/cx18/cx18-driver.h +++ b/drivers/media/video/cx18/cx18-driver.h @@ -217,7 +217,6 @@ struct cx18_buffer { struct cx18_queue { struct list_head list; u32 buffers; - u32 length; u32 bytesused; }; diff --git a/drivers/media/video/cx18/cx18-fileops.c b/drivers/media/video/cx18/cx18-fileops.c index 1e537fe..2fdbfb9 100644 --- a/drivers/media/video/cx18/cx18-fileops.c +++ b/drivers/media/video/cx18/cx18-fileops.c @@ -509,7 +509,7 @@ unsigned int cx18_v4l2_enc_poll(struct file *filp, poll_table *wait) CX18_DEBUG_HI_FILE("Encoder poll\n"); poll_wait(filp, &s->waitq, wait); - if (s->q_full.length || s->q_io.length) + if (s->q_full.buffers || s->q_io.buffers) return POLLIN | POLLRDNORM; if (eof) return POLLHUP; diff --git a/drivers/media/video/cx18/cx18-queue.c b/drivers/media/video/cx18/cx18-queue.c index dbe792a..4f3bd43 100644 --- a/drivers/media/video/cx18/cx18-queue.c +++ b/drivers/media/video/cx18/cx18-queue.c @@ -38,7 +38,6 @@ void cx18_queue_init(struct cx18_queue *q) { INIT_LIST_HEAD(&q->list); q->buffers = 0; - q->length = 0; q->bytesused = 0; } @@ -56,7 +55,6 @@ void cx18_enqueue(struct cx18_stream *s, struct cx18_buffer *buf, spin_lock_irqsave(&s->qlock, flags); list_add_tail(&buf->list, &q->list); q->buffers++; - q->length += s->buf_size; q->bytesused += buf->bytesused - buf->readpos; spin_unlock_irqrestore(&s->qlock, flags); } @@ -71,7 +69,6 @@ struct cx18_buffer *cx18_dequeue(struct cx18_stream *s, struct cx18_queue *q) buf = list_entry(q->list.next, struct cx18_buffer, list); list_del_init(q->list.next); q->buffers--; - q->length -= s->buf_size; q->bytesused -= buf->bytesused - buf->readpos; } spin_unlock_irqrestore(&s->qlock, flags); @@ -96,9 +93,7 @@ struct cx18_buffer *cx18_queue_get_buf_irq(struct cx18_stream *s, u32 id, they are not moved to the full queue */ if (s->type != CX18_ENC_STREAM_TYPE_TS) { s->q_free.buffers--; - s->q_free.length -= s->buf_size; s->q_full.buffers++; - s->q_full.length += s->buf_size; s->q_full.bytesused += buf->bytesused; list_move_tail(&buf->list, &s->q_full.list); } @@ -125,7 +120,6 @@ static void cx18_queue_flush(struct cx18_stream *s, struct cx18_queue *q) list_move_tail(q->list.next, &s->q_free.list); buf->bytesused = buf->readpos = buf->b_flags = 0; s->q_free.buffers++; - s->q_free.length += s->buf_size; } cx18_queue_init(q); spin_unlock_irqrestore(&s->qlock, flags); -- cgit v0.10.2 From b04bce476c57ac844962462ee4c813c44fa942cf Mon Sep 17 00:00:00 2001 From: Andy Walls Date: Fri, 22 Aug 2008 21:03:11 -0300 Subject: V4L/DVB (8772): cx18: Convert cx18_queue buffers member to atomic_t cx18: Convert cx18_queue buffers member to atomic_t. This allows safe concurrent access to check if a queue has data without having to acquire the queue spinlock. Signed-off-by: Andy Walls Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/cx18/cx18-driver.h b/drivers/media/video/cx18/cx18-driver.h index 28c490b..8812a5e 100644 --- a/drivers/media/video/cx18/cx18-driver.h +++ b/drivers/media/video/cx18/cx18-driver.h @@ -216,7 +216,7 @@ struct cx18_buffer { struct cx18_queue { struct list_head list; - u32 buffers; + atomic_t buffers; u32 bytesused; }; diff --git a/drivers/media/video/cx18/cx18-fileops.c b/drivers/media/video/cx18/cx18-fileops.c index 2fdbfb9..eb0144f 100644 --- a/drivers/media/video/cx18/cx18-fileops.c +++ b/drivers/media/video/cx18/cx18-fileops.c @@ -223,7 +223,7 @@ static struct cx18_buffer *cx18_get_buffer(struct cx18_stream *s, int non_block, prepare_to_wait(&s->waitq, &wait, TASK_INTERRUPTIBLE); /* New buffers might have become available before we were added to the waitqueue */ - if (!s->q_full.buffers) + if (!atomic_read(&s->q_full.buffers)) schedule(); finish_wait(&s->waitq, &wait); if (signal_pending(current)) { @@ -509,7 +509,7 @@ unsigned int cx18_v4l2_enc_poll(struct file *filp, poll_table *wait) CX18_DEBUG_HI_FILE("Encoder poll\n"); poll_wait(filp, &s->waitq, wait); - if (s->q_full.buffers || s->q_io.buffers) + if (atomic_read(&s->q_full.buffers) || atomic_read(&s->q_io.buffers)) return POLLIN | POLLRDNORM; if (eof) return POLLHUP; diff --git a/drivers/media/video/cx18/cx18-ioctl.c b/drivers/media/video/cx18/cx18-ioctl.c index a7f8396..5325c7a 100644 --- a/drivers/media/video/cx18/cx18-ioctl.c +++ b/drivers/media/video/cx18/cx18-ioctl.c @@ -731,7 +731,8 @@ static int cx18_log_status(struct file *file, void *fh) continue; CX18_INFO("Stream %s: status 0x%04lx, %d%% of %d KiB (%d buffers) in use\n", s->name, s->s_flags, - (s->buffers - s->q_free.buffers) * 100 / s->buffers, + (s->buffers - atomic_read(&s->q_free.buffers)) + * 100 / s->buffers, (s->buffers * s->buf_size) / 1024, s->buffers); } CX18_INFO("Read MPEG/VBI: %lld/%lld bytes\n", diff --git a/drivers/media/video/cx18/cx18-queue.c b/drivers/media/video/cx18/cx18-queue.c index 4f3bd43..a33ba04 100644 --- a/drivers/media/video/cx18/cx18-queue.c +++ b/drivers/media/video/cx18/cx18-queue.c @@ -37,7 +37,7 @@ void cx18_buf_swap(struct cx18_buffer *buf) void cx18_queue_init(struct cx18_queue *q) { INIT_LIST_HEAD(&q->list); - q->buffers = 0; + atomic_set(&q->buffers, 0); q->bytesused = 0; } @@ -54,7 +54,7 @@ void cx18_enqueue(struct cx18_stream *s, struct cx18_buffer *buf, } spin_lock_irqsave(&s->qlock, flags); list_add_tail(&buf->list, &q->list); - q->buffers++; + atomic_inc(&q->buffers); q->bytesused += buf->bytesused - buf->readpos; spin_unlock_irqrestore(&s->qlock, flags); } @@ -68,7 +68,7 @@ struct cx18_buffer *cx18_dequeue(struct cx18_stream *s, struct cx18_queue *q) if (!list_empty(&q->list)) { buf = list_entry(q->list.next, struct cx18_buffer, list); list_del_init(q->list.next); - q->buffers--; + atomic_dec(&q->buffers); q->bytesused -= buf->bytesused - buf->readpos; } spin_unlock_irqrestore(&s->qlock, flags); @@ -92,8 +92,8 @@ struct cx18_buffer *cx18_queue_get_buf_irq(struct cx18_stream *s, u32 id, /* the transport buffers are handled differently, they are not moved to the full queue */ if (s->type != CX18_ENC_STREAM_TYPE_TS) { - s->q_free.buffers--; - s->q_full.buffers++; + atomic_dec(&s->q_free.buffers); + atomic_inc(&s->q_full.buffers); s->q_full.bytesused += buf->bytesused; list_move_tail(&buf->list, &s->q_full.list); } @@ -119,7 +119,7 @@ static void cx18_queue_flush(struct cx18_stream *s, struct cx18_queue *q) buf = list_entry(q->list.next, struct cx18_buffer, list); list_move_tail(q->list.next, &s->q_free.list); buf->bytesused = buf->readpos = buf->b_flags = 0; - s->q_free.buffers++; + atomic_inc(&s->q_free.buffers); } cx18_queue_init(q); spin_unlock_irqrestore(&s->qlock, flags); -- cgit v0.10.2 From d3c5e7075508a6874d1a53d0a409b0bbbe3a9fbe Mon Sep 17 00:00:00 2001 From: Andy Walls Date: Sat, 23 Aug 2008 16:42:29 -0300 Subject: V4L/DVB (8773): cx18: Fix cx18_find_handle() and add error checking cx18: Fix cx18_find_handle() and add error checking. cx18_find_handle() did not find a good task handle and would use the invalid task handle under common conditions. Added a define for the invalid task handle and added error checking as well. Signed-off-by: Andy Walls Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/cx18/cx18-driver.h b/drivers/media/video/cx18/cx18-driver.h index 8812a5e..2635989 100644 --- a/drivers/media/video/cx18/cx18-driver.h +++ b/drivers/media/video/cx18/cx18-driver.h @@ -236,6 +236,8 @@ struct cx18_dvb { struct cx18; /* forward reference */ struct cx18_scb; /* forward reference */ +#define CX18_INVALID_TASK_HANDLE 0xffffffff + struct cx18_stream { /* These first four fields are always set, even if the stream is not actually created. */ diff --git a/drivers/media/video/cx18/cx18-fileops.c b/drivers/media/video/cx18/cx18-fileops.c index eb0144f..5f90899 100644 --- a/drivers/media/video/cx18/cx18-fileops.c +++ b/drivers/media/video/cx18/cx18-fileops.c @@ -132,6 +132,7 @@ static void cx18_dualwatch(struct cx18 *cx) u16 new_stereo_mode; const u16 stereo_mask = 0x0300; const u16 dual = 0x0200; + u32 h; new_stereo_mode = cx->params.audio_properties & stereo_mask; memset(&vt, 0, sizeof(vt)); @@ -143,13 +144,21 @@ static void cx18_dualwatch(struct cx18 *cx) if (new_stereo_mode == cx->dualwatch_stereo_mode) return; - new_bitmap = new_stereo_mode | (cx->params.audio_properties & ~stereo_mask); + new_bitmap = new_stereo_mode + | (cx->params.audio_properties & ~stereo_mask); - CX18_DEBUG_INFO("dualwatch: change stereo flag from 0x%x to 0x%x. new audio_bitmask=0x%ux\n", - cx->dualwatch_stereo_mode, new_stereo_mode, new_bitmap); + CX18_DEBUG_INFO("dualwatch: change stereo flag from 0x%x to 0x%x. " + "new audio_bitmask=0x%ux\n", + cx->dualwatch_stereo_mode, new_stereo_mode, new_bitmap); - if (cx18_vapi(cx, CX18_CPU_SET_AUDIO_PARAMETERS, 2, - cx18_find_handle(cx), new_bitmap) == 0) { + h = cx18_find_handle(cx); + if (h == CX18_INVALID_TASK_HANDLE) { + CX18_DEBUG_INFO("dualwatch: can't find valid task handle\n"); + return; + } + + if (cx18_vapi(cx, + CX18_CPU_SET_AUDIO_PARAMETERS, 2, h, new_bitmap) == 0) { cx->dualwatch_stereo_mode = new_stereo_mode; return; } @@ -695,20 +704,28 @@ int cx18_v4l2_open(struct inode *inode, struct file *filp) void cx18_mute(struct cx18 *cx) { - if (atomic_read(&cx->ana_capturing)) - cx18_vapi(cx, CX18_CPU_SET_AUDIO_MUTE, 2, - cx18_find_handle(cx), 1); + u32 h; + if (atomic_read(&cx->ana_capturing)) { + h = cx18_find_handle(cx); + if (h != CX18_INVALID_TASK_HANDLE) + cx18_vapi(cx, CX18_CPU_SET_AUDIO_MUTE, 2, h, 1); + else + CX18_ERR("Can't find valid task handle for mute\n"); + } CX18_DEBUG_INFO("Mute\n"); } void cx18_unmute(struct cx18 *cx) { + u32 h; if (atomic_read(&cx->ana_capturing)) { - cx18_msleep_timeout(100, 0); - cx18_vapi(cx, CX18_CPU_SET_MISC_PARAMETERS, 2, - cx18_find_handle(cx), 12); - cx18_vapi(cx, CX18_CPU_SET_AUDIO_MUTE, 2, - cx18_find_handle(cx), 0); + h = cx18_find_handle(cx); + if (h != CX18_INVALID_TASK_HANDLE) { + cx18_msleep_timeout(100, 0); + cx18_vapi(cx, CX18_CPU_SET_MISC_PARAMETERS, 2, h, 12); + cx18_vapi(cx, CX18_CPU_SET_AUDIO_MUTE, 2, h, 0); + } else + CX18_ERR("Can't find valid task handle for unmute\n"); } CX18_DEBUG_INFO("Unmute\n"); } diff --git a/drivers/media/video/cx18/cx18-ioctl.c b/drivers/media/video/cx18/cx18-ioctl.c index 5325c7a..84507a3 100644 --- a/drivers/media/video/cx18/cx18-ioctl.c +++ b/drivers/media/video/cx18/cx18-ioctl.c @@ -622,6 +622,7 @@ static int cx18_encoder_cmd(struct file *file, void *fh, { struct cx18_open_id *id = fh; struct cx18 *cx = id->cx; + u32 h; switch (enc->cmd) { case V4L2_ENC_CMD_START: @@ -643,8 +644,14 @@ static int cx18_encoder_cmd(struct file *file, void *fh, return -EPERM; if (test_and_set_bit(CX18_F_I_ENC_PAUSED, &cx->i_flags)) return 0; + h = cx18_find_handle(cx); + if (h == CX18_INVALID_TASK_HANDLE) { + CX18_ERR("Can't find valid task handle for " + "V4L2_ENC_CMD_PAUSE\n"); + return -EBADFD; + } cx18_mute(cx); - cx18_vapi(cx, CX18_CPU_CAPTURE_PAUSE, 1, cx18_find_handle(cx)); + cx18_vapi(cx, CX18_CPU_CAPTURE_PAUSE, 1, h); break; case V4L2_ENC_CMD_RESUME: @@ -654,7 +661,13 @@ static int cx18_encoder_cmd(struct file *file, void *fh, return -EPERM; if (!test_and_clear_bit(CX18_F_I_ENC_PAUSED, &cx->i_flags)) return 0; - cx18_vapi(cx, CX18_CPU_CAPTURE_RESUME, 1, cx18_find_handle(cx)); + h = cx18_find_handle(cx); + if (h == CX18_INVALID_TASK_HANDLE) { + CX18_ERR("Can't find valid task handle for " + "V4L2_ENC_CMD_RESUME\n"); + return -EBADFD; + } + cx18_vapi(cx, CX18_CPU_CAPTURE_RESUME, 1, h); cx18_unmute(cx); break; diff --git a/drivers/media/video/cx18/cx18-streams.c b/drivers/media/video/cx18/cx18-streams.c index 45dc6f3..53c5852 100644 --- a/drivers/media/video/cx18/cx18-streams.c +++ b/drivers/media/video/cx18/cx18-streams.c @@ -119,7 +119,7 @@ static void cx18_stream_init(struct cx18 *cx, int type) s->cx = cx; s->type = type; s->name = cx18_stream_info[type].name; - s->handle = 0xffffffff; + s->handle = CX18_INVALID_TASK_HANDLE; s->dma = cx18_stream_info[type].dma; s->buf_size = cx->stream_buf_size[type]; @@ -548,7 +548,7 @@ int cx18_stop_v4l2_encode_stream(struct cx18_stream *s, int gop_end) clear_bit(CX18_F_S_STREAMING, &s->s_flags); cx18_vapi(cx, CX18_DESTROY_TASK, 1, s->handle); - s->handle = 0xffffffff; + s->handle = CX18_INVALID_TASK_HANDLE; if (atomic_read(&cx->tot_capturing) > 0) return 0; @@ -567,8 +567,8 @@ u32 cx18_find_handle(struct cx18 *cx) for (i = 0; i < CX18_MAX_STREAMS; i++) { struct cx18_stream *s = &cx->streams[i]; - if (s->v4l2dev && s->handle) + if (s->v4l2dev && (s->handle != CX18_INVALID_TASK_HANDLE)) return s->handle; } - return 0; + return CX18_INVALID_TASK_HANDLE; } -- cgit v0.10.2 From 3b5df8ea40ac533c62b8e5f9f173d985665fc752 Mon Sep 17 00:00:00 2001 From: Andy Walls Date: Sat, 23 Aug 2008 18:36:50 -0300 Subject: V4L/DVB (8774): cx18: Have CX23418 release buffers at end of capture. cx18: Have CX23418 release buffers at end of capture. The CX23418 reuses task handles so we need to have it release the buffers associated with a task handle at the end of a capture. If we don't, buffer ids used for one type of stream in the driver (MPEG, TS, PCM), could be used for another type of stream by the CX23418, if a previously used handle is assigned to a different type of stream. The driver would drop valid buffers when this happened. Signed-off-by: Andy Walls Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/cx18/cx18-mailbox.c b/drivers/media/video/cx18/cx18-mailbox.c index 9317751..1b9fbf9 100644 --- a/drivers/media/video/cx18/cx18-mailbox.c +++ b/drivers/media/video/cx18/cx18-mailbox.c @@ -82,6 +82,7 @@ static const struct cx18_api_info api_info[] = { API_ENTRY(CPU, CX18_CPU_DE_SET_MDL_ACK, 0), API_ENTRY(CPU, CX18_CPU_DE_SET_MDL, API_FAST), API_ENTRY(CPU, CX18_APU_RESETAI, API_FAST), + API_ENTRY(CPU, CX18_CPU_DE_RELEASE_MDL, 0), API_ENTRY(0, 0, 0), }; diff --git a/drivers/media/video/cx18/cx18-streams.c b/drivers/media/video/cx18/cx18-streams.c index 53c5852..4d5b446 100644 --- a/drivers/media/video/cx18/cx18-streams.c +++ b/drivers/media/video/cx18/cx18-streams.c @@ -488,7 +488,14 @@ int cx18_start_v4l2_encode_stream(struct cx18_stream *s) /* begin_capture */ if (cx18_vapi(cx, CX18_CPU_CAPTURE_START, 1, s->handle)) { CX18_DEBUG_WARN("Error starting capture!\n"); + /* Ensure we're really not capturing before releasing MDLs */ + if (s->type == CX18_ENC_STREAM_TYPE_MPG) + cx18_vapi(cx, CX18_CPU_CAPTURE_STOP, 2, s->handle, 1); + else + cx18_vapi(cx, CX18_CPU_CAPTURE_STOP, 1, s->handle); + cx18_vapi(cx, CX18_CPU_DE_RELEASE_MDL, 1, s->handle); cx18_vapi(cx, CX18_DESTROY_TASK, 1, s->handle); + /* FIXME - clean-up DSP0_INT mask, i_flags, s_flags, etc. */ return -EINVAL; } @@ -540,6 +547,9 @@ int cx18_stop_v4l2_encode_stream(struct cx18_stream *s, int gop_end) CX18_INFO("ignoring gop_end: not (yet?) supported by the firmware\n"); } + /* Tell the CX23418 it can't use our buffers anymore */ + cx18_vapi(cx, CX18_CPU_DE_RELEASE_MDL, 1, s->handle); + if (s->type != CX18_ENC_STREAM_TYPE_TS) atomic_dec(&cx->ana_capturing); atomic_dec(&cx->tot_capturing); diff --git a/drivers/media/video/cx18/cx23418.h b/drivers/media/video/cx18/cx23418.h index e7ed053..668f968 100644 --- a/drivers/media/video/cx18/cx23418.h +++ b/drivers/media/video/cx18/cx23418.h @@ -351,7 +351,7 @@ Descriptor Lists to the driver IN[0] - Task handle. Handle of the task to start ReturnCode - One of the ERR_DE_... */ -/* #define CX18_CPU_DE_ReleaseMDL (CPU_CMD_MASK_DE | 0x0006) */ +#define CX18_CPU_DE_RELEASE_MDL (CPU_CMD_MASK_DE | 0x0006) /* Description: This command signals the cpu that the dat buffer has been consumed and ready for re-use. -- cgit v0.10.2 From 3ca685aae04960eaa8b2c97baf384996c20cf9ac Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Sat, 23 Aug 2008 04:49:13 -0300 Subject: V4L/DVB (8776): radio: replace video_exclusive_open/release Move the video_exclusive_open/release functionality into the driver itself. Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/radio/radio-aimslab.c b/drivers/media/radio/radio-aimslab.c index 1f064f4..b657c7b 100644 --- a/drivers/media/radio/radio-aimslab.c +++ b/drivers/media/radio/radio-aimslab.c @@ -51,6 +51,7 @@ static struct mutex lock; struct rt_device { + unsigned long in_use; int port; int curvol; unsigned long curfreq; @@ -378,10 +379,21 @@ static int vidioc_s_audio(struct file *file, void *priv, static struct rt_device rtrack_unit; +static int rtrack_exclusive_open(struct inode *inode, struct file *file) +{ + return test_and_set_bit(0, &rtrack_unit.in_use) ? -EBUSY : 0; +} + +static int rtrack_exclusive_release(struct inode *inode, struct file *file) +{ + clear_bit(0, &rtrack_unit.in_use); + return 0; +} + static const struct file_operations rtrack_fops = { .owner = THIS_MODULE, - .open = video_exclusive_open, - .release = video_exclusive_release, + .open = rtrack_exclusive_open, + .release = rtrack_exclusive_release, .ioctl = video_ioctl2, #ifdef CONFIG_COMPAT .compat_ioctl = v4l_compat_ioctl32, diff --git a/drivers/media/radio/radio-aztech.c b/drivers/media/radio/radio-aztech.c index 628c689..ae18a7c 100644 --- a/drivers/media/radio/radio-aztech.c +++ b/drivers/media/radio/radio-aztech.c @@ -70,6 +70,7 @@ static struct mutex lock; struct az_device { + unsigned long in_use; int curvol; unsigned long curfreq; int stereo; @@ -342,10 +343,21 @@ static int vidioc_s_ctrl (struct file *file, void *priv, static struct az_device aztech_unit; +static int aztech_exclusive_open(struct inode *inode, struct file *file) +{ + return test_and_set_bit(0, &aztech_unit.in_use) ? -EBUSY : 0; +} + +static int aztech_exclusive_release(struct inode *inode, struct file *file) +{ + clear_bit(0, &aztech_unit.in_use); + return 0; +} + static const struct file_operations aztech_fops = { .owner = THIS_MODULE, - .open = video_exclusive_open, - .release = video_exclusive_release, + .open = aztech_exclusive_open, + .release = aztech_exclusive_release, .ioctl = video_ioctl2, #ifdef CONFIG_COMPAT .compat_ioctl = v4l_compat_ioctl32, diff --git a/drivers/media/radio/radio-gemtek-pci.c b/drivers/media/radio/radio-gemtek-pci.c index 5cd7f03..a7b9a5d 100644 --- a/drivers/media/radio/radio-gemtek-pci.c +++ b/drivers/media/radio/radio-gemtek-pci.c @@ -100,9 +100,8 @@ struct gemtek_pci_card { u8 mute; }; -static const char rcsid[] = "$Id: radio-gemtek-pci.c,v 1.1 2001/07/23 08:08:16 ted Exp ted $"; - static int nr_radio = -1; +static unsigned long in_use; static inline u8 gemtek_pci_out( u16 value, u32 port ) { @@ -364,10 +363,21 @@ MODULE_DEVICE_TABLE( pci, gemtek_pci_id ); static int mx = 1; +static int gemtek_pci_exclusive_open(struct inode *inode, struct file *file) +{ + return test_and_set_bit(0, &in_use) ? -EBUSY : 0; +} + +static int gemtek_pci_exclusive_release(struct inode *inode, struct file *file) +{ + clear_bit(0, &in_use); + return 0; +} + static const struct file_operations gemtek_pci_fops = { .owner = THIS_MODULE, - .open = video_exclusive_open, - .release = video_exclusive_release, + .open = gemtek_pci_exclusive_open, + .release = gemtek_pci_exclusive_release, .ioctl = video_ioctl2, #ifdef CONFIG_COMPAT .compat_ioctl = v4l_compat_ioctl32, diff --git a/drivers/media/radio/radio-gemtek.c b/drivers/media/radio/radio-gemtek.c index 0a0f956..cc90329 100644 --- a/drivers/media/radio/radio-gemtek.c +++ b/drivers/media/radio/radio-gemtek.c @@ -57,6 +57,7 @@ static int shutdown = 1; static int keepmuted = 1; static int initmute = 1; static int radio_nr = -1; +static unsigned long in_use; module_param(io, int, 0444); MODULE_PARM_DESC(io, "Force I/O port for the GemTek Radio card if automatic " @@ -393,10 +394,21 @@ static struct v4l2_queryctrl radio_qctrl[] = { } }; +static int gemtek_exclusive_open(struct inode *inode, struct file *file) +{ + return test_and_set_bit(0, &in_use) ? -EBUSY : 0; +} + +static int gemtek_exclusive_release(struct inode *inode, struct file *file) +{ + clear_bit(0, &in_use); + return 0; +} + static const struct file_operations gemtek_fops = { .owner = THIS_MODULE, - .open = video_exclusive_open, - .release = video_exclusive_release, + .open = gemtek_exclusive_open, + .release = gemtek_exclusive_release, .ioctl = video_ioctl2, #ifdef CONFIG_COMPAT .compat_ioctl = v4l_compat_ioctl32, diff --git a/drivers/media/radio/radio-maestro.c b/drivers/media/radio/radio-maestro.c index 9ef0a76..03c2094 100644 --- a/drivers/media/radio/radio-maestro.c +++ b/drivers/media/radio/radio-maestro.c @@ -75,7 +75,21 @@ static struct v4l2_queryctrl radio_qctrl[] = { static int radio_nr = -1; module_param(radio_nr, int, 0); +static unsigned long in_use; + static int maestro_probe(struct pci_dev *pdev, const struct pci_device_id *ent); + +static int maestro_exclusive_open(struct inode *inode, struct file *file) +{ + return test_and_set_bit(0, &in_use) ? -EBUSY : 0; +} + +static int maestro_exclusive_release(struct inode *inode, struct file *file) +{ + clear_bit(0, &in_use); + return 0; +} + static void maestro_remove(struct pci_dev *pdev); static struct pci_device_id maestro_r_pci_tbl[] = { @@ -98,8 +112,8 @@ static struct pci_driver maestro_r_driver = { static const struct file_operations maestro_fops = { .owner = THIS_MODULE, - .open = video_exclusive_open, - .release = video_exclusive_release, + .open = maestro_exclusive_open, + .release = maestro_exclusive_release, .ioctl = video_ioctl2, #ifdef CONFIG_COMPAT .compat_ioctl = v4l_compat_ioctl32, diff --git a/drivers/media/radio/radio-maxiradio.c b/drivers/media/radio/radio-maxiradio.c index 0cc6fcb..263ef8b 100644 --- a/drivers/media/radio/radio-maxiradio.c +++ b/drivers/media/radio/radio-maxiradio.c @@ -85,6 +85,7 @@ static const int clk = 1, data = 2, wren = 4, mo_st = 8, power = 16 ; static int radio_nr = -1; module_param(radio_nr, int, 0); +static unsigned long in_use; #define FREQ_LO 50*16000 #define FREQ_HI 150*16000 @@ -99,10 +100,21 @@ module_param(radio_nr, int, 0); #define BITS2FREQ(x) ((x) * FREQ_STEP - FREQ_IF) +static int maxiradio_exclusive_open(struct inode *inode, struct file *file) +{ + return test_and_set_bit(0, &in_use) ? -EBUSY : 0; +} + +static int maxiradio_exclusive_release(struct inode *inode, struct file *file) +{ + clear_bit(0, &in_use); + return 0; +} + static const struct file_operations maxiradio_fops = { .owner = THIS_MODULE, - .open = video_exclusive_open, - .release = video_exclusive_release, + .open = maxiradio_exclusive_open, + .release = maxiradio_exclusive_release, .ioctl = video_ioctl2, #ifdef CONFIG_COMPAT .compat_ioctl = v4l_compat_ioctl32, diff --git a/drivers/media/radio/radio-rtrack2.c b/drivers/media/radio/radio-rtrack2.c index 6d820e2..5b93b47 100644 --- a/drivers/media/radio/radio-rtrack2.c +++ b/drivers/media/radio/radio-rtrack2.c @@ -52,6 +52,7 @@ static spinlock_t lock; struct rt_device { + unsigned long in_use; int port; unsigned long curfreq; int muted; @@ -284,10 +285,21 @@ static int vidioc_s_audio(struct file *file, void *priv, static struct rt_device rtrack2_unit; +static int rtrack2_exclusive_open(struct inode *inode, struct file *file) +{ + return test_and_set_bit(0, &rtrack2_unit.in_use) ? -EBUSY : 0; +} + +static int rtrack2_exclusive_release(struct inode *inode, struct file *file) +{ + clear_bit(0, &rtrack2_unit.in_use); + return 0; +} + static const struct file_operations rtrack2_fops = { .owner = THIS_MODULE, - .open = video_exclusive_open, - .release = video_exclusive_release, + .open = rtrack2_exclusive_open, + .release = rtrack2_exclusive_release, .ioctl = video_ioctl2, #ifdef CONFIG_COMPAT .compat_ioctl = v4l_compat_ioctl32, diff --git a/drivers/media/radio/radio-sf16fmi.c b/drivers/media/radio/radio-sf16fmi.c index 0d478f5..55f8334 100644 --- a/drivers/media/radio/radio-sf16fmi.c +++ b/drivers/media/radio/radio-sf16fmi.c @@ -45,6 +45,7 @@ static struct v4l2_queryctrl radio_qctrl[] = { struct fmi_device { + unsigned long in_use; int port; int curvol; /* 1 or 0 */ unsigned long curfreq; /* freq in kHz */ @@ -284,10 +285,21 @@ static int vidioc_s_audio(struct file *file, void *priv, static struct fmi_device fmi_unit; +static int fmi_exclusive_open(struct inode *inode, struct file *file) +{ + return test_and_set_bit(0, &fmi_unit.in_use) ? -EBUSY : 0; +} + +static int fmi_exclusive_release(struct inode *inode, struct file *file) +{ + clear_bit(0, &fmi_unit.in_use); + return 0; +} + static const struct file_operations fmi_fops = { .owner = THIS_MODULE, - .open = video_exclusive_open, - .release = video_exclusive_release, + .open = fmi_exclusive_open, + .release = fmi_exclusive_release, .ioctl = video_ioctl2, #ifdef CONFIG_COMPAT .compat_ioctl = v4l_compat_ioctl32, diff --git a/drivers/media/radio/radio-sf16fmr2.c b/drivers/media/radio/radio-sf16fmr2.c index 6290553..14153ed 100644 --- a/drivers/media/radio/radio-sf16fmr2.c +++ b/drivers/media/radio/radio-sf16fmr2.c @@ -64,6 +64,7 @@ static struct v4l2_queryctrl radio_qctrl[] = { /* this should be static vars for module size */ struct fmr2_device { + unsigned long in_use; int port; int curvol; /* 0-15 */ int mute; @@ -400,10 +401,21 @@ static int vidioc_s_audio(struct file *file, void *priv, static struct fmr2_device fmr2_unit; +static int fmr2_exclusive_open(struct inode *inode, struct file *file) +{ + return test_and_set_bit(0, &fmr2_unit.in_use) ? -EBUSY : 0; +} + +static int fmr2_exclusive_release(struct inode *inode, struct file *file) +{ + clear_bit(0, &fmr2_unit.in_use); + return 0; +} + static const struct file_operations fmr2_fops = { .owner = THIS_MODULE, - .open = video_exclusive_open, - .release = video_exclusive_release, + .open = fmr2_exclusive_open, + .release = fmr2_exclusive_release, .ioctl = video_ioctl2, #ifdef CONFIG_COMPAT .compat_ioctl = v4l_compat_ioctl32, diff --git a/drivers/media/radio/radio-terratec.c b/drivers/media/radio/radio-terratec.c index 0876fec..eed1497 100644 --- a/drivers/media/radio/radio-terratec.c +++ b/drivers/media/radio/radio-terratec.c @@ -79,6 +79,7 @@ static spinlock_t lock; struct tt_device { + unsigned long in_use; int port; int curvol; unsigned long curfreq; @@ -356,10 +357,21 @@ static int vidioc_s_audio(struct file *file, void *priv, static struct tt_device terratec_unit; +static int terratec_exclusive_open(struct inode *inode, struct file *file) +{ + return test_and_set_bit(0, &terratec_unit.in_use) ? -EBUSY : 0; +} + +static int terratec_exclusive_release(struct inode *inode, struct file *file) +{ + clear_bit(0, &terratec_unit.in_use); + return 0; +} + static const struct file_operations terratec_fops = { .owner = THIS_MODULE, - .open = video_exclusive_open, - .release = video_exclusive_release, + .open = terratec_exclusive_open, + .release = terratec_exclusive_release, .ioctl = video_ioctl2, #ifdef CONFIG_COMPAT .compat_ioctl = v4l_compat_ioctl32, diff --git a/drivers/media/radio/radio-trust.c b/drivers/media/radio/radio-trust.c index 1931619..dd0c425 100644 --- a/drivers/media/radio/radio-trust.c +++ b/drivers/media/radio/radio-trust.c @@ -78,6 +78,7 @@ static __u16 curtreble; static unsigned long curfreq; static int curstereo; static int curmute; +static unsigned long in_use; /* i2c addresses */ #define TDA7318_ADDR 0x88 @@ -336,10 +337,21 @@ static int vidioc_s_audio(struct file *file, void *priv, return 0; } +static int trust_exclusive_open(struct inode *inode, struct file *file) +{ + return test_and_set_bit(0, &in_use) ? -EBUSY : 0; +} + +static int trust_exclusive_release(struct inode *inode, struct file *file) +{ + clear_bit(0, &in_use); + return 0; +} + static const struct file_operations trust_fops = { .owner = THIS_MODULE, - .open = video_exclusive_open, - .release = video_exclusive_release, + .open = trust_exclusive_open, + .release = trust_exclusive_release, .ioctl = video_ioctl2, #ifdef CONFIG_COMPAT .compat_ioctl = v4l_compat_ioctl32, diff --git a/drivers/media/radio/radio-typhoon.c b/drivers/media/radio/radio-typhoon.c index f8d62cf..8784685 100644 --- a/drivers/media/radio/radio-typhoon.c +++ b/drivers/media/radio/radio-typhoon.c @@ -79,7 +79,7 @@ static struct v4l2_queryctrl radio_qctrl[] = { #endif struct typhoon_device { - int users; + unsigned long in_use; int iobase; int curvol; int muted; @@ -334,10 +334,21 @@ static struct typhoon_device typhoon_unit = .mutefreq = CONFIG_RADIO_TYPHOON_MUTEFREQ, }; +static int typhoon_exclusive_open(struct inode *inode, struct file *file) +{ + return test_and_set_bit(0, &typhoon_unit.in_use) ? -EBUSY : 0; +} + +static int typhoon_exclusive_release(struct inode *inode, struct file *file) +{ + clear_bit(0, &typhoon_unit.in_use); + return 0; +} + static const struct file_operations typhoon_fops = { .owner = THIS_MODULE, - .open = video_exclusive_open, - .release = video_exclusive_release, + .open = typhoon_exclusive_open, + .release = typhoon_exclusive_release, .ioctl = video_ioctl2, #ifdef CONFIG_COMPAT .compat_ioctl = v4l_compat_ioctl32, @@ -447,8 +458,7 @@ static int __init typhoon_init(void) } typhoon_radio.priv = &typhoon_unit; - if (video_register_device(&typhoon_radio, VFL_TYPE_RADIO, radio_nr) == -1) - { + if (video_register_device(&typhoon_radio, VFL_TYPE_RADIO, radio_nr) < 0) { release_region(io, 8); return -EINVAL; } diff --git a/drivers/media/radio/radio-zoltrix.c b/drivers/media/radio/radio-zoltrix.c index 51d57ed..4d76e71 100644 --- a/drivers/media/radio/radio-zoltrix.c +++ b/drivers/media/radio/radio-zoltrix.c @@ -69,6 +69,7 @@ static int io = CONFIG_RADIO_ZOLTRIX_PORT; static int radio_nr = -1; struct zol_device { + unsigned long in_use; int port; int curvol; unsigned long curfreq; @@ -396,11 +397,22 @@ static int vidioc_s_audio(struct file *file, void *priv, static struct zol_device zoltrix_unit; +static int zoltrix_exclusive_open(struct inode *inode, struct file *file) +{ + return test_and_set_bit(0, &zoltrix_unit.in_use) ? -EBUSY : 0; +} + +static int zoltrix_exclusive_release(struct inode *inode, struct file *file) +{ + clear_bit(0, &zoltrix_unit.in_use); + return 0; +} + static const struct file_operations zoltrix_fops = { .owner = THIS_MODULE, - .open = video_exclusive_open, - .release = video_exclusive_release, + .open = zoltrix_exclusive_open, + .release = zoltrix_exclusive_release, .ioctl = video_ioctl2, #ifdef CONFIG_COMPAT .compat_ioctl = v4l_compat_ioctl32, -- cgit v0.10.2 From 2f3d00250ae5b1d2727e2723da805290ec408503 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Sat, 23 Aug 2008 04:52:00 -0300 Subject: V4L/DVB (8777): tea575x-tuner: replace video_exclusive_open/release Move the video_exclusive_open/release functionality into the driver itself. Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab diff --git a/include/sound/tea575x-tuner.h b/include/sound/tea575x-tuner.h index b62ce3e..b6870cb 100644 --- a/include/sound/tea575x-tuner.h +++ b/include/sound/tea575x-tuner.h @@ -43,6 +43,7 @@ struct snd_tea575x { unsigned int freq_fixup; /* crystal onboard */ unsigned int val; /* hw value */ unsigned long freq; /* frequency */ + unsigned long in_use; /* set if the device is in use */ struct snd_tea575x_ops *ops; void *private_data; }; diff --git a/sound/i2c/other/tea575x-tuner.c b/sound/i2c/other/tea575x-tuner.c index 83e9005..621d7fe 100644 --- a/sound/i2c/other/tea575x-tuner.c +++ b/sound/i2c/other/tea575x-tuner.c @@ -175,6 +175,23 @@ static void snd_tea575x_release(struct video_device *vfd) { } +static int snd_tea575x_exclusive_open(struct inode *inode, struct file *file) +{ + struct video_device *dev = video_devdata(file); + struct snd_tea575x *tea = video_get_drvdata(dev); + + return test_and_set_bit(0, &tea->in_use) ? -EBUSY : 0; +} + +static int snd_tea575x_exclusive_release(struct inode *inode, struct file *file) +{ + struct video_device *dev = video_devdata(file); + struct snd_tea575x *tea = video_get_drvdata(dev); + + clear_bit(0, &tea->in_use); + return 0; +} + /* * initialize all the tea575x chips */ @@ -193,9 +210,10 @@ void snd_tea575x_init(struct snd_tea575x *tea) tea->vd.release = snd_tea575x_release; video_set_drvdata(&tea->vd, tea); tea->vd.fops = &tea->fops; + tea->in_use = 0; tea->fops.owner = tea->card->module; - tea->fops.open = video_exclusive_open; - tea->fops.release = video_exclusive_release; + tea->fops.open = snd_tea575x_exclusive_open; + tea->fops.release = snd_tea575x_exclusive_release; tea->fops.ioctl = snd_tea575x_ioctl; if (video_register_device(&tea->vd, VFL_TYPE_RADIO, tea->dev_nr - 1) < 0) { snd_printk(KERN_ERR "unable to register tea575x tuner\n"); -- cgit v0.10.2 From 7d43cd53c851e3cf04d73108d4e7e25a1104c6f5 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Sat, 23 Aug 2008 05:31:47 -0300 Subject: V4L/DVB (8780): v4l: replace the last uses of video_exclusive_open/release Handle the video_exclusive_open/release functionality inside the driver. Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/arv.c b/drivers/media/video/arv.c index 9e436ad..0d4f9b6 100644 --- a/drivers/media/video/arv.c +++ b/drivers/media/video/arv.c @@ -116,6 +116,7 @@ struct ar_device { int width, height; int frame_bytes, line_bytes; wait_queue_head_t wait; + unsigned long in_use; struct mutex lock; }; @@ -742,10 +743,23 @@ void ar_release(struct video_device *vfd) * Video4Linux Module functions * ****************************************************************************/ +static struct ar_device ardev; + +static int ar_exclusive_open(struct inode *inode, struct file *file) +{ + return test_and_set_bit(0, &ardev.in_use) ? -EBUSY : 0; +} + +static int ar_exclusive_release(struct inode *inode, struct file *file) +{ + clear_bit(0, &ardev.in_use); + return 0; +} + static const struct file_operations ar_fops = { .owner = THIS_MODULE, - .open = video_exclusive_open, - .release = video_exclusive_release, + .open = ar_exclusive_open, + .release = ar_exclusive_release, .read = ar_read, .ioctl = ar_ioctl, #ifdef CONFIG_COMPAT @@ -762,7 +776,6 @@ static struct video_device ar_template = { }; #define ALIGN4(x) ((((int)(x)) & 0x3) == 0) -static struct ar_device ardev; static int __init ar_init(void) { diff --git a/drivers/media/video/bw-qcam.c b/drivers/media/video/bw-qcam.c index 01f0770..e8e1bb1 100644 --- a/drivers/media/video/bw-qcam.c +++ b/drivers/media/video/bw-qcam.c @@ -894,10 +894,27 @@ static ssize_t qcam_read(struct file *file, char __user *buf, return len; } +static int qcam_exclusive_open(struct inode *inode, struct file *file) +{ + struct video_device *dev = video_devdata(file); + struct qcam_device *qcam = (struct qcam_device *)dev; + + return test_and_set_bit(0, &qcam->in_use) ? -EBUSY : 0; +} + +static int qcam_exclusive_release(struct inode *inode, struct file *file) +{ + struct video_device *dev = video_devdata(file); + struct qcam_device *qcam = (struct qcam_device *)dev; + + clear_bit(0, &qcam->in_use); + return 0; +} + static const struct file_operations qcam_fops = { .owner = THIS_MODULE, - .open = video_exclusive_open, - .release = video_exclusive_release, + .open = qcam_exclusive_open, + .release = qcam_exclusive_release, .ioctl = qcam_ioctl, #ifdef CONFIG_COMPAT .compat_ioctl = v4l_compat_ioctl32, diff --git a/drivers/media/video/bw-qcam.h b/drivers/media/video/bw-qcam.h index 6701daf..8a60c5d 100644 --- a/drivers/media/video/bw-qcam.h +++ b/drivers/media/video/bw-qcam.h @@ -65,4 +65,5 @@ struct qcam_device { int top, left; int status; unsigned int saved_bits; + unsigned long in_use; }; diff --git a/drivers/media/video/c-qcam.c b/drivers/media/video/c-qcam.c index 7f6c6b4..2196c1d 100644 --- a/drivers/media/video/c-qcam.c +++ b/drivers/media/video/c-qcam.c @@ -51,6 +51,7 @@ struct qcam_device { int contrast, brightness, whitebal; int top, left; unsigned int bidirectional; + unsigned long in_use; struct mutex lock; }; @@ -687,11 +688,28 @@ static ssize_t qcam_read(struct file *file, char __user *buf, return len; } +static int qcam_exclusive_open(struct inode *inode, struct file *file) +{ + struct video_device *dev = video_devdata(file); + struct qcam_device *qcam = (struct qcam_device *)dev; + + return test_and_set_bit(0, &qcam->in_use) ? -EBUSY : 0; +} + +static int qcam_exclusive_release(struct inode *inode, struct file *file) +{ + struct video_device *dev = video_devdata(file); + struct qcam_device *qcam = (struct qcam_device *)dev; + + clear_bit(0, &qcam->in_use); + return 0; +} + /* video device template */ static const struct file_operations qcam_fops = { .owner = THIS_MODULE, - .open = video_exclusive_open, - .release = video_exclusive_release, + .open = qcam_exclusive_open, + .release = qcam_exclusive_release, .ioctl = qcam_ioctl, #ifdef CONFIG_COMPAT .compat_ioctl = v4l_compat_ioctl32, diff --git a/drivers/media/video/meye.c b/drivers/media/video/meye.c index 102a5b9..6418f4a 100644 --- a/drivers/media/video/meye.c +++ b/drivers/media/video/meye.c @@ -843,21 +843,16 @@ again: static int meye_open(struct inode *inode, struct file *file) { - int i, err; + int i; - lock_kernel(); - err = video_exclusive_open(inode, file); - if (err < 0) { - unlock_kernel(); - return err; - } + if (test_and_set_bit(0, &meye.in_use)) + return -EBUSY; mchip_hic_stop(); if (mchip_dma_alloc()) { printk(KERN_ERR "meye: mchip framebuffer allocation failed\n"); - video_exclusive_release(inode, file); - unlock_kernel(); + clear_bit(0, &meye.in_use); return -ENOBUFS; } @@ -865,7 +860,6 @@ static int meye_open(struct inode *inode, struct file *file) meye.grab_buffer[i].state = MEYE_BUF_UNUSED; kfifo_reset(meye.grabq); kfifo_reset(meye.doneq); - unlock_kernel(); return 0; } @@ -873,7 +867,7 @@ static int meye_release(struct inode *inode, struct file *file) { mchip_hic_stop(); mchip_dma_free(); - video_exclusive_release(inode, file); + clear_bit(0, &meye.in_use); return 0; } diff --git a/drivers/media/video/meye.h b/drivers/media/video/meye.h index d535748..5f70a10 100644 --- a/drivers/media/video/meye.h +++ b/drivers/media/video/meye.h @@ -311,6 +311,7 @@ struct meye { struct video_device *video_dev; /* video device parameters */ struct video_picture picture; /* video picture parameters */ struct meye_params params; /* additional parameters */ + unsigned long in_use; /* set to 1 if the device is in use */ #ifdef CONFIG_PM u8 pm_mchip_mode; /* old mchip mode */ #endif diff --git a/drivers/media/video/pms.c b/drivers/media/video/pms.c index 7c84f79..b39794f 100644 --- a/drivers/media/video/pms.c +++ b/drivers/media/video/pms.c @@ -47,6 +47,7 @@ struct pms_device struct video_picture picture; int height; int width; + unsigned long in_use; struct mutex lock; }; @@ -881,10 +882,27 @@ static ssize_t pms_read(struct file *file, char __user *buf, return len; } +static int pms_exclusive_open(struct inode *inode, struct file *file) +{ + struct video_device *v = video_devdata(file); + struct pms_device *pd = (struct pms_device *)v; + + return test_and_set_bit(0, &pd->in_use) ? -EBUSY : 0; +} + +static int pms_exclusive_release(struct inode *inode, struct file *file) +{ + struct video_device *v = video_devdata(file); + struct pms_device *pd = (struct pms_device *)v; + + clear_bit(0, &pd->in_use); + return 0; +} + static const struct file_operations pms_fops = { .owner = THIS_MODULE, - .open = video_exclusive_open, - .release = video_exclusive_release, + .open = pms_exclusive_open, + .release = pms_exclusive_release, .ioctl = pms_ioctl, #ifdef CONFIG_COMPAT .compat_ioctl = v4l_compat_ioctl32, diff --git a/drivers/media/video/saa5246a.c b/drivers/media/video/saa5246a.c index e2c538e..5f5aa20 100644 --- a/drivers/media/video/saa5246a.c +++ b/drivers/media/video/saa5246a.c @@ -61,6 +61,7 @@ struct saa5246a_device u8 pgbuf[NUM_DAUS][VTX_VIRTUALSIZE]; int is_searching[NUM_DAUS]; struct i2c_client *client; + unsigned long in_use; struct mutex lock; }; @@ -736,22 +737,14 @@ static int saa5246a_open(struct inode *inode, struct file *file) { struct video_device *vd = video_devdata(file); struct saa5246a_device *t = vd->priv; - int err; - lock_kernel(); - err = video_exclusive_open(inode,file); - if (err < 0) { - unlock_kernel(); - return err; - } + if (t->client == NULL) + return -ENODEV; - if (t->client==NULL) { - err = -ENODEV; - goto fail; - } + if (test_and_set_bit(0, &t->in_use)) + return -EBUSY; if (i2c_senddata(t, SAA5246A_REGISTER_R0, - R0_SELECT_R11 | R0_PLL_TIME_CONSTANT_LONG | R0_ENABLE_nODD_EVEN_OUTPUT | @@ -777,17 +770,10 @@ static int saa5246a_open(struct inode *inode, struct file *file) COMMAND_END)) { - err = -EIO; - goto fail; + clear_bit(0, &t->in_use); + return -EIO; } - unlock_kernel(); - return 0; - -fail: - video_exclusive_release(inode,file); - unlock_kernel(); - return err; } static int saa5246a_release(struct inode *inode, struct file *file) @@ -806,7 +792,7 @@ static int saa5246a_release(struct inode *inode, struct file *file) R1_VCS_TO_SCS, COMMAND_END); - video_exclusive_release(inode,file); + clear_bit(0, &t->in_use); return 0; } diff --git a/drivers/media/video/saa5249.c b/drivers/media/video/saa5249.c index 96c0fdf..dfd8a93 100644 --- a/drivers/media/video/saa5249.c +++ b/drivers/media/video/saa5249.c @@ -110,6 +110,7 @@ struct saa5249_device int disp_mode; int virtual_mode; struct i2c_client *client; + unsigned long in_use; struct mutex lock; }; @@ -631,34 +632,27 @@ static int saa5249_ioctl(struct inode *inode, struct file *file, static int saa5249_open(struct inode *inode, struct file *file) { struct video_device *vd = video_devdata(file); - struct saa5249_device *t=vd->priv; - int err,pgbuf; + struct saa5249_device *t = vd->priv; + int pgbuf; - lock_kernel(); - err = video_exclusive_open(inode,file); - if (err < 0) { - unlock_kernel(); - return err; - } + if (t->client == NULL) + return -ENODEV; - if (t->client==NULL) { - err = -ENODEV; - goto fail; - } + if (test_and_set_bit(0, &t->in_use)) + return -EBUSY; - if (i2c_senddata(t, 0, 0, -1) || /* Select R11 */ - /* Turn off parity checks (we do this ourselves) */ + if (i2c_senddata(t, 0, 0, -1) || /* Select R11 */ + /* Turn off parity checks (we do this ourselves) */ i2c_senddata(t, 1, disp_modes[t->disp_mode][0], 0, -1) || - /* Display TV-picture, no virtual rows */ - i2c_senddata(t, 4, NUM_DAUS, disp_modes[t->disp_mode][1], disp_modes[t->disp_mode][2], 7, -1)) /* Set display to page 4 */ - + /* Display TV-picture, no virtual rows */ + i2c_senddata(t, 4, NUM_DAUS, disp_modes[t->disp_mode][1], disp_modes[t->disp_mode][2], 7, -1)) + /* Set display to page 4 */ { - err = -EIO; - goto fail; + clear_bit(0, &t->in_use); + return -EIO; } - for (pgbuf = 0; pgbuf < NUM_DAUS; pgbuf++) - { + for (pgbuf = 0; pgbuf < NUM_DAUS; pgbuf++) { memset(t->vdau[pgbuf].pgbuf, ' ', sizeof(t->vdau[0].pgbuf)); memset(t->vdau[pgbuf].sregs, 0, sizeof(t->vdau[0].sregs)); memset(t->vdau[pgbuf].laststat, 0, sizeof(t->vdau[0].laststat)); @@ -668,13 +662,7 @@ static int saa5249_open(struct inode *inode, struct file *file) t->is_searching[pgbuf] = false; } t->virtual_mode = false; - unlock_kernel(); return 0; - - fail: - video_exclusive_release(inode,file); - unlock_kernel(); - return err; } @@ -682,10 +670,11 @@ static int saa5249_open(struct inode *inode, struct file *file) static int saa5249_release(struct inode *inode, struct file *file) { struct video_device *vd = video_devdata(file); - struct saa5249_device *t=vd->priv; + struct saa5249_device *t = vd->priv; + i2c_senddata(t, 1, 0x20, -1); /* Turn off CCT */ i2c_senddata(t, 5, 3, 3, -1); /* Turn off TV-display */ - video_exclusive_release(inode,file); + clear_bit(0, &t->in_use); return 0; } diff --git a/drivers/media/video/w9966.c b/drivers/media/video/w9966.c index 2ff00bc..c635cff 100644 --- a/drivers/media/video/w9966.c +++ b/drivers/media/video/w9966.c @@ -113,6 +113,7 @@ struct w9966_dev { signed char contrast; signed char color; signed char hue; + unsigned long in_use; }; /* @@ -184,10 +185,27 @@ static int w9966_v4l_ioctl(struct inode *inode, struct file *file, static ssize_t w9966_v4l_read(struct file *file, char __user *buf, size_t count, loff_t *ppos); +static int w9966_exclusive_open(struct inode *inode, struct file *file) +{ + struct video_device *vdev = video_devdata(file); + struct w9966_dev *cam = vdev->priv; + + return test_and_set_bit(0, &cam->in_use) ? -EBUSY : 0; +} + +static int w9966_exclusive_release(struct inode *inode, struct file *file) +{ + struct video_device *vdev = video_devdata(file); + struct w9966_dev *cam = vdev->priv; + + clear_bit(0, &cam->in_use); + return 0; +} + static const struct file_operations w9966_fops = { .owner = THIS_MODULE, - .open = video_exclusive_open, - .release = video_exclusive_release, + .open = w9966_exclusive_open, + .release = w9966_exclusive_release, .ioctl = w9966_v4l_ioctl, #ifdef CONFIG_COMPAT .compat_ioctl = v4l_compat_ioctl32, -- cgit v0.10.2 From cb353588e1946ab709be57dd8545598793acf912 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Sat, 23 Aug 2008 05:34:55 -0300 Subject: V4L/DVB (8781): v4l2-dev: remove obsolete video_exclusive_open/release Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/v4l2-dev.c b/drivers/media/video/v4l2-dev.c index 8903e41..66bd74b 100644 --- a/drivers/media/video/v4l2-dev.c +++ b/drivers/media/video/v4l2-dev.c @@ -141,34 +141,6 @@ static int video_open(struct inode *inode, struct file *file) return err; } -/* - * open/release helper functions -- handle exclusive opens - * Should be removed soon - */ -int video_exclusive_open(struct inode *inode, struct file *file) -{ - struct video_device *vfl = video_devdata(file); - int retval = 0; - - mutex_lock(&vfl->lock); - if (vfl->users) - retval = -EBUSY; - else - vfl->users++; - mutex_unlock(&vfl->lock); - return retval; -} -EXPORT_SYMBOL(video_exclusive_open); - -int video_exclusive_release(struct inode *inode, struct file *file) -{ - struct video_device *vfl = video_devdata(file); - - vfl->users--; - return 0; -} -EXPORT_SYMBOL(video_exclusive_release); - /** * get_index - assign stream number based on parent device * @vdev: video_device to assign index number to, vdev->dev should be assigned @@ -320,8 +292,6 @@ int video_register_device_index(struct video_device *vfd, int type, int nr, goto fail_minor; } - mutex_init(&vfd->lock); - /* sysfs class */ memset(&vfd->dev, 0x00, sizeof(vfd->dev)); vfd->dev.class = &video_class; diff --git a/include/media/v4l2-dev.h b/include/media/v4l2-dev.h index 2745e1a..e472b5d 100644 --- a/include/media/v4l2-dev.h +++ b/include/media/v4l2-dev.h @@ -77,10 +77,6 @@ struct video_device * Or use {pci|usb}_{get|set}_drvdata() directly. */ void *priv; #endif - - /* for videodev.c internal usage -- please don't touch */ - int users; /* video_exclusive_{open|close} ... */ - struct mutex lock; /* ... helper function uses these */ }; /* Class-dev to video-device */ @@ -111,8 +107,6 @@ static inline void video_set_drvdata(struct video_device *dev, void *data) /* Obsolete stuff - Still needed for radio devices and obsolete drivers */ extern struct video_device* video_devdata(struct file*); -extern int video_exclusive_open(struct inode *inode, struct file *file); -extern int video_exclusive_release(struct inode *inode, struct file *file); #endif #endif /* _V4L2_DEV_H */ -- cgit v0.10.2 From f9e86b5e9d068854a2cf40f8003ef639e80cca6c Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Sat, 23 Aug 2008 05:47:41 -0300 Subject: V4L/DVB (8782): v4l2-dev: add video_device_release_empty Add a second release function: video_device_release_empty It can be used by drivers that have statically allocated video_device structs. Its use usually, but not always, indicates laziness on the part of the driver programmer. Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/v4l2-dev.c b/drivers/media/video/v4l2-dev.c index 66bd74b..fda48a2 100644 --- a/drivers/media/video/v4l2-dev.c +++ b/drivers/media/video/v4l2-dev.c @@ -73,6 +73,13 @@ void video_device_release(struct video_device *vfd) } EXPORT_SYMBOL(video_device_release); +void video_device_release_empty(struct video_device *vfd) +{ + /* Do nothing */ + /* Only valid when the video_device struct is a static. */ +} +EXPORT_SYMBOL(video_device_release_empty); + static void video_release(struct device *cd) { struct video_device *vfd = container_of(cd, struct video_device, dev); diff --git a/include/media/v4l2-dev.h b/include/media/v4l2-dev.h index e472b5d..3085507 100644 --- a/include/media/v4l2-dev.h +++ b/include/media/v4l2-dev.h @@ -91,7 +91,12 @@ void video_unregister_device(struct video_device *); /* helper functions to alloc / release struct video_device, the later can be used for video_device->release() */ struct video_device *video_device_alloc(void); +/* this release function frees the vfd pointer */ void video_device_release(struct video_device *vfd); +/* this release function does nothing, use when the video_device is a + static global struct. Note that having a static video_device is + a dubious construction at best. */ +void video_device_release_empty(struct video_device *vfd); #ifdef OBSOLETE_DEVDATA /* to be removed soon */ /* helper functions to access driver private data. */ -- cgit v0.10.2 From aa5e90af7d78d1711f8f4275ce3638817c0023dc Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Sat, 23 Aug 2008 06:23:55 -0300 Subject: V4L/DVB (8783): v4l: add all missing video_device release callbacks All drivers that call video_device_register where checked to see if they set the release callback of struct video_device. Where that callback was missing it was added. Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/radio/radio-aimslab.c b/drivers/media/radio/radio-aimslab.c index b657c7b..59fdaf8 100644 --- a/drivers/media/radio/radio-aimslab.c +++ b/drivers/media/radio/radio-aimslab.c @@ -420,6 +420,7 @@ static struct video_device rtrack_radio = { .name = "RadioTrack radio", .fops = &rtrack_fops, .ioctl_ops = &rtrack_ioctl_ops, + .release = video_device_release_empty, }; static int __init rtrack_init(void) diff --git a/drivers/media/radio/radio-aztech.c b/drivers/media/radio/radio-aztech.c index ae18a7c..ddd9629 100644 --- a/drivers/media/radio/radio-aztech.c +++ b/drivers/media/radio/radio-aztech.c @@ -381,9 +381,10 @@ static const struct v4l2_ioctl_ops aztech_ioctl_ops = { }; static struct video_device aztech_radio = { - .name = "Aztech radio", - .fops = &aztech_fops, - .ioctl_ops = &aztech_ioctl_ops, + .name = "Aztech radio", + .fops = &aztech_fops, + .ioctl_ops = &aztech_ioctl_ops, + .release = video_device_release_empty, }; module_param_named(debug,aztech_radio.debug, int, 0644); diff --git a/drivers/media/radio/radio-cadet.c b/drivers/media/radio/radio-cadet.c index 04c3698..0490a1f 100644 --- a/drivers/media/radio/radio-cadet.c +++ b/drivers/media/radio/radio-cadet.c @@ -589,6 +589,7 @@ static struct video_device cadet_radio = { .name = "Cadet radio", .fops = &cadet_fops, .ioctl_ops = &cadet_ioctl_ops, + .release = video_device_release_empty, }; #ifdef CONFIG_PNP diff --git a/drivers/media/radio/radio-gemtek-pci.c b/drivers/media/radio/radio-gemtek-pci.c index a7b9a5d..d65fd28 100644 --- a/drivers/media/radio/radio-gemtek-pci.c +++ b/drivers/media/radio/radio-gemtek-pci.c @@ -401,9 +401,10 @@ static const struct v4l2_ioctl_ops gemtek_pci_ioctl_ops = { }; static struct video_device vdev_template = { - .name = "Gemtek PCI Radio", - .fops = &gemtek_pci_fops, - .ioctl_ops = &gemtek_pci_ioctl_ops, + .name = "Gemtek PCI Radio", + .fops = &gemtek_pci_fops, + .ioctl_ops = &gemtek_pci_ioctl_ops, + .release = video_device_release_empty, }; static int __devinit gemtek_pci_probe( struct pci_dev *pci_dev, const struct pci_device_id *pci_id ) diff --git a/drivers/media/radio/radio-gemtek.c b/drivers/media/radio/radio-gemtek.c index cc90329..2d991ae 100644 --- a/drivers/media/radio/radio-gemtek.c +++ b/drivers/media/radio/radio-gemtek.c @@ -581,9 +581,10 @@ static const struct v4l2_ioctl_ops gemtek_ioctl_ops = { }; static struct video_device gemtek_radio = { - .name = "GemTek Radio card", - .fops = &gemtek_fops, - .ioctl_ops = &gemtek_ioctl_ops, + .name = "GemTek Radio card", + .fops = &gemtek_fops, + .ioctl_ops = &gemtek_ioctl_ops, + .release = video_device_release_empty, }; /* diff --git a/drivers/media/radio/radio-maestro.c b/drivers/media/radio/radio-maestro.c index 03c2094..182b433 100644 --- a/drivers/media/radio/radio-maestro.c +++ b/drivers/media/radio/radio-maestro.c @@ -388,6 +388,7 @@ static struct video_device maestro_radio = { .name = "Maestro radio", .fops = &maestro_fops, .ioctl_ops = &maestro_ioctl_ops, + .release = video_device_release, }; static int __devinit maestro_probe(struct pci_dev *pdev, diff --git a/drivers/media/radio/radio-maxiradio.c b/drivers/media/radio/radio-maxiradio.c index 263ef8b..4e2e8a3 100644 --- a/drivers/media/radio/radio-maxiradio.c +++ b/drivers/media/radio/radio-maxiradio.c @@ -402,9 +402,10 @@ static const struct v4l2_ioctl_ops maxiradio_ioctl_ops = { }; static struct video_device maxiradio_radio = { - .name = "Maxi Radio FM2000 radio", - .fops = &maxiradio_fops, - .ioctl_ops = &maxiradio_ioctl_ops, + .name = "Maxi Radio FM2000 radio", + .fops = &maxiradio_fops, + .ioctl_ops = &maxiradio_ioctl_ops, + .release = video_device_release_empty, }; static int __devinit maxiradio_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) diff --git a/drivers/media/radio/radio-rtrack2.c b/drivers/media/radio/radio-rtrack2.c index 5b93b47..8fe820d 100644 --- a/drivers/media/radio/radio-rtrack2.c +++ b/drivers/media/radio/radio-rtrack2.c @@ -326,6 +326,7 @@ static struct video_device rtrack2_radio = { .name = "RadioTrack II radio", .fops = &rtrack2_fops, .ioctl_ops = &rtrack2_ioctl_ops, + .release = video_device_release_empty, }; static int __init rtrack2_init(void) diff --git a/drivers/media/radio/radio-sf16fmi.c b/drivers/media/radio/radio-sf16fmi.c index 55f8334..6d865a7 100644 --- a/drivers/media/radio/radio-sf16fmi.c +++ b/drivers/media/radio/radio-sf16fmi.c @@ -326,6 +326,7 @@ static struct video_device fmi_radio = { .name = "SF16FMx radio", .fops = &fmi_fops, .ioctl_ops = &fmi_ioctl_ops, + .release = video_device_release_empty, }; /* ladis: this is my card. does any other types exist? */ diff --git a/drivers/media/radio/radio-sf16fmr2.c b/drivers/media/radio/radio-sf16fmr2.c index 14153ed..9625d1f 100644 --- a/drivers/media/radio/radio-sf16fmr2.c +++ b/drivers/media/radio/radio-sf16fmr2.c @@ -442,6 +442,7 @@ static struct video_device fmr2_radio = { .name = "SF16FMR2 radio", .fops = &fmr2_fops, .ioctl_ops = &fmr2_ioctl_ops, + .release = video_device_release_empty, }; static int __init fmr2_init(void) diff --git a/drivers/media/radio/radio-terratec.c b/drivers/media/radio/radio-terratec.c index eed1497..de13ec8 100644 --- a/drivers/media/radio/radio-terratec.c +++ b/drivers/media/radio/radio-terratec.c @@ -398,6 +398,7 @@ static struct video_device terratec_radio = { .name = "TerraTec ActiveRadio", .fops = &terratec_fops, .ioctl_ops = &terratec_ioctl_ops, + .release = video_device_release_empty, }; static int __init terratec_init(void) diff --git a/drivers/media/radio/radio-trust.c b/drivers/media/radio/radio-trust.c index dd0c425..e7b111f 100644 --- a/drivers/media/radio/radio-trust.c +++ b/drivers/media/radio/radio-trust.c @@ -378,6 +378,7 @@ static struct video_device trust_radio = { .name = "Trust FM Radio", .fops = &trust_fops, .ioctl_ops = &trust_ioctl_ops, + .release = video_device_release_empty, }; static int __init trust_init(void) diff --git a/drivers/media/radio/radio-typhoon.c b/drivers/media/radio/radio-typhoon.c index 8784685..c2eedb7 100644 --- a/drivers/media/radio/radio-typhoon.c +++ b/drivers/media/radio/radio-typhoon.c @@ -375,6 +375,7 @@ static struct video_device typhoon_radio = { .name = "Typhoon Radio", .fops = &typhoon_fops, .ioctl_ops = &typhoon_ioctl_ops, + .release = video_device_release_empty, }; #ifdef CONFIG_RADIO_TYPHOON_PROC_FS diff --git a/drivers/media/radio/radio-zoltrix.c b/drivers/media/radio/radio-zoltrix.c index 4d76e71..0d43e84 100644 --- a/drivers/media/radio/radio-zoltrix.c +++ b/drivers/media/radio/radio-zoltrix.c @@ -439,6 +439,7 @@ static struct video_device zoltrix_radio = { .name = "Zoltrix Radio Plus", .fops = &zoltrix_fops, .ioctl_ops = &zoltrix_ioctl_ops, + .release = video_device_release_empty, }; static int __init zoltrix_init(void) diff --git a/drivers/media/video/bw-qcam.c b/drivers/media/video/bw-qcam.c index e8e1bb1..ace4ff9 100644 --- a/drivers/media/video/bw-qcam.c +++ b/drivers/media/video/bw-qcam.c @@ -926,6 +926,7 @@ static struct video_device qcam_template= { .name = "Connectix Quickcam", .fops = &qcam_fops, + .release = video_device_release_empty, }; #define MAX_CAMS 4 diff --git a/drivers/media/video/c-qcam.c b/drivers/media/video/c-qcam.c index 2196c1d..17aa0ad 100644 --- a/drivers/media/video/c-qcam.c +++ b/drivers/media/video/c-qcam.c @@ -722,6 +722,7 @@ static struct video_device qcam_template= { .name = "Colour QuickCam", .fops = &qcam_fops, + .release = video_device_release_empty, }; /* Initialize the QuickCam driver control structure. */ diff --git a/drivers/media/video/cpia.c b/drivers/media/video/cpia.c index a661800..c0600fd 100644 --- a/drivers/media/video/cpia.c +++ b/drivers/media/video/cpia.c @@ -3801,6 +3801,7 @@ static const struct file_operations cpia_fops = { static struct video_device cpia_template = { .name = "CPiA Camera", .fops = &cpia_fops, + .release = video_device_release_empty, }; /* initialise cam_data structure */ diff --git a/drivers/media/video/pms.c b/drivers/media/video/pms.c index b39794f..9948078 100644 --- a/drivers/media/video/pms.c +++ b/drivers/media/video/pms.c @@ -915,6 +915,7 @@ static struct video_device pms_template= { .name = "Mediavision PMS", .fops = &pms_fops, + .release = video_device_release_empty, }; static struct pms_device pms_device; diff --git a/drivers/media/video/saa5249.c b/drivers/media/video/saa5249.c index dfd8a93..225117c 100644 --- a/drivers/media/video/saa5249.c +++ b/drivers/media/video/saa5249.c @@ -708,6 +708,7 @@ static struct video_device saa_template = { .name = IF_NAME, .fops = &saa_fops, + .release = video_device_release, }; MODULE_LICENSE("GPL"); diff --git a/drivers/media/video/se401.c b/drivers/media/video/se401.c index d16bbf0..b01f25d 100644 --- a/drivers/media/video/se401.c +++ b/drivers/media/video/se401.c @@ -1236,6 +1236,7 @@ static const struct file_operations se401_fops = { static struct video_device se401_template = { .name = "se401 USB camera", .fops = &se401_fops, + .release = video_device_release_empty, }; diff --git a/drivers/media/video/stradis.c b/drivers/media/video/stradis.c index a3cbe9b..bbad54f 100644 --- a/drivers/media/video/stradis.c +++ b/drivers/media/video/stradis.c @@ -1925,6 +1925,7 @@ static struct video_device saa_template = { .name = "SAA7146A", .fops = &saa_fops, .minor = -1, + .release = video_device_release_empty, }; static int __devinit configure_saa7146(struct pci_dev *pdev, int num) diff --git a/drivers/media/video/usbvideo/usbvideo.c b/drivers/media/video/usbvideo/usbvideo.c index 6b1b200..9569e8c 100644 --- a/drivers/media/video/usbvideo/usbvideo.c +++ b/drivers/media/video/usbvideo/usbvideo.c @@ -1006,10 +1006,6 @@ allocate_done: EXPORT_SYMBOL(usbvideo_AllocateDevice); -static void usbvideo_dummy_release(struct video_device *vfd) -{ -} - int usbvideo_RegisterVideoDevice(struct uvd *uvd) { char tmp1[20], tmp2[20]; /* Buffers for printing */ @@ -1043,7 +1039,7 @@ int usbvideo_RegisterVideoDevice(struct uvd *uvd) return -EINVAL; } uvd->vdev.parent = &uvd->dev->dev; - uvd->vdev.release = usbvideo_dummy_release; + uvd->vdev.release = video_device_release_empty; if (video_register_device(&uvd->vdev, VFL_TYPE_GRABBER, video_nr) < 0) { err("%s: video_register_device failed", __func__); return -EPIPE; diff --git a/drivers/media/video/usbvideo/vicam.c b/drivers/media/video/usbvideo/vicam.c index efb878a..d772825 100644 --- a/drivers/media/video/usbvideo/vicam.c +++ b/drivers/media/video/usbvideo/vicam.c @@ -801,6 +801,7 @@ static struct video_device vicam_template = { .name = "ViCam-based USB Camera", .fops = &vicam_fops, .minor = -1, + .release = video_device_release_empty, }; /* table of devices that work with this driver */ diff --git a/drivers/media/video/w9966.c b/drivers/media/video/w9966.c index c635cff..e358011 100644 --- a/drivers/media/video/w9966.c +++ b/drivers/media/video/w9966.c @@ -216,6 +216,7 @@ static const struct file_operations w9966_fops = { static struct video_device w9966_template = { .name = W9966_DRIVERNAME, .fops = &w9966_fops, + .release = video_device_release_empty, }; /* -- cgit v0.10.2 From d6e7497eaf9889d39a070f60309a9bcea1fd29f6 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Sat, 23 Aug 2008 06:27:59 -0300 Subject: V4L/DVB (8784): v4l2-dev: make the video_device's release callback mandatory Now that all drivers set the release callback in the video_device struct we can put in a BUG_ON in video_register_device to ensure that the callback is always there. Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/v4l2-dev.c b/drivers/media/video/v4l2-dev.c index fda48a2..ff219df 100644 --- a/drivers/media/video/v4l2-dev.c +++ b/drivers/media/video/v4l2-dev.c @@ -84,11 +84,6 @@ static void video_release(struct device *cd) { struct video_device *vfd = container_of(cd, struct video_device, dev); -#if 1 - /* needed until all drivers are fixed */ - if (!vfd->release) - return; -#endif vfd->release(vfd); } @@ -233,8 +228,8 @@ int video_register_device_index(struct video_device *vfd, int type, int nr, int ret; char *name_base; - if (vfd == NULL) - return -EINVAL; + /* the release callback MUST be present */ + BUG_ON(!vfd->release); if (vfd == NULL) return -EINVAL; @@ -312,13 +307,6 @@ int video_register_device_index(struct video_device *vfd, int type, int nr, goto fail_minor; } -#if 1 - /* needed until all drivers are fixed */ - if (!vfd->release) - printk(KERN_WARNING "videodev: \"%s\" has no release callback. " - "Please fix your driver for proper sysfs support, see " - "http://lwn.net/Articles/36850/\n", vfd->name); -#endif return 0; fail_minor: -- cgit v0.10.2 From e138c592b50370621653fd962b2bc3f4e25dfe78 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Sat, 23 Aug 2008 06:38:11 -0300 Subject: V4L/DVB (8785): v4l2: add __must_check to v4l2_dev.h Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab diff --git a/include/media/v4l2-dev.h b/include/media/v4l2-dev.h index 3085507..23df009 100644 --- a/include/media/v4l2-dev.h +++ b/include/media/v4l2-dev.h @@ -83,14 +83,14 @@ struct video_device #define to_video_device(cd) container_of(cd, struct video_device, dev) /* Version 2 functions */ -extern int video_register_device(struct video_device *vfd, int type, int nr); -int video_register_device_index(struct video_device *vfd, int type, int nr, +int __must_check video_register_device(struct video_device *vfd, int type, int nr); +int __must_check video_register_device_index(struct video_device *vfd, int type, int nr, int index); void video_unregister_device(struct video_device *); /* helper functions to alloc / release struct video_device, the later can be used for video_device->release() */ -struct video_device *video_device_alloc(void); +struct video_device * __must_check video_device_alloc(void); /* this release function frees the vfd pointer */ void video_device_release(struct video_device *vfd); /* this release function does nothing, use when the video_device is a -- cgit v0.10.2 From 601e9444f249d219009ec05674268d90f6f1cdcb Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Sat, 23 Aug 2008 07:24:07 -0300 Subject: V4L/DVB (8786): v4l2: remove the priv field, use dev_get_drvdata instead Remove the priv field and let video_get/set_drvdata use dev_get_drvdata and dev_set_drvdata instead. Convert all drivers that still used priv directly. Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/common/saa7146_fops.c b/drivers/media/common/saa7146_fops.c index cf6a817..5b34c13 100644 --- a/drivers/media/common/saa7146_fops.c +++ b/drivers/media/common/saa7146_fops.c @@ -533,7 +533,7 @@ int saa7146_register_device(struct video_device **vid, struct saa7146_dev* dev, memcpy(vfd, &device_template, sizeof(struct video_device)); strlcpy(vfd->name, name, sizeof(vfd->name)); vfd->release = video_device_release; - vfd->priv = dev; + video_set_drvdata(vfd, dev); // fixme: -1 should be an insmod parameter *for the extension* (like "video_nr"); if (video_register_device(vfd, type, -1) < 0) { diff --git a/drivers/media/radio/radio-aimslab.c b/drivers/media/radio/radio-aimslab.c index 59fdaf8..62cc687 100644 --- a/drivers/media/radio/radio-aimslab.c +++ b/drivers/media/radio/radio-aimslab.c @@ -247,7 +247,7 @@ static int vidioc_g_tuner(struct file *file, void *priv, struct v4l2_tuner *v) { struct video_device *dev = video_devdata(file); - struct rt_device *rt = dev->priv; + struct rt_device *rt = video_get_drvdata(dev); if (v->index > 0) return -EINVAL; @@ -275,7 +275,7 @@ static int vidioc_s_frequency(struct file *file, void *priv, struct v4l2_frequency *f) { struct video_device *dev = video_devdata(file); - struct rt_device *rt = dev->priv; + struct rt_device *rt = video_get_drvdata(dev); rt->curfreq = f->frequency; rt_setfreq(rt, rt->curfreq); @@ -286,7 +286,7 @@ static int vidioc_g_frequency(struct file *file, void *priv, struct v4l2_frequency *f) { struct video_device *dev = video_devdata(file); - struct rt_device *rt = dev->priv; + struct rt_device *rt = video_get_drvdata(dev); f->type = V4L2_TUNER_RADIO; f->frequency = rt->curfreq; @@ -312,7 +312,7 @@ static int vidioc_g_ctrl(struct file *file, void *priv, struct v4l2_control *ctrl) { struct video_device *dev = video_devdata(file); - struct rt_device *rt = dev->priv; + struct rt_device *rt = video_get_drvdata(dev); switch (ctrl->id) { case V4L2_CID_AUDIO_MUTE: @@ -329,7 +329,7 @@ static int vidioc_s_ctrl(struct file *file, void *priv, struct v4l2_control *ctrl) { struct video_device *dev = video_devdata(file); - struct rt_device *rt = dev->priv; + struct rt_device *rt = video_get_drvdata(dev); switch (ctrl->id) { case V4L2_CID_AUDIO_MUTE: @@ -437,7 +437,7 @@ static int __init rtrack_init(void) return -EBUSY; } - rtrack_radio.priv=&rtrack_unit; + video_set_drvdata(&rtrack_radio, &rtrack_unit); if (video_register_device(&rtrack_radio, VFL_TYPE_RADIO, radio_nr) < 0) { release_region(io, 2); diff --git a/drivers/media/radio/radio-aztech.c b/drivers/media/radio/radio-aztech.c index ddd9629..5dd5e34 100644 --- a/drivers/media/radio/radio-aztech.c +++ b/drivers/media/radio/radio-aztech.c @@ -197,7 +197,7 @@ static int vidioc_g_tuner (struct file *file, void *priv, struct v4l2_tuner *v) { struct video_device *dev = video_devdata(file); - struct az_device *az = dev->priv; + struct az_device *az = video_get_drvdata(dev); if (v->index > 0) return -EINVAL; @@ -266,7 +266,7 @@ static int vidioc_s_frequency (struct file *file, void *priv, struct v4l2_frequency *f) { struct video_device *dev = video_devdata(file); - struct az_device *az = dev->priv; + struct az_device *az = video_get_drvdata(dev); az->curfreq = f->frequency; az_setfreq(az, az->curfreq); @@ -277,7 +277,7 @@ static int vidioc_g_frequency (struct file *file, void *priv, struct v4l2_frequency *f) { struct video_device *dev = video_devdata(file); - struct az_device *az = dev->priv; + struct az_device *az = video_get_drvdata(dev); f->type = V4L2_TUNER_RADIO; f->frequency = az->curfreq; @@ -304,7 +304,7 @@ static int vidioc_g_ctrl (struct file *file, void *priv, struct v4l2_control *ctrl) { struct video_device *dev = video_devdata(file); - struct az_device *az = dev->priv; + struct az_device *az = video_get_drvdata(dev); switch (ctrl->id) { case V4L2_CID_AUDIO_MUTE: @@ -324,7 +324,7 @@ static int vidioc_s_ctrl (struct file *file, void *priv, struct v4l2_control *ctrl) { struct video_device *dev = video_devdata(file); - struct az_device *az = dev->priv; + struct az_device *az = video_get_drvdata(dev); switch (ctrl->id) { case V4L2_CID_AUDIO_MUTE: @@ -405,7 +405,7 @@ static int __init aztech_init(void) } mutex_init(&lock); - aztech_radio.priv=&aztech_unit; + video_set_drvdata(&aztech_radio, &aztech_unit); if (video_register_device(&aztech_radio, VFL_TYPE_RADIO, radio_nr) < 0) { release_region(io,2); diff --git a/drivers/media/radio/radio-gemtek-pci.c b/drivers/media/radio/radio-gemtek-pci.c index d65fd28..1f57f73 100644 --- a/drivers/media/radio/radio-gemtek-pci.c +++ b/drivers/media/radio/radio-gemtek-pci.c @@ -205,7 +205,7 @@ static int vidioc_g_tuner(struct file *file, void *priv, struct v4l2_tuner *v) { struct video_device *dev = video_devdata(file); - struct gemtek_pci_card *card = dev->priv; + struct gemtek_pci_card *card = video_get_drvdata(dev); if (v->index > 0) return -EINVAL; @@ -233,7 +233,7 @@ static int vidioc_s_frequency(struct file *file, void *priv, struct v4l2_frequency *f) { struct video_device *dev = video_devdata(file); - struct gemtek_pci_card *card = dev->priv; + struct gemtek_pci_card *card = video_get_drvdata(dev); if ( (f->frequency < GEMTEK_PCI_RANGE_LOW) || (f->frequency > GEMTEK_PCI_RANGE_HIGH) ) @@ -248,7 +248,7 @@ static int vidioc_g_frequency(struct file *file, void *priv, struct v4l2_frequency *f) { struct video_device *dev = video_devdata(file); - struct gemtek_pci_card *card = dev->priv; + struct gemtek_pci_card *card = video_get_drvdata(dev); f->type = V4L2_TUNER_RADIO; f->frequency = card->current_frequency; @@ -273,7 +273,7 @@ static int vidioc_g_ctrl(struct file *file, void *priv, struct v4l2_control *ctrl) { struct video_device *dev = video_devdata(file); - struct gemtek_pci_card *card = dev->priv; + struct gemtek_pci_card *card = video_get_drvdata(dev); switch (ctrl->id) { case V4L2_CID_AUDIO_MUTE: @@ -293,7 +293,7 @@ static int vidioc_s_ctrl(struct file *file, void *priv, struct v4l2_control *ctrl) { struct video_device *dev = video_devdata(file); - struct gemtek_pci_card *card = dev->priv; + struct gemtek_pci_card *card = video_get_drvdata(dev); switch (ctrl->id) { case V4L2_CID_AUDIO_MUTE: @@ -442,7 +442,7 @@ static int __devinit gemtek_pci_probe( struct pci_dev *pci_dev, const struct pci } card->videodev = devradio; - devradio->priv = card; + video_set_drvdata(devradio, card); gemtek_pci_mute( card ); printk( KERN_INFO "Gemtek PCI Radio (rev. %d) found at 0x%04x-0x%04x.\n", diff --git a/drivers/media/radio/radio-gemtek.c b/drivers/media/radio/radio-gemtek.c index 2d991ae..2c4c15e 100644 --- a/drivers/media/radio/radio-gemtek.c +++ b/drivers/media/radio/radio-gemtek.c @@ -460,7 +460,7 @@ static int vidioc_s_frequency(struct file *file, void *priv, struct v4l2_frequency *f) { struct video_device *dev = video_devdata(file); - struct gemtek_device *rt = dev->priv; + struct gemtek_device *rt = video_get_drvdata(dev); gemtek_setfreq(rt, f->frequency); @@ -471,7 +471,7 @@ static int vidioc_g_frequency(struct file *file, void *priv, struct v4l2_frequency *f) { struct video_device *dev = video_devdata(file); - struct gemtek_device *rt = dev->priv; + struct gemtek_device *rt = video_get_drvdata(dev); f->type = V4L2_TUNER_RADIO; f->frequency = rt->lastfreq; @@ -496,7 +496,7 @@ static int vidioc_g_ctrl(struct file *file, void *priv, struct v4l2_control *ctrl) { struct video_device *dev = video_devdata(file); - struct gemtek_device *rt = dev->priv; + struct gemtek_device *rt = video_get_drvdata(dev); switch (ctrl->id) { case V4L2_CID_AUDIO_MUTE: @@ -516,7 +516,7 @@ static int vidioc_s_ctrl(struct file *file, void *priv, struct v4l2_control *ctrl) { struct video_device *dev = video_devdata(file); - struct gemtek_device *rt = dev->priv; + struct gemtek_device *rt = video_get_drvdata(dev); switch (ctrl->id) { case V4L2_CID_AUDIO_MUTE: @@ -623,7 +623,7 @@ static int __init gemtek_init(void) return -EINVAL; } - gemtek_radio.priv = &gemtek_unit; + video_set_drvdata(&gemtek_radio, &gemtek_unit); if (video_register_device(&gemtek_radio, VFL_TYPE_RADIO, radio_nr) < 0) { release_region(io, 1); diff --git a/drivers/media/radio/radio-maxiradio.c b/drivers/media/radio/radio-maxiradio.c index 4e2e8a3..9bf2acf 100644 --- a/drivers/media/radio/radio-maxiradio.c +++ b/drivers/media/radio/radio-maxiradio.c @@ -232,7 +232,7 @@ static int vidioc_g_tuner (struct file *file, void *priv, struct v4l2_tuner *v) { struct video_device *dev = video_devdata(file); - struct radio_device *card=dev->priv; + struct radio_device *card = video_get_drvdata(dev); if (v->index > 0) return -EINVAL; @@ -303,7 +303,7 @@ static int vidioc_s_frequency (struct file *file, void *priv, struct v4l2_frequency *f) { struct video_device *dev = video_devdata(file); - struct radio_device *card=dev->priv; + struct radio_device *card = video_get_drvdata(dev); if (f->frequency < FREQ_LO || f->frequency > FREQ_HI) { dprintk(1, "radio freq (%d.%02d MHz) out of range (%d-%d)\n", @@ -325,7 +325,7 @@ static int vidioc_g_frequency (struct file *file, void *priv, struct v4l2_frequency *f) { struct video_device *dev = video_devdata(file); - struct radio_device *card=dev->priv; + struct radio_device *card = video_get_drvdata(dev); f->type = V4L2_TUNER_RADIO; f->frequency = card->freq; @@ -356,7 +356,7 @@ static int vidioc_g_ctrl (struct file *file, void *priv, struct v4l2_control *ctrl) { struct video_device *dev = video_devdata(file); - struct radio_device *card=dev->priv; + struct radio_device *card = video_get_drvdata(dev); switch (ctrl->id) { case V4L2_CID_AUDIO_MUTE: @@ -371,7 +371,7 @@ static int vidioc_s_ctrl (struct file *file, void *priv, struct v4l2_control *ctrl) { struct video_device *dev = video_devdata(file); - struct radio_device *card=dev->priv; + struct radio_device *card = video_get_drvdata(dev); switch (ctrl->id) { case V4L2_CID_AUDIO_MUTE: @@ -421,7 +421,7 @@ static int __devinit maxiradio_init_one(struct pci_dev *pdev, const struct pci_d radio_unit.io = pci_resource_start(pdev, 0); mutex_init(&radio_unit.lock); - maxiradio_radio.priv = &radio_unit; + video_set_drvdata(&maxiradio_radio, &radio_unit); if (video_register_device(&maxiradio_radio, VFL_TYPE_RADIO, radio_nr) < 0) { printk("radio-maxiradio: can't register device!"); diff --git a/drivers/media/radio/radio-rtrack2.c b/drivers/media/radio/radio-rtrack2.c index 8fe820d..4234f7e 100644 --- a/drivers/media/radio/radio-rtrack2.c +++ b/drivers/media/radio/radio-rtrack2.c @@ -155,7 +155,7 @@ static int vidioc_g_tuner(struct file *file, void *priv, struct v4l2_tuner *v) { struct video_device *dev = video_devdata(file); - struct rt_device *rt = dev->priv; + struct rt_device *rt = video_get_drvdata(dev); if (v->index > 0) return -EINVAL; @@ -175,7 +175,7 @@ static int vidioc_s_frequency(struct file *file, void *priv, struct v4l2_frequency *f) { struct video_device *dev = video_devdata(file); - struct rt_device *rt = dev->priv; + struct rt_device *rt = video_get_drvdata(dev); rt->curfreq = f->frequency; rt_setfreq(rt, rt->curfreq); @@ -186,7 +186,7 @@ static int vidioc_g_frequency(struct file *file, void *priv, struct v4l2_frequency *f) { struct video_device *dev = video_devdata(file); - struct rt_device *rt = dev->priv; + struct rt_device *rt = video_get_drvdata(dev); f->type = V4L2_TUNER_RADIO; f->frequency = rt->curfreq; @@ -212,7 +212,7 @@ static int vidioc_g_ctrl(struct file *file, void *priv, struct v4l2_control *ctrl) { struct video_device *dev = video_devdata(file); - struct rt_device *rt = dev->priv; + struct rt_device *rt = video_get_drvdata(dev); switch (ctrl->id) { case V4L2_CID_AUDIO_MUTE: @@ -232,7 +232,7 @@ static int vidioc_s_ctrl(struct file *file, void *priv, struct v4l2_control *ctrl) { struct video_device *dev = video_devdata(file); - struct rt_device *rt = dev->priv; + struct rt_device *rt = video_get_drvdata(dev); switch (ctrl->id) { case V4L2_CID_AUDIO_MUTE: @@ -342,7 +342,7 @@ static int __init rtrack2_init(void) return -EBUSY; } - rtrack2_radio.priv=&rtrack2_unit; + video_set_drvdata(&rtrack2_radio, &rtrack2_unit); spin_lock_init(&lock); if (video_register_device(&rtrack2_radio, VFL_TYPE_RADIO, radio_nr) < 0) { diff --git a/drivers/media/radio/radio-sf16fmi.c b/drivers/media/radio/radio-sf16fmi.c index 6d865a7..810c366 100644 --- a/drivers/media/radio/radio-sf16fmi.c +++ b/drivers/media/radio/radio-sf16fmi.c @@ -148,7 +148,7 @@ static int vidioc_g_tuner(struct file *file, void *priv, { int mult; struct video_device *dev = video_devdata(file); - struct fmi_device *fmi = dev->priv; + struct fmi_device *fmi = video_get_drvdata(dev); if (v->index > 0) return -EINVAL; @@ -177,7 +177,7 @@ static int vidioc_s_frequency(struct file *file, void *priv, struct v4l2_frequency *f) { struct video_device *dev = video_devdata(file); - struct fmi_device *fmi = dev->priv; + struct fmi_device *fmi = video_get_drvdata(dev); if (!(fmi->flags & V4L2_TUNER_CAP_LOW)) f->frequency *= 1000; @@ -195,7 +195,7 @@ static int vidioc_g_frequency(struct file *file, void *priv, struct v4l2_frequency *f) { struct video_device *dev = video_devdata(file); - struct fmi_device *fmi = dev->priv; + struct fmi_device *fmi = video_get_drvdata(dev); f->type = V4L2_TUNER_RADIO; f->frequency = fmi->curfreq; @@ -223,7 +223,7 @@ static int vidioc_g_ctrl(struct file *file, void *priv, struct v4l2_control *ctrl) { struct video_device *dev = video_devdata(file); - struct fmi_device *fmi = dev->priv; + struct fmi_device *fmi = video_get_drvdata(dev); switch (ctrl->id) { case V4L2_CID_AUDIO_MUTE: @@ -237,7 +237,7 @@ static int vidioc_s_ctrl(struct file *file, void *priv, struct v4l2_control *ctrl) { struct video_device *dev = video_devdata(file); - struct fmi_device *fmi = dev->priv; + struct fmi_device *fmi = video_get_drvdata(dev); switch (ctrl->id) { case V4L2_CID_AUDIO_MUTE: @@ -386,7 +386,7 @@ static int __init fmi_init(void) fmi_unit.curvol = 0; fmi_unit.curfreq = 0; fmi_unit.flags = V4L2_TUNER_CAP_LOW; - fmi_radio.priv = &fmi_unit; + video_set_drvdata(&fmi_radio, &fmi_unit); mutex_init(&lock); diff --git a/drivers/media/radio/radio-sf16fmr2.c b/drivers/media/radio/radio-sf16fmr2.c index 9625d1f..9f82315 100644 --- a/drivers/media/radio/radio-sf16fmr2.c +++ b/drivers/media/radio/radio-sf16fmr2.c @@ -231,7 +231,7 @@ static int vidioc_g_tuner(struct file *file, void *priv, { int mult; struct video_device *dev = video_devdata(file); - struct fmr2_device *fmr2 = dev->priv; + struct fmr2_device *fmr2 = video_get_drvdata(dev); if (v->index > 0) return -EINVAL; @@ -264,7 +264,7 @@ static int vidioc_s_frequency(struct file *file, void *priv, struct v4l2_frequency *f) { struct video_device *dev = video_devdata(file); - struct fmr2_device *fmr2 = dev->priv; + struct fmr2_device *fmr2 = video_get_drvdata(dev); if (!(fmr2->flags & V4L2_TUNER_CAP_LOW)) f->frequency *= 1000; @@ -288,7 +288,7 @@ static int vidioc_g_frequency(struct file *file, void *priv, struct v4l2_frequency *f) { struct video_device *dev = video_devdata(file); - struct fmr2_device *fmr2 = dev->priv; + struct fmr2_device *fmr2 = video_get_drvdata(dev); f->type = V4L2_TUNER_RADIO; f->frequency = fmr2->curfreq; @@ -315,7 +315,7 @@ static int vidioc_g_ctrl(struct file *file, void *priv, struct v4l2_control *ctrl) { struct video_device *dev = video_devdata(file); - struct fmr2_device *fmr2 = dev->priv; + struct fmr2_device *fmr2 = video_get_drvdata(dev); switch (ctrl->id) { case V4L2_CID_AUDIO_MUTE: @@ -332,7 +332,7 @@ static int vidioc_s_ctrl(struct file *file, void *priv, struct v4l2_control *ctrl) { struct video_device *dev = video_devdata(file); - struct fmr2_device *fmr2 = dev->priv; + struct fmr2_device *fmr2 = video_get_drvdata(dev); switch (ctrl->id) { case V4L2_CID_AUDIO_MUTE: @@ -454,7 +454,7 @@ static int __init fmr2_init(void) fmr2_unit.stereo = 1; fmr2_unit.flags = V4L2_TUNER_CAP_LOW; fmr2_unit.card_type = 0; - fmr2_radio.priv = &fmr2_unit; + video_set_drvdata(&fmr2_radio, &fmr2_unit); mutex_init(&lock); diff --git a/drivers/media/radio/radio-terratec.c b/drivers/media/radio/radio-terratec.c index de13ec8..0bc9af6 100644 --- a/drivers/media/radio/radio-terratec.c +++ b/drivers/media/radio/radio-terratec.c @@ -222,7 +222,7 @@ static int vidioc_g_tuner(struct file *file, void *priv, struct v4l2_tuner *v) { struct video_device *dev = video_devdata(file); - struct tt_device *tt = dev->priv; + struct tt_device *tt = video_get_drvdata(dev); if (v->index > 0) return -EINVAL; @@ -250,7 +250,7 @@ static int vidioc_s_frequency(struct file *file, void *priv, struct v4l2_frequency *f) { struct video_device *dev = video_devdata(file); - struct tt_device *tt = dev->priv; + struct tt_device *tt = video_get_drvdata(dev); tt->curfreq = f->frequency; tt_setfreq(tt, tt->curfreq); @@ -261,7 +261,7 @@ static int vidioc_g_frequency(struct file *file, void *priv, struct v4l2_frequency *f) { struct video_device *dev = video_devdata(file); - struct tt_device *tt = dev->priv; + struct tt_device *tt = video_get_drvdata(dev); f->type = V4L2_TUNER_RADIO; f->frequency = tt->curfreq; @@ -287,7 +287,7 @@ static int vidioc_g_ctrl(struct file *file, void *priv, struct v4l2_control *ctrl) { struct video_device *dev = video_devdata(file); - struct tt_device *tt = dev->priv; + struct tt_device *tt = video_get_drvdata(dev); switch (ctrl->id) { case V4L2_CID_AUDIO_MUTE: @@ -307,7 +307,7 @@ static int vidioc_s_ctrl(struct file *file, void *priv, struct v4l2_control *ctrl) { struct video_device *dev = video_devdata(file); - struct tt_device *tt = dev->priv; + struct tt_device *tt = video_get_drvdata(dev); switch (ctrl->id) { case V4L2_CID_AUDIO_MUTE: @@ -414,7 +414,7 @@ static int __init terratec_init(void) return -EBUSY; } - terratec_radio.priv=&terratec_unit; + video_set_drvdata(&terratec_radio, &terratec_unit); spin_lock_init(&lock); diff --git a/drivers/media/radio/radio-typhoon.c b/drivers/media/radio/radio-typhoon.c index c2eedb7..27255d7 100644 --- a/drivers/media/radio/radio-typhoon.c +++ b/drivers/media/radio/radio-typhoon.c @@ -224,7 +224,7 @@ static int vidioc_s_frequency(struct file *file, void *priv, struct v4l2_frequency *f) { struct video_device *dev = video_devdata(file); - struct typhoon_device *typhoon = dev->priv; + struct typhoon_device *typhoon = video_get_drvdata(dev); typhoon->curfreq = f->frequency; typhoon_setfreq(typhoon, typhoon->curfreq); @@ -235,7 +235,7 @@ static int vidioc_g_frequency(struct file *file, void *priv, struct v4l2_frequency *f) { struct video_device *dev = video_devdata(file); - struct typhoon_device *typhoon = dev->priv; + struct typhoon_device *typhoon = video_get_drvdata(dev); f->type = V4L2_TUNER_RADIO; f->frequency = typhoon->curfreq; @@ -262,7 +262,7 @@ static int vidioc_g_ctrl(struct file *file, void *priv, struct v4l2_control *ctrl) { struct video_device *dev = video_devdata(file); - struct typhoon_device *typhoon = dev->priv; + struct typhoon_device *typhoon = video_get_drvdata(dev); switch (ctrl->id) { case V4L2_CID_AUDIO_MUTE: @@ -279,7 +279,7 @@ static int vidioc_s_ctrl (struct file *file, void *priv, struct v4l2_control *ctrl) { struct video_device *dev = video_devdata(file); - struct typhoon_device *typhoon = dev->priv; + struct typhoon_device *typhoon = video_get_drvdata(dev); switch (ctrl->id) { case V4L2_CID_AUDIO_MUTE: @@ -458,7 +458,7 @@ static int __init typhoon_init(void) return -EBUSY; } - typhoon_radio.priv = &typhoon_unit; + video_set_drvdata(&typhoon_radio, &typhoon_unit); if (video_register_device(&typhoon_radio, VFL_TYPE_RADIO, radio_nr) < 0) { release_region(io, 8); return -EINVAL; diff --git a/drivers/media/radio/radio-zoltrix.c b/drivers/media/radio/radio-zoltrix.c index 0d43e84..3a9a777 100644 --- a/drivers/media/radio/radio-zoltrix.c +++ b/drivers/media/radio/radio-zoltrix.c @@ -247,7 +247,7 @@ static int vidioc_g_tuner(struct file *file, void *priv, struct v4l2_tuner *v) { struct video_device *dev = video_devdata(file); - struct zol_device *zol = dev->priv; + struct zol_device *zol = video_get_drvdata(dev); if (v->index > 0) return -EINVAL; @@ -278,7 +278,7 @@ static int vidioc_s_frequency(struct file *file, void *priv, struct v4l2_frequency *f) { struct video_device *dev = video_devdata(file); - struct zol_device *zol = dev->priv; + struct zol_device *zol = video_get_drvdata(dev); zol->curfreq = f->frequency; zol_setfreq(zol, zol->curfreq); @@ -289,7 +289,7 @@ static int vidioc_g_frequency(struct file *file, void *priv, struct v4l2_frequency *f) { struct video_device *dev = video_devdata(file); - struct zol_device *zol = dev->priv; + struct zol_device *zol = video_get_drvdata(dev); f->type = V4L2_TUNER_RADIO; f->frequency = zol->curfreq; @@ -315,7 +315,7 @@ static int vidioc_g_ctrl(struct file *file, void *priv, struct v4l2_control *ctrl) { struct video_device *dev = video_devdata(file); - struct zol_device *zol = dev->priv; + struct zol_device *zol = video_get_drvdata(dev); switch (ctrl->id) { case V4L2_CID_AUDIO_MUTE: @@ -332,7 +332,7 @@ static int vidioc_s_ctrl(struct file *file, void *priv, struct v4l2_control *ctrl) { struct video_device *dev = video_devdata(file); - struct zol_device *zol = dev->priv; + struct zol_device *zol = video_get_drvdata(dev); switch (ctrl->id) { case V4L2_CID_AUDIO_MUTE: @@ -453,7 +453,7 @@ static int __init zoltrix_init(void) return -ENXIO; } - zoltrix_radio.priv = &zoltrix_unit; + video_set_drvdata(&zoltrix_radio, &zoltrix_unit); if (!request_region(io, 2, "zoltrix")) { printk(KERN_ERR "zoltrix: port 0x%x already in use\n", io); return -EBUSY; diff --git a/drivers/media/video/arv.c b/drivers/media/video/arv.c index 0d4f9b6..218754b 100644 --- a/drivers/media/video/arv.c +++ b/drivers/media/video/arv.c @@ -270,7 +270,7 @@ static inline void wait_for_vertical_sync(int exp_line) static ssize_t ar_read(struct file *file, char *buf, size_t count, loff_t *ppos) { struct video_device *v = video_devdata(file); - struct ar_device *ar = v->priv; + struct ar_device *ar = video_get_drvdata(v); long ret = ar->frame_bytes; /* return read bytes */ unsigned long arvcr1 = 0; unsigned long flags; @@ -400,7 +400,7 @@ static int ar_do_ioctl(struct inode *inode, struct file *file, unsigned int cmd, void *arg) { struct video_device *dev = video_devdata(file); - struct ar_device *ar = dev->priv; + struct ar_device *ar = video_get_drvdata(dev); DEBUG(1, "ar_ioctl()\n"); switch(cmd) { @@ -626,7 +626,7 @@ static void ar_interrupt(int irq, void *dev) */ static int ar_initialize(struct video_device *dev) { - struct ar_device *ar = dev->priv; + struct ar_device *ar = video_get_drvdata(dev); unsigned long cr = 0; int i,found=0; @@ -733,7 +733,7 @@ static int ar_initialize(struct video_device *dev) void ar_release(struct video_device *vfd) { - struct ar_device *ar = vfd->priv; + struct ar_device *ar = video_get_drvdata(vfd); mutex_lock(&ar->lock); video_device_release(vfd); } @@ -815,7 +815,7 @@ static int __init ar_init(void) return -ENOMEM; } memcpy(ar->vdev, &ar_template, sizeof(ar_template)); - ar->vdev->priv = ar; + video_set_drvdata(ar->vdev, ar); if (vga) { ar->width = AR_WIDTH_VGA; diff --git a/drivers/media/video/cpia.c b/drivers/media/video/cpia.c index c0600fd..b14c59c 100644 --- a/drivers/media/video/cpia.c +++ b/drivers/media/video/cpia.c @@ -3155,7 +3155,7 @@ static void put_cam(struct cpia_camera_ops* ops) static int cpia_open(struct inode *inode, struct file *file) { struct video_device *dev = video_devdata(file); - struct cam_data *cam = dev->priv; + struct cam_data *cam = video_get_drvdata(dev); int err; if (!cam) { @@ -3232,7 +3232,7 @@ static int cpia_open(struct inode *inode, struct file *file) static int cpia_close(struct inode *inode, struct file *file) { struct video_device *dev = file->private_data; - struct cam_data *cam = dev->priv; + struct cam_data *cam = video_get_drvdata(dev); if (cam->ops) { /* Return ownership of /proc/cpia/videoX to root */ @@ -3284,7 +3284,7 @@ static ssize_t cpia_read(struct file *file, char __user *buf, size_t count, loff_t *ppos) { struct video_device *dev = file->private_data; - struct cam_data *cam = dev->priv; + struct cam_data *cam = video_get_drvdata(dev); int err; /* make this _really_ smp and multithread-safe */ @@ -3341,7 +3341,7 @@ static int cpia_do_ioctl(struct inode *inode, struct file *file, unsigned int ioctlnr, void *arg) { struct video_device *dev = file->private_data; - struct cam_data *cam = dev->priv; + struct cam_data *cam = video_get_drvdata(dev); int retval = 0; if (!cam || !cam->ops) @@ -3739,7 +3739,7 @@ static int cpia_mmap(struct file *file, struct vm_area_struct *vma) unsigned long start = vma->vm_start; unsigned long size = vma->vm_end - vma->vm_start; unsigned long page, pos; - struct cam_data *cam = dev->priv; + struct cam_data *cam = video_get_drvdata(dev); int retval; if (!cam || !cam->ops) @@ -3929,7 +3929,7 @@ static void init_camera_struct(struct cam_data *cam, cam->proc_entry = NULL; memcpy(&cam->vdev, &cpia_template, sizeof(cpia_template)); - cam->vdev.priv = cam; + video_set_drvdata(&cam->vdev, cam); cam->curframe = 0; for (i = 0; i < FRAME_NUM; i++) { diff --git a/drivers/media/video/pwc/pwc-if.c b/drivers/media/video/pwc/pwc-if.c index 9aee7cb..ab28389 100644 --- a/drivers/media/video/pwc/pwc-if.c +++ b/drivers/media/video/pwc/pwc-if.c @@ -1112,7 +1112,7 @@ static int pwc_video_open(struct inode *inode, struct file *file) PWC_DEBUG_OPEN(">> video_open called(vdev = 0x%p).\n", vdev); - pdev = (struct pwc_device *)vdev->priv; + pdev = video_get_drvdata(vdev); BUG_ON(!pdev); if (pdev->vopen) { PWC_DEBUG_OPEN("I'm busy, someone is using the device.\n"); @@ -1233,7 +1233,7 @@ static int pwc_video_close(struct inode *inode, struct file *file) PWC_DEBUG_OPEN(">> video_close called(vdev = 0x%p).\n", vdev); lock_kernel(); - pdev = (struct pwc_device *)vdev->priv; + pdev = video_get_drvdata(vdev); if (pdev->vopen == 0) PWC_DEBUG_MODULE("video_close() called on closed device?\n"); @@ -1304,7 +1304,7 @@ static ssize_t pwc_video_read(struct file *file, char __user *buf, vdev, buf, count); if (vdev == NULL) return -EFAULT; - pdev = vdev->priv; + pdev = video_get_drvdata(vdev); if (pdev == NULL) return -EFAULT; @@ -1386,7 +1386,7 @@ static unsigned int pwc_video_poll(struct file *file, poll_table *wait) if (vdev == NULL) return -EFAULT; - pdev = vdev->priv; + pdev = video_get_drvdata(vdev); if (pdev == NULL) return -EFAULT; @@ -1408,7 +1408,7 @@ static int pwc_video_ioctl(struct inode *inode, struct file *file, if (!vdev) goto out; - pdev = vdev->priv; + pdev = video_get_drvdata(vdev); mutex_lock(&pdev->modlock); if (!pdev->unplugged) @@ -1428,7 +1428,7 @@ static int pwc_video_mmap(struct file *file, struct vm_area_struct *vma) int index; PWC_DEBUG_MEMORY(">> %s\n", __func__); - pdev = vdev->priv; + pdev = video_get_drvdata(vdev); size = vma->vm_end - vma->vm_start; start = vma->vm_start; diff --git a/drivers/media/video/pwc/pwc-v4l.c b/drivers/media/video/pwc/pwc-v4l.c index 1742889..76a1376 100644 --- a/drivers/media/video/pwc/pwc-v4l.c +++ b/drivers/media/video/pwc/pwc-v4l.c @@ -346,7 +346,7 @@ int pwc_video_do_ioctl(struct inode *inode, struct file *file, if (vdev == NULL) return -EFAULT; - pdev = vdev->priv; + pdev = video_get_drvdata(vdev); if (pdev == NULL) return -EFAULT; diff --git a/drivers/media/video/s2255drv.c b/drivers/media/video/s2255drv.c index af19bb3..ea40f4c 100644 --- a/drivers/media/video/s2255drv.c +++ b/drivers/media/video/s2255drv.c @@ -1800,7 +1800,7 @@ static int s2255_probe_v4l(struct s2255_dev *dev) ret = video_register_device(dev->vdev[i], VFL_TYPE_GRABBER, cur_nr + i); - dev->vdev[i]->priv = dev; + video_set_drvdata(dev->vdev[i], dev); if (ret != 0) { dev_err(&dev->udev->dev, diff --git a/drivers/media/video/saa5246a.c b/drivers/media/video/saa5246a.c index 5f5aa20..0178b49 100644 --- a/drivers/media/video/saa5246a.c +++ b/drivers/media/video/saa5246a.c @@ -117,7 +117,7 @@ static int saa5246a_attach(struct i2c_adapter *adap, int addr, int kind) memset(t->pgbuf[pgbuf], ' ', sizeof(t->pgbuf[0])); t->is_searching[pgbuf] = false; } - vd->priv=t; + video_set_drvdata(vd, t); /* @@ -151,7 +151,7 @@ static int saa5246a_detach(struct i2c_client *client) struct video_device *vd = i2c_get_clientdata(client); i2c_detach_client(client); video_unregister_device(vd); - kfree(vd->priv); + kfree(video_get_drvdata(vd)); kfree(client); return 0; } @@ -582,7 +582,8 @@ static int do_saa5246a_ioctl(struct inode *inode, struct file *file, unsigned int cmd, void *arg) { struct video_device *vd = video_devdata(file); - struct saa5246a_device *t=vd->priv; + struct saa5246a_device *t = video_get_drvdata(vd); + switch(cmd) { case VTXIOCGETINFO: @@ -723,7 +724,7 @@ static int saa5246a_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg) { struct video_device *vd = video_devdata(file); - struct saa5246a_device *t = vd->priv; + struct saa5246a_device *t = video_get_drvdata(vd); int err; cmd = vtx_fix_command(cmd); @@ -736,7 +737,7 @@ static int saa5246a_ioctl(struct inode *inode, struct file *file, static int saa5246a_open(struct inode *inode, struct file *file) { struct video_device *vd = video_devdata(file); - struct saa5246a_device *t = vd->priv; + struct saa5246a_device *t = video_get_drvdata(vd); if (t->client == NULL) return -ENODEV; @@ -779,7 +780,7 @@ static int saa5246a_open(struct inode *inode, struct file *file) static int saa5246a_release(struct inode *inode, struct file *file) { struct video_device *vd = video_devdata(file); - struct saa5246a_device *t = vd->priv; + struct saa5246a_device *t = video_get_drvdata(vd); /* Stop all acquisition circuits. */ i2c_senddata(t, SAA5246A_REGISTER_R1, diff --git a/drivers/media/video/saa5249.c b/drivers/media/video/saa5249.c index 225117c..c784715 100644 --- a/drivers/media/video/saa5249.c +++ b/drivers/media/video/saa5249.c @@ -186,7 +186,7 @@ static int saa5249_attach(struct i2c_adapter *adap, int addr, int kind) t->vdau[pgbuf].stopped = true; t->is_searching[pgbuf] = false; } - vd->priv=t; + video_set_drvdata(vd, t); /* @@ -221,7 +221,7 @@ static int saa5249_detach(struct i2c_client *client) struct video_device *vd = i2c_get_clientdata(client); i2c_detach_client(client); video_unregister_device(vd); - kfree(vd->priv); + kfree(video_get_drvdata(vd)); kfree(vd); kfree(client); return 0; @@ -320,7 +320,7 @@ static int do_saa5249_ioctl(struct inode *inode, struct file *file, { static int virtual_mode = false; struct video_device *vd = video_devdata(file); - struct saa5249_device *t=vd->priv; + struct saa5249_device *t = video_get_drvdata(vd); switch(cmd) { @@ -619,7 +619,7 @@ static int saa5249_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg) { struct video_device *vd = video_devdata(file); - struct saa5249_device *t=vd->priv; + struct saa5249_device *t = video_get_drvdata(vd); int err; cmd = vtx_fix_command(cmd); @@ -632,7 +632,7 @@ static int saa5249_ioctl(struct inode *inode, struct file *file, static int saa5249_open(struct inode *inode, struct file *file) { struct video_device *vd = video_devdata(file); - struct saa5249_device *t = vd->priv; + struct saa5249_device *t = video_get_drvdata(vd); int pgbuf; if (t->client == NULL) @@ -670,7 +670,7 @@ static int saa5249_open(struct inode *inode, struct file *file) static int saa5249_release(struct inode *inode, struct file *file) { struct video_device *vd = video_devdata(file); - struct saa5249_device *t = vd->priv; + struct saa5249_device *t = video_get_drvdata(vd); i2c_senddata(t, 1, 0x20, -1); /* Turn off CCT */ i2c_senddata(t, 5, 3, 3, -1); /* Turn off TV-display */ diff --git a/drivers/media/video/stk-webcam.c b/drivers/media/video/stk-webcam.c index 6b1ef5d..8dda568 100644 --- a/drivers/media/video/stk-webcam.c +++ b/drivers/media/video/stk-webcam.c @@ -72,7 +72,7 @@ static void stk_camera_cleanup(struct kref *kref) STK_INFO("Syntek USB2.0 Camera release resources" " video device /dev/video%d\n", dev->vdev.minor); video_unregister_device(&dev->vdev); - dev->vdev.priv = NULL; + video_set_drvdata(&dev->vdev, NULL); if (dev->sio_bufs != NULL || dev->isobufs != NULL) STK_ERROR("We are leaking memory\n"); @@ -1379,7 +1379,7 @@ static int stk_register_video_device(struct stk_camera *dev) dev->vdev = stk_v4l_data; dev->vdev.debug = debug; dev->vdev.parent = &dev->interface->dev; - dev->vdev.priv = dev; + video_set_drvdata(&dev->vdev, dev); err = video_register_device(&dev->vdev, VFL_TYPE_GRABBER, -1); if (err) STK_ERROR("v4l registration failed\n"); diff --git a/drivers/media/video/usbvideo/vicam.c b/drivers/media/video/usbvideo/vicam.c index d772825..1ffcc39 100644 --- a/drivers/media/video/usbvideo/vicam.c +++ b/drivers/media/video/usbvideo/vicam.c @@ -473,8 +473,8 @@ static int vicam_open(struct inode *inode, struct file *file) { struct video_device *dev = video_devdata(file); - struct vicam_camera *cam = - (struct vicam_camera *) dev->priv; + struct vicam_camera *cam = video_get_drvdata(dev); + DBG("open\n"); if (!cam) { @@ -866,9 +866,8 @@ vicam_probe( struct usb_interface *intf, const struct usb_device_id *id) mutex_init(&cam->cam_lock); - memcpy(&cam->vdev, &vicam_template, - sizeof (vicam_template)); - cam->vdev.priv = cam; // sort of a reverse mapping for those functions that get vdev only + memcpy(&cam->vdev, &vicam_template, sizeof(vicam_template)); + video_set_drvdata(&cam->vdev, cam); cam->udev = dev; cam->bulkEndpoint = bulkEndpoint; diff --git a/drivers/media/video/w9966.c b/drivers/media/video/w9966.c index e358011..14ebb15 100644 --- a/drivers/media/video/w9966.c +++ b/drivers/media/video/w9966.c @@ -188,7 +188,7 @@ static ssize_t w9966_v4l_read(struct file *file, char __user *buf, static int w9966_exclusive_open(struct inode *inode, struct file *file) { struct video_device *vdev = video_devdata(file); - struct w9966_dev *cam = vdev->priv; + struct w9966_dev *cam = video_get_drvdata(vdev); return test_and_set_bit(0, &cam->in_use) ? -EBUSY : 0; } @@ -196,7 +196,7 @@ static int w9966_exclusive_open(struct inode *inode, struct file *file) static int w9966_exclusive_release(struct inode *inode, struct file *file) { struct video_device *vdev = video_devdata(file); - struct w9966_dev *cam = vdev->priv; + struct w9966_dev *cam = video_get_drvdata(vdev); clear_bit(0, &cam->in_use); return 0; @@ -351,7 +351,7 @@ static int w9966_init(struct w9966_dev* cam, struct parport* port) // Fill in the video_device struct and register us to v4l memcpy(&cam->vdev, &w9966_template, sizeof(struct video_device)); - cam->vdev.priv = cam; + video_set_drvdata(&cam->vdev, cam); if (video_register_device(&cam->vdev, VFL_TYPE_GRABBER, video_nr) < 0) return -1; @@ -733,7 +733,7 @@ static int w9966_v4l_do_ioctl(struct inode *inode, struct file *file, unsigned int cmd, void *arg) { struct video_device *vdev = video_devdata(file); - struct w9966_dev *cam = vdev->priv; + struct w9966_dev *cam = video_get_drvdata(vdev); switch(cmd) { @@ -892,7 +892,7 @@ static ssize_t w9966_v4l_read(struct file *file, char __user *buf, size_t count, loff_t *ppos) { struct video_device *vdev = video_devdata(file); - struct w9966_dev *cam = vdev->priv; + struct w9966_dev *cam = video_get_drvdata(vdev); unsigned char addr = 0xa0; // ECP, read, CCD-transfer, 00000 unsigned char __user *dest = (unsigned char __user *)buf; unsigned long dleft = count; diff --git a/include/media/v4l2-dev.h b/include/media/v4l2-dev.h index 23df009..1d4df57 100644 --- a/include/media/v4l2-dev.h +++ b/include/media/v4l2-dev.h @@ -69,14 +69,6 @@ struct video_device /* ioctl callbacks */ const struct v4l2_ioctl_ops *ioctl_ops; - -#ifdef OBSOLETE_DEVDATA /* to be removed soon */ - /* dev->driver_data will be used instead some day. - * Use the video_{get|set}_drvdata() helper functions, - * so the switch over will be transparent for you. - * Or use {pci|usb}_{get|set}_drvdata() directly. */ - void *priv; -#endif }; /* Class-dev to video-device */ @@ -98,18 +90,18 @@ void video_device_release(struct video_device *vfd); a dubious construction at best. */ void video_device_release_empty(struct video_device *vfd); -#ifdef OBSOLETE_DEVDATA /* to be removed soon */ /* helper functions to access driver private data. */ static inline void *video_get_drvdata(struct video_device *dev) { - return dev->priv; + return dev_get_drvdata(&dev->dev); } static inline void video_set_drvdata(struct video_device *dev, void *data) { - dev->priv = data; + dev_set_drvdata(&dev->dev, data); } +#ifdef OBSOLETE_DEVDATA /* to be removed soon */ /* Obsolete stuff - Still needed for radio devices and obsolete drivers */ extern struct video_device* video_devdata(struct file*); #endif -- cgit v0.10.2 From bfa8a273bb91078ea193ab94c717889928f3b925 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Sat, 23 Aug 2008 07:48:38 -0300 Subject: V4L/DVB (8787): v4l2-dev: cleanups and add video_drvdata helper function Cleanup v4l2-dev.[ch], add/improve comments and add a new helper function: video_drvdata() that can get the private driver data from a file struct. Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/v4l2-dev.c b/drivers/media/video/v4l2-dev.c index ff219df..1ec0a1a 100644 --- a/drivers/media/video/v4l2-dev.c +++ b/drivers/media/video/v4l2-dev.c @@ -42,6 +42,7 @@ static ssize_t show_index(struct device *cd, struct device_attribute *attr, char *buf) { struct video_device *vfd = container_of(cd, struct video_device, dev); + return sprintf(buf, "%i\n", vfd->index); } @@ -49,6 +50,7 @@ static ssize_t show_name(struct device *cd, struct device_attribute *attr, char *buf) { struct video_device *vfd = container_of(cd, struct video_device, dev); + return sprintf(buf, "%.*s\n", (int)sizeof(vfd->name), vfd->name); } @@ -60,10 +62,7 @@ static struct device_attribute video_device_attrs[] = { struct video_device *video_device_alloc(void) { - struct video_device *vfd; - - vfd = kzalloc(sizeof(*vfd), GFP_KERNEL); - return vfd; + return kzalloc(sizeof(struct video_device), GFP_KERNEL); } EXPORT_SYMBOL(video_device_alloc); @@ -263,7 +262,7 @@ int video_register_device_index(struct video_device *vfd, int type, int nr, /* pick a minor number */ mutex_lock(&videodev_lock); - if (nr >= 0 && nr < end-base) { + if (nr >= 0 && nr < end-base) { /* use the one the driver asked for */ i = base + nr; if (NULL != video_device[i]) { @@ -295,7 +294,7 @@ int video_register_device_index(struct video_device *vfd, int type, int nr, } /* sysfs class */ - memset(&vfd->dev, 0x00, sizeof(vfd->dev)); + memset(&vfd->dev, 0, sizeof(vfd->dev)); vfd->dev.class = &video_class; vfd->dev.devt = MKDEV(VIDEO_MAJOR, vfd->minor); if (vfd->parent) @@ -312,8 +311,8 @@ int video_register_device_index(struct video_device *vfd, int type, int nr, fail_minor: mutex_lock(&videodev_lock); video_device[vfd->minor] = NULL; - vfd->minor = -1; mutex_unlock(&videodev_lock); + vfd->minor = -1; return ret; } EXPORT_SYMBOL(video_register_device_index); diff --git a/include/media/v4l2-dev.h b/include/media/v4l2-dev.h index 1d4df57..fb92e3d 100644 --- a/include/media/v4l2-dev.h +++ b/include/media/v4l2-dev.h @@ -9,16 +9,14 @@ #ifndef _V4L2_DEV_H #define _V4L2_DEV_H -#define OBSOLETE_DEVDATA 1 /* to be removed soon */ - #include #include #include #include -#include /* need __user */ #include #define VIDEO_MAJOR 81 + /* Minor device allocation */ #define MINOR_VFL_TYPE_GRABBER_MIN 0 #define MINOR_VFL_TYPE_GRABBER_MAX 63 @@ -71,20 +69,25 @@ struct video_device const struct v4l2_ioctl_ops *ioctl_ops; }; -/* Class-dev to video-device */ +/* dev to video-device */ #define to_video_device(cd) container_of(cd, struct video_device, dev) -/* Version 2 functions */ +/* Register and unregister devices. Note that if video_register_device fails, + the release() callback of the video_device structure is *not* called, so + the caller is responsible for freeing any data. Usually that means that + you call video_device_release() on failure. */ int __must_check video_register_device(struct video_device *vfd, int type, int nr); -int __must_check video_register_device_index(struct video_device *vfd, int type, int nr, - int index); -void video_unregister_device(struct video_device *); +int __must_check video_register_device_index(struct video_device *vfd, + int type, int nr, int index); +void video_unregister_device(struct video_device *vfd); -/* helper functions to alloc / release struct video_device, the - later can be used for video_device->release() */ +/* helper functions to alloc/release struct video_device, the + latter can also be used for video_device->release(). */ struct video_device * __must_check video_device_alloc(void); + /* this release function frees the vfd pointer */ void video_device_release(struct video_device *vfd); + /* this release function does nothing, use when the video_device is a static global struct. Note that having a static video_device is a dubious construction at best. */ @@ -101,9 +104,13 @@ static inline void video_set_drvdata(struct video_device *dev, void *data) dev_set_drvdata(&dev->dev, data); } -#ifdef OBSOLETE_DEVDATA /* to be removed soon */ -/* Obsolete stuff - Still needed for radio devices and obsolete drivers */ -extern struct video_device* video_devdata(struct file*); -#endif +struct video_device *video_devdata(struct file *file); + +/* Combine video_get_drvdata and video_devdata as this is + used very often. */ +static inline void *video_drvdata(struct file *file) +{ + return video_get_drvdata(video_devdata(file)); +} #endif /* _V4L2_DEV_H */ -- cgit v0.10.2 From c170ecf434bceb0e188b14a6deb3bfa3ec9ef699 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Sat, 23 Aug 2008 08:32:09 -0300 Subject: V4L/DVB (8788): v4l: replace video_get_drvdata(video_devdata(filp)) with video_drvdata(filp) Use the new video_drvdata(filp) function where it is safe to do so. Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/radio/dsbr100.c b/drivers/media/radio/dsbr100.c index 3a4eb44..0f06e6f 100644 --- a/drivers/media/radio/dsbr100.c +++ b/drivers/media/radio/dsbr100.c @@ -274,7 +274,7 @@ static int vidioc_querycap(struct file *file, void *priv, static int vidioc_g_tuner(struct file *file, void *priv, struct v4l2_tuner *v) { - struct dsbr100_device *radio = video_get_drvdata(video_devdata(file)); + struct dsbr100_device *radio = video_drvdata(file); if (v->index > 0) return -EINVAL; @@ -306,7 +306,7 @@ static int vidioc_s_tuner(struct file *file, void *priv, static int vidioc_s_frequency(struct file *file, void *priv, struct v4l2_frequency *f) { - struct dsbr100_device *radio = video_get_drvdata(video_devdata(file)); + struct dsbr100_device *radio = video_drvdata(file); radio->curfreq = f->frequency; if (dsbr100_setfreq(radio, radio->curfreq)==-1) @@ -317,7 +317,7 @@ static int vidioc_s_frequency(struct file *file, void *priv, static int vidioc_g_frequency(struct file *file, void *priv, struct v4l2_frequency *f) { - struct dsbr100_device *radio = video_get_drvdata(video_devdata(file)); + struct dsbr100_device *radio = video_drvdata(file); f->type = V4L2_TUNER_RADIO; f->frequency = radio->curfreq; @@ -342,7 +342,7 @@ static int vidioc_queryctrl(struct file *file, void *priv, static int vidioc_g_ctrl(struct file *file, void *priv, struct v4l2_control *ctrl) { - struct dsbr100_device *radio = video_get_drvdata(video_devdata(file)); + struct dsbr100_device *radio = video_drvdata(file); switch (ctrl->id) { case V4L2_CID_AUDIO_MUTE: @@ -355,7 +355,7 @@ static int vidioc_g_ctrl(struct file *file, void *priv, static int vidioc_s_ctrl(struct file *file, void *priv, struct v4l2_control *ctrl) { - struct dsbr100_device *radio = video_get_drvdata(video_devdata(file)); + struct dsbr100_device *radio = video_drvdata(file); switch (ctrl->id) { case V4L2_CID_AUDIO_MUTE: @@ -405,7 +405,7 @@ static int vidioc_s_audio(struct file *file, void *priv, static int usb_dsbr100_open(struct inode *inode, struct file *file) { - struct dsbr100_device *radio=video_get_drvdata(video_devdata(file)); + struct dsbr100_device *radio = video_drvdata(file); lock_kernel(); radio->users = 1; @@ -424,7 +424,7 @@ static int usb_dsbr100_open(struct inode *inode, struct file *file) static int usb_dsbr100_close(struct inode *inode, struct file *file) { - struct dsbr100_device *radio=video_get_drvdata(video_devdata(file)); + struct dsbr100_device *radio = video_drvdata(file); if (!radio) return -ENODEV; diff --git a/drivers/media/radio/radio-aimslab.c b/drivers/media/radio/radio-aimslab.c index 62cc687..9305e95 100644 --- a/drivers/media/radio/radio-aimslab.c +++ b/drivers/media/radio/radio-aimslab.c @@ -246,8 +246,7 @@ static int vidioc_querycap(struct file *file, void *priv, static int vidioc_g_tuner(struct file *file, void *priv, struct v4l2_tuner *v) { - struct video_device *dev = video_devdata(file); - struct rt_device *rt = video_get_drvdata(dev); + struct rt_device *rt = video_drvdata(file); if (v->index > 0) return -EINVAL; @@ -274,8 +273,7 @@ static int vidioc_s_tuner(struct file *file, void *priv, static int vidioc_s_frequency(struct file *file, void *priv, struct v4l2_frequency *f) { - struct video_device *dev = video_devdata(file); - struct rt_device *rt = video_get_drvdata(dev); + struct rt_device *rt = video_drvdata(file); rt->curfreq = f->frequency; rt_setfreq(rt, rt->curfreq); @@ -285,8 +283,7 @@ static int vidioc_s_frequency(struct file *file, void *priv, static int vidioc_g_frequency(struct file *file, void *priv, struct v4l2_frequency *f) { - struct video_device *dev = video_devdata(file); - struct rt_device *rt = video_get_drvdata(dev); + struct rt_device *rt = video_drvdata(file); f->type = V4L2_TUNER_RADIO; f->frequency = rt->curfreq; @@ -311,8 +308,7 @@ static int vidioc_queryctrl(struct file *file, void *priv, static int vidioc_g_ctrl(struct file *file, void *priv, struct v4l2_control *ctrl) { - struct video_device *dev = video_devdata(file); - struct rt_device *rt = video_get_drvdata(dev); + struct rt_device *rt = video_drvdata(file); switch (ctrl->id) { case V4L2_CID_AUDIO_MUTE: @@ -328,8 +324,7 @@ static int vidioc_g_ctrl(struct file *file, void *priv, static int vidioc_s_ctrl(struct file *file, void *priv, struct v4l2_control *ctrl) { - struct video_device *dev = video_devdata(file); - struct rt_device *rt = video_get_drvdata(dev); + struct rt_device *rt = video_drvdata(file); switch (ctrl->id) { case V4L2_CID_AUDIO_MUTE: diff --git a/drivers/media/radio/radio-aztech.c b/drivers/media/radio/radio-aztech.c index 5dd5e34..d784895 100644 --- a/drivers/media/radio/radio-aztech.c +++ b/drivers/media/radio/radio-aztech.c @@ -196,8 +196,7 @@ static int vidioc_querycap (struct file *file, void *priv, static int vidioc_g_tuner (struct file *file, void *priv, struct v4l2_tuner *v) { - struct video_device *dev = video_devdata(file); - struct az_device *az = video_get_drvdata(dev); + struct az_device *az = video_drvdata(file); if (v->index > 0) return -EINVAL; @@ -265,8 +264,7 @@ static int vidioc_s_audio (struct file *file, void *priv, static int vidioc_s_frequency (struct file *file, void *priv, struct v4l2_frequency *f) { - struct video_device *dev = video_devdata(file); - struct az_device *az = video_get_drvdata(dev); + struct az_device *az = video_drvdata(file); az->curfreq = f->frequency; az_setfreq(az, az->curfreq); @@ -276,8 +274,7 @@ static int vidioc_s_frequency (struct file *file, void *priv, static int vidioc_g_frequency (struct file *file, void *priv, struct v4l2_frequency *f) { - struct video_device *dev = video_devdata(file); - struct az_device *az = video_get_drvdata(dev); + struct az_device *az = video_drvdata(file); f->type = V4L2_TUNER_RADIO; f->frequency = az->curfreq; @@ -303,8 +300,7 @@ static int vidioc_queryctrl (struct file *file, void *priv, static int vidioc_g_ctrl (struct file *file, void *priv, struct v4l2_control *ctrl) { - struct video_device *dev = video_devdata(file); - struct az_device *az = video_get_drvdata(dev); + struct az_device *az = video_drvdata(file); switch (ctrl->id) { case V4L2_CID_AUDIO_MUTE: @@ -323,8 +319,7 @@ static int vidioc_g_ctrl (struct file *file, void *priv, static int vidioc_s_ctrl (struct file *file, void *priv, struct v4l2_control *ctrl) { - struct video_device *dev = video_devdata(file); - struct az_device *az = video_get_drvdata(dev); + struct az_device *az = video_drvdata(file); switch (ctrl->id) { case V4L2_CID_AUDIO_MUTE: diff --git a/drivers/media/radio/radio-gemtek-pci.c b/drivers/media/radio/radio-gemtek-pci.c index 1f57f73..e15bee6 100644 --- a/drivers/media/radio/radio-gemtek-pci.c +++ b/drivers/media/radio/radio-gemtek-pci.c @@ -204,8 +204,7 @@ static int vidioc_querycap(struct file *file, void *priv, static int vidioc_g_tuner(struct file *file, void *priv, struct v4l2_tuner *v) { - struct video_device *dev = video_devdata(file); - struct gemtek_pci_card *card = video_get_drvdata(dev); + struct gemtek_pci_card *card = video_drvdata(file); if (v->index > 0) return -EINVAL; @@ -232,8 +231,7 @@ static int vidioc_s_tuner(struct file *file, void *priv, static int vidioc_s_frequency(struct file *file, void *priv, struct v4l2_frequency *f) { - struct video_device *dev = video_devdata(file); - struct gemtek_pci_card *card = video_get_drvdata(dev); + struct gemtek_pci_card *card = video_drvdata(file); if ( (f->frequency < GEMTEK_PCI_RANGE_LOW) || (f->frequency > GEMTEK_PCI_RANGE_HIGH) ) @@ -247,8 +245,7 @@ static int vidioc_s_frequency(struct file *file, void *priv, static int vidioc_g_frequency(struct file *file, void *priv, struct v4l2_frequency *f) { - struct video_device *dev = video_devdata(file); - struct gemtek_pci_card *card = video_get_drvdata(dev); + struct gemtek_pci_card *card = video_drvdata(file); f->type = V4L2_TUNER_RADIO; f->frequency = card->current_frequency; @@ -272,8 +269,7 @@ static int vidioc_queryctrl(struct file *file, void *priv, static int vidioc_g_ctrl(struct file *file, void *priv, struct v4l2_control *ctrl) { - struct video_device *dev = video_devdata(file); - struct gemtek_pci_card *card = video_get_drvdata(dev); + struct gemtek_pci_card *card = video_drvdata(file); switch (ctrl->id) { case V4L2_CID_AUDIO_MUTE: @@ -292,8 +288,7 @@ static int vidioc_g_ctrl(struct file *file, void *priv, static int vidioc_s_ctrl(struct file *file, void *priv, struct v4l2_control *ctrl) { - struct video_device *dev = video_devdata(file); - struct gemtek_pci_card *card = video_get_drvdata(dev); + struct gemtek_pci_card *card = video_drvdata(file); switch (ctrl->id) { case V4L2_CID_AUDIO_MUTE: diff --git a/drivers/media/radio/radio-gemtek.c b/drivers/media/radio/radio-gemtek.c index 2c4c15e..d131a5d 100644 --- a/drivers/media/radio/radio-gemtek.c +++ b/drivers/media/radio/radio-gemtek.c @@ -459,8 +459,7 @@ static int vidioc_s_tuner(struct file *file, void *priv, struct v4l2_tuner *v) static int vidioc_s_frequency(struct file *file, void *priv, struct v4l2_frequency *f) { - struct video_device *dev = video_devdata(file); - struct gemtek_device *rt = video_get_drvdata(dev); + struct gemtek_device *rt = video_drvdata(file); gemtek_setfreq(rt, f->frequency); @@ -470,8 +469,7 @@ static int vidioc_s_frequency(struct file *file, void *priv, static int vidioc_g_frequency(struct file *file, void *priv, struct v4l2_frequency *f) { - struct video_device *dev = video_devdata(file); - struct gemtek_device *rt = video_get_drvdata(dev); + struct gemtek_device *rt = video_drvdata(file); f->type = V4L2_TUNER_RADIO; f->frequency = rt->lastfreq; @@ -495,8 +493,7 @@ static int vidioc_queryctrl(struct file *file, void *priv, static int vidioc_g_ctrl(struct file *file, void *priv, struct v4l2_control *ctrl) { - struct video_device *dev = video_devdata(file); - struct gemtek_device *rt = video_get_drvdata(dev); + struct gemtek_device *rt = video_drvdata(file); switch (ctrl->id) { case V4L2_CID_AUDIO_MUTE: @@ -515,8 +512,7 @@ static int vidioc_g_ctrl(struct file *file, void *priv, static int vidioc_s_ctrl(struct file *file, void *priv, struct v4l2_control *ctrl) { - struct video_device *dev = video_devdata(file); - struct gemtek_device *rt = video_get_drvdata(dev); + struct gemtek_device *rt = video_drvdata(file); switch (ctrl->id) { case V4L2_CID_AUDIO_MUTE: diff --git a/drivers/media/radio/radio-maestro.c b/drivers/media/radio/radio-maestro.c index 182b433..4bf4d00 100644 --- a/drivers/media/radio/radio-maestro.c +++ b/drivers/media/radio/radio-maestro.c @@ -210,8 +210,7 @@ static int vidioc_querycap(struct file *file, void *priv, static int vidioc_g_tuner(struct file *file, void *priv, struct v4l2_tuner *v) { - struct video_device *dev = video_devdata(file); - struct radio_device *card = video_get_drvdata(dev); + struct radio_device *card = video_drvdata(file); if (v->index > 0) return -EINVAL; @@ -243,8 +242,7 @@ static int vidioc_s_tuner(struct file *file, void *priv, static int vidioc_s_frequency(struct file *file, void *priv, struct v4l2_frequency *f) { - struct video_device *dev = video_devdata(file); - struct radio_device *card = video_get_drvdata(dev); + struct radio_device *card = video_drvdata(file); if (f->frequency < FREQ_LO || f->frequency > FREQ_HI) return -EINVAL; @@ -255,8 +253,7 @@ static int vidioc_s_frequency(struct file *file, void *priv, static int vidioc_g_frequency(struct file *file, void *priv, struct v4l2_frequency *f) { - struct video_device *dev = video_devdata(file); - struct radio_device *card = video_get_drvdata(dev); + struct radio_device *card = video_drvdata(file); f->type = V4L2_TUNER_RADIO; f->frequency = BITS2FREQ(radio_bits_get(card)); @@ -281,8 +278,7 @@ static int vidioc_queryctrl(struct file *file, void *priv, static int vidioc_g_ctrl(struct file *file, void *priv, struct v4l2_control *ctrl) { - struct video_device *dev = video_devdata(file); - struct radio_device *card = video_get_drvdata(dev); + struct radio_device *card = video_drvdata(file); switch (ctrl->id) { case V4L2_CID_AUDIO_MUTE: @@ -295,8 +291,7 @@ static int vidioc_g_ctrl(struct file *file, void *priv, static int vidioc_s_ctrl(struct file *file, void *priv, struct v4l2_control *ctrl) { - struct video_device *dev = video_devdata(file); - struct radio_device *card = video_get_drvdata(dev); + struct radio_device *card = video_drvdata(file); register u16 io = card->io; register u16 omask = inw(io + IO_MASK); diff --git a/drivers/media/radio/radio-maxiradio.c b/drivers/media/radio/radio-maxiradio.c index 9bf2acf..c777a17 100644 --- a/drivers/media/radio/radio-maxiradio.c +++ b/drivers/media/radio/radio-maxiradio.c @@ -231,8 +231,7 @@ static int vidioc_querycap (struct file *file, void *priv, static int vidioc_g_tuner (struct file *file, void *priv, struct v4l2_tuner *v) { - struct video_device *dev = video_devdata(file); - struct radio_device *card = video_get_drvdata(dev); + struct radio_device *card = video_drvdata(file); if (v->index > 0) return -EINVAL; @@ -302,8 +301,7 @@ static int vidioc_s_audio (struct file *file, void *priv, static int vidioc_s_frequency (struct file *file, void *priv, struct v4l2_frequency *f) { - struct video_device *dev = video_devdata(file); - struct radio_device *card = video_get_drvdata(dev); + struct radio_device *card = video_drvdata(file); if (f->frequency < FREQ_LO || f->frequency > FREQ_HI) { dprintk(1, "radio freq (%d.%02d MHz) out of range (%d-%d)\n", @@ -324,8 +322,7 @@ static int vidioc_s_frequency (struct file *file, void *priv, static int vidioc_g_frequency (struct file *file, void *priv, struct v4l2_frequency *f) { - struct video_device *dev = video_devdata(file); - struct radio_device *card = video_get_drvdata(dev); + struct radio_device *card = video_drvdata(file); f->type = V4L2_TUNER_RADIO; f->frequency = card->freq; @@ -355,8 +352,7 @@ static int vidioc_queryctrl (struct file *file, void *priv, static int vidioc_g_ctrl (struct file *file, void *priv, struct v4l2_control *ctrl) { - struct video_device *dev = video_devdata(file); - struct radio_device *card = video_get_drvdata(dev); + struct radio_device *card = video_drvdata(file); switch (ctrl->id) { case V4L2_CID_AUDIO_MUTE: @@ -370,8 +366,7 @@ static int vidioc_g_ctrl (struct file *file, void *priv, static int vidioc_s_ctrl (struct file *file, void *priv, struct v4l2_control *ctrl) { - struct video_device *dev = video_devdata(file); - struct radio_device *card = video_get_drvdata(dev); + struct radio_device *card = video_drvdata(file); switch (ctrl->id) { case V4L2_CID_AUDIO_MUTE: diff --git a/drivers/media/radio/radio-rtrack2.c b/drivers/media/radio/radio-rtrack2.c index 4234f7e..a670797 100644 --- a/drivers/media/radio/radio-rtrack2.c +++ b/drivers/media/radio/radio-rtrack2.c @@ -154,8 +154,7 @@ static int rt_getsigstr(struct rt_device *dev) static int vidioc_g_tuner(struct file *file, void *priv, struct v4l2_tuner *v) { - struct video_device *dev = video_devdata(file); - struct rt_device *rt = video_get_drvdata(dev); + struct rt_device *rt = video_drvdata(file); if (v->index > 0) return -EINVAL; @@ -174,8 +173,7 @@ static int vidioc_g_tuner(struct file *file, void *priv, static int vidioc_s_frequency(struct file *file, void *priv, struct v4l2_frequency *f) { - struct video_device *dev = video_devdata(file); - struct rt_device *rt = video_get_drvdata(dev); + struct rt_device *rt = video_drvdata(file); rt->curfreq = f->frequency; rt_setfreq(rt, rt->curfreq); @@ -185,8 +183,7 @@ static int vidioc_s_frequency(struct file *file, void *priv, static int vidioc_g_frequency(struct file *file, void *priv, struct v4l2_frequency *f) { - struct video_device *dev = video_devdata(file); - struct rt_device *rt = video_get_drvdata(dev); + struct rt_device *rt = video_drvdata(file); f->type = V4L2_TUNER_RADIO; f->frequency = rt->curfreq; @@ -211,8 +208,7 @@ static int vidioc_queryctrl(struct file *file, void *priv, static int vidioc_g_ctrl(struct file *file, void *priv, struct v4l2_control *ctrl) { - struct video_device *dev = video_devdata(file); - struct rt_device *rt = video_get_drvdata(dev); + struct rt_device *rt = video_drvdata(file); switch (ctrl->id) { case V4L2_CID_AUDIO_MUTE: @@ -231,8 +227,7 @@ static int vidioc_g_ctrl(struct file *file, void *priv, static int vidioc_s_ctrl(struct file *file, void *priv, struct v4l2_control *ctrl) { - struct video_device *dev = video_devdata(file); - struct rt_device *rt = video_get_drvdata(dev); + struct rt_device *rt = video_drvdata(file); switch (ctrl->id) { case V4L2_CID_AUDIO_MUTE: diff --git a/drivers/media/radio/radio-sf16fmi.c b/drivers/media/radio/radio-sf16fmi.c index 810c366..329c90b 100644 --- a/drivers/media/radio/radio-sf16fmi.c +++ b/drivers/media/radio/radio-sf16fmi.c @@ -147,8 +147,7 @@ static int vidioc_g_tuner(struct file *file, void *priv, struct v4l2_tuner *v) { int mult; - struct video_device *dev = video_devdata(file); - struct fmi_device *fmi = video_get_drvdata(dev); + struct fmi_device *fmi = video_drvdata(file); if (v->index > 0) return -EINVAL; @@ -176,8 +175,7 @@ static int vidioc_s_tuner(struct file *file, void *priv, static int vidioc_s_frequency(struct file *file, void *priv, struct v4l2_frequency *f) { - struct video_device *dev = video_devdata(file); - struct fmi_device *fmi = video_get_drvdata(dev); + struct fmi_device *fmi = video_drvdata(file); if (!(fmi->flags & V4L2_TUNER_CAP_LOW)) f->frequency *= 1000; @@ -194,8 +192,7 @@ static int vidioc_s_frequency(struct file *file, void *priv, static int vidioc_g_frequency(struct file *file, void *priv, struct v4l2_frequency *f) { - struct video_device *dev = video_devdata(file); - struct fmi_device *fmi = video_get_drvdata(dev); + struct fmi_device *fmi = video_drvdata(file); f->type = V4L2_TUNER_RADIO; f->frequency = fmi->curfreq; @@ -222,8 +219,7 @@ static int vidioc_queryctrl(struct file *file, void *priv, static int vidioc_g_ctrl(struct file *file, void *priv, struct v4l2_control *ctrl) { - struct video_device *dev = video_devdata(file); - struct fmi_device *fmi = video_get_drvdata(dev); + struct fmi_device *fmi = video_drvdata(file); switch (ctrl->id) { case V4L2_CID_AUDIO_MUTE: @@ -236,8 +232,7 @@ static int vidioc_g_ctrl(struct file *file, void *priv, static int vidioc_s_ctrl(struct file *file, void *priv, struct v4l2_control *ctrl) { - struct video_device *dev = video_devdata(file); - struct fmi_device *fmi = video_get_drvdata(dev); + struct fmi_device *fmi = video_drvdata(file); switch (ctrl->id) { case V4L2_CID_AUDIO_MUTE: diff --git a/drivers/media/radio/radio-sf16fmr2.c b/drivers/media/radio/radio-sf16fmr2.c index 9f82315..b1f47c3 100644 --- a/drivers/media/radio/radio-sf16fmr2.c +++ b/drivers/media/radio/radio-sf16fmr2.c @@ -230,8 +230,7 @@ static int vidioc_g_tuner(struct file *file, void *priv, struct v4l2_tuner *v) { int mult; - struct video_device *dev = video_devdata(file); - struct fmr2_device *fmr2 = video_get_drvdata(dev); + struct fmr2_device *fmr2 = video_drvdata(file); if (v->index > 0) return -EINVAL; @@ -263,8 +262,7 @@ static int vidioc_s_tuner(struct file *file, void *priv, static int vidioc_s_frequency(struct file *file, void *priv, struct v4l2_frequency *f) { - struct video_device *dev = video_devdata(file); - struct fmr2_device *fmr2 = video_get_drvdata(dev); + struct fmr2_device *fmr2 = video_drvdata(file); if (!(fmr2->flags & V4L2_TUNER_CAP_LOW)) f->frequency *= 1000; @@ -287,8 +285,7 @@ static int vidioc_s_frequency(struct file *file, void *priv, static int vidioc_g_frequency(struct file *file, void *priv, struct v4l2_frequency *f) { - struct video_device *dev = video_devdata(file); - struct fmr2_device *fmr2 = video_get_drvdata(dev); + struct fmr2_device *fmr2 = video_drvdata(file); f->type = V4L2_TUNER_RADIO; f->frequency = fmr2->curfreq; @@ -314,8 +311,7 @@ static int vidioc_queryctrl(struct file *file, void *priv, static int vidioc_g_ctrl(struct file *file, void *priv, struct v4l2_control *ctrl) { - struct video_device *dev = video_devdata(file); - struct fmr2_device *fmr2 = video_get_drvdata(dev); + struct fmr2_device *fmr2 = video_drvdata(file); switch (ctrl->id) { case V4L2_CID_AUDIO_MUTE: @@ -331,8 +327,7 @@ static int vidioc_g_ctrl(struct file *file, void *priv, static int vidioc_s_ctrl(struct file *file, void *priv, struct v4l2_control *ctrl) { - struct video_device *dev = video_devdata(file); - struct fmr2_device *fmr2 = video_get_drvdata(dev); + struct fmr2_device *fmr2 = video_drvdata(file); switch (ctrl->id) { case V4L2_CID_AUDIO_MUTE: diff --git a/drivers/media/radio/radio-si470x.c b/drivers/media/radio/radio-si470x.c index 337d557..f6cedcd 100644 --- a/drivers/media/radio/radio-si470x.c +++ b/drivers/media/radio/radio-si470x.c @@ -986,7 +986,7 @@ static void si470x_work(struct work_struct *work) static ssize_t si470x_fops_read(struct file *file, char __user *buf, size_t count, loff_t *ppos) { - struct si470x_device *radio = video_get_drvdata(video_devdata(file)); + struct si470x_device *radio = video_drvdata(file); int retval = 0; unsigned int block_count = 0; @@ -1047,7 +1047,7 @@ done: static unsigned int si470x_fops_poll(struct file *file, struct poll_table_struct *pts) { - struct si470x_device *radio = video_get_drvdata(video_devdata(file)); + struct si470x_device *radio = video_drvdata(file); int retval = 0; /* switch on rds reception */ @@ -1071,7 +1071,7 @@ static unsigned int si470x_fops_poll(struct file *file, */ static int si470x_fops_open(struct inode *inode, struct file *file) { - struct si470x_device *radio = video_get_drvdata(video_devdata(file)); + struct si470x_device *radio = video_drvdata(file); int retval; lock_kernel(); @@ -1101,7 +1101,7 @@ done: */ static int si470x_fops_release(struct inode *inode, struct file *file) { - struct si470x_device *radio = video_get_drvdata(video_devdata(file)); + struct si470x_device *radio = video_drvdata(file); int retval = 0; /* safety check */ @@ -1284,7 +1284,7 @@ done: static int si470x_vidioc_g_ctrl(struct file *file, void *priv, struct v4l2_control *ctrl) { - struct si470x_device *radio = video_get_drvdata(video_devdata(file)); + struct si470x_device *radio = video_drvdata(file); int retval = 0; /* safety checks */ @@ -1320,7 +1320,7 @@ done: static int si470x_vidioc_s_ctrl(struct file *file, void *priv, struct v4l2_control *ctrl) { - struct si470x_device *radio = video_get_drvdata(video_devdata(file)); + struct si470x_device *radio = video_drvdata(file); int retval = 0; /* safety checks */ @@ -1407,7 +1407,7 @@ done: static int si470x_vidioc_g_tuner(struct file *file, void *priv, struct v4l2_tuner *tuner) { - struct si470x_device *radio = video_get_drvdata(video_devdata(file)); + struct si470x_device *radio = video_drvdata(file); int retval = 0; /* safety checks */ @@ -1473,7 +1473,7 @@ done: static int si470x_vidioc_s_tuner(struct file *file, void *priv, struct v4l2_tuner *tuner) { - struct si470x_device *radio = video_get_drvdata(video_devdata(file)); + struct si470x_device *radio = video_drvdata(file); int retval = 0; /* safety checks */ @@ -1507,7 +1507,7 @@ done: static int si470x_vidioc_g_frequency(struct file *file, void *priv, struct v4l2_frequency *freq) { - struct si470x_device *radio = video_get_drvdata(video_devdata(file)); + struct si470x_device *radio = video_drvdata(file); int retval = 0; /* safety checks */ @@ -1536,7 +1536,7 @@ done: static int si470x_vidioc_s_frequency(struct file *file, void *priv, struct v4l2_frequency *freq) { - struct si470x_device *radio = video_get_drvdata(video_devdata(file)); + struct si470x_device *radio = video_drvdata(file); int retval = 0; /* safety checks */ @@ -1565,7 +1565,7 @@ done: static int si470x_vidioc_s_hw_freq_seek(struct file *file, void *priv, struct v4l2_hw_freq_seek *seek) { - struct si470x_device *radio = video_get_drvdata(video_devdata(file)); + struct si470x_device *radio = video_drvdata(file); int retval = 0; /* safety checks */ diff --git a/drivers/media/radio/radio-terratec.c b/drivers/media/radio/radio-terratec.c index 0bc9af6..0abb186 100644 --- a/drivers/media/radio/radio-terratec.c +++ b/drivers/media/radio/radio-terratec.c @@ -221,8 +221,7 @@ static int vidioc_querycap(struct file *file, void *priv, static int vidioc_g_tuner(struct file *file, void *priv, struct v4l2_tuner *v) { - struct video_device *dev = video_devdata(file); - struct tt_device *tt = video_get_drvdata(dev); + struct tt_device *tt = video_drvdata(file); if (v->index > 0) return -EINVAL; @@ -249,8 +248,7 @@ static int vidioc_s_tuner(struct file *file, void *priv, static int vidioc_s_frequency(struct file *file, void *priv, struct v4l2_frequency *f) { - struct video_device *dev = video_devdata(file); - struct tt_device *tt = video_get_drvdata(dev); + struct tt_device *tt = video_drvdata(file); tt->curfreq = f->frequency; tt_setfreq(tt, tt->curfreq); @@ -260,8 +258,7 @@ static int vidioc_s_frequency(struct file *file, void *priv, static int vidioc_g_frequency(struct file *file, void *priv, struct v4l2_frequency *f) { - struct video_device *dev = video_devdata(file); - struct tt_device *tt = video_get_drvdata(dev); + struct tt_device *tt = video_drvdata(file); f->type = V4L2_TUNER_RADIO; f->frequency = tt->curfreq; @@ -286,8 +283,7 @@ static int vidioc_queryctrl(struct file *file, void *priv, static int vidioc_g_ctrl(struct file *file, void *priv, struct v4l2_control *ctrl) { - struct video_device *dev = video_devdata(file); - struct tt_device *tt = video_get_drvdata(dev); + struct tt_device *tt = video_drvdata(file); switch (ctrl->id) { case V4L2_CID_AUDIO_MUTE: @@ -306,8 +302,7 @@ static int vidioc_g_ctrl(struct file *file, void *priv, static int vidioc_s_ctrl(struct file *file, void *priv, struct v4l2_control *ctrl) { - struct video_device *dev = video_devdata(file); - struct tt_device *tt = video_get_drvdata(dev); + struct tt_device *tt = video_drvdata(file); switch (ctrl->id) { case V4L2_CID_AUDIO_MUTE: diff --git a/drivers/media/radio/radio-typhoon.c b/drivers/media/radio/radio-typhoon.c index 27255d7..952ec35 100644 --- a/drivers/media/radio/radio-typhoon.c +++ b/drivers/media/radio/radio-typhoon.c @@ -223,8 +223,7 @@ static int vidioc_s_tuner(struct file *file, void *priv, static int vidioc_s_frequency(struct file *file, void *priv, struct v4l2_frequency *f) { - struct video_device *dev = video_devdata(file); - struct typhoon_device *typhoon = video_get_drvdata(dev); + struct typhoon_device *typhoon = video_drvdata(file); typhoon->curfreq = f->frequency; typhoon_setfreq(typhoon, typhoon->curfreq); @@ -234,8 +233,7 @@ static int vidioc_s_frequency(struct file *file, void *priv, static int vidioc_g_frequency(struct file *file, void *priv, struct v4l2_frequency *f) { - struct video_device *dev = video_devdata(file); - struct typhoon_device *typhoon = video_get_drvdata(dev); + struct typhoon_device *typhoon = video_drvdata(file); f->type = V4L2_TUNER_RADIO; f->frequency = typhoon->curfreq; @@ -261,8 +259,7 @@ static int vidioc_queryctrl(struct file *file, void *priv, static int vidioc_g_ctrl(struct file *file, void *priv, struct v4l2_control *ctrl) { - struct video_device *dev = video_devdata(file); - struct typhoon_device *typhoon = video_get_drvdata(dev); + struct typhoon_device *typhoon = video_drvdata(file); switch (ctrl->id) { case V4L2_CID_AUDIO_MUTE: @@ -278,8 +275,7 @@ static int vidioc_g_ctrl(struct file *file, void *priv, static int vidioc_s_ctrl (struct file *file, void *priv, struct v4l2_control *ctrl) { - struct video_device *dev = video_devdata(file); - struct typhoon_device *typhoon = video_get_drvdata(dev); + struct typhoon_device *typhoon = video_drvdata(file); switch (ctrl->id) { case V4L2_CID_AUDIO_MUTE: diff --git a/drivers/media/radio/radio-zoltrix.c b/drivers/media/radio/radio-zoltrix.c index 3a9a777..f75da63 100644 --- a/drivers/media/radio/radio-zoltrix.c +++ b/drivers/media/radio/radio-zoltrix.c @@ -246,8 +246,7 @@ static int vidioc_querycap(struct file *file, void *priv, static int vidioc_g_tuner(struct file *file, void *priv, struct v4l2_tuner *v) { - struct video_device *dev = video_devdata(file); - struct zol_device *zol = video_get_drvdata(dev); + struct zol_device *zol = video_drvdata(file); if (v->index > 0) return -EINVAL; @@ -277,8 +276,7 @@ static int vidioc_s_tuner(struct file *file, void *priv, static int vidioc_s_frequency(struct file *file, void *priv, struct v4l2_frequency *f) { - struct video_device *dev = video_devdata(file); - struct zol_device *zol = video_get_drvdata(dev); + struct zol_device *zol = video_drvdata(file); zol->curfreq = f->frequency; zol_setfreq(zol, zol->curfreq); @@ -288,8 +286,7 @@ static int vidioc_s_frequency(struct file *file, void *priv, static int vidioc_g_frequency(struct file *file, void *priv, struct v4l2_frequency *f) { - struct video_device *dev = video_devdata(file); - struct zol_device *zol = video_get_drvdata(dev); + struct zol_device *zol = video_drvdata(file); f->type = V4L2_TUNER_RADIO; f->frequency = zol->curfreq; @@ -314,8 +311,7 @@ static int vidioc_queryctrl(struct file *file, void *priv, static int vidioc_g_ctrl(struct file *file, void *priv, struct v4l2_control *ctrl) { - struct video_device *dev = video_devdata(file); - struct zol_device *zol = video_get_drvdata(dev); + struct zol_device *zol = video_drvdata(file); switch (ctrl->id) { case V4L2_CID_AUDIO_MUTE: @@ -331,8 +327,7 @@ static int vidioc_g_ctrl(struct file *file, void *priv, static int vidioc_s_ctrl(struct file *file, void *priv, struct v4l2_control *ctrl) { - struct video_device *dev = video_devdata(file); - struct zol_device *zol = video_get_drvdata(dev); + struct zol_device *zol = video_drvdata(file); switch (ctrl->id) { case V4L2_CID_AUDIO_MUTE: diff --git a/drivers/media/video/cpia2/cpia2_v4l.c b/drivers/media/video/cpia2/cpia2_v4l.c index eb9f15c..897e8d1 100644 --- a/drivers/media/video/cpia2/cpia2_v4l.c +++ b/drivers/media/video/cpia2/cpia2_v4l.c @@ -241,8 +241,7 @@ static struct v4l2_queryctrl controls[] = { *****************************************************************************/ static int cpia2_open(struct inode *inode, struct file *file) { - struct video_device *dev = video_devdata(file); - struct camera_data *cam = video_get_drvdata(dev); + struct camera_data *cam = video_drvdata(file); int retval = 0; if (!cam) { @@ -357,8 +356,7 @@ static int cpia2_close(struct inode *inode, struct file *file) static ssize_t cpia2_v4l_read(struct file *file, char __user *buf, size_t count, loff_t *off) { - struct video_device *dev = video_devdata(file); - struct camera_data *cam = video_get_drvdata(dev); + struct camera_data *cam = video_drvdata(file); int noblock = file->f_flags&O_NONBLOCK; struct cpia2_fh *fh = file->private_data; @@ -382,9 +380,7 @@ static ssize_t cpia2_v4l_read(struct file *file, char __user *buf, size_t count, *****************************************************************************/ static unsigned int cpia2_v4l_poll(struct file *filp, struct poll_table_struct *wait) { - struct video_device *dev = video_devdata(filp); - struct camera_data *cam = video_get_drvdata(dev); - + struct camera_data *cam = video_drvdata(filp); struct cpia2_fh *fh = filp->private_data; if(!cam) @@ -1579,8 +1575,7 @@ static int ioctl_dqbuf(void *arg,struct camera_data *cam, struct file *file) static int cpia2_do_ioctl(struct inode *inode, struct file *file, unsigned int ioctl_nr, void *arg) { - struct video_device *dev = video_devdata(file); - struct camera_data *cam = video_get_drvdata(dev); + struct camera_data *cam = video_drvdata(file); int retval = 0; if (!cam) @@ -1860,9 +1855,8 @@ static int cpia2_ioctl(struct inode *inode, struct file *file, *****************************************************************************/ static int cpia2_mmap(struct file *file, struct vm_area_struct *area) { + struct camera_data *cam = video_drvdata(file); int retval; - struct video_device *dev = video_devdata(file); - struct camera_data *cam = video_get_drvdata(dev); /* Priority check */ struct cpia2_fh *fh = file->private_data; diff --git a/drivers/media/video/et61x251/et61x251_core.c b/drivers/media/video/et61x251/et61x251_core.c index 8db2a05..7a85c41 100644 --- a/drivers/media/video/et61x251/et61x251_core.c +++ b/drivers/media/video/et61x251/et61x251_core.c @@ -1214,7 +1214,7 @@ static int et61x251_open(struct inode* inode, struct file* filp) if (!down_read_trylock(&et61x251_dev_lock)) return -ERESTARTSYS; - cam = video_get_drvdata(video_devdata(filp)); + cam = video_drvdata(filp); if (wait_for_completion_interruptible(&cam->probe)) { up_read(&et61x251_dev_lock); @@ -1297,7 +1297,7 @@ static int et61x251_release(struct inode* inode, struct file* filp) down_write(&et61x251_dev_lock); - cam = video_get_drvdata(video_devdata(filp)); + cam = video_drvdata(filp); et61x251_stop_transfer(cam); et61x251_release_buffers(cam); @@ -1318,7 +1318,7 @@ static ssize_t et61x251_read(struct file* filp, char __user * buf, size_t count, loff_t* f_pos) { - struct et61x251_device* cam = video_get_drvdata(video_devdata(filp)); + struct et61x251_device *cam = video_drvdata(filp); struct et61x251_frame_t* f, * i; unsigned long lock_flags; long timeout; @@ -1426,7 +1426,7 @@ exit: static unsigned int et61x251_poll(struct file *filp, poll_table *wait) { - struct et61x251_device* cam = video_get_drvdata(video_devdata(filp)); + struct et61x251_device *cam = video_drvdata(filp); struct et61x251_frame_t* f; unsigned long lock_flags; unsigned int mask = 0; @@ -1502,7 +1502,7 @@ static struct vm_operations_struct et61x251_vm_ops = { static int et61x251_mmap(struct file* filp, struct vm_area_struct *vma) { - struct et61x251_device* cam = video_get_drvdata(video_devdata(filp)); + struct et61x251_device *cam = video_drvdata(filp); unsigned long size = vma->vm_end - vma->vm_start, start = vma->vm_start; void *pos; @@ -2395,7 +2395,7 @@ et61x251_vidioc_s_parm(struct et61x251_device* cam, void __user * arg) static int et61x251_ioctl_v4l2(struct inode* inode, struct file* filp, unsigned int cmd, void __user * arg) { - struct et61x251_device* cam = video_get_drvdata(video_devdata(filp)); + struct et61x251_device *cam = video_drvdata(filp); switch (cmd) { @@ -2490,7 +2490,7 @@ static int et61x251_ioctl_v4l2(struct inode* inode, struct file* filp, static int et61x251_ioctl(struct inode* inode, struct file* filp, unsigned int cmd, unsigned long arg) { - struct et61x251_device* cam = video_get_drvdata(video_devdata(filp)); + struct et61x251_device *cam = video_drvdata(filp); int err = 0; if (mutex_lock_interruptible(&cam->fileop_mutex)) diff --git a/drivers/media/video/saa5246a.c b/drivers/media/video/saa5246a.c index 0178b49..ff81049 100644 --- a/drivers/media/video/saa5246a.c +++ b/drivers/media/video/saa5246a.c @@ -149,6 +149,7 @@ static int saa5246a_probe(struct i2c_adapter *adap) static int saa5246a_detach(struct i2c_client *client) { struct video_device *vd = i2c_get_clientdata(client); + i2c_detach_client(client); video_unregister_device(vd); kfree(video_get_drvdata(vd)); @@ -581,8 +582,7 @@ static inline int saa5246a_stop_dau(struct saa5246a_device *t, static int do_saa5246a_ioctl(struct inode *inode, struct file *file, unsigned int cmd, void *arg) { - struct video_device *vd = video_devdata(file); - struct saa5246a_device *t = video_get_drvdata(vd); + struct saa5246a_device *t = video_drvdata(file); switch(cmd) { @@ -723,8 +723,7 @@ static inline unsigned int vtx_fix_command(unsigned int cmd) static int saa5246a_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg) { - struct video_device *vd = video_devdata(file); - struct saa5246a_device *t = video_get_drvdata(vd); + struct saa5246a_device *t = video_drvdata(file); int err; cmd = vtx_fix_command(cmd); @@ -736,8 +735,7 @@ static int saa5246a_ioctl(struct inode *inode, struct file *file, static int saa5246a_open(struct inode *inode, struct file *file) { - struct video_device *vd = video_devdata(file); - struct saa5246a_device *t = video_get_drvdata(vd); + struct saa5246a_device *t = video_drvdata(file); if (t->client == NULL) return -ENODEV; @@ -779,8 +777,7 @@ static int saa5246a_open(struct inode *inode, struct file *file) static int saa5246a_release(struct inode *inode, struct file *file) { - struct video_device *vd = video_devdata(file); - struct saa5246a_device *t = video_get_drvdata(vd); + struct saa5246a_device *t = video_drvdata(file); /* Stop all acquisition circuits. */ i2c_senddata(t, SAA5246A_REGISTER_R1, diff --git a/drivers/media/video/saa5249.c b/drivers/media/video/saa5249.c index c784715..8517aa4f 100644 --- a/drivers/media/video/saa5249.c +++ b/drivers/media/video/saa5249.c @@ -319,8 +319,7 @@ static int do_saa5249_ioctl(struct inode *inode, struct file *file, unsigned int cmd, void *arg) { static int virtual_mode = false; - struct video_device *vd = video_devdata(file); - struct saa5249_device *t = video_get_drvdata(vd); + struct saa5249_device *t = video_drvdata(file); switch(cmd) { @@ -618,8 +617,7 @@ static inline unsigned int vtx_fix_command(unsigned int cmd) static int saa5249_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg) { - struct video_device *vd = video_devdata(file); - struct saa5249_device *t = video_get_drvdata(vd); + struct saa5249_device *t = video_drvdata(file); int err; cmd = vtx_fix_command(cmd); @@ -631,8 +629,7 @@ static int saa5249_ioctl(struct inode *inode, struct file *file, static int saa5249_open(struct inode *inode, struct file *file) { - struct video_device *vd = video_devdata(file); - struct saa5249_device *t = video_get_drvdata(vd); + struct saa5249_device *t = video_drvdata(file); int pgbuf; if (t->client == NULL) @@ -669,8 +666,7 @@ static int saa5249_open(struct inode *inode, struct file *file) static int saa5249_release(struct inode *inode, struct file *file) { - struct video_device *vd = video_devdata(file); - struct saa5249_device *t = video_get_drvdata(vd); + struct saa5249_device *t = video_drvdata(file); i2c_senddata(t, 1, 0x20, -1); /* Turn off CCT */ i2c_senddata(t, 5, 3, 3, -1); /* Turn off TV-display */ diff --git a/drivers/media/video/sn9c102/sn9c102_core.c b/drivers/media/video/sn9c102/sn9c102_core.c index 2da6938..4b76c45 100644 --- a/drivers/media/video/sn9c102/sn9c102_core.c +++ b/drivers/media/video/sn9c102/sn9c102_core.c @@ -1746,7 +1746,7 @@ static int sn9c102_open(struct inode* inode, struct file* filp) if (!down_read_trylock(&sn9c102_dev_lock)) return -ERESTARTSYS; - cam = video_get_drvdata(video_devdata(filp)); + cam = video_drvdata(filp); if (wait_for_completion_interruptible(&cam->probe)) { up_read(&sn9c102_dev_lock); @@ -1843,7 +1843,7 @@ static int sn9c102_release(struct inode* inode, struct file* filp) down_write(&sn9c102_dev_lock); - cam = video_get_drvdata(video_devdata(filp)); + cam = video_drvdata(filp); sn9c102_stop_transfer(cam); sn9c102_release_buffers(cam); @@ -1863,7 +1863,7 @@ static int sn9c102_release(struct inode* inode, struct file* filp) static ssize_t sn9c102_read(struct file* filp, char __user * buf, size_t count, loff_t* f_pos) { - struct sn9c102_device* cam = video_get_drvdata(video_devdata(filp)); + struct sn9c102_device *cam = video_drvdata(filp); struct sn9c102_frame_t* f, * i; unsigned long lock_flags; long timeout; @@ -1987,7 +1987,7 @@ exit: static unsigned int sn9c102_poll(struct file *filp, poll_table *wait) { - struct sn9c102_device* cam = video_get_drvdata(video_devdata(filp)); + struct sn9c102_device *cam = video_drvdata(filp); struct sn9c102_frame_t* f; unsigned long lock_flags; unsigned int mask = 0; @@ -2063,7 +2063,7 @@ static struct vm_operations_struct sn9c102_vm_ops = { static int sn9c102_mmap(struct file* filp, struct vm_area_struct *vma) { - struct sn9c102_device* cam = video_get_drvdata(video_devdata(filp)); + struct sn9c102_device *cam = video_drvdata(filp); unsigned long size = vma->vm_end - vma->vm_start, start = vma->vm_start; void *pos; @@ -3075,7 +3075,7 @@ sn9c102_vidioc_s_audio(struct sn9c102_device* cam, void __user * arg) static int sn9c102_ioctl_v4l2(struct inode* inode, struct file* filp, unsigned int cmd, void __user * arg) { - struct sn9c102_device* cam = video_get_drvdata(video_devdata(filp)); + struct sn9c102_device *cam = video_drvdata(filp); switch (cmd) { @@ -3179,7 +3179,7 @@ static int sn9c102_ioctl_v4l2(struct inode* inode, struct file* filp, static int sn9c102_ioctl(struct inode* inode, struct file* filp, unsigned int cmd, unsigned long arg) { - struct sn9c102_device* cam = video_get_drvdata(video_devdata(filp)); + struct sn9c102_device *cam = video_drvdata(filp); int err = 0; if (mutex_lock_interruptible(&cam->fileop_mutex)) diff --git a/drivers/media/video/usbvideo/vicam.c b/drivers/media/video/usbvideo/vicam.c index 1ffcc39..7a127d6 100644 --- a/drivers/media/video/usbvideo/vicam.c +++ b/drivers/media/video/usbvideo/vicam.c @@ -472,8 +472,7 @@ vicam_ioctl(struct inode *inode, struct file *file, unsigned int ioctlnr, unsign static int vicam_open(struct inode *inode, struct file *file) { - struct video_device *dev = video_devdata(file); - struct vicam_camera *cam = video_get_drvdata(dev); + struct vicam_camera *cam = video_drvdata(file); DBG("open\n"); diff --git a/drivers/media/video/usbvision/usbvision-video.c b/drivers/media/video/usbvision/usbvision-video.c index b76295a..782ee64 100644 --- a/drivers/media/video/usbvision/usbvision-video.c +++ b/drivers/media/video/usbvision/usbvision-video.c @@ -360,9 +360,7 @@ static void usbvision_remove_sysfs(struct video_device *vdev) */ static int usbvision_v4l2_open(struct inode *inode, struct file *file) { - struct video_device *dev = video_devdata(file); - struct usb_usbvision *usbvision = - (struct usb_usbvision *) video_get_drvdata(dev); + struct usb_usbvision *usbvision = video_drvdata(file); int errCode = 0; PDEBUG(DBG_IO, "open"); @@ -439,9 +437,7 @@ static int usbvision_v4l2_open(struct inode *inode, struct file *file) */ static int usbvision_v4l2_close(struct inode *inode, struct file *file) { - struct video_device *dev = video_devdata(file); - struct usb_usbvision *usbvision = - (struct usb_usbvision *) video_get_drvdata(dev); + struct usb_usbvision *usbvision = video_drvdata(file); PDEBUG(DBG_IO, "close"); mutex_lock(&usbvision->lock); @@ -486,9 +482,7 @@ static int usbvision_v4l2_close(struct inode *inode, struct file *file) static int vidioc_g_register (struct file *file, void *priv, struct v4l2_register *reg) { - struct video_device *dev = video_devdata(file); - struct usb_usbvision *usbvision = - (struct usb_usbvision *) video_get_drvdata(dev); + struct usb_usbvision *usbvision = video_drvdata(file); int errCode; if (!v4l2_chip_match_host(reg->match_type, reg->match_chip)) @@ -507,9 +501,7 @@ static int vidioc_g_register (struct file *file, void *priv, static int vidioc_s_register (struct file *file, void *priv, struct v4l2_register *reg) { - struct video_device *dev = video_devdata(file); - struct usb_usbvision *usbvision = - (struct usb_usbvision *) video_get_drvdata(dev); + struct usb_usbvision *usbvision = video_drvdata(file); int errCode; if (!v4l2_chip_match_host(reg->match_type, reg->match_chip)) @@ -528,9 +520,7 @@ static int vidioc_s_register (struct file *file, void *priv, static int vidioc_querycap (struct file *file, void *priv, struct v4l2_capability *vc) { - struct video_device *dev = video_devdata(file); - struct usb_usbvision *usbvision = - (struct usb_usbvision *) video_get_drvdata(dev); + struct usb_usbvision *usbvision = video_drvdata(file); strlcpy(vc->driver, "USBVision", sizeof(vc->driver)); strlcpy(vc->card, @@ -550,9 +540,7 @@ static int vidioc_querycap (struct file *file, void *priv, static int vidioc_enum_input (struct file *file, void *priv, struct v4l2_input *vi) { - struct video_device *dev = video_devdata(file); - struct usb_usbvision *usbvision = - (struct usb_usbvision *) video_get_drvdata(dev); + struct usb_usbvision *usbvision = video_drvdata(file); int chan; if ((vi->index >= usbvision->video_inputs) || (vi->index < 0) ) @@ -605,9 +593,7 @@ static int vidioc_enum_input (struct file *file, void *priv, static int vidioc_g_input (struct file *file, void *priv, unsigned int *input) { - struct video_device *dev = video_devdata(file); - struct usb_usbvision *usbvision = - (struct usb_usbvision *) video_get_drvdata(dev); + struct usb_usbvision *usbvision = video_drvdata(file); *input = usbvision->ctl_input; return 0; @@ -615,9 +601,7 @@ static int vidioc_g_input (struct file *file, void *priv, unsigned int *input) static int vidioc_s_input (struct file *file, void *priv, unsigned int input) { - struct video_device *dev = video_devdata(file); - struct usb_usbvision *usbvision = - (struct usb_usbvision *) video_get_drvdata(dev); + struct usb_usbvision *usbvision = video_drvdata(file); if ((input >= usbvision->video_inputs) || (input < 0) ) return -EINVAL; @@ -634,9 +618,8 @@ static int vidioc_s_input (struct file *file, void *priv, unsigned int input) static int vidioc_s_std (struct file *file, void *priv, v4l2_std_id *id) { - struct video_device *dev = video_devdata(file); - struct usb_usbvision *usbvision = - (struct usb_usbvision *) video_get_drvdata(dev); + struct usb_usbvision *usbvision = video_drvdata(file); + usbvision->tvnormId=*id; mutex_lock(&usbvision->lock); @@ -652,9 +635,7 @@ static int vidioc_s_std (struct file *file, void *priv, v4l2_std_id *id) static int vidioc_g_tuner (struct file *file, void *priv, struct v4l2_tuner *vt) { - struct video_device *dev = video_devdata(file); - struct usb_usbvision *usbvision = - (struct usb_usbvision *) video_get_drvdata(dev); + struct usb_usbvision *usbvision = video_drvdata(file); if (!usbvision->have_tuner || vt->index) // Only tuner 0 return -EINVAL; @@ -673,9 +654,7 @@ static int vidioc_g_tuner (struct file *file, void *priv, static int vidioc_s_tuner (struct file *file, void *priv, struct v4l2_tuner *vt) { - struct video_device *dev = video_devdata(file); - struct usb_usbvision *usbvision = - (struct usb_usbvision *) video_get_drvdata(dev); + struct usb_usbvision *usbvision = video_drvdata(file); // Only no or one tuner for now if (!usbvision->have_tuner || vt->index) @@ -689,9 +668,7 @@ static int vidioc_s_tuner (struct file *file, void *priv, static int vidioc_g_frequency (struct file *file, void *priv, struct v4l2_frequency *freq) { - struct video_device *dev = video_devdata(file); - struct usb_usbvision *usbvision = - (struct usb_usbvision *) video_get_drvdata(dev); + struct usb_usbvision *usbvision = video_drvdata(file); freq->tuner = 0; // Only one tuner if(usbvision->radio) { @@ -707,9 +684,7 @@ static int vidioc_g_frequency (struct file *file, void *priv, static int vidioc_s_frequency (struct file *file, void *priv, struct v4l2_frequency *freq) { - struct video_device *dev = video_devdata(file); - struct usb_usbvision *usbvision = - (struct usb_usbvision *) video_get_drvdata(dev); + struct usb_usbvision *usbvision = video_drvdata(file); // Only no or one tuner for now if (!usbvision->have_tuner || freq->tuner) @@ -723,9 +698,7 @@ static int vidioc_s_frequency (struct file *file, void *priv, static int vidioc_g_audio (struct file *file, void *priv, struct v4l2_audio *a) { - struct video_device *dev = video_devdata(file); - struct usb_usbvision *usbvision = - (struct usb_usbvision *) video_get_drvdata(dev); + struct usb_usbvision *usbvision = video_drvdata(file); memset(a,0,sizeof(*a)); if(usbvision->radio) { @@ -750,9 +723,7 @@ static int vidioc_s_audio (struct file *file, void *fh, static int vidioc_queryctrl (struct file *file, void *priv, struct v4l2_queryctrl *ctrl) { - struct video_device *dev = video_devdata(file); - struct usb_usbvision *usbvision = - (struct usb_usbvision *) video_get_drvdata(dev); + struct usb_usbvision *usbvision = video_drvdata(file); int id=ctrl->id; memset(ctrl,0,sizeof(*ctrl)); @@ -769,9 +740,7 @@ static int vidioc_queryctrl (struct file *file, void *priv, static int vidioc_g_ctrl (struct file *file, void *priv, struct v4l2_control *ctrl) { - struct video_device *dev = video_devdata(file); - struct usb_usbvision *usbvision = - (struct usb_usbvision *) video_get_drvdata(dev); + struct usb_usbvision *usbvision = video_drvdata(file); call_i2c_clients(usbvision, VIDIOC_G_CTRL, ctrl); return 0; @@ -780,9 +749,7 @@ static int vidioc_g_ctrl (struct file *file, void *priv, static int vidioc_s_ctrl (struct file *file, void *priv, struct v4l2_control *ctrl) { - struct video_device *dev = video_devdata(file); - struct usb_usbvision *usbvision = - (struct usb_usbvision *) video_get_drvdata(dev); + struct usb_usbvision *usbvision = video_drvdata(file); call_i2c_clients(usbvision, VIDIOC_S_CTRL, ctrl); return 0; @@ -791,9 +758,7 @@ static int vidioc_s_ctrl (struct file *file, void *priv, static int vidioc_reqbufs (struct file *file, void *priv, struct v4l2_requestbuffers *vr) { - struct video_device *dev = video_devdata(file); - struct usb_usbvision *usbvision = - (struct usb_usbvision *) video_get_drvdata(dev); + struct usb_usbvision *usbvision = video_drvdata(file); int ret; RESTRICT_TO_RANGE(vr->count,1,USBVISION_NUMFRAMES); @@ -821,9 +786,7 @@ static int vidioc_reqbufs (struct file *file, static int vidioc_querybuf (struct file *file, void *priv, struct v4l2_buffer *vb) { - struct video_device *dev = video_devdata(file); - struct usb_usbvision *usbvision = - (struct usb_usbvision *) video_get_drvdata(dev); + struct usb_usbvision *usbvision = video_drvdata(file); struct usbvision_frame *frame; /* FIXME : must control @@ -859,9 +822,7 @@ static int vidioc_querybuf (struct file *file, static int vidioc_qbuf (struct file *file, void *priv, struct v4l2_buffer *vb) { - struct video_device *dev = video_devdata(file); - struct usb_usbvision *usbvision = - (struct usb_usbvision *) video_get_drvdata(dev); + struct usb_usbvision *usbvision = video_drvdata(file); struct usbvision_frame *frame; unsigned long lock_flags; @@ -898,9 +859,7 @@ static int vidioc_qbuf (struct file *file, void *priv, struct v4l2_buffer *vb) static int vidioc_dqbuf (struct file *file, void *priv, struct v4l2_buffer *vb) { - struct video_device *dev = video_devdata(file); - struct usb_usbvision *usbvision = - (struct usb_usbvision *) video_get_drvdata(dev); + struct usb_usbvision *usbvision = video_drvdata(file); int ret; struct usbvision_frame *f; unsigned long lock_flags; @@ -941,9 +900,7 @@ static int vidioc_dqbuf (struct file *file, void *priv, struct v4l2_buffer *vb) static int vidioc_streamon(struct file *file, void *priv, enum v4l2_buf_type i) { - struct video_device *dev = video_devdata(file); - struct usb_usbvision *usbvision = - (struct usb_usbvision *) video_get_drvdata(dev); + struct usb_usbvision *usbvision = video_drvdata(file); int b=V4L2_BUF_TYPE_VIDEO_CAPTURE; usbvision->streaming = Stream_On; @@ -955,9 +912,7 @@ static int vidioc_streamon(struct file *file, void *priv, enum v4l2_buf_type i) static int vidioc_streamoff(struct file *file, void *priv, enum v4l2_buf_type type) { - struct video_device *dev = video_devdata(file); - struct usb_usbvision *usbvision = - (struct usb_usbvision *) video_get_drvdata(dev); + struct usb_usbvision *usbvision = video_drvdata(file); int b=V4L2_BUF_TYPE_VIDEO_CAPTURE; if (type != V4L2_BUF_TYPE_VIDEO_CAPTURE) @@ -990,9 +945,7 @@ static int vidioc_enum_fmt_vid_cap (struct file *file, void *priv, static int vidioc_g_fmt_vid_cap (struct file *file, void *priv, struct v4l2_format *vf) { - struct video_device *dev = video_devdata(file); - struct usb_usbvision *usbvision = - (struct usb_usbvision *) video_get_drvdata(dev); + struct usb_usbvision *usbvision = video_drvdata(file); vf->fmt.pix.width = usbvision->curwidth; vf->fmt.pix.height = usbvision->curheight; vf->fmt.pix.pixelformat = usbvision->palette.format; @@ -1008,9 +961,7 @@ static int vidioc_g_fmt_vid_cap (struct file *file, void *priv, static int vidioc_try_fmt_vid_cap (struct file *file, void *priv, struct v4l2_format *vf) { - struct video_device *dev = video_devdata(file); - struct usb_usbvision *usbvision = - (struct usb_usbvision *) video_get_drvdata(dev); + struct usb_usbvision *usbvision = video_drvdata(file); int formatIdx; /* Find requested format in available ones */ @@ -1038,9 +989,7 @@ static int vidioc_try_fmt_vid_cap (struct file *file, void *priv, static int vidioc_s_fmt_vid_cap(struct file *file, void *priv, struct v4l2_format *vf) { - struct video_device *dev = video_devdata(file); - struct usb_usbvision *usbvision = - (struct usb_usbvision *) video_get_drvdata(dev); + struct usb_usbvision *usbvision = video_drvdata(file); int ret; if( 0 != (ret=vidioc_try_fmt_vid_cap (file, priv, vf)) ) { @@ -1068,9 +1017,7 @@ static int vidioc_s_fmt_vid_cap(struct file *file, void *priv, static ssize_t usbvision_v4l2_read(struct file *file, char __user *buf, size_t count, loff_t *ppos) { - struct video_device *dev = video_devdata(file); - struct usb_usbvision *usbvision = - (struct usb_usbvision *) video_get_drvdata(dev); + struct usb_usbvision *usbvision = video_drvdata(file); int noblock = file->f_flags & O_NONBLOCK; unsigned long lock_flags; @@ -1179,10 +1126,7 @@ static int usbvision_v4l2_mmap(struct file *file, struct vm_area_struct *vma) start = vma->vm_start; void *pos; u32 i; - - struct video_device *dev = video_devdata(file); - struct usb_usbvision *usbvision = - (struct usb_usbvision *) video_get_drvdata(dev); + struct usb_usbvision *usbvision = video_drvdata(file); PDEBUG(DBG_MMAP, "mmap"); @@ -1239,9 +1183,7 @@ static int usbvision_v4l2_mmap(struct file *file, struct vm_area_struct *vma) */ static int usbvision_radio_open(struct inode *inode, struct file *file) { - struct video_device *dev = video_devdata(file); - struct usb_usbvision *usbvision = - (struct usb_usbvision *) video_get_drvdata(dev); + struct usb_usbvision *usbvision = video_drvdata(file); int errCode = 0; PDEBUG(DBG_IO, "%s:", __func__); @@ -1291,9 +1233,7 @@ out: static int usbvision_radio_close(struct inode *inode, struct file *file) { - struct video_device *dev = video_devdata(file); - struct usb_usbvision *usbvision = - (struct usb_usbvision *) video_get_drvdata(dev); + struct usb_usbvision *usbvision = video_drvdata(file); int errCode = 0; PDEBUG(DBG_IO, ""); diff --git a/drivers/media/video/uvc/uvc_v4l2.c b/drivers/media/video/uvc/uvc_v4l2.c index d7bd71b..d4758c8 100644 --- a/drivers/media/video/uvc/uvc_v4l2.c +++ b/drivers/media/video/uvc/uvc_v4l2.c @@ -400,15 +400,13 @@ static int uvc_has_privileges(struct uvc_fh *handle) static int uvc_v4l2_open(struct inode *inode, struct file *file) { - struct video_device *vdev; struct uvc_video_device *video; struct uvc_fh *handle; int ret = 0; uvc_trace(UVC_TRACE_CALLS, "uvc_v4l2_open\n"); mutex_lock(&uvc_driver.open_mutex); - vdev = video_devdata(file); - video = video_get_drvdata(vdev); + video = video_drvdata(file); if (video->dev->state & UVC_DEV_DISCONNECTED) { ret = -ENODEV; @@ -440,8 +438,7 @@ done: static int uvc_v4l2_release(struct inode *inode, struct file *file) { - struct video_device *vdev = video_devdata(file); - struct uvc_video_device *video = video_get_drvdata(vdev); + struct uvc_video_device *video = video_drvdata(file); struct uvc_fh *handle = (struct uvc_fh *)file->private_data; uvc_trace(UVC_TRACE_CALLS, "uvc_v4l2_release\n"); @@ -1031,8 +1028,7 @@ static struct vm_operations_struct uvc_vm_ops = { static int uvc_v4l2_mmap(struct file *file, struct vm_area_struct *vma) { - struct video_device *vdev = video_devdata(file); - struct uvc_video_device *video = video_get_drvdata(vdev); + struct uvc_video_device *video = video_drvdata(file); struct uvc_buffer *uninitialized_var(buffer); struct page *page; unsigned long addr, start, size; @@ -1085,8 +1081,7 @@ done: static unsigned int uvc_v4l2_poll(struct file *file, poll_table *wait) { - struct video_device *vdev = video_devdata(file); - struct uvc_video_device *video = video_get_drvdata(vdev); + struct uvc_video_device *video = video_drvdata(file); uvc_trace(UVC_TRACE_CALLS, "uvc_v4l2_poll\n"); diff --git a/drivers/media/video/vino.c b/drivers/media/video/vino.c index ca421cc..8ec57df 100644 --- a/drivers/media/video/vino.c +++ b/drivers/media/video/vino.c @@ -4024,8 +4024,7 @@ out: static int vino_open(struct inode *inode, struct file *file) { - struct video_device *dev = video_devdata(file); - struct vino_channel_settings *vcs = video_get_drvdata(dev); + struct vino_channel_settings *vcs = video_drvdata(file); int ret = 0; dprintk("open(): channel = %c\n", (vcs->channel == VINO_CHANNEL_A) ? 'A' : 'B'); @@ -4056,8 +4055,7 @@ static int vino_open(struct inode *inode, struct file *file) static int vino_close(struct inode *inode, struct file *file) { - struct video_device *dev = video_devdata(file); - struct vino_channel_settings *vcs = video_get_drvdata(dev); + struct vino_channel_settings *vcs = video_drvdata(file); dprintk("close():\n"); mutex_lock(&vcs->mutex); @@ -4100,8 +4098,7 @@ static struct vm_operations_struct vino_vm_ops = { static int vino_mmap(struct file *file, struct vm_area_struct *vma) { - struct video_device *dev = video_devdata(file); - struct vino_channel_settings *vcs = video_get_drvdata(dev); + struct vino_channel_settings *vcs = video_drvdata(file); unsigned long start = vma->vm_start; unsigned long size = vma->vm_end - vma->vm_start; @@ -4206,8 +4203,7 @@ out: static unsigned int vino_poll(struct file *file, poll_table *pt) { - struct video_device *dev = video_devdata(file); - struct vino_channel_settings *vcs = video_get_drvdata(dev); + struct vino_channel_settings *vcs = video_drvdata(file); unsigned int outgoing; unsigned int ret = 0; @@ -4247,8 +4243,7 @@ error: static int vino_do_ioctl(struct inode *inode, struct file *file, unsigned int cmd, void *arg) { - struct video_device *dev = video_devdata(file); - struct vino_channel_settings *vcs = video_get_drvdata(dev); + struct vino_channel_settings *vcs = video_drvdata(file); #ifdef VINO_DEBUG switch (_IOC_TYPE(cmd)) { @@ -4355,8 +4350,7 @@ static int vino_do_ioctl(struct inode *inode, struct file *file, static int vino_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg) { - struct video_device *dev = video_devdata(file); - struct vino_channel_settings *vcs = video_get_drvdata(dev); + struct vino_channel_settings *vcs = video_drvdata(file); int ret; if (mutex_lock_interruptible(&vcs->mutex)) diff --git a/drivers/media/video/w9966.c b/drivers/media/video/w9966.c index 14ebb15..b2dbe48 100644 --- a/drivers/media/video/w9966.c +++ b/drivers/media/video/w9966.c @@ -187,16 +187,14 @@ static ssize_t w9966_v4l_read(struct file *file, char __user *buf, static int w9966_exclusive_open(struct inode *inode, struct file *file) { - struct video_device *vdev = video_devdata(file); - struct w9966_dev *cam = video_get_drvdata(vdev); + struct w9966_dev *cam = video_drvdata(file); return test_and_set_bit(0, &cam->in_use) ? -EBUSY : 0; } static int w9966_exclusive_release(struct inode *inode, struct file *file) { - struct video_device *vdev = video_devdata(file); - struct w9966_dev *cam = video_get_drvdata(vdev); + struct w9966_dev *cam = video_drvdata(file); clear_bit(0, &cam->in_use); return 0; @@ -732,8 +730,7 @@ static int w9966_wReg_i2c(struct w9966_dev* cam, int reg, int data) static int w9966_v4l_do_ioctl(struct inode *inode, struct file *file, unsigned int cmd, void *arg) { - struct video_device *vdev = video_devdata(file); - struct w9966_dev *cam = video_get_drvdata(vdev); + struct w9966_dev *cam = video_drvdata(file); switch(cmd) { @@ -891,8 +888,7 @@ static int w9966_v4l_ioctl(struct inode *inode, struct file *file, static ssize_t w9966_v4l_read(struct file *file, char __user *buf, size_t count, loff_t *ppos) { - struct video_device *vdev = video_devdata(file); - struct w9966_dev *cam = video_get_drvdata(vdev); + struct w9966_dev *cam = video_drvdata(file); unsigned char addr = 0xa0; // ECP, read, CCD-transfer, 00000 unsigned char __user *dest = (unsigned char __user *)buf; unsigned long dleft = count; diff --git a/drivers/media/video/zc0301/zc0301_core.c b/drivers/media/video/zc0301/zc0301_core.c index 0c32877..6a0902b 100644 --- a/drivers/media/video/zc0301/zc0301_core.c +++ b/drivers/media/video/zc0301/zc0301_core.c @@ -657,7 +657,7 @@ static int zc0301_open(struct inode* inode, struct file* filp) if (!down_read_trylock(&zc0301_dev_lock)) return -EAGAIN; - cam = video_get_drvdata(video_devdata(filp)); + cam = video_drvdata(filp); if (wait_for_completion_interruptible(&cam->probe)) { up_read(&zc0301_dev_lock); @@ -739,7 +739,7 @@ static int zc0301_release(struct inode* inode, struct file* filp) down_write(&zc0301_dev_lock); - cam = video_get_drvdata(video_devdata(filp)); + cam = video_drvdata(filp); zc0301_stop_transfer(cam); zc0301_release_buffers(cam); @@ -759,7 +759,7 @@ static int zc0301_release(struct inode* inode, struct file* filp) static ssize_t zc0301_read(struct file* filp, char __user * buf, size_t count, loff_t* f_pos) { - struct zc0301_device* cam = video_get_drvdata(video_devdata(filp)); + struct zc0301_device *cam = video_drvdata(filp); struct zc0301_frame_t* f, * i; unsigned long lock_flags; long timeout; @@ -866,7 +866,7 @@ exit: static unsigned int zc0301_poll(struct file *filp, poll_table *wait) { - struct zc0301_device* cam = video_get_drvdata(video_devdata(filp)); + struct zc0301_device *cam = video_drvdata(filp); struct zc0301_frame_t* f; unsigned long lock_flags; unsigned int mask = 0; @@ -941,7 +941,7 @@ static struct vm_operations_struct zc0301_vm_ops = { static int zc0301_mmap(struct file* filp, struct vm_area_struct *vma) { - struct zc0301_device* cam = video_get_drvdata(video_devdata(filp)); + struct zc0301_device *cam = video_drvdata(filp); unsigned long size = vma->vm_end - vma->vm_start, start = vma->vm_start; void *pos; @@ -1796,7 +1796,7 @@ zc0301_vidioc_s_parm(struct zc0301_device* cam, void __user * arg) static int zc0301_ioctl_v4l2(struct inode* inode, struct file* filp, unsigned int cmd, void __user * arg) { - struct zc0301_device* cam = video_get_drvdata(video_devdata(filp)); + struct zc0301_device *cam = video_drvdata(filp); switch (cmd) { @@ -1891,7 +1891,7 @@ static int zc0301_ioctl_v4l2(struct inode* inode, struct file* filp, static int zc0301_ioctl(struct inode* inode, struct file* filp, unsigned int cmd, unsigned long arg) { - struct zc0301_device* cam = video_get_drvdata(video_devdata(filp)); + struct zc0301_device *cam = video_drvdata(filp); int err = 0; if (mutex_lock_interruptible(&cam->fileop_mutex)) diff --git a/sound/i2c/other/tea575x-tuner.c b/sound/i2c/other/tea575x-tuner.c index 621d7fe..c13a178 100644 --- a/sound/i2c/other/tea575x-tuner.c +++ b/sound/i2c/other/tea575x-tuner.c @@ -87,8 +87,7 @@ static void snd_tea575x_set_freq(struct snd_tea575x *tea) static int snd_tea575x_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long data) { - struct video_device *dev = video_devdata(file); - struct snd_tea575x *tea = video_get_drvdata(dev); + struct snd_tea575x *tea = video_drvdata(file); void __user *arg = (void __user *)data; switch(cmd) { @@ -177,16 +176,14 @@ static void snd_tea575x_release(struct video_device *vfd) static int snd_tea575x_exclusive_open(struct inode *inode, struct file *file) { - struct video_device *dev = video_devdata(file); - struct snd_tea575x *tea = video_get_drvdata(dev); + struct snd_tea575x *tea = video_drvdata(file); return test_and_set_bit(0, &tea->in_use) ? -EBUSY : 0; } static int snd_tea575x_exclusive_release(struct inode *inode, struct file *file) { - struct video_device *dev = video_devdata(file); - struct snd_tea575x *tea = video_get_drvdata(dev); + struct snd_tea575x *tea = video_drvdata(file); clear_bit(0, &tea->in_use); return 0; -- cgit v0.10.2 From 9d95af9d09d537d287eea9914c0d1ca4cfa0ec7f Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Sun, 24 Aug 2008 11:18:47 -0300 Subject: V4L/DVB (8791): v4l2-dev: do not clear the driver_data field The driver_data field of the device structure was zeroed, thus losing this information. Many drivers set this up before calling video_device_register, so we have to ensure that it isn't lost. Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/v4l2-dev.c b/drivers/media/video/v4l2-dev.c index 1ec0a1a..99f7ee4 100644 --- a/drivers/media/video/v4l2-dev.c +++ b/drivers/media/video/v4l2-dev.c @@ -226,6 +226,7 @@ int video_register_device_index(struct video_device *vfd, int type, int nr, int end; int ret; char *name_base; + void *priv = video_get_drvdata(vfd); /* the release callback MUST be present */ BUG_ON(!vfd->release); @@ -295,6 +296,9 @@ int video_register_device_index(struct video_device *vfd, int type, int nr, /* sysfs class */ memset(&vfd->dev, 0, sizeof(vfd->dev)); + /* The memset above cleared the device's drvdata, so + put back the copy we made earlier. */ + video_set_drvdata(vfd, priv); vfd->dev.class = &video_class; vfd->dev.devt = MKDEV(VIDEO_MAJOR, vfd->minor); if (vfd->parent) -- cgit v0.10.2 From f03813e4d1900b619d4cb133506b130e535614f0 Mon Sep 17 00:00:00 2001 From: Dmitry Belimov Date: Tue, 26 Aug 2008 13:44:40 -0300 Subject: V4L/DVB (8795): saa7134-empress: insert leading null bytes for Beholder M6 empress cards Additional code to improve the init sequence and add board type tests were done by Hans Verkuil. Signed-off-by: Beholder Intl. Ltd. Dmitry Belimov Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/saa7134/saa6752hs.c b/drivers/media/video/saa7134/saa6752hs.c index 28499e5..f40cb0b 100644 --- a/drivers/media/video/saa7134/saa6752hs.c +++ b/drivers/media/video/saa7134/saa6752hs.c @@ -653,7 +653,7 @@ static int saa6752hs_qmenu(struct saa6752hs_state *h, return v4l2_ctrl_query_menu(qmenu, &qctrl, NULL); } -static int saa6752hs_init(struct i2c_client* client) +static int saa6752hs_init(struct i2c_client *client, u32 leading_null_bytes) { unsigned char buf[9], buf2[4]; struct saa6752hs_state *h; @@ -705,6 +705,12 @@ static int saa6752hs_init(struct i2c_client* client) buf[1] = 0x05; i2c_master_send(client,buf,2); + /* Set leading null byte for TS */ + buf[0] = 0xF6; + buf[1] = (leading_null_bytes >> 8) & 0xff; + buf[2] = leading_null_bytes & 0xff; + i2c_master_send(client, buf, 3); + /* compute PAT */ memcpy(localPAT, PAT, sizeof(PAT)); localPAT[17] = 0xe0 | ((h->params.ts_pid_pmt >> 8) & 0x0f); @@ -812,14 +818,13 @@ saa6752hs_command(struct i2c_client *client, unsigned int cmd, void *arg) int i; switch (cmd) { + case VIDIOC_INT_INIT: + /* apply settings and start encoder */ + saa6752hs_init(client, *(u32 *)arg); + break; case VIDIOC_S_EXT_CTRLS: if (ctrls->ctrl_class != V4L2_CTRL_CLASS_MPEG) return -EINVAL; - if (ctrls->count == 0) { - /* apply settings and start encoder */ - saa6752hs_init(client); - break; - } /* fall through */ case VIDIOC_TRY_EXT_CTRLS: case VIDIOC_G_EXT_CTRLS: diff --git a/drivers/media/video/saa7134/saa7134-empress.c b/drivers/media/video/saa7134/saa7134-empress.c index f5a186a..946edf6 100644 --- a/drivers/media/video/saa7134/saa7134-empress.c +++ b/drivers/media/video/saa7134/saa7134-empress.c @@ -64,10 +64,19 @@ static void ts_reset_encoder(struct saa7134_dev* dev) static int ts_init_encoder(struct saa7134_dev* dev) { - struct v4l2_ext_controls ctrls = { V4L2_CTRL_CLASS_MPEG, 0 }; - + u32 leading_null_bytes = 0; + + /* If more cards start to need this, then this + should probably be added to the card definitions. */ + switch (dev->board) { + case SAA7134_BOARD_BEHOLD_M6: + case SAA7134_BOARD_BEHOLD_M63: + case SAA7134_BOARD_BEHOLD_M6_EXTRA: + leading_null_bytes = 1; + break; + } ts_reset_encoder(dev); - saa7134_i2c_call_clients(dev, VIDIOC_S_EXT_CTRLS, &ctrls); + saa7134_i2c_call_clients(dev, VIDIOC_INT_INIT, &leading_null_bytes); dev->empress_started = 1; return 0; } -- cgit v0.10.2 From 8809b9cc8658d27c17d4fc07811b0ebd3f74f20c Mon Sep 17 00:00:00 2001 From: Dmitry Belimov Date: Tue, 26 Aug 2008 13:47:10 -0300 Subject: V4L/DVB (8796): saa7134-empress: remove incorrect IRQ defines for TS SAA7134_IRQ1_INTE_RA2_3 and SAA7134_IRQ1_INTE_RA2_2 are used for planar video, not for TS. Signed-off-by: Beholder Intl. Ltd. Dmitry Belimov Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/saa7134/saa7134-core.c b/drivers/media/video/saa7134/saa7134-core.c index 148aa81..12872c0 100644 --- a/drivers/media/video/saa7134/saa7134-core.c +++ b/drivers/media/video/saa7134/saa7134-core.c @@ -416,9 +416,7 @@ int saa7134_set_dmabits(struct saa7134_dev *dev) /* TS capture -- dma 5 */ if (dev->ts_q.curr) { ctrl |= SAA7134_MAIN_CTRL_TE5; - irq |= SAA7134_IRQ1_INTE_RA2_3 | - SAA7134_IRQ1_INTE_RA2_2 | - SAA7134_IRQ1_INTE_RA2_1 | + irq |= SAA7134_IRQ1_INTE_RA2_1 | SAA7134_IRQ1_INTE_RA2_0; } -- cgit v0.10.2 From 92c36147a7fdcead94f98c0a14f30d279653fa64 Mon Sep 17 00:00:00 2001 From: Dmitry Belimov Date: Tue, 26 Aug 2008 14:16:33 -0300 Subject: V4L/DVB (8797): A simple state machine was added to saa7134_ts. A simple state machine was added to saa7134_ts. It has three states: SAA7134_TS_STOPPED SAA7134_TS_BUFF_DONE SAA7134_TS_STARTED When buffer_setup is run we start the TS initialization: set SAA7134_TS_STOPPED. When all buffers are prepared we write data into DMA register and set SAA7134_TS_BUFF_DONE. When the first buffer is active start TS and set SAA7134_TS_STARTED. When ts_release is called stop TS and set SAA7134_TS_STOPPED. Signed-off-by: Beholder Intl. Ltd. Dmitry Belimov Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/saa7134/saa7134-ts.c b/drivers/media/video/saa7134/saa7134-ts.c index eae72fd..ef55a59 100644 --- a/drivers/media/video/saa7134/saa7134-ts.c +++ b/drivers/media/video/saa7134/saa7134-ts.c @@ -66,11 +66,29 @@ static int buffer_activate(struct saa7134_dev *dev, saa7134_set_dmabits(dev); mod_timer(&dev->ts_q.timeout, jiffies+BUFFER_TIMEOUT); + + if (dev->ts_state == SAA7134_TS_BUFF_DONE) { + /* Clear TS cache */ + dev->buff_cnt = 0; + saa_writeb(SAA7134_TS_SERIAL1, 0x00); + saa_writeb(SAA7134_TS_SERIAL1, 0x03); + saa_writeb(SAA7134_TS_SERIAL1, 0x00); + saa_writeb(SAA7134_TS_SERIAL1, 0x01); + + /* TS clock non-inverted */ + saa_writeb(SAA7134_TS_SERIAL1, 0x00); + + /* Start TS stream */ + saa_writeb(SAA7134_TS_SERIAL0, 0x40); + saa_writeb(SAA7134_TS_PARALLEL, 0xEC); + dev->ts_state = SAA7134_TS_STARTED; + } + return 0; } static int buffer_prepare(struct videobuf_queue *q, struct videobuf_buffer *vb, - enum v4l2_field field) + enum v4l2_field field) { struct saa7134_dev *dev = q->priv_data; struct saa7134_buf *buf = container_of(vb,struct saa7134_buf,vb); @@ -110,16 +128,22 @@ static int buffer_prepare(struct videobuf_queue *q, struct videobuf_buffer *vb, goto oops; } - /* dma: setup channel 5 (= TS) */ - control = SAA7134_RS_CONTROL_BURST_16 | - SAA7134_RS_CONTROL_ME | - (buf->pt->dma >> 12); - - saa_writeb(SAA7134_TS_DMA0, ((lines-1)&0xff)); - saa_writeb(SAA7134_TS_DMA1, (((lines-1)>>8)&0xff)); - saa_writeb(SAA7134_TS_DMA2, ((((lines-1)>>16)&0x3f) | 0x00)); /* TSNOPIT=0, TSCOLAP=0 */ - saa_writel(SAA7134_RS_PITCH(5),TS_PACKET_SIZE); - saa_writel(SAA7134_RS_CONTROL(5),control); + dev->buff_cnt++; + + if (dev->buff_cnt == dev->ts.nr_bufs) { + dev->ts_state = SAA7134_TS_BUFF_DONE; + /* dma: setup channel 5 (= TS) */ + control = SAA7134_RS_CONTROL_BURST_16 | + SAA7134_RS_CONTROL_ME | + (buf->pt->dma >> 12); + + saa_writeb(SAA7134_TS_DMA0, (lines - 1) & 0xff); + saa_writeb(SAA7134_TS_DMA1, ((lines - 1) >> 8) & 0xff); + /* TSNOPIT=0, TSCOLAP=0 */ + saa_writeb(SAA7134_TS_DMA2, (((lines - 1) >> 16) & 0x3f) | 0x00); + saa_writel(SAA7134_RS_PITCH(5), TS_PACKET_SIZE); + saa_writel(SAA7134_RS_CONTROL(5), control); + } buf->vb.state = VIDEOBUF_PREPARED; buf->activate = buffer_activate; @@ -140,6 +164,8 @@ buffer_setup(struct videobuf_queue *q, unsigned int *count, unsigned int *size) if (0 == *count) *count = dev->ts.nr_bufs; *count = saa7134_buffer_count(*size,*count); + dev->buff_cnt = 0; + dev->ts_state = SAA7134_TS_STOPPED; return 0; } @@ -154,7 +180,13 @@ static void buffer_queue(struct videobuf_queue *q, struct videobuf_buffer *vb) static void buffer_release(struct videobuf_queue *q, struct videobuf_buffer *vb) { struct saa7134_buf *buf = container_of(vb,struct saa7134_buf,vb); + struct saa7134_dev *dev = q->priv_data; + if (dev->ts_state == SAA7134_TS_STARTED) { + /* Stop TS transport */ + saa_writeb(SAA7134_TS_PARALLEL, 0x6c); + dev->ts_state = SAA7134_TS_STOPPED; + } saa7134_dma_free(q,buf); } @@ -182,7 +214,7 @@ int saa7134_ts_init_hw(struct saa7134_dev *dev) /* deactivate TS softreset */ saa_writeb(SAA7134_TS_SERIAL1, 0x00); /* TSSOP high active, TSVAL high active, TSLOCK ignored */ - saa_writeb(SAA7134_TS_PARALLEL, 0xec); + saa_writeb(SAA7134_TS_PARALLEL, 0x6c); saa_writeb(SAA7134_TS_PARALLEL_SERIAL, (TS_PACKET_SIZE-1)); saa_writeb(SAA7134_TS_DMA0, ((dev->ts.nr_packets-1)&0xff)); saa_writeb(SAA7134_TS_DMA1, (((dev->ts.nr_packets-1)>>8)&0xff)); diff --git a/drivers/media/video/saa7134/saa7134.h b/drivers/media/video/saa7134/saa7134.h index a0884f6..a1e0dad 100644 --- a/drivers/media/video/saa7134/saa7134.h +++ b/drivers/media/video/saa7134/saa7134.h @@ -462,6 +462,12 @@ struct saa7134_mpeg_ops { void (*signal_change)(struct saa7134_dev *dev); }; +enum saa7134_ts_status { + SAA7134_TS_STOPPED, + SAA7134_TS_BUFF_DONE, + SAA7134_TS_STARTED, +}; + /* global device status */ struct saa7134_dev { struct list_head devlist; @@ -555,6 +561,8 @@ struct saa7134_dev { /* SAA7134_MPEG_* */ struct saa7134_ts ts; struct saa7134_dmaqueue ts_q; + enum saa7134_ts_status ts_state; + unsigned int buff_cnt; struct saa7134_mpeg_ops *mops; struct i2c_client *mpeg_i2c_client; -- cgit v0.10.2 From 28531558006d5c525b19a207a7ab4ec0643191c9 Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Fri, 29 Aug 2008 15:16:31 -0300 Subject: V4L/DVB (8799): soc-camera: add API documentation Signed-off-by: Guennadi Liakhovetski Acked-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab diff --git a/Documentation/video4linux/soc-camera.txt b/Documentation/video4linux/soc-camera.txt new file mode 100644 index 0000000..178ef3c --- /dev/null +++ b/Documentation/video4linux/soc-camera.txt @@ -0,0 +1,120 @@ + Soc-Camera Subsystem + ==================== + +Terminology +----------- + +The following terms are used in this document: + - camera / camera device / camera sensor - a video-camera sensor chip, capable + of connecting to a variety of systems and interfaces, typically uses i2c for + control and configuration, and a parallel or a serial bus for data. + - camera host - an interface, to which a camera is connected. Typically a + specialised interface, present on many SoCs, e.g., PXA27x and PXA3xx, SuperH, + AVR32, i.MX27, i.MX31. + - camera host bus - a connection between a camera host and a camera. Can be + parallel or serial, consists of data and control lines, e.g., clock, vertical + and horizontal synchronization signals. + +Purpose of the soc-camera subsystem +----------------------------------- + +The soc-camera subsystem provides a unified API between camera host drivers and +camera sensor drivers. It implements a V4L2 interface to the user, currently +only the mmap method is supported. + +This subsystem has been written to connect drivers for System-on-Chip (SoC) +video capture interfaces with drivers for CMOS camera sensor chips to enable +the reuse of sensor drivers with various hosts. The subsystem has been designed +to support multiple camera host interfaces and multiple cameras per interface, +although most applications have only one camera sensor. + +Existing drivers +---------------- + +As of 2.6.27-rc4 there are two host drivers in the mainline: pxa_camera.c for +PXA27x SoCs and sh_mobile_ceu_camera.c for SuperH SoCs, and four sensor drivers: +mt9m001.c, mt9m111.c, mt9v022.c and a generic soc_camera_platform.c driver. This +list is not supposed to be updated, look for more examples in your tree. + +Camera host API +--------------- + +A host camera driver is registered using the + +soc_camera_host_register(struct soc_camera_host *); + +function. The host object can be initialized as follows: + +static struct soc_camera_host pxa_soc_camera_host = { + .drv_name = PXA_CAM_DRV_NAME, + .ops = &pxa_soc_camera_host_ops, +}; + +All camera host methods are passed in a struct soc_camera_host_ops: + +static struct soc_camera_host_ops pxa_soc_camera_host_ops = { + .owner = THIS_MODULE, + .add = pxa_camera_add_device, + .remove = pxa_camera_remove_device, + .suspend = pxa_camera_suspend, + .resume = pxa_camera_resume, + .set_fmt_cap = pxa_camera_set_fmt_cap, + .try_fmt_cap = pxa_camera_try_fmt_cap, + .init_videobuf = pxa_camera_init_videobuf, + .reqbufs = pxa_camera_reqbufs, + .poll = pxa_camera_poll, + .querycap = pxa_camera_querycap, + .try_bus_param = pxa_camera_try_bus_param, + .set_bus_param = pxa_camera_set_bus_param, +}; + +.add and .remove methods are called when a sensor is attached to or detached +from the host, apart from performing host-internal tasks they shall also call +sensor driver's .init and .release methods respectively. .suspend and .resume +methods implement host's power-management functionality and its their +responsibility to call respective sensor's methods. .try_bus_param and +.set_bus_param are used to negotiate physical connection parameters between the +host and the sensor. .init_videobuf is called by soc-camera core when a +video-device is opened, further video-buffer management is implemented completely +by the specific camera host driver. The rest of the methods are called from +respective V4L2 operations. + +Camera API +---------- + +Sensor drivers can use struct soc_camera_link, typically provided by the +platform, and used to specify to which camera host bus the sensor is connected, +and arbitrarily provide platform .power and .reset methods for the camera. +soc_camera_device_register() and soc_camera_device_unregister() functions are +used to add a sensor driver to or remove one from the system. The registration +function takes a pointer to struct soc_camera_device as the only parameter. +This struct can be initialized as follows: + + /* link to driver operations */ + icd->ops = &mt9m001_ops; + /* link to the underlying physical (e.g., i2c) device */ + icd->control = &client->dev; + /* window geometry */ + icd->x_min = 20; + icd->y_min = 12; + icd->x_current = 20; + icd->y_current = 12; + icd->width_min = 48; + icd->width_max = 1280; + icd->height_min = 32; + icd->height_max = 1024; + icd->y_skip_top = 1; + /* camera bus ID, typically obtained from platform data */ + icd->iface = icl->bus_id; + +struct soc_camera_ops provides .probe and .remove methods, which are called by +the soc-camera core, when a camera is matched against or removed from a camera +host bus, .init, .release, .suspend, and .resume are called from the camera host +driver as discussed above. Other members of this struct provide respective V4L2 +functionality. + +struct soc_camera_device also links to an array of struct soc_camera_data_format, +listing pixel formats, supported by the camera. + +-- +Author: Guennadi Liakhovetski -- cgit v0.10.2 From ba77531f51d59a4ca4e5f9b5960301f7dc7a5390 Mon Sep 17 00:00:00 2001 From: Harvey Harrison Date: Wed, 27 Aug 2008 17:20:01 -0300 Subject: V4L/DVB (8800): [v4l-dvb-maintainer] [PATCH] v4l: mt9m111.c make function static drivers/media/video/mt9m111.c:758:5: warning: symbol 'mt9m111_restore_state' was not declared. Should it be static? New warning in next-20080825 Signed-off-by: Harvey Harrison Signed-off-by: Guennadi Liakhovetski Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/mt9m111.c b/drivers/media/video/mt9m111.c index 4844486..da0b2d5 100644 --- a/drivers/media/video/mt9m111.c +++ b/drivers/media/video/mt9m111.c @@ -755,7 +755,7 @@ static int mt9m111_set_control(struct soc_camera_device *icd, return ret; } -int mt9m111_restore_state(struct soc_camera_device *icd) +static int mt9m111_restore_state(struct soc_camera_device *icd) { struct mt9m111 *mt9m111 = container_of(icd, struct mt9m111, icd); -- cgit v0.10.2 From 4c56b04af67211c4311dd9961ce5aba86b96ba9c Mon Sep 17 00:00:00 2001 From: Steven Toth Date: Tue, 12 Aug 2008 13:30:03 -0300 Subject: V4L/DVB (8807): Add DVB support for the Leadtek Winfast PxDVR3200 H This patch is on behalf of Stephen Backway , and represents two patches I received (and some subsequent whitespace cleanup I had due to how I pulled the patches). From the original author: a) Add DVB support for the Leadtek Winfast PxDVR3200 H. b) The tuner callback previously checked the command 3 times: 1) To see if it was the XC2028_RESET_CLK 2) To see if it was not the XC2028_RESET_TUNER 3) To see if it was the XC2028_RESET_TUNER This patch removes the third check. Signed-off-by: Steven Toth Signed-off-by: Stephen Backway Signed-off-by: Mauro Carvalho Chehab diff --git a/Documentation/video4linux/CARDLIST.cx23885 b/Documentation/video4linux/CARDLIST.cx23885 index bccafd3..64823cc 100644 --- a/Documentation/video4linux/CARDLIST.cx23885 +++ b/Documentation/video4linux/CARDLIST.cx23885 @@ -10,3 +10,4 @@ 9 -> Hauppauge WinTV-HVR1400 [0070:8010] 10 -> DViCO FusionHDTV7 Dual Express [18ac:d618] 11 -> DViCO FusionHDTV DVB-T Dual Express [18ac:db78] + 12 -> Leadtek Winfast PxDVR3200 H [107d:6681] diff --git a/drivers/media/video/cx23885/Kconfig b/drivers/media/video/cx23885/Kconfig index e60bd31..8c1b7fa4 100644 --- a/drivers/media/video/cx23885/Kconfig +++ b/drivers/media/video/cx23885/Kconfig @@ -15,6 +15,7 @@ config VIDEO_CX23885 select DVB_S5H1409 if !DVB_FE_CUSTOMISE select DVB_S5H1411 if !DVB_FE_CUSTOMISE select DVB_LGDT330X if !DVB_FE_CUSTOMISE + select DVB_ZL10353 if !DVB_FE_CUSTOMISE select MEDIA_TUNER_XC2028 if !DVB_FE_CUSTOMIZE select MEDIA_TUNER_TDA8290 if !DVB_FE_CUSTOMIZE select MEDIA_TUNER_TDA18271 if !DVB_FE_CUSTOMIZE diff --git a/drivers/media/video/cx23885/cx23885-cards.c b/drivers/media/video/cx23885/cx23885-cards.c index 0daffc3..ccea8de 100644 --- a/drivers/media/video/cx23885/cx23885-cards.c +++ b/drivers/media/video/cx23885/cx23885-cards.c @@ -154,6 +154,10 @@ struct cx23885_board cx23885_boards[] = { .portb = CX23885_MPEG_DVB, .portc = CX23885_MPEG_DVB, }, + [CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H] = { + .name = "Leadtek Winfast PxDVR3200 H", + .portc = CX23885_MPEG_DVB, + }, }; const unsigned int cx23885_bcount = ARRAY_SIZE(cx23885_boards); @@ -229,6 +233,10 @@ struct cx23885_subid cx23885_subids[] = { .subvendor = 0x18ac, .subdevice = 0xdb78, .card = CX23885_BOARD_DVICO_FUSIONHDTV_DVB_T_DUAL_EXP, + }, { + .subvendor = 0x107d, + .subdevice = 0x6681, + .card = CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H, }, }; const unsigned int cx23885_idcount = ARRAY_SIZE(cx23885_subids); @@ -348,21 +356,18 @@ int cx23885_tuner_callback(void *priv, int command, int arg) case CX23885_BOARD_HAUPPAUGE_HVR1400: case CX23885_BOARD_HAUPPAUGE_HVR1500: case CX23885_BOARD_HAUPPAUGE_HVR1500Q: + case CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H: /* Tuner Reset Command */ - if (command == 0) - bitmask = 0x04; + bitmask = 0x04; break; case CX23885_BOARD_DVICO_FUSIONHDTV_7_DUAL_EXP: case CX23885_BOARD_DVICO_FUSIONHDTV_DVB_T_DUAL_EXP: - if (command == 0) { - - /* Two identical tuners on two different i2c buses, - * we need to reset the correct gpio. */ - if (port->nr == 0) - bitmask = 0x01; - else if (port->nr == 1) - bitmask = 0x04; - } + /* Two identical tuners on two different i2c buses, + * we need to reset the correct gpio. */ + if (port->nr == 0) + bitmask = 0x01; + else if (port->nr == 1) + bitmask = 0x04; break; } @@ -491,6 +496,19 @@ void cx23885_gpio_setup(struct cx23885_dev *dev) mdelay(20); cx_set(GP0_IO, 0x000f000f); break; + case CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H: + /* GPIO-2 xc3028 tuner reset */ + + /* The following GPIO's are on the internal AVCore (cx25840) */ + /* GPIO-? zl10353 demod reset */ + + /* Put the parts into reset and back */ + cx_set(GP0_IO, 0x00040000); + mdelay(20); + cx_clear(GP0_IO, 0x00000004); + mdelay(20); + cx_set(GP0_IO, 0x00040004); + break; } } @@ -578,6 +596,7 @@ void cx23885_card_setup(struct cx23885_dev *dev) case CX23885_BOARD_HAUPPAUGE_HVR1200: case CX23885_BOARD_HAUPPAUGE_HVR1700: case CX23885_BOARD_HAUPPAUGE_HVR1400: + case CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H: default: ts2->gen_ctrl_val = 0xc; /* Serial bus + punctured clock */ ts2->ts_clk_en_val = 0x1; /* Enable TS_CLK */ @@ -591,6 +610,7 @@ void cx23885_card_setup(struct cx23885_dev *dev) case CX23885_BOARD_HAUPPAUGE_HVR1800: case CX23885_BOARD_HAUPPAUGE_HVR1800lp: case CX23885_BOARD_HAUPPAUGE_HVR1700: + case CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H: request_module("cx25840"); break; } diff --git a/drivers/media/video/cx23885/cx23885-dvb.c b/drivers/media/video/cx23885/cx23885-dvb.c index f8564bb..b85cb39 100644 --- a/drivers/media/video/cx23885/cx23885-dvb.c +++ b/drivers/media/video/cx23885/cx23885-dvb.c @@ -501,6 +501,32 @@ static int dvb_register(struct cx23885_tsport *port) } break; } + case CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H: + i2c_bus = &dev->i2c_bus[0]; + + port->dvb.frontend = dvb_attach(zl10353_attach, + &dvico_fusionhdtv_xc3028, + &i2c_bus->i2c_adap); + if (port->dvb.frontend != NULL) { + struct dvb_frontend *fe; + struct xc2028_config cfg = { + .i2c_adap = &dev->i2c_bus[1].i2c_adap, + .i2c_addr = 0x61, + .video_dev = port, + .callback = cx23885_tuner_callback, + }; + static struct xc2028_ctrl ctl = { + .fname = "xc3028-v27.fw", + .max_len = 64, + .demod = XC3028_FE_ZARLINK456, + }; + + fe = dvb_attach(xc2028_attach, port->dvb.frontend, + &cfg); + if (fe != NULL && fe->ops.tuner_ops.set_config != NULL) + fe->ops.tuner_ops.set_config(fe, &ctl); + } + break; default: printk("%s: The frontend of your DVB/ATSC card isn't supported yet\n", dev->name); diff --git a/drivers/media/video/cx23885/cx23885.h b/drivers/media/video/cx23885/cx23885.h index db52d81..4e0fcb3 100644 --- a/drivers/media/video/cx23885/cx23885.h +++ b/drivers/media/video/cx23885/cx23885.h @@ -65,6 +65,7 @@ #define CX23885_BOARD_HAUPPAUGE_HVR1400 9 #define CX23885_BOARD_DVICO_FUSIONHDTV_7_DUAL_EXP 10 #define CX23885_BOARD_DVICO_FUSIONHDTV_DVB_T_DUAL_EXP 11 +#define CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H 12 /* Currently unsupported by the driver: PAL/H, NTSC/Kr, SECAM B/G/H/LC */ #define CX23885_NORMS (\ -- cgit v0.10.2 From abc94fc8feb1488079dd7dd46bd61d37d91c5658 Mon Sep 17 00:00:00 2001 From: David Howells Date: Wed, 27 Aug 2008 10:46:39 -0300 Subject: V4L/DVB (8838): CRED: Wrap task credential accesses in video input drivers Wrap access to task credentials so that they can be separated more easily from the task_struct during the introduction of COW creds. Change most current->(|e|s|fs)[ug]id to current_(|e|s|fs)[ug]id(). Change some task->e?[ug]id to task_e?[ug]id(). In some places it makes more sense to use RCU directly rather than a convenient wrapper; these will be addressed by later patches. Signed-off-by: David Howells Reviewed-by: James Morris Acked-by: Serge Hallyn Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/cpia.c b/drivers/media/video/cpia.c index b14c59c..c325e92 100644 --- a/drivers/media/video/cpia.c +++ b/drivers/media/video/cpia.c @@ -3202,7 +3202,7 @@ static int cpia_open(struct inode *inode, struct file *file) /* Set ownership of /proc/cpia/videoX to current user */ if(cam->proc_entry) - cam->proc_entry->uid = current->uid; + cam->proc_entry->uid = current_uid(); /* set mark for loading first frame uncompressed */ cam->first_frame = 1; -- cgit v0.10.2 From 22b88d48a08e334d36218ca166749c4e6d644f0c Mon Sep 17 00:00:00 2001 From: Dean Anderson Date: Fri, 29 Aug 2008 15:33:19 -0300 Subject: V4L/DVB (8845): s2255drv: adds JPEG compression quality control adds VIDIOC_S_JPEGCOMP and VIDIOC_G_JPEGCOMP ioctls for controlling JPEG compression quality. Signed-off-by: Dean Anderson Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/s2255drv.c b/drivers/media/video/s2255drv.c index ea40f4c..b8e1045 100644 --- a/drivers/media/video/s2255drv.c +++ b/drivers/media/video/s2255drv.c @@ -58,6 +58,8 @@ +/* default JPEG quality */ +#define S2255_DEF_JPEG_QUAL 50 /* vendor request in */ #define S2255_VR_IN 0 /* vendor request out */ @@ -242,6 +244,8 @@ struct s2255_dev { struct s2255_pipeinfo pipes[MAX_PIPE_BUFFERS]; struct s2255_bufferi buffer[MAX_CHANNELS]; struct s2255_mode mode[MAX_CHANNELS]; + /* jpeg compression */ + struct v4l2_jpegcompression jc[MAX_CHANNELS]; const struct s2255_fmt *cur_fmt[MAX_CHANNELS]; int cur_frame[MAX_CHANNELS]; int last_frame[MAX_CHANNELS]; @@ -1035,7 +1039,8 @@ static int vidioc_s_fmt_vid_cap(struct file *file, void *priv, fh->mode.color = COLOR_Y8; break; case V4L2_PIX_FMT_JPEG: - fh->mode.color = COLOR_JPG | (50 << 8); + fh->mode.color = COLOR_JPG | + (fh->dev->jc[fh->channel].quality << 8); break; case V4L2_PIX_FMT_YUV422P: fh->mode.color = COLOR_YUVPL; @@ -1208,6 +1213,10 @@ static int s2255_set_mode(struct s2255_dev *dev, unsigned long chn, dev->mode[chn].scale); dprintk(2, "mode contrast %x\n", mode->contrast); + /* if JPEG, set the quality */ + if ((mode->color & MASK_COLOR) == COLOR_JPG) + mode->color = (dev->jc[chn].quality << 8) | COLOR_JPG; + /* save the mode */ dev->mode[chn] = *mode; dev->req_image_size[chn] = get_transfer_size(mode); @@ -1472,6 +1481,27 @@ static int vidioc_s_ctrl(struct file *file, void *priv, return -EINVAL; } +static int vidioc_g_jpegcomp(struct file *file, void *priv, + struct v4l2_jpegcompression *jc) +{ + struct s2255_fh *fh = priv; + struct s2255_dev *dev = fh->dev; + *jc = dev->jc[fh->channel]; + dprintk(2, "getting jpegcompression, quality %d\n", jc->quality); + return 0; +} + +static int vidioc_s_jpegcomp(struct file *file, void *priv, + struct v4l2_jpegcompression *jc) +{ + struct s2255_fh *fh = priv; + struct s2255_dev *dev = fh->dev; + if (jc->quality < 0 || jc->quality > 100) + return -EINVAL; + dev->jc[fh->channel].quality = jc->quality; + dprintk(2, "setting jpeg quality %d\n", jc->quality); + return 0; +} static int s2255_open(struct inode *inode, struct file *file) { int minor = iminor(inode); @@ -1762,6 +1792,8 @@ static const struct v4l2_ioctl_ops s2255_ioctl_ops = { #ifdef CONFIG_VIDEO_V4L1_COMPAT .vidiocgmbuf = vidioc_cgmbuf, #endif + .vidioc_s_jpegcomp = vidioc_s_jpegcomp, + .vidioc_g_jpegcomp = vidioc_g_jpegcomp, }; static struct video_device template = { @@ -2148,6 +2180,7 @@ static int s2255_board_init(struct s2255_dev *dev) for (j = 0; j < MAX_CHANNELS; j++) { dev->b_acquire[j] = 0; dev->mode[j] = mode_def; + dev->jc[j].quality = S2255_DEF_JPEG_QUAL; dev->cur_fmt[j] = &formats[0]; dev->mode[j].restart = 1; dev->req_image_size[j] = get_transfer_size(&mode_def); -- cgit v0.10.2 From 08ebd003d90955d78b58bb348a098fee301b8a82 Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Fri, 29 Aug 2008 17:37:44 -0300 Subject: V4L/DVB (8846): uvcvideo: Supress spurious "EOF in empty payload" trace message Pass the payload size instead of the header size to uvc_video_decode_end() to avoid generating an extra trace message for each frame. Signed-off-by: Laurent Pinchart Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/uvc/uvc_video.c b/drivers/media/video/uvc/uvc_video.c index 03dc3a5..593aebf 100644 --- a/drivers/media/video/uvc/uvc_video.c +++ b/drivers/media/video/uvc/uvc_video.c @@ -455,7 +455,8 @@ static void uvc_video_decode_isoc(struct urb *urb, urb->iso_frame_desc[i].actual_length - ret); /* Process the header again. */ - uvc_video_decode_end(video, buf, mem, ret); + uvc_video_decode_end(video, buf, mem, + urb->iso_frame_desc[i].actual_length); if (buf->state == UVC_BUF_STATE_DONE || buf->state == UVC_BUF_STATE_ERROR) @@ -512,7 +513,7 @@ static void uvc_video_decode_bulk(struct urb *urb, video->bulk.payload_size >= video->bulk.max_payload_size) { if (!video->bulk.skip_payload && buf != NULL) { uvc_video_decode_end(video, buf, video->bulk.header, - video->bulk.header_size); + video->bulk.payload_size); if (buf->state == UVC_BUF_STATE_DONE || buf->state == UVC_BUF_STATE_ERROR) buf = uvc_queue_next_buffer(&video->queue, buf); -- cgit v0.10.2 From 4e08caf0cb85c4f63ddaf72a67d95fba8528e04e Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Fri, 29 Aug 2008 17:57:10 -0300 Subject: V4L/DVB (8847): uvcvideo: Add support for a Bison Electronics webcam found in the Fujitsu Amilo SI2636. Signed-off-by: Laurent Pinchart Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/uvc/uvc_driver.c b/drivers/media/video/uvc/uvc_driver.c index 4a2d099..4ab4d1e 100644 --- a/drivers/media/video/uvc/uvc_driver.c +++ b/drivers/media/video/uvc/uvc_driver.c @@ -1930,6 +1930,15 @@ static struct usb_device_id uvc_ids[] = { .bInterfaceSubClass = 1, .bInterfaceProtocol = 0, .driver_info = UVC_QUIRK_PROBE_MINMAX }, + /* Fujitsu Amilo SI2636 - Bison Electronics */ + { .match_flags = USB_DEVICE_ID_MATCH_DEVICE + | USB_DEVICE_ID_MATCH_INT_INFO, + .idVendor = 0x5986, + .idProduct = 0x0202, + .bInterfaceClass = USB_CLASS_VIDEO, + .bInterfaceSubClass = 1, + .bInterfaceProtocol = 0, + .driver_info = UVC_QUIRK_PROBE_MINMAX }, /* Bison Electronics */ { .match_flags = USB_DEVICE_ID_MATCH_DEVICE | USB_DEVICE_ID_MATCH_INT_INFO, -- cgit v0.10.2 From 187565c43a95bcf7798c58d518ddd765933d24da Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Sat, 30 Aug 2008 06:03:09 -0300 Subject: V4L/DVB (8850): bt856: fix define conflict Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/bt856.c b/drivers/media/video/bt856.c index 98ee2d8..ab2ce4d 100644 --- a/drivers/media/video/bt856.c +++ b/drivers/media/video/bt856.c @@ -68,8 +68,8 @@ MODULE_PARM_DESC(debug, "Debug level (0-1)"); /* ----------------------------------------------------------------------- */ -#define REG_OFFSET 0xDA -#define BT856_NR_REG 6 +#define BT856_REG_OFFSET 0xDA +#define BT856_NR_REG 6 struct bt856 { unsigned char reg[BT856_NR_REG]; @@ -89,7 +89,7 @@ bt856_write (struct i2c_client *client, { struct bt856 *encoder = i2c_get_clientdata(client); - encoder->reg[reg - REG_OFFSET] = value; + encoder->reg[reg - BT856_REG_OFFSET] = value; return i2c_smbus_write_byte_data(client, reg, value); } @@ -103,7 +103,7 @@ bt856_setbit (struct i2c_client *client, return bt856_write(client, reg, (encoder-> - reg[reg - REG_OFFSET] & ~(1 << bit)) | + reg[reg - BT856_REG_OFFSET] & ~(1 << bit)) | (value ? (1 << bit) : 0)); } -- cgit v0.10.2 From 7f8ecfab7a1d256707502207c56dd4bf3e3a026e Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Fri, 29 Aug 2008 17:31:35 -0300 Subject: V4L/DVB (8852): v4l2: use register_chrdev_region instead of register_chrdev Replace the old register_chrdev with the more flexible register_chrdev_region. Ensure that the release() is called when the very last chardev usage was released, and not when the sysfs devices were removed. This should simplify hotpluggable drivers considerably. Tested-by: Mike Isely Tested-by: Laurent Pinchart Signed-off-by: Hans Verkuil Acked-by: David Ellingsworth Reviewed-by: Hans de Goede Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/v4l2-dev.c b/drivers/media/video/v4l2-dev.c index 99f7ee4..02b9cc7 100644 --- a/drivers/media/video/v4l2-dev.c +++ b/drivers/media/video/v4l2-dev.c @@ -60,6 +60,12 @@ static struct device_attribute video_device_attrs[] = { __ATTR_NULL }; +/* + * Active devices + */ +static struct video_device *video_device[VIDEO_NUM_DEVICES]; +static DEFINE_MUTEX(videodev_lock); + struct video_device *video_device_alloc(void) { return kzalloc(sizeof(struct video_device), GFP_KERNEL); @@ -79,11 +85,41 @@ void video_device_release_empty(struct video_device *vfd) } EXPORT_SYMBOL(video_device_release_empty); +/* Called when the last user of the character device is gone. */ +static void v4l2_chardev_release(struct kobject *kobj) +{ + struct video_device *vfd = container_of(kobj, struct video_device, cdev.kobj); + + mutex_lock(&videodev_lock); + if (video_device[vfd->minor] != vfd) + panic("videodev: bad release"); + + /* Free up this device for reuse */ + video_device[vfd->minor] = NULL; + mutex_unlock(&videodev_lock); + + /* Release the character device */ + vfd->cdev_release(kobj); + /* Release video_device and perform other + cleanups as needed. */ + if (vfd->release) + vfd->release(vfd); +} + +/* The new kobj_type for the character device */ +static struct kobj_type v4l2_ktype_cdev_default = { + .release = v4l2_chardev_release, +}; + static void video_release(struct device *cd) { struct video_device *vfd = container_of(cd, struct video_device, dev); - vfd->release(vfd); + /* It's now safe to delete the char device. + This will either trigger the v4l2_chardev_release immediately (if + the refcount goes to 0) or later when the last user of the + character device closes it. */ + cdev_del(&vfd->cdev); } static struct class video_class = { @@ -92,56 +128,12 @@ static struct class video_class = { .dev_release = video_release, }; -/* - * Active devices - */ - -static struct video_device *video_device[VIDEO_NUM_DEVICES]; -static DEFINE_MUTEX(videodev_lock); - struct video_device *video_devdata(struct file *file) { return video_device[iminor(file->f_path.dentry->d_inode)]; } EXPORT_SYMBOL(video_devdata); -/* - * Open a video device - FIXME: Obsoleted - */ -static int video_open(struct inode *inode, struct file *file) -{ - unsigned int minor = iminor(inode); - int err = 0; - struct video_device *vfl; - const struct file_operations *old_fops; - - if (minor >= VIDEO_NUM_DEVICES) - return -ENODEV; - mutex_lock(&videodev_lock); - vfl = video_device[minor]; - if (vfl == NULL) { - mutex_unlock(&videodev_lock); - request_module("char-major-%d-%d", VIDEO_MAJOR, minor); - mutex_lock(&videodev_lock); - vfl = video_device[minor]; - if (vfl == NULL) { - mutex_unlock(&videodev_lock); - return -ENODEV; - } - } - old_fops = file->f_op; - file->f_op = fops_get(vfl->fops); - if (file->f_op->open) - err = file->f_op->open(inode, file); - if (err) { - fops_put(file->f_op); - file->f_op = fops_get(old_fops); - } - fops_put(old_fops); - mutex_unlock(&videodev_lock); - return err; -} - /** * get_index - assign stream number based on parent device * @vdev: video_device to assign index number to, vdev->dev should be assigned @@ -261,6 +253,9 @@ int video_register_device_index(struct video_device *vfd, int type, int nr, return -EINVAL; } + /* Initialize the character device */ + cdev_init(&vfd->cdev, vfd->fops); + vfd->cdev.owner = vfd->fops->owner; /* pick a minor number */ mutex_lock(&videodev_lock); if (nr >= 0 && nr < end-base) { @@ -294,6 +289,11 @@ int video_register_device_index(struct video_device *vfd, int type, int nr, goto fail_minor; } + ret = cdev_add(&vfd->cdev, MKDEV(VIDEO_MAJOR, vfd->minor), 1); + if (ret < 0) { + printk(KERN_ERR "%s: cdev_add failed\n", __func__); + goto fail_minor; + } /* sysfs class */ memset(&vfd->dev, 0, sizeof(vfd->dev)); /* The memset above cleared the device's drvdata, so @@ -307,11 +307,17 @@ int video_register_device_index(struct video_device *vfd, int type, int nr, ret = device_register(&vfd->dev); if (ret < 0) { printk(KERN_ERR "%s: device_register failed\n", __func__); - goto fail_minor; + goto del_cdev; } - + /* Remember the cdev's release function */ + vfd->cdev_release = vfd->cdev.kobj.ktype->release; + /* Install our own */ + vfd->cdev.kobj.ktype = &v4l2_ktype_cdev_default; return 0; +del_cdev: + cdev_del(&vfd->cdev); + fail_minor: mutex_lock(&videodev_lock); video_device[vfd->minor] = NULL; @@ -331,42 +337,29 @@ EXPORT_SYMBOL(video_register_device_index); void video_unregister_device(struct video_device *vfd) { - mutex_lock(&videodev_lock); - if (video_device[vfd->minor] != vfd) - panic("videodev: bad unregister"); - - video_device[vfd->minor] = NULL; device_unregister(&vfd->dev); - mutex_unlock(&videodev_lock); } EXPORT_SYMBOL(video_unregister_device); /* - * Video fs operations - */ -static const struct file_operations video_fops = { - .owner = THIS_MODULE, - .llseek = no_llseek, - .open = video_open, -}; - -/* * Initialise video for linux */ - static int __init videodev_init(void) { + dev_t dev = MKDEV(VIDEO_MAJOR, 0); int ret; printk(KERN_INFO "Linux video capture interface: v2.00\n"); - if (register_chrdev(VIDEO_MAJOR, VIDEO_NAME, &video_fops)) { - printk(KERN_WARNING "video_dev: unable to get major %d\n", VIDEO_MAJOR); - return -EIO; + ret = register_chrdev_region(dev, VIDEO_NUM_DEVICES, VIDEO_NAME); + if (ret < 0) { + printk(KERN_WARNING "videodev: unable to get major %d\n", + VIDEO_MAJOR); + return ret; } ret = class_register(&video_class); if (ret < 0) { - unregister_chrdev(VIDEO_MAJOR, VIDEO_NAME); + unregister_chrdev_region(dev, VIDEO_NUM_DEVICES); printk(KERN_WARNING "video_dev: class_register failed\n"); return -EIO; } @@ -376,8 +369,10 @@ static int __init videodev_init(void) static void __exit videodev_exit(void) { + dev_t dev = MKDEV(VIDEO_MAJOR, 0); + class_unregister(&video_class); - unregister_chrdev(VIDEO_MAJOR, VIDEO_NAME); + unregister_chrdev_region(dev, VIDEO_NUM_DEVICES); } module_init(videodev_init) diff --git a/include/media/v4l2-dev.h b/include/media/v4l2-dev.h index fb92e3d..d129b56 100644 --- a/include/media/v4l2-dev.h +++ b/include/media/v4l2-dev.h @@ -12,6 +12,7 @@ #include #include #include +#include #include #include @@ -47,6 +48,8 @@ struct video_device /* sysfs */ struct device dev; /* v4l device */ + struct cdev cdev; /* character device */ + void (*cdev_release)(struct kobject *kobj); struct device *parent; /* device parent */ /* device info */ -- cgit v0.10.2 From 20c104d0a4d055cfa3df4fcbae818f8e10bd541a Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Sat, 30 Aug 2008 08:21:13 -0300 Subject: V4L/DVB (8856): v4l: fix assorted compile warnings/errors BIT define conflicts on kernels < 2.6.24, byteorder/swab.h doesn't need to be included at all. Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/cx18/cx18-driver.h b/drivers/media/video/cx18/cx18-driver.h index 2635989..7bdd2fc 100644 --- a/drivers/media/video/cx18/cx18-driver.h +++ b/drivers/media/video/cx18/cx18-driver.h @@ -38,7 +38,6 @@ #include #include #include -#include #include #include #include diff --git a/drivers/media/video/cx18/cx18-i2c.c b/drivers/media/video/cx18/cx18-i2c.c index 6023ba3..7d8fb25 100644 --- a/drivers/media/video/cx18/cx18-i2c.c +++ b/drivers/media/video/cx18/cx18-i2c.c @@ -27,8 +27,6 @@ #include "cx18-av-core.h" #include "cx18-i2c.h" -#include - #define CX18_REG_I2C_1_WR 0xf15000 #define CX18_REG_I2C_1_RD 0xf15008 #define CX18_REG_I2C_2_WR 0xf25100 diff --git a/drivers/media/video/ivtv/ivtv-driver.h b/drivers/media/video/ivtv/ivtv-driver.h index 2ceb522..b76a122 100644 --- a/drivers/media/video/ivtv/ivtv-driver.h +++ b/drivers/media/video/ivtv/ivtv-driver.h @@ -49,7 +49,6 @@ #include #include #include -#include #include #include #include diff --git a/drivers/media/video/ivtv/ivtv-i2c.c b/drivers/media/video/ivtv/ivtv-i2c.c index af15423..24700c2 100644 --- a/drivers/media/video/ivtv/ivtv-i2c.c +++ b/drivers/media/video/ivtv/ivtv-i2c.c @@ -64,8 +64,6 @@ #include "ivtv-gpio.h" #include "ivtv-i2c.h" -#include - /* i2c implementation for cx23415/6 chip, ivtv project. * Author: Kevin Thayer (nufan_wfk at yahoo.com) */ diff --git a/drivers/media/video/vpx3220.c b/drivers/media/video/vpx3220.c index 35293029..45be9ec 100644 --- a/drivers/media/video/vpx3220.c +++ b/drivers/media/video/vpx3220.c @@ -24,8 +24,6 @@ #include #include -#include - #include #include -- cgit v0.10.2 From 6ea9a1829a89515c1866151b1fdca7ee612d1490 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Sat, 30 Aug 2008 09:40:47 -0300 Subject: V4L/DVB (8857): v4l2-dev: replace panic with BUG Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/v4l2-dev.c b/drivers/media/video/v4l2-dev.c index 02b9cc7..7addf2f 100644 --- a/drivers/media/video/v4l2-dev.c +++ b/drivers/media/video/v4l2-dev.c @@ -91,8 +91,11 @@ static void v4l2_chardev_release(struct kobject *kobj) struct video_device *vfd = container_of(kobj, struct video_device, cdev.kobj); mutex_lock(&videodev_lock); - if (video_device[vfd->minor] != vfd) - panic("videodev: bad release"); + if (video_device[vfd->minor] != vfd) { + mutex_unlock(&videodev_lock); + BUG(); + return; + } /* Free up this device for reuse */ video_device[vfd->minor] = NULL; -- cgit v0.10.2 From bccd7003aef20e040cef95d1216dac26199d7071 Mon Sep 17 00:00:00 2001 From: Patrick Boettcher Date: Sat, 30 Aug 2008 12:15:54 -0300 Subject: V4L/DVB (8866): Add dummy FE to the Kconfig-file and fix it Reactivated dummy frontend driver which is extremely useful for debugging. Signed-off-by: Patrick Boettcher Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/dvb/frontends/Kconfig b/drivers/media/dvb/frontends/Kconfig index 774f5c2..e2444f2 100644 --- a/drivers/media/dvb/frontends/Kconfig +++ b/drivers/media/dvb/frontends/Kconfig @@ -392,4 +392,10 @@ config DVB_LGS8GL5 help A DMB-TH tuner module. Say Y when you want to support this frontend. +comment "Tools to develop new frontends" + +config DVB_DUMMY_FE + tristate "Dummy frontend driver" + default n + endmenu diff --git a/drivers/media/dvb/frontends/Makefile b/drivers/media/dvb/frontends/Makefile index 262eaa4..ca24618 100644 --- a/drivers/media/dvb/frontends/Makefile +++ b/drivers/media/dvb/frontends/Makefile @@ -49,3 +49,4 @@ obj-$(CONFIG_DVB_AU8522) += au8522.o obj-$(CONFIG_DVB_TDA10048) += tda10048.o obj-$(CONFIG_DVB_S5H1411) += s5h1411.o obj-$(CONFIG_DVB_LGS8GL5) += lgs8gl5.o +obj-$(CONFIG_DVB_DUMMY_FE) += dvb_dummy_fe.o diff --git a/drivers/media/dvb/frontends/dvb_dummy_fe.c b/drivers/media/dvb/frontends/dvb_dummy_fe.c index fed09df..cb4d8a3 100644 --- a/drivers/media/dvb/frontends/dvb_dummy_fe.c +++ b/drivers/media/dvb/frontends/dvb_dummy_fe.c @@ -75,9 +75,10 @@ static int dvb_dummy_fe_get_frontend(struct dvb_frontend* fe, struct dvb_fronten static int dvb_dummy_fe_set_frontend(struct dvb_frontend* fe, struct dvb_frontend_parameters *p) { - if (fe->ops->tuner_ops->set_params) { - fe->ops->tuner_ops->set_params(fe, p); - if (fe->ops->i2c_gate_ctrl) fe->ops->i2c_gate_ctrl(fe, 0); + if (fe->ops.tuner_ops.set_params) { + fe->ops.tuner_ops.set_params(fe, p); + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 0); } return 0; -- cgit v0.10.2 From eb1b27bd86db6f9f73d6db973b18f31790a3d410 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Sat, 30 Aug 2008 10:18:21 -0300 Subject: V4L/DVB (8879): bttv: Don't unmask VPRES interrupt When the input is set to tuner and no antenna is connected, the BT848 can flood VPRES interrupts. So we don't want to enable this type of interrupts when the input it set to tuner. As we don't do anything when receiving such an interrupt anyway, the easiest fix is to simply not unmask this specific interrupt. Signed-off-by: Jean Delvare Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/bt8xx/bttv-driver.c b/drivers/media/video/bt8xx/bttv-driver.c index 035a58d..ef205cd2 100644 --- a/drivers/media/video/bt8xx/bttv-driver.c +++ b/drivers/media/video/bt8xx/bttv-driver.c @@ -1367,7 +1367,7 @@ static void init_irqreg(struct bttv *btv) (btv->gpioirq ? BT848_INT_GPINT : 0) | BT848_INT_SCERR | (fdsr ? BT848_INT_FDSR : 0) | - BT848_INT_RISCI|BT848_INT_OCERR|BT848_INT_VPRES| + BT848_INT_RISCI | BT848_INT_OCERR | BT848_INT_FMTCHG|BT848_INT_HLOCK| BT848_INT_I2CDONE, BT848_INT_MASK); -- cgit v0.10.2 From 26d2e854bc242f0134a4be7f1eed98129d96d943 Mon Sep 17 00:00:00 2001 From: Alexander Beregalov Date: Mon, 21 Jul 2008 16:20:32 -0300 Subject: V4L/DVB (8559): replace __FUNCTION__ with __func__ v4l: replace __FUNCTION__ with __func__ Signed-off-by: Alexander Beregalov Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/cx23885/cx23885-core.c b/drivers/media/video/cx23885/cx23885-core.c index 25fb099..beb3e61 100644 --- a/drivers/media/video/cx23885/cx23885-core.c +++ b/drivers/media/video/cx23885/cx23885-core.c @@ -1442,7 +1442,7 @@ void cx23885_cancel_buffers(struct cx23885_tsport *port) struct cx23885_dev *dev = port->dev; struct cx23885_dmaqueue *q = &port->mpegq; - dprintk(1, "%s()\n", __FUNCTION__); + dprintk(1, "%s()\n", __func__); del_timer_sync(&q->timeout); cx23885_stop_dma(port); do_cancel_buffers(port, "cancel", 0); diff --git a/include/media/saa7146.h b/include/media/saa7146.h index 2f68f4c..64a2ec7 100644 --- a/include/media/saa7146.h +++ b/include/media/saa7146.h @@ -30,7 +30,7 @@ extern unsigned int saa7146_debug; #define DEBUG_VARIABLE saa7146_debug #endif -#define DEBUG_PROLOG printk("%s: %s(): ",KBUILD_MODNAME,__FUNCTION__) +#define DEBUG_PROLOG printk("%s: %s(): ",KBUILD_MODNAME, __func__) #define INFO(x) { printk("%s: ",KBUILD_MODNAME); printk x; } #define ERR(x) { DEBUG_PROLOG; printk x; } -- cgit v0.10.2 From 81ae953b687e7cdfa094b07a6544523f3bb81aa3 Mon Sep 17 00:00:00 2001 From: Oliver Endriss Date: Wed, 3 Sep 2008 18:16:09 -0300 Subject: V4L/DVB (8888): budget: Support Activy DVB-T with TDHD1 tuner Support Fujitsu-Siemens Activy DVB-T card rev AL (ALPS TDHD1-204A tuner). Signed-off-by: Oliver Endriss Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/dvb/frontends/tdhd1.h b/drivers/media/dvb/frontends/tdhd1.h new file mode 100644 index 0000000..de8aac7 --- /dev/null +++ b/drivers/media/dvb/frontends/tdhd1.h @@ -0,0 +1,70 @@ +/* + * tdhd1.h - ALPS TDHD1-204A tuner support + * + * Copyright (C) 2008 Oliver Endriss + * + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * Or, point your browser to http://www.gnu.org/copyleft/gpl.html + * + * + * The project's page is at http://www.linuxtv.org + */ + +#ifndef TDHD1_H +#define TDHD1_H + +#include "tda1004x.h" + +static struct tda1004x_config alps_tdhd1_204a_config = { + .demod_address = 0x8, + .invert = 1, + .invert_oclk = 0, + .xtal_freq = TDA10046_XTAL_4M, + .agc_config = TDA10046_AGC_DEFAULT, + .if_freq = TDA10046_FREQ_3617, +}; + +static int alps_tdhd1_204a_tuner_set_params(struct dvb_frontend *fe, struct dvb_frontend_parameters *params) +{ + struct i2c_adapter *i2c = fe->tuner_priv; + u8 data[4]; + struct i2c_msg msg = { .addr = 0x61, .flags = 0, .buf = data, .len = sizeof(data) }; + u32 div; + + div = (params->frequency + 36166666) / 166666; + + data[0] = (div >> 8) & 0x7f; + data[1] = div & 0xff; + data[2] = 0x85; + + if (params->frequency >= 174000000 && params->frequency <= 230000000) + data[3] = 0x02; + else if (params->frequency >= 470000000 && params->frequency <= 823000000) + data[3] = 0x0C; + else if (params->frequency > 823000000 && params->frequency <= 862000000) + data[3] = 0x8C; + else + return -EINVAL; + + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 1); + if (i2c_transfer(i2c, &msg, 1) != 1) + return -EIO; + + return 0; +} + +#endif /* TDHD1_H */ diff --git a/drivers/media/dvb/ttpci/Kconfig b/drivers/media/dvb/ttpci/Kconfig index 41b5a98..867027c 100644 --- a/drivers/media/dvb/ttpci/Kconfig +++ b/drivers/media/dvb/ttpci/Kconfig @@ -86,6 +86,7 @@ config DVB_BUDGET select DVB_TDA10086 if !DVB_FE_CUSTOMISE select DVB_TDA826X if !DVB_FE_CUSTOMISE select DVB_LNBP21 if !DVB_FE_CUSTOMISE + select DVB_TDA1004X if !DVB_FE_CUSTOMISE help Support for simple SAA7146 based DVB cards (so called Budget- or Nova-PCI cards) without onboard MPEG2 decoder, and without diff --git a/drivers/media/dvb/ttpci/budget.c b/drivers/media/dvb/ttpci/budget.c index 851e523..a4664ba 100644 --- a/drivers/media/dvb/ttpci/budget.c +++ b/drivers/media/dvb/ttpci/budget.c @@ -46,6 +46,7 @@ #include "lnbp21.h" #include "bsru6.h" #include "bsbe1.h" +#include "tdhd1.h" static int diseqc_method; module_param(diseqc_method, int, 0444); @@ -511,6 +512,14 @@ static void frontend_init(struct budget *budget) } break; + case 0x5f60: /* Fujitsu Siemens Activy Budget-T PCI rev AL (tda10046/ALPS TDHD1-204A) */ + budget->dvb_frontend = dvb_attach(tda10046_attach, &alps_tdhd1_204a_config, &budget->i2c_adap); + if (budget->dvb_frontend) { + budget->dvb_frontend->ops.tuner_ops.set_params = alps_tdhd1_204a_tuner_set_params; + budget->dvb_frontend->tuner_priv = &budget->i2c_adap; + } + break; + case 0x5f61: /* Fujitsu Siemens Activy Budget-T PCI rev GR (L64781/Grundig 29504-401(tsa5060)) */ budget->dvb_frontend = dvb_attach(l64781_attach, &grundig_29504_401_config_activy, &budget->i2c_adap); if (budget->dvb_frontend) { @@ -624,6 +633,7 @@ MAKE_BUDGET_INFO(ttbs1401, "TT-Budget-S-1401 PCI", BUDGET_TT); MAKE_BUDGET_INFO(fsacs0, "Fujitsu Siemens Activy Budget-S PCI (rev GR/grundig frontend)", BUDGET_FS_ACTIVY); MAKE_BUDGET_INFO(fsacs1, "Fujitsu Siemens Activy Budget-S PCI (rev AL/alps frontend)", BUDGET_FS_ACTIVY); MAKE_BUDGET_INFO(fsact, "Fujitsu Siemens Activy Budget-T PCI (rev GR/Grundig frontend)", BUDGET_FS_ACTIVY); +MAKE_BUDGET_INFO(fsact1, "Fujitsu Siemens Activy Budget-T PCI (rev AL/ALPS TDHD1-204A)", BUDGET_FS_ACTIVY); static struct pci_device_id pci_tbl[] = { MAKE_EXTENSION_PCI(ttbs, 0x13c2, 0x1003), @@ -634,6 +644,7 @@ static struct pci_device_id pci_tbl[] = { MAKE_EXTENSION_PCI(ttbs1401, 0x13c2, 0x1018), MAKE_EXTENSION_PCI(fsacs1,0x1131, 0x4f60), MAKE_EXTENSION_PCI(fsacs0,0x1131, 0x4f61), + MAKE_EXTENSION_PCI(fsact1, 0x1131, 0x5f60), MAKE_EXTENSION_PCI(fsact, 0x1131, 0x5f61), { .vendor = 0, -- cgit v0.10.2 From 9e615eac827094147401c44c9ff955b468d4fa79 Mon Sep 17 00:00:00 2001 From: Oliver Endriss Date: Wed, 3 Sep 2008 19:15:27 -0300 Subject: V4L/DVB (8889): dvb-ttpci: Support full-ts hardware modification Add support for the 'full-ts' hardware modification. On full-featured cards the data throughput is limited by the hardware design. The full-ts mod removes this bottleneck, i.e. the card is able to deliver the complete transport stream of a transponder. For details see http://www.escape-edv.de/endriss/dvb-full-ts-mod Signed-off-by: Oliver Endriss Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/dvb/ttpci/av7110.c b/drivers/media/dvb/ttpci/av7110.c index 3b64180..404108f 100644 --- a/drivers/media/dvb/ttpci/av7110.c +++ b/drivers/media/dvb/ttpci/av7110.c @@ -88,6 +88,7 @@ static int budgetpatch; static int wss_cfg_4_3 = 0x4008; static int wss_cfg_16_9 = 0x0007; static int tv_standard; +static int full_ts; module_param_named(debug, av7110_debug, int, 0644); MODULE_PARM_DESC(debug, "debug level (bitmask, default 0)"); @@ -106,6 +107,8 @@ module_param(volume, int, 0444); MODULE_PARM_DESC(volume, "initial volume: default 255 (range 0-255)"); module_param(budgetpatch, int, 0444); MODULE_PARM_DESC(budgetpatch, "use budget-patch hardware modification: default 0 (0 no, 1 autodetect, 2 always)"); +module_param(full_ts, int, 0444); +MODULE_PARM_DESC(full_ts, "enable code for full-ts hardware modification: 0 disable (default), 1 enable"); module_param(wss_cfg_4_3, int, 0444); MODULE_PARM_DESC(wss_cfg_4_3, "WSS 4:3 - default 0x4008 - bit 15: disable, 14: burst mode, 13..0: wss data"); module_param(wss_cfg_16_9, int, 0444); @@ -116,6 +119,8 @@ MODULE_PARM_DESC(tv_standard, "TV standard: 0 PAL (default), 1 NTSC"); DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); static void restart_feeds(struct av7110 *av7110); +static int budget_start_feed(struct dvb_demux_feed *feed); +static int budget_stop_feed(struct dvb_demux_feed *feed); static int av7110_num; @@ -806,6 +811,9 @@ static int StartHWFilter(struct dvb_demux_filter *dvbdmxfilter) dprintk(4, "%p\n", av7110); + if (av7110->full_ts) + return 0; + if (dvbdmxfilter->type == DMX_TYPE_SEC) { if (hw_sections) { buf[4] = (dvbdmxfilter->filter.filter_value[0] << 8) | @@ -854,6 +862,9 @@ static int StopHWFilter(struct dvb_demux_filter *dvbdmxfilter) dprintk(4, "%p\n", av7110); + if (av7110->full_ts) + return 0; + handle = dvbdmxfilter->hw_handle; if (handle >= 32) { printk("%s tried to stop invalid filter %04x, filter type = %x\n", @@ -913,7 +924,7 @@ static int dvb_feed_start_pid(struct dvb_demux_feed *dvbdmxfeed) return ret; } - if ((dvbdmxfeed->ts_type & TS_PACKET)) { + if ((dvbdmxfeed->ts_type & TS_PACKET) && !av7110->full_ts) { if (dvbdmxfeed->pes_type == 0 && !(dvbdmx->pids[0] & 0x8000)) ret = av7110_av_start_record(av7110, RP_AUDIO, dvbdmxfeed); if (dvbdmxfeed->pes_type == 1 && !(dvbdmx->pids[1] & 0x8000)) @@ -974,7 +985,7 @@ static int av7110_start_feed(struct dvb_demux_feed *feed) if (!demux->dmx.frontend) return -EINVAL; - if (feed->pid > 0x1fff) + if (!av7110->full_ts && feed->pid > 0x1fff) return -EINVAL; if (feed->type == DMX_TYPE_TS) { @@ -1003,7 +1014,12 @@ static int av7110_start_feed(struct dvb_demux_feed *feed) } } - else if (feed->type == DMX_TYPE_SEC) { + if (av7110->full_ts) { + budget_start_feed(feed); + return ret; + } + + if (feed->type == DMX_TYPE_SEC) { int i; for (i = 0; i < demux->filternum; i++) { @@ -1050,7 +1066,12 @@ static int av7110_stop_feed(struct dvb_demux_feed *feed) ret = StopHWFilter(feed->filter); } - if (!ret && feed->type == DMX_TYPE_SEC) { + if (av7110->full_ts) { + budget_stop_feed(feed); + return ret; + } + + if (feed->type == DMX_TYPE_SEC) { for (i = 0; ifilternum; i++) { if (demux->filter[i].state == DMX_STATE_GO && demux->filter[i].filter.parent == &feed->feed.sec) { @@ -1074,6 +1095,7 @@ static void restart_feeds(struct av7110 *av7110) struct dvb_demux *dvbdmx = &av7110->demux; struct dvb_demux_feed *feed; int mode; + int feeding; int i, j; dprintk(4, "%p\n", av7110); @@ -1082,6 +1104,8 @@ static void restart_feeds(struct av7110 *av7110) av7110->playing = 0; av7110->rec_mode = 0; + feeding = av7110->feeding1; /* full_ts mod */ + for (i = 0; i < dvbdmx->feednum; i++) { feed = &dvbdmx->feed[i]; if (feed->state == DMX_STATE_GO) { @@ -1099,6 +1123,8 @@ static void restart_feeds(struct av7110 *av7110) } } + av7110->feeding1 = feeding; /* full_ts mod */ + if (mode) av7110_av_start_play(av7110, mode); } @@ -1197,8 +1223,9 @@ static int start_ts_capture(struct av7110 *budget) if (budget->feeding1) return ++budget->feeding1; - memset(budget->grabbing, 0x00, TS_HEIGHT * TS_WIDTH); + memset(budget->grabbing, 0x00, TS_BUFLEN); budget->ttbp = 0; + SAA7146_ISR_CLEAR(budget->dev, MASK_10); /* VPE */ SAA7146_IER_ENABLE(budget->dev, MASK_10); /* VPE */ saa7146_write(budget->dev, MC1, (MASK_04 | MASK_20)); /* DMA3 on */ return ++budget->feeding1; @@ -1239,12 +1266,8 @@ static void vpeirq(unsigned long data) u8 *mem = (u8 *) (budget->grabbing); u32 olddma = budget->ttbp; u32 newdma = saa7146_read(budget->dev, PCI_VDP3); + struct dvb_demux *demux = budget->full_ts ? &budget->demux : &budget->demux1; - if (!budgetpatch) { - printk("av7110.c: vpeirq() called while budgetpatch disabled!" - " check saa7146 IER register\n"); - BUG(); - } /* nearest lower position divisible by 188 */ newdma -= newdma % 188; @@ -1268,11 +1291,11 @@ static void vpeirq(unsigned long data) if (newdma > olddma) /* no wraparound, dump olddma..newdma */ - dvb_dmx_swfilter_packets(&budget->demux1, mem + olddma, (newdma - olddma) / 188); + dvb_dmx_swfilter_packets(demux, mem + olddma, (newdma - olddma) / 188); else { /* wraparound, dump olddma..buflen and 0..newdma */ - dvb_dmx_swfilter_packets(&budget->demux1, mem + olddma, (TS_BUFLEN - olddma) / 188); - dvb_dmx_swfilter_packets(&budget->demux1, mem, newdma / 188); + dvb_dmx_swfilter_packets(demux, mem + olddma, (TS_BUFLEN - olddma) / 188); + dvb_dmx_swfilter_packets(demux, mem, newdma / 188); } } @@ -1294,8 +1317,8 @@ static int av7110_register(struct av7110 *av7110) for (i = 0; i < 32; i++) av7110->handle2filter[i] = NULL; - dvbdemux->filternum = 32; - dvbdemux->feednum = 32; + dvbdemux->filternum = (av7110->full_ts) ? 256 : 32; + dvbdemux->feednum = (av7110->full_ts) ? 256 : 32; dvbdemux->start_feed = av7110_start_feed; dvbdemux->stop_feed = av7110_stop_feed; dvbdemux->write_to_decoder = av7110_write_to_decoder; @@ -1305,7 +1328,7 @@ static int av7110_register(struct av7110 *av7110) dvb_dmx_init(&av7110->demux); av7110->demux.dmx.get_stc = dvb_get_stc; - av7110->dmxdev.filternum = 32; + av7110->dmxdev.filternum = (av7110->full_ts) ? 256 : 32; av7110->dmxdev.demux = &dvbdemux->dmx; av7110->dmxdev.capabilities = 0; @@ -1422,7 +1445,6 @@ int i2c_writereg(struct av7110 *av7110, u8 id, u8 reg, u8 val) return i2c_transfer(&av7110->i2c_adap, &msgs, 1); } -#if 0 u8 i2c_readreg(struct av7110 *av7110, u8 id, u8 reg) { u8 mm1[] = {0x00}; @@ -1439,7 +1461,6 @@ u8 i2c_readreg(struct av7110 *av7110, u8 id, u8 reg) return mm2[0]; } -#endif /**************************************************************************** * INITIALIZATION @@ -2484,7 +2505,47 @@ static int __devinit av7110_attach(struct saa7146_dev* dev, av7110->dvb_adapter.proposed_mac); ret = -ENOMEM; - if (budgetpatch) { + /* full-ts mod? */ + if (full_ts) + av7110->full_ts = true; + + /* check for full-ts flag in eeprom */ + if (i2c_readreg(av7110, 0xaa, 0) == 0x4f && i2c_readreg(av7110, 0xaa, 1) == 0x45) { + u8 flags = i2c_readreg(av7110, 0xaa, 2); + if (flags != 0xff && (flags & 0x01)) + av7110->full_ts = true; + } + + if (av7110->full_ts) { + printk(KERN_INFO "dvb-ttpci: full-ts mode enabled for saa7146 port B\n"); + spin_lock_init(&av7110->feedlock1); + av7110->grabbing = saa7146_vmalloc_build_pgtable(pdev, length, + &av7110->pt); + if (!av7110->grabbing) + goto err_i2c_del_3; + + saa7146_write(dev, DD1_STREAM_B, 0x00000000); + saa7146_write(dev, MC2, (MASK_10 | MASK_26)); + + saa7146_write(dev, DD1_INIT, 0x00000600); + saa7146_write(dev, MC2, (MASK_09 | MASK_25 | MASK_10 | MASK_26)); + + saa7146_write(dev, BRS_CTRL, 0x60000000); + saa7146_write(dev, MC2, MASK_08 | MASK_24); + + /* dma3 */ + saa7146_write(dev, PCI_BT_V1, 0x001c0000 | (saa7146_read(dev, PCI_BT_V1) & ~0x001f0000)); + saa7146_write(dev, BASE_ODD3, 0); + saa7146_write(dev, BASE_EVEN3, 0); + saa7146_write(dev, PROT_ADDR3, TS_WIDTH * TS_HEIGHT); + saa7146_write(dev, PITCH3, TS_WIDTH); + saa7146_write(dev, BASE_PAGE3, av7110->pt.dma | ME1 | 0x90); + saa7146_write(dev, NUM_LINE_BYTE3, (TS_HEIGHT << 16) | TS_WIDTH); + saa7146_write(dev, MC2, MASK_04 | MASK_20); + + tasklet_init(&av7110->vpe_tasklet, vpeirq, (unsigned long) av7110); + + } else if (budgetpatch) { spin_lock_init(&av7110->feedlock1); av7110->grabbing = saa7146_vmalloc_build_pgtable(pdev, length, &av7110->pt); @@ -2710,11 +2771,13 @@ static int __devexit av7110_detach(struct saa7146_dev* saa) #if defined(CONFIG_INPUT_EVDEV) || defined(CONFIG_INPUT_EVDEV_MODULE) av7110_ir_exit(av7110); #endif - if (budgetpatch) { - /* Disable RPS1 */ - saa7146_write(saa, MC1, MASK_29); - /* VSYNC LOW (inactive) */ - saa7146_setgpio(saa, 3, SAA7146_GPIO_OUTLO); + if (budgetpatch || av7110->full_ts) { + if (budgetpatch) { + /* Disable RPS1 */ + saa7146_write(saa, MC1, MASK_29); + /* VSYNC LOW (inactive) */ + saa7146_setgpio(saa, 3, SAA7146_GPIO_OUTLO); + } saa7146_write(saa, MC1, MASK_20); /* DMA3 off */ SAA7146_IER_DISABLE(saa, MASK_10); SAA7146_ISR_CLEAR(saa, MASK_10); @@ -2794,7 +2857,7 @@ static void av7110_irq(struct saa7146_dev* dev, u32 *isr) tasklet_schedule(&av7110->gpio_tasklet); } - if ((*isr & MASK_10) && budgetpatch) + if (*isr & MASK_10) tasklet_schedule(&av7110->vpe_tasklet); } diff --git a/drivers/media/dvb/ttpci/av7110.h b/drivers/media/dvb/ttpci/av7110.h index 55f23dd..d85b851 100644 --- a/drivers/media/dvb/ttpci/av7110.h +++ b/drivers/media/dvb/ttpci/av7110.h @@ -192,6 +192,7 @@ struct av7110 { unsigned char *grabbing; struct saa7146_pgtable pt; struct tasklet_struct vpe_tasklet; + bool full_ts; int fe_synced; struct mutex pid_mutex; diff --git a/drivers/media/dvb/ttpci/av7110_av.c b/drivers/media/dvb/ttpci/av7110_av.c index 184647ad..bdc62ac 100644 --- a/drivers/media/dvb/ttpci/av7110_av.c +++ b/drivers/media/dvb/ttpci/av7110_av.c @@ -788,6 +788,9 @@ int av7110_write_to_decoder(struct dvb_demux_feed *feed, const u8 *buf, size_t l dprintk(2, "av7110:%p, \n", av7110); + if (av7110->full_ts && demux->dmx.frontend->source != DMX_MEMORY_FE) + return 0; + switch (feed->pes_type) { case 0: if (av7110->audiostate.stream_source == AUDIO_SOURCE_MEMORY) -- cgit v0.10.2 From 83512e207479d0bdb83ee1e000a306af9e6e870e Mon Sep 17 00:00:00 2001 From: Oliver Endriss Date: Thu, 4 Sep 2008 20:35:19 -0300 Subject: V4L/DVB (8890): budget: Add callback to load firmware for the TDHD1 tuner Supply callback to load firmware for the TDHD1 tuner (using request_firmware). Signed-off-by: Oliver Endriss Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/dvb/frontends/tdhd1.h b/drivers/media/dvb/frontends/tdhd1.h index de8aac7..51f1706 100644 --- a/drivers/media/dvb/frontends/tdhd1.h +++ b/drivers/media/dvb/frontends/tdhd1.h @@ -28,6 +28,8 @@ #include "tda1004x.h" +static int alps_tdhd1_204_request_firmware(struct dvb_frontend *fe, const struct firmware **fw, char *name); + static struct tda1004x_config alps_tdhd1_204a_config = { .demod_address = 0x8, .invert = 1, @@ -35,6 +37,7 @@ static struct tda1004x_config alps_tdhd1_204a_config = { .xtal_freq = TDA10046_XTAL_4M, .agc_config = TDA10046_AGC_DEFAULT, .if_freq = TDA10046_FREQ_3617, + .request_firmware = alps_tdhd1_204_request_firmware }; static int alps_tdhd1_204a_tuner_set_params(struct dvb_frontend *fe, struct dvb_frontend_parameters *params) diff --git a/drivers/media/dvb/ttpci/budget.c b/drivers/media/dvb/ttpci/budget.c index a4664ba..d95203d 100644 --- a/drivers/media/dvb/ttpci/budget.c +++ b/drivers/media/dvb/ttpci/budget.c @@ -391,6 +391,13 @@ static struct stv0299_config alps_bsbe1_config_activy = { .set_symbol_rate = alps_bsbe1_set_symbol_rate, }; +static int alps_tdhd1_204_request_firmware(struct dvb_frontend *fe, const struct firmware **fw, char *name) +{ + struct budget *budget = (struct budget *)fe->dvb->priv; + + return request_firmware(fw, name, &budget->dev->pci->dev); +} + static int i2c_readreg(struct i2c_adapter *i2c, u8 adr, u8 reg) { -- cgit v0.10.2 From 5f33df1443cd53283279d017b45ed1b1bc66f622 Mon Sep 17 00:00:00 2001 From: Mike Isely Date: Sat, 30 Aug 2008 15:09:31 -0300 Subject: V4L/DVB (8893): pvrusb2: Add comment elaborating on direct use of swab32() Signed-off-by: Mike Isely Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/pvrusb2/pvrusb2-hdw.c b/drivers/media/video/pvrusb2/pvrusb2-hdw.c index 7fa903a..c8dedba 100644 --- a/drivers/media/video/pvrusb2/pvrusb2-hdw.c +++ b/drivers/media/video/pvrusb2/pvrusb2-hdw.c @@ -1313,6 +1313,17 @@ int pvr2_upload_firmware2(struct pvr2_hdw *hdw) if (bcnt > FIRMWARE_CHUNK_SIZE) bcnt = FIRMWARE_CHUNK_SIZE; memcpy(fw_ptr, fw_entry->data + fw_done, bcnt); /* Usbsnoop log shows that we must swap bytes... */ + /* Some background info: The data being swapped here is a + firmware image destined for the mpeg encoder chip that + lives at the other end of a USB endpoint. The encoder + chip always talks in 32 bit chunks and its storage is + organized into 32 bit words. However from the file + system to the encoder chip everything is purely a byte + stream. The firmware file's contents are always 32 bit + swapped from what the encoder expects. Thus the need + always exists to swap the bytes regardless of the endian + type of the host processor and therefore swab32() makes + the most sense. */ for (icnt = 0; icnt < bcnt/4 ; icnt++) ((u32 *)fw_ptr)[icnt] = swab32(((u32 *)fw_ptr)[icnt]); -- cgit v0.10.2 From 157afbc0de7d99cde39a5525b4c43acd4e02ef82 Mon Sep 17 00:00:00 2001 From: Mike Isely Date: Sat, 30 Aug 2008 15:11:16 -0300 Subject: V4L/DVB (8894): pvrusb2: Remove BKL The earlier change from Hans Verkuil that pushed the BKL from video_open() down into the drivers should be unneeded for the pvrusb2 driver. This driver's implementation for open already protects its internal structures through other means, thus the BKL is not required. This change reverses Hans' previous change, for the pvrusb2 driver. It probably would have been a good idea for Hans to previously have asked for my ack before committing his change. Signed-off-by: Mike Isely Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/pvrusb2/pvrusb2-v4l2.c b/drivers/media/video/pvrusb2/pvrusb2-v4l2.c index 26ffaa2..00306fa 100644 --- a/drivers/media/video/pvrusb2/pvrusb2-v4l2.c +++ b/drivers/media/video/pvrusb2/pvrusb2-v4l2.c @@ -932,7 +932,6 @@ static int pvr2_v4l2_open(struct inode *inode, struct file *file) unsigned int input_cnt,idx; int ret = 0; - lock_kernel(); dip = container_of(video_devdata(file),struct pvr2_v4l2_dev,devbase); vp = dip->v4lp; @@ -943,13 +942,11 @@ static int pvr2_v4l2_open(struct inode *inode, struct file *file) if (!pvr2_hdw_dev_ok(hdw)) { pvr2_trace(PVR2_TRACE_OPEN_CLOSE, "pvr2_v4l2_open: hardware not ready"); - unlock_kernel(); return -EIO; } fhp = kzalloc(sizeof(*fhp),GFP_KERNEL); if (!fhp) { - unlock_kernel(); return -ENOMEM; } @@ -979,7 +976,6 @@ static int pvr2_v4l2_open(struct inode *inode, struct file *file) fhp); kfree(fhp); - unlock_kernel(); return ret; } @@ -996,7 +992,6 @@ static int pvr2_v4l2_open(struct inode *inode, struct file *file) "Destroying pvr_v4l2_fh id=%p (input map failure)", fhp); kfree(fhp); - unlock_kernel(); return -ENOMEM; } input_cnt = 0; @@ -1020,7 +1015,6 @@ static int pvr2_v4l2_open(struct inode *inode, struct file *file) v4l2_prio_open(&vp->prio,&fhp->prio); fhp->fw_mode_flag = pvr2_hdw_cpufw_get_enabled(hdw); - unlock_kernel(); return 0; } -- cgit v0.10.2 From fe15f13679bf52bb5c8acb8b4847e6d73ba62c17 Mon Sep 17 00:00:00 2001 From: Mike Isely Date: Sat, 30 Aug 2008 18:11:40 -0300 Subject: V4L/DVB (8895): pvrusb2: Fail gracefully if an alien USB ID is used The driver includes an internal table specifying additional information on a per device-type basis. This works great until somebody tries to run-time associate another USB ID with the driver. This change should hopefully allow the driver to fail gracefully under such a circumstance. Signed-off-by: Mike Isely Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/pvrusb2/pvrusb2-hdw.c b/drivers/media/video/pvrusb2/pvrusb2-hdw.c index c8dedba..a7d636f 100644 --- a/drivers/media/video/pvrusb2/pvrusb2-hdw.c +++ b/drivers/media/video/pvrusb2/pvrusb2-hdw.c @@ -1915,7 +1915,7 @@ struct pvr2_hdw *pvr2_hdw_create(struct usb_interface *intf, const struct usb_device_id *devid) { unsigned int idx,cnt1,cnt2,m; - struct pvr2_hdw *hdw; + struct pvr2_hdw *hdw = NULL; int valid_std_mask; struct pvr2_ctrl *cptr; const struct pvr2_device_desc *hdw_desc; @@ -1925,6 +1925,16 @@ struct pvr2_hdw *pvr2_hdw_create(struct usb_interface *intf, hdw_desc = (const struct pvr2_device_desc *)(devid->driver_info); + if (hdw_desc == NULL) { + pvr2_trace(PVR2_TRACE_INIT, "pvr2_hdw_create:" + " No device description pointer," + " unable to continue."); + pvr2_trace(PVR2_TRACE_INIT, "If you have a new device type," + " please contact Mike Isely " + " to get it included in the driver\n"); + goto fail; + } + hdw = kzalloc(sizeof(*hdw),GFP_KERNEL); pvr2_trace(PVR2_TRACE_INIT,"pvr2_hdw_create: hdw=%p, type \"%s\"", hdw,hdw_desc->description); -- cgit v0.10.2 From e784bfb93c155ba4b354452c69ac02a29d336d97 Mon Sep 17 00:00:00 2001 From: "vdb128@picaros.org" Date: Sat, 30 Aug 2008 18:26:39 -0300 Subject: V4L/DVB (8896): pvrusb2: Implement crop support Implement pvrusb2 driver plumbing to support cropping. Submitted by a pvrusb2 user. Signed-off-by: Mike Isely Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/pvrusb2/pvrusb2-hdw-internal.h b/drivers/media/video/pvrusb2/pvrusb2-hdw-internal.h index 657f861..0453244 100644 --- a/drivers/media/video/pvrusb2/pvrusb2-hdw-internal.h +++ b/drivers/media/video/pvrusb2/pvrusb2-hdw-internal.h @@ -319,6 +319,7 @@ struct pvr2_hdw { struct pvr2_ctl_info std_info_cur; struct v4l2_standard *std_defs; const char **std_enum_names; + struct v4l2_cropcap cropcap; // Generated string names, one per actual V4L2 standard const char *std_mask_ptrs[32]; @@ -367,6 +368,10 @@ struct pvr2_hdw { VCREATE_DATA(bass); VCREATE_DATA(treble); VCREATE_DATA(mute); + VCREATE_DATA(cropl); + VCREATE_DATA(cropt); + VCREATE_DATA(cropw); + VCREATE_DATA(croph); VCREATE_DATA(input); VCREATE_DATA(audiomode); VCREATE_DATA(res_hor); diff --git a/drivers/media/video/pvrusb2/pvrusb2-hdw.c b/drivers/media/video/pvrusb2/pvrusb2-hdw.c index a7d636f..68f4315 100644 --- a/drivers/media/video/pvrusb2/pvrusb2-hdw.c +++ b/drivers/media/video/pvrusb2/pvrusb2-hdw.c @@ -402,6 +402,52 @@ static int ctrl_freq_set(struct pvr2_ctrl *cptr,int m,int v) return 0; } +static int ctrl_cropl_min_get(struct pvr2_ctrl *cptr, int *left) +{ + struct v4l2_cropcap *cap = &cptr->hdw->cropcap; + if (cap->bounds.width > 0) { + /* This statement is present purely to shut up + checkpatch.pl */ + *left = cap->bounds.left - cap->defrect.left; + } else { + /* This statement is present purely to shut up + checkpatch.pl */ + *left = -119; + } + return 0; +} + +static int ctrl_cropl_max_get(struct pvr2_ctrl *cptr, int *left) +{ + struct v4l2_cropcap *cap = &cptr->hdw->cropcap; + if (cap->bounds.width > 0) { + *left = cap->bounds.left + cap->bounds.width + - cap->defrect.left; + *left += 3; + *left -= cptr->hdw->cropw_val; + } else { + /* This statement is present purely to shut up + checkpatch.pl */ + *left = 340; + } + return 0; +} + +static int ctrl_cropt_min_get(struct pvr2_ctrl *cptr, int *top) +{ + struct v4l2_cropcap *cap = &cptr->hdw->cropcap; + if (cap->bounds.height > 0) { + /* This statement is present purely to shut up + checkpatch.pl */ + *top = cap->bounds.top - cap->defrect.top; + } else { + /* This statement is present purely to shut up + checkpatch.pl */ + *top = -19; + } + return 0; +} + static int ctrl_vres_max_get(struct pvr2_ctrl *cptr,int *vp) { /* Actual maximum depends on the video standard in effect. */ @@ -413,6 +459,19 @@ static int ctrl_vres_max_get(struct pvr2_ctrl *cptr,int *vp) return 0; } +static int ctrl_cropt_max_get(struct pvr2_ctrl *cptr, int *top) +{ + struct v4l2_cropcap *cap = &cptr->hdw->cropcap; + if (cap->bounds.height > 0) { + *top = cap->bounds.top + cap->bounds.height - cap->defrect.top; + *top -= cptr->hdw->croph_val; + } else { + ctrl_vres_max_get(cptr, top); + *top -= 32; + } + return 0; +} + static int ctrl_vres_min_get(struct pvr2_ctrl *cptr,int *vp) { /* Actual minimum depends on device digitizer type. */ @@ -779,6 +838,10 @@ VCREATE_FUNCS(balance) VCREATE_FUNCS(bass) VCREATE_FUNCS(treble) VCREATE_FUNCS(mute) +VCREATE_FUNCS(cropl) +VCREATE_FUNCS(cropt) +VCREATE_FUNCS(cropw) +VCREATE_FUNCS(croph) VCREATE_FUNCS(audiomode) VCREATE_FUNCS(res_hor) VCREATE_FUNCS(res_ver) @@ -849,6 +912,39 @@ static const struct pvr2_ctl_info control_defs[] = { .default_value = 0, DEFREF(mute), DEFBOOL, + }, { + .desc = "Capture left margin", + .name = "crop_left", + .internal_id = PVR2_CID_CROPL, + .default_value = 0, + DEFREF(cropl), + DEFINT(-129, 340), + .get_min_value = ctrl_cropl_min_get, + .get_max_value = ctrl_cropl_max_get, + }, { + .desc = "Capture top margin", + .name = "crop_top", + .internal_id = PVR2_CID_CROPT, + .default_value = 0, + DEFREF(cropt), + DEFINT(-35, 544), + .get_min_value = ctrl_cropt_min_get, + .get_max_value = ctrl_cropt_max_get, + }, { + .desc = "Capture width", + .name = "crop_width", + .internal_id = PVR2_CID_CROPW, + .default_value = 720, + DEFREF(cropw), + DEFINT(388, 849), /* determined empirically, any res_hor>=64 */ + }, { + .desc = "Capture height", + .name = "crop_height", + .internal_id = PVR2_CID_CROPH, + .default_value = 480, + DEFREF(croph), + DEFINT(32, 576), + .get_max_value = ctrl_vres_max_get, },{ .desc = "Video Source", .name = "input", @@ -2092,6 +2188,7 @@ struct pvr2_hdw *pvr2_hdw_create(struct usb_interface *intf, valid_std_mask; } + memset(&hdw->cropcap, 0, sizeof hdw->cropcap); hdw->eeprom_addr = -1; hdw->unit_number = -1; hdw->v4l_minor_number_video = -1; @@ -2528,6 +2625,28 @@ static int pvr2_hdw_commit_execute(struct pvr2_hdw *hdw) /* Can't commit anything until pathway is ok. */ return 0; } + /* The broadcast decoder can only scale down, so if + * res_*_dirty && crop window < output format ==> enlarge crop. + * + * The mpeg encoder receives fields of res_hor_val dots and + * res_ver_val halflines. Limits: hor<=720, ver<=576. + */ + if (hdw->res_hor_dirty && hdw->cropw_val < hdw->res_hor_val) { + hdw->cropw_val = hdw->res_hor_val; + hdw->cropw_dirty = !0; + } else if (hdw->cropw_dirty) { + hdw->res_hor_dirty = !0; /* must rescale */ + hdw->res_hor_val = min(720, hdw->cropw_val); + } + if (hdw->res_ver_dirty && hdw->croph_val < hdw->res_ver_val) { + hdw->croph_val = hdw->res_ver_val; + hdw->croph_dirty = !0; + } else if (hdw->croph_dirty) { + int nvres = hdw->std_mask_cur & V4L2_STD_525_60 ? 480 : 576; + hdw->res_ver_dirty = !0; + hdw->res_ver_val = min(nvres, hdw->croph_val); + } + /* If any of the below has changed, then we can't do the update while the pipeline is running. Pipeline must be paused first and decoder -> encoder connection be made quiescent before we diff --git a/drivers/media/video/pvrusb2/pvrusb2-hdw.h b/drivers/media/video/pvrusb2/pvrusb2-hdw.h index c04956d..b4dcda8 100644 --- a/drivers/media/video/pvrusb2/pvrusb2-hdw.h +++ b/drivers/media/video/pvrusb2/pvrusb2-hdw.h @@ -36,6 +36,10 @@ #define PVR2_CID_FREQUENCY 6 #define PVR2_CID_HRES 7 #define PVR2_CID_VRES 8 +#define PVR2_CID_CROPL 9 +#define PVR2_CID_CROPT 10 +#define PVR2_CID_CROPW 11 +#define PVR2_CID_CROPH 12 /* Legal values for the INPUT state variable */ #define PVR2_CVAL_INPUT_TV 0 diff --git a/drivers/media/video/pvrusb2/pvrusb2-i2c-chips-v4l2.c b/drivers/media/video/pvrusb2/pvrusb2-i2c-chips-v4l2.c index ccdb429..94a4771 100644 --- a/drivers/media/video/pvrusb2/pvrusb2-i2c-chips-v4l2.c +++ b/drivers/media/video/pvrusb2/pvrusb2-i2c-chips-v4l2.c @@ -37,8 +37,9 @@ #define OP_VOLUME 3 #define OP_FREQ 4 #define OP_AUDIORATE 5 -#define OP_SIZE 6 -#define OP_LOG 7 +#define OP_CROP 6 +#define OP_SIZE 7 +#define OP_LOG 8 static const struct pvr2_i2c_op * const ops[] = { [OP_STANDARD] = &pvr2_i2c_op_v4l2_standard, @@ -46,6 +47,7 @@ static const struct pvr2_i2c_op * const ops[] = { [OP_BCSH] = &pvr2_i2c_op_v4l2_bcsh, [OP_VOLUME] = &pvr2_i2c_op_v4l2_volume, [OP_FREQ] = &pvr2_i2c_op_v4l2_frequency, + [OP_CROP] = &pvr2_i2c_op_v4l2_crop, [OP_SIZE] = &pvr2_i2c_op_v4l2_size, [OP_LOG] = &pvr2_i2c_op_v4l2_log, }; @@ -59,6 +61,7 @@ void pvr2_i2c_probe(struct pvr2_hdw *hdw,struct pvr2_i2c_client *cp) (1 << OP_BCSH) | (1 << OP_VOLUME) | (1 << OP_FREQ) | + (1 << OP_CROP) | (1 << OP_SIZE) | (1 << OP_LOG)); cp->status_poll = pvr2_v4l2_cmd_status_poll; diff --git a/drivers/media/video/pvrusb2/pvrusb2-i2c-cmd-v4l2.c b/drivers/media/video/pvrusb2/pvrusb2-i2c-cmd-v4l2.c index 55f04a0..4408579 100644 --- a/drivers/media/video/pvrusb2/pvrusb2-i2c-cmd-v4l2.c +++ b/drivers/media/video/pvrusb2/pvrusb2-i2c-cmd-v4l2.c @@ -233,6 +233,55 @@ const struct pvr2_i2c_op pvr2_i2c_op_v4l2_size = { }; +static void set_crop(struct pvr2_hdw *hdw) +{ + struct v4l2_cropcap cap; + struct v4l2_crop crop; + int stat; + + memset(&cap, 0, sizeof cap); + cap.type = V4L2_BUF_TYPE_VIDEO_CAPTURE; + stat = pvr2_i2c_core_cmd(hdw, VIDIOC_CROPCAP, &cap); + hdw->cropcap = cap; + + memset(&crop, 0, sizeof crop); + crop.type = V4L2_BUF_TYPE_VIDEO_CAPTURE; + crop.c = cap.defrect; + crop.c.left += hdw->cropl_val; + crop.c.top += hdw->cropt_val; + crop.c.height = hdw->croph_val; + crop.c.width = hdw->cropw_val; + + pvr2_trace(PVR2_TRACE_CHIPS, + "i2c v4l2 set_crop stat=%d cap=%d:%d:%d:%d" + " crop=%d:%d:%d:%d", stat, cap.bounds.width, + cap.bounds.height, cap.bounds.left, cap.bounds.top, + crop.c.width, crop.c.height, crop.c.left, crop.c.top); + + if (stat >= 0) { + /* This comment is present purely to keep + checkpatch.pl quiet */ + pvr2_i2c_core_cmd(hdw, VIDIOC_S_CROP, &crop); + } +} + +static int check_crop(struct pvr2_hdw *hdw) +{ + /* The "0 +" stupidity is present only to get checkpatch.pl to + shut up. I _want_ those parantheses present so that the + two lines automatically line up in my editor. I despise + checkpatch.pl. */ + return 0 + (hdw->cropl_dirty || hdw->cropt_dirty || + hdw->cropw_dirty || hdw->croph_dirty); +} + +const struct pvr2_i2c_op pvr2_i2c_op_v4l2_crop = { + .check = check_crop, + .update = set_crop, + .name = "v4l2_crop", +}; + + static void do_log(struct pvr2_hdw *hdw) { pvr2_trace(PVR2_TRACE_CHIPS,"i2c v4l2 do_log()"); diff --git a/drivers/media/video/pvrusb2/pvrusb2-i2c-cmd-v4l2.h b/drivers/media/video/pvrusb2/pvrusb2-i2c-cmd-v4l2.h index 7fa3868..eb744a2 100644 --- a/drivers/media/video/pvrusb2/pvrusb2-i2c-cmd-v4l2.h +++ b/drivers/media/video/pvrusb2/pvrusb2-i2c-cmd-v4l2.h @@ -29,6 +29,7 @@ extern const struct pvr2_i2c_op pvr2_i2c_op_v4l2_radio; extern const struct pvr2_i2c_op pvr2_i2c_op_v4l2_bcsh; extern const struct pvr2_i2c_op pvr2_i2c_op_v4l2_volume; extern const struct pvr2_i2c_op pvr2_i2c_op_v4l2_frequency; +extern const struct pvr2_i2c_op pvr2_i2c_op_v4l2_crop; extern const struct pvr2_i2c_op pvr2_i2c_op_v4l2_size; extern const struct pvr2_i2c_op pvr2_i2c_op_v4l2_audiomode; extern const struct pvr2_i2c_op pvr2_i2c_op_v4l2_log; -- cgit v0.10.2 From 755879c66bb820ec27e2e02b22b13d3896583efe Mon Sep 17 00:00:00 2001 From: Mike Isely Date: Sun, 31 Aug 2008 20:50:59 -0300 Subject: V4L/DVB (8897): pvrusb2: Mark crop window size change as being disruptive to the encoder Signed-off-by: Mike Isely Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/pvrusb2/pvrusb2-hdw.c b/drivers/media/video/pvrusb2/pvrusb2-hdw.c index 68f4315..e29a39f 100644 --- a/drivers/media/video/pvrusb2/pvrusb2-hdw.c +++ b/drivers/media/video/pvrusb2/pvrusb2-hdw.c @@ -2657,6 +2657,8 @@ static int pvr2_hdw_commit_execute(struct pvr2_hdw *hdw) hdw->srate_dirty || hdw->res_ver_dirty || hdw->res_hor_dirty || + hdw->cropw_dirty || + hdw->croph_dirty || hdw->input_dirty || (hdw->active_stream_type != hdw->desired_stream_type)); if (disruptive_change && !hdw->state_pipeline_idle) { -- cgit v0.10.2 From 26dd1c57a05f5c6d339d55d5317d47576fd2fbc5 Mon Sep 17 00:00:00 2001 From: Mike Isely Date: Sun, 31 Aug 2008 20:55:03 -0300 Subject: V4L/DVB (8898): pvrusb2: Be able to programmatically retrieve a control's default value The pvrusb2 control mechanism up until now has used a constant int to hold a control's default value. This change makes it possible to retrieve the control's default through some other means, e.g. as a result of a query from lower level software. Signed-off-by: Mike Isely Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/pvrusb2/pvrusb2-ctrl.c b/drivers/media/video/pvrusb2/pvrusb2-ctrl.c index 0764fbf..2741c7b 100644 --- a/drivers/media/video/pvrusb2/pvrusb2-ctrl.c +++ b/drivers/media/video/pvrusb2/pvrusb2-ctrl.c @@ -134,13 +134,19 @@ int pvr2_ctrl_get_min(struct pvr2_ctrl *cptr) /* Retrieve control's default value (any type) */ -int pvr2_ctrl_get_def(struct pvr2_ctrl *cptr) +int pvr2_ctrl_get_def(struct pvr2_ctrl *cptr, int *valptr) { int ret = 0; if (!cptr) return 0; LOCK_TAKE(cptr->hdw->big_lock); do { if (cptr->info->type == pvr2_ctl_int) { - ret = cptr->info->default_value; + if (cptr->info->get_def_value) { + /* Comment to keep checkpatch.pl quiet */ + ret = cptr->info->get_def_value(cptr, valptr); + } else { + /* Comment to keep checkpatch.pl quiet */ + *valptr = cptr->info->default_value; + } } } while(0); LOCK_GIVE(cptr->hdw->big_lock); return ret; diff --git a/drivers/media/video/pvrusb2/pvrusb2-ctrl.h b/drivers/media/video/pvrusb2/pvrusb2-ctrl.h index 0371ae6..794ff90 100644 --- a/drivers/media/video/pvrusb2/pvrusb2-ctrl.h +++ b/drivers/media/video/pvrusb2/pvrusb2-ctrl.h @@ -49,7 +49,7 @@ int pvr2_ctrl_get_max(struct pvr2_ctrl *); int pvr2_ctrl_get_min(struct pvr2_ctrl *); /* Retrieve control's default value (any type) */ -int pvr2_ctrl_get_def(struct pvr2_ctrl *); +int pvr2_ctrl_get_def(struct pvr2_ctrl *, int *valptr); /* Retrieve control's enumeration count (enum only) */ int pvr2_ctrl_get_cnt(struct pvr2_ctrl *); diff --git a/drivers/media/video/pvrusb2/pvrusb2-hdw-internal.h b/drivers/media/video/pvrusb2/pvrusb2-hdw-internal.h index 0453244..8bc9669 100644 --- a/drivers/media/video/pvrusb2/pvrusb2-hdw-internal.h +++ b/drivers/media/video/pvrusb2/pvrusb2-hdw-internal.h @@ -82,6 +82,7 @@ struct pvr2_ctl_info { /* Control's implementation */ pvr2_ctlf_get_value get_value; /* Get its value */ + pvr2_ctlf_get_value get_def_value; /* Get its default value */ pvr2_ctlf_get_value get_min_value; /* Get minimum allowed value */ pvr2_ctlf_get_value get_max_value; /* Get maximum allowed value */ pvr2_ctlf_set_value set_value; /* Set its value */ diff --git a/drivers/media/video/pvrusb2/pvrusb2-v4l2.c b/drivers/media/video/pvrusb2/pvrusb2-v4l2.c index 00306fa..c53037a 100644 --- a/drivers/media/video/pvrusb2/pvrusb2-v4l2.c +++ b/drivers/media/video/pvrusb2/pvrusb2-v4l2.c @@ -533,7 +533,7 @@ static int pvr2_v4l2_do_ioctl(struct inode *inode, struct file *file, lmin = pvr2_ctrl_get_min(hcp); lmax = pvr2_ctrl_get_max(hcp); - ldef = pvr2_ctrl_get_def(hcp); + pvr2_ctrl_get_def(hcp, &ldef); if (w == -1) { w = ldef; } else if (w < lmin) { @@ -543,7 +543,7 @@ static int pvr2_v4l2_do_ioctl(struct inode *inode, struct file *file, } lmin = pvr2_ctrl_get_min(vcp); lmax = pvr2_ctrl_get_max(vcp); - ldef = pvr2_ctrl_get_def(vcp); + pvr2_ctrl_get_def(vcp, &ldef); if (h == -1) { h = ldef; } else if (h < lmin) { @@ -604,6 +604,7 @@ static int pvr2_v4l2_do_ioctl(struct inode *inode, struct file *file, case VIDIOC_QUERYCTRL: { struct pvr2_ctrl *cptr; + int val; struct v4l2_queryctrl *vc = (struct v4l2_queryctrl *)arg; ret = 0; if (vc->id & V4L2_CTRL_FLAG_NEXT_CTRL) { @@ -627,7 +628,8 @@ static int pvr2_v4l2_do_ioctl(struct inode *inode, struct file *file, pvr2_ctrl_get_desc(cptr)); strlcpy(vc->name,pvr2_ctrl_get_desc(cptr),sizeof(vc->name)); vc->flags = pvr2_ctrl_get_v4lflags(cptr); - vc->default_value = pvr2_ctrl_get_def(cptr); + pvr2_ctrl_get_def(cptr, &val); + vc->default_value = val; switch (pvr2_ctrl_get_type(cptr)) { case pvr2_ctl_enum: vc->type = V4L2_CTRL_TYPE_MENU; -- cgit v0.10.2 From 0b7c2c9598e7447ad6a9d157491e6c5459ae56de Mon Sep 17 00:00:00 2001 From: Mike Isely Date: Sun, 31 Aug 2008 20:57:54 -0300 Subject: V4L/DVB (8899): pvrusb2: Implement default value retrieval in sysfs interface Signed-off-by: Mike Isely Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/pvrusb2/pvrusb2-sysfs.c b/drivers/media/video/pvrusb2/pvrusb2-sysfs.c index 46a8c39b..ac01b11 100644 --- a/drivers/media/video/pvrusb2/pvrusb2-sysfs.c +++ b/drivers/media/video/pvrusb2/pvrusb2-sysfs.c @@ -65,6 +65,7 @@ struct pvr2_sysfs_ctl_item { struct device_attribute attr_type; struct device_attribute attr_min; struct device_attribute attr_max; + struct device_attribute attr_def; struct device_attribute attr_enum; struct device_attribute attr_bits; struct device_attribute attr_val; @@ -145,6 +146,24 @@ static ssize_t show_max(struct device *class_dev, return scnprintf(buf, PAGE_SIZE, "%ld\n", val); } +static ssize_t show_def(struct device *class_dev, + struct device_attribute *attr, + char *buf) +{ + struct pvr2_sysfs_ctl_item *cip; + int val; + int ret; + cip = container_of(attr, struct pvr2_sysfs_ctl_item, attr_def); + ret = pvr2_ctrl_get_def(cip->cptr, &val); + pvr2_sysfs_trace("pvr2_sysfs(%p) show_def(cid=%d) is %d, stat=%d", + cip->chptr, cip->ctl_id, val, ret); + if (ret < 0) { + /* Keep checkpatch.pl quiet */ + return ret; + } + return scnprintf(buf, PAGE_SIZE, "%d\n", val); +} + static ssize_t show_val_norm(struct device *class_dev, struct device_attribute *attr, char *buf) @@ -320,6 +339,10 @@ static void pvr2_sysfs_add_control(struct pvr2_sysfs *sfp,int ctl_id) cip->attr_max.attr.mode = S_IRUGO; cip->attr_max.show = show_max; + cip->attr_def.attr.name = "def_val"; + cip->attr_def.attr.mode = S_IRUGO; + cip->attr_def.show = show_def; + cip->attr_val.attr.name = "cur_val"; cip->attr_val.attr.mode = S_IRUGO; @@ -343,6 +366,7 @@ static void pvr2_sysfs_add_control(struct pvr2_sysfs *sfp,int ctl_id) cip->attr_gen[acnt++] = &cip->attr_name.attr; cip->attr_gen[acnt++] = &cip->attr_type.attr; cip->attr_gen[acnt++] = &cip->attr_val.attr; + cip->attr_gen[acnt++] = &cip->attr_def.attr; cip->attr_val.show = show_val_norm; cip->attr_val.store = store_val_norm; if (pvr2_ctrl_has_custom_symbols(cptr)) { -- cgit v0.10.2 From 432907f750b27aa2b41e1bf398e6eb711ead448f Mon Sep 17 00:00:00 2001 From: Mike Isely Date: Sun, 31 Aug 2008 21:02:20 -0300 Subject: V4L/DVB (8900): pvrusb2: Implement cropping pass through This builds upon the previous pvrusb2 change to more formally implement full cropping support. This enables access from the driver's V4L interface, and enables access to full capabilities from sysfs as well. Note that this is only effective when in analog mode. It also will only work when the underlying digitizer's driver (saa7115 or cx25840 depending on the hardware) also implements the appropriate functions. Signed-off-by: Mike Isely Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/pvrusb2/pvrusb2-hdw-internal.h b/drivers/media/video/pvrusb2/pvrusb2-hdw-internal.h index 8bc9669..de7ee72 100644 --- a/drivers/media/video/pvrusb2/pvrusb2-hdw-internal.h +++ b/drivers/media/video/pvrusb2/pvrusb2-hdw-internal.h @@ -308,6 +308,10 @@ struct pvr2_hdw { struct v4l2_tuner tuner_signal_info; int tuner_signal_stale; + /* Cropping capability info */ + struct v4l2_cropcap cropcap_info; + int cropcap_stale; + /* Video standard handling */ v4l2_std_id std_mask_eeprom; // Hardware supported selections v4l2_std_id std_mask_avail; // Which standards we may select from @@ -320,7 +324,6 @@ struct pvr2_hdw { struct pvr2_ctl_info std_info_cur; struct v4l2_standard *std_defs; const char **std_enum_names; - struct v4l2_cropcap cropcap; // Generated string names, one per actual V4L2 standard const char *std_mask_ptrs[32]; diff --git a/drivers/media/video/pvrusb2/pvrusb2-hdw.c b/drivers/media/video/pvrusb2/pvrusb2-hdw.c index e29a39f..9bb59b2 100644 --- a/drivers/media/video/pvrusb2/pvrusb2-hdw.c +++ b/drivers/media/video/pvrusb2/pvrusb2-hdw.c @@ -298,6 +298,7 @@ static int pvr2_send_request_ex(struct pvr2_hdw *hdw, unsigned int timeout,int probe_fl, void *write_data,unsigned int write_len, void *read_data,unsigned int read_len); +static int pvr2_hdw_check_cropcap(struct pvr2_hdw *hdw); static void trace_stbit(const char *name,int val) @@ -404,70 +405,220 @@ static int ctrl_freq_set(struct pvr2_ctrl *cptr,int m,int v) static int ctrl_cropl_min_get(struct pvr2_ctrl *cptr, int *left) { - struct v4l2_cropcap *cap = &cptr->hdw->cropcap; - if (cap->bounds.width > 0) { - /* This statement is present purely to shut up - checkpatch.pl */ - *left = cap->bounds.left - cap->defrect.left; - } else { - /* This statement is present purely to shut up - checkpatch.pl */ - *left = -119; + struct v4l2_cropcap *cap = &cptr->hdw->cropcap_info; + int stat = pvr2_hdw_check_cropcap(cptr->hdw); + if (stat != 0) { + /* Keep checkpatch.pl quiet */ + return stat; } + *left = cap->bounds.left; return 0; } static int ctrl_cropl_max_get(struct pvr2_ctrl *cptr, int *left) { - struct v4l2_cropcap *cap = &cptr->hdw->cropcap; - if (cap->bounds.width > 0) { - *left = cap->bounds.left + cap->bounds.width - - cap->defrect.left; - *left += 3; - *left -= cptr->hdw->cropw_val; - } else { + struct v4l2_cropcap *cap = &cptr->hdw->cropcap_info; + int stat = pvr2_hdw_check_cropcap(cptr->hdw); + if (stat != 0) { + /* Keep checkpatch.pl quiet */ + return stat; + } + *left = cap->bounds.left; + if (cap->bounds.width > cptr->hdw->cropw_val) { /* This statement is present purely to shut up checkpatch.pl */ - *left = 340; + *left += cap->bounds.width - cptr->hdw->cropw_val; } return 0; } static int ctrl_cropt_min_get(struct pvr2_ctrl *cptr, int *top) { - struct v4l2_cropcap *cap = &cptr->hdw->cropcap; - if (cap->bounds.height > 0) { - /* This statement is present purely to shut up - checkpatch.pl */ - *top = cap->bounds.top - cap->defrect.top; - } else { - /* This statement is present purely to shut up - checkpatch.pl */ - *top = -19; + struct v4l2_cropcap *cap = &cptr->hdw->cropcap_info; + int stat = pvr2_hdw_check_cropcap(cptr->hdw); + if (stat != 0) { + /* Keep checkpatch.pl quiet */ + return stat; } + *top = cap->bounds.top; return 0; } -static int ctrl_vres_max_get(struct pvr2_ctrl *cptr,int *vp) +static int ctrl_cropt_max_get(struct pvr2_ctrl *cptr, int *top) { - /* Actual maximum depends on the video standard in effect. */ - if (cptr->hdw->std_mask_cur & V4L2_STD_525_60) { - *vp = 480; - } else { - *vp = 576; + struct v4l2_cropcap *cap = &cptr->hdw->cropcap_info; + int stat = pvr2_hdw_check_cropcap(cptr->hdw); + if (stat != 0) { + /* Keep checkpatch.pl quiet */ + return stat; + } + *top = cap->bounds.top; + if (cap->bounds.height > cptr->hdw->croph_val) { + /* Keep checkpatch.pl quiet */ + *top += cap->bounds.height - cptr->hdw->croph_val; } return 0; } -static int ctrl_cropt_max_get(struct pvr2_ctrl *cptr, int *top) +static int ctrl_cropw_max_get(struct pvr2_ctrl *cptr, int *val) { - struct v4l2_cropcap *cap = &cptr->hdw->cropcap; - if (cap->bounds.height > 0) { - *top = cap->bounds.top + cap->bounds.height - cap->defrect.top; - *top -= cptr->hdw->croph_val; + struct v4l2_cropcap *cap = &cptr->hdw->cropcap_info; + int stat = pvr2_hdw_check_cropcap(cptr->hdw); + if (stat != 0) { + /* Keep checkpatch.pl quiet */ + return stat; + } + *val = 0; + if (cap->bounds.width > cptr->hdw->cropl_val) { + /* Keep checkpatch.pl quiet */ + *val = cap->bounds.width - cptr->hdw->cropl_val; + } + return 0; +} + +static int ctrl_croph_max_get(struct pvr2_ctrl *cptr, int *val) +{ + struct v4l2_cropcap *cap = &cptr->hdw->cropcap_info; + int stat = pvr2_hdw_check_cropcap(cptr->hdw); + if (stat != 0) { + /* Keep checkpatch.pl quiet */ + return stat; + } + *val = 0; + if (cap->bounds.height > cptr->hdw->cropt_val) { + /* Keep checkpatch.pl quiet */ + *val = cap->bounds.height - cptr->hdw->cropt_val; + } + return 0; +} + +static int ctrl_get_cropcapbl(struct pvr2_ctrl *cptr, int *val) +{ + struct v4l2_cropcap *cap = &cptr->hdw->cropcap_info; + int stat = pvr2_hdw_check_cropcap(cptr->hdw); + if (stat != 0) { + /* Keep checkpatch.pl quiet */ + return stat; + } + *val = cap->bounds.left; + return 0; +} + +static int ctrl_get_cropcapbt(struct pvr2_ctrl *cptr, int *val) +{ + struct v4l2_cropcap *cap = &cptr->hdw->cropcap_info; + int stat = pvr2_hdw_check_cropcap(cptr->hdw); + if (stat != 0) { + /* Keep checkpatch.pl quiet */ + return stat; + } + *val = cap->bounds.top; + return 0; +} + +static int ctrl_get_cropcapbw(struct pvr2_ctrl *cptr, int *val) +{ + struct v4l2_cropcap *cap = &cptr->hdw->cropcap_info; + int stat = pvr2_hdw_check_cropcap(cptr->hdw); + if (stat != 0) { + /* Keep checkpatch.pl quiet */ + return stat; + } + *val = cap->bounds.width; + return 0; +} + +static int ctrl_get_cropcapbh(struct pvr2_ctrl *cptr, int *val) +{ + struct v4l2_cropcap *cap = &cptr->hdw->cropcap_info; + int stat = pvr2_hdw_check_cropcap(cptr->hdw); + if (stat != 0) { + /* Keep checkpatch.pl quiet */ + return stat; + } + *val = cap->bounds.height; + return 0; +} + +static int ctrl_get_cropcapdl(struct pvr2_ctrl *cptr, int *val) +{ + struct v4l2_cropcap *cap = &cptr->hdw->cropcap_info; + int stat = pvr2_hdw_check_cropcap(cptr->hdw); + if (stat != 0) { + /* Keep checkpatch.pl quiet */ + return stat; + } + *val = cap->defrect.left; + return 0; +} + +static int ctrl_get_cropcapdt(struct pvr2_ctrl *cptr, int *val) +{ + struct v4l2_cropcap *cap = &cptr->hdw->cropcap_info; + int stat = pvr2_hdw_check_cropcap(cptr->hdw); + if (stat != 0) { + /* Keep checkpatch.pl quiet */ + return stat; + } + *val = cap->defrect.top; + return 0; +} + +static int ctrl_get_cropcapdw(struct pvr2_ctrl *cptr, int *val) +{ + struct v4l2_cropcap *cap = &cptr->hdw->cropcap_info; + int stat = pvr2_hdw_check_cropcap(cptr->hdw); + if (stat != 0) { + /* Keep checkpatch.pl quiet */ + return stat; + } + *val = cap->defrect.width; + return 0; +} + +static int ctrl_get_cropcapdh(struct pvr2_ctrl *cptr, int *val) +{ + struct v4l2_cropcap *cap = &cptr->hdw->cropcap_info; + int stat = pvr2_hdw_check_cropcap(cptr->hdw); + if (stat != 0) { + /* Keep checkpatch.pl quiet */ + return stat; + } + *val = cap->defrect.height; + return 0; +} + +static int ctrl_get_cropcappan(struct pvr2_ctrl *cptr, int *val) +{ + struct v4l2_cropcap *cap = &cptr->hdw->cropcap_info; + int stat = pvr2_hdw_check_cropcap(cptr->hdw); + if (stat != 0) { + /* Keep checkpatch.pl quiet */ + return stat; + } + *val = cap->pixelaspect.numerator; + return 0; +} + +static int ctrl_get_cropcappad(struct pvr2_ctrl *cptr, int *val) +{ + struct v4l2_cropcap *cap = &cptr->hdw->cropcap_info; + int stat = pvr2_hdw_check_cropcap(cptr->hdw); + if (stat != 0) { + /* Keep checkpatch.pl quiet */ + return stat; + } + *val = cap->pixelaspect.denominator; + return 0; +} + +static int ctrl_vres_max_get(struct pvr2_ctrl *cptr,int *vp) +{ + /* Actual maximum depends on the video standard in effect. */ + if (cptr->hdw->std_mask_cur & V4L2_STD_525_60) { + *vp = 480; } else { - ctrl_vres_max_get(cptr, top); - *top -= 32; + *vp = 576; } return 0; } @@ -913,7 +1064,7 @@ static const struct pvr2_ctl_info control_defs[] = { DEFREF(mute), DEFBOOL, }, { - .desc = "Capture left margin", + .desc = "Capture crop left margin", .name = "crop_left", .internal_id = PVR2_CID_CROPL, .default_value = 0, @@ -921,8 +1072,9 @@ static const struct pvr2_ctl_info control_defs[] = { DEFINT(-129, 340), .get_min_value = ctrl_cropl_min_get, .get_max_value = ctrl_cropl_max_get, + .get_def_value = ctrl_get_cropcapdl, }, { - .desc = "Capture top margin", + .desc = "Capture crop top margin", .name = "crop_top", .internal_id = PVR2_CID_CROPT, .default_value = 0, @@ -930,21 +1082,53 @@ static const struct pvr2_ctl_info control_defs[] = { DEFINT(-35, 544), .get_min_value = ctrl_cropt_min_get, .get_max_value = ctrl_cropt_max_get, + .get_def_value = ctrl_get_cropcapdt, }, { - .desc = "Capture width", + .desc = "Capture crop width", .name = "crop_width", .internal_id = PVR2_CID_CROPW, .default_value = 720, DEFREF(cropw), - DEFINT(388, 849), /* determined empirically, any res_hor>=64 */ + .get_max_value = ctrl_cropw_max_get, + .get_def_value = ctrl_get_cropcapdw, }, { - .desc = "Capture height", + .desc = "Capture crop height", .name = "crop_height", .internal_id = PVR2_CID_CROPH, .default_value = 480, DEFREF(croph), - DEFINT(32, 576), - .get_max_value = ctrl_vres_max_get, + .get_max_value = ctrl_croph_max_get, + .get_def_value = ctrl_get_cropcapdh, + }, { + .desc = "Capture capability pixel aspect numerator", + .name = "cropcap_pixel_numerator", + .internal_id = PVR2_CID_CROPCAPPAN, + .get_value = ctrl_get_cropcappan, + }, { + .desc = "Capture capability pixel aspect denominator", + .name = "cropcap_pixel_denominator", + .internal_id = PVR2_CID_CROPCAPPAD, + .get_value = ctrl_get_cropcappad, + }, { + .desc = "Capture capability bounds top", + .name = "cropcap_bounds_top", + .internal_id = PVR2_CID_CROPCAPBT, + .get_value = ctrl_get_cropcapbt, + }, { + .desc = "Capture capability bounds left", + .name = "cropcap_bounds_left", + .internal_id = PVR2_CID_CROPCAPBL, + .get_value = ctrl_get_cropcapbl, + }, { + .desc = "Capture capability bounds width", + .name = "cropcap_bounds_width", + .internal_id = PVR2_CID_CROPCAPBW, + .get_value = ctrl_get_cropcapbw, + }, { + .desc = "Capture capability bounds height", + .name = "cropcap_bounds_height", + .internal_id = PVR2_CID_CROPCAPBH, + .get_value = ctrl_get_cropcapbh, },{ .desc = "Video Source", .name = "input", @@ -2188,7 +2372,7 @@ struct pvr2_hdw *pvr2_hdw_create(struct usb_interface *intf, valid_std_mask; } - memset(&hdw->cropcap, 0, sizeof hdw->cropcap); + hdw->cropcap_stale = !0; hdw->eeprom_addr = -1; hdw->unit_number = -1; hdw->v4l_minor_number_video = -1; @@ -2728,6 +2912,9 @@ static int pvr2_hdw_commit_execute(struct pvr2_hdw *hdw) } hdw->state_pipeline_config = !0; + /* Hardware state may have changed in a way to cause the cropping + capabilities to have changed. So mark it stale, which will + cause a later re-fetch. */ trace_stbit("state_pipeline_config",hdw->state_pipeline_config); return !0; } @@ -2818,6 +3005,36 @@ void pvr2_hdw_execute_tuner_poll(struct pvr2_hdw *hdw) } +static int pvr2_hdw_check_cropcap(struct pvr2_hdw *hdw) +{ + if (!hdw->cropcap_stale) { + /* Keep checkpatch.pl quiet */ + return 0; + } + pvr2_i2c_core_status_poll(hdw); + if (hdw->cropcap_stale) { + /* Keep checkpatch.pl quiet */ + return -EIO; + } + return 0; +} + + +/* Return information about cropping capabilities */ +int pvr2_hdw_get_cropcap(struct pvr2_hdw *hdw, struct v4l2_cropcap *pp) +{ + int stat = 0; + LOCK_TAKE(hdw->big_lock); + stat = pvr2_hdw_check_cropcap(hdw); + if (!stat) { + /* Keep checkpatch.pl quiet */ + memcpy(pp, &hdw->cropcap_info, sizeof(hdw->cropcap_info)); + } + LOCK_GIVE(hdw->big_lock); + return stat; +} + + /* Return information about the tuner */ int pvr2_hdw_get_tuner_status(struct pvr2_hdw *hdw,struct v4l2_tuner *vtp) { diff --git a/drivers/media/video/pvrusb2/pvrusb2-hdw.h b/drivers/media/video/pvrusb2/pvrusb2-hdw.h index b4dcda8..49482d1 100644 --- a/drivers/media/video/pvrusb2/pvrusb2-hdw.h +++ b/drivers/media/video/pvrusb2/pvrusb2-hdw.h @@ -40,6 +40,12 @@ #define PVR2_CID_CROPT 10 #define PVR2_CID_CROPW 11 #define PVR2_CID_CROPH 12 +#define PVR2_CID_CROPCAPPAN 13 +#define PVR2_CID_CROPCAPPAD 14 +#define PVR2_CID_CROPCAPBL 15 +#define PVR2_CID_CROPCAPBT 16 +#define PVR2_CID_CROPCAPBW 17 +#define PVR2_CID_CROPCAPBH 18 /* Legal values for the INPUT state variable */ #define PVR2_CVAL_INPUT_TV 0 @@ -174,6 +180,9 @@ void pvr2_hdw_execute_tuner_poll(struct pvr2_hdw *); /* Return information about the tuner */ int pvr2_hdw_get_tuner_status(struct pvr2_hdw *,struct v4l2_tuner *); +/* Return information about cropping capabilities */ +int pvr2_hdw_get_cropcap(struct pvr2_hdw *, struct v4l2_cropcap *); + /* Query device and see if it thinks it is on a high-speed USB link */ int pvr2_hdw_is_hsm(struct pvr2_hdw *); diff --git a/drivers/media/video/pvrusb2/pvrusb2-i2c-cmd-v4l2.c b/drivers/media/video/pvrusb2/pvrusb2-i2c-cmd-v4l2.c index 4408579..543fa30 100644 --- a/drivers/media/video/pvrusb2/pvrusb2-i2c-cmd-v4l2.c +++ b/drivers/media/video/pvrusb2/pvrusb2-i2c-cmd-v4l2.c @@ -37,6 +37,7 @@ static void set_standard(struct pvr2_hdw *hdw) pvr2_i2c_core_cmd(hdw,VIDIOC_S_STD,&vs); } hdw->tuner_signal_stale = !0; + hdw->cropcap_stale = !0; } @@ -235,34 +236,20 @@ const struct pvr2_i2c_op pvr2_i2c_op_v4l2_size = { static void set_crop(struct pvr2_hdw *hdw) { - struct v4l2_cropcap cap; struct v4l2_crop crop; - int stat; - - memset(&cap, 0, sizeof cap); - cap.type = V4L2_BUF_TYPE_VIDEO_CAPTURE; - stat = pvr2_i2c_core_cmd(hdw, VIDIOC_CROPCAP, &cap); - hdw->cropcap = cap; memset(&crop, 0, sizeof crop); crop.type = V4L2_BUF_TYPE_VIDEO_CAPTURE; - crop.c = cap.defrect; - crop.c.left += hdw->cropl_val; - crop.c.top += hdw->cropt_val; + crop.c.left = hdw->cropl_val; + crop.c.top = hdw->cropt_val; crop.c.height = hdw->croph_val; crop.c.width = hdw->cropw_val; pvr2_trace(PVR2_TRACE_CHIPS, - "i2c v4l2 set_crop stat=%d cap=%d:%d:%d:%d" - " crop=%d:%d:%d:%d", stat, cap.bounds.width, - cap.bounds.height, cap.bounds.left, cap.bounds.top, + "i2c v4l2 set_crop crop=%d:%d:%d:%d", crop.c.width, crop.c.height, crop.c.left, crop.c.top); - if (stat >= 0) { - /* This comment is present purely to keep - checkpatch.pl quiet */ - pvr2_i2c_core_cmd(hdw, VIDIOC_S_CROP, &crop); - } + pvr2_i2c_core_cmd(hdw, VIDIOC_S_CROP, &crop); } static int check_crop(struct pvr2_hdw *hdw) @@ -312,7 +299,19 @@ void pvr2_v4l2_cmd_stream(struct pvr2_i2c_client *cp,int fl) void pvr2_v4l2_cmd_status_poll(struct pvr2_i2c_client *cp) { - pvr2_i2c_client_cmd(cp,VIDIOC_G_TUNER,&cp->hdw->tuner_signal_info); + int stat; + struct pvr2_hdw *hdw = cp->hdw; + if (hdw->cropcap_stale) { + hdw->cropcap_info.type = V4L2_BUF_TYPE_VIDEO_CAPTURE; + stat = pvr2_i2c_client_cmd(cp, VIDIOC_CROPCAP, + &hdw->cropcap_info); + if (stat == 0) { + /* Check was successful, so the data is no + longer considered stale. */ + hdw->cropcap_stale = 0; + } + } + pvr2_i2c_client_cmd(cp, VIDIOC_G_TUNER, &hdw->tuner_signal_info); } diff --git a/drivers/media/video/pvrusb2/pvrusb2-i2c-core.c b/drivers/media/video/pvrusb2/pvrusb2-i2c-core.c index e600576..afb53b4 100644 --- a/drivers/media/video/pvrusb2/pvrusb2-i2c-core.c +++ b/drivers/media/video/pvrusb2/pvrusb2-i2c-core.c @@ -891,6 +891,7 @@ static int pvr2_i2c_attach_inform(struct i2c_client *client) INIT_LIST_HEAD(&cp->list); cp->client = client; mutex_lock(&hdw->i2c_list_lock); do { + hdw->cropcap_stale = !0; list_add_tail(&cp->list,&hdw->i2c_clients); hdw->i2c_pend_types |= PVR2_I2C_PEND_DETECT; } while (0); mutex_unlock(&hdw->i2c_list_lock); @@ -905,6 +906,7 @@ static int pvr2_i2c_detach_inform(struct i2c_client *client) unsigned long amask = 0; int foundfl = 0; mutex_lock(&hdw->i2c_list_lock); do { + hdw->cropcap_stale = !0; list_for_each_entry_safe(cp, ncp, &hdw->i2c_clients, list) { if (cp->client == client) { trace_i2c("pvr2_i2c_detach" diff --git a/drivers/media/video/pvrusb2/pvrusb2-v4l2.c b/drivers/media/video/pvrusb2/pvrusb2-v4l2.c index c53037a..f048d80 100644 --- a/drivers/media/video/pvrusb2/pvrusb2-v4l2.c +++ b/drivers/media/video/pvrusb2/pvrusb2-v4l2.c @@ -755,6 +755,92 @@ static int pvr2_v4l2_do_ioctl(struct inode *inode, struct file *file, break; } + case VIDIOC_CROPCAP: + { + struct v4l2_cropcap *cap = (struct v4l2_cropcap *)arg; + if (cap->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) { + ret = -EINVAL; + break; + } + ret = pvr2_hdw_get_cropcap(hdw, cap); + cap->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; /* paranoia */ + break; + } + case VIDIOC_G_CROP: + { + struct v4l2_crop *crop = (struct v4l2_crop *)arg; + int val = 0; + if (crop->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) { + ret = -EINVAL; + break; + } + ret = pvr2_ctrl_get_value( + pvr2_hdw_get_ctrl_by_id(hdw, PVR2_CID_CROPL), &val); + if (ret != 0) { + ret = -EINVAL; + break; + } + crop->c.left = val; + ret = pvr2_ctrl_get_value( + pvr2_hdw_get_ctrl_by_id(hdw, PVR2_CID_CROPT), &val); + if (ret != 0) { + ret = -EINVAL; + break; + } + crop->c.top = val; + ret = pvr2_ctrl_get_value( + pvr2_hdw_get_ctrl_by_id(hdw, PVR2_CID_CROPW), &val); + if (ret != 0) { + ret = -EINVAL; + break; + } + crop->c.width = val; + ret = pvr2_ctrl_get_value( + pvr2_hdw_get_ctrl_by_id(hdw, PVR2_CID_CROPH), &val); + if (ret != 0) { + ret = -EINVAL; + break; + } + crop->c.height = val; + } + case VIDIOC_S_CROP: + { + struct v4l2_crop *crop = (struct v4l2_crop *)arg; + struct v4l2_cropcap cap; + if (crop->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) { + ret = -EINVAL; + break; + } + cap.type = V4L2_BUF_TYPE_VIDEO_CAPTURE; + ret = pvr2_ctrl_set_value( + pvr2_hdw_get_ctrl_by_id(hdw, PVR2_CID_CROPL), + crop->c.left); + if (ret != 0) { + ret = -EINVAL; + break; + } + ret = pvr2_ctrl_set_value( + pvr2_hdw_get_ctrl_by_id(hdw, PVR2_CID_CROPT), + crop->c.top); + if (ret != 0) { + ret = -EINVAL; + break; + } + ret = pvr2_ctrl_set_value( + pvr2_hdw_get_ctrl_by_id(hdw, PVR2_CID_CROPW), + crop->c.width); + if (ret != 0) { + ret = -EINVAL; + break; + } + ret = pvr2_ctrl_set_value( + pvr2_hdw_get_ctrl_by_id(hdw, PVR2_CID_CROPH), + crop->c.height); + if (ret != 0) { + ret = -EINVAL; + break; + } + } case VIDIOC_LOG_STATUS: { pvr2_hdw_trigger_module_log(hdw); -- cgit v0.10.2 From 0cc118671282044b2a87621e16d7722d5e60cd08 Mon Sep 17 00:00:00 2001 From: Mike Isely Date: Sun, 31 Aug 2008 21:06:11 -0300 Subject: V4L/DVB (8901): pvrusb2: Disable virtual IR device when not needed. Disable "virtual" IR receiver on for 24xxx devices that have an internal IR blaster. In that case there's another another IR receiver present and to leave the virtual receiver available just causes confusion. This means that 24xxx users will no longer see a phantom IR chip. Signed-off-by: Mike Isely Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/pvrusb2/pvrusb2-i2c-core.c b/drivers/media/video/pvrusb2/pvrusb2-i2c-core.c index afb53b4..72d615a 100644 --- a/drivers/media/video/pvrusb2/pvrusb2-i2c-core.c +++ b/drivers/media/video/pvrusb2/pvrusb2-i2c-core.c @@ -948,22 +948,32 @@ static struct i2c_adapter pvr2_i2c_adap_template = { .client_unregister = pvr2_i2c_detach_inform, }; -static void do_i2c_scan(struct pvr2_hdw *hdw) + +/* Return true if device exists at given address */ +static int do_i2c_probe(struct pvr2_hdw *hdw, int addr) { struct i2c_msg msg[1]; - int i,rc; + int rc; msg[0].addr = 0; msg[0].flags = I2C_M_RD; msg[0].len = 0; msg[0].buf = NULL; - printk("%s: i2c scan beginning\n",hdw->name); + msg[0].addr = addr; + rc = i2c_transfer(&hdw->i2c_adap, msg, ARRAY_SIZE(msg)); + return rc == 1; +} + +static void do_i2c_scan(struct pvr2_hdw *hdw) +{ + int i; + printk(KERN_INFO "%s: i2c scan beginning\n", hdw->name); for (i = 0; i < 128; i++) { - msg[0].addr = i; - rc = i2c_transfer(&hdw->i2c_adap,msg, ARRAY_SIZE(msg)); - if (rc != 1) continue; - printk("%s: i2c scan: found device @ 0x%x\n",hdw->name,i); + if (do_i2c_probe(hdw, i)) { + printk(KERN_INFO "%s: i2c scan: found device @ 0x%x\n", + hdw->name, i); + } } - printk("%s: i2c scan done.\n",hdw->name); + printk(KERN_INFO "%s: i2c scan done.\n", hdw->name); } void pvr2_i2c_core_init(struct pvr2_hdw *hdw) @@ -1008,6 +1018,16 @@ void pvr2_i2c_core_init(struct pvr2_hdw *hdw) mutex_init(&hdw->i2c_list_lock); hdw->i2c_linked = !0; i2c_add_adapter(&hdw->i2c_adap); + if (hdw->i2c_func[0x18] == i2c_24xxx_ir) { + /* Probe for a different type of IR receiver on this + device. If present, disable the emulated IR receiver. */ + if (do_i2c_probe(hdw, 0x71)) { + pvr2_trace(PVR2_TRACE_INFO, + "Device has newer IR hardware;" + " disabling unneeded virtual IR device"); + hdw->i2c_func[0x18] = NULL; + } + } if (i2c_scan) do_i2c_scan(hdw); } -- cgit v0.10.2 From 2bb87c24d7d5639bff65b41b1306542d6d2bf7d0 Mon Sep 17 00:00:00 2001 From: Mike Isely Date: Wed, 3 Sep 2008 21:51:59 -0300 Subject: V4L/DVB (8902): pvrusb2: Remove comment lines which refer to checkpatch's behavior Signed-off-by: Mike Isely Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/pvrusb2/pvrusb2-ctrl.c b/drivers/media/video/pvrusb2/pvrusb2-ctrl.c index 2741c7b..203f54c 100644 --- a/drivers/media/video/pvrusb2/pvrusb2-ctrl.c +++ b/drivers/media/video/pvrusb2/pvrusb2-ctrl.c @@ -141,10 +141,8 @@ int pvr2_ctrl_get_def(struct pvr2_ctrl *cptr, int *valptr) LOCK_TAKE(cptr->hdw->big_lock); do { if (cptr->info->type == pvr2_ctl_int) { if (cptr->info->get_def_value) { - /* Comment to keep checkpatch.pl quiet */ ret = cptr->info->get_def_value(cptr, valptr); } else { - /* Comment to keep checkpatch.pl quiet */ *valptr = cptr->info->default_value; } } diff --git a/drivers/media/video/pvrusb2/pvrusb2-hdw.c b/drivers/media/video/pvrusb2/pvrusb2-hdw.c index 9bb59b2..94265bd 100644 --- a/drivers/media/video/pvrusb2/pvrusb2-hdw.c +++ b/drivers/media/video/pvrusb2/pvrusb2-hdw.c @@ -408,7 +408,6 @@ static int ctrl_cropl_min_get(struct pvr2_ctrl *cptr, int *left) struct v4l2_cropcap *cap = &cptr->hdw->cropcap_info; int stat = pvr2_hdw_check_cropcap(cptr->hdw); if (stat != 0) { - /* Keep checkpatch.pl quiet */ return stat; } *left = cap->bounds.left; @@ -420,13 +419,10 @@ static int ctrl_cropl_max_get(struct pvr2_ctrl *cptr, int *left) struct v4l2_cropcap *cap = &cptr->hdw->cropcap_info; int stat = pvr2_hdw_check_cropcap(cptr->hdw); if (stat != 0) { - /* Keep checkpatch.pl quiet */ return stat; } *left = cap->bounds.left; if (cap->bounds.width > cptr->hdw->cropw_val) { - /* This statement is present purely to shut up - checkpatch.pl */ *left += cap->bounds.width - cptr->hdw->cropw_val; } return 0; @@ -437,7 +433,6 @@ static int ctrl_cropt_min_get(struct pvr2_ctrl *cptr, int *top) struct v4l2_cropcap *cap = &cptr->hdw->cropcap_info; int stat = pvr2_hdw_check_cropcap(cptr->hdw); if (stat != 0) { - /* Keep checkpatch.pl quiet */ return stat; } *top = cap->bounds.top; @@ -449,12 +444,10 @@ static int ctrl_cropt_max_get(struct pvr2_ctrl *cptr, int *top) struct v4l2_cropcap *cap = &cptr->hdw->cropcap_info; int stat = pvr2_hdw_check_cropcap(cptr->hdw); if (stat != 0) { - /* Keep checkpatch.pl quiet */ return stat; } *top = cap->bounds.top; if (cap->bounds.height > cptr->hdw->croph_val) { - /* Keep checkpatch.pl quiet */ *top += cap->bounds.height - cptr->hdw->croph_val; } return 0; @@ -465,12 +458,10 @@ static int ctrl_cropw_max_get(struct pvr2_ctrl *cptr, int *val) struct v4l2_cropcap *cap = &cptr->hdw->cropcap_info; int stat = pvr2_hdw_check_cropcap(cptr->hdw); if (stat != 0) { - /* Keep checkpatch.pl quiet */ return stat; } *val = 0; if (cap->bounds.width > cptr->hdw->cropl_val) { - /* Keep checkpatch.pl quiet */ *val = cap->bounds.width - cptr->hdw->cropl_val; } return 0; @@ -481,12 +472,10 @@ static int ctrl_croph_max_get(struct pvr2_ctrl *cptr, int *val) struct v4l2_cropcap *cap = &cptr->hdw->cropcap_info; int stat = pvr2_hdw_check_cropcap(cptr->hdw); if (stat != 0) { - /* Keep checkpatch.pl quiet */ return stat; } *val = 0; if (cap->bounds.height > cptr->hdw->cropt_val) { - /* Keep checkpatch.pl quiet */ *val = cap->bounds.height - cptr->hdw->cropt_val; } return 0; @@ -497,7 +486,6 @@ static int ctrl_get_cropcapbl(struct pvr2_ctrl *cptr, int *val) struct v4l2_cropcap *cap = &cptr->hdw->cropcap_info; int stat = pvr2_hdw_check_cropcap(cptr->hdw); if (stat != 0) { - /* Keep checkpatch.pl quiet */ return stat; } *val = cap->bounds.left; @@ -509,7 +497,6 @@ static int ctrl_get_cropcapbt(struct pvr2_ctrl *cptr, int *val) struct v4l2_cropcap *cap = &cptr->hdw->cropcap_info; int stat = pvr2_hdw_check_cropcap(cptr->hdw); if (stat != 0) { - /* Keep checkpatch.pl quiet */ return stat; } *val = cap->bounds.top; @@ -521,7 +508,6 @@ static int ctrl_get_cropcapbw(struct pvr2_ctrl *cptr, int *val) struct v4l2_cropcap *cap = &cptr->hdw->cropcap_info; int stat = pvr2_hdw_check_cropcap(cptr->hdw); if (stat != 0) { - /* Keep checkpatch.pl quiet */ return stat; } *val = cap->bounds.width; @@ -533,7 +519,6 @@ static int ctrl_get_cropcapbh(struct pvr2_ctrl *cptr, int *val) struct v4l2_cropcap *cap = &cptr->hdw->cropcap_info; int stat = pvr2_hdw_check_cropcap(cptr->hdw); if (stat != 0) { - /* Keep checkpatch.pl quiet */ return stat; } *val = cap->bounds.height; @@ -545,7 +530,6 @@ static int ctrl_get_cropcapdl(struct pvr2_ctrl *cptr, int *val) struct v4l2_cropcap *cap = &cptr->hdw->cropcap_info; int stat = pvr2_hdw_check_cropcap(cptr->hdw); if (stat != 0) { - /* Keep checkpatch.pl quiet */ return stat; } *val = cap->defrect.left; @@ -557,7 +541,6 @@ static int ctrl_get_cropcapdt(struct pvr2_ctrl *cptr, int *val) struct v4l2_cropcap *cap = &cptr->hdw->cropcap_info; int stat = pvr2_hdw_check_cropcap(cptr->hdw); if (stat != 0) { - /* Keep checkpatch.pl quiet */ return stat; } *val = cap->defrect.top; @@ -569,7 +552,6 @@ static int ctrl_get_cropcapdw(struct pvr2_ctrl *cptr, int *val) struct v4l2_cropcap *cap = &cptr->hdw->cropcap_info; int stat = pvr2_hdw_check_cropcap(cptr->hdw); if (stat != 0) { - /* Keep checkpatch.pl quiet */ return stat; } *val = cap->defrect.width; @@ -581,7 +563,6 @@ static int ctrl_get_cropcapdh(struct pvr2_ctrl *cptr, int *val) struct v4l2_cropcap *cap = &cptr->hdw->cropcap_info; int stat = pvr2_hdw_check_cropcap(cptr->hdw); if (stat != 0) { - /* Keep checkpatch.pl quiet */ return stat; } *val = cap->defrect.height; @@ -593,7 +574,6 @@ static int ctrl_get_cropcappan(struct pvr2_ctrl *cptr, int *val) struct v4l2_cropcap *cap = &cptr->hdw->cropcap_info; int stat = pvr2_hdw_check_cropcap(cptr->hdw); if (stat != 0) { - /* Keep checkpatch.pl quiet */ return stat; } *val = cap->pixelaspect.numerator; @@ -605,7 +585,6 @@ static int ctrl_get_cropcappad(struct pvr2_ctrl *cptr, int *val) struct v4l2_cropcap *cap = &cptr->hdw->cropcap_info; int stat = pvr2_hdw_check_cropcap(cptr->hdw); if (stat != 0) { - /* Keep checkpatch.pl quiet */ return stat; } *val = cap->pixelaspect.denominator; @@ -3008,12 +2987,10 @@ void pvr2_hdw_execute_tuner_poll(struct pvr2_hdw *hdw) static int pvr2_hdw_check_cropcap(struct pvr2_hdw *hdw) { if (!hdw->cropcap_stale) { - /* Keep checkpatch.pl quiet */ return 0; } pvr2_i2c_core_status_poll(hdw); if (hdw->cropcap_stale) { - /* Keep checkpatch.pl quiet */ return -EIO; } return 0; @@ -3027,7 +3004,6 @@ int pvr2_hdw_get_cropcap(struct pvr2_hdw *hdw, struct v4l2_cropcap *pp) LOCK_TAKE(hdw->big_lock); stat = pvr2_hdw_check_cropcap(hdw); if (!stat) { - /* Keep checkpatch.pl quiet */ memcpy(pp, &hdw->cropcap_info, sizeof(hdw->cropcap_info)); } LOCK_GIVE(hdw->big_lock); diff --git a/drivers/media/video/pvrusb2/pvrusb2-i2c-cmd-v4l2.c b/drivers/media/video/pvrusb2/pvrusb2-i2c-cmd-v4l2.c index 543fa30..16bb119 100644 --- a/drivers/media/video/pvrusb2/pvrusb2-i2c-cmd-v4l2.c +++ b/drivers/media/video/pvrusb2/pvrusb2-i2c-cmd-v4l2.c @@ -254,12 +254,8 @@ static void set_crop(struct pvr2_hdw *hdw) static int check_crop(struct pvr2_hdw *hdw) { - /* The "0 +" stupidity is present only to get checkpatch.pl to - shut up. I _want_ those parantheses present so that the - two lines automatically line up in my editor. I despise - checkpatch.pl. */ - return 0 + (hdw->cropl_dirty || hdw->cropt_dirty || - hdw->cropw_dirty || hdw->croph_dirty); + return (hdw->cropl_dirty || hdw->cropt_dirty || + hdw->cropw_dirty || hdw->croph_dirty); } const struct pvr2_i2c_op pvr2_i2c_op_v4l2_crop = { diff --git a/drivers/media/video/pvrusb2/pvrusb2-i2c-core.c b/drivers/media/video/pvrusb2/pvrusb2-i2c-core.c index 72d615a..77289a1 100644 --- a/drivers/media/video/pvrusb2/pvrusb2-i2c-core.c +++ b/drivers/media/video/pvrusb2/pvrusb2-i2c-core.c @@ -992,8 +992,6 @@ void pvr2_i2c_core_init(struct pvr2_hdw *hdw) hdw->i2c_func[0x18] = i2c_black_hole; } else if (ir_mode[hdw->unit_number] == 1) { if (hdw->hdw_desc->ir_scheme == PVR2_IR_SCHEME_24XXX) { - /* This comment is present PURELY to get - checkpatch.pl to STFU. Lovely, eh? */ hdw->i2c_func[0x18] = i2c_24xxx_ir; } } diff --git a/drivers/media/video/pvrusb2/pvrusb2-sysfs.c b/drivers/media/video/pvrusb2/pvrusb2-sysfs.c index ac01b11..733680f 100644 --- a/drivers/media/video/pvrusb2/pvrusb2-sysfs.c +++ b/drivers/media/video/pvrusb2/pvrusb2-sysfs.c @@ -158,7 +158,6 @@ static ssize_t show_def(struct device *class_dev, pvr2_sysfs_trace("pvr2_sysfs(%p) show_def(cid=%d) is %d, stat=%d", cip->chptr, cip->ctl_id, val, ret); if (ret < 0) { - /* Keep checkpatch.pl quiet */ return ret; } return scnprintf(buf, PAGE_SIZE, "%d\n", val); -- cgit v0.10.2 From d45b9b8ab43c8973a9630ac54f4ede6c3e009f9e Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Thu, 4 Sep 2008 03:33:43 -0300 Subject: V4L/DVB (8906): v4l-dvb: fix assorted sparse warnings Fix sparse warnings. None are serious, but cutting down on these helps find future serious sparse warnings/errors. Redid the av7710.c patch based on a suggestion by Oliver Endriss. Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/dvb/dvb-usb/af9005-remote.c b/drivers/media/dvb/dvb-usb/af9005-remote.c index ff00c0e..7c596f9 100644 --- a/drivers/media/dvb/dvb-usb/af9005-remote.c +++ b/drivers/media/dvb/dvb-usb/af9005-remote.c @@ -25,7 +25,7 @@ */ #include "af9005.h" /* debug */ -int dvb_usb_af9005_remote_debug; +static int dvb_usb_af9005_remote_debug; module_param_named(debug, dvb_usb_af9005_remote_debug, int, 0644); MODULE_PARM_DESC(debug, "enable (1) or disable (0) debug messages." diff --git a/drivers/media/dvb/dvb-usb/af9005-script.h b/drivers/media/dvb/dvb-usb/af9005-script.h index 6eeaae5..4d69045 100644 --- a/drivers/media/dvb/dvb-usb/af9005-script.h +++ b/drivers/media/dvb/dvb-usb/af9005-script.h @@ -14,7 +14,7 @@ typedef struct { u8 val; } RegDesc; -RegDesc script[] = { +static RegDesc script[] = { {0xa180, 0x0, 0x8, 0xa}, {0xa181, 0x0, 0x8, 0xd7}, {0xa182, 0x0, 0x8, 0xa3}, diff --git a/drivers/media/dvb/dvb-usb/af9005.c b/drivers/media/dvb/dvb-usb/af9005.c index cfe71fe..ca5a0a4 100644 --- a/drivers/media/dvb/dvb-usb/af9005.c +++ b/drivers/media/dvb/dvb-usb/af9005.c @@ -35,17 +35,17 @@ module_param_named(led, dvb_usb_af9005_led, bool, 0644); MODULE_PARM_DESC(led, "enable led (default: 1)."); /* eeprom dump */ -int dvb_usb_af9005_dump_eeprom = 0; +static int dvb_usb_af9005_dump_eeprom; module_param_named(dump_eeprom, dvb_usb_af9005_dump_eeprom, int, 0); MODULE_PARM_DESC(dump_eeprom, "dump contents of the eeprom."); DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); /* remote control decoder */ -int (*rc_decode) (struct dvb_usb_device * d, u8 * data, int len, u32 * event, - int *state); -void *rc_keys; -int *rc_keys_size; +static int (*rc_decode) (struct dvb_usb_device *d, u8 *data, int len, + u32 *event, int *state); +static void *rc_keys; +static int *rc_keys_size; u8 regmask[8] = { 0x01, 0x03, 0x07, 0x0f, 0x1f, 0x3f, 0x7f, 0xff }; @@ -54,8 +54,8 @@ struct af9005_device_state { int led_state; }; -int af9005_usb_generic_rw(struct dvb_usb_device *d, u8 * wbuf, u16 wlen, - u8 * rbuf, u16 rlen, int delay_ms) +static int af9005_usb_generic_rw(struct dvb_usb_device *d, u8 *wbuf, u16 wlen, + u8 *rbuf, u16 rlen, int delay_ms) { int actlen, ret = -ENOMEM; @@ -98,12 +98,7 @@ int af9005_usb_generic_rw(struct dvb_usb_device *d, u8 * wbuf, u16 wlen, return ret; } -int af9005_usb_generic_write(struct dvb_usb_device *d, u8 * buf, u16 len) -{ - return af9005_usb_generic_rw(d, buf, len, NULL, 0, 0); -} - -int af9005_generic_read_write(struct dvb_usb_device *d, u16 reg, +static int af9005_generic_read_write(struct dvb_usb_device *d, u16 reg, int readwrite, int type, u8 * values, int len) { struct af9005_device_state *st = d->priv; @@ -765,7 +760,7 @@ static int af9005_boot_packet(struct usb_device *udev, int type, u8 * reply) return 0; } -int af9005_download_firmware(struct usb_device *udev, const struct firmware *fw) +static int af9005_download_firmware(struct usb_device *udev, const struct firmware *fw) { int i, packets, ret, act_len; diff --git a/drivers/media/dvb/frontends/cx24110.h b/drivers/media/dvb/frontends/cx24110.h index 1792adb..fdcceee 100644 --- a/drivers/media/dvb/frontends/cx24110.h +++ b/drivers/media/dvb/frontends/cx24110.h @@ -33,12 +33,17 @@ struct cx24110_config u8 demod_address; }; -static inline int cx24110_pll_write(struct dvb_frontend *fe, u32 val) { - int r = 0; - u8 buf[] = {(u8) (val>>24), (u8) (val>>16), (u8) (val>>8)}; +static inline int cx24110_pll_write(struct dvb_frontend *fe, u32 val) +{ + u8 buf[] = { + (u8)((val >> 24) & 0xff), + (u8)((val >> 16) & 0xff), + (u8)((val >> 8) & 0xff) + }; + if (fe->ops.write) - r = fe->ops.write(fe, buf, 3); - return r; + return fe->ops.write(fe, buf, 3); + return 0; } #if defined(CONFIG_DVB_CX24110) || (defined(CONFIG_DVB_CX24110_MODULE) && defined(MODULE)) diff --git a/drivers/media/dvb/frontends/dib7000m.c b/drivers/media/dvb/frontends/dib7000m.c index 5f1375e..4de0fa9 100644 --- a/drivers/media/dvb/frontends/dib7000m.c +++ b/drivers/media/dvb/frontends/dib7000m.c @@ -1284,7 +1284,8 @@ struct i2c_adapter * dib7000m_get_i2c_master(struct dvb_frontend *demod, enum di } EXPORT_SYMBOL(dib7000m_get_i2c_master); -int dib7000m_i2c_enumeration(struct i2c_adapter *i2c, int no_of_demods, u8 default_addr, struct dib7000m_config cfg[]) +static int dib7000m_i2c_enumeration(struct i2c_adapter *i2c, int no_of_demods, + u8 default_addr, struct dib7000m_config cfg[]) { struct dib7000m_state st = { .i2c_adap = i2c }; int k = 0; diff --git a/drivers/media/dvb/frontends/dvb_dummy_fe.c b/drivers/media/dvb/frontends/dvb_dummy_fe.c index cb4d8a3..db8a937 100644 --- a/drivers/media/dvb/frontends/dvb_dummy_fe.c +++ b/drivers/media/dvb/frontends/dvb_dummy_fe.c @@ -132,7 +132,7 @@ error: static struct dvb_frontend_ops dvb_dummy_fe_qpsk_ops; -struct dvb_frontend* dvb_dummy_fe_qpsk_attach() +struct dvb_frontend *dvb_dummy_fe_qpsk_attach(void) { struct dvb_dummy_fe_state* state = NULL; @@ -152,7 +152,7 @@ error: static struct dvb_frontend_ops dvb_dummy_fe_qam_ops; -struct dvb_frontend* dvb_dummy_fe_qam_attach() +struct dvb_frontend *dvb_dummy_fe_qam_attach(void) { struct dvb_dummy_fe_state* state = NULL; diff --git a/drivers/media/dvb/frontends/sp887x.c b/drivers/media/dvb/frontends/sp887x.c index 4543609..559509a 100644 --- a/drivers/media/dvb/frontends/sp887x.c +++ b/drivers/media/dvb/frontends/sp887x.c @@ -337,7 +337,8 @@ static int sp887x_setup_frontend_parameters (struct dvb_frontend* fe, struct dvb_frontend_parameters *p) { struct sp887x_state* state = fe->demodulator_priv; - int actual_freq, err; + unsigned actual_freq; + int err; u16 val, reg0xc05; if (p->u.ofdm.bandwidth != BANDWIDTH_8_MHZ && diff --git a/drivers/media/dvb/ttpci/av7110.c b/drivers/media/dvb/ttpci/av7110.c index 404108f..c7c770c 100644 --- a/drivers/media/dvb/ttpci/av7110.c +++ b/drivers/media/dvb/ttpci/av7110.c @@ -381,9 +381,9 @@ static inline void start_debi_dma(struct av7110 *av7110, int dir, irdebi(av7110, DEBISWAB, addr, 0, len); } -static void debiirq(unsigned long data) +static void debiirq(unsigned long cookie) { - struct av7110 *av7110 = (struct av7110 *) data; + struct av7110 *av7110 = (struct av7110 *)cookie; int type = av7110->debitype; int handle = (type >> 8) & 0x1f; unsigned int xfer = 0; @@ -492,9 +492,9 @@ debi_done: } /* irq from av7110 firmware writing the mailbox register in the DPRAM */ -static void gpioirq(unsigned long data) +static void gpioirq(unsigned long cookie) { - struct av7110 *av7110 = (struct av7110 *) data; + struct av7110 *av7110 = (struct av7110 *)cookie; u32 rxbuf, txbuf; int len; @@ -1260,9 +1260,9 @@ static int budget_stop_feed(struct dvb_demux_feed *feed) return status; } -static void vpeirq(unsigned long data) +static void vpeirq(unsigned long cookie) { - struct av7110 *budget = (struct av7110 *) data; + struct av7110 *budget = (struct av7110 *)cookie; u8 *mem = (u8 *) (budget->grabbing); u32 olddma = budget->ttbp; u32 newdma = saa7146_read(budget->dev, PCI_VDP3); diff --git a/drivers/media/video/cpia2/cpia2_core.c b/drivers/media/video/cpia2/cpia2_core.c index af8b9ec..7e791b6 100644 --- a/drivers/media/video/cpia2/cpia2_core.c +++ b/drivers/media/video/cpia2/cpia2_core.c @@ -1537,7 +1537,7 @@ static int config_sensor_500(struct camera_data *cam, * * This sets all user changeable properties to the values in cam->params. *****************************************************************************/ -int set_all_properties(struct camera_data *cam) +static int set_all_properties(struct camera_data *cam) { /** * Don't set target_kb here, it will be set later. @@ -1588,7 +1588,7 @@ void cpia2_save_camera_state(struct camera_data *cam) * get_color_params * *****************************************************************************/ -void get_color_params(struct camera_data *cam) +static void get_color_params(struct camera_data *cam) { cpia2_do_command(cam, CPIA2_CMD_GET_VP_BRIGHTNESS, TRANSFER_READ, 0); cpia2_do_command(cam, CPIA2_CMD_GET_VP_SATURATION, TRANSFER_READ, 0); @@ -1881,7 +1881,7 @@ void cpia2_set_saturation(struct camera_data *cam, unsigned char value) * wake_system * *****************************************************************************/ -void wake_system(struct camera_data *cam) +static void wake_system(struct camera_data *cam) { cpia2_do_command(cam, CPIA2_CMD_SET_WAKEUP, TRANSFER_WRITE, 0); } @@ -1892,7 +1892,7 @@ void wake_system(struct camera_data *cam) * * Valid for STV500 sensor only *****************************************************************************/ -void set_lowlight_boost(struct camera_data *cam) +static void set_lowlight_boost(struct camera_data *cam) { struct cpia2_command cmd; @@ -2169,7 +2169,7 @@ void cpia2_dbg_dump_registers(struct camera_data *cam) * * Sets all values to the defaults *****************************************************************************/ -void reset_camera_struct(struct camera_data *cam) +static void reset_camera_struct(struct camera_data *cam) { /*** * The following parameter values are the defaults from the register map. diff --git a/drivers/media/video/cpia2/cpia2_usb.c b/drivers/media/video/cpia2/cpia2_usb.c index a8a1990..73511a5 100644 --- a/drivers/media/video/cpia2/cpia2_usb.c +++ b/drivers/media/video/cpia2/cpia2_usb.c @@ -478,7 +478,7 @@ int cpia2_usb_change_streaming_alternate(struct camera_data *cam, * set_alternate * *****************************************************************************/ -int set_alternate(struct camera_data *cam, unsigned int alt) +static int set_alternate(struct camera_data *cam, unsigned int alt) { int ret = 0; diff --git a/drivers/media/video/cx23885/cx23885-417.c b/drivers/media/video/cx23885/cx23885-417.c index 93777d0..e54df81 100644 --- a/drivers/media/video/cx23885/cx23885-417.c +++ b/drivers/media/video/cx23885/cx23885-417.c @@ -632,7 +632,7 @@ int mc417_memory_read(struct cx23885_dev *dev, u32 address, u32 *value) /* ------------------------------------------------------------------ */ /* MPEG encoder API */ -char *cmd_to_str(int cmd) +static char *cmd_to_str(int cmd) { switch (cmd) { case CX2341X_ENC_PING_FW: diff --git a/drivers/media/video/cx23885/cx23885-vbi.c b/drivers/media/video/cx23885/cx23885-vbi.c index 35e61cd..5b297f0 100644 --- a/drivers/media/video/cx23885/cx23885-vbi.c +++ b/drivers/media/video/cx23885/cx23885-vbi.c @@ -85,18 +85,8 @@ static int cx23885_start_vbi_dma(struct cx23885_dev *dev, return 0; } -int cx23885_stop_vbi_dma(struct cx23885_dev *dev) -{ - /* stop dma */ - cx_clear(VID_A_DMA_CTL, 0x00000022); - - /* disable irqs */ - cx_clear(PCI_INT_MSK, 0x000001); - cx_clear(VID_A_INT_MSK, 0x00000022); - return 0; -} -int cx23885_restart_vbi_queue(struct cx23885_dev *dev, +static int cx23885_restart_vbi_queue(struct cx23885_dev *dev, struct cx23885_dmaqueue *q) { struct cx23885_buffer *buf; diff --git a/drivers/media/video/cx23885/cx23885-video.c b/drivers/media/video/cx23885/cx23885-video.c index d9bef1a..f75ed1c 100644 --- a/drivers/media/video/cx23885/cx23885-video.c +++ b/drivers/media/video/cx23885/cx23885-video.c @@ -244,7 +244,7 @@ static struct cx23885_ctrl cx23885_ctls[] = { }; static const int CX23885_CTLS = ARRAY_SIZE(cx23885_ctls); -const u32 cx23885_user_ctrls[] = { +static const u32 cx23885_user_ctrls[] = { V4L2_CID_USER_CLASS, V4L2_CID_BRIGHTNESS, V4L2_CID_CONTRAST, @@ -254,14 +254,13 @@ const u32 cx23885_user_ctrls[] = { V4L2_CID_AUDIO_MUTE, 0 }; -EXPORT_SYMBOL(cx23885_user_ctrls); static const u32 *ctrl_classes[] = { cx23885_user_ctrls, NULL }; -void cx23885_video_wakeup(struct cx23885_dev *dev, +static void cx23885_video_wakeup(struct cx23885_dev *dev, struct cx23885_dmaqueue *q, u32 count) { struct cx23885_buffer *buf; @@ -296,7 +295,7 @@ void cx23885_video_wakeup(struct cx23885_dev *dev, __func__, bc); } -int cx23885_set_tvnorm(struct cx23885_dev *dev, v4l2_std_id norm) +static int cx23885_set_tvnorm(struct cx23885_dev *dev, v4l2_std_id norm) { dprintk(1, "%s(norm = 0x%08x) name: [%s]\n", __func__, @@ -314,7 +313,7 @@ int cx23885_set_tvnorm(struct cx23885_dev *dev, v4l2_std_id norm) return 0; } -struct video_device *cx23885_vdev_init(struct cx23885_dev *dev, +static struct video_device *cx23885_vdev_init(struct cx23885_dev *dev, struct pci_dev *pci, struct video_device *template, char *type) @@ -334,7 +333,7 @@ struct video_device *cx23885_vdev_init(struct cx23885_dev *dev, return vfd; } -int cx23885_ctrl_query(struct v4l2_queryctrl *qctrl) +static int cx23885_ctrl_query(struct v4l2_queryctrl *qctrl) { int i; @@ -351,7 +350,6 @@ int cx23885_ctrl_query(struct v4l2_queryctrl *qctrl) *qctrl = cx23885_ctls[i].v; return 0; } -EXPORT_SYMBOL(cx23885_ctrl_query); /* ------------------------------------------------------------------- */ /* resource management */ @@ -402,7 +400,7 @@ static void res_free(struct cx23885_dev *dev, struct cx23885_fh *fh, mutex_unlock(&dev->lock); } -int cx23885_video_mux(struct cx23885_dev *dev, unsigned int input) +static int cx23885_video_mux(struct cx23885_dev *dev, unsigned int input) { struct v4l2_routing route; memset(&route, 0, sizeof(route)); @@ -422,10 +420,9 @@ int cx23885_video_mux(struct cx23885_dev *dev, unsigned int input) return 0; } -EXPORT_SYMBOL(cx23885_video_mux); /* ------------------------------------------------------------------ */ -int cx23885_set_scale(struct cx23885_dev *dev, unsigned int width, +static int cx23885_set_scale(struct cx23885_dev *dev, unsigned int width, unsigned int height, enum v4l2_field field) { dprintk(1, "%s()\n", __func__); @@ -890,21 +887,19 @@ static int video_mmap(struct file *file, struct vm_area_struct *vma) /* ------------------------------------------------------------------ */ /* VIDEO CTRL IOCTLS */ -int cx23885_get_control(struct cx23885_dev *dev, struct v4l2_control *ctl) +static int cx23885_get_control(struct cx23885_dev *dev, struct v4l2_control *ctl) { dprintk(1, "%s() calling cx25840(VIDIOC_G_CTRL)\n", __func__); cx23885_call_i2c_clients(&dev->i2c_bus[2], VIDIOC_G_CTRL, ctl); return 0; } -EXPORT_SYMBOL(cx23885_get_control); -int cx23885_set_control(struct cx23885_dev *dev, struct v4l2_control *ctl) +static int cx23885_set_control(struct cx23885_dev *dev, struct v4l2_control *ctl) { dprintk(1, "%s() calling cx25840(VIDIOC_S_CTRL)" " (disabled - no action)\n", __func__); return 0; } -EXPORT_SYMBOL(cx23885_set_control); static void init_controls(struct cx23885_dev *dev) { @@ -1152,7 +1147,7 @@ static int vidioc_s_std(struct file *file, void *priv, v4l2_std_id *tvnorms) return 0; } -int cx23885_enum_input(struct cx23885_dev *dev, struct v4l2_input *i) +static int cx23885_enum_input(struct cx23885_dev *dev, struct v4l2_input *i) { static const char *iname[] = { [CX23885_VMUX_COMPOSITE1] = "Composite1", @@ -1185,7 +1180,6 @@ int cx23885_enum_input(struct cx23885_dev *dev, struct v4l2_input *i) i->std = CX23885_NORMS; return 0; } -EXPORT_SYMBOL(cx23885_enum_input); static int vidioc_enum_input(struct file *file, void *priv, struct v4l2_input *i) @@ -1294,7 +1288,7 @@ static int vidioc_g_frequency(struct file *file, void *priv, return 0; } -int cx23885_set_freq(struct cx23885_dev *dev, struct v4l2_frequency *f) +static int cx23885_set_freq(struct cx23885_dev *dev, struct v4l2_frequency *f) { if (unlikely(UNSET == dev->tuner_type)) return -EINVAL; @@ -1313,7 +1307,6 @@ int cx23885_set_freq(struct cx23885_dev *dev, struct v4l2_frequency *f) return 0; } -EXPORT_SYMBOL(cx23885_set_freq); static int vidioc_s_frequency(struct file *file, void *priv, struct v4l2_frequency *f) diff --git a/drivers/media/video/em28xx/em28xx-dvb.c b/drivers/media/video/em28xx/em28xx-dvb.c index d2b1a1a..ea4f2a9 100644 --- a/drivers/media/video/em28xx/em28xx-dvb.c +++ b/drivers/media/video/em28xx/em28xx-dvb.c @@ -274,7 +274,7 @@ static int attach_xc3028(u8 addr, struct em28xx *dev) /* ------------------------------------------------------------------ */ -int register_dvb(struct em28xx_dvb *dvb, +static int register_dvb(struct em28xx_dvb *dvb, struct module *module, struct em28xx *dev, struct device *device) diff --git a/drivers/media/video/em28xx/em28xx-i2c.c b/drivers/media/video/em28xx/em28xx-i2c.c index 9785338..2989a65 100644 --- a/drivers/media/video/em28xx/em28xx-i2c.c +++ b/drivers/media/video/em28xx/em28xx-i2c.c @@ -143,10 +143,11 @@ static int em2800_i2c_check_for_device(struct em28xx *dev, unsigned char addr) } for (write_timeout = EM2800_I2C_WRITE_TIMEOUT; write_timeout > 0; write_timeout -= 5) { - unsigned msg = dev->em28xx_read_reg(dev, 0x5); - if (msg == 0x94) + unsigned reg = dev->em28xx_read_reg(dev, 0x5); + + if (reg == 0x94) return -ENODEV; - else if (msg == 0x84) + else if (reg == 0x84) return 0; msleep(5); } diff --git a/drivers/media/video/em28xx/em28xx.h b/drivers/media/video/em28xx/em28xx.h index 9a33107..d992280 100644 --- a/drivers/media/video/em28xx/em28xx.h +++ b/drivers/media/video/em28xx/em28xx.h @@ -411,8 +411,8 @@ struct em28xx { /* frame properties */ int width; /* current frame width */ int height; /* current frame height */ - int hscale; /* horizontal scale factor (see datasheet) */ - int vscale; /* vertical scale factor (see datasheet) */ + unsigned hscale; /* horizontal scale factor (see datasheet) */ + unsigned vscale; /* vertical scale factor (see datasheet) */ int interlaced; /* 1=interlace fileds, 0=just top fileds */ unsigned int video_bytesread; /* Number of bytes read */ diff --git a/drivers/media/video/gspca/sonixb.c b/drivers/media/video/gspca/sonixb.c index 12b81ae..4328ad4 100644 --- a/drivers/media/video/gspca/sonixb.c +++ b/drivers/media/video/gspca/sonixb.c @@ -490,7 +490,7 @@ static const __u8 tas5130_sensor_init[][8] = { {0x30, 0x11, 0x02, 0x20, 0x70, 0x00, 0x00, 0x10}, }; -struct sensor_data sensor_data[] = { +static struct sensor_data sensor_data[] = { SENS(initHv7131, NULL, hv7131_sensor_init, NULL, NULL, 0, NO_EXPO|NO_FREQ, 0), SENS(initOv6650, NULL, ov6650_sensor_init, NULL, NULL, F_GAIN|F_SIF, 0, 0x60), SENS(initOv7630, initOv7630_3, ov7630_sensor_init, NULL, ov7630_sensor_init_3, diff --git a/drivers/media/video/gspca/vc032x.c b/drivers/media/video/gspca/vc032x.c index bd4c226..0c68f43 100644 --- a/drivers/media/video/gspca/vc032x.c +++ b/drivers/media/video/gspca/vc032x.c @@ -80,7 +80,6 @@ static struct ctrl sd_ctrls[] = { .step = 1, #define FREQ_DEF 1 .default_value = FREQ_DEF, - .default_value = 1, }, .set = sd_setfreq, .get = sd_getfreq, diff --git a/drivers/media/video/ovcamchip/ovcamchip_core.c b/drivers/media/video/ovcamchip/ovcamchip_core.c index 065c245..2c4acbf 100644 --- a/drivers/media/video/ovcamchip/ovcamchip_core.c +++ b/drivers/media/video/ovcamchip/ovcamchip_core.c @@ -49,12 +49,6 @@ MODULE_LICENSE("GPL"); #define GENERIC_REG_ID_LOW 0x1D /* manufacturer ID LSB */ #define GENERIC_REG_COM_I 0x29 /* misc ID bits */ -extern struct ovcamchip_ops ov6x20_ops; -extern struct ovcamchip_ops ov6x30_ops; -extern struct ovcamchip_ops ov7x10_ops; -extern struct ovcamchip_ops ov7x20_ops; -extern struct ovcamchip_ops ov76be_ops; - static char *chip_names[NUM_CC_TYPES] = { [CC_UNKNOWN] = "Unknown chip", [CC_OV76BE] = "OV76BE", diff --git a/drivers/media/video/ovcamchip/ovcamchip_priv.h b/drivers/media/video/ovcamchip/ovcamchip_priv.h index 9afa4fe..a05650f 100644 --- a/drivers/media/video/ovcamchip/ovcamchip_priv.h +++ b/drivers/media/video/ovcamchip/ovcamchip_priv.h @@ -53,6 +53,12 @@ struct ovcamchip { int initialized; /* OVCAMCHIP_CMD_INITIALIZE was successful */ }; +extern struct ovcamchip_ops ov6x20_ops; +extern struct ovcamchip_ops ov6x30_ops; +extern struct ovcamchip_ops ov7x10_ops; +extern struct ovcamchip_ops ov7x20_ops; +extern struct ovcamchip_ops ov76be_ops; + /* --------------------------------- */ /* I2C I/O */ /* --------------------------------- */ diff --git a/drivers/media/video/pvrusb2/pvrusb2-i2c-core.c b/drivers/media/video/pvrusb2/pvrusb2-i2c-core.c index 77289a1..d6a3540 100644 --- a/drivers/media/video/pvrusb2/pvrusb2-i2c-core.c +++ b/drivers/media/video/pvrusb2/pvrusb2-i2c-core.c @@ -827,7 +827,7 @@ static unsigned int pvr2_i2c_client_describe(struct pvr2_i2c_client *cp, if ((detail & PVR2_I2C_DETAIL_CTLMASK) && cp->ctl_mask) { unsigned int idx; unsigned long msk,sm; - int spcfl; + bcnt = scnprintf(buf,maxlen," ["); ccnt += bcnt; buf += bcnt; maxlen -= bcnt; sm = 0; diff --git a/drivers/media/video/s2255drv.c b/drivers/media/video/s2255drv.c index b8e1045..5272926 100644 --- a/drivers/media/video/s2255drv.c +++ b/drivers/media/video/s2255drv.c @@ -491,7 +491,7 @@ static void planar422p_to_yuv_packed(const unsigned char *in, return; } -void s2255_reset_dsppower(struct s2255_dev *dev) +static void s2255_reset_dsppower(struct s2255_dev *dev) { s2255_vendor_req(dev, 0x40, 0x0b0b, 0x0b0b, NULL, 0, 1); msleep(10); diff --git a/drivers/media/video/sn9c102/sn9c102_core.c b/drivers/media/video/sn9c102/sn9c102_core.c index 4b76c45..20e30bd 100644 --- a/drivers/media/video/sn9c102/sn9c102_core.c +++ b/drivers/media/video/sn9c102/sn9c102_core.c @@ -116,6 +116,26 @@ MODULE_PARM_DESC(debug, "\n"); #endif +/* + Add the probe entries to this table. Be sure to add the entry in the right + place, since, on failure, the next probing routine is called according to + the order of the list below, from top to bottom. +*/ +static int (*sn9c102_sensor_table[])(struct sn9c102_device *) = { + &sn9c102_probe_hv7131d, /* strong detection based on SENSOR ids */ + &sn9c102_probe_hv7131r, /* strong detection based on SENSOR ids */ + &sn9c102_probe_mi0343, /* strong detection based on SENSOR ids */ + &sn9c102_probe_mi0360, /* strong detection based on SENSOR ids */ + &sn9c102_probe_mt9v111, /* strong detection based on SENSOR ids */ + &sn9c102_probe_pas106b, /* strong detection based on SENSOR ids */ + &sn9c102_probe_pas202bcb, /* strong detection based on SENSOR ids */ + &sn9c102_probe_ov7630, /* strong detection based on SENSOR ids */ + &sn9c102_probe_ov7660, /* strong detection based on SENSOR ids */ + &sn9c102_probe_tas5110c1b, /* detection based on USB pid/vid */ + &sn9c102_probe_tas5110d, /* detection based on USB pid/vid */ + &sn9c102_probe_tas5130d1b, /* detection based on USB pid/vid */ +}; + /*****************************************************************************/ static u32 diff --git a/drivers/media/video/sn9c102/sn9c102_devtable.h b/drivers/media/video/sn9c102/sn9c102_devtable.h index 90a401d..e23734f 100644 --- a/drivers/media/video/sn9c102/sn9c102_devtable.h +++ b/drivers/media/video/sn9c102/sn9c102_devtable.h @@ -140,24 +140,4 @@ extern int sn9c102_probe_tas5110c1b(struct sn9c102_device* cam); extern int sn9c102_probe_tas5110d(struct sn9c102_device* cam); extern int sn9c102_probe_tas5130d1b(struct sn9c102_device* cam); -/* - Add the above entries to this table. Be sure to add the entry in the right - place, since, on failure, the next probing routine is called according to - the order of the list below, from top to bottom. -*/ -static int (*sn9c102_sensor_table[])(struct sn9c102_device*) = { - &sn9c102_probe_hv7131d, /* strong detection based on SENSOR ids */ - &sn9c102_probe_hv7131r, /* strong detection based on SENSOR ids */ - &sn9c102_probe_mi0343, /* strong detection based on SENSOR ids */ - &sn9c102_probe_mi0360, /* strong detection based on SENSOR ids */ - &sn9c102_probe_mt9v111, /* strong detection based on SENSOR ids */ - &sn9c102_probe_pas106b, /* strong detection based on SENSOR ids */ - &sn9c102_probe_pas202bcb, /* strong detection based on SENSOR ids */ - &sn9c102_probe_ov7630, /* strong detection based on SENSOR ids */ - &sn9c102_probe_ov7660, /* strong detection based on SENSOR ids */ - &sn9c102_probe_tas5110c1b, /* detection based on USB pid/vid */ - &sn9c102_probe_tas5110d, /* detection based on USB pid/vid */ - &sn9c102_probe_tas5130d1b, /* detection based on USB pid/vid */ -}; - #endif /* _SN9C102_DEVTABLE_H_ */ diff --git a/drivers/media/video/sn9c102/sn9c102_hv7131d.c b/drivers/media/video/sn9c102/sn9c102_hv7131d.c index eaf9ad0..db24349 100644 --- a/drivers/media/video/sn9c102/sn9c102_hv7131d.c +++ b/drivers/media/video/sn9c102/sn9c102_hv7131d.c @@ -20,6 +20,7 @@ ***************************************************************************/ #include "sn9c102_sensor.h" +#include "sn9c102_devtable.h" static int hv7131d_init(struct sn9c102_device* cam) diff --git a/drivers/media/video/sn9c102/sn9c102_hv7131r.c b/drivers/media/video/sn9c102/sn9c102_hv7131r.c index 0fc4012..4295887 100644 --- a/drivers/media/video/sn9c102/sn9c102_hv7131r.c +++ b/drivers/media/video/sn9c102/sn9c102_hv7131r.c @@ -20,6 +20,7 @@ ***************************************************************************/ #include "sn9c102_sensor.h" +#include "sn9c102_devtable.h" static int hv7131r_init(struct sn9c102_device* cam) diff --git a/drivers/media/video/sn9c102/sn9c102_mi0343.c b/drivers/media/video/sn9c102/sn9c102_mi0343.c index 00b134c..1f5b09b 100644 --- a/drivers/media/video/sn9c102/sn9c102_mi0343.c +++ b/drivers/media/video/sn9c102/sn9c102_mi0343.c @@ -20,6 +20,7 @@ ***************************************************************************/ #include "sn9c102_sensor.h" +#include "sn9c102_devtable.h" static int mi0343_init(struct sn9c102_device* cam) diff --git a/drivers/media/video/sn9c102/sn9c102_mi0360.c b/drivers/media/video/sn9c102/sn9c102_mi0360.c index f8d81d8..d973fc1 100644 --- a/drivers/media/video/sn9c102/sn9c102_mi0360.c +++ b/drivers/media/video/sn9c102/sn9c102_mi0360.c @@ -20,6 +20,7 @@ ***************************************************************************/ #include "sn9c102_sensor.h" +#include "sn9c102_devtable.h" static int mi0360_init(struct sn9c102_device* cam) diff --git a/drivers/media/video/sn9c102/sn9c102_mt9v111.c b/drivers/media/video/sn9c102/sn9c102_mt9v111.c index 3b98ac3..95986eb 100644 --- a/drivers/media/video/sn9c102/sn9c102_mt9v111.c +++ b/drivers/media/video/sn9c102/sn9c102_mt9v111.c @@ -20,6 +20,7 @@ ***************************************************************************/ #include "sn9c102_sensor.h" +#include "sn9c102_devtable.h" static int mt9v111_init(struct sn9c102_device *cam) diff --git a/drivers/media/video/sn9c102/sn9c102_ov7630.c b/drivers/media/video/sn9c102/sn9c102_ov7630.c index e4856fd..803712c 100644 --- a/drivers/media/video/sn9c102/sn9c102_ov7630.c +++ b/drivers/media/video/sn9c102/sn9c102_ov7630.c @@ -20,6 +20,7 @@ ***************************************************************************/ #include "sn9c102_sensor.h" +#include "sn9c102_devtable.h" static int ov7630_init(struct sn9c102_device* cam) diff --git a/drivers/media/video/sn9c102/sn9c102_ov7660.c b/drivers/media/video/sn9c102/sn9c102_ov7660.c index 8aae416..7977795 100644 --- a/drivers/media/video/sn9c102/sn9c102_ov7660.c +++ b/drivers/media/video/sn9c102/sn9c102_ov7660.c @@ -20,6 +20,7 @@ ***************************************************************************/ #include "sn9c102_sensor.h" +#include "sn9c102_devtable.h" static int ov7660_init(struct sn9c102_device* cam) diff --git a/drivers/media/video/sn9c102/sn9c102_pas106b.c b/drivers/media/video/sn9c102/sn9c102_pas106b.c index 360f2a8..81cd969 100644 --- a/drivers/media/video/sn9c102/sn9c102_pas106b.c +++ b/drivers/media/video/sn9c102/sn9c102_pas106b.c @@ -21,6 +21,7 @@ #include #include "sn9c102_sensor.h" +#include "sn9c102_devtable.h" static int pas106b_init(struct sn9c102_device* cam) diff --git a/drivers/media/video/sn9c102/sn9c102_pas202bcb.c b/drivers/media/video/sn9c102/sn9c102_pas202bcb.c index ca4a150..2782f94 100644 --- a/drivers/media/video/sn9c102/sn9c102_pas202bcb.c +++ b/drivers/media/video/sn9c102/sn9c102_pas202bcb.c @@ -26,6 +26,7 @@ #include #include "sn9c102_sensor.h" +#include "sn9c102_devtable.h" static int pas202bcb_init(struct sn9c102_device* cam) diff --git a/drivers/media/video/sn9c102/sn9c102_tas5110c1b.c b/drivers/media/video/sn9c102/sn9c102_tas5110c1b.c index e7d2de2..04cdfdd 100644 --- a/drivers/media/video/sn9c102/sn9c102_tas5110c1b.c +++ b/drivers/media/video/sn9c102/sn9c102_tas5110c1b.c @@ -20,6 +20,7 @@ ***************************************************************************/ #include "sn9c102_sensor.h" +#include "sn9c102_devtable.h" static int tas5110c1b_init(struct sn9c102_device* cam) diff --git a/drivers/media/video/sn9c102/sn9c102_tas5110d.c b/drivers/media/video/sn9c102/sn9c102_tas5110d.c index d32fdbc..9372e6f 100644 --- a/drivers/media/video/sn9c102/sn9c102_tas5110d.c +++ b/drivers/media/video/sn9c102/sn9c102_tas5110d.c @@ -20,6 +20,7 @@ ***************************************************************************/ #include "sn9c102_sensor.h" +#include "sn9c102_devtable.h" static int tas5110d_init(struct sn9c102_device* cam) diff --git a/drivers/media/video/sn9c102/sn9c102_tas5130d1b.c b/drivers/media/video/sn9c102/sn9c102_tas5130d1b.c index 56fb1d5..a30bbc4 100644 --- a/drivers/media/video/sn9c102/sn9c102_tas5130d1b.c +++ b/drivers/media/video/sn9c102/sn9c102_tas5130d1b.c @@ -20,6 +20,7 @@ ***************************************************************************/ #include "sn9c102_sensor.h" +#include "sn9c102_devtable.h" static int tas5130d1b_init(struct sn9c102_device* cam) diff --git a/drivers/media/video/zoran_device.c b/drivers/media/video/zoran_device.c index 2b3ca14..5d948ff 100644 --- a/drivers/media/video/zoran_device.c +++ b/drivers/media/video/zoran_device.c @@ -58,8 +58,6 @@ ZR36057_ISR_GIRQ1 | \ ZR36057_ISR_JPEGRepIRQ ) -extern const struct zoran_format zoran_formats[]; - static int lml33dpath; /* default = 0 * 1 will use digital path in capture * mode instead of analog. It can be diff --git a/drivers/media/video/zoran_device.h b/drivers/media/video/zoran_device.h index 37fa86a..74c6c8e 100644 --- a/drivers/media/video/zoran_device.h +++ b/drivers/media/video/zoran_device.h @@ -78,6 +78,14 @@ extern void zoran_set_pci_master(struct zoran *zr, extern void zoran_init_hardware(struct zoran *zr); extern void zr36057_restart(struct zoran *zr); +extern const struct zoran_format zoran_formats[]; + +extern int v4l_nbufs; +extern int v4l_bufsize; +extern int jpg_nbufs; +extern int jpg_bufsize; +extern int pass_through; + /* i2c */ extern int decoder_command(struct zoran *zr, int cmd, diff --git a/drivers/media/video/zoran_driver.c b/drivers/media/video/zoran_driver.c index 4aa1a76..f0af9b7 100644 --- a/drivers/media/video/zoran_driver.c +++ b/drivers/media/video/zoran_driver.c @@ -194,12 +194,6 @@ const struct zoran_format zoran_formats[] = { // RJ: Test only - want to test BUZ_USE_HIMEM even when CONFIG_BIGPHYS_AREA is defined -extern int v4l_nbufs; -extern int v4l_bufsize; -extern int jpg_nbufs; -extern int jpg_bufsize; -extern int pass_through; - static int lock_norm; /* 0 = default 1 = Don't change TV standard (norm) */ module_param(lock_norm, int, 0644); MODULE_PARM_DESC(lock_norm, "Prevent norm changes (1 = ignore, >1 = fail)"); -- cgit v0.10.2 From 0be01004ddc0694d8c592fff05ab88dabd45f476 Mon Sep 17 00:00:00 2001 From: Jean-Francois Moine Date: Thu, 4 Sep 2008 07:01:50 -0300 Subject: V4L/DVB (8910): gspca: Add support of image transfer by bulk and minor change. - image transfer by bulk - set the max number of transfer URS's to 4 (was 16) Signed-off-by: Jean-Francois Moine Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/gspca/gspca.c b/drivers/media/video/gspca/gspca.c index ac95c55..496d58d 100644 --- a/drivers/media/video/gspca/gspca.c +++ b/drivers/media/video/gspca/gspca.c @@ -178,6 +178,48 @@ static void isoc_irq(struct urb *urb } /* + * bulk message interrupt from the USB device + */ +static void bulk_irq(struct urb *urb +) +{ + struct gspca_dev *gspca_dev = (struct gspca_dev *) urb->context; + struct gspca_frame *frame; + int j, ret; + + PDEBUG(D_PACK, "bulk irq"); + if (!gspca_dev->streaming) + return; + if (urb->status != 0 && urb->status != -ECONNRESET) { +#ifdef CONFIG_PM + if (!gspca_dev->frozen) +#endif + PDEBUG(D_ERR|D_PACK, "urb status: %d", urb->status); + return; /* disconnection ? */ + } + + /* check the availability of the frame buffer */ + j = gspca_dev->fr_i; + j = gspca_dev->fr_queue[j]; + frame = &gspca_dev->frame[j]; + if ((frame->v4l2_buf.flags & BUF_ALL_FLAGS) + != V4L2_BUF_FLAG_QUEUED) { + gspca_dev->last_packet_type = DISCARD_PACKET; + } else { + PDEBUG(D_PACK, "packet l:%d", urb->actual_length); + gspca_dev->sd_desc->pkt_scan(gspca_dev, + frame, + urb->transfer_buffer, + urb->actual_length); + } + /* resubmit the URB */ + urb->status = 0; + ret = usb_submit_urb(urb, GFP_ATOMIC); + if (ret < 0) + PDEBUG(D_ERR|D_PACK, "usb_submit_urb() ret %d", ret); +} + +/* * add data to the current frame * * This function is called by the subdrivers at interrupt level. @@ -374,10 +416,11 @@ static void destroy_urbs(struct gspca_dev *gspca_dev) } /* - * search an input isochronous endpoint in an alternate setting + * search an input transfer endpoint in an alternate setting */ -static struct usb_host_endpoint *alt_isoc(struct usb_host_interface *alt, - __u8 epaddr) +static struct usb_host_endpoint *alt_xfer(struct usb_host_interface *alt, + __u8 epaddr, + __u8 xfer) { struct usb_host_endpoint *ep; int i, attr; @@ -388,7 +431,7 @@ static struct usb_host_endpoint *alt_isoc(struct usb_host_interface *alt, if (ep->desc.bEndpointAddress == epaddr) { attr = ep->desc.bmAttributes & USB_ENDPOINT_XFERTYPE_MASK; - if (attr == USB_ENDPOINT_XFER_ISOC) + if (attr == xfer) return ep; break; } @@ -397,14 +440,14 @@ static struct usb_host_endpoint *alt_isoc(struct usb_host_interface *alt, } /* - * search an input isochronous endpoint + * search an input (isoc or bulk) endpoint * * The endpoint is defined by the subdriver. * Use only the first isoc (some Zoran - 0x0572:0x0001 - have two such ep). * This routine may be called many times when the bandwidth is too small * (the bandwidth is checked on urb submit). */ -static struct usb_host_endpoint *get_isoc_ep(struct gspca_dev *gspca_dev) +static struct usb_host_endpoint *get_ep(struct gspca_dev *gspca_dev) { struct usb_interface *intf; struct usb_host_endpoint *ep; @@ -414,15 +457,19 @@ static struct usb_host_endpoint *get_isoc_ep(struct gspca_dev *gspca_dev) ep = NULL; i = gspca_dev->alt; /* previous alt setting */ while (--i > 0) { /* alt 0 is unusable */ - ep = alt_isoc(&intf->altsetting[i], gspca_dev->cam.epaddr); + ep = alt_xfer(&intf->altsetting[i], + gspca_dev->cam.epaddr, + gspca_dev->bulk + ? USB_ENDPOINT_XFER_BULK + : USB_ENDPOINT_XFER_ISOC); if (ep) break; } if (ep == NULL) { - err("no ISOC endpoint found"); + err("no transfer endpoint found"); return NULL; } - PDEBUG(D_STREAM, "use ISOC alt %d ep 0x%02x", + PDEBUG(D_STREAM, "use alt %d ep 0x%02x", i, ep->desc.bEndpointAddress); ret = usb_set_interface(gspca_dev->dev, gspca_dev->iface, i); if (ret < 0) { @@ -434,7 +481,7 @@ static struct usb_host_endpoint *get_isoc_ep(struct gspca_dev *gspca_dev) } /* - * create the isochronous URBs + * create the URBs for image transfer */ static int create_urbs(struct gspca_dev *gspca_dev, struct usb_host_endpoint *ep) @@ -447,12 +494,20 @@ static int create_urbs(struct gspca_dev *gspca_dev, /* See paragraph 5.9 / table 5-11 of the usb 2.0 spec. */ psize = (psize & 0x07ff) * (1 + ((psize >> 11) & 3)); - npkt = ISO_MAX_SIZE / psize; - if (npkt > ISO_MAX_PKT) - npkt = ISO_MAX_PKT; - bsize = psize * npkt; - PDEBUG(D_STREAM, - "isoc %d pkts size %d (bsize:%d)", npkt, psize, bsize); + if (!gspca_dev->bulk) { + npkt = ISO_MAX_SIZE / psize; + if (npkt > ISO_MAX_PKT) + npkt = ISO_MAX_PKT; + bsize = psize * npkt; + PDEBUG(D_STREAM, + "isoc %d pkts size %d = bsize:%d", + npkt, psize, bsize); + } else { + npkt = 0; + bsize = psize; + PDEBUG(D_STREAM, "bulk bsize:%d", bsize); + } + nurbs = DEF_NURBS; gspca_dev->nurbs = nurbs; for (n = 0; n < nurbs; n++) { @@ -476,17 +531,23 @@ static int create_urbs(struct gspca_dev *gspca_dev, gspca_dev->urb[n] = urb; urb->dev = gspca_dev->dev; urb->context = gspca_dev; - urb->pipe = usb_rcvisocpipe(gspca_dev->dev, - ep->desc.bEndpointAddress); - urb->transfer_flags = URB_ISO_ASAP - | URB_NO_TRANSFER_DMA_MAP; - urb->interval = ep->desc.bInterval; - urb->complete = isoc_irq; - urb->number_of_packets = npkt; urb->transfer_buffer_length = bsize; - for (i = 0; i < npkt; i++) { - urb->iso_frame_desc[i].length = psize; - urb->iso_frame_desc[i].offset = psize * i; + if (npkt != 0) { /* ISOC */ + urb->pipe = usb_rcvisocpipe(gspca_dev->dev, + ep->desc.bEndpointAddress); + urb->transfer_flags = URB_ISO_ASAP + | URB_NO_TRANSFER_DMA_MAP; + urb->interval = ep->desc.bInterval; + urb->complete = isoc_irq; + urb->number_of_packets = npkt; + for (i = 0; i < npkt; i++) { + urb->iso_frame_desc[i].length = psize; + urb->iso_frame_desc[i].offset = psize * i; + } + } else { /* bulk */ + urb->pipe = usb_rcvbulkpipe(gspca_dev->dev, + ep->desc.bEndpointAddress), + urb->complete = bulk_irq; } } return 0; @@ -508,7 +569,7 @@ static int gspca_init_transfer(struct gspca_dev *gspca_dev) gspca_dev->alt = gspca_dev->nbalt; for (;;) { PDEBUG(D_STREAM, "init transfer alt %d", gspca_dev->alt); - ep = get_isoc_ep(gspca_dev); + ep = get_ep(gspca_dev); if (ep == NULL) { ret = -EIO; goto out; diff --git a/drivers/media/video/gspca/gspca.h b/drivers/media/video/gspca/gspca.h index c17625c..78a35a8 100644 --- a/drivers/media/video/gspca/gspca.h +++ b/drivers/media/video/gspca/gspca.h @@ -49,8 +49,8 @@ extern int gspca_debug; } while (0) #define GSPCA_MAX_FRAMES 16 /* maximum number of video frame buffers */ -/* ISOC transfers */ -#define MAX_NURBS 16 /* max number of URBs */ +/* image transfers */ +#define MAX_NURBS 4 /* max number of URBs */ #define ISO_MAX_PKT 32 /* max number of packets in an ISOC transfer */ #define ISO_MAX_SIZE 0x8000 /* max size of one URB buffer (32 Kb) */ @@ -143,6 +143,7 @@ struct gspca_dev { __u8 iface; /* USB interface number */ __u8 alt; /* USB alternate setting */ + __u8 bulk; /* image transfer by isoc (0) or bulk (1) */ __u8 curr_mode; /* current camera mode */ __u32 pixfmt; /* current mode parameters */ __u16 width; -- cgit v0.10.2 From 4519064c1c7ccdd319d26181bdd12ee2df6e336e Mon Sep 17 00:00:00 2001 From: Andy Walls Date: Fri, 29 Aug 2008 16:10:21 -0300 Subject: V4L/DVB (8912): cx18: Correct CX23418 PCI configuration settings. cx18: Correct CX23418 PCI configuration settings. The CX23418 doesn't have I/O space registers, so there was no need to try and turn them on (the card ignores the attempt to set the bit anyway). Also removed incorrect config space register setting that was errantly borrowed from ivtv. Signed-off-by: Andy Walls Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/cx18/cx18-driver.c b/drivers/media/video/cx18/cx18-driver.c index 3419de9..3dfceb3 100644 --- a/drivers/media/video/cx18/cx18-driver.c +++ b/drivers/media/video/cx18/cx18-driver.c @@ -511,9 +511,9 @@ static int cx18_setup_pci(struct cx18 *cx, struct pci_dev *dev, return -EIO; } - /* Check for bus mastering */ + /* Enable bus mastering and memory mapped IO for the CX23418 */ pci_read_config_word(dev, PCI_COMMAND, &cmd); - cmd |= PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER; + cmd |= PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER; pci_write_config_word(dev, PCI_COMMAND, cmd); pci_read_config_byte(dev, PCI_CLASS_REVISION, &cx->card_rev); @@ -525,11 +525,6 @@ static int cx18_setup_pci(struct cx18 *cx, struct pci_dev *dev, pci_write_config_byte(dev, PCI_LATENCY_TIMER, 64); pci_read_config_byte(dev, PCI_LATENCY_TIMER, &pci_latency); } - /* This config space value relates to DMA latencies. The - default value 0x8080 is too low however and will lead - to DMA errors. 0xffff is the max value which solves - these problems. */ - pci_write_config_dword(dev, 0x40, 0xffff); CX18_DEBUG_INFO("cx%d (rev %d) at %02x:%02x.%x, " "irq: %d, latency: %d, memory: 0x%lx\n", -- cgit v0.10.2 From b1526421eac9a912b2cda7e147f1da2aa31be278 Mon Sep 17 00:00:00 2001 From: Andy Walls Date: Sat, 30 Aug 2008 16:03:44 -0300 Subject: V4L/DVB (8913): cx18: Create cx18_ specific wrappers for all pci mmio accessesors. cx18: Create cx18_ specific wrappers for all pci mmio accessesors. This is a first step in instrumenting all CX23418 PCI bus IO, to debug problems with accessing the CX23418's PCI memory mapped IO. Signed-off-by: Andy Walls Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/cx18/Makefile b/drivers/media/video/cx18/Makefile index b23d2e2..f7bf0ed 100644 --- a/drivers/media/video/cx18/Makefile +++ b/drivers/media/video/cx18/Makefile @@ -2,7 +2,7 @@ cx18-objs := cx18-driver.o cx18-cards.o cx18-i2c.o cx18-firmware.o cx18-gpio. cx18-queue.o cx18-streams.o cx18-fileops.o cx18-ioctl.o cx18-controls.o \ cx18-mailbox.o cx18-vbi.o cx18-audio.o cx18-video.o cx18-irq.o \ cx18-av-core.o cx18-av-audio.o cx18-av-firmware.o cx18-av-vbi.o cx18-scb.o \ - cx18-dvb.o + cx18-dvb.o cx18-io.o obj-$(CONFIG_VIDEO_CX18) += cx18.o diff --git a/drivers/media/video/cx18/cx18-audio.c b/drivers/media/video/cx18/cx18-audio.c index 6d5b94f..57beddf 100644 --- a/drivers/media/video/cx18/cx18-audio.c +++ b/drivers/media/video/cx18/cx18-audio.c @@ -22,6 +22,7 @@ */ #include "cx18-driver.h" +#include "cx18-io.h" #include "cx18-i2c.h" #include "cx18-cards.h" #include "cx18-audio.h" @@ -60,10 +61,10 @@ int cx18_audio_set_io(struct cx18 *cx) if (err) return err; - val = read_reg(CX18_AUDIO_ENABLE) & ~0x30; + val = cx18_read_reg(cx, CX18_AUDIO_ENABLE) & ~0x30; val |= (audio_input > CX18_AV_AUDIO_SERIAL2) ? 0x20 : (audio_input << 4); - write_reg(val | 0xb00, CX18_AUDIO_ENABLE); + cx18_write_reg(cx, val | 0xb00, CX18_AUDIO_ENABLE); cx18_vapi(cx, CX18_APU_RESETAI, 1, 0); return 0; } diff --git a/drivers/media/video/cx18/cx18-av-core.c b/drivers/media/video/cx18/cx18-av-core.c index 3b0a2c4..d8626e3 100644 --- a/drivers/media/video/cx18/cx18-av-core.c +++ b/drivers/media/video/cx18/cx18-av-core.c @@ -22,27 +22,29 @@ */ #include "cx18-driver.h" +#include "cx18-io.h" int cx18_av_write(struct cx18 *cx, u16 addr, u8 value) { - u32 x = readl(cx->reg_mem + 0xc40000 + (addr & ~3)); + u32 reg = 0xc40000 + (addr & ~3); u32 mask = 0xff; int shift = (addr & 3) * 8; + u32 x = cx18_read_reg(cx, reg); x = (x & ~(mask << shift)) | ((u32)value << shift); - writel(x, cx->reg_mem + 0xc40000 + (addr & ~3)); + cx18_write_reg(cx, x, reg); return 0; } int cx18_av_write4(struct cx18 *cx, u16 addr, u32 value) { - writel(value, cx->reg_mem + 0xc40000 + addr); + cx18_write_reg(cx, value, 0xc40000 + addr); return 0; } u8 cx18_av_read(struct cx18 *cx, u16 addr) { - u32 x = readl(cx->reg_mem + 0xc40000 + (addr & ~3)); + u32 x = cx18_read_reg(cx, 0xc40000 + (addr & ~3)); int shift = (addr & 3) * 8; return (x >> shift) & 0xff; @@ -50,7 +52,7 @@ u8 cx18_av_read(struct cx18 *cx, u16 addr) u32 cx18_av_read4(struct cx18 *cx, u16 addr) { - return readl(cx->reg_mem + 0xc40000 + addr); + return cx18_read_reg(cx, 0xc40000 + addr); } int cx18_av_and_or(struct cx18 *cx, u16 addr, unsigned and_mask, diff --git a/drivers/media/video/cx18/cx18-av-firmware.c b/drivers/media/video/cx18/cx18-av-firmware.c index e996a4e..0488b62 100644 --- a/drivers/media/video/cx18/cx18-av-firmware.c +++ b/drivers/media/video/cx18/cx18-av-firmware.c @@ -20,6 +20,7 @@ */ #include "cx18-driver.h" +#include "cx18-io.h" #include #define CX18_AUDIO_ENABLE 0xc72014 @@ -119,10 +120,10 @@ int cx18_av_loadfw(struct cx18 *cx) have a name in the spec. */ cx18_av_write4(cx, 0x09CC, 1); - v = read_reg(CX18_AUDIO_ENABLE); - /* If bit 11 is 1 */ + v = cx18_read_reg(cx, CX18_AUDIO_ENABLE); + /* If bit 11 is 1, clear bit 10 */ if (v & 0x800) - write_reg(v & 0xFFFFFBFF, CX18_AUDIO_ENABLE); /* Clear bit 10 */ + cx18_write_reg(cx, v & 0xFFFFFBFF, CX18_AUDIO_ENABLE); /* Enable WW auto audio standard detection */ v = cx18_av_read4(cx, CXADEC_STD_DET_CTL); diff --git a/drivers/media/video/cx18/cx18-driver.c b/drivers/media/video/cx18/cx18-driver.c index 3dfceb3..d31e1ec 100644 --- a/drivers/media/video/cx18/cx18-driver.c +++ b/drivers/media/video/cx18/cx18-driver.c @@ -22,6 +22,7 @@ */ #include "cx18-driver.h" +#include "cx18-io.h" #include "cx18-version.h" #include "cx18-cards.h" #include "cx18-i2c.h" @@ -651,7 +652,7 @@ static int __devinit cx18_probe(struct pci_dev *dev, goto free_mem; } cx->reg_mem = cx->enc_mem + CX18_REG_OFFSET; - devtype = read_reg(0xC72028); + devtype = cx18_read_reg(cx, 0xC72028); switch (devtype & 0xff000000) { case 0xff000000: CX18_INFO("cx23418 revision %08x (A)\n", devtype); @@ -897,8 +898,8 @@ static void cx18_remove(struct pci_dev *pci_dev) cx18_stop_all_captures(cx); /* Interrupts */ - sw1_irq_disable(IRQ_CPU_TO_EPU | IRQ_APU_TO_EPU); - sw2_irq_disable(IRQ_CPU_TO_EPU_ACK | IRQ_APU_TO_EPU_ACK); + cx18_sw1_irq_disable(cx, IRQ_CPU_TO_EPU | IRQ_APU_TO_EPU); + cx18_sw2_irq_disable(cx, IRQ_CPU_TO_EPU_ACK | IRQ_APU_TO_EPU_ACK); cx18_halt_firmware(cx); diff --git a/drivers/media/video/cx18/cx18-driver.h b/drivers/media/video/cx18/cx18-driver.h index 7bdd2fc..2cfdbe4 100644 --- a/drivers/media/video/cx18/cx18-driver.h +++ b/drivers/media/video/cx18/cx18-driver.h @@ -457,47 +457,4 @@ void cx18_read_eeprom(struct cx18 *cx, struct tveeprom *tv); /* First-open initialization: load firmware, etc. */ int cx18_init_on_first_open(struct cx18 *cx); -/* This is a PCI post thing, where if the pci register is not read, then - the write doesn't always take effect right away. By reading back the - register any pending PCI writes will be performed (in order), and so - you can be sure that the writes are guaranteed to be done. - - Rarely needed, only in some timing sensitive cases. - Apparently if this is not done some motherboards seem - to kill the firmware and get into the broken state until computer is - rebooted. */ -#define write_sync(val, reg) \ - do { writel(val, reg); readl(reg); } while (0) - -#define read_reg(reg) readl(cx->reg_mem + (reg)) -#define write_reg(val, reg) writel(val, cx->reg_mem + (reg)) -#define write_reg_sync(val, reg) \ - do { write_reg(val, reg); read_reg(reg); } while (0) - -#define read_enc(addr) readl(cx->enc_mem + (u32)(addr)) -#define write_enc(val, addr) writel(val, cx->enc_mem + (u32)(addr)) -#define write_enc_sync(val, addr) \ - do { write_enc(val, addr); read_enc(addr); } while (0) - -#define sw1_irq_enable(val) do { \ - write_reg(val, SW1_INT_STATUS); \ - write_reg(read_reg(SW1_INT_ENABLE_PCI) | (val), SW1_INT_ENABLE_PCI); \ -} while (0) - -#define sw1_irq_disable(val) \ - write_reg(read_reg(SW1_INT_ENABLE_PCI) & ~(val), SW1_INT_ENABLE_PCI); - -#define sw2_irq_enable(val) do { \ - write_reg(val, SW2_INT_STATUS); \ - write_reg(read_reg(SW2_INT_ENABLE_PCI) | (val), SW2_INT_ENABLE_PCI); \ -} while (0) - -#define sw2_irq_disable(val) \ - write_reg(read_reg(SW2_INT_ENABLE_PCI) & ~(val), SW2_INT_ENABLE_PCI); - -#define setup_page(addr) do { \ - u32 val = read_reg(0xD000F8) & ~0x1f00; \ - write_reg(val | (((addr) >> 17) & 0x1f00), 0xD000F8); \ -} while (0) - #endif /* CX18_DRIVER_H */ diff --git a/drivers/media/video/cx18/cx18-dvb.c b/drivers/media/video/cx18/cx18-dvb.c index 1e420a8..afc694e 100644 --- a/drivers/media/video/cx18/cx18-dvb.c +++ b/drivers/media/video/cx18/cx18-dvb.c @@ -21,6 +21,7 @@ #include "cx18-version.h" #include "cx18-dvb.h" +#include "cx18-io.h" #include "cx18-streams.h" #include "cx18-cards.h" #include "s5h1409.h" @@ -87,13 +88,13 @@ static int cx18_dvb_start_feed(struct dvb_demux_feed *feed) switch (cx->card->type) { case CX18_CARD_HVR_1600_ESMT: case CX18_CARD_HVR_1600_SAMSUNG: - v = read_reg(CX18_REG_DMUX_NUM_PORT_0_CONTROL); + v = cx18_read_reg(cx, CX18_REG_DMUX_NUM_PORT_0_CONTROL); v |= 0x00400000; /* Serial Mode */ v |= 0x00002000; /* Data Length - Byte */ v |= 0x00010000; /* Error - Polarity */ v |= 0x00020000; /* Error - Passthru */ v |= 0x000c0000; /* Error - Ignore */ - write_reg(v, CX18_REG_DMUX_NUM_PORT_0_CONTROL); + cx18_write_reg(cx, v, CX18_REG_DMUX_NUM_PORT_0_CONTROL); break; default: diff --git a/drivers/media/video/cx18/cx18-firmware.c b/drivers/media/video/cx18/cx18-firmware.c index 78fadd2..5153442 100644 --- a/drivers/media/video/cx18/cx18-firmware.c +++ b/drivers/media/video/cx18/cx18-firmware.c @@ -20,6 +20,7 @@ */ #include "cx18-driver.h" +#include "cx18-io.h" #include "cx18-scb.h" #include "cx18-irq.h" #include "cx18-firmware.h" @@ -113,11 +114,11 @@ static int load_cpu_fw_direct(const char *fn, u8 __iomem *mem, struct cx18 *cx) src = (const u32 *)fw->data; for (i = 0; i < fw->size; i += 4096) { - setup_page(i); + cx18_setup_page(cx, i); for (j = i; j < fw->size && j < i + 4096; j += 4) { /* no need for endianness conversion on the ppc */ - __raw_writel(*src, dst); - if (__raw_readl(dst) != *src) { + cx18_raw_writel(cx, *src, dst); + if (cx18_raw_readl(cx, dst) != *src) { CX18_ERR("Mismatch at offset %x\n", i); release_firmware(fw); return -EIO; @@ -170,12 +171,15 @@ static int load_apu_fw_direct(const char *fn, u8 __iomem *dst, struct cx18 *cx) if (offset + seghdr.size > sz) break; for (i = 0; i < seghdr.size; i += 4096) { - setup_page(offset + i); + cx18_setup_page(cx, offset + i); for (j = i; j < seghdr.size && j < i + 4096; j += 4) { /* no need for endianness conversion on the ppc */ - __raw_writel(src[(offset + j) / 4], dst + seghdr.addr + j); - if (__raw_readl(dst + seghdr.addr + j) != src[(offset + j) / 4]) { - CX18_ERR("Mismatch at offset %x\n", offset + j); + cx18_raw_writel(cx, src[(offset + j) / 4], + dst + seghdr.addr + j); + if (cx18_raw_readl(cx, dst + seghdr.addr + j) + != src[(offset + j) / 4]) { + CX18_ERR("Mismatch at offset %x\n", + offset + j); release_firmware(fw); return -EIO; } @@ -189,43 +193,45 @@ static int load_apu_fw_direct(const char *fn, u8 __iomem *dst, struct cx18 *cx) size = fw->size; release_firmware(fw); /* Clear bit0 for APU to start from 0 */ - write_reg(read_reg(0xc72030) & ~1, 0xc72030); + cx18_write_reg(cx, cx18_read_reg(cx, 0xc72030) & ~1, 0xc72030); return size; } void cx18_halt_firmware(struct cx18 *cx) { CX18_DEBUG_INFO("Preparing for firmware halt.\n"); - write_reg(0x000F000F, CX18_PROC_SOFT_RESET); /* stop the fw */ - write_reg(0x00020002, CX18_ADEC_CONTROL); + cx18_write_reg(cx, 0x000F000F, CX18_PROC_SOFT_RESET); /* stop the fw */ + cx18_write_reg(cx, 0x00020002, CX18_ADEC_CONTROL); } void cx18_init_power(struct cx18 *cx, int lowpwr) { /* power-down Spare and AOM PLLs */ /* power-up fast, slow and mpeg PLLs */ - write_reg(0x00000008, CX18_PLL_POWER_DOWN); + cx18_write_reg(cx, 0x00000008, CX18_PLL_POWER_DOWN); /* ADEC out of sleep */ - write_reg(0x00020000, CX18_ADEC_CONTROL); + cx18_write_reg(cx, 0x00020000, CX18_ADEC_CONTROL); /* The fast clock is at 200/245 MHz */ - write_reg(lowpwr ? 0xD : 0x11, CX18_FAST_CLOCK_PLL_INT); - write_reg(lowpwr ? 0x1EFBF37 : 0x038E3D7, CX18_FAST_CLOCK_PLL_FRAC); + cx18_write_reg(cx, lowpwr ? 0xD : 0x11, CX18_FAST_CLOCK_PLL_INT); + cx18_write_reg(cx, lowpwr ? 0x1EFBF37 : 0x038E3D7, + CX18_FAST_CLOCK_PLL_FRAC); - write_reg(2, CX18_FAST_CLOCK_PLL_POST); - write_reg(1, CX18_FAST_CLOCK_PLL_PRESCALE); - write_reg(4, CX18_FAST_CLOCK_PLL_ADJUST_BANDWIDTH); + cx18_write_reg(cx, 2, CX18_FAST_CLOCK_PLL_POST); + cx18_write_reg(cx, 1, CX18_FAST_CLOCK_PLL_PRESCALE); + cx18_write_reg(cx, 4, CX18_FAST_CLOCK_PLL_ADJUST_BANDWIDTH); /* set slow clock to 125/120 MHz */ - write_reg(lowpwr ? 0x11 : 0x10, CX18_SLOW_CLOCK_PLL_INT); - write_reg(lowpwr ? 0xEBAF05 : 0x18618A8, CX18_SLOW_CLOCK_PLL_FRAC); - write_reg(4, CX18_SLOW_CLOCK_PLL_POST); + cx18_write_reg(cx, lowpwr ? 0x11 : 0x10, CX18_SLOW_CLOCK_PLL_INT); + cx18_write_reg(cx, lowpwr ? 0xEBAF05 : 0x18618A8, + CX18_SLOW_CLOCK_PLL_FRAC); + cx18_write_reg(cx, 4, CX18_SLOW_CLOCK_PLL_POST); /* mpeg clock pll 54MHz */ - write_reg(0xF, CX18_MPEG_CLOCK_PLL_INT); - write_reg(0x2BCFEF, CX18_MPEG_CLOCK_PLL_FRAC); - write_reg(8, CX18_MPEG_CLOCK_PLL_POST); + cx18_write_reg(cx, 0xF, CX18_MPEG_CLOCK_PLL_INT); + cx18_write_reg(cx, 0x2BCFEF, CX18_MPEG_CLOCK_PLL_FRAC); + cx18_write_reg(cx, 8, CX18_MPEG_CLOCK_PLL_POST); /* Defaults */ /* APU = SC or SC/2 = 125/62.5 */ @@ -242,81 +248,84 @@ void cx18_init_power(struct cx18 *cx, int lowpwr) /* VFC = disabled */ /* USB = disabled */ - write_reg(lowpwr ? 0xFFFF0020 : 0x00060004, CX18_CLOCK_SELECT1); - write_reg(lowpwr ? 0xFFFF0004 : 0x00060006, CX18_CLOCK_SELECT2); + cx18_write_reg(cx, lowpwr ? 0xFFFF0020 : 0x00060004, + CX18_CLOCK_SELECT1); + cx18_write_reg(cx, lowpwr ? 0xFFFF0004 : 0x00060006, + CX18_CLOCK_SELECT2); - write_reg(0xFFFF0002, CX18_HALF_CLOCK_SELECT1); - write_reg(0xFFFF0104, CX18_HALF_CLOCK_SELECT2); + cx18_write_reg(cx, 0xFFFF0002, CX18_HALF_CLOCK_SELECT1); + cx18_write_reg(cx, 0xFFFF0104, CX18_HALF_CLOCK_SELECT2); - write_reg(0xFFFF9026, CX18_CLOCK_ENABLE1); - write_reg(0xFFFF3105, CX18_CLOCK_ENABLE2); + cx18_write_reg(cx, 0xFFFF9026, CX18_CLOCK_ENABLE1); + cx18_write_reg(cx, 0xFFFF3105, CX18_CLOCK_ENABLE2); } void cx18_init_memory(struct cx18 *cx) { cx18_msleep_timeout(10, 0); - write_reg(0x10000, CX18_DDR_SOFT_RESET); + cx18_write_reg(cx, 0x10000, CX18_DDR_SOFT_RESET); cx18_msleep_timeout(10, 0); - write_reg(cx->card->ddr.chip_config, CX18_DDR_CHIP_CONFIG); + cx18_write_reg(cx, cx->card->ddr.chip_config, CX18_DDR_CHIP_CONFIG); cx18_msleep_timeout(10, 0); - write_reg(cx->card->ddr.refresh, CX18_DDR_REFRESH); - write_reg(cx->card->ddr.timing1, CX18_DDR_TIMING1); - write_reg(cx->card->ddr.timing2, CX18_DDR_TIMING2); + cx18_write_reg(cx, cx->card->ddr.refresh, CX18_DDR_REFRESH); + cx18_write_reg(cx, cx->card->ddr.timing1, CX18_DDR_TIMING1); + cx18_write_reg(cx, cx->card->ddr.timing2, CX18_DDR_TIMING2); cx18_msleep_timeout(10, 0); /* Initialize DQS pad time */ - write_reg(cx->card->ddr.tune_lane, CX18_DDR_TUNE_LANE); - write_reg(cx->card->ddr.initial_emrs, CX18_DDR_INITIAL_EMRS); + cx18_write_reg(cx, cx->card->ddr.tune_lane, CX18_DDR_TUNE_LANE); + cx18_write_reg(cx, cx->card->ddr.initial_emrs, CX18_DDR_INITIAL_EMRS); cx18_msleep_timeout(10, 0); - write_reg(0x20000, CX18_DDR_SOFT_RESET); + cx18_write_reg(cx, 0x20000, CX18_DDR_SOFT_RESET); cx18_msleep_timeout(10, 0); /* use power-down mode when idle */ - write_reg(0x00000010, CX18_DDR_POWER_REG); - - write_reg(0x10001, CX18_REG_BUS_TIMEOUT_EN); - - write_reg(0x48, CX18_DDR_MB_PER_ROW_7); - write_reg(0xE0000, CX18_DDR_BASE_63_ADDR); - - write_reg(0x00000101, CX18_WMB_CLIENT02); /* AO */ - write_reg(0x00000101, CX18_WMB_CLIENT09); /* AI2 */ - write_reg(0x00000101, CX18_WMB_CLIENT05); /* VIM1 */ - write_reg(0x00000101, CX18_WMB_CLIENT06); /* AI1 */ - write_reg(0x00000101, CX18_WMB_CLIENT07); /* 3D comb */ - write_reg(0x00000101, CX18_WMB_CLIENT10); /* ME */ - write_reg(0x00000101, CX18_WMB_CLIENT12); /* ENC */ - write_reg(0x00000101, CX18_WMB_CLIENT13); /* PK */ - write_reg(0x00000101, CX18_WMB_CLIENT11); /* RC */ - write_reg(0x00000101, CX18_WMB_CLIENT14); /* AVO */ + cx18_write_reg(cx, 0x00000010, CX18_DDR_POWER_REG); + + cx18_write_reg(cx, 0x10001, CX18_REG_BUS_TIMEOUT_EN); + + cx18_write_reg(cx, 0x48, CX18_DDR_MB_PER_ROW_7); + cx18_write_reg(cx, 0xE0000, CX18_DDR_BASE_63_ADDR); + + cx18_write_reg(cx, 0x00000101, CX18_WMB_CLIENT02); /* AO */ + cx18_write_reg(cx, 0x00000101, CX18_WMB_CLIENT09); /* AI2 */ + cx18_write_reg(cx, 0x00000101, CX18_WMB_CLIENT05); /* VIM1 */ + cx18_write_reg(cx, 0x00000101, CX18_WMB_CLIENT06); /* AI1 */ + cx18_write_reg(cx, 0x00000101, CX18_WMB_CLIENT07); /* 3D comb */ + cx18_write_reg(cx, 0x00000101, CX18_WMB_CLIENT10); /* ME */ + cx18_write_reg(cx, 0x00000101, CX18_WMB_CLIENT12); /* ENC */ + cx18_write_reg(cx, 0x00000101, CX18_WMB_CLIENT13); /* PK */ + cx18_write_reg(cx, 0x00000101, CX18_WMB_CLIENT11); /* RC */ + cx18_write_reg(cx, 0x00000101, CX18_WMB_CLIENT14); /* AVO */ } int cx18_firmware_init(struct cx18 *cx) { /* Allow chip to control CLKRUN */ - write_reg(0x5, CX18_DSP0_INTERRUPT_MASK); + cx18_write_reg(cx, 0x5, CX18_DSP0_INTERRUPT_MASK); - write_reg(0x000F000F, CX18_PROC_SOFT_RESET); /* stop the fw */ + cx18_write_reg(cx, 0x000F000F, CX18_PROC_SOFT_RESET); /* stop the fw */ cx18_msleep_timeout(1, 0); - sw1_irq_enable(IRQ_CPU_TO_EPU | IRQ_APU_TO_EPU); - sw2_irq_enable(IRQ_CPU_TO_EPU_ACK | IRQ_APU_TO_EPU_ACK); + cx18_sw1_irq_enable(cx, IRQ_CPU_TO_EPU | IRQ_APU_TO_EPU); + cx18_sw2_irq_enable(cx, IRQ_CPU_TO_EPU_ACK | IRQ_APU_TO_EPU_ACK); /* Only if the processor is not running */ - if (read_reg(CX18_PROC_SOFT_RESET) & 8) { + if (cx18_read_reg(cx, CX18_PROC_SOFT_RESET) & 8) { int sz = load_apu_fw_direct("v4l-cx23418-apu.fw", cx->enc_mem, cx); - write_enc(0xE51FF004, 0); - write_enc(0xa00000, 4); /* todo: not hardcoded */ - write_reg(0x00010000, CX18_PROC_SOFT_RESET); /* Start APU */ + cx18_write_enc(cx, 0xE51FF004, 0); + cx18_write_enc(cx, 0xa00000, 4); /* todo: not hardcoded */ + /* Start APU */ + cx18_write_reg(cx, 0x00010000, CX18_PROC_SOFT_RESET); cx18_msleep_timeout(500, 0); sz = sz <= 0 ? sz : load_cpu_fw_direct("v4l-cx23418-cpu.fw", @@ -326,9 +335,10 @@ int cx18_firmware_init(struct cx18 *cx) int retries = 0; /* start the CPU */ - write_reg(0x00080000, CX18_PROC_SOFT_RESET); + cx18_write_reg(cx, 0x00080000, CX18_PROC_SOFT_RESET); while (retries++ < 50) { /* Loop for max 500mS */ - if ((read_reg(CX18_PROC_SOFT_RESET) & 1) == 0) + if ((cx18_read_reg(cx, CX18_PROC_SOFT_RESET) + & 1) == 0) break; cx18_msleep_timeout(10, 0); } @@ -342,6 +352,6 @@ int cx18_firmware_init(struct cx18 *cx) return -EIO; } /* initialize GPIO */ - write_reg(0x14001400, 0xC78110); + cx18_write_reg(cx, 0x14001400, 0xC78110); return 0; } diff --git a/drivers/media/video/cx18/cx18-gpio.c b/drivers/media/video/cx18/cx18-gpio.c index 3d495db..3bdffbf 100644 --- a/drivers/media/video/cx18/cx18-gpio.c +++ b/drivers/media/video/cx18/cx18-gpio.c @@ -22,6 +22,7 @@ */ #include "cx18-driver.h" +#include "cx18-io.h" #include "cx18-cards.h" #include "cx18-gpio.h" #include "tuner-xc2028.h" @@ -49,11 +50,11 @@ static void gpio_write(struct cx18 *cx) u32 dir = cx->gpio_dir; u32 val = cx->gpio_val; - write_reg((dir & 0xffff) << 16, CX18_REG_GPIO_DIR1); - write_reg(((dir & 0xffff) << 16) | (val & 0xffff), + cx18_write_reg(cx, (dir & 0xffff) << 16, CX18_REG_GPIO_DIR1); + cx18_write_reg(cx, ((dir & 0xffff) << 16) | (val & 0xffff), CX18_REG_GPIO_OUT1); - write_reg(dir & 0xffff0000, CX18_REG_GPIO_DIR2); - write_reg_sync((dir & 0xffff0000) | ((val & 0xffff0000) >> 16), + cx18_write_reg(cx, dir & 0xffff0000, CX18_REG_GPIO_DIR2); + cx18_write_reg_sync(cx, (dir & 0xffff0000) | ((val & 0xffff0000) >> 16), CX18_REG_GPIO_OUT2); } @@ -141,8 +142,10 @@ void cx18_gpio_init(struct cx18 *cx) } CX18_DEBUG_INFO("GPIO initial dir: %08x/%08x out: %08x/%08x\n", - read_reg(CX18_REG_GPIO_DIR1), read_reg(CX18_REG_GPIO_DIR2), - read_reg(CX18_REG_GPIO_OUT1), read_reg(CX18_REG_GPIO_OUT2)); + cx18_read_reg(cx, CX18_REG_GPIO_DIR1), + cx18_read_reg(cx, CX18_REG_GPIO_DIR2), + cx18_read_reg(cx, CX18_REG_GPIO_OUT1), + cx18_read_reg(cx, CX18_REG_GPIO_OUT2)); gpio_write(cx); mutex_unlock(&cx->gpio_lock); diff --git a/drivers/media/video/cx18/cx18-i2c.c b/drivers/media/video/cx18/cx18-i2c.c index 7d8fb25..aa09e55 100644 --- a/drivers/media/video/cx18/cx18-i2c.c +++ b/drivers/media/video/cx18/cx18-i2c.c @@ -22,6 +22,7 @@ */ #include "cx18-driver.h" +#include "cx18-io.h" #include "cx18-cards.h" #include "cx18-gpio.h" #include "cx18-av-core.h" @@ -156,12 +157,12 @@ static void cx18_setscl(void *data, int state) struct cx18 *cx = ((struct cx18_i2c_algo_callback_data *)data)->cx; int bus_index = ((struct cx18_i2c_algo_callback_data *)data)->bus_index; u32 addr = bus_index ? CX18_REG_I2C_2_WR : CX18_REG_I2C_1_WR; - u32 r = read_reg(addr); + u32 r = cx18_read_reg(cx, addr); if (state) - write_reg_sync(r | SETSCL_BIT, addr); + cx18_write_reg_sync(cx, r | SETSCL_BIT, addr); else - write_reg_sync(r & ~SETSCL_BIT, addr); + cx18_write_reg_sync(cx, r & ~SETSCL_BIT, addr); } static void cx18_setsda(void *data, int state) @@ -169,12 +170,12 @@ static void cx18_setsda(void *data, int state) struct cx18 *cx = ((struct cx18_i2c_algo_callback_data *)data)->cx; int bus_index = ((struct cx18_i2c_algo_callback_data *)data)->bus_index; u32 addr = bus_index ? CX18_REG_I2C_2_WR : CX18_REG_I2C_1_WR; - u32 r = read_reg(addr); + u32 r = cx18_read_reg(cx, addr); if (state) - write_reg_sync(r | SETSDL_BIT, addr); + cx18_write_reg_sync(cx, r | SETSDL_BIT, addr); else - write_reg_sync(r & ~SETSDL_BIT, addr); + cx18_write_reg_sync(cx, r & ~SETSDL_BIT, addr); } static int cx18_getscl(void *data) @@ -183,7 +184,7 @@ static int cx18_getscl(void *data) int bus_index = ((struct cx18_i2c_algo_callback_data *)data)->bus_index; u32 addr = bus_index ? CX18_REG_I2C_2_RD : CX18_REG_I2C_1_RD; - return read_reg(addr) & GETSCL_BIT; + return cx18_read_reg(cx, addr) & GETSCL_BIT; } static int cx18_getsda(void *data) @@ -192,7 +193,7 @@ static int cx18_getsda(void *data) int bus_index = ((struct cx18_i2c_algo_callback_data *)data)->bus_index; u32 addr = bus_index ? CX18_REG_I2C_2_RD : CX18_REG_I2C_1_RD; - return read_reg(addr) & GETSDL_BIT; + return cx18_read_reg(cx, addr) & GETSDL_BIT; } /* template for i2c-bit-algo */ @@ -392,29 +393,33 @@ int init_cx18_i2c(struct cx18 *cx) cx->i2c_adap[i].dev.parent = &cx->dev->dev; } - if (read_reg(CX18_REG_I2C_2_WR) != 0x0003c02f) { + if (cx18_read_reg(cx, CX18_REG_I2C_2_WR) != 0x0003c02f) { /* Reset/Unreset I2C hardware block */ - write_reg(0x10000000, 0xc71004); /* Clock select 220MHz */ - write_reg_sync(0x10001000, 0xc71024); /* Clock Enable */ + /* Clock select 220MHz */ + cx18_write_reg(cx, 0x10000000, 0xc71004); + /* Clock Enable */ + cx18_write_reg_sync(cx, 0x10001000, 0xc71024); } /* courtesy of Steven Toth */ - write_reg_sync(0x00c00000, 0xc7001c); + cx18_write_reg_sync(cx, 0x00c00000, 0xc7001c); mdelay(10); - write_reg_sync(0x00c000c0, 0xc7001c); + cx18_write_reg_sync(cx, 0x00c000c0, 0xc7001c); mdelay(10); - write_reg_sync(0x00c00000, 0xc7001c); + cx18_write_reg_sync(cx, 0x00c00000, 0xc7001c); mdelay(10); - write_reg_sync(0x00c00000, 0xc730c8); /* Set to edge-triggered intrs. */ - write_reg_sync(0x00c00000, 0xc730c4); /* Clear any stale intrs */ + /* Set to edge-triggered intrs. */ + cx18_write_reg_sync(cx, 0x00c00000, 0xc730c8); + /* Clear any stale intrs */ + cx18_write_reg_sync(cx, 0x00c00000, 0xc730c4); /* Hw I2C1 Clock Freq ~100kHz */ - write_reg_sync(0x00021c0f & ~4, CX18_REG_I2C_1_WR); + cx18_write_reg_sync(cx, 0x00021c0f & ~4, CX18_REG_I2C_1_WR); cx18_setscl(&cx->i2c_algo_cb_data[0], 1); cx18_setsda(&cx->i2c_algo_cb_data[0], 1); /* Hw I2C2 Clock Freq ~100kHz */ - write_reg_sync(0x00021c0f & ~4, CX18_REG_I2C_2_WR); + cx18_write_reg_sync(cx, 0x00021c0f & ~4, CX18_REG_I2C_2_WR); cx18_setscl(&cx->i2c_algo_cb_data[1], 1); cx18_setsda(&cx->i2c_algo_cb_data[1], 1); @@ -428,8 +433,10 @@ void exit_cx18_i2c(struct cx18 *cx) { int i; CX18_DEBUG_I2C("i2c exit\n"); - write_reg(read_reg(CX18_REG_I2C_1_WR) | 4, CX18_REG_I2C_1_WR); - write_reg(read_reg(CX18_REG_I2C_2_WR) | 4, CX18_REG_I2C_2_WR); + cx18_write_reg(cx, cx18_read_reg(cx, CX18_REG_I2C_1_WR) | 4, + CX18_REG_I2C_1_WR); + cx18_write_reg(cx, cx18_read_reg(cx, CX18_REG_I2C_2_WR) | 4, + CX18_REG_I2C_2_WR); for (i = 0; i < 2; i++) { i2c_del_adapter(&cx->i2c_adap[i]); diff --git a/drivers/media/video/cx18/cx18-io.c b/drivers/media/video/cx18/cx18-io.c new file mode 100644 index 0000000..c53d9b6 --- /dev/null +++ b/drivers/media/video/cx18/cx18-io.c @@ -0,0 +1,142 @@ +/* + * cx18 driver PCI memory mapped IO access routines + * + * Copyright (C) 2007 Hans Verkuil + * Copyright (C) 2008 Andy Walls + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA + * 02111-1307 USA + */ + +#include "cx18-driver.h" +#include "cx18-irq.h" + +void cx18_raw_writel(struct cx18 *cx, u32 val, void __iomem *addr) +{ + __raw_writel(val, addr); +} + +u32 cx18_raw_readl(struct cx18 *cx, const void __iomem *addr) +{ + return __raw_readl(addr); +} + +u32 cx18_write_sync(struct cx18 *cx, u32 val, void __iomem *addr) +{ + writel(val, addr); + return readl(addr); +} + +void cx18_writel(struct cx18 *cx, u32 val, void __iomem *addr) +{ + writel(val, addr); +} + +u32 cx18_readl(struct cx18 *cx, const void __iomem *addr) +{ + return readl(addr); +} + + +/* Access "register" region of CX23418 memory mapped I/O */ +u32 cx18_read_reg(struct cx18 *cx, u32 reg) +{ + return readl(cx->reg_mem + reg); +} + +void cx18_write_reg(struct cx18 *cx, u32 val, u32 reg) +{ + writel(val, cx->reg_mem + reg); +} + +u32 cx18_write_reg_sync(struct cx18 *cx, u32 val, u32 reg) +{ + return cx18_write_sync(cx, val, cx->reg_mem + reg); +} + +/* Access "encoder memory" region of CX23418 memory mapped I/O */ +u32 cx18_read_enc(struct cx18 *cx, u32 addr) +{ + return readl(cx->enc_mem + addr); +} + +void cx18_write_enc(struct cx18 *cx, u32 val, u32 addr) +{ + writel(val, cx->enc_mem + addr); +} + +u32 cx18_write_enc_sync(struct cx18 *cx, u32 val, u32 addr) +{ + return cx18_write_sync(cx, val, cx->enc_mem + addr); +} + +void cx18_memcpy_fromio(struct cx18 *cx, void *to, + const void __iomem *from, unsigned int len) +{ + memcpy_fromio(to, from, len); +} + +void cx18_memset_io(struct cx18 *cx, void __iomem *addr, int val, size_t count) +{ + memset_io(addr, val, count); +} + +void cx18_sw1_irq_enable(struct cx18 *cx, u32 val) +{ + u32 r; + cx18_write_reg(cx, val, SW1_INT_STATUS); + r = cx18_read_reg(cx, SW1_INT_ENABLE_PCI); + cx18_write_reg(cx, r | val, SW1_INT_ENABLE_PCI); +} + +void cx18_sw1_irq_disable(struct cx18 *cx, u32 val) +{ + u32 r; + r = cx18_read_reg(cx, SW1_INT_ENABLE_PCI); + cx18_write_reg(cx, r & ~val, SW1_INT_ENABLE_PCI); +} + +void cx18_sw2_irq_enable(struct cx18 *cx, u32 val) +{ + u32 r; + cx18_write_reg(cx, val, SW2_INT_STATUS); + r = cx18_read_reg(cx, SW2_INT_ENABLE_PCI); + cx18_write_reg(cx, r | val, SW2_INT_ENABLE_PCI); +} + +void cx18_sw2_irq_disable(struct cx18 *cx, u32 val) +{ + u32 r; + r = cx18_read_reg(cx, SW2_INT_ENABLE_PCI); + cx18_write_reg(cx, r & ~val, SW2_INT_ENABLE_PCI); +} + +void cx18_setup_page(struct cx18 *cx, u32 addr) +{ + u32 val; + val = cx18_read_reg(cx, 0xD000F8); + val = (val & ~0x1f00) | ((addr >> 17) & 0x1f00); + cx18_write_reg(cx, val, 0xD000F8); +} + +/* Tries to recover from the CX23418 responding improperly on the PCI bus */ +int cx18_pci_try_recover(struct cx18 *cx) +{ + u16 status; + + pci_read_config_word(cx->dev, PCI_STATUS, &status); + pci_write_config_word(cx->dev, PCI_STATUS, status); + return 0; +} diff --git a/drivers/media/video/cx18/cx18-io.h b/drivers/media/video/cx18/cx18-io.h new file mode 100644 index 0000000..7c08c0a --- /dev/null +++ b/drivers/media/video/cx18/cx18-io.h @@ -0,0 +1,69 @@ +/* + * cx18 driver PCI memory mapped IO access routines + * + * Copyright (C) 2007 Hans Verkuil + * Copyright (C) 2008 Andy Walls + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA + * 02111-1307 USA + */ + +#ifndef CX18_IO_H +#define CX18_IO_H + +#include "cx18-driver.h" + +/* This is a PCI post thing, where if the pci register is not read, then + the write doesn't always take effect right away. By reading back the + register any pending PCI writes will be performed (in order), and so + you can be sure that the writes are guaranteed to be done. + + Rarely needed, only in some timing sensitive cases. + Apparently if this is not done some motherboards seem + to kill the firmware and get into the broken state until computer is + rebooted. */ +u32 cx18_write_sync(struct cx18 *cx, u32 val, void __iomem *addr); + +void cx18_writel(struct cx18 *cx, u32 val, void __iomem *addr); +u32 cx18_readl(struct cx18 *cx, const void __iomem *addr); + +/* No endiannes conversion calls */ +void cx18_raw_writel(struct cx18 *cx, u32 val, void __iomem *addr); +u32 cx18_raw_readl(struct cx18 *cx, const void __iomem *addr); + +/* Access "register" region of CX23418 memory mapped I/O */ +u32 cx18_read_reg(struct cx18 *cx, u32 reg); +void cx18_write_reg(struct cx18 *cx, u32 val, u32 reg); +u32 cx18_write_reg_sync(struct cx18 *cx, u32 val, u32 reg); + +/* Access "encoder memory" region of CX23418 memory mapped I/O */ +u32 cx18_read_enc(struct cx18 *cx, u32 addr); +void cx18_write_enc(struct cx18 *cx, u32 val, u32 addr); +u32 cx18_write_enc_sync(struct cx18 *cx, u32 val, u32 addr); + +void cx18_memcpy_fromio(struct cx18 *cx, void *to, + const void __iomem *from, unsigned int len); +void cx18_memset_io(struct cx18 *cx, void __iomem *addr, int val, size_t count); + +void cx18_sw1_irq_enable(struct cx18 *cx, u32 val); +void cx18_sw1_irq_disable(struct cx18 *cx, u32 val); +void cx18_sw2_irq_enable(struct cx18 *cx, u32 val); +void cx18_sw2_irq_disable(struct cx18 *cx, u32 val); +void cx18_setup_page(struct cx18 *cx, u32 addr); + +/* Tries to recover from the CX23418 responding improperly on the PCI bus */ +int cx18_pci_try_recover(struct cx18 *cx); + +#endif /* CX18_IO_H */ diff --git a/drivers/media/video/cx18/cx18-ioctl.c b/drivers/media/video/cx18/cx18-ioctl.c index 84507a3..8b26b3f 100644 --- a/drivers/media/video/cx18/cx18-ioctl.c +++ b/drivers/media/video/cx18/cx18-ioctl.c @@ -22,6 +22,7 @@ */ #include "cx18-driver.h" +#include "cx18-io.h" #include "cx18-version.h" #include "cx18-mailbox.h" #include "cx18-i2c.h" @@ -286,9 +287,9 @@ static int cx18_cxc(struct cx18 *cx, unsigned int cmd, void *arg) spin_lock_irqsave(&cx18_cards_lock, flags); if (cmd == VIDIOC_DBG_G_REGISTER) - regs->val = read_enc(regs->reg); + regs->val = cx18_read_enc(cx, regs->reg); else - write_enc(regs->val, regs->reg); + cx18_write_enc(cx, regs->val, regs->reg); spin_unlock_irqrestore(&cx18_cards_lock, flags); return 0; } diff --git a/drivers/media/video/cx18/cx18-irq.c b/drivers/media/video/cx18/cx18-irq.c index ab21831..55a50a2 100644 --- a/drivers/media/video/cx18/cx18-irq.c +++ b/drivers/media/video/cx18/cx18-irq.c @@ -20,6 +20,7 @@ */ #include "cx18-driver.h" +#include "cx18-io.h" #include "cx18-firmware.h" #include "cx18-fileops.h" #include "cx18-queue.h" @@ -60,8 +61,8 @@ static void epu_dma_done(struct cx18 *cx, struct cx18_mailbox *mb) if (mb->args[2] != 1) CX18_WARN("Ack struct = %d for %s\n", mb->args[2], s->name); - id = read_enc(off); - buf = cx18_queue_get_buf_irq(s, id, read_enc(off + 4)); + id = cx18_read_enc(cx, off); + buf = cx18_queue_get_buf_irq(s, id, cx18_read_enc(cx, off + 4)); CX18_DEBUG_HI_DMA("DMA DONE for %s (buffer %d)\n", s->name, id); if (buf) { cx18_buf_sync_for_cpu(s, buf); @@ -81,7 +82,7 @@ static void epu_dma_done(struct cx18 *cx, struct cx18_mailbox *mb) set_bit(CX18_F_B_NEED_BUF_SWAP, &buf->b_flags); } else { CX18_WARN("Could not find buf %d for stream %s\n", - read_enc(off), s->name); + cx18_read_enc(cx, off), s->name); } mb->error = 0; mb->cmd = 0; @@ -97,8 +98,8 @@ static void epu_debug(struct cx18 *cx, struct cx18_mailbox *mb) char *p; if (mb->args[1]) { - setup_page(mb->args[1]); - memcpy_fromio(str, cx->enc_mem + mb->args[1], 252); + cx18_setup_page(cx, mb->args[1]); + cx18_memcpy_fromio(cx, str, cx->enc_mem + mb->args[1], 252); str[252] = 0; } cx18_mb_ack(cx, mb); @@ -113,7 +114,7 @@ static void hpu_cmd(struct cx18 *cx, u32 sw1) struct cx18_mailbox mb; if (sw1 & IRQ_CPU_TO_EPU) { - memcpy_fromio(&mb, &cx->scb->cpu2epu_mb, sizeof(mb)); + cx18_memcpy_fromio(cx, &mb, &cx->scb->cpu2epu_mb, sizeof(mb)); mb.error = 0; switch (mb.cmd) { @@ -141,16 +142,16 @@ irqreturn_t cx18_irq_handler(int irq, void *dev_id) spin_lock(&cx->dma_reg_lock); - hw2_mask = read_reg(HW2_INT_MASK5_PCI); - hw2 = read_reg(HW2_INT_CLR_STATUS) & hw2_mask; - sw2_mask = read_reg(SW2_INT_ENABLE_PCI) | IRQ_EPU_TO_HPU_ACK; - sw2 = read_reg(SW2_INT_STATUS) & sw2_mask; - sw1_mask = read_reg(SW1_INT_ENABLE_PCI) | IRQ_EPU_TO_HPU; - sw1 = read_reg(SW1_INT_STATUS) & sw1_mask; + hw2_mask = cx18_read_reg(cx, HW2_INT_MASK5_PCI); + hw2 = cx18_read_reg(cx, HW2_INT_CLR_STATUS) & hw2_mask; + sw2_mask = cx18_read_reg(cx, SW2_INT_ENABLE_PCI) | IRQ_EPU_TO_HPU_ACK; + sw2 = cx18_read_reg(cx, SW2_INT_STATUS) & sw2_mask; + sw1_mask = cx18_read_reg(cx, SW1_INT_ENABLE_PCI) | IRQ_EPU_TO_HPU; + sw1 = cx18_read_reg(cx, SW1_INT_STATUS) & sw1_mask; - write_reg(sw2&sw2_mask, SW2_INT_STATUS); - write_reg(sw1&sw1_mask, SW1_INT_STATUS); - write_reg(hw2&hw2_mask, HW2_INT_CLR_STATUS); + cx18_write_reg(cx, sw2&sw2_mask, SW2_INT_STATUS); + cx18_write_reg(cx, sw1&sw1_mask, SW1_INT_STATUS); + cx18_write_reg(cx, hw2&hw2_mask, HW2_INT_CLR_STATUS); if (sw1 || sw2 || hw2) CX18_DEBUG_HI_IRQ("SW1: %x SW2: %x HW2: %x\n", sw1, sw2, hw2); @@ -161,15 +162,15 @@ irqreturn_t cx18_irq_handler(int irq, void *dev_id) */ if (sw2) { - if (sw2 & (readl(&cx->scb->cpu2hpu_irq_ack) | - readl(&cx->scb->cpu2epu_irq_ack))) + if (sw2 & (cx18_readl(cx, &cx->scb->cpu2hpu_irq_ack) | + cx18_readl(cx, &cx->scb->cpu2epu_irq_ack))) wake_up(&cx->mb_cpu_waitq); - if (sw2 & (readl(&cx->scb->apu2hpu_irq_ack) | - readl(&cx->scb->apu2epu_irq_ack))) + if (sw2 & (cx18_readl(cx, &cx->scb->apu2hpu_irq_ack) | + cx18_readl(cx, &cx->scb->apu2epu_irq_ack))) wake_up(&cx->mb_apu_waitq); - if (sw2 & readl(&cx->scb->epu2hpu_irq_ack)) + if (sw2 & cx18_readl(cx, &cx->scb->epu2hpu_irq_ack)) wake_up(&cx->mb_epu_waitq); - if (sw2 & readl(&cx->scb->hpu2epu_irq_ack)) + if (sw2 & cx18_readl(cx, &cx->scb->hpu2epu_irq_ack)) wake_up(&cx->mb_hpu_waitq); } diff --git a/drivers/media/video/cx18/cx18-mailbox.c b/drivers/media/video/cx18/cx18-mailbox.c index 1b9fbf9..9d18dd2 100644 --- a/drivers/media/video/cx18/cx18-mailbox.c +++ b/drivers/media/video/cx18/cx18-mailbox.c @@ -22,6 +22,7 @@ #include #include "cx18-driver.h" +#include "cx18-io.h" #include "cx18-scb.h" #include "cx18-irq.h" #include "cx18-mailbox.h" @@ -106,20 +107,20 @@ static struct cx18_mailbox __iomem *cx18_mb_is_complete(struct cx18 *cx, int rpu switch (rpu) { case APU: mb = &cx->scb->epu2apu_mb; - *state = readl(&cx->scb->apu_state); - *irq = readl(&cx->scb->epu2apu_irq); + *state = cx18_readl(cx, &cx->scb->apu_state); + *irq = cx18_readl(cx, &cx->scb->epu2apu_irq); break; case CPU: mb = &cx->scb->epu2cpu_mb; - *state = readl(&cx->scb->cpu_state); - *irq = readl(&cx->scb->epu2cpu_irq); + *state = cx18_readl(cx, &cx->scb->cpu_state); + *irq = cx18_readl(cx, &cx->scb->epu2cpu_irq); break; case HPU: mb = &cx->scb->epu2hpu_mb; - *state = readl(&cx->scb->hpu_state); - *irq = readl(&cx->scb->epu2hpu_irq); + *state = cx18_readl(cx, &cx->scb->hpu_state); + *irq = cx18_readl(cx, &cx->scb->epu2hpu_irq); break; } @@ -127,8 +128,8 @@ static struct cx18_mailbox __iomem *cx18_mb_is_complete(struct cx18 *cx, int rpu return mb; do { - *req = readl(&mb->request); - ack = readl(&mb->ack); + *req = cx18_readl(cx, &mb->request); + ack = cx18_readl(cx, &mb->ack); wait_count++; } while (*req != ack && wait_count < 600); @@ -173,9 +174,9 @@ long cx18_mb_ack(struct cx18 *cx, const struct cx18_mailbox *mb) return -EINVAL; } - setup_page(SCB_OFFSET); - write_sync(mb->request, &ack_mb->ack); - write_reg(ack_irq, SW2_INT_SET); + cx18_setup_page(cx, SCB_OFFSET); + cx18_write_sync(cx, mb->request, &ack_mb->ack); + cx18_write_reg(cx, ack_irq, SW2_INT_SET); return 0; } @@ -200,7 +201,7 @@ static int cx18_api_call(struct cx18 *cx, u32 cmd, int args, u32 data[]) CX18_DEBUG_HI_API("%s\n", info->name); else CX18_DEBUG_API("%s\n", info->name); - setup_page(SCB_OFFSET); + cx18_setup_page(cx, SCB_OFFSET); mb = cx18_mb_is_complete(cx, info->rpu, &state, &irq, &req); if (mb == NULL) { @@ -209,11 +210,11 @@ static int cx18_api_call(struct cx18 *cx, u32 cmd, int args, u32 data[]) } oldreq = req - 1; - writel(cmd, &mb->cmd); + cx18_writel(cx, cmd, &mb->cmd); for (i = 0; i < args; i++) - writel(data[i], &mb->args[i]); - writel(0, &mb->error); - writel(req, &mb->request); + cx18_writel(cx, data[i], &mb->args[i]); + cx18_writel(cx, 0, &mb->error); + cx18_writel(cx, req, &mb->request); switch (info->rpu) { case APU: waitq = &cx->mb_apu_waitq; break; @@ -224,9 +225,10 @@ static int cx18_api_call(struct cx18 *cx, u32 cmd, int args, u32 data[]) } if (info->flags & API_FAST) timeout /= 2; - write_reg(irq, SW1_INT_SET); + cx18_write_reg(cx, irq, SW1_INT_SET); - while (!sig && readl(&mb->ack) != readl(&mb->request) && cnt < 660) { + while (!sig && cx18_readl(cx, &mb->ack) != cx18_readl(cx, &mb->request) + && cnt < 660) { if (cnt > 200 && !in_atomic()) sig = cx18_msleep_timeout(10, 1); cnt++; @@ -234,13 +236,13 @@ static int cx18_api_call(struct cx18 *cx, u32 cmd, int args, u32 data[]) if (sig) return -EINTR; if (cnt == 660) { - writel(oldreq, &mb->request); + cx18_writel(cx, oldreq, &mb->request); CX18_ERR("mb %s failed\n", info->name); return -EINVAL; } for (i = 0; i < MAX_MB_ARGUMENTS; i++) - data[i] = readl(&mb->args[i]); - err = readl(&mb->error); + data[i] = cx18_readl(cx, &mb->args[i]); + err = cx18_readl(cx, &mb->error); if (!in_atomic() && (info->flags & API_SLOW)) cx18_msleep_timeout(300, 0); if (err) diff --git a/drivers/media/video/cx18/cx18-queue.c b/drivers/media/video/cx18/cx18-queue.c index a33ba04..4897683 100644 --- a/drivers/media/video/cx18/cx18-queue.c +++ b/drivers/media/video/cx18/cx18-queue.c @@ -170,6 +170,7 @@ int cx18_stream_alloc(struct cx18_stream *s) } buf->id = cx->buffer_id++; INIT_LIST_HEAD(&buf->list); + /* FIXME - check for mmio */ buf->dma_handle = pci_map_single(s->cx->dev, buf->buf, s->buf_size, s->dma); cx18_buf_sync_for_cpu(s, buf); @@ -193,6 +194,7 @@ void cx18_stream_free(struct cx18_stream *s) /* empty q_free */ while ((buf = cx18_dequeue(s, &s->q_free))) { + /* FIXME - check for mmio */ pci_unmap_single(s->cx->dev, buf->dma_handle, s->buf_size, s->dma); kfree(buf->buf); diff --git a/drivers/media/video/cx18/cx18-queue.h b/drivers/media/video/cx18/cx18-queue.h index 7f93bb1..0c7df93 100644 --- a/drivers/media/video/cx18/cx18-queue.h +++ b/drivers/media/video/cx18/cx18-queue.h @@ -28,6 +28,7 @@ static inline void cx18_buf_sync_for_cpu(struct cx18_stream *s, struct cx18_buffer *buf) { + /* FIXME check IO transfers */ pci_dma_sync_single_for_cpu(s->cx->dev, buf->dma_handle, s->buf_size, s->dma); } @@ -35,6 +36,7 @@ static inline void cx18_buf_sync_for_cpu(struct cx18_stream *s, static inline void cx18_buf_sync_for_device(struct cx18_stream *s, struct cx18_buffer *buf) { + /* FIXME check IO transfers */ pci_dma_sync_single_for_device(s->cx->dev, buf->dma_handle, s->buf_size, s->dma); } diff --git a/drivers/media/video/cx18/cx18-scb.c b/drivers/media/video/cx18/cx18-scb.c index 30bc803..f56d377 100644 --- a/drivers/media/video/cx18/cx18-scb.c +++ b/drivers/media/video/cx18/cx18-scb.c @@ -20,102 +20,103 @@ */ #include "cx18-driver.h" +#include "cx18-io.h" #include "cx18-scb.h" void cx18_init_scb(struct cx18 *cx) { - setup_page(SCB_OFFSET); - memset_io(cx->scb, 0, 0x10000); + cx18_setup_page(cx, SCB_OFFSET); + cx18_memset_io(cx, cx->scb, 0, 0x10000); - writel(IRQ_APU_TO_CPU, &cx->scb->apu2cpu_irq); - writel(IRQ_CPU_TO_APU_ACK, &cx->scb->cpu2apu_irq_ack); - writel(IRQ_HPU_TO_CPU, &cx->scb->hpu2cpu_irq); - writel(IRQ_CPU_TO_HPU_ACK, &cx->scb->cpu2hpu_irq_ack); - writel(IRQ_PPU_TO_CPU, &cx->scb->ppu2cpu_irq); - writel(IRQ_CPU_TO_PPU_ACK, &cx->scb->cpu2ppu_irq_ack); - writel(IRQ_EPU_TO_CPU, &cx->scb->epu2cpu_irq); - writel(IRQ_CPU_TO_EPU_ACK, &cx->scb->cpu2epu_irq_ack); + cx18_writel(cx, IRQ_APU_TO_CPU, &cx->scb->apu2cpu_irq); + cx18_writel(cx, IRQ_CPU_TO_APU_ACK, &cx->scb->cpu2apu_irq_ack); + cx18_writel(cx, IRQ_HPU_TO_CPU, &cx->scb->hpu2cpu_irq); + cx18_writel(cx, IRQ_CPU_TO_HPU_ACK, &cx->scb->cpu2hpu_irq_ack); + cx18_writel(cx, IRQ_PPU_TO_CPU, &cx->scb->ppu2cpu_irq); + cx18_writel(cx, IRQ_CPU_TO_PPU_ACK, &cx->scb->cpu2ppu_irq_ack); + cx18_writel(cx, IRQ_EPU_TO_CPU, &cx->scb->epu2cpu_irq); + cx18_writel(cx, IRQ_CPU_TO_EPU_ACK, &cx->scb->cpu2epu_irq_ack); - writel(IRQ_CPU_TO_APU, &cx->scb->cpu2apu_irq); - writel(IRQ_APU_TO_CPU_ACK, &cx->scb->apu2cpu_irq_ack); - writel(IRQ_HPU_TO_APU, &cx->scb->hpu2apu_irq); - writel(IRQ_APU_TO_HPU_ACK, &cx->scb->apu2hpu_irq_ack); - writel(IRQ_PPU_TO_APU, &cx->scb->ppu2apu_irq); - writel(IRQ_APU_TO_PPU_ACK, &cx->scb->apu2ppu_irq_ack); - writel(IRQ_EPU_TO_APU, &cx->scb->epu2apu_irq); - writel(IRQ_APU_TO_EPU_ACK, &cx->scb->apu2epu_irq_ack); + cx18_writel(cx, IRQ_CPU_TO_APU, &cx->scb->cpu2apu_irq); + cx18_writel(cx, IRQ_APU_TO_CPU_ACK, &cx->scb->apu2cpu_irq_ack); + cx18_writel(cx, IRQ_HPU_TO_APU, &cx->scb->hpu2apu_irq); + cx18_writel(cx, IRQ_APU_TO_HPU_ACK, &cx->scb->apu2hpu_irq_ack); + cx18_writel(cx, IRQ_PPU_TO_APU, &cx->scb->ppu2apu_irq); + cx18_writel(cx, IRQ_APU_TO_PPU_ACK, &cx->scb->apu2ppu_irq_ack); + cx18_writel(cx, IRQ_EPU_TO_APU, &cx->scb->epu2apu_irq); + cx18_writel(cx, IRQ_APU_TO_EPU_ACK, &cx->scb->apu2epu_irq_ack); - writel(IRQ_CPU_TO_HPU, &cx->scb->cpu2hpu_irq); - writel(IRQ_HPU_TO_CPU_ACK, &cx->scb->hpu2cpu_irq_ack); - writel(IRQ_APU_TO_HPU, &cx->scb->apu2hpu_irq); - writel(IRQ_HPU_TO_APU_ACK, &cx->scb->hpu2apu_irq_ack); - writel(IRQ_PPU_TO_HPU, &cx->scb->ppu2hpu_irq); - writel(IRQ_HPU_TO_PPU_ACK, &cx->scb->hpu2ppu_irq_ack); - writel(IRQ_EPU_TO_HPU, &cx->scb->epu2hpu_irq); - writel(IRQ_HPU_TO_EPU_ACK, &cx->scb->hpu2epu_irq_ack); + cx18_writel(cx, IRQ_CPU_TO_HPU, &cx->scb->cpu2hpu_irq); + cx18_writel(cx, IRQ_HPU_TO_CPU_ACK, &cx->scb->hpu2cpu_irq_ack); + cx18_writel(cx, IRQ_APU_TO_HPU, &cx->scb->apu2hpu_irq); + cx18_writel(cx, IRQ_HPU_TO_APU_ACK, &cx->scb->hpu2apu_irq_ack); + cx18_writel(cx, IRQ_PPU_TO_HPU, &cx->scb->ppu2hpu_irq); + cx18_writel(cx, IRQ_HPU_TO_PPU_ACK, &cx->scb->hpu2ppu_irq_ack); + cx18_writel(cx, IRQ_EPU_TO_HPU, &cx->scb->epu2hpu_irq); + cx18_writel(cx, IRQ_HPU_TO_EPU_ACK, &cx->scb->hpu2epu_irq_ack); - writel(IRQ_CPU_TO_PPU, &cx->scb->cpu2ppu_irq); - writel(IRQ_PPU_TO_CPU_ACK, &cx->scb->ppu2cpu_irq_ack); - writel(IRQ_APU_TO_PPU, &cx->scb->apu2ppu_irq); - writel(IRQ_PPU_TO_APU_ACK, &cx->scb->ppu2apu_irq_ack); - writel(IRQ_HPU_TO_PPU, &cx->scb->hpu2ppu_irq); - writel(IRQ_PPU_TO_HPU_ACK, &cx->scb->ppu2hpu_irq_ack); - writel(IRQ_EPU_TO_PPU, &cx->scb->epu2ppu_irq); - writel(IRQ_PPU_TO_EPU_ACK, &cx->scb->ppu2epu_irq_ack); + cx18_writel(cx, IRQ_CPU_TO_PPU, &cx->scb->cpu2ppu_irq); + cx18_writel(cx, IRQ_PPU_TO_CPU_ACK, &cx->scb->ppu2cpu_irq_ack); + cx18_writel(cx, IRQ_APU_TO_PPU, &cx->scb->apu2ppu_irq); + cx18_writel(cx, IRQ_PPU_TO_APU_ACK, &cx->scb->ppu2apu_irq_ack); + cx18_writel(cx, IRQ_HPU_TO_PPU, &cx->scb->hpu2ppu_irq); + cx18_writel(cx, IRQ_PPU_TO_HPU_ACK, &cx->scb->ppu2hpu_irq_ack); + cx18_writel(cx, IRQ_EPU_TO_PPU, &cx->scb->epu2ppu_irq); + cx18_writel(cx, IRQ_PPU_TO_EPU_ACK, &cx->scb->ppu2epu_irq_ack); - writel(IRQ_CPU_TO_EPU, &cx->scb->cpu2epu_irq); - writel(IRQ_EPU_TO_CPU_ACK, &cx->scb->epu2cpu_irq_ack); - writel(IRQ_APU_TO_EPU, &cx->scb->apu2epu_irq); - writel(IRQ_EPU_TO_APU_ACK, &cx->scb->epu2apu_irq_ack); - writel(IRQ_HPU_TO_EPU, &cx->scb->hpu2epu_irq); - writel(IRQ_EPU_TO_HPU_ACK, &cx->scb->epu2hpu_irq_ack); - writel(IRQ_PPU_TO_EPU, &cx->scb->ppu2epu_irq); - writel(IRQ_EPU_TO_PPU_ACK, &cx->scb->epu2ppu_irq_ack); + cx18_writel(cx, IRQ_CPU_TO_EPU, &cx->scb->cpu2epu_irq); + cx18_writel(cx, IRQ_EPU_TO_CPU_ACK, &cx->scb->epu2cpu_irq_ack); + cx18_writel(cx, IRQ_APU_TO_EPU, &cx->scb->apu2epu_irq); + cx18_writel(cx, IRQ_EPU_TO_APU_ACK, &cx->scb->epu2apu_irq_ack); + cx18_writel(cx, IRQ_HPU_TO_EPU, &cx->scb->hpu2epu_irq); + cx18_writel(cx, IRQ_EPU_TO_HPU_ACK, &cx->scb->epu2hpu_irq_ack); + cx18_writel(cx, IRQ_PPU_TO_EPU, &cx->scb->ppu2epu_irq); + cx18_writel(cx, IRQ_EPU_TO_PPU_ACK, &cx->scb->epu2ppu_irq_ack); - writel(SCB_OFFSET + offsetof(struct cx18_scb, apu2cpu_mb), + cx18_writel(cx, SCB_OFFSET + offsetof(struct cx18_scb, apu2cpu_mb), &cx->scb->apu2cpu_mb_offset); - writel(SCB_OFFSET + offsetof(struct cx18_scb, hpu2cpu_mb), + cx18_writel(cx, SCB_OFFSET + offsetof(struct cx18_scb, hpu2cpu_mb), &cx->scb->hpu2cpu_mb_offset); - writel(SCB_OFFSET + offsetof(struct cx18_scb, ppu2cpu_mb), + cx18_writel(cx, SCB_OFFSET + offsetof(struct cx18_scb, ppu2cpu_mb), &cx->scb->ppu2cpu_mb_offset); - writel(SCB_OFFSET + offsetof(struct cx18_scb, epu2cpu_mb), + cx18_writel(cx, SCB_OFFSET + offsetof(struct cx18_scb, epu2cpu_mb), &cx->scb->epu2cpu_mb_offset); - writel(SCB_OFFSET + offsetof(struct cx18_scb, cpu2apu_mb), + cx18_writel(cx, SCB_OFFSET + offsetof(struct cx18_scb, cpu2apu_mb), &cx->scb->cpu2apu_mb_offset); - writel(SCB_OFFSET + offsetof(struct cx18_scb, hpu2apu_mb), + cx18_writel(cx, SCB_OFFSET + offsetof(struct cx18_scb, hpu2apu_mb), &cx->scb->hpu2apu_mb_offset); - writel(SCB_OFFSET + offsetof(struct cx18_scb, ppu2apu_mb), + cx18_writel(cx, SCB_OFFSET + offsetof(struct cx18_scb, ppu2apu_mb), &cx->scb->ppu2apu_mb_offset); - writel(SCB_OFFSET + offsetof(struct cx18_scb, epu2apu_mb), + cx18_writel(cx, SCB_OFFSET + offsetof(struct cx18_scb, epu2apu_mb), &cx->scb->epu2apu_mb_offset); - writel(SCB_OFFSET + offsetof(struct cx18_scb, cpu2hpu_mb), + cx18_writel(cx, SCB_OFFSET + offsetof(struct cx18_scb, cpu2hpu_mb), &cx->scb->cpu2hpu_mb_offset); - writel(SCB_OFFSET + offsetof(struct cx18_scb, apu2hpu_mb), + cx18_writel(cx, SCB_OFFSET + offsetof(struct cx18_scb, apu2hpu_mb), &cx->scb->apu2hpu_mb_offset); - writel(SCB_OFFSET + offsetof(struct cx18_scb, ppu2hpu_mb), + cx18_writel(cx, SCB_OFFSET + offsetof(struct cx18_scb, ppu2hpu_mb), &cx->scb->ppu2hpu_mb_offset); - writel(SCB_OFFSET + offsetof(struct cx18_scb, epu2hpu_mb), + cx18_writel(cx, SCB_OFFSET + offsetof(struct cx18_scb, epu2hpu_mb), &cx->scb->epu2hpu_mb_offset); - writel(SCB_OFFSET + offsetof(struct cx18_scb, cpu2ppu_mb), + cx18_writel(cx, SCB_OFFSET + offsetof(struct cx18_scb, cpu2ppu_mb), &cx->scb->cpu2ppu_mb_offset); - writel(SCB_OFFSET + offsetof(struct cx18_scb, apu2ppu_mb), + cx18_writel(cx, SCB_OFFSET + offsetof(struct cx18_scb, apu2ppu_mb), &cx->scb->apu2ppu_mb_offset); - writel(SCB_OFFSET + offsetof(struct cx18_scb, hpu2ppu_mb), + cx18_writel(cx, SCB_OFFSET + offsetof(struct cx18_scb, hpu2ppu_mb), &cx->scb->hpu2ppu_mb_offset); - writel(SCB_OFFSET + offsetof(struct cx18_scb, epu2ppu_mb), + cx18_writel(cx, SCB_OFFSET + offsetof(struct cx18_scb, epu2ppu_mb), &cx->scb->epu2ppu_mb_offset); - writel(SCB_OFFSET + offsetof(struct cx18_scb, cpu2epu_mb), + cx18_writel(cx, SCB_OFFSET + offsetof(struct cx18_scb, cpu2epu_mb), &cx->scb->cpu2epu_mb_offset); - writel(SCB_OFFSET + offsetof(struct cx18_scb, apu2epu_mb), + cx18_writel(cx, SCB_OFFSET + offsetof(struct cx18_scb, apu2epu_mb), &cx->scb->apu2epu_mb_offset); - writel(SCB_OFFSET + offsetof(struct cx18_scb, hpu2epu_mb), + cx18_writel(cx, SCB_OFFSET + offsetof(struct cx18_scb, hpu2epu_mb), &cx->scb->hpu2epu_mb_offset); - writel(SCB_OFFSET + offsetof(struct cx18_scb, ppu2epu_mb), + cx18_writel(cx, SCB_OFFSET + offsetof(struct cx18_scb, ppu2epu_mb), &cx->scb->ppu2epu_mb_offset); - writel(SCB_OFFSET + offsetof(struct cx18_scb, cpu_state), + cx18_writel(cx, SCB_OFFSET + offsetof(struct cx18_scb, cpu_state), &cx->scb->ipc_offset); - writel(1, &cx->scb->hpu_state); - writel(1, &cx->scb->epu_state); + cx18_writel(cx, 1, &cx->scb->hpu_state); + cx18_writel(cx, 1, &cx->scb->epu_state); } diff --git a/drivers/media/video/cx18/cx18-streams.c b/drivers/media/video/cx18/cx18-streams.c index 4d5b446..c752a6a 100644 --- a/drivers/media/video/cx18/cx18-streams.c +++ b/drivers/media/video/cx18/cx18-streams.c @@ -22,6 +22,7 @@ */ #include "cx18-driver.h" +#include "cx18-io.h" #include "cx18-fileops.h" #include "cx18-mailbox.h" #include "cx18-i2c.h" @@ -469,7 +470,7 @@ int cx18_start_v4l2_encode_stream(struct cx18_stream *s) if (atomic_read(&cx->tot_capturing) == 0) { clear_bit(CX18_F_I_EOS, &cx->i_flags); - write_reg(7, CX18_DSP0_INTERRUPT_MASK); + cx18_write_reg(cx, 7, CX18_DSP0_INTERRUPT_MASK); } cx18_vapi(cx, CX18_CPU_DE_SET_MDL_ACK, 3, s->handle, @@ -479,8 +480,9 @@ int cx18_start_v4l2_encode_stream(struct cx18_stream *s) list_for_each(p, &s->q_free.list) { struct cx18_buffer *buf = list_entry(p, struct cx18_buffer, list); - writel(buf->dma_handle, &cx->scb->cpu_mdl[buf->id].paddr); - writel(s->buf_size, &cx->scb->cpu_mdl[buf->id].length); + cx18_writel(cx, buf->dma_handle, + &cx->scb->cpu_mdl[buf->id].paddr); + cx18_writel(cx, s->buf_size, &cx->scb->cpu_mdl[buf->id].length); cx18_vapi(cx, CX18_CPU_DE_SET_MDL, 5, s->handle, (void __iomem *)&cx->scb->cpu_mdl[buf->id] - cx->enc_mem, 1, buf->id, s->buf_size); @@ -563,7 +565,7 @@ int cx18_stop_v4l2_encode_stream(struct cx18_stream *s, int gop_end) if (atomic_read(&cx->tot_capturing) > 0) return 0; - write_reg(5, CX18_DSP0_INTERRUPT_MASK); + cx18_write_reg(cx, 5, CX18_DSP0_INTERRUPT_MASK); wake_up(&s->waitq); return 0; -- cgit v0.10.2 From c641d09c60bfa36c7cf70444f24265090e51f5ce Mon Sep 17 00:00:00 2001 From: Andy Walls Date: Mon, 1 Sep 2008 00:40:41 -0300 Subject: V4L/DVB (8914): cx18: Throttle mmio to/from the CX23418 so boards work in older systems cx18: Throttle mmio to/from the CX23418 so boards work in older systems. The CX23418 couldn't reliably handle mmio at the rate at which the cx18 driver was attempting to access the chip. The PCI bridge arrangements and settings on modern motherboards still allowed the CX23418 to work OK, but it didn't work well on many older motherboards: mysterious I2C errors, firmware loading errors, etc. This patch adds a throttle to *all* mmio access to the CX23418. It defaults to a delay of 31 ns, but is adjustable by the mmio_ndelay module parm. My HVR-1600 and Raptor PAL/SECAM card now function for analog capture on a motherboard with an Intel 82810E Northbridge and 82801AA Southbridge. Signed-off-by: Andy Walls Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/cx18/cx18-driver.c b/drivers/media/video/cx18/cx18-driver.c index d31e1ec..202b281 100644 --- a/drivers/media/video/cx18/cx18-driver.c +++ b/drivers/media/video/cx18/cx18-driver.c @@ -4,6 +4,7 @@ * Derived from ivtv-driver.c * * Copyright (C) 2007 Hans Verkuil + * Copyright (C) 2008 Andy Walls * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -74,10 +75,14 @@ static int radio[CX18_MAX_CARDS] = { -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1 }; - +static int mmio_ndelay[CX18_MAX_CARDS] = { -1, -1, -1, -1, -1, -1, -1, -1, + -1, -1, -1, -1, -1, -1, -1, -1, + -1, -1, -1, -1, -1, -1, -1, -1, + -1, -1, -1, -1, -1, -1, -1, -1 }; static unsigned cardtype_c = 1; static unsigned tuner_c = 1; static unsigned radio_c = 1; +static int mmio_ndelay_c = 1; static char pal[] = "--"; static char secam[] = "--"; static char ntsc[] = "-"; @@ -96,6 +101,7 @@ int cx18_debug; module_param_array(tuner, int, &tuner_c, 0644); module_param_array(radio, bool, &radio_c, 0644); module_param_array(cardtype, int, &cardtype_c, 0644); +module_param_array(mmio_ndelay, int, &mmio_ndelay_c, 0644); module_param_string(pal, pal, sizeof(pal), 0644); module_param_string(secam, secam, sizeof(secam), 0644); module_param_string(ntsc, ntsc, sizeof(ntsc), 0644); @@ -141,6 +147,11 @@ MODULE_PARM_DESC(debug, MODULE_PARM_DESC(cx18_pci_latency, "Change the PCI latency to 64 if lower: 0 = No, 1 = Yes,\n" "\t\t\tDefault: Yes"); +MODULE_PARM_DESC(mmio_ndelay, + "Delay (ns) for each CX23418 memory mapped IO access.\n" + "\t\t\tTry larger values that are close to a multiple of the\n" + "\t\t\tPCI clock period, 30.3 ns, if your card doesn't work.\n" + "\t\t\tDefault: " __stringify(CX18_DEFAULT_MMIO_NDELAY)); MODULE_PARM_DESC(enc_mpg_buffers, "Encoder MPG Buffers (in MB)\n" "\t\t\tDefault: " __stringify(CX18_DEFAULT_ENC_MPG_BUFFERS)); @@ -357,6 +368,11 @@ static void cx18_process_options(struct cx18 *cx) cx->options.tuner = tuner[cx->num]; cx->options.radio = radio[cx->num]; + if (mmio_ndelay[cx->num] < 0) + cx->options.mmio_ndelay = CX18_DEFAULT_MMIO_NDELAY; + else + cx->options.mmio_ndelay = mmio_ndelay[cx->num]; + cx->std = cx18_parse_std(cx); if (cx->options.cardtype == -1) { CX18_INFO("Ignore card\n"); diff --git a/drivers/media/video/cx18/cx18-driver.h b/drivers/media/video/cx18/cx18-driver.h index 2cfdbe4..cc6f288 100644 --- a/drivers/media/video/cx18/cx18-driver.h +++ b/drivers/media/video/cx18/cx18-driver.h @@ -63,6 +63,9 @@ # error "This driver requires kernel PCI support." #endif +/* Default delay to throttle mmio access to the CX23418 so it doesn't choke */ +#define CX18_DEFAULT_MMIO_NDELAY 31 /* 30.3 ns = 1 PCI clock(s) / 33 MHz */ + #define CX18_MEM_OFFSET 0x00000000 #define CX18_MEM_SIZE 0x04000000 #define CX18_REG_OFFSET 0x02000000 @@ -176,6 +179,7 @@ struct cx18_options { int cardtype; /* force card type on load */ int tuner; /* set tuner on load */ int radio; /* enable/disable radio */ + unsigned long mmio_ndelay; /* delay in ns after every PCI mmio access */ }; /* per-buffer bit flags */ diff --git a/drivers/media/video/cx18/cx18-io.c b/drivers/media/video/cx18/cx18-io.c index c53d9b6..d92f627 100644 --- a/drivers/media/video/cx18/cx18-io.c +++ b/drivers/media/video/cx18/cx18-io.c @@ -21,76 +21,69 @@ */ #include "cx18-driver.h" +#include "cx18-io.h" #include "cx18-irq.h" -void cx18_raw_writel(struct cx18 *cx, u32 val, void __iomem *addr) -{ - __raw_writel(val, addr); -} - -u32 cx18_raw_readl(struct cx18 *cx, const void __iomem *addr) -{ - return __raw_readl(addr); -} - -u32 cx18_write_sync(struct cx18 *cx, u32 val, void __iomem *addr) -{ - writel(val, addr); - return readl(addr); -} - -void cx18_writel(struct cx18 *cx, u32 val, void __iomem *addr) -{ - writel(val, addr); -} - -u32 cx18_readl(struct cx18 *cx, const void __iomem *addr) -{ - return readl(addr); -} - - -/* Access "register" region of CX23418 memory mapped I/O */ -u32 cx18_read_reg(struct cx18 *cx, u32 reg) -{ - return readl(cx->reg_mem + reg); -} - -void cx18_write_reg(struct cx18 *cx, u32 val, u32 reg) -{ - writel(val, cx->reg_mem + reg); -} - -u32 cx18_write_reg_sync(struct cx18 *cx, u32 val, u32 reg) -{ - return cx18_write_sync(cx, val, cx->reg_mem + reg); -} - -/* Access "encoder memory" region of CX23418 memory mapped I/O */ -u32 cx18_read_enc(struct cx18 *cx, u32 addr) -{ - return readl(cx->enc_mem + addr); -} - -void cx18_write_enc(struct cx18 *cx, u32 val, u32 addr) -{ - writel(val, cx->enc_mem + addr); -} - -u32 cx18_write_enc_sync(struct cx18 *cx, u32 val, u32 addr) -{ - return cx18_write_sync(cx, val, cx->enc_mem + addr); -} - void cx18_memcpy_fromio(struct cx18 *cx, void *to, const void __iomem *from, unsigned int len) { - memcpy_fromio(to, from, len); + /* Align reads on the CX23418's addresses */ + if ((len > 0) && ((unsigned)from & 1)) { + *((u8 *)to) = cx18_readb(cx, from); + len--; + to++; + from++; + } + if ((len > 1) && ((unsigned)from & 2)) { + *((u16 *)to) = cx18_raw_readw(cx, from); + len -= 2; + to += 2; + from += 2; + } + while (len > 3) { + *((u32 *)to) = cx18_raw_readl(cx, from); + len -= 4; + to += 4; + from += 4; + } + if (len > 1) { + *((u16 *)to) = cx18_raw_readw(cx, from); + len -= 2; + to += 2; + from += 2; + } + if (len > 0) + *((u8 *)to) = cx18_readb(cx, from); } void cx18_memset_io(struct cx18 *cx, void __iomem *addr, int val, size_t count) { - memset_io(addr, val, count); + u16 val2 = val | (val << 8); + u32 val4 = val2 | (val2 << 16); + + /* Align writes on the CX23418's addresses */ + if ((count > 0) && ((unsigned)addr & 1)) { + cx18_writeb(cx, (u8) val, addr); + count--; + addr++; + } + if ((count > 1) && ((unsigned)addr & 2)) { + cx18_writew(cx, val2, addr); + count -= 2; + addr += 2; + } + while (count > 3) { + cx18_writel(cx, val4, addr); + count -= 4; + addr += 4; + } + if (count > 1) { + cx18_writew(cx, val2, addr); + count -= 2; + addr += 2; + } + if (count > 0) + cx18_writeb(cx, (u8) val, addr); } void cx18_sw1_irq_enable(struct cx18 *cx, u32 val) diff --git a/drivers/media/video/cx18/cx18-io.h b/drivers/media/video/cx18/cx18-io.h index 7c08c0a..7ab7be2 100644 --- a/drivers/media/video/cx18/cx18-io.h +++ b/drivers/media/video/cx18/cx18-io.h @@ -25,38 +25,109 @@ #include "cx18-driver.h" -/* This is a PCI post thing, where if the pci register is not read, then - the write doesn't always take effect right away. By reading back the - register any pending PCI writes will be performed (in order), and so - you can be sure that the writes are guaranteed to be done. +static inline void cx18_io_delay(struct cx18 *cx) +{ + if (cx->options.mmio_ndelay) + ndelay(cx->options.mmio_ndelay); +} - Rarely needed, only in some timing sensitive cases. - Apparently if this is not done some motherboards seem - to kill the firmware and get into the broken state until computer is - rebooted. */ -u32 cx18_write_sync(struct cx18 *cx, u32 val, void __iomem *addr); +/* Non byteswapping memory mapped IO */ +static inline void cx18_raw_writel(struct cx18 *cx, u32 val, void __iomem *addr) +{ + __raw_writel(val, addr); + cx18_io_delay(cx); +} -void cx18_writel(struct cx18 *cx, u32 val, void __iomem *addr); -u32 cx18_readl(struct cx18 *cx, const void __iomem *addr); +static inline u32 cx18_raw_readl(struct cx18 *cx, const void __iomem *addr) +{ + u32 ret = __raw_readl(addr); + cx18_io_delay(cx); + return ret; +} -/* No endiannes conversion calls */ -void cx18_raw_writel(struct cx18 *cx, u32 val, void __iomem *addr); -u32 cx18_raw_readl(struct cx18 *cx, const void __iomem *addr); +static inline u16 cx18_raw_readw(struct cx18 *cx, const void __iomem *addr) +{ + u16 ret = __raw_readw(addr); + cx18_io_delay(cx); + return ret; +} -/* Access "register" region of CX23418 memory mapped I/O */ -u32 cx18_read_reg(struct cx18 *cx, u32 reg); -void cx18_write_reg(struct cx18 *cx, u32 val, u32 reg); -u32 cx18_write_reg_sync(struct cx18 *cx, u32 val, u32 reg); +/* Normal memory mapped IO */ +static inline void cx18_writel(struct cx18 *cx, u32 val, void __iomem *addr) +{ + writel(val, addr); + cx18_io_delay(cx); +} -/* Access "encoder memory" region of CX23418 memory mapped I/O */ -u32 cx18_read_enc(struct cx18 *cx, u32 addr); -void cx18_write_enc(struct cx18 *cx, u32 val, u32 addr); -u32 cx18_write_enc_sync(struct cx18 *cx, u32 val, u32 addr); +static inline void cx18_writew(struct cx18 *cx, u16 val, void __iomem *addr) +{ + writew(val, addr); + cx18_io_delay(cx); +} + +static inline void cx18_writeb(struct cx18 *cx, u8 val, void __iomem *addr) +{ + writeb(val, addr); + cx18_io_delay(cx); +} + +static inline u32 cx18_readl(struct cx18 *cx, const void __iomem *addr) +{ + u32 ret = readl(addr); + cx18_io_delay(cx); + return ret; +} + +static inline u8 cx18_readb(struct cx18 *cx, const void __iomem *addr) +{ + u8 ret = readb(addr); + cx18_io_delay(cx); + return ret; +} + +static inline u32 cx18_write_sync(struct cx18 *cx, u32 val, void __iomem *addr) +{ + cx18_writel(cx, val, addr); + return cx18_readl(cx, addr); +} void cx18_memcpy_fromio(struct cx18 *cx, void *to, const void __iomem *from, unsigned int len); void cx18_memset_io(struct cx18 *cx, void __iomem *addr, int val, size_t count); +/* Access "register" region of CX23418 memory mapped I/O */ +static inline void cx18_write_reg(struct cx18 *cx, u32 val, u32 reg) +{ + cx18_writel(cx, val, cx->reg_mem + reg); +} + +static inline u32 cx18_read_reg(struct cx18 *cx, u32 reg) +{ + return cx18_readl(cx, cx->reg_mem + reg); +} + +static inline u32 cx18_write_reg_sync(struct cx18 *cx, u32 val, u32 reg) +{ + return cx18_write_sync(cx, val, cx->reg_mem + reg); +} + +/* Access "encoder memory" region of CX23418 memory mapped I/O */ +static inline void cx18_write_enc(struct cx18 *cx, u32 val, u32 addr) +{ + cx18_writel(cx, val, cx->enc_mem + addr); +} + +static inline u32 cx18_read_enc(struct cx18 *cx, u32 addr) +{ + return cx18_readl(cx, cx->enc_mem + addr); +} + +static inline u32 cx18_write_enc_sync(struct cx18 *cx, u32 val, u32 addr) +{ + return cx18_write_sync(cx, val, cx->enc_mem + addr); +} + + void cx18_sw1_irq_enable(struct cx18 *cx, u32 val); void cx18_sw1_irq_disable(struct cx18 *cx, u32 val); void cx18_sw2_irq_enable(struct cx18 *cx, u32 val); diff --git a/drivers/media/video/cx18/cx18-queue.c b/drivers/media/video/cx18/cx18-queue.c index 4897683..a33ba04 100644 --- a/drivers/media/video/cx18/cx18-queue.c +++ b/drivers/media/video/cx18/cx18-queue.c @@ -170,7 +170,6 @@ int cx18_stream_alloc(struct cx18_stream *s) } buf->id = cx->buffer_id++; INIT_LIST_HEAD(&buf->list); - /* FIXME - check for mmio */ buf->dma_handle = pci_map_single(s->cx->dev, buf->buf, s->buf_size, s->dma); cx18_buf_sync_for_cpu(s, buf); @@ -194,7 +193,6 @@ void cx18_stream_free(struct cx18_stream *s) /* empty q_free */ while ((buf = cx18_dequeue(s, &s->q_free))) { - /* FIXME - check for mmio */ pci_unmap_single(s->cx->dev, buf->dma_handle, s->buf_size, s->dma); kfree(buf->buf); diff --git a/drivers/media/video/cx18/cx18-queue.h b/drivers/media/video/cx18/cx18-queue.h index 0c7df93..7f93bb1 100644 --- a/drivers/media/video/cx18/cx18-queue.h +++ b/drivers/media/video/cx18/cx18-queue.h @@ -28,7 +28,6 @@ static inline void cx18_buf_sync_for_cpu(struct cx18_stream *s, struct cx18_buffer *buf) { - /* FIXME check IO transfers */ pci_dma_sync_single_for_cpu(s->cx->dev, buf->dma_handle, s->buf_size, s->dma); } @@ -36,7 +35,6 @@ static inline void cx18_buf_sync_for_cpu(struct cx18_stream *s, static inline void cx18_buf_sync_for_device(struct cx18_stream *s, struct cx18_buffer *buf) { - /* FIXME check IO transfers */ pci_dma_sync_single_for_device(s->cx->dev, buf->dma_handle, s->buf_size, s->dma); } -- cgit v0.10.2 From ac2b97b13e5627127b8e29dc0e1e1d7be03eaae4 Mon Sep 17 00:00:00 2001 From: Andy Walls Date: Thu, 4 Sep 2008 13:16:40 -0300 Subject: V4L/DVB (8915): cx18: Increment u8 pointers not void pointers. cx18: Increment u8 pointers not void pointers. Incrementing void pointers is dubious and the real intent in cx18_memcpy_fromio() and cx18_memset_io() is to increment by bytes, so use u8 pointers instead. Signed-off-by: Andy Walls Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/cx18/cx18-io.c b/drivers/media/video/cx18/cx18-io.c index d92f627..5d07b0f 100644 --- a/drivers/media/video/cx18/cx18-io.c +++ b/drivers/media/video/cx18/cx18-io.c @@ -27,63 +27,67 @@ void cx18_memcpy_fromio(struct cx18 *cx, void *to, const void __iomem *from, unsigned int len) { + const u8 *src = from; + u8 *dst = to; + /* Align reads on the CX23418's addresses */ - if ((len > 0) && ((unsigned)from & 1)) { - *((u8 *)to) = cx18_readb(cx, from); + if ((len > 0) && ((unsigned long) src & 1)) { + *dst = cx18_readb(cx, src); len--; - to++; - from++; + dst++; + src++; } - if ((len > 1) && ((unsigned)from & 2)) { - *((u16 *)to) = cx18_raw_readw(cx, from); + if ((len > 1) && ((unsigned long) src & 2)) { + *((u16 *)dst) = cx18_raw_readw(cx, src); len -= 2; - to += 2; - from += 2; + dst += 2; + src += 2; } while (len > 3) { - *((u32 *)to) = cx18_raw_readl(cx, from); + *((u32 *)dst) = cx18_raw_readl(cx, src); len -= 4; - to += 4; - from += 4; + dst += 4; + src += 4; } if (len > 1) { - *((u16 *)to) = cx18_raw_readw(cx, from); + *((u16 *)dst) = cx18_raw_readw(cx, src); len -= 2; - to += 2; - from += 2; + dst += 2; + src += 2; } if (len > 0) - *((u8 *)to) = cx18_readb(cx, from); + *dst = cx18_readb(cx, src); } void cx18_memset_io(struct cx18 *cx, void __iomem *addr, int val, size_t count) { + u8 *dst = addr; u16 val2 = val | (val << 8); u32 val4 = val2 | (val2 << 16); /* Align writes on the CX23418's addresses */ - if ((count > 0) && ((unsigned)addr & 1)) { - cx18_writeb(cx, (u8) val, addr); + if ((count > 0) && ((unsigned long)dst & 1)) { + cx18_writeb(cx, (u8) val, dst); count--; - addr++; + dst++; } - if ((count > 1) && ((unsigned)addr & 2)) { - cx18_writew(cx, val2, addr); + if ((count > 1) && ((unsigned long)dst & 2)) { + cx18_writew(cx, val2, dst); count -= 2; - addr += 2; + dst += 2; } while (count > 3) { - cx18_writel(cx, val4, addr); + cx18_writel(cx, val4, dst); count -= 4; - addr += 4; + dst += 4; } if (count > 1) { - cx18_writew(cx, val2, addr); + cx18_writew(cx, val2, dst); count -= 2; - addr += 2; + dst += 2; } if (count > 0) - cx18_writeb(cx, (u8) val, addr); + cx18_writeb(cx, (u8) val, dst); } void cx18_sw1_irq_enable(struct cx18 *cx, u32 val) -- cgit v0.10.2 From 9afb7377ef16a73d1ae7b089aa853e00a3facea8 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Sat, 6 Sep 2008 06:34:44 -0300 Subject: V4L/DVB (8917): saa7134-empress: fix changing the capture standard for non-tuner inputs When changing the standard the saa6752hs was not updated unless the input was the TV tuner. The saa6752hs should be updated regardless of the input. In addition the S_STD and G_STD ioctls for the mpeg video device didn't do anything. This is now fixed: they behave just like S_STD and G_STD on the video0 device. Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/saa7134/saa7134-empress.c b/drivers/media/video/saa7134/saa7134-empress.c index 946edf6..9a8766a 100644 --- a/drivers/media/video/saa7134/saa7134-empress.c +++ b/drivers/media/video/saa7134/saa7134-empress.c @@ -303,15 +303,6 @@ static int empress_streamoff(struct file *file, void *priv, return videobuf_streamoff(&dev->empress_tsq); } -static int saa7134_i2c_call_saa6752(struct saa7134_dev *dev, - unsigned int cmd, void *arg) -{ - if (dev->mpeg_i2c_client == NULL) - return -EINVAL; - return dev->mpeg_i2c_client->driver->command(dev->mpeg_i2c_client, - cmd, arg); -} - static int empress_s_ext_ctrls(struct file *file, void *priv, struct v4l2_ext_controls *ctrls) { @@ -431,6 +422,20 @@ static int empress_g_chip_ident(struct file *file, void *fh, return -EINVAL; } +static int empress_s_std(struct file *file, void *priv, v4l2_std_id *id) +{ + struct saa7134_dev *dev = file->private_data; + + return saa7134_s_std_internal(dev, NULL, id); +} + +static int empress_g_std(struct file *file, void *priv, v4l2_std_id *id) +{ + struct saa7134_dev *dev = file->private_data; + + *id = dev->tvnorm->id; + return 0; +} static const struct file_operations ts_fops = { @@ -465,6 +470,8 @@ static const struct v4l2_ioctl_ops ts_ioctl_ops = { .vidioc_g_ctrl = empress_g_ctrl, .vidioc_s_ctrl = empress_s_ctrl, .vidioc_g_chip_ident = empress_g_chip_ident, + .vidioc_s_std = empress_s_std, + .vidioc_g_std = empress_g_std, }; /* ----------------------------------------------------------- */ diff --git a/drivers/media/video/saa7134/saa7134-i2c.c b/drivers/media/video/saa7134/saa7134-i2c.c index 5f713e6..b02965c 100644 --- a/drivers/media/video/saa7134/saa7134-i2c.c +++ b/drivers/media/video/saa7134/saa7134-i2c.c @@ -427,6 +427,16 @@ void saa7134_i2c_call_clients(struct saa7134_dev *dev, i2c_clients_command(&dev->i2c_adap, cmd, arg); } +int saa7134_i2c_call_saa6752(struct saa7134_dev *dev, + unsigned int cmd, void *arg) +{ + if (dev->mpeg_i2c_client == NULL) + return -EINVAL; + return dev->mpeg_i2c_client->driver->command(dev->mpeg_i2c_client, + cmd, arg); +} +EXPORT_SYMBOL_GPL(saa7134_i2c_call_saa6752); + int saa7134_i2c_register(struct saa7134_dev *dev) { dev->i2c_adap = saa7134_adap_template; diff --git a/drivers/media/video/saa7134/saa7134-video.c b/drivers/media/video/saa7134/saa7134-video.c index 8fd3113..9aafd58 100644 --- a/drivers/media/video/saa7134/saa7134-video.c +++ b/drivers/media/video/saa7134/saa7134-video.c @@ -628,6 +628,9 @@ void saa7134_set_tvnorm_hw(struct saa7134_dev *dev) if (card_in(dev, dev->ctl_input).tv) saa7134_i2c_call_clients(dev, VIDIOC_S_STD, &dev->tvnorm->id); + /* Set the correct norm for the saa6752hs. This function + does nothing if there is no saa6752hs. */ + saa7134_i2c_call_saa6752(dev, VIDIOC_S_STD, &dev->tvnorm->id); } static void set_h_prescale(struct saa7134_dev *dev, int task, int prescale) @@ -1796,18 +1799,25 @@ static int saa7134_querycap(struct file *file, void *priv, return 0; } -static int saa7134_s_std(struct file *file, void *priv, v4l2_std_id *id) +int saa7134_s_std_internal(struct saa7134_dev *dev, struct saa7134_fh *fh, v4l2_std_id *id) { - struct saa7134_fh *fh = priv; - struct saa7134_dev *dev = fh->dev; unsigned long flags; unsigned int i; v4l2_std_id fixup; int err; - err = v4l2_prio_check(&dev->prio, &fh->prio); - if (0 != err) - return err; + /* When called from the empress code fh == NULL. + That needs to be fixed somehow, but for now this is + good enough. */ + if (fh) { + err = v4l2_prio_check(&dev->prio, &fh->prio); + if (0 != err) + return err; + } else if (res_locked(dev, RESOURCE_OVERLAY)) { + /* Don't change the std from the mpeg device + if overlay is active. */ + return -EBUSY; + } for (i = 0; i < TVNORMS; i++) if (*id == tvnorms[i].id) @@ -1840,7 +1850,7 @@ static int saa7134_s_std(struct file *file, void *priv, v4l2_std_id *id) *id = tvnorms[i].id; mutex_lock(&dev->lock); - if (res_check(fh, RESOURCE_OVERLAY)) { + if (fh && res_check(fh, RESOURCE_OVERLAY)) { spin_lock_irqsave(&dev->slock, flags); stop_preview(dev, fh); spin_unlock_irqrestore(&dev->slock, flags); @@ -1857,6 +1867,23 @@ static int saa7134_s_std(struct file *file, void *priv, v4l2_std_id *id) mutex_unlock(&dev->lock); return 0; } +EXPORT_SYMBOL_GPL(saa7134_s_std_internal); + +static int saa7134_s_std(struct file *file, void *priv, v4l2_std_id *id) +{ + struct saa7134_fh *fh = priv; + + return saa7134_s_std_internal(fh->dev, fh, id); +} + +static int saa7134_g_std(struct file *file, void *priv, v4l2_std_id *id) +{ + struct saa7134_fh *fh = priv; + struct saa7134_dev *dev = fh->dev; + + *id = dev->tvnorm->id; + return 0; +} static int saa7134_cropcap(struct file *file, void *priv, struct v4l2_cropcap *cap) @@ -2397,6 +2424,7 @@ static const struct v4l2_ioctl_ops video_ioctl_ops = { .vidioc_qbuf = saa7134_qbuf, .vidioc_dqbuf = saa7134_dqbuf, .vidioc_s_std = saa7134_s_std, + .vidioc_g_std = saa7134_g_std, .vidioc_enum_input = saa7134_enum_input, .vidioc_g_input = saa7134_g_input, .vidioc_s_input = saa7134_s_input, diff --git a/drivers/media/video/saa7134/saa7134.h b/drivers/media/video/saa7134/saa7134.h index a1e0dad..5e7fc73 100644 --- a/drivers/media/video/saa7134/saa7134.h +++ b/drivers/media/video/saa7134/saa7134.h @@ -662,6 +662,8 @@ int saa7134_i2c_register(struct saa7134_dev *dev); int saa7134_i2c_unregister(struct saa7134_dev *dev); void saa7134_i2c_call_clients(struct saa7134_dev *dev, unsigned int cmd, void *arg); +int saa7134_i2c_call_saa6752(struct saa7134_dev *dev, + unsigned int cmd, void *arg); /* ----------------------------------------------------------- */ @@ -674,6 +676,7 @@ extern struct video_device saa7134_radio_template; int saa7134_s_ctrl_internal(struct saa7134_dev *dev, struct saa7134_fh *fh, struct v4l2_control *c); int saa7134_g_ctrl_internal(struct saa7134_dev *dev, struct saa7134_fh *fh, struct v4l2_control *c); int saa7134_queryctrl(struct file *file, void *priv, struct v4l2_queryctrl *c); +int saa7134_s_std_internal(struct saa7134_dev *dev, struct saa7134_fh *fh, v4l2_std_id *id); int saa7134_videoport_init(struct saa7134_dev *dev); void saa7134_set_tvnorm_hw(struct saa7134_dev *dev); -- cgit v0.10.2 From ff5f26b40ab43a6c263834665bfa10d6114a27cd Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Sat, 6 Sep 2008 07:00:24 -0300 Subject: V4L/DVB (8918): saa6752hs: simplify writing to registers Add some utility functions to set registers. Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/saa7134/saa6752hs.c b/drivers/media/video/saa7134/saa6752hs.c index f40cb0b..1fb6ecc 100644 --- a/drivers/media/video/saa7134/saa6752hs.c +++ b/drivers/media/video/saa7134/saa6752hs.c @@ -224,7 +224,7 @@ static struct saa6752hs_mpeg_params param_defaults = /* ---------------------------------------------------------------------- */ -static int saa6752hs_chip_command(struct i2c_client* client, +static int saa6752hs_chip_command(struct i2c_client *client, enum saa6752hs_command command) { unsigned char buf[3]; @@ -291,54 +291,61 @@ static int saa6752hs_chip_command(struct i2c_client* client, } -static int saa6752hs_set_bitrate(struct i2c_client* client, +static inline void set_reg8(struct i2c_client *client, uint8_t reg, uint8_t val) +{ + u8 buf[2]; + + buf[0] = reg; + buf[1] = val; + i2c_master_send(client, buf, 2); +} + +static inline void set_reg16(struct i2c_client *client, uint8_t reg, uint16_t val) +{ + u8 buf[3]; + + buf[0] = reg; + buf[1] = val >> 8; + buf[2] = val & 0xff; + i2c_master_send(client, buf, 3); +} + +static int saa6752hs_set_bitrate(struct i2c_client *client, struct saa6752hs_state *h) { struct saa6752hs_mpeg_params *params = &h->params; - u8 buf[3]; int tot_bitrate; + int is_384k; /* set the bitrate mode */ - buf[0] = 0x71; - buf[1] = (params->vi_bitrate_mode == V4L2_MPEG_VIDEO_BITRATE_MODE_VBR) ? 0 : 1; - i2c_master_send(client, buf, 2); + set_reg8(client, 0x71, + params->vi_bitrate_mode != V4L2_MPEG_VIDEO_BITRATE_MODE_VBR); /* set the video bitrate */ if (params->vi_bitrate_mode == V4L2_MPEG_VIDEO_BITRATE_MODE_VBR) { /* set the target bitrate */ - buf[0] = 0x80; - buf[1] = params->vi_bitrate >> 8; - buf[2] = params->vi_bitrate & 0xff; - i2c_master_send(client, buf, 3); + set_reg16(client, 0x80, params->vi_bitrate); /* set the max bitrate */ - buf[0] = 0x81; - buf[1] = params->vi_bitrate_peak >> 8; - buf[2] = params->vi_bitrate_peak & 0xff; - i2c_master_send(client, buf, 3); + set_reg16(client, 0x81, params->vi_bitrate_peak); tot_bitrate = params->vi_bitrate_peak; } else { /* set the target bitrate (no max bitrate for CBR) */ - buf[0] = 0x81; - buf[1] = params->vi_bitrate >> 8; - buf[2] = params->vi_bitrate & 0xff; - i2c_master_send(client, buf, 3); + set_reg16(client, 0x81, params->vi_bitrate); tot_bitrate = params->vi_bitrate; } /* set the audio encoding */ - buf[0] = 0x93; - buf[1] = (params->au_encoding == V4L2_MPEG_AUDIO_ENCODING_AC3); - i2c_master_send(client, buf, 2); + set_reg8(client, 0x93, + params->au_encoding == V4L2_MPEG_AUDIO_ENCODING_AC3); /* set the audio bitrate */ - buf[0] = 0x94; if (params->au_encoding == V4L2_MPEG_AUDIO_ENCODING_AC3) - buf[1] = V4L2_MPEG_AUDIO_AC3_BITRATE_384K == params->au_ac3_bitrate; + is_384k = V4L2_MPEG_AUDIO_AC3_BITRATE_384K == params->au_ac3_bitrate; else - buf[1] = V4L2_MPEG_AUDIO_L2_BITRATE_384K == params->au_l2_bitrate; - tot_bitrate += buf[1] ? 384 : 256; - i2c_master_send(client, buf, 2); + is_384k = V4L2_MPEG_AUDIO_L2_BITRATE_384K == params->au_l2_bitrate; + set_reg8(client, 0x94, is_384k); + tot_bitrate += is_384k ? 384 : 256; /* Note: the total max bitrate is determined by adding the video and audio bitrates together and also adding an extra 768kbit/s to stay on the @@ -349,16 +356,12 @@ static int saa6752hs_set_bitrate(struct i2c_client* client, tot_bitrate = MPEG_TOTAL_TARGET_BITRATE_MAX; /* set the total bitrate */ - buf[0] = 0xb1; - buf[1] = tot_bitrate >> 8; - buf[2] = tot_bitrate & 0xff; - i2c_master_send(client, buf, 3); - + set_reg16(client, 0xb1, tot_bitrate); return 0; } -static void saa6752hs_set_subsampling(struct i2c_client* client, - struct v4l2_format* f) +static void saa6752hs_set_subsampling(struct i2c_client *client, + struct v4l2_format *f) { struct saa6752hs_state *h = i2c_get_clientdata(client); int dist_352, dist_480, dist_720; @@ -665,51 +668,31 @@ static int saa6752hs_init(struct i2c_client *client, u32 leading_null_bytes) h = i2c_get_clientdata(client); /* Set video format - must be done first as it resets other settings */ - buf[0] = 0x41; - buf[1] = h->video_format; - i2c_master_send(client, buf, 2); + set_reg8(client, 0x41, h->video_format); /* Set number of lines in input signal */ - buf[0] = 0x40; - buf[1] = 0x00; - if (h->standard & V4L2_STD_525_60) - buf[1] = 0x01; - i2c_master_send(client, buf, 2); + set_reg8(client, 0x40, (h->standard & V4L2_STD_525_60) ? 1 : 0); /* set bitrate */ saa6752hs_set_bitrate(client, h); /* Set GOP structure {3, 13} */ - buf[0] = 0x72; - buf[1] = 0x03; - buf[2] = 0x0D; - i2c_master_send(client,buf,3); + set_reg16(client, 0x72, 0x030d); /* Set minimum Q-scale {4} */ - buf[0] = 0x82; - buf[1] = 0x04; - i2c_master_send(client,buf,2); + set_reg8(client, 0x82, 0x04); /* Set maximum Q-scale {12} */ - buf[0] = 0x83; - buf[1] = 0x0C; - i2c_master_send(client,buf,2); + set_reg8(client, 0x83, 0x0c); /* Set Output Protocol */ - buf[0] = 0xD0; - buf[1] = 0x81; - i2c_master_send(client,buf,2); + set_reg8(client, 0xd0, 0x81); /* Set video output stream format {TS} */ - buf[0] = 0xB0; - buf[1] = 0x05; - i2c_master_send(client,buf,2); + set_reg8(client, 0xb0, 0x05); /* Set leading null byte for TS */ - buf[0] = 0xF6; - buf[1] = (leading_null_bytes >> 8) & 0xff; - buf[2] = leading_null_bytes & 0xff; - i2c_master_send(client, buf, 3); + set_reg16(client, 0xf6, leading_null_bytes); /* compute PAT */ memcpy(localPAT, PAT, sizeof(PAT)); @@ -744,33 +727,21 @@ static int saa6752hs_init(struct i2c_client *client, u32 leading_null_bytes) localPMT[size - 1] = crc & 0xFF; /* Set Audio PID */ - buf[0] = 0xC1; - buf[1] = (h->params.ts_pid_audio >> 8) & 0xFF; - buf[2] = h->params.ts_pid_audio & 0xFF; - i2c_master_send(client,buf,3); + set_reg16(client, 0xc1, h->params.ts_pid_audio); /* Set Video PID */ - buf[0] = 0xC0; - buf[1] = (h->params.ts_pid_video >> 8) & 0xFF; - buf[2] = h->params.ts_pid_video & 0xFF; - i2c_master_send(client,buf,3); + set_reg16(client, 0xc0, h->params.ts_pid_video); /* Set PCR PID */ - buf[0] = 0xC4; - buf[1] = (h->params.ts_pid_pcr >> 8) & 0xFF; - buf[2] = h->params.ts_pid_pcr & 0xFF; - i2c_master_send(client,buf,3); + set_reg16(client, 0xc4, h->params.ts_pid_pcr); /* Send SI tables */ i2c_master_send(client, localPAT, sizeof(PAT)); i2c_master_send(client, localPMT, size); /* mute then unmute audio. This removes buzzing artefacts */ - buf[0] = 0xa4; - buf[1] = 1; - i2c_master_send(client, buf, 2); - buf[1] = 0; - i2c_master_send(client, buf, 2); + set_reg8(client, 0xa4, 1); + set_reg8(client, 0xa4, 0); /* start it going */ saa6752hs_chip_command(client, SAA6752HS_COMMAND_START); -- cgit v0.10.2 From effc3466d32108bec7da19aa23c1fddee9cafbab Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Sat, 6 Sep 2008 08:24:37 -0300 Subject: V4L/DVB (8920): cx18/ivtv: fix check of window boundaries for VIDIOC_S_FMT It was possible to set out-of-bounds windows sizes, this is now fixed. Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/cx18/cx18-ioctl.c b/drivers/media/video/cx18/cx18-ioctl.c index 8b26b3f..4a47f61 100644 --- a/drivers/media/video/cx18/cx18-ioctl.c +++ b/drivers/media/video/cx18/cx18-ioctl.c @@ -171,7 +171,6 @@ static int cx18_try_fmt_vid_cap(struct file *file, void *fh, { struct cx18_open_id *id = fh; struct cx18 *cx = id->cx; - int w = fmt->fmt.pix.width; int h = fmt->fmt.pix.height; @@ -203,8 +202,7 @@ static int cx18_s_fmt_vid_cap(struct file *file, void *fh, struct cx18_open_id *id = fh; struct cx18 *cx = id->cx; int ret; - int w = fmt->fmt.pix.width; - int h = fmt->fmt.pix.height; + int w, h; ret = v4l2_prio_check(&cx->prio, &id->prio); if (ret) @@ -213,6 +211,8 @@ static int cx18_s_fmt_vid_cap(struct file *file, void *fh, ret = cx18_try_fmt_vid_cap(file, fh, fmt); if (ret) return ret; + w = fmt->fmt.pix.width; + h = fmt->fmt.pix.height; if (cx->params.width == w && cx->params.height == h) return 0; diff --git a/drivers/media/video/ivtv/ivtv-ioctl.c b/drivers/media/video/ivtv/ivtv-ioctl.c index 6103030..e67bf1b 100644 --- a/drivers/media/video/ivtv/ivtv-ioctl.c +++ b/drivers/media/video/ivtv/ivtv-ioctl.c @@ -512,27 +512,20 @@ static int ivtv_try_fmt_sliced_vbi_cap(struct file *file, void *fh, struct v4l2_ static int ivtv_try_fmt_vid_out(struct file *file, void *fh, struct v4l2_format *fmt) { struct ivtv_open_id *id = fh; - s32 w, h; - int field; - int ret; + s32 w = fmt->fmt.pix.width; + s32 h = fmt->fmt.pix.height; + int field = fmt->fmt.pix.field; + int ret = ivtv_g_fmt_vid_out(file, fh, fmt); - w = fmt->fmt.pix.width; - h = fmt->fmt.pix.height; - field = fmt->fmt.pix.field; - ret = ivtv_g_fmt_vid_out(file, fh, fmt); - fmt->fmt.pix.width = w; - fmt->fmt.pix.height = h; if (!ret && id->type == IVTV_DEC_STREAM_TYPE_YUV) { fmt->fmt.pix.field = field; - if (fmt->fmt.pix.width < 2) - fmt->fmt.pix.width = 2; - if (fmt->fmt.pix.width > 720) - fmt->fmt.pix.width = 720; - if (fmt->fmt.pix.height < 2) - fmt->fmt.pix.height = 2; - if (fmt->fmt.pix.height > 576) - fmt->fmt.pix.height = 576; + w = min(w, 720); + w = max(w, 2); + h = min(h, 576); + h = max(h, 2); } + fmt->fmt.pix.width = w; + fmt->fmt.pix.height = h; return ret; } @@ -560,9 +553,9 @@ static int ivtv_s_fmt_vid_cap(struct file *file, void *fh, struct v4l2_format *f struct ivtv_open_id *id = fh; struct ivtv *itv = id->itv; struct cx2341x_mpeg_params *p = &itv->params; + int ret = ivtv_try_fmt_vid_cap(file, fh, fmt); int w = fmt->fmt.pix.width; int h = fmt->fmt.pix.height; - int ret = ivtv_try_fmt_vid_cap(file, fh, fmt); if (ret) return ret; -- cgit v0.10.2 From 854ad9abcc7c1aa143d1a18409d4f366d4326a80 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Sat, 6 Sep 2008 09:56:17 -0300 Subject: V4L/DVB (8921): ivtv: fix incorrect capability and assorted sliced vbi and video out fmt fixes - V4L2_CAP_VBI_OUTPUT is not supported by ivtv, remove it. - ivtv_try_fmt_vid_out also needed to constrain the width/height of MPEG decoder window sizes. - allow empty sliced services. Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/ivtv/ivtv-cards.h b/drivers/media/video/ivtv/ivtv-cards.h index 381af1b..0b8fe85 100644 --- a/drivers/media/video/ivtv/ivtv-cards.h +++ b/drivers/media/video/ivtv/ivtv-cards.h @@ -154,7 +154,7 @@ #define IVTV_CAP_ENCODER (V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_TUNER | \ V4L2_CAP_AUDIO | V4L2_CAP_READWRITE | V4L2_CAP_VBI_CAPTURE | \ V4L2_CAP_SLICED_VBI_CAPTURE) -#define IVTV_CAP_DECODER (V4L2_CAP_VBI_OUTPUT | V4L2_CAP_VIDEO_OUTPUT | \ +#define IVTV_CAP_DECODER (V4L2_CAP_VIDEO_OUTPUT | \ V4L2_CAP_SLICED_VBI_OUTPUT | V4L2_CAP_VIDEO_OUTPUT_OVERLAY) struct ivtv_card_video_input { diff --git a/drivers/media/video/ivtv/ivtv-ioctl.c b/drivers/media/video/ivtv/ivtv-ioctl.c index e67bf1b..f00854a 100644 --- a/drivers/media/video/ivtv/ivtv-ioctl.c +++ b/drivers/media/video/ivtv/ivtv-ioctl.c @@ -101,18 +101,15 @@ void ivtv_expand_service_set(struct v4l2_sliced_vbi_format *fmt, int is_pal) } } -static int check_service_set(struct v4l2_sliced_vbi_format *fmt, int is_pal) +static void check_service_set(struct v4l2_sliced_vbi_format *fmt, int is_pal) { int f, l; - u16 set = 0; for (f = 0; f < 2; f++) { for (l = 0; l < 24; l++) { fmt->service_lines[f][l] = select_service_from_set(f, l, fmt->service_lines[f][l], is_pal); - set |= fmt->service_lines[f][l]; } } - return set != 0; } u16 ivtv_get_service_set(struct v4l2_sliced_vbi_format *fmt) @@ -474,7 +471,7 @@ static int ivtv_try_fmt_vid_cap(struct file *file, void *fh, struct v4l2_format int h = fmt->fmt.pix.height; w = min(w, 720); - w = max(w, 1); + w = max(w, 2); h = min(h, itv->is_50hz ? 576 : 480); h = max(h, 2); ivtv_g_fmt_vid_cap(file, fh, fmt); @@ -512,18 +509,18 @@ static int ivtv_try_fmt_sliced_vbi_cap(struct file *file, void *fh, struct v4l2_ static int ivtv_try_fmt_vid_out(struct file *file, void *fh, struct v4l2_format *fmt) { struct ivtv_open_id *id = fh; + struct ivtv *itv = id->itv; s32 w = fmt->fmt.pix.width; s32 h = fmt->fmt.pix.height; int field = fmt->fmt.pix.field; int ret = ivtv_g_fmt_vid_out(file, fh, fmt); - if (!ret && id->type == IVTV_DEC_STREAM_TYPE_YUV) { + w = min(w, 720); + w = max(w, 2); + h = min(h, itv->is_out_50hz ? 576 : 480); + h = max(h, 2); + if (id->type == IVTV_DEC_STREAM_TYPE_YUV) fmt->fmt.pix.field = field; - w = min(w, 720); - w = max(w, 2); - h = min(h, 576); - h = max(h, 2); - } fmt->fmt.pix.width = w; fmt->fmt.pix.height = h; return ret; @@ -593,8 +590,7 @@ static int ivtv_s_fmt_sliced_vbi_cap(struct file *file, void *fh, struct v4l2_fo if (ret || id->type == IVTV_DEC_STREAM_TYPE_VBI) return ret; - if (check_service_set(vbifmt, itv->is_50hz) == 0) - return -EINVAL; + check_service_set(vbifmt, itv->is_50hz); if (atomic_read(&itv->capturing) > 0) return -EBUSY; itv->video_dec_func(itv, VIDIOC_S_FMT, fmt); -- cgit v0.10.2 From 446f245977e9c2ac4507c3543c7e2a587f46beab Mon Sep 17 00:00:00 2001 From: Andy Walls Date: Sat, 6 Sep 2008 16:43:59 -0300 Subject: V4L/DVB (8924): cx18: Set mmio throttling delay default to 0 nsec. cx18: Set mmio throttling delay default to 0 nsec. Not doing so makes analog tuner audio not work on some mahcines. Signed-off-by: Andy Walls Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/cx18/cx18-driver.h b/drivers/media/video/cx18/cx18-driver.h index cc6f288..66cb748 100644 --- a/drivers/media/video/cx18/cx18-driver.h +++ b/drivers/media/video/cx18/cx18-driver.h @@ -63,8 +63,8 @@ # error "This driver requires kernel PCI support." #endif -/* Default delay to throttle mmio access to the CX23418 so it doesn't choke */ -#define CX18_DEFAULT_MMIO_NDELAY 31 /* 30.3 ns = 1 PCI clock(s) / 33 MHz */ +/* Default delay to throttle mmio access to the CX23418 */ +#define CX18_DEFAULT_MMIO_NDELAY 0 /* 0 ns = 0 PCI clock(s) / 33 MHz */ #define CX18_MEM_OFFSET 0x00000000 #define CX18_MEM_SIZE 0x04000000 -- cgit v0.10.2 From d654dca7bca79dd3981267e398b6a7df34d3d047 Mon Sep 17 00:00:00 2001 From: Jean-Francois Moine Date: Sat, 6 Sep 2008 04:18:48 -0300 Subject: V4L/DVB (8927): gspca: PAC 207 webcam 093a:2476 added. Signed-off-by: Jean-Francois Moine Signed-off-by: Mauro Carvalho Chehab diff --git a/Documentation/video4linux/gspca.txt b/Documentation/video4linux/gspca.txt index 9a3e4d7..89fed5c 100644 --- a/Documentation/video4linux/gspca.txt +++ b/Documentation/video4linux/gspca.txt @@ -181,6 +181,7 @@ pac207 093a:2468 PAC207 pac207 093a:2470 Genius GF112 pac207 093a:2471 Genius VideoCam ge111 pac207 093a:2472 Genius VideoCam ge110 +pac207 093a:2476 Genius e-Messenger 112 pac7311 093a:2600 PAC7311 Typhoon pac7311 093a:2601 Philips SPC 610 NC pac7311 093a:2603 PAC7312 diff --git a/drivers/media/video/gspca/pac207.c b/drivers/media/video/gspca/pac207.c index 83b5f74..34e923d 100644 --- a/drivers/media/video/gspca/pac207.c +++ b/drivers/media/video/gspca/pac207.c @@ -534,6 +534,7 @@ static const __devinitdata struct usb_device_id device_table[] = { {USB_DEVICE(0x093a, 0x2470)}, {USB_DEVICE(0x093a, 0x2471)}, {USB_DEVICE(0x093a, 0x2472)}, + {USB_DEVICE(0x093a, 0x2476)}, {USB_DEVICE(0x2001, 0xf115)}, {} }; -- cgit v0.10.2 From 3371bcc328c7345fe8d69b7a828890b62fb21744 Mon Sep 17 00:00:00 2001 From: Jean-Francois Moine Date: Sat, 6 Sep 2008 04:21:08 -0300 Subject: V4L/DVB (8928): gspca: Version change to 2.3.0. Signed-off-by: Jean-Francois Moine Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/gspca/gspca.c b/drivers/media/video/gspca/gspca.c index 496d58d..ce54985 100644 --- a/drivers/media/video/gspca/gspca.c +++ b/drivers/media/video/gspca/gspca.c @@ -43,7 +43,7 @@ MODULE_AUTHOR("Jean-Francois Moine "); MODULE_DESCRIPTION("GSPCA USB Camera Driver"); MODULE_LICENSE("GPL"); -#define DRIVER_VERSION_NUMBER KERNEL_VERSION(2, 2, 0) +#define DRIVER_VERSION_NUMBER KERNEL_VERSION(2, 3, 0) static int video_nr = -1; -- cgit v0.10.2 From 7b537391dde35d7f412417a95f02f89af08dd2d3 Mon Sep 17 00:00:00 2001 From: Jean-Francois Moine Date: Sun, 7 Sep 2008 11:56:49 -0300 Subject: V4L/DVB (8929): gspca: sonixj webcam 0458:702e added. Signed-off-by: Jean-Francois Moine Signed-off-by: Mauro Carvalho Chehab diff --git a/Documentation/video4linux/gspca.txt b/Documentation/video4linux/gspca.txt index 89fed5c..308ce4e 100644 --- a/Documentation/video4linux/gspca.txt +++ b/Documentation/video4linux/gspca.txt @@ -42,6 +42,7 @@ zc3xx 0458:7007 Genius VideoCam V2 zc3xx 0458:700c Genius VideoCam V3 zc3xx 0458:700f Genius VideoCam Web V2 sonixj 0458:7025 Genius Eye 311Q +sonixj 0458:702e Genius Slim 310 NB sonixj 045e:00f5 MicroSoft VX3000 sonixj 045e:00f7 MicroSoft VX1000 ov519 045e:028c Micro$oft xbox cam diff --git a/drivers/media/video/gspca/sonixj.c b/drivers/media/video/gspca/sonixj.c index 572b0f3..cd961ca 100644 --- a/drivers/media/video/gspca/sonixj.c +++ b/drivers/media/video/gspca/sonixj.c @@ -1567,6 +1567,7 @@ static const struct sd_desc sd_desc = { static const __devinitdata struct usb_device_id device_table[] = { #if !defined CONFIG_USB_SN9C102 && !defined CONFIG_USB_SN9C102_MODULE {USB_DEVICE(0x0458, 0x7025), BSI(SN9C120, MI0360, 0x5d)}, + {USB_DEVICE(0x0458, 0x702e), BSI(SN9C120, OV7660, 0x21)}, {USB_DEVICE(0x045e, 0x00f5), BSI(SN9C105, OV7660, 0x21)}, {USB_DEVICE(0x045e, 0x00f7), BSI(SN9C105, OV7660, 0x21)}, {USB_DEVICE(0x0471, 0x0327), BSI(SN9C105, MI0360, 0x5d)}, -- cgit v0.10.2 From 51977a8daab6775b91986b566056eb2a2f10202d Mon Sep 17 00:00:00 2001 From: Jean-Francois Moine Date: Mon, 8 Sep 2008 03:22:42 -0300 Subject: V4L/DVB (8930): gspca: The image transfer by bulk is started by the subdrivers. Signed-off-by: Jean-Francois Moine Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/gspca/gspca.c b/drivers/media/video/gspca/gspca.c index ce54985..58761d9 100644 --- a/drivers/media/video/gspca/gspca.c +++ b/drivers/media/video/gspca/gspca.c @@ -185,7 +185,7 @@ static void bulk_irq(struct urb *urb { struct gspca_dev *gspca_dev = (struct gspca_dev *) urb->context; struct gspca_frame *frame; - int j, ret; + int j; PDEBUG(D_PACK, "bulk irq"); if (!gspca_dev->streaming) @@ -212,11 +212,6 @@ static void bulk_irq(struct urb *urb urb->transfer_buffer, urb->actual_length); } - /* resubmit the URB */ - urb->status = 0; - ret = usb_submit_urb(urb, GFP_ATOMIC); - if (ret < 0) - PDEBUG(D_ERR|D_PACK, "usb_submit_urb() ret %d", ret); } /* @@ -502,13 +497,14 @@ static int create_urbs(struct gspca_dev *gspca_dev, PDEBUG(D_STREAM, "isoc %d pkts size %d = bsize:%d", npkt, psize, bsize); + nurbs = DEF_NURBS; } else { npkt = 0; bsize = psize; PDEBUG(D_STREAM, "bulk bsize:%d", bsize); + nurbs = 1; } - nurbs = DEF_NURBS; gspca_dev->nurbs = nurbs; for (n = 0; n < nurbs; n++) { urb = usb_alloc_urb(npkt, GFP_KERNEL); @@ -583,6 +579,10 @@ static int gspca_init_transfer(struct gspca_dev *gspca_dev) gspca_dev->streaming = 1; atomic_set(&gspca_dev->nevent, 0); + /* start the bulk transfer is done by the subdriver */ + if (gspca_dev->bulk) + break; + /* submit the URBs */ for (n = 0; n < gspca_dev->nurbs; n++) { ret = usb_submit_urb(gspca_dev->urb[n], GFP_KERNEL); -- cgit v0.10.2 From 6c86274fcdf4b3893ee22c1e39ddfb5b05bf0362 Mon Sep 17 00:00:00 2001 From: Jean-Francois Moine Date: Mon, 8 Sep 2008 04:57:26 -0300 Subject: V4L/DVB (8931): gspca: Vflip added for sonixj - ov7630. Signed-off-by: Jean-Francois Moine Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/gspca/sonixj.c b/drivers/media/video/gspca/sonixj.c index cd961ca..1d6f2ee 100644 --- a/drivers/media/video/gspca/sonixj.c +++ b/drivers/media/video/gspca/sonixj.c @@ -39,6 +39,7 @@ struct sd { unsigned char contrast; unsigned char colors; unsigned char autogain; + __u8 vflip; /* ov7630 only */ signed char ag_cnt; #define AG_CNT_START 13 @@ -70,6 +71,8 @@ static int sd_setcolors(struct gspca_dev *gspca_dev, __s32 val); static int sd_getcolors(struct gspca_dev *gspca_dev, __s32 *val); static int sd_setautogain(struct gspca_dev *gspca_dev, __s32 val); static int sd_getautogain(struct gspca_dev *gspca_dev, __s32 *val); +static int sd_setvflip(struct gspca_dev *gspca_dev, __s32 val); +static int sd_getvflip(struct gspca_dev *gspca_dev, __s32 *val); static struct ctrl sd_ctrls[] = { { @@ -131,6 +134,22 @@ static struct ctrl sd_ctrls[] = { .set = sd_setautogain, .get = sd_getautogain, }, +/* ov7630 only */ +#define VFLIP_IDX 4 + { + { + .id = V4L2_CID_VFLIP, + .type = V4L2_CTRL_TYPE_BOOLEAN, + .name = "Vflip", + .minimum = 0, + .maximum = 1, + .step = 1, +#define VFLIP_DEF 0 + .default_value = VFLIP_DEF, + }, + .set = sd_setvflip, + .get = sd_getvflip, + }, }; static struct v4l2_pix_format vga_mode[] = { @@ -434,7 +453,8 @@ static const __u8 ov7630_sensor_init[][8] = { {0xa1, 0x21, 0x12, 0x48, 0x00, 0x00, 0x00, 0x10}, {0xa1, 0x21, 0x12, 0x48, 0x00, 0x00, 0x00, 0x10}, /*fixme: + 0x12, 0x04*/ - {0xa1, 0x21, 0x75, 0x82, 0x00, 0x00, 0x00, 0x10}, +/* {0xa1, 0x21, 0x75, 0x82, 0x00, 0x00, 0x00, 0x10}, * COMN + * set by setvflip */ {0xa1, 0x21, 0x10, 0x32, 0x00, 0x00, 0x00, 0x10}, {0xa1, 0x21, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10}, {0xb1, 0x21, 0x01, 0x80, 0x80, 0x00, 0x00, 0x10}, @@ -949,6 +969,8 @@ static int sd_config(struct gspca_dev *gspca_dev, gspca_dev->ctrl_dis = (1 << AUTOGAIN_IDX); break; } + if (sd->sensor != SENSOR_OV7630) + gspca_dev->ctrl_dis |= (1 << VFLIP_IDX); return 0; } @@ -1172,6 +1194,14 @@ static void setautogain(struct gspca_dev *gspca_dev) sd->ag_cnt = -1; } +static void setvflip(struct sd *sd) +{ + if (sd->sensor != SENSOR_OV7630) + return; + i2c_w1(&sd->gspca_dev, 0x75, /* COMN */ + sd->vflip ? 0x82 : 0x02); +} + /* -- start the camera -- */ static void sd_start(struct gspca_dev *gspca_dev) { @@ -1263,6 +1293,7 @@ static void sd_start(struct gspca_dev *gspca_dev) break; case SENSOR_OV7630: ov7630_InitSensor(gspca_dev); + setvflip(sd); reg17 = 0xe2; reg1 = 0x44; break; @@ -1546,6 +1577,23 @@ static int sd_getautogain(struct gspca_dev *gspca_dev, __s32 *val) return 0; } +static int sd_setvflip(struct gspca_dev *gspca_dev, __s32 val) +{ + struct sd *sd = (struct sd *) gspca_dev; + + sd->vflip = val; + setvflip(sd); + return 0; +} + +static int sd_getvflip(struct gspca_dev *gspca_dev, __s32 *val) +{ + struct sd *sd = (struct sd *) gspca_dev; + + *val = sd->vflip; + return 0; +} + /* sub-driver description */ static const struct sd_desc sd_desc = { .name = MODULE_NAME, -- cgit v0.10.2 From a50f4a444a14a116e2eb077e01c2eaf58ddb7c6a Mon Sep 17 00:00:00 2001 From: Douglas Schilling Landgraf Date: Mon, 8 Sep 2008 03:23:55 -0300 Subject: V4L/DVB (8936): em28xx-cards: Add vendor/product id for EM2820_BOARD_PROLINK_PLAYTV_USB2 Added vendor/product id for EM2820_BOARD_PROLINK_PLAYTV_USB2 Signed-off-by: Douglas Schilling Landgraf Signed-off-by: Mauro Carvalho Chehab diff --git a/Documentation/video4linux/CARDLIST.em28xx b/Documentation/video4linux/CARDLIST.em28xx index 53449cb..187cc48 100644 --- a/Documentation/video4linux/CARDLIST.em28xx +++ b/Documentation/video4linux/CARDLIST.em28xx @@ -1,5 +1,5 @@ 0 -> Unknown EM2800 video grabber (em2800) [eb1a:2800] - 1 -> Unknown EM2750/28xx video grabber (em2820/em2840) [eb1a:2820,eb1a:2821,eb1a:2860,eb1a:2861,eb1a:2870,eb1a:2881,eb1a:2883] + 1 -> Unknown EM2750/28xx video grabber (em2820/em2840) [eb1a:2820,eb1a:2860,eb1a:2861,eb1a:2870,eb1a:2881,eb1a:2883] 2 -> Terratec Cinergy 250 USB (em2820/em2840) [0ccd:0036] 3 -> Pinnacle PCTV USB 2 (em2820/em2840) [2304:0208] 4 -> Hauppauge WinTV USB 2 (em2820/em2840) [2040:4200,2040:4201] @@ -12,7 +12,7 @@ 11 -> Terratec Hybrid XS (em2880) [0ccd:0042] 12 -> Kworld PVR TV 2800 RF (em2820/em2840) 13 -> Terratec Prodigy XS (em2880) [0ccd:0047] - 14 -> Pixelview Prolink PlayTV USB 2.0 (em2820/em2840) + 14 -> Pixelview Prolink PlayTV USB 2.0 (em2820/em2840) [eb1a:2821] 15 -> V-Gear PocketTV (em2800) 16 -> Hauppauge WinTV HVR 950 (em2883) [2040:6513,2040:6517,2040:651b,2040:651f] 17 -> Pinnacle PCTV HD Pro Stick (em2880) [2304:0227] diff --git a/drivers/media/video/em28xx/em28xx-cards.c b/drivers/media/video/em28xx/em28xx-cards.c index de943cf..01804fa 100644 --- a/drivers/media/video/em28xx/em28xx-cards.c +++ b/drivers/media/video/em28xx/em28xx-cards.c @@ -1101,7 +1101,7 @@ struct usb_device_id em28xx_id_table [] = { { USB_DEVICE(0xeb1a, 0x2820), .driver_info = EM2820_BOARD_UNKNOWN }, { USB_DEVICE(0xeb1a, 0x2821), - .driver_info = EM2820_BOARD_UNKNOWN }, + .driver_info = EM2820_BOARD_PROLINK_PLAYTV_USB2 }, { USB_DEVICE(0xeb1a, 0x2860), .driver_info = EM2820_BOARD_UNKNOWN }, { USB_DEVICE(0xeb1a, 0x2861), -- cgit v0.10.2 From f2a01a0027b29f682c3833d582e2827a4690f661 Mon Sep 17 00:00:00 2001 From: Douglas Schilling Landgraf Date: Mon, 8 Sep 2008 03:27:20 -0300 Subject: V4L/DVB (8937): em28xx: Fix and add some validations Fixed and Added some validations Signed-off-by: Douglas Schilling Landgraf Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/em28xx/em28xx-i2c.c b/drivers/media/video/em28xx/em28xx-i2c.c index 2989a65..3bab56b 100644 --- a/drivers/media/video/em28xx/em28xx-i2c.c +++ b/drivers/media/video/em28xx/em28xx-i2c.c @@ -336,8 +336,11 @@ static int em28xx_i2c_eeprom(struct em28xx *dev, unsigned char *eedata, int len) /* Check if board has eeprom */ err = i2c_master_recv(&dev->i2c_client, &buf, 0); - if (err < 0) - return -1; + if (err < 0) { + em28xx_errdev("%s: i2c_master_recv failed! err [%d]\n", + __func__, err); + return err; + } buf = 0; @@ -345,7 +348,7 @@ static int em28xx_i2c_eeprom(struct em28xx *dev, unsigned char *eedata, int len) if (err != 1) { printk(KERN_INFO "%s: Huh, no eeprom present (err=%d)?\n", dev->name, err); - return -1; + return err; } while (size > 0) { if (size > 16) @@ -358,7 +361,7 @@ static int em28xx_i2c_eeprom(struct em28xx *dev, unsigned char *eedata, int len) printk(KERN_WARNING "%s: i2c eeprom read error (err=%d)\n", dev->name, err); - return -1; + return err; } size -= block; p += block; @@ -586,18 +589,31 @@ void em28xx_i2c_call_clients(struct em28xx *dev, unsigned int cmd, void *arg) */ int em28xx_i2c_register(struct em28xx *dev) { + int retval; + BUG_ON(!dev->em28xx_write_regs || !dev->em28xx_read_reg); BUG_ON(!dev->em28xx_write_regs_req || !dev->em28xx_read_reg_req); dev->i2c_adap = em28xx_adap_template; dev->i2c_adap.dev.parent = &dev->udev->dev; strcpy(dev->i2c_adap.name, dev->name); dev->i2c_adap.algo_data = dev; - i2c_add_adapter(&dev->i2c_adap); + + retval = i2c_add_adapter(&dev->i2c_adap); + if (retval < 0) { + em28xx_errdev("%s: i2c_add_adapter failed! retval [%d]\n", + __func__, retval); + return retval; + } dev->i2c_client = em28xx_client_template; dev->i2c_client.adapter = &dev->i2c_adap; - em28xx_i2c_eeprom(dev, dev->eedata, sizeof(dev->eedata)); + retval = em28xx_i2c_eeprom(dev, dev->eedata, sizeof(dev->eedata)); + if (retval < 0) { + em28xx_errdev("%s: em28xx_i2_eeprom failed! retval [%d]\n", + __func__, retval); + return retval; + } if (i2c_scan) em28xx_do_i2c_scan(dev); diff --git a/drivers/media/video/em28xx/em28xx-video.c b/drivers/media/video/em28xx/em28xx-video.c index 600b340..50d2c7a 100644 --- a/drivers/media/video/em28xx/em28xx-video.c +++ b/drivers/media/video/em28xx/em28xx-video.c @@ -513,10 +513,17 @@ static struct videobuf_queue_ops em28xx_video_qops = { */ static int em28xx_config(struct em28xx *dev) { + int retval; /* Sets I2C speed to 100 KHz */ - if (!dev->is_em2800) - em28xx_write_regs_req(dev, 0x00, 0x06, "\x40", 1); + if (!dev->is_em2800) { + retval = em28xx_write_regs_req(dev, 0x00, 0x06, "\x40", 1); + if (retval < 0) { + em28xx_errdev("%s: em28xx_write_regs_req failed! retval [%d]\n", + __func__, retval); + return retval; + } + } /* enable vbi capturing */ @@ -1953,13 +1960,23 @@ static int em28xx_init_dev(struct em28xx **devhandle, struct usb_device *udev, } /* register i2c bus */ - em28xx_i2c_register(dev); + errCode = em28xx_i2c_register(dev); + if (errCode < 0) { + em28xx_errdev("%s: em28xx_i2c_register - errCode [%d]!\n", + __func__, errCode); + return errCode; + } /* Do board specific init and eeprom reading */ em28xx_card_setup(dev); /* Configure audio */ - em28xx_audio_analog_set(dev); + errCode = em28xx_audio_analog_set(dev); + if (errCode < 0) { + em28xx_errdev("%s: em28xx_audio_analog_set - errCode [%d]!\n", + __func__, errCode); + return errCode; + } /* configure the device */ em28xx_config_i2c(dev); @@ -1979,6 +1996,11 @@ static int em28xx_init_dev(struct em28xx **devhandle, struct usb_device *udev, dev->ctl_input = 2; errCode = em28xx_config(dev); + if (errCode < 0) { + em28xx_errdev("%s: em28xx_config - errCode [%d]!\n", + __func__, errCode); + return errCode; + } list_add_tail(&dev->devlist, &em28xx_devlist); @@ -2031,9 +2053,20 @@ static int em28xx_init_dev(struct em28xx **devhandle, struct usb_device *udev, if (dev->has_msp34xx) { /* Send a reset to other chips via gpio */ - em28xx_write_regs_req(dev, 0x00, 0x08, "\xf7", 1); + errCode = em28xx_write_regs_req(dev, 0x00, 0x08, "\xf7", 1); + if (errCode < 0) { + em28xx_errdev("%s: em28xx_write_regs_req - msp34xx(1) failed! errCode [%d]\n", + __func__, errCode); + return errCode; + } msleep(3); - em28xx_write_regs_req(dev, 0x00, 0x08, "\xff", 1); + + errCode = em28xx_write_regs_req(dev, 0x00, 0x08, "\xff", 1); + if (errCode < 0) { + em28xx_errdev("%s: em28xx_write_regs_req - msp34xx(2) failed! errCode [%d]\n", + __func__, errCode); + return errCode; + } msleep(3); } -- cgit v0.10.2 From 2796073a3d9cc4f610f1e68b3f62c197d86577ab Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Sat, 6 Sep 2008 14:02:43 -0300 Subject: V4L/DVB (8939): cx18: fix sparse warnings Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/cx18/cx18-driver.c b/drivers/media/video/cx18/cx18-driver.c index 202b281..4de7b50 100644 --- a/drivers/media/video/cx18/cx18-driver.c +++ b/drivers/media/video/cx18/cx18-driver.c @@ -82,7 +82,7 @@ static int mmio_ndelay[CX18_MAX_CARDS] = { -1, -1, -1, -1, -1, -1, -1, -1, static unsigned cardtype_c = 1; static unsigned tuner_c = 1; static unsigned radio_c = 1; -static int mmio_ndelay_c = 1; +static unsigned mmio_ndelay_c = 1; static char pal[] = "--"; static char secam[] = "--"; static char ntsc[] = "-"; diff --git a/drivers/media/video/cx18/cx18-io.c b/drivers/media/video/cx18/cx18-io.c index 5d07b0f..55d1df9 100644 --- a/drivers/media/video/cx18/cx18-io.c +++ b/drivers/media/video/cx18/cx18-io.c @@ -27,7 +27,7 @@ void cx18_memcpy_fromio(struct cx18 *cx, void *to, const void __iomem *from, unsigned int len) { - const u8 *src = from; + const u8 __iomem *src = from; u8 *dst = to; /* Align reads on the CX23418's addresses */ @@ -61,7 +61,7 @@ void cx18_memcpy_fromio(struct cx18 *cx, void *to, void cx18_memset_io(struct cx18 *cx, void __iomem *addr, int val, size_t count) { - u8 *dst = addr; + u8 __iomem *dst = addr; u16 val2 = val | (val << 8); u32 val4 = val2 | (val2 << 16); -- cgit v0.10.2 From 6bd6dff6318397b1127dd256b65dde007306b8ea Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Sat, 6 Sep 2008 15:26:44 -0300 Subject: V4L/DVB (8940): saa7115: fix saa7111(a) support The saa7111 support in saa7115.c was missing some features and did not properly take some of the differences into account. With this patch saa7115 can be used in the mxb driver instead of saa7111.c. Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/saa7115.c b/drivers/media/video/saa7115.c index ad733ca..4ed7d65 100644 --- a/drivers/media/video/saa7115.c +++ b/drivers/media/video/saa7115.c @@ -1309,10 +1309,13 @@ static int saa7115_command(struct i2c_client *client, unsigned int cmd, void *ar case VIDIOC_INT_S_VIDEO_ROUTING: { struct v4l2_routing *route = arg; + u32 input = route->input; + u8 mask = (state->ident == V4L2_IDENT_SAA7111) ? 0xf8 : 0xf0; v4l_dbg(1, debug, client, "decoder set input %d output %d\n", route->input, route->output); - /* saa7113 does not have these inputs */ - if (state->ident == V4L2_IDENT_SAA7113 && + /* saa7111/3 does not have these inputs */ + if ((state->ident == V4L2_IDENT_SAA7113 || + state->ident == V4L2_IDENT_SAA7111) && (route->input == SAA7115_COMPOSITE4 || route->input == SAA7115_COMPOSITE5)) { return -EINVAL; @@ -1327,10 +1330,23 @@ static int saa7115_command(struct i2c_client *client, unsigned int cmd, void *ar (route->input >= SAA7115_SVIDEO0) ? "S-Video" : "Composite", (route->output == SAA7115_IPORT_ON) ? "iport on" : "iport off"); state->input = route->input; + /* saa7111 has slightly different input numbering */ + if (state->ident == V4L2_IDENT_SAA7111) { + if (input >= SAA7115_COMPOSITE4) + input -= 2; + /* saa7111 specific */ + saa711x_write(client, R_10_CHROMA_CNTL_2, + (saa711x_read(client, R_10_CHROMA_CNTL_2) & 0x3f) | + ((route->output & 0xc0) ^ 0x40)); + saa711x_write(client, R_13_RT_X_PORT_OUT_CNTL, + (saa711x_read(client, R_13_RT_X_PORT_OUT_CNTL) & 0xf0) | + ((route->output & 2) ? 0x0a : 0)); + } + /* select mode */ saa711x_write(client, R_02_INPUT_CNTL_1, - (saa711x_read(client, R_02_INPUT_CNTL_1) & 0xf0) | - state->input); + (saa711x_read(client, R_02_INPUT_CNTL_1) & mask) | + input); /* bypass chrominance trap for S-Video modes */ saa711x_write(client, R_09_LUMA_CNTL, @@ -1384,6 +1400,13 @@ static int saa7115_command(struct i2c_client *client, unsigned int cmd, void *ar saa711x_writeregs(client, saa7115_cfg_reset_scaler); break; + case VIDIOC_INT_S_GPIO: + if (state->ident != V4L2_IDENT_SAA7111) + return -EINVAL; + saa711x_write(client, 0x11, (saa711x_read(client, 0x11) & 0x7f) | + (*(u32 *)arg ? 0x80 : 0)); + break; + case VIDIOC_INT_G_VBI_DATA: { struct v4l2_sliced_vbi_data *data = arg; @@ -1539,7 +1562,8 @@ static int saa7115_probe(struct i2c_client *client, state->crystal_freq = SAA7115_FREQ_32_11_MHZ; saa711x_writeregs(client, saa7115_init_auto_input); } - saa711x_writeregs(client, saa7115_init_misc); + if (state->ident != V4L2_IDENT_SAA7111) + saa711x_writeregs(client, saa7115_init_misc); saa711x_set_v4lstd(client, V4L2_STD_NTSC); v4l_dbg(1, debug, client, "status: (1E) 0x%02x, (1F) 0x%02x\n", diff --git a/include/media/saa7115.h b/include/media/saa7115.h index f677dfb..bab2127 100644 --- a/include/media/saa7115.h +++ b/include/media/saa7115.h @@ -1,5 +1,5 @@ /* - saa7115.h - definition for saa7113/4/5 inputs and frequency flags + saa7115.h - definition for saa7111/3/4/5 inputs and frequency flags Copyright (C) 2006 Hans Verkuil (hverkuil@xs4all.nl) @@ -21,13 +21,13 @@ #ifndef _SAA7115_H_ #define _SAA7115_H_ -/* SAA7113/4/5 HW inputs */ +/* SAA7111/3/4/5 HW inputs */ #define SAA7115_COMPOSITE0 0 #define SAA7115_COMPOSITE1 1 #define SAA7115_COMPOSITE2 2 #define SAA7115_COMPOSITE3 3 -#define SAA7115_COMPOSITE4 4 /* not available for the saa7113 */ -#define SAA7115_COMPOSITE5 5 /* not available for the saa7113 */ +#define SAA7115_COMPOSITE4 4 /* not available for the saa7111/3 */ +#define SAA7115_COMPOSITE5 5 /* not available for the saa7111/3 */ #define SAA7115_SVIDEO0 6 #define SAA7115_SVIDEO1 7 #define SAA7115_SVIDEO2 8 @@ -42,8 +42,15 @@ #define SAA7115_FREQ_FL_CGCDIV (1 << 1) /* SA 3A[6], CGCDIV, SAA7115 only */ #define SAA7115_FREQ_FL_APLL (1 << 2) /* SA 3A[3], APLL, SAA7114/5 only */ -#define SAA7115_IPORT_ON 1 -#define SAA7115_IPORT_OFF 0 +#define SAA7115_IPORT_ON 1 +#define SAA7115_IPORT_OFF 0 + +/* SAA7111 specific output flags */ +#define SAA7111_VBI_BYPASS 2 +#define SAA7111_FMT_YUV422 0x00 +#define SAA7111_FMT_RGB 0x40 +#define SAA7111_FMT_CCIR 0x80 +#define SAA7111_FMT_YUV411 0xc0 #endif diff --git a/include/media/v4l2-common.h b/include/media/v4l2-common.h index 0c195cc..2f8719a 100644 --- a/include/media/v4l2-common.h +++ b/include/media/v4l2-common.h @@ -225,18 +225,22 @@ struct v4l2_crystal_freq { An extra flags field allows device specific configuration regarding clock frequency dividers, etc. If not used, then set flags to 0. If the frequency is not supported, then -EINVAL is returned. */ -#define VIDIOC_INT_S_CRYSTAL_FREQ _IOW ('d', 113, struct v4l2_crystal_freq) +#define VIDIOC_INT_S_CRYSTAL_FREQ _IOW('d', 113, struct v4l2_crystal_freq) /* Initialize the sensor registors to some sort of reasonable default values. */ -#define VIDIOC_INT_INIT _IOW ('d', 114, u32) +#define VIDIOC_INT_INIT _IOW('d', 114, u32) /* Set v4l2_std_id for video OUTPUT devices. This is ignored by video input devices. */ -#define VIDIOC_INT_S_STD_OUTPUT _IOW ('d', 115, v4l2_std_id) +#define VIDIOC_INT_S_STD_OUTPUT _IOW('d', 115, v4l2_std_id) /* Get v4l2_std_id for video OUTPUT devices. This is ignored by video input devices. */ -#define VIDIOC_INT_G_STD_OUTPUT _IOW ('d', 116, v4l2_std_id) +#define VIDIOC_INT_G_STD_OUTPUT _IOW('d', 116, v4l2_std_id) + +/* Set GPIO pins. Very simple right now, might need to be extended with + a v4l2_gpio struct if a direction is also needed. */ +#define VIDIOC_INT_S_GPIO _IOW('d', 117, u32) #endif /* V4L2_COMMON_H_ */ -- cgit v0.10.2 From 707ecf4603a9439dcf409e13c5e9ed4e164ddfff Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Sat, 6 Sep 2008 15:40:25 -0300 Subject: V4L/DVB (8941): mxb/tda9840: cleanups, use module saa7115 instead of saa7111. Cleanup tda9840 and use a v4l2 API to get the tuner subchannels. Do some cleanups in mxb and switch to saa7115 instead of the saa7111 module. Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig index 7f7482bf..e28e292 100644 --- a/drivers/media/video/Kconfig +++ b/drivers/media/video/Kconfig @@ -691,7 +691,7 @@ config VIDEO_MXB depends on PCI && VIDEO_V4L1 && I2C select VIDEO_SAA7146_VV select VIDEO_TUNER - select VIDEO_SAA7111 if VIDEO_HELPER_CHIPS_AUTO + select VIDEO_SAA7115 if VIDEO_HELPER_CHIPS_AUTO select VIDEO_TDA9840 if VIDEO_HELPER_CHIPS_AUTO select VIDEO_TEA6415C if VIDEO_HELPER_CHIPS_AUTO select VIDEO_TEA6420 if VIDEO_HELPER_CHIPS_AUTO diff --git a/drivers/media/video/mxb.c b/drivers/media/video/mxb.c index 7c9820c..621d174 100644 --- a/drivers/media/video/mxb.c +++ b/drivers/media/video/mxb.c @@ -27,6 +27,7 @@ #include #include #include +#include #include "mxb.h" #include "tea6415c.h" @@ -122,6 +123,8 @@ static struct saa7146_extension_ioctls ioctls[] = { { VIDIOC_S_FREQUENCY, SAA7146_EXCLUSIVE }, { VIDIOC_G_AUDIO, SAA7146_EXCLUSIVE }, { VIDIOC_S_AUDIO, SAA7146_EXCLUSIVE }, + { VIDIOC_DBG_G_REGISTER, SAA7146_EXCLUSIVE }, + { VIDIOC_DBG_S_REGISTER, SAA7146_EXCLUSIVE }, { MXB_S_AUDIO_CD, SAA7146_EXCLUSIVE }, /* custom control */ { MXB_S_AUDIO_LINE, SAA7146_EXCLUSIVE }, /* custom control */ { 0, 0 } @@ -154,20 +157,20 @@ static int mxb_check_clients(struct device *dev, void *data) struct mxb* mxb = data; struct i2c_client *client = i2c_verify_client(dev); - if( !client ) + if (!client) return 0; - if( I2C_ADDR_TEA6420_1 == client->addr ) + if (I2C_ADDR_TEA6420_1 == client->addr) mxb->tea6420_1 = client; - if( I2C_ADDR_TEA6420_2 == client->addr ) + if (I2C_ADDR_TEA6420_2 == client->addr) mxb->tea6420_2 = client; - if( I2C_TEA6415C_2 == client->addr ) + if (I2C_TEA6415C_2 == client->addr) mxb->tea6415c = client; - if( I2C_ADDR_TDA9840 == client->addr ) + if (I2C_ADDR_TDA9840 == client->addr) mxb->tda9840 = client; - if( I2C_SAA7111 == client->addr ) + if (I2C_SAA7111 == client->addr) mxb->saa7111a = client; - if( 0x60 == client->addr ) + if (0x60 == client->addr) mxb->tuner = client; return 0; @@ -178,23 +181,28 @@ static int mxb_probe(struct saa7146_dev* dev) struct mxb* mxb = NULL; int result; - if ((result = request_module("saa7111")) < 0) { + result = request_module("saa7115"); + if (result < 0) { printk("mxb: saa7111 i2c module not available.\n"); return -ENODEV; } - if ((result = request_module("tea6420")) < 0) { + result = request_module("tea6420"); + if (result < 0) { printk("mxb: tea6420 i2c module not available.\n"); return -ENODEV; } - if ((result = request_module("tea6415c")) < 0) { + result = request_module("tea6415c"); + if (result < 0) { printk("mxb: tea6415c i2c module not available.\n"); return -ENODEV; } - if ((result = request_module("tda9840")) < 0) { + result = request_module("tda9840"); + if (result < 0) { printk("mxb: tda9840 i2c module not available.\n"); return -ENODEV; } - if ((result = request_module("tuner")) < 0) { + result = request_module("tuner"); + if (result < 0) { printk("mxb: tuner i2c module not available.\n"); return -ENODEV; } @@ -293,37 +301,6 @@ static struct { {-1, { 0} } }; -static const unsigned char mxb_saa7111_init[] = { - 0x00, 0x00, /* 00 - ID byte */ - 0x01, 0x00, /* 01 - reserved */ - - /*front end */ - 0x02, 0xd8, /* 02 - FUSE=x, GUDL=x, MODE=x */ - 0x03, 0x23, /* 03 - HLNRS=0, VBSL=1, WPOFF=0, HOLDG=0, GAFIX=0, GAI1=256, GAI2=256 */ - 0x04, 0x00, /* 04 - GAI1=256 */ - 0x05, 0x00, /* 05 - GAI2=256 */ - - /* decoder */ - 0x06, 0xf0, /* 06 - HSB at xx(50Hz) / xx(60Hz) pixels after end of last line */ - 0x07, 0x30, /* 07 - HSS at xx(50Hz) / xx(60Hz) pixels after end of last line */ - 0x08, 0xa8, /* 08 - AUFD=x, FSEL=x, EXFIL=x, VTRC=x, HPLL=x, VNOI=x */ - 0x09, 0x02, /* 09 - BYPS=x, PREF=x, BPSS=x, VBLB=x, UPTCV=x, APER=x */ - 0x0a, 0x80, /* 0a - BRIG=128 */ - 0x0b, 0x47, /* 0b - CONT=1.109 */ - 0x0c, 0x40, /* 0c - SATN=1.0 */ - 0x0d, 0x00, /* 0d - HUE=0 */ - 0x0e, 0x01, /* 0e - CDTO=0, CSTD=0, DCCF=0, FCTC=0, CHBW=1 */ - 0x0f, 0x00, /* 0f - reserved */ - 0x10, 0xd0, /* 10 - OFTS=x, HDEL=x, VRLN=x, YDEL=x */ - 0x11, 0x8c, /* 11 - GPSW=x, CM99=x, FECO=x, COMPO=x, OEYC=1, OEHV=1, VIPB=0, COLO=0 */ - 0x12, 0x80, /* 12 - xx output control 2 */ - 0x13, 0x30, /* 13 - xx output control 3 */ - 0x14, 0x00, /* 14 - reserved */ - 0x15, 0x15, /* 15 - VBI */ - 0x16, 0x04, /* 16 - VBI */ - 0x17, 0x00, /* 17 - VBI */ -}; - /* bring hardware to a sane state. this has to be done, just in case someone wants to capture from this device before it has been properly initialized. the capture engine would badly fail, because no valid signal arrives on the @@ -331,37 +308,29 @@ static const unsigned char mxb_saa7111_init[] = { static int mxb_init_done(struct saa7146_dev* dev) { struct mxb* mxb = (struct mxb*)dev->ext_priv; - struct video_decoder_init init; struct i2c_msg msg; struct tuner_setup tun_setup; v4l2_std_id std = V4L2_STD_PAL_BG; + struct v4l2_routing route; int i = 0, err = 0; struct tea6415c_multiplex vm; /* select video mode in saa7111a */ - i = VIDEO_MODE_PAL; /* fixme: currently pointless: gets overwritten by configuration below */ - mxb->saa7111a->driver->command(mxb->saa7111a,DECODER_SET_NORM, &i); - - /* write configuration to saa7111a */ - init.data = mxb_saa7111_init; - init.len = sizeof(mxb_saa7111_init); - mxb->saa7111a->driver->command(mxb->saa7111a,DECODER_INIT, &init); + mxb->saa7111a->driver->command(mxb->saa7111a, VIDIOC_S_STD, &std); /* select tuner-output on saa7111a */ i = 0; - mxb->saa7111a->driver->command(mxb->saa7111a,DECODER_SET_INPUT, &i); - - /* enable vbi bypass */ - i = 1; - mxb->saa7111a->driver->command(mxb->saa7111a,DECODER_SET_VBI_BYPASS, &i); + route.input = SAA7115_COMPOSITE0; + route.output = SAA7111_FMT_CCIR | SAA7111_VBI_BYPASS; + mxb->saa7111a->driver->command(mxb->saa7111a, VIDIOC_INT_S_VIDEO_ROUTING, &route); /* select a tuner type */ tun_setup.mode_mask = T_ANALOG_TV; tun_setup.addr = ADDR_UNSET; tun_setup.type = TUNER_PHILIPS_PAL; - mxb->tuner->driver->command(mxb->tuner,TUNER_SET_TYPE_ADDR, &tun_setup); + mxb->tuner->driver->command(mxb->tuner, TUNER_SET_TYPE_ADDR, &tun_setup); /* tune in some frequency on tuner */ mxb->cur_freq.tuner = 0; mxb->cur_freq.type = V4L2_TUNER_ANALOG_TV; @@ -393,7 +362,6 @@ static int mxb_init_done(struct saa7146_dev* dev) mxb->cur_mute = 1; mxb->cur_mode = V4L2_TUNER_MODE_STEREO; - mxb->tda9840->driver->command(mxb->tda9840, TDA9840_SWITCH, &mxb->cur_mode); /* check if the saa7740 (aka 'sound arena module') is present on the mxb. if so, we must initialize it. due to lack of @@ -626,7 +594,8 @@ static int mxb_ioctl(struct saa7146_fh *fh, unsigned int cmd, void *arg) case VIDIOC_S_INPUT: { int input = *(int *)arg; - struct tea6415c_multiplex vm; + struct tea6415c_multiplex vm; + struct v4l2_routing route; int i = 0; DEB_EE(("VIDIOC_S_INPUT %d.\n",input)); @@ -635,19 +604,6 @@ static int mxb_ioctl(struct saa7146_fh *fh, unsigned int cmd, void *arg) return -EINVAL; } - /* fixme: locke das setzen des inputs mit hilfe des mutexes - mutex_lock(&dev->lock); - video_mux(dev,*i); - mutex_unlock(&dev->lock); - */ - - /* fixme: check if streaming capture - if ( 0 != dev->streaming ) { - DEB_D(("VIDIOC_S_INPUT illegal while streaming.\n")); - return -EPERM; - } - */ - mxb->cur_input = input; saa7146_set_hps_source_and_sync(dev, input_port_selection[input].hps_source, input_port_selection[input].hps_sync); @@ -658,7 +614,7 @@ static int mxb_ioctl(struct saa7146_fh *fh, unsigned int cmd, void *arg) case TUNER: { - i = 0; + i = SAA7115_COMPOSITE0; vm.in = 3; vm.out = 17; @@ -675,19 +631,19 @@ static int mxb_ioctl(struct saa7146_fh *fh, unsigned int cmd, void *arg) { /* nothing to be done here. aux3_yc is directly connected to the saa711a */ - i = 5; + i = SAA7115_SVIDEO1; break; } case AUX3: { /* nothing to be done here. aux3 is directly connected to the saa711a */ - i = 1; + i = SAA7115_COMPOSITE1; break; } case AUX1: { - i = 0; + i = SAA7115_COMPOSITE0; vm.in = 1; vm.out = 17; break; @@ -712,9 +668,10 @@ static int mxb_ioctl(struct saa7146_fh *fh, unsigned int cmd, void *arg) } /* switch video in saa7111a */ - if ( 0 != mxb->saa7111a->driver->command(mxb->saa7111a,DECODER_SET_INPUT, &i)) { + route.input = i; + route.output = 0; + if (mxb->saa7111a->driver->command(mxb->saa7111a, VIDIOC_INT_S_VIDEO_ROUTING, &route)) printk("VIDIOC_S_INPUT: could not address saa7111a #1.\n"); - } /* switch the audio-source only if necessary */ if( 0 == mxb->cur_mute ) { @@ -727,105 +684,35 @@ static int mxb_ioctl(struct saa7146_fh *fh, unsigned int cmd, void *arg) case VIDIOC_G_TUNER: { struct v4l2_tuner *t = arg; - int byte = 0; - if( 0 != t->index ) { + if (t->index) { DEB_D(("VIDIOC_G_TUNER: channel %d does not have a tuner attached.\n", t->index)); return -EINVAL; } DEB_EE(("VIDIOC_G_TUNER: %d\n", t->index)); - memset(t,0,sizeof(*t)); + memset(t, 0, sizeof(*t)); + i2c_clients_command(&mxb->i2c_adapter, cmd, arg); - strlcpy(t->name, "Television", sizeof(t->name)); + strlcpy(t->name, "TV Tuner", sizeof(t->name)); t->type = V4L2_TUNER_ANALOG_TV; - t->capability = V4L2_TUNER_CAP_NORM | V4L2_TUNER_CAP_STEREO | V4L2_TUNER_CAP_LANG1 | V4L2_TUNER_CAP_LANG2 | V4L2_TUNER_CAP_SAP; - t->rangelow = 772; /* 48.25 MHZ / 62.5 kHz = 772, see fi1216mk2-specs, page 2 */ - t->rangehigh = 13684; /* 855.25 MHz / 62.5 kHz = 13684 */ - /* FIXME: add the real signal strength here */ - t->signal = 0xffff; - t->afc = 0; - mxb->tda9840->driver->command(mxb->tda9840,TDA9840_DETECT, &byte); + t->capability = V4L2_TUNER_CAP_NORM | V4L2_TUNER_CAP_STEREO | \ + V4L2_TUNER_CAP_LANG1 | V4L2_TUNER_CAP_LANG2 | V4L2_TUNER_CAP_SAP; t->audmode = mxb->cur_mode; - - if( byte < 0 ) { - t->rxsubchans = V4L2_TUNER_SUB_MONO; - } else { - switch(byte) { - case TDA9840_MONO_DETECT: { - t->rxsubchans = V4L2_TUNER_SUB_MONO; - DEB_D(("VIDIOC_G_TUNER: V4L2_TUNER_MODE_MONO.\n")); - break; - } - case TDA9840_DUAL_DETECT: { - t->rxsubchans = V4L2_TUNER_SUB_LANG1 | V4L2_TUNER_SUB_LANG2; - DEB_D(("VIDIOC_G_TUNER: V4L2_TUNER_MODE_LANG1.\n")); - break; - } - case TDA9840_STEREO_DETECT: { - t->rxsubchans = V4L2_TUNER_SUB_STEREO | V4L2_TUNER_SUB_MONO; - DEB_D(("VIDIOC_G_TUNER: V4L2_TUNER_MODE_STEREO.\n")); - break; - } - default: { /* TDA9840_INCORRECT_DETECT */ - t->rxsubchans = V4L2_TUNER_MODE_MONO; - DEB_D(("VIDIOC_G_TUNER: TDA9840_INCORRECT_DETECT => V4L2_TUNER_MODE_MONO\n")); - break; - } - } - } - return 0; } case VIDIOC_S_TUNER: { struct v4l2_tuner *t = arg; - int result = 0; - int byte = 0; - if( 0 != t->index ) { + if (t->index) { DEB_D(("VIDIOC_S_TUNER: channel %d does not have a tuner attached.\n",t->index)); return -EINVAL; } - switch(t->audmode) { - case V4L2_TUNER_MODE_STEREO: { - mxb->cur_mode = V4L2_TUNER_MODE_STEREO; - byte = TDA9840_SET_STEREO; - DEB_D(("VIDIOC_S_TUNER: V4L2_TUNER_MODE_STEREO\n")); - break; - } - case V4L2_TUNER_MODE_LANG1_LANG2: { - mxb->cur_mode = V4L2_TUNER_MODE_LANG1_LANG2; - byte = TDA9840_SET_BOTH; - DEB_D(("VIDIOC_S_TUNER: V4L2_TUNER_MODE_LANG1_LANG2\n")); - break; - } - case V4L2_TUNER_MODE_LANG1: { - mxb->cur_mode = V4L2_TUNER_MODE_LANG1; - byte = TDA9840_SET_LANG1; - DEB_D(("VIDIOC_S_TUNER: V4L2_TUNER_MODE_LANG1\n")); - break; - } - case V4L2_TUNER_MODE_LANG2: { - mxb->cur_mode = V4L2_TUNER_MODE_LANG2; - byte = TDA9840_SET_LANG2; - DEB_D(("VIDIOC_S_TUNER: V4L2_TUNER_MODE_LANG2\n")); - break; - } - default: { /* case V4L2_TUNER_MODE_MONO: {*/ - mxb->cur_mode = V4L2_TUNER_MODE_MONO; - byte = TDA9840_SET_MONO; - DEB_D(("VIDIOC_S_TUNER: TDA9840_SET_MONO\n")); - break; - } - } - - if( 0 != (result = mxb->tda9840->driver->command(mxb->tda9840, TDA9840_SWITCH, &byte))) { - printk("VIDIOC_S_TUNER error. result:%d, byte:%d\n",result,byte); - } - + mxb->cur_mode = t->audmode; + i2c_clients_command(&mxb->i2c_adapter, cmd, arg); return 0; } case VIDIOC_G_FREQUENCY: @@ -852,8 +739,8 @@ static int mxb_ioctl(struct saa7146_fh *fh, unsigned int cmd, void *arg) if (V4L2_TUNER_ANALOG_TV != f->type) return -EINVAL; - if(0 != mxb->cur_input) { - DEB_D(("VIDIOC_S_FREQ: channel %d does not have a tuner!\n",mxb->cur_input)); + if (mxb->cur_input) { + DEB_D(("VIDIOC_S_FREQ: channel %d does not have a tuner!\n", mxb->cur_input)); return -EINVAL; } @@ -921,6 +808,10 @@ static int mxb_ioctl(struct saa7146_fh *fh, unsigned int cmd, void *arg) DEB_D(("VIDIOC_S_AUDIO %d.\n",a->index)); return 0; } + case VIDIOC_DBG_S_REGISTER: + case VIDIOC_DBG_G_REGISTER: + i2c_clients_command(&mxb->i2c_adapter, cmd, arg); + break; default: /* DEB2(printk("does not handle this ioctl.\n")); @@ -943,7 +834,7 @@ static int std_callback(struct saa7146_dev *dev, struct saa7146_standard *standa /* set the 7146 gpio register -- I don't know what this does exactly */ saa7146_write(dev, GPIO_CTRL, 0x00404050); /* unset the 7111 gpio register -- I don't know what this does exactly */ - mxb->saa7111a->driver->command(mxb->saa7111a, DECODER_SET_GPIO, &zero); + mxb->saa7111a->driver->command(mxb->saa7111a, VIDIOC_INT_S_GPIO, &zero); mxb->tuner->driver->command(mxb->tuner, VIDIOC_S_STD, &std); } else { v4l2_std_id std = V4L2_STD_PAL_BG; @@ -952,7 +843,7 @@ static int std_callback(struct saa7146_dev *dev, struct saa7146_standard *standa /* set the 7146 gpio register -- I don't know what this does exactly */ saa7146_write(dev, GPIO_CTRL, 0x00404050); /* set the 7111 gpio register -- I don't know what this does exactly */ - mxb->saa7111a->driver->command(mxb->saa7111a, DECODER_SET_GPIO, &one); + mxb->saa7111a->driver->command(mxb->saa7111a, VIDIOC_INT_S_GPIO, &one); mxb->tuner->driver->command(mxb->tuner, VIDIOC_S_STD, &std); } return 0; diff --git a/drivers/media/video/tda9840.c b/drivers/media/video/tda9840.c index 57deeb8..77bfd24 100644 --- a/drivers/media/video/tda9840.c +++ b/drivers/media/video/tda9840.c @@ -47,6 +47,15 @@ MODULE_PARM_DESC(debug, "Debug level (0-1)"); #define STEREO_ADJUST 0x03 #define TEST 0x04 +#define TDA9840_SET_MUTE 0x00 +#define TDA9840_SET_MONO 0x10 +#define TDA9840_SET_STEREO 0x2a +#define TDA9840_SET_LANG1 0x12 +#define TDA9840_SET_LANG2 0x1e +#define TDA9840_SET_BOTH 0x1a +#define TDA9840_SET_BOTH_R 0x16 +#define TDA9840_SET_EXTERNAL 0x7a + /* addresses to scan, found only at 0x42 (7-Bit) */ static unsigned short normal_i2c[] = { I2C_ADDR_TDA9840, I2C_CLIENT_END }; @@ -62,26 +71,74 @@ static void tda9840_write(struct i2c_client *client, u8 reg, u8 val) static int tda9840_command(struct i2c_client *client, unsigned cmd, void *arg) { - int result; + int result = 0; int byte = *(int *)arg; switch (cmd) { - case TDA9840_SWITCH: + case VIDIOC_S_TUNER: { + struct v4l2_tuner *t = arg; + int byte; + + if (t->index) + return -EINVAL; + + switch (t->audmode) { + case V4L2_TUNER_MODE_STEREO: + byte = TDA9840_SET_STEREO; + break; + case V4L2_TUNER_MODE_LANG1_LANG2: + byte = TDA9840_SET_BOTH; + break; + case V4L2_TUNER_MODE_LANG1: + byte = TDA9840_SET_LANG1; + break; + case V4L2_TUNER_MODE_LANG2: + byte = TDA9840_SET_LANG2; + break; + default: + byte = TDA9840_SET_MONO; + break; + } v4l_dbg(1, debug, client, "TDA9840_SWITCH: 0x%02x\n", byte); + tda9840_write(client, SWITCH, byte); + break; + } + + case VIDIOC_G_TUNER: { + struct v4l2_tuner *t = arg; + u8 byte; - if (byte != TDA9840_SET_MONO - && byte != TDA9840_SET_MUTE - && byte != TDA9840_SET_STEREO - && byte != TDA9840_SET_LANG1 - && byte != TDA9840_SET_LANG2 - && byte != TDA9840_SET_BOTH - && byte != TDA9840_SET_BOTH_R - && byte != TDA9840_SET_EXTERNAL) { + t->rxsubchans = V4L2_TUNER_SUB_MONO; + if (1 != i2c_master_recv(client, &byte, 1)) { + v4l_dbg(1, debug, client, + "i2c_master_recv() failed\n"); + return -EIO; + } + + if (byte & 0x80) { + v4l_dbg(1, debug, client, + "TDA9840_DETECT: register contents invalid\n"); return -EINVAL; } - tda9840_write(client, SWITCH, byte); + v4l_dbg(1, debug, client, "TDA9840_DETECT: byte: 0x%02x\n", byte); + + switch (byte & 0x60) { + case 0x00: + t->rxsubchans = V4L2_TUNER_SUB_MONO; + break; + case 0x20: + t->rxsubchans = V4L2_TUNER_SUB_LANG1 | V4L2_TUNER_SUB_LANG2; + break; + case 0x40: + t->rxsubchans = V4L2_TUNER_SUB_STEREO | V4L2_TUNER_SUB_MONO; + break; + default: /* Incorrect detect */ + t->rxsubchans = V4L2_TUNER_MODE_MONO; + break; + } break; + } case TDA9840_LEVEL_ADJUST: v4l_dbg(1, debug, client, "TDA9840_LEVEL_ADJUST: %d\n", byte); @@ -115,36 +172,6 @@ static int tda9840_command(struct i2c_client *client, unsigned cmd, void *arg) tda9840_write(client, STEREO_ADJUST, byte); break; - - case TDA9840_DETECT: { - int *ret = (int *)arg; - - byte = i2c_smbus_read_byte_data(client, STEREO_ADJUST); - if (byte == -1) { - v4l_dbg(1, debug, client, - "i2c_smbus_read_byte_data() failed\n"); - return -EIO; - } - - if (byte & 0x80) { - v4l_dbg(1, debug, client, - "TDA9840_DETECT: register contents invalid\n"); - return -EINVAL; - } - - v4l_dbg(1, debug, client, "TDA9840_DETECT: byte: 0x%02x\n", byte); - *ret = (byte & 0x60) >> 5; - result = 0; - break; - } - case TDA9840_TEST: - v4l_dbg(1, debug, client, "TDA9840_TEST: 0x%02x\n", byte); - - /* mask out irrelevant bits */ - byte &= 0x3; - - tda9840_write(client, TEST, byte); - break; default: return -ENOIOCTLCMD; } @@ -174,8 +201,7 @@ static int tda9840_probe(struct i2c_client *client, byte = 0; result = tda9840_command(client, TDA9840_LEVEL_ADJUST, &byte); result += tda9840_command(client, TDA9840_STEREO_ADJUST, &byte); - byte = TDA9840_SET_MONO; - result = tda9840_command(client, TDA9840_SWITCH, &byte); + tda9840_write(client, SWITCH, TDA9840_SET_STEREO); if (result) { v4l_dbg(1, debug, client, "could not initialize tda9840\n"); return -ENODEV; diff --git a/drivers/media/video/tda9840.h b/drivers/media/video/tda9840.h index 7da8432..dc12ae7 100644 --- a/drivers/media/video/tda9840.h +++ b/drivers/media/video/tda9840.h @@ -3,24 +3,6 @@ #define I2C_ADDR_TDA9840 0x42 -#define TDA9840_DETECT _IOR('v',1,int) -/* return values for TDA9840_DETCT */ -#define TDA9840_MONO_DETECT 0x0 -#define TDA9840_DUAL_DETECT 0x1 -#define TDA9840_STEREO_DETECT 0x2 -#define TDA9840_INCORRECT_DETECT 0x3 - -#define TDA9840_SWITCH _IOW('v',2,int) -/* modes than can be set with TDA9840_SWITCH */ -#define TDA9840_SET_MUTE 0x00 -#define TDA9840_SET_MONO 0x10 -#define TDA9840_SET_STEREO 0x2a -#define TDA9840_SET_LANG1 0x12 -#define TDA9840_SET_LANG2 0x1e -#define TDA9840_SET_BOTH 0x1a -#define TDA9840_SET_BOTH_R 0x16 -#define TDA9840_SET_EXTERNAL 0x7a - /* values may range between +2.5 and -2.0; the value has to be multiplied with 10 */ #define TDA9840_LEVEL_ADJUST _IOW('v',3,int) @@ -29,7 +11,4 @@ the value has to be multiplied with 10 */ #define TDA9840_STEREO_ADJUST _IOW('v',4,int) -/* currently not implemented */ -#define TDA9840_TEST _IOW('v',5,int) - #endif -- cgit v0.10.2 From 2633812f897cc354071699e86ea82e3bfd77cddc Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Sat, 6 Sep 2008 17:24:30 -0300 Subject: V4L/DVB (8942): mxb: coding style cleanups Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/mxb.c b/drivers/media/video/mxb.c index 621d174..b2dae50 100644 --- a/drivers/media/video/mxb.c +++ b/drivers/media/video/mxb.c @@ -137,12 +137,12 @@ struct mxb struct i2c_adapter i2c_adapter; - struct i2c_client* saa7111a; - struct i2c_client* tda9840; - struct i2c_client* tea6415c; - struct i2c_client* tuner; - struct i2c_client* tea6420_1; - struct i2c_client* tea6420_2; + struct i2c_client *saa7111a; + struct i2c_client *tda9840; + struct i2c_client *tea6415c; + struct i2c_client *tuner; + struct i2c_client *tea6420_1; + struct i2c_client *tea6420_2; int cur_mode; /* current audio mode (mono, stereo, ...) */ int cur_input; /* current input */ @@ -154,7 +154,7 @@ static struct saa7146_extension extension; static int mxb_check_clients(struct device *dev, void *data) { - struct mxb* mxb = data; + struct mxb *mxb = data; struct i2c_client *client = i2c_verify_client(dev); if (!client) @@ -298,7 +298,7 @@ static struct { { 9, { 0x1d, 0xed, 0xd0, 0x68, 0x29, 0xb4, 0xe1, 0x00, 0xb8 } }, { 9, { 0x3d, 0xed, 0xd0, 0x68, 0x29, 0xb4, 0xe1, 0x00, 0xb8 } }, { 3, { 0x80, 0xb3, 0x0a } }, - {-1, { 0} } + {-1, { 0 } } }; /* bring hardware to a sane state. this has to be done, just in case someone @@ -314,10 +314,9 @@ static int mxb_init_done(struct saa7146_dev* dev) struct v4l2_routing route; int i = 0, err = 0; - struct tea6415c_multiplex vm; + struct tea6415c_multiplex vm; /* select video mode in saa7111a */ - /* fixme: currently pointless: gets overwritten by configuration below */ mxb->saa7111a->driver->command(mxb->saa7111a, VIDIOC_S_STD, &std); /* select tuner-output on saa7111a */ @@ -342,20 +341,20 @@ static int mxb_init_done(struct saa7146_dev* dev) mxb->tuner->driver->command(mxb->tuner, VIDIOC_S_STD, &std); /* mute audio on tea6420s */ - mxb->tea6420_1->driver->command(mxb->tea6420_1,TEA6420_SWITCH, &TEA6420_line[6][0]); - mxb->tea6420_2->driver->command(mxb->tea6420_2,TEA6420_SWITCH, &TEA6420_line[6][1]); - mxb->tea6420_1->driver->command(mxb->tea6420_1,TEA6420_SWITCH, &TEA6420_cd[6][0]); - mxb->tea6420_2->driver->command(mxb->tea6420_2,TEA6420_SWITCH, &TEA6420_cd[6][1]); + mxb->tea6420_1->driver->command(mxb->tea6420_1, TEA6420_SWITCH, &TEA6420_line[6][0]); + mxb->tea6420_2->driver->command(mxb->tea6420_2, TEA6420_SWITCH, &TEA6420_line[6][1]); + mxb->tea6420_1->driver->command(mxb->tea6420_1, TEA6420_SWITCH, &TEA6420_cd[6][0]); + mxb->tea6420_2->driver->command(mxb->tea6420_2, TEA6420_SWITCH, &TEA6420_cd[6][1]); /* switch to tuner-channel on tea6415c*/ vm.out = 17; vm.in = 3; - mxb->tea6415c->driver->command(mxb->tea6415c,TEA6415C_SWITCH, &vm); + mxb->tea6415c->driver->command(mxb->tea6415c, TEA6415C_SWITCH, &vm); /* select tuner-output on multicable on tea6415c*/ vm.in = 3; vm.out = 13; - mxb->tea6415c->driver->command(mxb->tea6415c,TEA6415C_SWITCH, &vm); + mxb->tea6415c->driver->command(mxb->tea6415c, TEA6415C_SWITCH, &vm); /* the rest for mxb */ mxb->cur_input = 0; @@ -372,21 +371,22 @@ static int mxb_init_done(struct saa7146_dev* dev) msg.len = mxb_saa7740_init[0].length; msg.buf = &mxb_saa7740_init[0].data[0]; - if( 1 == (err = i2c_transfer(&mxb->i2c_adapter, &msg, 1))) { + err = i2c_transfer(&mxb->i2c_adapter, &msg, 1); + if (err == 1) { /* the sound arena module is a pos, that's probably the reason philips refuses to hand out a datasheet for the saa7740... it seems to screw up the i2c bus, so we disable fast irq based i2c transactions here and rely on the slow and safe polling method ... */ extension.flags &= ~SAA7146_USE_I2C_IRQ; - for(i = 1;;i++) { - if( -1 == mxb_saa7740_init[i].length ) { + for (i = 1; ; i++) { + if (-1 == mxb_saa7740_init[i].length) break; - } msg.len = mxb_saa7740_init[i].length; msg.buf = &mxb_saa7740_init[i].data[0]; - if( 1 != (err = i2c_transfer(&mxb->i2c_adapter, &msg, 1))) { + err = i2c_transfer(&mxb->i2c_adapter, &msg, 1); + if (err != 1) { DEB_D(("failed to initialize 'sound arena module'.\n")); goto err; } @@ -400,7 +400,8 @@ err: /* ext->saa has been filled by the core driver */ /* some stuff is done via variables */ - saa7146_set_hps_source_and_sync(dev, input_port_selection[mxb->cur_input].hps_source, input_port_selection[mxb->cur_input].hps_sync); + saa7146_set_hps_source_and_sync(dev, input_port_selection[mxb->cur_input].hps_source, + input_port_selection[mxb->cur_input].hps_sync); /* some stuff is done via direct write to the registers */ @@ -425,11 +426,11 @@ void mxb_irq_bh(struct saa7146_dev* dev, u32* irq_mask) static struct saa7146_ext_vv vv_data; /* this function only gets called when the probing was successful */ -static int mxb_attach(struct saa7146_dev* dev, struct saa7146_pci_extension_data *info) +static int mxb_attach(struct saa7146_dev *dev, struct saa7146_pci_extension_data *info) { - struct mxb* mxb = (struct mxb*)dev->ext_priv; + struct mxb *mxb = (struct mxb *)dev->ext_priv; - DEB_EE(("dev:%p\n",dev)); + DEB_EE(("dev:%p\n", dev)); /* checking for i2c-devices can be omitted here, because we already did this in "mxb_vl42_probe" */ @@ -461,11 +462,11 @@ static int mxb_attach(struct saa7146_dev* dev, struct saa7146_pci_extension_data return 0; } -static int mxb_detach(struct saa7146_dev* dev) +static int mxb_detach(struct saa7146_dev *dev) { - struct mxb* mxb = (struct mxb*)dev->ext_priv; + struct mxb *mxb = (struct mxb *)dev->ext_priv; - DEB_EE(("dev:%p\n",dev)); + DEB_EE(("dev:%p\n", dev)); i2c_release_client(mxb->tea6420_1); i2c_release_client(mxb->tea6420_2); @@ -475,9 +476,8 @@ static int mxb_detach(struct saa7146_dev* dev) i2c_release_client(mxb->tuner); saa7146_unregister_device(&mxb->video_dev,dev); - if( 0 != MXB_BOARD_CAN_DO_VBI(dev)) { - saa7146_unregister_device(&mxb->vbi_dev,dev); - } + if (MXB_BOARD_CAN_DO_VBI(dev)) + saa7146_unregister_device(&mxb->vbi_dev, dev); saa7146_vv_release(dev); mxb_num--; @@ -491,7 +491,7 @@ static int mxb_detach(struct saa7146_dev* dev) static int mxb_ioctl(struct saa7146_fh *fh, unsigned int cmd, void *arg) { struct saa7146_dev *dev = fh->dev; - struct mxb* mxb = (struct mxb*)dev->ext_priv; + struct mxb *mxb = (struct mxb *)dev->ext_priv; struct saa7146_vv *vv = dev->vv_data; switch(cmd) { @@ -500,11 +500,9 @@ static int mxb_ioctl(struct saa7146_fh *fh, unsigned int cmd, void *arg) struct v4l2_input *i = arg; DEB_EE(("VIDIOC_ENUMINPUT %d.\n",i->index)); - if( i->index < 0 || i->index >= MXB_INPUTS) { + if (i->index < 0 || i->index >= MXB_INPUTS) return -EINVAL; - } memcpy(i, &mxb_inputs[i->index], sizeof(struct v4l2_input)); - return 0; } /* the saa7146 provides some controls (brightness, contrast, saturation) @@ -518,7 +516,7 @@ static int mxb_ioctl(struct saa7146_fh *fh, unsigned int cmd, void *arg) for (i = MAXCONTROLS - 1; i >= 0; i--) { if (mxb_controls[i].id == qc->id) { *qc = mxb_controls[i]; - DEB_D(("VIDIOC_QUERYCTRL %d.\n",qc->id)); + DEB_D(("VIDIOC_QUERYCTRL %d.\n", qc->id)); return 0; } } @@ -530,56 +528,51 @@ static int mxb_ioctl(struct saa7146_fh *fh, unsigned int cmd, void *arg) int i; for (i = MAXCONTROLS - 1; i >= 0; i--) { - if (mxb_controls[i].id == vc->id) { + if (mxb_controls[i].id == vc->id) break; - } } - if( i < 0 ) { + if (i < 0) return -EAGAIN; - } - switch (vc->id ) { - case V4L2_CID_AUDIO_MUTE: { - vc->value = mxb->cur_mute; - DEB_D(("VIDIOC_G_CTRL V4L2_CID_AUDIO_MUTE:%d.\n",vc->value)); - return 0; - } + if (vc->id == V4L2_CID_AUDIO_MUTE) { + vc->value = mxb->cur_mute; + DEB_D(("VIDIOC_G_CTRL V4L2_CID_AUDIO_MUTE:%d.\n", vc->value)); + return 0; } - DEB_EE(("VIDIOC_G_CTRL V4L2_CID_AUDIO_MUTE:%d.\n",vc->value)); + DEB_EE(("VIDIOC_G_CTRL V4L2_CID_AUDIO_MUTE:%d.\n", vc->value)); return 0; } case VIDIOC_S_CTRL: { - struct v4l2_control *vc = arg; + struct v4l2_control *vc = arg; int i = 0; for (i = MAXCONTROLS - 1; i >= 0; i--) { - if (mxb_controls[i].id == vc->id) { + if (mxb_controls[i].id == vc->id) break; - } } - if( i < 0 ) { + if (i < 0) return -EAGAIN; - } - switch (vc->id ) { - case V4L2_CID_AUDIO_MUTE: { - mxb->cur_mute = vc->value; - if( 0 == vc->value ) { - /* switch the audio-source */ - mxb->tea6420_1->driver->command(mxb->tea6420_1,TEA6420_SWITCH, &TEA6420_line[video_audio_connect[mxb->cur_input]][0]); - mxb->tea6420_2->driver->command(mxb->tea6420_2,TEA6420_SWITCH, &TEA6420_line[video_audio_connect[mxb->cur_input]][1]); - } else { - mxb->tea6420_1->driver->command(mxb->tea6420_1,TEA6420_SWITCH, &TEA6420_line[6][0]); - mxb->tea6420_2->driver->command(mxb->tea6420_2,TEA6420_SWITCH, &TEA6420_line[6][1]); - } - DEB_EE(("VIDIOC_S_CTRL, V4L2_CID_AUDIO_MUTE: %d.\n",vc->value)); - break; + if (vc->id == V4L2_CID_AUDIO_MUTE) { + mxb->cur_mute = vc->value; + if (!vc->value) { + /* switch the audio-source */ + mxb->tea6420_1->driver->command(mxb->tea6420_1, TEA6420_SWITCH, + &TEA6420_line[video_audio_connect[mxb->cur_input]][0]); + mxb->tea6420_2->driver->command(mxb->tea6420_2, TEA6420_SWITCH, + &TEA6420_line[video_audio_connect[mxb->cur_input]][1]); + } else { + mxb->tea6420_1->driver->command(mxb->tea6420_1, TEA6420_SWITCH, + &TEA6420_line[6][0]); + mxb->tea6420_2->driver->command(mxb->tea6420_2, TEA6420_SWITCH, + &TEA6420_line[6][1]); } + DEB_EE(("VIDIOC_S_CTRL, V4L2_CID_AUDIO_MUTE: %d.\n", vc->value)); } return 0; } @@ -588,7 +581,7 @@ static int mxb_ioctl(struct saa7146_fh *fh, unsigned int cmd, void *arg) int *input = (int *)arg; *input = mxb->cur_input; - DEB_EE(("VIDIOC_G_INPUT %d.\n",*input)); + DEB_EE(("VIDIOC_G_INPUT %d.\n", *input)); return 0; } case VIDIOC_S_INPUT: @@ -598,73 +591,60 @@ static int mxb_ioctl(struct saa7146_fh *fh, unsigned int cmd, void *arg) struct v4l2_routing route; int i = 0; - DEB_EE(("VIDIOC_S_INPUT %d.\n",input)); + DEB_EE(("VIDIOC_S_INPUT %d.\n", input)); - if (input < 0 || input >= MXB_INPUTS) { + if (input < 0 || input >= MXB_INPUTS) return -EINVAL; - } mxb->cur_input = input; - saa7146_set_hps_source_and_sync(dev, input_port_selection[input].hps_source, input_port_selection[input].hps_sync); + saa7146_set_hps_source_and_sync(dev, input_port_selection[input].hps_source, + input_port_selection[input].hps_sync); /* prepare switching of tea6415c and saa7111a; have a look at the 'background'-file for further informations */ - switch( input ) { - - case TUNER: - { - i = SAA7115_COMPOSITE0; - vm.in = 3; - vm.out = 17; - - if ( 0 != mxb->tea6415c->driver->command(mxb->tea6415c,TEA6415C_SWITCH, &vm)) { - printk("VIDIOC_S_INPUT: could not address tea6415c #1\n"); - return -EFAULT; - } - /* connect tuner-output always to multicable */ - vm.in = 3; - vm.out = 13; - break; - } - case AUX3_YC: - { - /* nothing to be done here. aux3_yc is - directly connected to the saa711a */ - i = SAA7115_SVIDEO1; - break; - } - case AUX3: - { - /* nothing to be done here. aux3 is - directly connected to the saa711a */ - i = SAA7115_COMPOSITE1; - break; - } - case AUX1: - { - i = SAA7115_COMPOSITE0; - vm.in = 1; - vm.out = 17; - break; + switch (input) { + case TUNER: + i = SAA7115_COMPOSITE0; + vm.in = 3; + vm.out = 17; + + if (mxb->tea6415c->driver->command(mxb->tea6415c, TEA6415C_SWITCH, &vm)) { + printk(KERN_ERR "VIDIOC_S_INPUT: could not address tea6415c #1\n"); + return -EFAULT; } + /* connect tuner-output always to multicable */ + vm.in = 3; + vm.out = 13; + break; + case AUX3_YC: + /* nothing to be done here. aux3_yc is + directly connected to the saa711a */ + i = SAA7115_SVIDEO1; + break; + case AUX3: + /* nothing to be done here. aux3 is + directly connected to the saa711a */ + i = SAA7115_COMPOSITE1; + break; + case AUX1: + i = SAA7115_COMPOSITE0; + vm.in = 1; + vm.out = 17; + break; } /* switch video in tea6415c only if necessary */ - switch( input ) { - case TUNER: - case AUX1: - { - if ( 0 != mxb->tea6415c->driver->command(mxb->tea6415c,TEA6415C_SWITCH, &vm)) { - printk("VIDIOC_S_INPUT: could not address tea6415c #3\n"); - return -EFAULT; - } - break; - } - default: - { - break; + switch (input) { + case TUNER: + case AUX1: + if (mxb->tea6415c->driver->command(mxb->tea6415c, TEA6415C_SWITCH, &vm)) { + printk(KERN_ERR "VIDIOC_S_INPUT: could not address tea6415c #3\n"); + return -EFAULT; } + break; + default: + break; } /* switch video in saa7111a */ @@ -675,8 +655,10 @@ static int mxb_ioctl(struct saa7146_fh *fh, unsigned int cmd, void *arg) /* switch the audio-source only if necessary */ if( 0 == mxb->cur_mute ) { - mxb->tea6420_1->driver->command(mxb->tea6420_1,TEA6420_SWITCH, &TEA6420_line[video_audio_connect[input]][0]); - mxb->tea6420_2->driver->command(mxb->tea6420_2,TEA6420_SWITCH, &TEA6420_line[video_audio_connect[input]][1]); + mxb->tea6420_1->driver->command(mxb->tea6420_1, TEA6420_SWITCH, + &TEA6420_line[video_audio_connect[input]][0]); + mxb->tea6420_2->driver->command(mxb->tea6420_2, TEA6420_SWITCH, + &TEA6420_line[video_audio_connect[input]][1]); } return 0; @@ -719,8 +701,9 @@ static int mxb_ioctl(struct saa7146_fh *fh, unsigned int cmd, void *arg) { struct v4l2_frequency *f = arg; - if(0 != mxb->cur_input) { - DEB_D(("VIDIOC_G_FREQ: channel %d does not have a tuner!\n",mxb->cur_input)); + if (mxb->cur_input) { + DEB_D(("VIDIOC_G_FREQ: channel %d does not have a tuner!\n", + mxb->cur_input)); return -EINVAL; } @@ -733,7 +716,7 @@ static int mxb_ioctl(struct saa7146_fh *fh, unsigned int cmd, void *arg) { struct v4l2_frequency *f = arg; - if (0 != f->tuner) + if (f->tuner) return -EINVAL; if (V4L2_TUNER_ANALOG_TV != f->type) @@ -761,7 +744,7 @@ static int mxb_ioctl(struct saa7146_fh *fh, unsigned int cmd, void *arg) { int i = *(int*)arg; - if( i < 0 || i >= MXB_AUDIOS ) { + if (i < 0 || i >= MXB_AUDIOS) { DEB_D(("illegal argument to MXB_S_AUDIO_CD: i:%d.\n",i)); return -EINVAL; } @@ -777,7 +760,7 @@ static int mxb_ioctl(struct saa7146_fh *fh, unsigned int cmd, void *arg) { int i = *(int*)arg; - if( i < 0 || i >= MXB_AUDIOS ) { + if (i < 0 || i >= MXB_AUDIOS) { DEB_D(("illegal argument to MXB_S_AUDIO_LINE: i:%d.\n",i)); return -EINVAL; } @@ -792,12 +775,12 @@ static int mxb_ioctl(struct saa7146_fh *fh, unsigned int cmd, void *arg) { struct v4l2_audio *a = arg; - if( a->index < 0 || a->index > MXB_INPUTS ) { - DEB_D(("VIDIOC_G_AUDIO %d out of range.\n",a->index)); + if (a->index < 0 || a->index > MXB_INPUTS) { + DEB_D(("VIDIOC_G_AUDIO %d out of range.\n", a->index)); return -EINVAL; } - DEB_EE(("VIDIOC_G_AUDIO %d.\n",a->index)); + DEB_EE(("VIDIOC_G_AUDIO %d.\n", a->index)); memcpy(a, &mxb_audios[video_audio_connect[mxb->cur_input]], sizeof(struct v4l2_audio)); return 0; @@ -805,13 +788,16 @@ static int mxb_ioctl(struct saa7146_fh *fh, unsigned int cmd, void *arg) case VIDIOC_S_AUDIO: { struct v4l2_audio *a = arg; - DEB_D(("VIDIOC_S_AUDIO %d.\n",a->index)); + + DEB_D(("VIDIOC_S_AUDIO %d.\n", a->index)); return 0; } +#ifdef CONFIG_VIDEO_ADV_DEBUG case VIDIOC_DBG_S_REGISTER: case VIDIOC_DBG_G_REGISTER: i2c_clients_command(&mxb->i2c_adapter, cmd, arg); - break; + return 0; +#endif default: /* DEB2(printk("does not handle this ioctl.\n")); @@ -919,7 +905,7 @@ static struct saa7146_extension extension = { static int __init mxb_init_module(void) { - if( 0 != saa7146_register_extension(&extension)) { + if (saa7146_register_extension(&extension)) { DEB_S(("failed to register extension.\n")); return -ENODEV; } -- cgit v0.10.2 From 71ef85c7e0f431467c2e18314ff0cb8fa2b84e5f Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Sun, 7 Sep 2008 08:31:13 -0300 Subject: V4L/DVB (8943): saa5246a: convert i2c driver for new i2c API - Convert to use v4l2-i2c-drv-legacy.h to be able to handle the new i2c API - Cleanups - Use v4l_dbg/v4l_info to have uniform kernel messages Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/saa5246a.c b/drivers/media/video/saa5246a.c index ff81049..4a21b8a 100644 --- a/drivers/media/video/saa5246a.c +++ b/drivers/media/video/saa5246a.c @@ -43,138 +43,363 @@ #include #include #include -#include #include +#include +#include #include #include #include -#include - -#include "saa5246a.h" +#include MODULE_AUTHOR("Michael Geng "); MODULE_DESCRIPTION("Philips SAA5246A, SAA5281 Teletext decoder driver"); MODULE_LICENSE("GPL"); -struct saa5246a_device -{ - u8 pgbuf[NUM_DAUS][VTX_VIRTUALSIZE]; - int is_searching[NUM_DAUS]; - struct i2c_client *client; - unsigned long in_use; - struct mutex lock; -}; +#define MAJOR_VERSION 1 /* driver major version number */ +#define MINOR_VERSION 8 /* driver minor version number */ + +/* Number of DAUs = number of pages that can be searched at the same time. */ +#define NUM_DAUS 4 + +#define NUM_ROWS_PER_PAGE 40 + +/* first column is 0 (not 1) */ +#define POS_TIME_START 32 +#define POS_TIME_END 39 + +#define POS_HEADER_START 7 +#define POS_HEADER_END 31 + +/* Returns 'true' if the part of the videotext page described with req contains + (at least parts of) the time field */ +#define REQ_CONTAINS_TIME(p_req) \ + ((p_req)->start <= POS_TIME_END && \ + (p_req)->end >= POS_TIME_START) + +/* Returns 'true' if the part of the videotext page described with req contains + (at least parts of) the page header */ +#define REQ_CONTAINS_HEADER(p_req) \ + ((p_req)->start <= POS_HEADER_END && \ + (p_req)->end >= POS_HEADER_START) + +/*****************************************************************************/ +/* Mode register numbers of the SAA5246A */ +/*****************************************************************************/ +#define SAA5246A_REGISTER_R0 0 +#define SAA5246A_REGISTER_R1 1 +#define SAA5246A_REGISTER_R2 2 +#define SAA5246A_REGISTER_R3 3 +#define SAA5246A_REGISTER_R4 4 +#define SAA5246A_REGISTER_R5 5 +#define SAA5246A_REGISTER_R6 6 +#define SAA5246A_REGISTER_R7 7 +#define SAA5246A_REGISTER_R8 8 +#define SAA5246A_REGISTER_R9 9 +#define SAA5246A_REGISTER_R10 10 +#define SAA5246A_REGISTER_R11 11 +#define SAA5246A_REGISTER_R11B 11 + +/* SAA5246A mode registers often autoincrement to the next register. + Therefore we use variable argument lists. The following macro indicates + the end of a command list. */ +#define COMMAND_END (-1) + +/*****************************************************************************/ +/* Contents of the mode registers of the SAA5246A */ +/*****************************************************************************/ +/* Register R0 (Advanced Control) */ +#define R0_SELECT_R11 0x00 +#define R0_SELECT_R11B 0x01 + +#define R0_PLL_TIME_CONSTANT_LONG 0x00 +#define R0_PLL_TIME_CONSTANT_SHORT 0x02 + +#define R0_ENABLE_nODD_EVEN_OUTPUT 0x00 +#define R0_DISABLE_nODD_EVEN_OUTPUT 0x04 + +#define R0_ENABLE_HDR_POLL 0x00 +#define R0_DISABLE_HDR_POLL 0x10 + +#define R0_DO_NOT_FORCE_nODD_EVEN_LOW_IF_PICTURE_DISPLAYED 0x00 +#define R0_FORCE_nODD_EVEN_LOW_IF_PICTURE_DISPLAYED 0x20 + +#define R0_NO_FREE_RUN_PLL 0x00 +#define R0_FREE_RUN_PLL 0x40 + +#define R0_NO_AUTOMATIC_FASTEXT_PROMPT 0x00 +#define R0_AUTOMATIC_FASTEXT_PROMPT 0x80 + +/* Register R1 (Mode) */ +#define R1_INTERLACED_312_AND_HALF_312_AND_HALF_LINES 0x00 +#define R1_NON_INTERLACED_312_313_LINES 0x01 +#define R1_NON_INTERLACED_312_312_LINES 0x02 +#define R1_FFB_LEADING_EDGE_IN_FIRST_BROAD_PULSE 0x03 +#define R1_FFB_LEADING_EDGE_IN_SECOND_BROAD_PULSE 0x07 + +#define R1_DEW 0x00 +#define R1_FULL_FIELD 0x08 + +#define R1_EXTENDED_PACKET_DISABLE 0x00 +#define R1_EXTENDED_PACKET_ENABLE 0x10 + +#define R1_DAUS_ALL_ON 0x00 +#define R1_DAUS_ALL_OFF 0x20 + +#define R1_7_BITS_PLUS_PARITY 0x00 +#define R1_8_BITS_NO_PARITY 0x40 + +#define R1_VCS_TO_SCS 0x00 +#define R1_NO_VCS_TO_SCS 0x80 + +/* Register R2 (Page request address) */ +#define R2_IN_R3_SELECT_PAGE_HUNDREDS 0x00 +#define R2_IN_R3_SELECT_PAGE_TENS 0x01 +#define R2_IN_R3_SELECT_PAGE_UNITS 0x02 +#define R2_IN_R3_SELECT_HOURS_TENS 0x03 +#define R2_IN_R3_SELECT_HOURS_UNITS 0x04 +#define R2_IN_R3_SELECT_MINUTES_TENS 0x05 +#define R2_IN_R3_SELECT_MINUTES_UNITS 0x06 + +#define R2_DAU_0 0x00 +#define R2_DAU_1 0x10 +#define R2_DAU_2 0x20 +#define R2_DAU_3 0x30 + +#define R2_BANK_0 0x00 +#define R2_BANK 1 0x40 + +#define R2_HAMMING_CHECK_ON 0x80 +#define R2_HAMMING_CHECK_OFF 0x00 + +/* Register R3 (Page request data) */ +#define R3_PAGE_HUNDREDS_0 0x00 +#define R3_PAGE_HUNDREDS_1 0x01 +#define R3_PAGE_HUNDREDS_2 0x02 +#define R3_PAGE_HUNDREDS_3 0x03 +#define R3_PAGE_HUNDREDS_4 0x04 +#define R3_PAGE_HUNDREDS_5 0x05 +#define R3_PAGE_HUNDREDS_6 0x06 +#define R3_PAGE_HUNDREDS_7 0x07 -static struct video_device saa_template; /* Declared near bottom */ +#define R3_HOLD_PAGE 0x00 +#define R3_UPDATE_PAGE 0x08 -/* Addresses to scan */ -static unsigned short normal_i2c[] = { I2C_ADDRESS, I2C_CLIENT_END }; +#define R3_PAGE_HUNDREDS_DO_NOT_CARE 0x00 +#define R3_PAGE_HUNDREDS_DO_CARE 0x10 -I2C_CLIENT_INSMOD; +#define R3_PAGE_TENS_DO_NOT_CARE 0x00 +#define R3_PAGE_TENS_DO_CARE 0x10 -static struct i2c_client client_template; +#define R3_PAGE_UNITS_DO_NOT_CARE 0x00 +#define R3_PAGE_UNITS_DO_CARE 0x10 -static int saa5246a_attach(struct i2c_adapter *adap, int addr, int kind) -{ - int pgbuf; - int err; - struct i2c_client *client; - struct video_device *vd; - struct saa5246a_device *t; +#define R3_HOURS_TENS_DO_NOT_CARE 0x00 +#define R3_HOURS_TENS_DO_CARE 0x10 - printk(KERN_INFO "saa5246a: teletext chip found.\n"); - client=kmalloc(sizeof(*client), GFP_KERNEL); - if(client==NULL) - return -ENOMEM; - client_template.adapter = adap; - client_template.addr = addr; - memcpy(client, &client_template, sizeof(*client)); - t = kzalloc(sizeof(*t), GFP_KERNEL); - if(t==NULL) - { - kfree(client); - return -ENOMEM; - } - strlcpy(client->name, IF_NAME, I2C_NAME_SIZE); - mutex_init(&t->lock); +#define R3_HOURS_UNITS_DO_NOT_CARE 0x00 +#define R3_HOURS_UNITS_DO_CARE 0x10 - /* - * Now create a video4linux device - */ +#define R3_MINUTES_TENS_DO_NOT_CARE 0x00 +#define R3_MINUTES_TENS_DO_CARE 0x10 - vd = video_device_alloc(); - if(vd==NULL) - { - kfree(t); - kfree(client); - return -ENOMEM; - } - i2c_set_clientdata(client, vd); - memcpy(vd, &saa_template, sizeof(*vd)); +#define R3_MINUTES_UNITS_DO_NOT_CARE 0x00 +#define R3_MINUTES_UNITS_DO_CARE 0x10 - for (pgbuf = 0; pgbuf < NUM_DAUS; pgbuf++) - { - memset(t->pgbuf[pgbuf], ' ', sizeof(t->pgbuf[0])); - t->is_searching[pgbuf] = false; - } - video_set_drvdata(vd, t); +/* Register R4 (Display chapter) */ +#define R4_DISPLAY_PAGE_0 0x00 +#define R4_DISPLAY_PAGE_1 0x01 +#define R4_DISPLAY_PAGE_2 0x02 +#define R4_DISPLAY_PAGE_3 0x03 +#define R4_DISPLAY_PAGE_4 0x04 +#define R4_DISPLAY_PAGE_5 0x05 +#define R4_DISPLAY_PAGE_6 0x06 +#define R4_DISPLAY_PAGE_7 0x07 +/* Register R5 (Normal display control) */ +#define R5_PICTURE_INSIDE_BOXING_OFF 0x00 +#define R5_PICTURE_INSIDE_BOXING_ON 0x01 - /* - * Register it - */ +#define R5_PICTURE_OUTSIDE_BOXING_OFF 0x00 +#define R5_PICTURE_OUTSIDE_BOXING_ON 0x02 - if((err=video_register_device(vd, VFL_TYPE_VTX,-1))<0) - { - kfree(t); - kfree(client); - video_device_release(vd); - return err; - } - t->client = client; - i2c_attach_client(client); - return 0; -} +#define R5_TEXT_INSIDE_BOXING_OFF 0x00 +#define R5_TEXT_INSIDE_BOXING_ON 0x04 -/* - * We do most of the hard work when we become a device on the i2c. - */ -static int saa5246a_probe(struct i2c_adapter *adap) -{ - if (adap->class & I2C_CLASS_TV_ANALOG) - return i2c_probe(adap, &addr_data, saa5246a_attach); - return 0; -} +#define R5_TEXT_OUTSIDE_BOXING_OFF 0x00 +#define R5_TEXT_OUTSIDE_BOXING_ON 0x08 -static int saa5246a_detach(struct i2c_client *client) -{ - struct video_device *vd = i2c_get_clientdata(client); +#define R5_CONTRAST_REDUCTION_INSIDE_BOXING_OFF 0x00 +#define R5_CONTRAST_REDUCTION_INSIDE_BOXING_ON 0x10 - i2c_detach_client(client); - video_unregister_device(vd); - kfree(video_get_drvdata(vd)); - kfree(client); - return 0; -} +#define R5_CONTRAST_REDUCTION_OUTSIDE_BOXING_OFF 0x00 +#define R5_CONTRAST_REDUCTION_OUTSIDE_BOXING_ON 0x20 -/* - * I2C interfaces - */ +#define R5_BACKGROUND_COLOR_INSIDE_BOXING_OFF 0x00 +#define R5_BACKGROUND_COLOR_INSIDE_BOXING_ON 0x40 + +#define R5_BACKGROUND_COLOR_OUTSIDE_BOXING_OFF 0x00 +#define R5_BACKGROUND_COLOR_OUTSIDE_BOXING_ON 0x80 + +/* Register R6 (Newsflash display) */ +#define R6_NEWSFLASH_PICTURE_INSIDE_BOXING_OFF 0x00 +#define R6_NEWSFLASH_PICTURE_INSIDE_BOXING_ON 0x01 + +#define R6_NEWSFLASH_PICTURE_OUTSIDE_BOXING_OFF 0x00 +#define R6_NEWSFLASH_PICTURE_OUTSIDE_BOXING_ON 0x02 + +#define R6_NEWSFLASH_TEXT_INSIDE_BOXING_OFF 0x00 +#define R6_NEWSFLASH_TEXT_INSIDE_BOXING_ON 0x04 + +#define R6_NEWSFLASH_TEXT_OUTSIDE_BOXING_OFF 0x00 +#define R6_NEWSFLASH_TEXT_OUTSIDE_BOXING_ON 0x08 + +#define R6_NEWSFLASH_CONTRAST_REDUCTION_INSIDE_BOXING_OFF 0x00 +#define R6_NEWSFLASH_CONTRAST_REDUCTION_INSIDE_BOXING_ON 0x10 + +#define R6_NEWSFLASH_CONTRAST_REDUCTION_OUTSIDE_BOXING_OFF 0x00 +#define R6_NEWSFLASH_CONTRAST_REDUCTION_OUTSIDE_BOXING_ON 0x20 + +#define R6_NEWSFLASH_BACKGROUND_COLOR_INSIDE_BOXING_OFF 0x00 +#define R6_NEWSFLASH_BACKGROUND_COLOR_INSIDE_BOXING_ON 0x40 + +#define R6_NEWSFLASH_BACKGROUND_COLOR_OUTSIDE_BOXING_OFF 0x00 +#define R6_NEWSFLASH_BACKGROUND_COLOR_OUTSIDE_BOXING_ON 0x80 + +/* Register R7 (Display mode) */ +#define R7_BOX_OFF_ROW_0 0x00 +#define R7_BOX_ON_ROW_0 0x01 + +#define R7_BOX_OFF_ROW_1_TO_23 0x00 +#define R7_BOX_ON_ROW_1_TO_23 0x02 + +#define R7_BOX_OFF_ROW_24 0x00 +#define R7_BOX_ON_ROW_24 0x04 + +#define R7_SINGLE_HEIGHT 0x00 +#define R7_DOUBLE_HEIGHT 0x08 + +#define R7_TOP_HALF 0x00 +#define R7_BOTTOM_HALF 0x10 + +#define R7_REVEAL_OFF 0x00 +#define R7_REVEAL_ON 0x20 + +#define R7_CURSER_OFF 0x00 +#define R7_CURSER_ON 0x40 + +#define R7_STATUS_BOTTOM 0x00 +#define R7_STATUS_TOP 0x80 + +/* Register R8 (Active chapter) */ +#define R8_ACTIVE_CHAPTER_0 0x00 +#define R8_ACTIVE_CHAPTER_1 0x01 +#define R8_ACTIVE_CHAPTER_2 0x02 +#define R8_ACTIVE_CHAPTER_3 0x03 +#define R8_ACTIVE_CHAPTER_4 0x04 +#define R8_ACTIVE_CHAPTER_5 0x05 +#define R8_ACTIVE_CHAPTER_6 0x06 +#define R8_ACTIVE_CHAPTER_7 0x07 -static struct i2c_driver i2c_driver_videotext = +#define R8_CLEAR_MEMORY 0x08 +#define R8_DO_NOT_CLEAR_MEMORY 0x00 + +/* Register R9 (Curser row) */ +#define R9_CURSER_ROW_0 0x00 +#define R9_CURSER_ROW_1 0x01 +#define R9_CURSER_ROW_2 0x02 +#define R9_CURSER_ROW_25 0x19 + +/* Register R10 (Curser column) */ +#define R10_CURSER_COLUMN_0 0x00 +#define R10_CURSER_COLUMN_6 0x06 +#define R10_CURSER_COLUMN_8 0x08 + +/*****************************************************************************/ +/* Row 25 control data in column 0 to 9 */ +/*****************************************************************************/ +#define ROW25_COLUMN0_PAGE_UNITS 0x0F + +#define ROW25_COLUMN1_PAGE_TENS 0x0F + +#define ROW25_COLUMN2_MINUTES_UNITS 0x0F + +#define ROW25_COLUMN3_MINUTES_TENS 0x07 +#define ROW25_COLUMN3_DELETE_PAGE 0x08 + +#define ROW25_COLUMN4_HOUR_UNITS 0x0F + +#define ROW25_COLUMN5_HOUR_TENS 0x03 +#define ROW25_COLUMN5_INSERT_HEADLINE 0x04 +#define ROW25_COLUMN5_INSERT_SUBTITLE 0x08 + +#define ROW25_COLUMN6_SUPPRESS_HEADER 0x01 +#define ROW25_COLUMN6_UPDATE_PAGE 0x02 +#define ROW25_COLUMN6_INTERRUPTED_SEQUENCE 0x04 +#define ROW25_COLUMN6_SUPPRESS_DISPLAY 0x08 + +#define ROW25_COLUMN7_SERIAL_MODE 0x01 +#define ROW25_COLUMN7_CHARACTER_SET 0x0E + +#define ROW25_COLUMN8_PAGE_HUNDREDS 0x07 +#define ROW25_COLUMN8_PAGE_NOT_FOUND 0x10 + +#define ROW25_COLUMN9_PAGE_BEING_LOOKED_FOR 0x20 + +#define ROW25_COLUMN0_TO_7_HAMMING_ERROR 0x10 + +/*****************************************************************************/ +/* Helper macros for extracting page, hour and minute digits */ +/*****************************************************************************/ +/* BYTE_POS 0 is at row 0, column 0, + BYTE_POS 1 is at row 0, column 1, + BYTE_POS 40 is at row 1, column 0, (with NUM_ROWS_PER_PAGE = 40) + BYTE_POS 41 is at row 1, column 1, (with NUM_ROWS_PER_PAGE = 40), + ... */ +#define ROW(BYTE_POS) (BYTE_POS / NUM_ROWS_PER_PAGE) +#define COLUMN(BYTE_POS) (BYTE_POS % NUM_ROWS_PER_PAGE) + +/*****************************************************************************/ +/* Helper macros for extracting page, hour and minute digits */ +/*****************************************************************************/ +/* Macros for extracting hundreds, tens and units of a page number which + must be in the range 0 ... 0x799. + Note that page is coded in hexadecimal, i.e. 0x123 means page 123. + page 0x.. means page 8.. */ +#define HUNDREDS_OF_PAGE(page) (((page) / 0x100) & 0x7) +#define TENS_OF_PAGE(page) (((page) / 0x10) & 0xF) +#define UNITS_OF_PAGE(page) ((page) & 0xF) + +/* Macros for extracting tens and units of a hour information which + must be in the range 0 ... 0x24. + Note that hour is coded in hexadecimal, i.e. 0x12 means 12 hours */ +#define TENS_OF_HOUR(hour) ((hour) / 0x10) +#define UNITS_OF_HOUR(hour) ((hour) & 0xF) + +/* Macros for extracting tens and units of a minute information which + must be in the range 0 ... 0x59. + Note that minute is coded in hexadecimal, i.e. 0x12 means 12 minutes */ +#define TENS_OF_MINUTE(minute) ((minute) / 0x10) +#define UNITS_OF_MINUTE(minute) ((minute) & 0xF) + +#define HOUR_MAX 0x23 +#define MINUTE_MAX 0x59 +#define PAGE_MAX 0x8FF + + +struct saa5246a_device { - .driver = { - .name = IF_NAME, /* name */ - }, - .id = I2C_DRIVERID_SAA5249, /* in i2c.h */ - .attach_adapter = saa5246a_probe, - .detach_client = saa5246a_detach, + u8 pgbuf[NUM_DAUS][VTX_VIRTUALSIZE]; + int is_searching[NUM_DAUS]; + struct i2c_client *client; + unsigned long in_use; + struct mutex lock; }; -static struct i2c_client client_template = { - .driver = &i2c_driver_videotext, - .name = "(unset)", -}; +static struct video_device saa_template; /* Declared near bottom */ + +/* + * I2C interfaces + */ static int i2c_sendbuf(struct saa5246a_device *t, int reg, int count, u8 *data) { @@ -794,22 +1019,6 @@ static int saa5246a_release(struct inode *inode, struct file *file) return 0; } -static int __init init_saa_5246a (void) -{ - printk(KERN_INFO - "SAA5246A (or compatible) Teletext decoder driver version %d.%d\n", - MAJOR_VERSION, MINOR_VERSION); - return i2c_add_driver(&i2c_driver_videotext); -} - -static void __exit cleanup_saa_5246a (void) -{ - i2c_del_driver(&i2c_driver_videotext); -} - -module_init(init_saa_5246a); -module_exit(cleanup_saa_5246a); - static const struct file_operations saa_fops = { .owner = THIS_MODULE, .open = saa5246a_open, @@ -820,8 +1029,79 @@ static const struct file_operations saa_fops = { static struct video_device saa_template = { - .name = IF_NAME, + .name = "saa5246a", .fops = &saa_fops, .release = video_device_release, .minor = -1, }; + +/* Addresses to scan */ +static unsigned short normal_i2c[] = { 0x22 >> 1, I2C_CLIENT_END }; + +I2C_CLIENT_INSMOD; + +static int saa5246a_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + int pgbuf; + int err; + struct video_device *vd; + struct saa5246a_device *t; + + v4l_info(client, "chip found @ 0x%x (%s)\n", + client->addr << 1, client->adapter->name); + v4l_info(client, "VideoText version %d.%d\n", + MAJOR_VERSION, MINOR_VERSION); + t = kzalloc(sizeof(*t), GFP_KERNEL); + if (t == NULL) + return -ENOMEM; + mutex_init(&t->lock); + + /* Now create a video4linux device */ + vd = video_device_alloc(); + if (vd == NULL) { + kfree(t); + return -ENOMEM; + } + i2c_set_clientdata(client, vd); + memcpy(vd, &saa_template, sizeof(*vd)); + + for (pgbuf = 0; pgbuf < NUM_DAUS; pgbuf++) { + memset(t->pgbuf[pgbuf], ' ', sizeof(t->pgbuf[0])); + t->is_searching[pgbuf] = false; + } + video_set_drvdata(vd, t); + + /* Register it */ + err = video_register_device(vd, VFL_TYPE_VTX, -1); + if (err < 0) { + kfree(t); + video_device_release(vd); + return err; + } + t->client = client; + return 0; +} + +static int saa5246a_remove(struct i2c_client *client) +{ + struct video_device *vd = i2c_get_clientdata(client); + + video_unregister_device(vd); + kfree(video_get_drvdata(vd)); + return 0; +} + +static const struct i2c_device_id saa5246a_id[] = { + { "saa5246a", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, saa5246a_id); + +static struct v4l2_i2c_driver_data v4l2_i2c_data = { + .name = "saa5246a", + .driverid = I2C_DRIVERID_SAA5249, + .probe = saa5246a_probe, + .remove = saa5246a_remove, + .id_table = saa5246a_id, +}; diff --git a/drivers/media/video/saa5246a.h b/drivers/media/video/saa5246a.h deleted file mode 100644 index 64394c0..0000000 --- a/drivers/media/video/saa5246a.h +++ /dev/null @@ -1,359 +0,0 @@ -/* - Driver for the SAA5246A or SAA5281 Teletext (=Videotext) decoder chips from - Philips. - - Copyright (C) 2004 Michael Geng (linux@MichaelGeng.de) - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the Free Software - Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - - */ -#ifndef __SAA5246A_H__ -#define __SAA5246A_H__ - -#define MAJOR_VERSION 1 /* driver major version number */ -#define MINOR_VERSION 8 /* driver minor version number */ - -#define IF_NAME "SAA5246A" - -#define I2C_ADDRESS 17 - -/* Number of DAUs = number of pages that can be searched at the same time. */ -#define NUM_DAUS 4 - -#define NUM_ROWS_PER_PAGE 40 - -/* first column is 0 (not 1) */ -#define POS_TIME_START 32 -#define POS_TIME_END 39 - -#define POS_HEADER_START 7 -#define POS_HEADER_END 31 - -/* Returns 'true' if the part of the videotext page described with req contains - (at least parts of) the time field */ -#define REQ_CONTAINS_TIME(p_req) \ - ((p_req)->start <= POS_TIME_END && \ - (p_req)->end >= POS_TIME_START) - -/* Returns 'true' if the part of the videotext page described with req contains - (at least parts of) the page header */ -#define REQ_CONTAINS_HEADER(p_req) \ - ((p_req)->start <= POS_HEADER_END && \ - (p_req)->end >= POS_HEADER_START) - -/*****************************************************************************/ -/* Mode register numbers of the SAA5246A */ -/*****************************************************************************/ -#define SAA5246A_REGISTER_R0 0 -#define SAA5246A_REGISTER_R1 1 -#define SAA5246A_REGISTER_R2 2 -#define SAA5246A_REGISTER_R3 3 -#define SAA5246A_REGISTER_R4 4 -#define SAA5246A_REGISTER_R5 5 -#define SAA5246A_REGISTER_R6 6 -#define SAA5246A_REGISTER_R7 7 -#define SAA5246A_REGISTER_R8 8 -#define SAA5246A_REGISTER_R9 9 -#define SAA5246A_REGISTER_R10 10 -#define SAA5246A_REGISTER_R11 11 -#define SAA5246A_REGISTER_R11B 11 - -/* SAA5246A mode registers often autoincrement to the next register. - Therefore we use variable argument lists. The following macro indicates - the end of a command list. */ -#define COMMAND_END (- 1) - -/*****************************************************************************/ -/* Contents of the mode registers of the SAA5246A */ -/*****************************************************************************/ -/* Register R0 (Advanced Control) */ -#define R0_SELECT_R11 0x00 -#define R0_SELECT_R11B 0x01 - -#define R0_PLL_TIME_CONSTANT_LONG 0x00 -#define R0_PLL_TIME_CONSTANT_SHORT 0x02 - -#define R0_ENABLE_nODD_EVEN_OUTPUT 0x00 -#define R0_DISABLE_nODD_EVEN_OUTPUT 0x04 - -#define R0_ENABLE_HDR_POLL 0x00 -#define R0_DISABLE_HDR_POLL 0x10 - -#define R0_DO_NOT_FORCE_nODD_EVEN_LOW_IF_PICTURE_DISPLAYED 0x00 -#define R0_FORCE_nODD_EVEN_LOW_IF_PICTURE_DISPLAYED 0x20 - -#define R0_NO_FREE_RUN_PLL 0x00 -#define R0_FREE_RUN_PLL 0x40 - -#define R0_NO_AUTOMATIC_FASTEXT_PROMPT 0x00 -#define R0_AUTOMATIC_FASTEXT_PROMPT 0x80 - -/* Register R1 (Mode) */ -#define R1_INTERLACED_312_AND_HALF_312_AND_HALF_LINES 0x00 -#define R1_NON_INTERLACED_312_313_LINES 0x01 -#define R1_NON_INTERLACED_312_312_LINES 0x02 -#define R1_FFB_LEADING_EDGE_IN_FIRST_BROAD_PULSE 0x03 -#define R1_FFB_LEADING_EDGE_IN_SECOND_BROAD_PULSE 0x07 - -#define R1_DEW 0x00 -#define R1_FULL_FIELD 0x08 - -#define R1_EXTENDED_PACKET_DISABLE 0x00 -#define R1_EXTENDED_PACKET_ENABLE 0x10 - -#define R1_DAUS_ALL_ON 0x00 -#define R1_DAUS_ALL_OFF 0x20 - -#define R1_7_BITS_PLUS_PARITY 0x00 -#define R1_8_BITS_NO_PARITY 0x40 - -#define R1_VCS_TO_SCS 0x00 -#define R1_NO_VCS_TO_SCS 0x80 - -/* Register R2 (Page request address) */ -#define R2_IN_R3_SELECT_PAGE_HUNDREDS 0x00 -#define R2_IN_R3_SELECT_PAGE_TENS 0x01 -#define R2_IN_R3_SELECT_PAGE_UNITS 0x02 -#define R2_IN_R3_SELECT_HOURS_TENS 0x03 -#define R2_IN_R3_SELECT_HOURS_UNITS 0x04 -#define R2_IN_R3_SELECT_MINUTES_TENS 0x05 -#define R2_IN_R3_SELECT_MINUTES_UNITS 0x06 - -#define R2_DAU_0 0x00 -#define R2_DAU_1 0x10 -#define R2_DAU_2 0x20 -#define R2_DAU_3 0x30 - -#define R2_BANK_0 0x00 -#define R2_BANK 1 0x40 - -#define R2_HAMMING_CHECK_ON 0x80 -#define R2_HAMMING_CHECK_OFF 0x00 - -/* Register R3 (Page request data) */ -#define R3_PAGE_HUNDREDS_0 0x00 -#define R3_PAGE_HUNDREDS_1 0x01 -#define R3_PAGE_HUNDREDS_2 0x02 -#define R3_PAGE_HUNDREDS_3 0x03 -#define R3_PAGE_HUNDREDS_4 0x04 -#define R3_PAGE_HUNDREDS_5 0x05 -#define R3_PAGE_HUNDREDS_6 0x06 -#define R3_PAGE_HUNDREDS_7 0x07 - -#define R3_HOLD_PAGE 0x00 -#define R3_UPDATE_PAGE 0x08 - -#define R3_PAGE_HUNDREDS_DO_NOT_CARE 0x00 -#define R3_PAGE_HUNDREDS_DO_CARE 0x10 - -#define R3_PAGE_TENS_DO_NOT_CARE 0x00 -#define R3_PAGE_TENS_DO_CARE 0x10 - -#define R3_PAGE_UNITS_DO_NOT_CARE 0x00 -#define R3_PAGE_UNITS_DO_CARE 0x10 - -#define R3_HOURS_TENS_DO_NOT_CARE 0x00 -#define R3_HOURS_TENS_DO_CARE 0x10 - -#define R3_HOURS_UNITS_DO_NOT_CARE 0x00 -#define R3_HOURS_UNITS_DO_CARE 0x10 - -#define R3_MINUTES_TENS_DO_NOT_CARE 0x00 -#define R3_MINUTES_TENS_DO_CARE 0x10 - -#define R3_MINUTES_UNITS_DO_NOT_CARE 0x00 -#define R3_MINUTES_UNITS_DO_CARE 0x10 - -/* Register R4 (Display chapter) */ -#define R4_DISPLAY_PAGE_0 0x00 -#define R4_DISPLAY_PAGE_1 0x01 -#define R4_DISPLAY_PAGE_2 0x02 -#define R4_DISPLAY_PAGE_3 0x03 -#define R4_DISPLAY_PAGE_4 0x04 -#define R4_DISPLAY_PAGE_5 0x05 -#define R4_DISPLAY_PAGE_6 0x06 -#define R4_DISPLAY_PAGE_7 0x07 - -/* Register R5 (Normal display control) */ -#define R5_PICTURE_INSIDE_BOXING_OFF 0x00 -#define R5_PICTURE_INSIDE_BOXING_ON 0x01 - -#define R5_PICTURE_OUTSIDE_BOXING_OFF 0x00 -#define R5_PICTURE_OUTSIDE_BOXING_ON 0x02 - -#define R5_TEXT_INSIDE_BOXING_OFF 0x00 -#define R5_TEXT_INSIDE_BOXING_ON 0x04 - -#define R5_TEXT_OUTSIDE_BOXING_OFF 0x00 -#define R5_TEXT_OUTSIDE_BOXING_ON 0x08 - -#define R5_CONTRAST_REDUCTION_INSIDE_BOXING_OFF 0x00 -#define R5_CONTRAST_REDUCTION_INSIDE_BOXING_ON 0x10 - -#define R5_CONTRAST_REDUCTION_OUTSIDE_BOXING_OFF 0x00 -#define R5_CONTRAST_REDUCTION_OUTSIDE_BOXING_ON 0x20 - -#define R5_BACKGROUND_COLOR_INSIDE_BOXING_OFF 0x00 -#define R5_BACKGROUND_COLOR_INSIDE_BOXING_ON 0x40 - -#define R5_BACKGROUND_COLOR_OUTSIDE_BOXING_OFF 0x00 -#define R5_BACKGROUND_COLOR_OUTSIDE_BOXING_ON 0x80 - -/* Register R6 (Newsflash display) */ -#define R6_NEWSFLASH_PICTURE_INSIDE_BOXING_OFF 0x00 -#define R6_NEWSFLASH_PICTURE_INSIDE_BOXING_ON 0x01 - -#define R6_NEWSFLASH_PICTURE_OUTSIDE_BOXING_OFF 0x00 -#define R6_NEWSFLASH_PICTURE_OUTSIDE_BOXING_ON 0x02 - -#define R6_NEWSFLASH_TEXT_INSIDE_BOXING_OFF 0x00 -#define R6_NEWSFLASH_TEXT_INSIDE_BOXING_ON 0x04 - -#define R6_NEWSFLASH_TEXT_OUTSIDE_BOXING_OFF 0x00 -#define R6_NEWSFLASH_TEXT_OUTSIDE_BOXING_ON 0x08 - -#define R6_NEWSFLASH_CONTRAST_REDUCTION_INSIDE_BOXING_OFF 0x00 -#define R6_NEWSFLASH_CONTRAST_REDUCTION_INSIDE_BOXING_ON 0x10 - -#define R6_NEWSFLASH_CONTRAST_REDUCTION_OUTSIDE_BOXING_OFF 0x00 -#define R6_NEWSFLASH_CONTRAST_REDUCTION_OUTSIDE_BOXING_ON 0x20 - -#define R6_NEWSFLASH_BACKGROUND_COLOR_INSIDE_BOXING_OFF 0x00 -#define R6_NEWSFLASH_BACKGROUND_COLOR_INSIDE_BOXING_ON 0x40 - -#define R6_NEWSFLASH_BACKGROUND_COLOR_OUTSIDE_BOXING_OFF 0x00 -#define R6_NEWSFLASH_BACKGROUND_COLOR_OUTSIDE_BOXING_ON 0x80 - -/* Register R7 (Display mode) */ -#define R7_BOX_OFF_ROW_0 0x00 -#define R7_BOX_ON_ROW_0 0x01 - -#define R7_BOX_OFF_ROW_1_TO_23 0x00 -#define R7_BOX_ON_ROW_1_TO_23 0x02 - -#define R7_BOX_OFF_ROW_24 0x00 -#define R7_BOX_ON_ROW_24 0x04 - -#define R7_SINGLE_HEIGHT 0x00 -#define R7_DOUBLE_HEIGHT 0x08 - -#define R7_TOP_HALF 0x00 -#define R7_BOTTOM_HALF 0x10 - -#define R7_REVEAL_OFF 0x00 -#define R7_REVEAL_ON 0x20 - -#define R7_CURSER_OFF 0x00 -#define R7_CURSER_ON 0x40 - -#define R7_STATUS_BOTTOM 0x00 -#define R7_STATUS_TOP 0x80 - -/* Register R8 (Active chapter) */ -#define R8_ACTIVE_CHAPTER_0 0x00 -#define R8_ACTIVE_CHAPTER_1 0x01 -#define R8_ACTIVE_CHAPTER_2 0x02 -#define R8_ACTIVE_CHAPTER_3 0x03 -#define R8_ACTIVE_CHAPTER_4 0x04 -#define R8_ACTIVE_CHAPTER_5 0x05 -#define R8_ACTIVE_CHAPTER_6 0x06 -#define R8_ACTIVE_CHAPTER_7 0x07 - -#define R8_CLEAR_MEMORY 0x08 -#define R8_DO_NOT_CLEAR_MEMORY 0x00 - -/* Register R9 (Curser row) */ -#define R9_CURSER_ROW_0 0x00 -#define R9_CURSER_ROW_1 0x01 -#define R9_CURSER_ROW_2 0x02 -#define R9_CURSER_ROW_25 0x19 - -/* Register R10 (Curser column) */ -#define R10_CURSER_COLUMN_0 0x00 -#define R10_CURSER_COLUMN_6 0x06 -#define R10_CURSER_COLUMN_8 0x08 - -/*****************************************************************************/ -/* Row 25 control data in column 0 to 9 */ -/*****************************************************************************/ -#define ROW25_COLUMN0_PAGE_UNITS 0x0F - -#define ROW25_COLUMN1_PAGE_TENS 0x0F - -#define ROW25_COLUMN2_MINUTES_UNITS 0x0F - -#define ROW25_COLUMN3_MINUTES_TENS 0x07 -#define ROW25_COLUMN3_DELETE_PAGE 0x08 - -#define ROW25_COLUMN4_HOUR_UNITS 0x0F - -#define ROW25_COLUMN5_HOUR_TENS 0x03 -#define ROW25_COLUMN5_INSERT_HEADLINE 0x04 -#define ROW25_COLUMN5_INSERT_SUBTITLE 0x08 - -#define ROW25_COLUMN6_SUPPRESS_HEADER 0x01 -#define ROW25_COLUMN6_UPDATE_PAGE 0x02 -#define ROW25_COLUMN6_INTERRUPTED_SEQUENCE 0x04 -#define ROW25_COLUMN6_SUPPRESS_DISPLAY 0x08 - -#define ROW25_COLUMN7_SERIAL_MODE 0x01 -#define ROW25_COLUMN7_CHARACTER_SET 0x0E - -#define ROW25_COLUMN8_PAGE_HUNDREDS 0x07 -#define ROW25_COLUMN8_PAGE_NOT_FOUND 0x10 - -#define ROW25_COLUMN9_PAGE_BEING_LOOKED_FOR 0x20 - -#define ROW25_COLUMN0_TO_7_HAMMING_ERROR 0x10 - -/*****************************************************************************/ -/* Helper macros for extracting page, hour and minute digits */ -/*****************************************************************************/ -/* BYTE_POS 0 is at row 0, column 0, - BYTE_POS 1 is at row 0, column 1, - BYTE_POS 40 is at row 1, column 0, (with NUM_ROWS_PER_PAGE = 40) - BYTE_POS 41 is at row 1, column 1, (with NUM_ROWS_PER_PAGE = 40), - ... */ -#define ROW(BYTE_POS) (BYTE_POS / NUM_ROWS_PER_PAGE) -#define COLUMN(BYTE_POS) (BYTE_POS % NUM_ROWS_PER_PAGE) - -/*****************************************************************************/ -/* Helper macros for extracting page, hour and minute digits */ -/*****************************************************************************/ -/* Macros for extracting hundreds, tens and units of a page number which - must be in the range 0 ... 0x799. - Note that page is coded in hexadecimal, i.e. 0x123 means page 123. - page 0x.. means page 8.. */ -#define HUNDREDS_OF_PAGE(page) (((page) / 0x100) & 0x7) -#define TENS_OF_PAGE(page) (((page) / 0x10) & 0xF) -#define UNITS_OF_PAGE(page) ((page) & 0xF) - -/* Macros for extracting tens and units of a hour information which - must be in the range 0 ... 0x24. - Note that hour is coded in hexadecimal, i.e. 0x12 means 12 hours */ -#define TENS_OF_HOUR(hour) ((hour) / 0x10) -#define UNITS_OF_HOUR(hour) ((hour) & 0xF) - -/* Macros for extracting tens and units of a minute information which - must be in the range 0 ... 0x59. - Note that minute is coded in hexadecimal, i.e. 0x12 means 12 minutes */ -#define TENS_OF_MINUTE(minute) ((minute) / 0x10) -#define UNITS_OF_MINUTE(minute) ((minute) & 0xF) - -#define HOUR_MAX 0x23 -#define MINUTE_MAX 0x59 -#define PAGE_MAX 0x8FF - -#endif /* __SAA5246A_H__ */ -- cgit v0.10.2 From 96af9880c0d38fa6f331d1dd4cd39c5f5227fbbf Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Sun, 7 Sep 2008 08:31:38 -0300 Subject: V4L/DVB (8944): saa5249: convert i2c driver for new i2c API - Convert to use v4l2-i2c-drv-legacy.h to be able to handle the new i2c API - Cleanups - Use v4l_dbg/v4l_info to have uniform kernel messages Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/saa5249.c b/drivers/media/video/saa5249.c index 8517aa4f..421071c 100644 --- a/drivers/media/video/saa5249.c +++ b/drivers/media/video/saa5249.c @@ -15,8 +15,6 @@ * * Copyright (c) 1998 Richard Guenther * - * $Id: saa5249.c,v 1.1 1998/03/30 22:23:23 alan Exp $ - * * Derived From * * vtx.c: @@ -45,34 +43,27 @@ #include #include -#include #include -#include -#include -#include -#include #include -#include -#include #include +#include +#include #include #include #include #include -#include - +#include -#include -#include +MODULE_AUTHOR("Michael Geng "); +MODULE_DESCRIPTION("Philips SAA5249 Teletext decoder driver"); +MODULE_LICENSE("GPL"); #define VTX_VER_MAJ 1 #define VTX_VER_MIN 8 - #define NUM_DAUS 4 #define NUM_BUFS 8 -#define IF_NAME "SAA5249" static const int disp_modes[8][3] = { @@ -125,125 +116,8 @@ struct saa5249_device #define VTX_DEV_MINOR 0 -/* General defines and debugging support */ - -#define RESCHED do { cond_resched(); } while(0) - static struct video_device saa_template; /* Declared near bottom */ -/* Addresses to scan */ -static unsigned short normal_i2c[] = {34>>1,I2C_CLIENT_END}; - -I2C_CLIENT_INSMOD; - -static struct i2c_client client_template; - -static int saa5249_attach(struct i2c_adapter *adap, int addr, int kind) -{ - int pgbuf; - int err; - struct i2c_client *client; - struct video_device *vd; - struct saa5249_device *t; - - printk(KERN_INFO "saa5249: teletext chip found.\n"); - client=kmalloc(sizeof(*client), GFP_KERNEL); - if(client==NULL) - return -ENOMEM; - client_template.adapter = adap; - client_template.addr = addr; - memcpy(client, &client_template, sizeof(*client)); - t = kzalloc(sizeof(*t), GFP_KERNEL); - if(t==NULL) - { - kfree(client); - return -ENOMEM; - } - strlcpy(client->name, IF_NAME, I2C_NAME_SIZE); - mutex_init(&t->lock); - - /* - * Now create a video4linux device - */ - - vd = kmalloc(sizeof(struct video_device), GFP_KERNEL); - if(vd==NULL) - { - kfree(t); - kfree(client); - return -ENOMEM; - } - i2c_set_clientdata(client, vd); - memcpy(vd, &saa_template, sizeof(*vd)); - - for (pgbuf = 0; pgbuf < NUM_DAUS; pgbuf++) - { - memset(t->vdau[pgbuf].pgbuf, ' ', sizeof(t->vdau[0].pgbuf)); - memset(t->vdau[pgbuf].sregs, 0, sizeof(t->vdau[0].sregs)); - memset(t->vdau[pgbuf].laststat, 0, sizeof(t->vdau[0].laststat)); - t->vdau[pgbuf].expire = 0; - t->vdau[pgbuf].clrfound = true; - t->vdau[pgbuf].stopped = true; - t->is_searching[pgbuf] = false; - } - video_set_drvdata(vd, t); - - - /* - * Register it - */ - - if((err=video_register_device(vd, VFL_TYPE_VTX,-1))<0) - { - kfree(t); - kfree(vd); - kfree(client); - return err; - } - t->client = client; - i2c_attach_client(client); - return 0; -} - -/* - * We do most of the hard work when we become a device on the i2c. - */ - -static int saa5249_probe(struct i2c_adapter *adap) -{ - if (adap->class & I2C_CLASS_TV_ANALOG) - return i2c_probe(adap, &addr_data, saa5249_attach); - return 0; -} - -static int saa5249_detach(struct i2c_client *client) -{ - struct video_device *vd = i2c_get_clientdata(client); - i2c_detach_client(client); - video_unregister_device(vd); - kfree(video_get_drvdata(vd)); - kfree(vd); - kfree(client); - return 0; -} - -/* new I2C driver support */ - -static struct i2c_driver i2c_driver_videotext = -{ - .driver = { - .name = IF_NAME, /* name */ - }, - .id = I2C_DRIVERID_SAA5249, /* in i2c.h */ - .attach_adapter = saa5249_probe, - .detach_client = saa5249_detach, -}; - -static struct i2c_client client_template = { - .driver = &i2c_driver_videotext, - .name = "(unset)", -}; - /* * Wait the given number of jiffies (10ms). This calls the scheduler, so the actual * delay may be longer. @@ -277,7 +151,7 @@ static int i2c_sendbuf(struct saa5249_device *t, int reg, int count, u8 *data) buf[0] = reg; memcpy(buf+1, data, count); - if(i2c_master_send(t->client, buf, count+1)==count+1) + if (i2c_master_send(t->client, buf, count + 1) == count + 1) return 0; return -1; } @@ -321,243 +195,234 @@ static int do_saa5249_ioctl(struct inode *inode, struct file *file, static int virtual_mode = false; struct saa5249_device *t = video_drvdata(file); - switch(cmd) + switch (cmd) { + case VTXIOCGETINFO: { - case VTXIOCGETINFO: - { - vtx_info_t *info = arg; - info->version_major = VTX_VER_MAJ; - info->version_minor = VTX_VER_MIN; - info->numpages = NUM_DAUS; - /*info->cct_type = CCT_TYPE;*/ - return 0; - } + vtx_info_t *info = arg; + info->version_major = VTX_VER_MAJ; + info->version_minor = VTX_VER_MIN; + info->numpages = NUM_DAUS; + /*info->cct_type = CCT_TYPE;*/ + return 0; + } - case VTXIOCCLRPAGE: - { - vtx_pagereq_t *req = arg; + case VTXIOCCLRPAGE: + { + vtx_pagereq_t *req = arg; - if (req->pgbuf < 0 || req->pgbuf >= NUM_DAUS) - return -EINVAL; - memset(t->vdau[req->pgbuf].pgbuf, ' ', sizeof(t->vdau[0].pgbuf)); - t->vdau[req->pgbuf].clrfound = true; - return 0; - } + if (req->pgbuf < 0 || req->pgbuf >= NUM_DAUS) + return -EINVAL; + memset(t->vdau[req->pgbuf].pgbuf, ' ', sizeof(t->vdau[0].pgbuf)); + t->vdau[req->pgbuf].clrfound = true; + return 0; + } - case VTXIOCCLRFOUND: - { - vtx_pagereq_t *req = arg; + case VTXIOCCLRFOUND: + { + vtx_pagereq_t *req = arg; - if (req->pgbuf < 0 || req->pgbuf >= NUM_DAUS) - return -EINVAL; - t->vdau[req->pgbuf].clrfound = true; - return 0; - } + if (req->pgbuf < 0 || req->pgbuf >= NUM_DAUS) + return -EINVAL; + t->vdau[req->pgbuf].clrfound = true; + return 0; + } - case VTXIOCPAGEREQ: - { - vtx_pagereq_t *req = arg; - if (!(req->pagemask & PGMASK_PAGE)) - req->page = 0; - if (!(req->pagemask & PGMASK_HOUR)) - req->hour = 0; - if (!(req->pagemask & PGMASK_MINUTE)) - req->minute = 0; - if (req->page < 0 || req->page > 0x8ff) /* 7FF ?? */ - return -EINVAL; - req->page &= 0x7ff; - if (req->hour < 0 || req->hour > 0x3f || req->minute < 0 || req->minute > 0x7f || - req->pagemask < 0 || req->pagemask >= PGMASK_MAX || req->pgbuf < 0 || req->pgbuf >= NUM_DAUS) - return -EINVAL; - t->vdau[req->pgbuf].sregs[0] = (req->pagemask & PG_HUND ? 0x10 : 0) | (req->page / 0x100); - t->vdau[req->pgbuf].sregs[1] = (req->pagemask & PG_TEN ? 0x10 : 0) | ((req->page / 0x10) & 0xf); - t->vdau[req->pgbuf].sregs[2] = (req->pagemask & PG_UNIT ? 0x10 : 0) | (req->page & 0xf); - t->vdau[req->pgbuf].sregs[3] = (req->pagemask & HR_TEN ? 0x10 : 0) | (req->hour / 0x10); - t->vdau[req->pgbuf].sregs[4] = (req->pagemask & HR_UNIT ? 0x10 : 0) | (req->hour & 0xf); - t->vdau[req->pgbuf].sregs[5] = (req->pagemask & MIN_TEN ? 0x10 : 0) | (req->minute / 0x10); - t->vdau[req->pgbuf].sregs[6] = (req->pagemask & MIN_UNIT ? 0x10 : 0) | (req->minute & 0xf); - t->vdau[req->pgbuf].stopped = false; - t->vdau[req->pgbuf].clrfound = true; - t->is_searching[req->pgbuf] = true; - return 0; - } + case VTXIOCPAGEREQ: + { + vtx_pagereq_t *req = arg; + if (!(req->pagemask & PGMASK_PAGE)) + req->page = 0; + if (!(req->pagemask & PGMASK_HOUR)) + req->hour = 0; + if (!(req->pagemask & PGMASK_MINUTE)) + req->minute = 0; + if (req->page < 0 || req->page > 0x8ff) /* 7FF ?? */ + return -EINVAL; + req->page &= 0x7ff; + if (req->hour < 0 || req->hour > 0x3f || req->minute < 0 || req->minute > 0x7f || + req->pagemask < 0 || req->pagemask >= PGMASK_MAX || req->pgbuf < 0 || req->pgbuf >= NUM_DAUS) + return -EINVAL; + t->vdau[req->pgbuf].sregs[0] = (req->pagemask & PG_HUND ? 0x10 : 0) | (req->page / 0x100); + t->vdau[req->pgbuf].sregs[1] = (req->pagemask & PG_TEN ? 0x10 : 0) | ((req->page / 0x10) & 0xf); + t->vdau[req->pgbuf].sregs[2] = (req->pagemask & PG_UNIT ? 0x10 : 0) | (req->page & 0xf); + t->vdau[req->pgbuf].sregs[3] = (req->pagemask & HR_TEN ? 0x10 : 0) | (req->hour / 0x10); + t->vdau[req->pgbuf].sregs[4] = (req->pagemask & HR_UNIT ? 0x10 : 0) | (req->hour & 0xf); + t->vdau[req->pgbuf].sregs[5] = (req->pagemask & MIN_TEN ? 0x10 : 0) | (req->minute / 0x10); + t->vdau[req->pgbuf].sregs[6] = (req->pagemask & MIN_UNIT ? 0x10 : 0) | (req->minute & 0xf); + t->vdau[req->pgbuf].stopped = false; + t->vdau[req->pgbuf].clrfound = true; + t->is_searching[req->pgbuf] = true; + return 0; + } - case VTXIOCGETSTAT: - { - vtx_pagereq_t *req = arg; - u8 infobits[10]; - vtx_pageinfo_t info; - int a; - - if (req->pgbuf < 0 || req->pgbuf >= NUM_DAUS) - return -EINVAL; - if (!t->vdau[req->pgbuf].stopped) - { - if (i2c_senddata(t, 2, 0, -1) || - i2c_sendbuf(t, 3, sizeof(t->vdau[0].sregs), t->vdau[req->pgbuf].sregs) || - i2c_senddata(t, 8, 0, 25, 0, ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', -1) || - i2c_senddata(t, 2, 0, t->vdau[req->pgbuf].sregs[0] | 8, -1) || - i2c_senddata(t, 8, 0, 25, 0, -1)) - return -EIO; - jdelay(PAGE_WAIT); - if (i2c_getdata(t, 10, infobits)) - return -EIO; + case VTXIOCGETSTAT: + { + vtx_pagereq_t *req = arg; + u8 infobits[10]; + vtx_pageinfo_t info; + int a; + + if (req->pgbuf < 0 || req->pgbuf >= NUM_DAUS) + return -EINVAL; + if (!t->vdau[req->pgbuf].stopped) { + if (i2c_senddata(t, 2, 0, -1) || + i2c_sendbuf(t, 3, sizeof(t->vdau[0].sregs), t->vdau[req->pgbuf].sregs) || + i2c_senddata(t, 8, 0, 25, 0, ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', -1) || + i2c_senddata(t, 2, 0, t->vdau[req->pgbuf].sregs[0] | 8, -1) || + i2c_senddata(t, 8, 0, 25, 0, -1)) + return -EIO; + jdelay(PAGE_WAIT); + if (i2c_getdata(t, 10, infobits)) + return -EIO; - if (!(infobits[8] & 0x10) && !(infobits[7] & 0xf0) && /* check FOUND-bit */ - (memcmp(infobits, t->vdau[req->pgbuf].laststat, sizeof(infobits)) || - time_after_eq(jiffies, t->vdau[req->pgbuf].expire))) - { /* check if new page arrived */ - if (i2c_senddata(t, 8, 0, 0, 0, -1) || - i2c_getdata(t, VTX_PAGESIZE, t->vdau[req->pgbuf].pgbuf)) + if (!(infobits[8] & 0x10) && !(infobits[7] & 0xf0) && /* check FOUND-bit */ + (memcmp(infobits, t->vdau[req->pgbuf].laststat, sizeof(infobits)) || + time_after_eq(jiffies, t->vdau[req->pgbuf].expire))) + { /* check if new page arrived */ + if (i2c_senddata(t, 8, 0, 0, 0, -1) || + i2c_getdata(t, VTX_PAGESIZE, t->vdau[req->pgbuf].pgbuf)) + return -EIO; + t->vdau[req->pgbuf].expire = jiffies + PGBUF_EXPIRE; + memset(t->vdau[req->pgbuf].pgbuf + VTX_PAGESIZE, ' ', VTX_VIRTUALSIZE - VTX_PAGESIZE); + if (t->virtual_mode) { + /* Packet X/24 */ + if (i2c_senddata(t, 8, 0, 0x20, 0, -1) || + i2c_getdata(t, 40, t->vdau[req->pgbuf].pgbuf + VTX_PAGESIZE + 20 * 40)) + return -EIO; + /* Packet X/27/0 */ + if (i2c_senddata(t, 8, 0, 0x21, 0, -1) || + i2c_getdata(t, 40, t->vdau[req->pgbuf].pgbuf + VTX_PAGESIZE + 16 * 40)) + return -EIO; + /* Packet 8/30/0...8/30/15 + * FIXME: AFAIK, the 5249 does hamming-decoding for some bytes in packet 8/30, + * so we should undo this here. + */ + if (i2c_senddata(t, 8, 0, 0x22, 0, -1) || + i2c_getdata(t, 40, t->vdau[req->pgbuf].pgbuf + VTX_PAGESIZE + 23 * 40)) return -EIO; - t->vdau[req->pgbuf].expire = jiffies + PGBUF_EXPIRE; - memset(t->vdau[req->pgbuf].pgbuf + VTX_PAGESIZE, ' ', VTX_VIRTUALSIZE - VTX_PAGESIZE); - if (t->virtual_mode) - { - /* Packet X/24 */ - if (i2c_senddata(t, 8, 0, 0x20, 0, -1) || - i2c_getdata(t, 40, t->vdau[req->pgbuf].pgbuf + VTX_PAGESIZE + 20 * 40)) - return -EIO; - /* Packet X/27/0 */ - if (i2c_senddata(t, 8, 0, 0x21, 0, -1) || - i2c_getdata(t, 40, t->vdau[req->pgbuf].pgbuf + VTX_PAGESIZE + 16 * 40)) - return -EIO; - /* Packet 8/30/0...8/30/15 - * FIXME: AFAIK, the 5249 does hamming-decoding for some bytes in packet 8/30, - * so we should undo this here. - */ - if (i2c_senddata(t, 8, 0, 0x22, 0, -1) || - i2c_getdata(t, 40, t->vdau[req->pgbuf].pgbuf + VTX_PAGESIZE + 23 * 40)) - return -EIO; - } - t->vdau[req->pgbuf].clrfound = false; - memcpy(t->vdau[req->pgbuf].laststat, infobits, sizeof(infobits)); - } - else - { - memcpy(infobits, t->vdau[req->pgbuf].laststat, sizeof(infobits)); } - } - else - { + t->vdau[req->pgbuf].clrfound = false; + memcpy(t->vdau[req->pgbuf].laststat, infobits, sizeof(infobits)); + } else { memcpy(infobits, t->vdau[req->pgbuf].laststat, sizeof(infobits)); } + } else { + memcpy(infobits, t->vdau[req->pgbuf].laststat, sizeof(infobits)); + } - info.pagenum = ((infobits[8] << 8) & 0x700) | ((infobits[1] << 4) & 0xf0) | (infobits[0] & 0x0f); - if (info.pagenum < 0x100) - info.pagenum += 0x800; - info.hour = ((infobits[5] << 4) & 0x30) | (infobits[4] & 0x0f); - info.minute = ((infobits[3] << 4) & 0x70) | (infobits[2] & 0x0f); - info.charset = ((infobits[7] >> 1) & 7); - info.delete = !!(infobits[3] & 8); - info.headline = !!(infobits[5] & 4); - info.subtitle = !!(infobits[5] & 8); - info.supp_header = !!(infobits[6] & 1); - info.update = !!(infobits[6] & 2); - info.inter_seq = !!(infobits[6] & 4); - info.dis_disp = !!(infobits[6] & 8); - info.serial = !!(infobits[7] & 1); - info.notfound = !!(infobits[8] & 0x10); - info.pblf = !!(infobits[9] & 0x20); - info.hamming = 0; - for (a = 0; a <= 7; a++) - { - if (infobits[a] & 0xf0) - { - info.hamming = 1; - break; - } - } - if (t->vdau[req->pgbuf].clrfound) - info.notfound = 1; - if(copy_to_user(req->buffer, &info, sizeof(vtx_pageinfo_t))) - return -EFAULT; - if (!info.hamming && !info.notfound) - { - t->is_searching[req->pgbuf] = false; + info.pagenum = ((infobits[8] << 8) & 0x700) | ((infobits[1] << 4) & 0xf0) | (infobits[0] & 0x0f); + if (info.pagenum < 0x100) + info.pagenum += 0x800; + info.hour = ((infobits[5] << 4) & 0x30) | (infobits[4] & 0x0f); + info.minute = ((infobits[3] << 4) & 0x70) | (infobits[2] & 0x0f); + info.charset = ((infobits[7] >> 1) & 7); + info.delete = !!(infobits[3] & 8); + info.headline = !!(infobits[5] & 4); + info.subtitle = !!(infobits[5] & 8); + info.supp_header = !!(infobits[6] & 1); + info.update = !!(infobits[6] & 2); + info.inter_seq = !!(infobits[6] & 4); + info.dis_disp = !!(infobits[6] & 8); + info.serial = !!(infobits[7] & 1); + info.notfound = !!(infobits[8] & 0x10); + info.pblf = !!(infobits[9] & 0x20); + info.hamming = 0; + for (a = 0; a <= 7; a++) { + if (infobits[a] & 0xf0) { + info.hamming = 1; + break; } - return 0; } + if (t->vdau[req->pgbuf].clrfound) + info.notfound = 1; + if (copy_to_user(req->buffer, &info, sizeof(vtx_pageinfo_t))) + return -EFAULT; + if (!info.hamming && !info.notfound) + t->is_searching[req->pgbuf] = false; + return 0; + } - case VTXIOCGETPAGE: - { - vtx_pagereq_t *req = arg; - int start, end; - - if (req->pgbuf < 0 || req->pgbuf >= NUM_DAUS || req->start < 0 || - req->start > req->end || req->end >= (virtual_mode ? VTX_VIRTUALSIZE : VTX_PAGESIZE)) - return -EINVAL; - if(copy_to_user(req->buffer, &t->vdau[req->pgbuf].pgbuf[req->start], req->end - req->start + 1)) + case VTXIOCGETPAGE: + { + vtx_pagereq_t *req = arg; + int start, end; + + if (req->pgbuf < 0 || req->pgbuf >= NUM_DAUS || req->start < 0 || + req->start > req->end || req->end >= (virtual_mode ? VTX_VIRTUALSIZE : VTX_PAGESIZE)) + return -EINVAL; + if (copy_to_user(req->buffer, &t->vdau[req->pgbuf].pgbuf[req->start], req->end - req->start + 1)) + return -EFAULT; + + /* + * Always read the time directly from SAA5249 + */ + + if (req->start <= 39 && req->end >= 32) { + int len; + char buf[16]; + start = max(req->start, 32); + end = min(req->end, 39); + len = end - start + 1; + if (i2c_senddata(t, 8, 0, 0, start, -1) || + i2c_getdata(t, len, buf)) + return -EIO; + if (copy_to_user(req->buffer + start - req->start, buf, len)) + return -EFAULT; + } + /* Insert the current header if DAU is still searching for a page */ + if (req->start <= 31 && req->end >= 7 && t->is_searching[req->pgbuf]) { + char buf[32]; + int len; + + start = max(req->start, 7); + end = min(req->end, 31); + len = end - start + 1; + if (i2c_senddata(t, 8, 0, 0, start, -1) || + i2c_getdata(t, len, buf)) + return -EIO; + if (copy_to_user(req->buffer + start - req->start, buf, len)) return -EFAULT; - - /* - * Always read the time directly from SAA5249 - */ - - if (req->start <= 39 && req->end >= 32) - { - int len; - char buf[16]; - start = max(req->start, 32); - end = min(req->end, 39); - len=end-start+1; - if (i2c_senddata(t, 8, 0, 0, start, -1) || - i2c_getdata(t, len, buf)) - return -EIO; - if(copy_to_user(req->buffer+start-req->start, buf, len)) - return -EFAULT; - } - /* Insert the current header if DAU is still searching for a page */ - if (req->start <= 31 && req->end >= 7 && t->is_searching[req->pgbuf]) - { - char buf[32]; - int len; - start = max(req->start, 7); - end = min(req->end, 31); - len=end-start+1; - if (i2c_senddata(t, 8, 0, 0, start, -1) || - i2c_getdata(t, len, buf)) - return -EIO; - if(copy_to_user(req->buffer+start-req->start, buf, len)) - return -EFAULT; - } - return 0; } + return 0; + } - case VTXIOCSTOPDAU: - { - vtx_pagereq_t *req = arg; + case VTXIOCSTOPDAU: + { + vtx_pagereq_t *req = arg; - if (req->pgbuf < 0 || req->pgbuf >= NUM_DAUS) - return -EINVAL; - t->vdau[req->pgbuf].stopped = true; - t->is_searching[req->pgbuf] = false; - return 0; - } + if (req->pgbuf < 0 || req->pgbuf >= NUM_DAUS) + return -EINVAL; + t->vdau[req->pgbuf].stopped = true; + t->is_searching[req->pgbuf] = false; + return 0; + } - case VTXIOCPUTPAGE: - case VTXIOCSETDISP: - case VTXIOCPUTSTAT: - return 0; + case VTXIOCPUTPAGE: + case VTXIOCSETDISP: + case VTXIOCPUTSTAT: + return 0; - case VTXIOCCLRCACHE: - { - if (i2c_senddata(t, 0, NUM_DAUS, 0, 8, -1) || i2c_senddata(t, 11, - ' ',' ',' ',' ',' ',' ',' ',' ',' ',' ',' ',' ', - ' ',' ',' ',' ',' ',' ',' ',' ',' ',' ',' ',' ', -1)) - return -EIO; - if (i2c_senddata(t, 3, 0x20, -1)) - return -EIO; - jdelay(10 * CLEAR_DELAY); /* I have no idea how long we have to wait here */ - return 0; - } + case VTXIOCCLRCACHE: + { + if (i2c_senddata(t, 0, NUM_DAUS, 0, 8, -1) || i2c_senddata(t, 11, + ' ', ' ', ' ', ' ', ' ', ' ', + ' ', ' ', ' ', ' ', ' ', ' ', + ' ', ' ', ' ', ' ', ' ', ' ', + ' ', ' ', ' ', ' ', ' ', ' ', + -1)) + return -EIO; + if (i2c_senddata(t, 3, 0x20, -1)) + return -EIO; + jdelay(10 * CLEAR_DELAY); /* I have no idea how long we have to wait here */ + return 0; + } - case VTXIOCSETVIRT: - { - /* The SAA5249 has virtual-row reception turned on always */ - t->virtual_mode = (int)(long)arg; - return 0; - } + case VTXIOCSETVIRT: + { + /* The SAA5249 has virtual-row reception turned on always */ + t->virtual_mode = (int)(long)arg; + return 0; + } } return -EINVAL; } @@ -674,21 +539,6 @@ static int saa5249_release(struct inode *inode, struct file *file) return 0; } -static int __init init_saa_5249 (void) -{ - printk(KERN_INFO "SAA5249 driver (" IF_NAME " interface) for VideoText version %d.%d\n", - VTX_VER_MAJ, VTX_VER_MIN); - return i2c_add_driver(&i2c_driver_videotext); -} - -static void __exit cleanup_saa_5249 (void) -{ - i2c_del_driver(&i2c_driver_videotext); -} - -module_init(init_saa_5249); -module_exit(cleanup_saa_5249); - static const struct file_operations saa_fops = { .owner = THIS_MODULE, .open = saa5249_open, @@ -702,9 +552,84 @@ static const struct file_operations saa_fops = { static struct video_device saa_template = { - .name = IF_NAME, + .name = "saa5249", .fops = &saa_fops, .release = video_device_release, }; -MODULE_LICENSE("GPL"); +/* Addresses to scan */ +static unsigned short normal_i2c[] = { 0x22 >> 1, I2C_CLIENT_END }; + +I2C_CLIENT_INSMOD; + +static int saa5249_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + int pgbuf; + int err; + struct video_device *vd; + struct saa5249_device *t; + + v4l_info(client, "chip found @ 0x%x (%s)\n", + client->addr << 1, client->adapter->name); + v4l_info(client, "VideoText version %d.%d\n", + VTX_VER_MAJ, VTX_VER_MIN); + t = kzalloc(sizeof(*t), GFP_KERNEL); + if (t == NULL) + return -ENOMEM; + mutex_init(&t->lock); + + /* Now create a video4linux device */ + vd = kmalloc(sizeof(struct video_device), GFP_KERNEL); + if (vd == NULL) { + kfree(client); + return -ENOMEM; + } + i2c_set_clientdata(client, vd); + memcpy(vd, &saa_template, sizeof(*vd)); + + for (pgbuf = 0; pgbuf < NUM_DAUS; pgbuf++) { + memset(t->vdau[pgbuf].pgbuf, ' ', sizeof(t->vdau[0].pgbuf)); + memset(t->vdau[pgbuf].sregs, 0, sizeof(t->vdau[0].sregs)); + memset(t->vdau[pgbuf].laststat, 0, sizeof(t->vdau[0].laststat)); + t->vdau[pgbuf].expire = 0; + t->vdau[pgbuf].clrfound = true; + t->vdau[pgbuf].stopped = true; + t->is_searching[pgbuf] = false; + } + video_set_drvdata(vd, t); + + /* Register it */ + err = video_register_device(vd, VFL_TYPE_VTX, -1); + if (err < 0) { + kfree(t); + kfree(vd); + return err; + } + t->client = client; + return 0; +} + +static int saa5249_remove(struct i2c_client *client) +{ + struct video_device *vd = i2c_get_clientdata(client); + + video_unregister_device(vd); + kfree(video_get_drvdata(vd)); + kfree(vd); + return 0; +} + +static const struct i2c_device_id saa5249_id[] = { + { "saa5249", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, saa5249_id); + +static struct v4l2_i2c_driver_data v4l2_i2c_data = { + .name = "saa5249", + .driverid = I2C_DRIVERID_SAA5249, + .probe = saa5249_probe, + .remove = saa5249_remove, + .id_table = saa5249_id, +}; -- cgit v0.10.2 From 9ebeae5641b141a71ed442e9fcb4993f6c0cd04f Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Sun, 7 Sep 2008 08:32:44 -0300 Subject: V4L/DVB (8945): mxb: use unique i2c adapter name Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/mxb.c b/drivers/media/video/mxb.c index b2dae50..7f13028 100644 --- a/drivers/media/video/mxb.c +++ b/drivers/media/video/mxb.c @@ -215,9 +215,10 @@ static int mxb_probe(struct saa7146_dev* dev) mxb->i2c_adapter = (struct i2c_adapter) { .class = I2C_CLASS_TV_ANALOG, - .name = "mxb", }; + snprintf(mxb->i2c_adapter.name, sizeof(mxb->i2c_adapter.name), "mxb%d", mxb_num); + saa7146_i2c_adapter_prepare(dev, &mxb->i2c_adapter, SAA7146_I2C_BUS_BIT_RATE_480); if(i2c_add_adapter(&mxb->i2c_adapter) < 0) { DEB_S(("cannot register i2c-device. skipping.\n")); -- cgit v0.10.2 From 942648af36e4d4b91e52b3e1a87d4cafd6f7aa46 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Sun, 7 Sep 2008 08:38:50 -0300 Subject: V4L/DVB (8946): dib7000m: fix powerpc build error The dib7000m_i2c_enumeration() function is not used by any public drivers, however some prototype board use it. So '#if 0' for now, but don't remove it. Thanks to Patrick Boettcher for clarifying this. Cc: Patrick Boettcher Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/dvb/frontends/dib7000m.c b/drivers/media/dvb/frontends/dib7000m.c index 4de0fa9..0109720 100644 --- a/drivers/media/dvb/frontends/dib7000m.c +++ b/drivers/media/dvb/frontends/dib7000m.c @@ -1284,7 +1284,9 @@ struct i2c_adapter * dib7000m_get_i2c_master(struct dvb_frontend *demod, enum di } EXPORT_SYMBOL(dib7000m_get_i2c_master); -static int dib7000m_i2c_enumeration(struct i2c_adapter *i2c, int no_of_demods, +#if 0 +/* used with some prototype boards */ +int dib7000m_i2c_enumeration(struct i2c_adapter *i2c, int no_of_demods, u8 default_addr, struct dib7000m_config cfg[]) { struct dib7000m_state st = { .i2c_adap = i2c }; @@ -1330,6 +1332,7 @@ static int dib7000m_i2c_enumeration(struct i2c_adapter *i2c, int no_of_demods, return 0; } EXPORT_SYMBOL(dib7000m_i2c_enumeration); +#endif static struct dvb_frontend_ops dib7000m_ops; struct dvb_frontend * dib7000m_attach(struct i2c_adapter *i2c_adap, u8 i2c_addr, struct dib7000m_config *cfg) -- cgit v0.10.2 From ffb412346bcebf143d0f43ab4c6a61c4270a9266 Mon Sep 17 00:00:00 2001 From: Michael Krufky Date: Sat, 6 Sep 2008 10:52:30 -0300 Subject: V4L/DVB (8948): xc5000: kill xc5000_priv.h move struct xc5000_priv into xc5000.c and delete xc5000_priv.h Signed-off-by: Michael Krufky Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/common/tuners/xc5000.c b/drivers/media/common/tuners/xc5000.c index dcddfa8..50d42c8 100644 --- a/drivers/media/common/tuners/xc5000.c +++ b/drivers/media/common/tuners/xc5000.c @@ -30,7 +30,6 @@ #include "dvb_frontend.h" #include "xc5000.h" -#include "xc5000_priv.h" static int debug; module_param(debug, int, 0644); @@ -46,6 +45,18 @@ MODULE_PARM_DESC(init_fw, "Load firmware during driver initialization."); #define XC5000_DEFAULT_FIRMWARE "dvb-fe-xc5000-1.1.fw" #define XC5000_DEFAULT_FIRMWARE_SIZE 12332 +struct xc5000_priv { + struct xc5000_config *cfg; + struct i2c_adapter *i2c; + + u32 freq_hz; + u32 bandwidth; + u8 video_standard; + u8 rf_mode; + + void *devptr; +}; + /* Misc Defines */ #define MAX_TV_STANDARD 23 #define XC_MAX_I2C_WRITE_LENGTH 64 diff --git a/drivers/media/common/tuners/xc5000_priv.h b/drivers/media/common/tuners/xc5000_priv.h deleted file mode 100644 index b2a0074..0000000 --- a/drivers/media/common/tuners/xc5000_priv.h +++ /dev/null @@ -1,37 +0,0 @@ -/* - * Driver for Xceive XC5000 "QAM/8VSB single chip tuner" - * - * Copyright (c) 2007 Steven Toth - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#ifndef XC5000_PRIV_H -#define XC5000_PRIV_H - -struct xc5000_priv { - struct xc5000_config *cfg; - struct i2c_adapter *i2c; - - u32 freq_hz; - u32 bandwidth; - u8 video_standard; - u8 rf_mode; - - void *devptr; -}; - -#endif -- cgit v0.10.2 From 89fd28545c7390eb6c63d3d9e6faac78942dd1a4 Mon Sep 17 00:00:00 2001 From: Michael Krufky Date: Sat, 6 Sep 2008 11:44:53 -0300 Subject: V4L/DVB (8949): xc5000: allow multiple driver instances for the same hardware to share state Convert xc5000 to use the hybrid_tuner_request_state and hybrid_tuner_release_state macros to manage state sharing between hybrid tuner instances. Signed-off-by: Michael Krufky Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/common/tuners/xc5000.c b/drivers/media/common/tuners/xc5000.c index 50d42c8..1850f7b 100644 --- a/drivers/media/common/tuners/xc5000.c +++ b/drivers/media/common/tuners/xc5000.c @@ -30,6 +30,7 @@ #include "dvb_frontend.h" #include "xc5000.h" +#include "tuner-i2c.h" static int debug; module_param(debug, int, 0644); @@ -39,6 +40,9 @@ static int xc5000_load_fw_on_attach; module_param_named(init_fw, xc5000_load_fw_on_attach, int, 0644); MODULE_PARM_DESC(init_fw, "Load firmware during driver initialization."); +static DEFINE_MUTEX(xc5000_list_mutex); +static LIST_HEAD(hybrid_tuner_instance_list); + #define dprintk(level,fmt, arg...) if (debug >= level) \ printk(KERN_INFO "%s: " fmt, "xc5000", ## arg) @@ -47,7 +51,9 @@ MODULE_PARM_DESC(init_fw, "Load firmware during driver initialization."); struct xc5000_priv { struct xc5000_config *cfg; - struct i2c_adapter *i2c; + + struct tuner_i2c_props i2c_props; + struct list_head hybrid_tuner_instance_list; u32 freq_hz; u32 bandwidth; @@ -520,13 +526,13 @@ static int xc5000_readreg(struct xc5000_priv *priv, u16 reg, u16 *val) u8 buf[2] = { reg >> 8, reg & 0xff }; u8 bval[2] = { 0, 0 }; struct i2c_msg msg[2] = { - { .addr = priv->cfg->i2c_address, + { .addr = priv->i2c_props.addr, .flags = 0, .buf = &buf[0], .len = 2 }, - { .addr = priv->cfg->i2c_address, + { .addr = priv->i2c_props.addr, .flags = I2C_M_RD, .buf = &bval[0], .len = 2 }, }; - if (i2c_transfer(priv->i2c, msg, 2) != 2) { + if (i2c_transfer(priv->i2c_props.adap, msg, 2) != 2) { printk(KERN_WARNING "xc5000: I2C read failed\n"); return -EREMOTEIO; } @@ -537,10 +543,10 @@ static int xc5000_readreg(struct xc5000_priv *priv, u16 reg, u16 *val) static int xc5000_writeregs(struct xc5000_priv *priv, u8 *buf, u8 len) { - struct i2c_msg msg = { .addr = priv->cfg->i2c_address, + struct i2c_msg msg = { .addr = priv->i2c_props.addr, .flags = 0, .buf = buf, .len = len }; - if (i2c_transfer(priv->i2c, &msg, 1) != 1) { + if (i2c_transfer(priv->i2c_props.adap, &msg, 1) != 1) { printk(KERN_ERR "xc5000: I2C write failed (len=%i)\n", (int)len); return -EREMOTEIO; @@ -550,10 +556,10 @@ static int xc5000_writeregs(struct xc5000_priv *priv, u8 *buf, u8 len) static int xc5000_readregs(struct xc5000_priv *priv, u8 *buf, u8 len) { - struct i2c_msg msg = { .addr = priv->cfg->i2c_address, + struct i2c_msg msg = { .addr = priv->i2c_props.addr, .flags = I2C_M_RD, .buf = buf, .len = len }; - if (i2c_transfer(priv->i2c, &msg, 1) != 1) { + if (i2c_transfer(priv->i2c_props.adap, &msg, 1) != 1) { printk(KERN_ERR "xc5000 I2C read failed (len=%i)\n",(int)len); return -EREMOTEIO; } @@ -570,7 +576,7 @@ static int xc5000_fwupload(struct dvb_frontend* fe) printk(KERN_INFO "xc5000: waiting for firmware upload (%s)...\n", XC5000_DEFAULT_FIRMWARE); - ret = request_firmware(&fw, XC5000_DEFAULT_FIRMWARE, &priv->i2c->dev); + ret = request_firmware(&fw, XC5000_DEFAULT_FIRMWARE, &priv->i2c_props.adap->dev); if (ret) { printk(KERN_ERR "xc5000: Upload failed. (file not found?)\n"); ret = XC_RESULT_RESET_FAILURE; @@ -908,9 +914,19 @@ static int xc5000_init(struct dvb_frontend *fe) static int xc5000_release(struct dvb_frontend *fe) { + struct xc5000_priv *priv = fe->tuner_priv; + dprintk(1, "%s()\n", __func__); - kfree(fe->tuner_priv); + + mutex_lock(&xc5000_list_mutex); + + if (priv) + hybrid_tuner_release_state(priv); + + mutex_unlock(&xc5000_list_mutex); + fe->tuner_priv = NULL; + return 0; } @@ -938,26 +954,41 @@ struct dvb_frontend *xc5000_attach(struct dvb_frontend *fe, struct xc5000_config *cfg, void *devptr) { struct xc5000_priv *priv = NULL; + int instance; u16 id = 0; - dprintk(1, "%s()\n", __func__); + dprintk(1, "%s(%d-%04x)\n", __func__, + i2c ? i2c_adapter_id(i2c) : -1, + cfg ? cfg->i2c_address : -1); - priv = kzalloc(sizeof(struct xc5000_priv), GFP_KERNEL); - if (priv == NULL) - return NULL; + mutex_lock(&xc5000_list_mutex); - priv->cfg = cfg; - priv->bandwidth = BANDWIDTH_6_MHZ; - priv->i2c = i2c; - priv->devptr = devptr; + instance = hybrid_tuner_request_state(struct xc5000_priv, priv, + hybrid_tuner_instance_list, + i2c, cfg->i2c_address, "xc5000"); + switch (instance) { + case 0: + goto fail; + break; + case 1: + /* new tuner instance */ + priv->cfg = cfg; + priv->bandwidth = BANDWIDTH_6_MHZ; + priv->devptr = devptr; + + fe->tuner_priv = priv; + break; + default: + /* existing tuner instance */ + fe->tuner_priv = priv; + break; + } /* Check if firmware has been loaded. It is possible that another instance of the driver has loaded the firmware. */ - if (xc5000_readreg(priv, XREG_PRODUCT_ID, &id) != 0) { - kfree(priv); - return NULL; - } + if (xc5000_readreg(priv, XREG_PRODUCT_ID, &id) != 0) + goto fail; switch(id) { case XC_PRODUCT_ID_FW_LOADED: @@ -978,19 +1009,23 @@ struct dvb_frontend *xc5000_attach(struct dvb_frontend *fe, printk(KERN_ERR "xc5000: Device not found at addr 0x%02x (0x%x)\n", cfg->i2c_address, id); - kfree(priv); - return NULL; + goto fail; } + mutex_unlock(&xc5000_list_mutex); + memcpy(&fe->ops.tuner_ops, &xc5000_tuner_ops, sizeof(struct dvb_tuner_ops)); - fe->tuner_priv = priv; - if (xc5000_load_fw_on_attach) xc5000_init(fe); return fe; +fail: + mutex_unlock(&xc5000_list_mutex); + + xc5000_release(fe); + return NULL; } EXPORT_SYMBOL(xc5000_attach); -- cgit v0.10.2 From 2a6003c20771ca16fc6386b5fd258df2f2fa8232 Mon Sep 17 00:00:00 2001 From: Michael Krufky Date: Sat, 6 Sep 2008 13:54:45 -0300 Subject: V4L/DVB (8950): xc5000: prevent an OOPS if analog driver is unloaded while digital is in use Prevent an OOPS if xc5000_attach was called by tuner.ko before being called by the DVB adapter driver. The OOPS occurs when a digital tune request is made after tuner.ko is unloaded. When tuner.ko is unloaded, it takes the xc5000_config structure with it. Rather than storing a pointer to the xc5000_config structure, just store the if_khz and tuner_callback inside the xc5000_priv internal state structure. Signed-off-by: Michael Krufky Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/common/tuners/xc5000.c b/drivers/media/common/tuners/xc5000.c index 1850f7b..72efc65 100644 --- a/drivers/media/common/tuners/xc5000.c +++ b/drivers/media/common/tuners/xc5000.c @@ -50,17 +50,17 @@ static LIST_HEAD(hybrid_tuner_instance_list); #define XC5000_DEFAULT_FIRMWARE_SIZE 12332 struct xc5000_priv { - struct xc5000_config *cfg; - struct tuner_i2c_props i2c_props; struct list_head hybrid_tuner_instance_list; + u32 if_khz; u32 freq_hz; u32 bandwidth; u8 video_standard; u8 rf_mode; void *devptr; + int (*tuner_callback) (void *priv, int command, int arg); }; /* Misc Defines */ @@ -233,9 +233,8 @@ static void xc5000_TunerReset(struct dvb_frontend *fe) dprintk(1, "%s()\n", __func__); - if (priv->cfg->tuner_callback) { - ret = priv->cfg->tuner_callback(priv->devptr, - XC5000_TUNER_RESET, 0); + if (priv->tuner_callback) { + ret = priv->tuner_callback(priv->devptr, XC5000_TUNER_RESET, 0); if (ret) printk(KERN_ERR "xc5000: reset failed\n"); } else @@ -692,10 +691,10 @@ static int xc5000_set_params(struct dvb_frontend *fe, return -EREMOTEIO; } - ret = xc_set_IF_frequency(priv, priv->cfg->if_khz); + ret = xc_set_IF_frequency(priv, priv->if_khz); if (ret != XC_RESULT_SUCCESS) { printk(KERN_ERR "xc5000: xc_Set_IF_frequency(%d) failed\n", - priv->cfg->if_khz); + priv->if_khz); return -EIO; } @@ -972,9 +971,10 @@ struct dvb_frontend *xc5000_attach(struct dvb_frontend *fe, break; case 1: /* new tuner instance */ - priv->cfg = cfg; priv->bandwidth = BANDWIDTH_6_MHZ; priv->devptr = devptr; + priv->if_khz = cfg->if_khz; + priv->tuner_callback = cfg->tuner_callback; fe->tuner_priv = priv; break; -- cgit v0.10.2 From 30650961907368b1077cade35455fe931b14da6b Mon Sep 17 00:00:00 2001 From: Michael Krufky Date: Sat, 6 Sep 2008 14:56:58 -0300 Subject: V4L/DVB (8951): xc5000: dont pass devptr in xc5000_attach() Dont pass devptr in xc5000_attach, dont store it in xc5000_priv. This pointer is passed into the tuner_callback function, which always expects a pointer to fe->dvb->priv or i2c_adapter->algo_data. This prevents future possible bugs in new drivers, such as using a "devptr" other that the standard fe->dvb->priv in a DVB driver. Signed-off-by: Michael Krufky Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/common/tuners/xc5000.c b/drivers/media/common/tuners/xc5000.c index 72efc65..ccc4dae 100644 --- a/drivers/media/common/tuners/xc5000.c +++ b/drivers/media/common/tuners/xc5000.c @@ -59,7 +59,6 @@ struct xc5000_priv { u8 video_standard; u8 rf_mode; - void *devptr; int (*tuner_callback) (void *priv, int command, int arg); }; @@ -234,7 +233,10 @@ static void xc5000_TunerReset(struct dvb_frontend *fe) dprintk(1, "%s()\n", __func__); if (priv->tuner_callback) { - ret = priv->tuner_callback(priv->devptr, XC5000_TUNER_RESET, 0); + ret = priv->tuner_callback(((fe->dvb) && (fe->dvb->priv)) ? + fe->dvb->priv : + priv->i2c_props.adap->algo_data, + XC5000_TUNER_RESET, 0); if (ret) printk(KERN_ERR "xc5000: reset failed\n"); } else @@ -950,7 +952,7 @@ static const struct dvb_tuner_ops xc5000_tuner_ops = { struct dvb_frontend *xc5000_attach(struct dvb_frontend *fe, struct i2c_adapter *i2c, - struct xc5000_config *cfg, void *devptr) + struct xc5000_config *cfg) { struct xc5000_priv *priv = NULL; int instance; @@ -972,7 +974,6 @@ struct dvb_frontend *xc5000_attach(struct dvb_frontend *fe, case 1: /* new tuner instance */ priv->bandwidth = BANDWIDTH_6_MHZ; - priv->devptr = devptr; priv->if_khz = cfg->if_khz; priv->tuner_callback = cfg->tuner_callback; diff --git a/drivers/media/common/tuners/xc5000.h b/drivers/media/common/tuners/xc5000.h index 5389f74..fa0321c 100644 --- a/drivers/media/common/tuners/xc5000.h +++ b/drivers/media/common/tuners/xc5000.h @@ -49,13 +49,11 @@ struct xc5000_config { (defined(CONFIG_MEDIA_TUNER_XC5000_MODULE) && defined(MODULE)) extern struct dvb_frontend* xc5000_attach(struct dvb_frontend *fe, struct i2c_adapter *i2c, - struct xc5000_config *cfg, - void *devptr); + struct xc5000_config *cfg); #else static inline struct dvb_frontend* xc5000_attach(struct dvb_frontend *fe, struct i2c_adapter *i2c, - struct xc5000_config *cfg, - void *devptr) + struct xc5000_config *cfg) { printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); return NULL; diff --git a/drivers/media/video/au0828/au0828-dvb.c b/drivers/media/video/au0828/au0828-dvb.c index ba94be7..9624695 100644 --- a/drivers/media/video/au0828/au0828-dvb.c +++ b/drivers/media/video/au0828/au0828-dvb.c @@ -358,9 +358,8 @@ int au0828_dvb_register(struct au0828_dev *dev) &hauppauge_hvr950q_config, &dev->i2c_adap); if (dvb->frontend != NULL) - dvb_attach(xc5000_attach, dvb->frontend, - &dev->i2c_adap, - &hauppauge_hvr950q_tunerconfig, dev); + dvb_attach(xc5000_attach, dvb->frontend, &dev->i2c_adap, + &hauppauge_hvr950q_tunerconfig); break; case AU0828_BOARD_HAUPPAUGE_HVR950Q_MXL: dvb->frontend = dvb_attach(au8522_attach, diff --git a/drivers/media/video/cx23885/cx23885-dvb.c b/drivers/media/video/cx23885/cx23885-dvb.c index b85cb39..f462efd 100644 --- a/drivers/media/video/cx23885/cx23885-dvb.c +++ b/drivers/media/video/cx23885/cx23885-dvb.c @@ -390,8 +390,8 @@ static int dvb_register(struct cx23885_tsport *port) &dev->i2c_bus[0].i2c_adap); if (port->dvb.frontend != NULL) dvb_attach(xc5000_attach, port->dvb.frontend, - &i2c_bus->i2c_adap, - &hauppauge_hvr1500q_tunerconfig, port); + &i2c_bus->i2c_adap, + &hauppauge_hvr1500q_tunerconfig); break; case CX23885_BOARD_HAUPPAUGE_HVR1500: i2c_bus = &dev->i2c_bus[1]; @@ -471,8 +471,8 @@ static int dvb_register(struct cx23885_tsport *port) &i2c_bus->i2c_adap); if (port->dvb.frontend != NULL) dvb_attach(xc5000_attach, port->dvb.frontend, - &i2c_bus->i2c_adap, - &dvico_xc5000_tunerconfig, port); + &i2c_bus->i2c_adap, + &dvico_xc5000_tunerconfig); break; case CX23885_BOARD_DVICO_FUSIONHDTV_DVB_T_DUAL_EXP: { i2c_bus = &dev->i2c_bus[port->nr - 1]; diff --git a/drivers/media/video/cx88/cx88-dvb.c b/drivers/media/video/cx88/cx88-dvb.c index d96173f..07270b7 100644 --- a/drivers/media/video/cx88/cx88-dvb.c +++ b/drivers/media/video/cx88/cx88-dvb.c @@ -813,13 +813,9 @@ static int dvb_register(struct cx8802_dev *dev) &pinnacle_pctv_hd_800i_config, &core->i2c_adap); if (dev->dvb.frontend != NULL) { - /* tuner_config.video_dev must point to - * i2c_adap.algo_data - */ if (!dvb_attach(xc5000_attach, dev->dvb.frontend, &core->i2c_adap, - &pinnacle_pctv_hd_800i_tuner_config, - core->i2c_adap.algo_data)) + &pinnacle_pctv_hd_800i_tuner_config)) goto frontend_detach; } break; @@ -874,13 +870,9 @@ static int dvb_register(struct cx8802_dev *dev) &dvico_fusionhdtv7_config, &core->i2c_adap); if (dev->dvb.frontend != NULL) { - /* tuner_config.video_dev must point to - * i2c_adap.algo_data - */ if (!dvb_attach(xc5000_attach, dev->dvb.frontend, &core->i2c_adap, - &dvico_fusionhdtv7_tuner_config, - core->i2c_adap.algo_data)) + &dvico_fusionhdtv7_tuner_config)) goto frontend_detach; } break; diff --git a/drivers/media/video/tuner-core.c b/drivers/media/video/tuner-core.c index d806a35..39c7b9b 100644 --- a/drivers/media/video/tuner-core.c +++ b/drivers/media/video/tuner-core.c @@ -452,8 +452,7 @@ static void set_type(struct i2c_client *c, unsigned int type, xc5000_cfg.if_khz = 5380; xc5000_cfg.tuner_callback = t->tuner_callback; if (!dvb_attach(xc5000_attach, - &t->fe, t->i2c->adapter, &xc5000_cfg, - c->adapter->algo_data)) + &t->fe, t->i2c->adapter, &xc5000_cfg)) goto attach_failed; xc_tuner_ops = &t->fe.ops.tuner_ops; -- cgit v0.10.2 From c9166977efdb6480dbac13df226113eb75026606 Mon Sep 17 00:00:00 2001 From: Huang Weiyi Date: Tue, 9 Sep 2008 10:10:52 -0300 Subject: V4L/DVB: remove unused #include The file(s) below do not use LINUX_VERSION_CODE nor KERNEL_VERSION. drivers/media/video/pwc/pwc-ctrl.c This patch removes the said #include . Signed-off-by: Huang Weiyi Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/pwc/pwc-ctrl.c b/drivers/media/video/pwc/pwc-ctrl.c index dbc5607..c665302 100644 --- a/drivers/media/video/pwc/pwc-ctrl.c +++ b/drivers/media/video/pwc/pwc-ctrl.c @@ -41,7 +41,6 @@ #include #endif #include -#include #include "pwc.h" #include "pwc-uncompress.h" -- cgit v0.10.2 From c87994db017a5a28af2edd043669a371d800919e Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Thu, 11 Sep 2008 09:33:26 -0300 Subject: V4L/DVB (8954): common/tuners: Drop code after return or goto The break after the return or goto serves no purpose. Signed-off-by: Julia Lawall Reviewed-by: Richard Genoud Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/common/tuners/mxl5007t.c b/drivers/media/common/tuners/mxl5007t.c index cb25e43..64379f2 100644 --- a/drivers/media/common/tuners/mxl5007t.c +++ b/drivers/media/common/tuners/mxl5007t.c @@ -979,7 +979,6 @@ struct dvb_frontend *mxl5007t_attach(struct dvb_frontend *fe, switch (instance) { case 0: goto fail; - break; case 1: /* new tuner instance */ state->config = cfg; diff --git a/drivers/media/common/tuners/tda18271-fe.c b/drivers/media/common/tuners/tda18271-fe.c index 93063c6..1b48b5d 100644 --- a/drivers/media/common/tuners/tda18271-fe.c +++ b/drivers/media/common/tuners/tda18271-fe.c @@ -1155,7 +1155,6 @@ struct dvb_frontend *tda18271_attach(struct dvb_frontend *fe, u8 addr, switch (instance) { case 0: goto fail; - break; case 1: /* new tuner instance */ priv->gate = (cfg) ? cfg->gate : TDA18271_GATE_AUTO; diff --git a/drivers/media/common/tuners/tda9887.c b/drivers/media/common/tuners/tda9887.c index 72abf0b..ff1788c 100644 --- a/drivers/media/common/tuners/tda9887.c +++ b/drivers/media/common/tuners/tda9887.c @@ -686,7 +686,6 @@ struct dvb_frontend *tda9887_attach(struct dvb_frontend *fe, case 0: mutex_unlock(&tda9887_list_mutex); return NULL; - break; case 1: fe->analog_demod_priv = priv; priv->mode = T_STANDBY; diff --git a/drivers/media/common/tuners/tuner-simple.c b/drivers/media/common/tuners/tuner-simple.c index fc3a6a9..2a1aac1 100644 --- a/drivers/media/common/tuners/tuner-simple.c +++ b/drivers/media/common/tuners/tuner-simple.c @@ -1040,7 +1040,6 @@ struct dvb_frontend *simple_tuner_attach(struct dvb_frontend *fe, case 0: mutex_unlock(&tuner_simple_list_mutex); return NULL; - break; case 1: fe->tuner_priv = priv; -- cgit v0.10.2 From 176c2f34157a8d8b252c8f0bc242457c971b06a1 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Sun, 7 Sep 2008 12:49:59 -0300 Subject: V4L/DVB (8956): bttv: Turn video_nr, vbi_nr and radio_nr into arrays With video_nr, vbi_nr and radio_nr being simple integers, it is not possible to use these parameters on a system with multiple bttv adapters (which happens to be my case.) video_register_device() will always fail on the second and later adapters. Turn these parameters into arrays, as many other V4L drivers are already doing, so that they can be used on such systems. Signed-off-by: Jean Delvare Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/bt8xx/bttv-driver.c b/drivers/media/video/bt8xx/bttv-driver.c index ef205cd2..9bb247c 100644 --- a/drivers/media/video/bt8xx/bttv-driver.c +++ b/drivers/media/video/bt8xx/bttv-driver.c @@ -76,9 +76,9 @@ static unsigned int gbuffers = 8; static unsigned int gbufsize = 0x208000; static unsigned int reset_crop = 1; -static int video_nr = -1; -static int radio_nr = -1; -static int vbi_nr = -1; +static int video_nr[BTTV_MAX] = { [0 ... (BTTV_MAX-1)] = -1 }; +static int radio_nr[BTTV_MAX] = { [0 ... (BTTV_MAX-1)] = -1 }; +static int vbi_nr[BTTV_MAX] = { [0 ... (BTTV_MAX-1)] = -1 }; static int debug_latency; static unsigned int fdsr; @@ -108,9 +108,6 @@ module_param(irq_debug, int, 0644); module_param(debug_latency, int, 0644); module_param(fdsr, int, 0444); -module_param(video_nr, int, 0444); -module_param(radio_nr, int, 0444); -module_param(vbi_nr, int, 0444); module_param(gbuffers, int, 0444); module_param(gbufsize, int, 0444); module_param(reset_crop, int, 0444); @@ -130,7 +127,10 @@ module_param(uv_ratio, int, 0444); module_param(full_luma_range, int, 0444); module_param(coring, int, 0444); -module_param_array(radio, int, NULL, 0444); +module_param_array(radio, int, NULL, 0444); +module_param_array(video_nr, int, NULL, 0444); +module_param_array(radio_nr, int, NULL, 0444); +module_param_array(vbi_nr, int, NULL, 0444); MODULE_PARM_DESC(radio,"The TV card supports radio, default is 0 (no)"); MODULE_PARM_DESC(bigendian,"byte order of the framebuffer, default is native endian"); @@ -152,6 +152,9 @@ MODULE_PARM_DESC(irq_iswitch,"switch inputs in irq handler"); MODULE_PARM_DESC(uv_ratio,"ratio between u and v gains, default is 50"); MODULE_PARM_DESC(full_luma_range,"use the full luma range, default is 0 (no)"); MODULE_PARM_DESC(coring,"set the luma coring level, default is 0 (no)"); +MODULE_PARM_DESC(video_nr, "video device numbers"); +MODULE_PARM_DESC(vbi_nr, "vbi device numbers"); +MODULE_PARM_DESC(radio_nr, "radio device numbers"); MODULE_DESCRIPTION("bttv - v4l/v4l2 driver module for bt848/878 based cards"); MODULE_AUTHOR("Ralph Metzler & Marcus Metzler & Gerd Knorr"); @@ -4252,7 +4255,8 @@ static int __devinit bttv_register_video(struct bttv *btv) if (NULL == btv->video_dev) goto err; - if (video_register_device(btv->video_dev,VFL_TYPE_GRABBER,video_nr)<0) + if (video_register_device(btv->video_dev, VFL_TYPE_GRABBER, + video_nr[btv->c.nr]) < 0) goto err; printk(KERN_INFO "bttv%d: registered device video%d\n", btv->c.nr,btv->video_dev->minor & 0x1f); @@ -4268,7 +4272,8 @@ static int __devinit bttv_register_video(struct bttv *btv) if (NULL == btv->vbi_dev) goto err; - if (video_register_device(btv->vbi_dev,VFL_TYPE_VBI,vbi_nr)<0) + if (video_register_device(btv->vbi_dev, VFL_TYPE_VBI, + vbi_nr[btv->c.nr]) < 0) goto err; printk(KERN_INFO "bttv%d: registered device vbi%d\n", btv->c.nr,btv->vbi_dev->minor & 0x1f); @@ -4279,7 +4284,8 @@ static int __devinit bttv_register_video(struct bttv *btv) btv->radio_dev = vdev_init(btv, &radio_template, "radio"); if (NULL == btv->radio_dev) goto err; - if (video_register_device(btv->radio_dev, VFL_TYPE_RADIO,radio_nr)<0) + if (video_register_device(btv->radio_dev, VFL_TYPE_RADIO, + radio_nr[btv->c.nr]) < 0) goto err; printk(KERN_INFO "bttv%d: registered device radio%d\n", btv->c.nr,btv->radio_dev->minor & 0x1f); -- cgit v0.10.2 From 4c522e74902a1fa15a7ec5e5a3325b250afa54ab Mon Sep 17 00:00:00 2001 From: "Kirill A. Shutemov" Date: Wed, 10 Sep 2008 08:22:06 -0300 Subject: V4L/DVB (8959): include into linux/ivtv.h linux/videodev2.h defines enum v4l2_buf_type and struct v4l2_rect Signed-off-by: Kirill A. Shutemov Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab diff --git a/include/linux/ivtv.h b/include/linux/ivtv.h index 17ca64b..f272028 100644 --- a/include/linux/ivtv.h +++ b/include/linux/ivtv.h @@ -23,6 +23,7 @@ #include #include +#include /* ivtv knows several distinct output modes: MPEG streaming, YUV streaming, YUV updates through user DMA and the passthrough -- cgit v0.10.2 From 8ca4dae3e601b527cb099ef72d821d7af075f8ae Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Sun, 7 Sep 2008 05:58:54 -0300 Subject: V4L/DVB (8962): zr36067: VIDIOC_S_FMT returns the colorspace value Ioctl VIDIOC_S_FMT is supposed to fill the colorspace value in the returned buffer. Signed-off-by: Jean Delvare Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/zoran_driver.c b/drivers/media/video/zoran_driver.c index f0af9b7..25de763 100644 --- a/drivers/media/video/zoran_driver.c +++ b/drivers/media/video/zoran_driver.c @@ -2917,6 +2917,8 @@ zoran_do_ioctl (struct inode *inode, fmt->fmt.pix.bytesperline = 0; fmt->fmt.pix.sizeimage = fh->jpg_buffers.buffer_size; + fmt->fmt.pix.colorspace = + V4L2_COLORSPACE_SMPTE170M; /* we hereby abuse this variable to show that * we're gonna do mjpeg capture */ @@ -2976,6 +2978,8 @@ zoran_do_ioctl (struct inode *inode, fmt->fmt.pix.sizeimage = fh->v4l_settings.height * fh->v4l_settings.bytesperline; + fmt->fmt.pix.colorspace = + fh->v4l_settings.format->colorspace; if (BUZ_MAX_HEIGHT < (fh->v4l_settings.height * 2)) fmt->fmt.pix.field = -- cgit v0.10.2 From 26dc4d0487bb8b8de32d09c18a83c63d622156f2 Mon Sep 17 00:00:00 2001 From: Janne Grunau Date: Sun, 21 Sep 2008 20:50:11 -0300 Subject: V4L/DVB (8964): dvb/budget: push adapter_nr mod option down to individual drivers adapter_nr mod option does not make sense for budget-core since it is only common code shared by all budget drivers Signed-off-by: Janne Grunau Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/dvb/ttpci/budget-av.c b/drivers/media/dvb/ttpci/budget-av.c index 839c941..1032ea7 100644 --- a/drivers/media/dvb/ttpci/budget-av.c +++ b/drivers/media/dvb/ttpci/budget-av.c @@ -57,6 +57,8 @@ #define SLOTSTATUS_READY 8 #define SLOTSTATUS_OCCUPIED (SLOTSTATUS_PRESENT|SLOTSTATUS_RESET|SLOTSTATUS_READY) +DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); + struct budget_av { struct budget budget; struct video_device *vd; @@ -1127,7 +1129,9 @@ static int budget_av_attach(struct saa7146_dev *dev, struct saa7146_pci_extensio dev->ext_priv = budget_av; - if ((err = ttpci_budget_init(&budget_av->budget, dev, info, THIS_MODULE))) { + err = ttpci_budget_init(&budget_av->budget, dev, info, THIS_MODULE, + adapter_nr); + if (err) { kfree(budget_av); return err; } diff --git a/drivers/media/dvb/ttpci/budget-ci.c b/drivers/media/dvb/ttpci/budget-ci.c index 38dd5cf..0a5aad4 100644 --- a/drivers/media/dvb/ttpci/budget-ci.c +++ b/drivers/media/dvb/ttpci/budget-ci.c @@ -92,6 +92,8 @@ static int ir_debug; module_param(ir_debug, int, 0644); MODULE_PARM_DESC(ir_debug, "enable debugging information for IR decoding"); +DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); + struct budget_ci_ir { struct input_dev *dev; struct tasklet_struct msp430_irq_tasklet; @@ -1183,7 +1185,8 @@ static int budget_ci_attach(struct saa7146_dev *dev, struct saa7146_pci_extensio dev->ext_priv = budget_ci; - err = ttpci_budget_init(&budget_ci->budget, dev, info, THIS_MODULE); + err = ttpci_budget_init(&budget_ci->budget, dev, info, THIS_MODULE, + adapter_nr); if (err) goto out2; diff --git a/drivers/media/dvb/ttpci/budget-core.c b/drivers/media/dvb/ttpci/budget-core.c index 6f4ddb6..ba18e56 100644 --- a/drivers/media/dvb/ttpci/budget-core.c +++ b/drivers/media/dvb/ttpci/budget-core.c @@ -57,8 +57,6 @@ module_param_named(bufsize, dma_buffer_size, int, 0444); MODULE_PARM_DESC(debug, "Turn on/off budget debugging (default:off)."); MODULE_PARM_DESC(bufsize, "DMA buffer size in KB, default: 188, min: 188, max: 1410 (Activy: 564)"); -DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); - /**************************************************************************** * TT budget / WinTV Nova ****************************************************************************/ @@ -411,7 +409,7 @@ static void budget_unregister(struct budget *budget) int ttpci_budget_init(struct budget *budget, struct saa7146_dev *dev, struct saa7146_pci_extension_data *info, - struct module *owner) + struct module *owner, short *adapter_nums) { int ret = 0; struct budget_info *bi = info->ext_priv; @@ -474,7 +472,7 @@ int ttpci_budget_init(struct budget *budget, struct saa7146_dev *dev, printk("%s: dma buffer size %u\n", budget->dev->name, budget->buffer_size); ret = dvb_register_adapter(&budget->dvb_adapter, budget->card->name, - owner, &budget->dev->pci->dev, adapter_nr); + owner, &budget->dev->pci->dev, adapter_nums); if (ret < 0) return ret; diff --git a/drivers/media/dvb/ttpci/budget-patch.c b/drivers/media/dvb/ttpci/budget-patch.c index bbd234f..60136688 100644 --- a/drivers/media/dvb/ttpci/budget-patch.c +++ b/drivers/media/dvb/ttpci/budget-patch.c @@ -39,6 +39,8 @@ #include "bsru6.h" +DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); + #define budget_patch budget static struct saa7146_extension budget_extension; @@ -592,8 +594,9 @@ static int budget_patch_attach (struct saa7146_dev* dev, struct saa7146_pci_exte dprintk(2, "budget: %p\n", budget); - if ((err = ttpci_budget_init (budget, dev, info, THIS_MODULE))) { - kfree (budget); + err = ttpci_budget_init(budget, dev, info, THIS_MODULE, adapter_nr); + if (err) { + kfree(budget); return err; } diff --git a/drivers/media/dvb/ttpci/budget.c b/drivers/media/dvb/ttpci/budget.c index d95203d..1638e1d 100644 --- a/drivers/media/dvb/ttpci/budget.c +++ b/drivers/media/dvb/ttpci/budget.c @@ -52,6 +52,8 @@ static int diseqc_method; module_param(diseqc_method, int, 0444); MODULE_PARM_DESC(diseqc_method, "Select DiSEqC method for subsystem id 13c2:1003, 0: default, 1: more reliable (for newer revisions only)"); +DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); + static void Set22K (struct budget *budget, int state) { struct saa7146_dev *dev=budget->dev; @@ -598,7 +600,8 @@ static int budget_attach (struct saa7146_dev* dev, struct saa7146_pci_extension_ dev->ext_priv = budget; - if ((err = ttpci_budget_init (budget, dev, info, THIS_MODULE))) { + err = ttpci_budget_init(budget, dev, info, THIS_MODULE, adapter_nr); + if (err) { printk("==> failed\n"); kfree (budget); return err; diff --git a/drivers/media/dvb/ttpci/budget.h b/drivers/media/dvb/ttpci/budget.h index dd450b7..86435bf 100644 --- a/drivers/media/dvb/ttpci/budget.h +++ b/drivers/media/dvb/ttpci/budget.h @@ -109,7 +109,7 @@ static struct saa7146_pci_extension_data x_var = { \ extern int ttpci_budget_init(struct budget *budget, struct saa7146_dev *dev, struct saa7146_pci_extension_data *info, - struct module *owner); + struct module *owner, short *adapter_nums); extern void ttpci_budget_init_hooks(struct budget *budget); extern int ttpci_budget_deinit(struct budget *budget); extern void ttpci_budget_irq10_handler(struct saa7146_dev *dev, u32 * isr); -- cgit v0.10.2 From de3e3b82a6d15264798d4e36f42abaa69f53ca06 Mon Sep 17 00:00:00 2001 From: roel kluin Date: Thu, 18 Sep 2008 17:50:15 -0300 Subject: V4L/DVB: pxa-camera: Unsigned dma_chans[] cannot be negative Unsigned dma_chans[] cannot be negative Also the third time dma_chans[0] < 0 was tested instead of dma_chans[2] Signed-off-by: Roel Kluin Signed-off-by: Guennadi Liakhovetski Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/pxa_camera.c b/drivers/media/video/pxa_camera.c index 14569b5..eb6be58 100644 --- a/drivers/media/video/pxa_camera.c +++ b/drivers/media/video/pxa_camera.c @@ -1120,31 +1120,31 @@ static int pxa_camera_probe(struct platform_device *pdev) pcdev->dev = &pdev->dev; /* request dma */ - pcdev->dma_chans[0] = pxa_request_dma("CI_Y", DMA_PRIO_HIGH, - pxa_camera_dma_irq_y, pcdev); - if (pcdev->dma_chans[0] < 0) { + err = pxa_request_dma("CI_Y", DMA_PRIO_HIGH, + pxa_camera_dma_irq_y, pcdev); + if (err < 0) { dev_err(pcdev->dev, "Can't request DMA for Y\n"); - err = -ENOMEM; goto exit_iounmap; } + pcdev->dma_chans[0] = err; dev_dbg(pcdev->dev, "got DMA channel %d\n", pcdev->dma_chans[0]); - pcdev->dma_chans[1] = pxa_request_dma("CI_U", DMA_PRIO_HIGH, - pxa_camera_dma_irq_u, pcdev); - if (pcdev->dma_chans[1] < 0) { + err = pxa_request_dma("CI_U", DMA_PRIO_HIGH, + pxa_camera_dma_irq_u, pcdev); + if (err < 0) { dev_err(pcdev->dev, "Can't request DMA for U\n"); - err = -ENOMEM; goto exit_free_dma_y; } + pcdev->dma_chans[1] = err; dev_dbg(pcdev->dev, "got DMA channel (U) %d\n", pcdev->dma_chans[1]); - pcdev->dma_chans[2] = pxa_request_dma("CI_V", DMA_PRIO_HIGH, - pxa_camera_dma_irq_v, pcdev); - if (pcdev->dma_chans[0] < 0) { + err = pxa_request_dma("CI_V", DMA_PRIO_HIGH, + pxa_camera_dma_irq_v, pcdev); + if (err < 0) { dev_err(pcdev->dev, "Can't request DMA for V\n"); - err = -ENOMEM; goto exit_free_dma_u; } + pcdev->dma_chans[2] = err; dev_dbg(pcdev->dev, "got DMA channel (V) %d\n", pcdev->dma_chans[2]); DRCMR(68) = pcdev->dma_chans[0] | DRCMR_MAPVLD; -- cgit v0.10.2 From ef80bfeb30f82fb718731a3323a75ae08396a4ea Mon Sep 17 00:00:00 2001 From: Michael Krufky Date: Tue, 16 Sep 2008 02:15:30 -0300 Subject: V4L/DVB (8968): replace xc3028 firmware filenames with defined default firmware names Signed-off-by: Michael Krufky Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/dvb/dvb-usb/cxusb.c b/drivers/media/dvb/dvb-usb/cxusb.c index bffb443..1a74612 100644 --- a/drivers/media/dvb/dvb-usb/cxusb.c +++ b/drivers/media/dvb/dvb-usb/cxusb.c @@ -773,7 +773,7 @@ static int cxusb_dvico_xc3028_tuner_attach(struct dvb_usb_adapter *adap) .callback = dvico_bluebird_xc2028_callback, }; static struct xc2028_ctrl ctl = { - .fname = "xc3028-v27.fw", + .fname = XC2028_DEFAULT_FIRMWARE, .max_len = 64, .demod = XC3028_FE_ZARLINK456, }; diff --git a/drivers/media/video/cx23885/cx23885-dvb.c b/drivers/media/video/cx23885/cx23885-dvb.c index f462efd..3b54f13 100644 --- a/drivers/media/video/cx23885/cx23885-dvb.c +++ b/drivers/media/video/cx23885/cx23885-dvb.c @@ -407,7 +407,7 @@ static int dvb_register(struct cx23885_tsport *port) .callback = cx23885_tuner_callback, }; static struct xc2028_ctrl ctl = { - .fname = "xc3028-v27.fw", + .fname = XC2028_DEFAULT_FIRMWARE, .max_len = 64, .scode_table = XC3028_FE_OREN538, }; @@ -447,7 +447,7 @@ static int dvb_register(struct cx23885_tsport *port) .callback = cx23885_tuner_callback, }; static struct xc2028_ctrl ctl = { - .fname = "xc3028L-v36.fw", + .fname = XC3028L_DEFAULT_FIRMWARE, .max_len = 64, .demod = 5000, .d2633 = 1 @@ -489,7 +489,7 @@ static int dvb_register(struct cx23885_tsport *port) .callback = cx23885_tuner_callback, }; static struct xc2028_ctrl ctl = { - .fname = "xc3028-v27.fw", + .fname = XC2028_DEFAULT_FIRMWARE, .max_len = 64, .demod = XC3028_FE_ZARLINK456, }; @@ -516,7 +516,7 @@ static int dvb_register(struct cx23885_tsport *port) .callback = cx23885_tuner_callback, }; static struct xc2028_ctrl ctl = { - .fname = "xc3028-v27.fw", + .fname = XC2028_DEFAULT_FIRMWARE, .max_len = 64, .demod = XC3028_FE_ZARLINK456, }; diff --git a/drivers/media/video/cx88/cx88-dvb.c b/drivers/media/video/cx88/cx88-dvb.c index 07270b7..9f0e5b3 100644 --- a/drivers/media/video/cx88/cx88-dvb.c +++ b/drivers/media/video/cx88/cx88-dvb.c @@ -831,7 +831,7 @@ static int dvb_register(struct cx8802_dev *dev) .callback = cx88_pci_nano_callback, }; static struct xc2028_ctrl ctl = { - .fname = "xc3028-v27.fw", + .fname = XC2028_DEFAULT_FIRMWARE, .max_len = 64, .scode_table = XC3028_FE_OREN538, }; -- cgit v0.10.2 From 6e623433f7f566d8aca64c519a19c2f7bbb686be Mon Sep 17 00:00:00 2001 From: Antti Palosaari Date: Mon, 15 Sep 2008 14:34:31 -0300 Subject: V4L/DVB (8970): mt2060: implement I2C-gate control - implement I2C-gate control Signed-off-by: Antti Palosaari Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/common/tuners/mt2060.c b/drivers/media/common/tuners/mt2060.c index 1305b0e..12206d7 100644 --- a/drivers/media/common/tuners/mt2060.c +++ b/drivers/media/common/tuners/mt2060.c @@ -170,6 +170,9 @@ static int mt2060_set_params(struct dvb_frontend *fe, struct dvb_frontend_parame b[0] = REG_LO1B1; b[1] = 0xFF; + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 1); /* open i2c_gate */ + mt2060_writeregs(priv,b,2); freq = params->frequency / 1000; // Hz -> kHz @@ -233,6 +236,9 @@ static int mt2060_set_params(struct dvb_frontend *fe, struct dvb_frontend_parame i++; } while (i<10); + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 0); /* close i2c_gate */ + return ret; } @@ -296,13 +302,35 @@ static int mt2060_get_bandwidth(struct dvb_frontend *fe, u32 *bandwidth) static int mt2060_init(struct dvb_frontend *fe) { struct mt2060_priv *priv = fe->tuner_priv; - return mt2060_writereg(priv, REG_VGAG, (priv->cfg->clock_out << 6) | 0x33); + int ret; + + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 1); /* open i2c_gate */ + + ret = mt2060_writereg(priv, REG_VGAG, + (priv->cfg->clock_out << 6) | 0x33); + + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 0); /* close i2c_gate */ + + return ret; } static int mt2060_sleep(struct dvb_frontend *fe) { struct mt2060_priv *priv = fe->tuner_priv; - return mt2060_writereg(priv, REG_VGAG, (priv->cfg->clock_out << 6) | 0x30); + int ret; + + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 1); /* open i2c_gate */ + + ret = mt2060_writereg(priv, REG_VGAG, + (priv->cfg->clock_out << 6) | 0x30); + + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 0); /* close i2c_gate */ + + return ret; } static int mt2060_release(struct dvb_frontend *fe) @@ -344,6 +372,9 @@ struct dvb_frontend * mt2060_attach(struct dvb_frontend *fe, struct i2c_adapter priv->i2c = i2c; priv->if1_freq = if1; + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 1); /* open i2c_gate */ + if (mt2060_readreg(priv,REG_PART_REV,&id) != 0) { kfree(priv); return NULL; @@ -360,6 +391,9 @@ struct dvb_frontend * mt2060_attach(struct dvb_frontend *fe, struct i2c_adapter mt2060_calibrate(priv); + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 0); /* close i2c_gate */ + return fe; } EXPORT_SYMBOL(mt2060_attach); -- cgit v0.10.2 From 825b96708054ca16d6e4d56a29326d3b2cdd697d Mon Sep 17 00:00:00 2001 From: Antti Palosaari Date: Mon, 15 Sep 2008 15:01:52 -0300 Subject: V4L/DVB (8971): initial driver for af9013 demodulator - initial driver for the Afatech AF9013 demodulator Signed-off-by: Antti Palosaari [mchehab.redhat.com: having a global var called 'debug' is not a good idea. rename it to af9013_debug] Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/dvb/frontends/Kconfig b/drivers/media/dvb/frontends/Kconfig index e2444f2..097d9f0 100644 --- a/drivers/media/dvb/frontends/Kconfig +++ b/drivers/media/dvb/frontends/Kconfig @@ -398,4 +398,10 @@ config DVB_DUMMY_FE tristate "Dummy frontend driver" default n +config DVB_AF9013 + tristate "Afatech AF9013 demodulator" + depends on DVB_CORE && I2C + default m if DVB_FE_CUSTOMISE + help + Say Y when you want to support this frontend. endmenu diff --git a/drivers/media/dvb/frontends/Makefile b/drivers/media/dvb/frontends/Makefile index ca24618..1b54788 100644 --- a/drivers/media/dvb/frontends/Makefile +++ b/drivers/media/dvb/frontends/Makefile @@ -50,3 +50,4 @@ obj-$(CONFIG_DVB_TDA10048) += tda10048.o obj-$(CONFIG_DVB_S5H1411) += s5h1411.o obj-$(CONFIG_DVB_LGS8GL5) += lgs8gl5.o obj-$(CONFIG_DVB_DUMMY_FE) += dvb_dummy_fe.o +obj-$(CONFIG_DVB_AF9013) += af9013.o diff --git a/drivers/media/dvb/frontends/af9013.c b/drivers/media/dvb/frontends/af9013.c new file mode 100644 index 0000000..9f2129d --- /dev/null +++ b/drivers/media/dvb/frontends/af9013.c @@ -0,0 +1,1691 @@ +/* + * DVB USB Linux driver for Afatech AF9015 DVB-T USB2.0 receiver + * + * Copyright (C) 2007 Antti Palosaari + * + * Thanks to Afatech who kindly provided information. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#include "dvb_frontend.h" +#include "af9013_priv.h" +#include "af9013.h" + +int af9013_debug; + +struct af9013_state { + struct i2c_adapter *i2c; + struct dvb_frontend frontend; + + struct af9013_config config; + + u16 signal_strength; + u32 ber; + u32 ucblocks; + u16 snr; + u32 frequency; + unsigned long next_statistics_check; +}; + +static u8 regmask[8] = { 0x01, 0x03, 0x07, 0x0f, 0x1f, 0x3f, 0x7f, 0xff }; + +static int af9013_write_regs(struct af9013_state *state, u8 mbox, u16 reg, + u8 *val, u8 len) +{ + u8 buf[3+len]; + struct i2c_msg msg = { + .addr = state->config.demod_address, + .flags = 0, + .len = sizeof(buf), + .buf = buf }; + + buf[0] = reg >> 8; + buf[1] = reg & 0xff; + buf[2] = mbox; + memcpy(&buf[3], val, len); + + if (i2c_transfer(state->i2c, &msg, 1) != 1) { + warn("I2C write failed reg:%04x len:%d", reg, len); + return -EREMOTEIO; + } + return 0; +} + +static int af9013_write_ofdm_regs(struct af9013_state *state, u16 reg, u8 *val, + u8 len) +{ + u8 mbox = (1 << 0)|(1 << 1)|((len - 1) << 2)|(0 << 6)|(0 << 7); + return af9013_write_regs(state, mbox, reg, val, len); +} + +static int af9013_write_ofsm_regs(struct af9013_state *state, u16 reg, u8 *val, + u8 len) +{ + u8 mbox = (1 << 0)|(1 << 1)|((len - 1) << 2)|(1 << 6)|(1 << 7); + return af9013_write_regs(state, mbox, reg, val, len); +} + +/* write single register */ +static int af9013_write_reg(struct af9013_state *state, u16 reg, u8 val) +{ + return af9013_write_ofdm_regs(state, reg, &val, 1); +} + +/* read single register */ +static int af9013_read_reg(struct af9013_state *state, u16 reg, u8 *val) +{ + u8 obuf[3] = { reg >> 8, reg & 0xff, 0 }; + u8 ibuf[1]; + struct i2c_msg msg[2] = { + { + .addr = state->config.demod_address, + .flags = 0, + .len = sizeof(obuf), + .buf = obuf + }, { + .addr = state->config.demod_address, + .flags = I2C_M_RD, + .len = sizeof(ibuf), + .buf = ibuf + } + }; + + if (i2c_transfer(state->i2c, msg, 2) != 2) { + warn("I2C read failed reg:%04x", reg); + return -EREMOTEIO; + } + *val = ibuf[0]; + return 0; +} + +static int af9013_write_reg_bits(struct af9013_state *state, u16 reg, u8 pos, + u8 len, u8 val) +{ + int ret; + u8 tmp, mask; + + ret = af9013_read_reg(state, reg, &tmp); + if (ret) + return ret; + + mask = regmask[len - 1] << pos; + tmp = (tmp & ~mask) | ((val << pos) & mask); + + return af9013_write_reg(state, reg, tmp); +} + +static int af9013_read_reg_bits(struct af9013_state *state, u16 reg, u8 pos, + u8 len, u8 *val) +{ + int ret; + u8 tmp; + + ret = af9013_read_reg(state, reg, &tmp); + if (ret) + return ret; + *val = (tmp >> pos) & regmask[len - 1]; + return 0; +} + +static int af9013_set_gpio(struct af9013_state *state, u8 gpio, u8 gpioval) +{ + int ret; + u8 pos; + u16 addr; + deb_info("%s: gpio:%d gpioval:%02x\n", __func__, gpio, gpioval); + +/* GPIO0 & GPIO1 0xd735 + GPIO2 & GPIO3 0xd736 */ + + switch (gpio) { + case 0: + case 1: + addr = 0xd735; + break; + case 2: + case 3: + addr = 0xd736; + break; + + default: + err("invalid gpio:%d\n", gpio); + ret = -EINVAL; + goto error; + }; + + switch (gpio) { + case 0: + case 2: + pos = 0; + break; + case 1: + case 3: + default: + pos = 4; + break; + }; + + ret = af9013_write_reg_bits(state, addr, pos, 4, gpioval); + +error: + return ret; +} + +static u32 af913_div(u32 a, u32 b, u32 x) +{ + u32 r = 0, c = 0, i; + deb_info("%s: a:%d b:%d x:%d\n", __func__, a, b, x); + + if (a > b) { + c = a / b; + a = a - c * b; + } + + for (i = 0; i < x; i++) { + if (a >= b) { + r += 1; + a -= b; + } + a <<= 1; + r <<= 1; + } + r = (c << (u32)x) + r; + + deb_info("%s: a:%d b:%d x:%d r:%d r:%x\n", __func__, a, b, x, r, r); + return r; +} + +static int af9013_set_coeff(struct af9013_state *state, fe_bandwidth_t bw) +{ + int ret = 0; + u8 i = 0; + u8 buf[24]; + u32 ns_coeff1_2048nu; + u32 ns_coeff1_8191nu; + u32 ns_coeff1_8192nu; + u32 ns_coeff1_8193nu; + u32 ns_coeff2_2k; + u32 ns_coeff2_8k; + + deb_info("%s: adc_clock:%d bw:%d\n", __func__, + state->config.adc_clock, bw); + + switch (state->config.adc_clock) { + case 28800: /* 28.800 MHz */ + switch (bw) { + case BANDWIDTH_6_MHZ: + ns_coeff1_2048nu = 0x01e79e7a; + ns_coeff1_8191nu = 0x0079eb6e; + ns_coeff1_8192nu = 0x0079e79e; + ns_coeff1_8193nu = 0x0079e3cf; + ns_coeff2_2k = 0x00f3cf3d; + ns_coeff2_8k = 0x003cf3cf; + break; + case BANDWIDTH_7_MHZ: + ns_coeff1_2048nu = 0x0238e38e; + ns_coeff1_8191nu = 0x008e3d55; + ns_coeff1_8192nu = 0x008e38e4; + ns_coeff1_8193nu = 0x008e3472; + ns_coeff2_2k = 0x011c71c7; + ns_coeff2_8k = 0x00471c72; + break; + case BANDWIDTH_8_MHZ: + ns_coeff1_2048nu = 0x028a28a3; + ns_coeff1_8191nu = 0x00a28f3d; + ns_coeff1_8192nu = 0x00a28a29; + ns_coeff1_8193nu = 0x00a28514; + ns_coeff2_2k = 0x01451451; + ns_coeff2_8k = 0x00514514; + break; + default: + ret = -EINVAL; + } + break; + case 20480: /* 20.480 MHz */ + switch (bw) { + case BANDWIDTH_6_MHZ: + ns_coeff1_2048nu = 0x02adb6dc; + ns_coeff1_8191nu = 0x00ab7313; + ns_coeff1_8192nu = 0x00ab6db7; + ns_coeff1_8193nu = 0x00ab685c; + ns_coeff2_2k = 0x0156db6e; + ns_coeff2_8k = 0x0055b6dc; + break; + case BANDWIDTH_7_MHZ: + ns_coeff1_2048nu = 0x03200001; + ns_coeff1_8191nu = 0x00c80640; + ns_coeff1_8192nu = 0x00c80000; + ns_coeff1_8193nu = 0x00c7f9c0; + ns_coeff2_2k = 0x01900000; + ns_coeff2_8k = 0x00640000; + break; + case BANDWIDTH_8_MHZ: + ns_coeff1_2048nu = 0x03924926; + ns_coeff1_8191nu = 0x00e4996e; + ns_coeff1_8192nu = 0x00e49249; + ns_coeff1_8193nu = 0x00e48b25; + ns_coeff2_2k = 0x01c92493; + ns_coeff2_8k = 0x00724925; + break; + default: + ret = -EINVAL; + } + break; + case 28000: /* 28.000 MHz */ + switch (bw) { + case BANDWIDTH_6_MHZ: + ns_coeff1_2048nu = 0x01f58d10; + ns_coeff1_8191nu = 0x007d672f; + ns_coeff1_8192nu = 0x007d6344; + ns_coeff1_8193nu = 0x007d5f59; + ns_coeff2_2k = 0x00fac688; + ns_coeff2_8k = 0x003eb1a2; + break; + case BANDWIDTH_7_MHZ: + ns_coeff1_2048nu = 0x02492492; + ns_coeff1_8191nu = 0x00924db7; + ns_coeff1_8192nu = 0x00924925; + ns_coeff1_8193nu = 0x00924492; + ns_coeff2_2k = 0x01249249; + ns_coeff2_8k = 0x00492492; + break; + case BANDWIDTH_8_MHZ: + ns_coeff1_2048nu = 0x029cbc15; + ns_coeff1_8191nu = 0x00a7343f; + ns_coeff1_8192nu = 0x00a72f05; + ns_coeff1_8193nu = 0x00a729cc; + ns_coeff2_2k = 0x014e5e0a; + ns_coeff2_8k = 0x00539783; + break; + default: + ret = -EINVAL; + } + break; + case 25000: /* 25.000 MHz */ + switch (bw) { + case BANDWIDTH_6_MHZ: + ns_coeff1_2048nu = 0x0231bcb5; + ns_coeff1_8191nu = 0x008c7391; + ns_coeff1_8192nu = 0x008c6f2d; + ns_coeff1_8193nu = 0x008c6aca; + ns_coeff2_2k = 0x0118de5b; + ns_coeff2_8k = 0x00463797; + break; + case BANDWIDTH_7_MHZ: + ns_coeff1_2048nu = 0x028f5c29; + ns_coeff1_8191nu = 0x00a3dc29; + ns_coeff1_8192nu = 0x00a3d70a; + ns_coeff1_8193nu = 0x00a3d1ec; + ns_coeff2_2k = 0x0147ae14; + ns_coeff2_8k = 0x0051eb85; + break; + case BANDWIDTH_8_MHZ: + ns_coeff1_2048nu = 0x02ecfb9d; + ns_coeff1_8191nu = 0x00bb44c1; + ns_coeff1_8192nu = 0x00bb3ee7; + ns_coeff1_8193nu = 0x00bb390d; + ns_coeff2_2k = 0x01767dce; + ns_coeff2_8k = 0x005d9f74; + break; + default: + ret = -EINVAL; + } + break; + default: + err("invalid xtal"); + return -EINVAL; + } + if (ret) { + err("invalid bandwidth"); + return ret; + } + + buf[i++] = (u8) ((ns_coeff1_2048nu & 0x03000000) >> 24); + buf[i++] = (u8) ((ns_coeff1_2048nu & 0x00ff0000) >> 16); + buf[i++] = (u8) ((ns_coeff1_2048nu & 0x0000ff00) >> 8); + buf[i++] = (u8) ((ns_coeff1_2048nu & 0x000000ff)); + buf[i++] = (u8) ((ns_coeff2_2k & 0x01c00000) >> 22); + buf[i++] = (u8) ((ns_coeff2_2k & 0x003fc000) >> 14); + buf[i++] = (u8) ((ns_coeff2_2k & 0x00003fc0) >> 6); + buf[i++] = (u8) ((ns_coeff2_2k & 0x0000003f)); + buf[i++] = (u8) ((ns_coeff1_8191nu & 0x03000000) >> 24); + buf[i++] = (u8) ((ns_coeff1_8191nu & 0x00ffc000) >> 16); + buf[i++] = (u8) ((ns_coeff1_8191nu & 0x0000ff00) >> 8); + buf[i++] = (u8) ((ns_coeff1_8191nu & 0x000000ff)); + buf[i++] = (u8) ((ns_coeff1_8192nu & 0x03000000) >> 24); + buf[i++] = (u8) ((ns_coeff1_8192nu & 0x00ffc000) >> 16); + buf[i++] = (u8) ((ns_coeff1_8192nu & 0x0000ff00) >> 8); + buf[i++] = (u8) ((ns_coeff1_8192nu & 0x000000ff)); + buf[i++] = (u8) ((ns_coeff1_8193nu & 0x03000000) >> 24); + buf[i++] = (u8) ((ns_coeff1_8193nu & 0x00ffc000) >> 16); + buf[i++] = (u8) ((ns_coeff1_8193nu & 0x0000ff00) >> 8); + buf[i++] = (u8) ((ns_coeff1_8193nu & 0x000000ff)); + buf[i++] = (u8) ((ns_coeff2_8k & 0x01c00000) >> 22); + buf[i++] = (u8) ((ns_coeff2_8k & 0x003fc000) >> 14); + buf[i++] = (u8) ((ns_coeff2_8k & 0x00003fc0) >> 6); + buf[i++] = (u8) ((ns_coeff2_8k & 0x0000003f)); + + deb_info("%s: coeff:", __func__); + debug_dump(buf, sizeof(buf), deb_info); + + /* program */ + for (i = 0; i < sizeof(buf); i++) { + ret = af9013_write_reg(state, 0xae00 + i, buf[i]); + if (ret) + break; + } + + return ret; +} + +static int af9013_set_adc_ctrl(struct af9013_state *state) +{ + int ret; + u8 buf[3], tmp, i; + u32 adc_cw; + + deb_info("%s: adc_clock:%d\n", __func__, state->config.adc_clock); + + /* adc frequency type */ + switch (state->config.adc_clock) { + case 28800: /* 28.800 MHz */ + tmp = 0; + break; + case 20480: /* 20.480 MHz */ + tmp = 1; + break; + case 28000: /* 28.000 MHz */ + tmp = 2; + break; + case 25000: /* 25.000 MHz */ + tmp = 3; + break; + default: + err("invalid xtal"); + return -EINVAL; + } + + adc_cw = af913_div(state->config.adc_clock*1000, 1000000ul, 19ul); + + buf[0] = (u8) ((adc_cw & 0x000000ff)); + buf[1] = (u8) ((adc_cw & 0x0000ff00) >> 8); + buf[2] = (u8) ((adc_cw & 0x00ff0000) >> 16); + + deb_info("%s: adc_cw:", __func__); + debug_dump(buf, sizeof(buf), deb_info); + + /* program */ + for (i = 0; i < sizeof(buf); i++) { + ret = af9013_write_reg(state, 0xd180 + i, buf[i]); + if (ret) + goto error; + } + ret = af9013_write_reg_bits(state, 0x9bd2, 0, 4, tmp); +error: + return ret; +} + +static int af9013_set_freq_ctrl(struct af9013_state *state, fe_bandwidth_t bw) +{ + int ret; + u16 addr; + u8 buf[3], i, j; + u32 adc_freq, freq_cw; + s8 bfs_spec_inv; + int if_sample_freq; + + for (j = 0; j < 3; j++) { + if (j == 0) { + addr = 0xd140; /* fcw normal */ + bfs_spec_inv = state->config.rf_spec_inv ? -1 : 1; + } else if (j == 1) { + addr = 0x9be7; /* fcw dummy ram */ + bfs_spec_inv = state->config.rf_spec_inv ? -1 : 1; + } else { + addr = 0x9bea; /* fcw inverted */ + bfs_spec_inv = state->config.rf_spec_inv ? 1 : -1; + } + + adc_freq = state->config.adc_clock * 1000; + if_sample_freq = state->config.tuner_if * 1000; + + /* TDA18271 uses different sampling freq for every bw */ + if (state->config.tuner == AF9013_TUNER_TDA18271) { + switch (bw) { + case BANDWIDTH_6_MHZ: + if_sample_freq = 3300000; /* 3.3 MHz */ + break; + case BANDWIDTH_7_MHZ: + if_sample_freq = 3800000; /* 3.8 MHz */ + break; + case BANDWIDTH_8_MHZ: + default: + if_sample_freq = 4300000; /* 4.3 MHz */ + break; + } + } + + while (if_sample_freq > (adc_freq / 2)) + if_sample_freq = if_sample_freq - adc_freq; + + if (if_sample_freq >= 0) + bfs_spec_inv = bfs_spec_inv * (-1); + else + if_sample_freq = if_sample_freq * (-1); + + freq_cw = af913_div(if_sample_freq, adc_freq, 23ul); + + if (bfs_spec_inv == -1) + freq_cw = 0x00800000 - freq_cw; + + buf[0] = (u8) ((freq_cw & 0x000000ff)); + buf[1] = (u8) ((freq_cw & 0x0000ff00) >> 8); + buf[2] = (u8) ((freq_cw & 0x007f0000) >> 16); + + + deb_info("%s: freq_cw:", __func__); + debug_dump(buf, sizeof(buf), deb_info); + + /* program */ + for (i = 0; i < sizeof(buf); i++) { + ret = af9013_write_reg(state, addr++, buf[i]); + if (ret) + goto error; + } + } +error: + return ret; +} + +static int af9013_set_ofdm_params(struct af9013_state *state, + struct dvb_ofdm_parameters *params, u8 *auto_mode) +{ + int ret; + u8 i, buf[3] = {0, 0, 0}; + *auto_mode = 0; /* set if parameters are requested to auto set */ + + switch (params->transmission_mode) { + case TRANSMISSION_MODE_AUTO: + *auto_mode = 1; + case TRANSMISSION_MODE_2K: + break; + case TRANSMISSION_MODE_8K: + buf[0] |= (1 << 0); + break; + default: + return -EINVAL; + } + + switch (params->guard_interval) { + case GUARD_INTERVAL_AUTO: + *auto_mode = 1; + case GUARD_INTERVAL_1_32: + break; + case GUARD_INTERVAL_1_16: + buf[0] |= (1 << 2); + break; + case GUARD_INTERVAL_1_8: + buf[0] |= (2 << 2); + break; + case GUARD_INTERVAL_1_4: + buf[0] |= (3 << 2); + break; + default: + return -EINVAL; + } + + switch (params->hierarchy_information) { + case HIERARCHY_AUTO: + *auto_mode = 1; + case HIERARCHY_NONE: + break; + case HIERARCHY_1: + buf[0] |= (1 << 4); + break; + case HIERARCHY_2: + buf[0] |= (2 << 4); + break; + case HIERARCHY_4: + buf[0] |= (3 << 4); + break; + default: + return -EINVAL; + }; + + switch (params->constellation) { + case QAM_AUTO: + *auto_mode = 1; + case QPSK: + break; + case QAM_16: + buf[1] |= (1 << 6); + break; + case QAM_64: + buf[1] |= (2 << 6); + break; + default: + return -EINVAL; + } + + /* Use HP. How and which case we can switch to LP? */ + buf[1] |= (1 << 4); + + switch (params->code_rate_HP) { + case FEC_AUTO: + *auto_mode = 1; + case FEC_1_2: + break; + case FEC_2_3: + buf[2] |= (1 << 0); + break; + case FEC_3_4: + buf[2] |= (2 << 0); + break; + case FEC_5_6: + buf[2] |= (3 << 0); + break; + case FEC_7_8: + buf[2] |= (4 << 0); + break; + default: + return -EINVAL; + } + + switch (params->code_rate_LP) { + case FEC_AUTO: + /* if HIERARCHY_NONE and FEC_NONE then LP FEC is set to FEC_AUTO + by dvb_frontend.c for compatibility */ + if (params->hierarchy_information != HIERARCHY_NONE) + *auto_mode = 1; + case FEC_1_2: + break; + case FEC_2_3: + buf[2] |= (1 << 3); + break; + case FEC_3_4: + buf[2] |= (2 << 3); + break; + case FEC_5_6: + buf[2] |= (3 << 3); + break; + case FEC_7_8: + buf[2] |= (4 << 3); + break; + case FEC_NONE: + if (params->hierarchy_information == HIERARCHY_AUTO) + break; + default: + return -EINVAL; + } + + switch (params->bandwidth) { + case BANDWIDTH_6_MHZ: + break; + case BANDWIDTH_7_MHZ: + buf[1] |= (1 << 2); + break; + case BANDWIDTH_8_MHZ: + buf[1] |= (2 << 2); + break; + default: + return -EINVAL; + } + + /* program */ + for (i = 0; i < sizeof(buf); i++) { + ret = af9013_write_reg(state, 0xd3c0 + i, buf[i]); + if (ret) + break; + } + + return ret; +} + +static int af9013_reset(struct af9013_state *state, u8 sleep) +{ + int ret; + u8 tmp, i; + deb_info("%s\n", __func__); + + /* enable OFDM reset */ + ret = af9013_write_reg_bits(state, 0xd417, 4, 1, 1); + if (ret) + goto error; + + /* start reset mechanism */ + ret = af9013_write_reg(state, 0xaeff, 1); + if (ret) + goto error; + + /* reset is done when bit 1 is set */ + for (i = 0; i < 150; i++) { + ret = af9013_read_reg_bits(state, 0xd417, 1, 1, &tmp); + if (ret) + goto error; + if (tmp) + break; /* reset done */ + msleep(10); + } + if (!tmp) + return -ETIMEDOUT; + + /* don't clear reset when going to sleep */ + if (!sleep) { + /* clear OFDM reset */ + ret = af9013_write_reg_bits(state, 0xd417, 1, 1, 0); + if (ret) + goto error; + + /* disable OFDM reset */ + ret = af9013_write_reg_bits(state, 0xd417, 4, 1, 0); + } +error: + return ret; +} + +static int af9013_power_ctrl(struct af9013_state *state, u8 onoff) +{ + int ret; + deb_info("%s: onoff:%d\n", __func__, onoff); + + if (onoff) { + /* power on */ + ret = af9013_write_reg_bits(state, 0xd73a, 3, 1, 0); + if (ret) + goto error; + ret = af9013_write_reg_bits(state, 0xd417, 1, 1, 0); + if (ret) + goto error; + ret = af9013_write_reg_bits(state, 0xd417, 4, 1, 0); + } else { + /* power off */ + ret = af9013_reset(state, 1); + if (ret) + goto error; + ret = af9013_write_reg_bits(state, 0xd73a, 3, 1, 1); + } +error: + return ret; +} + +static int af9013_lock_led(struct af9013_state *state, u8 onoff) +{ + deb_info("%s: onoff:%d\n", __func__, onoff); + + return af9013_write_reg_bits(state, 0xd730, 0, 1, onoff); +} + +static int af9013_set_frontend(struct dvb_frontend *fe, + struct dvb_frontend_parameters *params) +{ + struct af9013_state *state = fe->demodulator_priv; + int ret; + u8 auto_mode; /* auto set TPS */ + + deb_info("%s: freq:%d bw:%d\n", __func__, params->frequency, + params->u.ofdm.bandwidth); + + state->frequency = params->frequency; + + /* program CFOE coefficients */ + ret = af9013_set_coeff(state, params->u.ofdm.bandwidth); + if (ret) + goto error; + + /* program frequency control */ + ret = af9013_set_freq_ctrl(state, params->u.ofdm.bandwidth); + if (ret) + goto error; + + /* clear TPS lock flag (inverted flag) */ + ret = af9013_write_reg_bits(state, 0xd330, 3, 1, 1); + if (ret) + goto error; + + /* clear MPEG2 lock flag */ + ret = af9013_write_reg_bits(state, 0xd507, 6, 1, 0); + if (ret) + goto error; + + /* empty channel function */ + ret = af9013_write_reg_bits(state, 0x9bfe, 0, 1, 0); + if (ret) + goto error; + + /* empty DVB-T channel function */ + ret = af9013_write_reg_bits(state, 0x9bc2, 0, 1, 0); + if (ret) + goto error; + + /* program tuner */ + if (fe->ops.tuner_ops.set_params) + fe->ops.tuner_ops.set_params(fe, params); + + /* program TPS and bandwidth, check if auto mode needed */ + ret = af9013_set_ofdm_params(state, ¶ms->u.ofdm, &auto_mode); + if (ret) + goto error; + + if (auto_mode) { + /* clear easy mode flag */ + ret = af9013_write_reg(state, 0xaefd, 0); + deb_info("%s: auto TPS\n", __func__); + } else { + /* set easy mode flag */ + ret = af9013_write_reg(state, 0xaefd, 1); + if (ret) + goto error; + ret = af9013_write_reg(state, 0xaefe, 0); + deb_info("%s: manual TPS\n", __func__); + } + if (ret) + goto error; + + /* everything is set, lets try to receive channel - OFSM GO! */ + ret = af9013_write_reg(state, 0xffff, 0); + if (ret) + goto error; + +error: + return ret; +} + +static int af9013_get_frontend(struct dvb_frontend *fe, + struct dvb_frontend_parameters *p) +{ + struct af9013_state *state = fe->demodulator_priv; + int ret; + u8 i, buf[3]; + deb_info("%s\n", __func__); + + /* read TPS registers */ + for (i = 0; i < 3; i++) { + ret = af9013_read_reg(state, 0xd3c0 + i, &buf[i]); + if (ret) + goto error; + } + + switch ((buf[1] >> 6) & 3) { + case 0: + p->u.ofdm.constellation = QPSK; + break; + case 1: + p->u.ofdm.constellation = QAM_16; + break; + case 2: + p->u.ofdm.constellation = QAM_64; + break; + } + + switch ((buf[0] >> 0) & 3) { + case 0: + p->u.ofdm.transmission_mode = TRANSMISSION_MODE_2K; + break; + case 1: + p->u.ofdm.transmission_mode = TRANSMISSION_MODE_8K; + } + + switch ((buf[0] >> 2) & 3) { + case 0: + p->u.ofdm.guard_interval = GUARD_INTERVAL_1_32; + break; + case 1: + p->u.ofdm.guard_interval = GUARD_INTERVAL_1_16; + break; + case 2: + p->u.ofdm.guard_interval = GUARD_INTERVAL_1_8; + break; + case 3: + p->u.ofdm.guard_interval = GUARD_INTERVAL_1_4; + break; + } + + switch ((buf[0] >> 4) & 7) { + case 0: + p->u.ofdm.hierarchy_information = HIERARCHY_NONE; + break; + case 1: + p->u.ofdm.hierarchy_information = HIERARCHY_1; + break; + case 2: + p->u.ofdm.hierarchy_information = HIERARCHY_2; + break; + case 3: + p->u.ofdm.hierarchy_information = HIERARCHY_4; + break; + } + + switch ((buf[2] >> 0) & 7) { + case 0: + p->u.ofdm.code_rate_HP = FEC_1_2; + break; + case 1: + p->u.ofdm.code_rate_HP = FEC_2_3; + break; + case 2: + p->u.ofdm.code_rate_HP = FEC_3_4; + break; + case 3: + p->u.ofdm.code_rate_HP = FEC_5_6; + break; + case 4: + p->u.ofdm.code_rate_HP = FEC_7_8; + break; + } + + switch ((buf[2] >> 3) & 7) { + case 0: + p->u.ofdm.code_rate_LP = FEC_1_2; + break; + case 1: + p->u.ofdm.code_rate_LP = FEC_2_3; + break; + case 2: + p->u.ofdm.code_rate_LP = FEC_3_4; + break; + case 3: + p->u.ofdm.code_rate_LP = FEC_5_6; + break; + case 4: + p->u.ofdm.code_rate_LP = FEC_7_8; + break; + } + + switch ((buf[1] >> 2) & 3) { + case 0: + p->u.ofdm.bandwidth = BANDWIDTH_6_MHZ; + break; + case 1: + p->u.ofdm.bandwidth = BANDWIDTH_7_MHZ; + break; + case 2: + p->u.ofdm.bandwidth = BANDWIDTH_8_MHZ; + break; + } + + p->inversion = INVERSION_AUTO; + p->frequency = state->frequency; + +error: + return ret; +} + +static int af9013_update_ber_unc(struct dvb_frontend *fe) +{ + struct af9013_state *state = fe->demodulator_priv; + int ret; + u8 buf[3], i; + u32 error_bit_count = 0; + u32 total_bit_count = 0; + u32 abort_packet_count = 0; + u64 numerator, denominator; + + state->ber = 0; + + /* check if error bit count is ready */ + ret = af9013_read_reg_bits(state, 0xd391, 4, 1, &buf[0]); + if (ret) + goto error; + if (!buf[0]) + goto exit; + + /* get RSD packet abort count */ + for (i = 0; i < 2; i++) { + ret = af9013_read_reg(state, 0xd38a + i, &buf[i]); + if (ret) + goto error; + } + abort_packet_count = (buf[1] << 8) + buf[0]; + + /* get error bit count */ + for (i = 0; i < 3; i++) { + ret = af9013_read_reg(state, 0xd387 + i, &buf[i]); + if (ret) + goto error; + } + error_bit_count = (buf[2] << 16) + (buf[1] << 8) + buf[0]; + error_bit_count = error_bit_count - abort_packet_count * 8 * 8; + + /* get used RSD counting period (10000 RSD packets used) */ + for (i = 0; i < 2; i++) { + ret = af9013_read_reg(state, 0xd385 + i, &buf[i]); + if (ret) + goto error; + } + total_bit_count = (buf[1] << 8) + buf[0]; + total_bit_count = total_bit_count - abort_packet_count; + total_bit_count = total_bit_count * 204 * 8; + + if (total_bit_count) { + numerator = error_bit_count * 1000000000; + denominator = total_bit_count; + state->ber = numerator / denominator; + } + + state->ucblocks += abort_packet_count; + + deb_info("%s: err bits:%d total bits:%d abort count:%d\n", __func__, + error_bit_count, total_bit_count, abort_packet_count); + + /* set BER counting range */ + ret = af9013_write_reg(state, 0xd385, 10000 & 0xff); + if (ret) + goto error; + ret = af9013_write_reg(state, 0xd386, 10000 >> 8); + if (ret) + goto error; + /* reset and start BER counter */ + ret = af9013_write_reg_bits(state, 0xd391, 4, 1, 1); + if (ret) + goto error; + +exit: +error: + return ret; +} + +static int af9013_update_snr(struct dvb_frontend *fe) +{ + struct af9013_state *state = fe->demodulator_priv; + int ret; + u8 buf[3], i, len; + u32 quant = 0; + struct snr_table *snr_table; + + /* check if quantizer ready (for snr) */ + ret = af9013_read_reg_bits(state, 0xd2e1, 3, 1, &buf[0]); + if (ret) + goto error; + if (buf[0]) { + /* quantizer ready - read it */ + for (i = 0; i < 3; i++) { + ret = af9013_read_reg(state, 0xd2e3 + i, &buf[i]); + if (ret) + goto error; + } + quant = (buf[2] << 16) + (buf[1] << 8) + buf[0]; + + /* read current constellation */ + ret = af9013_read_reg(state, 0xd3c1, &buf[0]); + if (ret) + goto error; + + switch ((buf[0] >> 6) & 3) { + case 0: + len = ARRAY_SIZE(qpsk_snr_table); + snr_table = qpsk_snr_table; + break; + case 1: + len = ARRAY_SIZE(qam16_snr_table); + snr_table = qam16_snr_table; + break; + case 2: + len = ARRAY_SIZE(qam64_snr_table); + snr_table = qam64_snr_table; + break; + default: + len = 0; + break; + } + + if (len) { + for (i = 0; i < len; i++) { + if (quant < snr_table[i].val) { + state->snr = snr_table[i].snr * 10; + break; + } + } + } + + /* set quantizer super frame count */ + ret = af9013_write_reg(state, 0xd2e2, 1); + if (ret) + goto error; + + /* check quantizer availability */ + for (i = 0; i < 10; i++) { + msleep(10); + ret = af9013_read_reg_bits(state, 0xd2e6, 0, 1, + &buf[0]); + if (ret) + goto error; + if (!buf[0]) + break; + } + + /* reset quantizer */ + ret = af9013_write_reg_bits(state, 0xd2e1, 3, 1, 1); + if (ret) + goto error; + } + +error: + return ret; +} + +static int af9013_update_signal_strength(struct dvb_frontend *fe) +{ + struct af9013_state *state = fe->demodulator_priv; + int ret; + u8 tmp0; + u8 rf_gain, rf_50, rf_80, if_gain, if_50, if_80; + int signal_strength; + + deb_info("%s\n", __func__); + + state->signal_strength = 0; + + ret = af9013_read_reg_bits(state, 0x9bee, 0, 1, &tmp0); + if (ret) + goto error; + if (tmp0) { + ret = af9013_read_reg(state, 0x9bbd, &rf_50); + if (ret) + goto error; + ret = af9013_read_reg(state, 0x9bd0, &rf_80); + if (ret) + goto error; + ret = af9013_read_reg(state, 0x9be2, &if_50); + if (ret) + goto error; + ret = af9013_read_reg(state, 0x9be4, &if_80); + if (ret) + goto error; + ret = af9013_read_reg(state, 0xd07c, &rf_gain); + if (ret) + goto error; + ret = af9013_read_reg(state, 0xd07d, &if_gain); + if (ret) + goto error; + signal_strength = (0xffff / (9 * (rf_50 + if_50) - \ + 11 * (rf_80 + if_80))) * (10 * (rf_gain + if_gain) - \ + 11 * (rf_80 + if_80)); + if (signal_strength < 0) + signal_strength = 0; + else if (signal_strength > 0xffff) + signal_strength = 0xffff; + + state->signal_strength = signal_strength; + } + +error: + return ret; +} + +static int af9013_update_statistics(struct dvb_frontend *fe) +{ + struct af9013_state *state = fe->demodulator_priv; + int ret; + + if (time_before(jiffies, state->next_statistics_check)) + return 0; + + /* set minimum statistic update interval */ + state->next_statistics_check = jiffies + msecs_to_jiffies(1200); + + ret = af9013_update_signal_strength(fe); + if (ret) + goto error; + ret = af9013_update_snr(fe); + if (ret) + goto error; + ret = af9013_update_ber_unc(fe); + if (ret) + goto error; + +error: + return ret; +} + +static int af9013_get_tune_settings(struct dvb_frontend *fe, + struct dvb_frontend_tune_settings *fesettings) +{ + fesettings->min_delay_ms = 800; + fesettings->step_size = 0; + fesettings->max_drift = 0; + + return 0; +} + +static int af9013_read_status(struct dvb_frontend *fe, fe_status_t *status) +{ + struct af9013_state *state = fe->demodulator_priv; + int ret = 0; + u8 tmp; + *status = 0; + + /* TPS lock */ + ret = af9013_read_reg_bits(state, 0xd330, 3, 1, &tmp); + if (ret) + goto error; + if (tmp) + *status |= FE_HAS_VITERBI | FE_HAS_CARRIER | FE_HAS_SIGNAL; + + /* MPEG2 lock */ + ret = af9013_read_reg_bits(state, 0xd507, 6, 1, &tmp); + if (ret) + goto error; + if (tmp) + *status |= FE_HAS_SYNC | FE_HAS_LOCK; + + if (!*status & FE_HAS_SIGNAL) { + /* AGC lock */ + ret = af9013_read_reg_bits(state, 0xd1a0, 6, 1, &tmp); + if (ret) + goto error; + if (tmp) + *status |= FE_HAS_SIGNAL; + } + + if (!*status & FE_HAS_CARRIER) { + /* CFO lock */ + ret = af9013_read_reg_bits(state, 0xd333, 7, 1, &tmp); + if (ret) + goto error; + if (tmp) + *status |= FE_HAS_CARRIER; + } + + if (!*status & FE_HAS_CARRIER) { + /* SFOE lock */ + ret = af9013_read_reg_bits(state, 0xd334, 6, 1, &tmp); + if (ret) + goto error; + if (tmp) + *status |= FE_HAS_CARRIER; + } + + ret = af9013_update_statistics(fe); + +error: + return ret; +} + + +static int af9013_read_ber(struct dvb_frontend *fe, u32 *ber) +{ + struct af9013_state *state = fe->demodulator_priv; + int ret; + ret = af9013_update_statistics(fe); + *ber = state->ber; + return ret; +} + +static int af9013_read_signal_strength(struct dvb_frontend *fe, u16 *strength) +{ + struct af9013_state *state = fe->demodulator_priv; + int ret; + ret = af9013_update_statistics(fe); + *strength = state->signal_strength; + return ret; +} + +static int af9013_read_snr(struct dvb_frontend *fe, u16 *snr) +{ + struct af9013_state *state = fe->demodulator_priv; + int ret; + ret = af9013_update_statistics(fe); + *snr = state->snr; + return ret; +} + +static int af9013_read_ucblocks(struct dvb_frontend *fe, u32 *ucblocks) +{ + struct af9013_state *state = fe->demodulator_priv; + int ret; + ret = af9013_update_statistics(fe); + *ucblocks = state->ucblocks; + return ret; +} + +static int af9013_sleep(struct dvb_frontend *fe) +{ + struct af9013_state *state = fe->demodulator_priv; + int ret; + deb_info("%s\n", __func__); + + ret = af9013_lock_led(state, 0); + if (ret) + goto error; + + ret = af9013_power_ctrl(state, 0); +error: + return ret; +} + +static int af9013_init(struct dvb_frontend *fe) +{ + struct af9013_state *state = fe->demodulator_priv; + int ret, i, len; + u8 tmp0, tmp1; + struct regdesc *init; + deb_info("%s\n", __func__); + + /* reset OFDM */ + ret = af9013_reset(state, 0); + if (ret) + goto error; + + /* power on */ + ret = af9013_power_ctrl(state, 1); + if (ret) + goto error; + + /* enable ADC */ + ret = af9013_write_reg(state, 0xd73a, 0xa4); + if (ret) + goto error; + + /* write API version to firmware */ + for (i = 0; i < sizeof(state->config.api_version); i++) { + ret = af9013_write_reg(state, 0x9bf2 + i, + state->config.api_version[i]); + if (ret) + goto error; + } + + /* program ADC control */ + ret = af9013_set_adc_ctrl(state); + if (ret) + goto error; + + /* set I2C master clock */ + ret = af9013_write_reg(state, 0xd416, 0x14); + if (ret) + goto error; + + /* set 16 embx */ + ret = af9013_write_reg_bits(state, 0xd700, 1, 1, 1); + if (ret) + goto error; + + /* set no trigger */ + ret = af9013_write_reg_bits(state, 0xd700, 2, 1, 0); + if (ret) + goto error; + + /* set read-update bit for constellation */ + ret = af9013_write_reg_bits(state, 0xd371, 1, 1, 1); + if (ret) + goto error; + + /* enable FEC monitor */ + ret = af9013_write_reg_bits(state, 0xd392, 1, 1, 1); + if (ret) + goto error; + + /* load OFSM settings */ + deb_info("%s: load ofsm settings\n", __func__); + len = ARRAY_SIZE(ofsm_init); + init = ofsm_init; + for (i = 0; i < len; i++) { + ret = af9013_write_reg_bits(state, init[i].addr, init[i].pos, + init[i].len, init[i].val); + if (ret) + goto error; + } + + /* load tuner specific settings */ + deb_info("%s: load tuner specific settings\n", __func__); + switch (state->config.tuner) { + case AF9013_TUNER_MXL5003D: + len = ARRAY_SIZE(tuner_init_mxl5003d); + init = tuner_init_mxl5003d; + break; + case AF9013_TUNER_MXL5005D: + case AF9013_TUNER_MXL5005R: + len = ARRAY_SIZE(tuner_init_mxl5005); + init = tuner_init_mxl5005; + break; + case AF9013_TUNER_ENV77H11D5: + len = ARRAY_SIZE(tuner_init_env77h11d5); + init = tuner_init_env77h11d5; + break; + case AF9013_TUNER_MT2060: + len = ARRAY_SIZE(tuner_init_mt2060); + init = tuner_init_mt2060; + break; + case AF9013_TUNER_MC44S803: + len = ARRAY_SIZE(tuner_init_mc44s803); + init = tuner_init_mc44s803; + break; + case AF9013_TUNER_QT1010: + case AF9013_TUNER_QT1010A: + len = ARRAY_SIZE(tuner_init_qt1010); + init = tuner_init_qt1010; + break; + case AF9013_TUNER_MT2060_2: + len = ARRAY_SIZE(tuner_init_mt2060_2); + init = tuner_init_mt2060_2; + break; + case AF9013_TUNER_TDA18271: + len = ARRAY_SIZE(tuner_init_tda18271); + init = tuner_init_tda18271; + break; + case AF9013_TUNER_UNKNOWN: + default: + len = ARRAY_SIZE(tuner_init_unknown); + init = tuner_init_unknown; + break; + } + + for (i = 0; i < len; i++) { + ret = af9013_write_reg_bits(state, init[i].addr, init[i].pos, + init[i].len, init[i].val); + if (ret) + goto error; + } + + /* set TS mode */ + deb_info("%s: setting ts mode\n", __func__); + tmp0 = 0; /* parallel mode */ + tmp1 = 0; /* serial mode */ + switch (state->config.output_mode) { + case AF9013_OUTPUT_MODE_PARALLEL: + tmp0 = 1; + break; + case AF9013_OUTPUT_MODE_SERIAL: + tmp1 = 1; + break; + case AF9013_OUTPUT_MODE_USB: + /* usb mode for AF9015 */ + default: + break; + } + ret = af9013_write_reg_bits(state, 0xd500, 1, 1, tmp0); /* parallel */ + if (ret) + goto error; + ret = af9013_write_reg_bits(state, 0xd500, 2, 1, tmp1); /* serial */ + if (ret) + goto error; + + /* enable lock led */ + ret = af9013_lock_led(state, 1); + if (ret) + goto error; + +error: + return ret; +} + +static struct dvb_frontend_ops af9013_ops; + +static int af9013_download_firmware(struct af9013_state *state) +{ + int i, len, packets, remainder, ret; + const struct firmware *fw; + u16 addr = 0x5100; /* firmware start address */ + u16 checksum = 0; + u8 val; + u8 fw_params[4]; + u8 *data; + u8 *fw_file = AF9013_DEFAULT_FIRMWARE; + + msleep(100); + /* check whether firmware is already running */ + ret = af9013_read_reg(state, 0x98be, &val); + if (ret) + goto error; + else + deb_info("%s: firmware status:%02x\n", __func__, val); + + if (val == 0x0c) /* fw is running, no need for download */ + goto exit; + + info("found a '%s' in cold state, will try to load a firmware", + af9013_ops.info.name); + + /* request the firmware, this will block and timeout */ + ret = request_firmware(&fw, fw_file, &state->i2c->dev); + if (ret) { + err("did not find the firmware file. (%s) " + "Please see linux/Documentation/dvb/ for more details" \ + " on firmware-problems. (%d)", + fw_file, ret); + goto error; + } + + info("downloading firmware from file '%s'", fw_file); + + /* calc checksum */ + for (i = 0; i < fw->size; i++) + checksum += fw->data[i]; + + fw_params[0] = checksum >> 8; + fw_params[1] = checksum & 0xff; + fw_params[2] = fw->size >> 8; + fw_params[3] = fw->size & 0xff; + + /* write fw checksum & size */ + ret = af9013_write_ofsm_regs(state, 0x50fc, + fw_params, sizeof(fw_params)); + if (ret) + goto error_release; + + #define FW_PACKET_MAX_DATA 16 + + packets = fw->size / FW_PACKET_MAX_DATA; + remainder = fw->size % FW_PACKET_MAX_DATA; + len = FW_PACKET_MAX_DATA; + for (i = 0; i <= packets; i++) { + if (i == packets) /* set size of the last packet */ + len = remainder; + + data = (fw->data + i * FW_PACKET_MAX_DATA); + ret = af9013_write_ofsm_regs(state, addr, data, len); + addr += FW_PACKET_MAX_DATA; + + if (ret) { + err("firmware download failed at %d with %d", i, ret); + goto error_release; + } + } + + #undef FW_PACKET_MAX_DATA + + /* request boot firmware */ + ret = af9013_write_reg(state, 0xe205, 1); + if (ret) + goto error_release; + + for (i = 0; i < 15; i++) { + msleep(100); + + /* check firmware status */ + ret = af9013_read_reg(state, 0x98be, &val); + if (ret) + goto error_release; + + deb_info("%s: firmware status:%02x\n", __func__, val); + + if (val == 0x0c || val == 0x04) /* success or fail */ + break; + } + + if (val == 0x04) { + err("firmware did not run"); + ret = -1; + } else if (val != 0x0c) { + err("firmware boot timeout"); + ret = -1; + } + +error_release: + release_firmware(fw); +error: +exit: + if (!ret) + info("found a '%s' in warm state.", af9013_ops.info.name); + return ret; +} + +static int af9013_i2c_gate_ctrl(struct dvb_frontend *fe, int enable) +{ + int ret; + struct af9013_state *state = fe->demodulator_priv; + deb_info("%s: enable:%d\n", __func__, enable); + + if (state->config.output_mode == AF9013_OUTPUT_MODE_USB) + ret = af9013_write_reg_bits(state, 0xd417, 3, 1, enable); + else + ret = af9013_write_reg_bits(state, 0xd607, 2, 1, enable); + + return ret; +} + +static void af9013_release(struct dvb_frontend *fe) +{ + struct af9013_state *state = fe->demodulator_priv; + kfree(state); +} + +static struct dvb_frontend_ops af9013_ops; + +struct dvb_frontend *af9013_attach(const struct af9013_config *config, + struct i2c_adapter *i2c) +{ + int ret; + struct af9013_state *state = NULL; + u8 buf[3], i; + + /* allocate memory for the internal state */ + state = kzalloc(sizeof(struct af9013_state), GFP_KERNEL); + if (state == NULL) + goto error; + + /* setup the state */ + state->i2c = i2c; + memcpy(&state->config, config, sizeof(struct af9013_config)); + + /* chip version */ + ret = af9013_read_reg_bits(state, 0xd733, 4, 4, &buf[2]); + if (ret) + goto error; + + /* ROM version */ + for (i = 0; i < 2; i++) { + ret = af9013_read_reg(state, 0x116b + i, &buf[i]); + if (ret) + goto error; + } + deb_info("%s: chip version:%d ROM version:%d.%d\n", __func__, + buf[2], buf[0], buf[1]); + + /* download firmware */ + if (state->config.output_mode != AF9013_OUTPUT_MODE_USB) { + ret = af9013_download_firmware(state); + if (ret) + goto error; + } + + /* firmware version */ + for (i = 0; i < 3; i++) { + ret = af9013_read_reg(state, 0x5103 + i, &buf[i]); + if (ret) + goto error; + } + info("firmware version:%d.%d.%d", buf[0], buf[1], buf[2]); + + /* settings for mp2if */ + if (state->config.output_mode == AF9013_OUTPUT_MODE_USB) { + /* AF9015 split PSB to 1.5k + 0.5k */ + ret = af9013_write_reg_bits(state, 0xd50b, 2, 1, 1); + } else { + /* AF9013 change the output bit to data7 */ + ret = af9013_write_reg_bits(state, 0xd500, 3, 1, 1); + if (ret) + goto error; + /* AF9013 set mpeg to full speed */ + ret = af9013_write_reg_bits(state, 0xd502, 4, 1, 1); + } + if (ret) + goto error; + ret = af9013_write_reg_bits(state, 0xd520, 4, 1, 1); + if (ret) + goto error; + + /* set GPIOs */ + for (i = 0; i < sizeof(state->config.gpio); i++) { + ret = af9013_set_gpio(state, i, state->config.gpio[i]); + if (ret) + goto error; + } + + /* create dvb_frontend */ + memcpy(&state->frontend.ops, &af9013_ops, + sizeof(struct dvb_frontend_ops)); + state->frontend.demodulator_priv = state; + + return &state->frontend; +error: + kfree(state); + return NULL; +} +EXPORT_SYMBOL(af9013_attach); + +static struct dvb_frontend_ops af9013_ops = { + .info = { + .name = "Afatech AF9013 DVB-T", + .type = FE_OFDM, + .frequency_min = 174000000, + .frequency_max = 862000000, + .frequency_stepsize = 250000, + .frequency_tolerance = 0, + .caps = + FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 | + FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO | + FE_CAN_QPSK | FE_CAN_QAM_16 | + FE_CAN_QAM_64 | FE_CAN_QAM_AUTO | + FE_CAN_TRANSMISSION_MODE_AUTO | + FE_CAN_GUARD_INTERVAL_AUTO | + FE_CAN_HIERARCHY_AUTO | + FE_CAN_RECOVER | + FE_CAN_MUTE_TS + }, + + .release = af9013_release, + .init = af9013_init, + .sleep = af9013_sleep, + .i2c_gate_ctrl = af9013_i2c_gate_ctrl, + + .set_frontend = af9013_set_frontend, + .get_frontend = af9013_get_frontend, + + .get_tune_settings = af9013_get_tune_settings, + + .read_status = af9013_read_status, + .read_ber = af9013_read_ber, + .read_signal_strength = af9013_read_signal_strength, + .read_snr = af9013_read_snr, + .read_ucblocks = af9013_read_ucblocks, +}; + +module_param_named(debug, af9013_debug, int, 0644); +MODULE_PARM_DESC(debug, "Turn on/off frontend debugging (default:off)."); + +MODULE_AUTHOR("Antti Palosaari "); +MODULE_DESCRIPTION("Afatech AF9013 DVB-T demodulator driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/dvb/frontends/af9013.h b/drivers/media/dvb/frontends/af9013.h new file mode 100644 index 0000000..28b90c9 --- /dev/null +++ b/drivers/media/dvb/frontends/af9013.h @@ -0,0 +1,107 @@ +/* + * DVB USB Linux driver for Afatech AF9015 DVB-T USB2.0 receiver + * + * Copyright (C) 2007 Antti Palosaari + * + * Thanks to Afatech who kindly provided information. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + */ + +#ifndef _AF9013_H_ +#define _AF9013_H_ + +#include + +enum af9013_ts_mode { + AF9013_OUTPUT_MODE_PARALLEL, + AF9013_OUTPUT_MODE_SERIAL, + AF9013_OUTPUT_MODE_USB, /* only for AF9015 */ +}; + +enum af9013_tuner { + AF9013_TUNER_MXL5003D = 3, /* MaxLinear */ + AF9013_TUNER_MXL5005D = 13, /* MaxLinear */ + AF9013_TUNER_MXL5005R = 30, /* MaxLinear */ + AF9013_TUNER_ENV77H11D5 = 129, /* Panasonic */ + AF9013_TUNER_MT2060 = 130, /* Microtune */ + AF9013_TUNER_MC44S803 = 133, /* Freescale */ + AF9013_TUNER_QT1010 = 134, /* Quantek */ + AF9013_TUNER_UNKNOWN = 140, /* for can tuners ? */ + AF9013_TUNER_MT2060_2 = 147, /* Microtune */ + AF9013_TUNER_TDA18271 = 156, /* NXP */ + AF9013_TUNER_QT1010A = 162, /* Quantek */ +}; + +/* AF9013/5 GPIOs (mostly guessed) + demod#1-gpio#0 - set demod#2 i2c-addr for dual devices + demod#1-gpio#1 - xtal setting (?) + demod#1-gpio#3 - tuner#1 + demod#2-gpio#0 - tuner#2 + demod#2-gpio#1 - xtal setting (?) +*/ +#define AF9013_GPIO_ON (1 << 0) +#define AF9013_GPIO_EN (1 << 1) +#define AF9013_GPIO_O (1 << 2) +#define AF9013_GPIO_I (1 << 3) + +#define AF9013_GPIO_LO (AF9013_GPIO_ON|AF9013_GPIO_EN) +#define AF9013_GPIO_HI (AF9013_GPIO_ON|AF9013_GPIO_EN|AF9013_GPIO_O) + +#define AF9013_GPIO_TUNER_ON (AF9013_GPIO_ON|AF9013_GPIO_EN) +#define AF9013_GPIO_TUNER_OFF (AF9013_GPIO_ON|AF9013_GPIO_EN|AF9013_GPIO_O) + +struct af9013_config { + /* demodulator's I2C address */ + u8 demod_address; + + /* frequencies in kHz */ + u32 adc_clock; + + /* tuner ID */ + u8 tuner; + + /* tuner IF */ + u16 tuner_if; + + /* TS data output mode */ + u8 output_mode:2; + + /* RF spectrum inversion */ + u8 rf_spec_inv:1; + + /* API version */ + u8 api_version[4]; + + /* GPIOs */ + u8 gpio[4]; +}; + + +#if defined(CONFIG_DVB_AF9013) || \ + (defined(CONFIG_DVB_AF9013_MODULE) && defined(MODULE)) +extern struct dvb_frontend *af9013_attach(const struct af9013_config *config, + struct i2c_adapter *i2c); +#else +static inline struct dvb_frontend *af9013_attach( +const struct af9013_config *config, struct i2c_adapter *i2c) +{ + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); + return NULL; +} +#endif /* CONFIG_DVB_AF9013 */ + +#endif /* _AF9013_H_ */ diff --git a/drivers/media/dvb/frontends/af9013_priv.h b/drivers/media/dvb/frontends/af9013_priv.h new file mode 100644 index 0000000..163e251 --- /dev/null +++ b/drivers/media/dvb/frontends/af9013_priv.h @@ -0,0 +1,869 @@ +/* + * DVB USB Linux driver for Afatech AF9015 DVB-T USB2.0 receiver + * + * Copyright (C) 2007 Antti Palosaari + * + * Thanks to Afatech who kindly provided information. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + */ + +#ifndef _AF9013_PRIV_ +#define _AF9013_PRIV_ + +#define LOG_PREFIX "af9013" +extern int af9013_debug; + +#define dprintk(var, level, args...) \ + do { if ((var & level)) printk(args); } while (0) + +#define debug_dump(b, l, func) {\ + int loop_; \ + for (loop_ = 0; loop_ < l; loop_++) \ + func("%02x ", b[loop_]); \ + func("\n");\ +} + +#define deb_info(args...) dprintk(af9013_debug, 0x01, args) + +#undef err +#define err(f, arg...) printk(KERN_ERR LOG_PREFIX": " f "\n" , ## arg) +#undef info +#define info(f, arg...) printk(KERN_INFO LOG_PREFIX": " f "\n" , ## arg) +#undef warn +#define warn(f, arg...) printk(KERN_WARNING LOG_PREFIX": " f "\n" , ## arg) + +#define AF9013_DEFAULT_FIRMWARE "dvb-fe-af9013.fw" + +struct regdesc { + u16 addr; + u8 pos:4; + u8 len:4; + u8 val; +}; + +struct snr_table { + u32 val; + u8 snr; +}; + +/* QPSK SNR lookup table */ +static struct snr_table qpsk_snr_table[] = { + { 0x0b4771, 0 }, + { 0x0c1aed, 1 }, + { 0x0d0d27, 2 }, + { 0x0e4d19, 3 }, + { 0x0e5da8, 4 }, + { 0x107097, 5 }, + { 0x116975, 6 }, + { 0x1252d9, 7 }, + { 0x131fa4, 8 }, + { 0x13d5e1, 9 }, + { 0x148e53, 10 }, + { 0x15358b, 11 }, + { 0x15dd29, 12 }, + { 0x168112, 13 }, + { 0x170b61, 14 }, + { 0xffffff, 15 }, +}; + +/* QAM16 SNR lookup table */ +static struct snr_table qam16_snr_table[] = { + { 0x05eb62, 5 }, + { 0x05fecf, 6 }, + { 0x060b80, 7 }, + { 0x062501, 8 }, + { 0x064865, 9 }, + { 0x069604, 10 }, + { 0x06f356, 11 }, + { 0x07706a, 12 }, + { 0x0804d3, 13 }, + { 0x089d1a, 14 }, + { 0x093e3d, 15 }, + { 0x09e35d, 16 }, + { 0x0a7c3c, 17 }, + { 0x0afaf8, 18 }, + { 0x0b719d, 19 }, + { 0xffffff, 20 }, +}; + +/* QAM64 SNR lookup table */ +static struct snr_table qam64_snr_table[] = { + { 0x03109b, 12 }, + { 0x0310d4, 13 }, + { 0x031920, 14 }, + { 0x0322d0, 15 }, + { 0x0339fc, 16 }, + { 0x0364a1, 17 }, + { 0x038bcc, 18 }, + { 0x03c7d3, 19 }, + { 0x0408cc, 20 }, + { 0x043bed, 21 }, + { 0x048061, 22 }, + { 0x04be95, 23 }, + { 0x04fa7d, 24 }, + { 0x052405, 25 }, + { 0x05570d, 26 }, + { 0xffffff, 27 }, +}; + +static struct regdesc ofsm_init[] = { + { 0xd73a, 0, 8, 0xa1 }, + { 0xd73b, 0, 8, 0x1f }, + { 0xd73c, 4, 4, 0x0a }, + { 0xd732, 3, 1, 0x00 }, + { 0xd731, 4, 2, 0x03 }, + { 0xd73d, 7, 1, 0x01 }, + { 0xd740, 0, 1, 0x00 }, + { 0xd740, 1, 1, 0x00 }, + { 0xd740, 2, 1, 0x00 }, + { 0xd740, 3, 1, 0x01 }, + { 0xd3c1, 4, 1, 0x01 }, + { 0xd3a2, 0, 8, 0x00 }, + { 0xd3a3, 0, 8, 0x04 }, + { 0xd305, 0, 8, 0x32 }, + { 0xd306, 0, 8, 0x10 }, + { 0xd304, 0, 8, 0x04 }, + { 0x9112, 0, 1, 0x01 }, + { 0x911d, 0, 1, 0x01 }, + { 0x911a, 0, 1, 0x01 }, + { 0x911b, 0, 1, 0x01 }, + { 0x9bce, 0, 4, 0x02 }, + { 0x9116, 0, 1, 0x01 }, + { 0x9bd1, 0, 1, 0x01 }, + { 0xd2e0, 0, 8, 0xd0 }, + { 0xd2e9, 0, 4, 0x0d }, + { 0xd38c, 0, 8, 0xfc }, + { 0xd38d, 0, 8, 0x00 }, + { 0xd38e, 0, 8, 0x7e }, + { 0xd38f, 0, 8, 0x00 }, + { 0xd390, 0, 8, 0x2f }, + { 0xd145, 4, 1, 0x01 }, + { 0xd1a9, 4, 1, 0x01 }, + { 0xd158, 5, 3, 0x01 }, + { 0xd159, 0, 6, 0x06 }, + { 0xd167, 0, 8, 0x00 }, + { 0xd168, 0, 4, 0x07 }, + { 0xd1c3, 5, 3, 0x00 }, + { 0xd1c4, 0, 6, 0x00 }, + { 0xd1c5, 0, 7, 0x10 }, + { 0xd1c6, 0, 3, 0x02 }, + { 0xd080, 2, 5, 0x03 }, + { 0xd081, 4, 4, 0x09 }, + { 0xd098, 4, 4, 0x0f }, + { 0xd098, 0, 4, 0x03 }, + { 0xdbc0, 3, 1, 0x01 }, + { 0xdbc0, 4, 1, 0x01 }, + { 0xdbc7, 0, 8, 0x08 }, + { 0xdbc8, 4, 4, 0x00 }, + { 0xdbc9, 0, 5, 0x01 }, + { 0xd280, 0, 8, 0xe0 }, + { 0xd281, 0, 8, 0xff }, + { 0xd282, 0, 8, 0xff }, + { 0xd283, 0, 8, 0xc3 }, + { 0xd284, 0, 8, 0xff }, + { 0xd285, 0, 4, 0x01 }, + { 0xd0f0, 0, 7, 0x1a }, + { 0xd0f1, 4, 1, 0x01 }, + { 0xd0f2, 0, 8, 0x0c }, + { 0xd103, 0, 4, 0x08 }, + { 0xd0f8, 0, 7, 0x20 }, + { 0xd111, 5, 1, 0x00 }, + { 0xd111, 6, 1, 0x00 }, + { 0x910b, 0, 8, 0x0a }, + { 0x9115, 0, 8, 0x02 }, + { 0x910c, 0, 8, 0x02 }, + { 0x910d, 0, 8, 0x08 }, + { 0x910e, 0, 8, 0x0a }, + { 0x9bf6, 0, 8, 0x06 }, + { 0x9bf8, 0, 8, 0x02 }, + { 0x9bf7, 0, 8, 0x05 }, + { 0x9bf9, 0, 8, 0x0f }, + { 0x9bfc, 0, 8, 0x13 }, + { 0x9bd3, 0, 8, 0xff }, + { 0x9bbe, 0, 1, 0x01 }, + { 0x9bcc, 0, 1, 0x01 }, +}; + +/* Panasonic ENV77H11D5 tuner init + AF9013_TUNER_ENV77H11D5 = 129 */ +static struct regdesc tuner_init_env77h11d5[] = { + { 0x9bd5, 0, 8, 0x01 }, + { 0x9bd6, 0, 8, 0x03 }, + { 0x9bbe, 0, 8, 0x01 }, + { 0xd1a0, 1, 1, 0x01 }, + { 0xd000, 0, 1, 0x01 }, + { 0xd000, 1, 1, 0x00 }, + { 0xd001, 1, 1, 0x01 }, + { 0xd001, 0, 1, 0x00 }, + { 0xd001, 5, 1, 0x00 }, + { 0xd002, 0, 5, 0x19 }, + { 0xd003, 0, 5, 0x1a }, + { 0xd004, 0, 5, 0x19 }, + { 0xd005, 0, 5, 0x1a }, + { 0xd00e, 0, 5, 0x10 }, + { 0xd00f, 0, 3, 0x04 }, + { 0xd00f, 3, 3, 0x05 }, + { 0xd010, 0, 3, 0x04 }, + { 0xd010, 3, 3, 0x05 }, + { 0xd016, 4, 4, 0x03 }, + { 0xd01f, 0, 6, 0x0a }, + { 0xd020, 0, 6, 0x0a }, + { 0x9bda, 0, 8, 0x00 }, + { 0x9be3, 0, 8, 0x00 }, + { 0xd015, 0, 8, 0x50 }, + { 0xd016, 0, 1, 0x00 }, + { 0xd044, 0, 8, 0x46 }, + { 0xd045, 0, 1, 0x00 }, + { 0xd008, 0, 8, 0xdf }, + { 0xd009, 0, 2, 0x02 }, + { 0xd006, 0, 8, 0x44 }, + { 0xd007, 0, 2, 0x01 }, + { 0xd00c, 0, 8, 0xeb }, + { 0xd00d, 0, 2, 0x02 }, + { 0xd00a, 0, 8, 0xf4 }, + { 0xd00b, 0, 2, 0x01 }, + { 0x9bba, 0, 8, 0xf9 }, + { 0x9bc3, 0, 8, 0xdf }, + { 0x9bc4, 0, 8, 0x02 }, + { 0x9bc5, 0, 8, 0xeb }, + { 0x9bc6, 0, 8, 0x02 }, + { 0x9bc9, 0, 8, 0x52 }, + { 0xd011, 0, 8, 0x3c }, + { 0xd012, 0, 2, 0x01 }, + { 0xd013, 0, 8, 0xf7 }, + { 0xd014, 0, 2, 0x02 }, + { 0xd040, 0, 8, 0x0b }, + { 0xd041, 0, 2, 0x02 }, + { 0xd042, 0, 8, 0x4d }, + { 0xd043, 0, 2, 0x00 }, + { 0xd045, 1, 1, 0x00 }, + { 0x9bcf, 0, 1, 0x01 }, + { 0xd045, 2, 1, 0x01 }, + { 0xd04f, 0, 8, 0x9a }, + { 0xd050, 0, 1, 0x01 }, + { 0xd051, 0, 8, 0x5a }, + { 0xd052, 0, 1, 0x01 }, + { 0xd053, 0, 8, 0x50 }, + { 0xd054, 0, 8, 0x46 }, + { 0x9bd7, 0, 8, 0x0a }, + { 0x9bd8, 0, 8, 0x14 }, + { 0x9bd9, 0, 8, 0x08 }, +}; + +/* Microtune MT2060 tuner init + AF9013_TUNER_MT2060 = 130 */ +static struct regdesc tuner_init_mt2060[] = { + { 0x9bd5, 0, 8, 0x01 }, + { 0x9bd6, 0, 8, 0x07 }, + { 0xd1a0, 1, 1, 0x01 }, + { 0xd000, 0, 1, 0x01 }, + { 0xd000, 1, 1, 0x00 }, + { 0xd001, 1, 1, 0x01 }, + { 0xd001, 0, 1, 0x00 }, + { 0xd001, 5, 1, 0x00 }, + { 0xd002, 0, 5, 0x19 }, + { 0xd003, 0, 5, 0x1a }, + { 0xd004, 0, 5, 0x19 }, + { 0xd005, 0, 5, 0x1a }, + { 0xd00e, 0, 5, 0x10 }, + { 0xd00f, 0, 3, 0x04 }, + { 0xd00f, 3, 3, 0x05 }, + { 0xd010, 0, 3, 0x04 }, + { 0xd010, 3, 3, 0x05 }, + { 0xd016, 4, 4, 0x03 }, + { 0xd01f, 0, 6, 0x0a }, + { 0xd020, 0, 6, 0x0a }, + { 0x9bda, 0, 8, 0x00 }, + { 0x9be3, 0, 8, 0x00 }, + { 0x9bbe, 0, 1, 0x00 }, + { 0x9bcc, 0, 1, 0x00 }, + { 0x9bb9, 0, 8, 0x75 }, + { 0x9bcd, 0, 8, 0x24 }, + { 0x9bff, 0, 8, 0x30 }, + { 0xd015, 0, 8, 0x46 }, + { 0xd016, 0, 1, 0x00 }, + { 0xd044, 0, 8, 0x46 }, + { 0xd045, 0, 1, 0x00 }, + { 0xd008, 0, 8, 0x0f }, + { 0xd009, 0, 2, 0x02 }, + { 0xd006, 0, 8, 0x32 }, + { 0xd007, 0, 2, 0x01 }, + { 0xd00c, 0, 8, 0x36 }, + { 0xd00d, 0, 2, 0x03 }, + { 0xd00a, 0, 8, 0x35 }, + { 0xd00b, 0, 2, 0x01 }, + { 0x9bc7, 0, 8, 0x07 }, + { 0x9bc8, 0, 8, 0x90 }, + { 0x9bc3, 0, 8, 0x0f }, + { 0x9bc4, 0, 8, 0x02 }, + { 0x9bc5, 0, 8, 0x36 }, + { 0x9bc6, 0, 8, 0x03 }, + { 0x9bba, 0, 8, 0xc9 }, + { 0x9bc9, 0, 8, 0x79 }, + { 0xd011, 0, 8, 0x10 }, + { 0xd012, 0, 2, 0x01 }, + { 0xd013, 0, 8, 0x45 }, + { 0xd014, 0, 2, 0x03 }, + { 0xd040, 0, 8, 0x98 }, + { 0xd041, 0, 2, 0x00 }, + { 0xd042, 0, 8, 0xcf }, + { 0xd043, 0, 2, 0x03 }, + { 0xd045, 1, 1, 0x00 }, + { 0x9bcf, 0, 1, 0x01 }, + { 0xd045, 2, 1, 0x01 }, + { 0xd04f, 0, 8, 0x9a }, + { 0xd050, 0, 1, 0x01 }, + { 0xd051, 0, 8, 0x5a }, + { 0xd052, 0, 1, 0x01 }, + { 0xd053, 0, 8, 0x50 }, + { 0xd054, 0, 8, 0x46 }, + { 0x9bd7, 0, 8, 0x0a }, + { 0x9bd8, 0, 8, 0x14 }, + { 0x9bd9, 0, 8, 0x08 }, + { 0x9bd0, 0, 8, 0xcc }, + { 0x9be4, 0, 8, 0xa0 }, + { 0x9bbd, 0, 8, 0x8e }, + { 0x9be2, 0, 8, 0x4d }, + { 0x9bee, 0, 1, 0x01 }, +}; + +/* Microtune MT2060 tuner init + AF9013_TUNER_MT2060_2 = 147 */ +static struct regdesc tuner_init_mt2060_2[] = { + { 0x9bd5, 0, 8, 0x01 }, + { 0x9bd6, 0, 8, 0x06 }, + { 0x9bbe, 0, 8, 0x01 }, + { 0xd1a0, 1, 1, 0x01 }, + { 0xd000, 0, 1, 0x01 }, + { 0xd000, 1, 1, 0x00 }, + { 0xd001, 1, 1, 0x01 }, + { 0xd001, 0, 1, 0x00 }, + { 0xd001, 5, 1, 0x00 }, + { 0xd002, 0, 5, 0x19 }, + { 0xd003, 0, 5, 0x1a }, + { 0xd004, 0, 5, 0x19 }, + { 0xd005, 0, 5, 0x1a }, + { 0xd00e, 0, 5, 0x10 }, + { 0xd00f, 0, 3, 0x04 }, + { 0xd00f, 3, 3, 0x05 }, + { 0xd010, 0, 3, 0x04 }, + { 0xd010, 3, 3, 0x05 }, + { 0xd016, 4, 4, 0x03 }, + { 0xd01f, 0, 6, 0x0a }, + { 0xd020, 0, 6, 0x0a }, + { 0xd015, 0, 8, 0x46 }, + { 0xd016, 0, 1, 0x00 }, + { 0xd044, 0, 8, 0x46 }, + { 0xd045, 0, 1, 0x00 }, + { 0xd008, 0, 8, 0x0f }, + { 0xd009, 0, 2, 0x02 }, + { 0xd006, 0, 8, 0x32 }, + { 0xd007, 0, 2, 0x01 }, + { 0xd00c, 0, 8, 0x36 }, + { 0xd00d, 0, 2, 0x03 }, + { 0xd00a, 0, 8, 0x35 }, + { 0xd00b, 0, 2, 0x01 }, + { 0x9bc7, 0, 8, 0x07 }, + { 0x9bc8, 0, 8, 0x90 }, + { 0x9bc3, 0, 8, 0x0f }, + { 0x9bc4, 0, 8, 0x02 }, + { 0x9bc5, 0, 8, 0x36 }, + { 0x9bc6, 0, 8, 0x03 }, + { 0x9bba, 0, 8, 0xc9 }, + { 0x9bc9, 0, 8, 0x79 }, + { 0xd011, 0, 8, 0x10 }, + { 0xd012, 0, 2, 0x01 }, + { 0xd013, 0, 8, 0x45 }, + { 0xd014, 0, 2, 0x03 }, + { 0xd040, 0, 8, 0x98 }, + { 0xd041, 0, 2, 0x00 }, + { 0xd042, 0, 8, 0xcf }, + { 0xd043, 0, 2, 0x03 }, + { 0xd045, 1, 1, 0x00 }, + { 0x9bcf, 0, 8, 0x01 }, + { 0xd045, 2, 1, 0x01 }, + { 0xd04f, 0, 8, 0x9a }, + { 0xd050, 0, 1, 0x01 }, + { 0xd051, 0, 8, 0x5a }, + { 0xd052, 0, 1, 0x01 }, + { 0xd053, 0, 8, 0x96 }, + { 0xd054, 0, 8, 0x46 }, + { 0xd045, 7, 1, 0x00 }, + { 0x9bd7, 0, 8, 0x0a }, + { 0x9bd8, 0, 8, 0x14 }, + { 0x9bd9, 0, 8, 0x08 }, +}; + +/* MaxLinear MXL5003 tuner init + AF9013_TUNER_MXL5003D = 3 */ +static struct regdesc tuner_init_mxl5003d[] = { + { 0x9bd5, 0, 8, 0x01 }, + { 0x9bd6, 0, 8, 0x09 }, + { 0xd1a0, 1, 1, 0x01 }, + { 0xd000, 0, 1, 0x01 }, + { 0xd000, 1, 1, 0x00 }, + { 0xd001, 1, 1, 0x01 }, + { 0xd001, 0, 1, 0x00 }, + { 0xd001, 5, 1, 0x00 }, + { 0xd002, 0, 5, 0x19 }, + { 0xd003, 0, 5, 0x1a }, + { 0xd004, 0, 5, 0x19 }, + { 0xd005, 0, 5, 0x1a }, + { 0xd00e, 0, 5, 0x10 }, + { 0xd00f, 0, 3, 0x04 }, + { 0xd00f, 3, 3, 0x05 }, + { 0xd010, 0, 3, 0x04 }, + { 0xd010, 3, 3, 0x05 }, + { 0xd016, 4, 4, 0x03 }, + { 0xd01f, 0, 6, 0x0a }, + { 0xd020, 0, 6, 0x0a }, + { 0x9bda, 0, 8, 0x00 }, + { 0x9be3, 0, 8, 0x00 }, + { 0x9bfc, 0, 8, 0x0f }, + { 0x9bf6, 0, 8, 0x01 }, + { 0x9bbe, 0, 1, 0x01 }, + { 0xd015, 0, 8, 0x33 }, + { 0xd016, 0, 1, 0x00 }, + { 0xd044, 0, 8, 0x40 }, + { 0xd045, 0, 1, 0x00 }, + { 0xd008, 0, 8, 0x0f }, + { 0xd009, 0, 2, 0x02 }, + { 0xd006, 0, 8, 0x6c }, + { 0xd007, 0, 2, 0x00 }, + { 0xd00c, 0, 8, 0x3d }, + { 0xd00d, 0, 2, 0x00 }, + { 0xd00a, 0, 8, 0x45 }, + { 0xd00b, 0, 2, 0x01 }, + { 0x9bc7, 0, 8, 0x07 }, + { 0x9bc8, 0, 8, 0x52 }, + { 0x9bc3, 0, 8, 0x0f }, + { 0x9bc4, 0, 8, 0x02 }, + { 0x9bc5, 0, 8, 0x3d }, + { 0x9bc6, 0, 8, 0x00 }, + { 0x9bba, 0, 8, 0xa2 }, + { 0x9bc9, 0, 8, 0xa0 }, + { 0xd011, 0, 8, 0x56 }, + { 0xd012, 0, 2, 0x00 }, + { 0xd013, 0, 8, 0x50 }, + { 0xd014, 0, 2, 0x00 }, + { 0xd040, 0, 8, 0x56 }, + { 0xd041, 0, 2, 0x00 }, + { 0xd042, 0, 8, 0x50 }, + { 0xd043, 0, 2, 0x00 }, + { 0xd045, 1, 1, 0x00 }, + { 0x9bcf, 0, 8, 0x01 }, + { 0xd045, 2, 1, 0x01 }, + { 0xd04f, 0, 8, 0x9a }, + { 0xd050, 0, 1, 0x01 }, + { 0xd051, 0, 8, 0x5a }, + { 0xd052, 0, 1, 0x01 }, + { 0xd053, 0, 8, 0x50 }, + { 0xd054, 0, 8, 0x46 }, + { 0x9bd7, 0, 8, 0x0a }, + { 0x9bd8, 0, 8, 0x14 }, + { 0x9bd9, 0, 8, 0x08 }, +}; + +/* MaxLinear MXL5005 tuner init + AF9013_TUNER_MXL5005D = 13 + AF9013_TUNER_MXL5005R = 30 */ +static struct regdesc tuner_init_mxl5005[] = { + { 0x9bd5, 0, 8, 0x01 }, + { 0x9bd6, 0, 8, 0x07 }, + { 0xd1a0, 1, 1, 0x01 }, + { 0xd000, 0, 1, 0x01 }, + { 0xd000, 1, 1, 0x00 }, + { 0xd001, 1, 1, 0x01 }, + { 0xd001, 0, 1, 0x00 }, + { 0xd001, 5, 1, 0x00 }, + { 0xd002, 0, 5, 0x19 }, + { 0xd003, 0, 5, 0x1a }, + { 0xd004, 0, 5, 0x19 }, + { 0xd005, 0, 5, 0x1a }, + { 0xd00e, 0, 5, 0x10 }, + { 0xd00f, 0, 3, 0x04 }, + { 0xd00f, 3, 3, 0x05 }, + { 0xd010, 0, 3, 0x04 }, + { 0xd010, 3, 3, 0x05 }, + { 0xd016, 4, 4, 0x03 }, + { 0xd01f, 0, 6, 0x0a }, + { 0xd020, 0, 6, 0x0a }, + { 0x9bda, 0, 8, 0x01 }, + { 0x9be3, 0, 8, 0x01 }, + { 0x9bbe, 0, 1, 0x01 }, + { 0x9bcc, 0, 1, 0x01 }, + { 0x9bb9, 0, 8, 0x00 }, + { 0x9bcd, 0, 8, 0x28 }, + { 0x9bff, 0, 8, 0x24 }, + { 0xd015, 0, 8, 0x40 }, + { 0xd016, 0, 1, 0x00 }, + { 0xd044, 0, 8, 0x40 }, + { 0xd045, 0, 1, 0x00 }, + { 0xd008, 0, 8, 0x0f }, + { 0xd009, 0, 2, 0x02 }, + { 0xd006, 0, 8, 0x73 }, + { 0xd007, 0, 2, 0x01 }, + { 0xd00c, 0, 8, 0xfa }, + { 0xd00d, 0, 2, 0x01 }, + { 0xd00a, 0, 8, 0xff }, + { 0xd00b, 0, 2, 0x01 }, + { 0x9bc7, 0, 8, 0x23 }, + { 0x9bc8, 0, 8, 0x55 }, + { 0x9bc3, 0, 8, 0x01 }, + { 0x9bc4, 0, 8, 0x02 }, + { 0x9bc5, 0, 8, 0xfa }, + { 0x9bc6, 0, 8, 0x01 }, + { 0x9bba, 0, 8, 0xff }, + { 0x9bc9, 0, 8, 0xff }, + { 0x9bd3, 0, 8, 0x95 }, + { 0xd011, 0, 8, 0x70 }, + { 0xd012, 0, 2, 0x01 }, + { 0xd013, 0, 8, 0xfb }, + { 0xd014, 0, 2, 0x01 }, + { 0xd040, 0, 8, 0x70 }, + { 0xd041, 0, 2, 0x01 }, + { 0xd042, 0, 8, 0xfb }, + { 0xd043, 0, 2, 0x01 }, + { 0xd045, 1, 1, 0x00 }, + { 0x9bcf, 0, 1, 0x01 }, + { 0xd045, 2, 1, 0x01 }, + { 0xd04f, 0, 8, 0x9a }, + { 0xd050, 0, 1, 0x01 }, + { 0xd051, 0, 8, 0x5a }, + { 0xd052, 0, 1, 0x01 }, + { 0xd053, 0, 8, 0x50 }, + { 0xd054, 0, 8, 0x46 }, + { 0x9bd7, 0, 8, 0x0a }, + { 0x9bd8, 0, 8, 0x14 }, + { 0x9bd9, 0, 8, 0x08 }, + { 0x9bd0, 0, 8, 0x93 }, + { 0x9be4, 0, 8, 0xfe }, + { 0x9bbd, 0, 8, 0x63 }, + { 0x9be2, 0, 8, 0xfe }, + { 0x9bee, 0, 1, 0x01 }, +}; + +/* Quantek QT1010 tuner init + AF9013_TUNER_QT1010 = 134 + AF9013_TUNER_QT1010A = 162 */ +static struct regdesc tuner_init_qt1010[] = { + { 0x9bd5, 0, 8, 0x01 }, + { 0x9bd6, 0, 8, 0x09 }, + { 0xd1a0, 1, 1, 0x01 }, + { 0xd000, 0, 1, 0x01 }, + { 0xd000, 1, 1, 0x00 }, + { 0xd001, 1, 1, 0x01 }, + { 0xd001, 0, 1, 0x00 }, + { 0xd001, 5, 1, 0x00 }, + { 0xd002, 0, 5, 0x19 }, + { 0xd003, 0, 5, 0x1a }, + { 0xd004, 0, 5, 0x19 }, + { 0xd005, 0, 5, 0x1a }, + { 0xd00e, 0, 5, 0x10 }, + { 0xd00f, 0, 3, 0x04 }, + { 0xd00f, 3, 3, 0x05 }, + { 0xd010, 0, 3, 0x04 }, + { 0xd010, 3, 3, 0x05 }, + { 0xd016, 4, 4, 0x03 }, + { 0xd01f, 0, 6, 0x0a }, + { 0xd020, 0, 6, 0x0a }, + { 0x9bda, 0, 8, 0x01 }, + { 0x9be3, 0, 8, 0x01 }, + { 0xd015, 0, 8, 0x46 }, + { 0xd016, 0, 1, 0x00 }, + { 0xd044, 0, 8, 0x46 }, + { 0xd045, 0, 1, 0x00 }, + { 0x9bbe, 0, 1, 0x01 }, + { 0x9bcc, 0, 1, 0x01 }, + { 0x9bb9, 0, 8, 0x00 }, + { 0x9bcd, 0, 8, 0x28 }, + { 0x9bff, 0, 8, 0x20 }, + { 0xd008, 0, 8, 0x0f }, + { 0xd009, 0, 2, 0x02 }, + { 0xd006, 0, 8, 0x99 }, + { 0xd007, 0, 2, 0x01 }, + { 0xd00c, 0, 8, 0x0f }, + { 0xd00d, 0, 2, 0x02 }, + { 0xd00a, 0, 8, 0x50 }, + { 0xd00b, 0, 2, 0x01 }, + { 0x9bc7, 0, 8, 0x00 }, + { 0x9bc8, 0, 8, 0x00 }, + { 0x9bc3, 0, 8, 0x0f }, + { 0x9bc4, 0, 8, 0x02 }, + { 0x9bc5, 0, 8, 0x0f }, + { 0x9bc6, 0, 8, 0x02 }, + { 0x9bba, 0, 8, 0xc5 }, + { 0x9bc9, 0, 8, 0xff }, + { 0xd011, 0, 8, 0x58 }, + { 0xd012, 0, 2, 0x02 }, + { 0xd013, 0, 8, 0x89 }, + { 0xd014, 0, 2, 0x01 }, + { 0xd040, 0, 8, 0x58 }, + { 0xd041, 0, 2, 0x02 }, + { 0xd042, 0, 8, 0x89 }, + { 0xd043, 0, 2, 0x01 }, + { 0xd045, 1, 1, 0x00 }, + { 0x9bcf, 0, 1, 0x01 }, + { 0xd045, 2, 1, 0x01 }, + { 0xd04f, 0, 8, 0x9a }, + { 0xd050, 0, 1, 0x01 }, + { 0xd051, 0, 8, 0x5a }, + { 0xd052, 0, 1, 0x01 }, + { 0xd053, 0, 8, 0x50 }, + { 0xd054, 0, 8, 0x46 }, + { 0x9bd7, 0, 8, 0x0a }, + { 0x9bd8, 0, 8, 0x14 }, + { 0x9bd9, 0, 8, 0x08 }, + { 0x9bd0, 0, 8, 0xcd }, + { 0x9be4, 0, 8, 0xbb }, + { 0x9bbd, 0, 8, 0x93 }, + { 0x9be2, 0, 8, 0x80 }, + { 0x9bee, 0, 1, 0x01 }, +}; + +/* Freescale MC44S803 tuner init + AF9013_TUNER_MC44S803 = 133 */ +static struct regdesc tuner_init_mc44s803[] = { + { 0x9bd5, 0, 8, 0x01 }, + { 0x9bd6, 0, 8, 0x06 }, + { 0xd1a0, 1, 1, 0x01 }, + { 0xd000, 0, 1, 0x01 }, + { 0xd000, 1, 1, 0x00 }, + { 0xd001, 1, 1, 0x01 }, + { 0xd001, 0, 1, 0x00 }, + { 0xd001, 5, 1, 0x00 }, + { 0xd002, 0, 5, 0x19 }, + { 0xd003, 0, 5, 0x1a }, + { 0xd004, 0, 5, 0x19 }, + { 0xd005, 0, 5, 0x1a }, + { 0xd00e, 0, 5, 0x10 }, + { 0xd00f, 0, 3, 0x04 }, + { 0xd00f, 3, 3, 0x05 }, + { 0xd010, 0, 3, 0x04 }, + { 0xd010, 3, 3, 0x05 }, + { 0xd016, 4, 4, 0x03 }, + { 0xd01f, 0, 6, 0x0a }, + { 0xd020, 0, 6, 0x0a }, + { 0x9bda, 0, 8, 0x00 }, + { 0x9be3, 0, 8, 0x00 }, + { 0x9bf6, 0, 8, 0x01 }, + { 0x9bf8, 0, 8, 0x02 }, + { 0x9bf9, 0, 8, 0x02 }, + { 0x9bfc, 0, 8, 0x1f }, + { 0x9bbe, 0, 1, 0x01 }, + { 0x9bcc, 0, 1, 0x01 }, + { 0x9bb9, 0, 8, 0x00 }, + { 0x9bcd, 0, 8, 0x24 }, + { 0x9bff, 0, 8, 0x24 }, + { 0xd015, 0, 8, 0x46 }, + { 0xd016, 0, 1, 0x00 }, + { 0xd044, 0, 8, 0x46 }, + { 0xd045, 0, 1, 0x00 }, + { 0xd008, 0, 8, 0x01 }, + { 0xd009, 0, 2, 0x02 }, + { 0xd006, 0, 8, 0x7b }, + { 0xd007, 0, 2, 0x00 }, + { 0xd00c, 0, 8, 0x7c }, + { 0xd00d, 0, 2, 0x02 }, + { 0xd00a, 0, 8, 0xfe }, + { 0xd00b, 0, 2, 0x01 }, + { 0x9bc7, 0, 8, 0x08 }, + { 0x9bc8, 0, 8, 0x9a }, + { 0x9bc3, 0, 8, 0x01 }, + { 0x9bc4, 0, 8, 0x02 }, + { 0x9bc5, 0, 8, 0x7c }, + { 0x9bc6, 0, 8, 0x02 }, + { 0x9bba, 0, 8, 0xfc }, + { 0x9bc9, 0, 8, 0xaa }, + { 0xd011, 0, 8, 0x6b }, + { 0xd012, 0, 2, 0x00 }, + { 0xd013, 0, 8, 0x88 }, + { 0xd014, 0, 2, 0x02 }, + { 0xd040, 0, 8, 0x6b }, + { 0xd041, 0, 2, 0x00 }, + { 0xd042, 0, 8, 0x7c }, + { 0xd043, 0, 2, 0x02 }, + { 0xd045, 1, 1, 0x00 }, + { 0x9bcf, 0, 1, 0x01 }, + { 0xd045, 2, 1, 0x01 }, + { 0xd04f, 0, 8, 0x9a }, + { 0xd050, 0, 1, 0x01 }, + { 0xd051, 0, 8, 0x5a }, + { 0xd052, 0, 1, 0x01 }, + { 0xd053, 0, 8, 0x50 }, + { 0xd054, 0, 8, 0x46 }, + { 0x9bd7, 0, 8, 0x0a }, + { 0x9bd8, 0, 8, 0x14 }, + { 0x9bd9, 0, 8, 0x08 }, + { 0x9bd0, 0, 8, 0x9e }, + { 0x9be4, 0, 8, 0xff }, + { 0x9bbd, 0, 8, 0x9e }, + { 0x9be2, 0, 8, 0x25 }, + { 0x9bee, 0, 1, 0x01 }, + { 0xd73b, 3, 1, 0x00 }, +}; + +/* unknown, probably for tin can tuner, tuner init + AF9013_TUNER_UNKNOWN = 140 */ +static struct regdesc tuner_init_unknown[] = { + { 0x9bd5, 0, 8, 0x01 }, + { 0x9bd6, 0, 8, 0x02 }, + { 0xd1a0, 1, 1, 0x01 }, + { 0xd000, 0, 1, 0x01 }, + { 0xd000, 1, 1, 0x00 }, + { 0xd001, 1, 1, 0x01 }, + { 0xd001, 0, 1, 0x00 }, + { 0xd001, 5, 1, 0x00 }, + { 0xd002, 0, 5, 0x19 }, + { 0xd003, 0, 5, 0x1a }, + { 0xd004, 0, 5, 0x19 }, + { 0xd005, 0, 5, 0x1a }, + { 0xd00e, 0, 5, 0x10 }, + { 0xd00f, 0, 3, 0x04 }, + { 0xd00f, 3, 3, 0x05 }, + { 0xd010, 0, 3, 0x04 }, + { 0xd010, 3, 3, 0x05 }, + { 0xd016, 4, 4, 0x03 }, + { 0xd01f, 0, 6, 0x0a }, + { 0xd020, 0, 6, 0x0a }, + { 0x9bda, 0, 8, 0x01 }, + { 0x9be3, 0, 8, 0x01 }, + { 0xd1a0, 1, 1, 0x00 }, + { 0x9bbe, 0, 1, 0x01 }, + { 0x9bcc, 0, 1, 0x01 }, + { 0x9bb9, 0, 8, 0x00 }, + { 0x9bcd, 0, 8, 0x18 }, + { 0x9bff, 0, 8, 0x2c }, + { 0xd015, 0, 8, 0x46 }, + { 0xd016, 0, 1, 0x00 }, + { 0xd044, 0, 8, 0x46 }, + { 0xd045, 0, 1, 0x00 }, + { 0xd008, 0, 8, 0xdf }, + { 0xd009, 0, 2, 0x02 }, + { 0xd006, 0, 8, 0x44 }, + { 0xd007, 0, 2, 0x01 }, + { 0xd00c, 0, 8, 0x00 }, + { 0xd00d, 0, 2, 0x02 }, + { 0xd00a, 0, 8, 0xf6 }, + { 0xd00b, 0, 2, 0x01 }, + { 0x9bba, 0, 8, 0xf9 }, + { 0x9bc8, 0, 8, 0xaa }, + { 0x9bc3, 0, 8, 0xdf }, + { 0x9bc4, 0, 8, 0x02 }, + { 0x9bc5, 0, 8, 0x00 }, + { 0x9bc6, 0, 8, 0x02 }, + { 0x9bc9, 0, 8, 0xf0 }, + { 0xd011, 0, 8, 0x3c }, + { 0xd012, 0, 2, 0x01 }, + { 0xd013, 0, 8, 0xf7 }, + { 0xd014, 0, 2, 0x02 }, + { 0xd040, 0, 8, 0x0b }, + { 0xd041, 0, 2, 0x02 }, + { 0xd042, 0, 8, 0x4d }, + { 0xd043, 0, 2, 0x00 }, + { 0xd045, 1, 1, 0x00 }, + { 0x9bcf, 0, 1, 0x01 }, + { 0xd045, 2, 1, 0x01 }, + { 0xd04f, 0, 8, 0x9a }, + { 0xd050, 0, 1, 0x01 }, + { 0xd051, 0, 8, 0x5a }, + { 0xd052, 0, 1, 0x01 }, + { 0xd053, 0, 8, 0x50 }, + { 0xd054, 0, 8, 0x46 }, + { 0x9bd7, 0, 8, 0x0a }, + { 0x9bd8, 0, 8, 0x14 }, + { 0x9bd9, 0, 8, 0x08 }, +}; + +/* NXP TDA18271 tuner init + AF9013_TUNER_TDA18271 = 156 */ +static struct regdesc tuner_init_tda18271[] = { + { 0x9bd5, 0, 8, 0x01 }, + { 0x9bd6, 0, 8, 0x04 }, + { 0xd1a0, 1, 1, 0x01 }, + { 0xd000, 0, 1, 0x01 }, + { 0xd000, 1, 1, 0x00 }, + { 0xd001, 1, 1, 0x01 }, + { 0xd001, 0, 1, 0x00 }, + { 0xd001, 5, 1, 0x00 }, + { 0xd002, 0, 5, 0x19 }, + { 0xd003, 0, 5, 0x1a }, + { 0xd004, 0, 5, 0x19 }, + { 0xd005, 0, 5, 0x1a }, + { 0xd00e, 0, 5, 0x10 }, + { 0xd00f, 0, 3, 0x04 }, + { 0xd00f, 3, 3, 0x05 }, + { 0xd010, 0, 3, 0x04 }, + { 0xd010, 3, 3, 0x05 }, + { 0xd016, 4, 4, 0x03 }, + { 0xd01f, 0, 6, 0x0a }, + { 0xd020, 0, 6, 0x0a }, + { 0x9bda, 0, 8, 0x01 }, + { 0x9be3, 0, 8, 0x01 }, + { 0xd1a0, 1, 1, 0x00 }, + { 0x9bbe, 0, 1, 0x01 }, + { 0x9bcc, 0, 1, 0x01 }, + { 0x9bb9, 0, 8, 0x00 }, + { 0x9bcd, 0, 8, 0x18 }, + { 0x9bff, 0, 8, 0x2c }, + { 0xd015, 0, 8, 0x46 }, + { 0xd016, 0, 1, 0x00 }, + { 0xd044, 0, 8, 0x46 }, + { 0xd045, 0, 1, 0x00 }, + { 0xd008, 0, 8, 0xdf }, + { 0xd009, 0, 2, 0x02 }, + { 0xd006, 0, 8, 0x44 }, + { 0xd007, 0, 2, 0x01 }, + { 0xd00c, 0, 8, 0x00 }, + { 0xd00d, 0, 2, 0x02 }, + { 0xd00a, 0, 8, 0xf6 }, + { 0xd00b, 0, 2, 0x01 }, + { 0x9bba, 0, 8, 0xf9 }, + { 0x9bc8, 0, 8, 0xaa }, + { 0x9bc3, 0, 8, 0xdf }, + { 0x9bc4, 0, 8, 0x02 }, + { 0x9bc5, 0, 8, 0x00 }, + { 0x9bc6, 0, 8, 0x02 }, + { 0x9bc9, 0, 8, 0xf0 }, + { 0xd011, 0, 8, 0x3c }, + { 0xd012, 0, 2, 0x01 }, + { 0xd013, 0, 8, 0xf7 }, + { 0xd014, 0, 2, 0x02 }, + { 0xd040, 0, 8, 0x0b }, + { 0xd041, 0, 2, 0x02 }, + { 0xd042, 0, 8, 0x4d }, + { 0xd043, 0, 2, 0x00 }, + { 0xd045, 1, 1, 0x00 }, + { 0x9bcf, 0, 1, 0x01 }, + { 0xd045, 2, 1, 0x01 }, + { 0xd04f, 0, 8, 0x9a }, + { 0xd050, 0, 1, 0x01 }, + { 0xd051, 0, 8, 0x5a }, + { 0xd052, 0, 1, 0x01 }, + { 0xd053, 0, 8, 0x50 }, + { 0xd054, 0, 8, 0x46 }, + { 0x9bd7, 0, 8, 0x0a }, + { 0x9bd8, 0, 8, 0x14 }, + { 0x9bd9, 0, 8, 0x08 }, + { 0x9bd0, 0, 8, 0xa8 }, + { 0x9be4, 0, 8, 0x7f }, + { 0x9bbd, 0, 8, 0xa8 }, + { 0x9be2, 0, 8, 0x20 }, + { 0x9bee, 0, 1, 0x01 }, +}; + +#endif /* _AF9013_PRIV_ */ -- cgit v0.10.2 From 80619de8117701cad1fb5526be6fcfe6fc2a6cc2 Mon Sep 17 00:00:00 2001 From: Antti Palosaari Date: Mon, 15 Sep 2008 17:18:09 -0300 Subject: V4L/DVB (8972): initial driver for af9015 chipset - initial driver for the Afatech AF9015 chipset Thanks-to: Mark Spieth Thanks-to: Lee Essen Thanks-to: Luca Olivetti Thanks-to: Andrew Leech Thanks-to: Nick Andrew Thanks-to: Rafael Antoniello Thanks-to: Jarryd Beck Thanks-to: Jose Alberto Reguero Thanks-to: Benjamin Larsson Thanks-to: Wolfgang Breyha Signed-off-by: Antti Palosaari Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/dvb/dvb-usb/Kconfig b/drivers/media/dvb/dvb-usb/Kconfig index 1d9e98c..b35d7f0 100644 --- a/drivers/media/dvb/dvb-usb/Kconfig +++ b/drivers/media/dvb/dvb-usb/Kconfig @@ -271,3 +271,15 @@ config DVB_USB_DTV5100 select MEDIA_TUNER_QT1010 if !DVB_FE_CUSTOMISE help Say Y here to support the AME DTV-5100 USB2.0 DVB-T receiver. + +config DVB_USB_AF9015 + tristate "Afatech AF9015 DVB-T USB2.0 support" + depends on DVB_USB && EXPERIMENTAL + select DVB_AF9013 + select DVB_PLL if !DVB_FE_CUSTOMISE + select MEDIA_TUNER_MT2060 if !DVB_FE_CUSTOMISE + select MEDIA_TUNER_QT1010 if !DVB_FE_CUSTOMISE + select MEDIA_TUNER_TDA18271 if !DVB_FE_CUSTOMISE + select MEDIA_TUNER_MXL5005S if !DVB_FE_CUSTOMISE + help + Say Y here to support the Afatech AF9015 based DVB-T USB2.0 receiver diff --git a/drivers/media/dvb/dvb-usb/Makefile b/drivers/media/dvb/dvb-usb/Makefile index 116544f..ece8c9d 100644 --- a/drivers/media/dvb/dvb-usb/Makefile +++ b/drivers/media/dvb/dvb-usb/Makefile @@ -70,6 +70,9 @@ obj-$(CONFIG_DVB_USB_DW2102) += dvb-usb-dw2102.o dvb-usb-dtv5100-objs = dtv5100.o obj-$(CONFIG_DVB_USB_DTV5100) += dvb-usb-dtv5100.o +dvb-usb-af9015-objs = af9015.o +obj-$(CONFIG_DVB_USB_AF9015) += dvb-usb-af9015.o + EXTRA_CFLAGS += -Idrivers/media/dvb/dvb-core/ -Idrivers/media/dvb/frontends/ # due to tuner-xc3028 EXTRA_CFLAGS += -Idrivers/media/common/tuners diff --git a/drivers/media/dvb/dvb-usb/af9015.c b/drivers/media/dvb/dvb-usb/af9015.c new file mode 100644 index 0000000..a284648 --- /dev/null +++ b/drivers/media/dvb/dvb-usb/af9015.c @@ -0,0 +1,1459 @@ +/* + * DVB USB Linux driver for Afatech AF9015 DVB-T USB2.0 receiver + * + * Copyright (C) 2007 Antti Palosaari + * + * Thanks to Afatech who kindly provided information. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + */ + +#include "af9015.h" +#include "af9013.h" +#include "mt2060.h" +#include "qt1010.h" +#include "tda18271.h" +#include "mxl5005s.h" +#if 0 +#include "mc44s80x.h" +#endif + +int dvb_usb_af9015_debug; +module_param_named(debug, dvb_usb_af9015_debug, int, 0644); +MODULE_PARM_DESC(debug, "set debugging level" DVB_USB_DEBUG_STATUS); +int dvb_usb_af9015_remote; +module_param_named(remote, dvb_usb_af9015_remote, int, 0644); +MODULE_PARM_DESC(remote, "select remote"); +int dvb_usb_af9015_dual_mode; +module_param_named(dual_mode, dvb_usb_af9015_dual_mode, int, 0644); +MODULE_PARM_DESC(dual_mode, "enable dual mode"); +DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); + +static DEFINE_MUTEX(af9015_usb_mutex); + +static struct af9015_config af9015_config; +static struct dvb_usb_device_properties af9015_properties[2]; +int af9015_properties_count = ARRAY_SIZE(af9015_properties); + +static struct af9013_config af9015_af9013_config[] = { + { + .demod_address = AF9015_I2C_DEMOD, + .output_mode = AF9013_OUTPUT_MODE_USB, + .api_version = { 0, 1, 9, 0 }, + .gpio[0] = AF9013_GPIO_HI, + .gpio[1] = AF9013_GPIO_LO, + .gpio[3] = AF9013_GPIO_TUNER_ON, + + }, { + .output_mode = AF9013_OUTPUT_MODE_SERIAL, + .api_version = { 0, 1, 9, 0 }, + .gpio[0] = AF9013_GPIO_TUNER_ON, + .gpio[1] = AF9013_GPIO_LO, + } +}; + +static int af9015_rw_udev(struct usb_device *udev, struct req_t *req) +{ + int act_len, ret; + u8 buf[64]; + u8 write = 1; + u8 msg_len = 8; + static u8 seq; /* packet sequence number */ + + if (mutex_lock_interruptible(&af9015_usb_mutex) < 0) + return -EAGAIN; + + buf[0] = req->cmd; + buf[1] = seq++; + buf[2] = req->i2c_addr; + buf[3] = req->addr >> 8; + buf[4] = req->addr & 0xff; + buf[5] = req->mbox; + buf[6] = req->addr_len; + buf[7] = req->data_len; + + switch (req->cmd) { + case GET_CONFIG: + case BOOT: + case READ_MEMORY: + case RECONNECT_USB: + case GET_IR_CODE: + write = 0; + break; + case READ_I2C: + write = 0; + buf[2] |= 0x01; /* set I2C direction */ + case WRITE_I2C: + buf[0] = READ_WRITE_I2C; + break; + case WRITE_MEMORY: + if (((req->addr & 0xff00) == 0xff00) || + ((req->addr & 0xae00) == 0xae00)) + buf[0] = WRITE_VIRTUAL_MEMORY; + case WRITE_VIRTUAL_MEMORY: + case COPY_FIRMWARE: + case DOWNLOAD_FIRMWARE: + break; + default: + err("unknown command:%d", req->cmd); + ret = -1; + goto error_unlock; + } + + /* write requested */ + if (write) { + memcpy(&buf[8], req->data, req->data_len); + msg_len += req->data_len; + } + deb_xfer(">>> "); + debug_dump(buf, msg_len, deb_xfer); + + /* send req */ + ret = usb_bulk_msg(udev, usb_sndbulkpipe(udev, 0x02), buf, msg_len, + &act_len, AF9015_USB_TIMEOUT); + if (ret) + err("bulk message failed:%d (%d/%d)", ret, msg_len, act_len); + else + if (act_len != msg_len) + ret = -1; /* all data is not send */ + if (ret) + goto error_unlock; + + /* no ack for those packets */ + if (req->cmd == DOWNLOAD_FIRMWARE || req->cmd == RECONNECT_USB) + goto exit_unlock; + + /* receive ack and data if read req */ + msg_len = 1 + 1 + req->data_len; /* seq + status + data len */ + ret = usb_bulk_msg(udev, usb_rcvbulkpipe(udev, 0x81), buf, msg_len, + &act_len, AF9015_USB_TIMEOUT); + if (ret) { + err("recv bulk message failed:%d", ret); + ret = -1; + goto error_unlock; + } + + deb_xfer("<<< "); + debug_dump(buf, act_len, deb_xfer); + + /* remote controller query status is 1 if remote code is not received */ + if (req->cmd == GET_IR_CODE && buf[1] == 1) { + buf[1] = 0; /* clear command "error" status */ + memset(&buf[2], 0, req->data_len); + buf[3] = 1; /* no remote code received mark */ + } + + /* check status */ + if (buf[1]) { + err("command failed:%d", buf[1]); + ret = -1; + goto error_unlock; + } + + /* read request, copy returned data to return buf */ + if (!write) + memcpy(req->data, &buf[2], req->data_len); + +error_unlock: +exit_unlock: + mutex_unlock(&af9015_usb_mutex); + + return ret; +} + +static int af9015_ctrl_msg(struct dvb_usb_device *d, struct req_t *req) +{ + return af9015_rw_udev(d->udev, req); +} + +static int af9015_write_regs(struct dvb_usb_device *d, u16 addr, u8 *val, + u8 len) +{ + struct req_t req = {WRITE_MEMORY, AF9015_I2C_DEMOD, addr, 0, 0, len, + val}; + return af9015_ctrl_msg(d, &req); +} + +static int af9015_write_reg(struct dvb_usb_device *d, u16 addr, u8 val) +{ + return af9015_write_regs(d, addr, &val, 1); +} + +static int af9015_read_reg(struct dvb_usb_device *d, u16 addr, u8 *val) +{ + struct req_t req = {READ_MEMORY, AF9015_I2C_DEMOD, addr, 0, 0, 1, val}; + return af9015_ctrl_msg(d, &req); +} + +static int af9015_write_reg_i2c(struct dvb_usb_device *d, u8 addr, u16 reg, + u8 val) +{ + struct req_t req = {WRITE_I2C, addr, reg, 1, 1, 1, &val}; + + if (addr == af9015_af9013_config[0].demod_address || + addr == af9015_af9013_config[1].demod_address) + req.addr_len = 3; + + return af9015_ctrl_msg(d, &req); +} + +static int af9015_read_reg_i2c(struct dvb_usb_device *d, u8 addr, u16 reg, + u8 *val) +{ + struct req_t req = {READ_I2C, addr, reg, 0, 1, 1, val}; + + if (addr == af9015_af9013_config[0].demod_address || + addr == af9015_af9013_config[1].demod_address) + req.addr_len = 3; + + return af9015_ctrl_msg(d, &req); +} + +static int af9015_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msg[], + int num) +{ + struct dvb_usb_device *d = i2c_get_adapdata(adap); + int ret = 0, i = 0; + u16 addr; + u8 mbox, addr_len; + struct req_t req; + +/* TODO: implement bus lock + +The bus lock is needed because there is two tuners both using same I2C-address. +Due to that the only way to select correct tuner is use demodulator I2C-gate. + +................................................ +. AF9015 includes integrated AF9013 demodulator. +. ____________ ____________ . ____________ +.| uC | | demod | . | tuner | +.|------------| |------------| . |------------| +.| AF9015 | | AF9013/5 | . | MXL5003 | +.| |--+----I2C-------|-----/ -----|-.-----I2C-------| | +.| | | | addr 0x38 | . | addr 0xc6 | +.|____________| | |____________| . |____________| +.................|.............................. + | ____________ ____________ + | | demod | | tuner | + | |------------| |------------| + | | AF9013 | | MXL5003 | + +----I2C-------|-----/ -----|-------I2C-------| | + | addr 0x3a | | addr 0xc6 | + |____________| |____________| +*/ + if (mutex_lock_interruptible(&d->i2c_mutex) < 0) + return -EAGAIN; + + while (i < num) { + if (msg[i].addr == af9015_af9013_config[0].demod_address || + msg[i].addr == af9015_af9013_config[1].demod_address) { + addr = msg[i].buf[0] << 8; + addr += msg[i].buf[1]; + mbox = msg[i].buf[2]; + addr_len = 3; + } else { + addr = msg[i].buf[0]; + addr_len = 1; + mbox = 0; + } + + if (num > i + 1 && (msg[i+1].flags & I2C_M_RD)) { + if (msg[i].addr == + af9015_af9013_config[0].demod_address) + req.cmd = READ_MEMORY; + else + req.cmd = READ_I2C; + req.i2c_addr = msg[i].addr; + req.addr = addr; + req.mbox = mbox; + req.addr_len = addr_len; + req.data_len = msg[i+1].len; + req.data = &msg[i+1].buf[0]; + ret = af9015_ctrl_msg(d, &req); + i += 2; + } else { + if (msg[i].addr == + af9015_af9013_config[0].demod_address) + req.cmd = WRITE_MEMORY; + else + req.cmd = WRITE_I2C; + req.i2c_addr = msg[i].addr; + req.addr = addr; + req.mbox = mbox; + req.addr_len = addr_len; + req.data_len = msg[i].len-addr_len; + req.data = &msg[i].buf[addr_len]; + ret = af9015_ctrl_msg(d, &req); + i += 1; + } + if (ret) + goto error; + + } + ret = i; + +error: + mutex_unlock(&d->i2c_mutex); + + return ret; +} + +static u32 af9015_i2c_func(struct i2c_adapter *adapter) +{ + return I2C_FUNC_I2C; +} + +static struct i2c_algorithm af9015_i2c_algo = { + .master_xfer = af9015_i2c_xfer, + .functionality = af9015_i2c_func, +}; + +static int af9015_do_reg_bit(struct dvb_usb_device *d, u16 addr, u8 bit, u8 op) +{ + int ret; + u8 val, mask = 0x01; + + ret = af9015_read_reg(d, addr, &val); + if (ret) + return ret; + + mask <<= bit; + if (op) { + /* set bit */ + val |= mask; + } else { + /* clear bit */ + mask ^= 0xff; + val &= mask; + } + + return af9015_write_reg(d, addr, val); +} + +static int af9015_set_reg_bit(struct dvb_usb_device *d, u16 addr, u8 bit) +{ + return af9015_do_reg_bit(d, addr, bit, 1); +} + +static int af9015_clear_reg_bit(struct dvb_usb_device *d, u16 addr, u8 bit) +{ + return af9015_do_reg_bit(d, addr, bit, 0); +} + +static int af9015_init_endpoint(struct dvb_usb_device *d) +{ + int ret; + u16 frame_size; + u8 packet_size; + deb_info("%s: USB speed:%d\n", __func__, d->udev->speed); + +#define TS_PACKET_SIZE 188 + +#define TS_USB20_PACKET_COUNT 348 +#define TS_USB20_FRAME_SIZE (TS_PACKET_SIZE*TS_USB20_PACKET_COUNT) + +#define TS_USB11_PACKET_COUNT 21 +#define TS_USB11_FRAME_SIZE (TS_PACKET_SIZE*TS_USB11_PACKET_COUNT) + +#define TS_USB20_MAX_PACKET_SIZE 512 +#define TS_USB11_MAX_PACKET_SIZE 64 + + if (d->udev->speed == USB_SPEED_FULL) { + frame_size = TS_USB11_FRAME_SIZE/4; + packet_size = TS_USB11_MAX_PACKET_SIZE/4; + } else { + frame_size = TS_USB20_FRAME_SIZE/4; + packet_size = TS_USB20_MAX_PACKET_SIZE/4; + } + + ret = af9015_set_reg_bit(d, 0xd507, 2); /* assert EP4 reset */ + if (ret) + goto error; + ret = af9015_set_reg_bit(d, 0xd50b, 1); /* assert EP5 reset */ + if (ret) + goto error; + ret = af9015_clear_reg_bit(d, 0xdd11, 5); /* disable EP4 */ + if (ret) + goto error; + ret = af9015_clear_reg_bit(d, 0xdd11, 6); /* disable EP5 */ + if (ret) + goto error; + ret = af9015_set_reg_bit(d, 0xdd11, 5); /* enable EP4 */ + if (ret) + goto error; + if (af9015_config.dual_mode) { + ret = af9015_set_reg_bit(d, 0xdd11, 6); /* enable EP5 */ + if (ret) + goto error; + } + ret = af9015_clear_reg_bit(d, 0xdd13, 5); /* disable EP4 NAK */ + if (ret) + goto error; + if (af9015_config.dual_mode) { + ret = af9015_clear_reg_bit(d, 0xdd13, 6); /* disable EP5 NAK */ + if (ret) + goto error; + } + /* EP4 xfer length */ + ret = af9015_write_reg(d, 0xdd88, frame_size & 0xff); + if (ret) + goto error; + ret = af9015_write_reg(d, 0xdd89, frame_size >> 8); + if (ret) + goto error; + /* EP5 xfer length */ + ret = af9015_write_reg(d, 0xdd8a, frame_size & 0xff); + if (ret) + goto error; + ret = af9015_write_reg(d, 0xdd8b, frame_size >> 8); + if (ret) + goto error; + ret = af9015_write_reg(d, 0xdd0c, packet_size); /* EP4 packet size */ + if (ret) + goto error; + ret = af9015_write_reg(d, 0xdd0d, packet_size); /* EP5 packet size */ + if (ret) + goto error; + ret = af9015_clear_reg_bit(d, 0xd507, 2); /* negate EP4 reset */ + if (ret) + goto error; + if (af9015_config.dual_mode) { + ret = af9015_clear_reg_bit(d, 0xd50b, 1); /* negate EP5 reset */ + if (ret) + goto error; + } + + /* enable / disable mp2if2 */ + if (af9015_config.dual_mode) + ret = af9015_set_reg_bit(d, 0xd50b, 0); + else + ret = af9015_clear_reg_bit(d, 0xd50b, 0); +error: + if (ret) + err("endpoint init failed:%d", ret); + return ret; +} + +static int af9015_copy_firmware(struct dvb_usb_device *d) +{ + int ret; + u8 fw_params[4]; + u8 val, i; + struct req_t req = {COPY_FIRMWARE, 0, 0x5100, 0, 0, sizeof(fw_params), + fw_params }; + deb_info("%s:\n", __func__); + + fw_params[0] = af9015_config.firmware_size >> 8; + fw_params[1] = af9015_config.firmware_size & 0xff; + fw_params[2] = af9015_config.firmware_checksum >> 8; + fw_params[3] = af9015_config.firmware_checksum & 0xff; + + /* wait 2nd demodulator ready */ + msleep(100); + + ret = af9015_read_reg_i2c(d, 0x3a, 0x98be, &val); + if (ret) + goto error; + else + deb_info("%s: firmware status:%02x\n", __func__, val); + + if (val == 0x0c) /* fw is running, no need for download */ + goto exit; + + /* set I2C master clock to fast (to speed up firmware copy) */ + ret = af9015_write_reg(d, 0xd416, 0x04); /* 0x04 * 400ns */ + if (ret) + goto error; + + msleep(50); + + /* copy firmware */ + ret = af9015_ctrl_msg(d, &req); + if (ret) + err("firmware copy cmd failed:%d", ret); + deb_info("%s: firmware copy done\n", __func__); + + /* set I2C master clock back to normal */ + ret = af9015_write_reg(d, 0xd416, 0x14); /* 0x14 * 400ns */ + if (ret) + goto error; + + /* request boot firmware */ + ret = af9015_write_reg_i2c(d, af9015_af9013_config[1].demod_address, + 0xe205, 1); + deb_info("%s: firmware boot cmd status:%d\n", __func__, ret); + if (ret) + goto error; + + for (i = 0; i < 15; i++) { + msleep(100); + + /* check firmware status */ + ret = af9015_read_reg_i2c(d, + af9015_af9013_config[1].demod_address, 0x98be, &val); + deb_info("%s: firmware status cmd status:%d fw status:%02x\n", + __func__, ret, val); + if (ret) + goto error; + + if (val == 0x0c || val == 0x04) /* success or fail */ + break; + } + + if (val == 0x04) { + err("firmware did not run"); + ret = -1; + } else if (val != 0x0c) { + err("firmware boot timeout"); + ret = -1; + } + +error: +exit: + return ret; +} + +/* dump eeprom */ +static int af9015_eeprom_dump(struct dvb_usb_device *d) +{ + char buf[52], buf2[4]; + u8 reg, val; + + for (reg = 0; ; reg++) { + if (reg % 16 == 0) { + if (reg) + deb_info("%s\n", buf); + sprintf(buf, "%02x: ", reg); + } + if (af9015_read_reg_i2c(d, AF9015_I2C_EEPROM, reg, &val) == 0) + sprintf(buf2, "%02x ", val); + else + strcpy(buf2, "-- "); + strcat(buf, buf2); + if (reg == 0xff) + break; + } + deb_info("%s\n", buf); + return 0; +} + +int af9015_download_ir_table(struct dvb_usb_device *d) +{ + int i, packets = 0, ret; + u16 addr = 0x9a56; /* ir-table start address */ + struct req_t req = {WRITE_MEMORY, 0, 0, 0, 0, 1, NULL}; + u8 *data = NULL; + deb_info("%s:\n", __func__); + + data = af9015_config.ir_table; + packets = af9015_config.ir_table_size; + + /* no remote */ + if (!packets) + goto exit; + + /* load remote ir-table */ + for (i = 0; i < packets; i++) { + req.addr = addr + i; + req.data = &data[i]; + ret = af9015_ctrl_msg(d, &req); + if (ret) { + err("ir-table download failed at packet %d with " \ + "code %d", i, ret); + return ret; + } + } + +exit: + return 0; +} + +static int af9015_init(struct dvb_usb_device *d) +{ + int ret; + deb_info("%s:\n", __func__); + + ret = af9015_init_endpoint(d); + if (ret) + goto error; + + ret = af9015_download_ir_table(d); + if (ret) + goto error; + +error: + return ret; +} + +static int af9015_pid_filter_ctrl(struct dvb_usb_adapter *adap, int onoff) +{ + int ret; + deb_info("%s: onoff:%d\n", __func__, onoff); + + if (onoff) + ret = af9015_set_reg_bit(adap->dev, 0xd503, 0); + else + ret = af9015_clear_reg_bit(adap->dev, 0xd503, 0); + + return ret; +} + +static int af9015_pid_filter(struct dvb_usb_adapter *adap, int index, u16 pid, + int onoff) +{ + int ret; + u8 idx; + + deb_info("%s: set pid filter, index %d, pid %x, onoff %d\n", + __func__, index, pid, onoff); + + ret = af9015_write_reg(adap->dev, 0xd505, (pid & 0xff)); + if (ret) + goto error; + + ret = af9015_write_reg(adap->dev, 0xd506, (pid >> 8)); + if (ret) + goto error; + + idx = ((index & 0x1f) | (1 << 5)); + ret = af9015_write_reg(adap->dev, 0xd504, idx); + +error: + return ret; +} + +static int af9015_download_firmware(struct usb_device *udev, + const struct firmware *fw) +{ + int i, len, packets, remainder, ret; + struct req_t req = {DOWNLOAD_FIRMWARE, 0, 0, 0, 0, 0, NULL}; + u16 addr = 0x5100; /* firmware start address */ + u16 checksum = 0; + + deb_info("%s:\n", __func__); + + /* calc checksum */ + for (i = 0; i < fw->size; i++) + checksum += fw->data[i]; + + af9015_config.firmware_size = fw->size; + af9015_config.firmware_checksum = checksum; + + #define FW_PACKET_MAX_DATA 55 + + packets = fw->size / FW_PACKET_MAX_DATA; + remainder = fw->size % FW_PACKET_MAX_DATA; + len = FW_PACKET_MAX_DATA; + for (i = 0; i <= packets; i++) { + if (i == packets) /* set size of the last packet */ + len = remainder; + + req.data_len = len; + req.data = (fw->data + i * FW_PACKET_MAX_DATA); + req.addr = addr; + addr += FW_PACKET_MAX_DATA; + + ret = af9015_rw_udev(udev, &req); + if (ret) { + err("firmware download failed at packet %d with " \ + "code %d", i, ret); + goto error; + } + } + #undef FW_PACKET_MAX_DATA + + /* firmware loaded, request boot */ + req.cmd = BOOT; + ret = af9015_rw_udev(udev, &req); + if (ret) { + err("firmware boot failed:%d", ret); + goto error; + } + + /* firmware is running, reconnect device in the usb bus */ + req.cmd = RECONNECT_USB; + ret = af9015_rw_udev(udev, &req); + if (ret) + err("reconnect failed: %d", ret); + +error: + return ret; +} + +static int af9015_read_config(struct usb_device *udev) +{ + int ret; + u8 val, i, offset = 0; + struct req_t req = {READ_I2C, AF9015_I2C_EEPROM, 0, 0, 1, 1, &val}; + char manufacturer[10]; + + /* IR remote controller */ + req.addr = AF9015_EEPROM_IR_MODE; + ret = af9015_rw_udev(udev, &req); + if (ret) + goto error; + deb_info("%s: IR mode:%d\n", __func__, val); + for (i = 0; i < af9015_properties_count; i++) { + if (val == AF9015_IR_MODE_DISABLED || val == 0x04) { + af9015_properties[i].rc_key_map = NULL; + af9015_properties[i].rc_key_map_size = 0; + } else if (dvb_usb_af9015_remote) { + /* load remote defined as module param */ + switch (dvb_usb_af9015_remote) { + case AF9015_REMOTE_A_LINK_DTU_M: + af9015_properties[i].rc_key_map = + af9015_rc_keys_a_link; + af9015_properties[i].rc_key_map_size = + ARRAY_SIZE(af9015_rc_keys_a_link); + af9015_config.ir_table = af9015_ir_table_a_link; + af9015_config.ir_table_size = + ARRAY_SIZE(af9015_ir_table_a_link); + break; + case AF9015_REMOTE_MSI_DIGIVOX_MINI_II_V3: + af9015_properties[i].rc_key_map = + af9015_rc_keys_msi; + af9015_properties[i].rc_key_map_size = + ARRAY_SIZE(af9015_rc_keys_msi); + af9015_config.ir_table = af9015_ir_table_msi; + af9015_config.ir_table_size = + ARRAY_SIZE(af9015_ir_table_msi); + break; + case AF9015_REMOTE_MYGICTV_U718: + af9015_properties[i].rc_key_map = + af9015_rc_keys_mygictv; + af9015_properties[i].rc_key_map_size = + ARRAY_SIZE(af9015_rc_keys_mygictv); + af9015_config.ir_table = + af9015_ir_table_mygictv; + af9015_config.ir_table_size = + ARRAY_SIZE(af9015_ir_table_mygictv); + break; + } + } else { + switch (udev->descriptor.idVendor) { + case cpu_to_le16(USB_VID_LEADTEK): + af9015_properties[i].rc_key_map = + af9015_rc_keys_leadtek; + af9015_properties[i].rc_key_map_size = + ARRAY_SIZE(af9015_rc_keys_leadtek); + af9015_config.ir_table = + af9015_ir_table_leadtek; + af9015_config.ir_table_size = + ARRAY_SIZE(af9015_ir_table_leadtek); + break; + case cpu_to_le16(USB_VID_VISIONPLUS): + if (udev->descriptor.idProduct == + cpu_to_le16(USB_PID_AZUREWAVE_AD_TU700)) { + af9015_properties[i].rc_key_map = + af9015_rc_keys_twinhan; + af9015_properties[i].rc_key_map_size = + ARRAY_SIZE(af9015_rc_keys_twinhan); + af9015_config.ir_table = + af9015_ir_table_twinhan; + af9015_config.ir_table_size = + ARRAY_SIZE(af9015_ir_table_twinhan); + } + break; + case cpu_to_le16(USB_VID_KWORLD_2): + /* TODO: use correct rc keys */ + af9015_properties[i].rc_key_map = + af9015_rc_keys_twinhan; + af9015_properties[i].rc_key_map_size = + ARRAY_SIZE(af9015_rc_keys_twinhan); + af9015_config.ir_table = af9015_ir_table_kworld; + af9015_config.ir_table_size = + ARRAY_SIZE(af9015_ir_table_kworld); + break; + /* Check USB manufacturer and product strings and try + to determine correct remote in case of chip vendor + reference IDs are used. */ + case cpu_to_le16(USB_VID_AFATECH): + memset(manufacturer, 0, sizeof(manufacturer)); + usb_string(udev, udev->descriptor.iManufacturer, + manufacturer, sizeof(manufacturer)); + if (!strcmp("Geniatech", manufacturer)) { + /* iManufacturer 1 Geniatech + iProduct 2 AF9015 */ + af9015_properties[i].rc_key_map = + af9015_rc_keys_mygictv; + af9015_properties[i].rc_key_map_size = + ARRAY_SIZE(af9015_rc_keys_mygictv); + af9015_config.ir_table = + af9015_ir_table_mygictv; + af9015_config.ir_table_size = + ARRAY_SIZE(af9015_ir_table_mygictv); + } else if (!strcmp("MSI", manufacturer)) { + /* iManufacturer 1 MSI + iProduct 2 MSI K-VOX */ + af9015_properties[i].rc_key_map = + af9015_rc_keys_msi; + af9015_properties[i].rc_key_map_size = + ARRAY_SIZE(af9015_rc_keys_msi); + af9015_config.ir_table = + af9015_ir_table_msi; + af9015_config.ir_table_size = + ARRAY_SIZE(af9015_ir_table_msi); + } + break; + } + } + } + + /* TS mode - one or two receivers */ + req.addr = AF9015_EEPROM_TS_MODE; + ret = af9015_rw_udev(udev, &req); + if (ret) + goto error; + af9015_config.dual_mode = val; + deb_info("%s: TS mode:%d\n", __func__, af9015_config.dual_mode); + /* disable dual mode by default because it is buggy */ + if (!dvb_usb_af9015_dual_mode) + af9015_config.dual_mode = 0; + + /* set buffer size according to USB port speed */ + for (i = 0; i < af9015_properties_count; i++) { + /* USB1.1 set smaller buffersize and disable 2nd adapter */ + if (udev->speed == USB_SPEED_FULL) { + af9015_properties[i].adapter->stream.u.bulk.buffersize = + TS_USB11_MAX_PACKET_SIZE; + /* disable 2nd adapter because we don't have + PID-filters */ + af9015_config.dual_mode = 0; + } else { + af9015_properties[i].adapter->stream.u.bulk.buffersize = + TS_USB20_MAX_PACKET_SIZE; + } + } + + if (af9015_config.dual_mode) { + /* read 2nd demodulator I2C address */ + req.addr = AF9015_EEPROM_DEMOD2_I2C; + ret = af9015_rw_udev(udev, &req); + if (ret) + goto error; + af9015_af9013_config[1].demod_address = val; + + /* enable 2nd adapter */ + for (i = 0; i < af9015_properties_count; i++) + af9015_properties[i].num_adapters = 2; + + } else { + /* disable 2nd adapter */ + for (i = 0; i < af9015_properties_count; i++) + af9015_properties[i].num_adapters = 1; + } + + for (i = 0; i < af9015_properties[0].num_adapters; i++) { + if (i == 1) + offset = AF9015_EEPROM_OFFSET; + /* xtal */ + req.addr = AF9015_EEPROM_XTAL_TYPE1 + offset; + ret = af9015_rw_udev(udev, &req); + if (ret) + goto error; + switch (val) { + case 0: + af9015_af9013_config[i].adc_clock = 28800; + break; + case 1: + af9015_af9013_config[i].adc_clock = 20480; + break; + case 2: + af9015_af9013_config[i].adc_clock = 28000; + break; + case 3: + af9015_af9013_config[i].adc_clock = 25000; + break; + }; + deb_info("%s: [%d] xtal:%d set adc_clock:%d\n", __func__, i, + val, af9015_af9013_config[i].adc_clock); + + /* tuner IF */ + req.addr = AF9015_EEPROM_IF1H + offset; + ret = af9015_rw_udev(udev, &req); + if (ret) + goto error; + af9015_af9013_config[i].tuner_if = val << 8; + req.addr = AF9015_EEPROM_IF1L + offset; + ret = af9015_rw_udev(udev, &req); + if (ret) + goto error; + af9015_af9013_config[i].tuner_if += val; + deb_info("%s: [%d] IF1:%d\n", __func__, i, + af9015_af9013_config[0].tuner_if); + + /* MT2060 IF1 */ + req.addr = AF9015_EEPROM_MT2060_IF1H + offset; + ret = af9015_rw_udev(udev, &req); + if (ret) + goto error; + af9015_config.mt2060_if1[i] = val << 8; + req.addr = AF9015_EEPROM_MT2060_IF1L + offset; + ret = af9015_rw_udev(udev, &req); + if (ret) + goto error; + af9015_config.mt2060_if1[i] += val; + deb_info("%s: [%d] MT2060 IF1:%d\n", __func__, i, + af9015_config.mt2060_if1[i]); + + /* tuner */ + req.addr = AF9015_EEPROM_TUNER_ID1 + offset; + ret = af9015_rw_udev(udev, &req); + if (ret) + goto error; + switch (val) { + case AF9013_TUNER_ENV77H11D5: + case AF9013_TUNER_MT2060: + case AF9013_TUNER_MC44S803: + case AF9013_TUNER_QT1010: + case AF9013_TUNER_UNKNOWN: + case AF9013_TUNER_MT2060_2: + case AF9013_TUNER_TDA18271: + case AF9013_TUNER_QT1010A: + af9015_af9013_config[i].rf_spec_inv = 1; + break; + case AF9013_TUNER_MXL5003D: + case AF9013_TUNER_MXL5005D: + case AF9013_TUNER_MXL5005R: + af9015_af9013_config[i].rf_spec_inv = 0; + break; + default: + warn("tuner id:%d not supported, please report!", val); + return -ENODEV; + }; + + af9015_af9013_config[i].tuner = val; + deb_info("%s: [%d] tuner id:%d\n", __func__, i, val); + } + +error: + if (ret) + err("eeprom read failed:%d", ret); + + return ret; +} + +static int af9015_identify_state(struct usb_device *udev, + struct dvb_usb_device_properties *props, + struct dvb_usb_device_description **desc, + int *cold) +{ + int ret; + u8 reply; + struct req_t req = {GET_CONFIG, 0, 0, 0, 0, 1, &reply}; + + ret = af9015_rw_udev(udev, &req); + if (ret) + return ret; + + deb_info("%s: reply:%02x\n", __func__, reply); + if (reply == 0x02) + *cold = 0; + else + *cold = 1; + + return ret; +} + +static int af9015_rc_query(struct dvb_usb_device *d, u32 *event, int *state) +{ + u8 buf[8]; + struct req_t req = {GET_IR_CODE, 0, 0, 0, 0, sizeof(buf), buf}; + struct dvb_usb_rc_key *keymap = d->props.rc_key_map; + int i, ret; + + memset(buf, 0, sizeof(buf)); + + ret = af9015_ctrl_msg(d, &req); + if (ret) + return ret; + + *event = 0; + *state = REMOTE_NO_KEY_PRESSED; + + for (i = 0; i < d->props.rc_key_map_size; i++) { + if (!buf[1] && keymap[i].custom == buf[0] && + keymap[i].data == buf[2]) { + *event = keymap[i].event; + *state = REMOTE_KEY_PRESSED; + break; + } + } + if (!buf[1]) + deb_rc("%s: %02x %02x %02x %02x %02x %02x %02x %02x\n", + __func__, buf[0], buf[1], buf[2], buf[3], buf[4], + buf[5], buf[6], buf[7]); + + return 0; +} + +/* init 2nd I2C adapter */ +int af9015_i2c_init(struct dvb_usb_device *d) +{ + int ret; + struct af9015_state *state = d->priv; + deb_info("%s:\n", __func__); + + strncpy(state->i2c_adap.name, d->desc->name, + sizeof(state->i2c_adap.name)); +#ifdef I2C_ADAP_CLASS_TV_DIGITAL + state->i2c_adap.class = I2C_ADAP_CLASS_TV_DIGITAL, +#else + state->i2c_adap.class = I2C_CLASS_TV_DIGITAL, +#endif + state->i2c_adap.algo = d->props.i2c_algo; + state->i2c_adap.algo_data = NULL; + state->i2c_adap.dev.parent = &d->udev->dev; + + i2c_set_adapdata(&state->i2c_adap, d); + + ret = i2c_add_adapter(&state->i2c_adap); + if (ret < 0) + err("could not add i2c adapter"); + + return ret; +} + +static int af9015_af9013_frontend_attach(struct dvb_usb_adapter *adap) +{ + int ret; + struct af9015_state *state = adap->dev->priv; + struct i2c_adapter *i2c_adap; + + if (adap->id == 0) { + /* select I2C adapter */ + i2c_adap = &adap->dev->i2c_adap; + + deb_info("%s: init I2C\n", __func__); + ret = af9015_i2c_init(adap->dev); + + /* dump eeprom (debug) */ + ret = af9015_eeprom_dump(adap->dev); + if (ret) + return ret; + } else { + /* select I2C adapter */ + i2c_adap = &state->i2c_adap; + + /* copy firmware to 2nd demodulator */ + if (af9015_config.dual_mode) { + ret = af9015_copy_firmware(adap->dev); + if (ret) { + err("firmware copy to 2nd frontend " \ + "failed, will disable it"); + af9015_config.dual_mode = 0; + return -ENODEV; + } + } else { + return -ENODEV; + } + } + + /* attach demodulator */ + adap->fe = dvb_attach(af9013_attach, &af9015_af9013_config[adap->id], + i2c_adap); + + return adap->fe == NULL ? -ENODEV : 0; +} + +static struct mt2060_config af9015_mt2060_config = { + .i2c_address = 0xc0, + .clock_out = 0, +}; + +static struct qt1010_config af9015_qt1010_config = { + .i2c_address = 0xc4, +}; + +static struct tda18271_config af9015_tda18271_config = { + .gate = TDA18271_GATE_DIGITAL, + .small_i2c = 1, +}; + +static struct mxl5005s_config af9015_mxl5003_config = { + .i2c_address = 0xc6, + .if_freq = IF_FREQ_4570000HZ, + .xtal_freq = CRYSTAL_FREQ_16000000HZ, + .agc_mode = MXL_SINGLE_AGC, + .tracking_filter = MXL_TF_DEFAULT, + .rssi_enable = MXL_RSSI_DISABLE, + .cap_select = MXL_CAP_SEL_ENABLE, + .div_out = MXL_DIV_OUT_4, + .clock_out = MXL_CLOCK_OUT_DISABLE, + .output_load = MXL5005S_IF_OUTPUT_LOAD_200_OHM, + .top = MXL5005S_TOP_25P2, + .mod_mode = MXL_DIGITAL_MODE, + .if_mode = MXL_ZERO_IF, + .AgcMasterByte = 0x00, +}; + +static struct mxl5005s_config af9015_mxl5005_config = { + .i2c_address = 0xc6, + .if_freq = IF_FREQ_4570000HZ, + .xtal_freq = CRYSTAL_FREQ_16000000HZ, + .agc_mode = MXL_SINGLE_AGC, + .tracking_filter = MXL_TF_OFF, + .rssi_enable = MXL_RSSI_DISABLE, + .cap_select = MXL_CAP_SEL_ENABLE, + .div_out = MXL_DIV_OUT_4, + .clock_out = MXL_CLOCK_OUT_DISABLE, + .output_load = MXL5005S_IF_OUTPUT_LOAD_200_OHM, + .top = MXL5005S_TOP_25P2, + .mod_mode = MXL_DIGITAL_MODE, + .if_mode = MXL_ZERO_IF, + .AgcMasterByte = 0x00, +}; + +static int af9015_tuner_attach(struct dvb_usb_adapter *adap) +{ + struct af9015_state *state = adap->dev->priv; + struct i2c_adapter *i2c_adap; + int ret; + deb_info("%s: \n", __func__); + + /* select I2C adapter */ + if (adap->id == 0) + i2c_adap = &adap->dev->i2c_adap; + else + i2c_adap = &state->i2c_adap; + + switch (af9015_af9013_config[adap->id].tuner) { + case AF9013_TUNER_MT2060: + case AF9013_TUNER_MT2060_2: + ret = dvb_attach(mt2060_attach, adap->fe, i2c_adap, + &af9015_mt2060_config, + af9015_config.mt2060_if1[adap->id]) + == NULL ? -ENODEV : 0; + break; + case AF9013_TUNER_QT1010: + case AF9013_TUNER_QT1010A: + ret = dvb_attach(qt1010_attach, adap->fe, i2c_adap, + &af9015_qt1010_config) == NULL ? -ENODEV : 0; + break; + case AF9013_TUNER_TDA18271: + ret = dvb_attach(tda18271_attach, adap->fe, 0xc0, i2c_adap, + &af9015_tda18271_config) == NULL ? -ENODEV : 0; + break; + case AF9013_TUNER_MXL5003D: + ret = dvb_attach(mxl5005s_attach, adap->fe, i2c_adap, + &af9015_mxl5003_config) == NULL ? -ENODEV : 0; + break; + case AF9013_TUNER_MXL5005D: + case AF9013_TUNER_MXL5005R: + ret = dvb_attach(mxl5005s_attach, adap->fe, i2c_adap, + &af9015_mxl5005_config) == NULL ? -ENODEV : 0; + break; + case AF9013_TUNER_ENV77H11D5: + ret = dvb_attach(dvb_pll_attach, adap->fe, 0xc0, i2c_adap, + DVB_PLL_TDA665X) == NULL ? -ENODEV : 0; + break; + case AF9013_TUNER_MC44S803: +#if 0 + ret = dvb_attach(mc44s80x_attach, adap->fe, i2c_adap) + == NULL ? -ENODEV : 0; +#else + ret = -ENODEV; + info("Freescale MC44S803 tuner found but no driver for that" \ + "tuner. Look at the Linuxtv.org for tuner driver" \ + "status."); +#endif + break; + case AF9013_TUNER_UNKNOWN: + default: + ret = -ENODEV; + err("Unknown tuner id:%d", + af9015_af9013_config[adap->id].tuner); + } + return ret; +} + +static struct usb_device_id af9015_usb_table[] = { +/* 0 */{USB_DEVICE(USB_VID_AFATECH, USB_PID_AFATECH_AF9015_9015)}, + {USB_DEVICE(USB_VID_AFATECH, USB_PID_AFATECH_AF9015_9016)}, + {USB_DEVICE(USB_VID_LEADTEK, USB_PID_WINFAST_DTV_DONGLE_GOLD)}, + {USB_DEVICE(USB_VID_PINNACLE, USB_PID_PINNACLE_PCTV71E)}, + {USB_DEVICE(USB_VID_KWORLD_2, USB_PID_KWORLD_399U)}, +/* 5 */{USB_DEVICE(USB_VID_VISIONPLUS, + USB_PID_TINYTWIN)}, + {USB_DEVICE(USB_VID_VISIONPLUS, + USB_PID_AZUREWAVE_AD_TU700)}, + {USB_DEVICE(USB_VID_TERRATEC, USB_PID_TERRATEC_CINERGY_T_USB_XE_REV2)}, + {USB_DEVICE(USB_VID_KWORLD_2, USB_PID_KWORLD_PC160_2T)}, + {USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_VOLAR_X)}, +/* 10 */{USB_DEVICE(USB_VID_XTENSIONS, USB_PID_XTENSIONS_XD_380)}, + {USB_DEVICE(USB_VID_MSI_2, USB_PID_MSI_DIGIVOX_DUO)}, + {USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_VOLAR_X_2)}, + {0}, +}; +MODULE_DEVICE_TABLE(usb, af9015_usb_table); + +static struct dvb_usb_device_properties af9015_properties[] = { + { + .caps = DVB_USB_IS_AN_I2C_ADAPTER, + + .usb_ctrl = DEVICE_SPECIFIC, + .download_firmware = af9015_download_firmware, + .firmware = "dvb-usb-af9015.fw", + + .size_of_priv = sizeof(struct af9015_state), \ + + .num_adapters = 2, + .adapter = { + { + .caps = DVB_USB_ADAP_HAS_PID_FILTER | + DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF, + + .pid_filter_count = 32, + .pid_filter = af9015_pid_filter, + .pid_filter_ctrl = af9015_pid_filter_ctrl, + + .frontend_attach = + af9015_af9013_frontend_attach, + .tuner_attach = af9015_tuner_attach, + .stream = { + .type = USB_BULK, + .count = 6, + .endpoint = 0x84, + }, + }, + { + .frontend_attach = + af9015_af9013_frontend_attach, + .tuner_attach = af9015_tuner_attach, + .stream = { + .type = USB_BULK, + .count = 6, + .endpoint = 0x85, + }, + } + }, + + .identify_state = af9015_identify_state, + + .rc_query = af9015_rc_query, + .rc_interval = 150, + + .i2c_algo = &af9015_i2c_algo, + + .num_device_descs = 9, + .devices = { + { + .name = "Afatech AF9015 DVB-T USB2.0 stick", + .cold_ids = {&af9015_usb_table[0], + &af9015_usb_table[1], NULL}, + .warm_ids = {NULL}, + }, + { + .name = "Leadtek WinFast DTV Dongle Gold", + .cold_ids = {&af9015_usb_table[2], NULL}, + .warm_ids = {NULL}, + }, + { + .name = "Pinnacle PCTV 71e", + .cold_ids = {&af9015_usb_table[3], NULL}, + .warm_ids = {NULL}, + }, + { + .name = "KWorld PlusTV Dual DVB-T Stick " \ + "(DVB-T 399U)", + .cold_ids = {&af9015_usb_table[4], NULL}, + .warm_ids = {NULL}, + }, + { + .name = "DigitalNow TinyTwin DVB-T Receiver", + .cold_ids = {&af9015_usb_table[5], NULL}, + .warm_ids = {NULL}, + }, + { + .name = "TwinHan AzureWave AD-TU700(704J)", + .cold_ids = {&af9015_usb_table[6], NULL}, + .warm_ids = {NULL}, + }, + { + .name = "TerraTec Cinergy T USB XE", + .cold_ids = {&af9015_usb_table[7], NULL}, + .warm_ids = {NULL}, + }, + { + .name = "KWorld PlusTV Dual DVB-T PCI " \ + "(DVB-T PC160-2T)", + .cold_ids = {&af9015_usb_table[8], NULL}, + .warm_ids = {NULL}, + }, + { + .name = "AVerMedia AVerTV DVB-T Volar X", + .cold_ids = {&af9015_usb_table[9], NULL}, + .warm_ids = {NULL}, + }, + } + }, { + .caps = DVB_USB_IS_AN_I2C_ADAPTER, + + .usb_ctrl = DEVICE_SPECIFIC, + .download_firmware = af9015_download_firmware, + .firmware = "dvb-usb-af9015.fw", + + .size_of_priv = sizeof(struct af9015_state), \ + + .num_adapters = 2, + .adapter = { + { + .caps = DVB_USB_ADAP_HAS_PID_FILTER | + DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF, + + .pid_filter_count = 32, + .pid_filter = af9015_pid_filter, + .pid_filter_ctrl = af9015_pid_filter_ctrl, + + .frontend_attach = + af9015_af9013_frontend_attach, + .tuner_attach = af9015_tuner_attach, + .stream = { + .type = USB_BULK, + .count = 6, + .endpoint = 0x84, + }, + }, + { + .frontend_attach = + af9015_af9013_frontend_attach, + .tuner_attach = af9015_tuner_attach, + .stream = { + .type = USB_BULK, + .count = 6, + .endpoint = 0x85, + }, + } + }, + + .identify_state = af9015_identify_state, + + .rc_query = af9015_rc_query, + .rc_interval = 150, + + .i2c_algo = &af9015_i2c_algo, + + .num_device_descs = 3, + .devices = { + { + .name = "Xtensions XD-380", + .cold_ids = {&af9015_usb_table[10], NULL}, + .warm_ids = {NULL}, + }, + { + .name = "MSI DIGIVOX Duo", + .cold_ids = {&af9015_usb_table[11], NULL}, + .warm_ids = {NULL}, + }, + { + .name = "Fujitsu-Siemens Slim Mobile USB DVB-T", + .cold_ids = {&af9015_usb_table[12], NULL}, + .warm_ids = {NULL}, + }, + } + } +}; +#undef AF9015_DEFAULT_PROPERTIES + +static int af9015_usb_probe(struct usb_interface *intf, + const struct usb_device_id *id) +{ + int ret = 0; + struct dvb_usb_device *d = NULL; + struct usb_device *udev = interface_to_usbdev(intf); + u8 i; + + deb_info("%s: interface:%d\n", __func__, + intf->cur_altsetting->desc.bInterfaceNumber); + + /* interface 0 is used by DVB-T receiver and + interface 1 is for remote controller (HID) */ + if (intf->cur_altsetting->desc.bInterfaceNumber == 0) { + ret = af9015_read_config(udev); + if (ret) + return ret; + + for (i = 0; i < af9015_properties_count; i++) { + ret = dvb_usb_device_init(intf, &af9015_properties[i], + THIS_MODULE, &d, adapter_nr); + if (!ret) + break; + if (ret != -ENODEV) + return ret; + } + if (ret) + return ret; + + if (d) + ret = af9015_init(d); + } + + return ret; +} + +void af9015_i2c_exit(struct dvb_usb_device *d) +{ + struct af9015_state *state = d->priv; + deb_info("%s: \n", __func__); + + /* remove 2nd I2C adapter */ + if (d->state & DVB_USB_STATE_I2C) + i2c_del_adapter(&state->i2c_adap); +} + +static void af9015_usb_device_exit(struct usb_interface *intf) +{ + struct dvb_usb_device *d = usb_get_intfdata(intf); + deb_info("%s: \n", __func__); + + /* remove 2nd I2C adapter */ + if (d != NULL && d->desc != NULL) + af9015_i2c_exit(d); + + dvb_usb_device_exit(intf); +} + +/* usb specific object needed to register this driver with the usb subsystem */ +static struct usb_driver af9015_usb_driver = { + .name = "dvb_usb_af9015", + .probe = af9015_usb_probe, + .disconnect = af9015_usb_device_exit, + .id_table = af9015_usb_table, +}; + +/* module stuff */ +static int __init af9015_usb_module_init(void) +{ + int ret; + ret = usb_register(&af9015_usb_driver); + if (ret) + err("module init failed:%d", ret); + + return ret; +} + +static void __exit af9015_usb_module_exit(void) +{ + /* deregister this driver from the USB subsystem */ + usb_deregister(&af9015_usb_driver); +} + +module_init(af9015_usb_module_init); +module_exit(af9015_usb_module_exit); + +MODULE_AUTHOR("Antti Palosaari "); +MODULE_DESCRIPTION("Driver for Afatech AF9015 DVB-T"); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/dvb/dvb-usb/af9015.h b/drivers/media/dvb/dvb-usb/af9015.h new file mode 100644 index 0000000..882e8a4 --- /dev/null +++ b/drivers/media/dvb/dvb-usb/af9015.h @@ -0,0 +1,524 @@ +/* + * DVB USB Linux driver for Afatech AF9015 DVB-T USB2.0 receiver + * + * Copyright (C) 2007 Antti Palosaari + * + * Thanks to Afatech who kindly provided information. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + */ + +#ifndef _DVB_USB_AF9015_H_ +#define _DVB_USB_AF9015_H_ + +#define DVB_USB_LOG_PREFIX "af9015" +#include "dvb-usb.h" + +extern int dvb_usb_af9015_debug; +#define deb_info(args...) dprintk(dvb_usb_af9015_debug, 0x01, args) +#define deb_rc(args...) dprintk(dvb_usb_af9015_debug, 0x02, args) +#define deb_xfer(args...) dprintk(dvb_usb_af9015_debug, 0x04, args) +#define deb_reg(args...) dprintk(dvb_usb_af9015_debug, 0x08, args) +#define deb_i2c(args...) dprintk(dvb_usb_af9015_debug, 0x10, args) +#define deb_fw(args...) dprintk(dvb_usb_af9015_debug, 0x20, args) + +#define AF9015_I2C_EEPROM 0xa0 +#define AF9015_I2C_DEMOD 0x38 +#define AF9015_USB_TIMEOUT 2000 + +/* EEPROM locations */ +#define AF9015_EEPROM_IR_MODE 0x18 +#define AF9015_EEPROM_IR_REMOTE_TYPE 0x34 +#define AF9015_EEPROM_TS_MODE 0x31 +#define AF9015_EEPROM_DEMOD2_I2C 0x32 + +#define AF9015_EEPROM_SAW_BW1 0x35 +#define AF9015_EEPROM_XTAL_TYPE1 0x36 +#define AF9015_EEPROM_SPEC_INV1 0x37 +#define AF9015_EEPROM_IF1L 0x38 +#define AF9015_EEPROM_IF1H 0x39 +#define AF9015_EEPROM_MT2060_IF1L 0x3a +#define AF9015_EEPROM_MT2060_IF1H 0x3b +#define AF9015_EEPROM_TUNER_ID1 0x3c + +#define AF9015_EEPROM_SAW_BW2 0x45 +#define AF9015_EEPROM_XTAL_TYPE2 0x46 +#define AF9015_EEPROM_SPEC_INV2 0x47 +#define AF9015_EEPROM_IF2L 0x48 +#define AF9015_EEPROM_IF2H 0x49 +#define AF9015_EEPROM_MT2060_IF2L 0x4a +#define AF9015_EEPROM_MT2060_IF2H 0x4b +#define AF9015_EEPROM_TUNER_ID2 0x4c + +#define AF9015_EEPROM_OFFSET (AF9015_EEPROM_SAW_BW2 - AF9015_EEPROM_SAW_BW1) + +#define AF9015_GPIO_ON (1 << 0) +#define AF9015_GPIO_EN (1 << 1) +#define AF9015_GPIO_O (1 << 2) +#define AF9015_GPIO_I (1 << 3) + +#define AF9015_GPIO_TUNER_ON (AF9015_GPIO_ON|AF9015_GPIO_EN) +#define AF9015_GPIO_TUNER_OFF (AF9015_GPIO_ON|AF9015_GPIO_EN|AF9015_GPIO_O) + +struct req_t { + u8 cmd; /* [0] */ + /* seq */ /* [1] */ + u8 i2c_addr; /* [2] */ + u16 addr; /* [3|4] */ + u8 mbox; /* [5] */ + u8 addr_len; /* [6] */ + u8 data_len; /* [7] */ + u8 *data; +}; + +enum af9015_cmd { + GET_CONFIG = 0x10, + DOWNLOAD_FIRMWARE = 0x11, + BOOT = 0x13, + READ_MEMORY = 0x20, + WRITE_MEMORY = 0x21, + READ_WRITE_I2C = 0x22, + COPY_FIRMWARE = 0x23, + RECONNECT_USB = 0x5a, + WRITE_VIRTUAL_MEMORY = 0x26, + GET_IR_CODE = 0x27, + READ_I2C, + WRITE_I2C, +}; + +enum af9015_ir_mode { + AF9015_IR_MODE_DISABLED = 0, + AF9015_IR_MODE_HID, + AF9015_IR_MODE_RLC, + AF9015_IR_MODE_RC6, +}; + +struct af9015_state { + struct i2c_adapter i2c_adap; /* I2C adapter for 2nd FE */ +}; + +struct af9015_config { + u8 dual_mode:1; + u16 mt2060_if1[2]; + u16 firmware_size; + u16 firmware_checksum; + u8 *ir_table; + u16 ir_table_size; +}; + +enum af9015_remote { + AF9015_REMOTE_NONE = 0, + AF9015_REMOTE_A_LINK_DTU_M, + AF9015_REMOTE_MSI_DIGIVOX_MINI_II_V3, + AF9015_REMOTE_MYGICTV_U718, +}; + +/* Leadtek WinFast DTV Dongle Gold */ +static struct dvb_usb_rc_key af9015_rc_keys_leadtek[] = { + { 0x00, 0x1e, KEY_1 }, + { 0x00, 0x1f, KEY_2 }, + { 0x00, 0x20, KEY_3 }, + { 0x00, 0x21, KEY_4 }, + { 0x00, 0x22, KEY_5 }, + { 0x00, 0x23, KEY_6 }, + { 0x00, 0x24, KEY_7 }, + { 0x00, 0x25, KEY_8 }, + { 0x00, 0x26, KEY_9 }, + { 0x00, 0x27, KEY_0 }, + { 0x00, 0x28, KEY_ENTER }, + { 0x00, 0x4f, KEY_VOLUMEUP }, + { 0x00, 0x50, KEY_VOLUMEDOWN }, + { 0x00, 0x51, KEY_CHANNELDOWN }, + { 0x00, 0x52, KEY_CHANNELUP }, +}; + +static u8 af9015_ir_table_leadtek[] = { + 0x03, 0xfc, 0x00, 0xff, 0x1a, 0x01, 0x00, + 0x03, 0xfc, 0x56, 0xa9, 0x00, 0x00, 0x00, + 0x03, 0xfc, 0x4b, 0xb4, 0x00, 0x00, 0x00, + 0x03, 0xfc, 0x4c, 0xb3, 0xb2, 0x04, 0x00, + 0x03, 0xfc, 0x4d, 0xb2, 0x00, 0x00, 0x00, + 0x03, 0xfc, 0x4e, 0xb1, 0x00, 0x00, 0x00, + 0x03, 0xfc, 0x1f, 0xe0, 0x3d, 0x00, 0x00, + 0x03, 0xfc, 0x40, 0xbf, 0x13, 0x01, 0x00, + 0x03, 0xfc, 0x14, 0xeb, 0x10, 0x00, 0x00, + 0x03, 0xfc, 0x49, 0xb6, 0x05, 0x01, 0x00, + 0x03, 0xfc, 0x50, 0xaf, 0x29, 0x00, 0x00, + 0x03, 0xfc, 0x0c, 0xf3, 0x52, 0x00, 0x00, + 0x03, 0xfc, 0x03, 0xfc, 0x09, 0x00, 0x00, + 0x03, 0xfc, 0x08, 0xf7, 0x50, 0x00, 0x00, + 0x03, 0xfc, 0x13, 0xec, 0x28, 0x00, 0x00, + 0x03, 0xfc, 0x04, 0xfb, 0x4f, 0x00, 0x00, + 0x03, 0xfc, 0x4f, 0xb0, 0x0f, 0x01, 0x00, + 0x03, 0xfc, 0x10, 0xef, 0x51, 0x00, 0x00, + 0x03, 0xfc, 0x51, 0xae, 0x3f, 0x00, 0x00, + 0x03, 0xfc, 0x42, 0xbd, 0x13, 0x00, 0x00, + 0x03, 0xfc, 0x43, 0xbc, 0x00, 0x00, 0x00, + 0x03, 0xfc, 0x44, 0xbb, 0x11, 0x00, 0x00, + 0x03, 0xfc, 0x52, 0xad, 0x19, 0x00, 0x00, + 0x03, 0xfc, 0x54, 0xab, 0x05, 0x00, 0x00, + 0x03, 0xfc, 0x46, 0xb9, 0x29, 0x00, 0x00, + 0x03, 0xfc, 0x55, 0xaa, 0x2b, 0x00, 0x00, + 0x03, 0xfc, 0x53, 0xac, 0x41, 0x00, 0x00, + 0x03, 0xfc, 0x05, 0xfa, 0x1e, 0x00, 0x00, + 0x03, 0xfc, 0x06, 0xf9, 0x1f, 0x00, 0x00, + 0x03, 0xfc, 0x07, 0xf8, 0x20, 0x00, 0x00, + 0x03, 0xfc, 0x1e, 0xe1, 0x19, 0x00, 0x00, + 0x03, 0xfc, 0x09, 0xf6, 0x21, 0x00, 0x00, + 0x03, 0xfc, 0x0a, 0xf5, 0x22, 0x00, 0x00, + 0x03, 0xfc, 0x0b, 0xf4, 0x23, 0x00, 0x00, + 0x03, 0xfc, 0x1b, 0xe4, 0x16, 0x00, 0x00, + 0x03, 0xfc, 0x0d, 0xf2, 0x24, 0x00, 0x00, + 0x03, 0xfc, 0x0e, 0xf1, 0x25, 0x00, 0x00, + 0x03, 0xfc, 0x0f, 0xf0, 0x26, 0x00, 0x00, + 0x03, 0xfc, 0x16, 0xe9, 0x28, 0x00, 0x00, + 0x03, 0xfc, 0x41, 0xbe, 0x37, 0x00, 0x00, + 0x03, 0xfc, 0x12, 0xed, 0x27, 0x00, 0x00, + 0x03, 0xfc, 0x11, 0xee, 0x2a, 0x00, 0x00, + 0x03, 0xfc, 0x48, 0xb7, 0x2c, 0x00, 0x00, + 0x03, 0xfc, 0x4a, 0xb5, 0x3c, 0x00, 0x00, + 0x03, 0xfc, 0x47, 0xb8, 0x15, 0x01, 0x00, + 0x03, 0xfc, 0x45, 0xba, 0x0b, 0x01, 0x00, + 0x03, 0xfc, 0x5e, 0xa1, 0x43, 0x00, 0x00, + 0x03, 0xfc, 0x5a, 0xa5, 0x42, 0x00, 0x00, + 0x03, 0xfc, 0x5b, 0xa4, 0x4b, 0x00, 0x00, + 0x03, 0xfc, 0x5f, 0xa0, 0x4e, 0x00, 0x00, +}; + +/* TwinHan AzureWave AD-TU700(704J) */ +static struct dvb_usb_rc_key af9015_rc_keys_twinhan[] = { + { 0x05, 0x3f, KEY_POWER }, + { 0x00, 0x19, KEY_FAVORITES }, /* Favorite List */ + { 0x00, 0x04, KEY_TEXT }, /* Teletext */ + { 0x00, 0x0e, KEY_POWER }, + { 0x00, 0x0e, KEY_INFO }, /* Preview */ + { 0x00, 0x08, KEY_EPG }, /* Info/EPG */ + { 0x00, 0x0f, KEY_LIST }, /* Record List */ + { 0x00, 0x1e, KEY_1 }, + { 0x00, 0x1f, KEY_2 }, + { 0x00, 0x20, KEY_3 }, + { 0x00, 0x21, KEY_4 }, + { 0x00, 0x22, KEY_5 }, + { 0x00, 0x23, KEY_6 }, + { 0x00, 0x24, KEY_7 }, + { 0x00, 0x25, KEY_8 }, + { 0x00, 0x26, KEY_9 }, + { 0x00, 0x27, KEY_0 }, + { 0x00, 0x29, KEY_CANCEL }, /* Cancel */ + { 0x00, 0x4c, KEY_CLEAR }, /* Clear */ + { 0x00, 0x2a, KEY_BACK }, /* Back */ + { 0x00, 0x2b, KEY_TAB }, /* Tab */ + { 0x00, 0x52, KEY_UP }, /* up arrow */ + { 0x00, 0x51, KEY_DOWN }, /* down arrow */ + { 0x00, 0x4f, KEY_RIGHT }, /* right arrow */ + { 0x00, 0x50, KEY_LEFT }, /* left arrow */ + { 0x00, 0x28, KEY_ENTER }, /* Enter / ok */ + { 0x02, 0x52, KEY_VOLUMEUP }, + { 0x02, 0x51, KEY_VOLUMEDOWN }, + { 0x00, 0x4e, KEY_CHANNELDOWN }, + { 0x00, 0x4b, KEY_CHANNELUP }, + { 0x00, 0x4a, KEY_RECORD }, + { 0x01, 0x11, KEY_PLAY }, + { 0x00, 0x17, KEY_PAUSE }, + { 0x00, 0x0c, KEY_REWIND }, /* FR << */ + { 0x00, 0x11, KEY_FASTFORWARD }, /* FF >> */ + { 0x01, 0x15, KEY_PREVIOUS }, /* Replay */ + { 0x01, 0x0e, KEY_NEXT }, /* Skip */ + { 0x00, 0x13, KEY_CAMERA }, /* Capture */ + { 0x01, 0x0f, KEY_LANGUAGE }, /* SAP */ + { 0x01, 0x13, KEY_TV2 }, /* PIP */ + { 0x00, 0x1d, KEY_ZOOM }, /* Full Screen */ + { 0x01, 0x17, KEY_SUBTITLE }, /* Subtitle / CC */ + { 0x00, 0x10, KEY_MUTE }, + { 0x01, 0x19, KEY_AUDIO }, /* L/R */ /* TODO better event */ + { 0x01, 0x16, KEY_SLEEP }, /* Hibernate */ + { 0x01, 0x16, KEY_SWITCHVIDEOMODE }, + /* A/V */ /* TODO does not work */ + { 0x00, 0x06, KEY_AGAIN }, /* Recall */ + { 0x01, 0x16, KEY_KPPLUS }, /* Zoom+ */ /* TODO does not work */ + { 0x01, 0x16, KEY_KPMINUS }, /* Zoom- */ /* TODO does not work */ + { 0x02, 0x15, KEY_RED }, + { 0x02, 0x0a, KEY_GREEN }, + { 0x02, 0x1c, KEY_YELLOW }, + { 0x02, 0x05, KEY_BLUE }, +}; + +static u8 af9015_ir_table_twinhan[] = { + 0x00, 0xff, 0x16, 0xe9, 0x3f, 0x05, 0x00, + 0x00, 0xff, 0x07, 0xf8, 0x16, 0x01, 0x00, + 0x00, 0xff, 0x14, 0xeb, 0x11, 0x01, 0x00, + 0x00, 0xff, 0x1a, 0xe5, 0x4d, 0x00, 0x00, + 0x00, 0xff, 0x4c, 0xb3, 0x17, 0x00, 0x00, + 0x00, 0xff, 0x12, 0xed, 0x11, 0x00, 0x00, + 0x00, 0xff, 0x40, 0xbf, 0x0c, 0x00, 0x00, + 0x00, 0xff, 0x11, 0xee, 0x4a, 0x00, 0x00, + 0x00, 0xff, 0x54, 0xab, 0x13, 0x00, 0x00, + 0x00, 0xff, 0x41, 0xbe, 0x15, 0x01, 0x00, + 0x00, 0xff, 0x42, 0xbd, 0x0e, 0x01, 0x00, + 0x00, 0xff, 0x43, 0xbc, 0x17, 0x01, 0x00, + 0x00, 0xff, 0x50, 0xaf, 0x0f, 0x01, 0x00, + 0x00, 0xff, 0x4d, 0xb2, 0x1d, 0x00, 0x00, + 0x00, 0xff, 0x47, 0xb8, 0x13, 0x01, 0x00, + 0x00, 0xff, 0x05, 0xfa, 0x4b, 0x00, 0x00, + 0x00, 0xff, 0x02, 0xfd, 0x4e, 0x00, 0x00, + 0x00, 0xff, 0x0e, 0xf1, 0x06, 0x00, 0x00, + 0x00, 0xff, 0x1e, 0xe1, 0x52, 0x02, 0x00, + 0x00, 0xff, 0x0a, 0xf5, 0x51, 0x02, 0x00, + 0x00, 0xff, 0x10, 0xef, 0x10, 0x00, 0x00, + 0x00, 0xff, 0x49, 0xb6, 0x19, 0x01, 0x00, + 0x00, 0xff, 0x15, 0xea, 0x27, 0x00, 0x00, + 0x00, 0xff, 0x03, 0xfc, 0x1e, 0x00, 0x00, + 0x00, 0xff, 0x01, 0xfe, 0x1f, 0x00, 0x00, + 0x00, 0xff, 0x06, 0xf9, 0x20, 0x00, 0x00, + 0x00, 0xff, 0x09, 0xf6, 0x21, 0x00, 0x00, + 0x00, 0xff, 0x1d, 0xe2, 0x22, 0x00, 0x00, + 0x00, 0xff, 0x1f, 0xe0, 0x23, 0x00, 0x00, + 0x00, 0xff, 0x0d, 0xf2, 0x24, 0x00, 0x00, + 0x00, 0xff, 0x19, 0xe6, 0x25, 0x00, 0x00, + 0x00, 0xff, 0x1b, 0xe4, 0x26, 0x00, 0x00, + 0x00, 0xff, 0x00, 0xff, 0x2b, 0x00, 0x00, + 0x00, 0xff, 0x4a, 0xb5, 0x4c, 0x00, 0x00, + 0x00, 0xff, 0x4b, 0xb4, 0x52, 0x00, 0x00, + 0x00, 0xff, 0x51, 0xae, 0x51, 0x00, 0x00, + 0x00, 0xff, 0x52, 0xad, 0x4f, 0x00, 0x00, + 0x00, 0xff, 0x4e, 0xb1, 0x50, 0x00, 0x00, + 0x00, 0xff, 0x0c, 0xf3, 0x29, 0x00, 0x00, + 0x00, 0xff, 0x4f, 0xb0, 0x28, 0x00, 0x00, + 0x00, 0xff, 0x13, 0xec, 0x2a, 0x00, 0x00, + 0x00, 0xff, 0x17, 0xe8, 0x19, 0x00, 0x00, + 0x00, 0xff, 0x04, 0xfb, 0x0f, 0x00, 0x00, + 0x00, 0xff, 0x48, 0xb7, 0x0e, 0x00, 0x00, + 0x00, 0xff, 0x0f, 0xf0, 0x04, 0x00, 0x00, + 0x00, 0xff, 0x1c, 0xe3, 0x08, 0x00, 0x00, + 0x00, 0xff, 0x18, 0xe7, 0x15, 0x02, 0x00, + 0x00, 0xff, 0x53, 0xac, 0x0a, 0x02, 0x00, + 0x00, 0xff, 0x5e, 0xa1, 0x1c, 0x02, 0x00, + 0x00, 0xff, 0x5f, 0xa0, 0x05, 0x02, 0x00, +}; + +/* A-Link DTU(m) */ +static struct dvb_usb_rc_key af9015_rc_keys_a_link[] = { + { 0x00, 0x1e, KEY_1 }, + { 0x00, 0x1f, KEY_2 }, + { 0x00, 0x20, KEY_3 }, + { 0x00, 0x21, KEY_4 }, + { 0x00, 0x22, KEY_5 }, + { 0x00, 0x23, KEY_6 }, + { 0x00, 0x24, KEY_7 }, + { 0x00, 0x25, KEY_8 }, + { 0x00, 0x26, KEY_9 }, + { 0x00, 0x27, KEY_0 }, + { 0x00, 0x2e, KEY_CHANNELUP }, + { 0x00, 0x2d, KEY_CHANNELDOWN }, + { 0x04, 0x28, KEY_ZOOM }, + { 0x00, 0x41, KEY_MUTE }, + { 0x00, 0x42, KEY_VOLUMEDOWN }, + { 0x00, 0x43, KEY_VOLUMEUP }, + { 0x00, 0x44, KEY_GOTO }, /* jump */ + { 0x05, 0x45, KEY_POWER }, +}; + +static u8 af9015_ir_table_a_link[] = { + 0x08, 0xf7, 0x12, 0xed, 0x45, 0x05, 0x00, /* power */ + 0x08, 0xf7, 0x1a, 0xe5, 0x41, 0x00, 0x00, /* mute */ + 0x08, 0xf7, 0x01, 0xfe, 0x1e, 0x00, 0x00, /* 1 */ + 0x08, 0xf7, 0x1c, 0xe3, 0x21, 0x00, 0x00, /* 4 */ + 0x08, 0xf7, 0x03, 0xfc, 0x24, 0x00, 0x00, /* 7 */ + 0x08, 0xf7, 0x05, 0xfa, 0x28, 0x04, 0x00, /* zoom */ + 0x08, 0xf7, 0x00, 0xff, 0x43, 0x00, 0x00, /* volume up */ + 0x08, 0xf7, 0x16, 0xe9, 0x42, 0x00, 0x00, /* volume down */ + 0x08, 0xf7, 0x0f, 0xf0, 0x1f, 0x00, 0x00, /* 2 */ + 0x08, 0xf7, 0x0d, 0xf2, 0x22, 0x00, 0x00, /* 5 */ + 0x08, 0xf7, 0x1b, 0xe4, 0x25, 0x00, 0x00, /* 8 */ + 0x08, 0xf7, 0x06, 0xf9, 0x27, 0x00, 0x00, /* 0 */ + 0x08, 0xf7, 0x14, 0xeb, 0x2e, 0x00, 0x00, /* channel up */ + 0x08, 0xf7, 0x1d, 0xe2, 0x2d, 0x00, 0x00, /* channel down */ + 0x08, 0xf7, 0x02, 0xfd, 0x20, 0x00, 0x00, /* 3 */ + 0x08, 0xf7, 0x18, 0xe7, 0x23, 0x00, 0x00, /* 6 */ + 0x08, 0xf7, 0x04, 0xfb, 0x26, 0x00, 0x00, /* 9 */ + 0x08, 0xf7, 0x07, 0xf8, 0x44, 0x00, 0x00, /* jump */ +}; + +/* MSI DIGIVOX mini II V3.0 */ +static struct dvb_usb_rc_key af9015_rc_keys_msi[] = { + { 0x00, 0x1e, KEY_1 }, + { 0x00, 0x1f, KEY_2 }, + { 0x00, 0x20, KEY_3 }, + { 0x00, 0x21, KEY_4 }, + { 0x00, 0x22, KEY_5 }, + { 0x00, 0x23, KEY_6 }, + { 0x00, 0x24, KEY_7 }, + { 0x00, 0x25, KEY_8 }, + { 0x00, 0x26, KEY_9 }, + { 0x00, 0x27, KEY_0 }, + { 0x03, 0x0f, KEY_CHANNELUP }, + { 0x03, 0x0e, KEY_CHANNELDOWN }, + { 0x00, 0x42, KEY_VOLUMEDOWN }, + { 0x00, 0x43, KEY_VOLUMEUP }, + { 0x05, 0x45, KEY_POWER }, + { 0x00, 0x52, KEY_UP }, /* up */ + { 0x00, 0x51, KEY_DOWN }, /* down */ + { 0x00, 0x28, KEY_ENTER }, +}; + +static u8 af9015_ir_table_msi[] = { + 0x03, 0xfc, 0x17, 0xe8, 0x45, 0x05, 0x00, /* power */ + 0x03, 0xfc, 0x0d, 0xf2, 0x51, 0x00, 0x00, /* down */ + 0x03, 0xfc, 0x03, 0xfc, 0x52, 0x00, 0x00, /* up */ + 0x03, 0xfc, 0x1a, 0xe5, 0x1e, 0x00, 0x00, /* 1 */ + 0x03, 0xfc, 0x02, 0xfd, 0x1f, 0x00, 0x00, /* 2 */ + 0x03, 0xfc, 0x04, 0xfb, 0x20, 0x00, 0x00, /* 3 */ + 0x03, 0xfc, 0x1c, 0xe3, 0x21, 0x00, 0x00, /* 4 */ + 0x03, 0xfc, 0x08, 0xf7, 0x22, 0x00, 0x00, /* 5 */ + 0x03, 0xfc, 0x1d, 0xe2, 0x23, 0x00, 0x00, /* 6 */ + 0x03, 0xfc, 0x11, 0xee, 0x24, 0x00, 0x00, /* 7 */ + 0x03, 0xfc, 0x0b, 0xf4, 0x25, 0x00, 0x00, /* 8 */ + 0x03, 0xfc, 0x10, 0xef, 0x26, 0x00, 0x00, /* 9 */ + 0x03, 0xfc, 0x09, 0xf6, 0x27, 0x00, 0x00, /* 0 */ + 0x03, 0xfc, 0x14, 0xeb, 0x43, 0x00, 0x00, /* volume up */ + 0x03, 0xfc, 0x1f, 0xe0, 0x42, 0x00, 0x00, /* volume down */ + 0x03, 0xfc, 0x15, 0xea, 0x0f, 0x03, 0x00, /* channel up */ + 0x03, 0xfc, 0x05, 0xfa, 0x0e, 0x03, 0x00, /* channel down */ + 0x03, 0xfc, 0x16, 0xe9, 0x28, 0x00, 0x00, /* enter */ +}; + +/* MYGICTV U718 */ +static struct dvb_usb_rc_key af9015_rc_keys_mygictv[] = { + { 0x00, 0x3d, KEY_SWITCHVIDEOMODE }, + /* TV / AV */ + { 0x05, 0x45, KEY_POWER }, + { 0x00, 0x1e, KEY_1 }, + { 0x00, 0x1f, KEY_2 }, + { 0x00, 0x20, KEY_3 }, + { 0x00, 0x21, KEY_4 }, + { 0x00, 0x22, KEY_5 }, + { 0x00, 0x23, KEY_6 }, + { 0x00, 0x24, KEY_7 }, + { 0x00, 0x25, KEY_8 }, + { 0x00, 0x26, KEY_9 }, + { 0x00, 0x27, KEY_0 }, + { 0x00, 0x41, KEY_MUTE }, + { 0x00, 0x2a, KEY_ESC }, /* Esc */ + { 0x00, 0x2e, KEY_CHANNELUP }, + { 0x00, 0x2d, KEY_CHANNELDOWN }, + { 0x00, 0x42, KEY_VOLUMEDOWN }, + { 0x00, 0x43, KEY_VOLUMEUP }, + { 0x00, 0x52, KEY_UP }, /* up arrow */ + { 0x00, 0x51, KEY_DOWN }, /* down arrow */ + { 0x00, 0x4f, KEY_RIGHT }, /* right arrow */ + { 0x00, 0x50, KEY_LEFT }, /* left arrow */ + { 0x00, 0x28, KEY_ENTER }, /* ok */ + { 0x01, 0x15, KEY_RECORD }, + { 0x03, 0x13, KEY_PLAY }, + { 0x01, 0x13, KEY_PAUSE }, + { 0x01, 0x16, KEY_STOP }, + { 0x03, 0x07, KEY_REWIND }, /* FR << */ + { 0x03, 0x09, KEY_FASTFORWARD }, /* FF >> */ + { 0x00, 0x3b, KEY_TIME }, /* TimeShift */ + { 0x00, 0x3e, KEY_CAMERA }, /* Snapshot */ + { 0x03, 0x16, KEY_CYCLEWINDOWS }, /* yellow, min / max */ + { 0x00, 0x00, KEY_ZOOM }, /* 'select' (?) */ + { 0x03, 0x16, KEY_SHUFFLE }, /* Shuffle */ + { 0x03, 0x45, KEY_POWER }, +}; + +static u8 af9015_ir_table_mygictv[] = { + 0x02, 0xbd, 0x0c, 0xf3, 0x3d, 0x00, 0x00, /* TV / AV */ + 0x02, 0xbd, 0x14, 0xeb, 0x45, 0x05, 0x00, /* power */ + 0x02, 0xbd, 0x00, 0xff, 0x1e, 0x00, 0x00, /* 1 */ + 0x02, 0xbd, 0x01, 0xfe, 0x1f, 0x00, 0x00, /* 2 */ + 0x02, 0xbd, 0x02, 0xfd, 0x20, 0x00, 0x00, /* 3 */ + 0x02, 0xbd, 0x03, 0xfc, 0x21, 0x00, 0x00, /* 4 */ + 0x02, 0xbd, 0x04, 0xfb, 0x22, 0x00, 0x00, /* 5 */ + 0x02, 0xbd, 0x05, 0xfa, 0x23, 0x00, 0x00, /* 6 */ + 0x02, 0xbd, 0x06, 0xf9, 0x24, 0x00, 0x00, /* 7 */ + 0x02, 0xbd, 0x07, 0xf8, 0x25, 0x00, 0x00, /* 8 */ + 0x02, 0xbd, 0x08, 0xf7, 0x26, 0x00, 0x00, /* 9 */ + 0x02, 0xbd, 0x09, 0xf6, 0x27, 0x00, 0x00, /* 0 */ + 0x02, 0xbd, 0x0a, 0xf5, 0x41, 0x00, 0x00, /* mute */ + 0x02, 0xbd, 0x1c, 0xe3, 0x2a, 0x00, 0x00, /* esc */ + 0x02, 0xbd, 0x1f, 0xe0, 0x43, 0x00, 0x00, /* volume up */ + 0x02, 0xbd, 0x12, 0xed, 0x52, 0x00, 0x00, /* up arrow */ + 0x02, 0xbd, 0x11, 0xee, 0x50, 0x00, 0x00, /* left arrow */ + 0x02, 0xbd, 0x15, 0xea, 0x28, 0x00, 0x00, /* ok */ + 0x02, 0xbd, 0x10, 0xef, 0x4f, 0x00, 0x00, /* right arrow */ + 0x02, 0xbd, 0x13, 0xec, 0x51, 0x00, 0x00, /* down arrow */ + 0x02, 0xbd, 0x0e, 0xf1, 0x42, 0x00, 0x00, /* volume down */ + 0x02, 0xbd, 0x19, 0xe6, 0x15, 0x01, 0x00, /* record */ + 0x02, 0xbd, 0x1e, 0xe1, 0x13, 0x03, 0x00, /* play */ + 0x02, 0xbd, 0x16, 0xe9, 0x16, 0x01, 0x00, /* stop */ + 0x02, 0xbd, 0x0b, 0xf4, 0x28, 0x04, 0x00, /* yellow, min / max */ + 0x02, 0xbd, 0x0f, 0xf0, 0x3b, 0x00, 0x00, /* time shift */ + 0x02, 0xbd, 0x18, 0xe7, 0x2e, 0x00, 0x00, /* channel up */ + 0x02, 0xbd, 0x1a, 0xe5, 0x2d, 0x00, 0x00, /* channel down */ + 0x02, 0xbd, 0x17, 0xe8, 0x3e, 0x00, 0x00, /* snapshot */ + 0x02, 0xbd, 0x40, 0xbf, 0x13, 0x01, 0x00, /* pause */ + 0x02, 0xbd, 0x41, 0xbe, 0x09, 0x03, 0x00, /* FF >> */ + 0x02, 0xbd, 0x42, 0xbd, 0x07, 0x03, 0x00, /* FR << */ + 0x02, 0xbd, 0x43, 0xbc, 0x00, 0x00, 0x00, /* 'select' (?) */ + 0x02, 0xbd, 0x44, 0xbb, 0x16, 0x03, 0x00, /* shuffle */ + 0x02, 0xbd, 0x45, 0xba, 0x45, 0x03, 0x00, /* power */ +}; + +/* KWorld PlusTV Dual DVB-T Stick (DVB-T 399U) */ +static u8 af9015_ir_table_kworld[] = { + 0x86, 0x6b, 0x0c, 0xf3, 0x2e, 0x07, 0x00, + 0x86, 0x6b, 0x16, 0xe9, 0x2d, 0x07, 0x00, + 0x86, 0x6b, 0x1d, 0xe2, 0x37, 0x07, 0x00, + 0x86, 0x6b, 0x00, 0xff, 0x1e, 0x07, 0x00, + 0x86, 0x6b, 0x01, 0xfe, 0x1f, 0x07, 0x00, + 0x86, 0x6b, 0x02, 0xfd, 0x20, 0x07, 0x00, + 0x86, 0x6b, 0x03, 0xfc, 0x21, 0x07, 0x00, + 0x86, 0x6b, 0x04, 0xfb, 0x22, 0x07, 0x00, + 0x86, 0x6b, 0x05, 0xfa, 0x23, 0x07, 0x00, + 0x86, 0x6b, 0x06, 0xf9, 0x24, 0x07, 0x00, + 0x86, 0x6b, 0x07, 0xf8, 0x25, 0x07, 0x00, + 0x86, 0x6b, 0x08, 0xf7, 0x26, 0x07, 0x00, + 0x86, 0x6b, 0x09, 0xf6, 0x4d, 0x07, 0x00, + 0x86, 0x6b, 0x0a, 0xf5, 0x4e, 0x07, 0x00, + 0x86, 0x6b, 0x14, 0xeb, 0x4f, 0x07, 0x00, + 0x86, 0x6b, 0x1e, 0xe1, 0x50, 0x07, 0x00, + 0x86, 0x6b, 0x17, 0xe8, 0x52, 0x07, 0x00, + 0x86, 0x6b, 0x1f, 0xe0, 0x51, 0x07, 0x00, + 0x86, 0x6b, 0x0e, 0xf1, 0x0b, 0x07, 0x00, + 0x86, 0x6b, 0x20, 0xdf, 0x0c, 0x07, 0x00, + 0x86, 0x6b, 0x42, 0xbd, 0x0d, 0x07, 0x00, + 0x86, 0x6b, 0x0b, 0xf4, 0x0e, 0x07, 0x00, + 0x86, 0x6b, 0x43, 0xbc, 0x0f, 0x07, 0x00, + 0x86, 0x6b, 0x10, 0xef, 0x10, 0x07, 0x00, + 0x86, 0x6b, 0x21, 0xde, 0x11, 0x07, 0x00, + 0x86, 0x6b, 0x13, 0xec, 0x12, 0x07, 0x00, + 0x86, 0x6b, 0x11, 0xee, 0x13, 0x07, 0x00, + 0x86, 0x6b, 0x12, 0xed, 0x14, 0x07, 0x00, + 0x86, 0x6b, 0x19, 0xe6, 0x15, 0x07, 0x00, + 0x86, 0x6b, 0x1a, 0xe5, 0x16, 0x07, 0x00, + 0x86, 0x6b, 0x1b, 0xe4, 0x17, 0x07, 0x00, + 0x86, 0x6b, 0x4b, 0xb4, 0x18, 0x07, 0x00, + 0x86, 0x6b, 0x40, 0xbf, 0x19, 0x07, 0x00, + 0x86, 0x6b, 0x44, 0xbb, 0x1a, 0x07, 0x00, + 0x86, 0x6b, 0x41, 0xbe, 0x1b, 0x07, 0x00, + 0x86, 0x6b, 0x22, 0xdd, 0x1c, 0x07, 0x00, + 0x86, 0x6b, 0x15, 0xea, 0x1d, 0x07, 0x00, + 0x86, 0x6b, 0x0f, 0xf0, 0x3f, 0x07, 0x00, + 0x86, 0x6b, 0x1c, 0xe3, 0x40, 0x07, 0x00, + 0x86, 0x6b, 0x4a, 0xb5, 0x41, 0x07, 0x00, + 0x86, 0x6b, 0x48, 0xb7, 0x42, 0x07, 0x00, + 0x86, 0x6b, 0x49, 0xb6, 0x43, 0x07, 0x00, + 0x86, 0x6b, 0x18, 0xe7, 0x44, 0x07, 0x00, + 0x86, 0x6b, 0x23, 0xdc, 0x45, 0x07, 0x00, +}; + +#endif diff --git a/drivers/media/dvb/dvb-usb/dvb-usb-ids.h b/drivers/media/dvb/dvb-usb/dvb-usb-ids.h index 81369b7..2558f2b 100644 --- a/drivers/media/dvb/dvb-usb/dvb-usb-ids.h +++ b/drivers/media/dvb/dvb-usb/dvb-usb-ids.h @@ -34,12 +34,14 @@ #define USB_VID_HAUPPAUGE 0x2040 #define USB_VID_HYPER_PALTEK 0x1025 #define USB_VID_KWORLD 0xeb2a +#define USB_VID_KWORLD_2 0x1b80 #define USB_VID_KYE 0x0458 #define USB_VID_LEADTEK 0x0413 #define USB_VID_LITEON 0x04ca #define USB_VID_MEDION 0x1660 #define USB_VID_MIGLIA 0x18f3 #define USB_VID_MSI 0x0db0 +#define USB_VID_MSI_2 0x1462 #define USB_VID_OPERA1 0x695c #define USB_VID_PINNACLE 0x2304 #define USB_VID_TECHNOTREND 0x0b48 @@ -51,15 +53,18 @@ #define USB_VID_WIDEVIEW 0x14aa #define USB_VID_GIGABYTE 0x1044 #define USB_VID_YUAN 0x1164 - +#define USB_VID_XTENSIONS 0x1ae7 /* Product IDs */ #define USB_PID_ADSTECH_USB2_COLD 0xa333 #define USB_PID_ADSTECH_USB2_WARM 0xa334 #define USB_PID_AFATECH_AF9005 0x9020 +#define USB_PID_AFATECH_AF9015_9015 0x9015 +#define USB_PID_AFATECH_AF9015_9016 0x9016 #define USB_VID_ALINK_DTU 0xf170 #define USB_PID_ANSONIC_DVBT_USB 0x6000 #define USB_PID_ANYSEE 0x861f +#define USB_PID_AZUREWAVE_AD_TU700 0x3237 #define USB_PID_AVERMEDIA_DVBT_USB_COLD 0x0001 #define USB_PID_AVERMEDIA_DVBT_USB_WARM 0x0002 #define USB_PID_AVERMEDIA_DVBT_USB2_COLD 0xa800 @@ -89,9 +94,12 @@ #define USB_PID_UNIWILL_STK7700P 0x6003 #define USB_PID_GRANDTEC_DVBT_USB_COLD 0x0fa0 #define USB_PID_GRANDTEC_DVBT_USB_WARM 0x0fa1 +#define USB_PID_KWORLD_399U 0xe399 +#define USB_PID_KWORLD_PC160_2T 0xc160 #define USB_PID_KWORLD_VSTREAM_COLD 0x17de #define USB_PID_KWORLD_VSTREAM_WARM 0x17df #define USB_PID_TERRATEC_CINERGY_T_USB_XE 0x0055 +#define USB_PID_TERRATEC_CINERGY_T_USB_XE_REV2 0x0069 #define USB_PID_TWINHAN_VP7041_COLD 0x3201 #define USB_PID_TWINHAN_VP7041_WARM 0x3202 #define USB_PID_TWINHAN_VP7020_COLD 0x3203 @@ -100,6 +108,7 @@ #define USB_PID_TWINHAN_VP7045_WARM 0x3206 #define USB_PID_TWINHAN_VP7021_COLD 0x3207 #define USB_PID_TWINHAN_VP7021_WARM 0x3208 +#define USB_PID_TINYTWIN 0x3226 #define USB_PID_DNTV_TINYUSB2_COLD 0x3223 #define USB_PID_DNTV_TINYUSB2_WARM 0x3224 #define USB_PID_ULTIMA_TVBOX_COLD 0x8105 @@ -146,6 +155,8 @@ #define USB_PID_AVERMEDIA_HYBRID_ULTRA_USB_M039R 0x0039 #define USB_PID_AVERMEDIA_HYBRID_ULTRA_USB_M039R_ATSC 0x1039 #define USB_PID_AVERMEDIA_HYBRID_ULTRA_USB_M039R_DVBT 0x2039 +#define USB_PID_AVERMEDIA_VOLAR_X 0xa815 +#define USB_PID_AVERMEDIA_VOLAR_X_2 0x8150 #define USB_PID_TECHNOTREND_CONNECT_S2400 0x3006 #define USB_PID_TERRATEC_CINERGY_DT_XS_DIVERSITY 0x005a #define USB_PID_TERRATEC_CINERGY_HT_USB_XE 0x0058 @@ -155,6 +166,7 @@ #define USB_PID_PINNACLE_PCTV2000E 0x022c #define USB_PID_PINNACLE_PCTV_DVB_T_FLASH 0x0228 #define USB_PID_PINNACLE_PCTV_DUAL_DIVERSITY_DVB_T 0x0229 +#define USB_PID_PINNACLE_PCTV71E 0x022b #define USB_PID_PINNACLE_PCTV72E 0x0236 #define USB_PID_PINNACLE_PCTV73E 0x0237 #define USB_PID_PCTV_200E 0x020e @@ -193,6 +205,7 @@ #define USB_PID_WINFAST_DTV_DONGLE_WARM 0x6026 #define USB_PID_WINFAST_DTV_DONGLE_STK7700P 0x6f00 #define USB_PID_WINFAST_DTV_DONGLE_STK7700P_2 0x6f01 +#define USB_PID_WINFAST_DTV_DONGLE_GOLD 0x6029 #define USB_PID_GENPIX_8PSK_REV_1_COLD 0x0200 #define USB_PID_GENPIX_8PSK_REV_1_WARM 0x0201 #define USB_PID_GENPIX_8PSK_REV_2 0x0202 @@ -200,6 +213,7 @@ #define USB_PID_GENPIX_SKYWALKER_CW3K 0x0204 #define USB_PID_SIGMATEK_DVB_110 0x6610 #define USB_PID_MSI_DIGI_VOX_MINI_II 0x1513 +#define USB_PID_MSI_DIGIVOX_DUO 0x8801 #define USB_PID_OPERA1_COLD 0x2830 #define USB_PID_OPERA1_WARM 0x3829 #define USB_PID_LIFEVIEW_TV_WALKER_TWIN_COLD 0x0514 @@ -209,5 +223,6 @@ #define USB_PID_ASUS_U3100 0x173f #define USB_PID_YUAN_EC372S 0x1edc #define USB_PID_DW2102 0x2102 +#define USB_PID_XTENSIONS_XD_380 0x0381 #endif -- cgit v0.10.2 From 28f947a95386861c54de2bf7753dda011c8e15c3 Mon Sep 17 00:00:00 2001 From: Antti Palosaari Date: Tue, 16 Sep 2008 14:22:43 -0300 Subject: V4L/DVB (8973): af9013: fix compile error coming from u64 div - fix compile error coming from u64 div Signed-off-by: Antti Palosaari Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/dvb/frontends/af9013.c b/drivers/media/dvb/frontends/af9013.c index 9f2129d..50e1e3f 100644 --- a/drivers/media/dvb/frontends/af9013.c +++ b/drivers/media/dvb/frontends/af9013.c @@ -941,7 +941,6 @@ static int af9013_update_ber_unc(struct dvb_frontend *fe) u32 error_bit_count = 0; u32 total_bit_count = 0; u32 abort_packet_count = 0; - u64 numerator, denominator; state->ber = 0; @@ -979,11 +978,8 @@ static int af9013_update_ber_unc(struct dvb_frontend *fe) total_bit_count = total_bit_count - abort_packet_count; total_bit_count = total_bit_count * 204 * 8; - if (total_bit_count) { - numerator = error_bit_count * 1000000000; - denominator = total_bit_count; - state->ber = numerator / denominator; - } + if (total_bit_count) + state->ber = error_bit_count * 1000000000 / total_bit_count; state->ucblocks += abort_packet_count; -- cgit v0.10.2 From 111f9ecf174655f3da2b266602f20f11e6a6a4c7 Mon Sep 17 00:00:00 2001 From: Mikko Ohtamaa Date: Fri, 19 Sep 2008 18:26:05 -0300 Subject: V4L/DVB (8974): af9015: Add USB ID for Telestar Starstick 2 - Add USB ID for Telestar Starstick 2 (10b9:8000) Signed-off-by: Mikko Ohtamaa Signed-off-by: Antti Palosaari Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/dvb/dvb-usb/af9015.c b/drivers/media/dvb/dvb-usb/af9015.c index a284648..505432b 100644 --- a/drivers/media/dvb/dvb-usb/af9015.c +++ b/drivers/media/dvb/dvb-usb/af9015.c @@ -1196,6 +1196,7 @@ static struct usb_device_id af9015_usb_table[] = { /* 10 */{USB_DEVICE(USB_VID_XTENSIONS, USB_PID_XTENSIONS_XD_380)}, {USB_DEVICE(USB_VID_MSI_2, USB_PID_MSI_DIGIVOX_DUO)}, {USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_VOLAR_X_2)}, + {USB_DEVICE(USB_VID_TELESTAR, USB_PID_TELESTAR)}, {0}, }; MODULE_DEVICE_TABLE(usb, af9015_usb_table); @@ -1346,7 +1347,7 @@ static struct dvb_usb_device_properties af9015_properties[] = { .i2c_algo = &af9015_i2c_algo, - .num_device_descs = 3, + .num_device_descs = 4, .devices = { { .name = "Xtensions XD-380", @@ -1363,6 +1364,11 @@ static struct dvb_usb_device_properties af9015_properties[] = { .cold_ids = {&af9015_usb_table[12], NULL}, .warm_ids = {NULL}, }, + { + .name = "Telestar USB DVB-T", + .cold_ids = {&af9015_usb_table[13], NULL}, + .warm_ids = {NULL}, + }, } } }; diff --git a/drivers/media/dvb/dvb-usb/dvb-usb-ids.h b/drivers/media/dvb/dvb-usb/dvb-usb-ids.h index 2558f2b..60c241e 100644 --- a/drivers/media/dvb/dvb-usb/dvb-usb-ids.h +++ b/drivers/media/dvb/dvb-usb/dvb-usb-ids.h @@ -46,6 +46,7 @@ #define USB_VID_PINNACLE 0x2304 #define USB_VID_TECHNOTREND 0x0b48 #define USB_VID_TERRATEC 0x0ccd +#define USB_VID_TELESTAR 0x10b9 #define USB_VID_VISIONPLUS 0x13d3 #define USB_VID_TWINHAN 0x1822 #define USB_VID_ULTIMA_ELECTRONIC 0x05d8 @@ -224,5 +225,6 @@ #define USB_PID_YUAN_EC372S 0x1edc #define USB_PID_DW2102 0x2102 #define USB_PID_XTENSIONS_XD_380 0x0381 +#define USB_PID_TELESTAR 0x8000 #endif -- cgit v0.10.2 From a3765888a7edc4efe54293d8f7c6676cae61057e Mon Sep 17 00:00:00 2001 From: Antti Palosaari Date: Fri, 19 Sep 2008 18:34:06 -0300 Subject: V4L/DVB (8975): af9015: cleanup - cleanup Telestar Starstick 2 patch Signed-off-by: Antti Palosaari Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/dvb/dvb-usb/af9015.c b/drivers/media/dvb/dvb-usb/af9015.c index 505432b..f962d89 100644 --- a/drivers/media/dvb/dvb-usb/af9015.c +++ b/drivers/media/dvb/dvb-usb/af9015.c @@ -1196,7 +1196,7 @@ static struct usb_device_id af9015_usb_table[] = { /* 10 */{USB_DEVICE(USB_VID_XTENSIONS, USB_PID_XTENSIONS_XD_380)}, {USB_DEVICE(USB_VID_MSI_2, USB_PID_MSI_DIGIVOX_DUO)}, {USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_VOLAR_X_2)}, - {USB_DEVICE(USB_VID_TELESTAR, USB_PID_TELESTAR)}, + {USB_DEVICE(USB_VID_TELESTAR, USB_PID_TELESTAR_STARSTICK_2)}, {0}, }; MODULE_DEVICE_TABLE(usb, af9015_usb_table); @@ -1365,7 +1365,7 @@ static struct dvb_usb_device_properties af9015_properties[] = { .warm_ids = {NULL}, }, { - .name = "Telestar USB DVB-T", + .name = "Telestar Starstick 2", .cold_ids = {&af9015_usb_table[13], NULL}, .warm_ids = {NULL}, }, diff --git a/drivers/media/dvb/dvb-usb/dvb-usb-ids.h b/drivers/media/dvb/dvb-usb/dvb-usb-ids.h index 60c241e..66dc000 100644 --- a/drivers/media/dvb/dvb-usb/dvb-usb-ids.h +++ b/drivers/media/dvb/dvb-usb/dvb-usb-ids.h @@ -225,6 +225,6 @@ #define USB_PID_YUAN_EC372S 0x1edc #define USB_PID_DW2102 0x2102 #define USB_PID_XTENSIONS_XD_380 0x0381 -#define USB_PID_TELESTAR 0x8000 +#define USB_PID_TELESTAR_STARSTICK_2 0x8000 #endif -- cgit v0.10.2 From 05c1cab55c282199b85138dc1900b5d9bd6fb32a Mon Sep 17 00:00:00 2001 From: Antti Palosaari Date: Mon, 22 Sep 2008 12:32:37 -0300 Subject: V4L/DVB (8976): af9015: Add USB ID for AVerMedia A309 - AVerMedia A309 Mini Card (07ca:a309) Thanks-to: Dirk Vornheder Signed-off-by: Antti Palosaari Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/dvb/dvb-usb/af9015.c b/drivers/media/dvb/dvb-usb/af9015.c index f962d89..3f6217b 100644 --- a/drivers/media/dvb/dvb-usb/af9015.c +++ b/drivers/media/dvb/dvb-usb/af9015.c @@ -1197,6 +1197,7 @@ static struct usb_device_id af9015_usb_table[] = { {USB_DEVICE(USB_VID_MSI_2, USB_PID_MSI_DIGIVOX_DUO)}, {USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_VOLAR_X_2)}, {USB_DEVICE(USB_VID_TELESTAR, USB_PID_TELESTAR_STARSTICK_2)}, + {USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_A309)}, {0}, }; MODULE_DEVICE_TABLE(usb, af9015_usb_table); @@ -1347,7 +1348,7 @@ static struct dvb_usb_device_properties af9015_properties[] = { .i2c_algo = &af9015_i2c_algo, - .num_device_descs = 4, + .num_device_descs = 5, .devices = { { .name = "Xtensions XD-380", @@ -1369,6 +1370,11 @@ static struct dvb_usb_device_properties af9015_properties[] = { .cold_ids = {&af9015_usb_table[13], NULL}, .warm_ids = {NULL}, }, + { + .name = "AVerMedia A309", + .cold_ids = {&af9015_usb_table[14], NULL}, + .warm_ids = {NULL}, + }, } } }; diff --git a/drivers/media/dvb/dvb-usb/dvb-usb-ids.h b/drivers/media/dvb/dvb-usb/dvb-usb-ids.h index 66dc000..7ae262e 100644 --- a/drivers/media/dvb/dvb-usb/dvb-usb-ids.h +++ b/drivers/media/dvb/dvb-usb/dvb-usb-ids.h @@ -158,6 +158,7 @@ #define USB_PID_AVERMEDIA_HYBRID_ULTRA_USB_M039R_DVBT 0x2039 #define USB_PID_AVERMEDIA_VOLAR_X 0xa815 #define USB_PID_AVERMEDIA_VOLAR_X_2 0x8150 +#define USB_PID_AVERMEDIA_A309 0xa309 #define USB_PID_TECHNOTREND_CONNECT_S2400 0x3006 #define USB_PID_TERRATEC_CINERGY_DT_XS_DIVERSITY 0x005a #define USB_PID_TERRATEC_CINERGY_HT_USB_XE 0x0058 -- cgit v0.10.2 From 6b73eeafbc856c0cef7166242f0e55403407f355 Mon Sep 17 00:00:00 2001 From: Steven Toth Date: Thu, 4 Sep 2008 01:12:25 -0300 Subject: V4L/DVB (8985): S2API: Added dvb frontend changes to support a newer tuning API This is an experimental patch to add a new tuning mechanism for dvb frontends. Rather than passing fixed structures across the user/kernel boundary, which need to be revised for each new modulation type (or feature the kernel developers want to add), this implements a simpler message based approach, allowing fe commands to be broken down into a series of small fixed size transactions, presented in an array. The goal is to avoid changing the user/kernel ABI in the future, by simply creating new frontend commands (and sequencies of commands) that help us add support for brand new demodulator, delivery system or statistics related commmands. known issues: checkpatch voilations feedback from various developers yet to be implemented, relating to namespace conventions, variable length array passing conventions, and generally some optimization. This patch should support all existing tuning mechanisms through the new API, as well as adding 8PSK, DVB-S2 NBC-QPSK and ISDB-T API support. For testing and exercise purposes, see the latest tune.c tool available from http://www.steventoth.net/linux/s2 Signed-off-by: Steven Toth Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/dvb/dvb-core/dvb_frontend.c b/drivers/media/dvb/dvb-core/dvb_frontend.c index 3526e3e..e68974b 100644 --- a/drivers/media/dvb/dvb-core/dvb_frontend.c +++ b/drivers/media/dvb/dvb-core/dvb_frontend.c @@ -755,6 +755,535 @@ static int dvb_frontend_check_parameters(struct dvb_frontend *fe, return 0; } +struct tv_cmds_h tv_cmds[] = { + [TV_SEQ_UNDEFINED] = { + .name = "TV_SEQ_UNDEFINED", + .cmd = TV_SEQ_UNDEFINED, + .set = 1, + }, + [TV_SEQ_START] = { + .name = "TV_SEQ_START", + .cmd = TV_SEQ_START, + .set = 1, + }, + [TV_SEQ_CONTINUE] = { + .name = "TV_SEQ_CONTINUE", + .cmd = TV_SEQ_CONTINUE, + .set = 1, + }, + [TV_SEQ_COMPLETE] = { + .name = "TV_SEQ_COMPLETE", + .cmd = TV_SEQ_COMPLETE, + .set = 1, + }, + [TV_SEQ_TERMINATE] = { + .name = "TV_SEQ_TERMINATE", + .cmd = TV_SEQ_TERMINATE, + .set = 1, + }, + + /* Set */ + [TV_SET_FREQUENCY] = { + .name = "TV_SET_FREQUENCY", + .cmd = TV_SET_FREQUENCY, + .set = 1, + }, + [TV_SET_BANDWIDTH] = { + .name = "TV_SET_BANDWIDTH", + .cmd = TV_SET_BANDWIDTH, + .set = 1, + }, + [TV_SET_MODULATION] = { + .name = "TV_SET_MODULATION", + .cmd = TV_SET_MODULATION, + .set = 1, + }, + [TV_SET_INVERSION] = { + .name = "TV_SET_INVERSION", + .cmd = TV_SET_INVERSION, + .set = 1, + }, + [TV_SET_DISEQC_MASTER] = { + .name = "TV_SET_DISEQC_MASTER", + .cmd = TV_SET_DISEQC_MASTER, + .set = 1, + .buffer = 1, + }, + [TV_SET_SYMBOLRATE] = { + .name = "TV_SET_SYMBOLRATE", + .cmd = TV_SET_SYMBOLRATE, + .set = 1, + }, + [TV_SET_INNERFEC] = { + .name = "TV_SET_INNERFEC", + .cmd = TV_SET_INNERFEC, + .set = 1, + }, + [TV_SET_VOLTAGE] = { + .name = "TV_SET_VOLTAGE", + .cmd = TV_SET_VOLTAGE, + .set = 1, + }, + [TV_SET_TONE] = { + .name = "TV_SET_TONE", + .cmd = TV_SET_TONE, + .set = 1, + }, + [TV_SET_PILOT] = { + .name = "TV_SET_PILOT", + .cmd = TV_SET_PILOT, + .set = 1, + }, + [TV_SET_ROLLOFF] = { + .name = "TV_SET_ROLLOFF", + .cmd = TV_SET_ROLLOFF, + .set = 1, + }, + [TV_SET_DELIVERY_SYSTEM] = { + .name = "TV_SET_DELIVERY_SYSTEM", + .cmd = TV_SET_DELIVERY_SYSTEM, + .set = 1, + }, + [TV_SET_ISDB_SEGMENT_NUM] = { + .name = "TV_SET_ISDB_SEGMENT_NUM", + .cmd = TV_SET_ISDB_SEGMENT_NUM, + .set = 1, + }, + [TV_SET_ISDB_SEGMENT_WIDTH] = { + .name = "TV_SET_ISDB_SEGMENT_WIDTH", + .cmd = TV_SET_ISDB_SEGMENT_WIDTH, + .set = 1, + }, + + /* Get */ + [TV_GET_FREQUENCY] = { + .name = "TV_GET_FREQUENCY", + .cmd = TV_GET_FREQUENCY, + .set = 0, + }, + [TV_GET_BANDWIDTH] = { + .name = "TV_GET_BANDWIDTH", + .cmd = TV_GET_BANDWIDTH, + .set = 0, + }, + [TV_GET_MODULATION] = { + .name = "TV_GET_MODULATION", + .cmd = TV_GET_MODULATION, + .set = 0, + }, + [TV_GET_INVERSION] = { + .name = "TV_GET_INVERSION", + .cmd = TV_GET_INVERSION, + .set = 0, + }, + [TV_GET_DISEQC_SLAVE_REPLY] = { + .name = "TV_GET_DISEQC_SLAVE_REPLY", + .cmd = TV_GET_DISEQC_SLAVE_REPLY, + .set = 0, + .buffer = 1, + }, + [TV_GET_SYMBOLRATE] = { + .name = "TV_GET_SYMBOLRATE", + .cmd = TV_GET_SYMBOLRATE, + .set = 0, + }, + [TV_GET_INNERFEC] = { + .name = "TV_GET_INNERFEC", + .cmd = TV_GET_INNERFEC, + .set = 0, + }, + [TV_GET_VOLTAGE] = { + .name = "TV_GET_VOLTAGE", + .cmd = TV_GET_VOLTAGE, + .set = 0, + }, + [TV_GET_TONE] = { + .name = "TV_GET_TONE", + .cmd = TV_GET_TONE, + .set = 0, + }, + [TV_GET_PILOT] = { + .name = "TV_GET_PILOT", + .cmd = TV_GET_PILOT, + .set = 0, + }, + [TV_GET_ROLLOFF] = { + .name = "TV_GET_ROLLOFF", + .cmd = TV_GET_ROLLOFF, + .set = 0, + }, + [TV_GET_DELIVERY_SYSTEM] = { + .name = "TV_GET_DELIVERY_SYSTEM", + .cmd = TV_GET_DELIVERY_SYSTEM, + .set = 0, + }, + [TV_GET_ISDB_SEGMENT_NUM] = { + .name = "TV_GET_ISDB_SEGMENT_NUM", + .cmd = TV_GET_ISDB_SEGMENT_NUM, + .set = 0, + }, + [TV_GET_ISDB_SEGMENT_WIDTH] = { + .name = "TV_GET_ISDB_SEGMENT_WIDTH", + .cmd = TV_GET_ISDB_SEGMENT_WIDTH, + .set = 0, + }, + [TV_GET_ISDB_LAYERA_FEC] = { + .name = "TV_GET_ISDB_LAYERA_FEC", + .cmd = TV_GET_ISDB_LAYERA_FEC, + .set = 0, + }, + [TV_GET_ISDB_LAYERA_MODULATION] = { + .name = "TV_GET_ISDB_LAYERA_MODULATION", + .cmd = TV_GET_ISDB_LAYERA_MODULATION, + .set = 0, + }, + [TV_GET_ISDB_LAYERA_SEGMENT_WIDTH] = { + .name = "TV_GET_ISDB_LAYERA_SEGMENT_WIDTH", + .cmd = TV_GET_ISDB_LAYERA_SEGMENT_WIDTH, + .set = 0, + }, + [TV_GET_ISDB_LAYERB_FEC] = { + .name = "TV_GET_ISDB_LAYERB_FEC", + .cmd = TV_GET_ISDB_LAYERB_FEC, + .set = 0, + }, + [TV_GET_ISDB_LAYERB_MODULATION] = { + .name = "TV_GET_ISDB_LAYERB_MODULATION", + .cmd = TV_GET_ISDB_LAYERB_MODULATION, + .set = 0, + }, + [TV_GET_ISDB_LAYERB_SEGMENT_WIDTH] = { + .name = "TV_GET_ISDB_LAYERB_SEGMENT_WIDTH", + .cmd = TV_GET_ISDB_LAYERB_SEGMENT_WIDTH, + .set = 0, + }, + [TV_GET_ISDB_LAYERC_FEC] = { + .name = "TV_GET_ISDB_LAYERC_FEC", + .cmd = TV_GET_ISDB_LAYERC_FEC, + .set = 0, + }, + [TV_GET_ISDB_LAYERC_MODULATION] = { + .name = "TV_GET_ISDB_LAYERC_MODULATION", + .cmd = TV_GET_ISDB_LAYERC_MODULATION, + .set = 0, + }, + [TV_GET_ISDB_LAYERC_SEGMENT_WIDTH] = { + .name = "TV_GET_ISDB_LAYERC_SEGMENT_WIDTH", + .cmd = TV_GET_ISDB_LAYERC_SEGMENT_WIDTH, + .set = 0, + }, +}; + +void tv_property_dump(tv_property_t *tvp) +{ + int i; + + printk("%s() tvp.cmd = 0x%08x (%s)\n" + ,__FUNCTION__ + ,tvp->cmd + ,tv_cmds[ tvp->cmd ].name); + + if(tv_cmds[ tvp->cmd ].buffer) { + + printk("%s() tvp.u.buffer.len = 0x%02x\n" + ,__FUNCTION__ + ,tvp->u.buffer.len); + + for(i = 0; i < tvp->u.buffer.len; i++) + printk("%s() tvp.u.buffer.data[0x%02x] = 0x%02x\n" + ,__FUNCTION__ + ,i + ,tvp->u.buffer.data[i]); + + } else + printk("%s() tvp.u.data = 0x%08x\n", __FUNCTION__, tvp->u.data); +} + +int is_legacy_delivery_system(fe_delivery_system_t s) +{ + if((s == SYS_UNDEFINED) || (s == SYS_DVBC_ANNEX_AC) || + (s == SYS_DVBC_ANNEX_B) || (s == SYS_DVBT) || (s == SYS_DVBS)) + return 1; + + return 0; +} + +int tv_property_cache_submit(struct dvb_frontend *fe) +{ + + /* We have to do one of two things: + * To support legacy devices using the new API we take values from + * the tv_cache and generate a legacy truning structure. + * + * Or, + * + * To support advanced tuning devices with the new API we + * notify the new advance driver type that a tuning operation is required + * and let it pull values from the cache as is, we don't need to + * pass structures. + * + * We'll use the modulation type to assess how this is handled. as the API + * progresses we'll probably want to have a flag in dvb_frontend_ops + * to allow the frontend driver to dictate how it likes to be tuned. + * + * Because of how this is attached to the ioctl handler for legacy support, + * it's important to return an appropriate result code with atleast the following + * three meanings: + * < 0 = processing error + * 0 = lecagy ioctl handler to submit a traditional set_frontend() call. + * 1 = lecagy ioctl handler should NOT submit a traditional set_frontend() call. + */ + + int r; + + struct tv_frontend_properties *c = &fe->tv_property_cache; + struct dvb_frontend_private *fepriv = fe->frontend_priv; + struct dvb_frontend_parameters p; + + printk("%s()\n", __FUNCTION__); + + /* For legacy delivery systems we don't need the delivery_system to be specified */ + if(is_legacy_delivery_system(c->delivery_system)) { + switch(c->modulation) { + case QPSK: + printk("%s() Preparing QPSK req\n", __FUNCTION__); + p.frequency = c->frequency; + p.inversion = c->inversion; + p.u.qpsk.symbol_rate = c->symbol_rate; + p.u.qpsk.fec_inner = c->fec_inner; + memcpy(&fepriv->parameters, &p, + sizeof (struct dvb_frontend_parameters)); + + /* Call the traditional tuning mechanisms. */ + + r = 0; + break; + case QAM_16: + case QAM_32: + case QAM_64: + case QAM_128: + case QAM_256: + case QAM_AUTO: + printk("%s() Preparing QAM req\n", __FUNCTION__); + p.frequency = c->frequency; + p.inversion = c->inversion; + p.u.qam.symbol_rate = c->symbol_rate; + p.u.vsb.modulation = c->modulation; + printk("%s() frequency = %d\n", __FUNCTION__, p.frequency); + printk("%s() QAM = %d\n", __FUNCTION__, p.u.vsb.modulation); + memcpy(&fepriv->parameters, &p, + sizeof (struct dvb_frontend_parameters)); + + /* At this point we're fully formed for backwards + * compatability and we need to return this + * via the ioctl handler as SET_FRONTEND (arg). + * We've already patched the new values into the + * frontends tuning structures so the ioctl code just + * continues as if a legacy tune structure was passed + * from userspace. + */ + + r = 0; + break; + case VSB_8: + case VSB_16: + printk("%s() Preparing VSB req\n", __FUNCTION__); + p.frequency = c->frequency; + p.u.vsb.modulation = c->modulation; + memcpy(&fepriv->parameters, &p, + sizeof (struct dvb_frontend_parameters)); + + /* Call the traditional tuning mechanisms. */ + + r = 0; + break; + /* TODO: Add any missing modulation types */ + default: + r = -1; + } + } else { + /* For advanced delivery systems / modulation types ... + * we seed the lecacy dvb_frontend_parameters structure + * so that the sanity checking code later in the IOCTL processing + * can validate our basic frequency ranges, symbolrates, modulation + * etc. + */ + r = -1; + + switch(c->modulation) { + case _8PSK: + case _16APSK: + case NBC_QPSK: + /* Just post a notification to the demod driver and let it pull + * the specific values it wants from its tv_property_cache. + * It can decide how best to use those parameters. + * IOCTL will call set_frontend (by default) due to zigzag + * support etc. + */ + if (fe->ops.set_params) + r = fe->ops.set_params(fe); + + p.frequency = c->frequency; + p.inversion = c->inversion; + p.u.qpsk.symbol_rate = c->symbol_rate; + p.u.qpsk.fec_inner = c->fec_inner; + memcpy(&fepriv->parameters, &p, + sizeof (struct dvb_frontend_parameters)); + + r = 0; + break; + default: + r = -1; + } + + if(c->delivery_system == SYS_ISDBT) { + /* Fake out a generic DVB-T request so we pass validation in the ioctl */ + p.frequency = c->frequency; + p.inversion = INVERSION_AUTO; + p.u.ofdm.constellation = QAM_AUTO; + p.u.ofdm.code_rate_HP = FEC_AUTO; + p.u.ofdm.code_rate_LP = FEC_AUTO; + p.u.ofdm.bandwidth = BANDWIDTH_AUTO; + p.u.ofdm.transmission_mode = TRANSMISSION_MODE_AUTO; + p.u.ofdm.guard_interval = GUARD_INTERVAL_AUTO; + p.u.ofdm.hierarchy_information = HIERARCHY_AUTO; + memcpy(&fepriv->parameters, &p, + sizeof (struct dvb_frontend_parameters)); + + r = 0; + } + } + return r; +} + +int tv_property_process(struct dvb_frontend *fe, tv_property_t *tvp) +{ + int r = 0; + printk("%s()\n", __FUNCTION__); + tv_property_dump(tvp); + + switch(tvp->cmd) { + case TV_SEQ_START: + case TV_SEQ_TERMINATE: + /* Reset a cache of data specific to the frontend here. This does + * not effect hardware. + */ + printk("%s() Flushing property cache\n", __FUNCTION__); + memset(&fe->tv_property_cache, 0, sizeof(struct tv_frontend_properties)); + fe->tv_property_cache.state = TV_SEQ_START; + fe->tv_property_cache.delivery_system = SYS_UNDEFINED; + break; + case TV_SEQ_COMPLETE: + /* interpret the cache of data, build either a traditional frontend + * tunerequest and submit it to a subset of the ioctl handler, + * or, call a new undefined method on the frontend to deal with + * all new tune requests. + */ + fe->tv_property_cache.state = TV_SEQ_COMPLETE; + printk("%s() Finalised property cache\n", __FUNCTION__); + r = tv_property_cache_submit(fe); + break; + case TV_SET_FREQUENCY: + fe->tv_property_cache.frequency = tvp->u.data; + break; + case TV_GET_FREQUENCY: + tvp->u.data = fe->tv_property_cache.frequency; + break; + case TV_SET_MODULATION: + fe->tv_property_cache.modulation = tvp->u.data; + break; + case TV_GET_MODULATION: + tvp->u.data = fe->tv_property_cache.modulation; + break; + case TV_SET_BANDWIDTH: + fe->tv_property_cache.bandwidth = tvp->u.data; + break; + case TV_GET_BANDWIDTH: + tvp->u.data = fe->tv_property_cache.bandwidth; + break; + case TV_SET_INVERSION: + fe->tv_property_cache.inversion = tvp->u.data; + break; + case TV_GET_INVERSION: + tvp->u.data = fe->tv_property_cache.inversion; + break; + case TV_SET_SYMBOLRATE: + fe->tv_property_cache.symbol_rate = tvp->u.data; + break; + case TV_GET_SYMBOLRATE: + tvp->u.data = fe->tv_property_cache.symbol_rate; + break; + case TV_SET_INNERFEC: + fe->tv_property_cache.fec_inner = tvp->u.data; + break; + case TV_GET_INNERFEC: + tvp->u.data = fe->tv_property_cache.fec_inner; + break; + case TV_SET_PILOT: + fe->tv_property_cache.pilot = tvp->u.data; + break; + case TV_GET_PILOT: + tvp->u.data = fe->tv_property_cache.pilot; + break; + case TV_SET_ROLLOFF: + fe->tv_property_cache.rolloff = tvp->u.data; + break; + case TV_GET_ROLLOFF: + tvp->u.data = fe->tv_property_cache.rolloff; + break; + case TV_SET_DELIVERY_SYSTEM: + fe->tv_property_cache.delivery_system = tvp->u.data; + break; + case TV_GET_DELIVERY_SYSTEM: + tvp->u.data = fe->tv_property_cache.delivery_system; + break; + + /* ISDB-T Support here */ + case TV_SET_ISDB_SEGMENT_NUM: + fe->tv_property_cache.isdb_segment_num = tvp->u.data; + break; + case TV_GET_ISDB_SEGMENT_NUM: + tvp->u.data = fe->tv_property_cache.isdb_segment_num; + break; + case TV_SET_ISDB_SEGMENT_WIDTH: + fe->tv_property_cache.isdb_segment_width = tvp->u.data; + break; + case TV_GET_ISDB_SEGMENT_WIDTH: + tvp->u.data = fe->tv_property_cache.isdb_segment_width; + break; + case TV_GET_ISDB_LAYERA_FEC: + tvp->u.data = fe->tv_property_cache.isdb_layera_fec; + break; + case TV_GET_ISDB_LAYERA_MODULATION: + tvp->u.data = fe->tv_property_cache.isdb_layera_modulation; + break; + case TV_GET_ISDB_LAYERA_SEGMENT_WIDTH: + tvp->u.data = fe->tv_property_cache.isdb_layera_segment_width; + break; + case TV_GET_ISDB_LAYERB_FEC: + tvp->u.data = fe->tv_property_cache.isdb_layerb_fec; + break; + case TV_GET_ISDB_LAYERB_MODULATION: + tvp->u.data = fe->tv_property_cache.isdb_layerb_modulation; + break; + case TV_GET_ISDB_LAYERB_SEGMENT_WIDTH: + tvp->u.data = fe->tv_property_cache.isdb_layerb_segment_width; + break; + case TV_GET_ISDB_LAYERC_FEC: + tvp->u.data = fe->tv_property_cache.isdb_layerc_fec; + break; + case TV_GET_ISDB_LAYERC_MODULATION: + tvp->u.data = fe->tv_property_cache.isdb_layerc_modulation; + break; + case TV_GET_ISDB_LAYERC_SEGMENT_WIDTH: + tvp->u.data = fe->tv_property_cache.isdb_layerc_segment_width; + break; + + } + + return 0; +} + static int dvb_frontend_ioctl(struct inode *inode, struct file *file, unsigned int cmd, void *parg) { @@ -762,6 +1291,7 @@ static int dvb_frontend_ioctl(struct inode *inode, struct file *file, struct dvb_frontend *fe = dvbdev->priv; struct dvb_frontend_private *fepriv = fe->frontend_priv; int err = -EOPNOTSUPP; + tv_property_t* tvp; dprintk ("%s\n", __func__); @@ -776,6 +1306,27 @@ static int dvb_frontend_ioctl(struct inode *inode, struct file *file, if (down_interruptible (&fepriv->sem)) return -ERESTARTSYS; + if(cmd == FE_SET_PROPERTY) { + printk("%s() FE_SET_PROPERTY\n", __FUNCTION__); + + /* TODO: basic property validation here */ + + /* TODO: ioctl userdata out of range check here */ + tvp = parg; + while(tvp->cmd != TV_SEQ_UNDEFINED) { + tv_property_process(fe, tvp); + if( (tvp->cmd == TV_SEQ_TERMINATE) || (tvp->cmd == TV_SEQ_COMPLETE) ) + break; + tvp++; + } + + if(fe->tv_property_cache.state == TV_SEQ_COMPLETE) { + printk("%s() Property cache is full, tuning\n", __FUNCTION__); + cmd = FE_SET_FRONTEND; + } + err = 0; + } + switch (cmd) { case FE_GET_INFO: { struct dvb_frontend_info* info = parg; @@ -942,13 +1493,20 @@ static int dvb_frontend_ioctl(struct inode *inode, struct file *file, case FE_SET_FRONTEND: { struct dvb_frontend_tune_settings fetunesettings; - if (dvb_frontend_check_parameters(fe, parg) < 0) { - err = -EINVAL; - break; - } + if(fe->tv_property_cache.state == TV_SEQ_COMPLETE) { + if (dvb_frontend_check_parameters(fe, &fepriv->parameters) < 0) { + err = -EINVAL; + break; + } + } else { + if (dvb_frontend_check_parameters(fe, parg) < 0) { + err = -EINVAL; + break; + } - memcpy (&fepriv->parameters, parg, - sizeof (struct dvb_frontend_parameters)); + memcpy (&fepriv->parameters, parg, + sizeof (struct dvb_frontend_parameters)); + } memset(&fetunesettings, 0, sizeof(struct dvb_frontend_tune_settings)); memcpy(&fetunesettings.parameters, parg, @@ -1031,6 +1589,7 @@ static int dvb_frontend_ioctl(struct inode *inode, struct file *file, return err; } + static unsigned int dvb_frontend_poll(struct file *file, struct poll_table_struct *wait) { struct dvb_device *dvbdev = file->private_data; diff --git a/drivers/media/dvb/dvb-core/dvb_frontend.h b/drivers/media/dvb/dvb-core/dvb_frontend.h index aa4133f..61d53ee 100644 --- a/drivers/media/dvb/dvb-core/dvb_frontend.h +++ b/drivers/media/dvb/dvb-core/dvb_frontend.h @@ -169,6 +169,10 @@ struct dvb_frontend_ops { struct dvb_tuner_ops tuner_ops; struct analog_demod_ops analog_ops; + + int (*set_property)(struct dvb_frontend* fe, tv_property_t* tvp); + int (*get_property)(struct dvb_frontend* fe, tv_property_t* tvp); + int (*set_params)(struct dvb_frontend* fe); }; #define MAX_EVENT 8 @@ -182,6 +186,45 @@ struct dvb_fe_events { struct mutex mtx; }; +struct tv_frontend_properties { + + /* Cache State */ + u32 state; + + u32 frequency; + fe_modulation_t modulation; + + fe_sec_voltage_t voltage; + fe_sec_tone_mode_t sectone; + fe_spectral_inversion_t inversion; + fe_code_rate_t fec_inner; + fe_transmit_mode_t transmission_mode; + fe_bandwidth_t bandwidth; + fe_guard_interval_t guard_interval; + fe_hierarchy_t hierarchy; + u32 symbol_rate; + fe_code_rate_t code_rate_HP; + fe_code_rate_t code_rate_LP; + + fe_pilot_t pilot; + fe_rolloff_t rolloff; + + fe_delivery_system_t delivery_system; + + /* ISDB-T specifics */ + u32 isdb_segment_num; + u32 isdb_segment_width; + fe_code_rate_t isdb_layera_fec; + fe_modulation_t isdb_layera_modulation; + u32 isdb_layera_segment_width; + fe_code_rate_t isdb_layerb_fec; + fe_modulation_t isdb_layerb_modulation; + u32 isdb_layerb_segment_width; + fe_code_rate_t isdb_layerc_fec; + fe_modulation_t isdb_layerc_modulation; + u32 isdb_layerc_segment_width; +}; + struct dvb_frontend { struct dvb_frontend_ops ops; struct dvb_adapter *dvb; @@ -190,6 +233,7 @@ struct dvb_frontend { void *frontend_priv; void *sec_priv; void *analog_demod_priv; + struct tv_frontend_properties tv_property_cache; }; extern int dvb_register_frontend(struct dvb_adapter *dvb, diff --git a/include/linux/dvb/frontend.h b/include/linux/dvb/frontend.h index c8cbd90..4d37700 100644 --- a/include/linux/dvb/frontend.h +++ b/include/linux/dvb/frontend.h @@ -62,6 +62,7 @@ typedef enum fe_caps { FE_CAN_HIERARCHY_AUTO = 0x100000, FE_CAN_8VSB = 0x200000, FE_CAN_16VSB = 0x400000, + FE_HAS_EXTENDED_CAPS = 0x800000, // We need more bitspace for newer APIs, indicate this. FE_NEEDS_BENDING = 0x20000000, // not supported anymore, don't use (frontend requires frequency bending) FE_CAN_RECOVER = 0x40000000, // frontend can recover from a cable unplug automatically FE_CAN_MUTE_TS = 0x80000000 // frontend can stop spurious TS data output @@ -147,7 +148,9 @@ typedef enum fe_code_rate { FEC_6_7, FEC_7_8, FEC_8_9, - FEC_AUTO + FEC_AUTO, + FEC_3_5, + FEC_9_10, } fe_code_rate_t; @@ -160,7 +163,11 @@ typedef enum fe_modulation { QAM_256, QAM_AUTO, VSB_8, - VSB_16 + VSB_16, + _8PSK, + _16APSK, + NBC_QPSK, + DQPSK, } fe_modulation_t; typedef enum fe_transmit_mode { @@ -239,6 +246,125 @@ struct dvb_frontend_event { struct dvb_frontend_parameters parameters; }; +/* TODO: Turn this into a series of defines, so future maintainers + * don't insert random new commands and break backwards + * binary compatability. + */ +typedef enum tv_cmd_types { + TV_SEQ_UNDEFINED, + TV_SEQ_START, + TV_SEQ_CONTINUE, + TV_SEQ_COMPLETE, + TV_SEQ_TERMINATE, + + TV_SET_FREQUENCY, + TV_SET_MODULATION, + TV_SET_BANDWIDTH, + TV_SET_INVERSION, + TV_SET_DISEQC_MASTER, + TV_SET_SYMBOLRATE, + TV_SET_INNERFEC, + TV_SET_VOLTAGE, + TV_SET_TONE, + TV_SET_PILOT, + TV_SET_ROLLOFF, + + TV_GET_FREQUENCY, + TV_GET_MODULATION, + TV_GET_BANDWIDTH, + TV_GET_INVERSION, + TV_GET_DISEQC_SLAVE_REPLY, + TV_GET_SYMBOLRATE, + TV_GET_INNERFEC, + TV_GET_VOLTAGE, + TV_GET_TONE, + TV_GET_PILOT, + TV_GET_ROLLOFF, + + /* Basic enumeration set for querying unlimited capabilities */ + TV_GET_FE_CAPABILITY_COUNT, + TV_GET_FE_CAPABILITY, + + /* New commands are always appended */ + TV_SET_DELIVERY_SYSTEM, + TV_GET_DELIVERY_SYSTEM, + + /* ISDB-T */ + TV_SET_ISDB_SEGMENT_NUM, + TV_GET_ISDB_SEGMENT_NUM, + TV_SET_ISDB_SEGMENT_WIDTH, + TV_GET_ISDB_SEGMENT_WIDTH, + TV_GET_ISDB_LAYERA_FEC, + TV_GET_ISDB_LAYERA_MODULATION, + TV_GET_ISDB_LAYERA_SEGMENT_WIDTH, + TV_GET_ISDB_LAYERB_FEC, + TV_GET_ISDB_LAYERB_MODULATION, + TV_GET_ISDB_LAYERB_SEGMENT_WIDTH, + TV_GET_ISDB_LAYERC_FEC, + TV_GET_ISDB_LAYERC_MODULATION, + TV_GET_ISDB_LAYERC_SEGMENT_WIDTH, + +} tv_cmd_types_t; + +typedef enum fe_pilot { + PILOT_ON, + PILOT_OFF, + PILOT_AUTO, +} fe_pilot_t; + +typedef enum fe_rolloff { + ROLLOFF_20, + ROLLOFF_25, + ROLLOFF_35, + ROLLOFF_AUTO, +} fe_rolloff_t; + +typedef enum fe_delivery_system { + SYS_UNDEFINED, + SYS_DVBC_ANNEX_AC, + SYS_DVBC_ANNEX_B, + SYS_DVBT, + SYS_DVBS, + SYS_DVBS2, + SYS_DVBH, + SYS_ISDBT, + SYS_ISDBS, + SYS_ISDBC, + SYS_ATSC, + SYS_ATSCMH, + SYS_DMBTH, + SYS_CMMB, + SYS_DAB, +} fe_delivery_system_t; + +struct tv_cmds_h { + char *name; /* A display name for debugging purposes */ + + __u32 cmd; /* A unique ID */ + + /* Flags */ + __u32 set:1; /* Either a set or get property */ + __u32 buffer:1; /* Does this property use the buffer? */ + __u32 reserved:30; /* Align */ +}; + +typedef struct { + __u32 cmd; + union { + __u32 data; + struct { + __u8 data[32]; + __u32 len; + } buffer; + } u; +} tv_property_t; + +/* No more than 16 properties during any given ioctl */ +typedef tv_property_t tv_properties_t[16]; + +#define FE_SET_PROPERTY _IOW('o', 82, tv_properties_t) +#define FE_GET_PROPERTY _IOR('o', 83, tv_properties_t) + /** * When set, this flag will disable any zigzagging or other "normal" tuning -- cgit v0.10.2 From 0d46748c3f874defbbbf98bcf40c7b18964abbc0 Mon Sep 17 00:00:00 2001 From: Steven Toth Date: Thu, 4 Sep 2008 01:14:43 -0300 Subject: V4L/DVB (8986): cx24116: Adding DVB-S2 demodulator support Adds support for the COnexant cx24116 DVB-S2 demodulator. TODO: checkpatch cleanup. Signed-off-by: Steven Toth Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/dvb/frontends/Kconfig b/drivers/media/dvb/frontends/Kconfig index 097d9f0..d2f31da 100644 --- a/drivers/media/dvb/frontends/Kconfig +++ b/drivers/media/dvb/frontends/Kconfig @@ -92,6 +92,13 @@ config DVB_TUA6100 help A DVB-S PLL chip. +config DVB_CX24116 + tristate "Conexant CX24116 based" + depends on DVB_CORE && I2C + default m if DVB_FE_CUSTOMISE + help + A DVB-S/S2 tuner module. Say Y when you want to support this frontend. + comment "DVB-T (terrestrial) frontends" depends on DVB_CORE diff --git a/drivers/media/dvb/frontends/Makefile b/drivers/media/dvb/frontends/Makefile index 1b54788..5deb8a5 100644 --- a/drivers/media/dvb/frontends/Makefile +++ b/drivers/media/dvb/frontends/Makefile @@ -51,3 +51,4 @@ obj-$(CONFIG_DVB_S5H1411) += s5h1411.o obj-$(CONFIG_DVB_LGS8GL5) += lgs8gl5.o obj-$(CONFIG_DVB_DUMMY_FE) += dvb_dummy_fe.o obj-$(CONFIG_DVB_AF9013) += af9013.o +obj-$(CONFIG_DVB_CX24116) += cx24116.o diff --git a/drivers/media/dvb/frontends/cx24116.c b/drivers/media/dvb/frontends/cx24116.c new file mode 100644 index 0000000..1402086 --- /dev/null +++ b/drivers/media/dvb/frontends/cx24116.c @@ -0,0 +1,950 @@ +/* + Conexant cx24116/cx24118 - DVBS/S2 Satellite demod/tuner driver + + Copyright (C) 2006-2008 Steven Toth + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +/* + * Updates by Darron Broad 2007. + * + * March + * Fixed some bugs. + * Added diseqc support. + * Added corrected signal strength support. + * + * August + * Sync with legacy version. + * Some clean ups. + */ + +#include +#include +#include +#include +#include +#include + +#include "dvb_frontend.h" +#include "cx24116.h" + +/* + * Fetch firmware in the following manner. + * + * #!/bin/sh + * wget ftp://167.206.143.11/outgoing/Oxford/88x_2_117_24275_1_INF.zip + * unzip 88x_2_117_24275_1_INF.zip + * dd if=Driver88/hcw88bda.sys of=dvb-fe-cx24116.fw skip=81768 bs=1 count=32522 + */ +#define CX24116_DEFAULT_FIRMWARE "dvb-fe-cx24116.fw" +#define CX24116_SEARCH_RANGE_KHZ 5000 + +/* registers (TO BE COMPLETED) */ +#define CX24116_REG_SIGNAL (0xd5) + +/* arg buffer size */ +#define CX24116_ARGLEN (0x1e) + +/* arg offset for DiSEqC */ +#define CX24116_DISEQC_BURST (1) +#define CX24116_DISEQC_ARG2_2 (2) /* unknown value=2 */ +#define CX24116_DISEQC_ARG3_0 (3) /* unknown value=0 */ +#define CX24116_DISEQC_ARG4_0 (4) /* unknown value=0 */ +#define CX24116_DISEQC_MSGLEN (5) +#define CX24116_DISEQC_MSGOFS (6) + +/* DiSEqC burst */ +#define CX24116_DISEQC_MINI_A (0) +#define CX24116_DISEQC_MINI_B (1) + +static int debug = 0; +#define dprintk(args...) \ + do { \ + if (debug) printk ("cx24116: " args); \ + } while (0) + +enum cmds +{ + CMD_INIT_CMD10 = 0x10, + CMD_TUNEREQUEST = 0x11, + CMD_INIT_CMD13 = 0x13, + CMD_INIT_CMD14 = 0x14, + CMD_SEND_DISEQC = 0x21, + CMD_SET_TONEPRE = 0x22, + CMD_SET_TONE = 0x23, +}; + +/* The Demod/Tuner can't easily provide these, we cache them */ +struct cx24116_tuning +{ + u32 frequency; + u32 symbol_rate; + fe_spectral_inversion_t inversion; + fe_code_rate_t fec; + + fe_modulation_t modulation; + + /* Demod values */ + u8 fec_val; + u8 fec_mask; + u8 inversion_val; +}; + +/* Basic commands that are sent to the firmware */ +struct cx24116_cmd +{ + u8 len; + u8 args[CX24116_ARGLEN]; +}; + +struct cx24116_state +{ + struct i2c_adapter* i2c; + const struct cx24116_config* config; + + struct dvb_frontend frontend; + + struct cx24116_tuning dcur; + struct cx24116_tuning dnxt; + + u8 skip_fw_load; + u8 burst; +}; + +static int cx24116_writereg(struct cx24116_state* state, int reg, int data) +{ + u8 buf[] = { reg, data }; + struct i2c_msg msg = { .addr = state->config->demod_address, + .flags = 0, .buf = buf, .len = 2 }; + int err; + + if (debug>1) + printk("cx24116: %s: write reg 0x%02x, value 0x%02x\n", + __func__,reg, data); + + if ((err = i2c_transfer(state->i2c, &msg, 1)) != 1) { + printk("%s: writereg error(err == %i, reg == 0x%02x," + " value == 0x%02x)\n", __func__, err, reg, data); + return -EREMOTEIO; + } + + return 0; +} + +/* Bulk byte writes to a single I2C address, for 32k firmware load */ +static int cx24116_writeregN(struct cx24116_state* state, int reg, u8 *data, u16 len) +{ + int ret = -EREMOTEIO; + struct i2c_msg msg; + u8 *buf; + + buf = kmalloc(len + 1, GFP_KERNEL); + if (buf == NULL) { + printk("Unable to kmalloc\n"); + ret = -ENOMEM; + goto error; + } + + *(buf) = reg; + memcpy(buf + 1, data, len); + + msg.addr = state->config->demod_address; + msg.flags = 0; + msg.buf = buf; + msg.len = len + 1; + + if (debug>1) + printk("cx24116: %s: write regN 0x%02x, len = %d\n", + __func__,reg, len); + + if ((ret = i2c_transfer(state->i2c, &msg, 1)) != 1) { + printk("%s: writereg error(err == %i, reg == 0x%02x\n", + __func__, ret, reg); + ret = -EREMOTEIO; + } + +error: + kfree(buf); + + return ret; +} + +static int cx24116_readreg(struct cx24116_state* state, u8 reg) +{ + int ret; + u8 b0[] = { reg }; + u8 b1[] = { 0 }; + struct i2c_msg msg[] = { + { .addr = state->config->demod_address, .flags = 0, .buf = b0, .len = 1 }, + { .addr = state->config->demod_address, .flags = I2C_M_RD, .buf = b1, .len = 1 } + }; + + ret = i2c_transfer(state->i2c, msg, 2); + + if (ret != 2) { + printk("%s: reg=0x%x (error=%d)\n", __func__, reg, ret); + return ret; + } + + if (debug>1) + printk("cx24116: read reg 0x%02x, value 0x%02x\n",reg, b1[0]); + + return b1[0]; +} + +static int cx24116_set_inversion(struct cx24116_state* state, fe_spectral_inversion_t inversion) +{ + dprintk("%s(%d)\n", __func__, inversion); + + switch (inversion) { + case INVERSION_OFF: + state->dnxt.inversion_val = 0x00; + break; + case INVERSION_ON: + state->dnxt.inversion_val = 0x04; + break; + case INVERSION_AUTO: + state->dnxt.inversion_val = 0x0C; + break; + default: + return -EINVAL; + } + + state->dnxt.inversion = inversion; + + return 0; +} + +/* A table of modulation, fec and configuration bytes for the demod. + * Not all S2 mmodulation schemes are support and not all rates with + * a scheme are support. Especially, no auto detect when in S2 mode. + */ +struct cx24116_modfec { + fe_modulation_t modulation; + fe_code_rate_t fec; + u8 mask; /* In DVBS mode this is used to autodetect */ + u8 val; /* Passed to the firmware to indicate mode selection */ +} CX24116_MODFEC_MODES[] = { + /* QPSK. For unknown rates we set hardware to auto detect 0xfe 0x30 */ + { QPSK, FEC_NONE, 0xfe, 0x30 }, + { QPSK, FEC_1_2, 0x02, 0x2e }, + { QPSK, FEC_2_3, 0x04, 0x2f }, + { QPSK, FEC_3_4, 0x08, 0x30 }, + { QPSK, FEC_4_5, 0xfe, 0x30 }, + { QPSK, FEC_5_6, 0x20, 0x31 }, + { QPSK, FEC_6_7, 0xfe, 0x30 }, + { QPSK, FEC_7_8, 0x80, 0x32 }, + { QPSK, FEC_8_9, 0xfe, 0x30 }, + { QPSK, FEC_AUTO, 0xfe, 0x30 }, + /* NBC-QPSK */ + { NBC_QPSK, FEC_1_2, 0x00, 0x04 }, + { NBC_QPSK, FEC_3_5, 0x00, 0x05 }, + { NBC_QPSK, FEC_2_3, 0x00, 0x06 }, + { NBC_QPSK, FEC_3_4, 0x00, 0x07 }, + { NBC_QPSK, FEC_4_5, 0x00, 0x08 }, + { NBC_QPSK, FEC_5_6, 0x00, 0x09 }, + { NBC_QPSK, FEC_8_9, 0x00, 0x0a }, + { NBC_QPSK, FEC_9_10, 0x00, 0x0b }, + /* 8PSK */ + { _8PSK, FEC_3_5, 0x00, 0x0c }, + { _8PSK, FEC_2_3, 0x00, 0x0d }, + { _8PSK, FEC_3_4, 0x00, 0x0e }, + { _8PSK, FEC_5_6, 0x00, 0x0f }, + { _8PSK, FEC_9_10, 0x00, 0x11 }, +}; + +static int cx24116_lookup_fecmod(struct cx24116_state* state, + fe_modulation_t m, fe_code_rate_t f) +{ + int i, ret = -EOPNOTSUPP; + + for(i=0 ; i < sizeof(CX24116_MODFEC_MODES) / sizeof(struct cx24116_modfec) ; i++) + { + if( (m == CX24116_MODFEC_MODES[i].modulation) && + (f == CX24116_MODFEC_MODES[i].fec) ) + { + ret = i; + break; + } + } + + return ret; +} + +static int cx24116_set_fec(struct cx24116_state* state, fe_modulation_t mod, fe_code_rate_t fec) +{ + int ret = 0; + dprintk("%s()\n", __func__); + + ret = cx24116_lookup_fecmod(state, mod, fec); + + if(ret < 0) + return ret; + + state->dnxt.fec_val = CX24116_MODFEC_MODES[ret].val; + state->dnxt.fec_mask = CX24116_MODFEC_MODES[ret].mask; + dprintk("%s() fec_val/mask = 0x%02x/0x%02x\n", __func__, + state->dnxt.fec_val, state->dnxt.fec_mask); + + return 0; +} + +static int cx24116_set_symbolrate(struct cx24116_state* state, u32 rate) +{ + int ret = 0; + + dprintk("%s()\n", __func__); + + state->dnxt.symbol_rate = rate; + + dprintk("%s() symbol_rate = %d\n", __func__, state->dnxt.symbol_rate); + + /* check if symbol rate is within limits */ + if ((state->dnxt.symbol_rate > state->frontend.ops.info.symbol_rate_max) || + (state->dnxt.symbol_rate < state->frontend.ops.info.symbol_rate_min)) + ret = -EOPNOTSUPP; + + return ret; +} + +static int cx24116_load_firmware (struct dvb_frontend* fe, const struct firmware *fw); + +static int cx24116_firmware_ondemand(struct dvb_frontend* fe) +{ + struct cx24116_state *state = fe->demodulator_priv; + const struct firmware *fw; + int ret = 0; + + dprintk("%s()\n",__func__); + + if (cx24116_readreg(state, 0x20) > 0) + { + + if (state->skip_fw_load) + return 0; + + /* Load firmware */ + /* request the firmware, this will block until someone uploads it */ + printk("%s: Waiting for firmware upload (%s)...\n", __func__, CX24116_DEFAULT_FIRMWARE); + ret = request_firmware(&fw, CX24116_DEFAULT_FIRMWARE, &state->i2c->dev); + printk("%s: Waiting for firmware upload(2)...\n", __func__); + if (ret) { + printk("%s: No firmware uploaded (timeout or file not found?)\n", __func__); + return ret; + } + + /* Make sure we don't recurse back through here during loading */ + state->skip_fw_load = 1; + + ret = cx24116_load_firmware(fe, fw); + if (ret) + printk("%s: Writing firmware to device failed\n", __func__); + + release_firmware(fw); + + printk("%s: Firmware upload %s\n", __func__, ret == 0 ? "complete" : "failed"); + + /* Ensure firmware is always loaded if required */ + state->skip_fw_load = 0; + } + + return ret; +} + +/* Take a basic firmware command structure, format it and forward it for processing */ +static int cx24116_cmd_execute(struct dvb_frontend* fe, struct cx24116_cmd *cmd) +{ + struct cx24116_state *state = fe->demodulator_priv; + int i, ret; + + dprintk("%s()\n", __func__); + + /* Load the firmware if required */ + if ( (ret = cx24116_firmware_ondemand(fe)) != 0) + { + printk("%s(): Unable initialise the firmware\n", __func__); + return ret; + } + + /* Write the command */ + for(i = 0; i < cmd->len ; i++) + { + dprintk("%s: 0x%02x == 0x%02x\n", __func__, i, cmd->args[i]); + cx24116_writereg(state, i, cmd->args[i]); + } + + /* Start execution and wait for cmd to terminate */ + cx24116_writereg(state, 0x1f, 0x01); + while( cx24116_readreg(state, 0x1f) ) + { + msleep(10); + if(i++ > 64) + { + /* Avoid looping forever if the firmware does no respond */ + printk("%s() Firmware not responding\n", __func__); + return -EREMOTEIO; + } + } + return 0; +} + +static int cx24116_load_firmware (struct dvb_frontend* fe, const struct firmware *fw) +{ + struct cx24116_state* state = fe->demodulator_priv; + struct cx24116_cmd cmd; + int ret; + + dprintk("%s\n", __func__); + dprintk("Firmware is %zu bytes (%02x %02x .. %02x %02x)\n" + ,fw->size + ,fw->data[0] + ,fw->data[1] + ,fw->data[ fw->size-2 ] + ,fw->data[ fw->size-1 ] + ); + + /* Toggle 88x SRST pin to reset demod */ + if (state->config->reset_device) + state->config->reset_device(fe); + + /* Begin the firmware load process */ + /* Prepare the demod, load the firmware, cleanup after load */ + cx24116_writereg(state, 0xF1, 0x08); + cx24116_writereg(state, 0xF2, cx24116_readreg(state, 0xF2) | 0x03); + cx24116_writereg(state, 0xF3, 0x46); + cx24116_writereg(state, 0xF9, 0x00); + + cx24116_writereg(state, 0xF0, 0x03); + cx24116_writereg(state, 0xF4, 0x81); + cx24116_writereg(state, 0xF5, 0x00); + cx24116_writereg(state, 0xF6, 0x00); + + /* write the entire firmware as one transaction */ + cx24116_writeregN(state, 0xF7, fw->data, fw->size); + + cx24116_writereg(state, 0xF4, 0x10); + cx24116_writereg(state, 0xF0, 0x00); + cx24116_writereg(state, 0xF8, 0x06); + + /* Firmware CMD 10: Chip config? */ + cmd.args[0x00] = CMD_INIT_CMD10; + cmd.args[0x01] = 0x05; + cmd.args[0x02] = 0xdc; + cmd.args[0x03] = 0xda; + cmd.args[0x04] = 0xae; + cmd.args[0x05] = 0xaa; + cmd.args[0x06] = 0x04; + cmd.args[0x07] = 0x9d; + cmd.args[0x08] = 0xfc; + cmd.args[0x09] = 0x06; + cmd.len= 0x0a; + ret = cx24116_cmd_execute(fe, &cmd); + if (ret != 0) + return ret; + + cx24116_writereg(state, 0x9d, 0x00); + + /* Firmware CMD 14: Unknown */ + cmd.args[0x00] = CMD_INIT_CMD14; + cmd.args[0x01] = 0x00; + cmd.args[0x02] = 0x00; + cmd.len= 0x03; + ret = cx24116_cmd_execute(fe, &cmd); + if (ret != 0) + return ret; + + cx24116_writereg(state, 0xe5, 0x00); + + /* Firmware CMD 13: Unknown - Firmware config? */ + cmd.args[0x00] = CMD_INIT_CMD13; + cmd.args[0x01] = 0x01; + cmd.args[0x02] = 0x75; + cmd.args[0x03] = 0x00; + cmd.args[0x04] = 0x02; + cmd.args[0x05] = 0x00; + cmd.len= 0x06; + ret = cx24116_cmd_execute(fe, &cmd); + if (ret != 0) + return ret; + + return 0; +} + +static int cx24116_set_voltage(struct dvb_frontend* fe, fe_sec_voltage_t voltage) +{ + /* The isl6421 module will override this function in the fops. */ + dprintk("%s() This should never appear if the isl6421 module is loaded correctly\n",__func__); + + return -EOPNOTSUPP; +} + +static int cx24116_read_status(struct dvb_frontend* fe, fe_status_t* status) +{ + struct cx24116_state *state = fe->demodulator_priv; + + int lock = cx24116_readreg(state, 0x9d); + + dprintk("%s: status = 0x%02x\n", __func__, lock); + + *status = 0; + + if (lock & 0x01) + *status |= FE_HAS_SIGNAL; + if (lock & 0x02) + *status |= FE_HAS_CARRIER; + if (lock & 0x04) + *status |= FE_HAS_VITERBI; + if (lock & 0x08) + *status |= FE_HAS_SYNC | FE_HAS_LOCK; + + return 0; +} + +/* TODO: Not clear how we do this */ +static int cx24116_read_ber(struct dvb_frontend* fe, u32* ber) +{ + //struct cx24116_state *state = fe->demodulator_priv; + dprintk("%s()\n", __func__); + *ber = 0; + + return 0; +} + +/* Signal strength (0..100)% = (sig & 0xf0) * 10 + (sig & 0x0f) * 10 / 16 */ +static int cx24116_read_signal_strength(struct dvb_frontend* fe, u16* signal_strength) +{ + struct cx24116_state *state = fe->demodulator_priv; + u8 strength_reg; + static const u32 strength_tab[] = { /* 10 x Table (rounded up) */ + 0x00000,0x0199A,0x03333,0x04ccD,0x06667,0x08000,0x0999A,0x0b333,0x0cccD,0x0e667, + 0x10000,0x1199A,0x13333,0x14ccD,0x16667,0x18000 }; + + dprintk("%s()\n", __func__); + + strength_reg = cx24116_readreg(state, CX24116_REG_SIGNAL); + + if(strength_reg < 0xa0) + *signal_strength = strength_tab [ ( strength_reg & 0xf0 ) >> 4 ] + + ( strength_tab [ ( strength_reg & 0x0f ) ] >> 4 ); + else + *signal_strength = 0xffff; + + dprintk("%s: Signal strength (raw / cooked) = (0x%02x / 0x%04x)\n", + __func__,strength_reg,*signal_strength); + + return 0; +} + +/* TODO: Not clear how we do this */ +static int cx24116_read_snr(struct dvb_frontend* fe, u16* snr) +{ + //struct cx24116_state *state = fe->demodulator_priv; + dprintk("%s()\n", __func__); + *snr = 0; + + return 0; +} + +/* TODO: Not clear how we do this */ +static int cx24116_read_ucblocks(struct dvb_frontend* fe, u32* ucblocks) +{ + //struct cx24116_state *state = fe->demodulator_priv; + dprintk("%s()\n", __func__); + *ucblocks = 0; + + return 0; +} + +/* Overwrite the current tuning params, we are about to tune */ +static void cx24116_clone_params(struct dvb_frontend* fe) +{ + struct cx24116_state *state = fe->demodulator_priv; + memcpy(&state->dcur, &state->dnxt, sizeof(state->dcur)); +} + +static int cx24116_set_tone(struct dvb_frontend* fe, fe_sec_tone_mode_t tone) +{ + struct cx24116_cmd cmd; + int ret; + + dprintk("%s(%d)\n", __func__, tone); + if ( (tone != SEC_TONE_ON) && (tone != SEC_TONE_OFF) ) { + printk("%s: Invalid, tone=%d\n", __func__, tone); + return -EINVAL; + } + + /* This is always done before the tone is set */ + cmd.args[0x00] = CMD_SET_TONEPRE; + cmd.args[0x01] = 0x00; + cmd.len= 0x02; + ret = cx24116_cmd_execute(fe, &cmd); + if (ret != 0) + return ret; + + /* Now we set the tone */ + cmd.args[0x00] = CMD_SET_TONE; + cmd.args[0x01] = 0x00; + cmd.args[0x02] = 0x00; + + switch (tone) { + case SEC_TONE_ON: + dprintk("%s: setting tone on\n", __func__); + cmd.args[0x03] = 0x01; + break; + case SEC_TONE_OFF: + dprintk("%s: setting tone off\n",__func__); + cmd.args[0x03] = 0x00; + break; + } + cmd.len= 0x04; + + return cx24116_cmd_execute(fe, &cmd); +} + +/* Initialise DiSEqC */ +static int cx24116_diseqc_init(struct dvb_frontend* fe) +{ + struct cx24116_state *state = fe->demodulator_priv; + + /* Default DiSEqC burst state */ + state->burst = CX24116_DISEQC_MINI_A; + + return 0; +} + +/* Send DiSEqC message with derived burst (hack) || previous burst */ +static int cx24116_send_diseqc_msg(struct dvb_frontend* fe, struct dvb_diseqc_master_cmd *d) +{ + struct cx24116_state *state = fe->demodulator_priv; + struct cx24116_cmd cmd; + int i, ret; + + /* Dump DiSEqC message */ + if (debug) { + printk("cx24116: %s(", __func__); + for(i = 0 ; i < d->msg_len ;) { + printk("0x%02x", d->msg[i]); + if(++i < d->msg_len) + printk(", "); + } + printk(")\n"); + } + + if(d->msg_len > (CX24116_ARGLEN - CX24116_DISEQC_MSGOFS)) + return -EINVAL; + + cmd.args[0x00] = CMD_SEND_DISEQC; + cmd.args[CX24116_DISEQC_ARG2_2] = 0x02; + cmd.args[CX24116_DISEQC_ARG3_0] = 0x00; + cmd.args[CX24116_DISEQC_ARG4_0] = 0x00; + + /* DiSEqC message */ + for (i = 0; i < d->msg_len; i++) + cmd.args[CX24116_DISEQC_MSGOFS + i] = d->msg[i]; + + /* Hack: Derive burst from command else use previous burst */ + if(d->msg_len >= 4 && d->msg[2] == 0x38) + cmd.args[CX24116_DISEQC_BURST] = (d->msg[3] >> 2) & 1; + else + cmd.args[CX24116_DISEQC_BURST] = state->burst; + + cmd.args[CX24116_DISEQC_MSGLEN] = d->msg_len; + cmd.len = CX24116_DISEQC_MSGOFS + d->msg_len; + + ret = cx24116_cmd_execute(fe, &cmd); + + /* Firmware command duration is unknown, so guess... + * + * Eutelsat spec: + * >15ms delay + + * 13.5ms per byte + + * >15ms delay + + * 12.5ms burst + + * >15ms delay + */ + if(ret == 0) + msleep( (cmd.args[CX24116_DISEQC_MSGLEN] << 4) + 60 ); + + return ret; +} + +/* Send DiSEqC burst */ +static int cx24116_diseqc_send_burst(struct dvb_frontend* fe, fe_sec_mini_cmd_t burst) +{ + struct cx24116_state *state = fe->demodulator_priv; + struct cx24116_cmd cmd; + int ret; + + dprintk("%s(%d)\n",__func__,(int)burst); + + cmd.args[0x00] = CMD_SEND_DISEQC; + cmd.args[CX24116_DISEQC_ARG2_2] = 0x02; + cmd.args[CX24116_DISEQC_ARG3_0] = 0x00; + cmd.args[CX24116_DISEQC_ARG4_0] = 0x00; + + if (burst == SEC_MINI_A) + cmd.args[CX24116_DISEQC_BURST] = CX24116_DISEQC_MINI_A; + else if(burst == SEC_MINI_B) + cmd.args[CX24116_DISEQC_BURST] = CX24116_DISEQC_MINI_B; + else + return -EINVAL; + + /* Cache as previous burst state */ + state->burst= cmd.args[CX24116_DISEQC_BURST]; + + cmd.args[CX24116_DISEQC_MSGLEN] = 0x00; + cmd.len= CX24116_DISEQC_MSGOFS; + + ret= cx24116_cmd_execute(fe, &cmd); + + /* Firmware command duration is unknown, so guess... */ + if(ret == 0) + msleep(60); + + return ret; +} + +static void cx24116_release(struct dvb_frontend* fe) +{ + struct cx24116_state* state = fe->demodulator_priv; + dprintk("%s\n",__func__); + kfree(state); +} + +static struct dvb_frontend_ops cx24116_ops; + +struct dvb_frontend* cx24116_attach(const struct cx24116_config* config, + struct i2c_adapter* i2c) +{ + struct cx24116_state* state = NULL; + int ret; + + dprintk("%s\n",__func__); + + /* allocate memory for the internal state */ + state = kmalloc(sizeof(struct cx24116_state), GFP_KERNEL); + if (state == NULL) { + printk("Unable to kmalloc\n"); + goto error; + } + + /* setup the state */ + memset(state, 0, sizeof(struct cx24116_state)); + + state->config = config; + state->i2c = i2c; + + /* check if the demod is present */ + ret = (cx24116_readreg(state, 0xFF) << 8) | cx24116_readreg(state, 0xFE); + if (ret != 0x0501) { + printk("Invalid probe, probably not a CX24116 device\n"); + goto error; + } + + /* create dvb_frontend */ + memcpy(&state->frontend.ops, &cx24116_ops, sizeof(struct dvb_frontend_ops)); + state->frontend.demodulator_priv = state; + return &state->frontend; + +error: + kfree(state); + + return NULL; +} + +static int cx24116_get_params(struct dvb_frontend* fe) +{ + struct cx24116_state *state = fe->demodulator_priv; + struct tv_frontend_properties *cache = &fe->tv_property_cache; + + dprintk("%s()\n",__func__); + + cache->frequency = state->dcur.frequency; + cache->inversion = state->dcur.inversion; + cache->modulation = state->dcur.modulation; + cache->fec_inner = state->dcur.fec; + cache->symbol_rate = state->dcur.symbol_rate; + + return 0; +} + +static int cx24116_initfe(struct dvb_frontend* fe) +{ + dprintk("%s()\n",__func__); + + return cx24116_diseqc_init(fe); +} + +static int cx24116_set_property(struct dvb_frontend *fe, tv_property_t* tvp) +{ + dprintk("%s(..)\n", __func__); + return 0; +} + +static int cx24116_set_params(struct dvb_frontend *fe) +{ + dprintk("%s(..) We were notified that a tune request may occur\n", __func__); + return 0; +} + +/* dvb-core told us to tune, the tv property cache will be complete, + * it's safe for is to pull values and use them for tuning purposes. + */ +static int cx24116_set_frontend(struct dvb_frontend* fe, struct dvb_frontend_parameters *p) +{ + struct cx24116_state *state = fe->demodulator_priv; + struct tv_frontend_properties *c = &fe->tv_property_cache; + struct cx24116_cmd cmd; + fe_status_t tunerstat; + int ret; + u8 retune=4; + + dprintk("%s()\n",__func__); + + state->dnxt.modulation = c->modulation; + state->dnxt.frequency = c->frequency; + + if ((ret = cx24116_set_inversion(state, c->inversion)) != 0) + return ret; + + if ((ret = cx24116_set_fec(state, c->modulation, c->fec_inner)) != 0) + return ret; + + if ((ret = cx24116_set_symbolrate(state, c->symbol_rate)) != 0) + return ret; + + /* discard the 'current' tuning parameters and prepare to tune */ + cx24116_clone_params(fe); + + dprintk("%s: frequency = %d\n", __func__, state->dcur.frequency); + dprintk("%s: symbol_rate = %d\n", __func__, state->dcur.symbol_rate); + dprintk("%s: FEC = %d (mask/val = 0x%02x/0x%02x)\n", __func__, + state->dcur.fec, state->dcur.fec_mask, state->dcur.fec_val); + dprintk("%s: Inversion = %d (val = 0x%02x)\n", __func__, + state->dcur.inversion, state->dcur.inversion_val); + + if (state->config->set_ts_params) + state->config->set_ts_params(fe, 0); + + /* Prepare a tune request */ + cmd.args[0x00] = CMD_TUNEREQUEST; + + /* Frequency */ + cmd.args[0x01] = (state->dcur.frequency & 0xff0000) >> 16; + cmd.args[0x02] = (state->dcur.frequency & 0x00ff00) >> 8; + cmd.args[0x03] = (state->dcur.frequency & 0x0000ff); + + /* Symbol Rate */ + cmd.args[0x04] = ((state->dcur.symbol_rate / 1000) & 0xff00) >> 8; + cmd.args[0x05] = ((state->dcur.symbol_rate / 1000) & 0x00ff); + + /* Automatic Inversion */ + cmd.args[0x06] = state->dcur.inversion_val; + + /* Modulation / FEC & Pilot Off */ + cmd.args[0x07] = state->dcur.fec_val; + + if (c->pilot == PILOT_ON) + cmd.args[0x07] |= 0x40; + + cmd.args[0x08] = CX24116_SEARCH_RANGE_KHZ >> 8; + cmd.args[0x09] = CX24116_SEARCH_RANGE_KHZ & 0xff; + cmd.args[0x0a] = 0x00; + cmd.args[0x0b] = 0x00; + cmd.args[0x0c] = 0x02; + cmd.args[0x0d] = state->dcur.fec_mask; + cmd.args[0x0e] = 0x06; + cmd.args[0x0f] = 0x00; + cmd.args[0x10] = 0x00; + cmd.args[0x11] = 0xFA; + cmd.args[0x12] = 0x24; + cmd.len= 0x13; + + /* We need to support pilot and non-pilot tuning in the + * driver automatically. This is a workaround for because + * the demod does not support autodetect. + */ + do { + /* Reset status register? */ + cx24116_writereg(state, 0x9d, 0xc1); + + /* Tune */ + ret = cx24116_cmd_execute(fe, &cmd); + if( ret != 0 ) + break; + + /* The hardware can take time to lock, wait a while */ + msleep(500); + + cx24116_read_status(fe, &tunerstat); + if(tunerstat & FE_HAS_SIGNAL) { + if(tunerstat & FE_HAS_SYNC) + /* Tuned */ + break; + else if(c->pilot == PILOT_AUTO) + /* Toggle pilot bit */ + cmd.args[0x07] ^= 0x40; + } + } + while(--retune); + + return ret; +} + +static struct dvb_frontend_ops cx24116_ops = { + + .info = { + .name = "Conexant CX24116/CX24118", + .type = FE_QPSK, + .frequency_min = 950000, + .frequency_max = 2150000, + .frequency_stepsize = 1011, /* kHz for QPSK frontends */ + .frequency_tolerance = 5000, + .symbol_rate_min = 1000000, + .symbol_rate_max = 45000000, + .caps = FE_CAN_INVERSION_AUTO | + FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 | + FE_CAN_FEC_4_5 | FE_CAN_FEC_5_6 | FE_CAN_FEC_6_7 | + FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO | + FE_CAN_QPSK | FE_CAN_RECOVER + }, + + .release = cx24116_release, + + .init = cx24116_initfe, + .read_status = cx24116_read_status, + .read_ber = cx24116_read_ber, + .read_signal_strength = cx24116_read_signal_strength, + .read_snr = cx24116_read_snr, + .read_ucblocks = cx24116_read_ucblocks, + .set_tone = cx24116_set_tone, + .set_voltage = cx24116_set_voltage, + .diseqc_send_master_cmd = cx24116_send_diseqc_msg, + .diseqc_send_burst = cx24116_diseqc_send_burst, + + .set_property = cx24116_set_property, + .set_params = cx24116_set_params, + .set_frontend = cx24116_set_frontend, +}; + +module_param(debug, int, 0644); +MODULE_PARM_DESC(debug, "Activates frontend debugging (default:0)"); + +MODULE_DESCRIPTION("DVB Frontend module for Conexant cx24116/cx24118 hardware"); +MODULE_AUTHOR("Steven Toth"); +MODULE_LICENSE("GPL"); + +EXPORT_SYMBOL(cx24116_attach); diff --git a/drivers/media/dvb/frontends/cx24116.h b/drivers/media/dvb/frontends/cx24116.h new file mode 100644 index 0000000..2789672 --- /dev/null +++ b/drivers/media/dvb/frontends/cx24116.h @@ -0,0 +1,50 @@ +/* + Conexant cx24116/cx24118 - DVBS/S2 Satellite demod/tuner driver + + Copyright (C) 2006 Steven Toth + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#ifndef CX24116_H +#define CX24116_H + +#include + +struct cx24116_config +{ + /* the demodulator's i2c address */ + u8 demod_address; + + /* Need to set device param for start_dma */ + int (*set_ts_params)(struct dvb_frontend* fe, int is_punctured); + + /* Need to reset device during firmware loading */ + int (*reset_device)(struct dvb_frontend* fe); +}; + +#if defined(CONFIG_DVB_CX24116) || defined(CONFIG_DVB_CX24116_MODULE) +extern struct dvb_frontend* cx24116_attach(const struct cx24116_config* config, + struct i2c_adapter* i2c); +#else +static inline struct dvb_frontend* cx24116_attach(const struct cx24116_config* config, + struct i2c_adapter* i2c) +{ + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __FUNCTION__); + return NULL; +} +#endif // CONFIG_DVB_CX24116 + +#endif /* CX24116_H */ -- cgit v0.10.2 From 5bd1b66359437864e6b46420ba6770c2b1c4362c Mon Sep 17 00:00:00 2001 From: Steven Toth Date: Thu, 4 Sep 2008 01:17:33 -0300 Subject: V4L/DVB (8987): cx88: Add support for the Hauppauge HVR4000 and HVR4000-LITE (S2) boards Adding support for Hauppauge's cx88 S2 based products, based on the cx24116 DVB-S2 demodulator. Signed-off-by: Steven Toth Signed-off-by: Mauro Carvalho Chehab diff --git a/Documentation/video4linux/CARDLIST.cx88 b/Documentation/video4linux/CARDLIST.cx88 index 7cf5685..c95a2fb 100644 --- a/Documentation/video4linux/CARDLIST.cx88 +++ b/Documentation/video4linux/CARDLIST.cx88 @@ -66,3 +66,5 @@ 65 -> DViCO FusionHDTV 7 Gold [18ac:d610] 66 -> Prolink Pixelview MPEG 8000GT [1554:4935] 67 -> Kworld PlusTV HD PCI 120 (ATSC 120) [17de:08c1] + 68 -> Hauppauge WinTV-HVR4000 DVB-S/S2/T/Hybrid [0070:6900,0070:6904,0070:6902] + 69 -> Hauppauge WinTV-HVR4000(Lite) DVB-S/S2 [0070:6905,0070:6906] diff --git a/drivers/media/video/cx88/cx88-cards.c b/drivers/media/video/cx88/cx88-cards.c index de199a2..538967e 100644 --- a/drivers/media/video/cx88/cx88-cards.c +++ b/drivers/media/video/cx88/cx88-cards.c @@ -1664,6 +1664,51 @@ static const struct cx88_board cx88_boards[] = { }, .mpeg = CX88_MPEG_DVB, }, + [CX88_BOARD_HAUPPAUGE_HVR4000] = { + .name = "Hauppauge WinTV-HVR4000 DVB-S/S2/T/Hybrid", + .tuner_type = TUNER_PHILIPS_FMD1216ME_MK3, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .tda9887_conf = TDA9887_PRESENT, + /* + * GPIO0 (WINTV2000) + * + * Analogue SAT DVB-T + * Antenna 0xc4bf 0xc4bb + * Composite 0xc4bf 0xc4bb + * S-Video 0xc4bf 0xc4bb + * Composite1 0xc4ff 0xc4fb + * S-Video1 0xc4ff 0xc4fb + */ + .input = {{ + .type = CX88_VMUX_TELEVISION, + .vmux = 0, + .gpio0 = 0xc4bf, + }, { + .type = CX88_VMUX_COMPOSITE1, + .vmux = 1, + .gpio0 = 0xc4bf, + }, { + .type = CX88_VMUX_SVIDEO, + .vmux = 2, + .gpio0 = 0xc4bf, + } }, + /* fixme: Add radio support */ + .mpeg = CX88_MPEG_DVB, + }, + [CX88_BOARD_HAUPPAUGE_HVR4000LITE] = { + .name = "Hauppauge WinTV-HVR4000(Lite) DVB-S/S2", + .tuner_type = UNSET, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .input = {{ + .type = CX88_VMUX_DVB, + .vmux = 0, + } }, + .mpeg = CX88_MPEG_DVB, + }, }; /* ------------------------------------------------------------------ */ @@ -2013,6 +2058,26 @@ static const struct cx88_subid cx88_subids[] = { .subvendor = 0x17de, .subdevice = 0x08c1, .card = CX88_BOARD_KWORLD_ATSC_120, + }, { + .subvendor = 0x0070, + .subdevice = 0x6900, + .card = CX88_BOARD_HAUPPAUGE_HVR4000, + }, { + .subvendor = 0x0070, + .subdevice = 0x6904, + .card = CX88_BOARD_HAUPPAUGE_HVR4000, + }, { + .subvendor = 0x0070, + .subdevice = 0x6902, + .card = CX88_BOARD_HAUPPAUGE_HVR4000, + }, { + .subvendor = 0x0070, + .subdevice = 0x6905, + .card = CX88_BOARD_HAUPPAUGE_HVR4000LITE, + }, { + .subvendor = 0x0070, + .subdevice = 0x6906, + .card = CX88_BOARD_HAUPPAUGE_HVR4000LITE, }, }; @@ -2065,6 +2130,13 @@ static void hauppauge_eeprom(struct cx88_core *core, u8 *eeprom_data) case 14669: /* WinTV-HVR3000 (OEM, no IR, no b/panel video - Low profile) */ case 28552: /* WinTV-PVR 'Roslyn' (No IR) */ case 34519: /* WinTV-PCI-FM */ + case 69009: + /* WinTV-HVR4000 (DVBS/S2/T, Video and IR, back panel inputs) */ + case 69100: /* WinTV-HVR4000LITE (DVBS/S2, IR) */ + case 69500: /* WinTV-HVR4000LITE (DVBS/S2, No IR) */ + case 69559: + /* WinTV-HVR4000 (DVBS/S2/T, Video no IR, back panel inputs) */ + case 69569: /* WinTV-HVR4000 (DVBS/S2/T, Video no IR) */ case 90002: /* Nova-T-PCI (9002) */ case 92001: /* Nova-S-Plus (Video and IR) */ case 92002: /* Nova-S-Plus (Video and IR) */ @@ -2415,6 +2487,11 @@ static void cx88_card_setup_pre_i2c(struct cx88_core *core) /* Enable the xc5000 tuner */ cx_set(MO_GP0_IO, 0x00001010); break; + case CX88_BOARD_HAUPPAUGE_HVR4000: + case CX88_BOARD_HAUPPAUGE_HVR4000LITE: + /* Init GPIO to allow tuner to attach */ + cx_write(MO_GP0_IO, 0x0000c4bf); + udelay(1000); } } @@ -2489,6 +2566,8 @@ static void cx88_card_setup(struct cx88_core *core) case CX88_BOARD_HAUPPAUGE_HVR1100LP: case CX88_BOARD_HAUPPAUGE_HVR3000: case CX88_BOARD_HAUPPAUGE_HVR1300: + case CX88_BOARD_HAUPPAUGE_HVR4000: + case CX88_BOARD_HAUPPAUGE_HVR4000LITE: if (0 == core->i2c_rc) hauppauge_eeprom(core, eeprom); break; diff --git a/drivers/media/video/cx88/cx88-dvb.c b/drivers/media/video/cx88/cx88-dvb.c index 9f0e5b3..7a5a4a2 100644 --- a/drivers/media/video/cx88/cx88-dvb.c +++ b/drivers/media/video/cx88/cx88-dvb.c @@ -48,6 +48,7 @@ #include "tuner-simple.h" #include "tda9887.h" #include "s5h1411.h" +#include "cx24116.h" MODULE_DESCRIPTION("driver for cx2388x based DVB cards"); MODULE_AUTHOR("Chris Pascoe "); @@ -518,6 +519,35 @@ static int attach_xc3028(u8 addr, struct cx8802_dev *dev) return 0; } +static int cx24116_set_ts_param(struct dvb_frontend *fe, + int is_punctured) +{ + struct cx8802_dev *dev = fe->dvb->priv; + dev->ts_gen_cntrl = 0x2; + + return 0; +} + +static int cx24116_reset_device(struct dvb_frontend *fe) +{ + struct cx8802_dev *dev = fe->dvb->priv; + struct cx88_core *core = dev->core; + + /* Reset the part */ + cx_write(MO_SRST_IO, 0); + msleep(10); + cx_write(MO_SRST_IO, 1); + msleep(10); + + return 0; +} + +static struct cx24116_config hauppauge_hvr4000_config = { + .demod_address = 0x05, + .set_ts_params = cx24116_set_ts_param, + .reset_device = cx24116_reset_device, +}; + static int dvb_register(struct cx8802_dev *dev) { struct cx88_core *core = dev->core; @@ -876,6 +906,18 @@ static int dvb_register(struct cx8802_dev *dev) goto frontend_detach; } break; + case CX88_BOARD_HAUPPAUGE_HVR4000: + case CX88_BOARD_HAUPPAUGE_HVR4000LITE: + /* Support for DVB-S only, not DVB-T support */ + dev->dvb.frontend = dvb_attach(cx24116_attach, + &hauppauge_hvr4000_config, + &dev->core->i2c_adap); + if (dev->dvb.frontend) { + dvb_attach(isl6421_attach, dev->dvb.frontend, + &dev->core->i2c_adap, + 0x08, 0x00, 0x00); + } + break; default: printk(KERN_ERR "%s/2: The frontend of your DVB/ATSC card isn't supported yet\n", core->name); diff --git a/drivers/media/video/cx88/cx88-input.c b/drivers/media/video/cx88/cx88-input.c index 53526d9..097081e 100644 --- a/drivers/media/video/cx88/cx88-input.c +++ b/drivers/media/video/cx88/cx88-input.c @@ -224,6 +224,8 @@ int cx88_ir_init(struct cx88_core *core, struct pci_dev *pci) case CX88_BOARD_HAUPPAUGE_NOVASPLUS_S1: case CX88_BOARD_HAUPPAUGE_HVR1100: case CX88_BOARD_HAUPPAUGE_HVR3000: + case CX88_BOARD_HAUPPAUGE_HVR4000: + case CX88_BOARD_HAUPPAUGE_HVR4000LITE: ir_codes = ir_codes_hauppauge_new; ir_type = IR_TYPE_RC5; ir->sampling = 1; @@ -462,6 +464,8 @@ void cx88_ir_irq(struct cx88_core *core) case CX88_BOARD_HAUPPAUGE_HVR1100: case CX88_BOARD_HAUPPAUGE_HVR3000: case CX88_BOARD_PINNACLE_PCTV_HD_800i: + case CX88_BOARD_HAUPPAUGE_HVR4000: + case CX88_BOARD_HAUPPAUGE_HVR4000LITE: ircode = ir_decode_biphase(ir->samples, ir->scount, 5, 7); ir_dprintk("biphase decoded: %x\n", ircode); if ((ircode & 0xfffff000) != 0x3000) diff --git a/drivers/media/video/cx88/cx88.h b/drivers/media/video/cx88/cx88.h index 54fe650..edcdaba 100644 --- a/drivers/media/video/cx88/cx88.h +++ b/drivers/media/video/cx88/cx88.h @@ -221,6 +221,8 @@ extern struct sram_channel cx88_sram_channels[]; #define CX88_BOARD_DVICO_FUSIONHDTV_7_GOLD 65 #define CX88_BOARD_PROLINK_PV_8000GT 66 #define CX88_BOARD_KWORLD_ATSC_120 67 +#define CX88_BOARD_HAUPPAUGE_HVR4000 68 +#define CX88_BOARD_HAUPPAUGE_HVR4000LITE 69 enum cx88_itype { CX88_VMUX_COMPOSITE1 = 1, -- cgit v0.10.2 From 13c97bf56724b4f2d3dac139fb4cb081a3c401dc Mon Sep 17 00:00:00 2001 From: Steven Toth Date: Thu, 4 Sep 2008 21:19:43 -0300 Subject: V4L/DVB (8988): S2API: Allow the properties to call legacy ioctls SET_TONE and SET_VOLTAGE were not previously implemented. Two options existed. Either cut/paste from the previous ioctl handler into the process_properties function, which is code duplication. Or, split the current ioctl handler into it's two major pieces. Piece 1, responsible for input validation and semaphore acquiring Piece 2 the processing of the previous ioctls and finally, a new third pieces where the array of properties is processed, and can freely call the legacy ioctl handler without having to re-acquire the fepriv->sem semaphore. This is a clean approach and ensures the existing legacy ioctls are processed as they were previously (but with an extra function call) and allows the new API to share code without duplication. Signed-off-by: Steven Toth Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/dvb/dvb-core/dvb_frontend.c b/drivers/media/dvb/dvb-core/dvb_frontend.c index e68974b..86af06c 100644 --- a/drivers/media/dvb/dvb-core/dvb_frontend.c +++ b/drivers/media/dvb/dvb-core/dvb_frontend.c @@ -1156,9 +1156,16 @@ int tv_property_cache_submit(struct dvb_frontend *fe) return r; } -int tv_property_process(struct dvb_frontend *fe, tv_property_t *tvp) +static int dvb_frontend_ioctl_legacy(struct inode *inode, struct file *file, + unsigned int cmd, void *parg); +static int dvb_frontend_ioctl_properties(struct inode *inode, struct file *file, + unsigned int cmd, void *parg); + +int tv_property_process(struct dvb_frontend *fe, tv_property_t *tvp, + struct inode *inode, struct file *file) { int r = 0; + struct dvb_frontend_private *fepriv = fe->frontend_priv; printk("%s()\n", __FUNCTION__); tv_property_dump(tvp); @@ -1181,7 +1188,9 @@ int tv_property_process(struct dvb_frontend *fe, tv_property_t *tvp) */ fe->tv_property_cache.state = TV_SEQ_COMPLETE; printk("%s() Finalised property cache\n", __FUNCTION__); - r = tv_property_cache_submit(fe); + r |= tv_property_cache_submit(fe); + r |= dvb_frontend_ioctl_legacy(inode, file, FE_SET_FRONTEND, + &fepriv->parameters); break; case TV_SET_FREQUENCY: fe->tv_property_cache.frequency = tvp->u.data; @@ -1278,10 +1287,25 @@ int tv_property_process(struct dvb_frontend *fe, tv_property_t *tvp) case TV_GET_ISDB_LAYERC_SEGMENT_WIDTH: tvp->u.data = fe->tv_property_cache.isdb_layerc_segment_width; break; - + case TV_SET_VOLTAGE: + fe->tv_property_cache.voltage = tvp->u.data; + r = dvb_frontend_ioctl_legacy(inode, file, FE_SET_VOLTAGE, + &fe->tv_property_cache.voltage); + break; + case TV_GET_VOLTAGE: + tvp->u.data = fe->tv_property_cache.voltage; + break; + case TV_SET_TONE: + fe->tv_property_cache.sectone = tvp->u.data; + r = dvb_frontend_ioctl_legacy(inode, file, FE_SET_TONE, + (void *)fe->tv_property_cache.sectone); + break; + case TV_GET_TONE: + tvp->u.data = fe->tv_property_cache.sectone; + break; } - return 0; + return r; } static int dvb_frontend_ioctl(struct inode *inode, struct file *file, @@ -1291,7 +1315,6 @@ static int dvb_frontend_ioctl(struct inode *inode, struct file *file, struct dvb_frontend *fe = dvbdev->priv; struct dvb_frontend_private *fepriv = fe->frontend_priv; int err = -EOPNOTSUPP; - tv_property_t* tvp; dprintk ("%s\n", __func__); @@ -1306,6 +1329,25 @@ static int dvb_frontend_ioctl(struct inode *inode, struct file *file, if (down_interruptible (&fepriv->sem)) return -ERESTARTSYS; + if ((cmd == FE_SET_PROPERTY) || (cmd == FE_GET_PROPERTY)) + err = dvb_frontend_ioctl_properties(inode, file, cmd, parg); + else + err = dvb_frontend_ioctl_legacy(inode, file, cmd, parg); + + up(&fepriv->sem); + return err; +} + +static int dvb_frontend_ioctl_properties(struct inode *inode, struct file *file, + unsigned int cmd, void *parg) +{ + struct dvb_device *dvbdev = file->private_data; + struct dvb_frontend *fe = dvbdev->priv; + int err = -EOPNOTSUPP; + tv_property_t *tvp; + + dprintk("%s\n", __func__); + if(cmd == FE_SET_PROPERTY) { printk("%s() FE_SET_PROPERTY\n", __FUNCTION__); @@ -1314,7 +1356,7 @@ static int dvb_frontend_ioctl(struct inode *inode, struct file *file, /* TODO: ioctl userdata out of range check here */ tvp = parg; while(tvp->cmd != TV_SEQ_UNDEFINED) { - tv_property_process(fe, tvp); + tv_property_process(fe, tvp, inode, file); if( (tvp->cmd == TV_SEQ_TERMINATE) || (tvp->cmd == TV_SEQ_COMPLETE) ) break; tvp++; @@ -1322,11 +1364,21 @@ static int dvb_frontend_ioctl(struct inode *inode, struct file *file, if(fe->tv_property_cache.state == TV_SEQ_COMPLETE) { printk("%s() Property cache is full, tuning\n", __FUNCTION__); - cmd = FE_SET_FRONTEND; } err = 0; } + return err; +} + +static int dvb_frontend_ioctl_legacy(struct inode *inode, struct file *file, + unsigned int cmd, void *parg) +{ + struct dvb_device *dvbdev = file->private_data; + struct dvb_frontend *fe = dvbdev->priv; + struct dvb_frontend_private *fepriv = fe->frontend_priv; + int err = -EOPNOTSUPP; + switch (cmd) { case FE_GET_INFO: { struct dvb_frontend_info* info = parg; @@ -1585,7 +1637,6 @@ static int dvb_frontend_ioctl(struct inode *inode, struct file *file, break; }; - up (&fepriv->sem); return err; } -- cgit v0.10.2 From af832623c2a44525df6e4ae0142fb0385479546c Mon Sep 17 00:00:00 2001 From: "Igor M. Liplianin" Date: Thu, 4 Sep 2008 17:24:14 -0300 Subject: V4L/DVB (8989): Added support for TeVii S460 DVB-S/S2 card Added support for TeVii S460 DVB-S/S2 card. The card based on cx24116 demodulator. Signed-off-by: Igor M. Liplianin Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/cx88/cx88-cards.c b/drivers/media/video/cx88/cx88-cards.c index 538967e..23948da 100644 --- a/drivers/media/video/cx88/cx88-cards.c +++ b/drivers/media/video/cx88/cx88-cards.c @@ -1709,6 +1709,18 @@ static const struct cx88_board cx88_boards[] = { } }, .mpeg = CX88_MPEG_DVB, }, + [CX88_BOARD_TEVII_S460] = { + .name = "TeVii S460 DVB-S/S2", + .tuner_type = UNSET, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .input = {{ + .type = CX88_VMUX_DVB, + .vmux = 0, + } }, + .mpeg = CX88_MPEG_DVB, + }, }; /* ------------------------------------------------------------------ */ @@ -2078,6 +2090,10 @@ static const struct cx88_subid cx88_subids[] = { .subvendor = 0x0070, .subdevice = 0x6906, .card = CX88_BOARD_HAUPPAUGE_HVR4000LITE, + }, { + .subvendor = 0xD460, + .subdevice = 0x9022, + .card = CX88_BOARD_TEVII_S460, }, }; @@ -2649,7 +2665,14 @@ static void cx88_card_setup(struct cx88_core *core) tea5767_cfg.priv = &ctl; cx88_call_i2c_clients(core, TUNER_SET_CONFIG, &tea5767_cfg); + break; } + case CX88_BOARD_TEVII_S460: + cx_write(MO_SRST_IO, 0); + msleep(100); + cx_write(MO_SRST_IO, 1); + msleep(100); + break; } /*end switch() */ diff --git a/drivers/media/video/cx88/cx88-dvb.c b/drivers/media/video/cx88/cx88-dvb.c index 7a5a4a2..5ff6e9d 100644 --- a/drivers/media/video/cx88/cx88-dvb.c +++ b/drivers/media/video/cx88/cx88-dvb.c @@ -376,6 +376,31 @@ static int geniatech_dvbs_set_voltage(struct dvb_frontend *fe, return 0; } +static int tevii_dvbs_set_voltage(struct dvb_frontend *fe, + fe_sec_voltage_t voltage) +{ + struct cx8802_dev *dev= fe->dvb->priv; + struct cx88_core *core = dev->core; + + switch (voltage) { + case SEC_VOLTAGE_13: + printk("LNB Voltage SEC_VOLTAGE_13\n"); + cx_write(MO_GP0_IO, 0x00006040); + break; + case SEC_VOLTAGE_18: + printk("LNB Voltage SEC_VOLTAGE_18\n"); + cx_write(MO_GP0_IO, 0x00006060); + break; + case SEC_VOLTAGE_OFF: + printk("LNB Voltage SEC_VOLTAGE_off\n"); + break; + } + + if (core->prev_set_voltage) + return core->prev_set_voltage(fe, voltage); + return 0; +} + static int cx88_pci_nano_callback(void *ptr, int command, int arg) { struct cx88_core *core = ptr; @@ -548,6 +573,12 @@ static struct cx24116_config hauppauge_hvr4000_config = { .reset_device = cx24116_reset_device, }; +static struct cx24116_config tevii_s460_config = { + .demod_address = 0x55, + .set_ts_params = cx24116_set_ts_param, + .reset_device = cx24116_reset_device, +}; + static int dvb_register(struct cx8802_dev *dev) { struct cx88_core *core = dev->core; @@ -918,6 +949,15 @@ static int dvb_register(struct cx8802_dev *dev) 0x08, 0x00, 0x00); } break; + case CX88_BOARD_TEVII_S460: + dev->dvb.frontend = dvb_attach(cx24116_attach, + &tevii_s460_config, + &core->i2c_adap); + if (dev->dvb.frontend != NULL) { + core->prev_set_voltage = dev->dvb.frontend->ops.set_voltage; + dev->dvb.frontend->ops.set_voltage = tevii_dvbs_set_voltage; + } + break; default: printk(KERN_ERR "%s/2: The frontend of your DVB/ATSC card isn't supported yet\n", core->name); diff --git a/drivers/media/video/cx88/cx88.h b/drivers/media/video/cx88/cx88.h index edcdaba..2b82c6a 100644 --- a/drivers/media/video/cx88/cx88.h +++ b/drivers/media/video/cx88/cx88.h @@ -223,6 +223,7 @@ extern struct sram_channel cx88_sram_channels[]; #define CX88_BOARD_KWORLD_ATSC_120 67 #define CX88_BOARD_HAUPPAUGE_HVR4000 68 #define CX88_BOARD_HAUPPAUGE_HVR4000LITE 69 +#define CX88_BOARD_TEVII_S460 70 enum cx88_itype { CX88_VMUX_COMPOSITE1 = 1, -- cgit v0.10.2 From 2cf801e3e38f649d25fe3b4e236976f45e26289f Mon Sep 17 00:00:00 2001 From: Steven Toth Date: Mon, 8 Sep 2008 12:07:06 -0300 Subject: V4L/DVB (8990): S2API: DVB-S/S2 voltage selection bug fix Thanks to Hans Werner for finding the problem. Signed-off-by: Steven Toth Signed-off-by: Mauro Carvalho Chehab diff --git a/Documentation/video4linux/CARDLIST.cx88 b/Documentation/video4linux/CARDLIST.cx88 index c95a2fb..b51485c 100644 --- a/Documentation/video4linux/CARDLIST.cx88 +++ b/Documentation/video4linux/CARDLIST.cx88 @@ -68,3 +68,4 @@ 67 -> Kworld PlusTV HD PCI 120 (ATSC 120) [17de:08c1] 68 -> Hauppauge WinTV-HVR4000 DVB-S/S2/T/Hybrid [0070:6900,0070:6904,0070:6902] 69 -> Hauppauge WinTV-HVR4000(Lite) DVB-S/S2 [0070:6905,0070:6906] + 70 -> TeVii S460 DVB-S/S2 [D460:9022] diff --git a/drivers/media/dvb/dvb-core/dvb_frontend.c b/drivers/media/dvb/dvb-core/dvb_frontend.c index 86af06c..620c620 100644 --- a/drivers/media/dvb/dvb-core/dvb_frontend.c +++ b/drivers/media/dvb/dvb-core/dvb_frontend.c @@ -1290,7 +1290,7 @@ int tv_property_process(struct dvb_frontend *fe, tv_property_t *tvp, case TV_SET_VOLTAGE: fe->tv_property_cache.voltage = tvp->u.data; r = dvb_frontend_ioctl_legacy(inode, file, FE_SET_VOLTAGE, - &fe->tv_property_cache.voltage); + (void *)fe->tv_property_cache.voltage); break; case TV_GET_VOLTAGE: tvp->u.data = fe->tv_property_cache.voltage; -- cgit v0.10.2 From fe03d5ee6758a2533dbc5e69a693d264d270d04b Mon Sep 17 00:00:00 2001 From: "Igor M. Liplianin" Date: Mon, 8 Sep 2008 17:16:40 -0300 Subject: V4L/DVB (8991): Added support for DVBWorld 2104 and TeVii S650 USB DVB-S2 cards Added support for DVBWorld 2104 and TeVii S650 USB DVB-S2 cards This cards based on cx24116 demodulator. Signed-off-by: Igor M. Liplianin Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/dvb/dvb-usb/dw2102.c b/drivers/media/dvb/dvb-usb/dw2102.c index a4d898b..0f3f962 100644 --- a/drivers/media/dvb/dvb-usb/dw2102.c +++ b/drivers/media/dvb/dvb-usb/dw2102.c @@ -1,4 +1,5 @@ -/* DVB USB framework compliant Linux driver for the DVBWorld DVB-S 2102 Card +/* DVB USB framework compliant Linux driver for the +* DVBWorld DVB-S 2101, 2102, DVB-S2 2104 Card * * Copyright (C) 2008 Igor M. Liplianin (liplianin@me.by) * @@ -12,18 +13,23 @@ #include "dw2102.h" #include "stv0299.h" #include "z0194a.h" +#include "cx24116.h" #ifndef USB_PID_DW2102 #define USB_PID_DW2102 0x2102 #endif +#ifndef USB_PID_DW2104 +#define USB_PID_DW2104 0x2104 +#endif + #define DW2102_READ_MSG 0 #define DW2102_WRITE_MSG 1 #define REG_1F_SYMBOLRATE_BYTE0 0x1f #define REG_20_SYMBOLRATE_BYTE1 0x20 #define REG_21_SYMBOLRATE_BYTE2 0x21 - +/* on my own*/ #define DW2102_VOLTAGE_CTRL (0x1800) #define DW2102_RC_QUERY (0x1a00) @@ -35,22 +41,27 @@ struct dw2102_rc_keys { u32 event; }; +/* debug */ +static int dvb_usb_dw2102_debug; +module_param_named(debug, dvb_usb_dw2102_debug, int, 0644); +MODULE_PARM_DESC(debug, "set debugging level (1=info 2=xfer (or-able))." DVB_USB_DEBUG_STATUS); + DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); static int dw2102_op_rw(struct usb_device *dev, u8 request, u16 value, - u8 *data, u16 len, int flags) + u16 index, u8 * data, u16 len, int flags) { int ret; u8 u8buf[len]; unsigned int pipe = (flags == DW2102_READ_MSG) ? - usb_rcvctrlpipe(dev, 0) : usb_sndctrlpipe(dev, 0); + usb_rcvctrlpipe(dev, 0) : usb_sndctrlpipe(dev, 0); u8 request_type = (flags == DW2102_READ_MSG) ? USB_DIR_IN : USB_DIR_OUT; if (flags == DW2102_WRITE_MSG) memcpy(u8buf, data, len); - ret = usb_control_msg(dev, pipe, request, - request_type | USB_TYPE_VENDOR, value, 0 , u8buf, len, 2000); + ret = usb_control_msg(dev, pipe, request, request_type | USB_TYPE_VENDOR, + value, index , u8buf, len, 2000); if (flags == DW2102_READ_MSG) memcpy(data, u8buf, len); @@ -65,7 +76,6 @@ static int dw2102_i2c_transfer(struct i2c_adapter *adap, struct i2c_msg msg[], struct dvb_usb_device *d = i2c_get_adapdata(adap); int i = 0, ret = 0; u8 buf6[] = {0x2c, 0x05, 0xc0, 0, 0, 0, 0}; - u8 request; u16 value; if (!d) @@ -76,12 +86,11 @@ struct dvb_usb_device *d = i2c_get_adapdata(adap); switch (num) { case 2: /* read stv0299 register */ - request = 0xb5; value = msg[0].buf[0];/* register */ for (i = 0; i < msg[1].len; i++) { value = value + i; - ret = dw2102_op_rw(d->udev, 0xb5, - value, buf6, 2, DW2102_READ_MSG); + ret = dw2102_op_rw(d->udev, 0xb5, value, 0, + buf6, 2, DW2102_READ_MSG); msg[1].buf[i] = buf6[0]; } @@ -93,8 +102,8 @@ struct dvb_usb_device *d = i2c_get_adapdata(adap); buf6[0] = 0x2a; buf6[1] = msg[0].buf[0]; buf6[2] = msg[0].buf[1]; - ret = dw2102_op_rw(d->udev, 0xb2, - 0, buf6, 3, DW2102_WRITE_MSG); + ret = dw2102_op_rw(d->udev, 0xb2, 0, 0, + buf6, 3, DW2102_WRITE_MSG); break; case 0x60: if (msg[0].flags == 0) { @@ -106,26 +115,26 @@ struct dvb_usb_device *d = i2c_get_adapdata(adap); buf6[4] = msg[0].buf[1]; buf6[5] = msg[0].buf[2]; buf6[6] = msg[0].buf[3]; - ret = dw2102_op_rw(d->udev, 0xb2, - 0, buf6, 7, DW2102_WRITE_MSG); + ret = dw2102_op_rw(d->udev, 0xb2, 0, 0, + buf6, 7, DW2102_WRITE_MSG); } else { - /* write to tuner pll */ - ret = dw2102_op_rw(d->udev, 0xb5, - 0, buf6, 1, DW2102_READ_MSG); + /* read from tuner */ + ret = dw2102_op_rw(d->udev, 0xb5, 0,0, + buf6, 1, DW2102_READ_MSG); msg[0].buf[0] = buf6[0]; } break; case (DW2102_RC_QUERY): - ret = dw2102_op_rw(d->udev, 0xb8, - 0, buf6, 2, DW2102_READ_MSG); + ret = dw2102_op_rw(d->udev, 0xb8, 0, 0, + buf6, 2, DW2102_READ_MSG); msg[0].buf[0] = buf6[0]; msg[0].buf[1] = buf6[1]; break; case (DW2102_VOLTAGE_CTRL): buf6[0] = 0x30; buf6[1] = msg[0].buf[0]; - ret = dw2102_op_rw(d->udev, 0xb2, - 0, buf6, 2, DW2102_WRITE_MSG); + ret = dw2102_op_rw(d->udev, 0xb2, 0, 0, + buf6, 2, DW2102_WRITE_MSG); break; } @@ -136,6 +145,88 @@ struct dvb_usb_device *d = i2c_get_adapdata(adap); return num; } +static int dw2104_i2c_transfer(struct i2c_adapter *adap, struct i2c_msg msg[], int num) +{ + struct dvb_usb_device *d = i2c_get_adapdata(adap); + int ret = 0; + int len, i; + + if (!d) + return -ENODEV; + if (mutex_lock_interruptible(&d->i2c_mutex) < 0) + return -EAGAIN; + + switch (num) { + case 2: { + /* read */ + /* first write first register number */ + u8 ibuf [msg[1].len + 2], obuf[3]; + obuf[0] = 0xaa; + obuf[1] = msg[0].len; + obuf[2] = msg[0].buf[0]; + ret = dw2102_op_rw(d->udev, 0xc2, 0, 0, + obuf, msg[0].len + 2, DW2102_WRITE_MSG); + /* second read registers */ + ret = dw2102_op_rw(d->udev, 0xc3, 0xab , 0, + ibuf, msg[1].len + 2, DW2102_READ_MSG); + memcpy(msg[1].buf, ibuf + 2, msg[1].len); + + break; + } + case 1: + switch (msg[0].addr) { + case 0x55: { + if (msg[0].buf[0] == 0xf7) { + /* firmware */ + /* Write in small blocks */ + u8 obuf[19]; + obuf[0] = 0xaa; + obuf[1] = 0x11; + obuf[2] = 0xf7; + len = msg[0].len - 1; + i = 1; + do { + memcpy(obuf + 3, msg[0].buf + i, (len > 16 ? 16 : len)); + ret = dw2102_op_rw(d->udev, 0xc2, 0, 0, + obuf, (len > 16 ? 16 : len) + 3, DW2102_WRITE_MSG); + i += 16; + len -= 16; + } while (len > 0); + } else { + /* write to register */ + u8 obuf[msg[0].len + 2]; + obuf[0] = 0xaa; + obuf[1] = msg[0].len; + memcpy(obuf + 2, msg[0].buf, msg[0].len); + ret = dw2102_op_rw(d->udev, 0xc2, 0, 0, + obuf, msg[0].len + 2, DW2102_WRITE_MSG); + } + break; + } + case(DW2102_RC_QUERY): { + u8 ibuf[2]; + ret = dw2102_op_rw(d->udev, 0xb8, 0, 0, + ibuf, 2, DW2102_READ_MSG); + memcpy(msg[0].buf, ibuf , 2); + break; + } + case(DW2102_VOLTAGE_CTRL): { + u8 obuf[2]; + obuf[0] = 0x30; + obuf[1] = msg[0].buf[0]; + ret = dw2102_op_rw(d->udev, 0xb2, 0, 0, + obuf, 2, DW2102_WRITE_MSG); + break; + } + } + + break; + } + + mutex_unlock(&d->i2c_mutex); + return num; +} + static u32 dw2102_i2c_func(struct i2c_adapter *adapter) { return I2C_FUNC_I2C; @@ -146,6 +237,34 @@ static struct i2c_algorithm dw2102_i2c_algo = { .functionality = dw2102_i2c_func, }; +static struct i2c_algorithm dw2104_i2c_algo = { + .master_xfer = dw2104_i2c_transfer, + .functionality = dw2102_i2c_func, +}; + +static int dw2102_read_mac_address(struct dvb_usb_device *d, u8 mac[6]) +{ + int i; + u8 ibuf[] = {0, 0}; + u8 eeprom[256], eepromline[16]; + + for (i = 0; i < 256; i++) { + if (dw2102_op_rw(d->udev, 0xb6, 0xa0 , i, ibuf, 2, DW2102_READ_MSG) < 0) { + err("read eeprom failed."); + return -1; + } else { + eepromline[i%16] = ibuf[0]; + eeprom[i] = ibuf[0]; + } + if ((i % 16) == 15) { + deb_xfer("%02x: ", i - 15); + debug_dump(eepromline, 16, deb_xfer); + } + } + memcpy(mac, eeprom + 8, 6); + return 0; +}; + static int dw2102_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage) { static u8 command_13v[1] = {0x00}; @@ -163,6 +282,22 @@ static int dw2102_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage) return 0; } +static struct cx24116_config dw2104_config = { + .demod_address = 0x55, + /*.mpg_clk_pos_pol = 0x01,*/ +}; + +static int dw2104_frontend_attach(struct dvb_usb_adapter *d) +{ + if ((d->fe = dvb_attach(cx24116_attach, &dw2104_config, + &d->dev->i2c_adap)) != NULL) { + d->fe->ops.set_voltage = dw2102_set_voltage; + info("Attached cx24116!\n"); + return 0; + } + return -EIO; +} + static int dw2102_frontend_attach(struct dvb_usb_adapter *d) { d->fe = dvb_attach(stv0299_attach, &sharp_z0194a_config, @@ -249,6 +384,8 @@ static int dw2102_rc_query(struct dvb_usb_device *d, u32 *event, int *state) static struct usb_device_id dw2102_table[] = { {USB_DEVICE(USB_VID_CYPRESS, USB_PID_DW2102)}, {USB_DEVICE(USB_VID_CYPRESS, 0x2101)}, + {USB_DEVICE(USB_VID_CYPRESS, 0x2104)}, + {USB_DEVICE(0x9022, 0xd650)}, { } }; @@ -273,25 +410,23 @@ static int dw2102_load_firmware(struct usb_device *dev, return ret; } break; - case USB_PID_DW2102: + default: fw = frmwr; break; } - info("start downloading DW2102 firmware"); + info("start downloading DW210X firmware"); p = kmalloc(fw->size, GFP_KERNEL); reset = 1; /*stop the CPU*/ - dw2102_op_rw(dev, 0xa0, 0x7f92, &reset, 1, DW2102_WRITE_MSG); - dw2102_op_rw(dev, 0xa0, 0xe600, &reset, 1, DW2102_WRITE_MSG); + dw2102_op_rw(dev, 0xa0, 0x7f92, 0, &reset, 1, DW2102_WRITE_MSG); + dw2102_op_rw(dev, 0xa0, 0xe600, 0, &reset, 1, DW2102_WRITE_MSG); if (p != NULL) { memcpy(p, fw->data, fw->size); for (i = 0; i < fw->size; i += 0x40) { b = (u8 *) p + i; - if (dw2102_op_rw - (dev, 0xa0, i, b , 0x40, - DW2102_WRITE_MSG) != 0x40 - ) { + if (dw2102_op_rw(dev, 0xa0, i, 0, b , 0x40, + DW2102_WRITE_MSG) != 0x40) { err("error while transferring firmware"); ret = -EINVAL; break; @@ -299,43 +434,45 @@ static int dw2102_load_firmware(struct usb_device *dev, } /* restart the CPU */ reset = 0; - if (ret || dw2102_op_rw - (dev, 0xa0, 0x7f92, &reset, 1, - DW2102_WRITE_MSG) != 1) { + if (ret || dw2102_op_rw(dev, 0xa0, 0x7f92, 0, &reset, 1, + DW2102_WRITE_MSG) != 1) { err("could not restart the USB controller CPU."); ret = -EINVAL; } - if (ret || dw2102_op_rw - (dev, 0xa0, 0xe600, &reset, 1, - DW2102_WRITE_MSG) != 1) { + if (ret || dw2102_op_rw(dev, 0xa0, 0xe600, 0, &reset, 1, + DW2102_WRITE_MSG) != 1) { err("could not restart the USB controller CPU."); ret = -EINVAL; } /* init registers */ switch (dev->descriptor.idProduct) { + case USB_PID_DW2104: + case 0xd650: + reset = 1; + dw2102_op_rw(dev, 0xc4, 0x0000, 0, &reset, 1, + DW2102_WRITE_MSG); + reset = 0; + dw2102_op_rw(dev, 0xbf, 0x0040, 0, &reset, 0, + DW2102_WRITE_MSG); + break; case USB_PID_DW2102: - dw2102_op_rw - (dev, 0xbf, 0x0040, &reset, 0, - DW2102_WRITE_MSG); - dw2102_op_rw - (dev, 0xb9, 0x0000, &reset16[0], 2, - DW2102_READ_MSG); + dw2102_op_rw(dev, 0xbf, 0x0040, 0, &reset, 0, + DW2102_WRITE_MSG); + dw2102_op_rw(dev, 0xb9, 0x0000, 0, &reset16[0], 2, + DW2102_READ_MSG); break; case 0x2101: - dw2102_op_rw - (dev, 0xbc, 0x0030, &reset16[0], 2, - DW2102_READ_MSG); - dw2102_op_rw - (dev, 0xba, 0x0000, &reset16[0], 7, - DW2102_READ_MSG); - dw2102_op_rw - (dev, 0xba, 0x0000, &reset16[0], 7, - DW2102_READ_MSG); - dw2102_op_rw - (dev, 0xb9, 0x0000, &reset16[0], 2, - DW2102_READ_MSG); + dw2102_op_rw(dev, 0xbc, 0x0030, 0, &reset16[0], 2, + DW2102_READ_MSG); + dw2102_op_rw(dev, 0xba, 0x0000, 0, &reset16[0], 7, + DW2102_READ_MSG); + dw2102_op_rw(dev, 0xba, 0x0000, 0, &reset16[0], 7, + DW2102_READ_MSG); + dw2102_op_rw(dev, 0xb9, 0x0000, 0, &reset16[0], 2, + DW2102_READ_MSG); break; } + msleep(100); kfree(p); } return ret; @@ -358,7 +495,8 @@ static struct dvb_usb_device_properties dw2102_properties = { /* parameter for the MPEG2-data transfer */ .num_adapters = 1, .download_firmware = dw2102_load_firmware, - .adapter = { + .read_mac_address = dw2102_read_mac_address, + .adapter = { { .frontend_attach = dw2102_frontend_attach, .streaming_ctrl = NULL, @@ -388,11 +526,64 @@ static struct dvb_usb_device_properties dw2102_properties = { } }; +static struct dvb_usb_device_properties dw2104_properties = { + .caps = DVB_USB_IS_AN_I2C_ADAPTER, + .usb_ctrl = DEVICE_SPECIFIC, + .firmware = "dvb-usb-dw2104.fw", + .size_of_priv = sizeof(struct dw2102_state), + .no_reconnect = 1, + + .i2c_algo = &dw2104_i2c_algo, + .rc_key_map = dw2102_rc_keys, + .rc_key_map_size = ARRAY_SIZE(dw2102_rc_keys), + .rc_interval = 150, + .rc_query = dw2102_rc_query, + + .generic_bulk_ctrl_endpoint = 0x81, + /* parameter for the MPEG2-data transfer */ + .num_adapters = 1, + .download_firmware = dw2102_load_firmware, + .read_mac_address = dw2102_read_mac_address, + .adapter = { + { + .frontend_attach = dw2104_frontend_attach, + .streaming_ctrl = NULL, + /*.tuner_attach = dw2104_tuner_attach,*/ + .stream = { + .type = USB_BULK, + .count = 8, + .endpoint = 0x82, + .u = { + .bulk = { + .buffersize = 4096, + } + } + }, + } + }, + .num_device_descs = 2, + .devices = { + { "DVBWorld DW2104 USB2.0", + {&dw2102_table[2], NULL}, + {NULL}, + }, + { "TeVii S650 USB2.0", + {&dw2102_table[3], NULL}, + {NULL}, + }, + } +}; + static int dw2102_probe(struct usb_interface *intf, const struct usb_device_id *id) { - return dvb_usb_device_init(intf, &dw2102_properties, - THIS_MODULE, NULL, adapter_nr); + if (0 == dvb_usb_device_init(intf, &dw2102_properties, + THIS_MODULE, NULL, adapter_nr) || + 0 == dvb_usb_device_init(intf, &dw2104_properties, + THIS_MODULE, NULL, adapter_nr)) { + return 0; + } + return -ENODEV; } static struct usb_driver dw2102_driver = { @@ -420,6 +611,6 @@ module_init(dw2102_module_init); module_exit(dw2102_module_exit); MODULE_AUTHOR("Igor M. Liplianin (c) liplianin@me.by"); -MODULE_DESCRIPTION("Driver for DVBWorld DVB-S 2101 2102 USB2.0 device"); +MODULE_DESCRIPTION("Driver for DVBWorld DVB-S 2101, 2102, DVB-S2 2104 USB2.0 device"); MODULE_VERSION("0.1"); MODULE_LICENSE("GPL"); diff --git a/drivers/media/dvb/dvb-usb/dw2102.h b/drivers/media/dvb/dvb-usb/dw2102.h index 7a310f9..e337073 100644 --- a/drivers/media/dvb/dvb-usb/dw2102.h +++ b/drivers/media/dvb/dvb-usb/dw2102.h @@ -4,6 +4,5 @@ #define DVB_USB_LOG_PREFIX "dw2102" #include "dvb-usb.h" -extern int dvb_usb_dw2102_debug; #define deb_xfer(args...) dprintk(dvb_usb_dw2102_debug, 0x02, args) #endif -- cgit v0.10.2 From 4e54676895a867621f8451b8d97549172730997d Mon Sep 17 00:00:00 2001 From: "Igor M. Liplianin" Date: Tue, 9 Sep 2008 11:29:43 -0300 Subject: V4L/DVB (8992): Kconfig corrections for DVBWorld 2104 and TeVii S650 USB DVB-S2 cards Change menu item in Kconfig for DVBWorld 2104 and TeVii S650 USB DVB-S2 cards Signed-off-by: Igor M. Liplianin Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/dvb/dvb-usb/Kconfig b/drivers/media/dvb/dvb-usb/Kconfig index b35d7f0..aee3b5d 100644 --- a/drivers/media/dvb/dvb-usb/Kconfig +++ b/drivers/media/dvb/dvb-usb/Kconfig @@ -247,12 +247,14 @@ config DVB_USB_AF9005_REMOTE Afatech AF9005 based receiver. config DVB_USB_DW2102 - tristate "DvbWorld 2102 DVB-S USB2.0 receiver" + tristate "DvbWorld DVB-S/S2 USB2.0 support" depends on DVB_USB - select DVB_STV0299 if !DVB_FE_CUSTOMISE select DVB_PLL if !DVB_FE_CUSTOMISE + select DVB_STV0299 if !DVB_FE_CUSTOMISE + select DVB_CX24116 if !DVB_FE_CUSTOMISE help - Say Y here to support the DvbWorld 2102 DVB-S USB2.0 receiver. + Say Y here to support the DvbWorld DVB-S/S2 USB2.0 receivers + and the TeVii S650. config DVB_USB_ANYSEE tristate "Anysee DVB-T/C USB2.0 support" -- cgit v0.10.2 From 3f8e51add2b7d37f16343e6bdcc63862d87ccd04 Mon Sep 17 00:00:00 2001 From: "Igor M. Liplianin" Date: Tue, 9 Sep 2008 13:22:29 -0300 Subject: V4L/DVB (8993): cx24116: Fix lock for high (above 30000 kSyms) symbol rates cx24116: Fix lock for high (above 30000 kSyms) symbol rates Signed-off-by: Igor M. Liplianin Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/dvb/frontends/cx24116.c b/drivers/media/dvb/frontends/cx24116.c index 1402086..2ff9e20 100644 --- a/drivers/media/dvb/frontends/cx24116.c +++ b/drivers/media/dvb/frontends/cx24116.c @@ -30,6 +30,11 @@ * Sync with legacy version. * Some clean ups. */ +/* Updates by Igor Liplianin + * + * September, 9th 2008 + * Fixed locking on high symbol rates (>30000). + */ #include #include @@ -809,7 +814,7 @@ static int cx24116_set_frontend(struct dvb_frontend* fe, struct dvb_frontend_par struct tv_frontend_properties *c = &fe->tv_property_cache; struct cx24116_cmd cmd; fe_status_t tunerstat; - int ret; + int ret, above30msps; u8 retune=4; dprintk("%s()\n",__func__); @@ -839,6 +844,16 @@ static int cx24116_set_frontend(struct dvb_frontend* fe, struct dvb_frontend_par if (state->config->set_ts_params) state->config->set_ts_params(fe, 0); + above30msps = (state->dcur.symbol_rate > 30000000); + + if (above30msps){ + cx24116_writereg(state, 0xF9, 0x01); + cx24116_writereg(state, 0xF3, 0x44); + } else { + cx24116_writereg(state, 0xF9, 0x00); + cx24116_writereg(state, 0xF3, 0x46); + } + /* Prepare a tune request */ cmd.args[0x00] = CMD_TUNEREQUEST; @@ -866,11 +881,21 @@ static int cx24116_set_frontend(struct dvb_frontend* fe, struct dvb_frontend_par cmd.args[0x0b] = 0x00; cmd.args[0x0c] = 0x02; cmd.args[0x0d] = state->dcur.fec_mask; - cmd.args[0x0e] = 0x06; - cmd.args[0x0f] = 0x00; - cmd.args[0x10] = 0x00; - cmd.args[0x11] = 0xFA; - cmd.args[0x12] = 0x24; + + if (above30msps){ + cmd.args[0x0e] = 0x04; + cmd.args[0x0f] = 0x00; + cmd.args[0x10] = 0x01; + cmd.args[0x11] = 0x77; + cmd.args[0x12] = 0x36; + } else { + cmd.args[0x0e] = 0x06; + cmd.args[0x0f] = 0x00; + cmd.args[0x10] = 0x00; + cmd.args[0x11] = 0xFA; + cmd.args[0x12] = 0x24; + } + cmd.len= 0x13; /* We need to support pilot and non-pilot tuning in the -- cgit v0.10.2 From cc8c4f3a9c8dacff198438debd159ae4753744fc Mon Sep 17 00:00:00 2001 From: "Igor M. Liplianin" Date: Tue, 9 Sep 2008 13:57:47 -0300 Subject: V4L/DVB (8994): Adjust MPEG initialization in cx24116 Adjust MPEG initialization in cx24116 in order to accomodate different MPEG CLK position and polarity in different cards. Signed-off-by: Igor M. Liplianin Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/dvb/dvb-usb/dw2102.c b/drivers/media/dvb/dvb-usb/dw2102.c index 0f3f962..ad3d6fc 100644 --- a/drivers/media/dvb/dvb-usb/dw2102.c +++ b/drivers/media/dvb/dvb-usb/dw2102.c @@ -284,7 +284,7 @@ static int dw2102_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage) static struct cx24116_config dw2104_config = { .demod_address = 0x55, - /*.mpg_clk_pos_pol = 0x01,*/ + .mpg_clk_pos_pol = 0x01, }; static int dw2104_frontend_attach(struct dvb_usb_adapter *d) diff --git a/drivers/media/dvb/frontends/cx24116.c b/drivers/media/dvb/frontends/cx24116.c index 2ff9e20..666a0d8 100644 --- a/drivers/media/dvb/frontends/cx24116.c +++ b/drivers/media/dvb/frontends/cx24116.c @@ -478,7 +478,10 @@ static int cx24116_load_firmware (struct dvb_frontend* fe, const struct firmware cmd.args[0x01] = 0x01; cmd.args[0x02] = 0x75; cmd.args[0x03] = 0x00; - cmd.args[0x04] = 0x02; + if (state->config->mpg_clk_pos_pol) + cmd.args[0x04] = state->config->mpg_clk_pos_pol; + else + cmd.args[0x04] = 0x02; cmd.args[0x05] = 0x00; cmd.len= 0x06; ret = cx24116_cmd_execute(fe, &cmd); diff --git a/drivers/media/dvb/frontends/cx24116.h b/drivers/media/dvb/frontends/cx24116.h index 2789672..8dbcec2 100644 --- a/drivers/media/dvb/frontends/cx24116.h +++ b/drivers/media/dvb/frontends/cx24116.h @@ -33,6 +33,9 @@ struct cx24116_config /* Need to reset device during firmware loading */ int (*reset_device)(struct dvb_frontend* fe); + + /* Need to set MPEG parameters */ + u8 mpg_clk_pos_pol:0x02; }; #if defined(CONFIG_DVB_CX24116) || defined(CONFIG_DVB_CX24116_MODULE) -- cgit v0.10.2 From 56f0680a28397f4b412fc14f60ac380b910ee328 Mon Sep 17 00:00:00 2001 From: Steven Toth Date: Thu, 11 Sep 2008 10:19:27 -0300 Subject: V4L/DVB (8995): S2API: tv_ / TV_ to dtv_ / DTV_ namespace changes The group preferred dtv_ over tv_, this implements it. Signed-off-by: Steven Toth Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/dvb/dvb-core/dvb_frontend.c b/drivers/media/dvb/dvb-core/dvb_frontend.c index 620c620..9c47615 100644 --- a/drivers/media/dvb/dvb-core/dvb_frontend.c +++ b/drivers/media/dvb/dvb-core/dvb_frontend.c @@ -755,235 +755,235 @@ static int dvb_frontend_check_parameters(struct dvb_frontend *fe, return 0; } -struct tv_cmds_h tv_cmds[] = { - [TV_SEQ_UNDEFINED] = { - .name = "TV_SEQ_UNDEFINED", - .cmd = TV_SEQ_UNDEFINED, +struct dtv_cmds_h dtv_cmds[] = { + [DTV_SEQ_UNDEFINED] = { + .name = "DTV_SEQ_UNDEFINED", + .cmd = DTV_SEQ_UNDEFINED, .set = 1, }, - [TV_SEQ_START] = { - .name = "TV_SEQ_START", - .cmd = TV_SEQ_START, + [DTV_SEQ_START] = { + .name = "DTV_SEQ_START", + .cmd = DTV_SEQ_START, .set = 1, }, - [TV_SEQ_CONTINUE] = { - .name = "TV_SEQ_CONTINUE", - .cmd = TV_SEQ_CONTINUE, + [DTV_SEQ_CONTINUE] = { + .name = "DTV_SEQ_CONTINUE", + .cmd = DTV_SEQ_CONTINUE, .set = 1, }, - [TV_SEQ_COMPLETE] = { - .name = "TV_SEQ_COMPLETE", - .cmd = TV_SEQ_COMPLETE, + [DTV_SEQ_COMPLETE] = { + .name = "DTV_SEQ_COMPLETE", + .cmd = DTV_SEQ_COMPLETE, .set = 1, }, - [TV_SEQ_TERMINATE] = { - .name = "TV_SEQ_TERMINATE", - .cmd = TV_SEQ_TERMINATE, + [DTV_SEQ_TERMINATE] = { + .name = "DTV_SEQ_TERMINATE", + .cmd = DTV_SEQ_TERMINATE, .set = 1, }, /* Set */ - [TV_SET_FREQUENCY] = { - .name = "TV_SET_FREQUENCY", - .cmd = TV_SET_FREQUENCY, + [DTV_SET_FREQUENCY] = { + .name = "DTV_SET_FREQUENCY", + .cmd = DTV_SET_FREQUENCY, .set = 1, }, - [TV_SET_BANDWIDTH] = { - .name = "TV_SET_BANDWIDTH", - .cmd = TV_SET_BANDWIDTH, + [DTV_SET_BANDWIDTH] = { + .name = "DTV_SET_BANDWIDTH", + .cmd = DTV_SET_BANDWIDTH, .set = 1, }, - [TV_SET_MODULATION] = { - .name = "TV_SET_MODULATION", - .cmd = TV_SET_MODULATION, + [DTV_SET_MODULATION] = { + .name = "DTV_SET_MODULATION", + .cmd = DTV_SET_MODULATION, .set = 1, }, - [TV_SET_INVERSION] = { - .name = "TV_SET_INVERSION", - .cmd = TV_SET_INVERSION, + [DTV_SET_INVERSION] = { + .name = "DTV_SET_INVERSION", + .cmd = DTV_SET_INVERSION, .set = 1, }, - [TV_SET_DISEQC_MASTER] = { - .name = "TV_SET_DISEQC_MASTER", - .cmd = TV_SET_DISEQC_MASTER, + [DTV_SET_DISEQC_MASTER] = { + .name = "DTV_SET_DISEQC_MASTER", + .cmd = DTV_SET_DISEQC_MASTER, .set = 1, .buffer = 1, }, - [TV_SET_SYMBOLRATE] = { - .name = "TV_SET_SYMBOLRATE", - .cmd = TV_SET_SYMBOLRATE, + [DTV_SET_SYMBOLRATE] = { + .name = "DTV_SET_SYMBOLRATE", + .cmd = DTV_SET_SYMBOLRATE, .set = 1, }, - [TV_SET_INNERFEC] = { - .name = "TV_SET_INNERFEC", - .cmd = TV_SET_INNERFEC, + [DTV_SET_INNERFEC] = { + .name = "DTV_SET_INNERFEC", + .cmd = DTV_SET_INNERFEC, .set = 1, }, - [TV_SET_VOLTAGE] = { - .name = "TV_SET_VOLTAGE", - .cmd = TV_SET_VOLTAGE, + [DTV_SET_VOLTAGE] = { + .name = "DTV_SET_VOLTAGE", + .cmd = DTV_SET_VOLTAGE, .set = 1, }, - [TV_SET_TONE] = { - .name = "TV_SET_TONE", - .cmd = TV_SET_TONE, + [DTV_SET_TONE] = { + .name = "DTV_SET_TONE", + .cmd = DTV_SET_TONE, .set = 1, }, - [TV_SET_PILOT] = { - .name = "TV_SET_PILOT", - .cmd = TV_SET_PILOT, + [DTV_SET_PILOT] = { + .name = "DTV_SET_PILOT", + .cmd = DTV_SET_PILOT, .set = 1, }, - [TV_SET_ROLLOFF] = { - .name = "TV_SET_ROLLOFF", - .cmd = TV_SET_ROLLOFF, + [DTV_SET_ROLLOFF] = { + .name = "DTV_SET_ROLLOFF", + .cmd = DTV_SET_ROLLOFF, .set = 1, }, - [TV_SET_DELIVERY_SYSTEM] = { - .name = "TV_SET_DELIVERY_SYSTEM", - .cmd = TV_SET_DELIVERY_SYSTEM, + [DTV_SET_DELIVERY_SYSTEM] = { + .name = "DTV_SET_DELIVERY_SYSTEM", + .cmd = DTV_SET_DELIVERY_SYSTEM, .set = 1, }, - [TV_SET_ISDB_SEGMENT_NUM] = { - .name = "TV_SET_ISDB_SEGMENT_NUM", - .cmd = TV_SET_ISDB_SEGMENT_NUM, + [DTV_SET_ISDB_SEGMENT_NUM] = { + .name = "DTV_SET_ISDB_SEGMENT_NUM", + .cmd = DTV_SET_ISDB_SEGMENT_NUM, .set = 1, }, - [TV_SET_ISDB_SEGMENT_WIDTH] = { - .name = "TV_SET_ISDB_SEGMENT_WIDTH", - .cmd = TV_SET_ISDB_SEGMENT_WIDTH, + [DTV_SET_ISDB_SEGMENT_WIDTH] = { + .name = "DTV_SET_ISDB_SEGMENT_WIDTH", + .cmd = DTV_SET_ISDB_SEGMENT_WIDTH, .set = 1, }, /* Get */ - [TV_GET_FREQUENCY] = { - .name = "TV_GET_FREQUENCY", - .cmd = TV_GET_FREQUENCY, + [DTV_GET_FREQUENCY] = { + .name = "DTV_GET_FREQUENCY", + .cmd = DTV_GET_FREQUENCY, .set = 0, }, - [TV_GET_BANDWIDTH] = { - .name = "TV_GET_BANDWIDTH", - .cmd = TV_GET_BANDWIDTH, + [DTV_GET_BANDWIDTH] = { + .name = "DTV_GET_BANDWIDTH", + .cmd = DTV_GET_BANDWIDTH, .set = 0, }, - [TV_GET_MODULATION] = { - .name = "TV_GET_MODULATION", - .cmd = TV_GET_MODULATION, + [DTV_GET_MODULATION] = { + .name = "DTV_GET_MODULATION", + .cmd = DTV_GET_MODULATION, .set = 0, }, - [TV_GET_INVERSION] = { - .name = "TV_GET_INVERSION", - .cmd = TV_GET_INVERSION, + [DTV_GET_INVERSION] = { + .name = "DTV_GET_INVERSION", + .cmd = DTV_GET_INVERSION, .set = 0, }, - [TV_GET_DISEQC_SLAVE_REPLY] = { - .name = "TV_GET_DISEQC_SLAVE_REPLY", - .cmd = TV_GET_DISEQC_SLAVE_REPLY, + [DTV_GET_DISEQC_SLAVE_REPLY] = { + .name = "DTV_GET_DISEQC_SLAVE_REPLY", + .cmd = DTV_GET_DISEQC_SLAVE_REPLY, .set = 0, .buffer = 1, }, - [TV_GET_SYMBOLRATE] = { - .name = "TV_GET_SYMBOLRATE", - .cmd = TV_GET_SYMBOLRATE, + [DTV_GET_SYMBOLRATE] = { + .name = "DTV_GET_SYMBOLRATE", + .cmd = DTV_GET_SYMBOLRATE, .set = 0, }, - [TV_GET_INNERFEC] = { - .name = "TV_GET_INNERFEC", - .cmd = TV_GET_INNERFEC, + [DTV_GET_INNERFEC] = { + .name = "DTV_GET_INNERFEC", + .cmd = DTV_GET_INNERFEC, .set = 0, }, - [TV_GET_VOLTAGE] = { - .name = "TV_GET_VOLTAGE", - .cmd = TV_GET_VOLTAGE, + [DTV_GET_VOLTAGE] = { + .name = "DTV_GET_VOLTAGE", + .cmd = DTV_GET_VOLTAGE, .set = 0, }, - [TV_GET_TONE] = { - .name = "TV_GET_TONE", - .cmd = TV_GET_TONE, + [DTV_GET_TONE] = { + .name = "DTV_GET_TONE", + .cmd = DTV_GET_TONE, .set = 0, }, - [TV_GET_PILOT] = { - .name = "TV_GET_PILOT", - .cmd = TV_GET_PILOT, + [DTV_GET_PILOT] = { + .name = "DTV_GET_PILOT", + .cmd = DTV_GET_PILOT, .set = 0, }, - [TV_GET_ROLLOFF] = { - .name = "TV_GET_ROLLOFF", - .cmd = TV_GET_ROLLOFF, + [DTV_GET_ROLLOFF] = { + .name = "DTV_GET_ROLLOFF", + .cmd = DTV_GET_ROLLOFF, .set = 0, }, - [TV_GET_DELIVERY_SYSTEM] = { - .name = "TV_GET_DELIVERY_SYSTEM", - .cmd = TV_GET_DELIVERY_SYSTEM, + [DTV_GET_DELIVERY_SYSTEM] = { + .name = "DTV_GET_DELIVERY_SYSTEM", + .cmd = DTV_GET_DELIVERY_SYSTEM, .set = 0, }, - [TV_GET_ISDB_SEGMENT_NUM] = { - .name = "TV_GET_ISDB_SEGMENT_NUM", - .cmd = TV_GET_ISDB_SEGMENT_NUM, + [DTV_GET_ISDB_SEGMENT_NUM] = { + .name = "DTV_GET_ISDB_SEGMENT_NUM", + .cmd = DTV_GET_ISDB_SEGMENT_NUM, .set = 0, }, - [TV_GET_ISDB_SEGMENT_WIDTH] = { - .name = "TV_GET_ISDB_SEGMENT_WIDTH", - .cmd = TV_GET_ISDB_SEGMENT_WIDTH, + [DTV_GET_ISDB_SEGMENT_WIDTH] = { + .name = "DTV_GET_ISDB_SEGMENT_WIDTH", + .cmd = DTV_GET_ISDB_SEGMENT_WIDTH, .set = 0, }, - [TV_GET_ISDB_LAYERA_FEC] = { - .name = "TV_GET_ISDB_LAYERA_FEC", - .cmd = TV_GET_ISDB_LAYERA_FEC, + [DTV_GET_ISDB_LAYERA_FEC] = { + .name = "DTV_GET_ISDB_LAYERA_FEC", + .cmd = DTV_GET_ISDB_LAYERA_FEC, .set = 0, }, - [TV_GET_ISDB_LAYERA_MODULATION] = { - .name = "TV_GET_ISDB_LAYERA_MODULATION", - .cmd = TV_GET_ISDB_LAYERA_MODULATION, + [DTV_GET_ISDB_LAYERA_MODULATION] = { + .name = "DTV_GET_ISDB_LAYERA_MODULATION", + .cmd = DTV_GET_ISDB_LAYERA_MODULATION, .set = 0, }, - [TV_GET_ISDB_LAYERA_SEGMENT_WIDTH] = { - .name = "TV_GET_ISDB_LAYERA_SEGMENT_WIDTH", - .cmd = TV_GET_ISDB_LAYERA_SEGMENT_WIDTH, + [DTV_GET_ISDB_LAYERA_SEGMENT_WIDTH] = { + .name = "DTV_GET_ISDB_LAYERA_SEGMENT_WIDTH", + .cmd = DTV_GET_ISDB_LAYERA_SEGMENT_WIDTH, .set = 0, }, - [TV_GET_ISDB_LAYERB_FEC] = { - .name = "TV_GET_ISDB_LAYERB_FEC", - .cmd = TV_GET_ISDB_LAYERB_FEC, + [DTV_GET_ISDB_LAYERB_FEC] = { + .name = "DTV_GET_ISDB_LAYERB_FEC", + .cmd = DTV_GET_ISDB_LAYERB_FEC, .set = 0, }, - [TV_GET_ISDB_LAYERB_MODULATION] = { - .name = "TV_GET_ISDB_LAYERB_MODULATION", - .cmd = TV_GET_ISDB_LAYERB_MODULATION, + [DTV_GET_ISDB_LAYERB_MODULATION] = { + .name = "DTV_GET_ISDB_LAYERB_MODULATION", + .cmd = DTV_GET_ISDB_LAYERB_MODULATION, .set = 0, }, - [TV_GET_ISDB_LAYERB_SEGMENT_WIDTH] = { - .name = "TV_GET_ISDB_LAYERB_SEGMENT_WIDTH", - .cmd = TV_GET_ISDB_LAYERB_SEGMENT_WIDTH, + [DTV_GET_ISDB_LAYERB_SEGMENT_WIDTH] = { + .name = "DTV_GET_ISDB_LAYERB_SEGMENT_WIDTH", + .cmd = DTV_GET_ISDB_LAYERB_SEGMENT_WIDTH, .set = 0, }, - [TV_GET_ISDB_LAYERC_FEC] = { - .name = "TV_GET_ISDB_LAYERC_FEC", - .cmd = TV_GET_ISDB_LAYERC_FEC, + [DTV_GET_ISDB_LAYERC_FEC] = { + .name = "DTV_GET_ISDB_LAYERC_FEC", + .cmd = DTV_GET_ISDB_LAYERC_FEC, .set = 0, }, - [TV_GET_ISDB_LAYERC_MODULATION] = { - .name = "TV_GET_ISDB_LAYERC_MODULATION", - .cmd = TV_GET_ISDB_LAYERC_MODULATION, + [DTV_GET_ISDB_LAYERC_MODULATION] = { + .name = "DTV_GET_ISDB_LAYERC_MODULATION", + .cmd = DTV_GET_ISDB_LAYERC_MODULATION, .set = 0, }, - [TV_GET_ISDB_LAYERC_SEGMENT_WIDTH] = { - .name = "TV_GET_ISDB_LAYERC_SEGMENT_WIDTH", - .cmd = TV_GET_ISDB_LAYERC_SEGMENT_WIDTH, + [DTV_GET_ISDB_LAYERC_SEGMENT_WIDTH] = { + .name = "DTV_GET_ISDB_LAYERC_SEGMENT_WIDTH", + .cmd = DTV_GET_ISDB_LAYERC_SEGMENT_WIDTH, .set = 0, }, }; -void tv_property_dump(tv_property_t *tvp) +void dtv_property_dump(dtv_property_t *tvp) { int i; printk("%s() tvp.cmd = 0x%08x (%s)\n" ,__FUNCTION__ ,tvp->cmd - ,tv_cmds[ tvp->cmd ].name); + ,dtv_cmds[ tvp->cmd ].name); - if(tv_cmds[ tvp->cmd ].buffer) { + if(dtv_cmds[ tvp->cmd ].buffer) { printk("%s() tvp.u.buffer.len = 0x%02x\n" ,__FUNCTION__ @@ -1008,7 +1008,7 @@ int is_legacy_delivery_system(fe_delivery_system_t s) return 0; } -int tv_property_cache_submit(struct dvb_frontend *fe) +int dtv_property_cache_submit(struct dvb_frontend *fe) { /* We have to do one of two things: @@ -1036,7 +1036,7 @@ int tv_property_cache_submit(struct dvb_frontend *fe) int r; - struct tv_frontend_properties *c = &fe->tv_property_cache; + struct dtv_frontend_properties *c = &fe->dtv_property_cache; struct dvb_frontend_private *fepriv = fe->frontend_priv; struct dvb_frontend_parameters p; @@ -1115,7 +1115,7 @@ int tv_property_cache_submit(struct dvb_frontend *fe) case _16APSK: case NBC_QPSK: /* Just post a notification to the demod driver and let it pull - * the specific values it wants from its tv_property_cache. + * the specific values it wants from its dtv_property_cache. * It can decide how best to use those parameters. * IOCTL will call set_frontend (by default) due to zigzag * support etc. @@ -1161,147 +1161,147 @@ static int dvb_frontend_ioctl_legacy(struct inode *inode, struct file *file, static int dvb_frontend_ioctl_properties(struct inode *inode, struct file *file, unsigned int cmd, void *parg); -int tv_property_process(struct dvb_frontend *fe, tv_property_t *tvp, +int dtv_property_process(struct dvb_frontend *fe, dtv_property_t *tvp, struct inode *inode, struct file *file) { int r = 0; struct dvb_frontend_private *fepriv = fe->frontend_priv; printk("%s()\n", __FUNCTION__); - tv_property_dump(tvp); + dtv_property_dump(tvp); switch(tvp->cmd) { - case TV_SEQ_START: - case TV_SEQ_TERMINATE: + case DTV_SEQ_START: + case DTV_SEQ_TERMINATE: /* Reset a cache of data specific to the frontend here. This does * not effect hardware. */ printk("%s() Flushing property cache\n", __FUNCTION__); - memset(&fe->tv_property_cache, 0, sizeof(struct tv_frontend_properties)); - fe->tv_property_cache.state = TV_SEQ_START; - fe->tv_property_cache.delivery_system = SYS_UNDEFINED; + memset(&fe->dtv_property_cache, 0, sizeof(struct dtv_frontend_properties)); + fe->dtv_property_cache.state = DTV_SEQ_START; + fe->dtv_property_cache.delivery_system = SYS_UNDEFINED; break; - case TV_SEQ_COMPLETE: + case DTV_SEQ_COMPLETE: /* interpret the cache of data, build either a traditional frontend * tunerequest and submit it to a subset of the ioctl handler, * or, call a new undefined method on the frontend to deal with * all new tune requests. */ - fe->tv_property_cache.state = TV_SEQ_COMPLETE; + fe->dtv_property_cache.state = DTV_SEQ_COMPLETE; printk("%s() Finalised property cache\n", __FUNCTION__); - r |= tv_property_cache_submit(fe); + r |= dtv_property_cache_submit(fe); r |= dvb_frontend_ioctl_legacy(inode, file, FE_SET_FRONTEND, &fepriv->parameters); break; - case TV_SET_FREQUENCY: - fe->tv_property_cache.frequency = tvp->u.data; + case DTV_SET_FREQUENCY: + fe->dtv_property_cache.frequency = tvp->u.data; break; - case TV_GET_FREQUENCY: - tvp->u.data = fe->tv_property_cache.frequency; + case DTV_GET_FREQUENCY: + tvp->u.data = fe->dtv_property_cache.frequency; break; - case TV_SET_MODULATION: - fe->tv_property_cache.modulation = tvp->u.data; + case DTV_SET_MODULATION: + fe->dtv_property_cache.modulation = tvp->u.data; break; - case TV_GET_MODULATION: - tvp->u.data = fe->tv_property_cache.modulation; + case DTV_GET_MODULATION: + tvp->u.data = fe->dtv_property_cache.modulation; break; - case TV_SET_BANDWIDTH: - fe->tv_property_cache.bandwidth = tvp->u.data; + case DTV_SET_BANDWIDTH: + fe->dtv_property_cache.bandwidth = tvp->u.data; break; - case TV_GET_BANDWIDTH: - tvp->u.data = fe->tv_property_cache.bandwidth; + case DTV_GET_BANDWIDTH: + tvp->u.data = fe->dtv_property_cache.bandwidth; break; - case TV_SET_INVERSION: - fe->tv_property_cache.inversion = tvp->u.data; + case DTV_SET_INVERSION: + fe->dtv_property_cache.inversion = tvp->u.data; break; - case TV_GET_INVERSION: - tvp->u.data = fe->tv_property_cache.inversion; + case DTV_GET_INVERSION: + tvp->u.data = fe->dtv_property_cache.inversion; break; - case TV_SET_SYMBOLRATE: - fe->tv_property_cache.symbol_rate = tvp->u.data; + case DTV_SET_SYMBOLRATE: + fe->dtv_property_cache.symbol_rate = tvp->u.data; break; - case TV_GET_SYMBOLRATE: - tvp->u.data = fe->tv_property_cache.symbol_rate; + case DTV_GET_SYMBOLRATE: + tvp->u.data = fe->dtv_property_cache.symbol_rate; break; - case TV_SET_INNERFEC: - fe->tv_property_cache.fec_inner = tvp->u.data; + case DTV_SET_INNERFEC: + fe->dtv_property_cache.fec_inner = tvp->u.data; break; - case TV_GET_INNERFEC: - tvp->u.data = fe->tv_property_cache.fec_inner; + case DTV_GET_INNERFEC: + tvp->u.data = fe->dtv_property_cache.fec_inner; break; - case TV_SET_PILOT: - fe->tv_property_cache.pilot = tvp->u.data; + case DTV_SET_PILOT: + fe->dtv_property_cache.pilot = tvp->u.data; break; - case TV_GET_PILOT: - tvp->u.data = fe->tv_property_cache.pilot; + case DTV_GET_PILOT: + tvp->u.data = fe->dtv_property_cache.pilot; break; - case TV_SET_ROLLOFF: - fe->tv_property_cache.rolloff = tvp->u.data; + case DTV_SET_ROLLOFF: + fe->dtv_property_cache.rolloff = tvp->u.data; break; - case TV_GET_ROLLOFF: - tvp->u.data = fe->tv_property_cache.rolloff; + case DTV_GET_ROLLOFF: + tvp->u.data = fe->dtv_property_cache.rolloff; break; - case TV_SET_DELIVERY_SYSTEM: - fe->tv_property_cache.delivery_system = tvp->u.data; + case DTV_SET_DELIVERY_SYSTEM: + fe->dtv_property_cache.delivery_system = tvp->u.data; break; - case TV_GET_DELIVERY_SYSTEM: - tvp->u.data = fe->tv_property_cache.delivery_system; + case DTV_GET_DELIVERY_SYSTEM: + tvp->u.data = fe->dtv_property_cache.delivery_system; break; /* ISDB-T Support here */ - case TV_SET_ISDB_SEGMENT_NUM: - fe->tv_property_cache.isdb_segment_num = tvp->u.data; + case DTV_SET_ISDB_SEGMENT_NUM: + fe->dtv_property_cache.isdb_segment_num = tvp->u.data; break; - case TV_GET_ISDB_SEGMENT_NUM: - tvp->u.data = fe->tv_property_cache.isdb_segment_num; + case DTV_GET_ISDB_SEGMENT_NUM: + tvp->u.data = fe->dtv_property_cache.isdb_segment_num; break; - case TV_SET_ISDB_SEGMENT_WIDTH: - fe->tv_property_cache.isdb_segment_width = tvp->u.data; + case DTV_SET_ISDB_SEGMENT_WIDTH: + fe->dtv_property_cache.isdb_segment_width = tvp->u.data; break; - case TV_GET_ISDB_SEGMENT_WIDTH: - tvp->u.data = fe->tv_property_cache.isdb_segment_width; + case DTV_GET_ISDB_SEGMENT_WIDTH: + tvp->u.data = fe->dtv_property_cache.isdb_segment_width; break; - case TV_GET_ISDB_LAYERA_FEC: - tvp->u.data = fe->tv_property_cache.isdb_layera_fec; + case DTV_GET_ISDB_LAYERA_FEC: + tvp->u.data = fe->dtv_property_cache.isdb_layera_fec; break; - case TV_GET_ISDB_LAYERA_MODULATION: - tvp->u.data = fe->tv_property_cache.isdb_layera_modulation; + case DTV_GET_ISDB_LAYERA_MODULATION: + tvp->u.data = fe->dtv_property_cache.isdb_layera_modulation; break; - case TV_GET_ISDB_LAYERA_SEGMENT_WIDTH: - tvp->u.data = fe->tv_property_cache.isdb_layera_segment_width; + case DTV_GET_ISDB_LAYERA_SEGMENT_WIDTH: + tvp->u.data = fe->dtv_property_cache.isdb_layera_segment_width; break; - case TV_GET_ISDB_LAYERB_FEC: - tvp->u.data = fe->tv_property_cache.isdb_layerb_fec; + case DTV_GET_ISDB_LAYERB_FEC: + tvp->u.data = fe->dtv_property_cache.isdb_layerb_fec; break; - case TV_GET_ISDB_LAYERB_MODULATION: - tvp->u.data = fe->tv_property_cache.isdb_layerb_modulation; + case DTV_GET_ISDB_LAYERB_MODULATION: + tvp->u.data = fe->dtv_property_cache.isdb_layerb_modulation; break; - case TV_GET_ISDB_LAYERB_SEGMENT_WIDTH: - tvp->u.data = fe->tv_property_cache.isdb_layerb_segment_width; + case DTV_GET_ISDB_LAYERB_SEGMENT_WIDTH: + tvp->u.data = fe->dtv_property_cache.isdb_layerb_segment_width; break; - case TV_GET_ISDB_LAYERC_FEC: - tvp->u.data = fe->tv_property_cache.isdb_layerc_fec; + case DTV_GET_ISDB_LAYERC_FEC: + tvp->u.data = fe->dtv_property_cache.isdb_layerc_fec; break; - case TV_GET_ISDB_LAYERC_MODULATION: - tvp->u.data = fe->tv_property_cache.isdb_layerc_modulation; + case DTV_GET_ISDB_LAYERC_MODULATION: + tvp->u.data = fe->dtv_property_cache.isdb_layerc_modulation; break; - case TV_GET_ISDB_LAYERC_SEGMENT_WIDTH: - tvp->u.data = fe->tv_property_cache.isdb_layerc_segment_width; + case DTV_GET_ISDB_LAYERC_SEGMENT_WIDTH: + tvp->u.data = fe->dtv_property_cache.isdb_layerc_segment_width; break; - case TV_SET_VOLTAGE: - fe->tv_property_cache.voltage = tvp->u.data; + case DTV_SET_VOLTAGE: + fe->dtv_property_cache.voltage = tvp->u.data; r = dvb_frontend_ioctl_legacy(inode, file, FE_SET_VOLTAGE, - (void *)fe->tv_property_cache.voltage); + (void *)fe->dtv_property_cache.voltage); break; - case TV_GET_VOLTAGE: - tvp->u.data = fe->tv_property_cache.voltage; + case DTV_GET_VOLTAGE: + tvp->u.data = fe->dtv_property_cache.voltage; break; - case TV_SET_TONE: - fe->tv_property_cache.sectone = tvp->u.data; + case DTV_SET_TONE: + fe->dtv_property_cache.sectone = tvp->u.data; r = dvb_frontend_ioctl_legacy(inode, file, FE_SET_TONE, - (void *)fe->tv_property_cache.sectone); + (void *)fe->dtv_property_cache.sectone); break; - case TV_GET_TONE: - tvp->u.data = fe->tv_property_cache.sectone; + case DTV_GET_TONE: + tvp->u.data = fe->dtv_property_cache.sectone; break; } @@ -1344,7 +1344,7 @@ static int dvb_frontend_ioctl_properties(struct inode *inode, struct file *file, struct dvb_device *dvbdev = file->private_data; struct dvb_frontend *fe = dvbdev->priv; int err = -EOPNOTSUPP; - tv_property_t *tvp; + dtv_property_t *tvp; dprintk("%s\n", __func__); @@ -1355,14 +1355,14 @@ static int dvb_frontend_ioctl_properties(struct inode *inode, struct file *file, /* TODO: ioctl userdata out of range check here */ tvp = parg; - while(tvp->cmd != TV_SEQ_UNDEFINED) { - tv_property_process(fe, tvp, inode, file); - if( (tvp->cmd == TV_SEQ_TERMINATE) || (tvp->cmd == TV_SEQ_COMPLETE) ) + while(tvp->cmd != DTV_SEQ_UNDEFINED) { + dtv_property_process(fe, tvp, inode, file); + if( (tvp->cmd == DTV_SEQ_TERMINATE) || (tvp->cmd == DTV_SEQ_COMPLETE) ) break; tvp++; } - if(fe->tv_property_cache.state == TV_SEQ_COMPLETE) { + if(fe->dtv_property_cache.state == DTV_SEQ_COMPLETE) { printk("%s() Property cache is full, tuning\n", __FUNCTION__); } err = 0; @@ -1545,7 +1545,7 @@ static int dvb_frontend_ioctl_legacy(struct inode *inode, struct file *file, case FE_SET_FRONTEND: { struct dvb_frontend_tune_settings fetunesettings; - if(fe->tv_property_cache.state == TV_SEQ_COMPLETE) { + if(fe->dtv_property_cache.state == DTV_SEQ_COMPLETE) { if (dvb_frontend_check_parameters(fe, &fepriv->parameters) < 0) { err = -EINVAL; break; diff --git a/drivers/media/dvb/dvb-core/dvb_frontend.h b/drivers/media/dvb/dvb-core/dvb_frontend.h index 61d53ee..f376f28 100644 --- a/drivers/media/dvb/dvb-core/dvb_frontend.h +++ b/drivers/media/dvb/dvb-core/dvb_frontend.h @@ -170,8 +170,8 @@ struct dvb_frontend_ops { struct dvb_tuner_ops tuner_ops; struct analog_demod_ops analog_ops; - int (*set_property)(struct dvb_frontend* fe, tv_property_t* tvp); - int (*get_property)(struct dvb_frontend* fe, tv_property_t* tvp); + int (*set_property)(struct dvb_frontend* fe, dtv_property_t* tvp); + int (*get_property)(struct dvb_frontend* fe, dtv_property_t* tvp); int (*set_params)(struct dvb_frontend* fe); }; @@ -186,7 +186,7 @@ struct dvb_fe_events { struct mutex mtx; }; -struct tv_frontend_properties { +struct dtv_frontend_properties { /* Cache State */ u32 state; @@ -233,7 +233,7 @@ struct dvb_frontend { void *frontend_priv; void *sec_priv; void *analog_demod_priv; - struct tv_frontend_properties tv_property_cache; + struct dtv_frontend_properties dtv_property_cache; }; extern int dvb_register_frontend(struct dvb_adapter *dvb, diff --git a/drivers/media/dvb/frontends/cx24116.c b/drivers/media/dvb/frontends/cx24116.c index 666a0d8..f150fa2 100644 --- a/drivers/media/dvb/frontends/cx24116.c +++ b/drivers/media/dvb/frontends/cx24116.c @@ -776,7 +776,7 @@ error: static int cx24116_get_params(struct dvb_frontend* fe) { struct cx24116_state *state = fe->demodulator_priv; - struct tv_frontend_properties *cache = &fe->tv_property_cache; + struct dtv_frontend_properties *cache = &fe->dtv_property_cache; dprintk("%s()\n",__func__); @@ -796,7 +796,7 @@ static int cx24116_initfe(struct dvb_frontend* fe) return cx24116_diseqc_init(fe); } -static int cx24116_set_property(struct dvb_frontend *fe, tv_property_t* tvp) +static int cx24116_set_property(struct dvb_frontend *fe, dtv_property_t* tvp) { dprintk("%s(..)\n", __func__); return 0; @@ -814,7 +814,7 @@ static int cx24116_set_params(struct dvb_frontend *fe) static int cx24116_set_frontend(struct dvb_frontend* fe, struct dvb_frontend_parameters *p) { struct cx24116_state *state = fe->demodulator_priv; - struct tv_frontend_properties *c = &fe->tv_property_cache; + struct dtv_frontend_properties *c = &fe->dtv_property_cache; struct cx24116_cmd cmd; fe_status_t tunerstat; int ret, above30msps; diff --git a/include/linux/dvb/frontend.h b/include/linux/dvb/frontend.h index 4d37700..aeace74 100644 --- a/include/linux/dvb/frontend.h +++ b/include/linux/dvb/frontend.h @@ -250,61 +250,61 @@ struct dvb_frontend_event { * don't insert random new commands and break backwards * binary compatability. */ -typedef enum tv_cmd_types { - TV_SEQ_UNDEFINED, - TV_SEQ_START, - TV_SEQ_CONTINUE, - TV_SEQ_COMPLETE, - TV_SEQ_TERMINATE, - - TV_SET_FREQUENCY, - TV_SET_MODULATION, - TV_SET_BANDWIDTH, - TV_SET_INVERSION, - TV_SET_DISEQC_MASTER, - TV_SET_SYMBOLRATE, - TV_SET_INNERFEC, - TV_SET_VOLTAGE, - TV_SET_TONE, - TV_SET_PILOT, - TV_SET_ROLLOFF, - - TV_GET_FREQUENCY, - TV_GET_MODULATION, - TV_GET_BANDWIDTH, - TV_GET_INVERSION, - TV_GET_DISEQC_SLAVE_REPLY, - TV_GET_SYMBOLRATE, - TV_GET_INNERFEC, - TV_GET_VOLTAGE, - TV_GET_TONE, - TV_GET_PILOT, - TV_GET_ROLLOFF, +typedef enum dtv_cmd_types { + DTV_SEQ_UNDEFINED, + DTV_SEQ_START, + DTV_SEQ_CONTINUE, + DTV_SEQ_COMPLETE, + DTV_SEQ_TERMINATE, + + DTV_SET_FREQUENCY, + DTV_SET_MODULATION, + DTV_SET_BANDWIDTH, + DTV_SET_INVERSION, + DTV_SET_DISEQC_MASTER, + DTV_SET_SYMBOLRATE, + DTV_SET_INNERFEC, + DTV_SET_VOLTAGE, + DTV_SET_TONE, + DTV_SET_PILOT, + DTV_SET_ROLLOFF, + + DTV_GET_FREQUENCY, + DTV_GET_MODULATION, + DTV_GET_BANDWIDTH, + DTV_GET_INVERSION, + DTV_GET_DISEQC_SLAVE_REPLY, + DTV_GET_SYMBOLRATE, + DTV_GET_INNERFEC, + DTV_GET_VOLTAGE, + DTV_GET_TONE, + DTV_GET_PILOT, + DTV_GET_ROLLOFF, /* Basic enumeration set for querying unlimited capabilities */ - TV_GET_FE_CAPABILITY_COUNT, - TV_GET_FE_CAPABILITY, + DTV_GET_FE_CAPABILITY_COUNT, + DTV_GET_FE_CAPABILITY, /* New commands are always appended */ - TV_SET_DELIVERY_SYSTEM, - TV_GET_DELIVERY_SYSTEM, + DTV_SET_DELIVERY_SYSTEM, + DTV_GET_DELIVERY_SYSTEM, /* ISDB-T */ - TV_SET_ISDB_SEGMENT_NUM, - TV_GET_ISDB_SEGMENT_NUM, - TV_SET_ISDB_SEGMENT_WIDTH, - TV_GET_ISDB_SEGMENT_WIDTH, - TV_GET_ISDB_LAYERA_FEC, - TV_GET_ISDB_LAYERA_MODULATION, - TV_GET_ISDB_LAYERA_SEGMENT_WIDTH, - TV_GET_ISDB_LAYERB_FEC, - TV_GET_ISDB_LAYERB_MODULATION, - TV_GET_ISDB_LAYERB_SEGMENT_WIDTH, - TV_GET_ISDB_LAYERC_FEC, - TV_GET_ISDB_LAYERC_MODULATION, - TV_GET_ISDB_LAYERC_SEGMENT_WIDTH, - -} tv_cmd_types_t; + DTV_SET_ISDB_SEGMENT_NUM, + DTV_GET_ISDB_SEGMENT_NUM, + DTV_SET_ISDB_SEGMENT_WIDTH, + DTV_GET_ISDB_SEGMENT_WIDTH, + DTV_GET_ISDB_LAYERA_FEC, + DTV_GET_ISDB_LAYERA_MODULATION, + DTV_GET_ISDB_LAYERA_SEGMENT_WIDTH, + DTV_GET_ISDB_LAYERB_FEC, + DTV_GET_ISDB_LAYERB_MODULATION, + DTV_GET_ISDB_LAYERB_SEGMENT_WIDTH, + DTV_GET_ISDB_LAYERC_FEC, + DTV_GET_ISDB_LAYERC_MODULATION, + DTV_GET_ISDB_LAYERC_SEGMENT_WIDTH, + +} dtv_cmd_types_t; typedef enum fe_pilot { PILOT_ON, @@ -337,7 +337,7 @@ typedef enum fe_delivery_system { SYS_DAB, } fe_delivery_system_t; -struct tv_cmds_h { +struct dtv_cmds_h { char *name; /* A display name for debugging purposes */ __u32 cmd; /* A unique ID */ @@ -357,13 +357,13 @@ typedef struct { __u32 len; } buffer; } u; -} tv_property_t; +} dtv_property_t; /* No more than 16 properties during any given ioctl */ -typedef tv_property_t tv_properties_t[16]; +typedef dtv_property_t dtv_properties_t[16]; -#define FE_SET_PROPERTY _IOW('o', 82, tv_properties_t) -#define FE_GET_PROPERTY _IOR('o', 83, tv_properties_t) +#define FE_SET_PROPERTY _IOW('o', 82, dtv_properties_t) +#define FE_GET_PROPERTY _IOR('o', 83, dtv_properties_t) /** -- cgit v0.10.2 From e7fee0f3aa111d42cdcfc1470cfdc21dde0cdbe2 Mon Sep 17 00:00:00 2001 From: Steven Toth Date: Thu, 11 Sep 2008 10:23:01 -0300 Subject: V4L/DVB (8996): S2API: typedefs replaced, _SEQ_'s removed, fixed 16 command arrays replaced After discussion the following changes were made: 1. Removed the typedefs in frontend.h, use structures. 2. In the frontend.h, remove the 16 command limit on the API and switch to a flexible variable length API. For practical reasons a #define limits this to 64, this should be discussed. 3. Changed dvb-core ioctl handing to deal with variable sequences of commands. tune-v0.0.3.c is required to use this API, it contains the interface changes. Signed-off-by: Steven Toth Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/dvb/dvb-core/dvb_frontend.c b/drivers/media/dvb/dvb-core/dvb_frontend.c index 9c47615..763da96 100644 --- a/drivers/media/dvb/dvb-core/dvb_frontend.c +++ b/drivers/media/dvb/dvb-core/dvb_frontend.c @@ -756,29 +756,14 @@ static int dvb_frontend_check_parameters(struct dvb_frontend *fe, } struct dtv_cmds_h dtv_cmds[] = { - [DTV_SEQ_UNDEFINED] = { - .name = "DTV_SEQ_UNDEFINED", - .cmd = DTV_SEQ_UNDEFINED, + [DTV_TUNE] = { + .name = "DTV_TUNE", + .cmd = DTV_TUNE, .set = 1, }, - [DTV_SEQ_START] = { - .name = "DTV_SEQ_START", - .cmd = DTV_SEQ_START, - .set = 1, - }, - [DTV_SEQ_CONTINUE] = { - .name = "DTV_SEQ_CONTINUE", - .cmd = DTV_SEQ_CONTINUE, - .set = 1, - }, - [DTV_SEQ_COMPLETE] = { - .name = "DTV_SEQ_COMPLETE", - .cmd = DTV_SEQ_COMPLETE, - .set = 1, - }, - [DTV_SEQ_TERMINATE] = { - .name = "DTV_SEQ_TERMINATE", - .cmd = DTV_SEQ_TERMINATE, + [DTV_CLEAR] = { + .name = "DTV_CLEAR", + .cmd = DTV_CLEAR, .set = 1, }, @@ -974,7 +959,7 @@ struct dtv_cmds_h dtv_cmds[] = { }, }; -void dtv_property_dump(dtv_property_t *tvp) +void dtv_property_dump(struct dtv_property *tvp) { int i; @@ -1044,6 +1029,7 @@ int dtv_property_cache_submit(struct dvb_frontend *fe) /* For legacy delivery systems we don't need the delivery_system to be specified */ if(is_legacy_delivery_system(c->delivery_system)) { + printk("%s() legacy, modulation = %d\n", __FUNCTION__, c->modulation); switch(c->modulation) { case QPSK: printk("%s() Preparing QPSK req\n", __FUNCTION__); @@ -1161,7 +1147,7 @@ static int dvb_frontend_ioctl_legacy(struct inode *inode, struct file *file, static int dvb_frontend_ioctl_properties(struct inode *inode, struct file *file, unsigned int cmd, void *parg); -int dtv_property_process(struct dvb_frontend *fe, dtv_property_t *tvp, +int dtv_property_process(struct dvb_frontend *fe, struct dtv_property *tvp, struct inode *inode, struct file *file) { int r = 0; @@ -1170,23 +1156,22 @@ int dtv_property_process(struct dvb_frontend *fe, dtv_property_t *tvp, dtv_property_dump(tvp); switch(tvp->cmd) { - case DTV_SEQ_START: - case DTV_SEQ_TERMINATE: + case DTV_CLEAR: /* Reset a cache of data specific to the frontend here. This does * not effect hardware. */ printk("%s() Flushing property cache\n", __FUNCTION__); memset(&fe->dtv_property_cache, 0, sizeof(struct dtv_frontend_properties)); - fe->dtv_property_cache.state = DTV_SEQ_START; + fe->dtv_property_cache.state = tvp->cmd; fe->dtv_property_cache.delivery_system = SYS_UNDEFINED; break; - case DTV_SEQ_COMPLETE: + case DTV_TUNE: /* interpret the cache of data, build either a traditional frontend * tunerequest and submit it to a subset of the ioctl handler, * or, call a new undefined method on the frontend to deal with * all new tune requests. */ - fe->dtv_property_cache.state = DTV_SEQ_COMPLETE; + fe->dtv_property_cache.state = tvp->cmd; printk("%s() Finalised property cache\n", __FUNCTION__); r |= dtv_property_cache_submit(fe); r |= dvb_frontend_ioctl_legacy(inode, file, FE_SET_FRONTEND, @@ -1344,30 +1329,48 @@ static int dvb_frontend_ioctl_properties(struct inode *inode, struct file *file, struct dvb_device *dvbdev = file->private_data; struct dvb_frontend *fe = dvbdev->priv; int err = -EOPNOTSUPP; - dtv_property_t *tvp; + + struct dtv_properties *tvps = NULL; + struct dtv_property *tvp = NULL; + int i; dprintk("%s\n", __func__); if(cmd == FE_SET_PROPERTY) { printk("%s() FE_SET_PROPERTY\n", __FUNCTION__); - /* TODO: basic property validation here */ + tvps = (struct dtv_properties __user *)parg; - /* TODO: ioctl userdata out of range check here */ - tvp = parg; - while(tvp->cmd != DTV_SEQ_UNDEFINED) { - dtv_property_process(fe, tvp, inode, file); - if( (tvp->cmd == DTV_SEQ_TERMINATE) || (tvp->cmd == DTV_SEQ_COMPLETE) ) - break; - tvp++; + printk("%s() properties.num = %d\n", __FUNCTION__, tvps->num); + printk("%s() properties.props = %p\n", __FUNCTION__, tvps->props); + + /* Put an arbitrary limit on the number of messages that can + * be sent at once */ + if (tvps->num > DTV_IOCTL_MAX_MSGS) + return -EINVAL; + + tvp = (struct dtv_property *) kmalloc(tvps->num * + sizeof(struct dtv_property), GFP_KERNEL); + if (!tvp) { + err = -ENOMEM; + goto out; } - if(fe->dtv_property_cache.state == DTV_SEQ_COMPLETE) { + if (copy_from_user(tvp, tvps->props, tvps->num * sizeof(struct dtv_property))) { + err = -EFAULT; + goto out; + } + + for (i = 0; i < tvps->num; i++) + dtv_property_process(fe, tvp + i, inode, file); + + if(fe->dtv_property_cache.state == DTV_TUNE) { printk("%s() Property cache is full, tuning\n", __FUNCTION__); } err = 0; } - +out: + kfree(tvp); return err; } @@ -1545,7 +1548,7 @@ static int dvb_frontend_ioctl_legacy(struct inode *inode, struct file *file, case FE_SET_FRONTEND: { struct dvb_frontend_tune_settings fetunesettings; - if(fe->dtv_property_cache.state == DTV_SEQ_COMPLETE) { + if(fe->dtv_property_cache.state == DTV_TUNE) { if (dvb_frontend_check_parameters(fe, &fepriv->parameters) < 0) { err = -EINVAL; break; diff --git a/drivers/media/dvb/dvb-core/dvb_frontend.h b/drivers/media/dvb/dvb-core/dvb_frontend.h index f376f28..85d3020 100644 --- a/drivers/media/dvb/dvb-core/dvb_frontend.h +++ b/drivers/media/dvb/dvb-core/dvb_frontend.h @@ -170,8 +170,8 @@ struct dvb_frontend_ops { struct dvb_tuner_ops tuner_ops; struct analog_demod_ops analog_ops; - int (*set_property)(struct dvb_frontend* fe, dtv_property_t* tvp); - int (*get_property)(struct dvb_frontend* fe, dtv_property_t* tvp); + int (*set_property)(struct dvb_frontend* fe, struct dtv_property* tvp); + int (*get_property)(struct dvb_frontend* fe, struct dtv_property* tvp); int (*set_params)(struct dvb_frontend* fe); }; diff --git a/drivers/media/dvb/frontends/cx24116.c b/drivers/media/dvb/frontends/cx24116.c index f150fa2..9f93930 100644 --- a/drivers/media/dvb/frontends/cx24116.c +++ b/drivers/media/dvb/frontends/cx24116.c @@ -796,7 +796,7 @@ static int cx24116_initfe(struct dvb_frontend* fe) return cx24116_diseqc_init(fe); } -static int cx24116_set_property(struct dvb_frontend *fe, dtv_property_t* tvp) +static int cx24116_set_property(struct dvb_frontend *fe, struct dtv_property* tvp) { dprintk("%s(..)\n", __func__); return 0; diff --git a/include/linux/dvb/frontend.h b/include/linux/dvb/frontend.h index aeace74..f667bf3 100644 --- a/include/linux/dvb/frontend.h +++ b/include/linux/dvb/frontend.h @@ -251,11 +251,8 @@ struct dvb_frontend_event { * binary compatability. */ typedef enum dtv_cmd_types { - DTV_SEQ_UNDEFINED, - DTV_SEQ_START, - DTV_SEQ_CONTINUE, - DTV_SEQ_COMPLETE, - DTV_SEQ_TERMINATE, + DTV_TUNE, + DTV_CLEAR, DTV_SET_FREQUENCY, DTV_SET_MODULATION, @@ -348,22 +345,32 @@ struct dtv_cmds_h { __u32 reserved:30; /* Align */ }; -typedef struct { +struct dtv_property { __u32 cmd; + __u32 reserved[3]; union { + __s32 valuemin; + __s32 valuemax; __u32 data; struct { __u8 data[32]; __u32 len; + __u32 reserved1[3]; + void *reserved2; } buffer; } u; -} dtv_property_t; +} __attribute__ ((packed)); /* No more than 16 properties during any given ioctl */ -typedef dtv_property_t dtv_properties_t[16]; +struct dtv_properties { + __u32 num; + struct dtv_property *props; +}; + +#define DTV_IOCTL_MAX_MSGS 64 -#define FE_SET_PROPERTY _IOW('o', 82, dtv_properties_t) -#define FE_GET_PROPERTY _IOR('o', 83, dtv_properties_t) +#define FE_SET_PROPERTY _IOW('o', 82, struct dtv_properties) +#define FE_GET_PROPERTY _IOR('o', 83, struct dtv_properties) /** -- cgit v0.10.2 From 177b868d93861077619261dcecd0147d1c033026 Mon Sep 17 00:00:00 2001 From: Steven Toth Date: Thu, 11 Sep 2008 10:34:19 -0300 Subject: V4L/DVB (8997): S2API: Cleanup SYMBOLRATE, INNERFEC -> SYMBOL_RATE, INNER_FEC This is now consistent with the existing API. Signed-off-by: Steven Toth Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/dvb/dvb-core/dvb_frontend.c b/drivers/media/dvb/dvb-core/dvb_frontend.c index 763da96..ce1de40 100644 --- a/drivers/media/dvb/dvb-core/dvb_frontend.c +++ b/drivers/media/dvb/dvb-core/dvb_frontend.c @@ -794,14 +794,14 @@ struct dtv_cmds_h dtv_cmds[] = { .set = 1, .buffer = 1, }, - [DTV_SET_SYMBOLRATE] = { - .name = "DTV_SET_SYMBOLRATE", - .cmd = DTV_SET_SYMBOLRATE, + [DTV_SET_SYMBOL_RATE] = { + .name = "DTV_SET_SYMBOL_RATE", + .cmd = DTV_SET_SYMBOL_RATE, .set = 1, }, - [DTV_SET_INNERFEC] = { - .name = "DTV_SET_INNERFEC", - .cmd = DTV_SET_INNERFEC, + [DTV_SET_INNER_FEC] = { + .name = "DTV_SET_INNER_FEC", + .cmd = DTV_SET_INNER_FEC, .set = 1, }, [DTV_SET_VOLTAGE] = { @@ -867,14 +867,14 @@ struct dtv_cmds_h dtv_cmds[] = { .set = 0, .buffer = 1, }, - [DTV_GET_SYMBOLRATE] = { - .name = "DTV_GET_SYMBOLRATE", - .cmd = DTV_GET_SYMBOLRATE, + [DTV_GET_SYMBOL_RATE] = { + .name = "DTV_GET_SYMBOL_RATE", + .cmd = DTV_GET_SYMBOL_RATE, .set = 0, }, - [DTV_GET_INNERFEC] = { - .name = "DTV_GET_INNERFEC", - .cmd = DTV_GET_INNERFEC, + [DTV_GET_INNER_FEC] = { + .name = "DTV_GET_INNER_FEC", + .cmd = DTV_GET_INNER_FEC, .set = 0, }, [DTV_GET_VOLTAGE] = { @@ -1201,16 +1201,16 @@ int dtv_property_process(struct dvb_frontend *fe, struct dtv_property *tvp, case DTV_GET_INVERSION: tvp->u.data = fe->dtv_property_cache.inversion; break; - case DTV_SET_SYMBOLRATE: + case DTV_SET_SYMBOL_RATE: fe->dtv_property_cache.symbol_rate = tvp->u.data; break; - case DTV_GET_SYMBOLRATE: + case DTV_GET_SYMBOL_RATE: tvp->u.data = fe->dtv_property_cache.symbol_rate; break; - case DTV_SET_INNERFEC: + case DTV_SET_INNER_FEC: fe->dtv_property_cache.fec_inner = tvp->u.data; break; - case DTV_GET_INNERFEC: + case DTV_GET_INNER_FEC: tvp->u.data = fe->dtv_property_cache.fec_inner; break; case DTV_SET_PILOT: diff --git a/include/linux/dvb/frontend.h b/include/linux/dvb/frontend.h index f667bf3..bfd670f 100644 --- a/include/linux/dvb/frontend.h +++ b/include/linux/dvb/frontend.h @@ -259,8 +259,8 @@ typedef enum dtv_cmd_types { DTV_SET_BANDWIDTH, DTV_SET_INVERSION, DTV_SET_DISEQC_MASTER, - DTV_SET_SYMBOLRATE, - DTV_SET_INNERFEC, + DTV_SET_SYMBOL_RATE, + DTV_SET_INNER_FEC, DTV_SET_VOLTAGE, DTV_SET_TONE, DTV_SET_PILOT, @@ -271,8 +271,8 @@ typedef enum dtv_cmd_types { DTV_GET_BANDWIDTH, DTV_GET_INVERSION, DTV_GET_DISEQC_SLAVE_REPLY, - DTV_GET_SYMBOLRATE, - DTV_GET_INNERFEC, + DTV_GET_SYMBOL_RATE, + DTV_GET_INNER_FEC, DTV_GET_VOLTAGE, DTV_GET_TONE, DTV_GET_PILOT, -- cgit v0.10.2 From 65af619d84ee2d3a1faacbbeded374d0b313d3a9 Mon Sep 17 00:00:00 2001 From: Steven Toth Date: Thu, 11 Sep 2008 21:08:59 -0300 Subject: V4L/DVB (8998): s2api: restore DTV_UNDEFINED Signed-off-by: Steven Toth Signed-off-by: Michael Krufky Signed-off-by: Mauro Carvalho Chehab diff --git a/include/linux/dvb/frontend.h b/include/linux/dvb/frontend.h index bfd670f..915edd3 100644 --- a/include/linux/dvb/frontend.h +++ b/include/linux/dvb/frontend.h @@ -251,6 +251,7 @@ struct dvb_frontend_event { * binary compatability. */ typedef enum dtv_cmd_types { + DTV_UNDEFINED, DTV_TUNE, DTV_CLEAR, -- cgit v0.10.2 From ee33c525c4d09756156cd4c18e6586da900eb310 Mon Sep 17 00:00:00 2001 From: Steven Toth Date: Thu, 11 Sep 2008 23:52:32 -0300 Subject: V4L/DVB (8999): S2API: Reduce demod driver complexity by using a cache sync For demod drivers, we want a single tuning function (set_frontend) to have access to the properly constructed dvb_frontend_parameters structure, or the cache values - regardless of whether the legacy or new API is being used. This cuts down on redundant code in the demod drivers and ensures the tuning parameters are consistent regardless of the API entry type. Signed-off-by: Steven Toth Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/dvb/dvb-core/dvb_frontend.c b/drivers/media/dvb/dvb-core/dvb_frontend.c index ce1de40..7e9cd79 100644 --- a/drivers/media/dvb/dvb-core/dvb_frontend.c +++ b/drivers/media/dvb/dvb-core/dvb_frontend.c @@ -993,6 +993,42 @@ int is_legacy_delivery_system(fe_delivery_system_t s) return 0; } +/* Synchronise the legacy tuning parameters into the cache, so that demodulator + * drivers can use a single set_frontend tuning function, regardless of whether + * it's being used for the legacy or new API, reducing code and complexity. + */ +void dtv_property_cache_sync(struct dvb_frontend *fe, struct dvb_frontend_parameters *p) +{ + struct dtv_frontend_properties *c = &fe->dtv_property_cache; + + c->frequency = p->frequency; + c->inversion = p->inversion; + + switch (fe->ops.info.type) { + case FE_QPSK: + c->symbol_rate = p->u.qpsk.symbol_rate; + c->fec_inner = p->u.qpsk.fec_inner; + break; + case FE_QAM: + c->symbol_rate = p->u.qam.symbol_rate; + c->fec_inner = p->u.qam.fec_inner; + c->modulation = p->u.qam.modulation; + break; + case FE_OFDM: + c->bandwidth = p->u.ofdm.bandwidth; + c->code_rate_HP = p->u.ofdm.code_rate_HP; + c->code_rate_LP = p->u.ofdm.code_rate_LP; + c->modulation = p->u.ofdm.constellation; + c->transmission_mode = p->u.ofdm.transmission_mode; + c->guard_interval = p->u.ofdm.guard_interval; + c->hierarchy = p->u.ofdm.hierarchy_information; + break; + case FE_ATSC: + c->modulation = p->u.vsb.modulation; + break; + } +} + int dtv_property_cache_submit(struct dvb_frontend *fe) { @@ -1548,6 +1584,8 @@ static int dvb_frontend_ioctl_legacy(struct inode *inode, struct file *file, case FE_SET_FRONTEND: { struct dvb_frontend_tune_settings fetunesettings; + dtv_property_cache_sync(fe, &fepriv->parameters); + if(fe->dtv_property_cache.state == DTV_TUNE) { if (dvb_frontend_check_parameters(fe, &fepriv->parameters) < 0) { err = -EINVAL; -- cgit v0.10.2 From d5748f1079c01c8861b05e0de7c4cda271532cb9 Mon Sep 17 00:00:00 2001 From: Steven Toth Date: Fri, 12 Sep 2008 00:27:13 -0300 Subject: V4L/DVB (9000): S2API: Cleanup code that prepares tuning structures. Signed-off-by: Steven Toth Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/dvb/dvb-core/dvb_frontend.c b/drivers/media/dvb/dvb-core/dvb_frontend.c index 7e9cd79..2aaaca6 100644 --- a/drivers/media/dvb/dvb-core/dvb_frontend.c +++ b/drivers/media/dvb/dvb-core/dvb_frontend.c @@ -1001,6 +1001,8 @@ void dtv_property_cache_sync(struct dvb_frontend *fe, struct dvb_frontend_parame { struct dtv_frontend_properties *c = &fe->dtv_property_cache; + printk("%s()\n", __FUNCTION__); + c->frequency = p->frequency; c->inversion = p->inversion; @@ -1029,153 +1031,114 @@ void dtv_property_cache_sync(struct dvb_frontend *fe, struct dvb_frontend_parame } } -int dtv_property_cache_submit(struct dvb_frontend *fe) +/* Ensure the cached values are set correctly in the frontend + * legacy tuning structures, for the advanced tuning API. + */ +void dtv_property_legacy_params_sync(struct dvb_frontend *fe) { + struct dtv_frontend_properties *c = &fe->dtv_property_cache; + struct dvb_frontend_private *fepriv = fe->frontend_priv; + struct dvb_frontend_parameters *p = &fepriv->parameters; - /* We have to do one of two things: - * To support legacy devices using the new API we take values from - * the tv_cache and generate a legacy truning structure. - * - * Or, - * - * To support advanced tuning devices with the new API we - * notify the new advance driver type that a tuning operation is required - * and let it pull values from the cache as is, we don't need to - * pass structures. - * - * We'll use the modulation type to assess how this is handled. as the API - * progresses we'll probably want to have a flag in dvb_frontend_ops - * to allow the frontend driver to dictate how it likes to be tuned. - * - * Because of how this is attached to the ioctl handler for legacy support, - * it's important to return an appropriate result code with atleast the following - * three meanings: - * < 0 = processing error - * 0 = lecagy ioctl handler to submit a traditional set_frontend() call. - * 1 = lecagy ioctl handler should NOT submit a traditional set_frontend() call. - */ + printk("%s()\n", __FUNCTION__); - int r; + p->frequency = c->frequency; + p->inversion = c->inversion; + switch (fe->ops.info.type) { + case FE_QPSK: + printk("%s() Preparing QPSK req\n", __FUNCTION__); + p->u.qpsk.symbol_rate = c->symbol_rate; + p->u.qpsk.fec_inner = c->fec_inner; + break; + case FE_QAM: + printk("%s() Preparing QAM req\n", __FUNCTION__); + p->u.qam.symbol_rate = c->symbol_rate; + p->u.qam.fec_inner = c->fec_inner; + p->u.qam.modulation = c->modulation; + break; + case FE_OFDM: + printk("%s() Preparing OFDM req\n", __FUNCTION__); + p->u.ofdm.bandwidth = c->bandwidth; + p->u.ofdm.code_rate_HP = c->code_rate_HP; + p->u.ofdm.code_rate_LP = c->code_rate_LP; + p->u.ofdm.constellation = c->modulation; + p->u.ofdm.transmission_mode = c->transmission_mode; + p->u.ofdm.guard_interval = c->guard_interval; + p->u.ofdm.hierarchy_information = c->hierarchy; + break; + case FE_ATSC: + printk("%s() Preparing VSB req\n", __FUNCTION__); + p->u.vsb.modulation = c->modulation; + break; + } +} + +/* Ensure the cached values are set correctly in the frontend + * legacy tuning structures, for the legacy tuning API. + */ +void dtv_property_adv_params_sync(struct dvb_frontend *fe) +{ struct dtv_frontend_properties *c = &fe->dtv_property_cache; struct dvb_frontend_private *fepriv = fe->frontend_priv; - struct dvb_frontend_parameters p; + struct dvb_frontend_parameters *p = &fepriv->parameters; printk("%s()\n", __FUNCTION__); - /* For legacy delivery systems we don't need the delivery_system to be specified */ - if(is_legacy_delivery_system(c->delivery_system)) { - printk("%s() legacy, modulation = %d\n", __FUNCTION__, c->modulation); - switch(c->modulation) { - case QPSK: - printk("%s() Preparing QPSK req\n", __FUNCTION__); - p.frequency = c->frequency; - p.inversion = c->inversion; - p.u.qpsk.symbol_rate = c->symbol_rate; - p.u.qpsk.fec_inner = c->fec_inner; - memcpy(&fepriv->parameters, &p, - sizeof (struct dvb_frontend_parameters)); + p->frequency = c->frequency; + p->inversion = c->inversion; - /* Call the traditional tuning mechanisms. */ + switch(c->modulation) { + case _8PSK: + case _16APSK: + case NBC_QPSK: + p->u.qpsk.symbol_rate = c->symbol_rate; + p->u.qpsk.fec_inner = c->fec_inner; + break; + default: + break; + } - r = 0; - break; - case QAM_16: - case QAM_32: - case QAM_64: - case QAM_128: - case QAM_256: - case QAM_AUTO: - printk("%s() Preparing QAM req\n", __FUNCTION__); - p.frequency = c->frequency; - p.inversion = c->inversion; - p.u.qam.symbol_rate = c->symbol_rate; - p.u.vsb.modulation = c->modulation; - printk("%s() frequency = %d\n", __FUNCTION__, p.frequency); - printk("%s() QAM = %d\n", __FUNCTION__, p.u.vsb.modulation); - memcpy(&fepriv->parameters, &p, - sizeof (struct dvb_frontend_parameters)); + if(c->delivery_system == SYS_ISDBT) { + /* Fake out a generic DVB-T request so we pass validation in the ioctl */ + p->frequency = c->frequency; + p->inversion = INVERSION_AUTO; + p->u.ofdm.constellation = QAM_AUTO; + p->u.ofdm.code_rate_HP = FEC_AUTO; + p->u.ofdm.code_rate_LP = FEC_AUTO; + p->u.ofdm.bandwidth = BANDWIDTH_AUTO; + p->u.ofdm.transmission_mode = TRANSMISSION_MODE_AUTO; + p->u.ofdm.guard_interval = GUARD_INTERVAL_AUTO; + p->u.ofdm.hierarchy_information = HIERARCHY_AUTO; + } +} - /* At this point we're fully formed for backwards - * compatability and we need to return this - * via the ioctl handler as SET_FRONTEND (arg). - * We've already patched the new values into the - * frontends tuning structures so the ioctl code just - * continues as if a legacy tune structure was passed - * from userspace. - */ +void dtv_property_cache_submit(struct dvb_frontend *fe) +{ + struct dtv_frontend_properties *c = &fe->dtv_property_cache; - r = 0; - break; - case VSB_8: - case VSB_16: - printk("%s() Preparing VSB req\n", __FUNCTION__); - p.frequency = c->frequency; - p.u.vsb.modulation = c->modulation; - memcpy(&fepriv->parameters, &p, - sizeof (struct dvb_frontend_parameters)); + printk("%s()\n", __FUNCTION__); - /* Call the traditional tuning mechanisms. */ + /* For legacy delivery systems we don't need the delivery_system to + * be specified, but we populate the older structures from the cache + * so we can call set_frontend on older drivers. + */ + if(is_legacy_delivery_system(c->delivery_system)) { + + printk("%s() legacy, modulation = %d\n", __FUNCTION__, c->modulation); + dtv_property_legacy_params_sync(fe); - r = 0; - break; - /* TODO: Add any missing modulation types */ - default: - r = -1; - } } else { + printk("%s() adv, modulation = %d\n", __FUNCTION__, c->modulation); + /* For advanced delivery systems / modulation types ... * we seed the lecacy dvb_frontend_parameters structure * so that the sanity checking code later in the IOCTL processing * can validate our basic frequency ranges, symbolrates, modulation * etc. */ - r = -1; - - switch(c->modulation) { - case _8PSK: - case _16APSK: - case NBC_QPSK: - /* Just post a notification to the demod driver and let it pull - * the specific values it wants from its dtv_property_cache. - * It can decide how best to use those parameters. - * IOCTL will call set_frontend (by default) due to zigzag - * support etc. - */ - if (fe->ops.set_params) - r = fe->ops.set_params(fe); - - p.frequency = c->frequency; - p.inversion = c->inversion; - p.u.qpsk.symbol_rate = c->symbol_rate; - p.u.qpsk.fec_inner = c->fec_inner; - memcpy(&fepriv->parameters, &p, - sizeof (struct dvb_frontend_parameters)); - - r = 0; - break; - default: - r = -1; - } - - if(c->delivery_system == SYS_ISDBT) { - /* Fake out a generic DVB-T request so we pass validation in the ioctl */ - p.frequency = c->frequency; - p.inversion = INVERSION_AUTO; - p.u.ofdm.constellation = QAM_AUTO; - p.u.ofdm.code_rate_HP = FEC_AUTO; - p.u.ofdm.code_rate_LP = FEC_AUTO; - p.u.ofdm.bandwidth = BANDWIDTH_AUTO; - p.u.ofdm.transmission_mode = TRANSMISSION_MODE_AUTO; - p.u.ofdm.guard_interval = GUARD_INTERVAL_AUTO; - p.u.ofdm.hierarchy_information = HIERARCHY_AUTO; - memcpy(&fepriv->parameters, &p, - sizeof (struct dvb_frontend_parameters)); - - r = 0; - } + dtv_property_adv_params_sync(fe); } - return r; } static int dvb_frontend_ioctl_legacy(struct inode *inode, struct file *file, @@ -1203,13 +1166,13 @@ int dtv_property_process(struct dvb_frontend *fe, struct dtv_property *tvp, break; case DTV_TUNE: /* interpret the cache of data, build either a traditional frontend - * tunerequest and submit it to a subset of the ioctl handler, - * or, call a new undefined method on the frontend to deal with - * all new tune requests. + * tunerequest so we can pass validation in the FE_SET_FRONTEND + * ioctl. */ fe->dtv_property_cache.state = tvp->cmd; printk("%s() Finalised property cache\n", __FUNCTION__); - r |= dtv_property_cache_submit(fe); + dtv_property_cache_submit(fe); + r |= dvb_frontend_ioctl_legacy(inode, file, FE_SET_FRONTEND, &fepriv->parameters); break; -- cgit v0.10.2 From d7c1500183bc138b634377ed90c046e722b887d8 Mon Sep 17 00:00:00 2001 From: Steven Toth Date: Fri, 12 Sep 2008 00:33:04 -0300 Subject: V4L/DVB (9001): S2API: ISDBT_SEGMENT_NUM -> ISDBT_SEGMENT_IDX Signed-off-by: Steven Toth Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/dvb/dvb-core/dvb_frontend.c b/drivers/media/dvb/dvb-core/dvb_frontend.c index 2aaaca6..dc76f99 100644 --- a/drivers/media/dvb/dvb-core/dvb_frontend.c +++ b/drivers/media/dvb/dvb-core/dvb_frontend.c @@ -829,9 +829,9 @@ struct dtv_cmds_h dtv_cmds[] = { .cmd = DTV_SET_DELIVERY_SYSTEM, .set = 1, }, - [DTV_SET_ISDB_SEGMENT_NUM] = { - .name = "DTV_SET_ISDB_SEGMENT_NUM", - .cmd = DTV_SET_ISDB_SEGMENT_NUM, + [DTV_SET_ISDB_SEGMENT_IDX] = { + .name = "DTV_SET_ISDB_SEGMENT_IDX", + .cmd = DTV_SET_ISDB_SEGMENT_IDX, .set = 1, }, [DTV_SET_ISDB_SEGMENT_WIDTH] = { @@ -902,9 +902,9 @@ struct dtv_cmds_h dtv_cmds[] = { .cmd = DTV_GET_DELIVERY_SYSTEM, .set = 0, }, - [DTV_GET_ISDB_SEGMENT_NUM] = { - .name = "DTV_GET_ISDB_SEGMENT_NUM", - .cmd = DTV_GET_ISDB_SEGMENT_NUM, + [DTV_GET_ISDB_SEGMENT_IDX] = { + .name = "DTV_GET_ISDB_SEGMENT_IDX", + .cmd = DTV_GET_ISDB_SEGMENT_IDX, .set = 0, }, [DTV_GET_ISDB_SEGMENT_WIDTH] = { @@ -1232,11 +1232,11 @@ int dtv_property_process(struct dvb_frontend *fe, struct dtv_property *tvp, break; /* ISDB-T Support here */ - case DTV_SET_ISDB_SEGMENT_NUM: - fe->dtv_property_cache.isdb_segment_num = tvp->u.data; + case DTV_SET_ISDB_SEGMENT_IDX: + fe->dtv_property_cache.isdb_segment_idx = tvp->u.data; break; - case DTV_GET_ISDB_SEGMENT_NUM: - tvp->u.data = fe->dtv_property_cache.isdb_segment_num; + case DTV_GET_ISDB_SEGMENT_IDX: + tvp->u.data = fe->dtv_property_cache.isdb_segment_idx; break; case DTV_SET_ISDB_SEGMENT_WIDTH: fe->dtv_property_cache.isdb_segment_width = tvp->u.data; diff --git a/drivers/media/dvb/dvb-core/dvb_frontend.h b/drivers/media/dvb/dvb-core/dvb_frontend.h index 85d3020..1c20909 100644 --- a/drivers/media/dvb/dvb-core/dvb_frontend.h +++ b/drivers/media/dvb/dvb-core/dvb_frontend.h @@ -212,7 +212,7 @@ struct dtv_frontend_properties { fe_delivery_system_t delivery_system; /* ISDB-T specifics */ - u32 isdb_segment_num; + u32 isdb_segment_idx; u32 isdb_segment_width; fe_code_rate_t isdb_layera_fec; fe_modulation_t isdb_layera_modulation; diff --git a/include/linux/dvb/frontend.h b/include/linux/dvb/frontend.h index 915edd3..e4f2117 100644 --- a/include/linux/dvb/frontend.h +++ b/include/linux/dvb/frontend.h @@ -288,8 +288,8 @@ typedef enum dtv_cmd_types { DTV_GET_DELIVERY_SYSTEM, /* ISDB-T */ - DTV_SET_ISDB_SEGMENT_NUM, - DTV_GET_ISDB_SEGMENT_NUM, + DTV_SET_ISDB_SEGMENT_IDX, + DTV_GET_ISDB_SEGMENT_IDX, DTV_SET_ISDB_SEGMENT_WIDTH, DTV_GET_ISDB_SEGMENT_WIDTH, DTV_GET_ISDB_LAYERA_FEC, -- cgit v0.10.2 From 80a773c9bcc6f67944e186de3d2ab8b582889bc8 Mon Sep 17 00:00:00 2001 From: Steven Toth Date: Fri, 12 Sep 2008 00:53:50 -0300 Subject: V4L/DVB (9002): S2API: Ensure cache->delivery_system is set at all times. This helps complex demods which support different modulation types be better informed. Signed-off-by: Steven Toth Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/dvb/dvb-core/dvb_frontend.c b/drivers/media/dvb/dvb-core/dvb_frontend.c index dc76f99..205f602 100644 --- a/drivers/media/dvb/dvb-core/dvb_frontend.c +++ b/drivers/media/dvb/dvb-core/dvb_frontend.c @@ -1010,11 +1010,13 @@ void dtv_property_cache_sync(struct dvb_frontend *fe, struct dvb_frontend_parame case FE_QPSK: c->symbol_rate = p->u.qpsk.symbol_rate; c->fec_inner = p->u.qpsk.fec_inner; + c->delivery_system = SYS_DVBS; break; case FE_QAM: c->symbol_rate = p->u.qam.symbol_rate; c->fec_inner = p->u.qam.fec_inner; c->modulation = p->u.qam.modulation; + c->delivery_system = SYS_DVBC_ANNEX_AC; break; case FE_OFDM: c->bandwidth = p->u.ofdm.bandwidth; @@ -1024,9 +1026,14 @@ void dtv_property_cache_sync(struct dvb_frontend *fe, struct dvb_frontend_parame c->transmission_mode = p->u.ofdm.transmission_mode; c->guard_interval = p->u.ofdm.guard_interval; c->hierarchy = p->u.ofdm.hierarchy_information; + c->delivery_system = SYS_DVBT; break; case FE_ATSC: c->modulation = p->u.vsb.modulation; + if ((c->modulation == VSB_8) || (c->modulation == VSB_16)) + c->delivery_system = SYS_ATSC; + else + c->delivery_system = SYS_DVBC_ANNEX_B; break; } } @@ -1050,12 +1057,14 @@ void dtv_property_legacy_params_sync(struct dvb_frontend *fe) printk("%s() Preparing QPSK req\n", __FUNCTION__); p->u.qpsk.symbol_rate = c->symbol_rate; p->u.qpsk.fec_inner = c->fec_inner; + c->delivery_system = SYS_DVBS; break; case FE_QAM: printk("%s() Preparing QAM req\n", __FUNCTION__); p->u.qam.symbol_rate = c->symbol_rate; p->u.qam.fec_inner = c->fec_inner; p->u.qam.modulation = c->modulation; + c->delivery_system = SYS_DVBC_ANNEX_AC; break; case FE_OFDM: printk("%s() Preparing OFDM req\n", __FUNCTION__); @@ -1066,10 +1075,15 @@ void dtv_property_legacy_params_sync(struct dvb_frontend *fe) p->u.ofdm.transmission_mode = c->transmission_mode; p->u.ofdm.guard_interval = c->guard_interval; p->u.ofdm.hierarchy_information = c->hierarchy; + c->delivery_system = SYS_DVBT; break; case FE_ATSC: printk("%s() Preparing VSB req\n", __FUNCTION__); p->u.vsb.modulation = c->modulation; + if ((c->modulation == VSB_8) || (c->modulation == VSB_16)) + c->delivery_system = SYS_ATSC; + else + c->delivery_system = SYS_DVBC_ANNEX_B; break; } } -- cgit v0.10.2 From 363429a089590f3f4071ebc492b3712fdcba770b Mon Sep 17 00:00:00 2001 From: Steven Toth Date: Fri, 12 Sep 2008 01:34:28 -0300 Subject: V4L/DVB (9003): S2API: Remove the DTV_SET_ and DTV_GET_ prefixes The API now assumes that ioctl calls for FE_SET_PROPERTY and all set commands, and FE_GET_PROPERTY are get commands. Simplification. Signed-off-by: Steven Toth Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/dvb/dvb-core/dvb_frontend.c b/drivers/media/dvb/dvb-core/dvb_frontend.c index 205f602..2ed7484 100644 --- a/drivers/media/dvb/dvb-core/dvb_frontend.c +++ b/drivers/media/dvb/dvb-core/dvb_frontend.c @@ -768,193 +768,128 @@ struct dtv_cmds_h dtv_cmds[] = { }, /* Set */ - [DTV_SET_FREQUENCY] = { - .name = "DTV_SET_FREQUENCY", - .cmd = DTV_SET_FREQUENCY, + [DTV_FREQUENCY] = { + .name = "DTV_FREQUENCY", + .cmd = DTV_FREQUENCY, .set = 1, }, - [DTV_SET_BANDWIDTH] = { - .name = "DTV_SET_BANDWIDTH", - .cmd = DTV_SET_BANDWIDTH, + [DTV_BANDWIDTH] = { + .name = "DTV_BANDWIDTH", + .cmd = DTV_BANDWIDTH, .set = 1, }, - [DTV_SET_MODULATION] = { - .name = "DTV_SET_MODULATION", - .cmd = DTV_SET_MODULATION, + [DTV_MODULATION] = { + .name = "DTV_MODULATION", + .cmd = DTV_MODULATION, .set = 1, }, - [DTV_SET_INVERSION] = { - .name = "DTV_SET_INVERSION", - .cmd = DTV_SET_INVERSION, + [DTV_INVERSION] = { + .name = "DTV_INVERSION", + .cmd = DTV_INVERSION, .set = 1, }, - [DTV_SET_DISEQC_MASTER] = { - .name = "DTV_SET_DISEQC_MASTER", - .cmd = DTV_SET_DISEQC_MASTER, + [DTV_DISEQC_MASTER] = { + .name = "DTV_DISEQC_MASTER", + .cmd = DTV_DISEQC_MASTER, .set = 1, .buffer = 1, }, - [DTV_SET_SYMBOL_RATE] = { - .name = "DTV_SET_SYMBOL_RATE", - .cmd = DTV_SET_SYMBOL_RATE, + [DTV_SYMBOL_RATE] = { + .name = "DTV_SYMBOL_RATE", + .cmd = DTV_SYMBOL_RATE, .set = 1, }, - [DTV_SET_INNER_FEC] = { - .name = "DTV_SET_INNER_FEC", - .cmd = DTV_SET_INNER_FEC, + [DTV_INNER_FEC] = { + .name = "DTV_INNER_FEC", + .cmd = DTV_INNER_FEC, .set = 1, }, - [DTV_SET_VOLTAGE] = { - .name = "DTV_SET_VOLTAGE", - .cmd = DTV_SET_VOLTAGE, + [DTV_VOLTAGE] = { + .name = "DTV_VOLTAGE", + .cmd = DTV_VOLTAGE, .set = 1, }, - [DTV_SET_TONE] = { - .name = "DTV_SET_TONE", - .cmd = DTV_SET_TONE, + [DTV_TONE] = { + .name = "DTV_TONE", + .cmd = DTV_TONE, .set = 1, }, - [DTV_SET_PILOT] = { - .name = "DTV_SET_PILOT", - .cmd = DTV_SET_PILOT, + [DTV_PILOT] = { + .name = "DTV_PILOT", + .cmd = DTV_PILOT, .set = 1, }, - [DTV_SET_ROLLOFF] = { - .name = "DTV_SET_ROLLOFF", - .cmd = DTV_SET_ROLLOFF, + [DTV_ROLLOFF] = { + .name = "DTV_ROLLOFF", + .cmd = DTV_ROLLOFF, .set = 1, }, - [DTV_SET_DELIVERY_SYSTEM] = { - .name = "DTV_SET_DELIVERY_SYSTEM", - .cmd = DTV_SET_DELIVERY_SYSTEM, + [DTV_DELIVERY_SYSTEM] = { + .name = "DTV_DELIVERY_SYSTEM", + .cmd = DTV_DELIVERY_SYSTEM, .set = 1, }, - [DTV_SET_ISDB_SEGMENT_IDX] = { - .name = "DTV_SET_ISDB_SEGMENT_IDX", - .cmd = DTV_SET_ISDB_SEGMENT_IDX, + [DTV_ISDB_SEGMENT_IDX] = { + .name = "DTV_ISDB_SEGMENT_IDX", + .cmd = DTV_ISDB_SEGMENT_IDX, .set = 1, }, - [DTV_SET_ISDB_SEGMENT_WIDTH] = { - .name = "DTV_SET_ISDB_SEGMENT_WIDTH", - .cmd = DTV_SET_ISDB_SEGMENT_WIDTH, + [DTV_ISDB_SEGMENT_WIDTH] = { + .name = "DTV_ISDB_SEGMENT_WIDTH", + .cmd = DTV_ISDB_SEGMENT_WIDTH, .set = 1, }, /* Get */ - [DTV_GET_FREQUENCY] = { - .name = "DTV_GET_FREQUENCY", - .cmd = DTV_GET_FREQUENCY, - .set = 0, - }, - [DTV_GET_BANDWIDTH] = { - .name = "DTV_GET_BANDWIDTH", - .cmd = DTV_GET_BANDWIDTH, - .set = 0, - }, - [DTV_GET_MODULATION] = { - .name = "DTV_GET_MODULATION", - .cmd = DTV_GET_MODULATION, - .set = 0, - }, - [DTV_GET_INVERSION] = { - .name = "DTV_GET_INVERSION", - .cmd = DTV_GET_INVERSION, - .set = 0, - }, - [DTV_GET_DISEQC_SLAVE_REPLY] = { - .name = "DTV_GET_DISEQC_SLAVE_REPLY", - .cmd = DTV_GET_DISEQC_SLAVE_REPLY, + [DTV_DISEQC_SLAVE_REPLY] = { + .name = "DTV_DISEQC_SLAVE_REPLY", + .cmd = DTV_DISEQC_SLAVE_REPLY, .set = 0, .buffer = 1, }, - [DTV_GET_SYMBOL_RATE] = { - .name = "DTV_GET_SYMBOL_RATE", - .cmd = DTV_GET_SYMBOL_RATE, - .set = 0, - }, - [DTV_GET_INNER_FEC] = { - .name = "DTV_GET_INNER_FEC", - .cmd = DTV_GET_INNER_FEC, - .set = 0, - }, - [DTV_GET_VOLTAGE] = { - .name = "DTV_GET_VOLTAGE", - .cmd = DTV_GET_VOLTAGE, - .set = 0, - }, - [DTV_GET_TONE] = { - .name = "DTV_GET_TONE", - .cmd = DTV_GET_TONE, - .set = 0, - }, - [DTV_GET_PILOT] = { - .name = "DTV_GET_PILOT", - .cmd = DTV_GET_PILOT, - .set = 0, - }, - [DTV_GET_ROLLOFF] = { - .name = "DTV_GET_ROLLOFF", - .cmd = DTV_GET_ROLLOFF, - .set = 0, - }, - [DTV_GET_DELIVERY_SYSTEM] = { - .name = "DTV_GET_DELIVERY_SYSTEM", - .cmd = DTV_GET_DELIVERY_SYSTEM, - .set = 0, - }, - [DTV_GET_ISDB_SEGMENT_IDX] = { - .name = "DTV_GET_ISDB_SEGMENT_IDX", - .cmd = DTV_GET_ISDB_SEGMENT_IDX, - .set = 0, - }, - [DTV_GET_ISDB_SEGMENT_WIDTH] = { - .name = "DTV_GET_ISDB_SEGMENT_WIDTH", - .cmd = DTV_GET_ISDB_SEGMENT_WIDTH, + [DTV_ISDB_LAYERA_FEC] = { + .name = "DTV_ISDB_LAYERA_FEC", + .cmd = DTV_ISDB_LAYERA_FEC, .set = 0, }, - [DTV_GET_ISDB_LAYERA_FEC] = { - .name = "DTV_GET_ISDB_LAYERA_FEC", - .cmd = DTV_GET_ISDB_LAYERA_FEC, + [DTV_ISDB_LAYERA_MODULATION] = { + .name = "DTV_ISDB_LAYERA_MODULATION", + .cmd = DTV_ISDB_LAYERA_MODULATION, .set = 0, }, - [DTV_GET_ISDB_LAYERA_MODULATION] = { - .name = "DTV_GET_ISDB_LAYERA_MODULATION", - .cmd = DTV_GET_ISDB_LAYERA_MODULATION, + [DTV_ISDB_LAYERA_SEGMENT_WIDTH] = { + .name = "DTV_ISDB_LAYERA_SEGMENT_WIDTH", + .cmd = DTV_ISDB_LAYERA_SEGMENT_WIDTH, .set = 0, }, - [DTV_GET_ISDB_LAYERA_SEGMENT_WIDTH] = { - .name = "DTV_GET_ISDB_LAYERA_SEGMENT_WIDTH", - .cmd = DTV_GET_ISDB_LAYERA_SEGMENT_WIDTH, + [DTV_ISDB_LAYERB_FEC] = { + .name = "DTV_ISDB_LAYERB_FEC", + .cmd = DTV_ISDB_LAYERB_FEC, .set = 0, }, - [DTV_GET_ISDB_LAYERB_FEC] = { - .name = "DTV_GET_ISDB_LAYERB_FEC", - .cmd = DTV_GET_ISDB_LAYERB_FEC, + [DTV_ISDB_LAYERB_MODULATION] = { + .name = "DTV_ISDB_LAYERB_MODULATION", + .cmd = DTV_ISDB_LAYERB_MODULATION, .set = 0, }, - [DTV_GET_ISDB_LAYERB_MODULATION] = { - .name = "DTV_GET_ISDB_LAYERB_MODULATION", - .cmd = DTV_GET_ISDB_LAYERB_MODULATION, + [DTV_ISDB_LAYERB_SEGMENT_WIDTH] = { + .name = "DTV_ISDB_LAYERB_SEGMENT_WIDTH", + .cmd = DTV_ISDB_LAYERB_SEGMENT_WIDTH, .set = 0, }, - [DTV_GET_ISDB_LAYERB_SEGMENT_WIDTH] = { - .name = "DTV_GET_ISDB_LAYERB_SEGMENT_WIDTH", - .cmd = DTV_GET_ISDB_LAYERB_SEGMENT_WIDTH, + [DTV_ISDB_LAYERC_FEC] = { + .name = "DTV_ISDB_LAYERC_FEC", + .cmd = DTV_ISDB_LAYERC_FEC, .set = 0, }, - [DTV_GET_ISDB_LAYERC_FEC] = { - .name = "DTV_GET_ISDB_LAYERC_FEC", - .cmd = DTV_GET_ISDB_LAYERC_FEC, + [DTV_ISDB_LAYERC_MODULATION] = { + .name = "DTV_ISDB_LAYERC_MODULATION", + .cmd = DTV_ISDB_LAYERC_MODULATION, .set = 0, }, - [DTV_GET_ISDB_LAYERC_MODULATION] = { - .name = "DTV_GET_ISDB_LAYERC_MODULATION", - .cmd = DTV_GET_ISDB_LAYERC_MODULATION, - .set = 0, - }, - [DTV_GET_ISDB_LAYERC_SEGMENT_WIDTH] = { - .name = "DTV_GET_ISDB_LAYERC_SEGMENT_WIDTH", - .cmd = DTV_GET_ISDB_LAYERC_SEGMENT_WIDTH, + [DTV_ISDB_LAYERC_SEGMENT_WIDTH] = { + .name = "DTV_ISDB_LAYERC_SEGMENT_WIDTH", + .cmd = DTV_ISDB_LAYERC_SEGMENT_WIDTH, .set = 0, }, }; @@ -1160,7 +1095,92 @@ static int dvb_frontend_ioctl_legacy(struct inode *inode, struct file *file, static int dvb_frontend_ioctl_properties(struct inode *inode, struct file *file, unsigned int cmd, void *parg); -int dtv_property_process(struct dvb_frontend *fe, struct dtv_property *tvp, +int dtv_property_process_get(struct dvb_frontend *fe, struct dtv_property *tvp, + struct inode *inode, struct file *file) +{ + int r = 0; + + printk("%s()\n", __FUNCTION__); + + dtv_property_dump(tvp); + + switch(tvp->cmd) { + case DTV_FREQUENCY: + tvp->u.data = fe->dtv_property_cache.frequency; + break; + case DTV_MODULATION: + tvp->u.data = fe->dtv_property_cache.modulation; + break; + case DTV_BANDWIDTH: + tvp->u.data = fe->dtv_property_cache.bandwidth; + break; + case DTV_INVERSION: + tvp->u.data = fe->dtv_property_cache.inversion; + break; + case DTV_SYMBOL_RATE: + tvp->u.data = fe->dtv_property_cache.symbol_rate; + break; + case DTV_INNER_FEC: + tvp->u.data = fe->dtv_property_cache.fec_inner; + break; + case DTV_PILOT: + tvp->u.data = fe->dtv_property_cache.pilot; + break; + case DTV_ROLLOFF: + tvp->u.data = fe->dtv_property_cache.rolloff; + break; + case DTV_DELIVERY_SYSTEM: + tvp->u.data = fe->dtv_property_cache.delivery_system; + break; + + /* ISDB-T Support here */ + case DTV_ISDB_SEGMENT_IDX: + tvp->u.data = fe->dtv_property_cache.isdb_segment_idx; + break; + case DTV_ISDB_SEGMENT_WIDTH: + tvp->u.data = fe->dtv_property_cache.isdb_segment_width; + break; + case DTV_ISDB_LAYERA_FEC: + tvp->u.data = fe->dtv_property_cache.isdb_layera_fec; + break; + case DTV_ISDB_LAYERA_MODULATION: + tvp->u.data = fe->dtv_property_cache.isdb_layera_modulation; + break; + case DTV_ISDB_LAYERA_SEGMENT_WIDTH: + tvp->u.data = fe->dtv_property_cache.isdb_layera_segment_width; + break; + case DTV_ISDB_LAYERB_FEC: + tvp->u.data = fe->dtv_property_cache.isdb_layerb_fec; + break; + case DTV_ISDB_LAYERB_MODULATION: + tvp->u.data = fe->dtv_property_cache.isdb_layerb_modulation; + break; + case DTV_ISDB_LAYERB_SEGMENT_WIDTH: + tvp->u.data = fe->dtv_property_cache.isdb_layerb_segment_width; + break; + case DTV_ISDB_LAYERC_FEC: + tvp->u.data = fe->dtv_property_cache.isdb_layerc_fec; + break; + case DTV_ISDB_LAYERC_MODULATION: + tvp->u.data = fe->dtv_property_cache.isdb_layerc_modulation; + break; + case DTV_ISDB_LAYERC_SEGMENT_WIDTH: + tvp->u.data = fe->dtv_property_cache.isdb_layerc_segment_width; + break; + case DTV_VOLTAGE: + tvp->u.data = fe->dtv_property_cache.voltage; + break; + case DTV_TONE: + tvp->u.data = fe->dtv_property_cache.sectone; + break; + default: + r = -1; + } + + return r; +} + +int dtv_property_process_set(struct dvb_frontend *fe, struct dtv_property *tvp, struct inode *inode, struct file *file) { int r = 0; @@ -1190,117 +1210,53 @@ int dtv_property_process(struct dvb_frontend *fe, struct dtv_property *tvp, r |= dvb_frontend_ioctl_legacy(inode, file, FE_SET_FRONTEND, &fepriv->parameters); break; - case DTV_SET_FREQUENCY: + case DTV_FREQUENCY: fe->dtv_property_cache.frequency = tvp->u.data; break; - case DTV_GET_FREQUENCY: - tvp->u.data = fe->dtv_property_cache.frequency; - break; - case DTV_SET_MODULATION: + case DTV_MODULATION: fe->dtv_property_cache.modulation = tvp->u.data; break; - case DTV_GET_MODULATION: - tvp->u.data = fe->dtv_property_cache.modulation; - break; - case DTV_SET_BANDWIDTH: + case DTV_BANDWIDTH: fe->dtv_property_cache.bandwidth = tvp->u.data; break; - case DTV_GET_BANDWIDTH: - tvp->u.data = fe->dtv_property_cache.bandwidth; - break; - case DTV_SET_INVERSION: + case DTV_INVERSION: fe->dtv_property_cache.inversion = tvp->u.data; break; - case DTV_GET_INVERSION: - tvp->u.data = fe->dtv_property_cache.inversion; - break; - case DTV_SET_SYMBOL_RATE: + case DTV_SYMBOL_RATE: fe->dtv_property_cache.symbol_rate = tvp->u.data; break; - case DTV_GET_SYMBOL_RATE: - tvp->u.data = fe->dtv_property_cache.symbol_rate; - break; - case DTV_SET_INNER_FEC: + case DTV_INNER_FEC: fe->dtv_property_cache.fec_inner = tvp->u.data; break; - case DTV_GET_INNER_FEC: - tvp->u.data = fe->dtv_property_cache.fec_inner; - break; - case DTV_SET_PILOT: + case DTV_PILOT: fe->dtv_property_cache.pilot = tvp->u.data; break; - case DTV_GET_PILOT: - tvp->u.data = fe->dtv_property_cache.pilot; - break; - case DTV_SET_ROLLOFF: + case DTV_ROLLOFF: fe->dtv_property_cache.rolloff = tvp->u.data; break; - case DTV_GET_ROLLOFF: - tvp->u.data = fe->dtv_property_cache.rolloff; - break; - case DTV_SET_DELIVERY_SYSTEM: + case DTV_DELIVERY_SYSTEM: fe->dtv_property_cache.delivery_system = tvp->u.data; break; - case DTV_GET_DELIVERY_SYSTEM: - tvp->u.data = fe->dtv_property_cache.delivery_system; - break; /* ISDB-T Support here */ - case DTV_SET_ISDB_SEGMENT_IDX: + case DTV_ISDB_SEGMENT_IDX: fe->dtv_property_cache.isdb_segment_idx = tvp->u.data; break; - case DTV_GET_ISDB_SEGMENT_IDX: - tvp->u.data = fe->dtv_property_cache.isdb_segment_idx; - break; - case DTV_SET_ISDB_SEGMENT_WIDTH: + case DTV_ISDB_SEGMENT_WIDTH: fe->dtv_property_cache.isdb_segment_width = tvp->u.data; break; - case DTV_GET_ISDB_SEGMENT_WIDTH: - tvp->u.data = fe->dtv_property_cache.isdb_segment_width; - break; - case DTV_GET_ISDB_LAYERA_FEC: - tvp->u.data = fe->dtv_property_cache.isdb_layera_fec; - break; - case DTV_GET_ISDB_LAYERA_MODULATION: - tvp->u.data = fe->dtv_property_cache.isdb_layera_modulation; - break; - case DTV_GET_ISDB_LAYERA_SEGMENT_WIDTH: - tvp->u.data = fe->dtv_property_cache.isdb_layera_segment_width; - break; - case DTV_GET_ISDB_LAYERB_FEC: - tvp->u.data = fe->dtv_property_cache.isdb_layerb_fec; - break; - case DTV_GET_ISDB_LAYERB_MODULATION: - tvp->u.data = fe->dtv_property_cache.isdb_layerb_modulation; - break; - case DTV_GET_ISDB_LAYERB_SEGMENT_WIDTH: - tvp->u.data = fe->dtv_property_cache.isdb_layerb_segment_width; - break; - case DTV_GET_ISDB_LAYERC_FEC: - tvp->u.data = fe->dtv_property_cache.isdb_layerc_fec; - break; - case DTV_GET_ISDB_LAYERC_MODULATION: - tvp->u.data = fe->dtv_property_cache.isdb_layerc_modulation; - break; - case DTV_GET_ISDB_LAYERC_SEGMENT_WIDTH: - tvp->u.data = fe->dtv_property_cache.isdb_layerc_segment_width; - break; - case DTV_SET_VOLTAGE: + case DTV_VOLTAGE: fe->dtv_property_cache.voltage = tvp->u.data; r = dvb_frontend_ioctl_legacy(inode, file, FE_SET_VOLTAGE, (void *)fe->dtv_property_cache.voltage); break; - case DTV_GET_VOLTAGE: - tvp->u.data = fe->dtv_property_cache.voltage; - break; - case DTV_SET_TONE: + case DTV_TONE: fe->dtv_property_cache.sectone = tvp->u.data; r = dvb_frontend_ioctl_legacy(inode, file, FE_SET_TONE, (void *)fe->dtv_property_cache.sectone); break; - case DTV_GET_TONE: - tvp->u.data = fe->dtv_property_cache.sectone; - break; + default: + r = -1; } return r; @@ -1375,13 +1331,50 @@ static int dvb_frontend_ioctl_properties(struct inode *inode, struct file *file, } for (i = 0; i < tvps->num; i++) - dtv_property_process(fe, tvp + i, inode, file); + dtv_property_process_set(fe, tvp + i, inode, file); if(fe->dtv_property_cache.state == DTV_TUNE) { printk("%s() Property cache is full, tuning\n", __FUNCTION__); } err = 0; - } + } else + if(cmd == FE_GET_PROPERTY) { + printk("%s() FE_GET_PROPERTY\n", __FUNCTION__); + + tvps = (struct dtv_properties __user *)parg; + + printk("%s() properties.num = %d\n", __FUNCTION__, tvps->num); + printk("%s() properties.props = %p\n", __FUNCTION__, tvps->props); + + /* Put an arbitrary limit on the number of messages that can + * be sent at once */ + if (tvps->num > DTV_IOCTL_MAX_MSGS) + return -EINVAL; + + tvp = (struct dtv_property *) kmalloc(tvps->num * + sizeof(struct dtv_property), GFP_KERNEL); + if (!tvp) { + err = -ENOMEM; + goto out; + } + + if (copy_from_user(tvp, tvps->props, tvps->num * sizeof(struct dtv_property))) { + err = -EFAULT; + goto out; + } + + for (i = 0; i < tvps->num; i++) + dtv_property_process_get(fe, tvp + i, inode, file); + + if (copy_to_user(tvps->props, tvp, tvps->num * sizeof(struct dtv_property))) { + err = -EFAULT; + goto out; + } + + err = 0; + } else + err = -EOPNOTSUPP; + out: kfree(tvp); return err; diff --git a/include/linux/dvb/frontend.h b/include/linux/dvb/frontend.h index e4f2117..05bdec9 100644 --- a/include/linux/dvb/frontend.h +++ b/include/linux/dvb/frontend.h @@ -255,52 +255,39 @@ typedef enum dtv_cmd_types { DTV_TUNE, DTV_CLEAR, - DTV_SET_FREQUENCY, - DTV_SET_MODULATION, - DTV_SET_BANDWIDTH, - DTV_SET_INVERSION, - DTV_SET_DISEQC_MASTER, - DTV_SET_SYMBOL_RATE, - DTV_SET_INNER_FEC, - DTV_SET_VOLTAGE, - DTV_SET_TONE, - DTV_SET_PILOT, - DTV_SET_ROLLOFF, - - DTV_GET_FREQUENCY, - DTV_GET_MODULATION, - DTV_GET_BANDWIDTH, - DTV_GET_INVERSION, - DTV_GET_DISEQC_SLAVE_REPLY, - DTV_GET_SYMBOL_RATE, - DTV_GET_INNER_FEC, - DTV_GET_VOLTAGE, - DTV_GET_TONE, - DTV_GET_PILOT, - DTV_GET_ROLLOFF, + DTV_FREQUENCY, + DTV_MODULATION, + DTV_BANDWIDTH, + DTV_INVERSION, + DTV_DISEQC_MASTER, + DTV_SYMBOL_RATE, + DTV_INNER_FEC, + DTV_VOLTAGE, + DTV_TONE, + DTV_PILOT, + DTV_ROLLOFF, + + DTV_DISEQC_SLAVE_REPLY, /* Basic enumeration set for querying unlimited capabilities */ - DTV_GET_FE_CAPABILITY_COUNT, - DTV_GET_FE_CAPABILITY, + DTV_FE_CAPABILITY_COUNT, + DTV_FE_CAPABILITY, /* New commands are always appended */ - DTV_SET_DELIVERY_SYSTEM, - DTV_GET_DELIVERY_SYSTEM, + DTV_DELIVERY_SYSTEM, /* ISDB-T */ - DTV_SET_ISDB_SEGMENT_IDX, - DTV_GET_ISDB_SEGMENT_IDX, - DTV_SET_ISDB_SEGMENT_WIDTH, - DTV_GET_ISDB_SEGMENT_WIDTH, - DTV_GET_ISDB_LAYERA_FEC, - DTV_GET_ISDB_LAYERA_MODULATION, - DTV_GET_ISDB_LAYERA_SEGMENT_WIDTH, - DTV_GET_ISDB_LAYERB_FEC, - DTV_GET_ISDB_LAYERB_MODULATION, - DTV_GET_ISDB_LAYERB_SEGMENT_WIDTH, - DTV_GET_ISDB_LAYERC_FEC, - DTV_GET_ISDB_LAYERC_MODULATION, - DTV_GET_ISDB_LAYERC_SEGMENT_WIDTH, + DTV_ISDB_SEGMENT_IDX, + DTV_ISDB_SEGMENT_WIDTH, + DTV_ISDB_LAYERA_FEC, + DTV_ISDB_LAYERA_MODULATION, + DTV_ISDB_LAYERA_SEGMENT_WIDTH, + DTV_ISDB_LAYERB_FEC, + DTV_ISDB_LAYERB_MODULATION, + DTV_ISDB_LAYERB_SEGMENT_WIDTH, + DTV_ISDB_LAYERC_FEC, + DTV_ISDB_LAYERC_MODULATION, + DTV_ISDB_LAYERC_SEGMENT_WIDTH, } dtv_cmd_types_t; -- cgit v0.10.2 From bfbf2dae30ed75bceccc6a88d2d9368694d6bf40 Mon Sep 17 00:00:00 2001 From: Steven Toth Date: Fri, 12 Sep 2008 01:37:37 -0300 Subject: V4L/DVB (9004): S2API: Implement GET/SET handing to the demods The frontends will be notified (if they chose) of all _get and _set commands so they can help determine result or action. Results are now returned to userspace correctly. Signed-off-by: Steven Toth Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/dvb/dvb-core/dvb_frontend.c b/drivers/media/dvb/dvb-core/dvb_frontend.c index 2ed7484..8bc3c08 100644 --- a/drivers/media/dvb/dvb-core/dvb_frontend.c +++ b/drivers/media/dvb/dvb-core/dvb_frontend.c @@ -1104,6 +1104,13 @@ int dtv_property_process_get(struct dvb_frontend *fe, struct dtv_property *tvp, dtv_property_dump(tvp); + /* Allow the frontend to validate incoming properties */ + if (fe->ops.get_property) + r = fe->ops.get_property(fe, tvp); + + if (r < 0) + return r; + switch(tvp->cmd) { case DTV_FREQUENCY: tvp->u.data = fe->dtv_property_cache.frequency; @@ -1188,6 +1195,13 @@ int dtv_property_process_set(struct dvb_frontend *fe, struct dtv_property *tvp, printk("%s()\n", __FUNCTION__); dtv_property_dump(tvp); + /* Allow the frontend to validate incoming properties */ + if (fe->ops.set_property) + r = fe->ops.set_property(fe, tvp); + + if (r < 0) + return r; + switch(tvp->cmd) { case DTV_CLEAR: /* Reset a cache of data specific to the frontend here. This does @@ -1331,12 +1345,12 @@ static int dvb_frontend_ioctl_properties(struct inode *inode, struct file *file, } for (i = 0; i < tvps->num; i++) - dtv_property_process_set(fe, tvp + i, inode, file); + err |= dtv_property_process_set(fe, tvp + i, inode, file); if(fe->dtv_property_cache.state == DTV_TUNE) { printk("%s() Property cache is full, tuning\n", __FUNCTION__); } - err = 0; + } else if(cmd == FE_GET_PROPERTY) { printk("%s() FE_GET_PROPERTY\n", __FUNCTION__); @@ -1364,14 +1378,13 @@ static int dvb_frontend_ioctl_properties(struct inode *inode, struct file *file, } for (i = 0; i < tvps->num; i++) - dtv_property_process_get(fe, tvp + i, inode, file); + err |= dtv_property_process_get(fe, tvp + i, inode, file); if (copy_to_user(tvps->props, tvp, tvps->num * sizeof(struct dtv_property))) { err = -EFAULT; goto out; } - err = 0; } else err = -EOPNOTSUPP; diff --git a/drivers/media/dvb/dvb-core/dvb_frontend.h b/drivers/media/dvb/dvb-core/dvb_frontend.h index 1c20909..784e8fe1 100644 --- a/drivers/media/dvb/dvb-core/dvb_frontend.h +++ b/drivers/media/dvb/dvb-core/dvb_frontend.h @@ -172,7 +172,6 @@ struct dvb_frontend_ops { int (*set_property)(struct dvb_frontend* fe, struct dtv_property* tvp); int (*get_property)(struct dvb_frontend* fe, struct dtv_property* tvp); - int (*set_params)(struct dvb_frontend* fe); }; #define MAX_EVENT 8 diff --git a/drivers/media/dvb/frontends/cx24116.c b/drivers/media/dvb/frontends/cx24116.c index 9f93930..0ac2c54 100644 --- a/drivers/media/dvb/frontends/cx24116.c +++ b/drivers/media/dvb/frontends/cx24116.c @@ -802,9 +802,9 @@ static int cx24116_set_property(struct dvb_frontend *fe, struct dtv_property* tv return 0; } -static int cx24116_set_params(struct dvb_frontend *fe) +static int cx24116_get_property(struct dvb_frontend *fe, struct dtv_property* tvp) { - dprintk("%s(..) We were notified that a tune request may occur\n", __func__); + dprintk("%s(..)\n", __func__); return 0; } @@ -964,7 +964,7 @@ static struct dvb_frontend_ops cx24116_ops = { .diseqc_send_burst = cx24116_diseqc_send_burst, .set_property = cx24116_set_property, - .set_params = cx24116_set_params, + .get_property = cx24116_get_property, .set_frontend = cx24116_set_frontend, }; -- cgit v0.10.2 From e6f9ec86575358309cf9d4b2643df2f3b1f6f9fa Mon Sep 17 00:00:00 2001 From: "Igor M. Liplianin" Date: Fri, 12 Sep 2008 14:49:06 -0300 Subject: V4L/DVB (9005): Bug fix: ioctl FE_SET_PROPERTY/FE_GET_PROPERTY always return error Bug fix: ioctl FE_SET_PROPERTY/FE_GET_PROPERTY always return error Signed-off-by: Igor M. Liplianin Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/dvb/dvb-core/dvb_frontend.c b/drivers/media/dvb/dvb-core/dvb_frontend.c index 8bc3c08..161ebcf 100644 --- a/drivers/media/dvb/dvb-core/dvb_frontend.c +++ b/drivers/media/dvb/dvb-core/dvb_frontend.c @@ -1311,7 +1311,7 @@ static int dvb_frontend_ioctl_properties(struct inode *inode, struct file *file, { struct dvb_device *dvbdev = file->private_data; struct dvb_frontend *fe = dvbdev->priv; - int err = -EOPNOTSUPP; + int err = 0; struct dtv_properties *tvps = NULL; struct dtv_property *tvp = NULL; -- cgit v0.10.2 From 4dd88bec368a6e4caa86a511f7adbc4c08992c5c Mon Sep 17 00:00:00 2001 From: Steven Toth Date: Sat, 13 Sep 2008 15:09:07 -0300 Subject: V4L/DVB (9006): S2API: Allow reliable use of old and new api on the same frontend, regardless. Signed-off-by: Steven Toth Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/dvb/dvb-core/dvb_frontend.c b/drivers/media/dvb/dvb-core/dvb_frontend.c index 161ebcf..6b914f9 100644 --- a/drivers/media/dvb/dvb-core/dvb_frontend.c +++ b/drivers/media/dvb/dvb-core/dvb_frontend.c @@ -1299,8 +1299,10 @@ static int dvb_frontend_ioctl(struct inode *inode, struct file *file, if ((cmd == FE_SET_PROPERTY) || (cmd == FE_GET_PROPERTY)) err = dvb_frontend_ioctl_properties(inode, file, cmd, parg); - else + else { + fe->dtv_property_cache.state = DTV_UNDEFINED; err = dvb_frontend_ioctl_legacy(inode, file, cmd, parg); + } up(&fepriv->sem); return err; @@ -1567,8 +1569,6 @@ static int dvb_frontend_ioctl_legacy(struct inode *inode, struct file *file, case FE_SET_FRONTEND: { struct dvb_frontend_tune_settings fetunesettings; - dtv_property_cache_sync(fe, &fepriv->parameters); - if(fe->dtv_property_cache.state == DTV_TUNE) { if (dvb_frontend_check_parameters(fe, &fepriv->parameters) < 0) { err = -EINVAL; @@ -1580,6 +1580,7 @@ static int dvb_frontend_ioctl_legacy(struct inode *inode, struct file *file, break; } + dtv_property_cache_sync(fe, &fepriv->parameters); memcpy (&fepriv->parameters, parg, sizeof (struct dvb_frontend_parameters)); } -- cgit v0.10.2 From 75b7f9437b1cf63750bb58efaaeb6d72d04b3c7f Mon Sep 17 00:00:00 2001 From: Steven Toth Date: Sat, 13 Sep 2008 16:56:34 -0300 Subject: V4L/DVB (9007): S2API: Changed bandwidth to be expressed in HZ Also added some compat code for the older API. Added more ISDB message/command suggestions, current not connected in dvb-core. Signed-off-by: Steven Toth Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/dvb/dvb-core/dvb_frontend.c b/drivers/media/dvb/dvb-core/dvb_frontend.c index 6b914f9..7dffb48 100644 --- a/drivers/media/dvb/dvb-core/dvb_frontend.c +++ b/drivers/media/dvb/dvb-core/dvb_frontend.c @@ -773,9 +773,9 @@ struct dtv_cmds_h dtv_cmds[] = { .cmd = DTV_FREQUENCY, .set = 1, }, - [DTV_BANDWIDTH] = { - .name = "DTV_BANDWIDTH", - .cmd = DTV_BANDWIDTH, + [DTV_BANDWIDTH_HZ] = { + .name = "DTV_BANDWIDTH_HZ", + .cmd = DTV_BANDWIDTH_HZ, .set = 1, }, [DTV_MODULATION] = { @@ -954,7 +954,15 @@ void dtv_property_cache_sync(struct dvb_frontend *fe, struct dvb_frontend_parame c->delivery_system = SYS_DVBC_ANNEX_AC; break; case FE_OFDM: - c->bandwidth = p->u.ofdm.bandwidth; + if (p->u.ofdm.bandwidth == BANDWIDTH_6_MHZ) + c->bandwidth_hz = 6000000; + else if (p->u.ofdm.bandwidth == BANDWIDTH_7_MHZ) + c->bandwidth_hz = 7000000; + else if (p->u.ofdm.bandwidth == BANDWIDTH_8_MHZ) + c->bandwidth_hz = 8000000; + else + /* Including BANDWIDTH_AUTO */ + c->bandwidth_hz = 0; c->code_rate_HP = p->u.ofdm.code_rate_HP; c->code_rate_LP = p->u.ofdm.code_rate_LP; c->modulation = p->u.ofdm.constellation; @@ -1003,7 +1011,14 @@ void dtv_property_legacy_params_sync(struct dvb_frontend *fe) break; case FE_OFDM: printk("%s() Preparing OFDM req\n", __FUNCTION__); - p->u.ofdm.bandwidth = c->bandwidth; + if (c->bandwidth_hz == 6000000) + p->u.ofdm.bandwidth = BANDWIDTH_6_MHZ; + else if (c->bandwidth_hz == 7000000) + p->u.ofdm.bandwidth = BANDWIDTH_7_MHZ; + else if (c->bandwidth_hz == 8000000) + p->u.ofdm.bandwidth = BANDWIDTH_8_MHZ; + else + p->u.ofdm.bandwidth = BANDWIDTH_AUTO; p->u.ofdm.code_rate_HP = c->code_rate_HP; p->u.ofdm.code_rate_LP = c->code_rate_LP; p->u.ofdm.constellation = c->modulation; @@ -1118,8 +1133,8 @@ int dtv_property_process_get(struct dvb_frontend *fe, struct dtv_property *tvp, case DTV_MODULATION: tvp->u.data = fe->dtv_property_cache.modulation; break; - case DTV_BANDWIDTH: - tvp->u.data = fe->dtv_property_cache.bandwidth; + case DTV_BANDWIDTH_HZ: + tvp->u.data = fe->dtv_property_cache.bandwidth_hz; break; case DTV_INVERSION: tvp->u.data = fe->dtv_property_cache.inversion; @@ -1230,8 +1245,8 @@ int dtv_property_process_set(struct dvb_frontend *fe, struct dtv_property *tvp, case DTV_MODULATION: fe->dtv_property_cache.modulation = tvp->u.data; break; - case DTV_BANDWIDTH: - fe->dtv_property_cache.bandwidth = tvp->u.data; + case DTV_BANDWIDTH_HZ: + fe->dtv_property_cache.bandwidth_hz = tvp->u.data; break; case DTV_INVERSION: fe->dtv_property_cache.inversion = tvp->u.data; diff --git a/drivers/media/dvb/dvb-core/dvb_frontend.h b/drivers/media/dvb/dvb-core/dvb_frontend.h index 784e8fe1..2fa37f5 100644 --- a/drivers/media/dvb/dvb-core/dvb_frontend.h +++ b/drivers/media/dvb/dvb-core/dvb_frontend.h @@ -198,7 +198,7 @@ struct dtv_frontend_properties { fe_spectral_inversion_t inversion; fe_code_rate_t fec_inner; fe_transmit_mode_t transmission_mode; - fe_bandwidth_t bandwidth; + u32 bandwidth_hz; /* 0 = AUTO */ fe_guard_interval_t guard_interval; fe_hierarchy_t hierarchy; u32 symbol_rate; diff --git a/include/linux/dvb/frontend.h b/include/linux/dvb/frontend.h index 05bdec9..4f3fd641 100644 --- a/include/linux/dvb/frontend.h +++ b/include/linux/dvb/frontend.h @@ -257,7 +257,12 @@ typedef enum dtv_cmd_types { DTV_FREQUENCY, DTV_MODULATION, - DTV_BANDWIDTH, + + /* XXX PB: I would like to have field which describes the + * bandwidth of a channel in Hz or kHz - maybe we can remove the + * DTV_BANDWIDTH now and put a compat layer */ + DTV_BANDWIDTH_HZ, + DTV_INVERSION, DTV_DISEQC_MASTER, DTV_SYMBOL_RATE, @@ -276,18 +281,34 @@ typedef enum dtv_cmd_types { /* New commands are always appended */ DTV_DELIVERY_SYSTEM, - /* ISDB-T */ + /* ISDB */ + /* maybe a dup of DTV_ISDB_SOUND_BROADCASTING_SUBCHANNEL_ID ??? */ DTV_ISDB_SEGMENT_IDX, - DTV_ISDB_SEGMENT_WIDTH, + DTV_ISDB_SEGMENT_WIDTH, /* 1, 3 or 13 ??? */ + + /* the central segment can be received independently or 1/3 seg in SB-mode */ + DTV_ISDB_PARTIAL_RECEPTION, + /* sound broadcasting is used 0 = 13segment, 1 = 1 or 3 see DTV_ISDB_PARTIAL_RECEPTION */ + DTV_ISDB_SOUND_BROADCASTING, + + /* only used in SB */ + /* determines the initial PRBS of the segment (to match with 13seg channel) */ + DTV_ISDB_SOUND_BROADCASTING_SUBCHANNEL_ID, + DTV_ISDB_LAYERA_FEC, DTV_ISDB_LAYERA_MODULATION, DTV_ISDB_LAYERA_SEGMENT_WIDTH, + DTV_ISDB_LAYERA_TIME_INTERLEAVER, + DTV_ISDB_LAYERB_FEC, DTV_ISDB_LAYERB_MODULATION, DTV_ISDB_LAYERB_SEGMENT_WIDTH, + DTV_ISDB_LAYERB_TIME_INTERLEAVING, + DTV_ISDB_LAYERC_FEC, DTV_ISDB_LAYERC_MODULATION, DTV_ISDB_LAYERC_SEGMENT_WIDTH, + DTV_ISDB_LAYERC_TIME_INTERLEAVING, } dtv_cmd_types_t; -- cgit v0.10.2 From 1d78cac4779be3ae6bef4791b3b12928e2499fef Mon Sep 17 00:00:00 2001 From: Steven Toth Date: Sat, 13 Sep 2008 18:15:17 -0300 Subject: V4L/DVB (9008): S2API: Bugfix related to syncing the cache when used with the old API. Many thanks to Darron Broad for pointing out the obvious. Signed-off-by: Steven Toth Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/dvb/dvb-core/dvb_frontend.c b/drivers/media/dvb/dvb-core/dvb_frontend.c index 7dffb48..05d0b73 100644 --- a/drivers/media/dvb/dvb-core/dvb_frontend.c +++ b/drivers/media/dvb/dvb-core/dvb_frontend.c @@ -1595,9 +1595,9 @@ static int dvb_frontend_ioctl_legacy(struct inode *inode, struct file *file, break; } - dtv_property_cache_sync(fe, &fepriv->parameters); memcpy (&fepriv->parameters, parg, sizeof (struct dvb_frontend_parameters)); + dtv_property_cache_sync(fe, &fepriv->parameters); } memset(&fetunesettings, 0, sizeof(struct dvb_frontend_tune_settings)); -- cgit v0.10.2 From 83fe92e71ef736a26a6eedd0822b34ed5af077f0 Mon Sep 17 00:00:00 2001 From: Steven Toth Date: Sat, 13 Sep 2008 19:22:15 -0300 Subject: V4L/DVB (9009): Nova-se2 / Nova-s-plus Intersil6421 power fix to support switches. Signed-off-by: Steven Toth Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/cx88/cx88-dvb.c b/drivers/media/video/cx88/cx88-dvb.c index 5ff6e9d..891acb5 100644 --- a/drivers/media/video/cx88/cx88-dvb.c +++ b/drivers/media/video/cx88/cx88-dvb.c @@ -847,7 +847,7 @@ static int dvb_register(struct cx8802_dev *dev) &core->i2c_adap); if (dev->dvb.frontend) { if (!dvb_attach(isl6421_attach, dev->dvb.frontend, - &core->i2c_adap, 0x08, 0x00, 0x00)) + &core->i2c_adap, 0x08, ISL6421_DCL, 0x00)) goto frontend_detach; } break; @@ -950,7 +950,7 @@ static int dvb_register(struct cx8802_dev *dev) } break; case CX88_BOARD_TEVII_S460: - dev->dvb.frontend = dvb_attach(cx24116_attach, + dev->dvb.frontend = dvb_attach(cx24116_attach, &tevii_s460_config, &core->i2c_adap); if (dev->dvb.frontend != NULL) { -- cgit v0.10.2 From a611d0ca006fe76d88b8dd5ac44f4468293b6760 Mon Sep 17 00:00:00 2001 From: "Igor M. Liplianin" Date: Sat, 13 Sep 2008 10:10:53 -0300 Subject: V4L/DVB (9010): Add support for SDMC DM1105 PCI chip Add support for SDMC DM1105 PCI chip. There is a lot of cards based on it, like DvbWorld 2002 DVB-S , 2004 DVB-S2 Signed-off-by: Igor M. Liplianin Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/dvb/Kconfig b/drivers/media/dvb/Kconfig index 8bc1445..5858744 100644 --- a/drivers/media/dvb/Kconfig +++ b/drivers/media/dvb/Kconfig @@ -35,6 +35,10 @@ comment "Supported Pluto2 Adapters" depends on DVB_CORE && PCI && I2C source "drivers/media/dvb/pluto2/Kconfig" +comment "Supported SDMC DM1105 Adapters" + depends on DVB_CORE && PCI && I2C +source "drivers/media/dvb/dm1105/Kconfig" + comment "Supported DVB Frontends" depends on DVB_CORE source "drivers/media/dvb/frontends/Kconfig" diff --git a/drivers/media/dvb/Makefile b/drivers/media/dvb/Makefile index d6ba4d1..ea953a0 100644 --- a/drivers/media/dvb/Makefile +++ b/drivers/media/dvb/Makefile @@ -2,4 +2,4 @@ # Makefile for the kernel multimedia device drivers. # -obj-y := dvb-core/ frontends/ ttpci/ ttusb-dec/ ttusb-budget/ b2c2/ bt8xx/ cinergyT2/ dvb-usb/ pluto2/ siano/ +obj-y := dvb-core/ frontends/ ttpci/ ttusb-dec/ ttusb-budget/ b2c2/ bt8xx/ cinergyT2/ dvb-usb/ pluto2/ siano/ dm1105/ diff --git a/drivers/media/dvb/dm1105/Kconfig b/drivers/media/dvb/dm1105/Kconfig new file mode 100644 index 0000000..fc2ca7d --- /dev/null +++ b/drivers/media/dvb/dm1105/Kconfig @@ -0,0 +1,14 @@ +config DVB_DM1105 + tristate "SDMC DM1105 based PCI cards" + depends on DVB_CORE && PCI && I2C + select DVB_PLL if !DVB_FE_CUSTOMISE + select DVB_STV0299 if !DVB_FE_CUSTOMISE + help + Support for cards based on the SDMC DM1105 PCI chip like + DvbWorld 2002 + + Since these cards have no MPEG decoder onboard, they transmit + only compressed MPEG data over the PCI bus, so you need + an external software decoder to watch TV on your computer. + + Say Y or M if you own such a device and want to use it. diff --git a/drivers/media/dvb/dm1105/Makefile b/drivers/media/dvb/dm1105/Makefile new file mode 100644 index 0000000..8ac28b0 --- /dev/null +++ b/drivers/media/dvb/dm1105/Makefile @@ -0,0 +1,3 @@ +obj-$(CONFIG_DVB_DM1105) += dm1105.o + +EXTRA_CFLAGS += -Idrivers/media/dvb/dvb-core/ -Idrivers/media/dvb/frontends diff --git a/drivers/media/dvb/dm1105/dm1105.c b/drivers/media/dvb/dm1105/dm1105.c new file mode 100644 index 0000000..fe8d0e5 --- /dev/null +++ b/drivers/media/dvb/dm1105/dm1105.c @@ -0,0 +1,917 @@ +/* + * dm1105.c - driver for DVB cards based on SDMC DM1105 PCI chip + * + * Copyright (C) 2008 Igor M. Liplianin + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "demux.h" +#include "dmxdev.h" +#include "dvb_demux.h" +#include "dvb_frontend.h" +#include "dvb_net.h" +#include "dvbdev.h" +#include "dvb-pll.h" + +#include "stv0299.h" +/*#include "stv0288.h" + *#include "si21xx.h" + *#include "stb6000.h" + *#include "cx24116.h"*/ +#include "z0194a.h" + +/* ----------------------------------------------- */ +/* + * PCI ID's + */ +#ifndef PCI_VENDOR_ID_TRIGEM +#define PCI_VENDOR_ID_TRIGEM 0x109f +#endif +#ifndef PCI_DEVICE_ID_DM1105 +#define PCI_DEVICE_ID_DM1105 0x036f +#endif +#ifndef PCI_DEVICE_ID_DW2002 +#define PCI_DEVICE_ID_DW2002 0x2002 +#endif +#ifndef PCI_DEVICE_ID_DW2004 +#define PCI_DEVICE_ID_DW2004 0x2004 +#endif +/* ----------------------------------------------- */ +/* sdmc dm1105 registers */ + +/* TS Control */ +#define DM1105_TSCTR 0x00 +#define DM1105_DTALENTH 0x04 + +/* GPIO Interface */ +#define DM1105_GPIOVAL 0x08 +#define DM1105_GPIOCTR 0x0c + +/* PID serial number */ +#define DM1105_PIDN 0x10 + +/* Odd-even secret key select */ +#define DM1105_CWSEL 0x14 + +/* Host Command Interface */ +#define DM1105_HOST_CTR 0x18 +#define DM1105_HOST_AD 0x1c + +/* PCI Interface */ +#define DM1105_CR 0x30 +#define DM1105_RST 0x34 +#define DM1105_STADR 0x38 +#define DM1105_RLEN 0x3c +#define DM1105_WRP 0x40 +#define DM1105_INTCNT 0x44 +#define DM1105_INTMAK 0x48 +#define DM1105_INTSTS 0x4c + +/* CW Value */ +#define DM1105_ODD 0x50 +#define DM1105_EVEN 0x58 + +/* PID Value */ +#define DM1105_PID 0x60 + +/* IR Control */ +#define DM1105_IRCTR 0x64 +#define DM1105_IRMODE 0x68 +#define DM1105_SYSTEMCODE 0x6c +#define DM1105_IRCODE 0x70 + +/* Unknown Values */ +#define DM1105_ENCRYPT 0x74 +#define DM1105_VER 0x7c + +/* I2C Interface */ +#define DM1105_I2CCTR 0x80 +#define DM1105_I2CSTS 0x81 +#define DM1105_I2CDAT 0x82 +#define DM1105_I2C_RA 0x83 +/* ----------------------------------------------- */ +/* Interrupt Mask Bits */ + +#define INTMAK_TSIRQM 0x01 +#define INTMAK_HIRQM 0x04 +#define INTMAK_IRM 0x08 +#define INTMAK_ALLMASK (INTMAK_TSIRQM | \ + INTMAK_HIRQM | \ + INTMAK_IRM) +#define INTMAK_NONEMASK 0x00 + +/* Interrupt Status Bits */ +#define INTSTS_TSIRQ 0x01 +#define INTSTS_HIRQ 0x04 +#define INTSTS_IR 0x08 + +/* IR Control Bits */ +#define DM1105_IR_EN 0x01 +#define DM1105_SYS_CHK 0x02 +#define DM1105_REP_FLG 0x08 + +/* EEPROM addr */ +#define IIC_24C01_addr 0xa0 +/* Max board count */ +#define DM1105_MAX 0x04 + +#define DRIVER_NAME "dm1105" + +#define DM1105_DMA_PACKETS 47 +#define DM1105_DMA_PACKET_LENGTH (128*4) +#define DM1105_DMA_BYTES (128 * 4 * DM1105_DMA_PACKETS) + +/* GPIO's for LNB power control */ +#define DM1105_LNB_MASK 0x00000000 +#define DM1105_LNB_13V 0x00010100 +#define DM1105_LNB_18V 0x00000100 + +static int ir_debug; +module_param(ir_debug, int, 0644); +MODULE_PARM_DESC(ir_debug, "enable debugging information for IR decoding"); + +DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); + +static u16 ir_codes_dm1105_nec[128] = { + [0x0a] = KEY_Q, /*power*/ + [0x0c] = KEY_M, /*mute*/ + [0x11] = KEY_1, + [0x12] = KEY_2, + [0x13] = KEY_3, + [0x14] = KEY_4, + [0x15] = KEY_5, + [0x16] = KEY_6, + [0x17] = KEY_7, + [0x18] = KEY_8, + [0x19] = KEY_9, + [0x10] = KEY_0, + [0x1c] = KEY_PAGEUP, /*ch+*/ + [0x0f] = KEY_PAGEDOWN, /*ch-*/ + [0x1a] = KEY_O, /*vol+*/ + [0x0e] = KEY_Z, /*vol-*/ + [0x04] = KEY_R, /*rec*/ + [0x09] = KEY_D, /*fav*/ + [0x08] = KEY_BACKSPACE, /*rewind*/ + [0x07] = KEY_A, /*fast*/ + [0x0b] = KEY_P, /*pause*/ + [0x02] = KEY_ESC, /*cancel*/ + [0x03] = KEY_G, /*tab*/ + [0x00] = KEY_UP, /*up*/ + [0x1f] = KEY_ENTER, /*ok*/ + [0x01] = KEY_DOWN, /*down*/ + [0x05] = KEY_C, /*cap*/ + [0x06] = KEY_S, /*stop*/ + [0x40] = KEY_F, /*full*/ + [0x1e] = KEY_W, /*tvmode*/ + [0x1b] = KEY_B, /*recall*/ +}; + +/* infrared remote control */ +struct infrared { + u16 key_map[128]; + struct input_dev *input_dev; + char input_phys[32]; + struct tasklet_struct ir_tasklet; + u32 ir_command; +}; + +struct dm1105dvb { + /* pci */ + struct pci_dev *pdev; + u8 __iomem *io_mem; + + /* ir */ + struct infrared ir; + + /* dvb */ + struct dmx_frontend hw_frontend; + struct dmx_frontend mem_frontend; + struct dmxdev dmxdev; + struct dvb_adapter dvb_adapter; + struct dvb_demux demux; + struct dvb_frontend *fe; + struct dvb_net dvbnet; + unsigned int full_ts_users; + + /* i2c */ + struct i2c_adapter i2c_adap; + + /* dma */ + dma_addr_t dma_addr; + unsigned char *ts_buf; + u32 wrp; + u32 buffer_size; + unsigned int PacketErrorCount; + unsigned int dmarst; + spinlock_t lock; + +}; + +#define dm_io_mem(reg) ((unsigned long)(&dm1105dvb->io_mem[reg])) + +static struct dm1105dvb *dm1105dvb_local; + +static int dm1105_i2c_xfer(struct i2c_adapter *i2c_adap, + struct i2c_msg *msgs, int num) +{ + struct dm1105dvb *dm1105dvb ; + + int addr, rc, i, j, k, len, byte, data; + u8 status; + + dm1105dvb = i2c_adap->algo_data; + for (i = 0; i < num; i++) { + outb(0x00, dm_io_mem(DM1105_I2CCTR)); + if (msgs[i].flags & I2C_M_RD) { + /* read bytes */ + addr = msgs[i].addr << 1; + addr |= 1; + outb(addr, dm_io_mem(DM1105_I2CDAT)); + for (byte = 0; byte < msgs[i].len; byte++) + outb(0, dm_io_mem(DM1105_I2CDAT + byte + 1)); + + outb(0x81 + msgs[i].len, dm_io_mem(DM1105_I2CCTR)); + for (j = 0; j < 55; j++) { + mdelay(10); + status = inb(dm_io_mem(DM1105_I2CSTS)); + if ((status & 0xc0) == 0x40) + break; + } + if (j >= 55) + return -1; + + for (byte = 0; byte < msgs[i].len; byte++) { + rc = inb(dm_io_mem(DM1105_I2CDAT + byte + 1)); + if (rc < 0) + goto err; + msgs[i].buf[byte] = rc; + } + } else { + if ((msgs[i].buf[0] == 0xf7) && (msgs[i].addr == 0x55)) { + /* prepaired for cx24116 firmware */ + /* Write in small blocks */ + len = msgs[i].len - 1; + k = 1; + do { + outb(msgs[i].addr << 1, dm_io_mem(DM1105_I2CDAT)); + outb(0xf7, dm_io_mem(DM1105_I2CDAT + 1)); + for (byte = 0; byte < (len > 48 ? 48 : len); byte++) { + data = msgs[i].buf[k+byte]; + outb(data, dm_io_mem(DM1105_I2CDAT + byte + 2)); + } + outb(0x82 + (len > 48 ? 48 : len), dm_io_mem(DM1105_I2CCTR)); + for (j = 0; j < 25; j++) { + mdelay(10); + status = inb(dm_io_mem(DM1105_I2CSTS)); + if ((status & 0xc0) == 0x40) + break; + } + + if (j >= 25) + return -1; + + k += 48; + len -= 48; + } while (len > 0); + } else { + /* write bytes */ + outb(msgs[i].addr<<1, dm_io_mem(DM1105_I2CDAT)); + for (byte = 0; byte < msgs[i].len; byte++) { + data = msgs[i].buf[byte]; + outb(data, dm_io_mem(DM1105_I2CDAT + byte + 1)); + } + outb(0x81 + msgs[i].len, dm_io_mem(DM1105_I2CCTR)); + for (j = 0; j < 25; j++) { + mdelay(10); + status = inb(dm_io_mem(DM1105_I2CSTS)); + if ((status & 0xc0) == 0x40) + break; + } + + if (j >= 25) + return -1; + } + } + } + return num; + err: + return rc; +} + +static u32 functionality(struct i2c_adapter *adap) +{ + return I2C_FUNC_I2C; +} + +static struct i2c_algorithm dm1105_algo = { + .master_xfer = dm1105_i2c_xfer, + .functionality = functionality, +}; + +static inline struct dm1105dvb *feed_to_dm1105dvb(struct dvb_demux_feed *feed) +{ + return container_of(feed->demux, struct dm1105dvb, demux); +} + +static inline struct dm1105dvb *frontend_to_dm1105dvb(struct dvb_frontend *fe) +{ + return container_of(fe->dvb, struct dm1105dvb, dvb_adapter); +} + +static int dm1105dvb_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage) +{ + struct dm1105dvb *dm1105dvb = frontend_to_dm1105dvb(fe); + + if (voltage == SEC_VOLTAGE_18) { + outl(DM1105_LNB_MASK, dm_io_mem(DM1105_GPIOCTR)); + outl(DM1105_LNB_18V, dm_io_mem(DM1105_GPIOVAL)); + } else { + /*LNB ON-13V by default!*/ + outl(DM1105_LNB_MASK, dm_io_mem(DM1105_GPIOCTR)); + outl(DM1105_LNB_13V, dm_io_mem(DM1105_GPIOVAL)); + } + + return 0; +} + +static void dm1105dvb_set_dma_addr(struct dm1105dvb *dm1105dvb) +{ + outl(cpu_to_le32(dm1105dvb->dma_addr), dm_io_mem(DM1105_STADR)); +} + +static int __devinit dm1105dvb_dma_map(struct dm1105dvb *dm1105dvb) +{ + dm1105dvb->ts_buf = pci_alloc_consistent(dm1105dvb->pdev, 6*DM1105_DMA_BYTES, &dm1105dvb->dma_addr); + + return pci_dma_mapping_error(dm1105dvb->pdev, dm1105dvb->dma_addr); +} + +static void dm1105dvb_dma_unmap(struct dm1105dvb *dm1105dvb) +{ + pci_free_consistent(dm1105dvb->pdev, 6*DM1105_DMA_BYTES, dm1105dvb->ts_buf, dm1105dvb->dma_addr); +} + +static void __devinit dm1105dvb_enable_irqs(struct dm1105dvb *dm1105dvb) +{ + outb(INTMAK_ALLMASK, dm_io_mem(DM1105_INTMAK)); + outb(1, dm_io_mem(DM1105_CR)); +} + +static void dm1105dvb_disable_irqs(struct dm1105dvb *dm1105dvb) +{ + outb(INTMAK_IRM, dm_io_mem(DM1105_INTMAK)); + outb(0, dm_io_mem(DM1105_CR)); +} + +static int dm1105dvb_start_feed(struct dvb_demux_feed *f) +{ + struct dm1105dvb *dm1105dvb = feed_to_dm1105dvb(f); + + if (dm1105dvb->full_ts_users++ == 0) + dm1105dvb_enable_irqs(dm1105dvb); + + return 0; +} + +static int dm1105dvb_stop_feed(struct dvb_demux_feed *f) +{ + struct dm1105dvb *dm1105dvb = feed_to_dm1105dvb(f); + + if (--dm1105dvb->full_ts_users == 0) + dm1105dvb_disable_irqs(dm1105dvb); + + return 0; +} + +/* ir tasklet */ +static void dm1105_emit_key(unsigned long parm) +{ + struct infrared *ir = (struct infrared *) parm; + u32 ircom = ir->ir_command; + u8 data; + u16 keycode; + + data = (ircom >> 8) & 0x7f; + + input_event(ir->input_dev, EV_MSC, MSC_RAW, (0x0000f8 << 16) | data); + input_event(ir->input_dev, EV_MSC, MSC_SCAN, data); + keycode = ir->key_map[data]; + + if (!keycode) + return; + + input_event(ir->input_dev, EV_KEY, keycode, 1); + input_sync(ir->input_dev); + input_event(ir->input_dev, EV_KEY, keycode, 0); + input_sync(ir->input_dev); + +} + +static irqreturn_t dm1105dvb_irq(int irq, void *dev_id) +{ + struct dm1105dvb *dm1105dvb = dev_id; + unsigned int piece; + unsigned int nbpackets; + u32 command; + u32 nextwrp; + u32 oldwrp; + + /* Read-Write INSTS Ack's Interrupt for DM1105 chip 16.03.2008 */ + unsigned int intsts = inb(dm_io_mem(DM1105_INTSTS)); + outb(intsts, dm_io_mem(DM1105_INTSTS)); + + switch (intsts) { + case INTSTS_TSIRQ: + case (INTSTS_TSIRQ | INTSTS_IR): + nextwrp = inl(dm_io_mem(DM1105_WRP)) - + inl(dm_io_mem(DM1105_STADR)) ; + oldwrp = dm1105dvb->wrp; + spin_lock(&dm1105dvb->lock); + if (!((dm1105dvb->ts_buf[oldwrp] == 0x47) && + (dm1105dvb->ts_buf[oldwrp + 188] == 0x47) && + (dm1105dvb->ts_buf[oldwrp + 188 * 2] == 0x47))) { + dm1105dvb->PacketErrorCount++; + /* bad packet found */ + if ((dm1105dvb->PacketErrorCount >= 2) && + (dm1105dvb->dmarst == 0)) { + outb(1, dm_io_mem(DM1105_RST)); + dm1105dvb->wrp = 0; + dm1105dvb->PacketErrorCount = 0; + dm1105dvb->dmarst = 0; + spin_unlock(&dm1105dvb->lock); + return IRQ_HANDLED; + } + } + if (nextwrp < oldwrp) { + piece = dm1105dvb->buffer_size - oldwrp; + memcpy(dm1105dvb->ts_buf + dm1105dvb->buffer_size, dm1105dvb->ts_buf, nextwrp); + nbpackets = (piece + nextwrp)/188; + } else { + nbpackets = (nextwrp - oldwrp)/188; + } + dvb_dmx_swfilter_packets(&dm1105dvb->demux, &dm1105dvb->ts_buf[oldwrp], nbpackets); + dm1105dvb->wrp = nextwrp; + spin_unlock(&dm1105dvb->lock); + break; + case INTSTS_IR: + command = inl(dm_io_mem(DM1105_IRCODE)); + if (ir_debug) + printk("dm1105: received byte 0x%04x\n", command); + + dm1105dvb->ir.ir_command = command; + tasklet_schedule(&dm1105dvb->ir.ir_tasklet); + break; + } + return IRQ_HANDLED; + + +} + +/* register with input layer */ +static void input_register_keys(struct infrared *ir) +{ + int i; + + memset(ir->input_dev->keybit, 0, sizeof(ir->input_dev->keybit)); + + for (i = 0; i < ARRAY_SIZE(ir->key_map); i++) + set_bit(ir->key_map[i], ir->input_dev->keybit); + + ir->input_dev->keycode = ir->key_map; + ir->input_dev->keycodesize = sizeof(ir->key_map[0]); + ir->input_dev->keycodemax = ARRAY_SIZE(ir->key_map); +} + +int __devinit dm1105_ir_init(struct dm1105dvb *dm1105) +{ + struct input_dev *input_dev; + int err; + + dm1105dvb_local = dm1105; + + input_dev = input_allocate_device(); + if (!input_dev) + return -ENOMEM; + + dm1105->ir.input_dev = input_dev; + snprintf(dm1105->ir.input_phys, sizeof(dm1105->ir.input_phys), + "pci-%s/ir0", pci_name(dm1105->pdev)); + + input_dev->evbit[0] = BIT(EV_KEY); + input_dev->name = "DVB on-card IR receiver"; + + input_dev->phys = dm1105->ir.input_phys; + input_dev->id.bustype = BUS_PCI; + input_dev->id.version = 2; + if (dm1105->pdev->subsystem_vendor) { + input_dev->id.vendor = dm1105->pdev->subsystem_vendor; + input_dev->id.product = dm1105->pdev->subsystem_device; + } else { + input_dev->id.vendor = dm1105->pdev->vendor; + input_dev->id.product = dm1105->pdev->device; + } + input_dev->dev.parent = &dm1105->pdev->dev; + /* initial keymap */ + memcpy(dm1105->ir.key_map, ir_codes_dm1105_nec, sizeof dm1105->ir.key_map); + input_register_keys(&dm1105->ir); + err = input_register_device(input_dev); + if (err) { + input_free_device(input_dev); + return err; + } + + tasklet_init(&dm1105->ir.ir_tasklet, dm1105_emit_key, (unsigned long) &dm1105->ir); + + return 0; +} + + +void __devexit dm1105_ir_exit(struct dm1105dvb *dm1105) +{ + tasklet_kill(&dm1105->ir.ir_tasklet); + input_unregister_device(dm1105->ir.input_dev); + +} + +static int __devinit dm1105dvb_hw_init(struct dm1105dvb *dm1105dvb) +{ + dm1105dvb_disable_irqs(dm1105dvb); + + outb(0, dm_io_mem(DM1105_HOST_CTR)); + + /*DATALEN 188,*/ + outb(188, dm_io_mem(DM1105_DTALENTH)); + /*TS_STRT TS_VALP MSBFIRST TS_MODE ALPAS TSPES*/ + outw(0xc10a, dm_io_mem(DM1105_TSCTR)); + + /* map DMA and set address */ + dm1105dvb_dma_map(dm1105dvb); + dm1105dvb_set_dma_addr(dm1105dvb); + /* big buffer */ + outl(5*DM1105_DMA_BYTES, dm_io_mem(DM1105_RLEN)); + outb(47, dm_io_mem(DM1105_INTCNT)); + + /* IR NEC mode enable */ + outb((DM1105_IR_EN | DM1105_SYS_CHK), dm_io_mem(DM1105_IRCTR)); + outb(0, dm_io_mem(DM1105_IRMODE)); + outw(0, dm_io_mem(DM1105_SYSTEMCODE)); + + return 0; +} + +static void dm1105dvb_hw_exit(struct dm1105dvb *dm1105dvb) +{ + dm1105dvb_disable_irqs(dm1105dvb); + + /* IR disable */ + outb(0, dm_io_mem(DM1105_IRCTR)); + outb(INTMAK_NONEMASK, dm_io_mem(DM1105_INTMAK)); + + dm1105dvb_dma_unmap(dm1105dvb); +} +#if 0 +static struct stv0288_config earda_config = { + .demod_address = 0x68, + .min_delay_ms = 100, +}; + +static struct si21xx_config serit_config = { + .demod_address = 0x68, + .min_delay_ms = 100, + +}; + +static struct cx24116_config serit_sp2633_config = { + .demod_address = 0x55, +}; +#endif /* keep */ + +static int __devinit frontend_init(struct dm1105dvb *dm1105dvb) +{ + int ret; + + switch (dm1105dvb->pdev->subsystem_device) { + case PCI_DEVICE_ID_DW2002: + dm1105dvb->fe = dvb_attach( + stv0299_attach, &sharp_z0194a_config, + &dm1105dvb->i2c_adap); + + if (dm1105dvb->fe) { + dm1105dvb->fe->ops.set_voltage = + dm1105dvb_set_voltage; + dvb_attach(dvb_pll_attach, dm1105dvb->fe, 0x60, + &dm1105dvb->i2c_adap, DVB_PLL_OPERA1); + } +#if 0 + if (!dm1105dvb->fe) { + dm1105dvb->fe = dvb_attach( + stv0288_attach, &earda_config, + &dm1105dvb->i2c_adap); + if (dm1105dvb->fe) { + dm1105dvb->fe->ops.set_voltage = + dm1105dvb_set_voltage; + dvb_attach(stb6000_attach, dm1105dvb->fe, 0x61, + &dm1105dvb->i2c_adap); + } + } + + if (!dm1105dvb->fe) { + dm1105dvb->fe = dvb_attach( + si21xx_attach, &serit_config, + &dm1105dvb->i2c_adap); + if (dm1105dvb->fe) + dm1105dvb->fe->ops.set_voltage = + dm1105dvb_set_voltage; + } +#endif /* keep */ + break; + case PCI_DEVICE_ID_DW2004: +#if 0 + dm1105dvb->fe = dvb_attach( + cx24116_attach, &serit_sp2633_config, + &dm1105dvb->i2c_adap); + if (dm1105dvb->fe) + dm1105dvb->fe->ops.set_voltage = dm1105dvb_set_voltage; +#else /* keep */ + dev_err(&dm1105dvb->pdev->dev, "needs cx24116 module\n"); +#endif /* keep */ + break; + } + + if (!dm1105dvb->fe) { + dev_err(&dm1105dvb->pdev->dev, "could not attach frontend\n"); + return -ENODEV; + } + + ret = dvb_register_frontend(&dm1105dvb->dvb_adapter, dm1105dvb->fe); + if (ret < 0) { + if (dm1105dvb->fe->ops.release) + dm1105dvb->fe->ops.release(dm1105dvb->fe); + dm1105dvb->fe = NULL; + return ret; + } + + return 0; +} + +static void __devinit dm1105dvb_read_mac(struct dm1105dvb *dm1105dvb, u8 *mac) +{ + static u8 command[1] = { 0x28 }; + + struct i2c_msg msg[] = { + { .addr = IIC_24C01_addr >> 1, .flags = 0, + .buf = command, .len = 1 }, + { .addr = IIC_24C01_addr >> 1, .flags = I2C_M_RD, + .buf = mac, .len = 6 }, + }; + + dm1105_i2c_xfer(&dm1105dvb->i2c_adap, msg , 2); + dev_info(&dm1105dvb->pdev->dev, "MAC %02x:%02x:%02x:%02x:%02x:%02x\n", + mac[0], mac[1], mac[2], mac[3], mac[4], mac[5]); +} + +static int __devinit dm1105_probe(struct pci_dev *pdev, + const struct pci_device_id *ent) +{ + struct dm1105dvb *dm1105dvb; + struct dvb_adapter *dvb_adapter; + struct dvb_demux *dvbdemux; + struct dmx_demux *dmx; + int ret = -ENOMEM; + + dm1105dvb = kzalloc(sizeof(struct dm1105dvb), GFP_KERNEL); + if (!dm1105dvb) + goto out; + + dm1105dvb->pdev = pdev; + dm1105dvb->buffer_size = 5 * DM1105_DMA_BYTES; + dm1105dvb->PacketErrorCount = 0; + dm1105dvb->dmarst = 0; + + ret = pci_enable_device(pdev); + if (ret < 0) + goto err_kfree; + + ret = pci_set_dma_mask(pdev, DMA_32BIT_MASK); + if (ret < 0) + goto err_pci_disable_device; + + pci_set_master(pdev); + + ret = pci_request_regions(pdev, DRIVER_NAME); + if (ret < 0) + goto err_pci_disable_device; + + dm1105dvb->io_mem = pci_iomap(pdev, 0, pci_resource_len(pdev, 0)); + if (!dm1105dvb->io_mem) { + ret = -EIO; + goto err_pci_release_regions; + } + + spin_lock_init(&dm1105dvb->lock); + pci_set_drvdata(pdev, dm1105dvb); + + ret = request_irq(pdev->irq, dm1105dvb_irq, IRQF_SHARED, DRIVER_NAME, dm1105dvb); + if (ret < 0) + goto err_pci_iounmap; + + ret = dm1105dvb_hw_init(dm1105dvb); + if (ret < 0) + goto err_free_irq; + + /* i2c */ + i2c_set_adapdata(&dm1105dvb->i2c_adap, dm1105dvb); + strcpy(dm1105dvb->i2c_adap.name, DRIVER_NAME); + dm1105dvb->i2c_adap.owner = THIS_MODULE; + dm1105dvb->i2c_adap.class = I2C_CLASS_TV_DIGITAL; + dm1105dvb->i2c_adap.dev.parent = &pdev->dev; + dm1105dvb->i2c_adap.algo = &dm1105_algo; + dm1105dvb->i2c_adap.algo_data = dm1105dvb; + ret = i2c_add_adapter(&dm1105dvb->i2c_adap); + + if (ret < 0) + goto err_dm1105dvb_hw_exit; + + /* dvb */ + ret = dvb_register_adapter(&dm1105dvb->dvb_adapter, DRIVER_NAME, + THIS_MODULE, &pdev->dev, adapter_nr); + if (ret < 0) + goto err_i2c_del_adapter; + + dvb_adapter = &dm1105dvb->dvb_adapter; + + dm1105dvb_read_mac(dm1105dvb, dvb_adapter->proposed_mac); + + dvbdemux = &dm1105dvb->demux; + dvbdemux->filternum = 256; + dvbdemux->feednum = 256; + dvbdemux->start_feed = dm1105dvb_start_feed; + dvbdemux->stop_feed = dm1105dvb_stop_feed; + dvbdemux->dmx.capabilities = (DMX_TS_FILTERING | + DMX_SECTION_FILTERING | DMX_MEMORY_BASED_FILTERING); + ret = dvb_dmx_init(dvbdemux); + if (ret < 0) + goto err_dvb_unregister_adapter; + + dmx = &dvbdemux->dmx; + dm1105dvb->dmxdev.filternum = 256; + dm1105dvb->dmxdev.demux = dmx; + dm1105dvb->dmxdev.capabilities = 0; + + ret = dvb_dmxdev_init(&dm1105dvb->dmxdev, dvb_adapter); + if (ret < 0) + goto err_dvb_dmx_release; + + dm1105dvb->hw_frontend.source = DMX_FRONTEND_0; + + ret = dmx->add_frontend(dmx, &dm1105dvb->hw_frontend); + if (ret < 0) + goto err_dvb_dmxdev_release; + + dm1105dvb->mem_frontend.source = DMX_MEMORY_FE; + + ret = dmx->add_frontend(dmx, &dm1105dvb->mem_frontend); + if (ret < 0) + goto err_remove_hw_frontend; + + ret = dmx->connect_frontend(dmx, &dm1105dvb->hw_frontend); + if (ret < 0) + goto err_remove_mem_frontend; + + ret = frontend_init(dm1105dvb); + if (ret < 0) + goto err_disconnect_frontend; + + dvb_net_init(dvb_adapter, &dm1105dvb->dvbnet, dmx); + dm1105_ir_init(dm1105dvb); +out: + return ret; + +err_disconnect_frontend: + dmx->disconnect_frontend(dmx); +err_remove_mem_frontend: + dmx->remove_frontend(dmx, &dm1105dvb->mem_frontend); +err_remove_hw_frontend: + dmx->remove_frontend(dmx, &dm1105dvb->hw_frontend); +err_dvb_dmxdev_release: + dvb_dmxdev_release(&dm1105dvb->dmxdev); +err_dvb_dmx_release: + dvb_dmx_release(dvbdemux); +err_dvb_unregister_adapter: + dvb_unregister_adapter(dvb_adapter); +err_i2c_del_adapter: + i2c_del_adapter(&dm1105dvb->i2c_adap); +err_dm1105dvb_hw_exit: + dm1105dvb_hw_exit(dm1105dvb); +err_free_irq: + free_irq(pdev->irq, dm1105dvb); +err_pci_iounmap: + pci_iounmap(pdev, dm1105dvb->io_mem); +err_pci_release_regions: + pci_release_regions(pdev); +err_pci_disable_device: + pci_disable_device(pdev); +err_kfree: + pci_set_drvdata(pdev, NULL); + kfree(dm1105dvb); + goto out; +} + +static void __devexit dm1105_remove(struct pci_dev *pdev) +{ + struct dm1105dvb *dm1105dvb = pci_get_drvdata(pdev); + struct dvb_adapter *dvb_adapter = &dm1105dvb->dvb_adapter; + struct dvb_demux *dvbdemux = &dm1105dvb->demux; + struct dmx_demux *dmx = &dvbdemux->dmx; + + dm1105_ir_exit(dm1105dvb); + dmx->close(dmx); + dvb_net_release(&dm1105dvb->dvbnet); + if (dm1105dvb->fe) + dvb_unregister_frontend(dm1105dvb->fe); + + dmx->disconnect_frontend(dmx); + dmx->remove_frontend(dmx, &dm1105dvb->mem_frontend); + dmx->remove_frontend(dmx, &dm1105dvb->hw_frontend); + dvb_dmxdev_release(&dm1105dvb->dmxdev); + dvb_dmx_release(dvbdemux); + dvb_unregister_adapter(dvb_adapter); + if (&dm1105dvb->i2c_adap) + i2c_del_adapter(&dm1105dvb->i2c_adap); + + dm1105dvb_hw_exit(dm1105dvb); + synchronize_irq(pdev->irq); + free_irq(pdev->irq, dm1105dvb); + pci_iounmap(pdev, dm1105dvb->io_mem); + pci_release_regions(pdev); + pci_disable_device(pdev); + pci_set_drvdata(pdev, NULL); + kfree(dm1105dvb); +} + +static struct pci_device_id dm1105_id_table[] __devinitdata = { + { + .vendor = PCI_VENDOR_ID_TRIGEM, + .device = PCI_DEVICE_ID_DM1105, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_DEVICE_ID_DW2002, + }, { + .vendor = PCI_VENDOR_ID_TRIGEM, + .device = PCI_DEVICE_ID_DM1105, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_DEVICE_ID_DW2004, + }, { + /* empty */ + }, +}; + +MODULE_DEVICE_TABLE(pci, dm1105_id_table); + +static struct pci_driver dm1105_driver = { + .name = DRIVER_NAME, + .id_table = dm1105_id_table, + .probe = dm1105_probe, + .remove = __devexit_p(dm1105_remove), +}; + +static int __init dm1105_init(void) +{ + return pci_register_driver(&dm1105_driver); +} + +static void __exit dm1105_exit(void) +{ + pci_unregister_driver(&dm1105_driver); +} + +module_init(dm1105_init); +module_exit(dm1105_exit); + +MODULE_AUTHOR("Igor M. Liplianin "); +MODULE_DESCRIPTION("SDMC DM1105 DVB driver"); +MODULE_LICENSE("GPL"); -- cgit v0.10.2 From 490c868408bc57a756550148313ac8582fe501ef Mon Sep 17 00:00:00 2001 From: Darron Broad Date: Sat, 13 Sep 2008 19:42:16 -0300 Subject: V4L/DVB (9011): S2API: A number of cleanusp from the last 24 months. I was given these changes by Darron Broad and Igor Liplianin and represent a series of patches they've been making to the cx24116 driver over the last two years. Changes for handling symbolrates >30Ksps Tone handling changes. Diseqc support. Sleep support, shutting down the clocks correctly. Cleanup on ROLL_OFF and PILOT support. *** ST - We need to cleanup the sysclt control, this is abnormal in a demod driver. We should work towards understanding the missing API's and ensure we have them in S2API. *** Signed-off-by: Steven Toth Signed-off-by: Darron Broad Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/dvb/frontends/cx24116.c b/drivers/media/dvb/frontends/cx24116.c index 0ac2c54..cfb265d 100644 --- a/drivers/media/dvb/frontends/cx24116.c +++ b/drivers/media/dvb/frontends/cx24116.c @@ -2,6 +2,18 @@ Conexant cx24116/cx24118 - DVBS/S2 Satellite demod/tuner driver Copyright (C) 2006-2008 Steven Toth + Copyright (C) 2006-2007 Georg Acher + Copyright (C) 2007-2008 Darron Broad + March 2007 + Fixed some bugs. + Added diseqc support. + Added corrected signal strength support. + August 2007 + Sync with legacy version. + Some clean ups. + Copyright (C) 2008 Igor Liplianin + September, 9th 2008 + Fixed locking on high symbol rates (>30000). This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by @@ -18,51 +30,69 @@ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ -/* - * Updates by Darron Broad 2007. - * - * March - * Fixed some bugs. - * Added diseqc support. - * Added corrected signal strength support. - * - * August - * Sync with legacy version. - * Some clean ups. - */ -/* Updates by Igor Liplianin - * - * September, 9th 2008 - * Fixed locking on high symbol rates (>30000). - */ - #include #include #include #include #include #include +#include #include "dvb_frontend.h" #include "cx24116.h" -/* - * Fetch firmware in the following manner. - * - * #!/bin/sh - * wget ftp://167.206.143.11/outgoing/Oxford/88x_2_117_24275_1_INF.zip - * unzip 88x_2_117_24275_1_INF.zip - * dd if=Driver88/hcw88bda.sys of=dvb-fe-cx24116.fw skip=81768 bs=1 count=32522 - */ +static int debug = 0; +#define dprintk(args...) \ + do { \ + if (debug) printk ("cx24116: " args); \ + } while (0) + #define CX24116_DEFAULT_FIRMWARE "dvb-fe-cx24116.fw" #define CX24116_SEARCH_RANGE_KHZ 5000 -/* registers (TO BE COMPLETED) */ -#define CX24116_REG_SIGNAL (0xd5) +/* known registers */ +#define CX24116_REG_COMMAND (0x00) /* command args 0x00..0x1e */ +#define CX24116_REG_EXECUTE (0x1f) /* execute command */ +#define CX24116_REG_MAILBOX (0x96) /* FW or multipurpose mailbox? */ +#define CX24116_REG_RESET (0x20) /* reset status > 0 */ +#define CX24116_REG_SIGNAL (0x9e) /* signal low */ +#define CX24116_REG_SSTATUS (0x9d) /* signal high / status */ +#define CX24116_REG_QSTATUS (0xbc) +#define CX24116_REG_QUALITY (0xd5) +#define CX24116_REG_BER0 (0xc9) +#define CX24116_REG_BER8 (0xc8) +#define CX24116_REG_BER16 (0xc7) +#define CX24116_REG_BER24 (0xc6) +#define CX24116_REG_UCB0 (0xcb) +#define CX24116_REG_UCB8 (0xca) +#define CX24116_REG_CLKDIV (0xf3) +#define CX24116_REG_RATEDIV (0xf9) /* arg buffer size */ #define CX24116_ARGLEN (0x1e) +/* rolloff */ +#define CX24116_ROLLOFF_020 (0x00) +#define CX24116_ROLLOFF_025 (0x01) +#define CX24116_ROLLOFF_035 (0x02) + +/* pilot bit */ +#define CX24116_PILOT (0x40) + +/* signal status */ +#define CX24116_HAS_SIGNAL (0x01) +#define CX24116_HAS_CARRIER (0x02) +#define CX24116_HAS_VITERBI (0x04) +#define CX24116_HAS_SYNCLOCK (0x08) +#define CX24116_HAS_UNKNOWN1 (0x10) +#define CX24116_HAS_UNKNOWN2 (0x20) +#define CX24116_STATUS_MASK (0x3f) +#define CX24116_SIGNAL_MASK (0xc0) + +#define CX24116_DISEQC_TONEOFF (0) /* toneburst never sent */ +#define CX24116_DISEQC_TONECACHE (1) /* toneburst cached */ +#define CX24116_DISEQC_MESGCACHE (2) /* message cached */ + /* arg offset for DiSEqC */ #define CX24116_DISEQC_BURST (1) #define CX24116_DISEQC_ARG2_2 (2) /* unknown value=2 */ @@ -75,21 +105,88 @@ #define CX24116_DISEQC_MINI_A (0) #define CX24116_DISEQC_MINI_B (1) -static int debug = 0; -#define dprintk(args...) \ - do { \ - if (debug) printk ("cx24116: " args); \ - } while (0) +/* DiSEqC tone burst */ +static int toneburst = 1; + +/* debug & toneburst sysctl */ +static struct ctl_table_header *kernel_table_header; +static ctl_table toneburst_table[] = { +{ + .ctl_name = 0, + .procname = "toneburst", + .data = &toneburst, + .maxlen = sizeof(int), + .mode = 0666, + .child = NULL, + .parent = NULL, + .proc_handler = &proc_dointvec, + .strategy = NULL, + .extra1 = NULL, + .extra2 = NULL, +}, +{ + .ctl_name = 0, + .procname = "debug", + .data = &debug, + .maxlen = sizeof(int), + .mode = 0666, + .child = NULL, + .parent = NULL, + .proc_handler = &proc_dointvec, + .strategy = NULL, + .extra1 = NULL, + .extra2 = NULL, + }, + {0}, +}; +static ctl_table cx24116_table[] = { +{ + .ctl_name = 0, + .procname = "cx24116", + .data = NULL, + .maxlen = 0, + .mode = 0555, + .child = toneburst_table, + .parent = NULL, + .proc_handler = NULL, + .strategy = NULL, + .extra1 = NULL, + .extra2 = NULL, + }, + {0}, +}; +static ctl_table kernel_table[] = { +{ + .ctl_name = CTL_DEV, + .procname = "dev", + .data = NULL, + .maxlen = 0, + .mode = 0555, + .child = cx24116_table, + .parent = NULL, + .proc_handler = NULL, + .strategy = NULL, + .extra1 = NULL, + .extra2 = NULL, + }, + {0}, +}; enum cmds { - CMD_INIT_CMD10 = 0x10, + CMD_SET_VCO = 0x10, CMD_TUNEREQUEST = 0x11, - CMD_INIT_CMD13 = 0x13, - CMD_INIT_CMD14 = 0x14, - CMD_SEND_DISEQC = 0x21, + CMD_MPEGCONFIG = 0x13, + CMD_TUNERINIT = 0x14, + CMD_BANDWIDTH = 0x15, + CMD_GETAGC = 0x19, + CMD_LNBCONFIG = 0x20, + CMD_LNBSEND = 0x21, /* Formerly CMD_SEND_DISEQC */ CMD_SET_TONEPRE = 0x22, CMD_SET_TONE = 0x23, + CMD_UPDFWVERS = 0x35, + CMD_TUNERSLEEP = 0x36, + CMD_AGCCONTROL = 0x3b, /* Unknown */ }; /* The Demod/Tuner can't easily provide these, we cache them */ @@ -101,11 +198,14 @@ struct cx24116_tuning fe_code_rate_t fec; fe_modulation_t modulation; + fe_pilot_t pilot; + fe_rolloff_t rolloff; /* Demod values */ u8 fec_val; u8 fec_mask; u8 inversion_val; + u8 rolloff_val; }; /* Basic commands that are sent to the firmware */ @@ -127,6 +227,7 @@ struct cx24116_state u8 skip_fw_load; u8 burst; + struct cx24116_cmd dsec_cmd; }; static int cx24116_writereg(struct cx24116_state* state, int reg, int data) @@ -233,6 +334,66 @@ static int cx24116_set_inversion(struct cx24116_state* state, fe_spectral_invers return 0; } +/* + * modfec (modulation and FEC) + * =========================== + * + * MOD FEC mask/val standard + * ---- -------- ----------- -------- + * QPSK FEC_1_2 0x02 0x02+X DVB-S + * QPSK FEC_2_3 0x04 0x02+X DVB-S + * QPSK FEC_3_4 0x08 0x02+X DVB-S + * QPSK FEC_4_5 0x10 0x02+X DVB-S (?) + * QPSK FEC_5_6 0x20 0x02+X DVB-S + * QPSK FEC_6_7 0x40 0x02+X DVB-S + * QPSK FEC_7_8 0x80 0x02+X DVB-S + * QPSK FEC_8_9 0x01 0x02+X DVB-S (?) (NOT SUPPORTED?) + * QPSK AUTO 0xff 0x02+X DVB-S + * + * For DVB-S high byte probably represents FEC + * and low byte selects the modulator. The high + * byte is search range mask. Bit 5 may turn + * on DVB-S and remaining bits represent some + * kind of calibration (how/what i do not know). + * + * Eg.(2/3) szap "Zone Horror" + * + * mask/val = 0x04, 0x20 + * status 1f | signal c3c0 | snr a333 | ber 00000098 | unc 00000000 | FE_HAS_LOCK + * + * mask/val = 0x04, 0x30 + * status 1f | signal c3c0 | snr a333 | ber 00000000 | unc 00000000 | FE_HAS_LOCK + * + * After tuning FECSTATUS contains actual FEC + * in use numbered 1 through to 8 for 1/2 .. 2/3 etc + * + * NBC=NOT/NON BACKWARD COMPATIBLE WITH DVB-S (DVB-S2 only) + * + * NBC-QPSK FEC_1_2 0x00, 0x04 DVB-S2 + * NBC-QPSK FEC_3_5 0x00, 0x05 DVB-S2 + * NBC-QPSK FEC_2_3 0x00, 0x06 DVB-S2 + * NBC-QPSK FEC_3_4 0x00, 0x07 DVB-S2 + * NBC-QPSK FEC_4_5 0x00, 0x08 DVB-S2 + * NBC-QPSK FEC_5_6 0x00, 0x09 DVB-S2 + * NBC-QPSK FEC_8_9 0x00, 0x0a DVB-S2 + * NBC-QPSK FEC_9_10 0x00, 0x0b DVB-S2 + * + * NBC-8PSK FEC_3_5 0x00, 0x0c DVB-S2 + * NBC-8PSK FEC_2_3 0x00, 0x0d DVB-S2 + * NBC-8PSK FEC_3_4 0x00, 0x0e DVB-S2 + * NBC-8PSK FEC_5_6 0x00, 0x0f DVB-S2 + * NBC-8PSK FEC_8_9 0x00, 0x10 DVB-S2 + * NBC-8PSK FEC_9_10 0x00, 0x11 DVB-S2 + * + * For DVB-S2 low bytes selects both modulator + * and FEC. High byte is meaningless here. To + * set pilot, bit 6 (0x40) is set. When inspecting + * FECSTATUS bit 7 (0x80) represents the pilot + * selection whilst not tuned. When tuned, actual FEC + * in use is found in FECSTATUS as per above. Pilot + * value is reset. + */ + /* A table of modulation, fec and configuration bytes for the demod. * Not all S2 mmodulation schemes are support and not all rates with * a scheme are support. Especially, no auto detect when in S2 mode. @@ -244,15 +405,17 @@ struct cx24116_modfec { u8 val; /* Passed to the firmware to indicate mode selection */ } CX24116_MODFEC_MODES[] = { /* QPSK. For unknown rates we set hardware to auto detect 0xfe 0x30 */ + + /*mod fec mask val */ { QPSK, FEC_NONE, 0xfe, 0x30 }, - { QPSK, FEC_1_2, 0x02, 0x2e }, - { QPSK, FEC_2_3, 0x04, 0x2f }, - { QPSK, FEC_3_4, 0x08, 0x30 }, - { QPSK, FEC_4_5, 0xfe, 0x30 }, - { QPSK, FEC_5_6, 0x20, 0x31 }, - { QPSK, FEC_6_7, 0xfe, 0x30 }, - { QPSK, FEC_7_8, 0x80, 0x32 }, - { QPSK, FEC_8_9, 0xfe, 0x30 }, + { QPSK, FEC_1_2, 0x02, 0x2e }, /* 00000010 00101110 */ + { QPSK, FEC_2_3, 0x04, 0x2f }, /* 00000100 00101111 */ + { QPSK, FEC_3_4, 0x08, 0x30 }, /* 00001000 00110000 */ + { QPSK, FEC_4_5, 0xfe, 0x30 }, /* 000?0000 ? */ + { QPSK, FEC_5_6, 0x20, 0x31 }, /* 00100000 00110001 */ + { QPSK, FEC_6_7, 0xfe, 0x30 }, /* 0?000000 ? */ + { QPSK, FEC_7_8, 0x80, 0x32 }, /* 10000000 00110010 */ + { QPSK, FEC_8_9, 0xfe, 0x30 }, /* 0000000? ? */ { QPSK, FEC_AUTO, 0xfe, 0x30 }, /* NBC-QPSK */ { NBC_QPSK, FEC_1_2, 0x00, 0x04 }, @@ -268,7 +431,12 @@ struct cx24116_modfec { { _8PSK, FEC_2_3, 0x00, 0x0d }, { _8PSK, FEC_3_4, 0x00, 0x0e }, { _8PSK, FEC_5_6, 0x00, 0x0f }, + { _8PSK, FEC_8_9, 0x00, 0x10 }, { _8PSK, FEC_9_10, 0x00, 0x11 }, + /* + * `val' can be found in the FECSTATUS register when tuning. + * FECSTATUS will give the actual FEC in use if tuning was successful. + */ }; static int cx24116_lookup_fecmod(struct cx24116_state* state, @@ -276,6 +444,8 @@ static int cx24116_lookup_fecmod(struct cx24116_state* state, { int i, ret = -EOPNOTSUPP; + dprintk("%s(0x%02x,0x%02x)\n", __func__, m, f); + for(i=0 ; i < sizeof(CX24116_MODFEC_MODES) / sizeof(struct cx24116_modfec) ; i++) { if( (m == CX24116_MODFEC_MODES[i].modulation) && @@ -292,37 +462,38 @@ static int cx24116_lookup_fecmod(struct cx24116_state* state, static int cx24116_set_fec(struct cx24116_state* state, fe_modulation_t mod, fe_code_rate_t fec) { int ret = 0; - dprintk("%s()\n", __func__); + + dprintk("%s(0x%02x,0x%02x)\n", __func__, mod, fec); ret = cx24116_lookup_fecmod(state, mod, fec); if(ret < 0) return ret; + state->dnxt.fec = fec; state->dnxt.fec_val = CX24116_MODFEC_MODES[ret].val; state->dnxt.fec_mask = CX24116_MODFEC_MODES[ret].mask; - dprintk("%s() fec_val/mask = 0x%02x/0x%02x\n", __func__, - state->dnxt.fec_val, state->dnxt.fec_mask); + dprintk("%s() mask/val = 0x%02x/0x%02x\n", __func__, + state->dnxt.fec_mask, state->dnxt.fec_val); return 0; } static int cx24116_set_symbolrate(struct cx24116_state* state, u32 rate) { - int ret = 0; + dprintk("%s(%d)\n", __func__, rate); - dprintk("%s()\n", __func__); + /* check if symbol rate is within limits */ + if ((rate > state->frontend.ops.info.symbol_rate_max) || + (rate < state->frontend.ops.info.symbol_rate_min)) { + dprintk("%s() unsupported symbol_rate = %d\n", __func__, rate); + return -EOPNOTSUPP; + } state->dnxt.symbol_rate = rate; + dprintk("%s() symbol_rate = %d\n", __func__, rate); - dprintk("%s() symbol_rate = %d\n", __func__, state->dnxt.symbol_rate); - - /* check if symbol rate is within limits */ - if ((state->dnxt.symbol_rate > state->frontend.ops.info.symbol_rate_max) || - (state->dnxt.symbol_rate < state->frontend.ops.info.symbol_rate_min)) - ret = -EOPNOTSUPP; - - return ret; + return 0; } static int cx24116_load_firmware (struct dvb_frontend* fe, const struct firmware *fw); @@ -392,8 +563,8 @@ static int cx24116_cmd_execute(struct dvb_frontend* fe, struct cx24116_cmd *cmd) } /* Start execution and wait for cmd to terminate */ - cx24116_writereg(state, 0x1f, 0x01); - while( cx24116_readreg(state, 0x1f) ) + cx24116_writereg(state, CX24116_REG_EXECUTE, 0x01); + while( cx24116_readreg(state, CX24116_REG_EXECUTE) ) { msleep(10); if(i++ > 64) @@ -410,7 +581,8 @@ static int cx24116_load_firmware (struct dvb_frontend* fe, const struct firmware { struct cx24116_state* state = fe->demodulator_priv; struct cx24116_cmd cmd; - int ret; + int i, ret; + unsigned char vers[4]; dprintk("%s\n", __func__); dprintk("Firmware is %zu bytes (%02x %02x .. %02x %02x)\n" @@ -427,11 +599,21 @@ static int cx24116_load_firmware (struct dvb_frontend* fe, const struct firmware /* Begin the firmware load process */ /* Prepare the demod, load the firmware, cleanup after load */ + + /* Init PLL */ + cx24116_writereg(state, 0xE5, 0x00); cx24116_writereg(state, 0xF1, 0x08); - cx24116_writereg(state, 0xF2, cx24116_readreg(state, 0xF2) | 0x03); - cx24116_writereg(state, 0xF3, 0x46); - cx24116_writereg(state, 0xF9, 0x00); + cx24116_writereg(state, 0xF2, 0x13); + + /* Start PLL */ + cx24116_writereg(state, 0xe0, 0x03); + cx24116_writereg(state, 0xe0, 0x00); + + /* Unknown */ + cx24116_writereg(state, CX24116_REG_CLKDIV, 0x46); + cx24116_writereg(state, CX24116_REG_RATEDIV, 0x00); + /* Unknown */ cx24116_writereg(state, 0xF0, 0x03); cx24116_writereg(state, 0xF4, 0x81); cx24116_writereg(state, 0xF5, 0x00); @@ -444,8 +626,8 @@ static int cx24116_load_firmware (struct dvb_frontend* fe, const struct firmware cx24116_writereg(state, 0xF0, 0x00); cx24116_writereg(state, 0xF8, 0x06); - /* Firmware CMD 10: Chip config? */ - cmd.args[0x00] = CMD_INIT_CMD10; + /* Firmware CMD 10: VCO config */ + cmd.args[0x00] = CMD_SET_VCO; cmd.args[0x01] = 0x05; cmd.args[0x02] = 0xdc; cmd.args[0x03] = 0xda; @@ -460,10 +642,10 @@ static int cx24116_load_firmware (struct dvb_frontend* fe, const struct firmware if (ret != 0) return ret; - cx24116_writereg(state, 0x9d, 0x00); + cx24116_writereg(state, CX24116_REG_SSTATUS, 0x00); - /* Firmware CMD 14: Unknown */ - cmd.args[0x00] = CMD_INIT_CMD14; + /* Firmware CMD 14: Tuner config */ + cmd.args[0x00] = CMD_TUNERINIT; cmd.args[0x01] = 0x00; cmd.args[0x02] = 0x00; cmd.len= 0x03; @@ -473,8 +655,8 @@ static int cx24116_load_firmware (struct dvb_frontend* fe, const struct firmware cx24116_writereg(state, 0xe5, 0x00); - /* Firmware CMD 13: Unknown - Firmware config? */ - cmd.args[0x00] = CMD_INIT_CMD13; + /* Firmware CMD 13: MPEG config */ + cmd.args[0x00] = CMD_MPEGCONFIG; cmd.args[0x01] = 0x01; cmd.args[0x02] = 0x75; cmd.args[0x03] = 0x00; @@ -488,6 +670,19 @@ static int cx24116_load_firmware (struct dvb_frontend* fe, const struct firmware if (ret != 0) return ret; + /* Firmware CMD 35: Get firmware version */ + cmd.args[0x00] = CMD_UPDFWVERS; + cmd.len= 0x02; + for(i=0; i<4; i++) { + cmd.args[0x01] = i; + ret = cx24116_cmd_execute(fe, &cmd); + if (ret != 0) + return ret; + vers[i]= cx24116_readreg(state, CX24116_REG_MAILBOX); + } + printk("%s: FW version %i.%i.%i.%i\n", __func__, + vers[0], vers[1], vers[2], vers[3]); + return 0; } @@ -503,75 +698,98 @@ static int cx24116_read_status(struct dvb_frontend* fe, fe_status_t* status) { struct cx24116_state *state = fe->demodulator_priv; - int lock = cx24116_readreg(state, 0x9d); + int lock = cx24116_readreg(state, CX24116_REG_SSTATUS); dprintk("%s: status = 0x%02x\n", __func__, lock); *status = 0; - if (lock & 0x01) + if (lock & CX24116_HAS_SIGNAL) *status |= FE_HAS_SIGNAL; - if (lock & 0x02) + if (lock & CX24116_HAS_CARRIER) *status |= FE_HAS_CARRIER; - if (lock & 0x04) + if (lock & CX24116_HAS_VITERBI) *status |= FE_HAS_VITERBI; - if (lock & 0x08) + if (lock & CX24116_HAS_SYNCLOCK) *status |= FE_HAS_SYNC | FE_HAS_LOCK; return 0; } -/* TODO: Not clear how we do this */ static int cx24116_read_ber(struct dvb_frontend* fe, u32* ber) { - //struct cx24116_state *state = fe->demodulator_priv; + struct cx24116_state *state = fe->demodulator_priv; + dprintk("%s()\n", __func__); - *ber = 0; + + *ber = ( cx24116_readreg(state, CX24116_REG_BER24) << 24 ) | + ( cx24116_readreg(state, CX24116_REG_BER16) << 16 ) | + ( cx24116_readreg(state, CX24116_REG_BER8 ) << 8 ) | + cx24116_readreg(state, CX24116_REG_BER0 ); return 0; } -/* Signal strength (0..100)% = (sig & 0xf0) * 10 + (sig & 0x0f) * 10 / 16 */ +/* TODO Determine function and scale appropriately */ static int cx24116_read_signal_strength(struct dvb_frontend* fe, u16* signal_strength) { struct cx24116_state *state = fe->demodulator_priv; - u8 strength_reg; - static const u32 strength_tab[] = { /* 10 x Table (rounded up) */ - 0x00000,0x0199A,0x03333,0x04ccD,0x06667,0x08000,0x0999A,0x0b333,0x0cccD,0x0e667, - 0x10000,0x1199A,0x13333,0x14ccD,0x16667,0x18000 }; + struct cx24116_cmd cmd; + int ret; + u16 sig_reading; dprintk("%s()\n", __func__); - strength_reg = cx24116_readreg(state, CX24116_REG_SIGNAL); + /* Firmware CMD 19: Get AGC */ + cmd.args[0x00] = CMD_GETAGC; + cmd.len= 0x01; + ret = cx24116_cmd_execute(fe, &cmd); + if (ret != 0) + return ret; - if(strength_reg < 0xa0) - *signal_strength = strength_tab [ ( strength_reg & 0xf0 ) >> 4 ] + - ( strength_tab [ ( strength_reg & 0x0f ) ] >> 4 ); - else - *signal_strength = 0xffff; + sig_reading = ( cx24116_readreg(state, CX24116_REG_SSTATUS) & CX24116_SIGNAL_MASK ) | + ( cx24116_readreg(state, CX24116_REG_SIGNAL) << 6 ); + *signal_strength= 0 - sig_reading; - dprintk("%s: Signal strength (raw / cooked) = (0x%02x / 0x%04x)\n", - __func__,strength_reg,*signal_strength); + dprintk("%s: raw / cooked = 0x%04x / 0x%04x\n", __func__, sig_reading, *signal_strength); return 0; } -/* TODO: Not clear how we do this */ +/* SNR (0..100)% = (sig & 0xf0) * 10 + (sig & 0x0f) * 10 / 16 */ static int cx24116_read_snr(struct dvb_frontend* fe, u16* snr) { - //struct cx24116_state *state = fe->demodulator_priv; + struct cx24116_state *state = fe->demodulator_priv; + u8 snr_reading; + static const u32 snr_tab[] = { /* 10 x Table (rounded up) */ + 0x00000,0x0199A,0x03333,0x04ccD,0x06667, + 0x08000,0x0999A,0x0b333,0x0cccD,0x0e667, + 0x10000,0x1199A,0x13333,0x14ccD,0x16667,0x18000 }; + dprintk("%s()\n", __func__); - *snr = 0; + + snr_reading = cx24116_readreg(state, CX24116_REG_QUALITY); + + if(snr_reading >= 0xa0 /* 100% */) + *snr = 0xffff; + else + *snr = snr_tab [ ( snr_reading & 0xf0 ) >> 4 ] + + ( snr_tab [ ( snr_reading & 0x0f ) ] >> 4 ); + + dprintk("%s: raw / cooked = 0x%02x / 0x%04x\n", __func__, + snr_reading, *snr); return 0; } -/* TODO: Not clear how we do this */ static int cx24116_read_ucblocks(struct dvb_frontend* fe, u32* ucblocks) { - //struct cx24116_state *state = fe->demodulator_priv; + struct cx24116_state *state = fe->demodulator_priv; + dprintk("%s()\n", __func__); - *ucblocks = 0; + + *ucblocks = ( cx24116_readreg(state, CX24116_REG_UCB8) << 8 ) | + cx24116_readreg(state, CX24116_REG_UCB0); return 0; } @@ -583,6 +801,27 @@ static void cx24116_clone_params(struct dvb_frontend* fe) memcpy(&state->dcur, &state->dnxt, sizeof(state->dcur)); } +/* Wait for LNB */ +static int cx24116_wait_for_lnb(struct dvb_frontend* fe) +{ + struct cx24116_state *state = fe->demodulator_priv; + int i; + + dprintk("%s() qstatus = 0x%02x\n", __func__, + cx24116_readreg(state, CX24116_REG_QSTATUS)); + + /* Wait for up to 300 ms */ + for(i = 0; i < 30 ; i++) { + if (cx24116_readreg(state, CX24116_REG_QSTATUS) & 0x20) + return 0; + msleep(10); + } + + dprintk("%s(): LNB not ready\n", __func__); + + return -ETIMEDOUT; /* -EBUSY ? */ +} + static int cx24116_set_tone(struct dvb_frontend* fe, fe_sec_tone_mode_t tone) { struct cx24116_cmd cmd; @@ -594,6 +833,14 @@ static int cx24116_set_tone(struct dvb_frontend* fe, fe_sec_tone_mode_t tone) return -EINVAL; } + /* Wait for LNB ready */ + ret = cx24116_wait_for_lnb(fe); + if(ret != 0) + return ret; + + /* Min delay time after DiSEqC send */ + msleep(15); /* XXX determine is FW does this, see send_diseqc/burst */ + /* This is always done before the tone is set */ cmd.args[0x00] = CMD_SET_TONEPRE; cmd.args[0x01] = 0x00; @@ -619,6 +866,9 @@ static int cx24116_set_tone(struct dvb_frontend* fe, fe_sec_tone_mode_t tone) } cmd.len= 0x04; + /* Min delay time before DiSEqC send */ + msleep(15); /* XXX determine is FW does this, see send_diseqc/burst */ + return cx24116_cmd_execute(fe, &cmd); } @@ -626,9 +876,39 @@ static int cx24116_set_tone(struct dvb_frontend* fe, fe_sec_tone_mode_t tone) static int cx24116_diseqc_init(struct dvb_frontend* fe) { struct cx24116_state *state = fe->demodulator_priv; + struct cx24116_cmd cmd; + int ret; + + /* Firmware CMD 20: LNB/DiSEqC config */ + cmd.args[0x00] = CMD_LNBCONFIG; + cmd.args[0x01] = 0x00; + cmd.args[0x02] = 0x10; + cmd.args[0x03] = 0x00; + cmd.args[0x04] = 0x8f; + cmd.args[0x05] = 0x28; + cmd.args[0x06] = (toneburst == CX24116_DISEQC_TONEOFF) ? 0x00 : 0x01; + cmd.args[0x07] = 0x01; + cmd.len= 0x08; + ret = cx24116_cmd_execute(fe, &cmd); + if (ret != 0) + return ret; + + /* Prepare a DiSEqC command */ + state->dsec_cmd.args[0x00] = CMD_LNBSEND; + + /* DiSEqC burst */ + state->dsec_cmd.args[CX24116_DISEQC_BURST] = CX24116_DISEQC_MINI_A; + + /* Unknown */ + state->dsec_cmd.args[CX24116_DISEQC_ARG2_2] = 0x02; + state->dsec_cmd.args[CX24116_DISEQC_ARG3_0] = 0x00; + state->dsec_cmd.args[CX24116_DISEQC_ARG4_0] = 0x00; /* Continuation flag? */ - /* Default DiSEqC burst state */ - state->burst = CX24116_DISEQC_MINI_A; + /* DiSEqC message length */ + state->dsec_cmd.args[CX24116_DISEQC_MSGLEN] = 0x00; + + /* Command length */ + state->dsec_cmd.len= CX24116_DISEQC_MSGOFS; return 0; } @@ -637,7 +917,6 @@ static int cx24116_diseqc_init(struct dvb_frontend* fe) static int cx24116_send_diseqc_msg(struct dvb_frontend* fe, struct dvb_diseqc_master_cmd *d) { struct cx24116_state *state = fe->demodulator_priv; - struct cx24116_cmd cmd; int i, ret; /* Dump DiSEqC message */ @@ -647,82 +926,134 @@ static int cx24116_send_diseqc_msg(struct dvb_frontend* fe, struct dvb_diseqc_ma printk("0x%02x", d->msg[i]); if(++i < d->msg_len) printk(", "); - } - printk(")\n"); + } + printk(") toneburst=%d\n", toneburst); } + /* Validate length */ if(d->msg_len > (CX24116_ARGLEN - CX24116_DISEQC_MSGOFS)) return -EINVAL; - cmd.args[0x00] = CMD_SEND_DISEQC; - cmd.args[CX24116_DISEQC_ARG2_2] = 0x02; - cmd.args[CX24116_DISEQC_ARG3_0] = 0x00; - cmd.args[CX24116_DISEQC_ARG4_0] = 0x00; - /* DiSEqC message */ for (i = 0; i < d->msg_len; i++) - cmd.args[CX24116_DISEQC_MSGOFS + i] = d->msg[i]; + state->dsec_cmd.args[CX24116_DISEQC_MSGOFS + i] = d->msg[i]; + + /* DiSEqC message length */ + state->dsec_cmd.args[CX24116_DISEQC_MSGLEN] = d->msg_len; + + /* Command length */ + state->dsec_cmd.len= CX24116_DISEQC_MSGOFS + state->dsec_cmd.args[CX24116_DISEQC_MSGLEN]; + + /* DiSEqC toneburst */ + if(toneburst == CX24116_DISEQC_MESGCACHE) + /* Message is cached */ + return 0; + + else if(toneburst == CX24116_DISEQC_TONEOFF) + /* Message is sent without burst */ + state->dsec_cmd.args[CX24116_DISEQC_BURST] = 0; + + else if(toneburst == CX24116_DISEQC_TONECACHE) { + /* + * Message is sent with derived else cached burst + * + * WRITE PORT GROUP COMMAND 38 + * + * 0/A/A: E0 10 38 F0..F3 + * 1/B/B: E0 10 38 F4..F7 + * 2/C/A: E0 10 38 F8..FB + * 3/D/B: E0 10 38 FC..FF + * + * datebyte[3]= 8421:8421 + * ABCD:WXYZ + * CLR :SET + * + * WX= PORT SELECT 0..3 (X=TONEBURST) + * Y = VOLTAGE (0=13V, 1=18V) + * Z = BAND (0=LOW, 1=HIGH(22K)) + */ + if(d->msg_len >= 4 && d->msg[2] == 0x38) + state->dsec_cmd.args[CX24116_DISEQC_BURST] = ((d->msg[3] & 4) >> 2); + if(debug) + dprintk("%s burst=%d\n", __func__, state->dsec_cmd.args[CX24116_DISEQC_BURST]); + } - /* Hack: Derive burst from command else use previous burst */ - if(d->msg_len >= 4 && d->msg[2] == 0x38) - cmd.args[CX24116_DISEQC_BURST] = (d->msg[3] >> 2) & 1; - else - cmd.args[CX24116_DISEQC_BURST] = state->burst; + /* Wait for LNB ready */ + ret = cx24116_wait_for_lnb(fe); + if(ret != 0) + return ret; - cmd.args[CX24116_DISEQC_MSGLEN] = d->msg_len; - cmd.len = CX24116_DISEQC_MSGOFS + d->msg_len; + /* Wait for voltage/min repeat delay */ + msleep(100); - ret = cx24116_cmd_execute(fe, &cmd); - - /* Firmware command duration is unknown, so guess... + /* Command */ + ret = cx24116_cmd_execute(fe, &state->dsec_cmd); + if(ret != 0) + return ret; + /* + * Wait for send * * Eutelsat spec: - * >15ms delay + - * 13.5ms per byte + - * >15ms delay + - * 12.5ms burst + - * >15ms delay + * >15ms delay + (XXX determine if FW does this, see set_tone) + * 13.5ms per byte + + * >15ms delay + + * 12.5ms burst + + * >15ms delay (XXX determine if FW does this, see set_tone) */ - if(ret == 0) - msleep( (cmd.args[CX24116_DISEQC_MSGLEN] << 4) + 60 ); + msleep( (state->dsec_cmd.args[CX24116_DISEQC_MSGLEN] << 4) + ((toneburst == CX24116_DISEQC_TONEOFF) ? 30 : 60) ); - return ret; + return 0; } /* Send DiSEqC burst */ static int cx24116_diseqc_send_burst(struct dvb_frontend* fe, fe_sec_mini_cmd_t burst) { struct cx24116_state *state = fe->demodulator_priv; - struct cx24116_cmd cmd; int ret; - dprintk("%s(%d)\n",__func__,(int)burst); - - cmd.args[0x00] = CMD_SEND_DISEQC; - cmd.args[CX24116_DISEQC_ARG2_2] = 0x02; - cmd.args[CX24116_DISEQC_ARG3_0] = 0x00; - cmd.args[CX24116_DISEQC_ARG4_0] = 0x00; + dprintk("%s(%d) toneburst=%d\n",__func__, burst, toneburst); + /* DiSEqC burst */ if (burst == SEC_MINI_A) - cmd.args[CX24116_DISEQC_BURST] = CX24116_DISEQC_MINI_A; + state->dsec_cmd.args[CX24116_DISEQC_BURST] = CX24116_DISEQC_MINI_A; else if(burst == SEC_MINI_B) - cmd.args[CX24116_DISEQC_BURST] = CX24116_DISEQC_MINI_B; + state->dsec_cmd.args[CX24116_DISEQC_BURST] = CX24116_DISEQC_MINI_B; else return -EINVAL; - /* Cache as previous burst state */ - state->burst= cmd.args[CX24116_DISEQC_BURST]; + /* DiSEqC toneburst */ + if(toneburst != CX24116_DISEQC_MESGCACHE) + /* Burst is cached */ + return 0; - cmd.args[CX24116_DISEQC_MSGLEN] = 0x00; - cmd.len= CX24116_DISEQC_MSGOFS; + /* Burst is to be sent with cached message */ - ret= cx24116_cmd_execute(fe, &cmd); + /* Wait for LNB ready */ + ret = cx24116_wait_for_lnb(fe); + if(ret != 0) + return ret; - /* Firmware command duration is unknown, so guess... */ - if(ret == 0) - msleep(60); + /* Wait for voltage/min repeat delay */ + msleep(100); - return ret; + /* Command */ + ret = cx24116_cmd_execute(fe, &state->dsec_cmd); + if(ret != 0) + return ret; + + /* + * Wait for send + * + * Eutelsat spec: + * >15ms delay + (XXX determine if FW does this, see set_tone) + * 13.5ms per byte + + * >15ms delay + + * 12.5ms burst + + * >15ms delay (XXX determine if FW does this, see set_tone) + */ + msleep( (state->dsec_cmd.args[CX24116_DISEQC_MSGLEN] << 4) + 60 ); + + return 0; } static void cx24116_release(struct dvb_frontend* fe) @@ -730,6 +1061,7 @@ static void cx24116_release(struct dvb_frontend* fe) struct cx24116_state* state = fe->demodulator_priv; dprintk("%s\n",__func__); kfree(state); + unregister_sysctl_table(kernel_table_header); } static struct dvb_frontend_ops cx24116_ops; @@ -742,11 +1074,15 @@ struct dvb_frontend* cx24116_attach(const struct cx24116_config* config, dprintk("%s\n",__func__); + kernel_table_header = register_sysctl_table(kernel_table); + if(!kernel_table_header) + goto error1; + /* allocate memory for the internal state */ state = kmalloc(sizeof(struct cx24116_state), GFP_KERNEL); if (state == NULL) { printk("Unable to kmalloc\n"); - goto error; + goto error2; } /* setup the state */ @@ -759,7 +1095,7 @@ struct dvb_frontend* cx24116_attach(const struct cx24116_config* config, ret = (cx24116_readreg(state, 0xFF) << 8) | cx24116_readreg(state, 0xFE); if (ret != 0x0501) { printk("Invalid probe, probably not a CX24116 device\n"); - goto error; + goto error3; } /* create dvb_frontend */ @@ -767,33 +1103,64 @@ struct dvb_frontend* cx24116_attach(const struct cx24116_config* config, state->frontend.demodulator_priv = state; return &state->frontend; -error: - kfree(state); - - return NULL; +error3: kfree(state); +error2: unregister_sysctl_table(kernel_table_header); +error1: return NULL; } - -static int cx24116_get_params(struct dvb_frontend* fe) +/* + * Initialise or wake up device + * + * Power config will reset and load initial firmware if required + */ +static int cx24116_initfe(struct dvb_frontend* fe) { - struct cx24116_state *state = fe->demodulator_priv; - struct dtv_frontend_properties *cache = &fe->dtv_property_cache; + struct cx24116_state* state = fe->demodulator_priv; + struct cx24116_cmd cmd; + int ret; dprintk("%s()\n",__func__); - cache->frequency = state->dcur.frequency; - cache->inversion = state->dcur.inversion; - cache->modulation = state->dcur.modulation; - cache->fec_inner = state->dcur.fec; - cache->symbol_rate = state->dcur.symbol_rate; + /* Power on */ + cx24116_writereg(state, 0xe0, 0); + cx24116_writereg(state, 0xe1, 0); + cx24116_writereg(state, 0xea, 0); - return 0; + /* Firmware CMD 36: Power config */ + cmd.args[0x00] = CMD_TUNERSLEEP; + cmd.args[0x01] = 0; + cmd.len= 0x02; + ret = cx24116_cmd_execute(fe, &cmd); + if(ret != 0) + return ret; + + return cx24116_diseqc_init(fe); } -static int cx24116_initfe(struct dvb_frontend* fe) +/* + * Put device to sleep + */ +static int cx24116_sleep(struct dvb_frontend* fe) { + struct cx24116_state* state = fe->demodulator_priv; + struct cx24116_cmd cmd; + int ret; + dprintk("%s()\n",__func__); - return cx24116_diseqc_init(fe); + /* Firmware CMD 36: Power config */ + cmd.args[0x00] = CMD_TUNERSLEEP; + cmd.args[0x01] = 1; + cmd.len= 0x02; + ret = cx24116_cmd_execute(fe, &cmd); + if(ret != 0) + return ret; + + /* Power off (Shutdown clocks) */ + cx24116_writereg(state, 0xea, 0xff); + cx24116_writereg(state, 0xe1, 1); + cx24116_writereg(state, 0xe0, 1); + + return 0; } static int cx24116_set_property(struct dvb_frontend *fe, struct dtv_property* tvp) @@ -817,14 +1184,45 @@ static int cx24116_set_frontend(struct dvb_frontend* fe, struct dvb_frontend_par struct dtv_frontend_properties *c = &fe->dtv_property_cache; struct cx24116_cmd cmd; fe_status_t tunerstat; - int ret, above30msps; - u8 retune=4; + int i, status, ret, retune = 1; dprintk("%s()\n",__func__); state->dnxt.modulation = c->modulation; state->dnxt.frequency = c->frequency; + switch(c->delivery_system) { + case SYS_DVBS: + dprintk("%s: DVB-S delivery system selected\n",__func__); + state->dnxt.pilot = PILOT_OFF; + state->dnxt.rolloff = CX24116_ROLLOFF_035; + break; + case SYS_DVBS2: + dprintk("%s: DVB-S2 delivery system selected\n",__func__); + if(c->pilot == PILOT_AUTO) + retune++; + state->dnxt.pilot = c->pilot; + switch(c->rolloff) { + case ROLLOFF_20: + state->dnxt.rolloff_val= CX24116_ROLLOFF_020; + break; + case ROLLOFF_25: + state->dnxt.rolloff_val= CX24116_ROLLOFF_025; + break; + case ROLLOFF_35: + state->dnxt.rolloff_val= CX24116_ROLLOFF_035; + break; + case ROLLOFF_AUTO: + return -EOPNOTSUPP; + } + state->dnxt.rolloff = c->rolloff; + break; + default: + dprintk("%s: unsupported delivery system selected (%d)\n", + __func__, c->delivery_system); + return -EOPNOTSUPP; + } + if ((ret = cx24116_set_inversion(state, c->inversion)) != 0) return ret; @@ -837,6 +1235,9 @@ static int cx24116_set_frontend(struct dvb_frontend* fe, struct dvb_frontend_par /* discard the 'current' tuning parameters and prepare to tune */ cx24116_clone_params(fe); + dprintk("%s: retune = %d\n", __func__, retune); + dprintk("%s: rolloff = %d\n", __func__, state->dcur.rolloff); + dprintk("%s: pilot = %d\n", __func__, state->dcur.pilot); dprintk("%s: frequency = %d\n", __func__, state->dcur.frequency); dprintk("%s: symbol_rate = %d\n", __func__, state->dcur.symbol_rate); dprintk("%s: FEC = %d (mask/val = 0x%02x/0x%02x)\n", __func__, @@ -844,18 +1245,17 @@ static int cx24116_set_frontend(struct dvb_frontend* fe, struct dvb_frontend_par dprintk("%s: Inversion = %d (val = 0x%02x)\n", __func__, state->dcur.inversion, state->dcur.inversion_val); + /* This is also done in advise/acquire on HVR4000 but not on LITE */ if (state->config->set_ts_params) state->config->set_ts_params(fe, 0); - above30msps = (state->dcur.symbol_rate > 30000000); - - if (above30msps){ - cx24116_writereg(state, 0xF9, 0x01); - cx24116_writereg(state, 0xF3, 0x44); - } else { - cx24116_writereg(state, 0xF9, 0x00); - cx24116_writereg(state, 0xF3, 0x46); - } + /* Set/Reset B/W */ + cmd.args[0x00] = CMD_BANDWIDTH; + cmd.args[0x01] = 0x01; + cmd.len= 0x02; + ret = cx24116_cmd_execute(fe, &cmd); + if (ret != 0) + return ret; /* Prepare a tune request */ cmd.args[0x00] = CMD_TUNEREQUEST; @@ -875,28 +1275,32 @@ static int cx24116_set_frontend(struct dvb_frontend* fe, struct dvb_frontend_par /* Modulation / FEC & Pilot Off */ cmd.args[0x07] = state->dcur.fec_val; - if (c->pilot == PILOT_ON) - cmd.args[0x07] |= 0x40; + if (state->dcur.pilot == PILOT_ON) + cmd.args[0x07] |= CX24116_PILOT; cmd.args[0x08] = CX24116_SEARCH_RANGE_KHZ >> 8; cmd.args[0x09] = CX24116_SEARCH_RANGE_KHZ & 0xff; cmd.args[0x0a] = 0x00; cmd.args[0x0b] = 0x00; - cmd.args[0x0c] = 0x02; + cmd.args[0x0c] = state->dcur.rolloff_val; cmd.args[0x0d] = state->dcur.fec_mask; - if (above30msps){ + if (state->dcur.symbol_rate > 30000000) { cmd.args[0x0e] = 0x04; cmd.args[0x0f] = 0x00; cmd.args[0x10] = 0x01; cmd.args[0x11] = 0x77; cmd.args[0x12] = 0x36; + cx24116_writereg(state, CX24116_REG_CLKDIV, 0x44); + cx24116_writereg(state, CX24116_REG_RATEDIV, 0x01); } else { cmd.args[0x0e] = 0x06; cmd.args[0x0f] = 0x00; cmd.args[0x10] = 0x00; cmd.args[0x11] = 0xFA; cmd.args[0x12] = 0x24; + cx24116_writereg(state, CX24116_REG_CLKDIV, 0x46); + cx24116_writereg(state, CX24116_REG_RATEDIV, 0x00); } cmd.len= 0x13; @@ -906,29 +1310,47 @@ static int cx24116_set_frontend(struct dvb_frontend* fe, struct dvb_frontend_par * the demod does not support autodetect. */ do { - /* Reset status register? */ - cx24116_writereg(state, 0x9d, 0xc1); + /* Reset status register */ + status = cx24116_readreg(state, CX24116_REG_SSTATUS) & CX24116_SIGNAL_MASK; + cx24116_writereg(state, CX24116_REG_SSTATUS, status); /* Tune */ ret = cx24116_cmd_execute(fe, &cmd); if( ret != 0 ) break; - /* The hardware can take time to lock, wait a while */ - msleep(500); - - cx24116_read_status(fe, &tunerstat); - if(tunerstat & FE_HAS_SIGNAL) { - if(tunerstat & FE_HAS_SYNC) - /* Tuned */ - break; - else if(c->pilot == PILOT_AUTO) - /* Toggle pilot bit */ - cmd.args[0x07] ^= 0x40; + /* + * Wait for up to 500 ms before retrying + * + * If we are able to tune then generally it occurs within 100ms. + * If it takes longer, try a different toneburst setting. + */ + for(i = 0; i < 50 ; i++) { + cx24116_read_status(fe, &tunerstat); + status = tunerstat & (FE_HAS_SIGNAL | FE_HAS_SYNC); + if(status == (FE_HAS_SIGNAL | FE_HAS_SYNC)) { + dprintk("%s: Tuned\n",__func__); + goto tuned; + } + msleep(10); } + + dprintk("%s: Not tuned\n",__func__); + + /* Toggle pilot bit when in auto-pilot */ + if(state->dcur.pilot == PILOT_AUTO) + cmd.args[0x07] ^= CX24116_PILOT; } while(--retune); +tuned: /* Set/Reset B/W */ + cmd.args[0x00] = CMD_BANDWIDTH; + cmd.args[0x01] = 0x00; + cmd.len= 0x02; + ret = cx24116_cmd_execute(fe, &cmd); + if (ret != 0) + return ret; + return ret; } @@ -953,6 +1375,7 @@ static struct dvb_frontend_ops cx24116_ops = { .release = cx24116_release, .init = cx24116_initfe, + .sleep = cx24116_sleep, .read_status = cx24116_read_status, .read_ber = cx24116_read_ber, .read_signal_strength = cx24116_read_signal_strength, @@ -971,6 +1394,9 @@ static struct dvb_frontend_ops cx24116_ops = { module_param(debug, int, 0644); MODULE_PARM_DESC(debug, "Activates frontend debugging (default:0)"); +module_param(toneburst, int, 0644); +MODULE_PARM_DESC(toneburst, "DiSEqC toneburst 0=OFF, 1=TONE CACHE, 2=MESSAGE CACHE (default:1)"); + MODULE_DESCRIPTION("DVB Frontend module for Conexant cx24116/cx24118 hardware"); MODULE_AUTHOR("Steven Toth"); MODULE_LICENSE("GPL"); -- cgit v0.10.2 From 35d9c42779ef5e8cb46902bb6987443e136c0517 Mon Sep 17 00:00:00 2001 From: "Igor M. Liplianin" Date: Sat, 13 Sep 2008 20:56:59 -0300 Subject: V4L/DVB (9012): Add support for DvbWorld 2004 DVB-S2 PCI adapter Add support for DvbWorld 2004 DVB-S2 PCI adapter. The card contains dm1105 PCI chip and cx24116 demodulator Signed-off-by: Igor M. Liplianin Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/dvb/Kconfig b/drivers/media/dvb/Kconfig index 5858744..14488f6 100644 --- a/drivers/media/dvb/Kconfig +++ b/drivers/media/dvb/Kconfig @@ -36,7 +36,7 @@ comment "Supported Pluto2 Adapters" source "drivers/media/dvb/pluto2/Kconfig" comment "Supported SDMC DM1105 Adapters" - depends on DVB_CORE && PCI && I2C + depends on DVB_CORE && PCI && I2C source "drivers/media/dvb/dm1105/Kconfig" comment "Supported DVB Frontends" diff --git a/drivers/media/dvb/dm1105/Kconfig b/drivers/media/dvb/dm1105/Kconfig index fc2ca7d..4b96bbb 100644 --- a/drivers/media/dvb/dm1105/Kconfig +++ b/drivers/media/dvb/dm1105/Kconfig @@ -1,14 +1,15 @@ config DVB_DM1105 - tristate "SDMC DM1105 based PCI cards" - depends on DVB_CORE && PCI && I2C + tristate "SDMC DM1105 based PCI cards" + depends on DVB_CORE && PCI && I2C select DVB_PLL if !DVB_FE_CUSTOMISE select DVB_STV0299 if !DVB_FE_CUSTOMISE - help - Support for cards based on the SDMC DM1105 PCI chip like - DvbWorld 2002 + select DVB_CX24116 if !DVB_FE_CUSTOMISE + help + Support for cards based on the SDMC DM1105 PCI chip like + DvbWorld 2002 - Since these cards have no MPEG decoder onboard, they transmit - only compressed MPEG data over the PCI bus, so you need - an external software decoder to watch TV on your computer. + Since these cards have no MPEG decoder onboard, they transmit + only compressed MPEG data over the PCI bus, so you need + an external software decoder to watch TV on your computer. - Say Y or M if you own such a device and want to use it. + Say Y or M if you own such a device and want to use it. diff --git a/drivers/media/dvb/dm1105/dm1105.c b/drivers/media/dvb/dm1105/dm1105.c index fe8d0e5..204763d 100644 --- a/drivers/media/dvb/dm1105/dm1105.c +++ b/drivers/media/dvb/dm1105/dm1105.c @@ -41,8 +41,8 @@ #include "stv0299.h" /*#include "stv0288.h" *#include "si21xx.h" - *#include "stb6000.h" - *#include "cx24116.h"*/ + *#include "stb6000.h"*/ +#include "cx24116.h" #include "z0194a.h" /* ----------------------------------------------- */ @@ -605,11 +605,11 @@ static struct si21xx_config serit_config = { .min_delay_ms = 100, }; +#endif /* keep */ static struct cx24116_config serit_sp2633_config = { .demod_address = 0x55, }; -#endif /* keep */ static int __devinit frontend_init(struct dm1105dvb *dm1105dvb) { @@ -651,15 +651,11 @@ static int __devinit frontend_init(struct dm1105dvb *dm1105dvb) #endif /* keep */ break; case PCI_DEVICE_ID_DW2004: -#if 0 dm1105dvb->fe = dvb_attach( cx24116_attach, &serit_sp2633_config, &dm1105dvb->i2c_adap); if (dm1105dvb->fe) dm1105dvb->fe->ops.set_voltage = dm1105dvb_set_voltage; -#else /* keep */ - dev_err(&dm1105dvb->pdev->dev, "needs cx24116 module\n"); -#endif /* keep */ break; } -- cgit v0.10.2 From 7396d3ea94b871de66940ea27d4bf81513404990 Mon Sep 17 00:00:00 2001 From: Darron Broad Date: Sun, 14 Sep 2008 10:45:58 -0300 Subject: V4L/DVB (9013): S2API: cx24116 Rolloff changes, sysctls cleanup, isl power changes. Remove the debugging sysctls. Rolloff was broken, not it works as expected and has been tested in kaffeine. Power related changes for the isl6421 are not implemented on the HVR4000/4000LITE. Signed-off-by: Steven Toth Signed-off-by: Darron Broad Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/dvb/frontends/cx24116.c b/drivers/media/dvb/frontends/cx24116.c index cfb265d..fdc741e 100644 --- a/drivers/media/dvb/frontends/cx24116.c +++ b/drivers/media/dvb/frontends/cx24116.c @@ -36,7 +36,6 @@ #include #include #include -#include #include "dvb_frontend.h" #include "cx24116.h" @@ -108,70 +107,6 @@ static int debug = 0; /* DiSEqC tone burst */ static int toneburst = 1; -/* debug & toneburst sysctl */ -static struct ctl_table_header *kernel_table_header; -static ctl_table toneburst_table[] = { -{ - .ctl_name = 0, - .procname = "toneburst", - .data = &toneburst, - .maxlen = sizeof(int), - .mode = 0666, - .child = NULL, - .parent = NULL, - .proc_handler = &proc_dointvec, - .strategy = NULL, - .extra1 = NULL, - .extra2 = NULL, -}, -{ - .ctl_name = 0, - .procname = "debug", - .data = &debug, - .maxlen = sizeof(int), - .mode = 0666, - .child = NULL, - .parent = NULL, - .proc_handler = &proc_dointvec, - .strategy = NULL, - .extra1 = NULL, - .extra2 = NULL, - }, - {0}, -}; -static ctl_table cx24116_table[] = { -{ - .ctl_name = 0, - .procname = "cx24116", - .data = NULL, - .maxlen = 0, - .mode = 0555, - .child = toneburst_table, - .parent = NULL, - .proc_handler = NULL, - .strategy = NULL, - .extra1 = NULL, - .extra2 = NULL, - }, - {0}, -}; -static ctl_table kernel_table[] = { -{ - .ctl_name = CTL_DEV, - .procname = "dev", - .data = NULL, - .maxlen = 0, - .mode = 0555, - .child = cx24116_table, - .parent = NULL, - .proc_handler = NULL, - .strategy = NULL, - .extra1 = NULL, - .extra2 = NULL, - }, - {0}, -}; - enum cmds { CMD_SET_VCO = 0x10, @@ -964,7 +899,7 @@ static int cx24116_send_diseqc_msg(struct dvb_frontend* fe, struct dvb_diseqc_ma * 2/C/A: E0 10 38 F8..FB * 3/D/B: E0 10 38 FC..FF * - * datebyte[3]= 8421:8421 + * databyte[3]= 8421:8421 * ABCD:WXYZ * CLR :SET * @@ -1061,7 +996,6 @@ static void cx24116_release(struct dvb_frontend* fe) struct cx24116_state* state = fe->demodulator_priv; dprintk("%s\n",__func__); kfree(state); - unregister_sysctl_table(kernel_table_header); } static struct dvb_frontend_ops cx24116_ops; @@ -1074,15 +1008,11 @@ struct dvb_frontend* cx24116_attach(const struct cx24116_config* config, dprintk("%s\n",__func__); - kernel_table_header = register_sysctl_table(kernel_table); - if(!kernel_table_header) - goto error1; - /* allocate memory for the internal state */ state = kmalloc(sizeof(struct cx24116_state), GFP_KERNEL); if (state == NULL) { printk("Unable to kmalloc\n"); - goto error2; + goto error1; } /* setup the state */ @@ -1095,7 +1025,7 @@ struct dvb_frontend* cx24116_attach(const struct cx24116_config* config, ret = (cx24116_readreg(state, 0xFF) << 8) | cx24116_readreg(state, 0xFE); if (ret != 0x0501) { printk("Invalid probe, probably not a CX24116 device\n"); - goto error3; + goto error2; } /* create dvb_frontend */ @@ -1103,8 +1033,7 @@ struct dvb_frontend* cx24116_attach(const struct cx24116_config* config, state->frontend.demodulator_priv = state; return &state->frontend; -error3: kfree(state); -error2: unregister_sysctl_table(kernel_table_header); +error2: kfree(state); error1: return NULL; } /* @@ -1195,7 +1124,8 @@ static int cx24116_set_frontend(struct dvb_frontend* fe, struct dvb_frontend_par case SYS_DVBS: dprintk("%s: DVB-S delivery system selected\n",__func__); state->dnxt.pilot = PILOT_OFF; - state->dnxt.rolloff = CX24116_ROLLOFF_035; + state->dnxt.rolloff_val = CX24116_ROLLOFF_035; + state->dnxt.rolloff = c->rolloff; break; case SYS_DVBS2: dprintk("%s: DVB-S2 delivery system selected\n",__func__); diff --git a/drivers/media/video/cx88/cx88-dvb.c b/drivers/media/video/cx88/cx88-dvb.c index 891acb5..ce1752d 100644 --- a/drivers/media/video/cx88/cx88-dvb.c +++ b/drivers/media/video/cx88/cx88-dvb.c @@ -946,7 +946,7 @@ static int dvb_register(struct cx8802_dev *dev) if (dev->dvb.frontend) { dvb_attach(isl6421_attach, dev->dvb.frontend, &dev->core->i2c_adap, - 0x08, 0x00, 0x00); + 0x08, ISL6421_DCL, 0x00); } break; case CX88_BOARD_TEVII_S460: -- cgit v0.10.2 From c063a48923525dcf20924eb8f1af3b22248f1e13 Mon Sep 17 00:00:00 2001 From: "Igor M. Liplianin" Date: Sun, 14 Sep 2008 07:43:53 -0300 Subject: V4L/DVB (9014): History update: MPEG initialization in cx24116. Adjust MPEG initialization in cx24116 in order to accomodate different MPEG CLK position and polarity in different cards. For example, HVR4000 uses 0x02 value, but DvbWorld & TeVii USB cards uses 0x01. Without it MPEG stream was broken on that cards for symbol rates > 30000 kSyms/s. Signed-off-by: Igor M. Liplianin Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/dvb/frontends/cx24116.c b/drivers/media/dvb/frontends/cx24116.c index fdc741e..4ad86d8 100644 --- a/drivers/media/dvb/frontends/cx24116.c +++ b/drivers/media/dvb/frontends/cx24116.c @@ -13,7 +13,8 @@ Some clean ups. Copyright (C) 2008 Igor Liplianin September, 9th 2008 - Fixed locking on high symbol rates (>30000). + Fixed locking on high symbol rates (>30000). + Implement MPEG initialization parameter. This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by -- cgit v0.10.2 From 681faa0b7a1d67576df07e0ad55ca42b2eab174a Mon Sep 17 00:00:00 2001 From: Darron Broad Date: Mon, 22 Sep 2008 00:47:20 -0300 Subject: V4L/DVB (9015): S2API: cx24116 register description fixes. From the author: Here is a simple patch detailing some reverse engineered register detail lost in my latest merge. The comments in the code refer to this register but it is never defined. This corrects this. Signed-off-by: Steven Toth Signed-off-by: Darron Broad Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/dvb/frontends/cx24116.c b/drivers/media/dvb/frontends/cx24116.c index 4ad86d8..02ed4ef 100644 --- a/drivers/media/dvb/frontends/cx24116.c +++ b/drivers/media/dvb/frontends/cx24116.c @@ -67,6 +67,13 @@ static int debug = 0; #define CX24116_REG_UCB8 (0xca) #define CX24116_REG_CLKDIV (0xf3) #define CX24116_REG_RATEDIV (0xf9) +#define CX24116_REG_FECSTATUS (0x9c) /* configured fec (not tuned) or actual FEC (tuned) 1=1/2 2=2/3 etc */ + +/* FECSTATUS bits */ +#define CX24116_FEC_FECMASK (0x1f) /* mask to determine configured fec (not tuned) or actual fec (tuned) */ +#define CX24116_FEC_DVBS (0x20) /* Select DVB-S demodulator, else DVB-S2 */ +#define CX24116_FEC_UNKNOWN (0x40) /* Unknown/unused */ +#define CX24116_FEC_PILOT (0x80) /* Pilot mode requested when tuning else always reset when tuned */ /* arg buffer size */ #define CX24116_ARGLEN (0x1e) -- cgit v0.10.2 From 34c080295af9b3ed9f704a881e07eb5ac128e1ed Mon Sep 17 00:00:00 2001 From: Darron Broad Date: Mon, 22 Sep 2008 00:54:59 -0300 Subject: V4L/DVB (9016): HVR3000/4000 Hauppauge related IR cleanups From the author: This patch-set fixes remote control issues I have experienced with hauppauge drivers in Linux since the PVR-350 and now with both a NOVA-S+ and HVR-4000. It has also been confirmed to work with an HVR-1300 user who had exactly the same issue. Hauppage remote controls use RC5. RC5 has a bit-field which represents the target device. The hauppauge windows drivers have a registry key which can enable filtering, but the linux drivers will accept any target device in this bit field for internal processing. This causes problems with setups such as mythtv where remote control key presses destined for the TV (target = 0) are interpreted by the kernel and subsequenctly LIRC then mythtv. Of the remote controls I have to hand (wintv black, pvr/hvr silver) the hauppauge remotes send one of two device targets ids, these are interpreted by the patch which then filters out any non hauppauge addresses. Signed-off-by: Steven Toth Signed-off-by: Darron Broad Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/cx88/cx88-input.c b/drivers/media/video/cx88/cx88-input.c index 097081e..13bc5d1 100644 --- a/drivers/media/video/cx88/cx88-input.c +++ b/drivers/media/video/cx88/cx88-input.c @@ -394,7 +394,7 @@ void cx88_ir_irq(struct cx88_core *core) { struct cx88_IR *ir = core->ir; u32 samples, ircode; - int i; + int i, start, range, toggle, dev, code; if (NULL == ir) return; @@ -463,11 +463,37 @@ void cx88_ir_irq(struct cx88_core *core) case CX88_BOARD_HAUPPAUGE_NOVASPLUS_S1: case CX88_BOARD_HAUPPAUGE_HVR1100: case CX88_BOARD_HAUPPAUGE_HVR3000: - case CX88_BOARD_PINNACLE_PCTV_HD_800i: case CX88_BOARD_HAUPPAUGE_HVR4000: case CX88_BOARD_HAUPPAUGE_HVR4000LITE: ircode = ir_decode_biphase(ir->samples, ir->scount, 5, 7); ir_dprintk("biphase decoded: %x\n", ircode); + /* + * RC5 has an extension bit which adds a new range + * of available codes, this is detected here. Also + * hauppauge remotes (black/silver) always use + * specific device ids. If we do not filter the + * device ids then messages destined for devices + * such as TVs (id=0) will get through to the + * device causing mis-fired events. + */ + /* split rc5 data block ... */ + start = (ircode & 0x2000) >> 13; + range = (ircode & 0x1000) >> 12; + toggle= (ircode & 0x0800) >> 11; + dev = (ircode & 0x07c0) >> 6; + code = (ircode & 0x003f) | ((range << 6) ^ 0x0040); + if( start != 1) + /* no key pressed */ + break; + if ( dev != 0x1e && dev != 0x1f ) + /* not a hauppauge remote */ + break; + ir_input_keydown(ir->input, &ir->ir, code, ircode); + ir->release = jiffies + msecs_to_jiffies(120); + break; + case CX88_BOARD_PINNACLE_PCTV_HD_800i: + ircode = ir_decode_biphase(ir->samples, ir->scount, 5, 7); + ir_dprintk("biphase decoded: %x\n", ircode); if ((ircode & 0xfffff000) != 0x3000) break; ir_input_keydown(ir->input, &ir->ir, ircode & 0x3f, ircode); diff --git a/drivers/media/video/ir-kbd-i2c.c b/drivers/media/video/ir-kbd-i2c.c index a30254b..703195a 100644 --- a/drivers/media/video/ir-kbd-i2c.c +++ b/drivers/media/video/ir-kbd-i2c.c @@ -65,7 +65,7 @@ static int get_key_haup_common(struct IR_i2c *ir, u32 *ir_key, u32 *ir_raw, int size, int offset) { unsigned char buf[6]; - int start, range, toggle, dev, code; + int start, range, toggle, dev, code, ircode; /* poll IR chip */ if (size != i2c_master_recv(&ir->c,buf,size)) @@ -85,6 +85,24 @@ static int get_key_haup_common(struct IR_i2c *ir, u32 *ir_key, u32 *ir_raw, if (!start) /* no key pressed */ return 0; + /* + * Hauppauge remotes (black/silver) always use + * specific device ids. If we do not filter the + * device ids then messages destined for devices + * such as TVs (id=0) will get through causing + * mis-fired events. + * + * We also filter out invalid key presses which + * produce annoying debug log entries. + */ + ircode= (start << 12) | (toggle << 11) | (dev << 6) | code; + if ((ircode & 0x1fff)==0x1fff) + /* invalid key press */ + return 0; + + if (dev!=0x1e && dev!=0x1f) + /* not a hauppauge remote */ + return 0; if (!range) code += 64; @@ -94,7 +112,7 @@ static int get_key_haup_common(struct IR_i2c *ir, u32 *ir_key, u32 *ir_raw, /* return key */ *ir_key = code; - *ir_raw = (start << 12) | (toggle << 11) | (dev << 6) | code; + *ir_raw = ircode; return 1; } -- cgit v0.10.2 From 04ad28c9916da709f38b1d43817892142c2c3508 Mon Sep 17 00:00:00 2001 From: "Igor M. Liplianin" Date: Tue, 16 Sep 2008 18:21:11 -0300 Subject: V4L/DVB (9017): Add support for Silicon Laboratories SI2109/2110 demodulators. Add support for Silicon Laboratories SI2109/2110 demodulator and cards with it, such as DvbWorld PCI2002. Signed-off-by: Igor M. Liplianin Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/dvb/dm1105/Kconfig b/drivers/media/dvb/dm1105/Kconfig index 4b96bbb..2af5fff 100644 --- a/drivers/media/dvb/dm1105/Kconfig +++ b/drivers/media/dvb/dm1105/Kconfig @@ -4,6 +4,7 @@ config DVB_DM1105 select DVB_PLL if !DVB_FE_CUSTOMISE select DVB_STV0299 if !DVB_FE_CUSTOMISE select DVB_CX24116 if !DVB_FE_CUSTOMISE + select DVB_SI21XX if !DVB_FE_CUSTOMISE help Support for cards based on the SDMC DM1105 PCI chip like DvbWorld 2002 diff --git a/drivers/media/dvb/dm1105/dm1105.c b/drivers/media/dvb/dm1105/dm1105.c index 204763d..0c1790f 100644 --- a/drivers/media/dvb/dm1105/dm1105.c +++ b/drivers/media/dvb/dm1105/dm1105.c @@ -40,8 +40,8 @@ #include "stv0299.h" /*#include "stv0288.h" - *#include "si21xx.h" *#include "stb6000.h"*/ +#include "si21xx.h" #include "cx24116.h" #include "z0194a.h" @@ -600,12 +600,12 @@ static struct stv0288_config earda_config = { .min_delay_ms = 100, }; +#endif /* keep */ static struct si21xx_config serit_config = { .demod_address = 0x68, .min_delay_ms = 100, }; -#endif /* keep */ static struct cx24116_config serit_sp2633_config = { .demod_address = 0x55, @@ -639,7 +639,7 @@ static int __devinit frontend_init(struct dm1105dvb *dm1105dvb) &dm1105dvb->i2c_adap); } } - +#endif /* keep */ if (!dm1105dvb->fe) { dm1105dvb->fe = dvb_attach( si21xx_attach, &serit_config, @@ -648,7 +648,6 @@ static int __devinit frontend_init(struct dm1105dvb *dm1105dvb) dm1105dvb->fe->ops.set_voltage = dm1105dvb_set_voltage; } -#endif /* keep */ break; case PCI_DEVICE_ID_DW2004: dm1105dvb->fe = dvb_attach( diff --git a/drivers/media/dvb/frontends/Kconfig b/drivers/media/dvb/frontends/Kconfig index d2f31da..7697391 100644 --- a/drivers/media/dvb/frontends/Kconfig +++ b/drivers/media/dvb/frontends/Kconfig @@ -99,6 +99,13 @@ config DVB_CX24116 help A DVB-S/S2 tuner module. Say Y when you want to support this frontend. +config DVB_SI21XX + tristate "Silicon Labs SI21XX based" + depends on DVB_CORE && I2C + default m if DVB_FE_CUSTOMISE + help + A DVB-S tuner module. Say Y when you want to support this frontend. + comment "DVB-T (terrestrial) frontends" depends on DVB_CORE diff --git a/drivers/media/dvb/frontends/Makefile b/drivers/media/dvb/frontends/Makefile index 5deb8a5..c719b7f 100644 --- a/drivers/media/dvb/frontends/Makefile +++ b/drivers/media/dvb/frontends/Makefile @@ -52,3 +52,4 @@ obj-$(CONFIG_DVB_LGS8GL5) += lgs8gl5.o obj-$(CONFIG_DVB_DUMMY_FE) += dvb_dummy_fe.o obj-$(CONFIG_DVB_AF9013) += af9013.o obj-$(CONFIG_DVB_CX24116) += cx24116.o +obj-$(CONFIG_DVB_SI21XX) += si21xx.o diff --git a/drivers/media/dvb/frontends/si21xx.c b/drivers/media/dvb/frontends/si21xx.c new file mode 100644 index 0000000..3ddbe69 --- /dev/null +++ b/drivers/media/dvb/frontends/si21xx.c @@ -0,0 +1,974 @@ +/* DVB compliant Linux driver for the DVB-S si2109/2110 demodulator +* +* Copyright (C) 2008 Igor M. Liplianin (liplianin@me.by) +* +* This program is free software; you can redistribute it and/or modify +* it under the terms of the GNU General Public License as published by +* the Free Software Foundation; either version 2 of the License, or +* (at your option) any later version. +* +*/ +#include +#include +#include +#include +#include +#include +#include +#include + +#include "dvb_frontend.h" +#include "si21xx.h" + +#define REVISION_REG 0x00 +#define SYSTEM_MODE_REG 0x01 +#define TS_CTRL_REG_1 0x02 +#define TS_CTRL_REG_2 0x03 +#define PIN_CTRL_REG_1 0x04 +#define PIN_CTRL_REG_2 0x05 +#define LOCK_STATUS_REG_1 0x0f +#define LOCK_STATUS_REG_2 0x10 +#define ACQ_STATUS_REG 0x11 +#define ACQ_CTRL_REG_1 0x13 +#define ACQ_CTRL_REG_2 0x14 +#define PLL_DIVISOR_REG 0x15 +#define COARSE_TUNE_REG 0x16 +#define FINE_TUNE_REG_L 0x17 +#define FINE_TUNE_REG_H 0x18 + +#define ANALOG_AGC_POWER_LEVEL_REG 0x28 +#define CFO_ESTIMATOR_CTRL_REG_1 0x29 +#define CFO_ESTIMATOR_CTRL_REG_2 0x2a +#define CFO_ESTIMATOR_CTRL_REG_3 0x2b + +#define SYM_RATE_ESTIMATE_REG_L 0x31 +#define SYM_RATE_ESTIMATE_REG_M 0x32 +#define SYM_RATE_ESTIMATE_REG_H 0x33 + +#define CFO_ESTIMATOR_OFFSET_REG_L 0x36 +#define CFO_ESTIMATOR_OFFSET_REG_H 0x37 +#define CFO_ERROR_REG_L 0x38 +#define CFO_ERROR_REG_H 0x39 +#define SYM_RATE_ESTIMATOR_CTRL_REG 0x3a + +#define SYM_RATE_REG_L 0x3f +#define SYM_RATE_REG_M 0x40 +#define SYM_RATE_REG_H 0x41 +#define SYM_RATE_ESTIMATOR_MAXIMUM_REG 0x42 +#define SYM_RATE_ESTIMATOR_MINIMUM_REG 0x43 + +#define C_N_ESTIMATOR_CTRL_REG 0x7c +#define C_N_ESTIMATOR_THRSHLD_REG 0x7d +#define C_N_ESTIMATOR_LEVEL_REG_L 0x7e +#define C_N_ESTIMATOR_LEVEL_REG_H 0x7f + +#define BLIND_SCAN_CTRL_REG 0x80 + +#define LSA_CTRL_REG_1 0x8D +#define SPCTRM_TILT_CORR_THRSHLD_REG 0x8f +#define ONE_DB_BNDWDTH_THRSHLD_REG 0x90 +#define TWO_DB_BNDWDTH_THRSHLD_REG 0x91 +#define THREE_DB_BNDWDTH_THRSHLD_REG 0x92 +#define INBAND_POWER_THRSHLD_REG 0x93 +#define REF_NOISE_LVL_MRGN_THRSHLD_REG 0x94 + +#define VIT_SRCH_CTRL_REG_1 0xa0 +#define VIT_SRCH_CTRL_REG_2 0xa1 +#define VIT_SRCH_CTRL_REG_3 0xa2 +#define VIT_SRCH_STATUS_REG 0xa3 +#define VITERBI_BER_COUNT_REG_L 0xab +#define REED_SOLOMON_CTRL_REG 0xb0 +#define REED_SOLOMON_ERROR_COUNT_REG_L 0xb1 +#define PRBS_CTRL_REG 0xb5 + +#define LNB_CTRL_REG_1 0xc0 +#define LNB_CTRL_REG_2 0xc1 +#define LNB_CTRL_REG_3 0xc2 +#define LNB_CTRL_REG_4 0xc3 +#define LNB_CTRL_STATUS_REG 0xc4 +#define LNB_FIFO_REGS_0 0xc5 +#define LNB_FIFO_REGS_1 0xc6 +#define LNB_FIFO_REGS_2 0xc7 +#define LNB_FIFO_REGS_3 0xc8 +#define LNB_FIFO_REGS_4 0xc9 +#define LNB_FIFO_REGS_5 0xca +#define LNB_SUPPLY_CTRL_REG_1 0xcb +#define LNB_SUPPLY_CTRL_REG_2 0xcc +#define LNB_SUPPLY_CTRL_REG_3 0xcd +#define LNB_SUPPLY_CTRL_REG_4 0xce +#define LNB_SUPPLY_STATUS_REG 0xcf + +#define FALSE 0 +#define TRUE 1 +#define FAIL -1 +#define PASS 0 + +#define ALLOWABLE_FS_COUNT 10 +#define STATUS_BER 0 +#define STATUS_UCBLOCKS 1 + +static int debug; +#define dprintk(args...) \ + do { \ + if (debug) \ + printk(KERN_DEBUG "si21xx: " args); \ + } while (0) + +enum { + ACTIVE_HIGH, + ACTIVE_LOW +}; +enum { + BYTE_WIDE, + BIT_WIDE +}; +enum { + CLK_GAPPED_MODE, + CLK_CONTINUOUS_MODE +}; +enum { + RISING_EDGE, + FALLING_EDGE +}; +enum { + MSB_FIRST, + LSB_FIRST +}; +enum { + SERIAL, + PARALLEL +}; + +struct si21xx_state { + struct i2c_adapter *i2c; + const struct si21xx_config *config; + struct dvb_frontend frontend; + u8 initialised:1; + int errmode; + int fs; /*Sampling rate of the ADC in MHz*/ +}; + +/* register default initialization */ +static u8 serit_sp1511lhb_inittab[] = { + 0x01, 0x28, /* set i2c_inc_disable */ + 0x20, 0x03, + 0x27, 0x20, + 0xe0, 0x45, + 0xe1, 0x08, + 0xfe, 0x01, + 0x01, 0x28, + 0x89, 0x09, + 0x04, 0x80, + 0x05, 0x01, + 0x06, 0x00, + 0x20, 0x03, + 0x24, 0x88, + 0x29, 0x09, + 0x2a, 0x0f, + 0x2c, 0x10, + 0x2d, 0x19, + 0x2e, 0x08, + 0x2f, 0x10, + 0x30, 0x19, + 0x34, 0x20, + 0x35, 0x03, + 0x45, 0x02, + 0x46, 0x45, + 0x47, 0xd0, + 0x48, 0x00, + 0x49, 0x40, + 0x4a, 0x03, + 0x4c, 0xfd, + 0x4f, 0x2e, + 0x50, 0x2e, + 0x51, 0x10, + 0x52, 0x10, + 0x56, 0x92, + 0x59, 0x00, + 0x5a, 0x2d, + 0x5b, 0x33, + 0x5c, 0x1f, + 0x5f, 0x76, + 0x62, 0xc0, + 0x63, 0xc0, + 0x64, 0xf3, + 0x65, 0xf3, + 0x79, 0x40, + 0x6a, 0x40, + 0x6b, 0x0a, + 0x6c, 0x80, + 0x6d, 0x27, + 0x71, 0x06, + 0x75, 0x60, + 0x78, 0x00, + 0x79, 0xb5, + 0x7c, 0x05, + 0x7d, 0x1a, + 0x87, 0x55, + 0x88, 0x72, + 0x8f, 0x08, + 0x90, 0xe0, + 0x94, 0x40, + 0xa0, 0x3f, + 0xa1, 0xc0, + 0xa4, 0xcc, + 0xa5, 0x66, + 0xa6, 0x66, + 0xa7, 0x7b, + 0xa8, 0x7b, + 0xa9, 0x7b, + 0xaa, 0x9a, + 0xed, 0x04, + 0xad, 0x00, + 0xae, 0x03, + 0xcc, 0xab, + 0x01, 0x08, + 0xff, 0xff +}; + +/* low level read/writes */ +static int si21_writeregs(struct si21xx_state *state, u8 reg1, + u8 *data, int len) +{ + int ret; + u8 buf[60];/* = { reg1, data };*/ + struct i2c_msg msg = { + .addr = state->config->demod_address, + .flags = 0, + .buf = buf, + .len = len + 1 + }; + + msg.buf[0] = reg1; + memcpy(msg.buf + 1, data, len); + + ret = i2c_transfer(state->i2c, &msg, 1); + + if (ret != 1) + dprintk("%s: writereg error (reg1 == 0x%02x, data == 0x%02x, " + "ret == %i)\n", __func__, reg1, data[0], ret); + + return (ret != 1) ? -EREMOTEIO : 0; +} + +static int si21_writereg(struct si21xx_state *state, u8 reg, u8 data) +{ + int ret; + u8 buf[] = { reg, data }; + struct i2c_msg msg = { + .addr = state->config->demod_address, + .flags = 0, + .buf = buf, + .len = 2 + }; + + ret = i2c_transfer(state->i2c, &msg, 1); + + if (ret != 1) + dprintk("%s: writereg error (reg == 0x%02x, data == 0x%02x, " + "ret == %i)\n", __func__, reg, data, ret); + + return (ret != 1) ? -EREMOTEIO : 0; +} + +static int si21_write(struct dvb_frontend *fe, u8 *buf, int len) +{ + struct si21xx_state *state = fe->demodulator_priv; + + if (len != 2) + return -EINVAL; + + return si21_writereg(state, buf[0], buf[1]); +} + +static u8 si21_readreg(struct si21xx_state *state, u8 reg) +{ + int ret; + u8 b0[] = { reg }; + u8 b1[] = { 0 }; + struct i2c_msg msg[] = { + { + .addr = state->config->demod_address, + .flags = 0, + .buf = b0, + .len = 1 + }, { + .addr = state->config->demod_address, + .flags = I2C_M_RD, + .buf = b1, + .len = 1 + } + }; + + ret = i2c_transfer(state->i2c, msg, 2); + + if (ret != 2) + dprintk("%s: readreg error (reg == 0x%02x, ret == %i)\n", + __func__, reg, ret); + + return b1[0]; +} + +static int si21_readregs(struct si21xx_state *state, u8 reg1, u8 *b, u8 len) +{ + int ret; + struct i2c_msg msg[] = { + { + .addr = state->config->demod_address, + .flags = 0, + .buf = ®1, + .len = 1 + }, { + .addr = state->config->demod_address, + .flags = I2C_M_RD, + .buf = b, + .len = len + } + }; + + ret = i2c_transfer(state->i2c, msg, 2); + + if (ret != 2) + dprintk("%s: readreg error (ret == %i)\n", __func__, ret); + + return ret == 2 ? 0 : -1; +} + +static int si21xx_wait_diseqc_idle(struct si21xx_state *state, int timeout) +{ + unsigned long start = jiffies; + + dprintk("%s\n", __func__); + + while ((si21_readreg(state, LNB_CTRL_REG_1) & 0x8) == 8) { + if (jiffies - start > timeout) { + dprintk("%s: timeout!!\n", __func__); + return -ETIMEDOUT; + } + msleep(10); + }; + + return 0; +} + +static int si21xx_set_symbolrate(struct dvb_frontend *fe, u32 srate) +{ + struct si21xx_state *state = fe->demodulator_priv; + u32 sym_rate, data_rate; + int i; + u8 sym_rate_bytes[3]; + + dprintk("%s : srate = %i\n", __func__ , srate); + + if ((srate < 1000000) || (srate > 45000000)) + return -EINVAL; + + data_rate = srate; + sym_rate = 0; + + for (i = 0; i < 4; ++i) { + sym_rate /= 100; + sym_rate = sym_rate + ((data_rate % 100) * 0x800000) / + state->fs; + data_rate /= 100; + } + for (i = 0; i < 3; ++i) + sym_rate_bytes[i] = (u8)((sym_rate >> (i * 8)) & 0xff); + + si21_writeregs(state, SYM_RATE_REG_L, sym_rate_bytes, 0x03); + + return 0; +} + +static int si21xx_send_diseqc_msg(struct dvb_frontend *fe, + struct dvb_diseqc_master_cmd *m) +{ + struct si21xx_state *state = fe->demodulator_priv; + u8 lnb_status; + u8 LNB_CTRL_1; + int status; + + dprintk("%s\n", __func__); + + status = PASS; + LNB_CTRL_1 = 0; + + status |= si21_readregs(state, LNB_CTRL_STATUS_REG, &lnb_status, 0x01); + status |= si21_readregs(state, LNB_CTRL_REG_1, &lnb_status, 0x01); + + /*fill the FIFO*/ + status |= si21_writeregs(state, LNB_FIFO_REGS_0, m->msg, m->msg_len); + + LNB_CTRL_1 = (lnb_status & 0x70); + LNB_CTRL_1 |= m->msg_len; + + LNB_CTRL_1 |= 0x80; /* begin LNB signaling */ + + status |= si21_writeregs(state, LNB_CTRL_REG_1, &LNB_CTRL_1, 0x01); + + return status; +} + +static int si21xx_send_diseqc_burst(struct dvb_frontend *fe, + fe_sec_mini_cmd_t burst) +{ + struct si21xx_state *state = fe->demodulator_priv; + u8 val; + + dprintk("%s\n", __func__); + + if (si21xx_wait_diseqc_idle(state, 100) < 0) + return -ETIMEDOUT; + + val = (0x80 | si21_readreg(state, 0xc1)); + if (si21_writereg(state, LNB_CTRL_REG_1, + burst == SEC_MINI_A ? (val & ~0x10) : (val | 0x10))) + return -EREMOTEIO; + + if (si21xx_wait_diseqc_idle(state, 100) < 0) + return -ETIMEDOUT; + + if (si21_writereg(state, LNB_CTRL_REG_1, val)) + return -EREMOTEIO; + + return 0; +} +/* 30.06.2008 */ +static int si21xx_set_tone(struct dvb_frontend *fe, fe_sec_tone_mode_t tone) +{ + struct si21xx_state *state = fe->demodulator_priv; + u8 val; + + dprintk("%s\n", __func__); + val = (0x80 | si21_readreg(state, LNB_CTRL_REG_1)); + + switch (tone) { + case SEC_TONE_ON: + return si21_writereg(state, LNB_CTRL_REG_1, val | 0x20); + + case SEC_TONE_OFF: + return si21_writereg(state, LNB_CTRL_REG_1, (val & ~0x20)); + + default: + return -EINVAL; + } +} + +static int si21xx_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t volt) +{ + struct si21xx_state *state = fe->demodulator_priv; + + u8 val; + dprintk("%s: %s\n", __func__, + volt == SEC_VOLTAGE_13 ? "SEC_VOLTAGE_13" : + volt == SEC_VOLTAGE_18 ? "SEC_VOLTAGE_18" : "??"); + + + val = (0x80 | si21_readreg(state, LNB_CTRL_REG_1)); + + switch (volt) { + case SEC_VOLTAGE_18: + return si21_writereg(state, LNB_CTRL_REG_1, val | 0x40); + break; + case SEC_VOLTAGE_13: + return si21_writereg(state, LNB_CTRL_REG_1, (val & ~0x40)); + break; + default: + return -EINVAL; + }; +} + +static int si21xx_init(struct dvb_frontend *fe) +{ + struct si21xx_state *state = fe->demodulator_priv; + int i; + int status = 0; + u8 reg1; + u8 val; + u8 reg2[2]; + + dprintk("%s\n", __func__); + + for (i = 0; ; i += 2) { + reg1 = serit_sp1511lhb_inittab[i]; + val = serit_sp1511lhb_inittab[i+1]; + if (reg1 == 0xff && val == 0xff) + break; + si21_writeregs(state, reg1, &val, 1); + } + + /*DVB QPSK SYSTEM MODE REG*/ + reg1 = 0x08; + si21_writeregs(state, SYSTEM_MODE_REG, ®1, 0x01); + + /*transport stream config*/ + /* + mode = PARALLEL; + sdata_form = LSB_FIRST; + clk_edge = FALLING_EDGE; + clk_mode = CLK_GAPPED_MODE; + strt_len = BYTE_WIDE; + sync_pol = ACTIVE_HIGH; + val_pol = ACTIVE_HIGH; + err_pol = ACTIVE_HIGH; + sclk_rate = 0x00; + parity = 0x00 ; + data_delay = 0x00; + clk_delay = 0x00; + pclk_smooth = 0x00; + */ + reg2[0] = + PARALLEL + (LSB_FIRST << 1) + + (FALLING_EDGE << 2) + (CLK_GAPPED_MODE << 3) + + (BYTE_WIDE << 4) + (ACTIVE_HIGH << 5) + + (ACTIVE_HIGH << 6) + (ACTIVE_HIGH << 7); + + reg2[1] = 0; + /* sclk_rate + (parity << 2) + + (data_delay << 3) + (clk_delay << 4) + + (pclk_smooth << 5); + */ + status |= si21_writeregs(state, TS_CTRL_REG_1, reg2, 0x02); + if (status != 0) + dprintk(" %s : TS Set Error\n", __func__); + + return 0; + +} + +static int si21_read_status(struct dvb_frontend *fe, fe_status_t *status) +{ + struct si21xx_state *state = fe->demodulator_priv; + u8 regs_read[2]; + u8 reg_read; + u8 i; + u8 lock; + u8 signal = si21_readreg(state, ANALOG_AGC_POWER_LEVEL_REG); + + si21_readregs(state, LOCK_STATUS_REG_1, regs_read, 0x02); + reg_read = 0; + + for (i = 0; i < 7; ++i) + reg_read |= ((regs_read[0] >> i) & 0x01) << (6 - i); + + lock = ((reg_read & 0x7f) | (regs_read[1] & 0x80)); + + dprintk("%s : FE_READ_STATUS : VSTATUS: 0x%02x\n", __func__, lock); + *status = 0; + + if (signal > 10) + *status |= FE_HAS_SIGNAL; + + if (lock & 0x2) + *status |= FE_HAS_CARRIER; + + if (lock & 0x20) + *status |= FE_HAS_VITERBI; + + if (lock & 0x40) + *status |= FE_HAS_SYNC; + + if ((lock & 0x7b) == 0x7b) + *status |= FE_HAS_LOCK; + + return 0; +} + +static int si21_read_signal_strength(struct dvb_frontend *fe, u16 *strength) +{ + struct si21xx_state *state = fe->demodulator_priv; + + /*status = si21_readreg(state, ANALOG_AGC_POWER_LEVEL_REG, + (u8*)agclevel, 0x01);*/ + + u16 signal = (3 * si21_readreg(state, 0x27) * + si21_readreg(state, 0x28)); + + dprintk("%s : AGCPWR: 0x%02x%02x, signal=0x%04x\n", __func__, + si21_readreg(state, 0x27), + si21_readreg(state, 0x28), (int) signal); + + signal <<= 4; + *strength = signal; + + return 0; +} + +static int si21_read_ber(struct dvb_frontend *fe, u32 *ber) +{ + struct si21xx_state *state = fe->demodulator_priv; + + dprintk("%s\n", __func__); + + if (state->errmode != STATUS_BER) + return 0; + + *ber = (si21_readreg(state, 0x1d) << 8) | + si21_readreg(state, 0x1e); + + return 0; +} + +static int si21_read_snr(struct dvb_frontend *fe, u16 *snr) +{ + struct si21xx_state *state = fe->demodulator_priv; + + s32 xsnr = 0xffff - ((si21_readreg(state, 0x24) << 8) | + si21_readreg(state, 0x25)); + xsnr = 3 * (xsnr - 0xa100); + *snr = (xsnr > 0xffff) ? 0xffff : (xsnr < 0) ? 0 : xsnr; + + dprintk("%s\n", __func__); + + return 0; +} + +static int si21_read_ucblocks(struct dvb_frontend *fe, u32 *ucblocks) +{ + struct si21xx_state *state = fe->demodulator_priv; + + dprintk("%s\n", __func__); + + if (state->errmode != STATUS_UCBLOCKS) + *ucblocks = 0; + else + *ucblocks = (si21_readreg(state, 0x1d) << 8) | + si21_readreg(state, 0x1e); + + return 0; +} + +/* initiates a channel acquisition sequence + using the specified symbol rate and code rate */ +static int si21xx_setacquire(struct dvb_frontend *fe, int symbrate, + fe_code_rate_t crate) +{ + + struct si21xx_state *state = fe->demodulator_priv; + u8 coderates[] = { + 0x0, 0x01, 0x02, 0x04, 0x00, + 0x8, 0x10, 0x20, 0x00, 0x3f + }; + + u8 coderate_ptr; + int status; + u8 start_acq = 0x80; + u8 reg, regs[3]; + + dprintk("%s\n", __func__); + + status = PASS; + coderate_ptr = coderates[crate]; + + si21xx_set_symbolrate(fe, symbrate); + + /* write code rates to use in the Viterbi search */ + status |= si21_writeregs(state, + VIT_SRCH_CTRL_REG_1, + &coderate_ptr, 0x01); + + /* clear acq_start bit */ + status |= si21_readregs(state, ACQ_CTRL_REG_2, ®, 0x01); + reg &= ~start_acq; + status |= si21_writeregs(state, ACQ_CTRL_REG_2, ®, 0x01); + + /* use new Carrier Frequency Offset Estimator (QuickLock) */ + regs[0] = 0xCB; + regs[1] = 0x40; + regs[2] = 0xCB; + + status |= si21_writeregs(state, + TWO_DB_BNDWDTH_THRSHLD_REG, + ®s[0], 0x03); + reg = 0x56; + status |= si21_writeregs(state, + LSA_CTRL_REG_1, ®, 1); + reg = 0x05; + status |= si21_writeregs(state, + BLIND_SCAN_CTRL_REG, ®, 1); + /* start automatic acq */ + status |= si21_writeregs(state, + ACQ_CTRL_REG_2, &start_acq, 0x01); + + return status; +} + +static int si21xx_set_property(struct dvb_frontend *fe, struct dtv_property *p) +{ + dprintk("%s(..)\n", __func__); + return 0; +} + +static int si21xx_get_property(struct dvb_frontend *fe, struct dtv_property *p) +{ + dprintk("%s(..)\n", __func__); + return 0; +} + +static int si21xx_set_frontend(struct dvb_frontend *fe, + struct dvb_frontend_parameters *dfp) +{ + struct si21xx_state *state = fe->demodulator_priv; + struct dtv_frontend_properties *c = &fe->dtv_property_cache; + + /* freq Channel carrier frequency in KHz (i.e. 1550000 KHz) + datarate Channel symbol rate in Sps (i.e. 22500000 Sps)*/ + + /* in MHz */ + unsigned char coarse_tune_freq; + int fine_tune_freq; + unsigned char sample_rate = 0; + /* boolean */ + unsigned int inband_interferer_ind; + + /* INTERMEDIATE VALUES */ + int icoarse_tune_freq; /* MHz */ + int ifine_tune_freq; /* MHz */ + unsigned int band_high; + unsigned int band_low; + unsigned int x1; + unsigned int x2; + int i; + unsigned int inband_interferer_div2[ALLOWABLE_FS_COUNT] = { + FALSE, FALSE, FALSE, FALSE, FALSE, + FALSE, FALSE, FALSE, FALSE, FALSE + }; + unsigned int inband_interferer_div4[ALLOWABLE_FS_COUNT] = { + FALSE, FALSE, FALSE, FALSE, FALSE, + FALSE, FALSE, FALSE, FALSE, FALSE + }; + + int status; + + /* allowable sample rates for ADC in MHz */ + int afs[ALLOWABLE_FS_COUNT] = { 200, 192, 193, 194, 195, + 196, 204, 205, 206, 207 + }; + /* in MHz */ + int if_limit_high; + int if_limit_low; + int lnb_lo; + int lnb_uncertanity; + + int rf_freq; + int data_rate; + unsigned char regs[4]; + + dprintk("%s : FE_SET_FRONTEND\n", __func__); + + if (c->delivery_system != SYS_DVBS) { + dprintk("%s: unsupported delivery system selected (%d)\n", + __func__, c->delivery_system); + return -EOPNOTSUPP; + } + + for (i = 0; i < ALLOWABLE_FS_COUNT; ++i) + inband_interferer_div2[i] = inband_interferer_div4[i] = FALSE; + + if_limit_high = -700000; + if_limit_low = -100000; + /* in MHz */ + lnb_lo = 0; + lnb_uncertanity = 0; + + rf_freq = 10 * c->frequency ; + data_rate = c->symbol_rate / 100; + + status = PASS; + + band_low = (rf_freq - lnb_lo) - ((lnb_uncertanity * 200) + + (data_rate * 135)) / 200; + + band_high = (rf_freq - lnb_lo) + ((lnb_uncertanity * 200) + + (data_rate * 135)) / 200; + + + icoarse_tune_freq = 100000 * + (((rf_freq - lnb_lo) - + (if_limit_low + if_limit_high) / 2) + / 100000); + + ifine_tune_freq = (rf_freq - lnb_lo) - icoarse_tune_freq ; + + for (i = 0; i < ALLOWABLE_FS_COUNT; ++i) { + x1 = ((rf_freq - lnb_lo) / (afs[i] * 2500)) * + (afs[i] * 2500) + afs[i] * 2500; + + x2 = ((rf_freq - lnb_lo) / (afs[i] * 2500)) * + (afs[i] * 2500); + + if (((band_low < x1) && (x1 < band_high)) || + ((band_low < x2) && (x2 < band_high))) + inband_interferer_div4[i] = TRUE; + + } + + for (i = 0; i < ALLOWABLE_FS_COUNT; ++i) { + x1 = ((rf_freq - lnb_lo) / (afs[i] * 5000)) * + (afs[i] * 5000) + afs[i] * 5000; + + x2 = ((rf_freq - lnb_lo) / (afs[i] * 5000)) * + (afs[i] * 5000); + + if (((band_low < x1) && (x1 < band_high)) || + ((band_low < x2) && (x2 < band_high))) + inband_interferer_div2[i] = TRUE; + } + + inband_interferer_ind = TRUE; + for (i = 0; i < ALLOWABLE_FS_COUNT; ++i) + inband_interferer_ind &= inband_interferer_div2[i] | + inband_interferer_div4[i]; + + if (inband_interferer_ind) { + for (i = 0; i < ALLOWABLE_FS_COUNT; ++i) { + if (inband_interferer_div2[i] == FALSE) { + sample_rate = (u8) afs[i]; + break; + } + } + } else { + for (i = 0; i < ALLOWABLE_FS_COUNT; ++i) { + if ((inband_interferer_div2[i] | + inband_interferer_div4[i]) == FALSE) { + sample_rate = (u8) afs[i]; + break; + } + } + + } + + if (sample_rate > 207 || sample_rate < 192) + sample_rate = 200; + + fine_tune_freq = ((0x4000 * (ifine_tune_freq / 10)) / + ((sample_rate) * 1000)); + + coarse_tune_freq = (u8)(icoarse_tune_freq / 100000); + + regs[0] = sample_rate; + regs[1] = coarse_tune_freq; + regs[2] = fine_tune_freq & 0xFF; + regs[3] = fine_tune_freq >> 8 & 0xFF; + + status |= si21_writeregs(state, PLL_DIVISOR_REG, ®s[0], 0x04); + + state->fs = sample_rate;/*ADC MHz*/ + si21xx_setacquire(fe, c->symbol_rate, c->fec_inner); + + return 0; +} + +static int si21xx_sleep(struct dvb_frontend *fe) +{ + struct si21xx_state *state = fe->demodulator_priv; + u8 regdata; + + dprintk("%s\n", __func__); + + si21_readregs(state, SYSTEM_MODE_REG, ®data, 0x01); + regdata |= 1 << 6; + si21_writeregs(state, SYSTEM_MODE_REG, ®data, 0x01); + state->initialised = 0; + + return 0; +} + +static void si21xx_release(struct dvb_frontend *fe) +{ + struct si21xx_state *state = fe->demodulator_priv; + + dprintk("%s\n", __func__); + + kfree(state); +} + +static struct dvb_frontend_ops si21xx_ops = { + + .info = { + .name = "SL SI21XX DVB-S", + .type = FE_QPSK, + .frequency_min = 950000, + .frequency_max = 2150000, + .frequency_stepsize = 125, /* kHz for QPSK frontends */ + .frequency_tolerance = 0, + .symbol_rate_min = 1000000, + .symbol_rate_max = 45000000, + .symbol_rate_tolerance = 500, /* ppm */ + .caps = FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 | + FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 | + FE_CAN_QPSK | + FE_CAN_FEC_AUTO + }, + + .release = si21xx_release, + .init = si21xx_init, + .sleep = si21xx_sleep, + .write = si21_write, + .read_status = si21_read_status, + .read_ber = si21_read_ber, + .read_signal_strength = si21_read_signal_strength, + .read_snr = si21_read_snr, + .read_ucblocks = si21_read_ucblocks, + .diseqc_send_master_cmd = si21xx_send_diseqc_msg, + .diseqc_send_burst = si21xx_send_diseqc_burst, + .set_tone = si21xx_set_tone, + .set_voltage = si21xx_set_voltage, + + .set_property = si21xx_set_property, + .get_property = si21xx_get_property, + .set_frontend = si21xx_set_frontend, +}; + +struct dvb_frontend *si21xx_attach(const struct si21xx_config *config, + struct i2c_adapter *i2c) +{ + struct si21xx_state *state = NULL; + int id; + + dprintk("%s\n", __func__); + + /* allocate memory for the internal state */ + state = kmalloc(sizeof(struct si21xx_state), GFP_KERNEL); + if (state == NULL) + goto error; + + /* setup the state */ + state->config = config; + state->i2c = i2c; + state->initialised = 0; + state->errmode = STATUS_BER; + + /* check if the demod is there */ + id = si21_readreg(state, SYSTEM_MODE_REG); + si21_writereg(state, SYSTEM_MODE_REG, id | 0x40); /* standby off */ + msleep(200); + id = si21_readreg(state, 0x00); + + /* register 0x00 contains: + 0x34 for SI2107 + 0x24 for SI2108 + 0x14 for SI2109 + 0x04 for SI2110 + */ + if (id != 0x04 && id != 0x14) + goto error; + + /* create dvb_frontend */ + memcpy(&state->frontend.ops, &si21xx_ops, + sizeof(struct dvb_frontend_ops)); + state->frontend.demodulator_priv = state; + return &state->frontend; + +error: + kfree(state); + return NULL; +} +EXPORT_SYMBOL(si21xx_attach); + +module_param(debug, int, 0644); +MODULE_PARM_DESC(debug, "Turn on/off frontend debugging (default:off)."); + +MODULE_DESCRIPTION("SL SI21XX DVB Demodulator driver"); +MODULE_AUTHOR("Igor M. Liplianin"); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/dvb/frontends/si21xx.h b/drivers/media/dvb/frontends/si21xx.h new file mode 100644 index 0000000..141b5b8 --- /dev/null +++ b/drivers/media/dvb/frontends/si21xx.h @@ -0,0 +1,37 @@ +#ifndef SI21XX_H +#define SI21XX_H + +#include +#include "dvb_frontend.h" + +struct si21xx_config { + /* the demodulator's i2c address */ + u8 demod_address; + + /* minimum delay before retuning */ + int min_delay_ms; +}; + +#if defined(CONFIG_DVB_SI21XX) || \ + (defined(CONFIG_DVB_SI21XX_MODULE) && defined(MODULE)) +extern struct dvb_frontend *si21xx_attach(const struct si21xx_config *config, + struct i2c_adapter *i2c); +#else +static inline struct dvb_frontend *si21xx_attach( + const struct si21xx_config *config, struct i2c_adapter *i2c) +{ + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); + return NULL; +} +#endif + +static inline int si21xx_writeregister(struct dvb_frontend *fe, u8 reg, u8 val) +{ + int r = 0; + u8 buf[] = {reg, val}; + if (fe->ops.write) + r = fe->ops.write(fe, buf, 2); + return r; +} + +#endif -- cgit v0.10.2 From 21b007b94c714cda3ebf0fa5b4e40342d2444f79 Mon Sep 17 00:00:00 2001 From: "Igor M. Liplianin" Date: Wed, 17 Sep 2008 19:19:19 -0300 Subject: V4L/DVB (9018): Add support for USB card modification with SI2109/2110 demodulator. Add support for USB card modification with SI2109/2110 demodulator. Signed-off-by: Igor M. Liplianin Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/dvb/dvb-usb/dw2102.c b/drivers/media/dvb/dvb-usb/dw2102.c index ad3d6fc..20ba3f1 100644 --- a/drivers/media/dvb/dvb-usb/dw2102.c +++ b/drivers/media/dvb/dvb-usb/dw2102.c @@ -11,6 +11,7 @@ */ #include #include "dw2102.h" +#include "si21xx.h" #include "stv0299.h" #include "z0194a.h" #include "cx24116.h" @@ -23,8 +24,8 @@ #define USB_PID_DW2104 0x2104 #endif -#define DW2102_READ_MSG 0 -#define DW2102_WRITE_MSG 1 +#define DW210X_READ_MSG 0 +#define DW210X_WRITE_MSG 1 #define REG_1F_SYMBOLRATE_BYTE0 0x1f #define REG_20_SYMBOLRATE_BYTE1 0x20 @@ -33,10 +34,10 @@ #define DW2102_VOLTAGE_CTRL (0x1800) #define DW2102_RC_QUERY (0x1a00) -struct dw2102_state { +struct dw210x_state { u32 last_key_pressed; }; -struct dw2102_rc_keys { +struct dw210x_rc_keys { u32 keycode; u32 event; }; @@ -48,28 +49,27 @@ MODULE_PARM_DESC(debug, "set debugging level (1=info 2=xfer (or-able))." DVB_USB DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); -static int dw2102_op_rw(struct usb_device *dev, u8 request, u16 value, +static int dw210x_op_rw(struct usb_device *dev, u8 request, u16 value, u16 index, u8 * data, u16 len, int flags) { int ret; u8 u8buf[len]; - unsigned int pipe = (flags == DW2102_READ_MSG) ? + unsigned int pipe = (flags == DW210X_READ_MSG) ? usb_rcvctrlpipe(dev, 0) : usb_sndctrlpipe(dev, 0); - u8 request_type = (flags == DW2102_READ_MSG) ? USB_DIR_IN : USB_DIR_OUT; + u8 request_type = (flags == DW210X_READ_MSG) ? USB_DIR_IN : USB_DIR_OUT; - if (flags == DW2102_WRITE_MSG) + if (flags == DW210X_WRITE_MSG) memcpy(u8buf, data, len); ret = usb_control_msg(dev, pipe, request, request_type | USB_TYPE_VENDOR, value, index , u8buf, len, 2000); - if (flags == DW2102_READ_MSG) + if (flags == DW210X_READ_MSG) memcpy(data, u8buf, len); return ret; } /* I2C */ - static int dw2102_i2c_transfer(struct i2c_adapter *adap, struct i2c_msg msg[], int num) { @@ -89,10 +89,9 @@ struct dvb_usb_device *d = i2c_get_adapdata(adap); value = msg[0].buf[0];/* register */ for (i = 0; i < msg[1].len; i++) { value = value + i; - ret = dw2102_op_rw(d->udev, 0xb5, value, 0, - buf6, 2, DW2102_READ_MSG); + ret = dw210x_op_rw(d->udev, 0xb5, value, 0, + buf6, 2, DW210X_READ_MSG); msg[1].buf[i] = buf6[0]; - } break; case 1: @@ -102,8 +101,8 @@ struct dvb_usb_device *d = i2c_get_adapdata(adap); buf6[0] = 0x2a; buf6[1] = msg[0].buf[0]; buf6[2] = msg[0].buf[1]; - ret = dw2102_op_rw(d->udev, 0xb2, 0, 0, - buf6, 3, DW2102_WRITE_MSG); + ret = dw210x_op_rw(d->udev, 0xb2, 0, 0, + buf6, 3, DW210X_WRITE_MSG); break; case 0x60: if (msg[0].flags == 0) { @@ -115,26 +114,26 @@ struct dvb_usb_device *d = i2c_get_adapdata(adap); buf6[4] = msg[0].buf[1]; buf6[5] = msg[0].buf[2]; buf6[6] = msg[0].buf[3]; - ret = dw2102_op_rw(d->udev, 0xb2, 0, 0, - buf6, 7, DW2102_WRITE_MSG); + ret = dw210x_op_rw(d->udev, 0xb2, 0, 0, + buf6, 7, DW210X_WRITE_MSG); } else { /* read from tuner */ - ret = dw2102_op_rw(d->udev, 0xb5, 0,0, - buf6, 1, DW2102_READ_MSG); + ret = dw210x_op_rw(d->udev, 0xb5, 0, 0, + buf6, 1, DW210X_READ_MSG); msg[0].buf[0] = buf6[0]; } break; case (DW2102_RC_QUERY): - ret = dw2102_op_rw(d->udev, 0xb8, 0, 0, - buf6, 2, DW2102_READ_MSG); + ret = dw210x_op_rw(d->udev, 0xb8, 0, 0, + buf6, 2, DW210X_READ_MSG); msg[0].buf[0] = buf6[0]; msg[0].buf[1] = buf6[1]; break; case (DW2102_VOLTAGE_CTRL): buf6[0] = 0x30; buf6[1] = msg[0].buf[0]; - ret = dw2102_op_rw(d->udev, 0xb2, 0, 0, - buf6, 2, DW2102_WRITE_MSG); + ret = dw210x_op_rw(d->udev, 0xb2, 0, 0, + buf6, 2, DW210X_WRITE_MSG); break; } @@ -145,6 +144,62 @@ struct dvb_usb_device *d = i2c_get_adapdata(adap); return num; } +static int dw2102_serit_i2c_transfer(struct i2c_adapter *adap, + struct i2c_msg msg[], int num) +{ + struct dvb_usb_device *d = i2c_get_adapdata(adap); + int ret = 0; + u8 buf6[] = {0, 0, 0, 0, 0, 0, 0}; + + if (!d) + return -ENODEV; + if (mutex_lock_interruptible(&d->i2c_mutex) < 0) + return -EAGAIN; + + switch (num) { + case 2: + /* read si2109 register by number */ + buf6[0] = 0xd0; + buf6[1] = msg[0].len; + buf6[2] = msg[0].buf[0]; + ret = dw210x_op_rw(d->udev, 0xc2, 0, 0, + buf6, msg[0].len + 2, DW210X_WRITE_MSG); + /* read si2109 register */ + ret = dw210x_op_rw(d->udev, 0xc3, 0xd0, 0, + buf6, msg[1].len + 2, DW210X_READ_MSG); + memcpy(msg[1].buf, buf6 + 2, msg[1].len); + + break; + case 1: + switch (msg[0].addr) { + case 0x68: + /* write to si2109 register */ + buf6[0] = 0xd0; + buf6[1] = msg[0].len; + memcpy(buf6 + 2, msg[0].buf, msg[0].len); + ret = dw210x_op_rw(d->udev, 0xc2, 0, 0, buf6, + msg[0].len + 2, DW210X_WRITE_MSG); + break; + case(DW2102_RC_QUERY): + ret = dw210x_op_rw(d->udev, 0xb8, 0, 0, + buf6, 2, DW210X_READ_MSG); + msg[0].buf[0] = buf6[0]; + msg[0].buf[1] = buf6[1]; + break; + case(DW2102_VOLTAGE_CTRL): + buf6[0] = 0x30; + buf6[1] = msg[0].buf[0]; + ret = dw210x_op_rw(d->udev, 0xb2, 0, 0, + buf6, 2, DW210X_WRITE_MSG); + break; + } + break; + } + + mutex_unlock(&d->i2c_mutex); + return num; +} + static int dw2104_i2c_transfer(struct i2c_adapter *adap, struct i2c_msg msg[], int num) { struct dvb_usb_device *d = i2c_get_adapdata(adap); @@ -164,11 +219,11 @@ static int dw2104_i2c_transfer(struct i2c_adapter *adap, struct i2c_msg msg[], i obuf[0] = 0xaa; obuf[1] = msg[0].len; obuf[2] = msg[0].buf[0]; - ret = dw2102_op_rw(d->udev, 0xc2, 0, 0, - obuf, msg[0].len + 2, DW2102_WRITE_MSG); + ret = dw210x_op_rw(d->udev, 0xc2, 0, 0, + obuf, msg[0].len + 2, DW210X_WRITE_MSG); /* second read registers */ - ret = dw2102_op_rw(d->udev, 0xc3, 0xab , 0, - ibuf, msg[1].len + 2, DW2102_READ_MSG); + ret = dw210x_op_rw(d->udev, 0xc3, 0xab , 0, + ibuf, msg[1].len + 2, DW210X_READ_MSG); memcpy(msg[1].buf, ibuf + 2, msg[1].len); break; @@ -187,8 +242,8 @@ static int dw2104_i2c_transfer(struct i2c_adapter *adap, struct i2c_msg msg[], i i = 1; do { memcpy(obuf + 3, msg[0].buf + i, (len > 16 ? 16 : len)); - ret = dw2102_op_rw(d->udev, 0xc2, 0, 0, - obuf, (len > 16 ? 16 : len) + 3, DW2102_WRITE_MSG); + ret = dw210x_op_rw(d->udev, 0xc2, 0, 0, + obuf, (len > 16 ? 16 : len) + 3, DW210X_WRITE_MSG); i += 16; len -= 16; } while (len > 0); @@ -198,15 +253,15 @@ static int dw2104_i2c_transfer(struct i2c_adapter *adap, struct i2c_msg msg[], i obuf[0] = 0xaa; obuf[1] = msg[0].len; memcpy(obuf + 2, msg[0].buf, msg[0].len); - ret = dw2102_op_rw(d->udev, 0xc2, 0, 0, - obuf, msg[0].len + 2, DW2102_WRITE_MSG); + ret = dw210x_op_rw(d->udev, 0xc2, 0, 0, + obuf, msg[0].len + 2, DW210X_WRITE_MSG); } break; } case(DW2102_RC_QUERY): { u8 ibuf[2]; - ret = dw2102_op_rw(d->udev, 0xb8, 0, 0, - ibuf, 2, DW2102_READ_MSG); + ret = dw210x_op_rw(d->udev, 0xb8, 0, 0, + ibuf, 2, DW210X_READ_MSG); memcpy(msg[0].buf, ibuf , 2); break; } @@ -214,8 +269,8 @@ static int dw2104_i2c_transfer(struct i2c_adapter *adap, struct i2c_msg msg[], i u8 obuf[2]; obuf[0] = 0x30; obuf[1] = msg[0].buf[0]; - ret = dw2102_op_rw(d->udev, 0xb2, 0, 0, - obuf, 2, DW2102_WRITE_MSG); + ret = dw210x_op_rw(d->udev, 0xb2, 0, 0, + obuf, 2, DW210X_WRITE_MSG); break; } } @@ -227,29 +282,34 @@ static int dw2104_i2c_transfer(struct i2c_adapter *adap, struct i2c_msg msg[], i return num; } -static u32 dw2102_i2c_func(struct i2c_adapter *adapter) +static u32 dw210x_i2c_func(struct i2c_adapter *adapter) { return I2C_FUNC_I2C; } static struct i2c_algorithm dw2102_i2c_algo = { .master_xfer = dw2102_i2c_transfer, - .functionality = dw2102_i2c_func, + .functionality = dw210x_i2c_func, +}; + +static struct i2c_algorithm dw2102_serit_i2c_algo = { + .master_xfer = dw2102_serit_i2c_transfer, + .functionality = dw210x_i2c_func, }; static struct i2c_algorithm dw2104_i2c_algo = { .master_xfer = dw2104_i2c_transfer, - .functionality = dw2102_i2c_func, + .functionality = dw210x_i2c_func, }; -static int dw2102_read_mac_address(struct dvb_usb_device *d, u8 mac[6]) +static int dw210x_read_mac_address(struct dvb_usb_device *d, u8 mac[6]) { int i; u8 ibuf[] = {0, 0}; u8 eeprom[256], eepromline[16]; for (i = 0; i < 256; i++) { - if (dw2102_op_rw(d->udev, 0xb6, 0xa0 , i, ibuf, 2, DW2102_READ_MSG) < 0) { + if (dw210x_op_rw(d->udev, 0xb6, 0xa0 , i, ibuf, 2, DW210X_READ_MSG) < 0) { err("read eeprom failed."); return -1; } else { @@ -265,7 +325,7 @@ static int dw2102_read_mac_address(struct dvb_usb_device *d, u8 mac[6]) return 0; }; -static int dw2102_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage) +static int dw210x_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage) { static u8 command_13v[1] = {0x00}; static u8 command_18v[1] = {0x01}; @@ -287,25 +347,46 @@ static struct cx24116_config dw2104_config = { .mpg_clk_pos_pol = 0x01, }; +static struct si21xx_config serit_sp1511lhb_config = { + .demod_address = 0x68, + .min_delay_ms = 100, + +}; + static int dw2104_frontend_attach(struct dvb_usb_adapter *d) { if ((d->fe = dvb_attach(cx24116_attach, &dw2104_config, &d->dev->i2c_adap)) != NULL) { - d->fe->ops.set_voltage = dw2102_set_voltage; + d->fe->ops.set_voltage = dw210x_set_voltage; info("Attached cx24116!\n"); return 0; } return -EIO; } +static struct dvb_usb_device_properties dw2102_properties; + static int dw2102_frontend_attach(struct dvb_usb_adapter *d) { - d->fe = dvb_attach(stv0299_attach, &sharp_z0194a_config, - &d->dev->i2c_adap); - if (d->fe != NULL) { - d->fe->ops.set_voltage = dw2102_set_voltage; - info("Attached stv0299!\n"); - return 0; + if (dw2102_properties.i2c_algo == &dw2102_serit_i2c_algo) { + /*dw2102_properties.adapter->tuner_attach = NULL;*/ + d->fe = dvb_attach(si21xx_attach, &serit_sp1511lhb_config, + &d->dev->i2c_adap); + if (d->fe != NULL) { + d->fe->ops.set_voltage = dw210x_set_voltage; + info("Attached si21xx!\n"); + return 0; + } + } + if (dw2102_properties.i2c_algo == &dw2102_i2c_algo) { + /*dw2102_properties.adapter->tuner_attach = dw2102_tuner_attach;*/ + d->fe = dvb_attach(stv0299_attach, &sharp_z0194a_config, + &d->dev->i2c_adap); + if (d->fe != NULL) { + d->fe->ops.set_voltage = dw210x_set_voltage; + info("Attached stv0299!\n"); + return 0; + } } return -EIO; } @@ -317,7 +398,7 @@ static int dw2102_tuner_attach(struct dvb_usb_adapter *adap) return 0; } -static struct dvb_usb_rc_key dw2102_rc_keys[] = { +static struct dvb_usb_rc_key dw210x_rc_keys[] = { { 0xf8, 0x0a, KEY_Q }, /*power*/ { 0xf8, 0x0c, KEY_M }, /*mute*/ { 0xf8, 0x11, KEY_1 }, @@ -356,7 +437,7 @@ static struct dvb_usb_rc_key dw2102_rc_keys[] = { static int dw2102_rc_query(struct dvb_usb_device *d, u32 *event, int *state) { - struct dw2102_state *st = d->priv; + struct dw210x_state *st = d->priv; u8 key[2]; struct i2c_msg msg[] = { {.addr = DW2102_RC_QUERY, .flags = I2C_M_RD, .buf = key, @@ -366,12 +447,12 @@ static int dw2102_rc_query(struct dvb_usb_device *d, u32 *event, int *state) *state = REMOTE_NO_KEY_PRESSED; if (dw2102_i2c_transfer(&d->i2c_adap, msg, 1) == 1) { - for (i = 0; i < ARRAY_SIZE(dw2102_rc_keys); i++) { - if (dw2102_rc_keys[i].data == msg[0].buf[0]) { + for (i = 0; i < ARRAY_SIZE(dw210x_rc_keys); i++) { + if (dw210x_rc_keys[i].data == msg[0].buf[0]) { *state = REMOTE_KEY_PRESSED; - *event = dw2102_rc_keys[i].event; + *event = dw210x_rc_keys[i].event; st->last_key_pressed = - dw2102_rc_keys[i].event; + dw210x_rc_keys[i].event; break; } st->last_key_pressed = 0; @@ -418,15 +499,15 @@ static int dw2102_load_firmware(struct usb_device *dev, p = kmalloc(fw->size, GFP_KERNEL); reset = 1; /*stop the CPU*/ - dw2102_op_rw(dev, 0xa0, 0x7f92, 0, &reset, 1, DW2102_WRITE_MSG); - dw2102_op_rw(dev, 0xa0, 0xe600, 0, &reset, 1, DW2102_WRITE_MSG); + dw210x_op_rw(dev, 0xa0, 0x7f92, 0, &reset, 1, DW210X_WRITE_MSG); + dw210x_op_rw(dev, 0xa0, 0xe600, 0, &reset, 1, DW210X_WRITE_MSG); if (p != NULL) { memcpy(p, fw->data, fw->size); for (i = 0; i < fw->size; i += 0x40) { b = (u8 *) p + i; - if (dw2102_op_rw(dev, 0xa0, i, 0, b , 0x40, - DW2102_WRITE_MSG) != 0x40) { + if (dw210x_op_rw(dev, 0xa0, i, 0, b , 0x40, + DW210X_WRITE_MSG) != 0x40) { err("error while transferring firmware"); ret = -EINVAL; break; @@ -434,13 +515,13 @@ static int dw2102_load_firmware(struct usb_device *dev, } /* restart the CPU */ reset = 0; - if (ret || dw2102_op_rw(dev, 0xa0, 0x7f92, 0, &reset, 1, - DW2102_WRITE_MSG) != 1) { + if (ret || dw210x_op_rw(dev, 0xa0, 0x7f92, 0, &reset, 1, + DW210X_WRITE_MSG) != 1) { err("could not restart the USB controller CPU."); ret = -EINVAL; } - if (ret || dw2102_op_rw(dev, 0xa0, 0xe600, 0, &reset, 1, - DW2102_WRITE_MSG) != 1) { + if (ret || dw210x_op_rw(dev, 0xa0, 0xe600, 0, &reset, 1, + DW210X_WRITE_MSG) != 1) { err("could not restart the USB controller CPU."); ret = -EINVAL; } @@ -449,27 +530,32 @@ static int dw2102_load_firmware(struct usb_device *dev, case USB_PID_DW2104: case 0xd650: reset = 1; - dw2102_op_rw(dev, 0xc4, 0x0000, 0, &reset, 1, - DW2102_WRITE_MSG); + dw210x_op_rw(dev, 0xc4, 0x0000, 0, &reset, 1, + DW210X_WRITE_MSG); reset = 0; - dw2102_op_rw(dev, 0xbf, 0x0040, 0, &reset, 0, - DW2102_WRITE_MSG); + dw210x_op_rw(dev, 0xbf, 0x0040, 0, &reset, 0, + DW210X_WRITE_MSG); break; case USB_PID_DW2102: - dw2102_op_rw(dev, 0xbf, 0x0040, 0, &reset, 0, - DW2102_WRITE_MSG); - dw2102_op_rw(dev, 0xb9, 0x0000, 0, &reset16[0], 2, - DW2102_READ_MSG); + dw210x_op_rw(dev, 0xbf, 0x0040, 0, &reset, 0, + DW210X_WRITE_MSG); + dw210x_op_rw(dev, 0xb9, 0x0000, 0, &reset16[0], 2, + DW210X_READ_MSG); + /* check STV0299 frontend */ + dw210x_op_rw(dev, 0xb5, 0, 0, &reset16[0], 2, + DW210X_READ_MSG); + if (reset16[0] == 0xa1) + dw2102_properties.i2c_algo = &dw2102_i2c_algo; break; case 0x2101: - dw2102_op_rw(dev, 0xbc, 0x0030, 0, &reset16[0], 2, - DW2102_READ_MSG); - dw2102_op_rw(dev, 0xba, 0x0000, 0, &reset16[0], 7, - DW2102_READ_MSG); - dw2102_op_rw(dev, 0xba, 0x0000, 0, &reset16[0], 7, - DW2102_READ_MSG); - dw2102_op_rw(dev, 0xb9, 0x0000, 0, &reset16[0], 2, - DW2102_READ_MSG); + dw210x_op_rw(dev, 0xbc, 0x0030, 0, &reset16[0], 2, + DW210X_READ_MSG); + dw210x_op_rw(dev, 0xba, 0x0000, 0, &reset16[0], 7, + DW210X_READ_MSG); + dw210x_op_rw(dev, 0xba, 0x0000, 0, &reset16[0], 7, + DW210X_READ_MSG); + dw210x_op_rw(dev, 0xb9, 0x0000, 0, &reset16[0], 2, + DW210X_READ_MSG); break; } msleep(100); @@ -482,12 +568,12 @@ static struct dvb_usb_device_properties dw2102_properties = { .caps = DVB_USB_IS_AN_I2C_ADAPTER, .usb_ctrl = DEVICE_SPECIFIC, .firmware = "dvb-usb-dw2102.fw", - .size_of_priv = sizeof(struct dw2102_state), + .size_of_priv = sizeof(struct dw210x_state), .no_reconnect = 1, - .i2c_algo = &dw2102_i2c_algo, - .rc_key_map = dw2102_rc_keys, - .rc_key_map_size = ARRAY_SIZE(dw2102_rc_keys), + .i2c_algo = &dw2102_serit_i2c_algo, + .rc_key_map = dw210x_rc_keys, + .rc_key_map_size = ARRAY_SIZE(dw210x_rc_keys), .rc_interval = 150, .rc_query = dw2102_rc_query, @@ -495,7 +581,7 @@ static struct dvb_usb_device_properties dw2102_properties = { /* parameter for the MPEG2-data transfer */ .num_adapters = 1, .download_firmware = dw2102_load_firmware, - .read_mac_address = dw2102_read_mac_address, + .read_mac_address = dw210x_read_mac_address, .adapter = { { .frontend_attach = dw2102_frontend_attach, @@ -530,12 +616,12 @@ static struct dvb_usb_device_properties dw2104_properties = { .caps = DVB_USB_IS_AN_I2C_ADAPTER, .usb_ctrl = DEVICE_SPECIFIC, .firmware = "dvb-usb-dw2104.fw", - .size_of_priv = sizeof(struct dw2102_state), + .size_of_priv = sizeof(struct dw210x_state), .no_reconnect = 1, .i2c_algo = &dw2104_i2c_algo, - .rc_key_map = dw2102_rc_keys, - .rc_key_map_size = ARRAY_SIZE(dw2102_rc_keys), + .rc_key_map = dw210x_rc_keys, + .rc_key_map_size = ARRAY_SIZE(dw210x_rc_keys), .rc_interval = 150, .rc_query = dw2102_rc_query, @@ -543,7 +629,7 @@ static struct dvb_usb_device_properties dw2104_properties = { /* parameter for the MPEG2-data transfer */ .num_adapters = 1, .download_firmware = dw2102_load_firmware, - .read_mac_address = dw2102_read_mac_address, + .read_mac_address = dw210x_read_mac_address, .adapter = { { .frontend_attach = dw2104_frontend_attach, -- cgit v0.10.2 From 4cd7fb876ce0beecd4907f81d1a16ea95f5d6d6e Mon Sep 17 00:00:00 2001 From: Oleg Roitburd Date: Wed, 17 Sep 2008 11:30:21 -0300 Subject: V4L/DVB (9019): Added support for Omicom SS4 DVB-S/S2 card Added support for Omicom SS4 DVB-S/S2 card. The card based on cx24116 demodulator. Signed-off-by: Oleg Roitburd Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/cx88/cx88-cards.c b/drivers/media/video/cx88/cx88-cards.c index 23948da..afaafd5 100644 --- a/drivers/media/video/cx88/cx88-cards.c +++ b/drivers/media/video/cx88/cx88-cards.c @@ -1721,6 +1721,18 @@ static const struct cx88_board cx88_boards[] = { } }, .mpeg = CX88_MPEG_DVB, }, + [CX88_BOARD_OMICOM_SS4_PCI] = { + .name = "Omicom SS4 DVB-S/S2 PCI", + .tuner_type = UNSET, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .input = {{ + .type = CX88_VMUX_DVB, + .vmux = 0, + } }, + .mpeg = CX88_MPEG_DVB, + }, }; /* ------------------------------------------------------------------ */ @@ -2094,6 +2106,10 @@ static const struct cx88_subid cx88_subids[] = { .subvendor = 0xD460, .subdevice = 0x9022, .card = CX88_BOARD_TEVII_S460, + }, { + .subvendor = 0xA044, + .subdevice = 0x2011, + .card = CX88_BOARD_OMICOM_SS4_PCI, }, }; @@ -2673,6 +2689,12 @@ static void cx88_card_setup(struct cx88_core *core) cx_write(MO_SRST_IO, 1); msleep(100); break; + case CX88_BOARD_OMICOM_SS4_PCI: + cx_write(MO_SRST_IO, 0); + msleep(100); + cx_write(MO_SRST_IO, 1); + msleep(100); + break; } /*end switch() */ diff --git a/drivers/media/video/cx88/cx88-dvb.c b/drivers/media/video/cx88/cx88-dvb.c index ce1752d..c86802b 100644 --- a/drivers/media/video/cx88/cx88-dvb.c +++ b/drivers/media/video/cx88/cx88-dvb.c @@ -958,6 +958,15 @@ static int dvb_register(struct cx8802_dev *dev) dev->dvb.frontend->ops.set_voltage = tevii_dvbs_set_voltage; } break; + case CX88_BOARD_OMICOM_SS4_PCI: + dev->dvb.frontend = dvb_attach(cx24116_attach, + &hauppauge_hvr4000_config, + &core->i2c_adap); + if (dev->dvb.frontend != NULL) { + core->prev_set_voltage = dev->dvb.frontend->ops.set_voltage; + dev->dvb.frontend->ops.set_voltage = tevii_dvbs_set_voltage; + } + break; default: printk(KERN_ERR "%s/2: The frontend of your DVB/ATSC card isn't supported yet\n", core->name); diff --git a/drivers/media/video/cx88/cx88.h b/drivers/media/video/cx88/cx88.h index 2b82c6a..628371b 100644 --- a/drivers/media/video/cx88/cx88.h +++ b/drivers/media/video/cx88/cx88.h @@ -224,6 +224,7 @@ extern struct sram_channel cx88_sram_channels[]; #define CX88_BOARD_HAUPPAUGE_HVR4000 68 #define CX88_BOARD_HAUPPAUGE_HVR4000LITE 69 #define CX88_BOARD_TEVII_S460 70 +#define CX88_BOARD_OMICOM_SS4_PCI 71 enum cx88_itype { CX88_VMUX_COMPOSITE1 = 1, -- cgit v0.10.2 From ee73042c002b435cc8bc49414d466cc3f31af123 Mon Sep 17 00:00:00 2001 From: Oleg Roitburd Date: Wed, 17 Sep 2008 11:58:33 -0300 Subject: V4L/DVB (9020): Added support for TBS 8920 DVB-S/S2 card Added support for TBS 8920 DVB-S/S2 card. The card based on cx24116 demodulator. Signed-off-by: Oleg Roitburd Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/cx88/cx88-cards.c b/drivers/media/video/cx88/cx88-cards.c index afaafd5..a0e6156 100644 --- a/drivers/media/video/cx88/cx88-cards.c +++ b/drivers/media/video/cx88/cx88-cards.c @@ -1733,6 +1733,18 @@ static const struct cx88_board cx88_boards[] = { } }, .mpeg = CX88_MPEG_DVB, }, + [CX88_BOARD_TBS_8920] = { + .name = "TBS 8920 DVB-S/S2", + .tuner_type = TUNER_ABSENT, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .input = {{ + .type = CX88_VMUX_DVB, + .vmux = 1, + } }, + .mpeg = CX88_MPEG_DVB, + }, }; /* ------------------------------------------------------------------ */ @@ -2110,6 +2122,10 @@ static const struct cx88_subid cx88_subids[] = { .subvendor = 0xA044, .subdevice = 0x2011, .card = CX88_BOARD_OMICOM_SS4_PCI, + }, { + .subvendor = 0x8920, + .subdevice = 0x8888, + .card = CX88_BOARD_TBS_8920, }, }; @@ -2695,6 +2711,12 @@ static void cx88_card_setup(struct cx88_core *core) cx_write(MO_SRST_IO, 1); msleep(100); break; + case CX88_BOARD_TBS_8920: + cx_write(MO_SRST_IO, 0); + msleep(100); + cx_write(MO_SRST_IO, 1); + msleep(100); + break; } /*end switch() */ diff --git a/drivers/media/video/cx88/cx88-dvb.c b/drivers/media/video/cx88/cx88-dvb.c index c86802b..a6c4f66 100644 --- a/drivers/media/video/cx88/cx88-dvb.c +++ b/drivers/media/video/cx88/cx88-dvb.c @@ -967,6 +967,15 @@ static int dvb_register(struct cx8802_dev *dev) dev->dvb.frontend->ops.set_voltage = tevii_dvbs_set_voltage; } break; + case CX88_BOARD_TBS_8920: + dev->dvb.frontend = dvb_attach(cx24116_attach, + &hauppauge_hvr4000_config, + &core->i2c_adap); + if (dev->dvb.frontend != NULL) { + core->prev_set_voltage = dev->dvb.frontend->ops.set_voltage; + dev->dvb.frontend->ops.set_voltage = tevii_dvbs_set_voltage; + } + break; default: printk(KERN_ERR "%s/2: The frontend of your DVB/ATSC card isn't supported yet\n", core->name); diff --git a/drivers/media/video/cx88/cx88.h b/drivers/media/video/cx88/cx88.h index 628371b..fa3a725 100644 --- a/drivers/media/video/cx88/cx88.h +++ b/drivers/media/video/cx88/cx88.h @@ -225,6 +225,7 @@ extern struct sram_channel cx88_sram_channels[]; #define CX88_BOARD_HAUPPAUGE_HVR4000LITE 69 #define CX88_BOARD_TEVII_S460 70 #define CX88_BOARD_OMICOM_SS4_PCI 71 +#define CX88_BOARD_TBS_8920 72 enum cx88_itype { CX88_VMUX_COMPOSITE1 = 1, -- cgit v0.10.2 From 5bacea3b9db1b88eeae5427f41efe65138f056da Mon Sep 17 00:00:00 2001 From: Steven Toth Date: Mon, 22 Sep 2008 01:45:01 -0300 Subject: V4L/DVB (9021): S2API: Add Kconf dependency Patch provided by Darron Broad Signed-off-by: Steven Toth Signed-off-by: Mauro Carvalho Chehab diff --git a/Documentation/video4linux/CARDLIST.cx88 b/Documentation/video4linux/CARDLIST.cx88 index b51485c..8fea297 100644 --- a/Documentation/video4linux/CARDLIST.cx88 +++ b/Documentation/video4linux/CARDLIST.cx88 @@ -69,3 +69,5 @@ 68 -> Hauppauge WinTV-HVR4000 DVB-S/S2/T/Hybrid [0070:6900,0070:6904,0070:6902] 69 -> Hauppauge WinTV-HVR4000(Lite) DVB-S/S2 [0070:6905,0070:6906] 70 -> TeVii S460 DVB-S/S2 [D460:9022] + 71 -> Omicom SS4 DVB-S/S2 PCI [A044:2011] + 72 -> TBS 8920 DVB-S/S2 [8920:8888] diff --git a/drivers/media/video/cx88/Kconfig b/drivers/media/video/cx88/Kconfig index 9dd7bdf..4f65ce3 100644 --- a/drivers/media/video/cx88/Kconfig +++ b/drivers/media/video/cx88/Kconfig @@ -58,6 +58,7 @@ config VIDEO_CX88_DVB select DVB_ISL6421 if !DVB_FE_CUSTOMISE select MEDIA_TUNER_SIMPLE if !DVB_FE_CUSTOMISE select DVB_S5H1411 if !DVB_FE_CUSTOMISE + select DVB_CX24116 if !DVB_FE_CUSTOMISE ---help--- This adds support for DVB/ATSC cards based on the Conexant 2388x chip. -- cgit v0.10.2 From 1cbd89dbde2a473f2f3d47ae31163d80fc8ca7e7 Mon Sep 17 00:00:00 2001 From: Steven Toth Date: Mon, 22 Sep 2008 01:46:26 -0300 Subject: V4L/DVB (9022): cx88: Enable TDA9887 on HVR1300 / 3000 / 4000 Patch provided by Darron Broad. Signed-off-by: Steven Toth Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/cx88/cx88-i2c.c b/drivers/media/video/cx88/cx88-i2c.c index d7406a9..8e74d64 100644 --- a/drivers/media/video/cx88/cx88-i2c.c +++ b/drivers/media/video/cx88/cx88-i2c.c @@ -201,7 +201,23 @@ int cx88_i2c_init(struct cx88_core *core, struct pci_dev *pci) core->i2c_rc = i2c_bit_add_bus(&core->i2c_adap); if (0 == core->i2c_rc) { + static u8 tuner_data[] = + { 0x0b, 0xdc, 0x86, 0x52 }; + static struct i2c_msg tuner_msg = + { .flags = 0, .addr = 0xc2 >> 1, .buf = tuner_data, .len = 4 }; + dprintk(1, "i2c register ok\n"); + switch( core->boardnr ) { + case CX88_BOARD_HAUPPAUGE_HVR1300: + case CX88_BOARD_HAUPPAUGE_HVR3000: + case CX88_BOARD_HAUPPAUGE_HVR4000: + printk("%s: i2c init: enabling analog demod on HVR1300/3000/4000 tuner\n", + core->name); + i2c_transfer(core->i2c_client.adapter, &tuner_msg, 1); + break; + default: + break; + } if (i2c_scan) do_i2c_scan(core->name,&core->i2c_client); } else -- cgit v0.10.2 From 2491fbb7d5d83ea78c6127cb589c9e6c7649e0aa Mon Sep 17 00:00:00 2001 From: Steven Toth Date: Mon, 22 Sep 2008 01:48:13 -0300 Subject: V4L/DVB (9023): cx88: HVR3000 / 4000 GPIO related changes Patch by Darron Broad. Signed-off-by: Steven Toth Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/cx88/cx88-cards.c b/drivers/media/video/cx88/cx88-cards.c index a0e6156..0203c75 100644 --- a/drivers/media/video/cx88/cx88-cards.c +++ b/drivers/media/video/cx88/cx88-cards.c @@ -1349,27 +1349,30 @@ static const struct cx88_board cx88_boards[] = { .radio_addr = ADDR_UNSET, .tda9887_conf = TDA9887_PRESENT, .audio_chip = V4L2_IDENT_WM8775, + /* + * gpio0 as reported by Mike Crash + */ .input = {{ .type = CX88_VMUX_TELEVISION, .vmux = 0, - .gpio0 = 0xe780, + .gpio0 = 0xef88, .audioroute = 1, },{ .type = CX88_VMUX_COMPOSITE1, .vmux = 1, - .gpio0 = 0xe780, + .gpio0 = 0xef88, .audioroute = 2, },{ .type = CX88_VMUX_SVIDEO, .vmux = 2, - .gpio0 = 0xe780, + .gpio0 = 0xef88, .audioroute = 2, }}, /* fixme: Add radio support */ .mpeg = CX88_MPEG_DVB | CX88_MPEG_BLACKBIRD, .radio = { .type = CX88_RADIO, - .gpio0 = 0xe780, + .gpio0 = 0xef88, }, }, [CX88_BOARD_ADSTECH_PTV_390] = { @@ -1680,6 +1683,26 @@ static const struct cx88_board cx88_boards[] = { * S-Video 0xc4bf 0xc4bb * Composite1 0xc4ff 0xc4fb * S-Video1 0xc4ff 0xc4fb + * + * BIT VALUE FUNCTION GP{x}_IO + * 0 1 I:? + * 1 1 I:? + * 2 1 O:DVB-T DEMOD ENABLE LOW/ANALOG DEMOD ENABLE HIGH + * 3 1 I:? + * 4 1 I:? + * 5 1 I:? + * 6 0 O:INPUT SELECTOR 0=INTERNAL 1=EXPANSION + * 7 1 O:DVB-T DEMOD RESET LOW + * + * BIT VALUE FUNCTION GP{x}_OE + * 8 0 I + * 9 0 I + * a 1 O + * b 0 I + * c 0 I + * d 0 I + * e 1 O + * f 1 O */ .input = {{ .type = CX88_VMUX_TELEVISION, @@ -2512,13 +2535,18 @@ static void cx88_card_setup_pre_i2c(struct cx88_core *core) { switch (core->boardnr) { case CX88_BOARD_HAUPPAUGE_HVR1300: - /* Bring the 702 demod up before i2c scanning/attach or devices are hidden */ - /* We leave here with the 702 on the bus */ - cx_write(MO_GP0_IO, 0x0000e780); + /* + * Bring the 702 demod up before i2c scanning/attach or devices are hidden + * We leave here with the 702 on the bus + * + * "reset the IR receiver on GPIO[3]" + * Reported by Mike Crash + */ + cx_write(MO_GP0_IO, 0x0000ef88); udelay(1000); - cx_clear(MO_GP0_IO, 0x00000080); + cx_clear(MO_GP0_IO, 0x00000088); udelay(50); - cx_set(MO_GP0_IO, 0x00000080); /* 702 out of reset */ + cx_set(MO_GP0_IO, 0x00000088); /* 702 out of reset */ udelay(1000); break; @@ -2531,15 +2559,18 @@ static void cx88_card_setup_pre_i2c(struct cx88_core *core) msleep(10); break; - case CX88_BOARD_DVICO_FUSIONHDTV_7_GOLD: + case CX88_BOARD_DVICO_FUSIONHDTV_7_GOLD: /* Enable the xc5000 tuner */ cx_set(MO_GP0_IO, 0x00001010); break; + + case CX88_BOARD_HAUPPAUGE_HVR3000: case CX88_BOARD_HAUPPAUGE_HVR4000: case CX88_BOARD_HAUPPAUGE_HVR4000LITE: - /* Init GPIO to allow tuner to attach */ - cx_write(MO_GP0_IO, 0x0000c4bf); + /* Init GPIO */ + cx_write(MO_GP0_IO, core->board.input[0].gpio0); udelay(1000); + break; } } -- cgit v0.10.2 From fc6e8c284bcb23ac7a576b7959803168398e390a Mon Sep 17 00:00:00 2001 From: Steven Toth Date: Tue, 23 Sep 2008 22:14:33 -0300 Subject: V4L/DVB (9024): S2API: Cleanup dtv_property remove unwanted fields. Signed-off-by: Steven Toth Signed-off-by: Mauro Carvalho Chehab diff --git a/include/linux/dvb/frontend.h b/include/linux/dvb/frontend.h index 4f3fd641..71f25f5 100644 --- a/include/linux/dvb/frontend.h +++ b/include/linux/dvb/frontend.h @@ -358,8 +358,6 @@ struct dtv_property { __u32 cmd; __u32 reserved[3]; union { - __s32 valuemin; - __s32 valuemax; __u32 data; struct { __u8 data[32]; -- cgit v0.10.2 From 8316568930074723bdc47d6777f822be0422a5b7 Mon Sep 17 00:00:00 2001 From: Steven Toth Date: Tue, 23 Sep 2008 22:21:26 -0300 Subject: V4L/DVB (9025): S2API: Deactivate the ISDB-T definitions We don't want to push the ISDB-T definitions into the kernel until we have a high level of confidence in the ISDB-T API. More testing is required before this code is released. Signed-off-by: Steven Toth Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/dvb/dvb-core/dvb_frontend.c b/drivers/media/dvb/dvb-core/dvb_frontend.c index 05d0b73..7da2537 100644 --- a/drivers/media/dvb/dvb-core/dvb_frontend.c +++ b/drivers/media/dvb/dvb-core/dvb_frontend.c @@ -829,17 +829,6 @@ struct dtv_cmds_h dtv_cmds[] = { .cmd = DTV_DELIVERY_SYSTEM, .set = 1, }, - [DTV_ISDB_SEGMENT_IDX] = { - .name = "DTV_ISDB_SEGMENT_IDX", - .cmd = DTV_ISDB_SEGMENT_IDX, - .set = 1, - }, - [DTV_ISDB_SEGMENT_WIDTH] = { - .name = "DTV_ISDB_SEGMENT_WIDTH", - .cmd = DTV_ISDB_SEGMENT_WIDTH, - .set = 1, - }, - /* Get */ [DTV_DISEQC_SLAVE_REPLY] = { .name = "DTV_DISEQC_SLAVE_REPLY", @@ -847,51 +836,6 @@ struct dtv_cmds_h dtv_cmds[] = { .set = 0, .buffer = 1, }, - [DTV_ISDB_LAYERA_FEC] = { - .name = "DTV_ISDB_LAYERA_FEC", - .cmd = DTV_ISDB_LAYERA_FEC, - .set = 0, - }, - [DTV_ISDB_LAYERA_MODULATION] = { - .name = "DTV_ISDB_LAYERA_MODULATION", - .cmd = DTV_ISDB_LAYERA_MODULATION, - .set = 0, - }, - [DTV_ISDB_LAYERA_SEGMENT_WIDTH] = { - .name = "DTV_ISDB_LAYERA_SEGMENT_WIDTH", - .cmd = DTV_ISDB_LAYERA_SEGMENT_WIDTH, - .set = 0, - }, - [DTV_ISDB_LAYERB_FEC] = { - .name = "DTV_ISDB_LAYERB_FEC", - .cmd = DTV_ISDB_LAYERB_FEC, - .set = 0, - }, - [DTV_ISDB_LAYERB_MODULATION] = { - .name = "DTV_ISDB_LAYERB_MODULATION", - .cmd = DTV_ISDB_LAYERB_MODULATION, - .set = 0, - }, - [DTV_ISDB_LAYERB_SEGMENT_WIDTH] = { - .name = "DTV_ISDB_LAYERB_SEGMENT_WIDTH", - .cmd = DTV_ISDB_LAYERB_SEGMENT_WIDTH, - .set = 0, - }, - [DTV_ISDB_LAYERC_FEC] = { - .name = "DTV_ISDB_LAYERC_FEC", - .cmd = DTV_ISDB_LAYERC_FEC, - .set = 0, - }, - [DTV_ISDB_LAYERC_MODULATION] = { - .name = "DTV_ISDB_LAYERC_MODULATION", - .cmd = DTV_ISDB_LAYERC_MODULATION, - .set = 0, - }, - [DTV_ISDB_LAYERC_SEGMENT_WIDTH] = { - .name = "DTV_ISDB_LAYERC_SEGMENT_WIDTH", - .cmd = DTV_ISDB_LAYERC_SEGMENT_WIDTH, - .set = 0, - }, }; void dtv_property_dump(struct dtv_property *tvp) @@ -1154,41 +1098,6 @@ int dtv_property_process_get(struct dvb_frontend *fe, struct dtv_property *tvp, case DTV_DELIVERY_SYSTEM: tvp->u.data = fe->dtv_property_cache.delivery_system; break; - - /* ISDB-T Support here */ - case DTV_ISDB_SEGMENT_IDX: - tvp->u.data = fe->dtv_property_cache.isdb_segment_idx; - break; - case DTV_ISDB_SEGMENT_WIDTH: - tvp->u.data = fe->dtv_property_cache.isdb_segment_width; - break; - case DTV_ISDB_LAYERA_FEC: - tvp->u.data = fe->dtv_property_cache.isdb_layera_fec; - break; - case DTV_ISDB_LAYERA_MODULATION: - tvp->u.data = fe->dtv_property_cache.isdb_layera_modulation; - break; - case DTV_ISDB_LAYERA_SEGMENT_WIDTH: - tvp->u.data = fe->dtv_property_cache.isdb_layera_segment_width; - break; - case DTV_ISDB_LAYERB_FEC: - tvp->u.data = fe->dtv_property_cache.isdb_layerb_fec; - break; - case DTV_ISDB_LAYERB_MODULATION: - tvp->u.data = fe->dtv_property_cache.isdb_layerb_modulation; - break; - case DTV_ISDB_LAYERB_SEGMENT_WIDTH: - tvp->u.data = fe->dtv_property_cache.isdb_layerb_segment_width; - break; - case DTV_ISDB_LAYERC_FEC: - tvp->u.data = fe->dtv_property_cache.isdb_layerc_fec; - break; - case DTV_ISDB_LAYERC_MODULATION: - tvp->u.data = fe->dtv_property_cache.isdb_layerc_modulation; - break; - case DTV_ISDB_LAYERC_SEGMENT_WIDTH: - tvp->u.data = fe->dtv_property_cache.isdb_layerc_segment_width; - break; case DTV_VOLTAGE: tvp->u.data = fe->dtv_property_cache.voltage; break; @@ -1266,14 +1175,6 @@ int dtv_property_process_set(struct dvb_frontend *fe, struct dtv_property *tvp, case DTV_DELIVERY_SYSTEM: fe->dtv_property_cache.delivery_system = tvp->u.data; break; - - /* ISDB-T Support here */ - case DTV_ISDB_SEGMENT_IDX: - fe->dtv_property_cache.isdb_segment_idx = tvp->u.data; - break; - case DTV_ISDB_SEGMENT_WIDTH: - fe->dtv_property_cache.isdb_segment_width = tvp->u.data; - break; case DTV_VOLTAGE: fe->dtv_property_cache.voltage = tvp->u.data; r = dvb_frontend_ioctl_legacy(inode, file, FE_SET_VOLTAGE, diff --git a/drivers/media/dvb/dvb-core/dvb_frontend.h b/drivers/media/dvb/dvb-core/dvb_frontend.h index 2fa37f5..1c57540 100644 --- a/drivers/media/dvb/dvb-core/dvb_frontend.h +++ b/drivers/media/dvb/dvb-core/dvb_frontend.h @@ -209,19 +209,6 @@ struct dtv_frontend_properties { fe_rolloff_t rolloff; fe_delivery_system_t delivery_system; - - /* ISDB-T specifics */ - u32 isdb_segment_idx; - u32 isdb_segment_width; - fe_code_rate_t isdb_layera_fec; - fe_modulation_t isdb_layera_modulation; - u32 isdb_layera_segment_width; - fe_code_rate_t isdb_layerb_fec; - fe_modulation_t isdb_layerb_modulation; - u32 isdb_layerb_segment_width; - fe_code_rate_t isdb_layerc_fec; - fe_modulation_t isdb_layerc_modulation; - u32 isdb_layerc_segment_width; }; struct dvb_frontend { diff --git a/include/linux/dvb/frontend.h b/include/linux/dvb/frontend.h index 71f25f5..c822bc1 100644 --- a/include/linux/dvb/frontend.h +++ b/include/linux/dvb/frontend.h @@ -280,36 +280,6 @@ typedef enum dtv_cmd_types { /* New commands are always appended */ DTV_DELIVERY_SYSTEM, - - /* ISDB */ - /* maybe a dup of DTV_ISDB_SOUND_BROADCASTING_SUBCHANNEL_ID ??? */ - DTV_ISDB_SEGMENT_IDX, - DTV_ISDB_SEGMENT_WIDTH, /* 1, 3 or 13 ??? */ - - /* the central segment can be received independently or 1/3 seg in SB-mode */ - DTV_ISDB_PARTIAL_RECEPTION, - /* sound broadcasting is used 0 = 13segment, 1 = 1 or 3 see DTV_ISDB_PARTIAL_RECEPTION */ - DTV_ISDB_SOUND_BROADCASTING, - - /* only used in SB */ - /* determines the initial PRBS of the segment (to match with 13seg channel) */ - DTV_ISDB_SOUND_BROADCASTING_SUBCHANNEL_ID, - - DTV_ISDB_LAYERA_FEC, - DTV_ISDB_LAYERA_MODULATION, - DTV_ISDB_LAYERA_SEGMENT_WIDTH, - DTV_ISDB_LAYERA_TIME_INTERLEAVER, - - DTV_ISDB_LAYERB_FEC, - DTV_ISDB_LAYERB_MODULATION, - DTV_ISDB_LAYERB_SEGMENT_WIDTH, - DTV_ISDB_LAYERB_TIME_INTERLEAVING, - - DTV_ISDB_LAYERC_FEC, - DTV_ISDB_LAYERC_MODULATION, - DTV_ISDB_LAYERC_SEGMENT_WIDTH, - DTV_ISDB_LAYERC_TIME_INTERLEAVING, - } dtv_cmd_types_t; typedef enum fe_pilot { -- cgit v0.10.2 From e4aab64cb78a42e45e1d387f272712e06cf89a66 Mon Sep 17 00:00:00 2001 From: "Igor M. Liplianin" Date: Tue, 23 Sep 2008 15:43:57 -0300 Subject: V4L/DVB (9026): Add support for ST STV0288 demodulator and cards with it. Add support for ST STV0288 demodulator and cards with it, such as TeVii S420. Patch is co-authored with Georg Acher Signed-off-by: Georg Acher Signed-off-by: Igor M. Liplianin Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/dvb/dm1105/dm1105.c b/drivers/media/dvb/dm1105/dm1105.c index 0c1790f..f732144 100644 --- a/drivers/media/dvb/dm1105/dm1105.c +++ b/drivers/media/dvb/dm1105/dm1105.c @@ -39,8 +39,8 @@ #include "dvb-pll.h" #include "stv0299.h" -/*#include "stv0288.h" - *#include "stb6000.h"*/ +#include "stv0288.h" +#include "stb6000.h" #include "si21xx.h" #include "cx24116.h" #include "z0194a.h" @@ -594,13 +594,12 @@ static void dm1105dvb_hw_exit(struct dm1105dvb *dm1105dvb) dm1105dvb_dma_unmap(dm1105dvb); } -#if 0 + static struct stv0288_config earda_config = { .demod_address = 0x68, .min_delay_ms = 100, }; -#endif /* keep */ static struct si21xx_config serit_config = { .demod_address = 0x68, .min_delay_ms = 100, @@ -627,7 +626,7 @@ static int __devinit frontend_init(struct dm1105dvb *dm1105dvb) dvb_attach(dvb_pll_attach, dm1105dvb->fe, 0x60, &dm1105dvb->i2c_adap, DVB_PLL_OPERA1); } -#if 0 + if (!dm1105dvb->fe) { dm1105dvb->fe = dvb_attach( stv0288_attach, &earda_config, @@ -639,7 +638,7 @@ static int __devinit frontend_init(struct dm1105dvb *dm1105dvb) &dm1105dvb->i2c_adap); } } -#endif /* keep */ + if (!dm1105dvb->fe) { dm1105dvb->fe = dvb_attach( si21xx_attach, &serit_config, diff --git a/drivers/media/dvb/frontends/Kconfig b/drivers/media/dvb/frontends/Kconfig index 7697391..96b93e2 100644 --- a/drivers/media/dvb/frontends/Kconfig +++ b/drivers/media/dvb/frontends/Kconfig @@ -43,6 +43,20 @@ config DVB_S5H1420 help A DVB-S tuner module. Say Y when you want to support this frontend. +config DVB_STV0288 + tristate "ST STV0288 based" + depends on DVB_CORE && I2C + default m if DVB_FE_CUSTOMISE + help + A DVB-S tuner module. Say Y when you want to support this frontend. + +config DVB_STB6000 + tristate "ST STB6000 silicon tuner" + depends on DVB_CORE && I2C + default m if DVB_FE_CUSTOMISE + help + A DVB-S silicon tuner module. Say Y when you want to support this tuner. + config DVB_STV0299 tristate "ST STV0299 based" depends on DVB_CORE && I2C diff --git a/drivers/media/dvb/frontends/Makefile b/drivers/media/dvb/frontends/Makefile index c719b7f..491eb5c 100644 --- a/drivers/media/dvb/frontends/Makefile +++ b/drivers/media/dvb/frontends/Makefile @@ -53,3 +53,5 @@ obj-$(CONFIG_DVB_DUMMY_FE) += dvb_dummy_fe.o obj-$(CONFIG_DVB_AF9013) += af9013.o obj-$(CONFIG_DVB_CX24116) += cx24116.o obj-$(CONFIG_DVB_SI21XX) += si21xx.o +obj-$(CONFIG_DVB_STV0299) += stv0288.o +obj-$(CONFIG_DVB_STB6000) += stb6000.o diff --git a/drivers/media/dvb/frontends/stb6000.c b/drivers/media/dvb/frontends/stb6000.c new file mode 100644 index 0000000..7d65123 --- /dev/null +++ b/drivers/media/dvb/frontends/stb6000.c @@ -0,0 +1,254 @@ + /* + Driver for ST STB6000 DVBS Silicon tuner + + Copyright (C) 2008 Igor M. Liplianin (liplianin@me.by) + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + + */ + +#include +#include +#include + +#include "stb6000.h" + +static int debug; +#define dprintk(args...) \ + do { \ + if (debug) \ + printk(KERN_DEBUG "stb6000: " args); \ + } while (0) + +struct stb6000_priv { + /* i2c details */ + int i2c_address; + struct i2c_adapter *i2c; + u32 frequency; +}; + +static int stb6000_release(struct dvb_frontend *fe) +{ + kfree(fe->tuner_priv); + fe->tuner_priv = NULL; + return 0; +} + +static int stb6000_sleep(struct dvb_frontend *fe) +{ + struct stb6000_priv *priv = fe->tuner_priv; + int ret; + u8 buf[] = { 10, 0 }; + struct i2c_msg msg = { + .addr = priv->i2c_address, + .flags = 0, + .buf = buf, + .len = 2 + }; + + dprintk("%s:\n", __func__); + + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 1); + + ret = i2c_transfer(priv->i2c, &msg, 1); + if (ret != 1) + dprintk("%s: i2c error\n", __func__); + + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 0); + + return (ret == 1) ? 0 : ret; +} + +static int stb6000_set_params(struct dvb_frontend *fe, + struct dvb_frontend_parameters *params) +{ + struct stb6000_priv *priv = fe->tuner_priv; + unsigned int n, m; + int ret; + u32 freq_mhz; + int bandwidth; + u8 buf[12]; + struct i2c_msg msg = { + .addr = priv->i2c_address, + .flags = 0, + .buf = buf, + .len = 12 + }; + + dprintk("%s:\n", __func__); + + freq_mhz = params->frequency / 1000; + bandwidth = params->u.qpsk.symbol_rate / 1000000; + + if (bandwidth > 31) + bandwidth = 31; + + if ((freq_mhz > 949) && (freq_mhz < 2151)) { + buf[0] = 0x01; + buf[1] = 0xac; + if (freq_mhz < 1950) + buf[1] = 0xaa; + if (freq_mhz < 1800) + buf[1] = 0xa8; + if (freq_mhz < 1650) + buf[1] = 0xa6; + if (freq_mhz < 1530) + buf[1] = 0xa5; + if (freq_mhz < 1470) + buf[1] = 0xa4; + if (freq_mhz < 1370) + buf[1] = 0xa2; + if (freq_mhz < 1300) + buf[1] = 0xa1; + if (freq_mhz < 1200) + buf[1] = 0xa0; + if (freq_mhz < 1075) + buf[1] = 0xbc; + if (freq_mhz < 1000) + buf[1] = 0xba; + if (freq_mhz < 1075) { + n = freq_mhz / 8; /* vco=lo*4 */ + m = 2; + } else { + n = freq_mhz / 16; /* vco=lo*2 */ + m = 1; + } + buf[2] = n >> 1; + buf[3] = (unsigned char)(((n & 1) << 7) | + (m * freq_mhz - n * 16) | 0x60); + buf[4] = 0x04; + buf[5] = 0x0e; + + buf[6] = (unsigned char)(bandwidth); + + buf[7] = 0xd8; + buf[8] = 0xd0; + buf[9] = 0x50; + buf[10] = 0xeb; + buf[11] = 0x4f; + + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 1); + + ret = i2c_transfer(priv->i2c, &msg, 1); + if (ret != 1) + dprintk("%s: i2c error\n", __func__); + + udelay(10); + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 0); + + buf[0] = 0x07; + buf[1] = 0xdf; + buf[2] = 0xd0; + buf[3] = 0x50; + buf[4] = 0xfb; + msg.len = 5; + + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 1); + + ret = i2c_transfer(priv->i2c, &msg, 1); + if (ret != 1) + dprintk("%s: i2c error\n", __func__); + + udelay(10); + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 0); + + priv->frequency = freq_mhz * 1000; + + return (ret == 1) ? 0 : ret; + } + return -1; +} + +static int stb6000_get_frequency(struct dvb_frontend *fe, u32 *frequency) +{ + struct stb6000_priv *priv = fe->tuner_priv; + *frequency = priv->frequency; + return 0; +} + +static struct dvb_tuner_ops stb6000_tuner_ops = { + .info = { + .name = "ST STB6000", + .frequency_min = 950000, + .frequency_max = 2150000 + }, + .release = stb6000_release, + .sleep = stb6000_sleep, + .set_params = stb6000_set_params, + .get_frequency = stb6000_get_frequency, +}; + +struct dvb_frontend *stb6000_attach(struct dvb_frontend *fe, int addr, + struct i2c_adapter *i2c) +{ + struct stb6000_priv *priv = NULL; + u8 b1[] = { 0, 0 }; + struct i2c_msg msg[2] = { + { + .addr = addr, + .flags = 0, + .buf = NULL, + .len = 0 + }, { + .addr = addr, + .flags = I2C_M_RD, + .buf = b1, + .len = 2 + } + }; + int ret; + + dprintk("%s:\n", __func__); + + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 1); + + /* is some i2c device here ? */ + ret = i2c_transfer(i2c, msg, 2); + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 0); + + if (ret != 2) + return NULL; + + priv = kzalloc(sizeof(struct stb6000_priv), GFP_KERNEL); + if (priv == NULL) + return NULL; + + priv->i2c_address = addr; + priv->i2c = i2c; + + memcpy(&fe->ops.tuner_ops, &stb6000_tuner_ops, + sizeof(struct dvb_tuner_ops)); + + fe->tuner_priv = priv; + + return fe; +} +EXPORT_SYMBOL(stb6000_attach); + +module_param(debug, int, 0644); +MODULE_PARM_DESC(debug, "Turn on/off frontend debugging (default:off)."); + +MODULE_DESCRIPTION("DVB STB6000 driver"); +MODULE_AUTHOR("Igor M. Liplianin "); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/dvb/frontends/stb6000.h b/drivers/media/dvb/frontends/stb6000.h new file mode 100644 index 0000000..7be479c --- /dev/null +++ b/drivers/media/dvb/frontends/stb6000.h @@ -0,0 +1,51 @@ + /* + Driver for ST stb6000 DVBS Silicon tuner + + Copyright (C) 2008 Igor M. Liplianin (liplianin@me.by) + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + + */ + +#ifndef __DVB_STB6000_H__ +#define __DVB_STB6000_H__ + +#include +#include "dvb_frontend.h" + +/** + * Attach a stb6000 tuner to the supplied frontend structure. + * + * @param fe Frontend to attach to. + * @param addr i2c address of the tuner. + * @param i2c i2c adapter to use. + * @return FE pointer on success, NULL on failure. + */ +#if defined(CONFIG_DVB_STB6000) || (defined(CONFIG_DVB_STB6000_MODULE) \ + && defined(MODULE)) +extern struct dvb_frontend *stb6000_attach(struct dvb_frontend *fe, int addr, + struct i2c_adapter *i2c); +#else +static inline struct dvb_frontend *stb6000_attach(struct dvb_frontend *fe, + int addr, + struct i2c_adapter *i2c) +{ + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); + return NULL; +} +#endif /* CONFIG_DVB_STB6000 */ + +#endif /* __DVB_STB6000_H__ */ diff --git a/drivers/media/dvb/frontends/stv0288.c b/drivers/media/dvb/frontends/stv0288.c new file mode 100644 index 0000000..90e72e7 --- /dev/null +++ b/drivers/media/dvb/frontends/stv0288.c @@ -0,0 +1,606 @@ +/* + Driver for ST STV0288 demodulator + Copyright (C) 2006 Georg Acher, BayCom GmbH, acher (at) baycom (dot) de + for Reel Multimedia + Copyright (C) 2008 TurboSight.com, Bob Liu + Copyright (C) 2008 Igor M. Liplianin + Removed stb6000 specific tuner code and revised some + procedures. + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + +*/ + +#include +#include +#include +#include +#include +#include +#include + +#include "dvb_frontend.h" +#include "stv0288.h" + +struct stv0288_state { + struct i2c_adapter *i2c; + const struct stv0288_config *config; + struct dvb_frontend frontend; + + u8 initialised:1; + u32 tuner_frequency; + u32 symbol_rate; + fe_code_rate_t fec_inner; + int errmode; +}; + +#define STATUS_BER 0 +#define STATUS_UCBLOCKS 1 + +static int debug; +static int debug_legacy_dish_switch; +#define dprintk(args...) \ + do { \ + if (debug) \ + printk(KERN_DEBUG "stv0288: " args); \ + } while (0) + + +static int stv0288_writeregI(struct stv0288_state *state, u8 reg, u8 data) +{ + int ret; + u8 buf[] = { reg, data }; + struct i2c_msg msg = { + .addr = state->config->demod_address, + .flags = 0, + .buf = buf, + .len = 2 + }; + + ret = i2c_transfer(state->i2c, &msg, 1); + + if (ret != 1) + dprintk("%s: writereg error (reg == 0x%02x, val == 0x%02x, " + "ret == %i)\n", __func__, reg, data, ret); + + return (ret != 1) ? -EREMOTEIO : 0; +} + +static int stv0288_write(struct dvb_frontend *fe, u8 *buf, int len) +{ + struct stv0288_state *state = fe->demodulator_priv; + + if (len != 2) + return -EINVAL; + + return stv0288_writeregI(state, buf[0], buf[1]); +} + +static u8 stv0288_readreg(struct stv0288_state *state, u8 reg) +{ + int ret; + u8 b0[] = { reg }; + u8 b1[] = { 0 }; + struct i2c_msg msg[] = { + { + .addr = state->config->demod_address, + .flags = 0, + .buf = b0, + .len = 1 + }, { + .addr = state->config->demod_address, + .flags = I2C_M_RD, + .buf = b1, + .len = 1 + } + }; + + ret = i2c_transfer(state->i2c, msg, 2); + + if (ret != 2) + dprintk("%s: readreg error (reg == 0x%02x, ret == %i)\n", + __func__, reg, ret); + + return b1[0]; +} + +static int stv0288_set_symbolrate(struct dvb_frontend *fe, u32 srate) +{ + struct stv0288_state *state = fe->demodulator_priv; + unsigned int temp; + unsigned char b[3]; + + if ((srate < 1000000) || (srate > 45000000)) + return -EINVAL; + + temp = (unsigned int)srate / 1000; + + temp = temp * 32768; + temp = temp / 25; + temp = temp / 125; + b[0] = (unsigned char)((temp >> 12) & 0xff); + b[1] = (unsigned char)((temp >> 4) & 0xff); + b[2] = (unsigned char)((temp << 4) & 0xf0); + stv0288_writeregI(state, 0x28, 0x80); /* SFRH */ + stv0288_writeregI(state, 0x29, 0); /* SFRM */ + stv0288_writeregI(state, 0x2a, 0); /* SFRL */ + + stv0288_writeregI(state, 0x28, b[0]); + stv0288_writeregI(state, 0x29, b[1]); + stv0288_writeregI(state, 0x2a, b[2]); + dprintk("stv0288: stv0288_set_symbolrate\n"); + + return 0; +} + +static int stv0288_send_diseqc_msg(struct dvb_frontend *fe, + struct dvb_diseqc_master_cmd *m) +{ + struct stv0288_state *state = fe->demodulator_priv; + + int i; + + dprintk("%s\n", __func__); + + stv0288_writeregI(state, 0x09, 0); + msleep(30); + stv0288_writeregI(state, 0x05, 0x16); + + for (i = 0; i < m->msg_len; i++) { + if (stv0288_writeregI(state, 0x06, m->msg[i])) + return -EREMOTEIO; + msleep(12); + } + + return 0; +} + +static int stv0288_send_diseqc_burst(struct dvb_frontend *fe, + fe_sec_mini_cmd_t burst) +{ + struct stv0288_state *state = fe->demodulator_priv; + + dprintk("%s\n", __func__); + + if (stv0288_writeregI(state, 0x05, 0x16))/* burst mode */ + return -EREMOTEIO; + + if (stv0288_writeregI(state, 0x06, burst == SEC_MINI_A ? 0x00 : 0xff)) + return -EREMOTEIO; + + if (stv0288_writeregI(state, 0x06, 0x12)) + return -EREMOTEIO; + + return 0; +} + +static int stv0288_set_tone(struct dvb_frontend *fe, fe_sec_tone_mode_t tone) +{ + struct stv0288_state *state = fe->demodulator_priv; + + switch (tone) { + case SEC_TONE_ON: + if (stv0288_writeregI(state, 0x05, 0x10))/* burst mode */ + return -EREMOTEIO; + return stv0288_writeregI(state, 0x06, 0xff); + + case SEC_TONE_OFF: + if (stv0288_writeregI(state, 0x05, 0x13))/* burst mode */ + return -EREMOTEIO; + return stv0288_writeregI(state, 0x06, 0x00); + + default: + return -EINVAL; + } +} + +static u8 stv0288_inittab[] = { + 0x01, 0x15, + 0x02, 0x20, + 0x09, 0x0, + 0x0a, 0x4, + 0x0b, 0x0, + 0x0c, 0x0, + 0x0d, 0x0, + 0x0e, 0xd4, + 0x0f, 0x30, + 0x11, 0x80, + 0x12, 0x03, + 0x13, 0x48, + 0x14, 0x84, + 0x15, 0x45, + 0x16, 0xb7, + 0x17, 0x9c, + 0x18, 0x0, + 0x19, 0xa6, + 0x1a, 0x88, + 0x1b, 0x8f, + 0x1c, 0xf0, + 0x20, 0x0b, + 0x21, 0x54, + 0x22, 0x0, + 0x23, 0x0, + 0x2b, 0xff, + 0x2c, 0xf7, + 0x30, 0x0, + 0x31, 0x1e, + 0x32, 0x14, + 0x33, 0x0f, + 0x34, 0x09, + 0x35, 0x0c, + 0x36, 0x05, + 0x37, 0x2f, + 0x38, 0x16, + 0x39, 0xbe, + 0x3a, 0x0, + 0x3b, 0x13, + 0x3c, 0x11, + 0x3d, 0x30, + 0x40, 0x63, + 0x41, 0x04, + 0x42, 0x60, + 0x43, 0x00, + 0x44, 0x00, + 0x45, 0x00, + 0x46, 0x00, + 0x47, 0x00, + 0x4a, 0x00, + 0x50, 0x10, + 0x51, 0x38, + 0x52, 0x21, + 0x58, 0x54, + 0x59, 0x86, + 0x5a, 0x0, + 0x5b, 0x9b, + 0x5c, 0x08, + 0x5d, 0x7f, + 0x5e, 0x0, + 0x5f, 0xff, + 0x70, 0x0, + 0x71, 0x0, + 0x72, 0x0, + 0x74, 0x0, + 0x75, 0x0, + 0x76, 0x0, + 0x81, 0x0, + 0x82, 0x3f, + 0x83, 0x3f, + 0x84, 0x0, + 0x85, 0x0, + 0x88, 0x0, + 0x89, 0x0, + 0x8a, 0x0, + 0x8b, 0x0, + 0x8c, 0x0, + 0x90, 0x0, + 0x91, 0x0, + 0x92, 0x0, + 0x93, 0x0, + 0x94, 0x1c, + 0x97, 0x0, + 0xa0, 0x48, + 0xa1, 0x0, + 0xb0, 0xb8, + 0xb1, 0x3a, + 0xb2, 0x10, + 0xb3, 0x82, + 0xb4, 0x80, + 0xb5, 0x82, + 0xb6, 0x82, + 0xb7, 0x82, + 0xb8, 0x20, + 0xb9, 0x0, + 0xf0, 0x0, + 0xf1, 0x0, + 0xf2, 0xc0, + 0x51, 0x36, + 0x52, 0x09, + 0x53, 0x94, + 0x54, 0x62, + 0x55, 0x29, + 0x56, 0x64, + 0x57, 0x2b, + 0xff, 0xff, +}; + +static int stv0288_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t volt) +{ + dprintk("%s: %s\n", __func__, + volt == SEC_VOLTAGE_13 ? "SEC_VOLTAGE_13" : + volt == SEC_VOLTAGE_18 ? "SEC_VOLTAGE_18" : "??"); + + return 0; +} + +static int stv0288_init(struct dvb_frontend *fe) +{ + struct stv0288_state *state = fe->demodulator_priv; + int i; + + dprintk("stv0288: init chip\n"); + stv0288_writeregI(state, 0x41, 0x04); + msleep(50); + + for (i = 0; !(stv0288_inittab[i] == 0xff && + stv0288_inittab[i + 1] == 0xff); i += 2) + stv0288_writeregI(state, stv0288_inittab[i], + stv0288_inittab[i + 1]); + + return 0; +} + +static int stv0288_read_status(struct dvb_frontend *fe, fe_status_t *status) +{ + struct stv0288_state *state = fe->demodulator_priv; + + u8 sync = stv0288_readreg(state, 0x24); + if (sync == 255) + sync = 0; + + dprintk("%s : FE_READ_STATUS : VSTATUS: 0x%02x\n", __func__, sync); + + *status = 0; + + if ((sync & 0x08) == 0x08) { + *status |= FE_HAS_LOCK; + dprintk("stv0288 has locked\n"); + } + + return 0; +} + +static int stv0288_read_ber(struct dvb_frontend *fe, u32 *ber) +{ + struct stv0288_state *state = fe->demodulator_priv; + + if (state->errmode != STATUS_BER) + return 0; + *ber = (stv0288_readreg(state, 0x26) << 8) | + stv0288_readreg(state, 0x27); + dprintk("stv0288_read_ber %d\n", *ber); + + return 0; +} + + +static int stv0288_read_signal_strength(struct dvb_frontend *fe, u16 *strength) +{ + struct stv0288_state *state = fe->demodulator_priv; + + s32 signal = 0xffff - ((stv0288_readreg(state, 0x10) << 8)); + + + signal = signal * 5 / 4; + *strength = (signal > 0xffff) ? 0xffff : (signal < 0) ? 0 : signal; + dprintk("stv0288_read_signal_strength %d\n", *strength); + + return 0; +} +static int stv0288_sleep(struct dvb_frontend *fe) +{ + struct stv0288_state *state = fe->demodulator_priv; + + stv0288_writeregI(state, 0x41, 0x84); + state->initialised = 0; + + return 0; +} +static int stv0288_read_snr(struct dvb_frontend *fe, u16 *snr) +{ + struct stv0288_state *state = fe->demodulator_priv; + + s32 xsnr = 0xffff - ((stv0288_readreg(state, 0x2d) << 8) + | stv0288_readreg(state, 0x2e)); + xsnr = 3 * (xsnr - 0xa100); + *snr = (xsnr > 0xffff) ? 0xffff : (xsnr < 0) ? 0 : xsnr; + dprintk("stv0288_read_snr %d\n", *snr); + + return 0; +} + +static int stv0288_read_ucblocks(struct dvb_frontend *fe, u32 *ucblocks) +{ + struct stv0288_state *state = fe->demodulator_priv; + + if (state->errmode != STATUS_BER) + return 0; + *ucblocks = (stv0288_readreg(state, 0x26) << 8) | + stv0288_readreg(state, 0x27); + dprintk("stv0288_read_ber %d\n", *ucblocks); + + return 0; +} + +static int stv0288_set_property(struct dvb_frontend *fe, struct dtv_property *p) +{ + dprintk("%s(..)\n", __func__); + return 0; +} + +static int stv0288_get_property(struct dvb_frontend *fe, struct dtv_property *p) +{ + dprintk("%s(..)\n", __func__); + return 0; +} + +static int stv0288_set_frontend(struct dvb_frontend *fe, + struct dvb_frontend_parameters *dfp) +{ + struct stv0288_state *state = fe->demodulator_priv; + struct dtv_frontend_properties *c = &fe->dtv_property_cache; + + char tm; + unsigned char tda[3]; + + dprintk("%s : FE_SET_FRONTEND\n", __func__); + + if (c->delivery_system != SYS_DVBS) { + dprintk("%s: unsupported delivery " + "system selected (%d)\n", + __func__, c->delivery_system); + return -EOPNOTSUPP; + } + + if (state->config->set_ts_params) + state->config->set_ts_params(fe, 0); + + /* only frequency & symbol_rate are used for tuner*/ + dfp->frequency = c->frequency; + dfp->u.qpsk.symbol_rate = c->symbol_rate; + if (fe->ops.tuner_ops.set_params) { + fe->ops.tuner_ops.set_params(fe, dfp); + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 0); + } + + udelay(10); + stv0288_set_symbolrate(fe, c->symbol_rate); + /* Carrier lock control register */ + stv0288_writeregI(state, 0x15, 0xc5); + + tda[0] = 0x2b; /* CFRM */ + tda[2] = 0x0; /* CFRL */ + for (tm = -6; tm < 7;) { + /* Viterbi status */ + if (stv0288_readreg(state, 0x24) & 0x80) + break; + + tda[2] += 40; + if (tda[2] < 40) + tm++; + tda[1] = (unsigned char)tm; + stv0288_writeregI(state, 0x2b, tda[1]); + stv0288_writeregI(state, 0x2c, tda[2]); + udelay(30); + } + + state->tuner_frequency = c->frequency; + state->fec_inner = FEC_AUTO; + state->symbol_rate = c->symbol_rate; + + return 0; +} + +static int stv0288_i2c_gate_ctrl(struct dvb_frontend *fe, int enable) +{ + struct stv0288_state *state = fe->demodulator_priv; + + if (enable) + stv0288_writeregI(state, 0x01, 0xb5); + else + stv0288_writeregI(state, 0x01, 0x35); + + udelay(1); + + return 0; +} + +static void stv0288_release(struct dvb_frontend *fe) +{ + struct stv0288_state *state = fe->demodulator_priv; + kfree(state); +} + +static struct dvb_frontend_ops stv0288_ops = { + + .info = { + .name = "ST STV0288 DVB-S", + .type = FE_QPSK, + .frequency_min = 950000, + .frequency_max = 2150000, + .frequency_stepsize = 1000, /* kHz for QPSK frontends */ + .frequency_tolerance = 0, + .symbol_rate_min = 1000000, + .symbol_rate_max = 45000000, + .symbol_rate_tolerance = 500, /* ppm */ + .caps = FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 | + FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 | + FE_CAN_QPSK | + FE_CAN_FEC_AUTO + }, + + .release = stv0288_release, + .init = stv0288_init, + .sleep = stv0288_sleep, + .write = stv0288_write, + .i2c_gate_ctrl = stv0288_i2c_gate_ctrl, + .read_status = stv0288_read_status, + .read_ber = stv0288_read_ber, + .read_signal_strength = stv0288_read_signal_strength, + .read_snr = stv0288_read_snr, + .read_ucblocks = stv0288_read_ucblocks, + .diseqc_send_master_cmd = stv0288_send_diseqc_msg, + .diseqc_send_burst = stv0288_send_diseqc_burst, + .set_tone = stv0288_set_tone, + .set_voltage = stv0288_set_voltage, + + .set_property = stv0288_set_property, + .get_property = stv0288_get_property, + .set_frontend = stv0288_set_frontend, +}; + +struct dvb_frontend *stv0288_attach(const struct stv0288_config *config, + struct i2c_adapter *i2c) +{ + struct stv0288_state *state = NULL; + int id; + + /* allocate memory for the internal state */ + state = kmalloc(sizeof(struct stv0288_state), GFP_KERNEL); + if (state == NULL) + goto error; + + /* setup the state */ + state->config = config; + state->i2c = i2c; + state->initialised = 0; + state->tuner_frequency = 0; + state->symbol_rate = 0; + state->fec_inner = 0; + state->errmode = STATUS_BER; + + stv0288_writeregI(state, 0x41, 0x04); + msleep(200); + id = stv0288_readreg(state, 0x00); + dprintk("stv0288 id %x\n", id); + + /* register 0x00 contains 0x11 for STV0288 */ + if (id != 0x11) + goto error; + + /* create dvb_frontend */ + memcpy(&state->frontend.ops, &stv0288_ops, + sizeof(struct dvb_frontend_ops)); + state->frontend.demodulator_priv = state; + return &state->frontend; + +error: + kfree(state); + + return NULL; +} +EXPORT_SYMBOL(stv0288_attach); + +module_param(debug_legacy_dish_switch, int, 0444); +MODULE_PARM_DESC(debug_legacy_dish_switch, + "Enable timing analysis for Dish Network legacy switches"); + +module_param(debug, int, 0644); +MODULE_PARM_DESC(debug, "Turn on/off frontend debugging (default:off)."); + +MODULE_DESCRIPTION("ST STV0288 DVB Demodulator driver"); +MODULE_AUTHOR("Georg Acher, Bob Liu, Igor liplianin"); +MODULE_LICENSE("GPL"); + diff --git a/drivers/media/dvb/frontends/stv0288.h b/drivers/media/dvb/frontends/stv0288.h new file mode 100644 index 0000000..aa0cdd2 --- /dev/null +++ b/drivers/media/dvb/frontends/stv0288.h @@ -0,0 +1,65 @@ +/* + Driver for ST STV0288 demodulator + + Copyright (C) 2006 Georg Acher, BayCom GmbH, acher (at) baycom (dot) de + for Reel Multimedia + Copyright (C) 2008 TurboSight.com, + Copyright (C) 2008 Igor M. Liplianin + Removed stb6000 specific tuner code and revised some + procedures. + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + +*/ + +#ifndef STV0288_H +#define STV0288_H + +#include +#include "dvb_frontend.h" + +struct stv0288_config { + /* the demodulator's i2c address */ + u8 demod_address; + + /* minimum delay before retuning */ + int min_delay_ms; + + int (*set_ts_params)(struct dvb_frontend *fe, int is_punctured); +}; + +#if defined(CONFIG_DVB_STV0288) || (defined(CONFIG_DVB_STV0288_MODULE) && \ + defined(MODULE)) +extern struct dvb_frontend *stv0288_attach(const struct stv0288_config *config, + struct i2c_adapter *i2c); +#else +static inline struct dvb_frontend *stv0288_attach(const struct stv0288_config *config, + struct i2c_adapter *i2c) +{ + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); + return NULL; +} +#endif /* CONFIG_DVB_STV0288 */ + +static inline int stv0288_writereg(struct dvb_frontend *fe, u8 reg, u8 val) +{ + int r = 0; + u8 buf[] = { reg, val }; + if (fe->ops.write) + r = fe->ops.write(fe, buf, 2); + return r; +} + +#endif /* STV0288_H */ diff --git a/drivers/media/dvb/frontends/stv0299.c b/drivers/media/dvb/frontends/stv0299.c index 35435be..6c1cb19 100644 --- a/drivers/media/dvb/frontends/stv0299.c +++ b/drivers/media/dvb/frontends/stv0299.c @@ -559,6 +559,8 @@ static int stv0299_set_frontend(struct dvb_frontend* fe, struct dvb_frontend_par int invval = 0; dprintk ("%s : FE_SET_FRONTEND\n", __func__); + if (state->config->set_ts_params) + state->config->set_ts_params(fe, 0); // set the inversion if (p->inversion == INVERSION_OFF) invval = 0; diff --git a/drivers/media/dvb/frontends/stv0299.h b/drivers/media/dvb/frontends/stv0299.h index 3282f43..0fd96e2 100644 --- a/drivers/media/dvb/frontends/stv0299.h +++ b/drivers/media/dvb/frontends/stv0299.h @@ -89,15 +89,18 @@ struct stv0299_config int min_delay_ms; /* Set the symbol rate */ - int (*set_symbol_rate)(struct dvb_frontend* fe, u32 srate, u32 ratio); + int (*set_symbol_rate)(struct dvb_frontend *fe, u32 srate, u32 ratio); + + /* Set device param to start dma */ + int (*set_ts_params)(struct dvb_frontend *fe, int is_punctured); }; #if defined(CONFIG_DVB_STV0299) || (defined(CONFIG_DVB_STV0299_MODULE) && defined(MODULE)) -extern struct dvb_frontend* stv0299_attach(const struct stv0299_config* config, - struct i2c_adapter* i2c); +extern struct dvb_frontend *stv0299_attach(const struct stv0299_config *config, + struct i2c_adapter *i2c); #else -static inline struct dvb_frontend* stv0299_attach(const struct stv0299_config* config, - struct i2c_adapter* i2c) +static inline struct dvb_frontend *stv0299_attach(const struct stv0299_config *config, + struct i2c_adapter *i2c) { printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); return NULL; diff --git a/drivers/media/video/cx88/Kconfig b/drivers/media/video/cx88/Kconfig index 4f65ce3..0b9e5fa 100644 --- a/drivers/media/video/cx88/Kconfig +++ b/drivers/media/video/cx88/Kconfig @@ -59,6 +59,9 @@ config VIDEO_CX88_DVB select MEDIA_TUNER_SIMPLE if !DVB_FE_CUSTOMISE select DVB_S5H1411 if !DVB_FE_CUSTOMISE select DVB_CX24116 if !DVB_FE_CUSTOMISE + select DVB_STV0299 if !DVB_FE_CUSTOMISE + select DVB_STV0288 if !DVB_FE_CUSTOMISE + select DVB_STB6000 if !DVB_FE_CUSTOMISE ---help--- This adds support for DVB/ATSC cards based on the Conexant 2388x chip. diff --git a/drivers/media/video/cx88/cx88-cards.c b/drivers/media/video/cx88/cx88-cards.c index 0203c75..16bb9c3 100644 --- a/drivers/media/video/cx88/cx88-cards.c +++ b/drivers/media/video/cx88/cx88-cards.c @@ -1732,6 +1732,18 @@ static const struct cx88_board cx88_boards[] = { } }, .mpeg = CX88_MPEG_DVB, }, + [CX88_BOARD_TEVII_S420] = { + .name = "TeVii S420 DVB-S", + .tuner_type = UNSET, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .input = {{ + .type = CX88_VMUX_DVB, + .vmux = 0, + } }, + .mpeg = CX88_MPEG_DVB, + }, [CX88_BOARD_TEVII_S460] = { .name = "TeVii S460 DVB-S/S2", .tuner_type = UNSET, @@ -2138,7 +2150,11 @@ static const struct cx88_subid cx88_subids[] = { .subdevice = 0x6906, .card = CX88_BOARD_HAUPPAUGE_HVR4000LITE, }, { - .subvendor = 0xD460, + .subvendor = 0xd420, + .subdevice = 0x9022, + .card = CX88_BOARD_TEVII_S420, + }, { + .subvendor = 0xd460, .subdevice = 0x9022, .card = CX88_BOARD_TEVII_S460, }, { @@ -2730,6 +2746,7 @@ static void cx88_card_setup(struct cx88_core *core) cx88_call_i2c_clients(core, TUNER_SET_CONFIG, &tea5767_cfg); break; } + case CX88_BOARD_TEVII_S420: case CX88_BOARD_TEVII_S460: cx_write(MO_SRST_IO, 0); msleep(100); diff --git a/drivers/media/video/cx88/cx88-dvb.c b/drivers/media/video/cx88/cx88-dvb.c index a6c4f66..cd368b5 100644 --- a/drivers/media/video/cx88/cx88-dvb.c +++ b/drivers/media/video/cx88/cx88-dvb.c @@ -48,6 +48,10 @@ #include "tuner-simple.h" #include "tda9887.h" #include "s5h1411.h" +#include "stv0299.h" +#include "z0194a.h" +#include "stv0288.h" +#include "stb6000.h" #include "cx24116.h" MODULE_DESCRIPTION("driver for cx2388x based DVB cards"); @@ -579,6 +583,25 @@ static struct cx24116_config tevii_s460_config = { .reset_device = cx24116_reset_device, }; +static struct stv0299_config tevii_tuner_sharp_config = { + .demod_address = 0x68, + .inittab = sharp_z0194a__inittab, + .mclk = 88000000UL, + .invert = 1, + .skip_reinit = 0, + .lock_output = 1, + .volt13_op0_op1 = STV0299_VOLT13_OP1, + .min_delay_ms = 100, + .set_symbol_rate = sharp_z0194a__set_symbol_rate, + .set_ts_params = cx24116_set_ts_param, +}; + +static struct stv0288_config tevii_tuner_earda_config = { + .demod_address = 0x68, + .min_delay_ms = 100, + .set_ts_params = cx24116_set_ts_param, +}; + static int dvb_register(struct cx8802_dev *dev) { struct cx88_core *core = dev->core; @@ -949,6 +972,31 @@ static int dvb_register(struct cx8802_dev *dev) 0x08, ISL6421_DCL, 0x00); } break; + case CX88_BOARD_TEVII_S420: + dev->dvb.frontend = dvb_attach(stv0299_attach, + &tevii_tuner_sharp_config, + &core->i2c_adap); + if (dev->dvb.frontend != NULL) { + if (!dvb_attach(dvb_pll_attach, dev->dvb.frontend, 0x60, + &core->i2c_adap, DVB_PLL_OPERA1)) + goto frontend_detach; + core->prev_set_voltage = dev->dvb.frontend->ops.set_voltage; + dev->dvb.frontend->ops.set_voltage = tevii_dvbs_set_voltage; + + } else { + dev->dvb.frontend = dvb_attach(stv0288_attach, + &tevii_tuner_earda_config, + &core->i2c_adap); + if (dev->dvb.frontend != NULL) { + if (!dvb_attach(stb6000_attach, dev->dvb.frontend, 0x61, + &core->i2c_adap)) + goto frontend_detach; + core->prev_set_voltage = dev->dvb.frontend->ops.set_voltage; + dev->dvb.frontend->ops.set_voltage = tevii_dvbs_set_voltage; + + } + } + break; case CX88_BOARD_TEVII_S460: dev->dvb.frontend = dvb_attach(cx24116_attach, &tevii_s460_config, diff --git a/drivers/media/video/cx88/cx88.h b/drivers/media/video/cx88/cx88.h index fa3a725..e17bd51 100644 --- a/drivers/media/video/cx88/cx88.h +++ b/drivers/media/video/cx88/cx88.h @@ -226,6 +226,7 @@ extern struct sram_channel cx88_sram_channels[]; #define CX88_BOARD_TEVII_S460 70 #define CX88_BOARD_OMICOM_SS4_PCI 71 #define CX88_BOARD_TBS_8920 72 +#define CX88_BOARD_TEVII_S420 73 enum cx88_itype { CX88_VMUX_COMPOSITE1 = 1, -- cgit v0.10.2 From 301e9d64e0bb00c557d9385474cc9d79db0485d9 Mon Sep 17 00:00:00 2001 From: hermann pitton Date: Sun, 14 Sep 2008 17:49:14 -0300 Subject: V4L/DVB (9028): saa7134: add support for the triple Asus Tiger 3in1 after looking it up, all rants about the 80 columns restriction seem to be in vain. After changing the card's name it are now "only" seven new lines in the tiny DVB-T/DVB-S switch function. saa7130/34: v4l2 driver version 0.2.14 loaded saa7133[0]: found at 0000:02:08.0, rev: 209, irq: 18, latency: 32, mmio: 0xfdef7000 saa7133[0]: subsystem: 1043:4878, board: Asus Tiger 3in1 [card=147,autodetected] saa7133[0]: board init: gpio is 200000 tuner' 2-004b: chip found @ 0x96 (saa7133[0]) saa7133[0]: i2c eeprom 00: 43 10 78 48 54 20 1c 00 43 43 a9 1c 55 d2 b2 92 saa7133[0]: i2c eeprom 10: ff ff ff 0f ff 20 ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom 20: 01 40 01 02 03 01 01 03 08 ff 00 d7 ff ff ff ff saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom 40: ff 28 00 c2 96 16 03 02 c0 1c ff ff ff ff ff ff saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c scan: found device @ 0x10 [???] saa7133[0]: i2c scan: found device @ 0x16 [???] saa7133[0]: i2c scan: found device @ 0x1c [???] saa7133[0]: i2c scan: found device @ 0x96 [???] saa7133[0]: i2c scan: found device @ 0xa0 [eeprom] tda829x 2-004b: setting tuner address to 61 tda829x 2-004b: type set to tda8290+75a saa7133[0]: registered device video0 [v4l2] saa7133[0]: registered device vbi0 saa7133[0]: registered device radio0 DVB: registering new adapter (saa7133[0]) DVB: registering frontend 0 (Philips TDA10086 DVB-S)... The board init gpio is 0x0, 0x200000 is from previously unloading with antenna_switch = 1. It needs firmware for the tda10046 and analog sound needs saa7134-alsa. I have support for one more board and need to fix the first revision of the Asus Tiger DVB-T hybrid. DVB-T currently hangs on the male radio antenna input, also some small other stuff. Please report any issues with this patch, the next are depending on this one. saa7134: add support for the triple Asus Tiger 3in1 Signed-off-by: Hermann Pitton Signed-off-by: Mauro Carvalho Chehab diff --git a/Documentation/video4linux/CARDLIST.cx88 b/Documentation/video4linux/CARDLIST.cx88 index 8fea297..075650c 100644 --- a/Documentation/video4linux/CARDLIST.cx88 +++ b/Documentation/video4linux/CARDLIST.cx88 @@ -68,6 +68,7 @@ 67 -> Kworld PlusTV HD PCI 120 (ATSC 120) [17de:08c1] 68 -> Hauppauge WinTV-HVR4000 DVB-S/S2/T/Hybrid [0070:6900,0070:6904,0070:6902] 69 -> Hauppauge WinTV-HVR4000(Lite) DVB-S/S2 [0070:6905,0070:6906] - 70 -> TeVii S460 DVB-S/S2 [D460:9022] + 70 -> TeVii S460 DVB-S/S2 [d460:9022] 71 -> Omicom SS4 DVB-S/S2 PCI [A044:2011] 72 -> TBS 8920 DVB-S/S2 [8920:8888] + 73 -> TeVii S420 DVB-S [d420:9022] diff --git a/Documentation/video4linux/CARDLIST.saa7134 b/Documentation/video4linux/CARDLIST.saa7134 index 39868af..c121f44 100644 --- a/Documentation/video4linux/CARDLIST.saa7134 +++ b/Documentation/video4linux/CARDLIST.saa7134 @@ -145,3 +145,4 @@ 144 -> Beholder BeholdTV M6 Extra [5ace:6193] 145 -> AVerMedia MiniPCI DVB-T Hybrid M103 [1461:f636] 146 -> ASUSTeK P7131 Analog +147 -> Asus Tiger 3in1 [1043:4878] diff --git a/drivers/media/video/saa7134/saa7134-cards.c b/drivers/media/video/saa7134/saa7134-cards.c index 98364d1..3c2f09f 100644 --- a/drivers/media/video/saa7134/saa7134-cards.c +++ b/drivers/media/video/saa7134/saa7134-cards.c @@ -4409,6 +4409,36 @@ struct saa7134_board saa7134_boards[] = { /* no DVB support for now */ /* .mpeg = SAA7134_MPEG_DVB, */ }, + [SAA7134_BOARD_ASUSTeK_TIGER_3IN1] = { + .name = "Asus Tiger 3in1", + .audio_clock = 0x00187de7, + .tuner_type = TUNER_PHILIPS_TDA8290, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .tuner_config = 2, + .gpiomask = 1 << 21, + .mpeg = SAA7134_MPEG_DVB, + .inputs = {{ + .name = name_tv, + .vmux = 1, + .amux = TV, + .tv = 1, + }, { + .name = name_comp, + .vmux = 0, + .amux = LINE2, + }, { + .name = name_svideo, + .vmux = 8, + .amux = LINE2, + } }, + .radio = { + .name = name_radio, + .amux = TV, + .gpio = 0x0200000, + }, + }, }; const unsigned int saa7134_bcount = ARRAY_SIZE(saa7134_boards); @@ -5432,6 +5462,12 @@ struct pci_device_id saa7134_pci_tbl[] = { .subdevice = 0xf636, .driver_data = SAA7134_BOARD_AVERMEDIA_M103, }, { + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7133, + .subvendor = 0x1043, + .subdevice = 0x4878, /* REV:1.02G */ + .driver_data = SAA7134_BOARD_ASUSTeK_TIGER_3IN1, + }, { /* --- boards without eeprom + subsystem ID --- */ .vendor = PCI_VENDOR_ID_PHILIPS, .device = PCI_DEVICE_ID_PHILIPS_SAA7134, @@ -6002,6 +6038,14 @@ int saa7134_board_init2(struct saa7134_dev *dev) i2c_transfer(&dev->i2c_adap, &msg, 1); break; } + case SAA7134_BOARD_ASUSTeK_TIGER_3IN1: + { + u8 data[] = { 0x3c, 0x33, 0x60}; + struct i2c_msg msg = {.addr = 0x0b, .flags = 0, .buf = data, + .len = sizeof(data)}; + i2c_transfer(&dev->i2c_adap, &msg, 1); + break; + } case SAA7134_BOARD_FLYDVB_TRIO: { u8 data[] = { 0x3c, 0x33, 0x62}; diff --git a/drivers/media/video/saa7134/saa7134-dvb.c b/drivers/media/video/saa7134/saa7134-dvb.c index be48b9b..7fa6ce7 100644 --- a/drivers/media/video/saa7134/saa7134-dvb.c +++ b/drivers/media/video/saa7134/saa7134-dvb.c @@ -799,6 +799,20 @@ static struct tda1004x_config twinhan_dtv_dvb_3056_config = { .request_firmware = philips_tda1004x_request_firmware }; +static struct tda1004x_config asus_tiger_3in1_config = { + .demod_address = 0x0b, + .invert = 1, + .invert_oclk = 0, + .xtal_freq = TDA10046_XTAL_16M, + .agc_config = TDA10046_AGC_TDA827X, + .gpio_config = TDA10046_GP11_I, + .if_freq = TDA10046_FREQ_045, + .i2c_gate = 0x4b, + .tuner_address = 0x61, + .antenna_switch = 1, + .request_firmware = philips_tda1004x_request_firmware +}; + /* ------------------------------------------------------------------ * special case: this card uses saa713x GPIO22 for the mode switch */ @@ -1300,6 +1314,31 @@ static int dvb_init(struct saa7134_dev *dev) &dev->i2c_adap); attach_xc3028 = 1; break; + case SAA7134_BOARD_ASUSTeK_TIGER_3IN1: + if (!use_frontend) { /* terrestrial */ + if (configure_tda827x_fe(dev, &asus_tiger_3in1_config, + &tda827x_cfg_2) < 0) + goto dettach_frontend; + } else { /* satellite */ + dev->dvb.frontend = dvb_attach(tda10086_attach, + &flydvbs, &dev->i2c_adap); + if (dev->dvb.frontend) { + if (dvb_attach(tda826x_attach, + dev->dvb.frontend, 0x60, + &dev->i2c_adap, 0) == NULL) { + wprintk("%s: Asus Tiger 3in1, no " + "tda826x found!\n", __func__); + goto dettach_frontend; + } + if (dvb_attach(lnbp21_attach, dev->dvb.frontend, + &dev->i2c_adap, 0, 0) == NULL) { + wprintk("%s: Asus Tiger 3in1, no lnbp21" + " found!\n", __func__); + goto dettach_frontend; + } + } + } + break; default: wprintk("Huh? unknown DVB card?\n"); break; diff --git a/drivers/media/video/saa7134/saa7134.h b/drivers/media/video/saa7134/saa7134.h index 5e7fc73..cbfdac2 100644 --- a/drivers/media/video/saa7134/saa7134.h +++ b/drivers/media/video/saa7134/saa7134.h @@ -269,6 +269,7 @@ struct saa7134_format { #define SAA7134_BOARD_BEHOLD_M6_EXTRA 144 #define SAA7134_BOARD_AVERMEDIA_M103 145 #define SAA7134_BOARD_ASUSTeK_P7131_ANALOG 146 +#define SAA7134_BOARD_ASUSTeK_TIGER_3IN1 147 #define SAA7134_MAXBOARDS 8 #define SAA7134_INPUT_MAX 8 -- cgit v0.10.2 From 80845e1078463913f8b456e45f1fae886687c363 Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Mon, 15 Sep 2008 22:19:46 -0300 Subject: V4L/DVB (9030): uvcvideo : Add support for Advent 4211 integrated webcam Signed-off-by: Laurent Pinchart Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/uvc/uvc_driver.c b/drivers/media/video/uvc/uvc_driver.c index 4ab4d1e..fee85a2 100644 --- a/drivers/media/video/uvc/uvc_driver.c +++ b/drivers/media/video/uvc/uvc_driver.c @@ -1939,6 +1939,15 @@ static struct usb_device_id uvc_ids[] = { .bInterfaceSubClass = 1, .bInterfaceProtocol = 0, .driver_info = UVC_QUIRK_PROBE_MINMAX }, + /* Advent 4211 - Bison Electronics */ + { .match_flags = USB_DEVICE_ID_MATCH_DEVICE + | USB_DEVICE_ID_MATCH_INT_INFO, + .idVendor = 0x5986, + .idProduct = 0x0203, + .bInterfaceClass = USB_CLASS_VIDEO, + .bInterfaceSubClass = 1, + .bInterfaceProtocol = 0, + .driver_info = UVC_QUIRK_PROBE_MINMAX }, /* Bison Electronics */ { .match_flags = USB_DEVICE_ID_MATCH_DEVICE | USB_DEVICE_ID_MATCH_INT_INFO, -- cgit v0.10.2 From d63beb9ef004ff9587b3c466361276254d57d7a7 Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Mon, 15 Sep 2008 22:24:29 -0300 Subject: V4L/DVB (9031): uvcvideo: Fix incomplete frame drop when switching to a variable size format. When streaming in a fixed size format the driver sets a flag in the uvc_queue structure to drop incomplete incoming frames. The flag wasn't cleared when switching to a variable size format, which resulted in a broken 'MJPEG after YUV'. Signed-off-by: Laurent Pinchart Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/uvc/uvc_v4l2.c b/drivers/media/video/uvc/uvc_v4l2.c index d4758c8..78e4c4e 100644 --- a/drivers/media/video/uvc/uvc_v4l2.c +++ b/drivers/media/video/uvc/uvc_v4l2.c @@ -842,10 +842,6 @@ static int uvc_v4l2_do_ioctl(struct inode *inode, struct file *file, if (ret < 0) return ret; - if (!(video->streaming->cur_format->flags & - UVC_FMT_FLAG_COMPRESSED)) - video->queue.flags |= UVC_QUEUE_DROP_INCOMPLETE; - rb->count = ret; ret = 0; break; diff --git a/drivers/media/video/uvc/uvc_video.c b/drivers/media/video/uvc/uvc_video.c index 593aebf..b7bb238 100644 --- a/drivers/media/video/uvc/uvc_video.c +++ b/drivers/media/video/uvc/uvc_video.c @@ -971,6 +971,11 @@ int uvc_video_enable(struct uvc_video_device *video, int enable) return 0; } + if (video->streaming->cur_format->flags & UVC_FMT_FLAG_COMPRESSED) + video->queue.flags &= ~UVC_QUEUE_DROP_INCOMPLETE; + else + video->queue.flags |= UVC_QUEUE_DROP_INCOMPLETE; + if ((ret = uvc_queue_enable(&video->queue, 1)) < 0) return ret; -- cgit v0.10.2 From a31a4055473bf0a7b2b06cb2262347200d0711e1 Mon Sep 17 00:00:00 2001 From: Ming Lei Date: Tue, 16 Sep 2008 03:32:20 -0300 Subject: V4L/DVB:usbvideo:don't use part of buffer for USB transfer #4 The status[] is part of uvc_device structure. We can't make sure the address of status is at a cache-line boundary in all archs,so status[] might share a cache-line with some fields in uvc_structure. This can lead to some cache coherence issues(http://lwn.net/Articles/2265/). Use dynamically allocated buffer instead. Signed-off-by: Ming Lei Acked-by: Laurent Pinchart Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/uvc/uvc_status.c b/drivers/media/video/uvc/uvc_status.c index 75e678a..5d60b26 100644 --- a/drivers/media/video/uvc/uvc_status.c +++ b/drivers/media/video/uvc/uvc_status.c @@ -177,9 +177,15 @@ int uvc_status_init(struct uvc_device *dev) uvc_input_init(dev); + dev->status = kzalloc(UVC_MAX_STATUS_SIZE, GFP_KERNEL); + if (dev->status == NULL) + return -ENOMEM; + dev->int_urb = usb_alloc_urb(0, GFP_KERNEL); - if (dev->int_urb == NULL) + if (dev->int_urb == NULL) { + kfree(dev->status); return -ENOMEM; + } pipe = usb_rcvintpipe(dev->udev, ep->desc.bEndpointAddress); @@ -192,7 +198,7 @@ int uvc_status_init(struct uvc_device *dev) interval = fls(interval) - 1; usb_fill_int_urb(dev->int_urb, dev->udev, pipe, - dev->status, sizeof dev->status, uvc_status_complete, + dev->status, UVC_MAX_STATUS_SIZE, uvc_status_complete, dev, interval); return usb_submit_urb(dev->int_urb, GFP_KERNEL); @@ -202,6 +208,7 @@ void uvc_status_cleanup(struct uvc_device *dev) { usb_kill_urb(dev->int_urb); usb_free_urb(dev->int_urb); + kfree(dev->status); uvc_input_cleanup(dev); } diff --git a/drivers/media/video/uvc/uvcvideo.h b/drivers/media/video/uvc/uvcvideo.h index bafe340..9a6bc1a 100644 --- a/drivers/media/video/uvc/uvcvideo.h +++ b/drivers/media/video/uvc/uvcvideo.h @@ -303,6 +303,8 @@ struct uvc_xu_control { #define UVC_MAX_FRAME_SIZE (16*1024*1024) /* Maximum number of video buffers. */ #define UVC_MAX_VIDEO_BUFFERS 32 +/* Maximum status buffer size in bytes of interrupt URB. */ +#define UVC_MAX_STATUS_SIZE 16 #define UVC_CTRL_CONTROL_TIMEOUT 300 #define UVC_CTRL_STREAMING_TIMEOUT 1000 @@ -634,7 +636,7 @@ struct uvc_device { /* Status Interrupt Endpoint */ struct usb_host_endpoint *int_ep; struct urb *int_urb; - __u8 status[16]; + __u8 *status; struct input_dev *input; /* Video Streaming interfaces */ -- cgit v0.10.2 From 714b9a1e0ae3224728d1d96d77150ceea7487a61 Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Thu, 18 Sep 2008 23:26:35 -0300 Subject: V4L/DVB (9033): drivers/media/video/tda9840.c: unbreak drivers/media/video/tda9840.c: In function 'tda9840_command': drivers/media/video/tda9840.c:152: warning: 'result' is used uninitialized in this function [mchehab@redhat.com: Fix conflict with another patch that were meant to solve the warning] Signed-off-by: Andrew Morton Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/tda9840.c b/drivers/media/video/tda9840.c index 77bfd24..1c391f0 100644 --- a/drivers/media/video/tda9840.c +++ b/drivers/media/video/tda9840.c @@ -71,7 +71,6 @@ static void tda9840_write(struct i2c_client *client, u8 reg, u8 val) static int tda9840_command(struct i2c_client *client, unsigned cmd, void *arg) { - int result = 0; int byte = *(int *)arg; switch (cmd) { @@ -176,9 +175,6 @@ static int tda9840_command(struct i2c_client *client, unsigned cmd, void *arg) return -ENOIOCTLCMD; } - if (result) - return -EIO; - return 0; } -- cgit v0.10.2 From 4aaec3ea41addf6fe4fe029aa535f3c019ee0e6d Mon Sep 17 00:00:00 2001 From: David Ellingsworth Date: Sun, 21 Sep 2008 04:12:03 -0300 Subject: V4L/DVB (9034): With the recent patch to v4l2 titled "v4l2: use register_chrdev_region instead of register_chrdev", the internal reference count is no longer necessary in order to free the internal stk_webcam struct. This patch removes the reference counter from the stk_webcam struct and frees the struct via the video_device release callback. It also fixes an associated bug in stk_camera_probe which could result from video_unregister_device being called before video_register_device. Lastly, it simplifies access to the stk_webcam struct in several places. This patch should apply cleanly against the "working" branch of the v4l-dvb git repository. This patch is identical to the patch I sent a couple of months back titled "stk-webcam: Fix video_device handling" except that it has been rebased against current modifications to stk-webcam and it no longer depends on any other outstanding patches. Acked-by: Jaime Velasco Juan Signed-off-by: David Ellingsworth Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/stk-webcam.c b/drivers/media/video/stk-webcam.c index 8dda568..db69bc5 100644 --- a/drivers/media/video/stk-webcam.c +++ b/drivers/media/video/stk-webcam.c @@ -65,22 +65,6 @@ static struct usb_device_id stkwebcam_table[] = { }; MODULE_DEVICE_TABLE(usb, stkwebcam_table); -static void stk_camera_cleanup(struct kref *kref) -{ - struct stk_camera *dev = to_stk_camera(kref); - - STK_INFO("Syntek USB2.0 Camera release resources" - " video device /dev/video%d\n", dev->vdev.minor); - video_unregister_device(&dev->vdev); - video_set_drvdata(&dev->vdev, NULL); - - if (dev->sio_bufs != NULL || dev->isobufs != NULL) - STK_ERROR("We are leaking memory\n"); - usb_put_intf(dev->interface); - kfree(dev); -} - - /* * Basic stuff */ @@ -694,8 +678,7 @@ static int v4l_stk_open(struct inode *inode, struct file *fp) unlock_kernel(); return -ENXIO; } - fp->private_data = vdev; - kref_get(&dev->kref); + fp->private_data = dev; usb_autopm_get_interface(dev->interface); unlock_kernel(); @@ -704,23 +687,10 @@ static int v4l_stk_open(struct inode *inode, struct file *fp) static int v4l_stk_release(struct inode *inode, struct file *fp) { - struct stk_camera *dev; - struct video_device *vdev; - - vdev = video_devdata(fp); - if (vdev == NULL) { - STK_ERROR("v4l_release called w/o video devdata\n"); - return -EFAULT; - } - dev = vdev_to_camera(vdev); - if (dev == NULL) { - STK_ERROR("v4l_release called on removed device\n"); - return -ENODEV; - } + struct stk_camera *dev = fp->private_data; if (dev->owner != fp) { usb_autopm_put_interface(dev->interface); - kref_put(&dev->kref, stk_camera_cleanup); return 0; } @@ -731,7 +701,6 @@ static int v4l_stk_release(struct inode *inode, struct file *fp) dev->owner = NULL; usb_autopm_put_interface(dev->interface); - kref_put(&dev->kref, stk_camera_cleanup); return 0; } @@ -742,14 +711,8 @@ static ssize_t v4l_stk_read(struct file *fp, char __user *buf, int i; int ret; unsigned long flags; - struct stk_camera *dev; - struct video_device *vdev; struct stk_sio_buffer *sbuf; - - vdev = video_devdata(fp); - if (vdev == NULL) - return -EFAULT; - dev = vdev_to_camera(vdev); + struct stk_camera *dev = fp->private_data; if (dev == NULL) return -EIO; @@ -808,15 +771,8 @@ static ssize_t v4l_stk_read(struct file *fp, char __user *buf, static unsigned int v4l_stk_poll(struct file *fp, poll_table *wait) { - struct stk_camera *dev; - struct video_device *vdev; - - vdev = video_devdata(fp); - - if (vdev == NULL) - return -EFAULT; + struct stk_camera *dev = fp->private_data; - dev = vdev_to_camera(vdev); if (dev == NULL) return -ENODEV; @@ -854,16 +810,12 @@ static int v4l_stk_mmap(struct file *fp, struct vm_area_struct *vma) unsigned int i; int ret; unsigned long offset = vma->vm_pgoff << PAGE_SHIFT; - struct stk_camera *dev; - struct video_device *vdev; + struct stk_camera *dev = fp->private_data; struct stk_sio_buffer *sbuf = NULL; if (!(vma->vm_flags & VM_WRITE) || !(vma->vm_flags & VM_SHARED)) return -EINVAL; - vdev = video_devdata(fp); - dev = vdev_to_camera(vdev); - for (i = 0; i < dev->n_sbufs; i++) { if (dev->sio_bufs[i].v4lbuf.m.offset == offset) { sbuf = dev->sio_bufs + i; @@ -1359,6 +1311,12 @@ static const struct v4l2_ioctl_ops v4l_stk_ioctl_ops = { static void stk_v4l_dev_release(struct video_device *vd) { + struct stk_camera *dev = vdev_to_camera(vd); + + if (dev->sio_bufs != NULL || dev->isobufs != NULL) + STK_ERROR("We are leaking memory\n"); + usb_put_intf(dev->interface); + kfree(dev); } static struct video_device stk_v4l_data = { @@ -1379,7 +1337,6 @@ static int stk_register_video_device(struct stk_camera *dev) dev->vdev = stk_v4l_data; dev->vdev.debug = debug; dev->vdev.parent = &dev->interface->dev; - video_set_drvdata(&dev->vdev, dev); err = video_register_device(&dev->vdev, VFL_TYPE_GRABBER, -1); if (err) STK_ERROR("v4l registration failed\n"); @@ -1396,7 +1353,7 @@ static int stk_camera_probe(struct usb_interface *interface, const struct usb_device_id *id) { int i; - int err; + int err = 0; struct stk_camera *dev = NULL; struct usb_device *udev = interface_to_usbdev(interface); @@ -1409,7 +1366,6 @@ static int stk_camera_probe(struct usb_interface *interface, return -ENOMEM; } - kref_init(&dev->kref); spin_lock_init(&dev->spinlock); init_waitqueue_head(&dev->wait_frame); @@ -1442,8 +1398,8 @@ static int stk_camera_probe(struct usb_interface *interface, } if (!dev->isoc_ep) { STK_ERROR("Could not find isoc-in endpoint"); - kref_put(&dev->kref, stk_camera_cleanup); - return -ENODEV; + err = -ENODEV; + goto error; } dev->vsettings.brightness = 0x7fff; dev->vsettings.palette = V4L2_PIX_FMT_RGB565; @@ -1457,14 +1413,17 @@ static int stk_camera_probe(struct usb_interface *interface, err = stk_register_video_device(dev); if (err) { - kref_put(&dev->kref, stk_camera_cleanup); - return err; + goto error; } stk_create_sysfs_files(&dev->vdev); usb_autopm_enable(dev->interface); return 0; + +error: + kfree(dev); + return err; } static void stk_camera_disconnect(struct usb_interface *interface) @@ -1477,7 +1436,10 @@ static void stk_camera_disconnect(struct usb_interface *interface) wake_up_interruptible(&dev->wait_frame); stk_remove_sysfs_files(&dev->vdev); - kref_put(&dev->kref, stk_camera_cleanup); + STK_INFO("Syntek USB2.0 Camera release resources" + "video device /dev/video%d\n", dev->vdev.minor); + + video_unregister_device(&dev->vdev); } #ifdef CONFIG_PM diff --git a/drivers/media/video/stk-webcam.h b/drivers/media/video/stk-webcam.h index df4dfef..084a85b 100644 --- a/drivers/media/video/stk-webcam.h +++ b/drivers/media/video/stk-webcam.h @@ -99,7 +99,6 @@ struct stk_camera { u8 isoc_ep; - struct kref kref; /* Not sure if this is right */ atomic_t urbs_used; @@ -121,7 +120,6 @@ struct stk_camera { unsigned sequence; }; -#define to_stk_camera(d) container_of(d, struct stk_camera, kref) #define vdev_to_camera(d) container_of(d, struct stk_camera, vdev) void stk_camera_delete(struct kref *); -- cgit v0.10.2 From 5e26d50f4e6b9c42bbfbaa452722797ece929cda Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Mon, 22 Sep 2008 13:14:59 -0300 Subject: V4L/DVB (9035): uvcvideo: Declare missing camera and processing unit controls. This declares all missing UVC camera and processing unit controls. V4L2 mappings are not supported yet for those controls. Signed-off-by: Laurent Pinchart Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/uvc/uvc_ctrl.c b/drivers/media/video/uvc/uvc_ctrl.c index feab12a..088437a 100644 --- a/drivers/media/video/uvc/uvc_ctrl.c +++ b/drivers/media/video/uvc/uvc_ctrl.c @@ -83,6 +83,22 @@ static struct uvc_control_info uvc_ctrls[] = { }, { .entity = UVC_GUID_UVC_PROCESSING, + .selector = PU_WHITE_BALANCE_TEMPERATURE_CONTROL, + .index = 6, + .size = 2, + .flags = UVC_CONTROL_SET_CUR | UVC_CONTROL_GET_RANGE + | UVC_CONTROL_RESTORE | UVC_CONTROL_AUTO_UPDATE, + }, + { + .entity = UVC_GUID_UVC_PROCESSING, + .selector = PU_WHITE_BALANCE_COMPONENT_CONTROL, + .index = 7, + .size = 4, + .flags = UVC_CONTROL_SET_CUR | UVC_CONTROL_GET_RANGE + | UVC_CONTROL_RESTORE | UVC_CONTROL_AUTO_UPDATE, + }, + { + .entity = UVC_GUID_UVC_PROCESSING, .selector = PU_BACKLIGHT_COMPENSATION_CONTROL, .index = 8, .size = 2, @@ -114,6 +130,60 @@ static struct uvc_control_info uvc_ctrls[] = { | UVC_CONTROL_GET_DEF | UVC_CONTROL_RESTORE, }, { + .entity = UVC_GUID_UVC_PROCESSING, + .selector = PU_WHITE_BALANCE_TEMPERATURE_AUTO_CONTROL, + .index = 12, + .size = 1, + .flags = UVC_CONTROL_SET_CUR | UVC_CONTROL_GET_CUR + | UVC_CONTROL_GET_DEF | UVC_CONTROL_RESTORE, + }, + { + .entity = UVC_GUID_UVC_PROCESSING, + .selector = PU_WHITE_BALANCE_COMPONENT_AUTO_CONTROL, + .index = 13, + .size = 1, + .flags = UVC_CONTROL_SET_CUR | UVC_CONTROL_GET_CUR + | UVC_CONTROL_GET_DEF | UVC_CONTROL_RESTORE, + }, + { + .entity = UVC_GUID_UVC_PROCESSING, + .selector = PU_DIGITAL_MULTIPLIER_CONTROL, + .index = 14, + .size = 2, + .flags = UVC_CONTROL_SET_CUR | UVC_CONTROL_GET_RANGE + | UVC_CONTROL_RESTORE, + }, + { + .entity = UVC_GUID_UVC_PROCESSING, + .selector = PU_DIGITAL_MULTIPLIER_LIMIT_CONTROL, + .index = 15, + .size = 2, + .flags = UVC_CONTROL_SET_CUR | UVC_CONTROL_GET_RANGE + | UVC_CONTROL_RESTORE, + }, + { + .entity = UVC_GUID_UVC_PROCESSING, + .selector = PU_ANALOG_VIDEO_STANDARD_CONTROL, + .index = 16, + .size = 1, + .flags = UVC_CONTROL_GET_CUR, + }, + { + .entity = UVC_GUID_UVC_PROCESSING, + .selector = PU_ANALOG_LOCK_STATUS_CONTROL, + .index = 17, + .size = 1, + .flags = UVC_CONTROL_GET_CUR, + }, + { + .entity = UVC_GUID_UVC_CAMERA, + .selector = CT_SCANNING_MODE_CONTROL, + .index = 0, + .size = 1, + .flags = UVC_CONTROL_SET_CUR | UVC_CONTROL_GET_CUR + | UVC_CONTROL_RESTORE, + }, + { .entity = UVC_GUID_UVC_CAMERA, .selector = CT_AE_MODE_CONTROL, .index = 1, @@ -140,6 +210,14 @@ static struct uvc_control_info uvc_ctrls[] = { }, { .entity = UVC_GUID_UVC_CAMERA, + .selector = CT_EXPOSURE_TIME_RELATIVE_CONTROL, + .index = 4, + .size = 1, + .flags = UVC_CONTROL_SET_CUR | UVC_CONTROL_GET_CUR + | UVC_CONTROL_RESTORE, + }, + { + .entity = UVC_GUID_UVC_CAMERA, .selector = CT_FOCUS_ABSOLUTE_CONTROL, .index = 5, .size = 2, @@ -148,42 +226,90 @@ static struct uvc_control_info uvc_ctrls[] = { }, { .entity = UVC_GUID_UVC_CAMERA, - .selector = CT_FOCUS_AUTO_CONTROL, - .index = 17, - .size = 1, - .flags = UVC_CONTROL_SET_CUR | UVC_CONTROL_GET_CUR - | UVC_CONTROL_GET_DEF | UVC_CONTROL_RESTORE, + .selector = CT_FOCUS_RELATIVE_CONTROL, + .index = 6, + .size = 2, + .flags = UVC_CONTROL_SET_CUR | UVC_CONTROL_GET_RANGE + | UVC_CONTROL_AUTO_UPDATE, }, { - .entity = UVC_GUID_UVC_PROCESSING, - .selector = PU_WHITE_BALANCE_TEMPERATURE_AUTO_CONTROL, - .index = 12, + .entity = UVC_GUID_UVC_CAMERA, + .selector = CT_IRIS_ABSOLUTE_CONTROL, + .index = 7, + .size = 2, + .flags = UVC_CONTROL_SET_CUR | UVC_CONTROL_GET_RANGE + | UVC_CONTROL_RESTORE | UVC_CONTROL_AUTO_UPDATE, + }, + { + .entity = UVC_GUID_UVC_CAMERA, + .selector = CT_IRIS_RELATIVE_CONTROL, + .index = 8, .size = 1, .flags = UVC_CONTROL_SET_CUR | UVC_CONTROL_GET_CUR - | UVC_CONTROL_GET_DEF | UVC_CONTROL_RESTORE, + | UVC_CONTROL_AUTO_UPDATE, }, { - .entity = UVC_GUID_UVC_PROCESSING, - .selector = PU_WHITE_BALANCE_TEMPERATURE_CONTROL, - .index = 6, + .entity = UVC_GUID_UVC_CAMERA, + .selector = CT_ZOOM_ABSOLUTE_CONTROL, + .index = 9, .size = 2, .flags = UVC_CONTROL_SET_CUR | UVC_CONTROL_GET_RANGE | UVC_CONTROL_RESTORE | UVC_CONTROL_AUTO_UPDATE, }, { - .entity = UVC_GUID_UVC_PROCESSING, - .selector = PU_WHITE_BALANCE_COMPONENT_AUTO_CONTROL, + .entity = UVC_GUID_UVC_CAMERA, + .selector = CT_ZOOM_RELATIVE_CONTROL, + .index = 10, + .size = 3, + .flags = UVC_CONTROL_SET_CUR | UVC_CONTROL_GET_RANGE + | UVC_CONTROL_AUTO_UPDATE, + }, + { + .entity = UVC_GUID_UVC_CAMERA, + .selector = CT_PANTILT_ABSOLUTE_CONTROL, + .index = 11, + .size = 8, + .flags = UVC_CONTROL_SET_CUR | UVC_CONTROL_GET_RANGE + | UVC_CONTROL_RESTORE | UVC_CONTROL_AUTO_UPDATE, + }, + { + .entity = UVC_GUID_UVC_CAMERA, + .selector = CT_PANTILT_RELATIVE_CONTROL, + .index = 12, + .size = 4, + .flags = UVC_CONTROL_SET_CUR | UVC_CONTROL_GET_RANGE + | UVC_CONTROL_AUTO_UPDATE, + }, + { + .entity = UVC_GUID_UVC_CAMERA, + .selector = CT_ROLL_ABSOLUTE_CONTROL, .index = 13, + .size = 2, + .flags = UVC_CONTROL_SET_CUR | UVC_CONTROL_GET_RANGE + | UVC_CONTROL_RESTORE | UVC_CONTROL_AUTO_UPDATE, + }, + { + .entity = UVC_GUID_UVC_CAMERA, + .selector = CT_ROLL_RELATIVE_CONTROL, + .index = 14, + .size = 2, + .flags = UVC_CONTROL_SET_CUR | UVC_CONTROL_GET_RANGE + | UVC_CONTROL_AUTO_UPDATE, + }, + { + .entity = UVC_GUID_UVC_CAMERA, + .selector = CT_FOCUS_AUTO_CONTROL, + .index = 17, .size = 1, .flags = UVC_CONTROL_SET_CUR | UVC_CONTROL_GET_CUR | UVC_CONTROL_GET_DEF | UVC_CONTROL_RESTORE, }, { - .entity = UVC_GUID_UVC_PROCESSING, - .selector = PU_WHITE_BALANCE_COMPONENT_CONTROL, - .index = 7, - .size = 4, - .flags = UVC_CONTROL_SET_CUR | UVC_CONTROL_GET_RANGE + .entity = UVC_GUID_UVC_CAMERA, + .selector = CT_PRIVACY_CONTROL, + .index = 18, + .size = 1, + .flags = UVC_CONTROL_SET_CUR | UVC_CONTROL_GET_CUR | UVC_CONTROL_RESTORE | UVC_CONTROL_AUTO_UPDATE, }, }; -- cgit v0.10.2 From b1accfa15533fdd40280aae3102e9599e63a7c10 Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Sat, 27 Sep 2008 20:54:02 -0300 Subject: V4L/DVB (9036): uvcvideo: Fix control cache access when setting composite auto-update controls Auto-update controls are never marked is loaded to prevent uvc_get_ctrl from loading the control value from the cache. When setting a composite (mapped to several V4L2 controls) auto-update UVC control, the driver updates the control cache value before processing each V4L2 control, overwriting the previously set V4L2 control. This fixes the problem by marking all controls as loaded in uvc_set_ctrl regardless of their type and resetting the loaded flag in uvc_commit_ctrl for auto-update controls. Signed-off-by: Laurent Pinchart Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/uvc/uvc_ctrl.c b/drivers/media/video/uvc/uvc_ctrl.c index 088437a..f16aafe 100644 --- a/drivers/media/video/uvc/uvc_ctrl.c +++ b/drivers/media/video/uvc/uvc_ctrl.c @@ -837,7 +837,17 @@ static int uvc_ctrl_commit_entity(struct uvc_device *dev, for (i = 0; i < entity->ncontrols; ++i) { ctrl = &entity->controls[i]; - if (ctrl->info == NULL || !ctrl->dirty) + if (ctrl->info == NULL) + continue; + + /* Reset the loaded flag for auto-update controls that were + * marked as loaded in uvc_ctrl_get/uvc_ctrl_set to prevent + * uvc_ctrl_get from using the cached value. + */ + if (ctrl->info->flags & UVC_CONTROL_AUTO_UPDATE) + ctrl->loaded = 0; + + if (!ctrl->dirty) continue; if (!rollback) @@ -853,9 +863,6 @@ static int uvc_ctrl_commit_entity(struct uvc_device *dev, uvc_ctrl_data(ctrl, UVC_CTRL_DATA_BACKUP), ctrl->info->size); - if ((ctrl->info->flags & UVC_CONTROL_GET_CUR) == 0) - ctrl->loaded = 0; - ctrl->dirty = 0; if (ret < 0) @@ -913,8 +920,7 @@ int uvc_ctrl_get(struct uvc_video_device *video, if (ret < 0) return ret; - if ((ctrl->info->flags & UVC_CONTROL_AUTO_UPDATE) == 0) - ctrl->loaded = 1; + ctrl->loaded = 1; } xctrl->value = uvc_get_le_value( @@ -965,8 +971,7 @@ int uvc_ctrl_set(struct uvc_video_device *video, return ret; } - if ((ctrl->info->flags & UVC_CONTROL_AUTO_UPDATE) == 0) - ctrl->loaded = 1; + ctrl->loaded = 1; } if (!ctrl->dirty) { -- cgit v0.10.2 From 17a370bcca661a849c9af07feae86f42d0c6dfd1 Mon Sep 17 00:00:00 2001 From: Finn Thain Date: Sat, 6 Sep 2008 13:42:47 -0300 Subject: V4L/DVB (9038): Add support for the Gigabyte R8000-HT USB DVB-T adapter. Thanks to Ilia Penev for the tip-off that this device is much the same as (identical to?) a Terratec Cinergy HT USB XE, and for the firmware hints: http://linuxtv.org/pipermail/linux-dvb/2008-August/028108.html DVB functionality tested OK with xine using the usual dib0700 firmware. This diff is based on the latest latest linuxtv.org v4l-dvb mercurial repo. Signed-off-by: Finn Thain Signed-off-by: Patrick Boettcher Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/dvb/dvb-usb/dib0700_devices.c b/drivers/media/dvb/dvb-usb/dib0700_devices.c index 6c0e5c5..110d934 100644 --- a/drivers/media/dvb/dvb-usb/dib0700_devices.c +++ b/drivers/media/dvb/dvb-usb/dib0700_devices.c @@ -1119,6 +1119,7 @@ struct usb_device_id dib0700_usb_id_table[] = { { USB_DEVICE(USB_VID_LEADTEK, USB_PID_WINFAST_DTV_DONGLE_STK7700P_2) }, /* 35 */{ USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_HAUPPAUGE_NOVA_TD_STICK_52009) }, { USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_HAUPPAUGE_NOVA_T_500_3) }, + { USB_DEVICE(USB_VID_GIGABYTE, USB_PID_GIGABYTE_U8000) }, { 0 } /* Terminating entry */ }; MODULE_DEVICE_TABLE(usb, dib0700_usb_id_table); @@ -1408,7 +1409,7 @@ struct dvb_usb_device_properties dib0700_devices[] = { }, }, - .num_device_descs = 3, + .num_device_descs = 4, .devices = { { "Terratec Cinergy HT USB XE", { &dib0700_usb_id_table[27], NULL }, @@ -1422,6 +1423,10 @@ struct dvb_usb_device_properties dib0700_devices[] = { { &dib0700_usb_id_table[32], NULL }, { NULL }, }, + { "Gigabyte U8000-RH", + { &dib0700_usb_id_table[37], NULL }, + { NULL }, + }, }, .rc_interval = DEFAULT_RC_INTERVAL, .rc_key_map = dib0700_rc_keys, diff --git a/drivers/media/dvb/dvb-usb/dvb-usb-ids.h b/drivers/media/dvb/dvb-usb/dvb-usb-ids.h index 7ae262e..e60e873 100644 --- a/drivers/media/dvb/dvb-usb/dvb-usb-ids.h +++ b/drivers/media/dvb/dvb-usb/dvb-usb-ids.h @@ -221,6 +221,7 @@ #define USB_PID_LIFEVIEW_TV_WALKER_TWIN_COLD 0x0514 #define USB_PID_LIFEVIEW_TV_WALKER_TWIN_WARM 0x0513 #define USB_PID_GIGABYTE_U7000 0x7001 +#define USB_PID_GIGABYTE_U8000 0x7002 #define USB_PID_ASUS_U3000 0x171f #define USB_PID_ASUS_U3100 0x173f #define USB_PID_YUAN_EC372S 0x1edc -- cgit v0.10.2 From bdc203e156ce938e12d957912bd29ca53d160540 Mon Sep 17 00:00:00 2001 From: Devin Heitmueller Date: Sat, 6 Sep 2008 13:45:27 -0300 Subject: V4L/DVB (9039): Add support for new i2c API provided in firmware version 1.20 The Pinnacle PCTV HD Pro has an xc5000, which exposed a bug in the dib0700's i2c implementation where it did not properly support a single i2c read request (sending it as an i2c write request instead). Version 1.20 of the firmware added support for a new i2c API which supported such requests. This change defaults to fw 1.20 for all devices, but does not default to using the new i2c API (since initial testing suggests problems interacting with the mt2060). Maintainers can enable the use of the new i2c API by putting the following into their frontend initialization: struct dib0700_state *st = adap->dev->priv; st->fw_use_new_i2c_api = 1; Also note that the code expects i2c repeated start to be supported. If the i2c slave does not support repeated start, i2c messsages should have the I2C_M_NOSTART flag set. Thanks to Patrick Boettcher for providing new firmware fixing the issue as well as example i2c code utilizing the interface. Signed-off-by: Devin Heitmueller Signed-off-by: Patrick Boettcher Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/dvb/dvb-usb/dib0700.h b/drivers/media/dvb/dvb-usb/dib0700.h index 66d4dc6..cc0c51d 100644 --- a/drivers/media/dvb/dvb-usb/dib0700.h +++ b/drivers/media/dvb/dvb-usb/dib0700.h @@ -31,6 +31,8 @@ extern int dvb_usb_dib0700_debug; // 2 Byte: MPEG2 mode: 4MSB(1 = Master Mode, 0 = Slave Mode) 4LSB(Channel 1 = bit0, Channel 2 = bit1) // 2 Byte: Analog mode: 4MSB(0 = 625 lines, 1 = 525 lines) 4LSB( " " ) #define REQUEST_SET_RC 0x11 +#define REQUEST_NEW_I2C_READ 0x12 +#define REQUEST_NEW_I2C_WRITE 0x13 #define REQUEST_GET_VERSION 0x15 struct dib0700_state { @@ -39,6 +41,7 @@ struct dib0700_state { u8 rc_toggle; u8 rc_counter; u8 is_dib7000pc; + u8 fw_use_new_i2c_api; }; extern int dib0700_set_gpio(struct dvb_usb_device *, enum dib07x0_gpios gpio, u8 gpio_dir, u8 gpio_val); diff --git a/drivers/media/dvb/dvb-usb/dib0700_core.c b/drivers/media/dvb/dvb-usb/dib0700_core.c index 595a046..4daac86 100644 --- a/drivers/media/dvb/dvb-usb/dib0700_core.c +++ b/drivers/media/dvb/dvb-usb/dib0700_core.c @@ -82,9 +82,98 @@ int dib0700_set_gpio(struct dvb_usb_device *d, enum dib07x0_gpios gpio, u8 gpio_ } /* - * I2C master xfer function + * I2C master xfer function (supported in 1.20 firmware) */ -static int dib0700_i2c_xfer(struct i2c_adapter *adap,struct i2c_msg *msg,int num) +static int dib0700_i2c_xfer_new(struct i2c_adapter *adap, struct i2c_msg *msg, + int num) +{ + /* The new i2c firmware messages are more reliable and in particular + properly support i2c read calls not preceded by a write */ + + struct dvb_usb_device *d = i2c_get_adapdata(adap); + uint8_t bus_mode = 1; /* 0=eeprom bus, 1=frontend bus */ + uint8_t gen_mode = 0; /* 0=master i2c, 1=gpio i2c */ + uint8_t en_start = 0; + uint8_t en_stop = 0; + uint8_t buf[255]; /* TBV: malloc ? */ + int result, i; + + /* Ensure nobody else hits the i2c bus while we're sending our + sequence of messages, (such as the remote control thread) */ + if (mutex_lock_interruptible(&d->i2c_mutex) < 0) + return -EAGAIN; + + for (i = 0; i < num; i++) { + if (i == 0) { + /* First message in the transaction */ + en_start = 1; + } else if (!(msg[i].flags & I2C_M_NOSTART)) { + /* Device supports repeated-start */ + en_start = 1; + } else { + /* Not the first packet and device doesn't support + repeated start */ + en_start = 0; + } + if (i == (num - 1)) { + /* Last message in the transaction */ + en_stop = 1; + } + + if (msg[i].flags & I2C_M_RD) { + /* Read request */ + u16 index, value; + uint8_t i2c_dest; + + i2c_dest = (msg[i].addr << 1); + value = ((en_start << 7) | (en_stop << 6) | + (msg[i].len & 0x3F)) << 8 | i2c_dest; + /* I2C ctrl + FE bus; */ + index = ((gen_mode<<6)&0xC0) | ((bus_mode<<4)&0x30); + + result = usb_control_msg(d->udev, + usb_rcvctrlpipe(d->udev, 0), + REQUEST_NEW_I2C_READ, + USB_TYPE_VENDOR | USB_DIR_IN, + value, index, msg[i].buf, + msg[i].len, + USB_CTRL_GET_TIMEOUT); + if (result < 0) { + err("i2c read error (status = %d)\n", result); + break; + } + } else { + /* Write request */ + buf[0] = REQUEST_NEW_I2C_WRITE; + buf[1] = (msg[i].addr << 1); + buf[2] = (en_start << 7) | (en_stop << 6) | + (msg[i].len & 0x3F); + /* I2C ctrl + FE bus; */ + buf[3] = ((gen_mode<<6)&0xC0) | ((bus_mode<<4)&0x30); + /* The Actual i2c payload */ + memcpy(&buf[4], msg[i].buf, msg[i].len); + + result = usb_control_msg(d->udev, + usb_sndctrlpipe(d->udev, 0), + REQUEST_NEW_I2C_WRITE, + USB_TYPE_VENDOR | USB_DIR_OUT, + 0, 0, buf, msg[i].len + 4, + USB_CTRL_GET_TIMEOUT); + if (result < 0) { + err("i2c write error (status = %d)\n", result); + break; + } + } + } + mutex_unlock(&d->i2c_mutex); + return i; +} + +/* + * I2C master xfer function (pre-1.20 firmware) + */ +static int dib0700_i2c_xfer_legacy(struct i2c_adapter *adap, + struct i2c_msg *msg, int num) { struct dvb_usb_device *d = i2c_get_adapdata(adap); int i,len; @@ -124,6 +213,21 @@ static int dib0700_i2c_xfer(struct i2c_adapter *adap,struct i2c_msg *msg,int num return i; } +static int dib0700_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg *msg, + int num) +{ + struct dvb_usb_device *d = i2c_get_adapdata(adap); + struct dib0700_state *st = d->priv; + + if (st->fw_use_new_i2c_api == 1) { + /* User running at least fw 1.20 */ + return dib0700_i2c_xfer_new(adap, msg, num); + } else { + /* Use legacy calls */ + return dib0700_i2c_xfer_legacy(adap, msg, num); + } +} + static u32 dib0700_i2c_func(struct i2c_adapter *adapter) { return I2C_FUNC_I2C; diff --git a/drivers/media/dvb/dvb-usb/dib0700_devices.c b/drivers/media/dvb/dvb-usb/dib0700_devices.c index 110d934..2555e53 100644 --- a/drivers/media/dvb/dvb-usb/dib0700_devices.c +++ b/drivers/media/dvb/dvb-usb/dib0700_devices.c @@ -1127,7 +1127,7 @@ MODULE_DEVICE_TABLE(usb, dib0700_usb_id_table); #define DIB0700_DEFAULT_DEVICE_PROPERTIES \ .caps = DVB_USB_IS_AN_I2C_ADAPTER, \ .usb_ctrl = DEVICE_SPECIFIC, \ - .firmware = "dvb-usb-dib0700-1.10.fw", \ + .firmware = "dvb-usb-dib0700-1.20.fw", \ .download_firmware = dib0700_download_firmware, \ .no_reconnect = 1, \ .size_of_priv = sizeof(struct dib0700_state), \ -- cgit v0.10.2 From 4d2858c65bbd9a98d109b3548b4742d7fd74dcb0 Mon Sep 17 00:00:00 2001 From: Peter Beutner Date: Sat, 6 Sep 2008 13:54:06 -0300 Subject: V4L/DVB (9040): TTUSB-DEC DVB-S: claim to have lock As reported by BOUWSMA Barry the readout of the signal status doesn't work on dec3000-s models. Since we don't know how to do it better, revert back to the old behaviour and always report a signal lock. Reported by Barry Bouwsma Signed-off-by: Peter Beutner Signed-off-by: Patrick Boettcher Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/dvb/ttusb-dec/ttusbdecfe.c b/drivers/media/dvb/ttusb-dec/ttusbdecfe.c index 443af24..21260aa 100644 --- a/drivers/media/dvb/ttusb-dec/ttusbdecfe.c +++ b/drivers/media/dvb/ttusb-dec/ttusbdecfe.c @@ -38,7 +38,17 @@ struct ttusbdecfe_state { }; -static int ttusbdecfe_read_status(struct dvb_frontend* fe, fe_status_t* status) +static int ttusbdecfe_dvbs_read_status(struct dvb_frontend *fe, + fe_status_t *status) +{ + *status = FE_HAS_SIGNAL | FE_HAS_VITERBI | + FE_HAS_SYNC | FE_HAS_CARRIER | FE_HAS_LOCK; + return 0; +} + + +static int ttusbdecfe_dvbt_read_status(struct dvb_frontend *fe, + fe_status_t *status) { struct ttusbdecfe_state* state = fe->demodulator_priv; u8 b[] = { 0x00, 0x00, 0x00, 0x00, @@ -251,7 +261,7 @@ static struct dvb_frontend_ops ttusbdecfe_dvbt_ops = { .get_tune_settings = ttusbdecfe_dvbt_get_tune_settings, - .read_status = ttusbdecfe_read_status, + .read_status = ttusbdecfe_dvbt_read_status, }; static struct dvb_frontend_ops ttusbdecfe_dvbs_ops = { @@ -273,7 +283,7 @@ static struct dvb_frontend_ops ttusbdecfe_dvbs_ops = { .set_frontend = ttusbdecfe_dvbs_set_frontend, - .read_status = ttusbdecfe_read_status, + .read_status = ttusbdecfe_dvbs_read_status, .diseqc_send_master_cmd = ttusbdecfe_dvbs_diseqc_send_master_cmd, .set_voltage = ttusbdecfe_dvbs_set_voltage, -- cgit v0.10.2 From 8751aaa6c8be191171cd8c7db01a9b4e01892b08 Mon Sep 17 00:00:00 2001 From: Daniel Oliveira Nascimento Date: Sun, 7 Sep 2008 12:39:44 -0300 Subject: V4L/DVB (9041): Add support YUAN High-Tech STK7700D (1164:1f08) This patch extends the dib0700 driver to support the DVB-part of the Asus notebook M51Sn tv-tunner (USB-ID 1164:1f08). Signed-off-by: Patrick Boettcher Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/dvb/dvb-usb/dib0700_devices.c b/drivers/media/dvb/dvb-usb/dib0700_devices.c index 2555e53..a5e970e 100644 --- a/drivers/media/dvb/dvb-usb/dib0700_devices.c +++ b/drivers/media/dvb/dvb-usb/dib0700_devices.c @@ -1120,6 +1120,7 @@ struct usb_device_id dib0700_usb_id_table[] = { /* 35 */{ USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_HAUPPAUGE_NOVA_TD_STICK_52009) }, { USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_HAUPPAUGE_NOVA_T_500_3) }, { USB_DEVICE(USB_VID_GIGABYTE, USB_PID_GIGABYTE_U8000) }, + { USB_DEVICE(USB_VID_YUAN, USB_PID_YUAN_STK7700PH) }, { 0 } /* Terminating entry */ }; MODULE_DEVICE_TABLE(usb, dib0700_usb_id_table); @@ -1409,7 +1410,7 @@ struct dvb_usb_device_properties dib0700_devices[] = { }, }, - .num_device_descs = 4, + .num_device_descs = 5, .devices = { { "Terratec Cinergy HT USB XE", { &dib0700_usb_id_table[27], NULL }, @@ -1427,6 +1428,10 @@ struct dvb_usb_device_properties dib0700_devices[] = { { &dib0700_usb_id_table[37], NULL }, { NULL }, }, + { "YUAN High-Tech STK7700PH", + { &dib0700_usb_id_table[38], NULL }, + { NULL }, + }, }, .rc_interval = DEFAULT_RC_INTERVAL, .rc_key_map = dib0700_rc_keys, diff --git a/drivers/media/dvb/dvb-usb/dvb-usb-ids.h b/drivers/media/dvb/dvb-usb/dvb-usb-ids.h index e60e873..7bf5a1c 100644 --- a/drivers/media/dvb/dvb-usb/dvb-usb-ids.h +++ b/drivers/media/dvb/dvb-usb/dvb-usb-ids.h @@ -225,6 +225,7 @@ #define USB_PID_ASUS_U3000 0x171f #define USB_PID_ASUS_U3100 0x173f #define USB_PID_YUAN_EC372S 0x1edc +#define USB_PID_YUAN_STK7700PH 0x1f08 #define USB_PID_DW2102 0x2102 #define USB_PID_XTENSIONS_XD_380 0x0381 #define USB_PID_TELESTAR_STARSTICK_2 0x8000 -- cgit v0.10.2 From 5769743ad345881911cee4e73ddf6120b00ed3eb Mon Sep 17 00:00:00 2001 From: Albert Comerma Date: Sun, 7 Sep 2008 12:43:33 -0300 Subject: V4L/DVB (9042): Add support for Asus My Cinema U3000 Hybrid This patch introduces support for dvb-t for the following dibcom based cards: Asus My Cinema U3000 Hybrid (USB-ID: 0b05:1736) Signed-off-by: Albert Comerma Signed-off-by: Patrick Boettcher Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/dvb/dvb-usb/dib0700_devices.c b/drivers/media/dvb/dvb-usb/dib0700_devices.c index a5e970e..d08cd45 100644 --- a/drivers/media/dvb/dvb-usb/dib0700_devices.c +++ b/drivers/media/dvb/dvb-usb/dib0700_devices.c @@ -1121,6 +1121,7 @@ struct usb_device_id dib0700_usb_id_table[] = { { USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_HAUPPAUGE_NOVA_T_500_3) }, { USB_DEVICE(USB_VID_GIGABYTE, USB_PID_GIGABYTE_U8000) }, { USB_DEVICE(USB_VID_YUAN, USB_PID_YUAN_STK7700PH) }, + { USB_DEVICE(USB_VID_ASUS, USB_PID_ASUS_U3000H) }, { 0 } /* Terminating entry */ }; MODULE_DEVICE_TABLE(usb, dib0700_usb_id_table); @@ -1432,6 +1433,10 @@ struct dvb_usb_device_properties dib0700_devices[] = { { &dib0700_usb_id_table[38], NULL }, { NULL }, }, + { "Asus My Cinema-U3000Hybrid", + { &dib0700_usb_id_table[39], NULL }, + { NULL }, + }, }, .rc_interval = DEFAULT_RC_INTERVAL, .rc_key_map = dib0700_rc_keys, diff --git a/drivers/media/dvb/dvb-usb/dvb-usb-ids.h b/drivers/media/dvb/dvb-usb/dvb-usb-ids.h index 7bf5a1c..8926db2 100644 --- a/drivers/media/dvb/dvb-usb/dvb-usb-ids.h +++ b/drivers/media/dvb/dvb-usb/dvb-usb-ids.h @@ -223,6 +223,7 @@ #define USB_PID_GIGABYTE_U7000 0x7001 #define USB_PID_GIGABYTE_U8000 0x7002 #define USB_PID_ASUS_U3000 0x171f +#define USB_PID_ASUS_U3000H 0x1736 #define USB_PID_ASUS_U3100 0x173f #define USB_PID_YUAN_EC372S 0x1edc #define USB_PID_YUAN_STK7700PH 0x1f08 -- cgit v0.10.2 From cb22cb5213192d2c0baaeec0ae4961e268916419 Mon Sep 17 00:00:00 2001 From: Devin Heitmueller Date: Mon, 8 Sep 2008 05:42:42 -0300 Subject: V4L/DVB (9044): Add support for Pinnacle PCTV HD Pro 801e (ATSC only) Add digital support for the Pinnacle PCTV HD Pro 801e (usb id 2304:023a) Thanks to Patrick Boettcher for providing new firmware fixing the issue with the i2c that prevented the xc5000 from working. Signed-off-by: Devin Heitmueller Signed-off-by: Patrick Boettcher Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/dvb/dvb-usb/dib0700.h b/drivers/media/dvb/dvb-usb/dib0700.h index cc0c51d..7391939 100644 --- a/drivers/media/dvb/dvb-usb/dib0700.h +++ b/drivers/media/dvb/dvb-usb/dib0700.h @@ -42,6 +42,7 @@ struct dib0700_state { u8 rc_counter; u8 is_dib7000pc; u8 fw_use_new_i2c_api; + u8 disable_streaming_master_mode; }; extern int dib0700_set_gpio(struct dvb_usb_device *, enum dib07x0_gpios gpio, u8 gpio_dir, u8 gpio_val); diff --git a/drivers/media/dvb/dvb-usb/dib0700_core.c b/drivers/media/dvb/dvb-usb/dib0700_core.c index 4daac86..dd53cee 100644 --- a/drivers/media/dvb/dvb-usb/dib0700_core.c +++ b/drivers/media/dvb/dvb-usb/dib0700_core.c @@ -350,7 +350,12 @@ int dib0700_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff) b[0] = REQUEST_ENABLE_VIDEO; b[1] = (onoff << 4) | 0x00; /* this bit gives a kind of command, rather than enabling something or not */ - b[2] = (0x01 << 4); /* Master mode */ + + if (st->disable_streaming_master_mode == 1) + b[2] = 0x00; + else + b[2] = (0x01 << 4); /* Master mode */ + b[3] = 0x00; deb_info("modifying (%d) streaming state for %d\n", onoff, adap->id); diff --git a/drivers/media/dvb/dvb-usb/dib0700_devices.c b/drivers/media/dvb/dvb-usb/dib0700_devices.c index d08cd45..7d9efd7 100644 --- a/drivers/media/dvb/dvb-usb/dib0700_devices.c +++ b/drivers/media/dvb/dvb-usb/dib0700_devices.c @@ -14,6 +14,8 @@ #include "mt2060.h" #include "mt2266.h" #include "tuner-xc2028.h" +#include "xc5000.h" +#include "s5h1411.h" #include "dib0070.h" static int force_lna_activation; @@ -1078,6 +1080,89 @@ static int stk7070pd_frontend_attach1(struct dvb_usb_adapter *adap) return adap->fe == NULL ? -ENODEV : 0; } +/* S5H1411 */ +static struct s5h1411_config pinnacle_801e_config = { + .output_mode = S5H1411_PARALLEL_OUTPUT, + .gpio = S5H1411_GPIO_OFF, + .mpeg_timing = S5H1411_MPEGTIMING_NONCONTINOUS_NONINVERTING_CLOCK, + .qam_if = S5H1411_IF_44000, + .vsb_if = S5H1411_IF_44000, + .inversion = S5H1411_INVERSION_OFF, + .status_mode = S5H1411_DEMODLOCKING +}; + +/* Pinnacle PCTV HD Pro 801e GPIOs map: + GPIO0 - currently unknown + GPIO1 - xc5000 tuner reset + GPIO2 - CX25843 sleep + GPIO3 - currently unknown + GPIO4 - currently unknown + GPIO6 - currently unknown + GPIO7 - currently unknown + GPIO9 - currently unknown + GPIO10 - CX25843 reset + */ +static int s5h1411_frontend_attach(struct dvb_usb_adapter *adap) +{ + struct dib0700_state *st = adap->dev->priv; + + /* Make use of the new i2c functions from FW 1.20 */ + st->fw_use_new_i2c_api = 1; + + /* The s5h1411 requires the dib0700 to not be in master mode */ + st->disable_streaming_master_mode = 1; + + /* All msleep values taken from Windows USB trace */ + dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 0); + dib0700_set_gpio(adap->dev, GPIO3, GPIO_OUT, 0); + dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1); + msleep(400); + dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0); + msleep(60); + dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1); + msleep(30); + dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1); + dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1); + dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1); + dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1); + dib0700_set_gpio(adap->dev, GPIO2, GPIO_OUT, 0); + msleep(30); + + /* Put the CX25843 to sleep for now since we're in digital mode */ + dib0700_set_gpio(adap->dev, GPIO2, GPIO_OUT, 1); + + /* GPIOs are initialized, do the attach */ + adap->fe = dvb_attach(s5h1411_attach, &pinnacle_801e_config, + &adap->dev->i2c_adap); + return adap->fe == NULL ? -ENODEV : 0; +} + +int dib0700_xc5000_tuner_callback(void *priv, int command, int arg) +{ + struct dvb_usb_adapter *adap = priv; + + /* Reset the tuner */ + dib0700_set_gpio(adap->dev, GPIO1, GPIO_OUT, 0); + msleep(330); /* from Windows USB trace */ + dib0700_set_gpio(adap->dev, GPIO1, GPIO_OUT, 1); + msleep(330); /* from Windows USB trace */ + + return 0; +} + +static struct xc5000_config s5h1411_xc5000_tunerconfig = { + .i2c_address = 0x64, + .if_khz = 5380, + .tuner_callback = dib0700_xc5000_tuner_callback +}; + +static int xc5000_tuner_attach(struct dvb_usb_adapter *adap) +{ + return dvb_attach(xc5000_attach, adap->fe, &adap->dev->i2c_adap, + &s5h1411_xc5000_tunerconfig, adap) + == NULL ? -ENODEV : 0; +} + /* DVB-USB and USB stuff follows */ struct usb_device_id dib0700_usb_id_table[] = { /* 0 */ { USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_STK7700P) }, @@ -1122,6 +1207,7 @@ struct usb_device_id dib0700_usb_id_table[] = { { USB_DEVICE(USB_VID_GIGABYTE, USB_PID_GIGABYTE_U8000) }, { USB_DEVICE(USB_VID_YUAN, USB_PID_YUAN_STK7700PH) }, { USB_DEVICE(USB_VID_ASUS, USB_PID_ASUS_U3000H) }, +/* 40 */{ USB_DEVICE(USB_VID_PINNACLE, USB_PID_PINNACLE_PCTV801E) }, { 0 } /* Terminating entry */ }; MODULE_DEVICE_TABLE(usb, dib0700_usb_id_table); @@ -1442,6 +1528,31 @@ struct dvb_usb_device_properties dib0700_devices[] = { .rc_key_map = dib0700_rc_keys, .rc_key_map_size = ARRAY_SIZE(dib0700_rc_keys), .rc_query = dib0700_rc_query + }, { DIB0700_DEFAULT_DEVICE_PROPERTIES, + .num_adapters = 1, + .adapter = { + { + .frontend_attach = s5h1411_frontend_attach, + .tuner_attach = xc5000_tuner_attach, + + DIB0700_DEFAULT_STREAMING_CONFIG(0x02), + + .size_of_priv = sizeof(struct + dib0700_adapter_state), + }, + }, + + .num_device_descs = 1, + .devices = { + { "Pinnacle PCTV HD Pro USB Stick", + { &dib0700_usb_id_table[40], NULL }, + { NULL }, + }, + }, + .rc_interval = DEFAULT_RC_INTERVAL, + .rc_key_map = dib0700_rc_keys, + .rc_key_map_size = ARRAY_SIZE(dib0700_rc_keys), + .rc_query = dib0700_rc_query }, }; diff --git a/drivers/media/dvb/dvb-usb/dvb-usb-ids.h b/drivers/media/dvb/dvb-usb/dvb-usb-ids.h index 8926db2..38a23be 100644 --- a/drivers/media/dvb/dvb-usb/dvb-usb-ids.h +++ b/drivers/media/dvb/dvb-usb/dvb-usb-ids.h @@ -171,6 +171,7 @@ #define USB_PID_PINNACLE_PCTV71E 0x022b #define USB_PID_PINNACLE_PCTV72E 0x0236 #define USB_PID_PINNACLE_PCTV73E 0x0237 +#define USB_PID_PINNACLE_PCTV801E 0x023a #define USB_PID_PCTV_200E 0x020e #define USB_PID_PCTV_400E 0x020f #define USB_PID_PCTV_450E 0x0222 -- cgit v0.10.2 From a58843743ca0a774fbfc551adb2e5ecd04d96079 Mon Sep 17 00:00:00 2001 From: Devin Heitmueller Date: Thu, 25 Sep 2008 06:21:11 -0300 Subject: V4L/DVB (9045): Add Pinnacle 801e dependencies to KConfig Support for the Pinnacle PCTV HD Pro 801e creates a dib0700 dependency on the xc5000 tuner and s5h1411 demodulator drivers. Update KConfig accordingly. Signed-off-by: Devin Heitmueller Signed-off-by: Patrick Boettcher Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/dvb/dvb-usb/Kconfig b/drivers/media/dvb/dvb-usb/Kconfig index aee3b5d..5880f2d4 100644 --- a/drivers/media/dvb/dvb-usb/Kconfig +++ b/drivers/media/dvb/dvb-usb/Kconfig @@ -72,9 +72,11 @@ config DVB_USB_DIB0700 select DVB_DIB7000P select DVB_DIB7000M select DVB_DIB3000MC + select DVB_S5H1411 if !DVB_FE_CUSTOMISE select MEDIA_TUNER_MT2060 if !DVB_FE_CUSTOMISE select MEDIA_TUNER_MT2266 if !DVB_FE_CUSTOMISE select MEDIA_TUNER_XC2028 if !DVB_FE_CUSTOMISE + select MEDIA_TUNER_XC5000 if !DVB_FE_CUSTOMIZE select DVB_TUNER_DIB0070 help Support for USB2.0/1.1 DVB receivers based on the DiB0700 USB bridge. The -- cgit v0.10.2 From d2fc3bfcc3abd14ffd1191b37d2809e780919ef4 Mon Sep 17 00:00:00 2001 From: Devin Heitmueller Date: Thu, 25 Sep 2008 06:22:23 -0300 Subject: V4L/DVB (9046): Add support for Non-Pro version of Pinnacle PCTV HD USB Stick Add USB ID for Pinnacle PCTV HD USB Stick. According to the USB trace and photos, the only difference is the removal of the port for the analog S-video/audio input. Thanks to Mike Pringle for providing the USB trace of the device starting up, and testing the support. Signed-off-by: Devin Heitmueller Signed-off-by: Patrick Boettcher Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/dvb/dvb-usb/dib0700_devices.c b/drivers/media/dvb/dvb-usb/dib0700_devices.c index 7d9efd7..7e692b3 100644 --- a/drivers/media/dvb/dvb-usb/dib0700_devices.c +++ b/drivers/media/dvb/dvb-usb/dib0700_devices.c @@ -1208,6 +1208,7 @@ struct usb_device_id dib0700_usb_id_table[] = { { USB_DEVICE(USB_VID_YUAN, USB_PID_YUAN_STK7700PH) }, { USB_DEVICE(USB_VID_ASUS, USB_PID_ASUS_U3000H) }, /* 40 */{ USB_DEVICE(USB_VID_PINNACLE, USB_PID_PINNACLE_PCTV801E) }, + { USB_DEVICE(USB_VID_PINNACLE, USB_PID_PINNACLE_PCTV801E_SE) }, { 0 } /* Terminating entry */ }; MODULE_DEVICE_TABLE(usb, dib0700_usb_id_table); @@ -1542,12 +1543,16 @@ struct dvb_usb_device_properties dib0700_devices[] = { }, }, - .num_device_descs = 1, + .num_device_descs = 2, .devices = { { "Pinnacle PCTV HD Pro USB Stick", { &dib0700_usb_id_table[40], NULL }, { NULL }, }, + { "Pinnacle PCTV HD USB Stick", + { &dib0700_usb_id_table[41], NULL }, + { NULL }, + }, }, .rc_interval = DEFAULT_RC_INTERVAL, .rc_key_map = dib0700_rc_keys, diff --git a/drivers/media/dvb/dvb-usb/dvb-usb-ids.h b/drivers/media/dvb/dvb-usb/dvb-usb-ids.h index 38a23be..dfaf1d2 100644 --- a/drivers/media/dvb/dvb-usb/dvb-usb-ids.h +++ b/drivers/media/dvb/dvb-usb/dvb-usb-ids.h @@ -172,6 +172,7 @@ #define USB_PID_PINNACLE_PCTV72E 0x0236 #define USB_PID_PINNACLE_PCTV73E 0x0237 #define USB_PID_PINNACLE_PCTV801E 0x023a +#define USB_PID_PINNACLE_PCTV801E_SE 0x023b #define USB_PID_PCTV_200E 0x020e #define USB_PID_PCTV_400E 0x020f #define USB_PID_PCTV_450E 0x0222 -- cgit v0.10.2 From 48aa739164ca6430b8b1da12ea367b44bb14ce82 Mon Sep 17 00:00:00 2001 From: Chris Rankin Date: Thu, 25 Sep 2008 06:52:24 -0300 Subject: V4L/DVB (9047): [PATCH] Add remote control support to Nova-TD (52009) This patch adds remote control support for the Hauppauge WinTV Nova-TD (Diversity) model. (That's the 52009 version.) It also adds the key-codes for the credit-card style remote control that comes with this particular adapter. Signed-off-by: Chris Rankin Signed-off-by: Patrick Boettcher Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/dvb/dvb-usb/dib0700_devices.c b/drivers/media/dvb/dvb-usb/dib0700_devices.c index 7e692b3..565563e 100644 --- a/drivers/media/dvb/dvb-usb/dib0700_devices.c +++ b/drivers/media/dvb/dvb-usb/dib0700_devices.c @@ -679,6 +679,43 @@ static struct dvb_usb_rc_key dib0700_rc_keys[] = { { 0x01, 0x7d, KEY_VOLUMEDOWN }, { 0x02, 0x42, KEY_CHANNELUP }, { 0x00, 0x7d, KEY_CHANNELDOWN }, + + /* Key codes for Nova-TD "credit card" remote control. */ + { 0x1d, 0x00, KEY_0 }, + { 0x1d, 0x01, KEY_1 }, + { 0x1d, 0x02, KEY_2 }, + { 0x1d, 0x03, KEY_3 }, + { 0x1d, 0x04, KEY_4 }, + { 0x1d, 0x05, KEY_5 }, + { 0x1d, 0x06, KEY_6 }, + { 0x1d, 0x07, KEY_7 }, + { 0x1d, 0x08, KEY_8 }, + { 0x1d, 0x09, KEY_9 }, + { 0x1d, 0x0a, KEY_TEXT }, + { 0x1d, 0x0d, KEY_MENU }, + { 0x1d, 0x0f, KEY_MUTE }, + { 0x1d, 0x10, KEY_VOLUMEUP }, + { 0x1d, 0x11, KEY_VOLUMEDOWN }, + { 0x1d, 0x12, KEY_CHANNEL }, + { 0x1d, 0x14, KEY_UP }, + { 0x1d, 0x15, KEY_DOWN }, + { 0x1d, 0x16, KEY_LEFT }, + { 0x1d, 0x17, KEY_RIGHT }, + { 0x1d, 0x1c, KEY_TV }, + { 0x1d, 0x1e, KEY_NEXT }, + { 0x1d, 0x1f, KEY_BACK }, + { 0x1d, 0x20, KEY_CHANNELUP }, + { 0x1d, 0x21, KEY_CHANNELDOWN }, + { 0x1d, 0x24, KEY_LAST }, + { 0x1d, 0x25, KEY_OK }, + { 0x1d, 0x30, KEY_PAUSE }, + { 0x1d, 0x32, KEY_REWIND }, + { 0x1d, 0x34, KEY_FASTFORWARD }, + { 0x1d, 0x35, KEY_PLAY }, + { 0x1d, 0x36, KEY_STOP }, + { 0x1d, 0x37, KEY_RECORD }, + { 0x1d, 0x3b, KEY_GOTO }, + { 0x1d, 0x3d, KEY_POWER }, }; /* STK7700P: Hauppauge Nova-T Stick, AVerMedia Volar */ @@ -1383,7 +1420,12 @@ struct dvb_usb_device_properties dib0700_devices[] = { { &dib0700_usb_id_table[31], NULL }, { NULL }, } - } + }, + + .rc_interval = DEFAULT_RC_INTERVAL, + .rc_key_map = dib0700_rc_keys, + .rc_key_map_size = ARRAY_SIZE(dib0700_rc_keys), + .rc_query = dib0700_rc_query }, { DIB0700_DEFAULT_DEVICE_PROPERTIES, .num_adapters = 1, -- cgit v0.10.2 From ebb8d68a5c8c236acd8e8cf8f0d6046e027a8e21 Mon Sep 17 00:00:00 2001 From: Michael Krufky Date: Wed, 10 Sep 2008 01:39:20 -0300 Subject: V4L/DVB (9048): add a general-purpose callback pointer to struct dvb_frontend Remove tuner_callback pointers from tuner driver configuration and private state structures, replaced with a general-purpose callback pointer within struct dvb_frontend. A new parameter is added to the callback function, called component. This allows us to use this callback pointer by frontend components other than the tuner, if need be. So far, this is only used by tuner drivers. Signed-off-by: Michael Krufky Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/dvb/dvb-core/dvb_frontend.h b/drivers/media/dvb/dvb-core/dvb_frontend.h index 1c57540..3055301 100644 --- a/drivers/media/dvb/dvb-core/dvb_frontend.h +++ b/drivers/media/dvb/dvb-core/dvb_frontend.h @@ -220,6 +220,8 @@ struct dvb_frontend { void *sec_priv; void *analog_demod_priv; struct dtv_frontend_properties dtv_property_cache; +#define DVB_FRONTEND_COMPONENT_TUNER 0 + int (*callback)(void *adapter_priv, int component, int cmd, int arg); }; extern int dvb_register_frontend(struct dvb_adapter *dvb, -- cgit v0.10.2 From d7cba043d7ec840d67bd5143779d1febe7d83407 Mon Sep 17 00:00:00 2001 From: Michael Krufky Date: Fri, 12 Sep 2008 13:31:45 -0300 Subject: V4L/DVB (9049): convert tuner drivers to use dvb_frontend->callback Signed-off-by: Michael Krufky Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/common/tuners/tda827x.c b/drivers/media/common/tuners/tda827x.c index 8555d9c..4a74f65 100644 --- a/drivers/media/common/tuners/tda827x.c +++ b/drivers/media/common/tuners/tda827x.c @@ -447,17 +447,19 @@ static void tda827xa_lna_gain(struct dvb_frontend *fe, int high, else arg = 0; } - if (priv->cfg->tuner_callback) - priv->cfg->tuner_callback(priv->i2c_adap->algo_data, - gp_func, arg); + if (fe->callback) + fe->callback(priv->i2c_adap->algo_data, + DVB_FRONTEND_COMPONENT_TUNER, + gp_func, arg); buf[1] = high ? 0 : 1; if (priv->cfg->config == 2) buf[1] = high ? 1 : 0; i2c_transfer(priv->i2c_adap, &msg, 1); break; case 3: /* switch with GPIO of saa713x */ - if (priv->cfg->tuner_callback) - priv->cfg->tuner_callback(priv->i2c_adap->algo_data, 0, high); + if (fe->callback) + fe->callback(priv->i2c_adap->algo_data, + DVB_FRONTEND_COMPONENT_TUNER, 0, high); break; } } diff --git a/drivers/media/common/tuners/tda827x.h b/drivers/media/common/tuners/tda827x.h index 7850a9a..7d72ce0 100644 --- a/drivers/media/common/tuners/tda827x.h +++ b/drivers/media/common/tuners/tda827x.h @@ -36,7 +36,6 @@ struct tda827x_config /* interface to tda829x driver */ unsigned int config; int switch_addr; - int (*tuner_callback) (void *dev, int command, int arg); void (*agcf)(struct dvb_frontend *fe); }; diff --git a/drivers/media/common/tuners/tda8290.c b/drivers/media/common/tuners/tda8290.c index 91204d3..c112bdd 100644 --- a/drivers/media/common/tuners/tda8290.c +++ b/drivers/media/common/tuners/tda8290.c @@ -672,10 +672,8 @@ struct dvb_frontend *tda829x_attach(struct dvb_frontend *fe, priv->i2c_props.addr = i2c_addr; priv->i2c_props.adap = i2c_adap; priv->i2c_props.name = "tda829x"; - if (cfg) { + if (cfg) priv->cfg.config = cfg->lna_cfg; - priv->cfg.tuner_callback = cfg->tuner_callback; - } if (tda8290_probe(&priv->i2c_props) == 0) { priv->ver = TDA8290; diff --git a/drivers/media/common/tuners/tda8290.h b/drivers/media/common/tuners/tda8290.h index aa074f3..7e288b2 100644 --- a/drivers/media/common/tuners/tda8290.h +++ b/drivers/media/common/tuners/tda8290.h @@ -22,7 +22,6 @@ struct tda829x_config { unsigned int lna_cfg; - int (*tuner_callback) (void *dev, int command, int arg); unsigned int probe_tuner:1; #define TDA829X_PROBE_TUNER 0 diff --git a/drivers/media/common/tuners/tuner-xc2028.c b/drivers/media/common/tuners/tuner-xc2028.c index 4dd1d24..fc82d15 100644 --- a/drivers/media/common/tuners/tuner-xc2028.c +++ b/drivers/media/common/tuners/tuner-xc2028.c @@ -71,9 +71,6 @@ struct firmware_properties { struct xc2028_data { struct list_head hybrid_tuner_instance_list; struct tuner_i2c_props i2c_props; - int (*tuner_callback) (void *dev, - int command, int arg); - void *video_dev; __u32 frequency; struct firmware_description *firm; @@ -492,6 +489,23 @@ ret: return i; } +static inline int do_tuner_callback(struct dvb_frontend *fe, int cmd, int arg) +{ + struct xc2028_data *priv = fe->tuner_priv; + + /* analog side (tuner-core) uses i2c_adap->algo_data. + * digital side is not guaranteed to have algo_data defined. + * + * digital side will always have fe->dvb defined. + * analog side (tuner-core) doesn't (yet) define fe->dvb. + */ + + return (!fe->callback) ? -EINVAL : + fe->callback(((fe->dvb) && (fe->dvb->priv)) ? + fe->dvb->priv : priv->i2c_props.adap->algo_data, + DVB_FRONTEND_COMPONENT_TUNER, cmd, arg); +} + static int load_firmware(struct dvb_frontend *fe, unsigned int type, v4l2_std_id *id) { @@ -530,8 +544,7 @@ static int load_firmware(struct dvb_frontend *fe, unsigned int type, if (!size) { /* Special callback command received */ - rc = priv->tuner_callback(priv->video_dev, - XC2028_TUNER_RESET, 0); + rc = do_tuner_callback(fe, XC2028_TUNER_RESET, 0); if (rc < 0) { tuner_err("Error at RESET code %d\n", (*p) & 0x7f); @@ -542,8 +555,7 @@ static int load_firmware(struct dvb_frontend *fe, unsigned int type, if (size >= 0xff00) { switch (size) { case 0xff00: - rc = priv->tuner_callback(priv->video_dev, - XC2028_RESET_CLK, 0); + rc = do_tuner_callback(fe, XC2028_RESET_CLK, 0); if (rc < 0) { tuner_err("Error at RESET code %d\n", (*p) & 0x7f); @@ -715,8 +727,7 @@ retry: memset(&priv->cur_fw, 0, sizeof(priv->cur_fw)); /* Reset is needed before loading firmware */ - rc = priv->tuner_callback(priv->video_dev, - XC2028_TUNER_RESET, 0); + rc = do_tuner_callback(fe, XC2028_TUNER_RESET, 0); if (rc < 0) goto fail; @@ -933,7 +944,7 @@ static int generic_set_freq(struct dvb_frontend *fe, u32 freq /* in HZ */, The reset CLK is needed only with tm6000. Driver should work fine even if this fails. */ - priv->tuner_callback(priv->video_dev, XC2028_RESET_CLK, 1); + do_tuner_callback(fe, XC2028_RESET_CLK, 1); msleep(10); @@ -1177,20 +1188,10 @@ struct dvb_frontend *xc2028_attach(struct dvb_frontend *fe, break; case 1: /* new tuner instance */ - priv->tuner_callback = cfg->callback; priv->ctrl.max_len = 13; mutex_init(&priv->lock); - /* analog side (tuner-core) uses i2c_adap->algo_data. - * digital side is not guaranteed to have algo_data defined. - * - * digital side will always have fe->dvb defined. - * analog side (tuner-core) doesn't (yet) define fe->dvb. - */ - priv->video_dev = ((fe->dvb) && (fe->dvb->priv)) ? - fe->dvb->priv : cfg->i2c_adap->algo_data; - fe->tuner_priv = priv; break; case 2: diff --git a/drivers/media/common/tuners/tuner-xc2028.h b/drivers/media/common/tuners/tuner-xc2028.h index 2c5b628..1af69f4 100644 --- a/drivers/media/common/tuners/tuner-xc2028.h +++ b/drivers/media/common/tuners/tuner-xc2028.h @@ -39,9 +39,7 @@ struct xc2028_ctrl { struct xc2028_config { struct i2c_adapter *i2c_adap; u8 i2c_addr; - void *video_dev; struct xc2028_ctrl *ctrl; - int (*callback) (void *dev, int command, int arg); }; /* xc2028 commands for callback */ diff --git a/drivers/media/common/tuners/xc5000.c b/drivers/media/common/tuners/xc5000.c index ccc4dae..f9c2bb9 100644 --- a/drivers/media/common/tuners/xc5000.c +++ b/drivers/media/common/tuners/xc5000.c @@ -58,8 +58,6 @@ struct xc5000_priv { u32 bandwidth; u8 video_standard; u8 rf_mode; - - int (*tuner_callback) (void *priv, int command, int arg); }; /* Misc Defines */ @@ -232,10 +230,11 @@ static void xc5000_TunerReset(struct dvb_frontend *fe) dprintk(1, "%s()\n", __func__); - if (priv->tuner_callback) { - ret = priv->tuner_callback(((fe->dvb) && (fe->dvb->priv)) ? + if (fe->callback) { + ret = fe->callback(((fe->dvb) && (fe->dvb->priv)) ? fe->dvb->priv : priv->i2c_props.adap->algo_data, + DVB_FRONTEND_COMPONENT_TUNER, XC5000_TUNER_RESET, 0); if (ret) printk(KERN_ERR "xc5000: reset failed\n"); @@ -975,7 +974,6 @@ struct dvb_frontend *xc5000_attach(struct dvb_frontend *fe, /* new tuner instance */ priv->bandwidth = BANDWIDTH_6_MHZ; priv->if_khz = cfg->if_khz; - priv->tuner_callback = cfg->tuner_callback; fe->tuner_priv = priv; break; diff --git a/drivers/media/common/tuners/xc5000.h b/drivers/media/common/tuners/xc5000.h index fa0321c..cf1a558 100644 --- a/drivers/media/common/tuners/xc5000.h +++ b/drivers/media/common/tuners/xc5000.h @@ -30,8 +30,6 @@ struct i2c_adapter; struct xc5000_config { u8 i2c_address; u32 if_khz; - - int (*tuner_callback) (void *priv, int command, int arg); }; /* xc5000 callback command */ diff --git a/drivers/media/dvb/dvb-usb/cxusb.c b/drivers/media/dvb/dvb-usb/cxusb.c index 1a74612..406d7fb 100644 --- a/drivers/media/dvb/dvb-usb/cxusb.c +++ b/drivers/media/dvb/dvb-usb/cxusb.c @@ -742,7 +742,8 @@ static int cxusb_lgh064f_tuner_attach(struct dvb_usb_adapter *adap) return 0; } -static int dvico_bluebird_xc2028_callback(void *ptr, int command, int arg) +static int dvico_bluebird_xc2028_callback(void *ptr, int component, + int command, int arg) { struct dvb_usb_adapter *adap = ptr; struct dvb_usb_device *d = adap->dev; @@ -770,7 +771,6 @@ static int cxusb_dvico_xc3028_tuner_attach(struct dvb_usb_adapter *adap) struct xc2028_config cfg = { .i2c_adap = &adap->dev->i2c_adap, .i2c_addr = 0x61, - .callback = dvico_bluebird_xc2028_callback, }; static struct xc2028_ctrl ctl = { .fname = XC2028_DEFAULT_FIRMWARE, @@ -778,6 +778,9 @@ static int cxusb_dvico_xc3028_tuner_attach(struct dvb_usb_adapter *adap) .demod = XC3028_FE_ZARLINK456, }; + /* FIXME: generalize & move to common area */ + adap->fe->callback = dvico_bluebird_xc2028_callback; + fe = dvb_attach(xc2028_attach, adap->fe, &cfg); if (fe == NULL || fe->ops.tuner_ops.set_config == NULL) return -EIO; diff --git a/drivers/media/dvb/dvb-usb/dib0700_devices.c b/drivers/media/dvb/dvb-usb/dib0700_devices.c index 565563e..8b74e13 100644 --- a/drivers/media/dvb/dvb-usb/dib0700_devices.c +++ b/drivers/media/dvb/dvb-usb/dib0700_devices.c @@ -368,7 +368,8 @@ static struct dib7000p_config stk7700ph_dib7700_xc3028_config = { .gpio_pwm_pos = DIB7000P_GPIO_DEFAULT_PWM_POS, }; -static int stk7700ph_xc3028_callback(void *ptr, int command, int arg) +static int stk7700ph_xc3028_callback(void *ptr, int component, + int command, int arg) { struct dvb_usb_adapter *adap = ptr; @@ -396,7 +397,6 @@ static struct xc2028_ctrl stk7700ph_xc3028_ctrl = { static struct xc2028_config stk7700ph_xc3028_config = { .i2c_addr = 0x61, - .callback = stk7700ph_xc3028_callback, .ctrl = &stk7700ph_xc3028_ctrl, }; @@ -437,7 +437,9 @@ static int stk7700ph_tuner_attach(struct dvb_usb_adapter *adap) DIBX000_I2C_INTERFACE_TUNER, 1); stk7700ph_xc3028_config.i2c_adap = tun_i2c; - stk7700ph_xc3028_config.video_dev = adap; + + /* FIXME: generalize & move to common area */ + adap->fe->callback = stk7700ph_xc3028_callback; return dvb_attach(xc2028_attach, adap->fe, &stk7700ph_xc3028_config) == NULL ? -ENODEV : 0; diff --git a/drivers/media/video/au0828/au0828-cards.c b/drivers/media/video/au0828/au0828-cards.c index ed48908..5f07a8a 100644 --- a/drivers/media/video/au0828/au0828-cards.c +++ b/drivers/media/video/au0828/au0828-cards.c @@ -46,7 +46,7 @@ struct au0828_board au0828_boards[] = { /* Tuner callback function for au0828 boards. Currently only needed * for HVR1500Q, which has an xc5000 tuner. */ -int au0828_tuner_callback(void *priv, int command, int arg) +int au0828_tuner_callback(void *priv, int component, int command, int arg) { struct au0828_dev *dev = priv; diff --git a/drivers/media/video/au0828/au0828-dvb.c b/drivers/media/video/au0828/au0828-dvb.c index 9624695..a52abce 100644 --- a/drivers/media/video/au0828/au0828-dvb.c +++ b/drivers/media/video/au0828/au0828-dvb.c @@ -53,7 +53,6 @@ static struct au8522_config hauppauge_woodbury_config = { static struct xc5000_config hauppauge_hvr950q_tunerconfig = { .i2c_address = 0x61, .if_khz = 6000, - .tuner_callback = au0828_tuner_callback }; static struct mxl5007t_config mxl5007t_hvr950q_config = { @@ -389,6 +388,8 @@ int au0828_dvb_register(struct au0828_dev *dev) __func__); return -1; } + /* define general-purpose callback pointer */ + dvb->frontend->callback = au0828_tuner_callback; /* register everything */ ret = dvb_register(dev); diff --git a/drivers/media/video/au0828/au0828.h b/drivers/media/video/au0828/au0828.h index 4f10ff3..9d6a116 100644 --- a/drivers/media/video/au0828/au0828.h +++ b/drivers/media/video/au0828/au0828.h @@ -103,7 +103,8 @@ extern int au0828_debug; extern struct au0828_board au0828_boards[]; extern struct usb_device_id au0828_usb_id_table[]; extern void au0828_gpio_setup(struct au0828_dev *dev); -extern int au0828_tuner_callback(void *priv, int command, int arg); +extern int au0828_tuner_callback(void *priv, int component, + int command, int arg); extern void au0828_card_setup(struct au0828_dev *dev); /* ----------------------------------------------------------- */ diff --git a/drivers/media/video/cx18/cx18-gpio.c b/drivers/media/video/cx18/cx18-gpio.c index 3bdffbf..0e56042 100644 --- a/drivers/media/video/cx18/cx18-gpio.c +++ b/drivers/media/video/cx18/cx18-gpio.c @@ -152,7 +152,7 @@ void cx18_gpio_init(struct cx18 *cx) } /* Xceive tuner reset function */ -int cx18_reset_tuner_gpio(void *dev, int cmd, int value) +int cx18_reset_tuner_gpio(void *dev, int component, int cmd, int value) { struct i2c_algo_bit_data *algo = dev; struct cx18_i2c_algo_callback_data *cb_data = algo->data; diff --git a/drivers/media/video/cx18/cx18-gpio.h b/drivers/media/video/cx18/cx18-gpio.h index 22cd7dd..beb7424 100644 --- a/drivers/media/video/cx18/cx18-gpio.h +++ b/drivers/media/video/cx18/cx18-gpio.h @@ -23,5 +23,5 @@ void cx18_gpio_init(struct cx18 *cx); void cx18_reset_i2c_slaves_gpio(struct cx18 *cx); void cx18_reset_ir_gpio(void *data); -int cx18_reset_tuner_gpio(void *dev, int cmd, int value); +int cx18_reset_tuner_gpio(void *dev, int component, int cmd, int value); int cx18_gpio(struct cx18 *cx, unsigned int command, void *arg); diff --git a/drivers/media/video/cx23885/cx23885-cards.c b/drivers/media/video/cx23885/cx23885-cards.c index ccea8de..2cda15f 100644 --- a/drivers/media/video/cx23885/cx23885-cards.c +++ b/drivers/media/video/cx23885/cx23885-cards.c @@ -337,7 +337,7 @@ static void hauppauge_eeprom(struct cx23885_dev *dev, u8 *eeprom_data) dev->name, tv.model); } -int cx23885_tuner_callback(void *priv, int command, int arg) +int cx23885_tuner_callback(void *priv, int component, int command, int arg) { struct cx23885_tsport *port = priv; struct cx23885_dev *dev = port->dev; diff --git a/drivers/media/video/cx23885/cx23885-dvb.c b/drivers/media/video/cx23885/cx23885-dvb.c index 3b54f13..6c5475d 100644 --- a/drivers/media/video/cx23885/cx23885-dvb.c +++ b/drivers/media/video/cx23885/cx23885-dvb.c @@ -189,13 +189,11 @@ static struct s5h1411_config dvico_s5h1411_config = { static struct xc5000_config hauppauge_hvr1500q_tunerconfig = { .i2c_address = 0x61, .if_khz = 5380, - .tuner_callback = cx23885_tuner_callback, }; static struct xc5000_config dvico_xc5000_tunerconfig = { .i2c_address = 0x64, .if_khz = 5380, - .tuner_callback = cx23885_tuner_callback, }; static struct tda829x_config tda829x_no_probe = { @@ -403,8 +401,6 @@ static int dvb_register(struct cx23885_tsport *port) struct xc2028_config cfg = { .i2c_adap = &i2c_bus->i2c_adap, .i2c_addr = 0x61, - .video_dev = port, - .callback = cx23885_tuner_callback, }; static struct xc2028_ctrl ctl = { .fname = XC2028_DEFAULT_FIRMWARE, @@ -443,8 +439,6 @@ static int dvb_register(struct cx23885_tsport *port) struct xc2028_config cfg = { .i2c_adap = &dev->i2c_bus[1].i2c_adap, .i2c_addr = 0x64, - .video_dev = port, - .callback = cx23885_tuner_callback, }; static struct xc2028_ctrl ctl = { .fname = XC3028L_DEFAULT_FIRMWARE, @@ -485,8 +479,6 @@ static int dvb_register(struct cx23885_tsport *port) struct xc2028_config cfg = { .i2c_adap = &i2c_bus->i2c_adap, .i2c_addr = 0x61, - .video_dev = port, - .callback = cx23885_tuner_callback, }; static struct xc2028_ctrl ctl = { .fname = XC2028_DEFAULT_FIRMWARE, @@ -512,8 +504,6 @@ static int dvb_register(struct cx23885_tsport *port) struct xc2028_config cfg = { .i2c_adap = &dev->i2c_bus[1].i2c_adap, .i2c_addr = 0x61, - .video_dev = port, - .callback = cx23885_tuner_callback, }; static struct xc2028_ctrl ctl = { .fname = XC2028_DEFAULT_FIRMWARE, @@ -536,6 +526,8 @@ static int dvb_register(struct cx23885_tsport *port) printk("%s: frontend initialization failed\n", dev->name); return -1; } + /* define general-purpose callback pointer */ + port->dvb.frontend->callback = cx23885_tuner_callback; /* Put the analog decoder in standby to keep it quiet */ cx23885_call_i2c_clients(i2c_bus, TUNER_SET_STANDBY, NULL); diff --git a/drivers/media/video/cx23885/cx23885.h b/drivers/media/video/cx23885/cx23885.h index 4e0fcb3..ba4e0aa 100644 --- a/drivers/media/video/cx23885/cx23885.h +++ b/drivers/media/video/cx23885/cx23885.h @@ -411,7 +411,7 @@ extern const unsigned int cx23885_bcount; extern struct cx23885_subid cx23885_subids[]; extern const unsigned int cx23885_idcount; -extern int cx23885_tuner_callback(void *priv, int command, int arg); +extern int cx23885_tuner_callback(void *priv, int component, int command, int arg); extern void cx23885_card_list(struct cx23885_dev *dev); extern int cx23885_ir_init(struct cx23885_dev *dev); extern void cx23885_gpio_setup(struct cx23885_dev *dev); diff --git a/drivers/media/video/cx88/cx88-cards.c b/drivers/media/video/cx88/cx88-cards.c index 16bb9c3..b5a2509 100644 --- a/drivers/media/video/cx88/cx88-cards.c +++ b/drivers/media/video/cx88/cx88-cards.c @@ -2308,9 +2308,21 @@ static int cx88_dvico_xc2028_callback(struct cx88_core *core, { switch (command) { case XC2028_TUNER_RESET: - cx_write(MO_GP0_IO, 0x101000); - mdelay(5); - cx_set(MO_GP0_IO, 0x101010); + switch (core->boardnr) { + case CX88_BOARD_DVICO_FUSIONHDTV_5_PCI_NANO: + /* GPIO-4 xc3028 tuner */ + + cx_set(MO_GP0_IO, 0x00001000); + cx_clear(MO_GP0_IO, 0x00000010); + msleep(100); + cx_set(MO_GP0_IO, 0x00000010); + msleep(100); + break; + default: + cx_write(MO_GP0_IO, 0x101000); + mdelay(5); + cx_set(MO_GP0_IO, 0x101010); + } break; default: return -EINVAL; @@ -2419,6 +2431,7 @@ static int cx88_xc2028_tuner_callback(struct cx88_core *core, case CX88_BOARD_PROLINK_PV_8000GT: return cx88_pv_8000gt_callback(core, command, arg); case CX88_BOARD_DVICO_FUSIONHDTV_DVB_T_PRO: + case CX88_BOARD_DVICO_FUSIONHDTV_5_PCI_NANO: return cx88_dvico_xc2028_callback(core, command, arg); } @@ -2486,7 +2499,7 @@ static int cx88_xc5000_tuner_callback(struct cx88_core *core, return 0; /* Should never be here */ } -int cx88_tuner_callback(void *priv, int command, int arg) +int cx88_tuner_callback(void *priv, int component, int command, int arg) { struct i2c_algo_bit_data *i2c_algo = priv; struct cx88_core *core; @@ -2503,6 +2516,9 @@ int cx88_tuner_callback(void *priv, int command, int arg) return -EINVAL; } + if (component != DVB_FRONTEND_COMPONENT_TUNER) + return -EINVAL; + switch (core->board.tuner_type) { case TUNER_XC2028: info_printk(core, "Calling XC2028/3028 callback\n"); diff --git a/drivers/media/video/cx88/cx88-dvb.c b/drivers/media/video/cx88/cx88-dvb.c index cd368b5..6751f36 100644 --- a/drivers/media/video/cx88/cx88-dvb.c +++ b/drivers/media/video/cx88/cx88-dvb.c @@ -405,40 +405,6 @@ static int tevii_dvbs_set_voltage(struct dvb_frontend *fe, return 0; } -static int cx88_pci_nano_callback(void *ptr, int command, int arg) -{ - struct cx88_core *core = ptr; - - switch (command) { - case XC2028_TUNER_RESET: - /* Send the tuner in then out of reset */ - dprintk(1, "%s: XC2028_TUNER_RESET %d\n", __func__, arg); - - switch (core->boardnr) { - case CX88_BOARD_DVICO_FUSIONHDTV_5_PCI_NANO: - /* GPIO-4 xc3028 tuner */ - - cx_set(MO_GP0_IO, 0x00001000); - cx_clear(MO_GP0_IO, 0x00000010); - msleep(100); - cx_set(MO_GP0_IO, 0x00000010); - msleep(100); - break; - } - - break; - case XC2028_RESET_CLK: - dprintk(1, "%s: XC2028_RESET_CLK %d\n", __func__, arg); - break; - default: - dprintk(1, "%s: unknown command %d, arg %d\n", __func__, - command, arg); - return -EINVAL; - } - - return 0; -} - static struct cx24123_config geniatech_dvbs_config = { .demod_address = 0x55, .set_ts_params = cx24123_set_ts_param, @@ -486,7 +452,6 @@ static struct s5h1409_config kworld_atsc_120_config = { static struct xc5000_config pinnacle_pctv_hd_800i_tuner_config = { .i2c_address = 0x64, .if_khz = 5380, - .tuner_callback = cx88_tuner_callback, }; static struct zl10353_config cx88_geniatech_x8000_mt = { @@ -507,7 +472,6 @@ static struct s5h1411_config dvico_fusionhdtv7_config = { static struct xc5000_config dvico_fusionhdtv7_tuner_config = { .i2c_address = 0xc2 >> 1, .if_khz = 5380, - .tuner_callback = cx88_tuner_callback, }; static int attach_xc3028(u8 addr, struct cx8802_dev *dev) @@ -518,7 +482,6 @@ static int attach_xc3028(u8 addr, struct cx8802_dev *dev) .i2c_adap = &dev->core->i2c_adap, .i2c_addr = addr, .ctrl = &ctl, - .callback = cx88_tuner_callback, }; if (!dev->dvb.frontend) { @@ -912,7 +875,6 @@ static int dvb_register(struct cx8802_dev *dev) struct xc2028_config cfg = { .i2c_adap = &core->i2c_adap, .i2c_addr = 0x61, - .callback = cx88_pci_nano_callback, }; static struct xc2028_ctrl ctl = { .fname = XC2028_DEFAULT_FIRMWARE, @@ -1035,6 +997,8 @@ static int dvb_register(struct cx8802_dev *dev) core->name); return -EINVAL; } + /* define general-purpose callback pointer */ + dev->dvb.frontend->callback = cx88_tuner_callback; /* Ensure all frontends negotiate bus access */ dev->dvb.frontend->ops.ts_bus_ctrl = cx88_dvb_bus_ctrl; diff --git a/drivers/media/video/cx88/cx88.h b/drivers/media/video/cx88/cx88.h index e17bd51..30b750e 100644 --- a/drivers/media/video/cx88/cx88.h +++ b/drivers/media/video/cx88/cx88.h @@ -607,7 +607,7 @@ extern void cx88_call_i2c_clients(struct cx88_core *core, /* ----------------------------------------------------------- */ /* cx88-cards.c */ -extern int cx88_tuner_callback(void *dev, int command, int arg); +extern int cx88_tuner_callback(void *dev, int component, int command, int arg); extern int cx88_get_resources(const struct cx88_core *core, struct pci_dev *pci); extern struct cx88_core *cx88_core_create(struct pci_dev *pci, int nr); diff --git a/drivers/media/video/em28xx/em28xx-cards.c b/drivers/media/video/em28xx/em28xx-cards.c index 01804fa..d65d057 100644 --- a/drivers/media/video/em28xx/em28xx-cards.c +++ b/drivers/media/video/em28xx/em28xx-cards.c @@ -1271,7 +1271,7 @@ static struct em28xx_hash_table em28xx_i2c_hash[] = { {0x1ba50080, EM2860_BOARD_POINTNIX_INTRAORAL_CAMERA, TUNER_ABSENT}, }; -int em28xx_tuner_callback(void *ptr, int command, int arg) +int em28xx_tuner_callback(void *ptr, int component, int command, int arg) { int rc = 0; struct em28xx *dev = ptr; diff --git a/drivers/media/video/em28xx/em28xx-dvb.c b/drivers/media/video/em28xx/em28xx-dvb.c index ea4f2a9..855ad39 100644 --- a/drivers/media/video/em28xx/em28xx-dvb.c +++ b/drivers/media/video/em28xx/em28xx-dvb.c @@ -249,7 +249,6 @@ static int attach_xc3028(u8 addr, struct em28xx *dev) memset(&cfg, 0, sizeof(cfg)); cfg.i2c_adap = &dev->i2c_adap; cfg.i2c_addr = addr; - cfg.callback = em28xx_tuner_callback; if (!dev->dvb->frontend) { printk(KERN_ERR "%s/2: dvb frontend not attached. " @@ -474,6 +473,8 @@ static int dvb_init(struct em28xx *dev) result = -EINVAL; goto out_free; } + /* define general-purpose callback pointer */ + dvb->frontend->callback = em28xx_tuner_callback; /* register everything */ result = register_dvb(dvb, THIS_MODULE, dev, &dev->udev->dev); diff --git a/drivers/media/video/em28xx/em28xx.h b/drivers/media/video/em28xx/em28xx.h index d992280..8278117 100644 --- a/drivers/media/video/em28xx/em28xx.h +++ b/drivers/media/video/em28xx/em28xx.h @@ -528,7 +528,7 @@ extern struct em28xx_board em28xx_boards[]; extern struct usb_device_id em28xx_id_table[]; extern const unsigned int em28xx_bcount; void em28xx_set_ir(struct em28xx *dev, struct IR_i2c *ir); -int em28xx_tuner_callback(void *ptr, int command, int arg); +int em28xx_tuner_callback(void *ptr, int component, int command, int arg); /* Provided by em28xx-input.c */ /* TODO: Check if the standard get_key handlers on ir-common can be used */ diff --git a/drivers/media/video/ivtv/ivtv-gpio.c b/drivers/media/video/ivtv/ivtv-gpio.c index bc22905..74a4484 100644 --- a/drivers/media/video/ivtv/ivtv-gpio.c +++ b/drivers/media/video/ivtv/ivtv-gpio.c @@ -124,7 +124,7 @@ void ivtv_reset_ir_gpio(struct ivtv *itv) } /* Xceive tuner reset function */ -int ivtv_reset_tuner_gpio(void *dev, int cmd, int value) +int ivtv_reset_tuner_gpio(void *dev, int component, int cmd, int value) { struct i2c_algo_bit_data *algo = dev; struct ivtv *itv = algo->data; diff --git a/drivers/media/video/ivtv/ivtv-gpio.h b/drivers/media/video/ivtv/ivtv-gpio.h index 964a265..48b6291 100644 --- a/drivers/media/video/ivtv/ivtv-gpio.h +++ b/drivers/media/video/ivtv/ivtv-gpio.h @@ -24,7 +24,7 @@ /* GPIO stuff */ void ivtv_gpio_init(struct ivtv *itv); void ivtv_reset_ir_gpio(struct ivtv *itv); -int ivtv_reset_tuner_gpio(void *dev, int cmd, int value); +int ivtv_reset_tuner_gpio(void *dev, int component, int cmd, int value); int ivtv_gpio(struct ivtv *itv, unsigned int command, void *arg); #endif diff --git a/drivers/media/video/saa7134/saa7134-cards.c b/drivers/media/video/saa7134/saa7134-cards.c index 3c2f09f..622d3ba 100644 --- a/drivers/media/video/saa7134/saa7134-cards.c +++ b/drivers/media/video/saa7134/saa7134-cards.c @@ -5576,7 +5576,7 @@ static int saa7134_tda8290_callback(struct saa7134_dev *dev, return 0; } -int saa7134_tuner_callback(void *priv, int command, int arg) +int saa7134_tuner_callback(void *priv, int component, int command, int arg) { struct saa7134_dev *dev = priv; if (dev != NULL) { diff --git a/drivers/media/video/saa7134/saa7134-dvb.c b/drivers/media/video/saa7134/saa7134-dvb.c index 7fa6ce7..0dd6b98 100644 --- a/drivers/media/video/saa7134/saa7134-dvb.c +++ b/drivers/media/video/saa7134/saa7134-dvb.c @@ -553,7 +553,6 @@ static int configure_tda827x_fe(struct saa7134_dev *dev, /* ------------------------------------------------------------------ */ static struct tda827x_config tda827x_cfg_0 = { - .tuner_callback = saa7134_tuner_callback, .init = philips_tda827x_tuner_init, .sleep = philips_tda827x_tuner_sleep, .config = 0, @@ -561,7 +560,6 @@ static struct tda827x_config tda827x_cfg_0 = { }; static struct tda827x_config tda827x_cfg_1 = { - .tuner_callback = saa7134_tuner_callback, .init = philips_tda827x_tuner_init, .sleep = philips_tda827x_tuner_sleep, .config = 1, @@ -569,7 +567,6 @@ static struct tda827x_config tda827x_cfg_1 = { }; static struct tda827x_config tda827x_cfg_2 = { - .tuner_callback = saa7134_tuner_callback, .init = philips_tda827x_tuner_init, .sleep = philips_tda827x_tuner_sleep, .config = 2, @@ -577,7 +574,6 @@ static struct tda827x_config tda827x_cfg_2 = { }; static struct tda827x_config tda827x_cfg_2_sw42 = { - .tuner_callback = saa7134_tuner_callback, .init = philips_tda827x_tuner_init, .sleep = philips_tda827x_tuner_sleep, .config = 2, @@ -836,7 +832,6 @@ static int ads_duo_tuner_sleep(struct dvb_frontend *fe) } static struct tda827x_config ads_duo_cfg = { - .tuner_callback = saa7134_tuner_callback, .init = ads_duo_tuner_init, .sleep = ads_duo_tuner_sleep, .config = 0 @@ -1366,6 +1361,8 @@ static int dvb_init(struct saa7134_dev *dev) printk(KERN_ERR "%s/dvb: frontend initialization failed\n", dev->name); return -1; } + /* define general-purpose callback pointer */ + dev->dvb.frontend->callback = saa7134_tuner_callback; /* register everything else */ ret = videobuf_dvb_register(&dev->dvb, THIS_MODULE, dev, &dev->pci->dev, diff --git a/drivers/media/video/saa7134/saa7134.h b/drivers/media/video/saa7134/saa7134.h index cbfdac2..4005335 100644 --- a/drivers/media/video/saa7134/saa7134.h +++ b/drivers/media/video/saa7134/saa7134.h @@ -653,7 +653,7 @@ extern struct pci_device_id __devinitdata saa7134_pci_tbl[]; extern int saa7134_board_init1(struct saa7134_dev *dev); extern int saa7134_board_init2(struct saa7134_dev *dev); -int saa7134_tuner_callback(void *priv, int command, int arg); +int saa7134_tuner_callback(void *priv, int component, int command, int arg); /* ----------------------------------------------------------- */ diff --git a/drivers/media/video/tuner-core.c b/drivers/media/video/tuner-core.c index 39c7b9b..4a7735c 100644 --- a/drivers/media/video/tuner-core.c +++ b/drivers/media/video/tuner-core.c @@ -92,7 +92,6 @@ struct tuner { unsigned int type; /* chip type id */ unsigned int config; - int (*tuner_callback) (void *dev, int command, int arg); const char *name; }; @@ -346,7 +345,7 @@ static struct xc5000_config xc5000_cfg; static void set_type(struct i2c_client *c, unsigned int type, unsigned int new_mode_mask, unsigned int new_config, - int (*tuner_callback) (void *dev, int command,int arg)) + int (*tuner_callback) (void *dev, int component, int cmd, int arg)) { struct tuner *t = i2c_get_clientdata(c); struct dvb_tuner_ops *fe_tuner_ops = &t->fe.ops.tuner_ops; @@ -362,7 +361,7 @@ static void set_type(struct i2c_client *c, unsigned int type, t->config = new_config; if (tuner_callback != NULL) { tuner_dbg("defining GPIO callback\n"); - t->tuner_callback = tuner_callback; + t->fe.callback = tuner_callback; } if (t->mode == T_UNINITIALIZED) { @@ -385,7 +384,6 @@ static void set_type(struct i2c_client *c, unsigned int type, { struct tda829x_config cfg = { .lna_cfg = t->config, - .tuner_callback = t->tuner_callback, }; if (!dvb_attach(tda829x_attach, &t->fe, t->i2c->adapter, t->i2c->addr, &cfg)) @@ -433,7 +431,6 @@ static void set_type(struct i2c_client *c, unsigned int type, struct xc2028_config cfg = { .i2c_adap = t->i2c->adapter, .i2c_addr = t->i2c->addr, - .callback = t->tuner_callback, }; if (!dvb_attach(xc2028_attach, &t->fe, &cfg)) goto attach_failed; @@ -450,7 +447,6 @@ static void set_type(struct i2c_client *c, unsigned int type, xc5000_cfg.i2c_address = t->i2c->addr; xc5000_cfg.if_khz = 5380; - xc5000_cfg.tuner_callback = t->tuner_callback; if (!dvb_attach(xc5000_attach, &t->fe, t->i2c->adapter, &xc5000_cfg)) goto attach_failed; @@ -1224,7 +1220,7 @@ register_client: } else { t->mode = V4L2_TUNER_DIGITAL_TV; } - set_type(client, t->type, t->mode_mask, t->config, t->tuner_callback); + set_type(client, t->type, t->mode_mask, t->config, t->fe.callback); list_add_tail(&t->list, &tuner_list); return 0; } diff --git a/include/media/tuner.h b/include/media/tuner.h index ba81898..67c1f51 100644 --- a/include/media/tuner.h +++ b/include/media/tuner.h @@ -179,7 +179,7 @@ struct tuner_setup { unsigned int type; /* Tuner type */ unsigned int mode_mask; /* Allowed tuner modes */ unsigned int config; /* configuraion for more complex tuners */ - int (*tuner_callback) (void *dev, int command,int arg); + int (*tuner_callback) (void *dev, int component, int cmd, int arg); }; #endif /* __KERNEL__ */ -- cgit v0.10.2 From 767f3b3bf23244d52be0492df20b0eaf14f501c5 Mon Sep 17 00:00:00 2001 From: Michael Krufky Date: Thu, 25 Sep 2008 09:47:07 -0300 Subject: V4L/DVB (9051): dib0700: use dvb_frontend->callback for xc5000 gpio reset The tuner_callback function pointer from struct xc5000_config has been removed. Use dvb_frontend->callback instead. Also, mark function dib0700_xc5000_tuner_callback as static int. Signed-off-by: Michael Krufky Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/dvb/dvb-usb/dib0700_devices.c b/drivers/media/dvb/dvb-usb/dib0700_devices.c index 8b74e13..9891ca0 100644 --- a/drivers/media/dvb/dvb-usb/dib0700_devices.c +++ b/drivers/media/dvb/dvb-usb/dib0700_devices.c @@ -1176,7 +1176,8 @@ static int s5h1411_frontend_attach(struct dvb_usb_adapter *adap) return adap->fe == NULL ? -ENODEV : 0; } -int dib0700_xc5000_tuner_callback(void *priv, int command, int arg) +static int dib0700_xc5000_tuner_callback(void *priv, int component, + int command, int arg) { struct dvb_usb_adapter *adap = priv; @@ -1192,14 +1193,16 @@ int dib0700_xc5000_tuner_callback(void *priv, int command, int arg) static struct xc5000_config s5h1411_xc5000_tunerconfig = { .i2c_address = 0x64, .if_khz = 5380, - .tuner_callback = dib0700_xc5000_tuner_callback }; static int xc5000_tuner_attach(struct dvb_usb_adapter *adap) { return dvb_attach(xc5000_attach, adap->fe, &adap->dev->i2c_adap, - &s5h1411_xc5000_tunerconfig, adap) + &s5h1411_xc5000_tunerconfig) == NULL ? -ENODEV : 0; + + /* FIXME: generalize & move to common area */ + adap->fe->callback = dib0700_xc5000_tuner_callback; } /* DVB-USB and USB stuff follows */ -- cgit v0.10.2 From 0975fc68719c75cbe14132c6f0dead57cd4d5210 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Sun, 28 Sep 2008 02:24:44 -0300 Subject: V4L/DVB (9055): tuner-xc2028: Do a better job selecting firmware type Firmware selection is very tricky on this device. This patch do a better selection of the proper firmware type, by using a code to hint if the firmware to be loaded should be D2620 or D2633. It also allows overriding the hint at the control structure. Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/common/tuners/tuner-xc2028.c b/drivers/media/common/tuners/tuner-xc2028.c index fc82d15..b65e680 100644 --- a/drivers/media/common/tuners/tuner-xc2028.c +++ b/drivers/media/common/tuners/tuner-xc2028.c @@ -1013,11 +1013,6 @@ static int xc2028_set_params(struct dvb_frontend *fe, tuner_dbg("%s called\n", __func__); - if (priv->ctrl.d2633) - type |= D2633; - else - type |= D2620; - switch(fe->ops.info.type) { case FE_OFDM: bw = p->u.ofdm.bandwidth; @@ -1032,10 +1027,8 @@ static int xc2028_set_params(struct dvb_frontend *fe, break; case FE_ATSC: bw = BANDWIDTH_6_MHZ; - /* The only ATSC firmware (at least on v2.7) is D2633, - so overrides ctrl->d2633 */ - type |= ATSC| D2633; - type &= ~D2620; + /* The only ATSC firmware (at least on v2.7) is D2633 */ + type |= ATSC | D2633; break; /* DVB-S is not supported */ default: @@ -1068,6 +1061,28 @@ static int xc2028_set_params(struct dvb_frontend *fe, tuner_err("error: bandwidth not supported.\n"); }; + /* + Selects between D2633 or D2620 firmware. + It doesn't make sense for ATSC, since it should be D2633 on all cases + */ + if (fe->ops.info.type != FE_ATSC) { + switch (priv->ctrl.type) { + case XC2028_D2633: + type |= D2633; + break; + case XC2028_D2620: + type |= D2620; + break; + case XC2028_AUTO: + default: + /* Zarlink seems to need D2633 */ + if (priv->ctrl.demod == XC3028_FE_ZARLINK456) + type |= D2633; + else + type |= D2620; + } + } + /* All S-code tables need a 200kHz shift */ if (priv->ctrl.demod) demod = priv->ctrl.demod + 200; diff --git a/drivers/media/common/tuners/tuner-xc2028.h b/drivers/media/common/tuners/tuner-xc2028.h index 1af69f4..19de792 100644 --- a/drivers/media/common/tuners/tuner-xc2028.h +++ b/drivers/media/common/tuners/tuner-xc2028.h @@ -24,16 +24,22 @@ #define XC3028_FE_ZARLINK456 4560 #define XC3028_FE_CHINA 5200 +enum firmware_type { + XC2028_AUTO = 0, /* By default, auto-detects */ + XC2028_D2633, + XC2028_D2620, +}; + struct xc2028_ctrl { char *fname; int max_len; unsigned int scode_table; unsigned int mts :1; - unsigned int d2633 :1; unsigned int input1:1; unsigned int vhfbw7:1; unsigned int uhfbw8:1; unsigned int demod; + enum firmware_type type:2; }; struct xc2028_config { diff --git a/drivers/media/video/cx23885/cx23885-dvb.c b/drivers/media/video/cx23885/cx23885-dvb.c index 6c5475d..24bd183 100644 --- a/drivers/media/video/cx23885/cx23885-dvb.c +++ b/drivers/media/video/cx23885/cx23885-dvb.c @@ -444,7 +444,8 @@ static int dvb_register(struct cx23885_tsport *port) .fname = XC3028L_DEFAULT_FIRMWARE, .max_len = 64, .demod = 5000, - .d2633 = 1 + /* This is true for all demods with v36 firmware? */ + .type = XC2028_D2633, }; fe = dvb_attach(xc2028_attach, -- cgit v0.10.2 From 8acdbcfd90a1954dcea36c2da4429c305813d470 Mon Sep 17 00:00:00 2001 From: David Bentham Date: Sun, 28 Sep 2008 16:29:51 -0300 Subject: V4L/DVB (9057): saa7134: Hauppauge HVR-1110, support for radio and analog audio in The audio switch is at 0x100 and radio on gpio 21. Tested-by: Thomas Genty Signed-off-by: David Bentham Reviewed-by: Hermann Pitton Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/saa7134/saa7134-cards.c b/drivers/media/video/saa7134/saa7134-cards.c index 622d3ba..4f32486 100644 --- a/drivers/media/video/saa7134/saa7134-cards.c +++ b/drivers/media/video/saa7134/saa7134-cards.c @@ -3260,6 +3260,7 @@ struct saa7134_board saa7134_boards[] = { }, [SAA7134_BOARD_HAUPPAUGE_HVR1110] = { /* Thomas Genty */ + /* David Bentham */ .name = "Hauppauge WinTV-HVR1110 DVB-T/Hybrid", .audio_clock = 0x00187de7, .tuner_type = TUNER_PHILIPS_TDA8290, @@ -3268,23 +3269,26 @@ struct saa7134_board saa7134_boards[] = { .radio_addr = ADDR_UNSET, .tuner_config = 1, .mpeg = SAA7134_MPEG_DVB, + .gpiomask = 0x0200100, .inputs = {{ .name = name_tv, .vmux = 1, .amux = TV, .tv = 1, - },{ - .name = name_comp1, - .vmux = 3, - .amux = LINE2, /* FIXME: audio doesn't work on svideo/composite */ - },{ - .name = name_svideo, - .vmux = 8, - .amux = LINE2, /* FIXME: audio doesn't work on svideo/composite */ - }}, + .gpio = 0x0000100, + }, { + .name = name_comp1, + .vmux = 3, + .amux = LINE1, + }, { + .name = name_svideo, + .vmux = 8, + .amux = LINE1, + } }, .radio = { .name = name_radio, - .amux = TV, + .amux = TV, + .gpio = 0x0200100, }, }, [SAA7134_BOARD_CINERGY_HT_PCMCIA] = { -- cgit v0.10.2 From 27cf8fd14e44d17b22f3591ef65d6920fb9e0409 Mon Sep 17 00:00:00 2001 From: Shane Date: Thu, 11 Sep 2008 16:14:09 -0300 Subject: V4L/DVB (9058): spca561: while balance -> white balance typo Cc: Jean-Francois Moine Cc: Hans de Goede Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/gspca/spca561.c b/drivers/media/video/gspca/spca561.c index 95fcfcb..e9b0d81 100644 --- a/drivers/media/video/gspca/spca561.c +++ b/drivers/media/video/gspca/spca561.c @@ -1064,7 +1064,7 @@ static struct ctrl sd_ctrls_12a[] = { { .id = V4L2_CID_DO_WHITE_BALANCE, .type = V4L2_CTRL_TYPE_INTEGER, - .name = "While Balance", + .name = "White Balance", .minimum = WHITE_MIN, .maximum = WHITE_MAX, .step = 1, -- cgit v0.10.2 From bf1ece6a4f30f05b227f2ec59fa0d45b5db186d2 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Thu, 26 Jun 2008 17:03:00 -0300 Subject: V4L/DVB (9059): saa7134: Add support for Encore version 5.3 board Thanks to Sistema Fenix (http://www.sistemafenix.com.br/) for sponsoring this development. Signed-off-by: Gilberto Signed-off-by: Mauro Carvalho Chehab diff --git a/Documentation/video4linux/CARDLIST.saa7134 b/Documentation/video4linux/CARDLIST.saa7134 index c121f44..1438364 100644 --- a/Documentation/video4linux/CARDLIST.saa7134 +++ b/Documentation/video4linux/CARDLIST.saa7134 @@ -146,3 +146,4 @@ 145 -> AVerMedia MiniPCI DVB-T Hybrid M103 [1461:f636] 146 -> ASUSTeK P7131 Analog 147 -> Asus Tiger 3in1 [1043:4878] +148 -> Encore ENLTV-FM v5.3 [1a7f:2008] diff --git a/drivers/media/common/ir-keymaps.c b/drivers/media/common/ir-keymaps.c index aedfabd..891f3b3 100644 --- a/drivers/media/common/ir-keymaps.c +++ b/drivers/media/common/ir-keymaps.c @@ -2288,3 +2288,46 @@ IR_KEYTAB_TYPE ir_codes_avermedia_a16d[IR_KEYTAB_SIZE] = { [0x2a] = KEY_MENU, }; EXPORT_SYMBOL_GPL(ir_codes_avermedia_a16d); + +/* Encore ENLTV-FM v5.3 + Mauro Carvalho Chehab + */ +IR_KEYTAB_TYPE ir_codes_encore_enltv_fm53[IR_KEYTAB_SIZE] = { + [0x10] = KEY_POWER2, + [0x06] = KEY_MUTE, + + [0x09] = KEY_1, + [0x1d] = KEY_2, + [0x1f] = KEY_3, + [0x19] = KEY_4, + [0x1b] = KEY_5, + [0x11] = KEY_6, + [0x17] = KEY_7, + [0x12] = KEY_8, + [0x16] = KEY_9, + [0x48] = KEY_0, + + [0x04] = KEY_LIST, /* -/-- */ + [0x40] = KEY_LAST, /* recall */ + + [0x02] = KEY_MODE, /* TV/AV */ + [0x05] = KEY_SHUFFLE, /* SNAPSHOT */ + + [0x4c] = KEY_CHANNELUP, /* UP */ + [0x00] = KEY_CHANNELDOWN, /* DOWN */ + [0x0d] = KEY_VOLUMEUP, /* RIGHT */ + [0x15] = KEY_VOLUMEDOWN, /* LEFT */ + [0x49] = KEY_ENTER, /* OK */ + + [0x54] = KEY_RECORD, + [0x4d] = KEY_PLAY, /* pause */ + + [0x1e] = KEY_UP, /* video setting */ + [0x0e] = KEY_RIGHT, /* <- */ + [0x1a] = KEY_LEFT, /* -> */ + + [0x0a] = KEY_DOWN, /* video default */ + [0x0c] = KEY_ZOOM, /* hide pannel */ + [0x47] = KEY_SLEEP, /* shutdown */ +}; +EXPORT_SYMBOL_GPL(ir_codes_encore_enltv_fm53); diff --git a/drivers/media/video/saa7134/saa7134-cards.c b/drivers/media/video/saa7134/saa7134-cards.c index 4f32486..3ad5b94 100644 --- a/drivers/media/video/saa7134/saa7134-cards.c +++ b/drivers/media/video/saa7134/saa7134-cards.c @@ -3392,6 +3392,42 @@ struct saa7134_board saa7134_boards[] = { .amux = 0, }, }, + [SAA7134_BOARD_ENCORE_ENLTV_FM53] = { + .name = "Encore ENLTV-FM v5.3", + .audio_clock = 0x00200000, + .tuner_type = TUNER_TNF_5335MF, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .gpiomask = 0x7000, + .inputs = { { + .name = name_tv, + .vmux = 1, + .amux = 1, + .tv = 1, + .gpio = 0x50000, + }, { + .name = name_comp1, + .vmux = 3, + .amux = 2, + .gpio = 0x2000, + }, { + .name = name_svideo, + .vmux = 8, + .amux = 2, + .gpio = 0x2000, + } }, + .radio = { + .name = name_radio, + .vmux = 1, + .amux = 1, + }, + .mute = { + .name = name_mute, + .gpio = 0xf000, + .amux = 0, + }, + }, [SAA7134_BOARD_CINERGY_HT_PCI] = { .name = "Terratec Cinergy HT PCI", .audio_clock = 0x00187de7, @@ -5191,6 +5227,12 @@ struct pci_device_id saa7134_pci_tbl[] = { .driver_data = SAA7134_BOARD_ENCORE_ENLTV_FM, },{ .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7130, + .subvendor = 0x1a7f, + .subdevice = 0x2008, + .driver_data = SAA7134_BOARD_ENCORE_ENLTV_FM53, + }, { + .vendor = PCI_VENDOR_ID_PHILIPS, .device = PCI_DEVICE_ID_PHILIPS_SAA7133, .subvendor = 0x153b, .subdevice = 0x1175, @@ -5684,6 +5726,7 @@ int saa7134_board_init1(struct saa7134_dev *dev) case SAA7134_BOARD_AVERMEDIA_A16AR: case SAA7134_BOARD_ENCORE_ENLTV: case SAA7134_BOARD_ENCORE_ENLTV_FM: + case SAA7134_BOARD_ENCORE_ENLTV_FM53: case SAA7134_BOARD_10MOONSTVMASTER3: case SAA7134_BOARD_BEHOLD_401: case SAA7134_BOARD_BEHOLD_403: diff --git a/drivers/media/video/saa7134/saa7134-input.c b/drivers/media/video/saa7134/saa7134-input.c index ac6beb2..f176730 100644 --- a/drivers/media/video/saa7134/saa7134-input.c +++ b/drivers/media/video/saa7134/saa7134-input.c @@ -509,6 +509,12 @@ int saa7134_input_init1(struct saa7134_dev *dev) mask_keyup = 0x040000; polling = 50; // ms break; + case SAA7134_BOARD_ENCORE_ENLTV_FM53: + ir_codes = ir_codes_encore_enltv_fm53; + mask_keydown = 0x0040000; + mask_keycode = 0x00007f; + nec_gpio = 1; + break; case SAA7134_BOARD_10MOONSTVMASTER3: ir_codes = ir_codes_encore_enltv; mask_keycode = 0x5f80000; diff --git a/drivers/media/video/saa7134/saa7134.h b/drivers/media/video/saa7134/saa7134.h index 4005335..982003d 100644 --- a/drivers/media/video/saa7134/saa7134.h +++ b/drivers/media/video/saa7134/saa7134.h @@ -270,6 +270,7 @@ struct saa7134_format { #define SAA7134_BOARD_AVERMEDIA_M103 145 #define SAA7134_BOARD_ASUSTeK_P7131_ANALOG 146 #define SAA7134_BOARD_ASUSTeK_TIGER_3IN1 147 +#define SAA7134_BOARD_ENCORE_ENLTV_FM53 148 #define SAA7134_MAXBOARDS 8 #define SAA7134_INPUT_MAX 8 diff --git a/include/media/ir-common.h b/include/media/ir-common.h index 6f8ef35..b029987 100644 --- a/include/media/ir-common.h +++ b/include/media/ir-common.h @@ -153,6 +153,7 @@ extern IR_KEYTAB_TYPE ir_codes_pinnacle_pctv_hd[IR_KEYTAB_SIZE]; extern IR_KEYTAB_TYPE ir_codes_genius_tvgo_a11mce[IR_KEYTAB_SIZE]; extern IR_KEYTAB_TYPE ir_codes_powercolor_real_angel[IR_KEYTAB_SIZE]; extern IR_KEYTAB_TYPE ir_codes_avermedia_a16d[IR_KEYTAB_SIZE]; +extern IR_KEYTAB_TYPE ir_codes_encore_enltv_fm53[IR_KEYTAB_SIZE]; #endif -- cgit v0.10.2 From 36f6bb97caa772d7dc42250db74253e0867a444a Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Thu, 26 Jun 2008 17:03:00 -0300 Subject: V4L/DVB (9060): saa7134: Add support for Avermedia PCI pure analog (M135A) Thanks to Sistema Fenix (http://www.sistemafenix.com.br/) for sponsoring this development. Signed-off-by: Gilberto Signed-off-by: Mauro Carvalho Chehab diff --git a/Documentation/video4linux/CARDLIST.saa7134 b/Documentation/video4linux/CARDLIST.saa7134 index 1438364..2023c40 100644 --- a/Documentation/video4linux/CARDLIST.saa7134 +++ b/Documentation/video4linux/CARDLIST.saa7134 @@ -147,3 +147,4 @@ 146 -> ASUSTeK P7131 Analog 147 -> Asus Tiger 3in1 [1043:4878] 148 -> Encore ENLTV-FM v5.3 [1a7f:2008] +149 -> Avermedia PCI pure analog (M135A) [1461:f11d] diff --git a/drivers/media/common/ir-keymaps.c b/drivers/media/common/ir-keymaps.c index 891f3b3..f061dfb 100644 --- a/drivers/media/common/ir-keymaps.c +++ b/drivers/media/common/ir-keymaps.c @@ -103,6 +103,56 @@ IR_KEYTAB_TYPE ir_codes_avermedia_dvbt[IR_KEYTAB_SIZE] = { EXPORT_SYMBOL_GPL(ir_codes_avermedia_dvbt); +/* Mauro Carvalho Chehab */ +IR_KEYTAB_TYPE ir_codes_avermedia_m135a[IR_KEYTAB_SIZE] = { + [0x00] = KEY_POWER2, + [0x2e] = KEY_DOT, /* '.' */ + [0x01] = KEY_MODE, /* TV/FM */ + + [0x05] = KEY_1, + [0x06] = KEY_2, + [0x07] = KEY_3, + [0x09] = KEY_4, + [0x0a] = KEY_5, + [0x0b] = KEY_6, + [0x0d] = KEY_7, + [0x0e] = KEY_8, + [0x0f] = KEY_9, + [0x11] = KEY_0, + + [0x13] = KEY_RIGHT, /* -> */ + [0x12] = KEY_LEFT, /* <- */ + + [0x17] = KEY_SLEEP, /* Capturar Imagem */ + [0x10] = KEY_SHUFFLE, /* Amostra */ + + /* FIXME: The keys bellow aren't ok */ + + [0x43] = KEY_CHANNELUP, + [0x42] = KEY_CHANNELDOWN, + [0x1f] = KEY_VOLUMEUP, + [0x1e] = KEY_VOLUMEDOWN, + [0x0c] = KEY_ENTER, + + [0x14] = KEY_MUTE, + [0x08] = KEY_AUDIO, + + [0x03] = KEY_TEXT, + [0x04] = KEY_EPG, + [0x2b] = KEY_TV2, /* TV2 */ + + [0x1d] = KEY_RED, + [0x1c] = KEY_YELLOW, + [0x41] = KEY_GREEN, + [0x40] = KEY_BLUE, + + [0x1a] = KEY_PLAYPAUSE, + [0x19] = KEY_RECORD, + [0x18] = KEY_PLAY, + [0x1b] = KEY_STOP, +}; +EXPORT_SYMBOL_GPL(ir_codes_avermedia_m135a); + /* Attila Kondoros */ IR_KEYTAB_TYPE ir_codes_apac_viewcomp[IR_KEYTAB_SIZE] = { diff --git a/drivers/media/video/saa7134/saa7134-cards.c b/drivers/media/video/saa7134/saa7134-cards.c index 3ad5b94..a16ddb2 100644 --- a/drivers/media/video/saa7134/saa7134-cards.c +++ b/drivers/media/video/saa7134/saa7134-cards.c @@ -3671,6 +3671,40 @@ struct saa7134_board saa7134_boards[] = { .tv = 1, }}, }, + [SAA7134_BOARD_AVERMEDIA_M135A] = { + .name = "Avermedia PCI pure analog (M135A)", + .audio_clock = 0x00187de7, + .tuner_type = TUNER_PHILIPS_TDA8290, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .tuner_config = 2, + .gpiomask = 0x020200000, + .inputs = {{ + .name = name_tv, + .vmux = 1, + .amux = TV, + .tv = 1, + }, { + .name = name_comp1, + .vmux = 3, + .amux = LINE1, + }, { + .name = name_svideo, + .vmux = 8, + .amux = LINE1, + } }, + .radio = { + .name = name_radio, + .amux = TV, + .gpio = 0x00200000, + }, + .mute = { + .name = name_mute, + .amux = TV, + .gpio = 0x01, + }, + }, [SAA7134_BOARD_BEHOLD_401] = { /* Beholder Intl. Ltd. 2008 */ /*Dmitry Belimov */ @@ -4847,6 +4881,12 @@ struct pci_device_id saa7134_pci_tbl[] = { },{ .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7133, + .subvendor = 0x1461, /* Avermedia Technologies Inc */ + .subdevice = 0xf11d, + .driver_data = SAA7134_BOARD_AVERMEDIA_M135A, + }, { + .vendor = PCI_VENDOR_ID_PHILIPS, .device = PCI_DEVICE_ID_PHILIPS_SAA7130, .subvendor = PCI_VENDOR_ID_PHILIPS, .subdevice = 0x2004, @@ -5702,6 +5742,7 @@ int saa7134_board_init1(struct saa7134_dev *dev) case SAA7134_BOARD_AVERMEDIA_STUDIO_507: case SAA7134_BOARD_AVERMEDIA_GO_007_FM: case SAA7134_BOARD_AVERMEDIA_777: + case SAA7134_BOARD_AVERMEDIA_M135A: /* case SAA7134_BOARD_SABRENT_SBTTVFM: */ /* not finished yet */ case SAA7134_BOARD_VIDEOMATE_TV_PVR: case SAA7134_BOARD_VIDEOMATE_GOLD_PLUS: diff --git a/drivers/media/video/saa7134/saa7134-input.c b/drivers/media/video/saa7134/saa7134-input.c index f176730..0fded75 100644 --- a/drivers/media/video/saa7134/saa7134-input.c +++ b/drivers/media/video/saa7134/saa7134-input.c @@ -401,6 +401,12 @@ int saa7134_input_init1(struct saa7134_dev *dev) saa_setb(SAA7134_GPIO_GPMODE0, 0x4); saa_setb(SAA7134_GPIO_GPSTATUS0, 0x4); break; + case SAA7134_BOARD_AVERMEDIA_M135A: + ir_codes = ir_codes_avermedia_m135a; + mask_keydown = 0x0040000; + mask_keycode = 0x00013f; + nec_gpio = 1; + break; case SAA7134_BOARD_AVERMEDIA_777: case SAA7134_BOARD_AVERMEDIA_A16AR: ir_codes = ir_codes_avermedia; diff --git a/drivers/media/video/saa7134/saa7134.h b/drivers/media/video/saa7134/saa7134.h index 982003d..caf055c 100644 --- a/drivers/media/video/saa7134/saa7134.h +++ b/drivers/media/video/saa7134/saa7134.h @@ -271,6 +271,7 @@ struct saa7134_format { #define SAA7134_BOARD_ASUSTeK_P7131_ANALOG 146 #define SAA7134_BOARD_ASUSTeK_TIGER_3IN1 147 #define SAA7134_BOARD_ENCORE_ENLTV_FM53 148 +#define SAA7134_BOARD_AVERMEDIA_M135A 149 #define SAA7134_MAXBOARDS 8 #define SAA7134_INPUT_MAX 8 diff --git a/include/media/ir-common.h b/include/media/ir-common.h index b029987..54a57d0 100644 --- a/include/media/ir-common.h +++ b/include/media/ir-common.h @@ -110,6 +110,7 @@ void ir_rc5_timer_keyup(unsigned long data); extern IR_KEYTAB_TYPE ir_codes_empty[IR_KEYTAB_SIZE]; extern IR_KEYTAB_TYPE ir_codes_avermedia[IR_KEYTAB_SIZE]; extern IR_KEYTAB_TYPE ir_codes_avermedia_dvbt[IR_KEYTAB_SIZE]; +extern IR_KEYTAB_TYPE ir_codes_avermedia_m135a[IR_KEYTAB_SIZE]; extern IR_KEYTAB_TYPE ir_codes_apac_viewcomp[IR_KEYTAB_SIZE]; extern IR_KEYTAB_TYPE ir_codes_pixelview[IR_KEYTAB_SIZE]; extern IR_KEYTAB_TYPE ir_codes_pixelview_new[IR_KEYTAB_SIZE]; -- cgit v0.10.2 From 9b0001913983de65af17eee8baf02283160f5a69 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Thu, 26 Jun 2008 17:03:00 -0300 Subject: V4L/DVB (9061): saa7134: Add support for Real Audio 220 Thanks to Sistema Fenix (http://www.sistemafenix.com.br/) for sponsoring this development. Signed-off-by: Gilberto Signed-off-by: Mauro Carvalho Chehab diff --git a/Documentation/video4linux/CARDLIST.saa7134 b/Documentation/video4linux/CARDLIST.saa7134 index 2023c40..aa06151 100644 --- a/Documentation/video4linux/CARDLIST.saa7134 +++ b/Documentation/video4linux/CARDLIST.saa7134 @@ -146,5 +146,6 @@ 145 -> AVerMedia MiniPCI DVB-T Hybrid M103 [1461:f636] 146 -> ASUSTeK P7131 Analog 147 -> Asus Tiger 3in1 [1043:4878] +147 -> Zogis Real Angel 220 148 -> Encore ENLTV-FM v5.3 [1a7f:2008] 149 -> Avermedia PCI pure analog (M135A) [1461:f11d] diff --git a/drivers/media/common/ir-keymaps.c b/drivers/media/common/ir-keymaps.c index f061dfb..b7ed88c 100644 --- a/drivers/media/common/ir-keymaps.c +++ b/drivers/media/common/ir-keymaps.c @@ -2381,3 +2381,43 @@ IR_KEYTAB_TYPE ir_codes_encore_enltv_fm53[IR_KEYTAB_SIZE] = { [0x47] = KEY_SLEEP, /* shutdown */ }; EXPORT_SYMBOL_GPL(ir_codes_encore_enltv_fm53); + +/* Zogis Real Audio 220 - 32 keys IR */ +IR_KEYTAB_TYPE ir_codes_real_audio_220_32_keys[IR_KEYTAB_SIZE] = { + [0x1c] = KEY_RADIO, + [0x12] = KEY_POWER2, + + [0x01] = KEY_1, + [0x02] = KEY_2, + [0x03] = KEY_3, + [0x04] = KEY_4, + [0x05] = KEY_5, + [0x06] = KEY_6, + [0x07] = KEY_7, + [0x08] = KEY_8, + [0x09] = KEY_9, + [0x00] = KEY_0, + + [0x0c] = KEY_VOLUMEUP, + [0x18] = KEY_VOLUMEDOWN, + [0x0b] = KEY_CHANNELUP, + [0x15] = KEY_CHANNELDOWN, + [0x16] = KEY_ENTER, + + [0x11] = KEY_LIST, /* Source */ + [0x0d] = KEY_AUDIO, /* stereo */ + + [0x0f] = KEY_PREVIOUS, /* Prev */ + [0x1b] = KEY_PAUSE, /* Timeshift */ + [0x1a] = KEY_NEXT, /* Next */ + + [0x0e] = KEY_STOP, + [0x1f] = KEY_PLAY, + [0x1e] = KEY_PLAYPAUSE, /* Pause */ + + [0x1d] = KEY_RECORD, + [0x13] = KEY_MUTE, + [0x19] = KEY_SHUFFLE, /* Snapshot */ + +}; +EXPORT_SYMBOL_GPL(ir_codes_real_audio_220_32_keys); diff --git a/drivers/media/video/saa7134/saa7134-cards.c b/drivers/media/video/saa7134/saa7134-cards.c index a16ddb2..2a5e0db 100644 --- a/drivers/media/video/saa7134/saa7134-cards.c +++ b/drivers/media/video/saa7134/saa7134-cards.c @@ -4513,6 +4513,41 @@ struct saa7134_board saa7134_boards[] = { .gpio = 0x0200000, }, }, + [SAA7134_BOARD_REAL_ANGEL_220] = { + .name = "Zogis Real Angel 220", + .audio_clock = 0x00187de7, + .tuner_type = TUNER_TNF_5335MF, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .gpiomask = 0x801a8087, + .inputs = { { + .name = name_tv, + .vmux = 3, + .amux = LINE2, + .tv = 1, + .gpio = 0x624000, + }, { + .name = name_comp1, + .vmux = 1, + .amux = LINE1, + .gpio = 0x624000, + }, { + .name = name_svideo, + .vmux = 1, + .amux = LINE1, + .gpio = 0x624000, + } }, + .radio = { + .name = name_radio, + .amux = LINE2, + .gpio = 0x624001, + }, + .mute = { + .name = name_mute, + .amux = TV, + }, + }, }; const unsigned int saa7134_bcount = ARRAY_SIZE(saa7134_boards); @@ -5780,6 +5815,7 @@ int saa7134_board_init1(struct saa7134_dev *dev) case SAA7134_BOARD_BEHOLD_505FM: case SAA7134_BOARD_BEHOLD_507_9FM: case SAA7134_BOARD_GENIUS_TVGO_A11MCE: + case SAA7134_BOARD_REAL_ANGEL_220: dev->has_remote = SAA7134_REMOTE_GPIO; break; case SAA7134_BOARD_FLYDVBS_LR300: diff --git a/drivers/media/video/saa7134/saa7134-input.c b/drivers/media/video/saa7134/saa7134-input.c index 0fded75..72a1c67 100644 --- a/drivers/media/video/saa7134/saa7134-input.c +++ b/drivers/media/video/saa7134/saa7134-input.c @@ -533,6 +533,12 @@ int saa7134_input_init1(struct saa7134_dev *dev) mask_keydown = 0xf00000; polling = 50; /* ms */ break; + case SAA7134_BOARD_REAL_ANGEL_220: + ir_codes = ir_codes_real_audio_220_32_keys; + mask_keycode = 0x3f00; + mask_keyup = 0x4000; + polling = 50; /* ms */ + break; } if (NULL == ir_codes) { printk("%s: Oops: IR config error [card=%d]\n", diff --git a/drivers/media/video/saa7134/saa7134.h b/drivers/media/video/saa7134/saa7134.h index caf055c..c17919a 100644 --- a/drivers/media/video/saa7134/saa7134.h +++ b/drivers/media/video/saa7134/saa7134.h @@ -272,6 +272,7 @@ struct saa7134_format { #define SAA7134_BOARD_ASUSTeK_TIGER_3IN1 147 #define SAA7134_BOARD_ENCORE_ENLTV_FM53 148 #define SAA7134_BOARD_AVERMEDIA_M135A 149 +#define SAA7134_BOARD_REAL_ANGEL_220 147 #define SAA7134_MAXBOARDS 8 #define SAA7134_INPUT_MAX 8 diff --git a/include/media/ir-common.h b/include/media/ir-common.h index 54a57d0..436360e 100644 --- a/include/media/ir-common.h +++ b/include/media/ir-common.h @@ -155,7 +155,7 @@ extern IR_KEYTAB_TYPE ir_codes_genius_tvgo_a11mce[IR_KEYTAB_SIZE]; extern IR_KEYTAB_TYPE ir_codes_powercolor_real_angel[IR_KEYTAB_SIZE]; extern IR_KEYTAB_TYPE ir_codes_avermedia_a16d[IR_KEYTAB_SIZE]; extern IR_KEYTAB_TYPE ir_codes_encore_enltv_fm53[IR_KEYTAB_SIZE]; - +extern IR_KEYTAB_TYPE ir_codes_real_audio_220_32_keys[IR_KEYTAB_SIZE]; #endif /* -- cgit v0.10.2 From a31d2bb773f23f55cc6713f2d1a9b60977bb8f89 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Mon, 29 Sep 2008 12:08:29 -0300 Subject: V4L/DVB (9062): Add support for Prolink Pixelview Global Extreme Thanks to Sidney Matias for getting GPIO values and testing on this device. Cc: Sidney Matias Signed-off-by: Mauro Carvalho Chehab diff --git a/Documentation/video4linux/CARDLIST.cx88 b/Documentation/video4linux/CARDLIST.cx88 index 075650c..50d0b1c 100644 --- a/Documentation/video4linux/CARDLIST.cx88 +++ b/Documentation/video4linux/CARDLIST.cx88 @@ -72,3 +72,4 @@ 71 -> Omicom SS4 DVB-S/S2 PCI [A044:2011] 72 -> TBS 8920 DVB-S/S2 [8920:8888] 73 -> TeVii S420 DVB-S [d420:9022] + 74 -> Prolink Pixelview Global Extreme [1554:4976] diff --git a/drivers/media/video/cx88/cx88-cards.c b/drivers/media/video/cx88/cx88-cards.c index b5a2509..9f72108 100644 --- a/drivers/media/video/cx88/cx88-cards.c +++ b/drivers/media/video/cx88/cx88-cards.c @@ -1628,6 +1628,36 @@ static const struct cx88_board cx88_boards[] = { .gpio2 = 0x0cfb, }, }, + [CX88_BOARD_PROLINK_PV_GLOBAL_XTREME] = { + .name = "Prolink Pixelview Global Extreme", + .tuner_type = TUNER_XC2028, + .tuner_addr = 0x61, + .input = { { + .type = CX88_VMUX_TELEVISION, + .vmux = 0, + .gpio0 = 0x04fb, + .gpio1 = 0x04080, + .gpio2 = 0x0cf7, + }, { + .type = CX88_VMUX_COMPOSITE1, + .vmux = 1, + .gpio0 = 0x04fb, + .gpio1 = 0x04080, + .gpio2 = 0x0cfb, + }, { + .type = CX88_VMUX_SVIDEO, + .vmux = 2, + .gpio0 = 0x04fb, + .gpio1 = 0x04080, + .gpio2 = 0x0cfb, + } }, + .radio = { + .type = CX88_RADIO, + .gpio0 = 0x04ff, + .gpio1 = 0x04080, + .gpio2 = 0x0cf7, + }, + }, /* Both radio, analog and ATSC work with this board. However, for analog to work, s5h1409 gate should be open, otherwise, tuner-xc3028 won't be detected. @@ -2126,6 +2156,10 @@ static const struct cx88_subid cx88_subids[] = { .subdevice = 0x4935, .card = CX88_BOARD_PROLINK_PV_8000GT, }, { + .subvendor = 0x1554, + .subdevice = 0x4976, + .card = CX88_BOARD_PROLINK_PV_GLOBAL_XTREME, + }, { .subvendor = 0x17de, .subdevice = 0x08c1, .card = CX88_BOARD_KWORLD_ATSC_120, @@ -2429,6 +2463,7 @@ static int cx88_xc2028_tuner_callback(struct cx88_core *core, return cx88_xc3028_geniatech_tuner_callback(core, command, arg); case CX88_BOARD_PROLINK_PV_8000GT: + case CX88_BOARD_PROLINK_PV_GLOBAL_XTREME: return cx88_pv_8000gt_callback(core, command, arg); case CX88_BOARD_DVICO_FUSIONHDTV_DVB_T_PRO: case CX88_BOARD_DVICO_FUSIONHDTV_5_PCI_NANO: @@ -2582,6 +2617,7 @@ static void cx88_card_setup_pre_i2c(struct cx88_core *core) udelay(1000); break; + case CX88_BOARD_PROLINK_PV_GLOBAL_XTREME: case CX88_BOARD_PROLINK_PV_8000GT: cx_write(MO_GP2_IO, 0xcf7); mdelay(50); @@ -2629,9 +2665,10 @@ void cx88_setup_xc3028(struct cx88_core *core, struct xc2028_ctrl *ctl) case CX88_BOARD_DVICO_FUSIONHDTV_5_PCI_NANO: ctl->demod = XC3028_FE_OREN538; break; + case CX88_BOARD_PROLINK_PV_GLOBAL_XTREME: case CX88_BOARD_PROLINK_PV_8000GT: /* - * This board uses non-MTS firmware + * Those boards uses non-MTS firmware */ break; default: diff --git a/drivers/media/video/cx88/cx88-input.c b/drivers/media/video/cx88/cx88-input.c index 13bc5d1..8683d10 100644 --- a/drivers/media/video/cx88/cx88-input.c +++ b/drivers/media/video/cx88/cx88-input.c @@ -261,6 +261,7 @@ int cx88_ir_init(struct cx88_core *core, struct pci_dev *pci) ir->polling = 1; /* ms */ break; case CX88_BOARD_PROLINK_PV_8000GT: + case CX88_BOARD_PROLINK_PV_GLOBAL_XTREME: ir_codes = ir_codes_pixelview_new; ir->gpio_addr = MO_GP1_IO; ir->mask_keycode = 0x3f; diff --git a/drivers/media/video/cx88/cx88.h b/drivers/media/video/cx88/cx88.h index 30b750e..6420fb7 100644 --- a/drivers/media/video/cx88/cx88.h +++ b/drivers/media/video/cx88/cx88.h @@ -227,6 +227,7 @@ extern struct sram_channel cx88_sram_channels[]; #define CX88_BOARD_OMICOM_SS4_PCI 71 #define CX88_BOARD_TBS_8920 72 #define CX88_BOARD_TEVII_S420 73 +#define CX88_BOARD_PROLINK_PV_GLOBAL_XTREME 74 enum cx88_itype { CX88_VMUX_COMPOSITE1 = 1, -- cgit v0.10.2 From f689d9083a3a46ae3801c37d0dbcb170fc6a9608 Mon Sep 17 00:00:00 2001 From: Adam Glover Date: Tue, 6 May 2008 03:20:27 -0300 Subject: V4L/DVB (9063): Add ADS Tech Instant HDTV PCI support Add PCI ID and device specific tables for ADS Tech Instant HDTV. [mchehab@redhat.com: make checkpatch happy and fix merge conflicts] Signed-off-by: Mauro Carvalho Chehab diff --git a/Documentation/video4linux/CARDLIST.saa7134 b/Documentation/video4linux/CARDLIST.saa7134 index aa06151..727b5f2 100644 --- a/Documentation/video4linux/CARDLIST.saa7134 +++ b/Documentation/video4linux/CARDLIST.saa7134 @@ -146,6 +146,7 @@ 145 -> AVerMedia MiniPCI DVB-T Hybrid M103 [1461:f636] 146 -> ASUSTeK P7131 Analog 147 -> Asus Tiger 3in1 [1043:4878] -147 -> Zogis Real Angel 220 148 -> Encore ENLTV-FM v5.3 [1a7f:2008] 149 -> Avermedia PCI pure analog (M135A) [1461:f11d] +150 -> Zogis Real Angel 220 +151 -> ADS Tech Instant HDTV [1421:0380] diff --git a/drivers/media/video/saa7134/saa7134-cards.c b/drivers/media/video/saa7134/saa7134-cards.c index 2a5e0db..a2653b8 100644 --- a/drivers/media/video/saa7134/saa7134-cards.c +++ b/drivers/media/video/saa7134/saa7134-cards.c @@ -4548,6 +4548,30 @@ struct saa7134_board saa7134_boards[] = { .amux = TV, }, }, + [SAA7134_BOARD_ADS_INSTANT_HDTV_PCI] = { + .name = "ADS Tech Instant HDTV", + .audio_clock = 0x00187de7, + .tuner_type = TUNER_PHILIPS_TUV1236D, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .tda9887_conf = TDA9887_PRESENT, + .mpeg = SAA7134_MPEG_DVB, + .inputs = { { + .name = name_tv, + .vmux = 1, + .amux = TV, + .tv = 1, + }, { + .name = name_comp, + .vmux = 4, + .amux = LINE1, + }, { + .name = name_svideo, + .vmux = 8, + .amux = LINE1, + } }, + }, }; const unsigned int saa7134_bcount = ARRAY_SIZE(saa7134_boards); @@ -5566,6 +5590,12 @@ struct pci_device_id saa7134_pci_tbl[] = { .driver_data = SAA7134_BOARD_VIDEOMATE_T750, }, { .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7133, /* SAA7135HL */ + .subvendor = 0x1421, + .subdevice = 0x0380, + .driver_data = SAA7134_BOARD_ADS_INSTANT_HDTV_PCI, + }, { + .vendor = PCI_VENDOR_ID_PHILIPS, .device = PCI_DEVICE_ID_PHILIPS_SAA7133, .subvendor = 0x5169, .subdevice = 0x1502, @@ -6195,6 +6225,7 @@ int saa7134_board_init2(struct saa7134_dev *dev) i2c_transfer(&dev->i2c_adap, &msg, 1); break; } + case SAA7134_BOARD_ADS_INSTANT_HDTV_PCI: case SAA7134_BOARD_KWORLD_ATSC110: { /* enable tuner */ diff --git a/drivers/media/video/saa7134/saa7134-dvb.c b/drivers/media/video/saa7134/saa7134-dvb.c index 0dd6b98..2c51857 100644 --- a/drivers/media/video/saa7134/saa7134-dvb.c +++ b/drivers/media/video/saa7134/saa7134-dvb.c @@ -1156,6 +1156,7 @@ static int dvb_init(struct saa7134_dev *dev) dvb_attach(dvb_pll_attach, dev->dvb.frontend, 0x61, NULL, DVB_PLL_TDHU2); break; + case SAA7134_BOARD_ADS_INSTANT_HDTV_PCI: case SAA7134_BOARD_KWORLD_ATSC110: dev->dvb.frontend = dvb_attach(nxt200x_attach, &kworldatsc110, &dev->i2c_adap); diff --git a/drivers/media/video/saa7134/saa7134.h b/drivers/media/video/saa7134/saa7134.h index c17919a..0907c70 100644 --- a/drivers/media/video/saa7134/saa7134.h +++ b/drivers/media/video/saa7134/saa7134.h @@ -272,7 +272,8 @@ struct saa7134_format { #define SAA7134_BOARD_ASUSTeK_TIGER_3IN1 147 #define SAA7134_BOARD_ENCORE_ENLTV_FM53 148 #define SAA7134_BOARD_AVERMEDIA_M135A 149 -#define SAA7134_BOARD_REAL_ANGEL_220 147 +#define SAA7134_BOARD_REAL_ANGEL_220 150 +#define SAA7134_BOARD_ADS_INSTANT_HDTV_PCI 151 #define SAA7134_MAXBOARDS 8 #define SAA7134_INPUT_MAX 8 -- cgit v0.10.2 From 3de2ed127013219efc439c0d052d1cc825da88c2 Mon Sep 17 00:00:00 2001 From: Dmitri Belimov Date: Mon, 29 Sep 2008 02:25:40 -0300 Subject: V4L/DVB (9065): saa7134: fix I2C remote controls on saa7134 This is patch for solve this regression. Load ir-kbd-i2c module when remote is i2c type. Signed-off-by: Beholder Intl. Ltd. Dmitry Belimov Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/saa7134/saa7134-core.c b/drivers/media/video/saa7134/saa7134-core.c index 12872c0..b686bfa 100644 --- a/drivers/media/video/saa7134/saa7134-core.c +++ b/drivers/media/video/saa7134/saa7134-core.c @@ -699,6 +699,10 @@ static int saa7134_hw_enable2(struct saa7134_dev *dev) irq2_mask |= SAA7134_IRQ2_INTE_GPIO18A; } + if (dev->has_remote == SAA7134_REMOTE_I2C) { + request_module("ir-kbd-i2c"); + } + saa_writel(SAA7134_IRQ1, 0); saa_writel(SAA7134_IRQ2, irq2_mask); -- cgit v0.10.2 From 3f6014fc77c3630d2511302e19f4f02af1605947 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?St=C3=A9phane=20Voltz?= Date: Fri, 5 Sep 2008 14:33:54 -0300 Subject: V4L/DVB (9066): Pinnacle Hybrid PCTV Pro (pctv310c) DVB-T support MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This patch against latest mercurial makes DVB-T working on Pinnacle Hybrid PCTV Pro (pctv310c). In cx88-dvb.c, a specific zl10353_config is created with the if2 inferred from the old comment in the currently used config. It is then used for attach, and i2c_gate_ctrl is set to NULL. The entry in cx88-cards.c is modified with GPIO gathered from windows with regspy, and DVB enabled. The frontend is set to XC3028_FE_ZARLINK456 to match the zl10353_config. It is working great with the freeview channels I can receive. Signed-off-by: Stéphane Voltz Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/cx88/cx88-cards.c b/drivers/media/video/cx88/cx88-cards.c index 9f72108..369ba69 100644 --- a/drivers/media/video/cx88/cx88-cards.c +++ b/drivers/media/video/cx88/cx88-cards.c @@ -1449,15 +1449,26 @@ static const struct cx88_board cx88_boards[] = { .name = "Pinnacle Hybrid PCTV", .tuner_type = TUNER_XC2028, .tuner_addr = 0x61, + .radio_type = TUNER_XC2028, + .radio_addr = 0x61, .input = { { .type = CX88_VMUX_TELEVISION, .vmux = 0, + .gpio0 = 0x004ff, + .gpio1 = 0x010ff, + .gpio2 = 0x00001, }, { .type = CX88_VMUX_COMPOSITE1, .vmux = 1, + .gpio0 = 0x004fb, + .gpio1 = 0x010ef, + .audioroute = 1, }, { .type = CX88_VMUX_SVIDEO, .vmux = 2, + .gpio0 = 0x004fb, + .gpio1 = 0x010ef, + .audioroute = 1, } }, .radio = { .type = CX88_RADIO, @@ -1465,6 +1476,7 @@ static const struct cx88_board cx88_boards[] = { .gpio1 = 0x010ff, .gpio2 = 0x0ff, }, + .mpeg = CX88_MPEG_DVB, }, [CX88_BOARD_WINFAST_TV2000_XP_GLOBAL] = { .name = "Winfast TV2000 XP Global", @@ -2671,6 +2683,10 @@ void cx88_setup_xc3028(struct cx88_core *core, struct xc2028_ctrl *ctl) * Those boards uses non-MTS firmware */ break; + case CX88_BOARD_PINNACLE_HYBRID_PCTV: + ctl->demod = XC3028_FE_ZARLINK456; + ctl->mts = 1; + break; default: ctl->demod = XC3028_FE_OREN538; ctl->mts = 1; diff --git a/drivers/media/video/cx88/cx88-dvb.c b/drivers/media/video/cx88/cx88-dvb.c index 6751f36..cccf382 100644 --- a/drivers/media/video/cx88/cx88-dvb.c +++ b/drivers/media/video/cx88/cx88-dvb.c @@ -454,6 +454,12 @@ static struct xc5000_config pinnacle_pctv_hd_800i_tuner_config = { .if_khz = 5380, }; +static struct zl10353_config cx88_pinnacle_hybrid_pctv = { + .demod_address = (0x1e >> 1), + .no_tuner = 1, + .if2 = 45600, +}; + static struct zl10353_config cx88_geniatech_x8000_mt = { .demod_address = (0x1e >> 1), .no_tuner = 1, @@ -890,10 +896,13 @@ static int dvb_register(struct cx8802_dev *dev) break; case CX88_BOARD_PINNACLE_HYBRID_PCTV: dev->dvb.frontend = dvb_attach(zl10353_attach, - &cx88_geniatech_x8000_mt, + &cx88_pinnacle_hybrid_pctv, &core->i2c_adap); - if (attach_xc3028(0x61, dev) < 0) - goto frontend_detach; + if (dev->dvb.frontend) { + dev->dvb.frontend->ops.i2c_gate_ctrl = NULL; + if (attach_xc3028(0x61, dev) < 0) + goto frontend_detach; + } break; case CX88_BOARD_GENIATECH_X8000_MT: dev->ts_gen_cntrl = 0x00; -- cgit v0.10.2 From 1dc7b76a89ea639a575c33710879c425d416dbdb Mon Sep 17 00:00:00 2001 From: "Igor M. Liplianin" Date: Wed, 24 Sep 2008 22:48:53 -0300 Subject: V4L/DVB (9067): Kconfig correction for USB card modification with SI2109/2110 demodulator. Kconfig correction for USB card modification with SI2109/2110 demodulator. Signed-off-by: Igor M. Liplianin Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/dvb/dvb-usb/Kconfig b/drivers/media/dvb/dvb-usb/Kconfig index 5880f2d4..241c9ab 100644 --- a/drivers/media/dvb/dvb-usb/Kconfig +++ b/drivers/media/dvb/dvb-usb/Kconfig @@ -254,6 +254,7 @@ config DVB_USB_DW2102 select DVB_PLL if !DVB_FE_CUSTOMISE select DVB_STV0299 if !DVB_FE_CUSTOMISE select DVB_CX24116 if !DVB_FE_CUSTOMISE + select DVB_SI21XX if !DVB_FE_CUSTOMISE help Say Y here to support the DvbWorld DVB-S/S2 USB2.0 receivers and the TeVii S650. -- cgit v0.10.2 From f907c0207924dd598db37092d331738e3fcb9fbd Mon Sep 17 00:00:00 2001 From: "Igor M. Liplianin" Date: Wed, 24 Sep 2008 23:18:27 -0300 Subject: V4L/DVB (9068): Kconfig dependency fix for DW2002 card with ST STV0288 demodulator. Kconfig dependency fix for DW2002 card with ST STV0288 demodulator. Signed-off-by: Igor M. Liplianin Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/dvb/dm1105/Kconfig b/drivers/media/dvb/dm1105/Kconfig index 2af5fff..1332301 100644 --- a/drivers/media/dvb/dm1105/Kconfig +++ b/drivers/media/dvb/dm1105/Kconfig @@ -3,6 +3,8 @@ config DVB_DM1105 depends on DVB_CORE && PCI && I2C select DVB_PLL if !DVB_FE_CUSTOMISE select DVB_STV0299 if !DVB_FE_CUSTOMISE + select DVB_STV0288 if !DVB_FE_CUSTOMISE + select DVB_STB6000 if !DVB_FE_CUSTOMISE select DVB_CX24116 if !DVB_FE_CUSTOMISE select DVB_SI21XX if !DVB_FE_CUSTOMISE help -- cgit v0.10.2 From 3e01084519a678b410df247581a51eeb1bbf11d5 Mon Sep 17 00:00:00 2001 From: Darron Broad Date: Thu, 25 Sep 2008 16:51:11 -0300 Subject: V4L/DVB (9069): cx88: Bugfix: all client disconnects put the frontend to sleep. From the author: "This fixes the problem where previously all client disconnects put the analogue frontend into standby. In the following example, the first command is succesfully watching TV but the second command which returns EBUSY detunes the receiver by entering it into the standby state. tvtime -d /dev/video0 & cat /dev/video0 " Signed-off-by: Steven Toth Signed-off-by: Darron Broad Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/cx88/cx88-video.c b/drivers/media/video/cx88/cx88-video.c index 61e03d4..be45955 100644 --- a/drivers/media/video/cx88/cx88-video.c +++ b/drivers/media/video/cx88/cx88-video.c @@ -839,6 +839,8 @@ static int video_open(struct inode *inode, struct file *file) } unlock_kernel(); + atomic_inc(&core->users); + return 0; } @@ -926,7 +928,8 @@ static int video_release(struct inode *inode, struct file *file) file->private_data = NULL; kfree(fh); - cx88_call_i2c_clients (dev->core, TUNER_SET_STANDBY, NULL); + if(atomic_dec_and_test(&dev->core->users)) + cx88_call_i2c_clients (dev->core, TUNER_SET_STANDBY, NULL); return 0; } diff --git a/drivers/media/video/cx88/cx88.h b/drivers/media/video/cx88/cx88.h index 6420fb7..dce7d36 100644 --- a/drivers/media/video/cx88/cx88.h +++ b/drivers/media/video/cx88/cx88.h @@ -349,6 +349,7 @@ struct cx88_core { struct mutex lock; /* various v4l controls */ u32 freq; + atomic_t users; /* cx88-video needs to access cx8802 for hybrid tuner pll access. */ struct cx8802_dev *dvbdev; -- cgit v0.10.2 From 459702bf98ae2bd20bad1e271c615aca4972c609 Mon Sep 17 00:00:00 2001 From: Steven Toth Date: Fri, 26 Sep 2008 00:04:52 -0300 Subject: V4L/DVB (9070): S2API: Removed the typedef for the commands, used defines instead. Signed-off-by: Steven Toth Signed-off-by: Mauro Carvalho Chehab diff --git a/include/linux/dvb/frontend.h b/include/linux/dvb/frontend.h index c822bc1..7c17c71 100644 --- a/include/linux/dvb/frontend.h +++ b/include/linux/dvb/frontend.h @@ -246,41 +246,28 @@ struct dvb_frontend_event { struct dvb_frontend_parameters parameters; }; -/* TODO: Turn this into a series of defines, so future maintainers - * don't insert random new commands and break backwards - * binary compatability. - */ -typedef enum dtv_cmd_types { - DTV_UNDEFINED, - DTV_TUNE, - DTV_CLEAR, - - DTV_FREQUENCY, - DTV_MODULATION, - - /* XXX PB: I would like to have field which describes the - * bandwidth of a channel in Hz or kHz - maybe we can remove the - * DTV_BANDWIDTH now and put a compat layer */ - DTV_BANDWIDTH_HZ, - - DTV_INVERSION, - DTV_DISEQC_MASTER, - DTV_SYMBOL_RATE, - DTV_INNER_FEC, - DTV_VOLTAGE, - DTV_TONE, - DTV_PILOT, - DTV_ROLLOFF, - - DTV_DISEQC_SLAVE_REPLY, - - /* Basic enumeration set for querying unlimited capabilities */ - DTV_FE_CAPABILITY_COUNT, - DTV_FE_CAPABILITY, - - /* New commands are always appended */ - DTV_DELIVERY_SYSTEM, -} dtv_cmd_types_t; +/* S2API Commands */ +#define DTV_UNDEFINED 0 +#define DTV_TUNE 1 +#define DTV_CLEAR 2 +#define DTV_FREQUENCY 3 +#define DTV_MODULATION 4 +#define DTV_BANDWIDTH_HZ 5 +#define DTV_INVERSION 6 +#define DTV_DISEQC_MASTER 7 +#define DTV_SYMBOL_RATE 8 +#define DTV_INNER_FEC 9 +#define DTV_VOLTAGE 10 +#define DTV_TONE 11 +#define DTV_PILOT 12 +#define DTV_ROLLOFF 13 +#define DTV_DISEQC_SLAVE_REPLY 14 + +/* Basic enumeration set for querying unlimited capabilities */ +#define DTV_FE_CAPABILITY_COUNT 15 +#define DTV_FE_CAPABILITY 16 +#define DTV_DELIVERY_SYSTEM 17 + typedef enum fe_pilot { PILOT_ON, -- cgit v0.10.2 From d48cb402a1ba48c4ad4a36c3c561386027318459 Mon Sep 17 00:00:00 2001 From: Steven Toth Date: Fri, 26 Sep 2008 00:16:25 -0300 Subject: V4L/DVB (9071): S2API: Implement result codes for individual commands This allows application developers to determine which particular command in a sequence is invalid, or failing with error. Signed-off-by: Steven Toth Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/dvb/dvb-core/dvb_frontend.c b/drivers/media/dvb/dvb-core/dvb_frontend.c index 7da2537..0ef9c2a 100644 --- a/drivers/media/dvb/dvb-core/dvb_frontend.c +++ b/drivers/media/dvb/dvb-core/dvb_frontend.c @@ -1262,8 +1262,10 @@ static int dvb_frontend_ioctl_properties(struct inode *inode, struct file *file, goto out; } - for (i = 0; i < tvps->num; i++) - err |= dtv_property_process_set(fe, tvp + i, inode, file); + for (i = 0; i < tvps->num; i++) { + (tvp + i)->result = dtv_property_process_set(fe, tvp + i, inode, file); + err |= (tvp + i)->result; + } if(fe->dtv_property_cache.state == DTV_TUNE) { printk("%s() Property cache is full, tuning\n", __FUNCTION__); @@ -1295,8 +1297,10 @@ static int dvb_frontend_ioctl_properties(struct inode *inode, struct file *file, goto out; } - for (i = 0; i < tvps->num; i++) - err |= dtv_property_process_get(fe, tvp + i, inode, file); + for (i = 0; i < tvps->num; i++) { + (tvp + i)->result = dtv_property_process_get(fe, tvp + i, inode, file); + err |= (tvp + i)->result; + } if (copy_to_user(tvps->props, tvp, tvps->num * sizeof(struct dtv_property))) { err = -EFAULT; diff --git a/include/linux/dvb/frontend.h b/include/linux/dvb/frontend.h index 7c17c71..b561626 100644 --- a/include/linux/dvb/frontend.h +++ b/include/linux/dvb/frontend.h @@ -323,6 +323,7 @@ struct dtv_property { void *reserved2; } buffer; } u; + int result; } __attribute__ ((packed)); /* No more than 16 properties during any given ioctl */ -- cgit v0.10.2 From eacf8d8d6bc6798f6870a2cf2c159bfcde3759ac Mon Sep 17 00:00:00 2001 From: Steven Toth Date: Fri, 26 Sep 2008 00:29:49 -0300 Subject: V4L/DVB (9072): S2API: Add DTV_API_VERSION command This allows application developers to query the dvb-core API version dynamically, helping developers understand whether certain features will be available. Signed-off-by: Steven Toth Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/dvb/dvb-core/dvb_frontend.c b/drivers/media/dvb/dvb-core/dvb_frontend.c index 0ef9c2a..4c3f0d7 100644 --- a/drivers/media/dvb/dvb-core/dvb_frontend.c +++ b/drivers/media/dvb/dvb-core/dvb_frontend.c @@ -40,6 +40,7 @@ #include "dvb_frontend.h" #include "dvbdev.h" +#include static int dvb_frontend_debug; static int dvb_shutdown_timeout; @@ -836,6 +837,11 @@ struct dtv_cmds_h dtv_cmds[] = { .set = 0, .buffer = 1, }, + [DTV_API_VERSION] = { + .name = "DTV_API_VERSION", + .cmd = DTV_API_VERSION, + .set = 0, + }, }; void dtv_property_dump(struct dtv_property *tvp) @@ -1104,6 +1110,9 @@ int dtv_property_process_get(struct dvb_frontend *fe, struct dtv_property *tvp, case DTV_TONE: tvp->u.data = fe->dtv_property_cache.sectone; break; + case DTV_API_VERSION: + tvp->u.data = (DVB_API_VERSION << 8) | DVB_API_VERSION_MINOR; + break; default: r = -1; } diff --git a/include/linux/dvb/frontend.h b/include/linux/dvb/frontend.h index b561626..eb98f8c 100644 --- a/include/linux/dvb/frontend.h +++ b/include/linux/dvb/frontend.h @@ -268,6 +268,7 @@ struct dvb_frontend_event { #define DTV_FE_CAPABILITY 16 #define DTV_DELIVERY_SYSTEM 17 +#define DTV_API_VERSION 35 typedef enum fe_pilot { PILOT_ON, diff --git a/include/linux/dvb/version.h b/include/linux/dvb/version.h index 126e0c2..25b823b 100644 --- a/include/linux/dvb/version.h +++ b/include/linux/dvb/version.h @@ -23,7 +23,7 @@ #ifndef _DVBVERSION_H_ #define _DVBVERSION_H_ -#define DVB_API_VERSION 3 -#define DVB_API_VERSION_MINOR 2 +#define DVB_API_VERSION 5 +#define DVB_API_VERSION_MINOR 0 #endif /*_DVBVERSION_H_*/ -- cgit v0.10.2 From 3c41cb77f4be3076fdbcf9a417052c3c6ce78094 Mon Sep 17 00:00:00 2001 From: Jean-Francois Moine Date: Wed, 10 Sep 2008 02:57:09 -0300 Subject: V4L/DVB (9074): gspca: sonixj webcam 0c45:60fe added. Signed-off-by: Jean-Francois Moine Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/gspca/sonixj.c b/drivers/media/video/gspca/sonixj.c index 1d6f2ee..2ca4d9f 100644 --- a/drivers/media/video/gspca/sonixj.c +++ b/drivers/media/video/gspca/sonixj.c @@ -1637,7 +1637,9 @@ static const __devinitdata struct usb_device_id device_table[] = { /* {USB_DEVICE(0x0c45, 0x60fa), BSI(SN9C105, OV7648, 0x??)}, */ {USB_DEVICE(0x0c45, 0x60fb), BSI(SN9C105, OV7660, 0x21)}, {USB_DEVICE(0x0c45, 0x60fc), BSI(SN9C105, HV7131R, 0x11)}, -/* {USB_DEVICE(0x0c45, 0x60fe), BSI(SN9C105, OV7630, 0x??)}, */ +#if !defined CONFIG_USB_SN9C102 && !defined CONFIG_USB_SN9C102_MODULE + {USB_DEVICE(0x0c45, 0x60fe), BSI(SN9C105, OV7630, 0x21)}, +#endif /* {USB_DEVICE(0x0c45, 0x6108), BSI(SN9C120, OM6801, 0x??)}, */ /* {USB_DEVICE(0x0c45, 0x6122), BSI(SN9C110, ICM105C, 0x??)}, */ /* {USB_DEVICE(0x0c45, 0x6123), BSI(SN9C110, SanyoCCD, 0x??)}, */ -- cgit v0.10.2 From 117a45a85e8c250a45674f81aadd68d77281e57b Mon Sep 17 00:00:00 2001 From: Shane Date: Mon, 15 Sep 2008 04:18:51 -0300 Subject: V4L/DVB (9076): gspca: USB direction lacking in spca561. Signed-off-by: Shane Signed-off-by: Jean-Francois Moine Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/gspca/spca561.c b/drivers/media/video/gspca/spca561.c index e9b0d81..4d8e2c0 100644 --- a/drivers/media/video/gspca/spca561.c +++ b/drivers/media/video/gspca/spca561.c @@ -152,7 +152,7 @@ static void reg_w_val(struct usb_device *dev, __u16 index, __u8 value) ret = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), 0, /* request */ - USB_TYPE_VENDOR | USB_RECIP_DEVICE, + USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE, value, index, NULL, 0, 500); PDEBUG(D_USBO, "reg write: 0x%02x:0x%02x", index, value); if (ret < 0) -- cgit v0.10.2 From 9de436cfc4e966652f8804f0dda8d338ca7fe89c Mon Sep 17 00:00:00 2001 From: Frank Zago Date: Mon, 15 Sep 2008 05:20:38 -0300 Subject: V4L/DVB (9077): gspca: Set the right V4L2_DEBUG values in the main driver. Signed-off-by: Frank Zago Signed-off-by: Jean-Francois Moine Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/gspca/gspca.c b/drivers/media/video/gspca/gspca.c index 58761d9..e4c9989 100644 --- a/drivers/media/video/gspca/gspca.c +++ b/drivers/media/video/gspca/gspca.c @@ -843,9 +843,11 @@ static int dev_open(struct inode *inode, struct file *file) #ifdef GSPCA_DEBUG /* activate the v4l2 debug */ if (gspca_debug & D_V4L2) - gspca_dev->vdev.debug |= 3; + gspca_dev->vdev.debug |= V4L2_DEBUG_IOCTL + | V4L2_DEBUG_IOCTL_ARG; else - gspca_dev->vdev.debug &= ~3; + gspca_dev->vdev.debug &= ~(V4L2_DEBUG_IOCTL + | V4L2_DEBUG_IOCTL_ARG); #endif ret = 0; out: -- cgit v0.10.2 From 1b60e1adc713e8d375dc117f5c3b5032d5b79abe Mon Sep 17 00:00:00 2001 From: Jean-Francois Moine Date: Sat, 20 Sep 2008 05:44:21 -0300 Subject: V4L/DVB (9078): gspca: New exported function to retrieve the current frame buffer. Signed-off-by: Jean-Francois Moine Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/gspca/gspca.c b/drivers/media/video/gspca/gspca.c index e4c9989..4694dc1 100644 --- a/drivers/media/video/gspca/gspca.c +++ b/drivers/media/video/gspca/gspca.c @@ -102,6 +102,22 @@ static struct vm_operations_struct gspca_vm_ops = { .close = gspca_vm_close, }; +/* get the current input frame buffer */ +struct gspca_frame *gspca_get_i_frame(struct gspca_dev *gspca_dev) +{ + struct gspca_frame *frame; + int i; + + i = gspca_dev->fr_i; + i = gspca_dev->fr_queue[i]; + frame = &gspca_dev->frame[i]; + if ((frame->v4l2_buf.flags & BUF_ALL_FLAGS) + != V4L2_BUF_FLAG_QUEUED) + return NULL; + return frame; +} +EXPORT_SYMBOL(gspca_get_i_frame); + /* * fill a video frame from an URB and resubmit */ @@ -110,7 +126,7 @@ static void fill_frame(struct gspca_dev *gspca_dev, { struct gspca_frame *frame; __u8 *data; /* address of data in the iso message */ - int i, j, len, st; + int i, len, st; cam_pkt_op pkt_scan; if (urb->status != 0) { @@ -124,11 +140,8 @@ static void fill_frame(struct gspca_dev *gspca_dev, for (i = 0; i < urb->number_of_packets; i++) { /* check the availability of the frame buffer */ - j = gspca_dev->fr_i; - j = gspca_dev->fr_queue[j]; - frame = &gspca_dev->frame[j]; - if ((frame->v4l2_buf.flags & BUF_ALL_FLAGS) - != V4L2_BUF_FLAG_QUEUED) { + frame = gspca_get_i_frame(gspca_dev); + if (!frame) { gspca_dev->last_packet_type = DISCARD_PACKET; break; } @@ -185,7 +198,6 @@ static void bulk_irq(struct urb *urb { struct gspca_dev *gspca_dev = (struct gspca_dev *) urb->context; struct gspca_frame *frame; - int j; PDEBUG(D_PACK, "bulk irq"); if (!gspca_dev->streaming) @@ -199,11 +211,8 @@ static void bulk_irq(struct urb *urb } /* check the availability of the frame buffer */ - j = gspca_dev->fr_i; - j = gspca_dev->fr_queue[j]; - frame = &gspca_dev->frame[j]; - if ((frame->v4l2_buf.flags & BUF_ALL_FLAGS) - != V4L2_BUF_FLAG_QUEUED) { + frame = gspca_get_i_frame(gspca_dev); + if (!frame) { gspca_dev->last_packet_type = DISCARD_PACKET; } else { PDEBUG(D_PACK, "packet l:%d", urb->actual_length); diff --git a/drivers/media/video/gspca/gspca.h b/drivers/media/video/gspca/gspca.h index 78a35a8..72a2885 100644 --- a/drivers/media/video/gspca/gspca.h +++ b/drivers/media/video/gspca/gspca.h @@ -178,6 +178,7 @@ struct gspca_frame *gspca_frame_add(struct gspca_dev *gspca_dev, struct gspca_frame *frame, const __u8 *data, int len); +struct gspca_frame *gspca_get_i_frame(struct gspca_dev *gspca_dev); #ifdef CONFIG_PM int gspca_suspend(struct usb_interface *intf, pm_message_t message); int gspca_resume(struct usb_interface *intf); -- cgit v0.10.2 From 72ab97cecb7225a4c9f74cdd80268b50b74697bb Mon Sep 17 00:00:00 2001 From: Jean-Francois Moine Date: Sat, 20 Sep 2008 06:39:08 -0300 Subject: V4L/DVB (9079): gspca: Return error code from stream start functions. Signed-off-by: Jean-Francois Moine Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/gspca/conex.c b/drivers/media/video/gspca/conex.c index 4d9f4cc..a9d51ba 100644 --- a/drivers/media/video/gspca/conex.c +++ b/drivers/media/video/gspca/conex.c @@ -837,12 +837,13 @@ static int sd_init(struct gspca_dev *gspca_dev) return 0; } -static void sd_start(struct gspca_dev *gspca_dev) +static int sd_start(struct gspca_dev *gspca_dev) { cx11646_initsize(gspca_dev); cx11646_fw(gspca_dev); cx_sensor(gspca_dev); cx11646_jpeg(gspca_dev); + return 0; } static void sd_stop0(struct gspca_dev *gspca_dev) diff --git a/drivers/media/video/gspca/etoms.c b/drivers/media/video/gspca/etoms.c index 4ff0e38..3be30b4 100644 --- a/drivers/media/video/gspca/etoms.c +++ b/drivers/media/video/gspca/etoms.c @@ -691,7 +691,7 @@ static int sd_init(struct gspca_dev *gspca_dev) } /* -- start the camera -- */ -static void sd_start(struct gspca_dev *gspca_dev) +static int sd_start(struct gspca_dev *gspca_dev) { struct sd *sd = (struct sd *) gspca_dev; @@ -704,6 +704,7 @@ static void sd_start(struct gspca_dev *gspca_dev) reg_w_val(gspca_dev, ET_RESET_ALL, 0x08); et_video(gspca_dev, 1); /* video on */ + return 0; } static void sd_stopN(struct gspca_dev *gspca_dev) diff --git a/drivers/media/video/gspca/gspca.c b/drivers/media/video/gspca/gspca.c index 4694dc1..a286b91 100644 --- a/drivers/media/video/gspca/gspca.c +++ b/drivers/media/video/gspca/gspca.c @@ -584,7 +584,11 @@ static int gspca_init_transfer(struct gspca_dev *gspca_dev) goto out; /* start the cam */ - gspca_dev->sd_desc->start(gspca_dev); + ret = gspca_dev->sd_desc->start(gspca_dev); + if (ret < 0) { + destroy_urbs(gspca_dev); + goto out; + } gspca_dev->streaming = 1; atomic_set(&gspca_dev->nevent, 0); diff --git a/drivers/media/video/gspca/gspca.h b/drivers/media/video/gspca/gspca.h index 72a2885..b0bdae1 100644 --- a/drivers/media/video/gspca/gspca.h +++ b/drivers/media/video/gspca/gspca.h @@ -93,7 +93,7 @@ struct sd_desc { /* mandatory operations */ cam_cf_op config; /* called on probe */ cam_op init; /* called on probe and resume */ - cam_v_op start; /* called on stream on */ + cam_op start; /* called on stream on */ cam_pkt_op pkt_scan; /* optional operations */ cam_v_op stopN; /* called on stream off - main alt */ diff --git a/drivers/media/video/gspca/mars.c b/drivers/media/video/gspca/mars.c index 4d5db47..277ca34 100644 --- a/drivers/media/video/gspca/mars.c +++ b/drivers/media/video/gspca/mars.c @@ -134,7 +134,7 @@ static int sd_init(struct gspca_dev *gspca_dev) return 0; } -static void sd_start(struct gspca_dev *gspca_dev) +static int sd_start(struct gspca_dev *gspca_dev) { int err_code; __u8 *data; @@ -143,9 +143,10 @@ static void sd_start(struct gspca_dev *gspca_dev) int intpipe; PDEBUG(D_STREAM, "camera start, iface %d, alt 8", gspca_dev->iface); - if (usb_set_interface(gspca_dev->dev, gspca_dev->iface, 8) < 0) { + err_code = usb_set_interface(gspca_dev->dev, gspca_dev->iface, 8); + if (err_code < 0) { PDEBUG(D_ERR|D_STREAM, "Set packet size: set interface error"); - return; + return err_code; } data = gspca_dev->usb_buf; @@ -154,7 +155,7 @@ static void sd_start(struct gspca_dev *gspca_dev) err_code = reg_w(gspca_dev, data[0], 2); if (err_code < 0) - return; + return err_code; /* Initialize the MR97113 chip register @@ -180,14 +181,14 @@ static void sd_start(struct gspca_dev *gspca_dev) err_code = reg_w(gspca_dev, data[0], 11); if (err_code < 0) - return; + return err_code; data[0] = 0x23; /* address */ data[1] = 0x09; /* reg 35, append frame header */ err_code = reg_w(gspca_dev, data[0], 2); if (err_code < 0) - return; + return err_code; data[0] = 0x3c; /* address */ /* if (gspca_dev->width == 1280) */ @@ -198,7 +199,7 @@ static void sd_start(struct gspca_dev *gspca_dev) * (unit: 4KB) 200KB */ err_code = reg_w(gspca_dev, data[0], 2); if (err_code < 0) - return; + return err_code; if (0) { /* fixed dark-gain */ data[1] = 0; /* reg 94, Y Gain (1.75) */ @@ -240,13 +241,13 @@ static void sd_start(struct gspca_dev *gspca_dev) err_code = reg_w(gspca_dev, data[0], 6); if (err_code < 0) - return; + return err_code; data[0] = 0x67; data[1] = 0x13; /* reg 103, first pixel B, disable sharpness */ err_code = reg_w(gspca_dev, data[0], 2); if (err_code < 0) - return; + return err_code; /* * initialize the value of MI sensor... @@ -326,6 +327,7 @@ static void sd_start(struct gspca_dev *gspca_dev) data[0] = 0x00; data[1] = 0x4d; /* ISOC transfering enable... */ reg_w(gspca_dev, data[0], 2); + return err_code; } static void sd_stopN(struct gspca_dev *gspca_dev) diff --git a/drivers/media/video/gspca/ov519.c b/drivers/media/video/gspca/ov519.c index 4df4eec..ca67119 100644 --- a/drivers/media/video/gspca/ov519.c +++ b/drivers/media/video/gspca/ov519.c @@ -1854,7 +1854,7 @@ static int set_ov_sensor_window(struct sd *sd) } /* -- start the camera -- */ -static void sd_start(struct gspca_dev *gspca_dev) +static int sd_start(struct gspca_dev *gspca_dev) { struct sd *sd = (struct sd *) gspca_dev; int ret; @@ -1871,9 +1871,10 @@ static void sd_start(struct gspca_dev *gspca_dev) goto out; PDEBUG(D_STREAM, "camera started alt: 0x%02x", gspca_dev->alt); ov51x_led_control(sd, 1); - return; + return 0; out: PDEBUG(D_ERR, "camera start error:%d", ret); + return ret; } static void sd_stopN(struct gspca_dev *gspca_dev) diff --git a/drivers/media/video/gspca/pac207.c b/drivers/media/video/gspca/pac207.c index 34e923d..0b0c573 100644 --- a/drivers/media/video/gspca/pac207.c +++ b/drivers/media/video/gspca/pac207.c @@ -281,7 +281,7 @@ static int sd_init(struct gspca_dev *gspca_dev) } /* -- start the camera -- */ -static void sd_start(struct gspca_dev *gspca_dev) +static int sd_start(struct gspca_dev *gspca_dev) { struct sd *sd = (struct sd *) gspca_dev; __u8 mode; @@ -323,6 +323,7 @@ static void sd_start(struct gspca_dev *gspca_dev) sd->sof_read = 0; sd->autogain_ignore_frames = 0; atomic_set(&sd->avg_lum, -1); + return 0; } static void sd_stopN(struct gspca_dev *gspca_dev) diff --git a/drivers/media/video/gspca/pac7311.c b/drivers/media/video/gspca/pac7311.c index ba865b7..e5ff9a6 100644 --- a/drivers/media/video/gspca/pac7311.c +++ b/drivers/media/video/gspca/pac7311.c @@ -675,7 +675,7 @@ static int sd_init(struct gspca_dev *gspca_dev) return 0; } -static void sd_start(struct gspca_dev *gspca_dev) +static int sd_start(struct gspca_dev *gspca_dev) { struct sd *sd = (struct sd *) gspca_dev; @@ -724,6 +724,7 @@ static void sd_start(struct gspca_dev *gspca_dev) reg_w(gspca_dev, 0x78, 0x01); else reg_w(gspca_dev, 0x78, 0x05); + return 0; } static void sd_stopN(struct gspca_dev *gspca_dev) diff --git a/drivers/media/video/gspca/sonixb.c b/drivers/media/video/gspca/sonixb.c index 4328ad4..6c69bc7 100644 --- a/drivers/media/video/gspca/sonixb.c +++ b/drivers/media/video/gspca/sonixb.c @@ -892,7 +892,7 @@ static int sd_init(struct gspca_dev *gspca_dev) } /* -- start the camera -- */ -static void sd_start(struct gspca_dev *gspca_dev) +static int sd_start(struct gspca_dev *gspca_dev) { struct sd *sd = (struct sd *) gspca_dev; struct cam *cam = &gspca_dev->cam; @@ -976,6 +976,7 @@ static void sd_start(struct gspca_dev *gspca_dev) sd->frames_to_drop = 0; sd->autogain_ignore_frames = 0; atomic_set(&sd->avg_lum, -1); + return 0; } static void sd_stopN(struct gspca_dev *gspca_dev) diff --git a/drivers/media/video/gspca/sonixj.c b/drivers/media/video/gspca/sonixj.c index 2ca4d9f..9c6a874 100644 --- a/drivers/media/video/gspca/sonixj.c +++ b/drivers/media/video/gspca/sonixj.c @@ -1203,7 +1203,7 @@ static void setvflip(struct sd *sd) } /* -- start the camera -- */ -static void sd_start(struct gspca_dev *gspca_dev) +static int sd_start(struct gspca_dev *gspca_dev) { struct sd *sd = (struct sd *) gspca_dev; int i; @@ -1357,6 +1357,7 @@ static void sd_start(struct gspca_dev *gspca_dev) } setautogain(gspca_dev); reg_w1(gspca_dev, 0x01, reg1); + return 0; } static void sd_stopN(struct gspca_dev *gspca_dev) diff --git a/drivers/media/video/gspca/spca500.c b/drivers/media/video/gspca/spca500.c index 6e73390..bca106c 100644 --- a/drivers/media/video/gspca/spca500.c +++ b/drivers/media/video/gspca/spca500.c @@ -660,7 +660,7 @@ static int sd_init(struct gspca_dev *gspca_dev) return 0; } -static void sd_start(struct gspca_dev *gspca_dev) +static int sd_start(struct gspca_dev *gspca_dev) { struct sd *sd = (struct sd *) gspca_dev; int err; @@ -867,6 +867,7 @@ static void sd_start(struct gspca_dev *gspca_dev) write_vector(gspca_dev, Clicksmart510_defaults); break; } + return 0; } static void sd_stopN(struct gspca_dev *gspca_dev) diff --git a/drivers/media/video/gspca/spca501.c b/drivers/media/video/gspca/spca501.c index e9eb59b..b742f26 100644 --- a/drivers/media/video/gspca/spca501.c +++ b/drivers/media/video/gspca/spca501.c @@ -1980,7 +1980,7 @@ static int sd_init(struct gspca_dev *gspca_dev) return 0; } -static void sd_start(struct gspca_dev *gspca_dev) +static int sd_start(struct gspca_dev *gspca_dev) { struct usb_device *dev = gspca_dev->dev; int mode; @@ -2012,6 +2012,7 @@ static void sd_start(struct gspca_dev *gspca_dev) setbrightness(gspca_dev); setcontrast(gspca_dev); setcolors(gspca_dev); + return 0; } static void sd_stopN(struct gspca_dev *gspca_dev) diff --git a/drivers/media/video/gspca/spca505.c b/drivers/media/video/gspca/spca505.c index f601daf..b345749 100644 --- a/drivers/media/video/gspca/spca505.c +++ b/drivers/media/video/gspca/spca505.c @@ -688,7 +688,7 @@ static int sd_init(struct gspca_dev *gspca_dev) return 0; } -static void sd_start(struct gspca_dev *gspca_dev) +static int sd_start(struct gspca_dev *gspca_dev) { struct usb_device *dev = gspca_dev->dev; int ret; @@ -733,6 +733,7 @@ static void sd_start(struct gspca_dev *gspca_dev) /* reg_write(dev, 0x5, 0x0, 0x0); */ /* reg_write(dev, 0x5, 0x0, 0x1); */ /* reg_write(dev, 0x5, 0x11, 0x2); */ + return ret; } static void sd_stopN(struct gspca_dev *gspca_dev) diff --git a/drivers/media/video/gspca/spca506.c b/drivers/media/video/gspca/spca506.c index 195dce9..645ee9d 100644 --- a/drivers/media/video/gspca/spca506.c +++ b/drivers/media/video/gspca/spca506.c @@ -422,7 +422,7 @@ static int sd_init(struct gspca_dev *gspca_dev) return 0; } -static void sd_start(struct gspca_dev *gspca_dev) +static int sd_start(struct gspca_dev *gspca_dev) { struct usb_device *dev = gspca_dev->dev; __u16 norme; @@ -549,6 +549,7 @@ static void sd_start(struct gspca_dev *gspca_dev) PDEBUG(D_STREAM, "webcam started"); spca506_GetNormeInput(gspca_dev, &norme, &channel); spca506_SetNormeInput(gspca_dev, norme, channel); + return 0; } static void sd_stopN(struct gspca_dev *gspca_dev) diff --git a/drivers/media/video/gspca/spca508.c b/drivers/media/video/gspca/spca508.c index 281ce02..63ec902 100644 --- a/drivers/media/video/gspca/spca508.c +++ b/drivers/media/video/gspca/spca508.c @@ -1528,7 +1528,7 @@ static int sd_init(struct gspca_dev *gspca_dev) return 0; } -static void sd_start(struct gspca_dev *gspca_dev) +static int sd_start(struct gspca_dev *gspca_dev) { int mode; @@ -1546,6 +1546,7 @@ static void sd_start(struct gspca_dev *gspca_dev) break; } reg_write(gspca_dev->dev, 0x8112, 0x10 | 0x20); + return 0; } static void sd_stopN(struct gspca_dev *gspca_dev) diff --git a/drivers/media/video/gspca/spca561.c b/drivers/media/video/gspca/spca561.c index 4d8e2c0..29089d9 100644 --- a/drivers/media/video/gspca/spca561.c +++ b/drivers/media/video/gspca/spca561.c @@ -699,7 +699,7 @@ static void setautogain(struct gspca_dev *gspca_dev) sd->ag_cnt = -1; } -static void sd_start_12a(struct gspca_dev *gspca_dev) +static int sd_start_12a(struct gspca_dev *gspca_dev) { struct usb_device *dev = gspca_dev->dev; int Clck = 0x8a; /* lower 0x8X values lead to fps > 30 */ @@ -725,8 +725,9 @@ static void sd_start_12a(struct gspca_dev *gspca_dev) setwhite(gspca_dev); setautogain(gspca_dev); setexposure(gspca_dev); + return 0; } -static void sd_start_72a(struct gspca_dev *gspca_dev) +static int sd_start_72a(struct gspca_dev *gspca_dev) { struct usb_device *dev = gspca_dev->dev; int Clck; @@ -750,6 +751,7 @@ static void sd_start_72a(struct gspca_dev *gspca_dev) reg_w_val(dev, 0x8700, Clck); /* 0x27 clock */ reg_w_val(dev, 0x8112, 0x10 | 0x20); setautogain(gspca_dev); + return 0; } static void sd_stopN(struct gspca_dev *gspca_dev) diff --git a/drivers/media/video/gspca/stk014.c b/drivers/media/video/gspca/stk014.c index 2f2de42..d9d6491 100644 --- a/drivers/media/video/gspca/stk014.c +++ b/drivers/media/video/gspca/stk014.c @@ -324,7 +324,7 @@ static int sd_init(struct gspca_dev *gspca_dev) } /* -- start the camera -- */ -static void sd_start(struct gspca_dev *gspca_dev) +static int sd_start(struct gspca_dev *gspca_dev) { int ret, value; @@ -374,9 +374,10 @@ static void sd_start(struct gspca_dev *gspca_dev) set_par(gspca_dev, 0x01000000); set_par(gspca_dev, 0x01000000); PDEBUG(D_STREAM, "camera started alt: 0x%02x", gspca_dev->alt); - return; + return 0; out: PDEBUG(D_ERR|D_STREAM, "camera start err %d", ret); + return ret; } static void sd_stopN(struct gspca_dev *gspca_dev) diff --git a/drivers/media/video/gspca/sunplus.c b/drivers/media/video/gspca/sunplus.c index 1cfcc6c..bd92886 100644 --- a/drivers/media/video/gspca/sunplus.c +++ b/drivers/media/video/gspca/sunplus.c @@ -961,7 +961,7 @@ static int sd_init(struct gspca_dev *gspca_dev) return 0; } -static void sd_start(struct gspca_dev *gspca_dev) +static int sd_start(struct gspca_dev *gspca_dev) { struct sd *sd = (struct sd *) gspca_dev; struct usb_device *dev = gspca_dev->dev; @@ -1042,6 +1042,7 @@ static void sd_start(struct gspca_dev *gspca_dev) break; } sp5xx_initContBrigHueRegisters(gspca_dev); + return 0; } static void sd_stopN(struct gspca_dev *gspca_dev) diff --git a/drivers/media/video/gspca/t613.c b/drivers/media/video/gspca/t613.c index f034c74..78c6742 100644 --- a/drivers/media/video/gspca/t613.c +++ b/drivers/media/video/gspca/t613.c @@ -849,7 +849,7 @@ static int sd_getlowlight(struct gspca_dev *gspca_dev, __s32 *val) return 0; } -static void sd_start(struct gspca_dev *gspca_dev) +static int sd_start(struct gspca_dev *gspca_dev) { int mode; @@ -898,6 +898,7 @@ static void sd_start(struct gspca_dev *gspca_dev) setbrightness(gspca_dev); setcontrast(gspca_dev); setcolors(gspca_dev); + return 0; } static void sd_pkt_scan(struct gspca_dev *gspca_dev, diff --git a/drivers/media/video/gspca/tv8532.c b/drivers/media/video/gspca/tv8532.c index 084af05..968a591 100644 --- a/drivers/media/video/gspca/tv8532.c +++ b/drivers/media/video/gspca/tv8532.c @@ -390,7 +390,7 @@ static void setbrightness(struct gspca_dev *gspca_dev) } /* -- start the camera -- */ -static void sd_start(struct gspca_dev *gspca_dev) +static int sd_start(struct gspca_dev *gspca_dev) { reg_w_1(gspca_dev, TV8532_AD_SLOPE, 0x32); reg_w_1(gspca_dev, TV8532_AD_BITCTRL, 0x00); @@ -443,6 +443,7 @@ static void sd_start(struct gspca_dev *gspca_dev) /************************************************/ tv_8532_PollReg(gspca_dev); reg_w_1(gspca_dev, TV8532_UDP_UPDATE, 0x00); /* 0x31 */ + return 0; } static void sd_stopN(struct gspca_dev *gspca_dev) diff --git a/drivers/media/video/gspca/vc032x.c b/drivers/media/video/gspca/vc032x.c index 0c68f43..be46d92 100644 --- a/drivers/media/video/gspca/vc032x.c +++ b/drivers/media/video/gspca/vc032x.c @@ -1501,7 +1501,7 @@ static void setlightfreq(struct gspca_dev *gspca_dev) usb_exchange(gspca_dev, ov7660_freq_tb[sd->lightfreq]); } -static void sd_start(struct gspca_dev *gspca_dev) +static int sd_start(struct gspca_dev *gspca_dev) { struct sd *sd = (struct sd *) gspca_dev; const __u8 *GammaT = NULL; @@ -1585,7 +1585,7 @@ static void sd_start(struct gspca_dev *gspca_dev) break; default: PDEBUG(D_PROBE, "Damned !! no sensor found Bye"); - return; + return -EMEDIUMTYPE; } if (GammaT && MatrixT) { put_tab_to_reg(gspca_dev, GammaT, 17, 0xb84a); @@ -1621,6 +1621,7 @@ static void sd_start(struct gspca_dev *gspca_dev) setautogain(gspca_dev); setlightfreq(gspca_dev); } + return 0; } static void sd_stopN(struct gspca_dev *gspca_dev) diff --git a/drivers/media/video/gspca/zc3xx.c b/drivers/media/video/gspca/zc3xx.c index d61ef72..d0a4451 100644 --- a/drivers/media/video/gspca/zc3xx.c +++ b/drivers/media/video/gspca/zc3xx.c @@ -7178,7 +7178,7 @@ static int sd_init(struct gspca_dev *gspca_dev) return 0; } -static void sd_start(struct gspca_dev *gspca_dev) +static int sd_start(struct gspca_dev *gspca_dev) { struct sd *sd = (struct sd *) gspca_dev; struct usb_device *dev = gspca_dev->dev; @@ -7331,6 +7331,7 @@ static void sd_start(struct gspca_dev *gspca_dev) reg_w(dev, 0x02, 0x0008); break; } + return 0; } static void sd_stop0(struct gspca_dev *gspca_dev) -- cgit v0.10.2 From 9f4c0617edcc676a5281c04bf48a305b80dd5397 Mon Sep 17 00:00:00 2001 From: Jean-Francois Moine Date: Mon, 22 Sep 2008 02:57:56 -0300 Subject: V4L/DVB (9081): gspca: Bad webcam name of 046d:092f in documentation. Signed-off-by: Jean-Francois Moine Signed-off-by: Mauro Carvalho Chehab diff --git a/Documentation/video4linux/gspca.txt b/Documentation/video4linux/gspca.txt index 308ce4e..a845667 100644 --- a/Documentation/video4linux/gspca.txt +++ b/Documentation/video4linux/gspca.txt @@ -82,7 +82,7 @@ spca561 046d:092b Labtec Webcam Plus spca561 046d:092c Logitech QC chat Elch2 spca561 046d:092d Logitech QC Elch2 spca561 046d:092e Logitech QC Elch2 -spca561 046d:092f Logitech QC Elch2 +spca561 046d:092f Logitech QuickCam Express Plus sunplus 046d:0960 Logitech ClickSmart 420 sunplus 0471:0322 Philips DMVC1300K zc3xx 0471:0325 Philips SPC 200 NC -- cgit v0.10.2 From 40e6ec129100041121aea2fb98590eaea4bb6ba2 Mon Sep 17 00:00:00 2001 From: Jean-Francois Moine Date: Mon, 22 Sep 2008 03:14:25 -0300 Subject: V4L/DVB (9082): gspca: Vertical flip the image by default in sonixj. Signed-off-by: Jean-Francois Moine Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/gspca/sonixj.c b/drivers/media/video/gspca/sonixj.c index 9c6a874..03fe77d 100644 --- a/drivers/media/video/gspca/sonixj.c +++ b/drivers/media/video/gspca/sonixj.c @@ -144,7 +144,7 @@ static struct ctrl sd_ctrls[] = { .minimum = 0, .maximum = 1, .step = 1, -#define VFLIP_DEF 0 +#define VFLIP_DEF 1 .default_value = VFLIP_DEF, }, .set = sd_setvflip, -- cgit v0.10.2 From 3b11fa3a0651984af60cb8ff8faf0338552ece1f Mon Sep 17 00:00:00 2001 From: Jean-Francois Moine Date: Fri, 26 Sep 2008 05:52:52 -0300 Subject: V4L/DVB (9083): gspca: URB_NO_TRANSFER_DMA_MAP is not useful for isoc transfers. Signed-off-by: Jean-Francois Moine Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/gspca/gspca.c b/drivers/media/video/gspca/gspca.c index a286b91..f130bb7 100644 --- a/drivers/media/video/gspca/gspca.c +++ b/drivers/media/video/gspca/gspca.c @@ -540,8 +540,7 @@ static int create_urbs(struct gspca_dev *gspca_dev, if (npkt != 0) { /* ISOC */ urb->pipe = usb_rcvisocpipe(gspca_dev->dev, ep->desc.bEndpointAddress); - urb->transfer_flags = URB_ISO_ASAP - | URB_NO_TRANSFER_DMA_MAP; + urb->transfer_flags = URB_ISO_ASAP; urb->interval = ep->desc.bInterval; urb->complete = isoc_irq; urb->number_of_packets = npkt; -- cgit v0.10.2 From 219423c147f6d4bc91ec904debfbc556887bd8fe Mon Sep 17 00:00:00 2001 From: Frank Zago Date: Fri, 26 Sep 2008 07:43:54 -0300 Subject: V4L/DVB (9084): gspca: Fixed a few typos in comments. Signed-off-by: Frank Zago Signed-off-by: Jean-Francois Moine Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/gspca/gspca.c b/drivers/media/video/gspca/gspca.c index f130bb7..06e5015 100644 --- a/drivers/media/video/gspca/gspca.c +++ b/drivers/media/video/gspca/gspca.c @@ -278,7 +278,7 @@ struct gspca_frame *gspca_frame_add(struct gspca_dev *gspca_dev, } gspca_dev->last_packet_type = packet_type; - /* if last packet, wake the application and advance in the queue */ + /* if last packet, wake up the application and advance in the queue */ if (packet_type == LAST_PACKET) { frame->v4l2_buf.bytesused = frame->data_end - frame->data; frame->v4l2_buf.flags &= ~V4L2_BUF_FLAG_QUEUED; @@ -420,7 +420,7 @@ static void destroy_urbs(struct gspca_dev *gspca_dev) } /* - * search an input transfer endpoint in an alternate setting + * look for an input transfer endpoint in an alternate setting */ static struct usb_host_endpoint *alt_xfer(struct usb_host_interface *alt, __u8 epaddr, @@ -444,7 +444,7 @@ static struct usb_host_endpoint *alt_xfer(struct usb_host_interface *alt, } /* - * search an input (isoc or bulk) endpoint + * look for an input (isoc or bulk) endpoint * * The endpoint is defined by the subdriver. * Use only the first isoc (some Zoran - 0x0572:0x0001 - have two such ep). @@ -591,7 +591,7 @@ static int gspca_init_transfer(struct gspca_dev *gspca_dev) gspca_dev->streaming = 1; atomic_set(&gspca_dev->nevent, 0); - /* start the bulk transfer is done by the subdriver */ + /* bulk transfers are started by the subdriver */ if (gspca_dev->bulk) break; @@ -626,7 +626,7 @@ static int gspca_set_alt0(struct gspca_dev *gspca_dev) return ret; } -/* Note both the queue and the usb lock should be hold when calling this */ +/* Note: both the queue and the usb locks should be held when calling this */ static void gspca_stream_off(struct gspca_dev *gspca_dev) { gspca_dev->streaming = 0; @@ -1685,7 +1685,7 @@ static ssize_t dev_read(struct file *file, char __user *data, } /* if the process slept for more than 1 second, - * get anewer frame */ + * get a newer frame */ frame = &gspca_dev->frame[v4l2_buf.index]; if (--n < 0) break; /* avoid infinite loop */ -- cgit v0.10.2 From 6c49da7f169c25eb39b80ff168f5bdbacf8457e1 Mon Sep 17 00:00:00 2001 From: Frank Zago Date: Sun, 28 Sep 2008 07:43:00 -0300 Subject: V4L/DVB (9085): gspca: URB_NO_TRANSFER_DMA_MAP is required for isoc and bulk transfers. Signed-off-by: Frank Zago Signed-off-by: Jean-Francois Moine Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/gspca/gspca.c b/drivers/media/video/gspca/gspca.c index 06e5015..3f0fd44 100644 --- a/drivers/media/video/gspca/gspca.c +++ b/drivers/media/video/gspca/gspca.c @@ -540,7 +540,8 @@ static int create_urbs(struct gspca_dev *gspca_dev, if (npkt != 0) { /* ISOC */ urb->pipe = usb_rcvisocpipe(gspca_dev->dev, ep->desc.bEndpointAddress); - urb->transfer_flags = URB_ISO_ASAP; + urb->transfer_flags = URB_ISO_ASAP + | URB_NO_TRANSFER_DMA_MAP; urb->interval = ep->desc.bInterval; urb->complete = isoc_irq; urb->number_of_packets = npkt; @@ -551,6 +552,7 @@ static int create_urbs(struct gspca_dev *gspca_dev, } else { /* bulk */ urb->pipe = usb_rcvbulkpipe(gspca_dev->dev, ep->desc.bEndpointAddress), + urb->transfer_flags = URB_NO_TRANSFER_DMA_MAP; urb->complete = bulk_irq; } } -- cgit v0.10.2 From 6b060ffea0722cfe4f5156a73a6424130d3d804a Mon Sep 17 00:00:00 2001 From: Frank Zago Date: Sun, 28 Sep 2008 08:12:22 -0300 Subject: V4L/DVB (9086): gspca: Use a kref to avoid potentialy blocking forever in disconnect. Signed-off-by: Frank Zago Signed-off-by: Jean-Francois Moine Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/gspca/gspca.c b/drivers/media/video/gspca/gspca.c index 3f0fd44..342a0f3 100644 --- a/drivers/media/video/gspca/gspca.c +++ b/drivers/media/video/gspca/gspca.c @@ -29,6 +29,7 @@ #include #include #include +#include #include #include #include @@ -834,6 +835,16 @@ out: return ret; } +static void gspca_delete(struct kref *kref) +{ + struct gspca_dev *gspca_dev = container_of(kref, struct gspca_dev, kref); + + PDEBUG(D_STREAM, "device deleted"); + + kfree(gspca_dev->usb_buf); + kfree(gspca_dev); +} + static int dev_open(struct inode *inode, struct file *file) { struct gspca_dev *gspca_dev; @@ -853,6 +864,10 @@ static int dev_open(struct inode *inode, struct file *file) goto out; } gspca_dev->users++; + + /* one more user */ + kref_get(&gspca_dev->kref); + file->private_data = gspca_dev; #ifdef GSPCA_DEBUG /* activate the v4l2 debug */ @@ -895,7 +910,11 @@ static int dev_close(struct inode *inode, struct file *file) } file->private_data = NULL; mutex_unlock(&gspca_dev->queue_lock); + PDEBUG(D_STREAM, "close done"); + + kref_put(&gspca_dev->kref, gspca_delete); + return 0; } @@ -1809,6 +1828,7 @@ int gspca_dev_probe(struct usb_interface *intf, err("couldn't kzalloc gspca struct"); return -EIO; } + kref_init(&gspca_dev->kref); gspca_dev->usb_buf = kmalloc(USB_BUF_SZ, GFP_KERNEL); if (!gspca_dev->usb_buf) { err("out of memory"); @@ -1858,8 +1878,7 @@ int gspca_dev_probe(struct usb_interface *intf, PDEBUG(D_PROBE, "probe ok"); return 0; out: - kfree(gspca_dev->usb_buf); - kfree(gspca_dev); + kref_put(&gspca_dev->kref, gspca_delete); return ret; } EXPORT_SYMBOL(gspca_dev_probe); @@ -1874,8 +1893,8 @@ void gspca_disconnect(struct usb_interface *intf) { struct gspca_dev *gspca_dev = usb_get_intfdata(intf); - if (!gspca_dev) - return; + usb_set_intfdata(intf, NULL); + gspca_dev->present = 0; mutex_lock(&gspca_dev->queue_lock); mutex_lock(&gspca_dev->usb_lock); @@ -1883,16 +1902,12 @@ void gspca_disconnect(struct usb_interface *intf) destroy_urbs(gspca_dev); mutex_unlock(&gspca_dev->usb_lock); mutex_unlock(&gspca_dev->queue_lock); - while (gspca_dev->users != 0) { /* wait until fully closed */ - atomic_inc(&gspca_dev->nevent); - wake_up_interruptible(&gspca_dev->wq); /* wake processes */ - schedule(); - } + /* We don't want people trying to open up the device */ video_unregister_device(&gspca_dev->vdev); -/* Free the memory */ - kfree(gspca_dev->usb_buf); - kfree(gspca_dev); + + kref_put(&gspca_dev->kref, gspca_delete); + PDEBUG(D_PROBE, "disconnect complete"); } EXPORT_SYMBOL(gspca_disconnect); diff --git a/drivers/media/video/gspca/gspca.h b/drivers/media/video/gspca/gspca.h index b0bdae1..192dffd 100644 --- a/drivers/media/video/gspca/gspca.h +++ b/drivers/media/video/gspca/gspca.h @@ -121,6 +121,7 @@ struct gspca_dev { struct video_device vdev; /* !! must be the first item */ struct file_operations fops; struct usb_device *dev; + struct kref kref; struct file *capt_file; /* file doing video capture */ struct cam cam; /* device information */ -- cgit v0.10.2 From 95d9142c8b250b2ce0e0a283fdf54d899dcc4f3e Mon Sep 17 00:00:00 2001 From: Jean-Francois Moine Date: Mon, 29 Sep 2008 05:57:32 -0300 Subject: V4L/DVB (9087): gspca: Image transfer by bulk uses altsetting 0 with any buffer size. - gspca_dev field 'bulk_size' added. - when only one altsetting usable, do image transfer by bulk. Signed-off-by: Jean-Francois Moine Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/gspca/gspca.c b/drivers/media/video/gspca/gspca.c index 342a0f3..02824fc 100644 --- a/drivers/media/video/gspca/gspca.c +++ b/drivers/media/video/gspca/gspca.c @@ -461,25 +461,34 @@ static struct usb_host_endpoint *get_ep(struct gspca_dev *gspca_dev) intf = usb_ifnum_to_if(gspca_dev->dev, gspca_dev->iface); ep = NULL; i = gspca_dev->alt; /* previous alt setting */ + + /* try isoc */ while (--i > 0) { /* alt 0 is unusable */ ep = alt_xfer(&intf->altsetting[i], gspca_dev->cam.epaddr, - gspca_dev->bulk - ? USB_ENDPOINT_XFER_BULK - : USB_ENDPOINT_XFER_ISOC); + USB_ENDPOINT_XFER_ISOC); if (ep) break; } + + /* if no isoc, try bulk */ if (ep == NULL) { - err("no transfer endpoint found"); - return NULL; + ep = alt_xfer(&intf->altsetting[0], + gspca_dev->cam.epaddr, + USB_ENDPOINT_XFER_BULK); + if (ep == NULL) { + err("no transfer endpoint found"); + return NULL; + } } PDEBUG(D_STREAM, "use alt %d ep 0x%02x", i, ep->desc.bEndpointAddress); - ret = usb_set_interface(gspca_dev->dev, gspca_dev->iface, i); - if (ret < 0) { - err("set interface err %d", ret); - return NULL; + if (i > 0) { + ret = usb_set_interface(gspca_dev->dev, gspca_dev->iface, i); + if (ret < 0) { + err("set interface err %d", ret); + return NULL; + } } gspca_dev->alt = i; /* memorize the current alt setting */ return ep; @@ -497,9 +506,10 @@ static int create_urbs(struct gspca_dev *gspca_dev, /* calculate the packet size and the number of packets */ psize = le16_to_cpu(ep->desc.wMaxPacketSize); - /* See paragraph 5.9 / table 5-11 of the usb 2.0 spec. */ - psize = (psize & 0x07ff) * (1 + ((psize >> 11) & 3)); - if (!gspca_dev->bulk) { + if (gspca_dev->alt != 0) { /* isoc */ + + /* See paragraph 5.9 / table 5-11 of the usb 2.0 spec. */ + psize = (psize & 0x07ff) * (1 + ((psize >> 11) & 3)); npkt = ISO_MAX_SIZE / psize; if (npkt > ISO_MAX_PKT) npkt = ISO_MAX_PKT; @@ -508,9 +518,11 @@ static int create_urbs(struct gspca_dev *gspca_dev, "isoc %d pkts size %d = bsize:%d", npkt, psize, bsize); nurbs = DEF_NURBS; - } else { + } else { /* bulk */ npkt = 0; - bsize = psize; + bsize = gspca_dev->cam. bulk_size; + if (bsize == 0) + bsize = psize; PDEBUG(D_STREAM, "bulk bsize:%d", bsize); nurbs = 1; } @@ -595,7 +607,7 @@ static int gspca_init_transfer(struct gspca_dev *gspca_dev) atomic_set(&gspca_dev->nevent, 0); /* bulk transfers are started by the subdriver */ - if (gspca_dev->bulk) + if (gspca_dev->alt == 0) break; /* submit the URBs */ diff --git a/drivers/media/video/gspca/gspca.h b/drivers/media/video/gspca/gspca.h index 192dffd..f900654 100644 --- a/drivers/media/video/gspca/gspca.h +++ b/drivers/media/video/gspca/gspca.h @@ -56,6 +56,7 @@ extern int gspca_debug; /* device information - set at probe time */ struct cam { + int bulk_size; /* buffer size when image transfer by bulk */ struct v4l2_pix_format *cam_mode; /* size nmodes */ char nmodes; __u8 epaddr; @@ -144,7 +145,6 @@ struct gspca_dev { __u8 iface; /* USB interface number */ __u8 alt; /* USB alternate setting */ - __u8 bulk; /* image transfer by isoc (0) or bulk (1) */ __u8 curr_mode; /* current camera mode */ __u32 pixfmt; /* current mode parameters */ __u16 width; -- cgit v0.10.2 From 97076859590ada76dc4bee46b6ccad86d89e82cf Mon Sep 17 00:00:00 2001 From: Frank Zago Date: Mon, 29 Sep 2008 06:59:36 -0300 Subject: V4L/DVB (9088): gspca: New subdriver 'finepix' added. Signed-off-by: Frank Zago Signed-off-by: Jean-Francois Moine Signed-off-by: Mauro Carvalho Chehab diff --git a/Documentation/video4linux/gspca.txt b/Documentation/video4linux/gspca.txt index a845667..04c612e 100644 --- a/Documentation/video4linux/gspca.txt +++ b/Documentation/video4linux/gspca.txt @@ -97,6 +97,29 @@ sunplus 04a5:3003 Benq DC 1300 sunplus 04a5:3008 Benq DC 1500 sunplus 04a5:300a Benq DC 3410 spca500 04a5:300c Benq DC 1016 +finepix 04cb:0104 Fujifilm FinePix 4800 +finepix 04cb:0109 Fujifilm FinePix A202 +finepix 04cb:010b Fujifilm FinePix A203 +finepix 04cb:010f Fujifilm FinePix A204 +finepix 04cb:0111 Fujifilm FinePix A205 +finepix 04cb:0113 Fujifilm FinePix A210 +finepix 04cb:0115 Fujifilm FinePix A303 +finepix 04cb:0117 Fujifilm FinePix A310 +finepix 04cb:0119 Fujifilm FinePix F401 +finepix 04cb:011b Fujifilm FinePix F402 +finepix 04cb:011d Fujifilm FinePix F410 +finepix 04cb:0121 Fujifilm FinePix F601 +finepix 04cb:0123 Fujifilm FinePix F700 +finepix 04cb:0125 Fujifilm FinePix M603 +finepix 04cb:0127 Fujifilm FinePix S300 +finepix 04cb:0129 Fujifilm FinePix S304 +finepix 04cb:012b Fujifilm FinePix S500 +finepix 04cb:012d Fujifilm FinePix S602 +finepix 04cb:012f Fujifilm FinePix S700 +finepix 04cb:0131 Fujifilm FinePix unknown model +finepix 04cb:013b Fujifilm FinePix unknown model +finepix 04cb:013d Fujifilm FinePix unknown model +finepix 04cb:013f Fujifilm FinePix F420 sunplus 04f1:1001 JVC GC A50 spca561 04fc:0561 Flexcam 100 sunplus 04fc:500c Sunplus CA500C diff --git a/drivers/media/video/gspca/Makefile b/drivers/media/video/gspca/Makefile index e68a896..78bad04 100644 --- a/drivers/media/video/gspca/Makefile +++ b/drivers/media/video/gspca/Makefile @@ -1,5 +1,5 @@ obj-$(CONFIG_USB_GSPCA) += gspca_main.o \ - gspca_conex.o gspca_etoms.o gspca_mars.o \ + gspca_conex.o gspca_etoms.o gspca_finepix.o gspca_mars.o \ gspca_ov519.o gspca_pac207.o gspca_pac7311.o \ gspca_sonixb.o gspca_sonixj.o gspca_spca500.o gspca_spca501.o \ gspca_spca505.o gspca_spca506.o gspca_spca508.o gspca_spca561.o \ @@ -9,6 +9,7 @@ obj-$(CONFIG_USB_GSPCA) += gspca_main.o \ gspca_main-objs := gspca.o gspca_conex-objs := conex.o gspca_etoms-objs := etoms.o +gspca_finepix-objs := finepix.o gspca_mars-objs := mars.o gspca_ov519-objs := ov519.o gspca_pac207-objs := pac207.o diff --git a/drivers/media/video/gspca/finepix.c b/drivers/media/video/gspca/finepix.c new file mode 100644 index 0000000..f75db95 --- /dev/null +++ b/drivers/media/video/gspca/finepix.c @@ -0,0 +1,465 @@ +/* + * Fujifilm Finepix subdriver + * + * Copyright (C) 2008 Frank Zago + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#define MODULE_NAME "finepix" + +#include "gspca.h" + +MODULE_AUTHOR("Frank Zago "); +MODULE_DESCRIPTION("Fujifilm FinePix USB V4L2 driver"); +MODULE_LICENSE("GPL"); + +/* Default timeout, in ms */ +#define FPIX_TIMEOUT (HZ / 10) + +/* Maximum transfer size to use. The windows driver reads by chunks of + * 0x2000 bytes, so do the same. Note: reading more seems to work + * too. */ +#define FPIX_MAX_TRANSFER 0x2000 + +/* Structure to hold all of our device specific stuff */ +struct usb_fpix { + struct gspca_dev gspca_dev; /* !! must be the first item */ + + /* + * USB stuff + */ + struct usb_ctrlrequest ctrlreq; + struct urb *control_urb; + struct timer_list bulk_timer; + + enum { + FPIX_NOP, /* inactive, else streaming */ + FPIX_RESET, /* must reset */ + FPIX_REQ_FRAME, /* requesting a frame */ + FPIX_READ_FRAME, /* reading frame */ + } state; + + /* + * Driver stuff + */ + struct delayed_work wqe; + struct completion can_close; + int streaming; +}; + +/* Delay after which claim the next frame. If the delay is too small, + * the camera will return old frames. On the 4800Z, 20ms is bad, 25ms + * will fail every 4 or 5 frames, but 30ms is perfect. */ +#define NEXT_FRAME_DELAY (((HZ * 30) + 999) / 1000) + +#define dev_new_state(new_state) { \ + PDEBUG(D_STREAM, "new state from %d to %d at %s:%d", \ + dev->state, new_state, __func__, __LINE__); \ + dev->state = new_state; \ +} + +/* These cameras only support 320x200. */ +static struct v4l2_pix_format fpix_mode[1] = { + { 320, 240, V4L2_PIX_FMT_JPEG, V4L2_FIELD_NONE, + .bytesperline = 320, + .sizeimage = 320 * 240 * 3 / 8 + 590, + .colorspace = V4L2_COLORSPACE_SRGB, + .priv = 0} +}; + +/* Reads part of a frame */ +static void read_frame_part(struct usb_fpix *dev) +{ + int ret; + + PDEBUG(D_STREAM, "read_frame_part"); + + /* Reads part of a frame */ + ret = usb_submit_urb(dev->gspca_dev.urb[0], GFP_ATOMIC); + if (ret) { + dev_new_state(FPIX_RESET); + schedule_delayed_work(&dev->wqe, 1); + PDEBUG(D_STREAM, "usb_submit_urb failed with %d", + ret); + } else { + /* Sometimes we never get a callback, so use a timer. + * Is this masking a bug somewhere else? */ + dev->bulk_timer.expires = jiffies + msecs_to_jiffies(150); + add_timer(&dev->bulk_timer); + } +} + +/* Callback for URBs. */ +static void urb_callback(struct urb *urb) +{ + struct gspca_dev *gspca_dev = urb->context; + struct usb_fpix *dev = (struct usb_fpix *) gspca_dev; + + PDEBUG(D_PACK, + "enter urb_callback - status=%d, length=%d", + urb->status, urb->actual_length); + + if (dev->state == FPIX_READ_FRAME) + del_timer(&dev->bulk_timer); + + if (urb->status != 0) { + /* We kill a stuck urb every 50 frames on average, so don't + * display a log message for that. */ + if (urb->status != -ECONNRESET) + PDEBUG(D_STREAM, "bad URB status %d", urb->status); + dev_new_state(FPIX_RESET); + schedule_delayed_work(&dev->wqe, 1); + } + + switch (dev->state) { + case FPIX_REQ_FRAME: + dev_new_state(FPIX_READ_FRAME); + read_frame_part(dev); + break; + + case FPIX_READ_FRAME: { + unsigned char *data = urb->transfer_buffer; + struct gspca_frame *frame; + + frame = gspca_get_i_frame(&dev->gspca_dev); + if (frame == NULL) { + gspca_dev->last_packet_type = DISCARD_PACKET; + break; + } + if (urb->actual_length < FPIX_MAX_TRANSFER || + (data[urb->actual_length-2] == 0xff && + data[urb->actual_length-1] == 0xd9)) { + + /* If the result is less than what was asked + * for, then it's the end of the + * frame. Sometime the jpeg is not complete, + * but there's nothing we can do. We also end + * here if the the jpeg ends right at the end + * of the frame. */ + gspca_frame_add(gspca_dev, LAST_PACKET, + frame, + data, urb->actual_length); + dev_new_state(FPIX_REQ_FRAME); + schedule_delayed_work(&dev->wqe, NEXT_FRAME_DELAY); + } else { + + /* got a partial image */ + gspca_frame_add(gspca_dev, + gspca_dev->last_packet_type == LAST_PACKET + ? FIRST_PACKET : INTER_PACKET, + frame, + data, urb->actual_length); + read_frame_part(dev); + } + break; + } + + case FPIX_NOP: + case FPIX_RESET: + PDEBUG(D_STREAM, "invalid state %d", dev->state); + break; + } +} + +/* Request a new frame */ +static void request_frame(struct usb_fpix *dev) +{ + int ret; + struct gspca_dev *gspca_dev = &dev->gspca_dev; + + /* Setup command packet */ + memset(gspca_dev->usb_buf, 0, 12); + gspca_dev->usb_buf[0] = 0xd3; + gspca_dev->usb_buf[7] = 0x01; + + /* Request a frame */ + dev->ctrlreq.bRequestType = + USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE; + dev->ctrlreq.bRequest = USB_REQ_GET_STATUS; + dev->ctrlreq.wValue = 0; + dev->ctrlreq.wIndex = 0; + dev->ctrlreq.wLength = cpu_to_le16(12); + + usb_fill_control_urb(dev->control_urb, + gspca_dev->dev, + usb_sndctrlpipe(gspca_dev->dev, 0), + (unsigned char *) &dev->ctrlreq, + gspca_dev->usb_buf, + 12, urb_callback, gspca_dev); + + ret = usb_submit_urb(dev->control_urb, GFP_ATOMIC); + if (ret) { + dev_new_state(FPIX_RESET); + schedule_delayed_work(&dev->wqe, 1); + PDEBUG(D_STREAM, "usb_submit_urb failed with %d", ret); + } +} + +/*--------------------------------------------------------------------------*/ + +/* State machine. */ +static void fpix_sm(struct work_struct *work) +{ + struct usb_fpix *dev = container_of(work, struct usb_fpix, wqe.work); + + PDEBUG(D_STREAM, "fpix_sm state %d", dev->state); + + /* verify that the device wasn't unplugged */ + if (!dev->gspca_dev.present) { + PDEBUG(D_STREAM, "device is gone"); + dev_new_state(FPIX_NOP); + complete(&dev->can_close); + return; + } + + if (!dev->streaming) { + PDEBUG(D_STREAM, "stopping state machine"); + dev_new_state(FPIX_NOP); + complete(&dev->can_close); + return; + } + + switch (dev->state) { + case FPIX_RESET: + dev_new_state(FPIX_REQ_FRAME); + schedule_delayed_work(&dev->wqe, HZ / 10); + break; + + case FPIX_REQ_FRAME: + /* get an image */ + request_frame(dev); + break; + + case FPIX_NOP: + case FPIX_READ_FRAME: + PDEBUG(D_STREAM, "invalid state %d", dev->state); + break; + } +} + +/* this function is called at probe time */ +static int sd_config(struct gspca_dev *gspca_dev, + const struct usb_device_id *id) +{ + struct cam *cam = &gspca_dev->cam; + + cam->cam_mode = fpix_mode; + cam->nmodes = 1; + cam->epaddr = 0x01; /* todo: correct for all cams? */ + cam->bulk_size = FPIX_MAX_TRANSFER; + +/* gspca_dev->nbalt = 1; * use bulk transfer */ + return 0; +} + +/* Stop streaming and free the ressources allocated by sd_start. */ +static void sd_stopN(struct gspca_dev *gspca_dev) +{ + struct usb_fpix *dev = (struct usb_fpix *) gspca_dev; + + dev->streaming = 0; + + /* Stop the state machine */ + if (dev->state != FPIX_NOP) + wait_for_completion(&dev->can_close); + + usb_free_urb(dev->control_urb); + dev->control_urb = NULL; +} + +/* Kill an URB that hasn't completed. */ +static void timeout_kill(unsigned long data) +{ + struct urb *urb = (struct urb *) data; + + usb_unlink_urb(urb); +} + +/* this function is called at probe and resume time */ +static int sd_init(struct gspca_dev *gspca_dev) +{ + struct usb_fpix *dev = (struct usb_fpix *) gspca_dev; + + INIT_DELAYED_WORK(&dev->wqe, fpix_sm); + + init_timer(&dev->bulk_timer); + dev->bulk_timer.function = timeout_kill; + + return 0; +} + +static int sd_start(struct gspca_dev *gspca_dev) +{ + struct usb_fpix *dev = (struct usb_fpix *) gspca_dev; + int ret; + int size_ret; + + /* Reset bulk in endpoint */ + usb_clear_halt(gspca_dev->dev, gspca_dev->cam.epaddr); + + /* Init the device */ + memset(gspca_dev->usb_buf, 0, 12); + gspca_dev->usb_buf[0] = 0xc6; + gspca_dev->usb_buf[8] = 0x20; + + ret = usb_control_msg(gspca_dev->dev, + usb_sndctrlpipe(gspca_dev->dev, 0), + USB_REQ_GET_STATUS, + USB_DIR_OUT | USB_TYPE_CLASS | + USB_RECIP_INTERFACE, 0, 0, gspca_dev->usb_buf, + 12, FPIX_TIMEOUT); + + if (ret != 12) { + PDEBUG(D_STREAM, "usb_control_msg failed (%d)", ret); + ret = -EIO; + goto error; + } + + /* Read the result of the command. Ignore the result, for it + * varies with the device. */ + ret = usb_bulk_msg(gspca_dev->dev, + usb_rcvbulkpipe(gspca_dev->dev, + gspca_dev->cam.epaddr), + gspca_dev->usb_buf, FPIX_MAX_TRANSFER, &size_ret, + FPIX_TIMEOUT); + if (ret != 0) { + PDEBUG(D_STREAM, "usb_bulk_msg failed (%d)", ret); + ret = -EIO; + goto error; + } + + /* Request a frame, but don't read it */ + memset(gspca_dev->usb_buf, 0, 12); + gspca_dev->usb_buf[0] = 0xd3; + gspca_dev->usb_buf[7] = 0x01; + + ret = usb_control_msg(gspca_dev->dev, + usb_sndctrlpipe(gspca_dev->dev, 0), + USB_REQ_GET_STATUS, + USB_DIR_OUT | USB_TYPE_CLASS | + USB_RECIP_INTERFACE, 0, 0, gspca_dev->usb_buf, + 12, FPIX_TIMEOUT); + if (ret != 12) { + PDEBUG(D_STREAM, "usb_control_msg failed (%d)", ret); + ret = -EIO; + goto error; + } + + /* Again, reset bulk in endpoint */ + usb_clear_halt(gspca_dev->dev, gspca_dev->cam.epaddr); + + /* Allocate a control URB */ + dev->control_urb = usb_alloc_urb(0, GFP_KERNEL); + if (!dev->control_urb) { + PDEBUG(D_STREAM, "No free urbs available"); + ret = -EIO; + goto error; + } + + /* Various initializations. */ + init_completion(&dev->can_close); + dev->bulk_timer.data = (unsigned long)dev->gspca_dev.urb[0]; + dev->gspca_dev.urb[0]->complete = urb_callback; + dev->streaming = 1; + + /* Schedule a frame request. */ + dev_new_state(FPIX_REQ_FRAME); + schedule_delayed_work(&dev->wqe, 1); + + return 0; + +error: + /* Free the ressources */ + sd_stopN(gspca_dev); + return ret; +} + +/* Table of supported USB devices */ +static const __devinitdata struct usb_device_id device_table[] = { + {USB_DEVICE(0x04cb, 0x0104)}, + {USB_DEVICE(0x04cb, 0x0109)}, + {USB_DEVICE(0x04cb, 0x010b)}, + {USB_DEVICE(0x04cb, 0x010f)}, + {USB_DEVICE(0x04cb, 0x0111)}, + {USB_DEVICE(0x04cb, 0x0113)}, + {USB_DEVICE(0x04cb, 0x0115)}, + {USB_DEVICE(0x04cb, 0x0117)}, + {USB_DEVICE(0x04cb, 0x0119)}, + {USB_DEVICE(0x04cb, 0x011b)}, + {USB_DEVICE(0x04cb, 0x011d)}, + {USB_DEVICE(0x04cb, 0x0121)}, + {USB_DEVICE(0x04cb, 0x0123)}, + {USB_DEVICE(0x04cb, 0x0125)}, + {USB_DEVICE(0x04cb, 0x0127)}, + {USB_DEVICE(0x04cb, 0x0129)}, + {USB_DEVICE(0x04cb, 0x012b)}, + {USB_DEVICE(0x04cb, 0x012d)}, + {USB_DEVICE(0x04cb, 0x012f)}, + {USB_DEVICE(0x04cb, 0x0131)}, + {USB_DEVICE(0x04cb, 0x013b)}, + {USB_DEVICE(0x04cb, 0x013d)}, + {USB_DEVICE(0x04cb, 0x013f)}, + {} +}; + +MODULE_DEVICE_TABLE(usb, device_table); + +/* sub-driver description */ +static const struct sd_desc sd_desc = { + .name = MODULE_NAME, + .config = sd_config, + .init = sd_init, + .start = sd_start, + .stopN = sd_stopN, +}; + +/* -- device connect -- */ +static int sd_probe(struct usb_interface *intf, + const struct usb_device_id *id) +{ + return gspca_dev_probe(intf, id, + &sd_desc, + sizeof(struct usb_fpix), + THIS_MODULE); +} + +static struct usb_driver sd_driver = { + .name = MODULE_NAME, + .id_table = device_table, + .probe = sd_probe, + .disconnect = gspca_disconnect, +#ifdef CONFIG_PM + .suspend = gspca_suspend, + .resume = gspca_resume, +#endif +}; + +/* -- module insert / remove -- */ +static int __init sd_mod_init(void) +{ + if (usb_register(&sd_driver) < 0) + return -1; + PDEBUG(D_PROBE, "registered"); + return 0; +} +static void __exit sd_mod_exit(void) +{ + usb_deregister(&sd_driver); + PDEBUG(D_PROBE, "deregistered"); +} + +module_init(sd_mod_init); +module_exit(sd_mod_exit); -- cgit v0.10.2 From b1043e562ec9e5fe60af85b3a7eea43e77a35994 Mon Sep 17 00:00:00 2001 From: Jean-Francois Moine Date: Mon, 29 Sep 2008 07:03:06 -0300 Subject: V4L/DVB (9089): gspca: Remove the duplicated EOF (ff d9) in t613. Signed-off-by: Jean-Francois Moine Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/gspca/t613.c b/drivers/media/video/gspca/t613.c index 78c6742..7e435a3 100644 --- a/drivers/media/video/gspca/t613.c +++ b/drivers/media/video/gspca/t613.c @@ -916,7 +916,7 @@ static void sd_pkt_scan(struct gspca_dev *gspca_dev, return; } - if (data[len - 1] == 0xff && data[len] == 0xd9) { + if (data[len - 2] == 0xff && data[len - 1] == 0xd9) { /* Just in case, i have seen packets with the marker, * other's do not include it... */ data += 2; -- cgit v0.10.2 From a3a58467db3c90a1e289970ef319c7abb90be617 Mon Sep 17 00:00:00 2001 From: Frank Zago Date: Tue, 30 Sep 2008 03:55:33 -0300 Subject: V4L/DVB (9090): gspca: Restart the state machine when no frame buffer in finepix. Signed-off-by: Frank Zago Signed-off-by: Jean-Francois Moine Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/gspca/finepix.c b/drivers/media/video/gspca/finepix.c index f75db95..65d3cbf 100644 --- a/drivers/media/video/gspca/finepix.c +++ b/drivers/media/video/gspca/finepix.c @@ -135,10 +135,8 @@ static void urb_callback(struct urb *urb) struct gspca_frame *frame; frame = gspca_get_i_frame(&dev->gspca_dev); - if (frame == NULL) { + if (frame == NULL) gspca_dev->last_packet_type = DISCARD_PACKET; - break; - } if (urb->actual_length < FPIX_MAX_TRANSFER || (data[urb->actual_length-2] == 0xff && data[urb->actual_length-1] == 0xd9)) { @@ -149,18 +147,21 @@ static void urb_callback(struct urb *urb) * but there's nothing we can do. We also end * here if the the jpeg ends right at the end * of the frame. */ - gspca_frame_add(gspca_dev, LAST_PACKET, - frame, - data, urb->actual_length); + if (frame) + gspca_frame_add(gspca_dev, LAST_PACKET, + frame, + data, urb->actual_length); dev_new_state(FPIX_REQ_FRAME); schedule_delayed_work(&dev->wqe, NEXT_FRAME_DELAY); } else { /* got a partial image */ - gspca_frame_add(gspca_dev, - gspca_dev->last_packet_type == LAST_PACKET - ? FIRST_PACKET : INTER_PACKET, - frame, + if (frame) + gspca_frame_add(gspca_dev, + gspca_dev->last_packet_type + == LAST_PACKET + ? FIRST_PACKET : INTER_PACKET, + frame, data, urb->actual_length); read_frame_part(dev); } -- cgit v0.10.2 From c109f8168f259ea1f1ab7009c6b99dbe8ea0e2b2 Mon Sep 17 00:00:00 2001 From: Erik Andren Date: Wed, 1 Oct 2008 04:51:53 -0300 Subject: V4L/DVB (9091): gspca: Subdriver m5602 (ALi) added. This patch adds support for the ALi m5602 usb bridge and is based on the gspca framework. It contains code for communicating with 5 different sensors: OmniVision OV9650, Pixel Plus PO1030, Samsung S5K83A, S5K4AA and finally Micron MT9M111. Signed-off-by: Erik Andren Signed-off-by: Jean-Francois Moine [mchehab@redhat.com: fix m5602/Makefile] [mchehab@redhat.com: extern debug caused conflicts. Renamed to m5602_debug] Signed-off-by: Mauro Carvalho Chehab diff --git a/Documentation/video4linux/gspca.txt b/Documentation/video4linux/gspca.txt index 04c612e..004818f 100644 --- a/Documentation/video4linux/gspca.txt +++ b/Documentation/video4linux/gspca.txt @@ -7,6 +7,7 @@ The modules are: xxxx vend:prod ---- spca501 0000:0000 MystFromOri Unknow Camera +m5602 0402:5602 ALi Video Camera Controller spca501 040a:0002 Kodak DVC-325 spca500 040a:0300 Kodak EZ200 zc3xx 041e:041e Creative WebCam Live! diff --git a/Documentation/video4linux/m5602.txt b/Documentation/video4linux/m5602.txt new file mode 100644 index 0000000..4450ab1 --- /dev/null +++ b/Documentation/video4linux/m5602.txt @@ -0,0 +1,12 @@ +This document describes the ALi m5602 bridge connected +to the following supported sensors: +OmniVision OV9650, +Samsung s5k83a, +Samsung s5k4aa, +Micron mt9m111, +Pixel plus PO1030 + +This driver mimics the windows drivers, which have a braindead implementation sending bayer-encoded frames at VGA resolution. +In a perfect world we should be able to reprogram the m5602 and the connected sensor in hardware instead, supporting a range of resolutions and pixelformats + +Anyway, have fun and please report any bugs to m560x-driver-devel@lists.sourceforge.net diff --git a/drivers/media/video/gspca/Kconfig b/drivers/media/video/gspca/Kconfig index 42b9074..fd31099 100644 --- a/drivers/media/video/gspca/Kconfig +++ b/drivers/media/video/gspca/Kconfig @@ -11,3 +11,6 @@ config USB_GSPCA To compile this driver as modules, choose M here: the modules will be called gspca_xxxx. + +source "drivers/media/video/gspca/m5602/Kconfig" + diff --git a/drivers/media/video/gspca/Makefile b/drivers/media/video/gspca/Makefile index 78bad04..488ed97 100644 --- a/drivers/media/video/gspca/Makefile +++ b/drivers/media/video/gspca/Makefile @@ -28,3 +28,6 @@ gspca_t613-objs := t613.o gspca_tv8532-objs := tv8532.o gspca_vc032x-objs := vc032x.o gspca_zc3xx-objs := zc3xx.o + +obj-$(CONFIG_USB_M5602) += m5602/ + diff --git a/drivers/media/video/gspca/m5602/Kconfig b/drivers/media/video/gspca/m5602/Kconfig new file mode 100644 index 0000000..7de33e2 --- /dev/null +++ b/drivers/media/video/gspca/m5602/Kconfig @@ -0,0 +1,11 @@ +config USB_M5602 + tristate "USB ALi m5602 Webcam support" + depends on VIDEO_V4L2 && USB_GSPCA + help + Say Y here if you want support for cameras based on the + ALi m5602 connected to various image sensors. + + See for more info. + + To compile this driver as a module, choose M here: the + module will be called gspca-m5602. diff --git a/drivers/media/video/gspca/m5602/Makefile b/drivers/media/video/gspca/m5602/Makefile new file mode 100644 index 0000000..226ab4f --- /dev/null +++ b/drivers/media/video/gspca/m5602/Makefile @@ -0,0 +1,11 @@ +obj-$(CONFIG_USB_M5602) += gspca_m5602.o + +gspca_m5602-objs := m5602_core.o \ + m5602_ov9650.o \ + m5602_mt9m111.o \ + m5602_po1030.o \ + m5602_s5k83a.o \ + m5602_s5k4aa.o + +EXTRA_CFLAGS += -Idrivers/media/video/gspca + diff --git a/drivers/media/video/gspca/m5602/m5602_bridge.h b/drivers/media/video/gspca/m5602/m5602_bridge.h new file mode 100644 index 0000000..fcbc37b --- /dev/null +++ b/drivers/media/video/gspca/m5602/m5602_bridge.h @@ -0,0 +1,180 @@ +/* + * USB Driver for ALi m5602 based webcams + * + * Copyright (C) 2008 Erik Andren + * Copyright (C) 2007 Ilyes Gouta. Based on the m5603x Linux Driver Project. + * Copyright (C) 2005 m5603x Linux Driver Project + * + * Portions of code to USB interface and ALi driver software, + * Copyright (c) 2006 Willem Duinker + * v4l2 interface modeled after the V4L2 driver + * for SN9C10x PC Camera Controllers + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation, version 2. + * + */ + +#ifndef M5602_BRIDGE_H_ +#define M5602_BRIDGE_H_ + +#include "gspca.h" + +#define MODULE_NAME "ALi m5602" + +/*****************************************************************************/ + +#undef PDEBUG +#undef info +#undef err + +#define err(format, arg...) printk(KERN_ERR KBUILD_MODNAME ": " \ + format "\n" , ## arg) +#define info(format, arg...) printk(KERN_INFO KBUILD_MODNAME ": " \ + format "\n" , ## arg) + +/* Debug parameters */ +#define DBG_INIT 0x1 +#define DBG_PROBE 0x2 +#define DBG_V4L2 0x4 +#define DBG_TRACE 0x8 +#define DBG_DATA 0x10 +#define DBG_V4L2_CID 0x20 +#define DBG_GSPCA 0x40 + +#define PDEBUG(level, fmt, args...) \ + do { \ + if (m5602_debug & level) \ + info("[%s:%d] " fmt, __func__, __LINE__ , \ + ## args); \ + } while (0) + +/*****************************************************************************/ + +#define M5602_XB_SENSOR_TYPE 0x00 +#define M5602_XB_SENSOR_CTRL 0x01 +#define M5602_XB_LINE_OF_FRAME_H 0x02 +#define M5602_XB_LINE_OF_FRAME_L 0x03 +#define M5602_XB_PIX_OF_LINE_H 0x04 +#define M5602_XB_PIX_OF_LINE_L 0x05 +#define M5602_XB_VSYNC_PARA 0x06 +#define M5602_XB_HSYNC_PARA 0x07 +#define M5602_XB_TEST_MODE_1 0x08 +#define M5602_XB_TEST_MODE_2 0x09 +#define M5602_XB_SIG_INI 0x0a +#define M5602_XB_DS_PARA 0x0e +#define M5602_XB_TRIG_PARA 0x0f +#define M5602_XB_CLK_PD 0x10 +#define M5602_XB_MCU_CLK_CTRL 0x12 +#define M5602_XB_MCU_CLK_DIV 0x13 +#define M5602_XB_SEN_CLK_CTRL 0x14 +#define M5602_XB_SEN_CLK_DIV 0x15 +#define M5602_XB_AUD_CLK_CTRL 0x16 +#define M5602_XB_AUD_CLK_DIV 0x17 +#define M5602_XB_DEVCTR1 0x41 +#define M5602_XB_EPSETR0 0x42 +#define M5602_XB_EPAFCTR 0x47 +#define M5602_XB_EPBFCTR 0x49 +#define M5602_XB_EPEFCTR 0x4f +#define M5602_XB_TEST_REG 0x53 +#define M5602_XB_ALT2SIZE 0x54 +#define M5602_XB_ALT3SIZE 0x55 +#define M5602_XB_OBSFRAME 0x56 +#define M5602_XB_PWR_CTL 0x59 +#define M5602_XB_ADC_CTRL 0x60 +#define M5602_XB_ADC_DATA 0x61 +#define M5602_XB_MISC_CTRL 0x62 +#define M5602_XB_SNAPSHOT 0x63 +#define M5602_XB_SCRATCH_1 0x64 +#define M5602_XB_SCRATCH_2 0x65 +#define M5602_XB_SCRATCH_3 0x66 +#define M5602_XB_SCRATCH_4 0x67 +#define M5602_XB_I2C_CTRL 0x68 +#define M5602_XB_I2C_CLK_DIV 0x69 +#define M5602_XB_I2C_DEV_ADDR 0x6a +#define M5602_XB_I2C_REG_ADDR 0x6b +#define M5602_XB_I2C_DATA 0x6c +#define M5602_XB_I2C_STATUS 0x6d +#define M5602_XB_GPIO_DAT_H 0x70 +#define M5602_XB_GPIO_DAT_L 0x71 +#define M5602_XB_GPIO_DIR_H 0x72 +#define M5602_XB_GPIO_DIR_L 0x73 +#define M5602_XB_GPIO_EN_H 0x74 +#define M5602_XB_GPIO_EN_L 0x75 +#define M5602_XB_GPIO_DAT 0x76 +#define M5602_XB_GPIO_DIR 0x77 +#define M5602_XB_MISC_CTL 0x70 + +#define I2C_BUSY 0x80 + +/*****************************************************************************/ + +/* Driver info */ +#define DRIVER_AUTHOR "ALi m5602 Linux Driver Project" +#define DRIVER_DESC "ALi m5602 webcam driver" + +#define M5602_ISOC_ENDPOINT_ADDR 0x81 +#define M5602_INTR_ENDPOINT_ADDR 0x82 + +#define M5602_MAX_FRAMES 32 +#define M5602_URBS 2 +#define M5602_ISOC_PACKETS 14 + +#define M5602_URB_TIMEOUT msecs_to_jiffies(2 * M5602_ISOC_PACKETS) +#define M5602_URB_MSG_TIMEOUT 5000 +#define M5602_FRAME_TIMEOUT 2 + +/*****************************************************************************/ + +/* A skeleton used for sending messages to the m5602 bridge */ +static const unsigned char bridge_urb_skeleton[] = { + 0x13, 0x00, 0x81, 0x00 +}; + +/* A skeleton used for sending messages to the sensor */ +static const unsigned char sensor_urb_skeleton[] = { + 0x23, M5602_XB_GPIO_EN_H, 0x81, 0x06, + 0x23, M5602_XB_MISC_CTRL, 0x81, 0x80, + 0x13, M5602_XB_I2C_DEV_ADDR, 0x81, 0x00, + 0x13, M5602_XB_I2C_REG_ADDR, 0x81, 0x00, + 0x13, M5602_XB_I2C_DATA, 0x81, 0x00, + 0x13, M5602_XB_I2C_CTRL, 0x81, 0x11 +}; + +/* m5602 device descriptor, currently it just wraps the m5602_camera struct */ +struct sd { + struct gspca_dev gspca_dev; + + /* The name of the m5602 camera */ + char *name; + + /* A pointer to the currently connected sensor */ + struct m5602_sensor *sensor; + + /* The current frame's id, used to detect frame boundaries */ + u8 frame_id; + + /* The current frame count */ + u32 frame_count; +}; + +int m5602_read_bridge( + struct sd *sd, u8 address, u8 *i2c_data); + +int m5602_write_bridge( + struct sd *sd, u8 address, u8 i2c_data); + +int m5602_configure(struct gspca_dev *gspca_dev, + const struct usb_device_id *id); + +int m5602_init(struct gspca_dev *gspca_dev); + +void m5602_start_transfer(struct gspca_dev *gspca_dev); + +void m5602_stop_transfer(struct gspca_dev *gspca_dev); + +void m5602_urb_complete(struct gspca_dev *gspca_dev, struct gspca_frame *frame, + __u8 *data, int len); + +#endif diff --git a/drivers/media/video/gspca/m5602/m5602_core.c b/drivers/media/video/gspca/m5602/m5602_core.c new file mode 100644 index 0000000..559495e --- /dev/null +++ b/drivers/media/video/gspca/m5602/m5602_core.c @@ -0,0 +1,321 @@ +/* + * USB Driver for ALi m5602 based webcams + * + * Copyright (C) 2008 Erik Andren + * Copyright (C) 2007 Ilyes Gouta. Based on the m5603x Linux Driver Project. + * Copyright (C) 2005 m5603x Linux Driver Project + * + * Portions of code to USB interface and ALi driver software, + * Copyright (c) 2006 Willem Duinker + * v4l2 interface modeled after the V4L2 driver + * for SN9C10x PC Camera Controllers + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation, version 2. + * + */ + +#include "m5602_ov9650.h" +#include "m5602_mt9m111.h" +#include "m5602_po1030.h" +#include "m5602_s5k83a.h" +#include "m5602_s5k4aa.h" + +/* Kernel module parameters */ +int force_sensor; +int dump_bridge; +int dump_sensor; +unsigned int m5602_debug; + +static const __devinitdata struct usb_device_id m5602_table[] = { + {USB_DEVICE(0x0402, 0x5602)}, + {} +}; + +MODULE_DEVICE_TABLE(usb, m5602_table); + +/* sub-driver description, the ctrl and nctrl is filled at probe time */ +static struct sd_desc sd_desc = { + .name = MODULE_NAME, + .config = m5602_configure, + .init = m5602_init, + .start = m5602_start_transfer, + .stopN = m5602_stop_transfer, + .pkt_scan = m5602_urb_complete +}; + +/* Reads a byte from the m5602 */ +int m5602_read_bridge(struct sd *sd, u8 address, u8 *i2c_data) +{ + int err; + struct usb_device *udev = sd->gspca_dev.dev; + __u8 *buf = sd->gspca_dev.usb_buf; + + err = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), + 0x04, 0xc0, 0x14, + 0x8100 + address, buf, + 1, M5602_URB_MSG_TIMEOUT); + *i2c_data = buf[0]; + + PDEBUG(DBG_TRACE, "Reading bridge register 0x%x containing 0x%x", + address, *i2c_data); + + /* usb_control_msg(...) returns the number of bytes sent upon success, + mask that and return zero upon success instead*/ + return (err < 0) ? err : 0; +} + +/* Writes a byte to to the m5602 */ +int m5602_write_bridge(struct sd *sd, u8 address, u8 i2c_data) +{ + int err; + struct usb_device *udev = sd->gspca_dev.dev; + __u8 *buf = sd->gspca_dev.usb_buf; + + PDEBUG(DBG_TRACE, "Writing bridge register 0x%x with 0x%x", + address, i2c_data); + + memcpy(buf, bridge_urb_skeleton, + sizeof(bridge_urb_skeleton)); + buf[1] = address; + buf[3] = i2c_data; + + err = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), + 0x04, 0x40, 0x19, + 0x0000, buf, + 4, M5602_URB_MSG_TIMEOUT); + + /* usb_control_msg(...) returns the number of bytes sent upon success, + mask that and return zero upon success instead */ + return (err < 0) ? err : 0; +} + +/* Dump all the registers of the m5602 bridge, + unfortunately this breaks the camera until it's power cycled */ +static void m5602_dump_bridge(struct sd *sd) +{ + int i; + for (i = 0; i < 0x80; i++) { + unsigned char val = 0; + m5602_read_bridge(sd, i, &val); + info("ALi m5602 address 0x%x contains 0x%x", i, val); + } + info("Warning: The camera probably won't work until it's power cycled"); +} + +int m5602_probe_sensor(struct sd *sd) +{ + /* Try the po1030 */ + sd->sensor = &po1030; + if (!sd->sensor->probe(sd)) { + sd_desc.ctrls = po1030.ctrls; + sd_desc.nctrls = po1030.nctrls; + return 0; + } + + /* Try the mt9m111 sensor */ + sd->sensor = &mt9m111; + if (!sd->sensor->probe(sd)) { + sd_desc.ctrls = mt9m111.ctrls; + sd_desc.nctrls = mt9m111.nctrls; + return 0; + } + + /* Try the s5k4aa */ + sd->sensor = &s5k4aa; + if (!sd->sensor->probe(sd)) { + sd_desc.ctrls = s5k4aa.ctrls; + sd_desc.nctrls = s5k4aa.nctrls; + return 0; + } + + /* Try the ov9650 */ + sd->sensor = &ov9650; + if (!sd->sensor->probe(sd)) { + sd_desc.ctrls = ov9650.ctrls; + sd_desc.nctrls = ov9650.nctrls; + return 0; + } + + /* Try the s5k83a */ + sd->sensor = &s5k83a; + if (!sd->sensor->probe(sd)) { + sd_desc.ctrls = s5k83a.ctrls; + sd_desc.nctrls = s5k83a.nctrls; + return 0; + } + + + /* More sensor probe function goes here */ + info("Failed to find a sensor"); + sd->sensor = NULL; + return -ENODEV; +} + +int m5602_init(struct gspca_dev *gspca_dev) +{ + struct sd *sd = (struct sd *) gspca_dev; + int err; + + PDEBUG(DBG_TRACE, "Initializing ALi m5602 webcam"); + /* Run the init sequence */ + err = sd->sensor->init(sd); + + return err; +} + +void m5602_start_transfer(struct gspca_dev *gspca_dev) +{ + struct sd *sd = (struct sd *) gspca_dev; + __u8 *buf = sd->gspca_dev.usb_buf; + + /* Send start command to the camera */ + const u8 buffer[4] = {0x13, 0xf9, 0x0f, 0x01}; + memcpy(buf, buffer, sizeof(buffer)); + usb_control_msg(gspca_dev->dev, usb_sndctrlpipe(gspca_dev->dev, 0), + 0x04, 0x40, 0x19, 0x0000, buf, + 4, M5602_URB_MSG_TIMEOUT); + + PDEBUG(DBG_V4L2, "Transfer started"); +} + +void m5602_urb_complete(struct gspca_dev *gspca_dev, struct gspca_frame *frame, + __u8 *data, int len) +{ + struct sd *sd = (struct sd *) gspca_dev; + + if (len < 6) { + PDEBUG(DBG_DATA, "Packet is less than 6 bytes"); + return; + } + + /* Frame delimiter: ff xx xx xx ff ff */ + if (data[0] == 0xff && data[4] == 0xff && data[5] == 0xff && + data[2] != sd->frame_id) { + PDEBUG(DBG_DATA, "Frame delimiter detected"); + sd->frame_id = data[2]; + + /* Remove the extra fluff appended on each header */ + data += 6; + len -= 6; + + /* Complete the last frame (if any) */ + frame = gspca_frame_add(gspca_dev, LAST_PACKET, + frame, data, 0); + + /* Create a new frame */ + gspca_frame_add(gspca_dev, FIRST_PACKET, frame, data, len); + + PDEBUG(DBG_V4L2, "Starting new frame. First urb contained %d", + len); + + } else { + int cur_frame_len = frame->data_end - frame->data; + + /* Remove urb header */ + data += 4; + len -= 4; + + if (cur_frame_len + len <= frame->v4l2_buf.length) { + PDEBUG(DBG_DATA, "Continuing frame copying %d bytes", + len); + + gspca_frame_add(gspca_dev, INTER_PACKET, frame, + data, len); + } else if (frame->v4l2_buf.length - cur_frame_len > 0) { + /* Add the remaining data up to frame size */ + gspca_frame_add(gspca_dev, INTER_PACKET, frame, data, + frame->v4l2_buf.length - cur_frame_len); + } + } +} + +void m5602_stop_transfer(struct gspca_dev *gspca_dev) +{ + /* Is there are a command to stop a data transfer? */ +} + +/* this function is called at probe time */ +int m5602_configure(struct gspca_dev *gspca_dev, + const struct usb_device_id *id) +{ + struct sd *sd = (struct sd *) gspca_dev; + struct cam *cam; + int err; + + PDEBUG(DBG_GSPCA, "m5602_configure start"); + cam = &gspca_dev->cam; + cam->epaddr = M5602_ISOC_ENDPOINT_ADDR; + + if (dump_bridge) + m5602_dump_bridge(sd); + + /* Probe sensor */ + err = m5602_probe_sensor(sd); + if (err) + goto fail; + + PDEBUG(DBG_GSPCA, "m5602_configure end"); + return 0; + +fail: + PDEBUG(DBG_GSPCA, "m5602_configure failed"); + cam->cam_mode = NULL; + cam->nmodes = 0; + + return err; +} + +static int m5602_probe(struct usb_interface *intf, + const struct usb_device_id *id) +{ + return gspca_dev_probe(intf, id, &sd_desc, sizeof(struct sd), + THIS_MODULE); +} + +static struct usb_driver sd_driver = { + .name = MODULE_NAME, + .id_table = m5602_table, + .probe = m5602_probe, +#ifdef CONFIG_PM + .suspend = gspca_suspend, + .resume = gspca_resume, +#endif + .disconnect = gspca_disconnect +}; + +/* -- module insert / remove -- */ +static int __init mod_m5602_init(void) +{ + if (usb_register(&sd_driver) < 0) + return -1; + PDEBUG(D_PROBE, "m5602 module registered"); + return 0; +} +static void __exit mod_m5602_exit(void) +{ + usb_deregister(&sd_driver); + PDEBUG(D_PROBE, "m5602 module deregistered"); +} + +module_init(mod_m5602_init); +module_exit(mod_m5602_exit); + +MODULE_AUTHOR(DRIVER_AUTHOR); +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_LICENSE("GPL"); +module_param_named(debug, m5602_debug, int, S_IRUGO | S_IWUSR); +MODULE_PARM_DESC(debug, "toggles debug on/off"); + +module_param(force_sensor, int, S_IRUGO | S_IWUSR); +MODULE_PARM_DESC(force_sensor, + "force detection of sensor, " + "1 = OV9650, 2 = S5K83A, 3 = S5K4AA, 4 = MT9M111, 5 = PO1030"); + +module_param(dump_bridge, bool, S_IRUGO | S_IWUSR); +MODULE_PARM_DESC(dump_bridge, "Dumps all usb bridge registers at startup"); + +module_param(dump_sensor, bool, S_IRUGO | S_IWUSR); +MODULE_PARM_DESC(dump_sensor, "Dumps all usb sensor registers " + "at startup providing a sensor is found"); diff --git a/drivers/media/video/gspca/m5602/m5602_mt9m111.c b/drivers/media/video/gspca/m5602/m5602_mt9m111.c new file mode 100644 index 0000000..17f04dd --- /dev/null +++ b/drivers/media/video/gspca/m5602/m5602_mt9m111.c @@ -0,0 +1,343 @@ +/* + * Driver for the mt9m111 sensor + * + * Copyright (C) 2008 Erik Andren + * Copyright (C) 2007 Ilyes Gouta. Based on the m5603x Linux Driver Project. + * Copyright (C) 2005 m5603x Linux Driver Project + * + * Portions of code to USB interface and ALi driver software, + * Copyright (c) 2006 Willem Duinker + * v4l2 interface modeled after the V4L2 driver + * for SN9C10x PC Camera Controllers + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation, version 2. + * + */ + +#include "m5602_mt9m111.h" + +int mt9m111_probe(struct sd *sd) +{ + u8 data[2] = {0x00, 0x00}; + int i; + + if (force_sensor) { + if (force_sensor == MT9M111_SENSOR) { + info("Forcing a %s sensor", mt9m111.name); + goto sensor_found; + } + /* If we want to force another sensor, don't try to probe this + * one */ + return -ENODEV; + } + + info("Probing for a mt9m111 sensor"); + + /* Do the preinit */ + for (i = 0; i < ARRAY_SIZE(preinit_mt9m111); i++) { + if (preinit_mt9m111[i][0] == BRIDGE) { + m5602_write_bridge(sd, + preinit_mt9m111[i][1], + preinit_mt9m111[i][2]); + } else { + data[0] = preinit_mt9m111[i][2]; + data[1] = preinit_mt9m111[i][3]; + mt9m111_write_sensor(sd, + preinit_mt9m111[i][1], data, 2); + } + } + + if (mt9m111_read_sensor(sd, MT9M111_SC_CHIPVER, data, 2)) + return -ENODEV; + + if ((data[0] == 0x14) && (data[1] == 0x3a)) { + info("Detected a mt9m111 sensor"); + goto sensor_found; + } + + return -ENODEV; + +sensor_found: + sd->gspca_dev.cam.cam_mode = mt9m111.modes; + sd->gspca_dev.cam.nmodes = mt9m111.nmodes; + return 0; +} + +int mt9m111_init(struct sd *sd) +{ + int i, err; + + /* Init the sensor */ + for (i = 0; i < ARRAY_SIZE(init_mt9m111); i++) { + u8 data[2]; + + if (init_mt9m111[i][0] == BRIDGE) { + err = m5602_write_bridge(sd, + init_mt9m111[i][1], + init_mt9m111[i][2]); + } else { + data[0] = init_mt9m111[i][2]; + data[1] = init_mt9m111[i][3]; + err = mt9m111_write_sensor(sd, + init_mt9m111[i][1], data, 2); + } + } + + if (dump_sensor) + mt9m111_dump_registers(sd); + + return (err < 0) ? err : 0; +} + +int mt9m111_power_down(struct sd *sd) +{ + return 0; +} + +int mt9m111_get_vflip(struct gspca_dev *gspca_dev, __s32 *val) +{ + int err; + u8 data[2] = {0x00, 0x00}; + struct sd *sd = (struct sd *) gspca_dev; + + err = mt9m111_read_sensor(sd, MT9M111_SC_R_MODE_CONTEXT_B, + data, 2); + *val = data[0] & MT9M111_RMB_MIRROR_ROWS; + PDEBUG(DBG_V4L2_CID, "Read vertical flip %d", *val); + + return (err < 0) ? err : 0; +} + +int mt9m111_set_vflip(struct gspca_dev *gspca_dev, __s32 val) +{ + int err; + u8 data[2] = {0x00, 0x00}; + struct sd *sd = (struct sd *) gspca_dev; + + PDEBUG(DBG_V4L2_CID, "Set vertical flip to %d", val); + + /* Set the correct page map */ + err = mt9m111_write_sensor(sd, MT9M111_PAGE_MAP, data, 2); + if (err < 0) + goto out; + + err = mt9m111_read_sensor(sd, MT9M111_SC_R_MODE_CONTEXT_B, data, 2); + if (err < 0) + goto out; + + data[0] = (data[0] & 0xfe) | val; + err = mt9m111_write_sensor(sd, MT9M111_SC_R_MODE_CONTEXT_B, + data, 2); +out: + return (err < 0) ? err : 0; +} + +int mt9m111_get_hflip(struct gspca_dev *gspca_dev, __s32 *val) +{ + int err; + u8 data[2] = {0x00, 0x00}; + struct sd *sd = (struct sd *) gspca_dev; + + err = mt9m111_read_sensor(sd, MT9M111_SC_R_MODE_CONTEXT_B, + data, 2); + *val = data[0] & MT9M111_RMB_MIRROR_COLS; + PDEBUG(DBG_V4L2_CID, "Read horizontal flip %d", *val); + + return (err < 0) ? err : 0; +} + +int mt9m111_set_hflip(struct gspca_dev *gspca_dev, __s32 val) +{ + int err; + u8 data[2] = {0x00, 0x00}; + struct sd *sd = (struct sd *) gspca_dev; + + PDEBUG(DBG_V4L2_CID, "Set horizontal flip to %d", val); + + /* Set the correct page map */ + err = mt9m111_write_sensor(sd, MT9M111_PAGE_MAP, data, 2); + if (err < 0) + goto out; + + err = mt9m111_read_sensor(sd, MT9M111_SC_R_MODE_CONTEXT_B, data, 2); + if (err < 0) + goto out; + + data[0] = (data[0] & 0xfd) | ((val << 1) & 0x02); + err = mt9m111_write_sensor(sd, MT9M111_SC_R_MODE_CONTEXT_B, + data, 2); +out: + return (err < 0) ? err : 0; +} + +int mt9m111_get_gain(struct gspca_dev *gspca_dev, __s32 *val) +{ + int err, tmp; + u8 data[2] = {0x00, 0x00}; + struct sd *sd = (struct sd *) gspca_dev; + + err = mt9m111_read_sensor(sd, MT9M111_SC_GLOBAL_GAIN, data, 2); + tmp = ((data[1] << 8) | data[0]); + + *val = ((tmp & (1 << 10)) * 2) | + ((tmp & (1 << 9)) * 2) | + ((tmp & (1 << 8)) * 2) | + (tmp & 0x7f); + + PDEBUG(DBG_V4L2_CID, "Read gain %d", *val); + + return (err < 0) ? err : 0; +} + +int mt9m111_set_gain(struct gspca_dev *gspca_dev, __s32 val) +{ + int err, tmp; + u8 data[2] = {0x00, 0x00}; + struct sd *sd = (struct sd *) gspca_dev; + + /* Set the correct page map */ + err = mt9m111_write_sensor(sd, MT9M111_PAGE_MAP, data, 2); + if (err < 0) + goto out; + + if (val >= INITIAL_MAX_GAIN * 2 * 2 * 2) + return -EINVAL; + + if ((val >= INITIAL_MAX_GAIN * 2 * 2) && + (val < (INITIAL_MAX_GAIN - 1) * 2 * 2 * 2)) + tmp = (1 << 10) | (val << 9) | + (val << 8) | (val / 8); + else if ((val >= INITIAL_MAX_GAIN * 2) && + (val < INITIAL_MAX_GAIN * 2 * 2)) + tmp = (1 << 9) | (1 << 8) | (val / 4); + else if ((val >= INITIAL_MAX_GAIN) && + (val < INITIAL_MAX_GAIN * 2)) + tmp = (1 << 8) | (val / 2); + else + tmp = val; + + data[1] = (tmp & 0xff00) >> 8; + data[0] = (tmp & 0xff); + PDEBUG(DBG_V4L2_CID, "tmp=%d, data[1]=%d, data[0]=%d", tmp, + data[1], data[0]); + + err = mt9m111_write_sensor(sd, MT9M111_SC_GLOBAL_GAIN, + data, 2); +out: + return (err < 0) ? err : 0; +} + +int mt9m111_read_sensor(struct sd *sd, const u8 address, + u8 *i2c_data, const u8 len) { + int err, i; + + do { + err = m5602_read_bridge(sd, M5602_XB_I2C_STATUS, i2c_data); + } while ((*i2c_data & I2C_BUSY) && !err); + if (err < 0) + goto out; + + err = m5602_write_bridge(sd, M5602_XB_I2C_DEV_ADDR, + sd->sensor->i2c_slave_id); + if (err < 0) + goto out; + + err = m5602_write_bridge(sd, M5602_XB_I2C_REG_ADDR, address); + if (err < 0) + goto out; + + err = m5602_write_bridge(sd, M5602_XB_I2C_CTRL, 0x1a); + if (err < 0) + goto out; + + for (i = 0; i < len && !err; i++) { + err = m5602_read_bridge(sd, M5602_XB_I2C_DATA, &(i2c_data[i])); + + PDEBUG(DBG_TRACE, "Reading sensor register " + "0x%x contains 0x%x ", address, *i2c_data); + } +out: + return (err < 0) ? err : 0; +} + +int mt9m111_write_sensor(struct sd *sd, const u8 address, + u8 *i2c_data, const u8 len) +{ + int err, i; + u8 *p; + struct usb_device *udev = sd->gspca_dev.dev; + __u8 *buf = sd->gspca_dev.usb_buf; + + /* No sensor with a data width larger + than 16 bits has yet been seen, nor with 0 :p*/ + if (len > 2 || !len) + return -EINVAL; + + memcpy(buf, sensor_urb_skeleton, + sizeof(sensor_urb_skeleton)); + + buf[11] = sd->sensor->i2c_slave_id; + buf[15] = address; + + p = buf + 16; + + /* Copy a four byte write sequence for each byte to be written to */ + for (i = 0; i < len; i++) { + memcpy(p, sensor_urb_skeleton + 16, 4); + p[3] = i2c_data[i]; + p += 4; + PDEBUG(DBG_TRACE, "Writing sensor register 0x%x with 0x%x", + address, i2c_data[i]); + } + + /* Copy the tailer */ + memcpy(p, sensor_urb_skeleton + 20, 4); + + /* Set the total length */ + p[3] = 0x10 + len; + + err = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), + 0x04, 0x40, 0x19, + 0x0000, buf, + 20 + len * 4, M5602_URB_MSG_TIMEOUT); + + return (err < 0) ? err : 0; +} + +void mt9m111_dump_registers(struct sd *sd) +{ + u8 address, value[2] = {0x00, 0x00}; + + info("Dumping the mt9m111 register state"); + + info("Dumping the mt9m111 sensor core registers"); + value[1] = MT9M111_SENSOR_CORE; + mt9m111_write_sensor(sd, MT9M111_PAGE_MAP, value, 2); + for (address = 0; address < 0xff; address++) { + mt9m111_read_sensor(sd, address, value, 2); + info("register 0x%x contains 0x%x%x", + address, value[0], value[1]); + } + + info("Dumping the mt9m111 color pipeline registers"); + value[1] = MT9M111_COLORPIPE; + mt9m111_write_sensor(sd, MT9M111_PAGE_MAP, value, 2); + for (address = 0; address < 0xff; address++) { + mt9m111_read_sensor(sd, address, value, 2); + info("register 0x%x contains 0x%x%x", + address, value[0], value[1]); + } + + info("Dumping the mt9m111 camera control registers"); + value[1] = MT9M111_CAMERA_CONTROL; + mt9m111_write_sensor(sd, MT9M111_PAGE_MAP, value, 2); + for (address = 0; address < 0xff; address++) { + mt9m111_read_sensor(sd, address, value, 2); + info("register 0x%x contains 0x%x%x", + address, value[0], value[1]); + } + + info("mt9m111 register state dump complete"); +} diff --git a/drivers/media/video/gspca/m5602/m5602_mt9m111.h b/drivers/media/video/gspca/m5602/m5602_mt9m111.h new file mode 100644 index 0000000..79a5d88 --- /dev/null +++ b/drivers/media/video/gspca/m5602/m5602_mt9m111.h @@ -0,0 +1,1020 @@ +/* + * Driver for the mt9m111 sensor + * + * Copyright (C) 2008 Erik Andren + * Copyright (C) 2007 Ilyes Gouta. Based on the m5603x Linux Driver Project. + * Copyright (C) 2005 m5603x Linux Driver Project + * + * Portions of code to USB interface and ALi driver software, + * Copyright (c) 2006 Willem Duinker + * v4l2 interface modeled after the V4L2 driver + * for SN9C10x PC Camera Controllers + * + * Some defines taken from the mt9m111 sensor driver + * Copyright (C) 2008, Robert Jarzmik + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation, version 2. + * + */ + +#ifndef M5602_MT9M111_H_ +#define M5602_MT9M111_H_ + +#include "m5602_sensor.h" + +/*****************************************************************************/ + +#define MT9M111_SC_CHIPVER 0x00 +#define MT9M111_SC_ROWSTART 0x01 +#define MT9M111_SC_COLSTART 0x02 +#define MT9M111_SC_WINDOW_HEIGHT 0x03 +#define MT9M111_SC_WINDOW_WIDTH 0x04 +#define MT9M111_SC_HBLANK_CONTEXT_B 0x05 +#define MT9M111_SC_VBLANK_CONTEXT_B 0x06 +#define MT9M111_SC_HBLANK_CONTEXT_A 0x07 +#define MT9M111_SC_VBLANK_CONTEXT_A 0x08 +#define MT9M111_SC_SHUTTER_WIDTH 0x09 +#define MT9M111_SC_ROW_SPEED 0x0a + +#define MT9M111_SC_EXTRA_DELAY 0x0b +#define MT9M111_SC_SHUTTER_DELAY 0x0c +#define MT9M111_SC_RESET 0x0d +#define MT9M111_SC_R_MODE_CONTEXT_B 0x20 +#define MT9M111_SC_R_MODE_CONTEXT_A 0x21 +#define MT9M111_SC_FLASH_CONTROL 0x23 +#define MT9M111_SC_GREEN_1_GAIN 0x2b +#define MT9M111_SC_BLUE_GAIN 0x2c +#define MT9M111_SC_RED_GAIN 0x2d +#define MT9M111_SC_GREEN_2_GAIN 0x2e +#define MT9M111_SC_GLOBAL_GAIN 0x2f + +#define MT9M111_RMB_MIRROR_ROWS (1 << 0) +#define MT9M111_RMB_MIRROR_COLS (1 << 1) + +#define MT9M111_CONTEXT_CONTROL 0xc8 +#define MT9M111_PAGE_MAP 0xf0 +#define MT9M111_BYTEWISE_ADDRESS 0xf1 + +#define MT9M111_CP_OPERATING_MODE_CTL 0x06 +#define MT9M111_CP_LUMA_OFFSET 0x34 +#define MT9M111_CP_LUMA_CLIP 0x35 +#define MT9M111_CP_OUTPUT_FORMAT_CTL2_CONTEXT_A 0x3a +#define MT9M111_CP_LENS_CORRECTION_1 0x3b +#define MT9M111_CP_DEFECT_CORR_CONTEXT_A 0x4c +#define MT9M111_CP_DEFECT_CORR_CONTEXT_B 0x4d +#define MT9M111_CP_OUTPUT_FORMAT_CTL2_CONTEXT_B 0x9b +#define MT9M111_CP_GLOBAL_CLK_CONTROL 0xb3 + +#define MT9M111_CC_AUTO_EXPOSURE_PARAMETER_18 0x65 +#define MT9M111_CC_AWB_PARAMETER_7 0x28 + +#define MT9M111_SENSOR_CORE 0x00 +#define MT9M111_COLORPIPE 0x01 +#define MT9M111_CAMERA_CONTROL 0x02 + +#define INITIAL_MAX_GAIN 64 +#define DEFAULT_GAIN 283 + +/*****************************************************************************/ + +/* Kernel module parameters */ +extern int force_sensor; +extern int dump_sensor; +extern unsigned int m5602_debug; + +int mt9m111_probe(struct sd *sd); +int mt9m111_init(struct sd *sd); +int mt9m111_power_down(struct sd *sd); + +int mt9m111_read_sensor(struct sd *sd, const u8 address, + u8 *i2c_data, const u8 len); + +int mt9m111_write_sensor(struct sd *sd, const u8 address, + u8 *i2c_data, const u8 len); + +void mt9m111_dump_registers(struct sd *sd); + +int mt9m111_set_vflip(struct gspca_dev *gspca_dev, __s32 val); +int mt9m111_get_vflip(struct gspca_dev *gspca_dev, __s32 *val); +int mt9m111_get_hflip(struct gspca_dev *gspca_dev, __s32 *val); +int mt9m111_set_hflip(struct gspca_dev *gspca_dev, __s32 val); +int mt9m111_get_gain(struct gspca_dev *gspca_dev, __s32 *val); +int mt9m111_set_gain(struct gspca_dev *gspca_dev, __s32 val); + +static struct m5602_sensor mt9m111 = { + .name = "MT9M111", + + .i2c_slave_id = 0xba, + + .probe = mt9m111_probe, + .init = mt9m111_init, + .power_down = mt9m111_power_down, + + .read_sensor = mt9m111_read_sensor, + .write_sensor = mt9m111_write_sensor, + + .nctrls = 3, + .ctrls = { + { + { + .id = V4L2_CID_VFLIP, + .type = V4L2_CTRL_TYPE_BOOLEAN, + .name = "vertical flip", + .minimum = 0, + .maximum = 1, + .step = 1, + .default_value = 0 + }, + .set = mt9m111_set_vflip, + .get = mt9m111_get_vflip + }, { + { + .id = V4L2_CID_HFLIP, + .type = V4L2_CTRL_TYPE_BOOLEAN, + .name = "horizontal flip", + .minimum = 0, + .maximum = 1, + .step = 1, + .default_value = 0 + }, + .set = mt9m111_set_hflip, + .get = mt9m111_get_hflip + }, { + { + .id = V4L2_CID_GAIN, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "gain", + .minimum = 0, + .maximum = (INITIAL_MAX_GAIN - 1) * 2 * 2 * 2, + .step = 1, + .default_value = DEFAULT_GAIN, + .flags = V4L2_CTRL_FLAG_SLIDER + }, + .set = mt9m111_set_hflip, + .get = mt9m111_get_hflip + } + }, + + .nmodes = 1, + .modes = { + { + M5602_DEFAULT_FRAME_WIDTH, + M5602_DEFAULT_FRAME_HEIGHT, + V4L2_PIX_FMT_SBGGR8, + V4L2_FIELD_NONE, + .sizeimage = + M5602_DEFAULT_FRAME_WIDTH * M5602_DEFAULT_FRAME_HEIGHT, + .bytesperline = M5602_DEFAULT_FRAME_WIDTH, + .colorspace = V4L2_COLORSPACE_SRGB, + .priv = 1 + } + } +}; + +static const unsigned char preinit_mt9m111[][4] = +{ + {BRIDGE, M5602_XB_MCU_CLK_DIV, 0x02, 0x00}, + {BRIDGE, M5602_XB_MCU_CLK_CTRL, 0xb0, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_DIV, 0x00, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0, 0x00}, + {BRIDGE, M5602_XB_SENSOR_TYPE, 0x0d, 0x00}, + {BRIDGE, M5602_XB_SENSOR_CTRL, 0x00, 0x00}, + {BRIDGE, M5602_XB_ADC_CTRL, 0xc0, 0x00}, + {BRIDGE, M5602_XB_SENSOR_TYPE, 0x09, 0x00}, + + {SENSOR, MT9M111_PAGE_MAP, 0x00, 0x00}, + {SENSOR, MT9M111_SC_RESET, 0xff, 0xf7}, + + {BRIDGE, M5602_XB_GPIO_DIR, 0x05, 0x00}, + {BRIDGE, M5602_XB_GPIO_DAT, 0x04, 0x00}, + {BRIDGE, M5602_XB_GPIO_EN_H, 0x3e, 0x00}, + {BRIDGE, M5602_XB_GPIO_DIR_H, 0x3e, 0x00}, + {BRIDGE, M5602_XB_GPIO_DAT_H, 0x02, 0x00}, + {BRIDGE, M5602_XB_GPIO_EN_L, 0xff, 0x00}, + {BRIDGE, M5602_XB_GPIO_DIR_L, 0xff, 0x00}, + {BRIDGE, M5602_XB_GPIO_DAT_L, 0x00, 0x00}, + + {BRIDGE, M5602_XB_SEN_CLK_DIV, 0x00, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0, 0x00}, + {BRIDGE, M5602_XB_GPIO_DIR, 0x07, 0x00}, + {BRIDGE, M5602_XB_GPIO_DAT, 0x0b, 0x00}, + {BRIDGE, M5602_XB_GPIO_EN_H, 0x06, 0x00}, + {BRIDGE, M5602_XB_GPIO_EN_L, 0x00, 0x00}, + + {BRIDGE, M5602_XB_I2C_CLK_DIV, 0x0a, 0x00} +}; + +static const unsigned char init_mt9m111[][4] = +{ + {BRIDGE, M5602_XB_MCU_CLK_DIV, 0x02, 0x00}, + {BRIDGE, M5602_XB_MCU_CLK_CTRL, 0xb0, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_DIV, 0x00, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0, 0x00}, + {BRIDGE, M5602_XB_ADC_CTRL, 0xc0, 0x00}, + {BRIDGE, M5602_XB_SENSOR_TYPE, 0x0d, 0x00}, + {BRIDGE, M5602_XB_SENSOR_CTRL, 0x00, 0x00}, + {BRIDGE, M5602_XB_ADC_CTRL, 0xc0, 0x00}, + {BRIDGE, M5602_XB_SENSOR_TYPE, 0x09, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_DIV, 0x00, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0, 0x00}, + + {SENSOR, MT9M111_PAGE_MAP, 0x00, 0x00}, + {SENSOR, MT9M111_SC_RESET, 0xff, 0xff}, + {SENSOR, MT9M111_SC_RESET, 0xff, 0xff}, + {SENSOR, MT9M111_SC_RESET, 0xff, 0xde}, + {SENSOR, MT9M111_SC_RESET, 0xff, 0xff}, + {SENSOR, MT9M111_SC_RESET, 0xff, 0xf7}, + {SENSOR, MT9M111_PAGE_MAP, 0x00, 0x01}, + + {BRIDGE, M5602_XB_I2C_REG_ADDR, 0xb3, 0x00}, + + {SENSOR, MT9M111_CP_GLOBAL_CLK_CONTROL, 0xff, 0xff}, + + {BRIDGE, M5602_XB_GPIO_DIR, 0x05, 0x00}, + {BRIDGE, M5602_XB_GPIO_DAT, 0x04, 0x00}, + {BRIDGE, M5602_XB_GPIO_EN_H, 0x3e, 0x00}, + {BRIDGE, M5602_XB_GPIO_DIR_H, 0x3e, 0x00}, + {BRIDGE, M5602_XB_GPIO_DAT_H, 0x02, 0x00}, + {BRIDGE, M5602_XB_GPIO_EN_L, 0xff, 0x00}, + {BRIDGE, M5602_XB_GPIO_DIR_L, 0xff, 0x00}, + {BRIDGE, M5602_XB_GPIO_DAT_L, 0x00, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_DIV, 0x04, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_DIV, 0x00, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0, 0x00}, + {BRIDGE, M5602_XB_ADC_CTRL, 0xc0, 0x00}, + {BRIDGE, M5602_XB_SENSOR_TYPE, 0x09, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_DIV, 0x00, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0, 0x00}, + {BRIDGE, M5602_XB_GPIO_DIR, 0x07, 0x00}, + {BRIDGE, M5602_XB_GPIO_DAT, 0x0b, 0x00}, + {BRIDGE, M5602_XB_GPIO_EN_H, 0x06, 0x00}, + {BRIDGE, M5602_XB_GPIO_EN_L, 0x00, 0x00}, + {BRIDGE, M5602_XB_I2C_CLK_DIV, 0x0a, 0x00}, + + {SENSOR, MT9M111_PAGE_MAP, 0x00, 0x00}, + {SENSOR, MT9M111_SC_RESET, 0x00, 0x05}, + {SENSOR, MT9M111_PAGE_MAP, 0x00, 0x00}, + {SENSOR, MT9M111_SC_RESET, 0x00, 0x29}, + {SENSOR, MT9M111_PAGE_MAP, 0x00, 0x00}, + {SENSOR, MT9M111_SC_RESET, 0x00, 0x08}, + {SENSOR, MT9M111_PAGE_MAP, 0x00, 0x01}, + {SENSOR, MT9M111_CP_OPERATING_MODE_CTL, 0x00, 0x10}, + {SENSOR, MT9M111_CP_LENS_CORRECTION_1, 0x04, 0x2a}, + {SENSOR, MT9M111_CP_DEFECT_CORR_CONTEXT_A, 0x00, 0x01}, + {SENSOR, MT9M111_CP_DEFECT_CORR_CONTEXT_B, 0x00, 0x01}, + {SENSOR, MT9M111_CP_LUMA_OFFSET, 0x00, 0x00}, + {SENSOR, MT9M111_CP_LUMA_CLIP, 0xff, 0x00}, + {SENSOR, MT9M111_CP_OUTPUT_FORMAT_CTL2_CONTEXT_A, 0x14, 0x00}, + {SENSOR, MT9M111_CP_OUTPUT_FORMAT_CTL2_CONTEXT_B, 0x14, 0x00}, + {BRIDGE, M5602_XB_I2C_REG_ADDR, 0xcd, 0x00}, + + {SENSOR, 0xcd, 0x00, 0x0e}, + {BRIDGE, M5602_XB_I2C_REG_ADDR, 0xd0, 0x00}, + {SENSOR, 0xd0, 0x00, 0x40}, + {SENSOR, MT9M111_PAGE_MAP, 0x00, 0x02}, + {SENSOR, MT9M111_CC_AUTO_EXPOSURE_PARAMETER_18, 0x00, 0x00}, + {BRIDGE, M5602_XB_I2C_REG_ADDR, 0x28, 0x00}, + {SENSOR, MT9M111_CC_AWB_PARAMETER_7, 0xef, 0x07}, + {BRIDGE, M5602_XB_I2C_REG_ADDR, 0x28, 0x00}, + {SENSOR, MT9M111_CC_AWB_PARAMETER_7, 0xef, 0x03}, + {SENSOR, MT9M111_PAGE_MAP, 0x00, 0x00}, + {BRIDGE, M5602_XB_I2C_REG_ADDR, 0x33, 0x00}, + {SENSOR, 0x33, 0x03, 0x49}, + {BRIDGE, M5602_XB_I2C_REG_ADDR, 0x33, 0x00}, + + {SENSOR, 0x33, 0x03, 0x49}, + {SENSOR, 0x34, 0xc0, 0x19}, + {SENSOR, 0x3f, 0x20, 0x20}, + {SENSOR, 0x40, 0x20, 0x20}, + {SENSOR, 0x5a, 0xc0, 0x0a}, + {SENSOR, 0x70, 0x7b, 0x0a}, + {SENSOR, 0x71, 0xff, 0x00}, + {SENSOR, 0x72, 0x19, 0x0e}, + {SENSOR, 0x73, 0x18, 0x0f}, + {SENSOR, 0x74, 0x57, 0x32}, + {SENSOR, 0x75, 0x56, 0x34}, + {SENSOR, 0x76, 0x73, 0x35}, + {SENSOR, 0x77, 0x30, 0x12}, + {SENSOR, 0x78, 0x79, 0x02}, + {SENSOR, 0x79, 0x75, 0x06}, + {SENSOR, 0x7a, 0x77, 0x0a}, + {SENSOR, 0x7b, 0x78, 0x09}, + {SENSOR, 0x7c, 0x7d, 0x06}, + {SENSOR, 0x7d, 0x31, 0x10}, + {SENSOR, 0x7e, 0x00, 0x7e}, + {SENSOR, 0x80, 0x59, 0x04}, + {SENSOR, 0x81, 0x59, 0x04}, + {SENSOR, 0x82, 0x57, 0x0a}, + {SENSOR, 0x83, 0x58, 0x0b}, + {SENSOR, 0x84, 0x47, 0x0c}, + {SENSOR, 0x85, 0x48, 0x0e}, + {SENSOR, 0x86, 0x5b, 0x02}, + {SENSOR, 0x87, 0x00, 0x5c}, + {SENSOR, MT9M111_CONTEXT_CONTROL, 0x00, 0x08}, + {SENSOR, 0x60, 0x00, 0x80}, + {SENSOR, 0x61, 0x00, 0x00}, + {SENSOR, 0x62, 0x00, 0x00}, + {SENSOR, 0x63, 0x00, 0x00}, + {SENSOR, 0x64, 0x00, 0x00}, + + {SENSOR, MT9M111_SC_ROWSTART, 0x00, 0x0d}, + {SENSOR, MT9M111_SC_COLSTART, 0x00, 0x18}, + {SENSOR, MT9M111_SC_WINDOW_HEIGHT, 0x04, 0x04}, + {SENSOR, MT9M111_SC_WINDOW_WIDTH, 0x05, 0x08}, + {SENSOR, MT9M111_SC_HBLANK_CONTEXT_B, 0x01, 0x38}, + {SENSOR, MT9M111_SC_VBLANK_CONTEXT_B, 0x00, 0x11}, + {SENSOR, MT9M111_SC_HBLANK_CONTEXT_A, 0x01, 0x38}, + {SENSOR, MT9M111_SC_VBLANK_CONTEXT_A, 0x00, 0x11}, + {SENSOR, MT9M111_SC_R_MODE_CONTEXT_B, 0x01, 0x03}, + {SENSOR, MT9M111_SC_R_MODE_CONTEXT_A, 0x01, 0x03}, + {SENSOR, 0x30, 0x04, 0x00}, + + {BRIDGE, M5602_XB_SEN_CLK_DIV, 0x06, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0, 0x00}, + {BRIDGE, M5602_XB_ADC_CTRL, 0xc0, 0x00}, + {BRIDGE, M5602_XB_SENSOR_TYPE, 0x09, 0x00}, + {BRIDGE, M5602_XB_LINE_OF_FRAME_H, 0x81, 0x00}, + {BRIDGE, M5602_XB_PIX_OF_LINE_H, 0x82, 0x00}, + {BRIDGE, M5602_XB_SIG_INI, 0x01, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x04, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x04, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00}, + {BRIDGE, M5602_XB_SIG_INI, 0x00, 0x00}, + {BRIDGE, M5602_XB_SIG_INI, 0x02, 0x00}, + {BRIDGE, M5602_XB_HSYNC_PARA, 0x00, 0x00}, + {BRIDGE, M5602_XB_HSYNC_PARA, 0x00, 0x00}, + {BRIDGE, M5602_XB_HSYNC_PARA, 0x05, 0x00}, + {BRIDGE, M5602_XB_HSYNC_PARA, 0x07, 0x00}, + {BRIDGE, M5602_XB_SIG_INI, 0x00, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_DIV, 0x00, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xa0, 0x00}, + {SENSOR, MT9M111_PAGE_MAP, 0x00, 0x00}, + {SENSOR, MT9M111_SC_SHUTTER_WIDTH, 0x01, 0xf4}, + {SENSOR, MT9M111_SC_GLOBAL_GAIN, 0x00, 0xea}, + + {BRIDGE, M5602_XB_SEN_CLK_DIV, 0x06, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0, 0x00}, + {BRIDGE, M5602_XB_ADC_CTRL, 0xc0, 0x00}, + {BRIDGE, M5602_XB_SENSOR_TYPE, 0x09, 0x00}, + {BRIDGE, M5602_XB_LINE_OF_FRAME_H, 0x81, 0x00}, + {BRIDGE, M5602_XB_PIX_OF_LINE_H, 0x82, 0x00}, + {BRIDGE, M5602_XB_SIG_INI, 0x01, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x04, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x04, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00}, + {BRIDGE, M5602_XB_SIG_INI, 0x00, 0x00}, + {BRIDGE, M5602_XB_SIG_INI, 0x02, 0x00}, + {BRIDGE, M5602_XB_HSYNC_PARA, 0x00, 0x00}, + {BRIDGE, M5602_XB_HSYNC_PARA, 0x00, 0x00}, + {BRIDGE, M5602_XB_HSYNC_PARA, 0x05, 0x00}, + {BRIDGE, M5602_XB_HSYNC_PARA, 0x07, 0x00}, + {BRIDGE, M5602_XB_SIG_INI, 0x00, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_DIV, 0x00, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0, 0x00}, + + {SENSOR, MT9M111_PAGE_MAP, 0x00, 0x00}, + {SENSOR, MT9M111_SC_RESET, 0x00, 0x09}, + {SENSOR, MT9M111_SC_RESET, 0x00, 0x29}, + {SENSOR, MT9M111_SC_RESET, 0x00, 0x08}, + {SENSOR, MT9M111_SC_RESET, 0x00, 0x0c}, + {SENSOR, MT9M111_SC_RESET, 0x00, 0x04}, + {SENSOR, MT9M111_PAGE_MAP, 0x00, 0x01}, + {BRIDGE, M5602_XB_I2C_REG_ADDR, 0xb3, 0x00}, + {SENSOR, MT9M111_CP_GLOBAL_CLK_CONTROL, 0x00, 0x03}, + {BRIDGE, M5602_XB_GPIO_DIR, 0x05, 0x00}, + {BRIDGE, M5602_XB_GPIO_DAT, 0x04, 0x00}, + {BRIDGE, M5602_XB_GPIO_EN_H, 0x3e, 0x00}, + {BRIDGE, M5602_XB_GPIO_DIR_H, 0x3e, 0x00}, + {BRIDGE, M5602_XB_GPIO_DAT_H, 0x02, 0x00}, + {BRIDGE, M5602_XB_GPIO_EN_L, 0xff, 0x00}, + {BRIDGE, M5602_XB_GPIO_DIR_L, 0xff, 0x00}, + {BRIDGE, M5602_XB_GPIO_DAT_L, 0x00, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_DIV, 0x04, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_DIV, 0x00, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0, 0x00}, + {BRIDGE, M5602_XB_ADC_CTRL, 0xc0, 0x00}, + {BRIDGE, M5602_XB_SENSOR_TYPE, 0x09, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_DIV, 0x00, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0, 0x00}, + {BRIDGE, M5602_XB_GPIO_DIR, 0x07, 0x00}, + {BRIDGE, M5602_XB_GPIO_DAT, 0x0b, 0x00}, + {BRIDGE, M5602_XB_GPIO_EN_H, 0x06, 0x00}, + {BRIDGE, M5602_XB_GPIO_EN_L, 0x00, 0x00}, + {BRIDGE, M5602_XB_I2C_CLK_DIV, 0x0a, 0x00}, + + {SENSOR, MT9M111_PAGE_MAP, 0x00, 0x00}, + {SENSOR, MT9M111_SC_RESET, 0x00, 0x05}, + {SENSOR, MT9M111_PAGE_MAP, 0x00, 0x00}, + {SENSOR, MT9M111_SC_RESET, 0x00, 0x29}, + {SENSOR, MT9M111_PAGE_MAP, 0x00, 0x00}, + {SENSOR, MT9M111_SC_RESET, 0x00, 0x08}, + {SENSOR, MT9M111_PAGE_MAP, 0x00, 0x01}, + {SENSOR, MT9M111_CP_OPERATING_MODE_CTL, 0x00, 0x10}, + {SENSOR, MT9M111_CP_LENS_CORRECTION_1, 0x04, 0x2a}, + {SENSOR, MT9M111_CP_DEFECT_CORR_CONTEXT_A, 0x00, 0x01}, + {SENSOR, MT9M111_CP_DEFECT_CORR_CONTEXT_B, 0x00, 0x01}, + {SENSOR, MT9M111_CP_LUMA_OFFSET, 0x00, 0x00}, + {SENSOR, MT9M111_CP_LUMA_CLIP, 0xff, 0x00}, + {SENSOR, MT9M111_CP_OUTPUT_FORMAT_CTL2_CONTEXT_A, 0x14, 0x00}, + {SENSOR, MT9M111_CP_OUTPUT_FORMAT_CTL2_CONTEXT_B, 0x14, 0x00}, + + {BRIDGE, M5602_XB_I2C_REG_ADDR, 0xcd, 0x00}, + {SENSOR, 0xcd, 0x00, 0x0e}, + {BRIDGE, M5602_XB_I2C_REG_ADDR, 0xd0, 0x00}, + {SENSOR, 0xd0, 0x00, 0x40}, + {SENSOR, MT9M111_PAGE_MAP, 0x00, 0x02}, + {SENSOR, MT9M111_CC_AUTO_EXPOSURE_PARAMETER_18, 0x00, 0x00}, + {BRIDGE, M5602_XB_I2C_REG_ADDR, 0x28, 0x00}, + {SENSOR, MT9M111_CC_AWB_PARAMETER_7, 0xef, 0x07}, + {BRIDGE, M5602_XB_I2C_REG_ADDR, 0x28, 0x00}, + {SENSOR, MT9M111_CC_AWB_PARAMETER_7, 0xef, 0x03}, + {SENSOR, MT9M111_PAGE_MAP, 0x00, 0x00}, + {BRIDGE, M5602_XB_I2C_REG_ADDR, 0x33, 0x00}, + {SENSOR, 0x33, 0x03, 0x49}, + {BRIDGE, M5602_XB_I2C_REG_ADDR, 0x33, 0x00}, + + {SENSOR, 0x33, 0x03, 0x49}, + {SENSOR, 0x34, 0xc0, 0x19}, + {SENSOR, 0x3f, 0x20, 0x20}, + {SENSOR, 0x40, 0x20, 0x20}, + {SENSOR, 0x5a, 0xc0, 0x0a}, + {SENSOR, 0x70, 0x7b, 0x0a}, + {SENSOR, 0x71, 0xff, 0x00}, + {SENSOR, 0x72, 0x19, 0x0e}, + {SENSOR, 0x73, 0x18, 0x0f}, + {SENSOR, 0x74, 0x57, 0x32}, + {SENSOR, 0x75, 0x56, 0x34}, + {SENSOR, 0x76, 0x73, 0x35}, + {SENSOR, 0x77, 0x30, 0x12}, + {SENSOR, 0x78, 0x79, 0x02}, + {SENSOR, 0x79, 0x75, 0x06}, + {SENSOR, 0x7a, 0x77, 0x0a}, + {SENSOR, 0x7b, 0x78, 0x09}, + {SENSOR, 0x7c, 0x7d, 0x06}, + {SENSOR, 0x7d, 0x31, 0x10}, + {SENSOR, 0x7e, 0x00, 0x7e}, + {SENSOR, 0x80, 0x59, 0x04}, + {SENSOR, 0x81, 0x59, 0x04}, + {SENSOR, 0x82, 0x57, 0x0a}, + {SENSOR, 0x83, 0x58, 0x0b}, + {SENSOR, 0x84, 0x47, 0x0c}, + {SENSOR, 0x85, 0x48, 0x0e}, + {SENSOR, 0x86, 0x5b, 0x02}, + {SENSOR, 0x87, 0x00, 0x5c}, + {SENSOR, MT9M111_CONTEXT_CONTROL, 0x00, 0x08}, + {SENSOR, 0x60, 0x00, 0x80}, + {SENSOR, 0x61, 0x00, 0x00}, + {SENSOR, 0x62, 0x00, 0x00}, + {SENSOR, 0x63, 0x00, 0x00}, + {SENSOR, 0x64, 0x00, 0x00}, + + {SENSOR, MT9M111_SC_ROWSTART, 0x00, 0x0d}, + {SENSOR, MT9M111_SC_COLSTART, 0x00, 0x18}, + {SENSOR, MT9M111_SC_WINDOW_HEIGHT, 0x04, 0x04}, + {SENSOR, MT9M111_SC_WINDOW_WIDTH, 0x05, 0x08}, + {SENSOR, MT9M111_SC_HBLANK_CONTEXT_B, 0x01, 0x38}, + {SENSOR, MT9M111_SC_VBLANK_CONTEXT_B, 0x00, 0x11}, + {SENSOR, MT9M111_SC_HBLANK_CONTEXT_A, 0x01, 0x38}, + {SENSOR, MT9M111_SC_VBLANK_CONTEXT_A, 0x00, 0x11}, + {SENSOR, MT9M111_SC_R_MODE_CONTEXT_B, 0x01, 0x03}, + {SENSOR, MT9M111_SC_R_MODE_CONTEXT_A, 0x01, 0x03}, + {SENSOR, 0x30, 0x04, 0x00}, + + {BRIDGE, M5602_XB_SEN_CLK_DIV, 0x06, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0, 0x00}, + {BRIDGE, M5602_XB_ADC_CTRL, 0xc0, 0x00}, + {BRIDGE, M5602_XB_SENSOR_TYPE, 0x09, 0x00}, + {BRIDGE, M5602_XB_LINE_OF_FRAME_H, 0x81, 0x00}, + {BRIDGE, M5602_XB_PIX_OF_LINE_H, 0x82, 0x00}, + {BRIDGE, M5602_XB_SIG_INI, 0x01, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x04, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x04, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00}, + {BRIDGE, M5602_XB_SIG_INI, 0x00, 0x00}, + {BRIDGE, M5602_XB_SIG_INI, 0x02, 0x00}, + {BRIDGE, M5602_XB_HSYNC_PARA, 0x00, 0x00}, + {BRIDGE, M5602_XB_HSYNC_PARA, 0x00, 0x00}, + {BRIDGE, M5602_XB_HSYNC_PARA, 0x05, 0x00}, + {BRIDGE, M5602_XB_HSYNC_PARA, 0x07, 0x00}, + {BRIDGE, M5602_XB_SIG_INI, 0x00, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_DIV, 0x00, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xa0, 0x00}, + {SENSOR, MT9M111_PAGE_MAP, 0x00, 0x00}, + {SENSOR, MT9M111_SC_SHUTTER_WIDTH, 0x01, 0xf4}, + {SENSOR, MT9M111_SC_GLOBAL_GAIN, 0x00, 0xea}, + {BRIDGE, M5602_XB_SEN_CLK_DIV, 0x00, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0, 0x00}, + + {SENSOR, MT9M111_PAGE_MAP, 0x00, 0x00}, + {SENSOR, MT9M111_SC_RESET, 0x00, 0x09}, + {SENSOR, MT9M111_SC_RESET, 0x00, 0x29}, + {SENSOR, MT9M111_SC_RESET, 0x00, 0x08}, + {SENSOR, MT9M111_SC_RESET, 0x00, 0x0c}, + {SENSOR, MT9M111_SC_RESET, 0x00, 0x04}, + {SENSOR, MT9M111_PAGE_MAP, 0x00, 0x01}, + + {BRIDGE, M5602_XB_I2C_REG_ADDR, 0xb3, 0x00}, + {SENSOR, MT9M111_CP_GLOBAL_CLK_CONTROL, 0x00, 0x03}, + {BRIDGE, M5602_XB_GPIO_DIR, 0x05, 0x00}, + {BRIDGE, M5602_XB_GPIO_DAT, 0x04, 0x00}, + {BRIDGE, M5602_XB_GPIO_EN_H, 0x3e, 0x00}, + {BRIDGE, M5602_XB_GPIO_DIR_H, 0x3e, 0x00}, + {BRIDGE, M5602_XB_GPIO_DAT_H, 0x02, 0x00}, + {BRIDGE, M5602_XB_GPIO_EN_L, 0xff, 0x00}, + {BRIDGE, M5602_XB_GPIO_DIR_L, 0xff, 0x00}, + {BRIDGE, M5602_XB_GPIO_DAT_L, 0x00, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_DIV, 0x04, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_DIV, 0x00, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0, 0x00}, + {BRIDGE, M5602_XB_ADC_CTRL, 0xc0, 0x00}, + {BRIDGE, M5602_XB_SENSOR_TYPE, 0x09, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_DIV, 0x00, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0, 0x00}, + {BRIDGE, M5602_XB_GPIO_DIR, 0x07, 0x00}, + {BRIDGE, M5602_XB_GPIO_DAT, 0x0b, 0x00}, + {BRIDGE, M5602_XB_GPIO_EN_H, 0x06, 0x00}, + {BRIDGE, M5602_XB_GPIO_EN_L, 0x00, 0x00}, + {BRIDGE, M5602_XB_I2C_CLK_DIV, 0x0a, 0x00}, + + {SENSOR, MT9M111_PAGE_MAP, 0x00, 0x00}, + {SENSOR, MT9M111_SC_RESET, 0x00, 0x05}, + {SENSOR, MT9M111_PAGE_MAP, 0x00, 0x00}, + {SENSOR, MT9M111_SC_RESET, 0x00, 0x29}, + {SENSOR, MT9M111_PAGE_MAP, 0x00, 0x00}, + {SENSOR, MT9M111_SC_RESET, 0x00, 0x08}, + {SENSOR, MT9M111_PAGE_MAP, 0x00, 0x01}, + {SENSOR, MT9M111_CP_OPERATING_MODE_CTL, 0x00, 0x10}, + {SENSOR, MT9M111_CP_LENS_CORRECTION_1, 0x04, 0x2a}, + {SENSOR, MT9M111_CP_DEFECT_CORR_CONTEXT_A, 0x00, 0x01}, + {SENSOR, MT9M111_CP_DEFECT_CORR_CONTEXT_B, 0x00, 0x01}, + {SENSOR, MT9M111_CP_LUMA_OFFSET, 0x00, 0x00}, + {SENSOR, MT9M111_CP_LUMA_CLIP, 0xff, 0x00}, + {SENSOR, MT9M111_CP_OUTPUT_FORMAT_CTL2_CONTEXT_A, 0x14, 0x00}, + {SENSOR, MT9M111_CP_OUTPUT_FORMAT_CTL2_CONTEXT_B, 0x14, 0x00}, + + {BRIDGE, M5602_XB_I2C_REG_ADDR, 0xcd, 0x00}, + {SENSOR, 0xcd, 0x00, 0x0e}, + {BRIDGE, M5602_XB_I2C_REG_ADDR, 0xd0, 0x00}, + {SENSOR, 0xd0, 0x00, 0x40}, + {SENSOR, MT9M111_PAGE_MAP, 0x00, 0x02}, + {SENSOR, MT9M111_CC_AUTO_EXPOSURE_PARAMETER_18, 0x00, 0x00}, + {BRIDGE, M5602_XB_I2C_REG_ADDR, 0x28, 0x00}, + {SENSOR, MT9M111_CC_AWB_PARAMETER_7, 0xef, 0x07}, + {BRIDGE, M5602_XB_I2C_REG_ADDR, 0x28, 0x00}, + {SENSOR, MT9M111_CC_AWB_PARAMETER_7, 0xef, 0x03}, + {SENSOR, MT9M111_PAGE_MAP, 0x00, 0x00}, + {BRIDGE, M5602_XB_I2C_REG_ADDR, 0x33, 0x00}, + {SENSOR, 0x33, 0x03, 0x49}, + {BRIDGE, M5602_XB_I2C_REG_ADDR, 0x33, 0x00}, + + {SENSOR, 0x33, 0x03, 0x49}, + {SENSOR, 0x34, 0xc0, 0x19}, + {SENSOR, 0x3f, 0x20, 0x20}, + {SENSOR, 0x40, 0x20, 0x20}, + {SENSOR, 0x5a, 0xc0, 0x0a}, + {SENSOR, 0x70, 0x7b, 0x0a}, + {SENSOR, 0x71, 0xff, 0x00}, + {SENSOR, 0x72, 0x19, 0x0e}, + {SENSOR, 0x73, 0x18, 0x0f}, + {SENSOR, 0x74, 0x57, 0x32}, + {SENSOR, 0x75, 0x56, 0x34}, + {SENSOR, 0x76, 0x73, 0x35}, + {SENSOR, 0x77, 0x30, 0x12}, + {SENSOR, 0x78, 0x79, 0x02}, + {SENSOR, 0x79, 0x75, 0x06}, + {SENSOR, 0x7a, 0x77, 0x0a}, + {SENSOR, 0x7b, 0x78, 0x09}, + {SENSOR, 0x7c, 0x7d, 0x06}, + {SENSOR, 0x7d, 0x31, 0x10}, + {SENSOR, 0x7e, 0x00, 0x7e}, + {SENSOR, 0x80, 0x59, 0x04}, + {SENSOR, 0x81, 0x59, 0x04}, + {SENSOR, 0x82, 0x57, 0x0a}, + {SENSOR, 0x83, 0x58, 0x0b}, + {SENSOR, 0x84, 0x47, 0x0c}, + {SENSOR, 0x85, 0x48, 0x0e}, + {SENSOR, 0x86, 0x5b, 0x02}, + {SENSOR, 0x87, 0x00, 0x5c}, + {SENSOR, MT9M111_CONTEXT_CONTROL, 0x00, 0x08}, + {SENSOR, 0x60, 0x00, 0x80}, + {SENSOR, 0x61, 0x00, 0x00}, + {SENSOR, 0x62, 0x00, 0x00}, + {SENSOR, 0x63, 0x00, 0x00}, + {SENSOR, 0x64, 0x00, 0x00}, + + {SENSOR, MT9M111_SC_ROWSTART, 0x00, 0x0d}, + {SENSOR, MT9M111_SC_COLSTART, 0x00, 0x18}, + {SENSOR, MT9M111_SC_WINDOW_HEIGHT, 0x04, 0x04}, + {SENSOR, MT9M111_SC_WINDOW_WIDTH, 0x05, 0x08}, + {SENSOR, MT9M111_SC_HBLANK_CONTEXT_B, 0x01, 0x38}, + {SENSOR, MT9M111_SC_VBLANK_CONTEXT_B, 0x00, 0x11}, + {SENSOR, MT9M111_SC_HBLANK_CONTEXT_A, 0x01, 0x38}, + {SENSOR, MT9M111_SC_VBLANK_CONTEXT_A, 0x00, 0x11}, + {SENSOR, MT9M111_SC_R_MODE_CONTEXT_B, 0x01, 0x03}, + {SENSOR, MT9M111_SC_R_MODE_CONTEXT_A, 0x01, 0x03}, + {SENSOR, 0x30, 0x04, 0x00}, + + {BRIDGE, M5602_XB_SEN_CLK_DIV, 0x06, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0, 0x00}, + {BRIDGE, M5602_XB_ADC_CTRL, 0xc0, 0x00}, + {BRIDGE, M5602_XB_SENSOR_TYPE, 0x09, 0x00}, + {BRIDGE, M5602_XB_LINE_OF_FRAME_H, 0x81, 0x00}, + {BRIDGE, M5602_XB_PIX_OF_LINE_H, 0x82, 0x00}, + {BRIDGE, M5602_XB_SIG_INI, 0x01, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x04, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x04, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00}, + {BRIDGE, M5602_XB_HSYNC_PARA, 0x00, 0x00}, + {BRIDGE, M5602_XB_HSYNC_PARA, 0x00, 0x00}, + {BRIDGE, M5602_XB_HSYNC_PARA, 0x05, 0x00}, + {BRIDGE, M5602_XB_HSYNC_PARA, 0x07, 0x00}, + {BRIDGE, M5602_XB_SIG_INI, 0x00, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_DIV, 0x00, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xa0, 0x00}, + {SENSOR, MT9M111_PAGE_MAP, 0x00, 0x00}, + {SENSOR, MT9M111_SC_SHUTTER_WIDTH, 0x01, 0xf4}, + {SENSOR, MT9M111_SC_GLOBAL_GAIN, 0x00, 0xea}, + {BRIDGE, M5602_XB_SEN_CLK_DIV, 0x00, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0, 0x00}, + {SENSOR, MT9M111_PAGE_MAP, 0x00, 0x00}, + {BRIDGE, M5602_XB_I2C_DEV_ADDR, 0xba, 0x00}, + {BRIDGE, M5602_XB_I2C_REG_ADDR, 0x0d, 0x00}, + {BRIDGE, M5602_XB_I2C_CTRL, 0x1a, 0x00}, + {SENSOR, MT9M111_SC_RESET, 0x00, 0x09}, + {BRIDGE, M5602_XB_I2C_DEV_ADDR, 0xba, 0x00}, + {BRIDGE, M5602_XB_I2C_REG_ADDR, 0x0d, 0x00}, + {BRIDGE, M5602_XB_I2C_CTRL, 0x1a, 0x00}, + {SENSOR, MT9M111_SC_RESET, 0x00, 0x29}, + {BRIDGE, M5602_XB_I2C_DEV_ADDR, 0xba, 0x00}, + {BRIDGE, M5602_XB_I2C_REG_ADDR, 0x0d, 0x00}, + {BRIDGE, M5602_XB_I2C_CTRL, 0x1a, 0x00}, + {SENSOR, MT9M111_SC_RESET, 0x00, 0x08}, + {BRIDGE, M5602_XB_I2C_DEV_ADDR, 0xba, 0x00}, + {BRIDGE, M5602_XB_I2C_REG_ADDR, 0x0d, 0x00}, + {BRIDGE, M5602_XB_I2C_CTRL, 0x1a, 0x00}, + {SENSOR, MT9M111_SC_RESET, 0x00, 0x0c}, + {BRIDGE, M5602_XB_I2C_DEV_ADDR, 0xba, 0x00}, + {BRIDGE, M5602_XB_I2C_REG_ADDR, 0x0d, 0x00}, + {BRIDGE, M5602_XB_I2C_CTRL, 0x1a, 0x00}, + {SENSOR, MT9M111_SC_RESET, 0x00, 0x04}, + {SENSOR, MT9M111_PAGE_MAP, 0x00, 0x01}, + {BRIDGE, M5602_XB_I2C_DEV_ADDR, 0xba, 0x00}, + {BRIDGE, M5602_XB_I2C_REG_ADDR, 0xb3, 0x00}, + {BRIDGE, M5602_XB_I2C_CTRL, 0x1a, 0x00}, + {SENSOR, MT9M111_CP_GLOBAL_CLK_CONTROL, 0x00, 0x03}, + {BRIDGE, M5602_XB_GPIO_DIR, 0x05, 0x00}, + {BRIDGE, M5602_XB_GPIO_DAT, 0x04, 0x00}, + {BRIDGE, M5602_XB_GPIO_EN_H, 0x3e, 0x00}, + {BRIDGE, M5602_XB_GPIO_DIR_H, 0x3e, 0x00}, + {BRIDGE, M5602_XB_GPIO_DAT_H, 0x02, 0x00}, + {BRIDGE, M5602_XB_GPIO_EN_L, 0xff, 0x00}, + {BRIDGE, M5602_XB_GPIO_DIR_L, 0xff, 0x00}, + {BRIDGE, M5602_XB_GPIO_DAT_L, 0x00, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_DIV, 0x04, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_DIV, 0x00, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0, 0x00}, + {BRIDGE, M5602_XB_ADC_CTRL, 0xc0, 0x00}, + {BRIDGE, M5602_XB_SENSOR_TYPE, 0x09, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_DIV, 0x00, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0, 0x00}, + {BRIDGE, M5602_XB_GPIO_DIR, 0x07, 0x00}, + {BRIDGE, M5602_XB_GPIO_DAT, 0x0b, 0x00}, + {BRIDGE, M5602_XB_GPIO_EN_H, 0x06, 0x00}, + {BRIDGE, M5602_XB_GPIO_EN_L, 0x00, 0x00}, + {BRIDGE, M5602_XB_I2C_CLK_DIV, 0x0a, 0x00}, + {SENSOR, MT9M111_PAGE_MAP, 0x00, 0x00}, + {BRIDGE, M5602_XB_I2C_DEV_ADDR, 0xba, 0x00}, + {BRIDGE, M5602_XB_I2C_REG_ADDR, 0x0d, 0x00}, + {BRIDGE, M5602_XB_I2C_CTRL, 0x1a, 0x00}, + {SENSOR, MT9M111_SC_RESET, 0x00, 0x05}, + {SENSOR, MT9M111_PAGE_MAP, 0x00, 0x00}, + {BRIDGE, M5602_XB_I2C_DEV_ADDR, 0xba, 0x00}, + {BRIDGE, M5602_XB_I2C_REG_ADDR, 0x0d, 0x00}, + {BRIDGE, M5602_XB_I2C_CTRL, 0x1a, 0x00}, + {SENSOR, MT9M111_SC_RESET, 0x00, 0x29}, + {SENSOR, MT9M111_PAGE_MAP, 0x00, 0x00}, + {BRIDGE, M5602_XB_I2C_DEV_ADDR, 0xba, 0x00}, + {BRIDGE, M5602_XB_I2C_REG_ADDR, 0x0d, 0x00}, + {BRIDGE, M5602_XB_I2C_CTRL, 0x1a, 0x00}, + + {SENSOR, MT9M111_SC_RESET, 0x00, 0x08}, + {SENSOR, MT9M111_PAGE_MAP, 0x00, 0x01}, + {SENSOR, MT9M111_CP_OPERATING_MODE_CTL, 0x00, 0x10}, + {SENSOR, MT9M111_CP_LENS_CORRECTION_1, 0x04, 0x2a}, + {SENSOR, MT9M111_CP_DEFECT_CORR_CONTEXT_A, 0x00, 0x01}, + {SENSOR, MT9M111_CP_DEFECT_CORR_CONTEXT_B, 0x00, 0x01}, + {SENSOR, MT9M111_CP_LUMA_OFFSET, 0x00, 0x00}, + {SENSOR, MT9M111_CP_LUMA_CLIP, 0xff, 0x00}, + {SENSOR, MT9M111_CP_OUTPUT_FORMAT_CTL2_CONTEXT_A, 0x14, 0x00}, + {SENSOR, MT9M111_CP_OUTPUT_FORMAT_CTL2_CONTEXT_B, 0x14, 0x00}, + + {BRIDGE, M5602_XB_I2C_DEV_ADDR, 0xba, 0x00}, + {BRIDGE, M5602_XB_I2C_REG_ADDR, 0xcd, 0x00}, + {BRIDGE, M5602_XB_I2C_CTRL, 0x1a, 0x00}, + {SENSOR, 0xcd, 0x00, 0x0e}, + {BRIDGE, M5602_XB_I2C_DEV_ADDR, 0xba, 0x00}, + {BRIDGE, M5602_XB_I2C_REG_ADDR, 0xd0, 0x00}, + {BRIDGE, M5602_XB_I2C_CTRL, 0x1a, 0x00}, + {SENSOR, 0xd0, 0x00, 0x40}, + {SENSOR, MT9M111_PAGE_MAP, 0x00, 0x02}, + {SENSOR, MT9M111_CC_AUTO_EXPOSURE_PARAMETER_18, 0x00, 0x00}, + {BRIDGE, M5602_XB_I2C_DEV_ADDR, 0xba, 0x00}, + {BRIDGE, M5602_XB_I2C_REG_ADDR, 0x28, 0x00}, + {BRIDGE, M5602_XB_I2C_CTRL, 0x1a, 0x00}, + {SENSOR, MT9M111_CC_AWB_PARAMETER_7, 0xef, 0x07}, + {BRIDGE, M5602_XB_I2C_DEV_ADDR, 0xba, 0x00}, + {BRIDGE, M5602_XB_I2C_REG_ADDR, 0x28, 0x00}, + {BRIDGE, M5602_XB_I2C_CTRL, 0x1a, 0x00}, + {SENSOR, MT9M111_CC_AWB_PARAMETER_7, 0xef, 0x03}, + {SENSOR, MT9M111_PAGE_MAP, 0x00, 0x00}, + {BRIDGE, M5602_XB_I2C_DEV_ADDR, 0xba, 0x00}, + {BRIDGE, M5602_XB_I2C_REG_ADDR, 0x33, 0x00}, + {BRIDGE, M5602_XB_I2C_CTRL, 0x1a, 0x00}, + {SENSOR, 0x33, 0x03, 0x49}, + {BRIDGE, M5602_XB_I2C_DEV_ADDR, 0xba, 0x00}, + {BRIDGE, M5602_XB_I2C_REG_ADDR, 0x33, 0x00}, + {BRIDGE, M5602_XB_I2C_CTRL, 0x1a, 0x00}, + + {SENSOR, 0x33, 0x03, 0x49}, + {SENSOR, 0x34, 0xc0, 0x19}, + {SENSOR, 0x3f, 0x20, 0x20}, + {SENSOR, 0x40, 0x20, 0x20}, + {SENSOR, 0x5a, 0xc0, 0x0a}, + {SENSOR, 0x70, 0x7b, 0x0a}, + {SENSOR, 0x71, 0xff, 0x00}, + {SENSOR, 0x72, 0x19, 0x0e}, + {SENSOR, 0x73, 0x18, 0x0f}, + {SENSOR, 0x74, 0x57, 0x32}, + {SENSOR, 0x75, 0x56, 0x34}, + {SENSOR, 0x76, 0x73, 0x35}, + {SENSOR, 0x77, 0x30, 0x12}, + {SENSOR, 0x78, 0x79, 0x02}, + {SENSOR, 0x79, 0x75, 0x06}, + {SENSOR, 0x7a, 0x77, 0x0a}, + {SENSOR, 0x7b, 0x78, 0x09}, + {SENSOR, 0x7c, 0x7d, 0x06}, + {SENSOR, 0x7d, 0x31, 0x10}, + {SENSOR, 0x7e, 0x00, 0x7e}, + {SENSOR, 0x80, 0x59, 0x04}, + {SENSOR, 0x81, 0x59, 0x04}, + {SENSOR, 0x82, 0x57, 0x0a}, + {SENSOR, 0x83, 0x58, 0x0b}, + {SENSOR, 0x84, 0x47, 0x0c}, + {SENSOR, 0x85, 0x48, 0x0e}, + {SENSOR, 0x86, 0x5b, 0x02}, + {SENSOR, 0x87, 0x00, 0x5c}, + {SENSOR, MT9M111_CONTEXT_CONTROL, 0x00, 0x08}, + {SENSOR, 0x60, 0x00, 0x80}, + {SENSOR, 0x61, 0x00, 0x00}, + {SENSOR, 0x62, 0x00, 0x00}, + {SENSOR, 0x63, 0x00, 0x00}, + {SENSOR, 0x64, 0x00, 0x00}, + {SENSOR, MT9M111_SC_ROWSTART, 0x00, 0x0d}, + {SENSOR, MT9M111_SC_COLSTART, 0x00, 0x12}, + {SENSOR, MT9M111_SC_WINDOW_HEIGHT, 0x04, 0x00}, + {SENSOR, MT9M111_SC_WINDOW_WIDTH, 0x05, 0x10}, + {SENSOR, MT9M111_SC_HBLANK_CONTEXT_B, 0x01, 0x60}, + {SENSOR, MT9M111_SC_VBLANK_CONTEXT_B, 0x00, 0x11}, + {SENSOR, MT9M111_SC_HBLANK_CONTEXT_A, 0x01, 0x60}, + {SENSOR, MT9M111_SC_VBLANK_CONTEXT_A, 0x00, 0x11}, + {SENSOR, MT9M111_SC_R_MODE_CONTEXT_B, 0x01, 0x0f}, + {SENSOR, MT9M111_SC_R_MODE_CONTEXT_A, 0x01, 0x0f}, + {SENSOR, 0x30, 0x04, 0x00}, + + {BRIDGE, M5602_XB_SEN_CLK_DIV, 0x06, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0, 0x00}, + {BRIDGE, M5602_XB_ADC_CTRL, 0xc0, 0x00}, + {BRIDGE, M5602_XB_SENSOR_TYPE, 0x09, 0x00}, + {BRIDGE, M5602_XB_LINE_OF_FRAME_H, 0x81, 0x00}, + {BRIDGE, M5602_XB_PIX_OF_LINE_H, 0x82, 0x00}, + {BRIDGE, M5602_XB_SIG_INI, 0x01, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x01, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0xe3, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00}, + {BRIDGE, M5602_XB_SIG_INI, 0x00, 0x00}, + {BRIDGE, M5602_XB_SIG_INI, 0x02, 0x00}, + {BRIDGE, M5602_XB_HSYNC_PARA, 0x00, 0x00}, + {BRIDGE, M5602_XB_HSYNC_PARA, 0x00, 0x00}, + {BRIDGE, M5602_XB_HSYNC_PARA, 0x02, 0x00}, + {BRIDGE, M5602_XB_HSYNC_PARA, 0x87, 0x00}, + {BRIDGE, M5602_XB_SIG_INI, 0x00, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_DIV, 0x00, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0, 0x00}, + + {SENSOR, MT9M111_PAGE_MAP, 0x00, 0x00}, + {SENSOR, MT9M111_SC_SHUTTER_WIDTH, 0x01, 0x90}, + {SENSOR, MT9M111_SC_GLOBAL_GAIN, 0x00, 0xe6}, + {BRIDGE, M5602_XB_SEN_CLK_DIV, 0x00, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0, 0x00}, + {SENSOR, MT9M111_PAGE_MAP, 0x00, 0x00}, + {BRIDGE, M5602_XB_I2C_DEV_ADDR, 0xba, 0x00}, + {BRIDGE, M5602_XB_I2C_REG_ADDR, 0x0d, 0x00}, + {BRIDGE, M5602_XB_I2C_CTRL, 0x1a, 0x00}, + {SENSOR, MT9M111_SC_RESET, 0x00, 0x09}, + {BRIDGE, M5602_XB_I2C_DEV_ADDR, 0xba, 0x00}, + {BRIDGE, M5602_XB_I2C_REG_ADDR, 0x0d, 0x00}, + {BRIDGE, M5602_XB_I2C_CTRL, 0x1a, 0x00}, + {SENSOR, MT9M111_SC_RESET, 0x00, 0x29}, + {BRIDGE, M5602_XB_I2C_DEV_ADDR, 0xba, 0x00}, + {BRIDGE, M5602_XB_I2C_REG_ADDR, 0x0d, 0x00}, + {BRIDGE, M5602_XB_I2C_CTRL, 0x1a, 0x00}, + {SENSOR, MT9M111_SC_RESET, 0x00, 0x08}, + {BRIDGE, M5602_XB_I2C_DEV_ADDR, 0xba, 0x00}, + {BRIDGE, M5602_XB_I2C_REG_ADDR, 0x0d, 0x00}, + {BRIDGE, M5602_XB_I2C_CTRL, 0x1a, 0x00}, + {SENSOR, MT9M111_SC_RESET, 0x00, 0x0c}, + {BRIDGE, M5602_XB_I2C_DEV_ADDR, 0xba, 0x00}, + {BRIDGE, M5602_XB_I2C_REG_ADDR, 0x0d, 0x00}, + {BRIDGE, M5602_XB_I2C_CTRL, 0x1a, 0x00}, + {SENSOR, MT9M111_SC_RESET, 0x00, 0x04}, + {SENSOR, MT9M111_PAGE_MAP, 0x00, 0x01}, + {BRIDGE, M5602_XB_I2C_DEV_ADDR, 0xba, 0x00}, + {BRIDGE, M5602_XB_I2C_REG_ADDR, 0xb3, 0x00}, + {BRIDGE, M5602_XB_I2C_CTRL, 0x1a, 0x00}, + {SENSOR, MT9M111_CP_GLOBAL_CLK_CONTROL, 0x00, 0x03}, + + {BRIDGE, M5602_XB_GPIO_DIR, 0x05, 0x00}, + {BRIDGE, M5602_XB_GPIO_DAT, 0x04, 0x00}, + {BRIDGE, M5602_XB_GPIO_EN_H, 0x3e, 0x00}, + {BRIDGE, M5602_XB_GPIO_DIR_H, 0x3e, 0x00}, + {BRIDGE, M5602_XB_GPIO_DAT_H, 0x02, 0x00}, + {BRIDGE, M5602_XB_GPIO_EN_L, 0xff, 0x00}, + {BRIDGE, M5602_XB_GPIO_DIR_L, 0xff, 0x00}, + {BRIDGE, M5602_XB_GPIO_DAT_L, 0x00, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_DIV, 0x04, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_DIV, 0x00, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0, 0x00}, + {BRIDGE, M5602_XB_ADC_CTRL, 0xc0, 0x00}, + {BRIDGE, M5602_XB_SENSOR_TYPE, 0x09, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_DIV, 0x00, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0, 0x00}, + {BRIDGE, M5602_XB_GPIO_DIR, 0x07, 0x00}, + {BRIDGE, M5602_XB_GPIO_DAT, 0x0b, 0x00}, + {BRIDGE, M5602_XB_GPIO_EN_H, 0x06, 0x00}, + {BRIDGE, M5602_XB_GPIO_EN_L, 0x00, 0x00}, + {BRIDGE, M5602_XB_I2C_CLK_DIV, 0x0a, 0x00}, + {SENSOR, MT9M111_PAGE_MAP, 0x00, 0x00}, + {BRIDGE, M5602_XB_I2C_DEV_ADDR, 0xba, 0x00}, + {BRIDGE, M5602_XB_I2C_REG_ADDR, 0x0d, 0x00}, + {BRIDGE, M5602_XB_I2C_CTRL, 0x1a, 0x00}, + {SENSOR, MT9M111_SC_RESET, 0x00, 0x05}, + {SENSOR, MT9M111_PAGE_MAP, 0x00, 0x00}, + {BRIDGE, M5602_XB_I2C_DEV_ADDR, 0xba, 0x00}, + {BRIDGE, M5602_XB_I2C_REG_ADDR, 0x0d, 0x00}, + {BRIDGE, M5602_XB_I2C_CTRL, 0x1a, 0x00}, + {SENSOR, MT9M111_SC_RESET, 0x00, 0x29}, + {SENSOR, MT9M111_PAGE_MAP, 0x00, 0x00}, + {BRIDGE, M5602_XB_I2C_DEV_ADDR, 0xba, 0x00}, + {BRIDGE, M5602_XB_I2C_REG_ADDR, 0x0d, 0x00}, + {BRIDGE, M5602_XB_I2C_CTRL, 0x1a, 0x00}, + {SENSOR, MT9M111_SC_RESET, 0x00, 0x08}, + {SENSOR, MT9M111_PAGE_MAP, 0x00, 0x01}, + {SENSOR, MT9M111_CP_OPERATING_MODE_CTL, 0x00, 0x10}, + {SENSOR, MT9M111_CP_LENS_CORRECTION_1, 0x04, 0x2a}, + {SENSOR, MT9M111_CP_DEFECT_CORR_CONTEXT_A, 0x00, 0x01}, + {SENSOR, MT9M111_CP_DEFECT_CORR_CONTEXT_B, 0x00, 0x01}, + {SENSOR, MT9M111_CP_LUMA_OFFSET, 0x00, 0x00}, + {SENSOR, MT9M111_CP_LUMA_CLIP, 0xff, 0x00}, + {SENSOR, MT9M111_CP_OUTPUT_FORMAT_CTL2_CONTEXT_A, 0x14, 0x00}, + {SENSOR, MT9M111_CP_OUTPUT_FORMAT_CTL2_CONTEXT_B, 0x14, 0x00}, + + {BRIDGE, M5602_XB_I2C_DEV_ADDR, 0xba, 0x00}, + {BRIDGE, M5602_XB_I2C_REG_ADDR, 0xcd, 0x00}, + {BRIDGE, M5602_XB_I2C_CTRL, 0x1a, 0x00}, + {SENSOR, 0xcd, 0x00, 0x0e}, + {BRIDGE, M5602_XB_I2C_DEV_ADDR, 0xba, 0x00}, + {BRIDGE, M5602_XB_I2C_REG_ADDR, 0xd0, 0x00}, + {BRIDGE, M5602_XB_I2C_CTRL, 0x1a, 0x00}, + {SENSOR, 0xd0, 0x00, 0x40}, + {SENSOR, MT9M111_PAGE_MAP, 0x00, 0x02}, + {SENSOR, MT9M111_CC_AUTO_EXPOSURE_PARAMETER_18, 0x00, 0x00}, + {BRIDGE, M5602_XB_I2C_DEV_ADDR, 0xba, 0x00}, + {BRIDGE, M5602_XB_I2C_REG_ADDR, 0x28, 0x00}, + {BRIDGE, M5602_XB_I2C_CTRL, 0x1a, 0x00}, + {SENSOR, MT9M111_CC_AWB_PARAMETER_7, 0xef, 0x07}, + {BRIDGE, M5602_XB_I2C_DEV_ADDR, 0xba, 0x00}, + {BRIDGE, M5602_XB_I2C_REG_ADDR, 0x28, 0x00}, + {BRIDGE, M5602_XB_I2C_CTRL, 0x1a, 0x00}, + {SENSOR, MT9M111_CC_AWB_PARAMETER_7, 0xef, 0x03}, + {SENSOR, MT9M111_PAGE_MAP, 0x00, 0x00}, + + {BRIDGE, M5602_XB_I2C_DEV_ADDR, 0xba, 0x00}, + {BRIDGE, M5602_XB_I2C_REG_ADDR, 0x33, 0x00}, + {BRIDGE, M5602_XB_I2C_CTRL, 0x1a, 0x00}, + {SENSOR, 0x33, 0x03, 0x49}, + {BRIDGE, M5602_XB_I2C_DEV_ADDR, 0xba, 0x00}, + {BRIDGE, M5602_XB_I2C_REG_ADDR, 0x33, 0x00}, + {BRIDGE, M5602_XB_I2C_CTRL, 0x1a, 0x00}, + + {SENSOR, 0x33, 0x03, 0x49}, + {SENSOR, 0x34, 0xc0, 0x19}, + {SENSOR, 0x3f, 0x20, 0x20}, + {SENSOR, 0x40, 0x20, 0x20}, + {SENSOR, 0x5a, 0xc0, 0x0a}, + {SENSOR, 0x70, 0x7b, 0x0a}, + {SENSOR, 0x71, 0xff, 0x00}, + {SENSOR, 0x72, 0x19, 0x0e}, + {SENSOR, 0x73, 0x18, 0x0f}, + {SENSOR, 0x74, 0x57, 0x32}, + {SENSOR, 0x75, 0x56, 0x34}, + {SENSOR, 0x76, 0x73, 0x35}, + {SENSOR, 0x77, 0x30, 0x12}, + {SENSOR, 0x78, 0x79, 0x02}, + {SENSOR, 0x79, 0x75, 0x06}, + {SENSOR, 0x7a, 0x77, 0x0a}, + {SENSOR, 0x7b, 0x78, 0x09}, + {SENSOR, 0x7c, 0x7d, 0x06}, + {SENSOR, 0x7d, 0x31, 0x10}, + {SENSOR, 0x7e, 0x00, 0x7e}, + {SENSOR, 0x80, 0x59, 0x04}, + {SENSOR, 0x81, 0x59, 0x04}, + {SENSOR, 0x82, 0x57, 0x0a}, + {SENSOR, 0x83, 0x58, 0x0b}, + {SENSOR, 0x84, 0x47, 0x0c}, + {SENSOR, 0x85, 0x48, 0x0e}, + {SENSOR, 0x86, 0x5b, 0x02}, + {SENSOR, 0x87, 0x00, 0x5c}, + {SENSOR, MT9M111_CONTEXT_CONTROL, 0x00, 0x08}, + {SENSOR, 0x60, 0x00, 0x80}, + {SENSOR, 0x61, 0x00, 0x00}, + {SENSOR, 0x62, 0x00, 0x00}, + {SENSOR, 0x63, 0x00, 0x00}, + {SENSOR, 0x64, 0x00, 0x00}, + + {SENSOR, MT9M111_SC_ROWSTART, 0x00, 0x0d}, + {SENSOR, MT9M111_SC_COLSTART, 0x00, 0x12}, + {SENSOR, MT9M111_SC_WINDOW_HEIGHT, 0x04, 0x00}, + {SENSOR, MT9M111_SC_WINDOW_WIDTH, 0x05, 0x10}, + {SENSOR, MT9M111_SC_HBLANK_CONTEXT_B, 0x01, 0x60}, + {SENSOR, MT9M111_SC_VBLANK_CONTEXT_B, 0x00, 0x11}, + {SENSOR, MT9M111_SC_HBLANK_CONTEXT_A, 0x01, 0x60}, + {SENSOR, MT9M111_SC_VBLANK_CONTEXT_A, 0x00, 0x11}, + {SENSOR, MT9M111_SC_R_MODE_CONTEXT_B, 0x01, 0x0f}, + {SENSOR, MT9M111_SC_R_MODE_CONTEXT_A, 0x01, 0x0f}, + {SENSOR, 0x30, 0x04, 0x00}, + + {BRIDGE, M5602_XB_SEN_CLK_DIV, 0x06, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0, 0x00}, + {BRIDGE, M5602_XB_ADC_CTRL, 0xc0, 0x00}, + {BRIDGE, M5602_XB_SENSOR_TYPE, 0x09, 0x00}, + {BRIDGE, M5602_XB_LINE_OF_FRAME_H, 0x81, 0x00}, + {BRIDGE, M5602_XB_PIX_OF_LINE_H, 0x82, 0x00}, + {BRIDGE, M5602_XB_SIG_INI, 0x01, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x01, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0xe0, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00}, + {BRIDGE, M5602_XB_SIG_INI, 0x00, 0x00}, + {BRIDGE, M5602_XB_SIG_INI, 0x02, 0x00}, + {BRIDGE, M5602_XB_HSYNC_PARA, 0x00, 0x00}, + {BRIDGE, M5602_XB_HSYNC_PARA, 0x00, 0x00}, + {BRIDGE, M5602_XB_HSYNC_PARA, 0x02, 0x00}, + {BRIDGE, M5602_XB_HSYNC_PARA, 0x7f, 0x00}, + {BRIDGE, M5602_XB_SIG_INI, 0x00, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_DIV, 0x00, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0, 0x00}, + + {SENSOR, MT9M111_PAGE_MAP, 0x00, 0x00}, + /* Set number of blank rows chosen to 400 */ + {SENSOR, MT9M111_SC_SHUTTER_WIDTH, 0x01, 0x90}, + /* Set the global gain to 283 (of 512) */ + {SENSOR, MT9M111_SC_GLOBAL_GAIN, 0x03, 0x63} +}; + +#endif diff --git a/drivers/media/video/gspca/m5602/m5602_ov9650.c b/drivers/media/video/gspca/m5602/m5602_ov9650.c new file mode 100644 index 0000000..74c3ffe --- /dev/null +++ b/drivers/media/video/gspca/m5602/m5602_ov9650.c @@ -0,0 +1,544 @@ +/* + * Driver for the ov9650 sensor + * + * Copyright (C) 2008 Erik Andren + * Copyright (C) 2007 Ilyes Gouta. Based on the m5603x Linux Driver Project. + * Copyright (C) 2005 m5603x Linux Driver Project + * + * Portions of code to USB interface and ALi driver software, + * Copyright (c) 2006 Willem Duinker + * v4l2 interface modeled after the V4L2 driver + * for SN9C10x PC Camera Controllers + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation, version 2. + * + */ + +#include "m5602_ov9650.h" + +int ov9650_read_sensor(struct sd *sd, const u8 address, + u8 *i2c_data, const u8 len) +{ + int err, i; + + /* The ov9650 registers have a max depth of one byte */ + if (len > 1 || !len) + return -EINVAL; + + do { + err = m5602_read_bridge(sd, M5602_XB_I2C_STATUS, i2c_data); + } while ((*i2c_data & I2C_BUSY) && !err); + + m5602_write_bridge(sd, M5602_XB_I2C_DEV_ADDR, + ov9650.i2c_slave_id); + m5602_write_bridge(sd, M5602_XB_I2C_REG_ADDR, address); + m5602_write_bridge(sd, M5602_XB_I2C_CTRL, 0x10 + len); + m5602_write_bridge(sd, M5602_XB_I2C_CTRL, 0x08); + + for (i = 0; i < len; i++) { + err = m5602_read_bridge(sd, M5602_XB_I2C_DATA, &(i2c_data[i])); + + PDEBUG(DBG_TRACE, "Reading sensor register " + "0x%x containing 0x%x ", address, *i2c_data); + } + return (err < 0) ? err : 0; +} + +int ov9650_write_sensor(struct sd *sd, const u8 address, + u8 *i2c_data, const u8 len) +{ + int err, i; + u8 *p; + struct usb_device *udev = sd->gspca_dev.dev; + __u8 *buf = sd->gspca_dev.usb_buf; + + /* The ov9650 only supports one byte writes */ + if (len > 1 || !len) + return -EINVAL; + + memcpy(buf, sensor_urb_skeleton, + sizeof(sensor_urb_skeleton)); + + buf[11] = sd->sensor->i2c_slave_id; + buf[15] = address; + + /* Special case larger sensor writes */ + p = buf + 16; + + /* Copy a four byte write sequence for each byte to be written to */ + for (i = 0; i < len; i++) { + memcpy(p, sensor_urb_skeleton + 16, 4); + p[3] = i2c_data[i]; + p += 4; + PDEBUG(DBG_TRACE, "Writing sensor register 0x%x with 0x%x", + address, i2c_data[i]); + } + + /* Copy the tailer */ + memcpy(p, sensor_urb_skeleton + 20, 4); + + /* Set the total length */ + p[3] = 0x10 + len; + + err = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), + 0x04, 0x40, 0x19, + 0x0000, buf, + 20 + len * 4, M5602_URB_MSG_TIMEOUT); + + return (err < 0) ? err : 0; +} + +int ov9650_probe(struct sd *sd) +{ + u8 prod_id = 0, ver_id = 0, i; + + if (force_sensor) { + if (force_sensor == OV9650_SENSOR) { + info("Forcing an %s sensor", ov9650.name); + goto sensor_found; + } + /* If we want to force another sensor, + don't try to probe this one */ + return -ENODEV; + } + + info("Probing for an ov9650 sensor"); + + /* Run the pre-init to actually probe the unit */ + for (i = 0; i < ARRAY_SIZE(preinit_ov9650); i++) { + u8 data = preinit_ov9650[i][2]; + if (preinit_ov9650[i][0] == SENSOR) + ov9650_write_sensor(sd, + preinit_ov9650[i][1], &data, 1); + else + m5602_write_bridge(sd, preinit_ov9650[i][1], data); + } + + if (ov9650_read_sensor(sd, OV9650_PID, &prod_id, 1)) + return -ENODEV; + + if (ov9650_read_sensor(sd, OV9650_VER, &ver_id, 1)) + return -ENODEV; + + if ((prod_id == 0x96) && (ver_id == 0x52)) { + info("Detected an ov9650 sensor"); + goto sensor_found; + } + + return -ENODEV; + +sensor_found: + sd->gspca_dev.cam.cam_mode = ov9650.modes; + sd->gspca_dev.cam.nmodes = ov9650.nmodes; + return 0; +} + +int ov9650_init(struct sd *sd) +{ + int i, err = 0; + u8 data; + + if (dump_sensor) + ov9650_dump_registers(sd); + + for (i = 0; i < ARRAY_SIZE(init_ov9650) && !err; i++) { + data = init_ov9650[i][2]; + if (init_ov9650[i][0] == SENSOR) + err = ov9650_write_sensor(sd, init_ov9650[i][1], + &data, 1); + else + err = m5602_write_bridge(sd, init_ov9650[i][1], data); + } + + if (!err && dmi_check_system(ov9650_flip_dmi_table)) { + info("vflip quirk active"); + data = 0x30; + err = ov9650_write_sensor(sd, OV9650_MVFP, &data, 1); + } + + return (err < 0) ? err : 0; +} + +int ov9650_power_down(struct sd *sd) +{ + int i; + for (i = 0; i < ARRAY_SIZE(power_down_ov9650); i++) { + u8 data = power_down_ov9650[i][2]; + if (power_down_ov9650[i][0] == SENSOR) + ov9650_write_sensor(sd, + power_down_ov9650[i][1], &data, 1); + else + m5602_write_bridge(sd, power_down_ov9650[i][1], data); + } + + return 0; +} + +int ov9650_get_exposure(struct gspca_dev *gspca_dev, __s32 *val) +{ + struct sd *sd = (struct sd *) gspca_dev; + u8 i2c_data; + int err; + + err = ov9650_read_sensor(sd, OV9650_COM1, &i2c_data, 1); + if (err < 0) + goto out; + *val = i2c_data & 0x03; + + err = ov9650_read_sensor(sd, OV9650_AECH, &i2c_data, 1); + if (err < 0) + goto out; + *val |= (i2c_data << 2); + + err = ov9650_read_sensor(sd, OV9650_AECHM, &i2c_data, 1); + if (err < 0) + goto out; + *val |= (i2c_data & 0x3f) << 10; + + PDEBUG(DBG_V4L2_CID, "Read exposure %d", *val); +out: + return (err < 0) ? err : 0; +} + +int ov9650_set_exposure(struct gspca_dev *gspca_dev, __s32 val) +{ + struct sd *sd = (struct sd *) gspca_dev; + u8 i2c_data; + int err; + + PDEBUG(DBG_V4L2_CID, "Set exposure to %d", + val & 0xffff); + + /* The 6 MSBs */ + i2c_data = (val >> 10) & 0x3f; + err = ov9650_write_sensor(sd, OV9650_AECHM, + &i2c_data, 1); + if (err < 0) + goto out; + + /* The 8 middle bits */ + i2c_data = (val >> 2) & 0xff; + err = ov9650_write_sensor(sd, OV9650_AECH, + &i2c_data, 1); + if (err < 0) + goto out; + + /* The 2 LSBs */ + i2c_data = val & 0x03; + err = ov9650_write_sensor(sd, OV9650_COM1, &i2c_data, 1); + +out: + return (err < 0) ? err : 0; +} + +int ov9650_get_gain(struct gspca_dev *gspca_dev, __s32 *val) +{ + int err; + u8 i2c_data; + struct sd *sd = (struct sd *) gspca_dev; + + ov9650_read_sensor(sd, OV9650_VREF, &i2c_data, 1); + *val = (i2c_data & 0x03) << 8; + + err = ov9650_read_sensor(sd, OV9650_GAIN, &i2c_data, 1); + *val |= i2c_data; + PDEBUG(DBG_V4L2_CID, "Read gain %d", *val); + return (err < 0) ? err : 0; +} + +int ov9650_set_gain(struct gspca_dev *gspca_dev, __s32 val) +{ + int err; + u8 i2c_data; + struct sd *sd = (struct sd *) gspca_dev; + + /* The 2 MSB */ + /* Read the OV9650_VREF register first to avoid + corrupting the VREF high and low bits */ + ov9650_read_sensor(sd, OV9650_VREF, &i2c_data, 1); + /* Mask away all uninteresting bits */ + i2c_data = ((val & 0x0300) >> 2) | + (i2c_data & 0x3F); + err = ov9650_write_sensor(sd, OV9650_VREF, &i2c_data, 1); + + /* The 8 LSBs */ + i2c_data = val & 0xff; + err = ov9650_write_sensor(sd, OV9650_GAIN, &i2c_data, 1); + return (err < 0) ? err : 0; +} + +int ov9650_get_red_balance(struct gspca_dev *gspca_dev, __s32 *val) +{ + int err; + u8 i2c_data; + struct sd *sd = (struct sd *) gspca_dev; + + err = ov9650_read_sensor(sd, OV9650_RED, &i2c_data, 1); + *val = i2c_data; + + PDEBUG(DBG_V4L2_CID, "Read red gain %d", *val); + + return (err < 0) ? err : 0; +} + +int ov9650_set_red_balance(struct gspca_dev *gspca_dev, __s32 val) +{ + int err; + u8 i2c_data; + struct sd *sd = (struct sd *) gspca_dev; + + PDEBUG(DBG_V4L2_CID, "Set red gain to %d", + val & 0xff); + + i2c_data = val & 0xff; + err = ov9650_write_sensor(sd, OV9650_RED, &i2c_data, 1); + + return (err < 0) ? err : 0; +} + +int ov9650_get_blue_balance(struct gspca_dev *gspca_dev, __s32 *val) +{ + int err; + u8 i2c_data; + struct sd *sd = (struct sd *) gspca_dev; + + err = ov9650_read_sensor(sd, OV9650_BLUE, &i2c_data, 1); + *val = i2c_data; + + PDEBUG(DBG_V4L2_CID, "Read blue gain %d", *val); + + return (err < 0) ? err : 0; +} + +int ov9650_set_blue_balance(struct gspca_dev *gspca_dev, __s32 val) +{ + int err; + u8 i2c_data; + struct sd *sd = (struct sd *) gspca_dev; + + PDEBUG(DBG_V4L2_CID, "Set blue gain to %d", + val & 0xff); + + i2c_data = val & 0xff; + err = ov9650_write_sensor(sd, OV9650_BLUE, &i2c_data, 1); + + return (err < 0) ? err : 0; +} + +int ov9650_get_hflip(struct gspca_dev *gspca_dev, __s32 *val) +{ + int err; + u8 i2c_data; + struct sd *sd = (struct sd *) gspca_dev; + + err = ov9650_read_sensor(sd, OV9650_MVFP, &i2c_data, 1); + if (dmi_check_system(ov9650_flip_dmi_table)) + *val = ((i2c_data & OV9650_HFLIP) >> 5) ? 0 : 1; + else + *val = (i2c_data & OV9650_HFLIP) >> 5; + PDEBUG(DBG_V4L2_CID, "Read horizontal flip %d", *val); + + return (err < 0) ? err : 0; +} + +int ov9650_set_hflip(struct gspca_dev *gspca_dev, __s32 val) +{ + int err; + u8 i2c_data; + struct sd *sd = (struct sd *) gspca_dev; + + PDEBUG(DBG_V4L2_CID, "Set horizontal flip to %d", val); + err = ov9650_read_sensor(sd, OV9650_MVFP, &i2c_data, 1); + if (err < 0) + goto out; + + if (dmi_check_system(ov9650_flip_dmi_table)) + i2c_data = ((i2c_data & 0xdf) | + (((val ? 0 : 1) & 0x01) << 5)); + else + i2c_data = ((i2c_data & 0xdf) | + ((val & 0x01) << 5)); + + err = ov9650_write_sensor(sd, OV9650_MVFP, &i2c_data, 1); +out: + return (err < 0) ? err : 0; +} + +int ov9650_get_vflip(struct gspca_dev *gspca_dev, __s32 *val) +{ + int err; + u8 i2c_data; + struct sd *sd = (struct sd *) gspca_dev; + + err = ov9650_read_sensor(sd, OV9650_MVFP, &i2c_data, 1); + if (dmi_check_system(ov9650_flip_dmi_table)) + *val = ((i2c_data & 0x10) >> 4) ? 0 : 1; + else + *val = (i2c_data & 0x10) >> 4; + PDEBUG(DBG_V4L2_CID, "Read vertical flip %d", *val); + + return (err < 0) ? err : 0; +} + +int ov9650_set_vflip(struct gspca_dev *gspca_dev, __s32 val) +{ + int err; + u8 i2c_data; + struct sd *sd = (struct sd *) gspca_dev; + + PDEBUG(DBG_V4L2_CID, "Set vertical flip to %d", val); + err = ov9650_read_sensor(sd, OV9650_MVFP, &i2c_data, 1); + if (err < 0) + goto out; + + if (dmi_check_system(ov9650_flip_dmi_table)) + i2c_data = ((i2c_data & 0xef) | + (((val ? 0 : 1) & 0x01) << 4)); + else + i2c_data = ((i2c_data & 0xef) | + ((val & 0x01) << 4)); + + err = ov9650_write_sensor(sd, OV9650_MVFP, &i2c_data, 1); +out: + return (err < 0) ? err : 0; +} + +int ov9650_get_brightness(struct gspca_dev *gspca_dev, __s32 *val) +{ + int err; + u8 i2c_data; + struct sd *sd = (struct sd *) gspca_dev; + + err = ov9650_read_sensor(sd, OV9650_VREF, &i2c_data, 1); + if (err < 0) + goto out; + *val = (i2c_data & 0x03) << 8; + + err = ov9650_read_sensor(sd, OV9650_GAIN, &i2c_data, 1); + *val |= i2c_data; + PDEBUG(DBG_V4L2_CID, "Read gain %d", *val); +out: + return (err < 0) ? err : 0; +} + +int ov9650_set_brightness(struct gspca_dev *gspca_dev, __s32 val) +{ + int err; + u8 i2c_data; + struct sd *sd = (struct sd *) gspca_dev; + + PDEBUG(DBG_V4L2_CID, "Set gain to %d", val & 0x3ff); + + /* Read the OV9650_VREF register first to avoid + corrupting the VREF high and low bits */ + err = ov9650_read_sensor(sd, OV9650_VREF, &i2c_data, 1); + if (err < 0) + goto out; + + /* Mask away all uninteresting bits */ + i2c_data = ((val & 0x0300) >> 2) | (i2c_data & 0x3F); + err = ov9650_write_sensor(sd, OV9650_VREF, &i2c_data, 1); + if (err < 0) + goto out; + + /* The 8 LSBs */ + i2c_data = val & 0xff; + err = ov9650_write_sensor(sd, OV9650_GAIN, &i2c_data, 1); + +out: + return (err < 0) ? err : 0; +} + +int ov9650_get_auto_white_balance(struct gspca_dev *gspca_dev, __s32 *val) +{ + int err; + u8 i2c_data; + struct sd *sd = (struct sd *) gspca_dev; + + err = ov9650_read_sensor(sd, OV9650_COM8, &i2c_data, 1); + *val = (i2c_data & OV9650_AWB_EN) >> 1; + PDEBUG(DBG_V4L2_CID, "Read auto white balance %d", *val); + + return (err < 0) ? err : 0; +} + +int ov9650_set_auto_white_balance(struct gspca_dev *gspca_dev, __s32 val) +{ + int err; + u8 i2c_data; + struct sd *sd = (struct sd *) gspca_dev; + + PDEBUG(DBG_V4L2_CID, "Set auto white balance to %d", val); + err = ov9650_read_sensor(sd, OV9650_COM8, &i2c_data, 1); + if (err < 0) + goto out; + + i2c_data = ((i2c_data & 0xfd) | ((val & 0x01) << 1)); + err = ov9650_write_sensor(sd, OV9650_COM8, &i2c_data, 1); +out: + return (err < 0) ? err : 0; +} + +int ov9650_get_auto_gain(struct gspca_dev *gspca_dev, __s32 *val) +{ + int err; + u8 i2c_data; + struct sd *sd = (struct sd *) gspca_dev; + + err = ov9650_read_sensor(sd, OV9650_COM8, &i2c_data, 1); + *val = (i2c_data & OV9650_AGC_EN) >> 2; + PDEBUG(DBG_V4L2_CID, "Read auto gain control %d", *val); + + return (err < 0) ? err : 0; +} + +int ov9650_set_auto_gain(struct gspca_dev *gspca_dev, __s32 val) +{ + int err; + u8 i2c_data; + struct sd *sd = (struct sd *) gspca_dev; + + PDEBUG(DBG_V4L2_CID, "Set auto gain control to %d", val); + err = ov9650_read_sensor(sd, OV9650_COM8, &i2c_data, 1); + if (err < 0) + goto out; + + i2c_data = ((i2c_data & 0xfb) | ((val & 0x01) << 2)); + err = ov9650_write_sensor(sd, OV9650_COM8, &i2c_data, 1); +out: + return (err < 0) ? err : 0; +} + +void ov9650_dump_registers(struct sd *sd) +{ + int address; + info("Dumping the ov9650 register state"); + for (address = 0; address < 0xa9; address++) { + u8 value; + ov9650_read_sensor(sd, address, &value, 1); + info("register 0x%x contains 0x%x", + address, value); + } + + info("ov9650 register state dump complete"); + + info("Probing for which registers that are read/write"); + for (address = 0; address < 0xff; address++) { + u8 old_value, ctrl_value; + u8 test_value[2] = {0xff, 0xff}; + + ov9650_read_sensor(sd, address, &old_value, 1); + ov9650_write_sensor(sd, address, test_value, 1); + ov9650_read_sensor(sd, address, &ctrl_value, 1); + + if (ctrl_value == test_value[0]) + info("register 0x%x is writeable", address); + else + info("register 0x%x is read only", address); + + /* Restore original value */ + ov9650_write_sensor(sd, address, &old_value, 1); + } +} diff --git a/drivers/media/video/gspca/m5602/m5602_ov9650.h b/drivers/media/video/gspca/m5602/m5602_ov9650.h new file mode 100644 index 0000000..486ea33 --- /dev/null +++ b/drivers/media/video/gspca/m5602/m5602_ov9650.h @@ -0,0 +1,501 @@ +/* + * Driver for the ov9650 sensor + * + * Copyright (C) 2008 Erik Andren + * Copyright (C) 2007 Ilyes Gouta. Based on the m5603x Linux Driver Project. + * Copyright (C) 2005 m5603x Linux Driver Project + * + * Portions of code to USB interface and ALi driver software, + * Copyright (c) 2006 Willem Duinker + * v4l2 interface modeled after the V4L2 driver + * for SN9C10x PC Camera Controllers + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation, version 2. + * + */ + +#ifndef M5602_OV9650_H_ +#define M5602_OV9650_H_ + +#include + +#include "m5602_sensor.h" + +/*****************************************************************************/ + +#define OV9650_GAIN 0x00 +#define OV9650_BLUE 0x01 +#define OV9650_RED 0x02 +#define OV9650_VREF 0x03 +#define OV9650_COM1 0x04 +#define OV9650_BAVE 0x05 +#define OV9650_GEAVE 0x06 +#define OV9650_RSVD7 0x07 +#define OV9650_PID 0x0a +#define OV9650_VER 0x0b +#define OV9650_COM3 0x0c +#define OV9650_COM5 0x0e +#define OV9650_COM6 0x0f +#define OV9650_AECH 0x10 +#define OV9650_CLKRC 0x11 +#define OV9650_COM7 0x12 +#define OV9650_COM8 0x13 +#define OV9650_COM9 0x14 +#define OV9650_COM10 0x15 +#define OV9650_RSVD16 0x16 +#define OV9650_HSTART 0x17 +#define OV9650_HSTOP 0x18 +#define OV9650_VSTRT 0x19 +#define OV9650_VSTOP 0x1a +#define OV9650_PSHFT 0x1b +#define OV9650_MVFP 0x1e +#define OV9650_AEW 0x24 +#define OV9650_AEB 0x25 +#define OV9650_VPT 0x26 +#define OV9650_BBIAS 0x27 +#define OV9650_GbBIAS 0x28 +#define OV9650_Gr_COM 0x29 +#define OV9650_RBIAS 0x2c +#define OV9650_HREF 0x32 +#define OV9650_CHLF 0x33 +#define OV9650_ARBLM 0x34 +#define OV9650_RSVD35 0x35 +#define OV9650_RSVD36 0x36 +#define OV9650_ADC 0x37 +#define OV9650_ACOM38 0x38 +#define OV9650_OFON 0x39 +#define OV9650_TSLB 0x3a +#define OV9650_COM12 0x3c +#define OV9650_COM13 0x3d +#define OV9650_COM15 0x40 +#define OV9650_COM16 0x41 +#define OV9650_LCC1 0x62 +#define OV9650_LCC2 0x63 +#define OV9650_LCC3 0x64 +#define OV9650_LCC4 0x65 +#define OV9650_LCC5 0x66 +#define OV9650_HV 0x69 +#define OV9650_DBLV 0x6b +#define OV9650_COM21 0x8b +#define OV9650_COM22 0x8c +#define OV9650_COM24 0x8e +#define OV9650_DBLC1 0x8f +#define OV9650_RSVD94 0x94 +#define OV9650_RSVD95 0x95 +#define OV9650_RSVD96 0x96 +#define OV9650_LCCFB 0x9d +#define OV9650_LCCFR 0x9e +#define OV9650_AECHM 0xa1 +#define OV9650_COM26 0xa5 +#define OV9650_ACOMA8 0xa8 +#define OV9650_ACOMA9 0xa9 + +#define OV9650_REGISTER_RESET (1 << 7) +#define OV9650_VGA_SELECT (1 << 6) +#define OV9650_RGB_SELECT (1 << 2) +#define OV9650_RAW_RGB_SELECT (1 << 0) + +#define OV9650_FAST_AGC_AEC (1 << 7) +#define OV9650_AEC_UNLIM_STEP_SIZE (1 << 6) +#define OV9650_BANDING (1 << 5) +#define OV9650_AGC_EN (1 << 2) +#define OV9650_AWB_EN (1 << 1) +#define OV9650_AEC_EN (1 << 0) + +#define OV9650_VARIOPIXEL (1 << 2) +#define OV9650_SYSTEM_CLK_SEL (1 << 7) +#define OV9650_SLAM_MODE (1 << 4) + +#define OV9650_VFLIP (1 << 4) +#define OV9650_HFLIP (1 << 5) + +#define GAIN_DEFAULT 0x14 +#define RED_GAIN_DEFAULT 0x70 +#define BLUE_GAIN_DEFAULT 0x20 +#define EXPOSURE_DEFAULT 0x5003 + +/*****************************************************************************/ + +/* Kernel module parameters */ +extern int force_sensor; +extern int dump_sensor; +extern unsigned int m5602_debug; + +int ov9650_probe(struct sd *sd); +int ov9650_init(struct sd *sd); +int ov9650_power_down(struct sd *sd); + +int ov9650_read_sensor(struct sd *sd, const u8 address, + u8 *i2c_data, const u8 len); +int ov9650_write_sensor(struct sd *sd, const u8 address, + u8 *i2c_data, const u8 len); + +void ov9650_dump_registers(struct sd *sd); + +int ov9650_set_exposure(struct gspca_dev *gspca_dev, __s32 val); +int ov9650_get_exposure(struct gspca_dev *gspca_dev, __s32 *val); +int ov9650_get_gain(struct gspca_dev *gspca_dev, __s32 *val); +int ov9650_set_gain(struct gspca_dev *gspca_dev, __s32 val); +int ov9650_get_red_balance(struct gspca_dev *gspca_dev, __s32 *val); +int ov9650_set_red_balance(struct gspca_dev *gspca_dev, __s32 val); +int ov9650_get_blue_balance(struct gspca_dev *gspca_dev, __s32 *val); +int ov9650_set_blue_balance(struct gspca_dev *gspca_dev, __s32 val); +int ov9650_get_hflip(struct gspca_dev *gspca_dev, __s32 *val); +int ov9650_set_hflip(struct gspca_dev *gspca_dev, __s32 val); +int ov9650_get_vflip(struct gspca_dev *gspca_dev, __s32 *val); +int ov9650_set_vflip(struct gspca_dev *gspca_dev, __s32 val); +int ov9650_get_brightness(struct gspca_dev *gspca_dev, __s32 *val); +int ov9650_set_brightness(struct gspca_dev *gspca_dev, __s32 val); +int ov9650_get_auto_white_balance(struct gspca_dev *gspca_dev, __s32 *val); +int ov9650_set_auto_white_balance(struct gspca_dev *gspca_dev, __s32 val); +int ov9650_get_auto_gain(struct gspca_dev *gspca_dev, __s32 *val); +int ov9650_set_auto_gain(struct gspca_dev *gspca_dev, __s32 val); + +static struct m5602_sensor ov9650 = { + .name = "OV9650", + .i2c_slave_id = 0x60, + .probe = ov9650_probe, + .init = ov9650_init, + .power_down = ov9650_power_down, + .read_sensor = ov9650_read_sensor, + .write_sensor = ov9650_write_sensor, + + .nctrls = 8, + .ctrls = { + { + { + .id = V4L2_CID_EXPOSURE, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "exposure", + .minimum = 0x00, + .maximum = 0xffff, + .step = 0x1, + .default_value = EXPOSURE_DEFAULT, + .flags = V4L2_CTRL_FLAG_SLIDER + }, + .set = ov9650_set_exposure, + .get = ov9650_get_exposure + }, { + { + .id = V4L2_CID_GAIN, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "gain", + .minimum = 0x00, + .maximum = 0x3ff, + .step = 0x1, + .default_value = GAIN_DEFAULT, + .flags = V4L2_CTRL_FLAG_SLIDER + }, + .set = ov9650_set_gain, + .get = ov9650_get_gain + }, { + { + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "red balance", + .minimum = 0x00, + .maximum = 0xff, + .step = 0x1, + .default_value = RED_GAIN_DEFAULT, + .flags = V4L2_CTRL_FLAG_SLIDER + }, + .set = ov9650_set_red_balance, + .get = ov9650_get_red_balance + }, { + { + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "blue balance", + .minimum = 0x00, + .maximum = 0xff, + .step = 0x1, + .default_value = BLUE_GAIN_DEFAULT, + .flags = V4L2_CTRL_FLAG_SLIDER + }, + .set = ov9650_set_blue_balance, + .get = ov9650_get_blue_balance + }, { + { + .id = V4L2_CID_HFLIP, + .type = V4L2_CTRL_TYPE_BOOLEAN, + .name = "horizontal flip", + .minimum = 0, + .maximum = 1, + .step = 1, + .default_value = 0 + }, + .set = ov9650_set_hflip, + .get = ov9650_get_hflip + }, { + { + .id = V4L2_CID_VFLIP, + .type = V4L2_CTRL_TYPE_BOOLEAN, + .name = "vertical flip", + .minimum = 0, + .maximum = 1, + .step = 1, + .default_value = 0 + }, + .set = ov9650_set_vflip, + .get = ov9650_get_vflip + }, { + { + .id = V4L2_CID_AUTO_WHITE_BALANCE, + .type = V4L2_CTRL_TYPE_BOOLEAN, + .name = "auto white balance", + .minimum = 0, + .maximum = 1, + .step = 1, + .default_value = 0 + }, + .set = ov9650_set_auto_white_balance, + .get = ov9650_get_auto_white_balance + }, { + { + .id = V4L2_CID_AUTOGAIN, + .type = V4L2_CTRL_TYPE_BOOLEAN, + .name = "auto gain control", + .minimum = 0, + .maximum = 1, + .step = 1, + .default_value = 0 + }, + .set = ov9650_set_auto_gain, + .get = ov9650_get_auto_gain + } + }, + + .nmodes = 1, + .modes = { + { + M5602_DEFAULT_FRAME_WIDTH, + M5602_DEFAULT_FRAME_HEIGHT, + V4L2_PIX_FMT_SBGGR8, + V4L2_FIELD_NONE, + .sizeimage = + M5602_DEFAULT_FRAME_WIDTH * M5602_DEFAULT_FRAME_HEIGHT, + .bytesperline = M5602_DEFAULT_FRAME_WIDTH, + .colorspace = V4L2_COLORSPACE_SRGB, + .priv = 1 + } + } +}; + +static const unsigned char preinit_ov9650[][3] = +{ + /* [INITCAM] */ + {BRIDGE, M5602_XB_MCU_CLK_DIV, 0x02}, + {BRIDGE, M5602_XB_MCU_CLK_CTRL, 0xb0}, + {BRIDGE, M5602_XB_SEN_CLK_DIV, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0}, + {BRIDGE, M5602_XB_ADC_CTRL, 0xc0}, + {BRIDGE, M5602_XB_SENSOR_CTRL, 0x00}, + + {BRIDGE, M5602_XB_SENSOR_TYPE, 0x08}, + {BRIDGE, M5602_XB_GPIO_DIR, 0x05}, + {BRIDGE, M5602_XB_GPIO_DAT, 0x04}, + {BRIDGE, M5602_XB_GPIO_EN_H, 0x06}, + {BRIDGE, M5602_XB_GPIO_DIR_H, 0x06}, + {BRIDGE, M5602_XB_GPIO_DAT_H, 0x00}, + {BRIDGE, M5602_XB_GPIO_DAT, 0x00}, + {BRIDGE, M5602_XB_I2C_CLK_DIV, 0x0a}, + /* Reset chip */ + {SENSOR, OV9650_COM7, OV9650_REGISTER_RESET}, + /* Enable double clock */ + {SENSOR, OV9650_CLKRC, 0x80}, + /* Do something out of spec with the power */ + {SENSOR, OV9650_OFON, 0x40} +}; + +static const unsigned char init_ov9650[][3] = +{ + /* [INITCAM] */ + {BRIDGE, M5602_XB_MCU_CLK_DIV, 0x02}, + {BRIDGE, M5602_XB_MCU_CLK_CTRL, 0xb0}, + {BRIDGE, M5602_XB_SEN_CLK_DIV, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0}, + {BRIDGE, M5602_XB_ADC_CTRL, 0xc0}, + {BRIDGE, M5602_XB_SENSOR_CTRL, 0x00}, + + {BRIDGE, M5602_XB_SENSOR_TYPE, 0x08}, + {BRIDGE, M5602_XB_GPIO_DIR, 0x05}, + {BRIDGE, M5602_XB_GPIO_DAT, 0x04}, + {BRIDGE, M5602_XB_GPIO_EN_H, 0x06}, + {BRIDGE, M5602_XB_GPIO_DIR_H, 0x06}, + {BRIDGE, M5602_XB_GPIO_DAT_H, 0x00}, + {BRIDGE, M5602_XB_GPIO_DAT, 0x00}, + {BRIDGE, M5602_XB_I2C_CLK_DIV, 0x0a}, + /* Reset chip */ + {SENSOR, OV9650_COM7, OV9650_REGISTER_RESET}, + /* Enable double clock */ + {SENSOR, OV9650_CLKRC, 0x80}, + /* Do something out of spec with the power */ + {SENSOR, OV9650_OFON, 0x40}, + + /* Set QQVGA */ + {SENSOR, OV9650_COM1, 0x20}, + /* Set fast AGC/AEC algorithm with unlimited step size */ + {SENSOR, OV9650_COM8, OV9650_FAST_AGC_AEC | + OV9650_AEC_UNLIM_STEP_SIZE | + OV9650_AWB_EN | OV9650_AGC_EN}, + + {SENSOR, OV9650_CHLF, 0x10}, + {SENSOR, OV9650_ARBLM, 0xbf}, + {SENSOR, OV9650_ACOM38, 0x81}, + /* Turn off color matrix coefficient double option */ + {SENSOR, OV9650_COM16, 0x00}, + /* Enable color matrix for RGB/YUV, Delay Y channel, + set output Y/UV delay to 1 */ + {SENSOR, OV9650_COM13, 0x19}, + /* Enable digital BLC, Set output mode to U Y V Y */ + {SENSOR, OV9650_TSLB, 0x0c}, + /* Limit the AGC/AEC stable upper region */ + {SENSOR, OV9650_COM24, 0x00}, + /* Enable HREF and some out of spec things */ + {SENSOR, OV9650_COM12, 0x73}, + /* Set all DBLC offset signs to positive and + do some out of spec stuff */ + {SENSOR, OV9650_DBLC1, 0xdf}, + {SENSOR, OV9650_COM21, 0x06}, + {SENSOR, OV9650_RSVD35, 0x91}, + /* Necessary, no camera stream without it */ + {SENSOR, OV9650_RSVD16, 0x06}, + {SENSOR, OV9650_RSVD94, 0x99}, + {SENSOR, OV9650_RSVD95, 0x99}, + {SENSOR, OV9650_RSVD96, 0x04}, + /* Enable full range output */ + {SENSOR, OV9650_COM15, 0x0}, + /* Enable HREF at optical black, enable ADBLC bias, + enable ADBLC, reset timings at format change */ + {SENSOR, OV9650_COM6, 0x4b}, + /* Subtract 32 from the B channel bias */ + {SENSOR, OV9650_BBIAS, 0xa0}, + /* Subtract 32 from the Gb channel bias */ + {SENSOR, OV9650_GbBIAS, 0xa0}, + /* Do not bypass the analog BLC and to some out of spec stuff */ + {SENSOR, OV9650_Gr_COM, 0x00}, + /* Subtract 32 from the R channel bias */ + {SENSOR, OV9650_RBIAS, 0xa0}, + /* Subtract 32 from the R channel bias */ + {SENSOR, OV9650_RBIAS, 0x0}, + {SENSOR, OV9650_COM26, 0x80}, + {SENSOR, OV9650_ACOMA9, 0x98}, + /* Set the AGC/AEC stable region upper limit */ + {SENSOR, OV9650_AEW, 0x68}, + /* Set the AGC/AEC stable region lower limit */ + {SENSOR, OV9650_AEB, 0x5c}, + /* Set the high and low limit nibbles to 3 */ + {SENSOR, OV9650_VPT, 0xc3}, + /* Set the Automatic Gain Ceiling (AGC) to 128x, + drop VSYNC at frame drop, + limit exposure timing, + drop frame when the AEC step is larger than the exposure gap */ + {SENSOR, OV9650_COM9, 0x6e}, + /* Set VSYNC negative, Set RESET to SLHS (slave mode horizontal sync) + and set PWDN to SLVS (slave mode vertical sync) */ + {SENSOR, OV9650_COM10, 0x42}, + /* Set horizontal column start high to default value */ + {SENSOR, OV9650_HSTART, 0x1a}, + /* Set horizontal column end */ + {SENSOR, OV9650_HSTOP, 0xbf}, + /* Complementing register to the two writes above */ + {SENSOR, OV9650_HREF, 0xb2}, + /* Set vertical row start high bits */ + {SENSOR, OV9650_VSTRT, 0x02}, + /* Set vertical row end low bits */ + {SENSOR, OV9650_VSTOP, 0x7e}, + /* Set complementing vertical frame control */ + {SENSOR, OV9650_VREF, 0x10}, + /* Set raw RGB output format with VGA resolution */ + {SENSOR, OV9650_COM7, OV9650_VGA_SELECT | + OV9650_RGB_SELECT | + OV9650_RAW_RGB_SELECT}, + {SENSOR, OV9650_ADC, 0x04}, + {SENSOR, OV9650_HV, 0x40}, + /* Enable denoise, and white-pixel erase */ + {SENSOR, OV9650_COM22, 0x23}, + + /* Set the high bits of the exposure value */ + {SENSOR, OV9650_AECH, ((EXPOSURE_DEFAULT & 0xff00) >> 8)}, + + /* Set the low bits of the exposure value */ + {SENSOR, OV9650_COM1, (EXPOSURE_DEFAULT & 0xff)}, + {SENSOR, OV9650_GAIN, GAIN_DEFAULT}, + {SENSOR, OV9650_BLUE, BLUE_GAIN_DEFAULT}, + {SENSOR, OV9650_RED, RED_GAIN_DEFAULT}, + + {SENSOR, OV9650_COM3, OV9650_VARIOPIXEL}, + {SENSOR, OV9650_COM5, OV9650_SYSTEM_CLK_SEL}, + + {BRIDGE, M5602_XB_LINE_OF_FRAME_H, 0x82}, + {BRIDGE, M5602_XB_LINE_OF_FRAME_L, 0x00}, + {BRIDGE, M5602_XB_PIX_OF_LINE_H, 0x82}, + {BRIDGE, M5602_XB_PIX_OF_LINE_L, 0x00}, + {BRIDGE, M5602_XB_SIG_INI, 0x01}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x09}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x01}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0xe0}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x00}, + {BRIDGE, M5602_XB_HSYNC_PARA, 0x00}, + {BRIDGE, M5602_XB_HSYNC_PARA, 0x5e}, + {BRIDGE, M5602_XB_HSYNC_PARA, 0x02}, + {BRIDGE, M5602_XB_HSYNC_PARA, 0xde} +}; + +static const unsigned char power_down_ov9650[][3] = +{ + {BRIDGE, M5602_XB_SEN_CLK_DIV, 0x04}, + {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0}, + {SENSOR, OV9650_COM7, 0x80}, + {SENSOR, OV9650_OFON, 0xf4}, + {SENSOR, OV9650_MVFP, 0x80}, + {SENSOR, OV9650_DBLV, 0x3f}, + {SENSOR, OV9650_RSVD36, 0x49}, + {SENSOR, OV9650_COM7, 0x05}, + + {BRIDGE, M5602_XB_GPIO_DIR, 0x05}, + {BRIDGE, M5602_XB_GPIO_DAT, 0x04}, + {BRIDGE, M5602_XB_GPIO_EN_H, 0x06}, + {BRIDGE, M5602_XB_GPIO_EN_L, 0x06}, + {BRIDGE, M5602_XB_GPIO_DAT_H, 0x02}, + {BRIDGE, M5602_XB_SEN_CLK_DIV, 0x04}, + {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0} +}; + +/* Vertically and horizontally flips the image if matched, needed for machines + where the sensor is mounted upside down */ +static const struct dmi_system_id ov9650_flip_dmi_table[] = { + { + .ident = "ASUS A6VC", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK Computer Inc."), + DMI_MATCH(DMI_PRODUCT_NAME, "A6VC") + } + }, + { + .ident = "ASUS A6VM", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK Computer Inc."), + DMI_MATCH(DMI_PRODUCT_NAME, "A6VM") + } + }, + { + .ident = "ASUS A6JC", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK Computer Inc."), + DMI_MATCH(DMI_PRODUCT_NAME, "A6JC") + } + }, + { + .ident = "ASUS A6Kt", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK Computer Inc."), + DMI_MATCH(DMI_PRODUCT_NAME, "A6Kt") + } + }, + { } +}; + +#endif diff --git a/drivers/media/video/gspca/m5602/m5602_po1030.c b/drivers/media/video/gspca/m5602/m5602_po1030.c new file mode 100644 index 0000000..14a8f92 --- /dev/null +++ b/drivers/media/video/gspca/m5602/m5602_po1030.c @@ -0,0 +1,334 @@ +/* + * Driver for the po1030 sensor + * + * Copyright (c) 2008 Erik Andren + * Copyright (c) 2007 Ilyes Gouta. Based on the m5603x Linux Driver Project. + * Copyright (c) 2005 m5603x Linux Driver Project + * + * Portions of code to USB interface and ALi driver software, + * Copyright (c) 2006 Willem Duinker + * v4l2 interface modeled after the V4L2 driver + * for SN9C10x PC Camera Controllers + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation, version 2. + * + */ + +#include "m5602_po1030.h" + +int po1030_probe(struct sd *sd) +{ + u8 prod_id = 0, ver_id = 0, i; + + if (force_sensor) { + if (force_sensor == PO1030_SENSOR) { + info("Forcing a %s sensor", po1030.name); + goto sensor_found; + } + /* If we want to force another sensor, don't try to probe this + * one */ + return -ENODEV; + } + + info("Probing for a po1030 sensor"); + + /* Run the pre-init to actually probe the unit */ + for (i = 0; i < ARRAY_SIZE(preinit_po1030); i++) { + u8 data = preinit_po1030[i][2]; + if (preinit_po1030[i][0] == SENSOR) + po1030_write_sensor(sd, + preinit_po1030[i][1], &data, 1); + else + m5602_write_bridge(sd, preinit_po1030[i][1], data); + } + + if (po1030_read_sensor(sd, 0x3, &prod_id, 1)) + return -ENODEV; + + if (po1030_read_sensor(sd, 0x4, &ver_id, 1)) + return -ENODEV; + + if ((prod_id == 0x02) && (ver_id == 0xef)) { + info("Detected a po1030 sensor"); + goto sensor_found; + } + return -ENODEV; + +sensor_found: + sd->gspca_dev.cam.cam_mode = po1030.modes; + sd->gspca_dev.cam.nmodes = po1030.nmodes; + return 0; +} + +int po1030_read_sensor(struct sd *sd, const u8 address, + u8 *i2c_data, const u8 len) +{ + int err, i; + + do { + err = m5602_read_bridge(sd, M5602_XB_I2C_STATUS, i2c_data); + } while ((*i2c_data & I2C_BUSY) && !err); + + m5602_write_bridge(sd, M5602_XB_I2C_DEV_ADDR, + sd->sensor->i2c_slave_id); + m5602_write_bridge(sd, M5602_XB_I2C_REG_ADDR, address); + m5602_write_bridge(sd, M5602_XB_I2C_CTRL, 0x10 + len); + m5602_write_bridge(sd, M5602_XB_I2C_CTRL, 0x08); + + for (i = 0; i < len; i++) { + err = m5602_read_bridge(sd, M5602_XB_I2C_DATA, &(i2c_data[i])); + + PDEBUG(DBG_TRACE, "Reading sensor register " + "0x%x containing 0x%x ", address, *i2c_data); + } + return (err < 0) ? err : 0; +} + +int po1030_write_sensor(struct sd *sd, const u8 address, + u8 *i2c_data, const u8 len) +{ + int err, i; + u8 *p; + struct usb_device *udev = sd->gspca_dev.dev; + __u8 *buf = sd->gspca_dev.usb_buf; + + /* The po1030 only supports one byte writes */ + if (len > 1 || !len) + return -EINVAL; + + memcpy(buf, sensor_urb_skeleton, sizeof(sensor_urb_skeleton)); + + buf[11] = sd->sensor->i2c_slave_id; + buf[15] = address; + + p = buf + 16; + + /* Copy a four byte write sequence for each byte to be written to */ + for (i = 0; i < len; i++) { + memcpy(p, sensor_urb_skeleton + 16, 4); + p[3] = i2c_data[i]; + p += 4; + PDEBUG(DBG_TRACE, "Writing sensor register 0x%x with 0x%x", + address, i2c_data[i]); + } + + /* Copy the footer */ + memcpy(p, sensor_urb_skeleton + 20, 4); + + /* Set the total length */ + p[3] = 0x10 + len; + + err = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), + 0x04, 0x40, 0x19, + 0x0000, buf, + 20 + len * 4, M5602_URB_MSG_TIMEOUT); + + return (err < 0) ? err : 0; +} + +int po1030_init(struct sd *sd) +{ + int i, err = 0; + + /* Init the sensor */ + for (i = 0; i < ARRAY_SIZE(init_po1030); i++) { + u8 data[2] = {0x00, 0x00}; + + switch (init_po1030[i][0]) { + case BRIDGE: + err = m5602_write_bridge(sd, + init_po1030[i][1], + init_po1030[i][2]); + break; + + case SENSOR: + data[0] = init_po1030[i][2]; + err = po1030_write_sensor(sd, + init_po1030[i][1], data, 1); + break; + + case SENSOR_LONG: + data[0] = init_po1030[i][2]; + data[1] = init_po1030[i][3]; + err = po1030_write_sensor(sd, + init_po1030[i][1], data, 2); + break; + default: + info("Invalid stream command, exiting init"); + return -EINVAL; + } + } + + if (dump_sensor) + po1030_dump_registers(sd); + + return (err < 0) ? err : 0; +} + +int po1030_get_exposure(struct gspca_dev *gspca_dev, __s32 *val) +{ + struct sd *sd = (struct sd *) gspca_dev; + u8 i2c_data; + int err; + + err = po1030_read_sensor(sd, PO1030_REG_INTEGLINES_H, + &i2c_data, 1); + if (err < 0) + goto out; + *val = (i2c_data << 8); + + err = po1030_read_sensor(sd, PO1030_REG_INTEGLINES_M, + &i2c_data, 1); + *val |= i2c_data; + + PDEBUG(DBG_V4L2_CID, "Exposure read as %d", *val); +out: + return (err < 0) ? err : 0; +} + +int po1030_set_exposure(struct gspca_dev *gspca_dev, __s32 val) +{ + struct sd *sd = (struct sd *) gspca_dev; + u8 i2c_data; + int err; + + PDEBUG(DBG_V4L2, "Set exposure to %d", val & 0xffff); + + i2c_data = ((val & 0xff00) >> 8); + PDEBUG(DBG_V4L2, "Set exposure to high byte to 0x%x", + i2c_data); + + err = po1030_write_sensor(sd, PO1030_REG_INTEGLINES_H, + &i2c_data, 1); + if (err < 0) + goto out; + + i2c_data = (val & 0xff); + PDEBUG(DBG_V4L2, "Set exposure to low byte to 0x%x", + i2c_data); + err = po1030_write_sensor(sd, PO1030_REG_INTEGLINES_M, + &i2c_data, 1); + +out: + return (err < 0) ? err : 0; +} + +int po1030_get_gain(struct gspca_dev *gspca_dev, __s32 *val) +{ + struct sd *sd = (struct sd *) gspca_dev; + u8 i2c_data; + int err; + + err = po1030_read_sensor(sd, PO1030_REG_GLOBALGAIN, + &i2c_data, 1); + *val = i2c_data; + PDEBUG(DBG_V4L2_CID, "Read global gain %d", *val); + + return (err < 0) ? err : 0; +} + +int po1030_set_gain(struct gspca_dev *gspca_dev, __s32 val) +{ + struct sd *sd = (struct sd *) gspca_dev; + u8 i2c_data; + int err; + + i2c_data = val & 0xff; + PDEBUG(DBG_V4L2, "Set global gain to %d", i2c_data); + err = po1030_write_sensor(sd, PO1030_REG_GLOBALGAIN, + &i2c_data, 1); + return (err < 0) ? err : 0; +} + +int po1030_get_red_balance(struct gspca_dev *gspca_dev, __s32 *val) +{ + struct sd *sd = (struct sd *) gspca_dev; + u8 i2c_data; + int err; + + err = po1030_read_sensor(sd, PO1030_REG_RED_GAIN, + &i2c_data, 1); + *val = i2c_data; + PDEBUG(DBG_V4L2_CID, "Read red gain %d", *val); + return (err < 0) ? err : 0; +} + +int po1030_set_red_balance(struct gspca_dev *gspca_dev, __s32 val) +{ + struct sd *sd = (struct sd *) gspca_dev; + u8 i2c_data; + int err; + + i2c_data = val & 0xff; + PDEBUG(DBG_V4L2, "Set red gain to %d", i2c_data); + err = po1030_write_sensor(sd, PO1030_REG_RED_GAIN, + &i2c_data, 1); + return (err < 0) ? err : 0; +} + +int po1030_get_blue_balance(struct gspca_dev *gspca_dev, __s32 *val) +{ + struct sd *sd = (struct sd *) gspca_dev; + u8 i2c_data; + int err; + + err = po1030_read_sensor(sd, PO1030_REG_BLUE_GAIN, + &i2c_data, 1); + *val = i2c_data; + PDEBUG(DBG_V4L2_CID, "Read blue gain %d", *val); + + return (err < 0) ? err : 0; +} + +int po1030_set_blue_balance(struct gspca_dev *gspca_dev, __s32 val) +{ + struct sd *sd = (struct sd *) gspca_dev; + u8 i2c_data; + int err; + i2c_data = val & 0xff; + PDEBUG(DBG_V4L2, "Set blue gain to %d", i2c_data); + err = po1030_write_sensor(sd, PO1030_REG_BLUE_GAIN, + &i2c_data, 1); + + return (err < 0) ? err : 0; +} + +int po1030_power_down(struct sd *sd) +{ + return 0; +} + +void po1030_dump_registers(struct sd *sd) +{ + int address; + u8 value = 0; + + info("Dumping the po1030 sensor core registers"); + for (address = 0; address < 0x7f; address++) { + po1030_read_sensor(sd, address, &value, 1); + info("register 0x%x contains 0x%x", + address, value); + } + + info("po1030 register state dump complete"); + + info("Probing for which registers that are read/write"); + for (address = 0; address < 0xff; address++) { + u8 old_value, ctrl_value; + u8 test_value[2] = {0xff, 0xff}; + + po1030_read_sensor(sd, address, &old_value, 1); + po1030_write_sensor(sd, address, test_value, 1); + po1030_read_sensor(sd, address, &ctrl_value, 1); + + if (ctrl_value == test_value[0]) + info("register 0x%x is writeable", address); + else + info("register 0x%x is read only", address); + + /* Restore original value */ + po1030_write_sensor(sd, address, &old_value, 1); + } +} diff --git a/drivers/media/video/gspca/m5602/m5602_po1030.h b/drivers/media/video/gspca/m5602/m5602_po1030.h new file mode 100644 index 0000000..68f34c9 --- /dev/null +++ b/drivers/media/video/gspca/m5602/m5602_po1030.h @@ -0,0 +1,478 @@ +/* + * Driver for the po1030 sensor. + * This is probably a pixel plus sensor but we haven't identified it yet + * + * Copyright (c) 2008 Erik Andren + * Copyright (c) 2007 Ilyes Gouta. Based on the m5603x Linux Driver Project. + * Copyright (c) 2005 m5603x Linux Driver Project + * + * Portions of code to USB interface and ALi driver software, + * Copyright (c) 2006 Willem Duinker + * v4l2 interface modeled after the V4L2 driver + * for SN9C10x PC Camera Controllers + * + * Register defines taken from Pascal Stangs Proxycon Armlib + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation, version 2. + * + */ + +#ifndef M5602_PO1030_H_ +#define M5602_PO1030_H_ + +#include "m5602_sensor.h" + +/*****************************************************************************/ + +#define PO1030_REG_DEVID_H 0x00 +#define PO1030_REG_DEVID_L 0x01 +#define PO1030_REG_FRAMEWIDTH_H 0x04 +#define PO1030_REG_FRAMEWIDTH_L 0x05 +#define PO1030_REG_FRAMEHEIGHT_H 0x06 +#define PO1030_REG_FRAMEHEIGHT_L 0x07 +#define PO1030_REG_WINDOWX_H 0x08 +#define PO1030_REG_WINDOWX_L 0x09 +#define PO1030_REG_WINDOWY_H 0x0a +#define PO1030_REG_WINDOWY_L 0x0b +#define PO1030_REG_WINDOWWIDTH_H 0x0c +#define PO1030_REG_WINDOWWIDTH_L 0x0d +#define PO1030_REG_WINDOWHEIGHT_H 0x0e +#define PO1030_REG_WINDOWHEIGHT_L 0x0f + +#define PO1030_REG_GLOBALIBIAS 0x12 +#define PO1030_REG_PIXELIBIAS 0x13 + +#define PO1030_REG_GLOBALGAIN 0x15 +#define PO1030_REG_RED_GAIN 0x16 +#define PO1030_REG_GREEN_1_GAIN 0x17 +#define PO1030_REG_BLUE_GAIN 0x18 +#define PO1030_REG_GREEN_2_GAIN 0x19 + +#define PO1030_REG_INTEGLINES_H 0x1a +#define PO1030_REG_INTEGLINES_M 0x1b +#define PO1030_REG_INTEGLINES_L 0x1c + +#define PO1030_REG_CONTROL1 0x1d +#define PO1030_REG_CONTROL2 0x1e +#define PO1030_REG_CONTROL3 0x1f +#define PO1030_REG_CONTROL4 0x20 + +#define PO1030_REG_PERIOD50_H 0x23 +#define PO1030_REG_PERIOD50_L 0x24 +#define PO1030_REG_PERIOD60_H 0x25 +#define PO1030_REG_PERIOD60_L 0x26 +#define PO1030_REG_REGCLK167 0x27 +#define PO1030_REG_DELTA50 0x28 +#define PO1030_REG_DELTA60 0x29 + +#define PO1030_REG_ADCOFFSET 0x2c + +/* Gamma Correction Coeffs */ +#define PO1030_REG_GC0 0x2d +#define PO1030_REG_GC1 0x2e +#define PO1030_REG_GC2 0x2f +#define PO1030_REG_GC3 0x30 +#define PO1030_REG_GC4 0x31 +#define PO1030_REG_GC5 0x32 +#define PO1030_REG_GC6 0x33 +#define PO1030_REG_GC7 0x34 + +/* Color Transform Matrix */ +#define PO1030_REG_CT0 0x35 +#define PO1030_REG_CT1 0x36 +#define PO1030_REG_CT2 0x37 +#define PO1030_REG_CT3 0x38 +#define PO1030_REG_CT4 0x39 +#define PO1030_REG_CT5 0x3a +#define PO1030_REG_CT6 0x3b +#define PO1030_REG_CT7 0x3c +#define PO1030_REG_CT8 0x3d + +#define PO1030_REG_AUTOCTRL1 0x3e +#define PO1030_REG_AUTOCTRL2 0x3f + +#define PO1030_REG_YTARGET 0x40 +#define PO1030_REG_GLOBALGAINMIN 0x41 +#define PO1030_REG_GLOBALGAINMAX 0x42 + +/* Output format control */ +#define PO1030_REG_OUTFORMCTRL1 0x5a +#define PO1030_REG_OUTFORMCTRL2 0x5b +#define PO1030_REG_OUTFORMCTRL3 0x5c +#define PO1030_REG_OUTFORMCTRL4 0x5d +#define PO1030_REG_OUTFORMCTRL5 0x5e + +/* Imaging coefficients */ +#define PO1030_REG_YBRIGHT 0x73 +#define PO1030_REG_YCONTRAST 0x74 +#define PO1030_REG_YSATURATION 0x75 + +/*****************************************************************************/ + +#define PO1030_GLOBAL_GAIN_DEFAULT 0x12 +#define PO1030_EXPOSURE_DEFAULT 0xf0ff +#define PO1030_BLUE_GAIN_DEFAULT 0x40 +#define PO1030_RED_GAIN_DEFAULT 0x40 + +/*****************************************************************************/ + +/* Kernel module parameters */ +extern int force_sensor; +extern int dump_sensor; +extern unsigned int m5602_debug; + +int po1030_probe(struct sd *sd); +int po1030_init(struct sd *sd); +int po1030_power_down(struct sd *sd); + +void po1030_dump_registers(struct sd *sd); + +int po1030_read_sensor(struct sd *sd, const u8 address, + u8 *i2c_data, const u8 len); +int po1030_write_sensor(struct sd *sd, const u8 address, + u8 *i2c_data, const u8 len); + +int po1030_get_exposure(struct gspca_dev *gspca_dev, __s32 *val); +int po1030_set_exposure(struct gspca_dev *gspca_dev, __s32 val); +int po1030_get_gain(struct gspca_dev *gspca_dev, __s32 *val); +int po1030_set_gain(struct gspca_dev *gspca_dev, __s32 val); +int po1030_get_red_balance(struct gspca_dev *gspca_dev, __s32 *val); +int po1030_set_red_balance(struct gspca_dev *gspca_dev, __s32 val); +int po1030_get_blue_balance(struct gspca_dev *gspca_dev, __s32 *val); +int po1030_set_blue_balance(struct gspca_dev *gspca_dev, __s32 val); + +static struct m5602_sensor po1030 = { + .name = "PO1030", + + .i2c_slave_id = 0xdc, + + .probe = po1030_probe, + .init = po1030_init, + .power_down = po1030_power_down, + + .nctrls = 4, + .ctrls = { + { + { + .id = V4L2_CID_GAIN, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "gain", + .minimum = 0x00, + .maximum = 0xff, + .step = 0x1, + .default_value = PO1030_GLOBAL_GAIN_DEFAULT, + .flags = V4L2_CTRL_FLAG_SLIDER + }, + .set = po1030_set_gain, + .get = po1030_get_gain + }, { + { + .id = V4L2_CID_EXPOSURE, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "exposure", + .minimum = 0x00, + .maximum = 0xffff, + .step = 0x1, + .default_value = PO1030_EXPOSURE_DEFAULT, + .flags = V4L2_CTRL_FLAG_SLIDER + }, + .set = po1030_set_exposure, + .get = po1030_get_exposure + }, { + { + .id = V4L2_CID_RED_BALANCE, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "red balance", + .minimum = 0x00, + .maximum = 0xff, + .step = 0x1, + .default_value = PO1030_RED_GAIN_DEFAULT, + .flags = V4L2_CTRL_FLAG_SLIDER + }, + .set = po1030_set_red_balance, + .get = po1030_get_red_balance + }, { + { + .id = V4L2_CID_BLUE_BALANCE, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "blue balance", + .minimum = 0x00, + .maximum = 0xff, + .step = 0x1, + .default_value = PO1030_BLUE_GAIN_DEFAULT, + .flags = V4L2_CTRL_FLAG_SLIDER + }, + .set = po1030_set_blue_balance, + .get = po1030_get_blue_balance + } + }, + .nmodes = 1, + .modes = { + { + M5602_DEFAULT_FRAME_WIDTH, + M5602_DEFAULT_FRAME_HEIGHT, + V4L2_PIX_FMT_SBGGR8, + V4L2_FIELD_NONE, + .sizeimage = + M5602_DEFAULT_FRAME_WIDTH * M5602_DEFAULT_FRAME_HEIGHT, + .bytesperline = M5602_DEFAULT_FRAME_WIDTH, + .colorspace = V4L2_COLORSPACE_SRGB, + .priv = 1 + } + } +}; + +static const unsigned char preinit_po1030[][3] = +{ + {BRIDGE, M5602_XB_MCU_CLK_DIV, 0x02}, + {BRIDGE, M5602_XB_MCU_CLK_CTRL, 0xb0}, + {BRIDGE, M5602_XB_SEN_CLK_DIV, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0}, + {BRIDGE, M5602_XB_ADC_CTRL, 0xc0}, + {BRIDGE, M5602_XB_SENSOR_TYPE, 0x0d}, + {BRIDGE, M5602_XB_SENSOR_CTRL, 0x00}, + {BRIDGE, M5602_XB_ADC_CTRL, 0xc0}, + {BRIDGE, M5602_XB_SENSOR_TYPE, 0x0c}, + + {SENSOR, PO1030_REG_AUTOCTRL2, 0x24}, + + {BRIDGE, M5602_XB_GPIO_DIR, 0x05}, + {BRIDGE, M5602_XB_GPIO_DAT, 0x04}, + {BRIDGE, M5602_XB_GPIO_EN_H, 0x06}, + {BRIDGE, M5602_XB_GPIO_DIR_H, 0x06}, + {BRIDGE, M5602_XB_GPIO_DAT_H, 0x02}, + {BRIDGE, M5602_XB_SEN_CLK_DIV, 0x04}, + {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0}, + {BRIDGE, M5602_XB_SEN_CLK_DIV, 0x06}, + {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0}, + {BRIDGE, M5602_XB_ADC_CTRL, 0xc0}, + {BRIDGE, M5602_XB_SENSOR_TYPE, 0x0c}, + {BRIDGE, M5602_XB_LINE_OF_FRAME_H, 0x81}, + {BRIDGE, M5602_XB_PIX_OF_LINE_H, 0x82}, + {BRIDGE, M5602_XB_SIG_INI, 0x01}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x02}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x01}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0xec}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x00}, + {BRIDGE, M5602_XB_SIG_INI, 0x00}, + {BRIDGE, M5602_XB_SIG_INI, 0x02}, + {BRIDGE, M5602_XB_HSYNC_PARA, 0x00}, + {BRIDGE, M5602_XB_HSYNC_PARA, 0x00}, + {BRIDGE, M5602_XB_HSYNC_PARA, 0x02}, + {BRIDGE, M5602_XB_HSYNC_PARA, 0x87}, + {BRIDGE, M5602_XB_SIG_INI, 0x00}, + + {SENSOR, PO1030_REG_AUTOCTRL2, 0x24}, + + {BRIDGE, M5602_XB_GPIO_DIR, 0x05}, + {BRIDGE, M5602_XB_GPIO_DAT, 0x04}, + {BRIDGE, M5602_XB_GPIO_EN_H, 0x06}, + {BRIDGE, M5602_XB_GPIO_DIR_H, 0x06}, + {BRIDGE, M5602_XB_GPIO_DAT_H, 0x02}, + {BRIDGE, M5602_XB_SEN_CLK_DIV, 0x04}, + {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0}, + {BRIDGE, M5602_XB_SEN_CLK_DIV, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0}, + {BRIDGE, M5602_XB_ADC_CTRL, 0xc0}, + {BRIDGE, M5602_XB_SENSOR_TYPE, 0x0c}, + {BRIDGE, M5602_XB_GPIO_DIR, 0x05}, + {BRIDGE, M5602_XB_GPIO_DAT, 0x00} +}; + +static const unsigned char init_po1030[][4] = +{ + {BRIDGE, M5602_XB_MCU_CLK_DIV, 0x02}, + {BRIDGE, M5602_XB_MCU_CLK_CTRL, 0xb0}, + /*sequence 1*/ + {BRIDGE, M5602_XB_SEN_CLK_DIV, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0}, + {BRIDGE, M5602_XB_ADC_CTRL, 0xc0}, + {BRIDGE, M5602_XB_SENSOR_TYPE, 0x0d}, + + {BRIDGE, M5602_XB_SENSOR_CTRL, 0x00}, + {BRIDGE, M5602_XB_ADC_CTRL, 0xc0}, + {BRIDGE, M5602_XB_SENSOR_TYPE, 0x0c}, + /*end of sequence 1*/ + + /*sequence 2 (same as stop sequence)*/ + {SENSOR, PO1030_REG_AUTOCTRL2, 0x24}, + {BRIDGE, M5602_XB_GPIO_DIR, 0x05}, + {BRIDGE, M5602_XB_GPIO_DAT, 0x04}, + {BRIDGE, M5602_XB_GPIO_EN_H, 0x06}, + {BRIDGE, M5602_XB_GPIO_DIR_H, 0x06}, + {BRIDGE, M5602_XB_GPIO_DAT_H, 0x02}, + + {BRIDGE, M5602_XB_SEN_CLK_DIV, 0x04}, + {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0}, + /*end of sequence 2*/ + + /*sequence 5*/ + {BRIDGE, M5602_XB_SEN_CLK_DIV, 0x06}, + {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0}, + {BRIDGE, M5602_XB_ADC_CTRL, 0xc0}, + {BRIDGE, M5602_XB_SENSOR_TYPE, 0x0c}, + {BRIDGE, M5602_XB_LINE_OF_FRAME_H, 0x81}, + {BRIDGE, M5602_XB_PIX_OF_LINE_H, 0x82}, + {BRIDGE, M5602_XB_SIG_INI, 0x01}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x02}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x01}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0xec}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x00}, + {BRIDGE, M5602_XB_SIG_INI, 0x00}, + {BRIDGE, M5602_XB_SIG_INI, 0x02}, + {BRIDGE, M5602_XB_HSYNC_PARA, 0x00}, + {BRIDGE, M5602_XB_HSYNC_PARA, 0x00}, + {BRIDGE, M5602_XB_HSYNC_PARA, 0x02}, + {BRIDGE, M5602_XB_HSYNC_PARA, 0x87}, + {BRIDGE, M5602_XB_SIG_INI, 0x00}, + /*end of sequence 5*/ + + /*sequence 2 stop */ + {SENSOR, PO1030_REG_AUTOCTRL2, 0x24}, + + {BRIDGE, M5602_XB_GPIO_DIR, 0x05}, + {BRIDGE, M5602_XB_GPIO_DAT, 0x04}, + {BRIDGE, M5602_XB_GPIO_EN_H, 0x06}, + {BRIDGE, M5602_XB_GPIO_DIR_H, 0x06}, + {BRIDGE, M5602_XB_GPIO_DAT_H, 0x02}, + {BRIDGE, M5602_XB_SEN_CLK_DIV, 0x04}, + {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0}, + /*end of sequence 2 stop */ + +/* --------------------------------- + * end of init - begin of start + * --------------------------------- */ + + /*sequence 3*/ + {BRIDGE, M5602_XB_SEN_CLK_DIV, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0}, + {BRIDGE, M5602_XB_ADC_CTRL, 0xc0}, + {BRIDGE, M5602_XB_SENSOR_TYPE, 0x0c}, + /*end of sequence 3*/ + /*sequence 4*/ + {BRIDGE, M5602_XB_GPIO_DIR, 0x05}, + {BRIDGE, M5602_XB_GPIO_DAT, 0x00}, + {BRIDGE, M5602_XB_GPIO_EN_H, 0x06}, + {BRIDGE, M5602_XB_GPIO_EN_L, 0x00}, + + {SENSOR, PO1030_REG_AUTOCTRL2, 0x04}, + + /* Set the width to 751 */ + {SENSOR, PO1030_REG_FRAMEWIDTH_H, 0x02}, + {SENSOR, PO1030_REG_FRAMEWIDTH_L, 0xef}, + + /* Set the height to 540 */ + {SENSOR, PO1030_REG_FRAMEHEIGHT_H, 0x02}, + {SENSOR, PO1030_REG_FRAMEHEIGHT_L, 0x1c}, + + /* Set the x window to 1 */ + {SENSOR, PO1030_REG_WINDOWX_H, 0x00}, + {SENSOR, PO1030_REG_WINDOWX_L, 0x01}, + + /* Set the y window to 1 */ + {SENSOR, PO1030_REG_WINDOWY_H, 0x00}, + {SENSOR, PO1030_REG_WINDOWX_L, 0x01}, + + {SENSOR, PO1030_REG_WINDOWWIDTH_H, 0x02}, + {SENSOR, PO1030_REG_WINDOWWIDTH_L, 0x87}, + {SENSOR, PO1030_REG_WINDOWHEIGHT_H, 0x01}, + {SENSOR, PO1030_REG_WINDOWHEIGHT_L, 0xe3}, + + {SENSOR, PO1030_REG_OUTFORMCTRL2, 0x04}, + {SENSOR, PO1030_REG_OUTFORMCTRL2, 0x04}, + {SENSOR, PO1030_REG_AUTOCTRL1, 0x08}, + {SENSOR, PO1030_REG_CONTROL2, 0x03}, + {SENSOR, 0x21, 0x90}, + {SENSOR, PO1030_REG_YTARGET, 0x60}, + {SENSOR, 0x59, 0x13}, + {SENSOR, PO1030_REG_OUTFORMCTRL1, 0x40}, + {SENSOR, 0x5f, 0x00}, + {SENSOR, 0x60, 0x80}, + {SENSOR, 0x78, 0x14}, + {SENSOR, 0x6f, 0x01}, + {SENSOR, PO1030_REG_CONTROL1, 0x18}, + {SENSOR, PO1030_REG_GLOBALGAINMAX, 0x14}, + {SENSOR, 0x63, 0x38}, + {SENSOR, 0x64, 0x38}, + {SENSOR, PO1030_REG_CONTROL1, 0x58}, + {SENSOR, PO1030_REG_RED_GAIN, 0x30}, + {SENSOR, PO1030_REG_GREEN_1_GAIN, 0x30}, + {SENSOR, PO1030_REG_BLUE_GAIN, 0x30}, + {SENSOR, PO1030_REG_GREEN_2_GAIN, 0x30}, + {SENSOR, PO1030_REG_GC0, 0x10}, + {SENSOR, PO1030_REG_GC1, 0x20}, + {SENSOR, PO1030_REG_GC2, 0x40}, + {SENSOR, PO1030_REG_GC3, 0x60}, + {SENSOR, PO1030_REG_GC4, 0x80}, + {SENSOR, PO1030_REG_GC5, 0xa0}, + {SENSOR, PO1030_REG_GC6, 0xc0}, + {SENSOR, PO1030_REG_GC7, 0xff}, + /*end of sequence 4*/ + /*sequence 5*/ + {BRIDGE, M5602_XB_SEN_CLK_DIV, 0x06}, + {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0}, + {BRIDGE, M5602_XB_ADC_CTRL, 0xc0}, + {BRIDGE, M5602_XB_SENSOR_TYPE, 0x0c}, + {BRIDGE, M5602_XB_LINE_OF_FRAME_H, 0x81}, + {BRIDGE, M5602_XB_PIX_OF_LINE_H, 0x82}, + {BRIDGE, M5602_XB_SIG_INI, 0x01}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x02}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x01}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0xec}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x00}, + {BRIDGE, M5602_XB_SIG_INI, 0x00}, + {BRIDGE, M5602_XB_SIG_INI, 0x00}, + {BRIDGE, M5602_XB_HSYNC_PARA, 0x00}, + {BRIDGE, M5602_XB_HSYNC_PARA, 0x00}, + {BRIDGE, M5602_XB_HSYNC_PARA, 0x02}, + {BRIDGE, M5602_XB_HSYNC_PARA, 0x7e}, + {BRIDGE, M5602_XB_SIG_INI, 0x00}, + /*end of sequence 5*/ + + /*sequence 6*/ + /* Changing 40 in f0 the image becomes green in bayer mode and red in + * rgb mode */ + {SENSOR, PO1030_REG_RED_GAIN, PO1030_RED_GAIN_DEFAULT}, + /* in changing 40 in f0 the image becomes green in bayer mode and red in + * rgb mode */ + {SENSOR, PO1030_REG_BLUE_GAIN, PO1030_BLUE_GAIN_DEFAULT}, + + /* with a very low lighted environment increase the exposure but + * decrease the FPS (Frame Per Second) */ + {BRIDGE, M5602_XB_SEN_CLK_DIV, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0}, + + /* Controls high exposure more than SENSOR_LOW_EXPOSURE, use only in + * low lighted environment (f0 is more than ff ?)*/ + {SENSOR, PO1030_REG_INTEGLINES_H, ((PO1030_EXPOSURE_DEFAULT >> 2) + & 0xff)}, + + /* Controls middle exposure, use only in high lighted environment */ + {SENSOR, PO1030_REG_INTEGLINES_M, PO1030_EXPOSURE_DEFAULT & 0xff}, + + /* Controls clarity (not sure) */ + {SENSOR, PO1030_REG_INTEGLINES_L, 0x00}, + /* Controls gain (the image is more lighted) */ + {SENSOR, PO1030_REG_GLOBALGAIN, PO1030_GLOBAL_GAIN_DEFAULT}, + + /* Sets the width */ + {SENSOR, PO1030_REG_FRAMEWIDTH_H, 0x02}, + {SENSOR, PO1030_REG_FRAMEWIDTH_L, 0xef} + /*end of sequence 6*/ +}; + +#endif diff --git a/drivers/media/video/gspca/m5602/m5602_s5k4aa.c b/drivers/media/video/gspca/m5602/m5602_s5k4aa.c new file mode 100644 index 0000000..3a2ae7a --- /dev/null +++ b/drivers/media/video/gspca/m5602/m5602_s5k4aa.c @@ -0,0 +1,460 @@ +/* + * Driver for the s5k4aa sensor + * + * Copyright (C) 2008 Erik Andren + * Copyright (C) 2007 Ilyes Gouta. Based on the m5603x Linux Driver Project. + * Copyright (C) 2005 m5603x Linux Driver Project + * + * Portions of code to USB interface and ALi driver software, + * Copyright (c) 2006 Willem Duinker + * v4l2 interface modeled after the V4L2 driver + * for SN9C10x PC Camera Controllers + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation, version 2. + * + */ + +#include "m5602_s5k4aa.h" + +int s5k4aa_probe(struct sd *sd) +{ + u8 prod_id[6] = {0x00, 0x00, 0x00, 0x00, 0x00, 0x00}; + const u8 expected_prod_id[6] = {0x00, 0x10, 0x00, 0x4b, 0x33, 0x75}; + int i, err = 0; + + if (force_sensor) { + if (force_sensor == S5K4AA_SENSOR) { + info("Forcing a %s sensor", s5k4aa.name); + goto sensor_found; + } + /* If we want to force another sensor, don't try to probe this + * one */ + return -ENODEV; + } + + info("Probing for a s5k4aa sensor"); + + /* Preinit the sensor */ + for (i = 0; i < ARRAY_SIZE(preinit_s5k4aa) && !err; i++) { + u8 data[2] = {0x00, 0x00}; + + switch (preinit_s5k4aa[i][0]) { + case BRIDGE: + err = m5602_write_bridge(sd, + preinit_s5k4aa[i][1], + preinit_s5k4aa[i][2]); + break; + + case SENSOR: + data[0] = preinit_s5k4aa[i][2]; + err = s5k4aa_write_sensor(sd, + preinit_s5k4aa[i][1], + data, 1); + break; + + case SENSOR_LONG: + data[0] = preinit_s5k4aa[i][2]; + data[1] = preinit_s5k4aa[i][3]; + err = s5k4aa_write_sensor(sd, + preinit_s5k4aa[i][1], + data, 2); + break; + default: + info("Invalid stream command, exiting init"); + return -EINVAL; + } + } + + /* Test some registers, but we don't know their exact meaning yet */ + if (s5k4aa_read_sensor(sd, 0x00, prod_id, sizeof(prod_id))) + return -ENODEV; + + if (memcmp(prod_id, expected_prod_id, sizeof(prod_id))) + return -ENODEV; + else + info("Detected a s5k4aa sensor"); +sensor_found: + sd->gspca_dev.cam.cam_mode = s5k4aa.modes; + sd->gspca_dev.cam.nmodes = s5k4aa.nmodes; + return 0; +} + +int s5k4aa_read_sensor(struct sd *sd, const u8 address, + u8 *i2c_data, const u8 len) +{ + int err, i; + + do { + err = m5602_read_bridge(sd, M5602_XB_I2C_STATUS, i2c_data); + } while ((*i2c_data & I2C_BUSY) && !err); + if (err < 0) + goto out; + + err = m5602_write_bridge(sd, M5602_XB_I2C_DEV_ADDR, + sd->sensor->i2c_slave_id); + if (err < 0) + goto out; + + err = m5602_write_bridge(sd, M5602_XB_I2C_REG_ADDR, address); + if (err < 0) + goto out; + + err = m5602_write_bridge(sd, M5602_XB_I2C_CTRL, 0x18 + len); + if (err < 0) + goto out; + + do { + err = m5602_read_bridge(sd, M5602_XB_I2C_STATUS, i2c_data); + } while ((*i2c_data & I2C_BUSY) && !err); + if (err < 0) + goto out; + + for (i = 0; (i < len) & !err; i++) { + err = m5602_read_bridge(sd, M5602_XB_I2C_DATA, &(i2c_data[i])); + + PDEBUG(DBG_TRACE, "Reading sensor register " + "0x%x containing 0x%x ", address, *i2c_data); + } +out: + return (err < 0) ? err : 0; +} + +int s5k4aa_write_sensor(struct sd *sd, const u8 address, + u8 *i2c_data, const u8 len) +{ + int err, i; + u8 *p; + struct usb_device *udev = sd->gspca_dev.dev; + __u8 *buf = sd->gspca_dev.usb_buf; + + /* No sensor with a data width larger than 16 bits has yet been seen */ + if (len > 2 || !len) + return -EINVAL; + + memcpy(buf, sensor_urb_skeleton, + sizeof(sensor_urb_skeleton)); + + buf[11] = sd->sensor->i2c_slave_id; + buf[15] = address; + + /* Special case larger sensor writes */ + p = buf + 16; + + /* Copy a four byte write sequence for each byte to be written to */ + for (i = 0; i < len; i++) { + memcpy(p, sensor_urb_skeleton + 16, 4); + p[3] = i2c_data[i]; + p += 4; + PDEBUG(DBG_TRACE, "Writing sensor register 0x%x with 0x%x", + address, i2c_data[i]); + } + + /* Copy the tailer */ + memcpy(p, sensor_urb_skeleton + 20, 4); + + /* Set the total length */ + p[3] = 0x10 + len; + + err = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), + 0x04, 0x40, 0x19, + 0x0000, buf, + 20 + len * 4, M5602_URB_MSG_TIMEOUT); + + return (err < 0) ? err : 0; +} + +int s5k4aa_init(struct sd *sd) +{ + int i, err = 0; + + for (i = 0; i < ARRAY_SIZE(init_s5k4aa) && !err; i++) { + u8 data[2] = {0x00, 0x00}; + + switch (init_s5k4aa[i][0]) { + case BRIDGE: + err = m5602_write_bridge(sd, + init_s5k4aa[i][1], + init_s5k4aa[i][2]); + break; + + case SENSOR: + data[0] = init_s5k4aa[i][2]; + err = s5k4aa_write_sensor(sd, + init_s5k4aa[i][1], data, 1); + break; + + case SENSOR_LONG: + data[0] = init_s5k4aa[i][2]; + data[1] = init_s5k4aa[i][3]; + err = s5k4aa_write_sensor(sd, + init_s5k4aa[i][1], data, 2); + break; + default: + info("Invalid stream command, exiting init"); + return -EINVAL; + } + } + + if (dump_sensor) + s5k4aa_dump_registers(sd); + + if (!err && dmi_check_system(s5k4aa_vflip_dmi_table)) { + u8 data = 0x02; + info("vertical flip quirk active"); + s5k4aa_write_sensor(sd, S5K4AA_PAGE_MAP, &data, 1); + s5k4aa_read_sensor(sd, S5K4AA_READ_MODE, &data, 1); + data |= S5K4AA_RM_V_FLIP; + data &= ~S5K4AA_RM_H_FLIP; + s5k4aa_write_sensor(sd, S5K4AA_READ_MODE, &data, 1); + + /* Decrement COLSTART to preserve color order (BGGR) */ + s5k4aa_read_sensor(sd, S5K4AA_COLSTART_LO, &data, 1); + data--; + s5k4aa_write_sensor(sd, S5K4AA_COLSTART_LO, &data, 1); + + /* Increment ROWSTART to preserve color order (BGGR) */ + s5k4aa_read_sensor(sd, S5K4AA_ROWSTART_LO, &data, 1); + data++; + s5k4aa_write_sensor(sd, S5K4AA_ROWSTART_LO, &data, 1); + } + + return (err < 0) ? err : 0; +} + +int s5k4aa_power_down(struct sd *sd) +{ + return 0; +} + +int s5k4aa_get_exposure(struct gspca_dev *gspca_dev, __s32 *val) +{ + struct sd *sd = (struct sd *) gspca_dev; + u8 data = S5K4AA_PAGE_MAP_2; + int err; + + err = s5k4aa_write_sensor(sd, S5K4AA_PAGE_MAP, &data, 1); + if (err < 0) + goto out; + + err = s5k4aa_read_sensor(sd, S5K4AA_EXPOSURE_HI, &data, 1); + if (err < 0) + goto out; + + *val = data << 8; + err = s5k4aa_read_sensor(sd, S5K4AA_EXPOSURE_LO, &data, 1); + *val |= data; + PDEBUG(DBG_V4L2_CID, "Read exposure %d", *val); +out: + return (err < 0) ? err : 0; +} + +int s5k4aa_set_exposure(struct gspca_dev *gspca_dev, __s32 val) +{ + struct sd *sd = (struct sd *) gspca_dev; + u8 data = S5K4AA_PAGE_MAP_2; + int err; + + PDEBUG(DBG_V4L2_CID, "Set exposure to %d", val); + err = s5k4aa_write_sensor(sd, S5K4AA_PAGE_MAP, &data, 1); + if (err < 0) + goto out; + data = (val >> 8) & 0xff; + err = s5k4aa_write_sensor(sd, S5K4AA_EXPOSURE_HI, &data, 1); + if (err < 0) + goto out; + data = val & 0xff; + err = s5k4aa_write_sensor(sd, S5K4AA_EXPOSURE_LO, &data, 1); +out: + return (err < 0) ? err : 0; +} + +int s5k4aa_get_vflip(struct gspca_dev *gspca_dev, __s32 *val) +{ + struct sd *sd = (struct sd *) gspca_dev; + u8 data = S5K4AA_PAGE_MAP_2; + int err; + + err = s5k4aa_write_sensor(sd, S5K4AA_PAGE_MAP, &data, 1); + if (err < 0) + goto out; + + err = s5k4aa_read_sensor(sd, S5K4AA_PAGE_MAP, &data, 1); + *val = (data & S5K4AA_RM_V_FLIP) >> 7; + PDEBUG(DBG_V4L2_CID, "Read vertical flip %d", *val); + +out: + return (err < 0) ? err : 0; +} + +int s5k4aa_set_vflip(struct gspca_dev *gspca_dev, __s32 val) +{ + struct sd *sd = (struct sd *) gspca_dev; + u8 data = S5K4AA_PAGE_MAP_2; + int err; + + PDEBUG(DBG_V4L2_CID, "Set vertical flip to %d", val); + err = s5k4aa_write_sensor(sd, S5K4AA_PAGE_MAP, &data, 1); + if (err < 0) + goto out; + err = s5k4aa_write_sensor(sd, S5K4AA_READ_MODE, &data, 1); + if (err < 0) + goto out; + data = ((data & ~S5K4AA_RM_V_FLIP) + | ((val & 0x01) << 7)); + err = s5k4aa_write_sensor(sd, S5K4AA_READ_MODE, &data, 1); + if (err < 0) + goto out; + + if (val) { + err = s5k4aa_read_sensor(sd, S5K4AA_ROWSTART_LO, &data, 1); + if (err < 0) + goto out; + + data++; + err = s5k4aa_write_sensor(sd, S5K4AA_ROWSTART_LO, &data, 1); + } else { + err = s5k4aa_read_sensor(sd, S5K4AA_ROWSTART_LO, &data, 1); + if (err < 0) + goto out; + + data--; + err = s5k4aa_write_sensor(sd, S5K4AA_ROWSTART_LO, &data, 1); + } +out: + return (err < 0) ? err : 0; +} + +int s5k4aa_get_hflip(struct gspca_dev *gspca_dev, __s32 *val) +{ + struct sd *sd = (struct sd *) gspca_dev; + u8 data = S5K4AA_PAGE_MAP_2; + int err; + + err = s5k4aa_write_sensor(sd, S5K4AA_PAGE_MAP, &data, 1); + if (err < 0) + goto out; + + err = s5k4aa_read_sensor(sd, S5K4AA_PAGE_MAP, &data, 1); + *val = (data & S5K4AA_RM_H_FLIP) >> 6; + PDEBUG(DBG_V4L2_CID, "Read horizontal flip %d", *val); +out: + return (err < 0) ? err : 0; +} + +int s5k4aa_set_hflip(struct gspca_dev *gspca_dev, __s32 val) +{ + struct sd *sd = (struct sd *) gspca_dev; + u8 data = S5K4AA_PAGE_MAP_2; + int err; + + PDEBUG(DBG_V4L2_CID, "Set horizontal flip to %d", + val); + err = s5k4aa_write_sensor(sd, S5K4AA_PAGE_MAP, &data, 1); + if (err < 0) + goto out; + err = s5k4aa_write_sensor(sd, S5K4AA_READ_MODE, &data, 1); + if (err < 0) + goto out; + + data = ((data & ~S5K4AA_RM_H_FLIP) | ((val & 0x01) << 6)); + err = s5k4aa_write_sensor(sd, S5K4AA_READ_MODE, &data, 1); + if (err < 0) + goto out; + + if (val) { + err = s5k4aa_read_sensor(sd, S5K4AA_COLSTART_LO, &data, 1); + if (err < 0) + goto out; + data++; + err = s5k4aa_write_sensor(sd, S5K4AA_COLSTART_LO, &data, 1); + if (err < 0) + goto out; + } else { + err = s5k4aa_read_sensor(sd, S5K4AA_COLSTART_LO, &data, 1); + if (err < 0) + goto out; + data--; + err = s5k4aa_write_sensor(sd, S5K4AA_COLSTART_LO, &data, 1); + } +out: + return (err < 0) ? err : 0; +} + +int s5k4aa_get_gain(struct gspca_dev *gspca_dev, __s32 *val) +{ + struct sd *sd = (struct sd *) gspca_dev; + u8 data = S5K4AA_PAGE_MAP_2; + int err; + + err = s5k4aa_write_sensor(sd, S5K4AA_PAGE_MAP, &data, 1); + if (err < 0) + goto out; + + err = s5k4aa_read_sensor(sd, S5K4AA_GAIN_2, &data, 1); + *val = data; + PDEBUG(DBG_V4L2_CID, "Read gain %d", *val); + +out: + return (err < 0) ? err : 0; +} + +int s5k4aa_set_gain(struct gspca_dev *gspca_dev, __s32 val) +{ + struct sd *sd = (struct sd *) gspca_dev; + u8 data = S5K4AA_PAGE_MAP_2; + int err; + + PDEBUG(DBG_V4L2_CID, "Set gain to %d", val); + err = s5k4aa_write_sensor(sd, S5K4AA_PAGE_MAP, &data, 1); + if (err < 0) + goto out; + + data = val & 0xff; + err = s5k4aa_write_sensor(sd, S5K4AA_GAIN_2, &data, 1); + +out: + return (err < 0) ? err : 0; +} + +void s5k4aa_dump_registers(struct sd *sd) +{ + int address; + u8 page, old_page; + s5k4aa_read_sensor(sd, S5K4AA_PAGE_MAP, &old_page, 1); + for (page = 0; page < 16; page++) { + s5k4aa_write_sensor(sd, S5K4AA_PAGE_MAP, &page, 1); + info("Dumping the s5k4aa register state for page 0x%x", page); + for (address = 0; address <= 0xff; address++) { + u8 value = 0; + s5k4aa_read_sensor(sd, address, &value, 1); + info("register 0x%x contains 0x%x", + address, value); + } + } + info("s5k4aa register state dump complete"); + + for (page = 0; page < 16; page++) { + s5k4aa_write_sensor(sd, S5K4AA_PAGE_MAP, &page, 1); + info("Probing for which registers that are " + "read/write for page 0x%x", page); + for (address = 0; address <= 0xff; address++) { + u8 old_value, ctrl_value, test_value = 0xff; + + s5k4aa_read_sensor(sd, address, &old_value, 1); + s5k4aa_write_sensor(sd, address, &test_value, 1); + s5k4aa_read_sensor(sd, address, &ctrl_value, 1); + + if (ctrl_value == test_value) + info("register 0x%x is writeable", address); + else + info("register 0x%x is read only", address); + + /* Restore original value */ + s5k4aa_write_sensor(sd, address, &old_value, 1); + } + } + info("Read/write register probing complete"); + s5k4aa_write_sensor(sd, S5K4AA_PAGE_MAP, &old_page, 1); +} diff --git a/drivers/media/video/gspca/m5602/m5602_s5k4aa.h b/drivers/media/video/gspca/m5602/m5602_s5k4aa.h new file mode 100644 index 0000000..1e4213a --- /dev/null +++ b/drivers/media/video/gspca/m5602/m5602_s5k4aa.h @@ -0,0 +1,368 @@ +/* + * Driver for the s5k4aa sensor + * + * Copyright (C) 2008 Erik Andren + * Copyright (C) 2007 Ilyes Gouta. Based on the m5603x Linux Driver Project. + * Copyright (C) 2005 m5603x Linux Driver Project + * + * Portions of code to USB interface and ALi driver software, + * Copyright (c) 2006 Willem Duinker + * v4l2 interface modeled after the V4L2 driver + * for SN9C10x PC Camera Controllers + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation, version 2. + * + */ + +#ifndef M5602_S5K4AA_H_ +#define M5602_S5K4AA_H_ + +#include + +#include "m5602_sensor.h" + +/*****************************************************************************/ + +#define S5K4AA_PAGE_MAP 0xec + +#define S5K4AA_PAGE_MAP_0 0x00 +#define S5K4AA_PAGE_MAP_1 0x01 +#define S5K4AA_PAGE_MAP_2 0x02 + +/* Sensor register definitions for page 0x02 */ +#define S5K4AA_READ_MODE 0x03 +#define S5K4AA_ROWSTART_HI 0x04 +#define S5K4AA_ROWSTART_LO 0x05 +#define S5K4AA_COLSTART_HI 0x06 +#define S5K4AA_COLSTART_LO 0x07 +#define S5K4AA_WINDOW_HEIGHT_HI 0x08 +#define S5K4AA_WINDOW_HEIGHT_LO 0x09 +#define S5K4AA_WINDOW_WIDTH_HI 0x0a +#define S5K4AA_WINDOW_WIDTH_LO 0x0b +#define S5K4AA_GLOBAL_GAIN__ 0x0f /* Only a guess ATM !!! */ +#define S5K4AA_H_BLANK_HI__ 0x1d /* Only a guess ATM !!! sync lost + if too low, reduces frame rate + if too high */ +#define S5K4AA_H_BLANK_LO__ 0x1e /* Only a guess ATM !!! */ +#define S5K4AA_EXPOSURE_HI 0x17 +#define S5K4AA_EXPOSURE_LO 0x18 +#define S5K4AA_GAIN_1 0x1f /* (digital?) gain : 5 bits */ +#define S5K4AA_GAIN_2 0x20 /* (analogue?) gain : 7 bits */ + +#define S5K4AA_RM_ROW_SKIP_4X 0x08 +#define S5K4AA_RM_ROW_SKIP_2X 0x04 +#define S5K4AA_RM_COL_SKIP_4X 0x02 +#define S5K4AA_RM_COL_SKIP_2X 0x01 +#define S5K4AA_RM_H_FLIP 0x40 +#define S5K4AA_RM_V_FLIP 0x80 + +/*****************************************************************************/ + +/* Kernel module parameters */ +extern int force_sensor; +extern int dump_sensor; +extern unsigned int m5602_debug; + +int s5k4aa_probe(struct sd *sd); +int s5k4aa_init(struct sd *sd); +int s5k4aa_power_down(struct sd *sd); + +void s5k4aa_dump_registers(struct sd *sd); + +int s5k4aa_read_sensor(struct sd *sd, const u8 address, + u8 *i2c_data, const u8 len); +int s5k4aa_write_sensor(struct sd *sd, const u8 address, + u8 *i2c_data, const u8 len); + +int s5k4aa_get_exposure(struct gspca_dev *gspca_dev, __s32 *val); +int s5k4aa_set_exposure(struct gspca_dev *gspca_dev, __s32 val); +int s5k4aa_get_vflip(struct gspca_dev *gspca_dev, __s32 *val); +int s5k4aa_set_vflip(struct gspca_dev *gspca_dev, __s32 val); +int s5k4aa_get_hflip(struct gspca_dev *gspca_dev, __s32 *val); +int s5k4aa_set_hflip(struct gspca_dev *gspca_dev, __s32 val); +int s5k4aa_get_gain(struct gspca_dev *gspca_dev, __s32 *val); +int s5k4aa_set_gain(struct gspca_dev *gspca_dev, __s32 val); + +static struct m5602_sensor s5k4aa = { + .name = "S5K4AA", + .probe = s5k4aa_probe, + .init = s5k4aa_init, + .power_down = s5k4aa_power_down, + .read_sensor = s5k4aa_read_sensor, + .write_sensor = s5k4aa_write_sensor, + .i2c_slave_id = 0x5a, + .nctrls = 4, + .ctrls = { + { + { + .id = V4L2_CID_VFLIP, + .type = V4L2_CTRL_TYPE_BOOLEAN, + .name = "vertical flip", + .minimum = 0, + .maximum = 1, + .step = 1, + .default_value = 0 + }, + .set = s5k4aa_set_vflip, + .get = s5k4aa_get_vflip + + }, { + { + .id = V4L2_CID_HFLIP, + .type = V4L2_CTRL_TYPE_BOOLEAN, + .name = "horizontal flip", + .minimum = 0, + .maximum = 1, + .step = 1, + .default_value = 0 + }, + .set = s5k4aa_set_hflip, + .get = s5k4aa_get_hflip + + }, { + { + .id = V4L2_CID_GAIN, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "Gain", + .minimum = 0, + .maximum = 127, + .step = 1, + .default_value = 0xa0, + .flags = V4L2_CTRL_FLAG_SLIDER + }, + .set = s5k4aa_set_gain, + .get = s5k4aa_get_gain + }, { + { + .id = V4L2_CID_EXPOSURE, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "Exposure", + .minimum = 13, + .maximum = 0xfff, + .step = 1, + .default_value = 0x100, + .flags = V4L2_CTRL_FLAG_SLIDER + }, + .set = s5k4aa_set_exposure, + .get = s5k4aa_get_exposure + } + }, + + .nmodes = 1, + .modes = { + { + M5602_DEFAULT_FRAME_WIDTH, + M5602_DEFAULT_FRAME_HEIGHT, + V4L2_PIX_FMT_SBGGR8, + V4L2_FIELD_NONE, + .sizeimage = + M5602_DEFAULT_FRAME_WIDTH * M5602_DEFAULT_FRAME_HEIGHT, + .bytesperline = M5602_DEFAULT_FRAME_WIDTH, + .colorspace = V4L2_COLORSPACE_SRGB, + .priv = 1 + } + } +}; + +static const unsigned char preinit_s5k4aa[][4] = +{ + {BRIDGE, M5602_XB_MCU_CLK_DIV, 0x02, 0x00}, + {BRIDGE, M5602_XB_MCU_CLK_CTRL, 0xb0, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_DIV, 0x00, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0, 0x00}, + {BRIDGE, M5602_XB_ADC_CTRL, 0xc0, 0x00}, + {BRIDGE, M5602_XB_SENSOR_TYPE, 0x0d, 0x00}, + {BRIDGE, M5602_XB_SENSOR_CTRL, 0x00, 0x00}, + + {BRIDGE, M5602_XB_GPIO_DIR, 0x1d, 0x00}, + {BRIDGE, M5602_XB_GPIO_DAT, 0x08, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_DIV, 0xb0, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0x80, 0x00}, + {BRIDGE, M5602_XB_GPIO_EN_H, 0x3f, 0x00}, + {BRIDGE, M5602_XB_GPIO_DIR_H, 0x3f, 0x00}, + {BRIDGE, M5602_XB_GPIO_DAT_H, 0x00, 0x00}, + {BRIDGE, M5602_XB_GPIO_DIR, 0x1d, 0x00}, + {BRIDGE, M5602_XB_GPIO_DAT, 0x00, 0x00}, + {BRIDGE, M5602_XB_GPIO_EN_L, 0xff, 0x00}, + {BRIDGE, M5602_XB_GPIO_DIR_L, 0xff, 0x00}, + {BRIDGE, M5602_XB_GPIO_DAT_L, 0x00, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_DIV, 0x00, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0, 0x00}, + {BRIDGE, M5602_XB_ADC_CTRL, 0xc0, 0x00}, + {BRIDGE, M5602_XB_SENSOR_TYPE, 0x08, 0x00}, + + {BRIDGE, M5602_XB_MCU_CLK_DIV, 0x02, 0x00}, + {BRIDGE, M5602_XB_MCU_CLK_CTRL, 0xb0, 0x00}, + {BRIDGE, M5602_XB_GPIO_DIR, 0x1d, 0x00}, + {BRIDGE, M5602_XB_GPIO_DAT, 0x14, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_DIV, 0x00, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xf0, 0x00}, + {BRIDGE, M5602_XB_GPIO_DIR, 0x1d, 0x00}, + {BRIDGE, M5602_XB_GPIO_DAT, 0x1c, 0x00}, + {BRIDGE, M5602_XB_GPIO_EN_H, 0x06, 0x00}, + {BRIDGE, M5602_XB_GPIO_DIR_H, 0x06, 0x00}, + {BRIDGE, M5602_XB_GPIO_DAT_H, 0x00, 0x00}, + {BRIDGE, M5602_XB_GPIO_EN_L, 0x00, 0x00}, + {BRIDGE, M5602_XB_I2C_CLK_DIV, 0x20, 0x00}, + + {SENSOR, S5K4AA_PAGE_MAP, 0x00, 0x00} +}; + +static const unsigned char init_s5k4aa[][4] = +{ + {BRIDGE, M5602_XB_MCU_CLK_DIV, 0x02, 0x00}, + {BRIDGE, M5602_XB_MCU_CLK_CTRL, 0xb0, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_DIV, 0x00, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0, 0x00}, + {BRIDGE, M5602_XB_ADC_CTRL, 0xc0, 0x00}, + {BRIDGE, M5602_XB_SENSOR_TYPE, 0x0d, 0x00}, + {BRIDGE, M5602_XB_SENSOR_CTRL, 0x00, 0x00}, + + {BRIDGE, M5602_XB_GPIO_DIR, 0x1d, 0x00}, + {BRIDGE, M5602_XB_GPIO_DAT, 0x08, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_DIV, 0xb0, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0x80, 0x00}, + {BRIDGE, M5602_XB_GPIO_EN_H, 0x3f, 0x00}, + {BRIDGE, M5602_XB_GPIO_DIR_H, 0x3f, 0x00}, + {BRIDGE, M5602_XB_GPIO_DAT_H, 0x00, 0x00}, + {BRIDGE, M5602_XB_GPIO_DIR, 0x1d, 0x00}, + {BRIDGE, M5602_XB_GPIO_DAT, 0x00, 0x00}, + {BRIDGE, M5602_XB_GPIO_EN_L, 0xff, 0x00}, + {BRIDGE, M5602_XB_GPIO_DIR_L, 0xff, 0x00}, + {BRIDGE, M5602_XB_GPIO_DAT_L, 0x00, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_DIV, 0x00, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0, 0x00}, + {BRIDGE, M5602_XB_ADC_CTRL, 0xc0, 0x00}, + {BRIDGE, M5602_XB_SENSOR_TYPE, 0x08, 0x00}, + + {BRIDGE, M5602_XB_MCU_CLK_DIV, 0x02, 0x00}, + {BRIDGE, M5602_XB_MCU_CLK_CTRL, 0xb0, 0x00}, + {BRIDGE, M5602_XB_GPIO_DIR, 0x1d, 0x00}, + {BRIDGE, M5602_XB_GPIO_DAT, 0x14, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_DIV, 0x00, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xf0, 0x00}, + {BRIDGE, M5602_XB_GPIO_DIR, 0x1d, 0x00}, + {BRIDGE, M5602_XB_GPIO_DAT, 0x1c, 0x00}, + {BRIDGE, M5602_XB_GPIO_EN_H, 0x06, 0x00}, + {BRIDGE, M5602_XB_GPIO_DIR_H, 0x06, 0x00}, + {BRIDGE, M5602_XB_GPIO_DAT_H, 0x00, 0x00}, + {BRIDGE, M5602_XB_GPIO_EN_L, 0x00, 0x00}, + {BRIDGE, M5602_XB_I2C_CLK_DIV, 0x20, 0x00}, + + {SENSOR, S5K4AA_PAGE_MAP, 0x07, 0x00}, + {SENSOR, 0x36, 0x01, 0x00}, + {SENSOR, S5K4AA_PAGE_MAP, 0x00, 0x00}, + {SENSOR, 0x7b, 0xff, 0x00}, + {SENSOR, S5K4AA_PAGE_MAP, 0x02, 0x00}, + {SENSOR, 0x0c, 0x05, 0x00}, + {SENSOR, 0x02, 0x0e, 0x00}, + {SENSOR, S5K4AA_GAIN_1, 0x0f, 0x00}, + {SENSOR, S5K4AA_GAIN_2, 0x00, 0x00}, + {SENSOR, S5K4AA_GLOBAL_GAIN__, 0x01, 0x00}, + {SENSOR, 0x11, 0x00, 0x00}, + {SENSOR, 0x12, 0x00, 0x00}, + {SENSOR, S5K4AA_PAGE_MAP, 0x02, 0x00}, + {SENSOR, S5K4AA_READ_MODE, 0xa0, 0x00}, + {SENSOR, 0x37, 0x00, 0x00}, + {SENSOR, S5K4AA_ROWSTART_HI, 0x00, 0x00}, + {SENSOR, S5K4AA_ROWSTART_LO, 0x2a, 0x00}, + {SENSOR, S5K4AA_COLSTART_HI, 0x00, 0x00}, + {SENSOR, S5K4AA_COLSTART_LO, 0x0b, 0x00}, + {SENSOR, S5K4AA_WINDOW_HEIGHT_HI, 0x03, 0x00}, + {SENSOR, S5K4AA_WINDOW_HEIGHT_LO, 0xc4, 0x00}, + {SENSOR, S5K4AA_WINDOW_WIDTH_HI, 0x05, 0x00}, + {SENSOR, S5K4AA_WINDOW_WIDTH_LO, 0x08, 0x00}, + {SENSOR, S5K4AA_H_BLANK_HI__, 0x00, 0x00}, + {SENSOR, S5K4AA_H_BLANK_LO__, 0x48, 0x00}, + {SENSOR, S5K4AA_EXPOSURE_HI, 0x00, 0x00}, + {SENSOR, S5K4AA_EXPOSURE_LO, 0x43, 0x00}, + {SENSOR, 0x11, 0x04, 0x00}, + {SENSOR, 0x12, 0xc3, 0x00}, + {SENSOR, S5K4AA_PAGE_MAP, 0x02, 0x00}, + + {BRIDGE, M5602_XB_SEN_CLK_DIV, 0x06, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0, 0x00}, + {BRIDGE, M5602_XB_ADC_CTRL, 0xc0, 0x00}, + {BRIDGE, M5602_XB_SENSOR_TYPE, 0x08, 0x00}, + {BRIDGE, M5602_XB_LINE_OF_FRAME_H, 0x81, 0x00}, + {BRIDGE, M5602_XB_PIX_OF_LINE_H, 0x82, 0x00}, + {BRIDGE, M5602_XB_SIG_INI, 0x01, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00}, + /* VSYNC_PARA, VSYNC_PARA : img height 480 = 0x01e0 */ + {BRIDGE, M5602_XB_VSYNC_PARA, 0x01, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0xe0, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00}, + {BRIDGE, M5602_XB_SIG_INI, 0x00, 0x00}, + {BRIDGE, M5602_XB_SIG_INI, 0x02, 0x00}, + {BRIDGE, M5602_XB_HSYNC_PARA, 0x00, 0x00}, + {BRIDGE, M5602_XB_HSYNC_PARA, 0x00, 0x00}, + /* HSYNC_PARA, HSYNC_PARA : img width 640 = 0x0280 */ + {BRIDGE, M5602_XB_HSYNC_PARA, 0x02, 0x00}, + {BRIDGE, M5602_XB_HSYNC_PARA, 0x80, 0x00}, + {BRIDGE, M5602_XB_SIG_INI, 0x00, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_DIV, 0x00, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xa0, 0x00}, /* 48 MHz */ + + {SENSOR, S5K4AA_PAGE_MAP, 0x02, 0x00}, + {SENSOR, S5K4AA_READ_MODE, S5K4AA_RM_H_FLIP | S5K4AA_RM_ROW_SKIP_2X + | S5K4AA_RM_COL_SKIP_2X, 0x00}, + /* 0x37 : Fix image stability when light is too bright and improves + * image quality in 640x480, but worsens it in 1280x1024 */ + {SENSOR, 0x37, 0x01, 0x00}, + /* ROWSTART_HI, ROWSTART_LO : 10 + (1024-960)/2 = 42 = 0x002a */ + {SENSOR, S5K4AA_ROWSTART_HI, 0x00, 0x00}, + {SENSOR, S5K4AA_ROWSTART_LO, 0x2a, 0x00}, + {SENSOR, S5K4AA_COLSTART_HI, 0x00, 0x00}, + {SENSOR, S5K4AA_COLSTART_LO, 0x0c, 0x00}, + /* window_height_hi, window_height_lo : 960 = 0x03c0 */ + {SENSOR, S5K4AA_WINDOW_HEIGHT_HI, 0x03, 0x00}, + {SENSOR, S5K4AA_WINDOW_HEIGHT_LO, 0xc0, 0x00}, + /* window_width_hi, window_width_lo : 1280 = 0x0500 */ + {SENSOR, S5K4AA_WINDOW_WIDTH_HI, 0x05, 0x00}, + {SENSOR, S5K4AA_WINDOW_WIDTH_LO, 0x00, 0x00}, + {SENSOR, S5K4AA_H_BLANK_HI__, 0x00, 0x00}, + {SENSOR, S5K4AA_H_BLANK_LO__, 0xa8, 0x00}, /* helps to sync... */ + {SENSOR, S5K4AA_EXPOSURE_HI, 0x01, 0x00}, + {SENSOR, S5K4AA_EXPOSURE_LO, 0x00, 0x00}, + {SENSOR, 0x11, 0x04, 0x00}, + {SENSOR, 0x12, 0xc3, 0x00}, + {SENSOR, S5K4AA_PAGE_MAP, 0x02, 0x00}, + {SENSOR, 0x02, 0x0e, 0x00}, + {SENSOR_LONG, S5K4AA_GLOBAL_GAIN__, 0x0f, 0x00}, + {SENSOR, S5K4AA_GAIN_1, 0x0b, 0x00}, + {SENSOR, S5K4AA_GAIN_2, 0xa0, 0x00} +}; + +static const struct dmi_system_id s5k4aa_vflip_dmi_table[] = { + { + .ident = "Fujitsu-Siemens Amilo Xa 2528", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"), + DMI_MATCH(DMI_PRODUCT_NAME, "AMILO Xa 2528") + } + }, + { + .ident = "Fujitsu-Siemens Amilo Xi 2550", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"), + DMI_MATCH(DMI_PRODUCT_NAME, "AMILO Xi 2550") + } + }, + { + .ident = "MSI GX700", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Micro-Star International"), + DMI_MATCH(DMI_PRODUCT_NAME, "GX700"), + DMI_MATCH(DMI_BIOS_DATE, "07/26/2007") + } + }, + { } +}; + +#endif diff --git a/drivers/media/video/gspca/m5602/m5602_s5k83a.c b/drivers/media/video/gspca/m5602/m5602_s5k83a.c new file mode 100644 index 0000000..a4d6a81 --- /dev/null +++ b/drivers/media/video/gspca/m5602/m5602_s5k83a.c @@ -0,0 +1,331 @@ +/* + * Driver for the s5k83a sensor + * + * Copyright (C) 2008 Erik Andren + * Copyright (C) 2007 Ilyes Gouta. Based on the m5603x Linux Driver Project. + * Copyright (C) 2005 m5603x Linux Driver Project + * + * Portions of code to USB interface and ALi driver software, + * Copyright (c) 2006 Willem Duinker + * v4l2 interface modeled after the V4L2 driver + * for SN9C10x PC Camera Controllers + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation, version 2. + * + */ + +#include "m5602_s5k83a.h" + +int s5k83a_probe(struct sd *sd) +{ + u8 prod_id = 0, ver_id = 0; + int i, err = 0; + + if (force_sensor) { + if (force_sensor == S5K83A_SENSOR) { + info("Forcing a %s sensor", s5k83a.name); + goto sensor_found; + } + /* If we want to force another sensor, don't try to probe this + * one */ + return -ENODEV; + } + + info("Probing for a s5k83a sensor"); + + /* Preinit the sensor */ + for (i = 0; i < ARRAY_SIZE(preinit_s5k83a) && !err; i++) { + u8 data[2] = {preinit_s5k83a[i][2], preinit_s5k83a[i][3]}; + if (preinit_s5k83a[i][0] == SENSOR) + err = s5k83a_write_sensor(sd, preinit_s5k83a[i][1], + data, 2); + else + err = m5602_write_bridge(sd, preinit_s5k83a[i][1], + data[0]); + } + + /* We don't know what register (if any) that contain the product id + * Just pick the first addresses that seem to produce the same results + * on multiple machines */ + if (s5k83a_read_sensor(sd, 0x00, &prod_id, 1)) + return -ENODEV; + + if (s5k83a_read_sensor(sd, 0x01, &ver_id, 1)) + return -ENODEV; + + if ((prod_id == 0xff) || (ver_id == 0xff)) + return -ENODEV; + else + info("Detected a s5k83a sensor"); + +sensor_found: + sd->gspca_dev.cam.cam_mode = s5k83a.modes; + sd->gspca_dev.cam.nmodes = s5k83a.nmodes; + return 0; +} + +int s5k83a_read_sensor(struct sd *sd, const u8 address, + u8 *i2c_data, const u8 len) +{ + int err, i; + + do { + err = m5602_read_bridge(sd, M5602_XB_I2C_STATUS, i2c_data); + } while ((*i2c_data & I2C_BUSY) && !err); + if (err < 0) + goto out; + + err = m5602_write_bridge(sd, M5602_XB_I2C_DEV_ADDR, + sd->sensor->i2c_slave_id); + if (err < 0) + goto out; + + err = m5602_write_bridge(sd, M5602_XB_I2C_REG_ADDR, address); + if (err < 0) + goto out; + + err = m5602_write_bridge(sd, M5602_XB_I2C_CTRL, 0x18 + len); + if (err < 0) + goto out; + + do { + err = m5602_read_bridge(sd, M5602_XB_I2C_STATUS, i2c_data); + } while ((*i2c_data & I2C_BUSY) && !err); + + if (err < 0) + goto out; + for (i = 0; i < len && !len; i++) { + err = m5602_read_bridge(sd, M5602_XB_I2C_DATA, &(i2c_data[i])); + + PDEBUG(DBG_TRACE, "Reading sensor register " + "0x%x containing 0x%x ", address, *i2c_data); + } + +out: + return (err < 0) ? err : 0; +} + +int s5k83a_write_sensor(struct sd *sd, const u8 address, + u8 *i2c_data, const u8 len) +{ + int err, i; + u8 *p; + struct usb_device *udev = sd->gspca_dev.dev; + __u8 *buf = sd->gspca_dev.usb_buf; + + /* No sensor with a data width larger than 16 bits has yet been seen */ + if (len > 2 || !len) + return -EINVAL; + + memcpy(buf, sensor_urb_skeleton, + sizeof(sensor_urb_skeleton)); + + buf[11] = sd->sensor->i2c_slave_id; + buf[15] = address; + + /* Special case larger sensor writes */ + p = buf + 16; + + /* Copy a four byte write sequence for each byte to be written to */ + for (i = 0; i < len; i++) { + memcpy(p, sensor_urb_skeleton + 16, 4); + p[3] = i2c_data[i]; + p += 4; + PDEBUG(DBG_TRACE, "Writing sensor register 0x%x with 0x%x", + address, i2c_data[i]); + } + + /* Copy the tailer */ + memcpy(p, sensor_urb_skeleton + 20, 4); + + /* Set the total length */ + p[3] = 0x10 + len; + + err = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), + 0x04, 0x40, 0x19, + 0x0000, buf, + 20 + len * 4, M5602_URB_MSG_TIMEOUT); + + return (err < 0) ? err : 0; +} + +int s5k83a_init(struct sd *sd) +{ + int i, err = 0; + + for (i = 0; i < ARRAY_SIZE(init_s5k83a) && !err; i++) { + u8 data[2] = {0x00, 0x00}; + + switch (init_s5k83a[i][0]) { + case BRIDGE: + err = m5602_write_bridge(sd, + init_s5k83a[i][1], + init_s5k83a[i][2]); + break; + + case SENSOR: + data[0] = init_s5k83a[i][2]; + err = s5k83a_write_sensor(sd, + init_s5k83a[i][1], data, 1); + break; + + case SENSOR_LONG: + data[0] = init_s5k83a[i][2]; + data[1] = init_s5k83a[i][3]; + err = s5k83a_write_sensor(sd, + init_s5k83a[i][1], data, 2); + break; + default: + info("Invalid stream command, exiting init"); + return -EINVAL; + } + } + + if (dump_sensor) + s5k83a_dump_registers(sd); + + return (err < 0) ? err : 0; +} + +int s5k83a_power_down(struct sd *sd) +{ + return 0; +} + +void s5k83a_dump_registers(struct sd *sd) +{ + int address; + u8 page, old_page; + s5k83a_read_sensor(sd, S5K83A_PAGE_MAP, &old_page, 1); + + for (page = 0; page < 16; page++) { + s5k83a_write_sensor(sd, S5K83A_PAGE_MAP, &page, 1); + info("Dumping the s5k83a register state for page 0x%x", page); + for (address = 0; address <= 0xff; address++) { + u8 val = 0; + s5k83a_read_sensor(sd, address, &val, 1); + info("register 0x%x contains 0x%x", + address, val); + } + } + info("s5k83a register state dump complete"); + + for (page = 0; page < 16; page++) { + s5k83a_write_sensor(sd, S5K83A_PAGE_MAP, &page, 1); + info("Probing for which registers that are read/write " + "for page 0x%x", page); + for (address = 0; address <= 0xff; address++) { + u8 old_val, ctrl_val, test_val = 0xff; + + s5k83a_read_sensor(sd, address, &old_val, 1); + s5k83a_write_sensor(sd, address, &test_val, 1); + s5k83a_read_sensor(sd, address, &ctrl_val, 1); + + if (ctrl_val == test_val) + info("register 0x%x is writeable", address); + else + info("register 0x%x is read only", address); + + /* Restore original val */ + s5k83a_write_sensor(sd, address, &old_val, 1); + } + } + info("Read/write register probing complete"); + s5k83a_write_sensor(sd, S5K83A_PAGE_MAP, &old_page, 1); +} + +int s5k83a_get_brightness(struct gspca_dev *gspca_dev, __s32 *val) +{ + int err; + u8 data[2]; + struct sd *sd = (struct sd *) gspca_dev; + + err = s5k83a_read_sensor(sd, S5K83A_BRIGHTNESS, data, 2); + data[1] = data[1] << 1; + *val = data[1]; + + return (err < 0) ? err : 0; +} + +int s5k83a_set_brightness(struct gspca_dev *gspca_dev, __s32 val) +{ + int err; + u8 data[2]; + struct sd *sd = (struct sd *) gspca_dev; + + data[0] = 0x00; + data[1] = 0x20; + err = s5k83a_write_sensor(sd, 0x14, data, 2); + if (err < 0) + return err; + + data[0] = 0x01; + data[1] = 0x00; + err = s5k83a_write_sensor(sd, 0x0d, data, 2); + if (err < 0) + return err; + + /* FIXME: This is not sane, we need to figure out the composition + of these registers */ + data[0] = val >> 3; /* brightness, high 5 bits */ + data[1] = val >> 1; /* brightness, high 7 bits */ + err = s5k83a_write_sensor(sd, S5K83A_BRIGHTNESS, data, 2); + + return (err < 0) ? err : 0; +} + +int s5k83a_get_whiteness(struct gspca_dev *gspca_dev, __s32 *val) +{ + int err; + u8 data; + struct sd *sd = (struct sd *) gspca_dev; + + err = s5k83a_read_sensor(sd, S5K83A_WHITENESS, &data, 1); + + *val = data; + return (err < 0) ? err : 0; +} + +int s5k83a_set_whiteness(struct gspca_dev *gspca_dev, __s32 val) +{ + int err; + u8 data[1]; + struct sd *sd = (struct sd *) gspca_dev; + + data[0] = val; + err = s5k83a_write_sensor(sd, S5K83A_WHITENESS, data, 1); + + return (err < 0) ? err : 0; +} + +int s5k83a_get_gain(struct gspca_dev *gspca_dev, __s32 *val) +{ + int err; + u8 data[2]; + struct sd *sd = (struct sd *) gspca_dev; + + err = s5k83a_read_sensor(sd, S5K83A_GAIN, data, 2); + + data[1] = data[1] & 0x3f; + if (data[1] > S5K83A_MAXIMUM_GAIN) + data[1] = S5K83A_MAXIMUM_GAIN; + + *val = data[1]; + + return (err < 0) ? err : 0; +} + +int s5k83a_set_gain(struct gspca_dev *gspca_dev, __s32 val) +{ + int err = 0; + u8 data[2]; + struct sd *sd = (struct sd *) gspca_dev; + + data[0] = 0; + data[1] = val; + err = s5k83a_write_sensor(sd, S5K83A_GAIN, data, 2); + + return (err < 0) ? err : 0; +} diff --git a/drivers/media/video/gspca/m5602/m5602_s5k83a.h b/drivers/media/video/gspca/m5602/m5602_s5k83a.h new file mode 100644 index 0000000..a57f623 --- /dev/null +++ b/drivers/media/video/gspca/m5602/m5602_s5k83a.h @@ -0,0 +1,444 @@ +/* + * Driver for the s5k83a sensor + * + * Copyright (C) 2008 Erik Andren + * Copyright (C) 2007 Ilyes Gouta. Based on the m5603x Linux Driver Project. + * Copyright (C) 2005 m5603x Linux Driver Project + * + * Portions of code to USB interface and ALi driver software, + * Copyright (c) 2006 Willem Duinker + * v4l2 interface modeled after the V4L2 driver + * for SN9C10x PC Camera Controllers + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation, version 2. + * + */ + +#ifndef M5602_S5K83A_H_ +#define M5602_S5K83A_H_ + +#include "m5602_sensor.h" + +#define S5K83A_PAGE_MAP 0xec +#define S5K83A_GAIN 0x18 +#define S5K83A_WHITENESS 0x0a +#define S5K83A_BRIGHTNESS 0x1b + +#define S5K83A_DEFAULT_BRIGHTNESS 0x71 +#define S5K83A_DEFAULT_WHITENESS 0x7e +#define S5K83A_DEFAULT_GAIN 0x00 +#define S5K83A_MAXIMUM_GAIN 0x3c + +/*****************************************************************************/ + +/* Kernel module parameters */ +extern int force_sensor; +extern int dump_sensor; +extern unsigned int m5602_debug; + + +int s5k83a_probe(struct sd *sd); +int s5k83a_init(struct sd *sd); +int s5k83a_power_down(struct sd *sd); + +void s5k83a_dump_registers(struct sd *sd); + +int s5k83a_read_sensor(struct sd *sd, const u8 address, + u8 *i2c_data, const u8 len); +int s5k83a_write_sensor(struct sd *sd, const u8 address, + u8 *i2c_data, const u8 len); + +int s5k83a_set_brightness(struct gspca_dev *gspca_dev, __s32 val); +int s5k83a_get_brightness(struct gspca_dev *gspca_dev, __s32 *val); +int s5k83a_set_whiteness(struct gspca_dev *gspca_dev, __s32 val); +int s5k83a_get_whiteness(struct gspca_dev *gspca_dev, __s32 *val); +int s5k83a_set_gain(struct gspca_dev *gspca_dev, __s32 val); +int s5k83a_get_gain(struct gspca_dev *gspca_dev, __s32 *val); + +static struct m5602_sensor s5k83a = { + .name = "S5K83A", + .probe = s5k83a_probe, + .init = s5k83a_init, + .power_down = s5k83a_power_down, + .read_sensor = s5k83a_read_sensor, + .write_sensor = s5k83a_write_sensor, + .i2c_slave_id = 0x5a, + .nctrls = 3, + .ctrls = { + { + { + .id = V4L2_CID_BRIGHTNESS, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "brightness", + .minimum = 0x00, + .maximum = 0xff, + .step = 0x01, + .default_value = S5K83A_DEFAULT_BRIGHTNESS, + .flags = V4L2_CTRL_FLAG_SLIDER + }, + .set = s5k83a_set_brightness, + .get = s5k83a_get_brightness + + }, { + { + .id = V4L2_CID_WHITENESS, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "whiteness", + .minimum = 0x00, + .maximum = 0xff, + .step = 0x01, + .default_value = S5K83A_DEFAULT_WHITENESS, + .flags = V4L2_CTRL_FLAG_SLIDER + }, + .set = s5k83a_set_whiteness, + .get = s5k83a_get_whiteness, + }, { + { + .id = V4L2_CID_GAIN, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "gain", + .minimum = 0x00, + .maximum = S5K83A_MAXIMUM_GAIN, + .step = 0x01, + .default_value = S5K83A_DEFAULT_GAIN, + .flags = V4L2_CTRL_FLAG_SLIDER + }, + .set = s5k83a_set_gain, + .get = s5k83a_get_gain + } + }, + .nmodes = 1, + .modes = { + { + M5602_DEFAULT_FRAME_WIDTH, + M5602_DEFAULT_FRAME_HEIGHT, + V4L2_PIX_FMT_SBGGR8, + V4L2_FIELD_NONE, + .sizeimage = + M5602_DEFAULT_FRAME_WIDTH * M5602_DEFAULT_FRAME_HEIGHT, + .bytesperline = M5602_DEFAULT_FRAME_WIDTH, + .colorspace = V4L2_COLORSPACE_SRGB, + .priv = 1 + + } + } +}; + +static const unsigned char preinit_s5k83a[][4] = +{ + {BRIDGE, M5602_XB_MCU_CLK_DIV, 0x02, 0x00}, + {BRIDGE, M5602_XB_MCU_CLK_CTRL, 0xb0, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_DIV, 0x00, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0, 0x00}, + {BRIDGE, M5602_XB_ADC_CTRL, 0xc0, 0x00}, + {BRIDGE, M5602_XB_SENSOR_TYPE, 0x0d, 0x00}, + {BRIDGE, M5602_XB_SENSOR_CTRL, 0x00, 0x00}, + + {BRIDGE, M5602_XB_SIG_INI, 0x00, 0x00}, + {BRIDGE, M5602_XB_GPIO_DIR, 0x1d, 0x00}, + {BRIDGE, M5602_XB_GPIO_DAT, 0x08, 0x00}, + {BRIDGE, M5602_XB_GPIO_EN_H, 0x3f, 0x00}, + {BRIDGE, M5602_XB_GPIO_DIR_H, 0x3f, 0x00}, + {BRIDGE, M5602_XB_GPIO_DAT_H, 0x00, 0x00}, + {BRIDGE, M5602_XB_GPIO_EN_L, 0xff, 0x00}, + {BRIDGE, M5602_XB_GPIO_DIR_L, 0xff, 0x00}, + {BRIDGE, M5602_XB_GPIO_DAT_L, 0x00, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_DIV, 0xb0, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0x80, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_DIV, 0x00, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0, 0x00}, + {BRIDGE, M5602_XB_ADC_CTRL, 0xc0, 0x00}, + {BRIDGE, M5602_XB_SENSOR_TYPE, 0x09, 0x00}, + {BRIDGE, M5602_XB_MCU_CLK_DIV, 0x02, 0x00}, + {BRIDGE, M5602_XB_MCU_CLK_CTRL, 0xb0, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_DIV, 0x00, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xf0, 0x00}, + {BRIDGE, M5602_XB_GPIO_DIR, 0x1d, 0x00}, + {BRIDGE, M5602_XB_GPIO_DAT, 0x1c, 0x00}, + {BRIDGE, M5602_XB_GPIO_EN_H, 0x06, 0x00}, + {BRIDGE, M5602_XB_GPIO_DIR_H, 0x06, 0x00}, + {BRIDGE, M5602_XB_GPIO_DAT_H, 0x00, 0x00}, + {BRIDGE, M5602_XB_GPIO_EN_L, 0x00, 0x00}, + {BRIDGE, M5602_XB_I2C_CLK_DIV, 0x20, 0x00}, + + {SENSOR, S5K83A_PAGE_MAP, 0x00, 0x00} +}; + +/* This could probably be considerably shortened. + I don't have the hardware to experiment with it, patches welcome +*/ +static const unsigned char init_s5k83a[][4] = +{ + {SENSOR, S5K83A_PAGE_MAP, 0x04, 0x00}, + {SENSOR, 0xaf, 0x01, 0x00}, + {SENSOR, S5K83A_PAGE_MAP, 0x00, 0x00}, + {SENSOR, 0x7b, 0xff, 0x00}, + {SENSOR, S5K83A_PAGE_MAP, 0x05, 0x00}, + {SENSOR, 0x01, 0x50, 0x00}, + {SENSOR, 0x12, 0x20, 0x00}, + {SENSOR, 0x17, 0x40, 0x00}, + {SENSOR, S5K83A_BRIGHTNESS, 0x0f, 0x00}, + {SENSOR, 0x1c, 0x00, 0x00}, + {SENSOR, 0x02, 0x70, 0x00}, + {SENSOR, 0x03, 0x0b, 0x00}, + {SENSOR, 0x04, 0xf0, 0x00}, + {SENSOR, 0x05, 0x0b, 0x00}, + {SENSOR, S5K83A_PAGE_MAP, 0x05, 0x00}, + + {BRIDGE, M5602_XB_SEN_CLK_DIV, 0x06, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0, 0x00}, + {BRIDGE, M5602_XB_ADC_CTRL, 0xc0, 0x00}, + {BRIDGE, M5602_XB_SENSOR_TYPE, 0x09, 0x00}, + {BRIDGE, M5602_XB_LINE_OF_FRAME_H, 0x81, 0x00}, + {BRIDGE, M5602_XB_PIX_OF_LINE_H, 0x82, 0x00}, + {BRIDGE, M5602_XB_SIG_INI, 0x01, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x01, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0xe4, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00}, + {BRIDGE, M5602_XB_SIG_INI, 0x00, 0x00}, + {BRIDGE, M5602_XB_SIG_INI, 0x02, 0x00}, + {BRIDGE, M5602_XB_HSYNC_PARA, 0x00, 0x00}, + {BRIDGE, M5602_XB_HSYNC_PARA, 0x00, 0x00}, + {BRIDGE, M5602_XB_HSYNC_PARA, 0x02, 0x00}, + {BRIDGE, M5602_XB_HSYNC_PARA, 0x87, 0x00}, + {BRIDGE, M5602_XB_SIG_INI, 0x00, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_DIV, 0x00, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0, 0x00}, + + {SENSOR, S5K83A_PAGE_MAP, 0x05, 0x00}, + {SENSOR, 0x06, 0x71, 0x00}, + {SENSOR, 0x07, 0xe8, 0x00}, + {SENSOR, 0x08, 0x02, 0x00}, + {SENSOR, 0x09, 0x88, 0x00}, + {SENSOR, 0x14, 0x00, 0x00}, + {SENSOR, 0x15, 0x20, 0x00}, + {SENSOR, 0x19, 0x00, 0x00}, + {SENSOR, 0x1a, 0x98, 0x00}, + {SENSOR, 0x0f, 0x02, 0x00}, + {SENSOR, 0x10, 0xe5, 0x00}, + {SENSOR, S5K83A_PAGE_MAP, 0x05, 0x00}, + {SENSOR_LONG, 0x14, 0x00, 0x20}, + {SENSOR_LONG, 0x0d, 0x00, 0x7d}, + {SENSOR_LONG, 0x1b, 0x0d, 0x05}, + + {BRIDGE, M5602_XB_SEN_CLK_DIV, 0x06, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0, 0x00}, + {BRIDGE, M5602_XB_ADC_CTRL, 0xc0, 0x00}, + {BRIDGE, M5602_XB_SENSOR_TYPE, 0x09, 0x00}, + {BRIDGE, M5602_XB_LINE_OF_FRAME_H, 0x81, 0x00}, + {BRIDGE, M5602_XB_PIX_OF_LINE_H, 0x82, 0x00}, + {BRIDGE, M5602_XB_SIG_INI, 0x01, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x01, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0xe4, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00}, + {BRIDGE, M5602_XB_SIG_INI, 0x00, 0x00}, + {BRIDGE, M5602_XB_SIG_INI, 0x02, 0x00}, + {BRIDGE, M5602_XB_HSYNC_PARA, 0x00, 0x00}, + {BRIDGE, M5602_XB_HSYNC_PARA, 0x00, 0x00}, + {BRIDGE, M5602_XB_HSYNC_PARA, 0x02, 0x00}, + {BRIDGE, M5602_XB_HSYNC_PARA, 0x87, 0x00}, + + {BRIDGE, M5602_XB_SIG_INI, 0x00, 0x00}, + {BRIDGE, M5602_XB_GPIO_DIR, 0x1d, 0x00}, + {BRIDGE, M5602_XB_GPIO_DAT, 0x08, 0x00}, + {BRIDGE, M5602_XB_GPIO_EN_H, 0x3f, 0x00}, + {BRIDGE, M5602_XB_GPIO_DIR_H, 0x3f, 0x00}, + {BRIDGE, M5602_XB_GPIO_DAT_H, 0x00, 0x00}, + {BRIDGE, M5602_XB_GPIO_EN_L, 0xff, 0x00}, + {BRIDGE, M5602_XB_GPIO_DIR_L, 0xff, 0x00}, + {BRIDGE, M5602_XB_GPIO_DAT_L, 0x00, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_DIV, 0xb0, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0x80, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_DIV, 0x00, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0, 0x00}, + {BRIDGE, M5602_XB_ADC_CTRL, 0xc0, 0x00}, + {BRIDGE, M5602_XB_SENSOR_TYPE, 0x09, 0x00}, + {BRIDGE, M5602_XB_MCU_CLK_DIV, 0x02, 0x00}, + {BRIDGE, M5602_XB_MCU_CLK_CTRL, 0xb0, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_DIV, 0x00, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xf0, 0x00}, + {BRIDGE, M5602_XB_GPIO_DIR, 0x1d, 0x00}, + {BRIDGE, M5602_XB_GPIO_DAT, 0x1c, 0x00}, + {BRIDGE, M5602_XB_GPIO_EN_H, 0x06, 0x00}, + {BRIDGE, M5602_XB_GPIO_DIR_H, 0x06, 0x00}, + {BRIDGE, M5602_XB_GPIO_DAT_H, 0x00, 0x00}, + {BRIDGE, M5602_XB_GPIO_EN_L, 0x00, 0x00}, + {BRIDGE, M5602_XB_I2C_CLK_DIV, 0x20, 0x00}, + + {SENSOR, S5K83A_PAGE_MAP, 0x04, 0x00}, + {SENSOR, 0xaf, 0x01, 0x00}, + {SENSOR, S5K83A_PAGE_MAP, 0x05, 0x00}, + /* ff ( init value )is very dark) || 71 and f0 better */ + {SENSOR, 0x7b, 0xff, 0x00}, + {SENSOR, S5K83A_PAGE_MAP, 0x05, 0x00}, + {SENSOR, 0x01, 0x50, 0x00}, + {SENSOR, 0x12, 0x20, 0x00}, + {SENSOR, 0x17, 0x40, 0x00}, + {SENSOR, S5K83A_BRIGHTNESS, 0x0f, 0x00}, + {SENSOR, 0x1c, 0x00, 0x00}, + {SENSOR, 0x02, 0x70, 0x00}, + /* some values like 0x10 give a blue-purple image */ + {SENSOR, 0x03, 0x0b, 0x00}, + {SENSOR, 0x04, 0xf0, 0x00}, + {SENSOR, 0x05, 0x0b, 0x00}, + {SENSOR, S5K83A_PAGE_MAP, 0x05, 0x00}, + + {BRIDGE, M5602_XB_SEN_CLK_DIV, 0x06, 0x00}, + /* under 80 don't work, highter depend on value */ + {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0, 0x00}, + + {BRIDGE, M5602_XB_ADC_CTRL, 0xc0, 0x00}, + {BRIDGE, M5602_XB_SENSOR_TYPE, 0x09, 0x00}, + {BRIDGE, M5602_XB_LINE_OF_FRAME_H, 0x81, 0x00}, + {BRIDGE, M5602_XB_PIX_OF_LINE_H, 0x82, 0x00}, + {BRIDGE, M5602_XB_SIG_INI, 0x01, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x01, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0xe4, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00}, + {BRIDGE, M5602_XB_SIG_INI, 0x02, 0x00}, + {BRIDGE, M5602_XB_HSYNC_PARA, 0x00, 0x00}, + {BRIDGE, M5602_XB_HSYNC_PARA, 0x00, 0x00}, + {BRIDGE, M5602_XB_HSYNC_PARA, 0x02, 0x00}, + {BRIDGE, M5602_XB_HSYNC_PARA, 0x7f, 0x00}, + + {BRIDGE, M5602_XB_SIG_INI, 0x00, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_DIV, 0x00, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0, 0x00}, + + {SENSOR, S5K83A_PAGE_MAP, 0x05, 0x00}, + {SENSOR, 0x06, 0x71, 0x00}, + {SENSOR, 0x07, 0xe8, 0x00}, + {SENSOR, 0x08, 0x02, 0x00}, + {SENSOR, 0x09, 0x88, 0x00}, + {SENSOR, 0x14, 0x00, 0x00}, + {SENSOR, 0x15, 0x20, 0x00}, + {SENSOR, 0x19, 0x00, 0x00}, + {SENSOR, 0x1a, 0x98, 0x00}, + {SENSOR, 0x0f, 0x02, 0x00}, + {SENSOR, 0x10, 0xe5, 0x00}, + {SENSOR, S5K83A_PAGE_MAP, 0x05, 0x00}, + {SENSOR_LONG, 0x14, 0x00, 0x20}, + {SENSOR_LONG, 0x0d, 0x00, 0x7d}, + {SENSOR_LONG, 0x1b, 0x0d, 0x05}, + + /* The following sequence is useless after a clean boot + but is necessary after resume from suspend */ + {BRIDGE, M5602_XB_GPIO_DIR, 0x1d, 0x00}, + {BRIDGE, M5602_XB_GPIO_DAT, 0x08, 0x00}, + {BRIDGE, M5602_XB_GPIO_EN_H, 0x3f, 0x00}, + {BRIDGE, M5602_XB_GPIO_DIR_H, 0x3f, 0x00}, + {BRIDGE, M5602_XB_GPIO_DAT_H, 0x00, 0x00}, + {BRIDGE, M5602_XB_GPIO_EN_L, 0xff, 0x00}, + {BRIDGE, M5602_XB_GPIO_DIR_L, 0xff, 0x00}, + {BRIDGE, M5602_XB_GPIO_DAT_L, 0x00, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_DIV, 0xb0, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0x80, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_DIV, 0x00, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0, 0x00}, + {BRIDGE, M5602_XB_ADC_CTRL, 0xc0, 0x00}, + {BRIDGE, M5602_XB_SENSOR_TYPE, 0x09, 0x00}, + {BRIDGE, M5602_XB_MCU_CLK_DIV, 0x02, 0x00}, + {BRIDGE, M5602_XB_MCU_CLK_CTRL, 0xb0, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_DIV, 0x00, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xf0, 0x00}, + {BRIDGE, M5602_XB_GPIO_DIR, 0x1d, 0x00}, + {BRIDGE, M5602_XB_GPIO_DAT, 0x1c, 0x00}, + {BRIDGE, M5602_XB_GPIO_EN_H, 0x06, 0x00}, + {BRIDGE, M5602_XB_GPIO_DIR_H, 0x06, 0x00}, + {BRIDGE, M5602_XB_GPIO_DAT_H, 0x00, 0x00}, + {BRIDGE, M5602_XB_GPIO_EN_L, 0x00, 0x00}, + {BRIDGE, M5602_XB_I2C_CLK_DIV, 0x20, 0x00}, + + {SENSOR, S5K83A_PAGE_MAP, 0x04, 0x00}, + {SENSOR, 0xaf, 0x01, 0x00}, + {SENSOR, S5K83A_PAGE_MAP, 0x00, 0x00}, + {SENSOR, 0x7b, 0xff, 0x00}, + {SENSOR, S5K83A_PAGE_MAP, 0x05, 0x00}, + {SENSOR, 0x01, 0x50, 0x00}, + {SENSOR, 0x12, 0x20, 0x00}, + {SENSOR, 0x17, 0x40, 0x00}, + {SENSOR, S5K83A_BRIGHTNESS, 0x0f, 0x00}, + {SENSOR, 0x1c, 0x00, 0x00}, + {SENSOR, 0x02, 0x70, 0x00}, + {SENSOR, 0x03, 0x0b, 0x00}, + {SENSOR, 0x04, 0xf0, 0x00}, + {SENSOR, 0x05, 0x0b, 0x00}, + {SENSOR, S5K83A_PAGE_MAP, 0x05, 0x00}, + + {BRIDGE, M5602_XB_SEN_CLK_DIV, 0x06, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0, 0x00}, + {BRIDGE, M5602_XB_ADC_CTRL, 0xc0, 0x00}, + {BRIDGE, M5602_XB_SENSOR_TYPE, 0x09, 0x00}, + {BRIDGE, M5602_XB_LINE_OF_FRAME_H, 0x81, 0x00}, + {BRIDGE, M5602_XB_PIX_OF_LINE_H, 0x82, 0x00}, + {BRIDGE, M5602_XB_SIG_INI, 0x01, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x01, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0xe4, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00}, + {BRIDGE, M5602_XB_SIG_INI, 0x00, 0x00}, + {BRIDGE, M5602_XB_SIG_INI, 0x02, 0x00}, + {BRIDGE, M5602_XB_HSYNC_PARA, 0x00, 0x00}, + {BRIDGE, M5602_XB_HSYNC_PARA, 0x00, 0x00}, + {BRIDGE, M5602_XB_HSYNC_PARA, 0x02, 0x00}, + {BRIDGE, M5602_XB_HSYNC_PARA, 0x7f, 0x00}, + {BRIDGE, M5602_XB_SIG_INI, 0x00, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_DIV, 0x00, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0, 0x00}, + + {SENSOR, S5K83A_PAGE_MAP, 0x05, 0x00}, + {SENSOR, 0x06, 0x71, 0x00}, + {SENSOR, 0x07, 0xe8, 0x00}, + {SENSOR, 0x08, 0x02, 0x00}, + {SENSOR, 0x09, 0x88, 0x00}, + {SENSOR, 0x14, 0x00, 0x00}, + {SENSOR, 0x15, 0x20, 0x00}, + {SENSOR, 0x19, 0x00, 0x00}, + {SENSOR, 0x1a, 0x98, 0x00}, + {SENSOR, 0x0f, 0x02, 0x00}, + + {SENSOR, 0x10, 0xe5, 0x00}, + {SENSOR, S5K83A_PAGE_MAP, 0x05, 0x00}, + {SENSOR_LONG, 0x14, 0x00, 0x20}, + {SENSOR_LONG, 0x0d, 0x00, 0x7d}, + {SENSOR_LONG, 0x1b, 0x0d, 0x05}, + + /* normal colors + (this is value after boot, but after tries can be different) */ + {SENSOR, 0x00, 0x06, 0x00}, + + /* set default brightness */ + {SENSOR_LONG, 0x14, 0x00, 0x20}, + {SENSOR_LONG, 0x0d, 0x01, 0x00}, + {SENSOR_LONG, 0x1b, S5K83A_DEFAULT_BRIGHTNESS >> 3, + S5K83A_DEFAULT_BRIGHTNESS >> 1}, + + /* set default whiteness */ + {SENSOR, S5K83A_WHITENESS, S5K83A_DEFAULT_WHITENESS, 0x00}, + + /* set default gain */ + {SENSOR_LONG, 0x18, 0x00, S5K83A_DEFAULT_GAIN} +}; + +#endif diff --git a/drivers/media/video/gspca/m5602/m5602_sensor.h b/drivers/media/video/gspca/m5602/m5602_sensor.h new file mode 100644 index 0000000..930fcaa --- /dev/null +++ b/drivers/media/video/gspca/m5602/m5602_sensor.h @@ -0,0 +1,76 @@ +/* + * USB Driver for ALi m5602 based webcams + * + * Copyright (C) 2008 Erik Andren + * Copyright (C) 2007 Ilyes Gouta. Based on the m5603x Linux Driver Project. + * Copyright (C) 2005 m5603x Linux Driver Project + * + * Portions of code to USB interface and ALi driver software, + * Copyright (c) 2006 Willem Duinker + * v4l2 interface modeled after the V4L2 driver + * for SN9C10x PC Camera Controllers + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation, version 2. + * + */ + +#ifndef M5602_SENSOR_H_ +#define M5602_SENSOR_H_ + +#include "m5602_bridge.h" + +#define M5602_DEFAULT_FRAME_WIDTH 640 +#define M5602_DEFAULT_FRAME_HEIGHT 480 + +#define M5602_MAX_CTRLS (V4L2_CID_LASTP1 - V4L2_CID_BASE + 10) + +/* Enumerates all supported sensors */ +enum sensors { + OV9650_SENSOR = 1, + S5K83A_SENSOR = 2, + S5K4AA_SENSOR = 3, + MT9M111_SENSOR = 4, + PO1030_SENSOR = 5 +}; + +/* Enumerates all possible instruction types */ +enum instruction { + BRIDGE, + SENSOR, + SENSOR_LONG +}; + +struct m5602_sensor { + /* Defines the name of a sensor */ + char name[32]; + + /* What i2c address the sensor is connected to */ + u8 i2c_slave_id; + + /* Probes if the sensor is connected */ + int (*probe)(struct sd *sd); + + /* Performs a initialization sequence */ + int (*init)(struct sd *sd); + + /* Performs a power down sequence */ + int (*power_down)(struct sd *sd); + + /* Reads a sensor register */ + int (*read_sensor)(struct sd *sd, const u8 address, + u8 *i2c_data, const u8 len); + + /* Writes to a sensor register */ + int (*write_sensor)(struct sd *sd, const u8 address, + u8 *i2c_data, const u8 len); + + int nctrls; + struct ctrl ctrls[M5602_MAX_CTRLS]; + + char nmodes; + struct v4l2_pix_format modes[]; +}; + +#endif -- cgit v0.10.2 From e293e599524f74532b0add53ddf80f10ff854598 Mon Sep 17 00:00:00 2001 From: Erik Andren Date: Fri, 3 Oct 2008 08:46:50 -0300 Subject: V4L/DVB (9093): gspca: Cleanup code and small changes. - convert some #define to enum. - remove some comments. - return ENOMEM on memory allocation failure. Signed-off-by: Erik Andren Signed-off-by: Jean-Francois Moine Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/gspca/gspca.c b/drivers/media/video/gspca/gspca.c index 02824fc..9db3d89 100644 --- a/drivers/media/video/gspca/gspca.c +++ b/drivers/media/video/gspca/gspca.c @@ -237,7 +237,7 @@ static void bulk_irq(struct urb *urb * On LAST_PACKET, a new frame is returned. */ struct gspca_frame *gspca_frame_add(struct gspca_dev *gspca_dev, - int packet_type, + enum gspca_packet_type packet_type, struct gspca_frame *frame, const __u8 *data, int len) @@ -317,7 +317,6 @@ static void *rvmalloc(unsigned long size) void *mem; unsigned long adr; -/* size = PAGE_ALIGN(size); (already done) */ mem = vmalloc_32(size); if (mem != NULL) { adr = (unsigned long) mem; @@ -937,7 +936,6 @@ static int vidioc_querycap(struct file *file, void *priv, memset(cap, 0, sizeof *cap); strncpy(cap->driver, gspca_dev->sd_desc->name, sizeof cap->driver); -/* strncpy(cap->card, gspca_dev->cam.dev_name, sizeof cap->card); */ if (gspca_dev->dev->product != NULL) { strncpy(cap->card, gspca_dev->dev->product, sizeof cap->card); @@ -1571,7 +1569,6 @@ static int vidioc_qbuf(struct file *file, void *priv, } frame->v4l2_buf.flags |= V4L2_BUF_FLAG_QUEUED; -/* frame->v4l2_buf.flags &= ~V4L2_BUF_FLAG_DONE; */ if (frame->v4l2_buf.memory == V4L2_MEMORY_USERPTR) { frame->v4l2_buf.m.userptr = v4l2_buf->m.userptr; @@ -1836,22 +1833,21 @@ int gspca_dev_probe(struct usb_interface *intf, if (dev_size < sizeof *gspca_dev) dev_size = sizeof *gspca_dev; gspca_dev = kzalloc(dev_size, GFP_KERNEL); - if (gspca_dev == NULL) { + if (!gspca_dev) { err("couldn't kzalloc gspca struct"); - return -EIO; + return -ENOMEM; } kref_init(&gspca_dev->kref); gspca_dev->usb_buf = kmalloc(USB_BUF_SZ, GFP_KERNEL); if (!gspca_dev->usb_buf) { err("out of memory"); - ret = -EIO; + ret = -ENOMEM; goto out; } gspca_dev->dev = dev; gspca_dev->iface = interface->bInterfaceNumber; gspca_dev->nbalt = intf->num_altsetting; gspca_dev->sd_desc = sd_desc; -/* gspca_dev->users = 0; (done by kzalloc) */ gspca_dev->nbufread = 2; /* configure the subdriver and initialize the USB device */ diff --git a/drivers/media/video/gspca/gspca.h b/drivers/media/video/gspca/gspca.h index f900654..4779dd0 100644 --- a/drivers/media/video/gspca/gspca.h +++ b/drivers/media/video/gspca/gspca.h @@ -106,10 +106,12 @@ struct sd_desc { }; /* packet types when moving from iso buf to frame buf */ -#define DISCARD_PACKET 0 -#define FIRST_PACKET 1 -#define INTER_PACKET 2 -#define LAST_PACKET 3 +enum gspca_packet_type { + DISCARD_PACKET, + FIRST_PACKET, + INTER_PACKET, + LAST_PACKET +}; struct gspca_frame { __u8 *data; /* frame buffer */ @@ -175,7 +177,7 @@ int gspca_dev_probe(struct usb_interface *intf, struct module *module); void gspca_disconnect(struct usb_interface *intf); struct gspca_frame *gspca_frame_add(struct gspca_dev *gspca_dev, - int packet_type, + enum gspca_packet_type packet_type, struct gspca_frame *frame, const __u8 *data, int len); diff --git a/drivers/media/video/gspca/m5602/m5602_core.c b/drivers/media/video/gspca/m5602/m5602_core.c index 559495e..ac105ef 100644 --- a/drivers/media/video/gspca/m5602/m5602_core.c +++ b/drivers/media/video/gspca/m5602/m5602_core.c @@ -146,7 +146,6 @@ int m5602_probe_sensor(struct sd *sd) return 0; } - /* More sensor probe function goes here */ info("Failed to find a sensor"); sd->sensor = NULL; -- cgit v0.10.2 From 1b3345996c056a979cfabf96c0815b4843d9bbfc Mon Sep 17 00:00:00 2001 From: Erik Andren Date: Fri, 3 Oct 2008 09:28:45 -0300 Subject: V4L/DVB (9094): gspca: Frame counter in ALi m5602. Signed-off-by: Erik Andren Signed-off-by: Jean-Francois Moine Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/gspca/m5602/m5602_core.c b/drivers/media/video/gspca/m5602/m5602_core.c index ac105ef..58ebffd 100644 --- a/drivers/media/video/gspca/m5602/m5602_core.c +++ b/drivers/media/video/gspca/m5602/m5602_core.c @@ -146,6 +146,7 @@ int m5602_probe_sensor(struct sd *sd) return 0; } + /* More sensor probe function goes here */ info("Failed to find a sensor"); sd->sensor = NULL; @@ -202,12 +203,13 @@ void m5602_urb_complete(struct gspca_dev *gspca_dev, struct gspca_frame *frame, /* Complete the last frame (if any) */ frame = gspca_frame_add(gspca_dev, LAST_PACKET, frame, data, 0); + sd->frame_count++; /* Create a new frame */ gspca_frame_add(gspca_dev, FIRST_PACKET, frame, data, len); - PDEBUG(DBG_V4L2, "Starting new frame. First urb contained %d", - len); + PDEBUG(DBG_V4L2, "Starting new frame %d", + sd->frame_count); } else { int cur_frame_len = frame->data_end - frame->data; @@ -217,8 +219,8 @@ void m5602_urb_complete(struct gspca_dev *gspca_dev, struct gspca_frame *frame, len -= 4; if (cur_frame_len + len <= frame->v4l2_buf.length) { - PDEBUG(DBG_DATA, "Continuing frame copying %d bytes", - len); + PDEBUG(DBG_DATA, "Continuing frame %d copying %d bytes", + sd->frame_count, len); gspca_frame_add(gspca_dev, INTER_PACKET, frame, data, len); -- cgit v0.10.2 From d2d7e9ae3138307284c815e1c37ea0b7b8834692 Mon Sep 17 00:00:00 2001 From: Erik Andren Date: Fri, 3 Oct 2008 15:29:02 -0300 Subject: V4L/DVB (9095): gspca: Moves some sensor initialization to each sensor in m5602. Signed-off-by: Erik Andren Signed-off-by: Jean-Francois Moine Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/gspca/m5602/m5602_bridge.h b/drivers/media/video/gspca/m5602/m5602_bridge.h index fcbc37b..18ca19a 100644 --- a/drivers/media/video/gspca/m5602/m5602_bridge.h +++ b/drivers/media/video/gspca/m5602/m5602_bridge.h @@ -152,6 +152,8 @@ struct sd { /* A pointer to the currently connected sensor */ struct m5602_sensor *sensor; + struct sd_desc *desc; + /* The current frame's id, used to detect frame boundaries */ u8 frame_id; diff --git a/drivers/media/video/gspca/m5602/m5602_core.c b/drivers/media/video/gspca/m5602/m5602_core.c index 58ebffd..4750735 100644 --- a/drivers/media/video/gspca/m5602/m5602_core.c +++ b/drivers/media/video/gspca/m5602/m5602_core.c @@ -108,44 +108,28 @@ int m5602_probe_sensor(struct sd *sd) { /* Try the po1030 */ sd->sensor = &po1030; - if (!sd->sensor->probe(sd)) { - sd_desc.ctrls = po1030.ctrls; - sd_desc.nctrls = po1030.nctrls; + if (!sd->sensor->probe(sd)) return 0; - } /* Try the mt9m111 sensor */ sd->sensor = &mt9m111; - if (!sd->sensor->probe(sd)) { - sd_desc.ctrls = mt9m111.ctrls; - sd_desc.nctrls = mt9m111.nctrls; + if (!sd->sensor->probe(sd)) return 0; - } /* Try the s5k4aa */ sd->sensor = &s5k4aa; - if (!sd->sensor->probe(sd)) { - sd_desc.ctrls = s5k4aa.ctrls; - sd_desc.nctrls = s5k4aa.nctrls; + if (!sd->sensor->probe(sd)) return 0; - } /* Try the ov9650 */ sd->sensor = &ov9650; - if (!sd->sensor->probe(sd)) { - sd_desc.ctrls = ov9650.ctrls; - sd_desc.nctrls = ov9650.nctrls; + if (!sd->sensor->probe(sd)) return 0; - } /* Try the s5k83a */ sd->sensor = &s5k83a; - if (!sd->sensor->probe(sd)) { - sd_desc.ctrls = s5k83a.ctrls; - sd_desc.nctrls = s5k83a.nctrls; + if (!sd->sensor->probe(sd)) return 0; - } - /* More sensor probe function goes here */ info("Failed to find a sensor"); @@ -246,8 +230,10 @@ int m5602_configure(struct gspca_dev *gspca_dev, int err; PDEBUG(DBG_GSPCA, "m5602_configure start"); + cam = &gspca_dev->cam; cam->epaddr = M5602_ISOC_ENDPOINT_ADDR; + sd->desc = &sd_desc; if (dump_bridge) m5602_dump_bridge(sd); diff --git a/drivers/media/video/gspca/m5602/m5602_mt9m111.c b/drivers/media/video/gspca/m5602/m5602_mt9m111.c index 17f04dd..ea22502 100644 --- a/drivers/media/video/gspca/m5602/m5602_mt9m111.c +++ b/drivers/media/video/gspca/m5602/m5602_mt9m111.c @@ -62,6 +62,8 @@ int mt9m111_probe(struct sd *sd) sensor_found: sd->gspca_dev.cam.cam_mode = mt9m111.modes; sd->gspca_dev.cam.nmodes = mt9m111.nmodes; + sd->desc->ctrls = mt9m111.ctrls; + sd->desc->nctrls = mt9m111.nctrls; return 0; } diff --git a/drivers/media/video/gspca/m5602/m5602_ov9650.c b/drivers/media/video/gspca/m5602/m5602_ov9650.c index 74c3ffe..31c5896 100644 --- a/drivers/media/video/gspca/m5602/m5602_ov9650.c +++ b/drivers/media/video/gspca/m5602/m5602_ov9650.c @@ -132,6 +132,8 @@ int ov9650_probe(struct sd *sd) sensor_found: sd->gspca_dev.cam.cam_mode = ov9650.modes; sd->gspca_dev.cam.nmodes = ov9650.nmodes; + sd->desc->ctrls = ov9650.ctrls; + sd->desc->nctrls = ov9650.nctrls; return 0; } diff --git a/drivers/media/video/gspca/m5602/m5602_po1030.c b/drivers/media/video/gspca/m5602/m5602_po1030.c index 14a8f92..08c015bd 100644 --- a/drivers/media/video/gspca/m5602/m5602_po1030.c +++ b/drivers/media/video/gspca/m5602/m5602_po1030.c @@ -59,6 +59,8 @@ int po1030_probe(struct sd *sd) sensor_found: sd->gspca_dev.cam.cam_mode = po1030.modes; sd->gspca_dev.cam.nmodes = po1030.nmodes; + sd->desc->ctrls = po1030.ctrls; + sd->desc->nctrls = po1030.nctrls; return 0; } diff --git a/drivers/media/video/gspca/m5602/m5602_s5k4aa.c b/drivers/media/video/gspca/m5602/m5602_s5k4aa.c index 3a2ae7a..6820256 100644 --- a/drivers/media/video/gspca/m5602/m5602_s5k4aa.c +++ b/drivers/media/video/gspca/m5602/m5602_s5k4aa.c @@ -78,6 +78,9 @@ int s5k4aa_probe(struct sd *sd) sensor_found: sd->gspca_dev.cam.cam_mode = s5k4aa.modes; sd->gspca_dev.cam.nmodes = s5k4aa.nmodes; + sd->desc->ctrls = s5k4aa.ctrls; + sd->desc->nctrls = s5k4aa.nctrls; + return 0; } diff --git a/drivers/media/video/gspca/m5602/m5602_s5k83a.c b/drivers/media/video/gspca/m5602/m5602_s5k83a.c index a4d6a81..c1ff967 100644 --- a/drivers/media/video/gspca/m5602/m5602_s5k83a.c +++ b/drivers/media/video/gspca/m5602/m5602_s5k83a.c @@ -63,6 +63,8 @@ int s5k83a_probe(struct sd *sd) sensor_found: sd->gspca_dev.cam.cam_mode = s5k83a.modes; sd->gspca_dev.cam.nmodes = s5k83a.nmodes; + sd->desc->ctrls = s5k83a.ctrls; + sd->desc->nctrls = s5k83a.nctrls; return 0; } -- cgit v0.10.2 From eeb00c604ad203a51a0b92e124bcc4f98ba7e2c0 Mon Sep 17 00:00:00 2001 From: Erik Andren Date: Fri, 3 Oct 2008 15:47:03 -0300 Subject: V4L/DVB (9096): gspca: Subdriver selection at config time. Signed-off-by: Erik Andren Signed-off-by: Jean-Francois Moine Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/gspca/Kconfig b/drivers/media/video/gspca/Kconfig index fd31099..aa7f3eb 100644 --- a/drivers/media/video/gspca/Kconfig +++ b/drivers/media/video/gspca/Kconfig @@ -1,16 +1,203 @@ -config USB_GSPCA - tristate "USB GSPCA driver" +menuconfig USB_GSPCA + tristate "GSPCA based webcams" depends on VIDEO_V4L2 + default m ---help--- - Say Y here if you want support for various USB webcams. + Say Y here if you want to enable selecting webcams based + on the GSPCA framework. - See for more info. + See for more info. - This driver uses the Video For Linux API. You must say Y or M to - "Video For Linux" to use this driver. + This driver uses the Video For Linux API. You must say Y or M to + "Video For Linux" to use this driver. - To compile this driver as modules, choose M here: the - modules will be called gspca_xxxx. + To compile this driver as modules, choose M here: the + modules will be called gspca_main. + + +if USB_GSPCA && VIDEO_V4L2 source "drivers/media/video/gspca/m5602/Kconfig" +config USB_GSPCA_CONEX + tristate "Conexant Camera Driver" + depends on VIDEO_V4L2 && USB_GSPCA + help + Say Y here if you want support for cameras based on the Conexant chip. + + To compile this driver as a module, choose M here: the + module will be called gspca_conex. + +config USB_GSPCA_ETOMS + tristate "Etoms USB Camera Driver" + depends on VIDEO_V4L2 && USB_GSPCA + help + Say Y here if you want support for cameras based on the Etoms chip. + + To compile this driver as a module, choose M here: the + module will be called gspca_etoms. + +config USB_GSPCA_MARS + tristate "Mars USB Camera Driver" + depends on VIDEO_V4L2 && USB_GSPCA + help + Say Y here if you want support for cameras based on the Mars chip. + + To compile this driver as a module, choose M here: the + module will be called gspca_mars. + +config USB_GSPCA_OV519 + tristate "OV519 USB Camera Driver" + depends on VIDEO_V4L2 && USB_GSPCA + help + Say Y here if you want support for cameras based on the OV519 chip. + + To compile this driver as a module, choose M here: the + module will be called gspca_ov519. + +config USB_GSPCA_PAC207 + tristate "Pixart PAC207 USB Camera Driver" + depends on VIDEO_V4L2 && USB_GSPCA + help + Say Y here if you want support for cameras based on the PAC207 chip. + + To compile this driver as a module, choose M here: the + module will be called gspca_pac207. + +config USB_GSPCA_PAC7311 + tristate "Pixart PAC7311 USB Camera Driver" + depends on VIDEO_V4L2 && USB_GSPCA + help + Say Y here if you want support for cameras based on the PAC7311 chip. + + To compile this driver as a module, choose M here: the + module will be called gspca_pac7311. + +config USB_GSPCA_SONIXB + tristate "SN9C102 USB Camera Driver" + depends on VIDEO_V4L2 && USB_GSPCA + help + Say Y here if you want support for cameras based on the SONIXB chip. + + To compile this driver as a module, choose M here: the + module will be called gspca_sonixb. + +config USB_GSPCA_SONIXJ + tristate "SONIX JPEG USB Camera Driver" + depends on VIDEO_V4L2 && USB_GSPCA + help + Say Y here if you want support for cameras based on the SONIXJ chip. + + To compile this driver as a module, choose M here: the + module will be called gspca_sonixj + +config USB_GSPCA_SPCA500 + tristate "SPCA500 USB Camera Driver" + depends on VIDEO_V4L2 && USB_GSPCA + help + Say Y here if you want support for cameras based on the SPCA500 chip. + + To compile this driver as a module, choose M here: the + module will be called gspca_spca500. + +config USB_GSPCA_SPCA501 + tristate "SPCA501 USB Camera Driver" + depends on VIDEO_V4L2 && USB_GSPCA + help + Say Y here if you want support for cameras based on the SPCA501 chip. + + To compile this driver as a module, choose M here: the + module will be called gspca_spca501. + +config USB_GSPCA_SPCA505 + tristate "SPCA505 USB Camera Driver" + depends on VIDEO_V4L2 && USB_GSPCA + help + Say Y here if you want support for cameras based on the SPCA505 chip. + + To compile this driver as a module, choose M here: the + module will be called gspca_spca505. + +config USB_GSPCA_SPCA506 + tristate "SPCA506 USB Camera Driver" + depends on VIDEO_V4L2 && USB_GSPCA + help + Say Y here if you want support for cameras based on the SPCA506 chip. + + To compile this driver as a module, choose M here: the + module will be called gspca_spca506. + +config USB_GSPCA_SPCA508 + tristate "SPCA508 USB Camera Driver" + depends on VIDEO_V4L2 && USB_GSPCA + help + Say Y here if you want support for cameras based on the SPCA508 chip. + + To compile this driver as a module, choose M here: the + module will be called gspca_spca508. + +config USB_GSPCA_SPCA561 + tristate "SPCA561 USB Camera Driver" + depends on VIDEO_V4L2 && USB_GSPCA + help + Say Y here if you want support for cameras based on the SPCA561 chip. + + To compile this driver as a module, choose M here: the + module will be called gspca_spca561. + +config USB_GSPCA_STK014 + tristate "Syntek DV4000 (STK014) USB Camera Driver" + depends on VIDEO_V4L2 && USB_GSPCA + help + Say Y here if you want support for cameras based on the STK014 chip. + + To compile this driver as a module, choose M here: the + module will be called gspca_stk014. + +config USB_GSPCA_SPCA5XX + tristate "SPCA5xx USB Camera Driver" + depends on VIDEO_V4L2 && USB_GSPCA + help + Say Y here if you want support for cameras based on the Sunplus + SPCA504(abc) SPCA533 SPCA536 chips. + + To compile this driver as a module, choose M here: the + module will be called gspca_spca5xx. + +config USB_GSPCA_T613 + tristate "T613 (JPEG Compliance) USB Camera Driver" + depends on VIDEO_V4L2 && USB_GSPCA + help + Say Y here if you want support for cameras based on the T613 chip. + + To compile this driver as a module, choose M here: the + module will be called gspca_t613. + +config USB_GSPCA_TV8531 + tristate "TV8532 USB Camera Driver" + depends on VIDEO_V4L2 && USB_GSPCA + help + Say Y here if you want support for cameras based on the TV8531 chip. + + To compile this driver as a module, choose M here: the + module will be called gspca_tv8532. + +config USB_GSPCA_VC032X + tristate "VC032X USB Camera Driver" + depends on VIDEO_V4L2 && USB_GSPCA + help + Say Y here if you want support for cameras based on the VC032X chip. + + To compile this driver as a module, choose M here: the + module will be called gspca_vc032x. + +config USB_GSPCA_ZC3XX + tristate "VC3xx USB Camera Driver" + depends on VIDEO_V4L2 && USB_GSPCA + help + Say Y here if you want support for cameras based on the ZC3XX chip. + + To compile this driver as a module, choose M here: the + module will be called gspca_zc3xx. + +endif diff --git a/drivers/media/video/gspca/Makefile b/drivers/media/video/gspca/Makefile index 488ed97..b510b06 100644 --- a/drivers/media/video/gspca/Makefile +++ b/drivers/media/video/gspca/Makefile @@ -1,33 +1,46 @@ -obj-$(CONFIG_USB_GSPCA) += gspca_main.o \ - gspca_conex.o gspca_etoms.o gspca_finepix.o gspca_mars.o \ - gspca_ov519.o gspca_pac207.o gspca_pac7311.o \ - gspca_sonixb.o gspca_sonixj.o gspca_spca500.o gspca_spca501.o \ - gspca_spca505.o gspca_spca506.o gspca_spca508.o gspca_spca561.o \ - gspca_sunplus.o gspca_stk014.o gspca_t613.o gspca_tv8532.o \ - gspca_vc032x.o gspca_zc3xx.o +obj-$(CONFIG_USB_GSPCA) += gspca_main.o +obj-$(CONFIG_USB_GSPCA_CONEX) += gspca_conex.o +obj-$(CONFIG_USB_GSPCA_ETOMS) += gspca_etoms.o +obj-$(CONFIG_USB_GSPCA_MARS) += gspca_mars.o +obj-$(CONFIG_USB_GSPCA_OV519) += gspca_ov519.o +obj-$(CONFIG_USB_GSPCA_PAC207) += gspca_pac207.o +obj-$(CONFIG_USB_GSPCA_PAC7311) += gspca_pac7311.o +obj-$(CONFIG_USB_GSPCA_SONIXB) += gspca_sonixb.o +obj-$(CONFIG_USB_GSPCA_SONXIJ) += gspca_sonixj.o +obj-$(CONFIG_USB_GSPCA_SPCA500) += gspca_spca500.o +obj-$(CONFIG_USB_GSPCA_SPCA501) += gspca_spca501.o +obj-$(CONFIG_USB_GSPCA_SPCA505) += gspca_spca505.o +obj-$(CONFIG_USB_GSPCA_SPCA506) += gspca_spca506.o +obj-$(CONFIG_USB_GSPCA_SPCA508) += gspca_spca508.o +obj-$(CONFIG_USB_GSPCA_SPCA561) += gspca_spca561.o +obj-$(CONFIG_USB_GSPCA_SUNPLUS) += gspca_sunplus.o +obj-$(CONFIG_USB_GSPCA_STK014) += gspca_stk014.o +obj-$(CONFIG_USB_GSPCA_T613) += gspca_t613.o +obj-$(CONFIG_USB_GSPCA_TV8532) += gspca_tv8532.o +obj-$(CONFIG_USB_GSPCA_VC032X) += gspca_vc032x.o +obj-$(CONFIG_USB_GSPCA_ZC3XX) += gspca_zc3xx.o -gspca_main-objs := gspca.o -gspca_conex-objs := conex.o -gspca_etoms-objs := etoms.o -gspca_finepix-objs := finepix.o -gspca_mars-objs := mars.o -gspca_ov519-objs := ov519.o -gspca_pac207-objs := pac207.o -gspca_pac7311-objs := pac7311.o -gspca_sonixb-objs := sonixb.o -gspca_sonixj-objs := sonixj.o -gspca_spca500-objs := spca500.o -gspca_spca501-objs := spca501.o -gspca_spca505-objs := spca505.o -gspca_spca506-objs := spca506.o -gspca_spca508-objs := spca508.o -gspca_spca561-objs := spca561.o -gspca_stk014-objs := stk014.o -gspca_sunplus-objs := sunplus.o -gspca_t613-objs := t613.o -gspca_tv8532-objs := tv8532.o -gspca_vc032x-objs := vc032x.o -gspca_zc3xx-objs := zc3xx.o +gspca_main-objs := gspca.o +gspca_conex-objs := conex.o +gspca_etoms-objs := etoms.o +gspca_mars-objs := mars.o +gspca_ov519-objs := ov519.o +gspca_pac207-objs := pac207.o +gspca_pac7311-objs := pac7311.o +gspca_sonixb-objs := sonixb.o +gspca_sonixj-objs := sonixj.o +gspca_spca500-objs := spca500.o +gspca_spca501-objs := spca501.o +gspca_spca505-objs := spca505.o +gspca_spca506-objs := spca506.o +gspca_spca508-objs := spca508.o +gspca_spca561-objs := spca561.o +gspca_stk014-objs := stk014.o +gspca_sunplus-objs := sunplus.o +gspca_t613-objs := t613.o +gspca_tv8532-objs := tv8532.o +gspca_vc032x-objs := vc032x.o +gspca_zc3xx-objs := zc3xx.o -obj-$(CONFIG_USB_M5602) += m5602/ +obj-$(CONFIG_USB_M5602) += m5602/ diff --git a/drivers/media/video/gspca/m5602/Kconfig b/drivers/media/video/gspca/m5602/Kconfig index 7de33e2..5a69016 100644 --- a/drivers/media/video/gspca/m5602/Kconfig +++ b/drivers/media/video/gspca/m5602/Kconfig @@ -1,5 +1,5 @@ config USB_M5602 - tristate "USB ALi m5602 Webcam support" + tristate "ALi USB m5602 Camera Driver" depends on VIDEO_V4L2 && USB_GSPCA help Say Y here if you want support for cameras based on the @@ -8,4 +8,4 @@ config USB_M5602 See for more info. To compile this driver as a module, choose M here: the - module will be called gspca-m5602. + module will be called gspca_m5602. -- cgit v0.10.2 From 803f9ccf50178af6cde7aec86db2d78db3d069e7 Mon Sep 17 00:00:00 2001 From: Jean-Francois Moine Date: Sat, 4 Oct 2008 14:17:02 -0300 Subject: V4L/DVB (9097): gspca: Adjust control values and restore compilation of sonixj. - no compilation since last changeset - brightness is a signed value - better values of the color matrix [mchehab@redhat.com: fix a merge conflict] Signed-off-by: Jean-Francois Moine Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/gspca/Makefile b/drivers/media/video/gspca/Makefile index b510b06..b87322f 100644 --- a/drivers/media/video/gspca/Makefile +++ b/drivers/media/video/gspca/Makefile @@ -6,7 +6,7 @@ obj-$(CONFIG_USB_GSPCA_OV519) += gspca_ov519.o obj-$(CONFIG_USB_GSPCA_PAC207) += gspca_pac207.o obj-$(CONFIG_USB_GSPCA_PAC7311) += gspca_pac7311.o obj-$(CONFIG_USB_GSPCA_SONIXB) += gspca_sonixb.o -obj-$(CONFIG_USB_GSPCA_SONXIJ) += gspca_sonixj.o +obj-$(CONFIG_USB_GSPCA_SONIXJ) += gspca_sonixj.o obj-$(CONFIG_USB_GSPCA_SPCA500) += gspca_spca500.o obj-$(CONFIG_USB_GSPCA_SPCA501) += gspca_spca501.o obj-$(CONFIG_USB_GSPCA_SPCA505) += gspca_spca505.o diff --git a/drivers/media/video/gspca/sonixj.c b/drivers/media/video/gspca/sonixj.c index 03fe77d..93b1734 100644 --- a/drivers/media/video/gspca/sonixj.c +++ b/drivers/media/video/gspca/sonixj.c @@ -267,10 +267,12 @@ static const __u8 gamma_def[] = { 0xa6, 0xb2, 0xbf, 0xca, 0xd5, 0xe0, 0xeb, 0xf5, 0xff }; +/* color matrix and offsets */ static const __u8 reg84[] = { - 0x14, 0x00, 0x27, 0x00, 0x07, 0x00, 0xe5, 0x0f, - 0xe4, 0x0f, 0x38, 0x00, 0x3e, 0x00, 0xc3, 0x0f, - 0xf7, 0x0f, 0x00, 0x00, 0x00 + 0x14, 0x00, 0x27, 0x00, 0x07, 0x00, /* YR YG YB gains */ + 0xe8, 0x0f, 0xda, 0x0f, 0x40, 0x00, /* UR UG UB */ + 0x3e, 0x00, 0xcd, 0x0f, 0xf7, 0x0f, /* VR VG VB */ + 0x00, 0x00, 0x00 /* YUV offsets */ }; static const __u8 hv7131r_sensor_init[][8] = { {0xC1, 0x11, 0x01, 0x08, 0x01, 0x00, 0x00, 0x10}, @@ -1102,20 +1104,17 @@ static unsigned int setexposure(struct gspca_dev *gspca_dev, static void setbrightcont(struct gspca_dev *gspca_dev) { struct sd *sd = (struct sd *) gspca_dev; - unsigned val; + int val; __u8 reg84_full[0x15]; - memset(reg84_full, 0, sizeof reg84_full); - val = sd->contrast * 0x20 / CONTRAST_MAX + 0x10; /* 10..30 */ - reg84_full[2] = val; - reg84_full[0] = (val + 1) / 2; - reg84_full[4] = (val + 1) / 5; - if (val > BRIGHTNESS_DEF) - val = (sd->brightness - BRIGHTNESS_DEF) * 0x20 + memcpy(reg84_full, reg84, sizeof reg84_full); + val = sd->contrast * 0x30 / CONTRAST_MAX + 0x10; /* 10..40 */ + reg84_full[0] = (val + 1) / 2; /* red */ + reg84_full[2] = val; /* green */ + reg84_full[4] = (val + 1) / 5; /* blue */ + val = (sd->brightness - BRIGHTNESS_DEF) * 0x10 / BRIGHTNESS_MAX; - else - val = 0; - reg84_full[0x12] = val; /* 00..1f */ + reg84_full[0x12] = val & 0x1f; /* 5:0 signed value */ reg_w(gspca_dev, 0x84, reg84_full, sizeof reg84_full); } -- cgit v0.10.2 From 695ebd125ade17101861c9eb99f74e6cc9a516ed Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Sat, 4 Oct 2008 14:18:37 -0300 Subject: V4L/DVB (9098): Whitespace cleanups Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/gspca/spca561.c b/drivers/media/video/gspca/spca561.c index 29089d9..020a03c 100644 --- a/drivers/media/video/gspca/spca561.c +++ b/drivers/media/video/gspca/spca561.c @@ -1066,7 +1066,7 @@ static struct ctrl sd_ctrls_12a[] = { { .id = V4L2_CID_DO_WHITE_BALANCE, .type = V4L2_CTRL_TYPE_INTEGER, - .name = "White Balance", + .name = "White Balance", .minimum = WHITE_MIN, .maximum = WHITE_MAX, .step = 1, -- cgit v0.10.2 From 2aa72f3b63e4b524e9e4b1438f6c0d50a214d836 Mon Sep 17 00:00:00 2001 From: Alexey Klimov Date: Wed, 1 Oct 2008 09:40:59 -0300 Subject: V4L/DVB (9101): radio-mr800: Add driver for AverMedia MR 800 USB FM radio devices This patch creates a new usb-radio driver, radio-mr800.c, that supports the AverMedia MR 800 USB FM radio devices. This device plugs into both the USB and an analog audio input, so this thing only deals with initialization and frequency setting, the audio data has to be handled by a sound driver. Signed-off-by: Alexey Klimov Signed-off-by: Douglas Schilling Landgraf Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/radio/Kconfig b/drivers/media/radio/Kconfig index 1b41b3f..e51d707 100644 --- a/drivers/media/radio/Kconfig +++ b/drivers/media/radio/Kconfig @@ -361,4 +361,16 @@ config USB_SI470X To compile this driver as a module, choose M here: the module will be called radio-silabs. +config USB_MR800 + tristate "AverMedia MR 800 USB FM radio support" + depends on USB && VIDEO_V4L2 + ---help--- + Say Y here if you want to connect this type of radio to your + computer's USB port. Note that the audio is not digital, and + you must connect the line out connector to a sound card or a + set of speakers. + + To compile this driver as a module, choose M here: the + module will be called radio-mr800. + endif # RADIO_ADAPTERS diff --git a/drivers/media/radio/Makefile b/drivers/media/radio/Makefile index 7ca71ab..240ec63c 100644 --- a/drivers/media/radio/Makefile +++ b/drivers/media/radio/Makefile @@ -18,5 +18,6 @@ obj-$(CONFIG_RADIO_TRUST) += radio-trust.o obj-$(CONFIG_RADIO_MAESTRO) += radio-maestro.o obj-$(CONFIG_USB_DSBR) += dsbr100.o obj-$(CONFIG_USB_SI470X) += radio-si470x.o +obj-$(CONFIG_USB_MR800) += radio-mr800.o EXTRA_CFLAGS += -Isound diff --git a/drivers/media/radio/radio-mr800.c b/drivers/media/radio/radio-mr800.c new file mode 100644 index 0000000..a33717c --- /dev/null +++ b/drivers/media/radio/radio-mr800.c @@ -0,0 +1,628 @@ +/* + * A driver for the AverMedia MR 800 USB FM radio. This device plugs + * into both the USB and an analog audio input, so this thing + * only deals with initialization and frequency setting, the + * audio data has to be handled by a sound driver. + * + * Copyright (c) 2008 Alexey Klimov + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +/* + * Big thanks to authors of dsbr100.c and radio-si470x.c + * + * When work was looked pretty good, i discover this: + * http://av-usbradio.sourceforge.net/index.php + * http://sourceforge.net/projects/av-usbradio/ + * Latest release of theirs project was in 2005. + * Probably, this driver could be improved trough using their + * achievements (specifications given). + * So, we have smth to begin with. + * + * History: + * Version 0.01: First working version. + * It's required to blacklist AverMedia USB Radio + * in usbhid/hid-quirks.c + * + * Many things to do: + * - Correct power managment of device (suspend & resume) + * - Make x86 independance (little-endian and big-endian stuff) + * - Add code for scanning and smooth tuning + * - Checked and add stereo&mono stuff + * - Add code for sensitivity value + * - Correct mistakes + * - In Japan another FREQ_MIN and FREQ_MAX + */ + +/* kernel includes */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include /* for KERNEL_VERSION MACRO */ + +/* driver and module definitions */ +#define DRIVER_AUTHOR "Alexey Klimov " +#define DRIVER_DESC "AverMedia MR 800 USB FM radio driver" +#define DRIVER_VERSION "0.01" +#define RADIO_VERSION KERNEL_VERSION(0, 0, 1) + +MODULE_AUTHOR(DRIVER_AUTHOR); +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_LICENSE("GPL"); + +#define USB_AMRADIO_VENDOR 0x07ca +#define USB_AMRADIO_PRODUCT 0xb800 + +/* Probably USB_TIMEOUT should be modified in module parameter */ +#define BUFFER_LENGTH 8 +#define USB_TIMEOUT 500 + +/* Frequency limits in MHz -- these are European values. For Japanese +devices, that would be 76 and 91. */ +#define FREQ_MIN 87.5 +#define FREQ_MAX 108.0 +#define FREQ_MUL 16000 + +/* module parameter */ +static int radio_nr = -1; +module_param(radio_nr, int, 0); +MODULE_PARM_DESC(radio_nr, "Radio Nr"); + +static struct v4l2_queryctrl radio_qctrl[] = { + { + .id = V4L2_CID_AUDIO_MUTE, + .name = "Mute", + .minimum = 0, + .maximum = 1, + .step = 1, + .default_value = 1, + .type = V4L2_CTRL_TYPE_BOOLEAN, + }, +/* HINT: the disabled controls are only here to satify kradio and such apps */ + { .id = V4L2_CID_AUDIO_VOLUME, + .flags = V4L2_CTRL_FLAG_DISABLED, + }, + { + .id = V4L2_CID_AUDIO_BALANCE, + .flags = V4L2_CTRL_FLAG_DISABLED, + }, + { + .id = V4L2_CID_AUDIO_BASS, + .flags = V4L2_CTRL_FLAG_DISABLED, + }, + { + .id = V4L2_CID_AUDIO_TREBLE, + .flags = V4L2_CTRL_FLAG_DISABLED, + }, + { + .id = V4L2_CID_AUDIO_LOUDNESS, + .flags = V4L2_CTRL_FLAG_DISABLED, + }, +}; + +static int usb_amradio_probe(struct usb_interface *intf, + const struct usb_device_id *id); +static void usb_amradio_disconnect(struct usb_interface *intf); +static int usb_amradio_open(struct inode *inode, struct file *file); +static int usb_amradio_close(struct inode *inode, struct file *file); +static int usb_amradio_suspend(struct usb_interface *intf, + pm_message_t message); +static int usb_amradio_resume(struct usb_interface *intf); + +/* Data for one (physical) device */ +struct amradio_device { + /* reference to USB and video device */ + struct usb_device *usbdev; + struct video_device *videodev; + + unsigned char *buffer; + struct mutex lock; /* buffer locking */ + int curfreq; + int stereo; + int users; + int removed; + int muted; +}; + +/* USB Device ID List */ +static struct usb_device_id usb_amradio_device_table[] = { + {USB_DEVICE_AND_INTERFACE_INFO(USB_AMRADIO_VENDOR, USB_AMRADIO_PRODUCT, + USB_CLASS_HID, 0, 0) }, + { } /* Terminating entry */ +}; + +MODULE_DEVICE_TABLE(usb, usb_amradio_device_table); + +/* USB subsystem interface */ +static struct usb_driver usb_amradio_driver = { + .name = "radio-mr800", + .probe = usb_amradio_probe, + .disconnect = usb_amradio_disconnect, + .suspend = usb_amradio_suspend, + .resume = usb_amradio_resume, + .reset_resume = usb_amradio_resume, + .id_table = usb_amradio_device_table, + .supports_autosuspend = 1, +}; + +/* switch on radio. Send 8 bytes to device. */ +static int amradio_start(struct amradio_device *radio) +{ + int retval; + int size; + + mutex_lock(&radio->lock); + + radio->buffer[0] = 0x00; + radio->buffer[1] = 0x55; + radio->buffer[2] = 0xaa; + radio->buffer[3] = 0x00; + radio->buffer[4] = 0xab; + radio->buffer[5] = 0x00; + radio->buffer[6] = 0x00; + radio->buffer[7] = 0x00; + + retval = usb_bulk_msg(radio->usbdev, usb_sndintpipe(radio->usbdev, 2), + (void *) (radio->buffer), BUFFER_LENGTH, &size, USB_TIMEOUT); + + if (retval) { + mutex_unlock(&radio->lock); + return retval; + } + + mutex_unlock(&radio->lock); + + radio->muted = 0; + + return retval; +} + +/* switch off radio */ +static int amradio_stop(struct amradio_device *radio) +{ + int retval; + int size; + + mutex_lock(&radio->lock); + + radio->buffer[0] = 0x00; + radio->buffer[1] = 0x55; + radio->buffer[2] = 0xaa; + radio->buffer[3] = 0x00; + radio->buffer[4] = 0xab; + radio->buffer[5] = 0x01; + radio->buffer[6] = 0x00; + radio->buffer[7] = 0x00; + + retval = usb_bulk_msg(radio->usbdev, usb_sndintpipe(radio->usbdev, 2), + (void *) (radio->buffer), BUFFER_LENGTH, &size, USB_TIMEOUT); + + if (retval) { + mutex_unlock(&radio->lock); + return retval; + } + + mutex_unlock(&radio->lock); + + radio->muted = 1; + + return retval; +} + +/* set a frequency, freq is defined by v4l's TUNER_LOW, i.e. 1/16th kHz */ +static int amradio_setfreq(struct amradio_device *radio, int freq) +{ + int retval; + int size; + unsigned short freq_send = 0x13 + (freq >> 3) / 25; + + mutex_lock(&radio->lock); + + radio->buffer[0] = 0x00; + radio->buffer[1] = 0x55; + radio->buffer[2] = 0xaa; + radio->buffer[3] = 0x03; + radio->buffer[4] = 0xa4; + radio->buffer[5] = 0x00; + radio->buffer[6] = 0x00; + radio->buffer[7] = 0x08; + + retval = usb_bulk_msg(radio->usbdev, usb_sndintpipe(radio->usbdev, 2), + (void *) (radio->buffer), BUFFER_LENGTH, &size, USB_TIMEOUT); + + if (retval) { + mutex_unlock(&radio->lock); + return retval; + } + + /* frequency is calculated from freq_send and placed in first 2 bytes */ + radio->buffer[0] = (freq_send >> 8) & 0xff; + radio->buffer[1] = freq_send & 0xff; + radio->buffer[2] = 0x01; + radio->buffer[3] = 0x00; + radio->buffer[4] = 0x00; + /* 5 and 6 bytes of buffer already = 0x00 */ + radio->buffer[7] = 0x00; + + retval = usb_bulk_msg(radio->usbdev, usb_sndintpipe(radio->usbdev, 2), + (void *) (radio->buffer), BUFFER_LENGTH, &size, USB_TIMEOUT); + + if (retval) { + mutex_unlock(&radio->lock); + return retval; + } + + mutex_unlock(&radio->lock); + + radio->stereo = 0; + + return retval; +} + +/* USB subsystem interface begins here */ + +/* handle unplugging of the device, release data structures +if nothing keeps us from doing it. If something is still +keeping us busy, the release callback of v4l will take care +of releasing it. */ +static void usb_amradio_disconnect(struct usb_interface *intf) +{ + struct amradio_device *radio = usb_get_intfdata(intf); + + usb_set_intfdata(intf, NULL); + + if (radio) { + video_unregister_device(radio->videodev); + radio->videodev = NULL; + if (radio->users) { + kfree(radio->buffer); + kfree(radio); + } else { + radio->removed = 1; + } + } +} + +/* vidioc_querycap - query device capabilities */ +static int vidioc_querycap(struct file *file, void *priv, + struct v4l2_capability *v) +{ + strlcpy(v->driver, "radio-mr800", sizeof(v->driver)); + strlcpy(v->card, "AverMedia MR 800 USB FM Radio", sizeof(v->card)); + sprintf(v->bus_info, "USB"); + v->version = RADIO_VERSION; + v->capabilities = V4L2_CAP_TUNER; + return 0; +} + +/* vidioc_g_tuner - get tuner attributes */ +static int vidioc_g_tuner(struct file *file, void *priv, + struct v4l2_tuner *v) +{ + struct amradio_device *radio = video_get_drvdata(video_devdata(file)); + + if (v->index > 0) + return -EINVAL; + +/* TODO: Add function which look is signal stereo or not + * amradio_getstat(radio); + */ + radio->stereo = -1; + strcpy(v->name, "FM"); + v->type = V4L2_TUNER_RADIO; + v->rangelow = FREQ_MIN * FREQ_MUL; + v->rangehigh = FREQ_MAX * FREQ_MUL; + v->rxsubchans = V4L2_TUNER_SUB_MONO | V4L2_TUNER_SUB_STEREO; + v->capability = V4L2_TUNER_CAP_LOW; + if (radio->stereo) + v->audmode = V4L2_TUNER_MODE_STEREO; + else + v->audmode = V4L2_TUNER_MODE_MONO; + v->signal = 0xffff; /* Can't get the signal strength, sad.. */ + v->afc = 0; /* Don't know what is this */ + return 0; +} + +/* vidioc_s_tuner - set tuner attributes */ +static int vidioc_s_tuner(struct file *file, void *priv, + struct v4l2_tuner *v) +{ + if (v->index > 0) + return -EINVAL; + return 0; +} + +/* vidioc_s_frequency - set tuner radio frequency */ +static int vidioc_s_frequency(struct file *file, void *priv, + struct v4l2_frequency *f) +{ + struct amradio_device *radio = video_get_drvdata(video_devdata(file)); + + radio->curfreq = f->frequency; + if (amradio_setfreq(radio, radio->curfreq) < 0) + warn("Set frequency failed"); + return 0; +} + +/* vidioc_g_frequency - get tuner radio frequency */ +static int vidioc_g_frequency(struct file *file, void *priv, + struct v4l2_frequency *f) +{ + struct amradio_device *radio = video_get_drvdata(video_devdata(file)); + + f->type = V4L2_TUNER_RADIO; + f->frequency = radio->curfreq; + return 0; +} + +/* vidioc_queryctrl - enumerate control items */ +static int vidioc_queryctrl(struct file *file, void *priv, + struct v4l2_queryctrl *qc) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(radio_qctrl); i++) { + if (qc->id && qc->id == radio_qctrl[i].id) { + memcpy(qc, &(radio_qctrl[i]), + sizeof(*qc)); + return 0; + } + } + return -EINVAL; +} + +/* vidioc_g_ctrl - get the value of a control */ +static int vidioc_g_ctrl(struct file *file, void *priv, + struct v4l2_control *ctrl) +{ + struct amradio_device *radio = video_get_drvdata(video_devdata(file)); + + switch (ctrl->id) { + case V4L2_CID_AUDIO_MUTE: + ctrl->value = radio->muted; + return 0; + } + return -EINVAL; +} + +/* vidioc_s_ctrl - set the value of a control */ +static int vidioc_s_ctrl(struct file *file, void *priv, + struct v4l2_control *ctrl) +{ + struct amradio_device *radio = video_get_drvdata(video_devdata(file)); + + switch (ctrl->id) { + case V4L2_CID_AUDIO_MUTE: + if (ctrl->value) { + if (amradio_stop(radio) < 0) { + warn("amradio_stop() failed"); + return -1; + } + } else { + if (amradio_start(radio) < 0) { + warn("amradio_start() failed"); + return -1; + } + } + return 0; + } + return -EINVAL; +} + +/* vidioc_g_audio - get audio attributes */ +static int vidioc_g_audio(struct file *file, void *priv, + struct v4l2_audio *a) +{ + if (a->index > 1) + return -EINVAL; + + strcpy(a->name, "Radio"); + a->capability = V4L2_AUDCAP_STEREO; + return 0; +} + +/* vidioc_s_audio - set audio attributes */ +static int vidioc_s_audio(struct file *file, void *priv, + struct v4l2_audio *a) +{ + if (a->index != 0) + return -EINVAL; + return 0; +} + +/* vidioc_g_input - get input */ +static int vidioc_g_input(struct file *filp, void *priv, unsigned int *i) +{ + *i = 0; + return 0; +} + +/* vidioc_s_input - set input */ +static int vidioc_s_input(struct file *filp, void *priv, unsigned int i) +{ + if (i != 0) + return -EINVAL; + return 0; +} + +/* open device - amradio_start() and amradio_setfreq() */ +static int usb_amradio_open(struct inode *inode, struct file *file) +{ + struct amradio_device *radio = video_get_drvdata(video_devdata(file)); + + radio->users = 1; + radio->muted = 1; + + if (amradio_start(radio) < 0) { + warn("Radio did not start up properly"); + radio->users = 0; + return -EIO; + } + if (amradio_setfreq(radio, radio->curfreq) < 0) + warn("Set frequency failed"); + return 0; +} + +/*close device - free driver structures */ +static int usb_amradio_close(struct inode *inode, struct file *file) +{ + struct amradio_device *radio = video_get_drvdata(video_devdata(file)); + + if (!radio) + return -ENODEV; + radio->users = 0; + if (radio->removed) { + kfree(radio->buffer); + kfree(radio); + } + return 0; +} + +/* Suspend device - stop device. Need to be checked and fixed */ +static int usb_amradio_suspend(struct usb_interface *intf, pm_message_t message) +{ + struct amradio_device *radio = usb_get_intfdata(intf); + + if (amradio_stop(radio) < 0) + warn("amradio_stop() failed"); + + info("radio-mr800: Going into suspend.."); + + return 0; +} + +/* Resume device - start device. Need to be checked and fixed */ +static int usb_amradio_resume(struct usb_interface *intf) +{ + struct amradio_device *radio = usb_get_intfdata(intf); + + if (amradio_start(radio) < 0) + warn("amradio_start() failed"); + + info("radio-mr800: Coming out of suspend.."); + + return 0; +} + +/* File system interface */ +static const struct file_operations usb_amradio_fops = { + .owner = THIS_MODULE, + .open = usb_amradio_open, + .release = usb_amradio_close, + .ioctl = video_ioctl2, +#ifdef CONFIG_COMPAT + .compat_ioctl = v4l_compat_ioctl32, +#endif + .llseek = no_llseek, +}; + +static const struct v4l2_ioctl_ops usb_amradio_ioctl_ops = { + .vidioc_querycap = vidioc_querycap, + .vidioc_g_tuner = vidioc_g_tuner, + .vidioc_s_tuner = vidioc_s_tuner, + .vidioc_g_frequency = vidioc_g_frequency, + .vidioc_s_frequency = vidioc_s_frequency, + .vidioc_queryctrl = vidioc_queryctrl, + .vidioc_g_ctrl = vidioc_g_ctrl, + .vidioc_s_ctrl = vidioc_s_ctrl, + .vidioc_g_audio = vidioc_g_audio, + .vidioc_s_audio = vidioc_s_audio, + .vidioc_g_input = vidioc_g_input, + .vidioc_s_input = vidioc_s_input, +}; + +/* V4L2 interface */ +static struct video_device amradio_videodev_template = { + .name = "AverMedia MR 800 USB FM Radio", + .fops = &usb_amradio_fops, + .ioctl_ops = &usb_amradio_ioctl_ops, + .release = video_device_release, +}; + +/* check if the device is present and register with v4l and +usb if it is */ +static int usb_amradio_probe(struct usb_interface *intf, + const struct usb_device_id *id) +{ + struct amradio_device *radio; + + radio = kmalloc(sizeof(struct amradio_device), GFP_KERNEL); + + if (!(radio)) + return -ENOMEM; + + radio->buffer = kmalloc(BUFFER_LENGTH, GFP_KERNEL); + + if (!(radio->buffer)) { + kfree(radio); + return -ENOMEM; + } + + radio->videodev = video_device_alloc(); + + if (!(radio->videodev)) { + kfree(radio->buffer); + kfree(radio); + return -ENOMEM; + } + + memcpy(radio->videodev, &amradio_videodev_template, + sizeof(amradio_videodev_template)); + + radio->removed = 0; + radio->users = 0; + radio->usbdev = interface_to_usbdev(intf); + radio->curfreq = 95.16 * FREQ_MUL; + + mutex_init(&radio->lock); + + video_set_drvdata(radio->videodev, radio); + if (video_register_device(radio->videodev, VFL_TYPE_RADIO, radio_nr)) { + warn("Could not register video device"); + video_device_release(radio->videodev); + kfree(radio->buffer); + kfree(radio); + return -EIO; + } + + usb_set_intfdata(intf, radio); + return 0; +} + +static int __init amradio_init(void) +{ + int retval = usb_register(&usb_amradio_driver); + + info(DRIVER_VERSION " " DRIVER_DESC); + if (retval) + err("usb_register failed. Error number %d", retval); + return retval; +} + +static void __exit amradio_exit(void) +{ + usb_deregister(&usb_amradio_driver); +} + +module_init(amradio_init); +module_exit(amradio_exit); + -- cgit v0.10.2 From 07c6bb9e6e5c9b8d0f697493cdd3978fc193ca90 Mon Sep 17 00:00:00 2001 From: Janne Grunau Date: Tue, 30 Sep 2008 13:57:42 -0300 Subject: V4L/DVB (9105): correct Makefile symbol for stv0288 frontend Signed-off-by: Janne Grunau Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/dvb/frontends/Makefile b/drivers/media/dvb/frontends/Makefile index 491eb5c..aba79f4 100644 --- a/drivers/media/dvb/frontends/Makefile +++ b/drivers/media/dvb/frontends/Makefile @@ -53,5 +53,5 @@ obj-$(CONFIG_DVB_DUMMY_FE) += dvb_dummy_fe.o obj-$(CONFIG_DVB_AF9013) += af9013.o obj-$(CONFIG_DVB_CX24116) += cx24116.o obj-$(CONFIG_DVB_SI21XX) += si21xx.o -obj-$(CONFIG_DVB_STV0299) += stv0288.o +obj-$(CONFIG_DVB_STV0288) += stv0288.o obj-$(CONFIG_DVB_STB6000) += stb6000.o -- cgit v0.10.2 From 986bd1e58b18c09b753f797df19251804bfe3e84 Mon Sep 17 00:00:00 2001 From: Tomi Orava Date: Fri, 19 Sep 2008 00:48:31 -0300 Subject: V4L/DVB (9107): Alternative version of Terratec Cinergy T2 driver Alternative version of the Terratec Cinergy T2 driver that uses the dvb framework. Signed-off-by: Tomi Orava Signed-off-by: Thierry MERLE [mchehab@redhat.com: fix dvb Makefile] Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/dvb/Kconfig b/drivers/media/dvb/Kconfig index 14488f6..0bcd852 100644 --- a/drivers/media/dvb/Kconfig +++ b/drivers/media/dvb/Kconfig @@ -20,7 +20,6 @@ comment "Supported USB Adapters" source "drivers/media/dvb/dvb-usb/Kconfig" source "drivers/media/dvb/ttusb-budget/Kconfig" source "drivers/media/dvb/ttusb-dec/Kconfig" -source "drivers/media/dvb/cinergyT2/Kconfig" source "drivers/media/dvb/siano/Kconfig" comment "Supported FlexCopII (B2C2) Adapters" diff --git a/drivers/media/dvb/Makefile b/drivers/media/dvb/Makefile index ea953a0..f91e9eb 100644 --- a/drivers/media/dvb/Makefile +++ b/drivers/media/dvb/Makefile @@ -2,4 +2,4 @@ # Makefile for the kernel multimedia device drivers. # -obj-y := dvb-core/ frontends/ ttpci/ ttusb-dec/ ttusb-budget/ b2c2/ bt8xx/ cinergyT2/ dvb-usb/ pluto2/ siano/ dm1105/ +obj-y := dvb-core/ frontends/ ttpci/ ttusb-dec/ ttusb-budget/ b2c2/ bt8xx/ dvb-usb/ pluto2/ siano/ dm1105/ diff --git a/drivers/media/dvb/cinergyT2/Kconfig b/drivers/media/dvb/cinergyT2/Kconfig deleted file mode 100644 index c03513b..0000000 --- a/drivers/media/dvb/cinergyT2/Kconfig +++ /dev/null @@ -1,85 +0,0 @@ -config DVB_CINERGYT2 - tristate "Terratec CinergyT2/qanu USB2 DVB-T receiver" - depends on DVB_CORE && USB && INPUT - help - Support for "TerraTec CinergyT2" USB2.0 Highspeed DVB Receivers - - Say Y if you own such a device and want to use it. - - -config DVB_CINERGYT2_TUNING - bool "sophisticated fine-tuning for CinergyT2 cards" - depends on DVB_CINERGYT2 - help - Here you can fine-tune some parameters of the CinergyT2 driver. - - Normally you don't need to touch this, but in exotic setups you - may fine-tune your setup and adjust e.g. DMA buffer sizes for - a particular application. - - -config DVB_CINERGYT2_STREAM_URB_COUNT - int "Number of queued USB Request Blocks for Highspeed Stream Transfers" - depends on DVB_CINERGYT2_TUNING - default "32" - help - USB Request Blocks for Highspeed Stream transfers are scheduled in - a queue for the Host Controller. - - Usually the default value is a safe choice. - - You may increase this number if you are using this device in a - Server Environment with many high-traffic USB Highspeed devices - sharing the same USB bus. - - -config DVB_CINERGYT2_STREAM_BUF_SIZE - int "Size of URB Stream Buffers for Highspeed Transfers" - depends on DVB_CINERGYT2_TUNING - default "512" - help - Should be a multiple of native buffer size of 512 bytes. - Default value is a safe choice. - - You may increase this number if you are using this device in a - Server Environment with many high-traffic USB Highspeed devices - sharing the same USB bus. - - -config DVB_CINERGYT2_QUERY_INTERVAL - int "Status update interval [milliseconds]" - depends on DVB_CINERGYT2_TUNING - default "250" - help - This is the interval for status readouts from the demodulator. - You may try lower values if you need more responsive signal quality - measurements. - - Please keep in mind that these updates cause traffic on the tuner - control bus and thus may or may not affect reception sensitivity. - - The default value should be a safe choice for common applications. - - -config DVB_CINERGYT2_ENABLE_RC_INPUT_DEVICE - bool "Register the onboard IR Remote Control Receiver as Input Device" - depends on DVB_CINERGYT2_TUNING - default y - help - Enable this option if you want to use the onboard Infrared Remote - Control Receiver as Linux-Input device. - - Right now only the keycode table for the default Remote Control - delivered with the device is supported, please see the driver - source code to find out how to add support for other controls. - - -config DVB_CINERGYT2_RC_QUERY_INTERVAL - int "Infrared Remote Controller update interval [milliseconds]" - depends on DVB_CINERGYT2_TUNING && DVB_CINERGYT2_ENABLE_RC_INPUT_DEVICE - default "50" - help - If you have a very fast-repeating remote control you can try lower - values, for normal consumer receivers the default value should be - a safe choice. - diff --git a/drivers/media/dvb/cinergyT2/Makefile b/drivers/media/dvb/cinergyT2/Makefile deleted file mode 100644 index d762d8c..0000000 --- a/drivers/media/dvb/cinergyT2/Makefile +++ /dev/null @@ -1,3 +0,0 @@ -obj-$(CONFIG_DVB_CINERGYT2) += cinergyT2.o - -EXTRA_CFLAGS += -Idrivers/media/dvb/dvb-core/ diff --git a/drivers/media/dvb/cinergyT2/cinergyT2.c b/drivers/media/dvb/cinergyT2/cinergyT2.c deleted file mode 100644 index a824f37..0000000 --- a/drivers/media/dvb/cinergyT2/cinergyT2.c +++ /dev/null @@ -1,1105 +0,0 @@ -/* - * TerraTec Cinergy T²/qanu USB2 DVB-T adapter. - * - * Copyright (C) 2004 Daniel Mack and - * Holger Waechtler - * - * Protocol Spec published on http://qanu.de/specs/terratec_cinergyT2.pdf - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - * - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include "dmxdev.h" -#include "dvb_demux.h" -#include "dvb_net.h" - -#ifdef CONFIG_DVB_CINERGYT2_TUNING - #define STREAM_URB_COUNT (CONFIG_DVB_CINERGYT2_STREAM_URB_COUNT) - #define STREAM_BUF_SIZE (CONFIG_DVB_CINERGYT2_STREAM_BUF_SIZE) - #define QUERY_INTERVAL (CONFIG_DVB_CINERGYT2_QUERY_INTERVAL) - #ifdef CONFIG_DVB_CINERGYT2_ENABLE_RC_INPUT_DEVICE - #define RC_QUERY_INTERVAL (CONFIG_DVB_CINERGYT2_RC_QUERY_INTERVAL) - #define ENABLE_RC (1) - #endif -#else - #define STREAM_URB_COUNT (32) - #define STREAM_BUF_SIZE (512) /* bytes */ - #define ENABLE_RC (1) - #define RC_QUERY_INTERVAL (50) /* milliseconds */ - #define QUERY_INTERVAL (333) /* milliseconds */ -#endif - -#define DRIVER_NAME "TerraTec/qanu USB2.0 Highspeed DVB-T Receiver" - -static int debug; -module_param_named(debug, debug, int, 0644); -MODULE_PARM_DESC(debug, "Turn on/off debugging (default:off)."); - -DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); - -#define dprintk(level, args...) \ -do { \ - if ((debug & level)) { \ - printk("%s: %s(): ", KBUILD_MODNAME, \ - __func__); \ - printk(args); } \ -} while (0) - -enum cinergyt2_ep1_cmd { - CINERGYT2_EP1_PID_TABLE_RESET = 0x01, - CINERGYT2_EP1_PID_SETUP = 0x02, - CINERGYT2_EP1_CONTROL_STREAM_TRANSFER = 0x03, - CINERGYT2_EP1_SET_TUNER_PARAMETERS = 0x04, - CINERGYT2_EP1_GET_TUNER_STATUS = 0x05, - CINERGYT2_EP1_START_SCAN = 0x06, - CINERGYT2_EP1_CONTINUE_SCAN = 0x07, - CINERGYT2_EP1_GET_RC_EVENTS = 0x08, - CINERGYT2_EP1_SLEEP_MODE = 0x09 -}; - -struct dvbt_set_parameters_msg { - uint8_t cmd; - __le32 freq; - uint8_t bandwidth; - __le16 tps; - uint8_t flags; -} __attribute__((packed)); - -struct dvbt_get_status_msg { - __le32 freq; - uint8_t bandwidth; - __le16 tps; - uint8_t flags; - __le16 gain; - uint8_t snr; - __le32 viterbi_error_rate; - __le32 rs_error_rate; - __le32 uncorrected_block_count; - uint8_t lock_bits; - uint8_t prev_lock_bits; -} __attribute__((packed)); - -static struct dvb_frontend_info cinergyt2_fe_info = { - .name = DRIVER_NAME, - .type = FE_OFDM, - .frequency_min = 174000000, - .frequency_max = 862000000, - .frequency_stepsize = 166667, - .caps = FE_CAN_INVERSION_AUTO | FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | - FE_CAN_FEC_3_4 | FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 | - FE_CAN_FEC_AUTO | - FE_CAN_QPSK | FE_CAN_QAM_16 | FE_CAN_QAM_64 | FE_CAN_QAM_AUTO | - FE_CAN_TRANSMISSION_MODE_AUTO | FE_CAN_GUARD_INTERVAL_AUTO | - FE_CAN_HIERARCHY_AUTO | FE_CAN_RECOVER | FE_CAN_MUTE_TS -}; - -struct cinergyt2 { - struct dvb_demux demux; - struct usb_device *udev; - struct mutex sem; - struct mutex wq_sem; - struct dvb_adapter adapter; - struct dvb_device *fedev; - struct dmxdev dmxdev; - struct dvb_net dvbnet; - - int streaming; - int sleeping; - - struct dvbt_set_parameters_msg param; - struct dvbt_get_status_msg status; - struct delayed_work query_work; - - wait_queue_head_t poll_wq; - int pending_fe_events; - int disconnect_pending; - unsigned int uncorrected_block_count; - atomic_t inuse; - - void *streambuf; - dma_addr_t streambuf_dmahandle; - struct urb *stream_urb [STREAM_URB_COUNT]; - -#ifdef ENABLE_RC - struct input_dev *rc_input_dev; - char phys[64]; - struct delayed_work rc_query_work; - int rc_input_event; - __le32 rc_last_code; - unsigned long last_event_jiffies; -#endif -}; - -enum { - CINERGYT2_RC_EVENT_TYPE_NONE = 0x00, - CINERGYT2_RC_EVENT_TYPE_NEC = 0x01, - CINERGYT2_RC_EVENT_TYPE_RC5 = 0x02 -}; - -struct cinergyt2_rc_event { - char type; - __le32 value; -} __attribute__((packed)); - -static const uint32_t rc_keys[] = { - CINERGYT2_RC_EVENT_TYPE_NEC, 0xfe01eb04, KEY_POWER, - CINERGYT2_RC_EVENT_TYPE_NEC, 0xfd02eb04, KEY_1, - CINERGYT2_RC_EVENT_TYPE_NEC, 0xfc03eb04, KEY_2, - CINERGYT2_RC_EVENT_TYPE_NEC, 0xfb04eb04, KEY_3, - CINERGYT2_RC_EVENT_TYPE_NEC, 0xfa05eb04, KEY_4, - CINERGYT2_RC_EVENT_TYPE_NEC, 0xf906eb04, KEY_5, - CINERGYT2_RC_EVENT_TYPE_NEC, 0xf807eb04, KEY_6, - CINERGYT2_RC_EVENT_TYPE_NEC, 0xf708eb04, KEY_7, - CINERGYT2_RC_EVENT_TYPE_NEC, 0xf609eb04, KEY_8, - CINERGYT2_RC_EVENT_TYPE_NEC, 0xf50aeb04, KEY_9, - CINERGYT2_RC_EVENT_TYPE_NEC, 0xf30ceb04, KEY_0, - CINERGYT2_RC_EVENT_TYPE_NEC, 0xf40beb04, KEY_VIDEO, - CINERGYT2_RC_EVENT_TYPE_NEC, 0xf20deb04, KEY_REFRESH, - CINERGYT2_RC_EVENT_TYPE_NEC, 0xf10eeb04, KEY_SELECT, - CINERGYT2_RC_EVENT_TYPE_NEC, 0xf00feb04, KEY_EPG, - CINERGYT2_RC_EVENT_TYPE_NEC, 0xef10eb04, KEY_UP, - CINERGYT2_RC_EVENT_TYPE_NEC, 0xeb14eb04, KEY_DOWN, - CINERGYT2_RC_EVENT_TYPE_NEC, 0xee11eb04, KEY_LEFT, - CINERGYT2_RC_EVENT_TYPE_NEC, 0xec13eb04, KEY_RIGHT, - CINERGYT2_RC_EVENT_TYPE_NEC, 0xed12eb04, KEY_OK, - CINERGYT2_RC_EVENT_TYPE_NEC, 0xea15eb04, KEY_TEXT, - CINERGYT2_RC_EVENT_TYPE_NEC, 0xe916eb04, KEY_INFO, - CINERGYT2_RC_EVENT_TYPE_NEC, 0xe817eb04, KEY_RED, - CINERGYT2_RC_EVENT_TYPE_NEC, 0xe718eb04, KEY_GREEN, - CINERGYT2_RC_EVENT_TYPE_NEC, 0xe619eb04, KEY_YELLOW, - CINERGYT2_RC_EVENT_TYPE_NEC, 0xe51aeb04, KEY_BLUE, - CINERGYT2_RC_EVENT_TYPE_NEC, 0xe31ceb04, KEY_VOLUMEUP, - CINERGYT2_RC_EVENT_TYPE_NEC, 0xe11eeb04, KEY_VOLUMEDOWN, - CINERGYT2_RC_EVENT_TYPE_NEC, 0xe21deb04, KEY_MUTE, - CINERGYT2_RC_EVENT_TYPE_NEC, 0xe41beb04, KEY_CHANNELUP, - CINERGYT2_RC_EVENT_TYPE_NEC, 0xe01feb04, KEY_CHANNELDOWN, - CINERGYT2_RC_EVENT_TYPE_NEC, 0xbf40eb04, KEY_PAUSE, - CINERGYT2_RC_EVENT_TYPE_NEC, 0xb34ceb04, KEY_PLAY, - CINERGYT2_RC_EVENT_TYPE_NEC, 0xa758eb04, KEY_RECORD, - CINERGYT2_RC_EVENT_TYPE_NEC, 0xab54eb04, KEY_PREVIOUS, - CINERGYT2_RC_EVENT_TYPE_NEC, 0xb748eb04, KEY_STOP, - CINERGYT2_RC_EVENT_TYPE_NEC, 0xa35ceb04, KEY_NEXT -}; - -static int cinergyt2_command (struct cinergyt2 *cinergyt2, - char *send_buf, int send_buf_len, - char *recv_buf, int recv_buf_len) -{ - int actual_len; - char dummy; - int ret; - - ret = usb_bulk_msg(cinergyt2->udev, usb_sndbulkpipe(cinergyt2->udev, 1), - send_buf, send_buf_len, &actual_len, 1000); - - if (ret) - dprintk(1, "usb_bulk_msg (send) failed, err %i\n", ret); - - if (!recv_buf) - recv_buf = &dummy; - - ret = usb_bulk_msg(cinergyt2->udev, usb_rcvbulkpipe(cinergyt2->udev, 1), - recv_buf, recv_buf_len, &actual_len, 1000); - - if (ret) - dprintk(1, "usb_bulk_msg (read) failed, err %i\n", ret); - - return ret ? ret : actual_len; -} - -static void cinergyt2_control_stream_transfer (struct cinergyt2 *cinergyt2, int enable) -{ - char buf [] = { CINERGYT2_EP1_CONTROL_STREAM_TRANSFER, enable ? 1 : 0 }; - cinergyt2_command(cinergyt2, buf, sizeof(buf), NULL, 0); -} - -static void cinergyt2_sleep (struct cinergyt2 *cinergyt2, int sleep) -{ - char buf [] = { CINERGYT2_EP1_SLEEP_MODE, sleep ? 1 : 0 }; - cinergyt2_command(cinergyt2, buf, sizeof(buf), NULL, 0); - cinergyt2->sleeping = sleep; -} - -static void cinergyt2_stream_irq (struct urb *urb); - -static int cinergyt2_submit_stream_urb (struct cinergyt2 *cinergyt2, struct urb *urb) -{ - int err; - - usb_fill_bulk_urb(urb, - cinergyt2->udev, - usb_rcvbulkpipe(cinergyt2->udev, 0x2), - urb->transfer_buffer, - STREAM_BUF_SIZE, - cinergyt2_stream_irq, - cinergyt2); - - if ((err = usb_submit_urb(urb, GFP_ATOMIC))) - dprintk(1, "urb submission failed (err = %i)!\n", err); - - return err; -} - -static void cinergyt2_stream_irq (struct urb *urb) -{ - struct cinergyt2 *cinergyt2 = urb->context; - - if (urb->actual_length > 0) - dvb_dmx_swfilter(&cinergyt2->demux, - urb->transfer_buffer, urb->actual_length); - - if (cinergyt2->streaming) - cinergyt2_submit_stream_urb(cinergyt2, urb); -} - -static void cinergyt2_free_stream_urbs (struct cinergyt2 *cinergyt2) -{ - int i; - - for (i=0; istream_urb[i]); - - usb_buffer_free(cinergyt2->udev, STREAM_URB_COUNT*STREAM_BUF_SIZE, - cinergyt2->streambuf, cinergyt2->streambuf_dmahandle); -} - -static int cinergyt2_alloc_stream_urbs (struct cinergyt2 *cinergyt2) -{ - int i; - - cinergyt2->streambuf = usb_buffer_alloc(cinergyt2->udev, STREAM_URB_COUNT*STREAM_BUF_SIZE, - GFP_KERNEL, &cinergyt2->streambuf_dmahandle); - if (!cinergyt2->streambuf) { - dprintk(1, "failed to alloc consistent stream memory area, bailing out!\n"); - return -ENOMEM; - } - - memset(cinergyt2->streambuf, 0, STREAM_URB_COUNT*STREAM_BUF_SIZE); - - for (i=0; itransfer_buffer = cinergyt2->streambuf + i * STREAM_BUF_SIZE; - urb->transfer_buffer_length = STREAM_BUF_SIZE; - - cinergyt2->stream_urb[i] = urb; - } - - return 0; -} - -static void cinergyt2_stop_stream_xfer (struct cinergyt2 *cinergyt2) -{ - int i; - - cinergyt2_control_stream_transfer(cinergyt2, 0); - - for (i=0; istream_urb[i]); -} - -static int cinergyt2_start_stream_xfer (struct cinergyt2 *cinergyt2) -{ - int i, err; - - for (i=0; istream_urb[i]))) { - cinergyt2_stop_stream_xfer(cinergyt2); - dprintk(1, "failed urb submission (%i: err = %i)!\n", i, err); - return err; - } - } - - cinergyt2_control_stream_transfer(cinergyt2, 1); - return 0; -} - -static int cinergyt2_start_feed(struct dvb_demux_feed *dvbdmxfeed) -{ - struct dvb_demux *demux = dvbdmxfeed->demux; - struct cinergyt2 *cinergyt2 = demux->priv; - - if (cinergyt2->disconnect_pending) - return -EAGAIN; - if (mutex_lock_interruptible(&cinergyt2->sem)) - return -ERESTARTSYS; - - if (cinergyt2->streaming == 0) - cinergyt2_start_stream_xfer(cinergyt2); - - cinergyt2->streaming++; - mutex_unlock(&cinergyt2->sem); - return 0; -} - -static int cinergyt2_stop_feed(struct dvb_demux_feed *dvbdmxfeed) -{ - struct dvb_demux *demux = dvbdmxfeed->demux; - struct cinergyt2 *cinergyt2 = demux->priv; - - if (cinergyt2->disconnect_pending) - return -EAGAIN; - if (mutex_lock_interruptible(&cinergyt2->sem)) - return -ERESTARTSYS; - - if (--cinergyt2->streaming == 0) - cinergyt2_stop_stream_xfer(cinergyt2); - - mutex_unlock(&cinergyt2->sem); - return 0; -} - -/** - * convert linux-dvb frontend parameter set into TPS. - * See ETSI ETS-300744, section 4.6.2, table 9 for details. - * - * This function is probably reusable and may better get placed in a support - * library. - * - * We replace errornous fields by default TPS fields (the ones with value 0). - */ -static uint16_t compute_tps (struct dvb_frontend_parameters *p) -{ - struct dvb_ofdm_parameters *op = &p->u.ofdm; - uint16_t tps = 0; - - switch (op->code_rate_HP) { - case FEC_2_3: - tps |= (1 << 7); - break; - case FEC_3_4: - tps |= (2 << 7); - break; - case FEC_5_6: - tps |= (3 << 7); - break; - case FEC_7_8: - tps |= (4 << 7); - break; - case FEC_1_2: - case FEC_AUTO: - default: - /* tps |= (0 << 7) */; - } - - switch (op->code_rate_LP) { - case FEC_2_3: - tps |= (1 << 4); - break; - case FEC_3_4: - tps |= (2 << 4); - break; - case FEC_5_6: - tps |= (3 << 4); - break; - case FEC_7_8: - tps |= (4 << 4); - break; - case FEC_1_2: - case FEC_AUTO: - default: - /* tps |= (0 << 4) */; - } - - switch (op->constellation) { - case QAM_16: - tps |= (1 << 13); - break; - case QAM_64: - tps |= (2 << 13); - break; - case QPSK: - default: - /* tps |= (0 << 13) */; - } - - switch (op->transmission_mode) { - case TRANSMISSION_MODE_8K: - tps |= (1 << 0); - break; - case TRANSMISSION_MODE_2K: - default: - /* tps |= (0 << 0) */; - } - - switch (op->guard_interval) { - case GUARD_INTERVAL_1_16: - tps |= (1 << 2); - break; - case GUARD_INTERVAL_1_8: - tps |= (2 << 2); - break; - case GUARD_INTERVAL_1_4: - tps |= (3 << 2); - break; - case GUARD_INTERVAL_1_32: - default: - /* tps |= (0 << 2) */; - } - - switch (op->hierarchy_information) { - case HIERARCHY_1: - tps |= (1 << 10); - break; - case HIERARCHY_2: - tps |= (2 << 10); - break; - case HIERARCHY_4: - tps |= (3 << 10); - break; - case HIERARCHY_NONE: - default: - /* tps |= (0 << 10) */; - } - - return tps; -} - -static int cinergyt2_open (struct inode *inode, struct file *file) -{ - struct dvb_device *dvbdev = file->private_data; - struct cinergyt2 *cinergyt2 = dvbdev->priv; - int err = -EAGAIN; - - if (cinergyt2->disconnect_pending) - goto out; - err = mutex_lock_interruptible(&cinergyt2->wq_sem); - if (err) - goto out; - - err = mutex_lock_interruptible(&cinergyt2->sem); - if (err) - goto out_unlock1; - - if ((err = dvb_generic_open(inode, file))) - goto out_unlock2; - - if ((file->f_flags & O_ACCMODE) != O_RDONLY) { - cinergyt2_sleep(cinergyt2, 0); - schedule_delayed_work(&cinergyt2->query_work, HZ/2); - } - - atomic_inc(&cinergyt2->inuse); - -out_unlock2: - mutex_unlock(&cinergyt2->sem); -out_unlock1: - mutex_unlock(&cinergyt2->wq_sem); -out: - return err; -} - -static void cinergyt2_unregister(struct cinergyt2 *cinergyt2) -{ - dvb_net_release(&cinergyt2->dvbnet); - dvb_dmxdev_release(&cinergyt2->dmxdev); - dvb_dmx_release(&cinergyt2->demux); - dvb_unregister_device(cinergyt2->fedev); - dvb_unregister_adapter(&cinergyt2->adapter); - - cinergyt2_free_stream_urbs(cinergyt2); - kfree(cinergyt2); -} - -static int cinergyt2_release (struct inode *inode, struct file *file) -{ - struct dvb_device *dvbdev = file->private_data; - struct cinergyt2 *cinergyt2 = dvbdev->priv; - - mutex_lock(&cinergyt2->wq_sem); - - if (!cinergyt2->disconnect_pending && (file->f_flags & O_ACCMODE) != O_RDONLY) { - cancel_rearming_delayed_work(&cinergyt2->query_work); - - mutex_lock(&cinergyt2->sem); - cinergyt2_sleep(cinergyt2, 1); - mutex_unlock(&cinergyt2->sem); - } - - mutex_unlock(&cinergyt2->wq_sem); - - if (atomic_dec_and_test(&cinergyt2->inuse) && cinergyt2->disconnect_pending) { - warn("delayed unregister in release"); - cinergyt2_unregister(cinergyt2); - } - - return dvb_generic_release(inode, file); -} - -static unsigned int cinergyt2_poll (struct file *file, struct poll_table_struct *wait) -{ - struct dvb_device *dvbdev = file->private_data; - struct cinergyt2 *cinergyt2 = dvbdev->priv; - unsigned int mask = 0; - - if (cinergyt2->disconnect_pending) - return -EAGAIN; - if (mutex_lock_interruptible(&cinergyt2->sem)) - return -ERESTARTSYS; - - poll_wait(file, &cinergyt2->poll_wq, wait); - - if (cinergyt2->pending_fe_events != 0) - mask |= (POLLIN | POLLRDNORM | POLLPRI); - - mutex_unlock(&cinergyt2->sem); - - return mask; -} - - -static int cinergyt2_ioctl (struct inode *inode, struct file *file, - unsigned cmd, unsigned long arg) -{ - struct dvb_device *dvbdev = file->private_data; - struct cinergyt2 *cinergyt2 = dvbdev->priv; - struct dvbt_get_status_msg *stat = &cinergyt2->status; - fe_status_t status = 0; - - switch (cmd) { - case FE_GET_INFO: - return copy_to_user((void __user*) arg, &cinergyt2_fe_info, - sizeof(struct dvb_frontend_info)); - - case FE_READ_STATUS: - if (0xffff - le16_to_cpu(stat->gain) > 30) - status |= FE_HAS_SIGNAL; - if (stat->lock_bits & (1 << 6)) - status |= FE_HAS_LOCK; - if (stat->lock_bits & (1 << 5)) - status |= FE_HAS_SYNC; - if (stat->lock_bits & (1 << 4)) - status |= FE_HAS_CARRIER; - if (stat->lock_bits & (1 << 1)) - status |= FE_HAS_VITERBI; - - return copy_to_user((void __user*) arg, &status, sizeof(status)); - - case FE_READ_BER: - return put_user(le32_to_cpu(stat->viterbi_error_rate), - (__u32 __user *) arg); - - case FE_READ_SIGNAL_STRENGTH: - return put_user(0xffff - le16_to_cpu(stat->gain), - (__u16 __user *) arg); - - case FE_READ_SNR: - return put_user((stat->snr << 8) | stat->snr, - (__u16 __user *) arg); - - case FE_READ_UNCORRECTED_BLOCKS: - { - uint32_t unc_count; - - if (mutex_lock_interruptible(&cinergyt2->sem)) - return -ERESTARTSYS; - unc_count = cinergyt2->uncorrected_block_count; - cinergyt2->uncorrected_block_count = 0; - mutex_unlock(&cinergyt2->sem); - - /* UNC are already converted to host byte order... */ - return put_user(unc_count,(__u32 __user *) arg); - } - case FE_SET_FRONTEND: - { - struct dvbt_set_parameters_msg *param = &cinergyt2->param; - struct dvb_frontend_parameters p; - int err; - - if ((file->f_flags & O_ACCMODE) == O_RDONLY) - return -EPERM; - - if (copy_from_user(&p, (void __user*) arg, sizeof(p))) - return -EFAULT; - - if (cinergyt2->disconnect_pending) - return -EAGAIN; - if (mutex_lock_interruptible(&cinergyt2->sem)) - return -ERESTARTSYS; - - param->cmd = CINERGYT2_EP1_SET_TUNER_PARAMETERS; - param->tps = cpu_to_le16(compute_tps(&p)); - param->freq = cpu_to_le32(p.frequency / 1000); - param->bandwidth = 8 - p.u.ofdm.bandwidth - BANDWIDTH_8_MHZ; - - stat->lock_bits = 0; - cinergyt2->pending_fe_events++; - wake_up_interruptible(&cinergyt2->poll_wq); - - err = cinergyt2_command(cinergyt2, - (char *) param, sizeof(*param), - NULL, 0); - - mutex_unlock(&cinergyt2->sem); - - return (err < 0) ? err : 0; - } - - case FE_GET_FRONTEND: - /** - * trivial to implement (see struct dvbt_get_status_msg). - * equivalent to FE_READ ioctls, but needs - * TPS -> linux-dvb parameter set conversion. Feel free - * to implement this and send us a patch if you need this - * functionality. - */ - break; - - case FE_GET_EVENT: - { - /** - * for now we only fill the status field. the parameters - * are trivial to fill as soon FE_GET_FRONTEND is done. - */ - struct dvb_frontend_event __user *e = (void __user *) arg; - if (cinergyt2->pending_fe_events == 0) { - if (file->f_flags & O_NONBLOCK) - return -EWOULDBLOCK; - wait_event_interruptible(cinergyt2->poll_wq, - cinergyt2->pending_fe_events > 0); - } - cinergyt2->pending_fe_events = 0; - return cinergyt2_ioctl(inode, file, FE_READ_STATUS, - (unsigned long) &e->status); - } - - default: - ; - } - - return -EINVAL; -} - -static int cinergyt2_mmap(struct file *file, struct vm_area_struct *vma) -{ - struct dvb_device *dvbdev = file->private_data; - struct cinergyt2 *cinergyt2 = dvbdev->priv; - int ret = 0; - - lock_kernel(); - - if (vma->vm_flags & (VM_WRITE | VM_EXEC)) { - ret = -EPERM; - goto bailout; - } - - if (vma->vm_end > vma->vm_start + STREAM_URB_COUNT * STREAM_BUF_SIZE) { - ret = -EINVAL; - goto bailout; - } - - vma->vm_flags |= (VM_IO | VM_DONTCOPY); - vma->vm_file = file; - - ret = remap_pfn_range(vma, vma->vm_start, - virt_to_phys(cinergyt2->streambuf) >> PAGE_SHIFT, - vma->vm_end - vma->vm_start, - vma->vm_page_prot) ? -EAGAIN : 0; -bailout: - unlock_kernel(); - return ret; -} - -static struct file_operations cinergyt2_fops = { - .owner = THIS_MODULE, - .ioctl = cinergyt2_ioctl, - .poll = cinergyt2_poll, - .open = cinergyt2_open, - .release = cinergyt2_release, - .mmap = cinergyt2_mmap -}; - -static struct dvb_device cinergyt2_fe_template = { - .users = ~0, - .writers = 1, - .readers = (~0)-1, - .fops = &cinergyt2_fops -}; - -#ifdef ENABLE_RC - -static void cinergyt2_query_rc (struct work_struct *work) -{ - struct cinergyt2 *cinergyt2 = - container_of(work, struct cinergyt2, rc_query_work.work); - char buf[1] = { CINERGYT2_EP1_GET_RC_EVENTS }; - struct cinergyt2_rc_event rc_events[12]; - int n, len, i; - - if (cinergyt2->disconnect_pending || mutex_lock_interruptible(&cinergyt2->sem)) - return; - - len = cinergyt2_command(cinergyt2, buf, sizeof(buf), - (char *) rc_events, sizeof(rc_events)); - if (len < 0) - goto out; - if (len == 0) { - if (time_after(jiffies, cinergyt2->last_event_jiffies + - msecs_to_jiffies(150))) { - /* stop key repeat */ - if (cinergyt2->rc_input_event != KEY_MAX) { - dprintk(1, "rc_input_event=%d Up\n", cinergyt2->rc_input_event); - input_report_key(cinergyt2->rc_input_dev, - cinergyt2->rc_input_event, 0); - input_sync(cinergyt2->rc_input_dev); - cinergyt2->rc_input_event = KEY_MAX; - } - cinergyt2->rc_last_code = cpu_to_le32(~0); - } - goto out; - } - cinergyt2->last_event_jiffies = jiffies; - - for (n = 0; n < (len / sizeof(rc_events[0])); n++) { - dprintk(1, "rc_events[%d].value = %x, type=%x\n", - n, le32_to_cpu(rc_events[n].value), rc_events[n].type); - - if (rc_events[n].type == CINERGYT2_RC_EVENT_TYPE_NEC && - rc_events[n].value == cpu_to_le32(~0)) { - /* keyrepeat bit -> just repeat last rc_input_event */ - } else { - cinergyt2->rc_input_event = KEY_MAX; - for (i = 0; i < ARRAY_SIZE(rc_keys); i += 3) { - if (rc_keys[i + 0] == rc_events[n].type && - rc_keys[i + 1] == le32_to_cpu(rc_events[n].value)) { - cinergyt2->rc_input_event = rc_keys[i + 2]; - break; - } - } - } - - if (cinergyt2->rc_input_event != KEY_MAX) { - if (rc_events[n].value == cinergyt2->rc_last_code && - cinergyt2->rc_last_code != cpu_to_le32(~0)) { - /* emit a key-up so the double event is recognized */ - dprintk(1, "rc_input_event=%d UP\n", cinergyt2->rc_input_event); - input_report_key(cinergyt2->rc_input_dev, - cinergyt2->rc_input_event, 0); - } - dprintk(1, "rc_input_event=%d\n", cinergyt2->rc_input_event); - input_report_key(cinergyt2->rc_input_dev, - cinergyt2->rc_input_event, 1); - input_sync(cinergyt2->rc_input_dev); - cinergyt2->rc_last_code = rc_events[n].value; - } - } - -out: - schedule_delayed_work(&cinergyt2->rc_query_work, - msecs_to_jiffies(RC_QUERY_INTERVAL)); - - mutex_unlock(&cinergyt2->sem); -} - -static int cinergyt2_register_rc(struct cinergyt2 *cinergyt2) -{ - struct input_dev *input_dev; - int i; - int err; - - input_dev = input_allocate_device(); - if (!input_dev) - return -ENOMEM; - - usb_make_path(cinergyt2->udev, cinergyt2->phys, sizeof(cinergyt2->phys)); - strlcat(cinergyt2->phys, "/input0", sizeof(cinergyt2->phys)); - cinergyt2->rc_input_event = KEY_MAX; - cinergyt2->rc_last_code = cpu_to_le32(~0); - INIT_DELAYED_WORK(&cinergyt2->rc_query_work, cinergyt2_query_rc); - - input_dev->name = DRIVER_NAME " remote control"; - input_dev->phys = cinergyt2->phys; - input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REP); - for (i = 0; i < ARRAY_SIZE(rc_keys); i += 3) - set_bit(rc_keys[i + 2], input_dev->keybit); - input_dev->keycodesize = 0; - input_dev->keycodemax = 0; - input_dev->id.bustype = BUS_USB; - input_dev->id.vendor = le16_to_cpu(cinergyt2->udev->descriptor.idVendor); - input_dev->id.product = le16_to_cpu(cinergyt2->udev->descriptor.idProduct); - input_dev->id.version = 1; - input_dev->dev.parent = &cinergyt2->udev->dev; - - err = input_register_device(input_dev); - if (err) { - input_free_device(input_dev); - return err; - } - - cinergyt2->rc_input_dev = input_dev; - schedule_delayed_work(&cinergyt2->rc_query_work, HZ/2); - - return 0; -} - -static void cinergyt2_unregister_rc(struct cinergyt2 *cinergyt2) -{ - cancel_rearming_delayed_work(&cinergyt2->rc_query_work); - input_unregister_device(cinergyt2->rc_input_dev); -} - -static inline void cinergyt2_suspend_rc(struct cinergyt2 *cinergyt2) -{ - cancel_rearming_delayed_work(&cinergyt2->rc_query_work); -} - -static inline void cinergyt2_resume_rc(struct cinergyt2 *cinergyt2) -{ - schedule_delayed_work(&cinergyt2->rc_query_work, HZ/2); -} - -#else - -static inline int cinergyt2_register_rc(struct cinergyt2 *cinergyt2) { return 0; } -static inline void cinergyt2_unregister_rc(struct cinergyt2 *cinergyt2) { } -static inline void cinergyt2_suspend_rc(struct cinergyt2 *cinergyt2) { } -static inline void cinergyt2_resume_rc(struct cinergyt2 *cinergyt2) { } - -#endif /* ENABLE_RC */ - -static void cinergyt2_query (struct work_struct *work) -{ - struct cinergyt2 *cinergyt2 = - container_of(work, struct cinergyt2, query_work.work); - char cmd [] = { CINERGYT2_EP1_GET_TUNER_STATUS }; - struct dvbt_get_status_msg *s = &cinergyt2->status; - uint8_t lock_bits; - - if (cinergyt2->disconnect_pending || mutex_lock_interruptible(&cinergyt2->sem)) - return; - - lock_bits = s->lock_bits; - - cinergyt2_command(cinergyt2, cmd, sizeof(cmd), (char *) s, sizeof(*s)); - - cinergyt2->uncorrected_block_count += - le32_to_cpu(s->uncorrected_block_count); - - if (lock_bits != s->lock_bits) { - wake_up_interruptible(&cinergyt2->poll_wq); - cinergyt2->pending_fe_events++; - } - - schedule_delayed_work(&cinergyt2->query_work, - msecs_to_jiffies(QUERY_INTERVAL)); - - mutex_unlock(&cinergyt2->sem); -} - -static int cinergyt2_probe (struct usb_interface *intf, - const struct usb_device_id *id) -{ - struct cinergyt2 *cinergyt2; - int err; - - if (!(cinergyt2 = kzalloc (sizeof(struct cinergyt2), GFP_KERNEL))) { - dprintk(1, "out of memory?!?\n"); - return -ENOMEM; - } - - usb_set_intfdata (intf, (void *) cinergyt2); - - mutex_init(&cinergyt2->sem); - mutex_init(&cinergyt2->wq_sem); - init_waitqueue_head (&cinergyt2->poll_wq); - INIT_DELAYED_WORK(&cinergyt2->query_work, cinergyt2_query); - - cinergyt2->udev = interface_to_usbdev(intf); - cinergyt2->param.cmd = CINERGYT2_EP1_SET_TUNER_PARAMETERS; - - if (cinergyt2_alloc_stream_urbs (cinergyt2) < 0) { - dprintk(1, "unable to allocate stream urbs\n"); - kfree(cinergyt2); - return -ENOMEM; - } - - err = dvb_register_adapter(&cinergyt2->adapter, DRIVER_NAME, - THIS_MODULE, &cinergyt2->udev->dev, - adapter_nr); - if (err < 0) { - kfree(cinergyt2); - return err; - } - - cinergyt2->demux.priv = cinergyt2; - cinergyt2->demux.filternum = 256; - cinergyt2->demux.feednum = 256; - cinergyt2->demux.start_feed = cinergyt2_start_feed; - cinergyt2->demux.stop_feed = cinergyt2_stop_feed; - cinergyt2->demux.dmx.capabilities = DMX_TS_FILTERING | - DMX_SECTION_FILTERING | - DMX_MEMORY_BASED_FILTERING; - - if ((err = dvb_dmx_init(&cinergyt2->demux)) < 0) { - dprintk(1, "dvb_dmx_init() failed (err = %d)\n", err); - goto bailout; - } - - cinergyt2->dmxdev.filternum = cinergyt2->demux.filternum; - cinergyt2->dmxdev.demux = &cinergyt2->demux.dmx; - cinergyt2->dmxdev.capabilities = 0; - - if ((err = dvb_dmxdev_init(&cinergyt2->dmxdev, &cinergyt2->adapter)) < 0) { - dprintk(1, "dvb_dmxdev_init() failed (err = %d)\n", err); - goto bailout; - } - - if (dvb_net_init(&cinergyt2->adapter, &cinergyt2->dvbnet, &cinergyt2->demux.dmx)) - dprintk(1, "dvb_net_init() failed!\n"); - - dvb_register_device(&cinergyt2->adapter, &cinergyt2->fedev, - &cinergyt2_fe_template, cinergyt2, - DVB_DEVICE_FRONTEND); - - err = cinergyt2_register_rc(cinergyt2); - if (err) - goto bailout; - - return 0; - -bailout: - dvb_net_release(&cinergyt2->dvbnet); - dvb_dmxdev_release(&cinergyt2->dmxdev); - dvb_dmx_release(&cinergyt2->demux); - dvb_unregister_adapter(&cinergyt2->adapter); - cinergyt2_free_stream_urbs(cinergyt2); - kfree(cinergyt2); - return -ENOMEM; -} - -static void cinergyt2_disconnect (struct usb_interface *intf) -{ - struct cinergyt2 *cinergyt2 = usb_get_intfdata (intf); - - cinergyt2_unregister_rc(cinergyt2); - cancel_rearming_delayed_work(&cinergyt2->query_work); - wake_up_interruptible(&cinergyt2->poll_wq); - - cinergyt2->demux.dmx.close(&cinergyt2->demux.dmx); - cinergyt2->disconnect_pending = 1; - - if (!atomic_read(&cinergyt2->inuse)) - cinergyt2_unregister(cinergyt2); -} - -static int cinergyt2_suspend (struct usb_interface *intf, pm_message_t state) -{ - struct cinergyt2 *cinergyt2 = usb_get_intfdata (intf); - - if (cinergyt2->disconnect_pending) - return -EAGAIN; - if (mutex_lock_interruptible(&cinergyt2->wq_sem)) - return -ERESTARTSYS; - - cinergyt2_suspend_rc(cinergyt2); - cancel_rearming_delayed_work(&cinergyt2->query_work); - - mutex_lock(&cinergyt2->sem); - if (cinergyt2->streaming) - cinergyt2_stop_stream_xfer(cinergyt2); - cinergyt2_sleep(cinergyt2, 1); - mutex_unlock(&cinergyt2->sem); - - mutex_unlock(&cinergyt2->wq_sem); - - return 0; -} - -static int cinergyt2_resume (struct usb_interface *intf) -{ - struct cinergyt2 *cinergyt2 = usb_get_intfdata (intf); - struct dvbt_set_parameters_msg *param = &cinergyt2->param; - int err = -EAGAIN; - - if (cinergyt2->disconnect_pending) - goto out; - err = mutex_lock_interruptible(&cinergyt2->wq_sem); - if (err) - goto out; - - err = mutex_lock_interruptible(&cinergyt2->sem); - if (err) - goto out_unlock1; - - if (!cinergyt2->sleeping) { - cinergyt2_sleep(cinergyt2, 0); - cinergyt2_command(cinergyt2, (char *) param, sizeof(*param), NULL, 0); - if (cinergyt2->streaming) - cinergyt2_start_stream_xfer(cinergyt2); - schedule_delayed_work(&cinergyt2->query_work, HZ/2); - } - - cinergyt2_resume_rc(cinergyt2); - - mutex_unlock(&cinergyt2->sem); -out_unlock1: - mutex_unlock(&cinergyt2->wq_sem); -out: - return err; -} - -static const struct usb_device_id cinergyt2_table [] __devinitdata = { - { USB_DEVICE(0x0ccd, 0x0038) }, - { 0 } -}; - -MODULE_DEVICE_TABLE(usb, cinergyt2_table); - -static struct usb_driver cinergyt2_driver = { - .name = "cinergyT2", - .probe = cinergyt2_probe, - .disconnect = cinergyt2_disconnect, - .suspend = cinergyt2_suspend, - .resume = cinergyt2_resume, - .id_table = cinergyt2_table -}; - -static int __init cinergyt2_init (void) -{ - int err; - - if ((err = usb_register(&cinergyt2_driver)) < 0) - dprintk(1, "usb_register() failed! (err %i)\n", err); - - return err; -} - -static void __exit cinergyt2_exit (void) -{ - usb_deregister(&cinergyt2_driver); -} - -module_init (cinergyt2_init); -module_exit (cinergyt2_exit); - -MODULE_LICENSE("GPL"); -MODULE_AUTHOR("Holger Waechtler, Daniel Mack"); diff --git a/drivers/media/dvb/dvb-usb/Kconfig b/drivers/media/dvb/dvb-usb/Kconfig index 241c9ab..57bb470 100644 --- a/drivers/media/dvb/dvb-usb/Kconfig +++ b/drivers/media/dvb/dvb-usb/Kconfig @@ -259,6 +259,14 @@ config DVB_USB_DW2102 Say Y here to support the DvbWorld DVB-S/S2 USB2.0 receivers and the TeVii S650. +config DVB_USB_CINERGY_T2 + tristate "Terratec CinergyT2/qanu USB 2.0 DVB-T receiver" + depends on DVB_USB + help + Support for "TerraTec CinergyT2" USB2.0 Highspeed DVB Receivers + + Say Y if you own such a device and want to use it. + config DVB_USB_ANYSEE tristate "Anysee DVB-T/C USB2.0 support" depends on DVB_USB diff --git a/drivers/media/dvb/dvb-usb/Makefile b/drivers/media/dvb/dvb-usb/Makefile index ece8c9d..3122b7c 100644 --- a/drivers/media/dvb/dvb-usb/Makefile +++ b/drivers/media/dvb/dvb-usb/Makefile @@ -73,6 +73,10 @@ obj-$(CONFIG_DVB_USB_DTV5100) += dvb-usb-dtv5100.o dvb-usb-af9015-objs = af9015.o obj-$(CONFIG_DVB_USB_AF9015) += dvb-usb-af9015.o +dvb-usb-cinergyT2-objs = cinergyT2-core.o cinergyT2-fe.o +obj-$(CONFIG_DVB_USB_CINERGY_T2) += dvb-usb-cinergyT2.o + + EXTRA_CFLAGS += -Idrivers/media/dvb/dvb-core/ -Idrivers/media/dvb/frontends/ # due to tuner-xc3028 EXTRA_CFLAGS += -Idrivers/media/common/tuners diff --git a/drivers/media/dvb/dvb-usb/cinergyT2-core.c b/drivers/media/dvb/dvb-usb/cinergyT2-core.c new file mode 100644 index 0000000..2586303 --- /dev/null +++ b/drivers/media/dvb/dvb-usb/cinergyT2-core.c @@ -0,0 +1,230 @@ +/* + * TerraTec Cinergy T2/qanu USB2 DVB-T adapter. + * + * Copyright (C) 2007 Tomi Orava (tomimo@ncircle.nullnet.fi) + * + * Based on the dvb-usb-framework code and the + * original Terratec Cinergy T2 driver by: + * + * Copyright (C) 2004 Daniel Mack and + * Holger Waechtler + * + * Protocol Spec published on http://qanu.de/specs/terratec_cinergyT2.pdf + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + */ + +#include "cinergyT2.h" + + +/* debug */ +int dvb_usb_cinergyt2_debug; +int disable_remote; + +module_param_named(debug, dvb_usb_cinergyt2_debug, int, 0644); +MODULE_PARM_DESC(debug, "set debugging level (1=info, xfer=2, rc=4 " + "(or-able))."); + +DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); + + +/* We are missing a release hook with usb_device data */ +struct dvb_usb_device *cinergyt2_usb_device; + +static struct dvb_usb_device_properties cinergyt2_properties; + +static int cinergyt2_streaming_ctrl(struct dvb_usb_adapter *adap, int enable) +{ + char buf[] = { CINERGYT2_EP1_CONTROL_STREAM_TRANSFER, enable ? 1 : 0 }; + char result[64]; + return dvb_usb_generic_rw(adap->dev, buf, sizeof(buf), result, + sizeof(result), 0); +} + +static int cinergyt2_power_ctrl(struct dvb_usb_device *d, int enable) +{ + char buf[] = { CINERGYT2_EP1_SLEEP_MODE, enable ? 0 : 1 }; + char state[3]; + return dvb_usb_generic_rw(d, buf, sizeof(buf), state, sizeof(state), 0); +} + +static int cinergyt2_frontend_attach(struct dvb_usb_adapter *adap) +{ + char query[] = { CINERGYT2_EP1_GET_FIRMWARE_VERSION }; + char state[3]; + int ret; + + adap->fe = cinergyt2_fe_attach(adap->dev); + + ret = dvb_usb_generic_rw(adap->dev, query, sizeof(query), state, + sizeof(state), 0); + if (ret < 0) { + deb_rc("cinergyt2_power_ctrl() Failed to retrieve sleep " + "state info\n"); + } + + /* Copy this pointer as we are gonna need it in the release phase */ + cinergyt2_usb_device = adap->dev; + + return 0; +} + +static struct dvb_usb_rc_key cinergyt2_rc_keys[] = { + { 0x04, 0x01, KEY_POWER }, + { 0x04, 0x02, KEY_1 }, + { 0x04, 0x03, KEY_2 }, + { 0x04, 0x04, KEY_3 }, + { 0x04, 0x05, KEY_4 }, + { 0x04, 0x06, KEY_5 }, + { 0x04, 0x07, KEY_6 }, + { 0x04, 0x08, KEY_7 }, + { 0x04, 0x09, KEY_8 }, + { 0x04, 0x0a, KEY_9 }, + { 0x04, 0x0c, KEY_0 }, + { 0x04, 0x0b, KEY_VIDEO }, + { 0x04, 0x0d, KEY_REFRESH }, + { 0x04, 0x0e, KEY_SELECT }, + { 0x04, 0x0f, KEY_EPG }, + { 0x04, 0x10, KEY_UP }, + { 0x04, 0x14, KEY_DOWN }, + { 0x04, 0x11, KEY_LEFT }, + { 0x04, 0x13, KEY_RIGHT }, + { 0x04, 0x12, KEY_OK }, + { 0x04, 0x15, KEY_TEXT }, + { 0x04, 0x16, KEY_INFO }, + { 0x04, 0x17, KEY_RED }, + { 0x04, 0x18, KEY_GREEN }, + { 0x04, 0x19, KEY_YELLOW }, + { 0x04, 0x1a, KEY_BLUE }, + { 0x04, 0x1c, KEY_VOLUMEUP }, + { 0x04, 0x1e, KEY_VOLUMEDOWN }, + { 0x04, 0x1d, KEY_MUTE }, + { 0x04, 0x1b, KEY_CHANNELUP }, + { 0x04, 0x1f, KEY_CHANNELDOWN }, + { 0x04, 0x40, KEY_PAUSE }, + { 0x04, 0x4c, KEY_PLAY }, + { 0x04, 0x58, KEY_RECORD }, + { 0x04, 0x54, KEY_PREVIOUS }, + { 0x04, 0x48, KEY_STOP }, + { 0x04, 0x5c, KEY_NEXT } +}; + +static int cinergyt2_rc_query(struct dvb_usb_device *d, u32 *event, int *state) +{ + u8 key[5] = {0, 0, 0, 0, 0}, cmd = CINERGYT2_EP1_GET_RC_EVENTS; + *state = REMOTE_NO_KEY_PRESSED; + + dvb_usb_generic_rw(d, &cmd, 1, key, sizeof(key), 0); + if (key[4] == 0xff) + return 0; + + /* hack to pass checksum on the custom field (is set to 0xeb) */ + key[2] = ~0x04; + dvb_usb_nec_rc_key_to_event(d, key, event, state); + if (key[0] != 0) + deb_info("key: %x %x %x %x %x\n", + key[0], key[1], key[2], key[3], key[4]); + + return 0; +} + +static int cinergyt2_usb_probe(struct usb_interface *intf, + const struct usb_device_id *id) +{ + return dvb_usb_device_init(intf, &cinergyt2_properties, + THIS_MODULE, NULL, adapter_nr); +} + + +static struct usb_device_id cinergyt2_usb_table[] = { + { USB_DEVICE(USB_VID_TERRATEC, 0x0038) }, + { 0 } +}; + +MODULE_DEVICE_TABLE(usb, cinergyt2_usb_table); + +static struct dvb_usb_device_properties cinergyt2_properties = { + + .num_adapters = 1, + .adapter = { + { + .streaming_ctrl = cinergyt2_streaming_ctrl, + .frontend_attach = cinergyt2_frontend_attach, + + /* parameter for the MPEG2-data transfer */ + .stream = { + .type = USB_BULK, + .count = 5, + .endpoint = 0x02, + .u = { + .bulk = { + .buffersize = 512, + } + } + }, + } + }, + + .power_ctrl = cinergyt2_power_ctrl, + + .rc_interval = 50, + .rc_key_map = cinergyt2_rc_keys, + .rc_key_map_size = ARRAY_SIZE(cinergyt2_rc_keys), + .rc_query = cinergyt2_rc_query, + + .generic_bulk_ctrl_endpoint = 1, + + .num_device_descs = 1, + .devices = { + { .name = "TerraTec/qanu USB2.0 Highspeed DVB-T Receiver", + .cold_ids = {NULL}, + .warm_ids = { &cinergyt2_usb_table[0], NULL }, + }, + { NULL }, + } +}; + + +static struct usb_driver cinergyt2_driver = { + .name = "cinergyT2", + .probe = cinergyt2_usb_probe, + .disconnect = dvb_usb_device_exit, + .id_table = cinergyt2_usb_table +}; + +static int __init cinergyt2_usb_init(void) +{ + int err; + + err = usb_register(&cinergyt2_driver); + if (err) { + err("usb_register() failed! (err %i)\n", err); + return err; + } + return 0; +} + +static void __exit cinergyt2_usb_exit(void) +{ + usb_deregister(&cinergyt2_driver); +} + +module_init(cinergyt2_usb_init); +module_exit(cinergyt2_usb_exit); + +MODULE_DESCRIPTION("Terratec Cinergy T2 DVB-T driver"); +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Tomi Orava"); diff --git a/drivers/media/dvb/dvb-usb/cinergyT2-fe.c b/drivers/media/dvb/dvb-usb/cinergyT2-fe.c new file mode 100644 index 0000000..649f25c --- /dev/null +++ b/drivers/media/dvb/dvb-usb/cinergyT2-fe.c @@ -0,0 +1,351 @@ +/* + * TerraTec Cinergy T2/qanu USB2 DVB-T adapter. + * + * Copyright (C) 2007 Tomi Orava (tomimo@ncircle.nullnet.fi) + * + * Based on the dvb-usb-framework code and the + * original Terratec Cinergy T2 driver by: + * + * Copyright (C) 2004 Daniel Mack and + * Holger Waechtler + * + * Protocol Spec published on http://qanu.de/specs/terratec_cinergyT2.pdf + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + */ + +#include "cinergyT2.h" + + +/** + * convert linux-dvb frontend parameter set into TPS. + * See ETSI ETS-300744, section 4.6.2, table 9 for details. + * + * This function is probably reusable and may better get placed in a support + * library. + * + * We replace errornous fields by default TPS fields (the ones with value 0). + */ + +static uint16_t compute_tps(struct dvb_frontend_parameters *p) +{ + struct dvb_ofdm_parameters *op = &p->u.ofdm; + uint16_t tps = 0; + + switch (op->code_rate_HP) { + case FEC_2_3: + tps |= (1 << 7); + break; + case FEC_3_4: + tps |= (2 << 7); + break; + case FEC_5_6: + tps |= (3 << 7); + break; + case FEC_7_8: + tps |= (4 << 7); + break; + case FEC_1_2: + case FEC_AUTO: + default: + /* tps |= (0 << 7) */; + } + + switch (op->code_rate_LP) { + case FEC_2_3: + tps |= (1 << 4); + break; + case FEC_3_4: + tps |= (2 << 4); + break; + case FEC_5_6: + tps |= (3 << 4); + break; + case FEC_7_8: + tps |= (4 << 4); + break; + case FEC_1_2: + case FEC_AUTO: + default: + /* tps |= (0 << 4) */; + } + + switch (op->constellation) { + case QAM_16: + tps |= (1 << 13); + break; + case QAM_64: + tps |= (2 << 13); + break; + case QPSK: + default: + /* tps |= (0 << 13) */; + } + + switch (op->transmission_mode) { + case TRANSMISSION_MODE_8K: + tps |= (1 << 0); + break; + case TRANSMISSION_MODE_2K: + default: + /* tps |= (0 << 0) */; + } + + switch (op->guard_interval) { + case GUARD_INTERVAL_1_16: + tps |= (1 << 2); + break; + case GUARD_INTERVAL_1_8: + tps |= (2 << 2); + break; + case GUARD_INTERVAL_1_4: + tps |= (3 << 2); + break; + case GUARD_INTERVAL_1_32: + default: + /* tps |= (0 << 2) */; + } + + switch (op->hierarchy_information) { + case HIERARCHY_1: + tps |= (1 << 10); + break; + case HIERARCHY_2: + tps |= (2 << 10); + break; + case HIERARCHY_4: + tps |= (3 << 10); + break; + case HIERARCHY_NONE: + default: + /* tps |= (0 << 10) */; + } + + return tps; +} + +struct cinergyt2_fe_state { + struct dvb_frontend fe; + struct dvb_usb_device *d; +}; + +static int cinergyt2_fe_read_status(struct dvb_frontend *fe, + fe_status_t *status) +{ + struct cinergyt2_fe_state *state = fe->demodulator_priv; + struct dvbt_get_status_msg result; + u8 cmd[] = { CINERGYT2_EP1_GET_TUNER_STATUS }; + int ret; + + ret = dvb_usb_generic_rw(state->d, cmd, sizeof(cmd), (u8 *)&result, + sizeof(result), 0); + if (ret < 0) + return ret; + + *status = 0; + + if (0xffff - le16_to_cpu(result.gain) > 30) + *status |= FE_HAS_SIGNAL; + if (result.lock_bits & (1 << 6)) + *status |= FE_HAS_LOCK; + if (result.lock_bits & (1 << 5)) + *status |= FE_HAS_SYNC; + if (result.lock_bits & (1 << 4)) + *status |= FE_HAS_CARRIER; + if (result.lock_bits & (1 << 1)) + *status |= FE_HAS_VITERBI; + + if ((*status & (FE_HAS_CARRIER | FE_HAS_VITERBI | FE_HAS_SYNC)) != + (FE_HAS_CARRIER | FE_HAS_VITERBI | FE_HAS_SYNC)) + *status &= ~FE_HAS_LOCK; + + return 0; +} + +static int cinergyt2_fe_read_ber(struct dvb_frontend *fe, u32 *ber) +{ + struct cinergyt2_fe_state *state = fe->demodulator_priv; + struct dvbt_get_status_msg status; + char cmd[] = { CINERGYT2_EP1_GET_TUNER_STATUS }; + int ret; + + ret = dvb_usb_generic_rw(state->d, cmd, sizeof(cmd), (char *)&status, + sizeof(status), 0); + if (ret < 0) + return ret; + + *ber = le32_to_cpu(status.viterbi_error_rate); + return 0; +} + +static int cinergyt2_fe_read_unc_blocks(struct dvb_frontend *fe, u32 *unc) +{ + struct cinergyt2_fe_state *state = fe->demodulator_priv; + struct dvbt_get_status_msg status; + u8 cmd[] = { CINERGYT2_EP1_GET_TUNER_STATUS }; + int ret; + + ret = dvb_usb_generic_rw(state->d, cmd, sizeof(cmd), (u8 *)&status, + sizeof(status), 0); + if (ret < 0) { + err("cinergyt2_fe_read_unc_blocks() Failed! (Error=%d)\n", + ret); + return ret; + } + *unc = le32_to_cpu(status.uncorrected_block_count); + return 0; +} + +static int cinergyt2_fe_read_signal_strength(struct dvb_frontend *fe, + u16 *strength) +{ + struct cinergyt2_fe_state *state = fe->demodulator_priv; + struct dvbt_get_status_msg status; + char cmd[] = { CINERGYT2_EP1_GET_TUNER_STATUS }; + int ret; + + ret = dvb_usb_generic_rw(state->d, cmd, sizeof(cmd), (char *)&status, + sizeof(status), 0); + if (ret < 0) { + err("cinergyt2_fe_read_signal_strength() Failed!" + " (Error=%d)\n", ret); + return ret; + } + *strength = (0xffff - le16_to_cpu(status.gain)); + return 0; +} + +static int cinergyt2_fe_read_snr(struct dvb_frontend *fe, u16 *snr) +{ + struct cinergyt2_fe_state *state = fe->demodulator_priv; + struct dvbt_get_status_msg status; + char cmd[] = { CINERGYT2_EP1_GET_TUNER_STATUS }; + int ret; + + ret = dvb_usb_generic_rw(state->d, cmd, sizeof(cmd), (char *)&status, + sizeof(status), 0); + if (ret < 0) { + err("cinergyt2_fe_read_snr() Failed! (Error=%d)\n", ret); + return ret; + } + *snr = (status.snr << 8) | status.snr; + return 0; +} + +static int cinergyt2_fe_init(struct dvb_frontend *fe) +{ + return 0; +} + +static int cinergyt2_fe_sleep(struct dvb_frontend *fe) +{ + deb_info("cinergyt2_fe_sleep() Called\n"); + return 0; +} + +static int cinergyt2_fe_get_tune_settings(struct dvb_frontend *fe, + struct dvb_frontend_tune_settings *tune) +{ + tune->min_delay_ms = 800; + return 0; +} + +static int cinergyt2_fe_set_frontend(struct dvb_frontend *fe, + struct dvb_frontend_parameters *fep) +{ + struct cinergyt2_fe_state *state = fe->demodulator_priv; + struct dvbt_set_parameters_msg param; + char result[2]; + int err; + + param.cmd = CINERGYT2_EP1_SET_TUNER_PARAMETERS; + param.tps = cpu_to_le16(compute_tps(fep)); + param.freq = cpu_to_le32(fep->frequency / 1000); + param.bandwidth = 8 - fep->u.ofdm.bandwidth - BANDWIDTH_8_MHZ; + + err = dvb_usb_generic_rw(state->d, + (char *)¶m, sizeof(param), + result, sizeof(result), 0); + if (err < 0) + err("cinergyt2_fe_set_frontend() Failed! err=%d\n", err); + + return (err < 0) ? err : 0; +} + +static int cinergyt2_fe_get_frontend(struct dvb_frontend *fe, + struct dvb_frontend_parameters *fep) +{ + return 0; +} + +static void cinergyt2_fe_release(struct dvb_frontend *fe) +{ + struct cinergyt2_fe_state *state = fe->demodulator_priv; + if (state != NULL) + kfree(state); +} + +static struct dvb_frontend_ops cinergyt2_fe_ops; + +struct dvb_frontend *cinergyt2_fe_attach(struct dvb_usb_device *d) +{ + struct cinergyt2_fe_state *s = kzalloc(sizeof( + struct cinergyt2_fe_state), GFP_KERNEL); + if (s == NULL) + return NULL; + + s->d = d; + memcpy(&s->fe.ops, &cinergyt2_fe_ops, sizeof(struct dvb_frontend_ops)); + s->fe.demodulator_priv = s; + return &s->fe; +} + + +static struct dvb_frontend_ops cinergyt2_fe_ops = { + .info = { + .name = DRIVER_NAME, + .type = FE_OFDM, + .frequency_min = 174000000, + .frequency_max = 862000000, + .frequency_stepsize = 166667, + .caps = FE_CAN_INVERSION_AUTO | FE_CAN_FEC_1_2 + | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 + | FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 + | FE_CAN_FEC_AUTO | FE_CAN_QPSK + | FE_CAN_QAM_16 | FE_CAN_QAM_64 + | FE_CAN_QAM_AUTO + | FE_CAN_TRANSMISSION_MODE_AUTO + | FE_CAN_GUARD_INTERVAL_AUTO + | FE_CAN_HIERARCHY_AUTO + | FE_CAN_RECOVER + | FE_CAN_MUTE_TS + }, + + .release = cinergyt2_fe_release, + + .init = cinergyt2_fe_init, + .sleep = cinergyt2_fe_sleep, + + .set_frontend = cinergyt2_fe_set_frontend, + .get_frontend = cinergyt2_fe_get_frontend, + .get_tune_settings = cinergyt2_fe_get_tune_settings, + + .read_status = cinergyt2_fe_read_status, + .read_ber = cinergyt2_fe_read_ber, + .read_signal_strength = cinergyt2_fe_read_signal_strength, + .read_snr = cinergyt2_fe_read_snr, + .read_ucblocks = cinergyt2_fe_read_unc_blocks, +}; diff --git a/drivers/media/dvb/dvb-usb/cinergyT2.h b/drivers/media/dvb/dvb-usb/cinergyT2.h new file mode 100644 index 0000000..11d79eb --- /dev/null +++ b/drivers/media/dvb/dvb-usb/cinergyT2.h @@ -0,0 +1,95 @@ +/* + * TerraTec Cinergy T2/qanu USB2 DVB-T adapter. + * + * Copyright (C) 2007 Tomi Orava (tomimo@ncircle.nullnet.fi) + * + * Based on the dvb-usb-framework code and the + * original Terratec Cinergy T2 driver by: + * + * Copyright (C) 2004 Daniel Mack and + * Holger Waechtler + * + * Protocol Spec published on http://qanu.de/specs/terratec_cinergyT2.pdf + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + */ + +#ifndef _DVB_USB_CINERGYT2_H_ +#define _DVB_USB_CINERGYT2_H_ + +#include + +#define DVB_USB_LOG_PREFIX "cinergyT2" +#include "dvb-usb.h" + +#define DRIVER_NAME "TerraTec/qanu USB2.0 Highspeed DVB-T Receiver" + +extern int dvb_usb_cinergyt2_debug; + +#define deb_info(args...) dprintk(dvb_usb_cinergyt2_debug, 0x001, args) +#define deb_xfer(args...) dprintk(dvb_usb_cinergyt2_debug, 0x002, args) +#define deb_pll(args...) dprintk(dvb_usb_cinergyt2_debug, 0x004, args) +#define deb_ts(args...) dprintk(dvb_usb_cinergyt2_debug, 0x008, args) +#define deb_err(args...) dprintk(dvb_usb_cinergyt2_debug, 0x010, args) +#define deb_rc(args...) dprintk(dvb_usb_cinergyt2_debug, 0x020, args) +#define deb_fw(args...) dprintk(dvb_usb_cinergyt2_debug, 0x040, args) +#define deb_mem(args...) dprintk(dvb_usb_cinergyt2_debug, 0x080, args) +#define deb_uxfer(args...) dprintk(dvb_usb_cinergyt2_debug, 0x100, args) + + + +enum cinergyt2_ep1_cmd { + CINERGYT2_EP1_PID_TABLE_RESET = 0x01, + CINERGYT2_EP1_PID_SETUP = 0x02, + CINERGYT2_EP1_CONTROL_STREAM_TRANSFER = 0x03, + CINERGYT2_EP1_SET_TUNER_PARAMETERS = 0x04, + CINERGYT2_EP1_GET_TUNER_STATUS = 0x05, + CINERGYT2_EP1_START_SCAN = 0x06, + CINERGYT2_EP1_CONTINUE_SCAN = 0x07, + CINERGYT2_EP1_GET_RC_EVENTS = 0x08, + CINERGYT2_EP1_SLEEP_MODE = 0x09, + CINERGYT2_EP1_GET_FIRMWARE_VERSION = 0x0A +}; + + +struct dvbt_get_status_msg { + uint32_t freq; + uint8_t bandwidth; + uint16_t tps; + uint8_t flags; + uint16_t gain; + uint8_t snr; + uint32_t viterbi_error_rate; + uint32_t rs_error_rate; + uint32_t uncorrected_block_count; + uint8_t lock_bits; + uint8_t prev_lock_bits; +} __attribute__((packed)); + + +struct dvbt_set_parameters_msg { + uint8_t cmd; + uint32_t freq; + uint8_t bandwidth; + uint16_t tps; + uint8_t flags; +} __attribute__((packed)); + + +extern struct dvb_frontend *cinergyt2_fe_attach(struct dvb_usb_device *d); + +#endif /* _DVB_USB_CINERGYT2_H_ */ + -- cgit v0.10.2 From 7f9876785276ac7f8606f8bf53a3dae4c10b8adb Mon Sep 17 00:00:00 2001 From: Thierry MERLE Date: Fri, 19 Sep 2008 00:24:51 -0300 Subject: V4L/DVB (9108): cinergyT2: add remote key repeat feature Implement key repeat feature for the cinergyT2 remote controller. Signed-off-by: Thierry MERLE Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/dvb/dvb-usb/cinergyT2-core.c b/drivers/media/dvb/dvb-usb/cinergyT2-core.c index 2586303..3ac9f74 100644 --- a/drivers/media/dvb/dvb-usb/cinergyT2-core.c +++ b/drivers/media/dvb/dvb-usb/cinergyT2-core.c @@ -40,6 +40,9 @@ MODULE_PARM_DESC(debug, "set debugging level (1=info, xfer=2, rc=4 " DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); +struct cinergyt2_state { + u8 rc_counter; +}; /* We are missing a release hook with usb_device data */ struct dvb_usb_device *cinergyt2_usb_device; @@ -122,22 +125,57 @@ static struct dvb_usb_rc_key cinergyt2_rc_keys[] = { { 0x04, 0x5c, KEY_NEXT } }; +/* Number of keypresses to ignore before detect repeating */ +#define RC_REPEAT_DELAY 3 + +static int repeatable_keys[] = { + KEY_UP, + KEY_DOWN, + KEY_LEFT, + KEY_RIGHT, + KEY_VOLUMEUP, + KEY_VOLUMEDOWN, + KEY_CHANNELUP, + KEY_CHANNELDOWN +}; + static int cinergyt2_rc_query(struct dvb_usb_device *d, u32 *event, int *state) { + struct cinergyt2_state *st = d->priv; u8 key[5] = {0, 0, 0, 0, 0}, cmd = CINERGYT2_EP1_GET_RC_EVENTS; + int i; + *state = REMOTE_NO_KEY_PRESSED; dvb_usb_generic_rw(d, &cmd, 1, key, sizeof(key), 0); - if (key[4] == 0xff) + if (key[4] == 0xff) { + /* key repeat */ + st->rc_counter++; + if (st->rc_counter > RC_REPEAT_DELAY) { + for (i = 0; i < ARRAY_SIZE(repeatable_keys); i++) { + if (d->last_event == repeatable_keys[i]) { + *state = REMOTE_KEY_REPEAT; + *event = d->last_event; + deb_rc("repeat key, event %x\n", + *event); + return 0; + } + } + deb_rc("repeated key (non repeatable)\n"); + } return 0; + } - /* hack to pass checksum on the custom field (is set to 0xeb) */ - key[2] = ~0x04; + /* hack to pass checksum on the custom field */ + key[2] = ~key[1]; dvb_usb_nec_rc_key_to_event(d, key, event, state); - if (key[0] != 0) - deb_info("key: %x %x %x %x %x\n", - key[0], key[1], key[2], key[3], key[4]); + if (key[0] != 0) { + if (*event != d->last_event) + st->rc_counter = 0; + deb_rc("key: %x %x %x %x %x\n", + key[0], key[1], key[2], key[3], key[4]); + } return 0; } @@ -157,7 +195,7 @@ static struct usb_device_id cinergyt2_usb_table[] = { MODULE_DEVICE_TABLE(usb, cinergyt2_usb_table); static struct dvb_usb_device_properties cinergyt2_properties = { - + .size_of_priv = sizeof(struct cinergyt2_state), .num_adapters = 1, .adapter = { { -- cgit v0.10.2 From d267d85101c509020a12686b96cbd179deaf4ecd Mon Sep 17 00:00:00 2001 From: Andy Walls Date: Sun, 28 Sep 2008 21:46:02 -0300 Subject: V4L/DVB (9110): cx18: Add default behavior of checking and retrying PCI MMIO accesses cx18: Add default behavior of checking and retrying PCI MMIO accesses. The concept of checking and retrying PCI MMIO accesses for better reliability in older motherboards was suggested by Steve Toth . This change implements MMIO retries and the retry_mmio module parameter that is enabled by default. Limited experiments have shown this is more reliable than the mmio_ndelay parameter. mmio_ndelay has insignificant effect with retries enabled. Signed-off-by: Andy Walls Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/cx18/cx18-av-core.c b/drivers/media/video/cx18/cx18-av-core.c index d8626e3..73f5141 100644 --- a/drivers/media/video/cx18/cx18-av-core.c +++ b/drivers/media/video/cx18/cx18-av-core.c @@ -42,6 +42,12 @@ int cx18_av_write4(struct cx18 *cx, u16 addr, u32 value) return 0; } +int cx18_av_write4_noretry(struct cx18 *cx, u16 addr, u32 value) +{ + cx18_write_reg_noretry(cx, value, 0xc40000 + addr); + return 0; +} + u8 cx18_av_read(struct cx18 *cx, u16 addr) { u32 x = cx18_read_reg(cx, 0xc40000 + (addr & ~3)); @@ -55,6 +61,11 @@ u32 cx18_av_read4(struct cx18 *cx, u16 addr) return cx18_read_reg(cx, 0xc40000 + addr); } +u32 cx18_av_read4_noretry(struct cx18 *cx, u16 addr) +{ + return cx18_read_reg_noretry(cx, 0xc40000 + addr); +} + int cx18_av_and_or(struct cx18 *cx, u16 addr, unsigned and_mask, u8 or_value) { diff --git a/drivers/media/video/cx18/cx18-av-core.h b/drivers/media/video/cx18/cx18-av-core.h index eb61fa1..b67d8df 100644 --- a/drivers/media/video/cx18/cx18-av-core.h +++ b/drivers/media/video/cx18/cx18-av-core.h @@ -301,8 +301,10 @@ struct cx18_av_state { /* cx18_av-core.c */ int cx18_av_write(struct cx18 *cx, u16 addr, u8 value); int cx18_av_write4(struct cx18 *cx, u16 addr, u32 value); +int cx18_av_write4_noretry(struct cx18 *cx, u16 addr, u32 value); u8 cx18_av_read(struct cx18 *cx, u16 addr); u32 cx18_av_read4(struct cx18 *cx, u16 addr); +u32 cx18_av_read4_noretry(struct cx18 *cx, u16 addr); int cx18_av_and_or(struct cx18 *cx, u16 addr, unsigned mask, u8 value); int cx18_av_and_or4(struct cx18 *cx, u16 addr, u32 mask, u32 value); int cx18_av_cmd(struct cx18 *cx, unsigned int cmd, void *arg); diff --git a/drivers/media/video/cx18/cx18-av-firmware.c b/drivers/media/video/cx18/cx18-av-firmware.c index 0488b62..522a035 100644 --- a/drivers/media/video/cx18/cx18-av-firmware.c +++ b/drivers/media/video/cx18/cx18-av-firmware.c @@ -50,7 +50,7 @@ int cx18_av_loadfw(struct cx18 *cx) cx18_av_write4(cx, 0x8100, 0x00010000); /* Put the 8051 in reset and enable firmware upload */ - cx18_av_write4(cx, CXADEC_DL_CTL, 0x0F000000); + cx18_av_write4_noretry(cx, CXADEC_DL_CTL, 0x0F000000); ptr = fw->data; size = fw->size; @@ -59,22 +59,28 @@ int cx18_av_loadfw(struct cx18 *cx) u32 dl_control = 0x0F000000 | i | ((u32)ptr[i] << 16); u32 value = 0; int retries2; + int unrec_err = 0; - for (retries2 = 0; retries2 < 5; retries2++) { - cx18_av_write4(cx, CXADEC_DL_CTL, dl_control); + for (retries2 = 0; retries2 < CX18_MAX_MMIO_RETRIES; + retries2++) { + cx18_av_write4_noretry(cx, CXADEC_DL_CTL, + dl_control); udelay(10); - value = cx18_av_read4(cx, CXADEC_DL_CTL); + value = cx18_av_read4_noretry(cx, + CXADEC_DL_CTL); if (value == dl_control) break; /* Check if we can correct the byte by changing the address. We can only write the lower address byte of the address. */ if ((value & 0x3F00) != (dl_control & 0x3F00)) { - retries2 = 5; + unrec_err = 1; break; } } - if (retries2 >= 5) + cx18_log_write_retries(cx, retries2, + cx->reg_mem + 0xc40000 + CXADEC_DL_CTL); + if (unrec_err || retries2 >= CX18_MAX_MMIO_RETRIES) break; } if (i == size) diff --git a/drivers/media/video/cx18/cx18-driver.c b/drivers/media/video/cx18/cx18-driver.c index 4de7b50..df55317 100644 --- a/drivers/media/video/cx18/cx18-driver.c +++ b/drivers/media/video/cx18/cx18-driver.c @@ -96,6 +96,7 @@ static int enc_pcm_buffers = CX18_DEFAULT_ENC_PCM_BUFFERS; static int cx18_pci_latency = 1; +int cx18_retry_mmio = 1; int cx18_debug; module_param_array(tuner, int, &tuner_c, 0644); @@ -106,6 +107,7 @@ module_param_string(pal, pal, sizeof(pal), 0644); module_param_string(secam, secam, sizeof(secam), 0644); module_param_string(ntsc, ntsc, sizeof(ntsc), 0644); module_param_named(debug, cx18_debug, int, 0644); +module_param_named(retry_mmio, cx18_retry_mmio, int, 0644); module_param(cx18_pci_latency, int, 0644); module_param(cx18_first_minor, int, 0644); @@ -147,6 +149,9 @@ MODULE_PARM_DESC(debug, MODULE_PARM_DESC(cx18_pci_latency, "Change the PCI latency to 64 if lower: 0 = No, 1 = Yes,\n" "\t\t\tDefault: Yes"); +MODULE_PARM_DESC(retry_mmio, + "Check and retry memory mapped IO accesses\n" + "\t\t\tDefault: 1 [Yes]"); MODULE_PARM_DESC(mmio_ndelay, "Delay (ns) for each CX23418 memory mapped IO access.\n" "\t\t\tTry larger values that are close to a multiple of the\n" @@ -827,6 +832,7 @@ err: if (retval == 0) retval = -ENODEV; CX18_ERR("Error %d on initialization\n", retval); + cx18_log_statistics(cx); kfree(cx18_cards[cx18_cards_active]); cx18_cards[cx18_cards_active] = NULL; @@ -931,6 +937,7 @@ static void cx18_remove(struct pci_dev *pci_dev) pci_disable_device(cx->dev); + cx18_log_statistics(cx); CX18_INFO("Removed %s, card #%d\n", cx->card_name, cx->num); } diff --git a/drivers/media/video/cx18/cx18-driver.h b/drivers/media/video/cx18/cx18-driver.h index 66cb748..80f5f56 100644 --- a/drivers/media/video/cx18/cx18-driver.h +++ b/drivers/media/video/cx18/cx18-driver.h @@ -171,6 +171,7 @@ #define CX18_MAX_PGM_INDEX (400) +extern int cx18_retry_mmio; /* enable check & retry of mmio accesses */ extern int cx18_debug; @@ -344,6 +345,13 @@ struct cx18_i2c_algo_callback_data { int bus_index; /* 0 or 1 for the cx23418's 1st or 2nd I2C bus */ }; +#define CX18_MAX_MMIO_RETRIES 10 + +struct cx18_mmio_stats { + atomic_t retried_write[CX18_MAX_MMIO_RETRIES+1]; + atomic_t retried_read[CX18_MAX_MMIO_RETRIES+1]; +}; + /* Struct to hold info about cx18 cards */ struct cx18 { int num; /* board number, -1 during init! */ @@ -433,6 +441,9 @@ struct cx18 { u32 gpio_val; struct mutex gpio_lock; + /* Statistics */ + struct cx18_mmio_stats mmio_stats; + /* v4l2 and User settings */ /* codec settings */ diff --git a/drivers/media/video/cx18/cx18-io.c b/drivers/media/video/cx18/cx18-io.c index 55d1df9..700ab94 100644 --- a/drivers/media/video/cx18/cx18-io.c +++ b/drivers/media/video/cx18/cx18-io.c @@ -24,6 +24,131 @@ #include "cx18-io.h" #include "cx18-irq.h" +void cx18_log_statistics(struct cx18 *cx) +{ + int i; + + if (!(cx18_debug & CX18_DBGFLG_INFO)) + return; + + for (i = 0; i <= CX18_MAX_MMIO_RETRIES; i++) + CX18_DEBUG_INFO("retried_write[%d] = %d\n", i, + atomic_read(&cx->mmio_stats.retried_write[i])); + for (i = 0; i <= CX18_MAX_MMIO_RETRIES; i++) + CX18_DEBUG_INFO("retried_read[%d] = %d\n", i, + atomic_read(&cx->mmio_stats.retried_read[i])); + return; +} + +void cx18_raw_writel_retry(struct cx18 *cx, u32 val, void __iomem *addr) +{ + int i; + for (i = 0; i < CX18_MAX_MMIO_RETRIES; i++) { + cx18_raw_writel_noretry(cx, val, addr); + if (val == cx18_raw_readl_noretry(cx, addr)) + break; + } + cx18_log_write_retries(cx, i, addr); +} + +u32 cx18_raw_readl_retry(struct cx18 *cx, const void __iomem *addr) +{ + int i; + u32 val; + for (i = 0; i < CX18_MAX_MMIO_RETRIES; i++) { + val = cx18_raw_readl_noretry(cx, addr); + if (val != 0xffffffff) /* PCI bus read error */ + break; + } + cx18_log_read_retries(cx, i, addr); + return val; +} + +u16 cx18_raw_readw_retry(struct cx18 *cx, const void __iomem *addr) +{ + int i; + u16 val; + for (i = 0; i < CX18_MAX_MMIO_RETRIES; i++) { + val = cx18_raw_readw_noretry(cx, addr); + if (val != 0xffff) /* PCI bus read error */ + break; + } + cx18_log_read_retries(cx, i, addr); + return val; +} + +void cx18_writel_retry(struct cx18 *cx, u32 val, void __iomem *addr) +{ + int i; + for (i = 0; i < CX18_MAX_MMIO_RETRIES; i++) { + cx18_writel_noretry(cx, val, addr); + if (val == cx18_readl_noretry(cx, addr)) + break; + } + cx18_log_write_retries(cx, i, addr); +} + +void cx18_writew_retry(struct cx18 *cx, u16 val, void __iomem *addr) +{ + int i; + for (i = 0; i < CX18_MAX_MMIO_RETRIES; i++) { + cx18_writew_noretry(cx, val, addr); + if (val == cx18_readw_noretry(cx, addr)) + break; + } + cx18_log_write_retries(cx, i, addr); +} + +void cx18_writeb_retry(struct cx18 *cx, u8 val, void __iomem *addr) +{ + int i; + for (i = 0; i < CX18_MAX_MMIO_RETRIES; i++) { + cx18_writeb_noretry(cx, val, addr); + if (val == cx18_readb_noretry(cx, addr)) + break; + } + cx18_log_write_retries(cx, i, addr); +} + +u32 cx18_readl_retry(struct cx18 *cx, const void __iomem *addr) +{ + int i; + u32 val; + for (i = 0; i < CX18_MAX_MMIO_RETRIES; i++) { + val = cx18_readl_noretry(cx, addr); + if (val != 0xffffffff) /* PCI bus read error */ + break; + } + cx18_log_read_retries(cx, i, addr); + return val; +} + +u16 cx18_readw_retry(struct cx18 *cx, const void __iomem *addr) +{ + int i; + u16 val; + for (i = 0; i < CX18_MAX_MMIO_RETRIES; i++) { + val = cx18_readw_noretry(cx, addr); + if (val != 0xffff) /* PCI bus read error */ + break; + } + cx18_log_read_retries(cx, i, addr); + return val; +} + +u8 cx18_readb_retry(struct cx18 *cx, const void __iomem *addr) +{ + int i; + u8 val; + for (i = 0; i < CX18_MAX_MMIO_RETRIES; i++) { + val = cx18_readb_noretry(cx, addr); + if (val != 0xff) /* PCI bus read error */ + break; + } + cx18_log_read_retries(cx, i, addr); + return val; +} + void cx18_memcpy_fromio(struct cx18 *cx, void *to, const void __iomem *from, unsigned int len) { @@ -127,13 +252,3 @@ void cx18_setup_page(struct cx18 *cx, u32 addr) val = (val & ~0x1f00) | ((addr >> 17) & 0x1f00); cx18_write_reg(cx, val, 0xD000F8); } - -/* Tries to recover from the CX23418 responding improperly on the PCI bus */ -int cx18_pci_try_recover(struct cx18 *cx) -{ - u16 status; - - pci_read_config_word(cx->dev, PCI_STATUS, &status); - pci_write_config_word(cx->dev, PCI_STATUS, status); - return 0; -} diff --git a/drivers/media/video/cx18/cx18-io.h b/drivers/media/video/cx18/cx18-io.h index 7ab7be2..197d4fb 100644 --- a/drivers/media/video/cx18/cx18-io.h +++ b/drivers/media/video/cx18/cx18-io.h @@ -31,102 +31,343 @@ static inline void cx18_io_delay(struct cx18 *cx) ndelay(cx->options.mmio_ndelay); } +/* + * Readback and retry of MMIO access for reliability: + * The concept was suggested by Steve Toth . + * The implmentation is the fault of Andy Walls . + */ + +/* Statistics gathering */ +static inline +void cx18_log_write_retries(struct cx18 *cx, int i, const void *addr) +{ + if (i > CX18_MAX_MMIO_RETRIES) + i = CX18_MAX_MMIO_RETRIES; + atomic_inc(&cx->mmio_stats.retried_write[i]); + return; +} + +static inline +void cx18_log_read_retries(struct cx18 *cx, int i, const void *addr) +{ + if (i > CX18_MAX_MMIO_RETRIES) + i = CX18_MAX_MMIO_RETRIES; + atomic_inc(&cx->mmio_stats.retried_read[i]); + return; +} + +void cx18_log_statistics(struct cx18 *cx); + /* Non byteswapping memory mapped IO */ -static inline void cx18_raw_writel(struct cx18 *cx, u32 val, void __iomem *addr) +static inline +void cx18_raw_writel_noretry(struct cx18 *cx, u32 val, void __iomem *addr) { __raw_writel(val, addr); cx18_io_delay(cx); } -static inline u32 cx18_raw_readl(struct cx18 *cx, const void __iomem *addr) +void cx18_raw_writel_retry(struct cx18 *cx, u32 val, void __iomem *addr); + +static inline void cx18_raw_writel(struct cx18 *cx, u32 val, void __iomem *addr) +{ + if (cx18_retry_mmio) + cx18_raw_writel_retry(cx, val, addr); + else + cx18_raw_writel_noretry(cx, val, addr); +} + + +static inline +u32 cx18_raw_readl_noretry(struct cx18 *cx, const void __iomem *addr) { u32 ret = __raw_readl(addr); cx18_io_delay(cx); return ret; } -static inline u16 cx18_raw_readw(struct cx18 *cx, const void __iomem *addr) +u32 cx18_raw_readl_retry(struct cx18 *cx, const void __iomem *addr); + +static inline u32 cx18_raw_readl(struct cx18 *cx, const void __iomem *addr) +{ + if (cx18_retry_mmio) + return cx18_raw_readl_retry(cx, addr); + + return cx18_raw_readl_noretry(cx, addr); +} + + +static inline +u16 cx18_raw_readw_noretry(struct cx18 *cx, const void __iomem *addr) { u16 ret = __raw_readw(addr); cx18_io_delay(cx); return ret; } +u16 cx18_raw_readw_retry(struct cx18 *cx, const void __iomem *addr); + +static inline u16 cx18_raw_readw(struct cx18 *cx, const void __iomem *addr) +{ + if (cx18_retry_mmio) + return cx18_raw_readw_retry(cx, addr); + + return cx18_raw_readw_noretry(cx, addr); +} + + /* Normal memory mapped IO */ -static inline void cx18_writel(struct cx18 *cx, u32 val, void __iomem *addr) +static inline +void cx18_writel_noretry(struct cx18 *cx, u32 val, void __iomem *addr) { writel(val, addr); cx18_io_delay(cx); } -static inline void cx18_writew(struct cx18 *cx, u16 val, void __iomem *addr) +void cx18_writel_retry(struct cx18 *cx, u32 val, void __iomem *addr); + +static inline void cx18_writel(struct cx18 *cx, u32 val, void __iomem *addr) +{ + if (cx18_retry_mmio) + cx18_writel_retry(cx, val, addr); + else + cx18_writel_noretry(cx, val, addr); +} + + +static inline +void cx18_writew_noretry(struct cx18 *cx, u16 val, void __iomem *addr) { writew(val, addr); cx18_io_delay(cx); } -static inline void cx18_writeb(struct cx18 *cx, u8 val, void __iomem *addr) +void cx18_writew_retry(struct cx18 *cx, u16 val, void __iomem *addr); + +static inline void cx18_writew(struct cx18 *cx, u16 val, void __iomem *addr) +{ + if (cx18_retry_mmio) + cx18_writew_retry(cx, val, addr); + else + cx18_writew_noretry(cx, val, addr); +} + + +static inline +void cx18_writeb_noretry(struct cx18 *cx, u8 val, void __iomem *addr) { writeb(val, addr); cx18_io_delay(cx); } -static inline u32 cx18_readl(struct cx18 *cx, const void __iomem *addr) +void cx18_writeb_retry(struct cx18 *cx, u8 val, void __iomem *addr); + +static inline void cx18_writeb(struct cx18 *cx, u8 val, void __iomem *addr) +{ + if (cx18_retry_mmio) + cx18_writeb_retry(cx, val, addr); + else + cx18_writeb_noretry(cx, val, addr); +} + + +static inline u32 cx18_readl_noretry(struct cx18 *cx, const void __iomem *addr) { u32 ret = readl(addr); cx18_io_delay(cx); return ret; } -static inline u8 cx18_readb(struct cx18 *cx, const void __iomem *addr) +u32 cx18_readl_retry(struct cx18 *cx, const void __iomem *addr); + +static inline u32 cx18_readl(struct cx18 *cx, const void __iomem *addr) +{ + if (cx18_retry_mmio) + return cx18_readl_retry(cx, addr); + + return cx18_readl_noretry(cx, addr); +} + + +static inline u16 cx18_readw_noretry(struct cx18 *cx, const void __iomem *addr) +{ + u16 ret = readw(addr); + cx18_io_delay(cx); + return ret; +} + +u16 cx18_readw_retry(struct cx18 *cx, const void __iomem *addr); + +static inline u16 cx18_readw(struct cx18 *cx, const void __iomem *addr) +{ + if (cx18_retry_mmio) + return cx18_readw_retry(cx, addr); + + return cx18_readw_noretry(cx, addr); +} + + +static inline u8 cx18_readb_noretry(struct cx18 *cx, const void __iomem *addr) { u8 ret = readb(addr); cx18_io_delay(cx); return ret; } +u8 cx18_readb_retry(struct cx18 *cx, const void __iomem *addr); + +static inline u8 cx18_readb(struct cx18 *cx, const void __iomem *addr) +{ + if (cx18_retry_mmio) + return cx18_readb_retry(cx, addr); + + return cx18_readb_noretry(cx, addr); +} + + +static inline +u32 cx18_write_sync_noretry(struct cx18 *cx, u32 val, void __iomem *addr) +{ + cx18_writel_noretry(cx, val, addr); + return cx18_readl_noretry(cx, addr); +} + +static inline +u32 cx18_write_sync_retry(struct cx18 *cx, u32 val, void __iomem *addr) +{ + cx18_writel_retry(cx, val, addr); + return cx18_readl_retry(cx, addr); +} + static inline u32 cx18_write_sync(struct cx18 *cx, u32 val, void __iomem *addr) { - cx18_writel(cx, val, addr); - return cx18_readl(cx, addr); + if (cx18_retry_mmio) + return cx18_write_sync_retry(cx, val, addr); + + return cx18_write_sync_noretry(cx, val, addr); } + void cx18_memcpy_fromio(struct cx18 *cx, void *to, const void __iomem *from, unsigned int len); void cx18_memset_io(struct cx18 *cx, void __iomem *addr, int val, size_t count); + /* Access "register" region of CX23418 memory mapped I/O */ +static inline void cx18_write_reg_noretry(struct cx18 *cx, u32 val, u32 reg) +{ + cx18_writel_noretry(cx, val, cx->reg_mem + reg); +} + +static inline void cx18_write_reg_retry(struct cx18 *cx, u32 val, u32 reg) +{ + cx18_writel_retry(cx, val, cx->reg_mem + reg); +} + static inline void cx18_write_reg(struct cx18 *cx, u32 val, u32 reg) { - cx18_writel(cx, val, cx->reg_mem + reg); + if (cx18_retry_mmio) + cx18_write_reg_retry(cx, val, reg); + else + cx18_write_reg_noretry(cx, val, reg); +} + + +static inline u32 cx18_read_reg_noretry(struct cx18 *cx, u32 reg) +{ + return cx18_readl_noretry(cx, cx->reg_mem + reg); +} + +static inline u32 cx18_read_reg_retry(struct cx18 *cx, u32 reg) +{ + return cx18_readl_retry(cx, cx->reg_mem + reg); } static inline u32 cx18_read_reg(struct cx18 *cx, u32 reg) { - return cx18_readl(cx, cx->reg_mem + reg); + if (cx18_retry_mmio) + return cx18_read_reg_retry(cx, reg); + + return cx18_read_reg_noretry(cx, reg); +} + + +static inline u32 cx18_write_reg_sync_noretry(struct cx18 *cx, u32 val, u32 reg) +{ + return cx18_write_sync_noretry(cx, val, cx->reg_mem + reg); +} + +static inline u32 cx18_write_reg_sync_retry(struct cx18 *cx, u32 val, u32 reg) +{ + return cx18_write_sync_retry(cx, val, cx->reg_mem + reg); } static inline u32 cx18_write_reg_sync(struct cx18 *cx, u32 val, u32 reg) { - return cx18_write_sync(cx, val, cx->reg_mem + reg); + if (cx18_retry_mmio) + return cx18_write_reg_sync_retry(cx, val, reg); + + return cx18_write_reg_sync_noretry(cx, val, reg); } + /* Access "encoder memory" region of CX23418 memory mapped I/O */ +static inline void cx18_write_enc_noretry(struct cx18 *cx, u32 val, u32 addr) +{ + cx18_writel_noretry(cx, val, cx->enc_mem + addr); +} + +static inline void cx18_write_enc_retry(struct cx18 *cx, u32 val, u32 addr) +{ + cx18_writel_retry(cx, val, cx->enc_mem + addr); +} + static inline void cx18_write_enc(struct cx18 *cx, u32 val, u32 addr) { - cx18_writel(cx, val, cx->enc_mem + addr); + if (cx18_retry_mmio) + cx18_write_enc_retry(cx, val, addr); + else + cx18_write_enc_noretry(cx, val, addr); +} + + +static inline u32 cx18_read_enc_noretry(struct cx18 *cx, u32 addr) +{ + return cx18_readl_noretry(cx, cx->enc_mem + addr); +} + +static inline u32 cx18_read_enc_retry(struct cx18 *cx, u32 addr) +{ + return cx18_readl_retry(cx, cx->enc_mem + addr); } static inline u32 cx18_read_enc(struct cx18 *cx, u32 addr) { - return cx18_readl(cx, cx->enc_mem + addr); + if (cx18_retry_mmio) + return cx18_read_enc_retry(cx, addr); + + return cx18_read_enc_noretry(cx, addr); +} + +static inline +u32 cx18_write_enc_sync_noretry(struct cx18 *cx, u32 val, u32 addr) +{ + return cx18_write_sync_noretry(cx, val, cx->enc_mem + addr); } -static inline u32 cx18_write_enc_sync(struct cx18 *cx, u32 val, u32 addr) +static inline +u32 cx18_write_enc_sync_retry(struct cx18 *cx, u32 val, u32 addr) { - return cx18_write_sync(cx, val, cx->enc_mem + addr); + return cx18_write_sync_retry(cx, val, cx->enc_mem + addr); } +static inline +u32 cx18_write_enc_sync(struct cx18 *cx, u32 val, u32 addr) +{ + if (cx18_retry_mmio) + return cx18_write_enc_sync_retry(cx, val, addr); + + return cx18_write_enc_sync_noretry(cx, val, addr); +} void cx18_sw1_irq_enable(struct cx18 *cx, u32 val); void cx18_sw1_irq_disable(struct cx18 *cx, u32 val); @@ -134,7 +375,4 @@ void cx18_sw2_irq_enable(struct cx18 *cx, u32 val); void cx18_sw2_irq_disable(struct cx18 *cx, u32 val); void cx18_setup_page(struct cx18 *cx, u32 addr); -/* Tries to recover from the CX23418 responding improperly on the PCI bus */ -int cx18_pci_try_recover(struct cx18 *cx); - #endif /* CX18_IO_H */ diff --git a/drivers/media/video/cx18/cx18-ioctl.c b/drivers/media/video/cx18/cx18-ioctl.c index 4a47f61..83aa9cb 100644 --- a/drivers/media/video/cx18/cx18-ioctl.c +++ b/drivers/media/video/cx18/cx18-ioctl.c @@ -752,6 +752,7 @@ static int cx18_log_status(struct file *file, void *fh) CX18_INFO("Read MPEG/VBI: %lld/%lld bytes\n", (long long)cx->mpg_data_received, (long long)cx->vbi_data_inserted); + cx18_log_statistics(cx); CX18_INFO("================== END STATUS CARD #%d ==================\n", cx->num); return 0; } -- cgit v0.10.2 From 1e758265f4df731fcd20e559af3a8eb849db3b4d Mon Sep 17 00:00:00 2001 From: Andy Walls Date: Fri, 3 Oct 2008 13:49:05 -0300 Subject: V4L/DVB (9111): cx18: Up the version to 1.0.1 cx18: Up the version to 1.0.1. This will make it easy to tell if retries of MMIO access are implemented or not in trouble reports. First course of action for I2C and other initialization problem reports will be to have user upgrade to v1.0.1 of driver. Signed-off-by: Andy Walls Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/cx18/cx18-version.h b/drivers/media/video/cx18/cx18-version.h index d5c7a6f..9f6be2d 100644 --- a/drivers/media/video/cx18/cx18-version.h +++ b/drivers/media/video/cx18/cx18-version.h @@ -25,7 +25,7 @@ #define CX18_DRIVER_NAME "cx18" #define CX18_DRIVER_VERSION_MAJOR 1 #define CX18_DRIVER_VERSION_MINOR 0 -#define CX18_DRIVER_VERSION_PATCHLEVEL 0 +#define CX18_DRIVER_VERSION_PATCHLEVEL 1 #define CX18_VERSION __stringify(CX18_DRIVER_VERSION_MAJOR) "." __stringify(CX18_DRIVER_VERSION_MINOR) "." __stringify(CX18_DRIVER_VERSION_PATCHLEVEL) #define CX18_DRIVER_VERSION KERNEL_VERSION(CX18_DRIVER_VERSION_MAJOR, \ -- cgit v0.10.2 From 028165a336ab7d097d23e2af936dea373e3d3afc Mon Sep 17 00:00:00 2001 From: Hermann Pitton Date: Sat, 4 Oct 2008 21:37:36 -0300 Subject: V4L/DVB (9113): saa7134: fixes for the Asus Tiger Revision 1.00 In opposite to the P7131 Dual this early OEM card has a male radio antenna connector and also no remote. We currently switch the DVB-T RF feed to the radio input, like on the P7131 with female radio connector used also for DVB-T and should improve this. Signed-off-by: Hermann Pitton Signed-off-by: Mauro Carvalho Chehab diff --git a/Documentation/video4linux/CARDLIST.saa7134 b/Documentation/video4linux/CARDLIST.saa7134 index 727b5f2..dc67eef 100644 --- a/Documentation/video4linux/CARDLIST.saa7134 +++ b/Documentation/video4linux/CARDLIST.saa7134 @@ -76,7 +76,7 @@ 75 -> AVerMedia AVerTVHD MCE A180 [1461:1044] 76 -> SKNet MonsterTV Mobile [1131:4ee9] 77 -> Pinnacle PCTV 40i/50i/110i (saa7133) [11bd:002e] - 78 -> ASUSTeK P7131 Dual [1043:4862,1043:4857] + 78 -> ASUSTeK P7131 Dual [1043:4862] 79 -> Sedna/MuchTV PC TV Cardbus TV/Radio (ITO25 Rev:2B) 80 -> ASUS Digimatrix TV [1043:0210] 81 -> Philips Tiger reference design [1131:2018] @@ -150,3 +150,4 @@ 149 -> Avermedia PCI pure analog (M135A) [1461:f11d] 150 -> Zogis Real Angel 220 151 -> ADS Tech Instant HDTV [1421:0380] +152 -> Asus Tiger Rev:1.00 [1043:4857] diff --git a/drivers/media/video/saa7134/saa7134-cards.c b/drivers/media/video/saa7134/saa7134-cards.c index a2653b8..c9392c4 100644 --- a/drivers/media/video/saa7134/saa7134-cards.c +++ b/drivers/media/video/saa7134/saa7134-cards.c @@ -4527,7 +4527,7 @@ struct saa7134_board saa7134_boards[] = { .amux = LINE2, .tv = 1, .gpio = 0x624000, - }, { + }, { .name = name_comp1, .vmux = 1, .amux = LINE1, @@ -4564,14 +4564,48 @@ struct saa7134_board saa7134_boards[] = { .tv = 1, }, { .name = name_comp, - .vmux = 4, - .amux = LINE1, + .vmux = 4, + .amux = LINE1, }, { .name = name_svideo, .vmux = 8, .amux = LINE1, } }, }, + [SAA7134_BOARD_ASUSTeK_TIGER] = { + .name = "Asus Tiger Rev:1.00", + .audio_clock = 0x00187de7, + .tuner_type = TUNER_PHILIPS_TDA8290, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .tuner_config = 0, + .mpeg = SAA7134_MPEG_DVB, + .gpiomask = 0x0200000, + .inputs = { { + .name = name_tv, + .vmux = 1, + .amux = TV, + .tv = 1, + }, { + .name = name_comp1, + .vmux = 3, + .amux = LINE2, + }, { + .name = name_comp2, + .vmux = 0, + .amux = LINE2, + }, { + .name = name_svideo, + .vmux = 8, + .amux = LINE2, + } }, + .radio = { + .name = name_radio, + .amux = TV, + .gpio = 0x0200000, + }, + }, }; const unsigned int saa7134_bcount = ARRAY_SIZE(saa7134_boards); @@ -5358,8 +5392,8 @@ struct pci_device_id saa7134_pci_tbl[] = { .vendor = PCI_VENDOR_ID_PHILIPS, .device = PCI_DEVICE_ID_PHILIPS_SAA7133, .subvendor = 0x1043, - .subdevice = 0x4857, - .driver_data = SAA7134_BOARD_ASUSTeK_P7131_DUAL, + .subdevice = 0x4857, /* REV:1.00 */ + .driver_data = SAA7134_BOARD_ASUSTeK_TIGER, },{ .vendor = PCI_VENDOR_ID_PHILIPS, .device = PCI_DEVICE_ID_PHILIPS_SAA7134, @@ -6177,6 +6211,7 @@ int saa7134_board_init2(struct saa7134_dev *dev) case SAA7134_BOARD_PINNACLE_PCTV_310i: case SAA7134_BOARD_KWORLD_DVBT_210: case SAA7134_BOARD_TEVION_DVBT_220RF: + case SAA7134_BOARD_ASUSTeK_TIGER: case SAA7134_BOARD_ASUSTeK_P7131_DUAL: case SAA7134_BOARD_ASUSTeK_P7131_HYBRID_LNA: case SAA7134_BOARD_MEDION_MD8800_QUADRO: diff --git a/drivers/media/video/saa7134/saa7134-dvb.c b/drivers/media/video/saa7134/saa7134-dvb.c index 2c51857..87c1098 100644 --- a/drivers/media/video/saa7134/saa7134-dvb.c +++ b/drivers/media/video/saa7134/saa7134-dvb.c @@ -1335,6 +1335,11 @@ static int dvb_init(struct saa7134_dev *dev) } } break; + case SAA7134_BOARD_ASUSTeK_TIGER: + if (configure_tda827x_fe(dev, &philips_tiger_config, + &tda827x_cfg_0) < 0) + goto dettach_frontend; + break; default: wprintk("Huh? unknown DVB card?\n"); break; diff --git a/drivers/media/video/saa7134/saa7134.h b/drivers/media/video/saa7134/saa7134.h index 0907c70..491ab1f 100644 --- a/drivers/media/video/saa7134/saa7134.h +++ b/drivers/media/video/saa7134/saa7134.h @@ -274,6 +274,7 @@ struct saa7134_format { #define SAA7134_BOARD_AVERMEDIA_M135A 149 #define SAA7134_BOARD_REAL_ANGEL_220 150 #define SAA7134_BOARD_ADS_INSTANT_HDTV_PCI 151 +#define SAA7134_BOARD_ASUSTeK_TIGER 152 #define SAA7134_MAXBOARDS 8 #define SAA7134_INPUT_MAX 8 -- cgit v0.10.2 From da703d6262b5d168a4ceb427255cfcf3771b8f96 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Tue, 2 Sep 2008 19:00:21 -0300 Subject: V4L/DVB (8904): cx88: add missing unlock_kernel sparse found an unbalanced BKL usage. Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/cx88/cx88-blackbird.c b/drivers/media/video/cx88/cx88-blackbird.c index 1b7e2e4..e713697 100644 --- a/drivers/media/video/cx88/cx88-blackbird.c +++ b/drivers/media/video/cx88/cx88-blackbird.c @@ -1073,6 +1073,7 @@ static int mpeg_open(struct inode *inode, struct file *file) err = drv->request_acquire(drv); if(err != 0) { dprintk(1,"%s: Unable to acquire hardware, %d\n", __func__, err); + unlock_kernel(); return err; } } -- cgit v0.10.2 From 79025a9ed9132880d5197611dec6d8533c121ac7 Mon Sep 17 00:00:00 2001 From: Devin Heitmueller Date: Mon, 6 Oct 2008 12:07:48 -0300 Subject: V4L/DVB (9114): dib0700: fix bad assignment of dib0700_xc5000_tuner_callback after return call Put callback definition before function return and cleanup callback: Fix a bug where the xc5000 callback was being set *after* the return call (essentially resulting in dead code). Also cleanup the callback function to detect unknown commands. Signed-off-by: Devin Heitmueller Signed-off-by: Michael Krufky Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/dvb/dvb-usb/dib0700_devices.c b/drivers/media/dvb/dvb-usb/dib0700_devices.c index 9891ca0..0cfccc24 100644 --- a/drivers/media/dvb/dvb-usb/dib0700_devices.c +++ b/drivers/media/dvb/dvb-usb/dib0700_devices.c @@ -1181,11 +1181,16 @@ static int dib0700_xc5000_tuner_callback(void *priv, int component, { struct dvb_usb_adapter *adap = priv; - /* Reset the tuner */ - dib0700_set_gpio(adap->dev, GPIO1, GPIO_OUT, 0); - msleep(330); /* from Windows USB trace */ - dib0700_set_gpio(adap->dev, GPIO1, GPIO_OUT, 1); - msleep(330); /* from Windows USB trace */ + if (command == XC5000_TUNER_RESET) { + /* Reset the tuner */ + dib0700_set_gpio(adap->dev, GPIO1, GPIO_OUT, 0); + msleep(330); /* from Windows USB trace */ + dib0700_set_gpio(adap->dev, GPIO1, GPIO_OUT, 1); + msleep(330); /* from Windows USB trace */ + } else { + err("xc5000: unknown tuner callback command: %d\n", command); + return -EINVAL; + } return 0; } @@ -1197,12 +1202,12 @@ static struct xc5000_config s5h1411_xc5000_tunerconfig = { static int xc5000_tuner_attach(struct dvb_usb_adapter *adap) { + /* FIXME: generalize & move to common area */ + adap->fe->callback = dib0700_xc5000_tuner_callback; + return dvb_attach(xc5000_attach, adap->fe, &adap->dev->i2c_adap, &s5h1411_xc5000_tunerconfig) == NULL ? -ENODEV : 0; - - /* FIXME: generalize & move to common area */ - adap->fe->callback = dib0700_xc5000_tuner_callback; } /* DVB-USB and USB stuff follows */ -- cgit v0.10.2 From a482f327ff56bc3cf53176a7eb736cea47291a1d Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Fri, 10 Oct 2008 05:08:23 -0300 Subject: V4L/DVB (9116): USB: remove info() macro from usb media drivers USB should not be having it's own printk macros, so remove info() and use the system-wide standard of dev_info() wherever possible. Cc: Douglas Landgraf Cc: Mike Isely Cc: Thierry Merle Cc: Antoine Jacquet Signed-off-by: Greg Kroah-Hartman Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/radio/dsbr100.c b/drivers/media/radio/dsbr100.c index 0f06e6f..b3a5cb1 100644 --- a/drivers/media/radio/dsbr100.c +++ b/drivers/media/radio/dsbr100.c @@ -510,7 +510,8 @@ static int usb_dsbr100_probe(struct usb_interface *intf, static int __init dsbr100_init(void) { int retval = usb_register(&usb_dsbr100_driver); - info(DRIVER_VERSION ":" DRIVER_DESC); + printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":" + DRIVER_DESC "\n"); return retval; } diff --git a/drivers/media/video/dabusb.c b/drivers/media/video/dabusb.c index 79faedf5..3aa538a 100644 --- a/drivers/media/video/dabusb.c +++ b/drivers/media/video/dabusb.c @@ -866,7 +866,8 @@ static int __init dabusb_init (void) dbg("dabusb_init: driver registered"); - info(DRIVER_VERSION ":" DRIVER_DESC); + printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":" + DRIVER_DESC "\n"); out: return retval; diff --git a/drivers/media/video/ov511.c b/drivers/media/video/ov511.c index c685240..935d73d 100644 --- a/drivers/media/video/ov511.c +++ b/drivers/media/video/ov511.c @@ -974,14 +974,14 @@ dump_i2c_range(struct usb_ov511 *ov, int reg1, int regn) for (i = reg1; i <= regn; i++) { rc = i2c_r(ov, i); - info("Sensor[0x%02X] = 0x%02X", i, rc); + dev_info(&ov->dev->dev, "Sensor[0x%02X] = 0x%02X\n", i, rc); } } static void dump_i2c_regs(struct usb_ov511 *ov) { - info("I2C REGS"); + dev_info(&ov->dev->dev, "I2C REGS\n"); dump_i2c_range(ov, 0x00, 0x7C); } @@ -992,28 +992,28 @@ dump_reg_range(struct usb_ov511 *ov, int reg1, int regn) for (i = reg1; i <= regn; i++) { rc = reg_r(ov, i); - info("OV511[0x%02X] = 0x%02X", i, rc); + dev_info(&ov->dev->dev, "OV511[0x%02X] = 0x%02X\n", i, rc); } } static void ov511_dump_regs(struct usb_ov511 *ov) { - info("CAMERA INTERFACE REGS"); + dev_info(&ov->dev->dev, "CAMERA INTERFACE REGS\n"); dump_reg_range(ov, 0x10, 0x1f); - info("DRAM INTERFACE REGS"); + dev_info(&ov->dev->dev, "DRAM INTERFACE REGS\n"); dump_reg_range(ov, 0x20, 0x23); - info("ISO FIFO REGS"); + dev_info(&ov->dev->dev, "ISO FIFO REGS\n"); dump_reg_range(ov, 0x30, 0x31); - info("PIO REGS"); + dev_info(&ov->dev->dev, "PIO REGS\n"); dump_reg_range(ov, 0x38, 0x39); dump_reg_range(ov, 0x3e, 0x3e); - info("I2C REGS"); + dev_info(&ov->dev->dev, "I2C REGS\n"); dump_reg_range(ov, 0x40, 0x49); - info("SYSTEM CONTROL REGS"); + dev_info(&ov->dev->dev, "SYSTEM CONTROL REGS\n"); dump_reg_range(ov, 0x50, 0x55); dump_reg_range(ov, 0x5e, 0x5f); - info("OmniCE REGS"); + dev_info(&ov->dev->dev, "OmniCE REGS\n"); dump_reg_range(ov, 0x70, 0x79); /* NOTE: Quantization tables are not readable. You will get the value * in reg. 0x79 for every table register */ @@ -1025,25 +1025,25 @@ ov511_dump_regs(struct usb_ov511 *ov) static void ov518_dump_regs(struct usb_ov511 *ov) { - info("VIDEO MODE REGS"); + dev_info(&ov->dev->dev, "VIDEO MODE REGS\n"); dump_reg_range(ov, 0x20, 0x2f); - info("DATA PUMP AND SNAPSHOT REGS"); + dev_info(&ov->dev->dev, "DATA PUMP AND SNAPSHOT REGS\n"); dump_reg_range(ov, 0x30, 0x3f); - info("I2C REGS"); + dev_info(&ov->dev->dev, "I2C REGS\n"); dump_reg_range(ov, 0x40, 0x4f); - info("SYSTEM CONTROL AND VENDOR REGS"); + dev_info(&ov->dev->dev, "SYSTEM CONTROL AND VENDOR REGS\n"); dump_reg_range(ov, 0x50, 0x5f); - info("60 - 6F"); + dev_info(&ov->dev->dev, "60 - 6F\n"); dump_reg_range(ov, 0x60, 0x6f); - info("70 - 7F"); + dev_info(&ov->dev->dev, "70 - 7F\n"); dump_reg_range(ov, 0x70, 0x7f); - info("Y QUANTIZATION TABLE"); + dev_info(&ov->dev->dev, "Y QUANTIZATION TABLE\n"); dump_reg_range(ov, 0x80, 0x8f); - info("UV QUANTIZATION TABLE"); + dev_info(&ov->dev->dev, "UV QUANTIZATION TABLE\n"); dump_reg_range(ov, 0x90, 0x9f); - info("A0 - BF"); + dev_info(&ov->dev->dev, "A0 - BF\n"); dump_reg_range(ov, 0xa0, 0xbf); - info("CBR"); + dev_info(&ov->dev->dev, "CBR\n"); dump_reg_range(ov, 0xc0, 0xcf); } #endif @@ -3205,9 +3205,10 @@ ov511_move_data(struct usb_ov511 *ov, unsigned char *in, int n) */ if (printph) { - info("ph(%3d): %2x %2x %2x %2x %2x %2x %2x %2x %2x %2x %2x %2x", - pnum, in[0], in[1], in[2], in[3], in[4], in[5], in[6], - in[7], in[8], in[9], in[10], in[11]); + dev_info(&ov->dev->dev, + "ph(%3d): %2x %2x %2x %2x %2x %2x %2x %2x %2x %2x %2x %2x\n", + pnum, in[0], in[1], in[2], in[3], in[4], in[5], in[6], + in[7], in[8], in[9], in[10], in[11]); } /* Check for SOF/EOF packet */ @@ -3366,8 +3367,10 @@ ov518_move_data(struct usb_ov511 *ov, unsigned char *in, int n) * the definitive SOF/EOF format */ if ((!(in[0] | in[1] | in[2] | in[3] | in[5])) && in[6]) { if (printph) { - info("ph: %2x %2x %2x %2x %2x %2x %2x %2x", in[0], - in[1], in[2], in[3], in[4], in[5], in[6], in[7]); + dev_info(&ov->dev->dev, + "ph: %2x %2x %2x %2x %2x %2x %2x %2x\n", + in[0], in[1], in[2], in[3], in[4], in[5], + in[6], in[7]); } if (frame->scanstate == STATE_LINES) { @@ -3646,14 +3649,16 @@ ov51x_init_isoc(struct usb_ov511 *ov) if (packetsize == -1) { ov518_set_packet_size(ov, 640); } else { - info("Forcing packet size to %d", packetsize); + dev_info(&ov->dev->dev, "Forcing packet size to %d\n", + packetsize); ov518_set_packet_size(ov, packetsize); } } else { if (packetsize == -1) { ov511_set_packet_size(ov, size); } else { - info("Forcing packet size to %d", packetsize); + dev_info(&ov->dev->dev, "Forcing packet size to %d\n", + packetsize); ov511_set_packet_size(ov, packetsize); } } @@ -4121,7 +4126,7 @@ ov51x_v4l1_ioctl_internal(struct inode *inode, struct file *file, return -EIO; if (force_palette && p->palette != force_palette) { - info("Palette rejected (%s)", + dev_info(&ov->dev->dev, "Palette rejected (%s)\n", symbolic(v4l1_plist, p->palette)); return -EINVAL; } @@ -4849,26 +4854,27 @@ ov7xx0_configure(struct usb_ov511 *ov) err("Error detecting sensor type"); return -1; } else if ((rc & 3) == 3) { - info("Sensor is an OV7610"); + dev_info(&ov->dev->dev, "Sensor is an OV7610\n"); ov->sensor = SEN_OV7610; } else if ((rc & 3) == 1) { /* I don't know what's different about the 76BE yet. */ if (i2c_r(ov, 0x15) & 1) - info("Sensor is an OV7620AE"); + dev_info(&ov->dev->dev, "Sensor is an OV7620AE\n"); else - info("Sensor is an OV76BE"); + dev_info(&ov->dev->dev, "Sensor is an OV76BE\n"); /* OV511+ will return all zero isoc data unless we * configure the sensor as a 7620. Someone needs to * find the exact reg. setting that causes this. */ if (ov->bridge == BRG_OV511PLUS) { - info("Enabling 511+/7620AE workaround"); + dev_info(&ov->dev->dev, + "Enabling 511+/7620AE workaround\n"); ov->sensor = SEN_OV7620; } else { ov->sensor = SEN_OV76BE; } } else if ((rc & 3) == 0) { - info("Sensor is an OV7620"); + dev_info(&ov->dev->dev, "Sensor is an OV7620\n"); ov->sensor = SEN_OV7620; } else { err("Unknown image sensor version: %d", rc & 3); @@ -5024,16 +5030,16 @@ ov6xx0_configure(struct usb_ov511 *ov) if ((rc & 3) == 0) { ov->sensor = SEN_OV6630; - info("Sensor is an OV6630"); + dev_info(&ov->dev->dev, "Sensor is an OV6630\n"); } else if ((rc & 3) == 1) { ov->sensor = SEN_OV6620; - info("Sensor is an OV6620"); + dev_info(&ov->dev->dev, "Sensor is an OV6620\n"); } else if ((rc & 3) == 2) { ov->sensor = SEN_OV6630; - info("Sensor is an OV6630AE"); + dev_info(&ov->dev->dev, "Sensor is an OV6630AE\n"); } else if ((rc & 3) == 3) { ov->sensor = SEN_OV6630; - info("Sensor is an OV6630AF"); + dev_info(&ov->dev->dev, "Sensor is an OV6630AF\n"); } /* Set sensor-specific vars */ @@ -5088,10 +5094,10 @@ ks0127_configure(struct usb_ov511 *ov) err("Error detecting sensor type"); return -1; } else if ((rc & 0x0f) == 0) { - info("Sensor is a KS0127"); + dev_info(&ov->dev->dev, "Sensor is a KS0127\n"); ov->sensor = SEN_KS0127; } else if ((rc & 0x0f) == 9) { - info("Sensor is a KS0127B Rev. A"); + dev_info(&ov->dev->dev, "Sensor is a KS0127B Rev. A\n"); ov->sensor = SEN_KS0127B; } } else { @@ -5200,7 +5206,8 @@ saa7111a_configure(struct usb_ov511 *ov) err("Error detecting sensor version"); return -1; } else { - info("Sensor is an SAA7111A (version 0x%x)", rc); + dev_info(&ov->dev->dev, + "Sensor is an SAA7111A (version 0x%x)\n", rc); ov->sensor = SEN_SAA7111A; } @@ -5262,7 +5269,7 @@ ov511_configure(struct usb_ov511 *ov) PDEBUG (1, "CustomID = %d", ov->customid); ov->desc = symbolic(camlist, ov->customid); - info("model: %s", ov->desc); + dev_info(&ov->dev->dev, "model: %s\n", ov->desc); if (0 == strcmp(ov->desc, NOT_DEFINED_STR)) { err("Camera type (%d) not recognized", ov->customid); @@ -5426,7 +5433,8 @@ ov518_configure(struct usb_ov511 *ov) PDEBUG(4, ""); /* First 5 bits of custom ID reg are a revision ID on OV518 */ - info("Device revision %d", 0x1F & reg_r(ov, R511_SYS_CUST_ID)); + dev_info(&ov->dev->dev, "Device revision %d\n", + 0x1F & reg_r(ov, R511_SYS_CUST_ID)); /* Give it the default description */ ov->desc = symbolic(camlist, 0); @@ -5773,7 +5781,8 @@ ov51x_probe(struct usb_interface *intf, const struct usb_device_id *id) goto error; } - info("USB %s video device found", symbolic(brglist, ov->bridge)); + dev_info(&intf->dev, "USB %s video device found\n", + symbolic(brglist, ov->bridge)); init_waitqueue_head(&ov->wq); @@ -5854,8 +5863,8 @@ ov51x_probe(struct usb_interface *intf, const struct usb_device_id *id) goto error; } - info("Device at %s registered to minor %d", ov->usb_path, - ov->vdev->minor); + dev_info(&intf->dev, "Device at %s registered to minor %d\n", + ov->usb_path, ov->vdev->minor); usb_set_intfdata(intf, ov); if (ov_create_sysfs(ov->vdev)) { @@ -5958,7 +5967,8 @@ usb_ov511_init(void) if (retval) goto out; - info(DRIVER_VERSION " : " DRIVER_DESC); + printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":" + DRIVER_DESC "\n"); out: return retval; @@ -5968,8 +5978,7 @@ static void __exit usb_ov511_exit(void) { usb_deregister(&ov511_driver); - info("driver deregistered"); - + printk(KERN_INFO KBUILD_MODNAME ": driver deregistered\n"); } module_init(usb_ov511_init); diff --git a/drivers/media/video/ov511.h b/drivers/media/video/ov511.h index baded12..70d99e5 100644 --- a/drivers/media/video/ov511.h +++ b/drivers/media/video/ov511.h @@ -12,7 +12,8 @@ #ifdef OV511_DEBUG #define PDEBUG(level, fmt, args...) \ - if (debug >= (level)) info("[%s:%d] " fmt, \ + if (debug >= (level)) \ + printk(KERN_INFO KBUILD_MODNAME "[%s:%d] \n" fmt, \ __func__, __LINE__ , ## args) #else #define PDEBUG(level, fmt, args...) do {} while(0) diff --git a/drivers/media/video/pvrusb2/pvrusb2-main.c b/drivers/media/video/pvrusb2/pvrusb2-main.c index ad0d98c..9b3c874 100644 --- a/drivers/media/video/pvrusb2/pvrusb2-main.c +++ b/drivers/media/video/pvrusb2/pvrusb2-main.c @@ -137,9 +137,11 @@ static int __init pvr_init(void) ret = usb_register(&pvr_driver); if (ret == 0) - info(DRIVER_DESC " : " DRIVER_VERSION); - if (pvrusb2_debug) info("Debug mask is %d (0x%x)", - pvrusb2_debug,pvrusb2_debug); + printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":" + DRIVER_DESC "\n"); + if (pvrusb2_debug) + printk(KERN_INFO KBUILD_MODNAME ": Debug mask is %d (0x%x)\n", + pvrusb2_debug,pvrusb2_debug); pvr2_trace(PVR2_TRACE_INIT,"pvr_init complete"); diff --git a/drivers/media/video/se401.c b/drivers/media/video/se401.c index b01f25d..ae39491 100644 --- a/drivers/media/video/se401.c +++ b/drivers/media/video/se401.c @@ -288,7 +288,7 @@ static void se401_button_irq(struct urb *urb) int status; if (!se401->dev) { - info("ohoh: device vapourished"); + dev_info(&urb->dev->dev, "device vapourished\n"); return; } @@ -328,7 +328,7 @@ static void se401_video_irq(struct urb *urb) return; if (!se401->dev) { - info ("ohoh: device vapourished"); + dev_info(&urb->dev->dev, "device vapourished\n"); return; } @@ -375,7 +375,7 @@ static void se401_video_irq(struct urb *urb) urb->status=0; urb->dev=se401->dev; if(usb_submit_urb(urb, GFP_KERNEL)) - info("urb burned down"); + dev_info(&urb->dev->dev, "urb burned down\n"); return; } @@ -860,7 +860,8 @@ static int se401_newframe(struct usb_se401 *se401, int framenr) ); if (se401->nullpackets > SE401_MAX_NULLPACKETS) { se401->nullpackets=0; - info("to many null length packets, restarting capture"); + dev_info(&se401->dev->dev, + "too many null length packets, restarting capture\n"); se401_stop_stream(se401); se401_start_stream(se401); } else { @@ -880,7 +881,8 @@ static int se401_newframe(struct usb_se401 *se401, int framenr) se401->scratch_use=0; if (errors > SE401_MAX_ERRORS) { errors=0; - info("to much errors, restarting capture"); + dev_info(&se401->dev->dev, + "too many errors, restarting capture\n"); se401_stop_stream(se401); se401_start_stream(se401); } @@ -913,7 +915,7 @@ static void usb_se401_remove_disconnected (struct usb_se401 *se401) usb_kill_urb(se401->inturb); usb_free_urb(se401->inturb); } - info("%s disconnected", se401->camera_name); + dev_info(&se401->dev->dev, "%s disconnected", se401->camera_name); /* Free the memory */ kfree(se401->width); @@ -960,8 +962,8 @@ static int se401_close(struct inode *inode, struct file *file) rvfree(se401->fbuf, se401->maxframesize * SE401_NUMFRAMES); if (se401->removed) { + dev_info(&se401->dev->dev, "device unregistered\n"); usb_se401_remove_disconnected(se401); - info("device unregistered"); } else { for (i=0; iframe[i].grabstate=FRAME_UNUSED; @@ -1276,7 +1278,7 @@ static int se401_init(struct usb_se401 *se401, int button) for (i=0; isizes; i++) { sprintf(temp, "%s %dx%d", temp, se401->width[i], se401->height[i]); } - info("%s", temp); + dev_info(&se401->dev->dev, "%s\n", temp); se401->maxframesize=se401->width[se401->sizes-1]*se401->height[se401->sizes-1]*3; rc=se401_sndctrl(0, se401, SE401_REQ_GET_WIDTH, 0, cp, sizeof(cp)); @@ -1310,7 +1312,8 @@ static int se401_init(struct usb_se401 *se401, int button) if (button) { se401->inturb=usb_alloc_urb(0, GFP_KERNEL); if (!se401->inturb) { - info("Allocation of inturb failed"); + dev_info(&se401->dev->dev, + "Allocation of inturb failed\n"); return 1; } usb_fill_int_urb(se401->inturb, se401->dev, @@ -1321,7 +1324,7 @@ static int se401_init(struct usb_se401 *se401, int button) 8 ); if (usb_submit_urb(se401->inturb, GFP_KERNEL)) { - info("int urb burned down"); + dev_info(&se401->dev->dev, "int urb burned down\n"); return 1; } } else @@ -1378,7 +1381,7 @@ static int se401_probe(struct usb_interface *intf, return -ENODEV; /* We found one */ - info("SE401 camera found: %s", camera_name); + dev_info(&intf->dev, "SE401 camera found: %s\n", camera_name); if ((se401 = kzalloc(sizeof(*se401), GFP_KERNEL)) == NULL) { err("couldn't kmalloc se401 struct"); @@ -1389,7 +1392,8 @@ static int se401_probe(struct usb_interface *intf, se401->iface = interface->bInterfaceNumber; se401->camera_name = camera_name; - info("firmware version: %02x", le16_to_cpu(dev->descriptor.bcdDevice) & 255); + dev_info(&intf->dev, "firmware version: %02x\n", + le16_to_cpu(dev->descriptor.bcdDevice) & 255); if (se401_init(se401, button)) { kfree(se401); @@ -1407,7 +1411,8 @@ static int se401_probe(struct usb_interface *intf, err("video_register_device failed"); return -EIO; } - info("registered new video device: video%d", se401->vdev.minor); + dev_info(&intf->dev, "registered new video device: video%d\n", + se401->vdev.minor); usb_set_intfdata (intf, se401); return 0; @@ -1451,10 +1456,10 @@ static struct usb_driver se401_driver = { static int __init usb_se401_init(void) { - info("SE401 usb camera driver version %s registering", version); + printk(KERN_INFO "SE401 usb camera driver version %s registering\n", version); if (flickerless) if (flickerless!=50 && flickerless!=60) { - info("Invallid flickerless value, use 0, 50 or 60."); + printk(KERN_ERR "Invallid flickerless value, use 0, 50 or 60.\n"); return -1; } return usb_register(&se401_driver); @@ -1463,7 +1468,7 @@ static int __init usb_se401_init(void) static void __exit usb_se401_exit(void) { usb_deregister(&se401_driver); - info("SE401 driver deregistered"); + printk(KERN_INFO "SE401 driver deregistered\frame"); } module_init(usb_se401_init); diff --git a/drivers/media/video/stv680.c b/drivers/media/video/stv680.c index b21a8d6..9c549d9 100644 --- a/drivers/media/video/stv680.c +++ b/drivers/media/video/stv680.c @@ -84,7 +84,8 @@ static unsigned int debug; #define PDEBUG(level, fmt, args...) \ do { \ if (debug >= level) \ - info("[%s:%d] " fmt, __func__, __LINE__ , ## args); \ + printk(KERN_INFO KBUILD_MODNAME " [%s:%d] \n" fmt, \ + __func__, __LINE__ , ## args); \ } while (0) @@ -1552,7 +1553,8 @@ static int __init usb_stv680_init (void) } PDEBUG (0, "STV(i): usb camera driver version %s registering", DRIVER_VERSION); - info(DRIVER_DESC " " DRIVER_VERSION); + printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":" + DRIVER_DESC "\n"); return 0; } diff --git a/drivers/media/video/usbvideo/ibmcam.c b/drivers/media/video/usbvideo/ibmcam.c index cc27efe..28421d3 100644 --- a/drivers/media/video/usbvideo/ibmcam.c +++ b/drivers/media/video/usbvideo/ibmcam.c @@ -258,7 +258,9 @@ static enum ParseState ibmcam_find_header(struct uvd *uvd) /* FIXME: Add frame h (RING_QUEUE_PEEK(&uvd->dp, 2) == 0x00)) { #if 0 /* This code helps to detect new frame markers */ - info("Header sig: 00 FF 00 %02X", RING_QUEUE_PEEK(&uvd->dp, 3)); + dev_info(&uvd->dev->dev, + "Header sig: 00 FF 00 %02X\n", + RING_QUEUE_PEEK(&uvd->dp, 3)); #endif frame->header = RING_QUEUE_PEEK(&uvd->dp, 3); if ((frame->header == HDRSIG_MODEL1_128x96) || @@ -266,7 +268,8 @@ static enum ParseState ibmcam_find_header(struct uvd *uvd) /* FIXME: Add frame h (frame->header == HDRSIG_MODEL1_352x288)) { #if 0 - info("Header found."); + dev_info(&uvd->dev->dev, + "Header found.\n"); #endif RING_QUEUE_DEQUEUE_BYTES(&uvd->dp, marker_len); icam->has_hdr = 1; @@ -295,7 +298,7 @@ case IBMCAM_MODEL_4: (RING_QUEUE_PEEK(&uvd->dp, 1) == 0xFF)) { #if 0 - info("Header found."); + dev_info(&uvd->dev->dev, "Header found.\n"); #endif RING_QUEUE_DEQUEUE_BYTES(&uvd->dp, marker_len); icam->has_hdr = 1; @@ -338,7 +341,7 @@ case IBMCAM_MODEL_4: byte4 = RING_QUEUE_PEEK(&uvd->dp, 3); frame->header = (byte3 << 8) | byte4; #if 0 - info("Header found."); + dev_info(&uvd->dev->dev, "Header found.\n"); #endif RING_QUEUE_DEQUEUE_BYTES(&uvd->dp, marker_len); icam->has_hdr = 1; @@ -354,7 +357,8 @@ case IBMCAM_MODEL_4: } if (!icam->has_hdr) { if (uvd->debug > 2) - info("Skipping frame, no header"); + dev_info(&uvd->dev->dev, + "Skipping frame, no header\n"); return scan_EndParse; } @@ -881,7 +885,9 @@ static enum ParseState ibmcam_model3_parse_lines( */ if ((frame->curline + 1) >= data_h) { if (uvd->debug >= 3) - info("Reached line %d. (frame is done)", frame->curline); + dev_info(&uvd->dev->dev, + "Reached line %d. (frame is done)\n", + frame->curline); return scan_NextFrame; } @@ -954,8 +960,9 @@ static enum ParseState ibmcam_model3_parse_lines( if (frame->curline >= VIDEOSIZE_Y(frame->request)) { if (uvd->debug >= 3) { - info("All requested lines (%ld.) done.", - VIDEOSIZE_Y(frame->request)); + dev_info(&uvd->dev->dev, + "All requested lines (%ld.) done.\n", + VIDEOSIZE_Y(frame->request)); } return scan_NextFrame; } else @@ -1000,7 +1007,9 @@ static enum ParseState ibmcam_model4_128x96_parse_lines( */ if ((frame->curline + 1) >= data_h) { if (uvd->debug >= 3) - info("Reached line %d. (frame is done)", frame->curline); + dev_info(&uvd->dev->dev, + "Reached line %d. (frame is done)\n", + frame->curline); return scan_NextFrame; } @@ -1049,8 +1058,9 @@ static enum ParseState ibmcam_model4_128x96_parse_lines( if (frame->curline >= VIDEOSIZE_Y(frame->request)) { if (uvd->debug >= 3) { - info("All requested lines (%ld.) done.", - VIDEOSIZE_Y(frame->request)); + dev_info(&uvd->dev->dev, + "All requested lines (%ld.) done.\n", + VIDEOSIZE_Y(frame->request)); } return scan_NextFrame; } else @@ -1171,10 +1181,11 @@ static int ibmcam_veio( sizeof(cp), 1000); #if 0 - info("USB => %02x%02x%02x%02x%02x%02x%02x%02x " - "(req=$%02x val=$%04x ind=$%04x)", - cp[0],cp[1],cp[2],cp[3],cp[4],cp[5],cp[6],cp[7], - req, value, index); + dev_info(&uvd->dev->dev, + "USB => %02x%02x%02x%02x%02x%02x%02x%02x " + "(req=$%02x val=$%04x ind=$%04x)\n", + cp[0],cp[1],cp[2],cp[3],cp[4],cp[5],cp[6],cp[7], + req, value, index); #endif } else { i = usb_control_msg( @@ -1449,10 +1460,9 @@ static void ibmcam_adjust_contrast(struct uvd *uvd) */ static void ibmcam_change_lighting_conditions(struct uvd *uvd) { - static const char proc[] = "ibmcam_change_lighting_conditions"; - if (debug > 0) - info("%s: Set lighting to %hu.", proc, lighting); + dev_info(&uvd->dev->dev, + "%s: Set lighting to %hu.\n", __func__, lighting); switch (IBMCAM_T(uvd)->camera_model) { case IBMCAM_MODEL_1: @@ -1495,8 +1505,6 @@ static void ibmcam_change_lighting_conditions(struct uvd *uvd) */ static void ibmcam_set_sharpness(struct uvd *uvd) { - static const char proc[] = "ibmcam_set_sharpness"; - switch (IBMCAM_T(uvd)->camera_model) { case IBMCAM_MODEL_1: { @@ -1505,7 +1513,8 @@ static void ibmcam_set_sharpness(struct uvd *uvd) RESTRICT_TO_RANGE(sharpness, SHARPNESS_MIN, SHARPNESS_MAX); if (debug > 0) - info("%s: Set sharpness to %hu.", proc, sharpness); + dev_info(&uvd->dev->dev, "%s: Set sharpness to %hu.\n", + __func__, sharpness); sv = sa[sharpness - SHARPNESS_MIN]; for (i=0; i < 2; i++) { @@ -1564,11 +1573,11 @@ static void ibmcam_set_sharpness(struct uvd *uvd) */ static void ibmcam_set_brightness(struct uvd *uvd) { - static const char proc[] = "ibmcam_set_brightness"; static const unsigned short n = 1; if (debug > 0) - info("%s: Set brightness to %hu.", proc, uvd->vpic.brightness); + dev_info(&uvd->dev->dev, "%s: Set brightness to %hu.\n", + __func__, uvd->vpic.brightness); switch (IBMCAM_T(uvd)->camera_model) { case IBMCAM_MODEL_1: @@ -2115,7 +2124,8 @@ static void ibmcam_model2_setup_after_video_if(struct uvd *uvd) break; } if (uvd->debug > 0) - info("Framerate (hardware): %hd.", hw_fps); + dev_info(&uvd->dev->dev, "Framerate (hardware): %hd.\n", + hw_fps); RESTRICT_TO_RANGE(hw_fps, 0, 31); ibmcam_model2_Packet1(uvd, mod2_set_framerate, hw_fps); } @@ -3487,7 +3497,7 @@ static void ibmcam_model3_setup_after_video_if(struct uvd *uvd) /* 01.01.08 - Added for RCA video in support -LO */ if(init_model3_input) { if (debug > 0) - info("Setting input to RCA."); + dev_info(&uvd->dev->dev, "Setting input to RCA.\n"); for (i=0; i < ARRAY_SIZE(initData); i++) { ibmcam_veio(uvd, initData[i].req, initData[i].value, initData[i].index); } @@ -3685,7 +3695,7 @@ static int ibmcam_probe(struct usb_interface *intf, const struct usb_device_id * unsigned char video_ep = 0; if (debug >= 1) - info("ibmcam_probe(%p,%u.)", intf, ifnum); + dev_info(&uvd->dev->dev, "ibmcam_probe(%p,%u.)\n", intf, ifnum); /* We don't handle multi-config cameras */ if (dev->descriptor.bNumConfigurations != 1) @@ -3736,14 +3746,16 @@ static int ibmcam_probe(struct usb_interface *intf, const struct usb_device_id * brand = "IBM PC Camera"; /* a.k.a. Xirlink C-It */ break; } - info("%s USB camera found (model %d, rev. 0x%04x)", - brand, model, le16_to_cpu(dev->descriptor.bcdDevice)); + dev_info(&uvd->dev->dev, + "%s USB camera found (model %d, rev. 0x%04x)\n", + brand, model, le16_to_cpu(dev->descriptor.bcdDevice)); } while (0); /* Validate found interface: must have one ISO endpoint */ nas = intf->num_altsetting; if (debug > 0) - info("Number of alternate settings=%d.", nas); + dev_info(&uvd->dev->dev, "Number of alternate settings=%d.\n", + nas); if (nas < 2) { err("Too few alternate settings for this camera!"); return -ENODEV; @@ -3787,7 +3799,9 @@ static int ibmcam_probe(struct usb_interface *intf, const struct usb_device_id * actInterface = i; maxPS = le16_to_cpu(endpoint->wMaxPacketSize); if (debug > 0) - info("Active setting=%d. maxPS=%d.", i, maxPS); + dev_info(&uvd->dev->dev, + "Active setting=%d. " + "maxPS=%d.\n", i, maxPS); } else err("More than one active alt. setting! Ignoring #%d.", i); } @@ -3826,7 +3840,7 @@ static int ibmcam_probe(struct usb_interface *intf, const struct usb_device_id * RESTRICT_TO_RANGE(framerate, 0, 5); break; default: - info("IBM camera: using 320x240"); + dev_info(&uvd->dev->dev, "IBM camera: using 320x240\n"); size = SIZE_320x240; /* No break here */ case SIZE_320x240: @@ -3855,7 +3869,7 @@ static int ibmcam_probe(struct usb_interface *intf, const struct usb_device_id * canvasY = 120; break; default: - info("IBM NetCamera: using 176x144"); + dev_info(&uvd->dev->dev, "IBM NetCamera: using 176x144\n"); size = SIZE_176x144; /* No break here */ case SIZE_176x144: diff --git a/drivers/media/video/usbvideo/konicawc.c b/drivers/media/video/usbvideo/konicawc.c index 1c18028..e986c28 100644 --- a/drivers/media/video/usbvideo/konicawc.c +++ b/drivers/media/video/usbvideo/konicawc.c @@ -337,7 +337,8 @@ static int konicawc_compress_iso(struct uvd *uvd, struct urb *dataurb, struct ur } if((sts > 0x01) && (sts < 0x80)) { - info("unknown status %2.2x", sts); + dev_info(&uvd->dev->dev, "unknown status %2.2x\n", + sts); bad++; continue; } @@ -568,8 +569,12 @@ static void konicawc_process_isoc(struct uvd *uvd, struct usbvideo_frame *frame) fdrops = (0x80 + curframe - cam->lastframe) & 0x7F; fdrops--; if(fdrops) { - info("Dropped %d frames (%d -> %d)", fdrops, - cam->lastframe, curframe); + dev_info(&uvd->dev->dev, + "Dropped %d frames " + "(%d -> %d)\n", + fdrops, + cam->lastframe, + curframe); } } cam->lastframe = curframe; @@ -784,7 +789,8 @@ static int konicawc_probe(struct usb_interface *intf, const struct usb_device_id if (dev->descriptor.bNumConfigurations != 1) return -ENODEV; - info("Konica Webcam (rev. 0x%04x)", le16_to_cpu(dev->descriptor.bcdDevice)); + dev_info(&intf->dev, "Konica Webcam (rev. 0x%04x)\n", + le16_to_cpu(dev->descriptor.bcdDevice)); RESTRICT_TO_RANGE(speed, 0, MAX_SPEED); /* Validate found interface: must have one ISO endpoint */ @@ -925,7 +931,8 @@ static struct usb_device_id id_table[] = { static int __init konicawc_init(void) { struct usbvideo_cb cbTbl; - info(DRIVER_DESC " " DRIVER_VERSION); + printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":" + DRIVER_DESC "\n"); memset(&cbTbl, 0, sizeof(cbTbl)); cbTbl.probe = konicawc_probe; cbTbl.setupOnOpen = konicawc_setup_on_open; diff --git a/drivers/media/video/usbvideo/quickcam_messenger.c b/drivers/media/video/usbvideo/quickcam_messenger.c index 3d26a30..05c61b5 100644 --- a/drivers/media/video/usbvideo/quickcam_messenger.c +++ b/drivers/media/video/usbvideo/quickcam_messenger.c @@ -1080,7 +1080,8 @@ static struct usbvideo_cb qcm_driver = { static int __init qcm_init(void) { - info(DRIVER_DESC " " DRIVER_VERSION); + printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":" + DRIVER_DESC "\n"); return usbvideo_register( &cams, diff --git a/drivers/media/video/usbvideo/ultracam.c b/drivers/media/video/usbvideo/ultracam.c index 9544e64..9714baa 100644 --- a/drivers/media/video/usbvideo/ultracam.c +++ b/drivers/media/video/usbvideo/ultracam.c @@ -156,10 +156,11 @@ static int ultracam_veio( sizeof(cp), 1000); #if 1 - info("USB => %02x%02x%02x%02x%02x%02x%02x%02x " - "(req=$%02x val=$%04x ind=$%04x)", - cp[0],cp[1],cp[2],cp[3],cp[4],cp[5],cp[6],cp[7], - req, value, index); + dev_info(&uvd->dev->dev, + "USB => %02x%02x%02x%02x%02x%02x%02x%02x " + "(req=$%02x val=$%04x ind=$%04x)\n", + cp[0],cp[1],cp[2],cp[3],cp[4],cp[5],cp[6],cp[7], + req, value, index); #endif } else { i = usb_control_msg( @@ -517,19 +518,20 @@ static int ultracam_probe(struct usb_interface *intf, const struct usb_device_id unsigned char video_ep = 0; if (debug >= 1) - info("ultracam_probe(%p)", intf); + dev_info(&intf->dev, "ultracam_probe\n"); /* We don't handle multi-config cameras */ if (dev->descriptor.bNumConfigurations != 1) return -ENODEV; - info("IBM Ultra camera found (rev. 0x%04x)", - le16_to_cpu(dev->descriptor.bcdDevice)); + dev_info(&intf->dev, "IBM Ultra camera found (rev. 0x%04x)\n", + le16_to_cpu(dev->descriptor.bcdDevice)); /* Validate found interface: must have one ISO endpoint */ nas = intf->num_altsetting; if (debug > 0) - info("Number of alternate settings=%d.", nas); + dev_info(&intf->dev, "Number of alternate settings=%d.\n", + nas); if (nas < 8) { err("Too few alternate settings for this camera!"); return -ENODEV; @@ -576,7 +578,9 @@ static int ultracam_probe(struct usb_interface *intf, const struct usb_device_id actInterface = i; maxPS = le16_to_cpu(endpoint->wMaxPacketSize); if (debug > 0) - info("Active setting=%d. maxPS=%d.", i, maxPS); + dev_info(&intf->dev, + "Active setting=%d. " + "maxPS=%d.\n", i, maxPS); } else { /* Got another active alt. setting */ if (maxPS < le16_to_cpu(endpoint->wMaxPacketSize)) { @@ -584,8 +588,11 @@ static int ultracam_probe(struct usb_interface *intf, const struct usb_device_id actInterface = i; maxPS = le16_to_cpu(endpoint->wMaxPacketSize); if (debug > 0) { - info("Even better ctive setting=%d. maxPS=%d.", - i, maxPS); + dev_info(&intf->dev, + "Even better ctive " + "setting=%d. " + "maxPS=%d.\n", + i, maxPS); } } } diff --git a/drivers/media/video/usbvideo/usbvideo.c b/drivers/media/video/usbvideo/usbvideo.c index 9569e8c..07cd87d 100644 --- a/drivers/media/video/usbvideo/usbvideo.c +++ b/drivers/media/video/usbvideo/usbvideo.c @@ -468,8 +468,9 @@ static void usbvideo_ReportStatistics(const struct uvd *uvd) percent = (100 * goodPackets) / allPackets; else percent = goodPackets / (allPackets / 100); - info("Packet Statistics: Total=%lu. Empty=%lu. Usage=%lu%%", - allPackets, badPackets, percent); + dev_info(&uvd->dev->dev, + "Packet Statistics: Total=%lu. Empty=%lu. Usage=%lu%%\n", + allPackets, badPackets, percent); if (uvd->iso_packet_len > 0) { unsigned long allBytes, xferBytes; char multiplier = ' '; @@ -497,8 +498,9 @@ static void usbvideo_ReportStatistics(const struct uvd *uvd) } } } - info("Transfer Statistics: Transferred=%lu%cB Usage=%lu%%", - xferBytes, multiplier, percent); + dev_info(&uvd->dev->dev, + "Transfer Statistics: Transferred=%lu%cB Usage=%lu%%\n", + xferBytes, multiplier, percent); } } } @@ -545,7 +547,7 @@ void usbvideo_TestPattern(struct uvd *uvd, int fullframe, int pmode) { /* For debugging purposes only */ char tmp[20]; usbvideo_VideosizeToString(tmp, sizeof(tmp), frame->request); - info("testpattern: frame=%s", tmp); + dev_info(&uvd->dev->dev, "testpattern: frame=%s\n", tmp); } #endif /* Form every scan line */ @@ -854,7 +856,7 @@ static void usbvideo_Disconnect(struct usb_interface *intf) usbvideo_ClientIncModCount(uvd); if (uvd->debug > 0) - info("%s(%p.)", __func__, intf); + dev_info(&intf->dev, "%s(%p.)\n", __func__, intf); mutex_lock(&uvd->lock); uvd->remove_pending = 1; /* Now all ISO data will be ignored */ @@ -870,14 +872,15 @@ static void usbvideo_Disconnect(struct usb_interface *intf) video_unregister_device(&uvd->vdev); if (uvd->debug > 0) - info("%s: Video unregistered.", __func__); + dev_info(&intf->dev, "%s: Video unregistered.\n", __func__); if (uvd->user) - info("%s: In use, disconnect pending.", __func__); + dev_info(&intf->dev, "%s: In use, disconnect pending.\n", + __func__); else usbvideo_CameraRelease(uvd); mutex_unlock(&uvd->lock); - info("USB camera disconnected."); + dev_info(&intf->dev, "USB camera disconnected.\n"); usbvideo_ClientDecModCount(uvd); } @@ -1015,14 +1018,17 @@ int usbvideo_RegisterVideoDevice(struct uvd *uvd) return -EINVAL; } if (uvd->video_endp == 0) { - info("%s: No video endpoint specified; data pump disabled.", __func__); + dev_info(&uvd->dev->dev, + "%s: No video endpoint specified; data pump disabled.\n", + __func__); } if (uvd->paletteBits == 0) { err("%s: No palettes specified!", __func__); return -EINVAL; } if (uvd->defaultPalette == 0) { - info("%s: No default palette!", __func__); + dev_info(&uvd->dev->dev, "%s: No default palette!\n", + __func__); } uvd->max_frame_size = VIDEOSIZE_X(uvd->canvas) * @@ -1031,8 +1037,10 @@ int usbvideo_RegisterVideoDevice(struct uvd *uvd) usbvideo_VideosizeToString(tmp2, sizeof(tmp2), uvd->canvas); if (uvd->debug > 0) { - info("%s: iface=%d. endpoint=$%02x paletteBits=$%08lx", - __func__, uvd->iface, uvd->video_endp, uvd->paletteBits); + dev_info(&uvd->dev->dev, + "%s: iface=%d. endpoint=$%02x paletteBits=$%08lx\n", + __func__, uvd->iface, uvd->video_endp, + uvd->paletteBits); } if (uvd->dev == NULL) { err("%s: uvd->dev == NULL", __func__); @@ -1045,12 +1053,13 @@ int usbvideo_RegisterVideoDevice(struct uvd *uvd) return -EPIPE; } if (uvd->debug > 1) { - info("%s: video_register_device() successful", __func__); + dev_info(&uvd->dev->dev, + "%s: video_register_device() successful\n", __func__); } - info("%s on /dev/video%d: canvas=%s videosize=%s", - (uvd->handle != NULL) ? uvd->handle->drvName : "???", - uvd->vdev.minor, tmp2, tmp1); + dev_info(&uvd->dev->dev, "%s on /dev/video%d: canvas=%s videosize=%s\n", + (uvd->handle != NULL) ? uvd->handle->drvName : "???", + uvd->vdev.minor, tmp2, tmp1); usb_get_dev(uvd->dev); return 0; @@ -1112,7 +1121,7 @@ static int usbvideo_v4l_open(struct inode *inode, struct file *file) int i, errCode = 0; if (uvd->debug > 1) - info("%s($%p)", __func__, dev); + dev_info(&uvd->dev->dev, "%s($%p)\n", __func__, dev); if (0 < usbvideo_ClientIncModCount(uvd)) return -ENODEV; @@ -1179,19 +1188,25 @@ static int usbvideo_v4l_open(struct inode *inode, struct file *file) if (errCode == 0) { if (VALID_CALLBACK(uvd, setupOnOpen)) { if (uvd->debug > 1) - info("%s: setupOnOpen callback", __func__); + dev_info(&uvd->dev->dev, + "%s: setupOnOpen callback\n", + __func__); errCode = GET_CALLBACK(uvd, setupOnOpen)(uvd); if (errCode < 0) { err("%s: setupOnOpen callback failed (%d.).", __func__, errCode); } else if (uvd->debug > 1) { - info("%s: setupOnOpen callback successful", __func__); + dev_info(&uvd->dev->dev, + "%s: setupOnOpen callback successful\n", + __func__); } } if (errCode == 0) { uvd->settingsAdjusted = 0; if (uvd->debug > 1) - info("%s: Open succeeded.", __func__); + dev_info(&uvd->dev->dev, + "%s: Open succeeded.\n", + __func__); uvd->user++; file->private_data = uvd; } @@ -1201,7 +1216,8 @@ static int usbvideo_v4l_open(struct inode *inode, struct file *file) if (errCode != 0) usbvideo_ClientDecModCount(uvd); if (uvd->debug > 0) - info("%s: Returning %d.", __func__, errCode); + dev_info(&uvd->dev->dev, "%s: Returning %d.\n", __func__, + errCode); return errCode; } @@ -1224,7 +1240,7 @@ static int usbvideo_v4l_close(struct inode *inode, struct file *file) int i; if (uvd->debug > 1) - info("%s($%p)", __func__, dev); + dev_info(&uvd->dev->dev, "%s($%p)\n", __func__, dev); mutex_lock(&uvd->lock); GET_CALLBACK(uvd, stopDataPump)(uvd); @@ -1244,14 +1260,15 @@ static int usbvideo_v4l_close(struct inode *inode, struct file *file) uvd->user--; if (uvd->remove_pending) { if (uvd->debug > 0) - info("usbvideo_v4l_close: Final disconnect."); + dev_info(&uvd->dev->dev, "%s: Final disconnect.\n", + __func__); usbvideo_CameraRelease(uvd); } mutex_unlock(&uvd->lock); usbvideo_ClientDecModCount(uvd); if (uvd->debug > 1) - info("%s: Completed.", __func__); + dev_info(&uvd->dev->dev, "%s: Completed.\n", __func__); file->private_data = NULL; return 0; } @@ -1365,8 +1382,9 @@ static int usbvideo_v4l_do_ioctl(struct inode *inode, struct file *file, struct video_mmap *vm = arg; if (uvd->debug >= 1) { - info("VIDIOCMCAPTURE: frame=%d. size=%dx%d, format=%d.", - vm->frame, vm->width, vm->height, vm->format); + dev_info(&uvd->dev->dev, + "VIDIOCMCAPTURE: frame=%d. size=%dx%d, format=%d.\n", + vm->frame, vm->width, vm->height, vm->format); } /* * Check if the requested size is supported. If the requestor @@ -1384,18 +1402,24 @@ static int usbvideo_v4l_do_ioctl(struct inode *inode, struct file *file, if ((vm->width > VIDEOSIZE_X(uvd->canvas)) || (vm->height > VIDEOSIZE_Y(uvd->canvas))) { if (uvd->debug > 0) { - info("VIDIOCMCAPTURE: Size=%dx%d too large; " - "allowed only up to %ldx%ld", vm->width, vm->height, - VIDEOSIZE_X(uvd->canvas), VIDEOSIZE_Y(uvd->canvas)); + dev_info(&uvd->dev->dev, + "VIDIOCMCAPTURE: Size=%dx%d " + "too large; allowed only up " + "to %ldx%ld\n", vm->width, + vm->height, + VIDEOSIZE_X(uvd->canvas), + VIDEOSIZE_Y(uvd->canvas)); } return -EINVAL; } /* Check if the palette is supported */ if (((1L << vm->format) & uvd->paletteBits) == 0) { if (uvd->debug > 0) { - info("VIDIOCMCAPTURE: format=%d. not supported" - " (paletteBits=$%08lx)", - vm->format, uvd->paletteBits); + dev_info(&uvd->dev->dev, + "VIDIOCMCAPTURE: format=%d. " + "not supported " + "(paletteBits=$%08lx)\n", + vm->format, uvd->paletteBits); } return -EINVAL; } @@ -1423,7 +1447,9 @@ static int usbvideo_v4l_do_ioctl(struct inode *inode, struct file *file, return -EINVAL; if (uvd->debug >= 1) - info("VIDIOCSYNC: syncing to frame %d.", *frameNum); + dev_info(&uvd->dev->dev, + "VIDIOCSYNC: syncing to frame %d.\n", + *frameNum); if (uvd->flags & FLAGS_NO_DECODING) ret = usbvideo_GetFrame(uvd, *frameNum); else if (VALID_CALLBACK(uvd, getFrame)) { @@ -1505,7 +1531,9 @@ static ssize_t usbvideo_v4l_read(struct file *file, char __user *buf, return -EFAULT; if (uvd->debug >= 1) - info("%s: %Zd. bytes, noblock=%d.", __func__, count, noblock); + dev_info(&uvd->dev->dev, + "%s: %Zd. bytes, noblock=%d.\n", + __func__, count, noblock); mutex_lock(&uvd->lock); @@ -1686,18 +1714,21 @@ static void usbvideo_IsocIrq(struct urb *urb) return; #if 0 if (urb->actual_length > 0) { - info("urb=$%p status=%d. errcount=%d. length=%d.", - urb, urb->status, urb->error_count, urb->actual_length); + dev_info(&uvd->dev->dev, + "urb=$%p status=%d. errcount=%d. length=%d.\n", + urb, urb->status, urb->error_count, + urb->actual_length); } else { static int c = 0; if (c++ % 100 == 0) - info("No Isoc data"); + dev_info(&uvd->dev->dev, "No Isoc data\n"); } #endif if (!uvd->streaming) { if (uvd->debug >= 1) - info("Not streaming, but interrupt!"); + dev_info(&uvd->dev->dev, + "Not streaming, but interrupt!\n"); return; } @@ -1742,7 +1773,7 @@ static int usbvideo_StartDataPump(struct uvd *uvd) int i, errFlag; if (uvd->debug > 1) - info("%s($%p)", __func__, uvd); + dev_info(&uvd->dev->dev, "%s($%p)\n", __func__, uvd); if (!CAMERA_IS_OPERATIONAL(uvd)) { err("%s: Camera is not operational", __func__); @@ -1790,7 +1821,9 @@ static int usbvideo_StartDataPump(struct uvd *uvd) uvd->streaming = 1; if (uvd->debug > 1) - info("%s: streaming=1 video_endp=$%02x", __func__, uvd->video_endp); + dev_info(&uvd->dev->dev, + "%s: streaming=1 video_endp=$%02x\n", __func__, + uvd->video_endp); return 0; } @@ -1812,14 +1845,14 @@ static void usbvideo_StopDataPump(struct uvd *uvd) return; if (uvd->debug > 1) - info("%s($%p)", __func__, uvd); + dev_info(&uvd->dev->dev, "%s($%p)\n", __func__, uvd); /* Unschedule all of the iso td's */ for (i=0; i < USBVIDEO_NUMSBUF; i++) { usb_kill_urb(uvd->sbuf[i].urb); } if (uvd->debug > 1) - info("%s: streaming=0", __func__); + dev_info(&uvd->dev->dev, "%s: streaming=0\n", __func__); uvd->streaming = 0; if (!uvd->remove_pending) { @@ -1851,7 +1884,8 @@ static int usbvideo_NewFrame(struct uvd *uvd, int framenum) int n; if (uvd->debug > 1) - info("usbvideo_NewFrame($%p,%d.)", uvd, framenum); + dev_info(&uvd->dev->dev, "usbvideo_NewFrame($%p,%d.)\n", uvd, + framenum); /* If we're not grabbing a frame right now and the other frame is */ /* ready to be grabbed into, then use it instead */ @@ -1956,12 +1990,14 @@ static int usbvideo_GetFrame(struct uvd *uvd, int frameNum) struct usbvideo_frame *frame = &uvd->frame[frameNum]; if (uvd->debug >= 2) - info("%s($%p,%d.)", __func__, uvd, frameNum); + dev_info(&uvd->dev->dev, "%s($%p,%d.)\n", __func__, uvd, + frameNum); switch (frame->frameState) { case FrameState_Unused: if (uvd->debug >= 2) - info("%s: FrameState_Unused", __func__); + dev_info(&uvd->dev->dev, "%s: FrameState_Unused\n", + __func__); return -EINVAL; case FrameState_Ready: case FrameState_Grabbing: @@ -1971,7 +2007,9 @@ static int usbvideo_GetFrame(struct uvd *uvd, int frameNum) redo: if (!CAMERA_IS_OPERATIONAL(uvd)) { if (uvd->debug >= 2) - info("%s: Camera is not operational (1)", __func__); + dev_info(&uvd->dev->dev, + "%s: Camera is not operational (1)\n", + __func__); return -EIO; } ntries = 0; @@ -1980,24 +2018,33 @@ static int usbvideo_GetFrame(struct uvd *uvd, int frameNum) signalPending = signal_pending(current); if (!CAMERA_IS_OPERATIONAL(uvd)) { if (uvd->debug >= 2) - info("%s: Camera is not operational (2)", __func__); + dev_info(&uvd->dev->dev, + "%s: Camera is not " + "operational (2)\n", __func__); return -EIO; } assert(uvd->fbuf != NULL); if (signalPending) { if (uvd->debug >= 2) - info("%s: Signal=$%08x", __func__, signalPending); + dev_info(&uvd->dev->dev, + "%s: Signal=$%08x\n", __func__, + signalPending); if (uvd->flags & FLAGS_RETRY_VIDIOCSYNC) { usbvideo_TestPattern(uvd, 1, 0); uvd->curframe = -1; uvd->stats.frame_num++; if (uvd->debug >= 2) - info("%s: Forced test pattern screen", __func__); + dev_info(&uvd->dev->dev, + "%s: Forced test " + "pattern screen\n", + __func__); return 0; } else { /* Standard answer: Interrupted! */ if (uvd->debug >= 2) - info("%s: Interrupted!", __func__); + dev_info(&uvd->dev->dev, + "%s: Interrupted!\n", + __func__); return -EINTR; } } else { @@ -2011,8 +2058,10 @@ static int usbvideo_GetFrame(struct uvd *uvd, int frameNum) } } while (frame->frameState == FrameState_Grabbing); if (uvd->debug >= 2) { - info("%s: Grabbing done; state=%d. (%lu. bytes)", - __func__, frame->frameState, frame->seqRead_Length); + dev_info(&uvd->dev->dev, + "%s: Grabbing done; state=%d. (%lu. bytes)\n", + __func__, frame->frameState, + frame->seqRead_Length); } if (frame->frameState == FrameState_Error) { int ret = usbvideo_NewFrame(uvd, frameNum); @@ -2049,7 +2098,9 @@ static int usbvideo_GetFrame(struct uvd *uvd, int frameNum) } frame->frameState = FrameState_Done_Hold; if (uvd->debug >= 2) - info("%s: Entered FrameState_Done_Hold state.", __func__); + dev_info(&uvd->dev->dev, + "%s: Entered FrameState_Done_Hold state.\n", + __func__); return 0; case FrameState_Done_Hold: @@ -2060,7 +2111,9 @@ static int usbvideo_GetFrame(struct uvd *uvd, int frameNum) * it will be released back into the wild to roam freely. */ if (uvd->debug >= 2) - info("%s: FrameState_Done_Hold state.", __func__); + dev_info(&uvd->dev->dev, + "%s: FrameState_Done_Hold state.\n", + __func__); return 0; } diff --git a/drivers/media/video/usbvision/usbvision-core.c b/drivers/media/video/usbvision/usbvision-core.c index c317ed7..b26b563 100644 --- a/drivers/media/video/usbvision/usbvision-core.c +++ b/drivers/media/video/usbvision/usbvision-core.c @@ -84,7 +84,8 @@ MODULE_PARM_DESC(adjust_Y_Offset, "adjust Y offset display [core]"); #ifdef USBVISION_DEBUG #define PDEBUG(level, fmt, args...) { \ if (core_debug & (level)) \ - info("[%s:%d] " fmt, __func__, __LINE__ , ## args); \ + printk(KERN_INFO KBUILD_MODNAME ":[%s:%d] " fmt, \ + __func__, __LINE__ , ## args); \ } #else #define PDEBUG(level, fmt, args...) do {} while(0) diff --git a/drivers/media/video/usbvision/usbvision-i2c.c b/drivers/media/video/usbvision/usbvision-i2c.c index a6d0085..92427fd 100644 --- a/drivers/media/video/usbvision/usbvision-i2c.c +++ b/drivers/media/video/usbvision/usbvision-i2c.c @@ -47,7 +47,8 @@ MODULE_PARM_DESC(i2c_debug, "enable debug messages [i2c]"); #define PDEBUG(level, fmt, args...) { \ if (i2c_debug & (level)) \ - info("[%s:%d] " fmt, __func__, __LINE__ , ## args); \ + printk(KERN_INFO KBUILD_MODNAME ":[%s:%d] " fmt, \ + __func__, __LINE__ , ## args); \ } static int usbvision_i2c_write(struct usb_usbvision *usbvision, unsigned char addr, char *buf, diff --git a/drivers/media/video/usbvision/usbvision-video.c b/drivers/media/video/usbvision/usbvision-video.c index 782ee64..e10b256 100644 --- a/drivers/media/video/usbvision/usbvision-video.c +++ b/drivers/media/video/usbvision/usbvision-video.c @@ -98,7 +98,8 @@ USBVISION_DRIVER_VERSION_PATCHLEVEL) #ifdef USBVISION_DEBUG #define PDEBUG(level, fmt, args...) { \ if (video_debug & (level)) \ - info("[%s:%d] " fmt, __func__, __LINE__ , ## args); \ + printk(KERN_INFO KBUILD_MODNAME ":[%s:%d] " fmt, \ + __func__, __LINE__ , ## args); \ } #else #define PDEBUG(level, fmt, args...) do {} while(0) diff --git a/drivers/media/video/zr364xx.c b/drivers/media/video/zr364xx.c index 93991cb..7cdac99 100644 --- a/drivers/media/video/zr364xx.c +++ b/drivers/media/video/zr364xx.c @@ -52,7 +52,7 @@ /* Debug macro */ -#define DBG(x...) if (debug) info(x) +#define DBG(x...) if (debug) printk(KERN_INFO KBUILD_MODNAME x) /* Init methods, need to find nicer names for these @@ -128,7 +128,7 @@ static int send_control_msg(struct usb_device *udev, u8 request, u16 value, unsigned char *transfer_buffer = kmalloc(size, GFP_KERNEL); if (!transfer_buffer) { - info("kmalloc(%d) failed", size); + dev_err(&udev->dev, "kmalloc(%d) failed\n", size); return -ENOMEM; } @@ -144,7 +144,8 @@ static int send_control_msg(struct usb_device *udev, u8 request, u16 value, kfree(transfer_buffer); if (status < 0) - info("Failed sending control message, error %d.", status); + dev_err(&udev->dev, + "Failed sending control message, error %d.\n", status); return status; } @@ -304,11 +305,11 @@ static int read_frame(struct zr364xx_camera *cam, int framenum) DBG("buffer : %d %d", cam->buffer[0], cam->buffer[1]); DBG("bulk : n=%d size=%d", n, actual_length); if (n < 0) { - info("error reading bulk msg"); + dev_err(&cam->udev->dev, "error reading bulk msg\n"); return 0; } if (actual_length < 0 || actual_length > BUFFER_SIZE) { - info("wrong number of bytes"); + dev_err(&cam->udev->dev, "wrong number of bytes\n"); return 0; } @@ -652,7 +653,7 @@ static int zr364xx_open(struct inode *inode, struct file *file) if (!cam->framebuf) { cam->framebuf = vmalloc_32(MAX_FRAME_SIZE * FRAMES); if (!cam->framebuf) { - info("vmalloc_32 failed!"); + dev_err(&cam->udev->dev, "vmalloc_32 failed!\n"); err = -ENOMEM; goto out; } @@ -664,7 +665,8 @@ static int zr364xx_open(struct inode *inode, struct file *file) 0, init[cam->method][i].bytes, init[cam->method][i].size); if (err < 0) { - info("error during open sequence: %d", i); + dev_err(&cam->udev->dev, + "error during open sequence: %d\n", i); goto out; } } @@ -712,7 +714,7 @@ static int zr364xx_release(struct inode *inode, struct file *file) 0, init[i][cam->method].bytes, init[cam->method][i].size); if (err < 0) { - info("error during release sequence"); + dev_err(&udev->dev, "error during release sequence\n"); goto out; } } @@ -808,13 +810,14 @@ static int zr364xx_probe(struct usb_interface *intf, DBG("probing..."); - info(DRIVER_DESC " compatible webcam plugged"); - info("model %04x:%04x detected", udev->descriptor.idVendor, - udev->descriptor.idProduct); + dev_info(&intf->dev, DRIVER_DESC " compatible webcam plugged\n"); + dev_info(&intf->dev, "model %04x:%04x detected\n", + le16_to_cpu(udev->descriptor.idVendor), + le16_to_cpu(udev->descriptor.idProduct)); cam = kzalloc(sizeof(struct zr364xx_camera), GFP_KERNEL); if (cam == NULL) { - info("cam: out of memory !"); + dev_err(&udev->dev, "cam: out of memory !\n"); return -ENOMEM; } /* save the init method used by this camera */ @@ -822,7 +825,7 @@ static int zr364xx_probe(struct usb_interface *intf, cam->vdev = video_device_alloc(); if (cam->vdev == NULL) { - info("cam->vdev: out of memory !"); + dev_err(&udev->dev, "cam->vdev: out of memory !\n"); kfree(cam); return -ENOMEM; } @@ -834,7 +837,7 @@ static int zr364xx_probe(struct usb_interface *intf, cam->udev = udev; if ((cam->buffer = kmalloc(BUFFER_SIZE, GFP_KERNEL)) == NULL) { - info("cam->buffer: out of memory !"); + dev_info(&udev->dev, "cam->buffer: out of memory !\n"); video_device_release(cam->vdev); kfree(cam); return -ENODEV; @@ -842,17 +845,17 @@ static int zr364xx_probe(struct usb_interface *intf, switch (mode) { case 1: - info("160x120 mode selected"); + dev_info(&udev->dev, "160x120 mode selected\n"); cam->width = 160; cam->height = 120; break; case 2: - info("640x480 mode selected"); + dev_info(&udev->dev, "640x480 mode selected\n"); cam->width = 640; cam->height = 480; break; default: - info("320x240 mode selected"); + dev_info(&udev->dev, "320x240 mode selected\n"); cam->width = 320; cam->height = 240; break; @@ -872,7 +875,7 @@ static int zr364xx_probe(struct usb_interface *intf, err = video_register_device(cam->vdev, VFL_TYPE_GRABBER, -1); if (err) { - info("video_register_device failed"); + dev_err(&udev->dev, "video_register_device failed\n"); video_device_release(cam->vdev); kfree(cam->buffer); kfree(cam); @@ -881,7 +884,8 @@ static int zr364xx_probe(struct usb_interface *intf, usb_set_intfdata(intf, cam); - info(DRIVER_DESC " controlling video device %d", cam->vdev->minor); + dev_info(&udev->dev, DRIVER_DESC " controlling video device %d\n", + cam->vdev->minor); return 0; } @@ -891,7 +895,7 @@ static void zr364xx_disconnect(struct usb_interface *intf) struct zr364xx_camera *cam = usb_get_intfdata(intf); usb_set_intfdata(intf, NULL); dev_set_drvdata(&intf->dev, NULL); - info(DRIVER_DESC " webcam unplugged"); + dev_info(&intf->dev, DRIVER_DESC " webcam unplugged\n"); if (cam->vdev) video_unregister_device(cam->vdev); cam->vdev = NULL; @@ -920,16 +924,16 @@ static int __init zr364xx_init(void) int retval; retval = usb_register(&zr364xx_driver); if (retval) - info("usb_register failed!"); + printk(KERN_ERR KBUILD_MODNAME ": usb_register failed!\n"); else - info(DRIVER_DESC " module loaded"); + printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_DESC "\n"); return retval; } static void __exit zr364xx_exit(void) { - info(DRIVER_DESC " module unloaded"); + printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_DESC " module unloaded\n"); usb_deregister(&zr364xx_driver); } -- cgit v0.10.2 From 79a9098ae47119fad54a3443e358f08e30b7d3a5 Mon Sep 17 00:00:00 2001 From: Jean-Francois Moine Date: Sun, 5 Oct 2008 04:21:24 -0300 Subject: V4L/DVB (9118): gspca: Set the vertical flip at streamon time in sonixj. Signed-off-by: Jean-Francois Moine Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/gspca/sonixj.c b/drivers/media/video/gspca/sonixj.c index 93b1734..53cb82d 100644 --- a/drivers/media/video/gspca/sonixj.c +++ b/drivers/media/video/gspca/sonixj.c @@ -1350,6 +1350,9 @@ static int sd_start(struct gspca_dev *gspca_dev) setbrightness(gspca_dev); setcontrast(gspca_dev); break; + case SENSOR_OV7630: + setvflip(sd); + /* fall thru */ default: /* OV76xx */ setbrightcont(gspca_dev); break; @@ -1582,7 +1585,8 @@ static int sd_setvflip(struct gspca_dev *gspca_dev, __s32 val) struct sd *sd = (struct sd *) gspca_dev; sd->vflip = val; - setvflip(sd); + if (gspca_dev->streaming) + setvflip(sd); return 0; } -- cgit v0.10.2 From 3145b8c1bfb96b02abf63dcd83ec7517c22cb574 Mon Sep 17 00:00:00 2001 From: Jean-Francois Moine Date: Sun, 5 Oct 2008 04:22:10 -0300 Subject: V4L/DVB (9119): gspca: Don't destroy the URBs on disconnect. Signed-off-by: Jean-Francois Moine Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/gspca/gspca.c b/drivers/media/video/gspca/gspca.c index 9db3d89..c21af31 100644 --- a/drivers/media/video/gspca/gspca.c +++ b/drivers/media/video/gspca/gspca.c @@ -1903,17 +1903,12 @@ void gspca_disconnect(struct usb_interface *intf) usb_set_intfdata(intf, NULL); - gspca_dev->present = 0; - mutex_lock(&gspca_dev->queue_lock); - mutex_lock(&gspca_dev->usb_lock); - gspca_dev->streaming = 0; - destroy_urbs(gspca_dev); - mutex_unlock(&gspca_dev->usb_lock); - mutex_unlock(&gspca_dev->queue_lock); - /* We don't want people trying to open up the device */ video_unregister_device(&gspca_dev->vdev); + gspca_dev->present = 0; + gspca_dev->streaming = 0; + kref_put(&gspca_dev->kref, gspca_delete); PDEBUG(D_PROBE, "disconnect complete"); -- cgit v0.10.2 From e66c6419231cd61a1be04ef84bc6264556289e7d Mon Sep 17 00:00:00 2001 From: Jean-Francois Moine Date: Sun, 5 Oct 2008 04:46:11 -0300 Subject: V4L/DVB (9120): gspca: sd_desc->start returns a value and static functions in m5602. Signed-off-by: Jean-Francois Moine Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/gspca/m5602/m5602_bridge.h b/drivers/media/video/gspca/m5602/m5602_bridge.h index 18ca19a..c786d7d 100644 --- a/drivers/media/video/gspca/m5602/m5602_bridge.h +++ b/drivers/media/video/gspca/m5602/m5602_bridge.h @@ -167,16 +167,4 @@ int m5602_read_bridge( int m5602_write_bridge( struct sd *sd, u8 address, u8 i2c_data); -int m5602_configure(struct gspca_dev *gspca_dev, - const struct usb_device_id *id); - -int m5602_init(struct gspca_dev *gspca_dev); - -void m5602_start_transfer(struct gspca_dev *gspca_dev); - -void m5602_stop_transfer(struct gspca_dev *gspca_dev); - -void m5602_urb_complete(struct gspca_dev *gspca_dev, struct gspca_frame *frame, - __u8 *data, int len); - #endif diff --git a/drivers/media/video/gspca/m5602/m5602_core.c b/drivers/media/video/gspca/m5602/m5602_core.c index 4750735..19d5e35 100644 --- a/drivers/media/video/gspca/m5602/m5602_core.c +++ b/drivers/media/video/gspca/m5602/m5602_core.c @@ -35,16 +35,6 @@ static const __devinitdata struct usb_device_id m5602_table[] = { MODULE_DEVICE_TABLE(usb, m5602_table); -/* sub-driver description, the ctrl and nctrl is filled at probe time */ -static struct sd_desc sd_desc = { - .name = MODULE_NAME, - .config = m5602_configure, - .init = m5602_init, - .start = m5602_start_transfer, - .stopN = m5602_stop_transfer, - .pkt_scan = m5602_urb_complete -}; - /* Reads a byte from the m5602 */ int m5602_read_bridge(struct sd *sd, u8 address, u8 *i2c_data) { @@ -104,7 +94,7 @@ static void m5602_dump_bridge(struct sd *sd) info("Warning: The camera probably won't work until it's power cycled"); } -int m5602_probe_sensor(struct sd *sd) +static int m5602_probe_sensor(struct sd *sd) { /* Try the po1030 */ sd->sensor = &po1030; @@ -137,7 +127,10 @@ int m5602_probe_sensor(struct sd *sd) return -ENODEV; } -int m5602_init(struct gspca_dev *gspca_dev) +static int m5602_configure(struct gspca_dev *gspca_dev, + const struct usb_device_id *id); + +static int m5602_init(struct gspca_dev *gspca_dev) { struct sd *sd = (struct sd *) gspca_dev; int err; @@ -149,7 +142,7 @@ int m5602_init(struct gspca_dev *gspca_dev) return err; } -void m5602_start_transfer(struct gspca_dev *gspca_dev) +static int m5602_start_transfer(struct gspca_dev *gspca_dev) { struct sd *sd = (struct sd *) gspca_dev; __u8 *buf = sd->gspca_dev.usb_buf; @@ -162,9 +155,11 @@ void m5602_start_transfer(struct gspca_dev *gspca_dev) 4, M5602_URB_MSG_TIMEOUT); PDEBUG(DBG_V4L2, "Transfer started"); + return 0; } -void m5602_urb_complete(struct gspca_dev *gspca_dev, struct gspca_frame *frame, +static void m5602_urb_complete(struct gspca_dev *gspca_dev, + struct gspca_frame *frame, __u8 *data, int len) { struct sd *sd = (struct sd *) gspca_dev; @@ -216,13 +211,23 @@ void m5602_urb_complete(struct gspca_dev *gspca_dev, struct gspca_frame *frame, } } -void m5602_stop_transfer(struct gspca_dev *gspca_dev) +static void m5602_stop_transfer(struct gspca_dev *gspca_dev) { /* Is there are a command to stop a data transfer? */ } +/* sub-driver description, the ctrl and nctrl is filled at probe time */ +static struct sd_desc sd_desc = { + .name = MODULE_NAME, + .config = m5602_configure, + .init = m5602_init, + .start = m5602_start_transfer, + .stopN = m5602_stop_transfer, + .pkt_scan = m5602_urb_complete +}; + /* this function is called at probe time */ -int m5602_configure(struct gspca_dev *gspca_dev, +static int m5602_configure(struct gspca_dev *gspca_dev, const struct usb_device_id *id) { struct sd *sd = (struct sd *) gspca_dev; -- cgit v0.10.2 From 491831260e94475d14d5465b424df955d1f20aac Mon Sep 17 00:00:00 2001 From: Jean-Francois Moine Date: Sun, 5 Oct 2008 04:55:24 -0300 Subject: V4L/DVB (9121): gspca: Add the subdriver finepix in Kconfig and Makefile. Signed-off-by: Jean-Francois Moine Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/gspca/Kconfig b/drivers/media/video/gspca/Kconfig index aa7f3eb..f130a21 100644 --- a/drivers/media/video/gspca/Kconfig +++ b/drivers/media/video/gspca/Kconfig @@ -37,6 +37,15 @@ config USB_GSPCA_ETOMS To compile this driver as a module, choose M here: the module will be called gspca_etoms. +config USB_GSPCA_FINEPIX + tristate "Fujifilm FinePix USB V4L2 driver" + depends on VIDEO_V4L2 && USB_GSPCA + help + Say Y here if you want support for cameras based on the FinePix chip. + + To compile this driver as a module, choose M here: the + module will be called gspca_finepix. + config USB_GSPCA_MARS tristate "Mars USB Camera Driver" depends on VIDEO_V4L2 && USB_GSPCA diff --git a/drivers/media/video/gspca/Makefile b/drivers/media/video/gspca/Makefile index b87322f..22734f5 100644 --- a/drivers/media/video/gspca/Makefile +++ b/drivers/media/video/gspca/Makefile @@ -1,6 +1,7 @@ obj-$(CONFIG_USB_GSPCA) += gspca_main.o obj-$(CONFIG_USB_GSPCA_CONEX) += gspca_conex.o obj-$(CONFIG_USB_GSPCA_ETOMS) += gspca_etoms.o +obj-$(CONFIG_USB_GSPCA_FINEPIX) += gspca_finepix.o obj-$(CONFIG_USB_GSPCA_MARS) += gspca_mars.o obj-$(CONFIG_USB_GSPCA_OV519) += gspca_ov519.o obj-$(CONFIG_USB_GSPCA_PAC207) += gspca_pac207.o @@ -23,6 +24,7 @@ obj-$(CONFIG_USB_GSPCA_ZC3XX) += gspca_zc3xx.o gspca_main-objs := gspca.o gspca_conex-objs := conex.o gspca_etoms-objs := etoms.o +gspca_finepix-objs := finepix.o gspca_mars-objs := mars.o gspca_ov519-objs := ov519.o gspca_pac207-objs := pac207.o -- cgit v0.10.2 From 1abe4746ec11cff514c94fb11b3f3ac639fd200d Mon Sep 17 00:00:00 2001 From: Jean-Francois Moine Date: Mon, 6 Oct 2008 03:16:08 -0300 Subject: V4L/DVB (9122): gspca: Bad name of the sunplus subdriver in Kconfig. Signed-off-by: Jean-Francois Moine Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/gspca/Kconfig b/drivers/media/video/gspca/Kconfig index f130a21..6553018 100644 --- a/drivers/media/video/gspca/Kconfig +++ b/drivers/media/video/gspca/Kconfig @@ -163,8 +163,8 @@ config USB_GSPCA_STK014 To compile this driver as a module, choose M here: the module will be called gspca_stk014. -config USB_GSPCA_SPCA5XX - tristate "SPCA5xx USB Camera Driver" +config USB_GSPCA_SUNPLUS + tristate "SUNPLUS USB Camera Driver" depends on VIDEO_V4L2 && USB_GSPCA help Say Y here if you want support for cameras based on the Sunplus -- cgit v0.10.2 From 18f8fae19840a05a3a567e1251cf852bec5928b4 Mon Sep 17 00:00:00 2001 From: Erik Andren Date: Tue, 7 Oct 2008 03:02:59 -0300 Subject: V4L/DVB (9123): gspca: Add some lost controls to the s5k83a sensor. Signed-off-by: Erik Andren Signed-off-by: Jean-Francois Moine Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/gspca/m5602/m5602_s5k83a.c b/drivers/media/video/gspca/m5602/m5602_s5k83a.c index c1ff967..b4b33c2 100644 --- a/drivers/media/video/gspca/m5602/m5602_s5k83a.c +++ b/drivers/media/video/gspca/m5602/m5602_s5k83a.c @@ -321,7 +321,7 @@ int s5k83a_get_gain(struct gspca_dev *gspca_dev, __s32 *val) int s5k83a_set_gain(struct gspca_dev *gspca_dev, __s32 val) { - int err = 0; + int err; u8 data[2]; struct sd *sd = (struct sd *) gspca_dev; @@ -331,3 +331,93 @@ int s5k83a_set_gain(struct gspca_dev *gspca_dev, __s32 val) return (err < 0) ? err : 0; } + +int s5k83a_get_vflip(struct gspca_dev *gspca_dev, __s32 *val) +{ + int err; + u8 data[1]; + struct sd *sd = (struct sd *) gspca_dev; + + data[0] = 0x05; + err = s5k83a_write_sensor(sd, S5K83A_PAGE_MAP, data, 1); + if (err < 0) + return err; + + err = s5k83a_read_sensor(sd, S5K83A_FLIP, data, 1); + *val = (data[0] | 0x40) ? 1 : 0; + + return (err < 0) ? err : 0; +} + +int s5k83a_set_vflip(struct gspca_dev *gspca_dev, __s32 val) +{ + int err; + u8 data[1]; + struct sd *sd = (struct sd *) gspca_dev; + + data[0] = 0x05; + err = s5k83a_write_sensor(sd, S5K83A_PAGE_MAP, data, 1); + if (err < 0) + return err; + + err = s5k83a_read_sensor(sd, S5K83A_FLIP, data, 1); + if (err < 0) + return err; + + /* set or zero six bit, seven is hflip */ + data[0] = (val) ? (data[0] & 0x80) | 0x40 | S5K83A_FLIP_MASK + : (data[0] & 0x80) | S5K83A_FLIP_MASK; + err = s5k83a_write_sensor(sd, S5K83A_FLIP, data, 1); + if (err < 0) + return err; + + data[0] = (val) ? 0x0b : 0x0a; + err = s5k83a_write_sensor(sd, S5K83A_VFLIP_TUNE, data, 1); + + return (err < 0) ? err : 0; +} + +int s5k83a_get_hflip(struct gspca_dev *gspca_dev, __s32 *val) +{ + int err; + u8 data[1]; + struct sd *sd = (struct sd *) gspca_dev; + + data[0] = 0x05; + err = s5k83a_write_sensor(sd, S5K83A_PAGE_MAP, data, 1); + if (err < 0) + return err; + + err = s5k83a_read_sensor(sd, S5K83A_FLIP, data, 1); + *val = (data[0] | 0x80) ? 1 : 0; + + return (err < 0) ? err : 0; +} + +int s5k83a_set_hflip(struct gspca_dev *gspca_dev, __s32 val) +{ + int err; + u8 data[1]; + struct sd *sd = (struct sd *) gspca_dev; + + data[0] = 0x05; + err = s5k83a_write_sensor(sd, S5K83A_PAGE_MAP, data, 1); + if (err < 0) + return err; + + err = s5k83a_read_sensor(sd, S5K83A_FLIP, data, 1); + if (err < 0) + return err; + + /* set or zero seven bit, six is vflip */ + data[0] = (val) ? (data[0] & 0x40) | 0x80 | S5K83A_FLIP_MASK + : (data[0] & 0x40) | S5K83A_FLIP_MASK; + err = s5k83a_write_sensor(sd, S5K83A_FLIP, data, 1); + if (err < 0) + return err; + + data[0] = (val) ? 0x0a : 0x0b; + err = s5k83a_write_sensor(sd, S5K83A_HFLIP_TUNE, data, 1); + + return (err < 0) ? err : 0; +} diff --git a/drivers/media/video/gspca/m5602/m5602_s5k83a.h b/drivers/media/video/gspca/m5602/m5602_s5k83a.h index a57f623..833708e 100644 --- a/drivers/media/video/gspca/m5602/m5602_s5k83a.h +++ b/drivers/media/video/gspca/m5602/m5602_s5k83a.h @@ -21,15 +21,20 @@ #include "m5602_sensor.h" -#define S5K83A_PAGE_MAP 0xec -#define S5K83A_GAIN 0x18 +#define S5K83A_FLIP 0x01 +#define S5K83A_HFLIP_TUNE 0x03 +#define S5K83A_VFLIP_TUNE 0x05 #define S5K83A_WHITENESS 0x0a -#define S5K83A_BRIGHTNESS 0x1b +#define S5K83A_GAIN 0x18 +#define S5K83A_BRIGHTNESS 0x1b +#define S5K83A_PAGE_MAP 0xec #define S5K83A_DEFAULT_BRIGHTNESS 0x71 #define S5K83A_DEFAULT_WHITENESS 0x7e -#define S5K83A_DEFAULT_GAIN 0x00 -#define S5K83A_MAXIMUM_GAIN 0x3c +#define S5K83A_DEFAULT_GAIN 0x00 +#define S5K83A_MAXIMUM_GAIN 0x3c +#define S5K83A_FLIP_MASK 0x10 + /*****************************************************************************/ @@ -56,6 +61,11 @@ int s5k83a_set_whiteness(struct gspca_dev *gspca_dev, __s32 val); int s5k83a_get_whiteness(struct gspca_dev *gspca_dev, __s32 *val); int s5k83a_set_gain(struct gspca_dev *gspca_dev, __s32 val); int s5k83a_get_gain(struct gspca_dev *gspca_dev, __s32 *val); +int s5k83a_get_vflip(struct gspca_dev *gspca_dev, __s32 *val); +int s5k83a_set_vflip(struct gspca_dev *gspca_dev, __s32 val); +int s5k83a_get_hflip(struct gspca_dev *gspca_dev, __s32 *val); +int s5k83a_set_hflip(struct gspca_dev *gspca_dev, __s32 val); + static struct m5602_sensor s5k83a = { .name = "S5K83A", @@ -65,7 +75,7 @@ static struct m5602_sensor s5k83a = { .read_sensor = s5k83a_read_sensor, .write_sensor = s5k83a_write_sensor, .i2c_slave_id = 0x5a, - .nctrls = 3, + .nctrls = 5, .ctrls = { { { @@ -107,7 +117,31 @@ static struct m5602_sensor s5k83a = { }, .set = s5k83a_set_gain, .get = s5k83a_get_gain - } + }, { + { + .id = V4L2_CID_HFLIP, + .type = V4L2_CTRL_TYPE_BOOLEAN, + .name = "horizontal flip", + .minimum = 0, + .maximum = 1, + .step = 1, + .default_value = 0 + }, + .set = s5k83a_set_hflip, + .get = s5k83a_get_hflip + }, { + { + .id = V4L2_CID_VFLIP, + .type = V4L2_CTRL_TYPE_BOOLEAN, + .name = "vertical flip", + .minimum = 0, + .maximum = 1, + .step = 1, + .default_value = 0 + }, + .set = s5k83a_set_vflip, + .get = s5k83a_get_vflip + } }, .nmodes = 1, .modes = { @@ -121,7 +155,6 @@ static struct m5602_sensor s5k83a = { .bytesperline = M5602_DEFAULT_FRAME_WIDTH, .colorspace = V4L2_COLORSPACE_SRGB, .priv = 1 - } } }; @@ -438,7 +471,14 @@ static const unsigned char init_s5k83a[][4] = {SENSOR, S5K83A_WHITENESS, S5K83A_DEFAULT_WHITENESS, 0x00}, /* set default gain */ - {SENSOR_LONG, 0x18, 0x00, S5K83A_DEFAULT_GAIN} + {SENSOR_LONG, 0x18, 0x00, S5K83A_DEFAULT_GAIN}, + + /* set default flip */ + {SENSOR, S5K83A_PAGE_MAP, 0x05, 0x00}, + {SENSOR, S5K83A_FLIP, 0x00 | S5K83A_FLIP_MASK, 0x00}, + {SENSOR, S5K83A_HFLIP_TUNE, 0x0b, 0x00}, + {SENSOR, S5K83A_VFLIP_TUNE, 0x0a, 0x00} + }; #endif -- cgit v0.10.2 From a2d7807788ff3213f540ba772f6c5c39548ae09f Mon Sep 17 00:00:00 2001 From: Jean-Francois Moine Date: Tue, 7 Oct 2008 08:42:30 -0300 Subject: V4L/DVB (9124): gspca: Bad name of the tv8532 subdriver in Kconfig. Signed-off-by: Jean-Francois Moine Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/gspca/Kconfig b/drivers/media/video/gspca/Kconfig index 6553018..4d08174 100644 --- a/drivers/media/video/gspca/Kconfig +++ b/drivers/media/video/gspca/Kconfig @@ -182,7 +182,7 @@ config USB_GSPCA_T613 To compile this driver as a module, choose M here: the module will be called gspca_t613. -config USB_GSPCA_TV8531 +config USB_GSPCA_TV8532 tristate "TV8532 USB Camera Driver" depends on VIDEO_V4L2 && USB_GSPCA help -- cgit v0.10.2 From fadc79935cdb74e744c72e25f739a4acc9efabf5 Mon Sep 17 00:00:00 2001 From: Jean-Francois Moine Date: Wed, 8 Oct 2008 08:06:08 -0300 Subject: V4L/DVB (9125): gspca: Big rewrite of t613 driver - separate functions for bridge and sensor exchanges - delays added after some exchanges - other sensor type Signed-off-by: Jean-Francois Moine Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/gspca/t613.c b/drivers/media/video/gspca/t613.c index 7e435a3..b561f7c 100644 --- a/drivers/media/video/gspca/t613.c +++ b/drivers/media/video/gspca/t613.c @@ -28,8 +28,6 @@ #include "gspca.h" -#define MAX_GAMMA 0x10 /* 0 to 15 */ - #define V4L2_CID_EFFECTS (V4L2_CID_PRIVATE_BASE + 0) MODULE_AUTHOR("Leandro Costantino "); @@ -49,6 +47,10 @@ struct sd { unsigned char whitebalance; unsigned char mirror; unsigned char effect; + + __u8 sensor; +#define SENSOR_TAS5130A 0 +#define SENSOR_OTHER 1 }; /* V4L2 controls supported by the driver */ @@ -83,9 +85,9 @@ static struct ctrl sd_ctrls[] = { .type = V4L2_CTRL_TYPE_INTEGER, .name = "Brightness", .minimum = 0, - .maximum = 0x0f, + .maximum = 14, .step = 1, - .default_value = 0x09, + .default_value = 8, }, .set = sd_setbrightness, .get = sd_getbrightness, @@ -118,16 +120,17 @@ static struct ctrl sd_ctrls[] = { .set = sd_setcolors, .get = sd_getcolors, }, -#define SD_GAMMA 3 +#define GAMMA_MAX 16 +#define GAMMA_DEF 10 { { .id = V4L2_CID_GAMMA, /* (gamma on win) */ .type = V4L2_CTRL_TYPE_INTEGER, - .name = "Gamma (Untested)", + .name = "Gamma", .minimum = 0, - .maximum = MAX_GAMMA, + .maximum = GAMMA_MAX - 1, .step = 1, - .default_value = 0x09, + .default_value = GAMMA_DEF, }, .set = sd_setgamma, .get = sd_getgamma, @@ -197,7 +200,7 @@ static struct ctrl sd_ctrls[] = { .type = V4L2_CTRL_TYPE_INTEGER, .name = "Sharpness", .minimum = 0, - .maximum = MAX_GAMMA, /* 0 to 16 */ + .maximum = 15, .step = 1, .default_value = 0x06, }, @@ -258,7 +261,6 @@ static struct v4l2_pix_format vga_mode_t16[] = { .priv = 0}, }; -#define T16_OFFSET_DATA 631 #define MAX_EFFECTS 7 /* easily done by soft, this table could be removed, * i keep it here just in case */ @@ -272,87 +274,87 @@ static const __u8 effects_table[MAX_EFFECTS][6] = { {0xa8, 0xc8, 0xc6, 0xd2, 0xc0, 0x40}, /* Negative */ }; -static const __u8 gamma_table[MAX_GAMMA][34] = { - {0x90, 0x00, 0x91, 0x3e, 0x92, 0x69, 0x93, 0x85, +static const __u8 gamma_table[GAMMA_MAX][34] = { + {0x90, 0x00, 0x91, 0x3e, 0x92, 0x69, 0x93, 0x85, /* 0 */ 0x94, 0x95, 0x95, 0xa1, 0x96, 0xae, 0x97, 0xb9, 0x98, 0xc2, 0x99, 0xcb, 0x9a, 0xd4, 0x9b, 0xdb, 0x9c, 0xe3, 0x9d, 0xea, 0x9e, 0xf1, 0x9f, 0xf8, 0xa0, 0xff}, - {0x90, 0x00, 0x91, 0x33, 0x92, 0x5A, 0x93, 0x75, - 0x94, 0x85, 0x95, 0x93, 0x96, 0xA1, 0x97, 0xAD, - 0x98, 0xB7, 0x99, 0xC2, 0x9A, 0xCB, 0x9B, 0xD4, - 0x9C, 0xDE, 0x9D, 0xE7, 0x9E, 0xF0, 0x9F, 0xF7, + {0x90, 0x00, 0x91, 0x33, 0x92, 0x5a, 0x93, 0x75, /* 1 */ + 0x94, 0x85, 0x95, 0x93, 0x96, 0xa1, 0x97, 0xad, + 0x98, 0xb7, 0x99, 0xc2, 0x9a, 0xcb, 0x9b, 0xd4, + 0x9c, 0xde, 0x9D, 0xe7, 0x9e, 0xf0, 0x9f, 0xf7, 0xa0, 0xff}, - {0x90, 0x00, 0x91, 0x2F, 0x92, 0x51, 0x93, 0x6B, - 0x94, 0x7C, 0x95, 0x8A, 0x96, 0x99, 0x97, 0xA6, - 0x98, 0xB1, 0x99, 0xBC, 0x9A, 0xC6, 0x9B, 0xD0, - 0x9C, 0xDB, 0x9D, 0xE4, 0x9E, 0xED, 0x9F, 0xF6, + {0x90, 0x00, 0x91, 0x2f, 0x92, 0x51, 0x93, 0x6b, /* 2 */ + 0x94, 0x7c, 0x95, 0x8a, 0x96, 0x99, 0x97, 0xa6, + 0x98, 0xb1, 0x99, 0xbc, 0x9a, 0xc6, 0x9b, 0xd0, + 0x9c, 0xdb, 0x9d, 0xe4, 0x9e, 0xed, 0x9f, 0xf6, 0xa0, 0xff}, - {0x90, 0x00, 0x91, 0x29, 0x92, 0x48, 0x93, 0x60, - 0x94, 0x72, 0x95, 0x81, 0x96, 0x90, 0x97, 0x9E, - 0x98, 0xAA, 0x99, 0xB5, 0x9A, 0xBF, 0x9B, 0xCB, - 0x9C, 0xD6, 0x9D, 0xE1, 0x9E, 0xEB, 0x9F, 0xF5, + {0x90, 0x00, 0x91, 0x29, 0x92, 0x48, 0x93, 0x60, /* 3 */ + 0x94, 0x72, 0x95, 0x81, 0x96, 0x90, 0x97, 0x9e, + 0x98, 0xaa, 0x99, 0xb5, 0x9a, 0xbf, 0x9b, 0xcb, + 0x9c, 0xd6, 0x9d, 0xe1, 0x9e, 0xeb, 0x9f, 0xf5, 0xa0, 0xff}, - {0x90, 0x00, 0x91, 0x23, 0x92, 0x3F, 0x93, 0x55, + {0x90, 0x00, 0x91, 0x23, 0x92, 0x3f, 0x93, 0x55, /* 4 */ 0x94, 0x68, 0x95, 0x77, 0x96, 0x86, 0x97, 0x95, - 0x98, 0xA2, 0x99, 0xAD, 0x9A, 0xB9, 0x9B, 0xC6, - 0x9C, 0xD2, 0x9D, 0xDE, 0x9E, 0xE9, 0x9F, 0xF4, + 0x98, 0xa2, 0x99, 0xad, 0x9a, 0xb9, 0x9b, 0xc6, + 0x9c, 0xd2, 0x9d, 0xde, 0x9e, 0xe9, 0x9f, 0xf4, 0xa0, 0xff}, - {0x90, 0x00, 0x91, 0x1B, 0x92, 0x33, 0x93, 0x48, + {0x90, 0x00, 0x91, 0x1b, 0x92, 0x33, 0x93, 0x48, /* 5 */ 0x94, 0x59, 0x95, 0x69, 0x96, 0x79, 0x97, 0x87, - 0x98, 0x96, 0x99, 0xA3, 0x9A, 0xB1, 0x9B, 0xBE, - 0x9C, 0xCC, 0x9D, 0xDA, 0x9E, 0xE7, 0x9F, 0xF3, + 0x98, 0x96, 0x99, 0xa3, 0x9a, 0xb1, 0x9b, 0xbe, + 0x9c, 0xcc, 0x9d, 0xda, 0x9e, 0xe7, 0x9f, 0xf3, 0xa0, 0xff}, - {0x90, 0x00, 0x91, 0x02, 0x92, 0x10, 0x93, 0x20, + {0x90, 0x00, 0x91, 0x02, 0x92, 0x10, 0x93, 0x20, /* 6 */ 0x94, 0x32, 0x95, 0x40, 0x96, 0x57, 0x97, 0x67, 0x98, 0x77, 0x99, 0x88, 0x9a, 0x99, 0x9b, 0xaa, 0x9c, 0xbb, 0x9d, 0xcc, 0x9e, 0xdd, 0x9f, 0xee, 0xa0, 0xff}, - {0x90, 0x00, 0x91, 0x02, 0x92, 0x14, 0x93, 0x26, - 0x94, 0x38, 0x95, 0x4A, 0x96, 0x60, 0x97, 0x70, - 0x98, 0x80, 0x99, 0x90, 0x9A, 0xA0, 0x9B, 0xB0, - 0x9C, 0xC0, 0x9D, 0xD0, 0x9E, 0xE0, 0x9F, 0xF0, + {0x90, 0x00, 0x91, 0x02, 0x92, 0x14, 0x93, 0x26, /* 7 */ + 0x94, 0x38, 0x95, 0x4a, 0x96, 0x60, 0x97, 0x70, + 0x98, 0x80, 0x99, 0x90, 0x9a, 0xa0, 0x9b, 0xb0, + 0x9c, 0xc0, 0x9D, 0xd0, 0x9e, 0xe0, 0x9f, 0xf0, 0xa0, 0xff}, - {0x90, 0x00, 0x91, 0x10, 0x92, 0x22, 0x93, 0x35, - 0x94, 0x47, 0x95, 0x5A, 0x96, 0x69, 0x97, 0x79, - 0x98, 0x88, 0x99, 0x97, 0x9A, 0xA7, 0x9B, 0xB6, - 0x9C, 0xC4, 0x9D, 0xD3, 0x9E, 0xE0, 0x9F, 0xF0, + {0x90, 0x00, 0x91, 0x10, 0x92, 0x22, 0x93, 0x35, /* 8 */ + 0x94, 0x47, 0x95, 0x5a, 0x96, 0x69, 0x97, 0x79, + 0x98, 0x88, 0x99, 0x97, 0x9a, 0xa7, 0x9b, 0xb6, + 0x9c, 0xc4, 0x9d, 0xd3, 0x9e, 0xe0, 0x9f, 0xf0, 0xa0, 0xff}, - {0x90, 0x00, 0x91, 0x10, 0x92, 0x26, 0x93, 0x40, + {0x90, 0x00, 0x91, 0x10, 0x92, 0x26, 0x93, 0x40, /* 9 */ 0x94, 0x54, 0x95, 0x65, 0x96, 0x75, 0x97, 0x84, 0x98, 0x93, 0x99, 0xa1, 0x9a, 0xb0, 0x9b, 0xbd, 0x9c, 0xca, 0x9d, 0xd6, 0x9e, 0xe0, 0x9f, 0xf0, 0xa0, 0xff}, - {0x90, 0x00, 0x91, 0x18, 0x92, 0x2B, 0x93, 0x44, - 0x94, 0x60, 0x95, 0x70, 0x96, 0x80, 0x97, 0x8E, - 0x98, 0x9C, 0x99, 0xAA, 0x9A, 0xB7, 0x9B, 0xC4, - 0x9C, 0xD0, 0x9D, 0xD8, 0x9E, 0xE2, 0x9F, 0xF0, + {0x90, 0x00, 0x91, 0x18, 0x92, 0x2b, 0x93, 0x44, /* 10 */ + 0x94, 0x60, 0x95, 0x70, 0x96, 0x80, 0x97, 0x8e, + 0x98, 0x9c, 0x99, 0xaa, 0x9a, 0xb7, 0x9b, 0xc4, + 0x9c, 0xd0, 0x9d, 0xd8, 0x9e, 0xe2, 0x9f, 0xf0, 0xa0, 0xff}, - {0x90, 0x00, 0x91, 0x1A, 0x92, 0x34, 0x93, 0x52, - 0x94, 0x66, 0x95, 0x7E, 0x96, 0x8D, 0x97, 0x9B, - 0x98, 0xA8, 0x99, 0xB4, 0x9A, 0xC0, 0x9B, 0xCB, - 0x9C, 0xD6, 0x9D, 0xE1, 0x9E, 0xEB, 0x9F, 0xF5, + {0x90, 0x00, 0x91, 0x1a, 0x92, 0x34, 0x93, 0x52, /* 11 */ + 0x94, 0x66, 0x95, 0x7e, 0x96, 0x8D, 0x97, 0x9B, + 0x98, 0xa8, 0x99, 0xb4, 0x9a, 0xc0, 0x9b, 0xcb, + 0x9c, 0xd6, 0x9d, 0xe1, 0x9e, 0xeb, 0x9f, 0xf5, 0xa0, 0xff}, - {0x90, 0x00, 0x91, 0x3F, 0x92, 0x5A, 0x93, 0x6E, - 0x94, 0x7F, 0x95, 0x8E, 0x96, 0x9C, 0x97, 0xA8, - 0x98, 0xB4, 0x99, 0xBF, 0x9A, 0xC9, 0x9B, 0xD3, - 0x9C, 0xDC, 0x9D, 0xE5, 0x9E, 0xEE, 0x9F, 0xF6, - 0xA0, 0xFF}, - {0x90, 0x00, 0x91, 0x54, 0x92, 0x6F, 0x93, 0x83, - 0x94, 0x93, 0x95, 0xA0, 0x96, 0xAD, 0x97, 0xB7, - 0x98, 0xC2, 0x99, 0xCB, 0x9A, 0xD4, 0x9B, 0xDC, - 0x9C, 0xE4, 0x9D, 0xEB, 0x9E, 0xF2, 0x9F, 0xF9, + {0x90, 0x00, 0x91, 0x3f, 0x92, 0x5a, 0x93, 0x6e, /* 12 */ + 0x94, 0x7f, 0x95, 0x8e, 0x96, 0x9c, 0x97, 0xa8, + 0x98, 0xb4, 0x99, 0xbf, 0x9a, 0xc9, 0x9b, 0xd3, + 0x9c, 0xdc, 0x9d, 0xe5, 0x9e, 0xee, 0x9f, 0xf6, 0xa0, 0xff}, - {0x90, 0x00, 0x91, 0x6E, 0x92, 0x88, 0x93, 0x9A, - 0x94, 0xA8, 0x95, 0xB3, 0x96, 0xBD, 0x97, 0xC6, - 0x98, 0xCF, 0x99, 0xD6, 0x9A, 0xDD, 0x9B, 0xE3, - 0x9C, 0xE9, 0x9D, 0xEF, 0x9E, 0xF4, 0x9F, 0xFA, + {0x90, 0x00, 0x91, 0x54, 0x92, 0x6f, 0x93, 0x83, /* 13 */ + 0x94, 0x93, 0x95, 0xa0, 0x96, 0xad, 0x97, 0xb7, + 0x98, 0xc2, 0x99, 0xcb, 0x9a, 0xd4, 0x9b, 0xdc, + 0x9c, 0xe4, 0x9d, 0xeb, 0x9e, 0xf2, 0x9f, 0xf9, 0xa0, 0xff}, - {0x90, 0x00, 0x91, 0x93, 0x92, 0xA8, 0x93, 0xB7, - 0x94, 0xC1, 0x95, 0xCA, 0x96, 0xD2, 0x97, 0xD8, - 0x98, 0xDE, 0x99, 0xE3, 0x9A, 0xE8, 0x9B, 0xED, - 0x9C, 0xF1, 0x9D, 0xF5, 0x9E, 0xF8, 0x9F, 0xFC, - 0xA0, 0xFF} + {0x90, 0x00, 0x91, 0x6e, 0x92, 0x88, 0x93, 0x9a, /* 14 */ + 0x94, 0xa8, 0x95, 0xb3, 0x96, 0xbd, 0x97, 0xc6, + 0x98, 0xcf, 0x99, 0xd6, 0x9a, 0xdd, 0x9b, 0xe3, + 0x9c, 0xe9, 0x9d, 0xef, 0x9e, 0xf4, 0x9f, 0xfa, + 0xa0, 0xff}, + {0x90, 0x00, 0x91, 0x93, 0x92, 0xa8, 0x93, 0xb7, /* 15 */ + 0x94, 0xc1, 0x95, 0xca, 0x96, 0xd2, 0x97, 0xd8, + 0x98, 0xde, 0x99, 0xe3, 0x9a, 0xe8, 0x9b, 0xed, + 0x9c, 0xf1, 0x9d, 0xf5, 0x9e, 0xf8, 0x9f, 0xfc, + 0xa0, 0xff} }; static const __u8 tas5130a_sensor_init[][8] = { @@ -364,7 +366,7 @@ static const __u8 tas5130a_sensor_init[][8] = { }; /* read 1 byte */ -static int reg_r_1(struct gspca_dev *gspca_dev, +static int reg_r(struct gspca_dev *gspca_dev, __u16 index) { usb_control_msg(gspca_dev->dev, @@ -378,26 +380,26 @@ static int reg_r_1(struct gspca_dev *gspca_dev, } static void reg_w(struct gspca_dev *gspca_dev, - __u16 value, - __u16 index, - const __u8 *buffer, __u16 len) + __u16 index) +{ + usb_control_msg(gspca_dev->dev, + usb_sndctrlpipe(gspca_dev->dev, 0), + 0, + USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_INTERFACE, + 0, index, + NULL, 0, 500); +} + +static void i2c_w(struct gspca_dev *gspca_dev, + const __u8 *buffer, __u16 len) { - if (buffer == NULL) { - usb_control_msg(gspca_dev->dev, - usb_sndctrlpipe(gspca_dev->dev, 0), - 0, - USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_INTERFACE, - value, index, - NULL, 0, 500); - return; - } if (len <= USB_BUF_SZ) { memcpy(gspca_dev->usb_buf, buffer, len); usb_control_msg(gspca_dev->dev, usb_sndctrlpipe(gspca_dev->dev, 0), 0, USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_INTERFACE, - value, index, + 0x01, 0, gspca_dev->usb_buf, len, 500); } else { __u8 *tmpbuf; @@ -408,12 +410,56 @@ static void reg_w(struct gspca_dev *gspca_dev, usb_sndctrlpipe(gspca_dev->dev, 0), 0, USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_INTERFACE, - value, index, + 0x01, 0, tmpbuf, len, 500); kfree(tmpbuf); } } +static void other_sensor_init(struct gspca_dev *gspca_dev) +{ + int i; + const __u8 *p; + __u8 byte; + __u8 val[6] = {0x62, 0, 0x64, 0, 0x60, 0x05}; + static const __u8 sensor_init[] = { + 0xdf, 0x6d, + 0xdd, 0x18, + 0x5a, 0xe0, + 0x5c, 0x07, + 0x5d, 0xb0, + 0x5e, 0x1e, + 0x60, 0x71, + 0xef, 0x00, + 0xe9, 0x00, + 0xea, 0x00, + 0x90, 0x24, + 0x91, 0xb2, + 0x82, 0x32, + 0xfd, 0x00, + 0xfd, 0x01, + 0xfd, 0x41, + 0x00 /* table end */ + }; + + p = sensor_init; + while (*p != 0) { + val[1] = *p++; + val[3] = *p++; + if (*p == 0) + reg_w(gspca_dev, 0x3c80); + i2c_w(gspca_dev, val, sizeof val); + i = 4; + while (--i >= 0) { + msleep(15); + byte = reg_r(gspca_dev, 0x60); + if (!(byte & 0x01)) + break; + } + } + reg_w(gspca_dev, 0x3c80); +} + /* this function is called at probe time */ static int sd_config(struct gspca_dev *gspca_dev, const struct usb_device_id *id) @@ -430,7 +476,7 @@ static int sd_config(struct gspca_dev *gspca_dev, sd->brightness = sd_ctrls[SD_BRIGHTNESS].qctrl.default_value; sd->contrast = sd_ctrls[SD_CONTRAST].qctrl.default_value; sd->colors = sd_ctrls[SD_COLOR].qctrl.default_value; - sd->gamma = sd_ctrls[SD_GAMMA].qctrl.default_value; + sd->gamma = GAMMA_DEF; sd->mirror = sd_ctrls[SD_MIRROR].qctrl.default_value; sd->freq = sd_ctrls[SD_LIGHTFREQ].qctrl.default_value; sd->whitebalance = sd_ctrls[SD_WHITE_BALANCE].qctrl.default_value; @@ -439,27 +485,37 @@ static int sd_config(struct gspca_dev *gspca_dev, return 0; } -static int init_default_parameters(struct gspca_dev *gspca_dev) +static void setgamma(struct gspca_dev *gspca_dev) +{ + struct sd *sd = (struct sd *) gspca_dev; + + PDEBUG(D_CONF, "Gamma: %d", sd->gamma); + i2c_w(gspca_dev, gamma_table[sd->gamma], sizeof gamma_table[0]); +} + +/* this function is called at probe and resume time */ +static int sd_init(struct gspca_dev *gspca_dev) { /* some of this registers are not really neded, because * they are overriden by setbrigthness, setcontrast, etc, * but wont hurt anyway, and can help someone with similar webcam * to see the initial parameters.*/ - int i = 0; - __u8 test_byte; + struct sd *sd = (struct sd *) gspca_dev; + int i; + __u8 byte, test_byte; static const __u8 read_indexs[] = { 0x06, 0x07, 0x0a, 0x0b, 0x66, 0x80, 0x81, 0x8e, 0x8f, 0xa5, 0xa6, 0xa8, 0xbb, 0xbc, 0xc6, 0x00, 0x00 }; - static const __u8 n1[6] = + static const __u8 n1[] = {0x08, 0x03, 0x09, 0x03, 0x12, 0x04}; - static const __u8 n2[2] = + static const __u8 n2[] = {0x08, 0x00}; - static const __u8 nset[6] = - { 0x61, 0x68, 0x62, 0xff, 0x60, 0x07 }; - static const __u8 n3[6] = + static const __u8 nset[] = + { 0x61, 0x68, 0x62, 0xff, 0x60, 0x07 }; + static const __u8 n3[] = {0x61, 0x68, 0x65, 0x0a, 0x60, 0x04}; - static const __u8 n4[0x46] = + static const __u8 n4[] = {0x09, 0x01, 0x12, 0x04, 0x66, 0x8a, 0x80, 0x3c, 0x81, 0x22, 0x84, 0x50, 0x8a, 0x78, 0x8b, 0x68, 0x8c, 0x88, 0x8e, 0x33, 0x8f, 0x24, 0xaa, 0xb1, @@ -469,33 +525,26 @@ static int init_default_parameters(struct gspca_dev *gspca_dev) 0x65, 0x0a, 0xbb, 0x86, 0xaf, 0x58, 0xb0, 0x68, 0x87, 0x40, 0x89, 0x2b, 0x8d, 0xff, 0x83, 0x40, 0xac, 0x84, 0xad, 0x86, 0xaf, 0x46}; - static const __u8 nset4[18] = { + static const __u8 nset4[] = { 0xe0, 0x60, 0xe1, 0xa8, 0xe2, 0xe0, 0xe3, 0x60, 0xe4, 0xa8, 0xe5, 0xe0, 0xe6, 0x60, 0xe7, 0xa8, 0xe8, 0xe0 }; /* ojo puede ser 0xe6 en vez de 0xe9 */ - static const __u8 nset2[20] = { + static const __u8 nset2[] = { 0xd0, 0xbb, 0xd1, 0x28, 0xd2, 0x10, 0xd3, 0x10, 0xd4, 0xbb, 0xd5, 0x28, 0xd6, 0x1e, 0xd7, 0x27, 0xd8, 0xc8, 0xd9, 0xfc }; - static const __u8 missing[8] = + static const __u8 missing[] = { 0x87, 0x20, 0x88, 0x20, 0x89, 0x20, 0x80, 0x38 }; - static const __u8 nset3[18] = { + static const __u8 nset3[] = { 0xc7, 0x60, 0xc8, 0xa8, 0xc9, 0xe0, 0xca, 0x60, 0xcb, 0xa8, 0xcc, 0xe0, 0xcd, 0x60, 0xce, 0xa8, 0xcf, 0xe0 }; - static const __u8 nset5[4] = - { 0x8f, 0x24, 0xc3, 0x00 }; /* bright */ - static const __u8 nset6[34] = { - 0x90, 0x00, 0x91, 0x1c, 0x92, 0x30, 0x93, 0x43, 0x94, 0x54, - 0x95, 0x65, 0x96, 0x75, 0x97, 0x84, - 0x98, 0x93, 0x99, 0xa1, 0x9a, 0xb0, 0x9b, 0xbd, 0x9c, 0xca, - 0x9d, 0xd8, 0x9e, 0xe5, 0x9f, 0xf2, - 0xa0, 0xff - }; /* Gamma */ + static const __u8 nset5[] = + { 0x8f, 0x24, 0xc3, 0x00 }; /* bright */ static const __u8 nset7[4] = { 0x66, 0xca, 0xa8, 0xf8 }; /* 50/60 Hz */ static const __u8 nset9[4] = @@ -505,57 +554,74 @@ static int init_default_parameters(struct gspca_dev *gspca_dev) static const __u8 nset10[6] = { 0x0c, 0x03, 0xab, 0x10, 0x81, 0x20 }; - reg_w(gspca_dev, 0x01, 0x0000, n1, 0x06); - reg_w(gspca_dev, 0x01, 0x0000, nset, 0x06); - reg_r_1(gspca_dev, 0x0063); - reg_w(gspca_dev, 0x01, 0x0000, n2, 0x02); + byte = reg_r(gspca_dev, 0x06); + test_byte = reg_r(gspca_dev, 0x07); + if (byte == 0x08 && test_byte == 0x07) { + PDEBUG(D_CONF, "other sensor"); + sd->sensor = SENSOR_OTHER; + } else { + PDEBUG(D_CONF, "sensor %02x %02x", byte, test_byte); + sd->sensor = SENSOR_TAS5130A; + } + + i2c_w(gspca_dev, n1, sizeof n1); + test_byte = 0; + i = 5; + while (--i >= 0) { + i2c_w(gspca_dev, nset, sizeof nset); + msleep(5); + test_byte = reg_r(gspca_dev, 0x0063); + msleep(100); + if (test_byte == 0x17) + break; /* OK */ + } + if (i < 0) { + err("Bad sensor reset %02x", test_byte); +/* return -EIO; */ +/*fixme: test - continue */ + } + i2c_w(gspca_dev, n2, sizeof n2); + i = 0; while (read_indexs[i] != 0x00) { - test_byte = reg_r_1(gspca_dev, read_indexs[i]); - PDEBUG(D_CONF, "Reg 0x%02x => 0x%02x", read_indexs[i], + test_byte = reg_r(gspca_dev, read_indexs[i]); + PDEBUG(D_STREAM, "Reg 0x%02x = 0x%02x", read_indexs[i], test_byte); i++; } - reg_w(gspca_dev, 0x01, 0x0000, n3, 0x06); - reg_w(gspca_dev, 0x01, 0x0000, n4, 0x46); - reg_r_1(gspca_dev, 0x0080); - reg_w(gspca_dev, 0x00, 0x2c80, NULL, 0); - reg_w(gspca_dev, 0x01, 0x0000, nset2, 0x14); - reg_w(gspca_dev, 0x01, 0x0000, nset3, 0x12); - reg_w(gspca_dev, 0x01, 0x0000, nset4, 0x12); - reg_w(gspca_dev, 0x00, 0x3880, NULL, 0); - reg_w(gspca_dev, 0x00, 0x3880, NULL, 0); - reg_w(gspca_dev, 0x00, 0x338e, NULL, 0); - reg_w(gspca_dev, 0x01, 0x0000, nset5, 0x04); - reg_w(gspca_dev, 0x00, 0x00a9, NULL, 0); - reg_w(gspca_dev, 0x01, 0x0000, nset6, 0x22); - reg_w(gspca_dev, 0x00, 0x86bb, NULL, 0); - reg_w(gspca_dev, 0x00, 0x4aa6, NULL, 0); - - reg_w(gspca_dev, 0x01, 0x0000, missing, 0x08); - - reg_w(gspca_dev, 0x00, 0x2087, NULL, 0); - reg_w(gspca_dev, 0x00, 0x2088, NULL, 0); - reg_w(gspca_dev, 0x00, 0x2089, NULL, 0); - - reg_w(gspca_dev, 0x01, 0x0000, nset7, 0x04); - reg_w(gspca_dev, 0x01, 0x0000, nset10, 0x06); - reg_w(gspca_dev, 0x01, 0x0000, nset8, 0x06); - reg_w(gspca_dev, 0x01, 0x0000, nset9, 0x04); - - reg_w(gspca_dev, 0x00, 0x2880, NULL, 0); - reg_w(gspca_dev, 0x01, 0x0000, nset2, 0x14); - reg_w(gspca_dev, 0x01, 0x0000, nset3, 0x12); - reg_w(gspca_dev, 0x01, 0x0000, nset4, 0x12); - - return 0; -} + i2c_w(gspca_dev, n3, sizeof n3); + i2c_w(gspca_dev, n4, sizeof n4); + reg_r(gspca_dev, 0x0080); + reg_w(gspca_dev, 0x2c80); + i2c_w(gspca_dev, nset2, sizeof nset2); + i2c_w(gspca_dev, nset3, sizeof nset3); + i2c_w(gspca_dev, nset4, sizeof nset4); + reg_w(gspca_dev, 0x3880); + reg_w(gspca_dev, 0x3880); + reg_w(gspca_dev, 0x338e); + i2c_w(gspca_dev, nset5, sizeof nset5); + reg_w(gspca_dev, 0x00a9); + setgamma(gspca_dev); + reg_w(gspca_dev, 0x86bb); + reg_w(gspca_dev, 0x4aa6); + + i2c_w(gspca_dev, missing, sizeof missing); + + reg_w(gspca_dev, 0x2087); + reg_w(gspca_dev, 0x2088); + reg_w(gspca_dev, 0x2089); + + i2c_w(gspca_dev, nset7, sizeof nset7); + i2c_w(gspca_dev, nset10, sizeof nset10); + i2c_w(gspca_dev, nset8, sizeof nset8); + i2c_w(gspca_dev, nset9, sizeof nset9); + + reg_w(gspca_dev, 0x2880); + i2c_w(gspca_dev, nset2, sizeof nset2); + i2c_w(gspca_dev, nset3, sizeof nset3); + i2c_w(gspca_dev, nset4, sizeof nset4); -/* this function is called at probe and resume time */ -static int sd_init(struct gspca_dev *gspca_dev) -{ - init_default_parameters(gspca_dev); return 0; } @@ -563,37 +629,36 @@ static void setbrightness(struct gspca_dev *gspca_dev) { struct sd *sd = (struct sd *) gspca_dev; unsigned int brightness; - __u8 set6[4] = { 0x8f, 0x26, 0xc3, 0x80 }; - brightness = sd->brightness; + __u8 set6[4] = { 0x8f, 0x26, 0xc3, 0x00 }; + brightness = sd->brightness; if (brightness < 7) { - set6[3] = 0x70 - (brightness * 0xa); + set6[3] = 0x70 - brightness * 0x10; } else { set6[1] = 0x24; - set6[3] = 0x00 + ((brightness - 7) * 0xa); + set6[3] = 0x00 + ((brightness - 7) * 0x10); } - reg_w(gspca_dev, 0x01, 0x0000, set6, 4); + i2c_w(gspca_dev, set6, sizeof set6); } static void setflip(struct gspca_dev *gspca_dev) { struct sd *sd = (struct sd *) gspca_dev; - __u8 flipcmd[8] = - { 0x62, 0x07, 0x63, 0x03, 0x64, 0x00, 0x60, 0x09 }; + {0x62, 0x07, 0x63, 0x03, 0x64, 0x00, 0x60, 0x09}; - if (sd->mirror == 1) + if (sd->mirror) flipcmd[3] = 0x01; - reg_w(gspca_dev, 0x01, 0x0000, flipcmd, 8); + i2c_w(gspca_dev, flipcmd, sizeof flipcmd); } static void seteffect(struct gspca_dev *gspca_dev) { struct sd *sd = (struct sd *) gspca_dev; - reg_w(gspca_dev, 0x01, 0x0000, effects_table[sd->effect], 0x06); + i2c_w(gspca_dev, effects_table[sd->effect], sizeof effects_table[0]); if (sd->effect == 1 || sd->effect == 5) { PDEBUG(D_CONF, "This effect have been disabled for webcam \"safety\""); @@ -601,9 +666,9 @@ static void seteffect(struct gspca_dev *gspca_dev) } if (sd->effect == 1 || sd->effect == 4) - reg_w(gspca_dev, 0x00, 0x4aa6, NULL, 0); + reg_w(gspca_dev, 0x4aa6); else - reg_w(gspca_dev, 0x00, 0xfaa6, NULL, 0); + reg_w(gspca_dev, 0xfaa6); } static void setwhitebalance(struct gspca_dev *gspca_dev) @@ -616,7 +681,7 @@ static void setwhitebalance(struct gspca_dev *gspca_dev) if (sd->whitebalance == 1) white_balance[7] = 0x3c; - reg_w(gspca_dev, 0x01, 0x0000, white_balance, 8); + i2c_w(gspca_dev, white_balance, sizeof white_balance); } static void setlightfreq(struct gspca_dev *gspca_dev) @@ -627,21 +692,21 @@ static void setlightfreq(struct gspca_dev *gspca_dev) if (sd->freq == 2) /* 60hz */ freq[1] = 0x00; - reg_w(gspca_dev, 0x1, 0x0000, freq, 0x4); + i2c_w(gspca_dev, freq, sizeof freq); } static void setcontrast(struct gspca_dev *gspca_dev) { struct sd *sd = (struct sd *) gspca_dev; unsigned int contrast = sd->contrast; - __u16 reg_to_write = 0x00; + __u16 reg_to_write; if (contrast < 7) reg_to_write = 0x8ea9 - (0x200 * contrast); else reg_to_write = (0x00a9 + ((contrast - 7) * 0x200)); - reg_w(gspca_dev, 0x00, reg_to_write, NULL, 0); + reg_w(gspca_dev, reg_to_write); } static void setcolors(struct gspca_dev *gspca_dev) @@ -650,11 +715,7 @@ static void setcolors(struct gspca_dev *gspca_dev) __u16 reg_to_write; reg_to_write = 0xc0bb + sd->colors * 0x100; - reg_w(gspca_dev, 0x00, reg_to_write, NULL, 0); -} - -static void setgamma(struct gspca_dev *gspca_dev) -{ + reg_w(gspca_dev, reg_to_write); } static void setsharpness(struct gspca_dev *gspca_dev) @@ -664,7 +725,99 @@ static void setsharpness(struct gspca_dev *gspca_dev) reg_to_write = 0x0aa6 + 0x1000 * sd->sharpness; - reg_w(gspca_dev, 0x00, reg_to_write, NULL, 0); + reg_w(gspca_dev, reg_to_write); +} + +static int sd_start(struct gspca_dev *gspca_dev) +{ + struct sd *sd = (struct sd *) gspca_dev; + int i, mode; + static const __u8 t1[] = { 0x66, 0x00, 0xa8, 0xe8 }; + __u8 t2[] = { 0x07, 0x00, 0x0d, 0x60, 0x0e, 0x80 }; + static const __u8 t3[] = + { 0xb3, 0x07, 0xb4, 0x00, 0xb5, 0x88, 0xb6, 0x02, 0xb7, 0x06, + 0xb8, 0x00, 0xb9, 0xe7, 0xba, 0x01 }; + static const __u8 t4[] = { 0x0b, 0x04, 0x0a, 0x40 }; + + mode = gspca_dev->cam.cam_mode[(int) gspca_dev->curr_mode]. priv; + switch (mode) { + case 1: /* 352x288 */ + t2[1] = 0x40; + break; + case 2: /* 320x240 */ + t2[1] = 0x10; + break; + case 3: /* 176x144 */ + t2[1] = 0x50; + break; + case 4: /* 160x120 */ + t2[1] = 0x20; + break; + default: /* 640x480 (0x00) */ + break; + } + + if (sd->sensor == SENSOR_TAS5130A) { + i = 0; + while (tas5130a_sensor_init[i][0] != 0) { + i2c_w(gspca_dev, tas5130a_sensor_init[i], + sizeof tas5130a_sensor_init[0]); + i++; + } + reg_w(gspca_dev, 0x3c80); + /* just in case and to keep sync with logs (for mine) */ + i2c_w(gspca_dev, tas5130a_sensor_init[3], + sizeof tas5130a_sensor_init[0]); + reg_w(gspca_dev, 0x3c80); + } else { + other_sensor_init(gspca_dev); + } + /* just in case and to keep sync with logs (for mine) */ + i2c_w(gspca_dev, t1, sizeof t1); + i2c_w(gspca_dev, t2, sizeof t2); + reg_r(gspca_dev, 0x0012); + i2c_w(gspca_dev, t3, sizeof t3); + reg_w(gspca_dev, 0x0013); + i2c_w(gspca_dev, t4, sizeof t4); + /* restart on each start, just in case, sometimes regs goes wrong + * when using controls from app */ + setbrightness(gspca_dev); + setcontrast(gspca_dev); + setcolors(gspca_dev); + return 0; +} + +static void sd_pkt_scan(struct gspca_dev *gspca_dev, + struct gspca_frame *frame, /* target */ + __u8 *data, /* isoc packet */ + int len) /* iso packet length */ +{ + static __u8 ffd9[] = { 0xff, 0xd9 }; + + if (data[0] == 0x5a) { + /* Control Packet, after this came the header again, + * but extra bytes came in the packet before this, + * sometimes an EOF arrives, sometimes not... */ + return; + } + data += 2; + len -= 2; + if (data[0] == 0xff && data[1] == 0xd8) { + /* extra bytes....., could be processed too but would be + * a waste of time, right now leave the application and + * libjpeg do it for ourserlves.. */ + frame = gspca_frame_add(gspca_dev, LAST_PACKET, frame, + ffd9, 2); + gspca_frame_add(gspca_dev, FIRST_PACKET, frame, data, len); + return; + } + + if (data[len - 2] == 0xff && data[len - 1] == 0xd9) { + /* Just in case, i have seen packets with the marker, + * other's do not include it... */ + len -= 2; + } + gspca_frame_add(gspca_dev, INTER_PACKET, frame, data, len); } static int sd_setbrightness(struct gspca_dev *gspca_dev, __s32 val) @@ -788,6 +941,7 @@ static int sd_setgamma(struct gspca_dev *gspca_dev, __s32 val) static int sd_getgamma(struct gspca_dev *gspca_dev, __s32 *val) { struct sd *sd = (struct sd *) gspca_dev; + *val = sd->gamma; return 0; } @@ -835,9 +989,9 @@ static int sd_setlowlight(struct gspca_dev *gspca_dev, __s32 val) sd->autogain = val; if (val != 0) - reg_w(gspca_dev, 0x00, 0xf48e, NULL, 0); + reg_w(gspca_dev, 0xf48e); else - reg_w(gspca_dev, 0x00, 0xb48e, NULL, 0); + reg_w(gspca_dev, 0xb48e); return 0; } @@ -849,100 +1003,6 @@ static int sd_getlowlight(struct gspca_dev *gspca_dev, __s32 *val) return 0; } -static int sd_start(struct gspca_dev *gspca_dev) -{ - int mode; - - static const __u8 t1[] = { 0x66, 0x00, 0xa8, 0xe8 }; - __u8 t2[] = { 0x07, 0x00, 0x0d, 0x60, 0x0e, 0x80 }; - static const __u8 t3[] = - { 0xb3, 0x07, 0xb4, 0x00, 0xb5, 0x88, 0xb6, 0x02, 0xb7, 0x06, - 0xb8, 0x00, 0xb9, 0xe7, 0xba, 0x01 }; - static const __u8 t4[] = { 0x0b, 0x04, 0x0a, 0x40 }; - - mode = gspca_dev->cam.cam_mode[(int) gspca_dev->curr_mode]. priv; - switch (mode) { - case 1: /* 352x288 */ - t2[1] = 0x40; - break; - case 2: /* 320x240 */ - t2[1] = 0x10; - break; - case 3: /* 176x144 */ - t2[1] = 0x50; - break; - case 4: /* 160x120 */ - t2[1] = 0x20; - break; - default: /* 640x480 (0x00) */ - break; - } - - reg_w(gspca_dev, 0x01, 0x0000, tas5130a_sensor_init[0], 0x8); - reg_w(gspca_dev, 0x01, 0x0000, tas5130a_sensor_init[1], 0x8); - reg_w(gspca_dev, 0x01, 0x0000, tas5130a_sensor_init[2], 0x8); - reg_w(gspca_dev, 0x01, 0x0000, tas5130a_sensor_init[3], 0x8); - reg_w(gspca_dev, 0x00, 0x3c80, NULL, 0); - /* just in case and to keep sync with logs (for mine) */ - reg_w(gspca_dev, 0x01, 0x0000, tas5130a_sensor_init[3], 0x8); - reg_w(gspca_dev, 0x00, 0x3c80, NULL, 0); - /* just in case and to keep sync with logs (for mine) */ - reg_w(gspca_dev, 0x01, 0x0000, t1, 4); - reg_w(gspca_dev, 0x01, 0x0000, t2, 6); - reg_r_1(gspca_dev, 0x0012); - reg_w(gspca_dev, 0x01, 0x0000, t3, 0x10); - reg_w(gspca_dev, 0x00, 0x0013, NULL, 0); - reg_w(gspca_dev, 0x01, 0x0000, t4, 0x4); - /* restart on each start, just in case, sometimes regs goes wrong - * when using controls from app */ - setbrightness(gspca_dev); - setcontrast(gspca_dev); - setcolors(gspca_dev); - return 0; -} - -static void sd_pkt_scan(struct gspca_dev *gspca_dev, - struct gspca_frame *frame, /* target */ - __u8 *data, /* isoc packet */ - int len) /* iso packet length */ -{ - int sof = 0; - static __u8 ffd9[] = { 0xff, 0xd9 }; - - if (data[0] == 0x5a) { - /* Control Packet, after this came the header again, - * but extra bytes came in the packet before this, - * sometimes an EOF arrives, sometimes not... */ - return; - } - - if (data[len - 2] == 0xff && data[len - 1] == 0xd9) { - /* Just in case, i have seen packets with the marker, - * other's do not include it... */ - data += 2; - len -= 4; - } else if (data[2] == 0xff && data[3] == 0xd8) { - sof = 1; - data += 2; - len -= 2; - } else { - data += 2; - len -= 2; - } - - if (sof) { - /* extra bytes....., could be processed too but would be - * a waste of time, right now leave the application and - * libjpeg do it for ourserlves.. */ - frame = gspca_frame_add(gspca_dev, LAST_PACKET, frame, - ffd9, 2); - gspca_frame_add(gspca_dev, FIRST_PACKET, frame, data, len); - return; - } - - gspca_frame_add(gspca_dev, INTER_PACKET, frame, data, len); -} - static int sd_querymenu(struct gspca_dev *gspca_dev, struct v4l2_querymenu *menu) { -- cgit v0.10.2 From f1918fa284afaa46201b9c20a7bbeacd8db0c977 Mon Sep 17 00:00:00 2001 From: Jean-Francois Moine Date: Thu, 9 Oct 2008 03:14:03 -0300 Subject: V4L/DVB (9126): gspca: Fix some compilation warnings in m5602. Signed-off-by: Jean-Francois Moine Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/gspca/m5602/m5602_mt9m111.c b/drivers/media/video/gspca/m5602/m5602_mt9m111.c index ea22502..566d492 100644 --- a/drivers/media/video/gspca/m5602/m5602_mt9m111.c +++ b/drivers/media/video/gspca/m5602/m5602_mt9m111.c @@ -69,7 +69,7 @@ sensor_found: int mt9m111_init(struct sd *sd) { - int i, err; + int i, err = 0; /* Init the sensor */ for (i = 0; i < ARRAY_SIZE(init_mt9m111); i++) { diff --git a/drivers/media/video/gspca/m5602/m5602_ov9650.h b/drivers/media/video/gspca/m5602/m5602_ov9650.h index 486ea33..2f29cb0 100644 --- a/drivers/media/video/gspca/m5602/m5602_ov9650.h +++ b/drivers/media/video/gspca/m5602/m5602_ov9650.h @@ -466,7 +466,9 @@ static const unsigned char power_down_ov9650[][3] = /* Vertically and horizontally flips the image if matched, needed for machines where the sensor is mounted upside down */ -static const struct dmi_system_id ov9650_flip_dmi_table[] = { +static + const + struct dmi_system_id ov9650_flip_dmi_table[] = { { .ident = "ASUS A6VC", .matches = { diff --git a/drivers/media/video/gspca/m5602/m5602_s5k4aa.h b/drivers/media/video/gspca/m5602/m5602_s5k4aa.h index 1e4213a..bb7f7e3 100644 --- a/drivers/media/video/gspca/m5602/m5602_s5k4aa.h +++ b/drivers/media/video/gspca/m5602/m5602_s5k4aa.h @@ -339,7 +339,9 @@ static const unsigned char init_s5k4aa[][4] = {SENSOR, S5K4AA_GAIN_2, 0xa0, 0x00} }; -static const struct dmi_system_id s5k4aa_vflip_dmi_table[] = { +static + const + struct dmi_system_id s5k4aa_vflip_dmi_table[] = { { .ident = "Fujitsu-Siemens Amilo Xa 2528", .matches = { -- cgit v0.10.2 From 9eee4fb69ecbe6a8a25378e801a3621ef0146fa3 Mon Sep 17 00:00:00 2001 From: Andy Walls Date: Sat, 4 Oct 2008 20:28:40 -0300 Subject: V4L/DVB (9131): cx18: Add entries for the Leadtek PVR2100 and Toshiba Qosmio DVB-T/Analog cx18: Add entries for the Leadtek PVR2100 and Toshiba Qosmio DVB-T/Analog capture cards. Both cards are hybrids cards, but no digital capture functionality has been added yet. These entries are a first guess at the card entries to get analog working, given the information available. Terry Wu provided a pointer to information for the PVR2100. Martin Juhl , an owner of the Toshiba DVB-T/Analog tuner card, provided the DDR timing information from his Windows inf file. Signed-off-by: Andy Walls Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/cx18/cx18-cards.c b/drivers/media/video/cx18/cx18-cards.c index 3cb9734..5efe01e 100644 --- a/drivers/media/video/cx18/cx18-cards.c +++ b/drivers/media/video/cx18/cx18-cards.c @@ -292,12 +292,111 @@ static const struct cx18_card cx18_card_cnxt_raptor_pal = { /* ------------------------------------------------------------------------- */ +/* Toshiba Qosmio laptop internal DVB-T/Analog Hybrid Tuner */ + +static const struct cx18_card_pci_info cx18_pci_toshiba_qosmio_dvbt[] = { + { PCI_DEVICE_ID_CX23418, CX18_PCI_ID_TOSHIBA, 0x0110 }, + { 0, 0, 0 } +}; + +static const struct cx18_card cx18_card_toshiba_qosmio_dvbt = { + .type = CX18_CARD_TOSHIBA_QOSMIO_DVBT, + .name = "Toshiba Qosmio DVB-T/Analog", + .comment = "Experimenters and photos needed for device to work well.\n" + "\tTo help, mail the ivtv-devel list (www.ivtvdriver.org).\n", + .v4l2_capabilities = CX18_CAP_ENCODER, + .hw_audio_ctrl = CX18_HW_CX23418, + .hw_all = CX18_HW_TUNER, + .video_inputs = { + { CX18_CARD_INPUT_VID_TUNER, 0, CX18_AV_COMPOSITE6 }, + { CX18_CARD_INPUT_SVIDEO1, 1, + CX18_AV_SVIDEO_LUMA3 | CX18_AV_SVIDEO_CHROMA4 }, + { CX18_CARD_INPUT_COMPOSITE1, 1, CX18_AV_COMPOSITE1 }, + }, + .audio_inputs = { + { CX18_CARD_INPUT_AUD_TUNER, CX18_AV_AUDIO5, 0 }, + { CX18_CARD_INPUT_LINE_IN1, CX18_AV_AUDIO_SERIAL1, 1 }, + }, + .tuners = { + { .std = V4L2_STD_ALL, .tuner = TUNER_XC2028 }, + }, + .ddr = { + .chip_config = 0x202, + .refresh = 0x3bb, + .timing1 = 0x33320a63, + .timing2 = 0x0a, + .tune_lane = 0, + .initial_emrs = 0x42, + }, + .xceive_pin = 15, + .pci_list = cx18_pci_toshiba_qosmio_dvbt, + .i2c = &cx18_i2c_std, +}; + +/* ------------------------------------------------------------------------- */ + +/* Leadtek WinFast PVR2100 */ + +static const struct cx18_card_pci_info cx18_pci_leadtek_pvr2100[] = { + { PCI_DEVICE_ID_CX23418, CX18_PCI_ID_LEADTEK, 0x6f27 }, + { 0, 0, 0 } +}; + +static const struct cx18_card cx18_card_leadtek_pvr2100 = { + .type = CX18_CARD_LEADTEK_PVR2100, + .name = "Leadtek WinFast PVR2100", + .comment = "Experimenters and photos needed for device to work well.\n" + "\tTo help, mail the ivtv-devel list (www.ivtvdriver.org).\n", + .v4l2_capabilities = CX18_CAP_ENCODER, + .hw_audio_ctrl = CX18_HW_CX23418, + .hw_muxer = CX18_HW_GPIO, + .hw_all = CX18_HW_TUNER | CX18_HW_GPIO, + .video_inputs = { + { CX18_CARD_INPUT_VID_TUNER, 0, CX18_AV_COMPOSITE2 }, + { CX18_CARD_INPUT_SVIDEO1, 1, + CX18_AV_SVIDEO_LUMA3 | CX18_AV_SVIDEO_CHROMA4 }, + { CX18_CARD_INPUT_COMPOSITE1, 1, CX18_AV_COMPOSITE7 }, + }, + .audio_inputs = { + { CX18_CARD_INPUT_AUD_TUNER, CX18_AV_AUDIO5, 0 }, + { CX18_CARD_INPUT_LINE_IN1, CX18_AV_AUDIO_SERIAL1, 1 }, + }, + .tuners = { + /* XC3028 tuner */ + { .std = V4L2_STD_ALL, .tuner = TUNER_XC2028 }, + }, + .radio_input = { CX18_CARD_INPUT_AUD_TUNER, CX18_AV_AUDIO5, 2 }, + .ddr = { + /* + * Pointer to proper DDR config values provided by + * Terry Wu + */ + .chip_config = 0x303, + .refresh = 0x3bb, + .timing1 = 0x24220e83, + .timing2 = 0x1f, + .tune_lane = 0, + .initial_emrs = 0x2, + }, + .gpio_init.initial_value = 0x6, + .gpio_init.direction = 0x7, + .gpio_audio_input = { .mask = 0x7, + .tuner = 0x6, .linein = 0x2, .radio = 0x2 }, + .xceive_pin = 15, + .pci_list = cx18_pci_leadtek_pvr2100, + .i2c = &cx18_i2c_std, +}; + +/* ------------------------------------------------------------------------- */ + static const struct cx18_card *cx18_card_list[] = { &cx18_card_hvr1600_esmt, &cx18_card_hvr1600_samsung, &cx18_card_h900, &cx18_card_mpc718, &cx18_card_cnxt_raptor_pal, + &cx18_card_toshiba_qosmio_dvbt, + &cx18_card_leadtek_pvr2100, }; const struct cx18_card *cx18_get_card(u16 index) diff --git a/drivers/media/video/cx18/cx18-driver.c b/drivers/media/video/cx18/cx18-driver.c index df55317..6bf9ac8 100644 --- a/drivers/media/video/cx18/cx18-driver.c +++ b/drivers/media/video/cx18/cx18-driver.c @@ -130,6 +130,8 @@ MODULE_PARM_DESC(cardtype, "\t\t\t 3 = Compro VideoMate H900\n" "\t\t\t 4 = Yuan MPC718\n" "\t\t\t 5 = Conexant Raptor PAL/SECAM\n" + "\t\t\t 6 = Toshiba Qosmio DVB-T/Analog\n" + "\t\t\t 7 = Leadtek WinFast PVR2100\n" "\t\t\t 0 = Autodetect (default)\n" "\t\t\t-1 = Ignore this card\n\t\t"); MODULE_PARM_DESC(pal, "Set PAL standard: B, G, H, D, K, I, M, N, Nc, 60"); diff --git a/drivers/media/video/cx18/cx18-driver.h b/drivers/media/video/cx18/cx18-driver.h index 80f5f56..fa8be07 100644 --- a/drivers/media/video/cx18/cx18-driver.h +++ b/drivers/media/video/cx18/cx18-driver.h @@ -79,7 +79,9 @@ #define CX18_CARD_COMPRO_H900 2 /* Compro VideoMate H900 */ #define CX18_CARD_YUAN_MPC718 3 /* Yuan MPC718 */ #define CX18_CARD_CNXT_RAPTOR_PAL 4 /* Conexant Raptor PAL */ -#define CX18_CARD_LAST 4 +#define CX18_CARD_TOSHIBA_QOSMIO_DVBT 5 /* Toshiba Qosmio Interal DVB-T/Analog*/ +#define CX18_CARD_LEADTEK_PVR2100 6 /* Leadtek WinFast PVR2100 */ +#define CX18_CARD_LAST 6 #define CX18_ENC_STREAM_TYPE_MPG 0 #define CX18_ENC_STREAM_TYPE_TS 1 @@ -99,6 +101,8 @@ #define CX18_PCI_ID_COMPRO 0x185b #define CX18_PCI_ID_YUAN 0x12ab #define CX18_PCI_ID_CONEXANT 0x14f1 +#define CX18_PCI_ID_TOSHIBA 0x1179 +#define CX18_PCI_ID_LEADTEK 0x107D /* ======================================================================== */ /* ========================== START USER SETTABLE DMA VARIABLES =========== */ -- cgit v0.10.2 From e86a93dc3c870c412592c1f298c1425d80c58c6e Mon Sep 17 00:00:00 2001 From: Andy Walls Date: Sat, 4 Oct 2008 19:09:41 -0300 Subject: V4L/DVB (9132): cx18: Fix warning message for DMA done notification for inactive stream. cx18: Fix warning message for DMA done notification for inactive stream. The warning message would always gripe that the radio stream was to blame, which was misleading and wrong (/dev/radioN nodes never transfer data). Signed-off-by: Andy Walls Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/cx18/cx18-irq.c b/drivers/media/video/cx18/cx18-irq.c index 55a50a2..360330f 100644 --- a/drivers/media/video/cx18/cx18-irq.c +++ b/drivers/media/video/cx18/cx18-irq.c @@ -49,8 +49,8 @@ static void epu_dma_done(struct cx18 *cx, struct cx18_mailbox *mb) break; } if (i == CX18_MAX_STREAMS) { - CX18_WARN("DMA done for unknown handle %d for stream %s\n", - handle, s->name); + CX18_WARN("Got DMA done notification for unknown/inactive" + " handle %d\n", handle); mb->error = CXERR_NOT_OPEN; mb->cmd = 0; cx18_mb_ack(cx, mb); -- cgit v0.10.2 From dd89601d47e2eeab7c17b25f2549444751bcffe4 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Sat, 4 Oct 2008 08:36:54 -0300 Subject: V4L/DVB (9133): v4l: disconnect kernel number from minor The v4l core creates four different video devices (video, vbi, radio, vtx) and each has its own range of minor numbers. However, modern devices keep increasing the number of devices that they need so a maximum of 64 video devices will not be enough in the future. In addition this scheme makes it very hard to add new device types. This patch disconnects the kernel number allocation (e.g. video0, video1, etc.) from the actual minor number (just pick the first free minor). This allows for much more flexibility in the future. However, it does require the use of udev. For those who cannot use udev a new CONFIG option was created that changes the allocation scheme back to the old behavior. Thanks to Greg KH for suggesting this approach during the 2008 LPC. In addition, several bugs were fixed in the ivtv and cx18 drivers: these drivers try to allocate specific kernel numbers but that scheme contained a bug which caused what should have been e.g. video17 to appear as e.g. video2. Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig index e28e292..2dce16f 100644 --- a/drivers/media/video/Kconfig +++ b/drivers/media/video/Kconfig @@ -72,6 +72,15 @@ config VIDEO_ADV_DEBUG V4L devices. In doubt, say N. +config VIDEO_FIXED_MINOR_RANGES + bool "Enable old-style fixed minor ranges for video devices" + default n + ---help--- + Say Y here to enable the old-style fixed-range minor assignments. + Only useful if you rely on the old behavior and use mknod instead of udev. + + When in doubt, say N. + config VIDEO_HELPER_CHIPS_AUTO bool "Autoselect pertinent encoders/decoders and other helper chips" default y diff --git a/drivers/media/video/cx18/cx18-driver.c b/drivers/media/video/cx18/cx18-driver.c index 6bf9ac8..085121c 100644 --- a/drivers/media/video/cx18/cx18-driver.c +++ b/drivers/media/video/cx18/cx18-driver.c @@ -175,7 +175,7 @@ MODULE_PARM_DESC(enc_pcm_buffers, "Encoder PCM buffers (in MB)\n" "\t\t\tDefault: " __stringify(CX18_DEFAULT_ENC_PCM_BUFFERS)); -MODULE_PARM_DESC(cx18_first_minor, "Set minor assigned to first card"); +MODULE_PARM_DESC(cx18_first_minor, "Set kernel number assigned to first card"); MODULE_AUTHOR("Hans Verkuil"); MODULE_DESCRIPTION("CX23418 driver"); @@ -959,7 +959,7 @@ static int module_start(void) /* Validate parameters */ if (cx18_first_minor < 0 || cx18_first_minor >= CX18_MAX_CARDS) { - printk(KERN_ERR "cx18: Exiting, ivtv_first_minor must be between 0 and %d\n", + printk(KERN_ERR "cx18: Exiting, cx18_first_minor must be between 0 and %d\n", CX18_MAX_CARDS - 1); return -1; } diff --git a/drivers/media/video/cx18/cx18-streams.c b/drivers/media/video/cx18/cx18-streams.c index c752a6a..0c8e754 100644 --- a/drivers/media/video/cx18/cx18-streams.c +++ b/drivers/media/video/cx18/cx18-streams.c @@ -57,7 +57,7 @@ static struct file_operations cx18_v4l2_enc_fops = { static struct { const char *name; int vfl_type; - int minor_offset; + int num_offset; int dma; enum v4l2_buf_type buf_type; struct file_operations *fops; @@ -144,8 +144,8 @@ static int cx18_prep_dev(struct cx18 *cx, int type) { struct cx18_stream *s = &cx->streams[type]; u32 cap = cx->v4l2_cap; - int minor_offset = cx18_stream_info[type].minor_offset; - int minor; + int num_offset = cx18_stream_info[type].num_offset; + int num = cx->num + cx18_first_minor + num_offset; /* These four fields are always initialized. If v4l2dev == NULL, then this stream is not in use. In that case no other fields but these @@ -164,9 +164,6 @@ static int cx18_prep_dev(struct cx18 *cx, int type) !(cap & (V4L2_CAP_VBI_CAPTURE | V4L2_CAP_SLICED_VBI_CAPTURE))) return 0; - /* card number + user defined offset + device offset */ - minor = cx->num + cx18_first_minor + minor_offset; - /* User explicitly selected 0 buffers for these streams, so don't create them. */ if (cx18_stream_info[type].dma != PCI_DMA_NONE && @@ -177,7 +174,7 @@ static int cx18_prep_dev(struct cx18 *cx, int type) cx18_stream_init(cx, type); - if (minor_offset == -1) + if (num_offset == -1) return 0; /* allocate and initialize the v4l2 video device structure */ @@ -191,7 +188,7 @@ static int cx18_prep_dev(struct cx18 *cx, int type) snprintf(s->v4l2dev->name, sizeof(s->v4l2dev->name), "cx18-%d", cx->num); - s->v4l2dev->minor = minor; + s->v4l2dev->num = num; s->v4l2dev->parent = &cx->dev->dev; s->v4l2dev->fops = cx18_stream_info[type].fops; s->v4l2dev->release = video_device_release; @@ -227,7 +224,7 @@ static int cx18_reg_dev(struct cx18 *cx, int type) { struct cx18_stream *s = &cx->streams[type]; int vfl_type = cx18_stream_info[type].vfl_type; - int minor; + int num; /* TODO: Shouldn't this be a VFL_TYPE_TRANSPORT or something? * We need a VFL_TYPE_TS defined. @@ -245,38 +242,44 @@ static int cx18_reg_dev(struct cx18 *cx, int type) if (s->v4l2dev == NULL) return 0; - minor = s->v4l2dev->minor; + num = s->v4l2dev->num; + /* card number + user defined offset + device offset */ + if (type != CX18_ENC_STREAM_TYPE_MPG) { + struct cx18_stream *s_mpg = &cx->streams[CX18_ENC_STREAM_TYPE_MPG]; + + if (s_mpg->v4l2dev) + num = s_mpg->v4l2dev->num + cx18_stream_info[type].num_offset; + } /* Register device. First try the desired minor, then any free one. */ - if (video_register_device(s->v4l2dev, vfl_type, minor) && - video_register_device(s->v4l2dev, vfl_type, -1)) { - CX18_ERR("Couldn't register v4l2 device for %s minor %d\n", - s->name, minor); + if (video_register_device(s->v4l2dev, vfl_type, num)) { + CX18_ERR("Couldn't register v4l2 device for %s kernel number %d\n", + s->name, num); video_device_release(s->v4l2dev); s->v4l2dev = NULL; return -ENOMEM; } - minor = s->v4l2dev->minor; + num = s->v4l2dev->num; switch (vfl_type) { case VFL_TYPE_GRABBER: CX18_INFO("Registered device video%d for %s (%d MB)\n", - minor, s->name, cx->options.megabytes[type]); + num, s->name, cx->options.megabytes[type]); break; case VFL_TYPE_RADIO: CX18_INFO("Registered device radio%d for %s\n", - minor - MINOR_VFL_TYPE_RADIO_MIN, s->name); + num, s->name); break; case VFL_TYPE_VBI: if (cx->options.megabytes[type]) CX18_INFO("Registered device vbi%d for %s (%d MB)\n", - minor - MINOR_VFL_TYPE_VBI_MIN, + num, s->name, cx->options.megabytes[type]); else CX18_INFO("Registered device vbi%d for %s\n", - minor - MINOR_VFL_TYPE_VBI_MIN, s->name); + num, s->name); break; } diff --git a/drivers/media/video/em28xx/em28xx-video.c b/drivers/media/video/em28xx/em28xx-video.c index 50d2c7a..c53649e 100644 --- a/drivers/media/video/em28xx/em28xx-video.c +++ b/drivers/media/video/em28xx/em28xx-video.c @@ -1600,8 +1600,7 @@ static void em28xx_release_resources(struct em28xx *dev) /*FIXME: I2C IR should be disconnected */ em28xx_info("V4L2 devices /dev/video%d and /dev/vbi%d deregistered\n", - dev->vdev->minor-MINOR_VFL_TYPE_GRABBER_MIN, - dev->vbi_dev->minor-MINOR_VFL_TYPE_VBI_MIN); + dev->vdev->num, dev->vbi_dev->num); list_del(&dev->devlist); if (dev->sbutton_input_dev) em28xx_deregister_snapshot_button(dev); @@ -2073,8 +2072,7 @@ static int em28xx_init_dev(struct em28xx **devhandle, struct usb_device *udev, video_mux(dev, 0); em28xx_info("V4L2 device registered as /dev/video%d and /dev/vbi%d\n", - dev->vdev->minor-MINOR_VFL_TYPE_GRABBER_MIN, - dev->vbi_dev->minor-MINOR_VFL_TYPE_VBI_MIN); + dev->vdev->num, dev->vbi_dev->num); mutex_lock(&em28xx_extension_devlist_lock); if (!list_empty(&em28xx_extension_devlist)) { @@ -2274,7 +2272,7 @@ static void em28xx_usb_disconnect(struct usb_interface *interface) em28xx_warn ("device /dev/video%d is open! Deregistration and memory " "deallocation are deferred on close.\n", - dev->vdev->minor-MINOR_VFL_TYPE_GRABBER_MIN); + dev->vdev->num); dev->state |= DEV_MISCONFIGURED; em28xx_uninit_isoc(dev); diff --git a/drivers/media/video/ivtv/ivtv-driver.c b/drivers/media/video/ivtv/ivtv-driver.c index 6b04930..7aa61b6 100644 --- a/drivers/media/video/ivtv/ivtv-driver.c +++ b/drivers/media/video/ivtv/ivtv-driver.c @@ -61,14 +61,14 @@ #include "tuner-xc2028.h" /* var to keep track of the number of array elements in use */ -int ivtv_cards_active = 0; +int ivtv_cards_active; /* If you have already X v4l cards, then set this to X. This way the device numbers stay matched. Example: you have a WinTV card without radio and a PVR-350 with. Normally this would give a video1 device together with a radio0 device for the PVR. By setting this to 1 you ensure that radio0 is now also radio1. */ -int ivtv_first_minor = 0; +int ivtv_first_minor; /* Master variable for all ivtv info */ struct ivtv *ivtv_cards[IVTV_MAX_CARDS]; @@ -251,7 +251,7 @@ MODULE_PARM_DESC(newi2c, "\t\t\t-1 is autodetect, 0 is off, 1 is on\n" "\t\t\tDefault is autodetect"); -MODULE_PARM_DESC(ivtv_first_minor, "Set minor assigned to first card"); +MODULE_PARM_DESC(ivtv_first_minor, "Set kernel number assigned to first card"); MODULE_AUTHOR("Kevin Thayer, Chris Kennedy, Hans Verkuil"); MODULE_DESCRIPTION("CX23415/CX23416 driver"); diff --git a/drivers/media/video/ivtv/ivtv-streams.c b/drivers/media/video/ivtv/ivtv-streams.c index 730e85d..24273fb 100644 --- a/drivers/media/video/ivtv/ivtv-streams.c +++ b/drivers/media/video/ivtv/ivtv-streams.c @@ -75,7 +75,7 @@ static const struct file_operations ivtv_v4l2_dec_fops = { static struct { const char *name; int vfl_type; - int minor_offset; + int num_offset; int dma, pio; enum v4l2_buf_type buf_type; const struct file_operations *fops; @@ -171,8 +171,8 @@ static void ivtv_stream_init(struct ivtv *itv, int type) static int ivtv_prep_dev(struct ivtv *itv, int type) { struct ivtv_stream *s = &itv->streams[type]; - int minor_offset = ivtv_stream_info[type].minor_offset; - int minor; + int num_offset = ivtv_stream_info[type].num_offset; + int num = itv->num + ivtv_first_minor + num_offset; /* These four fields are always initialized. If v4l2dev == NULL, then this stream is not in use. In that case no other fields but these @@ -188,9 +188,6 @@ static int ivtv_prep_dev(struct ivtv *itv, int type) if (type >= IVTV_DEC_STREAM_TYPE_MPG && !(itv->v4l2_cap & V4L2_CAP_VIDEO_OUTPUT)) return 0; - /* card number + user defined offset + device offset */ - minor = itv->num + ivtv_first_minor + minor_offset; - /* User explicitly selected 0 buffers for these streams, so don't create them. */ if (ivtv_stream_info[type].dma != PCI_DMA_NONE && @@ -211,7 +208,7 @@ static int ivtv_prep_dev(struct ivtv *itv, int type) snprintf(s->v4l2dev->name, sizeof(s->v4l2dev->name), "ivtv%d %s", itv->num, s->name); - s->v4l2dev->minor = minor; + s->v4l2dev->num = num; s->v4l2dev->parent = &itv->dev->dev; s->v4l2dev->fops = ivtv_stream_info[type].fops; s->v4l2dev->release = video_device_release; @@ -250,39 +247,46 @@ static int ivtv_reg_dev(struct ivtv *itv, int type) { struct ivtv_stream *s = &itv->streams[type]; int vfl_type = ivtv_stream_info[type].vfl_type; - int minor; + int num; if (s->v4l2dev == NULL) return 0; - minor = s->v4l2dev->minor; + num = s->v4l2dev->num; + /* card number + user defined offset + device offset */ + if (type != IVTV_ENC_STREAM_TYPE_MPG) { + struct ivtv_stream *s_mpg = &itv->streams[IVTV_ENC_STREAM_TYPE_MPG]; + + if (s_mpg->v4l2dev) + num = s_mpg->v4l2dev->num + ivtv_stream_info[type].num_offset; + } + /* Register device. First try the desired minor, then any free one. */ - if (video_register_device(s->v4l2dev, vfl_type, minor) && - video_register_device(s->v4l2dev, vfl_type, -1)) { - IVTV_ERR("Couldn't register v4l2 device for %s minor %d\n", - s->name, minor); + if (video_register_device(s->v4l2dev, vfl_type, num)) { + IVTV_ERR("Couldn't register v4l2 device for %s kernel number %d\n", + s->name, num); video_device_release(s->v4l2dev); s->v4l2dev = NULL; return -ENOMEM; } + num = s->v4l2dev->num; switch (vfl_type) { case VFL_TYPE_GRABBER: IVTV_INFO("Registered device video%d for %s (%d kB)\n", - s->v4l2dev->minor, s->name, itv->options.kilobytes[type]); + num, s->name, itv->options.kilobytes[type]); break; case VFL_TYPE_RADIO: IVTV_INFO("Registered device radio%d for %s\n", - s->v4l2dev->minor - MINOR_VFL_TYPE_RADIO_MIN, s->name); + num, s->name); break; case VFL_TYPE_VBI: if (itv->options.kilobytes[type]) IVTV_INFO("Registered device vbi%d for %s (%d kB)\n", - s->v4l2dev->minor - MINOR_VFL_TYPE_VBI_MIN, - s->name, itv->options.kilobytes[type]); + num, s->name, itv->options.kilobytes[type]); else IVTV_INFO("Registered device vbi%d for %s\n", - s->v4l2dev->minor - MINOR_VFL_TYPE_VBI_MIN, s->name); + num, s->name); break; } return 0; diff --git a/drivers/media/video/v4l2-dev.c b/drivers/media/video/v4l2-dev.c index 7addf2f..ccd6566 100644 --- a/drivers/media/video/v4l2-dev.c +++ b/drivers/media/video/v4l2-dev.c @@ -65,6 +65,7 @@ static struct device_attribute video_device_attrs[] = { */ static struct video_device *video_device[VIDEO_NUM_DEVICES]; static DEFINE_MUTEX(videodev_lock); +static DECLARE_BITMAP(video_nums[VFL_TYPE_MAX], VIDEO_NUM_DEVICES); struct video_device *video_device_alloc(void) { @@ -99,6 +100,7 @@ static void v4l2_chardev_release(struct kobject *kobj) /* Free up this device for reuse */ video_device[vfd->minor] = NULL; + clear_bit(vfd->num, video_nums[vfd->vfl_type]); mutex_unlock(&videodev_lock); /* Release the character device */ @@ -217,10 +219,10 @@ int video_register_device_index(struct video_device *vfd, int type, int nr, int index) { int i = 0; - int base; - int end; int ret; - char *name_base; + int minor_offset = 0; + int minor_cnt = VIDEO_NUM_DEVICES; + const char *name_base; void *priv = video_get_drvdata(vfd); /* the release callback MUST be present */ @@ -231,23 +233,15 @@ int video_register_device_index(struct video_device *vfd, int type, int nr, switch (type) { case VFL_TYPE_GRABBER: - base = MINOR_VFL_TYPE_GRABBER_MIN; - end = MINOR_VFL_TYPE_GRABBER_MAX+1; name_base = "video"; break; case VFL_TYPE_VTX: - base = MINOR_VFL_TYPE_VTX_MIN; - end = MINOR_VFL_TYPE_VTX_MAX+1; name_base = "vtx"; break; case VFL_TYPE_VBI: - base = MINOR_VFL_TYPE_VBI_MIN; - end = MINOR_VFL_TYPE_VBI_MAX+1; name_base = "vbi"; break; case VFL_TYPE_RADIO: - base = MINOR_VFL_TYPE_RADIO_MIN; - end = MINOR_VFL_TYPE_RADIO_MAX+1; name_base = "radio"; break; default: @@ -256,31 +250,70 @@ int video_register_device_index(struct video_device *vfd, int type, int nr, return -EINVAL; } + vfd->vfl_type = type; + +#ifdef CONFIG_VIDEO_FIXED_MINOR_RANGES + /* Keep the ranges for the first four types for historical + * reasons. + * Newer devices (not yet in place) should use the range + * of 128-191 and just pick the first free minor there + * (new style). */ + switch (type) { + case VFL_TYPE_GRABBER: + minor_offset = 0; + minor_cnt = 64; + break; + case VFL_TYPE_RADIO: + minor_offset = 64; + minor_cnt = 64; + break; + case VFL_TYPE_VTX: + minor_offset = 192; + minor_cnt = 32; + break; + case VFL_TYPE_VBI: + minor_offset = 224; + minor_cnt = 32; + break; + default: + minor_offset = 128; + minor_cnt = 64; + break; + } +#endif + /* Initialize the character device */ cdev_init(&vfd->cdev, vfd->fops); vfd->cdev.owner = vfd->fops->owner; /* pick a minor number */ mutex_lock(&videodev_lock); - if (nr >= 0 && nr < end-base) { - /* use the one the driver asked for */ - i = base + nr; - if (NULL != video_device[i]) { - mutex_unlock(&videodev_lock); - return -ENFILE; - } - } else { - /* use first free */ - for (i = base; i < end; i++) - if (NULL == video_device[i]) - break; - if (i == end) { - mutex_unlock(&videodev_lock); - return -ENFILE; - } + nr = find_next_zero_bit(video_nums[type], minor_cnt, nr == -1 ? 0 : nr); + if (nr == minor_cnt) + nr = find_first_zero_bit(video_nums[type], minor_cnt); + if (nr == minor_cnt) { + printk(KERN_ERR "could not get a free kernel number\n"); + mutex_unlock(&videodev_lock); + return -ENFILE; } - video_device[i] = vfd; - vfd->vfl_type = type; - vfd->minor = i; +#ifdef CONFIG_VIDEO_FIXED_MINOR_RANGES + /* 1-on-1 mapping of kernel number to minor number */ + i = nr; +#else + /* The kernel number and minor numbers are independent */ + for (i = 0; i < VIDEO_NUM_DEVICES; i++) + if (video_device[i] == NULL) + break; + if (i == VIDEO_NUM_DEVICES) { + mutex_unlock(&videodev_lock); + printk(KERN_ERR "could not get a free minor\n"); + return -ENFILE; + } +#endif + vfd->minor = i + minor_offset; + vfd->num = nr; + set_bit(nr, video_nums[type]); + BUG_ON(video_device[vfd->minor]); + video_device[vfd->minor] = vfd; ret = get_index(vfd, index); vfd->index = ret; @@ -306,7 +339,7 @@ int video_register_device_index(struct video_device *vfd, int type, int nr, vfd->dev.devt = MKDEV(VIDEO_MAJOR, vfd->minor); if (vfd->parent) vfd->dev.parent = vfd->parent; - sprintf(vfd->dev.bus_id, "%s%d", name_base, i - base); + sprintf(vfd->dev.bus_id, "%s%d", name_base, nr); ret = device_register(&vfd->dev); if (ret < 0) { printk(KERN_ERR "%s: device_register failed\n", __func__); @@ -324,6 +357,7 @@ del_cdev: fail_minor: mutex_lock(&videodev_lock); video_device[vfd->minor] = NULL; + clear_bit(vfd->num, video_nums[type]); mutex_unlock(&videodev_lock); vfd->minor = -1; return ret; diff --git a/include/media/v4l2-dev.h b/include/media/v4l2-dev.h index d129b56..a0a6b41 100644 --- a/include/media/v4l2-dev.h +++ b/include/media/v4l2-dev.h @@ -18,20 +18,11 @@ #define VIDEO_MAJOR 81 -/* Minor device allocation */ -#define MINOR_VFL_TYPE_GRABBER_MIN 0 -#define MINOR_VFL_TYPE_GRABBER_MAX 63 -#define MINOR_VFL_TYPE_RADIO_MIN 64 -#define MINOR_VFL_TYPE_RADIO_MAX 127 -#define MINOR_VFL_TYPE_VTX_MIN 192 -#define MINOR_VFL_TYPE_VTX_MAX 223 -#define MINOR_VFL_TYPE_VBI_MIN 224 -#define MINOR_VFL_TYPE_VBI_MAX 255 - #define VFL_TYPE_GRABBER 0 #define VFL_TYPE_VBI 1 #define VFL_TYPE_RADIO 2 #define VFL_TYPE_VTX 3 +#define VFL_TYPE_MAX 4 struct v4l2_ioctl_callbacks; @@ -56,6 +47,7 @@ struct video_device char name[32]; int vfl_type; int minor; + u16 num; /* attribute to differentiate multiple indices on one physical device */ int index; -- cgit v0.10.2 From 19c309e383610453604092473287f77233f31e90 Mon Sep 17 00:00:00 2001 From: Tim Farrington Date: Sat, 11 Oct 2008 12:44:38 -0300 Subject: V4L/DVB (9135): cx88 Dvico FusionHDTV Pro Well, one thing you encouraged me to do was re-test some of my cards which contained the xc3028-zarlink combo. Which led me to test a Dvico FusionHDTV Pro. Almost a year ago, Chris Pascoe did a patch for this which can be found at his ~pascoe/xc-test at Linuxtv. This worked very well, however that was using his version of firmware. Alas, someone attempted to use this and patch v4l-dvb, and messed it up. So I've fixed it. I enclose the patch against today's tree (containing your latest tuner-xc2028.c patch). The card now works very well, well with DVB-T anyway. Signed-off-by: Tim Farrington Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/cx88/cx88-cards.c b/drivers/media/video/cx88/cx88-cards.c index 369ba69..a9e52de 100644 --- a/drivers/media/video/cx88/cx88-cards.c +++ b/drivers/media/video/cx88/cx88-cards.c @@ -1581,9 +1581,9 @@ static const struct cx88_board cx88_boards[] = { }, [CX88_BOARD_DVICO_FUSIONHDTV_DVB_T_PRO] = { .name = "DViCO FusionHDTV DVB-T PRO", - .tuner_type = TUNER_ABSENT, /* XXX: Has XC3028 */ + .tuner_type = TUNER_XC2028, + .tuner_addr = 0x61, .radio_type = UNSET, - .tuner_addr = ADDR_UNSET, .radio_addr = ADDR_UNSET, .input = { { .type = CX88_VMUX_COMPOSITE1, @@ -2671,7 +2671,7 @@ void cx88_setup_xc3028(struct cx88_core *core, struct xc2028_ctrl *ctl) core->i2c_algo.udelay = 16; break; case CX88_BOARD_DVICO_FUSIONHDTV_DVB_T_PRO: - ctl->scode_table = XC3028_FE_ZARLINK456; + ctl->demod = XC3028_FE_ZARLINK456; break; case CX88_BOARD_KWORLD_ATSC_120: case CX88_BOARD_DVICO_FUSIONHDTV_5_PCI_NANO: -- cgit v0.10.2 From 45d011031d745d2c9a21c21d289428cb7f88a2d0 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Thu, 9 Oct 2008 05:51:22 -0300 Subject: V4L/DVB (9129): zoran: move zoran sources into a zoran subdirectory Prevent the zoran driver sources from cluttering the video directory. This changeset only moves the drivers and it does not fix any of the checkpatch warnings/errors to keep the changeset clean. Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig index 2dce16f..47102c2 100644 --- a/drivers/media/video/Kconfig +++ b/drivers/media/video/Kconfig @@ -605,79 +605,7 @@ config VIDEO_STRADIS driver for PCI. There is a product page at . -config VIDEO_ZORAN - tristate "Zoran ZR36057/36067 Video For Linux" - depends on PCI && I2C_ALGOBIT && VIDEO_V4L1 && VIRT_TO_BUS - help - Say Y for support for MJPEG capture cards based on the Zoran - 36057/36067 PCI controller chipset. This includes the Iomega - Buz, Pinnacle DC10+ and the Linux Media Labs LML33. There is - a driver homepage at . For - more information, check . - - To compile this driver as a module, choose M here: the - module will be called zr36067. - -config VIDEO_ZORAN_DC30 - tristate "Pinnacle/Miro DC30(+) support" - depends on VIDEO_ZORAN - select VIDEO_ADV7175 if VIDEO_HELPER_CHIPS_AUTO - select VIDEO_VPX3220 if VIDEO_HELPER_CHIPS_AUTO - help - Support for the Pinnacle/Miro DC30(+) MJPEG capture/playback - card. This also supports really old DC10 cards based on the - zr36050 MJPEG codec and zr36016 VFE. - -config VIDEO_ZORAN_ZR36060 - tristate "Zoran ZR36060" - depends on VIDEO_ZORAN - help - Say Y to support Zoran boards based on 36060 chips. - This includes Iomega Buz, Pinnacle DC10, Linux media Labs 33 - and 33 R10 and AverMedia 6 boards. - -config VIDEO_ZORAN_BUZ - tristate "Iomega Buz support" - depends on VIDEO_ZORAN_ZR36060 - select VIDEO_SAA7111 if VIDEO_HELPER_CHIPS_AUTO - select VIDEO_SAA7185 if VIDEO_HELPER_CHIPS_AUTO - help - Support for the Iomega Buz MJPEG capture/playback card. - -config VIDEO_ZORAN_DC10 - tristate "Pinnacle/Miro DC10(+) support" - depends on VIDEO_ZORAN_ZR36060 - select VIDEO_SAA7110 if VIDEO_HELPER_CHIPS_AUTO - select VIDEO_ADV7175 if VIDEO_HELPER_CHIPS_AUTO - help - Support for the Pinnacle/Miro DC10(+) MJPEG capture/playback - card. - -config VIDEO_ZORAN_LML33 - tristate "Linux Media Labs LML33 support" - depends on VIDEO_ZORAN_ZR36060 - select VIDEO_BT819 if VIDEO_HELPER_CHIPS_AUTO - select VIDEO_BT856 if VIDEO_HELPER_CHIPS_AUTO - help - Support for the Linux Media Labs LML33 MJPEG capture/playback - card. - -config VIDEO_ZORAN_LML33R10 - tristate "Linux Media Labs LML33R10 support" - depends on VIDEO_ZORAN_ZR36060 - select VIDEO_SAA7114 if VIDEO_HELPER_CHIPS_AUTO - select VIDEO_ADV7170 if VIDEO_HELPER_CHIPS_AUTO - help - support for the Linux Media Labs LML33R10 MJPEG capture/playback - card. - -config VIDEO_ZORAN_AVS6EYES - tristate "AverMedia 6 Eyes support (EXPERIMENTAL)" - depends on VIDEO_ZORAN_ZR36060 && EXPERIMENTAL && VIDEO_V4L1 - select VIDEO_BT856 if VIDEO_HELPER_CHIPS_AUTO - select VIDEO_KS0127 if VIDEO_HELPER_CHIPS_AUTO - help - Support for the AverMedia 6 Eyes video surveillance card. +source "drivers/media/video/zoran/Kconfig" config VIDEO_MEYE tristate "Sony Vaio Picturebook Motion Eye Video For Linux" diff --git a/drivers/media/video/Makefile b/drivers/media/video/Makefile index 28e3257..16962f3 100644 --- a/drivers/media/video/Makefile +++ b/drivers/media/video/Makefile @@ -2,8 +2,6 @@ # Makefile for the video capture/playback device drivers. # -zr36067-objs := zoran_procfs.o zoran_device.o \ - zoran_driver.o zoran_card.o tuner-objs := tuner-core.o msp3400-objs := msp3400-driver.o msp3400-kthreads.o @@ -54,9 +52,7 @@ obj-$(CONFIG_VIDEO_BT856) += bt856.o obj-$(CONFIG_VIDEO_BT866) += bt866.o obj-$(CONFIG_VIDEO_KS0127) += ks0127.o -obj-$(CONFIG_VIDEO_ZORAN) += zr36067.o videocodec.o -obj-$(CONFIG_VIDEO_ZORAN_DC30) += zr36050.o zr36016.o -obj-$(CONFIG_VIDEO_ZORAN_ZR36060) += zr36060.o +obj-$(CONFIG_VIDEO_ZORAN) += zoran/ obj-$(CONFIG_VIDEO_PMS) += pms.o obj-$(CONFIG_VIDEO_VINO) += vino.o indycam.o diff --git a/drivers/media/video/videocodec.c b/drivers/media/video/videocodec.c deleted file mode 100644 index cf24956..0000000 --- a/drivers/media/video/videocodec.c +++ /dev/null @@ -1,408 +0,0 @@ -/* - * VIDEO MOTION CODECs internal API for video devices - * - * Interface for MJPEG (and maybe later MPEG/WAVELETS) codec's - * bound to a master device. - * - * (c) 2002 Wolfgang Scherr - * - * $Id: videocodec.c,v 1.1.2.8 2003/03/29 07:16:04 rbultje Exp $ - * - * ------------------------------------------------------------------------ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - * - * ------------------------------------------------------------------------ - */ - -#define VIDEOCODEC_VERSION "v0.2" - -#include -#include -#include -#include -#include - -// kernel config is here (procfs flag) - -#ifdef CONFIG_PROC_FS -#include -#include -#include -#endif - -#include "videocodec.h" - -static int debug; -module_param(debug, int, 0); -MODULE_PARM_DESC(debug, "Debug level (0-4)"); - -#define dprintk(num, format, args...) \ - do { \ - if (debug >= num) \ - printk(format, ##args); \ - } while (0) - -struct attached_list { - struct videocodec *codec; - struct attached_list *next; -}; - -struct codec_list { - const struct videocodec *codec; - int attached; - struct attached_list *list; - struct codec_list *next; -}; - -static struct codec_list *codeclist_top = NULL; - -/* ================================================= */ -/* function prototypes of the master/slave interface */ -/* ================================================= */ - -struct videocodec * -videocodec_attach (struct videocodec_master *master) -{ - struct codec_list *h = codeclist_top; - struct attached_list *a, *ptr; - struct videocodec *codec; - int res; - - if (!master) { - dprintk(1, KERN_ERR "videocodec_attach: no data\n"); - return NULL; - } - - dprintk(2, - "videocodec_attach: '%s', flags %lx, magic %lx\n", - master->name, master->flags, master->magic); - - if (!h) { - dprintk(1, - KERN_ERR - "videocodec_attach: no device available\n"); - return NULL; - } - - while (h) { - // attach only if the slave has at least the flags - // expected by the master - if ((master->flags & h->codec->flags) == master->flags) { - dprintk(4, "videocodec_attach: try '%s'\n", - h->codec->name); - - if (!try_module_get(h->codec->owner)) - return NULL; - - codec = - kmalloc(sizeof(struct videocodec), GFP_KERNEL); - if (!codec) { - dprintk(1, - KERN_ERR - "videocodec_attach: no mem\n"); - goto out_module_put; - } - memcpy(codec, h->codec, sizeof(struct videocodec)); - - snprintf(codec->name, sizeof(codec->name), - "%s[%d]", codec->name, h->attached); - codec->master_data = master; - res = codec->setup(codec); - if (res == 0) { - dprintk(3, "videocodec_attach '%s'\n", - codec->name); - ptr = kzalloc(sizeof(struct attached_list), GFP_KERNEL); - if (!ptr) { - dprintk(1, - KERN_ERR - "videocodec_attach: no memory\n"); - goto out_kfree; - } - ptr->codec = codec; - - a = h->list; - if (!a) { - h->list = ptr; - dprintk(4, - "videocodec: first element\n"); - } else { - while (a->next) - a = a->next; // find end - a->next = ptr; - dprintk(4, - "videocodec: in after '%s'\n", - h->codec->name); - } - - h->attached += 1; - return codec; - } else { - kfree(codec); - } - } - h = h->next; - } - - dprintk(1, KERN_ERR "videocodec_attach: no codec found!\n"); - return NULL; - - out_module_put: - module_put(h->codec->owner); - out_kfree: - kfree(codec); - return NULL; -} - -int -videocodec_detach (struct videocodec *codec) -{ - struct codec_list *h = codeclist_top; - struct attached_list *a, *prev; - int res; - - if (!codec) { - dprintk(1, KERN_ERR "videocodec_detach: no data\n"); - return -EINVAL; - } - - dprintk(2, - "videocodec_detach: '%s', type: %x, flags %lx, magic %lx\n", - codec->name, codec->type, codec->flags, codec->magic); - - if (!h) { - dprintk(1, - KERN_ERR "videocodec_detach: no device left...\n"); - return -ENXIO; - } - - while (h) { - a = h->list; - prev = NULL; - while (a) { - if (codec == a->codec) { - res = a->codec->unset(a->codec); - if (res >= 0) { - dprintk(3, - "videocodec_detach: '%s'\n", - a->codec->name); - a->codec->master_data = NULL; - } else { - dprintk(1, - KERN_ERR - "videocodec_detach: '%s'\n", - a->codec->name); - a->codec->master_data = NULL; - } - if (prev == NULL) { - h->list = a->next; - dprintk(4, - "videocodec: delete first\n"); - } else { - prev->next = a->next; - dprintk(4, - "videocodec: delete middle\n"); - } - module_put(a->codec->owner); - kfree(a->codec); - kfree(a); - h->attached -= 1; - return 0; - } - prev = a; - a = a->next; - } - h = h->next; - } - - dprintk(1, KERN_ERR "videocodec_detach: given codec not found!\n"); - return -EINVAL; -} - -int -videocodec_register (const struct videocodec *codec) -{ - struct codec_list *ptr, *h = codeclist_top; - - if (!codec) { - dprintk(1, KERN_ERR "videocodec_register: no data!\n"); - return -EINVAL; - } - - dprintk(2, - "videocodec: register '%s', type: %x, flags %lx, magic %lx\n", - codec->name, codec->type, codec->flags, codec->magic); - - ptr = kzalloc(sizeof(struct codec_list), GFP_KERNEL); - if (!ptr) { - dprintk(1, KERN_ERR "videocodec_register: no memory\n"); - return -ENOMEM; - } - ptr->codec = codec; - - if (!h) { - codeclist_top = ptr; - dprintk(4, "videocodec: hooked in as first element\n"); - } else { - while (h->next) - h = h->next; // find the end - h->next = ptr; - dprintk(4, "videocodec: hooked in after '%s'\n", - h->codec->name); - } - - return 0; -} - -int -videocodec_unregister (const struct videocodec *codec) -{ - struct codec_list *prev = NULL, *h = codeclist_top; - - if (!codec) { - dprintk(1, KERN_ERR "videocodec_unregister: no data!\n"); - return -EINVAL; - } - - dprintk(2, - "videocodec: unregister '%s', type: %x, flags %lx, magic %lx\n", - codec->name, codec->type, codec->flags, codec->magic); - - if (!h) { - dprintk(1, - KERN_ERR - "videocodec_unregister: no device left...\n"); - return -ENXIO; - } - - while (h) { - if (codec == h->codec) { - if (h->attached) { - dprintk(1, - KERN_ERR - "videocodec: '%s' is used\n", - h->codec->name); - return -EBUSY; - } - dprintk(3, "videocodec: unregister '%s' is ok.\n", - h->codec->name); - if (prev == NULL) { - codeclist_top = h->next; - dprintk(4, - "videocodec: delete first element\n"); - } else { - prev->next = h->next; - dprintk(4, - "videocodec: delete middle element\n"); - } - kfree(h); - return 0; - } - prev = h; - h = h->next; - } - - dprintk(1, - KERN_ERR - "videocodec_unregister: given codec not found!\n"); - return -EINVAL; -} - -#ifdef CONFIG_PROC_FS -static int proc_videocodecs_show(struct seq_file *m, void *v) -{ - struct codec_list *h = codeclist_top; - struct attached_list *a; - - seq_printf(m, "lave or attached aster name type flags magic "); - seq_printf(m, "(connected as)\n"); - - h = codeclist_top; - while (h) { - seq_printf(m, "S %32s %04x %08lx %08lx (TEMPLATE)\n", - h->codec->name, h->codec->type, - h->codec->flags, h->codec->magic); - a = h->list; - while (a) { - seq_printf(m, "M %32s %04x %08lx %08lx (%s)\n", - a->codec->master_data->name, - a->codec->master_data->type, - a->codec->master_data->flags, - a->codec->master_data->magic, - a->codec->name); - a = a->next; - } - h = h->next; - } - - return 0; -} - -static int proc_videocodecs_open(struct inode *inode, struct file *file) -{ - return single_open(file, proc_videocodecs_show, NULL); -} - -static const struct file_operations videocodecs_proc_fops = { - .owner = THIS_MODULE, - .open = proc_videocodecs_open, - .read = seq_read, - .llseek = seq_lseek, - .release = single_release, -}; -#endif - -/* ===================== */ -/* hook in driver module */ -/* ===================== */ -static int __init -videocodec_init (void) -{ -#ifdef CONFIG_PROC_FS - static struct proc_dir_entry *videocodec_proc_entry; -#endif - - printk(KERN_INFO "Linux video codec intermediate layer: %s\n", - VIDEOCODEC_VERSION); - -#ifdef CONFIG_PROC_FS - videocodec_proc_entry = proc_create("videocodecs", 0, NULL, &videocodecs_proc_fops); - if (!videocodec_proc_entry) { - dprintk(1, KERN_ERR "videocodec: can't init procfs.\n"); - } -#endif - return 0; -} - -static void __exit -videocodec_exit (void) -{ -#ifdef CONFIG_PROC_FS - remove_proc_entry("videocodecs", NULL); -#endif -} - -EXPORT_SYMBOL(videocodec_attach); -EXPORT_SYMBOL(videocodec_detach); -EXPORT_SYMBOL(videocodec_register); -EXPORT_SYMBOL(videocodec_unregister); - -module_init(videocodec_init); -module_exit(videocodec_exit); - -MODULE_AUTHOR("Wolfgang Scherr "); -MODULE_DESCRIPTION("Intermediate API module for video codecs " - VIDEOCODEC_VERSION); -MODULE_LICENSE("GPL"); diff --git a/drivers/media/video/videocodec.h b/drivers/media/video/videocodec.h deleted file mode 100644 index 97a3bbe..0000000 --- a/drivers/media/video/videocodec.h +++ /dev/null @@ -1,358 +0,0 @@ -/* - * VIDEO MOTION CODECs internal API for video devices - * - * Interface for MJPEG (and maybe later MPEG/WAVELETS) codec's - * bound to a master device. - * - * (c) 2002 Wolfgang Scherr - * - * $Id: videocodec.h,v 1.1.2.4 2003/01/14 21:15:03 rbultje Exp $ - * - * ------------------------------------------------------------------------ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - * - * ------------------------------------------------------------------------ - */ - -/* =================== */ -/* general description */ -/* =================== */ - -/* Should ease the (re-)usage of drivers supporting cards with (different) - video codecs. The codecs register to this module their functionality, - and the processors (masters) can attach to them if they fit. - - The codecs are typically have a "strong" binding to their master - so I - don't think it makes sense to have a full blown interfacing as with e.g. - i2c. If you have an other opinion, let's discuss & implement it :-))) - - Usage: - - The slave has just to setup the videocodec structure and use two functions: - videocodec_register(codecdata); - videocodec_unregister(codecdata); - The best is just calling them at module (de-)initialisation. - - The master sets up the structure videocodec_master and calls: - codecdata=videocodec_attach(master_codecdata); - videocodec_detach(codecdata); - - The slave is called during attach/detach via functions setup previously - during register. At that time, the master_data pointer is set up - and the slave can access any io registers of the master device (in the case - the slave is bound to it). Otherwise it doesn't need this functions and - therfor they may not be initialized. - - The other fuctions are just for convenience, as they are for sure used by - most/all of the codecs. The last ones may be ommited, too. - - See the structure declaration below for more information and which data has - to be set up for the master and the slave. - - ---------------------------------------------------------------------------- - The master should have "knowledge" of the slave and vice versa. So the data - structures sent to/from slave via set_data/get_data set_image/get_image are - device dependent and vary between MJPEG/MPEG/WAVELET/... devices. (!!!!) - ---------------------------------------------------------------------------- -*/ - - -/* ========================================== */ -/* description of the videocodec_io structure */ -/* ========================================== */ - -/* - ==== master setup ==== - name -> name of the device structure for reference and debugging - master_data -> data ref. for the master (e.g. the zr36055,57,67) - readreg -> ref. to read-fn from register (setup by master, used by slave) - writereg -> ref. to write-fn to register (setup by master, used by slave) - this two functions do the lowlevel I/O job - - ==== slave functionality setup ==== - slave_data -> data ref. for the slave (e.g. the zr36050,60) - check -> fn-ref. checks availability of an device, returns -EIO on failure or - the type on success - this makes espcecially sense if a driver module supports more than - one codec which may be quite similar to access, nevertheless it - is good for a first functionality check - - -- main functions you always need for compression/decompression -- - - set_mode -> this fn-ref. resets the entire codec, and sets up the mode - with the last defined norm/size (or device default if not - available) - it returns 0 if the mode is possible - set_size -> this fn-ref. sets the norm and image size for - compression/decompression (returns 0 on success) - the norm param is defined in videodev.h (VIDEO_MODE_*) - - additional setup may be available, too - but the codec should work with - some default values even without this - - set_data -> sets device-specific data (tables, quality etc.) - get_data -> query device-specific data (tables, quality etc.) - - if the device delivers interrupts, they may be setup/handled here - setup_interrupt -> codec irq setup (not needed for 36050/60) - handle_interrupt -> codec irq handling (not needed for 36050/60) - - if the device delivers pictures, they may be handled here - put_image -> puts image data to the codec (not needed for 36050/60) - get_image -> gets image data from the codec (not needed for 36050/60) - the calls include frame numbers and flags (even/odd/...) - if needed and a flag which allows blocking until its ready -*/ - -/* ============== */ -/* user interface */ -/* ============== */ - -/* - Currently there is only a information display planned, as the layer - is not visible for the user space at all. - - Information is available via procfs. The current entry is "/proc/videocodecs" - but it makes sense to "hide" it in the /proc/video tree of v4l(2) --TODO--. - -A example for such an output is: - -lave or attached aster name type flags magic (connected as) -S zr36050 0002 0000d001 00000000 (TEMPLATE) -M zr36055[0] 0001 0000c001 00000000 (zr36050[0]) -M zr36055[1] 0001 0000c001 00000000 (zr36050[1]) - -*/ - - -/* =============================================== */ -/* special defines for the videocodec_io structure */ -/* =============================================== */ - -#ifndef __LINUX_VIDEOCODEC_H -#define __LINUX_VIDEOCODEC_H - -#include - -//should be in videodev.h ??? (VID_DO_....) -#define CODEC_DO_COMPRESSION 0 -#define CODEC_DO_EXPANSION 1 - -/* this are the current codec flags I think they are needed */ -/* -> type value in structure */ -#define CODEC_FLAG_JPEG 0x00000001L // JPEG codec -#define CODEC_FLAG_MPEG 0x00000002L // MPEG1/2/4 codec -#define CODEC_FLAG_DIVX 0x00000004L // DIVX codec -#define CODEC_FLAG_WAVELET 0x00000008L // WAVELET codec - // room for other types - -#define CODEC_FLAG_MAGIC 0x00000800L // magic key must match -#define CODEC_FLAG_HARDWARE 0x00001000L // is a hardware codec -#define CODEC_FLAG_VFE 0x00002000L // has direct video frontend -#define CODEC_FLAG_ENCODER 0x00004000L // compression capability -#define CODEC_FLAG_DECODER 0x00008000L // decompression capability -#define CODEC_FLAG_NEEDIRQ 0x00010000L // needs irq handling -#define CODEC_FLAG_RDWRPIC 0x00020000L // handles picture I/O - -/* a list of modes, some are just examples (is there any HW?) */ -#define CODEC_MODE_BJPG 0x0001 // Baseline JPEG -#define CODEC_MODE_LJPG 0x0002 // Lossless JPEG -#define CODEC_MODE_MPEG1 0x0003 // MPEG 1 -#define CODEC_MODE_MPEG2 0x0004 // MPEG 2 -#define CODEC_MODE_MPEG4 0x0005 // MPEG 4 -#define CODEC_MODE_MSDIVX 0x0006 // MS DivX -#define CODEC_MODE_ODIVX 0x0007 // Open DivX -#define CODEC_MODE_WAVELET 0x0008 // Wavelet - -/* this are the current codec types I want to implement */ -/* -> type value in structure */ -#define CODEC_TYPE_NONE 0 -#define CODEC_TYPE_L64702 1 -#define CODEC_TYPE_ZR36050 2 -#define CODEC_TYPE_ZR36016 3 -#define CODEC_TYPE_ZR36060 4 - -/* the type of data may be enhanced by future implementations (data-fn.'s) */ -/* -> used in command */ -#define CODEC_G_STATUS 0x0000 /* codec status (query only) */ -#define CODEC_S_CODEC_MODE 0x0001 /* codec mode (baseline JPEG, MPEG1,... */ -#define CODEC_G_CODEC_MODE 0x8001 -#define CODEC_S_VFE 0x0002 /* additional video frontend setup */ -#define CODEC_G_VFE 0x8002 -#define CODEC_S_MMAP 0x0003 /* MMAP setup (if available) */ - -#define CODEC_S_JPEG_TDS_BYTE 0x0010 /* target data size in bytes */ -#define CODEC_G_JPEG_TDS_BYTE 0x8010 -#define CODEC_S_JPEG_SCALE 0x0011 /* scaling factor for quant. tables */ -#define CODEC_G_JPEG_SCALE 0x8011 -#define CODEC_S_JPEG_HDT_DATA 0x0018 /* huffman-tables */ -#define CODEC_G_JPEG_HDT_DATA 0x8018 -#define CODEC_S_JPEG_QDT_DATA 0x0019 /* quantizing-tables */ -#define CODEC_G_JPEG_QDT_DATA 0x8019 -#define CODEC_S_JPEG_APP_DATA 0x001A /* APP marker */ -#define CODEC_G_JPEG_APP_DATA 0x801A -#define CODEC_S_JPEG_COM_DATA 0x001B /* COM marker */ -#define CODEC_G_JPEG_COM_DATA 0x801B - -#define CODEC_S_PRIVATE 0x1000 /* "private" commands start here */ -#define CODEC_G_PRIVATE 0x9000 - -#define CODEC_G_FLAG 0x8000 /* this is how 'get' is detected */ - -/* types of transfer, directly user space or a kernel buffer (image-fn.'s) */ -/* -> used in get_image, put_image */ -#define CODEC_TRANSFER_KERNEL 0 /* use "memcopy" */ -#define CODEC_TRANSFER_USER 1 /* use "to/from_user" */ - - -/* ========================= */ -/* the structures itself ... */ -/* ========================= */ - -struct vfe_polarity { - unsigned int vsync_pol:1; - unsigned int hsync_pol:1; - unsigned int field_pol:1; - unsigned int blank_pol:1; - unsigned int subimg_pol:1; - unsigned int poe_pol:1; - unsigned int pvalid_pol:1; - unsigned int vclk_pol:1; -}; - -struct vfe_settings { - __u32 x, y; /* Offsets into image */ - __u32 width, height; /* Area to capture */ - __u16 decimation; /* Decimation divider */ - __u16 flags; /* Flags for capture */ -/* flags are the same as in struct video_capture - see videodev.h: -#define VIDEO_CAPTURE_ODD 0 -#define VIDEO_CAPTURE_EVEN 1 -*/ - __u16 quality; /* quality of the video */ -}; - -struct tvnorm { - u16 Wt, Wa, HStart, HSyncStart, Ht, Ha, VStart; -}; - -struct jpeg_com_marker { - int len; /* number of usable bytes in data */ - char data[60]; -}; - -struct jpeg_app_marker { - int appn; /* number app segment */ - int len; /* number of usable bytes in data */ - char data[60]; -}; - -struct videocodec { - struct module *owner; - /* -- filled in by slave device during register -- */ - char name[32]; - unsigned long magic; /* may be used for client<->master attaching */ - unsigned long flags; /* functionality flags */ - unsigned int type; /* codec type */ - - /* -- these is filled in later during master device attach -- */ - - struct videocodec_master *master_data; - - /* -- these are filled in by the slave device during register -- */ - - void *data; /* private slave data */ - - /* attach/detach client functions (indirect call) */ - int (*setup) (struct videocodec * codec); - int (*unset) (struct videocodec * codec); - - /* main functions, every client needs them for sure! */ - // set compression or decompression (or freeze, stop, standby, etc) - int (*set_mode) (struct videocodec * codec, - int mode); - // setup picture size and norm (for the codec's video frontend) - int (*set_video) (struct videocodec * codec, - struct tvnorm * norm, - struct vfe_settings * cap, - struct vfe_polarity * pol); - // other control commands, also mmap setup etc. - int (*control) (struct videocodec * codec, - int type, - int size, - void *data); - - /* additional setup/query/processing (may be NULL pointer) */ - // interrupt setup / handling (for irq's delivered by master) - int (*setup_interrupt) (struct videocodec * codec, - long mode); - int (*handle_interrupt) (struct videocodec * codec, - int source, - long flag); - // picture interface (if any) - long (*put_image) (struct videocodec * codec, - int tr_type, - int block, - long *fr_num, - long *flag, - long size, - void *buf); - long (*get_image) (struct videocodec * codec, - int tr_type, - int block, - long *fr_num, - long *flag, - long size, - void *buf); -}; - -struct videocodec_master { - /* -- filled in by master device for registration -- */ - char name[32]; - unsigned long magic; /* may be used for client<->master attaching */ - unsigned long flags; /* functionality flags */ - unsigned int type; /* master type */ - - void *data; /* private master data */ - - __u32(*readreg) (struct videocodec * codec, - __u16 reg); - void (*writereg) (struct videocodec * codec, - __u16 reg, - __u32 value); -}; - - -/* ================================================= */ -/* function prototypes of the master/slave interface */ -/* ================================================= */ - -/* attach and detach commands for the master */ -// * master structure needs to be kmalloc'ed before calling attach -// and free'd after calling detach -// * returns pointer on success, NULL on failure -extern struct videocodec *videocodec_attach(struct videocodec_master *); -// * 0 on success, <0 (errno) on failure -extern int videocodec_detach(struct videocodec *); - -/* register and unregister commands for the slaves */ -// * 0 on success, <0 (errno) on failure -extern int videocodec_register(const struct videocodec *); -// * 0 on success, <0 (errno) on failure -extern int videocodec_unregister(const struct videocodec *); - -/* the other calls are directly done via the videocodec structure! */ - -#endif /*ifndef __LINUX_VIDEOCODEC_H */ diff --git a/drivers/media/video/zoran.h b/drivers/media/video/zoran.h deleted file mode 100644 index 46b7ad4..0000000 --- a/drivers/media/video/zoran.h +++ /dev/null @@ -1,510 +0,0 @@ -/* - * zoran - Iomega Buz driver - * - * Copyright (C) 1999 Rainer Johanni - * - * based on - * - * zoran.0.0.3 Copyright (C) 1998 Dave Perks - * - * and - * - * bttv - Bt848 frame grabber driver - * Copyright (C) 1996,97,98 Ralph Metzler (rjkm@thp.uni-koeln.de) - * & Marcus Metzler (mocm@thp.uni-koeln.de) - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#ifndef _BUZ_H_ -#define _BUZ_H_ - -struct zoran_requestbuffers { - unsigned long count; /* Number of buffers for MJPEG grabbing */ - unsigned long size; /* Size PER BUFFER in bytes */ -}; - -struct zoran_sync { - unsigned long frame; /* number of buffer that has been free'd */ - unsigned long length; /* number of code bytes in buffer (capture only) */ - unsigned long seq; /* frame sequence number */ - struct timeval timestamp; /* timestamp */ -}; - -struct zoran_status { - int input; /* Input channel, has to be set prior to BUZIOC_G_STATUS */ - int signal; /* Returned: 1 if valid video signal detected */ - int norm; /* Returned: VIDEO_MODE_PAL or VIDEO_MODE_NTSC */ - int color; /* Returned: 1 if color signal detected */ -}; - -struct zoran_params { - - /* The following parameters can only be queried */ - - int major_version; /* Major version number of driver */ - int minor_version; /* Minor version number of driver */ - - /* Main control parameters */ - - int input; /* Input channel: 0 = Composite, 1 = S-VHS */ - int norm; /* Norm: VIDEO_MODE_PAL or VIDEO_MODE_NTSC */ - int decimation; /* decimation of captured video, - * enlargement of video played back. - * Valid values are 1, 2, 4 or 0. - * 0 is a special value where the user - * has full control over video scaling */ - - /* The following parameters only have to be set if decimation==0, - * for other values of decimation they provide the data how the image is captured */ - - int HorDcm; /* Horizontal decimation: 1, 2 or 4 */ - int VerDcm; /* Vertical decimation: 1 or 2 */ - int TmpDcm; /* Temporal decimation: 1 or 2, - * if TmpDcm==2 in capture every second frame is dropped, - * in playback every frame is played twice */ - int field_per_buff; /* Number of fields per buffer: 1 or 2 */ - int img_x; /* start of image in x direction */ - int img_y; /* start of image in y direction */ - int img_width; /* image width BEFORE decimation, - * must be a multiple of HorDcm*16 */ - int img_height; /* image height BEFORE decimation, - * must be a multiple of VerDcm*8 */ - - /* --- End of parameters for decimation==0 only --- */ - - /* JPEG control parameters */ - - int quality; /* Measure for quality of compressed images. - * Scales linearly with the size of the compressed images. - * Must be beetween 0 and 100, 100 is a compression - * ratio of 1:4 */ - - int odd_even; /* Which field should come first ??? */ - - int APPn; /* Number of APP segment to be written, must be 0..15 */ - int APP_len; /* Length of data in JPEG APPn segment */ - char APP_data[60]; /* Data in the JPEG APPn segment. */ - - int COM_len; /* Length of data in JPEG COM segment */ - char COM_data[60]; /* Data in JPEG COM segment */ - - unsigned long jpeg_markers; /* Which markers should go into the JPEG output. - * Unless you exactly know what you do, leave them untouched. - * Inluding less markers will make the resulting code - * smaller, but there will be fewer aplications - * which can read it. - * The presence of the APP and COM marker is - * influenced by APP0_len and COM_len ONLY! */ -#define JPEG_MARKER_DHT (1<<3) /* Define Huffman Tables */ -#define JPEG_MARKER_DQT (1<<4) /* Define Quantization Tables */ -#define JPEG_MARKER_DRI (1<<5) /* Define Restart Interval */ -#define JPEG_MARKER_COM (1<<6) /* Comment segment */ -#define JPEG_MARKER_APP (1<<7) /* App segment, driver will allways use APP0 */ - - int VFIFO_FB; /* Flag for enabling Video Fifo Feedback. - * If this flag is turned on and JPEG decompressing - * is going to the screen, the decompress process - * is stopped every time the Video Fifo is full. - * This enables a smooth decompress to the screen - * but the video output signal will get scrambled */ - - /* Misc */ - - char reserved[312]; /* Makes 512 bytes for this structure */ -}; - -/* -Private IOCTL to set up for displaying MJPEG -*/ -#define BUZIOC_G_PARAMS _IOR ('v', BASE_VIDIOCPRIVATE+0, struct zoran_params) -#define BUZIOC_S_PARAMS _IOWR('v', BASE_VIDIOCPRIVATE+1, struct zoran_params) -#define BUZIOC_REQBUFS _IOWR('v', BASE_VIDIOCPRIVATE+2, struct zoran_requestbuffers) -#define BUZIOC_QBUF_CAPT _IOW ('v', BASE_VIDIOCPRIVATE+3, int) -#define BUZIOC_QBUF_PLAY _IOW ('v', BASE_VIDIOCPRIVATE+4, int) -#define BUZIOC_SYNC _IOR ('v', BASE_VIDIOCPRIVATE+5, struct zoran_sync) -#define BUZIOC_G_STATUS _IOWR('v', BASE_VIDIOCPRIVATE+6, struct zoran_status) - - -#ifdef __KERNEL__ - -#define MAJOR_VERSION 0 /* driver major version */ -#define MINOR_VERSION 9 /* driver minor version */ -#define RELEASE_VERSION 5 /* release version */ - -#define ZORAN_NAME "ZORAN" /* name of the device */ - -#define ZR_DEVNAME(zr) ((zr)->name) - -#define BUZ_MAX_WIDTH (zr->timing->Wa) -#define BUZ_MAX_HEIGHT (zr->timing->Ha) -#define BUZ_MIN_WIDTH 32 /* never display less than 32 pixels */ -#define BUZ_MIN_HEIGHT 24 /* never display less than 24 rows */ - -#define BUZ_NUM_STAT_COM 4 -#define BUZ_MASK_STAT_COM 3 - -#define BUZ_MAX_FRAME 256 /* Must be a power of 2 */ -#define BUZ_MASK_FRAME 255 /* Must be BUZ_MAX_FRAME-1 */ - -#define BUZ_MAX_INPUT 16 - -#if VIDEO_MAX_FRAME <= 32 -# define V4L_MAX_FRAME 32 -#elif VIDEO_MAX_FRAME <= 64 -# define V4L_MAX_FRAME 64 -#else -# error "Too many video frame buffers to handle" -#endif -#define V4L_MASK_FRAME (V4L_MAX_FRAME - 1) - -#define MAX_KMALLOC_MEM (128*1024) - -#include "zr36057.h" - -enum card_type { - UNKNOWN = -1, - - /* Pinnacle/Miro */ - DC10_old, /* DC30 like */ - DC10_new, /* DC10plus like */ - DC10plus, - DC30, - DC30plus, - - /* Linux Media Labs */ - LML33, - LML33R10, - - /* Iomega */ - BUZ, - - /* AverMedia */ - AVS6EYES, - - /* total number of cards */ - NUM_CARDS -}; - -enum zoran_codec_mode { - BUZ_MODE_IDLE, /* nothing going on */ - BUZ_MODE_MOTION_COMPRESS, /* grabbing frames */ - BUZ_MODE_MOTION_DECOMPRESS, /* playing frames */ - BUZ_MODE_STILL_COMPRESS, /* still frame conversion */ - BUZ_MODE_STILL_DECOMPRESS /* still frame conversion */ -}; - -enum zoran_buffer_state { - BUZ_STATE_USER, /* buffer is owned by application */ - BUZ_STATE_PEND, /* buffer is queued in pend[] ready to feed to I/O */ - BUZ_STATE_DMA, /* buffer is queued in dma[] for I/O */ - BUZ_STATE_DONE /* buffer is ready to return to application */ -}; - -enum zoran_map_mode { - ZORAN_MAP_MODE_RAW, - ZORAN_MAP_MODE_JPG_REC, -#define ZORAN_MAP_MODE_JPG ZORAN_MAP_MODE_JPG_REC - ZORAN_MAP_MODE_JPG_PLAY, -}; - -enum gpio_type { - ZR_GPIO_JPEG_SLEEP = 0, - ZR_GPIO_JPEG_RESET, - ZR_GPIO_JPEG_FRAME, - ZR_GPIO_VID_DIR, - ZR_GPIO_VID_EN, - ZR_GPIO_VID_RESET, - ZR_GPIO_CLK_SEL1, - ZR_GPIO_CLK_SEL2, - ZR_GPIO_MAX, -}; - -enum gpcs_type { - GPCS_JPEG_RESET = 0, - GPCS_JPEG_START, - GPCS_MAX, -}; - -struct zoran_format { - char *name; -#ifdef CONFIG_VIDEO_V4L1_COMPAT - int palette; -#endif - __u32 fourcc; - int colorspace; - int depth; - __u32 flags; - __u32 vfespfr; -}; -/* flags */ -#define ZORAN_FORMAT_COMPRESSED 1<<0 -#define ZORAN_FORMAT_OVERLAY 1<<1 -#define ZORAN_FORMAT_CAPTURE 1<<2 -#define ZORAN_FORMAT_PLAYBACK 1<<3 - -/* overlay-settings */ -struct zoran_overlay_settings { - int is_set; - int x, y, width, height; /* position */ - int clipcount; /* position and number of clips */ - const struct zoran_format *format; /* overlay format */ -}; - -/* v4l-capture settings */ -struct zoran_v4l_settings { - int width, height, bytesperline; /* capture size */ - const struct zoran_format *format; /* capture format */ -}; - -/* jpg-capture/-playback settings */ -struct zoran_jpg_settings { - int decimation; /* this bit is used to set everything to default */ - int HorDcm, VerDcm, TmpDcm; /* capture decimation settings (TmpDcm=1 means both fields) */ - int field_per_buff, odd_even; /* field-settings (odd_even=1 (+TmpDcm=1) means top-field-first) */ - int img_x, img_y, img_width, img_height; /* crop settings (subframe capture) */ - struct v4l2_jpegcompression jpg_comp; /* JPEG-specific capture settings */ -}; - -struct zoran_mapping { - struct file *file; - int count; -}; - -struct zoran_jpg_buffer { - struct zoran_mapping *map; - __le32 *frag_tab; /* addresses of frag table */ - u32 frag_tab_bus; /* same value cached to save time in ISR */ - enum zoran_buffer_state state; /* non-zero if corresponding buffer is in use in grab queue */ - struct zoran_sync bs; /* DONE: info to return to application */ -}; - -struct zoran_v4l_buffer { - struct zoran_mapping *map; - char *fbuffer; /* virtual address of frame buffer */ - unsigned long fbuffer_phys; /* physical address of frame buffer */ - unsigned long fbuffer_bus; /* bus address of frame buffer */ - enum zoran_buffer_state state; /* state: unused/pending/done */ - struct zoran_sync bs; /* DONE: info to return to application */ -}; - -enum zoran_lock_activity { - ZORAN_FREE, /* free for use */ - ZORAN_ACTIVE, /* active but unlocked */ - ZORAN_LOCKED, /* locked */ -}; - -/* buffer collections */ -struct zoran_jpg_struct { - enum zoran_lock_activity active; /* feature currently in use? */ - struct zoran_jpg_buffer buffer[BUZ_MAX_FRAME]; /* buffers */ - int num_buffers, buffer_size; - u8 allocated; /* Flag if buffers are allocated */ - u8 ready_to_be_freed; /* hack - see zoran_driver.c */ - u8 need_contiguous; /* Flag if contiguous buffers are needed */ -}; - -struct zoran_v4l_struct { - enum zoran_lock_activity active; /* feature currently in use? */ - struct zoran_v4l_buffer buffer[VIDEO_MAX_FRAME]; /* buffers */ - int num_buffers, buffer_size; - u8 allocated; /* Flag if buffers are allocated */ - u8 ready_to_be_freed; /* hack - see zoran_driver.c */ -}; - -struct zoran; - -/* zoran_fh contains per-open() settings */ -struct zoran_fh { - struct zoran *zr; - - enum zoran_map_mode map_mode; /* Flag which bufferset will map by next mmap() */ - - struct zoran_overlay_settings overlay_settings; - u32 *overlay_mask; /* overlay mask */ - enum zoran_lock_activity overlay_active; /* feature currently in use? */ - - struct zoran_v4l_settings v4l_settings; /* structure with a lot of things to play with */ - struct zoran_v4l_struct v4l_buffers; /* V4L buffers' info */ - - struct zoran_jpg_settings jpg_settings; /* structure with a lot of things to play with */ - struct zoran_jpg_struct jpg_buffers; /* MJPEG buffers' info */ -}; - -struct card_info { - enum card_type type; - char name[32]; - u16 i2c_decoder, i2c_encoder; /* I2C types */ - u16 video_vfe, video_codec; /* videocodec types */ - u16 audio_chip; /* audio type */ - u16 vendor_id, device_id; /* subsystem vendor/device ID */ - - int inputs; /* number of video inputs */ - struct input { - int muxsel; - char name[32]; - } input[BUZ_MAX_INPUT]; - - int norms; - struct tvnorm *tvn[3]; /* supported TV norms */ - - u32 jpeg_int; /* JPEG interrupt */ - u32 vsync_int; /* VSYNC interrupt */ - s8 gpio[ZR_GPIO_MAX]; - u8 gpcs[GPCS_MAX]; - - struct vfe_polarity vfe_pol; - u8 gpio_pol[ZR_GPIO_MAX]; - - /* is the /GWS line conected? */ - u8 gws_not_connected; - - /* avs6eyes mux setting */ - u8 input_mux; - - void (*init) (struct zoran * zr); -}; - -struct zoran { - struct video_device *video_dev; - - struct i2c_adapter i2c_adapter; /* */ - struct i2c_algo_bit_data i2c_algo; /* */ - u32 i2cbr; - - struct i2c_client *decoder; /* video decoder i2c client */ - struct i2c_client *encoder; /* video encoder i2c client */ - - struct videocodec *codec; /* video codec */ - struct videocodec *vfe; /* video front end */ - - struct mutex resource_lock; /* prevent evil stuff */ - - u8 initialized; /* flag if zoran has been correctly initalized */ - int user; /* number of current users */ - struct card_info card; - struct tvnorm *timing; - - unsigned short id; /* number of this device */ - char name[32]; /* name of this device */ - struct pci_dev *pci_dev; /* PCI device */ - unsigned char revision; /* revision of zr36057 */ - unsigned int zr36057_adr; /* bus address of IO mem returned by PCI BIOS */ - unsigned char __iomem *zr36057_mem;/* pointer to mapped IO memory */ - - spinlock_t spinlock; /* Spinlock */ - - /* Video for Linux parameters */ - int input, norm; /* card's norm and input - norm=VIDEO_MODE_* */ - int hue, saturation, contrast, brightness; /* Current picture params */ - struct video_buffer buffer; /* Current buffer params */ - struct zoran_overlay_settings overlay_settings; - u32 *overlay_mask; /* overlay mask */ - enum zoran_lock_activity overlay_active; /* feature currently in use? */ - - wait_queue_head_t v4l_capq; - - int v4l_overlay_active; /* Overlay grab is activated */ - int v4l_memgrab_active; /* Memory grab is activated */ - - int v4l_grab_frame; /* Frame number being currently grabbed */ -#define NO_GRAB_ACTIVE (-1) - unsigned long v4l_grab_seq; /* Number of frames grabbed */ - struct zoran_v4l_settings v4l_settings; /* structure with a lot of things to play with */ - - /* V4L grab queue of frames pending */ - unsigned long v4l_pend_head; - unsigned long v4l_pend_tail; - unsigned long v4l_sync_tail; - int v4l_pend[V4L_MAX_FRAME]; - struct zoran_v4l_struct v4l_buffers; /* V4L buffers' info */ - - /* Buz MJPEG parameters */ - enum zoran_codec_mode codec_mode; /* status of codec */ - struct zoran_jpg_settings jpg_settings; /* structure with a lot of things to play with */ - - wait_queue_head_t jpg_capq; /* wait here for grab to finish */ - - /* grab queue counts/indices, mask with BUZ_MASK_STAT_COM before using as index */ - /* (dma_head - dma_tail) is number active in DMA, must be <= BUZ_NUM_STAT_COM */ - /* (value & BUZ_MASK_STAT_COM) corresponds to index in stat_com table */ - unsigned long jpg_que_head; /* Index where to put next buffer which is queued */ - unsigned long jpg_dma_head; /* Index of next buffer which goes into stat_com */ - unsigned long jpg_dma_tail; /* Index of last buffer in stat_com */ - unsigned long jpg_que_tail; /* Index of last buffer in queue */ - unsigned long jpg_seq_num; /* count of frames since grab/play started */ - unsigned long jpg_err_seq; /* last seq_num before error */ - unsigned long jpg_err_shift; - unsigned long jpg_queued_num; /* count of frames queued since grab/play started */ - - /* zr36057's code buffer table */ - __le32 *stat_com; /* stat_com[i] is indexed by dma_head/tail & BUZ_MASK_STAT_COM */ - - /* (value & BUZ_MASK_FRAME) corresponds to index in pend[] queue */ - int jpg_pend[BUZ_MAX_FRAME]; - - /* array indexed by frame number */ - struct zoran_jpg_struct jpg_buffers; /* MJPEG buffers' info */ - - /* Additional stuff for testing */ -#ifdef CONFIG_PROC_FS - struct proc_dir_entry *zoran_proc; -#else - void *zoran_proc; -#endif - int testing; - int jpeg_error; - int intr_counter_GIRQ1; - int intr_counter_GIRQ0; - int intr_counter_CodRepIRQ; - int intr_counter_JPEGRepIRQ; - int field_counter; - int IRQ1_in; - int IRQ1_out; - int JPEG_in; - int JPEG_out; - int JPEG_0; - int JPEG_1; - int END_event_missed; - int JPEG_missed; - int JPEG_error; - int num_errors; - int JPEG_max_missed; - int JPEG_min_missed; - - u32 last_isr; - unsigned long frame_num; - - wait_queue_head_t test_q; -}; - -/*The following should be done in more portable way. It depends on define - of _ALPHA_BUZ in the Makefile.*/ - -#ifdef _ALPHA_BUZ -#define btwrite(dat,adr) writel((dat), zr->zr36057_adr+(adr)) -#define btread(adr) readl(zr->zr36057_adr+(adr)) -#else -#define btwrite(dat,adr) writel((dat), zr->zr36057_mem+(adr)) -#define btread(adr) readl(zr->zr36057_mem+(adr)) -#endif - -#define btand(dat,adr) btwrite((dat) & btread(adr), adr) -#define btor(dat,adr) btwrite((dat) | btread(adr), adr) -#define btaor(dat,mask,adr) btwrite((dat) | ((mask) & btread(adr)), adr) - -#endif /* __kernel__ */ - -#endif diff --git a/drivers/media/video/zoran/Kconfig b/drivers/media/video/zoran/Kconfig new file mode 100644 index 0000000..4ea5fa7 --- /dev/null +++ b/drivers/media/video/zoran/Kconfig @@ -0,0 +1,73 @@ +config VIDEO_ZORAN + tristate "Zoran ZR36057/36067 Video For Linux" + depends on PCI && I2C_ALGOBIT && VIDEO_V4L1 && VIRT_TO_BUS + help + Say Y for support for MJPEG capture cards based on the Zoran + 36057/36067 PCI controller chipset. This includes the Iomega + Buz, Pinnacle DC10+ and the Linux Media Labs LML33. There is + a driver homepage at . For + more information, check . + + To compile this driver as a module, choose M here: the + module will be called zr36067. + +config VIDEO_ZORAN_DC30 + tristate "Pinnacle/Miro DC30(+) support" + depends on VIDEO_ZORAN + select VIDEO_ADV7175 if VIDEO_HELPER_CHIPS_AUTO + select VIDEO_VPX3220 if VIDEO_HELPER_CHIPS_AUTO + help + Support for the Pinnacle/Miro DC30(+) MJPEG capture/playback + card. This also supports really old DC10 cards based on the + zr36050 MJPEG codec and zr36016 VFE. + +config VIDEO_ZORAN_ZR36060 + tristate "Zoran ZR36060" + depends on VIDEO_ZORAN + help + Say Y to support Zoran boards based on 36060 chips. + This includes Iomega Buz, Pinnacle DC10, Linux media Labs 33 + and 33 R10 and AverMedia 6 boards. + +config VIDEO_ZORAN_BUZ + tristate "Iomega Buz support" + depends on VIDEO_ZORAN_ZR36060 + select VIDEO_SAA7111 if VIDEO_HELPER_CHIPS_AUTO + select VIDEO_SAA7185 if VIDEO_HELPER_CHIPS_AUTO + help + Support for the Iomega Buz MJPEG capture/playback card. + +config VIDEO_ZORAN_DC10 + tristate "Pinnacle/Miro DC10(+) support" + depends on VIDEO_ZORAN_ZR36060 + select VIDEO_SAA7110 if VIDEO_HELPER_CHIPS_AUTO + select VIDEO_ADV7175 if VIDEO_HELPER_CHIPS_AUTO + help + Support for the Pinnacle/Miro DC10(+) MJPEG capture/playback + card. + +config VIDEO_ZORAN_LML33 + tristate "Linux Media Labs LML33 support" + depends on VIDEO_ZORAN_ZR36060 + select VIDEO_BT819 if VIDEO_HELPER_CHIPS_AUTO + select VIDEO_BT856 if VIDEO_HELPER_CHIPS_AUTO + help + Support for the Linux Media Labs LML33 MJPEG capture/playback + card. + +config VIDEO_ZORAN_LML33R10 + tristate "Linux Media Labs LML33R10 support" + depends on VIDEO_ZORAN_ZR36060 + select VIDEO_SAA7114 if VIDEO_HELPER_CHIPS_AUTO + select VIDEO_ADV7170 if VIDEO_HELPER_CHIPS_AUTO + help + support for the Linux Media Labs LML33R10 MJPEG capture/playback + card. + +config VIDEO_ZORAN_AVS6EYES + tristate "AverMedia 6 Eyes support (EXPERIMENTAL)" + depends on VIDEO_ZORAN_ZR36060 && EXPERIMENTAL && VIDEO_V4L1 + select VIDEO_BT856 if VIDEO_HELPER_CHIPS_AUTO + select VIDEO_KS0127 if VIDEO_HELPER_CHIPS_AUTO + help + Support for the AverMedia 6 Eyes video surveillance card. diff --git a/drivers/media/video/zoran/Makefile b/drivers/media/video/zoran/Makefile new file mode 100644 index 0000000..44cc133 --- /dev/null +++ b/drivers/media/video/zoran/Makefile @@ -0,0 +1,6 @@ +zr36067-objs := zoran_procfs.o zoran_device.o \ + zoran_driver.o zoran_card.o + +obj-$(CONFIG_VIDEO_ZORAN) += zr36067.o videocodec.o +obj-$(CONFIG_VIDEO_ZORAN_DC30) += zr36050.o zr36016.o +obj-$(CONFIG_VIDEO_ZORAN_ZR36060) += zr36060.o diff --git a/drivers/media/video/zoran/videocodec.c b/drivers/media/video/zoran/videocodec.c new file mode 100644 index 0000000..cf24956 --- /dev/null +++ b/drivers/media/video/zoran/videocodec.c @@ -0,0 +1,408 @@ +/* + * VIDEO MOTION CODECs internal API for video devices + * + * Interface for MJPEG (and maybe later MPEG/WAVELETS) codec's + * bound to a master device. + * + * (c) 2002 Wolfgang Scherr + * + * $Id: videocodec.c,v 1.1.2.8 2003/03/29 07:16:04 rbultje Exp $ + * + * ------------------------------------------------------------------------ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + * ------------------------------------------------------------------------ + */ + +#define VIDEOCODEC_VERSION "v0.2" + +#include +#include +#include +#include +#include + +// kernel config is here (procfs flag) + +#ifdef CONFIG_PROC_FS +#include +#include +#include +#endif + +#include "videocodec.h" + +static int debug; +module_param(debug, int, 0); +MODULE_PARM_DESC(debug, "Debug level (0-4)"); + +#define dprintk(num, format, args...) \ + do { \ + if (debug >= num) \ + printk(format, ##args); \ + } while (0) + +struct attached_list { + struct videocodec *codec; + struct attached_list *next; +}; + +struct codec_list { + const struct videocodec *codec; + int attached; + struct attached_list *list; + struct codec_list *next; +}; + +static struct codec_list *codeclist_top = NULL; + +/* ================================================= */ +/* function prototypes of the master/slave interface */ +/* ================================================= */ + +struct videocodec * +videocodec_attach (struct videocodec_master *master) +{ + struct codec_list *h = codeclist_top; + struct attached_list *a, *ptr; + struct videocodec *codec; + int res; + + if (!master) { + dprintk(1, KERN_ERR "videocodec_attach: no data\n"); + return NULL; + } + + dprintk(2, + "videocodec_attach: '%s', flags %lx, magic %lx\n", + master->name, master->flags, master->magic); + + if (!h) { + dprintk(1, + KERN_ERR + "videocodec_attach: no device available\n"); + return NULL; + } + + while (h) { + // attach only if the slave has at least the flags + // expected by the master + if ((master->flags & h->codec->flags) == master->flags) { + dprintk(4, "videocodec_attach: try '%s'\n", + h->codec->name); + + if (!try_module_get(h->codec->owner)) + return NULL; + + codec = + kmalloc(sizeof(struct videocodec), GFP_KERNEL); + if (!codec) { + dprintk(1, + KERN_ERR + "videocodec_attach: no mem\n"); + goto out_module_put; + } + memcpy(codec, h->codec, sizeof(struct videocodec)); + + snprintf(codec->name, sizeof(codec->name), + "%s[%d]", codec->name, h->attached); + codec->master_data = master; + res = codec->setup(codec); + if (res == 0) { + dprintk(3, "videocodec_attach '%s'\n", + codec->name); + ptr = kzalloc(sizeof(struct attached_list), GFP_KERNEL); + if (!ptr) { + dprintk(1, + KERN_ERR + "videocodec_attach: no memory\n"); + goto out_kfree; + } + ptr->codec = codec; + + a = h->list; + if (!a) { + h->list = ptr; + dprintk(4, + "videocodec: first element\n"); + } else { + while (a->next) + a = a->next; // find end + a->next = ptr; + dprintk(4, + "videocodec: in after '%s'\n", + h->codec->name); + } + + h->attached += 1; + return codec; + } else { + kfree(codec); + } + } + h = h->next; + } + + dprintk(1, KERN_ERR "videocodec_attach: no codec found!\n"); + return NULL; + + out_module_put: + module_put(h->codec->owner); + out_kfree: + kfree(codec); + return NULL; +} + +int +videocodec_detach (struct videocodec *codec) +{ + struct codec_list *h = codeclist_top; + struct attached_list *a, *prev; + int res; + + if (!codec) { + dprintk(1, KERN_ERR "videocodec_detach: no data\n"); + return -EINVAL; + } + + dprintk(2, + "videocodec_detach: '%s', type: %x, flags %lx, magic %lx\n", + codec->name, codec->type, codec->flags, codec->magic); + + if (!h) { + dprintk(1, + KERN_ERR "videocodec_detach: no device left...\n"); + return -ENXIO; + } + + while (h) { + a = h->list; + prev = NULL; + while (a) { + if (codec == a->codec) { + res = a->codec->unset(a->codec); + if (res >= 0) { + dprintk(3, + "videocodec_detach: '%s'\n", + a->codec->name); + a->codec->master_data = NULL; + } else { + dprintk(1, + KERN_ERR + "videocodec_detach: '%s'\n", + a->codec->name); + a->codec->master_data = NULL; + } + if (prev == NULL) { + h->list = a->next; + dprintk(4, + "videocodec: delete first\n"); + } else { + prev->next = a->next; + dprintk(4, + "videocodec: delete middle\n"); + } + module_put(a->codec->owner); + kfree(a->codec); + kfree(a); + h->attached -= 1; + return 0; + } + prev = a; + a = a->next; + } + h = h->next; + } + + dprintk(1, KERN_ERR "videocodec_detach: given codec not found!\n"); + return -EINVAL; +} + +int +videocodec_register (const struct videocodec *codec) +{ + struct codec_list *ptr, *h = codeclist_top; + + if (!codec) { + dprintk(1, KERN_ERR "videocodec_register: no data!\n"); + return -EINVAL; + } + + dprintk(2, + "videocodec: register '%s', type: %x, flags %lx, magic %lx\n", + codec->name, codec->type, codec->flags, codec->magic); + + ptr = kzalloc(sizeof(struct codec_list), GFP_KERNEL); + if (!ptr) { + dprintk(1, KERN_ERR "videocodec_register: no memory\n"); + return -ENOMEM; + } + ptr->codec = codec; + + if (!h) { + codeclist_top = ptr; + dprintk(4, "videocodec: hooked in as first element\n"); + } else { + while (h->next) + h = h->next; // find the end + h->next = ptr; + dprintk(4, "videocodec: hooked in after '%s'\n", + h->codec->name); + } + + return 0; +} + +int +videocodec_unregister (const struct videocodec *codec) +{ + struct codec_list *prev = NULL, *h = codeclist_top; + + if (!codec) { + dprintk(1, KERN_ERR "videocodec_unregister: no data!\n"); + return -EINVAL; + } + + dprintk(2, + "videocodec: unregister '%s', type: %x, flags %lx, magic %lx\n", + codec->name, codec->type, codec->flags, codec->magic); + + if (!h) { + dprintk(1, + KERN_ERR + "videocodec_unregister: no device left...\n"); + return -ENXIO; + } + + while (h) { + if (codec == h->codec) { + if (h->attached) { + dprintk(1, + KERN_ERR + "videocodec: '%s' is used\n", + h->codec->name); + return -EBUSY; + } + dprintk(3, "videocodec: unregister '%s' is ok.\n", + h->codec->name); + if (prev == NULL) { + codeclist_top = h->next; + dprintk(4, + "videocodec: delete first element\n"); + } else { + prev->next = h->next; + dprintk(4, + "videocodec: delete middle element\n"); + } + kfree(h); + return 0; + } + prev = h; + h = h->next; + } + + dprintk(1, + KERN_ERR + "videocodec_unregister: given codec not found!\n"); + return -EINVAL; +} + +#ifdef CONFIG_PROC_FS +static int proc_videocodecs_show(struct seq_file *m, void *v) +{ + struct codec_list *h = codeclist_top; + struct attached_list *a; + + seq_printf(m, "lave or attached aster name type flags magic "); + seq_printf(m, "(connected as)\n"); + + h = codeclist_top; + while (h) { + seq_printf(m, "S %32s %04x %08lx %08lx (TEMPLATE)\n", + h->codec->name, h->codec->type, + h->codec->flags, h->codec->magic); + a = h->list; + while (a) { + seq_printf(m, "M %32s %04x %08lx %08lx (%s)\n", + a->codec->master_data->name, + a->codec->master_data->type, + a->codec->master_data->flags, + a->codec->master_data->magic, + a->codec->name); + a = a->next; + } + h = h->next; + } + + return 0; +} + +static int proc_videocodecs_open(struct inode *inode, struct file *file) +{ + return single_open(file, proc_videocodecs_show, NULL); +} + +static const struct file_operations videocodecs_proc_fops = { + .owner = THIS_MODULE, + .open = proc_videocodecs_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; +#endif + +/* ===================== */ +/* hook in driver module */ +/* ===================== */ +static int __init +videocodec_init (void) +{ +#ifdef CONFIG_PROC_FS + static struct proc_dir_entry *videocodec_proc_entry; +#endif + + printk(KERN_INFO "Linux video codec intermediate layer: %s\n", + VIDEOCODEC_VERSION); + +#ifdef CONFIG_PROC_FS + videocodec_proc_entry = proc_create("videocodecs", 0, NULL, &videocodecs_proc_fops); + if (!videocodec_proc_entry) { + dprintk(1, KERN_ERR "videocodec: can't init procfs.\n"); + } +#endif + return 0; +} + +static void __exit +videocodec_exit (void) +{ +#ifdef CONFIG_PROC_FS + remove_proc_entry("videocodecs", NULL); +#endif +} + +EXPORT_SYMBOL(videocodec_attach); +EXPORT_SYMBOL(videocodec_detach); +EXPORT_SYMBOL(videocodec_register); +EXPORT_SYMBOL(videocodec_unregister); + +module_init(videocodec_init); +module_exit(videocodec_exit); + +MODULE_AUTHOR("Wolfgang Scherr "); +MODULE_DESCRIPTION("Intermediate API module for video codecs " + VIDEOCODEC_VERSION); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/video/zoran/videocodec.h b/drivers/media/video/zoran/videocodec.h new file mode 100644 index 0000000..97a3bbe --- /dev/null +++ b/drivers/media/video/zoran/videocodec.h @@ -0,0 +1,358 @@ +/* + * VIDEO MOTION CODECs internal API for video devices + * + * Interface for MJPEG (and maybe later MPEG/WAVELETS) codec's + * bound to a master device. + * + * (c) 2002 Wolfgang Scherr + * + * $Id: videocodec.h,v 1.1.2.4 2003/01/14 21:15:03 rbultje Exp $ + * + * ------------------------------------------------------------------------ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + * ------------------------------------------------------------------------ + */ + +/* =================== */ +/* general description */ +/* =================== */ + +/* Should ease the (re-)usage of drivers supporting cards with (different) + video codecs. The codecs register to this module their functionality, + and the processors (masters) can attach to them if they fit. + + The codecs are typically have a "strong" binding to their master - so I + don't think it makes sense to have a full blown interfacing as with e.g. + i2c. If you have an other opinion, let's discuss & implement it :-))) + + Usage: + + The slave has just to setup the videocodec structure and use two functions: + videocodec_register(codecdata); + videocodec_unregister(codecdata); + The best is just calling them at module (de-)initialisation. + + The master sets up the structure videocodec_master and calls: + codecdata=videocodec_attach(master_codecdata); + videocodec_detach(codecdata); + + The slave is called during attach/detach via functions setup previously + during register. At that time, the master_data pointer is set up + and the slave can access any io registers of the master device (in the case + the slave is bound to it). Otherwise it doesn't need this functions and + therfor they may not be initialized. + + The other fuctions are just for convenience, as they are for sure used by + most/all of the codecs. The last ones may be ommited, too. + + See the structure declaration below for more information and which data has + to be set up for the master and the slave. + + ---------------------------------------------------------------------------- + The master should have "knowledge" of the slave and vice versa. So the data + structures sent to/from slave via set_data/get_data set_image/get_image are + device dependent and vary between MJPEG/MPEG/WAVELET/... devices. (!!!!) + ---------------------------------------------------------------------------- +*/ + + +/* ========================================== */ +/* description of the videocodec_io structure */ +/* ========================================== */ + +/* + ==== master setup ==== + name -> name of the device structure for reference and debugging + master_data -> data ref. for the master (e.g. the zr36055,57,67) + readreg -> ref. to read-fn from register (setup by master, used by slave) + writereg -> ref. to write-fn to register (setup by master, used by slave) + this two functions do the lowlevel I/O job + + ==== slave functionality setup ==== + slave_data -> data ref. for the slave (e.g. the zr36050,60) + check -> fn-ref. checks availability of an device, returns -EIO on failure or + the type on success + this makes espcecially sense if a driver module supports more than + one codec which may be quite similar to access, nevertheless it + is good for a first functionality check + + -- main functions you always need for compression/decompression -- + + set_mode -> this fn-ref. resets the entire codec, and sets up the mode + with the last defined norm/size (or device default if not + available) - it returns 0 if the mode is possible + set_size -> this fn-ref. sets the norm and image size for + compression/decompression (returns 0 on success) + the norm param is defined in videodev.h (VIDEO_MODE_*) + + additional setup may be available, too - but the codec should work with + some default values even without this + + set_data -> sets device-specific data (tables, quality etc.) + get_data -> query device-specific data (tables, quality etc.) + + if the device delivers interrupts, they may be setup/handled here + setup_interrupt -> codec irq setup (not needed for 36050/60) + handle_interrupt -> codec irq handling (not needed for 36050/60) + + if the device delivers pictures, they may be handled here + put_image -> puts image data to the codec (not needed for 36050/60) + get_image -> gets image data from the codec (not needed for 36050/60) + the calls include frame numbers and flags (even/odd/...) + if needed and a flag which allows blocking until its ready +*/ + +/* ============== */ +/* user interface */ +/* ============== */ + +/* + Currently there is only a information display planned, as the layer + is not visible for the user space at all. + + Information is available via procfs. The current entry is "/proc/videocodecs" + but it makes sense to "hide" it in the /proc/video tree of v4l(2) --TODO--. + +A example for such an output is: + +lave or attached aster name type flags magic (connected as) +S zr36050 0002 0000d001 00000000 (TEMPLATE) +M zr36055[0] 0001 0000c001 00000000 (zr36050[0]) +M zr36055[1] 0001 0000c001 00000000 (zr36050[1]) + +*/ + + +/* =============================================== */ +/* special defines for the videocodec_io structure */ +/* =============================================== */ + +#ifndef __LINUX_VIDEOCODEC_H +#define __LINUX_VIDEOCODEC_H + +#include + +//should be in videodev.h ??? (VID_DO_....) +#define CODEC_DO_COMPRESSION 0 +#define CODEC_DO_EXPANSION 1 + +/* this are the current codec flags I think they are needed */ +/* -> type value in structure */ +#define CODEC_FLAG_JPEG 0x00000001L // JPEG codec +#define CODEC_FLAG_MPEG 0x00000002L // MPEG1/2/4 codec +#define CODEC_FLAG_DIVX 0x00000004L // DIVX codec +#define CODEC_FLAG_WAVELET 0x00000008L // WAVELET codec + // room for other types + +#define CODEC_FLAG_MAGIC 0x00000800L // magic key must match +#define CODEC_FLAG_HARDWARE 0x00001000L // is a hardware codec +#define CODEC_FLAG_VFE 0x00002000L // has direct video frontend +#define CODEC_FLAG_ENCODER 0x00004000L // compression capability +#define CODEC_FLAG_DECODER 0x00008000L // decompression capability +#define CODEC_FLAG_NEEDIRQ 0x00010000L // needs irq handling +#define CODEC_FLAG_RDWRPIC 0x00020000L // handles picture I/O + +/* a list of modes, some are just examples (is there any HW?) */ +#define CODEC_MODE_BJPG 0x0001 // Baseline JPEG +#define CODEC_MODE_LJPG 0x0002 // Lossless JPEG +#define CODEC_MODE_MPEG1 0x0003 // MPEG 1 +#define CODEC_MODE_MPEG2 0x0004 // MPEG 2 +#define CODEC_MODE_MPEG4 0x0005 // MPEG 4 +#define CODEC_MODE_MSDIVX 0x0006 // MS DivX +#define CODEC_MODE_ODIVX 0x0007 // Open DivX +#define CODEC_MODE_WAVELET 0x0008 // Wavelet + +/* this are the current codec types I want to implement */ +/* -> type value in structure */ +#define CODEC_TYPE_NONE 0 +#define CODEC_TYPE_L64702 1 +#define CODEC_TYPE_ZR36050 2 +#define CODEC_TYPE_ZR36016 3 +#define CODEC_TYPE_ZR36060 4 + +/* the type of data may be enhanced by future implementations (data-fn.'s) */ +/* -> used in command */ +#define CODEC_G_STATUS 0x0000 /* codec status (query only) */ +#define CODEC_S_CODEC_MODE 0x0001 /* codec mode (baseline JPEG, MPEG1,... */ +#define CODEC_G_CODEC_MODE 0x8001 +#define CODEC_S_VFE 0x0002 /* additional video frontend setup */ +#define CODEC_G_VFE 0x8002 +#define CODEC_S_MMAP 0x0003 /* MMAP setup (if available) */ + +#define CODEC_S_JPEG_TDS_BYTE 0x0010 /* target data size in bytes */ +#define CODEC_G_JPEG_TDS_BYTE 0x8010 +#define CODEC_S_JPEG_SCALE 0x0011 /* scaling factor for quant. tables */ +#define CODEC_G_JPEG_SCALE 0x8011 +#define CODEC_S_JPEG_HDT_DATA 0x0018 /* huffman-tables */ +#define CODEC_G_JPEG_HDT_DATA 0x8018 +#define CODEC_S_JPEG_QDT_DATA 0x0019 /* quantizing-tables */ +#define CODEC_G_JPEG_QDT_DATA 0x8019 +#define CODEC_S_JPEG_APP_DATA 0x001A /* APP marker */ +#define CODEC_G_JPEG_APP_DATA 0x801A +#define CODEC_S_JPEG_COM_DATA 0x001B /* COM marker */ +#define CODEC_G_JPEG_COM_DATA 0x801B + +#define CODEC_S_PRIVATE 0x1000 /* "private" commands start here */ +#define CODEC_G_PRIVATE 0x9000 + +#define CODEC_G_FLAG 0x8000 /* this is how 'get' is detected */ + +/* types of transfer, directly user space or a kernel buffer (image-fn.'s) */ +/* -> used in get_image, put_image */ +#define CODEC_TRANSFER_KERNEL 0 /* use "memcopy" */ +#define CODEC_TRANSFER_USER 1 /* use "to/from_user" */ + + +/* ========================= */ +/* the structures itself ... */ +/* ========================= */ + +struct vfe_polarity { + unsigned int vsync_pol:1; + unsigned int hsync_pol:1; + unsigned int field_pol:1; + unsigned int blank_pol:1; + unsigned int subimg_pol:1; + unsigned int poe_pol:1; + unsigned int pvalid_pol:1; + unsigned int vclk_pol:1; +}; + +struct vfe_settings { + __u32 x, y; /* Offsets into image */ + __u32 width, height; /* Area to capture */ + __u16 decimation; /* Decimation divider */ + __u16 flags; /* Flags for capture */ +/* flags are the same as in struct video_capture - see videodev.h: +#define VIDEO_CAPTURE_ODD 0 +#define VIDEO_CAPTURE_EVEN 1 +*/ + __u16 quality; /* quality of the video */ +}; + +struct tvnorm { + u16 Wt, Wa, HStart, HSyncStart, Ht, Ha, VStart; +}; + +struct jpeg_com_marker { + int len; /* number of usable bytes in data */ + char data[60]; +}; + +struct jpeg_app_marker { + int appn; /* number app segment */ + int len; /* number of usable bytes in data */ + char data[60]; +}; + +struct videocodec { + struct module *owner; + /* -- filled in by slave device during register -- */ + char name[32]; + unsigned long magic; /* may be used for client<->master attaching */ + unsigned long flags; /* functionality flags */ + unsigned int type; /* codec type */ + + /* -- these is filled in later during master device attach -- */ + + struct videocodec_master *master_data; + + /* -- these are filled in by the slave device during register -- */ + + void *data; /* private slave data */ + + /* attach/detach client functions (indirect call) */ + int (*setup) (struct videocodec * codec); + int (*unset) (struct videocodec * codec); + + /* main functions, every client needs them for sure! */ + // set compression or decompression (or freeze, stop, standby, etc) + int (*set_mode) (struct videocodec * codec, + int mode); + // setup picture size and norm (for the codec's video frontend) + int (*set_video) (struct videocodec * codec, + struct tvnorm * norm, + struct vfe_settings * cap, + struct vfe_polarity * pol); + // other control commands, also mmap setup etc. + int (*control) (struct videocodec * codec, + int type, + int size, + void *data); + + /* additional setup/query/processing (may be NULL pointer) */ + // interrupt setup / handling (for irq's delivered by master) + int (*setup_interrupt) (struct videocodec * codec, + long mode); + int (*handle_interrupt) (struct videocodec * codec, + int source, + long flag); + // picture interface (if any) + long (*put_image) (struct videocodec * codec, + int tr_type, + int block, + long *fr_num, + long *flag, + long size, + void *buf); + long (*get_image) (struct videocodec * codec, + int tr_type, + int block, + long *fr_num, + long *flag, + long size, + void *buf); +}; + +struct videocodec_master { + /* -- filled in by master device for registration -- */ + char name[32]; + unsigned long magic; /* may be used for client<->master attaching */ + unsigned long flags; /* functionality flags */ + unsigned int type; /* master type */ + + void *data; /* private master data */ + + __u32(*readreg) (struct videocodec * codec, + __u16 reg); + void (*writereg) (struct videocodec * codec, + __u16 reg, + __u32 value); +}; + + +/* ================================================= */ +/* function prototypes of the master/slave interface */ +/* ================================================= */ + +/* attach and detach commands for the master */ +// * master structure needs to be kmalloc'ed before calling attach +// and free'd after calling detach +// * returns pointer on success, NULL on failure +extern struct videocodec *videocodec_attach(struct videocodec_master *); +// * 0 on success, <0 (errno) on failure +extern int videocodec_detach(struct videocodec *); + +/* register and unregister commands for the slaves */ +// * 0 on success, <0 (errno) on failure +extern int videocodec_register(const struct videocodec *); +// * 0 on success, <0 (errno) on failure +extern int videocodec_unregister(const struct videocodec *); + +/* the other calls are directly done via the videocodec structure! */ + +#endif /*ifndef __LINUX_VIDEOCODEC_H */ diff --git a/drivers/media/video/zoran/zoran.h b/drivers/media/video/zoran/zoran.h new file mode 100644 index 0000000..46b7ad4 --- /dev/null +++ b/drivers/media/video/zoran/zoran.h @@ -0,0 +1,510 @@ +/* + * zoran - Iomega Buz driver + * + * Copyright (C) 1999 Rainer Johanni + * + * based on + * + * zoran.0.0.3 Copyright (C) 1998 Dave Perks + * + * and + * + * bttv - Bt848 frame grabber driver + * Copyright (C) 1996,97,98 Ralph Metzler (rjkm@thp.uni-koeln.de) + * & Marcus Metzler (mocm@thp.uni-koeln.de) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef _BUZ_H_ +#define _BUZ_H_ + +struct zoran_requestbuffers { + unsigned long count; /* Number of buffers for MJPEG grabbing */ + unsigned long size; /* Size PER BUFFER in bytes */ +}; + +struct zoran_sync { + unsigned long frame; /* number of buffer that has been free'd */ + unsigned long length; /* number of code bytes in buffer (capture only) */ + unsigned long seq; /* frame sequence number */ + struct timeval timestamp; /* timestamp */ +}; + +struct zoran_status { + int input; /* Input channel, has to be set prior to BUZIOC_G_STATUS */ + int signal; /* Returned: 1 if valid video signal detected */ + int norm; /* Returned: VIDEO_MODE_PAL or VIDEO_MODE_NTSC */ + int color; /* Returned: 1 if color signal detected */ +}; + +struct zoran_params { + + /* The following parameters can only be queried */ + + int major_version; /* Major version number of driver */ + int minor_version; /* Minor version number of driver */ + + /* Main control parameters */ + + int input; /* Input channel: 0 = Composite, 1 = S-VHS */ + int norm; /* Norm: VIDEO_MODE_PAL or VIDEO_MODE_NTSC */ + int decimation; /* decimation of captured video, + * enlargement of video played back. + * Valid values are 1, 2, 4 or 0. + * 0 is a special value where the user + * has full control over video scaling */ + + /* The following parameters only have to be set if decimation==0, + * for other values of decimation they provide the data how the image is captured */ + + int HorDcm; /* Horizontal decimation: 1, 2 or 4 */ + int VerDcm; /* Vertical decimation: 1 or 2 */ + int TmpDcm; /* Temporal decimation: 1 or 2, + * if TmpDcm==2 in capture every second frame is dropped, + * in playback every frame is played twice */ + int field_per_buff; /* Number of fields per buffer: 1 or 2 */ + int img_x; /* start of image in x direction */ + int img_y; /* start of image in y direction */ + int img_width; /* image width BEFORE decimation, + * must be a multiple of HorDcm*16 */ + int img_height; /* image height BEFORE decimation, + * must be a multiple of VerDcm*8 */ + + /* --- End of parameters for decimation==0 only --- */ + + /* JPEG control parameters */ + + int quality; /* Measure for quality of compressed images. + * Scales linearly with the size of the compressed images. + * Must be beetween 0 and 100, 100 is a compression + * ratio of 1:4 */ + + int odd_even; /* Which field should come first ??? */ + + int APPn; /* Number of APP segment to be written, must be 0..15 */ + int APP_len; /* Length of data in JPEG APPn segment */ + char APP_data[60]; /* Data in the JPEG APPn segment. */ + + int COM_len; /* Length of data in JPEG COM segment */ + char COM_data[60]; /* Data in JPEG COM segment */ + + unsigned long jpeg_markers; /* Which markers should go into the JPEG output. + * Unless you exactly know what you do, leave them untouched. + * Inluding less markers will make the resulting code + * smaller, but there will be fewer aplications + * which can read it. + * The presence of the APP and COM marker is + * influenced by APP0_len and COM_len ONLY! */ +#define JPEG_MARKER_DHT (1<<3) /* Define Huffman Tables */ +#define JPEG_MARKER_DQT (1<<4) /* Define Quantization Tables */ +#define JPEG_MARKER_DRI (1<<5) /* Define Restart Interval */ +#define JPEG_MARKER_COM (1<<6) /* Comment segment */ +#define JPEG_MARKER_APP (1<<7) /* App segment, driver will allways use APP0 */ + + int VFIFO_FB; /* Flag for enabling Video Fifo Feedback. + * If this flag is turned on and JPEG decompressing + * is going to the screen, the decompress process + * is stopped every time the Video Fifo is full. + * This enables a smooth decompress to the screen + * but the video output signal will get scrambled */ + + /* Misc */ + + char reserved[312]; /* Makes 512 bytes for this structure */ +}; + +/* +Private IOCTL to set up for displaying MJPEG +*/ +#define BUZIOC_G_PARAMS _IOR ('v', BASE_VIDIOCPRIVATE+0, struct zoran_params) +#define BUZIOC_S_PARAMS _IOWR('v', BASE_VIDIOCPRIVATE+1, struct zoran_params) +#define BUZIOC_REQBUFS _IOWR('v', BASE_VIDIOCPRIVATE+2, struct zoran_requestbuffers) +#define BUZIOC_QBUF_CAPT _IOW ('v', BASE_VIDIOCPRIVATE+3, int) +#define BUZIOC_QBUF_PLAY _IOW ('v', BASE_VIDIOCPRIVATE+4, int) +#define BUZIOC_SYNC _IOR ('v', BASE_VIDIOCPRIVATE+5, struct zoran_sync) +#define BUZIOC_G_STATUS _IOWR('v', BASE_VIDIOCPRIVATE+6, struct zoran_status) + + +#ifdef __KERNEL__ + +#define MAJOR_VERSION 0 /* driver major version */ +#define MINOR_VERSION 9 /* driver minor version */ +#define RELEASE_VERSION 5 /* release version */ + +#define ZORAN_NAME "ZORAN" /* name of the device */ + +#define ZR_DEVNAME(zr) ((zr)->name) + +#define BUZ_MAX_WIDTH (zr->timing->Wa) +#define BUZ_MAX_HEIGHT (zr->timing->Ha) +#define BUZ_MIN_WIDTH 32 /* never display less than 32 pixels */ +#define BUZ_MIN_HEIGHT 24 /* never display less than 24 rows */ + +#define BUZ_NUM_STAT_COM 4 +#define BUZ_MASK_STAT_COM 3 + +#define BUZ_MAX_FRAME 256 /* Must be a power of 2 */ +#define BUZ_MASK_FRAME 255 /* Must be BUZ_MAX_FRAME-1 */ + +#define BUZ_MAX_INPUT 16 + +#if VIDEO_MAX_FRAME <= 32 +# define V4L_MAX_FRAME 32 +#elif VIDEO_MAX_FRAME <= 64 +# define V4L_MAX_FRAME 64 +#else +# error "Too many video frame buffers to handle" +#endif +#define V4L_MASK_FRAME (V4L_MAX_FRAME - 1) + +#define MAX_KMALLOC_MEM (128*1024) + +#include "zr36057.h" + +enum card_type { + UNKNOWN = -1, + + /* Pinnacle/Miro */ + DC10_old, /* DC30 like */ + DC10_new, /* DC10plus like */ + DC10plus, + DC30, + DC30plus, + + /* Linux Media Labs */ + LML33, + LML33R10, + + /* Iomega */ + BUZ, + + /* AverMedia */ + AVS6EYES, + + /* total number of cards */ + NUM_CARDS +}; + +enum zoran_codec_mode { + BUZ_MODE_IDLE, /* nothing going on */ + BUZ_MODE_MOTION_COMPRESS, /* grabbing frames */ + BUZ_MODE_MOTION_DECOMPRESS, /* playing frames */ + BUZ_MODE_STILL_COMPRESS, /* still frame conversion */ + BUZ_MODE_STILL_DECOMPRESS /* still frame conversion */ +}; + +enum zoran_buffer_state { + BUZ_STATE_USER, /* buffer is owned by application */ + BUZ_STATE_PEND, /* buffer is queued in pend[] ready to feed to I/O */ + BUZ_STATE_DMA, /* buffer is queued in dma[] for I/O */ + BUZ_STATE_DONE /* buffer is ready to return to application */ +}; + +enum zoran_map_mode { + ZORAN_MAP_MODE_RAW, + ZORAN_MAP_MODE_JPG_REC, +#define ZORAN_MAP_MODE_JPG ZORAN_MAP_MODE_JPG_REC + ZORAN_MAP_MODE_JPG_PLAY, +}; + +enum gpio_type { + ZR_GPIO_JPEG_SLEEP = 0, + ZR_GPIO_JPEG_RESET, + ZR_GPIO_JPEG_FRAME, + ZR_GPIO_VID_DIR, + ZR_GPIO_VID_EN, + ZR_GPIO_VID_RESET, + ZR_GPIO_CLK_SEL1, + ZR_GPIO_CLK_SEL2, + ZR_GPIO_MAX, +}; + +enum gpcs_type { + GPCS_JPEG_RESET = 0, + GPCS_JPEG_START, + GPCS_MAX, +}; + +struct zoran_format { + char *name; +#ifdef CONFIG_VIDEO_V4L1_COMPAT + int palette; +#endif + __u32 fourcc; + int colorspace; + int depth; + __u32 flags; + __u32 vfespfr; +}; +/* flags */ +#define ZORAN_FORMAT_COMPRESSED 1<<0 +#define ZORAN_FORMAT_OVERLAY 1<<1 +#define ZORAN_FORMAT_CAPTURE 1<<2 +#define ZORAN_FORMAT_PLAYBACK 1<<3 + +/* overlay-settings */ +struct zoran_overlay_settings { + int is_set; + int x, y, width, height; /* position */ + int clipcount; /* position and number of clips */ + const struct zoran_format *format; /* overlay format */ +}; + +/* v4l-capture settings */ +struct zoran_v4l_settings { + int width, height, bytesperline; /* capture size */ + const struct zoran_format *format; /* capture format */ +}; + +/* jpg-capture/-playback settings */ +struct zoran_jpg_settings { + int decimation; /* this bit is used to set everything to default */ + int HorDcm, VerDcm, TmpDcm; /* capture decimation settings (TmpDcm=1 means both fields) */ + int field_per_buff, odd_even; /* field-settings (odd_even=1 (+TmpDcm=1) means top-field-first) */ + int img_x, img_y, img_width, img_height; /* crop settings (subframe capture) */ + struct v4l2_jpegcompression jpg_comp; /* JPEG-specific capture settings */ +}; + +struct zoran_mapping { + struct file *file; + int count; +}; + +struct zoran_jpg_buffer { + struct zoran_mapping *map; + __le32 *frag_tab; /* addresses of frag table */ + u32 frag_tab_bus; /* same value cached to save time in ISR */ + enum zoran_buffer_state state; /* non-zero if corresponding buffer is in use in grab queue */ + struct zoran_sync bs; /* DONE: info to return to application */ +}; + +struct zoran_v4l_buffer { + struct zoran_mapping *map; + char *fbuffer; /* virtual address of frame buffer */ + unsigned long fbuffer_phys; /* physical address of frame buffer */ + unsigned long fbuffer_bus; /* bus address of frame buffer */ + enum zoran_buffer_state state; /* state: unused/pending/done */ + struct zoran_sync bs; /* DONE: info to return to application */ +}; + +enum zoran_lock_activity { + ZORAN_FREE, /* free for use */ + ZORAN_ACTIVE, /* active but unlocked */ + ZORAN_LOCKED, /* locked */ +}; + +/* buffer collections */ +struct zoran_jpg_struct { + enum zoran_lock_activity active; /* feature currently in use? */ + struct zoran_jpg_buffer buffer[BUZ_MAX_FRAME]; /* buffers */ + int num_buffers, buffer_size; + u8 allocated; /* Flag if buffers are allocated */ + u8 ready_to_be_freed; /* hack - see zoran_driver.c */ + u8 need_contiguous; /* Flag if contiguous buffers are needed */ +}; + +struct zoran_v4l_struct { + enum zoran_lock_activity active; /* feature currently in use? */ + struct zoran_v4l_buffer buffer[VIDEO_MAX_FRAME]; /* buffers */ + int num_buffers, buffer_size; + u8 allocated; /* Flag if buffers are allocated */ + u8 ready_to_be_freed; /* hack - see zoran_driver.c */ +}; + +struct zoran; + +/* zoran_fh contains per-open() settings */ +struct zoran_fh { + struct zoran *zr; + + enum zoran_map_mode map_mode; /* Flag which bufferset will map by next mmap() */ + + struct zoran_overlay_settings overlay_settings; + u32 *overlay_mask; /* overlay mask */ + enum zoran_lock_activity overlay_active; /* feature currently in use? */ + + struct zoran_v4l_settings v4l_settings; /* structure with a lot of things to play with */ + struct zoran_v4l_struct v4l_buffers; /* V4L buffers' info */ + + struct zoran_jpg_settings jpg_settings; /* structure with a lot of things to play with */ + struct zoran_jpg_struct jpg_buffers; /* MJPEG buffers' info */ +}; + +struct card_info { + enum card_type type; + char name[32]; + u16 i2c_decoder, i2c_encoder; /* I2C types */ + u16 video_vfe, video_codec; /* videocodec types */ + u16 audio_chip; /* audio type */ + u16 vendor_id, device_id; /* subsystem vendor/device ID */ + + int inputs; /* number of video inputs */ + struct input { + int muxsel; + char name[32]; + } input[BUZ_MAX_INPUT]; + + int norms; + struct tvnorm *tvn[3]; /* supported TV norms */ + + u32 jpeg_int; /* JPEG interrupt */ + u32 vsync_int; /* VSYNC interrupt */ + s8 gpio[ZR_GPIO_MAX]; + u8 gpcs[GPCS_MAX]; + + struct vfe_polarity vfe_pol; + u8 gpio_pol[ZR_GPIO_MAX]; + + /* is the /GWS line conected? */ + u8 gws_not_connected; + + /* avs6eyes mux setting */ + u8 input_mux; + + void (*init) (struct zoran * zr); +}; + +struct zoran { + struct video_device *video_dev; + + struct i2c_adapter i2c_adapter; /* */ + struct i2c_algo_bit_data i2c_algo; /* */ + u32 i2cbr; + + struct i2c_client *decoder; /* video decoder i2c client */ + struct i2c_client *encoder; /* video encoder i2c client */ + + struct videocodec *codec; /* video codec */ + struct videocodec *vfe; /* video front end */ + + struct mutex resource_lock; /* prevent evil stuff */ + + u8 initialized; /* flag if zoran has been correctly initalized */ + int user; /* number of current users */ + struct card_info card; + struct tvnorm *timing; + + unsigned short id; /* number of this device */ + char name[32]; /* name of this device */ + struct pci_dev *pci_dev; /* PCI device */ + unsigned char revision; /* revision of zr36057 */ + unsigned int zr36057_adr; /* bus address of IO mem returned by PCI BIOS */ + unsigned char __iomem *zr36057_mem;/* pointer to mapped IO memory */ + + spinlock_t spinlock; /* Spinlock */ + + /* Video for Linux parameters */ + int input, norm; /* card's norm and input - norm=VIDEO_MODE_* */ + int hue, saturation, contrast, brightness; /* Current picture params */ + struct video_buffer buffer; /* Current buffer params */ + struct zoran_overlay_settings overlay_settings; + u32 *overlay_mask; /* overlay mask */ + enum zoran_lock_activity overlay_active; /* feature currently in use? */ + + wait_queue_head_t v4l_capq; + + int v4l_overlay_active; /* Overlay grab is activated */ + int v4l_memgrab_active; /* Memory grab is activated */ + + int v4l_grab_frame; /* Frame number being currently grabbed */ +#define NO_GRAB_ACTIVE (-1) + unsigned long v4l_grab_seq; /* Number of frames grabbed */ + struct zoran_v4l_settings v4l_settings; /* structure with a lot of things to play with */ + + /* V4L grab queue of frames pending */ + unsigned long v4l_pend_head; + unsigned long v4l_pend_tail; + unsigned long v4l_sync_tail; + int v4l_pend[V4L_MAX_FRAME]; + struct zoran_v4l_struct v4l_buffers; /* V4L buffers' info */ + + /* Buz MJPEG parameters */ + enum zoran_codec_mode codec_mode; /* status of codec */ + struct zoran_jpg_settings jpg_settings; /* structure with a lot of things to play with */ + + wait_queue_head_t jpg_capq; /* wait here for grab to finish */ + + /* grab queue counts/indices, mask with BUZ_MASK_STAT_COM before using as index */ + /* (dma_head - dma_tail) is number active in DMA, must be <= BUZ_NUM_STAT_COM */ + /* (value & BUZ_MASK_STAT_COM) corresponds to index in stat_com table */ + unsigned long jpg_que_head; /* Index where to put next buffer which is queued */ + unsigned long jpg_dma_head; /* Index of next buffer which goes into stat_com */ + unsigned long jpg_dma_tail; /* Index of last buffer in stat_com */ + unsigned long jpg_que_tail; /* Index of last buffer in queue */ + unsigned long jpg_seq_num; /* count of frames since grab/play started */ + unsigned long jpg_err_seq; /* last seq_num before error */ + unsigned long jpg_err_shift; + unsigned long jpg_queued_num; /* count of frames queued since grab/play started */ + + /* zr36057's code buffer table */ + __le32 *stat_com; /* stat_com[i] is indexed by dma_head/tail & BUZ_MASK_STAT_COM */ + + /* (value & BUZ_MASK_FRAME) corresponds to index in pend[] queue */ + int jpg_pend[BUZ_MAX_FRAME]; + + /* array indexed by frame number */ + struct zoran_jpg_struct jpg_buffers; /* MJPEG buffers' info */ + + /* Additional stuff for testing */ +#ifdef CONFIG_PROC_FS + struct proc_dir_entry *zoran_proc; +#else + void *zoran_proc; +#endif + int testing; + int jpeg_error; + int intr_counter_GIRQ1; + int intr_counter_GIRQ0; + int intr_counter_CodRepIRQ; + int intr_counter_JPEGRepIRQ; + int field_counter; + int IRQ1_in; + int IRQ1_out; + int JPEG_in; + int JPEG_out; + int JPEG_0; + int JPEG_1; + int END_event_missed; + int JPEG_missed; + int JPEG_error; + int num_errors; + int JPEG_max_missed; + int JPEG_min_missed; + + u32 last_isr; + unsigned long frame_num; + + wait_queue_head_t test_q; +}; + +/*The following should be done in more portable way. It depends on define + of _ALPHA_BUZ in the Makefile.*/ + +#ifdef _ALPHA_BUZ +#define btwrite(dat,adr) writel((dat), zr->zr36057_adr+(adr)) +#define btread(adr) readl(zr->zr36057_adr+(adr)) +#else +#define btwrite(dat,adr) writel((dat), zr->zr36057_mem+(adr)) +#define btread(adr) readl(zr->zr36057_mem+(adr)) +#endif + +#define btand(dat,adr) btwrite((dat) & btread(adr), adr) +#define btor(dat,adr) btwrite((dat) | btread(adr), adr) +#define btaor(dat,mask,adr) btwrite((dat) | ((mask) & btread(adr)), adr) + +#endif /* __kernel__ */ + +#endif diff --git a/drivers/media/video/zoran/zoran_card.c b/drivers/media/video/zoran/zoran_card.c new file mode 100644 index 0000000..3282be7 --- /dev/null +++ b/drivers/media/video/zoran/zoran_card.c @@ -0,0 +1,1670 @@ +/* + * Zoran zr36057/zr36067 PCI controller driver, for the + * Pinnacle/Miro DC10/DC10+/DC30/DC30+, Iomega Buz, Linux + * Media Labs LML33/LML33R10. + * + * This part handles card-specific data and detection + * + * Copyright (C) 2000 Serguei Miridonov + * + * Currently maintained by: + * Ronald Bultje + * Laurent Pinchart + * Mailinglist + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include + +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include + +#include + +#include "videocodec.h" +#include "zoran.h" +#include "zoran_card.h" +#include "zoran_device.h" +#include "zoran_procfs.h" + +extern const struct zoran_format zoran_formats[]; + +static int card[BUZ_MAX] = { -1, -1, -1, -1 }; +module_param_array(card, int, NULL, 0444); +MODULE_PARM_DESC(card, "The type of card"); + +static int encoder[BUZ_MAX] = { -1, -1, -1, -1 }; +module_param_array(encoder, int, NULL, 0444); +MODULE_PARM_DESC(encoder, "i2c TV encoder"); + +static int decoder[BUZ_MAX] = { -1, -1, -1, -1 }; +module_param_array(decoder, int, NULL, 0444); +MODULE_PARM_DESC(decoder, "i2c TV decoder"); + +/* + The video mem address of the video card. + The driver has a little database for some videocards + to determine it from there. If your video card is not in there + you have either to give it to the driver as a parameter + or set in in a VIDIOCSFBUF ioctl + */ + +static unsigned long vidmem; /* default = 0 - Video memory base address */ +module_param(vidmem, ulong, 0444); +MODULE_PARM_DESC(vidmem, "Default video memory base address"); + +/* + Default input and video norm at startup of the driver. +*/ + +static unsigned int default_input; /* default 0 = Composite, 1 = S-Video */ +module_param(default_input, uint, 0444); +MODULE_PARM_DESC(default_input, + "Default input (0=Composite, 1=S-Video, 2=Internal)"); + +static int default_mux = 1; /* 6 Eyes input selection */ +module_param(default_mux, int, 0644); +MODULE_PARM_DESC(default_mux, + "Default 6 Eyes mux setting (Input selection)"); + +static int default_norm; /* default 0 = PAL, 1 = NTSC 2 = SECAM */ +module_param(default_norm, int, 0444); +MODULE_PARM_DESC(default_norm, "Default norm (0=PAL, 1=NTSC, 2=SECAM)"); + +/* /dev/videoN, -1 for autodetect */ +static int video_nr[BUZ_MAX] = {-1, -1, -1, -1}; +module_param_array(video_nr, int, NULL, 0444); +MODULE_PARM_DESC(video_nr, "video device number (-1=Auto)"); + +/* + Number and size of grab buffers for Video 4 Linux + The vast majority of applications should not need more than 2, + the very popular BTTV driver actually does ONLY have 2. + Time sensitive applications might need more, the maximum + is VIDEO_MAX_FRAME (defined in ). + + The size is set so that the maximum possible request + can be satisfied. Decrease it, if bigphys_area alloc'd + memory is low. If you don't have the bigphys_area patch, + set it to 128 KB. Will you allow only to grab small + images with V4L, but that's better than nothing. + + v4l_bufsize has to be given in KB ! + +*/ + +int v4l_nbufs = 2; +int v4l_bufsize = 128; /* Everybody should be able to work with this setting */ +module_param(v4l_nbufs, int, 0644); +MODULE_PARM_DESC(v4l_nbufs, "Maximum number of V4L buffers to use"); +module_param(v4l_bufsize, int, 0644); +MODULE_PARM_DESC(v4l_bufsize, "Maximum size per V4L buffer (in kB)"); + +int jpg_nbufs = 32; +int jpg_bufsize = 512; /* max size for 100% quality full-PAL frame */ +module_param(jpg_nbufs, int, 0644); +MODULE_PARM_DESC(jpg_nbufs, "Maximum number of JPG buffers to use"); +module_param(jpg_bufsize, int, 0644); +MODULE_PARM_DESC(jpg_bufsize, "Maximum size per JPG buffer (in kB)"); + +int pass_through = 0; /* 1=Pass through TV signal when device is not used */ + /* 0=Show color bar when device is not used (LML33: only if lml33dpath=1) */ +module_param(pass_through, int, 0644); +MODULE_PARM_DESC(pass_through, + "Pass TV signal through to TV-out when idling"); + +int zr36067_debug = 1; +module_param_named(debug, zr36067_debug, int, 0644); +MODULE_PARM_DESC(debug, "Debug level (0-5)"); + +MODULE_DESCRIPTION("Zoran-36057/36067 JPEG codec driver"); +MODULE_AUTHOR("Serguei Miridonov"); +MODULE_LICENSE("GPL"); + +static struct pci_device_id zr36067_pci_tbl[] = { + {PCI_VENDOR_ID_ZORAN, PCI_DEVICE_ID_ZORAN_36057, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, + {0} +}; +MODULE_DEVICE_TABLE(pci, zr36067_pci_tbl); + +int zoran_num; /* number of Buzs in use */ +struct zoran *zoran[BUZ_MAX]; + +/* videocodec bus functions ZR36060 */ +static u32 +zr36060_read (struct videocodec *codec, + u16 reg) +{ + struct zoran *zr = (struct zoran *) codec->master_data->data; + __u32 data; + + if (post_office_wait(zr) + || post_office_write(zr, 0, 1, reg >> 8) + || post_office_write(zr, 0, 2, reg & 0xff)) { + return -1; + } + + data = post_office_read(zr, 0, 3) & 0xff; + return data; +} + +static void +zr36060_write (struct videocodec *codec, + u16 reg, + u32 val) +{ + struct zoran *zr = (struct zoran *) codec->master_data->data; + + if (post_office_wait(zr) + || post_office_write(zr, 0, 1, reg >> 8) + || post_office_write(zr, 0, 2, reg & 0xff)) { + return; + } + + post_office_write(zr, 0, 3, val & 0xff); +} + +/* videocodec bus functions ZR36050 */ +static u32 +zr36050_read (struct videocodec *codec, + u16 reg) +{ + struct zoran *zr = (struct zoran *) codec->master_data->data; + __u32 data; + + if (post_office_wait(zr) + || post_office_write(zr, 1, 0, reg >> 2)) { // reg. HIGHBYTES + return -1; + } + + data = post_office_read(zr, 0, reg & 0x03) & 0xff; // reg. LOWBYTES + read + return data; +} + +static void +zr36050_write (struct videocodec *codec, + u16 reg, + u32 val) +{ + struct zoran *zr = (struct zoran *) codec->master_data->data; + + if (post_office_wait(zr) + || post_office_write(zr, 1, 0, reg >> 2)) { // reg. HIGHBYTES + return; + } + + post_office_write(zr, 0, reg & 0x03, val & 0xff); // reg. LOWBYTES + wr. data +} + +/* videocodec bus functions ZR36016 */ +static u32 +zr36016_read (struct videocodec *codec, + u16 reg) +{ + struct zoran *zr = (struct zoran *) codec->master_data->data; + __u32 data; + + if (post_office_wait(zr)) { + return -1; + } + + data = post_office_read(zr, 2, reg & 0x03) & 0xff; // read + return data; +} + +/* hack for in zoran_device.c */ +void +zr36016_write (struct videocodec *codec, + u16 reg, + u32 val) +{ + struct zoran *zr = (struct zoran *) codec->master_data->data; + + if (post_office_wait(zr)) { + return; + } + + post_office_write(zr, 2, reg & 0x03, val & 0x0ff); // wr. data +} + +/* + * Board specific information + */ + +static void +dc10_init (struct zoran *zr) +{ + dprintk(3, KERN_DEBUG "%s: dc10_init()\n", ZR_DEVNAME(zr)); + + /* Pixel clock selection */ + GPIO(zr, 4, 0); + GPIO(zr, 5, 1); + /* Enable the video bus sync signals */ + GPIO(zr, 7, 0); +} + +static void +dc10plus_init (struct zoran *zr) +{ + dprintk(3, KERN_DEBUG "%s: dc10plus_init()\n", ZR_DEVNAME(zr)); +} + +static void +buz_init (struct zoran *zr) +{ + dprintk(3, KERN_DEBUG "%s: buz_init()\n", ZR_DEVNAME(zr)); + + /* some stuff from Iomega */ + pci_write_config_dword(zr->pci_dev, 0xfc, 0x90680f15); + pci_write_config_dword(zr->pci_dev, 0x0c, 0x00012020); + pci_write_config_dword(zr->pci_dev, 0xe8, 0xc0200000); +} + +static void +lml33_init (struct zoran *zr) +{ + dprintk(3, KERN_DEBUG "%s: lml33_init()\n", ZR_DEVNAME(zr)); + + GPIO(zr, 2, 1); // Set Composite input/output +} + +static void +avs6eyes_init (struct zoran *zr) +{ + // AverMedia 6-Eyes original driver by Christer Weinigel + + // Lifted straight from Christer's old driver and + // modified slightly by Martin Samuelsson. + + int mux = default_mux; /* 1 = BT866, 7 = VID1 */ + + GPIO(zr, 4, 1); /* Bt866 SLEEP on */ + udelay(2); + + GPIO(zr, 0, 1); /* ZR36060 /RESET on */ + GPIO(zr, 1, 0); /* ZR36060 /SLEEP on */ + GPIO(zr, 2, mux & 1); /* MUX S0 */ + GPIO(zr, 3, 0); /* /FRAME on */ + GPIO(zr, 4, 0); /* Bt866 SLEEP off */ + GPIO(zr, 5, mux & 2); /* MUX S1 */ + GPIO(zr, 6, 0); /* ? */ + GPIO(zr, 7, mux & 4); /* MUX S2 */ + +} + +static char * +i2cid_to_modulename (u16 i2c_id) +{ + char *name = NULL; + + switch (i2c_id) { + case I2C_DRIVERID_SAA7110: + name = "saa7110"; + break; + case I2C_DRIVERID_SAA7111A: + name = "saa7111"; + break; + case I2C_DRIVERID_SAA7114: + name = "saa7114"; + break; + case I2C_DRIVERID_SAA7185B: + name = "saa7185"; + break; + case I2C_DRIVERID_ADV7170: + name = "adv7170"; + break; + case I2C_DRIVERID_ADV7175: + name = "adv7175"; + break; + case I2C_DRIVERID_BT819: + name = "bt819"; + break; + case I2C_DRIVERID_BT856: + name = "bt856"; + break; + case I2C_DRIVERID_BT866: + name = "bt866"; + break; + case I2C_DRIVERID_VPX3220: + name = "vpx3220"; + break; + case I2C_DRIVERID_KS0127: + name = "ks0127"; + break; + } + + return name; +} + +static char * +codecid_to_modulename (u16 codecid) +{ + char *name = NULL; + + switch (codecid) { + case CODEC_TYPE_ZR36060: + name = "zr36060"; + break; + case CODEC_TYPE_ZR36050: + name = "zr36050"; + break; + case CODEC_TYPE_ZR36016: + name = "zr36016"; + break; + } + + return name; +} + +// struct tvnorm { +// u16 Wt, Wa, HStart, HSyncStart, Ht, Ha, VStart; +// }; + +static struct tvnorm f50sqpixel = { 944, 768, 83, 880, 625, 576, 16 }; +static struct tvnorm f60sqpixel = { 780, 640, 51, 716, 525, 480, 12 }; +static struct tvnorm f50ccir601 = { 864, 720, 75, 804, 625, 576, 18 }; +static struct tvnorm f60ccir601 = { 858, 720, 57, 788, 525, 480, 16 }; + +static struct tvnorm f50ccir601_lml33 = { 864, 720, 75+34, 804, 625, 576, 18 }; +static struct tvnorm f60ccir601_lml33 = { 858, 720, 57+34, 788, 525, 480, 16 }; + +/* The DC10 (57/16/50) uses VActive as HSync, so HStart must be 0 */ +static struct tvnorm f50sqpixel_dc10 = { 944, 768, 0, 880, 625, 576, 0 }; +static struct tvnorm f60sqpixel_dc10 = { 780, 640, 0, 716, 525, 480, 12 }; + +/* FIXME: I cannot swap U and V in saa7114, so i do one + * pixel left shift in zoran (75 -> 74) + * (Maxim Yevtyushkin ) */ +static struct tvnorm f50ccir601_lm33r10 = { 864, 720, 74+54, 804, 625, 576, 18 }; +static struct tvnorm f60ccir601_lm33r10 = { 858, 720, 56+54, 788, 525, 480, 16 }; + +/* FIXME: The ks0127 seem incapable of swapping U and V, too, which is why I + * copy Maxim's left shift hack for the 6 Eyes. + * + * Christer's driver used the unshifted norms, though... + * /Sam */ +static struct tvnorm f50ccir601_avs6eyes = { 864, 720, 74, 804, 625, 576, 18 }; +static struct tvnorm f60ccir601_avs6eyes = { 858, 720, 56, 788, 525, 480, 16 }; + +static struct card_info zoran_cards[NUM_CARDS] __devinitdata = { + { + .type = DC10_old, + .name = "DC10(old)", + .i2c_decoder = I2C_DRIVERID_VPX3220, + .video_codec = CODEC_TYPE_ZR36050, + .video_vfe = CODEC_TYPE_ZR36016, + + .inputs = 3, + .input = { + { 1, "Composite" }, + { 2, "S-Video" }, + { 0, "Internal/comp" } + }, + .norms = 3, + .tvn = { + &f50sqpixel_dc10, + &f60sqpixel_dc10, + &f50sqpixel_dc10 + }, + .jpeg_int = 0, + .vsync_int = ZR36057_ISR_GIRQ1, + .gpio = { 2, 1, -1, 3, 7, 0, 4, 5 }, + .gpio_pol = { 0, 0, 0, 1, 0, 0, 0, 0 }, + .gpcs = { -1, 0 }, + .vfe_pol = { 0, 0, 0, 0, 0, 0, 0, 0 }, + .gws_not_connected = 0, + .input_mux = 0, + .init = &dc10_init, + }, { + .type = DC10_new, + .name = "DC10(new)", + .i2c_decoder = I2C_DRIVERID_SAA7110, + .i2c_encoder = I2C_DRIVERID_ADV7175, + .video_codec = CODEC_TYPE_ZR36060, + + .inputs = 3, + .input = { + { 0, "Composite" }, + { 7, "S-Video" }, + { 5, "Internal/comp" } + }, + .norms = 3, + .tvn = { + &f50sqpixel, + &f60sqpixel, + &f50sqpixel}, + .jpeg_int = ZR36057_ISR_GIRQ0, + .vsync_int = ZR36057_ISR_GIRQ1, + .gpio = { 3, 0, 6, 1, 2, -1, 4, 5 }, + .gpio_pol = { 0, 0, 0, 0, 0, 0, 0, 0 }, + .gpcs = { -1, 1}, + .vfe_pol = { 1, 1, 1, 1, 0, 0, 0, 0 }, + .gws_not_connected = 0, + .input_mux = 0, + .init = &dc10plus_init, + }, { + .type = DC10plus, + .name = "DC10plus", + .vendor_id = PCI_VENDOR_ID_MIRO, + .device_id = PCI_DEVICE_ID_MIRO_DC10PLUS, + .i2c_decoder = I2C_DRIVERID_SAA7110, + .i2c_encoder = I2C_DRIVERID_ADV7175, + .video_codec = CODEC_TYPE_ZR36060, + + .inputs = 3, + .input = { + { 0, "Composite" }, + { 7, "S-Video" }, + { 5, "Internal/comp" } + }, + .norms = 3, + .tvn = { + &f50sqpixel, + &f60sqpixel, + &f50sqpixel + }, + .jpeg_int = ZR36057_ISR_GIRQ0, + .vsync_int = ZR36057_ISR_GIRQ1, + .gpio = { 3, 0, 6, 1, 2, -1, 4, 5 }, + .gpio_pol = { 0, 0, 0, 0, 0, 0, 0, 0 }, + .gpcs = { -1, 1 }, + .vfe_pol = { 1, 1, 1, 1, 0, 0, 0, 0 }, + .gws_not_connected = 0, + .input_mux = 0, + .init = &dc10plus_init, + }, { + .type = DC30, + .name = "DC30", + .i2c_decoder = I2C_DRIVERID_VPX3220, + .i2c_encoder = I2C_DRIVERID_ADV7175, + .video_codec = CODEC_TYPE_ZR36050, + .video_vfe = CODEC_TYPE_ZR36016, + + .inputs = 3, + .input = { + { 1, "Composite" }, + { 2, "S-Video" }, + { 0, "Internal/comp" } + }, + .norms = 3, + .tvn = { + &f50sqpixel_dc10, + &f60sqpixel_dc10, + &f50sqpixel_dc10 + }, + .jpeg_int = 0, + .vsync_int = ZR36057_ISR_GIRQ1, + .gpio = { 2, 1, -1, 3, 7, 0, 4, 5 }, + .gpio_pol = { 0, 0, 0, 1, 0, 0, 0, 0 }, + .gpcs = { -1, 0 }, + .vfe_pol = { 0, 0, 0, 0, 0, 0, 0, 0 }, + .gws_not_connected = 0, + .input_mux = 0, + .init = &dc10_init, + }, { + .type = DC30plus, + .name = "DC30plus", + .vendor_id = PCI_VENDOR_ID_MIRO, + .device_id = PCI_DEVICE_ID_MIRO_DC30PLUS, + .i2c_decoder = I2C_DRIVERID_VPX3220, + .i2c_encoder = I2C_DRIVERID_ADV7175, + .video_codec = CODEC_TYPE_ZR36050, + .video_vfe = CODEC_TYPE_ZR36016, + + .inputs = 3, + .input = { + { 1, "Composite" }, + { 2, "S-Video" }, + { 0, "Internal/comp" } + }, + .norms = 3, + .tvn = { + &f50sqpixel_dc10, + &f60sqpixel_dc10, + &f50sqpixel_dc10 + }, + .jpeg_int = 0, + .vsync_int = ZR36057_ISR_GIRQ1, + .gpio = { 2, 1, -1, 3, 7, 0, 4, 5 }, + .gpio_pol = { 0, 0, 0, 1, 0, 0, 0, 0 }, + .gpcs = { -1, 0 }, + .vfe_pol = { 0, 0, 0, 0, 0, 0, 0, 0 }, + .gws_not_connected = 0, + .input_mux = 0, + .init = &dc10_init, + }, { + .type = LML33, + .name = "LML33", + .i2c_decoder = I2C_DRIVERID_BT819, + .i2c_encoder = I2C_DRIVERID_BT856, + .video_codec = CODEC_TYPE_ZR36060, + + .inputs = 2, + .input = { + { 0, "Composite" }, + { 7, "S-Video" } + }, + .norms = 2, + .tvn = { + &f50ccir601_lml33, + &f60ccir601_lml33, + NULL + }, + .jpeg_int = ZR36057_ISR_GIRQ1, + .vsync_int = ZR36057_ISR_GIRQ0, + .gpio = { 1, -1, 3, 5, 7, -1, -1, -1 }, + .gpio_pol = { 0, 0, 0, 0, 1, 0, 0, 0 }, + .gpcs = { 3, 1 }, + .vfe_pol = { 1, 1, 0, 0, 0, 1, 0, 0 }, + .gws_not_connected = 1, + .input_mux = 0, + .init = &lml33_init, + }, { + .type = LML33R10, + .name = "LML33R10", + .vendor_id = PCI_VENDOR_ID_ELECTRONICDESIGNGMBH, + .device_id = PCI_DEVICE_ID_LML_33R10, + .i2c_decoder = I2C_DRIVERID_SAA7114, + .i2c_encoder = I2C_DRIVERID_ADV7170, + .video_codec = CODEC_TYPE_ZR36060, + + .inputs = 2, + .input = { + { 0, "Composite" }, + { 7, "S-Video" } + }, + .norms = 2, + .tvn = { + &f50ccir601_lm33r10, + &f60ccir601_lm33r10, + NULL + }, + .jpeg_int = ZR36057_ISR_GIRQ1, + .vsync_int = ZR36057_ISR_GIRQ0, + .gpio = { 1, -1, 3, 5, 7, -1, -1, -1 }, + .gpio_pol = { 0, 0, 0, 0, 1, 0, 0, 0 }, + .gpcs = { 3, 1 }, + .vfe_pol = { 1, 1, 0, 0, 0, 1, 0, 0 }, + .gws_not_connected = 1, + .input_mux = 0, + .init = &lml33_init, + }, { + .type = BUZ, + .name = "Buz", + .vendor_id = PCI_VENDOR_ID_IOMEGA, + .device_id = PCI_DEVICE_ID_IOMEGA_BUZ, + .i2c_decoder = I2C_DRIVERID_SAA7111A, + .i2c_encoder = I2C_DRIVERID_SAA7185B, + .video_codec = CODEC_TYPE_ZR36060, + + .inputs = 2, + .input = { + { 3, "Composite" }, + { 7, "S-Video" } + }, + .norms = 3, + .tvn = { + &f50ccir601, + &f60ccir601, + &f50ccir601 + }, + .jpeg_int = ZR36057_ISR_GIRQ1, + .vsync_int = ZR36057_ISR_GIRQ0, + .gpio = { 1, -1, 3, -1, -1, -1, -1, -1 }, + .gpio_pol = { 0, 0, 0, 0, 0, 0, 0, 0 }, + .gpcs = { 3, 1 }, + .vfe_pol = { 1, 1, 0, 0, 0, 1, 0, 0 }, + .gws_not_connected = 1, + .input_mux = 0, + .init = &buz_init, + }, { + .type = AVS6EYES, + .name = "6-Eyes", + /* AverMedia chose not to brand the 6-Eyes. Thus it + can't be autodetected, and requires card=x. */ + .vendor_id = -1, + .device_id = -1, + .i2c_decoder = I2C_DRIVERID_KS0127, + .i2c_encoder = I2C_DRIVERID_BT866, + .video_codec = CODEC_TYPE_ZR36060, + + .inputs = 10, + .input = { + { 0, "Composite 1" }, + { 1, "Composite 2" }, + { 2, "Composite 3" }, + { 4, "Composite 4" }, + { 5, "Composite 5" }, + { 6, "Composite 6" }, + { 8, "S-Video 1" }, + { 9, "S-Video 2" }, + {10, "S-Video 3" }, + {15, "YCbCr" } + }, + .norms = 2, + .tvn = { + &f50ccir601_avs6eyes, + &f60ccir601_avs6eyes, + NULL + }, + .jpeg_int = ZR36057_ISR_GIRQ1, + .vsync_int = ZR36057_ISR_GIRQ0, + .gpio = { 1, 0, 3, -1, -1, -1, -1, -1 },// Validity unknown /Sam + .gpio_pol = { 0, 0, 0, 0, 0, 0, 0, 0 }, // Validity unknown /Sam + .gpcs = { 3, 1 }, // Validity unknown /Sam + .vfe_pol = { 1, 0, 0, 0, 0, 1, 0, 0 }, // Validity unknown /Sam + .gws_not_connected = 1, + .input_mux = 1, + .init = &avs6eyes_init, + } + +}; + +/* + * I2C functions + */ +/* software I2C functions */ +static int +zoran_i2c_getsda (void *data) +{ + struct zoran *zr = (struct zoran *) data; + + return (btread(ZR36057_I2CBR) >> 1) & 1; +} + +static int +zoran_i2c_getscl (void *data) +{ + struct zoran *zr = (struct zoran *) data; + + return btread(ZR36057_I2CBR) & 1; +} + +static void +zoran_i2c_setsda (void *data, + int state) +{ + struct zoran *zr = (struct zoran *) data; + + if (state) + zr->i2cbr |= 2; + else + zr->i2cbr &= ~2; + btwrite(zr->i2cbr, ZR36057_I2CBR); +} + +static void +zoran_i2c_setscl (void *data, + int state) +{ + struct zoran *zr = (struct zoran *) data; + + if (state) + zr->i2cbr |= 1; + else + zr->i2cbr &= ~1; + btwrite(zr->i2cbr, ZR36057_I2CBR); +} + +static int +zoran_i2c_client_register (struct i2c_client *client) +{ + struct zoran *zr = (struct zoran *) i2c_get_adapdata(client->adapter); + int res = 0; + + dprintk(2, + KERN_DEBUG "%s: i2c_client_register() - driver id = %d\n", + ZR_DEVNAME(zr), client->driver->id); + + mutex_lock(&zr->resource_lock); + + if (zr->user > 0) { + /* we're already busy, so we keep a reference to + * them... Could do a lot of stuff here, but this + * is easiest. (Did I ever mention I'm a lazy ass?) + */ + res = -EBUSY; + goto clientreg_unlock_and_return; + } + + if (client->driver->id == zr->card.i2c_decoder) + zr->decoder = client; + else if (client->driver->id == zr->card.i2c_encoder) + zr->encoder = client; + else { + res = -ENODEV; + goto clientreg_unlock_and_return; + } + +clientreg_unlock_and_return: + mutex_unlock(&zr->resource_lock); + + return res; +} + +static int +zoran_i2c_client_unregister (struct i2c_client *client) +{ + struct zoran *zr = (struct zoran *) i2c_get_adapdata(client->adapter); + int res = 0; + + dprintk(2, KERN_DEBUG "%s: i2c_client_unregister()\n", ZR_DEVNAME(zr)); + + mutex_lock(&zr->resource_lock); + + if (zr->user > 0) { + res = -EBUSY; + goto clientunreg_unlock_and_return; + } + + /* try to locate it */ + if (client == zr->encoder) { + zr->encoder = NULL; + } else if (client == zr->decoder) { + zr->decoder = NULL; + snprintf(ZR_DEVNAME(zr), sizeof(ZR_DEVNAME(zr)), "MJPEG[%d]", zr->id); + } +clientunreg_unlock_and_return: + mutex_unlock(&zr->resource_lock); + return res; +} + +static const struct i2c_algo_bit_data zoran_i2c_bit_data_template = { + .setsda = zoran_i2c_setsda, + .setscl = zoran_i2c_setscl, + .getsda = zoran_i2c_getsda, + .getscl = zoran_i2c_getscl, + .udelay = 10, + .timeout = 100, +}; + +static int +zoran_register_i2c (struct zoran *zr) +{ + memcpy(&zr->i2c_algo, &zoran_i2c_bit_data_template, + sizeof(struct i2c_algo_bit_data)); + zr->i2c_algo.data = zr; + zr->i2c_adapter.id = I2C_HW_B_ZR36067; + zr->i2c_adapter.client_register = zoran_i2c_client_register; + zr->i2c_adapter.client_unregister = zoran_i2c_client_unregister; + strlcpy(zr->i2c_adapter.name, ZR_DEVNAME(zr), + sizeof(zr->i2c_adapter.name)); + i2c_set_adapdata(&zr->i2c_adapter, zr); + zr->i2c_adapter.algo_data = &zr->i2c_algo; + zr->i2c_adapter.dev.parent = &zr->pci_dev->dev; + return i2c_bit_add_bus(&zr->i2c_adapter); +} + +static void +zoran_unregister_i2c (struct zoran *zr) +{ + i2c_del_adapter(&zr->i2c_adapter); +} + +/* Check a zoran_params struct for correctness, insert default params */ + +int +zoran_check_jpg_settings (struct zoran *zr, + struct zoran_jpg_settings *settings) +{ + int err = 0, err0 = 0; + + dprintk(4, + KERN_DEBUG + "%s: check_jpg_settings() - dec: %d, Hdcm: %d, Vdcm: %d, Tdcm: %d\n", + ZR_DEVNAME(zr), settings->decimation, settings->HorDcm, + settings->VerDcm, settings->TmpDcm); + dprintk(4, + KERN_DEBUG + "%s: check_jpg_settings() - x: %d, y: %d, w: %d, y: %d\n", + ZR_DEVNAME(zr), settings->img_x, settings->img_y, + settings->img_width, settings->img_height); + /* Check decimation, set default values for decimation = 1, 2, 4 */ + switch (settings->decimation) { + case 1: + + settings->HorDcm = 1; + settings->VerDcm = 1; + settings->TmpDcm = 1; + settings->field_per_buff = 2; + settings->img_x = 0; + settings->img_y = 0; + settings->img_width = BUZ_MAX_WIDTH; + settings->img_height = BUZ_MAX_HEIGHT / 2; + break; + case 2: + + settings->HorDcm = 2; + settings->VerDcm = 1; + settings->TmpDcm = 2; + settings->field_per_buff = 1; + settings->img_x = (BUZ_MAX_WIDTH == 720) ? 8 : 0; + settings->img_y = 0; + settings->img_width = + (BUZ_MAX_WIDTH == 720) ? 704 : BUZ_MAX_WIDTH; + settings->img_height = BUZ_MAX_HEIGHT / 2; + break; + case 4: + + if (zr->card.type == DC10_new) { + dprintk(1, + KERN_DEBUG + "%s: check_jpg_settings() - HDec by 4 is not supported on the DC10\n", + ZR_DEVNAME(zr)); + err0++; + break; + } + + settings->HorDcm = 4; + settings->VerDcm = 2; + settings->TmpDcm = 2; + settings->field_per_buff = 1; + settings->img_x = (BUZ_MAX_WIDTH == 720) ? 8 : 0; + settings->img_y = 0; + settings->img_width = + (BUZ_MAX_WIDTH == 720) ? 704 : BUZ_MAX_WIDTH; + settings->img_height = BUZ_MAX_HEIGHT / 2; + break; + case 0: + + /* We have to check the data the user has set */ + + if (settings->HorDcm != 1 && settings->HorDcm != 2 && + (zr->card.type == DC10_new || settings->HorDcm != 4)) + err0++; + if (settings->VerDcm != 1 && settings->VerDcm != 2) + err0++; + if (settings->TmpDcm != 1 && settings->TmpDcm != 2) + err0++; + if (settings->field_per_buff != 1 && + settings->field_per_buff != 2) + err0++; + if (settings->img_x < 0) + err0++; + if (settings->img_y < 0) + err0++; + if (settings->img_width < 0) + err0++; + if (settings->img_height < 0) + err0++; + if (settings->img_x + settings->img_width > BUZ_MAX_WIDTH) + err0++; + if (settings->img_y + settings->img_height > + BUZ_MAX_HEIGHT / 2) + err0++; + if (settings->HorDcm && settings->VerDcm) { + if (settings->img_width % + (16 * settings->HorDcm) != 0) + err0++; + if (settings->img_height % + (8 * settings->VerDcm) != 0) + err0++; + } + + if (err0) { + dprintk(1, + KERN_ERR + "%s: check_jpg_settings() - error in params for decimation = 0\n", + ZR_DEVNAME(zr)); + err++; + } + break; + default: + dprintk(1, + KERN_ERR + "%s: check_jpg_settings() - decimation = %d, must be 0, 1, 2 or 4\n", + ZR_DEVNAME(zr), settings->decimation); + err++; + break; + } + + if (settings->jpg_comp.quality > 100) + settings->jpg_comp.quality = 100; + if (settings->jpg_comp.quality < 5) + settings->jpg_comp.quality = 5; + if (settings->jpg_comp.APPn < 0) + settings->jpg_comp.APPn = 0; + if (settings->jpg_comp.APPn > 15) + settings->jpg_comp.APPn = 15; + if (settings->jpg_comp.APP_len < 0) + settings->jpg_comp.APP_len = 0; + if (settings->jpg_comp.APP_len > 60) + settings->jpg_comp.APP_len = 60; + if (settings->jpg_comp.COM_len < 0) + settings->jpg_comp.COM_len = 0; + if (settings->jpg_comp.COM_len > 60) + settings->jpg_comp.COM_len = 60; + if (err) + return -EINVAL; + return 0; +} + +void +zoran_open_init_params (struct zoran *zr) +{ + int i; + + /* User must explicitly set a window */ + zr->overlay_settings.is_set = 0; + zr->overlay_mask = NULL; + zr->overlay_active = ZORAN_FREE; + + zr->v4l_memgrab_active = 0; + zr->v4l_overlay_active = 0; + zr->v4l_grab_frame = NO_GRAB_ACTIVE; + zr->v4l_grab_seq = 0; + zr->v4l_settings.width = 192; + zr->v4l_settings.height = 144; + zr->v4l_settings.format = &zoran_formats[7]; /* YUY2 - YUV-4:2:2 packed */ + zr->v4l_settings.bytesperline = + zr->v4l_settings.width * + ((zr->v4l_settings.format->depth + 7) / 8); + + /* DMA ring stuff for V4L */ + zr->v4l_pend_tail = 0; + zr->v4l_pend_head = 0; + zr->v4l_sync_tail = 0; + zr->v4l_buffers.active = ZORAN_FREE; + for (i = 0; i < VIDEO_MAX_FRAME; i++) { + zr->v4l_buffers.buffer[i].state = BUZ_STATE_USER; /* nothing going on */ + } + zr->v4l_buffers.allocated = 0; + + for (i = 0; i < BUZ_MAX_FRAME; i++) { + zr->jpg_buffers.buffer[i].state = BUZ_STATE_USER; /* nothing going on */ + } + zr->jpg_buffers.active = ZORAN_FREE; + zr->jpg_buffers.allocated = 0; + /* Set necessary params and call zoran_check_jpg_settings to set the defaults */ + zr->jpg_settings.decimation = 1; + zr->jpg_settings.jpg_comp.quality = 50; /* default compression factor 8 */ + if (zr->card.type != BUZ) + zr->jpg_settings.odd_even = 1; + else + zr->jpg_settings.odd_even = 0; + zr->jpg_settings.jpg_comp.APPn = 0; + zr->jpg_settings.jpg_comp.APP_len = 0; /* No APPn marker */ + memset(zr->jpg_settings.jpg_comp.APP_data, 0, + sizeof(zr->jpg_settings.jpg_comp.APP_data)); + zr->jpg_settings.jpg_comp.COM_len = 0; /* No COM marker */ + memset(zr->jpg_settings.jpg_comp.COM_data, 0, + sizeof(zr->jpg_settings.jpg_comp.COM_data)); + zr->jpg_settings.jpg_comp.jpeg_markers = + JPEG_MARKER_DHT | JPEG_MARKER_DQT; + i = zoran_check_jpg_settings(zr, &zr->jpg_settings); + if (i) + dprintk(1, + KERN_ERR + "%s: zoran_open_init_params() internal error\n", + ZR_DEVNAME(zr)); + + clear_interrupt_counters(zr); + zr->testing = 0; +} + +static void __devinit +test_interrupts (struct zoran *zr) +{ + DEFINE_WAIT(wait); + int timeout, icr; + + clear_interrupt_counters(zr); + + zr->testing = 1; + icr = btread(ZR36057_ICR); + btwrite(0x78000000 | ZR36057_ICR_IntPinEn, ZR36057_ICR); + prepare_to_wait(&zr->test_q, &wait, TASK_INTERRUPTIBLE); + timeout = schedule_timeout(HZ); + finish_wait(&zr->test_q, &wait); + btwrite(0, ZR36057_ICR); + btwrite(0x78000000, ZR36057_ISR); + zr->testing = 0; + dprintk(5, KERN_INFO "%s: Testing interrupts...\n", ZR_DEVNAME(zr)); + if (timeout) { + dprintk(1, ": time spent: %d\n", 1 * HZ - timeout); + } + if (zr36067_debug > 1) + print_interrupts(zr); + btwrite(icr, ZR36057_ICR); +} + +static int __devinit +zr36057_init (struct zoran *zr) +{ + int j, err; + int two = 2; + int zero = 0; + + dprintk(1, + KERN_INFO + "%s: zr36057_init() - initializing card[%d], zr=%p\n", + ZR_DEVNAME(zr), zr->id, zr); + + /* default setup of all parameters which will persist between opens */ + zr->user = 0; + + init_waitqueue_head(&zr->v4l_capq); + init_waitqueue_head(&zr->jpg_capq); + init_waitqueue_head(&zr->test_q); + zr->jpg_buffers.allocated = 0; + zr->v4l_buffers.allocated = 0; + + zr->buffer.base = (void *) vidmem; + zr->buffer.width = 0; + zr->buffer.height = 0; + zr->buffer.depth = 0; + zr->buffer.bytesperline = 0; + + /* Avoid nonsense settings from user for default input/norm */ + if (default_norm < VIDEO_MODE_PAL && + default_norm > VIDEO_MODE_SECAM) + default_norm = VIDEO_MODE_PAL; + zr->norm = default_norm; + if (!(zr->timing = zr->card.tvn[zr->norm])) { + dprintk(1, + KERN_WARNING + "%s: zr36057_init() - default TV standard not supported by hardware. PAL will be used.\n", + ZR_DEVNAME(zr)); + zr->norm = VIDEO_MODE_PAL; + zr->timing = zr->card.tvn[zr->norm]; + } + + if (default_input > zr->card.inputs-1) { + dprintk(1, + KERN_WARNING + "%s: default_input value %d out of range (0-%d)\n", + ZR_DEVNAME(zr), default_input, zr->card.inputs-1); + default_input = 0; + } + zr->input = default_input; + + /* Should the following be reset at every open ? */ + zr->hue = 32768; + zr->contrast = 32768; + zr->saturation = 32768; + zr->brightness = 32768; + + /* default setup (will be repeated at every open) */ + zoran_open_init_params(zr); + + /* allocate memory *before* doing anything to the hardware + * in case allocation fails */ + zr->stat_com = kzalloc(BUZ_NUM_STAT_COM * 4, GFP_KERNEL); + zr->video_dev = kmalloc(sizeof(struct video_device), GFP_KERNEL); + if (!zr->stat_com || !zr->video_dev) { + dprintk(1, + KERN_ERR + "%s: zr36057_init() - kmalloc (STAT_COM) failed\n", + ZR_DEVNAME(zr)); + err = -ENOMEM; + goto exit_free; + } + for (j = 0; j < BUZ_NUM_STAT_COM; j++) { + zr->stat_com[j] = cpu_to_le32(1); /* mark as unavailable to zr36057 */ + } + + /* + * Now add the template and register the device unit. + */ + memcpy(zr->video_dev, &zoran_template, sizeof(zoran_template)); + strcpy(zr->video_dev->name, ZR_DEVNAME(zr)); + err = video_register_device(zr->video_dev, VFL_TYPE_GRABBER, video_nr[zr->id]); + if (err < 0) + goto exit_unregister; + + zoran_init_hardware(zr); + if (zr36067_debug > 2) + detect_guest_activity(zr); + test_interrupts(zr); + if (!pass_through) { + decoder_command(zr, DECODER_ENABLE_OUTPUT, &zero); + encoder_command(zr, ENCODER_SET_INPUT, &two); + } + + zr->zoran_proc = NULL; + zr->initialized = 1; + return 0; + +exit_unregister: + zoran_unregister_i2c(zr); +exit_free: + kfree(zr->stat_com); + kfree(zr->video_dev); + return err; +} + +static void +zoran_release (struct zoran *zr) +{ + if (!zr->initialized) + goto exit_free; + /* unregister videocodec bus */ + if (zr->codec) { + struct videocodec_master *master = zr->codec->master_data; + + videocodec_detach(zr->codec); + kfree(master); + } + if (zr->vfe) { + struct videocodec_master *master = zr->vfe->master_data; + + videocodec_detach(zr->vfe); + kfree(master); + } + + /* unregister i2c bus */ + zoran_unregister_i2c(zr); + /* disable PCI bus-mastering */ + zoran_set_pci_master(zr, 0); + /* put chip into reset */ + btwrite(0, ZR36057_SPGPPCR); + free_irq(zr->pci_dev->irq, zr); + /* unmap and free memory */ + kfree(zr->stat_com); + zoran_proc_cleanup(zr); + iounmap(zr->zr36057_mem); + pci_disable_device(zr->pci_dev); + video_unregister_device(zr->video_dev); +exit_free: + kfree(zr); +} + +void +zoran_vdev_release (struct video_device *vdev) +{ + kfree(vdev); +} + +static struct videocodec_master * __devinit +zoran_setup_videocodec (struct zoran *zr, + int type) +{ + struct videocodec_master *m = NULL; + + m = kmalloc(sizeof(struct videocodec_master), GFP_KERNEL); + if (!m) { + dprintk(1, + KERN_ERR + "%s: zoran_setup_videocodec() - no memory\n", + ZR_DEVNAME(zr)); + return m; + } + + /* magic and type are unused for master struct. Makes sense only at + codec structs. + In the past, .type were initialized to the old V4L1 .hardware + value, as VID_HARDWARE_ZR36067 + */ + m->magic = 0L; + m->type = 0; + + m->flags = CODEC_FLAG_ENCODER | CODEC_FLAG_DECODER; + strncpy(m->name, ZR_DEVNAME(zr), sizeof(m->name)); + m->data = zr; + + switch (type) + { + case CODEC_TYPE_ZR36060: + m->readreg = zr36060_read; + m->writereg = zr36060_write; + m->flags |= CODEC_FLAG_JPEG | CODEC_FLAG_VFE; + break; + case CODEC_TYPE_ZR36050: + m->readreg = zr36050_read; + m->writereg = zr36050_write; + m->flags |= CODEC_FLAG_JPEG; + break; + case CODEC_TYPE_ZR36016: + m->readreg = zr36016_read; + m->writereg = zr36016_write; + m->flags |= CODEC_FLAG_VFE; + break; + } + + return m; +} + +/* + * Scan for a Buz card (actually for the PCI controller ZR36057), + * request the irq and map the io memory + */ +static int __devinit +find_zr36057 (void) +{ + unsigned char latency, need_latency; + struct zoran *zr; + struct pci_dev *dev = NULL; + int result; + struct videocodec_master *master_vfe = NULL; + struct videocodec_master *master_codec = NULL; + int card_num; + char *i2c_enc_name, *i2c_dec_name, *codec_name, *vfe_name; + + zoran_num = 0; + while (zoran_num < BUZ_MAX && + (dev = pci_get_device(PCI_VENDOR_ID_ZORAN, PCI_DEVICE_ID_ZORAN_36057, dev)) != NULL) { + card_num = card[zoran_num]; + zr = kzalloc(sizeof(struct zoran), GFP_KERNEL); + if (!zr) { + dprintk(1, + KERN_ERR + "%s: find_zr36057() - kzalloc failed\n", + ZORAN_NAME); + continue; + } + zr->pci_dev = dev; + //zr->zr36057_mem = NULL; + zr->id = zoran_num; + snprintf(ZR_DEVNAME(zr), sizeof(ZR_DEVNAME(zr)), "MJPEG[%u]", zr->id); + spin_lock_init(&zr->spinlock); + mutex_init(&zr->resource_lock); + if (pci_enable_device(dev)) + goto zr_free_mem; + zr->zr36057_adr = pci_resource_start(zr->pci_dev, 0); + pci_read_config_byte(zr->pci_dev, PCI_CLASS_REVISION, + &zr->revision); + if (zr->revision < 2) { + dprintk(1, + KERN_INFO + "%s: Zoran ZR36057 (rev %d) irq: %d, memory: 0x%08x.\n", + ZR_DEVNAME(zr), zr->revision, zr->pci_dev->irq, + zr->zr36057_adr); + + if (card_num == -1) { + dprintk(1, + KERN_ERR + "%s: find_zr36057() - no card specified, please use the card=X insmod option\n", + ZR_DEVNAME(zr)); + goto zr_free_mem; + } + } else { + int i; + unsigned short ss_vendor, ss_device; + + ss_vendor = zr->pci_dev->subsystem_vendor; + ss_device = zr->pci_dev->subsystem_device; + dprintk(1, + KERN_INFO + "%s: Zoran ZR36067 (rev %d) irq: %d, memory: 0x%08x\n", + ZR_DEVNAME(zr), zr->revision, zr->pci_dev->irq, + zr->zr36057_adr); + dprintk(1, + KERN_INFO + "%s: subsystem vendor=0x%04x id=0x%04x\n", + ZR_DEVNAME(zr), ss_vendor, ss_device); + if (card_num == -1) { + dprintk(3, + KERN_DEBUG + "%s: find_zr36057() - trying to autodetect card type\n", + ZR_DEVNAME(zr)); + for (i=0;i= NUM_CARDS) { + dprintk(2, + KERN_ERR + "%s: find_zr36057() - invalid cardnum %d\n", + ZR_DEVNAME(zr), card_num); + goto zr_free_mem; + } + + /* even though we make this a non pointer and thus + * theoretically allow for making changes to this struct + * on a per-individual card basis at runtime, this is + * strongly discouraged. This structure is intended to + * keep general card information, no settings or anything */ + zr->card = zoran_cards[card_num]; + snprintf(ZR_DEVNAME(zr), sizeof(ZR_DEVNAME(zr)), + "%s[%u]", zr->card.name, zr->id); + + zr->zr36057_mem = ioremap_nocache(zr->zr36057_adr, 0x1000); + if (!zr->zr36057_mem) { + dprintk(1, + KERN_ERR + "%s: find_zr36057() - ioremap failed\n", + ZR_DEVNAME(zr)); + goto zr_free_mem; + } + + result = request_irq(zr->pci_dev->irq, + zoran_irq, + IRQF_SHARED | IRQF_DISABLED, + ZR_DEVNAME(zr), + (void *) zr); + if (result < 0) { + if (result == -EINVAL) { + dprintk(1, + KERN_ERR + "%s: find_zr36057() - bad irq number or handler\n", + ZR_DEVNAME(zr)); + } else if (result == -EBUSY) { + dprintk(1, + KERN_ERR + "%s: find_zr36057() - IRQ %d busy, change your PnP config in BIOS\n", + ZR_DEVNAME(zr), zr->pci_dev->irq); + } else { + dprintk(1, + KERN_ERR + "%s: find_zr36057() - can't assign irq, error code %d\n", + ZR_DEVNAME(zr), result); + } + goto zr_unmap; + } + + /* set PCI latency timer */ + pci_read_config_byte(zr->pci_dev, PCI_LATENCY_TIMER, + &latency); + need_latency = zr->revision > 1 ? 32 : 48; + if (latency != need_latency) { + dprintk(2, + KERN_INFO + "%s: Changing PCI latency from %d to %d.\n", + ZR_DEVNAME(zr), latency, need_latency); + pci_write_config_byte(zr->pci_dev, + PCI_LATENCY_TIMER, + need_latency); + } + + zr36057_restart(zr); + /* i2c */ + dprintk(2, KERN_INFO "%s: Initializing i2c bus...\n", + ZR_DEVNAME(zr)); + + /* i2c decoder */ + if (decoder[zr->id] != -1) { + i2c_dec_name = i2cid_to_modulename(decoder[zr->id]); + zr->card.i2c_decoder = decoder[zr->id]; + } else if (zr->card.i2c_decoder != 0) { + i2c_dec_name = + i2cid_to_modulename(zr->card.i2c_decoder); + } else { + i2c_dec_name = NULL; + } + + if (i2c_dec_name) { + if ((result = request_module(i2c_dec_name)) < 0) { + dprintk(1, + KERN_ERR + "%s: failed to load module %s: %d\n", + ZR_DEVNAME(zr), i2c_dec_name, result); + } + } + + /* i2c encoder */ + if (encoder[zr->id] != -1) { + i2c_enc_name = i2cid_to_modulename(encoder[zr->id]); + zr->card.i2c_encoder = encoder[zr->id]; + } else if (zr->card.i2c_encoder != 0) { + i2c_enc_name = + i2cid_to_modulename(zr->card.i2c_encoder); + } else { + i2c_enc_name = NULL; + } + + if (i2c_enc_name) { + if ((result = request_module(i2c_enc_name)) < 0) { + dprintk(1, + KERN_ERR + "%s: failed to load module %s: %d\n", + ZR_DEVNAME(zr), i2c_enc_name, result); + } + } + + if (zoran_register_i2c(zr) < 0) { + dprintk(1, + KERN_ERR + "%s: find_zr36057() - can't initialize i2c bus\n", + ZR_DEVNAME(zr)); + goto zr_free_irq; + } + + dprintk(2, + KERN_INFO "%s: Initializing videocodec bus...\n", + ZR_DEVNAME(zr)); + + if (zr->card.video_codec != 0 && + (codec_name = + codecid_to_modulename(zr->card.video_codec)) != NULL) { + if ((result = request_module(codec_name)) < 0) { + dprintk(1, + KERN_ERR + "%s: failed to load modules %s: %d\n", + ZR_DEVNAME(zr), codec_name, result); + } + } + if (zr->card.video_vfe != 0 && + (vfe_name = + codecid_to_modulename(zr->card.video_vfe)) != NULL) { + if ((result = request_module(vfe_name)) < 0) { + dprintk(1, + KERN_ERR + "%s: failed to load modules %s: %d\n", + ZR_DEVNAME(zr), vfe_name, result); + } + } + + /* reset JPEG codec */ + jpeg_codec_sleep(zr, 1); + jpeg_codec_reset(zr); + /* video bus enabled */ + /* display codec revision */ + if (zr->card.video_codec != 0) { + master_codec = zoran_setup_videocodec(zr, + zr->card.video_codec); + if (!master_codec) + goto zr_unreg_i2c; + zr->codec = videocodec_attach(master_codec); + if (!zr->codec) { + dprintk(1, + KERN_ERR + "%s: find_zr36057() - no codec found\n", + ZR_DEVNAME(zr)); + goto zr_free_codec; + } + if (zr->codec->type != zr->card.video_codec) { + dprintk(1, + KERN_ERR + "%s: find_zr36057() - wrong codec\n", + ZR_DEVNAME(zr)); + goto zr_detach_codec; + } + } + if (zr->card.video_vfe != 0) { + master_vfe = zoran_setup_videocodec(zr, + zr->card.video_vfe); + if (!master_vfe) + goto zr_detach_codec; + zr->vfe = videocodec_attach(master_vfe); + if (!zr->vfe) { + dprintk(1, + KERN_ERR + "%s: find_zr36057() - no VFE found\n", + ZR_DEVNAME(zr)); + goto zr_free_vfe; + } + if (zr->vfe->type != zr->card.video_vfe) { + dprintk(1, + KERN_ERR + "%s: find_zr36057() = wrong VFE\n", + ZR_DEVNAME(zr)); + goto zr_detach_vfe; + } + } + /* Success so keep the pci_dev referenced */ + pci_dev_get(zr->pci_dev); + zoran[zoran_num++] = zr; + continue; + + // Init errors + zr_detach_vfe: + videocodec_detach(zr->vfe); + zr_free_vfe: + kfree(master_vfe); + zr_detach_codec: + videocodec_detach(zr->codec); + zr_free_codec: + kfree(master_codec); + zr_unreg_i2c: + zoran_unregister_i2c(zr); + zr_free_irq: + btwrite(0, ZR36057_SPGPPCR); + free_irq(zr->pci_dev->irq, zr); + zr_unmap: + iounmap(zr->zr36057_mem); + zr_free_mem: + kfree(zr); + continue; + } + if (dev) /* Clean up ref count on early exit */ + pci_dev_put(dev); + + if (zoran_num == 0) { + dprintk(1, KERN_INFO "No known MJPEG cards found.\n"); + } + return zoran_num; +} + +static int __init +init_dc10_cards (void) +{ + int i; + + memset(zoran, 0, sizeof(zoran)); + printk(KERN_INFO "Zoran MJPEG board driver version %d.%d.%d\n", + MAJOR_VERSION, MINOR_VERSION, RELEASE_VERSION); + + /* Look for cards */ + if (find_zr36057() < 0) { + return -EIO; + } + if (zoran_num == 0) + return -ENODEV; + dprintk(1, KERN_INFO "%s: %d card(s) found\n", ZORAN_NAME, + zoran_num); + /* check the parameters we have been given, adjust if necessary */ + if (v4l_nbufs < 2) + v4l_nbufs = 2; + if (v4l_nbufs > VIDEO_MAX_FRAME) + v4l_nbufs = VIDEO_MAX_FRAME; + /* The user specfies the in KB, we want them in byte + * (and page aligned) */ + v4l_bufsize = PAGE_ALIGN(v4l_bufsize * 1024); + if (v4l_bufsize < 32768) + v4l_bufsize = 32768; + /* 2 MB is arbitrary but sufficient for the maximum possible images */ + if (v4l_bufsize > 2048 * 1024) + v4l_bufsize = 2048 * 1024; + if (jpg_nbufs < 4) + jpg_nbufs = 4; + if (jpg_nbufs > BUZ_MAX_FRAME) + jpg_nbufs = BUZ_MAX_FRAME; + jpg_bufsize = PAGE_ALIGN(jpg_bufsize * 1024); + if (jpg_bufsize < 8192) + jpg_bufsize = 8192; + if (jpg_bufsize > (512 * 1024)) + jpg_bufsize = 512 * 1024; + /* Use parameter for vidmem or try to find a video card */ + if (vidmem) { + dprintk(1, + KERN_INFO + "%s: Using supplied video memory base address @ 0x%lx\n", + ZORAN_NAME, vidmem); + } + + /* random nonsense */ + dprintk(6, KERN_DEBUG "Jotti is een held!\n"); + + /* some mainboards might not do PCI-PCI data transfer well */ + if (pci_pci_problems & (PCIPCI_FAIL|PCIAGP_FAIL|PCIPCI_ALIMAGIK)) { + dprintk(1, + KERN_WARNING + "%s: chipset does not support reliable PCI-PCI DMA\n", + ZORAN_NAME); + } + + /* take care of Natoma chipset and a revision 1 zr36057 */ + for (i = 0; i < zoran_num; i++) { + struct zoran *zr = zoran[i]; + + if ((pci_pci_problems & PCIPCI_NATOMA) && zr->revision <= 1) { + zr->jpg_buffers.need_contiguous = 1; + dprintk(1, + KERN_INFO + "%s: ZR36057/Natoma bug, max. buffer size is 128K\n", + ZR_DEVNAME(zr)); + } + + if (zr36057_init(zr) < 0) { + for (i = 0; i < zoran_num; i++) + zoran_release(zoran[i]); + return -EIO; + } + zoran_proc_init(zr); + } + + return 0; +} + +static void __exit +unload_dc10_cards (void) +{ + int i; + + for (i = 0; i < zoran_num; i++) + zoran_release(zoran[i]); +} + +module_init(init_dc10_cards); +module_exit(unload_dc10_cards); diff --git a/drivers/media/video/zoran/zoran_card.h b/drivers/media/video/zoran/zoran_card.h new file mode 100644 index 0000000..e4dc9d2 --- /dev/null +++ b/drivers/media/video/zoran/zoran_card.h @@ -0,0 +1,55 @@ +/* + * Zoran zr36057/zr36067 PCI controller driver, for the + * Pinnacle/Miro DC10/DC10+/DC30/DC30+, Iomega Buz, Linux + * Media Labs LML33/LML33R10. + * + * This part handles card-specific data and detection + * + * Copyright (C) 2000 Serguei Miridonov + * + * Currently maintained by: + * Ronald Bultje + * Laurent Pinchart + * Mailinglist + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef __ZORAN_CARD_H__ +#define __ZORAN_CARD_H__ + +extern int zr36067_debug; + +#define dprintk(num, format, args...) \ + do { \ + if (zr36067_debug >= num) \ + printk(format, ##args); \ + } while (0) + +/* Anybody who uses more than four? */ +#define BUZ_MAX 4 +extern int zoran_num; +extern struct zoran *zoran[BUZ_MAX]; + +extern struct video_device zoran_template; + +extern int zoran_check_jpg_settings(struct zoran *zr, + struct zoran_jpg_settings *settings); +extern void zoran_open_init_params(struct zoran *zr); +extern void zoran_vdev_release(struct video_device *vdev); + +void zr36016_write(struct videocodec *codec, u16 reg, u32 val); + +#endif /* __ZORAN_CARD_H__ */ diff --git a/drivers/media/video/zoran/zoran_device.c b/drivers/media/video/zoran/zoran_device.c new file mode 100644 index 0000000..5d948ff --- /dev/null +++ b/drivers/media/video/zoran/zoran_device.c @@ -0,0 +1,1747 @@ +/* + * Zoran zr36057/zr36067 PCI controller driver, for the + * Pinnacle/Miro DC10/DC10+/DC30/DC30+, Iomega Buz, Linux + * Media Labs LML33/LML33R10. + * + * This part handles device access (PCI/I2C/codec/...) + * + * Copyright (C) 2000 Serguei Miridonov + * + * Currently maintained by: + * Ronald Bultje + * Laurent Pinchart + * Mailinglist + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include + +#include +#include + +#include "videocodec.h" +#include "zoran.h" +#include "zoran_device.h" +#include "zoran_card.h" + +#define IRQ_MASK ( ZR36057_ISR_GIRQ0 | \ + ZR36057_ISR_GIRQ1 | \ + ZR36057_ISR_JPEGRepIRQ ) + +static int lml33dpath; /* default = 0 + * 1 will use digital path in capture + * mode instead of analog. It can be + * used for picture adjustments using + * tool like xawtv while watching image + * on TV monitor connected to the output. + * However, due to absence of 75 Ohm + * load on Bt819 input, there will be + * some image imperfections */ + +module_param(lml33dpath, bool, 0644); +MODULE_PARM_DESC(lml33dpath, + "Use digital path capture mode (on LML33 cards)"); + +static void +zr36057_init_vfe (struct zoran *zr); + +/* + * General Purpose I/O and Guest bus access + */ + +/* + * This is a bit tricky. When a board lacks a GPIO function, the corresponding + * GPIO bit number in the card_info structure is set to 0. + */ + +void +GPIO (struct zoran *zr, + int bit, + unsigned int value) +{ + u32 reg; + u32 mask; + + /* Make sure the bit number is legal + * A bit number of -1 (lacking) gives a mask of 0, + * making it harmless */ + mask = (1 << (24 + bit)) & 0xff000000; + reg = btread(ZR36057_GPPGCR1) & ~mask; + if (value) { + reg |= mask; + } + btwrite(reg, ZR36057_GPPGCR1); + udelay(1); +} + +/* + * Wait til post office is no longer busy + */ + +int +post_office_wait (struct zoran *zr) +{ + u32 por; + +// while (((por = btread(ZR36057_POR)) & (ZR36057_POR_POPen | ZR36057_POR_POTime)) == ZR36057_POR_POPen) { + while ((por = btread(ZR36057_POR)) & ZR36057_POR_POPen) { + /* wait for something to happen */ + } + if ((por & ZR36057_POR_POTime) && !zr->card.gws_not_connected) { + /* In LML33/BUZ \GWS line is not connected, so it has always timeout set */ + dprintk(1, KERN_INFO "%s: pop timeout %08x\n", ZR_DEVNAME(zr), + por); + return -1; + } + + return 0; +} + +int +post_office_write (struct zoran *zr, + unsigned int guest, + unsigned int reg, + unsigned int value) +{ + u32 por; + + por = + ZR36057_POR_PODir | ZR36057_POR_POTime | ((guest & 7) << 20) | + ((reg & 7) << 16) | (value & 0xFF); + btwrite(por, ZR36057_POR); + + return post_office_wait(zr); +} + +int +post_office_read (struct zoran *zr, + unsigned int guest, + unsigned int reg) +{ + u32 por; + + por = ZR36057_POR_POTime | ((guest & 7) << 20) | ((reg & 7) << 16); + btwrite(por, ZR36057_POR); + if (post_office_wait(zr) < 0) { + return -1; + } + + return btread(ZR36057_POR) & 0xFF; +} + +/* + * detect guests + */ + +static void +dump_guests (struct zoran *zr) +{ + if (zr36067_debug > 2) { + int i, guest[8]; + + for (i = 1; i < 8; i++) { // Don't read jpeg codec here + guest[i] = post_office_read(zr, i, 0); + } + + printk(KERN_INFO "%s: Guests:", ZR_DEVNAME(zr)); + + for (i = 1; i < 8; i++) { + printk(" 0x%02x", guest[i]); + } + printk("\n"); + } +} + +static inline unsigned long +get_time (void) +{ + struct timeval tv; + + do_gettimeofday(&tv); + return (1000000 * tv.tv_sec + tv.tv_usec); +} + +void +detect_guest_activity (struct zoran *zr) +{ + int timeout, i, j, res, guest[8], guest0[8], change[8][3]; + unsigned long t0, t1; + + dump_guests(zr); + printk(KERN_INFO "%s: Detecting guests activity, please wait...\n", + ZR_DEVNAME(zr)); + for (i = 1; i < 8; i++) { // Don't read jpeg codec here + guest0[i] = guest[i] = post_office_read(zr, i, 0); + } + + timeout = 0; + j = 0; + t0 = get_time(); + while (timeout < 10000) { + udelay(10); + timeout++; + for (i = 1; (i < 8) && (j < 8); i++) { + res = post_office_read(zr, i, 0); + if (res != guest[i]) { + t1 = get_time(); + change[j][0] = (t1 - t0); + t0 = t1; + change[j][1] = i; + change[j][2] = res; + j++; + guest[i] = res; + } + } + if (j >= 8) + break; + } + printk(KERN_INFO "%s: Guests:", ZR_DEVNAME(zr)); + + for (i = 1; i < 8; i++) { + printk(" 0x%02x", guest0[i]); + } + printk("\n"); + if (j == 0) { + printk(KERN_INFO "%s: No activity detected.\n", ZR_DEVNAME(zr)); + return; + } + for (i = 0; i < j; i++) { + printk(KERN_INFO "%s: %6d: %d => 0x%02x\n", ZR_DEVNAME(zr), + change[i][0], change[i][1], change[i][2]); + } +} + +/* + * JPEG Codec access + */ + +void +jpeg_codec_sleep (struct zoran *zr, + int sleep) +{ + GPIO(zr, zr->card.gpio[ZR_GPIO_JPEG_SLEEP], !sleep); + if (!sleep) { + dprintk(3, + KERN_DEBUG + "%s: jpeg_codec_sleep() - wake GPIO=0x%08x\n", + ZR_DEVNAME(zr), btread(ZR36057_GPPGCR1)); + udelay(500); + } else { + dprintk(3, + KERN_DEBUG + "%s: jpeg_codec_sleep() - sleep GPIO=0x%08x\n", + ZR_DEVNAME(zr), btread(ZR36057_GPPGCR1)); + udelay(2); + } +} + +int +jpeg_codec_reset (struct zoran *zr) +{ + /* Take the codec out of sleep */ + jpeg_codec_sleep(zr, 0); + + if (zr->card.gpcs[GPCS_JPEG_RESET] != 0xff) { + post_office_write(zr, zr->card.gpcs[GPCS_JPEG_RESET], 0, + 0); + udelay(2); + } else { + GPIO(zr, zr->card.gpio[ZR_GPIO_JPEG_RESET], 0); + udelay(2); + GPIO(zr, zr->card.gpio[ZR_GPIO_JPEG_RESET], 1); + udelay(2); + } + + return 0; +} + +/* + * Set the registers for the size we have specified. Don't bother + * trying to understand this without the ZR36057 manual in front of + * you [AC]. + * + * PS: The manual is free for download in .pdf format from + * www.zoran.com - nicely done those folks. + */ + +static void +zr36057_adjust_vfe (struct zoran *zr, + enum zoran_codec_mode mode) +{ + u32 reg; + + switch (mode) { + case BUZ_MODE_MOTION_DECOMPRESS: + btand(~ZR36057_VFESPFR_ExtFl, ZR36057_VFESPFR); + reg = btread(ZR36057_VFEHCR); + if ((reg & (1 << 10)) && zr->card.type != LML33R10) { + reg += ((1 << 10) | 1); + } + btwrite(reg, ZR36057_VFEHCR); + break; + case BUZ_MODE_MOTION_COMPRESS: + case BUZ_MODE_IDLE: + default: + if (zr->norm == VIDEO_MODE_NTSC || + (zr->card.type == LML33R10 && + zr->norm == VIDEO_MODE_PAL)) + btand(~ZR36057_VFESPFR_ExtFl, ZR36057_VFESPFR); + else + btor(ZR36057_VFESPFR_ExtFl, ZR36057_VFESPFR); + reg = btread(ZR36057_VFEHCR); + if (!(reg & (1 << 10)) && zr->card.type != LML33R10) { + reg -= ((1 << 10) | 1); + } + btwrite(reg, ZR36057_VFEHCR); + break; + } +} + +/* + * set geometry + */ + +static void +zr36057_set_vfe (struct zoran *zr, + int video_width, + int video_height, + const struct zoran_format *format) +{ + struct tvnorm *tvn; + unsigned HStart, HEnd, VStart, VEnd; + unsigned DispMode; + unsigned VidWinWid, VidWinHt; + unsigned hcrop1, hcrop2, vcrop1, vcrop2; + unsigned Wa, We, Ha, He; + unsigned X, Y, HorDcm, VerDcm; + u32 reg; + unsigned mask_line_size; + + tvn = zr->timing; + + Wa = tvn->Wa; + Ha = tvn->Ha; + + dprintk(2, KERN_INFO "%s: set_vfe() - width = %d, height = %d\n", + ZR_DEVNAME(zr), video_width, video_height); + + if (zr->norm != VIDEO_MODE_PAL && + zr->norm != VIDEO_MODE_NTSC && + zr->norm != VIDEO_MODE_SECAM) { + dprintk(1, + KERN_ERR "%s: set_vfe() - norm = %d not valid\n", + ZR_DEVNAME(zr), zr->norm); + return; + } + if (video_width < BUZ_MIN_WIDTH || + video_height < BUZ_MIN_HEIGHT || + video_width > Wa || video_height > Ha) { + dprintk(1, KERN_ERR "%s: set_vfe: w=%d h=%d not valid\n", + ZR_DEVNAME(zr), video_width, video_height); + return; + } + + /**** zr36057 ****/ + + /* horizontal */ + VidWinWid = video_width; + X = DIV_ROUND_UP(VidWinWid * 64, tvn->Wa); + We = (VidWinWid * 64) / X; + HorDcm = 64 - X; + hcrop1 = 2 * ((tvn->Wa - We) / 4); + hcrop2 = tvn->Wa - We - hcrop1; + HStart = tvn->HStart ? tvn->HStart : 1; + /* (Ronald) Original comment: + * "| 1 Doesn't have any effect, tested on both a DC10 and a DC10+" + * this is false. It inverses chroma values on the LML33R10 (so Cr + * suddenly is shown as Cb and reverse, really cool effect if you + * want to see blue faces, not useful otherwise). So don't use |1. + * However, the DC10 has '0' as HStart, but does need |1, so we + * use a dirty check... + */ + HEnd = HStart + tvn->Wa - 1; + HStart += hcrop1; + HEnd -= hcrop2; + reg = ((HStart & ZR36057_VFEHCR_Hmask) << ZR36057_VFEHCR_HStart) + | ((HEnd & ZR36057_VFEHCR_Hmask) << ZR36057_VFEHCR_HEnd); + if (zr->card.vfe_pol.hsync_pol) + reg |= ZR36057_VFEHCR_HSPol; + btwrite(reg, ZR36057_VFEHCR); + + /* Vertical */ + DispMode = !(video_height > BUZ_MAX_HEIGHT / 2); + VidWinHt = DispMode ? video_height : video_height / 2; + Y = DIV_ROUND_UP(VidWinHt * 64 * 2, tvn->Ha); + He = (VidWinHt * 64) / Y; + VerDcm = 64 - Y; + vcrop1 = (tvn->Ha / 2 - He) / 2; + vcrop2 = tvn->Ha / 2 - He - vcrop1; + VStart = tvn->VStart; + VEnd = VStart + tvn->Ha / 2; // - 1; FIXME SnapShot times out with -1 in 768*576 on the DC10 - LP + VStart += vcrop1; + VEnd -= vcrop2; + reg = ((VStart & ZR36057_VFEVCR_Vmask) << ZR36057_VFEVCR_VStart) + | ((VEnd & ZR36057_VFEVCR_Vmask) << ZR36057_VFEVCR_VEnd); + if (zr->card.vfe_pol.vsync_pol) + reg |= ZR36057_VFEVCR_VSPol; + btwrite(reg, ZR36057_VFEVCR); + + /* scaler and pixel format */ + reg = 0; + reg |= (HorDcm << ZR36057_VFESPFR_HorDcm); + reg |= (VerDcm << ZR36057_VFESPFR_VerDcm); + reg |= (DispMode << ZR36057_VFESPFR_DispMode); + /* RJ: I don't know, why the following has to be the opposite + * of the corresponding ZR36060 setting, but only this way + * we get the correct colors when uncompressing to the screen */ + //reg |= ZR36057_VFESPFR_VCLKPol; /**/ + /* RJ: Don't know if that is needed for NTSC also */ + if (zr->norm != VIDEO_MODE_NTSC) + reg |= ZR36057_VFESPFR_ExtFl; // NEEDED!!!!!!! Wolfgang + reg |= ZR36057_VFESPFR_TopField; + if (HorDcm >= 48) { + reg |= 3 << ZR36057_VFESPFR_HFilter; /* 5 tap filter */ + } else if (HorDcm >= 32) { + reg |= 2 << ZR36057_VFESPFR_HFilter; /* 4 tap filter */ + } else if (HorDcm >= 16) { + reg |= 1 << ZR36057_VFESPFR_HFilter; /* 3 tap filter */ + } + reg |= format->vfespfr; + btwrite(reg, ZR36057_VFESPFR); + + /* display configuration */ + reg = (16 << ZR36057_VDCR_MinPix) + | (VidWinHt << ZR36057_VDCR_VidWinHt) + | (VidWinWid << ZR36057_VDCR_VidWinWid); + if (pci_pci_problems & PCIPCI_TRITON) + // || zr->revision < 1) // Revision 1 has also Triton support + reg &= ~ZR36057_VDCR_Triton; + else + reg |= ZR36057_VDCR_Triton; + btwrite(reg, ZR36057_VDCR); + + /* (Ronald) don't write this if overlay_mask = NULL */ + if (zr->overlay_mask) { + /* Write overlay clipping mask data, but don't enable overlay clipping */ + /* RJ: since this makes only sense on the screen, we use + * zr->overlay_settings.width instead of video_width */ + + mask_line_size = (BUZ_MAX_WIDTH + 31) / 32; + reg = virt_to_bus(zr->overlay_mask); + btwrite(reg, ZR36057_MMTR); + reg = virt_to_bus(zr->overlay_mask + mask_line_size); + btwrite(reg, ZR36057_MMBR); + reg = + mask_line_size - (zr->overlay_settings.width + + 31) / 32; + if (DispMode == 0) + reg += mask_line_size; + reg <<= ZR36057_OCR_MaskStride; + btwrite(reg, ZR36057_OCR); + } + + zr36057_adjust_vfe(zr, zr->codec_mode); +} + +/* + * Switch overlay on or off + */ + +void +zr36057_overlay (struct zoran *zr, + int on) +{ + u32 reg; + + if (on) { + /* do the necessary settings ... */ + btand(~ZR36057_VDCR_VidEn, ZR36057_VDCR); /* switch it off first */ + + zr36057_set_vfe(zr, + zr->overlay_settings.width, + zr->overlay_settings.height, + zr->overlay_settings.format); + + /* Start and length of each line MUST be 4-byte aligned. + * This should be allready checked before the call to this routine. + * All error messages are internal driver checking only! */ + + /* video display top and bottom registers */ + reg = (long) zr->buffer.base + + zr->overlay_settings.x * + ((zr->overlay_settings.format->depth + 7) / 8) + + zr->overlay_settings.y * + zr->buffer.bytesperline; + btwrite(reg, ZR36057_VDTR); + if (reg & 3) + dprintk(1, + KERN_ERR + "%s: zr36057_overlay() - video_address not aligned\n", + ZR_DEVNAME(zr)); + if (zr->overlay_settings.height > BUZ_MAX_HEIGHT / 2) + reg += zr->buffer.bytesperline; + btwrite(reg, ZR36057_VDBR); + + /* video stride, status, and frame grab register */ + reg = zr->buffer.bytesperline - + zr->overlay_settings.width * + ((zr->overlay_settings.format->depth + 7) / 8); + if (zr->overlay_settings.height > BUZ_MAX_HEIGHT / 2) + reg += zr->buffer.bytesperline; + if (reg & 3) + dprintk(1, + KERN_ERR + "%s: zr36057_overlay() - video_stride not aligned\n", + ZR_DEVNAME(zr)); + reg = (reg << ZR36057_VSSFGR_DispStride); + reg |= ZR36057_VSSFGR_VidOvf; /* clear overflow status */ + btwrite(reg, ZR36057_VSSFGR); + + /* Set overlay clipping */ + if (zr->overlay_settings.clipcount > 0) + btor(ZR36057_OCR_OvlEnable, ZR36057_OCR); + + /* ... and switch it on */ + btor(ZR36057_VDCR_VidEn, ZR36057_VDCR); + } else { + /* Switch it off */ + btand(~ZR36057_VDCR_VidEn, ZR36057_VDCR); + } +} + +/* + * The overlay mask has one bit for each pixel on a scan line, + * and the maximum window size is BUZ_MAX_WIDTH * BUZ_MAX_HEIGHT pixels. + */ + +void +write_overlay_mask (struct file *file, + struct video_clip *vp, + int count) +{ + struct zoran_fh *fh = file->private_data; + struct zoran *zr = fh->zr; + unsigned mask_line_size = (BUZ_MAX_WIDTH + 31) / 32; + u32 *mask; + int x, y, width, height; + unsigned i, j, k; + u32 reg; + + /* fill mask with one bits */ + memset(fh->overlay_mask, ~0, mask_line_size * 4 * BUZ_MAX_HEIGHT); + reg = 0; + + for (i = 0; i < count; ++i) { + /* pick up local copy of clip */ + x = vp[i].x; + y = vp[i].y; + width = vp[i].width; + height = vp[i].height; + + /* trim clips that extend beyond the window */ + if (x < 0) { + width += x; + x = 0; + } + if (y < 0) { + height += y; + y = 0; + } + if (x + width > fh->overlay_settings.width) { + width = fh->overlay_settings.width - x; + } + if (y + height > fh->overlay_settings.height) { + height = fh->overlay_settings.height - y; + } + + /* ignore degenerate clips */ + if (height <= 0) { + continue; + } + if (width <= 0) { + continue; + } + + /* apply clip for each scan line */ + for (j = 0; j < height; ++j) { + /* reset bit for each pixel */ + /* this can be optimized later if need be */ + mask = fh->overlay_mask + (y + j) * mask_line_size; + for (k = 0; k < width; ++k) { + mask[(x + k) / 32] &= + ~((u32) 1 << (x + k) % 32); + } + } + } +} + +/* Enable/Disable uncompressed memory grabbing of the 36057 */ + +void +zr36057_set_memgrab (struct zoran *zr, + int mode) +{ + if (mode) { + /* We only check SnapShot and not FrameGrab here. SnapShot==1 + * means a capture is already in progress, but FrameGrab==1 + * doesn't necessary mean that. It's more correct to say a 1 + * to 0 transition indicates a capture completed. If a + * capture is pending when capturing is tuned off, FrameGrab + * will be stuck at 1 until capturing is turned back on. + */ + if (btread(ZR36057_VSSFGR) & ZR36057_VSSFGR_SnapShot) + dprintk(1, + KERN_WARNING + "%s: zr36057_set_memgrab(1) with SnapShot on!?\n", + ZR_DEVNAME(zr)); + + /* switch on VSync interrupts */ + btwrite(IRQ_MASK, ZR36057_ISR); // Clear Interrupts + btor(zr->card.vsync_int, ZR36057_ICR); // SW + + /* enable SnapShot */ + btor(ZR36057_VSSFGR_SnapShot, ZR36057_VSSFGR); + + /* Set zr36057 video front end and enable video */ + zr36057_set_vfe(zr, zr->v4l_settings.width, + zr->v4l_settings.height, + zr->v4l_settings.format); + + zr->v4l_memgrab_active = 1; + } else { + /* switch off VSync interrupts */ + btand(~zr->card.vsync_int, ZR36057_ICR); // SW + + zr->v4l_memgrab_active = 0; + zr->v4l_grab_frame = NO_GRAB_ACTIVE; + + /* reenable grabbing to screen if it was running */ + if (zr->v4l_overlay_active) { + zr36057_overlay(zr, 1); + } else { + btand(~ZR36057_VDCR_VidEn, ZR36057_VDCR); + btand(~ZR36057_VSSFGR_SnapShot, ZR36057_VSSFGR); + } + } +} + +int +wait_grab_pending (struct zoran *zr) +{ + unsigned long flags; + + /* wait until all pending grabs are finished */ + + if (!zr->v4l_memgrab_active) + return 0; + + wait_event_interruptible(zr->v4l_capq, + (zr->v4l_pend_tail == zr->v4l_pend_head)); + if (signal_pending(current)) + return -ERESTARTSYS; + + spin_lock_irqsave(&zr->spinlock, flags); + zr36057_set_memgrab(zr, 0); + spin_unlock_irqrestore(&zr->spinlock, flags); + + return 0; +} + +/***************************************************************************** + * * + * Set up the Buz-specific MJPEG part * + * * + *****************************************************************************/ + +static inline void +set_frame (struct zoran *zr, + int val) +{ + GPIO(zr, zr->card.gpio[ZR_GPIO_JPEG_FRAME], val); +} + +static void +set_videobus_dir (struct zoran *zr, + int val) +{ + switch (zr->card.type) { + case LML33: + case LML33R10: + if (lml33dpath == 0) + GPIO(zr, 5, val); + else + GPIO(zr, 5, 1); + break; + default: + GPIO(zr, zr->card.gpio[ZR_GPIO_VID_DIR], + zr->card.gpio_pol[ZR_GPIO_VID_DIR] ? !val : val); + break; + } +} + +static void +init_jpeg_queue (struct zoran *zr) +{ + int i; + + /* re-initialize DMA ring stuff */ + zr->jpg_que_head = 0; + zr->jpg_dma_head = 0; + zr->jpg_dma_tail = 0; + zr->jpg_que_tail = 0; + zr->jpg_seq_num = 0; + zr->JPEG_error = 0; + zr->num_errors = 0; + zr->jpg_err_seq = 0; + zr->jpg_err_shift = 0; + zr->jpg_queued_num = 0; + for (i = 0; i < zr->jpg_buffers.num_buffers; i++) { + zr->jpg_buffers.buffer[i].state = BUZ_STATE_USER; /* nothing going on */ + } + for (i = 0; i < BUZ_NUM_STAT_COM; i++) { + zr->stat_com[i] = cpu_to_le32(1); /* mark as unavailable to zr36057 */ + } +} + +static void +zr36057_set_jpg (struct zoran *zr, + enum zoran_codec_mode mode) +{ + struct tvnorm *tvn; + u32 reg; + + tvn = zr->timing; + + /* assert P_Reset, disable code transfer, deassert Active */ + btwrite(0, ZR36057_JPC); + + /* MJPEG compression mode */ + switch (mode) { + + case BUZ_MODE_MOTION_COMPRESS: + default: + reg = ZR36057_JMC_MJPGCmpMode; + break; + + case BUZ_MODE_MOTION_DECOMPRESS: + reg = ZR36057_JMC_MJPGExpMode; + reg |= ZR36057_JMC_SyncMstr; + /* RJ: The following is experimental - improves the output to screen */ + //if(zr->jpg_settings.VFIFO_FB) reg |= ZR36057_JMC_VFIFO_FB; // No, it doesn't. SM + break; + + case BUZ_MODE_STILL_COMPRESS: + reg = ZR36057_JMC_JPGCmpMode; + break; + + case BUZ_MODE_STILL_DECOMPRESS: + reg = ZR36057_JMC_JPGExpMode; + break; + + } + reg |= ZR36057_JMC_JPG; + if (zr->jpg_settings.field_per_buff == 1) + reg |= ZR36057_JMC_Fld_per_buff; + btwrite(reg, ZR36057_JMC); + + /* vertical */ + btor(ZR36057_VFEVCR_VSPol, ZR36057_VFEVCR); + reg = (6 << ZR36057_VSP_VsyncSize) | + (tvn->Ht << ZR36057_VSP_FrmTot); + btwrite(reg, ZR36057_VSP); + reg = ((zr->jpg_settings.img_y + tvn->VStart) << ZR36057_FVAP_NAY) | + (zr->jpg_settings.img_height << ZR36057_FVAP_PAY); + btwrite(reg, ZR36057_FVAP); + + /* horizontal */ + if (zr->card.vfe_pol.hsync_pol) + btor(ZR36057_VFEHCR_HSPol, ZR36057_VFEHCR); + else + btand(~ZR36057_VFEHCR_HSPol, ZR36057_VFEHCR); + reg = ((tvn->HSyncStart) << ZR36057_HSP_HsyncStart) | + (tvn->Wt << ZR36057_HSP_LineTot); + btwrite(reg, ZR36057_HSP); + reg = ((zr->jpg_settings.img_x + + tvn->HStart + 4) << ZR36057_FHAP_NAX) | + (zr->jpg_settings.img_width << ZR36057_FHAP_PAX); + btwrite(reg, ZR36057_FHAP); + + /* field process parameters */ + if (zr->jpg_settings.odd_even) + reg = ZR36057_FPP_Odd_Even; + else + reg = 0; + + btwrite(reg, ZR36057_FPP); + + /* Set proper VCLK Polarity, else colors will be wrong during playback */ + //btor(ZR36057_VFESPFR_VCLKPol, ZR36057_VFESPFR); + + /* code base address */ + reg = virt_to_bus(zr->stat_com); + btwrite(reg, ZR36057_JCBA); + + /* FIFO threshold (FIFO is 160. double words) */ + /* NOTE: decimal values here */ + switch (mode) { + + case BUZ_MODE_STILL_COMPRESS: + case BUZ_MODE_MOTION_COMPRESS: + if (zr->card.type != BUZ) + reg = 140; + else + reg = 60; + break; + + case BUZ_MODE_STILL_DECOMPRESS: + case BUZ_MODE_MOTION_DECOMPRESS: + reg = 20; + break; + + default: + reg = 80; + break; + + } + btwrite(reg, ZR36057_JCFT); + zr36057_adjust_vfe(zr, mode); + +} + +void +print_interrupts (struct zoran *zr) +{ + int res, noerr = 0; + + printk(KERN_INFO "%s: interrupts received:", ZR_DEVNAME(zr)); + if ((res = zr->field_counter) < -1 || res > 1) { + printk(" FD:%d", res); + } + if ((res = zr->intr_counter_GIRQ1) != 0) { + printk(" GIRQ1:%d", res); + noerr++; + } + if ((res = zr->intr_counter_GIRQ0) != 0) { + printk(" GIRQ0:%d", res); + noerr++; + } + if ((res = zr->intr_counter_CodRepIRQ) != 0) { + printk(" CodRepIRQ:%d", res); + noerr++; + } + if ((res = zr->intr_counter_JPEGRepIRQ) != 0) { + printk(" JPEGRepIRQ:%d", res); + noerr++; + } + if (zr->JPEG_max_missed) { + printk(" JPEG delays: max=%d min=%d", zr->JPEG_max_missed, + zr->JPEG_min_missed); + } + if (zr->END_event_missed) { + printk(" ENDs missed: %d", zr->END_event_missed); + } + //if (zr->jpg_queued_num) { + printk(" queue_state=%ld/%ld/%ld/%ld", zr->jpg_que_tail, + zr->jpg_dma_tail, zr->jpg_dma_head, zr->jpg_que_head); + //} + if (!noerr) { + printk(": no interrupts detected."); + } + printk("\n"); +} + +void +clear_interrupt_counters (struct zoran *zr) +{ + zr->intr_counter_GIRQ1 = 0; + zr->intr_counter_GIRQ0 = 0; + zr->intr_counter_CodRepIRQ = 0; + zr->intr_counter_JPEGRepIRQ = 0; + zr->field_counter = 0; + zr->IRQ1_in = 0; + zr->IRQ1_out = 0; + zr->JPEG_in = 0; + zr->JPEG_out = 0; + zr->JPEG_0 = 0; + zr->JPEG_1 = 0; + zr->END_event_missed = 0; + zr->JPEG_missed = 0; + zr->JPEG_max_missed = 0; + zr->JPEG_min_missed = 0x7fffffff; +} + +static u32 +count_reset_interrupt (struct zoran *zr) +{ + u32 isr; + + if ((isr = btread(ZR36057_ISR) & 0x78000000)) { + if (isr & ZR36057_ISR_GIRQ1) { + btwrite(ZR36057_ISR_GIRQ1, ZR36057_ISR); + zr->intr_counter_GIRQ1++; + } + if (isr & ZR36057_ISR_GIRQ0) { + btwrite(ZR36057_ISR_GIRQ0, ZR36057_ISR); + zr->intr_counter_GIRQ0++; + } + if (isr & ZR36057_ISR_CodRepIRQ) { + btwrite(ZR36057_ISR_CodRepIRQ, ZR36057_ISR); + zr->intr_counter_CodRepIRQ++; + } + if (isr & ZR36057_ISR_JPEGRepIRQ) { + btwrite(ZR36057_ISR_JPEGRepIRQ, ZR36057_ISR); + zr->intr_counter_JPEGRepIRQ++; + } + } + return isr; +} + +void +jpeg_start (struct zoran *zr) +{ + int reg; + + zr->frame_num = 0; + + /* deassert P_reset, disable code transfer, deassert Active */ + btwrite(ZR36057_JPC_P_Reset, ZR36057_JPC); + /* stop flushing the internal code buffer */ + btand(~ZR36057_MCTCR_CFlush, ZR36057_MCTCR); + /* enable code transfer */ + btor(ZR36057_JPC_CodTrnsEn, ZR36057_JPC); + + /* clear IRQs */ + btwrite(IRQ_MASK, ZR36057_ISR); + /* enable the JPEG IRQs */ + btwrite(zr->card.jpeg_int | + ZR36057_ICR_JPEGRepIRQ | + ZR36057_ICR_IntPinEn, + ZR36057_ICR); + + set_frame(zr, 0); // \FRAME + + /* set the JPEG codec guest ID */ + reg = (zr->card.gpcs[1] << ZR36057_JCGI_JPEGuestID) | + (0 << ZR36057_JCGI_JPEGuestReg); + btwrite(reg, ZR36057_JCGI); + + if (zr->card.video_vfe == CODEC_TYPE_ZR36016 && + zr->card.video_codec == CODEC_TYPE_ZR36050) { + /* Enable processing on the ZR36016 */ + if (zr->vfe) + zr36016_write(zr->vfe, 0, 1); + + /* load the address of the GO register in the ZR36050 latch */ + post_office_write(zr, 0, 0, 0); + } + + /* assert Active */ + btor(ZR36057_JPC_Active, ZR36057_JPC); + + /* enable the Go generation */ + btor(ZR36057_JMC_Go_en, ZR36057_JMC); + udelay(30); + + set_frame(zr, 1); // /FRAME + + dprintk(3, KERN_DEBUG "%s: jpeg_start\n", ZR_DEVNAME(zr)); +} + +void +zr36057_enable_jpg (struct zoran *zr, + enum zoran_codec_mode mode) +{ + static int zero; + static int one = 1; + struct vfe_settings cap; + int field_size = + zr->jpg_buffers.buffer_size / zr->jpg_settings.field_per_buff; + + zr->codec_mode = mode; + + cap.x = zr->jpg_settings.img_x; + cap.y = zr->jpg_settings.img_y; + cap.width = zr->jpg_settings.img_width; + cap.height = zr->jpg_settings.img_height; + cap.decimation = + zr->jpg_settings.HorDcm | (zr->jpg_settings.VerDcm << 8); + cap.quality = zr->jpg_settings.jpg_comp.quality; + + switch (mode) { + + case BUZ_MODE_MOTION_COMPRESS: { + struct jpeg_app_marker app; + struct jpeg_com_marker com; + + /* In motion compress mode, the decoder output must be enabled, and + * the video bus direction set to input. + */ + set_videobus_dir(zr, 0); + decoder_command(zr, DECODER_ENABLE_OUTPUT, &one); + encoder_command(zr, ENCODER_SET_INPUT, &zero); + + /* Take the JPEG codec and the VFE out of sleep */ + jpeg_codec_sleep(zr, 0); + + /* set JPEG app/com marker */ + app.appn = zr->jpg_settings.jpg_comp.APPn; + app.len = zr->jpg_settings.jpg_comp.APP_len; + memcpy(app.data, zr->jpg_settings.jpg_comp.APP_data, 60); + zr->codec->control(zr->codec, CODEC_S_JPEG_APP_DATA, + sizeof(struct jpeg_app_marker), &app); + + com.len = zr->jpg_settings.jpg_comp.COM_len; + memcpy(com.data, zr->jpg_settings.jpg_comp.COM_data, 60); + zr->codec->control(zr->codec, CODEC_S_JPEG_COM_DATA, + sizeof(struct jpeg_com_marker), &com); + + /* Setup the JPEG codec */ + zr->codec->control(zr->codec, CODEC_S_JPEG_TDS_BYTE, + sizeof(int), &field_size); + zr->codec->set_video(zr->codec, zr->timing, &cap, + &zr->card.vfe_pol); + zr->codec->set_mode(zr->codec, CODEC_DO_COMPRESSION); + + /* Setup the VFE */ + if (zr->vfe) { + zr->vfe->control(zr->vfe, CODEC_S_JPEG_TDS_BYTE, + sizeof(int), &field_size); + zr->vfe->set_video(zr->vfe, zr->timing, &cap, + &zr->card.vfe_pol); + zr->vfe->set_mode(zr->vfe, CODEC_DO_COMPRESSION); + } + + init_jpeg_queue(zr); + zr36057_set_jpg(zr, mode); // \P_Reset, ... Video param, FIFO + + clear_interrupt_counters(zr); + dprintk(2, KERN_INFO "%s: enable_jpg(MOTION_COMPRESS)\n", + ZR_DEVNAME(zr)); + break; + } + + case BUZ_MODE_MOTION_DECOMPRESS: + /* In motion decompression mode, the decoder output must be disabled, and + * the video bus direction set to output. + */ + decoder_command(zr, DECODER_ENABLE_OUTPUT, &zero); + set_videobus_dir(zr, 1); + encoder_command(zr, ENCODER_SET_INPUT, &one); + + /* Take the JPEG codec and the VFE out of sleep */ + jpeg_codec_sleep(zr, 0); + /* Setup the VFE */ + if (zr->vfe) { + zr->vfe->set_video(zr->vfe, zr->timing, &cap, + &zr->card.vfe_pol); + zr->vfe->set_mode(zr->vfe, CODEC_DO_EXPANSION); + } + /* Setup the JPEG codec */ + zr->codec->set_video(zr->codec, zr->timing, &cap, + &zr->card.vfe_pol); + zr->codec->set_mode(zr->codec, CODEC_DO_EXPANSION); + + init_jpeg_queue(zr); + zr36057_set_jpg(zr, mode); // \P_Reset, ... Video param, FIFO + + clear_interrupt_counters(zr); + dprintk(2, KERN_INFO "%s: enable_jpg(MOTION_DECOMPRESS)\n", + ZR_DEVNAME(zr)); + break; + + case BUZ_MODE_IDLE: + default: + /* shut down processing */ + btand(~(zr->card.jpeg_int | ZR36057_ICR_JPEGRepIRQ), + ZR36057_ICR); + btwrite(zr->card.jpeg_int | ZR36057_ICR_JPEGRepIRQ, + ZR36057_ISR); + btand(~ZR36057_JMC_Go_en, ZR36057_JMC); // \Go_en + + msleep(50); + + set_videobus_dir(zr, 0); + set_frame(zr, 1); // /FRAME + btor(ZR36057_MCTCR_CFlush, ZR36057_MCTCR); // /CFlush + btwrite(0, ZR36057_JPC); // \P_Reset,\CodTrnsEn,\Active + btand(~ZR36057_JMC_VFIFO_FB, ZR36057_JMC); + btand(~ZR36057_JMC_SyncMstr, ZR36057_JMC); + jpeg_codec_reset(zr); + jpeg_codec_sleep(zr, 1); + zr36057_adjust_vfe(zr, mode); + + decoder_command(zr, DECODER_ENABLE_OUTPUT, &one); + encoder_command(zr, ENCODER_SET_INPUT, &zero); + + dprintk(2, KERN_INFO "%s: enable_jpg(IDLE)\n", ZR_DEVNAME(zr)); + break; + + } +} + +/* when this is called the spinlock must be held */ +void +zoran_feed_stat_com (struct zoran *zr) +{ + /* move frames from pending queue to DMA */ + + int frame, i, max_stat_com; + + max_stat_com = + (zr->jpg_settings.TmpDcm == + 1) ? BUZ_NUM_STAT_COM : (BUZ_NUM_STAT_COM >> 1); + + while ((zr->jpg_dma_head - zr->jpg_dma_tail) < max_stat_com && + zr->jpg_dma_head < zr->jpg_que_head) { + + frame = zr->jpg_pend[zr->jpg_dma_head & BUZ_MASK_FRAME]; + if (zr->jpg_settings.TmpDcm == 1) { + /* fill 1 stat_com entry */ + i = (zr->jpg_dma_head - + zr->jpg_err_shift) & BUZ_MASK_STAT_COM; + if (!(zr->stat_com[i] & cpu_to_le32(1))) + break; + zr->stat_com[i] = + cpu_to_le32(zr->jpg_buffers.buffer[frame].frag_tab_bus); + } else { + /* fill 2 stat_com entries */ + i = ((zr->jpg_dma_head - + zr->jpg_err_shift) & 1) * 2; + if (!(zr->stat_com[i] & cpu_to_le32(1))) + break; + zr->stat_com[i] = + cpu_to_le32(zr->jpg_buffers.buffer[frame].frag_tab_bus); + zr->stat_com[i + 1] = + cpu_to_le32(zr->jpg_buffers.buffer[frame].frag_tab_bus); + } + zr->jpg_buffers.buffer[frame].state = BUZ_STATE_DMA; + zr->jpg_dma_head++; + + } + if (zr->codec_mode == BUZ_MODE_MOTION_DECOMPRESS) + zr->jpg_queued_num++; +} + +/* when this is called the spinlock must be held */ +static void +zoran_reap_stat_com (struct zoran *zr) +{ + /* move frames from DMA queue to done queue */ + + int i; + u32 stat_com; + unsigned int seq; + unsigned int dif; + struct zoran_jpg_buffer *buffer; + int frame; + + /* In motion decompress we don't have a hardware frame counter, + * we just count the interrupts here */ + + if (zr->codec_mode == BUZ_MODE_MOTION_DECOMPRESS) { + zr->jpg_seq_num++; + } + while (zr->jpg_dma_tail < zr->jpg_dma_head) { + if (zr->jpg_settings.TmpDcm == 1) + i = (zr->jpg_dma_tail - + zr->jpg_err_shift) & BUZ_MASK_STAT_COM; + else + i = ((zr->jpg_dma_tail - + zr->jpg_err_shift) & 1) * 2 + 1; + + stat_com = le32_to_cpu(zr->stat_com[i]); + + if ((stat_com & 1) == 0) { + return; + } + frame = zr->jpg_pend[zr->jpg_dma_tail & BUZ_MASK_FRAME]; + buffer = &zr->jpg_buffers.buffer[frame]; + do_gettimeofday(&buffer->bs.timestamp); + + if (zr->codec_mode == BUZ_MODE_MOTION_COMPRESS) { + buffer->bs.length = (stat_com & 0x7fffff) >> 1; + + /* update sequence number with the help of the counter in stat_com */ + + seq = ((stat_com >> 24) + zr->jpg_err_seq) & 0xff; + dif = (seq - zr->jpg_seq_num) & 0xff; + zr->jpg_seq_num += dif; + } else { + buffer->bs.length = 0; + } + buffer->bs.seq = + zr->jpg_settings.TmpDcm == + 2 ? (zr->jpg_seq_num >> 1) : zr->jpg_seq_num; + buffer->state = BUZ_STATE_DONE; + + zr->jpg_dma_tail++; + } +} + +static void +error_handler (struct zoran *zr, + u32 astat, + u32 stat) +{ + /* This is JPEG error handling part */ + if ((zr->codec_mode != BUZ_MODE_MOTION_COMPRESS) && + (zr->codec_mode != BUZ_MODE_MOTION_DECOMPRESS)) { + //dprintk(1, KERN_ERR "%s: Internal error: error handling request in mode %d\n", ZR_DEVNAME(zr), zr->codec_mode); + return; + } + + if ((stat & 1) == 0 && + zr->codec_mode == BUZ_MODE_MOTION_COMPRESS && + zr->jpg_dma_tail - zr->jpg_que_tail >= + zr->jpg_buffers.num_buffers) { + /* No free buffers... */ + zoran_reap_stat_com(zr); + zoran_feed_stat_com(zr); + wake_up_interruptible(&zr->jpg_capq); + zr->JPEG_missed = 0; + return; + } + + if (zr->JPEG_error != 1) { + /* + * First entry: error just happened during normal operation + * + * In BUZ_MODE_MOTION_COMPRESS: + * + * Possible glitch in TV signal. In this case we should + * stop the codec and wait for good quality signal before + * restarting it to avoid further problems + * + * In BUZ_MODE_MOTION_DECOMPRESS: + * + * Bad JPEG frame: we have to mark it as processed (codec crashed + * and was not able to do it itself), and to remove it from queue. + */ + btand(~ZR36057_JMC_Go_en, ZR36057_JMC); + udelay(1); + stat = stat | (post_office_read(zr, 7, 0) & 3) << 8; + btwrite(0, ZR36057_JPC); + btor(ZR36057_MCTCR_CFlush, ZR36057_MCTCR); + jpeg_codec_reset(zr); + jpeg_codec_sleep(zr, 1); + zr->JPEG_error = 1; + zr->num_errors++; + + /* Report error */ + if (zr36067_debug > 1 && zr->num_errors <= 8) { + long frame; + frame = + zr->jpg_pend[zr->jpg_dma_tail & BUZ_MASK_FRAME]; + printk(KERN_ERR + "%s: JPEG error stat=0x%08x(0x%08x) queue_state=%ld/%ld/%ld/%ld seq=%ld frame=%ld. Codec stopped. ", + ZR_DEVNAME(zr), stat, zr->last_isr, + zr->jpg_que_tail, zr->jpg_dma_tail, + zr->jpg_dma_head, zr->jpg_que_head, + zr->jpg_seq_num, frame); + printk("stat_com frames:"); + { + int i, j; + for (j = 0; j < BUZ_NUM_STAT_COM; j++) { + for (i = 0; + i < zr->jpg_buffers.num_buffers; + i++) { + if (le32_to_cpu(zr->stat_com[j]) == + zr->jpg_buffers. + buffer[i]. + frag_tab_bus) { + printk("% d->%d", + j, i); + } + } + } + printk("\n"); + } + } + /* Find an entry in stat_com and rotate contents */ + { + int i; + + if (zr->jpg_settings.TmpDcm == 1) + i = (zr->jpg_dma_tail - + zr->jpg_err_shift) & BUZ_MASK_STAT_COM; + else + i = ((zr->jpg_dma_tail - + zr->jpg_err_shift) & 1) * 2; + if (zr->codec_mode == BUZ_MODE_MOTION_DECOMPRESS) { + /* Mimic zr36067 operation */ + zr->stat_com[i] |= cpu_to_le32(1); + if (zr->jpg_settings.TmpDcm != 1) + zr->stat_com[i + 1] |= cpu_to_le32(1); + /* Refill */ + zoran_reap_stat_com(zr); + zoran_feed_stat_com(zr); + wake_up_interruptible(&zr->jpg_capq); + /* Find an entry in stat_com again after refill */ + if (zr->jpg_settings.TmpDcm == 1) + i = (zr->jpg_dma_tail - + zr->jpg_err_shift) & + BUZ_MASK_STAT_COM; + else + i = ((zr->jpg_dma_tail - + zr->jpg_err_shift) & 1) * 2; + } + if (i) { + /* Rotate stat_comm entries to make current entry first */ + int j; + __le32 bus_addr[BUZ_NUM_STAT_COM]; + + /* Here we are copying the stat_com array, which + * is already in little endian format, so + * no endian conversions here + */ + memcpy(bus_addr, zr->stat_com, + sizeof(bus_addr)); + for (j = 0; j < BUZ_NUM_STAT_COM; j++) { + zr->stat_com[j] = + bus_addr[(i + j) & + BUZ_MASK_STAT_COM]; + + } + zr->jpg_err_shift += i; + zr->jpg_err_shift &= BUZ_MASK_STAT_COM; + } + if (zr->codec_mode == BUZ_MODE_MOTION_COMPRESS) + zr->jpg_err_seq = zr->jpg_seq_num; /* + 1; */ + } + } + + /* Now the stat_comm buffer is ready for restart */ + do { + int status, mode; + + if (zr->codec_mode == BUZ_MODE_MOTION_COMPRESS) { + decoder_command(zr, DECODER_GET_STATUS, &status); + mode = CODEC_DO_COMPRESSION; + } else { + status = 0; + mode = CODEC_DO_EXPANSION; + } + if (zr->codec_mode == BUZ_MODE_MOTION_DECOMPRESS || + (status & DECODER_STATUS_GOOD)) { + /********** RESTART code *************/ + jpeg_codec_reset(zr); + zr->codec->set_mode(zr->codec, mode); + zr36057_set_jpg(zr, zr->codec_mode); + jpeg_start(zr); + + if (zr->num_errors <= 8) + dprintk(2, KERN_INFO "%s: Restart\n", + ZR_DEVNAME(zr)); + + zr->JPEG_missed = 0; + zr->JPEG_error = 2; + /********** End RESTART code ***********/ + } + } while (0); +} + +irqreturn_t +zoran_irq (int irq, + void *dev_id) +{ + u32 stat, astat; + int count; + struct zoran *zr; + unsigned long flags; + + zr = dev_id; + count = 0; + + if (zr->testing) { + /* Testing interrupts */ + spin_lock_irqsave(&zr->spinlock, flags); + while ((stat = count_reset_interrupt(zr))) { + if (count++ > 100) { + btand(~ZR36057_ICR_IntPinEn, ZR36057_ICR); + dprintk(1, + KERN_ERR + "%s: IRQ lockup while testing, isr=0x%08x, cleared int mask\n", + ZR_DEVNAME(zr), stat); + wake_up_interruptible(&zr->test_q); + } + } + zr->last_isr = stat; + spin_unlock_irqrestore(&zr->spinlock, flags); + return IRQ_HANDLED; + } + + spin_lock_irqsave(&zr->spinlock, flags); + while (1) { + /* get/clear interrupt status bits */ + stat = count_reset_interrupt(zr); + astat = stat & IRQ_MASK; + if (!astat) { + break; + } + dprintk(4, + KERN_DEBUG + "zoran_irq: astat: 0x%08x, mask: 0x%08x\n", + astat, btread(ZR36057_ICR)); + if (astat & zr->card.vsync_int) { // SW + + if (zr->codec_mode == BUZ_MODE_MOTION_DECOMPRESS || + zr->codec_mode == BUZ_MODE_MOTION_COMPRESS) { + /* count missed interrupts */ + zr->JPEG_missed++; + } + //post_office_read(zr,1,0); + /* Interrupts may still happen when + * zr->v4l_memgrab_active is switched off. + * We simply ignore them */ + + if (zr->v4l_memgrab_active) { + + /* A lot more checks should be here ... */ + if ((btread(ZR36057_VSSFGR) & + ZR36057_VSSFGR_SnapShot) == 0) + dprintk(1, + KERN_WARNING + "%s: BuzIRQ with SnapShot off ???\n", + ZR_DEVNAME(zr)); + + if (zr->v4l_grab_frame != NO_GRAB_ACTIVE) { + /* There is a grab on a frame going on, check if it has finished */ + + if ((btread(ZR36057_VSSFGR) & + ZR36057_VSSFGR_FrameGrab) == + 0) { + /* it is finished, notify the user */ + + zr->v4l_buffers.buffer[zr->v4l_grab_frame].state = BUZ_STATE_DONE; + zr->v4l_buffers.buffer[zr->v4l_grab_frame].bs.seq = zr->v4l_grab_seq; + do_gettimeofday(&zr->v4l_buffers.buffer[zr->v4l_grab_frame].bs.timestamp); + zr->v4l_grab_frame = NO_GRAB_ACTIVE; + zr->v4l_pend_tail++; + } + } + + if (zr->v4l_grab_frame == NO_GRAB_ACTIVE) + wake_up_interruptible(&zr->v4l_capq); + + /* Check if there is another grab queued */ + + if (zr->v4l_grab_frame == NO_GRAB_ACTIVE && + zr->v4l_pend_tail != zr->v4l_pend_head) { + + int frame = zr->v4l_pend[zr->v4l_pend_tail & + V4L_MASK_FRAME]; + u32 reg; + + zr->v4l_grab_frame = frame; + + /* Set zr36057 video front end and enable video */ + + /* Buffer address */ + + reg = + zr->v4l_buffers.buffer[frame]. + fbuffer_bus; + btwrite(reg, ZR36057_VDTR); + if (zr->v4l_settings.height > + BUZ_MAX_HEIGHT / 2) + reg += + zr->v4l_settings. + bytesperline; + btwrite(reg, ZR36057_VDBR); + + /* video stride, status, and frame grab register */ + reg = 0; + if (zr->v4l_settings.height > + BUZ_MAX_HEIGHT / 2) + reg += + zr->v4l_settings. + bytesperline; + reg = + (reg << + ZR36057_VSSFGR_DispStride); + reg |= ZR36057_VSSFGR_VidOvf; + reg |= ZR36057_VSSFGR_SnapShot; + reg |= ZR36057_VSSFGR_FrameGrab; + btwrite(reg, ZR36057_VSSFGR); + + btor(ZR36057_VDCR_VidEn, + ZR36057_VDCR); + } + } + + /* even if we don't grab, we do want to increment + * the sequence counter to see lost frames */ + zr->v4l_grab_seq++; + } +#if (IRQ_MASK & ZR36057_ISR_CodRepIRQ) + if (astat & ZR36057_ISR_CodRepIRQ) { + zr->intr_counter_CodRepIRQ++; + IDEBUG(printk + (KERN_DEBUG "%s: ZR36057_ISR_CodRepIRQ\n", + ZR_DEVNAME(zr))); + btand(~ZR36057_ICR_CodRepIRQ, ZR36057_ICR); + } +#endif /* (IRQ_MASK & ZR36057_ISR_CodRepIRQ) */ + +#if (IRQ_MASK & ZR36057_ISR_JPEGRepIRQ) + if (astat & ZR36057_ISR_JPEGRepIRQ) { + + if (zr->codec_mode == BUZ_MODE_MOTION_DECOMPRESS || + zr->codec_mode == BUZ_MODE_MOTION_COMPRESS) { + if (zr36067_debug > 1 && + (!zr->frame_num || zr->JPEG_error)) { + printk(KERN_INFO + "%s: first frame ready: state=0x%08x odd_even=%d field_per_buff=%d delay=%d\n", + ZR_DEVNAME(zr), stat, + zr->jpg_settings.odd_even, + zr->jpg_settings. + field_per_buff, + zr->JPEG_missed); + { + char sc[] = "0000"; + char sv[5]; + int i; + strcpy(sv, sc); + for (i = 0; i < 4; i++) { + if (le32_to_cpu(zr->stat_com[i]) & 1) + sv[i] = '1'; + } + sv[4] = 0; + printk(KERN_INFO + "%s: stat_com=%s queue_state=%ld/%ld/%ld/%ld\n", + ZR_DEVNAME(zr), sv, + zr->jpg_que_tail, + zr->jpg_dma_tail, + zr->jpg_dma_head, + zr->jpg_que_head); + } + } else { + if (zr->JPEG_missed > zr->JPEG_max_missed) // Get statistics + zr->JPEG_max_missed = + zr->JPEG_missed; + if (zr->JPEG_missed < + zr->JPEG_min_missed) + zr->JPEG_min_missed = + zr->JPEG_missed; + } + + if (zr36067_debug > 2 && zr->frame_num < 6) { + int i; + printk("%s: seq=%ld stat_com:", + ZR_DEVNAME(zr), zr->jpg_seq_num); + for (i = 0; i < 4; i++) { + printk(" %08x", + le32_to_cpu(zr->stat_com[i])); + } + printk("\n"); + } + zr->frame_num++; + zr->JPEG_missed = 0; + zr->JPEG_error = 0; + zoran_reap_stat_com(zr); + zoran_feed_stat_com(zr); + wake_up_interruptible(&zr->jpg_capq); + } /*else { + dprintk(1, + KERN_ERR + "%s: JPEG interrupt while not in motion (de)compress mode!\n", + ZR_DEVNAME(zr)); + }*/ + } +#endif /* (IRQ_MASK & ZR36057_ISR_JPEGRepIRQ) */ + + /* DATERR, too many fields missed, error processing */ + if ((astat & zr->card.jpeg_int) || + zr->JPEG_missed > 25 || + zr->JPEG_error == 1 || + ((zr->codec_mode == BUZ_MODE_MOTION_DECOMPRESS) && + (zr->frame_num & (zr->JPEG_missed > + zr->jpg_settings.field_per_buff)))) { + error_handler(zr, astat, stat); + } + + count++; + if (count > 10) { + dprintk(2, KERN_WARNING "%s: irq loop %d\n", + ZR_DEVNAME(zr), count); + if (count > 20) { + btand(~ZR36057_ICR_IntPinEn, ZR36057_ICR); + dprintk(2, + KERN_ERR + "%s: IRQ lockup, cleared int mask\n", + ZR_DEVNAME(zr)); + break; + } + } + zr->last_isr = stat; + } + spin_unlock_irqrestore(&zr->spinlock, flags); + + return IRQ_HANDLED; +} + +void +zoran_set_pci_master (struct zoran *zr, + int set_master) +{ + if (set_master) { + pci_set_master(zr->pci_dev); + } else { + u16 command; + + pci_read_config_word(zr->pci_dev, PCI_COMMAND, &command); + command &= ~PCI_COMMAND_MASTER; + pci_write_config_word(zr->pci_dev, PCI_COMMAND, command); + } +} + +void +zoran_init_hardware (struct zoran *zr) +{ + int j, zero = 0; + + /* Enable bus-mastering */ + zoran_set_pci_master(zr, 1); + + /* Initialize the board */ + if (zr->card.init) { + zr->card.init(zr); + } + + j = zr->card.input[zr->input].muxsel; + + decoder_command(zr, 0, NULL); + decoder_command(zr, DECODER_SET_NORM, &zr->norm); + decoder_command(zr, DECODER_SET_INPUT, &j); + + encoder_command(zr, 0, NULL); + encoder_command(zr, ENCODER_SET_NORM, &zr->norm); + encoder_command(zr, ENCODER_SET_INPUT, &zero); + + /* toggle JPEG codec sleep to sync PLL */ + jpeg_codec_sleep(zr, 1); + jpeg_codec_sleep(zr, 0); + + /* set individual interrupt enables (without GIRQ1) + * but don't global enable until zoran_open() */ + + //btwrite(IRQ_MASK & ~ZR36057_ISR_GIRQ1, ZR36057_ICR); // SW + // It looks like using only JPEGRepIRQEn is not always reliable, + // may be when JPEG codec crashes it won't generate IRQ? So, + /*CP*/ // btwrite(IRQ_MASK, ZR36057_ICR); // Enable Vsync interrupts too. SM WHY ? LP + zr36057_init_vfe(zr); + + zr36057_enable_jpg(zr, BUZ_MODE_IDLE); + + btwrite(IRQ_MASK, ZR36057_ISR); // Clears interrupts +} + +void +zr36057_restart (struct zoran *zr) +{ + btwrite(0, ZR36057_SPGPPCR); + mdelay(1); + btor(ZR36057_SPGPPCR_SoftReset, ZR36057_SPGPPCR); + mdelay(1); + + /* assert P_Reset */ + btwrite(0, ZR36057_JPC); + /* set up GPIO direction - all output */ + btwrite(ZR36057_SPGPPCR_SoftReset | 0, ZR36057_SPGPPCR); + + /* set up GPIO pins and guest bus timing */ + btwrite((0x81 << 24) | 0x8888, ZR36057_GPPGCR1); +} + +/* + * initialize video front end + */ + +static void +zr36057_init_vfe (struct zoran *zr) +{ + u32 reg; + + reg = btread(ZR36057_VFESPFR); + reg |= ZR36057_VFESPFR_LittleEndian; + reg &= ~ZR36057_VFESPFR_VCLKPol; + reg |= ZR36057_VFESPFR_ExtFl; + reg |= ZR36057_VFESPFR_TopField; + btwrite(reg, ZR36057_VFESPFR); + reg = btread(ZR36057_VDCR); + if (pci_pci_problems & PCIPCI_TRITON) + // || zr->revision < 1) // Revision 1 has also Triton support + reg &= ~ZR36057_VDCR_Triton; + else + reg |= ZR36057_VDCR_Triton; + btwrite(reg, ZR36057_VDCR); +} + +/* + * Interface to decoder and encoder chips using i2c bus + */ + +int +decoder_command (struct zoran *zr, + int cmd, + void *data) +{ + if (zr->decoder == NULL) + return -EIO; + + if (zr->card.type == LML33 && + (cmd == DECODER_SET_NORM || cmd == DECODER_SET_INPUT)) { + int res; + + // Bt819 needs to reset its FIFO buffer using #FRST pin and + // LML33 card uses GPIO(7) for that. + GPIO(zr, 7, 0); + res = zr->decoder->driver->command(zr->decoder, cmd, data); + // Pull #FRST high. + GPIO(zr, 7, 1); + return res; + } else + return zr->decoder->driver->command(zr->decoder, cmd, + data); +} + +int +encoder_command (struct zoran *zr, + int cmd, + void *data) +{ + if (zr->encoder == NULL) + return -1; + + return zr->encoder->driver->command(zr->encoder, cmd, data); +} diff --git a/drivers/media/video/zoran/zoran_device.h b/drivers/media/video/zoran/zoran_device.h new file mode 100644 index 0000000..74c6c8e --- /dev/null +++ b/drivers/media/video/zoran/zoran_device.h @@ -0,0 +1,97 @@ +/* + * Zoran zr36057/zr36067 PCI controller driver, for the + * Pinnacle/Miro DC10/DC10+/DC30/DC30+, Iomega Buz, Linux + * Media Labs LML33/LML33R10. + * + * This part handles card-specific data and detection + * + * Copyright (C) 2000 Serguei Miridonov + * + * Currently maintained by: + * Ronald Bultje + * Laurent Pinchart + * Mailinglist + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef __ZORAN_DEVICE_H__ +#define __ZORAN_DEVICE_H__ + +/* general purpose I/O */ +extern void GPIO(struct zoran *zr, + int bit, + unsigned int value); + +/* codec (or actually: guest bus) access */ +extern int post_office_wait(struct zoran *zr); +extern int post_office_write(struct zoran *zr, + unsigned guest, + unsigned reg, + unsigned value); +extern int post_office_read(struct zoran *zr, + unsigned guest, + unsigned reg); + +extern void detect_guest_activity(struct zoran *zr); + +extern void jpeg_codec_sleep(struct zoran *zr, + int sleep); +extern int jpeg_codec_reset(struct zoran *zr); + +/* zr360x7 access to raw capture */ +extern void zr36057_overlay(struct zoran *zr, + int on); +extern void write_overlay_mask(struct file *file, + struct video_clip *vp, + int count); +extern void zr36057_set_memgrab(struct zoran *zr, + int mode); +extern int wait_grab_pending(struct zoran *zr); + +/* interrupts */ +extern void print_interrupts(struct zoran *zr); +extern void clear_interrupt_counters(struct zoran *zr); +extern irqreturn_t zoran_irq(int irq, void *dev_id); + +/* JPEG codec access */ +extern void jpeg_start(struct zoran *zr); +extern void zr36057_enable_jpg(struct zoran *zr, + enum zoran_codec_mode mode); +extern void zoran_feed_stat_com(struct zoran *zr); + +/* general */ +extern void zoran_set_pci_master(struct zoran *zr, + int set_master); +extern void zoran_init_hardware(struct zoran *zr); +extern void zr36057_restart(struct zoran *zr); + +extern const struct zoran_format zoran_formats[]; + +extern int v4l_nbufs; +extern int v4l_bufsize; +extern int jpg_nbufs; +extern int jpg_bufsize; +extern int pass_through; + +/* i2c */ +extern int decoder_command(struct zoran *zr, + int cmd, + void *data); +extern int encoder_command(struct zoran *zr, + int cmd, + void *data); + +#endif /* __ZORAN_DEVICE_H__ */ diff --git a/drivers/media/video/zoran/zoran_driver.c b/drivers/media/video/zoran/zoran_driver.c new file mode 100644 index 0000000..25de763 --- /dev/null +++ b/drivers/media/video/zoran/zoran_driver.c @@ -0,0 +1,4649 @@ +/* + * Zoran zr36057/zr36067 PCI controller driver, for the + * Pinnacle/Miro DC10/DC10+/DC30/DC30+, Iomega Buz, Linux + * Media Labs LML33/LML33R10. + * + * Copyright (C) 2000 Serguei Miridonov + * + * Changes for BUZ by Wolfgang Scherr + * + * Changes for DC10/DC30 by Laurent Pinchart + * + * Changes for LML33R10 by Maxim Yevtyushkin + * + * Changes for videodev2/v4l2 by Ronald Bultje + * + * Based on + * + * Miro DC10 driver + * Copyright (C) 1999 Wolfgang Scherr + * + * Iomega Buz driver version 1.0 + * Copyright (C) 1999 Rainer Johanni + * + * buz.0.0.3 + * Copyright (C) 1998 Dave Perks + * + * bttv - Bt848 frame grabber driver + * Copyright (C) 1996,97,98 Ralph Metzler (rjkm@thp.uni-koeln.de) + * & Marcus Metzler (mocm@thp.uni-koeln.de) + * + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +#include +#define MAP_NR(x) virt_to_page(x) +#define ZORAN_VID_TYPE ( \ + VID_TYPE_CAPTURE | \ + VID_TYPE_OVERLAY | \ + VID_TYPE_CLIPPING | \ + VID_TYPE_FRAMERAM | \ + VID_TYPE_SCALES | \ + VID_TYPE_MJPEG_DECODER | \ + VID_TYPE_MJPEG_ENCODER \ + ) + +#include +#include +#include +#include "videocodec.h" + +#include +#include +#include +#include + +#include +#include +#include +#include "zoran.h" +#include "zoran_device.h" +#include "zoran_card.h" + + /* we declare some card type definitions here, they mean + * the same as the v4l1 ZORAN_VID_TYPE above, except it's v4l2 */ +#define ZORAN_V4L2_VID_FLAGS ( \ + V4L2_CAP_STREAMING |\ + V4L2_CAP_VIDEO_CAPTURE |\ + V4L2_CAP_VIDEO_OUTPUT |\ + V4L2_CAP_VIDEO_OVERLAY \ + ) + + +#if defined(CONFIG_VIDEO_V4L1_COMPAT) +#define ZFMT(pal, fcc, cs) \ + .palette = (pal), .fourcc = (fcc), .colorspace = (cs) +#else +#define ZFMT(pal, fcc, cs) \ + .fourcc = (fcc), .colorspace = (cs) +#endif + +const struct zoran_format zoran_formats[] = { + { + .name = "15-bit RGB LE", + ZFMT(VIDEO_PALETTE_RGB555, + V4L2_PIX_FMT_RGB555, V4L2_COLORSPACE_SRGB), + .depth = 15, + .flags = ZORAN_FORMAT_CAPTURE | + ZORAN_FORMAT_OVERLAY, + .vfespfr = ZR36057_VFESPFR_RGB555|ZR36057_VFESPFR_ErrDif| + ZR36057_VFESPFR_LittleEndian, + }, { + .name = "15-bit RGB BE", + ZFMT(-1, + V4L2_PIX_FMT_RGB555X, V4L2_COLORSPACE_SRGB), + .depth = 15, + .flags = ZORAN_FORMAT_CAPTURE | + ZORAN_FORMAT_OVERLAY, + .vfespfr = ZR36057_VFESPFR_RGB555|ZR36057_VFESPFR_ErrDif, + }, { + .name = "16-bit RGB LE", + ZFMT(VIDEO_PALETTE_RGB565, + V4L2_PIX_FMT_RGB565, V4L2_COLORSPACE_SRGB), + .depth = 16, + .flags = ZORAN_FORMAT_CAPTURE | + ZORAN_FORMAT_OVERLAY, + .vfespfr = ZR36057_VFESPFR_RGB565|ZR36057_VFESPFR_ErrDif| + ZR36057_VFESPFR_LittleEndian, + }, { + .name = "16-bit RGB BE", + ZFMT(-1, + V4L2_PIX_FMT_RGB565X, V4L2_COLORSPACE_SRGB), + .depth = 16, + .flags = ZORAN_FORMAT_CAPTURE | + ZORAN_FORMAT_OVERLAY, + .vfespfr = ZR36057_VFESPFR_RGB565|ZR36057_VFESPFR_ErrDif, + }, { + .name = "24-bit RGB", + ZFMT(VIDEO_PALETTE_RGB24, + V4L2_PIX_FMT_BGR24, V4L2_COLORSPACE_SRGB), + .depth = 24, + .flags = ZORAN_FORMAT_CAPTURE | + ZORAN_FORMAT_OVERLAY, + .vfespfr = ZR36057_VFESPFR_RGB888|ZR36057_VFESPFR_Pack24, + }, { + .name = "32-bit RGB LE", + ZFMT(VIDEO_PALETTE_RGB32, + V4L2_PIX_FMT_BGR32, V4L2_COLORSPACE_SRGB), + .depth = 32, + .flags = ZORAN_FORMAT_CAPTURE | + ZORAN_FORMAT_OVERLAY, + .vfespfr = ZR36057_VFESPFR_RGB888|ZR36057_VFESPFR_LittleEndian, + }, { + .name = "32-bit RGB BE", + ZFMT(-1, + V4L2_PIX_FMT_RGB32, V4L2_COLORSPACE_SRGB), + .depth = 32, + .flags = ZORAN_FORMAT_CAPTURE | + ZORAN_FORMAT_OVERLAY, + .vfespfr = ZR36057_VFESPFR_RGB888, + }, { + .name = "4:2:2, packed, YUYV", + ZFMT(VIDEO_PALETTE_YUV422, + V4L2_PIX_FMT_YUYV, V4L2_COLORSPACE_SMPTE170M), + .depth = 16, + .flags = ZORAN_FORMAT_CAPTURE | + ZORAN_FORMAT_OVERLAY, + .vfespfr = ZR36057_VFESPFR_YUV422, + }, { + .name = "4:2:2, packed, UYVY", + ZFMT(VIDEO_PALETTE_UYVY, + V4L2_PIX_FMT_UYVY, V4L2_COLORSPACE_SMPTE170M), + .depth = 16, + .flags = ZORAN_FORMAT_CAPTURE | + ZORAN_FORMAT_OVERLAY, + .vfespfr = ZR36057_VFESPFR_YUV422|ZR36057_VFESPFR_LittleEndian, + }, { + .name = "Hardware-encoded Motion-JPEG", + ZFMT(-1, + V4L2_PIX_FMT_MJPEG, V4L2_COLORSPACE_SMPTE170M), + .depth = 0, + .flags = ZORAN_FORMAT_CAPTURE | + ZORAN_FORMAT_PLAYBACK | + ZORAN_FORMAT_COMPRESSED, + } +}; +#define NUM_FORMATS ARRAY_SIZE(zoran_formats) + +// RJ: Test only - want to test BUZ_USE_HIMEM even when CONFIG_BIGPHYS_AREA is defined + + +static int lock_norm; /* 0 = default 1 = Don't change TV standard (norm) */ +module_param(lock_norm, int, 0644); +MODULE_PARM_DESC(lock_norm, "Prevent norm changes (1 = ignore, >1 = fail)"); + + /* small helper function for calculating buffersizes for v4l2 + * we calculate the nearest higher power-of-two, which + * will be the recommended buffersize */ +static __u32 +zoran_v4l2_calc_bufsize (struct zoran_jpg_settings *settings) +{ + __u8 div = settings->VerDcm * settings->HorDcm * settings->TmpDcm; + __u32 num = (1024 * 512) / (div); + __u32 result = 2; + + num--; + while (num) { + num >>= 1; + result <<= 1; + } + + if (result > jpg_bufsize) + return jpg_bufsize; + if (result < 8192) + return 8192; + return result; +} + +/* forward references */ +static void v4l_fbuffer_free(struct file *file); +static void jpg_fbuffer_free(struct file *file); + +/* + * Allocate the V4L grab buffers + * + * These have to be pysically contiguous. + * If v4l_bufsize <= MAX_KMALLOC_MEM we use kmalloc + * else we try to allocate them with bigphysarea_alloc_pages + * if the bigphysarea patch is present in the kernel, + * else we try to use high memory (if the user has bootet + * Linux with the necessary memory left over). + */ + +static unsigned long +get_high_mem (unsigned long size) +{ +/* + * Check if there is usable memory at the end of Linux memory + * of at least size. Return the physical address of this memory, + * return 0 on failure. + * + * The idea is from Alexandro Rubini's book "Linux device drivers". + * The driver from him which is downloadable from O'Reilly's + * web site misses the "virt_to_phys(high_memory)" part + * (and therefore doesn't work at all - at least with 2.2.x kernels). + * + * It should be unnecessary to mention that THIS IS DANGEROUS, + * if more than one driver at a time has the idea to use this memory!!!! + */ + + volatile unsigned char __iomem *mem; + unsigned char c; + unsigned long hi_mem_ph; + unsigned long i; + + /* Map the high memory to user space */ + + hi_mem_ph = virt_to_phys(high_memory); + + mem = ioremap(hi_mem_ph, size); + if (!mem) { + dprintk(1, + KERN_ERR "%s: get_high_mem() - ioremap failed\n", + ZORAN_NAME); + return 0; + } + + for (i = 0; i < size; i++) { + /* Check if it is memory */ + c = i & 0xff; + writeb(c, mem + i); + if (readb(mem + i) != c) + break; + c = 255 - c; + writeb(c, mem + i); + if (readb(mem + i) != c) + break; + writeb(0, mem + i); /* zero out memory */ + + /* give the kernel air to breath */ + if ((i & 0x3ffff) == 0x3ffff) + schedule(); + } + + iounmap(mem); + + if (i != size) { + dprintk(1, + KERN_ERR + "%s: get_high_mem() - requested %lu, avail %lu\n", + ZORAN_NAME, size, i); + return 0; + } + + return hi_mem_ph; +} + +static int +v4l_fbuffer_alloc (struct file *file) +{ + struct zoran_fh *fh = file->private_data; + struct zoran *zr = fh->zr; + int i, off; + unsigned char *mem; + unsigned long pmem = 0; + + /* we might have old buffers lying around... */ + if (fh->v4l_buffers.ready_to_be_freed) { + v4l_fbuffer_free(file); + } + + for (i = 0; i < fh->v4l_buffers.num_buffers; i++) { + if (fh->v4l_buffers.buffer[i].fbuffer) + dprintk(2, + KERN_WARNING + "%s: v4l_fbuffer_alloc() - buffer %d allready allocated!?\n", + ZR_DEVNAME(zr), i); + + //udelay(20); + if (fh->v4l_buffers.buffer_size <= MAX_KMALLOC_MEM) { + /* Use kmalloc */ + + mem = kmalloc(fh->v4l_buffers.buffer_size, GFP_KERNEL); + if (!mem) { + dprintk(1, + KERN_ERR + "%s: v4l_fbuffer_alloc() - kmalloc for V4L buf %d failed\n", + ZR_DEVNAME(zr), i); + v4l_fbuffer_free(file); + return -ENOBUFS; + } + fh->v4l_buffers.buffer[i].fbuffer = mem; + fh->v4l_buffers.buffer[i].fbuffer_phys = + virt_to_phys(mem); + fh->v4l_buffers.buffer[i].fbuffer_bus = + virt_to_bus(mem); + for (off = 0; off < fh->v4l_buffers.buffer_size; + off += PAGE_SIZE) + SetPageReserved(MAP_NR(mem + off)); + dprintk(4, + KERN_INFO + "%s: v4l_fbuffer_alloc() - V4L frame %d mem 0x%lx (bus: 0x%lx)\n", + ZR_DEVNAME(zr), i, (unsigned long) mem, + virt_to_bus(mem)); + } else { + + /* Use high memory which has been left at boot time */ + + /* Ok., Ok. this is an evil hack - we make + * the assumption that physical addresses are + * the same as bus addresses (true at least + * for Intel processors). The whole method of + * obtaining and using this memory is not very + * nice - but I hope it saves some poor users + * from kernel hacking, which might have even + * more evil results */ + + if (i == 0) { + int size = + fh->v4l_buffers.num_buffers * + fh->v4l_buffers.buffer_size; + + pmem = get_high_mem(size); + if (pmem == 0) { + dprintk(1, + KERN_ERR + "%s: v4l_fbuffer_alloc() - get_high_mem (size = %d KB) for V4L bufs failed\n", + ZR_DEVNAME(zr), size >> 10); + return -ENOBUFS; + } + fh->v4l_buffers.buffer[0].fbuffer = NULL; + fh->v4l_buffers.buffer[0].fbuffer_phys = pmem; + fh->v4l_buffers.buffer[0].fbuffer_bus = pmem; + dprintk(4, + KERN_INFO + "%s: v4l_fbuffer_alloc() - using %d KB high memory\n", + ZR_DEVNAME(zr), size >> 10); + } else { + fh->v4l_buffers.buffer[i].fbuffer = NULL; + fh->v4l_buffers.buffer[i].fbuffer_phys = + pmem + i * fh->v4l_buffers.buffer_size; + fh->v4l_buffers.buffer[i].fbuffer_bus = + pmem + i * fh->v4l_buffers.buffer_size; + } + } + } + + fh->v4l_buffers.allocated = 1; + + return 0; +} + +/* free the V4L grab buffers */ +static void +v4l_fbuffer_free (struct file *file) +{ + struct zoran_fh *fh = file->private_data; + struct zoran *zr = fh->zr; + int i, off; + unsigned char *mem; + + dprintk(4, KERN_INFO "%s: v4l_fbuffer_free()\n", ZR_DEVNAME(zr)); + + for (i = 0; i < fh->v4l_buffers.num_buffers; i++) { + if (!fh->v4l_buffers.buffer[i].fbuffer) + continue; + + if (fh->v4l_buffers.buffer_size <= MAX_KMALLOC_MEM) { + mem = fh->v4l_buffers.buffer[i].fbuffer; + for (off = 0; off < fh->v4l_buffers.buffer_size; + off += PAGE_SIZE) + ClearPageReserved(MAP_NR(mem + off)); + kfree((void *) fh->v4l_buffers.buffer[i].fbuffer); + } + fh->v4l_buffers.buffer[i].fbuffer = NULL; + } + + fh->v4l_buffers.allocated = 0; + fh->v4l_buffers.ready_to_be_freed = 0; +} + +/* + * Allocate the MJPEG grab buffers. + * + * If the requested buffer size is smaller than MAX_KMALLOC_MEM, + * kmalloc is used to request a physically contiguous area, + * else we allocate the memory in framgents with get_zeroed_page. + * + * If a Natoma chipset is present and this is a revision 1 zr36057, + * each MJPEG buffer needs to be physically contiguous. + * (RJ: This statement is from Dave Perks' original driver, + * I could never check it because I have a zr36067) + * The driver cares about this because it reduces the buffer + * size to MAX_KMALLOC_MEM in that case (which forces contiguous allocation). + * + * RJ: The contents grab buffers needs never be accessed in the driver. + * Therefore there is no need to allocate them with vmalloc in order + * to get a contiguous virtual memory space. + * I don't understand why many other drivers first allocate them with + * vmalloc (which uses internally also get_zeroed_page, but delivers you + * virtual addresses) and then again have to make a lot of efforts + * to get the physical address. + * + * Ben Capper: + * On big-endian architectures (such as ppc) some extra steps + * are needed. When reading and writing to the stat_com array + * and fragment buffers, the device expects to see little- + * endian values. The use of cpu_to_le32() and le32_to_cpu() + * in this function (and one or two others in zoran_device.c) + * ensure that these values are always stored in little-endian + * form, regardless of architecture. The zr36057 does Very Bad + * Things on big endian architectures if the stat_com array + * and fragment buffers are not little-endian. + */ + +static int +jpg_fbuffer_alloc (struct file *file) +{ + struct zoran_fh *fh = file->private_data; + struct zoran *zr = fh->zr; + int i, j, off; + unsigned long mem; + + /* we might have old buffers lying around */ + if (fh->jpg_buffers.ready_to_be_freed) { + jpg_fbuffer_free(file); + } + + for (i = 0; i < fh->jpg_buffers.num_buffers; i++) { + if (fh->jpg_buffers.buffer[i].frag_tab) + dprintk(2, + KERN_WARNING + "%s: jpg_fbuffer_alloc() - buffer %d allready allocated!?\n", + ZR_DEVNAME(zr), i); + + /* Allocate fragment table for this buffer */ + + mem = get_zeroed_page(GFP_KERNEL); + if (mem == 0) { + dprintk(1, + KERN_ERR + "%s: jpg_fbuffer_alloc() - get_zeroed_page (frag_tab) failed for buffer %d\n", + ZR_DEVNAME(zr), i); + jpg_fbuffer_free(file); + return -ENOBUFS; + } + fh->jpg_buffers.buffer[i].frag_tab = (__le32 *) mem; + fh->jpg_buffers.buffer[i].frag_tab_bus = + virt_to_bus((void *) mem); + + //if (alloc_contig) { + if (fh->jpg_buffers.need_contiguous) { + mem = + (unsigned long) kmalloc(fh->jpg_buffers. + buffer_size, + GFP_KERNEL); + if (mem == 0) { + dprintk(1, + KERN_ERR + "%s: jpg_fbuffer_alloc() - kmalloc failed for buffer %d\n", + ZR_DEVNAME(zr), i); + jpg_fbuffer_free(file); + return -ENOBUFS; + } + fh->jpg_buffers.buffer[i].frag_tab[0] = + cpu_to_le32(virt_to_bus((void *) mem)); + fh->jpg_buffers.buffer[i].frag_tab[1] = + cpu_to_le32(((fh->jpg_buffers.buffer_size / 4) << 1) | 1); + for (off = 0; off < fh->jpg_buffers.buffer_size; + off += PAGE_SIZE) + SetPageReserved(MAP_NR(mem + off)); + } else { + /* jpg_bufsize is allreay page aligned */ + for (j = 0; + j < fh->jpg_buffers.buffer_size / PAGE_SIZE; + j++) { + mem = get_zeroed_page(GFP_KERNEL); + if (mem == 0) { + dprintk(1, + KERN_ERR + "%s: jpg_fbuffer_alloc() - get_zeroed_page failed for buffer %d\n", + ZR_DEVNAME(zr), i); + jpg_fbuffer_free(file); + return -ENOBUFS; + } + + fh->jpg_buffers.buffer[i].frag_tab[2 * j] = + cpu_to_le32(virt_to_bus((void *) mem)); + fh->jpg_buffers.buffer[i].frag_tab[2 * j + + 1] = + cpu_to_le32((PAGE_SIZE / 4) << 1); + SetPageReserved(MAP_NR(mem)); + } + + fh->jpg_buffers.buffer[i].frag_tab[2 * j - 1] |= cpu_to_le32(1); + } + } + + dprintk(4, + KERN_DEBUG "%s: jpg_fbuffer_alloc() - %d KB allocated\n", + ZR_DEVNAME(zr), + (fh->jpg_buffers.num_buffers * + fh->jpg_buffers.buffer_size) >> 10); + + fh->jpg_buffers.allocated = 1; + + return 0; +} + +/* free the MJPEG grab buffers */ +static void +jpg_fbuffer_free (struct file *file) +{ + struct zoran_fh *fh = file->private_data; + struct zoran *zr = fh->zr; + int i, j, off; + unsigned char *mem; + + dprintk(4, KERN_DEBUG "%s: jpg_fbuffer_free()\n", ZR_DEVNAME(zr)); + + for (i = 0; i < fh->jpg_buffers.num_buffers; i++) { + if (!fh->jpg_buffers.buffer[i].frag_tab) + continue; + + //if (alloc_contig) { + if (fh->jpg_buffers.need_contiguous) { + if (fh->jpg_buffers.buffer[i].frag_tab[0]) { + mem = (unsigned char *) bus_to_virt(le32_to_cpu( + fh->jpg_buffers.buffer[i].frag_tab[0])); + for (off = 0; + off < fh->jpg_buffers.buffer_size; + off += PAGE_SIZE) + ClearPageReserved(MAP_NR + (mem + off)); + kfree(mem); + fh->jpg_buffers.buffer[i].frag_tab[0] = 0; + fh->jpg_buffers.buffer[i].frag_tab[1] = 0; + } + } else { + for (j = 0; + j < fh->jpg_buffers.buffer_size / PAGE_SIZE; + j++) { + if (!fh->jpg_buffers.buffer[i]. + frag_tab[2 * j]) + break; + ClearPageReserved(MAP_NR + (bus_to_virt + (le32_to_cpu + (fh->jpg_buffers. + buffer[i].frag_tab[2 * + j])))); + free_page((unsigned long) + bus_to_virt + (le32_to_cpu + (fh->jpg_buffers. + buffer[i]. + frag_tab[2 * j]))); + fh->jpg_buffers.buffer[i].frag_tab[2 * j] = + 0; + fh->jpg_buffers.buffer[i].frag_tab[2 * j + + 1] = 0; + } + } + + free_page((unsigned long) fh->jpg_buffers.buffer[i]. + frag_tab); + fh->jpg_buffers.buffer[i].frag_tab = NULL; + } + + fh->jpg_buffers.allocated = 0; + fh->jpg_buffers.ready_to_be_freed = 0; +} + +/* + * V4L Buffer grabbing + */ + +static int +zoran_v4l_set_format (struct file *file, + int width, + int height, + const struct zoran_format *format) +{ + struct zoran_fh *fh = file->private_data; + struct zoran *zr = fh->zr; + int bpp; + + /* Check size and format of the grab wanted */ + + if (height < BUZ_MIN_HEIGHT || width < BUZ_MIN_WIDTH || + height > BUZ_MAX_HEIGHT || width > BUZ_MAX_WIDTH) { + dprintk(1, + KERN_ERR + "%s: v4l_set_format() - wrong frame size (%dx%d)\n", + ZR_DEVNAME(zr), width, height); + return -EINVAL; + } + + bpp = (format->depth + 7) / 8; + + /* Check against available buffer size */ + if (height * width * bpp > fh->v4l_buffers.buffer_size) { + dprintk(1, + KERN_ERR + "%s: v4l_set_format() - video buffer size (%d kB) is too small\n", + ZR_DEVNAME(zr), fh->v4l_buffers.buffer_size >> 10); + return -EINVAL; + } + + /* The video front end needs 4-byte alinged line sizes */ + + if ((bpp == 2 && (width & 1)) || (bpp == 3 && (width & 3))) { + dprintk(1, + KERN_ERR + "%s: v4l_set_format() - wrong frame alingment\n", + ZR_DEVNAME(zr)); + return -EINVAL; + } + + fh->v4l_settings.width = width; + fh->v4l_settings.height = height; + fh->v4l_settings.format = format; + fh->v4l_settings.bytesperline = bpp * fh->v4l_settings.width; + + return 0; +} + +static int +zoran_v4l_queue_frame (struct file *file, + int num) +{ + struct zoran_fh *fh = file->private_data; + struct zoran *zr = fh->zr; + unsigned long flags; + int res = 0; + + if (!fh->v4l_buffers.allocated) { + dprintk(1, + KERN_ERR + "%s: v4l_queue_frame() - buffers not yet allocated\n", + ZR_DEVNAME(zr)); + res = -ENOMEM; + } + + /* No grabbing outside the buffer range! */ + if (num >= fh->v4l_buffers.num_buffers || num < 0) { + dprintk(1, + KERN_ERR + "%s: v4l_queue_frame() - buffer %d is out of range\n", + ZR_DEVNAME(zr), num); + res = -EINVAL; + } + + spin_lock_irqsave(&zr->spinlock, flags); + + if (fh->v4l_buffers.active == ZORAN_FREE) { + if (zr->v4l_buffers.active == ZORAN_FREE) { + zr->v4l_buffers = fh->v4l_buffers; + fh->v4l_buffers.active = ZORAN_ACTIVE; + } else { + dprintk(1, + KERN_ERR + "%s: v4l_queue_frame() - another session is already capturing\n", + ZR_DEVNAME(zr)); + res = -EBUSY; + } + } + + /* make sure a grab isn't going on currently with this buffer */ + if (!res) { + switch (zr->v4l_buffers.buffer[num].state) { + default: + case BUZ_STATE_PEND: + if (zr->v4l_buffers.active == ZORAN_FREE) { + fh->v4l_buffers.active = ZORAN_FREE; + zr->v4l_buffers.allocated = 0; + } + res = -EBUSY; /* what are you doing? */ + break; + case BUZ_STATE_DONE: + dprintk(2, + KERN_WARNING + "%s: v4l_queue_frame() - queueing buffer %d in state DONE!?\n", + ZR_DEVNAME(zr), num); + case BUZ_STATE_USER: + /* since there is at least one unused buffer there's room for at least + * one more pend[] entry */ + zr->v4l_pend[zr->v4l_pend_head++ & + V4L_MASK_FRAME] = num; + zr->v4l_buffers.buffer[num].state = BUZ_STATE_PEND; + zr->v4l_buffers.buffer[num].bs.length = + fh->v4l_settings.bytesperline * + zr->v4l_settings.height; + fh->v4l_buffers.buffer[num] = + zr->v4l_buffers.buffer[num]; + break; + } + } + + spin_unlock_irqrestore(&zr->spinlock, flags); + + if (!res && zr->v4l_buffers.active == ZORAN_FREE) + zr->v4l_buffers.active = fh->v4l_buffers.active; + + return res; +} + +static int +v4l_grab (struct file *file, + struct video_mmap *mp) +{ + struct zoran_fh *fh = file->private_data; + struct zoran *zr = fh->zr; + int res = 0, i; + + for (i = 0; i < NUM_FORMATS; i++) { + if (zoran_formats[i].palette == mp->format && + zoran_formats[i].flags & ZORAN_FORMAT_CAPTURE && + !(zoran_formats[i].flags & ZORAN_FORMAT_COMPRESSED)) + break; + } + if (i == NUM_FORMATS || zoran_formats[i].depth == 0) { + dprintk(1, + KERN_ERR + "%s: v4l_grab() - wrong bytes-per-pixel format\n", + ZR_DEVNAME(zr)); + return -EINVAL; + } + + /* + * To minimize the time spent in the IRQ routine, we avoid setting up + * the video front end there. + * If this grab has different parameters from a running streaming capture + * we stop the streaming capture and start it over again. + */ + if (zr->v4l_memgrab_active && + (zr->v4l_settings.width != mp->width || + zr->v4l_settings.height != mp->height || + zr->v4l_settings.format->palette != mp->format)) { + res = wait_grab_pending(zr); + if (res) + return res; + } + if ((res = zoran_v4l_set_format(file, + mp->width, + mp->height, + &zoran_formats[i]))) + return res; + zr->v4l_settings = fh->v4l_settings; + + /* queue the frame in the pending queue */ + if ((res = zoran_v4l_queue_frame(file, mp->frame))) { + fh->v4l_buffers.active = ZORAN_FREE; + return res; + } + + /* put the 36057 into frame grabbing mode */ + if (!res && !zr->v4l_memgrab_active) + zr36057_set_memgrab(zr, 1); + + //dprintk(4, KERN_INFO "%s: Frame grab 3...\n", ZR_DEVNAME(zr)); + + return res; +} + +/* + * Sync on a V4L buffer + */ + +static int +v4l_sync (struct file *file, + int frame) +{ + struct zoran_fh *fh = file->private_data; + struct zoran *zr = fh->zr; + unsigned long flags; + + if (fh->v4l_buffers.active == ZORAN_FREE) { + dprintk(1, + KERN_ERR + "%s: v4l_sync() - no grab active for this session\n", + ZR_DEVNAME(zr)); + return -EINVAL; + } + + /* check passed-in frame number */ + if (frame >= fh->v4l_buffers.num_buffers || frame < 0) { + dprintk(1, + KERN_ERR "%s: v4l_sync() - frame %d is invalid\n", + ZR_DEVNAME(zr), frame); + return -EINVAL; + } + + /* Check if is buffer was queued at all */ + if (zr->v4l_buffers.buffer[frame].state == BUZ_STATE_USER) { + dprintk(1, + KERN_ERR + "%s: v4l_sync() - attempt to sync on a buffer which was not queued?\n", + ZR_DEVNAME(zr)); + return -EPROTO; + } + + /* wait on this buffer to get ready */ + if (!wait_event_interruptible_timeout(zr->v4l_capq, + (zr->v4l_buffers.buffer[frame].state != BUZ_STATE_PEND), + 10*HZ)) + return -ETIME; + if (signal_pending(current)) + return -ERESTARTSYS; + + /* buffer should now be in BUZ_STATE_DONE */ + if (zr->v4l_buffers.buffer[frame].state != BUZ_STATE_DONE) + dprintk(2, + KERN_ERR "%s: v4l_sync() - internal state error\n", + ZR_DEVNAME(zr)); + + zr->v4l_buffers.buffer[frame].state = BUZ_STATE_USER; + fh->v4l_buffers.buffer[frame] = zr->v4l_buffers.buffer[frame]; + + spin_lock_irqsave(&zr->spinlock, flags); + + /* Check if streaming capture has finished */ + if (zr->v4l_pend_tail == zr->v4l_pend_head) { + zr36057_set_memgrab(zr, 0); + if (zr->v4l_buffers.active == ZORAN_ACTIVE) { + fh->v4l_buffers.active = zr->v4l_buffers.active = + ZORAN_FREE; + zr->v4l_buffers.allocated = 0; + } + } + + spin_unlock_irqrestore(&zr->spinlock, flags); + + return 0; +} + +/* + * Queue a MJPEG buffer for capture/playback + */ + +static int +zoran_jpg_queue_frame (struct file *file, + int num, + enum zoran_codec_mode mode) +{ + struct zoran_fh *fh = file->private_data; + struct zoran *zr = fh->zr; + unsigned long flags; + int res = 0; + + /* Check if buffers are allocated */ + if (!fh->jpg_buffers.allocated) { + dprintk(1, + KERN_ERR + "%s: jpg_queue_frame() - buffers not yet allocated\n", + ZR_DEVNAME(zr)); + return -ENOMEM; + } + + /* No grabbing outside the buffer range! */ + if (num >= fh->jpg_buffers.num_buffers || num < 0) { + dprintk(1, + KERN_ERR + "%s: jpg_queue_frame() - buffer %d out of range\n", + ZR_DEVNAME(zr), num); + return -EINVAL; + } + + /* what is the codec mode right now? */ + if (zr->codec_mode == BUZ_MODE_IDLE) { + zr->jpg_settings = fh->jpg_settings; + } else if (zr->codec_mode != mode) { + /* wrong codec mode active - invalid */ + dprintk(1, + KERN_ERR + "%s: jpg_queue_frame() - codec in wrong mode\n", + ZR_DEVNAME(zr)); + return -EINVAL; + } + + if (fh->jpg_buffers.active == ZORAN_FREE) { + if (zr->jpg_buffers.active == ZORAN_FREE) { + zr->jpg_buffers = fh->jpg_buffers; + fh->jpg_buffers.active = ZORAN_ACTIVE; + } else { + dprintk(1, + KERN_ERR + "%s: jpg_queue_frame() - another session is already capturing\n", + ZR_DEVNAME(zr)); + res = -EBUSY; + } + } + + if (!res && zr->codec_mode == BUZ_MODE_IDLE) { + /* Ok load up the jpeg codec */ + zr36057_enable_jpg(zr, mode); + } + + spin_lock_irqsave(&zr->spinlock, flags); + + if (!res) { + switch (zr->jpg_buffers.buffer[num].state) { + case BUZ_STATE_DONE: + dprintk(2, + KERN_WARNING + "%s: jpg_queue_frame() - queing frame in BUZ_STATE_DONE state!?\n", + ZR_DEVNAME(zr)); + case BUZ_STATE_USER: + /* since there is at least one unused buffer there's room for at + *least one more pend[] entry */ + zr->jpg_pend[zr->jpg_que_head++ & BUZ_MASK_FRAME] = + num; + zr->jpg_buffers.buffer[num].state = BUZ_STATE_PEND; + fh->jpg_buffers.buffer[num] = + zr->jpg_buffers.buffer[num]; + zoran_feed_stat_com(zr); + break; + default: + case BUZ_STATE_DMA: + case BUZ_STATE_PEND: + if (zr->jpg_buffers.active == ZORAN_FREE) { + fh->jpg_buffers.active = ZORAN_FREE; + zr->jpg_buffers.allocated = 0; + } + res = -EBUSY; /* what are you doing? */ + break; + } + } + + spin_unlock_irqrestore(&zr->spinlock, flags); + + if (!res && zr->jpg_buffers.active == ZORAN_FREE) { + zr->jpg_buffers.active = fh->jpg_buffers.active; + } + + return res; +} + +static int +jpg_qbuf (struct file *file, + int frame, + enum zoran_codec_mode mode) +{ + struct zoran_fh *fh = file->private_data; + struct zoran *zr = fh->zr; + int res = 0; + + /* Does the user want to stop streaming? */ + if (frame < 0) { + if (zr->codec_mode == mode) { + if (fh->jpg_buffers.active == ZORAN_FREE) { + dprintk(1, + KERN_ERR + "%s: jpg_qbuf(-1) - session not active\n", + ZR_DEVNAME(zr)); + return -EINVAL; + } + fh->jpg_buffers.active = zr->jpg_buffers.active = + ZORAN_FREE; + zr->jpg_buffers.allocated = 0; + zr36057_enable_jpg(zr, BUZ_MODE_IDLE); + return 0; + } else { + dprintk(1, + KERN_ERR + "%s: jpg_qbuf() - stop streaming but not in streaming mode\n", + ZR_DEVNAME(zr)); + return -EINVAL; + } + } + + if ((res = zoran_jpg_queue_frame(file, frame, mode))) + return res; + + /* Start the jpeg codec when the first frame is queued */ + if (!res && zr->jpg_que_head == 1) + jpeg_start(zr); + + return res; +} + +/* + * Sync on a MJPEG buffer + */ + +static int +jpg_sync (struct file *file, + struct zoran_sync *bs) +{ + struct zoran_fh *fh = file->private_data; + struct zoran *zr = fh->zr; + unsigned long flags; + int frame; + + if (fh->jpg_buffers.active == ZORAN_FREE) { + dprintk(1, + KERN_ERR + "%s: jpg_sync() - capture is not currently active\n", + ZR_DEVNAME(zr)); + return -EINVAL; + } + if (zr->codec_mode != BUZ_MODE_MOTION_DECOMPRESS && + zr->codec_mode != BUZ_MODE_MOTION_COMPRESS) { + dprintk(1, + KERN_ERR + "%s: jpg_sync() - codec not in streaming mode\n", + ZR_DEVNAME(zr)); + return -EINVAL; + } + if (!wait_event_interruptible_timeout(zr->jpg_capq, + (zr->jpg_que_tail != zr->jpg_dma_tail || + zr->jpg_dma_tail == zr->jpg_dma_head), + 10*HZ)) { + int isr; + + btand(~ZR36057_JMC_Go_en, ZR36057_JMC); + udelay(1); + zr->codec->control(zr->codec, CODEC_G_STATUS, + sizeof(isr), &isr); + dprintk(1, + KERN_ERR + "%s: jpg_sync() - timeout: codec isr=0x%02x\n", + ZR_DEVNAME(zr), isr); + + return -ETIME; + + } + if (signal_pending(current)) + return -ERESTARTSYS; + + spin_lock_irqsave(&zr->spinlock, flags); + + if (zr->jpg_dma_tail != zr->jpg_dma_head) + frame = zr->jpg_pend[zr->jpg_que_tail++ & BUZ_MASK_FRAME]; + else + frame = zr->jpg_pend[zr->jpg_que_tail & BUZ_MASK_FRAME]; + + /* buffer should now be in BUZ_STATE_DONE */ + if (zr->jpg_buffers.buffer[frame].state != BUZ_STATE_DONE) + dprintk(2, + KERN_ERR "%s: jpg_sync() - internal state error\n", + ZR_DEVNAME(zr)); + + *bs = zr->jpg_buffers.buffer[frame].bs; + bs->frame = frame; + zr->jpg_buffers.buffer[frame].state = BUZ_STATE_USER; + fh->jpg_buffers.buffer[frame] = zr->jpg_buffers.buffer[frame]; + + spin_unlock_irqrestore(&zr->spinlock, flags); + + return 0; +} + +static void +zoran_open_init_session (struct file *file) +{ + int i; + struct zoran_fh *fh = file->private_data; + struct zoran *zr = fh->zr; + + /* Per default, map the V4L Buffers */ + fh->map_mode = ZORAN_MAP_MODE_RAW; + + /* take over the card's current settings */ + fh->overlay_settings = zr->overlay_settings; + fh->overlay_settings.is_set = 0; + fh->overlay_settings.format = zr->overlay_settings.format; + fh->overlay_active = ZORAN_FREE; + + /* v4l settings */ + fh->v4l_settings = zr->v4l_settings; + + /* v4l_buffers */ + memset(&fh->v4l_buffers, 0, sizeof(struct zoran_v4l_struct)); + for (i = 0; i < VIDEO_MAX_FRAME; i++) { + fh->v4l_buffers.buffer[i].state = BUZ_STATE_USER; /* nothing going on */ + fh->v4l_buffers.buffer[i].bs.frame = i; + } + fh->v4l_buffers.allocated = 0; + fh->v4l_buffers.ready_to_be_freed = 0; + fh->v4l_buffers.active = ZORAN_FREE; + fh->v4l_buffers.buffer_size = v4l_bufsize; + fh->v4l_buffers.num_buffers = v4l_nbufs; + + /* jpg settings */ + fh->jpg_settings = zr->jpg_settings; + + /* jpg_buffers */ + memset(&fh->jpg_buffers, 0, sizeof(struct zoran_jpg_struct)); + for (i = 0; i < BUZ_MAX_FRAME; i++) { + fh->jpg_buffers.buffer[i].state = BUZ_STATE_USER; /* nothing going on */ + fh->jpg_buffers.buffer[i].bs.frame = i; + } + fh->jpg_buffers.need_contiguous = zr->jpg_buffers.need_contiguous; + fh->jpg_buffers.allocated = 0; + fh->jpg_buffers.ready_to_be_freed = 0; + fh->jpg_buffers.active = ZORAN_FREE; + fh->jpg_buffers.buffer_size = jpg_bufsize; + fh->jpg_buffers.num_buffers = jpg_nbufs; +} + +static void +zoran_close_end_session (struct file *file) +{ + struct zoran_fh *fh = file->private_data; + struct zoran *zr = fh->zr; + + /* overlay */ + if (fh->overlay_active != ZORAN_FREE) { + fh->overlay_active = zr->overlay_active = ZORAN_FREE; + zr->v4l_overlay_active = 0; + if (!zr->v4l_memgrab_active) + zr36057_overlay(zr, 0); + zr->overlay_mask = NULL; + } + + /* v4l capture */ + if (fh->v4l_buffers.active != ZORAN_FREE) { + unsigned long flags; + + spin_lock_irqsave(&zr->spinlock, flags); + zr36057_set_memgrab(zr, 0); + zr->v4l_buffers.allocated = 0; + zr->v4l_buffers.active = fh->v4l_buffers.active = + ZORAN_FREE; + spin_unlock_irqrestore(&zr->spinlock, flags); + } + + /* v4l buffers */ + if (fh->v4l_buffers.allocated || + fh->v4l_buffers.ready_to_be_freed) { + v4l_fbuffer_free(file); + } + + /* jpg capture */ + if (fh->jpg_buffers.active != ZORAN_FREE) { + zr36057_enable_jpg(zr, BUZ_MODE_IDLE); + zr->jpg_buffers.allocated = 0; + zr->jpg_buffers.active = fh->jpg_buffers.active = + ZORAN_FREE; + } + + /* jpg buffers */ + if (fh->jpg_buffers.allocated || + fh->jpg_buffers.ready_to_be_freed) { + jpg_fbuffer_free(file); + } +} + +/* + * Open a zoran card. Right now the flags stuff is just playing + */ + +static int +zoran_open (struct inode *inode, + struct file *file) +{ + unsigned int minor = iminor(inode); + struct zoran *zr = NULL; + struct zoran_fh *fh; + int i, res, first_open = 0, have_module_locks = 0; + + lock_kernel(); + /* find the device */ + for (i = 0; i < zoran_num; i++) { + if (zoran[i]->video_dev->minor == minor) { + zr = zoran[i]; + break; + } + } + + if (!zr) { + dprintk(1, KERN_ERR "%s: device not found!\n", ZORAN_NAME); + res = -ENODEV; + goto open_unlock_and_return; + } + + /* see fs/device.c - the kernel already locks during open(), + * so locking ourselves only causes deadlocks */ + /*mutex_lock(&zr->resource_lock);*/ + + if (!zr->decoder) { + dprintk(1, + KERN_ERR "%s: no TV decoder loaded for device!\n", + ZR_DEVNAME(zr)); + res = -EIO; + goto open_unlock_and_return; + } + + /* try to grab a module lock */ + if (!try_module_get(THIS_MODULE)) { + dprintk(1, + KERN_ERR + "%s: failed to acquire my own lock! PANIC!\n", + ZR_DEVNAME(zr)); + res = -ENODEV; + goto open_unlock_and_return; + } + if (!try_module_get(zr->decoder->driver->driver.owner)) { + dprintk(1, + KERN_ERR + "%s: failed to grab ownership of i2c decoder\n", + ZR_DEVNAME(zr)); + res = -EIO; + module_put(THIS_MODULE); + goto open_unlock_and_return; + } + if (zr->encoder && + !try_module_get(zr->encoder->driver->driver.owner)) { + dprintk(1, + KERN_ERR + "%s: failed to grab ownership of i2c encoder\n", + ZR_DEVNAME(zr)); + res = -EIO; + module_put(zr->decoder->driver->driver.owner); + module_put(THIS_MODULE); + goto open_unlock_and_return; + } + + have_module_locks = 1; + + if (zr->user >= 2048) { + dprintk(1, KERN_ERR "%s: too many users (%d) on device\n", + ZR_DEVNAME(zr), zr->user); + res = -EBUSY; + goto open_unlock_and_return; + } + + dprintk(1, KERN_INFO "%s: zoran_open(%s, pid=[%d]), users(-)=%d\n", + ZR_DEVNAME(zr), current->comm, task_pid_nr(current), zr->user); + + /* now, create the open()-specific file_ops struct */ + fh = kzalloc(sizeof(struct zoran_fh), GFP_KERNEL); + if (!fh) { + dprintk(1, + KERN_ERR + "%s: zoran_open() - allocation of zoran_fh failed\n", + ZR_DEVNAME(zr)); + res = -ENOMEM; + goto open_unlock_and_return; + } + /* used to be BUZ_MAX_WIDTH/HEIGHT, but that gives overflows + * on norm-change! */ + fh->overlay_mask = + kmalloc(((768 + 31) / 32) * 576 * 4, GFP_KERNEL); + if (!fh->overlay_mask) { + dprintk(1, + KERN_ERR + "%s: zoran_open() - allocation of overlay_mask failed\n", + ZR_DEVNAME(zr)); + kfree(fh); + res = -ENOMEM; + goto open_unlock_and_return; + } + + if (zr->user++ == 0) + first_open = 1; + + /*mutex_unlock(&zr->resource_lock);*/ + + /* default setup - TODO: look at flags */ + if (first_open) { /* First device open */ + zr36057_restart(zr); + zoran_open_init_params(zr); + zoran_init_hardware(zr); + + btor(ZR36057_ICR_IntPinEn, ZR36057_ICR); + } + + /* set file_ops stuff */ + file->private_data = fh; + fh->zr = zr; + zoran_open_init_session(file); + unlock_kernel(); + + return 0; + +open_unlock_and_return: + /* if we grabbed locks, release them accordingly */ + if (have_module_locks) { + module_put(zr->decoder->driver->driver.owner); + if (zr->encoder) { + module_put(zr->encoder->driver->driver.owner); + } + module_put(THIS_MODULE); + } + + /* if there's no device found, we didn't obtain the lock either */ + if (zr) { + /*mutex_unlock(&zr->resource_lock);*/ + } + unlock_kernel(); + + return res; +} + +static int +zoran_close (struct inode *inode, + struct file *file) +{ + struct zoran_fh *fh = file->private_data; + struct zoran *zr = fh->zr; + + dprintk(1, KERN_INFO "%s: zoran_close(%s, pid=[%d]), users(+)=%d\n", + ZR_DEVNAME(zr), current->comm, task_pid_nr(current), zr->user); + + /* kernel locks (fs/device.c), so don't do that ourselves + * (prevents deadlocks) */ + /*mutex_lock(&zr->resource_lock);*/ + + zoran_close_end_session(file); + + if (zr->user-- == 1) { /* Last process */ + /* Clean up JPEG process */ + wake_up_interruptible(&zr->jpg_capq); + zr36057_enable_jpg(zr, BUZ_MODE_IDLE); + zr->jpg_buffers.allocated = 0; + zr->jpg_buffers.active = ZORAN_FREE; + + /* disable interrupts */ + btand(~ZR36057_ICR_IntPinEn, ZR36057_ICR); + + if (zr36067_debug > 1) + print_interrupts(zr); + + /* Overlay off */ + zr->v4l_overlay_active = 0; + zr36057_overlay(zr, 0); + zr->overlay_mask = NULL; + + /* capture off */ + wake_up_interruptible(&zr->v4l_capq); + zr36057_set_memgrab(zr, 0); + zr->v4l_buffers.allocated = 0; + zr->v4l_buffers.active = ZORAN_FREE; + zoran_set_pci_master(zr, 0); + + if (!pass_through) { /* Switch to color bar */ + int zero = 0, two = 2; + decoder_command(zr, DECODER_ENABLE_OUTPUT, &zero); + encoder_command(zr, ENCODER_SET_INPUT, &two); + } + } + + file->private_data = NULL; + kfree(fh->overlay_mask); + kfree(fh); + + /* release locks on the i2c modules */ + module_put(zr->decoder->driver->driver.owner); + if (zr->encoder) { + module_put(zr->encoder->driver->driver.owner); + } + module_put(THIS_MODULE); + + /*mutex_unlock(&zr->resource_lock);*/ + + dprintk(4, KERN_INFO "%s: zoran_close() done\n", ZR_DEVNAME(zr)); + + return 0; +} + + +static ssize_t +zoran_read (struct file *file, + char __user *data, + size_t count, + loff_t *ppos) +{ + /* we simply don't support read() (yet)... */ + + return -EINVAL; +} + +static ssize_t +zoran_write (struct file *file, + const char __user *data, + size_t count, + loff_t *ppos) +{ + /* ...and the same goes for write() */ + + return -EINVAL; +} + +static int +setup_fbuffer (struct file *file, + void *base, + const struct zoran_format *fmt, + int width, + int height, + int bytesperline) +{ + struct zoran_fh *fh = file->private_data; + struct zoran *zr = fh->zr; + + /* (Ronald) v4l/v4l2 guidelines */ + if (!capable(CAP_SYS_ADMIN) && !capable(CAP_SYS_RAWIO)) + return -EPERM; + + /* Don't allow frame buffer overlay if PCI or AGP is buggy, or on + ALi Magik (that needs very low latency while the card needs a + higher value always) */ + + if (pci_pci_problems & (PCIPCI_FAIL | PCIAGP_FAIL | PCIPCI_ALIMAGIK)) + return -ENXIO; + + /* we need a bytesperline value, even if not given */ + if (!bytesperline) + bytesperline = width * ((fmt->depth + 7) & ~7) / 8; + +#if 0 + if (zr->overlay_active) { + /* dzjee... stupid users... don't even bother to turn off + * overlay before changing the memory location... + * normally, we would return errors here. However, one of + * the tools that does this is... xawtv! and since xawtv + * is used by +/- 99% of the users, we'd rather be user- + * friendly and silently do as if nothing went wrong */ + dprintk(3, + KERN_ERR + "%s: setup_fbuffer() - forced overlay turnoff because framebuffer changed\n", + ZR_DEVNAME(zr)); + zr36057_overlay(zr, 0); + } +#endif + + if (!(fmt->flags & ZORAN_FORMAT_OVERLAY)) { + dprintk(1, + KERN_ERR + "%s: setup_fbuffer() - no valid overlay format given\n", + ZR_DEVNAME(zr)); + return -EINVAL; + } + if (height <= 0 || width <= 0 || bytesperline <= 0) { + dprintk(1, + KERN_ERR + "%s: setup_fbuffer() - invalid height/width/bpl value (%d|%d|%d)\n", + ZR_DEVNAME(zr), width, height, bytesperline); + return -EINVAL; + } + if (bytesperline & 3) { + dprintk(1, + KERN_ERR + "%s: setup_fbuffer() - bytesperline (%d) must be 4-byte aligned\n", + ZR_DEVNAME(zr), bytesperline); + return -EINVAL; + } + + zr->buffer.base = (void *) ((unsigned long) base & ~3); + zr->buffer.height = height; + zr->buffer.width = width; + zr->buffer.depth = fmt->depth; + zr->overlay_settings.format = fmt; + zr->buffer.bytesperline = bytesperline; + + /* The user should set new window parameters */ + zr->overlay_settings.is_set = 0; + + return 0; +} + + +static int +setup_window (struct file *file, + int x, + int y, + int width, + int height, + struct video_clip __user *clips, + int clipcount, + void __user *bitmap) +{ + struct zoran_fh *fh = file->private_data; + struct zoran *zr = fh->zr; + struct video_clip *vcp = NULL; + int on, end; + + + if (!zr->buffer.base) { + dprintk(1, + KERN_ERR + "%s: setup_window() - frame buffer has to be set first\n", + ZR_DEVNAME(zr)); + return -EINVAL; + } + + if (!fh->overlay_settings.format) { + dprintk(1, + KERN_ERR + "%s: setup_window() - no overlay format set\n", + ZR_DEVNAME(zr)); + return -EINVAL; + } + + /* + * The video front end needs 4-byte alinged line sizes, we correct that + * silently here if necessary + */ + if (zr->buffer.depth == 15 || zr->buffer.depth == 16) { + end = (x + width) & ~1; /* round down */ + x = (x + 1) & ~1; /* round up */ + width = end - x; + } + + if (zr->buffer.depth == 24) { + end = (x + width) & ~3; /* round down */ + x = (x + 3) & ~3; /* round up */ + width = end - x; + } + + if (width > BUZ_MAX_WIDTH) + width = BUZ_MAX_WIDTH; + if (height > BUZ_MAX_HEIGHT) + height = BUZ_MAX_HEIGHT; + + /* Check for vaild parameters */ + if (width < BUZ_MIN_WIDTH || height < BUZ_MIN_HEIGHT || + width > BUZ_MAX_WIDTH || height > BUZ_MAX_HEIGHT) { + dprintk(1, + KERN_ERR + "%s: setup_window() - width = %d or height = %d invalid\n", + ZR_DEVNAME(zr), width, height); + return -EINVAL; + } + + fh->overlay_settings.x = x; + fh->overlay_settings.y = y; + fh->overlay_settings.width = width; + fh->overlay_settings.height = height; + fh->overlay_settings.clipcount = clipcount; + + /* + * If an overlay is running, we have to switch it off + * and switch it on again in order to get the new settings in effect. + * + * We also want to avoid that the overlay mask is written + * when an overlay is running. + */ + + on = zr->v4l_overlay_active && !zr->v4l_memgrab_active && + zr->overlay_active != ZORAN_FREE && + fh->overlay_active != ZORAN_FREE; + if (on) + zr36057_overlay(zr, 0); + + /* + * Write the overlay mask if clips are wanted. + * We prefer a bitmap. + */ + if (bitmap) { + /* fake value - it just means we want clips */ + fh->overlay_settings.clipcount = 1; + + if (copy_from_user(fh->overlay_mask, bitmap, + (width * height + 7) / 8)) { + return -EFAULT; + } + } else if (clipcount > 0) { + /* write our own bitmap from the clips */ + vcp = vmalloc(sizeof(struct video_clip) * (clipcount + 4)); + if (vcp == NULL) { + dprintk(1, + KERN_ERR + "%s: setup_window() - Alloc of clip mask failed\n", + ZR_DEVNAME(zr)); + return -ENOMEM; + } + if (copy_from_user + (vcp, clips, sizeof(struct video_clip) * clipcount)) { + vfree(vcp); + return -EFAULT; + } + write_overlay_mask(file, vcp, clipcount); + vfree(vcp); + } + + fh->overlay_settings.is_set = 1; + if (fh->overlay_active != ZORAN_FREE && + zr->overlay_active != ZORAN_FREE) + zr->overlay_settings = fh->overlay_settings; + + if (on) + zr36057_overlay(zr, 1); + + /* Make sure the changes come into effect */ + return wait_grab_pending(zr); +} + +static int +setup_overlay (struct file *file, + int on) +{ + struct zoran_fh *fh = file->private_data; + struct zoran *zr = fh->zr; + + /* If there is nothing to do, return immediatly */ + if ((on && fh->overlay_active != ZORAN_FREE) || + (!on && fh->overlay_active == ZORAN_FREE)) + return 0; + + /* check whether we're touching someone else's overlay */ + if (on && zr->overlay_active != ZORAN_FREE && + fh->overlay_active == ZORAN_FREE) { + dprintk(1, + KERN_ERR + "%s: setup_overlay() - overlay is already active for another session\n", + ZR_DEVNAME(zr)); + return -EBUSY; + } + if (!on && zr->overlay_active != ZORAN_FREE && + fh->overlay_active == ZORAN_FREE) { + dprintk(1, + KERN_ERR + "%s: setup_overlay() - you cannot cancel someone else's session\n", + ZR_DEVNAME(zr)); + return -EPERM; + } + + if (on == 0) { + zr->overlay_active = fh->overlay_active = ZORAN_FREE; + zr->v4l_overlay_active = 0; + /* When a grab is running, the video simply + * won't be switched on any more */ + if (!zr->v4l_memgrab_active) + zr36057_overlay(zr, 0); + zr->overlay_mask = NULL; + } else { + if (!zr->buffer.base || !fh->overlay_settings.is_set) { + dprintk(1, + KERN_ERR + "%s: setup_overlay() - buffer or window not set\n", + ZR_DEVNAME(zr)); + return -EINVAL; + } + if (!fh->overlay_settings.format) { + dprintk(1, + KERN_ERR + "%s: setup_overlay() - no overlay format set\n", + ZR_DEVNAME(zr)); + return -EINVAL; + } + zr->overlay_active = fh->overlay_active = ZORAN_LOCKED; + zr->v4l_overlay_active = 1; + zr->overlay_mask = fh->overlay_mask; + zr->overlay_settings = fh->overlay_settings; + if (!zr->v4l_memgrab_active) + zr36057_overlay(zr, 1); + /* When a grab is running, the video will be + * switched on when grab is finished */ + } + + /* Make sure the changes come into effect */ + return wait_grab_pending(zr); +} + + /* get the status of a buffer in the clients buffer queue */ +static int +zoran_v4l2_buffer_status (struct file *file, + struct v4l2_buffer *buf, + int num) +{ + struct zoran_fh *fh = file->private_data; + struct zoran *zr = fh->zr; + + buf->flags = V4L2_BUF_FLAG_MAPPED; + + switch (fh->map_mode) { + case ZORAN_MAP_MODE_RAW: + + /* check range */ + if (num < 0 || num >= fh->v4l_buffers.num_buffers || + !fh->v4l_buffers.allocated) { + dprintk(1, + KERN_ERR + "%s: v4l2_buffer_status() - wrong number or buffers not allocated\n", + ZR_DEVNAME(zr)); + return -EINVAL; + } + + buf->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; + buf->length = fh->v4l_buffers.buffer_size; + + /* get buffer */ + buf->bytesused = fh->v4l_buffers.buffer[num].bs.length; + if (fh->v4l_buffers.buffer[num].state == BUZ_STATE_DONE || + fh->v4l_buffers.buffer[num].state == BUZ_STATE_USER) { + buf->sequence = fh->v4l_buffers.buffer[num].bs.seq; + buf->flags |= V4L2_BUF_FLAG_DONE; + buf->timestamp = + fh->v4l_buffers.buffer[num].bs.timestamp; + } else { + buf->flags |= V4L2_BUF_FLAG_QUEUED; + } + + if (fh->v4l_settings.height <= BUZ_MAX_HEIGHT / 2) + buf->field = V4L2_FIELD_TOP; + else + buf->field = V4L2_FIELD_INTERLACED; + + break; + + case ZORAN_MAP_MODE_JPG_REC: + case ZORAN_MAP_MODE_JPG_PLAY: + + /* check range */ + if (num < 0 || num >= fh->jpg_buffers.num_buffers || + !fh->jpg_buffers.allocated) { + dprintk(1, + KERN_ERR + "%s: v4l2_buffer_status() - wrong number or buffers not allocated\n", + ZR_DEVNAME(zr)); + return -EINVAL; + } + + buf->type = (fh->map_mode == ZORAN_MAP_MODE_JPG_REC) ? + V4L2_BUF_TYPE_VIDEO_CAPTURE : + V4L2_BUF_TYPE_VIDEO_OUTPUT; + buf->length = fh->jpg_buffers.buffer_size; + + /* these variables are only written after frame has been captured */ + if (fh->jpg_buffers.buffer[num].state == BUZ_STATE_DONE || + fh->jpg_buffers.buffer[num].state == BUZ_STATE_USER) { + buf->sequence = fh->jpg_buffers.buffer[num].bs.seq; + buf->timestamp = + fh->jpg_buffers.buffer[num].bs.timestamp; + buf->bytesused = + fh->jpg_buffers.buffer[num].bs.length; + buf->flags |= V4L2_BUF_FLAG_DONE; + } else { + buf->flags |= V4L2_BUF_FLAG_QUEUED; + } + + /* which fields are these? */ + if (fh->jpg_settings.TmpDcm != 1) + buf->field = + fh->jpg_settings. + odd_even ? V4L2_FIELD_TOP : V4L2_FIELD_BOTTOM; + else + buf->field = + fh->jpg_settings. + odd_even ? V4L2_FIELD_SEQ_TB : + V4L2_FIELD_SEQ_BT; + + break; + + default: + + dprintk(5, + KERN_ERR + "%s: v4l2_buffer_status() - invalid buffer type|map_mode (%d|%d)\n", + ZR_DEVNAME(zr), buf->type, fh->map_mode); + return -EINVAL; + } + + buf->memory = V4L2_MEMORY_MMAP; + buf->index = num; + buf->m.offset = buf->length * num; + + return 0; +} + +static int +zoran_set_norm (struct zoran *zr, + int norm) /* VIDEO_MODE_* */ +{ + int norm_encoder, on; + + if (zr->v4l_buffers.active != ZORAN_FREE || + zr->jpg_buffers.active != ZORAN_FREE) { + dprintk(1, + KERN_WARNING + "%s: set_norm() called while in playback/capture mode\n", + ZR_DEVNAME(zr)); + return -EBUSY; + } + + if (lock_norm && norm != zr->norm) { + if (lock_norm > 1) { + dprintk(1, + KERN_WARNING + "%s: set_norm() - TV standard is locked, can not switch norm\n", + ZR_DEVNAME(zr)); + return -EPERM; + } else { + dprintk(1, + KERN_WARNING + "%s: set_norm() - TV standard is locked, norm was not changed\n", + ZR_DEVNAME(zr)); + norm = zr->norm; + } + } + + if (norm != VIDEO_MODE_AUTO && + (norm < 0 || norm >= zr->card.norms || + !zr->card.tvn[norm])) { + dprintk(1, + KERN_ERR "%s: set_norm() - unsupported norm %d\n", + ZR_DEVNAME(zr), norm); + return -EINVAL; + } + + if (norm == VIDEO_MODE_AUTO) { + int status; + + /* if we have autodetect, ... */ + struct video_decoder_capability caps; + decoder_command(zr, DECODER_GET_CAPABILITIES, &caps); + if (!(caps.flags & VIDEO_DECODER_AUTO)) { + dprintk(1, KERN_ERR "%s: norm=auto unsupported\n", + ZR_DEVNAME(zr)); + return -EINVAL; + } + + decoder_command(zr, DECODER_SET_NORM, &norm); + + /* let changes come into effect */ + ssleep(2); + + decoder_command(zr, DECODER_GET_STATUS, &status); + if (!(status & DECODER_STATUS_GOOD)) { + dprintk(1, + KERN_ERR + "%s: set_norm() - no norm detected\n", + ZR_DEVNAME(zr)); + /* reset norm */ + decoder_command(zr, DECODER_SET_NORM, &zr->norm); + return -EIO; + } + + if (status & DECODER_STATUS_NTSC) + norm = VIDEO_MODE_NTSC; + else if (status & DECODER_STATUS_SECAM) + norm = VIDEO_MODE_SECAM; + else + norm = VIDEO_MODE_PAL; + } + zr->timing = zr->card.tvn[norm]; + norm_encoder = norm; + + /* We switch overlay off and on since a change in the + * norm needs different VFE settings */ + on = zr->overlay_active && !zr->v4l_memgrab_active; + if (on) + zr36057_overlay(zr, 0); + + decoder_command(zr, DECODER_SET_NORM, &norm); + encoder_command(zr, ENCODER_SET_NORM, &norm_encoder); + + if (on) + zr36057_overlay(zr, 1); + + /* Make sure the changes come into effect */ + zr->norm = norm; + + return 0; +} + +static int +zoran_set_input (struct zoran *zr, + int input) +{ + int realinput; + + if (input == zr->input) { + return 0; + } + + if (zr->v4l_buffers.active != ZORAN_FREE || + zr->jpg_buffers.active != ZORAN_FREE) { + dprintk(1, + KERN_WARNING + "%s: set_input() called while in playback/capture mode\n", + ZR_DEVNAME(zr)); + return -EBUSY; + } + + if (input < 0 || input >= zr->card.inputs) { + dprintk(1, + KERN_ERR + "%s: set_input() - unnsupported input %d\n", + ZR_DEVNAME(zr), input); + return -EINVAL; + } + + realinput = zr->card.input[input].muxsel; + zr->input = input; + + decoder_command(zr, DECODER_SET_INPUT, &realinput); + + return 0; +} + +/* + * ioctl routine + */ + +static int +zoran_do_ioctl (struct inode *inode, + struct file *file, + unsigned int cmd, + void *arg) +{ + struct zoran_fh *fh = file->private_data; + struct zoran *zr = fh->zr; + /* CAREFUL: used in multiple places here */ + struct zoran_jpg_settings settings; + + /* we might have older buffers lying around... We don't want + * to wait, but we do want to try cleaning them up ASAP. So + * we try to obtain the lock and free them. If that fails, we + * don't do anything and wait for the next turn. In the end, + * zoran_close() or a new allocation will still free them... + * This is just a 'the sooner the better' extra 'feature' + * + * We don't free the buffers right on munmap() because that + * causes oopses (kfree() inside munmap() oopses for no + * apparent reason - it's also not reproduceable in any way, + * but moving the free code outside the munmap() handler fixes + * all this... If someone knows why, please explain me (Ronald) + */ + if (mutex_trylock(&zr->resource_lock)) { + /* we obtained it! Let's try to free some things */ + if (fh->jpg_buffers.ready_to_be_freed) + jpg_fbuffer_free(file); + if (fh->v4l_buffers.ready_to_be_freed) + v4l_fbuffer_free(file); + + mutex_unlock(&zr->resource_lock); + } + + switch (cmd) { + + case VIDIOCGCAP: + { + struct video_capability *vcap = arg; + + dprintk(3, KERN_DEBUG "%s: VIDIOCGCAP\n", ZR_DEVNAME(zr)); + + memset(vcap, 0, sizeof(struct video_capability)); + strncpy(vcap->name, ZR_DEVNAME(zr), sizeof(vcap->name)-1); + vcap->type = ZORAN_VID_TYPE; + + vcap->channels = zr->card.inputs; + vcap->audios = 0; + mutex_lock(&zr->resource_lock); + vcap->maxwidth = BUZ_MAX_WIDTH; + vcap->maxheight = BUZ_MAX_HEIGHT; + vcap->minwidth = BUZ_MIN_WIDTH; + vcap->minheight = BUZ_MIN_HEIGHT; + mutex_unlock(&zr->resource_lock); + + return 0; + } + break; + + case VIDIOCGCHAN: + { + struct video_channel *vchan = arg; + int channel = vchan->channel; + + dprintk(3, KERN_DEBUG "%s: VIDIOCGCHAN - channel=%d\n", + ZR_DEVNAME(zr), vchan->channel); + + memset(vchan, 0, sizeof(struct video_channel)); + if (channel > zr->card.inputs || channel < 0) { + dprintk(1, + KERN_ERR + "%s: VIDIOCGCHAN on not existing channel %d\n", + ZR_DEVNAME(zr), channel); + return -EINVAL; + } + + strcpy(vchan->name, zr->card.input[channel].name); + + vchan->tuners = 0; + vchan->flags = 0; + vchan->type = VIDEO_TYPE_CAMERA; + mutex_lock(&zr->resource_lock); + vchan->norm = zr->norm; + mutex_unlock(&zr->resource_lock); + vchan->channel = channel; + + return 0; + } + break; + + /* RJ: the documentation at http://roadrunner.swansea.linux.org.uk/v4lapi.shtml says: + * + * * "The VIDIOCSCHAN ioctl takes an integer argument and switches the capture to this input." + * * ^^^^^^^ + * * The famos BTTV driver has it implemented with a struct video_channel argument + * * and we follow it for compatibility reasons + * * + * * BTW: this is the only way the user can set the norm! + */ + + case VIDIOCSCHAN: + { + struct video_channel *vchan = arg; + int res; + + dprintk(3, + KERN_DEBUG + "%s: VIDIOCSCHAN - channel=%d, norm=%d\n", + ZR_DEVNAME(zr), vchan->channel, vchan->norm); + + mutex_lock(&zr->resource_lock); + if ((res = zoran_set_input(zr, vchan->channel))) + goto schan_unlock_and_return; + if ((res = zoran_set_norm(zr, vchan->norm))) + goto schan_unlock_and_return; + + /* Make sure the changes come into effect */ + res = wait_grab_pending(zr); + schan_unlock_and_return: + mutex_unlock(&zr->resource_lock); + return res; + } + break; + + case VIDIOCGPICT: + { + struct video_picture *vpict = arg; + + dprintk(3, KERN_DEBUG "%s: VIDIOCGPICT\n", ZR_DEVNAME(zr)); + + memset(vpict, 0, sizeof(struct video_picture)); + mutex_lock(&zr->resource_lock); + vpict->hue = zr->hue; + vpict->brightness = zr->brightness; + vpict->contrast = zr->contrast; + vpict->colour = zr->saturation; + if (fh->overlay_settings.format) { + vpict->depth = fh->overlay_settings.format->depth; + vpict->palette = fh->overlay_settings.format->palette; + } else { + vpict->depth = 0; + } + mutex_unlock(&zr->resource_lock); + + return 0; + } + break; + + case VIDIOCSPICT: + { + struct video_picture *vpict = arg; + int i; + + dprintk(3, + KERN_DEBUG + "%s: VIDIOCSPICT - bri=%d, hue=%d, col=%d, con=%d, dep=%d, pal=%d\n", + ZR_DEVNAME(zr), vpict->brightness, vpict->hue, + vpict->colour, vpict->contrast, vpict->depth, + vpict->palette); + + for (i = 0; i < NUM_FORMATS; i++) { + const struct zoran_format *fmt = &zoran_formats[i]; + + if (fmt->palette != -1 && + fmt->flags & ZORAN_FORMAT_OVERLAY && + fmt->palette == vpict->palette && + fmt->depth == vpict->depth) + break; + } + if (i == NUM_FORMATS) { + dprintk(1, + KERN_ERR + "%s: VIDIOCSPICT - Invalid palette %d\n", + ZR_DEVNAME(zr), vpict->palette); + return -EINVAL; + } + + mutex_lock(&zr->resource_lock); + + decoder_command(zr, DECODER_SET_PICTURE, vpict); + + zr->hue = vpict->hue; + zr->contrast = vpict->contrast; + zr->saturation = vpict->colour; + zr->brightness = vpict->brightness; + + fh->overlay_settings.format = &zoran_formats[i]; + + mutex_unlock(&zr->resource_lock); + + return 0; + } + break; + + case VIDIOCCAPTURE: + { + int *on = arg, res; + + dprintk(3, KERN_DEBUG "%s: VIDIOCCAPTURE - on=%d\n", + ZR_DEVNAME(zr), *on); + + mutex_lock(&zr->resource_lock); + res = setup_overlay(file, *on); + mutex_unlock(&zr->resource_lock); + + return res; + } + break; + + case VIDIOCGWIN: + { + struct video_window *vwin = arg; + + dprintk(3, KERN_DEBUG "%s: VIDIOCGWIN\n", ZR_DEVNAME(zr)); + + memset(vwin, 0, sizeof(struct video_window)); + mutex_lock(&zr->resource_lock); + vwin->x = fh->overlay_settings.x; + vwin->y = fh->overlay_settings.y; + vwin->width = fh->overlay_settings.width; + vwin->height = fh->overlay_settings.height; + mutex_unlock(&zr->resource_lock); + vwin->clipcount = 0; + return 0; + } + break; + + case VIDIOCSWIN: + { + struct video_window *vwin = arg; + int res; + + dprintk(3, + KERN_DEBUG + "%s: VIDIOCSWIN - x=%d, y=%d, w=%d, h=%d, clipcount=%d\n", + ZR_DEVNAME(zr), vwin->x, vwin->y, vwin->width, + vwin->height, vwin->clipcount); + + mutex_lock(&zr->resource_lock); + res = + setup_window(file, vwin->x, vwin->y, vwin->width, + vwin->height, vwin->clips, + vwin->clipcount, NULL); + mutex_unlock(&zr->resource_lock); + + return res; + } + break; + + case VIDIOCGFBUF: + { + struct video_buffer *vbuf = arg; + + dprintk(3, KERN_DEBUG "%s: VIDIOCGFBUF\n", ZR_DEVNAME(zr)); + + mutex_lock(&zr->resource_lock); + *vbuf = zr->buffer; + mutex_unlock(&zr->resource_lock); + return 0; + } + break; + + case VIDIOCSFBUF: + { + struct video_buffer *vbuf = arg; + int i, res = 0; + + dprintk(3, + KERN_DEBUG + "%s: VIDIOCSFBUF - base=%p, w=%d, h=%d, depth=%d, bpl=%d\n", + ZR_DEVNAME(zr), vbuf->base, vbuf->width, + vbuf->height, vbuf->depth, vbuf->bytesperline); + + for (i = 0; i < NUM_FORMATS; i++) + if (zoran_formats[i].depth == vbuf->depth) + break; + if (i == NUM_FORMATS) { + dprintk(1, + KERN_ERR + "%s: VIDIOCSFBUF - invalid fbuf depth %d\n", + ZR_DEVNAME(zr), vbuf->depth); + return -EINVAL; + } + + mutex_lock(&zr->resource_lock); + res = + setup_fbuffer(file, vbuf->base, &zoran_formats[i], + vbuf->width, vbuf->height, + vbuf->bytesperline); + mutex_unlock(&zr->resource_lock); + + return res; + } + break; + + case VIDIOCSYNC: + { + int *frame = arg, res; + + dprintk(3, KERN_DEBUG "%s: VIDIOCSYNC - frame=%d\n", + ZR_DEVNAME(zr), *frame); + + mutex_lock(&zr->resource_lock); + res = v4l_sync(file, *frame); + mutex_unlock(&zr->resource_lock); + if (!res) + zr->v4l_sync_tail++; + return res; + } + break; + + case VIDIOCMCAPTURE: + { + struct video_mmap *vmap = arg; + int res; + + dprintk(3, + KERN_DEBUG + "%s: VIDIOCMCAPTURE - frame=%d, geom=%dx%d, fmt=%d\n", + ZR_DEVNAME(zr), vmap->frame, vmap->width, vmap->height, + vmap->format); + + mutex_lock(&zr->resource_lock); + res = v4l_grab(file, vmap); + mutex_unlock(&zr->resource_lock); + return res; + } + break; + + case VIDIOCGMBUF: + { + struct video_mbuf *vmbuf = arg; + int i, res = 0; + + dprintk(3, KERN_DEBUG "%s: VIDIOCGMBUF\n", ZR_DEVNAME(zr)); + + vmbuf->size = + fh->v4l_buffers.num_buffers * + fh->v4l_buffers.buffer_size; + vmbuf->frames = fh->v4l_buffers.num_buffers; + for (i = 0; i < vmbuf->frames; i++) { + vmbuf->offsets[i] = + i * fh->v4l_buffers.buffer_size; + } + + mutex_lock(&zr->resource_lock); + + if (fh->jpg_buffers.allocated || fh->v4l_buffers.allocated) { + dprintk(1, + KERN_ERR + "%s: VIDIOCGMBUF - buffers already allocated\n", + ZR_DEVNAME(zr)); + res = -EINVAL; + goto v4l1reqbuf_unlock_and_return; + } + + if (v4l_fbuffer_alloc(file)) { + res = -ENOMEM; + goto v4l1reqbuf_unlock_and_return; + } + + /* The next mmap will map the V4L buffers */ + fh->map_mode = ZORAN_MAP_MODE_RAW; + v4l1reqbuf_unlock_and_return: + mutex_unlock(&zr->resource_lock); + + return res; + } + break; + + case VIDIOCGUNIT: + { + struct video_unit *vunit = arg; + + dprintk(3, KERN_DEBUG "%s: VIDIOCGUNIT\n", ZR_DEVNAME(zr)); + + vunit->video = zr->video_dev->minor; + vunit->vbi = VIDEO_NO_UNIT; + vunit->radio = VIDEO_NO_UNIT; + vunit->audio = VIDEO_NO_UNIT; + vunit->teletext = VIDEO_NO_UNIT; + + return 0; + } + break; + + /* + * RJ: In principal we could support subcaptures for V4L grabbing. + * Not even the famous BTTV driver has them, however. + * If there should be a strong demand, one could consider + * to implement them. + */ + case VIDIOCGCAPTURE: + { + dprintk(3, KERN_ERR "%s: VIDIOCGCAPTURE not supported\n", + ZR_DEVNAME(zr)); + return -EINVAL; + } + break; + + case VIDIOCSCAPTURE: + { + dprintk(3, KERN_ERR "%s: VIDIOCSCAPTURE not supported\n", + ZR_DEVNAME(zr)); + return -EINVAL; + } + break; + + case BUZIOC_G_PARAMS: + { + struct zoran_params *bparams = arg; + + dprintk(3, KERN_DEBUG "%s: BUZIOC_G_PARAMS\n", ZR_DEVNAME(zr)); + + memset(bparams, 0, sizeof(struct zoran_params)); + bparams->major_version = MAJOR_VERSION; + bparams->minor_version = MINOR_VERSION; + + mutex_lock(&zr->resource_lock); + + bparams->norm = zr->norm; + bparams->input = zr->input; + + bparams->decimation = fh->jpg_settings.decimation; + bparams->HorDcm = fh->jpg_settings.HorDcm; + bparams->VerDcm = fh->jpg_settings.VerDcm; + bparams->TmpDcm = fh->jpg_settings.TmpDcm; + bparams->field_per_buff = fh->jpg_settings.field_per_buff; + bparams->img_x = fh->jpg_settings.img_x; + bparams->img_y = fh->jpg_settings.img_y; + bparams->img_width = fh->jpg_settings.img_width; + bparams->img_height = fh->jpg_settings.img_height; + bparams->odd_even = fh->jpg_settings.odd_even; + + bparams->quality = fh->jpg_settings.jpg_comp.quality; + bparams->APPn = fh->jpg_settings.jpg_comp.APPn; + bparams->APP_len = fh->jpg_settings.jpg_comp.APP_len; + memcpy(bparams->APP_data, + fh->jpg_settings.jpg_comp.APP_data, + sizeof(bparams->APP_data)); + bparams->COM_len = zr->jpg_settings.jpg_comp.COM_len; + memcpy(bparams->COM_data, + fh->jpg_settings.jpg_comp.COM_data, + sizeof(bparams->COM_data)); + bparams->jpeg_markers = + fh->jpg_settings.jpg_comp.jpeg_markers; + + mutex_unlock(&zr->resource_lock); + + bparams->VFIFO_FB = 0; + + return 0; + } + break; + + case BUZIOC_S_PARAMS: + { + struct zoran_params *bparams = arg; + int res = 0; + + dprintk(3, KERN_DEBUG "%s: BUZIOC_S_PARAMS\n", ZR_DEVNAME(zr)); + + settings.decimation = bparams->decimation; + settings.HorDcm = bparams->HorDcm; + settings.VerDcm = bparams->VerDcm; + settings.TmpDcm = bparams->TmpDcm; + settings.field_per_buff = bparams->field_per_buff; + settings.img_x = bparams->img_x; + settings.img_y = bparams->img_y; + settings.img_width = bparams->img_width; + settings.img_height = bparams->img_height; + settings.odd_even = bparams->odd_even; + + settings.jpg_comp.quality = bparams->quality; + settings.jpg_comp.APPn = bparams->APPn; + settings.jpg_comp.APP_len = bparams->APP_len; + memcpy(settings.jpg_comp.APP_data, bparams->APP_data, + sizeof(bparams->APP_data)); + settings.jpg_comp.COM_len = bparams->COM_len; + memcpy(settings.jpg_comp.COM_data, bparams->COM_data, + sizeof(bparams->COM_data)); + settings.jpg_comp.jpeg_markers = bparams->jpeg_markers; + + mutex_lock(&zr->resource_lock); + + if (zr->codec_mode != BUZ_MODE_IDLE) { + dprintk(1, + KERN_ERR + "%s: BUZIOC_S_PARAMS called, but Buz in capture/playback mode\n", + ZR_DEVNAME(zr)); + res = -EINVAL; + goto sparams_unlock_and_return; + } + + /* Check the params first before overwriting our + * nternal values */ + if (zoran_check_jpg_settings(zr, &settings)) { + res = -EINVAL; + goto sparams_unlock_and_return; + } + + fh->jpg_settings = settings; + sparams_unlock_and_return: + mutex_unlock(&zr->resource_lock); + + return res; + } + break; + + case BUZIOC_REQBUFS: + { + struct zoran_requestbuffers *breq = arg; + int res = 0; + + dprintk(3, + KERN_DEBUG + "%s: BUZIOC_REQBUFS - count=%lu, size=%lu\n", + ZR_DEVNAME(zr), breq->count, breq->size); + + /* Enforce reasonable lower and upper limits */ + if (breq->count < 4) + breq->count = 4; /* Could be choosen smaller */ + if (breq->count > jpg_nbufs) + breq->count = jpg_nbufs; + breq->size = PAGE_ALIGN(breq->size); + if (breq->size < 8192) + breq->size = 8192; /* Arbitrary */ + /* breq->size is limited by 1 page for the stat_com + * tables to a Maximum of 2 MB */ + if (breq->size > jpg_bufsize) + breq->size = jpg_bufsize; + if (fh->jpg_buffers.need_contiguous && + breq->size > MAX_KMALLOC_MEM) + breq->size = MAX_KMALLOC_MEM; + + mutex_lock(&zr->resource_lock); + + if (fh->jpg_buffers.allocated || fh->v4l_buffers.allocated) { + dprintk(1, + KERN_ERR + "%s: BUZIOC_REQBUFS - buffers allready allocated\n", + ZR_DEVNAME(zr)); + res = -EBUSY; + goto jpgreqbuf_unlock_and_return; + } + + fh->jpg_buffers.num_buffers = breq->count; + fh->jpg_buffers.buffer_size = breq->size; + + if (jpg_fbuffer_alloc(file)) { + res = -ENOMEM; + goto jpgreqbuf_unlock_and_return; + } + + /* The next mmap will map the MJPEG buffers - could + * also be *_PLAY, but it doesn't matter here */ + fh->map_mode = ZORAN_MAP_MODE_JPG_REC; + jpgreqbuf_unlock_and_return: + mutex_unlock(&zr->resource_lock); + + return res; + } + break; + + case BUZIOC_QBUF_CAPT: + { + int *frame = arg, res; + + dprintk(3, KERN_DEBUG "%s: BUZIOC_QBUF_CAPT - frame=%d\n", + ZR_DEVNAME(zr), *frame); + + mutex_lock(&zr->resource_lock); + res = jpg_qbuf(file, *frame, BUZ_MODE_MOTION_COMPRESS); + mutex_unlock(&zr->resource_lock); + + return res; + } + break; + + case BUZIOC_QBUF_PLAY: + { + int *frame = arg, res; + + dprintk(3, KERN_DEBUG "%s: BUZIOC_QBUF_PLAY - frame=%d\n", + ZR_DEVNAME(zr), *frame); + + mutex_lock(&zr->resource_lock); + res = jpg_qbuf(file, *frame, BUZ_MODE_MOTION_DECOMPRESS); + mutex_unlock(&zr->resource_lock); + + return res; + } + break; + + case BUZIOC_SYNC: + { + struct zoran_sync *bsync = arg; + int res; + + dprintk(3, KERN_DEBUG "%s: BUZIOC_SYNC\n", ZR_DEVNAME(zr)); + + mutex_lock(&zr->resource_lock); + res = jpg_sync(file, bsync); + mutex_unlock(&zr->resource_lock); + + return res; + } + break; + + case BUZIOC_G_STATUS: + { + struct zoran_status *bstat = arg; + int norm, input, status, res = 0; + + dprintk(3, KERN_DEBUG "%s: BUZIOC_G_STATUS\n", ZR_DEVNAME(zr)); + + if (zr->codec_mode != BUZ_MODE_IDLE) { + dprintk(1, + KERN_ERR + "%s: BUZIOC_G_STATUS called but Buz in capture/playback mode\n", + ZR_DEVNAME(zr)); + return -EINVAL; + } + + input = zr->card.input[bstat->input].muxsel; + norm = VIDEO_MODE_AUTO; + + mutex_lock(&zr->resource_lock); + + if (zr->codec_mode != BUZ_MODE_IDLE) { + dprintk(1, + KERN_ERR + "%s: BUZIOC_G_STATUS called, but Buz in capture/playback mode\n", + ZR_DEVNAME(zr)); + res = -EINVAL; + goto gstat_unlock_and_return; + } + + decoder_command(zr, DECODER_SET_INPUT, &input); + decoder_command(zr, DECODER_SET_NORM, &norm); + + /* sleep 1 second */ + ssleep(1); + + /* Get status of video decoder */ + decoder_command(zr, DECODER_GET_STATUS, &status); + + /* restore previous input and norm */ + input = zr->card.input[zr->input].muxsel; + decoder_command(zr, DECODER_SET_INPUT, &input); + decoder_command(zr, DECODER_SET_NORM, &zr->norm); + gstat_unlock_and_return: + mutex_unlock(&zr->resource_lock); + + if (!res) { + bstat->signal = + (status & DECODER_STATUS_GOOD) ? 1 : 0; + if (status & DECODER_STATUS_NTSC) + bstat->norm = VIDEO_MODE_NTSC; + else if (status & DECODER_STATUS_SECAM) + bstat->norm = VIDEO_MODE_SECAM; + else + bstat->norm = VIDEO_MODE_PAL; + + bstat->color = + (status & DECODER_STATUS_COLOR) ? 1 : 0; + } + + return res; + } + break; + + /* The new video4linux2 capture interface - much nicer than video4linux1, since + * it allows for integrating the JPEG capturing calls inside standard v4l2 + */ + + case VIDIOC_QUERYCAP: + { + struct v4l2_capability *cap = arg; + + dprintk(3, KERN_DEBUG "%s: VIDIOC_QUERYCAP\n", ZR_DEVNAME(zr)); + + memset(cap, 0, sizeof(*cap)); + strncpy(cap->card, ZR_DEVNAME(zr), sizeof(cap->card)-1); + strncpy(cap->driver, "zoran", sizeof(cap->driver)-1); + snprintf(cap->bus_info, sizeof(cap->bus_info), "PCI:%s", + pci_name(zr->pci_dev)); + cap->version = + KERNEL_VERSION(MAJOR_VERSION, MINOR_VERSION, + RELEASE_VERSION); + cap->capabilities = ZORAN_V4L2_VID_FLAGS; + + return 0; + } + break; + + case VIDIOC_ENUM_FMT: + { + struct v4l2_fmtdesc *fmt = arg; + int index = fmt->index, num = -1, i, flag = 0, type = + fmt->type; + + dprintk(3, KERN_DEBUG "%s: VIDIOC_ENUM_FMT - index=%d\n", + ZR_DEVNAME(zr), fmt->index); + + switch (fmt->type) { + case V4L2_BUF_TYPE_VIDEO_CAPTURE: + flag = ZORAN_FORMAT_CAPTURE; + break; + case V4L2_BUF_TYPE_VIDEO_OUTPUT: + flag = ZORAN_FORMAT_PLAYBACK; + break; + case V4L2_BUF_TYPE_VIDEO_OVERLAY: + flag = ZORAN_FORMAT_OVERLAY; + break; + default: + dprintk(1, + KERN_ERR + "%s: VIDIOC_ENUM_FMT - unknown type %d\n", + ZR_DEVNAME(zr), fmt->type); + return -EINVAL; + } + + for (i = 0; i < NUM_FORMATS; i++) { + if (zoran_formats[i].flags & flag) + num++; + if (num == fmt->index) + break; + } + if (fmt->index < 0 /* late, but not too late */ || + i == NUM_FORMATS) + return -EINVAL; + + memset(fmt, 0, sizeof(*fmt)); + fmt->index = index; + fmt->type = type; + strncpy(fmt->description, zoran_formats[i].name, sizeof(fmt->description)-1); + fmt->pixelformat = zoran_formats[i].fourcc; + if (zoran_formats[i].flags & ZORAN_FORMAT_COMPRESSED) + fmt->flags |= V4L2_FMT_FLAG_COMPRESSED; + + return 0; + } + break; + + case VIDIOC_G_FMT: + { + struct v4l2_format *fmt = arg; + int type = fmt->type; + + dprintk(5, KERN_DEBUG "%s: VIDIOC_G_FMT\n", ZR_DEVNAME(zr)); + + memset(fmt, 0, sizeof(*fmt)); + fmt->type = type; + + switch (fmt->type) { + case V4L2_BUF_TYPE_VIDEO_OVERLAY: + + mutex_lock(&zr->resource_lock); + + fmt->fmt.win.w.left = fh->overlay_settings.x; + fmt->fmt.win.w.top = fh->overlay_settings.y; + fmt->fmt.win.w.width = fh->overlay_settings.width; + fmt->fmt.win.w.height = + fh->overlay_settings.height; + if (fh->overlay_settings.width * 2 > + BUZ_MAX_HEIGHT) + fmt->fmt.win.field = V4L2_FIELD_INTERLACED; + else + fmt->fmt.win.field = V4L2_FIELD_TOP; + + mutex_unlock(&zr->resource_lock); + + break; + + case V4L2_BUF_TYPE_VIDEO_CAPTURE: + case V4L2_BUF_TYPE_VIDEO_OUTPUT: + + mutex_lock(&zr->resource_lock); + + if (fmt->type == V4L2_BUF_TYPE_VIDEO_CAPTURE && + fh->map_mode == ZORAN_MAP_MODE_RAW) { + + fmt->fmt.pix.width = + fh->v4l_settings.width; + fmt->fmt.pix.height = + fh->v4l_settings.height; + fmt->fmt.pix.sizeimage = + fh->v4l_settings.bytesperline * + fh->v4l_settings.height; + fmt->fmt.pix.pixelformat = + fh->v4l_settings.format->fourcc; + fmt->fmt.pix.colorspace = + fh->v4l_settings.format->colorspace; + fmt->fmt.pix.bytesperline = + fh->v4l_settings.bytesperline; + if (BUZ_MAX_HEIGHT < + (fh->v4l_settings.height * 2)) + fmt->fmt.pix.field = + V4L2_FIELD_INTERLACED; + else + fmt->fmt.pix.field = + V4L2_FIELD_TOP; + + } else { + + fmt->fmt.pix.width = + fh->jpg_settings.img_width / + fh->jpg_settings.HorDcm; + fmt->fmt.pix.height = + fh->jpg_settings.img_height / + (fh->jpg_settings.VerDcm * + fh->jpg_settings.TmpDcm); + fmt->fmt.pix.sizeimage = + zoran_v4l2_calc_bufsize(&fh-> + jpg_settings); + fmt->fmt.pix.pixelformat = + V4L2_PIX_FMT_MJPEG; + if (fh->jpg_settings.TmpDcm == 1) + fmt->fmt.pix.field = + (fh->jpg_settings. + odd_even ? V4L2_FIELD_SEQ_BT : + V4L2_FIELD_SEQ_BT); + else + fmt->fmt.pix.field = + (fh->jpg_settings. + odd_even ? V4L2_FIELD_TOP : + V4L2_FIELD_BOTTOM); + + fmt->fmt.pix.bytesperline = 0; + fmt->fmt.pix.colorspace = + V4L2_COLORSPACE_SMPTE170M; + } + + mutex_unlock(&zr->resource_lock); + + break; + + default: + dprintk(1, + KERN_ERR + "%s: VIDIOC_G_FMT - unsupported type %d\n", + ZR_DEVNAME(zr), fmt->type); + return -EINVAL; + } + return 0; + } + break; + + case VIDIOC_S_FMT: + { + struct v4l2_format *fmt = arg; + int i, res = 0; + __le32 printformat; + + dprintk(3, KERN_DEBUG "%s: VIDIOC_S_FMT - type=%d, ", + ZR_DEVNAME(zr), fmt->type); + + switch (fmt->type) { + case V4L2_BUF_TYPE_VIDEO_OVERLAY: + + dprintk(3, "x=%d, y=%d, w=%d, h=%d, cnt=%d, map=0x%p\n", + fmt->fmt.win.w.left, fmt->fmt.win.w.top, + fmt->fmt.win.w.width, + fmt->fmt.win.w.height, + fmt->fmt.win.clipcount, + fmt->fmt.win.bitmap); + mutex_lock(&zr->resource_lock); + res = + setup_window(file, fmt->fmt.win.w.left, + fmt->fmt.win.w.top, + fmt->fmt.win.w.width, + fmt->fmt.win.w.height, + (struct video_clip __user *) + fmt->fmt.win.clips, + fmt->fmt.win.clipcount, + fmt->fmt.win.bitmap); + mutex_unlock(&zr->resource_lock); + return res; + break; + + case V4L2_BUF_TYPE_VIDEO_CAPTURE: + case V4L2_BUF_TYPE_VIDEO_OUTPUT: + + printformat = + __cpu_to_le32(fmt->fmt.pix.pixelformat); + dprintk(3, "size=%dx%d, fmt=0x%x (%4.4s)\n", + fmt->fmt.pix.width, fmt->fmt.pix.height, + fmt->fmt.pix.pixelformat, + (char *) &printformat); + + /* we can be requested to do JPEG/raw playback/capture */ + if (! + (fmt->type == V4L2_BUF_TYPE_VIDEO_CAPTURE || + (fmt->type == V4L2_BUF_TYPE_VIDEO_OUTPUT && + fmt->fmt.pix.pixelformat == + V4L2_PIX_FMT_MJPEG))) { + dprintk(1, + KERN_ERR + "%s: VIDIOC_S_FMT - unknown type %d/0x%x(%4.4s) combination\n", + ZR_DEVNAME(zr), fmt->type, + fmt->fmt.pix.pixelformat, + (char *) &printformat); + return -EINVAL; + } + + if (fmt->fmt.pix.pixelformat == V4L2_PIX_FMT_MJPEG) { + mutex_lock(&zr->resource_lock); + + settings = fh->jpg_settings; + + if (fh->v4l_buffers.allocated || + fh->jpg_buffers.allocated) { + dprintk(1, + KERN_ERR + "%s: VIDIOC_S_FMT - cannot change capture mode\n", + ZR_DEVNAME(zr)); + res = -EBUSY; + goto sfmtjpg_unlock_and_return; + } + + /* we actually need to set 'real' parameters now */ + if ((fmt->fmt.pix.height * 2) > + BUZ_MAX_HEIGHT) + settings.TmpDcm = 1; + else + settings.TmpDcm = 2; + settings.decimation = 0; + if (fmt->fmt.pix.height <= + fh->jpg_settings.img_height / 2) + settings.VerDcm = 2; + else + settings.VerDcm = 1; + if (fmt->fmt.pix.width <= + fh->jpg_settings.img_width / 4) + settings.HorDcm = 4; + else if (fmt->fmt.pix.width <= + fh->jpg_settings.img_width / 2) + settings.HorDcm = 2; + else + settings.HorDcm = 1; + if (settings.TmpDcm == 1) + settings.field_per_buff = 2; + else + settings.field_per_buff = 1; + + /* check */ + if ((res = + zoran_check_jpg_settings(zr, + &settings))) + goto sfmtjpg_unlock_and_return; + + /* it's ok, so set them */ + fh->jpg_settings = settings; + + /* tell the user what we actually did */ + fmt->fmt.pix.width = + settings.img_width / settings.HorDcm; + fmt->fmt.pix.height = + settings.img_height * 2 / + (settings.TmpDcm * settings.VerDcm); + if (settings.TmpDcm == 1) + fmt->fmt.pix.field = + (fh->jpg_settings. + odd_even ? V4L2_FIELD_SEQ_TB : + V4L2_FIELD_SEQ_BT); + else + fmt->fmt.pix.field = + (fh->jpg_settings. + odd_even ? V4L2_FIELD_TOP : + V4L2_FIELD_BOTTOM); + fh->jpg_buffers.buffer_size = + zoran_v4l2_calc_bufsize(&fh-> + jpg_settings); + fmt->fmt.pix.bytesperline = 0; + fmt->fmt.pix.sizeimage = + fh->jpg_buffers.buffer_size; + fmt->fmt.pix.colorspace = + V4L2_COLORSPACE_SMPTE170M; + + /* we hereby abuse this variable to show that + * we're gonna do mjpeg capture */ + fh->map_mode = + (fmt->type == + V4L2_BUF_TYPE_VIDEO_CAPTURE) ? + ZORAN_MAP_MODE_JPG_REC : + ZORAN_MAP_MODE_JPG_PLAY; + sfmtjpg_unlock_and_return: + mutex_unlock(&zr->resource_lock); + } else { + for (i = 0; i < NUM_FORMATS; i++) + if (fmt->fmt.pix.pixelformat == + zoran_formats[i].fourcc) + break; + if (i == NUM_FORMATS) { + dprintk(1, + KERN_ERR + "%s: VIDIOC_S_FMT - unknown/unsupported format 0x%x (%4.4s)\n", + ZR_DEVNAME(zr), + fmt->fmt.pix.pixelformat, + (char *) &printformat); + return -EINVAL; + } + mutex_lock(&zr->resource_lock); + if (fh->jpg_buffers.allocated || + (fh->v4l_buffers.allocated && + fh->v4l_buffers.active != + ZORAN_FREE)) { + dprintk(1, + KERN_ERR + "%s: VIDIOC_S_FMT - cannot change capture mode\n", + ZR_DEVNAME(zr)); + res = -EBUSY; + goto sfmtv4l_unlock_and_return; + } + if (fmt->fmt.pix.height > BUZ_MAX_HEIGHT) + fmt->fmt.pix.height = + BUZ_MAX_HEIGHT; + if (fmt->fmt.pix.width > BUZ_MAX_WIDTH) + fmt->fmt.pix.width = BUZ_MAX_WIDTH; + + if ((res = + zoran_v4l_set_format(file, + fmt->fmt.pix. + width, + fmt->fmt.pix. + height, + &zoran_formats + [i]))) + goto sfmtv4l_unlock_and_return; + + /* tell the user the + * results/missing stuff */ + fmt->fmt.pix.bytesperline = + fh->v4l_settings.bytesperline; + fmt->fmt.pix.sizeimage = + fh->v4l_settings.height * + fh->v4l_settings.bytesperline; + fmt->fmt.pix.colorspace = + fh->v4l_settings.format->colorspace; + if (BUZ_MAX_HEIGHT < + (fh->v4l_settings.height * 2)) + fmt->fmt.pix.field = + V4L2_FIELD_INTERLACED; + else + fmt->fmt.pix.field = + V4L2_FIELD_TOP; + + fh->map_mode = ZORAN_MAP_MODE_RAW; + sfmtv4l_unlock_and_return: + mutex_unlock(&zr->resource_lock); + } + + break; + + default: + dprintk(3, "unsupported\n"); + dprintk(1, + KERN_ERR + "%s: VIDIOC_S_FMT - unsupported type %d\n", + ZR_DEVNAME(zr), fmt->type); + return -EINVAL; + } + + return res; + } + break; + + case VIDIOC_G_FBUF: + { + struct v4l2_framebuffer *fb = arg; + + dprintk(3, KERN_DEBUG "%s: VIDIOC_G_FBUF\n", ZR_DEVNAME(zr)); + + memset(fb, 0, sizeof(*fb)); + mutex_lock(&zr->resource_lock); + fb->base = zr->buffer.base; + fb->fmt.width = zr->buffer.width; + fb->fmt.height = zr->buffer.height; + if (zr->overlay_settings.format) { + fb->fmt.pixelformat = + fh->overlay_settings.format->fourcc; + } + fb->fmt.bytesperline = zr->buffer.bytesperline; + mutex_unlock(&zr->resource_lock); + fb->fmt.colorspace = V4L2_COLORSPACE_SRGB; + fb->fmt.field = V4L2_FIELD_INTERLACED; + fb->flags = V4L2_FBUF_FLAG_OVERLAY; + fb->capability = V4L2_FBUF_CAP_LIST_CLIPPING; + + return 0; + } + break; + + case VIDIOC_S_FBUF: + { + int i, res = 0; + struct v4l2_framebuffer *fb = arg; + __le32 printformat = __cpu_to_le32(fb->fmt.pixelformat); + + dprintk(3, + KERN_DEBUG + "%s: VIDIOC_S_FBUF - base=0x%p, size=%dx%d, bpl=%d, fmt=0x%x (%4.4s)\n", + ZR_DEVNAME(zr), fb->base, fb->fmt.width, fb->fmt.height, + fb->fmt.bytesperline, fb->fmt.pixelformat, + (char *) &printformat); + + for (i = 0; i < NUM_FORMATS; i++) + if (zoran_formats[i].fourcc == fb->fmt.pixelformat) + break; + if (i == NUM_FORMATS) { + dprintk(1, + KERN_ERR + "%s: VIDIOC_S_FBUF - format=0x%x (%4.4s) not allowed\n", + ZR_DEVNAME(zr), fb->fmt.pixelformat, + (char *) &printformat); + return -EINVAL; + } + + mutex_lock(&zr->resource_lock); + res = + setup_fbuffer(file, fb->base, &zoran_formats[i], + fb->fmt.width, fb->fmt.height, + fb->fmt.bytesperline); + mutex_unlock(&zr->resource_lock); + + return res; + } + break; + + case VIDIOC_OVERLAY: + { + int *on = arg, res; + + dprintk(3, KERN_DEBUG "%s: VIDIOC_PREVIEW - on=%d\n", + ZR_DEVNAME(zr), *on); + + mutex_lock(&zr->resource_lock); + res = setup_overlay(file, *on); + mutex_unlock(&zr->resource_lock); + + return res; + } + break; + + case VIDIOC_REQBUFS: + { + struct v4l2_requestbuffers *req = arg; + int res = 0; + + dprintk(3, KERN_DEBUG "%s: VIDIOC_REQBUFS - type=%d\n", + ZR_DEVNAME(zr), req->type); + + if (req->memory != V4L2_MEMORY_MMAP) { + dprintk(1, + KERN_ERR + "%s: only MEMORY_MMAP capture is supported, not %d\n", + ZR_DEVNAME(zr), req->memory); + return -EINVAL; + } + + mutex_lock(&zr->resource_lock); + + if (fh->v4l_buffers.allocated || fh->jpg_buffers.allocated) { + dprintk(1, + KERN_ERR + "%s: VIDIOC_REQBUFS - buffers allready allocated\n", + ZR_DEVNAME(zr)); + res = -EBUSY; + goto v4l2reqbuf_unlock_and_return; + } + + if (fh->map_mode == ZORAN_MAP_MODE_RAW && + req->type == V4L2_BUF_TYPE_VIDEO_CAPTURE) { + + /* control user input */ + if (req->count < 2) + req->count = 2; + if (req->count > v4l_nbufs) + req->count = v4l_nbufs; + fh->v4l_buffers.num_buffers = req->count; + + if (v4l_fbuffer_alloc(file)) { + res = -ENOMEM; + goto v4l2reqbuf_unlock_and_return; + } + + /* The next mmap will map the V4L buffers */ + fh->map_mode = ZORAN_MAP_MODE_RAW; + + } else if (fh->map_mode == ZORAN_MAP_MODE_JPG_REC || + fh->map_mode == ZORAN_MAP_MODE_JPG_PLAY) { + + /* we need to calculate size ourselves now */ + if (req->count < 4) + req->count = 4; + if (req->count > jpg_nbufs) + req->count = jpg_nbufs; + fh->jpg_buffers.num_buffers = req->count; + fh->jpg_buffers.buffer_size = + zoran_v4l2_calc_bufsize(&fh->jpg_settings); + + if (jpg_fbuffer_alloc(file)) { + res = -ENOMEM; + goto v4l2reqbuf_unlock_and_return; + } + + /* The next mmap will map the MJPEG buffers */ + if (req->type == V4L2_BUF_TYPE_VIDEO_CAPTURE) + fh->map_mode = ZORAN_MAP_MODE_JPG_REC; + else + fh->map_mode = ZORAN_MAP_MODE_JPG_PLAY; + + } else { + dprintk(1, + KERN_ERR + "%s: VIDIOC_REQBUFS - unknown type %d\n", + ZR_DEVNAME(zr), req->type); + res = -EINVAL; + goto v4l2reqbuf_unlock_and_return; + } + v4l2reqbuf_unlock_and_return: + mutex_unlock(&zr->resource_lock); + + return 0; + } + break; + + case VIDIOC_QUERYBUF: + { + struct v4l2_buffer *buf = arg; + __u32 type = buf->type; + int index = buf->index, res; + + dprintk(3, + KERN_DEBUG + "%s: VIDIOC_QUERYBUF - index=%d, type=%d\n", + ZR_DEVNAME(zr), buf->index, buf->type); + + memset(buf, 0, sizeof(*buf)); + buf->type = type; + buf->index = index; + + mutex_lock(&zr->resource_lock); + res = zoran_v4l2_buffer_status(file, buf, buf->index); + mutex_unlock(&zr->resource_lock); + + return res; + } + break; + + case VIDIOC_QBUF: + { + struct v4l2_buffer *buf = arg; + int res = 0, codec_mode, buf_type; + + dprintk(3, + KERN_DEBUG "%s: VIDIOC_QBUF - type=%d, index=%d\n", + ZR_DEVNAME(zr), buf->type, buf->index); + + mutex_lock(&zr->resource_lock); + + switch (fh->map_mode) { + case ZORAN_MAP_MODE_RAW: + if (buf->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) { + dprintk(1, + KERN_ERR + "%s: VIDIOC_QBUF - invalid buf->type=%d for map_mode=%d\n", + ZR_DEVNAME(zr), buf->type, fh->map_mode); + res = -EINVAL; + goto qbuf_unlock_and_return; + } + + res = zoran_v4l_queue_frame(file, buf->index); + if (res) + goto qbuf_unlock_and_return; + if (!zr->v4l_memgrab_active && + fh->v4l_buffers.active == ZORAN_LOCKED) + zr36057_set_memgrab(zr, 1); + break; + + case ZORAN_MAP_MODE_JPG_REC: + case ZORAN_MAP_MODE_JPG_PLAY: + if (fh->map_mode == ZORAN_MAP_MODE_JPG_PLAY) { + buf_type = V4L2_BUF_TYPE_VIDEO_OUTPUT; + codec_mode = BUZ_MODE_MOTION_DECOMPRESS; + } else { + buf_type = V4L2_BUF_TYPE_VIDEO_CAPTURE; + codec_mode = BUZ_MODE_MOTION_COMPRESS; + } + + if (buf->type != buf_type) { + dprintk(1, + KERN_ERR + "%s: VIDIOC_QBUF - invalid buf->type=%d for map_mode=%d\n", + ZR_DEVNAME(zr), buf->type, fh->map_mode); + res = -EINVAL; + goto qbuf_unlock_and_return; + } + + res = + zoran_jpg_queue_frame(file, buf->index, + codec_mode); + if (res != 0) + goto qbuf_unlock_and_return; + if (zr->codec_mode == BUZ_MODE_IDLE && + fh->jpg_buffers.active == ZORAN_LOCKED) { + zr36057_enable_jpg(zr, codec_mode); + } + break; + + default: + dprintk(1, + KERN_ERR + "%s: VIDIOC_QBUF - unsupported type %d\n", + ZR_DEVNAME(zr), buf->type); + res = -EINVAL; + goto qbuf_unlock_and_return; + } + qbuf_unlock_and_return: + mutex_unlock(&zr->resource_lock); + + return res; + } + break; + + case VIDIOC_DQBUF: + { + struct v4l2_buffer *buf = arg; + int res = 0, buf_type, num = -1; /* compiler borks here (?) */ + + dprintk(3, KERN_DEBUG "%s: VIDIOC_DQBUF - type=%d\n", + ZR_DEVNAME(zr), buf->type); + + mutex_lock(&zr->resource_lock); + + switch (fh->map_mode) { + case ZORAN_MAP_MODE_RAW: + if (buf->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) { + dprintk(1, + KERN_ERR + "%s: VIDIOC_QBUF - invalid buf->type=%d for map_mode=%d\n", + ZR_DEVNAME(zr), buf->type, fh->map_mode); + res = -EINVAL; + goto dqbuf_unlock_and_return; + } + + num = zr->v4l_pend[zr->v4l_sync_tail & V4L_MASK_FRAME]; + if (file->f_flags & O_NONBLOCK && + zr->v4l_buffers.buffer[num].state != + BUZ_STATE_DONE) { + res = -EAGAIN; + goto dqbuf_unlock_and_return; + } + res = v4l_sync(file, num); + if (res) + goto dqbuf_unlock_and_return; + else + zr->v4l_sync_tail++; + res = zoran_v4l2_buffer_status(file, buf, num); + break; + + case ZORAN_MAP_MODE_JPG_REC: + case ZORAN_MAP_MODE_JPG_PLAY: + { + struct zoran_sync bs; + + if (fh->map_mode == ZORAN_MAP_MODE_JPG_PLAY) + buf_type = V4L2_BUF_TYPE_VIDEO_OUTPUT; + else + buf_type = V4L2_BUF_TYPE_VIDEO_CAPTURE; + + if (buf->type != buf_type) { + dprintk(1, + KERN_ERR + "%s: VIDIOC_QBUF - invalid buf->type=%d for map_mode=%d\n", + ZR_DEVNAME(zr), buf->type, fh->map_mode); + res = -EINVAL; + goto dqbuf_unlock_and_return; + } + + num = + zr->jpg_pend[zr-> + jpg_que_tail & BUZ_MASK_FRAME]; + + if (file->f_flags & O_NONBLOCK && + zr->jpg_buffers.buffer[num].state != + BUZ_STATE_DONE) { + res = -EAGAIN; + goto dqbuf_unlock_and_return; + } + res = jpg_sync(file, &bs); + if (res) + goto dqbuf_unlock_and_return; + res = + zoran_v4l2_buffer_status(file, buf, bs.frame); + break; + } + + default: + dprintk(1, + KERN_ERR + "%s: VIDIOC_DQBUF - unsupported type %d\n", + ZR_DEVNAME(zr), buf->type); + res = -EINVAL; + goto dqbuf_unlock_and_return; + } + dqbuf_unlock_and_return: + mutex_unlock(&zr->resource_lock); + + return res; + } + break; + + case VIDIOC_STREAMON: + { + int res = 0; + + dprintk(3, KERN_DEBUG "%s: VIDIOC_STREAMON\n", ZR_DEVNAME(zr)); + + mutex_lock(&zr->resource_lock); + + switch (fh->map_mode) { + case ZORAN_MAP_MODE_RAW: /* raw capture */ + if (zr->v4l_buffers.active != ZORAN_ACTIVE || + fh->v4l_buffers.active != ZORAN_ACTIVE) { + res = -EBUSY; + goto strmon_unlock_and_return; + } + + zr->v4l_buffers.active = fh->v4l_buffers.active = + ZORAN_LOCKED; + zr->v4l_settings = fh->v4l_settings; + + zr->v4l_sync_tail = zr->v4l_pend_tail; + if (!zr->v4l_memgrab_active && + zr->v4l_pend_head != zr->v4l_pend_tail) { + zr36057_set_memgrab(zr, 1); + } + break; + + case ZORAN_MAP_MODE_JPG_REC: + case ZORAN_MAP_MODE_JPG_PLAY: + /* what is the codec mode right now? */ + if (zr->jpg_buffers.active != ZORAN_ACTIVE || + fh->jpg_buffers.active != ZORAN_ACTIVE) { + res = -EBUSY; + goto strmon_unlock_and_return; + } + + zr->jpg_buffers.active = fh->jpg_buffers.active = + ZORAN_LOCKED; + + if (zr->jpg_que_head != zr->jpg_que_tail) { + /* Start the jpeg codec when the first frame is queued */ + jpeg_start(zr); + } + + break; + default: + dprintk(1, + KERN_ERR + "%s: VIDIOC_STREAMON - invalid map mode %d\n", + ZR_DEVNAME(zr), fh->map_mode); + res = -EINVAL; + goto strmon_unlock_and_return; + } + strmon_unlock_and_return: + mutex_unlock(&zr->resource_lock); + + return res; + } + break; + + case VIDIOC_STREAMOFF: + { + int i, res = 0; + + dprintk(3, KERN_DEBUG "%s: VIDIOC_STREAMOFF\n", ZR_DEVNAME(zr)); + + mutex_lock(&zr->resource_lock); + + switch (fh->map_mode) { + case ZORAN_MAP_MODE_RAW: /* raw capture */ + if (fh->v4l_buffers.active == ZORAN_FREE && + zr->v4l_buffers.active != ZORAN_FREE) { + res = -EPERM; /* stay off other's settings! */ + goto strmoff_unlock_and_return; + } + if (zr->v4l_buffers.active == ZORAN_FREE) + goto strmoff_unlock_and_return; + + /* unload capture */ + if (zr->v4l_memgrab_active) { + unsigned long flags; + + spin_lock_irqsave(&zr->spinlock, flags); + zr36057_set_memgrab(zr, 0); + spin_unlock_irqrestore(&zr->spinlock, flags); + } + + for (i = 0; i < fh->v4l_buffers.num_buffers; i++) + zr->v4l_buffers.buffer[i].state = + BUZ_STATE_USER; + fh->v4l_buffers = zr->v4l_buffers; + + zr->v4l_buffers.active = fh->v4l_buffers.active = + ZORAN_FREE; + + zr->v4l_grab_seq = 0; + zr->v4l_pend_head = zr->v4l_pend_tail = 0; + zr->v4l_sync_tail = 0; + + break; + + case ZORAN_MAP_MODE_JPG_REC: + case ZORAN_MAP_MODE_JPG_PLAY: + if (fh->jpg_buffers.active == ZORAN_FREE && + zr->jpg_buffers.active != ZORAN_FREE) { + res = -EPERM; /* stay off other's settings! */ + goto strmoff_unlock_and_return; + } + if (zr->jpg_buffers.active == ZORAN_FREE) + goto strmoff_unlock_and_return; + + res = + jpg_qbuf(file, -1, + (fh->map_mode == + ZORAN_MAP_MODE_JPG_REC) ? + BUZ_MODE_MOTION_COMPRESS : + BUZ_MODE_MOTION_DECOMPRESS); + if (res) + goto strmoff_unlock_and_return; + break; + default: + dprintk(1, + KERN_ERR + "%s: VIDIOC_STREAMOFF - invalid map mode %d\n", + ZR_DEVNAME(zr), fh->map_mode); + res = -EINVAL; + goto strmoff_unlock_and_return; + } + strmoff_unlock_and_return: + mutex_unlock(&zr->resource_lock); + + return res; + } + break; + + case VIDIOC_QUERYCTRL: + { + struct v4l2_queryctrl *ctrl = arg; + + dprintk(3, KERN_DEBUG "%s: VIDIOC_QUERYCTRL - id=%d\n", + ZR_DEVNAME(zr), ctrl->id); + + /* we only support hue/saturation/contrast/brightness */ + if (ctrl->id < V4L2_CID_BRIGHTNESS || + ctrl->id > V4L2_CID_HUE) + return -EINVAL; + else { + int id = ctrl->id; + memset(ctrl, 0, sizeof(*ctrl)); + ctrl->id = id; + } + + switch (ctrl->id) { + case V4L2_CID_BRIGHTNESS: + strncpy(ctrl->name, "Brightness", sizeof(ctrl->name)-1); + break; + case V4L2_CID_CONTRAST: + strncpy(ctrl->name, "Contrast", sizeof(ctrl->name)-1); + break; + case V4L2_CID_SATURATION: + strncpy(ctrl->name, "Saturation", sizeof(ctrl->name)-1); + break; + case V4L2_CID_HUE: + strncpy(ctrl->name, "Hue", sizeof(ctrl->name)-1); + break; + } + + ctrl->minimum = 0; + ctrl->maximum = 65535; + ctrl->step = 1; + ctrl->default_value = 32768; + ctrl->type = V4L2_CTRL_TYPE_INTEGER; + + return 0; + } + break; + + case VIDIOC_G_CTRL: + { + struct v4l2_control *ctrl = arg; + + dprintk(3, KERN_DEBUG "%s: VIDIOC_G_CTRL - id=%d\n", + ZR_DEVNAME(zr), ctrl->id); + + /* we only support hue/saturation/contrast/brightness */ + if (ctrl->id < V4L2_CID_BRIGHTNESS || + ctrl->id > V4L2_CID_HUE) + return -EINVAL; + + mutex_lock(&zr->resource_lock); + switch (ctrl->id) { + case V4L2_CID_BRIGHTNESS: + ctrl->value = zr->brightness; + break; + case V4L2_CID_CONTRAST: + ctrl->value = zr->contrast; + break; + case V4L2_CID_SATURATION: + ctrl->value = zr->saturation; + break; + case V4L2_CID_HUE: + ctrl->value = zr->hue; + break; + } + mutex_unlock(&zr->resource_lock); + + return 0; + } + break; + + case VIDIOC_S_CTRL: + { + struct v4l2_control *ctrl = arg; + struct video_picture pict; + + dprintk(3, KERN_DEBUG "%s: VIDIOC_S_CTRL - id=%d\n", + ZR_DEVNAME(zr), ctrl->id); + + /* we only support hue/saturation/contrast/brightness */ + if (ctrl->id < V4L2_CID_BRIGHTNESS || + ctrl->id > V4L2_CID_HUE) + return -EINVAL; + + if (ctrl->value < 0 || ctrl->value > 65535) { + dprintk(1, + KERN_ERR + "%s: VIDIOC_S_CTRL - invalid value %d for id=%d\n", + ZR_DEVNAME(zr), ctrl->value, ctrl->id); + return -EINVAL; + } + + mutex_lock(&zr->resource_lock); + switch (ctrl->id) { + case V4L2_CID_BRIGHTNESS: + zr->brightness = ctrl->value; + break; + case V4L2_CID_CONTRAST: + zr->contrast = ctrl->value; + break; + case V4L2_CID_SATURATION: + zr->saturation = ctrl->value; + break; + case V4L2_CID_HUE: + zr->hue = ctrl->value; + break; + } + pict.brightness = zr->brightness; + pict.contrast = zr->contrast; + pict.colour = zr->saturation; + pict.hue = zr->hue; + + decoder_command(zr, DECODER_SET_PICTURE, &pict); + + mutex_unlock(&zr->resource_lock); + + return 0; + } + break; + + case VIDIOC_ENUMSTD: + { + struct v4l2_standard *std = arg; + + dprintk(3, KERN_DEBUG "%s: VIDIOC_ENUMSTD - index=%d\n", + ZR_DEVNAME(zr), std->index); + + if (std->index < 0 || std->index >= (zr->card.norms + 1)) + return -EINVAL; + else { + int id = std->index; + memset(std, 0, sizeof(*std)); + std->index = id; + } + + if (std->index == zr->card.norms) { + /* if we have autodetect, ... */ + struct video_decoder_capability caps; + decoder_command(zr, DECODER_GET_CAPABILITIES, + &caps); + if (caps.flags & VIDEO_DECODER_AUTO) { + std->id = V4L2_STD_ALL; + strncpy(std->name, "Autodetect", sizeof(std->name)-1); + return 0; + } else + return -EINVAL; + } + switch (std->index) { + case 0: + std->id = V4L2_STD_PAL; + strncpy(std->name, "PAL", sizeof(std->name)-1); + std->frameperiod.numerator = 1; + std->frameperiod.denominator = 25; + std->framelines = zr->card.tvn[0]->Ht; + break; + case 1: + std->id = V4L2_STD_NTSC; + strncpy(std->name, "NTSC", sizeof(std->name)-1); + std->frameperiod.numerator = 1001; + std->frameperiod.denominator = 30000; + std->framelines = zr->card.tvn[1]->Ht; + break; + case 2: + std->id = V4L2_STD_SECAM; + strncpy(std->name, "SECAM", sizeof(std->name)-1); + std->frameperiod.numerator = 1; + std->frameperiod.denominator = 25; + std->framelines = zr->card.tvn[2]->Ht; + break; + } + + return 0; + } + break; + + case VIDIOC_G_STD: + { + v4l2_std_id *std = arg; + int norm; + + dprintk(3, KERN_DEBUG "%s: VIDIOC_G_STD\n", ZR_DEVNAME(zr)); + + mutex_lock(&zr->resource_lock); + norm = zr->norm; + mutex_unlock(&zr->resource_lock); + + switch (norm) { + case VIDEO_MODE_PAL: + *std = V4L2_STD_PAL; + break; + case VIDEO_MODE_NTSC: + *std = V4L2_STD_NTSC; + break; + case VIDEO_MODE_SECAM: + *std = V4L2_STD_SECAM; + break; + } + + return 0; + } + break; + + case VIDIOC_S_STD: + { + int norm = -1, res = 0; + v4l2_std_id *std = arg; + + dprintk(3, KERN_DEBUG "%s: VIDIOC_S_STD - norm=0x%llx\n", + ZR_DEVNAME(zr), (unsigned long long)*std); + + if ((*std & V4L2_STD_PAL) && !(*std & ~V4L2_STD_PAL)) + norm = VIDEO_MODE_PAL; + else if ((*std & V4L2_STD_NTSC) && !(*std & ~V4L2_STD_NTSC)) + norm = VIDEO_MODE_NTSC; + else if ((*std & V4L2_STD_SECAM) && !(*std & ~V4L2_STD_SECAM)) + norm = VIDEO_MODE_SECAM; + else if (*std == V4L2_STD_ALL) + norm = VIDEO_MODE_AUTO; + else { + dprintk(1, + KERN_ERR + "%s: VIDIOC_S_STD - invalid norm 0x%llx\n", + ZR_DEVNAME(zr), (unsigned long long)*std); + return -EINVAL; + } + + mutex_lock(&zr->resource_lock); + if ((res = zoran_set_norm(zr, norm))) + goto sstd_unlock_and_return; + + res = wait_grab_pending(zr); + sstd_unlock_and_return: + mutex_unlock(&zr->resource_lock); + return res; + } + break; + + case VIDIOC_ENUMINPUT: + { + struct v4l2_input *inp = arg; + int status; + + dprintk(3, KERN_DEBUG "%s: VIDIOC_ENUMINPUT - index=%d\n", + ZR_DEVNAME(zr), inp->index); + + if (inp->index < 0 || inp->index >= zr->card.inputs) + return -EINVAL; + else { + int id = inp->index; + memset(inp, 0, sizeof(*inp)); + inp->index = id; + } + + strncpy(inp->name, zr->card.input[inp->index].name, + sizeof(inp->name) - 1); + inp->type = V4L2_INPUT_TYPE_CAMERA; + inp->std = V4L2_STD_ALL; + + /* Get status of video decoder */ + mutex_lock(&zr->resource_lock); + decoder_command(zr, DECODER_GET_STATUS, &status); + mutex_unlock(&zr->resource_lock); + + if (!(status & DECODER_STATUS_GOOD)) { + inp->status |= V4L2_IN_ST_NO_POWER; + inp->status |= V4L2_IN_ST_NO_SIGNAL; + } + if (!(status & DECODER_STATUS_COLOR)) + inp->status |= V4L2_IN_ST_NO_COLOR; + + return 0; + } + break; + + case VIDIOC_G_INPUT: + { + int *input = arg; + + dprintk(3, KERN_DEBUG "%s: VIDIOC_G_INPUT\n", ZR_DEVNAME(zr)); + + mutex_lock(&zr->resource_lock); + *input = zr->input; + mutex_unlock(&zr->resource_lock); + + return 0; + } + break; + + case VIDIOC_S_INPUT: + { + int *input = arg, res = 0; + + dprintk(3, KERN_DEBUG "%s: VIDIOC_S_INPUT - input=%d\n", + ZR_DEVNAME(zr), *input); + + mutex_lock(&zr->resource_lock); + if ((res = zoran_set_input(zr, *input))) + goto sinput_unlock_and_return; + + /* Make sure the changes come into effect */ + res = wait_grab_pending(zr); + sinput_unlock_and_return: + mutex_unlock(&zr->resource_lock); + return res; + } + break; + + case VIDIOC_ENUMOUTPUT: + { + struct v4l2_output *outp = arg; + + dprintk(3, KERN_DEBUG "%s: VIDIOC_ENUMOUTPUT - index=%d\n", + ZR_DEVNAME(zr), outp->index); + + if (outp->index != 0) + return -EINVAL; + + memset(outp, 0, sizeof(*outp)); + outp->index = 0; + outp->type = V4L2_OUTPUT_TYPE_ANALOGVGAOVERLAY; + strncpy(outp->name, "Autodetect", sizeof(outp->name)-1); + + return 0; + } + break; + + case VIDIOC_G_OUTPUT: + { + int *output = arg; + + dprintk(3, KERN_DEBUG "%s: VIDIOC_G_OUTPUT\n", ZR_DEVNAME(zr)); + + *output = 0; + + return 0; + } + break; + + case VIDIOC_S_OUTPUT: + { + int *output = arg; + + dprintk(3, KERN_DEBUG "%s: VIDIOC_S_OUTPUT - output=%d\n", + ZR_DEVNAME(zr), *output); + + if (*output != 0) + return -EINVAL; + + return 0; + } + break; + + /* cropping (sub-frame capture) */ + case VIDIOC_CROPCAP: + { + struct v4l2_cropcap *cropcap = arg; + int type = cropcap->type, res = 0; + + dprintk(3, KERN_ERR "%s: VIDIOC_CROPCAP - type=%d\n", + ZR_DEVNAME(zr), cropcap->type); + + memset(cropcap, 0, sizeof(*cropcap)); + cropcap->type = type; + + mutex_lock(&zr->resource_lock); + + if (cropcap->type != V4L2_BUF_TYPE_VIDEO_OUTPUT && + (cropcap->type != V4L2_BUF_TYPE_VIDEO_CAPTURE || + fh->map_mode == ZORAN_MAP_MODE_RAW)) { + dprintk(1, + KERN_ERR + "%s: VIDIOC_CROPCAP - subcapture only supported for compressed capture\n", + ZR_DEVNAME(zr)); + res = -EINVAL; + goto cropcap_unlock_and_return; + } + + cropcap->bounds.top = cropcap->bounds.left = 0; + cropcap->bounds.width = BUZ_MAX_WIDTH; + cropcap->bounds.height = BUZ_MAX_HEIGHT; + cropcap->defrect.top = cropcap->defrect.left = 0; + cropcap->defrect.width = BUZ_MIN_WIDTH; + cropcap->defrect.height = BUZ_MIN_HEIGHT; + cropcap_unlock_and_return: + mutex_unlock(&zr->resource_lock); + return res; + } + break; + + case VIDIOC_G_CROP: + { + struct v4l2_crop *crop = arg; + int type = crop->type, res = 0; + + dprintk(3, KERN_ERR "%s: VIDIOC_G_CROP - type=%d\n", + ZR_DEVNAME(zr), crop->type); + + memset(crop, 0, sizeof(*crop)); + crop->type = type; + + mutex_lock(&zr->resource_lock); + + if (crop->type != V4L2_BUF_TYPE_VIDEO_OUTPUT && + (crop->type != V4L2_BUF_TYPE_VIDEO_CAPTURE || + fh->map_mode == ZORAN_MAP_MODE_RAW)) { + dprintk(1, + KERN_ERR + "%s: VIDIOC_G_CROP - subcapture only supported for compressed capture\n", + ZR_DEVNAME(zr)); + res = -EINVAL; + goto gcrop_unlock_and_return; + } + + crop->c.top = fh->jpg_settings.img_y; + crop->c.left = fh->jpg_settings.img_x; + crop->c.width = fh->jpg_settings.img_width; + crop->c.height = fh->jpg_settings.img_height; + + gcrop_unlock_and_return: + mutex_unlock(&zr->resource_lock); + + return res; + } + break; + + case VIDIOC_S_CROP: + { + struct v4l2_crop *crop = arg; + int res = 0; + + settings = fh->jpg_settings; + + dprintk(3, + KERN_ERR + "%s: VIDIOC_S_CROP - type=%d, x=%d,y=%d,w=%d,h=%d\n", + ZR_DEVNAME(zr), crop->type, crop->c.left, crop->c.top, + crop->c.width, crop->c.height); + + mutex_lock(&zr->resource_lock); + + if (fh->jpg_buffers.allocated || fh->v4l_buffers.allocated) { + dprintk(1, + KERN_ERR + "%s: VIDIOC_S_CROP - cannot change settings while active\n", + ZR_DEVNAME(zr)); + res = -EBUSY; + goto scrop_unlock_and_return; + } + + if (crop->type != V4L2_BUF_TYPE_VIDEO_OUTPUT && + (crop->type != V4L2_BUF_TYPE_VIDEO_CAPTURE || + fh->map_mode == ZORAN_MAP_MODE_RAW)) { + dprintk(1, + KERN_ERR + "%s: VIDIOC_G_CROP - subcapture only supported for compressed capture\n", + ZR_DEVNAME(zr)); + res = -EINVAL; + goto scrop_unlock_and_return; + } + + /* move into a form that we understand */ + settings.img_x = crop->c.left; + settings.img_y = crop->c.top; + settings.img_width = crop->c.width; + settings.img_height = crop->c.height; + + /* check validity */ + if ((res = zoran_check_jpg_settings(zr, &settings))) + goto scrop_unlock_and_return; + + /* accept */ + fh->jpg_settings = settings; + + scrop_unlock_and_return: + mutex_unlock(&zr->resource_lock); + return res; + } + break; + + case VIDIOC_G_JPEGCOMP: + { + struct v4l2_jpegcompression *params = arg; + + dprintk(3, KERN_DEBUG "%s: VIDIOC_G_JPEGCOMP\n", + ZR_DEVNAME(zr)); + + memset(params, 0, sizeof(*params)); + + mutex_lock(&zr->resource_lock); + + params->quality = fh->jpg_settings.jpg_comp.quality; + params->APPn = fh->jpg_settings.jpg_comp.APPn; + memcpy(params->APP_data, + fh->jpg_settings.jpg_comp.APP_data, + fh->jpg_settings.jpg_comp.APP_len); + params->APP_len = fh->jpg_settings.jpg_comp.APP_len; + memcpy(params->COM_data, + fh->jpg_settings.jpg_comp.COM_data, + fh->jpg_settings.jpg_comp.COM_len); + params->COM_len = fh->jpg_settings.jpg_comp.COM_len; + params->jpeg_markers = + fh->jpg_settings.jpg_comp.jpeg_markers; + + mutex_unlock(&zr->resource_lock); + + return 0; + } + break; + + case VIDIOC_S_JPEGCOMP: + { + struct v4l2_jpegcompression *params = arg; + int res = 0; + + settings = fh->jpg_settings; + + dprintk(3, + KERN_DEBUG + "%s: VIDIOC_S_JPEGCOMP - quality=%d, APPN=%d, APP_len=%d, COM_len=%d\n", + ZR_DEVNAME(zr), params->quality, params->APPn, + params->APP_len, params->COM_len); + + settings.jpg_comp = *params; + + mutex_lock(&zr->resource_lock); + + if (fh->v4l_buffers.active != ZORAN_FREE || + fh->jpg_buffers.active != ZORAN_FREE) { + dprintk(1, + KERN_WARNING + "%s: VIDIOC_S_JPEGCOMP called while in playback/capture mode\n", + ZR_DEVNAME(zr)); + res = -EBUSY; + goto sjpegc_unlock_and_return; + } + + if ((res = zoran_check_jpg_settings(zr, &settings))) + goto sjpegc_unlock_and_return; + if (!fh->jpg_buffers.allocated) + fh->jpg_buffers.buffer_size = + zoran_v4l2_calc_bufsize(&fh->jpg_settings); + fh->jpg_settings.jpg_comp = *params = settings.jpg_comp; + sjpegc_unlock_and_return: + mutex_unlock(&zr->resource_lock); + + return 0; + } + break; + + case VIDIOC_QUERYSTD: /* why is this useful? */ + { + v4l2_std_id *std = arg; + + dprintk(3, + KERN_DEBUG "%s: VIDIOC_QUERY_STD - std=0x%llx\n", + ZR_DEVNAME(zr), (unsigned long long)*std); + + if (*std == V4L2_STD_ALL || *std == V4L2_STD_NTSC || + *std == V4L2_STD_PAL || (*std == V4L2_STD_SECAM && + zr->card.norms == 3)) { + return 0; + } + + return -EINVAL; + } + break; + + case VIDIOC_TRY_FMT: + { + struct v4l2_format *fmt = arg; + int res = 0; + + dprintk(3, KERN_DEBUG "%s: VIDIOC_TRY_FMT - type=%d\n", + ZR_DEVNAME(zr), fmt->type); + + switch (fmt->type) { + case V4L2_BUF_TYPE_VIDEO_OVERLAY: + mutex_lock(&zr->resource_lock); + + if (fmt->fmt.win.w.width > BUZ_MAX_WIDTH) + fmt->fmt.win.w.width = BUZ_MAX_WIDTH; + if (fmt->fmt.win.w.width < BUZ_MIN_WIDTH) + fmt->fmt.win.w.width = BUZ_MIN_WIDTH; + if (fmt->fmt.win.w.height > BUZ_MAX_HEIGHT) + fmt->fmt.win.w.height = BUZ_MAX_HEIGHT; + if (fmt->fmt.win.w.height < BUZ_MIN_HEIGHT) + fmt->fmt.win.w.height = BUZ_MIN_HEIGHT; + + mutex_unlock(&zr->resource_lock); + break; + + case V4L2_BUF_TYPE_VIDEO_CAPTURE: + case V4L2_BUF_TYPE_VIDEO_OUTPUT: + if (fmt->fmt.pix.bytesperline > 0) + return -EINVAL; + + mutex_lock(&zr->resource_lock); + + if (fmt->fmt.pix.pixelformat == V4L2_PIX_FMT_MJPEG) { + settings = fh->jpg_settings; + + /* we actually need to set 'real' parameters now */ + if ((fmt->fmt.pix.height * 2) > + BUZ_MAX_HEIGHT) + settings.TmpDcm = 1; + else + settings.TmpDcm = 2; + settings.decimation = 0; + if (fmt->fmt.pix.height <= + fh->jpg_settings.img_height / 2) + settings.VerDcm = 2; + else + settings.VerDcm = 1; + if (fmt->fmt.pix.width <= + fh->jpg_settings.img_width / 4) + settings.HorDcm = 4; + else if (fmt->fmt.pix.width <= + fh->jpg_settings.img_width / 2) + settings.HorDcm = 2; + else + settings.HorDcm = 1; + if (settings.TmpDcm == 1) + settings.field_per_buff = 2; + else + settings.field_per_buff = 1; + + /* check */ + if ((res = + zoran_check_jpg_settings(zr, + &settings))) + goto tryfmt_unlock_and_return; + + /* tell the user what we actually did */ + fmt->fmt.pix.width = + settings.img_width / settings.HorDcm; + fmt->fmt.pix.height = + settings.img_height * 2 / + (settings.TmpDcm * settings.VerDcm); + if (settings.TmpDcm == 1) + fmt->fmt.pix.field = + (fh->jpg_settings. + odd_even ? V4L2_FIELD_SEQ_TB : + V4L2_FIELD_SEQ_BT); + else + fmt->fmt.pix.field = + (fh->jpg_settings. + odd_even ? V4L2_FIELD_TOP : + V4L2_FIELD_BOTTOM); + + fmt->fmt.pix.sizeimage = + zoran_v4l2_calc_bufsize(&settings); + } else if (fmt->type == + V4L2_BUF_TYPE_VIDEO_CAPTURE) { + int i; + + for (i = 0; i < NUM_FORMATS; i++) + if (zoran_formats[i].fourcc == + fmt->fmt.pix.pixelformat) + break; + if (i == NUM_FORMATS) { + res = -EINVAL; + goto tryfmt_unlock_and_return; + } + + if (fmt->fmt.pix.width > BUZ_MAX_WIDTH) + fmt->fmt.pix.width = BUZ_MAX_WIDTH; + if (fmt->fmt.pix.width < BUZ_MIN_WIDTH) + fmt->fmt.pix.width = BUZ_MIN_WIDTH; + if (fmt->fmt.pix.height > BUZ_MAX_HEIGHT) + fmt->fmt.pix.height = + BUZ_MAX_HEIGHT; + if (fmt->fmt.pix.height < BUZ_MIN_HEIGHT) + fmt->fmt.pix.height = + BUZ_MIN_HEIGHT; + } else { + res = -EINVAL; + goto tryfmt_unlock_and_return; + } + tryfmt_unlock_and_return: + mutex_unlock(&zr->resource_lock); + + return res; + break; + + default: + return -EINVAL; + } + + return 0; + } + break; + + default: + dprintk(1, KERN_DEBUG "%s: UNKNOWN ioctl cmd: 0x%x\n", + ZR_DEVNAME(zr), cmd); + return -ENOIOCTLCMD; + break; + + } + return 0; +} + + +static int +zoran_ioctl (struct inode *inode, + struct file *file, + unsigned int cmd, + unsigned long arg) +{ + return video_usercopy(inode, file, cmd, arg, zoran_do_ioctl); +} + +static unsigned int +zoran_poll (struct file *file, + poll_table *wait) +{ + struct zoran_fh *fh = file->private_data; + struct zoran *zr = fh->zr; + int res = 0, frame; + unsigned long flags; + + /* we should check whether buffers are ready to be synced on + * (w/o waits - O_NONBLOCK) here + * if ready for read (sync), return POLLIN|POLLRDNORM, + * if ready for write (sync), return POLLOUT|POLLWRNORM, + * if error, return POLLERR, + * if no buffers queued or so, return POLLNVAL + */ + + mutex_lock(&zr->resource_lock); + + switch (fh->map_mode) { + case ZORAN_MAP_MODE_RAW: + poll_wait(file, &zr->v4l_capq, wait); + frame = zr->v4l_pend[zr->v4l_sync_tail & V4L_MASK_FRAME]; + + spin_lock_irqsave(&zr->spinlock, flags); + dprintk(3, + KERN_DEBUG + "%s: %s() raw - active=%c, sync_tail=%lu/%c, pend_tail=%lu, pend_head=%lu\n", + ZR_DEVNAME(zr), __func__, + "FAL"[fh->v4l_buffers.active], zr->v4l_sync_tail, + "UPMD"[zr->v4l_buffers.buffer[frame].state], + zr->v4l_pend_tail, zr->v4l_pend_head); + /* Process is the one capturing? */ + if (fh->v4l_buffers.active != ZORAN_FREE && + /* Buffer ready to DQBUF? */ + zr->v4l_buffers.buffer[frame].state == BUZ_STATE_DONE) + res = POLLIN | POLLRDNORM; + spin_unlock_irqrestore(&zr->spinlock, flags); + + break; + + case ZORAN_MAP_MODE_JPG_REC: + case ZORAN_MAP_MODE_JPG_PLAY: + poll_wait(file, &zr->jpg_capq, wait); + frame = zr->jpg_pend[zr->jpg_que_tail & BUZ_MASK_FRAME]; + + spin_lock_irqsave(&zr->spinlock, flags); + dprintk(3, + KERN_DEBUG + "%s: %s() jpg - active=%c, que_tail=%lu/%c, que_head=%lu, dma=%lu/%lu\n", + ZR_DEVNAME(zr), __func__, + "FAL"[fh->jpg_buffers.active], zr->jpg_que_tail, + "UPMD"[zr->jpg_buffers.buffer[frame].state], + zr->jpg_que_head, zr->jpg_dma_tail, zr->jpg_dma_head); + if (fh->jpg_buffers.active != ZORAN_FREE && + zr->jpg_buffers.buffer[frame].state == BUZ_STATE_DONE) { + if (fh->map_mode == ZORAN_MAP_MODE_JPG_REC) + res = POLLIN | POLLRDNORM; + else + res = POLLOUT | POLLWRNORM; + } + spin_unlock_irqrestore(&zr->spinlock, flags); + + break; + + default: + dprintk(1, + KERN_ERR + "%s: zoran_poll() - internal error, unknown map_mode=%d\n", + ZR_DEVNAME(zr), fh->map_mode); + res = POLLNVAL; + } + + mutex_unlock(&zr->resource_lock); + + return res; +} + + +/* + * This maps the buffers to user space. + * + * Depending on the state of fh->map_mode + * the V4L or the MJPEG buffers are mapped + * per buffer or all together + * + * Note that we need to connect to some + * unmap signal event to unmap the de-allocate + * the buffer accordingly (zoran_vm_close()) + */ + +static void +zoran_vm_open (struct vm_area_struct *vma) +{ + struct zoran_mapping *map = vma->vm_private_data; + + map->count++; +} + +static void +zoran_vm_close (struct vm_area_struct *vma) +{ + struct zoran_mapping *map = vma->vm_private_data; + struct file *file = map->file; + struct zoran_fh *fh = file->private_data; + struct zoran *zr = fh->zr; + int i; + + map->count--; + if (map->count == 0) { + switch (fh->map_mode) { + case ZORAN_MAP_MODE_JPG_REC: + case ZORAN_MAP_MODE_JPG_PLAY: + + dprintk(3, KERN_INFO "%s: munmap(MJPEG)\n", + ZR_DEVNAME(zr)); + + for (i = 0; i < fh->jpg_buffers.num_buffers; i++) { + if (fh->jpg_buffers.buffer[i].map == map) { + fh->jpg_buffers.buffer[i].map = + NULL; + } + } + kfree(map); + + for (i = 0; i < fh->jpg_buffers.num_buffers; i++) + if (fh->jpg_buffers.buffer[i].map) + break; + if (i == fh->jpg_buffers.num_buffers) { + mutex_lock(&zr->resource_lock); + + if (fh->jpg_buffers.active != ZORAN_FREE) { + jpg_qbuf(file, -1, zr->codec_mode); + zr->jpg_buffers.allocated = 0; + zr->jpg_buffers.active = + fh->jpg_buffers.active = + ZORAN_FREE; + } + //jpg_fbuffer_free(file); + fh->jpg_buffers.allocated = 0; + fh->jpg_buffers.ready_to_be_freed = 1; + + mutex_unlock(&zr->resource_lock); + } + + break; + + case ZORAN_MAP_MODE_RAW: + + dprintk(3, KERN_INFO "%s: munmap(V4L)\n", + ZR_DEVNAME(zr)); + + for (i = 0; i < fh->v4l_buffers.num_buffers; i++) { + if (fh->v4l_buffers.buffer[i].map == map) { + /* unqueue/unmap */ + fh->v4l_buffers.buffer[i].map = + NULL; + } + } + kfree(map); + + for (i = 0; i < fh->v4l_buffers.num_buffers; i++) + if (fh->v4l_buffers.buffer[i].map) + break; + if (i == fh->v4l_buffers.num_buffers) { + mutex_lock(&zr->resource_lock); + + if (fh->v4l_buffers.active != ZORAN_FREE) { + unsigned long flags; + + spin_lock_irqsave(&zr->spinlock, flags); + zr36057_set_memgrab(zr, 0); + zr->v4l_buffers.allocated = 0; + zr->v4l_buffers.active = + fh->v4l_buffers.active = + ZORAN_FREE; + spin_unlock_irqrestore(&zr->spinlock, flags); + } + //v4l_fbuffer_free(file); + fh->v4l_buffers.allocated = 0; + fh->v4l_buffers.ready_to_be_freed = 1; + + mutex_unlock(&zr->resource_lock); + } + + break; + + default: + printk(KERN_ERR + "%s: munmap() - internal error - unknown map mode %d\n", + ZR_DEVNAME(zr), fh->map_mode); + break; + + } + } +} + +static struct vm_operations_struct zoran_vm_ops = { + .open = zoran_vm_open, + .close = zoran_vm_close, +}; + +static int +zoran_mmap (struct file *file, + struct vm_area_struct *vma) +{ + struct zoran_fh *fh = file->private_data; + struct zoran *zr = fh->zr; + unsigned long size = (vma->vm_end - vma->vm_start); + unsigned long offset = vma->vm_pgoff << PAGE_SHIFT; + int i, j; + unsigned long page, start = vma->vm_start, todo, pos, fraglen; + int first, last; + struct zoran_mapping *map; + int res = 0; + + dprintk(3, + KERN_INFO "%s: mmap(%s) of 0x%08lx-0x%08lx (size=%lu)\n", + ZR_DEVNAME(zr), + fh->map_mode == ZORAN_MAP_MODE_RAW ? "V4L" : "MJPEG", + vma->vm_start, vma->vm_end, size); + + if (!(vma->vm_flags & VM_SHARED) || !(vma->vm_flags & VM_READ) || + !(vma->vm_flags & VM_WRITE)) { + dprintk(1, + KERN_ERR + "%s: mmap() - no MAP_SHARED/PROT_{READ,WRITE} given\n", + ZR_DEVNAME(zr)); + return -EINVAL; + } + + switch (fh->map_mode) { + + case ZORAN_MAP_MODE_JPG_REC: + case ZORAN_MAP_MODE_JPG_PLAY: + + /* lock */ + mutex_lock(&zr->resource_lock); + + /* Map the MJPEG buffers */ + if (!fh->jpg_buffers.allocated) { + dprintk(1, + KERN_ERR + "%s: zoran_mmap(MJPEG) - buffers not yet allocated\n", + ZR_DEVNAME(zr)); + res = -ENOMEM; + goto jpg_mmap_unlock_and_return; + } + + first = offset / fh->jpg_buffers.buffer_size; + last = first - 1 + size / fh->jpg_buffers.buffer_size; + if (offset % fh->jpg_buffers.buffer_size != 0 || + size % fh->jpg_buffers.buffer_size != 0 || first < 0 || + last < 0 || first >= fh->jpg_buffers.num_buffers || + last >= fh->jpg_buffers.num_buffers) { + dprintk(1, + KERN_ERR + "%s: mmap(MJPEG) - offset=%lu or size=%lu invalid for bufsize=%d and numbufs=%d\n", + ZR_DEVNAME(zr), offset, size, + fh->jpg_buffers.buffer_size, + fh->jpg_buffers.num_buffers); + res = -EINVAL; + goto jpg_mmap_unlock_and_return; + } + for (i = first; i <= last; i++) { + if (fh->jpg_buffers.buffer[i].map) { + dprintk(1, + KERN_ERR + "%s: mmap(MJPEG) - buffer %d already mapped\n", + ZR_DEVNAME(zr), i); + res = -EBUSY; + goto jpg_mmap_unlock_and_return; + } + } + + /* map these buffers (v4l_buffers[i]) */ + map = kmalloc(sizeof(struct zoran_mapping), GFP_KERNEL); + if (!map) { + res = -ENOMEM; + goto jpg_mmap_unlock_and_return; + } + map->file = file; + map->count = 1; + + vma->vm_ops = &zoran_vm_ops; + vma->vm_flags |= VM_DONTEXPAND; + vma->vm_private_data = map; + + for (i = first; i <= last; i++) { + for (j = 0; + j < fh->jpg_buffers.buffer_size / PAGE_SIZE; + j++) { + fraglen = + (le32_to_cpu(fh->jpg_buffers.buffer[i]. + frag_tab[2 * j + 1]) & ~1) << 1; + todo = size; + if (todo > fraglen) + todo = fraglen; + pos = + le32_to_cpu(fh->jpg_buffers. + buffer[i].frag_tab[2 * j]); + /* should just be pos on i386 */ + page = virt_to_phys(bus_to_virt(pos)) + >> PAGE_SHIFT; + if (remap_pfn_range(vma, start, page, + todo, PAGE_SHARED)) { + dprintk(1, + KERN_ERR + "%s: zoran_mmap(V4L) - remap_pfn_range failed\n", + ZR_DEVNAME(zr)); + res = -EAGAIN; + goto jpg_mmap_unlock_and_return; + } + size -= todo; + start += todo; + if (size == 0) + break; + if (le32_to_cpu(fh->jpg_buffers.buffer[i]. + frag_tab[2 * j + 1]) & 1) + break; /* was last fragment */ + } + fh->jpg_buffers.buffer[i].map = map; + if (size == 0) + break; + + } + jpg_mmap_unlock_and_return: + mutex_unlock(&zr->resource_lock); + + break; + + case ZORAN_MAP_MODE_RAW: + + mutex_lock(&zr->resource_lock); + + /* Map the V4L buffers */ + if (!fh->v4l_buffers.allocated) { + dprintk(1, + KERN_ERR + "%s: zoran_mmap(V4L) - buffers not yet allocated\n", + ZR_DEVNAME(zr)); + res = -ENOMEM; + goto v4l_mmap_unlock_and_return; + } + + first = offset / fh->v4l_buffers.buffer_size; + last = first - 1 + size / fh->v4l_buffers.buffer_size; + if (offset % fh->v4l_buffers.buffer_size != 0 || + size % fh->v4l_buffers.buffer_size != 0 || first < 0 || + last < 0 || first >= fh->v4l_buffers.num_buffers || + last >= fh->v4l_buffers.buffer_size) { + dprintk(1, + KERN_ERR + "%s: mmap(V4L) - offset=%lu or size=%lu invalid for bufsize=%d and numbufs=%d\n", + ZR_DEVNAME(zr), offset, size, + fh->v4l_buffers.buffer_size, + fh->v4l_buffers.num_buffers); + res = -EINVAL; + goto v4l_mmap_unlock_and_return; + } + for (i = first; i <= last; i++) { + if (fh->v4l_buffers.buffer[i].map) { + dprintk(1, + KERN_ERR + "%s: mmap(V4L) - buffer %d already mapped\n", + ZR_DEVNAME(zr), i); + res = -EBUSY; + goto v4l_mmap_unlock_and_return; + } + } + + /* map these buffers (v4l_buffers[i]) */ + map = kmalloc(sizeof(struct zoran_mapping), GFP_KERNEL); + if (!map) { + res = -ENOMEM; + goto v4l_mmap_unlock_and_return; + } + map->file = file; + map->count = 1; + + vma->vm_ops = &zoran_vm_ops; + vma->vm_flags |= VM_DONTEXPAND; + vma->vm_private_data = map; + + for (i = first; i <= last; i++) { + todo = size; + if (todo > fh->v4l_buffers.buffer_size) + todo = fh->v4l_buffers.buffer_size; + page = fh->v4l_buffers.buffer[i].fbuffer_phys; + if (remap_pfn_range(vma, start, page >> PAGE_SHIFT, + todo, PAGE_SHARED)) { + dprintk(1, + KERN_ERR + "%s: zoran_mmap(V4L)i - remap_pfn_range failed\n", + ZR_DEVNAME(zr)); + res = -EAGAIN; + goto v4l_mmap_unlock_and_return; + } + size -= todo; + start += todo; + fh->v4l_buffers.buffer[i].map = map; + if (size == 0) + break; + } + v4l_mmap_unlock_and_return: + mutex_unlock(&zr->resource_lock); + + break; + + default: + dprintk(1, + KERN_ERR + "%s: zoran_mmap() - internal error - unknown map mode %d\n", + ZR_DEVNAME(zr), fh->map_mode); + break; + } + + return 0; +} + +static const struct file_operations zoran_fops = { + .owner = THIS_MODULE, + .open = zoran_open, + .release = zoran_close, + .ioctl = zoran_ioctl, +#ifdef CONFIG_COMPAT + .compat_ioctl = v4l_compat_ioctl32, +#endif + .llseek = no_llseek, + .read = zoran_read, + .write = zoran_write, + .mmap = zoran_mmap, + .poll = zoran_poll, +}; + +struct video_device zoran_template __devinitdata = { + .name = ZORAN_NAME, + .fops = &zoran_fops, + .release = &zoran_vdev_release, + .minor = -1 +}; + diff --git a/drivers/media/video/zoran/zoran_procfs.c b/drivers/media/video/zoran/zoran_procfs.c new file mode 100644 index 0000000..870bc5a --- /dev/null +++ b/drivers/media/video/zoran/zoran_procfs.c @@ -0,0 +1,225 @@ +/* + * Zoran zr36057/zr36067 PCI controller driver, for the + * Pinnacle/Miro DC10/DC10+/DC30/DC30+, Iomega Buz, Linux + * Media Labs LML33/LML33R10. + * + * This part handles the procFS entries (/proc/ZORAN[%d]) + * + * Copyright (C) 2000 Serguei Miridonov + * + * Currently maintained by: + * Ronald Bultje + * Laurent Pinchart + * Mailinglist + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +#include "videocodec.h" +#include "zoran.h" +#include "zoran_procfs.h" +#include "zoran_card.h" + +#ifdef CONFIG_PROC_FS +struct procfs_params_zr36067 { + char *name; + short reg; + u32 mask; + short bit; +}; + +static const struct procfs_params_zr36067 zr67[] = { + {"HSPol", 0x000, 1, 30}, + {"HStart", 0x000, 0x3ff, 10}, + {"HEnd", 0x000, 0x3ff, 0}, + + {"VSPol", 0x004, 1, 30}, + {"VStart", 0x004, 0x3ff, 10}, + {"VEnd", 0x004, 0x3ff, 0}, + + {"ExtFl", 0x008, 1, 26}, + {"TopField", 0x008, 1, 25}, + {"VCLKPol", 0x008, 1, 24}, + {"DupFld", 0x008, 1, 20}, + {"LittleEndian", 0x008, 1, 0}, + + {"HsyncStart", 0x10c, 0xffff, 16}, + {"LineTot", 0x10c, 0xffff, 0}, + + {"NAX", 0x110, 0xffff, 16}, + {"PAX", 0x110, 0xffff, 0}, + + {"NAY", 0x114, 0xffff, 16}, + {"PAY", 0x114, 0xffff, 0}, + + /* {"",,,}, */ + + {NULL, 0, 0, 0}, +}; + +static void +setparam (struct zoran *zr, + char *name, + char *sval) +{ + int i = 0, reg0, reg, val; + + while (zr67[i].name != NULL) { + if (!strncmp(name, zr67[i].name, strlen(zr67[i].name))) { + reg = reg0 = btread(zr67[i].reg); + reg &= ~(zr67[i].mask << zr67[i].bit); + if (!isdigit(sval[0])) + break; + val = simple_strtoul(sval, NULL, 0); + if ((val & ~zr67[i].mask)) + break; + reg |= (val & zr67[i].mask) << zr67[i].bit; + dprintk(4, + KERN_INFO + "%s: setparam: setting ZR36067 register 0x%03x: 0x%08x=>0x%08x %s=%d\n", + ZR_DEVNAME(zr), zr67[i].reg, reg0, reg, + zr67[i].name, val); + btwrite(reg, zr67[i].reg); + break; + } + i++; + } +} + +static int zoran_show(struct seq_file *p, void *v) +{ + struct zoran *zr = p->private; + int i; + + seq_printf(p, "ZR36067 registers:\n"); + for (i = 0; i < 0x130; i += 16) + seq_printf(p, "%03X %08X %08X %08X %08X \n", i, + btread(i), btread(i+4), btread(i+8), btread(i+12)); + return 0; +} + +static int zoran_open(struct inode *inode, struct file *file) +{ + struct zoran *data = PDE(inode)->data; + return single_open(file, zoran_show, data); +} + +static ssize_t zoran_write(struct file *file, const char __user *buffer, + size_t count, loff_t *ppos) +{ + struct zoran *zr = PDE(file->f_path.dentry->d_inode)->data; + char *string, *sp; + char *line, *ldelim, *varname, *svar, *tdelim; + + if (count > 32768) /* Stupidity filter */ + return -EINVAL; + + string = sp = vmalloc(count + 1); + if (!string) { + dprintk(1, + KERN_ERR + "%s: write_proc: can not allocate memory\n", + ZR_DEVNAME(zr)); + return -ENOMEM; + } + if (copy_from_user(string, buffer, count)) { + vfree (string); + return -EFAULT; + } + string[count] = 0; + dprintk(4, KERN_INFO "%s: write_proc: name=%s count=%zu zr=%p\n", + ZR_DEVNAME(zr), file->f_path.dentry->d_name.name, count, zr); + ldelim = " \t\n"; + tdelim = "="; + line = strpbrk(sp, ldelim); + while (line) { + *line = 0; + svar = strpbrk(sp, tdelim); + if (svar) { + *svar = 0; + varname = sp; + svar++; + setparam(zr, varname, svar); + } + sp = line + 1; + line = strpbrk(sp, ldelim); + } + vfree(string); + + return count; +} + +static const struct file_operations zoran_operations = { + .owner = THIS_MODULE, + .open = zoran_open, + .read = seq_read, + .write = zoran_write, + .llseek = seq_lseek, + .release = single_release, +}; +#endif + +int +zoran_proc_init (struct zoran *zr) +{ +#ifdef CONFIG_PROC_FS + char name[8]; + + snprintf(name, 7, "zoran%d", zr->id); + zr->zoran_proc = proc_create_data(name, 0, NULL, &zoran_operations, zr); + if (zr->zoran_proc != NULL) { + dprintk(2, + KERN_INFO + "%s: procfs entry /proc/%s allocated. data=%p\n", + ZR_DEVNAME(zr), name, zr->zoran_proc->data); + } else { + dprintk(1, KERN_ERR "%s: Unable to initialise /proc/%s\n", + ZR_DEVNAME(zr), name); + return 1; + } +#endif + return 0; +} + +void +zoran_proc_cleanup (struct zoran *zr) +{ +#ifdef CONFIG_PROC_FS + char name[8]; + + snprintf(name, 7, "zoran%d", zr->id); + if (zr->zoran_proc) + remove_proc_entry(name, NULL); + zr->zoran_proc = NULL; +#endif +} diff --git a/drivers/media/video/zoran/zoran_procfs.h b/drivers/media/video/zoran/zoran_procfs.h new file mode 100644 index 0000000..f2d5b1b --- /dev/null +++ b/drivers/media/video/zoran/zoran_procfs.h @@ -0,0 +1,36 @@ +/* + * Zoran zr36057/zr36067 PCI controller driver, for the + * Pinnacle/Miro DC10/DC10+/DC30/DC30+, Iomega Buz, Linux + * Media Labs LML33/LML33R10. + * + * This part handles card-specific data and detection + * + * Copyright (C) 2000 Serguei Miridonov + * + * Currently maintained by: + * Ronald Bultje + * Laurent Pinchart + * Mailinglist + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef __ZORAN_PROCFS_H__ +#define __ZORAN_PROCFS_H__ + +extern int zoran_proc_init(struct zoran *zr); +extern void zoran_proc_cleanup(struct zoran *zr); + +#endif /* __ZORAN_PROCFS_H__ */ diff --git a/drivers/media/video/zoran/zr36016.c b/drivers/media/video/zoran/zr36016.c new file mode 100644 index 0000000..00d132b --- /dev/null +++ b/drivers/media/video/zoran/zr36016.c @@ -0,0 +1,529 @@ +/* + * Zoran ZR36016 basic configuration functions + * + * Copyright (C) 2001 Wolfgang Scherr + * + * $Id: zr36016.c,v 1.1.2.14 2003/08/20 19:46:55 rbultje Exp $ + * + * ------------------------------------------------------------------------ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + * ------------------------------------------------------------------------ + */ + +#define ZR016_VERSION "v0.7" + +#include +#include +#include +#include + +#include +#include + +/* includes for structures and defines regarding video + #include */ + +/* I/O commands, error codes */ +#include +//#include + +/* v4l API */ +#include + +/* headerfile of this module */ +#include"zr36016.h" + +/* codec io API */ +#include"videocodec.h" + +/* it doesn't make sense to have more than 20 or so, + just to prevent some unwanted loops */ +#define MAX_CODECS 20 + +/* amount of chips attached via this driver */ +static int zr36016_codecs; + +/* debugging is available via module parameter */ +static int debug; +module_param(debug, int, 0); +MODULE_PARM_DESC(debug, "Debug level (0-4)"); + +#define dprintk(num, format, args...) \ + do { \ + if (debug >= num) \ + printk(format, ##args); \ + } while (0) + +/* ========================================================================= + Local hardware I/O functions: + + read/write via codec layer (registers are located in the master device) + ========================================================================= */ + +/* read and write functions */ +static u8 +zr36016_read (struct zr36016 *ptr, + u16 reg) +{ + u8 value = 0; + + // just in case something is wrong... + if (ptr->codec->master_data->readreg) + value = + (ptr->codec->master_data-> + readreg(ptr->codec, reg)) & 0xFF; + else + dprintk(1, + KERN_ERR "%s: invalid I/O setup, nothing read!\n", + ptr->name); + + dprintk(4, "%s: reading from 0x%04x: %02x\n", ptr->name, reg, + value); + + return value; +} + +static void +zr36016_write (struct zr36016 *ptr, + u16 reg, + u8 value) +{ + dprintk(4, "%s: writing 0x%02x to 0x%04x\n", ptr->name, value, + reg); + + // just in case something is wrong... + if (ptr->codec->master_data->writereg) { + ptr->codec->master_data->writereg(ptr->codec, reg, value); + } else + dprintk(1, + KERN_ERR + "%s: invalid I/O setup, nothing written!\n", + ptr->name); +} + +/* indirect read and write functions */ +/* the 016 supports auto-addr-increment, but + * writing it all time cost not much and is safer... */ +static u8 +zr36016_readi (struct zr36016 *ptr, + u16 reg) +{ + u8 value = 0; + + // just in case something is wrong... + if ((ptr->codec->master_data->writereg) && + (ptr->codec->master_data->readreg)) { + ptr->codec->master_data->writereg(ptr->codec, ZR016_IADDR, reg & 0x0F); // ADDR + value = (ptr->codec->master_data->readreg(ptr->codec, ZR016_IDATA)) & 0xFF; // DATA + } else + dprintk(1, + KERN_ERR + "%s: invalid I/O setup, nothing read (i)!\n", + ptr->name); + + dprintk(4, "%s: reading indirect from 0x%04x: %02x\n", ptr->name, + reg, value); + return value; +} + +static void +zr36016_writei (struct zr36016 *ptr, + u16 reg, + u8 value) +{ + dprintk(4, "%s: writing indirect 0x%02x to 0x%04x\n", ptr->name, + value, reg); + + // just in case something is wrong... + if (ptr->codec->master_data->writereg) { + ptr->codec->master_data->writereg(ptr->codec, ZR016_IADDR, reg & 0x0F); // ADDR + ptr->codec->master_data->writereg(ptr->codec, ZR016_IDATA, value & 0x0FF); // DATA + } else + dprintk(1, + KERN_ERR + "%s: invalid I/O setup, nothing written (i)!\n", + ptr->name); +} + +/* ========================================================================= + Local helper function: + + version read + ========================================================================= */ + +/* version kept in datastructure */ +static u8 +zr36016_read_version (struct zr36016 *ptr) +{ + ptr->version = zr36016_read(ptr, 0) >> 4; + return ptr->version; +} + +/* ========================================================================= + Local helper function: + + basic test of "connectivity", writes/reads to/from PAX-Lo register + ========================================================================= */ + +static int +zr36016_basic_test (struct zr36016 *ptr) +{ + if (debug) { + int i; + zr36016_writei(ptr, ZR016I_PAX_LO, 0x55); + dprintk(1, KERN_INFO "%s: registers: ", ptr->name); + for (i = 0; i <= 0x0b; i++) + dprintk(1, "%02x ", zr36016_readi(ptr, i)); + dprintk(1, "\n"); + } + // for testing just write 0, then the default value to a register and read + // it back in both cases + zr36016_writei(ptr, ZR016I_PAX_LO, 0x00); + if (zr36016_readi(ptr, ZR016I_PAX_LO) != 0x0) { + dprintk(1, + KERN_ERR + "%s: attach failed, can't connect to vfe processor!\n", + ptr->name); + return -ENXIO; + } + zr36016_writei(ptr, ZR016I_PAX_LO, 0x0d0); + if (zr36016_readi(ptr, ZR016I_PAX_LO) != 0x0d0) { + dprintk(1, + KERN_ERR + "%s: attach failed, can't connect to vfe processor!\n", + ptr->name); + return -ENXIO; + } + // we allow version numbers from 0-3, should be enough, though + zr36016_read_version(ptr); + if (ptr->version & 0x0c) { + dprintk(1, + KERN_ERR + "%s: attach failed, suspicious version %d found...\n", + ptr->name, ptr->version); + return -ENXIO; + } + + return 0; /* looks good! */ +} + +/* ========================================================================= + Local helper function: + + simple loop for pushing the init datasets - NO USE -- + ========================================================================= */ + +#if 0 +static int zr36016_pushit (struct zr36016 *ptr, + u16 startreg, + u16 len, + const char *data) +{ + int i=0; + + dprintk(4, "%s: write data block to 0x%04x (len=%d)\n", + ptr->name, startreg,len); + while (imode == CODEC_DO_COMPRESSION ? + ZR016_COMPRESSION : ZR016_EXPANSION)); + + // misc setup + zr36016_writei(ptr, ZR016I_SETUP1, + (ptr->xdec ? (ZR016_HRFL | ZR016_HORZ) : 0) | + (ptr->ydec ? ZR016_VERT : 0) | ZR016_CNTI); + zr36016_writei(ptr, ZR016I_SETUP2, ZR016_CCIR); + + // Window setup + // (no extra offset for now, norm defines offset, default width height) + zr36016_writei(ptr, ZR016I_PAX_HI, ptr->width >> 8); + zr36016_writei(ptr, ZR016I_PAX_LO, ptr->width & 0xFF); + zr36016_writei(ptr, ZR016I_PAY_HI, ptr->height >> 8); + zr36016_writei(ptr, ZR016I_PAY_LO, ptr->height & 0xFF); + zr36016_writei(ptr, ZR016I_NAX_HI, ptr->xoff >> 8); + zr36016_writei(ptr, ZR016I_NAX_LO, ptr->xoff & 0xFF); + zr36016_writei(ptr, ZR016I_NAY_HI, ptr->yoff >> 8); + zr36016_writei(ptr, ZR016I_NAY_LO, ptr->yoff & 0xFF); + + /* shall we continue now, please? */ + zr36016_write(ptr, ZR016_GOSTOP, 1); +} + +/* ========================================================================= + CODEC API FUNCTIONS + + this functions are accessed by the master via the API structure + ========================================================================= */ + +/* set compression/expansion mode and launches codec - + this should be the last call from the master before starting processing */ +static int +zr36016_set_mode (struct videocodec *codec, + int mode) +{ + struct zr36016 *ptr = (struct zr36016 *) codec->data; + + dprintk(2, "%s: set_mode %d call\n", ptr->name, mode); + + if ((mode != CODEC_DO_EXPANSION) && (mode != CODEC_DO_COMPRESSION)) + return -EINVAL; + + ptr->mode = mode; + zr36016_init(ptr); + + return 0; +} + +/* set picture size */ +static int +zr36016_set_video (struct videocodec *codec, + struct tvnorm *norm, + struct vfe_settings *cap, + struct vfe_polarity *pol) +{ + struct zr36016 *ptr = (struct zr36016 *) codec->data; + + dprintk(2, "%s: set_video %d.%d, %d/%d-%dx%d (0x%x) call\n", + ptr->name, norm->HStart, norm->VStart, + cap->x, cap->y, cap->width, cap->height, + cap->decimation); + + /* if () return -EINVAL; + * trust the master driver that it knows what it does - so + * we allow invalid startx/y for now ... */ + ptr->width = cap->width; + ptr->height = cap->height; + /* (Ronald) This is ugly. zoran_device.c, line 387 + * already mentions what happens if HStart is even + * (blue faces, etc., cr/cb inversed). There's probably + * some good reason why HStart is 0 instead of 1, so I'm + * leaving it to this for now, but really... This can be + * done a lot simpler */ + ptr->xoff = (norm->HStart ? norm->HStart : 1) + cap->x; + /* Something to note here (I don't understand it), setting + * VStart too high will cause the codec to 'not work'. I + * really don't get it. values of 16 (VStart) already break + * it here. Just '0' seems to work. More testing needed! */ + ptr->yoff = norm->VStart + cap->y; + /* (Ronald) dzjeeh, can't this thing do hor_decimation = 4? */ + ptr->xdec = ((cap->decimation & 0xff) == 1) ? 0 : 1; + ptr->ydec = (((cap->decimation >> 8) & 0xff) == 1) ? 0 : 1; + + return 0; +} + +/* additional control functions */ +static int +zr36016_control (struct videocodec *codec, + int type, + int size, + void *data) +{ + struct zr36016 *ptr = (struct zr36016 *) codec->data; + int *ival = (int *) data; + + dprintk(2, "%s: control %d call with %d byte\n", ptr->name, type, + size); + + switch (type) { + case CODEC_G_STATUS: /* get last status - we don't know it ... */ + if (size != sizeof(int)) + return -EFAULT; + *ival = 0; + break; + + case CODEC_G_CODEC_MODE: + if (size != sizeof(int)) + return -EFAULT; + *ival = 0; + break; + + case CODEC_S_CODEC_MODE: + if (size != sizeof(int)) + return -EFAULT; + if (*ival != 0) + return -EINVAL; + /* not needed, do nothing */ + return 0; + + case CODEC_G_VFE: + case CODEC_S_VFE: + return 0; + + case CODEC_S_MMAP: + /* not available, give an error */ + return -ENXIO; + + default: + return -EINVAL; + } + + return size; +} + +/* ========================================================================= + Exit and unregister function: + + Deinitializes Zoran's JPEG processor + ========================================================================= */ + +static int +zr36016_unset (struct videocodec *codec) +{ + struct zr36016 *ptr = codec->data; + + if (ptr) { + /* do wee need some codec deinit here, too ???? */ + + dprintk(1, "%s: finished codec #%d\n", ptr->name, + ptr->num); + kfree(ptr); + codec->data = NULL; + + zr36016_codecs--; + return 0; + } + + return -EFAULT; +} + +/* ========================================================================= + Setup and registry function: + + Initializes Zoran's JPEG processor + + Also sets pixel size, average code size, mode (compr./decompr.) + (the given size is determined by the processor with the video interface) + ========================================================================= */ + +static int +zr36016_setup (struct videocodec *codec) +{ + struct zr36016 *ptr; + int res; + + dprintk(2, "zr36016: initializing VFE subsystem #%d.\n", + zr36016_codecs); + + if (zr36016_codecs == MAX_CODECS) { + dprintk(1, + KERN_ERR "zr36016: Can't attach more codecs!\n"); + return -ENOSPC; + } + //mem structure init + codec->data = ptr = kzalloc(sizeof(struct zr36016), GFP_KERNEL); + if (NULL == ptr) { + dprintk(1, KERN_ERR "zr36016: Can't get enough memory!\n"); + return -ENOMEM; + } + + snprintf(ptr->name, sizeof(ptr->name), "zr36016[%d]", + zr36016_codecs); + ptr->num = zr36016_codecs++; + ptr->codec = codec; + + //testing + res = zr36016_basic_test(ptr); + if (res < 0) { + zr36016_unset(codec); + return res; + } + //final setup + ptr->mode = CODEC_DO_COMPRESSION; + ptr->width = 768; + ptr->height = 288; + ptr->xdec = 1; + ptr->ydec = 0; + zr36016_init(ptr); + + dprintk(1, KERN_INFO "%s: codec v%d attached and running\n", + ptr->name, ptr->version); + + return 0; +} + +static const struct videocodec zr36016_codec = { + .owner = THIS_MODULE, + .name = "zr36016", + .magic = 0L, // magic not used + .flags = + CODEC_FLAG_HARDWARE | CODEC_FLAG_VFE | CODEC_FLAG_ENCODER | + CODEC_FLAG_DECODER, + .type = CODEC_TYPE_ZR36016, + .setup = zr36016_setup, // functionality + .unset = zr36016_unset, + .set_mode = zr36016_set_mode, + .set_video = zr36016_set_video, + .control = zr36016_control, + // others are not used +}; + +/* ========================================================================= + HOOK IN DRIVER AS KERNEL MODULE + ========================================================================= */ + +static int __init +zr36016_init_module (void) +{ + //dprintk(1, "ZR36016 driver %s\n",ZR016_VERSION); + zr36016_codecs = 0; + return videocodec_register(&zr36016_codec); +} + +static void __exit +zr36016_cleanup_module (void) +{ + if (zr36016_codecs) { + dprintk(1, + "zr36016: something's wrong - %d codecs left somehow.\n", + zr36016_codecs); + } + videocodec_unregister(&zr36016_codec); +} + +module_init(zr36016_init_module); +module_exit(zr36016_cleanup_module); + +MODULE_AUTHOR("Wolfgang Scherr "); +MODULE_DESCRIPTION("Driver module for ZR36016 video frontends " + ZR016_VERSION); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/video/zoran/zr36016.h b/drivers/media/video/zoran/zr36016.h new file mode 100644 index 0000000..8c79229 --- /dev/null +++ b/drivers/media/video/zoran/zr36016.h @@ -0,0 +1,111 @@ +/* + * Zoran ZR36016 basic configuration functions - header file + * + * Copyright (C) 2001 Wolfgang Scherr + * + * $Id: zr36016.h,v 1.1.2.3 2003/01/14 21:18:07 rbultje Exp $ + * + * ------------------------------------------------------------------------ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + * ------------------------------------------------------------------------ + */ + +#ifndef ZR36016_H +#define ZR36016_H + +/* data stored for each zoran jpeg codec chip */ +struct zr36016 { + char name[32]; + int num; + /* io datastructure */ + struct videocodec *codec; + // coder status + __u8 version; + // actual coder setup + int mode; + + __u16 xoff; + __u16 yoff; + __u16 width; + __u16 height; + __u16 xdec; + __u16 ydec; +}; + +/* direct register addresses */ +#define ZR016_GOSTOP 0x00 +#define ZR016_MODE 0x01 +#define ZR016_IADDR 0x02 +#define ZR016_IDATA 0x03 + +/* indirect register addresses */ +#define ZR016I_SETUP1 0x00 +#define ZR016I_SETUP2 0x01 +#define ZR016I_NAX_LO 0x02 +#define ZR016I_NAX_HI 0x03 +#define ZR016I_PAX_LO 0x04 +#define ZR016I_PAX_HI 0x05 +#define ZR016I_NAY_LO 0x06 +#define ZR016I_NAY_HI 0x07 +#define ZR016I_PAY_LO 0x08 +#define ZR016I_PAY_HI 0x09 +#define ZR016I_NOL_LO 0x0a +#define ZR016I_NOL_HI 0x0b + +/* possible values for mode register */ +#define ZR016_RGB444_YUV444 0x00 +#define ZR016_RGB444_YUV422 0x01 +#define ZR016_RGB444_YUV411 0x02 +#define ZR016_RGB444_Y400 0x03 +#define ZR016_RGB444_RGB444 0x04 +#define ZR016_YUV444_YUV444 0x08 +#define ZR016_YUV444_YUV422 0x09 +#define ZR016_YUV444_YUV411 0x0a +#define ZR016_YUV444_Y400 0x0b +#define ZR016_YUV444_RGB444 0x0c +#define ZR016_YUV422_YUV422 0x11 +#define ZR016_YUV422_YUV411 0x12 +#define ZR016_YUV422_Y400 0x13 +#define ZR016_YUV411_YUV411 0x16 +#define ZR016_YUV411_Y400 0x17 +#define ZR016_4444_4444 0x19 +#define ZR016_100_100 0x1b + +#define ZR016_RGB444 0x00 +#define ZR016_YUV444 0x20 +#define ZR016_YUV422 0x40 + +#define ZR016_COMPRESSION 0x80 +#define ZR016_EXPANSION 0x80 + +/* possible values for setup 1 register */ +#define ZR016_CKRT 0x80 +#define ZR016_VERT 0x40 +#define ZR016_HORZ 0x20 +#define ZR016_HRFL 0x10 +#define ZR016_DSFL 0x08 +#define ZR016_SBFL 0x04 +#define ZR016_RSTR 0x02 +#define ZR016_CNTI 0x01 + +/* possible values for setup 2 register */ +#define ZR016_SYEN 0x40 +#define ZR016_CCIR 0x04 +#define ZR016_SIGN 0x02 +#define ZR016_YMCS 0x01 + +#endif /*fndef ZR36016_H */ diff --git a/drivers/media/video/zoran/zr36050.c b/drivers/media/video/zoran/zr36050.c new file mode 100644 index 0000000..cf8b271 --- /dev/null +++ b/drivers/media/video/zoran/zr36050.c @@ -0,0 +1,904 @@ +/* + * Zoran ZR36050 basic configuration functions + * + * Copyright (C) 2001 Wolfgang Scherr + * + * $Id: zr36050.c,v 1.1.2.11 2003/08/03 14:54:53 rbultje Exp $ + * + * ------------------------------------------------------------------------ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + * ------------------------------------------------------------------------ + */ + +#define ZR050_VERSION "v0.7.1" + +#include +#include +#include +#include + +#include +#include + +/* includes for structures and defines regarding video + #include */ + +/* I/O commands, error codes */ +#include +//#include + +/* headerfile of this module */ +#include "zr36050.h" + +/* codec io API */ +#include "videocodec.h" + +/* it doesn't make sense to have more than 20 or so, + just to prevent some unwanted loops */ +#define MAX_CODECS 20 + +/* amount of chips attached via this driver */ +static int zr36050_codecs; + +/* debugging is available via module parameter */ +static int debug; +module_param(debug, int, 0); +MODULE_PARM_DESC(debug, "Debug level (0-4)"); + +#define dprintk(num, format, args...) \ + do { \ + if (debug >= num) \ + printk(format, ##args); \ + } while (0) + +/* ========================================================================= + Local hardware I/O functions: + + read/write via codec layer (registers are located in the master device) + ========================================================================= */ + +/* read and write functions */ +static u8 +zr36050_read (struct zr36050 *ptr, + u16 reg) +{ + u8 value = 0; + + // just in case something is wrong... + if (ptr->codec->master_data->readreg) + value = (ptr->codec->master_data->readreg(ptr->codec, + reg)) & 0xFF; + else + dprintk(1, + KERN_ERR "%s: invalid I/O setup, nothing read!\n", + ptr->name); + + dprintk(4, "%s: reading from 0x%04x: %02x\n", ptr->name, reg, + value); + + return value; +} + +static void +zr36050_write (struct zr36050 *ptr, + u16 reg, + u8 value) +{ + dprintk(4, "%s: writing 0x%02x to 0x%04x\n", ptr->name, value, + reg); + + // just in case something is wrong... + if (ptr->codec->master_data->writereg) + ptr->codec->master_data->writereg(ptr->codec, reg, value); + else + dprintk(1, + KERN_ERR + "%s: invalid I/O setup, nothing written!\n", + ptr->name); +} + +/* ========================================================================= + Local helper function: + + status read + ========================================================================= */ + +/* status is kept in datastructure */ +static u8 +zr36050_read_status1 (struct zr36050 *ptr) +{ + ptr->status1 = zr36050_read(ptr, ZR050_STATUS_1); + + zr36050_read(ptr, 0); + return ptr->status1; +} + +/* ========================================================================= + Local helper function: + + scale factor read + ========================================================================= */ + +/* scale factor is kept in datastructure */ +static u16 +zr36050_read_scalefactor (struct zr36050 *ptr) +{ + ptr->scalefact = (zr36050_read(ptr, ZR050_SF_HI) << 8) | + (zr36050_read(ptr, ZR050_SF_LO) & 0xFF); + + /* leave 0 selected for an eventually GO from master */ + zr36050_read(ptr, 0); + return ptr->scalefact; +} + +/* ========================================================================= + Local helper function: + + wait if codec is ready to proceed (end of processing) or time is over + ========================================================================= */ + +static void +zr36050_wait_end (struct zr36050 *ptr) +{ + int i = 0; + + while (!(zr36050_read_status1(ptr) & 0x4)) { + udelay(1); + if (i++ > 200000) { // 200ms, there is for sure something wrong!!! + dprintk(1, + "%s: timeout at wait_end (last status: 0x%02x)\n", + ptr->name, ptr->status1); + break; + } + } +} + +/* ========================================================================= + Local helper function: + + basic test of "connectivity", writes/reads to/from memory the SOF marker + ========================================================================= */ + +static int +zr36050_basic_test (struct zr36050 *ptr) +{ + zr36050_write(ptr, ZR050_SOF_IDX, 0x00); + zr36050_write(ptr, ZR050_SOF_IDX + 1, 0x00); + if ((zr36050_read(ptr, ZR050_SOF_IDX) | + zr36050_read(ptr, ZR050_SOF_IDX + 1)) != 0x0000) { + dprintk(1, + KERN_ERR + "%s: attach failed, can't connect to jpeg processor!\n", + ptr->name); + return -ENXIO; + } + zr36050_write(ptr, ZR050_SOF_IDX, 0xff); + zr36050_write(ptr, ZR050_SOF_IDX + 1, 0xc0); + if (((zr36050_read(ptr, ZR050_SOF_IDX) << 8) | + zr36050_read(ptr, ZR050_SOF_IDX + 1)) != 0xffc0) { + dprintk(1, + KERN_ERR + "%s: attach failed, can't connect to jpeg processor!\n", + ptr->name); + return -ENXIO; + } + + zr36050_wait_end(ptr); + if ((ptr->status1 & 0x4) == 0) { + dprintk(1, + KERN_ERR + "%s: attach failed, jpeg processor failed (end flag)!\n", + ptr->name); + return -EBUSY; + } + + return 0; /* looks good! */ +} + +/* ========================================================================= + Local helper function: + + simple loop for pushing the init datasets + ========================================================================= */ + +static int +zr36050_pushit (struct zr36050 *ptr, + u16 startreg, + u16 len, + const char *data) +{ + int i = 0; + + dprintk(4, "%s: write data block to 0x%04x (len=%d)\n", ptr->name, + startreg, len); + while (i < len) { + zr36050_write(ptr, startreg++, data[i++]); + } + + return i; +} + +/* ========================================================================= + Basic datasets: + + jpeg baseline setup data (you find it on lots places in internet, or just + extract it from any regular .jpg image...) + + Could be variable, but until it's not needed it they are just fixed to save + memory. Otherwise expand zr36050 structure with arrays, push the values to + it and initalize from there, as e.g. the linux zr36057/60 driver does it. + ========================================================================= */ + +static const char zr36050_dqt[0x86] = { + 0xff, 0xdb, //Marker: DQT + 0x00, 0x84, //Length: 2*65+2 + 0x00, //Pq,Tq first table + 0x10, 0x0b, 0x0c, 0x0e, 0x0c, 0x0a, 0x10, 0x0e, + 0x0d, 0x0e, 0x12, 0x11, 0x10, 0x13, 0x18, 0x28, + 0x1a, 0x18, 0x16, 0x16, 0x18, 0x31, 0x23, 0x25, + 0x1d, 0x28, 0x3a, 0x33, 0x3d, 0x3c, 0x39, 0x33, + 0x38, 0x37, 0x40, 0x48, 0x5c, 0x4e, 0x40, 0x44, + 0x57, 0x45, 0x37, 0x38, 0x50, 0x6d, 0x51, 0x57, + 0x5f, 0x62, 0x67, 0x68, 0x67, 0x3e, 0x4d, 0x71, + 0x79, 0x70, 0x64, 0x78, 0x5c, 0x65, 0x67, 0x63, + 0x01, //Pq,Tq second table + 0x11, 0x12, 0x12, 0x18, 0x15, 0x18, 0x2f, 0x1a, + 0x1a, 0x2f, 0x63, 0x42, 0x38, 0x42, 0x63, 0x63, + 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, + 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, + 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, + 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, + 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, + 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63 +}; + +static const char zr36050_dht[0x1a4] = { + 0xff, 0xc4, //Marker: DHT + 0x01, 0xa2, //Length: 2*AC, 2*DC + 0x00, //DC first table + 0x00, 0x01, 0x05, 0x01, 0x01, 0x01, 0x01, 0x01, + 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, + 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, 0x08, 0x09, 0x0A, 0x0B, + 0x01, //DC second table + 0x00, 0x03, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, + 0x01, 0x01, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, + 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, 0x08, 0x09, 0x0A, 0x0B, + 0x10, //AC first table + 0x00, 0x02, 0x01, 0x03, 0x03, 0x02, 0x04, 0x03, + 0x05, 0x05, 0x04, 0x04, 0x00, 0x00, + 0x01, 0x7D, 0x01, 0x02, 0x03, 0x00, 0x04, 0x11, + 0x05, 0x12, 0x21, 0x31, 0x41, 0x06, 0x13, 0x51, 0x61, + 0x07, 0x22, 0x71, 0x14, 0x32, 0x81, 0x91, 0xA1, + 0x08, 0x23, 0x42, 0xB1, 0xC1, 0x15, 0x52, 0xD1, 0xF0, 0x24, + 0x33, 0x62, 0x72, 0x82, 0x09, 0x0A, 0x16, 0x17, + 0x18, 0x19, 0x1A, 0x25, 0x26, 0x27, 0x28, 0x29, 0x2A, 0x34, + 0x35, 0x36, 0x37, 0x38, 0x39, 0x3A, 0x43, 0x44, + 0x45, 0x46, 0x47, 0x48, 0x49, 0x4A, 0x53, 0x54, 0x55, 0x56, + 0x57, 0x58, 0x59, 0x5A, 0x63, 0x64, 0x65, 0x66, + 0x67, 0x68, 0x69, 0x6A, 0x73, 0x74, 0x75, 0x76, 0x77, 0x78, + 0x79, 0x7A, 0x83, 0x84, 0x85, 0x86, 0x87, 0x88, + 0x89, 0x8A, 0x92, 0x93, 0x94, 0x95, 0x96, 0x97, 0x98, 0x99, + 0x9A, 0xA2, 0xA3, 0xA4, 0xA5, 0xA6, 0xA7, 0xA8, + 0xA9, 0xAA, 0xB2, 0xB3, 0xB4, 0xB5, 0xB6, 0xB7, 0xB8, 0xB9, + 0xBA, 0xC2, 0xC3, 0xC4, 0xC5, 0xC6, 0xC7, 0xC8, + 0xC9, 0xCA, 0xD2, 0xD3, 0xD4, 0xD5, 0xD6, 0xD7, 0xD8, 0xD9, + 0xDA, 0xE1, 0xE2, 0xE3, 0xE4, 0xE5, 0xE6, 0xE7, + 0xE8, 0xE9, 0xEA, 0xF1, 0xF2, 0xF3, 0xF4, 0xF5, 0xF6, 0xF7, + 0xF8, 0xF9, 0xFA, + 0x11, //AC second table + 0x00, 0x02, 0x01, 0x02, 0x04, 0x04, 0x03, 0x04, + 0x07, 0x05, 0x04, 0x04, 0x00, 0x01, + 0x02, 0x77, 0x00, 0x01, 0x02, 0x03, 0x11, 0x04, + 0x05, 0x21, 0x31, 0x06, 0x12, 0x41, 0x51, 0x07, 0x61, 0x71, + 0x13, 0x22, 0x32, 0x81, 0x08, 0x14, 0x42, 0x91, + 0xA1, 0xB1, 0xC1, 0x09, 0x23, 0x33, 0x52, 0xF0, 0x15, 0x62, + 0x72, 0xD1, 0x0A, 0x16, 0x24, 0x34, 0xE1, 0x25, + 0xF1, 0x17, 0x18, 0x19, 0x1A, 0x26, 0x27, 0x28, 0x29, 0x2A, + 0x35, 0x36, 0x37, 0x38, 0x39, 0x3A, 0x43, 0x44, + 0x45, 0x46, 0x47, 0x48, 0x49, 0x4A, 0x53, 0x54, 0x55, 0x56, + 0x57, 0x58, 0x59, 0x5A, 0x63, 0x64, 0x65, 0x66, + 0x67, 0x68, 0x69, 0x6A, 0x73, 0x74, 0x75, 0x76, 0x77, 0x78, + 0x79, 0x7A, 0x82, 0x83, 0x84, 0x85, 0x86, 0x87, + 0x88, 0x89, 0x8A, 0x92, 0x93, 0x94, 0x95, 0x96, 0x97, 0x98, + 0x99, 0x9A, 0xA2, 0xA3, 0xA4, 0xA5, 0xA6, 0xA7, + 0xA8, 0xA9, 0xAA, 0xB2, 0xB3, 0xB4, 0xB5, 0xB6, 0xB7, 0xB8, + 0xB9, 0xBA, 0xC2, 0xC3, 0xC4, 0xC5, 0xC6, 0xC7, + 0xC8, 0xC9, 0xCA, 0xD2, 0xD3, 0xD4, 0xD5, 0xD6, 0xD7, 0xD8, + 0xD9, 0xDA, 0xE2, 0xE3, 0xE4, 0xE5, 0xE6, 0xE7, + 0xE8, 0xE9, 0xEA, 0xF2, 0xF3, 0xF4, 0xF5, 0xF6, 0xF7, 0xF8, + 0xF9, 0xFA +}; + +/* jpeg baseline setup, this is just fixed in this driver (YUV pictures) */ +#define NO_OF_COMPONENTS 0x3 //Y,U,V +#define BASELINE_PRECISION 0x8 //MCU size (?) +static const char zr36050_tq[8] = { 0, 1, 1, 0, 0, 0, 0, 0 }; //table idx's QT +static const char zr36050_td[8] = { 0, 1, 1, 0, 0, 0, 0, 0 }; //table idx's DC +static const char zr36050_ta[8] = { 0, 1, 1, 0, 0, 0, 0, 0 }; //table idx's AC + +/* horizontal 422 decimation setup (maybe we support 411 or so later, too) */ +static const char zr36050_decimation_h[8] = { 2, 1, 1, 0, 0, 0, 0, 0 }; +static const char zr36050_decimation_v[8] = { 1, 1, 1, 0, 0, 0, 0, 0 }; + +/* ========================================================================= + Local helper functions: + + calculation and setup of parameter-dependent JPEG baseline segments + (needed for compression only) + ========================================================================= */ + +/* ------------------------------------------------------------------------- */ + +/* SOF (start of frame) segment depends on width, height and sampling ratio + of each color component */ + +static int +zr36050_set_sof (struct zr36050 *ptr) +{ + char sof_data[34]; // max. size of register set + int i; + + dprintk(3, "%s: write SOF (%dx%d, %d components)\n", ptr->name, + ptr->width, ptr->height, NO_OF_COMPONENTS); + sof_data[0] = 0xff; + sof_data[1] = 0xc0; + sof_data[2] = 0x00; + sof_data[3] = (3 * NO_OF_COMPONENTS) + 8; + sof_data[4] = BASELINE_PRECISION; // only '8' possible with zr36050 + sof_data[5] = (ptr->height) >> 8; + sof_data[6] = (ptr->height) & 0xff; + sof_data[7] = (ptr->width) >> 8; + sof_data[8] = (ptr->width) & 0xff; + sof_data[9] = NO_OF_COMPONENTS; + for (i = 0; i < NO_OF_COMPONENTS; i++) { + sof_data[10 + (i * 3)] = i; // index identifier + sof_data[11 + (i * 3)] = (ptr->h_samp_ratio[i] << 4) | (ptr->v_samp_ratio[i]); // sampling ratios + sof_data[12 + (i * 3)] = zr36050_tq[i]; // Q table selection + } + return zr36050_pushit(ptr, ZR050_SOF_IDX, + (3 * NO_OF_COMPONENTS) + 10, sof_data); +} + +/* ------------------------------------------------------------------------- */ + +/* SOS (start of scan) segment depends on the used scan components + of each color component */ + +static int +zr36050_set_sos (struct zr36050 *ptr) +{ + char sos_data[16]; // max. size of register set + int i; + + dprintk(3, "%s: write SOS\n", ptr->name); + sos_data[0] = 0xff; + sos_data[1] = 0xda; + sos_data[2] = 0x00; + sos_data[3] = 2 + 1 + (2 * NO_OF_COMPONENTS) + 3; + sos_data[4] = NO_OF_COMPONENTS; + for (i = 0; i < NO_OF_COMPONENTS; i++) { + sos_data[5 + (i * 2)] = i; // index + sos_data[6 + (i * 2)] = (zr36050_td[i] << 4) | zr36050_ta[i]; // AC/DC tbl.sel. + } + sos_data[2 + 1 + (2 * NO_OF_COMPONENTS) + 2] = 00; // scan start + sos_data[2 + 1 + (2 * NO_OF_COMPONENTS) + 3] = 0x3F; + sos_data[2 + 1 + (2 * NO_OF_COMPONENTS) + 4] = 00; + return zr36050_pushit(ptr, ZR050_SOS1_IDX, + 4 + 1 + (2 * NO_OF_COMPONENTS) + 3, + sos_data); +} + +/* ------------------------------------------------------------------------- */ + +/* DRI (define restart interval) */ + +static int +zr36050_set_dri (struct zr36050 *ptr) +{ + char dri_data[6]; // max. size of register set + + dprintk(3, "%s: write DRI\n", ptr->name); + dri_data[0] = 0xff; + dri_data[1] = 0xdd; + dri_data[2] = 0x00; + dri_data[3] = 0x04; + dri_data[4] = ptr->dri >> 8; + dri_data[5] = ptr->dri & 0xff; + return zr36050_pushit(ptr, ZR050_DRI_IDX, 6, dri_data); +} + +/* ========================================================================= + Setup function: + + Setup compression/decompression of Zoran's JPEG processor + ( see also zoran 36050 manual ) + + ... sorry for the spaghetti code ... + ========================================================================= */ +static void +zr36050_init (struct zr36050 *ptr) +{ + int sum = 0; + long bitcnt, tmp; + + if (ptr->mode == CODEC_DO_COMPRESSION) { + dprintk(2, "%s: COMPRESSION SETUP\n", ptr->name); + + /* 050 communicates with 057 in master mode */ + zr36050_write(ptr, ZR050_HARDWARE, ZR050_HW_MSTR); + + /* encoding table preload for compression */ + zr36050_write(ptr, ZR050_MODE, + ZR050_MO_COMP | ZR050_MO_TLM); + zr36050_write(ptr, ZR050_OPTIONS, 0); + + /* disable all IRQs */ + zr36050_write(ptr, ZR050_INT_REQ_0, 0); + zr36050_write(ptr, ZR050_INT_REQ_1, 3); // low 2 bits always 1 + + /* volume control settings */ + /*zr36050_write(ptr, ZR050_MBCV, ptr->max_block_vol);*/ + zr36050_write(ptr, ZR050_SF_HI, ptr->scalefact >> 8); + zr36050_write(ptr, ZR050_SF_LO, ptr->scalefact & 0xff); + + zr36050_write(ptr, ZR050_AF_HI, 0xff); + zr36050_write(ptr, ZR050_AF_M, 0xff); + zr36050_write(ptr, ZR050_AF_LO, 0xff); + + /* setup the variable jpeg tables */ + sum += zr36050_set_sof(ptr); + sum += zr36050_set_sos(ptr); + sum += zr36050_set_dri(ptr); + + /* setup the fixed jpeg tables - maybe variable, though - + * (see table init section above) */ + dprintk(3, "%s: write DQT, DHT, APP\n", ptr->name); + sum += zr36050_pushit(ptr, ZR050_DQT_IDX, + sizeof(zr36050_dqt), zr36050_dqt); + sum += zr36050_pushit(ptr, ZR050_DHT_IDX, + sizeof(zr36050_dht), zr36050_dht); + zr36050_write(ptr, ZR050_APP_IDX, 0xff); + zr36050_write(ptr, ZR050_APP_IDX + 1, 0xe0 + ptr->app.appn); + zr36050_write(ptr, ZR050_APP_IDX + 2, 0x00); + zr36050_write(ptr, ZR050_APP_IDX + 3, ptr->app.len + 2); + sum += zr36050_pushit(ptr, ZR050_APP_IDX + 4, 60, + ptr->app.data) + 4; + zr36050_write(ptr, ZR050_COM_IDX, 0xff); + zr36050_write(ptr, ZR050_COM_IDX + 1, 0xfe); + zr36050_write(ptr, ZR050_COM_IDX + 2, 0x00); + zr36050_write(ptr, ZR050_COM_IDX + 3, ptr->com.len + 2); + sum += zr36050_pushit(ptr, ZR050_COM_IDX + 4, 60, + ptr->com.data) + 4; + + /* do the internal huffman table preload */ + zr36050_write(ptr, ZR050_MARKERS_EN, ZR050_ME_DHTI); + + zr36050_write(ptr, ZR050_GO, 1); // launch codec + zr36050_wait_end(ptr); + dprintk(2, "%s: Status after table preload: 0x%02x\n", + ptr->name, ptr->status1); + + if ((ptr->status1 & 0x4) == 0) { + dprintk(1, KERN_ERR "%s: init aborted!\n", + ptr->name); + return; // something is wrong, its timed out!!!! + } + + /* setup misc. data for compression (target code sizes) */ + + /* size of compressed code to reach without header data */ + sum = ptr->real_code_vol - sum; + bitcnt = sum << 3; /* need the size in bits */ + + tmp = bitcnt >> 16; + dprintk(3, + "%s: code: csize=%d, tot=%d, bit=%ld, highbits=%ld\n", + ptr->name, sum, ptr->real_code_vol, bitcnt, tmp); + zr36050_write(ptr, ZR050_TCV_NET_HI, tmp >> 8); + zr36050_write(ptr, ZR050_TCV_NET_MH, tmp & 0xff); + tmp = bitcnt & 0xffff; + zr36050_write(ptr, ZR050_TCV_NET_ML, tmp >> 8); + zr36050_write(ptr, ZR050_TCV_NET_LO, tmp & 0xff); + + bitcnt -= bitcnt >> 7; // bits without stuffing + bitcnt -= ((bitcnt * 5) >> 6); // bits without eob + + tmp = bitcnt >> 16; + dprintk(3, "%s: code: nettobit=%ld, highnettobits=%ld\n", + ptr->name, bitcnt, tmp); + zr36050_write(ptr, ZR050_TCV_DATA_HI, tmp >> 8); + zr36050_write(ptr, ZR050_TCV_DATA_MH, tmp & 0xff); + tmp = bitcnt & 0xffff; + zr36050_write(ptr, ZR050_TCV_DATA_ML, tmp >> 8); + zr36050_write(ptr, ZR050_TCV_DATA_LO, tmp & 0xff); + + /* compression setup with or without bitrate control */ + zr36050_write(ptr, ZR050_MODE, + ZR050_MO_COMP | ZR050_MO_PASS2 | + (ptr->bitrate_ctrl ? ZR050_MO_BRC : 0)); + + /* this headers seem to deliver "valid AVI" jpeg frames */ + zr36050_write(ptr, ZR050_MARKERS_EN, + ZR050_ME_DQT | ZR050_ME_DHT | + ((ptr->app.len > 0) ? ZR050_ME_APP : 0) | + ((ptr->com.len > 0) ? ZR050_ME_COM : 0)); + } else { + dprintk(2, "%s: EXPANSION SETUP\n", ptr->name); + + /* 050 communicates with 055 in master mode */ + zr36050_write(ptr, ZR050_HARDWARE, + ZR050_HW_MSTR | ZR050_HW_CFIS_2_CLK); + + /* encoding table preload */ + zr36050_write(ptr, ZR050_MODE, ZR050_MO_TLM); + + /* disable all IRQs */ + zr36050_write(ptr, ZR050_INT_REQ_0, 0); + zr36050_write(ptr, ZR050_INT_REQ_1, 3); // low 2 bits always 1 + + dprintk(3, "%s: write DHT\n", ptr->name); + zr36050_pushit(ptr, ZR050_DHT_IDX, sizeof(zr36050_dht), + zr36050_dht); + + /* do the internal huffman table preload */ + zr36050_write(ptr, ZR050_MARKERS_EN, ZR050_ME_DHTI); + + zr36050_write(ptr, ZR050_GO, 1); // launch codec + zr36050_wait_end(ptr); + dprintk(2, "%s: Status after table preload: 0x%02x\n", + ptr->name, ptr->status1); + + if ((ptr->status1 & 0x4) == 0) { + dprintk(1, KERN_ERR "%s: init aborted!\n", + ptr->name); + return; // something is wrong, its timed out!!!! + } + + /* setup misc. data for expansion */ + zr36050_write(ptr, ZR050_MODE, 0); + zr36050_write(ptr, ZR050_MARKERS_EN, 0); + } + + /* adr on selected, to allow GO from master */ + zr36050_read(ptr, 0); +} + +/* ========================================================================= + CODEC API FUNCTIONS + + this functions are accessed by the master via the API structure + ========================================================================= */ + +/* set compression/expansion mode and launches codec - + this should be the last call from the master before starting processing */ +static int +zr36050_set_mode (struct videocodec *codec, + int mode) +{ + struct zr36050 *ptr = (struct zr36050 *) codec->data; + + dprintk(2, "%s: set_mode %d call\n", ptr->name, mode); + + if ((mode != CODEC_DO_EXPANSION) && (mode != CODEC_DO_COMPRESSION)) + return -EINVAL; + + ptr->mode = mode; + zr36050_init(ptr); + + return 0; +} + +/* set picture size (norm is ignored as the codec doesn't know about it) */ +static int +zr36050_set_video (struct videocodec *codec, + struct tvnorm *norm, + struct vfe_settings *cap, + struct vfe_polarity *pol) +{ + struct zr36050 *ptr = (struct zr36050 *) codec->data; + int size; + + dprintk(2, "%s: set_video %d.%d, %d/%d-%dx%d (0x%x) q%d call\n", + ptr->name, norm->HStart, norm->VStart, + cap->x, cap->y, cap->width, cap->height, + cap->decimation, cap->quality); + /* if () return -EINVAL; + * trust the master driver that it knows what it does - so + * we allow invalid startx/y and norm for now ... */ + ptr->width = cap->width / (cap->decimation & 0xff); + ptr->height = cap->height / ((cap->decimation >> 8) & 0xff); + + /* (KM) JPEG quality */ + size = ptr->width * ptr->height; + size *= 16; /* size in bits */ + /* apply quality setting */ + size = size * cap->quality / 200; + + /* Minimum: 1kb */ + if (size < 8192) + size = 8192; + /* Maximum: 7/8 of code buffer */ + if (size > ptr->total_code_vol * 7) + size = ptr->total_code_vol * 7; + + ptr->real_code_vol = size >> 3; /* in bytes */ + + /* Set max_block_vol here (previously in zr36050_init, moved + * here for consistency with zr36060 code */ + zr36050_write(ptr, ZR050_MBCV, ptr->max_block_vol); + + return 0; +} + +/* additional control functions */ +static int +zr36050_control (struct videocodec *codec, + int type, + int size, + void *data) +{ + struct zr36050 *ptr = (struct zr36050 *) codec->data; + int *ival = (int *) data; + + dprintk(2, "%s: control %d call with %d byte\n", ptr->name, type, + size); + + switch (type) { + case CODEC_G_STATUS: /* get last status */ + if (size != sizeof(int)) + return -EFAULT; + zr36050_read_status1(ptr); + *ival = ptr->status1; + break; + + case CODEC_G_CODEC_MODE: + if (size != sizeof(int)) + return -EFAULT; + *ival = CODEC_MODE_BJPG; + break; + + case CODEC_S_CODEC_MODE: + if (size != sizeof(int)) + return -EFAULT; + if (*ival != CODEC_MODE_BJPG) + return -EINVAL; + /* not needed, do nothing */ + return 0; + + case CODEC_G_VFE: + case CODEC_S_VFE: + /* not needed, do nothing */ + return 0; + + case CODEC_S_MMAP: + /* not available, give an error */ + return -ENXIO; + + case CODEC_G_JPEG_TDS_BYTE: /* get target volume in byte */ + if (size != sizeof(int)) + return -EFAULT; + *ival = ptr->total_code_vol; + break; + + case CODEC_S_JPEG_TDS_BYTE: /* get target volume in byte */ + if (size != sizeof(int)) + return -EFAULT; + ptr->total_code_vol = *ival; + /* (Kieran Morrissey) + * code copied from zr36060.c to ensure proper bitrate */ + ptr->real_code_vol = (ptr->total_code_vol * 6) >> 3; + break; + + case CODEC_G_JPEG_SCALE: /* get scaling factor */ + if (size != sizeof(int)) + return -EFAULT; + *ival = zr36050_read_scalefactor(ptr); + break; + + case CODEC_S_JPEG_SCALE: /* set scaling factor */ + if (size != sizeof(int)) + return -EFAULT; + ptr->scalefact = *ival; + break; + + case CODEC_G_JPEG_APP_DATA: { /* get appn marker data */ + struct jpeg_app_marker *app = data; + + if (size != sizeof(struct jpeg_app_marker)) + return -EFAULT; + + *app = ptr->app; + break; + } + + case CODEC_S_JPEG_APP_DATA: { /* set appn marker data */ + struct jpeg_app_marker *app = data; + + if (size != sizeof(struct jpeg_app_marker)) + return -EFAULT; + + ptr->app = *app; + break; + } + + case CODEC_G_JPEG_COM_DATA: { /* get comment marker data */ + struct jpeg_com_marker *com = data; + + if (size != sizeof(struct jpeg_com_marker)) + return -EFAULT; + + *com = ptr->com; + break; + } + + case CODEC_S_JPEG_COM_DATA: { /* set comment marker data */ + struct jpeg_com_marker *com = data; + + if (size != sizeof(struct jpeg_com_marker)) + return -EFAULT; + + ptr->com = *com; + break; + } + + default: + return -EINVAL; + } + + return size; +} + +/* ========================================================================= + Exit and unregister function: + + Deinitializes Zoran's JPEG processor + ========================================================================= */ + +static int +zr36050_unset (struct videocodec *codec) +{ + struct zr36050 *ptr = codec->data; + + if (ptr) { + /* do wee need some codec deinit here, too ???? */ + + dprintk(1, "%s: finished codec #%d\n", ptr->name, + ptr->num); + kfree(ptr); + codec->data = NULL; + + zr36050_codecs--; + return 0; + } + + return -EFAULT; +} + +/* ========================================================================= + Setup and registry function: + + Initializes Zoran's JPEG processor + + Also sets pixel size, average code size, mode (compr./decompr.) + (the given size is determined by the processor with the video interface) + ========================================================================= */ + +static int +zr36050_setup (struct videocodec *codec) +{ + struct zr36050 *ptr; + int res; + + dprintk(2, "zr36050: initializing MJPEG subsystem #%d.\n", + zr36050_codecs); + + if (zr36050_codecs == MAX_CODECS) { + dprintk(1, + KERN_ERR "zr36050: Can't attach more codecs!\n"); + return -ENOSPC; + } + //mem structure init + codec->data = ptr = kzalloc(sizeof(struct zr36050), GFP_KERNEL); + if (NULL == ptr) { + dprintk(1, KERN_ERR "zr36050: Can't get enough memory!\n"); + return -ENOMEM; + } + + snprintf(ptr->name, sizeof(ptr->name), "zr36050[%d]", + zr36050_codecs); + ptr->num = zr36050_codecs++; + ptr->codec = codec; + + //testing + res = zr36050_basic_test(ptr); + if (res < 0) { + zr36050_unset(codec); + return res; + } + //final setup + memcpy(ptr->h_samp_ratio, zr36050_decimation_h, 8); + memcpy(ptr->v_samp_ratio, zr36050_decimation_v, 8); + + ptr->bitrate_ctrl = 0; /* 0 or 1 - fixed file size flag + * (what is the difference?) */ + ptr->mode = CODEC_DO_COMPRESSION; + ptr->width = 384; + ptr->height = 288; + ptr->total_code_vol = 16000; + ptr->max_block_vol = 240; + ptr->scalefact = 0x100; + ptr->dri = 1; + + /* no app/com marker by default */ + ptr->app.appn = 0; + ptr->app.len = 0; + ptr->com.len = 0; + + zr36050_init(ptr); + + dprintk(1, KERN_INFO "%s: codec attached and running\n", + ptr->name); + + return 0; +} + +static const struct videocodec zr36050_codec = { + .owner = THIS_MODULE, + .name = "zr36050", + .magic = 0L, // magic not used + .flags = + CODEC_FLAG_JPEG | CODEC_FLAG_HARDWARE | CODEC_FLAG_ENCODER | + CODEC_FLAG_DECODER, + .type = CODEC_TYPE_ZR36050, + .setup = zr36050_setup, // functionality + .unset = zr36050_unset, + .set_mode = zr36050_set_mode, + .set_video = zr36050_set_video, + .control = zr36050_control, + // others are not used +}; + +/* ========================================================================= + HOOK IN DRIVER AS KERNEL MODULE + ========================================================================= */ + +static int __init +zr36050_init_module (void) +{ + //dprintk(1, "ZR36050 driver %s\n",ZR050_VERSION); + zr36050_codecs = 0; + return videocodec_register(&zr36050_codec); +} + +static void __exit +zr36050_cleanup_module (void) +{ + if (zr36050_codecs) { + dprintk(1, + "zr36050: something's wrong - %d codecs left somehow.\n", + zr36050_codecs); + } + videocodec_unregister(&zr36050_codec); +} + +module_init(zr36050_init_module); +module_exit(zr36050_cleanup_module); + +MODULE_AUTHOR("Wolfgang Scherr "); +MODULE_DESCRIPTION("Driver module for ZR36050 jpeg processors " + ZR050_VERSION); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/video/zoran/zr36050.h b/drivers/media/video/zoran/zr36050.h new file mode 100644 index 0000000..9f52f0c --- /dev/null +++ b/drivers/media/video/zoran/zr36050.h @@ -0,0 +1,184 @@ +/* + * Zoran ZR36050 basic configuration functions - header file + * + * Copyright (C) 2001 Wolfgang Scherr + * + * $Id: zr36050.h,v 1.1.2.2 2003/01/14 21:18:22 rbultje Exp $ + * + * ------------------------------------------------------------------------ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + * ------------------------------------------------------------------------ + */ + +#ifndef ZR36050_H +#define ZR36050_H + +#include "videocodec.h" + +/* data stored for each zoran jpeg codec chip */ +struct zr36050 { + char name[32]; + int num; + /* io datastructure */ + struct videocodec *codec; + // last coder status + __u8 status1; + // actual coder setup + int mode; + + __u16 width; + __u16 height; + + __u16 bitrate_ctrl; + + __u32 total_code_vol; + __u32 real_code_vol; + __u16 max_block_vol; + + __u8 h_samp_ratio[8]; + __u8 v_samp_ratio[8]; + __u16 scalefact; + __u16 dri; + + /* com/app marker */ + struct jpeg_com_marker com; + struct jpeg_app_marker app; +}; + +/* zr36050 register addresses */ +#define ZR050_GO 0x000 +#define ZR050_HARDWARE 0x002 +#define ZR050_MODE 0x003 +#define ZR050_OPTIONS 0x004 +#define ZR050_MBCV 0x005 +#define ZR050_MARKERS_EN 0x006 +#define ZR050_INT_REQ_0 0x007 +#define ZR050_INT_REQ_1 0x008 +#define ZR050_TCV_NET_HI 0x009 +#define ZR050_TCV_NET_MH 0x00a +#define ZR050_TCV_NET_ML 0x00b +#define ZR050_TCV_NET_LO 0x00c +#define ZR050_TCV_DATA_HI 0x00d +#define ZR050_TCV_DATA_MH 0x00e +#define ZR050_TCV_DATA_ML 0x00f +#define ZR050_TCV_DATA_LO 0x010 +#define ZR050_SF_HI 0x011 +#define ZR050_SF_LO 0x012 +#define ZR050_AF_HI 0x013 +#define ZR050_AF_M 0x014 +#define ZR050_AF_LO 0x015 +#define ZR050_ACV_HI 0x016 +#define ZR050_ACV_MH 0x017 +#define ZR050_ACV_ML 0x018 +#define ZR050_ACV_LO 0x019 +#define ZR050_ACT_HI 0x01a +#define ZR050_ACT_MH 0x01b +#define ZR050_ACT_ML 0x01c +#define ZR050_ACT_LO 0x01d +#define ZR050_ACV_TRUN_HI 0x01e +#define ZR050_ACV_TRUN_MH 0x01f +#define ZR050_ACV_TRUN_ML 0x020 +#define ZR050_ACV_TRUN_LO 0x021 +#define ZR050_STATUS_0 0x02e +#define ZR050_STATUS_1 0x02f + +#define ZR050_SOF_IDX 0x040 +#define ZR050_SOS1_IDX 0x07a +#define ZR050_SOS2_IDX 0x08a +#define ZR050_SOS3_IDX 0x09a +#define ZR050_SOS4_IDX 0x0aa +#define ZR050_DRI_IDX 0x0c0 +#define ZR050_DNL_IDX 0x0c6 +#define ZR050_DQT_IDX 0x0cc +#define ZR050_DHT_IDX 0x1d4 +#define ZR050_APP_IDX 0x380 +#define ZR050_COM_IDX 0x3c0 + +/* zr36050 hardware register bits */ + +#define ZR050_HW_BSWD 0x80 +#define ZR050_HW_MSTR 0x40 +#define ZR050_HW_DMA 0x20 +#define ZR050_HW_CFIS_1_CLK 0x00 +#define ZR050_HW_CFIS_2_CLK 0x04 +#define ZR050_HW_CFIS_3_CLK 0x08 +#define ZR050_HW_CFIS_4_CLK 0x0C +#define ZR050_HW_CFIS_5_CLK 0x10 +#define ZR050_HW_CFIS_6_CLK 0x14 +#define ZR050_HW_CFIS_7_CLK 0x18 +#define ZR050_HW_CFIS_8_CLK 0x1C +#define ZR050_HW_BELE 0x01 + +/* zr36050 mode register bits */ + +#define ZR050_MO_COMP 0x80 +#define ZR050_MO_COMP 0x80 +#define ZR050_MO_ATP 0x40 +#define ZR050_MO_PASS2 0x20 +#define ZR050_MO_TLM 0x10 +#define ZR050_MO_DCONLY 0x08 +#define ZR050_MO_BRC 0x04 + +#define ZR050_MO_ATP 0x40 +#define ZR050_MO_PASS2 0x20 +#define ZR050_MO_TLM 0x10 +#define ZR050_MO_DCONLY 0x08 + +/* zr36050 option register bits */ + +#define ZR050_OP_NSCN_1 0x00 +#define ZR050_OP_NSCN_2 0x20 +#define ZR050_OP_NSCN_3 0x40 +#define ZR050_OP_NSCN_4 0x60 +#define ZR050_OP_NSCN_5 0x80 +#define ZR050_OP_NSCN_6 0xA0 +#define ZR050_OP_NSCN_7 0xC0 +#define ZR050_OP_NSCN_8 0xE0 +#define ZR050_OP_OVF 0x10 + + +/* zr36050 markers-enable register bits */ + +#define ZR050_ME_APP 0x80 +#define ZR050_ME_COM 0x40 +#define ZR050_ME_DRI 0x20 +#define ZR050_ME_DQT 0x10 +#define ZR050_ME_DHT 0x08 +#define ZR050_ME_DNL 0x04 +#define ZR050_ME_DQTI 0x02 +#define ZR050_ME_DHTI 0x01 + +/* zr36050 status0/1 register bit masks */ + +#define ZR050_ST_RST_MASK 0x20 +#define ZR050_ST_SOF_MASK 0x02 +#define ZR050_ST_SOS_MASK 0x02 +#define ZR050_ST_DATRDY_MASK 0x80 +#define ZR050_ST_MRKDET_MASK 0x40 +#define ZR050_ST_RFM_MASK 0x10 +#define ZR050_ST_RFD_MASK 0x08 +#define ZR050_ST_END_MASK 0x04 +#define ZR050_ST_TCVOVF_MASK 0x02 +#define ZR050_ST_DATOVF_MASK 0x01 + +/* pixel component idx */ + +#define ZR050_Y_COMPONENT 0 +#define ZR050_U_COMPONENT 1 +#define ZR050_V_COMPONENT 2 + +#endif /*fndef ZR36050_H */ diff --git a/drivers/media/video/zoran/zr36057.h b/drivers/media/video/zoran/zr36057.h new file mode 100644 index 0000000..54c9362 --- /dev/null +++ b/drivers/media/video/zoran/zr36057.h @@ -0,0 +1,168 @@ +/* + * zr36057.h - zr36057 register offsets + * + * Copyright (C) 1998 Dave Perks + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef _ZR36057_H_ +#define _ZR36057_H_ + + +/* Zoran ZR36057 registers */ + +#define ZR36057_VFEHCR 0x000 /* Video Front End, Horizontal Configuration Register */ +#define ZR36057_VFEHCR_HSPol (1<<30) +#define ZR36057_VFEHCR_HStart 10 +#define ZR36057_VFEHCR_HEnd 0 +#define ZR36057_VFEHCR_Hmask 0x3ff + +#define ZR36057_VFEVCR 0x004 /* Video Front End, Vertical Configuration Register */ +#define ZR36057_VFEVCR_VSPol (1<<30) +#define ZR36057_VFEVCR_VStart 10 +#define ZR36057_VFEVCR_VEnd 0 +#define ZR36057_VFEVCR_Vmask 0x3ff + +#define ZR36057_VFESPFR 0x008 /* Video Front End, Scaler and Pixel Format Register */ +#define ZR36057_VFESPFR_ExtFl (1<<26) +#define ZR36057_VFESPFR_TopField (1<<25) +#define ZR36057_VFESPFR_VCLKPol (1<<24) +#define ZR36057_VFESPFR_HFilter 21 +#define ZR36057_VFESPFR_HorDcm 14 +#define ZR36057_VFESPFR_VerDcm 8 +#define ZR36057_VFESPFR_DispMode 6 +#define ZR36057_VFESPFR_YUV422 (0<<3) +#define ZR36057_VFESPFR_RGB888 (1<<3) +#define ZR36057_VFESPFR_RGB565 (2<<3) +#define ZR36057_VFESPFR_RGB555 (3<<3) +#define ZR36057_VFESPFR_ErrDif (1<<2) +#define ZR36057_VFESPFR_Pack24 (1<<1) +#define ZR36057_VFESPFR_LittleEndian (1<<0) + +#define ZR36057_VDTR 0x00c /* Video Display "Top" Register */ + +#define ZR36057_VDBR 0x010 /* Video Display "Bottom" Register */ + +#define ZR36057_VSSFGR 0x014 /* Video Stride, Status, and Frame Grab Register */ +#define ZR36057_VSSFGR_DispStride 16 +#define ZR36057_VSSFGR_VidOvf (1<<8) +#define ZR36057_VSSFGR_SnapShot (1<<1) +#define ZR36057_VSSFGR_FrameGrab (1<<0) + +#define ZR36057_VDCR 0x018 /* Video Display Configuration Register */ +#define ZR36057_VDCR_VidEn (1<<31) +#define ZR36057_VDCR_MinPix 24 +#define ZR36057_VDCR_Triton (1<<24) +#define ZR36057_VDCR_VidWinHt 12 +#define ZR36057_VDCR_VidWinWid 0 + +#define ZR36057_MMTR 0x01c /* Masking Map "Top" Register */ + +#define ZR36057_MMBR 0x020 /* Masking Map "Bottom" Register */ + +#define ZR36057_OCR 0x024 /* Overlay Control Register */ +#define ZR36057_OCR_OvlEnable (1 << 15) +#define ZR36057_OCR_MaskStride 0 + +#define ZR36057_SPGPPCR 0x028 /* System, PCI, and General Purpose Pins Control Register */ +#define ZR36057_SPGPPCR_SoftReset (1<<24) + +#define ZR36057_GPPGCR1 0x02c /* General Purpose Pins and GuestBus Control Register (1) */ + +#define ZR36057_MCSAR 0x030 /* MPEG Code Source Address Register */ + +#define ZR36057_MCTCR 0x034 /* MPEG Code Transfer Control Register */ +#define ZR36057_MCTCR_CodTime (1 << 30) +#define ZR36057_MCTCR_CEmpty (1 << 29) +#define ZR36057_MCTCR_CFlush (1 << 28) +#define ZR36057_MCTCR_CodGuestID 20 +#define ZR36057_MCTCR_CodGuestReg 16 + +#define ZR36057_MCMPR 0x038 /* MPEG Code Memory Pointer Register */ + +#define ZR36057_ISR 0x03c /* Interrupt Status Register */ +#define ZR36057_ISR_GIRQ1 (1<<30) +#define ZR36057_ISR_GIRQ0 (1<<29) +#define ZR36057_ISR_CodRepIRQ (1<<28) +#define ZR36057_ISR_JPEGRepIRQ (1<<27) + +#define ZR36057_ICR 0x040 /* Interrupt Control Register */ +#define ZR36057_ICR_GIRQ1 (1<<30) +#define ZR36057_ICR_GIRQ0 (1<<29) +#define ZR36057_ICR_CodRepIRQ (1<<28) +#define ZR36057_ICR_JPEGRepIRQ (1<<27) +#define ZR36057_ICR_IntPinEn (1<<24) + +#define ZR36057_I2CBR 0x044 /* I2C Bus Register */ +#define ZR36057_I2CBR_SDA (1<<1) +#define ZR36057_I2CBR_SCL (1<<0) + +#define ZR36057_JMC 0x100 /* JPEG Mode and Control */ +#define ZR36057_JMC_JPG (1 << 31) +#define ZR36057_JMC_JPGExpMode (0 << 29) +#define ZR36057_JMC_JPGCmpMode (1 << 29) +#define ZR36057_JMC_MJPGExpMode (2 << 29) +#define ZR36057_JMC_MJPGCmpMode (3 << 29) +#define ZR36057_JMC_RTBUSY_FB (1 << 6) +#define ZR36057_JMC_Go_en (1 << 5) +#define ZR36057_JMC_SyncMstr (1 << 4) +#define ZR36057_JMC_Fld_per_buff (1 << 3) +#define ZR36057_JMC_VFIFO_FB (1 << 2) +#define ZR36057_JMC_CFIFO_FB (1 << 1) +#define ZR36057_JMC_Stll_LitEndian (1 << 0) + +#define ZR36057_JPC 0x104 /* JPEG Process Control */ +#define ZR36057_JPC_P_Reset (1 << 7) +#define ZR36057_JPC_CodTrnsEn (1 << 5) +#define ZR36057_JPC_Active (1 << 0) + +#define ZR36057_VSP 0x108 /* Vertical Sync Parameters */ +#define ZR36057_VSP_VsyncSize 16 +#define ZR36057_VSP_FrmTot 0 + +#define ZR36057_HSP 0x10c /* Horizontal Sync Parameters */ +#define ZR36057_HSP_HsyncStart 16 +#define ZR36057_HSP_LineTot 0 + +#define ZR36057_FHAP 0x110 /* Field Horizontal Active Portion */ +#define ZR36057_FHAP_NAX 16 +#define ZR36057_FHAP_PAX 0 + +#define ZR36057_FVAP 0x114 /* Field Vertical Active Portion */ +#define ZR36057_FVAP_NAY 16 +#define ZR36057_FVAP_PAY 0 + +#define ZR36057_FPP 0x118 /* Field Process Parameters */ +#define ZR36057_FPP_Odd_Even (1 << 0) + +#define ZR36057_JCBA 0x11c /* JPEG Code Base Address */ + +#define ZR36057_JCFT 0x120 /* JPEG Code FIFO Threshold */ + +#define ZR36057_JCGI 0x124 /* JPEG Codec Guest ID */ +#define ZR36057_JCGI_JPEGuestID 4 +#define ZR36057_JCGI_JPEGuestReg 0 + +#define ZR36057_GCR2 0x12c /* GuestBus Control Register (2) */ + +#define ZR36057_POR 0x200 /* Post Office Register */ +#define ZR36057_POR_POPen (1<<25) +#define ZR36057_POR_POTime (1<<24) +#define ZR36057_POR_PODir (1<<23) + +#define ZR36057_STR 0x300 /* "Still" Transfer Register */ + +#endif diff --git a/drivers/media/video/zoran/zr36060.c b/drivers/media/video/zoran/zr36060.c new file mode 100644 index 0000000..8e74054 --- /dev/null +++ b/drivers/media/video/zoran/zr36060.c @@ -0,0 +1,1014 @@ +/* + * Zoran ZR36060 basic configuration functions + * + * Copyright (C) 2002 Laurent Pinchart + * + * $Id: zr36060.c,v 1.1.2.22 2003/05/06 09:35:36 rbultje Exp $ + * + * ------------------------------------------------------------------------ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + * ------------------------------------------------------------------------ + */ + +#define ZR060_VERSION "v0.7" + +#include +#include +#include +#include + +#include +#include + +/* includes for structures and defines regarding video + #include */ + +/* I/O commands, error codes */ +#include +//#include + +/* headerfile of this module */ +#include "zr36060.h" + +/* codec io API */ +#include "videocodec.h" + +/* it doesn't make sense to have more than 20 or so, + just to prevent some unwanted loops */ +#define MAX_CODECS 20 + +/* amount of chips attached via this driver */ +static int zr36060_codecs; + +static int low_bitrate; +module_param(low_bitrate, bool, 0); +MODULE_PARM_DESC(low_bitrate, "Buz compatibility option, halves bitrate"); + +/* debugging is available via module parameter */ +static int debug; +module_param(debug, int, 0); +MODULE_PARM_DESC(debug, "Debug level (0-4)"); + +#define dprintk(num, format, args...) \ + do { \ + if (debug >= num) \ + printk(format, ##args); \ + } while (0) + +/* ========================================================================= + Local hardware I/O functions: + + read/write via codec layer (registers are located in the master device) + ========================================================================= */ + +/* read and write functions */ +static u8 +zr36060_read (struct zr36060 *ptr, + u16 reg) +{ + u8 value = 0; + + // just in case something is wrong... + if (ptr->codec->master_data->readreg) + value = (ptr->codec->master_data->readreg(ptr->codec, + reg)) & 0xff; + else + dprintk(1, + KERN_ERR "%s: invalid I/O setup, nothing read!\n", + ptr->name); + + //dprintk(4, "%s: reading from 0x%04x: %02x\n",ptr->name,reg,value); + + return value; +} + +static void +zr36060_write(struct zr36060 *ptr, + u16 reg, + u8 value) +{ + //dprintk(4, "%s: writing 0x%02x to 0x%04x\n",ptr->name,value,reg); + dprintk(4, "0x%02x @0x%04x\n", value, reg); + + // just in case something is wrong... + if (ptr->codec->master_data->writereg) + ptr->codec->master_data->writereg(ptr->codec, reg, value); + else + dprintk(1, + KERN_ERR + "%s: invalid I/O setup, nothing written!\n", + ptr->name); +} + +/* ========================================================================= + Local helper function: + + status read + ========================================================================= */ + +/* status is kept in datastructure */ +static u8 +zr36060_read_status (struct zr36060 *ptr) +{ + ptr->status = zr36060_read(ptr, ZR060_CFSR); + + zr36060_read(ptr, 0); + return ptr->status; +} + +/* ========================================================================= + Local helper function: + + scale factor read + ========================================================================= */ + +/* scale factor is kept in datastructure */ +static u16 +zr36060_read_scalefactor (struct zr36060 *ptr) +{ + ptr->scalefact = (zr36060_read(ptr, ZR060_SF_HI) << 8) | + (zr36060_read(ptr, ZR060_SF_LO) & 0xFF); + + /* leave 0 selected for an eventually GO from master */ + zr36060_read(ptr, 0); + return ptr->scalefact; +} + +/* ========================================================================= + Local helper function: + + wait if codec is ready to proceed (end of processing) or time is over + ========================================================================= */ + +static void +zr36060_wait_end (struct zr36060 *ptr) +{ + int i = 0; + + while (zr36060_read_status(ptr) & ZR060_CFSR_Busy) { + udelay(1); + if (i++ > 200000) { // 200ms, there is for sure something wrong!!! + dprintk(1, + "%s: timeout at wait_end (last status: 0x%02x)\n", + ptr->name, ptr->status); + break; + } + } +} + +/* ========================================================================= + Local helper function: + + basic test of "connectivity", writes/reads to/from memory the SOF marker + ========================================================================= */ + +static int +zr36060_basic_test (struct zr36060 *ptr) +{ + if ((zr36060_read(ptr, ZR060_IDR_DEV) != 0x33) && + (zr36060_read(ptr, ZR060_IDR_REV) != 0x01)) { + dprintk(1, + KERN_ERR + "%s: attach failed, can't connect to jpeg processor!\n", + ptr->name); + return -ENXIO; + } + + zr36060_wait_end(ptr); + if (ptr->status & ZR060_CFSR_Busy) { + dprintk(1, + KERN_ERR + "%s: attach failed, jpeg processor failed (end flag)!\n", + ptr->name); + return -EBUSY; + } + + return 0; /* looks good! */ +} + +/* ========================================================================= + Local helper function: + + simple loop for pushing the init datasets + ========================================================================= */ + +static int +zr36060_pushit (struct zr36060 *ptr, + u16 startreg, + u16 len, + const char *data) +{ + int i = 0; + + dprintk(4, "%s: write data block to 0x%04x (len=%d)\n", ptr->name, + startreg, len); + while (i < len) { + zr36060_write(ptr, startreg++, data[i++]); + } + + return i; +} + +/* ========================================================================= + Basic datasets: + + jpeg baseline setup data (you find it on lots places in internet, or just + extract it from any regular .jpg image...) + + Could be variable, but until it's not needed it they are just fixed to save + memory. Otherwise expand zr36060 structure with arrays, push the values to + it and initalize from there, as e.g. the linux zr36057/60 driver does it. + ========================================================================= */ + +static const char zr36060_dqt[0x86] = { + 0xff, 0xdb, //Marker: DQT + 0x00, 0x84, //Length: 2*65+2 + 0x00, //Pq,Tq first table + 0x10, 0x0b, 0x0c, 0x0e, 0x0c, 0x0a, 0x10, 0x0e, + 0x0d, 0x0e, 0x12, 0x11, 0x10, 0x13, 0x18, 0x28, + 0x1a, 0x18, 0x16, 0x16, 0x18, 0x31, 0x23, 0x25, + 0x1d, 0x28, 0x3a, 0x33, 0x3d, 0x3c, 0x39, 0x33, + 0x38, 0x37, 0x40, 0x48, 0x5c, 0x4e, 0x40, 0x44, + 0x57, 0x45, 0x37, 0x38, 0x50, 0x6d, 0x51, 0x57, + 0x5f, 0x62, 0x67, 0x68, 0x67, 0x3e, 0x4d, 0x71, + 0x79, 0x70, 0x64, 0x78, 0x5c, 0x65, 0x67, 0x63, + 0x01, //Pq,Tq second table + 0x11, 0x12, 0x12, 0x18, 0x15, 0x18, 0x2f, 0x1a, + 0x1a, 0x2f, 0x63, 0x42, 0x38, 0x42, 0x63, 0x63, + 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, + 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, + 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, + 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, + 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, + 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63 +}; + +static const char zr36060_dht[0x1a4] = { + 0xff, 0xc4, //Marker: DHT + 0x01, 0xa2, //Length: 2*AC, 2*DC + 0x00, //DC first table + 0x00, 0x01, 0x05, 0x01, 0x01, 0x01, 0x01, 0x01, + 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, + 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, 0x08, 0x09, 0x0A, 0x0B, + 0x01, //DC second table + 0x00, 0x03, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, + 0x01, 0x01, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, + 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, 0x08, 0x09, 0x0A, 0x0B, + 0x10, //AC first table + 0x00, 0x02, 0x01, 0x03, 0x03, 0x02, 0x04, 0x03, + 0x05, 0x05, 0x04, 0x04, 0x00, 0x00, + 0x01, 0x7D, 0x01, 0x02, 0x03, 0x00, 0x04, 0x11, + 0x05, 0x12, 0x21, 0x31, 0x41, 0x06, 0x13, 0x51, 0x61, + 0x07, 0x22, 0x71, 0x14, 0x32, 0x81, 0x91, 0xA1, + 0x08, 0x23, 0x42, 0xB1, 0xC1, 0x15, 0x52, 0xD1, 0xF0, 0x24, + 0x33, 0x62, 0x72, 0x82, 0x09, 0x0A, 0x16, 0x17, + 0x18, 0x19, 0x1A, 0x25, 0x26, 0x27, 0x28, 0x29, 0x2A, 0x34, + 0x35, 0x36, 0x37, 0x38, 0x39, 0x3A, 0x43, 0x44, + 0x45, 0x46, 0x47, 0x48, 0x49, 0x4A, 0x53, 0x54, 0x55, 0x56, + 0x57, 0x58, 0x59, 0x5A, 0x63, 0x64, 0x65, 0x66, + 0x67, 0x68, 0x69, 0x6A, 0x73, 0x74, 0x75, 0x76, 0x77, 0x78, + 0x79, 0x7A, 0x83, 0x84, 0x85, 0x86, 0x87, 0x88, + 0x89, 0x8A, 0x92, 0x93, 0x94, 0x95, 0x96, 0x97, 0x98, 0x99, + 0x9A, 0xA2, 0xA3, 0xA4, 0xA5, 0xA6, 0xA7, 0xA8, + 0xA9, 0xAA, 0xB2, 0xB3, 0xB4, 0xB5, 0xB6, 0xB7, 0xB8, 0xB9, + 0xBA, 0xC2, 0xC3, 0xC4, 0xC5, 0xC6, 0xC7, 0xC8, + 0xC9, 0xCA, 0xD2, 0xD3, 0xD4, 0xD5, 0xD6, 0xD7, 0xD8, 0xD9, + 0xDA, 0xE1, 0xE2, 0xE3, 0xE4, 0xE5, 0xE6, 0xE7, + 0xE8, 0xE9, 0xEA, 0xF1, 0xF2, 0xF3, 0xF4, 0xF5, 0xF6, 0xF7, + 0xF8, 0xF9, 0xFA, + 0x11, //AC second table + 0x00, 0x02, 0x01, 0x02, 0x04, 0x04, 0x03, 0x04, + 0x07, 0x05, 0x04, 0x04, 0x00, 0x01, + 0x02, 0x77, 0x00, 0x01, 0x02, 0x03, 0x11, 0x04, + 0x05, 0x21, 0x31, 0x06, 0x12, 0x41, 0x51, 0x07, 0x61, 0x71, + 0x13, 0x22, 0x32, 0x81, 0x08, 0x14, 0x42, 0x91, + 0xA1, 0xB1, 0xC1, 0x09, 0x23, 0x33, 0x52, 0xF0, 0x15, 0x62, + 0x72, 0xD1, 0x0A, 0x16, 0x24, 0x34, 0xE1, 0x25, + 0xF1, 0x17, 0x18, 0x19, 0x1A, 0x26, 0x27, 0x28, 0x29, 0x2A, + 0x35, 0x36, 0x37, 0x38, 0x39, 0x3A, 0x43, 0x44, + 0x45, 0x46, 0x47, 0x48, 0x49, 0x4A, 0x53, 0x54, 0x55, 0x56, + 0x57, 0x58, 0x59, 0x5A, 0x63, 0x64, 0x65, 0x66, + 0x67, 0x68, 0x69, 0x6A, 0x73, 0x74, 0x75, 0x76, 0x77, 0x78, + 0x79, 0x7A, 0x82, 0x83, 0x84, 0x85, 0x86, 0x87, + 0x88, 0x89, 0x8A, 0x92, 0x93, 0x94, 0x95, 0x96, 0x97, 0x98, + 0x99, 0x9A, 0xA2, 0xA3, 0xA4, 0xA5, 0xA6, 0xA7, + 0xA8, 0xA9, 0xAA, 0xB2, 0xB3, 0xB4, 0xB5, 0xB6, 0xB7, 0xB8, + 0xB9, 0xBA, 0xC2, 0xC3, 0xC4, 0xC5, 0xC6, 0xC7, + 0xC8, 0xC9, 0xCA, 0xD2, 0xD3, 0xD4, 0xD5, 0xD6, 0xD7, 0xD8, + 0xD9, 0xDA, 0xE2, 0xE3, 0xE4, 0xE5, 0xE6, 0xE7, + 0xE8, 0xE9, 0xEA, 0xF2, 0xF3, 0xF4, 0xF5, 0xF6, 0xF7, 0xF8, + 0xF9, 0xFA +}; + +/* jpeg baseline setup, this is just fixed in this driver (YUV pictures) */ +#define NO_OF_COMPONENTS 0x3 //Y,U,V +#define BASELINE_PRECISION 0x8 //MCU size (?) +static const char zr36060_tq[8] = { 0, 1, 1, 0, 0, 0, 0, 0 }; //table idx's QT +static const char zr36060_td[8] = { 0, 1, 1, 0, 0, 0, 0, 0 }; //table idx's DC +static const char zr36060_ta[8] = { 0, 1, 1, 0, 0, 0, 0, 0 }; //table idx's AC + +/* horizontal 422 decimation setup (maybe we support 411 or so later, too) */ +static const char zr36060_decimation_h[8] = { 2, 1, 1, 0, 0, 0, 0, 0 }; +static const char zr36060_decimation_v[8] = { 1, 1, 1, 0, 0, 0, 0, 0 }; + +/* ========================================================================= + Local helper functions: + + calculation and setup of parameter-dependent JPEG baseline segments + (needed for compression only) + ========================================================================= */ + +/* ------------------------------------------------------------------------- */ + +/* SOF (start of frame) segment depends on width, height and sampling ratio + of each color component */ + +static int +zr36060_set_sof (struct zr36060 *ptr) +{ + char sof_data[34]; // max. size of register set + int i; + + dprintk(3, "%s: write SOF (%dx%d, %d components)\n", ptr->name, + ptr->width, ptr->height, NO_OF_COMPONENTS); + sof_data[0] = 0xff; + sof_data[1] = 0xc0; + sof_data[2] = 0x00; + sof_data[3] = (3 * NO_OF_COMPONENTS) + 8; + sof_data[4] = BASELINE_PRECISION; // only '8' possible with zr36060 + sof_data[5] = (ptr->height) >> 8; + sof_data[6] = (ptr->height) & 0xff; + sof_data[7] = (ptr->width) >> 8; + sof_data[8] = (ptr->width) & 0xff; + sof_data[9] = NO_OF_COMPONENTS; + for (i = 0; i < NO_OF_COMPONENTS; i++) { + sof_data[10 + (i * 3)] = i; // index identifier + sof_data[11 + (i * 3)] = (ptr->h_samp_ratio[i] << 4) | + (ptr->v_samp_ratio[i]); // sampling ratios + sof_data[12 + (i * 3)] = zr36060_tq[i]; // Q table selection + } + return zr36060_pushit(ptr, ZR060_SOF_IDX, + (3 * NO_OF_COMPONENTS) + 10, sof_data); +} + +/* ------------------------------------------------------------------------- */ + +/* SOS (start of scan) segment depends on the used scan components + of each color component */ + +static int +zr36060_set_sos (struct zr36060 *ptr) +{ + char sos_data[16]; // max. size of register set + int i; + + dprintk(3, "%s: write SOS\n", ptr->name); + sos_data[0] = 0xff; + sos_data[1] = 0xda; + sos_data[2] = 0x00; + sos_data[3] = 2 + 1 + (2 * NO_OF_COMPONENTS) + 3; + sos_data[4] = NO_OF_COMPONENTS; + for (i = 0; i < NO_OF_COMPONENTS; i++) { + sos_data[5 + (i * 2)] = i; // index + sos_data[6 + (i * 2)] = (zr36060_td[i] << 4) | + zr36060_ta[i]; // AC/DC tbl.sel. + } + sos_data[2 + 1 + (2 * NO_OF_COMPONENTS) + 2] = 00; // scan start + sos_data[2 + 1 + (2 * NO_OF_COMPONENTS) + 3] = 0x3f; + sos_data[2 + 1 + (2 * NO_OF_COMPONENTS) + 4] = 00; + return zr36060_pushit(ptr, ZR060_SOS_IDX, + 4 + 1 + (2 * NO_OF_COMPONENTS) + 3, + sos_data); +} + +/* ------------------------------------------------------------------------- */ + +/* DRI (define restart interval) */ + +static int +zr36060_set_dri (struct zr36060 *ptr) +{ + char dri_data[6]; // max. size of register set + + dprintk(3, "%s: write DRI\n", ptr->name); + dri_data[0] = 0xff; + dri_data[1] = 0xdd; + dri_data[2] = 0x00; + dri_data[3] = 0x04; + dri_data[4] = (ptr->dri) >> 8; + dri_data[5] = (ptr->dri) & 0xff; + return zr36060_pushit(ptr, ZR060_DRI_IDX, 6, dri_data); +} + +/* ========================================================================= + Setup function: + + Setup compression/decompression of Zoran's JPEG processor + ( see also zoran 36060 manual ) + + ... sorry for the spaghetti code ... + ========================================================================= */ +static void +zr36060_init (struct zr36060 *ptr) +{ + int sum = 0; + long bitcnt, tmp; + + if (ptr->mode == CODEC_DO_COMPRESSION) { + dprintk(2, "%s: COMPRESSION SETUP\n", ptr->name); + + zr36060_write(ptr, ZR060_LOAD, ZR060_LOAD_SyncRst); + + /* 060 communicates with 067 in master mode */ + zr36060_write(ptr, ZR060_CIR, ZR060_CIR_CodeMstr); + + /* Compression with or without variable scale factor */ + /*FIXME: What about ptr->bitrate_ctrl? */ + zr36060_write(ptr, ZR060_CMR, + ZR060_CMR_Comp | ZR060_CMR_Pass2 | + ZR060_CMR_BRB); + + /* Must be zero */ + zr36060_write(ptr, ZR060_MBZ, 0x00); + zr36060_write(ptr, ZR060_TCR_HI, 0x00); + zr36060_write(ptr, ZR060_TCR_LO, 0x00); + + /* Disable all IRQs - no DataErr means autoreset */ + zr36060_write(ptr, ZR060_IMR, 0); + + /* volume control settings */ + zr36060_write(ptr, ZR060_SF_HI, ptr->scalefact >> 8); + zr36060_write(ptr, ZR060_SF_LO, ptr->scalefact & 0xff); + + zr36060_write(ptr, ZR060_AF_HI, 0xff); + zr36060_write(ptr, ZR060_AF_M, 0xff); + zr36060_write(ptr, ZR060_AF_LO, 0xff); + + /* setup the variable jpeg tables */ + sum += zr36060_set_sof(ptr); + sum += zr36060_set_sos(ptr); + sum += zr36060_set_dri(ptr); + + /* setup the fixed jpeg tables - maybe variable, though - + * (see table init section above) */ + sum += + zr36060_pushit(ptr, ZR060_DQT_IDX, sizeof(zr36060_dqt), + zr36060_dqt); + sum += + zr36060_pushit(ptr, ZR060_DHT_IDX, sizeof(zr36060_dht), + zr36060_dht); + zr36060_write(ptr, ZR060_APP_IDX, 0xff); + zr36060_write(ptr, ZR060_APP_IDX + 1, 0xe0 + ptr->app.appn); + zr36060_write(ptr, ZR060_APP_IDX + 2, 0x00); + zr36060_write(ptr, ZR060_APP_IDX + 3, ptr->app.len + 2); + sum += zr36060_pushit(ptr, ZR060_APP_IDX + 4, 60, + ptr->app.data) + 4; + zr36060_write(ptr, ZR060_COM_IDX, 0xff); + zr36060_write(ptr, ZR060_COM_IDX + 1, 0xfe); + zr36060_write(ptr, ZR060_COM_IDX + 2, 0x00); + zr36060_write(ptr, ZR060_COM_IDX + 3, ptr->com.len + 2); + sum += zr36060_pushit(ptr, ZR060_COM_IDX + 4, 60, + ptr->com.data) + 4; + + /* setup misc. data for compression (target code sizes) */ + + /* size of compressed code to reach without header data */ + sum = ptr->real_code_vol - sum; + bitcnt = sum << 3; /* need the size in bits */ + + tmp = bitcnt >> 16; + dprintk(3, + "%s: code: csize=%d, tot=%d, bit=%ld, highbits=%ld\n", + ptr->name, sum, ptr->real_code_vol, bitcnt, tmp); + zr36060_write(ptr, ZR060_TCV_NET_HI, tmp >> 8); + zr36060_write(ptr, ZR060_TCV_NET_MH, tmp & 0xff); + tmp = bitcnt & 0xffff; + zr36060_write(ptr, ZR060_TCV_NET_ML, tmp >> 8); + zr36060_write(ptr, ZR060_TCV_NET_LO, tmp & 0xff); + + bitcnt -= bitcnt >> 7; // bits without stuffing + bitcnt -= ((bitcnt * 5) >> 6); // bits without eob + + tmp = bitcnt >> 16; + dprintk(3, "%s: code: nettobit=%ld, highnettobits=%ld\n", + ptr->name, bitcnt, tmp); + zr36060_write(ptr, ZR060_TCV_DATA_HI, tmp >> 8); + zr36060_write(ptr, ZR060_TCV_DATA_MH, tmp & 0xff); + tmp = bitcnt & 0xffff; + zr36060_write(ptr, ZR060_TCV_DATA_ML, tmp >> 8); + zr36060_write(ptr, ZR060_TCV_DATA_LO, tmp & 0xff); + + /* JPEG markers to be included in the compressed stream */ + zr36060_write(ptr, ZR060_MER, + ZR060_MER_DQT | ZR060_MER_DHT | + ((ptr->com.len > 0) ? ZR060_MER_Com : 0) | + ((ptr->app.len > 0) ? ZR060_MER_App : 0)); + + /* Setup the Video Frontend */ + /* Limit pixel range to 16..235 as per CCIR-601 */ + zr36060_write(ptr, ZR060_VCR, ZR060_VCR_Range); + + } else { + dprintk(2, "%s: EXPANSION SETUP\n", ptr->name); + + zr36060_write(ptr, ZR060_LOAD, ZR060_LOAD_SyncRst); + + /* 060 communicates with 067 in master mode */ + zr36060_write(ptr, ZR060_CIR, ZR060_CIR_CodeMstr); + + /* Decompression */ + zr36060_write(ptr, ZR060_CMR, 0); + + /* Must be zero */ + zr36060_write(ptr, ZR060_MBZ, 0x00); + zr36060_write(ptr, ZR060_TCR_HI, 0x00); + zr36060_write(ptr, ZR060_TCR_LO, 0x00); + + /* Disable all IRQs - no DataErr means autoreset */ + zr36060_write(ptr, ZR060_IMR, 0); + + /* setup misc. data for expansion */ + zr36060_write(ptr, ZR060_MER, 0); + + /* setup the fixed jpeg tables - maybe variable, though - + * (see table init section above) */ + zr36060_pushit(ptr, ZR060_DHT_IDX, sizeof(zr36060_dht), + zr36060_dht); + + /* Setup the Video Frontend */ + //zr36060_write(ptr, ZR060_VCR, ZR060_VCR_FIExt); + //this doesn't seem right and doesn't work... + zr36060_write(ptr, ZR060_VCR, ZR060_VCR_Range); + } + + /* Load the tables */ + zr36060_write(ptr, ZR060_LOAD, + ZR060_LOAD_SyncRst | ZR060_LOAD_Load); + zr36060_wait_end(ptr); + dprintk(2, "%s: Status after table preload: 0x%02x\n", ptr->name, + ptr->status); + + if (ptr->status & ZR060_CFSR_Busy) { + dprintk(1, KERN_ERR "%s: init aborted!\n", ptr->name); + return; // something is wrong, its timed out!!!! + } +} + +/* ========================================================================= + CODEC API FUNCTIONS + + this functions are accessed by the master via the API structure + ========================================================================= */ + +/* set compression/expansion mode and launches codec - + this should be the last call from the master before starting processing */ +static int +zr36060_set_mode (struct videocodec *codec, + int mode) +{ + struct zr36060 *ptr = (struct zr36060 *) codec->data; + + dprintk(2, "%s: set_mode %d call\n", ptr->name, mode); + + if ((mode != CODEC_DO_EXPANSION) && (mode != CODEC_DO_COMPRESSION)) + return -EINVAL; + + ptr->mode = mode; + zr36060_init(ptr); + + return 0; +} + +/* set picture size (norm is ignored as the codec doesn't know about it) */ +static int +zr36060_set_video (struct videocodec *codec, + struct tvnorm *norm, + struct vfe_settings *cap, + struct vfe_polarity *pol) +{ + struct zr36060 *ptr = (struct zr36060 *) codec->data; + u32 reg; + int size; + + dprintk(2, "%s: set_video %d/%d-%dx%d (%%%d) call\n", ptr->name, + cap->x, cap->y, cap->width, cap->height, cap->decimation); + + /* if () return -EINVAL; + * trust the master driver that it knows what it does - so + * we allow invalid startx/y and norm for now ... */ + ptr->width = cap->width / (cap->decimation & 0xff); + ptr->height = cap->height / (cap->decimation >> 8); + + zr36060_write(ptr, ZR060_LOAD, ZR060_LOAD_SyncRst); + + /* Note that VSPol/HSPol bits in zr36060 have the opposite + * meaning of their zr360x7 counterparts with the same names + * N.b. for VSPol this is only true if FIVEdge = 0 (default, + * left unchanged here - in accordance with datasheet). + */ + reg = (!pol->vsync_pol ? ZR060_VPR_VSPol : 0) + | (!pol->hsync_pol ? ZR060_VPR_HSPol : 0) + | (pol->field_pol ? ZR060_VPR_FIPol : 0) + | (pol->blank_pol ? ZR060_VPR_BLPol : 0) + | (pol->subimg_pol ? ZR060_VPR_SImgPol : 0) + | (pol->poe_pol ? ZR060_VPR_PoePol : 0) + | (pol->pvalid_pol ? ZR060_VPR_PValPol : 0) + | (pol->vclk_pol ? ZR060_VPR_VCLKPol : 0); + zr36060_write(ptr, ZR060_VPR, reg); + + reg = 0; + switch (cap->decimation & 0xff) { + default: + case 1: + break; + + case 2: + reg |= ZR060_SR_HScale2; + break; + + case 4: + reg |= ZR060_SR_HScale4; + break; + } + + switch (cap->decimation >> 8) { + default: + case 1: + break; + + case 2: + reg |= ZR060_SR_VScale; + break; + } + zr36060_write(ptr, ZR060_SR, reg); + + zr36060_write(ptr, ZR060_BCR_Y, 0x00); + zr36060_write(ptr, ZR060_BCR_U, 0x80); + zr36060_write(ptr, ZR060_BCR_V, 0x80); + + /* sync generator */ + + reg = norm->Ht - 1; /* Vtotal */ + zr36060_write(ptr, ZR060_SGR_VTOTAL_HI, (reg >> 8) & 0xff); + zr36060_write(ptr, ZR060_SGR_VTOTAL_LO, (reg >> 0) & 0xff); + + reg = norm->Wt - 1; /* Htotal */ + zr36060_write(ptr, ZR060_SGR_HTOTAL_HI, (reg >> 8) & 0xff); + zr36060_write(ptr, ZR060_SGR_HTOTAL_LO, (reg >> 0) & 0xff); + + reg = 6 - 1; /* VsyncSize */ + zr36060_write(ptr, ZR060_SGR_VSYNC, reg); + + //reg = 30 - 1; /* HsyncSize */ +///*CP*/ reg = (zr->params.norm == 1 ? 57 : 68); + reg = 68; + zr36060_write(ptr, ZR060_SGR_HSYNC, reg); + + reg = norm->VStart - 1; /* BVstart */ + zr36060_write(ptr, ZR060_SGR_BVSTART, reg); + + reg += norm->Ha / 2; /* BVend */ + zr36060_write(ptr, ZR060_SGR_BVEND_HI, (reg >> 8) & 0xff); + zr36060_write(ptr, ZR060_SGR_BVEND_LO, (reg >> 0) & 0xff); + + reg = norm->HStart - 1; /* BHstart */ + zr36060_write(ptr, ZR060_SGR_BHSTART, reg); + + reg += norm->Wa; /* BHend */ + zr36060_write(ptr, ZR060_SGR_BHEND_HI, (reg >> 8) & 0xff); + zr36060_write(ptr, ZR060_SGR_BHEND_LO, (reg >> 0) & 0xff); + + /* active area */ + reg = cap->y + norm->VStart; /* Vstart */ + zr36060_write(ptr, ZR060_AAR_VSTART_HI, (reg >> 8) & 0xff); + zr36060_write(ptr, ZR060_AAR_VSTART_LO, (reg >> 0) & 0xff); + + reg += cap->height; /* Vend */ + zr36060_write(ptr, ZR060_AAR_VEND_HI, (reg >> 8) & 0xff); + zr36060_write(ptr, ZR060_AAR_VEND_LO, (reg >> 0) & 0xff); + + reg = cap->x + norm->HStart; /* Hstart */ + zr36060_write(ptr, ZR060_AAR_HSTART_HI, (reg >> 8) & 0xff); + zr36060_write(ptr, ZR060_AAR_HSTART_LO, (reg >> 0) & 0xff); + + reg += cap->width; /* Hend */ + zr36060_write(ptr, ZR060_AAR_HEND_HI, (reg >> 8) & 0xff); + zr36060_write(ptr, ZR060_AAR_HEND_LO, (reg >> 0) & 0xff); + + /* subimage area */ + reg = norm->VStart - 4; /* SVstart */ + zr36060_write(ptr, ZR060_SWR_VSTART_HI, (reg >> 8) & 0xff); + zr36060_write(ptr, ZR060_SWR_VSTART_LO, (reg >> 0) & 0xff); + + reg += norm->Ha / 2 + 8; /* SVend */ + zr36060_write(ptr, ZR060_SWR_VEND_HI, (reg >> 8) & 0xff); + zr36060_write(ptr, ZR060_SWR_VEND_LO, (reg >> 0) & 0xff); + + reg = norm->HStart /*+ 64 */ - 4; /* SHstart */ + zr36060_write(ptr, ZR060_SWR_HSTART_HI, (reg >> 8) & 0xff); + zr36060_write(ptr, ZR060_SWR_HSTART_LO, (reg >> 0) & 0xff); + + reg += norm->Wa + 8; /* SHend */ + zr36060_write(ptr, ZR060_SWR_HEND_HI, (reg >> 8) & 0xff); + zr36060_write(ptr, ZR060_SWR_HEND_LO, (reg >> 0) & 0xff); + + size = ptr->width * ptr->height; + /* Target compressed field size in bits: */ + size = size * 16; /* uncompressed size in bits */ + /* (Ronald) by default, quality = 100 is a compression + * ratio 1:2. Setting low_bitrate (insmod option) sets + * it to 1:4 (instead of 1:2, zr36060 max) as limit because the + * buz can't handle more at decimation=1... Use low_bitrate if + * you have a Buz, unless you know what you're doing */ + size = size * cap->quality / (low_bitrate ? 400 : 200); + /* Lower limit (arbitrary, 1 KB) */ + if (size < 8192) + size = 8192; + /* Upper limit: 7/8 of the code buffers */ + if (size > ptr->total_code_vol * 7) + size = ptr->total_code_vol * 7; + + ptr->real_code_vol = size >> 3; /* in bytes */ + + /* the MBCVR is the *maximum* block volume, according to the + * JPEG ISO specs, this shouldn't be used, since that allows + * for the best encoding quality. So set it to it's max value */ + reg = ptr->max_block_vol; + zr36060_write(ptr, ZR060_MBCVR, reg); + + return 0; +} + +/* additional control functions */ +static int +zr36060_control (struct videocodec *codec, + int type, + int size, + void *data) +{ + struct zr36060 *ptr = (struct zr36060 *) codec->data; + int *ival = (int *) data; + + dprintk(2, "%s: control %d call with %d byte\n", ptr->name, type, + size); + + switch (type) { + case CODEC_G_STATUS: /* get last status */ + if (size != sizeof(int)) + return -EFAULT; + zr36060_read_status(ptr); + *ival = ptr->status; + break; + + case CODEC_G_CODEC_MODE: + if (size != sizeof(int)) + return -EFAULT; + *ival = CODEC_MODE_BJPG; + break; + + case CODEC_S_CODEC_MODE: + if (size != sizeof(int)) + return -EFAULT; + if (*ival != CODEC_MODE_BJPG) + return -EINVAL; + /* not needed, do nothing */ + return 0; + + case CODEC_G_VFE: + case CODEC_S_VFE: + /* not needed, do nothing */ + return 0; + + case CODEC_S_MMAP: + /* not available, give an error */ + return -ENXIO; + + case CODEC_G_JPEG_TDS_BYTE: /* get target volume in byte */ + if (size != sizeof(int)) + return -EFAULT; + *ival = ptr->total_code_vol; + break; + + case CODEC_S_JPEG_TDS_BYTE: /* get target volume in byte */ + if (size != sizeof(int)) + return -EFAULT; + ptr->total_code_vol = *ival; + ptr->real_code_vol = (ptr->total_code_vol * 6) >> 3; + break; + + case CODEC_G_JPEG_SCALE: /* get scaling factor */ + if (size != sizeof(int)) + return -EFAULT; + *ival = zr36060_read_scalefactor(ptr); + break; + + case CODEC_S_JPEG_SCALE: /* set scaling factor */ + if (size != sizeof(int)) + return -EFAULT; + ptr->scalefact = *ival; + break; + + case CODEC_G_JPEG_APP_DATA: { /* get appn marker data */ + struct jpeg_app_marker *app = data; + + if (size != sizeof(struct jpeg_app_marker)) + return -EFAULT; + + *app = ptr->app; + break; + } + + case CODEC_S_JPEG_APP_DATA: { /* set appn marker data */ + struct jpeg_app_marker *app = data; + + if (size != sizeof(struct jpeg_app_marker)) + return -EFAULT; + + ptr->app = *app; + break; + } + + case CODEC_G_JPEG_COM_DATA: { /* get comment marker data */ + struct jpeg_com_marker *com = data; + + if (size != sizeof(struct jpeg_com_marker)) + return -EFAULT; + + *com = ptr->com; + break; + } + + case CODEC_S_JPEG_COM_DATA: { /* set comment marker data */ + struct jpeg_com_marker *com = data; + + if (size != sizeof(struct jpeg_com_marker)) + return -EFAULT; + + ptr->com = *com; + break; + } + + default: + return -EINVAL; + } + + return size; +} + +/* ========================================================================= + Exit and unregister function: + + Deinitializes Zoran's JPEG processor + ========================================================================= */ + +static int +zr36060_unset (struct videocodec *codec) +{ + struct zr36060 *ptr = codec->data; + + if (ptr) { + /* do wee need some codec deinit here, too ???? */ + + dprintk(1, "%s: finished codec #%d\n", ptr->name, + ptr->num); + kfree(ptr); + codec->data = NULL; + + zr36060_codecs--; + return 0; + } + + return -EFAULT; +} + +/* ========================================================================= + Setup and registry function: + + Initializes Zoran's JPEG processor + + Also sets pixel size, average code size, mode (compr./decompr.) + (the given size is determined by the processor with the video interface) + ========================================================================= */ + +static int +zr36060_setup (struct videocodec *codec) +{ + struct zr36060 *ptr; + int res; + + dprintk(2, "zr36060: initializing MJPEG subsystem #%d.\n", + zr36060_codecs); + + if (zr36060_codecs == MAX_CODECS) { + dprintk(1, + KERN_ERR "zr36060: Can't attach more codecs!\n"); + return -ENOSPC; + } + //mem structure init + codec->data = ptr = kzalloc(sizeof(struct zr36060), GFP_KERNEL); + if (NULL == ptr) { + dprintk(1, KERN_ERR "zr36060: Can't get enough memory!\n"); + return -ENOMEM; + } + + snprintf(ptr->name, sizeof(ptr->name), "zr36060[%d]", + zr36060_codecs); + ptr->num = zr36060_codecs++; + ptr->codec = codec; + + //testing + res = zr36060_basic_test(ptr); + if (res < 0) { + zr36060_unset(codec); + return res; + } + //final setup + memcpy(ptr->h_samp_ratio, zr36060_decimation_h, 8); + memcpy(ptr->v_samp_ratio, zr36060_decimation_v, 8); + + ptr->bitrate_ctrl = 0; /* 0 or 1 - fixed file size flag + * (what is the difference?) */ + ptr->mode = CODEC_DO_COMPRESSION; + ptr->width = 384; + ptr->height = 288; + ptr->total_code_vol = 16000; /* CHECKME */ + ptr->real_code_vol = (ptr->total_code_vol * 6) >> 3; + ptr->max_block_vol = 240; /* CHECKME, was 120 is 240 */ + ptr->scalefact = 0x100; + ptr->dri = 1; /* CHECKME, was 8 is 1 */ + + /* by default, no COM or APP markers - app should set those */ + ptr->com.len = 0; + ptr->app.appn = 0; + ptr->app.len = 0; + + zr36060_init(ptr); + + dprintk(1, KERN_INFO "%s: codec attached and running\n", + ptr->name); + + return 0; +} + +static const struct videocodec zr36060_codec = { + .owner = THIS_MODULE, + .name = "zr36060", + .magic = 0L, // magic not used + .flags = + CODEC_FLAG_JPEG | CODEC_FLAG_HARDWARE | CODEC_FLAG_ENCODER | + CODEC_FLAG_DECODER | CODEC_FLAG_VFE, + .type = CODEC_TYPE_ZR36060, + .setup = zr36060_setup, // functionality + .unset = zr36060_unset, + .set_mode = zr36060_set_mode, + .set_video = zr36060_set_video, + .control = zr36060_control, + // others are not used +}; + +/* ========================================================================= + HOOK IN DRIVER AS KERNEL MODULE + ========================================================================= */ + +static int __init +zr36060_init_module (void) +{ + //dprintk(1, "zr36060 driver %s\n",ZR060_VERSION); + zr36060_codecs = 0; + return videocodec_register(&zr36060_codec); +} + +static void __exit +zr36060_cleanup_module (void) +{ + if (zr36060_codecs) { + dprintk(1, + "zr36060: something's wrong - %d codecs left somehow.\n", + zr36060_codecs); + } + + /* however, we can't just stay alive */ + videocodec_unregister(&zr36060_codec); +} + +module_init(zr36060_init_module); +module_exit(zr36060_cleanup_module); + +MODULE_AUTHOR("Laurent Pinchart "); +MODULE_DESCRIPTION("Driver module for ZR36060 jpeg processors " + ZR060_VERSION); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/video/zoran/zr36060.h b/drivers/media/video/zoran/zr36060.h new file mode 100644 index 0000000..914ffa4 --- /dev/null +++ b/drivers/media/video/zoran/zr36060.h @@ -0,0 +1,220 @@ +/* + * Zoran ZR36060 basic configuration functions - header file + * + * Copyright (C) 2002 Laurent Pinchart + * + * $Id: zr36060.h,v 1.1.1.1.2.3 2003/01/14 21:18:47 rbultje Exp $ + * + * ------------------------------------------------------------------------ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + * ------------------------------------------------------------------------ + */ + +#ifndef ZR36060_H +#define ZR36060_H + +#include "videocodec.h" + +/* data stored for each zoran jpeg codec chip */ +struct zr36060 { + char name[32]; + int num; + /* io datastructure */ + struct videocodec *codec; + // last coder status + __u8 status; + // actual coder setup + int mode; + + __u16 width; + __u16 height; + + __u16 bitrate_ctrl; + + __u32 total_code_vol; + __u32 real_code_vol; + __u16 max_block_vol; + + __u8 h_samp_ratio[8]; + __u8 v_samp_ratio[8]; + __u16 scalefact; + __u16 dri; + + /* app/com marker data */ + struct jpeg_app_marker app; + struct jpeg_com_marker com; +}; + +/* ZR36060 register addresses */ +#define ZR060_LOAD 0x000 +#define ZR060_CFSR 0x001 +#define ZR060_CIR 0x002 +#define ZR060_CMR 0x003 +#define ZR060_MBZ 0x004 +#define ZR060_MBCVR 0x005 +#define ZR060_MER 0x006 +#define ZR060_IMR 0x007 +#define ZR060_ISR 0x008 +#define ZR060_TCV_NET_HI 0x009 +#define ZR060_TCV_NET_MH 0x00a +#define ZR060_TCV_NET_ML 0x00b +#define ZR060_TCV_NET_LO 0x00c +#define ZR060_TCV_DATA_HI 0x00d +#define ZR060_TCV_DATA_MH 0x00e +#define ZR060_TCV_DATA_ML 0x00f +#define ZR060_TCV_DATA_LO 0x010 +#define ZR060_SF_HI 0x011 +#define ZR060_SF_LO 0x012 +#define ZR060_AF_HI 0x013 +#define ZR060_AF_M 0x014 +#define ZR060_AF_LO 0x015 +#define ZR060_ACV_HI 0x016 +#define ZR060_ACV_MH 0x017 +#define ZR060_ACV_ML 0x018 +#define ZR060_ACV_LO 0x019 +#define ZR060_ACT_HI 0x01a +#define ZR060_ACT_MH 0x01b +#define ZR060_ACT_ML 0x01c +#define ZR060_ACT_LO 0x01d +#define ZR060_ACV_TRUN_HI 0x01e +#define ZR060_ACV_TRUN_MH 0x01f +#define ZR060_ACV_TRUN_ML 0x020 +#define ZR060_ACV_TRUN_LO 0x021 +#define ZR060_IDR_DEV 0x022 +#define ZR060_IDR_REV 0x023 +#define ZR060_TCR_HI 0x024 +#define ZR060_TCR_LO 0x025 +#define ZR060_VCR 0x030 +#define ZR060_VPR 0x031 +#define ZR060_SR 0x032 +#define ZR060_BCR_Y 0x033 +#define ZR060_BCR_U 0x034 +#define ZR060_BCR_V 0x035 +#define ZR060_SGR_VTOTAL_HI 0x036 +#define ZR060_SGR_VTOTAL_LO 0x037 +#define ZR060_SGR_HTOTAL_HI 0x038 +#define ZR060_SGR_HTOTAL_LO 0x039 +#define ZR060_SGR_VSYNC 0x03a +#define ZR060_SGR_HSYNC 0x03b +#define ZR060_SGR_BVSTART 0x03c +#define ZR060_SGR_BHSTART 0x03d +#define ZR060_SGR_BVEND_HI 0x03e +#define ZR060_SGR_BVEND_LO 0x03f +#define ZR060_SGR_BHEND_HI 0x040 +#define ZR060_SGR_BHEND_LO 0x041 +#define ZR060_AAR_VSTART_HI 0x042 +#define ZR060_AAR_VSTART_LO 0x043 +#define ZR060_AAR_VEND_HI 0x044 +#define ZR060_AAR_VEND_LO 0x045 +#define ZR060_AAR_HSTART_HI 0x046 +#define ZR060_AAR_HSTART_LO 0x047 +#define ZR060_AAR_HEND_HI 0x048 +#define ZR060_AAR_HEND_LO 0x049 +#define ZR060_SWR_VSTART_HI 0x04a +#define ZR060_SWR_VSTART_LO 0x04b +#define ZR060_SWR_VEND_HI 0x04c +#define ZR060_SWR_VEND_LO 0x04d +#define ZR060_SWR_HSTART_HI 0x04e +#define ZR060_SWR_HSTART_LO 0x04f +#define ZR060_SWR_HEND_HI 0x050 +#define ZR060_SWR_HEND_LO 0x051 + +#define ZR060_SOF_IDX 0x060 +#define ZR060_SOS_IDX 0x07a +#define ZR060_DRI_IDX 0x0c0 +#define ZR060_DQT_IDX 0x0cc +#define ZR060_DHT_IDX 0x1d4 +#define ZR060_APP_IDX 0x380 +#define ZR060_COM_IDX 0x3c0 + +/* ZR36060 LOAD register bits */ + +#define ZR060_LOAD_Load (1 << 7) +#define ZR060_LOAD_SyncRst (1 << 0) + +/* ZR36060 Code FIFO Status register bits */ + +#define ZR060_CFSR_Busy (1 << 7) +#define ZR060_CFSR_CBusy (1 << 2) +#define ZR060_CFSR_CFIFO (3 << 0) + +/* ZR36060 Code Interface register */ + +#define ZR060_CIR_Code16 (1 << 7) +#define ZR060_CIR_Endian (1 << 6) +#define ZR060_CIR_CFIS (1 << 2) +#define ZR060_CIR_CodeMstr (1 << 0) + +/* ZR36060 Codec Mode register */ + +#define ZR060_CMR_Comp (1 << 7) +#define ZR060_CMR_ATP (1 << 6) +#define ZR060_CMR_Pass2 (1 << 5) +#define ZR060_CMR_TLM (1 << 4) +#define ZR060_CMR_BRB (1 << 2) +#define ZR060_CMR_FSF (1 << 1) + +/* ZR36060 Markers Enable register */ + +#define ZR060_MER_App (1 << 7) +#define ZR060_MER_Com (1 << 6) +#define ZR060_MER_DRI (1 << 5) +#define ZR060_MER_DQT (1 << 4) +#define ZR060_MER_DHT (1 << 3) + +/* ZR36060 Interrupt Mask register */ + +#define ZR060_IMR_EOAV (1 << 3) +#define ZR060_IMR_EOI (1 << 2) +#define ZR060_IMR_End (1 << 1) +#define ZR060_IMR_DataErr (1 << 0) + +/* ZR36060 Interrupt Status register */ + +#define ZR060_ISR_ProCnt (3 << 6) +#define ZR060_ISR_EOAV (1 << 3) +#define ZR060_ISR_EOI (1 << 2) +#define ZR060_ISR_End (1 << 1) +#define ZR060_ISR_DataErr (1 << 0) + +/* ZR36060 Video Control register */ + +#define ZR060_VCR_Video8 (1 << 7) +#define ZR060_VCR_Range (1 << 6) +#define ZR060_VCR_FIDet (1 << 3) +#define ZR060_VCR_FIVedge (1 << 2) +#define ZR060_VCR_FIExt (1 << 1) +#define ZR060_VCR_SyncMstr (1 << 0) + +/* ZR36060 Video Polarity register */ + +#define ZR060_VPR_VCLKPol (1 << 7) +#define ZR060_VPR_PValPol (1 << 6) +#define ZR060_VPR_PoePol (1 << 5) +#define ZR060_VPR_SImgPol (1 << 4) +#define ZR060_VPR_BLPol (1 << 3) +#define ZR060_VPR_FIPol (1 << 2) +#define ZR060_VPR_HSPol (1 << 1) +#define ZR060_VPR_VSPol (1 << 0) + +/* ZR36060 Scaling register */ + +#define ZR060_SR_VScale (1 << 2) +#define ZR060_SR_HScale2 (1 << 0) +#define ZR060_SR_HScale4 (2 << 0) + +#endif /*fndef ZR36060_H */ diff --git a/drivers/media/video/zoran_card.c b/drivers/media/video/zoran_card.c deleted file mode 100644 index 3282be7..0000000 --- a/drivers/media/video/zoran_card.c +++ /dev/null @@ -1,1670 +0,0 @@ -/* - * Zoran zr36057/zr36067 PCI controller driver, for the - * Pinnacle/Miro DC10/DC10+/DC30/DC30+, Iomega Buz, Linux - * Media Labs LML33/LML33R10. - * - * This part handles card-specific data and detection - * - * Copyright (C) 2000 Serguei Miridonov - * - * Currently maintained by: - * Ronald Bultje - * Laurent Pinchart - * Mailinglist - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#include - -#include -#include -#include -#include -#include - -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include -#include - -#include - -#include "videocodec.h" -#include "zoran.h" -#include "zoran_card.h" -#include "zoran_device.h" -#include "zoran_procfs.h" - -extern const struct zoran_format zoran_formats[]; - -static int card[BUZ_MAX] = { -1, -1, -1, -1 }; -module_param_array(card, int, NULL, 0444); -MODULE_PARM_DESC(card, "The type of card"); - -static int encoder[BUZ_MAX] = { -1, -1, -1, -1 }; -module_param_array(encoder, int, NULL, 0444); -MODULE_PARM_DESC(encoder, "i2c TV encoder"); - -static int decoder[BUZ_MAX] = { -1, -1, -1, -1 }; -module_param_array(decoder, int, NULL, 0444); -MODULE_PARM_DESC(decoder, "i2c TV decoder"); - -/* - The video mem address of the video card. - The driver has a little database for some videocards - to determine it from there. If your video card is not in there - you have either to give it to the driver as a parameter - or set in in a VIDIOCSFBUF ioctl - */ - -static unsigned long vidmem; /* default = 0 - Video memory base address */ -module_param(vidmem, ulong, 0444); -MODULE_PARM_DESC(vidmem, "Default video memory base address"); - -/* - Default input and video norm at startup of the driver. -*/ - -static unsigned int default_input; /* default 0 = Composite, 1 = S-Video */ -module_param(default_input, uint, 0444); -MODULE_PARM_DESC(default_input, - "Default input (0=Composite, 1=S-Video, 2=Internal)"); - -static int default_mux = 1; /* 6 Eyes input selection */ -module_param(default_mux, int, 0644); -MODULE_PARM_DESC(default_mux, - "Default 6 Eyes mux setting (Input selection)"); - -static int default_norm; /* default 0 = PAL, 1 = NTSC 2 = SECAM */ -module_param(default_norm, int, 0444); -MODULE_PARM_DESC(default_norm, "Default norm (0=PAL, 1=NTSC, 2=SECAM)"); - -/* /dev/videoN, -1 for autodetect */ -static int video_nr[BUZ_MAX] = {-1, -1, -1, -1}; -module_param_array(video_nr, int, NULL, 0444); -MODULE_PARM_DESC(video_nr, "video device number (-1=Auto)"); - -/* - Number and size of grab buffers for Video 4 Linux - The vast majority of applications should not need more than 2, - the very popular BTTV driver actually does ONLY have 2. - Time sensitive applications might need more, the maximum - is VIDEO_MAX_FRAME (defined in ). - - The size is set so that the maximum possible request - can be satisfied. Decrease it, if bigphys_area alloc'd - memory is low. If you don't have the bigphys_area patch, - set it to 128 KB. Will you allow only to grab small - images with V4L, but that's better than nothing. - - v4l_bufsize has to be given in KB ! - -*/ - -int v4l_nbufs = 2; -int v4l_bufsize = 128; /* Everybody should be able to work with this setting */ -module_param(v4l_nbufs, int, 0644); -MODULE_PARM_DESC(v4l_nbufs, "Maximum number of V4L buffers to use"); -module_param(v4l_bufsize, int, 0644); -MODULE_PARM_DESC(v4l_bufsize, "Maximum size per V4L buffer (in kB)"); - -int jpg_nbufs = 32; -int jpg_bufsize = 512; /* max size for 100% quality full-PAL frame */ -module_param(jpg_nbufs, int, 0644); -MODULE_PARM_DESC(jpg_nbufs, "Maximum number of JPG buffers to use"); -module_param(jpg_bufsize, int, 0644); -MODULE_PARM_DESC(jpg_bufsize, "Maximum size per JPG buffer (in kB)"); - -int pass_through = 0; /* 1=Pass through TV signal when device is not used */ - /* 0=Show color bar when device is not used (LML33: only if lml33dpath=1) */ -module_param(pass_through, int, 0644); -MODULE_PARM_DESC(pass_through, - "Pass TV signal through to TV-out when idling"); - -int zr36067_debug = 1; -module_param_named(debug, zr36067_debug, int, 0644); -MODULE_PARM_DESC(debug, "Debug level (0-5)"); - -MODULE_DESCRIPTION("Zoran-36057/36067 JPEG codec driver"); -MODULE_AUTHOR("Serguei Miridonov"); -MODULE_LICENSE("GPL"); - -static struct pci_device_id zr36067_pci_tbl[] = { - {PCI_VENDOR_ID_ZORAN, PCI_DEVICE_ID_ZORAN_36057, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, - {0} -}; -MODULE_DEVICE_TABLE(pci, zr36067_pci_tbl); - -int zoran_num; /* number of Buzs in use */ -struct zoran *zoran[BUZ_MAX]; - -/* videocodec bus functions ZR36060 */ -static u32 -zr36060_read (struct videocodec *codec, - u16 reg) -{ - struct zoran *zr = (struct zoran *) codec->master_data->data; - __u32 data; - - if (post_office_wait(zr) - || post_office_write(zr, 0, 1, reg >> 8) - || post_office_write(zr, 0, 2, reg & 0xff)) { - return -1; - } - - data = post_office_read(zr, 0, 3) & 0xff; - return data; -} - -static void -zr36060_write (struct videocodec *codec, - u16 reg, - u32 val) -{ - struct zoran *zr = (struct zoran *) codec->master_data->data; - - if (post_office_wait(zr) - || post_office_write(zr, 0, 1, reg >> 8) - || post_office_write(zr, 0, 2, reg & 0xff)) { - return; - } - - post_office_write(zr, 0, 3, val & 0xff); -} - -/* videocodec bus functions ZR36050 */ -static u32 -zr36050_read (struct videocodec *codec, - u16 reg) -{ - struct zoran *zr = (struct zoran *) codec->master_data->data; - __u32 data; - - if (post_office_wait(zr) - || post_office_write(zr, 1, 0, reg >> 2)) { // reg. HIGHBYTES - return -1; - } - - data = post_office_read(zr, 0, reg & 0x03) & 0xff; // reg. LOWBYTES + read - return data; -} - -static void -zr36050_write (struct videocodec *codec, - u16 reg, - u32 val) -{ - struct zoran *zr = (struct zoran *) codec->master_data->data; - - if (post_office_wait(zr) - || post_office_write(zr, 1, 0, reg >> 2)) { // reg. HIGHBYTES - return; - } - - post_office_write(zr, 0, reg & 0x03, val & 0xff); // reg. LOWBYTES + wr. data -} - -/* videocodec bus functions ZR36016 */ -static u32 -zr36016_read (struct videocodec *codec, - u16 reg) -{ - struct zoran *zr = (struct zoran *) codec->master_data->data; - __u32 data; - - if (post_office_wait(zr)) { - return -1; - } - - data = post_office_read(zr, 2, reg & 0x03) & 0xff; // read - return data; -} - -/* hack for in zoran_device.c */ -void -zr36016_write (struct videocodec *codec, - u16 reg, - u32 val) -{ - struct zoran *zr = (struct zoran *) codec->master_data->data; - - if (post_office_wait(zr)) { - return; - } - - post_office_write(zr, 2, reg & 0x03, val & 0x0ff); // wr. data -} - -/* - * Board specific information - */ - -static void -dc10_init (struct zoran *zr) -{ - dprintk(3, KERN_DEBUG "%s: dc10_init()\n", ZR_DEVNAME(zr)); - - /* Pixel clock selection */ - GPIO(zr, 4, 0); - GPIO(zr, 5, 1); - /* Enable the video bus sync signals */ - GPIO(zr, 7, 0); -} - -static void -dc10plus_init (struct zoran *zr) -{ - dprintk(3, KERN_DEBUG "%s: dc10plus_init()\n", ZR_DEVNAME(zr)); -} - -static void -buz_init (struct zoran *zr) -{ - dprintk(3, KERN_DEBUG "%s: buz_init()\n", ZR_DEVNAME(zr)); - - /* some stuff from Iomega */ - pci_write_config_dword(zr->pci_dev, 0xfc, 0x90680f15); - pci_write_config_dword(zr->pci_dev, 0x0c, 0x00012020); - pci_write_config_dword(zr->pci_dev, 0xe8, 0xc0200000); -} - -static void -lml33_init (struct zoran *zr) -{ - dprintk(3, KERN_DEBUG "%s: lml33_init()\n", ZR_DEVNAME(zr)); - - GPIO(zr, 2, 1); // Set Composite input/output -} - -static void -avs6eyes_init (struct zoran *zr) -{ - // AverMedia 6-Eyes original driver by Christer Weinigel - - // Lifted straight from Christer's old driver and - // modified slightly by Martin Samuelsson. - - int mux = default_mux; /* 1 = BT866, 7 = VID1 */ - - GPIO(zr, 4, 1); /* Bt866 SLEEP on */ - udelay(2); - - GPIO(zr, 0, 1); /* ZR36060 /RESET on */ - GPIO(zr, 1, 0); /* ZR36060 /SLEEP on */ - GPIO(zr, 2, mux & 1); /* MUX S0 */ - GPIO(zr, 3, 0); /* /FRAME on */ - GPIO(zr, 4, 0); /* Bt866 SLEEP off */ - GPIO(zr, 5, mux & 2); /* MUX S1 */ - GPIO(zr, 6, 0); /* ? */ - GPIO(zr, 7, mux & 4); /* MUX S2 */ - -} - -static char * -i2cid_to_modulename (u16 i2c_id) -{ - char *name = NULL; - - switch (i2c_id) { - case I2C_DRIVERID_SAA7110: - name = "saa7110"; - break; - case I2C_DRIVERID_SAA7111A: - name = "saa7111"; - break; - case I2C_DRIVERID_SAA7114: - name = "saa7114"; - break; - case I2C_DRIVERID_SAA7185B: - name = "saa7185"; - break; - case I2C_DRIVERID_ADV7170: - name = "adv7170"; - break; - case I2C_DRIVERID_ADV7175: - name = "adv7175"; - break; - case I2C_DRIVERID_BT819: - name = "bt819"; - break; - case I2C_DRIVERID_BT856: - name = "bt856"; - break; - case I2C_DRIVERID_BT866: - name = "bt866"; - break; - case I2C_DRIVERID_VPX3220: - name = "vpx3220"; - break; - case I2C_DRIVERID_KS0127: - name = "ks0127"; - break; - } - - return name; -} - -static char * -codecid_to_modulename (u16 codecid) -{ - char *name = NULL; - - switch (codecid) { - case CODEC_TYPE_ZR36060: - name = "zr36060"; - break; - case CODEC_TYPE_ZR36050: - name = "zr36050"; - break; - case CODEC_TYPE_ZR36016: - name = "zr36016"; - break; - } - - return name; -} - -// struct tvnorm { -// u16 Wt, Wa, HStart, HSyncStart, Ht, Ha, VStart; -// }; - -static struct tvnorm f50sqpixel = { 944, 768, 83, 880, 625, 576, 16 }; -static struct tvnorm f60sqpixel = { 780, 640, 51, 716, 525, 480, 12 }; -static struct tvnorm f50ccir601 = { 864, 720, 75, 804, 625, 576, 18 }; -static struct tvnorm f60ccir601 = { 858, 720, 57, 788, 525, 480, 16 }; - -static struct tvnorm f50ccir601_lml33 = { 864, 720, 75+34, 804, 625, 576, 18 }; -static struct tvnorm f60ccir601_lml33 = { 858, 720, 57+34, 788, 525, 480, 16 }; - -/* The DC10 (57/16/50) uses VActive as HSync, so HStart must be 0 */ -static struct tvnorm f50sqpixel_dc10 = { 944, 768, 0, 880, 625, 576, 0 }; -static struct tvnorm f60sqpixel_dc10 = { 780, 640, 0, 716, 525, 480, 12 }; - -/* FIXME: I cannot swap U and V in saa7114, so i do one - * pixel left shift in zoran (75 -> 74) - * (Maxim Yevtyushkin ) */ -static struct tvnorm f50ccir601_lm33r10 = { 864, 720, 74+54, 804, 625, 576, 18 }; -static struct tvnorm f60ccir601_lm33r10 = { 858, 720, 56+54, 788, 525, 480, 16 }; - -/* FIXME: The ks0127 seem incapable of swapping U and V, too, which is why I - * copy Maxim's left shift hack for the 6 Eyes. - * - * Christer's driver used the unshifted norms, though... - * /Sam */ -static struct tvnorm f50ccir601_avs6eyes = { 864, 720, 74, 804, 625, 576, 18 }; -static struct tvnorm f60ccir601_avs6eyes = { 858, 720, 56, 788, 525, 480, 16 }; - -static struct card_info zoran_cards[NUM_CARDS] __devinitdata = { - { - .type = DC10_old, - .name = "DC10(old)", - .i2c_decoder = I2C_DRIVERID_VPX3220, - .video_codec = CODEC_TYPE_ZR36050, - .video_vfe = CODEC_TYPE_ZR36016, - - .inputs = 3, - .input = { - { 1, "Composite" }, - { 2, "S-Video" }, - { 0, "Internal/comp" } - }, - .norms = 3, - .tvn = { - &f50sqpixel_dc10, - &f60sqpixel_dc10, - &f50sqpixel_dc10 - }, - .jpeg_int = 0, - .vsync_int = ZR36057_ISR_GIRQ1, - .gpio = { 2, 1, -1, 3, 7, 0, 4, 5 }, - .gpio_pol = { 0, 0, 0, 1, 0, 0, 0, 0 }, - .gpcs = { -1, 0 }, - .vfe_pol = { 0, 0, 0, 0, 0, 0, 0, 0 }, - .gws_not_connected = 0, - .input_mux = 0, - .init = &dc10_init, - }, { - .type = DC10_new, - .name = "DC10(new)", - .i2c_decoder = I2C_DRIVERID_SAA7110, - .i2c_encoder = I2C_DRIVERID_ADV7175, - .video_codec = CODEC_TYPE_ZR36060, - - .inputs = 3, - .input = { - { 0, "Composite" }, - { 7, "S-Video" }, - { 5, "Internal/comp" } - }, - .norms = 3, - .tvn = { - &f50sqpixel, - &f60sqpixel, - &f50sqpixel}, - .jpeg_int = ZR36057_ISR_GIRQ0, - .vsync_int = ZR36057_ISR_GIRQ1, - .gpio = { 3, 0, 6, 1, 2, -1, 4, 5 }, - .gpio_pol = { 0, 0, 0, 0, 0, 0, 0, 0 }, - .gpcs = { -1, 1}, - .vfe_pol = { 1, 1, 1, 1, 0, 0, 0, 0 }, - .gws_not_connected = 0, - .input_mux = 0, - .init = &dc10plus_init, - }, { - .type = DC10plus, - .name = "DC10plus", - .vendor_id = PCI_VENDOR_ID_MIRO, - .device_id = PCI_DEVICE_ID_MIRO_DC10PLUS, - .i2c_decoder = I2C_DRIVERID_SAA7110, - .i2c_encoder = I2C_DRIVERID_ADV7175, - .video_codec = CODEC_TYPE_ZR36060, - - .inputs = 3, - .input = { - { 0, "Composite" }, - { 7, "S-Video" }, - { 5, "Internal/comp" } - }, - .norms = 3, - .tvn = { - &f50sqpixel, - &f60sqpixel, - &f50sqpixel - }, - .jpeg_int = ZR36057_ISR_GIRQ0, - .vsync_int = ZR36057_ISR_GIRQ1, - .gpio = { 3, 0, 6, 1, 2, -1, 4, 5 }, - .gpio_pol = { 0, 0, 0, 0, 0, 0, 0, 0 }, - .gpcs = { -1, 1 }, - .vfe_pol = { 1, 1, 1, 1, 0, 0, 0, 0 }, - .gws_not_connected = 0, - .input_mux = 0, - .init = &dc10plus_init, - }, { - .type = DC30, - .name = "DC30", - .i2c_decoder = I2C_DRIVERID_VPX3220, - .i2c_encoder = I2C_DRIVERID_ADV7175, - .video_codec = CODEC_TYPE_ZR36050, - .video_vfe = CODEC_TYPE_ZR36016, - - .inputs = 3, - .input = { - { 1, "Composite" }, - { 2, "S-Video" }, - { 0, "Internal/comp" } - }, - .norms = 3, - .tvn = { - &f50sqpixel_dc10, - &f60sqpixel_dc10, - &f50sqpixel_dc10 - }, - .jpeg_int = 0, - .vsync_int = ZR36057_ISR_GIRQ1, - .gpio = { 2, 1, -1, 3, 7, 0, 4, 5 }, - .gpio_pol = { 0, 0, 0, 1, 0, 0, 0, 0 }, - .gpcs = { -1, 0 }, - .vfe_pol = { 0, 0, 0, 0, 0, 0, 0, 0 }, - .gws_not_connected = 0, - .input_mux = 0, - .init = &dc10_init, - }, { - .type = DC30plus, - .name = "DC30plus", - .vendor_id = PCI_VENDOR_ID_MIRO, - .device_id = PCI_DEVICE_ID_MIRO_DC30PLUS, - .i2c_decoder = I2C_DRIVERID_VPX3220, - .i2c_encoder = I2C_DRIVERID_ADV7175, - .video_codec = CODEC_TYPE_ZR36050, - .video_vfe = CODEC_TYPE_ZR36016, - - .inputs = 3, - .input = { - { 1, "Composite" }, - { 2, "S-Video" }, - { 0, "Internal/comp" } - }, - .norms = 3, - .tvn = { - &f50sqpixel_dc10, - &f60sqpixel_dc10, - &f50sqpixel_dc10 - }, - .jpeg_int = 0, - .vsync_int = ZR36057_ISR_GIRQ1, - .gpio = { 2, 1, -1, 3, 7, 0, 4, 5 }, - .gpio_pol = { 0, 0, 0, 1, 0, 0, 0, 0 }, - .gpcs = { -1, 0 }, - .vfe_pol = { 0, 0, 0, 0, 0, 0, 0, 0 }, - .gws_not_connected = 0, - .input_mux = 0, - .init = &dc10_init, - }, { - .type = LML33, - .name = "LML33", - .i2c_decoder = I2C_DRIVERID_BT819, - .i2c_encoder = I2C_DRIVERID_BT856, - .video_codec = CODEC_TYPE_ZR36060, - - .inputs = 2, - .input = { - { 0, "Composite" }, - { 7, "S-Video" } - }, - .norms = 2, - .tvn = { - &f50ccir601_lml33, - &f60ccir601_lml33, - NULL - }, - .jpeg_int = ZR36057_ISR_GIRQ1, - .vsync_int = ZR36057_ISR_GIRQ0, - .gpio = { 1, -1, 3, 5, 7, -1, -1, -1 }, - .gpio_pol = { 0, 0, 0, 0, 1, 0, 0, 0 }, - .gpcs = { 3, 1 }, - .vfe_pol = { 1, 1, 0, 0, 0, 1, 0, 0 }, - .gws_not_connected = 1, - .input_mux = 0, - .init = &lml33_init, - }, { - .type = LML33R10, - .name = "LML33R10", - .vendor_id = PCI_VENDOR_ID_ELECTRONICDESIGNGMBH, - .device_id = PCI_DEVICE_ID_LML_33R10, - .i2c_decoder = I2C_DRIVERID_SAA7114, - .i2c_encoder = I2C_DRIVERID_ADV7170, - .video_codec = CODEC_TYPE_ZR36060, - - .inputs = 2, - .input = { - { 0, "Composite" }, - { 7, "S-Video" } - }, - .norms = 2, - .tvn = { - &f50ccir601_lm33r10, - &f60ccir601_lm33r10, - NULL - }, - .jpeg_int = ZR36057_ISR_GIRQ1, - .vsync_int = ZR36057_ISR_GIRQ0, - .gpio = { 1, -1, 3, 5, 7, -1, -1, -1 }, - .gpio_pol = { 0, 0, 0, 0, 1, 0, 0, 0 }, - .gpcs = { 3, 1 }, - .vfe_pol = { 1, 1, 0, 0, 0, 1, 0, 0 }, - .gws_not_connected = 1, - .input_mux = 0, - .init = &lml33_init, - }, { - .type = BUZ, - .name = "Buz", - .vendor_id = PCI_VENDOR_ID_IOMEGA, - .device_id = PCI_DEVICE_ID_IOMEGA_BUZ, - .i2c_decoder = I2C_DRIVERID_SAA7111A, - .i2c_encoder = I2C_DRIVERID_SAA7185B, - .video_codec = CODEC_TYPE_ZR36060, - - .inputs = 2, - .input = { - { 3, "Composite" }, - { 7, "S-Video" } - }, - .norms = 3, - .tvn = { - &f50ccir601, - &f60ccir601, - &f50ccir601 - }, - .jpeg_int = ZR36057_ISR_GIRQ1, - .vsync_int = ZR36057_ISR_GIRQ0, - .gpio = { 1, -1, 3, -1, -1, -1, -1, -1 }, - .gpio_pol = { 0, 0, 0, 0, 0, 0, 0, 0 }, - .gpcs = { 3, 1 }, - .vfe_pol = { 1, 1, 0, 0, 0, 1, 0, 0 }, - .gws_not_connected = 1, - .input_mux = 0, - .init = &buz_init, - }, { - .type = AVS6EYES, - .name = "6-Eyes", - /* AverMedia chose not to brand the 6-Eyes. Thus it - can't be autodetected, and requires card=x. */ - .vendor_id = -1, - .device_id = -1, - .i2c_decoder = I2C_DRIVERID_KS0127, - .i2c_encoder = I2C_DRIVERID_BT866, - .video_codec = CODEC_TYPE_ZR36060, - - .inputs = 10, - .input = { - { 0, "Composite 1" }, - { 1, "Composite 2" }, - { 2, "Composite 3" }, - { 4, "Composite 4" }, - { 5, "Composite 5" }, - { 6, "Composite 6" }, - { 8, "S-Video 1" }, - { 9, "S-Video 2" }, - {10, "S-Video 3" }, - {15, "YCbCr" } - }, - .norms = 2, - .tvn = { - &f50ccir601_avs6eyes, - &f60ccir601_avs6eyes, - NULL - }, - .jpeg_int = ZR36057_ISR_GIRQ1, - .vsync_int = ZR36057_ISR_GIRQ0, - .gpio = { 1, 0, 3, -1, -1, -1, -1, -1 },// Validity unknown /Sam - .gpio_pol = { 0, 0, 0, 0, 0, 0, 0, 0 }, // Validity unknown /Sam - .gpcs = { 3, 1 }, // Validity unknown /Sam - .vfe_pol = { 1, 0, 0, 0, 0, 1, 0, 0 }, // Validity unknown /Sam - .gws_not_connected = 1, - .input_mux = 1, - .init = &avs6eyes_init, - } - -}; - -/* - * I2C functions - */ -/* software I2C functions */ -static int -zoran_i2c_getsda (void *data) -{ - struct zoran *zr = (struct zoran *) data; - - return (btread(ZR36057_I2CBR) >> 1) & 1; -} - -static int -zoran_i2c_getscl (void *data) -{ - struct zoran *zr = (struct zoran *) data; - - return btread(ZR36057_I2CBR) & 1; -} - -static void -zoran_i2c_setsda (void *data, - int state) -{ - struct zoran *zr = (struct zoran *) data; - - if (state) - zr->i2cbr |= 2; - else - zr->i2cbr &= ~2; - btwrite(zr->i2cbr, ZR36057_I2CBR); -} - -static void -zoran_i2c_setscl (void *data, - int state) -{ - struct zoran *zr = (struct zoran *) data; - - if (state) - zr->i2cbr |= 1; - else - zr->i2cbr &= ~1; - btwrite(zr->i2cbr, ZR36057_I2CBR); -} - -static int -zoran_i2c_client_register (struct i2c_client *client) -{ - struct zoran *zr = (struct zoran *) i2c_get_adapdata(client->adapter); - int res = 0; - - dprintk(2, - KERN_DEBUG "%s: i2c_client_register() - driver id = %d\n", - ZR_DEVNAME(zr), client->driver->id); - - mutex_lock(&zr->resource_lock); - - if (zr->user > 0) { - /* we're already busy, so we keep a reference to - * them... Could do a lot of stuff here, but this - * is easiest. (Did I ever mention I'm a lazy ass?) - */ - res = -EBUSY; - goto clientreg_unlock_and_return; - } - - if (client->driver->id == zr->card.i2c_decoder) - zr->decoder = client; - else if (client->driver->id == zr->card.i2c_encoder) - zr->encoder = client; - else { - res = -ENODEV; - goto clientreg_unlock_and_return; - } - -clientreg_unlock_and_return: - mutex_unlock(&zr->resource_lock); - - return res; -} - -static int -zoran_i2c_client_unregister (struct i2c_client *client) -{ - struct zoran *zr = (struct zoran *) i2c_get_adapdata(client->adapter); - int res = 0; - - dprintk(2, KERN_DEBUG "%s: i2c_client_unregister()\n", ZR_DEVNAME(zr)); - - mutex_lock(&zr->resource_lock); - - if (zr->user > 0) { - res = -EBUSY; - goto clientunreg_unlock_and_return; - } - - /* try to locate it */ - if (client == zr->encoder) { - zr->encoder = NULL; - } else if (client == zr->decoder) { - zr->decoder = NULL; - snprintf(ZR_DEVNAME(zr), sizeof(ZR_DEVNAME(zr)), "MJPEG[%d]", zr->id); - } -clientunreg_unlock_and_return: - mutex_unlock(&zr->resource_lock); - return res; -} - -static const struct i2c_algo_bit_data zoran_i2c_bit_data_template = { - .setsda = zoran_i2c_setsda, - .setscl = zoran_i2c_setscl, - .getsda = zoran_i2c_getsda, - .getscl = zoran_i2c_getscl, - .udelay = 10, - .timeout = 100, -}; - -static int -zoran_register_i2c (struct zoran *zr) -{ - memcpy(&zr->i2c_algo, &zoran_i2c_bit_data_template, - sizeof(struct i2c_algo_bit_data)); - zr->i2c_algo.data = zr; - zr->i2c_adapter.id = I2C_HW_B_ZR36067; - zr->i2c_adapter.client_register = zoran_i2c_client_register; - zr->i2c_adapter.client_unregister = zoran_i2c_client_unregister; - strlcpy(zr->i2c_adapter.name, ZR_DEVNAME(zr), - sizeof(zr->i2c_adapter.name)); - i2c_set_adapdata(&zr->i2c_adapter, zr); - zr->i2c_adapter.algo_data = &zr->i2c_algo; - zr->i2c_adapter.dev.parent = &zr->pci_dev->dev; - return i2c_bit_add_bus(&zr->i2c_adapter); -} - -static void -zoran_unregister_i2c (struct zoran *zr) -{ - i2c_del_adapter(&zr->i2c_adapter); -} - -/* Check a zoran_params struct for correctness, insert default params */ - -int -zoran_check_jpg_settings (struct zoran *zr, - struct zoran_jpg_settings *settings) -{ - int err = 0, err0 = 0; - - dprintk(4, - KERN_DEBUG - "%s: check_jpg_settings() - dec: %d, Hdcm: %d, Vdcm: %d, Tdcm: %d\n", - ZR_DEVNAME(zr), settings->decimation, settings->HorDcm, - settings->VerDcm, settings->TmpDcm); - dprintk(4, - KERN_DEBUG - "%s: check_jpg_settings() - x: %d, y: %d, w: %d, y: %d\n", - ZR_DEVNAME(zr), settings->img_x, settings->img_y, - settings->img_width, settings->img_height); - /* Check decimation, set default values for decimation = 1, 2, 4 */ - switch (settings->decimation) { - case 1: - - settings->HorDcm = 1; - settings->VerDcm = 1; - settings->TmpDcm = 1; - settings->field_per_buff = 2; - settings->img_x = 0; - settings->img_y = 0; - settings->img_width = BUZ_MAX_WIDTH; - settings->img_height = BUZ_MAX_HEIGHT / 2; - break; - case 2: - - settings->HorDcm = 2; - settings->VerDcm = 1; - settings->TmpDcm = 2; - settings->field_per_buff = 1; - settings->img_x = (BUZ_MAX_WIDTH == 720) ? 8 : 0; - settings->img_y = 0; - settings->img_width = - (BUZ_MAX_WIDTH == 720) ? 704 : BUZ_MAX_WIDTH; - settings->img_height = BUZ_MAX_HEIGHT / 2; - break; - case 4: - - if (zr->card.type == DC10_new) { - dprintk(1, - KERN_DEBUG - "%s: check_jpg_settings() - HDec by 4 is not supported on the DC10\n", - ZR_DEVNAME(zr)); - err0++; - break; - } - - settings->HorDcm = 4; - settings->VerDcm = 2; - settings->TmpDcm = 2; - settings->field_per_buff = 1; - settings->img_x = (BUZ_MAX_WIDTH == 720) ? 8 : 0; - settings->img_y = 0; - settings->img_width = - (BUZ_MAX_WIDTH == 720) ? 704 : BUZ_MAX_WIDTH; - settings->img_height = BUZ_MAX_HEIGHT / 2; - break; - case 0: - - /* We have to check the data the user has set */ - - if (settings->HorDcm != 1 && settings->HorDcm != 2 && - (zr->card.type == DC10_new || settings->HorDcm != 4)) - err0++; - if (settings->VerDcm != 1 && settings->VerDcm != 2) - err0++; - if (settings->TmpDcm != 1 && settings->TmpDcm != 2) - err0++; - if (settings->field_per_buff != 1 && - settings->field_per_buff != 2) - err0++; - if (settings->img_x < 0) - err0++; - if (settings->img_y < 0) - err0++; - if (settings->img_width < 0) - err0++; - if (settings->img_height < 0) - err0++; - if (settings->img_x + settings->img_width > BUZ_MAX_WIDTH) - err0++; - if (settings->img_y + settings->img_height > - BUZ_MAX_HEIGHT / 2) - err0++; - if (settings->HorDcm && settings->VerDcm) { - if (settings->img_width % - (16 * settings->HorDcm) != 0) - err0++; - if (settings->img_height % - (8 * settings->VerDcm) != 0) - err0++; - } - - if (err0) { - dprintk(1, - KERN_ERR - "%s: check_jpg_settings() - error in params for decimation = 0\n", - ZR_DEVNAME(zr)); - err++; - } - break; - default: - dprintk(1, - KERN_ERR - "%s: check_jpg_settings() - decimation = %d, must be 0, 1, 2 or 4\n", - ZR_DEVNAME(zr), settings->decimation); - err++; - break; - } - - if (settings->jpg_comp.quality > 100) - settings->jpg_comp.quality = 100; - if (settings->jpg_comp.quality < 5) - settings->jpg_comp.quality = 5; - if (settings->jpg_comp.APPn < 0) - settings->jpg_comp.APPn = 0; - if (settings->jpg_comp.APPn > 15) - settings->jpg_comp.APPn = 15; - if (settings->jpg_comp.APP_len < 0) - settings->jpg_comp.APP_len = 0; - if (settings->jpg_comp.APP_len > 60) - settings->jpg_comp.APP_len = 60; - if (settings->jpg_comp.COM_len < 0) - settings->jpg_comp.COM_len = 0; - if (settings->jpg_comp.COM_len > 60) - settings->jpg_comp.COM_len = 60; - if (err) - return -EINVAL; - return 0; -} - -void -zoran_open_init_params (struct zoran *zr) -{ - int i; - - /* User must explicitly set a window */ - zr->overlay_settings.is_set = 0; - zr->overlay_mask = NULL; - zr->overlay_active = ZORAN_FREE; - - zr->v4l_memgrab_active = 0; - zr->v4l_overlay_active = 0; - zr->v4l_grab_frame = NO_GRAB_ACTIVE; - zr->v4l_grab_seq = 0; - zr->v4l_settings.width = 192; - zr->v4l_settings.height = 144; - zr->v4l_settings.format = &zoran_formats[7]; /* YUY2 - YUV-4:2:2 packed */ - zr->v4l_settings.bytesperline = - zr->v4l_settings.width * - ((zr->v4l_settings.format->depth + 7) / 8); - - /* DMA ring stuff for V4L */ - zr->v4l_pend_tail = 0; - zr->v4l_pend_head = 0; - zr->v4l_sync_tail = 0; - zr->v4l_buffers.active = ZORAN_FREE; - for (i = 0; i < VIDEO_MAX_FRAME; i++) { - zr->v4l_buffers.buffer[i].state = BUZ_STATE_USER; /* nothing going on */ - } - zr->v4l_buffers.allocated = 0; - - for (i = 0; i < BUZ_MAX_FRAME; i++) { - zr->jpg_buffers.buffer[i].state = BUZ_STATE_USER; /* nothing going on */ - } - zr->jpg_buffers.active = ZORAN_FREE; - zr->jpg_buffers.allocated = 0; - /* Set necessary params and call zoran_check_jpg_settings to set the defaults */ - zr->jpg_settings.decimation = 1; - zr->jpg_settings.jpg_comp.quality = 50; /* default compression factor 8 */ - if (zr->card.type != BUZ) - zr->jpg_settings.odd_even = 1; - else - zr->jpg_settings.odd_even = 0; - zr->jpg_settings.jpg_comp.APPn = 0; - zr->jpg_settings.jpg_comp.APP_len = 0; /* No APPn marker */ - memset(zr->jpg_settings.jpg_comp.APP_data, 0, - sizeof(zr->jpg_settings.jpg_comp.APP_data)); - zr->jpg_settings.jpg_comp.COM_len = 0; /* No COM marker */ - memset(zr->jpg_settings.jpg_comp.COM_data, 0, - sizeof(zr->jpg_settings.jpg_comp.COM_data)); - zr->jpg_settings.jpg_comp.jpeg_markers = - JPEG_MARKER_DHT | JPEG_MARKER_DQT; - i = zoran_check_jpg_settings(zr, &zr->jpg_settings); - if (i) - dprintk(1, - KERN_ERR - "%s: zoran_open_init_params() internal error\n", - ZR_DEVNAME(zr)); - - clear_interrupt_counters(zr); - zr->testing = 0; -} - -static void __devinit -test_interrupts (struct zoran *zr) -{ - DEFINE_WAIT(wait); - int timeout, icr; - - clear_interrupt_counters(zr); - - zr->testing = 1; - icr = btread(ZR36057_ICR); - btwrite(0x78000000 | ZR36057_ICR_IntPinEn, ZR36057_ICR); - prepare_to_wait(&zr->test_q, &wait, TASK_INTERRUPTIBLE); - timeout = schedule_timeout(HZ); - finish_wait(&zr->test_q, &wait); - btwrite(0, ZR36057_ICR); - btwrite(0x78000000, ZR36057_ISR); - zr->testing = 0; - dprintk(5, KERN_INFO "%s: Testing interrupts...\n", ZR_DEVNAME(zr)); - if (timeout) { - dprintk(1, ": time spent: %d\n", 1 * HZ - timeout); - } - if (zr36067_debug > 1) - print_interrupts(zr); - btwrite(icr, ZR36057_ICR); -} - -static int __devinit -zr36057_init (struct zoran *zr) -{ - int j, err; - int two = 2; - int zero = 0; - - dprintk(1, - KERN_INFO - "%s: zr36057_init() - initializing card[%d], zr=%p\n", - ZR_DEVNAME(zr), zr->id, zr); - - /* default setup of all parameters which will persist between opens */ - zr->user = 0; - - init_waitqueue_head(&zr->v4l_capq); - init_waitqueue_head(&zr->jpg_capq); - init_waitqueue_head(&zr->test_q); - zr->jpg_buffers.allocated = 0; - zr->v4l_buffers.allocated = 0; - - zr->buffer.base = (void *) vidmem; - zr->buffer.width = 0; - zr->buffer.height = 0; - zr->buffer.depth = 0; - zr->buffer.bytesperline = 0; - - /* Avoid nonsense settings from user for default input/norm */ - if (default_norm < VIDEO_MODE_PAL && - default_norm > VIDEO_MODE_SECAM) - default_norm = VIDEO_MODE_PAL; - zr->norm = default_norm; - if (!(zr->timing = zr->card.tvn[zr->norm])) { - dprintk(1, - KERN_WARNING - "%s: zr36057_init() - default TV standard not supported by hardware. PAL will be used.\n", - ZR_DEVNAME(zr)); - zr->norm = VIDEO_MODE_PAL; - zr->timing = zr->card.tvn[zr->norm]; - } - - if (default_input > zr->card.inputs-1) { - dprintk(1, - KERN_WARNING - "%s: default_input value %d out of range (0-%d)\n", - ZR_DEVNAME(zr), default_input, zr->card.inputs-1); - default_input = 0; - } - zr->input = default_input; - - /* Should the following be reset at every open ? */ - zr->hue = 32768; - zr->contrast = 32768; - zr->saturation = 32768; - zr->brightness = 32768; - - /* default setup (will be repeated at every open) */ - zoran_open_init_params(zr); - - /* allocate memory *before* doing anything to the hardware - * in case allocation fails */ - zr->stat_com = kzalloc(BUZ_NUM_STAT_COM * 4, GFP_KERNEL); - zr->video_dev = kmalloc(sizeof(struct video_device), GFP_KERNEL); - if (!zr->stat_com || !zr->video_dev) { - dprintk(1, - KERN_ERR - "%s: zr36057_init() - kmalloc (STAT_COM) failed\n", - ZR_DEVNAME(zr)); - err = -ENOMEM; - goto exit_free; - } - for (j = 0; j < BUZ_NUM_STAT_COM; j++) { - zr->stat_com[j] = cpu_to_le32(1); /* mark as unavailable to zr36057 */ - } - - /* - * Now add the template and register the device unit. - */ - memcpy(zr->video_dev, &zoran_template, sizeof(zoran_template)); - strcpy(zr->video_dev->name, ZR_DEVNAME(zr)); - err = video_register_device(zr->video_dev, VFL_TYPE_GRABBER, video_nr[zr->id]); - if (err < 0) - goto exit_unregister; - - zoran_init_hardware(zr); - if (zr36067_debug > 2) - detect_guest_activity(zr); - test_interrupts(zr); - if (!pass_through) { - decoder_command(zr, DECODER_ENABLE_OUTPUT, &zero); - encoder_command(zr, ENCODER_SET_INPUT, &two); - } - - zr->zoran_proc = NULL; - zr->initialized = 1; - return 0; - -exit_unregister: - zoran_unregister_i2c(zr); -exit_free: - kfree(zr->stat_com); - kfree(zr->video_dev); - return err; -} - -static void -zoran_release (struct zoran *zr) -{ - if (!zr->initialized) - goto exit_free; - /* unregister videocodec bus */ - if (zr->codec) { - struct videocodec_master *master = zr->codec->master_data; - - videocodec_detach(zr->codec); - kfree(master); - } - if (zr->vfe) { - struct videocodec_master *master = zr->vfe->master_data; - - videocodec_detach(zr->vfe); - kfree(master); - } - - /* unregister i2c bus */ - zoran_unregister_i2c(zr); - /* disable PCI bus-mastering */ - zoran_set_pci_master(zr, 0); - /* put chip into reset */ - btwrite(0, ZR36057_SPGPPCR); - free_irq(zr->pci_dev->irq, zr); - /* unmap and free memory */ - kfree(zr->stat_com); - zoran_proc_cleanup(zr); - iounmap(zr->zr36057_mem); - pci_disable_device(zr->pci_dev); - video_unregister_device(zr->video_dev); -exit_free: - kfree(zr); -} - -void -zoran_vdev_release (struct video_device *vdev) -{ - kfree(vdev); -} - -static struct videocodec_master * __devinit -zoran_setup_videocodec (struct zoran *zr, - int type) -{ - struct videocodec_master *m = NULL; - - m = kmalloc(sizeof(struct videocodec_master), GFP_KERNEL); - if (!m) { - dprintk(1, - KERN_ERR - "%s: zoran_setup_videocodec() - no memory\n", - ZR_DEVNAME(zr)); - return m; - } - - /* magic and type are unused for master struct. Makes sense only at - codec structs. - In the past, .type were initialized to the old V4L1 .hardware - value, as VID_HARDWARE_ZR36067 - */ - m->magic = 0L; - m->type = 0; - - m->flags = CODEC_FLAG_ENCODER | CODEC_FLAG_DECODER; - strncpy(m->name, ZR_DEVNAME(zr), sizeof(m->name)); - m->data = zr; - - switch (type) - { - case CODEC_TYPE_ZR36060: - m->readreg = zr36060_read; - m->writereg = zr36060_write; - m->flags |= CODEC_FLAG_JPEG | CODEC_FLAG_VFE; - break; - case CODEC_TYPE_ZR36050: - m->readreg = zr36050_read; - m->writereg = zr36050_write; - m->flags |= CODEC_FLAG_JPEG; - break; - case CODEC_TYPE_ZR36016: - m->readreg = zr36016_read; - m->writereg = zr36016_write; - m->flags |= CODEC_FLAG_VFE; - break; - } - - return m; -} - -/* - * Scan for a Buz card (actually for the PCI controller ZR36057), - * request the irq and map the io memory - */ -static int __devinit -find_zr36057 (void) -{ - unsigned char latency, need_latency; - struct zoran *zr; - struct pci_dev *dev = NULL; - int result; - struct videocodec_master *master_vfe = NULL; - struct videocodec_master *master_codec = NULL; - int card_num; - char *i2c_enc_name, *i2c_dec_name, *codec_name, *vfe_name; - - zoran_num = 0; - while (zoran_num < BUZ_MAX && - (dev = pci_get_device(PCI_VENDOR_ID_ZORAN, PCI_DEVICE_ID_ZORAN_36057, dev)) != NULL) { - card_num = card[zoran_num]; - zr = kzalloc(sizeof(struct zoran), GFP_KERNEL); - if (!zr) { - dprintk(1, - KERN_ERR - "%s: find_zr36057() - kzalloc failed\n", - ZORAN_NAME); - continue; - } - zr->pci_dev = dev; - //zr->zr36057_mem = NULL; - zr->id = zoran_num; - snprintf(ZR_DEVNAME(zr), sizeof(ZR_DEVNAME(zr)), "MJPEG[%u]", zr->id); - spin_lock_init(&zr->spinlock); - mutex_init(&zr->resource_lock); - if (pci_enable_device(dev)) - goto zr_free_mem; - zr->zr36057_adr = pci_resource_start(zr->pci_dev, 0); - pci_read_config_byte(zr->pci_dev, PCI_CLASS_REVISION, - &zr->revision); - if (zr->revision < 2) { - dprintk(1, - KERN_INFO - "%s: Zoran ZR36057 (rev %d) irq: %d, memory: 0x%08x.\n", - ZR_DEVNAME(zr), zr->revision, zr->pci_dev->irq, - zr->zr36057_adr); - - if (card_num == -1) { - dprintk(1, - KERN_ERR - "%s: find_zr36057() - no card specified, please use the card=X insmod option\n", - ZR_DEVNAME(zr)); - goto zr_free_mem; - } - } else { - int i; - unsigned short ss_vendor, ss_device; - - ss_vendor = zr->pci_dev->subsystem_vendor; - ss_device = zr->pci_dev->subsystem_device; - dprintk(1, - KERN_INFO - "%s: Zoran ZR36067 (rev %d) irq: %d, memory: 0x%08x\n", - ZR_DEVNAME(zr), zr->revision, zr->pci_dev->irq, - zr->zr36057_adr); - dprintk(1, - KERN_INFO - "%s: subsystem vendor=0x%04x id=0x%04x\n", - ZR_DEVNAME(zr), ss_vendor, ss_device); - if (card_num == -1) { - dprintk(3, - KERN_DEBUG - "%s: find_zr36057() - trying to autodetect card type\n", - ZR_DEVNAME(zr)); - for (i=0;i= NUM_CARDS) { - dprintk(2, - KERN_ERR - "%s: find_zr36057() - invalid cardnum %d\n", - ZR_DEVNAME(zr), card_num); - goto zr_free_mem; - } - - /* even though we make this a non pointer and thus - * theoretically allow for making changes to this struct - * on a per-individual card basis at runtime, this is - * strongly discouraged. This structure is intended to - * keep general card information, no settings or anything */ - zr->card = zoran_cards[card_num]; - snprintf(ZR_DEVNAME(zr), sizeof(ZR_DEVNAME(zr)), - "%s[%u]", zr->card.name, zr->id); - - zr->zr36057_mem = ioremap_nocache(zr->zr36057_adr, 0x1000); - if (!zr->zr36057_mem) { - dprintk(1, - KERN_ERR - "%s: find_zr36057() - ioremap failed\n", - ZR_DEVNAME(zr)); - goto zr_free_mem; - } - - result = request_irq(zr->pci_dev->irq, - zoran_irq, - IRQF_SHARED | IRQF_DISABLED, - ZR_DEVNAME(zr), - (void *) zr); - if (result < 0) { - if (result == -EINVAL) { - dprintk(1, - KERN_ERR - "%s: find_zr36057() - bad irq number or handler\n", - ZR_DEVNAME(zr)); - } else if (result == -EBUSY) { - dprintk(1, - KERN_ERR - "%s: find_zr36057() - IRQ %d busy, change your PnP config in BIOS\n", - ZR_DEVNAME(zr), zr->pci_dev->irq); - } else { - dprintk(1, - KERN_ERR - "%s: find_zr36057() - can't assign irq, error code %d\n", - ZR_DEVNAME(zr), result); - } - goto zr_unmap; - } - - /* set PCI latency timer */ - pci_read_config_byte(zr->pci_dev, PCI_LATENCY_TIMER, - &latency); - need_latency = zr->revision > 1 ? 32 : 48; - if (latency != need_latency) { - dprintk(2, - KERN_INFO - "%s: Changing PCI latency from %d to %d.\n", - ZR_DEVNAME(zr), latency, need_latency); - pci_write_config_byte(zr->pci_dev, - PCI_LATENCY_TIMER, - need_latency); - } - - zr36057_restart(zr); - /* i2c */ - dprintk(2, KERN_INFO "%s: Initializing i2c bus...\n", - ZR_DEVNAME(zr)); - - /* i2c decoder */ - if (decoder[zr->id] != -1) { - i2c_dec_name = i2cid_to_modulename(decoder[zr->id]); - zr->card.i2c_decoder = decoder[zr->id]; - } else if (zr->card.i2c_decoder != 0) { - i2c_dec_name = - i2cid_to_modulename(zr->card.i2c_decoder); - } else { - i2c_dec_name = NULL; - } - - if (i2c_dec_name) { - if ((result = request_module(i2c_dec_name)) < 0) { - dprintk(1, - KERN_ERR - "%s: failed to load module %s: %d\n", - ZR_DEVNAME(zr), i2c_dec_name, result); - } - } - - /* i2c encoder */ - if (encoder[zr->id] != -1) { - i2c_enc_name = i2cid_to_modulename(encoder[zr->id]); - zr->card.i2c_encoder = encoder[zr->id]; - } else if (zr->card.i2c_encoder != 0) { - i2c_enc_name = - i2cid_to_modulename(zr->card.i2c_encoder); - } else { - i2c_enc_name = NULL; - } - - if (i2c_enc_name) { - if ((result = request_module(i2c_enc_name)) < 0) { - dprintk(1, - KERN_ERR - "%s: failed to load module %s: %d\n", - ZR_DEVNAME(zr), i2c_enc_name, result); - } - } - - if (zoran_register_i2c(zr) < 0) { - dprintk(1, - KERN_ERR - "%s: find_zr36057() - can't initialize i2c bus\n", - ZR_DEVNAME(zr)); - goto zr_free_irq; - } - - dprintk(2, - KERN_INFO "%s: Initializing videocodec bus...\n", - ZR_DEVNAME(zr)); - - if (zr->card.video_codec != 0 && - (codec_name = - codecid_to_modulename(zr->card.video_codec)) != NULL) { - if ((result = request_module(codec_name)) < 0) { - dprintk(1, - KERN_ERR - "%s: failed to load modules %s: %d\n", - ZR_DEVNAME(zr), codec_name, result); - } - } - if (zr->card.video_vfe != 0 && - (vfe_name = - codecid_to_modulename(zr->card.video_vfe)) != NULL) { - if ((result = request_module(vfe_name)) < 0) { - dprintk(1, - KERN_ERR - "%s: failed to load modules %s: %d\n", - ZR_DEVNAME(zr), vfe_name, result); - } - } - - /* reset JPEG codec */ - jpeg_codec_sleep(zr, 1); - jpeg_codec_reset(zr); - /* video bus enabled */ - /* display codec revision */ - if (zr->card.video_codec != 0) { - master_codec = zoran_setup_videocodec(zr, - zr->card.video_codec); - if (!master_codec) - goto zr_unreg_i2c; - zr->codec = videocodec_attach(master_codec); - if (!zr->codec) { - dprintk(1, - KERN_ERR - "%s: find_zr36057() - no codec found\n", - ZR_DEVNAME(zr)); - goto zr_free_codec; - } - if (zr->codec->type != zr->card.video_codec) { - dprintk(1, - KERN_ERR - "%s: find_zr36057() - wrong codec\n", - ZR_DEVNAME(zr)); - goto zr_detach_codec; - } - } - if (zr->card.video_vfe != 0) { - master_vfe = zoran_setup_videocodec(zr, - zr->card.video_vfe); - if (!master_vfe) - goto zr_detach_codec; - zr->vfe = videocodec_attach(master_vfe); - if (!zr->vfe) { - dprintk(1, - KERN_ERR - "%s: find_zr36057() - no VFE found\n", - ZR_DEVNAME(zr)); - goto zr_free_vfe; - } - if (zr->vfe->type != zr->card.video_vfe) { - dprintk(1, - KERN_ERR - "%s: find_zr36057() = wrong VFE\n", - ZR_DEVNAME(zr)); - goto zr_detach_vfe; - } - } - /* Success so keep the pci_dev referenced */ - pci_dev_get(zr->pci_dev); - zoran[zoran_num++] = zr; - continue; - - // Init errors - zr_detach_vfe: - videocodec_detach(zr->vfe); - zr_free_vfe: - kfree(master_vfe); - zr_detach_codec: - videocodec_detach(zr->codec); - zr_free_codec: - kfree(master_codec); - zr_unreg_i2c: - zoran_unregister_i2c(zr); - zr_free_irq: - btwrite(0, ZR36057_SPGPPCR); - free_irq(zr->pci_dev->irq, zr); - zr_unmap: - iounmap(zr->zr36057_mem); - zr_free_mem: - kfree(zr); - continue; - } - if (dev) /* Clean up ref count on early exit */ - pci_dev_put(dev); - - if (zoran_num == 0) { - dprintk(1, KERN_INFO "No known MJPEG cards found.\n"); - } - return zoran_num; -} - -static int __init -init_dc10_cards (void) -{ - int i; - - memset(zoran, 0, sizeof(zoran)); - printk(KERN_INFO "Zoran MJPEG board driver version %d.%d.%d\n", - MAJOR_VERSION, MINOR_VERSION, RELEASE_VERSION); - - /* Look for cards */ - if (find_zr36057() < 0) { - return -EIO; - } - if (zoran_num == 0) - return -ENODEV; - dprintk(1, KERN_INFO "%s: %d card(s) found\n", ZORAN_NAME, - zoran_num); - /* check the parameters we have been given, adjust if necessary */ - if (v4l_nbufs < 2) - v4l_nbufs = 2; - if (v4l_nbufs > VIDEO_MAX_FRAME) - v4l_nbufs = VIDEO_MAX_FRAME; - /* The user specfies the in KB, we want them in byte - * (and page aligned) */ - v4l_bufsize = PAGE_ALIGN(v4l_bufsize * 1024); - if (v4l_bufsize < 32768) - v4l_bufsize = 32768; - /* 2 MB is arbitrary but sufficient for the maximum possible images */ - if (v4l_bufsize > 2048 * 1024) - v4l_bufsize = 2048 * 1024; - if (jpg_nbufs < 4) - jpg_nbufs = 4; - if (jpg_nbufs > BUZ_MAX_FRAME) - jpg_nbufs = BUZ_MAX_FRAME; - jpg_bufsize = PAGE_ALIGN(jpg_bufsize * 1024); - if (jpg_bufsize < 8192) - jpg_bufsize = 8192; - if (jpg_bufsize > (512 * 1024)) - jpg_bufsize = 512 * 1024; - /* Use parameter for vidmem or try to find a video card */ - if (vidmem) { - dprintk(1, - KERN_INFO - "%s: Using supplied video memory base address @ 0x%lx\n", - ZORAN_NAME, vidmem); - } - - /* random nonsense */ - dprintk(6, KERN_DEBUG "Jotti is een held!\n"); - - /* some mainboards might not do PCI-PCI data transfer well */ - if (pci_pci_problems & (PCIPCI_FAIL|PCIAGP_FAIL|PCIPCI_ALIMAGIK)) { - dprintk(1, - KERN_WARNING - "%s: chipset does not support reliable PCI-PCI DMA\n", - ZORAN_NAME); - } - - /* take care of Natoma chipset and a revision 1 zr36057 */ - for (i = 0; i < zoran_num; i++) { - struct zoran *zr = zoran[i]; - - if ((pci_pci_problems & PCIPCI_NATOMA) && zr->revision <= 1) { - zr->jpg_buffers.need_contiguous = 1; - dprintk(1, - KERN_INFO - "%s: ZR36057/Natoma bug, max. buffer size is 128K\n", - ZR_DEVNAME(zr)); - } - - if (zr36057_init(zr) < 0) { - for (i = 0; i < zoran_num; i++) - zoran_release(zoran[i]); - return -EIO; - } - zoran_proc_init(zr); - } - - return 0; -} - -static void __exit -unload_dc10_cards (void) -{ - int i; - - for (i = 0; i < zoran_num; i++) - zoran_release(zoran[i]); -} - -module_init(init_dc10_cards); -module_exit(unload_dc10_cards); diff --git a/drivers/media/video/zoran_card.h b/drivers/media/video/zoran_card.h deleted file mode 100644 index e4dc9d2..0000000 --- a/drivers/media/video/zoran_card.h +++ /dev/null @@ -1,55 +0,0 @@ -/* - * Zoran zr36057/zr36067 PCI controller driver, for the - * Pinnacle/Miro DC10/DC10+/DC30/DC30+, Iomega Buz, Linux - * Media Labs LML33/LML33R10. - * - * This part handles card-specific data and detection - * - * Copyright (C) 2000 Serguei Miridonov - * - * Currently maintained by: - * Ronald Bultje - * Laurent Pinchart - * Mailinglist - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#ifndef __ZORAN_CARD_H__ -#define __ZORAN_CARD_H__ - -extern int zr36067_debug; - -#define dprintk(num, format, args...) \ - do { \ - if (zr36067_debug >= num) \ - printk(format, ##args); \ - } while (0) - -/* Anybody who uses more than four? */ -#define BUZ_MAX 4 -extern int zoran_num; -extern struct zoran *zoran[BUZ_MAX]; - -extern struct video_device zoran_template; - -extern int zoran_check_jpg_settings(struct zoran *zr, - struct zoran_jpg_settings *settings); -extern void zoran_open_init_params(struct zoran *zr); -extern void zoran_vdev_release(struct video_device *vdev); - -void zr36016_write(struct videocodec *codec, u16 reg, u32 val); - -#endif /* __ZORAN_CARD_H__ */ diff --git a/drivers/media/video/zoran_device.c b/drivers/media/video/zoran_device.c deleted file mode 100644 index 5d948ff..0000000 --- a/drivers/media/video/zoran_device.c +++ /dev/null @@ -1,1747 +0,0 @@ -/* - * Zoran zr36057/zr36067 PCI controller driver, for the - * Pinnacle/Miro DC10/DC10+/DC30/DC30+, Iomega Buz, Linux - * Media Labs LML33/LML33R10. - * - * This part handles device access (PCI/I2C/codec/...) - * - * Copyright (C) 2000 Serguei Miridonov - * - * Currently maintained by: - * Ronald Bultje - * Laurent Pinchart - * Mailinglist - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#include -#include -#include -#include - -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include -#include - -#include -#include - -#include "videocodec.h" -#include "zoran.h" -#include "zoran_device.h" -#include "zoran_card.h" - -#define IRQ_MASK ( ZR36057_ISR_GIRQ0 | \ - ZR36057_ISR_GIRQ1 | \ - ZR36057_ISR_JPEGRepIRQ ) - -static int lml33dpath; /* default = 0 - * 1 will use digital path in capture - * mode instead of analog. It can be - * used for picture adjustments using - * tool like xawtv while watching image - * on TV monitor connected to the output. - * However, due to absence of 75 Ohm - * load on Bt819 input, there will be - * some image imperfections */ - -module_param(lml33dpath, bool, 0644); -MODULE_PARM_DESC(lml33dpath, - "Use digital path capture mode (on LML33 cards)"); - -static void -zr36057_init_vfe (struct zoran *zr); - -/* - * General Purpose I/O and Guest bus access - */ - -/* - * This is a bit tricky. When a board lacks a GPIO function, the corresponding - * GPIO bit number in the card_info structure is set to 0. - */ - -void -GPIO (struct zoran *zr, - int bit, - unsigned int value) -{ - u32 reg; - u32 mask; - - /* Make sure the bit number is legal - * A bit number of -1 (lacking) gives a mask of 0, - * making it harmless */ - mask = (1 << (24 + bit)) & 0xff000000; - reg = btread(ZR36057_GPPGCR1) & ~mask; - if (value) { - reg |= mask; - } - btwrite(reg, ZR36057_GPPGCR1); - udelay(1); -} - -/* - * Wait til post office is no longer busy - */ - -int -post_office_wait (struct zoran *zr) -{ - u32 por; - -// while (((por = btread(ZR36057_POR)) & (ZR36057_POR_POPen | ZR36057_POR_POTime)) == ZR36057_POR_POPen) { - while ((por = btread(ZR36057_POR)) & ZR36057_POR_POPen) { - /* wait for something to happen */ - } - if ((por & ZR36057_POR_POTime) && !zr->card.gws_not_connected) { - /* In LML33/BUZ \GWS line is not connected, so it has always timeout set */ - dprintk(1, KERN_INFO "%s: pop timeout %08x\n", ZR_DEVNAME(zr), - por); - return -1; - } - - return 0; -} - -int -post_office_write (struct zoran *zr, - unsigned int guest, - unsigned int reg, - unsigned int value) -{ - u32 por; - - por = - ZR36057_POR_PODir | ZR36057_POR_POTime | ((guest & 7) << 20) | - ((reg & 7) << 16) | (value & 0xFF); - btwrite(por, ZR36057_POR); - - return post_office_wait(zr); -} - -int -post_office_read (struct zoran *zr, - unsigned int guest, - unsigned int reg) -{ - u32 por; - - por = ZR36057_POR_POTime | ((guest & 7) << 20) | ((reg & 7) << 16); - btwrite(por, ZR36057_POR); - if (post_office_wait(zr) < 0) { - return -1; - } - - return btread(ZR36057_POR) & 0xFF; -} - -/* - * detect guests - */ - -static void -dump_guests (struct zoran *zr) -{ - if (zr36067_debug > 2) { - int i, guest[8]; - - for (i = 1; i < 8; i++) { // Don't read jpeg codec here - guest[i] = post_office_read(zr, i, 0); - } - - printk(KERN_INFO "%s: Guests:", ZR_DEVNAME(zr)); - - for (i = 1; i < 8; i++) { - printk(" 0x%02x", guest[i]); - } - printk("\n"); - } -} - -static inline unsigned long -get_time (void) -{ - struct timeval tv; - - do_gettimeofday(&tv); - return (1000000 * tv.tv_sec + tv.tv_usec); -} - -void -detect_guest_activity (struct zoran *zr) -{ - int timeout, i, j, res, guest[8], guest0[8], change[8][3]; - unsigned long t0, t1; - - dump_guests(zr); - printk(KERN_INFO "%s: Detecting guests activity, please wait...\n", - ZR_DEVNAME(zr)); - for (i = 1; i < 8; i++) { // Don't read jpeg codec here - guest0[i] = guest[i] = post_office_read(zr, i, 0); - } - - timeout = 0; - j = 0; - t0 = get_time(); - while (timeout < 10000) { - udelay(10); - timeout++; - for (i = 1; (i < 8) && (j < 8); i++) { - res = post_office_read(zr, i, 0); - if (res != guest[i]) { - t1 = get_time(); - change[j][0] = (t1 - t0); - t0 = t1; - change[j][1] = i; - change[j][2] = res; - j++; - guest[i] = res; - } - } - if (j >= 8) - break; - } - printk(KERN_INFO "%s: Guests:", ZR_DEVNAME(zr)); - - for (i = 1; i < 8; i++) { - printk(" 0x%02x", guest0[i]); - } - printk("\n"); - if (j == 0) { - printk(KERN_INFO "%s: No activity detected.\n", ZR_DEVNAME(zr)); - return; - } - for (i = 0; i < j; i++) { - printk(KERN_INFO "%s: %6d: %d => 0x%02x\n", ZR_DEVNAME(zr), - change[i][0], change[i][1], change[i][2]); - } -} - -/* - * JPEG Codec access - */ - -void -jpeg_codec_sleep (struct zoran *zr, - int sleep) -{ - GPIO(zr, zr->card.gpio[ZR_GPIO_JPEG_SLEEP], !sleep); - if (!sleep) { - dprintk(3, - KERN_DEBUG - "%s: jpeg_codec_sleep() - wake GPIO=0x%08x\n", - ZR_DEVNAME(zr), btread(ZR36057_GPPGCR1)); - udelay(500); - } else { - dprintk(3, - KERN_DEBUG - "%s: jpeg_codec_sleep() - sleep GPIO=0x%08x\n", - ZR_DEVNAME(zr), btread(ZR36057_GPPGCR1)); - udelay(2); - } -} - -int -jpeg_codec_reset (struct zoran *zr) -{ - /* Take the codec out of sleep */ - jpeg_codec_sleep(zr, 0); - - if (zr->card.gpcs[GPCS_JPEG_RESET] != 0xff) { - post_office_write(zr, zr->card.gpcs[GPCS_JPEG_RESET], 0, - 0); - udelay(2); - } else { - GPIO(zr, zr->card.gpio[ZR_GPIO_JPEG_RESET], 0); - udelay(2); - GPIO(zr, zr->card.gpio[ZR_GPIO_JPEG_RESET], 1); - udelay(2); - } - - return 0; -} - -/* - * Set the registers for the size we have specified. Don't bother - * trying to understand this without the ZR36057 manual in front of - * you [AC]. - * - * PS: The manual is free for download in .pdf format from - * www.zoran.com - nicely done those folks. - */ - -static void -zr36057_adjust_vfe (struct zoran *zr, - enum zoran_codec_mode mode) -{ - u32 reg; - - switch (mode) { - case BUZ_MODE_MOTION_DECOMPRESS: - btand(~ZR36057_VFESPFR_ExtFl, ZR36057_VFESPFR); - reg = btread(ZR36057_VFEHCR); - if ((reg & (1 << 10)) && zr->card.type != LML33R10) { - reg += ((1 << 10) | 1); - } - btwrite(reg, ZR36057_VFEHCR); - break; - case BUZ_MODE_MOTION_COMPRESS: - case BUZ_MODE_IDLE: - default: - if (zr->norm == VIDEO_MODE_NTSC || - (zr->card.type == LML33R10 && - zr->norm == VIDEO_MODE_PAL)) - btand(~ZR36057_VFESPFR_ExtFl, ZR36057_VFESPFR); - else - btor(ZR36057_VFESPFR_ExtFl, ZR36057_VFESPFR); - reg = btread(ZR36057_VFEHCR); - if (!(reg & (1 << 10)) && zr->card.type != LML33R10) { - reg -= ((1 << 10) | 1); - } - btwrite(reg, ZR36057_VFEHCR); - break; - } -} - -/* - * set geometry - */ - -static void -zr36057_set_vfe (struct zoran *zr, - int video_width, - int video_height, - const struct zoran_format *format) -{ - struct tvnorm *tvn; - unsigned HStart, HEnd, VStart, VEnd; - unsigned DispMode; - unsigned VidWinWid, VidWinHt; - unsigned hcrop1, hcrop2, vcrop1, vcrop2; - unsigned Wa, We, Ha, He; - unsigned X, Y, HorDcm, VerDcm; - u32 reg; - unsigned mask_line_size; - - tvn = zr->timing; - - Wa = tvn->Wa; - Ha = tvn->Ha; - - dprintk(2, KERN_INFO "%s: set_vfe() - width = %d, height = %d\n", - ZR_DEVNAME(zr), video_width, video_height); - - if (zr->norm != VIDEO_MODE_PAL && - zr->norm != VIDEO_MODE_NTSC && - zr->norm != VIDEO_MODE_SECAM) { - dprintk(1, - KERN_ERR "%s: set_vfe() - norm = %d not valid\n", - ZR_DEVNAME(zr), zr->norm); - return; - } - if (video_width < BUZ_MIN_WIDTH || - video_height < BUZ_MIN_HEIGHT || - video_width > Wa || video_height > Ha) { - dprintk(1, KERN_ERR "%s: set_vfe: w=%d h=%d not valid\n", - ZR_DEVNAME(zr), video_width, video_height); - return; - } - - /**** zr36057 ****/ - - /* horizontal */ - VidWinWid = video_width; - X = DIV_ROUND_UP(VidWinWid * 64, tvn->Wa); - We = (VidWinWid * 64) / X; - HorDcm = 64 - X; - hcrop1 = 2 * ((tvn->Wa - We) / 4); - hcrop2 = tvn->Wa - We - hcrop1; - HStart = tvn->HStart ? tvn->HStart : 1; - /* (Ronald) Original comment: - * "| 1 Doesn't have any effect, tested on both a DC10 and a DC10+" - * this is false. It inverses chroma values on the LML33R10 (so Cr - * suddenly is shown as Cb and reverse, really cool effect if you - * want to see blue faces, not useful otherwise). So don't use |1. - * However, the DC10 has '0' as HStart, but does need |1, so we - * use a dirty check... - */ - HEnd = HStart + tvn->Wa - 1; - HStart += hcrop1; - HEnd -= hcrop2; - reg = ((HStart & ZR36057_VFEHCR_Hmask) << ZR36057_VFEHCR_HStart) - | ((HEnd & ZR36057_VFEHCR_Hmask) << ZR36057_VFEHCR_HEnd); - if (zr->card.vfe_pol.hsync_pol) - reg |= ZR36057_VFEHCR_HSPol; - btwrite(reg, ZR36057_VFEHCR); - - /* Vertical */ - DispMode = !(video_height > BUZ_MAX_HEIGHT / 2); - VidWinHt = DispMode ? video_height : video_height / 2; - Y = DIV_ROUND_UP(VidWinHt * 64 * 2, tvn->Ha); - He = (VidWinHt * 64) / Y; - VerDcm = 64 - Y; - vcrop1 = (tvn->Ha / 2 - He) / 2; - vcrop2 = tvn->Ha / 2 - He - vcrop1; - VStart = tvn->VStart; - VEnd = VStart + tvn->Ha / 2; // - 1; FIXME SnapShot times out with -1 in 768*576 on the DC10 - LP - VStart += vcrop1; - VEnd -= vcrop2; - reg = ((VStart & ZR36057_VFEVCR_Vmask) << ZR36057_VFEVCR_VStart) - | ((VEnd & ZR36057_VFEVCR_Vmask) << ZR36057_VFEVCR_VEnd); - if (zr->card.vfe_pol.vsync_pol) - reg |= ZR36057_VFEVCR_VSPol; - btwrite(reg, ZR36057_VFEVCR); - - /* scaler and pixel format */ - reg = 0; - reg |= (HorDcm << ZR36057_VFESPFR_HorDcm); - reg |= (VerDcm << ZR36057_VFESPFR_VerDcm); - reg |= (DispMode << ZR36057_VFESPFR_DispMode); - /* RJ: I don't know, why the following has to be the opposite - * of the corresponding ZR36060 setting, but only this way - * we get the correct colors when uncompressing to the screen */ - //reg |= ZR36057_VFESPFR_VCLKPol; /**/ - /* RJ: Don't know if that is needed for NTSC also */ - if (zr->norm != VIDEO_MODE_NTSC) - reg |= ZR36057_VFESPFR_ExtFl; // NEEDED!!!!!!! Wolfgang - reg |= ZR36057_VFESPFR_TopField; - if (HorDcm >= 48) { - reg |= 3 << ZR36057_VFESPFR_HFilter; /* 5 tap filter */ - } else if (HorDcm >= 32) { - reg |= 2 << ZR36057_VFESPFR_HFilter; /* 4 tap filter */ - } else if (HorDcm >= 16) { - reg |= 1 << ZR36057_VFESPFR_HFilter; /* 3 tap filter */ - } - reg |= format->vfespfr; - btwrite(reg, ZR36057_VFESPFR); - - /* display configuration */ - reg = (16 << ZR36057_VDCR_MinPix) - | (VidWinHt << ZR36057_VDCR_VidWinHt) - | (VidWinWid << ZR36057_VDCR_VidWinWid); - if (pci_pci_problems & PCIPCI_TRITON) - // || zr->revision < 1) // Revision 1 has also Triton support - reg &= ~ZR36057_VDCR_Triton; - else - reg |= ZR36057_VDCR_Triton; - btwrite(reg, ZR36057_VDCR); - - /* (Ronald) don't write this if overlay_mask = NULL */ - if (zr->overlay_mask) { - /* Write overlay clipping mask data, but don't enable overlay clipping */ - /* RJ: since this makes only sense on the screen, we use - * zr->overlay_settings.width instead of video_width */ - - mask_line_size = (BUZ_MAX_WIDTH + 31) / 32; - reg = virt_to_bus(zr->overlay_mask); - btwrite(reg, ZR36057_MMTR); - reg = virt_to_bus(zr->overlay_mask + mask_line_size); - btwrite(reg, ZR36057_MMBR); - reg = - mask_line_size - (zr->overlay_settings.width + - 31) / 32; - if (DispMode == 0) - reg += mask_line_size; - reg <<= ZR36057_OCR_MaskStride; - btwrite(reg, ZR36057_OCR); - } - - zr36057_adjust_vfe(zr, zr->codec_mode); -} - -/* - * Switch overlay on or off - */ - -void -zr36057_overlay (struct zoran *zr, - int on) -{ - u32 reg; - - if (on) { - /* do the necessary settings ... */ - btand(~ZR36057_VDCR_VidEn, ZR36057_VDCR); /* switch it off first */ - - zr36057_set_vfe(zr, - zr->overlay_settings.width, - zr->overlay_settings.height, - zr->overlay_settings.format); - - /* Start and length of each line MUST be 4-byte aligned. - * This should be allready checked before the call to this routine. - * All error messages are internal driver checking only! */ - - /* video display top and bottom registers */ - reg = (long) zr->buffer.base + - zr->overlay_settings.x * - ((zr->overlay_settings.format->depth + 7) / 8) + - zr->overlay_settings.y * - zr->buffer.bytesperline; - btwrite(reg, ZR36057_VDTR); - if (reg & 3) - dprintk(1, - KERN_ERR - "%s: zr36057_overlay() - video_address not aligned\n", - ZR_DEVNAME(zr)); - if (zr->overlay_settings.height > BUZ_MAX_HEIGHT / 2) - reg += zr->buffer.bytesperline; - btwrite(reg, ZR36057_VDBR); - - /* video stride, status, and frame grab register */ - reg = zr->buffer.bytesperline - - zr->overlay_settings.width * - ((zr->overlay_settings.format->depth + 7) / 8); - if (zr->overlay_settings.height > BUZ_MAX_HEIGHT / 2) - reg += zr->buffer.bytesperline; - if (reg & 3) - dprintk(1, - KERN_ERR - "%s: zr36057_overlay() - video_stride not aligned\n", - ZR_DEVNAME(zr)); - reg = (reg << ZR36057_VSSFGR_DispStride); - reg |= ZR36057_VSSFGR_VidOvf; /* clear overflow status */ - btwrite(reg, ZR36057_VSSFGR); - - /* Set overlay clipping */ - if (zr->overlay_settings.clipcount > 0) - btor(ZR36057_OCR_OvlEnable, ZR36057_OCR); - - /* ... and switch it on */ - btor(ZR36057_VDCR_VidEn, ZR36057_VDCR); - } else { - /* Switch it off */ - btand(~ZR36057_VDCR_VidEn, ZR36057_VDCR); - } -} - -/* - * The overlay mask has one bit for each pixel on a scan line, - * and the maximum window size is BUZ_MAX_WIDTH * BUZ_MAX_HEIGHT pixels. - */ - -void -write_overlay_mask (struct file *file, - struct video_clip *vp, - int count) -{ - struct zoran_fh *fh = file->private_data; - struct zoran *zr = fh->zr; - unsigned mask_line_size = (BUZ_MAX_WIDTH + 31) / 32; - u32 *mask; - int x, y, width, height; - unsigned i, j, k; - u32 reg; - - /* fill mask with one bits */ - memset(fh->overlay_mask, ~0, mask_line_size * 4 * BUZ_MAX_HEIGHT); - reg = 0; - - for (i = 0; i < count; ++i) { - /* pick up local copy of clip */ - x = vp[i].x; - y = vp[i].y; - width = vp[i].width; - height = vp[i].height; - - /* trim clips that extend beyond the window */ - if (x < 0) { - width += x; - x = 0; - } - if (y < 0) { - height += y; - y = 0; - } - if (x + width > fh->overlay_settings.width) { - width = fh->overlay_settings.width - x; - } - if (y + height > fh->overlay_settings.height) { - height = fh->overlay_settings.height - y; - } - - /* ignore degenerate clips */ - if (height <= 0) { - continue; - } - if (width <= 0) { - continue; - } - - /* apply clip for each scan line */ - for (j = 0; j < height; ++j) { - /* reset bit for each pixel */ - /* this can be optimized later if need be */ - mask = fh->overlay_mask + (y + j) * mask_line_size; - for (k = 0; k < width; ++k) { - mask[(x + k) / 32] &= - ~((u32) 1 << (x + k) % 32); - } - } - } -} - -/* Enable/Disable uncompressed memory grabbing of the 36057 */ - -void -zr36057_set_memgrab (struct zoran *zr, - int mode) -{ - if (mode) { - /* We only check SnapShot and not FrameGrab here. SnapShot==1 - * means a capture is already in progress, but FrameGrab==1 - * doesn't necessary mean that. It's more correct to say a 1 - * to 0 transition indicates a capture completed. If a - * capture is pending when capturing is tuned off, FrameGrab - * will be stuck at 1 until capturing is turned back on. - */ - if (btread(ZR36057_VSSFGR) & ZR36057_VSSFGR_SnapShot) - dprintk(1, - KERN_WARNING - "%s: zr36057_set_memgrab(1) with SnapShot on!?\n", - ZR_DEVNAME(zr)); - - /* switch on VSync interrupts */ - btwrite(IRQ_MASK, ZR36057_ISR); // Clear Interrupts - btor(zr->card.vsync_int, ZR36057_ICR); // SW - - /* enable SnapShot */ - btor(ZR36057_VSSFGR_SnapShot, ZR36057_VSSFGR); - - /* Set zr36057 video front end and enable video */ - zr36057_set_vfe(zr, zr->v4l_settings.width, - zr->v4l_settings.height, - zr->v4l_settings.format); - - zr->v4l_memgrab_active = 1; - } else { - /* switch off VSync interrupts */ - btand(~zr->card.vsync_int, ZR36057_ICR); // SW - - zr->v4l_memgrab_active = 0; - zr->v4l_grab_frame = NO_GRAB_ACTIVE; - - /* reenable grabbing to screen if it was running */ - if (zr->v4l_overlay_active) { - zr36057_overlay(zr, 1); - } else { - btand(~ZR36057_VDCR_VidEn, ZR36057_VDCR); - btand(~ZR36057_VSSFGR_SnapShot, ZR36057_VSSFGR); - } - } -} - -int -wait_grab_pending (struct zoran *zr) -{ - unsigned long flags; - - /* wait until all pending grabs are finished */ - - if (!zr->v4l_memgrab_active) - return 0; - - wait_event_interruptible(zr->v4l_capq, - (zr->v4l_pend_tail == zr->v4l_pend_head)); - if (signal_pending(current)) - return -ERESTARTSYS; - - spin_lock_irqsave(&zr->spinlock, flags); - zr36057_set_memgrab(zr, 0); - spin_unlock_irqrestore(&zr->spinlock, flags); - - return 0; -} - -/***************************************************************************** - * * - * Set up the Buz-specific MJPEG part * - * * - *****************************************************************************/ - -static inline void -set_frame (struct zoran *zr, - int val) -{ - GPIO(zr, zr->card.gpio[ZR_GPIO_JPEG_FRAME], val); -} - -static void -set_videobus_dir (struct zoran *zr, - int val) -{ - switch (zr->card.type) { - case LML33: - case LML33R10: - if (lml33dpath == 0) - GPIO(zr, 5, val); - else - GPIO(zr, 5, 1); - break; - default: - GPIO(zr, zr->card.gpio[ZR_GPIO_VID_DIR], - zr->card.gpio_pol[ZR_GPIO_VID_DIR] ? !val : val); - break; - } -} - -static void -init_jpeg_queue (struct zoran *zr) -{ - int i; - - /* re-initialize DMA ring stuff */ - zr->jpg_que_head = 0; - zr->jpg_dma_head = 0; - zr->jpg_dma_tail = 0; - zr->jpg_que_tail = 0; - zr->jpg_seq_num = 0; - zr->JPEG_error = 0; - zr->num_errors = 0; - zr->jpg_err_seq = 0; - zr->jpg_err_shift = 0; - zr->jpg_queued_num = 0; - for (i = 0; i < zr->jpg_buffers.num_buffers; i++) { - zr->jpg_buffers.buffer[i].state = BUZ_STATE_USER; /* nothing going on */ - } - for (i = 0; i < BUZ_NUM_STAT_COM; i++) { - zr->stat_com[i] = cpu_to_le32(1); /* mark as unavailable to zr36057 */ - } -} - -static void -zr36057_set_jpg (struct zoran *zr, - enum zoran_codec_mode mode) -{ - struct tvnorm *tvn; - u32 reg; - - tvn = zr->timing; - - /* assert P_Reset, disable code transfer, deassert Active */ - btwrite(0, ZR36057_JPC); - - /* MJPEG compression mode */ - switch (mode) { - - case BUZ_MODE_MOTION_COMPRESS: - default: - reg = ZR36057_JMC_MJPGCmpMode; - break; - - case BUZ_MODE_MOTION_DECOMPRESS: - reg = ZR36057_JMC_MJPGExpMode; - reg |= ZR36057_JMC_SyncMstr; - /* RJ: The following is experimental - improves the output to screen */ - //if(zr->jpg_settings.VFIFO_FB) reg |= ZR36057_JMC_VFIFO_FB; // No, it doesn't. SM - break; - - case BUZ_MODE_STILL_COMPRESS: - reg = ZR36057_JMC_JPGCmpMode; - break; - - case BUZ_MODE_STILL_DECOMPRESS: - reg = ZR36057_JMC_JPGExpMode; - break; - - } - reg |= ZR36057_JMC_JPG; - if (zr->jpg_settings.field_per_buff == 1) - reg |= ZR36057_JMC_Fld_per_buff; - btwrite(reg, ZR36057_JMC); - - /* vertical */ - btor(ZR36057_VFEVCR_VSPol, ZR36057_VFEVCR); - reg = (6 << ZR36057_VSP_VsyncSize) | - (tvn->Ht << ZR36057_VSP_FrmTot); - btwrite(reg, ZR36057_VSP); - reg = ((zr->jpg_settings.img_y + tvn->VStart) << ZR36057_FVAP_NAY) | - (zr->jpg_settings.img_height << ZR36057_FVAP_PAY); - btwrite(reg, ZR36057_FVAP); - - /* horizontal */ - if (zr->card.vfe_pol.hsync_pol) - btor(ZR36057_VFEHCR_HSPol, ZR36057_VFEHCR); - else - btand(~ZR36057_VFEHCR_HSPol, ZR36057_VFEHCR); - reg = ((tvn->HSyncStart) << ZR36057_HSP_HsyncStart) | - (tvn->Wt << ZR36057_HSP_LineTot); - btwrite(reg, ZR36057_HSP); - reg = ((zr->jpg_settings.img_x + - tvn->HStart + 4) << ZR36057_FHAP_NAX) | - (zr->jpg_settings.img_width << ZR36057_FHAP_PAX); - btwrite(reg, ZR36057_FHAP); - - /* field process parameters */ - if (zr->jpg_settings.odd_even) - reg = ZR36057_FPP_Odd_Even; - else - reg = 0; - - btwrite(reg, ZR36057_FPP); - - /* Set proper VCLK Polarity, else colors will be wrong during playback */ - //btor(ZR36057_VFESPFR_VCLKPol, ZR36057_VFESPFR); - - /* code base address */ - reg = virt_to_bus(zr->stat_com); - btwrite(reg, ZR36057_JCBA); - - /* FIFO threshold (FIFO is 160. double words) */ - /* NOTE: decimal values here */ - switch (mode) { - - case BUZ_MODE_STILL_COMPRESS: - case BUZ_MODE_MOTION_COMPRESS: - if (zr->card.type != BUZ) - reg = 140; - else - reg = 60; - break; - - case BUZ_MODE_STILL_DECOMPRESS: - case BUZ_MODE_MOTION_DECOMPRESS: - reg = 20; - break; - - default: - reg = 80; - break; - - } - btwrite(reg, ZR36057_JCFT); - zr36057_adjust_vfe(zr, mode); - -} - -void -print_interrupts (struct zoran *zr) -{ - int res, noerr = 0; - - printk(KERN_INFO "%s: interrupts received:", ZR_DEVNAME(zr)); - if ((res = zr->field_counter) < -1 || res > 1) { - printk(" FD:%d", res); - } - if ((res = zr->intr_counter_GIRQ1) != 0) { - printk(" GIRQ1:%d", res); - noerr++; - } - if ((res = zr->intr_counter_GIRQ0) != 0) { - printk(" GIRQ0:%d", res); - noerr++; - } - if ((res = zr->intr_counter_CodRepIRQ) != 0) { - printk(" CodRepIRQ:%d", res); - noerr++; - } - if ((res = zr->intr_counter_JPEGRepIRQ) != 0) { - printk(" JPEGRepIRQ:%d", res); - noerr++; - } - if (zr->JPEG_max_missed) { - printk(" JPEG delays: max=%d min=%d", zr->JPEG_max_missed, - zr->JPEG_min_missed); - } - if (zr->END_event_missed) { - printk(" ENDs missed: %d", zr->END_event_missed); - } - //if (zr->jpg_queued_num) { - printk(" queue_state=%ld/%ld/%ld/%ld", zr->jpg_que_tail, - zr->jpg_dma_tail, zr->jpg_dma_head, zr->jpg_que_head); - //} - if (!noerr) { - printk(": no interrupts detected."); - } - printk("\n"); -} - -void -clear_interrupt_counters (struct zoran *zr) -{ - zr->intr_counter_GIRQ1 = 0; - zr->intr_counter_GIRQ0 = 0; - zr->intr_counter_CodRepIRQ = 0; - zr->intr_counter_JPEGRepIRQ = 0; - zr->field_counter = 0; - zr->IRQ1_in = 0; - zr->IRQ1_out = 0; - zr->JPEG_in = 0; - zr->JPEG_out = 0; - zr->JPEG_0 = 0; - zr->JPEG_1 = 0; - zr->END_event_missed = 0; - zr->JPEG_missed = 0; - zr->JPEG_max_missed = 0; - zr->JPEG_min_missed = 0x7fffffff; -} - -static u32 -count_reset_interrupt (struct zoran *zr) -{ - u32 isr; - - if ((isr = btread(ZR36057_ISR) & 0x78000000)) { - if (isr & ZR36057_ISR_GIRQ1) { - btwrite(ZR36057_ISR_GIRQ1, ZR36057_ISR); - zr->intr_counter_GIRQ1++; - } - if (isr & ZR36057_ISR_GIRQ0) { - btwrite(ZR36057_ISR_GIRQ0, ZR36057_ISR); - zr->intr_counter_GIRQ0++; - } - if (isr & ZR36057_ISR_CodRepIRQ) { - btwrite(ZR36057_ISR_CodRepIRQ, ZR36057_ISR); - zr->intr_counter_CodRepIRQ++; - } - if (isr & ZR36057_ISR_JPEGRepIRQ) { - btwrite(ZR36057_ISR_JPEGRepIRQ, ZR36057_ISR); - zr->intr_counter_JPEGRepIRQ++; - } - } - return isr; -} - -void -jpeg_start (struct zoran *zr) -{ - int reg; - - zr->frame_num = 0; - - /* deassert P_reset, disable code transfer, deassert Active */ - btwrite(ZR36057_JPC_P_Reset, ZR36057_JPC); - /* stop flushing the internal code buffer */ - btand(~ZR36057_MCTCR_CFlush, ZR36057_MCTCR); - /* enable code transfer */ - btor(ZR36057_JPC_CodTrnsEn, ZR36057_JPC); - - /* clear IRQs */ - btwrite(IRQ_MASK, ZR36057_ISR); - /* enable the JPEG IRQs */ - btwrite(zr->card.jpeg_int | - ZR36057_ICR_JPEGRepIRQ | - ZR36057_ICR_IntPinEn, - ZR36057_ICR); - - set_frame(zr, 0); // \FRAME - - /* set the JPEG codec guest ID */ - reg = (zr->card.gpcs[1] << ZR36057_JCGI_JPEGuestID) | - (0 << ZR36057_JCGI_JPEGuestReg); - btwrite(reg, ZR36057_JCGI); - - if (zr->card.video_vfe == CODEC_TYPE_ZR36016 && - zr->card.video_codec == CODEC_TYPE_ZR36050) { - /* Enable processing on the ZR36016 */ - if (zr->vfe) - zr36016_write(zr->vfe, 0, 1); - - /* load the address of the GO register in the ZR36050 latch */ - post_office_write(zr, 0, 0, 0); - } - - /* assert Active */ - btor(ZR36057_JPC_Active, ZR36057_JPC); - - /* enable the Go generation */ - btor(ZR36057_JMC_Go_en, ZR36057_JMC); - udelay(30); - - set_frame(zr, 1); // /FRAME - - dprintk(3, KERN_DEBUG "%s: jpeg_start\n", ZR_DEVNAME(zr)); -} - -void -zr36057_enable_jpg (struct zoran *zr, - enum zoran_codec_mode mode) -{ - static int zero; - static int one = 1; - struct vfe_settings cap; - int field_size = - zr->jpg_buffers.buffer_size / zr->jpg_settings.field_per_buff; - - zr->codec_mode = mode; - - cap.x = zr->jpg_settings.img_x; - cap.y = zr->jpg_settings.img_y; - cap.width = zr->jpg_settings.img_width; - cap.height = zr->jpg_settings.img_height; - cap.decimation = - zr->jpg_settings.HorDcm | (zr->jpg_settings.VerDcm << 8); - cap.quality = zr->jpg_settings.jpg_comp.quality; - - switch (mode) { - - case BUZ_MODE_MOTION_COMPRESS: { - struct jpeg_app_marker app; - struct jpeg_com_marker com; - - /* In motion compress mode, the decoder output must be enabled, and - * the video bus direction set to input. - */ - set_videobus_dir(zr, 0); - decoder_command(zr, DECODER_ENABLE_OUTPUT, &one); - encoder_command(zr, ENCODER_SET_INPUT, &zero); - - /* Take the JPEG codec and the VFE out of sleep */ - jpeg_codec_sleep(zr, 0); - - /* set JPEG app/com marker */ - app.appn = zr->jpg_settings.jpg_comp.APPn; - app.len = zr->jpg_settings.jpg_comp.APP_len; - memcpy(app.data, zr->jpg_settings.jpg_comp.APP_data, 60); - zr->codec->control(zr->codec, CODEC_S_JPEG_APP_DATA, - sizeof(struct jpeg_app_marker), &app); - - com.len = zr->jpg_settings.jpg_comp.COM_len; - memcpy(com.data, zr->jpg_settings.jpg_comp.COM_data, 60); - zr->codec->control(zr->codec, CODEC_S_JPEG_COM_DATA, - sizeof(struct jpeg_com_marker), &com); - - /* Setup the JPEG codec */ - zr->codec->control(zr->codec, CODEC_S_JPEG_TDS_BYTE, - sizeof(int), &field_size); - zr->codec->set_video(zr->codec, zr->timing, &cap, - &zr->card.vfe_pol); - zr->codec->set_mode(zr->codec, CODEC_DO_COMPRESSION); - - /* Setup the VFE */ - if (zr->vfe) { - zr->vfe->control(zr->vfe, CODEC_S_JPEG_TDS_BYTE, - sizeof(int), &field_size); - zr->vfe->set_video(zr->vfe, zr->timing, &cap, - &zr->card.vfe_pol); - zr->vfe->set_mode(zr->vfe, CODEC_DO_COMPRESSION); - } - - init_jpeg_queue(zr); - zr36057_set_jpg(zr, mode); // \P_Reset, ... Video param, FIFO - - clear_interrupt_counters(zr); - dprintk(2, KERN_INFO "%s: enable_jpg(MOTION_COMPRESS)\n", - ZR_DEVNAME(zr)); - break; - } - - case BUZ_MODE_MOTION_DECOMPRESS: - /* In motion decompression mode, the decoder output must be disabled, and - * the video bus direction set to output. - */ - decoder_command(zr, DECODER_ENABLE_OUTPUT, &zero); - set_videobus_dir(zr, 1); - encoder_command(zr, ENCODER_SET_INPUT, &one); - - /* Take the JPEG codec and the VFE out of sleep */ - jpeg_codec_sleep(zr, 0); - /* Setup the VFE */ - if (zr->vfe) { - zr->vfe->set_video(zr->vfe, zr->timing, &cap, - &zr->card.vfe_pol); - zr->vfe->set_mode(zr->vfe, CODEC_DO_EXPANSION); - } - /* Setup the JPEG codec */ - zr->codec->set_video(zr->codec, zr->timing, &cap, - &zr->card.vfe_pol); - zr->codec->set_mode(zr->codec, CODEC_DO_EXPANSION); - - init_jpeg_queue(zr); - zr36057_set_jpg(zr, mode); // \P_Reset, ... Video param, FIFO - - clear_interrupt_counters(zr); - dprintk(2, KERN_INFO "%s: enable_jpg(MOTION_DECOMPRESS)\n", - ZR_DEVNAME(zr)); - break; - - case BUZ_MODE_IDLE: - default: - /* shut down processing */ - btand(~(zr->card.jpeg_int | ZR36057_ICR_JPEGRepIRQ), - ZR36057_ICR); - btwrite(zr->card.jpeg_int | ZR36057_ICR_JPEGRepIRQ, - ZR36057_ISR); - btand(~ZR36057_JMC_Go_en, ZR36057_JMC); // \Go_en - - msleep(50); - - set_videobus_dir(zr, 0); - set_frame(zr, 1); // /FRAME - btor(ZR36057_MCTCR_CFlush, ZR36057_MCTCR); // /CFlush - btwrite(0, ZR36057_JPC); // \P_Reset,\CodTrnsEn,\Active - btand(~ZR36057_JMC_VFIFO_FB, ZR36057_JMC); - btand(~ZR36057_JMC_SyncMstr, ZR36057_JMC); - jpeg_codec_reset(zr); - jpeg_codec_sleep(zr, 1); - zr36057_adjust_vfe(zr, mode); - - decoder_command(zr, DECODER_ENABLE_OUTPUT, &one); - encoder_command(zr, ENCODER_SET_INPUT, &zero); - - dprintk(2, KERN_INFO "%s: enable_jpg(IDLE)\n", ZR_DEVNAME(zr)); - break; - - } -} - -/* when this is called the spinlock must be held */ -void -zoran_feed_stat_com (struct zoran *zr) -{ - /* move frames from pending queue to DMA */ - - int frame, i, max_stat_com; - - max_stat_com = - (zr->jpg_settings.TmpDcm == - 1) ? BUZ_NUM_STAT_COM : (BUZ_NUM_STAT_COM >> 1); - - while ((zr->jpg_dma_head - zr->jpg_dma_tail) < max_stat_com && - zr->jpg_dma_head < zr->jpg_que_head) { - - frame = zr->jpg_pend[zr->jpg_dma_head & BUZ_MASK_FRAME]; - if (zr->jpg_settings.TmpDcm == 1) { - /* fill 1 stat_com entry */ - i = (zr->jpg_dma_head - - zr->jpg_err_shift) & BUZ_MASK_STAT_COM; - if (!(zr->stat_com[i] & cpu_to_le32(1))) - break; - zr->stat_com[i] = - cpu_to_le32(zr->jpg_buffers.buffer[frame].frag_tab_bus); - } else { - /* fill 2 stat_com entries */ - i = ((zr->jpg_dma_head - - zr->jpg_err_shift) & 1) * 2; - if (!(zr->stat_com[i] & cpu_to_le32(1))) - break; - zr->stat_com[i] = - cpu_to_le32(zr->jpg_buffers.buffer[frame].frag_tab_bus); - zr->stat_com[i + 1] = - cpu_to_le32(zr->jpg_buffers.buffer[frame].frag_tab_bus); - } - zr->jpg_buffers.buffer[frame].state = BUZ_STATE_DMA; - zr->jpg_dma_head++; - - } - if (zr->codec_mode == BUZ_MODE_MOTION_DECOMPRESS) - zr->jpg_queued_num++; -} - -/* when this is called the spinlock must be held */ -static void -zoran_reap_stat_com (struct zoran *zr) -{ - /* move frames from DMA queue to done queue */ - - int i; - u32 stat_com; - unsigned int seq; - unsigned int dif; - struct zoran_jpg_buffer *buffer; - int frame; - - /* In motion decompress we don't have a hardware frame counter, - * we just count the interrupts here */ - - if (zr->codec_mode == BUZ_MODE_MOTION_DECOMPRESS) { - zr->jpg_seq_num++; - } - while (zr->jpg_dma_tail < zr->jpg_dma_head) { - if (zr->jpg_settings.TmpDcm == 1) - i = (zr->jpg_dma_tail - - zr->jpg_err_shift) & BUZ_MASK_STAT_COM; - else - i = ((zr->jpg_dma_tail - - zr->jpg_err_shift) & 1) * 2 + 1; - - stat_com = le32_to_cpu(zr->stat_com[i]); - - if ((stat_com & 1) == 0) { - return; - } - frame = zr->jpg_pend[zr->jpg_dma_tail & BUZ_MASK_FRAME]; - buffer = &zr->jpg_buffers.buffer[frame]; - do_gettimeofday(&buffer->bs.timestamp); - - if (zr->codec_mode == BUZ_MODE_MOTION_COMPRESS) { - buffer->bs.length = (stat_com & 0x7fffff) >> 1; - - /* update sequence number with the help of the counter in stat_com */ - - seq = ((stat_com >> 24) + zr->jpg_err_seq) & 0xff; - dif = (seq - zr->jpg_seq_num) & 0xff; - zr->jpg_seq_num += dif; - } else { - buffer->bs.length = 0; - } - buffer->bs.seq = - zr->jpg_settings.TmpDcm == - 2 ? (zr->jpg_seq_num >> 1) : zr->jpg_seq_num; - buffer->state = BUZ_STATE_DONE; - - zr->jpg_dma_tail++; - } -} - -static void -error_handler (struct zoran *zr, - u32 astat, - u32 stat) -{ - /* This is JPEG error handling part */ - if ((zr->codec_mode != BUZ_MODE_MOTION_COMPRESS) && - (zr->codec_mode != BUZ_MODE_MOTION_DECOMPRESS)) { - //dprintk(1, KERN_ERR "%s: Internal error: error handling request in mode %d\n", ZR_DEVNAME(zr), zr->codec_mode); - return; - } - - if ((stat & 1) == 0 && - zr->codec_mode == BUZ_MODE_MOTION_COMPRESS && - zr->jpg_dma_tail - zr->jpg_que_tail >= - zr->jpg_buffers.num_buffers) { - /* No free buffers... */ - zoran_reap_stat_com(zr); - zoran_feed_stat_com(zr); - wake_up_interruptible(&zr->jpg_capq); - zr->JPEG_missed = 0; - return; - } - - if (zr->JPEG_error != 1) { - /* - * First entry: error just happened during normal operation - * - * In BUZ_MODE_MOTION_COMPRESS: - * - * Possible glitch in TV signal. In this case we should - * stop the codec and wait for good quality signal before - * restarting it to avoid further problems - * - * In BUZ_MODE_MOTION_DECOMPRESS: - * - * Bad JPEG frame: we have to mark it as processed (codec crashed - * and was not able to do it itself), and to remove it from queue. - */ - btand(~ZR36057_JMC_Go_en, ZR36057_JMC); - udelay(1); - stat = stat | (post_office_read(zr, 7, 0) & 3) << 8; - btwrite(0, ZR36057_JPC); - btor(ZR36057_MCTCR_CFlush, ZR36057_MCTCR); - jpeg_codec_reset(zr); - jpeg_codec_sleep(zr, 1); - zr->JPEG_error = 1; - zr->num_errors++; - - /* Report error */ - if (zr36067_debug > 1 && zr->num_errors <= 8) { - long frame; - frame = - zr->jpg_pend[zr->jpg_dma_tail & BUZ_MASK_FRAME]; - printk(KERN_ERR - "%s: JPEG error stat=0x%08x(0x%08x) queue_state=%ld/%ld/%ld/%ld seq=%ld frame=%ld. Codec stopped. ", - ZR_DEVNAME(zr), stat, zr->last_isr, - zr->jpg_que_tail, zr->jpg_dma_tail, - zr->jpg_dma_head, zr->jpg_que_head, - zr->jpg_seq_num, frame); - printk("stat_com frames:"); - { - int i, j; - for (j = 0; j < BUZ_NUM_STAT_COM; j++) { - for (i = 0; - i < zr->jpg_buffers.num_buffers; - i++) { - if (le32_to_cpu(zr->stat_com[j]) == - zr->jpg_buffers. - buffer[i]. - frag_tab_bus) { - printk("% d->%d", - j, i); - } - } - } - printk("\n"); - } - } - /* Find an entry in stat_com and rotate contents */ - { - int i; - - if (zr->jpg_settings.TmpDcm == 1) - i = (zr->jpg_dma_tail - - zr->jpg_err_shift) & BUZ_MASK_STAT_COM; - else - i = ((zr->jpg_dma_tail - - zr->jpg_err_shift) & 1) * 2; - if (zr->codec_mode == BUZ_MODE_MOTION_DECOMPRESS) { - /* Mimic zr36067 operation */ - zr->stat_com[i] |= cpu_to_le32(1); - if (zr->jpg_settings.TmpDcm != 1) - zr->stat_com[i + 1] |= cpu_to_le32(1); - /* Refill */ - zoran_reap_stat_com(zr); - zoran_feed_stat_com(zr); - wake_up_interruptible(&zr->jpg_capq); - /* Find an entry in stat_com again after refill */ - if (zr->jpg_settings.TmpDcm == 1) - i = (zr->jpg_dma_tail - - zr->jpg_err_shift) & - BUZ_MASK_STAT_COM; - else - i = ((zr->jpg_dma_tail - - zr->jpg_err_shift) & 1) * 2; - } - if (i) { - /* Rotate stat_comm entries to make current entry first */ - int j; - __le32 bus_addr[BUZ_NUM_STAT_COM]; - - /* Here we are copying the stat_com array, which - * is already in little endian format, so - * no endian conversions here - */ - memcpy(bus_addr, zr->stat_com, - sizeof(bus_addr)); - for (j = 0; j < BUZ_NUM_STAT_COM; j++) { - zr->stat_com[j] = - bus_addr[(i + j) & - BUZ_MASK_STAT_COM]; - - } - zr->jpg_err_shift += i; - zr->jpg_err_shift &= BUZ_MASK_STAT_COM; - } - if (zr->codec_mode == BUZ_MODE_MOTION_COMPRESS) - zr->jpg_err_seq = zr->jpg_seq_num; /* + 1; */ - } - } - - /* Now the stat_comm buffer is ready for restart */ - do { - int status, mode; - - if (zr->codec_mode == BUZ_MODE_MOTION_COMPRESS) { - decoder_command(zr, DECODER_GET_STATUS, &status); - mode = CODEC_DO_COMPRESSION; - } else { - status = 0; - mode = CODEC_DO_EXPANSION; - } - if (zr->codec_mode == BUZ_MODE_MOTION_DECOMPRESS || - (status & DECODER_STATUS_GOOD)) { - /********** RESTART code *************/ - jpeg_codec_reset(zr); - zr->codec->set_mode(zr->codec, mode); - zr36057_set_jpg(zr, zr->codec_mode); - jpeg_start(zr); - - if (zr->num_errors <= 8) - dprintk(2, KERN_INFO "%s: Restart\n", - ZR_DEVNAME(zr)); - - zr->JPEG_missed = 0; - zr->JPEG_error = 2; - /********** End RESTART code ***********/ - } - } while (0); -} - -irqreturn_t -zoran_irq (int irq, - void *dev_id) -{ - u32 stat, astat; - int count; - struct zoran *zr; - unsigned long flags; - - zr = dev_id; - count = 0; - - if (zr->testing) { - /* Testing interrupts */ - spin_lock_irqsave(&zr->spinlock, flags); - while ((stat = count_reset_interrupt(zr))) { - if (count++ > 100) { - btand(~ZR36057_ICR_IntPinEn, ZR36057_ICR); - dprintk(1, - KERN_ERR - "%s: IRQ lockup while testing, isr=0x%08x, cleared int mask\n", - ZR_DEVNAME(zr), stat); - wake_up_interruptible(&zr->test_q); - } - } - zr->last_isr = stat; - spin_unlock_irqrestore(&zr->spinlock, flags); - return IRQ_HANDLED; - } - - spin_lock_irqsave(&zr->spinlock, flags); - while (1) { - /* get/clear interrupt status bits */ - stat = count_reset_interrupt(zr); - astat = stat & IRQ_MASK; - if (!astat) { - break; - } - dprintk(4, - KERN_DEBUG - "zoran_irq: astat: 0x%08x, mask: 0x%08x\n", - astat, btread(ZR36057_ICR)); - if (astat & zr->card.vsync_int) { // SW - - if (zr->codec_mode == BUZ_MODE_MOTION_DECOMPRESS || - zr->codec_mode == BUZ_MODE_MOTION_COMPRESS) { - /* count missed interrupts */ - zr->JPEG_missed++; - } - //post_office_read(zr,1,0); - /* Interrupts may still happen when - * zr->v4l_memgrab_active is switched off. - * We simply ignore them */ - - if (zr->v4l_memgrab_active) { - - /* A lot more checks should be here ... */ - if ((btread(ZR36057_VSSFGR) & - ZR36057_VSSFGR_SnapShot) == 0) - dprintk(1, - KERN_WARNING - "%s: BuzIRQ with SnapShot off ???\n", - ZR_DEVNAME(zr)); - - if (zr->v4l_grab_frame != NO_GRAB_ACTIVE) { - /* There is a grab on a frame going on, check if it has finished */ - - if ((btread(ZR36057_VSSFGR) & - ZR36057_VSSFGR_FrameGrab) == - 0) { - /* it is finished, notify the user */ - - zr->v4l_buffers.buffer[zr->v4l_grab_frame].state = BUZ_STATE_DONE; - zr->v4l_buffers.buffer[zr->v4l_grab_frame].bs.seq = zr->v4l_grab_seq; - do_gettimeofday(&zr->v4l_buffers.buffer[zr->v4l_grab_frame].bs.timestamp); - zr->v4l_grab_frame = NO_GRAB_ACTIVE; - zr->v4l_pend_tail++; - } - } - - if (zr->v4l_grab_frame == NO_GRAB_ACTIVE) - wake_up_interruptible(&zr->v4l_capq); - - /* Check if there is another grab queued */ - - if (zr->v4l_grab_frame == NO_GRAB_ACTIVE && - zr->v4l_pend_tail != zr->v4l_pend_head) { - - int frame = zr->v4l_pend[zr->v4l_pend_tail & - V4L_MASK_FRAME]; - u32 reg; - - zr->v4l_grab_frame = frame; - - /* Set zr36057 video front end and enable video */ - - /* Buffer address */ - - reg = - zr->v4l_buffers.buffer[frame]. - fbuffer_bus; - btwrite(reg, ZR36057_VDTR); - if (zr->v4l_settings.height > - BUZ_MAX_HEIGHT / 2) - reg += - zr->v4l_settings. - bytesperline; - btwrite(reg, ZR36057_VDBR); - - /* video stride, status, and frame grab register */ - reg = 0; - if (zr->v4l_settings.height > - BUZ_MAX_HEIGHT / 2) - reg += - zr->v4l_settings. - bytesperline; - reg = - (reg << - ZR36057_VSSFGR_DispStride); - reg |= ZR36057_VSSFGR_VidOvf; - reg |= ZR36057_VSSFGR_SnapShot; - reg |= ZR36057_VSSFGR_FrameGrab; - btwrite(reg, ZR36057_VSSFGR); - - btor(ZR36057_VDCR_VidEn, - ZR36057_VDCR); - } - } - - /* even if we don't grab, we do want to increment - * the sequence counter to see lost frames */ - zr->v4l_grab_seq++; - } -#if (IRQ_MASK & ZR36057_ISR_CodRepIRQ) - if (astat & ZR36057_ISR_CodRepIRQ) { - zr->intr_counter_CodRepIRQ++; - IDEBUG(printk - (KERN_DEBUG "%s: ZR36057_ISR_CodRepIRQ\n", - ZR_DEVNAME(zr))); - btand(~ZR36057_ICR_CodRepIRQ, ZR36057_ICR); - } -#endif /* (IRQ_MASK & ZR36057_ISR_CodRepIRQ) */ - -#if (IRQ_MASK & ZR36057_ISR_JPEGRepIRQ) - if (astat & ZR36057_ISR_JPEGRepIRQ) { - - if (zr->codec_mode == BUZ_MODE_MOTION_DECOMPRESS || - zr->codec_mode == BUZ_MODE_MOTION_COMPRESS) { - if (zr36067_debug > 1 && - (!zr->frame_num || zr->JPEG_error)) { - printk(KERN_INFO - "%s: first frame ready: state=0x%08x odd_even=%d field_per_buff=%d delay=%d\n", - ZR_DEVNAME(zr), stat, - zr->jpg_settings.odd_even, - zr->jpg_settings. - field_per_buff, - zr->JPEG_missed); - { - char sc[] = "0000"; - char sv[5]; - int i; - strcpy(sv, sc); - for (i = 0; i < 4; i++) { - if (le32_to_cpu(zr->stat_com[i]) & 1) - sv[i] = '1'; - } - sv[4] = 0; - printk(KERN_INFO - "%s: stat_com=%s queue_state=%ld/%ld/%ld/%ld\n", - ZR_DEVNAME(zr), sv, - zr->jpg_que_tail, - zr->jpg_dma_tail, - zr->jpg_dma_head, - zr->jpg_que_head); - } - } else { - if (zr->JPEG_missed > zr->JPEG_max_missed) // Get statistics - zr->JPEG_max_missed = - zr->JPEG_missed; - if (zr->JPEG_missed < - zr->JPEG_min_missed) - zr->JPEG_min_missed = - zr->JPEG_missed; - } - - if (zr36067_debug > 2 && zr->frame_num < 6) { - int i; - printk("%s: seq=%ld stat_com:", - ZR_DEVNAME(zr), zr->jpg_seq_num); - for (i = 0; i < 4; i++) { - printk(" %08x", - le32_to_cpu(zr->stat_com[i])); - } - printk("\n"); - } - zr->frame_num++; - zr->JPEG_missed = 0; - zr->JPEG_error = 0; - zoran_reap_stat_com(zr); - zoran_feed_stat_com(zr); - wake_up_interruptible(&zr->jpg_capq); - } /*else { - dprintk(1, - KERN_ERR - "%s: JPEG interrupt while not in motion (de)compress mode!\n", - ZR_DEVNAME(zr)); - }*/ - } -#endif /* (IRQ_MASK & ZR36057_ISR_JPEGRepIRQ) */ - - /* DATERR, too many fields missed, error processing */ - if ((astat & zr->card.jpeg_int) || - zr->JPEG_missed > 25 || - zr->JPEG_error == 1 || - ((zr->codec_mode == BUZ_MODE_MOTION_DECOMPRESS) && - (zr->frame_num & (zr->JPEG_missed > - zr->jpg_settings.field_per_buff)))) { - error_handler(zr, astat, stat); - } - - count++; - if (count > 10) { - dprintk(2, KERN_WARNING "%s: irq loop %d\n", - ZR_DEVNAME(zr), count); - if (count > 20) { - btand(~ZR36057_ICR_IntPinEn, ZR36057_ICR); - dprintk(2, - KERN_ERR - "%s: IRQ lockup, cleared int mask\n", - ZR_DEVNAME(zr)); - break; - } - } - zr->last_isr = stat; - } - spin_unlock_irqrestore(&zr->spinlock, flags); - - return IRQ_HANDLED; -} - -void -zoran_set_pci_master (struct zoran *zr, - int set_master) -{ - if (set_master) { - pci_set_master(zr->pci_dev); - } else { - u16 command; - - pci_read_config_word(zr->pci_dev, PCI_COMMAND, &command); - command &= ~PCI_COMMAND_MASTER; - pci_write_config_word(zr->pci_dev, PCI_COMMAND, command); - } -} - -void -zoran_init_hardware (struct zoran *zr) -{ - int j, zero = 0; - - /* Enable bus-mastering */ - zoran_set_pci_master(zr, 1); - - /* Initialize the board */ - if (zr->card.init) { - zr->card.init(zr); - } - - j = zr->card.input[zr->input].muxsel; - - decoder_command(zr, 0, NULL); - decoder_command(zr, DECODER_SET_NORM, &zr->norm); - decoder_command(zr, DECODER_SET_INPUT, &j); - - encoder_command(zr, 0, NULL); - encoder_command(zr, ENCODER_SET_NORM, &zr->norm); - encoder_command(zr, ENCODER_SET_INPUT, &zero); - - /* toggle JPEG codec sleep to sync PLL */ - jpeg_codec_sleep(zr, 1); - jpeg_codec_sleep(zr, 0); - - /* set individual interrupt enables (without GIRQ1) - * but don't global enable until zoran_open() */ - - //btwrite(IRQ_MASK & ~ZR36057_ISR_GIRQ1, ZR36057_ICR); // SW - // It looks like using only JPEGRepIRQEn is not always reliable, - // may be when JPEG codec crashes it won't generate IRQ? So, - /*CP*/ // btwrite(IRQ_MASK, ZR36057_ICR); // Enable Vsync interrupts too. SM WHY ? LP - zr36057_init_vfe(zr); - - zr36057_enable_jpg(zr, BUZ_MODE_IDLE); - - btwrite(IRQ_MASK, ZR36057_ISR); // Clears interrupts -} - -void -zr36057_restart (struct zoran *zr) -{ - btwrite(0, ZR36057_SPGPPCR); - mdelay(1); - btor(ZR36057_SPGPPCR_SoftReset, ZR36057_SPGPPCR); - mdelay(1); - - /* assert P_Reset */ - btwrite(0, ZR36057_JPC); - /* set up GPIO direction - all output */ - btwrite(ZR36057_SPGPPCR_SoftReset | 0, ZR36057_SPGPPCR); - - /* set up GPIO pins and guest bus timing */ - btwrite((0x81 << 24) | 0x8888, ZR36057_GPPGCR1); -} - -/* - * initialize video front end - */ - -static void -zr36057_init_vfe (struct zoran *zr) -{ - u32 reg; - - reg = btread(ZR36057_VFESPFR); - reg |= ZR36057_VFESPFR_LittleEndian; - reg &= ~ZR36057_VFESPFR_VCLKPol; - reg |= ZR36057_VFESPFR_ExtFl; - reg |= ZR36057_VFESPFR_TopField; - btwrite(reg, ZR36057_VFESPFR); - reg = btread(ZR36057_VDCR); - if (pci_pci_problems & PCIPCI_TRITON) - // || zr->revision < 1) // Revision 1 has also Triton support - reg &= ~ZR36057_VDCR_Triton; - else - reg |= ZR36057_VDCR_Triton; - btwrite(reg, ZR36057_VDCR); -} - -/* - * Interface to decoder and encoder chips using i2c bus - */ - -int -decoder_command (struct zoran *zr, - int cmd, - void *data) -{ - if (zr->decoder == NULL) - return -EIO; - - if (zr->card.type == LML33 && - (cmd == DECODER_SET_NORM || cmd == DECODER_SET_INPUT)) { - int res; - - // Bt819 needs to reset its FIFO buffer using #FRST pin and - // LML33 card uses GPIO(7) for that. - GPIO(zr, 7, 0); - res = zr->decoder->driver->command(zr->decoder, cmd, data); - // Pull #FRST high. - GPIO(zr, 7, 1); - return res; - } else - return zr->decoder->driver->command(zr->decoder, cmd, - data); -} - -int -encoder_command (struct zoran *zr, - int cmd, - void *data) -{ - if (zr->encoder == NULL) - return -1; - - return zr->encoder->driver->command(zr->encoder, cmd, data); -} diff --git a/drivers/media/video/zoran_device.h b/drivers/media/video/zoran_device.h deleted file mode 100644 index 74c6c8e..0000000 --- a/drivers/media/video/zoran_device.h +++ /dev/null @@ -1,97 +0,0 @@ -/* - * Zoran zr36057/zr36067 PCI controller driver, for the - * Pinnacle/Miro DC10/DC10+/DC30/DC30+, Iomega Buz, Linux - * Media Labs LML33/LML33R10. - * - * This part handles card-specific data and detection - * - * Copyright (C) 2000 Serguei Miridonov - * - * Currently maintained by: - * Ronald Bultje - * Laurent Pinchart - * Mailinglist - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#ifndef __ZORAN_DEVICE_H__ -#define __ZORAN_DEVICE_H__ - -/* general purpose I/O */ -extern void GPIO(struct zoran *zr, - int bit, - unsigned int value); - -/* codec (or actually: guest bus) access */ -extern int post_office_wait(struct zoran *zr); -extern int post_office_write(struct zoran *zr, - unsigned guest, - unsigned reg, - unsigned value); -extern int post_office_read(struct zoran *zr, - unsigned guest, - unsigned reg); - -extern void detect_guest_activity(struct zoran *zr); - -extern void jpeg_codec_sleep(struct zoran *zr, - int sleep); -extern int jpeg_codec_reset(struct zoran *zr); - -/* zr360x7 access to raw capture */ -extern void zr36057_overlay(struct zoran *zr, - int on); -extern void write_overlay_mask(struct file *file, - struct video_clip *vp, - int count); -extern void zr36057_set_memgrab(struct zoran *zr, - int mode); -extern int wait_grab_pending(struct zoran *zr); - -/* interrupts */ -extern void print_interrupts(struct zoran *zr); -extern void clear_interrupt_counters(struct zoran *zr); -extern irqreturn_t zoran_irq(int irq, void *dev_id); - -/* JPEG codec access */ -extern void jpeg_start(struct zoran *zr); -extern void zr36057_enable_jpg(struct zoran *zr, - enum zoran_codec_mode mode); -extern void zoran_feed_stat_com(struct zoran *zr); - -/* general */ -extern void zoran_set_pci_master(struct zoran *zr, - int set_master); -extern void zoran_init_hardware(struct zoran *zr); -extern void zr36057_restart(struct zoran *zr); - -extern const struct zoran_format zoran_formats[]; - -extern int v4l_nbufs; -extern int v4l_bufsize; -extern int jpg_nbufs; -extern int jpg_bufsize; -extern int pass_through; - -/* i2c */ -extern int decoder_command(struct zoran *zr, - int cmd, - void *data); -extern int encoder_command(struct zoran *zr, - int cmd, - void *data); - -#endif /* __ZORAN_DEVICE_H__ */ diff --git a/drivers/media/video/zoran_driver.c b/drivers/media/video/zoran_driver.c deleted file mode 100644 index 25de763..0000000 --- a/drivers/media/video/zoran_driver.c +++ /dev/null @@ -1,4649 +0,0 @@ -/* - * Zoran zr36057/zr36067 PCI controller driver, for the - * Pinnacle/Miro DC10/DC10+/DC30/DC30+, Iomega Buz, Linux - * Media Labs LML33/LML33R10. - * - * Copyright (C) 2000 Serguei Miridonov - * - * Changes for BUZ by Wolfgang Scherr - * - * Changes for DC10/DC30 by Laurent Pinchart - * - * Changes for LML33R10 by Maxim Yevtyushkin - * - * Changes for videodev2/v4l2 by Ronald Bultje - * - * Based on - * - * Miro DC10 driver - * Copyright (C) 1999 Wolfgang Scherr - * - * Iomega Buz driver version 1.0 - * Copyright (C) 1999 Rainer Johanni - * - * buz.0.0.3 - * Copyright (C) 1998 Dave Perks - * - * bttv - Bt848 frame grabber driver - * Copyright (C) 1996,97,98 Ralph Metzler (rjkm@thp.uni-koeln.de) - * & Marcus Metzler (mocm@thp.uni-koeln.de) - * - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include - -#include -#define MAP_NR(x) virt_to_page(x) -#define ZORAN_VID_TYPE ( \ - VID_TYPE_CAPTURE | \ - VID_TYPE_OVERLAY | \ - VID_TYPE_CLIPPING | \ - VID_TYPE_FRAMERAM | \ - VID_TYPE_SCALES | \ - VID_TYPE_MJPEG_DECODER | \ - VID_TYPE_MJPEG_ENCODER \ - ) - -#include -#include -#include -#include "videocodec.h" - -#include -#include -#include -#include - -#include -#include -#include -#include "zoran.h" -#include "zoran_device.h" -#include "zoran_card.h" - - /* we declare some card type definitions here, they mean - * the same as the v4l1 ZORAN_VID_TYPE above, except it's v4l2 */ -#define ZORAN_V4L2_VID_FLAGS ( \ - V4L2_CAP_STREAMING |\ - V4L2_CAP_VIDEO_CAPTURE |\ - V4L2_CAP_VIDEO_OUTPUT |\ - V4L2_CAP_VIDEO_OVERLAY \ - ) - - -#if defined(CONFIG_VIDEO_V4L1_COMPAT) -#define ZFMT(pal, fcc, cs) \ - .palette = (pal), .fourcc = (fcc), .colorspace = (cs) -#else -#define ZFMT(pal, fcc, cs) \ - .fourcc = (fcc), .colorspace = (cs) -#endif - -const struct zoran_format zoran_formats[] = { - { - .name = "15-bit RGB LE", - ZFMT(VIDEO_PALETTE_RGB555, - V4L2_PIX_FMT_RGB555, V4L2_COLORSPACE_SRGB), - .depth = 15, - .flags = ZORAN_FORMAT_CAPTURE | - ZORAN_FORMAT_OVERLAY, - .vfespfr = ZR36057_VFESPFR_RGB555|ZR36057_VFESPFR_ErrDif| - ZR36057_VFESPFR_LittleEndian, - }, { - .name = "15-bit RGB BE", - ZFMT(-1, - V4L2_PIX_FMT_RGB555X, V4L2_COLORSPACE_SRGB), - .depth = 15, - .flags = ZORAN_FORMAT_CAPTURE | - ZORAN_FORMAT_OVERLAY, - .vfespfr = ZR36057_VFESPFR_RGB555|ZR36057_VFESPFR_ErrDif, - }, { - .name = "16-bit RGB LE", - ZFMT(VIDEO_PALETTE_RGB565, - V4L2_PIX_FMT_RGB565, V4L2_COLORSPACE_SRGB), - .depth = 16, - .flags = ZORAN_FORMAT_CAPTURE | - ZORAN_FORMAT_OVERLAY, - .vfespfr = ZR36057_VFESPFR_RGB565|ZR36057_VFESPFR_ErrDif| - ZR36057_VFESPFR_LittleEndian, - }, { - .name = "16-bit RGB BE", - ZFMT(-1, - V4L2_PIX_FMT_RGB565X, V4L2_COLORSPACE_SRGB), - .depth = 16, - .flags = ZORAN_FORMAT_CAPTURE | - ZORAN_FORMAT_OVERLAY, - .vfespfr = ZR36057_VFESPFR_RGB565|ZR36057_VFESPFR_ErrDif, - }, { - .name = "24-bit RGB", - ZFMT(VIDEO_PALETTE_RGB24, - V4L2_PIX_FMT_BGR24, V4L2_COLORSPACE_SRGB), - .depth = 24, - .flags = ZORAN_FORMAT_CAPTURE | - ZORAN_FORMAT_OVERLAY, - .vfespfr = ZR36057_VFESPFR_RGB888|ZR36057_VFESPFR_Pack24, - }, { - .name = "32-bit RGB LE", - ZFMT(VIDEO_PALETTE_RGB32, - V4L2_PIX_FMT_BGR32, V4L2_COLORSPACE_SRGB), - .depth = 32, - .flags = ZORAN_FORMAT_CAPTURE | - ZORAN_FORMAT_OVERLAY, - .vfespfr = ZR36057_VFESPFR_RGB888|ZR36057_VFESPFR_LittleEndian, - }, { - .name = "32-bit RGB BE", - ZFMT(-1, - V4L2_PIX_FMT_RGB32, V4L2_COLORSPACE_SRGB), - .depth = 32, - .flags = ZORAN_FORMAT_CAPTURE | - ZORAN_FORMAT_OVERLAY, - .vfespfr = ZR36057_VFESPFR_RGB888, - }, { - .name = "4:2:2, packed, YUYV", - ZFMT(VIDEO_PALETTE_YUV422, - V4L2_PIX_FMT_YUYV, V4L2_COLORSPACE_SMPTE170M), - .depth = 16, - .flags = ZORAN_FORMAT_CAPTURE | - ZORAN_FORMAT_OVERLAY, - .vfespfr = ZR36057_VFESPFR_YUV422, - }, { - .name = "4:2:2, packed, UYVY", - ZFMT(VIDEO_PALETTE_UYVY, - V4L2_PIX_FMT_UYVY, V4L2_COLORSPACE_SMPTE170M), - .depth = 16, - .flags = ZORAN_FORMAT_CAPTURE | - ZORAN_FORMAT_OVERLAY, - .vfespfr = ZR36057_VFESPFR_YUV422|ZR36057_VFESPFR_LittleEndian, - }, { - .name = "Hardware-encoded Motion-JPEG", - ZFMT(-1, - V4L2_PIX_FMT_MJPEG, V4L2_COLORSPACE_SMPTE170M), - .depth = 0, - .flags = ZORAN_FORMAT_CAPTURE | - ZORAN_FORMAT_PLAYBACK | - ZORAN_FORMAT_COMPRESSED, - } -}; -#define NUM_FORMATS ARRAY_SIZE(zoran_formats) - -// RJ: Test only - want to test BUZ_USE_HIMEM even when CONFIG_BIGPHYS_AREA is defined - - -static int lock_norm; /* 0 = default 1 = Don't change TV standard (norm) */ -module_param(lock_norm, int, 0644); -MODULE_PARM_DESC(lock_norm, "Prevent norm changes (1 = ignore, >1 = fail)"); - - /* small helper function for calculating buffersizes for v4l2 - * we calculate the nearest higher power-of-two, which - * will be the recommended buffersize */ -static __u32 -zoran_v4l2_calc_bufsize (struct zoran_jpg_settings *settings) -{ - __u8 div = settings->VerDcm * settings->HorDcm * settings->TmpDcm; - __u32 num = (1024 * 512) / (div); - __u32 result = 2; - - num--; - while (num) { - num >>= 1; - result <<= 1; - } - - if (result > jpg_bufsize) - return jpg_bufsize; - if (result < 8192) - return 8192; - return result; -} - -/* forward references */ -static void v4l_fbuffer_free(struct file *file); -static void jpg_fbuffer_free(struct file *file); - -/* - * Allocate the V4L grab buffers - * - * These have to be pysically contiguous. - * If v4l_bufsize <= MAX_KMALLOC_MEM we use kmalloc - * else we try to allocate them with bigphysarea_alloc_pages - * if the bigphysarea patch is present in the kernel, - * else we try to use high memory (if the user has bootet - * Linux with the necessary memory left over). - */ - -static unsigned long -get_high_mem (unsigned long size) -{ -/* - * Check if there is usable memory at the end of Linux memory - * of at least size. Return the physical address of this memory, - * return 0 on failure. - * - * The idea is from Alexandro Rubini's book "Linux device drivers". - * The driver from him which is downloadable from O'Reilly's - * web site misses the "virt_to_phys(high_memory)" part - * (and therefore doesn't work at all - at least with 2.2.x kernels). - * - * It should be unnecessary to mention that THIS IS DANGEROUS, - * if more than one driver at a time has the idea to use this memory!!!! - */ - - volatile unsigned char __iomem *mem; - unsigned char c; - unsigned long hi_mem_ph; - unsigned long i; - - /* Map the high memory to user space */ - - hi_mem_ph = virt_to_phys(high_memory); - - mem = ioremap(hi_mem_ph, size); - if (!mem) { - dprintk(1, - KERN_ERR "%s: get_high_mem() - ioremap failed\n", - ZORAN_NAME); - return 0; - } - - for (i = 0; i < size; i++) { - /* Check if it is memory */ - c = i & 0xff; - writeb(c, mem + i); - if (readb(mem + i) != c) - break; - c = 255 - c; - writeb(c, mem + i); - if (readb(mem + i) != c) - break; - writeb(0, mem + i); /* zero out memory */ - - /* give the kernel air to breath */ - if ((i & 0x3ffff) == 0x3ffff) - schedule(); - } - - iounmap(mem); - - if (i != size) { - dprintk(1, - KERN_ERR - "%s: get_high_mem() - requested %lu, avail %lu\n", - ZORAN_NAME, size, i); - return 0; - } - - return hi_mem_ph; -} - -static int -v4l_fbuffer_alloc (struct file *file) -{ - struct zoran_fh *fh = file->private_data; - struct zoran *zr = fh->zr; - int i, off; - unsigned char *mem; - unsigned long pmem = 0; - - /* we might have old buffers lying around... */ - if (fh->v4l_buffers.ready_to_be_freed) { - v4l_fbuffer_free(file); - } - - for (i = 0; i < fh->v4l_buffers.num_buffers; i++) { - if (fh->v4l_buffers.buffer[i].fbuffer) - dprintk(2, - KERN_WARNING - "%s: v4l_fbuffer_alloc() - buffer %d allready allocated!?\n", - ZR_DEVNAME(zr), i); - - //udelay(20); - if (fh->v4l_buffers.buffer_size <= MAX_KMALLOC_MEM) { - /* Use kmalloc */ - - mem = kmalloc(fh->v4l_buffers.buffer_size, GFP_KERNEL); - if (!mem) { - dprintk(1, - KERN_ERR - "%s: v4l_fbuffer_alloc() - kmalloc for V4L buf %d failed\n", - ZR_DEVNAME(zr), i); - v4l_fbuffer_free(file); - return -ENOBUFS; - } - fh->v4l_buffers.buffer[i].fbuffer = mem; - fh->v4l_buffers.buffer[i].fbuffer_phys = - virt_to_phys(mem); - fh->v4l_buffers.buffer[i].fbuffer_bus = - virt_to_bus(mem); - for (off = 0; off < fh->v4l_buffers.buffer_size; - off += PAGE_SIZE) - SetPageReserved(MAP_NR(mem + off)); - dprintk(4, - KERN_INFO - "%s: v4l_fbuffer_alloc() - V4L frame %d mem 0x%lx (bus: 0x%lx)\n", - ZR_DEVNAME(zr), i, (unsigned long) mem, - virt_to_bus(mem)); - } else { - - /* Use high memory which has been left at boot time */ - - /* Ok., Ok. this is an evil hack - we make - * the assumption that physical addresses are - * the same as bus addresses (true at least - * for Intel processors). The whole method of - * obtaining and using this memory is not very - * nice - but I hope it saves some poor users - * from kernel hacking, which might have even - * more evil results */ - - if (i == 0) { - int size = - fh->v4l_buffers.num_buffers * - fh->v4l_buffers.buffer_size; - - pmem = get_high_mem(size); - if (pmem == 0) { - dprintk(1, - KERN_ERR - "%s: v4l_fbuffer_alloc() - get_high_mem (size = %d KB) for V4L bufs failed\n", - ZR_DEVNAME(zr), size >> 10); - return -ENOBUFS; - } - fh->v4l_buffers.buffer[0].fbuffer = NULL; - fh->v4l_buffers.buffer[0].fbuffer_phys = pmem; - fh->v4l_buffers.buffer[0].fbuffer_bus = pmem; - dprintk(4, - KERN_INFO - "%s: v4l_fbuffer_alloc() - using %d KB high memory\n", - ZR_DEVNAME(zr), size >> 10); - } else { - fh->v4l_buffers.buffer[i].fbuffer = NULL; - fh->v4l_buffers.buffer[i].fbuffer_phys = - pmem + i * fh->v4l_buffers.buffer_size; - fh->v4l_buffers.buffer[i].fbuffer_bus = - pmem + i * fh->v4l_buffers.buffer_size; - } - } - } - - fh->v4l_buffers.allocated = 1; - - return 0; -} - -/* free the V4L grab buffers */ -static void -v4l_fbuffer_free (struct file *file) -{ - struct zoran_fh *fh = file->private_data; - struct zoran *zr = fh->zr; - int i, off; - unsigned char *mem; - - dprintk(4, KERN_INFO "%s: v4l_fbuffer_free()\n", ZR_DEVNAME(zr)); - - for (i = 0; i < fh->v4l_buffers.num_buffers; i++) { - if (!fh->v4l_buffers.buffer[i].fbuffer) - continue; - - if (fh->v4l_buffers.buffer_size <= MAX_KMALLOC_MEM) { - mem = fh->v4l_buffers.buffer[i].fbuffer; - for (off = 0; off < fh->v4l_buffers.buffer_size; - off += PAGE_SIZE) - ClearPageReserved(MAP_NR(mem + off)); - kfree((void *) fh->v4l_buffers.buffer[i].fbuffer); - } - fh->v4l_buffers.buffer[i].fbuffer = NULL; - } - - fh->v4l_buffers.allocated = 0; - fh->v4l_buffers.ready_to_be_freed = 0; -} - -/* - * Allocate the MJPEG grab buffers. - * - * If the requested buffer size is smaller than MAX_KMALLOC_MEM, - * kmalloc is used to request a physically contiguous area, - * else we allocate the memory in framgents with get_zeroed_page. - * - * If a Natoma chipset is present and this is a revision 1 zr36057, - * each MJPEG buffer needs to be physically contiguous. - * (RJ: This statement is from Dave Perks' original driver, - * I could never check it because I have a zr36067) - * The driver cares about this because it reduces the buffer - * size to MAX_KMALLOC_MEM in that case (which forces contiguous allocation). - * - * RJ: The contents grab buffers needs never be accessed in the driver. - * Therefore there is no need to allocate them with vmalloc in order - * to get a contiguous virtual memory space. - * I don't understand why many other drivers first allocate them with - * vmalloc (which uses internally also get_zeroed_page, but delivers you - * virtual addresses) and then again have to make a lot of efforts - * to get the physical address. - * - * Ben Capper: - * On big-endian architectures (such as ppc) some extra steps - * are needed. When reading and writing to the stat_com array - * and fragment buffers, the device expects to see little- - * endian values. The use of cpu_to_le32() and le32_to_cpu() - * in this function (and one or two others in zoran_device.c) - * ensure that these values are always stored in little-endian - * form, regardless of architecture. The zr36057 does Very Bad - * Things on big endian architectures if the stat_com array - * and fragment buffers are not little-endian. - */ - -static int -jpg_fbuffer_alloc (struct file *file) -{ - struct zoran_fh *fh = file->private_data; - struct zoran *zr = fh->zr; - int i, j, off; - unsigned long mem; - - /* we might have old buffers lying around */ - if (fh->jpg_buffers.ready_to_be_freed) { - jpg_fbuffer_free(file); - } - - for (i = 0; i < fh->jpg_buffers.num_buffers; i++) { - if (fh->jpg_buffers.buffer[i].frag_tab) - dprintk(2, - KERN_WARNING - "%s: jpg_fbuffer_alloc() - buffer %d allready allocated!?\n", - ZR_DEVNAME(zr), i); - - /* Allocate fragment table for this buffer */ - - mem = get_zeroed_page(GFP_KERNEL); - if (mem == 0) { - dprintk(1, - KERN_ERR - "%s: jpg_fbuffer_alloc() - get_zeroed_page (frag_tab) failed for buffer %d\n", - ZR_DEVNAME(zr), i); - jpg_fbuffer_free(file); - return -ENOBUFS; - } - fh->jpg_buffers.buffer[i].frag_tab = (__le32 *) mem; - fh->jpg_buffers.buffer[i].frag_tab_bus = - virt_to_bus((void *) mem); - - //if (alloc_contig) { - if (fh->jpg_buffers.need_contiguous) { - mem = - (unsigned long) kmalloc(fh->jpg_buffers. - buffer_size, - GFP_KERNEL); - if (mem == 0) { - dprintk(1, - KERN_ERR - "%s: jpg_fbuffer_alloc() - kmalloc failed for buffer %d\n", - ZR_DEVNAME(zr), i); - jpg_fbuffer_free(file); - return -ENOBUFS; - } - fh->jpg_buffers.buffer[i].frag_tab[0] = - cpu_to_le32(virt_to_bus((void *) mem)); - fh->jpg_buffers.buffer[i].frag_tab[1] = - cpu_to_le32(((fh->jpg_buffers.buffer_size / 4) << 1) | 1); - for (off = 0; off < fh->jpg_buffers.buffer_size; - off += PAGE_SIZE) - SetPageReserved(MAP_NR(mem + off)); - } else { - /* jpg_bufsize is allreay page aligned */ - for (j = 0; - j < fh->jpg_buffers.buffer_size / PAGE_SIZE; - j++) { - mem = get_zeroed_page(GFP_KERNEL); - if (mem == 0) { - dprintk(1, - KERN_ERR - "%s: jpg_fbuffer_alloc() - get_zeroed_page failed for buffer %d\n", - ZR_DEVNAME(zr), i); - jpg_fbuffer_free(file); - return -ENOBUFS; - } - - fh->jpg_buffers.buffer[i].frag_tab[2 * j] = - cpu_to_le32(virt_to_bus((void *) mem)); - fh->jpg_buffers.buffer[i].frag_tab[2 * j + - 1] = - cpu_to_le32((PAGE_SIZE / 4) << 1); - SetPageReserved(MAP_NR(mem)); - } - - fh->jpg_buffers.buffer[i].frag_tab[2 * j - 1] |= cpu_to_le32(1); - } - } - - dprintk(4, - KERN_DEBUG "%s: jpg_fbuffer_alloc() - %d KB allocated\n", - ZR_DEVNAME(zr), - (fh->jpg_buffers.num_buffers * - fh->jpg_buffers.buffer_size) >> 10); - - fh->jpg_buffers.allocated = 1; - - return 0; -} - -/* free the MJPEG grab buffers */ -static void -jpg_fbuffer_free (struct file *file) -{ - struct zoran_fh *fh = file->private_data; - struct zoran *zr = fh->zr; - int i, j, off; - unsigned char *mem; - - dprintk(4, KERN_DEBUG "%s: jpg_fbuffer_free()\n", ZR_DEVNAME(zr)); - - for (i = 0; i < fh->jpg_buffers.num_buffers; i++) { - if (!fh->jpg_buffers.buffer[i].frag_tab) - continue; - - //if (alloc_contig) { - if (fh->jpg_buffers.need_contiguous) { - if (fh->jpg_buffers.buffer[i].frag_tab[0]) { - mem = (unsigned char *) bus_to_virt(le32_to_cpu( - fh->jpg_buffers.buffer[i].frag_tab[0])); - for (off = 0; - off < fh->jpg_buffers.buffer_size; - off += PAGE_SIZE) - ClearPageReserved(MAP_NR - (mem + off)); - kfree(mem); - fh->jpg_buffers.buffer[i].frag_tab[0] = 0; - fh->jpg_buffers.buffer[i].frag_tab[1] = 0; - } - } else { - for (j = 0; - j < fh->jpg_buffers.buffer_size / PAGE_SIZE; - j++) { - if (!fh->jpg_buffers.buffer[i]. - frag_tab[2 * j]) - break; - ClearPageReserved(MAP_NR - (bus_to_virt - (le32_to_cpu - (fh->jpg_buffers. - buffer[i].frag_tab[2 * - j])))); - free_page((unsigned long) - bus_to_virt - (le32_to_cpu - (fh->jpg_buffers. - buffer[i]. - frag_tab[2 * j]))); - fh->jpg_buffers.buffer[i].frag_tab[2 * j] = - 0; - fh->jpg_buffers.buffer[i].frag_tab[2 * j + - 1] = 0; - } - } - - free_page((unsigned long) fh->jpg_buffers.buffer[i]. - frag_tab); - fh->jpg_buffers.buffer[i].frag_tab = NULL; - } - - fh->jpg_buffers.allocated = 0; - fh->jpg_buffers.ready_to_be_freed = 0; -} - -/* - * V4L Buffer grabbing - */ - -static int -zoran_v4l_set_format (struct file *file, - int width, - int height, - const struct zoran_format *format) -{ - struct zoran_fh *fh = file->private_data; - struct zoran *zr = fh->zr; - int bpp; - - /* Check size and format of the grab wanted */ - - if (height < BUZ_MIN_HEIGHT || width < BUZ_MIN_WIDTH || - height > BUZ_MAX_HEIGHT || width > BUZ_MAX_WIDTH) { - dprintk(1, - KERN_ERR - "%s: v4l_set_format() - wrong frame size (%dx%d)\n", - ZR_DEVNAME(zr), width, height); - return -EINVAL; - } - - bpp = (format->depth + 7) / 8; - - /* Check against available buffer size */ - if (height * width * bpp > fh->v4l_buffers.buffer_size) { - dprintk(1, - KERN_ERR - "%s: v4l_set_format() - video buffer size (%d kB) is too small\n", - ZR_DEVNAME(zr), fh->v4l_buffers.buffer_size >> 10); - return -EINVAL; - } - - /* The video front end needs 4-byte alinged line sizes */ - - if ((bpp == 2 && (width & 1)) || (bpp == 3 && (width & 3))) { - dprintk(1, - KERN_ERR - "%s: v4l_set_format() - wrong frame alingment\n", - ZR_DEVNAME(zr)); - return -EINVAL; - } - - fh->v4l_settings.width = width; - fh->v4l_settings.height = height; - fh->v4l_settings.format = format; - fh->v4l_settings.bytesperline = bpp * fh->v4l_settings.width; - - return 0; -} - -static int -zoran_v4l_queue_frame (struct file *file, - int num) -{ - struct zoran_fh *fh = file->private_data; - struct zoran *zr = fh->zr; - unsigned long flags; - int res = 0; - - if (!fh->v4l_buffers.allocated) { - dprintk(1, - KERN_ERR - "%s: v4l_queue_frame() - buffers not yet allocated\n", - ZR_DEVNAME(zr)); - res = -ENOMEM; - } - - /* No grabbing outside the buffer range! */ - if (num >= fh->v4l_buffers.num_buffers || num < 0) { - dprintk(1, - KERN_ERR - "%s: v4l_queue_frame() - buffer %d is out of range\n", - ZR_DEVNAME(zr), num); - res = -EINVAL; - } - - spin_lock_irqsave(&zr->spinlock, flags); - - if (fh->v4l_buffers.active == ZORAN_FREE) { - if (zr->v4l_buffers.active == ZORAN_FREE) { - zr->v4l_buffers = fh->v4l_buffers; - fh->v4l_buffers.active = ZORAN_ACTIVE; - } else { - dprintk(1, - KERN_ERR - "%s: v4l_queue_frame() - another session is already capturing\n", - ZR_DEVNAME(zr)); - res = -EBUSY; - } - } - - /* make sure a grab isn't going on currently with this buffer */ - if (!res) { - switch (zr->v4l_buffers.buffer[num].state) { - default: - case BUZ_STATE_PEND: - if (zr->v4l_buffers.active == ZORAN_FREE) { - fh->v4l_buffers.active = ZORAN_FREE; - zr->v4l_buffers.allocated = 0; - } - res = -EBUSY; /* what are you doing? */ - break; - case BUZ_STATE_DONE: - dprintk(2, - KERN_WARNING - "%s: v4l_queue_frame() - queueing buffer %d in state DONE!?\n", - ZR_DEVNAME(zr), num); - case BUZ_STATE_USER: - /* since there is at least one unused buffer there's room for at least - * one more pend[] entry */ - zr->v4l_pend[zr->v4l_pend_head++ & - V4L_MASK_FRAME] = num; - zr->v4l_buffers.buffer[num].state = BUZ_STATE_PEND; - zr->v4l_buffers.buffer[num].bs.length = - fh->v4l_settings.bytesperline * - zr->v4l_settings.height; - fh->v4l_buffers.buffer[num] = - zr->v4l_buffers.buffer[num]; - break; - } - } - - spin_unlock_irqrestore(&zr->spinlock, flags); - - if (!res && zr->v4l_buffers.active == ZORAN_FREE) - zr->v4l_buffers.active = fh->v4l_buffers.active; - - return res; -} - -static int -v4l_grab (struct file *file, - struct video_mmap *mp) -{ - struct zoran_fh *fh = file->private_data; - struct zoran *zr = fh->zr; - int res = 0, i; - - for (i = 0; i < NUM_FORMATS; i++) { - if (zoran_formats[i].palette == mp->format && - zoran_formats[i].flags & ZORAN_FORMAT_CAPTURE && - !(zoran_formats[i].flags & ZORAN_FORMAT_COMPRESSED)) - break; - } - if (i == NUM_FORMATS || zoran_formats[i].depth == 0) { - dprintk(1, - KERN_ERR - "%s: v4l_grab() - wrong bytes-per-pixel format\n", - ZR_DEVNAME(zr)); - return -EINVAL; - } - - /* - * To minimize the time spent in the IRQ routine, we avoid setting up - * the video front end there. - * If this grab has different parameters from a running streaming capture - * we stop the streaming capture and start it over again. - */ - if (zr->v4l_memgrab_active && - (zr->v4l_settings.width != mp->width || - zr->v4l_settings.height != mp->height || - zr->v4l_settings.format->palette != mp->format)) { - res = wait_grab_pending(zr); - if (res) - return res; - } - if ((res = zoran_v4l_set_format(file, - mp->width, - mp->height, - &zoran_formats[i]))) - return res; - zr->v4l_settings = fh->v4l_settings; - - /* queue the frame in the pending queue */ - if ((res = zoran_v4l_queue_frame(file, mp->frame))) { - fh->v4l_buffers.active = ZORAN_FREE; - return res; - } - - /* put the 36057 into frame grabbing mode */ - if (!res && !zr->v4l_memgrab_active) - zr36057_set_memgrab(zr, 1); - - //dprintk(4, KERN_INFO "%s: Frame grab 3...\n", ZR_DEVNAME(zr)); - - return res; -} - -/* - * Sync on a V4L buffer - */ - -static int -v4l_sync (struct file *file, - int frame) -{ - struct zoran_fh *fh = file->private_data; - struct zoran *zr = fh->zr; - unsigned long flags; - - if (fh->v4l_buffers.active == ZORAN_FREE) { - dprintk(1, - KERN_ERR - "%s: v4l_sync() - no grab active for this session\n", - ZR_DEVNAME(zr)); - return -EINVAL; - } - - /* check passed-in frame number */ - if (frame >= fh->v4l_buffers.num_buffers || frame < 0) { - dprintk(1, - KERN_ERR "%s: v4l_sync() - frame %d is invalid\n", - ZR_DEVNAME(zr), frame); - return -EINVAL; - } - - /* Check if is buffer was queued at all */ - if (zr->v4l_buffers.buffer[frame].state == BUZ_STATE_USER) { - dprintk(1, - KERN_ERR - "%s: v4l_sync() - attempt to sync on a buffer which was not queued?\n", - ZR_DEVNAME(zr)); - return -EPROTO; - } - - /* wait on this buffer to get ready */ - if (!wait_event_interruptible_timeout(zr->v4l_capq, - (zr->v4l_buffers.buffer[frame].state != BUZ_STATE_PEND), - 10*HZ)) - return -ETIME; - if (signal_pending(current)) - return -ERESTARTSYS; - - /* buffer should now be in BUZ_STATE_DONE */ - if (zr->v4l_buffers.buffer[frame].state != BUZ_STATE_DONE) - dprintk(2, - KERN_ERR "%s: v4l_sync() - internal state error\n", - ZR_DEVNAME(zr)); - - zr->v4l_buffers.buffer[frame].state = BUZ_STATE_USER; - fh->v4l_buffers.buffer[frame] = zr->v4l_buffers.buffer[frame]; - - spin_lock_irqsave(&zr->spinlock, flags); - - /* Check if streaming capture has finished */ - if (zr->v4l_pend_tail == zr->v4l_pend_head) { - zr36057_set_memgrab(zr, 0); - if (zr->v4l_buffers.active == ZORAN_ACTIVE) { - fh->v4l_buffers.active = zr->v4l_buffers.active = - ZORAN_FREE; - zr->v4l_buffers.allocated = 0; - } - } - - spin_unlock_irqrestore(&zr->spinlock, flags); - - return 0; -} - -/* - * Queue a MJPEG buffer for capture/playback - */ - -static int -zoran_jpg_queue_frame (struct file *file, - int num, - enum zoran_codec_mode mode) -{ - struct zoran_fh *fh = file->private_data; - struct zoran *zr = fh->zr; - unsigned long flags; - int res = 0; - - /* Check if buffers are allocated */ - if (!fh->jpg_buffers.allocated) { - dprintk(1, - KERN_ERR - "%s: jpg_queue_frame() - buffers not yet allocated\n", - ZR_DEVNAME(zr)); - return -ENOMEM; - } - - /* No grabbing outside the buffer range! */ - if (num >= fh->jpg_buffers.num_buffers || num < 0) { - dprintk(1, - KERN_ERR - "%s: jpg_queue_frame() - buffer %d out of range\n", - ZR_DEVNAME(zr), num); - return -EINVAL; - } - - /* what is the codec mode right now? */ - if (zr->codec_mode == BUZ_MODE_IDLE) { - zr->jpg_settings = fh->jpg_settings; - } else if (zr->codec_mode != mode) { - /* wrong codec mode active - invalid */ - dprintk(1, - KERN_ERR - "%s: jpg_queue_frame() - codec in wrong mode\n", - ZR_DEVNAME(zr)); - return -EINVAL; - } - - if (fh->jpg_buffers.active == ZORAN_FREE) { - if (zr->jpg_buffers.active == ZORAN_FREE) { - zr->jpg_buffers = fh->jpg_buffers; - fh->jpg_buffers.active = ZORAN_ACTIVE; - } else { - dprintk(1, - KERN_ERR - "%s: jpg_queue_frame() - another session is already capturing\n", - ZR_DEVNAME(zr)); - res = -EBUSY; - } - } - - if (!res && zr->codec_mode == BUZ_MODE_IDLE) { - /* Ok load up the jpeg codec */ - zr36057_enable_jpg(zr, mode); - } - - spin_lock_irqsave(&zr->spinlock, flags); - - if (!res) { - switch (zr->jpg_buffers.buffer[num].state) { - case BUZ_STATE_DONE: - dprintk(2, - KERN_WARNING - "%s: jpg_queue_frame() - queing frame in BUZ_STATE_DONE state!?\n", - ZR_DEVNAME(zr)); - case BUZ_STATE_USER: - /* since there is at least one unused buffer there's room for at - *least one more pend[] entry */ - zr->jpg_pend[zr->jpg_que_head++ & BUZ_MASK_FRAME] = - num; - zr->jpg_buffers.buffer[num].state = BUZ_STATE_PEND; - fh->jpg_buffers.buffer[num] = - zr->jpg_buffers.buffer[num]; - zoran_feed_stat_com(zr); - break; - default: - case BUZ_STATE_DMA: - case BUZ_STATE_PEND: - if (zr->jpg_buffers.active == ZORAN_FREE) { - fh->jpg_buffers.active = ZORAN_FREE; - zr->jpg_buffers.allocated = 0; - } - res = -EBUSY; /* what are you doing? */ - break; - } - } - - spin_unlock_irqrestore(&zr->spinlock, flags); - - if (!res && zr->jpg_buffers.active == ZORAN_FREE) { - zr->jpg_buffers.active = fh->jpg_buffers.active; - } - - return res; -} - -static int -jpg_qbuf (struct file *file, - int frame, - enum zoran_codec_mode mode) -{ - struct zoran_fh *fh = file->private_data; - struct zoran *zr = fh->zr; - int res = 0; - - /* Does the user want to stop streaming? */ - if (frame < 0) { - if (zr->codec_mode == mode) { - if (fh->jpg_buffers.active == ZORAN_FREE) { - dprintk(1, - KERN_ERR - "%s: jpg_qbuf(-1) - session not active\n", - ZR_DEVNAME(zr)); - return -EINVAL; - } - fh->jpg_buffers.active = zr->jpg_buffers.active = - ZORAN_FREE; - zr->jpg_buffers.allocated = 0; - zr36057_enable_jpg(zr, BUZ_MODE_IDLE); - return 0; - } else { - dprintk(1, - KERN_ERR - "%s: jpg_qbuf() - stop streaming but not in streaming mode\n", - ZR_DEVNAME(zr)); - return -EINVAL; - } - } - - if ((res = zoran_jpg_queue_frame(file, frame, mode))) - return res; - - /* Start the jpeg codec when the first frame is queued */ - if (!res && zr->jpg_que_head == 1) - jpeg_start(zr); - - return res; -} - -/* - * Sync on a MJPEG buffer - */ - -static int -jpg_sync (struct file *file, - struct zoran_sync *bs) -{ - struct zoran_fh *fh = file->private_data; - struct zoran *zr = fh->zr; - unsigned long flags; - int frame; - - if (fh->jpg_buffers.active == ZORAN_FREE) { - dprintk(1, - KERN_ERR - "%s: jpg_sync() - capture is not currently active\n", - ZR_DEVNAME(zr)); - return -EINVAL; - } - if (zr->codec_mode != BUZ_MODE_MOTION_DECOMPRESS && - zr->codec_mode != BUZ_MODE_MOTION_COMPRESS) { - dprintk(1, - KERN_ERR - "%s: jpg_sync() - codec not in streaming mode\n", - ZR_DEVNAME(zr)); - return -EINVAL; - } - if (!wait_event_interruptible_timeout(zr->jpg_capq, - (zr->jpg_que_tail != zr->jpg_dma_tail || - zr->jpg_dma_tail == zr->jpg_dma_head), - 10*HZ)) { - int isr; - - btand(~ZR36057_JMC_Go_en, ZR36057_JMC); - udelay(1); - zr->codec->control(zr->codec, CODEC_G_STATUS, - sizeof(isr), &isr); - dprintk(1, - KERN_ERR - "%s: jpg_sync() - timeout: codec isr=0x%02x\n", - ZR_DEVNAME(zr), isr); - - return -ETIME; - - } - if (signal_pending(current)) - return -ERESTARTSYS; - - spin_lock_irqsave(&zr->spinlock, flags); - - if (zr->jpg_dma_tail != zr->jpg_dma_head) - frame = zr->jpg_pend[zr->jpg_que_tail++ & BUZ_MASK_FRAME]; - else - frame = zr->jpg_pend[zr->jpg_que_tail & BUZ_MASK_FRAME]; - - /* buffer should now be in BUZ_STATE_DONE */ - if (zr->jpg_buffers.buffer[frame].state != BUZ_STATE_DONE) - dprintk(2, - KERN_ERR "%s: jpg_sync() - internal state error\n", - ZR_DEVNAME(zr)); - - *bs = zr->jpg_buffers.buffer[frame].bs; - bs->frame = frame; - zr->jpg_buffers.buffer[frame].state = BUZ_STATE_USER; - fh->jpg_buffers.buffer[frame] = zr->jpg_buffers.buffer[frame]; - - spin_unlock_irqrestore(&zr->spinlock, flags); - - return 0; -} - -static void -zoran_open_init_session (struct file *file) -{ - int i; - struct zoran_fh *fh = file->private_data; - struct zoran *zr = fh->zr; - - /* Per default, map the V4L Buffers */ - fh->map_mode = ZORAN_MAP_MODE_RAW; - - /* take over the card's current settings */ - fh->overlay_settings = zr->overlay_settings; - fh->overlay_settings.is_set = 0; - fh->overlay_settings.format = zr->overlay_settings.format; - fh->overlay_active = ZORAN_FREE; - - /* v4l settings */ - fh->v4l_settings = zr->v4l_settings; - - /* v4l_buffers */ - memset(&fh->v4l_buffers, 0, sizeof(struct zoran_v4l_struct)); - for (i = 0; i < VIDEO_MAX_FRAME; i++) { - fh->v4l_buffers.buffer[i].state = BUZ_STATE_USER; /* nothing going on */ - fh->v4l_buffers.buffer[i].bs.frame = i; - } - fh->v4l_buffers.allocated = 0; - fh->v4l_buffers.ready_to_be_freed = 0; - fh->v4l_buffers.active = ZORAN_FREE; - fh->v4l_buffers.buffer_size = v4l_bufsize; - fh->v4l_buffers.num_buffers = v4l_nbufs; - - /* jpg settings */ - fh->jpg_settings = zr->jpg_settings; - - /* jpg_buffers */ - memset(&fh->jpg_buffers, 0, sizeof(struct zoran_jpg_struct)); - for (i = 0; i < BUZ_MAX_FRAME; i++) { - fh->jpg_buffers.buffer[i].state = BUZ_STATE_USER; /* nothing going on */ - fh->jpg_buffers.buffer[i].bs.frame = i; - } - fh->jpg_buffers.need_contiguous = zr->jpg_buffers.need_contiguous; - fh->jpg_buffers.allocated = 0; - fh->jpg_buffers.ready_to_be_freed = 0; - fh->jpg_buffers.active = ZORAN_FREE; - fh->jpg_buffers.buffer_size = jpg_bufsize; - fh->jpg_buffers.num_buffers = jpg_nbufs; -} - -static void -zoran_close_end_session (struct file *file) -{ - struct zoran_fh *fh = file->private_data; - struct zoran *zr = fh->zr; - - /* overlay */ - if (fh->overlay_active != ZORAN_FREE) { - fh->overlay_active = zr->overlay_active = ZORAN_FREE; - zr->v4l_overlay_active = 0; - if (!zr->v4l_memgrab_active) - zr36057_overlay(zr, 0); - zr->overlay_mask = NULL; - } - - /* v4l capture */ - if (fh->v4l_buffers.active != ZORAN_FREE) { - unsigned long flags; - - spin_lock_irqsave(&zr->spinlock, flags); - zr36057_set_memgrab(zr, 0); - zr->v4l_buffers.allocated = 0; - zr->v4l_buffers.active = fh->v4l_buffers.active = - ZORAN_FREE; - spin_unlock_irqrestore(&zr->spinlock, flags); - } - - /* v4l buffers */ - if (fh->v4l_buffers.allocated || - fh->v4l_buffers.ready_to_be_freed) { - v4l_fbuffer_free(file); - } - - /* jpg capture */ - if (fh->jpg_buffers.active != ZORAN_FREE) { - zr36057_enable_jpg(zr, BUZ_MODE_IDLE); - zr->jpg_buffers.allocated = 0; - zr->jpg_buffers.active = fh->jpg_buffers.active = - ZORAN_FREE; - } - - /* jpg buffers */ - if (fh->jpg_buffers.allocated || - fh->jpg_buffers.ready_to_be_freed) { - jpg_fbuffer_free(file); - } -} - -/* - * Open a zoran card. Right now the flags stuff is just playing - */ - -static int -zoran_open (struct inode *inode, - struct file *file) -{ - unsigned int minor = iminor(inode); - struct zoran *zr = NULL; - struct zoran_fh *fh; - int i, res, first_open = 0, have_module_locks = 0; - - lock_kernel(); - /* find the device */ - for (i = 0; i < zoran_num; i++) { - if (zoran[i]->video_dev->minor == minor) { - zr = zoran[i]; - break; - } - } - - if (!zr) { - dprintk(1, KERN_ERR "%s: device not found!\n", ZORAN_NAME); - res = -ENODEV; - goto open_unlock_and_return; - } - - /* see fs/device.c - the kernel already locks during open(), - * so locking ourselves only causes deadlocks */ - /*mutex_lock(&zr->resource_lock);*/ - - if (!zr->decoder) { - dprintk(1, - KERN_ERR "%s: no TV decoder loaded for device!\n", - ZR_DEVNAME(zr)); - res = -EIO; - goto open_unlock_and_return; - } - - /* try to grab a module lock */ - if (!try_module_get(THIS_MODULE)) { - dprintk(1, - KERN_ERR - "%s: failed to acquire my own lock! PANIC!\n", - ZR_DEVNAME(zr)); - res = -ENODEV; - goto open_unlock_and_return; - } - if (!try_module_get(zr->decoder->driver->driver.owner)) { - dprintk(1, - KERN_ERR - "%s: failed to grab ownership of i2c decoder\n", - ZR_DEVNAME(zr)); - res = -EIO; - module_put(THIS_MODULE); - goto open_unlock_and_return; - } - if (zr->encoder && - !try_module_get(zr->encoder->driver->driver.owner)) { - dprintk(1, - KERN_ERR - "%s: failed to grab ownership of i2c encoder\n", - ZR_DEVNAME(zr)); - res = -EIO; - module_put(zr->decoder->driver->driver.owner); - module_put(THIS_MODULE); - goto open_unlock_and_return; - } - - have_module_locks = 1; - - if (zr->user >= 2048) { - dprintk(1, KERN_ERR "%s: too many users (%d) on device\n", - ZR_DEVNAME(zr), zr->user); - res = -EBUSY; - goto open_unlock_and_return; - } - - dprintk(1, KERN_INFO "%s: zoran_open(%s, pid=[%d]), users(-)=%d\n", - ZR_DEVNAME(zr), current->comm, task_pid_nr(current), zr->user); - - /* now, create the open()-specific file_ops struct */ - fh = kzalloc(sizeof(struct zoran_fh), GFP_KERNEL); - if (!fh) { - dprintk(1, - KERN_ERR - "%s: zoran_open() - allocation of zoran_fh failed\n", - ZR_DEVNAME(zr)); - res = -ENOMEM; - goto open_unlock_and_return; - } - /* used to be BUZ_MAX_WIDTH/HEIGHT, but that gives overflows - * on norm-change! */ - fh->overlay_mask = - kmalloc(((768 + 31) / 32) * 576 * 4, GFP_KERNEL); - if (!fh->overlay_mask) { - dprintk(1, - KERN_ERR - "%s: zoran_open() - allocation of overlay_mask failed\n", - ZR_DEVNAME(zr)); - kfree(fh); - res = -ENOMEM; - goto open_unlock_and_return; - } - - if (zr->user++ == 0) - first_open = 1; - - /*mutex_unlock(&zr->resource_lock);*/ - - /* default setup - TODO: look at flags */ - if (first_open) { /* First device open */ - zr36057_restart(zr); - zoran_open_init_params(zr); - zoran_init_hardware(zr); - - btor(ZR36057_ICR_IntPinEn, ZR36057_ICR); - } - - /* set file_ops stuff */ - file->private_data = fh; - fh->zr = zr; - zoran_open_init_session(file); - unlock_kernel(); - - return 0; - -open_unlock_and_return: - /* if we grabbed locks, release them accordingly */ - if (have_module_locks) { - module_put(zr->decoder->driver->driver.owner); - if (zr->encoder) { - module_put(zr->encoder->driver->driver.owner); - } - module_put(THIS_MODULE); - } - - /* if there's no device found, we didn't obtain the lock either */ - if (zr) { - /*mutex_unlock(&zr->resource_lock);*/ - } - unlock_kernel(); - - return res; -} - -static int -zoran_close (struct inode *inode, - struct file *file) -{ - struct zoran_fh *fh = file->private_data; - struct zoran *zr = fh->zr; - - dprintk(1, KERN_INFO "%s: zoran_close(%s, pid=[%d]), users(+)=%d\n", - ZR_DEVNAME(zr), current->comm, task_pid_nr(current), zr->user); - - /* kernel locks (fs/device.c), so don't do that ourselves - * (prevents deadlocks) */ - /*mutex_lock(&zr->resource_lock);*/ - - zoran_close_end_session(file); - - if (zr->user-- == 1) { /* Last process */ - /* Clean up JPEG process */ - wake_up_interruptible(&zr->jpg_capq); - zr36057_enable_jpg(zr, BUZ_MODE_IDLE); - zr->jpg_buffers.allocated = 0; - zr->jpg_buffers.active = ZORAN_FREE; - - /* disable interrupts */ - btand(~ZR36057_ICR_IntPinEn, ZR36057_ICR); - - if (zr36067_debug > 1) - print_interrupts(zr); - - /* Overlay off */ - zr->v4l_overlay_active = 0; - zr36057_overlay(zr, 0); - zr->overlay_mask = NULL; - - /* capture off */ - wake_up_interruptible(&zr->v4l_capq); - zr36057_set_memgrab(zr, 0); - zr->v4l_buffers.allocated = 0; - zr->v4l_buffers.active = ZORAN_FREE; - zoran_set_pci_master(zr, 0); - - if (!pass_through) { /* Switch to color bar */ - int zero = 0, two = 2; - decoder_command(zr, DECODER_ENABLE_OUTPUT, &zero); - encoder_command(zr, ENCODER_SET_INPUT, &two); - } - } - - file->private_data = NULL; - kfree(fh->overlay_mask); - kfree(fh); - - /* release locks on the i2c modules */ - module_put(zr->decoder->driver->driver.owner); - if (zr->encoder) { - module_put(zr->encoder->driver->driver.owner); - } - module_put(THIS_MODULE); - - /*mutex_unlock(&zr->resource_lock);*/ - - dprintk(4, KERN_INFO "%s: zoran_close() done\n", ZR_DEVNAME(zr)); - - return 0; -} - - -static ssize_t -zoran_read (struct file *file, - char __user *data, - size_t count, - loff_t *ppos) -{ - /* we simply don't support read() (yet)... */ - - return -EINVAL; -} - -static ssize_t -zoran_write (struct file *file, - const char __user *data, - size_t count, - loff_t *ppos) -{ - /* ...and the same goes for write() */ - - return -EINVAL; -} - -static int -setup_fbuffer (struct file *file, - void *base, - const struct zoran_format *fmt, - int width, - int height, - int bytesperline) -{ - struct zoran_fh *fh = file->private_data; - struct zoran *zr = fh->zr; - - /* (Ronald) v4l/v4l2 guidelines */ - if (!capable(CAP_SYS_ADMIN) && !capable(CAP_SYS_RAWIO)) - return -EPERM; - - /* Don't allow frame buffer overlay if PCI or AGP is buggy, or on - ALi Magik (that needs very low latency while the card needs a - higher value always) */ - - if (pci_pci_problems & (PCIPCI_FAIL | PCIAGP_FAIL | PCIPCI_ALIMAGIK)) - return -ENXIO; - - /* we need a bytesperline value, even if not given */ - if (!bytesperline) - bytesperline = width * ((fmt->depth + 7) & ~7) / 8; - -#if 0 - if (zr->overlay_active) { - /* dzjee... stupid users... don't even bother to turn off - * overlay before changing the memory location... - * normally, we would return errors here. However, one of - * the tools that does this is... xawtv! and since xawtv - * is used by +/- 99% of the users, we'd rather be user- - * friendly and silently do as if nothing went wrong */ - dprintk(3, - KERN_ERR - "%s: setup_fbuffer() - forced overlay turnoff because framebuffer changed\n", - ZR_DEVNAME(zr)); - zr36057_overlay(zr, 0); - } -#endif - - if (!(fmt->flags & ZORAN_FORMAT_OVERLAY)) { - dprintk(1, - KERN_ERR - "%s: setup_fbuffer() - no valid overlay format given\n", - ZR_DEVNAME(zr)); - return -EINVAL; - } - if (height <= 0 || width <= 0 || bytesperline <= 0) { - dprintk(1, - KERN_ERR - "%s: setup_fbuffer() - invalid height/width/bpl value (%d|%d|%d)\n", - ZR_DEVNAME(zr), width, height, bytesperline); - return -EINVAL; - } - if (bytesperline & 3) { - dprintk(1, - KERN_ERR - "%s: setup_fbuffer() - bytesperline (%d) must be 4-byte aligned\n", - ZR_DEVNAME(zr), bytesperline); - return -EINVAL; - } - - zr->buffer.base = (void *) ((unsigned long) base & ~3); - zr->buffer.height = height; - zr->buffer.width = width; - zr->buffer.depth = fmt->depth; - zr->overlay_settings.format = fmt; - zr->buffer.bytesperline = bytesperline; - - /* The user should set new window parameters */ - zr->overlay_settings.is_set = 0; - - return 0; -} - - -static int -setup_window (struct file *file, - int x, - int y, - int width, - int height, - struct video_clip __user *clips, - int clipcount, - void __user *bitmap) -{ - struct zoran_fh *fh = file->private_data; - struct zoran *zr = fh->zr; - struct video_clip *vcp = NULL; - int on, end; - - - if (!zr->buffer.base) { - dprintk(1, - KERN_ERR - "%s: setup_window() - frame buffer has to be set first\n", - ZR_DEVNAME(zr)); - return -EINVAL; - } - - if (!fh->overlay_settings.format) { - dprintk(1, - KERN_ERR - "%s: setup_window() - no overlay format set\n", - ZR_DEVNAME(zr)); - return -EINVAL; - } - - /* - * The video front end needs 4-byte alinged line sizes, we correct that - * silently here if necessary - */ - if (zr->buffer.depth == 15 || zr->buffer.depth == 16) { - end = (x + width) & ~1; /* round down */ - x = (x + 1) & ~1; /* round up */ - width = end - x; - } - - if (zr->buffer.depth == 24) { - end = (x + width) & ~3; /* round down */ - x = (x + 3) & ~3; /* round up */ - width = end - x; - } - - if (width > BUZ_MAX_WIDTH) - width = BUZ_MAX_WIDTH; - if (height > BUZ_MAX_HEIGHT) - height = BUZ_MAX_HEIGHT; - - /* Check for vaild parameters */ - if (width < BUZ_MIN_WIDTH || height < BUZ_MIN_HEIGHT || - width > BUZ_MAX_WIDTH || height > BUZ_MAX_HEIGHT) { - dprintk(1, - KERN_ERR - "%s: setup_window() - width = %d or height = %d invalid\n", - ZR_DEVNAME(zr), width, height); - return -EINVAL; - } - - fh->overlay_settings.x = x; - fh->overlay_settings.y = y; - fh->overlay_settings.width = width; - fh->overlay_settings.height = height; - fh->overlay_settings.clipcount = clipcount; - - /* - * If an overlay is running, we have to switch it off - * and switch it on again in order to get the new settings in effect. - * - * We also want to avoid that the overlay mask is written - * when an overlay is running. - */ - - on = zr->v4l_overlay_active && !zr->v4l_memgrab_active && - zr->overlay_active != ZORAN_FREE && - fh->overlay_active != ZORAN_FREE; - if (on) - zr36057_overlay(zr, 0); - - /* - * Write the overlay mask if clips are wanted. - * We prefer a bitmap. - */ - if (bitmap) { - /* fake value - it just means we want clips */ - fh->overlay_settings.clipcount = 1; - - if (copy_from_user(fh->overlay_mask, bitmap, - (width * height + 7) / 8)) { - return -EFAULT; - } - } else if (clipcount > 0) { - /* write our own bitmap from the clips */ - vcp = vmalloc(sizeof(struct video_clip) * (clipcount + 4)); - if (vcp == NULL) { - dprintk(1, - KERN_ERR - "%s: setup_window() - Alloc of clip mask failed\n", - ZR_DEVNAME(zr)); - return -ENOMEM; - } - if (copy_from_user - (vcp, clips, sizeof(struct video_clip) * clipcount)) { - vfree(vcp); - return -EFAULT; - } - write_overlay_mask(file, vcp, clipcount); - vfree(vcp); - } - - fh->overlay_settings.is_set = 1; - if (fh->overlay_active != ZORAN_FREE && - zr->overlay_active != ZORAN_FREE) - zr->overlay_settings = fh->overlay_settings; - - if (on) - zr36057_overlay(zr, 1); - - /* Make sure the changes come into effect */ - return wait_grab_pending(zr); -} - -static int -setup_overlay (struct file *file, - int on) -{ - struct zoran_fh *fh = file->private_data; - struct zoran *zr = fh->zr; - - /* If there is nothing to do, return immediatly */ - if ((on && fh->overlay_active != ZORAN_FREE) || - (!on && fh->overlay_active == ZORAN_FREE)) - return 0; - - /* check whether we're touching someone else's overlay */ - if (on && zr->overlay_active != ZORAN_FREE && - fh->overlay_active == ZORAN_FREE) { - dprintk(1, - KERN_ERR - "%s: setup_overlay() - overlay is already active for another session\n", - ZR_DEVNAME(zr)); - return -EBUSY; - } - if (!on && zr->overlay_active != ZORAN_FREE && - fh->overlay_active == ZORAN_FREE) { - dprintk(1, - KERN_ERR - "%s: setup_overlay() - you cannot cancel someone else's session\n", - ZR_DEVNAME(zr)); - return -EPERM; - } - - if (on == 0) { - zr->overlay_active = fh->overlay_active = ZORAN_FREE; - zr->v4l_overlay_active = 0; - /* When a grab is running, the video simply - * won't be switched on any more */ - if (!zr->v4l_memgrab_active) - zr36057_overlay(zr, 0); - zr->overlay_mask = NULL; - } else { - if (!zr->buffer.base || !fh->overlay_settings.is_set) { - dprintk(1, - KERN_ERR - "%s: setup_overlay() - buffer or window not set\n", - ZR_DEVNAME(zr)); - return -EINVAL; - } - if (!fh->overlay_settings.format) { - dprintk(1, - KERN_ERR - "%s: setup_overlay() - no overlay format set\n", - ZR_DEVNAME(zr)); - return -EINVAL; - } - zr->overlay_active = fh->overlay_active = ZORAN_LOCKED; - zr->v4l_overlay_active = 1; - zr->overlay_mask = fh->overlay_mask; - zr->overlay_settings = fh->overlay_settings; - if (!zr->v4l_memgrab_active) - zr36057_overlay(zr, 1); - /* When a grab is running, the video will be - * switched on when grab is finished */ - } - - /* Make sure the changes come into effect */ - return wait_grab_pending(zr); -} - - /* get the status of a buffer in the clients buffer queue */ -static int -zoran_v4l2_buffer_status (struct file *file, - struct v4l2_buffer *buf, - int num) -{ - struct zoran_fh *fh = file->private_data; - struct zoran *zr = fh->zr; - - buf->flags = V4L2_BUF_FLAG_MAPPED; - - switch (fh->map_mode) { - case ZORAN_MAP_MODE_RAW: - - /* check range */ - if (num < 0 || num >= fh->v4l_buffers.num_buffers || - !fh->v4l_buffers.allocated) { - dprintk(1, - KERN_ERR - "%s: v4l2_buffer_status() - wrong number or buffers not allocated\n", - ZR_DEVNAME(zr)); - return -EINVAL; - } - - buf->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; - buf->length = fh->v4l_buffers.buffer_size; - - /* get buffer */ - buf->bytesused = fh->v4l_buffers.buffer[num].bs.length; - if (fh->v4l_buffers.buffer[num].state == BUZ_STATE_DONE || - fh->v4l_buffers.buffer[num].state == BUZ_STATE_USER) { - buf->sequence = fh->v4l_buffers.buffer[num].bs.seq; - buf->flags |= V4L2_BUF_FLAG_DONE; - buf->timestamp = - fh->v4l_buffers.buffer[num].bs.timestamp; - } else { - buf->flags |= V4L2_BUF_FLAG_QUEUED; - } - - if (fh->v4l_settings.height <= BUZ_MAX_HEIGHT / 2) - buf->field = V4L2_FIELD_TOP; - else - buf->field = V4L2_FIELD_INTERLACED; - - break; - - case ZORAN_MAP_MODE_JPG_REC: - case ZORAN_MAP_MODE_JPG_PLAY: - - /* check range */ - if (num < 0 || num >= fh->jpg_buffers.num_buffers || - !fh->jpg_buffers.allocated) { - dprintk(1, - KERN_ERR - "%s: v4l2_buffer_status() - wrong number or buffers not allocated\n", - ZR_DEVNAME(zr)); - return -EINVAL; - } - - buf->type = (fh->map_mode == ZORAN_MAP_MODE_JPG_REC) ? - V4L2_BUF_TYPE_VIDEO_CAPTURE : - V4L2_BUF_TYPE_VIDEO_OUTPUT; - buf->length = fh->jpg_buffers.buffer_size; - - /* these variables are only written after frame has been captured */ - if (fh->jpg_buffers.buffer[num].state == BUZ_STATE_DONE || - fh->jpg_buffers.buffer[num].state == BUZ_STATE_USER) { - buf->sequence = fh->jpg_buffers.buffer[num].bs.seq; - buf->timestamp = - fh->jpg_buffers.buffer[num].bs.timestamp; - buf->bytesused = - fh->jpg_buffers.buffer[num].bs.length; - buf->flags |= V4L2_BUF_FLAG_DONE; - } else { - buf->flags |= V4L2_BUF_FLAG_QUEUED; - } - - /* which fields are these? */ - if (fh->jpg_settings.TmpDcm != 1) - buf->field = - fh->jpg_settings. - odd_even ? V4L2_FIELD_TOP : V4L2_FIELD_BOTTOM; - else - buf->field = - fh->jpg_settings. - odd_even ? V4L2_FIELD_SEQ_TB : - V4L2_FIELD_SEQ_BT; - - break; - - default: - - dprintk(5, - KERN_ERR - "%s: v4l2_buffer_status() - invalid buffer type|map_mode (%d|%d)\n", - ZR_DEVNAME(zr), buf->type, fh->map_mode); - return -EINVAL; - } - - buf->memory = V4L2_MEMORY_MMAP; - buf->index = num; - buf->m.offset = buf->length * num; - - return 0; -} - -static int -zoran_set_norm (struct zoran *zr, - int norm) /* VIDEO_MODE_* */ -{ - int norm_encoder, on; - - if (zr->v4l_buffers.active != ZORAN_FREE || - zr->jpg_buffers.active != ZORAN_FREE) { - dprintk(1, - KERN_WARNING - "%s: set_norm() called while in playback/capture mode\n", - ZR_DEVNAME(zr)); - return -EBUSY; - } - - if (lock_norm && norm != zr->norm) { - if (lock_norm > 1) { - dprintk(1, - KERN_WARNING - "%s: set_norm() - TV standard is locked, can not switch norm\n", - ZR_DEVNAME(zr)); - return -EPERM; - } else { - dprintk(1, - KERN_WARNING - "%s: set_norm() - TV standard is locked, norm was not changed\n", - ZR_DEVNAME(zr)); - norm = zr->norm; - } - } - - if (norm != VIDEO_MODE_AUTO && - (norm < 0 || norm >= zr->card.norms || - !zr->card.tvn[norm])) { - dprintk(1, - KERN_ERR "%s: set_norm() - unsupported norm %d\n", - ZR_DEVNAME(zr), norm); - return -EINVAL; - } - - if (norm == VIDEO_MODE_AUTO) { - int status; - - /* if we have autodetect, ... */ - struct video_decoder_capability caps; - decoder_command(zr, DECODER_GET_CAPABILITIES, &caps); - if (!(caps.flags & VIDEO_DECODER_AUTO)) { - dprintk(1, KERN_ERR "%s: norm=auto unsupported\n", - ZR_DEVNAME(zr)); - return -EINVAL; - } - - decoder_command(zr, DECODER_SET_NORM, &norm); - - /* let changes come into effect */ - ssleep(2); - - decoder_command(zr, DECODER_GET_STATUS, &status); - if (!(status & DECODER_STATUS_GOOD)) { - dprintk(1, - KERN_ERR - "%s: set_norm() - no norm detected\n", - ZR_DEVNAME(zr)); - /* reset norm */ - decoder_command(zr, DECODER_SET_NORM, &zr->norm); - return -EIO; - } - - if (status & DECODER_STATUS_NTSC) - norm = VIDEO_MODE_NTSC; - else if (status & DECODER_STATUS_SECAM) - norm = VIDEO_MODE_SECAM; - else - norm = VIDEO_MODE_PAL; - } - zr->timing = zr->card.tvn[norm]; - norm_encoder = norm; - - /* We switch overlay off and on since a change in the - * norm needs different VFE settings */ - on = zr->overlay_active && !zr->v4l_memgrab_active; - if (on) - zr36057_overlay(zr, 0); - - decoder_command(zr, DECODER_SET_NORM, &norm); - encoder_command(zr, ENCODER_SET_NORM, &norm_encoder); - - if (on) - zr36057_overlay(zr, 1); - - /* Make sure the changes come into effect */ - zr->norm = norm; - - return 0; -} - -static int -zoran_set_input (struct zoran *zr, - int input) -{ - int realinput; - - if (input == zr->input) { - return 0; - } - - if (zr->v4l_buffers.active != ZORAN_FREE || - zr->jpg_buffers.active != ZORAN_FREE) { - dprintk(1, - KERN_WARNING - "%s: set_input() called while in playback/capture mode\n", - ZR_DEVNAME(zr)); - return -EBUSY; - } - - if (input < 0 || input >= zr->card.inputs) { - dprintk(1, - KERN_ERR - "%s: set_input() - unnsupported input %d\n", - ZR_DEVNAME(zr), input); - return -EINVAL; - } - - realinput = zr->card.input[input].muxsel; - zr->input = input; - - decoder_command(zr, DECODER_SET_INPUT, &realinput); - - return 0; -} - -/* - * ioctl routine - */ - -static int -zoran_do_ioctl (struct inode *inode, - struct file *file, - unsigned int cmd, - void *arg) -{ - struct zoran_fh *fh = file->private_data; - struct zoran *zr = fh->zr; - /* CAREFUL: used in multiple places here */ - struct zoran_jpg_settings settings; - - /* we might have older buffers lying around... We don't want - * to wait, but we do want to try cleaning them up ASAP. So - * we try to obtain the lock and free them. If that fails, we - * don't do anything and wait for the next turn. In the end, - * zoran_close() or a new allocation will still free them... - * This is just a 'the sooner the better' extra 'feature' - * - * We don't free the buffers right on munmap() because that - * causes oopses (kfree() inside munmap() oopses for no - * apparent reason - it's also not reproduceable in any way, - * but moving the free code outside the munmap() handler fixes - * all this... If someone knows why, please explain me (Ronald) - */ - if (mutex_trylock(&zr->resource_lock)) { - /* we obtained it! Let's try to free some things */ - if (fh->jpg_buffers.ready_to_be_freed) - jpg_fbuffer_free(file); - if (fh->v4l_buffers.ready_to_be_freed) - v4l_fbuffer_free(file); - - mutex_unlock(&zr->resource_lock); - } - - switch (cmd) { - - case VIDIOCGCAP: - { - struct video_capability *vcap = arg; - - dprintk(3, KERN_DEBUG "%s: VIDIOCGCAP\n", ZR_DEVNAME(zr)); - - memset(vcap, 0, sizeof(struct video_capability)); - strncpy(vcap->name, ZR_DEVNAME(zr), sizeof(vcap->name)-1); - vcap->type = ZORAN_VID_TYPE; - - vcap->channels = zr->card.inputs; - vcap->audios = 0; - mutex_lock(&zr->resource_lock); - vcap->maxwidth = BUZ_MAX_WIDTH; - vcap->maxheight = BUZ_MAX_HEIGHT; - vcap->minwidth = BUZ_MIN_WIDTH; - vcap->minheight = BUZ_MIN_HEIGHT; - mutex_unlock(&zr->resource_lock); - - return 0; - } - break; - - case VIDIOCGCHAN: - { - struct video_channel *vchan = arg; - int channel = vchan->channel; - - dprintk(3, KERN_DEBUG "%s: VIDIOCGCHAN - channel=%d\n", - ZR_DEVNAME(zr), vchan->channel); - - memset(vchan, 0, sizeof(struct video_channel)); - if (channel > zr->card.inputs || channel < 0) { - dprintk(1, - KERN_ERR - "%s: VIDIOCGCHAN on not existing channel %d\n", - ZR_DEVNAME(zr), channel); - return -EINVAL; - } - - strcpy(vchan->name, zr->card.input[channel].name); - - vchan->tuners = 0; - vchan->flags = 0; - vchan->type = VIDEO_TYPE_CAMERA; - mutex_lock(&zr->resource_lock); - vchan->norm = zr->norm; - mutex_unlock(&zr->resource_lock); - vchan->channel = channel; - - return 0; - } - break; - - /* RJ: the documentation at http://roadrunner.swansea.linux.org.uk/v4lapi.shtml says: - * - * * "The VIDIOCSCHAN ioctl takes an integer argument and switches the capture to this input." - * * ^^^^^^^ - * * The famos BTTV driver has it implemented with a struct video_channel argument - * * and we follow it for compatibility reasons - * * - * * BTW: this is the only way the user can set the norm! - */ - - case VIDIOCSCHAN: - { - struct video_channel *vchan = arg; - int res; - - dprintk(3, - KERN_DEBUG - "%s: VIDIOCSCHAN - channel=%d, norm=%d\n", - ZR_DEVNAME(zr), vchan->channel, vchan->norm); - - mutex_lock(&zr->resource_lock); - if ((res = zoran_set_input(zr, vchan->channel))) - goto schan_unlock_and_return; - if ((res = zoran_set_norm(zr, vchan->norm))) - goto schan_unlock_and_return; - - /* Make sure the changes come into effect */ - res = wait_grab_pending(zr); - schan_unlock_and_return: - mutex_unlock(&zr->resource_lock); - return res; - } - break; - - case VIDIOCGPICT: - { - struct video_picture *vpict = arg; - - dprintk(3, KERN_DEBUG "%s: VIDIOCGPICT\n", ZR_DEVNAME(zr)); - - memset(vpict, 0, sizeof(struct video_picture)); - mutex_lock(&zr->resource_lock); - vpict->hue = zr->hue; - vpict->brightness = zr->brightness; - vpict->contrast = zr->contrast; - vpict->colour = zr->saturation; - if (fh->overlay_settings.format) { - vpict->depth = fh->overlay_settings.format->depth; - vpict->palette = fh->overlay_settings.format->palette; - } else { - vpict->depth = 0; - } - mutex_unlock(&zr->resource_lock); - - return 0; - } - break; - - case VIDIOCSPICT: - { - struct video_picture *vpict = arg; - int i; - - dprintk(3, - KERN_DEBUG - "%s: VIDIOCSPICT - bri=%d, hue=%d, col=%d, con=%d, dep=%d, pal=%d\n", - ZR_DEVNAME(zr), vpict->brightness, vpict->hue, - vpict->colour, vpict->contrast, vpict->depth, - vpict->palette); - - for (i = 0; i < NUM_FORMATS; i++) { - const struct zoran_format *fmt = &zoran_formats[i]; - - if (fmt->palette != -1 && - fmt->flags & ZORAN_FORMAT_OVERLAY && - fmt->palette == vpict->palette && - fmt->depth == vpict->depth) - break; - } - if (i == NUM_FORMATS) { - dprintk(1, - KERN_ERR - "%s: VIDIOCSPICT - Invalid palette %d\n", - ZR_DEVNAME(zr), vpict->palette); - return -EINVAL; - } - - mutex_lock(&zr->resource_lock); - - decoder_command(zr, DECODER_SET_PICTURE, vpict); - - zr->hue = vpict->hue; - zr->contrast = vpict->contrast; - zr->saturation = vpict->colour; - zr->brightness = vpict->brightness; - - fh->overlay_settings.format = &zoran_formats[i]; - - mutex_unlock(&zr->resource_lock); - - return 0; - } - break; - - case VIDIOCCAPTURE: - { - int *on = arg, res; - - dprintk(3, KERN_DEBUG "%s: VIDIOCCAPTURE - on=%d\n", - ZR_DEVNAME(zr), *on); - - mutex_lock(&zr->resource_lock); - res = setup_overlay(file, *on); - mutex_unlock(&zr->resource_lock); - - return res; - } - break; - - case VIDIOCGWIN: - { - struct video_window *vwin = arg; - - dprintk(3, KERN_DEBUG "%s: VIDIOCGWIN\n", ZR_DEVNAME(zr)); - - memset(vwin, 0, sizeof(struct video_window)); - mutex_lock(&zr->resource_lock); - vwin->x = fh->overlay_settings.x; - vwin->y = fh->overlay_settings.y; - vwin->width = fh->overlay_settings.width; - vwin->height = fh->overlay_settings.height; - mutex_unlock(&zr->resource_lock); - vwin->clipcount = 0; - return 0; - } - break; - - case VIDIOCSWIN: - { - struct video_window *vwin = arg; - int res; - - dprintk(3, - KERN_DEBUG - "%s: VIDIOCSWIN - x=%d, y=%d, w=%d, h=%d, clipcount=%d\n", - ZR_DEVNAME(zr), vwin->x, vwin->y, vwin->width, - vwin->height, vwin->clipcount); - - mutex_lock(&zr->resource_lock); - res = - setup_window(file, vwin->x, vwin->y, vwin->width, - vwin->height, vwin->clips, - vwin->clipcount, NULL); - mutex_unlock(&zr->resource_lock); - - return res; - } - break; - - case VIDIOCGFBUF: - { - struct video_buffer *vbuf = arg; - - dprintk(3, KERN_DEBUG "%s: VIDIOCGFBUF\n", ZR_DEVNAME(zr)); - - mutex_lock(&zr->resource_lock); - *vbuf = zr->buffer; - mutex_unlock(&zr->resource_lock); - return 0; - } - break; - - case VIDIOCSFBUF: - { - struct video_buffer *vbuf = arg; - int i, res = 0; - - dprintk(3, - KERN_DEBUG - "%s: VIDIOCSFBUF - base=%p, w=%d, h=%d, depth=%d, bpl=%d\n", - ZR_DEVNAME(zr), vbuf->base, vbuf->width, - vbuf->height, vbuf->depth, vbuf->bytesperline); - - for (i = 0; i < NUM_FORMATS; i++) - if (zoran_formats[i].depth == vbuf->depth) - break; - if (i == NUM_FORMATS) { - dprintk(1, - KERN_ERR - "%s: VIDIOCSFBUF - invalid fbuf depth %d\n", - ZR_DEVNAME(zr), vbuf->depth); - return -EINVAL; - } - - mutex_lock(&zr->resource_lock); - res = - setup_fbuffer(file, vbuf->base, &zoran_formats[i], - vbuf->width, vbuf->height, - vbuf->bytesperline); - mutex_unlock(&zr->resource_lock); - - return res; - } - break; - - case VIDIOCSYNC: - { - int *frame = arg, res; - - dprintk(3, KERN_DEBUG "%s: VIDIOCSYNC - frame=%d\n", - ZR_DEVNAME(zr), *frame); - - mutex_lock(&zr->resource_lock); - res = v4l_sync(file, *frame); - mutex_unlock(&zr->resource_lock); - if (!res) - zr->v4l_sync_tail++; - return res; - } - break; - - case VIDIOCMCAPTURE: - { - struct video_mmap *vmap = arg; - int res; - - dprintk(3, - KERN_DEBUG - "%s: VIDIOCMCAPTURE - frame=%d, geom=%dx%d, fmt=%d\n", - ZR_DEVNAME(zr), vmap->frame, vmap->width, vmap->height, - vmap->format); - - mutex_lock(&zr->resource_lock); - res = v4l_grab(file, vmap); - mutex_unlock(&zr->resource_lock); - return res; - } - break; - - case VIDIOCGMBUF: - { - struct video_mbuf *vmbuf = arg; - int i, res = 0; - - dprintk(3, KERN_DEBUG "%s: VIDIOCGMBUF\n", ZR_DEVNAME(zr)); - - vmbuf->size = - fh->v4l_buffers.num_buffers * - fh->v4l_buffers.buffer_size; - vmbuf->frames = fh->v4l_buffers.num_buffers; - for (i = 0; i < vmbuf->frames; i++) { - vmbuf->offsets[i] = - i * fh->v4l_buffers.buffer_size; - } - - mutex_lock(&zr->resource_lock); - - if (fh->jpg_buffers.allocated || fh->v4l_buffers.allocated) { - dprintk(1, - KERN_ERR - "%s: VIDIOCGMBUF - buffers already allocated\n", - ZR_DEVNAME(zr)); - res = -EINVAL; - goto v4l1reqbuf_unlock_and_return; - } - - if (v4l_fbuffer_alloc(file)) { - res = -ENOMEM; - goto v4l1reqbuf_unlock_and_return; - } - - /* The next mmap will map the V4L buffers */ - fh->map_mode = ZORAN_MAP_MODE_RAW; - v4l1reqbuf_unlock_and_return: - mutex_unlock(&zr->resource_lock); - - return res; - } - break; - - case VIDIOCGUNIT: - { - struct video_unit *vunit = arg; - - dprintk(3, KERN_DEBUG "%s: VIDIOCGUNIT\n", ZR_DEVNAME(zr)); - - vunit->video = zr->video_dev->minor; - vunit->vbi = VIDEO_NO_UNIT; - vunit->radio = VIDEO_NO_UNIT; - vunit->audio = VIDEO_NO_UNIT; - vunit->teletext = VIDEO_NO_UNIT; - - return 0; - } - break; - - /* - * RJ: In principal we could support subcaptures for V4L grabbing. - * Not even the famous BTTV driver has them, however. - * If there should be a strong demand, one could consider - * to implement them. - */ - case VIDIOCGCAPTURE: - { - dprintk(3, KERN_ERR "%s: VIDIOCGCAPTURE not supported\n", - ZR_DEVNAME(zr)); - return -EINVAL; - } - break; - - case VIDIOCSCAPTURE: - { - dprintk(3, KERN_ERR "%s: VIDIOCSCAPTURE not supported\n", - ZR_DEVNAME(zr)); - return -EINVAL; - } - break; - - case BUZIOC_G_PARAMS: - { - struct zoran_params *bparams = arg; - - dprintk(3, KERN_DEBUG "%s: BUZIOC_G_PARAMS\n", ZR_DEVNAME(zr)); - - memset(bparams, 0, sizeof(struct zoran_params)); - bparams->major_version = MAJOR_VERSION; - bparams->minor_version = MINOR_VERSION; - - mutex_lock(&zr->resource_lock); - - bparams->norm = zr->norm; - bparams->input = zr->input; - - bparams->decimation = fh->jpg_settings.decimation; - bparams->HorDcm = fh->jpg_settings.HorDcm; - bparams->VerDcm = fh->jpg_settings.VerDcm; - bparams->TmpDcm = fh->jpg_settings.TmpDcm; - bparams->field_per_buff = fh->jpg_settings.field_per_buff; - bparams->img_x = fh->jpg_settings.img_x; - bparams->img_y = fh->jpg_settings.img_y; - bparams->img_width = fh->jpg_settings.img_width; - bparams->img_height = fh->jpg_settings.img_height; - bparams->odd_even = fh->jpg_settings.odd_even; - - bparams->quality = fh->jpg_settings.jpg_comp.quality; - bparams->APPn = fh->jpg_settings.jpg_comp.APPn; - bparams->APP_len = fh->jpg_settings.jpg_comp.APP_len; - memcpy(bparams->APP_data, - fh->jpg_settings.jpg_comp.APP_data, - sizeof(bparams->APP_data)); - bparams->COM_len = zr->jpg_settings.jpg_comp.COM_len; - memcpy(bparams->COM_data, - fh->jpg_settings.jpg_comp.COM_data, - sizeof(bparams->COM_data)); - bparams->jpeg_markers = - fh->jpg_settings.jpg_comp.jpeg_markers; - - mutex_unlock(&zr->resource_lock); - - bparams->VFIFO_FB = 0; - - return 0; - } - break; - - case BUZIOC_S_PARAMS: - { - struct zoran_params *bparams = arg; - int res = 0; - - dprintk(3, KERN_DEBUG "%s: BUZIOC_S_PARAMS\n", ZR_DEVNAME(zr)); - - settings.decimation = bparams->decimation; - settings.HorDcm = bparams->HorDcm; - settings.VerDcm = bparams->VerDcm; - settings.TmpDcm = bparams->TmpDcm; - settings.field_per_buff = bparams->field_per_buff; - settings.img_x = bparams->img_x; - settings.img_y = bparams->img_y; - settings.img_width = bparams->img_width; - settings.img_height = bparams->img_height; - settings.odd_even = bparams->odd_even; - - settings.jpg_comp.quality = bparams->quality; - settings.jpg_comp.APPn = bparams->APPn; - settings.jpg_comp.APP_len = bparams->APP_len; - memcpy(settings.jpg_comp.APP_data, bparams->APP_data, - sizeof(bparams->APP_data)); - settings.jpg_comp.COM_len = bparams->COM_len; - memcpy(settings.jpg_comp.COM_data, bparams->COM_data, - sizeof(bparams->COM_data)); - settings.jpg_comp.jpeg_markers = bparams->jpeg_markers; - - mutex_lock(&zr->resource_lock); - - if (zr->codec_mode != BUZ_MODE_IDLE) { - dprintk(1, - KERN_ERR - "%s: BUZIOC_S_PARAMS called, but Buz in capture/playback mode\n", - ZR_DEVNAME(zr)); - res = -EINVAL; - goto sparams_unlock_and_return; - } - - /* Check the params first before overwriting our - * nternal values */ - if (zoran_check_jpg_settings(zr, &settings)) { - res = -EINVAL; - goto sparams_unlock_and_return; - } - - fh->jpg_settings = settings; - sparams_unlock_and_return: - mutex_unlock(&zr->resource_lock); - - return res; - } - break; - - case BUZIOC_REQBUFS: - { - struct zoran_requestbuffers *breq = arg; - int res = 0; - - dprintk(3, - KERN_DEBUG - "%s: BUZIOC_REQBUFS - count=%lu, size=%lu\n", - ZR_DEVNAME(zr), breq->count, breq->size); - - /* Enforce reasonable lower and upper limits */ - if (breq->count < 4) - breq->count = 4; /* Could be choosen smaller */ - if (breq->count > jpg_nbufs) - breq->count = jpg_nbufs; - breq->size = PAGE_ALIGN(breq->size); - if (breq->size < 8192) - breq->size = 8192; /* Arbitrary */ - /* breq->size is limited by 1 page for the stat_com - * tables to a Maximum of 2 MB */ - if (breq->size > jpg_bufsize) - breq->size = jpg_bufsize; - if (fh->jpg_buffers.need_contiguous && - breq->size > MAX_KMALLOC_MEM) - breq->size = MAX_KMALLOC_MEM; - - mutex_lock(&zr->resource_lock); - - if (fh->jpg_buffers.allocated || fh->v4l_buffers.allocated) { - dprintk(1, - KERN_ERR - "%s: BUZIOC_REQBUFS - buffers allready allocated\n", - ZR_DEVNAME(zr)); - res = -EBUSY; - goto jpgreqbuf_unlock_and_return; - } - - fh->jpg_buffers.num_buffers = breq->count; - fh->jpg_buffers.buffer_size = breq->size; - - if (jpg_fbuffer_alloc(file)) { - res = -ENOMEM; - goto jpgreqbuf_unlock_and_return; - } - - /* The next mmap will map the MJPEG buffers - could - * also be *_PLAY, but it doesn't matter here */ - fh->map_mode = ZORAN_MAP_MODE_JPG_REC; - jpgreqbuf_unlock_and_return: - mutex_unlock(&zr->resource_lock); - - return res; - } - break; - - case BUZIOC_QBUF_CAPT: - { - int *frame = arg, res; - - dprintk(3, KERN_DEBUG "%s: BUZIOC_QBUF_CAPT - frame=%d\n", - ZR_DEVNAME(zr), *frame); - - mutex_lock(&zr->resource_lock); - res = jpg_qbuf(file, *frame, BUZ_MODE_MOTION_COMPRESS); - mutex_unlock(&zr->resource_lock); - - return res; - } - break; - - case BUZIOC_QBUF_PLAY: - { - int *frame = arg, res; - - dprintk(3, KERN_DEBUG "%s: BUZIOC_QBUF_PLAY - frame=%d\n", - ZR_DEVNAME(zr), *frame); - - mutex_lock(&zr->resource_lock); - res = jpg_qbuf(file, *frame, BUZ_MODE_MOTION_DECOMPRESS); - mutex_unlock(&zr->resource_lock); - - return res; - } - break; - - case BUZIOC_SYNC: - { - struct zoran_sync *bsync = arg; - int res; - - dprintk(3, KERN_DEBUG "%s: BUZIOC_SYNC\n", ZR_DEVNAME(zr)); - - mutex_lock(&zr->resource_lock); - res = jpg_sync(file, bsync); - mutex_unlock(&zr->resource_lock); - - return res; - } - break; - - case BUZIOC_G_STATUS: - { - struct zoran_status *bstat = arg; - int norm, input, status, res = 0; - - dprintk(3, KERN_DEBUG "%s: BUZIOC_G_STATUS\n", ZR_DEVNAME(zr)); - - if (zr->codec_mode != BUZ_MODE_IDLE) { - dprintk(1, - KERN_ERR - "%s: BUZIOC_G_STATUS called but Buz in capture/playback mode\n", - ZR_DEVNAME(zr)); - return -EINVAL; - } - - input = zr->card.input[bstat->input].muxsel; - norm = VIDEO_MODE_AUTO; - - mutex_lock(&zr->resource_lock); - - if (zr->codec_mode != BUZ_MODE_IDLE) { - dprintk(1, - KERN_ERR - "%s: BUZIOC_G_STATUS called, but Buz in capture/playback mode\n", - ZR_DEVNAME(zr)); - res = -EINVAL; - goto gstat_unlock_and_return; - } - - decoder_command(zr, DECODER_SET_INPUT, &input); - decoder_command(zr, DECODER_SET_NORM, &norm); - - /* sleep 1 second */ - ssleep(1); - - /* Get status of video decoder */ - decoder_command(zr, DECODER_GET_STATUS, &status); - - /* restore previous input and norm */ - input = zr->card.input[zr->input].muxsel; - decoder_command(zr, DECODER_SET_INPUT, &input); - decoder_command(zr, DECODER_SET_NORM, &zr->norm); - gstat_unlock_and_return: - mutex_unlock(&zr->resource_lock); - - if (!res) { - bstat->signal = - (status & DECODER_STATUS_GOOD) ? 1 : 0; - if (status & DECODER_STATUS_NTSC) - bstat->norm = VIDEO_MODE_NTSC; - else if (status & DECODER_STATUS_SECAM) - bstat->norm = VIDEO_MODE_SECAM; - else - bstat->norm = VIDEO_MODE_PAL; - - bstat->color = - (status & DECODER_STATUS_COLOR) ? 1 : 0; - } - - return res; - } - break; - - /* The new video4linux2 capture interface - much nicer than video4linux1, since - * it allows for integrating the JPEG capturing calls inside standard v4l2 - */ - - case VIDIOC_QUERYCAP: - { - struct v4l2_capability *cap = arg; - - dprintk(3, KERN_DEBUG "%s: VIDIOC_QUERYCAP\n", ZR_DEVNAME(zr)); - - memset(cap, 0, sizeof(*cap)); - strncpy(cap->card, ZR_DEVNAME(zr), sizeof(cap->card)-1); - strncpy(cap->driver, "zoran", sizeof(cap->driver)-1); - snprintf(cap->bus_info, sizeof(cap->bus_info), "PCI:%s", - pci_name(zr->pci_dev)); - cap->version = - KERNEL_VERSION(MAJOR_VERSION, MINOR_VERSION, - RELEASE_VERSION); - cap->capabilities = ZORAN_V4L2_VID_FLAGS; - - return 0; - } - break; - - case VIDIOC_ENUM_FMT: - { - struct v4l2_fmtdesc *fmt = arg; - int index = fmt->index, num = -1, i, flag = 0, type = - fmt->type; - - dprintk(3, KERN_DEBUG "%s: VIDIOC_ENUM_FMT - index=%d\n", - ZR_DEVNAME(zr), fmt->index); - - switch (fmt->type) { - case V4L2_BUF_TYPE_VIDEO_CAPTURE: - flag = ZORAN_FORMAT_CAPTURE; - break; - case V4L2_BUF_TYPE_VIDEO_OUTPUT: - flag = ZORAN_FORMAT_PLAYBACK; - break; - case V4L2_BUF_TYPE_VIDEO_OVERLAY: - flag = ZORAN_FORMAT_OVERLAY; - break; - default: - dprintk(1, - KERN_ERR - "%s: VIDIOC_ENUM_FMT - unknown type %d\n", - ZR_DEVNAME(zr), fmt->type); - return -EINVAL; - } - - for (i = 0; i < NUM_FORMATS; i++) { - if (zoran_formats[i].flags & flag) - num++; - if (num == fmt->index) - break; - } - if (fmt->index < 0 /* late, but not too late */ || - i == NUM_FORMATS) - return -EINVAL; - - memset(fmt, 0, sizeof(*fmt)); - fmt->index = index; - fmt->type = type; - strncpy(fmt->description, zoran_formats[i].name, sizeof(fmt->description)-1); - fmt->pixelformat = zoran_formats[i].fourcc; - if (zoran_formats[i].flags & ZORAN_FORMAT_COMPRESSED) - fmt->flags |= V4L2_FMT_FLAG_COMPRESSED; - - return 0; - } - break; - - case VIDIOC_G_FMT: - { - struct v4l2_format *fmt = arg; - int type = fmt->type; - - dprintk(5, KERN_DEBUG "%s: VIDIOC_G_FMT\n", ZR_DEVNAME(zr)); - - memset(fmt, 0, sizeof(*fmt)); - fmt->type = type; - - switch (fmt->type) { - case V4L2_BUF_TYPE_VIDEO_OVERLAY: - - mutex_lock(&zr->resource_lock); - - fmt->fmt.win.w.left = fh->overlay_settings.x; - fmt->fmt.win.w.top = fh->overlay_settings.y; - fmt->fmt.win.w.width = fh->overlay_settings.width; - fmt->fmt.win.w.height = - fh->overlay_settings.height; - if (fh->overlay_settings.width * 2 > - BUZ_MAX_HEIGHT) - fmt->fmt.win.field = V4L2_FIELD_INTERLACED; - else - fmt->fmt.win.field = V4L2_FIELD_TOP; - - mutex_unlock(&zr->resource_lock); - - break; - - case V4L2_BUF_TYPE_VIDEO_CAPTURE: - case V4L2_BUF_TYPE_VIDEO_OUTPUT: - - mutex_lock(&zr->resource_lock); - - if (fmt->type == V4L2_BUF_TYPE_VIDEO_CAPTURE && - fh->map_mode == ZORAN_MAP_MODE_RAW) { - - fmt->fmt.pix.width = - fh->v4l_settings.width; - fmt->fmt.pix.height = - fh->v4l_settings.height; - fmt->fmt.pix.sizeimage = - fh->v4l_settings.bytesperline * - fh->v4l_settings.height; - fmt->fmt.pix.pixelformat = - fh->v4l_settings.format->fourcc; - fmt->fmt.pix.colorspace = - fh->v4l_settings.format->colorspace; - fmt->fmt.pix.bytesperline = - fh->v4l_settings.bytesperline; - if (BUZ_MAX_HEIGHT < - (fh->v4l_settings.height * 2)) - fmt->fmt.pix.field = - V4L2_FIELD_INTERLACED; - else - fmt->fmt.pix.field = - V4L2_FIELD_TOP; - - } else { - - fmt->fmt.pix.width = - fh->jpg_settings.img_width / - fh->jpg_settings.HorDcm; - fmt->fmt.pix.height = - fh->jpg_settings.img_height / - (fh->jpg_settings.VerDcm * - fh->jpg_settings.TmpDcm); - fmt->fmt.pix.sizeimage = - zoran_v4l2_calc_bufsize(&fh-> - jpg_settings); - fmt->fmt.pix.pixelformat = - V4L2_PIX_FMT_MJPEG; - if (fh->jpg_settings.TmpDcm == 1) - fmt->fmt.pix.field = - (fh->jpg_settings. - odd_even ? V4L2_FIELD_SEQ_BT : - V4L2_FIELD_SEQ_BT); - else - fmt->fmt.pix.field = - (fh->jpg_settings. - odd_even ? V4L2_FIELD_TOP : - V4L2_FIELD_BOTTOM); - - fmt->fmt.pix.bytesperline = 0; - fmt->fmt.pix.colorspace = - V4L2_COLORSPACE_SMPTE170M; - } - - mutex_unlock(&zr->resource_lock); - - break; - - default: - dprintk(1, - KERN_ERR - "%s: VIDIOC_G_FMT - unsupported type %d\n", - ZR_DEVNAME(zr), fmt->type); - return -EINVAL; - } - return 0; - } - break; - - case VIDIOC_S_FMT: - { - struct v4l2_format *fmt = arg; - int i, res = 0; - __le32 printformat; - - dprintk(3, KERN_DEBUG "%s: VIDIOC_S_FMT - type=%d, ", - ZR_DEVNAME(zr), fmt->type); - - switch (fmt->type) { - case V4L2_BUF_TYPE_VIDEO_OVERLAY: - - dprintk(3, "x=%d, y=%d, w=%d, h=%d, cnt=%d, map=0x%p\n", - fmt->fmt.win.w.left, fmt->fmt.win.w.top, - fmt->fmt.win.w.width, - fmt->fmt.win.w.height, - fmt->fmt.win.clipcount, - fmt->fmt.win.bitmap); - mutex_lock(&zr->resource_lock); - res = - setup_window(file, fmt->fmt.win.w.left, - fmt->fmt.win.w.top, - fmt->fmt.win.w.width, - fmt->fmt.win.w.height, - (struct video_clip __user *) - fmt->fmt.win.clips, - fmt->fmt.win.clipcount, - fmt->fmt.win.bitmap); - mutex_unlock(&zr->resource_lock); - return res; - break; - - case V4L2_BUF_TYPE_VIDEO_CAPTURE: - case V4L2_BUF_TYPE_VIDEO_OUTPUT: - - printformat = - __cpu_to_le32(fmt->fmt.pix.pixelformat); - dprintk(3, "size=%dx%d, fmt=0x%x (%4.4s)\n", - fmt->fmt.pix.width, fmt->fmt.pix.height, - fmt->fmt.pix.pixelformat, - (char *) &printformat); - - /* we can be requested to do JPEG/raw playback/capture */ - if (! - (fmt->type == V4L2_BUF_TYPE_VIDEO_CAPTURE || - (fmt->type == V4L2_BUF_TYPE_VIDEO_OUTPUT && - fmt->fmt.pix.pixelformat == - V4L2_PIX_FMT_MJPEG))) { - dprintk(1, - KERN_ERR - "%s: VIDIOC_S_FMT - unknown type %d/0x%x(%4.4s) combination\n", - ZR_DEVNAME(zr), fmt->type, - fmt->fmt.pix.pixelformat, - (char *) &printformat); - return -EINVAL; - } - - if (fmt->fmt.pix.pixelformat == V4L2_PIX_FMT_MJPEG) { - mutex_lock(&zr->resource_lock); - - settings = fh->jpg_settings; - - if (fh->v4l_buffers.allocated || - fh->jpg_buffers.allocated) { - dprintk(1, - KERN_ERR - "%s: VIDIOC_S_FMT - cannot change capture mode\n", - ZR_DEVNAME(zr)); - res = -EBUSY; - goto sfmtjpg_unlock_and_return; - } - - /* we actually need to set 'real' parameters now */ - if ((fmt->fmt.pix.height * 2) > - BUZ_MAX_HEIGHT) - settings.TmpDcm = 1; - else - settings.TmpDcm = 2; - settings.decimation = 0; - if (fmt->fmt.pix.height <= - fh->jpg_settings.img_height / 2) - settings.VerDcm = 2; - else - settings.VerDcm = 1; - if (fmt->fmt.pix.width <= - fh->jpg_settings.img_width / 4) - settings.HorDcm = 4; - else if (fmt->fmt.pix.width <= - fh->jpg_settings.img_width / 2) - settings.HorDcm = 2; - else - settings.HorDcm = 1; - if (settings.TmpDcm == 1) - settings.field_per_buff = 2; - else - settings.field_per_buff = 1; - - /* check */ - if ((res = - zoran_check_jpg_settings(zr, - &settings))) - goto sfmtjpg_unlock_and_return; - - /* it's ok, so set them */ - fh->jpg_settings = settings; - - /* tell the user what we actually did */ - fmt->fmt.pix.width = - settings.img_width / settings.HorDcm; - fmt->fmt.pix.height = - settings.img_height * 2 / - (settings.TmpDcm * settings.VerDcm); - if (settings.TmpDcm == 1) - fmt->fmt.pix.field = - (fh->jpg_settings. - odd_even ? V4L2_FIELD_SEQ_TB : - V4L2_FIELD_SEQ_BT); - else - fmt->fmt.pix.field = - (fh->jpg_settings. - odd_even ? V4L2_FIELD_TOP : - V4L2_FIELD_BOTTOM); - fh->jpg_buffers.buffer_size = - zoran_v4l2_calc_bufsize(&fh-> - jpg_settings); - fmt->fmt.pix.bytesperline = 0; - fmt->fmt.pix.sizeimage = - fh->jpg_buffers.buffer_size; - fmt->fmt.pix.colorspace = - V4L2_COLORSPACE_SMPTE170M; - - /* we hereby abuse this variable to show that - * we're gonna do mjpeg capture */ - fh->map_mode = - (fmt->type == - V4L2_BUF_TYPE_VIDEO_CAPTURE) ? - ZORAN_MAP_MODE_JPG_REC : - ZORAN_MAP_MODE_JPG_PLAY; - sfmtjpg_unlock_and_return: - mutex_unlock(&zr->resource_lock); - } else { - for (i = 0; i < NUM_FORMATS; i++) - if (fmt->fmt.pix.pixelformat == - zoran_formats[i].fourcc) - break; - if (i == NUM_FORMATS) { - dprintk(1, - KERN_ERR - "%s: VIDIOC_S_FMT - unknown/unsupported format 0x%x (%4.4s)\n", - ZR_DEVNAME(zr), - fmt->fmt.pix.pixelformat, - (char *) &printformat); - return -EINVAL; - } - mutex_lock(&zr->resource_lock); - if (fh->jpg_buffers.allocated || - (fh->v4l_buffers.allocated && - fh->v4l_buffers.active != - ZORAN_FREE)) { - dprintk(1, - KERN_ERR - "%s: VIDIOC_S_FMT - cannot change capture mode\n", - ZR_DEVNAME(zr)); - res = -EBUSY; - goto sfmtv4l_unlock_and_return; - } - if (fmt->fmt.pix.height > BUZ_MAX_HEIGHT) - fmt->fmt.pix.height = - BUZ_MAX_HEIGHT; - if (fmt->fmt.pix.width > BUZ_MAX_WIDTH) - fmt->fmt.pix.width = BUZ_MAX_WIDTH; - - if ((res = - zoran_v4l_set_format(file, - fmt->fmt.pix. - width, - fmt->fmt.pix. - height, - &zoran_formats - [i]))) - goto sfmtv4l_unlock_and_return; - - /* tell the user the - * results/missing stuff */ - fmt->fmt.pix.bytesperline = - fh->v4l_settings.bytesperline; - fmt->fmt.pix.sizeimage = - fh->v4l_settings.height * - fh->v4l_settings.bytesperline; - fmt->fmt.pix.colorspace = - fh->v4l_settings.format->colorspace; - if (BUZ_MAX_HEIGHT < - (fh->v4l_settings.height * 2)) - fmt->fmt.pix.field = - V4L2_FIELD_INTERLACED; - else - fmt->fmt.pix.field = - V4L2_FIELD_TOP; - - fh->map_mode = ZORAN_MAP_MODE_RAW; - sfmtv4l_unlock_and_return: - mutex_unlock(&zr->resource_lock); - } - - break; - - default: - dprintk(3, "unsupported\n"); - dprintk(1, - KERN_ERR - "%s: VIDIOC_S_FMT - unsupported type %d\n", - ZR_DEVNAME(zr), fmt->type); - return -EINVAL; - } - - return res; - } - break; - - case VIDIOC_G_FBUF: - { - struct v4l2_framebuffer *fb = arg; - - dprintk(3, KERN_DEBUG "%s: VIDIOC_G_FBUF\n", ZR_DEVNAME(zr)); - - memset(fb, 0, sizeof(*fb)); - mutex_lock(&zr->resource_lock); - fb->base = zr->buffer.base; - fb->fmt.width = zr->buffer.width; - fb->fmt.height = zr->buffer.height; - if (zr->overlay_settings.format) { - fb->fmt.pixelformat = - fh->overlay_settings.format->fourcc; - } - fb->fmt.bytesperline = zr->buffer.bytesperline; - mutex_unlock(&zr->resource_lock); - fb->fmt.colorspace = V4L2_COLORSPACE_SRGB; - fb->fmt.field = V4L2_FIELD_INTERLACED; - fb->flags = V4L2_FBUF_FLAG_OVERLAY; - fb->capability = V4L2_FBUF_CAP_LIST_CLIPPING; - - return 0; - } - break; - - case VIDIOC_S_FBUF: - { - int i, res = 0; - struct v4l2_framebuffer *fb = arg; - __le32 printformat = __cpu_to_le32(fb->fmt.pixelformat); - - dprintk(3, - KERN_DEBUG - "%s: VIDIOC_S_FBUF - base=0x%p, size=%dx%d, bpl=%d, fmt=0x%x (%4.4s)\n", - ZR_DEVNAME(zr), fb->base, fb->fmt.width, fb->fmt.height, - fb->fmt.bytesperline, fb->fmt.pixelformat, - (char *) &printformat); - - for (i = 0; i < NUM_FORMATS; i++) - if (zoran_formats[i].fourcc == fb->fmt.pixelformat) - break; - if (i == NUM_FORMATS) { - dprintk(1, - KERN_ERR - "%s: VIDIOC_S_FBUF - format=0x%x (%4.4s) not allowed\n", - ZR_DEVNAME(zr), fb->fmt.pixelformat, - (char *) &printformat); - return -EINVAL; - } - - mutex_lock(&zr->resource_lock); - res = - setup_fbuffer(file, fb->base, &zoran_formats[i], - fb->fmt.width, fb->fmt.height, - fb->fmt.bytesperline); - mutex_unlock(&zr->resource_lock); - - return res; - } - break; - - case VIDIOC_OVERLAY: - { - int *on = arg, res; - - dprintk(3, KERN_DEBUG "%s: VIDIOC_PREVIEW - on=%d\n", - ZR_DEVNAME(zr), *on); - - mutex_lock(&zr->resource_lock); - res = setup_overlay(file, *on); - mutex_unlock(&zr->resource_lock); - - return res; - } - break; - - case VIDIOC_REQBUFS: - { - struct v4l2_requestbuffers *req = arg; - int res = 0; - - dprintk(3, KERN_DEBUG "%s: VIDIOC_REQBUFS - type=%d\n", - ZR_DEVNAME(zr), req->type); - - if (req->memory != V4L2_MEMORY_MMAP) { - dprintk(1, - KERN_ERR - "%s: only MEMORY_MMAP capture is supported, not %d\n", - ZR_DEVNAME(zr), req->memory); - return -EINVAL; - } - - mutex_lock(&zr->resource_lock); - - if (fh->v4l_buffers.allocated || fh->jpg_buffers.allocated) { - dprintk(1, - KERN_ERR - "%s: VIDIOC_REQBUFS - buffers allready allocated\n", - ZR_DEVNAME(zr)); - res = -EBUSY; - goto v4l2reqbuf_unlock_and_return; - } - - if (fh->map_mode == ZORAN_MAP_MODE_RAW && - req->type == V4L2_BUF_TYPE_VIDEO_CAPTURE) { - - /* control user input */ - if (req->count < 2) - req->count = 2; - if (req->count > v4l_nbufs) - req->count = v4l_nbufs; - fh->v4l_buffers.num_buffers = req->count; - - if (v4l_fbuffer_alloc(file)) { - res = -ENOMEM; - goto v4l2reqbuf_unlock_and_return; - } - - /* The next mmap will map the V4L buffers */ - fh->map_mode = ZORAN_MAP_MODE_RAW; - - } else if (fh->map_mode == ZORAN_MAP_MODE_JPG_REC || - fh->map_mode == ZORAN_MAP_MODE_JPG_PLAY) { - - /* we need to calculate size ourselves now */ - if (req->count < 4) - req->count = 4; - if (req->count > jpg_nbufs) - req->count = jpg_nbufs; - fh->jpg_buffers.num_buffers = req->count; - fh->jpg_buffers.buffer_size = - zoran_v4l2_calc_bufsize(&fh->jpg_settings); - - if (jpg_fbuffer_alloc(file)) { - res = -ENOMEM; - goto v4l2reqbuf_unlock_and_return; - } - - /* The next mmap will map the MJPEG buffers */ - if (req->type == V4L2_BUF_TYPE_VIDEO_CAPTURE) - fh->map_mode = ZORAN_MAP_MODE_JPG_REC; - else - fh->map_mode = ZORAN_MAP_MODE_JPG_PLAY; - - } else { - dprintk(1, - KERN_ERR - "%s: VIDIOC_REQBUFS - unknown type %d\n", - ZR_DEVNAME(zr), req->type); - res = -EINVAL; - goto v4l2reqbuf_unlock_and_return; - } - v4l2reqbuf_unlock_and_return: - mutex_unlock(&zr->resource_lock); - - return 0; - } - break; - - case VIDIOC_QUERYBUF: - { - struct v4l2_buffer *buf = arg; - __u32 type = buf->type; - int index = buf->index, res; - - dprintk(3, - KERN_DEBUG - "%s: VIDIOC_QUERYBUF - index=%d, type=%d\n", - ZR_DEVNAME(zr), buf->index, buf->type); - - memset(buf, 0, sizeof(*buf)); - buf->type = type; - buf->index = index; - - mutex_lock(&zr->resource_lock); - res = zoran_v4l2_buffer_status(file, buf, buf->index); - mutex_unlock(&zr->resource_lock); - - return res; - } - break; - - case VIDIOC_QBUF: - { - struct v4l2_buffer *buf = arg; - int res = 0, codec_mode, buf_type; - - dprintk(3, - KERN_DEBUG "%s: VIDIOC_QBUF - type=%d, index=%d\n", - ZR_DEVNAME(zr), buf->type, buf->index); - - mutex_lock(&zr->resource_lock); - - switch (fh->map_mode) { - case ZORAN_MAP_MODE_RAW: - if (buf->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) { - dprintk(1, - KERN_ERR - "%s: VIDIOC_QBUF - invalid buf->type=%d for map_mode=%d\n", - ZR_DEVNAME(zr), buf->type, fh->map_mode); - res = -EINVAL; - goto qbuf_unlock_and_return; - } - - res = zoran_v4l_queue_frame(file, buf->index); - if (res) - goto qbuf_unlock_and_return; - if (!zr->v4l_memgrab_active && - fh->v4l_buffers.active == ZORAN_LOCKED) - zr36057_set_memgrab(zr, 1); - break; - - case ZORAN_MAP_MODE_JPG_REC: - case ZORAN_MAP_MODE_JPG_PLAY: - if (fh->map_mode == ZORAN_MAP_MODE_JPG_PLAY) { - buf_type = V4L2_BUF_TYPE_VIDEO_OUTPUT; - codec_mode = BUZ_MODE_MOTION_DECOMPRESS; - } else { - buf_type = V4L2_BUF_TYPE_VIDEO_CAPTURE; - codec_mode = BUZ_MODE_MOTION_COMPRESS; - } - - if (buf->type != buf_type) { - dprintk(1, - KERN_ERR - "%s: VIDIOC_QBUF - invalid buf->type=%d for map_mode=%d\n", - ZR_DEVNAME(zr), buf->type, fh->map_mode); - res = -EINVAL; - goto qbuf_unlock_and_return; - } - - res = - zoran_jpg_queue_frame(file, buf->index, - codec_mode); - if (res != 0) - goto qbuf_unlock_and_return; - if (zr->codec_mode == BUZ_MODE_IDLE && - fh->jpg_buffers.active == ZORAN_LOCKED) { - zr36057_enable_jpg(zr, codec_mode); - } - break; - - default: - dprintk(1, - KERN_ERR - "%s: VIDIOC_QBUF - unsupported type %d\n", - ZR_DEVNAME(zr), buf->type); - res = -EINVAL; - goto qbuf_unlock_and_return; - } - qbuf_unlock_and_return: - mutex_unlock(&zr->resource_lock); - - return res; - } - break; - - case VIDIOC_DQBUF: - { - struct v4l2_buffer *buf = arg; - int res = 0, buf_type, num = -1; /* compiler borks here (?) */ - - dprintk(3, KERN_DEBUG "%s: VIDIOC_DQBUF - type=%d\n", - ZR_DEVNAME(zr), buf->type); - - mutex_lock(&zr->resource_lock); - - switch (fh->map_mode) { - case ZORAN_MAP_MODE_RAW: - if (buf->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) { - dprintk(1, - KERN_ERR - "%s: VIDIOC_QBUF - invalid buf->type=%d for map_mode=%d\n", - ZR_DEVNAME(zr), buf->type, fh->map_mode); - res = -EINVAL; - goto dqbuf_unlock_and_return; - } - - num = zr->v4l_pend[zr->v4l_sync_tail & V4L_MASK_FRAME]; - if (file->f_flags & O_NONBLOCK && - zr->v4l_buffers.buffer[num].state != - BUZ_STATE_DONE) { - res = -EAGAIN; - goto dqbuf_unlock_and_return; - } - res = v4l_sync(file, num); - if (res) - goto dqbuf_unlock_and_return; - else - zr->v4l_sync_tail++; - res = zoran_v4l2_buffer_status(file, buf, num); - break; - - case ZORAN_MAP_MODE_JPG_REC: - case ZORAN_MAP_MODE_JPG_PLAY: - { - struct zoran_sync bs; - - if (fh->map_mode == ZORAN_MAP_MODE_JPG_PLAY) - buf_type = V4L2_BUF_TYPE_VIDEO_OUTPUT; - else - buf_type = V4L2_BUF_TYPE_VIDEO_CAPTURE; - - if (buf->type != buf_type) { - dprintk(1, - KERN_ERR - "%s: VIDIOC_QBUF - invalid buf->type=%d for map_mode=%d\n", - ZR_DEVNAME(zr), buf->type, fh->map_mode); - res = -EINVAL; - goto dqbuf_unlock_and_return; - } - - num = - zr->jpg_pend[zr-> - jpg_que_tail & BUZ_MASK_FRAME]; - - if (file->f_flags & O_NONBLOCK && - zr->jpg_buffers.buffer[num].state != - BUZ_STATE_DONE) { - res = -EAGAIN; - goto dqbuf_unlock_and_return; - } - res = jpg_sync(file, &bs); - if (res) - goto dqbuf_unlock_and_return; - res = - zoran_v4l2_buffer_status(file, buf, bs.frame); - break; - } - - default: - dprintk(1, - KERN_ERR - "%s: VIDIOC_DQBUF - unsupported type %d\n", - ZR_DEVNAME(zr), buf->type); - res = -EINVAL; - goto dqbuf_unlock_and_return; - } - dqbuf_unlock_and_return: - mutex_unlock(&zr->resource_lock); - - return res; - } - break; - - case VIDIOC_STREAMON: - { - int res = 0; - - dprintk(3, KERN_DEBUG "%s: VIDIOC_STREAMON\n", ZR_DEVNAME(zr)); - - mutex_lock(&zr->resource_lock); - - switch (fh->map_mode) { - case ZORAN_MAP_MODE_RAW: /* raw capture */ - if (zr->v4l_buffers.active != ZORAN_ACTIVE || - fh->v4l_buffers.active != ZORAN_ACTIVE) { - res = -EBUSY; - goto strmon_unlock_and_return; - } - - zr->v4l_buffers.active = fh->v4l_buffers.active = - ZORAN_LOCKED; - zr->v4l_settings = fh->v4l_settings; - - zr->v4l_sync_tail = zr->v4l_pend_tail; - if (!zr->v4l_memgrab_active && - zr->v4l_pend_head != zr->v4l_pend_tail) { - zr36057_set_memgrab(zr, 1); - } - break; - - case ZORAN_MAP_MODE_JPG_REC: - case ZORAN_MAP_MODE_JPG_PLAY: - /* what is the codec mode right now? */ - if (zr->jpg_buffers.active != ZORAN_ACTIVE || - fh->jpg_buffers.active != ZORAN_ACTIVE) { - res = -EBUSY; - goto strmon_unlock_and_return; - } - - zr->jpg_buffers.active = fh->jpg_buffers.active = - ZORAN_LOCKED; - - if (zr->jpg_que_head != zr->jpg_que_tail) { - /* Start the jpeg codec when the first frame is queued */ - jpeg_start(zr); - } - - break; - default: - dprintk(1, - KERN_ERR - "%s: VIDIOC_STREAMON - invalid map mode %d\n", - ZR_DEVNAME(zr), fh->map_mode); - res = -EINVAL; - goto strmon_unlock_and_return; - } - strmon_unlock_and_return: - mutex_unlock(&zr->resource_lock); - - return res; - } - break; - - case VIDIOC_STREAMOFF: - { - int i, res = 0; - - dprintk(3, KERN_DEBUG "%s: VIDIOC_STREAMOFF\n", ZR_DEVNAME(zr)); - - mutex_lock(&zr->resource_lock); - - switch (fh->map_mode) { - case ZORAN_MAP_MODE_RAW: /* raw capture */ - if (fh->v4l_buffers.active == ZORAN_FREE && - zr->v4l_buffers.active != ZORAN_FREE) { - res = -EPERM; /* stay off other's settings! */ - goto strmoff_unlock_and_return; - } - if (zr->v4l_buffers.active == ZORAN_FREE) - goto strmoff_unlock_and_return; - - /* unload capture */ - if (zr->v4l_memgrab_active) { - unsigned long flags; - - spin_lock_irqsave(&zr->spinlock, flags); - zr36057_set_memgrab(zr, 0); - spin_unlock_irqrestore(&zr->spinlock, flags); - } - - for (i = 0; i < fh->v4l_buffers.num_buffers; i++) - zr->v4l_buffers.buffer[i].state = - BUZ_STATE_USER; - fh->v4l_buffers = zr->v4l_buffers; - - zr->v4l_buffers.active = fh->v4l_buffers.active = - ZORAN_FREE; - - zr->v4l_grab_seq = 0; - zr->v4l_pend_head = zr->v4l_pend_tail = 0; - zr->v4l_sync_tail = 0; - - break; - - case ZORAN_MAP_MODE_JPG_REC: - case ZORAN_MAP_MODE_JPG_PLAY: - if (fh->jpg_buffers.active == ZORAN_FREE && - zr->jpg_buffers.active != ZORAN_FREE) { - res = -EPERM; /* stay off other's settings! */ - goto strmoff_unlock_and_return; - } - if (zr->jpg_buffers.active == ZORAN_FREE) - goto strmoff_unlock_and_return; - - res = - jpg_qbuf(file, -1, - (fh->map_mode == - ZORAN_MAP_MODE_JPG_REC) ? - BUZ_MODE_MOTION_COMPRESS : - BUZ_MODE_MOTION_DECOMPRESS); - if (res) - goto strmoff_unlock_and_return; - break; - default: - dprintk(1, - KERN_ERR - "%s: VIDIOC_STREAMOFF - invalid map mode %d\n", - ZR_DEVNAME(zr), fh->map_mode); - res = -EINVAL; - goto strmoff_unlock_and_return; - } - strmoff_unlock_and_return: - mutex_unlock(&zr->resource_lock); - - return res; - } - break; - - case VIDIOC_QUERYCTRL: - { - struct v4l2_queryctrl *ctrl = arg; - - dprintk(3, KERN_DEBUG "%s: VIDIOC_QUERYCTRL - id=%d\n", - ZR_DEVNAME(zr), ctrl->id); - - /* we only support hue/saturation/contrast/brightness */ - if (ctrl->id < V4L2_CID_BRIGHTNESS || - ctrl->id > V4L2_CID_HUE) - return -EINVAL; - else { - int id = ctrl->id; - memset(ctrl, 0, sizeof(*ctrl)); - ctrl->id = id; - } - - switch (ctrl->id) { - case V4L2_CID_BRIGHTNESS: - strncpy(ctrl->name, "Brightness", sizeof(ctrl->name)-1); - break; - case V4L2_CID_CONTRAST: - strncpy(ctrl->name, "Contrast", sizeof(ctrl->name)-1); - break; - case V4L2_CID_SATURATION: - strncpy(ctrl->name, "Saturation", sizeof(ctrl->name)-1); - break; - case V4L2_CID_HUE: - strncpy(ctrl->name, "Hue", sizeof(ctrl->name)-1); - break; - } - - ctrl->minimum = 0; - ctrl->maximum = 65535; - ctrl->step = 1; - ctrl->default_value = 32768; - ctrl->type = V4L2_CTRL_TYPE_INTEGER; - - return 0; - } - break; - - case VIDIOC_G_CTRL: - { - struct v4l2_control *ctrl = arg; - - dprintk(3, KERN_DEBUG "%s: VIDIOC_G_CTRL - id=%d\n", - ZR_DEVNAME(zr), ctrl->id); - - /* we only support hue/saturation/contrast/brightness */ - if (ctrl->id < V4L2_CID_BRIGHTNESS || - ctrl->id > V4L2_CID_HUE) - return -EINVAL; - - mutex_lock(&zr->resource_lock); - switch (ctrl->id) { - case V4L2_CID_BRIGHTNESS: - ctrl->value = zr->brightness; - break; - case V4L2_CID_CONTRAST: - ctrl->value = zr->contrast; - break; - case V4L2_CID_SATURATION: - ctrl->value = zr->saturation; - break; - case V4L2_CID_HUE: - ctrl->value = zr->hue; - break; - } - mutex_unlock(&zr->resource_lock); - - return 0; - } - break; - - case VIDIOC_S_CTRL: - { - struct v4l2_control *ctrl = arg; - struct video_picture pict; - - dprintk(3, KERN_DEBUG "%s: VIDIOC_S_CTRL - id=%d\n", - ZR_DEVNAME(zr), ctrl->id); - - /* we only support hue/saturation/contrast/brightness */ - if (ctrl->id < V4L2_CID_BRIGHTNESS || - ctrl->id > V4L2_CID_HUE) - return -EINVAL; - - if (ctrl->value < 0 || ctrl->value > 65535) { - dprintk(1, - KERN_ERR - "%s: VIDIOC_S_CTRL - invalid value %d for id=%d\n", - ZR_DEVNAME(zr), ctrl->value, ctrl->id); - return -EINVAL; - } - - mutex_lock(&zr->resource_lock); - switch (ctrl->id) { - case V4L2_CID_BRIGHTNESS: - zr->brightness = ctrl->value; - break; - case V4L2_CID_CONTRAST: - zr->contrast = ctrl->value; - break; - case V4L2_CID_SATURATION: - zr->saturation = ctrl->value; - break; - case V4L2_CID_HUE: - zr->hue = ctrl->value; - break; - } - pict.brightness = zr->brightness; - pict.contrast = zr->contrast; - pict.colour = zr->saturation; - pict.hue = zr->hue; - - decoder_command(zr, DECODER_SET_PICTURE, &pict); - - mutex_unlock(&zr->resource_lock); - - return 0; - } - break; - - case VIDIOC_ENUMSTD: - { - struct v4l2_standard *std = arg; - - dprintk(3, KERN_DEBUG "%s: VIDIOC_ENUMSTD - index=%d\n", - ZR_DEVNAME(zr), std->index); - - if (std->index < 0 || std->index >= (zr->card.norms + 1)) - return -EINVAL; - else { - int id = std->index; - memset(std, 0, sizeof(*std)); - std->index = id; - } - - if (std->index == zr->card.norms) { - /* if we have autodetect, ... */ - struct video_decoder_capability caps; - decoder_command(zr, DECODER_GET_CAPABILITIES, - &caps); - if (caps.flags & VIDEO_DECODER_AUTO) { - std->id = V4L2_STD_ALL; - strncpy(std->name, "Autodetect", sizeof(std->name)-1); - return 0; - } else - return -EINVAL; - } - switch (std->index) { - case 0: - std->id = V4L2_STD_PAL; - strncpy(std->name, "PAL", sizeof(std->name)-1); - std->frameperiod.numerator = 1; - std->frameperiod.denominator = 25; - std->framelines = zr->card.tvn[0]->Ht; - break; - case 1: - std->id = V4L2_STD_NTSC; - strncpy(std->name, "NTSC", sizeof(std->name)-1); - std->frameperiod.numerator = 1001; - std->frameperiod.denominator = 30000; - std->framelines = zr->card.tvn[1]->Ht; - break; - case 2: - std->id = V4L2_STD_SECAM; - strncpy(std->name, "SECAM", sizeof(std->name)-1); - std->frameperiod.numerator = 1; - std->frameperiod.denominator = 25; - std->framelines = zr->card.tvn[2]->Ht; - break; - } - - return 0; - } - break; - - case VIDIOC_G_STD: - { - v4l2_std_id *std = arg; - int norm; - - dprintk(3, KERN_DEBUG "%s: VIDIOC_G_STD\n", ZR_DEVNAME(zr)); - - mutex_lock(&zr->resource_lock); - norm = zr->norm; - mutex_unlock(&zr->resource_lock); - - switch (norm) { - case VIDEO_MODE_PAL: - *std = V4L2_STD_PAL; - break; - case VIDEO_MODE_NTSC: - *std = V4L2_STD_NTSC; - break; - case VIDEO_MODE_SECAM: - *std = V4L2_STD_SECAM; - break; - } - - return 0; - } - break; - - case VIDIOC_S_STD: - { - int norm = -1, res = 0; - v4l2_std_id *std = arg; - - dprintk(3, KERN_DEBUG "%s: VIDIOC_S_STD - norm=0x%llx\n", - ZR_DEVNAME(zr), (unsigned long long)*std); - - if ((*std & V4L2_STD_PAL) && !(*std & ~V4L2_STD_PAL)) - norm = VIDEO_MODE_PAL; - else if ((*std & V4L2_STD_NTSC) && !(*std & ~V4L2_STD_NTSC)) - norm = VIDEO_MODE_NTSC; - else if ((*std & V4L2_STD_SECAM) && !(*std & ~V4L2_STD_SECAM)) - norm = VIDEO_MODE_SECAM; - else if (*std == V4L2_STD_ALL) - norm = VIDEO_MODE_AUTO; - else { - dprintk(1, - KERN_ERR - "%s: VIDIOC_S_STD - invalid norm 0x%llx\n", - ZR_DEVNAME(zr), (unsigned long long)*std); - return -EINVAL; - } - - mutex_lock(&zr->resource_lock); - if ((res = zoran_set_norm(zr, norm))) - goto sstd_unlock_and_return; - - res = wait_grab_pending(zr); - sstd_unlock_and_return: - mutex_unlock(&zr->resource_lock); - return res; - } - break; - - case VIDIOC_ENUMINPUT: - { - struct v4l2_input *inp = arg; - int status; - - dprintk(3, KERN_DEBUG "%s: VIDIOC_ENUMINPUT - index=%d\n", - ZR_DEVNAME(zr), inp->index); - - if (inp->index < 0 || inp->index >= zr->card.inputs) - return -EINVAL; - else { - int id = inp->index; - memset(inp, 0, sizeof(*inp)); - inp->index = id; - } - - strncpy(inp->name, zr->card.input[inp->index].name, - sizeof(inp->name) - 1); - inp->type = V4L2_INPUT_TYPE_CAMERA; - inp->std = V4L2_STD_ALL; - - /* Get status of video decoder */ - mutex_lock(&zr->resource_lock); - decoder_command(zr, DECODER_GET_STATUS, &status); - mutex_unlock(&zr->resource_lock); - - if (!(status & DECODER_STATUS_GOOD)) { - inp->status |= V4L2_IN_ST_NO_POWER; - inp->status |= V4L2_IN_ST_NO_SIGNAL; - } - if (!(status & DECODER_STATUS_COLOR)) - inp->status |= V4L2_IN_ST_NO_COLOR; - - return 0; - } - break; - - case VIDIOC_G_INPUT: - { - int *input = arg; - - dprintk(3, KERN_DEBUG "%s: VIDIOC_G_INPUT\n", ZR_DEVNAME(zr)); - - mutex_lock(&zr->resource_lock); - *input = zr->input; - mutex_unlock(&zr->resource_lock); - - return 0; - } - break; - - case VIDIOC_S_INPUT: - { - int *input = arg, res = 0; - - dprintk(3, KERN_DEBUG "%s: VIDIOC_S_INPUT - input=%d\n", - ZR_DEVNAME(zr), *input); - - mutex_lock(&zr->resource_lock); - if ((res = zoran_set_input(zr, *input))) - goto sinput_unlock_and_return; - - /* Make sure the changes come into effect */ - res = wait_grab_pending(zr); - sinput_unlock_and_return: - mutex_unlock(&zr->resource_lock); - return res; - } - break; - - case VIDIOC_ENUMOUTPUT: - { - struct v4l2_output *outp = arg; - - dprintk(3, KERN_DEBUG "%s: VIDIOC_ENUMOUTPUT - index=%d\n", - ZR_DEVNAME(zr), outp->index); - - if (outp->index != 0) - return -EINVAL; - - memset(outp, 0, sizeof(*outp)); - outp->index = 0; - outp->type = V4L2_OUTPUT_TYPE_ANALOGVGAOVERLAY; - strncpy(outp->name, "Autodetect", sizeof(outp->name)-1); - - return 0; - } - break; - - case VIDIOC_G_OUTPUT: - { - int *output = arg; - - dprintk(3, KERN_DEBUG "%s: VIDIOC_G_OUTPUT\n", ZR_DEVNAME(zr)); - - *output = 0; - - return 0; - } - break; - - case VIDIOC_S_OUTPUT: - { - int *output = arg; - - dprintk(3, KERN_DEBUG "%s: VIDIOC_S_OUTPUT - output=%d\n", - ZR_DEVNAME(zr), *output); - - if (*output != 0) - return -EINVAL; - - return 0; - } - break; - - /* cropping (sub-frame capture) */ - case VIDIOC_CROPCAP: - { - struct v4l2_cropcap *cropcap = arg; - int type = cropcap->type, res = 0; - - dprintk(3, KERN_ERR "%s: VIDIOC_CROPCAP - type=%d\n", - ZR_DEVNAME(zr), cropcap->type); - - memset(cropcap, 0, sizeof(*cropcap)); - cropcap->type = type; - - mutex_lock(&zr->resource_lock); - - if (cropcap->type != V4L2_BUF_TYPE_VIDEO_OUTPUT && - (cropcap->type != V4L2_BUF_TYPE_VIDEO_CAPTURE || - fh->map_mode == ZORAN_MAP_MODE_RAW)) { - dprintk(1, - KERN_ERR - "%s: VIDIOC_CROPCAP - subcapture only supported for compressed capture\n", - ZR_DEVNAME(zr)); - res = -EINVAL; - goto cropcap_unlock_and_return; - } - - cropcap->bounds.top = cropcap->bounds.left = 0; - cropcap->bounds.width = BUZ_MAX_WIDTH; - cropcap->bounds.height = BUZ_MAX_HEIGHT; - cropcap->defrect.top = cropcap->defrect.left = 0; - cropcap->defrect.width = BUZ_MIN_WIDTH; - cropcap->defrect.height = BUZ_MIN_HEIGHT; - cropcap_unlock_and_return: - mutex_unlock(&zr->resource_lock); - return res; - } - break; - - case VIDIOC_G_CROP: - { - struct v4l2_crop *crop = arg; - int type = crop->type, res = 0; - - dprintk(3, KERN_ERR "%s: VIDIOC_G_CROP - type=%d\n", - ZR_DEVNAME(zr), crop->type); - - memset(crop, 0, sizeof(*crop)); - crop->type = type; - - mutex_lock(&zr->resource_lock); - - if (crop->type != V4L2_BUF_TYPE_VIDEO_OUTPUT && - (crop->type != V4L2_BUF_TYPE_VIDEO_CAPTURE || - fh->map_mode == ZORAN_MAP_MODE_RAW)) { - dprintk(1, - KERN_ERR - "%s: VIDIOC_G_CROP - subcapture only supported for compressed capture\n", - ZR_DEVNAME(zr)); - res = -EINVAL; - goto gcrop_unlock_and_return; - } - - crop->c.top = fh->jpg_settings.img_y; - crop->c.left = fh->jpg_settings.img_x; - crop->c.width = fh->jpg_settings.img_width; - crop->c.height = fh->jpg_settings.img_height; - - gcrop_unlock_and_return: - mutex_unlock(&zr->resource_lock); - - return res; - } - break; - - case VIDIOC_S_CROP: - { - struct v4l2_crop *crop = arg; - int res = 0; - - settings = fh->jpg_settings; - - dprintk(3, - KERN_ERR - "%s: VIDIOC_S_CROP - type=%d, x=%d,y=%d,w=%d,h=%d\n", - ZR_DEVNAME(zr), crop->type, crop->c.left, crop->c.top, - crop->c.width, crop->c.height); - - mutex_lock(&zr->resource_lock); - - if (fh->jpg_buffers.allocated || fh->v4l_buffers.allocated) { - dprintk(1, - KERN_ERR - "%s: VIDIOC_S_CROP - cannot change settings while active\n", - ZR_DEVNAME(zr)); - res = -EBUSY; - goto scrop_unlock_and_return; - } - - if (crop->type != V4L2_BUF_TYPE_VIDEO_OUTPUT && - (crop->type != V4L2_BUF_TYPE_VIDEO_CAPTURE || - fh->map_mode == ZORAN_MAP_MODE_RAW)) { - dprintk(1, - KERN_ERR - "%s: VIDIOC_G_CROP - subcapture only supported for compressed capture\n", - ZR_DEVNAME(zr)); - res = -EINVAL; - goto scrop_unlock_and_return; - } - - /* move into a form that we understand */ - settings.img_x = crop->c.left; - settings.img_y = crop->c.top; - settings.img_width = crop->c.width; - settings.img_height = crop->c.height; - - /* check validity */ - if ((res = zoran_check_jpg_settings(zr, &settings))) - goto scrop_unlock_and_return; - - /* accept */ - fh->jpg_settings = settings; - - scrop_unlock_and_return: - mutex_unlock(&zr->resource_lock); - return res; - } - break; - - case VIDIOC_G_JPEGCOMP: - { - struct v4l2_jpegcompression *params = arg; - - dprintk(3, KERN_DEBUG "%s: VIDIOC_G_JPEGCOMP\n", - ZR_DEVNAME(zr)); - - memset(params, 0, sizeof(*params)); - - mutex_lock(&zr->resource_lock); - - params->quality = fh->jpg_settings.jpg_comp.quality; - params->APPn = fh->jpg_settings.jpg_comp.APPn; - memcpy(params->APP_data, - fh->jpg_settings.jpg_comp.APP_data, - fh->jpg_settings.jpg_comp.APP_len); - params->APP_len = fh->jpg_settings.jpg_comp.APP_len; - memcpy(params->COM_data, - fh->jpg_settings.jpg_comp.COM_data, - fh->jpg_settings.jpg_comp.COM_len); - params->COM_len = fh->jpg_settings.jpg_comp.COM_len; - params->jpeg_markers = - fh->jpg_settings.jpg_comp.jpeg_markers; - - mutex_unlock(&zr->resource_lock); - - return 0; - } - break; - - case VIDIOC_S_JPEGCOMP: - { - struct v4l2_jpegcompression *params = arg; - int res = 0; - - settings = fh->jpg_settings; - - dprintk(3, - KERN_DEBUG - "%s: VIDIOC_S_JPEGCOMP - quality=%d, APPN=%d, APP_len=%d, COM_len=%d\n", - ZR_DEVNAME(zr), params->quality, params->APPn, - params->APP_len, params->COM_len); - - settings.jpg_comp = *params; - - mutex_lock(&zr->resource_lock); - - if (fh->v4l_buffers.active != ZORAN_FREE || - fh->jpg_buffers.active != ZORAN_FREE) { - dprintk(1, - KERN_WARNING - "%s: VIDIOC_S_JPEGCOMP called while in playback/capture mode\n", - ZR_DEVNAME(zr)); - res = -EBUSY; - goto sjpegc_unlock_and_return; - } - - if ((res = zoran_check_jpg_settings(zr, &settings))) - goto sjpegc_unlock_and_return; - if (!fh->jpg_buffers.allocated) - fh->jpg_buffers.buffer_size = - zoran_v4l2_calc_bufsize(&fh->jpg_settings); - fh->jpg_settings.jpg_comp = *params = settings.jpg_comp; - sjpegc_unlock_and_return: - mutex_unlock(&zr->resource_lock); - - return 0; - } - break; - - case VIDIOC_QUERYSTD: /* why is this useful? */ - { - v4l2_std_id *std = arg; - - dprintk(3, - KERN_DEBUG "%s: VIDIOC_QUERY_STD - std=0x%llx\n", - ZR_DEVNAME(zr), (unsigned long long)*std); - - if (*std == V4L2_STD_ALL || *std == V4L2_STD_NTSC || - *std == V4L2_STD_PAL || (*std == V4L2_STD_SECAM && - zr->card.norms == 3)) { - return 0; - } - - return -EINVAL; - } - break; - - case VIDIOC_TRY_FMT: - { - struct v4l2_format *fmt = arg; - int res = 0; - - dprintk(3, KERN_DEBUG "%s: VIDIOC_TRY_FMT - type=%d\n", - ZR_DEVNAME(zr), fmt->type); - - switch (fmt->type) { - case V4L2_BUF_TYPE_VIDEO_OVERLAY: - mutex_lock(&zr->resource_lock); - - if (fmt->fmt.win.w.width > BUZ_MAX_WIDTH) - fmt->fmt.win.w.width = BUZ_MAX_WIDTH; - if (fmt->fmt.win.w.width < BUZ_MIN_WIDTH) - fmt->fmt.win.w.width = BUZ_MIN_WIDTH; - if (fmt->fmt.win.w.height > BUZ_MAX_HEIGHT) - fmt->fmt.win.w.height = BUZ_MAX_HEIGHT; - if (fmt->fmt.win.w.height < BUZ_MIN_HEIGHT) - fmt->fmt.win.w.height = BUZ_MIN_HEIGHT; - - mutex_unlock(&zr->resource_lock); - break; - - case V4L2_BUF_TYPE_VIDEO_CAPTURE: - case V4L2_BUF_TYPE_VIDEO_OUTPUT: - if (fmt->fmt.pix.bytesperline > 0) - return -EINVAL; - - mutex_lock(&zr->resource_lock); - - if (fmt->fmt.pix.pixelformat == V4L2_PIX_FMT_MJPEG) { - settings = fh->jpg_settings; - - /* we actually need to set 'real' parameters now */ - if ((fmt->fmt.pix.height * 2) > - BUZ_MAX_HEIGHT) - settings.TmpDcm = 1; - else - settings.TmpDcm = 2; - settings.decimation = 0; - if (fmt->fmt.pix.height <= - fh->jpg_settings.img_height / 2) - settings.VerDcm = 2; - else - settings.VerDcm = 1; - if (fmt->fmt.pix.width <= - fh->jpg_settings.img_width / 4) - settings.HorDcm = 4; - else if (fmt->fmt.pix.width <= - fh->jpg_settings.img_width / 2) - settings.HorDcm = 2; - else - settings.HorDcm = 1; - if (settings.TmpDcm == 1) - settings.field_per_buff = 2; - else - settings.field_per_buff = 1; - - /* check */ - if ((res = - zoran_check_jpg_settings(zr, - &settings))) - goto tryfmt_unlock_and_return; - - /* tell the user what we actually did */ - fmt->fmt.pix.width = - settings.img_width / settings.HorDcm; - fmt->fmt.pix.height = - settings.img_height * 2 / - (settings.TmpDcm * settings.VerDcm); - if (settings.TmpDcm == 1) - fmt->fmt.pix.field = - (fh->jpg_settings. - odd_even ? V4L2_FIELD_SEQ_TB : - V4L2_FIELD_SEQ_BT); - else - fmt->fmt.pix.field = - (fh->jpg_settings. - odd_even ? V4L2_FIELD_TOP : - V4L2_FIELD_BOTTOM); - - fmt->fmt.pix.sizeimage = - zoran_v4l2_calc_bufsize(&settings); - } else if (fmt->type == - V4L2_BUF_TYPE_VIDEO_CAPTURE) { - int i; - - for (i = 0; i < NUM_FORMATS; i++) - if (zoran_formats[i].fourcc == - fmt->fmt.pix.pixelformat) - break; - if (i == NUM_FORMATS) { - res = -EINVAL; - goto tryfmt_unlock_and_return; - } - - if (fmt->fmt.pix.width > BUZ_MAX_WIDTH) - fmt->fmt.pix.width = BUZ_MAX_WIDTH; - if (fmt->fmt.pix.width < BUZ_MIN_WIDTH) - fmt->fmt.pix.width = BUZ_MIN_WIDTH; - if (fmt->fmt.pix.height > BUZ_MAX_HEIGHT) - fmt->fmt.pix.height = - BUZ_MAX_HEIGHT; - if (fmt->fmt.pix.height < BUZ_MIN_HEIGHT) - fmt->fmt.pix.height = - BUZ_MIN_HEIGHT; - } else { - res = -EINVAL; - goto tryfmt_unlock_and_return; - } - tryfmt_unlock_and_return: - mutex_unlock(&zr->resource_lock); - - return res; - break; - - default: - return -EINVAL; - } - - return 0; - } - break; - - default: - dprintk(1, KERN_DEBUG "%s: UNKNOWN ioctl cmd: 0x%x\n", - ZR_DEVNAME(zr), cmd); - return -ENOIOCTLCMD; - break; - - } - return 0; -} - - -static int -zoran_ioctl (struct inode *inode, - struct file *file, - unsigned int cmd, - unsigned long arg) -{ - return video_usercopy(inode, file, cmd, arg, zoran_do_ioctl); -} - -static unsigned int -zoran_poll (struct file *file, - poll_table *wait) -{ - struct zoran_fh *fh = file->private_data; - struct zoran *zr = fh->zr; - int res = 0, frame; - unsigned long flags; - - /* we should check whether buffers are ready to be synced on - * (w/o waits - O_NONBLOCK) here - * if ready for read (sync), return POLLIN|POLLRDNORM, - * if ready for write (sync), return POLLOUT|POLLWRNORM, - * if error, return POLLERR, - * if no buffers queued or so, return POLLNVAL - */ - - mutex_lock(&zr->resource_lock); - - switch (fh->map_mode) { - case ZORAN_MAP_MODE_RAW: - poll_wait(file, &zr->v4l_capq, wait); - frame = zr->v4l_pend[zr->v4l_sync_tail & V4L_MASK_FRAME]; - - spin_lock_irqsave(&zr->spinlock, flags); - dprintk(3, - KERN_DEBUG - "%s: %s() raw - active=%c, sync_tail=%lu/%c, pend_tail=%lu, pend_head=%lu\n", - ZR_DEVNAME(zr), __func__, - "FAL"[fh->v4l_buffers.active], zr->v4l_sync_tail, - "UPMD"[zr->v4l_buffers.buffer[frame].state], - zr->v4l_pend_tail, zr->v4l_pend_head); - /* Process is the one capturing? */ - if (fh->v4l_buffers.active != ZORAN_FREE && - /* Buffer ready to DQBUF? */ - zr->v4l_buffers.buffer[frame].state == BUZ_STATE_DONE) - res = POLLIN | POLLRDNORM; - spin_unlock_irqrestore(&zr->spinlock, flags); - - break; - - case ZORAN_MAP_MODE_JPG_REC: - case ZORAN_MAP_MODE_JPG_PLAY: - poll_wait(file, &zr->jpg_capq, wait); - frame = zr->jpg_pend[zr->jpg_que_tail & BUZ_MASK_FRAME]; - - spin_lock_irqsave(&zr->spinlock, flags); - dprintk(3, - KERN_DEBUG - "%s: %s() jpg - active=%c, que_tail=%lu/%c, que_head=%lu, dma=%lu/%lu\n", - ZR_DEVNAME(zr), __func__, - "FAL"[fh->jpg_buffers.active], zr->jpg_que_tail, - "UPMD"[zr->jpg_buffers.buffer[frame].state], - zr->jpg_que_head, zr->jpg_dma_tail, zr->jpg_dma_head); - if (fh->jpg_buffers.active != ZORAN_FREE && - zr->jpg_buffers.buffer[frame].state == BUZ_STATE_DONE) { - if (fh->map_mode == ZORAN_MAP_MODE_JPG_REC) - res = POLLIN | POLLRDNORM; - else - res = POLLOUT | POLLWRNORM; - } - spin_unlock_irqrestore(&zr->spinlock, flags); - - break; - - default: - dprintk(1, - KERN_ERR - "%s: zoran_poll() - internal error, unknown map_mode=%d\n", - ZR_DEVNAME(zr), fh->map_mode); - res = POLLNVAL; - } - - mutex_unlock(&zr->resource_lock); - - return res; -} - - -/* - * This maps the buffers to user space. - * - * Depending on the state of fh->map_mode - * the V4L or the MJPEG buffers are mapped - * per buffer or all together - * - * Note that we need to connect to some - * unmap signal event to unmap the de-allocate - * the buffer accordingly (zoran_vm_close()) - */ - -static void -zoran_vm_open (struct vm_area_struct *vma) -{ - struct zoran_mapping *map = vma->vm_private_data; - - map->count++; -} - -static void -zoran_vm_close (struct vm_area_struct *vma) -{ - struct zoran_mapping *map = vma->vm_private_data; - struct file *file = map->file; - struct zoran_fh *fh = file->private_data; - struct zoran *zr = fh->zr; - int i; - - map->count--; - if (map->count == 0) { - switch (fh->map_mode) { - case ZORAN_MAP_MODE_JPG_REC: - case ZORAN_MAP_MODE_JPG_PLAY: - - dprintk(3, KERN_INFO "%s: munmap(MJPEG)\n", - ZR_DEVNAME(zr)); - - for (i = 0; i < fh->jpg_buffers.num_buffers; i++) { - if (fh->jpg_buffers.buffer[i].map == map) { - fh->jpg_buffers.buffer[i].map = - NULL; - } - } - kfree(map); - - for (i = 0; i < fh->jpg_buffers.num_buffers; i++) - if (fh->jpg_buffers.buffer[i].map) - break; - if (i == fh->jpg_buffers.num_buffers) { - mutex_lock(&zr->resource_lock); - - if (fh->jpg_buffers.active != ZORAN_FREE) { - jpg_qbuf(file, -1, zr->codec_mode); - zr->jpg_buffers.allocated = 0; - zr->jpg_buffers.active = - fh->jpg_buffers.active = - ZORAN_FREE; - } - //jpg_fbuffer_free(file); - fh->jpg_buffers.allocated = 0; - fh->jpg_buffers.ready_to_be_freed = 1; - - mutex_unlock(&zr->resource_lock); - } - - break; - - case ZORAN_MAP_MODE_RAW: - - dprintk(3, KERN_INFO "%s: munmap(V4L)\n", - ZR_DEVNAME(zr)); - - for (i = 0; i < fh->v4l_buffers.num_buffers; i++) { - if (fh->v4l_buffers.buffer[i].map == map) { - /* unqueue/unmap */ - fh->v4l_buffers.buffer[i].map = - NULL; - } - } - kfree(map); - - for (i = 0; i < fh->v4l_buffers.num_buffers; i++) - if (fh->v4l_buffers.buffer[i].map) - break; - if (i == fh->v4l_buffers.num_buffers) { - mutex_lock(&zr->resource_lock); - - if (fh->v4l_buffers.active != ZORAN_FREE) { - unsigned long flags; - - spin_lock_irqsave(&zr->spinlock, flags); - zr36057_set_memgrab(zr, 0); - zr->v4l_buffers.allocated = 0; - zr->v4l_buffers.active = - fh->v4l_buffers.active = - ZORAN_FREE; - spin_unlock_irqrestore(&zr->spinlock, flags); - } - //v4l_fbuffer_free(file); - fh->v4l_buffers.allocated = 0; - fh->v4l_buffers.ready_to_be_freed = 1; - - mutex_unlock(&zr->resource_lock); - } - - break; - - default: - printk(KERN_ERR - "%s: munmap() - internal error - unknown map mode %d\n", - ZR_DEVNAME(zr), fh->map_mode); - break; - - } - } -} - -static struct vm_operations_struct zoran_vm_ops = { - .open = zoran_vm_open, - .close = zoran_vm_close, -}; - -static int -zoran_mmap (struct file *file, - struct vm_area_struct *vma) -{ - struct zoran_fh *fh = file->private_data; - struct zoran *zr = fh->zr; - unsigned long size = (vma->vm_end - vma->vm_start); - unsigned long offset = vma->vm_pgoff << PAGE_SHIFT; - int i, j; - unsigned long page, start = vma->vm_start, todo, pos, fraglen; - int first, last; - struct zoran_mapping *map; - int res = 0; - - dprintk(3, - KERN_INFO "%s: mmap(%s) of 0x%08lx-0x%08lx (size=%lu)\n", - ZR_DEVNAME(zr), - fh->map_mode == ZORAN_MAP_MODE_RAW ? "V4L" : "MJPEG", - vma->vm_start, vma->vm_end, size); - - if (!(vma->vm_flags & VM_SHARED) || !(vma->vm_flags & VM_READ) || - !(vma->vm_flags & VM_WRITE)) { - dprintk(1, - KERN_ERR - "%s: mmap() - no MAP_SHARED/PROT_{READ,WRITE} given\n", - ZR_DEVNAME(zr)); - return -EINVAL; - } - - switch (fh->map_mode) { - - case ZORAN_MAP_MODE_JPG_REC: - case ZORAN_MAP_MODE_JPG_PLAY: - - /* lock */ - mutex_lock(&zr->resource_lock); - - /* Map the MJPEG buffers */ - if (!fh->jpg_buffers.allocated) { - dprintk(1, - KERN_ERR - "%s: zoran_mmap(MJPEG) - buffers not yet allocated\n", - ZR_DEVNAME(zr)); - res = -ENOMEM; - goto jpg_mmap_unlock_and_return; - } - - first = offset / fh->jpg_buffers.buffer_size; - last = first - 1 + size / fh->jpg_buffers.buffer_size; - if (offset % fh->jpg_buffers.buffer_size != 0 || - size % fh->jpg_buffers.buffer_size != 0 || first < 0 || - last < 0 || first >= fh->jpg_buffers.num_buffers || - last >= fh->jpg_buffers.num_buffers) { - dprintk(1, - KERN_ERR - "%s: mmap(MJPEG) - offset=%lu or size=%lu invalid for bufsize=%d and numbufs=%d\n", - ZR_DEVNAME(zr), offset, size, - fh->jpg_buffers.buffer_size, - fh->jpg_buffers.num_buffers); - res = -EINVAL; - goto jpg_mmap_unlock_and_return; - } - for (i = first; i <= last; i++) { - if (fh->jpg_buffers.buffer[i].map) { - dprintk(1, - KERN_ERR - "%s: mmap(MJPEG) - buffer %d already mapped\n", - ZR_DEVNAME(zr), i); - res = -EBUSY; - goto jpg_mmap_unlock_and_return; - } - } - - /* map these buffers (v4l_buffers[i]) */ - map = kmalloc(sizeof(struct zoran_mapping), GFP_KERNEL); - if (!map) { - res = -ENOMEM; - goto jpg_mmap_unlock_and_return; - } - map->file = file; - map->count = 1; - - vma->vm_ops = &zoran_vm_ops; - vma->vm_flags |= VM_DONTEXPAND; - vma->vm_private_data = map; - - for (i = first; i <= last; i++) { - for (j = 0; - j < fh->jpg_buffers.buffer_size / PAGE_SIZE; - j++) { - fraglen = - (le32_to_cpu(fh->jpg_buffers.buffer[i]. - frag_tab[2 * j + 1]) & ~1) << 1; - todo = size; - if (todo > fraglen) - todo = fraglen; - pos = - le32_to_cpu(fh->jpg_buffers. - buffer[i].frag_tab[2 * j]); - /* should just be pos on i386 */ - page = virt_to_phys(bus_to_virt(pos)) - >> PAGE_SHIFT; - if (remap_pfn_range(vma, start, page, - todo, PAGE_SHARED)) { - dprintk(1, - KERN_ERR - "%s: zoran_mmap(V4L) - remap_pfn_range failed\n", - ZR_DEVNAME(zr)); - res = -EAGAIN; - goto jpg_mmap_unlock_and_return; - } - size -= todo; - start += todo; - if (size == 0) - break; - if (le32_to_cpu(fh->jpg_buffers.buffer[i]. - frag_tab[2 * j + 1]) & 1) - break; /* was last fragment */ - } - fh->jpg_buffers.buffer[i].map = map; - if (size == 0) - break; - - } - jpg_mmap_unlock_and_return: - mutex_unlock(&zr->resource_lock); - - break; - - case ZORAN_MAP_MODE_RAW: - - mutex_lock(&zr->resource_lock); - - /* Map the V4L buffers */ - if (!fh->v4l_buffers.allocated) { - dprintk(1, - KERN_ERR - "%s: zoran_mmap(V4L) - buffers not yet allocated\n", - ZR_DEVNAME(zr)); - res = -ENOMEM; - goto v4l_mmap_unlock_and_return; - } - - first = offset / fh->v4l_buffers.buffer_size; - last = first - 1 + size / fh->v4l_buffers.buffer_size; - if (offset % fh->v4l_buffers.buffer_size != 0 || - size % fh->v4l_buffers.buffer_size != 0 || first < 0 || - last < 0 || first >= fh->v4l_buffers.num_buffers || - last >= fh->v4l_buffers.buffer_size) { - dprintk(1, - KERN_ERR - "%s: mmap(V4L) - offset=%lu or size=%lu invalid for bufsize=%d and numbufs=%d\n", - ZR_DEVNAME(zr), offset, size, - fh->v4l_buffers.buffer_size, - fh->v4l_buffers.num_buffers); - res = -EINVAL; - goto v4l_mmap_unlock_and_return; - } - for (i = first; i <= last; i++) { - if (fh->v4l_buffers.buffer[i].map) { - dprintk(1, - KERN_ERR - "%s: mmap(V4L) - buffer %d already mapped\n", - ZR_DEVNAME(zr), i); - res = -EBUSY; - goto v4l_mmap_unlock_and_return; - } - } - - /* map these buffers (v4l_buffers[i]) */ - map = kmalloc(sizeof(struct zoran_mapping), GFP_KERNEL); - if (!map) { - res = -ENOMEM; - goto v4l_mmap_unlock_and_return; - } - map->file = file; - map->count = 1; - - vma->vm_ops = &zoran_vm_ops; - vma->vm_flags |= VM_DONTEXPAND; - vma->vm_private_data = map; - - for (i = first; i <= last; i++) { - todo = size; - if (todo > fh->v4l_buffers.buffer_size) - todo = fh->v4l_buffers.buffer_size; - page = fh->v4l_buffers.buffer[i].fbuffer_phys; - if (remap_pfn_range(vma, start, page >> PAGE_SHIFT, - todo, PAGE_SHARED)) { - dprintk(1, - KERN_ERR - "%s: zoran_mmap(V4L)i - remap_pfn_range failed\n", - ZR_DEVNAME(zr)); - res = -EAGAIN; - goto v4l_mmap_unlock_and_return; - } - size -= todo; - start += todo; - fh->v4l_buffers.buffer[i].map = map; - if (size == 0) - break; - } - v4l_mmap_unlock_and_return: - mutex_unlock(&zr->resource_lock); - - break; - - default: - dprintk(1, - KERN_ERR - "%s: zoran_mmap() - internal error - unknown map mode %d\n", - ZR_DEVNAME(zr), fh->map_mode); - break; - } - - return 0; -} - -static const struct file_operations zoran_fops = { - .owner = THIS_MODULE, - .open = zoran_open, - .release = zoran_close, - .ioctl = zoran_ioctl, -#ifdef CONFIG_COMPAT - .compat_ioctl = v4l_compat_ioctl32, -#endif - .llseek = no_llseek, - .read = zoran_read, - .write = zoran_write, - .mmap = zoran_mmap, - .poll = zoran_poll, -}; - -struct video_device zoran_template __devinitdata = { - .name = ZORAN_NAME, - .fops = &zoran_fops, - .release = &zoran_vdev_release, - .minor = -1 -}; - diff --git a/drivers/media/video/zoran_procfs.c b/drivers/media/video/zoran_procfs.c deleted file mode 100644 index 870bc5a..0000000 --- a/drivers/media/video/zoran_procfs.c +++ /dev/null @@ -1,225 +0,0 @@ -/* - * Zoran zr36057/zr36067 PCI controller driver, for the - * Pinnacle/Miro DC10/DC10+/DC30/DC30+, Iomega Buz, Linux - * Media Labs LML33/LML33R10. - * - * This part handles the procFS entries (/proc/ZORAN[%d]) - * - * Copyright (C) 2000 Serguei Miridonov - * - * Currently maintained by: - * Ronald Bultje - * Laurent Pinchart - * Mailinglist - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#include -#include -#include -#include - -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include - -#include "videocodec.h" -#include "zoran.h" -#include "zoran_procfs.h" -#include "zoran_card.h" - -#ifdef CONFIG_PROC_FS -struct procfs_params_zr36067 { - char *name; - short reg; - u32 mask; - short bit; -}; - -static const struct procfs_params_zr36067 zr67[] = { - {"HSPol", 0x000, 1, 30}, - {"HStart", 0x000, 0x3ff, 10}, - {"HEnd", 0x000, 0x3ff, 0}, - - {"VSPol", 0x004, 1, 30}, - {"VStart", 0x004, 0x3ff, 10}, - {"VEnd", 0x004, 0x3ff, 0}, - - {"ExtFl", 0x008, 1, 26}, - {"TopField", 0x008, 1, 25}, - {"VCLKPol", 0x008, 1, 24}, - {"DupFld", 0x008, 1, 20}, - {"LittleEndian", 0x008, 1, 0}, - - {"HsyncStart", 0x10c, 0xffff, 16}, - {"LineTot", 0x10c, 0xffff, 0}, - - {"NAX", 0x110, 0xffff, 16}, - {"PAX", 0x110, 0xffff, 0}, - - {"NAY", 0x114, 0xffff, 16}, - {"PAY", 0x114, 0xffff, 0}, - - /* {"",,,}, */ - - {NULL, 0, 0, 0}, -}; - -static void -setparam (struct zoran *zr, - char *name, - char *sval) -{ - int i = 0, reg0, reg, val; - - while (zr67[i].name != NULL) { - if (!strncmp(name, zr67[i].name, strlen(zr67[i].name))) { - reg = reg0 = btread(zr67[i].reg); - reg &= ~(zr67[i].mask << zr67[i].bit); - if (!isdigit(sval[0])) - break; - val = simple_strtoul(sval, NULL, 0); - if ((val & ~zr67[i].mask)) - break; - reg |= (val & zr67[i].mask) << zr67[i].bit; - dprintk(4, - KERN_INFO - "%s: setparam: setting ZR36067 register 0x%03x: 0x%08x=>0x%08x %s=%d\n", - ZR_DEVNAME(zr), zr67[i].reg, reg0, reg, - zr67[i].name, val); - btwrite(reg, zr67[i].reg); - break; - } - i++; - } -} - -static int zoran_show(struct seq_file *p, void *v) -{ - struct zoran *zr = p->private; - int i; - - seq_printf(p, "ZR36067 registers:\n"); - for (i = 0; i < 0x130; i += 16) - seq_printf(p, "%03X %08X %08X %08X %08X \n", i, - btread(i), btread(i+4), btread(i+8), btread(i+12)); - return 0; -} - -static int zoran_open(struct inode *inode, struct file *file) -{ - struct zoran *data = PDE(inode)->data; - return single_open(file, zoran_show, data); -} - -static ssize_t zoran_write(struct file *file, const char __user *buffer, - size_t count, loff_t *ppos) -{ - struct zoran *zr = PDE(file->f_path.dentry->d_inode)->data; - char *string, *sp; - char *line, *ldelim, *varname, *svar, *tdelim; - - if (count > 32768) /* Stupidity filter */ - return -EINVAL; - - string = sp = vmalloc(count + 1); - if (!string) { - dprintk(1, - KERN_ERR - "%s: write_proc: can not allocate memory\n", - ZR_DEVNAME(zr)); - return -ENOMEM; - } - if (copy_from_user(string, buffer, count)) { - vfree (string); - return -EFAULT; - } - string[count] = 0; - dprintk(4, KERN_INFO "%s: write_proc: name=%s count=%zu zr=%p\n", - ZR_DEVNAME(zr), file->f_path.dentry->d_name.name, count, zr); - ldelim = " \t\n"; - tdelim = "="; - line = strpbrk(sp, ldelim); - while (line) { - *line = 0; - svar = strpbrk(sp, tdelim); - if (svar) { - *svar = 0; - varname = sp; - svar++; - setparam(zr, varname, svar); - } - sp = line + 1; - line = strpbrk(sp, ldelim); - } - vfree(string); - - return count; -} - -static const struct file_operations zoran_operations = { - .owner = THIS_MODULE, - .open = zoran_open, - .read = seq_read, - .write = zoran_write, - .llseek = seq_lseek, - .release = single_release, -}; -#endif - -int -zoran_proc_init (struct zoran *zr) -{ -#ifdef CONFIG_PROC_FS - char name[8]; - - snprintf(name, 7, "zoran%d", zr->id); - zr->zoran_proc = proc_create_data(name, 0, NULL, &zoran_operations, zr); - if (zr->zoran_proc != NULL) { - dprintk(2, - KERN_INFO - "%s: procfs entry /proc/%s allocated. data=%p\n", - ZR_DEVNAME(zr), name, zr->zoran_proc->data); - } else { - dprintk(1, KERN_ERR "%s: Unable to initialise /proc/%s\n", - ZR_DEVNAME(zr), name); - return 1; - } -#endif - return 0; -} - -void -zoran_proc_cleanup (struct zoran *zr) -{ -#ifdef CONFIG_PROC_FS - char name[8]; - - snprintf(name, 7, "zoran%d", zr->id); - if (zr->zoran_proc) - remove_proc_entry(name, NULL); - zr->zoran_proc = NULL; -#endif -} diff --git a/drivers/media/video/zoran_procfs.h b/drivers/media/video/zoran_procfs.h deleted file mode 100644 index f2d5b1b..0000000 --- a/drivers/media/video/zoran_procfs.h +++ /dev/null @@ -1,36 +0,0 @@ -/* - * Zoran zr36057/zr36067 PCI controller driver, for the - * Pinnacle/Miro DC10/DC10+/DC30/DC30+, Iomega Buz, Linux - * Media Labs LML33/LML33R10. - * - * This part handles card-specific data and detection - * - * Copyright (C) 2000 Serguei Miridonov - * - * Currently maintained by: - * Ronald Bultje - * Laurent Pinchart - * Mailinglist - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#ifndef __ZORAN_PROCFS_H__ -#define __ZORAN_PROCFS_H__ - -extern int zoran_proc_init(struct zoran *zr); -extern void zoran_proc_cleanup(struct zoran *zr); - -#endif /* __ZORAN_PROCFS_H__ */ diff --git a/drivers/media/video/zr36016.c b/drivers/media/video/zr36016.c deleted file mode 100644 index 00d132b..0000000 --- a/drivers/media/video/zr36016.c +++ /dev/null @@ -1,529 +0,0 @@ -/* - * Zoran ZR36016 basic configuration functions - * - * Copyright (C) 2001 Wolfgang Scherr - * - * $Id: zr36016.c,v 1.1.2.14 2003/08/20 19:46:55 rbultje Exp $ - * - * ------------------------------------------------------------------------ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - * - * ------------------------------------------------------------------------ - */ - -#define ZR016_VERSION "v0.7" - -#include -#include -#include -#include - -#include -#include - -/* includes for structures and defines regarding video - #include */ - -/* I/O commands, error codes */ -#include -//#include - -/* v4l API */ -#include - -/* headerfile of this module */ -#include"zr36016.h" - -/* codec io API */ -#include"videocodec.h" - -/* it doesn't make sense to have more than 20 or so, - just to prevent some unwanted loops */ -#define MAX_CODECS 20 - -/* amount of chips attached via this driver */ -static int zr36016_codecs; - -/* debugging is available via module parameter */ -static int debug; -module_param(debug, int, 0); -MODULE_PARM_DESC(debug, "Debug level (0-4)"); - -#define dprintk(num, format, args...) \ - do { \ - if (debug >= num) \ - printk(format, ##args); \ - } while (0) - -/* ========================================================================= - Local hardware I/O functions: - - read/write via codec layer (registers are located in the master device) - ========================================================================= */ - -/* read and write functions */ -static u8 -zr36016_read (struct zr36016 *ptr, - u16 reg) -{ - u8 value = 0; - - // just in case something is wrong... - if (ptr->codec->master_data->readreg) - value = - (ptr->codec->master_data-> - readreg(ptr->codec, reg)) & 0xFF; - else - dprintk(1, - KERN_ERR "%s: invalid I/O setup, nothing read!\n", - ptr->name); - - dprintk(4, "%s: reading from 0x%04x: %02x\n", ptr->name, reg, - value); - - return value; -} - -static void -zr36016_write (struct zr36016 *ptr, - u16 reg, - u8 value) -{ - dprintk(4, "%s: writing 0x%02x to 0x%04x\n", ptr->name, value, - reg); - - // just in case something is wrong... - if (ptr->codec->master_data->writereg) { - ptr->codec->master_data->writereg(ptr->codec, reg, value); - } else - dprintk(1, - KERN_ERR - "%s: invalid I/O setup, nothing written!\n", - ptr->name); -} - -/* indirect read and write functions */ -/* the 016 supports auto-addr-increment, but - * writing it all time cost not much and is safer... */ -static u8 -zr36016_readi (struct zr36016 *ptr, - u16 reg) -{ - u8 value = 0; - - // just in case something is wrong... - if ((ptr->codec->master_data->writereg) && - (ptr->codec->master_data->readreg)) { - ptr->codec->master_data->writereg(ptr->codec, ZR016_IADDR, reg & 0x0F); // ADDR - value = (ptr->codec->master_data->readreg(ptr->codec, ZR016_IDATA)) & 0xFF; // DATA - } else - dprintk(1, - KERN_ERR - "%s: invalid I/O setup, nothing read (i)!\n", - ptr->name); - - dprintk(4, "%s: reading indirect from 0x%04x: %02x\n", ptr->name, - reg, value); - return value; -} - -static void -zr36016_writei (struct zr36016 *ptr, - u16 reg, - u8 value) -{ - dprintk(4, "%s: writing indirect 0x%02x to 0x%04x\n", ptr->name, - value, reg); - - // just in case something is wrong... - if (ptr->codec->master_data->writereg) { - ptr->codec->master_data->writereg(ptr->codec, ZR016_IADDR, reg & 0x0F); // ADDR - ptr->codec->master_data->writereg(ptr->codec, ZR016_IDATA, value & 0x0FF); // DATA - } else - dprintk(1, - KERN_ERR - "%s: invalid I/O setup, nothing written (i)!\n", - ptr->name); -} - -/* ========================================================================= - Local helper function: - - version read - ========================================================================= */ - -/* version kept in datastructure */ -static u8 -zr36016_read_version (struct zr36016 *ptr) -{ - ptr->version = zr36016_read(ptr, 0) >> 4; - return ptr->version; -} - -/* ========================================================================= - Local helper function: - - basic test of "connectivity", writes/reads to/from PAX-Lo register - ========================================================================= */ - -static int -zr36016_basic_test (struct zr36016 *ptr) -{ - if (debug) { - int i; - zr36016_writei(ptr, ZR016I_PAX_LO, 0x55); - dprintk(1, KERN_INFO "%s: registers: ", ptr->name); - for (i = 0; i <= 0x0b; i++) - dprintk(1, "%02x ", zr36016_readi(ptr, i)); - dprintk(1, "\n"); - } - // for testing just write 0, then the default value to a register and read - // it back in both cases - zr36016_writei(ptr, ZR016I_PAX_LO, 0x00); - if (zr36016_readi(ptr, ZR016I_PAX_LO) != 0x0) { - dprintk(1, - KERN_ERR - "%s: attach failed, can't connect to vfe processor!\n", - ptr->name); - return -ENXIO; - } - zr36016_writei(ptr, ZR016I_PAX_LO, 0x0d0); - if (zr36016_readi(ptr, ZR016I_PAX_LO) != 0x0d0) { - dprintk(1, - KERN_ERR - "%s: attach failed, can't connect to vfe processor!\n", - ptr->name); - return -ENXIO; - } - // we allow version numbers from 0-3, should be enough, though - zr36016_read_version(ptr); - if (ptr->version & 0x0c) { - dprintk(1, - KERN_ERR - "%s: attach failed, suspicious version %d found...\n", - ptr->name, ptr->version); - return -ENXIO; - } - - return 0; /* looks good! */ -} - -/* ========================================================================= - Local helper function: - - simple loop for pushing the init datasets - NO USE -- - ========================================================================= */ - -#if 0 -static int zr36016_pushit (struct zr36016 *ptr, - u16 startreg, - u16 len, - const char *data) -{ - int i=0; - - dprintk(4, "%s: write data block to 0x%04x (len=%d)\n", - ptr->name, startreg,len); - while (imode == CODEC_DO_COMPRESSION ? - ZR016_COMPRESSION : ZR016_EXPANSION)); - - // misc setup - zr36016_writei(ptr, ZR016I_SETUP1, - (ptr->xdec ? (ZR016_HRFL | ZR016_HORZ) : 0) | - (ptr->ydec ? ZR016_VERT : 0) | ZR016_CNTI); - zr36016_writei(ptr, ZR016I_SETUP2, ZR016_CCIR); - - // Window setup - // (no extra offset for now, norm defines offset, default width height) - zr36016_writei(ptr, ZR016I_PAX_HI, ptr->width >> 8); - zr36016_writei(ptr, ZR016I_PAX_LO, ptr->width & 0xFF); - zr36016_writei(ptr, ZR016I_PAY_HI, ptr->height >> 8); - zr36016_writei(ptr, ZR016I_PAY_LO, ptr->height & 0xFF); - zr36016_writei(ptr, ZR016I_NAX_HI, ptr->xoff >> 8); - zr36016_writei(ptr, ZR016I_NAX_LO, ptr->xoff & 0xFF); - zr36016_writei(ptr, ZR016I_NAY_HI, ptr->yoff >> 8); - zr36016_writei(ptr, ZR016I_NAY_LO, ptr->yoff & 0xFF); - - /* shall we continue now, please? */ - zr36016_write(ptr, ZR016_GOSTOP, 1); -} - -/* ========================================================================= - CODEC API FUNCTIONS - - this functions are accessed by the master via the API structure - ========================================================================= */ - -/* set compression/expansion mode and launches codec - - this should be the last call from the master before starting processing */ -static int -zr36016_set_mode (struct videocodec *codec, - int mode) -{ - struct zr36016 *ptr = (struct zr36016 *) codec->data; - - dprintk(2, "%s: set_mode %d call\n", ptr->name, mode); - - if ((mode != CODEC_DO_EXPANSION) && (mode != CODEC_DO_COMPRESSION)) - return -EINVAL; - - ptr->mode = mode; - zr36016_init(ptr); - - return 0; -} - -/* set picture size */ -static int -zr36016_set_video (struct videocodec *codec, - struct tvnorm *norm, - struct vfe_settings *cap, - struct vfe_polarity *pol) -{ - struct zr36016 *ptr = (struct zr36016 *) codec->data; - - dprintk(2, "%s: set_video %d.%d, %d/%d-%dx%d (0x%x) call\n", - ptr->name, norm->HStart, norm->VStart, - cap->x, cap->y, cap->width, cap->height, - cap->decimation); - - /* if () return -EINVAL; - * trust the master driver that it knows what it does - so - * we allow invalid startx/y for now ... */ - ptr->width = cap->width; - ptr->height = cap->height; - /* (Ronald) This is ugly. zoran_device.c, line 387 - * already mentions what happens if HStart is even - * (blue faces, etc., cr/cb inversed). There's probably - * some good reason why HStart is 0 instead of 1, so I'm - * leaving it to this for now, but really... This can be - * done a lot simpler */ - ptr->xoff = (norm->HStart ? norm->HStart : 1) + cap->x; - /* Something to note here (I don't understand it), setting - * VStart too high will cause the codec to 'not work'. I - * really don't get it. values of 16 (VStart) already break - * it here. Just '0' seems to work. More testing needed! */ - ptr->yoff = norm->VStart + cap->y; - /* (Ronald) dzjeeh, can't this thing do hor_decimation = 4? */ - ptr->xdec = ((cap->decimation & 0xff) == 1) ? 0 : 1; - ptr->ydec = (((cap->decimation >> 8) & 0xff) == 1) ? 0 : 1; - - return 0; -} - -/* additional control functions */ -static int -zr36016_control (struct videocodec *codec, - int type, - int size, - void *data) -{ - struct zr36016 *ptr = (struct zr36016 *) codec->data; - int *ival = (int *) data; - - dprintk(2, "%s: control %d call with %d byte\n", ptr->name, type, - size); - - switch (type) { - case CODEC_G_STATUS: /* get last status - we don't know it ... */ - if (size != sizeof(int)) - return -EFAULT; - *ival = 0; - break; - - case CODEC_G_CODEC_MODE: - if (size != sizeof(int)) - return -EFAULT; - *ival = 0; - break; - - case CODEC_S_CODEC_MODE: - if (size != sizeof(int)) - return -EFAULT; - if (*ival != 0) - return -EINVAL; - /* not needed, do nothing */ - return 0; - - case CODEC_G_VFE: - case CODEC_S_VFE: - return 0; - - case CODEC_S_MMAP: - /* not available, give an error */ - return -ENXIO; - - default: - return -EINVAL; - } - - return size; -} - -/* ========================================================================= - Exit and unregister function: - - Deinitializes Zoran's JPEG processor - ========================================================================= */ - -static int -zr36016_unset (struct videocodec *codec) -{ - struct zr36016 *ptr = codec->data; - - if (ptr) { - /* do wee need some codec deinit here, too ???? */ - - dprintk(1, "%s: finished codec #%d\n", ptr->name, - ptr->num); - kfree(ptr); - codec->data = NULL; - - zr36016_codecs--; - return 0; - } - - return -EFAULT; -} - -/* ========================================================================= - Setup and registry function: - - Initializes Zoran's JPEG processor - - Also sets pixel size, average code size, mode (compr./decompr.) - (the given size is determined by the processor with the video interface) - ========================================================================= */ - -static int -zr36016_setup (struct videocodec *codec) -{ - struct zr36016 *ptr; - int res; - - dprintk(2, "zr36016: initializing VFE subsystem #%d.\n", - zr36016_codecs); - - if (zr36016_codecs == MAX_CODECS) { - dprintk(1, - KERN_ERR "zr36016: Can't attach more codecs!\n"); - return -ENOSPC; - } - //mem structure init - codec->data = ptr = kzalloc(sizeof(struct zr36016), GFP_KERNEL); - if (NULL == ptr) { - dprintk(1, KERN_ERR "zr36016: Can't get enough memory!\n"); - return -ENOMEM; - } - - snprintf(ptr->name, sizeof(ptr->name), "zr36016[%d]", - zr36016_codecs); - ptr->num = zr36016_codecs++; - ptr->codec = codec; - - //testing - res = zr36016_basic_test(ptr); - if (res < 0) { - zr36016_unset(codec); - return res; - } - //final setup - ptr->mode = CODEC_DO_COMPRESSION; - ptr->width = 768; - ptr->height = 288; - ptr->xdec = 1; - ptr->ydec = 0; - zr36016_init(ptr); - - dprintk(1, KERN_INFO "%s: codec v%d attached and running\n", - ptr->name, ptr->version); - - return 0; -} - -static const struct videocodec zr36016_codec = { - .owner = THIS_MODULE, - .name = "zr36016", - .magic = 0L, // magic not used - .flags = - CODEC_FLAG_HARDWARE | CODEC_FLAG_VFE | CODEC_FLAG_ENCODER | - CODEC_FLAG_DECODER, - .type = CODEC_TYPE_ZR36016, - .setup = zr36016_setup, // functionality - .unset = zr36016_unset, - .set_mode = zr36016_set_mode, - .set_video = zr36016_set_video, - .control = zr36016_control, - // others are not used -}; - -/* ========================================================================= - HOOK IN DRIVER AS KERNEL MODULE - ========================================================================= */ - -static int __init -zr36016_init_module (void) -{ - //dprintk(1, "ZR36016 driver %s\n",ZR016_VERSION); - zr36016_codecs = 0; - return videocodec_register(&zr36016_codec); -} - -static void __exit -zr36016_cleanup_module (void) -{ - if (zr36016_codecs) { - dprintk(1, - "zr36016: something's wrong - %d codecs left somehow.\n", - zr36016_codecs); - } - videocodec_unregister(&zr36016_codec); -} - -module_init(zr36016_init_module); -module_exit(zr36016_cleanup_module); - -MODULE_AUTHOR("Wolfgang Scherr "); -MODULE_DESCRIPTION("Driver module for ZR36016 video frontends " - ZR016_VERSION); -MODULE_LICENSE("GPL"); diff --git a/drivers/media/video/zr36016.h b/drivers/media/video/zr36016.h deleted file mode 100644 index 8c79229..0000000 --- a/drivers/media/video/zr36016.h +++ /dev/null @@ -1,111 +0,0 @@ -/* - * Zoran ZR36016 basic configuration functions - header file - * - * Copyright (C) 2001 Wolfgang Scherr - * - * $Id: zr36016.h,v 1.1.2.3 2003/01/14 21:18:07 rbultje Exp $ - * - * ------------------------------------------------------------------------ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - * - * ------------------------------------------------------------------------ - */ - -#ifndef ZR36016_H -#define ZR36016_H - -/* data stored for each zoran jpeg codec chip */ -struct zr36016 { - char name[32]; - int num; - /* io datastructure */ - struct videocodec *codec; - // coder status - __u8 version; - // actual coder setup - int mode; - - __u16 xoff; - __u16 yoff; - __u16 width; - __u16 height; - __u16 xdec; - __u16 ydec; -}; - -/* direct register addresses */ -#define ZR016_GOSTOP 0x00 -#define ZR016_MODE 0x01 -#define ZR016_IADDR 0x02 -#define ZR016_IDATA 0x03 - -/* indirect register addresses */ -#define ZR016I_SETUP1 0x00 -#define ZR016I_SETUP2 0x01 -#define ZR016I_NAX_LO 0x02 -#define ZR016I_NAX_HI 0x03 -#define ZR016I_PAX_LO 0x04 -#define ZR016I_PAX_HI 0x05 -#define ZR016I_NAY_LO 0x06 -#define ZR016I_NAY_HI 0x07 -#define ZR016I_PAY_LO 0x08 -#define ZR016I_PAY_HI 0x09 -#define ZR016I_NOL_LO 0x0a -#define ZR016I_NOL_HI 0x0b - -/* possible values for mode register */ -#define ZR016_RGB444_YUV444 0x00 -#define ZR016_RGB444_YUV422 0x01 -#define ZR016_RGB444_YUV411 0x02 -#define ZR016_RGB444_Y400 0x03 -#define ZR016_RGB444_RGB444 0x04 -#define ZR016_YUV444_YUV444 0x08 -#define ZR016_YUV444_YUV422 0x09 -#define ZR016_YUV444_YUV411 0x0a -#define ZR016_YUV444_Y400 0x0b -#define ZR016_YUV444_RGB444 0x0c -#define ZR016_YUV422_YUV422 0x11 -#define ZR016_YUV422_YUV411 0x12 -#define ZR016_YUV422_Y400 0x13 -#define ZR016_YUV411_YUV411 0x16 -#define ZR016_YUV411_Y400 0x17 -#define ZR016_4444_4444 0x19 -#define ZR016_100_100 0x1b - -#define ZR016_RGB444 0x00 -#define ZR016_YUV444 0x20 -#define ZR016_YUV422 0x40 - -#define ZR016_COMPRESSION 0x80 -#define ZR016_EXPANSION 0x80 - -/* possible values for setup 1 register */ -#define ZR016_CKRT 0x80 -#define ZR016_VERT 0x40 -#define ZR016_HORZ 0x20 -#define ZR016_HRFL 0x10 -#define ZR016_DSFL 0x08 -#define ZR016_SBFL 0x04 -#define ZR016_RSTR 0x02 -#define ZR016_CNTI 0x01 - -/* possible values for setup 2 register */ -#define ZR016_SYEN 0x40 -#define ZR016_CCIR 0x04 -#define ZR016_SIGN 0x02 -#define ZR016_YMCS 0x01 - -#endif /*fndef ZR36016_H */ diff --git a/drivers/media/video/zr36050.c b/drivers/media/video/zr36050.c deleted file mode 100644 index cf8b271..0000000 --- a/drivers/media/video/zr36050.c +++ /dev/null @@ -1,904 +0,0 @@ -/* - * Zoran ZR36050 basic configuration functions - * - * Copyright (C) 2001 Wolfgang Scherr - * - * $Id: zr36050.c,v 1.1.2.11 2003/08/03 14:54:53 rbultje Exp $ - * - * ------------------------------------------------------------------------ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - * - * ------------------------------------------------------------------------ - */ - -#define ZR050_VERSION "v0.7.1" - -#include -#include -#include -#include - -#include -#include - -/* includes for structures and defines regarding video - #include */ - -/* I/O commands, error codes */ -#include -//#include - -/* headerfile of this module */ -#include "zr36050.h" - -/* codec io API */ -#include "videocodec.h" - -/* it doesn't make sense to have more than 20 or so, - just to prevent some unwanted loops */ -#define MAX_CODECS 20 - -/* amount of chips attached via this driver */ -static int zr36050_codecs; - -/* debugging is available via module parameter */ -static int debug; -module_param(debug, int, 0); -MODULE_PARM_DESC(debug, "Debug level (0-4)"); - -#define dprintk(num, format, args...) \ - do { \ - if (debug >= num) \ - printk(format, ##args); \ - } while (0) - -/* ========================================================================= - Local hardware I/O functions: - - read/write via codec layer (registers are located in the master device) - ========================================================================= */ - -/* read and write functions */ -static u8 -zr36050_read (struct zr36050 *ptr, - u16 reg) -{ - u8 value = 0; - - // just in case something is wrong... - if (ptr->codec->master_data->readreg) - value = (ptr->codec->master_data->readreg(ptr->codec, - reg)) & 0xFF; - else - dprintk(1, - KERN_ERR "%s: invalid I/O setup, nothing read!\n", - ptr->name); - - dprintk(4, "%s: reading from 0x%04x: %02x\n", ptr->name, reg, - value); - - return value; -} - -static void -zr36050_write (struct zr36050 *ptr, - u16 reg, - u8 value) -{ - dprintk(4, "%s: writing 0x%02x to 0x%04x\n", ptr->name, value, - reg); - - // just in case something is wrong... - if (ptr->codec->master_data->writereg) - ptr->codec->master_data->writereg(ptr->codec, reg, value); - else - dprintk(1, - KERN_ERR - "%s: invalid I/O setup, nothing written!\n", - ptr->name); -} - -/* ========================================================================= - Local helper function: - - status read - ========================================================================= */ - -/* status is kept in datastructure */ -static u8 -zr36050_read_status1 (struct zr36050 *ptr) -{ - ptr->status1 = zr36050_read(ptr, ZR050_STATUS_1); - - zr36050_read(ptr, 0); - return ptr->status1; -} - -/* ========================================================================= - Local helper function: - - scale factor read - ========================================================================= */ - -/* scale factor is kept in datastructure */ -static u16 -zr36050_read_scalefactor (struct zr36050 *ptr) -{ - ptr->scalefact = (zr36050_read(ptr, ZR050_SF_HI) << 8) | - (zr36050_read(ptr, ZR050_SF_LO) & 0xFF); - - /* leave 0 selected for an eventually GO from master */ - zr36050_read(ptr, 0); - return ptr->scalefact; -} - -/* ========================================================================= - Local helper function: - - wait if codec is ready to proceed (end of processing) or time is over - ========================================================================= */ - -static void -zr36050_wait_end (struct zr36050 *ptr) -{ - int i = 0; - - while (!(zr36050_read_status1(ptr) & 0x4)) { - udelay(1); - if (i++ > 200000) { // 200ms, there is for sure something wrong!!! - dprintk(1, - "%s: timeout at wait_end (last status: 0x%02x)\n", - ptr->name, ptr->status1); - break; - } - } -} - -/* ========================================================================= - Local helper function: - - basic test of "connectivity", writes/reads to/from memory the SOF marker - ========================================================================= */ - -static int -zr36050_basic_test (struct zr36050 *ptr) -{ - zr36050_write(ptr, ZR050_SOF_IDX, 0x00); - zr36050_write(ptr, ZR050_SOF_IDX + 1, 0x00); - if ((zr36050_read(ptr, ZR050_SOF_IDX) | - zr36050_read(ptr, ZR050_SOF_IDX + 1)) != 0x0000) { - dprintk(1, - KERN_ERR - "%s: attach failed, can't connect to jpeg processor!\n", - ptr->name); - return -ENXIO; - } - zr36050_write(ptr, ZR050_SOF_IDX, 0xff); - zr36050_write(ptr, ZR050_SOF_IDX + 1, 0xc0); - if (((zr36050_read(ptr, ZR050_SOF_IDX) << 8) | - zr36050_read(ptr, ZR050_SOF_IDX + 1)) != 0xffc0) { - dprintk(1, - KERN_ERR - "%s: attach failed, can't connect to jpeg processor!\n", - ptr->name); - return -ENXIO; - } - - zr36050_wait_end(ptr); - if ((ptr->status1 & 0x4) == 0) { - dprintk(1, - KERN_ERR - "%s: attach failed, jpeg processor failed (end flag)!\n", - ptr->name); - return -EBUSY; - } - - return 0; /* looks good! */ -} - -/* ========================================================================= - Local helper function: - - simple loop for pushing the init datasets - ========================================================================= */ - -static int -zr36050_pushit (struct zr36050 *ptr, - u16 startreg, - u16 len, - const char *data) -{ - int i = 0; - - dprintk(4, "%s: write data block to 0x%04x (len=%d)\n", ptr->name, - startreg, len); - while (i < len) { - zr36050_write(ptr, startreg++, data[i++]); - } - - return i; -} - -/* ========================================================================= - Basic datasets: - - jpeg baseline setup data (you find it on lots places in internet, or just - extract it from any regular .jpg image...) - - Could be variable, but until it's not needed it they are just fixed to save - memory. Otherwise expand zr36050 structure with arrays, push the values to - it and initalize from there, as e.g. the linux zr36057/60 driver does it. - ========================================================================= */ - -static const char zr36050_dqt[0x86] = { - 0xff, 0xdb, //Marker: DQT - 0x00, 0x84, //Length: 2*65+2 - 0x00, //Pq,Tq first table - 0x10, 0x0b, 0x0c, 0x0e, 0x0c, 0x0a, 0x10, 0x0e, - 0x0d, 0x0e, 0x12, 0x11, 0x10, 0x13, 0x18, 0x28, - 0x1a, 0x18, 0x16, 0x16, 0x18, 0x31, 0x23, 0x25, - 0x1d, 0x28, 0x3a, 0x33, 0x3d, 0x3c, 0x39, 0x33, - 0x38, 0x37, 0x40, 0x48, 0x5c, 0x4e, 0x40, 0x44, - 0x57, 0x45, 0x37, 0x38, 0x50, 0x6d, 0x51, 0x57, - 0x5f, 0x62, 0x67, 0x68, 0x67, 0x3e, 0x4d, 0x71, - 0x79, 0x70, 0x64, 0x78, 0x5c, 0x65, 0x67, 0x63, - 0x01, //Pq,Tq second table - 0x11, 0x12, 0x12, 0x18, 0x15, 0x18, 0x2f, 0x1a, - 0x1a, 0x2f, 0x63, 0x42, 0x38, 0x42, 0x63, 0x63, - 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, - 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, - 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, - 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, - 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, - 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63 -}; - -static const char zr36050_dht[0x1a4] = { - 0xff, 0xc4, //Marker: DHT - 0x01, 0xa2, //Length: 2*AC, 2*DC - 0x00, //DC first table - 0x00, 0x01, 0x05, 0x01, 0x01, 0x01, 0x01, 0x01, - 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, - 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, 0x08, 0x09, 0x0A, 0x0B, - 0x01, //DC second table - 0x00, 0x03, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, - 0x01, 0x01, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, - 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, 0x08, 0x09, 0x0A, 0x0B, - 0x10, //AC first table - 0x00, 0x02, 0x01, 0x03, 0x03, 0x02, 0x04, 0x03, - 0x05, 0x05, 0x04, 0x04, 0x00, 0x00, - 0x01, 0x7D, 0x01, 0x02, 0x03, 0x00, 0x04, 0x11, - 0x05, 0x12, 0x21, 0x31, 0x41, 0x06, 0x13, 0x51, 0x61, - 0x07, 0x22, 0x71, 0x14, 0x32, 0x81, 0x91, 0xA1, - 0x08, 0x23, 0x42, 0xB1, 0xC1, 0x15, 0x52, 0xD1, 0xF0, 0x24, - 0x33, 0x62, 0x72, 0x82, 0x09, 0x0A, 0x16, 0x17, - 0x18, 0x19, 0x1A, 0x25, 0x26, 0x27, 0x28, 0x29, 0x2A, 0x34, - 0x35, 0x36, 0x37, 0x38, 0x39, 0x3A, 0x43, 0x44, - 0x45, 0x46, 0x47, 0x48, 0x49, 0x4A, 0x53, 0x54, 0x55, 0x56, - 0x57, 0x58, 0x59, 0x5A, 0x63, 0x64, 0x65, 0x66, - 0x67, 0x68, 0x69, 0x6A, 0x73, 0x74, 0x75, 0x76, 0x77, 0x78, - 0x79, 0x7A, 0x83, 0x84, 0x85, 0x86, 0x87, 0x88, - 0x89, 0x8A, 0x92, 0x93, 0x94, 0x95, 0x96, 0x97, 0x98, 0x99, - 0x9A, 0xA2, 0xA3, 0xA4, 0xA5, 0xA6, 0xA7, 0xA8, - 0xA9, 0xAA, 0xB2, 0xB3, 0xB4, 0xB5, 0xB6, 0xB7, 0xB8, 0xB9, - 0xBA, 0xC2, 0xC3, 0xC4, 0xC5, 0xC6, 0xC7, 0xC8, - 0xC9, 0xCA, 0xD2, 0xD3, 0xD4, 0xD5, 0xD6, 0xD7, 0xD8, 0xD9, - 0xDA, 0xE1, 0xE2, 0xE3, 0xE4, 0xE5, 0xE6, 0xE7, - 0xE8, 0xE9, 0xEA, 0xF1, 0xF2, 0xF3, 0xF4, 0xF5, 0xF6, 0xF7, - 0xF8, 0xF9, 0xFA, - 0x11, //AC second table - 0x00, 0x02, 0x01, 0x02, 0x04, 0x04, 0x03, 0x04, - 0x07, 0x05, 0x04, 0x04, 0x00, 0x01, - 0x02, 0x77, 0x00, 0x01, 0x02, 0x03, 0x11, 0x04, - 0x05, 0x21, 0x31, 0x06, 0x12, 0x41, 0x51, 0x07, 0x61, 0x71, - 0x13, 0x22, 0x32, 0x81, 0x08, 0x14, 0x42, 0x91, - 0xA1, 0xB1, 0xC1, 0x09, 0x23, 0x33, 0x52, 0xF0, 0x15, 0x62, - 0x72, 0xD1, 0x0A, 0x16, 0x24, 0x34, 0xE1, 0x25, - 0xF1, 0x17, 0x18, 0x19, 0x1A, 0x26, 0x27, 0x28, 0x29, 0x2A, - 0x35, 0x36, 0x37, 0x38, 0x39, 0x3A, 0x43, 0x44, - 0x45, 0x46, 0x47, 0x48, 0x49, 0x4A, 0x53, 0x54, 0x55, 0x56, - 0x57, 0x58, 0x59, 0x5A, 0x63, 0x64, 0x65, 0x66, - 0x67, 0x68, 0x69, 0x6A, 0x73, 0x74, 0x75, 0x76, 0x77, 0x78, - 0x79, 0x7A, 0x82, 0x83, 0x84, 0x85, 0x86, 0x87, - 0x88, 0x89, 0x8A, 0x92, 0x93, 0x94, 0x95, 0x96, 0x97, 0x98, - 0x99, 0x9A, 0xA2, 0xA3, 0xA4, 0xA5, 0xA6, 0xA7, - 0xA8, 0xA9, 0xAA, 0xB2, 0xB3, 0xB4, 0xB5, 0xB6, 0xB7, 0xB8, - 0xB9, 0xBA, 0xC2, 0xC3, 0xC4, 0xC5, 0xC6, 0xC7, - 0xC8, 0xC9, 0xCA, 0xD2, 0xD3, 0xD4, 0xD5, 0xD6, 0xD7, 0xD8, - 0xD9, 0xDA, 0xE2, 0xE3, 0xE4, 0xE5, 0xE6, 0xE7, - 0xE8, 0xE9, 0xEA, 0xF2, 0xF3, 0xF4, 0xF5, 0xF6, 0xF7, 0xF8, - 0xF9, 0xFA -}; - -/* jpeg baseline setup, this is just fixed in this driver (YUV pictures) */ -#define NO_OF_COMPONENTS 0x3 //Y,U,V -#define BASELINE_PRECISION 0x8 //MCU size (?) -static const char zr36050_tq[8] = { 0, 1, 1, 0, 0, 0, 0, 0 }; //table idx's QT -static const char zr36050_td[8] = { 0, 1, 1, 0, 0, 0, 0, 0 }; //table idx's DC -static const char zr36050_ta[8] = { 0, 1, 1, 0, 0, 0, 0, 0 }; //table idx's AC - -/* horizontal 422 decimation setup (maybe we support 411 or so later, too) */ -static const char zr36050_decimation_h[8] = { 2, 1, 1, 0, 0, 0, 0, 0 }; -static const char zr36050_decimation_v[8] = { 1, 1, 1, 0, 0, 0, 0, 0 }; - -/* ========================================================================= - Local helper functions: - - calculation and setup of parameter-dependent JPEG baseline segments - (needed for compression only) - ========================================================================= */ - -/* ------------------------------------------------------------------------- */ - -/* SOF (start of frame) segment depends on width, height and sampling ratio - of each color component */ - -static int -zr36050_set_sof (struct zr36050 *ptr) -{ - char sof_data[34]; // max. size of register set - int i; - - dprintk(3, "%s: write SOF (%dx%d, %d components)\n", ptr->name, - ptr->width, ptr->height, NO_OF_COMPONENTS); - sof_data[0] = 0xff; - sof_data[1] = 0xc0; - sof_data[2] = 0x00; - sof_data[3] = (3 * NO_OF_COMPONENTS) + 8; - sof_data[4] = BASELINE_PRECISION; // only '8' possible with zr36050 - sof_data[5] = (ptr->height) >> 8; - sof_data[6] = (ptr->height) & 0xff; - sof_data[7] = (ptr->width) >> 8; - sof_data[8] = (ptr->width) & 0xff; - sof_data[9] = NO_OF_COMPONENTS; - for (i = 0; i < NO_OF_COMPONENTS; i++) { - sof_data[10 + (i * 3)] = i; // index identifier - sof_data[11 + (i * 3)] = (ptr->h_samp_ratio[i] << 4) | (ptr->v_samp_ratio[i]); // sampling ratios - sof_data[12 + (i * 3)] = zr36050_tq[i]; // Q table selection - } - return zr36050_pushit(ptr, ZR050_SOF_IDX, - (3 * NO_OF_COMPONENTS) + 10, sof_data); -} - -/* ------------------------------------------------------------------------- */ - -/* SOS (start of scan) segment depends on the used scan components - of each color component */ - -static int -zr36050_set_sos (struct zr36050 *ptr) -{ - char sos_data[16]; // max. size of register set - int i; - - dprintk(3, "%s: write SOS\n", ptr->name); - sos_data[0] = 0xff; - sos_data[1] = 0xda; - sos_data[2] = 0x00; - sos_data[3] = 2 + 1 + (2 * NO_OF_COMPONENTS) + 3; - sos_data[4] = NO_OF_COMPONENTS; - for (i = 0; i < NO_OF_COMPONENTS; i++) { - sos_data[5 + (i * 2)] = i; // index - sos_data[6 + (i * 2)] = (zr36050_td[i] << 4) | zr36050_ta[i]; // AC/DC tbl.sel. - } - sos_data[2 + 1 + (2 * NO_OF_COMPONENTS) + 2] = 00; // scan start - sos_data[2 + 1 + (2 * NO_OF_COMPONENTS) + 3] = 0x3F; - sos_data[2 + 1 + (2 * NO_OF_COMPONENTS) + 4] = 00; - return zr36050_pushit(ptr, ZR050_SOS1_IDX, - 4 + 1 + (2 * NO_OF_COMPONENTS) + 3, - sos_data); -} - -/* ------------------------------------------------------------------------- */ - -/* DRI (define restart interval) */ - -static int -zr36050_set_dri (struct zr36050 *ptr) -{ - char dri_data[6]; // max. size of register set - - dprintk(3, "%s: write DRI\n", ptr->name); - dri_data[0] = 0xff; - dri_data[1] = 0xdd; - dri_data[2] = 0x00; - dri_data[3] = 0x04; - dri_data[4] = ptr->dri >> 8; - dri_data[5] = ptr->dri & 0xff; - return zr36050_pushit(ptr, ZR050_DRI_IDX, 6, dri_data); -} - -/* ========================================================================= - Setup function: - - Setup compression/decompression of Zoran's JPEG processor - ( see also zoran 36050 manual ) - - ... sorry for the spaghetti code ... - ========================================================================= */ -static void -zr36050_init (struct zr36050 *ptr) -{ - int sum = 0; - long bitcnt, tmp; - - if (ptr->mode == CODEC_DO_COMPRESSION) { - dprintk(2, "%s: COMPRESSION SETUP\n", ptr->name); - - /* 050 communicates with 057 in master mode */ - zr36050_write(ptr, ZR050_HARDWARE, ZR050_HW_MSTR); - - /* encoding table preload for compression */ - zr36050_write(ptr, ZR050_MODE, - ZR050_MO_COMP | ZR050_MO_TLM); - zr36050_write(ptr, ZR050_OPTIONS, 0); - - /* disable all IRQs */ - zr36050_write(ptr, ZR050_INT_REQ_0, 0); - zr36050_write(ptr, ZR050_INT_REQ_1, 3); // low 2 bits always 1 - - /* volume control settings */ - /*zr36050_write(ptr, ZR050_MBCV, ptr->max_block_vol);*/ - zr36050_write(ptr, ZR050_SF_HI, ptr->scalefact >> 8); - zr36050_write(ptr, ZR050_SF_LO, ptr->scalefact & 0xff); - - zr36050_write(ptr, ZR050_AF_HI, 0xff); - zr36050_write(ptr, ZR050_AF_M, 0xff); - zr36050_write(ptr, ZR050_AF_LO, 0xff); - - /* setup the variable jpeg tables */ - sum += zr36050_set_sof(ptr); - sum += zr36050_set_sos(ptr); - sum += zr36050_set_dri(ptr); - - /* setup the fixed jpeg tables - maybe variable, though - - * (see table init section above) */ - dprintk(3, "%s: write DQT, DHT, APP\n", ptr->name); - sum += zr36050_pushit(ptr, ZR050_DQT_IDX, - sizeof(zr36050_dqt), zr36050_dqt); - sum += zr36050_pushit(ptr, ZR050_DHT_IDX, - sizeof(zr36050_dht), zr36050_dht); - zr36050_write(ptr, ZR050_APP_IDX, 0xff); - zr36050_write(ptr, ZR050_APP_IDX + 1, 0xe0 + ptr->app.appn); - zr36050_write(ptr, ZR050_APP_IDX + 2, 0x00); - zr36050_write(ptr, ZR050_APP_IDX + 3, ptr->app.len + 2); - sum += zr36050_pushit(ptr, ZR050_APP_IDX + 4, 60, - ptr->app.data) + 4; - zr36050_write(ptr, ZR050_COM_IDX, 0xff); - zr36050_write(ptr, ZR050_COM_IDX + 1, 0xfe); - zr36050_write(ptr, ZR050_COM_IDX + 2, 0x00); - zr36050_write(ptr, ZR050_COM_IDX + 3, ptr->com.len + 2); - sum += zr36050_pushit(ptr, ZR050_COM_IDX + 4, 60, - ptr->com.data) + 4; - - /* do the internal huffman table preload */ - zr36050_write(ptr, ZR050_MARKERS_EN, ZR050_ME_DHTI); - - zr36050_write(ptr, ZR050_GO, 1); // launch codec - zr36050_wait_end(ptr); - dprintk(2, "%s: Status after table preload: 0x%02x\n", - ptr->name, ptr->status1); - - if ((ptr->status1 & 0x4) == 0) { - dprintk(1, KERN_ERR "%s: init aborted!\n", - ptr->name); - return; // something is wrong, its timed out!!!! - } - - /* setup misc. data for compression (target code sizes) */ - - /* size of compressed code to reach without header data */ - sum = ptr->real_code_vol - sum; - bitcnt = sum << 3; /* need the size in bits */ - - tmp = bitcnt >> 16; - dprintk(3, - "%s: code: csize=%d, tot=%d, bit=%ld, highbits=%ld\n", - ptr->name, sum, ptr->real_code_vol, bitcnt, tmp); - zr36050_write(ptr, ZR050_TCV_NET_HI, tmp >> 8); - zr36050_write(ptr, ZR050_TCV_NET_MH, tmp & 0xff); - tmp = bitcnt & 0xffff; - zr36050_write(ptr, ZR050_TCV_NET_ML, tmp >> 8); - zr36050_write(ptr, ZR050_TCV_NET_LO, tmp & 0xff); - - bitcnt -= bitcnt >> 7; // bits without stuffing - bitcnt -= ((bitcnt * 5) >> 6); // bits without eob - - tmp = bitcnt >> 16; - dprintk(3, "%s: code: nettobit=%ld, highnettobits=%ld\n", - ptr->name, bitcnt, tmp); - zr36050_write(ptr, ZR050_TCV_DATA_HI, tmp >> 8); - zr36050_write(ptr, ZR050_TCV_DATA_MH, tmp & 0xff); - tmp = bitcnt & 0xffff; - zr36050_write(ptr, ZR050_TCV_DATA_ML, tmp >> 8); - zr36050_write(ptr, ZR050_TCV_DATA_LO, tmp & 0xff); - - /* compression setup with or without bitrate control */ - zr36050_write(ptr, ZR050_MODE, - ZR050_MO_COMP | ZR050_MO_PASS2 | - (ptr->bitrate_ctrl ? ZR050_MO_BRC : 0)); - - /* this headers seem to deliver "valid AVI" jpeg frames */ - zr36050_write(ptr, ZR050_MARKERS_EN, - ZR050_ME_DQT | ZR050_ME_DHT | - ((ptr->app.len > 0) ? ZR050_ME_APP : 0) | - ((ptr->com.len > 0) ? ZR050_ME_COM : 0)); - } else { - dprintk(2, "%s: EXPANSION SETUP\n", ptr->name); - - /* 050 communicates with 055 in master mode */ - zr36050_write(ptr, ZR050_HARDWARE, - ZR050_HW_MSTR | ZR050_HW_CFIS_2_CLK); - - /* encoding table preload */ - zr36050_write(ptr, ZR050_MODE, ZR050_MO_TLM); - - /* disable all IRQs */ - zr36050_write(ptr, ZR050_INT_REQ_0, 0); - zr36050_write(ptr, ZR050_INT_REQ_1, 3); // low 2 bits always 1 - - dprintk(3, "%s: write DHT\n", ptr->name); - zr36050_pushit(ptr, ZR050_DHT_IDX, sizeof(zr36050_dht), - zr36050_dht); - - /* do the internal huffman table preload */ - zr36050_write(ptr, ZR050_MARKERS_EN, ZR050_ME_DHTI); - - zr36050_write(ptr, ZR050_GO, 1); // launch codec - zr36050_wait_end(ptr); - dprintk(2, "%s: Status after table preload: 0x%02x\n", - ptr->name, ptr->status1); - - if ((ptr->status1 & 0x4) == 0) { - dprintk(1, KERN_ERR "%s: init aborted!\n", - ptr->name); - return; // something is wrong, its timed out!!!! - } - - /* setup misc. data for expansion */ - zr36050_write(ptr, ZR050_MODE, 0); - zr36050_write(ptr, ZR050_MARKERS_EN, 0); - } - - /* adr on selected, to allow GO from master */ - zr36050_read(ptr, 0); -} - -/* ========================================================================= - CODEC API FUNCTIONS - - this functions are accessed by the master via the API structure - ========================================================================= */ - -/* set compression/expansion mode and launches codec - - this should be the last call from the master before starting processing */ -static int -zr36050_set_mode (struct videocodec *codec, - int mode) -{ - struct zr36050 *ptr = (struct zr36050 *) codec->data; - - dprintk(2, "%s: set_mode %d call\n", ptr->name, mode); - - if ((mode != CODEC_DO_EXPANSION) && (mode != CODEC_DO_COMPRESSION)) - return -EINVAL; - - ptr->mode = mode; - zr36050_init(ptr); - - return 0; -} - -/* set picture size (norm is ignored as the codec doesn't know about it) */ -static int -zr36050_set_video (struct videocodec *codec, - struct tvnorm *norm, - struct vfe_settings *cap, - struct vfe_polarity *pol) -{ - struct zr36050 *ptr = (struct zr36050 *) codec->data; - int size; - - dprintk(2, "%s: set_video %d.%d, %d/%d-%dx%d (0x%x) q%d call\n", - ptr->name, norm->HStart, norm->VStart, - cap->x, cap->y, cap->width, cap->height, - cap->decimation, cap->quality); - /* if () return -EINVAL; - * trust the master driver that it knows what it does - so - * we allow invalid startx/y and norm for now ... */ - ptr->width = cap->width / (cap->decimation & 0xff); - ptr->height = cap->height / ((cap->decimation >> 8) & 0xff); - - /* (KM) JPEG quality */ - size = ptr->width * ptr->height; - size *= 16; /* size in bits */ - /* apply quality setting */ - size = size * cap->quality / 200; - - /* Minimum: 1kb */ - if (size < 8192) - size = 8192; - /* Maximum: 7/8 of code buffer */ - if (size > ptr->total_code_vol * 7) - size = ptr->total_code_vol * 7; - - ptr->real_code_vol = size >> 3; /* in bytes */ - - /* Set max_block_vol here (previously in zr36050_init, moved - * here for consistency with zr36060 code */ - zr36050_write(ptr, ZR050_MBCV, ptr->max_block_vol); - - return 0; -} - -/* additional control functions */ -static int -zr36050_control (struct videocodec *codec, - int type, - int size, - void *data) -{ - struct zr36050 *ptr = (struct zr36050 *) codec->data; - int *ival = (int *) data; - - dprintk(2, "%s: control %d call with %d byte\n", ptr->name, type, - size); - - switch (type) { - case CODEC_G_STATUS: /* get last status */ - if (size != sizeof(int)) - return -EFAULT; - zr36050_read_status1(ptr); - *ival = ptr->status1; - break; - - case CODEC_G_CODEC_MODE: - if (size != sizeof(int)) - return -EFAULT; - *ival = CODEC_MODE_BJPG; - break; - - case CODEC_S_CODEC_MODE: - if (size != sizeof(int)) - return -EFAULT; - if (*ival != CODEC_MODE_BJPG) - return -EINVAL; - /* not needed, do nothing */ - return 0; - - case CODEC_G_VFE: - case CODEC_S_VFE: - /* not needed, do nothing */ - return 0; - - case CODEC_S_MMAP: - /* not available, give an error */ - return -ENXIO; - - case CODEC_G_JPEG_TDS_BYTE: /* get target volume in byte */ - if (size != sizeof(int)) - return -EFAULT; - *ival = ptr->total_code_vol; - break; - - case CODEC_S_JPEG_TDS_BYTE: /* get target volume in byte */ - if (size != sizeof(int)) - return -EFAULT; - ptr->total_code_vol = *ival; - /* (Kieran Morrissey) - * code copied from zr36060.c to ensure proper bitrate */ - ptr->real_code_vol = (ptr->total_code_vol * 6) >> 3; - break; - - case CODEC_G_JPEG_SCALE: /* get scaling factor */ - if (size != sizeof(int)) - return -EFAULT; - *ival = zr36050_read_scalefactor(ptr); - break; - - case CODEC_S_JPEG_SCALE: /* set scaling factor */ - if (size != sizeof(int)) - return -EFAULT; - ptr->scalefact = *ival; - break; - - case CODEC_G_JPEG_APP_DATA: { /* get appn marker data */ - struct jpeg_app_marker *app = data; - - if (size != sizeof(struct jpeg_app_marker)) - return -EFAULT; - - *app = ptr->app; - break; - } - - case CODEC_S_JPEG_APP_DATA: { /* set appn marker data */ - struct jpeg_app_marker *app = data; - - if (size != sizeof(struct jpeg_app_marker)) - return -EFAULT; - - ptr->app = *app; - break; - } - - case CODEC_G_JPEG_COM_DATA: { /* get comment marker data */ - struct jpeg_com_marker *com = data; - - if (size != sizeof(struct jpeg_com_marker)) - return -EFAULT; - - *com = ptr->com; - break; - } - - case CODEC_S_JPEG_COM_DATA: { /* set comment marker data */ - struct jpeg_com_marker *com = data; - - if (size != sizeof(struct jpeg_com_marker)) - return -EFAULT; - - ptr->com = *com; - break; - } - - default: - return -EINVAL; - } - - return size; -} - -/* ========================================================================= - Exit and unregister function: - - Deinitializes Zoran's JPEG processor - ========================================================================= */ - -static int -zr36050_unset (struct videocodec *codec) -{ - struct zr36050 *ptr = codec->data; - - if (ptr) { - /* do wee need some codec deinit here, too ???? */ - - dprintk(1, "%s: finished codec #%d\n", ptr->name, - ptr->num); - kfree(ptr); - codec->data = NULL; - - zr36050_codecs--; - return 0; - } - - return -EFAULT; -} - -/* ========================================================================= - Setup and registry function: - - Initializes Zoran's JPEG processor - - Also sets pixel size, average code size, mode (compr./decompr.) - (the given size is determined by the processor with the video interface) - ========================================================================= */ - -static int -zr36050_setup (struct videocodec *codec) -{ - struct zr36050 *ptr; - int res; - - dprintk(2, "zr36050: initializing MJPEG subsystem #%d.\n", - zr36050_codecs); - - if (zr36050_codecs == MAX_CODECS) { - dprintk(1, - KERN_ERR "zr36050: Can't attach more codecs!\n"); - return -ENOSPC; - } - //mem structure init - codec->data = ptr = kzalloc(sizeof(struct zr36050), GFP_KERNEL); - if (NULL == ptr) { - dprintk(1, KERN_ERR "zr36050: Can't get enough memory!\n"); - return -ENOMEM; - } - - snprintf(ptr->name, sizeof(ptr->name), "zr36050[%d]", - zr36050_codecs); - ptr->num = zr36050_codecs++; - ptr->codec = codec; - - //testing - res = zr36050_basic_test(ptr); - if (res < 0) { - zr36050_unset(codec); - return res; - } - //final setup - memcpy(ptr->h_samp_ratio, zr36050_decimation_h, 8); - memcpy(ptr->v_samp_ratio, zr36050_decimation_v, 8); - - ptr->bitrate_ctrl = 0; /* 0 or 1 - fixed file size flag - * (what is the difference?) */ - ptr->mode = CODEC_DO_COMPRESSION; - ptr->width = 384; - ptr->height = 288; - ptr->total_code_vol = 16000; - ptr->max_block_vol = 240; - ptr->scalefact = 0x100; - ptr->dri = 1; - - /* no app/com marker by default */ - ptr->app.appn = 0; - ptr->app.len = 0; - ptr->com.len = 0; - - zr36050_init(ptr); - - dprintk(1, KERN_INFO "%s: codec attached and running\n", - ptr->name); - - return 0; -} - -static const struct videocodec zr36050_codec = { - .owner = THIS_MODULE, - .name = "zr36050", - .magic = 0L, // magic not used - .flags = - CODEC_FLAG_JPEG | CODEC_FLAG_HARDWARE | CODEC_FLAG_ENCODER | - CODEC_FLAG_DECODER, - .type = CODEC_TYPE_ZR36050, - .setup = zr36050_setup, // functionality - .unset = zr36050_unset, - .set_mode = zr36050_set_mode, - .set_video = zr36050_set_video, - .control = zr36050_control, - // others are not used -}; - -/* ========================================================================= - HOOK IN DRIVER AS KERNEL MODULE - ========================================================================= */ - -static int __init -zr36050_init_module (void) -{ - //dprintk(1, "ZR36050 driver %s\n",ZR050_VERSION); - zr36050_codecs = 0; - return videocodec_register(&zr36050_codec); -} - -static void __exit -zr36050_cleanup_module (void) -{ - if (zr36050_codecs) { - dprintk(1, - "zr36050: something's wrong - %d codecs left somehow.\n", - zr36050_codecs); - } - videocodec_unregister(&zr36050_codec); -} - -module_init(zr36050_init_module); -module_exit(zr36050_cleanup_module); - -MODULE_AUTHOR("Wolfgang Scherr "); -MODULE_DESCRIPTION("Driver module for ZR36050 jpeg processors " - ZR050_VERSION); -MODULE_LICENSE("GPL"); diff --git a/drivers/media/video/zr36050.h b/drivers/media/video/zr36050.h deleted file mode 100644 index 9f52f0c..0000000 --- a/drivers/media/video/zr36050.h +++ /dev/null @@ -1,184 +0,0 @@ -/* - * Zoran ZR36050 basic configuration functions - header file - * - * Copyright (C) 2001 Wolfgang Scherr - * - * $Id: zr36050.h,v 1.1.2.2 2003/01/14 21:18:22 rbultje Exp $ - * - * ------------------------------------------------------------------------ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - * - * ------------------------------------------------------------------------ - */ - -#ifndef ZR36050_H -#define ZR36050_H - -#include "videocodec.h" - -/* data stored for each zoran jpeg codec chip */ -struct zr36050 { - char name[32]; - int num; - /* io datastructure */ - struct videocodec *codec; - // last coder status - __u8 status1; - // actual coder setup - int mode; - - __u16 width; - __u16 height; - - __u16 bitrate_ctrl; - - __u32 total_code_vol; - __u32 real_code_vol; - __u16 max_block_vol; - - __u8 h_samp_ratio[8]; - __u8 v_samp_ratio[8]; - __u16 scalefact; - __u16 dri; - - /* com/app marker */ - struct jpeg_com_marker com; - struct jpeg_app_marker app; -}; - -/* zr36050 register addresses */ -#define ZR050_GO 0x000 -#define ZR050_HARDWARE 0x002 -#define ZR050_MODE 0x003 -#define ZR050_OPTIONS 0x004 -#define ZR050_MBCV 0x005 -#define ZR050_MARKERS_EN 0x006 -#define ZR050_INT_REQ_0 0x007 -#define ZR050_INT_REQ_1 0x008 -#define ZR050_TCV_NET_HI 0x009 -#define ZR050_TCV_NET_MH 0x00a -#define ZR050_TCV_NET_ML 0x00b -#define ZR050_TCV_NET_LO 0x00c -#define ZR050_TCV_DATA_HI 0x00d -#define ZR050_TCV_DATA_MH 0x00e -#define ZR050_TCV_DATA_ML 0x00f -#define ZR050_TCV_DATA_LO 0x010 -#define ZR050_SF_HI 0x011 -#define ZR050_SF_LO 0x012 -#define ZR050_AF_HI 0x013 -#define ZR050_AF_M 0x014 -#define ZR050_AF_LO 0x015 -#define ZR050_ACV_HI 0x016 -#define ZR050_ACV_MH 0x017 -#define ZR050_ACV_ML 0x018 -#define ZR050_ACV_LO 0x019 -#define ZR050_ACT_HI 0x01a -#define ZR050_ACT_MH 0x01b -#define ZR050_ACT_ML 0x01c -#define ZR050_ACT_LO 0x01d -#define ZR050_ACV_TRUN_HI 0x01e -#define ZR050_ACV_TRUN_MH 0x01f -#define ZR050_ACV_TRUN_ML 0x020 -#define ZR050_ACV_TRUN_LO 0x021 -#define ZR050_STATUS_0 0x02e -#define ZR050_STATUS_1 0x02f - -#define ZR050_SOF_IDX 0x040 -#define ZR050_SOS1_IDX 0x07a -#define ZR050_SOS2_IDX 0x08a -#define ZR050_SOS3_IDX 0x09a -#define ZR050_SOS4_IDX 0x0aa -#define ZR050_DRI_IDX 0x0c0 -#define ZR050_DNL_IDX 0x0c6 -#define ZR050_DQT_IDX 0x0cc -#define ZR050_DHT_IDX 0x1d4 -#define ZR050_APP_IDX 0x380 -#define ZR050_COM_IDX 0x3c0 - -/* zr36050 hardware register bits */ - -#define ZR050_HW_BSWD 0x80 -#define ZR050_HW_MSTR 0x40 -#define ZR050_HW_DMA 0x20 -#define ZR050_HW_CFIS_1_CLK 0x00 -#define ZR050_HW_CFIS_2_CLK 0x04 -#define ZR050_HW_CFIS_3_CLK 0x08 -#define ZR050_HW_CFIS_4_CLK 0x0C -#define ZR050_HW_CFIS_5_CLK 0x10 -#define ZR050_HW_CFIS_6_CLK 0x14 -#define ZR050_HW_CFIS_7_CLK 0x18 -#define ZR050_HW_CFIS_8_CLK 0x1C -#define ZR050_HW_BELE 0x01 - -/* zr36050 mode register bits */ - -#define ZR050_MO_COMP 0x80 -#define ZR050_MO_COMP 0x80 -#define ZR050_MO_ATP 0x40 -#define ZR050_MO_PASS2 0x20 -#define ZR050_MO_TLM 0x10 -#define ZR050_MO_DCONLY 0x08 -#define ZR050_MO_BRC 0x04 - -#define ZR050_MO_ATP 0x40 -#define ZR050_MO_PASS2 0x20 -#define ZR050_MO_TLM 0x10 -#define ZR050_MO_DCONLY 0x08 - -/* zr36050 option register bits */ - -#define ZR050_OP_NSCN_1 0x00 -#define ZR050_OP_NSCN_2 0x20 -#define ZR050_OP_NSCN_3 0x40 -#define ZR050_OP_NSCN_4 0x60 -#define ZR050_OP_NSCN_5 0x80 -#define ZR050_OP_NSCN_6 0xA0 -#define ZR050_OP_NSCN_7 0xC0 -#define ZR050_OP_NSCN_8 0xE0 -#define ZR050_OP_OVF 0x10 - - -/* zr36050 markers-enable register bits */ - -#define ZR050_ME_APP 0x80 -#define ZR050_ME_COM 0x40 -#define ZR050_ME_DRI 0x20 -#define ZR050_ME_DQT 0x10 -#define ZR050_ME_DHT 0x08 -#define ZR050_ME_DNL 0x04 -#define ZR050_ME_DQTI 0x02 -#define ZR050_ME_DHTI 0x01 - -/* zr36050 status0/1 register bit masks */ - -#define ZR050_ST_RST_MASK 0x20 -#define ZR050_ST_SOF_MASK 0x02 -#define ZR050_ST_SOS_MASK 0x02 -#define ZR050_ST_DATRDY_MASK 0x80 -#define ZR050_ST_MRKDET_MASK 0x40 -#define ZR050_ST_RFM_MASK 0x10 -#define ZR050_ST_RFD_MASK 0x08 -#define ZR050_ST_END_MASK 0x04 -#define ZR050_ST_TCVOVF_MASK 0x02 -#define ZR050_ST_DATOVF_MASK 0x01 - -/* pixel component idx */ - -#define ZR050_Y_COMPONENT 0 -#define ZR050_U_COMPONENT 1 -#define ZR050_V_COMPONENT 2 - -#endif /*fndef ZR36050_H */ diff --git a/drivers/media/video/zr36057.h b/drivers/media/video/zr36057.h deleted file mode 100644 index 54c9362..0000000 --- a/drivers/media/video/zr36057.h +++ /dev/null @@ -1,168 +0,0 @@ -/* - * zr36057.h - zr36057 register offsets - * - * Copyright (C) 1998 Dave Perks - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#ifndef _ZR36057_H_ -#define _ZR36057_H_ - - -/* Zoran ZR36057 registers */ - -#define ZR36057_VFEHCR 0x000 /* Video Front End, Horizontal Configuration Register */ -#define ZR36057_VFEHCR_HSPol (1<<30) -#define ZR36057_VFEHCR_HStart 10 -#define ZR36057_VFEHCR_HEnd 0 -#define ZR36057_VFEHCR_Hmask 0x3ff - -#define ZR36057_VFEVCR 0x004 /* Video Front End, Vertical Configuration Register */ -#define ZR36057_VFEVCR_VSPol (1<<30) -#define ZR36057_VFEVCR_VStart 10 -#define ZR36057_VFEVCR_VEnd 0 -#define ZR36057_VFEVCR_Vmask 0x3ff - -#define ZR36057_VFESPFR 0x008 /* Video Front End, Scaler and Pixel Format Register */ -#define ZR36057_VFESPFR_ExtFl (1<<26) -#define ZR36057_VFESPFR_TopField (1<<25) -#define ZR36057_VFESPFR_VCLKPol (1<<24) -#define ZR36057_VFESPFR_HFilter 21 -#define ZR36057_VFESPFR_HorDcm 14 -#define ZR36057_VFESPFR_VerDcm 8 -#define ZR36057_VFESPFR_DispMode 6 -#define ZR36057_VFESPFR_YUV422 (0<<3) -#define ZR36057_VFESPFR_RGB888 (1<<3) -#define ZR36057_VFESPFR_RGB565 (2<<3) -#define ZR36057_VFESPFR_RGB555 (3<<3) -#define ZR36057_VFESPFR_ErrDif (1<<2) -#define ZR36057_VFESPFR_Pack24 (1<<1) -#define ZR36057_VFESPFR_LittleEndian (1<<0) - -#define ZR36057_VDTR 0x00c /* Video Display "Top" Register */ - -#define ZR36057_VDBR 0x010 /* Video Display "Bottom" Register */ - -#define ZR36057_VSSFGR 0x014 /* Video Stride, Status, and Frame Grab Register */ -#define ZR36057_VSSFGR_DispStride 16 -#define ZR36057_VSSFGR_VidOvf (1<<8) -#define ZR36057_VSSFGR_SnapShot (1<<1) -#define ZR36057_VSSFGR_FrameGrab (1<<0) - -#define ZR36057_VDCR 0x018 /* Video Display Configuration Register */ -#define ZR36057_VDCR_VidEn (1<<31) -#define ZR36057_VDCR_MinPix 24 -#define ZR36057_VDCR_Triton (1<<24) -#define ZR36057_VDCR_VidWinHt 12 -#define ZR36057_VDCR_VidWinWid 0 - -#define ZR36057_MMTR 0x01c /* Masking Map "Top" Register */ - -#define ZR36057_MMBR 0x020 /* Masking Map "Bottom" Register */ - -#define ZR36057_OCR 0x024 /* Overlay Control Register */ -#define ZR36057_OCR_OvlEnable (1 << 15) -#define ZR36057_OCR_MaskStride 0 - -#define ZR36057_SPGPPCR 0x028 /* System, PCI, and General Purpose Pins Control Register */ -#define ZR36057_SPGPPCR_SoftReset (1<<24) - -#define ZR36057_GPPGCR1 0x02c /* General Purpose Pins and GuestBus Control Register (1) */ - -#define ZR36057_MCSAR 0x030 /* MPEG Code Source Address Register */ - -#define ZR36057_MCTCR 0x034 /* MPEG Code Transfer Control Register */ -#define ZR36057_MCTCR_CodTime (1 << 30) -#define ZR36057_MCTCR_CEmpty (1 << 29) -#define ZR36057_MCTCR_CFlush (1 << 28) -#define ZR36057_MCTCR_CodGuestID 20 -#define ZR36057_MCTCR_CodGuestReg 16 - -#define ZR36057_MCMPR 0x038 /* MPEG Code Memory Pointer Register */ - -#define ZR36057_ISR 0x03c /* Interrupt Status Register */ -#define ZR36057_ISR_GIRQ1 (1<<30) -#define ZR36057_ISR_GIRQ0 (1<<29) -#define ZR36057_ISR_CodRepIRQ (1<<28) -#define ZR36057_ISR_JPEGRepIRQ (1<<27) - -#define ZR36057_ICR 0x040 /* Interrupt Control Register */ -#define ZR36057_ICR_GIRQ1 (1<<30) -#define ZR36057_ICR_GIRQ0 (1<<29) -#define ZR36057_ICR_CodRepIRQ (1<<28) -#define ZR36057_ICR_JPEGRepIRQ (1<<27) -#define ZR36057_ICR_IntPinEn (1<<24) - -#define ZR36057_I2CBR 0x044 /* I2C Bus Register */ -#define ZR36057_I2CBR_SDA (1<<1) -#define ZR36057_I2CBR_SCL (1<<0) - -#define ZR36057_JMC 0x100 /* JPEG Mode and Control */ -#define ZR36057_JMC_JPG (1 << 31) -#define ZR36057_JMC_JPGExpMode (0 << 29) -#define ZR36057_JMC_JPGCmpMode (1 << 29) -#define ZR36057_JMC_MJPGExpMode (2 << 29) -#define ZR36057_JMC_MJPGCmpMode (3 << 29) -#define ZR36057_JMC_RTBUSY_FB (1 << 6) -#define ZR36057_JMC_Go_en (1 << 5) -#define ZR36057_JMC_SyncMstr (1 << 4) -#define ZR36057_JMC_Fld_per_buff (1 << 3) -#define ZR36057_JMC_VFIFO_FB (1 << 2) -#define ZR36057_JMC_CFIFO_FB (1 << 1) -#define ZR36057_JMC_Stll_LitEndian (1 << 0) - -#define ZR36057_JPC 0x104 /* JPEG Process Control */ -#define ZR36057_JPC_P_Reset (1 << 7) -#define ZR36057_JPC_CodTrnsEn (1 << 5) -#define ZR36057_JPC_Active (1 << 0) - -#define ZR36057_VSP 0x108 /* Vertical Sync Parameters */ -#define ZR36057_VSP_VsyncSize 16 -#define ZR36057_VSP_FrmTot 0 - -#define ZR36057_HSP 0x10c /* Horizontal Sync Parameters */ -#define ZR36057_HSP_HsyncStart 16 -#define ZR36057_HSP_LineTot 0 - -#define ZR36057_FHAP 0x110 /* Field Horizontal Active Portion */ -#define ZR36057_FHAP_NAX 16 -#define ZR36057_FHAP_PAX 0 - -#define ZR36057_FVAP 0x114 /* Field Vertical Active Portion */ -#define ZR36057_FVAP_NAY 16 -#define ZR36057_FVAP_PAY 0 - -#define ZR36057_FPP 0x118 /* Field Process Parameters */ -#define ZR36057_FPP_Odd_Even (1 << 0) - -#define ZR36057_JCBA 0x11c /* JPEG Code Base Address */ - -#define ZR36057_JCFT 0x120 /* JPEG Code FIFO Threshold */ - -#define ZR36057_JCGI 0x124 /* JPEG Codec Guest ID */ -#define ZR36057_JCGI_JPEGuestID 4 -#define ZR36057_JCGI_JPEGuestReg 0 - -#define ZR36057_GCR2 0x12c /* GuestBus Control Register (2) */ - -#define ZR36057_POR 0x200 /* Post Office Register */ -#define ZR36057_POR_POPen (1<<25) -#define ZR36057_POR_POTime (1<<24) -#define ZR36057_POR_PODir (1<<23) - -#define ZR36057_STR 0x300 /* "Still" Transfer Register */ - -#endif diff --git a/drivers/media/video/zr36060.c b/drivers/media/video/zr36060.c deleted file mode 100644 index 8e74054..0000000 --- a/drivers/media/video/zr36060.c +++ /dev/null @@ -1,1014 +0,0 @@ -/* - * Zoran ZR36060 basic configuration functions - * - * Copyright (C) 2002 Laurent Pinchart - * - * $Id: zr36060.c,v 1.1.2.22 2003/05/06 09:35:36 rbultje Exp $ - * - * ------------------------------------------------------------------------ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - * - * ------------------------------------------------------------------------ - */ - -#define ZR060_VERSION "v0.7" - -#include -#include -#include -#include - -#include -#include - -/* includes for structures and defines regarding video - #include */ - -/* I/O commands, error codes */ -#include -//#include - -/* headerfile of this module */ -#include "zr36060.h" - -/* codec io API */ -#include "videocodec.h" - -/* it doesn't make sense to have more than 20 or so, - just to prevent some unwanted loops */ -#define MAX_CODECS 20 - -/* amount of chips attached via this driver */ -static int zr36060_codecs; - -static int low_bitrate; -module_param(low_bitrate, bool, 0); -MODULE_PARM_DESC(low_bitrate, "Buz compatibility option, halves bitrate"); - -/* debugging is available via module parameter */ -static int debug; -module_param(debug, int, 0); -MODULE_PARM_DESC(debug, "Debug level (0-4)"); - -#define dprintk(num, format, args...) \ - do { \ - if (debug >= num) \ - printk(format, ##args); \ - } while (0) - -/* ========================================================================= - Local hardware I/O functions: - - read/write via codec layer (registers are located in the master device) - ========================================================================= */ - -/* read and write functions */ -static u8 -zr36060_read (struct zr36060 *ptr, - u16 reg) -{ - u8 value = 0; - - // just in case something is wrong... - if (ptr->codec->master_data->readreg) - value = (ptr->codec->master_data->readreg(ptr->codec, - reg)) & 0xff; - else - dprintk(1, - KERN_ERR "%s: invalid I/O setup, nothing read!\n", - ptr->name); - - //dprintk(4, "%s: reading from 0x%04x: %02x\n",ptr->name,reg,value); - - return value; -} - -static void -zr36060_write(struct zr36060 *ptr, - u16 reg, - u8 value) -{ - //dprintk(4, "%s: writing 0x%02x to 0x%04x\n",ptr->name,value,reg); - dprintk(4, "0x%02x @0x%04x\n", value, reg); - - // just in case something is wrong... - if (ptr->codec->master_data->writereg) - ptr->codec->master_data->writereg(ptr->codec, reg, value); - else - dprintk(1, - KERN_ERR - "%s: invalid I/O setup, nothing written!\n", - ptr->name); -} - -/* ========================================================================= - Local helper function: - - status read - ========================================================================= */ - -/* status is kept in datastructure */ -static u8 -zr36060_read_status (struct zr36060 *ptr) -{ - ptr->status = zr36060_read(ptr, ZR060_CFSR); - - zr36060_read(ptr, 0); - return ptr->status; -} - -/* ========================================================================= - Local helper function: - - scale factor read - ========================================================================= */ - -/* scale factor is kept in datastructure */ -static u16 -zr36060_read_scalefactor (struct zr36060 *ptr) -{ - ptr->scalefact = (zr36060_read(ptr, ZR060_SF_HI) << 8) | - (zr36060_read(ptr, ZR060_SF_LO) & 0xFF); - - /* leave 0 selected for an eventually GO from master */ - zr36060_read(ptr, 0); - return ptr->scalefact; -} - -/* ========================================================================= - Local helper function: - - wait if codec is ready to proceed (end of processing) or time is over - ========================================================================= */ - -static void -zr36060_wait_end (struct zr36060 *ptr) -{ - int i = 0; - - while (zr36060_read_status(ptr) & ZR060_CFSR_Busy) { - udelay(1); - if (i++ > 200000) { // 200ms, there is for sure something wrong!!! - dprintk(1, - "%s: timeout at wait_end (last status: 0x%02x)\n", - ptr->name, ptr->status); - break; - } - } -} - -/* ========================================================================= - Local helper function: - - basic test of "connectivity", writes/reads to/from memory the SOF marker - ========================================================================= */ - -static int -zr36060_basic_test (struct zr36060 *ptr) -{ - if ((zr36060_read(ptr, ZR060_IDR_DEV) != 0x33) && - (zr36060_read(ptr, ZR060_IDR_REV) != 0x01)) { - dprintk(1, - KERN_ERR - "%s: attach failed, can't connect to jpeg processor!\n", - ptr->name); - return -ENXIO; - } - - zr36060_wait_end(ptr); - if (ptr->status & ZR060_CFSR_Busy) { - dprintk(1, - KERN_ERR - "%s: attach failed, jpeg processor failed (end flag)!\n", - ptr->name); - return -EBUSY; - } - - return 0; /* looks good! */ -} - -/* ========================================================================= - Local helper function: - - simple loop for pushing the init datasets - ========================================================================= */ - -static int -zr36060_pushit (struct zr36060 *ptr, - u16 startreg, - u16 len, - const char *data) -{ - int i = 0; - - dprintk(4, "%s: write data block to 0x%04x (len=%d)\n", ptr->name, - startreg, len); - while (i < len) { - zr36060_write(ptr, startreg++, data[i++]); - } - - return i; -} - -/* ========================================================================= - Basic datasets: - - jpeg baseline setup data (you find it on lots places in internet, or just - extract it from any regular .jpg image...) - - Could be variable, but until it's not needed it they are just fixed to save - memory. Otherwise expand zr36060 structure with arrays, push the values to - it and initalize from there, as e.g. the linux zr36057/60 driver does it. - ========================================================================= */ - -static const char zr36060_dqt[0x86] = { - 0xff, 0xdb, //Marker: DQT - 0x00, 0x84, //Length: 2*65+2 - 0x00, //Pq,Tq first table - 0x10, 0x0b, 0x0c, 0x0e, 0x0c, 0x0a, 0x10, 0x0e, - 0x0d, 0x0e, 0x12, 0x11, 0x10, 0x13, 0x18, 0x28, - 0x1a, 0x18, 0x16, 0x16, 0x18, 0x31, 0x23, 0x25, - 0x1d, 0x28, 0x3a, 0x33, 0x3d, 0x3c, 0x39, 0x33, - 0x38, 0x37, 0x40, 0x48, 0x5c, 0x4e, 0x40, 0x44, - 0x57, 0x45, 0x37, 0x38, 0x50, 0x6d, 0x51, 0x57, - 0x5f, 0x62, 0x67, 0x68, 0x67, 0x3e, 0x4d, 0x71, - 0x79, 0x70, 0x64, 0x78, 0x5c, 0x65, 0x67, 0x63, - 0x01, //Pq,Tq second table - 0x11, 0x12, 0x12, 0x18, 0x15, 0x18, 0x2f, 0x1a, - 0x1a, 0x2f, 0x63, 0x42, 0x38, 0x42, 0x63, 0x63, - 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, - 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, - 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, - 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, - 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, - 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63 -}; - -static const char zr36060_dht[0x1a4] = { - 0xff, 0xc4, //Marker: DHT - 0x01, 0xa2, //Length: 2*AC, 2*DC - 0x00, //DC first table - 0x00, 0x01, 0x05, 0x01, 0x01, 0x01, 0x01, 0x01, - 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, - 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, 0x08, 0x09, 0x0A, 0x0B, - 0x01, //DC second table - 0x00, 0x03, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, - 0x01, 0x01, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, - 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, 0x08, 0x09, 0x0A, 0x0B, - 0x10, //AC first table - 0x00, 0x02, 0x01, 0x03, 0x03, 0x02, 0x04, 0x03, - 0x05, 0x05, 0x04, 0x04, 0x00, 0x00, - 0x01, 0x7D, 0x01, 0x02, 0x03, 0x00, 0x04, 0x11, - 0x05, 0x12, 0x21, 0x31, 0x41, 0x06, 0x13, 0x51, 0x61, - 0x07, 0x22, 0x71, 0x14, 0x32, 0x81, 0x91, 0xA1, - 0x08, 0x23, 0x42, 0xB1, 0xC1, 0x15, 0x52, 0xD1, 0xF0, 0x24, - 0x33, 0x62, 0x72, 0x82, 0x09, 0x0A, 0x16, 0x17, - 0x18, 0x19, 0x1A, 0x25, 0x26, 0x27, 0x28, 0x29, 0x2A, 0x34, - 0x35, 0x36, 0x37, 0x38, 0x39, 0x3A, 0x43, 0x44, - 0x45, 0x46, 0x47, 0x48, 0x49, 0x4A, 0x53, 0x54, 0x55, 0x56, - 0x57, 0x58, 0x59, 0x5A, 0x63, 0x64, 0x65, 0x66, - 0x67, 0x68, 0x69, 0x6A, 0x73, 0x74, 0x75, 0x76, 0x77, 0x78, - 0x79, 0x7A, 0x83, 0x84, 0x85, 0x86, 0x87, 0x88, - 0x89, 0x8A, 0x92, 0x93, 0x94, 0x95, 0x96, 0x97, 0x98, 0x99, - 0x9A, 0xA2, 0xA3, 0xA4, 0xA5, 0xA6, 0xA7, 0xA8, - 0xA9, 0xAA, 0xB2, 0xB3, 0xB4, 0xB5, 0xB6, 0xB7, 0xB8, 0xB9, - 0xBA, 0xC2, 0xC3, 0xC4, 0xC5, 0xC6, 0xC7, 0xC8, - 0xC9, 0xCA, 0xD2, 0xD3, 0xD4, 0xD5, 0xD6, 0xD7, 0xD8, 0xD9, - 0xDA, 0xE1, 0xE2, 0xE3, 0xE4, 0xE5, 0xE6, 0xE7, - 0xE8, 0xE9, 0xEA, 0xF1, 0xF2, 0xF3, 0xF4, 0xF5, 0xF6, 0xF7, - 0xF8, 0xF9, 0xFA, - 0x11, //AC second table - 0x00, 0x02, 0x01, 0x02, 0x04, 0x04, 0x03, 0x04, - 0x07, 0x05, 0x04, 0x04, 0x00, 0x01, - 0x02, 0x77, 0x00, 0x01, 0x02, 0x03, 0x11, 0x04, - 0x05, 0x21, 0x31, 0x06, 0x12, 0x41, 0x51, 0x07, 0x61, 0x71, - 0x13, 0x22, 0x32, 0x81, 0x08, 0x14, 0x42, 0x91, - 0xA1, 0xB1, 0xC1, 0x09, 0x23, 0x33, 0x52, 0xF0, 0x15, 0x62, - 0x72, 0xD1, 0x0A, 0x16, 0x24, 0x34, 0xE1, 0x25, - 0xF1, 0x17, 0x18, 0x19, 0x1A, 0x26, 0x27, 0x28, 0x29, 0x2A, - 0x35, 0x36, 0x37, 0x38, 0x39, 0x3A, 0x43, 0x44, - 0x45, 0x46, 0x47, 0x48, 0x49, 0x4A, 0x53, 0x54, 0x55, 0x56, - 0x57, 0x58, 0x59, 0x5A, 0x63, 0x64, 0x65, 0x66, - 0x67, 0x68, 0x69, 0x6A, 0x73, 0x74, 0x75, 0x76, 0x77, 0x78, - 0x79, 0x7A, 0x82, 0x83, 0x84, 0x85, 0x86, 0x87, - 0x88, 0x89, 0x8A, 0x92, 0x93, 0x94, 0x95, 0x96, 0x97, 0x98, - 0x99, 0x9A, 0xA2, 0xA3, 0xA4, 0xA5, 0xA6, 0xA7, - 0xA8, 0xA9, 0xAA, 0xB2, 0xB3, 0xB4, 0xB5, 0xB6, 0xB7, 0xB8, - 0xB9, 0xBA, 0xC2, 0xC3, 0xC4, 0xC5, 0xC6, 0xC7, - 0xC8, 0xC9, 0xCA, 0xD2, 0xD3, 0xD4, 0xD5, 0xD6, 0xD7, 0xD8, - 0xD9, 0xDA, 0xE2, 0xE3, 0xE4, 0xE5, 0xE6, 0xE7, - 0xE8, 0xE9, 0xEA, 0xF2, 0xF3, 0xF4, 0xF5, 0xF6, 0xF7, 0xF8, - 0xF9, 0xFA -}; - -/* jpeg baseline setup, this is just fixed in this driver (YUV pictures) */ -#define NO_OF_COMPONENTS 0x3 //Y,U,V -#define BASELINE_PRECISION 0x8 //MCU size (?) -static const char zr36060_tq[8] = { 0, 1, 1, 0, 0, 0, 0, 0 }; //table idx's QT -static const char zr36060_td[8] = { 0, 1, 1, 0, 0, 0, 0, 0 }; //table idx's DC -static const char zr36060_ta[8] = { 0, 1, 1, 0, 0, 0, 0, 0 }; //table idx's AC - -/* horizontal 422 decimation setup (maybe we support 411 or so later, too) */ -static const char zr36060_decimation_h[8] = { 2, 1, 1, 0, 0, 0, 0, 0 }; -static const char zr36060_decimation_v[8] = { 1, 1, 1, 0, 0, 0, 0, 0 }; - -/* ========================================================================= - Local helper functions: - - calculation and setup of parameter-dependent JPEG baseline segments - (needed for compression only) - ========================================================================= */ - -/* ------------------------------------------------------------------------- */ - -/* SOF (start of frame) segment depends on width, height and sampling ratio - of each color component */ - -static int -zr36060_set_sof (struct zr36060 *ptr) -{ - char sof_data[34]; // max. size of register set - int i; - - dprintk(3, "%s: write SOF (%dx%d, %d components)\n", ptr->name, - ptr->width, ptr->height, NO_OF_COMPONENTS); - sof_data[0] = 0xff; - sof_data[1] = 0xc0; - sof_data[2] = 0x00; - sof_data[3] = (3 * NO_OF_COMPONENTS) + 8; - sof_data[4] = BASELINE_PRECISION; // only '8' possible with zr36060 - sof_data[5] = (ptr->height) >> 8; - sof_data[6] = (ptr->height) & 0xff; - sof_data[7] = (ptr->width) >> 8; - sof_data[8] = (ptr->width) & 0xff; - sof_data[9] = NO_OF_COMPONENTS; - for (i = 0; i < NO_OF_COMPONENTS; i++) { - sof_data[10 + (i * 3)] = i; // index identifier - sof_data[11 + (i * 3)] = (ptr->h_samp_ratio[i] << 4) | - (ptr->v_samp_ratio[i]); // sampling ratios - sof_data[12 + (i * 3)] = zr36060_tq[i]; // Q table selection - } - return zr36060_pushit(ptr, ZR060_SOF_IDX, - (3 * NO_OF_COMPONENTS) + 10, sof_data); -} - -/* ------------------------------------------------------------------------- */ - -/* SOS (start of scan) segment depends on the used scan components - of each color component */ - -static int -zr36060_set_sos (struct zr36060 *ptr) -{ - char sos_data[16]; // max. size of register set - int i; - - dprintk(3, "%s: write SOS\n", ptr->name); - sos_data[0] = 0xff; - sos_data[1] = 0xda; - sos_data[2] = 0x00; - sos_data[3] = 2 + 1 + (2 * NO_OF_COMPONENTS) + 3; - sos_data[4] = NO_OF_COMPONENTS; - for (i = 0; i < NO_OF_COMPONENTS; i++) { - sos_data[5 + (i * 2)] = i; // index - sos_data[6 + (i * 2)] = (zr36060_td[i] << 4) | - zr36060_ta[i]; // AC/DC tbl.sel. - } - sos_data[2 + 1 + (2 * NO_OF_COMPONENTS) + 2] = 00; // scan start - sos_data[2 + 1 + (2 * NO_OF_COMPONENTS) + 3] = 0x3f; - sos_data[2 + 1 + (2 * NO_OF_COMPONENTS) + 4] = 00; - return zr36060_pushit(ptr, ZR060_SOS_IDX, - 4 + 1 + (2 * NO_OF_COMPONENTS) + 3, - sos_data); -} - -/* ------------------------------------------------------------------------- */ - -/* DRI (define restart interval) */ - -static int -zr36060_set_dri (struct zr36060 *ptr) -{ - char dri_data[6]; // max. size of register set - - dprintk(3, "%s: write DRI\n", ptr->name); - dri_data[0] = 0xff; - dri_data[1] = 0xdd; - dri_data[2] = 0x00; - dri_data[3] = 0x04; - dri_data[4] = (ptr->dri) >> 8; - dri_data[5] = (ptr->dri) & 0xff; - return zr36060_pushit(ptr, ZR060_DRI_IDX, 6, dri_data); -} - -/* ========================================================================= - Setup function: - - Setup compression/decompression of Zoran's JPEG processor - ( see also zoran 36060 manual ) - - ... sorry for the spaghetti code ... - ========================================================================= */ -static void -zr36060_init (struct zr36060 *ptr) -{ - int sum = 0; - long bitcnt, tmp; - - if (ptr->mode == CODEC_DO_COMPRESSION) { - dprintk(2, "%s: COMPRESSION SETUP\n", ptr->name); - - zr36060_write(ptr, ZR060_LOAD, ZR060_LOAD_SyncRst); - - /* 060 communicates with 067 in master mode */ - zr36060_write(ptr, ZR060_CIR, ZR060_CIR_CodeMstr); - - /* Compression with or without variable scale factor */ - /*FIXME: What about ptr->bitrate_ctrl? */ - zr36060_write(ptr, ZR060_CMR, - ZR060_CMR_Comp | ZR060_CMR_Pass2 | - ZR060_CMR_BRB); - - /* Must be zero */ - zr36060_write(ptr, ZR060_MBZ, 0x00); - zr36060_write(ptr, ZR060_TCR_HI, 0x00); - zr36060_write(ptr, ZR060_TCR_LO, 0x00); - - /* Disable all IRQs - no DataErr means autoreset */ - zr36060_write(ptr, ZR060_IMR, 0); - - /* volume control settings */ - zr36060_write(ptr, ZR060_SF_HI, ptr->scalefact >> 8); - zr36060_write(ptr, ZR060_SF_LO, ptr->scalefact & 0xff); - - zr36060_write(ptr, ZR060_AF_HI, 0xff); - zr36060_write(ptr, ZR060_AF_M, 0xff); - zr36060_write(ptr, ZR060_AF_LO, 0xff); - - /* setup the variable jpeg tables */ - sum += zr36060_set_sof(ptr); - sum += zr36060_set_sos(ptr); - sum += zr36060_set_dri(ptr); - - /* setup the fixed jpeg tables - maybe variable, though - - * (see table init section above) */ - sum += - zr36060_pushit(ptr, ZR060_DQT_IDX, sizeof(zr36060_dqt), - zr36060_dqt); - sum += - zr36060_pushit(ptr, ZR060_DHT_IDX, sizeof(zr36060_dht), - zr36060_dht); - zr36060_write(ptr, ZR060_APP_IDX, 0xff); - zr36060_write(ptr, ZR060_APP_IDX + 1, 0xe0 + ptr->app.appn); - zr36060_write(ptr, ZR060_APP_IDX + 2, 0x00); - zr36060_write(ptr, ZR060_APP_IDX + 3, ptr->app.len + 2); - sum += zr36060_pushit(ptr, ZR060_APP_IDX + 4, 60, - ptr->app.data) + 4; - zr36060_write(ptr, ZR060_COM_IDX, 0xff); - zr36060_write(ptr, ZR060_COM_IDX + 1, 0xfe); - zr36060_write(ptr, ZR060_COM_IDX + 2, 0x00); - zr36060_write(ptr, ZR060_COM_IDX + 3, ptr->com.len + 2); - sum += zr36060_pushit(ptr, ZR060_COM_IDX + 4, 60, - ptr->com.data) + 4; - - /* setup misc. data for compression (target code sizes) */ - - /* size of compressed code to reach without header data */ - sum = ptr->real_code_vol - sum; - bitcnt = sum << 3; /* need the size in bits */ - - tmp = bitcnt >> 16; - dprintk(3, - "%s: code: csize=%d, tot=%d, bit=%ld, highbits=%ld\n", - ptr->name, sum, ptr->real_code_vol, bitcnt, tmp); - zr36060_write(ptr, ZR060_TCV_NET_HI, tmp >> 8); - zr36060_write(ptr, ZR060_TCV_NET_MH, tmp & 0xff); - tmp = bitcnt & 0xffff; - zr36060_write(ptr, ZR060_TCV_NET_ML, tmp >> 8); - zr36060_write(ptr, ZR060_TCV_NET_LO, tmp & 0xff); - - bitcnt -= bitcnt >> 7; // bits without stuffing - bitcnt -= ((bitcnt * 5) >> 6); // bits without eob - - tmp = bitcnt >> 16; - dprintk(3, "%s: code: nettobit=%ld, highnettobits=%ld\n", - ptr->name, bitcnt, tmp); - zr36060_write(ptr, ZR060_TCV_DATA_HI, tmp >> 8); - zr36060_write(ptr, ZR060_TCV_DATA_MH, tmp & 0xff); - tmp = bitcnt & 0xffff; - zr36060_write(ptr, ZR060_TCV_DATA_ML, tmp >> 8); - zr36060_write(ptr, ZR060_TCV_DATA_LO, tmp & 0xff); - - /* JPEG markers to be included in the compressed stream */ - zr36060_write(ptr, ZR060_MER, - ZR060_MER_DQT | ZR060_MER_DHT | - ((ptr->com.len > 0) ? ZR060_MER_Com : 0) | - ((ptr->app.len > 0) ? ZR060_MER_App : 0)); - - /* Setup the Video Frontend */ - /* Limit pixel range to 16..235 as per CCIR-601 */ - zr36060_write(ptr, ZR060_VCR, ZR060_VCR_Range); - - } else { - dprintk(2, "%s: EXPANSION SETUP\n", ptr->name); - - zr36060_write(ptr, ZR060_LOAD, ZR060_LOAD_SyncRst); - - /* 060 communicates with 067 in master mode */ - zr36060_write(ptr, ZR060_CIR, ZR060_CIR_CodeMstr); - - /* Decompression */ - zr36060_write(ptr, ZR060_CMR, 0); - - /* Must be zero */ - zr36060_write(ptr, ZR060_MBZ, 0x00); - zr36060_write(ptr, ZR060_TCR_HI, 0x00); - zr36060_write(ptr, ZR060_TCR_LO, 0x00); - - /* Disable all IRQs - no DataErr means autoreset */ - zr36060_write(ptr, ZR060_IMR, 0); - - /* setup misc. data for expansion */ - zr36060_write(ptr, ZR060_MER, 0); - - /* setup the fixed jpeg tables - maybe variable, though - - * (see table init section above) */ - zr36060_pushit(ptr, ZR060_DHT_IDX, sizeof(zr36060_dht), - zr36060_dht); - - /* Setup the Video Frontend */ - //zr36060_write(ptr, ZR060_VCR, ZR060_VCR_FIExt); - //this doesn't seem right and doesn't work... - zr36060_write(ptr, ZR060_VCR, ZR060_VCR_Range); - } - - /* Load the tables */ - zr36060_write(ptr, ZR060_LOAD, - ZR060_LOAD_SyncRst | ZR060_LOAD_Load); - zr36060_wait_end(ptr); - dprintk(2, "%s: Status after table preload: 0x%02x\n", ptr->name, - ptr->status); - - if (ptr->status & ZR060_CFSR_Busy) { - dprintk(1, KERN_ERR "%s: init aborted!\n", ptr->name); - return; // something is wrong, its timed out!!!! - } -} - -/* ========================================================================= - CODEC API FUNCTIONS - - this functions are accessed by the master via the API structure - ========================================================================= */ - -/* set compression/expansion mode and launches codec - - this should be the last call from the master before starting processing */ -static int -zr36060_set_mode (struct videocodec *codec, - int mode) -{ - struct zr36060 *ptr = (struct zr36060 *) codec->data; - - dprintk(2, "%s: set_mode %d call\n", ptr->name, mode); - - if ((mode != CODEC_DO_EXPANSION) && (mode != CODEC_DO_COMPRESSION)) - return -EINVAL; - - ptr->mode = mode; - zr36060_init(ptr); - - return 0; -} - -/* set picture size (norm is ignored as the codec doesn't know about it) */ -static int -zr36060_set_video (struct videocodec *codec, - struct tvnorm *norm, - struct vfe_settings *cap, - struct vfe_polarity *pol) -{ - struct zr36060 *ptr = (struct zr36060 *) codec->data; - u32 reg; - int size; - - dprintk(2, "%s: set_video %d/%d-%dx%d (%%%d) call\n", ptr->name, - cap->x, cap->y, cap->width, cap->height, cap->decimation); - - /* if () return -EINVAL; - * trust the master driver that it knows what it does - so - * we allow invalid startx/y and norm for now ... */ - ptr->width = cap->width / (cap->decimation & 0xff); - ptr->height = cap->height / (cap->decimation >> 8); - - zr36060_write(ptr, ZR060_LOAD, ZR060_LOAD_SyncRst); - - /* Note that VSPol/HSPol bits in zr36060 have the opposite - * meaning of their zr360x7 counterparts with the same names - * N.b. for VSPol this is only true if FIVEdge = 0 (default, - * left unchanged here - in accordance with datasheet). - */ - reg = (!pol->vsync_pol ? ZR060_VPR_VSPol : 0) - | (!pol->hsync_pol ? ZR060_VPR_HSPol : 0) - | (pol->field_pol ? ZR060_VPR_FIPol : 0) - | (pol->blank_pol ? ZR060_VPR_BLPol : 0) - | (pol->subimg_pol ? ZR060_VPR_SImgPol : 0) - | (pol->poe_pol ? ZR060_VPR_PoePol : 0) - | (pol->pvalid_pol ? ZR060_VPR_PValPol : 0) - | (pol->vclk_pol ? ZR060_VPR_VCLKPol : 0); - zr36060_write(ptr, ZR060_VPR, reg); - - reg = 0; - switch (cap->decimation & 0xff) { - default: - case 1: - break; - - case 2: - reg |= ZR060_SR_HScale2; - break; - - case 4: - reg |= ZR060_SR_HScale4; - break; - } - - switch (cap->decimation >> 8) { - default: - case 1: - break; - - case 2: - reg |= ZR060_SR_VScale; - break; - } - zr36060_write(ptr, ZR060_SR, reg); - - zr36060_write(ptr, ZR060_BCR_Y, 0x00); - zr36060_write(ptr, ZR060_BCR_U, 0x80); - zr36060_write(ptr, ZR060_BCR_V, 0x80); - - /* sync generator */ - - reg = norm->Ht - 1; /* Vtotal */ - zr36060_write(ptr, ZR060_SGR_VTOTAL_HI, (reg >> 8) & 0xff); - zr36060_write(ptr, ZR060_SGR_VTOTAL_LO, (reg >> 0) & 0xff); - - reg = norm->Wt - 1; /* Htotal */ - zr36060_write(ptr, ZR060_SGR_HTOTAL_HI, (reg >> 8) & 0xff); - zr36060_write(ptr, ZR060_SGR_HTOTAL_LO, (reg >> 0) & 0xff); - - reg = 6 - 1; /* VsyncSize */ - zr36060_write(ptr, ZR060_SGR_VSYNC, reg); - - //reg = 30 - 1; /* HsyncSize */ -///*CP*/ reg = (zr->params.norm == 1 ? 57 : 68); - reg = 68; - zr36060_write(ptr, ZR060_SGR_HSYNC, reg); - - reg = norm->VStart - 1; /* BVstart */ - zr36060_write(ptr, ZR060_SGR_BVSTART, reg); - - reg += norm->Ha / 2; /* BVend */ - zr36060_write(ptr, ZR060_SGR_BVEND_HI, (reg >> 8) & 0xff); - zr36060_write(ptr, ZR060_SGR_BVEND_LO, (reg >> 0) & 0xff); - - reg = norm->HStart - 1; /* BHstart */ - zr36060_write(ptr, ZR060_SGR_BHSTART, reg); - - reg += norm->Wa; /* BHend */ - zr36060_write(ptr, ZR060_SGR_BHEND_HI, (reg >> 8) & 0xff); - zr36060_write(ptr, ZR060_SGR_BHEND_LO, (reg >> 0) & 0xff); - - /* active area */ - reg = cap->y + norm->VStart; /* Vstart */ - zr36060_write(ptr, ZR060_AAR_VSTART_HI, (reg >> 8) & 0xff); - zr36060_write(ptr, ZR060_AAR_VSTART_LO, (reg >> 0) & 0xff); - - reg += cap->height; /* Vend */ - zr36060_write(ptr, ZR060_AAR_VEND_HI, (reg >> 8) & 0xff); - zr36060_write(ptr, ZR060_AAR_VEND_LO, (reg >> 0) & 0xff); - - reg = cap->x + norm->HStart; /* Hstart */ - zr36060_write(ptr, ZR060_AAR_HSTART_HI, (reg >> 8) & 0xff); - zr36060_write(ptr, ZR060_AAR_HSTART_LO, (reg >> 0) & 0xff); - - reg += cap->width; /* Hend */ - zr36060_write(ptr, ZR060_AAR_HEND_HI, (reg >> 8) & 0xff); - zr36060_write(ptr, ZR060_AAR_HEND_LO, (reg >> 0) & 0xff); - - /* subimage area */ - reg = norm->VStart - 4; /* SVstart */ - zr36060_write(ptr, ZR060_SWR_VSTART_HI, (reg >> 8) & 0xff); - zr36060_write(ptr, ZR060_SWR_VSTART_LO, (reg >> 0) & 0xff); - - reg += norm->Ha / 2 + 8; /* SVend */ - zr36060_write(ptr, ZR060_SWR_VEND_HI, (reg >> 8) & 0xff); - zr36060_write(ptr, ZR060_SWR_VEND_LO, (reg >> 0) & 0xff); - - reg = norm->HStart /*+ 64 */ - 4; /* SHstart */ - zr36060_write(ptr, ZR060_SWR_HSTART_HI, (reg >> 8) & 0xff); - zr36060_write(ptr, ZR060_SWR_HSTART_LO, (reg >> 0) & 0xff); - - reg += norm->Wa + 8; /* SHend */ - zr36060_write(ptr, ZR060_SWR_HEND_HI, (reg >> 8) & 0xff); - zr36060_write(ptr, ZR060_SWR_HEND_LO, (reg >> 0) & 0xff); - - size = ptr->width * ptr->height; - /* Target compressed field size in bits: */ - size = size * 16; /* uncompressed size in bits */ - /* (Ronald) by default, quality = 100 is a compression - * ratio 1:2. Setting low_bitrate (insmod option) sets - * it to 1:4 (instead of 1:2, zr36060 max) as limit because the - * buz can't handle more at decimation=1... Use low_bitrate if - * you have a Buz, unless you know what you're doing */ - size = size * cap->quality / (low_bitrate ? 400 : 200); - /* Lower limit (arbitrary, 1 KB) */ - if (size < 8192) - size = 8192; - /* Upper limit: 7/8 of the code buffers */ - if (size > ptr->total_code_vol * 7) - size = ptr->total_code_vol * 7; - - ptr->real_code_vol = size >> 3; /* in bytes */ - - /* the MBCVR is the *maximum* block volume, according to the - * JPEG ISO specs, this shouldn't be used, since that allows - * for the best encoding quality. So set it to it's max value */ - reg = ptr->max_block_vol; - zr36060_write(ptr, ZR060_MBCVR, reg); - - return 0; -} - -/* additional control functions */ -static int -zr36060_control (struct videocodec *codec, - int type, - int size, - void *data) -{ - struct zr36060 *ptr = (struct zr36060 *) codec->data; - int *ival = (int *) data; - - dprintk(2, "%s: control %d call with %d byte\n", ptr->name, type, - size); - - switch (type) { - case CODEC_G_STATUS: /* get last status */ - if (size != sizeof(int)) - return -EFAULT; - zr36060_read_status(ptr); - *ival = ptr->status; - break; - - case CODEC_G_CODEC_MODE: - if (size != sizeof(int)) - return -EFAULT; - *ival = CODEC_MODE_BJPG; - break; - - case CODEC_S_CODEC_MODE: - if (size != sizeof(int)) - return -EFAULT; - if (*ival != CODEC_MODE_BJPG) - return -EINVAL; - /* not needed, do nothing */ - return 0; - - case CODEC_G_VFE: - case CODEC_S_VFE: - /* not needed, do nothing */ - return 0; - - case CODEC_S_MMAP: - /* not available, give an error */ - return -ENXIO; - - case CODEC_G_JPEG_TDS_BYTE: /* get target volume in byte */ - if (size != sizeof(int)) - return -EFAULT; - *ival = ptr->total_code_vol; - break; - - case CODEC_S_JPEG_TDS_BYTE: /* get target volume in byte */ - if (size != sizeof(int)) - return -EFAULT; - ptr->total_code_vol = *ival; - ptr->real_code_vol = (ptr->total_code_vol * 6) >> 3; - break; - - case CODEC_G_JPEG_SCALE: /* get scaling factor */ - if (size != sizeof(int)) - return -EFAULT; - *ival = zr36060_read_scalefactor(ptr); - break; - - case CODEC_S_JPEG_SCALE: /* set scaling factor */ - if (size != sizeof(int)) - return -EFAULT; - ptr->scalefact = *ival; - break; - - case CODEC_G_JPEG_APP_DATA: { /* get appn marker data */ - struct jpeg_app_marker *app = data; - - if (size != sizeof(struct jpeg_app_marker)) - return -EFAULT; - - *app = ptr->app; - break; - } - - case CODEC_S_JPEG_APP_DATA: { /* set appn marker data */ - struct jpeg_app_marker *app = data; - - if (size != sizeof(struct jpeg_app_marker)) - return -EFAULT; - - ptr->app = *app; - break; - } - - case CODEC_G_JPEG_COM_DATA: { /* get comment marker data */ - struct jpeg_com_marker *com = data; - - if (size != sizeof(struct jpeg_com_marker)) - return -EFAULT; - - *com = ptr->com; - break; - } - - case CODEC_S_JPEG_COM_DATA: { /* set comment marker data */ - struct jpeg_com_marker *com = data; - - if (size != sizeof(struct jpeg_com_marker)) - return -EFAULT; - - ptr->com = *com; - break; - } - - default: - return -EINVAL; - } - - return size; -} - -/* ========================================================================= - Exit and unregister function: - - Deinitializes Zoran's JPEG processor - ========================================================================= */ - -static int -zr36060_unset (struct videocodec *codec) -{ - struct zr36060 *ptr = codec->data; - - if (ptr) { - /* do wee need some codec deinit here, too ???? */ - - dprintk(1, "%s: finished codec #%d\n", ptr->name, - ptr->num); - kfree(ptr); - codec->data = NULL; - - zr36060_codecs--; - return 0; - } - - return -EFAULT; -} - -/* ========================================================================= - Setup and registry function: - - Initializes Zoran's JPEG processor - - Also sets pixel size, average code size, mode (compr./decompr.) - (the given size is determined by the processor with the video interface) - ========================================================================= */ - -static int -zr36060_setup (struct videocodec *codec) -{ - struct zr36060 *ptr; - int res; - - dprintk(2, "zr36060: initializing MJPEG subsystem #%d.\n", - zr36060_codecs); - - if (zr36060_codecs == MAX_CODECS) { - dprintk(1, - KERN_ERR "zr36060: Can't attach more codecs!\n"); - return -ENOSPC; - } - //mem structure init - codec->data = ptr = kzalloc(sizeof(struct zr36060), GFP_KERNEL); - if (NULL == ptr) { - dprintk(1, KERN_ERR "zr36060: Can't get enough memory!\n"); - return -ENOMEM; - } - - snprintf(ptr->name, sizeof(ptr->name), "zr36060[%d]", - zr36060_codecs); - ptr->num = zr36060_codecs++; - ptr->codec = codec; - - //testing - res = zr36060_basic_test(ptr); - if (res < 0) { - zr36060_unset(codec); - return res; - } - //final setup - memcpy(ptr->h_samp_ratio, zr36060_decimation_h, 8); - memcpy(ptr->v_samp_ratio, zr36060_decimation_v, 8); - - ptr->bitrate_ctrl = 0; /* 0 or 1 - fixed file size flag - * (what is the difference?) */ - ptr->mode = CODEC_DO_COMPRESSION; - ptr->width = 384; - ptr->height = 288; - ptr->total_code_vol = 16000; /* CHECKME */ - ptr->real_code_vol = (ptr->total_code_vol * 6) >> 3; - ptr->max_block_vol = 240; /* CHECKME, was 120 is 240 */ - ptr->scalefact = 0x100; - ptr->dri = 1; /* CHECKME, was 8 is 1 */ - - /* by default, no COM or APP markers - app should set those */ - ptr->com.len = 0; - ptr->app.appn = 0; - ptr->app.len = 0; - - zr36060_init(ptr); - - dprintk(1, KERN_INFO "%s: codec attached and running\n", - ptr->name); - - return 0; -} - -static const struct videocodec zr36060_codec = { - .owner = THIS_MODULE, - .name = "zr36060", - .magic = 0L, // magic not used - .flags = - CODEC_FLAG_JPEG | CODEC_FLAG_HARDWARE | CODEC_FLAG_ENCODER | - CODEC_FLAG_DECODER | CODEC_FLAG_VFE, - .type = CODEC_TYPE_ZR36060, - .setup = zr36060_setup, // functionality - .unset = zr36060_unset, - .set_mode = zr36060_set_mode, - .set_video = zr36060_set_video, - .control = zr36060_control, - // others are not used -}; - -/* ========================================================================= - HOOK IN DRIVER AS KERNEL MODULE - ========================================================================= */ - -static int __init -zr36060_init_module (void) -{ - //dprintk(1, "zr36060 driver %s\n",ZR060_VERSION); - zr36060_codecs = 0; - return videocodec_register(&zr36060_codec); -} - -static void __exit -zr36060_cleanup_module (void) -{ - if (zr36060_codecs) { - dprintk(1, - "zr36060: something's wrong - %d codecs left somehow.\n", - zr36060_codecs); - } - - /* however, we can't just stay alive */ - videocodec_unregister(&zr36060_codec); -} - -module_init(zr36060_init_module); -module_exit(zr36060_cleanup_module); - -MODULE_AUTHOR("Laurent Pinchart "); -MODULE_DESCRIPTION("Driver module for ZR36060 jpeg processors " - ZR060_VERSION); -MODULE_LICENSE("GPL"); diff --git a/drivers/media/video/zr36060.h b/drivers/media/video/zr36060.h deleted file mode 100644 index 914ffa4..0000000 --- a/drivers/media/video/zr36060.h +++ /dev/null @@ -1,220 +0,0 @@ -/* - * Zoran ZR36060 basic configuration functions - header file - * - * Copyright (C) 2002 Laurent Pinchart - * - * $Id: zr36060.h,v 1.1.1.1.2.3 2003/01/14 21:18:47 rbultje Exp $ - * - * ------------------------------------------------------------------------ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - * - * ------------------------------------------------------------------------ - */ - -#ifndef ZR36060_H -#define ZR36060_H - -#include "videocodec.h" - -/* data stored for each zoran jpeg codec chip */ -struct zr36060 { - char name[32]; - int num; - /* io datastructure */ - struct videocodec *codec; - // last coder status - __u8 status; - // actual coder setup - int mode; - - __u16 width; - __u16 height; - - __u16 bitrate_ctrl; - - __u32 total_code_vol; - __u32 real_code_vol; - __u16 max_block_vol; - - __u8 h_samp_ratio[8]; - __u8 v_samp_ratio[8]; - __u16 scalefact; - __u16 dri; - - /* app/com marker data */ - struct jpeg_app_marker app; - struct jpeg_com_marker com; -}; - -/* ZR36060 register addresses */ -#define ZR060_LOAD 0x000 -#define ZR060_CFSR 0x001 -#define ZR060_CIR 0x002 -#define ZR060_CMR 0x003 -#define ZR060_MBZ 0x004 -#define ZR060_MBCVR 0x005 -#define ZR060_MER 0x006 -#define ZR060_IMR 0x007 -#define ZR060_ISR 0x008 -#define ZR060_TCV_NET_HI 0x009 -#define ZR060_TCV_NET_MH 0x00a -#define ZR060_TCV_NET_ML 0x00b -#define ZR060_TCV_NET_LO 0x00c -#define ZR060_TCV_DATA_HI 0x00d -#define ZR060_TCV_DATA_MH 0x00e -#define ZR060_TCV_DATA_ML 0x00f -#define ZR060_TCV_DATA_LO 0x010 -#define ZR060_SF_HI 0x011 -#define ZR060_SF_LO 0x012 -#define ZR060_AF_HI 0x013 -#define ZR060_AF_M 0x014 -#define ZR060_AF_LO 0x015 -#define ZR060_ACV_HI 0x016 -#define ZR060_ACV_MH 0x017 -#define ZR060_ACV_ML 0x018 -#define ZR060_ACV_LO 0x019 -#define ZR060_ACT_HI 0x01a -#define ZR060_ACT_MH 0x01b -#define ZR060_ACT_ML 0x01c -#define ZR060_ACT_LO 0x01d -#define ZR060_ACV_TRUN_HI 0x01e -#define ZR060_ACV_TRUN_MH 0x01f -#define ZR060_ACV_TRUN_ML 0x020 -#define ZR060_ACV_TRUN_LO 0x021 -#define ZR060_IDR_DEV 0x022 -#define ZR060_IDR_REV 0x023 -#define ZR060_TCR_HI 0x024 -#define ZR060_TCR_LO 0x025 -#define ZR060_VCR 0x030 -#define ZR060_VPR 0x031 -#define ZR060_SR 0x032 -#define ZR060_BCR_Y 0x033 -#define ZR060_BCR_U 0x034 -#define ZR060_BCR_V 0x035 -#define ZR060_SGR_VTOTAL_HI 0x036 -#define ZR060_SGR_VTOTAL_LO 0x037 -#define ZR060_SGR_HTOTAL_HI 0x038 -#define ZR060_SGR_HTOTAL_LO 0x039 -#define ZR060_SGR_VSYNC 0x03a -#define ZR060_SGR_HSYNC 0x03b -#define ZR060_SGR_BVSTART 0x03c -#define ZR060_SGR_BHSTART 0x03d -#define ZR060_SGR_BVEND_HI 0x03e -#define ZR060_SGR_BVEND_LO 0x03f -#define ZR060_SGR_BHEND_HI 0x040 -#define ZR060_SGR_BHEND_LO 0x041 -#define ZR060_AAR_VSTART_HI 0x042 -#define ZR060_AAR_VSTART_LO 0x043 -#define ZR060_AAR_VEND_HI 0x044 -#define ZR060_AAR_VEND_LO 0x045 -#define ZR060_AAR_HSTART_HI 0x046 -#define ZR060_AAR_HSTART_LO 0x047 -#define ZR060_AAR_HEND_HI 0x048 -#define ZR060_AAR_HEND_LO 0x049 -#define ZR060_SWR_VSTART_HI 0x04a -#define ZR060_SWR_VSTART_LO 0x04b -#define ZR060_SWR_VEND_HI 0x04c -#define ZR060_SWR_VEND_LO 0x04d -#define ZR060_SWR_HSTART_HI 0x04e -#define ZR060_SWR_HSTART_LO 0x04f -#define ZR060_SWR_HEND_HI 0x050 -#define ZR060_SWR_HEND_LO 0x051 - -#define ZR060_SOF_IDX 0x060 -#define ZR060_SOS_IDX 0x07a -#define ZR060_DRI_IDX 0x0c0 -#define ZR060_DQT_IDX 0x0cc -#define ZR060_DHT_IDX 0x1d4 -#define ZR060_APP_IDX 0x380 -#define ZR060_COM_IDX 0x3c0 - -/* ZR36060 LOAD register bits */ - -#define ZR060_LOAD_Load (1 << 7) -#define ZR060_LOAD_SyncRst (1 << 0) - -/* ZR36060 Code FIFO Status register bits */ - -#define ZR060_CFSR_Busy (1 << 7) -#define ZR060_CFSR_CBusy (1 << 2) -#define ZR060_CFSR_CFIFO (3 << 0) - -/* ZR36060 Code Interface register */ - -#define ZR060_CIR_Code16 (1 << 7) -#define ZR060_CIR_Endian (1 << 6) -#define ZR060_CIR_CFIS (1 << 2) -#define ZR060_CIR_CodeMstr (1 << 0) - -/* ZR36060 Codec Mode register */ - -#define ZR060_CMR_Comp (1 << 7) -#define ZR060_CMR_ATP (1 << 6) -#define ZR060_CMR_Pass2 (1 << 5) -#define ZR060_CMR_TLM (1 << 4) -#define ZR060_CMR_BRB (1 << 2) -#define ZR060_CMR_FSF (1 << 1) - -/* ZR36060 Markers Enable register */ - -#define ZR060_MER_App (1 << 7) -#define ZR060_MER_Com (1 << 6) -#define ZR060_MER_DRI (1 << 5) -#define ZR060_MER_DQT (1 << 4) -#define ZR060_MER_DHT (1 << 3) - -/* ZR36060 Interrupt Mask register */ - -#define ZR060_IMR_EOAV (1 << 3) -#define ZR060_IMR_EOI (1 << 2) -#define ZR060_IMR_End (1 << 1) -#define ZR060_IMR_DataErr (1 << 0) - -/* ZR36060 Interrupt Status register */ - -#define ZR060_ISR_ProCnt (3 << 6) -#define ZR060_ISR_EOAV (1 << 3) -#define ZR060_ISR_EOI (1 << 2) -#define ZR060_ISR_End (1 << 1) -#define ZR060_ISR_DataErr (1 << 0) - -/* ZR36060 Video Control register */ - -#define ZR060_VCR_Video8 (1 << 7) -#define ZR060_VCR_Range (1 << 6) -#define ZR060_VCR_FIDet (1 << 3) -#define ZR060_VCR_FIVedge (1 << 2) -#define ZR060_VCR_FIExt (1 << 1) -#define ZR060_VCR_SyncMstr (1 << 0) - -/* ZR36060 Video Polarity register */ - -#define ZR060_VPR_VCLKPol (1 << 7) -#define ZR060_VPR_PValPol (1 << 6) -#define ZR060_VPR_PoePol (1 << 5) -#define ZR060_VPR_SImgPol (1 << 4) -#define ZR060_VPR_BLPol (1 << 3) -#define ZR060_VPR_FIPol (1 << 2) -#define ZR060_VPR_HSPol (1 << 1) -#define ZR060_VPR_VSPol (1 << 0) - -/* ZR36060 Scaling register */ - -#define ZR060_SR_VScale (1 << 2) -#define ZR060_SR_HScale2 (1 << 0) -#define ZR060_SR_HScale4 (2 << 0) - -#endif /*fndef ZR36060_H */ -- cgit v0.10.2 From e613f8fa5432d4cacaf81615f62b6d25d77947c5 Mon Sep 17 00:00:00 2001 From: Antti Palosaari Date: Mon, 11 Aug 2008 10:36:43 -0300 Subject: V4L/DVB (9140): anysee: unlock I2C-mutex in error case - unlock I2C-mutex also in error case Signed-off-by: Antti Palosaari Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/dvb/dvb-usb/anysee.c b/drivers/media/dvb/dvb-usb/anysee.c index 2f408d2..f511d10 100644 --- a/drivers/media/dvb/dvb-usb/anysee.c +++ b/drivers/media/dvb/dvb-usb/anysee.c @@ -178,14 +178,14 @@ static int anysee_master_xfer(struct i2c_adapter *adap, struct i2c_msg *msg, inc = 1; } if (ret) - return ret; + break; i += inc; } mutex_unlock(&d->i2c_mutex); - return i; + return ret ? ret : i; } static u32 anysee_i2c_func(struct i2c_adapter *adapter) -- cgit v0.10.2 From 0f77c3a4880f33127bc8d593e0e466f004a4adde Mon Sep 17 00:00:00 2001 From: Antti Palosaari Date: Mon, 11 Aug 2008 10:54:16 -0300 Subject: V4L/DVB (9141): anysee: support for Anysee E30 Combo Plus - add module parameter for selecting DVB-T / DVB-C mode Signed-off-by: Antti Palosaari Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/dvb/dvb-usb/anysee.c b/drivers/media/dvb/dvb-usb/anysee.c index f511d10..c786359 100644 --- a/drivers/media/dvb/dvb-usb/anysee.c +++ b/drivers/media/dvb/dvb-usb/anysee.c @@ -41,6 +41,9 @@ static int dvb_usb_anysee_debug; module_param_named(debug, dvb_usb_anysee_debug, int, 0644); MODULE_PARM_DESC(debug, "set debugging level" DVB_USB_DEBUG_STATUS); +int dvb_usb_anysee_delsys; +module_param_named(delsys, dvb_usb_anysee_delsys, int, 0644); +MODULE_PARM_DESC(delsys, "select delivery mode (0=DVB-C, 1=DVB-T)"); DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); static struct mutex anysee_usb_mutex; @@ -272,9 +275,11 @@ static int anysee_frontend_attach(struct dvb_usb_adapter *adap) model demod hw firmware 1. E30 MT352 02 0.2.1 2. E30 ZL10353 02 0.2.1 - 3. E30 Plus ZL10353 06 0.1.0 - 4. E30C Plus TDA10023 0a 0.1.0 rev 0.2 - 4. E30C Plus TDA10023 0f 0.1.2 rev 0.4 + 3. E30 Combo ZL10353 0f 0.1.2 DVB-T/C combo + 4. E30 Plus ZL10353 06 0.1.0 + 5. E30C Plus TDA10023 0a 0.1.0 rev 0.2 + E30C Plus TDA10023 0f 0.1.2 rev 0.4 + E30 Combo TDA10023 0f 0.1.2 DVB-T/C combo */ /* Zarlink MT352 DVB-T demod inside of Samsung DNOS404ZH102A NIM */ @@ -293,6 +298,21 @@ static int anysee_frontend_attach(struct dvb_usb_adapter *adap) return 0; } + /* for E30 Combo Plus DVB-T demodulator */ + if (dvb_usb_anysee_delsys) { + ret = anysee_write_reg(adap->dev, 0xb0, 0x01); + if (ret) + return ret; + + /* Zarlink ZL10353 DVB-T demod */ + adap->fe = dvb_attach(zl10353_attach, &anysee_zl10353_config, + &adap->dev->i2c_adap); + if (adap->fe != NULL) { + state->tuner = DVB_PLL_SAMSUNG_DTOS403IH102A; + return 0; + } + } + /* connect demod on IO port D for TDA10023 & ZL10353 */ ret = anysee_write_reg(adap->dev, 0xb0, 0x25); if (ret) -- cgit v0.10.2 From 2dcd4e4766697f3d15284c48d2ef5192bf58131e Mon Sep 17 00:00:00 2001 From: Antti Palosaari Date: Mon, 22 Sep 2008 13:48:26 -0300 Subject: V4L/DVB (9143): af9015: fix wrong GPIO - fix wrong GPIO that causes 2nd FE not to work ater warmboot Thanks to Andrew Williams for reporting this. Signed-off-by: Antti Palosaari Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/dvb/dvb-usb/af9015.c b/drivers/media/dvb/dvb-usb/af9015.c index 3f6217b..87752ca 100644 --- a/drivers/media/dvb/dvb-usb/af9015.c +++ b/drivers/media/dvb/dvb-usb/af9015.c @@ -54,7 +54,6 @@ static struct af9013_config af9015_af9013_config[] = { .output_mode = AF9013_OUTPUT_MODE_USB, .api_version = { 0, 1, 9, 0 }, .gpio[0] = AF9013_GPIO_HI, - .gpio[1] = AF9013_GPIO_LO, .gpio[3] = AF9013_GPIO_TUNER_ON, }, { -- cgit v0.10.2 From a131077d57d0c52d0d481cb7c588752d0a211aa5 Mon Sep 17 00:00:00 2001 From: Antti Palosaari Date: Mon, 22 Sep 2008 13:59:25 -0300 Subject: V4L/DVB (9144): af9015: enable Maxlinear mxl5005s tuner RSSI - enable Maxlinear mxl5005s tuner RSSI Thaks to Jose Alberto for finding this setting. Thanks-to: Jose Alberto Reguero Signed-off-by: Antti Palosaari Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/dvb/dvb-usb/af9015.c b/drivers/media/dvb/dvb-usb/af9015.c index 87752ca..1168e4b 100644 --- a/drivers/media/dvb/dvb-usb/af9015.c +++ b/drivers/media/dvb/dvb-usb/af9015.c @@ -1088,7 +1088,7 @@ static struct mxl5005s_config af9015_mxl5003_config = { .xtal_freq = CRYSTAL_FREQ_16000000HZ, .agc_mode = MXL_SINGLE_AGC, .tracking_filter = MXL_TF_DEFAULT, - .rssi_enable = MXL_RSSI_DISABLE, + .rssi_enable = MXL_RSSI_ENABLE, .cap_select = MXL_CAP_SEL_ENABLE, .div_out = MXL_DIV_OUT_4, .clock_out = MXL_CLOCK_OUT_DISABLE, @@ -1105,7 +1105,7 @@ static struct mxl5005s_config af9015_mxl5005_config = { .xtal_freq = CRYSTAL_FREQ_16000000HZ, .agc_mode = MXL_SINGLE_AGC, .tracking_filter = MXL_TF_OFF, - .rssi_enable = MXL_RSSI_DISABLE, + .rssi_enable = MXL_RSSI_ENABLE, .cap_select = MXL_CAP_SEL_ENABLE, .div_out = MXL_DIV_OUT_4, .clock_out = MXL_CLOCK_OUT_DISABLE, -- cgit v0.10.2 From d4e80beae1eef31df5749516ecb36f0fb366daf1 Mon Sep 17 00:00:00 2001 From: Antti Palosaari Date: Fri, 26 Sep 2008 11:40:53 -0300 Subject: V4L/DVB (9145): af901x: clean-up - remove unnecessary #undef's Signed-off-by: Antti Palosaari Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/dvb/dvb-usb/af9015.c b/drivers/media/dvb/dvb-usb/af9015.c index 1168e4b..8c183e5 100644 --- a/drivers/media/dvb/dvb-usb/af9015.c +++ b/drivers/media/dvb/dvb-usb/af9015.c @@ -672,7 +672,6 @@ static int af9015_download_firmware(struct usb_device *udev, goto error; } } - #undef FW_PACKET_MAX_DATA /* firmware loaded, request boot */ req.cmd = BOOT; @@ -1377,7 +1376,6 @@ static struct dvb_usb_device_properties af9015_properties[] = { } } }; -#undef AF9015_DEFAULT_PROPERTIES static int af9015_usb_probe(struct usb_interface *intf, const struct usb_device_id *id) diff --git a/drivers/media/dvb/frontends/af9013.c b/drivers/media/dvb/frontends/af9013.c index 50e1e3f..0d2a0ad 100644 --- a/drivers/media/dvb/frontends/af9013.c +++ b/drivers/media/dvb/frontends/af9013.c @@ -1500,8 +1500,6 @@ static int af9013_download_firmware(struct af9013_state *state) } } - #undef FW_PACKET_MAX_DATA - /* request boot firmware */ ret = af9013_write_reg(state, 0xe205, 1); if (ret) -- cgit v0.10.2 From 541dfa87f9285b2ff7e703a5eab81ad821de7f6e Mon Sep 17 00:00:00 2001 From: Antti Palosaari Date: Mon, 6 Oct 2008 13:57:45 -0300 Subject: V4L/DVB (9146): af901x: fix some compiler errors and warnings - cast firmware data to u8 - remove cpu_to_le16 from switch-case label Signed-off-by: Antti Palosaari Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/dvb/dvb-usb/af9015.c b/drivers/media/dvb/dvb-usb/af9015.c index 8c183e5..67b1306 100644 --- a/drivers/media/dvb/dvb-usb/af9015.c +++ b/drivers/media/dvb/dvb-usb/af9015.c @@ -661,7 +661,7 @@ static int af9015_download_firmware(struct usb_device *udev, len = remainder; req.data_len = len; - req.data = (fw->data + i * FW_PACKET_MAX_DATA); + req.data = (u8 *)(fw->data + i * FW_PACKET_MAX_DATA); req.addr = addr; addr += FW_PACKET_MAX_DATA; @@ -742,7 +742,7 @@ static int af9015_read_config(struct usb_device *udev) } } else { switch (udev->descriptor.idVendor) { - case cpu_to_le16(USB_VID_LEADTEK): + case USB_VID_LEADTEK: af9015_properties[i].rc_key_map = af9015_rc_keys_leadtek; af9015_properties[i].rc_key_map_size = @@ -752,9 +752,9 @@ static int af9015_read_config(struct usb_device *udev) af9015_config.ir_table_size = ARRAY_SIZE(af9015_ir_table_leadtek); break; - case cpu_to_le16(USB_VID_VISIONPLUS): + case USB_VID_VISIONPLUS: if (udev->descriptor.idProduct == - cpu_to_le16(USB_PID_AZUREWAVE_AD_TU700)) { + USB_PID_AZUREWAVE_AD_TU700) { af9015_properties[i].rc_key_map = af9015_rc_keys_twinhan; af9015_properties[i].rc_key_map_size = @@ -765,7 +765,7 @@ static int af9015_read_config(struct usb_device *udev) ARRAY_SIZE(af9015_ir_table_twinhan); } break; - case cpu_to_le16(USB_VID_KWORLD_2): + case USB_VID_KWORLD_2: /* TODO: use correct rc keys */ af9015_properties[i].rc_key_map = af9015_rc_keys_twinhan; @@ -778,7 +778,7 @@ static int af9015_read_config(struct usb_device *udev) /* Check USB manufacturer and product strings and try to determine correct remote in case of chip vendor reference IDs are used. */ - case cpu_to_le16(USB_VID_AFATECH): + case USB_VID_AFATECH: memset(manufacturer, 0, sizeof(manufacturer)); usb_string(udev, udev->descriptor.iManufacturer, manufacturer, sizeof(manufacturer)); diff --git a/drivers/media/dvb/frontends/af9013.c b/drivers/media/dvb/frontends/af9013.c index 0d2a0ad..21c1060 100644 --- a/drivers/media/dvb/frontends/af9013.c +++ b/drivers/media/dvb/frontends/af9013.c @@ -1490,7 +1490,7 @@ static int af9013_download_firmware(struct af9013_state *state) if (i == packets) /* set size of the last packet */ len = remainder; - data = (fw->data + i * FW_PACKET_MAX_DATA); + data = (u8 *)(fw->data + i * FW_PACKET_MAX_DATA); ret = af9013_write_ofsm_regs(state, addr, data, len); addr += FW_PACKET_MAX_DATA; -- cgit v0.10.2 From 641015ab2c452e8e554625e2a8e95218182acb4b Mon Sep 17 00:00:00 2001 From: Herbert Graeber Date: Tue, 7 Oct 2008 10:06:36 -0300 Subject: V4L/DVB (9147): af9015: Add USB ID for MSI DIGIVOX mini III - Add USB ID for MSI DIGIVOX mini III (1462:8807) Signed-off-by: Herbert Graeber Signed-off-by: Antti Palosaari Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/dvb/dvb-usb/af9015.c b/drivers/media/dvb/dvb-usb/af9015.c index 67b1306..cb0829c 100644 --- a/drivers/media/dvb/dvb-usb/af9015.c +++ b/drivers/media/dvb/dvb-usb/af9015.c @@ -1196,6 +1196,7 @@ static struct usb_device_id af9015_usb_table[] = { {USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_VOLAR_X_2)}, {USB_DEVICE(USB_VID_TELESTAR, USB_PID_TELESTAR_STARSTICK_2)}, {USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_A309)}, +/* 15 */{USB_DEVICE(USB_VID_MSI_2, USB_PID_MSI_DIGI_VOX_MINI_III)}, {0}, }; MODULE_DEVICE_TABLE(usb, af9015_usb_table); @@ -1346,7 +1347,7 @@ static struct dvb_usb_device_properties af9015_properties[] = { .i2c_algo = &af9015_i2c_algo, - .num_device_descs = 5, + .num_device_descs = 6, .devices = { { .name = "Xtensions XD-380", @@ -1373,6 +1374,11 @@ static struct dvb_usb_device_properties af9015_properties[] = { .cold_ids = {&af9015_usb_table[14], NULL}, .warm_ids = {NULL}, }, + { + .name = "MSI Digi VOX mini III", + .cold_ids = {&af9015_usb_table[15], NULL}, + .warm_ids = {NULL}, + }, } } }; diff --git a/drivers/media/dvb/dvb-usb/dvb-usb-ids.h b/drivers/media/dvb/dvb-usb/dvb-usb-ids.h index dfaf1d2..7380b94 100644 --- a/drivers/media/dvb/dvb-usb/dvb-usb-ids.h +++ b/drivers/media/dvb/dvb-usb/dvb-usb-ids.h @@ -232,5 +232,6 @@ #define USB_PID_DW2102 0x2102 #define USB_PID_XTENSIONS_XD_380 0x0381 #define USB_PID_TELESTAR_STARSTICK_2 0x8000 +#define USB_PID_MSI_DIGI_VOX_MINI_III 0x8807 #endif -- cgit v0.10.2 From adeeac3b7989ad9f03651e9224c9c63e221d4310 Mon Sep 17 00:00:00 2001 From: Michael Krufky Date: Sat, 5 Apr 2008 20:55:14 -0300 Subject: V4L/DVB (9149): hvr950q: led feedback based on snr Signed-off-by: Michael Krufky Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/dvb/frontends/au8522.c b/drivers/media/dvb/frontends/au8522.c index 0b82cc2..eabf9a6 100644 --- a/drivers/media/dvb/frontends/au8522.c +++ b/drivers/media/dvb/frontends/au8522.c @@ -40,6 +40,8 @@ struct au8522_state { u32 current_frequency; fe_modulation_t current_modulation; + u32 fe_status; + unsigned int led_state; }; static int debug; @@ -538,11 +540,98 @@ static int au8522_init(struct dvb_frontend *fe) return 0; } +static int au8522_led_gpio_enable(struct au8522_state *state, int onoff) +{ + struct au8522_led_config *led_config = state->config->led_cfg; + u8 val; + + /* bail out if we cant control an LED */ + if (!led_config || !led_config->gpio_output || + !led_config->gpio_output_enable || !led_config->gpio_output_disable) + return 0; + + val = au8522_readreg(state, 0x4000 | + (led_config->gpio_output & ~0xc000)); + if (onoff) { + /* enable GPIO output */ + val &= ~((led_config->gpio_output_enable >> 8) & 0xff); + val |= (led_config->gpio_output_enable & 0xff); + } else { + /* disable GPIO output */ + val &= ~((led_config->gpio_output_disable >> 8) & 0xff); + val |= (led_config->gpio_output_disable & 0xff); + } + return au8522_writereg(state, 0x8000 | + (led_config->gpio_output & ~0xc000), val); +} + +/* led = 0 | off + * led = 1 | signal ok + * led = 2 | signal strong + * led < 0 | only light led if leds are currently off + */ +static int au8522_led_ctrl(struct au8522_state *state, int led) +{ + struct au8522_led_config *led_config = state->config->led_cfg; + int i, ret = 0; + + /* bail out if we cant control an LED */ + if (!led_config || !led_config->gpio_leds || + !led_config->num_led_states || !led_config->led_states) + return 0; + + if (led < 0) { + /* if LED is already lit, then leave it as-is */ + if (state->led_state) + return 0; + else + led *= -1; + } + + /* toggle LED if changing state */ + if (state->led_state != led) { + u8 val; + + dprintk("%s: %d\n", __func__, led); + + au8522_led_gpio_enable(state, 1); + + val = au8522_readreg(state, 0x4000 | + (led_config->gpio_leds & ~0xc000)); + + /* start with all leds off */ + for (i = 0; i < led_config->num_led_states; i++) + val &= ~led_config->led_states[i]; + + /* set selected LED state */ + if (led < led_config->num_led_states) + val |= led_config->led_states[led]; + else if (led_config->num_led_states) + val |= + led_config->led_states[led_config->num_led_states - 1]; + + ret = au8522_writereg(state, 0x8000 | + (led_config->gpio_leds & ~0xc000), val); + if (ret < 0) + return ret; + + state->led_state = led; + + if (led == 0) + au8522_led_gpio_enable(state, 0); + } + + return 0; +} + static int au8522_sleep(struct dvb_frontend *fe) { struct au8522_state *state = fe->demodulator_priv; dprintk("%s()\n", __func__); + /* turn off led */ + au8522_led_ctrl(state, 0); + state->current_frequency = 0; return 0; @@ -592,12 +681,53 @@ static int au8522_read_status(struct dvb_frontend *fe, fe_status_t *status) *status |= FE_HAS_CARRIER | FE_HAS_SIGNAL; break; } + state->fe_status = *status; + + if (*status & FE_HAS_LOCK) + /* turn on LED, if it isn't on already */ + au8522_led_ctrl(state, -1); + else + /* turn off LED */ + au8522_led_ctrl(state, 0); dprintk("%s() status 0x%08x\n", __func__, *status); return 0; } +static int au8522_led_status(struct au8522_state *state, const u16 *snr) +{ + struct au8522_led_config *led_config = state->config->led_cfg; + int led; + u16 strong; + + /* bail out if we cant control an LED */ + if (!led_config) + return 0; + + if (0 == (state->fe_status & FE_HAS_LOCK)) + return au8522_led_ctrl(state, 0); + else if (state->current_modulation == QAM_256) + strong = led_config->qam256_strong; + else if (state->current_modulation == QAM_64) + strong = led_config->qam64_strong; + else /* (state->current_modulation == VSB_8) */ + strong = led_config->vsb8_strong; + + if (*snr >= strong) + led = 2; + else + led = 1; + + if ((state->led_state) && + (((strong < *snr) ? (*snr - strong) : (strong - *snr)) <= 10)) + /* snr didn't change enough to bother + * changing the color of the led */ + return 0; + + return au8522_led_ctrl(state, led); +} + static int au8522_read_snr(struct dvb_frontend *fe, u16 *snr) { struct au8522_state *state = fe->demodulator_priv; @@ -621,6 +751,9 @@ static int au8522_read_snr(struct dvb_frontend *fe, u16 *snr) au8522_readreg(state, 0x4311), snr); + if (state->config->led_cfg) + au8522_led_status(state, snr); + return ret; } diff --git a/drivers/media/dvb/frontends/au8522.h b/drivers/media/dvb/frontends/au8522.h index 595915a..7b94f55 100644 --- a/drivers/media/dvb/frontends/au8522.h +++ b/drivers/media/dvb/frontends/au8522.h @@ -30,6 +30,21 @@ enum au8522_if_freq { AU8522_IF_3_25MHZ, }; +struct au8522_led_config { + u16 vsb8_strong; + u16 qam64_strong; + u16 qam256_strong; + + u16 gpio_output; + /* unset hi bits, set low bits */ + u16 gpio_output_enable; + u16 gpio_output_disable; + + u16 gpio_leds; + u8 *led_states; + unsigned int num_led_states; +}; + struct au8522_config { /* the demodulator's i2c address */ u8 demod_address; @@ -39,6 +54,8 @@ struct au8522_config { #define AU8522_DEMODLOCKING 1 u8 status_mode; + struct au8522_led_config *led_cfg; + enum au8522_if_freq vsb_if; enum au8522_if_freq qam_if; }; diff --git a/drivers/media/video/au0828/au0828-dvb.c b/drivers/media/video/au0828/au0828-dvb.c index a52abce..f0fcdb4 100644 --- a/drivers/media/video/au0828/au0828-dvb.c +++ b/drivers/media/video/au0828/au0828-dvb.c @@ -36,11 +36,39 @@ DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); #define _AU0828_BULKPIPE 0x83 #define _BULKPIPESIZE 0xe522 +static u8 hauppauge_hvr950q_led_states[] = { + 0x00, /* off */ + 0x02, /* yellow */ + 0x04, /* green */ +}; + +static struct au8522_led_config hauppauge_hvr950q_led_cfg = { + .gpio_output = 0x00e0, + .gpio_output_enable = 0x6006, + .gpio_output_disable = 0x0660, + + .gpio_leds = 0x00e2, + .led_states = hauppauge_hvr950q_led_states, + .num_led_states = sizeof(hauppauge_hvr950q_led_states), + + .vsb8_strong = 20 /* dB */ * 10, + .qam64_strong = 25 /* dB */ * 10, + .qam256_strong = 32 /* dB */ * 10, +}; + static struct au8522_config hauppauge_hvr950q_config = { .demod_address = 0x8e >> 1, .status_mode = AU8522_DEMODLOCKING, .qam_if = AU8522_IF_6MHZ, .vsb_if = AU8522_IF_6MHZ, + .led_cfg = &hauppauge_hvr950q_led_cfg, +}; + +static struct au8522_config fusionhdtv7usb_config = { + .demod_address = 0x8e >> 1, + .status_mode = AU8522_DEMODLOCKING, + .qam_if = AU8522_IF_6MHZ, + .vsb_if = AU8522_IF_6MHZ, }; static struct au8522_config hauppauge_woodbury_config = { @@ -352,7 +380,6 @@ int au0828_dvb_register(struct au0828_dev *dev) switch (dev->board) { case AU0828_BOARD_HAUPPAUGE_HVR850: case AU0828_BOARD_HAUPPAUGE_HVR950Q: - case AU0828_BOARD_DVICO_FUSIONHDTV7: dvb->frontend = dvb_attach(au8522_attach, &hauppauge_hvr950q_config, &dev->i2c_adap); @@ -378,6 +405,16 @@ int au0828_dvb_register(struct au0828_dev *dev) 0x60, &dev->i2c_adap, &hauppauge_woodbury_tunerconfig); break; + case AU0828_BOARD_DVICO_FUSIONHDTV7: + dvb->frontend = dvb_attach(au8522_attach, + &fusionhdtv7usb_config, + &dev->i2c_adap); + if (dvb->frontend != NULL) { + dvb_attach(xc5000_attach, dvb->frontend, + &dev->i2c_adap, + &hauppauge_hvr950q_tunerconfig); + } + break; default: printk(KERN_WARNING "The frontend of your DVB/ATSC card " "isn't supported yet\n"); -- cgit v0.10.2 From 90b698dd47f3929f20746f828e2cd648bc6539dd Mon Sep 17 00:00:00 2001 From: Alexey Klimov Date: Thu, 9 Oct 2008 13:42:32 -0300 Subject: V4L/DVB (9151): dsbr100: Add returns and fix codingstyle for vidioc_s_ctrl Added return -EBUSY and fixed codingstyle issue Signed-off-by: Alexey Klimov Signed-off-by: Douglas Schilling Landgraf Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/radio/dsbr100.c b/drivers/media/radio/dsbr100.c index b3a5cb1..66783ff 100644 --- a/drivers/media/radio/dsbr100.c +++ b/drivers/media/radio/dsbr100.c @@ -360,11 +360,15 @@ static int vidioc_s_ctrl(struct file *file, void *priv, switch (ctrl->id) { case V4L2_CID_AUDIO_MUTE: if (ctrl->value) { - if (dsbr100_stop(radio)==-1) + if (dsbr100_stop(radio) == -1) { warn("Radio did not respond properly"); + return -EBUSY; + } } else { - if (dsbr100_start(radio)==-1) + if (dsbr100_start(radio) == -1) { warn("Radio did not respond properly"); + return -EBUSY; + } } return 0; } -- cgit v0.10.2 From b4be2048ce62d05d93608f82d5e986612ed4fdf7 Mon Sep 17 00:00:00 2001 From: Alexey Klimov Date: Thu, 9 Oct 2008 13:46:59 -0300 Subject: V4L/DVB (9152): radio-zoltrix: Add checking for frequency This patch adds printk messages, adds checking if frequency is set, adds return -EINVAL in right places in zoltrix-radio. Signed-off-by: Alexey Klimov Signed-off-by: Douglas Schilling Landgraf Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/radio/radio-zoltrix.c b/drivers/media/radio/radio-zoltrix.c index f75da63..15b10ba 100644 --- a/drivers/media/radio/radio-zoltrix.c +++ b/drivers/media/radio/radio-zoltrix.c @@ -123,8 +123,11 @@ static int zol_setfreq(struct zol_device *dev, unsigned long freq) unsigned int stereo = dev->stereo; int i; - if (freq == 0) - return 1; + if (freq == 0) { + printk(KERN_WARNING "zoltrix: received zero freq. Failed to set.\n"); + return -EINVAL; + } + m = (freq / 160 - 8800) * 2; f = (unsigned long long) m + 0x4d1c; @@ -279,7 +282,10 @@ static int vidioc_s_frequency(struct file *file, void *priv, struct zol_device *zol = video_drvdata(file); zol->curfreq = f->frequency; - zol_setfreq(zol, zol->curfreq); + if (zol_setfreq(zol, zol->curfreq) != 0) { + printk(KERN_WARNING "zoltrix: Set frequency failed.\n"); + return -EINVAL; + } return 0; } @@ -343,7 +349,10 @@ static int vidioc_s_ctrl(struct file *file, void *priv, return 0; } zol->stereo = 1; - zol_setfreq(zol, zol->curfreq); + if (zol_setfreq(zol, zol->curfreq) != 0) { + printk(KERN_WARNING "zoltrix: Set frequency failed.\n"); + return -EINVAL; + } #if 0 /* FIXME: Implement stereo/mono switch on V4L2 */ if (v->mode & VIDEO_SOUND_STEREO) { -- cgit v0.10.2 From 46510b56ca56a25ce973d6a6e8490c1109ff94ef Mon Sep 17 00:00:00 2001 From: Thierry MERLE Date: Sat, 11 Oct 2008 16:56:13 -0300 Subject: V4L/DVB (9155): em28xx-dvb: dvb_init() code factorization In dvb_init(), case EM2880_BOARD_TERRATEC_HYBRID_XS: case EM2880_BOARD_KWORLD_DVB_310U: can be put in the same case than EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900 since they do the same thing. Signed-off-by: Thierry MERLE Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/em28xx/em28xx-dvb.c b/drivers/media/video/em28xx/em28xx-dvb.c index 855ad39..c99e238 100644 --- a/drivers/media/video/em28xx/em28xx-dvb.c +++ b/drivers/media/video/em28xx/em28xx-dvb.c @@ -421,6 +421,8 @@ static int dvb_init(struct em28xx *dev) } break; case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900: + case EM2880_BOARD_TERRATEC_HYBRID_XS: + case EM2880_BOARD_KWORLD_DVB_310U: dvb->frontend = dvb_attach(zl10353_attach, &em28xx_zl10353_with_xc3028, &dev->i2c_adap); @@ -442,24 +444,6 @@ static int dvb_init(struct em28xx *dev) } break; #endif - case EM2880_BOARD_TERRATEC_HYBRID_XS: - dvb->frontend = dvb_attach(zl10353_attach, - &em28xx_zl10353_with_xc3028, - &dev->i2c_adap); - if (attach_xc3028(0x61, dev) < 0) { - result = -EINVAL; - goto out_free; - } - break; - case EM2880_BOARD_KWORLD_DVB_310U: - dvb->frontend = dvb_attach(zl10353_attach, - &em28xx_zl10353_with_xc3028, - &dev->i2c_adap); - if (attach_xc3028(0x61, dev) < 0) { - result = -EINVAL; - goto out_free; - } - break; default: printk(KERN_ERR "%s/2: The frontend of your DVB/ATSC card" " isn't supported yet\n", -- cgit v0.10.2 From 741e1f3b81c22c81f4ef401856cd22cad0bbd554 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Mon, 8 Sep 2008 16:59:02 -0300 Subject: V4L/DVB (9157): cx18/ivtv: add 'PCI:' prefix to bus_info. Suggested by Martin Dauskardt. This is conform what the other drivers do. Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/cx18/cx18-ioctl.c b/drivers/media/video/cx18/cx18-ioctl.c index 83aa9cb..f0ca50f 100644 --- a/drivers/media/video/cx18/cx18-ioctl.c +++ b/drivers/media/video/cx18/cx18-ioctl.c @@ -346,7 +346,7 @@ static int cx18_querycap(struct file *file, void *fh, strlcpy(vcap->driver, CX18_DRIVER_NAME, sizeof(vcap->driver)); strlcpy(vcap->card, cx->card_name, sizeof(vcap->card)); - strlcpy(vcap->bus_info, pci_name(cx->dev), sizeof(vcap->bus_info)); + snprintf(vcap->bus_info, sizeof(vcap->bus_info), "PCI:%s", pci_name(cx->dev)); vcap->version = CX18_DRIVER_VERSION; /* version */ vcap->capabilities = cx->v4l2_cap; /* capabilities */ return 0; diff --git a/drivers/media/video/ivtv/ivtv-ioctl.c b/drivers/media/video/ivtv/ivtv-ioctl.c index f00854a..f5b289e 100644 --- a/drivers/media/video/ivtv/ivtv-ioctl.c +++ b/drivers/media/video/ivtv/ivtv-ioctl.c @@ -750,7 +750,7 @@ static int ivtv_querycap(struct file *file, void *fh, struct v4l2_capability *vc strlcpy(vcap->driver, IVTV_DRIVER_NAME, sizeof(vcap->driver)); strlcpy(vcap->card, itv->card_name, sizeof(vcap->card)); - strlcpy(vcap->bus_info, pci_name(itv->dev), sizeof(vcap->bus_info)); + snprintf(vcap->bus_info, sizeof(vcap->bus_info), "PCI:%s", pci_name(itv->dev)); vcap->version = IVTV_DRIVER_VERSION; /* version */ vcap->capabilities = itv->v4l2_cap; /* capabilities */ return 0; -- cgit v0.10.2 From d4f59de43ee5dd632d4068b6486e45802e6e853d Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Tue, 30 Sep 2008 03:14:02 -0300 Subject: V4L/DVB (9159): saa5249: fix compile errors Add missing include. Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/saa5249.c b/drivers/media/video/saa5249.c index 421071c..3bb959c 100644 --- a/drivers/media/video/saa5249.c +++ b/drivers/media/video/saa5249.c @@ -48,6 +48,7 @@ #include #include #include +#include #include #include #include -- cgit v0.10.2 From 3c7b933bea2ee380d54b57b99dee42b1726a4eaa Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Fri, 3 Oct 2008 11:42:07 -0300 Subject: V4L/DVB (9160): v4l: remove vidioc_enum_fmt_vbi_cap Remove the vidioc_enum_fmt_vbi_cap ops: it was scheduled for removal in 2.6.28 since the v4l2 specification says that V4L2_BUF_TYPE_VBI_CAPTURE should not support VIDIOC_ENUM_FMT. It's also pretty pointless. Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/bt8xx/bttv-driver.c b/drivers/media/video/bt8xx/bttv-driver.c index 9bb247c..5858bf5 100644 --- a/drivers/media/video/bt8xx/bttv-driver.c +++ b/drivers/media/video/bt8xx/bttv-driver.c @@ -2664,18 +2664,6 @@ static int bttv_querycap(struct file *file, void *priv, return 0; } -static int bttv_enum_fmt_vbi_cap(struct file *file, void *priv, - struct v4l2_fmtdesc *f) -{ - if (0 != f->index) - return -EINVAL; - - f->pixelformat = V4L2_PIX_FMT_GREY; - strcpy(f->description, "vbi data"); - - return 0; -} - static int bttv_enum_fmt_cap_ovr(struct v4l2_fmtdesc *f) { int index = -1, i; @@ -3381,7 +3369,6 @@ static const struct v4l2_ioctl_ops bttv_ioctl_ops = { .vidioc_g_fmt_vid_overlay = bttv_g_fmt_vid_overlay, .vidioc_try_fmt_vid_overlay = bttv_try_fmt_vid_overlay, .vidioc_s_fmt_vid_overlay = bttv_s_fmt_vid_overlay, - .vidioc_enum_fmt_vbi_cap = bttv_enum_fmt_vbi_cap, .vidioc_g_fmt_vbi_cap = bttv_g_fmt_vbi_cap, .vidioc_try_fmt_vbi_cap = bttv_try_fmt_vbi_cap, .vidioc_s_fmt_vbi_cap = bttv_s_fmt_vbi_cap, diff --git a/drivers/media/video/saa7134/saa7134-video.c b/drivers/media/video/saa7134/saa7134-video.c index 9aafd58..02bb674 100644 --- a/drivers/media/video/saa7134/saa7134-video.c +++ b/drivers/media/video/saa7134/saa7134-video.c @@ -2110,18 +2110,6 @@ static int saa7134_enum_fmt_vid_overlay(struct file *file, void *priv, return 0; } -static int saa7134_enum_fmt_vbi_cap(struct file *file, void *priv, - struct v4l2_fmtdesc *f) -{ - if (0 != f->index) - return -EINVAL; - - f->pixelformat = V4L2_PIX_FMT_GREY; - strcpy(f->description, "vbi data"); - - return 0; -} - static int saa7134_g_fbuf(struct file *file, void *f, struct v4l2_framebuffer *fb) { @@ -2412,7 +2400,6 @@ static const struct v4l2_ioctl_ops video_ioctl_ops = { .vidioc_g_fmt_vid_overlay = saa7134_g_fmt_vid_overlay, .vidioc_try_fmt_vid_overlay = saa7134_try_fmt_vid_overlay, .vidioc_s_fmt_vid_overlay = saa7134_s_fmt_vid_overlay, - .vidioc_enum_fmt_vbi_cap = saa7134_enum_fmt_vbi_cap, .vidioc_g_fmt_vbi_cap = saa7134_try_get_set_fmt_vbi_cap, .vidioc_try_fmt_vbi_cap = saa7134_try_get_set_fmt_vbi_cap, .vidioc_s_fmt_vbi_cap = saa7134_try_get_set_fmt_vbi_cap, diff --git a/drivers/media/video/v4l2-ioctl.c b/drivers/media/video/v4l2-ioctl.c index 140ef92..155c9d7 100644 --- a/drivers/media/video/v4l2-ioctl.c +++ b/drivers/media/video/v4l2-ioctl.c @@ -746,18 +746,6 @@ static int __video_do_ioctl(struct inode *inode, struct file *file, ret = ops->vidioc_enum_fmt_vid_overlay(file, fh, f); break; -#if 1 - /* V4L2_BUF_TYPE_VBI_CAPTURE should not support VIDIOC_ENUM_FMT - * according to the spec. The bttv and saa7134 drivers support - * it though, so just warn that this is deprecated and will be - * removed in the near future. */ - case V4L2_BUF_TYPE_VBI_CAPTURE: - if (ops->vidioc_enum_fmt_vbi_cap) { - printk(KERN_WARNING "vidioc_enum_fmt_vbi_cap will be removed in 2.6.28!\n"); - ret = ops->vidioc_enum_fmt_vbi_cap(file, fh, f); - } - break; -#endif case V4L2_BUF_TYPE_VIDEO_OUTPUT: if (ops->vidioc_enum_fmt_vid_out) ret = ops->vidioc_enum_fmt_vid_out(file, fh, f); diff --git a/include/media/v4l2-ioctl.h b/include/media/v4l2-ioctl.h index dc64046..0bef03a 100644 --- a/include/media/v4l2-ioctl.h +++ b/include/media/v4l2-ioctl.h @@ -39,11 +39,6 @@ struct v4l2_ioctl_ops { struct v4l2_fmtdesc *f); int (*vidioc_enum_fmt_vid_out) (struct file *file, void *fh, struct v4l2_fmtdesc *f); -#if 1 - /* deprecated, will be removed in 2.6.28 */ - int (*vidioc_enum_fmt_vbi_cap) (struct file *file, void *fh, - struct v4l2_fmtdesc *f); -#endif int (*vidioc_enum_fmt_type_private)(struct file *file, void *fh, struct v4l2_fmtdesc *f); -- cgit v0.10.2 From a8b864354e060dda1000e62d1fea7c1274581caf Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Sat, 4 Oct 2008 08:05:30 -0300 Subject: V4L/DVB (9162): ivtv: fix raw/sliced VBI mixup The service_set field was used in saa7115 and cx25840 to determine whether raw or sliced VBI was desired. This is incorrect since it is perfectly valid to select sliced VBI with a service_set of 0. Instead these drivers should checked on VIDIOC_S_FMT whether the type field matches the raw or sliced VBI type. Updated ivtv accordingly. Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/cx25840/cx25840-vbi.c b/drivers/media/video/cx25840/cx25840-vbi.c index 69f2bbd..58e6ef1 100644 --- a/drivers/media/video/cx25840/cx25840-vbi.c +++ b/drivers/media/video/cx25840/cx25840-vbi.c @@ -141,10 +141,11 @@ int cx25840_vbi(struct i2c_client *client, unsigned int cmd, void *arg) u8 lcr[24]; fmt = arg; - if (fmt->type != V4L2_BUF_TYPE_SLICED_VBI_CAPTURE) + if (fmt->type != V4L2_BUF_TYPE_SLICED_VBI_CAPTURE && + fmt->type != V4L2_BUF_TYPE_VBI_CAPTURE) return -EINVAL; svbi = &fmt->fmt.sliced; - if (svbi->service_set == 0) { + if (fmt->type == V4L2_BUF_TYPE_VBI_CAPTURE) { /* raw VBI */ memset(svbi, 0, sizeof(*svbi)); diff --git a/drivers/media/video/ivtv/ivtv-driver.c b/drivers/media/video/ivtv/ivtv-driver.c index 7aa61b6..aeaa13f 100644 --- a/drivers/media/video/ivtv/ivtv-driver.c +++ b/drivers/media/video/ivtv/ivtv-driver.c @@ -720,7 +720,7 @@ static int __devinit ivtv_init_struct1(struct ivtv *itv) itv->speed = 1000; /* VBI */ - itv->vbi.in.type = V4L2_BUF_TYPE_SLICED_VBI_CAPTURE; + itv->vbi.in.type = V4L2_BUF_TYPE_VBI_CAPTURE; itv->vbi.sliced_in = &itv->vbi.in.fmt.sliced; /* Init the sg table for osd/yuv output */ diff --git a/drivers/media/video/ivtv/ivtv-driver.h b/drivers/media/video/ivtv/ivtv-driver.h index b76a122..be2d779 100644 --- a/drivers/media/video/ivtv/ivtv-driver.h +++ b/drivers/media/video/ivtv/ivtv-driver.h @@ -750,6 +750,12 @@ void ivtv_read_eeprom(struct ivtv *itv, struct tveeprom *tv); /* First-open initialization: load firmware, init cx25840, etc. */ int ivtv_init_on_first_open(struct ivtv *itv); +/* Test if the current VBI mode is raw (1) or sliced (0) */ +static inline int ivtv_raw_vbi(const struct ivtv *itv) +{ + return itv->vbi.in.type == V4L2_BUF_TYPE_VBI_CAPTURE; +} + /* This is a PCI post thing, where if the pci register is not read, then the write doesn't always take effect right away. By reading back the register any pending PCI writes will be performed (in order), and so diff --git a/drivers/media/video/ivtv/ivtv-fileops.c b/drivers/media/video/ivtv/ivtv-fileops.c index 304261e..b7457fc 100644 --- a/drivers/media/video/ivtv/ivtv-fileops.c +++ b/drivers/media/video/ivtv/ivtv-fileops.c @@ -78,7 +78,7 @@ static int ivtv_claim_stream(struct ivtv_open_id *id, int type) if (type == IVTV_DEC_STREAM_TYPE_MPG) { vbi_type = IVTV_DEC_STREAM_TYPE_VBI; } else if (type == IVTV_ENC_STREAM_TYPE_MPG && - itv->vbi.insert_mpeg && itv->vbi.sliced_in->service_set) { + itv->vbi.insert_mpeg && !ivtv_raw_vbi(itv)) { vbi_type = IVTV_ENC_STREAM_TYPE_VBI; } else { return 0; @@ -305,7 +305,7 @@ static size_t ivtv_copy_buf_to_user(struct ivtv_stream *s, struct ivtv_buffer *b if (len > ucount) len = ucount; if (itv->vbi.insert_mpeg && s->type == IVTV_ENC_STREAM_TYPE_MPG && - itv->vbi.sliced_in->service_set && buf != &itv->vbi.sliced_mpeg_buf) { + !ivtv_raw_vbi(itv) && buf != &itv->vbi.sliced_mpeg_buf) { const char *start = buf->buf + buf->readpos; const char *p = start + 1; const u8 *q; @@ -372,7 +372,7 @@ static ssize_t ivtv_read(struct ivtv_stream *s, char __user *ubuf, size_t tot_co /* Each VBI buffer is one frame, the v4l2 API says that for VBI the frames should arrive one-by-one, so make sure we never output more than one VBI frame at a time */ if (s->type == IVTV_DEC_STREAM_TYPE_VBI || - (s->type == IVTV_ENC_STREAM_TYPE_VBI && itv->vbi.sliced_in->service_set)) + (s->type == IVTV_ENC_STREAM_TYPE_VBI && !ivtv_raw_vbi(itv))) single_frame = 1; for (;;) { diff --git a/drivers/media/video/ivtv/ivtv-ioctl.c b/drivers/media/video/ivtv/ivtv-ioctl.c index f5b289e..3d0013b 100644 --- a/drivers/media/video/ivtv/ivtv-ioctl.c +++ b/drivers/media/video/ivtv/ivtv-ioctl.c @@ -575,8 +575,11 @@ static int ivtv_s_fmt_vbi_cap(struct file *file, void *fh, struct v4l2_format *f { struct ivtv *itv = ((struct ivtv_open_id *)fh)->itv; + if (!ivtv_raw_vbi(itv) && atomic_read(&itv->capturing) > 0) + return -EBUSY; itv->vbi.sliced_in->service_set = 0; - itv->video_dec_func(itv, VIDIOC_S_FMT, &itv->vbi.in); + itv->vbi.in.type = V4L2_BUF_TYPE_VBI_CAPTURE; + itv->video_dec_func(itv, VIDIOC_S_FMT, fmt); return ivtv_g_fmt_vbi_cap(file, fh, fmt); } @@ -591,8 +594,9 @@ static int ivtv_s_fmt_sliced_vbi_cap(struct file *file, void *fh, struct v4l2_fo return ret; check_service_set(vbifmt, itv->is_50hz); - if (atomic_read(&itv->capturing) > 0) + if (ivtv_raw_vbi(itv) && atomic_read(&itv->capturing) > 0) return -EBUSY; + itv->vbi.in.type = V4L2_BUF_TYPE_SLICED_VBI_CAPTURE; itv->video_dec_func(itv, VIDIOC_S_FMT, fmt); memcpy(itv->vbi.sliced_in, vbifmt, sizeof(*itv->vbi.sliced_in)); return 0; diff --git a/drivers/media/video/ivtv/ivtv-streams.c b/drivers/media/video/ivtv/ivtv-streams.c index 24273fb..5bbf31e 100644 --- a/drivers/media/video/ivtv/ivtv-streams.c +++ b/drivers/media/video/ivtv/ivtv-streams.c @@ -334,7 +334,7 @@ void ivtv_streams_cleanup(struct ivtv *itv, int unregister) static void ivtv_vbi_setup(struct ivtv *itv) { - int raw = itv->vbi.sliced_in->service_set == 0; + int raw = ivtv_raw_vbi(itv); u32 data[CX2341X_MBOX_MAX_DATA]; int lines; int i; diff --git a/drivers/media/video/ivtv/ivtv-vbi.c b/drivers/media/video/ivtv/ivtv-vbi.c index 1ce9deb..4a37a7d 100644 --- a/drivers/media/video/ivtv/ivtv-vbi.c +++ b/drivers/media/video/ivtv/ivtv-vbi.c @@ -334,7 +334,7 @@ void ivtv_process_vbi_data(struct ivtv *itv, struct ivtv_buffer *buf, int y; /* Raw VBI data */ - if (streamtype == IVTV_ENC_STREAM_TYPE_VBI && itv->vbi.sliced_in->service_set == 0) { + if (streamtype == IVTV_ENC_STREAM_TYPE_VBI && ivtv_raw_vbi(itv)) { u8 type; ivtv_buf_swap(buf); diff --git a/drivers/media/video/saa7115.c b/drivers/media/video/saa7115.c index 4ed7d65..c8e9cb3 100644 --- a/drivers/media/video/saa7115.c +++ b/drivers/media/video/saa7115.c @@ -1057,7 +1057,7 @@ static void saa711x_set_lcr(struct i2c_client *client, struct v4l2_sliced_vbi_fo for (i = 0; i <= 23; i++) lcr[i] = 0xff; - if (fmt->service_set == 0) { + if (fmt == NULL) { /* raw VBI */ if (is_50hz) for (i = 6; i <= 23; i++) @@ -1113,7 +1113,7 @@ static void saa711x_set_lcr(struct i2c_client *client, struct v4l2_sliced_vbi_fo } /* enable/disable raw VBI capturing */ - saa711x_writeregs(client, fmt->service_set == 0 ? + saa711x_writeregs(client, fmt == NULL ? saa7115_cfg_vbi_on : saa7115_cfg_vbi_off); } @@ -1153,6 +1153,10 @@ static int saa711x_set_v4lfmt(struct i2c_client *client, struct v4l2_format *fmt saa711x_set_lcr(client, &fmt->fmt.sliced); return 0; } + if (fmt->type == V4L2_BUF_TYPE_VBI_CAPTURE) { + saa711x_set_lcr(client, NULL); + return 0; + } if (fmt->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) return -EINVAL; -- cgit v0.10.2 From c777549fc9c5c704707394b0235a9a6794247b83 Mon Sep 17 00:00:00 2001 From: Ian Armstrong Date: Sat, 4 Oct 2008 10:28:24 -0300 Subject: V4L/DVB (9163): ivtvfb: fix sparse warnings and improve write function Signed-off-by: Ian Armstrong Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/ivtv/ivtvfb.c b/drivers/media/video/ivtv/ivtvfb.c index bdfda48..249758e 100644 --- a/drivers/media/video/ivtv/ivtvfb.c +++ b/drivers/media/video/ivtv/ivtvfb.c @@ -275,7 +275,6 @@ static int ivtvfb_prep_dec_dma_to_device(struct ivtv *itv, int size_in_bytes) { DEFINE_WAIT(wait); - int ret = 0; int got_sig = 0; mutex_lock(&itv->udma.lock); @@ -316,7 +315,7 @@ static int ivtvfb_prep_dec_dma_to_device(struct ivtv *itv, return -EINTR; } - return ret; + return 0; } static int ivtvfb_prep_frame(struct ivtv *itv, int cmd, void __user *source, @@ -373,6 +372,7 @@ static ssize_t ivtvfb_write(struct fb_info *info, const char __user *buf, unsigned long p = *ppos; void *dst; int err = 0; + int dma_err; unsigned long total_size; struct ivtv *itv = (struct ivtv *) info->par; unsigned long dma_offset = @@ -399,7 +399,6 @@ static ssize_t ivtvfb_write(struct fb_info *info, const char __user *buf, if (count + p > total_size) { if (!err) err = -ENOSPC; - count = total_size - p; } @@ -408,39 +407,34 @@ static ssize_t ivtvfb_write(struct fb_info *info, const char __user *buf, if (info->fbops->fb_sync) info->fbops->fb_sync(info); - if (!access_ok(VERIFY_READ, buf, count)) { - IVTVFB_WARN("Invalid userspace pointer 0x%08lx\n", - (unsigned long)buf); - err = -EFAULT; - } - - if (!err) { - /* If transfer size > threshold and both src/dst - addresses are aligned, use DMA */ - if (count >= 4096 && - ((unsigned long)buf & 3) == ((unsigned long)dst & 3)) { - /* Odd address = can't DMA. Align */ - if ((unsigned long)dst & 3) { - lead = 4 - ((unsigned long)dst & 3); - memcpy(dst, buf, lead); - buf += lead; - dst += lead; - } - /* DMA resolution is 32 bits */ - if ((count - lead) & 3) - tail = (count - lead) & 3; - /* DMA the data */ - dma_size = count - lead - tail; - err = ivtvfb_prep_dec_dma_to_device(itv, - p + lead + dma_offset, (void *)buf, dma_size); - dst += dma_size; - buf += dma_size; - /* Copy any leftover data */ - if (tail) - memcpy(dst, buf, tail); - } else { - memcpy(dst, buf, count); + /* If transfer size > threshold and both src/dst + addresses are aligned, use DMA */ + if (count >= 4096 && + ((unsigned long)buf & 3) == ((unsigned long)dst & 3)) { + /* Odd address = can't DMA. Align */ + if ((unsigned long)dst & 3) { + lead = 4 - ((unsigned long)dst & 3); + if (copy_from_user(dst, buf, lead)) + return -EFAULT; + buf += lead; + dst += lead; } + /* DMA resolution is 32 bits */ + if ((count - lead) & 3) + tail = (count - lead) & 3; + /* DMA the data */ + dma_size = count - lead - tail; + dma_err = ivtvfb_prep_dec_dma_to_device(itv, + p + lead + dma_offset, (void __user *)buf, dma_size); + if (dma_err) + return dma_err; + dst += dma_size; + buf += dma_size; + /* Copy any leftover data */ + if (tail && copy_from_user(dst, buf, tail)) + return -EFAULT; + } else if (copy_from_user(dst, buf, count)) { + return -EFAULT; } if (!err) @@ -463,9 +457,12 @@ static int ivtvfb_ioctl(struct fb_info *info, unsigned int cmd, unsigned long ar vblank.flags = FB_VBLANK_HAVE_COUNT |FB_VBLANK_HAVE_VCOUNT | FB_VBLANK_HAVE_VSYNC; trace = read_reg(0x028c0) >> 16; - if (itv->is_50hz && trace > 312) trace -= 312; - else if (itv->is_60hz && trace > 262) trace -= 262; - if (trace == 1) vblank.flags |= FB_VBLANK_VSYNCING; + if (itv->is_50hz && trace > 312) + trace -= 312; + else if (itv->is_60hz && trace > 262) + trace -= 262; + if (trace == 1) + vblank.flags |= FB_VBLANK_VSYNCING; vblank.count = itv->last_vsync_field; vblank.vcount = trace; vblank.hcount = 0; @@ -476,7 +473,8 @@ static int ivtvfb_ioctl(struct fb_info *info, unsigned int cmd, unsigned long ar case FBIO_WAITFORVSYNC: prepare_to_wait(&itv->vsync_waitq, &wait, TASK_INTERRUPTIBLE); - if (!schedule_timeout(msecs_to_jiffies(50))) rc = -ETIMEDOUT; + if (!schedule_timeout(msecs_to_jiffies(50))) + rc = -ETIMEDOUT; finish_wait(&itv->vsync_waitq, &wait); return rc; -- cgit v0.10.2 From 4ee0e42b31b282d0d0bb11effbbeb0610ee76d09 Mon Sep 17 00:00:00 2001 From: Ian Armstrong Date: Mon, 6 Oct 2008 03:03:18 -0300 Subject: V4L/DVB (9164): ivtvfb: a small cosmetic change Signed-off-by: Ian Armstrong Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/ivtv/ivtvfb.c b/drivers/media/video/ivtv/ivtvfb.c index 249758e..8a4a150 100644 --- a/drivers/media/video/ivtv/ivtvfb.c +++ b/drivers/media/video/ivtv/ivtvfb.c @@ -367,7 +367,7 @@ static int ivtvfb_prep_frame(struct ivtv *itv, int cmd, void __user *source, } static ssize_t ivtvfb_write(struct fb_info *info, const char __user *buf, - size_t count, loff_t *ppos) + size_t count, loff_t *ppos) { unsigned long p = *ppos; void *dst; -- cgit v0.10.2 From ec9faa1cfac1dd64a2a865dc7c577f3d483656bd Mon Sep 17 00:00:00 2001 From: Ian Armstrong Date: Mon, 6 Oct 2008 03:06:08 -0300 Subject: V4L/DVB (9165): ivtv: V4L2_FBUF_FLAG_OVERLAY status fix When the framebuffer format was queried via VIDIOC_G_FBUF, V4L2_FBUF_FLAG_OVERLAY would only be correctly returned for certain screen depths. Signed-off-by: Ian Armstrong Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/ivtv/ivtv-ioctl.c b/drivers/media/video/ivtv/ivtv-ioctl.c index 3d0013b..3c2628a 100644 --- a/drivers/media/video/ivtv/ivtv-ioctl.c +++ b/drivers/media/video/ivtv/ivtv-ioctl.c @@ -1363,6 +1363,9 @@ static int ivtv_g_fbuf(struct file *file, void *fh, struct v4l2_framebuffer *fb) if (itv->osd_global_alpha_state) fb->flags |= V4L2_FBUF_FLAG_GLOBAL_ALPHA; + if (yi->track_osd) + fb->flags |= V4L2_FBUF_FLAG_OVERLAY; + pixfmt &= 7; /* no local alpha for RGB565 or unknown formats */ @@ -1382,8 +1385,6 @@ static int ivtv_g_fbuf(struct file *file, void *fh, struct v4l2_framebuffer *fb) else fb->flags |= V4L2_FBUF_FLAG_LOCAL_ALPHA; } - if (yi->track_osd) - fb->flags |= V4L2_FBUF_FLAG_OVERLAY; return 0; } -- cgit v0.10.2 From 2bd7ac55c31cb4f42e331d69dde9fc034a68944f Mon Sep 17 00:00:00 2001 From: Ian Armstrong Date: Thu, 9 Oct 2008 12:04:23 -0300 Subject: V4L/DVB (9166): ivtv - Fix potential race condition in yuv handler Modified yuv register update handling to remove a potential race condition which could occur with the first video frame. Also removed a forced yuv position update, since changing the source video dimensions or interlace settings doesn't affect the frame already being displayed. Signed-off-by: Ian Armstrong Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/ivtv/ivtv-driver.h b/drivers/media/video/ivtv/ivtv-driver.h index be2d779..bc29436 100644 --- a/drivers/media/video/ivtv/ivtv-driver.h +++ b/drivers/media/video/ivtv/ivtv-driver.h @@ -506,6 +506,8 @@ struct yuv_playback_info struct v4l2_rect main_rect; u32 v4l2_src_w; u32 v4l2_src_h; + + u8 running; /* Have any frames been displayed */ }; #define IVTV_VBI_FRAMES 32 diff --git a/drivers/media/video/ivtv/ivtv-ioctl.c b/drivers/media/video/ivtv/ivtv-ioctl.c index 3c2628a..8696527 100644 --- a/drivers/media/video/ivtv/ivtv-ioctl.c +++ b/drivers/media/video/ivtv/ivtv-ioctl.c @@ -644,8 +644,6 @@ static int ivtv_s_fmt_vid_out(struct file *file, void *fh, struct v4l2_format *f itv->dma_data_req_size = 1080 * ((yi->v4l2_src_h + 31) & ~31); - /* Force update of yuv registers */ - yi->yuv_forced_update = 1; return 0; } diff --git a/drivers/media/video/ivtv/ivtv-irq.c b/drivers/media/video/ivtv/ivtv-irq.c index 34f3ab8..f5d00ec 100644 --- a/drivers/media/video/ivtv/ivtv-irq.c +++ b/drivers/media/video/ivtv/ivtv-irq.c @@ -753,7 +753,7 @@ static void ivtv_irq_vsync(struct ivtv *itv) */ unsigned int frame = read_reg(0x28c0) & 1; struct yuv_playback_info *yi = &itv->yuv_info; - int last_dma_frame = atomic_read(&itv->yuv_info.next_dma_frame); + int last_dma_frame = atomic_read(&yi->next_dma_frame); struct yuv_frame_info *f = &yi->new_frame_info[last_dma_frame]; if (0) IVTV_DEBUG_IRQ("DEC VSYNC\n"); @@ -772,6 +772,7 @@ static void ivtv_irq_vsync(struct ivtv *itv) next_dma_frame = (next_dma_frame + 1) % IVTV_YUV_BUFFERS; atomic_set(&yi->next_dma_frame, next_dma_frame); yi->fields_lapsed = -1; + yi->running = 1; } } } @@ -804,9 +805,11 @@ static void ivtv_irq_vsync(struct ivtv *itv) } /* Check if we need to update the yuv registers */ - if ((yi->yuv_forced_update || f->update) && last_dma_frame != -1) { + if (yi->running && (yi->yuv_forced_update || f->update)) { if (!f->update) { - last_dma_frame = (u8)(last_dma_frame - 1) % IVTV_YUV_BUFFERS; + last_dma_frame = + (u8)(atomic_read(&yi->next_dma_frame) - + 1) % IVTV_YUV_BUFFERS; f = &yi->new_frame_info[last_dma_frame]; } diff --git a/drivers/media/video/ivtv/ivtv-yuv.c b/drivers/media/video/ivtv/ivtv-yuv.c index 3092ff1..ee91107 100644 --- a/drivers/media/video/ivtv/ivtv-yuv.c +++ b/drivers/media/video/ivtv/ivtv-yuv.c @@ -1147,6 +1147,7 @@ void ivtv_yuv_close(struct ivtv *itv) IVTV_DEBUG_YUV("ivtv_yuv_close\n"); ivtv_waitq(&itv->vsync_waitq); + yi->running = 0; atomic_set(&yi->next_dma_frame, -1); atomic_set(&yi->next_fill_frame, 0); -- cgit v0.10.2 From fa405d7094489828014315a34f0c21fba30be38c Mon Sep 17 00:00:00 2001 From: Huang Weiyi Date: Sun, 12 Oct 2008 09:23:29 -0300 Subject: V4L/DVB: v4l2-dev: remove duplicated #include Removed duplicated include "media/cx2341x.h" in drivers/media/video/cx23885/cx23885-417.c. Signed-off-by: Huang Weiyi Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/cx23885/cx23885-417.c b/drivers/media/video/cx23885/cx23885-417.c index e54df81..395c11f 100644 --- a/drivers/media/video/cx23885/cx23885-417.c +++ b/drivers/media/video/cx23885/cx23885-417.c @@ -36,7 +36,6 @@ #include #include "cx23885.h" -#include "media/cx2341x.h" #define CX23885_FIRM_IMAGE_SIZE 376836 #define CX23885_FIRM_IMAGE_NAME "v4l-cx23885-enc.fw" -- cgit v0.10.2 From ba340b40a5f65261731583f67d7ec8cafbf5cfaa Mon Sep 17 00:00:00 2001 From: Brian Rogers Date: Mon, 13 Oct 2008 08:37:06 -0300 Subject: V4L/DVB (9168): Add support for MSI TV@nywhere Plus remote The IR controller has a couple quirks. It won't respond until some other device on the bus is probed. To work around that, probe 0x50 first. Then, since it won't respond to a zero-byte read, probe with a one-byte read. Signed-off-by: Brian Rogers [mchehab.redhat.com: Fix merge conflicts and remove an unused var] Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/common/ir-keymaps.c b/drivers/media/common/ir-keymaps.c index b7ed88c..4952aeb 100644 --- a/drivers/media/common/ir-keymaps.c +++ b/drivers/media/common/ir-keymaps.c @@ -517,7 +517,8 @@ EXPORT_SYMBOL_GPL(ir_codes_adstech_dvb_t_pci); /* ---------------------------------------------------------------------- */ -/* MSI TV@nywhere remote */ +/* MSI TV@nywhere MASTER remote */ + IR_KEYTAB_TYPE ir_codes_msi_tvanywhere[IR_KEYTAB_SIZE] = { /* Keys 0 to 9 */ [ 0x00 ] = KEY_0, @@ -551,6 +552,95 @@ EXPORT_SYMBOL_GPL(ir_codes_msi_tvanywhere); /* ---------------------------------------------------------------------- */ +/* + Keycodes for remote on the MSI TV@nywhere Plus. The controller IC on the card + is marked "KS003". The controller is I2C at address 0x30, but does not seem + to respond to probes until a read is performed from a valid device. + I don't know why... + + Note: This remote may be of similar or identical design to the + Pixelview remote (?). The raw codes and duplicate button codes + appear to be the same. + + Henry Wong + Some changes to formatting and keycodes by Mark Schultz + +*/ + +IR_KEYTAB_TYPE ir_codes_msi_tvanywhere_plus[IR_KEYTAB_SIZE] = { + +/* ---- Remote Button Layout ---- + + POWER SOURCE SCAN MUTE + TV/FM 1 2 3 + |> 4 5 6 + <| 7 8 9 + ^^UP 0 + RECALL + vvDN RECORD STOP PLAY + + MINIMIZE ZOOM + + CH+ + VOL- VOL+ + CH- + + SNAPSHOT MTS + + << FUNC >> RESET +*/ + + [0x01] = KEY_KP1, /* 1 */ + [0x0b] = KEY_KP2, /* 2 */ + [0x1b] = KEY_KP3, /* 3 */ + [0x05] = KEY_KP4, /* 4 */ + [0x09] = KEY_KP5, /* 5 */ + [0x15] = KEY_KP6, /* 6 */ + [0x06] = KEY_KP7, /* 7 */ + [0x0a] = KEY_KP8, /* 8 */ + [0x12] = KEY_KP9, /* 9 */ + [0x02] = KEY_KP0, /* 0 */ + [0x10] = KEY_KPPLUS, /* + */ + [0x13] = KEY_AGAIN, /* Recall */ + + [0x1e] = KEY_POWER, /* Power */ + [0x07] = KEY_TUNER, /* Source */ + [0x1c] = KEY_SEARCH, /* Scan */ + [0x18] = KEY_MUTE, /* Mute */ + + [0x03] = KEY_RADIO, /* TV/FM */ + /* The next four keys are duplicates that appear to send the + same IR code as Ch+, Ch-, >>, and << . The raw code assigned + to them is the actual code + 0x20 - they will never be + detected as such unless some way is discovered to distinguish + these buttons from those that have the same code. */ + [0x3f] = KEY_RIGHT, /* |> and Ch+ */ + [0x37] = KEY_LEFT, /* <| and Ch- */ + [0x2c] = KEY_UP, /* ^^Up and >> */ + [0x24] = KEY_DOWN, /* vvDn and << */ + + [0x00] = KEY_RECORD, /* Record */ + [0x08] = KEY_STOP, /* Stop */ + [0x11] = KEY_PLAY, /* Play */ + + [0x0f] = KEY_CLOSE, /* Minimize */ + [0x19] = KEY_ZOOM, /* Zoom */ + [0x1a] = KEY_SHUFFLE, /* Snapshot */ + [0x0d] = KEY_LANGUAGE, /* MTS */ + + [0x14] = KEY_VOLUMEDOWN, /* Vol- */ + [0x16] = KEY_VOLUMEUP, /* Vol+ */ + [0x17] = KEY_CHANNELDOWN, /* Ch- */ + [0x1f] = KEY_CHANNELUP, /* Ch+ */ + + [0x04] = KEY_REWIND, /* << */ + [0x0e] = KEY_MENU, /* Function */ + [0x0c] = KEY_FASTFORWARD, /* >> */ + [0x1d] = KEY_RESTART, /* Reset */ +}; +EXPORT_SYMBOL_GPL(ir_codes_msi_tvanywhere_plus); + +/* ---------------------------------------------------------------------- */ + /* Cinergy 1400 DVB-T */ IR_KEYTAB_TYPE ir_codes_cinergy_1400[IR_KEYTAB_SIZE] = { [ 0x01 ] = KEY_POWER, diff --git a/drivers/media/video/ir-kbd-i2c.c b/drivers/media/video/ir-kbd-i2c.c index 703195a..efe8499 100644 --- a/drivers/media/video/ir-kbd-i2c.c +++ b/drivers/media/video/ir-kbd-i2c.c @@ -12,6 +12,10 @@ * Markus Rechberger * modified for DViCO Fusion HDTV 5 RT GOLD by * Chaogui Zhang + * modified for MSI TV@nywhere Plus by + * Henry Wong + * Mark Schultz + * Brian Rogers * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -242,9 +246,15 @@ static void ir_timer(unsigned long data) static void ir_work(struct work_struct *work) { struct IR_i2c *ir = container_of(work, struct IR_i2c, work); + int polling_interval = 100; + + /* MSI TV@nywhere Plus requires more frequent polling + otherwise it will miss some keypresses */ + if (ir->c.adapter->id == I2C_HW_SAA7134 && ir->c.addr == 0x30) + polling_interval = 50; ir_key_poll(ir); - mod_timer(&ir->timer, jiffies + msecs_to_jiffies(100)); + mod_timer(&ir->timer, jiffies + msecs_to_jiffies(polling_interval)); } /* ----------------------------------------------------------------------- */ @@ -483,9 +493,37 @@ static int ir_probe(struct i2c_adapter *adap) (1 == rc) ? "yes" : "no"); if (1 == rc) { ir_attach(adap, probe[i], 0, 0); - break; + return 0; } } + + /* Special case for MSI TV@nywhere Plus remote */ + if (adap->id == I2C_HW_SAA7134) { + u8 temp; + + /* MSI TV@nywhere Plus controller doesn't seem to + respond to probes unless we read something from + an existing device. Weird... */ + + msg.addr = 0x50; + rc = i2c_transfer(adap, &msg, 1); + dprintk(1, "probe 0x%02x @ %s: %s\n", + msg.addr, adap->name, + (1 == rc) ? "yes" : "no"); + + /* Now do the probe. The controller does not respond + to 0-byte reads, so we use a 1-byte read instead. */ + msg.addr = 0x30; + msg.len = 1; + msg.buf = &temp; + rc = i2c_transfer(adap, &msg, 1); + dprintk(1, "probe 0x%02x @ %s: %s\n", + msg.addr, adap->name, + (1 == rc) ? "yes" : "no"); + if (1 == rc) + ir_attach(adap, msg.addr, 0, 0); + } + return 0; } diff --git a/drivers/media/video/saa7134/saa7134-cards.c b/drivers/media/video/saa7134/saa7134-cards.c index c9392c4..ddc5402 100644 --- a/drivers/media/video/saa7134/saa7134-cards.c +++ b/drivers/media/video/saa7134/saa7134-cards.c @@ -5969,6 +5969,7 @@ int saa7134_board_init1(struct saa7134_dev *dev) case SAA7134_BOARD_PINNACLE_PCTV_110i: case SAA7134_BOARD_PINNACLE_PCTV_310i: case SAA7134_BOARD_UPMOST_PURPLE_TV: + case SAA7134_BOARD_MSI_TVATANYWHERE_PLUS: case SAA7134_BOARD_HAUPPAUGE_HVR1110: case SAA7134_BOARD_BEHOLD_607_9FM: case SAA7134_BOARD_BEHOLD_M6: diff --git a/drivers/media/video/saa7134/saa7134-i2c.c b/drivers/media/video/saa7134/saa7134-i2c.c index b02965c..20c1b33 100644 --- a/drivers/media/video/saa7134/saa7134-i2c.c +++ b/drivers/media/video/saa7134/saa7134-i2c.c @@ -337,6 +337,7 @@ static int attach_inform(struct i2c_client *client) case 0x47: case 0x71: case 0x2d: + case 0x30: { struct IR_i2c *ir = i2c_get_clientdata(client); d1printk("%s i2c IR detected (%s).\n", diff --git a/drivers/media/video/saa7134/saa7134-input.c b/drivers/media/video/saa7134/saa7134-input.c index 72a1c67..c53fd5f 100644 --- a/drivers/media/video/saa7134/saa7134-input.c +++ b/drivers/media/video/saa7134/saa7134-input.c @@ -118,6 +118,53 @@ static int build_key(struct saa7134_dev *dev) /* --------------------- Chip specific I2C key builders ----------------- */ +static int get_key_msi_tvanywhere_plus(struct IR_i2c *ir, u32 *ir_key, + u32 *ir_raw) +{ + unsigned char b; + int gpio; + + /* is needed to access GPIO. Used by the saa_readl macro. */ + struct saa7134_dev *dev = ir->c.adapter->algo_data; + if (dev == NULL) { + dprintk("get_key_msi_tvanywhere_plus: " + "gir->c.adapter->algo_data is NULL!\n"); + return -EIO; + } + + /* rising SAA7134_GPIO_GPRESCAN reads the status */ + + saa_clearb(SAA7134_GPIO_GPMODE3, SAA7134_GPIO_GPRESCAN); + saa_setb(SAA7134_GPIO_GPMODE3, SAA7134_GPIO_GPRESCAN); + + gpio = saa_readl(SAA7134_GPIO_GPSTATUS0 >> 2); + + /* GPIO&0x40 is pulsed low when a button is pressed. Don't do + I2C receive if gpio&0x40 is not low. */ + + if (gpio & 0x40) + return 0; /* No button press */ + + /* GPIO says there is a button press. Get it. */ + + if (1 != i2c_master_recv(&ir->c, &b, 1)) { + i2cdprintk("read error\n"); + return -EIO; + } + + /* No button press */ + + if (b == 0xff) + return 0; + + /* Button pressed */ + + dprintk("get_key_msi_tvanywhere_plus: Key = 0x%02X\n", b); + *ir_key = b; + *ir_raw = b; + return 1; +} + static int get_key_purpletv(struct IR_i2c *ir, u32 *ir_key, u32 *ir_raw) { unsigned char b; @@ -641,6 +688,11 @@ void saa7134_set_i2c_ir(struct saa7134_dev *dev, struct IR_i2c *ir) ir->get_key = get_key_purpletv; ir->ir_codes = ir_codes_purpletv; break; + case SAA7134_BOARD_MSI_TVATANYWHERE_PLUS: + snprintf(ir->c.name, sizeof(ir->c.name), "MSI TV@nywhere Plus"); + ir->get_key = get_key_msi_tvanywhere_plus; + ir->ir_codes = ir_codes_msi_tvanywhere_plus; + break; case SAA7134_BOARD_HAUPPAUGE_HVR1110: snprintf(ir->c.name, sizeof(ir->c.name), "HVR 1110"); ir->get_key = get_key_hvr1110; diff --git a/include/media/ir-common.h b/include/media/ir-common.h index 436360e..38f2d93 100644 --- a/include/media/ir-common.h +++ b/include/media/ir-common.h @@ -156,6 +156,7 @@ extern IR_KEYTAB_TYPE ir_codes_powercolor_real_angel[IR_KEYTAB_SIZE]; extern IR_KEYTAB_TYPE ir_codes_avermedia_a16d[IR_KEYTAB_SIZE]; extern IR_KEYTAB_TYPE ir_codes_encore_enltv_fm53[IR_KEYTAB_SIZE]; extern IR_KEYTAB_TYPE ir_codes_real_audio_220_32_keys[IR_KEYTAB_SIZE]; +extern IR_KEYTAB_TYPE ir_codes_msi_tvanywhere_plus[IR_KEYTAB_SIZE]; #endif /* -- cgit v0.10.2 From e254a30154c87cc862ba94332a47dad818a8e640 Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Sun, 21 Sep 2008 09:06:29 -0300 Subject: V4L/DVB (9169): uvcvideo: Support two new Bison Electronics webcams. This adds required quirks for the Compaq Presario B1200 and Acer Travelmate 7720 integrated webcams. Signed-off-by: Laurent Pinchart Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/uvc/uvc_driver.c b/drivers/media/video/uvc/uvc_driver.c index fee85a2..d7ad060 100644 --- a/drivers/media/video/uvc/uvc_driver.c +++ b/drivers/media/video/uvc/uvc_driver.c @@ -1912,6 +1912,24 @@ static struct usb_device_id uvc_ids[] = { .bInterfaceSubClass = 1, .bInterfaceProtocol = 0, .driver_info = UVC_QUIRK_PROBE_MINMAX }, + /* Compaq Presario B1200 - Bison Electronics */ + { .match_flags = USB_DEVICE_ID_MATCH_DEVICE + | USB_DEVICE_ID_MATCH_INT_INFO, + .idVendor = 0x5986, + .idProduct = 0x0104, + .bInterfaceClass = USB_CLASS_VIDEO, + .bInterfaceSubClass = 1, + .bInterfaceProtocol = 0, + .driver_info = UVC_QUIRK_PROBE_MINMAX }, + /* Acer Travelmate 7720 - Bison Electronics */ + { .match_flags = USB_DEVICE_ID_MATCH_DEVICE + | USB_DEVICE_ID_MATCH_INT_INFO, + .idVendor = 0x5986, + .idProduct = 0x0105, + .bInterfaceClass = USB_CLASS_VIDEO, + .bInterfaceSubClass = 1, + .bInterfaceProtocol = 0, + .driver_info = UVC_QUIRK_PROBE_MINMAX }, /* Medion Akoya Mini E1210 - Bison Electronics */ { .match_flags = USB_DEVICE_ID_MATCH_DEVICE | USB_DEVICE_ID_MATCH_INT_INFO, -- cgit v0.10.2 From 01a8f038c07c4119029c63f1ed1c6ac986665d48 Mon Sep 17 00:00:00 2001 From: Darron Broad Date: Fri, 3 Oct 2008 11:47:46 -0300 Subject: V4L/DVB (9170): cx24116: Sanity checking to data input via S2API to the cx24116 demod. Add some sanity checking to data input via S2API to the cx24116 demod. This patch is valid for both s2-mfe and s2. It was found when testing KAFFEINE with S2API support that invalid modulation modes amongst other parameters were being delivered to the demod. In order to debug this sanity checking has been added. An example session would involve kaffeine setting QAM_AUTO when querying DVB-T, then later when trying to tune to DVB-S this cached value would be presented in error. Signed-off-by: Darron Broad Signed-off-by: Steven Toth Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/dvb/frontends/cx24116.c b/drivers/media/dvb/frontends/cx24116.c index 02ed4ef..808ef29 100644 --- a/drivers/media/dvb/frontends/cx24116.c +++ b/drivers/media/dvb/frontends/cx24116.c @@ -84,7 +84,8 @@ static int debug = 0; #define CX24116_ROLLOFF_035 (0x02) /* pilot bit */ -#define CX24116_PILOT (0x40) +#define CX24116_PILOT_OFF (0x00) +#define CX24116_PILOT_ON (0x40) /* signal status */ #define CX24116_HAS_SIGNAL (0x01) @@ -148,6 +149,7 @@ struct cx24116_tuning u8 fec_val; u8 fec_mask; u8 inversion_val; + u8 pilot_val; u8 rolloff_val; }; @@ -1121,25 +1123,62 @@ static int cx24116_set_frontend(struct dvb_frontend* fe, struct dvb_frontend_par struct dtv_frontend_properties *c = &fe->dtv_property_cache; struct cx24116_cmd cmd; fe_status_t tunerstat; - int i, status, ret, retune = 1; + int i, status, ret, retune; dprintk("%s()\n",__func__); - state->dnxt.modulation = c->modulation; - state->dnxt.frequency = c->frequency; - switch(c->delivery_system) { case SYS_DVBS: dprintk("%s: DVB-S delivery system selected\n",__func__); - state->dnxt.pilot = PILOT_OFF; + + /* Only QPSK is supported for DVB-S */ + if(c->modulation != QPSK) { + dprintk("%s: unsupported modulation selected (%d)\n", + __func__, c->modulation); + return -EOPNOTSUPP; + } + + /* Pilot doesn't exist in DVB-S, turn bit off */ + state->dnxt.pilot_val = CX24116_PILOT_OFF; + retune = 1; + + /* DVB-S only supports 0.35 */ + if(c->rolloff != ROLLOFF_35) { + dprintk("%s: unsupported rolloff selected (%d)\n", + __func__, c->rolloff); + return -EOPNOTSUPP; + } state->dnxt.rolloff_val = CX24116_ROLLOFF_035; - state->dnxt.rolloff = c->rolloff; break; + case SYS_DVBS2: dprintk("%s: DVB-S2 delivery system selected\n",__func__); - if(c->pilot == PILOT_AUTO) - retune++; - state->dnxt.pilot = c->pilot; + + /* + * NBC 8PSK/QPSK with DVB-S is supported for DVB-S2, + * but not hardware auto detection + */ + if(c->modulation != _8PSK && c->modulation != NBC_QPSK) { + dprintk("%s: unsupported modulation selected (%d)\n", + __func__, c->modulation); + return -EOPNOTSUPP; + } + + switch(c->pilot) { + case PILOT_AUTO: /* Not supported but emulated */ + retune = 2; /* Fall-through */ + case PILOT_OFF: + state->dnxt.pilot_val = CX24116_PILOT_OFF; + break; + case PILOT_ON: + state->dnxt.pilot_val = CX24116_PILOT_ON; + break; + default: + dprintk("%s: unsupported pilot mode selected (%d)\n", + __func__, c->pilot); + return -EOPNOTSUPP; + } + switch(c->rolloff) { case ROLLOFF_20: state->dnxt.rolloff_val= CX24116_ROLLOFF_020; @@ -1150,20 +1189,28 @@ static int cx24116_set_frontend(struct dvb_frontend* fe, struct dvb_frontend_par case ROLLOFF_35: state->dnxt.rolloff_val= CX24116_ROLLOFF_035; break; - case ROLLOFF_AUTO: + case ROLLOFF_AUTO: /* Rolloff must be explicit */ + default: + dprintk("%s: unsupported rolloff selected (%d)\n", + __func__, c->rolloff); return -EOPNOTSUPP; } - state->dnxt.rolloff = c->rolloff; break; + default: dprintk("%s: unsupported delivery system selected (%d)\n", __func__, c->delivery_system); return -EOPNOTSUPP; } + state->dnxt.modulation = c->modulation; + state->dnxt.frequency = c->frequency; + state->dnxt.pilot = c->pilot; + state->dnxt.rolloff = c->rolloff; if ((ret = cx24116_set_inversion(state, c->inversion)) != 0) return ret; + /* FEC_NONE/AUTO for DVB-S2 is not supported and detected here */ if ((ret = cx24116_set_fec(state, c->modulation, c->fec_inner)) != 0) return ret; @@ -1173,10 +1220,13 @@ static int cx24116_set_frontend(struct dvb_frontend* fe, struct dvb_frontend_par /* discard the 'current' tuning parameters and prepare to tune */ cx24116_clone_params(fe); - dprintk("%s: retune = %d\n", __func__, retune); - dprintk("%s: rolloff = %d\n", __func__, state->dcur.rolloff); - dprintk("%s: pilot = %d\n", __func__, state->dcur.pilot); + dprintk("%s: modulation = %d\n", __func__, state->dcur.modulation); dprintk("%s: frequency = %d\n", __func__, state->dcur.frequency); + dprintk("%s: pilot = %d (val = 0x%02x)\n", __func__, + state->dcur.pilot, state->dcur.pilot_val); + dprintk("%s: retune = %d\n", __func__, retune); + dprintk("%s: rolloff = %d (val = 0x%02x)\n", __func__, + state->dcur.rolloff, state->dcur.rolloff_val); dprintk("%s: symbol_rate = %d\n", __func__, state->dcur.symbol_rate); dprintk("%s: FEC = %d (mask/val = 0x%02x/0x%02x)\n", __func__, state->dcur.fec, state->dcur.fec_mask, state->dcur.fec_val); @@ -1210,11 +1260,8 @@ static int cx24116_set_frontend(struct dvb_frontend* fe, struct dvb_frontend_par /* Automatic Inversion */ cmd.args[0x06] = state->dcur.inversion_val; - /* Modulation / FEC & Pilot Off */ - cmd.args[0x07] = state->dcur.fec_val; - - if (state->dcur.pilot == PILOT_ON) - cmd.args[0x07] |= CX24116_PILOT; + /* Modulation / FEC / Pilot */ + cmd.args[0x07] = state->dcur.fec_val | state->dcur.pilot_val; cmd.args[0x08] = CX24116_SEARCH_RANGE_KHZ >> 8; cmd.args[0x09] = CX24116_SEARCH_RANGE_KHZ & 0xff; @@ -1277,7 +1324,7 @@ static int cx24116_set_frontend(struct dvb_frontend* fe, struct dvb_frontend_par /* Toggle pilot bit when in auto-pilot */ if(state->dcur.pilot == PILOT_AUTO) - cmd.args[0x07] ^= CX24116_PILOT; + cmd.args[0x07] ^= CX24116_PILOT_ON; } while(--retune); -- cgit v0.10.2 From 4aae8efb4908fa3f80dc1177d093443bc09adf5f Mon Sep 17 00:00:00 2001 From: Darron Broad Date: Fri, 3 Oct 2008 11:50:00 -0300 Subject: V4L/DVB (9171): S2API: Stop an OOPS if illegal commands are dumped in S2API. Quick fix to stop an OOPS if illegal commands are dumped in S2API. Signed-off-by: Darron Broad Signed-off-by: Steven Toth Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/dvb/dvb-core/dvb_frontend.c b/drivers/media/dvb/dvb-core/dvb_frontend.c index 4c3f0d7..f44b64b 100644 --- a/drivers/media/dvb/dvb-core/dvb_frontend.c +++ b/drivers/media/dvb/dvb-core/dvb_frontend.c @@ -848,6 +848,13 @@ void dtv_property_dump(struct dtv_property *tvp) { int i; + if( (tvp->cmd <= 0 || tvp->cmd > DTV_DELIVERY_SYSTEM) && + tvp->cmd != DTV_API_VERSION) { + printk("%s: tvp.cmd = 0x%08x (undefined/unknown/invalid)\n", + __func__, tvp->cmd); + return; + } + printk("%s() tvp.cmd = 0x%08x (%s)\n" ,__FUNCTION__ ,tvp->cmd -- cgit v0.10.2 From e5cefa82ce31b14574947e570d638a6d58225338 Mon Sep 17 00:00:00 2001 From: Darron Broad Date: Fri, 3 Oct 2008 11:53:18 -0300 Subject: V4L/DVB (9172): S2API: Bugfix related to DVB-S / DVB-S2 tuning for the legacy API. Fixes switching from S2API to legacy where legacy params given to S2API aware demods are cached ones and not those implied in the legacy API. It was found (on an S2API aware demod at least) that after using an S2API aware application and then switching to a legacy application that prior S2API params were in effect were legacy has only implied values. This fixes this. Signed-off-by: Darron Broad Signed-off-by: Steven Toth Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/dvb/dvb-core/dvb_frontend.c b/drivers/media/dvb/dvb-core/dvb_frontend.c index f44b64b..ff8cda0 100644 --- a/drivers/media/dvb/dvb-core/dvb_frontend.c +++ b/drivers/media/dvb/dvb-core/dvb_frontend.c @@ -900,6 +900,8 @@ void dtv_property_cache_sync(struct dvb_frontend *fe, struct dvb_frontend_parame switch (fe->ops.info.type) { case FE_QPSK: + c->modulation = QPSK; /* implied for DVB-S in legacy API */ + c->rolloff = ROLLOFF_35;/* implied for DVB-S */ c->symbol_rate = p->u.qpsk.symbol_rate; c->fec_inner = p->u.qpsk.fec_inner; c->delivery_system = SYS_DVBS; -- cgit v0.10.2 From 82d7669dc3c0e795c24111fed88e9d5d70f209e0 Mon Sep 17 00:00:00 2001 From: Steven Toth Date: Mon, 6 Oct 2008 20:44:04 -0300 Subject: V4L/DVB (9173): S2API: Remove the hardcoded command limit during validation This means that when developers add new commands then they'll be see the DTV_MAX_COMMAND define and will be more likely to modify it, without having to modify the command validation code. Signed-off-by: Steven Toth Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/dvb/dvb-core/dvb_frontend.c b/drivers/media/dvb/dvb-core/dvb_frontend.c index ff8cda0..7fe9b3f 100644 --- a/drivers/media/dvb/dvb-core/dvb_frontend.c +++ b/drivers/media/dvb/dvb-core/dvb_frontend.c @@ -848,8 +848,7 @@ void dtv_property_dump(struct dtv_property *tvp) { int i; - if( (tvp->cmd <= 0 || tvp->cmd > DTV_DELIVERY_SYSTEM) && - tvp->cmd != DTV_API_VERSION) { + if (tvp->cmd <= 0 || tvp->cmd > DTV_MAX_COMMAND) { printk("%s: tvp.cmd = 0x%08x (undefined/unknown/invalid)\n", __func__, tvp->cmd); return; diff --git a/include/linux/dvb/frontend.h b/include/linux/dvb/frontend.h index eb98f8c..1cfcd1a 100644 --- a/include/linux/dvb/frontend.h +++ b/include/linux/dvb/frontend.h @@ -270,6 +270,8 @@ struct dvb_frontend_event { #define DTV_API_VERSION 35 +#define DTV_MAX_COMMAND DTV_API_VERSION + typedef enum fe_pilot { PILOT_ON, PILOT_OFF, -- cgit v0.10.2 From de9be0eaae2a23b1782ae0d271961b83abc6e200 Mon Sep 17 00:00:00 2001 From: "Igor M. Liplianin" Date: Sun, 5 Oct 2008 08:52:18 -0300 Subject: V4L/DVB (9174): Allow custom inittab for ST STV0288 demodulator. Allow custom inittab for ST STV0288 demodulator, as it is needed for DvbWorld USB card. Signed-off-by: Igor M. Liplianin Signed-off-by: Steven Toth Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/dvb/frontends/stv0288.c b/drivers/media/dvb/frontends/stv0288.c index 90e72e7..ff1194d 100644 --- a/drivers/media/dvb/frontends/stv0288.c +++ b/drivers/media/dvb/frontends/stv0288.c @@ -328,16 +328,28 @@ static int stv0288_init(struct dvb_frontend *fe) { struct stv0288_state *state = fe->demodulator_priv; int i; + u8 reg; + u8 val; dprintk("stv0288: init chip\n"); stv0288_writeregI(state, 0x41, 0x04); msleep(50); - for (i = 0; !(stv0288_inittab[i] == 0xff && + /* we have default inittab */ + if (state->config->inittab == NULL) { + for (i = 0; !(stv0288_inittab[i] == 0xff && stv0288_inittab[i + 1] == 0xff); i += 2) - stv0288_writeregI(state, stv0288_inittab[i], - stv0288_inittab[i + 1]); - + stv0288_writeregI(state, stv0288_inittab[i], + stv0288_inittab[i + 1]); + } else { + for (i = 0; ; i += 2) { + reg = state->config->inittab[i]; + val = state->config->inittab[i+1]; + if (reg == 0xff && val == 0xff) + break; + stv0288_writeregI(state, reg, val); + } + } return 0; } diff --git a/drivers/media/dvb/frontends/stv0288.h b/drivers/media/dvb/frontends/stv0288.h index aa0cdd2..f2b53db 100644 --- a/drivers/media/dvb/frontends/stv0288.h +++ b/drivers/media/dvb/frontends/stv0288.h @@ -34,6 +34,8 @@ struct stv0288_config { /* the demodulator's i2c address */ u8 demod_address; + u8* inittab; + /* minimum delay before retuning */ int min_delay_ms; -- cgit v0.10.2 From ceab2fe84987a9b2dbe6107f83ac99c98040abcc Mon Sep 17 00:00:00 2001 From: "Igor M. Liplianin" Date: Sun, 5 Oct 2008 08:57:11 -0300 Subject: V4L/DVB (9175): Remove NULL pointer in stb6000 driver. Remove NULL pointer in stb6000 driver, as it raises error for DvbWorld USB card. Signed-off-by: Igor M. Liplianin Signed-off-by: Steven Toth Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/dvb/frontends/stb6000.c b/drivers/media/dvb/frontends/stb6000.c index 7d65123..0e2cb0d 100644 --- a/drivers/media/dvb/frontends/stb6000.c +++ b/drivers/media/dvb/frontends/stb6000.c @@ -201,12 +201,13 @@ struct dvb_frontend *stb6000_attach(struct dvb_frontend *fe, int addr, struct i2c_adapter *i2c) { struct stb6000_priv *priv = NULL; + u8 b0[] = { 0 }; u8 b1[] = { 0, 0 }; struct i2c_msg msg[2] = { { .addr = addr, .flags = 0, - .buf = NULL, + .buf = b0, .len = 0 }, { .addr = addr, -- cgit v0.10.2 From 8a4949b7e98cbb9e304416ecf6da978e1fb1fb9e Mon Sep 17 00:00:00 2001 From: "Igor M. Liplianin" Date: Sun, 5 Oct 2008 09:11:21 -0300 Subject: V4L/DVB (9176): Add support for DvbWorld USB cards with STV0288 demodulator. Add support for DvbWorld USB cards with STV0288 demodulator. Those cards use Earda EDS-1547 tuner. Signed-off-by: Igor M. Liplianin Signed-off-by: Steven Toth Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/dvb/dvb-usb/Kconfig b/drivers/media/dvb/dvb-usb/Kconfig index 57bb470..3c13bcf 100644 --- a/drivers/media/dvb/dvb-usb/Kconfig +++ b/drivers/media/dvb/dvb-usb/Kconfig @@ -253,6 +253,8 @@ config DVB_USB_DW2102 depends on DVB_USB select DVB_PLL if !DVB_FE_CUSTOMISE select DVB_STV0299 if !DVB_FE_CUSTOMISE + select DVB_STV0288 if !DVB_FE_CUSTOMISE + select DVB_STB6000 if !DVB_FE_CUSTOMISE select DVB_CX24116 if !DVB_FE_CUSTOMISE select DVB_SI21XX if !DVB_FE_CUSTOMISE help diff --git a/drivers/media/dvb/dvb-usb/dw2102.c b/drivers/media/dvb/dvb-usb/dw2102.c index 20ba3f1..ca53df6 100644 --- a/drivers/media/dvb/dvb-usb/dw2102.c +++ b/drivers/media/dvb/dvb-usb/dw2102.c @@ -14,6 +14,9 @@ #include "si21xx.h" #include "stv0299.h" #include "z0194a.h" +#include "stv0288.h" +#include "stb6000.h" +#include "eds1547.h" #include "cx24116.h" #ifndef USB_PID_DW2102 @@ -199,6 +202,78 @@ static int dw2102_serit_i2c_transfer(struct i2c_adapter *adap, mutex_unlock(&d->i2c_mutex); return num; } +static int dw2102_earda_i2c_transfer(struct i2c_adapter *adap, struct i2c_msg msg[], int num) +{ + struct dvb_usb_device *d = i2c_get_adapdata(adap); + int ret = 0; + + if (!d) + return -ENODEV; + if (mutex_lock_interruptible(&d->i2c_mutex) < 0) + return -EAGAIN; + + switch (num) { + case 2: { + /* read */ + /* first write first register number */ + u8 ibuf [msg[1].len + 2], obuf[3]; + obuf[0] = 0xd0; + obuf[1] = msg[0].len; + obuf[2] = msg[0].buf[0]; + ret = dw210x_op_rw(d->udev, 0xc2, 0, 0, + obuf, msg[0].len + 2, DW210X_WRITE_MSG); + /* second read registers */ + ret = dw210x_op_rw(d->udev, 0xc3, 0xd1 , 0, + ibuf, msg[1].len + 2, DW210X_READ_MSG); + memcpy(msg[1].buf, ibuf + 2, msg[1].len); + + break; + } + case 1: + switch (msg[0].addr) { + case 0x68: { + /* write to register */ + u8 obuf[msg[0].len + 2]; + obuf[0] = 0xd0; + obuf[1] = msg[0].len; + memcpy(obuf + 2, msg[0].buf, msg[0].len); + ret = dw210x_op_rw(d->udev, 0xc2, 0, 0, + obuf, msg[0].len + 2, DW210X_WRITE_MSG); + break; + } + case 0x61: { + /* write to tuner */ + u8 obuf[msg[0].len + 2]; + obuf[0] = 0xc2; + obuf[1] = msg[0].len; + memcpy(obuf + 2, msg[0].buf, msg[0].len); + ret = dw210x_op_rw(d->udev, 0xc2, 0, 0, + obuf, msg[0].len + 2, DW210X_WRITE_MSG); + break; + } + case(DW2102_RC_QUERY): { + u8 ibuf[2]; + ret = dw210x_op_rw(d->udev, 0xb8, 0, 0, + ibuf, 2, DW210X_READ_MSG); + memcpy(msg[0].buf, ibuf , 2); + break; + } + case(DW2102_VOLTAGE_CTRL): { + u8 obuf[2]; + obuf[0] = 0x30; + obuf[1] = msg[0].buf[0]; + ret = dw210x_op_rw(d->udev, 0xb2, 0, 0, + obuf, 2, DW210X_WRITE_MSG); + break; + } + } + + break; + } + + mutex_unlock(&d->i2c_mutex); + return num; +} static int dw2104_i2c_transfer(struct i2c_adapter *adap, struct i2c_msg msg[], int num) { @@ -297,6 +372,11 @@ static struct i2c_algorithm dw2102_serit_i2c_algo = { .functionality = dw210x_i2c_func, }; +static struct i2c_algorithm dw2102_earda_i2c_algo = { + .master_xfer = dw2102_earda_i2c_transfer, + .functionality = dw210x_i2c_func, +}; + static struct i2c_algorithm dw2104_i2c_algo = { .master_xfer = dw2104_i2c_transfer, .functionality = dw210x_i2c_func, @@ -378,6 +458,17 @@ static int dw2102_frontend_attach(struct dvb_usb_adapter *d) return 0; } } + if (dw2102_properties.i2c_algo == &dw2102_earda_i2c_algo) { + /*dw2102_properties.adapter->tuner_attach = dw2102_tuner_attach;*/ + d->fe = dvb_attach(stv0288_attach, &earda_config, + &d->dev->i2c_adap); + if (d->fe != NULL) { + d->fe->ops.set_voltage = dw210x_set_voltage; + info("Attached stv0288!\n"); + return 0; + } + } + if (dw2102_properties.i2c_algo == &dw2102_i2c_algo) { /*dw2102_properties.adapter->tuner_attach = dw2102_tuner_attach;*/ d->fe = dvb_attach(stv0299_attach, &sharp_z0194a_config, @@ -398,6 +489,14 @@ static int dw2102_tuner_attach(struct dvb_usb_adapter *adap) return 0; } +static int dw2102_earda_tuner_attach(struct dvb_usb_adapter *adap) +{ + dvb_attach(stb6000_attach, adap->fe, 0x61, + &adap->dev->i2c_adap); + + return 0; +} + static struct dvb_usb_rc_key dw210x_rc_keys[] = { { 0xf8, 0x0a, KEY_Q }, /*power*/ { 0xf8, 0x0c, KEY_M }, /*mute*/ @@ -478,7 +577,7 @@ static int dw2102_load_firmware(struct usb_device *dev, u8 *b, *p; int ret = 0, i; u8 reset; - u8 reset16 [] = {0, 0, 0, 0, 0, 0, 0}; + u8 reset16[] = {0, 0, 0, 0, 0, 0, 0}; const struct firmware *fw; const char *filename = "dvb-usb-dw2101.fw"; switch (dev->descriptor.idProduct) { @@ -544,9 +643,25 @@ static int dw2102_load_firmware(struct usb_device *dev, /* check STV0299 frontend */ dw210x_op_rw(dev, 0xb5, 0, 0, &reset16[0], 2, DW210X_READ_MSG); - if (reset16[0] == 0xa1) + if (reset16[0] == 0xa1) { dw2102_properties.i2c_algo = &dw2102_i2c_algo; - break; + dw2102_properties.adapter->tuner_attach = &dw2102_tuner_attach; + break; + } else { + /* check STV0288 frontend */ + reset16[0] = 0xd0; + reset16[1] = 1; + reset16[2] = 0; + dw210x_op_rw(dev, 0xc2, 0, 0, &reset16[0], 3, + DW210X_WRITE_MSG); + dw210x_op_rw(dev, 0xc3, 0xd1, 0, &reset16[0], 3, + DW210X_READ_MSG); + if (reset16[2] == 0x11) { + dw2102_properties.i2c_algo = &dw2102_earda_i2c_algo; + dw2102_properties.adapter->tuner_attach = &dw2102_earda_tuner_attach; + break; + } + } case 0x2101: dw210x_op_rw(dev, 0xbc, 0x0030, 0, &reset16[0], 2, DW210X_READ_MSG); @@ -586,7 +701,7 @@ static struct dvb_usb_device_properties dw2102_properties = { { .frontend_attach = dw2102_frontend_attach, .streaming_ctrl = NULL, - .tuner_attach = dw2102_tuner_attach, + .tuner_attach = NULL, .stream = { .type = USB_BULK, .count = 8, diff --git a/drivers/media/dvb/frontends/eds1547.h b/drivers/media/dvb/frontends/eds1547.h new file mode 100644 index 0000000..fa79b7c --- /dev/null +++ b/drivers/media/dvb/frontends/eds1547.h @@ -0,0 +1,133 @@ +/* eds1547.h Earda EDS-1547 tuner support +* +* Copyright (C) 2008 Igor M. Liplianin (liplianin@me.by) +* +* This program is free software; you can redistribute it and/or modify it +* under the terms of the GNU General Public License as published by the +* Free Software Foundation, version 2. +* +* see Documentation/dvb/README.dvb-usb for more information +*/ + +#ifndef EDS1547 +#define EDS1547 + +static u8 stv0288_earda_inittab[] = { + 0x01, 0x57, + 0x02, 0x20, + 0x03, 0x8e, + 0x04, 0x8e, + 0x05, 0x12, + 0x06, 0x00, + 0x07, 0x00, + 0x09, 0x00, + 0x0a, 0x04, + 0x0b, 0x00, + 0x0c, 0x00, + 0x0d, 0x00, + 0x0e, 0xd4, + 0x0f, 0x30, + 0x11, 0x44, + 0x12, 0x03, + 0x13, 0x48, + 0x14, 0x84, + 0x15, 0x45, + 0x16, 0xb7, + 0x17, 0x9c, + 0x18, 0x00, + 0x19, 0xa6, + 0x1a, 0x88, + 0x1b, 0x8f, + 0x1c, 0xf0, + 0x20, 0x0b, + 0x21, 0x54, + 0x22, 0x00, + 0x23, 0x00, + 0x2b, 0xff, + 0x2c, 0xf7, + 0x30, 0x00, + 0x31, 0x1e, + 0x32, 0x14, + 0x33, 0x0f, + 0x34, 0x09, + 0x35, 0x0c, + 0x36, 0x05, + 0x37, 0x2f, + 0x38, 0x16, + 0x39, 0xbd, + 0x3a, 0x00, + 0x3b, 0x13, + 0x3c, 0x11, + 0x3d, 0x30, + 0x40, 0x63, + 0x41, 0x04, + 0x42, 0x60, + 0x43, 0x00, + 0x44, 0x00, + 0x45, 0x00, + 0x46, 0x00, + 0x47, 0x00, + 0x4a, 0x00, + 0x50, 0x10, + 0x51, 0x36, + 0x52, 0x09, + 0x53, 0x94, + 0x54, 0x62, + 0x55, 0x29, + 0x56, 0x64, + 0x57, 0x2b, + 0x58, 0x54, + 0x59, 0x86, + 0x5a, 0x00, + 0x5b, 0x9b, + 0x5c, 0x08, + 0x5d, 0x7f, + 0x5e, 0x00, + 0x5f, 0xff, + 0x70, 0x00, + 0x71, 0x00, + 0x72, 0x00, + 0x74, 0x00, + 0x75, 0x00, + 0x76, 0x00, + 0x81, 0x00, + 0x82, 0x3f, + 0x83, 0x3f, + 0x84, 0x00, + 0x85, 0x00, + 0x88, 0x00, + 0x89, 0x00, + 0x8a, 0x00, + 0x8b, 0x00, + 0x8c, 0x00, + 0x90, 0x00, + 0x91, 0x00, + 0x92, 0x00, + 0x93, 0x00, + 0x94, 0x1c, + 0x97, 0x00, + 0xa0, 0x48, + 0xa1, 0x00, + 0xb0, 0xb8, + 0xb1, 0x3a, + 0xb2, 0x10, + 0xb3, 0x82, + 0xb4, 0x80, + 0xb5, 0x82, + 0xb6, 0x82, + 0xb7, 0x82, + 0xb8, 0x20, + 0xb9, 0x00, + 0xf0, 0x00, + 0xf1, 0x00, + 0xf2, 0xc0, + 0xff,0xff, +}; + +static struct stv0288_config earda_config = { + .demod_address = 0x68, + .min_delay_ms = 100, + .inittab = stv0288_earda_inittab, +}; + +#endif -- cgit v0.10.2 From 0a6393ae21d58e85882185ce1e6b0fe28ff2dfa6 Mon Sep 17 00:00:00 2001 From: Steven Toth Date: Mon, 6 Oct 2008 21:06:48 -0300 Subject: V4L/DVB (9177): S2API: Change _8PSK / _16APSK to PSK_8 and APSK_16 ... and cleanup any drivers using them. I've also removed NBC_QPSK and modified the cx24116 driver to check the delivery_type also, removing some excess namespace baggage. Signed-off-by: Steven Toth Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/dvb/dvb-core/dvb_frontend.c b/drivers/media/dvb/dvb-core/dvb_frontend.c index 7fe9b3f..7b4b1a5 100644 --- a/drivers/media/dvb/dvb-core/dvb_frontend.c +++ b/drivers/media/dvb/dvb-core/dvb_frontend.c @@ -1011,9 +1011,9 @@ void dtv_property_adv_params_sync(struct dvb_frontend *fe) p->inversion = c->inversion; switch(c->modulation) { - case _8PSK: - case _16APSK: - case NBC_QPSK: + case PSK_8: + case APSK_16: + case QPSK: p->u.qpsk.symbol_rate = c->symbol_rate; p->u.qpsk.fec_inner = c->fec_inner; break; diff --git a/drivers/media/dvb/frontends/cx24116.c b/drivers/media/dvb/frontends/cx24116.c index 808ef29..30f82cb 100644 --- a/drivers/media/dvb/frontends/cx24116.c +++ b/drivers/media/dvb/frontends/cx24116.c @@ -344,6 +344,7 @@ static int cx24116_set_inversion(struct cx24116_state* state, fe_spectral_invers * a scheme are support. Especially, no auto detect when in S2 mode. */ struct cx24116_modfec { + fe_delivery_system_t delivery_system; fe_modulation_t modulation; fe_code_rate_t fec; u8 mask; /* In DVBS mode this is used to autodetect */ @@ -352,32 +353,32 @@ struct cx24116_modfec { /* QPSK. For unknown rates we set hardware to auto detect 0xfe 0x30 */ /*mod fec mask val */ - { QPSK, FEC_NONE, 0xfe, 0x30 }, - { QPSK, FEC_1_2, 0x02, 0x2e }, /* 00000010 00101110 */ - { QPSK, FEC_2_3, 0x04, 0x2f }, /* 00000100 00101111 */ - { QPSK, FEC_3_4, 0x08, 0x30 }, /* 00001000 00110000 */ - { QPSK, FEC_4_5, 0xfe, 0x30 }, /* 000?0000 ? */ - { QPSK, FEC_5_6, 0x20, 0x31 }, /* 00100000 00110001 */ - { QPSK, FEC_6_7, 0xfe, 0x30 }, /* 0?000000 ? */ - { QPSK, FEC_7_8, 0x80, 0x32 }, /* 10000000 00110010 */ - { QPSK, FEC_8_9, 0xfe, 0x30 }, /* 0000000? ? */ - { QPSK, FEC_AUTO, 0xfe, 0x30 }, + { SYS_DVBS, QPSK, FEC_NONE, 0xfe, 0x30 }, + { SYS_DVBS, QPSK, FEC_1_2, 0x02, 0x2e }, /* 00000010 00101110 */ + { SYS_DVBS, QPSK, FEC_2_3, 0x04, 0x2f }, /* 00000100 00101111 */ + { SYS_DVBS, QPSK, FEC_3_4, 0x08, 0x30 }, /* 00001000 00110000 */ + { SYS_DVBS, QPSK, FEC_4_5, 0xfe, 0x30 }, /* 000?0000 ? */ + { SYS_DVBS, QPSK, FEC_5_6, 0x20, 0x31 }, /* 00100000 00110001 */ + { SYS_DVBS, QPSK, FEC_6_7, 0xfe, 0x30 }, /* 0?000000 ? */ + { SYS_DVBS, QPSK, FEC_7_8, 0x80, 0x32 }, /* 10000000 00110010 */ + { SYS_DVBS, QPSK, FEC_8_9, 0xfe, 0x30 }, /* 0000000? ? */ + { SYS_DVBS, QPSK, FEC_AUTO, 0xfe, 0x30 }, /* NBC-QPSK */ - { NBC_QPSK, FEC_1_2, 0x00, 0x04 }, - { NBC_QPSK, FEC_3_5, 0x00, 0x05 }, - { NBC_QPSK, FEC_2_3, 0x00, 0x06 }, - { NBC_QPSK, FEC_3_4, 0x00, 0x07 }, - { NBC_QPSK, FEC_4_5, 0x00, 0x08 }, - { NBC_QPSK, FEC_5_6, 0x00, 0x09 }, - { NBC_QPSK, FEC_8_9, 0x00, 0x0a }, - { NBC_QPSK, FEC_9_10, 0x00, 0x0b }, + { SYS_DVBS2, QPSK, FEC_1_2, 0x00, 0x04 }, + { SYS_DVBS2, QPSK, FEC_3_5, 0x00, 0x05 }, + { SYS_DVBS2, QPSK, FEC_2_3, 0x00, 0x06 }, + { SYS_DVBS2, QPSK, FEC_3_4, 0x00, 0x07 }, + { SYS_DVBS2, QPSK, FEC_4_5, 0x00, 0x08 }, + { SYS_DVBS2, QPSK, FEC_5_6, 0x00, 0x09 }, + { SYS_DVBS2, QPSK, FEC_8_9, 0x00, 0x0a }, + { SYS_DVBS2, QPSK, FEC_9_10, 0x00, 0x0b }, /* 8PSK */ - { _8PSK, FEC_3_5, 0x00, 0x0c }, - { _8PSK, FEC_2_3, 0x00, 0x0d }, - { _8PSK, FEC_3_4, 0x00, 0x0e }, - { _8PSK, FEC_5_6, 0x00, 0x0f }, - { _8PSK, FEC_8_9, 0x00, 0x10 }, - { _8PSK, FEC_9_10, 0x00, 0x11 }, + { SYS_DVBS2, PSK_8, FEC_3_5, 0x00, 0x0c }, + { SYS_DVBS2, PSK_8, FEC_2_3, 0x00, 0x0d }, + { SYS_DVBS2, PSK_8, FEC_3_4, 0x00, 0x0e }, + { SYS_DVBS2, PSK_8, FEC_5_6, 0x00, 0x0f }, + { SYS_DVBS2, PSK_8, FEC_8_9, 0x00, 0x10 }, + { SYS_DVBS2, PSK_8, FEC_9_10, 0x00, 0x11 }, /* * `val' can be found in the FECSTATUS register when tuning. * FECSTATUS will give the actual FEC in use if tuning was successful. @@ -1158,7 +1159,7 @@ static int cx24116_set_frontend(struct dvb_frontend* fe, struct dvb_frontend_par * NBC 8PSK/QPSK with DVB-S is supported for DVB-S2, * but not hardware auto detection */ - if(c->modulation != _8PSK && c->modulation != NBC_QPSK) { + if(c->modulation != PSK_8 && c->modulation != QPSK) { dprintk("%s: unsupported modulation selected (%d)\n", __func__, c->modulation); return -EOPNOTSUPP; diff --git a/include/linux/dvb/frontend.h b/include/linux/dvb/frontend.h index 1cfcd1a..291dd8e 100644 --- a/include/linux/dvb/frontend.h +++ b/include/linux/dvb/frontend.h @@ -164,9 +164,8 @@ typedef enum fe_modulation { QAM_AUTO, VSB_8, VSB_16, - _8PSK, - _16APSK, - NBC_QPSK, + PSK_8, + APSK_16, DQPSK, } fe_modulation_t; -- cgit v0.10.2 From 8953db793d5bdeea5ac92c9e97f57d3ff8a7dccf Mon Sep 17 00:00:00 2001 From: Steven Toth Date: Mon, 6 Oct 2008 21:20:21 -0300 Subject: V4L/DVB (9178): cx24116: Add module parameter to return SNR as ESNO. I've retained the older percentage code after discussing this with Darron Broad, but made the ESNO option default. Signed-off-by: Steven Toth Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/dvb/frontends/cx24116.c b/drivers/media/dvb/frontends/cx24116.c index 30f82cb..b8acc7b 100644 --- a/drivers/media/dvb/frontends/cx24116.c +++ b/drivers/media/dvb/frontends/cx24116.c @@ -57,8 +57,9 @@ static int debug = 0; #define CX24116_REG_RESET (0x20) /* reset status > 0 */ #define CX24116_REG_SIGNAL (0x9e) /* signal low */ #define CX24116_REG_SSTATUS (0x9d) /* signal high / status */ +#define CX24116_REG_QUALITY8 (0xa3) #define CX24116_REG_QSTATUS (0xbc) -#define CX24116_REG_QUALITY (0xd5) +#define CX24116_REG_QUALITY0 (0xd5) #define CX24116_REG_BER0 (0xc9) #define CX24116_REG_BER8 (0xc8) #define CX24116_REG_BER16 (0xc7) @@ -116,6 +117,9 @@ static int debug = 0; /* DiSEqC tone burst */ static int toneburst = 1; +/* SNR measurements */ +static int esno_snr = 1; + enum cmds { CMD_SET_VCO = 0x10, @@ -703,7 +707,7 @@ static int cx24116_read_signal_strength(struct dvb_frontend* fe, u16* signal_str } /* SNR (0..100)% = (sig & 0xf0) * 10 + (sig & 0x0f) * 10 / 16 */ -static int cx24116_read_snr(struct dvb_frontend* fe, u16* snr) +static int cx24116_read_snr_pct(struct dvb_frontend* fe, u16* snr) { struct cx24116_state *state = fe->demodulator_priv; u8 snr_reading; @@ -714,7 +718,7 @@ static int cx24116_read_snr(struct dvb_frontend* fe, u16* snr) dprintk("%s()\n", __func__); - snr_reading = cx24116_readreg(state, CX24116_REG_QUALITY); + snr_reading = cx24116_readreg(state, CX24116_REG_QUALITY0); if(snr_reading >= 0xa0 /* 100% */) *snr = 0xffff; @@ -728,6 +732,32 @@ static int cx24116_read_snr(struct dvb_frontend* fe, u16* snr) return 0; } +/* The reelbox patches show the value in the registers represents + * ESNO, from 0->30db (values 0->300). We provide this value by + * default. + */ +static int cx24116_read_snr_esno(struct dvb_frontend* fe, u16* snr) +{ + struct cx24116_state *state = fe->demodulator_priv; + + dprintk("%s()\n", __func__); + + *snr = cx24116_readreg(state, CX24116_REG_QUALITY8) << 8 | + cx24116_readreg(state, CX24116_REG_QUALITY0); + + dprintk("%s: raw 0x%04x\n", __func__, *snr); + + return 0; +} + +static int cx24116_read_snr(struct dvb_frontend* fe, u16* snr) +{ + if (esno_snr == 1) + return cx24116_read_snr_esno(fe, snr); + else + return cx24116_read_snr_pct(fe, snr); +} + static int cx24116_read_ucblocks(struct dvb_frontend* fe, u32* ucblocks) { struct cx24116_state *state = fe->demodulator_priv; @@ -1383,6 +1413,9 @@ MODULE_PARM_DESC(debug, "Activates frontend debugging (default:0)"); module_param(toneburst, int, 0644); MODULE_PARM_DESC(toneburst, "DiSEqC toneburst 0=OFF, 1=TONE CACHE, 2=MESSAGE CACHE (default:1)"); +module_param(esno_snr, int, 0644); +MODULE_PARM_DESC(debug, "SNR return units, 0=PERCENTAGE 0-100, 1=ESNO(db * 10) (default:1)"); + MODULE_DESCRIPTION("DVB Frontend module for Conexant cx24116/cx24118 hardware"); MODULE_AUTHOR("Steven Toth"); MODULE_LICENSE("GPL"); -- cgit v0.10.2 From cc7d705e7a2c28ae1bd8b2fd29524277262967ab Mon Sep 17 00:00:00 2001 From: Brandon Philips Date: Mon, 6 Oct 2008 21:31:48 -0300 Subject: V4L/DVB (9179): S2API: frontend.h cleanup Reviewing the code briefly and saw this. You can't change more than DTV_IOCTL_MAX_MSGS at once, not 16. Signed-off-by: Brandon Philips Signed-off-by: Steven Toth Signed-off-by: Mauro Carvalho Chehab diff --git a/include/linux/dvb/frontend.h b/include/linux/dvb/frontend.h index 291dd8e..3d4fab4 100644 --- a/include/linux/dvb/frontend.h +++ b/include/linux/dvb/frontend.h @@ -328,14 +328,14 @@ struct dtv_property { int result; } __attribute__ ((packed)); -/* No more than 16 properties during any given ioctl */ +/* num of properties cannot exceed DTV_IOCTL_MAX_MSGS per ioctl */ +#define DTV_IOCTL_MAX_MSGS 64 + struct dtv_properties { __u32 num; struct dtv_property *props; }; -#define DTV_IOCTL_MAX_MSGS 64 - #define FE_SET_PROPERTY _IOW('o', 82, struct dtv_properties) #define FE_GET_PROPERTY _IOR('o', 83, struct dtv_properties) -- cgit v0.10.2 From a4de91be46b73ec6743b9d76155550e49507723c Mon Sep 17 00:00:00 2001 From: Steven Toth Date: Mon, 6 Oct 2008 21:55:46 -0300 Subject: V4L/DVB (9180): S2API: Added support for DTV_CODE_RATE_HP/LP Reports from users that using the new API for tuning DTV was failing, and the cache was missing some essential items. Signed-off-by: Steven Toth Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/dvb/dvb-core/dvb_frontend.c b/drivers/media/dvb/dvb-core/dvb_frontend.c index 7b4b1a5..104f40b 100644 --- a/drivers/media/dvb/dvb-core/dvb_frontend.c +++ b/drivers/media/dvb/dvb-core/dvb_frontend.c @@ -830,6 +830,16 @@ struct dtv_cmds_h dtv_cmds[] = { .cmd = DTV_DELIVERY_SYSTEM, .set = 1, }, + [DTV_CODE_RATE_HP] = { + .name = "DTV_CODE_RATE_HP", + .cmd = DTV_CODE_RATE_HP, + .set = 1, + }, + [DTV_CODE_RATE_LP] = { + .name = "DTV_CODE_RATE_LP", + .cmd = DTV_CODE_RATE_LP, + .set = 1, + }, /* Get */ [DTV_DISEQC_SLAVE_REPLY] = { .name = "DTV_DISEQC_SLAVE_REPLY", @@ -842,6 +852,16 @@ struct dtv_cmds_h dtv_cmds[] = { .cmd = DTV_API_VERSION, .set = 0, }, + [DTV_CODE_RATE_HP] = { + .name = "DTV_CODE_RATE_HP", + .cmd = DTV_CODE_RATE_HP, + .set = 0, + }, + [DTV_CODE_RATE_LP] = { + .name = "DTV_CODE_RATE_LP", + .cmd = DTV_CODE_RATE_LP, + .set = 0, + }, }; void dtv_property_dump(struct dtv_property *tvp) @@ -1121,6 +1141,12 @@ int dtv_property_process_get(struct dvb_frontend *fe, struct dtv_property *tvp, case DTV_API_VERSION: tvp->u.data = (DVB_API_VERSION << 8) | DVB_API_VERSION_MINOR; break; + case DTV_CODE_RATE_HP: + tvp->u.data = fe->dtv_property_cache.code_rate_HP; + break; + case DTV_CODE_RATE_LP: + tvp->u.data = fe->dtv_property_cache.code_rate_LP; + break; default: r = -1; } @@ -1202,6 +1228,12 @@ int dtv_property_process_set(struct dvb_frontend *fe, struct dtv_property *tvp, r = dvb_frontend_ioctl_legacy(inode, file, FE_SET_TONE, (void *)fe->dtv_property_cache.sectone); break; + case DTV_CODE_RATE_HP: + fe->dtv_property_cache.code_rate_HP = tvp->u.data; + break; + case DTV_CODE_RATE_LP: + fe->dtv_property_cache.code_rate_LP = tvp->u.data; + break; default: r = -1; } diff --git a/include/linux/dvb/frontend.h b/include/linux/dvb/frontend.h index 3d4fab4..6675edf 100644 --- a/include/linux/dvb/frontend.h +++ b/include/linux/dvb/frontend.h @@ -268,8 +268,11 @@ struct dvb_frontend_event { #define DTV_DELIVERY_SYSTEM 17 #define DTV_API_VERSION 35 +#define DTV_API_VERSION 35 +#define DTV_CODE_RATE_HP 36 +#define DTV_CODE_RATE_LP 37 -#define DTV_MAX_COMMAND DTV_API_VERSION +#define DTV_MAX_COMMAND DTV_CODE_RATE_LP typedef enum fe_pilot { PILOT_ON, -- cgit v0.10.2 From b87625f0ccbbc67efba356e73502fa9bbb784b1c Mon Sep 17 00:00:00 2001 From: Steven Toth Date: Mon, 6 Oct 2008 21:56:59 -0300 Subject: V4L/DVB (9181): S2API: Add support fot DTV_GUARD_INTERVAL and DTV_TRANSMISSION_MODE Tuning DVB-T via the S2API was failing, missing some essential items. Signed-off-by: Steven Toth Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/dvb/dvb-core/dvb_frontend.c b/drivers/media/dvb/dvb-core/dvb_frontend.c index 104f40b..0ddc2f4 100644 --- a/drivers/media/dvb/dvb-core/dvb_frontend.c +++ b/drivers/media/dvb/dvb-core/dvb_frontend.c @@ -840,6 +840,16 @@ struct dtv_cmds_h dtv_cmds[] = { .cmd = DTV_CODE_RATE_LP, .set = 1, }, + [DTV_GUARD_INTERVAL] = { + .name = "DTV_GUARD_INTERVAL", + .cmd = DTV_GUARD_INTERVAL, + .set = 1, + }, + [DTV_TRANSMISSION_MODE] = { + .name = "DTV_TRANSMISSION_MODE", + .cmd = DTV_TRANSMISSION_MODE, + .set = 1, + }, /* Get */ [DTV_DISEQC_SLAVE_REPLY] = { .name = "DTV_DISEQC_SLAVE_REPLY", @@ -862,6 +872,16 @@ struct dtv_cmds_h dtv_cmds[] = { .cmd = DTV_CODE_RATE_LP, .set = 0, }, + [DTV_GUARD_INTERVAL] = { + .name = "DTV_GUARD_INTERVAL", + .cmd = DTV_GUARD_INTERVAL, + .set = 0, + }, + [DTV_TRANSMISSION_MODE] = { + .name = "DTV_TRANSMISSION_MODE", + .cmd = DTV_TRANSMISSION_MODE, + .set = 0, + }, }; void dtv_property_dump(struct dtv_property *tvp) @@ -1147,6 +1167,12 @@ int dtv_property_process_get(struct dvb_frontend *fe, struct dtv_property *tvp, case DTV_CODE_RATE_LP: tvp->u.data = fe->dtv_property_cache.code_rate_LP; break; + case DTV_GUARD_INTERVAL: + tvp->u.data = fe->dtv_property_cache.guard_interval; + break; + case DTV_TRANSMISSION_MODE: + tvp->u.data = fe->dtv_property_cache.transmission_mode; + break; default: r = -1; } @@ -1234,6 +1260,12 @@ int dtv_property_process_set(struct dvb_frontend *fe, struct dtv_property *tvp, case DTV_CODE_RATE_LP: fe->dtv_property_cache.code_rate_LP = tvp->u.data; break; + case DTV_GUARD_INTERVAL: + fe->dtv_property_cache.guard_interval = tvp->u.data; + break; + case DTV_TRANSMISSION_MODE: + fe->dtv_property_cache.transmission_mode = tvp->u.data; + break; default: r = -1; } diff --git a/include/linux/dvb/frontend.h b/include/linux/dvb/frontend.h index 6675edf..5578fba 100644 --- a/include/linux/dvb/frontend.h +++ b/include/linux/dvb/frontend.h @@ -271,8 +271,10 @@ struct dvb_frontend_event { #define DTV_API_VERSION 35 #define DTV_CODE_RATE_HP 36 #define DTV_CODE_RATE_LP 37 +#define DTV_GUARD_INTERVAL 38 +#define DTV_TRANSMISSION_MODE 39 -#define DTV_MAX_COMMAND DTV_CODE_RATE_LP +#define DTV_MAX_COMMAND DTV_TRANSMISSION_MODE typedef enum fe_pilot { PILOT_ON, -- cgit v0.10.2 From ef526f4246f566370218bb6e639f7549244ca5a2 Mon Sep 17 00:00:00 2001 From: Steven Toth Date: Mon, 6 Oct 2008 22:01:47 -0300 Subject: V4L/DVB (9182): S2API: Added support for DTV_HIERARCHY A user tuning DVB-T via the S2API reports that this was not implemented, and his tuning was failing. Signed-off-by: Steven Toth Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/dvb/dvb-core/dvb_frontend.c b/drivers/media/dvb/dvb-core/dvb_frontend.c index 0ddc2f4..bd59c95 100644 --- a/drivers/media/dvb/dvb-core/dvb_frontend.c +++ b/drivers/media/dvb/dvb-core/dvb_frontend.c @@ -830,6 +830,11 @@ struct dtv_cmds_h dtv_cmds[] = { .cmd = DTV_DELIVERY_SYSTEM, .set = 1, }, + [DTV_HIERARCHY] = { + .name = "DTV_HIERARCHY", + .cmd = DTV_HIERARCHY, + .set = 1, + }, [DTV_CODE_RATE_HP] = { .name = "DTV_CODE_RATE_HP", .cmd = DTV_CODE_RATE_HP, @@ -882,6 +887,11 @@ struct dtv_cmds_h dtv_cmds[] = { .cmd = DTV_TRANSMISSION_MODE, .set = 0, }, + [DTV_HIERARCHY] = { + .name = "DTV_HIERARCHY", + .cmd = DTV_HIERARCHY, + .set = 0, + }, }; void dtv_property_dump(struct dtv_property *tvp) @@ -1173,6 +1183,9 @@ int dtv_property_process_get(struct dvb_frontend *fe, struct dtv_property *tvp, case DTV_TRANSMISSION_MODE: tvp->u.data = fe->dtv_property_cache.transmission_mode; break; + case DTV_HIERARCHY: + tvp->u.data = fe->dtv_property_cache.hierarchy; + break; default: r = -1; } @@ -1266,6 +1279,9 @@ int dtv_property_process_set(struct dvb_frontend *fe, struct dtv_property *tvp, case DTV_TRANSMISSION_MODE: fe->dtv_property_cache.transmission_mode = tvp->u.data; break; + case DTV_HIERARCHY: + fe->dtv_property_cache.hierarchy = tvp->u.data; + break; default: r = -1; } diff --git a/include/linux/dvb/frontend.h b/include/linux/dvb/frontend.h index 5578fba..e185627 100644 --- a/include/linux/dvb/frontend.h +++ b/include/linux/dvb/frontend.h @@ -273,8 +273,9 @@ struct dvb_frontend_event { #define DTV_CODE_RATE_LP 37 #define DTV_GUARD_INTERVAL 38 #define DTV_TRANSMISSION_MODE 39 +#define DTV_HIERARCHY 40 -#define DTV_MAX_COMMAND DTV_TRANSMISSION_MODE +#define DTV_MAX_COMMAND DTV_HIERARCHY typedef enum fe_pilot { PILOT_ON, -- cgit v0.10.2 From 6068f5063850984fe6c2490bc8384a7afa2728dc Mon Sep 17 00:00:00 2001 From: Steven Toth Date: Mon, 6 Oct 2008 22:46:08 -0300 Subject: V4L/DVB (9183): S2API: Return error of the caller provides 0 commands. S2API: Return error of the caller provides 0 commands. Signed-off-by: Steven Toth Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/dvb/dvb-core/dvb_frontend.c b/drivers/media/dvb/dvb-core/dvb_frontend.c index bd59c95..f170e82 100644 --- a/drivers/media/dvb/dvb-core/dvb_frontend.c +++ b/drivers/media/dvb/dvb-core/dvb_frontend.c @@ -1344,7 +1344,7 @@ static int dvb_frontend_ioctl_properties(struct inode *inode, struct file *file, /* Put an arbitrary limit on the number of messages that can * be sent at once */ - if (tvps->num > DTV_IOCTL_MAX_MSGS) + if ((tvps->num == 0) || (tvps->num > DTV_IOCTL_MAX_MSGS)) return -EINVAL; tvp = (struct dtv_property *) kmalloc(tvps->num * @@ -1379,7 +1379,7 @@ static int dvb_frontend_ioctl_properties(struct inode *inode, struct file *file, /* Put an arbitrary limit on the number of messages that can * be sent at once */ - if (tvps->num > DTV_IOCTL_MAX_MSGS) + if ((tvps->num == 0) || (tvps->num > DTV_IOCTL_MAX_MSGS)) return -EINVAL; tvp = (struct dtv_property *) kmalloc(tvps->num * -- cgit v0.10.2 From b40d29e0afac38f4ce6cb1db400a60f36c5cabee Mon Sep 17 00:00:00 2001 From: Steven Toth Date: Tue, 7 Oct 2008 13:10:12 -0300 Subject: V4L/DVB (9184): cx24116: Change the default SNR units back to percentage by default. cx24116: Change the default SNR units back to percentage by default. Signed-off-by: Steven Toth Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/dvb/frontends/cx24116.c b/drivers/media/dvb/frontends/cx24116.c index b8acc7b..deb36f4 100644 --- a/drivers/media/dvb/frontends/cx24116.c +++ b/drivers/media/dvb/frontends/cx24116.c @@ -118,7 +118,7 @@ static int debug = 0; static int toneburst = 1; /* SNR measurements */ -static int esno_snr = 1; +static int esno_snr = 0; enum cmds { @@ -1414,7 +1414,7 @@ module_param(toneburst, int, 0644); MODULE_PARM_DESC(toneburst, "DiSEqC toneburst 0=OFF, 1=TONE CACHE, 2=MESSAGE CACHE (default:1)"); module_param(esno_snr, int, 0644); -MODULE_PARM_DESC(debug, "SNR return units, 0=PERCENTAGE 0-100, 1=ESNO(db * 10) (default:1)"); +MODULE_PARM_DESC(debug, "SNR return units, 0=PERCENTAGE 0-100, 1=ESNO(db * 10) (default:0)"); MODULE_DESCRIPTION("DVB Frontend module for Conexant cx24116/cx24118 hardware"); MODULE_AUTHOR("Steven Toth"); -- cgit v0.10.2 From a52f68c648585ff615175269d8f6cbcbb08d7f4d Mon Sep 17 00:00:00 2001 From: Darron Broad Date: Tue, 7 Oct 2008 17:30:45 -0300 Subject: V4L/DVB (9185): S2API: Ensure we have a reasonable ROLLOFF default Non-initialised cache values get a reasonble default. Signed-off-by: Darron Broad Signed-off-by: Steven Toth Signed-off-by: Mauro Carvalho Chehab diff --git a/include/linux/dvb/frontend.h b/include/linux/dvb/frontend.h index e185627..6e4ace2 100644 --- a/include/linux/dvb/frontend.h +++ b/include/linux/dvb/frontend.h @@ -284,9 +284,9 @@ typedef enum fe_pilot { } fe_pilot_t; typedef enum fe_rolloff { + ROLLOFF_35, /* Implied value in DVB-S, default for DVB-S2 */ ROLLOFF_20, ROLLOFF_25, - ROLLOFF_35, ROLLOFF_AUTO, } fe_rolloff_t; -- cgit v0.10.2 From 57f51dbc45f65f7ee1e8c8f77200bb8000e3e271 Mon Sep 17 00:00:00 2001 From: Oleg Roitburd Date: Wed, 8 Oct 2008 06:48:08 -0300 Subject: V4L/DVB (9186): Added support for Prof 7300 DVB-S/S2 cards Added support for Prof 7300 DVB-S/S2 card. The card based on cx24116 demodulator. Signed-off-by: Oleg Roitburd Signed-off-by: Steven Toth [mchehab@redhat.com: fixed CARDLIST.cx88 entry] Signed-off-by: Mauro Carvalho Chehab diff --git a/Documentation/video4linux/CARDLIST.cx88 b/Documentation/video4linux/CARDLIST.cx88 index 50d0b1c..a5227e3 100644 --- a/Documentation/video4linux/CARDLIST.cx88 +++ b/Documentation/video4linux/CARDLIST.cx88 @@ -73,3 +73,4 @@ 72 -> TBS 8920 DVB-S/S2 [8920:8888] 73 -> TeVii S420 DVB-S [d420:9022] 74 -> Prolink Pixelview Global Extreme [1554:4976] + 75 -> PROF 7300 DVB-S/S2 [B033:3033] diff --git a/drivers/media/video/cx88/cx88-cards.c b/drivers/media/video/cx88/cx88-cards.c index a9e52de..5da04e81 100644 --- a/drivers/media/video/cx88/cx88-cards.c +++ b/drivers/media/video/cx88/cx88-cards.c @@ -1822,6 +1822,18 @@ static const struct cx88_board cx88_boards[] = { } }, .mpeg = CX88_MPEG_DVB, }, + [CX88_BOARD_PROF_7300] = { + .name = "PROF 7300 DVB-S/S2", + .tuner_type = UNSET, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .input = {{ + .type = CX88_VMUX_DVB, + .vmux = 0, + } }, + .mpeg = CX88_MPEG_DVB, + }, }; /* ------------------------------------------------------------------ */ @@ -2211,6 +2223,10 @@ static const struct cx88_subid cx88_subids[] = { .subvendor = 0x8920, .subdevice = 0x8888, .card = CX88_BOARD_TBS_8920, + }, { + .subvendor = 0xB033, + .subdevice = 0x3033, + .card = CX88_BOARD_PROF_7300, }, }; @@ -2817,18 +2833,9 @@ static void cx88_card_setup(struct cx88_core *core) } case CX88_BOARD_TEVII_S420: case CX88_BOARD_TEVII_S460: - cx_write(MO_SRST_IO, 0); - msleep(100); - cx_write(MO_SRST_IO, 1); - msleep(100); - break; case CX88_BOARD_OMICOM_SS4_PCI: - cx_write(MO_SRST_IO, 0); - msleep(100); - cx_write(MO_SRST_IO, 1); - msleep(100); - break; case CX88_BOARD_TBS_8920: + case CX88_BOARD_PROF_7300: cx_write(MO_SRST_IO, 0); msleep(100); cx_write(MO_SRST_IO, 1); diff --git a/drivers/media/video/cx88/cx88-dvb.c b/drivers/media/video/cx88/cx88-dvb.c index cccf382..344ed26 100644 --- a/drivers/media/video/cx88/cx88-dvb.c +++ b/drivers/media/video/cx88/cx88-dvb.c @@ -978,15 +978,8 @@ static int dvb_register(struct cx8802_dev *dev) } break; case CX88_BOARD_OMICOM_SS4_PCI: - dev->dvb.frontend = dvb_attach(cx24116_attach, - &hauppauge_hvr4000_config, - &core->i2c_adap); - if (dev->dvb.frontend != NULL) { - core->prev_set_voltage = dev->dvb.frontend->ops.set_voltage; - dev->dvb.frontend->ops.set_voltage = tevii_dvbs_set_voltage; - } - break; case CX88_BOARD_TBS_8920: + case CX88_BOARD_PROF_7300: dev->dvb.frontend = dvb_attach(cx24116_attach, &hauppauge_hvr4000_config, &core->i2c_adap); diff --git a/drivers/media/video/cx88/cx88.h b/drivers/media/video/cx88/cx88.h index dce7d36..dbf01b8 100644 --- a/drivers/media/video/cx88/cx88.h +++ b/drivers/media/video/cx88/cx88.h @@ -228,6 +228,7 @@ extern struct sram_channel cx88_sram_channels[]; #define CX88_BOARD_TBS_8920 72 #define CX88_BOARD_TEVII_S420 73 #define CX88_BOARD_PROLINK_PV_GLOBAL_XTREME 74 +#define CX88_BOARD_PROF_7300 75 enum cx88_itype { CX88_VMUX_COMPOSITE1 = 1, -- cgit v0.10.2