From 54d0a216f40e060ba4265bb851cc36b3ca55d1a8 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Sun, 9 Jul 2006 21:38:56 +0100 Subject: [MIPS] Replace board_timer_setup function pointer by plat_timer_setup. Signed-off-by: Ralf Baechle --- diff --git a/Documentation/mips/time.README b/Documentation/mips/time.README index 70bc0dd..69ddc5c 100644 --- a/Documentation/mips/time.README +++ b/Documentation/mips/time.README @@ -65,7 +65,7 @@ the following functions or values: 1. (optional) set up RTC routines 2. (optional) calibrate and set the mips_counter_frequency - b) board_timer_setup - a function pointer. Invoked at the end of time_init() + b) plat_timer_setup - a function pointer. Invoked at the end of time_init() 1. (optional) over-ride any decisions made in time_init() 2. set up the irqaction for timer interrupt. 3. enable the timer interrupt @@ -116,19 +116,17 @@ Step 2: the machine setup() function If you supply board_time_init(), set the function poointer. - Set the function pointer board_timer_setup() (mandatory) - -Step 3: implement rtc routines, board_time_init() and board_timer_setup() +Step 3: implement rtc routines, board_time_init() and plat_timer_setup() if needed. - board_time_init() - + board_time_init() - a) (optional) set up RTC routines, b) (optional) calibrate and set the mips_counter_frequency (only needed if you intended to use fixed_rate_gettimeoffset or use cpu counter as timer interrupt source) - board_timer_setup() - + plat_timer_setup() - a) (optional) over-write any choices made above by time_init(). b) machine specific code should setup the timer irqaction. c) enable the timer interrupt diff --git a/arch/mips/au1000/common/setup.c b/arch/mips/au1000/common/setup.c index cc5138c..377ae0d 100644 --- a/arch/mips/au1000/common/setup.c +++ b/arch/mips/au1000/common/setup.c @@ -51,7 +51,6 @@ extern void au1000_power_off(void); extern void au1x_time_init(void); extern void au1x_timer_setup(struct irqaction *irq); extern void au1xxx_time_init(void); -extern void au1xxx_timer_setup(struct irqaction *irq); extern void set_cpuspec(void); void __init plat_mem_setup(void) @@ -123,7 +122,6 @@ void __init plat_mem_setup(void) _machine_halt = au1000_halt; pm_power_off = au1000_power_off; board_time_init = au1xxx_time_init; - board_timer_setup = au1xxx_timer_setup; /* IO/MEM resources. */ set_io_port_base(0); diff --git a/arch/mips/au1000/common/time.c b/arch/mips/au1000/common/time.c index 7e988b0..7fbea1b 100644 --- a/arch/mips/au1000/common/time.c +++ b/arch/mips/au1000/common/time.c @@ -383,7 +383,7 @@ static unsigned long do_fast_pm_gettimeoffset(void) } #endif -void __init au1xxx_timer_setup(struct irqaction *irq) +void __init plat_timer_setup(struct irqaction *irq) { unsigned int est_freq; diff --git a/arch/mips/basler/excite/excite_setup.c b/arch/mips/basler/excite/excite_setup.c index e1d6ad2..a1ce458 100644 --- a/arch/mips/basler/excite/excite_setup.c +++ b/arch/mips/basler/excite/excite_setup.c @@ -78,7 +78,7 @@ static void excite_timer_init(void) mips_hpt_frequency = EXCITE_CPU_EXT_CLOCK * mult / div / 2; } -static void excite_timer_setup(struct irqaction *irq) +void __init plat_timer_setup(struct irqaction *irq) { /* The eXcite platform uses the alternate timer interrupt */ set_c0_intcontrol(0x80); @@ -262,7 +262,6 @@ void __init plat_mem_setup(void) /* Set up timer initialization hooks */ board_time_init = excite_timer_init; - board_timer_setup = excite_timer_setup; /* Set up the peripheral address map */ *(boot_ocd_base + (LKB9 / sizeof (u32))) = 0; diff --git a/arch/mips/cobalt/setup.c b/arch/mips/cobalt/setup.c index c997145..c01a017 100644 --- a/arch/mips/cobalt/setup.c +++ b/arch/mips/cobalt/setup.c @@ -49,7 +49,7 @@ const char *get_system_type(void) return "MIPS Cobalt"; } -static void __init cobalt_timer_setup(struct irqaction *irq) +void __init plat_timer_setup(struct irqaction *irq) { /* Load timer value for 1KHz (TCLK is 50MHz) */ GALILEO_OUTL(50*1000*1000 / 1000, GT_TC0_OFS); @@ -129,8 +129,6 @@ void __init plat_mem_setup(void) _machine_halt = cobalt_machine_halt; pm_power_off = cobalt_machine_power_off; - board_timer_setup = cobalt_timer_setup; - set_io_port_base(CKSEG1ADDR(GT64111_IO_BASE)); /* I/O port resource must include UART and LCD/buttons */ diff --git a/arch/mips/ddb5xxx/ddb5477/setup.c b/arch/mips/ddb5xxx/ddb5477/setup.c index 904c8f4..f0cc0e8 100644 --- a/arch/mips/ddb5xxx/ddb5477/setup.c +++ b/arch/mips/ddb5xxx/ddb5477/setup.c @@ -147,7 +147,7 @@ static void __init ddb_time_init(void) mips_hpt_frequency = bus_frequency*(i+4)/4; } -static void __init ddb_timer_setup(struct irqaction *irq) +void __init plat_timer_setup(struct irqaction *irq) { #if defined(USE_CPU_COUNTER_TIMER) @@ -177,7 +177,6 @@ void __init plat_mem_setup(void) set_io_port_base(KSEG1ADDR(DDB_PCI_IO_BASE)); board_time_init = ddb_time_init; - board_timer_setup = ddb_timer_setup; _machine_restart = ddb_machine_restart; _machine_halt = ddb_machine_halt; diff --git a/arch/mips/dec/setup.c b/arch/mips/dec/setup.c index 2684f12..d43241c 100644 --- a/arch/mips/dec/setup.c +++ b/arch/mips/dec/setup.c @@ -145,13 +145,11 @@ static void __init dec_be_init(void) extern void dec_time_init(void); -extern void dec_timer_setup(struct irqaction *); void __init plat_mem_setup(void) { board_be_init = dec_be_init; board_time_init = dec_time_init; - board_timer_setup = dec_timer_setup; wbflush_setup(); diff --git a/arch/mips/dec/time.c b/arch/mips/dec/time.c index 76e4d09..5729474 100644 --- a/arch/mips/dec/time.c +++ b/arch/mips/dec/time.c @@ -186,7 +186,7 @@ void __init dec_time_init(void) EXPORT_SYMBOL(do_settimeofday); -void __init dec_timer_setup(struct irqaction *irq) +void __init plat_timer_setup(struct irqaction *irq) { setup_irq(dec_interrupt[DEC_IRQ_RTC], irq); diff --git a/arch/mips/emma2rh/markeins/setup.c b/arch/mips/emma2rh/markeins/setup.c index 25da5bc2..b29a447 100644 --- a/arch/mips/emma2rh/markeins/setup.c +++ b/arch/mips/emma2rh/markeins/setup.c @@ -104,7 +104,7 @@ static void __init emma2rh_time_init(void) mips_hpt_frequency = (bus_frequency * (4 + reg)) / 4 / 2; } -static void __init emma2rh_timer_setup(struct irqaction *irq) +void __init plat_timer_setup(struct irqaction *irq) { /* we are using the cpu counter for timer interrupts */ setup_irq(CPU_IRQ_BASE + 7, irq); @@ -149,7 +149,6 @@ void __init plat_mem_setup(void) set_io_port_base(KSEG1ADDR(EMMA2RH_PCI_IO_BASE)); board_time_init = emma2rh_time_init; - board_timer_setup = emma2rh_timer_setup; _machine_restart = markeins_machine_restart; _machine_halt = markeins_machine_halt; diff --git a/arch/mips/gt64120/wrppmc/setup.c b/arch/mips/gt64120/wrppmc/setup.c index 221d808..429afc4 100644 --- a/arch/mips/gt64120/wrppmc/setup.c +++ b/arch/mips/gt64120/wrppmc/setup.c @@ -127,7 +127,6 @@ static void wrppmc_setup_serial(void) void __init plat_mem_setup(void) { extern void wrppmc_time_init(void); - extern void wrppmc_timer_setup(struct irqaction *); extern void wrppmc_machine_restart(char *command); extern void wrppmc_machine_halt(void); extern void wrppmc_machine_power_off(void); @@ -138,7 +137,6 @@ void __init plat_mem_setup(void) /* Use MIPS Count/Compare Timer */ board_time_init = wrppmc_time_init; - board_timer_setup = wrppmc_timer_setup; /* This makes the operations of 'in/out[bwl]' to the * physical address ( < KSEG0) can work via KSEG1 diff --git a/arch/mips/gt64120/wrppmc/time.c b/arch/mips/gt64120/wrppmc/time.c index c8ed57e..5b44085 100644 --- a/arch/mips/gt64120/wrppmc/time.c +++ b/arch/mips/gt64120/wrppmc/time.c @@ -26,7 +26,7 @@ #define WRPPMC_CPU_CLK_FREQ 40000000 /* 40MHZ */ -void __init wrppmc_timer_setup(struct irqaction *irq) +void __init plat_timer_setup(struct irqaction *irq) { /* Install ISR for timer interrupt */ setup_irq(WRPPMC_MIPS_TIMER_IRQ, irq); diff --git a/arch/mips/ite-boards/generic/it8172_setup.c b/arch/mips/ite-boards/generic/it8172_setup.c index 0c657b4..07faf3c 100644 --- a/arch/mips/ite-boards/generic/it8172_setup.c +++ b/arch/mips/ite-boards/generic/it8172_setup.c @@ -60,7 +60,6 @@ extern void it8172_halt(void); extern void it8172_power_off(void); extern void it8172_time_init(void); -extern void it8172_timer_setup(struct irqaction *irq); #ifdef CONFIG_IT8172_REVC struct { @@ -168,7 +167,6 @@ void __init plat_mem_setup(void) clear_c0_status(ST0_FR); board_time_init = it8172_time_init; - board_timer_setup = it8172_timer_setup; _machine_restart = it8172_restart; _machine_halt = it8172_halt; diff --git a/arch/mips/ite-boards/generic/time.c b/arch/mips/ite-boards/generic/time.c index dee497a..3dc5556 100644 --- a/arch/mips/ite-boards/generic/time.c +++ b/arch/mips/ite-boards/generic/time.c @@ -233,7 +233,8 @@ void __init it8172_time_init(void) } #define ALLINTS (IE_IRQ0 | IE_IRQ1 | IE_IRQ2 | IE_IRQ3 | IE_IRQ4 | IE_IRQ5) -void __init it8172_timer_setup(struct irqaction *irq) + +void __init plat_timer_setup(struct irqaction *irq) { puts("timer_setup\n"); put32(NR_IRQS); diff --git a/arch/mips/jazz/setup.c b/arch/mips/jazz/setup.c index 385413e..487a9ea 100644 --- a/arch/mips/jazz/setup.c +++ b/arch/mips/jazz/setup.c @@ -37,7 +37,7 @@ extern void jazz_machine_restart(char *command); extern void jazz_machine_halt(void); extern void jazz_machine_power_off(void); -static void __init jazz_time_init(struct irqaction *irq) +void __init plat_time_init(struct irqaction *irq) { /* set the clock to 100 Hz */ r4030_write_reg32(JAZZ_TIMER_INTERVAL, 9); @@ -75,7 +75,6 @@ void __init plat_mem_setup(void) for (i = 0; i < ARRAY_SIZE(jazz_io_resources); i++) request_resource(&ioport_resource, jazz_io_resources + i); - board_timer_setup = jazz_time_init; /* The RTC is outside the port address space */ _machine_restart = jazz_machine_restart; diff --git a/arch/mips/jmr3927/rbhma3100/setup.c b/arch/mips/jmr3927/rbhma3100/setup.c index 36d22b9..0254340 100644 --- a/arch/mips/jmr3927/rbhma3100/setup.c +++ b/arch/mips/jmr3927/rbhma3100/setup.c @@ -185,7 +185,7 @@ static void __init jmr3927_time_init(void) unsigned long jmr3927_do_gettimeoffset(void); -static void __init jmr3927_timer_setup(struct irqaction *irq) +void __init plat_timer_setup(struct irqaction *irq) { do_gettimeoffset = jmr3927_do_gettimeoffset; @@ -244,7 +244,6 @@ void __init plat_mem_setup(void) set_io_port_base(JMR3927_PORT_BASE + JMR3927_PCIIO); board_time_init = jmr3927_time_init; - board_timer_setup = jmr3927_timer_setup; _machine_restart = jmr3927_machine_restart; _machine_halt = jmr3927_machine_halt; diff --git a/arch/mips/kernel/smtc.c b/arch/mips/kernel/smtc.c index 5b17a3d..604bcc5 100644 --- a/arch/mips/kernel/smtc.c +++ b/arch/mips/kernel/smtc.c @@ -577,7 +577,7 @@ void smtc_init_secondary(void) { /* * Start timer on secondary VPEs if necessary. - * mips_timer_setup should already have been invoked by init/main + * plat_timer_setup has already have been invoked by init/main * on "boot" TC. Like per_cpu_trap_init() hack, this assumes that * SMTC init code assigns TCs consdecutively and in ascending order * to across available VPEs. diff --git a/arch/mips/kernel/time.c b/arch/mips/kernel/time.c index 2393c11..170cb67 100644 --- a/arch/mips/kernel/time.c +++ b/arch/mips/kernel/time.c @@ -566,14 +566,13 @@ asmlinkage void ll_local_timer_interrupt(int irq, struct pt_regs *regs) * 2) setup xtime based on rtc_mips_get_time(). * 3) choose a appropriate gettimeoffset routine. * 4) calculate a couple of cached variables for later usage - * 5) board_timer_setup() - + * 5) plat_timer_setup() - * a) (optional) over-write any choices made above by time_init(). * b) machine specific code should setup the timer irqaction. * c) enable the timer interrupt */ void (*board_time_init)(void); -void (*board_timer_setup)(struct irqaction *irq); unsigned int mips_hpt_frequency; @@ -718,7 +717,7 @@ void __init time_init(void) * to be NULL function so that we are sure the high-level code * is not invoked accidentally. */ - board_timer_setup(&timer_irqaction); + plat_timer_setup(&timer_irqaction); } #define FEBRUARY 2 diff --git a/arch/mips/lasat/setup.c b/arch/mips/lasat/setup.c index 2187e63..0ffc43c 100644 --- a/arch/mips/lasat/setup.c +++ b/arch/mips/lasat/setup.c @@ -115,12 +115,9 @@ static void lasat_time_init(void) mips_hpt_frequency = lasat_board_info.li_cpu_hz / 2; } -static void lasat_timer_setup(struct irqaction *irq) +void __init plat_timer_setup(struct irqaction *irq) { - - write_c0_compare( - read_c0_count() + - mips_hpt_frequency / HZ); + write_c0_compare( read_c0_count() + mips_hpt_frequency / HZ); change_c0_status(ST0_IM, IE_IRQ0 | IE_IRQ5); } @@ -170,7 +167,6 @@ void __init plat_mem_setup(void) lasat_reboot_setup(); board_time_init = lasat_time_init; - board_timer_setup = lasat_timer_setup; #ifdef CONFIG_DS1603 ds1603 = &ds_defs[mips_machtype]; diff --git a/arch/mips/mips-boards/atlas/atlas_setup.c b/arch/mips/mips-boards/atlas/atlas_setup.c index 3a7c3d2..9871a91 100644 --- a/arch/mips/mips-boards/atlas/atlas_setup.c +++ b/arch/mips/mips-boards/atlas/atlas_setup.c @@ -35,7 +35,6 @@ extern void mips_reboot_setup(void); extern void mips_time_init(void); -extern void mips_timer_setup(struct irqaction *irq); extern unsigned long mips_rtc_get_time(void); #ifdef CONFIG_KGDB @@ -63,7 +62,6 @@ void __init plat_mem_setup(void) mips_reboot_setup(); board_time_init = mips_time_init; - board_timer_setup = mips_timer_setup; rtc_mips_get_time = mips_rtc_get_time; } diff --git a/arch/mips/mips-boards/generic/time.c b/arch/mips/mips-boards/generic/time.c index 5e20776..8e846d1 100644 --- a/arch/mips/mips-boards/generic/time.c +++ b/arch/mips/mips-boards/generic/time.c @@ -245,7 +245,7 @@ void __init mips_time_init(void) local_irq_restore(flags); } -void __init mips_timer_setup(struct irqaction *irq) +void __init plat_timer_setup(struct irqaction *irq) { if (cpu_has_veic) { set_vi_handler (MSC01E_INT_CPUCTR, mips_timer_dispatch); diff --git a/arch/mips/mips-boards/malta/malta_setup.c b/arch/mips/mips-boards/malta/malta_setup.c index 7a54195..ab460f8 100644 --- a/arch/mips/mips-boards/malta/malta_setup.c +++ b/arch/mips/mips-boards/malta/malta_setup.c @@ -44,7 +44,6 @@ extern void mips_reboot_setup(void); extern void mips_time_init(void); -extern void mips_timer_setup(struct irqaction *irq); extern unsigned long mips_rtc_get_time(void); #ifdef CONFIG_KGDB @@ -223,6 +222,5 @@ void __init plat_mem_setup(void) mips_reboot_setup(); board_time_init = mips_time_init; - board_timer_setup = mips_timer_setup; rtc_mips_get_time = mips_rtc_get_time; } diff --git a/arch/mips/mips-boards/sead/sead_setup.c b/arch/mips/mips-boards/sead/sead_setup.c index a856bd6..a189dec 100644 --- a/arch/mips/mips-boards/sead/sead_setup.c +++ b/arch/mips/mips-boards/sead/sead_setup.c @@ -35,7 +35,6 @@ extern void mips_reboot_setup(void); extern void mips_time_init(void); -extern void mips_timer_setup(struct irqaction *irq); static void __init serial_init(void); @@ -51,7 +50,6 @@ void __init plat_mem_setup(void) serial_init (); board_time_init = mips_time_init; - board_timer_setup = mips_timer_setup; mips_reboot_setup(); } diff --git a/arch/mips/mips-boards/sim/sim_setup.c b/arch/mips/mips-boards/sim/sim_setup.c index 3d4a785..2659c1c 100644 --- a/arch/mips/mips-boards/sim/sim_setup.c +++ b/arch/mips/mips-boards/sim/sim_setup.c @@ -37,7 +37,6 @@ extern void sim_time_init(void); -extern void sim_timer_setup(struct irqaction *irq); static void __init serial_init(void); unsigned int _isbonito = 0; @@ -56,7 +55,6 @@ void __init plat_mem_setup(void) serial_init(); board_time_init = sim_time_init; - board_timer_setup = sim_timer_setup; prom_printf("Linux started...\n"); #ifdef CONFIG_MT_SMP diff --git a/arch/mips/momentum/jaguar_atx/setup.c b/arch/mips/momentum/jaguar_atx/setup.c index b08e6a0..e6fe299 100644 --- a/arch/mips/momentum/jaguar_atx/setup.c +++ b/arch/mips/momentum/jaguar_atx/setup.c @@ -212,7 +212,7 @@ int m48t37y_set_time(unsigned long sec) return 0; } -void momenco_timer_setup(struct irqaction *irq) +void __init plat_timer_setup(struct irqaction *irq) { setup_irq(8, irq); } @@ -226,7 +226,6 @@ void momenco_time_init(void) wire_stupidity_into_tlb(); mips_hpt_frequency = cpu_clock / 2; - board_timer_setup = momenco_timer_setup; rtc_mips_get_time = m48t37y_get_time; rtc_mips_set_time = m48t37y_set_time; diff --git a/arch/mips/momentum/ocelot_3/setup.c b/arch/mips/momentum/ocelot_3/setup.c index 8c53490..435d078 100644 --- a/arch/mips/momentum/ocelot_3/setup.c +++ b/arch/mips/momentum/ocelot_3/setup.c @@ -197,7 +197,7 @@ int m48t37y_set_time(unsigned long sec) return 0; } -void momenco_timer_setup(struct irqaction *irq) +void __init plat_timer_setup(struct irqaction *irq) { setup_irq(7, irq); /* Timer interrupt, unmask status IM7 */ } @@ -211,7 +211,6 @@ void momenco_time_init(void) * the Rm7900 and the Rm7065C */ mips_hpt_frequency = cpu_clock / 2; - board_timer_setup = momenco_timer_setup; rtc_mips_get_time = m48t37y_get_time; rtc_mips_set_time = m48t37y_set_time; diff --git a/arch/mips/momentum/ocelot_c/setup.c b/arch/mips/momentum/ocelot_c/setup.c index 6a45199..36f570e 100644 --- a/arch/mips/momentum/ocelot_c/setup.c +++ b/arch/mips/momentum/ocelot_c/setup.c @@ -209,7 +209,7 @@ int m48t37y_set_time(unsigned long sec) return 0; } -void momenco_timer_setup(struct irqaction *irq) +void __init plat_timer_setup(struct irqaction *irq) { setup_irq(7, irq); } @@ -224,7 +224,6 @@ void momenco_time_init(void) #error Unknown CPU for this board #endif printk("momenco_time_init cpu_clock=%d\n", cpu_clock); - board_timer_setup = momenco_timer_setup; rtc_mips_get_time = m48t37y_get_time; rtc_mips_set_time = m48t37y_set_time; diff --git a/arch/mips/philips/pnx8550/common/setup.c b/arch/mips/philips/pnx8550/common/setup.c index 57fc593..36b0c8b 100644 --- a/arch/mips/philips/pnx8550/common/setup.c +++ b/arch/mips/philips/pnx8550/common/setup.c @@ -50,7 +50,6 @@ extern void pnx8550_machine_power_off(void); extern struct resource ioport_resource; extern struct resource iomem_resource; extern void pnx8550_time_init(void); -extern void pnx8550_timer_setup(struct irqaction *irq); extern void rs_kgdb_hook(int tty_no); extern void prom_printf(char *fmt, ...); extern char *prom_getcmdline(void); @@ -109,7 +108,6 @@ void __init plat_mem_setup(void) pm_power_off = pnx8550_machine_power_off; board_time_init = pnx8550_time_init; - board_timer_setup = pnx8550_timer_setup; /* Clear the Global 2 Register, PCI Inta Output Enable Registers Bit 1:Enable DAC Powerdown diff --git a/arch/mips/philips/pnx8550/common/time.c b/arch/mips/philips/pnx8550/common/time.c index 70664ea..0af655b 100644 --- a/arch/mips/philips/pnx8550/common/time.c +++ b/arch/mips/philips/pnx8550/common/time.c @@ -70,16 +70,7 @@ void pnx8550_time_init(void) mips_hpt_frequency = 27UL * ((1000000UL * n)/(m * pow2p)); } -/* - * pnx8550_timer_setup() - it does the following things: - * - * 5) board_timer_setup() - - * a) (optional) over-write any choices made above by time_init(). - * b) machine specific code should setup the timer irqaction. - * c) enable the timer interrupt - */ - -void __init pnx8550_timer_setup(struct irqaction *irq) +void __init plat_timer_setup(struct irqaction *irq) { int configPR; diff --git a/arch/mips/pmc-sierra/yosemite/setup.c b/arch/mips/pmc-sierra/yosemite/setup.c index aa0d6ff..0a6ee8e 100644 --- a/arch/mips/pmc-sierra/yosemite/setup.c +++ b/arch/mips/pmc-sierra/yosemite/setup.c @@ -133,14 +133,13 @@ int m48t37y_set_time(unsigned long sec) return 0; } -void yosemite_timer_setup(struct irqaction *irq) +void __init plat_timer_setup(struct irqaction *irq) { setup_irq(7, irq); } void yosemite_time_init(void) { - board_timer_setup = yosemite_timer_setup; mips_hpt_frequency = cpu_clock / 2; mips_hpt_frequency = 33000000 * 3 * 5; } diff --git a/arch/mips/qemu/q-setup.c b/arch/mips/qemu/q-setup.c index e100d60..8413943 100644 --- a/arch/mips/qemu/q-setup.c +++ b/arch/mips/qemu/q-setup.c @@ -11,7 +11,7 @@ const char *get_system_type(void) return "Qemu"; } -static void __init qemu_timer_setup(struct irqaction *irq) +void __init plat_timer_setup(struct irqaction *irq) { /* set the clock to 100 Hz */ outb_p(0x34,0x43); /* binary, mode 2, LSB/MSB, ch 0 */ @@ -23,7 +23,5 @@ static void __init qemu_timer_setup(struct irqaction *irq) void __init plat_mem_setup(void) { set_io_port_base(QEMU_PORT_BASE); - board_timer_setup = qemu_timer_setup; - qemu_reboot_setup(); } diff --git a/arch/mips/sgi-ip22/ip22-time.c b/arch/mips/sgi-ip22/ip22-time.c index 0bae605..4aeb4c5 100644 --- a/arch/mips/sgi-ip22/ip22-time.c +++ b/arch/mips/sgi-ip22/ip22-time.c @@ -7,7 +7,7 @@ * Ralf Baechle or David S. Miller (sorry guys, i'm really not sure) * * Copyright (C) 2001 by Ladislav Michl - * Copyright (C) 2003 Ralf Baechle (ralf@linux-mips.org) + * Copyright (C) 2003, 06 Ralf Baechle (ralf@linux-mips.org) */ #include #include @@ -199,7 +199,7 @@ void indy_r4k_timer_interrupt(struct pt_regs *regs) irq_exit(); } -static void indy_timer_setup(struct irqaction *irq) +void __init plat_timer_setup(struct irqaction *irq) { /* over-write the handler, we use our own way */ irq->handler = no_action; @@ -215,5 +215,4 @@ void __init ip22_time_init(void) rtc_mips_set_time = indy_rtc_set_time; board_time_init = indy_time_init; - board_timer_setup = indy_timer_setup; } diff --git a/arch/mips/sgi-ip27/ip27-timer.c b/arch/mips/sgi-ip27/ip27-timer.c index 04522fa..b029ba7 100644 --- a/arch/mips/sgi-ip27/ip27-timer.c +++ b/arch/mips/sgi-ip27/ip27-timer.c @@ -1,5 +1,5 @@ /* - * Copytight (C) 1999, 2000, 05 Ralf Baechle (ralf@linux-mips.org) + * Copytight (C) 1999, 2000, 05, 06 Ralf Baechle (ralf@linux-mips.org) * Copytight (C) 1999, 2000 Silicon Graphics, Inc. */ #include @@ -225,7 +225,7 @@ static struct irqaction rt_irqaction = { extern int allocate_irqno(void); -static void ip27_timer_setup(struct irqaction *irq) +void __init plat_timer_setup(struct irqaction *irq) { int irqno = allocate_irqno(); @@ -256,8 +256,6 @@ void __init ip27_time_init(void) xtime.tv_nsec = 0; do_gettimeoffset = ip27_do_gettimeoffset; - - board_timer_setup = ip27_timer_setup; } void __init cpu_time_init(void) diff --git a/arch/mips/sgi-ip32/ip32-setup.c b/arch/mips/sgi-ip32/ip32-setup.c index 240a2f9..57708fe 100644 --- a/arch/mips/sgi-ip32/ip32-setup.c +++ b/arch/mips/sgi-ip32/ip32-setup.c @@ -7,6 +7,7 @@ * * Copyright (C) 2000 Harald Koerfgen * Copyright (C) 2002, 2003, 2005 Ilya A. Volynets + * Copyright (C) 2006 Ralf Baechle */ #include #include @@ -80,7 +81,7 @@ void __init ip32_time_init(void) printk("%d MHz CPU detected\n", mips_hpt_frequency * 2 / 1000000); } -void __init ip32_timer_setup(struct irqaction *irq) +void __init plat_timer_setup(struct irqaction *irq) { irq->handler = no_action; setup_irq(IP32_R4K_TIMER_IRQ, irq); @@ -94,7 +95,6 @@ void __init plat_mem_setup(void) rtc_mips_set_mmss = mc146818_set_rtc_mmss; board_time_init = ip32_time_init; - board_timer_setup = ip32_timer_setup; #ifdef CONFIG_SERIAL_8250 { diff --git a/arch/mips/sibyte/swarm/setup.c b/arch/mips/sibyte/swarm/setup.c index 2996e33..ac342f5 100644 --- a/arch/mips/sibyte/swarm/setup.c +++ b/arch/mips/sibyte/swarm/setup.c @@ -77,7 +77,7 @@ void __init swarm_time_init(void) #endif } -void __init swarm_timer_setup(struct irqaction *irq) +void __init plat_timer_setup(struct irqaction *irq) { /* * we don't set up irqaction, because we will deliver timer @@ -117,7 +117,6 @@ void __init plat_mem_setup(void) panic_timeout = 5; /* For debug. */ board_time_init = swarm_time_init; - board_timer_setup = swarm_timer_setup; board_be_handler = swarm_be_handler; if (xicor_probe()) { diff --git a/arch/mips/sni/setup.c b/arch/mips/sni/setup.c index e5646b0..4e98feb 100644 --- a/arch/mips/sni/setup.c +++ b/arch/mips/sni/setup.c @@ -41,7 +41,7 @@ extern void sni_machine_restart(char *command); extern void sni_machine_halt(void); extern void sni_machine_power_off(void); -static void __init sni_rm200_pci_timer_setup(struct irqaction *irq) +void __init plat_timer_setup(struct irqaction *irq) { /* set the clock to 100 Hz */ outb_p(0x34,0x43); /* binary, mode 2, LSB/MSB, ch 0 */ @@ -270,7 +270,6 @@ void __init plat_mem_setup(void) #endif sni_resource_init(); - board_timer_setup = sni_rm200_pci_timer_setup; _machine_restart = sni_machine_restart; _machine_halt = sni_machine_halt; diff --git a/arch/mips/tx4927/common/tx4927_setup.c b/arch/mips/tx4927/common/tx4927_setup.c index 64a1b39..3ace403 100644 --- a/arch/mips/tx4927/common/tx4927_setup.c +++ b/arch/mips/tx4927/common/tx4927_setup.c @@ -50,7 +50,6 @@ #undef DEBUG void __init tx4927_time_init(void); -void __init tx4927_timer_setup(struct irqaction *irq); void dump_cp0(char *key); @@ -66,7 +65,6 @@ static void tx4927_write_buffer_flush(void) void __init plat_mem_setup(void) { board_time_init = tx4927_time_init; - board_timer_setup = tx4927_timer_setup; __wbflush = tx4927_write_buffer_flush; #ifdef CONFIG_TOSHIBA_RBTX4927 @@ -91,7 +89,7 @@ void __init tx4927_time_init(void) } -void __init tx4927_timer_setup(struct irqaction *irq) +void __init plat_timer_setup(struct irqaction *irq) { u32 count; u32 c1; diff --git a/arch/mips/tx4938/common/setup.c b/arch/mips/tx4938/common/setup.c index ef59a5c..71859c4f 100644 --- a/arch/mips/tx4938/common/setup.c +++ b/arch/mips/tx4938/common/setup.c @@ -39,7 +39,6 @@ extern void rbtx4938_time_init(void); void __init tx4938_setup(void); void __init tx4938_time_init(void); -void __init tx4938_timer_setup(struct irqaction *irq); void dump_cp0(char *key); void (*__wbflush) (void); @@ -64,7 +63,6 @@ void __init plat_mem_setup(void) { board_time_init = tx4938_time_init; - board_timer_setup = tx4938_timer_setup; __wbflush = tx4938_write_buffer_flush; toshiba_rbtx4938_setup(); } @@ -75,8 +73,7 @@ tx4938_time_init(void) rbtx4938_time_init(); } -void __init -tx4938_timer_setup(struct irqaction *irq) +void __init plat_timer_setup(struct irqaction *irq) { u32 count; u32 c1; diff --git a/arch/mips/vr41xx/common/init.c b/arch/mips/vr41xx/common/init.c index 915bfa5..625f22f 100644 --- a/arch/mips/vr41xx/common/init.c +++ b/arch/mips/vr41xx/common/init.c @@ -47,7 +47,7 @@ static void __init setup_timer_frequency(void) mips_hpt_frequency = tclock / 4; } -static void __init setup_timer_irq(struct irqaction *irq) +void __init plat_timer_setup(struct irqaction *irq) { setup_irq(TIMER_IRQ, irq); } @@ -55,7 +55,6 @@ static void __init setup_timer_irq(struct irqaction *irq) static void __init timer_init(void) { board_time_init = setup_timer_frequency; - board_timer_setup = setup_timer_irq; } void __init plat_mem_setup(void) diff --git a/include/asm-mips/time.h b/include/asm-mips/time.h index d897c8b..2d54373 100644 --- a/include/asm-mips/time.h +++ b/include/asm-mips/time.h @@ -83,11 +83,11 @@ extern asmlinkage void ll_local_timer_interrupt(int irq, struct pt_regs *regs); /* * board specific routines required by time_init(). * board_time_init is defaulted to NULL and can remain so. - * board_timer_setup must be setup properly in machine setup routine. + * plat_timer_setup must be setup properly in machine setup routine. */ struct irqaction; extern void (*board_time_init)(void); -extern void (*board_timer_setup)(struct irqaction *irq); +extern void plat_timer_setup(struct irqaction *irq); /* * mips_hpt_frequency - must be set if you intend to use an R4k-compatible -- cgit v0.10.2